| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git reflog expire" (and "git gc") examines the reflog entries and
discards old/stale ones using two criteria. The entries that are older
than "reflogexpire" (defaults to 90 days) are unconditionally removed, and
the entries that are older than "reflogexpireunreachable" (defaults to 30
days) are removed if the entry point at commits that are not reachable
from the value of the ref.
This is reasonable for local branches, remote tracking branches and tags.
You (or other people) may have failed experiments that have been made and
then later discarded by resetting the tip of the branch back, and setting
the value of "reflogexpireunreachable" shorter than that of "reflogexpire"
will prune the entries that describe these failed experiments earlier than
the entries that describe the steps that led to the current history.
It however doesn't make much sense for "HEAD" reflog. When you switch
between branches, it is normal that the tip of the branch you were on is
not an ancestor of the branch you have switched to. The moral equivalent
of expiring failed experiments in per-branch reflog for "HEAD" reflog is
to expire entries that talk about commits that cannot be reached from any
ref.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two more tests that sleep only to waste tick can be converted to use
test_tick and take expiry parameters relative to $test_tick. The basic
idea is to replace "sleep 1" with "test_tick" to cause the "time" to pass.
These tests are interested in expiring things with "now" as the timestamp,
soo use a timestamp relative to $test_tick to give them more stability and
reproducibility.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
3cb22b8 (Per-ref reflog expiry configuration, 2008-06-15) added support
for setting the expiry parameters differently for different reflog, but
it was never documented.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option tells the command to expire older reflog entries that refer to
commits that are no longer reachable from the tip of the ref the reflog is
associated with. To avoid repeated merge_base() invocations, we used to
mark commits that are known to be reachable by walking the history from
the tip until we hit commits that are older than expire-total (which is
the timestamp before which all the reflog entries are expired).
However, it is a different matter if a commit is _not_ known to be
reachable and the commit is known to be unreachable. Because you can
rewind a ref to an ancient commit and then reset it back to the original
tip, a recent reflog entry can point at a commit that older than the
expire-total timestamp and we shouldn't expire it. For that reason, we
had to run merge-base computation when a commit is _not_ known to be
reachable.
This introduces a lazy/on-demand traversal of the history to mark
reachable commits in steps. As before, we mark commits that are newer
than expire-total to optimize the normal case before walking reflog, but
we dig deeper from the commits the initial step left off when we encounter
a commit that is not known to be reachable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git svn gc will compress the unhandled.log files that git svn mkdirs reads,
causing git svn mkdirs to skip directory creation.
[ew: trivial whitespace cleanups]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Robert Zeh <robert.a.zeh@gmail.com>
|
|
svn+ssh:// repositories often have userinfo embedded in the URL
which were stripped out of the "git-svn-id:" trailers. Since
the SVN::Client::copy function takes userinfo into account when
matching URLs for SVN repositories, we need to retrieve the full
URL with embedded userinfo in it to avoid mismatched URLs.
Tested-by: Florian Köberle <florian@fkoeberle.de>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
* maint:
Prevent git blame from segfaulting on a missing author name
|
|
This appears to be a trivial case where array indices were being
passed to git rev-list, instead of the contents stored in the
array itself.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
The human-readable author and committer name can be missing from
commits imported from foreign SCM interfaces. Make sure we parse
the "author" and "committer" line a bit more leniently and avoid
segfaulting by assuming the name always exists.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change git-svn not to impose a limit of 16 parents on a merge.
This limit in git-svn artificially prevents cloning svn repositories
that contain commits with more than 16 merge parents.
The limit was removed from builtin-commit-tree.c for git v1.6.0 in commit
ef98c5cafb3e799b1568bb843fcd45920dc62f16, so there is no need to check for it
it in git-svn.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
The old function was incorrect; in some instances it marks a cherry picked
range as a merged branch (because of an incorrect assumption that
'rev-list COMMIT --not RANGE' would work). This is replaced with a
function which should detect them correctly, memoized to limit the expense
of dealing with branches with many cherry picks to one 'merge-base' call
per merge, per branch which used cherry picking.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
The old function would have to check all mentioned merge tips, every time
that the mergeinfo ticket changed. This involved 1-2 rev-list operation
for each listed mergeinfo line. If there are a lot of feature branches
being merged into a trunk, this makes for a very expensive operation for
detecting the new parents on every merge.
This new version first uses a single 'rev-list' to figure out which commit
ranges are already reachable from the parents. This is used to eliminate
the already merged branches from the list.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
SVN's list of commit ranges in mergeinfo tickets is inclusive, whereas
git commit ranges are exclusive on the left hand side. Also, the end
points of the commit ranges may not exist; they simply delineate
ranges of commits which may or may not exist. Fix these two mistakes.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Each time the svn mergeinfo ticket changes, we look it up in the rev_map;
when there are a lot of merged branches, this will result in many repeated
lookups of the same information for subsequent commits. Arrange the slow
part of the function so that it may be memoized, and memoize it. The more
expensive revision walking operation can be memoized separately.
[ew: changed "next" to "return" for function exit]
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
As shown, git-svn has some problems; not all svn merges are correctly
detected, and cherry picks may incorrectly be detected as real merges.
These test cases will be marked as _success once the relevant fixes are in.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
When using the -r/--revision argument to fetch deleted history,
calling SVN::Ra::get_log() from an SVN::Ra object initialized
to track the deleted URL will fail.
This regression was introduced in:
commit 4aacaeb3dc82bb6479e70e120053dc27a399460e
"fix shallow clone when upstream revision is too new"
We now ignore errors from SVN::Ra::get_log() here because using
--revision will always override the value of $head here if
(and only if) we're tracking deleted directories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Hopefully the last rc before the final one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
rebase -i: abort cleanly if the editor fails to launch
technical-docs: document hash API
api-strbuf.txt: fix typos and document launch_editor()
|
|
If the user's configured editor is emacsclient, the editor
will fail to launch if emacs is not running and the git
command that tried to lanuch the editor will abort. For most
commands, all you have to do is to start emacs and repeat
the command.
The "git rebase -i" command, however, aborts without cleaning
the "$GIT_DIR/rebase-merge" directory if it fails to launch the
editor, so you'll need to do "git rebase --abort" before
repeating the rebase command.
Change "git rebase -i" to terminate using "die_abort" (instead of
with "die") if the initial launch of the editor fails.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'svn' directly may not work for all users.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
The "git svn gc" command creates and appends to unhandled.log.gz
files which should be parsed before the uncompressed
unhandled.log files.
Reported-by: Robert Zeh
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Git 1.6.5.7
worktree: don't segfault with an absolute pathspec without a work tree
ignore unknown color configuration
help.autocorrect: do not run a command if the command given is junk
Illustrate "filter" attribute with an example
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a command is run with an absolute path as a pathspec inside a bare
repository, e.g. "rev-list HEAD -- /home", the code tried to run strlen()
on NULL, which is the result of get_git_work_tree(), and segfaulted. It
should just fail instead.
Currently the function returns NULL even inside .git/ in a repository
with a work tree, but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing the config file, if there is a value that is
syntactically correct but unused, we generally ignore it.
This lets non-core porcelains store arbitrary information in
the config file, and it means that configuration files can
be shared between new and old versions of git (the old
versions might simply ignore certain configuration).
The one exception to this is color configuration; if we
encounter a color.{diff,branch,status}.$slot variable, we
die if it is not one of the recognized slots (presumably as
a safety valve for user misconfiguration). This behavior
has existed since 801235c (diff --color: use
$GIT_DIR/config, 2006-06-24), but hasn't yet caused a
problem. No porcelain has wanted to store extra colors, and
we once a color area (like color.diff) has been introduced,
we've never changed the set of color slots.
However, that changed recently with the addition of
color.diff.func. Now a user with color.diff.func in their
config can no longer freely switch between v1.6.6 and older
versions; the old versions will complain about the existence
of the variable.
This patch loosens the check to match the rest of
git-config; unknown color slots are simply ignored. This
doesn't fix this particular problem, as the older version
(without this patch) is the problem, but it at least
prevents it from happening again in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a given command is not found, then help.c tries to guess which one the
user could have meant. If help.autocorrect is 0 or unset, then a list of
suggestions is given as long as the dissimilarity between the given command
and the candidates is not excessively high. But if help.autocorrect was
non-zero (i.e., a delay after which the command is run automatically), the
latter restriction on dissimilarity was not obeyed.
In my case, this happened:
$ git ..daab02
WARNING: You called a Git command named '..daab02', which does not exist.
Continuing under the assumption that you meant 'read-tree'
in 4.0 seconds automatically...
The patch reuses the similarity limit that is also applied when the list of
suggested commands is printed.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The example was taken from aa4ed402c9721170fde2e9e43c3825562070e65e
(Add 'filter' attribute and external filter driver definition).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support the new options --all, --prune, and --dry-run for
'git fetch'.
As the --multiple option was primarily introduced to enable
'git remote update' to be re-implemented in terms of 'git fetch'
(16679e37) and is not likely to be used much from the command
line, it does not seems worthwhile to complicate the code
(to support completion of multiple remotes) to handle it.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These three have already been backported to 1.6.5.5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Giving --format from the command line, or using output file extention to
DWIM the output format, with a pathspec that is disambiguated with an
explicit double-dash on the command line, e.g.
git archive -o file --format=zip HEAD -- path
git archive -o file.zip HEAD -- path
didn't work correctly.
This was because the code reordered (when one was given) or added (when
the format was inferred) a --format argument at the end, effectively
making it to "archive HEAD -- path --format=zip", i.e. an extra pathspec
that is unlikely to match anything.
The command line argument list should always be "options, revs and then
paths", and we should set a good example by inserting the --format at the
beginning instead.
Reported-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This hook runs after "git fetch" in the repository the objects are
fetched from as the user who fetched, and has security implications.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://repo.or.cz/git-gui:
git-gui: suppress RenderBadPicture X error caused by Tk bug
git-gui: Increase blame viewer usability on MacOS.
git-gui: search 4 directories to improve statistic of gc hint
git gui: make current branch default in "remote delete branch" merge check
|
|
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix selection of tags
gitk: Default to the system colours on Windows
gitk: Update Japanese translation
gitk: Fix "git gui blame" invocation when called from top-level directory
gitk: Disable checkout of remote branches
gitk: Improve appearance of radiobuttons and checkbuttons
gitk: Skip translation of "wrong Tcl version" message
gitk: Add Japanese translation
gitk: Use the --submodule option for displaying diffs when available
gitk: Fix diffing committed -> staged (typo in diffcmd)
gitk: Add configuration for UI colour scheme
gitk: Don't compare fake children when comparing commits
gitk: Show diff of commits at end of compare-commits output
gitk: Add a user preference to enable/disable use of themed widgets
gitk: Fix errors in the theme patch
gitk: Use themed tk widgets
gitk: Restore scrolling position of diff pane on back/forward in history
|
|
Reword the 1.7.0 warnings, and drop deprecation of "merge <msg> HEAD <commit>..."
syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
add-interactive: fix deletion of non-empty files
pull: clarify advice for the unconfigured error case
|
|
* mm/maint-merge-ff-error-message-fix:
builtin-merge: show user-friendly error messages for fast-forward too.
merge-recursive: make the error-message generation an extern function
Conflicts:
merge-recursive.c
|
|
* jn/maint-pull-rebase-error-message:
pull: clarify advice for the unconfigured error case
|
|
* jk/maint-add-p-delete-fix:
add-interactive: fix deletion of non-empty files
|
|
* git://git.bogomips.org/git-svn:
git-svn: set svn.authorsfile earlier when cloning
git-svn: Set svn.authorsfile to an absolute path when cloning
|
|
If a clone errors out because of a missing author, or user interrupt,
this allows `git svn fetch` to resume seamlessly, rather than forcing
the user to re-provide the path to the authors file.
[ew: shortened subject]
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
If --authors-file is passed a relative path, cloning will work, but
future `git svn fetch`es will fail to locate the authors file
correctly. Thus, use File::Spec->rel2abs to determine an absolute
path for the authors file before setting it.
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
This reverts commit c0ecb07048ce2123589a2f077d296e8cf29a9570 "git-pull.sh:
Fix call to git-merge for new command format" and
commit b81e00a965c62ca72a4b9db425ee173de147808d "git-merge: a deprecation
notice of the ancient command line syntax".
They caused a "git pull" (without any arguments, and without any local
commits---only to update to the other side) to warn that commit log
message is ignored because the merge resulted in a fast-forward.
Another possible solution is to add an extra option to "git merge" so that
"git pull" can tell it that the message given is not coming from the end
user (the canned message is passed just in case the merge resulted in a
non-ff and caused commit), but I think it is easier _not_ to deprecate the
old syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Robert Zeh
Eric Wong
David Reiss
Andrew Myrick
Sam Vilain
Björn Gustavsson
Stephen Boyd
Jeff King
Johannes Sixt
Nanako Shiraishi
Alex Vandiver