| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A partial clone that is configured to lazily fetch missing objects
will on-demand issue a "git fetch" request to the originating
repository to fill not-yet-obtained objects. The request has been
optimized for requesting a tree object (and not the leaf blob
objects contained in it) by telling the originating repository that
no blobs are needed.
* jt/non-blob-lazy-fetch:
fetch-pack: exclude blobs when lazy-fetching trees
fetch-pack: avoid object flags if no_dependents
|
|
A corner-case bugfix.
* sm/show-superproject-while-conflicted:
rev-parse: --show-superproject-working-tree should work during a merge
|
|
The code in "git status" sometimes hit an assertion failure. This
was caused by a structure that was reused without cleaning the data
used for the first run, which has been corrected.
* en/status-multiple-renames-to-the-same-target-fix:
commit: fix erroneous BUG, 'multiple renames on the same target? how?'
|
|
The mailmap file update.
* jn/mailmap-update:
mailmap: consistently normalize brian m. carlson's name
|
|
The recently introduced commit-graph auxiliary data is incompatible
with mechanisms such as replace & grafts that "breaks" immutable
nature of the object reference relationship. Disable optimizations
based on its use (and updating existing commit-graph) when these
incompatible features are in use in the repository.
* ds/commit-graph-with-grafts:
commit-graph: close_commit_graph before shallow walk
commit-graph: not compatible with uninitialized repo
commit-graph: not compatible with grafts
commit-graph: not compatible with replace objects
test-repository: properly init repo
commit-graph: update design document
refs.c: upgrade for_each_replace_ref to be a each_repo_ref_fn callback
refs.c: migrate internal ref iteration to pass thru repository argument
|
|
Recently added "range-diff" had a corner-case bug to cause it
segfault, which has been corrected.
* tg/range-diff-corner-case-fix:
linear-assignment: fix potential out of bounds memory access
|
|
"git update-ref" learned to make both "--no-deref" and "--stdin"
work at the same time.
* en/update-ref-no-deref-stdin:
update-ref: allow --no-deref with --stdin
update-ref: fix type of update_flags variable to match its usage
|
|
Update error messages given by "git remote" and make them consistent.
* ms/remote-error-message-update:
builtin/remote: quote remote name on error to display empty name
|
|
The code to backfill objects in lazily cloned repository did not
work correctly, which has been corrected.
* jt/lazy-object-fetch-fix:
fetch-object: set exact_oid when fetching
fetch-object: unify fetch_object[s] functions
|
|
"git rebase" etc. in Git 2.19 fails to abort when given an empty
commit log message as result of editing, which has been corrected.
* en/sequencer-empty-edit-result-aborts:
sequencer: fix --allow-empty-message behavior, make it smarter
|
|
"git add ':(attr:foo)'" is not supported and is supposed to be
rejected while the command line arguments are parsed, but we fail
to reject such a command line upfront.
* nd/attr-pathspec-fix:
add: do not accept pathspec magic 'attr'
|
|
A corner case bugfix in "git rerere" code.
* en/rerere-multi-stage-1-fix:
rerere: avoid buffer overrun
t4200: demonstrate rerere segfault on specially crafted merge
|
|
Further fix for O_APPEND emulation on Windows
* js/mingw-o-append:
mingw: fix mingw_open_append to work with named pipes
t0051: test GIT_TRACE to a windows named pipe
|
|
Fix for a long-standing bug that leaves the index file corrupt when
it shrinks during a partial commit.
* jk/reopen-tempfile-truncate:
reopen_tempfile(): truncate opened file
|
|
When fsmonitor is in use, after operation on submodules updates
.gitmodules, we lost track of the fact that we did so and relied on
stale fsmonitor data.
* bp/mv-submodules-with-fsmonitor:
git-mv: allow submodules and fsmonitor to work together
|
|
"git rebase -i" did not clear the state files correctly when a run
of "squash/fixup" is aborted and then the user manually amended the
commit instead, which has been corrected.
* js/rebase-i-autosquash-fix:
rebase -i: be careful to wrap up fixup/squash chains
rebase -i --autosquash: demonstrate a problem skipping the last squash
|
|
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
|
|
A partial clone with missing trees can be obtained using "git clone
--filter=tree:none <repo>". In such a repository, when a tree needs to
be lazily fetched, any tree or blob it directly or indirectly references
is fetched as well, regardless of whether the original command required
those objects, or if the local repository already had some of them.
This is because the fetch protocol, which the lazy fetch uses, does not
allow clients to request that only the wanted objects be sent, which
would be the ideal solution. This patch implements a partial solution:
specify the "blob:none" filter, somewhat reducing the fetch payload.
This change has no effect when lazily fetching blobs (due to how filters
work). And if lazily fetching a commit (such repositories are difficult
to construct and is not a use case we support very well, but it is
possible), referenced commits and trees are still fetched - only the
blobs are not fetched.
The necessary code change is done in fetch_pack() instead of somewhere
closer to where the "filter" instruction is written to the wire so that
only one part of the code needs to be changed in order for users of all
protocol versions to benefit from this optimization.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetch_pack() is invoked as part of another Git command (due to a
lazy fetch from a partial clone, for example), it uses object flags that
may already be used by the outer Git command.
The commit that introduced the lazy fetch feature (88e2f9ed8e
("introduce fetch-object: fetch one promisor object", 2017-12-05)) tried
to avoid this overlap, but it did not avoid it totally. It was
successful in avoiding writing COMPLETE, but did not avoid reading
COMPLETE, and did not avoid writing and reading ALTERNATE.
Ensure that no flags are written or read by fetch_pack() in the case
where it is used to perform a lazy fetch. To do this, it is sufficient
to avoid checking completeness of wanted refs (unnecessary in the case
of lazy fetches), and to avoid negotiation-related work (in the current
implementation, already, no negotiation is performed). After that was
done, the lack of overlap was verified by checking all direct and
indirect usages of COMPLETE and ALTERNATE - that they are read or
written only if no_dependents is false.
There are other possible solutions to this issue:
(1) Split fetch-pack.{c,h} into a flag-using part and a non-flag-using
part, and whenever no_dependents is set, only use the
non-flag-using part.
(2) Make fetch_pack() be able to be used with arbitrary repository
objects. fetch_pack() should then create its own repository object
based on the given repository object, with its own object
hashtable, so that the flags do not conflict.
(1) is possible but invasive - some functions would need to be split;
and such invasiveness would potentially be unnecessary if we ever were
to need (2) anyway. (2) would be useful if we were to support, say,
submodules that were partial clones themselves, but I don't know when or
if the Git project plans to support those.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Invoking 'git rev-parse --show-superproject-working-tree' exits with
"fatal: BUG: returned path string doesn't match cwd?"
when the superproject has an unmerged entry for the current submodule,
instead of displaying the superproject's working tree.
The problem is due to the fact that when a merge of the submodule reference
is in progress, "git ls-files --stage —full-name <submodule-relative-path>”
returns three seperate entries for the submodule (one for each stage) rather
than a single entry; e.g.,
$ git ls-files --stage --full-name submodule-child-test
160000 dbbd2766fa330fa741ea59bb38689fcc2d283ac5 1 submodule-child-test
160000 f174d1dbfe863a59692c3bdae730a36f2a788c51 2 submodule-child-test
160000 e6178f3a58b958543952e12824aa2106d560f21d 3 submodule-child-test
The code in get_superproject_working_tree() expected exactly one entry to
be returned; this patch makes it use the first entry if multiple entries
are returned.
Test t1500-rev-parse is extended to cover this case.
Signed-off-by: Sam McKelvie <sammck@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
builtin/commit.c:prepare_to_commit() can call run_status() twice if
using the editor, including status, and the user attempts to record a
non-merge empty commit without explicit --allow-empty. If there is also
a rename involved as well (due to using 'git add -N'), then a BUG in
wt-status.c is triggered:
BUG: wt-status.c:476: multiple renames on the same target? how?
The reason we hit this bug is that both run_status() calls use the same
struct wt_status * (named s), and s->change is not freed between runs.
Changes are inserted into s with string_list_insert, which usually means
that the second run just recomputes all the same results and overwrites
what was computed the first time. However, ever since commit
176ea7479309 ("wt-status.c: handle worktree renames", 2017-12-27),
wt-status started checking for renames and copies but also added a
preventative check that d->rename_status wasn't already set and output a
BUG message if it was. The problem isn't that there are multiple rename
targets to a single path as the error implies, the problem is that 's'
is not freed/cleared between the two run_status() calls.
Ever since commit dc6b1d92ca9c ("wt-status: use settings from
git_diff_ui_config", 2018-05-04), which stopped hardcoding
DIFF_DETECT_RENAME and allowed users to ask for copy detection, this bug
has also been triggerable with a copy instead of a rename.
Fix the bug by clearing s->change. A better change might be to clean up
all of s between the two run_status() calls. A good first step towards
such a goal might be writing a function to free the necessary fields in
the wt_status * struct; a cursory glance at the code suggests all of its
allocated data is probably leaked. However, doing all that cleanup is a
bigger task for someone else interested to tackle; just fix the bug for
now.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.18:
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.17:
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As with urls, submodule paths with dashes are ignored by
git, but may end up confusing older versions. Detecting them
via fsck lets us prevent modern versions of git from being a
vector to spread broken .gitmodules to older versions.
Compared to blocking leading-dash urls, though, this
detection may be less of a good idea:
1. While such paths provide confusing and broken results,
they don't seem to actually work as option injections
against anything except "cd". In particular, the
submodule code seems to canonicalize to an absolute
path before running "git clone" (so it passes
/your/clone/-sub).
2. It's more likely that we may one day make such names
actually work correctly. Even after we revert this fsck
check, it will continue to be a hassle until hosting
servers are all updated.
On the other hand, it's not entirely clear that the behavior
in older versions is safe. And if we do want to eventually
allow this, we may end up doing so with a special syntax
anyway (e.g., writing "./-sub" in the .gitmodules file, and
teaching the submodule code to canonicalize it when
comparing).
So on balance, this is probably a good protection.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Urls with leading dashes can cause mischief on older
versions of Git. We should detect them so that they can be
rejected by receive.fsckObjects, preventing modern versions
of git from being a vector by which attacks can spread.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.16:
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.15:
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.
As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.
Moreover, naively adding such a submodule doesn't work:
$ git submodule add $url -sub
The following path is ignored by one of your .gitignore files:
-sub
even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").
Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.
There are two minor differences to the tests in t7416 (that
covered urls):
1. We don't have a "./-sub" escape hatch to make this
work, since the submodule code expects to be able to
match canonical index names to the path field (so you
are free to add submodule config with that path, but we
would never actually use it, since an index entry would
never start with "./").
2. After this patch, cloning actually succeeds. Since we
ignore the submodule.*.path value, we fail to find a
config stanza for our submodule at all, and simply
treat it as inactive. We still check for the "ignoring"
message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.
However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:
- it's meant as a file url, like "-path". But then any
clone is not going to have the matching path, since it's
by definition relative inside the newly created clone. If
you spell it as "./-path", the submodule code sees the
"/" and translates this to an absolute path, so it at
least works (assuming the receiver has the same
filesystem layout as you). But that trick does not apply
for a bare "-path".
- it's meant as an ssh url, like "-host:path". But this
already doesn't work, as we explicitly disallow ssh
hostnames that begin with a dash (to avoid option
injection against ssh).
- it's a remote-helper scheme, like "-scheme::data". This
_could_ work if the receiver bends over backwards and
creates a funny-named helper like "git-remote--scheme".
But normally there would not be any helper that matches.
Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.
Our tests cover two cases:
1. A file url with "./" continues to work, showing that
there's an escape hatch for people with truly silly
repo names.
2. A url starting with "-" is rejected.
Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we clone a submodule, we call "git clone $url $path".
But there's nothing to say that those components can't begin
with a dash themselves, confusing git-clone into thinking
they're options. Let's pass "--" to make it clear what we
expect.
There's no test here, because it's actually quite hard to
make these names work, even with "git clone" parsing them
correctly. And we're going to restrict these cases even
further in future commits. So we'll leave off testing until
then; this is just the minimal fix to prevent us from doing
something stupid with a badly formed entry.
Reported-by: joernchen <joernchen@phenoelit.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
v2.18.0-rc0~70^2 (mailmap: update brian m. carlson's email address,
2018-05-08) changed the mailmap to map
sandals@crustytoothpaste.ath.cx
-> brian m. carlson <sandals@crustytoothpaste.net>
instead of
sandals@crustytoothpaste.net
-> brian m. carlson <sandals@crustytoothpaste.ath.cx>
That means the mapping
Brian M. Carlson <sandals@crustytoothpaste.ath.cx>
-> brian m. carlson <sandals@crustytoothpaste.net>
is redundant, so we can remove it. More importantly, it means that
the identity "Brian M. Carlson <sandals@crustytoothpaste.net>" used in
some commits is not normalized any more. Add a mapping for it.
Noticed while updating Debian's Git packaging, which uses "git
shortlog --no-merges" to produce a list of changes in each version,
grouped by author's (normalized) name.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b0db704652 (pathspec: allow querying for attributes -
2017-03-13) adds new pathspec magic 'attr' but only with
match_pathspec(). "git add" has some pathspec related code that still
does not know about 'attr' and will bail out:
$ git add ':(attr:foo)'
fatal: BUG:dir.c:1584: unsupported magic 40
A better solution would be making this code support 'attr'. But I
don't know how much work is needed (I'm not familiar with this new
magic). For now, let's simply reject this magic with a friendlier
message:
$ git add ':(attr:foo)'
fatal: :(attr:foo): pathspec magic not supported by this command: 'attr'
Update t6135 so that the expected error message is from the
"graceful" rejection codepath, not "oops, we were supposed to reject
the request to trigger this magic" codepath.
Reported-by: smaudet@sebastianaudet.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When adding new remote name with empty string, git will print the
following error message,
fatal: '' is not a valid remote name\n
But when removing remote name with empty string as input, git shows the
empty string without quote,
fatal: No such remote: \n
To make these error messages consistent, quote the name of the remote
that we tried and failed to find.
Signed-off-by: Shulhan <m.shulhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the 'compute_assignment()' function may read memory out
of bounds, even if used correctly. Namely this happens when we only
have one column. In that case we try to calculate the initial
minimum cost using '!j1' as column in the reduction transfer code.
That in turn causes us to try and get the cost from column 1 in the
cost matrix, which does not exist, and thus results in an out of
bounds memory read.
In the original paper [1], the example code initializes that minimum
cost to "infinite". We could emulate something similar by setting the
minimum cost to INT_MAX, which would result in the same minimum cost
as the current algorithm, as we'd always go into the if condition at
least once, except when we only have one column, and column_count thus
equals 1.
If column_count does equal 1, the condition in the loop would always
be false, and we'd end up with a minimum of INT_MAX, which may lead to
integer overflows later in the algorithm.
For a column count of 1, we however do not even really need to go
through the whole algorithm. A column count of 1 means that there's
no possible assignments, and we can just zero out the column2row and
row2column arrays, and return early from the function, while keeping
the reduction transfer part of the function the same as it is
currently.
Another solution would be to just not call the 'compute_assignment()'
function from the range diff code in this case, however it's better to
make the compute_assignment function more robust, so future callers
don't run into this potential problem.
Note that the test only fails under valgrind on Linux, but the same
command has been reported to segfault on Mac OS.
[1]: Jonker, R., & Volgenant, A. (1987). A shortest augmenting path
algorithm for dense and sparse linear assignment
problems. Computing, 38(4), 325–340.
Reported-by: ryenus <ryenus@gmail.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fetch_objects() currently does not set exact_oid in struct ref when
invoking transport_fetch_refs(). If the server supports ref-in-want,
fetch_pack() uses this field to determine whether a wanted ref should be
requested as a "want-ref" line or a "want" line; without the setting of
exact_oid, the wrong line will be sent.
Set exact_oid, so that the correct line is sent.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are fetch_object() and fetch_objects() helpers in
fetch-object.h; as the latter takes "struct oid_array",
the former cannot be made into a thin wrapper around the
latter without an extra allocation and set-up cost.
Update fetch_objects() to take an array of "struct object_id"
and number of elements in it as separate parameters, remove
fetch_object(), and adjust all existing callers of these
functions to use the new fetch_objects().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit b00bf1c9a8dd ("git-rebase: make --allow-empty-message the
default", 2018-06-27), several arguments were given for transplanting
empty commits without halting and asking the user for confirmation on
each commit. These arguments were incomplete because the logic clearly
assumed the only cases under consideration were transplanting of commits
with empty messages (see the comment about "There are two sources for
commits with empty messages). It didn't discuss or even consider
rewords, squashes, etc. where the user is explicitly asked for a new
commit message and provides an empty one. (My bad, I totally should
have thought about that at the time, but just didn't.)
Rewords and squashes are significantly different, though, as described
by SZEDER:
Let's suppose you start an interactive rebase, choose a commit to
squash, save the instruction sheet, rebase fires up your editor, and
then you notice that you mistakenly chose the wrong commit to
squash. What do you do, how do you abort?
Before [that commit] you could clear the commit message, exit the
editor, and then rebase would say "Aborting commit due to empty
commit message.", and you get to run 'git rebase --abort', and start
over.
But [since that commit, ...] saving the commit message as is would
let rebase continue and create a bunch of unnecessary objects, and
then you would have to use the reflog to return to the pre-rebase
state.
Also, he states:
The instructions in the commit message template, which is shown for
'reword' and 'squash', too, still say...
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
These are sound arguments that when editing commit messages during a
sequencer operation, that if the commit message is empty then the
operation should halt and ask the user to correct. The arguments in
commit b00bf1c9a8dd (referenced above) still apply when transplanting
previously created commits with empty commit messages, so the sequencer
should not halt for those.
Furthermore, all rationale so far applies equally for cherry-pick as for
rebase. Therefore, make the code default to --allow-empty-message when
transplanting an existing commit, and to default to halting when the
user is asked to edit a commit message and provides an empty one -- for
both rebase and cherry-pick.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If passed both --no-deref and --stdin, update-ref would error out with a
general usage message that did not at all suggest these options were
incompatible. The manpage for update-ref did suggest through its
synopsis line that --no-deref and --stdin were incompatible, but it sadly
also incorrectly suggested that -d and --no-deref were incompatible. So
the help around the --no-deref option is buggy in a few ways.
The --stdin option did provide a different mechanism for avoiding
dereferencing symbolic-refs: adding a line reading
option no-deref
before every other directive in the input. (Technically, if the user
wants to do the extra work of first determining which refs they want to
update or delete are symbolic, then they only need to put the extra
"option no-deref" lines before the updates of those refs. But in some
cases, that's more work than just adding the "option no-deref" before
every other directive.)
It's easier to allow the user to just pass --no-deref along with --stdin
in order to tell update-ref that the user doesn't want any symbolic ref
to be dereferenced. It also makes the update-ref documentation simpler.
Implement that, and update the documentation to match.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref_transaction_*() family of functions expect a flags parameter
which is of type unsigned int. Make the update_flags variable, which
is passed as that parameter, be of the same type.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was reported that
GIT_FSMONITOR_TEST=$PWD/t7519/fsmonitor-all ./t7411-submodule-config.sh
breaks as the fsmonitor data is out of sync with the state of the .gitmodules
file. Update is_staging_gitmodules_ok() so that it no longer tells
ie_match_stat() to ignore refreshing the fsmonitor data.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a test-tool helper to create the server side of
a windows named pipe, wait for a client connection, and
copy data written to the pipe to stdout.
Create t0051 test to route GIT_TRACE output of a command
to a named pipe using the above test-tool helper.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
check_one_conflict() compares `i` to `active_nr` in two places to avoid
buffer overruns, but left out an important third location.
The code did used to have a check here comparing i to active_nr, back
before commit fb70a06da2f1 ("rerere: fix an off-by-one non-bug",
2015-06-28), however the code at the time used an 'if' rather than a
'while' meaning back then that this loop could not have read past the
end of the array, making the check unnecessary and it was removed.
Unfortunately, in commit 5eda906b2873 ("rerere: handle conflicts with
multiple stage #1 entries", 2015-07-24), the 'if' was changed to a
'while' and the check comparing i and active_nr was not re-instated,
leading to this problem.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jonathan Tan
Sam McKelvie
Elijah Newren
Jeff King
Jonathan Nieder
Nguyễn Thái Ngọc Duy
Shulhan
Thomas Gummerer
Ben Peart
Jeff Hostetler