1 files changed, 313 insertions, 2 deletions

diff --git a/transport-helper.c b/transport-helper.c
index acfc88e3f1..8866adf088 100644
--- a/transport-helper.c
+++ b/transport-helper.c
@@ -8,11 +8,11 @@
 #include "quote.h"
 #include "remote.h"
 #include "string-list.h"
+#include "thread-utils.h"
 
 static int debug;
 
-struct helper_data
-{
+struct helper_data {
 	const char *name;
 	struct child_process *helper;
 	FILE *out;
@@ -862,3 +862,314 @@ int transport_helper_init(struct transport *transport, const char *name)
 	transport->smart_options = &(data->transport_options);
 	return 0;
 }
+
+/*
+ * Linux pipes can buffer 65536 bytes at once (and most platforms can
+ * buffer less), so attempt reads and writes with up to that size.
+ */
+#define BUFFERSIZE 65536
+/* This should be enough to hold debugging message. */
+#define PBUFFERSIZE 8192
+
+/* Print bidirectional transfer loop debug message. */
+static void transfer_debug(const char *fmt, ...)
+{
+	va_list args;
+	char msgbuf[PBUFFERSIZE];
+	static int debug_enabled = -1;
+
+	if (debug_enabled < 0)
+		debug_enabled = getenv("GIT_TRANSLOOP_DEBUG") ? 1 : 0;
+	if (!debug_enabled)
+		return;
+
+	va_start(args, fmt);
+	vsnprintf(msgbuf, PBUFFERSIZE, fmt, args);
+	va_end(args);
+	fprintf(stderr, "Transfer loop debugging: %s\n", msgbuf);
+}
+
+/* Stream state: More data may be coming in this direction. */
+#define SSTATE_TRANSFERING 0
+/*
+ * Stream state: No more data coming in this direction, flushing rest of
+ * data.
+ */
+#define SSTATE_FLUSHING 1
+/* Stream state: Transfer in this direction finished. */
+#define SSTATE_FINISHED 2
+
+#define STATE_NEEDS_READING(state) ((state) <= SSTATE_TRANSFERING)
+#define STATE_NEEDS_WRITING(state) ((state) <= SSTATE_FLUSHING)
+#define STATE_NEEDS_CLOSING(state) ((state) == SSTATE_FLUSHING)
+
+/* Unidirectional transfer. */
+struct unidirectional_transfer {
+	/* Source */
+	int src;
+	/* Destination */
+	int dest;
+	/* Is source socket? */
+	int src_is_sock;
+	/* Is destination socket? */
+	int dest_is_sock;
+	/* Transfer state (TRANSFERING/FLUSHING/FINISHED) */
+	int state;
+	/* Buffer. */
+	char buf[BUFFERSIZE];
+	/* Buffer used. */
+	size_t bufuse;
+	/* Name of source. */
+	const char *src_name;
+	/* Name of destination. */
+	const char *dest_name;
+};
+
+/* Closes the target (for writing) if transfer has finished. */
+static void udt_close_if_finished(struct unidirectional_transfer *t)
+{
+	if (STATE_NEEDS_CLOSING(t->state) && !t->bufuse) {
+		t->state = SSTATE_FINISHED;
+		if (t->dest_is_sock)
+			shutdown(t->dest, SHUT_WR);
+		else
+			close(t->dest);
+		transfer_debug("Closed %s.", t->dest_name);
+	}
+}
+
+/*
+ * Tries to read read data from source into buffer. If buffer is full,
+ * no data is read. Returns 0 on success, -1 on error.
+ */
+static int udt_do_read(struct unidirectional_transfer *t)
+{
+	ssize_t bytes;
+
+	if (t->bufuse == BUFFERSIZE)
+		return 0;	/* No space for more. */
+
+	transfer_debug("%s is readable", t->src_name);
+	bytes = read(t->src, t->buf + t->bufuse, BUFFERSIZE - t->bufuse);
+	if (bytes < 0 && errno != EWOULDBLOCK && errno != EAGAIN &&
+		errno != EINTR) {
+		error("read(%s) failed: %s", t->src_name, strerror(errno));
+		return -1;
+	} else if (bytes == 0) {
+		transfer_debug("%s EOF (with %i bytes in buffer)",
+			t->src_name, t->bufuse);
+		t->state = SSTATE_FLUSHING;
+	} else if (bytes > 0) {
+		t->bufuse += bytes;
+		transfer_debug("Read %i bytes from %s (buffer now at %i)",
+			(int)bytes, t->src_name, (int)t->bufuse);
+	}
+	return 0;
+}
+
+/* Tries to write data from buffer into destination. If buffer is empty,
+ * no data is written. Returns 0 on success, -1 on error.
+ */
+static int udt_do_write(struct unidirectional_transfer *t)
+{
+	size_t bytes;
+
+	if (t->bufuse == 0)
+		return 0;	/* Nothing to write. */
+
+	transfer_debug("%s is writable", t->dest_name);
+	bytes = write(t->dest, t->buf, t->bufuse);
+	if (bytes < 0 && errno != EWOULDBLOCK && errno != EAGAIN &&
+		errno != EINTR) {
+		error("write(%s) failed: %s", t->dest_name, strerror(errno));
+		return -1;
+	} else if (bytes > 0) {
+		t->bufuse -= bytes;
+		if (t->bufuse)
+			memmove(t->buf, t->buf + bytes, t->bufuse);
+		transfer_debug("Wrote %i bytes to %s (buffer now at %i)",
+			(int)bytes, t->dest_name, (int)t->bufuse);
+	}
+	return 0;
+}
+
+
+/* State of bidirectional transfer loop. */
+struct bidirectional_transfer_state {
+	/* Direction from program to git. */
+	struct unidirectional_transfer ptg;
+	/* Direction from git to program. */
+	struct unidirectional_transfer gtp;
+};
+
+static void *udt_copy_task_routine(void *udt)
+{
+	struct unidirectional_transfer *t = (struct unidirectional_transfer *)udt;
+	while (t->state != SSTATE_FINISHED) {
+		if (STATE_NEEDS_READING(t->state))
+			if (udt_do_read(t))
+				return NULL;
+		if (STATE_NEEDS_WRITING(t->state))
+			if (udt_do_write(t))
+				return NULL;
+		if (STATE_NEEDS_CLOSING(t->state))
+			udt_close_if_finished(t);
+	}
+	return udt;	/* Just some non-NULL value. */
+}
+
+#ifndef NO_PTHREADS
+
+/*
+ * Join thread, with apporiate errors on failure. Name is name for the
+ * thread (for error messages). Returns 0 on success, 1 on failure.
+ */
+static int tloop_join(pthread_t thread, const char *name)
+{
+	int err;
+	void *tret;
+	err = pthread_join(thread, &tret);
+	if (!tret) {
+		error("%s thread failed", name);
+		return 1;
+	}
+	if (err) {
+		error("%s thread failed to join: %s", name, strerror(err));
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * Spawn the transfer tasks and then wait for them. Returns 0 on success,
+ * -1 on failure.
+ */
+static int tloop_spawnwait_tasks(struct bidirectional_transfer_state *s)
+{
+	pthread_t gtp_thread;
+	pthread_t ptg_thread;
+	int err;
+	int ret = 0;
+	err = pthread_create(&gtp_thread, NULL, udt_copy_task_routine,
+		&s->gtp);
+	if (err)
+		die("Can't start thread for copying data: %s", strerror(err));
+	err = pthread_create(&ptg_thread, NULL, udt_copy_task_routine,
+		&s->ptg);
+	if (err)
+		die("Can't start thread for copying data: %s", strerror(err));
+
+	ret |= tloop_join(gtp_thread, "Git to program copy");
+	ret |= tloop_join(ptg_thread, "Program to git copy");
+	return ret;
+}
+#else
+
+/* Close the source and target (for writing) for transfer. */
+static void udt_kill_transfer(struct unidirectional_transfer *t)
+{
+	t->state = SSTATE_FINISHED;
+	/*
+	 * Socket read end left open isn't a disaster if nobody
+	 * attempts to read from it (mingw compat headers do not
+	 * have SHUT_RD)...
+	 *
+	 * We can't fully close the socket since otherwise gtp
+	 * task would first close the socket it sends data to
+	 * while closing the ptg file descriptors.
+	 */
+	if (!t->src_is_sock)
+		close(t->src);
+	if (t->dest_is_sock)
+		shutdown(t->dest, SHUT_WR);
+	else
+		close(t->dest);
+}
+
+/*
+ * Join process, with apporiate errors on failure. Name is name for the
+ * process (for error messages). Returns 0 on success, 1 on failure.
+ */
+static int tloop_join(pid_t pid, const char *name)
+{
+	int tret;
+	if (waitpid(pid, &tret, 0) < 0) {
+		error("%s process failed to wait: %s", name, strerror(errno));
+		return 1;
+	}
+	if (!WIFEXITED(tret) || WEXITSTATUS(tret)) {
+		error("%s process failed", name);
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * Spawn the transfer tasks and then wait for them. Returns 0 on success,
+ * -1 on failure.
+ */
+static int tloop_spawnwait_tasks(struct bidirectional_transfer_state *s)
+{
+	pid_t pid1, pid2;
+	int ret = 0;
+
+	/* Fork thread #1: git to program. */
+	pid1 = fork();
+	if (pid1 < 0)
+		die_errno("Can't start thread for copying data");
+	else if (pid1 == 0) {
+		udt_kill_transfer(&s->ptg);
+		exit(udt_copy_task_routine(&s->gtp) ? 0 : 1);
+	}
+
+	/* Fork thread #2: program to git. */
+	pid2 = fork();
+	if (pid2 < 0)
+		die_errno("Can't start thread for copying data");
+	else if (pid2 == 0) {
+		udt_kill_transfer(&s->gtp);
+		exit(udt_copy_task_routine(&s->ptg) ? 0 : 1);
+	}
+
+	/*
+	 * Close both streams in parent as to not interfere with
+	 * end of file detection and wait for both tasks to finish.
+	 */
+	udt_kill_transfer(&s->gtp);
+	udt_kill_transfer(&s->ptg);
+	ret |= tloop_join(pid1, "Git to program copy");
+	ret |= tloop_join(pid2, "Program to git copy");
+	return ret;
+}
+#endif
+
+/*
+ * Copies data from stdin to output and from input to stdout simultaneously.
+ * Additionally filtering through given filter. If filter is NULL, uses
+ * identity filter.
+ */
+int bidirectional_transfer_loop(int input, int output)
+{
+	struct bidirectional_transfer_state state;
+
+	/* Fill the state fields. */
+	state.ptg.src = input;
+	state.ptg.dest = 1;
+	state.ptg.src_is_sock = (input == output);
+	state.ptg.dest_is_sock = 0;
+	state.ptg.state = SSTATE_TRANSFERING;
+	state.ptg.bufuse = 0;
+	state.ptg.src_name = "remote input";
+	state.ptg.dest_name = "stdout";
+
+	state.gtp.src = 0;
+	state.gtp.dest = output;
+	state.gtp.src_is_sock = 0;
+	state.gtp.dest_is_sock = (input == output);
+	state.gtp.state = SSTATE_TRANSFERING;
+	state.gtp.bufuse = 0;
+	state.gtp.src_name = "stdin";
+	state.gtp.dest_name = "remote output";
+
+	return tloop_spawnwait_tasks(&state);
+}