| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Our CMake configuration generates not only build definitions, but also
install definitions: After building Git using `msbuild git.sln`, the
built artifacts can be installed via `msbuild INSTALL.vcxproj`.
To specify _where_ the files should be installed, the
`-DCMAKE_INSTALL_PREFIX=<path>` option can be used when running CMake.
However, this process would really only install the files that were just
built. On Windows, we need more than that: We also need the `.dll` files
of the dependencies (such as libcurl). The `vcpkg` ecosystem, which we
use to obtain those dependencies, can be asked to install said `.dll`
files really easily, so let's do that.
This requires more than just the built `vcpkg` artifacts in the CI build
definition; We now clone the `vcpkg` repository so that the relevant
CMake scripts are available, in particular the ones related to defining
the toolchain.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The version of Ubuntu Linux used by default at GitHub Actions CI
has been updated to one that lack coccinelle; until it gets fixed,
work it around by sticking to the previous release (18.04).
* tb/ci-run-cocci-with-18.04:
.github/workflows/main.yml: run static-analysis on bionic
|
|
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
|
|
GitHub Actions is transitioning workflow steps that run on
'ubuntu-latest' from 18.04 to 20.04 [1].
This works fine in all steps except the static-analysis one, since
Coccinelle isn't available on Ubuntu focal (it is only available in the
universe suite).
Until Coccinelle can be installed from 20.04's main suite, pin the
static-analysis build to run on 18.04, where it can be installed by
default.
[1]: https://github.com/actions/virtual-environments/issues/1816
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The CI/PR GitHub Actions workflow uses the 'matrix' strategy for the
"windows-test", "vs-test", "regular" and "dockerized" jobs. The default
behaviour of GitHub Actions is to cancel all in-progress jobs in a
matrix if one of the job of the matrix fails [1].
This is not ideal as a failure early in a job, like during installation of
the build/test dependencies on a specific platform, leads to the
cancellation of all other jobs in the matrix.
Set the 'fail-fast' variable to 'false' for all four matrix jobs in the
workflow.
[1] https://docs.github.com/en/actions/reference/workflow-syntax-for-github-actions#jobsjob_idstrategyfail-fast
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A subsequent commit will remove GETTEXT_POISON entirely, let's start
by removing the CI jobs that enable the option.
We cannot just remove the job because the CI is implicitly depending
on the "poison" job being a sort of "default" job in the sense that
it's the job that was otherwise run with the default compiler, no
other GIT_TEST_* options etc. So let's keep it under the name
"linux-gcc-default".
This means we can remove the initial "make test" from the "linux-gcc"
job (it does another one after setting a bunch of GIT_TEST_*
variables).
I'm not doing that because it would conflict with the in-flight
334afbc76fb (tests: mark tests relying on the current default for
`init.defaultBranch`, 2020-11-18) (currently on the "seen" branch, so
the SHA-1 will almost definitely change). It's going to use that "make
test" again for different reasons, so let's preserve it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build update.
* da/vs-build-iconv-fix:
ci(vs-build): stop passing the iconv library location explicitly
|
|
Something changed in `vcpkg` (which we use in our Visual C++ build to
provide the dependencies such as libcurl) and our `vs-build` job started
failing in CI. The reason is that we had a work-around in place to help
CMake find iconv, and this work-around is neither needed nor does it
work anymore.
For the full discussion with the vcpkg project, see this comment:
https://github.com/microsoft/vcpkg/issues/14780#issuecomment-735368280
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CI update.
* js/ci-github-set-env:
ci: avoid using the deprecated `set-env` construct
|
|
Dev support update.
* cw/ci-ghwf-check-ws-errors:
ci: make the whitespace checker more robust
|
|
The `set-env` construct was deprecated as of the announcement in
https://github.blog/changelog/2020-10-01-github-actions-deprecating-set-env-and-add-path-commands/
Let's use the recommended alternative instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 32c83afc2c69 (ci: github action - add check for whitespace errors,
2020-09-22), we introduced a GitHub workflow that automatically checks
Pull Requests for whitespace problems.
However, when affected lines contain one or more double quote
characters, this workflow failed to attach the informative comment
because the Javascript snippet incorrectly interpreted these quotes
instead of using the `git log` output as-is.
Let's fix that.
While at it, let's `await` the result of the `createComment()` function.
Finally, we enclose the log in the comment with ```...``` to avoid
having the diff marker be misinterpreted as an enumeration bullet.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
GitHub Actions automated test improvement to skip tests on a tree
identical to what has already been tested.
* js/ci-ghwf-dedup-tests:
ci: make the "skip-if-redundant" check more defensive
ci: work around old records of GitHub runs
|
|
In 7d78d5fc1a9 (ci: skip GitHub workflow runs for already-tested
commits/trees, 2020-10-08), we added a check that determines whether
there is already a workflow run for the given commit (or at least tree),
and if found, skips the current run.
We just worked around an issue with this check where older runs might
unexpectedly miss the `head_commit` attribute.
Let's be even more defensive by catching all kinds of exceptions,
logging them as warnings, and continue the run without skipping it
(after all, if the check fails, we _want_ to continue with the run).
This commit is best viewed with the diff option `-w` because it
increases the indentation level of the GitHub Action script by two
spaces, surrounding it by a `try ... catch` construct.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apparently older GitHub runs at least _sometimes_ lack information about
the `head_commit` (and therefore the `ci-config` check will fail with
"TypeError: Cannot read property 'tree_id' of null") in the check added
in 7d78d5fc1a9 (ci: skip GitHub workflow runs for already-tested
commits/trees, 2020-10-08).
Let's work around this by adding a defensive condition.
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Not all developers are aware of `git diff --check` to warn
about whitespace issues. Running a check when a pull request is
opened or updated can save time for reviewers and the submitter.
A GitHub workflow will run when a pull request is created or the
contents are updated to check the patch series. A pull request
provides the necessary information (number of commits) to only
check the patch series.
To ensure the developer is aware of any issues, a comment will be
added to the pull request with the check errors.
Signed-off-by: Chris. Webster <chris@webstech.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic to skip testing on the tagged commit and the tag itself
was not quite consistent which led to failure of Windows test
tasks. It has been revamped to consistently skip revisions that
have already been tested, based on the tree object of the revision.
* js/ci-ghwf-dedup-tests:
ci: do not skip tagged revisions in GitHub workflows
ci: skip GitHub workflow runs for already-tested commits/trees
|
|
When pushing a commit that has already passed a CI or PR build
successfully, it makes sense to save some energy and time and skip the
new build.
Let's teach our GitHub workflow to do that.
For good measure, we also compare the tree ID, which is what we actually
test (the commit ID might have changed due to a reworded commit message,
which should not affect the outcome of the run).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is the custom to follow minor updates of GitHub Actions
automatically, by using the suffix `@v1`. Actions' maintainers will then
update that `v1` ref to point to the newest.
However, for `microsoft/setup-msbuild`, 889cacb6897 (ci: configure
GitHub Actions for CI/PR, 2020-04-11) uses a very specific `@v1.0.0`
suffix.
In this instance, that is a problem: should `setup-msbuild` release a
new version that intends to fix a critical bug, we won't know it, and we
won't use it.
Such a scenario is not theoretical. It is happening right now:
https://github.blog/changelog/2020-10-01-github-actions-deprecating-set-env-and-add-path-commands
Let's simplify our setup, allowing us to benefit from automatically
using the newest v1.x.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the common case where users have _not_ pushed a `ci-config` branch to
configure which branches should be included in the GitHub workflow runs,
there is a big fat ugly annotation about a failure in the run's log:
X Check failure on line 1 in .github
@github-actions github-actions / ci-config
.github#L1
Process completed with exit code 128.
The reason is that the `ci-config` job tries to clone that `ci-config`
branch, and even if it is configured to continue on error, the
annotation is displayed, and it is distracting.
Let's just handle this on the shell script level, so that the job's step
is not marked as a failure.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The section added in e76eec35540f (ci: allow per-branch config for
GitHub Actions, 2020-05-07) contains a `&&`-chain that connects several
commands. The first command is actually so long that it stretches over
multiple lines, and as per usual, the continuation lines are indented one
more level than the first.
However, the subsequent commands in the `&&`-chain were also indented
one more level than the first command, which was almost certainly
unintended.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Aesthetic fix to a CI configuration file.
* am/ci-wsfix:
ci: fix inconsistent indentation
|
|
While YAML allows different indentation styles as long as each block
is consistent, it is rather unusual to mix different indentations in
a single file. Adjust to use two-space indentation everywhere.
Signed-off-by: Adrian Moennich <adrian@planetcoding.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CMake support to build with MSVC for Windows bypassing the Makefile.
* ss/cmake-build:
ci: modification of main.yml to use cmake for vs-build job
cmake: support for building git on windows with msvc and clang.
cmake: support for building git on windows with mingw
cmake: support for testing git when building out of the source tree
cmake: support for testing git with ctest
cmake: installation support for git
cmake: generate the shell/perl/python scripts and templates, translations
Introduce CMake support for configuring Git
|
|
Teach .github/workflows/main.yml to use CMake for VS builds.
Modified the vs-test step to match windows-test step. This speeds
up the vs-test. Calling git-cmd from powershell and then calling git-bash
to perform the tests slows things down(factor of about 6). So git-bash
is directly called from powershell to perform the tests using prove.
NOTE: Since GitHub keeps the same directory for each job
(with respect to path) absolute paths are used in the bin-wrapper
scripts.
GitHub has switched to CMake 3.17.1 which changed the behaviour of
FindCURL module. An extra definition (-DCURL_NO_CURL_CMAKE=ON) has been
added to revert to the old behaviour.
In the configuration phase CMake looks for the required libraries for
building git (eg zlib,libiconv). So we extract the libraries before we
configure.
To check for ICONV_OMITS_BOM libiconv.dll needs to be in the working
directory of script or path. So we copy the dlls before we configure.
Signed-off-by: Sibi Siddharthan <sibisiddharthan.github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc updates.
* es/advertise-contribution-doc:
docs: mention MyFirstContribution in more places
|
|
While the MyFirstContribution guide exists and has received some use and
positive reviews, it is still not as discoverable as it could be. Add a
reference to it from the GitHub pull request template, where many
brand-new contributors may look. Also add a reference to it in
SubmittingPatches, which is the central source of guidance for patch
contribution.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of downloading Windows SDK for CI jobs for windows builds
from an external site (wingit.blob.core.windows.net), use the one
created in the windows-build job, to work around quota issues at
the external site.
* js/ci-sdk-download-fix:
ci: avoid pounding on the poor ci-artifacts container
|
|
When this developer tested how the git-sdk-64-minimal artifact could be
served to all the GitHub workflow runs that need it, Azure Blobs looked
like a pretty good choice: it is reliable, fast and we already use it in
Git for Windows to serve components like OpenSSL, cURL, etc
It came as an unpleasant surprise just _how many_ times this artifact
was downloaded. It exploded the bandwidth to a point where the free tier
would no longer be enough, threatening to block other, essential Git for
Windows services.
Let's switch back to using the Build Artifacts of our trusty Azure
Pipeline for the time being.
To avoid unnecessary hammering of the Azure Pipeline artifacts, we use
the GitHub Action `actions/upload-artifact` in the `windows-build` job
and the GitHub Action `actions/download-artifact` in the `windows-test`
and `vs-test` jobs (the latter now depends on `windows-build` for that
reason, too).
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on the workflows of individual developers, it can either be
convenient or annoying that our GitHub Actions CI jobs are run on every
branch. As an example of annoying: if you carry many half-finished
work-in-progress branches and rebase them frequently against master,
you'd get tons of failure reports that aren't interesting (not to
mention the wasted CPU).
This commit adds a new job which checks a special branch within the
repository for CI config, and then runs a shell script it finds there to
decide whether to skip the rest of the tests. The default will continue
to run tests for all refs if that branch or script is missing.
There have been a few alternatives discussed:
One option is to carry information in the commit itself about whether it
should be tested, either in the tree itself (changing the workflow YAML
file) or in the commit message (a "[skip ci]" flag or similar). But
these are frustrating and error-prone to use:
- you have to manually apply them to each branch that you want to mark
- it's easy for them to leak into other workflows, like emailing patches
We could likewise try to get some information from the branch name. But
that leads to debates about whether the default should be "off" or "on",
and overriding still ends up somewhat awkward. If we default to "on",
you have to remember to name your branches appropriately to skip CI. And
if "off", you end up having to contort your branch names or duplicate
your pushes with an extra refspec.
By comparison, this commit's solution lets you specify your config once
and forget about it, and all of the data is off in its own ref, where it
can be changed by individual forks without touching the main tree.
There were a few design decisions that came out of on-list discussion.
I'll summarize here:
- we could use GitHub's API to retrieve the config ref, rather than a
real checkout (and then just operate on it via some javascript). We
still have to spin up a VM and contact GitHub over the network from
it either way, so it ends up not being much faster. I opted to go
with shell to keep things similar to our other tools (and really
could implement allow-refs in any language you want). This also makes
it easy to test your script locally, and to modify it within the
context of a normal git.git tree.
- we could keep the well-known refname out of refs/heads/ to avoid
cluttering the branch namespace. But that makes it awkward to
manipulate. By contrast, you can just "git checkout ci-config" to
make changes.
- we could assume the ci-config ref has nothing in it except config
(i.e., a branch unrelated to the rest of git.git). But dealing with
orphan branches is awkward. Instead, we'll do our best to efficiently
check out only the ci/config directory using a shallow partial clone,
which allows your ci-config branch to be just a normal branch, with
your config changes on top.
- we could provide a simpler interface, like a static list of ref
patterns. But we can't get out of spinning up a whole VM anyway, so
we might as well use that feature to make the config as flexible as
possible. If we add more config, we should be able to reuse our
partial-clone to set more outputs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Arguably, CI builds' most important task is to not only identify
regressions, but to make it as easy as possible to investigate what went
wrong.
In that light, we will want to provide users with a way to inspect the
tests' output as well as the corresponding directories.
This commit adds build steps that are only executed when tests failed,
uploading the relevant information as build artifacts. These artifacts
can then be downloaded by interested parties to diagnose the failures
more efficiently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch adds CI builds via GitHub Actions. While the underlying
technology is at least _very_ similar to that of Azure Pipelines, GitHub
Actions are much easier to set up than Azure Pipelines:
- no need to install a GitHub App,
- no need to set up an Azure DevOps account,
- all you need to do is push to your fork on GitHub.
Therefore, it makes a lot of sense for us to have a working GitHub
Actions setup.
While copy/editing `azure-pipelines.yml` into
`.github/workflows/main.yml`, we also use the opportunity to accelerate
the step that sets up a minimal subset of Git for Windows' SDK in the
Windows-build job:
- we now download a `.tar.xz` stored in Azure Blobs and extract it
simultaneously by calling `curl` and piping the result to `tar`,
- decompressing via `xz`,
- all three utilities are installed together with Git for Windows
At the same time, we also make use of the matrix build feature, which
reduces the amount of repeated text by quite a bit.
Also, we do away with the parts that try to mount a file share on which
`prove` can store data between runs. It is just too complicated to set
up, and most times the tree changes anyway, so there is little return on
investment there.
Initial-patch-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the contributing guide and PR template seen by people who open pull
requests on GitHub, we mention the submitGit tool, which gives an
alternative to figuring out the mailing list. These days we also have
the similar GitGitGadget tool, and we should make it clear that this
is also an option.
We could continue to mention _both_ tools, but it's probably better to
pick one in order to avoid overwhelming the user with choice. After all,
one of the purposes here is to reduce friction for first-time or
infrequent contributors. And there are a few reasons to prefer GGG:
1. submitGit seems to still have a few rough edges. E.g., it doesn't
munge timestamps to help threaded mail readers handled out-of-order
delivery.
2. Subjectively, GGG seems to be more commonly used on the list these
days, especially by list regulars.
3. GGG seems to be under more active development (likely related to
point 2).
So let's actually swap out submitGit for GGG. While we're there, let's
put another link to the GGG page in the PR template, because that's
where users who are learning about it for the first time will want to go
to read more.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many open source projects use github.com for their contribution process.
Although we mirror the Git core repository to github.com [1] we do not
use any other github.com service. This is unknown/unexpected to a
number of (potential) contributors and consequently they create Pull
Requests against our mirror with their contributions. These Pull
Requests become stale. This is frustrating to them as they think we
ignore them and it is also unsatisfactory for us as we miss potential
code improvements and/or new contributors.
GitHub contribution guidelines and a GitHub Pull Request template that
is visible to every Pull Request creator can be configured with special
files in a Git repository [2]. Let's make use of this!
[1] https://github.com/git/git
[2] https://help.github.com/articles/creating-a-pull-request-template-for-your-repository/
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Dennis Ameling
Junio C Hamano
Taylor Blau
Philippe Blain
Ævar Arnfjörð Bjarmason
Johannes Schindelin
Chris. Webster
Adrian Moennich
Sibi Siddharthan
Emily Shaffer
Jeff King
Đoàn Trần Công Danh
Lars Schneider