| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Option -L/RE/ of blame/log now searches relative to the previous -L
range, if any. Document this.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is complicated slightly by having to remember the previous -L range
for each file specified via -L<range>:file.
The existing implementation coalesces ranges for each file as each -L is
parsed which makes it impossible to refer back to the previous -L range
for any particular file. Re-implement to instead store each file's set
of -L ranges verbatim, and then coalesce the ranges in a post-processing
step.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Range specification -L/RE/ for blame/log unconditionally begins
searching at line one. Mailing list discussion [1] suggests that, in the
presence of multiple -L options, -L/RE/ should search relative to the
endpoint of the previous -L range, if any.
Teach the parsing machinery underlying blame's and log's -L options to
accept a start point for -L/RE/ searches. Follow-up patches will upgrade
blame and log to take advantage of this ability.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/229755/focus=229966
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-blame accepts only a single -L option or none. Clients requiring
blame information for multiple disjoint ranges are therefore forced
either to invoke git-blame multiple times, once for each range, or only
once with no -L option to cover the entire file, both of which can be
costly. Teach git-blame to accept multiple -L ranges. Overlapping and
out-of-order ranges are accepted.
In this patch, the X in -LX,Y is absolute (for instance, /RE/ patterns
search from line 1), and Y is relative to X. Follow-up patches provide
more flexibility over how X is anchored.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As of 25ed3412 (Refactor parse_loc; 2013-03-28),
blame.c:prepare_blame_range() became effectively a one-line function
which merely passes its arguments along to another function. This
indirection does not bring clarity to the code. Simplify by inlining
prepare_blame_range() into its lone caller.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-blame is slated to accept multiple -L ranges. git-log already
accepts multiple -L's but its implementation of range-set, which
organizes and normalizes -L ranges, is private. Publish the small
subset of range-set API which is needed for git-blame multiple -L
support.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
blame/log documentation describes -L option as:
-L<start>,<end>
-L:<regex>
<start> and <end> can take one of these forms:
* number
* /regex/
* +offset or -offset
* :regex
which is incorrect and confusing since :regex is not one of the valid
forms of <start> or <end>; in fact, it must be -L's lone argument.
Clarify by discussing :<regex> at the same indentation level as "<start>
and <end>...":
-L<start>,<end>
-L:<regex>
<start> and <end> can take one of these forms:
* number
* /regex/
* +offset or -offset
If :<regex> is given in place of <start> and <end> ...
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Standard practice in Git documentation is for each variation of an
option (such as: -p / --porcelain) to be placed on its own line in the
OPTIONS table. The -L option does not follow suit. It cuddles "-L
<start>,<end>:<file>" and "-L :<regex>:<file>", separated by a comma.
This is inconsistent and potentially confusing since the comma
separating them is typeset the same as the comma in "<start>,<end>". Fix
this by placing each variation on its own line.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Empty ranges -L,+0 and -L,-0 are nonsensical in the context of blame yet
they are accepted (in fact, both are interpreted as -L1,Y where Y is
end-of-file). Report them as invalid.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Empty ranges -L,+0 and -L,-0 are nonsensical in the context of blame yet
they are accepted. They should be errors. Demonstrate this shortcoming.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Empty ranges -LX,+0 and -LX,-0 are nonsensical in the context of blame
yet they are accepted (in fact, both are interpreted as -LX,+2). Report
them as invalid.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Empty ranges -LX,+0 and -LX,-0 are nonsensical in the context of blame
yet they are accepted. They should be errors. Demonstrate this
shortcoming.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 12da1d1f added -L support to git-log, a broken bounds check was
copied from git-blame -L which incorrectly allows -LX to extend one line
past end of file without reporting an error. Instead, it generates an
empty range. Fix this bug.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
58960978 and 99780b0a added tests which demonstrated bugs (crashes) in
range-set and line-log when handed empty ranges specified via "log
-LX:file" where X is one greater than the last line of the file. After
these tests were added, it was realized that the ability to specify an
empty range is a loophole due to a bug in -L bounds checking. That bug
is slated to be fixed in a subsequent patch.
Unfortunately, the closure of this loophole makes it impossible to
continue checking range-set and line-log behavior with regard to empty
ranges since there is no other way to specify empty ranges via the
command-line. APIs of both facilities are private (file static) so
there likewise is no way to test their behaviors programmatically.
Consequently, retire these two tests.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A bounds checking bug allows the X in -LX to extend one line past the
end of file. For example, given a file with 5 lines, -L6 is accepted as
valid. Demonstrate this problem.
While here, also add tests to check that the remaining cases of X and Y
in -LX,Y are handled correctly at and in the vicinity of end-of-file.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since inception, -LX,Y has correctly reported an out-of-range error when
Y is beyond end of file, however, X was not checked, and an out-of-range
X would cause a crash. 92f9e273 (blame: prevent a segv when -L given
start > EOF; 2010-02-08) attempted to rectify this shortcoming but has
its own off-by-one error which allows X to extend one line past end of
file. For example, given a file with 5 lines:
git blame -L5 foo # OK, blames line 5
git blame -L6 foo # accepted, no error, no output, huh?
git blame -L7 foo # error "fatal: file foo has only 5 lines"
Fix this bug.
In order to avoid regressing "blame foo" when foo is an empty file, the
fix is slightly more complicated than changing '<' to '<='.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add boundary case tests, with and without -L, for empty file; file with
one partial line; file with one full line.
The empty file test without -L is of particular interest. Historically,
this case has been supported (empty blame output) and this test protects
against regression by a subsequent patch fixing an off-by-one bug which
incorrectly accepts -LX where X is one past end-of-file.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A bounds checking bug allows the X in -LX to extend one line past the
end of file. For example, given a file with 5 lines, -L6 is accepted as
valid. Demonstrate this problem.
While here, also add tests to check that the remaining cases of X and Y
in -LX,Y are handled correctly at and in the vicinity of end-of-file.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Checking all bogus -L syntax forms in a single test makes it difficult
to identify the offender when one case fails. Decompose this
conglomerate test in order to check each bad syntax case separately.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* es/blame-L-breakage:
t8001, t8002: fix "blame -L :literal" test on NetBSD
|
|
Sub-test 42 of t8001 and t8002 ("blame -L :literal") fails on NetBSD
with the following verbose output:
git annotate -L:main hello.c
Author F (expected 4, attributed 3) bad
Author G (expected 1, attributed 1) good
This is not caused by different behaviour of git blame or annotate on
that platform, but by different test input, in turn caused by a sed
command that forgets to add a newline on NetBSD. Here's the diff of the
commit that adds "goodbye" to hello.c, for Linux:
@@ -1,4 +1,5 @@
int main(int argc, const char *argv[])
{
puts("hello");
+ puts("goodbye");
}
We see that it adds an extra TAB, but that's not a problem. Here's the
same on NetBSD:
@@ -1,4 +1,4 @@
int main(int argc, const char *argv[])
{
puts("hello");
-}
+ puts("goodbye");}
It also adds an extra TAB, but it is missing the newline character
after the semicolon.
The following patch gets rid of the extra TAB at the beginning, but
more importantly adds the missing newline at the end in a (hopefully)
portable way, mentioned in http://sed.sourceforge.net/sedfaq4.html.
The diff becomes this, on both Linux and NetBSD:
@@ -1,4 +1,5 @@
int main(int argc, const char *argv[])
{
puts("hello");
+ puts("goodbye");
}
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://github.com/git-l10n/git-po:
l10n: zh_CN.po: translate 99 messages (2133t0f0u)
l10n: vi.po (2133t)
l10n: git.pot: v1.8.4 round 1 (99 new, 46 removed)
|
|
* sb/mailmap-updates:
.mailmap: Multiple addresses of Michael S. Tsirkin
|
|
* dn/test-reject-utf-16:
t3900: test rejecting log message with NULs correctly
Add missing test file for UTF-16.
|
|
* bc/commit-invalid-utf8:
commit: typofix for xxFFF[EF] check
|
|
We wanted to catch all codepoints that ends with FFFE and FFFF,
not with 0FFFE and 0FFFF.
Noticed and corrected by Peter Krefting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not like that our longer term desire is to someday start
accept log messages with NULs in them, so it is wrong to mark a test
that demonstrates "git commit" that correctly fails given such an
input as "expect-failure". "git commit" should fail today, and it
should fail the same way in the future given a message with NUL in it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test file that the UTF-16 rejection test looks for is missing, but this went
unnoticed because the test is expected to fail anyway; as a consequence, the
test fails because the file containing the commit message is missing, and not
because the test file contains a NUL byte. Fix this by including a sample text
file containing a commit message encoded in UTF-16.
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net>
Tested-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Translate 99 new messages came from git.pot update in 28b3cff
(l10n: git.pot: v1.8.4 round 1 (99 new, 46 removed)).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Cygwin port added a "not quite correct but a lot faster and good
enough for many lstat() calls that are only used to see if the
working tree entity matches the index entry" lstat() emulation some
time ago, and it started biting us in places. This removes it and
uses the standard lstat() that comes with Cygwin.
Recent topic that uses lstat on packed-refs file is broken when
this cheating lstat is used, and this is a simplest fix that is
also the cleanest direction to go in the long run.
* rj/cygwin-clarify-use-of-cheating-lstat:
cygwin: Remove the Win32 l/stat() implementation
|
|
* jk/cat-file-batch-optim:
Revert "cat-file: split --batch input lines on whitespace"
|
|
This reverts commit c334b87b30c1464a1ab563fe1fb8de5eaf0e5bac; the
update assumed that people only used the command to read from
"rev-list --objects" output, whose lines begin with a 40-hex object
name followed by a whitespace, but it turns out that scripts feed
random extended SHA-1 expressions (e.g. "HEAD:$pathname") in which
a whitespace has to be kept.
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ob/typofixes:
many small typofixes
|
|
* ms/subtree-install-fix:
contrib/subtree: Fix make install target
|
|
Consolidate two messages phrased subtly differently without a good
reason.
* jc/rm-submodule-error-message:
builtin/rm.c: consolidate error reporting for removing submodules
|
|
* lf/echo-n-is-not-portable:
Avoid using `echo -n` anywhere
|
|
* ma/hg-to-git:
hg-to-git: --allow-empty-message in git commit
|
|
* jx/clean-interactive:
git-clean: implement partial matching for selection
Documentation/git-clean: fix description for range
|
|
We spell config variables in camelCase instead of with_underscores.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/rebase-autostash:
git-rebase: fix typo
|
|
* rj/commit-slab-fix:
commit-slab.h: Fix memory allocation and addressing
|
|
* jk/commit-how-to-abort-cherry-pick:
commit: tweak empty cherry pick advice for sequencer
|
|
* ds/doc-two-kinds-of-tags:
docs/git-tag: explain lightweight versus annotated tags
|
|
* rr/maint-tilde-markup-in-doc:
config doc: quote paths, fixing tilde-interpretation
|
|
Fix a NULL-pointer dereference during nested iterations over
references (for example, when replace references are being used).
* mh/packed-refs-do-one-ref-recursion:
do_one_ref(): save and restore value of current_ref
|
Eric Sunshine
Junio C Hamano
René Scharfe
Brian M. Carlson
Stefan Beller
Jiang Xin
Thomas Rast