diff options
Diffstat (limited to 'templates')
| -rw-r--r-- | templates/.gitignore | 2 | ||||
| -rw-r--r-- | templates/Makefile | 53 | ||||
| -rw-r--r-- | templates/branches-- | 1 | ||||
| -rwxr-xr-x | templates/hooks--applypatch-msg.sample | 15 | ||||
| -rwxr-xr-x | templates/hooks--commit-msg.sample | 24 | ||||
| -rwxr-xr-x | templates/hooks--post-commit.sample | 8 | ||||
| -rwxr-xr-x | templates/hooks--post-receive.sample | 15 | ||||
| -rwxr-xr-x | templates/hooks--post-update.sample | 8 | ||||
| -rwxr-xr-x | templates/hooks--pre-applypatch.sample | 14 | ||||
| -rwxr-xr-x | templates/hooks--pre-commit.sample | 46 | ||||
| -rwxr-xr-x | templates/hooks--pre-rebase.sample | 169 | ||||
| -rwxr-xr-x | templates/hooks--prepare-commit-msg.sample | 36 | ||||
| -rwxr-xr-x | templates/hooks--update.sample | 128 | ||||
| -rw-r--r-- | templates/info--exclude | 6 | ||||
| -rw-r--r-- | templates/this--description | 1 |
15 files changed, 526 insertions, 0 deletions
diff --git a/templates/.gitignore b/templates/.gitignore new file mode 100644 index 0000000000..6759ecbf98 --- /dev/null +++ b/templates/.gitignore @@ -0,0 +1,2 @@ +blt +boilerplates.made diff --git a/templates/Makefile b/templates/Makefile new file mode 100644 index 0000000000..408f0137a8 --- /dev/null +++ b/templates/Makefile @@ -0,0 +1,53 @@ +# make and install sample templates + +ifndef V + QUIET = @ +endif + +INSTALL ?= install +TAR ?= tar +RM ?= rm -f +prefix ?= $(HOME) +template_instdir ?= $(prefix)/share/git-core/templates +# DESTDIR= + +# Shell quote (do not use $(call) to accommodate ancient setups); +DESTDIR_SQ = $(subst ','\'',$(DESTDIR)) +template_instdir_SQ = $(subst ','\'',$(template_instdir)) + +all: boilerplates.made custom + +# Put templates that can be copied straight from the source +# in a file direc--tory--file in the source. They will be +# just copied to the destination. + +bpsrc = $(filter-out %~,$(wildcard *--*)) +boilerplates.made : $(bpsrc) + $(QUIET)umask 022 && ls *--* 2>/dev/null | \ + while read boilerplate; \ + do \ + case "$$boilerplate" in *~) continue ;; esac && \ + dst=`echo "$$boilerplate" | sed -e 's|^this|.|;s|--|/|g'` && \ + dir=`expr "$$dst" : '\(.*\)/'` && \ + mkdir -p blt/$$dir && \ + case "$$boilerplate" in \ + *--) continue;; \ + esac && \ + cp $$boilerplate blt/$$dst && \ + if test -x "blt/$$dst"; then rx=rx; else rx=r; fi && \ + chmod a+$$rx "blt/$$dst" || exit; \ + done && \ + date >$@ + +# If you need build-tailored templates, build them into blt/ +# directory yourself here. +custom: + $(QUIET): no custom templates yet + +clean: + $(RM) -r blt boilerplates.made + +install: all + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(template_instdir_SQ)' + (cd blt && $(TAR) cf - .) | \ + (cd '$(DESTDIR_SQ)$(template_instdir_SQ)' && umask 022 && $(TAR) xof -) diff --git a/templates/branches-- b/templates/branches-- new file mode 100644 index 0000000000..fae88709a6 --- /dev/null +++ b/templates/branches-- @@ -0,0 +1 @@ +: this is just to ensure the directory exists. diff --git a/templates/hooks--applypatch-msg.sample b/templates/hooks--applypatch-msg.sample new file mode 100755 index 0000000000..8b2a2fe84f --- /dev/null +++ b/templates/hooks--applypatch-msg.sample @@ -0,0 +1,15 @@ +#!/bin/sh +# +# An example hook script to check the commit log message taken by +# applypatch from an e-mail message. +# +# The hook should exit with non-zero status after issuing an +# appropriate message if it wants to stop the commit. The hook is +# allowed to edit the commit message file. +# +# To enable this hook, rename this file to "applypatch-msg". + +. git-sh-setup +test -x "$GIT_DIR/hooks/commit-msg" && + exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"} +: diff --git a/templates/hooks--commit-msg.sample b/templates/hooks--commit-msg.sample new file mode 100755 index 0000000000..6ef1d29d09 --- /dev/null +++ b/templates/hooks--commit-msg.sample @@ -0,0 +1,24 @@ +#!/bin/sh +# +# An example hook script to check the commit log message. +# Called by git-commit with one argument, the name of the file +# that has the commit message. The hook should exit with non-zero +# status after issuing an appropriate message if it wants to stop the +# commit. The hook is allowed to edit the commit message file. +# +# To enable this hook, rename this file to "commit-msg". + +# Uncomment the below to add a Signed-off-by line to the message. +# Doing this in a hook is a bad idea in general, but the prepare-commit-msg +# hook is more suited to it. +# +# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p') +# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1" + +# This example catches duplicate Signed-off-by lines. + +test "" = "$(grep '^Signed-off-by: ' "$1" | + sort | uniq -c | sed -e '/^[ ]*1[ ]/d')" || { + echo >&2 Duplicate Signed-off-by lines. + exit 1 +} diff --git a/templates/hooks--post-commit.sample b/templates/hooks--post-commit.sample new file mode 100755 index 0000000000..22668216a3 --- /dev/null +++ b/templates/hooks--post-commit.sample @@ -0,0 +1,8 @@ +#!/bin/sh +# +# An example hook script that is called after a successful +# commit is made. +# +# To enable this hook, rename this file to "post-commit". + +: Nothing diff --git a/templates/hooks--post-receive.sample b/templates/hooks--post-receive.sample new file mode 100755 index 0000000000..7a83e17ab5 --- /dev/null +++ b/templates/hooks--post-receive.sample @@ -0,0 +1,15 @@ +#!/bin/sh +# +# An example hook script for the "post-receive" event. +# +# The "post-receive" script is run after receive-pack has accepted a pack +# and the repository has been updated. It is passed arguments in through +# stdin in the form +# <oldrev> <newrev> <refname> +# For example: +# aa453216d1b3e49e7f6f98441fa56946ddcd6a20 68f7abf4e6f922807889f52bc043ecd31b79f814 refs/heads/master +# +# see contrib/hooks/ for a sample, or uncomment the next line and +# rename the file to "post-receive". + +#. /usr/share/doc/git-core/contrib/hooks/post-receive-email diff --git a/templates/hooks--post-update.sample b/templates/hooks--post-update.sample new file mode 100755 index 0000000000..5323b56b81 --- /dev/null +++ b/templates/hooks--post-update.sample @@ -0,0 +1,8 @@ +#!/bin/sh +# +# An example hook script to prepare a packed repository for use over +# dumb transports. +# +# To enable this hook, rename this file to "post-update". + +exec git-update-server-info diff --git a/templates/hooks--pre-applypatch.sample b/templates/hooks--pre-applypatch.sample new file mode 100755 index 0000000000..b1f187c2e9 --- /dev/null +++ b/templates/hooks--pre-applypatch.sample @@ -0,0 +1,14 @@ +#!/bin/sh +# +# An example hook script to verify what is about to be committed +# by applypatch from an e-mail message. +# +# The hook should exit with non-zero status after issuing an +# appropriate message if it wants to stop the commit. +# +# To enable this hook, rename this file to "pre-applypatch". + +. git-sh-setup +test -x "$GIT_DIR/hooks/pre-commit" && + exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"} +: diff --git a/templates/hooks--pre-commit.sample b/templates/hooks--pre-commit.sample new file mode 100755 index 0000000000..439eefda51 --- /dev/null +++ b/templates/hooks--pre-commit.sample @@ -0,0 +1,46 @@ +#!/bin/sh +# +# An example hook script to verify what is about to be committed. +# Called by git-commit with no arguments. The hook should +# exit with non-zero status after issuing an appropriate message if +# it wants to stop the commit. +# +# To enable this hook, rename this file to "pre-commit". + +if git-rev-parse --verify HEAD >/dev/null 2>&1 +then + against=HEAD +else + # Initial commit: diff against an empty tree object + against=4b825dc642cb6eb9a060e54bf8d69288fbee4904 +fi + +# If you want to allow non-ascii filenames set this variable to true. +allownonascii=$(git config hooks.allownonascii) + +# Cross platform projects tend to avoid non-ascii filenames; prevent +# them from being added to the repository. We exploit the fact that the +# printable range starts at the space character and ends with tilde. +if [ "$allownonascii" != "true" ] && + # Note that the use of brackets around a tr range is ok here, (it's + # even required, for portability to Solaris 10's /usr/bin/tr), since + # the square bracket bytes happen to fall in the designated range. + test "$(git diff --cached --name-only --diff-filter=A -z $against | + LC_ALL=C tr -d '[ -~]\0')" +then + echo "Error: Attempt to add a non-ascii file name." + echo + echo "This can cause problems if you want to work" + echo "with people on other platforms." + echo + echo "To be portable it is advisable to rename the file ..." + echo + echo "If you know what you are doing you can disable this" + echo "check using:" + echo + echo " git config hooks.allownonascii true" + echo + exit 1 +fi + +exec git diff-index --check --cached $against -- diff --git a/templates/hooks--pre-rebase.sample b/templates/hooks--pre-rebase.sample new file mode 100755 index 0000000000..be1b06e250 --- /dev/null +++ b/templates/hooks--pre-rebase.sample @@ -0,0 +1,169 @@ +#!/bin/sh +# +# Copyright (c) 2006, 2008 Junio C Hamano +# +# The "pre-rebase" hook is run just before "git-rebase" starts doing +# its job, and can prevent the command from running by exiting with +# non-zero status. +# +# The hook is called with the following parameters: +# +# $1 -- the upstream the series was forked from. +# $2 -- the branch being rebased (or empty when rebasing the current branch). +# +# This sample shows how to prevent topic branches that are already +# merged to 'next' branch from getting rebased, because allowing it +# would result in rebasing already published history. + +publish=next +basebranch="$1" +if test "$#" = 2 +then + topic="refs/heads/$2" +else + topic=`git symbolic-ref HEAD` || + exit 0 ;# we do not interrupt rebasing detached HEAD +fi + +case "$topic" in +refs/heads/??/*) + ;; +*) + exit 0 ;# we do not interrupt others. + ;; +esac + +# Now we are dealing with a topic branch being rebased +# on top of master. Is it OK to rebase it? + +# Does the topic really exist? +git show-ref -q "$topic" || { + echo >&2 "No such branch $topic" + exit 1 +} + +# Is topic fully merged to master? +not_in_master=`git-rev-list --pretty=oneline ^master "$topic"` +if test -z "$not_in_master" +then + echo >&2 "$topic is fully merged to master; better remove it." + exit 1 ;# we could allow it, but there is no point. +fi + +# Is topic ever merged to next? If so you should not be rebasing it. +only_next_1=`git-rev-list ^master "^$topic" ${publish} | sort` +only_next_2=`git-rev-list ^master ${publish} | sort` +if test "$only_next_1" = "$only_next_2" +then + not_in_topic=`git-rev-list "^$topic" master` + if test -z "$not_in_topic" + then + echo >&2 "$topic is already up-to-date with master" + exit 1 ;# we could allow it, but there is no point. + else + exit 0 + fi +else + not_in_next=`git-rev-list --pretty=oneline ^${publish} "$topic"` + perl -e ' + my $topic = $ARGV[0]; + my $msg = "* $topic has commits already merged to public branch:\n"; + my (%not_in_next) = map { + /^([0-9a-f]+) /; + ($1 => 1); + } split(/\n/, $ARGV[1]); + for my $elem (map { + /^([0-9a-f]+) (.*)$/; + [$1 => $2]; + } split(/\n/, $ARGV[2])) { + if (!exists $not_in_next{$elem->[0]}) { + if ($msg) { + print STDERR $msg; + undef $msg; + } + print STDERR " $elem->[1]\n"; + } + } + ' "$topic" "$not_in_next" "$not_in_master" + exit 1 +fi + +exit 0 + +################################################################ + +This sample hook safeguards topic branches that have been +published from being rewound. + +The workflow assumed here is: + + * Once a topic branch forks from "master", "master" is never + merged into it again (either directly or indirectly). + + * Once a topic branch is fully cooked and merged into "master", + it is deleted. If you need to build on top of it to correct + earlier mistakes, a new topic branch is created by forking at + the tip of the "master". This is not strictly necessary, but + it makes it easier to keep your history simple. + + * Whenever you need to test or publish your changes to topic + branches, merge them into "next" branch. + +The script, being an example, hardcodes the publish branch name +to be "next", but it is trivial to make it configurable via +$GIT_DIR/config mechanism. + +With this workflow, you would want to know: + +(1) ... if a topic branch has ever been merged to "next". Young + topic branches can have stupid mistakes you would rather + clean up before publishing, and things that have not been + merged into other branches can be easily rebased without + affecting other people. But once it is published, you would + not want to rewind it. + +(2) ... if a topic branch has been fully merged to "master". + Then you can delete it. More importantly, you should not + build on top of it -- other people may already want to + change things related to the topic as patches against your + "master", so if you need further changes, it is better to + fork the topic (perhaps with the same name) afresh from the + tip of "master". + +Let's look at this example: + + o---o---o---o---o---o---o---o---o---o "next" + / / / / + / a---a---b A / / + / / / / + / / c---c---c---c B / + / / / \ / + / / / b---b C \ / + / / / / \ / + ---o---o---o---o---o---o---o---o---o---o---o "master" + + +A, B and C are topic branches. + + * A has one fix since it was merged up to "next". + + * B has finished. It has been fully merged up to "master" and "next", + and is ready to be deleted. + + * C has not merged to "next" at all. + +We would want to allow C to be rebased, refuse A, and encourage +B to be deleted. + +To compute (1): + + git-rev-list ^master ^topic next + git-rev-list ^master next + + if these match, topic has not merged in next at all. + +To compute (2): + + git-rev-list master..topic + + if this is empty, it is fully merged to "master". diff --git a/templates/hooks--prepare-commit-msg.sample b/templates/hooks--prepare-commit-msg.sample new file mode 100755 index 0000000000..365242499d --- /dev/null +++ b/templates/hooks--prepare-commit-msg.sample @@ -0,0 +1,36 @@ +#!/bin/sh +# +# An example hook script to prepare the commit log message. +# Called by git-commit with the name of the file that has the +# commit message, followed by the description of the commit +# message's source. The hook's purpose is to edit the commit +# message file. If the hook fails with a non-zero status, +# the commit is aborted. +# +# To enable this hook, rename this file to "prepare-commit-msg". + +# This hook includes three examples. The first comments out the +# "Conflicts:" part of a merge commit. +# +# The second includes the output of "git diff --name-status -r" +# into the message, just before the "git status" output. It is +# commented because it doesn't cope with --amend or with squashed +# commits. +# +# The third example adds a Signed-off-by line to the message, that can +# still be edited. This is rarely a good idea. + +case "$2,$3" in + merge,) + perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;; + +# ,|template,) +# perl -i.bak -pe ' +# print "\n" . `git diff --cached --name-status -r` +# if /^#/ && $first++ == 0' "$1" ;; + + *) ;; +esac + +# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p') +# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1" diff --git a/templates/hooks--update.sample b/templates/hooks--update.sample new file mode 100755 index 0000000000..fd63b2d662 --- /dev/null +++ b/templates/hooks--update.sample @@ -0,0 +1,128 @@ +#!/bin/sh +# +# An example hook script to blocks unannotated tags from entering. +# Called by git-receive-pack with arguments: refname sha1-old sha1-new +# +# To enable this hook, rename this file to "update". +# +# Config +# ------ +# hooks.allowunannotated +# This boolean sets whether unannotated tags will be allowed into the +# repository. By default they won't be. +# hooks.allowdeletetag +# This boolean sets whether deleting tags will be allowed in the +# repository. By default they won't be. +# hooks.allowmodifytag +# This boolean sets whether a tag may be modified after creation. By default +# it won't be. +# hooks.allowdeletebranch +# This boolean sets whether deleting branches will be allowed in the +# repository. By default they won't be. +# hooks.denycreatebranch +# This boolean sets whether remotely creating branches will be denied +# in the repository. By default this is allowed. +# + +# --- Command line +refname="$1" +oldrev="$2" +newrev="$3" + +# --- Safety check +if [ -z "$GIT_DIR" ]; then + echo "Don't run this script from the command line." >&2 + echo " (if you want, you could supply GIT_DIR then run" >&2 + echo " $0 <ref> <oldrev> <newrev>)" >&2 + exit 1 +fi + +if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then + echo "Usage: $0 <ref> <oldrev> <newrev>" >&2 + exit 1 +fi + +# --- Config +allowunannotated=$(git config --bool hooks.allowunannotated) +allowdeletebranch=$(git config --bool hooks.allowdeletebranch) +denycreatebranch=$(git config --bool hooks.denycreatebranch) +allowdeletetag=$(git config --bool hooks.allowdeletetag) +allowmodifytag=$(git config --bool hooks.allowmodifytag) + +# check for no description +projectdesc=$(sed -e '1q' "$GIT_DIR/description") +case "$projectdesc" in +"Unnamed repository"* | "") + echo "*** Project description file hasn't been set" >&2 + exit 1 + ;; +esac + +# --- Check types +# if $newrev is 0000...0000, it's a commit to delete a ref. +zero="0000000000000000000000000000000000000000" +if [ "$newrev" = "$zero" ]; then + newrev_type=delete +else + newrev_type=$(git-cat-file -t $newrev) +fi + +case "$refname","$newrev_type" in + refs/tags/*,commit) + # un-annotated tag + short_refname=${refname##refs/tags/} + if [ "$allowunannotated" != "true" ]; then + echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2 + echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2 + exit 1 + fi + ;; + refs/tags/*,delete) + # delete tag + if [ "$allowdeletetag" != "true" ]; then + echo "*** Deleting a tag is not allowed in this repository" >&2 + exit 1 + fi + ;; + refs/tags/*,tag) + # annotated tag + if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1 + then + echo "*** Tag '$refname' already exists." >&2 + echo "*** Modifying a tag is not allowed in this repository." >&2 + exit 1 + fi + ;; + refs/heads/*,commit) + # branch + if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then + echo "*** Creating a branch is not allowed in this repository" >&2 + exit 1 + fi + ;; + refs/heads/*,delete) + # delete branch + if [ "$allowdeletebranch" != "true" ]; then + echo "*** Deleting a branch is not allowed in this repository" >&2 + exit 1 + fi + ;; + refs/remotes/*,commit) + # tracking branch + ;; + refs/remotes/*,delete) + # delete tracking branch + if [ "$allowdeletebranch" != "true" ]; then + echo "*** Deleting a tracking branch is not allowed in this repository" >&2 + exit 1 + fi + ;; + *) + # Anything else (is there anything else?) + echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2 + exit 1 + ;; +esac + +# --- Finished +exit 0 diff --git a/templates/info--exclude b/templates/info--exclude new file mode 100644 index 0000000000..2c87b72dff --- /dev/null +++ b/templates/info--exclude @@ -0,0 +1,6 @@ +# git-ls-files --others --exclude-from=.git/info/exclude +# Lines that start with '#' are comments. +# For a project mostly in C, the following would be a good set of +# exclude patterns (uncomment them if you want to use them): +# *.[oa] +# *~ diff --git a/templates/this--description b/templates/this--description new file mode 100644 index 0000000000..498b267a8c --- /dev/null +++ b/templates/this--description @@ -0,0 +1 @@ +Unnamed repository; edit this file 'description' to name the repository. |