diff options
Diffstat (limited to 't')
42 files changed, 1412 insertions, 426 deletions
@@ -258,16 +258,21 @@ For an individual test suite --run could be used to specify that only some tests should be run or that some tests should be excluded from a run. -The argument for --run is a list of individual test numbers or -ranges with an optional negation prefix that define what tests in -a test suite to include in the run. A range is two numbers -separated with a dash and matches a range of tests with both ends -been included. You may omit the first or the second number to -mean "from the first test" or "up to the very last test" -respectively. - -Optional prefix of '!' means that the test or a range of tests -should be excluded from the run. +The argument for --run, <test-selector>, is a list of description +substrings or globs or individual test numbers or ranges with an +optional negation prefix (of '!') that define what tests in a test +suite to include (or exclude, if negated) in the run. A range is two +numbers separated with a dash and matches a range of tests with both +ends been included. You may omit the first or the second number to +mean "from the first test" or "up to the very last test" respectively. + +The argument to --run is split on commas into separate strings, +numbers, and ranges, and picks all tests that match any of the +individual selection criteria. If the substring of the description +text that you want to match includes a comma, use the glob character +'?' instead. For example --run='rebase,merge?cherry-pick' would match +on all tests that match either the glob *rebase* or the glob +*merge?cherry-pick*. If --run starts with an unprefixed number or range the initial set of tests to run is empty. If the first item starts with '!' @@ -275,9 +280,6 @@ all the tests are added to the initial set. After initial set is determined every test number or range is added or excluded from the set one by one, from left to right. -Individual numbers or ranges could be separated either by a space -or a comma. - For example, to run only tests up to a specific test (21), one could do this: @@ -290,7 +292,7 @@ or this: Common case is to run several setup tests (1, 2, 3) and then a specific test (21) that relies on that setup: - $ sh ./t9200-git-cvsexport-commit.sh --run='1 2 3 21' + $ sh ./t9200-git-cvsexport-commit.sh --run='1,2,3,21' or: @@ -298,17 +300,17 @@ or: or: - $ sh ./t9200-git-cvsexport-commit.sh --run='-3 21' + $ sh ./t9200-git-cvsexport-commit.sh --run='-3,21' As noted above, the test set is built by going through the items from left to right, so this: - $ sh ./t9200-git-cvsexport-commit.sh --run='1-4 !3' + $ sh ./t9200-git-cvsexport-commit.sh --run='1-4,!3' will run tests 1, 2, and 4. Items that come later have higher precedence. It means that this: - $ sh ./t9200-git-cvsexport-commit.sh --run='!3 1-4' + $ sh ./t9200-git-cvsexport-commit.sh --run='!3,1-4' would just run tests from 1 to 4, including 3. @@ -317,6 +319,18 @@ test in the test suite except from 7 up to 11: $ sh ./t9200-git-cvsexport-commit.sh --run='!7-11' +Sometimes there may be multiple tests with e.g. "setup" in their name +that are needed and rather than figuring out the number for all of them +we can just use "setup" as a substring/glob to match against the test +description: + + $ sh ./t0050-filesystem.sh --run=setup,9-11 + +or one could select both the setup tests and the rename ones (assuming all +relevant tests had those words in their descriptions): + + $ sh ./t0050-filesystem.sh --run=setup,rename + Some tests in a test suite rely on the previous tests performing certain actions, specifically some tests are designated as "setup" test, so you cannot _arbitrarily_ disable one test and diff --git a/t/helper/test-pkt-line.c b/t/helper/test-pkt-line.c index 69152958e5..5e638f0b97 100644 --- a/t/helper/test-pkt-line.c +++ b/t/helper/test-pkt-line.c @@ -84,6 +84,25 @@ static void unpack_sideband(void) } } +static int send_split_sideband(void) +{ + const char *part1 = "Hello,"; + const char *primary = "\001primary: regular output\n"; + const char *part2 = " world!\n"; + + send_sideband(1, 2, part1, strlen(part1), LARGE_PACKET_MAX); + packet_write(1, primary, strlen(primary)); + send_sideband(1, 2, part2, strlen(part2), LARGE_PACKET_MAX); + packet_response_end(1); + + return 0; +} + +static int receive_sideband(void) +{ + return recv_sideband("sideband", 0, 1); +} + int cmd__pkt_line(int argc, const char **argv) { if (argc < 2) @@ -95,6 +114,10 @@ int cmd__pkt_line(int argc, const char **argv) unpack(); else if (!strcmp(argv[1], "unpack-sideband")) unpack_sideband(); + else if (!strcmp(argv[1], "send-split-sideband")) + send_split_sideband(); + else if (!strcmp(argv[1], "receive-sideband")) + receive_sideband(); else die("invalid argument '%s'", argv[1]); diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 923281af93..22489c24dc 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -430,7 +430,7 @@ test_expect_success 'GIT_SKIP_TESTS does not skip unmatched suite' " test_expect_success '--run basic' " run_sub_test_lib_test run-basic \ - '--run basic' --run='1 3 5' <<-\\EOF && + '--run basic' --run='1,3,5' <<-\\EOF && for i in 1 2 3 4 5 6 do test_expect_success \"passing test #\$i\" 'true' @@ -472,7 +472,7 @@ test_expect_success '--run with a range' " test_expect_success '--run with two ranges' " run_sub_test_lib_test run-two-ranges \ - '--run with two ranges' --run='1-2 5-6' <<-\\EOF && + '--run with two ranges' --run='1-2,5-6' <<-\\EOF && for i in 1 2 3 4 5 6 do test_expect_success \"passing test #\$i\" 'true' @@ -556,7 +556,7 @@ test_expect_success '--run with basic negation' " test_expect_success '--run with two negations' " run_sub_test_lib_test run-two-neg \ - '--run with two negations' --run='"'!3 !6'"' <<-\\EOF && + '--run with two negations' --run='"'!3,!6'"' <<-\\EOF && for i in 1 2 3 4 5 6 do test_expect_success \"passing test #\$i\" 'true' @@ -577,7 +577,7 @@ test_expect_success '--run with two negations' " test_expect_success '--run a range and negation' " run_sub_test_lib_test run-range-and-neg \ - '--run a range and negation' --run='"'-4 !2'"' <<-\\EOF && + '--run a range and negation' --run='"'-4,!2'"' <<-\\EOF && for i in 1 2 3 4 5 6 do test_expect_success \"passing test #\$i\" 'true' @@ -620,7 +620,7 @@ test_expect_success '--run range negation' " test_expect_success '--run include, exclude and include' " run_sub_test_lib_test run-inc-neg-inc \ '--run include, exclude and include' \ - --run='"'1-5 !1-3 2'"' <<-\\EOF && + --run='"'1-5,!1-3,2'"' <<-\\EOF && for i in 1 2 3 4 5 6 do test_expect_success \"passing test #\$i\" 'true' @@ -664,7 +664,7 @@ test_expect_success '--run include, exclude and include, comma separated' " test_expect_success '--run exclude and include' " run_sub_test_lib_test run-neg-inc \ '--run exclude and include' \ - --run='"'!3- 5'"' <<-\\EOF && + --run='"'!3-,5'"' <<-\\EOF && for i in 1 2 3 4 5 6 do test_expect_success \"passing test #\$i\" 'true' @@ -705,7 +705,31 @@ test_expect_success '--run empty selectors' " EOF " -test_expect_success '--run invalid range start' " +test_expect_success '--run substring selector' " + run_sub_test_lib_test run-substring-selector \ + '--run empty selectors' \ + --run='relevant' <<-\\EOF && + test_expect_success \"relevant test\" 'true' + for i in 1 2 3 4 5 6 + do + test_expect_success \"other test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-substring-selector <<-\\EOF + > ok 1 - relevant test + > ok 2 # skip other test #1 (--run) + > ok 3 # skip other test #2 (--run) + > ok 4 # skip other test #3 (--run) + > ok 5 # skip other test #4 (--run) + > ok 6 # skip other test #5 (--run) + > ok 7 # skip other test #6 (--run) + > # passed all 7 test(s) + > 1..7 + EOF +" + +test_expect_success '--run keyword selection' " run_sub_test_lib_test_err run-inv-range-start \ '--run invalid range start' \ --run='a-5' <<-\\EOF && @@ -735,21 +759,6 @@ test_expect_success '--run invalid range end' " EOF_ERR " -test_expect_success '--run invalid selector' " - run_sub_test_lib_test_err run-inv-selector \ - '--run invalid selector' \ - --run='1?' <<-\\EOF && - test_expect_success \"passing test #1\" 'true' - test_done - EOF - check_sub_test_lib_test_err run-inv-selector \ - <<-\\EOF_OUT 3<<-\\EOF_ERR - > FATAL: Unexpected exit with code 1 - EOF_OUT - > error: --run: invalid non-numeric in test selector: '1?' - EOF_ERR -" - test_set_prereq HAVEIT haveit=no @@ -1191,7 +1200,7 @@ test_expect_success 'writing this tree with --missing-ok' ' test_expect_success 'git read-tree followed by write-tree should be idempotent' ' rm -f .git/index && git read-tree $tree && - test -f .git/index && + test_path_is_file .git/index && newtree=$(git write-tree) && test "$newtree" = "$tree" ' diff --git a/t/t0070-fundamental.sh b/t/t0070-fundamental.sh index 7b111a56fd..357201640a 100755 --- a/t/t0070-fundamental.sh +++ b/t/t0070-fundamental.sh @@ -34,4 +34,10 @@ test_expect_success 'check for a bug in the regex routines' ' test-tool regex --bug ' +test_expect_success 'incomplete sideband messages are reassembled' ' + test-tool pkt-line send-split-sideband >split-sideband && + test-tool pkt-line receive-sideband <split-sideband 2>err && + grep "Hello, world" err +' + test_done diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index bc2d74098f..a18f8a473b 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -265,6 +265,32 @@ test_expect_success 'internal getpass does not ask for known username' ' EOF ' +test_expect_success 'git-credential respects core.askPass' ' + write_script alternate-askpass <<-\EOF && + echo >&2 "alternate askpass invoked" + echo alternate-value + EOF + test_config core.askpass "$PWD/alternate-askpass" && + ( + # unset GIT_ASKPASS set by lib-credential.sh which would + # override our config, but do so in a subshell so that we do + # not interfere with other tests + sane_unset GIT_ASKPASS && + check fill <<-\EOF + protocol=http + host=example.com + -- + protocol=http + host=example.com + username=alternate-value + password=alternate-value + -- + alternate askpass invoked + alternate askpass invoked + EOF + ) +' + HELPER="!f() { cat >/dev/null echo username=foo diff --git a/t/t2016-checkout-patch.sh b/t/t2016-checkout-patch.sh index 47aeb0b167..d91a329eb3 100755 --- a/t/t2016-checkout-patch.sh +++ b/t/t2016-checkout-patch.sh @@ -18,6 +18,10 @@ test_expect_success PERL 'setup' ' # note: bar sorts before dir/foo, so the first 'n' is always to skip 'bar' +# NEEDSWORK: Since the builtin add-p is used when $GIT_TEST_ADD_I_USE_BUILTIN +# is given, we should replace the PERL prerequisite with an ADD_I prerequisite +# which first checks if $GIT_TEST_ADD_I_USE_BUILTIN is defined before checking +# PERL. test_expect_success PERL 'saying "n" does nothing' ' set_and_save_state dir/foo work head && test_write_lines n n | git checkout -p && @@ -59,6 +63,13 @@ test_expect_success PERL 'git checkout -p HEAD with change already staged' ' verify_state dir/foo head head ' +test_expect_success PERL 'git checkout -p HEAD^...' ' + # the third n is to get out in case it mistakenly does not apply + test_write_lines n y n | git checkout -p HEAD^... && + verify_saved_state bar && + verify_state dir/foo parent parent +' + test_expect_success PERL 'git checkout -p HEAD^' ' # the third n is to get out in case it mistakenly does not apply test_write_lines n y n | git checkout -p HEAD^ && diff --git a/t/t2024-checkout-dwim.sh b/t/t2024-checkout-dwim.sh index accfa9aa4b..a4f8d3a67e 100755 --- a/t/t2024-checkout-dwim.sh +++ b/t/t2024-checkout-dwim.sh @@ -166,6 +166,17 @@ test_expect_success '--no-guess suppresses branch auto-vivification' ' test_branch master ' +test_expect_success 'checkout.guess = false suppresses branch auto-vivification' ' + git checkout -B master && + status_uno_is_clean && + test_might_fail git branch -D bar && + + test_config checkout.guess false && + test_must_fail git checkout bar && + test_must_fail git rev-parse --verify refs/heads/bar && + test_branch master +' + test_expect_success 'setup more remotes with unconventional refspecs' ' git checkout -B master && status_uno_is_clean && diff --git a/t/t2060-switch.sh b/t/t2060-switch.sh index 2c1b8c0d6d..68c9101b02 100755 --- a/t/t2060-switch.sh +++ b/t/t2060-switch.sh @@ -85,9 +85,12 @@ test_expect_success 'switching ignores file of same branch name' ' test_cmp expected actual ' -test_expect_success 'guess and create branch ' ' +test_expect_success 'guess and create branch' ' test_when_finished git switch master && test_must_fail git switch --no-guess foo && + test_config checkout.guess false && + test_must_fail git switch foo && + test_config checkout.guess true && git switch foo && echo refs/heads/foo >expected && git symbolic-ref HEAD >actual && diff --git a/t/t2071-restore-patch.sh b/t/t2071-restore-patch.sh index 98b2476e7c..b5c5c0ff7e 100755 --- a/t/t2071-restore-patch.sh +++ b/t/t2071-restore-patch.sh @@ -60,6 +60,14 @@ test_expect_success PERL 'git restore -p --source=HEAD^' ' verify_state dir/foo parent index ' +test_expect_success PERL 'git restore -p --source=HEAD^...' ' + set_state dir/foo work index && + # the third n is to get out in case it mistakenly does not apply + test_write_lines n y n | git restore -p --source=HEAD^... && + verify_saved_state bar && + verify_state dir/foo parent index +' + test_expect_success PERL 'git restore -p handles deletion' ' set_state dir/foo work index && rm dir/foo && diff --git a/t/t2402-worktree-list.sh b/t/t2402-worktree-list.sh index 52585ec2aa..b85bd2655d 100755 --- a/t/t2402-worktree-list.sh +++ b/t/t2402-worktree-list.sh @@ -61,6 +61,16 @@ test_expect_success '"list" all worktrees --porcelain' ' test_cmp expect actual ' +test_expect_success '"list" all worktress with locked annotation' ' + test_when_finished "rm -rf locked unlocked out && git worktree prune" && + git worktree add --detach locked master && + git worktree add --detach unlocked master && + git worktree lock locked && + git worktree list >out && + grep "/locked *[0-9a-f].* locked$" out && + ! grep "/unlocked *[0-9a-f].* locked$" out +' + test_expect_success 'bare repo setup' ' git init --bare bare1 && echo "data" >file1 && diff --git a/t/t3435-rebase-gpg-sign.sh b/t/t3435-rebase-gpg-sign.sh index b47c59c190..54120b09d6 100755 --- a/t/t3435-rebase-gpg-sign.sh +++ b/t/t3435-rebase-gpg-sign.sh @@ -68,4 +68,60 @@ test_expect_failure 'rebase -p --no-gpg-sign override commit.gpgsign' ' test_must_fail git verify-commit HEAD ' +test_expect_success 'rebase -r, merge strategy, --gpg-sign will sign commit' ' + git reset --hard merged && + test_unconfig commit.gpgsign && + git rebase -fr --gpg-sign -s resolve --root && + git verify-commit HEAD +' + +test_expect_success 'rebase -r, merge strategy, commit.gpgsign=true will sign commit' ' + git reset --hard merged && + git config commit.gpgsign true && + git rebase -fr -s resolve --root && + git verify-commit HEAD +' + +test_expect_success 'rebase -r, merge strategy, commit.gpgsign=false --gpg-sign will sign commit' ' + git reset --hard merged && + git config commit.gpgsign false && + git rebase -fr --gpg-sign -s resolve --root && + git verify-commit HEAD +' + +test_expect_success "rebase -r, merge strategy, commit.gpgsign=true --no-gpg-sign won't sign commit" ' + git reset --hard merged && + git config commit.gpgsign true && + git rebase -fr --no-gpg-sign -s resolve --root && + test_must_fail git verify-commit HEAD +' + +test_expect_success 'rebase -r --gpg-sign will sign commit' ' + git reset --hard merged && + test_unconfig commit.gpgsign && + git rebase -fr --gpg-sign --root && + git verify-commit HEAD +' + +test_expect_success 'rebase -r with commit.gpgsign=true will sign commit' ' + git reset --hard merged && + git config commit.gpgsign true && + git rebase -fr --root && + git verify-commit HEAD +' + +test_expect_success 'rebase -r --gpg-sign with commit.gpgsign=false will sign commit' ' + git reset --hard merged && + git config commit.gpgsign false && + git rebase -fr --gpg-sign --root && + git verify-commit HEAD +' + +test_expect_success "rebase -r --no-gpg-sign with commit.gpgsign=true won't sign commit" ' + git reset --hard merged && + git config commit.gpgsign true && + git rebase -fr --no-gpg-sign --root && + test_must_fail git verify-commit HEAD +' + test_done diff --git a/t/t3436-rebase-more-options.sh b/t/t3436-rebase-more-options.sh index 996e82787e..eaaf4c8d1d 100755 --- a/t/t3436-rebase-more-options.sh +++ b/t/t3436-rebase-more-options.sh @@ -65,8 +65,8 @@ test_expect_success '--ignore-whitespace is remembered when continuing' ' ' test_ctime_is_atime () { - git log $1 --format=%ai >authortime && - git log $1 --format=%ci >committertime && + git log $1 --format="$GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> %ai" >authortime && + git log $1 --format="%cn <%ce> %ci" >committertime && test_cmp authortime committertime } diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 5c7b0122b4..f72d456d3b 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -6,6 +6,7 @@ test_description='Various diff formatting options' . ./test-lib.sh +. "$TEST_DIRECTORY"/diff-lib.sh test_expect_success setup ' @@ -333,6 +334,7 @@ log -SF master --max-count=2 log -GF master log -GF -p master log -GF -p --pickaxe-all master +log -IA -IB -I1 -I2 -p master log --decorate --all log --decorate=full --all @@ -473,4 +475,43 @@ test_expect_success 'diff-tree --stdin with log formatting' ' test_cmp expect actual ' +test_expect_success 'diff -I<regex>: setup' ' + git checkout master && + test_seq 50 >file0 && + git commit -m "Set up -I<regex> test file" file0 && + test_seq 50 | sed -e "s/13/ten and three/" -e "/7\$/d" >file0 && + echo >>file0 +' +test_expect_success 'diff -I<regex>' ' + git diff --ignore-blank-lines -I"ten.*e" -I"^[124-9]" >actual && + cat >expect <<-\EOF && + diff --git a/file0 b/file0 + --- a/file0 + +++ b/file0 + @@ -34,7 +31,6 @@ + 34 + 35 + 36 + -37 + 38 + 39 + 40 + EOF + compare_diff_patch expect actual +' + +test_expect_success 'diff -I<regex> --stat' ' + git diff --stat --ignore-blank-lines -I"ten.*e" -I"^[124-9]" >actual && + cat >expect <<-\EOF && + file0 | 1 - + 1 file changed, 1 deletion(-) + EOF + test_cmp expect actual +' + +test_expect_success 'diff -I<regex>: detect malformed regex' ' + test_expect_code 129 git diff --ignore-matching-lines="^[124-9" 2>error && + test_i18ngrep "invalid regex given to -I: " error +' + test_done diff --git a/t/t4013/diff.log_-IA_-IB_-I1_-I2_-p_master b/t/t4013/diff.log_-IA_-IB_-I1_-I2_-p_master new file mode 100644 index 0000000000..929f35a05b --- /dev/null +++ b/t/t4013/diff.log_-IA_-IB_-I1_-I2_-p_master @@ -0,0 +1,99 @@ +$ git log -IA -IB -I1 -I2 -p master +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 +Merge: 9a6d494 c7a2ab9 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:04:00 2006 +0000 + + Merge branch 'side' + +commit c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:03:00 2006 +0000 + + Side + +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 + +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third + +diff --git a/dir/sub b/dir/sub +index 8422d40..cead32e 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -2,3 +2,5 @@ A + B + C + D ++E ++F +diff --git a/file1 b/file1 +new file mode 100644 +index 0000000..b1e6722 +--- /dev/null ++++ b/file1 +@@ -0,0 +1,3 @@ ++A ++B ++C + +commit 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:01:00 2006 +0000 + + Second + + This is the second commit. + +diff --git a/dir/sub b/dir/sub +index 35d242b..8422d40 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++C ++D +diff --git a/file0 b/file0 +index 01e79c3..b414108 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++4 ++5 ++6 +diff --git a/file2 b/file2 +deleted file mode 100644 +index 01e79c3..0000000 +--- a/file2 ++++ /dev/null +@@ -1,3 +0,0 @@ +-1 +-2 +-3 + +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial +$ diff --git a/t/t4018/css-attribute-value-selector b/t/t4018/css-attribute-value-selector new file mode 100644 index 0000000000..918256b20c --- /dev/null +++ b/t/t4018/css-attribute-value-selector @@ -0,0 +1,4 @@ +[class*="RIGHT"] { + background : #000; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/css-block-level-@-statements b/t/t4018/css-block-level-@-statements new file mode 100644 index 0000000000..d6755f2f3d --- /dev/null +++ b/t/t4018/css-block-level-@-statements @@ -0,0 +1,10 @@ +@keyframes RIGHT { + from { + background : #000; + border : 10px ChangeMe #C6C6C6; + } + to { + background : #fff; + border : 10px solid #C6C6C6; + } +} diff --git a/t/t4018/css-class-selector b/t/t4018/css-class-selector new file mode 100644 index 0000000000..f790a0062f --- /dev/null +++ b/t/t4018/css-class-selector @@ -0,0 +1,4 @@ +.RIGHT { + background : #000; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/css-id-selector b/t/t4018/css-id-selector new file mode 100644 index 0000000000..17c5111052 --- /dev/null +++ b/t/t4018/css-id-selector @@ -0,0 +1,4 @@ +#RIGHT { + background : #000; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/css-root-selector b/t/t4018/css-root-selector new file mode 100644 index 0000000000..22b958e369 --- /dev/null +++ b/t/t4018/css-root-selector @@ -0,0 +1,4 @@ +:RIGHT { + background : #000; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/php-abstract-method b/t/t4018/php-abstract-method new file mode 100644 index 0000000000..ce215df75a --- /dev/null +++ b/t/t4018/php-abstract-method @@ -0,0 +1,7 @@ +abstract class Klass +{ + abstract public function RIGHT(): ?string + { + return 'ChangeMe'; + } +} diff --git a/t/t4018/php-final-method b/t/t4018/php-final-method new file mode 100644 index 0000000000..537fb8ad9a --- /dev/null +++ b/t/t4018/php-final-method @@ -0,0 +1,7 @@ +class Klass +{ + final public function RIGHT(): string + { + return 'ChangeMe'; + } +} diff --git a/t/t4018/rust-macro-rules b/t/t4018/rust-macro-rules new file mode 100644 index 0000000000..ec610c5b62 --- /dev/null +++ b/t/t4018/rust-macro-rules @@ -0,0 +1,6 @@ +macro_rules! RIGHT { + () => { + // a comment + let x = ChangeMe; + }; +} diff --git a/t/t4068-diff-symmetric-merge-base.sh b/t/t4068-diff-symmetric-merge-base.sh new file mode 100755 index 0000000000..03487cc945 --- /dev/null +++ b/t/t4068-diff-symmetric-merge-base.sh @@ -0,0 +1,193 @@ +#!/bin/sh + +test_description='behavior of diff with symmetric-diff setups and --merge-base' + +. ./test-lib.sh + +# build these situations: +# - normal merge with one merge base (br1...b2r); +# - criss-cross merge ie 2 merge bases (br1...master); +# - disjoint subgraph (orphan branch, br3...master). +# +# B---E <-- master +# / \ / +# A X +# \ / \ +# C---D--G <-- br1 +# \ / +# ---F <-- br2 +# +# H <-- br3 +# +# We put files into a few commits so that we can verify the +# output as well. + +test_expect_success setup ' + git commit --allow-empty -m A && + echo b >b && + git add b && + git commit -m B && + git checkout -b br1 HEAD^ && + echo c >c && + git add c && + git commit -m C && + git tag commit-C && + git merge -m D master && + git tag commit-D && + git checkout master && + git merge -m E commit-C && + git checkout -b br2 commit-C && + echo f >f && + git add f && + git commit -m F && + git checkout br1 && + git merge -m G br2 && + git checkout --orphan br3 && + git commit -m H +' + +test_expect_success 'diff with one merge base' ' + git diff commit-D...br1 >tmp && + tail -n 1 tmp >actual && + echo +f >expect && + test_cmp expect actual +' + +# The output (in tmp) can have +b or +c depending +# on which merge base (commit B or C) is picked. +# It should have one of those two, which comes out +# to seven lines. +test_expect_success 'diff with two merge bases' ' + git diff br1...master >tmp 2>err && + test_line_count = 7 tmp && + test_line_count = 1 err +' + +test_expect_success 'diff with no merge bases' ' + test_must_fail git diff br2...br3 2>err && + test_i18ngrep "fatal: br2...br3: no merge base" err +' + +test_expect_success 'diff with too many symmetric differences' ' + test_must_fail git diff br1...master br2...br3 2>err && + test_i18ngrep "usage" err +' + +test_expect_success 'diff with symmetric difference and extraneous arg' ' + test_must_fail git diff master br1...master 2>err && + test_i18ngrep "usage" err +' + +test_expect_success 'diff with two ranges' ' + test_must_fail git diff master br1..master br2..br3 2>err && + test_i18ngrep "usage" err +' + +test_expect_success 'diff with ranges and extra arg' ' + test_must_fail git diff master br1..master commit-D 2>err && + test_i18ngrep "usage" err +' + +test_expect_success 'diff --merge-base with no commits' ' + test_must_fail git diff --merge-base +' + +test_expect_success 'diff --merge-base with three commits' ' + test_must_fail git diff --merge-base br1 br2 master 2>err && + test_i18ngrep "usage" err +' + +for cmd in diff-index diff +do + test_expect_success "$cmd --merge-base with one commit" ' + git checkout master && + git $cmd commit-C >expect && + git $cmd --merge-base br2 >actual && + test_cmp expect actual + ' + + test_expect_success "$cmd --merge-base with one commit and unstaged changes" ' + git checkout master && + test_when_finished git reset --hard && + echo unstaged >>c && + git $cmd commit-C >expect && + git $cmd --merge-base br2 >actual && + test_cmp expect actual + ' + + test_expect_success "$cmd --merge-base with one commit and staged and unstaged changes" ' + git checkout master && + test_when_finished git reset --hard && + echo staged >>c && + git add c && + echo unstaged >>c && + git $cmd commit-C >expect && + git $cmd --merge-base br2 >actual && + test_cmp expect actual + ' + + test_expect_success "$cmd --merge-base --cached with one commit and staged and unstaged changes" ' + git checkout master && + test_when_finished git reset --hard && + echo staged >>c && + git add c && + echo unstaged >>c && + git $cmd --cached commit-C >expect && + git $cmd --cached --merge-base br2 >actual && + test_cmp expect actual + ' + + test_expect_success "$cmd --merge-base with non-commit" ' + git checkout master && + test_must_fail git $cmd --merge-base master^{tree} 2>err && + test_i18ngrep "fatal: --merge-base only works with commits" err + ' + + test_expect_success "$cmd --merge-base with no merge bases and one commit" ' + git checkout master && + test_must_fail git $cmd --merge-base br3 2>err && + test_i18ngrep "fatal: no merge base found" err + ' + + test_expect_success "$cmd --merge-base with multiple merge bases and one commit" ' + git checkout master && + test_must_fail git $cmd --merge-base br1 2>err && + test_i18ngrep "fatal: multiple merge bases found" err + ' +done + +for cmd in diff-tree diff +do + test_expect_success "$cmd --merge-base with two commits" ' + git $cmd commit-C master >expect && + git $cmd --merge-base br2 master >actual && + test_cmp expect actual + ' + + test_expect_success "$cmd --merge-base commit and non-commit" ' + test_must_fail git $cmd --merge-base br2 master^{tree} 2>err && + test_i18ngrep "fatal: --merge-base only works with commits" err + ' + + test_expect_success "$cmd --merge-base with no merge bases and two commits" ' + test_must_fail git $cmd --merge-base br2 br3 2>err && + test_i18ngrep "fatal: no merge base found" err + ' + + test_expect_success "$cmd --merge-base with multiple merge bases and two commits" ' + test_must_fail git $cmd --merge-base master br1 2>err && + test_i18ngrep "fatal: multiple merge bases found" err + ' +done + +test_expect_success 'diff-tree --merge-base with one commit' ' + test_must_fail git diff-tree --merge-base master 2>err && + test_i18ngrep "fatal: --merge-base only works with two commits" err +' + +test_expect_success 'diff --merge-base with range' ' + test_must_fail git diff --merge-base br2..br3 2>err && + test_i18ngrep "fatal: --merge-base does not work with ranges" err +' + +test_done diff --git a/t/t4068-diff-symmetric.sh b/t/t4068-diff-symmetric.sh deleted file mode 100755 index 31d17a5af0..0000000000 --- a/t/t4068-diff-symmetric.sh +++ /dev/null @@ -1,91 +0,0 @@ -#!/bin/sh - -test_description='behavior of diff with symmetric-diff setups' - -. ./test-lib.sh - -# build these situations: -# - normal merge with one merge base (br1...b2r); -# - criss-cross merge ie 2 merge bases (br1...master); -# - disjoint subgraph (orphan branch, br3...master). -# -# B---E <-- master -# / \ / -# A X -# \ / \ -# C---D--G <-- br1 -# \ / -# ---F <-- br2 -# -# H <-- br3 -# -# We put files into a few commits so that we can verify the -# output as well. - -test_expect_success setup ' - git commit --allow-empty -m A && - echo b >b && - git add b && - git commit -m B && - git checkout -b br1 HEAD^ && - echo c >c && - git add c && - git commit -m C && - git tag commit-C && - git merge -m D master && - git tag commit-D && - git checkout master && - git merge -m E commit-C && - git checkout -b br2 commit-C && - echo f >f && - git add f && - git commit -m F && - git checkout br1 && - git merge -m G br2 && - git checkout --orphan br3 && - git commit -m H -' - -test_expect_success 'diff with one merge base' ' - git diff commit-D...br1 >tmp && - tail -n 1 tmp >actual && - echo +f >expect && - test_cmp expect actual -' - -# The output (in tmp) can have +b or +c depending -# on which merge base (commit B or C) is picked. -# It should have one of those two, which comes out -# to seven lines. -test_expect_success 'diff with two merge bases' ' - git diff br1...master >tmp 2>err && - test_line_count = 7 tmp && - test_line_count = 1 err -' - -test_expect_success 'diff with no merge bases' ' - test_must_fail git diff br2...br3 >tmp 2>err && - test_i18ngrep "fatal: br2...br3: no merge base" err -' - -test_expect_success 'diff with too many symmetric differences' ' - test_must_fail git diff br1...master br2...br3 >tmp 2>err && - test_i18ngrep "usage" err -' - -test_expect_success 'diff with symmetric difference and extraneous arg' ' - test_must_fail git diff master br1...master >tmp 2>err && - test_i18ngrep "usage" err -' - -test_expect_success 'diff with two ranges' ' - test_must_fail git diff master br1..master br2..br3 >tmp 2>err && - test_i18ngrep "usage" err -' - -test_expect_success 'diff with ranges and extra arg' ' - test_must_fail git diff master br1..master commit-D >tmp 2>err && - test_i18ngrep "usage" err -' - -test_done diff --git a/t/t4114-apply-typechange.sh b/t/t4114-apply-typechange.sh index ebadbc347f..da3e64f811 100755 --- a/t/t4114-apply-typechange.sh +++ b/t/t4114-apply-typechange.sh @@ -88,6 +88,13 @@ test_expect_success 'symlink becomes file' ' ' test_debug 'cat patch' +test_expect_success 'symlink becomes file, in reverse' ' + git checkout -f foo-symlinked-to-bar && + git diff-tree -p HEAD foo-back-to-file > patch && + git checkout foo-back-to-file && + git apply -R --index < patch + ' + test_expect_success 'binary file becomes symlink' ' git checkout -f foo-becomes-binary && git diff-tree -p --binary HEAD foo-symlinked-to-bar > patch && diff --git a/t/t4127-apply-same-fn.sh b/t/t4127-apply-same-fn.sh index 972946c174..305b7e649e 100755 --- a/t/t4127-apply-same-fn.sh +++ b/t/t4127-apply-same-fn.sh @@ -32,6 +32,10 @@ test_expect_success 'apply same filename with independent changes' ' test_expect_success 'apply same filename with overlapping changes' ' git reset --hard && + + # Store same_fn so that we can check apply -R in next test + cp same_fn same_fn1 && + modify "s/^d/z/" same_fn && git diff > patch0 && git add same_fn && @@ -43,6 +47,11 @@ test_expect_success 'apply same filename with overlapping changes' ' test_cmp same_fn same_fn2 ' +test_expect_success 'apply same filename with overlapping changes, in reverse' ' + git apply -R patch0 && + test_cmp same_fn same_fn1 +' + test_expect_success 'apply same new filename after rename' ' git reset --hard && git mv same_fn new_fn && diff --git a/t/t5319-multi-pack-index.sh b/t/t5319-multi-pack-index.sh index f340b376bc..ace469c95c 100755 --- a/t/t5319-multi-pack-index.sh +++ b/t/t5319-multi-pack-index.sh @@ -3,6 +3,7 @@ test_description='multi-pack-indexes' . ./test-lib.sh +GIT_TEST_MULTI_PACK_INDEX=0 objdir=.git/objects HASH_LEN=$(test_oid rawsz) @@ -173,12 +174,12 @@ test_expect_success 'write progress off for redirected stderr' ' ' test_expect_success 'write force progress on for stderr' ' - git multi-pack-index --object-dir=$objdir --progress write 2>err && + GIT_PROGRESS_DELAY=0 git multi-pack-index --object-dir=$objdir --progress write 2>err && test_file_not_empty err ' test_expect_success 'write with the --no-progress option' ' - git multi-pack-index --object-dir=$objdir --no-progress write 2>err && + GIT_PROGRESS_DELAY=0 git multi-pack-index --object-dir=$objdir --no-progress write 2>err && test_line_count = 0 err ' @@ -368,17 +369,17 @@ test_expect_success 'git-fsck incorrect offset' ' ' test_expect_success 'repack progress off for redirected stderr' ' - git multi-pack-index --object-dir=$objdir repack 2>err && + GIT_PROGRESS_DELAY=0 git multi-pack-index --object-dir=$objdir repack 2>err && test_line_count = 0 err ' test_expect_success 'repack force progress on for stderr' ' - git multi-pack-index --object-dir=$objdir --progress repack 2>err && + GIT_PROGRESS_DELAY=0 git multi-pack-index --object-dir=$objdir --progress repack 2>err && test_file_not_empty err ' test_expect_success 'repack with the --no-progress option' ' - git multi-pack-index --object-dir=$objdir --no-progress repack 2>err && + GIT_PROGRESS_DELAY=0 git multi-pack-index --object-dir=$objdir --no-progress repack 2>err && test_line_count = 0 err ' @@ -562,7 +563,7 @@ test_expect_success 'expire progress off for redirected stderr' ' test_expect_success 'expire force progress on for stderr' ' ( cd dup && - git multi-pack-index --progress expire 2>err && + GIT_PROGRESS_DELAY=0 git multi-pack-index --progress expire 2>err && test_file_not_empty err ) ' @@ -570,7 +571,7 @@ test_expect_success 'expire force progress on for stderr' ' test_expect_success 'expire with the --no-progress option' ' ( cd dup && - git multi-pack-index --no-progress expire 2>err && + GIT_PROGRESS_DELAY=0 git multi-pack-index --no-progress expire 2>err && test_line_count = 0 err ) ' diff --git a/t/t5324-split-commit-graph.sh b/t/t5324-split-commit-graph.sh index c334ee9155..4d3842b83b 100755 --- a/t/t5324-split-commit-graph.sh +++ b/t/t5324-split-commit-graph.sh @@ -440,4 +440,17 @@ test_expect_success '--split=replace with partial Bloom data' ' verify_chain_files_exist $graphdir ' +test_expect_success 'prevent regression for duplicate commits across layers' ' + git init dup && + git -C dup commit --allow-empty -m one && + git -C dup -c core.commitGraph=false commit-graph write --split=no-merge --reachable 2>err && + test_i18ngrep "attempting to write a commit-graph" err && + git -C dup commit-graph write --split=no-merge --reachable && + git -C dup commit --allow-empty -m two && + git -C dup commit-graph write --split=no-merge --reachable && + git -C dup commit --allow-empty -m three && + git -C dup commit-graph write --split --reachable && + git -C dup commit-graph verify +' + test_done diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index 8d62edd98b..1156f52069 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -179,6 +179,13 @@ test_expect_success 'rename errors out early when deleting non-existent branch' ) ' +test_expect_success 'rename errors out early when when new name is invalid' ' + test_config remote.foo.vcs bar && + echo "fatal: '\''invalid...name'\'' is not a valid remote name" >expect && + test_must_fail git remote rename foo invalid...name 2>actual && + test_i18ncmp expect actual +' + test_expect_success 'add existing foreign_vcs remote' ' test_config remote.foo.vcs bar && echo "fatal: remote foo already exists." >expect && @@ -194,6 +201,12 @@ test_expect_success 'add existing foreign_vcs remote' ' test_i18ncmp expect actual ' +test_expect_success 'add invalid foreign_vcs remote' ' + echo "fatal: '\''invalid...name'\'' is not a valid remote name" >expect && + test_must_fail git remote add invalid...name bar 2>actual && + test_i18ncmp expect actual +' + cat >test/expect <<EOF * remote origin Fetch URL: $(pwd)/one diff --git a/t/t5533-push-cas.sh b/t/t5533-push-cas.sh index 0b0eb1d025..7813e8470e 100755 --- a/t/t5533-push-cas.sh +++ b/t/t5533-push-cas.sh @@ -13,6 +13,46 @@ setup_srcdst_basic () { ) } +# For tests with "--force-if-includes". +setup_src_dup_dst () { + rm -fr src dup dst && + git init --bare dst && + git clone --no-local dst src && + git clone --no-local dst dup + ( + cd src && + test_commit A && + test_commit B && + test_commit C && + git push origin + ) && + ( + cd dup && + git fetch && + git merge origin/master && + git switch -c branch master~2 && + test_commit D && + test_commit E && + git push origin --all + ) && + ( + cd src && + git switch master && + git fetch --all && + git branch branch --track origin/branch && + git rebase origin/master + ) && + ( + cd dup && + git switch master && + test_commit F && + test_commit G && + git switch branch && + test_commit H && + git push origin --all + ) +} + test_expect_success setup ' # create template repository test_commit A && @@ -256,4 +296,101 @@ test_expect_success 'background updates of REMOTE can be mitigated with a non-up ) ' +test_expect_success 'background updates to remote can be mitigated with "--force-if-includes"' ' + setup_src_dup_dst && + test_when_finished "rm -fr dst src dup" && + git ls-remote dst refs/heads/master >expect.master && + git ls-remote dst refs/heads/branch >expect.branch && + ( + cd src && + git switch branch && + test_commit I && + git switch master && + test_commit J && + git fetch --all && + test_must_fail git push --force-with-lease --force-if-includes --all + ) && + git ls-remote dst refs/heads/master >actual.master && + git ls-remote dst refs/heads/branch >actual.branch && + test_cmp expect.master actual.master && + test_cmp expect.branch actual.branch +' + +test_expect_success 'background updates to remote can be mitigated with "push.useForceIfIncludes"' ' + setup_src_dup_dst && + test_when_finished "rm -fr dst src dup" && + git ls-remote dst refs/heads/master >expect.master && + ( + cd src && + git switch branch && + test_commit I && + git switch master && + test_commit J && + git fetch --all && + git config --local push.useForceIfIncludes true && + test_must_fail git push --force-with-lease=master origin master + ) && + git ls-remote dst refs/heads/master >actual.master && + test_cmp expect.master actual.master +' + +test_expect_success '"--force-if-includes" should be disabled for --force-with-lease="<refname>:<expect>"' ' + setup_src_dup_dst && + test_when_finished "rm -fr dst src dup" && + git ls-remote dst refs/heads/master >expect.master && + ( + cd src && + git switch branch && + test_commit I && + git switch master && + test_commit J && + remote_head="$(git rev-parse refs/remotes/origin/master)" && + git fetch --all && + test_must_fail git push --force-if-includes --force-with-lease="master:$remote_head" 2>err && + grep "stale info" err + ) && + git ls-remote dst refs/heads/master >actual.master && + test_cmp expect.master actual.master +' + +test_expect_success '"--force-if-includes" should allow forced update after a rebase ("pull --rebase")' ' + setup_src_dup_dst && + test_when_finished "rm -fr dst src dup" && + ( + cd src && + git switch branch && + test_commit I && + git switch master && + test_commit J && + git pull --rebase origin master && + git push --force-if-includes --force-with-lease="master" + ) +' + +test_expect_success '"--force-if-includes" should allow forced update after a rebase ("pull --rebase", local rebase)' ' + setup_src_dup_dst && + test_when_finished "rm -fr dst src dup" && + ( + cd src && + git switch branch && + test_commit I && + git switch master && + test_commit J && + git pull --rebase origin master && + git rebase --onto HEAD~4 HEAD~1 && + git push --force-if-includes --force-with-lease="master" + ) +' + +test_expect_success '"--force-if-includes" should allow deletes' ' + setup_src_dup_dst && + test_when_finished "rm -fr dst src dup" && + ( + cd src && + git switch branch && + git pull --rebase origin branch && + git push --force-if-includes --force-with-lease="branch" origin :branch + ) +' + test_done diff --git a/t/t5606-clone-options.sh b/t/t5606-clone-options.sh index e69427f881..5e201e7d85 100755 --- a/t/t5606-clone-options.sh +++ b/t/t5606-clone-options.sh @@ -15,7 +15,73 @@ test_expect_success 'setup' ' test_expect_success 'clone -o' ' git clone -o foo parent clone-o && - (cd clone-o && git rev-parse --verify refs/remotes/foo/master) + git -C clone-o rev-parse --verify refs/remotes/foo/master + +' + +test_expect_success 'rejects invalid -o/--origin' ' + + test_must_fail git clone -o "bad...name" parent clone-bad-name 2>err && + test_i18ngrep "'\''bad...name'\'' is not a valid remote name" err + +' + +test_expect_success 'disallows --bare with --origin' ' + + test_must_fail git clone -o foo --bare parent clone-bare-o 2>err && + test_debug "cat err" && + test_i18ngrep -e "--bare and --origin foo options are incompatible" err + +' + +test_expect_success 'disallows --bare with --separate-git-dir' ' + + test_must_fail git clone --bare --separate-git-dir dot-git-destiation parent clone-bare-sgd 2>err && + test_debug "cat err" && + test_i18ngrep -e "--bare and --separate-git-dir are incompatible" err + +' + +test_expect_success 'uses "origin" for default remote name' ' + + git clone parent clone-default-origin && + git -C clone-default-origin rev-parse --verify refs/remotes/origin/master + +' + +test_expect_success 'prefers --template config over normal config' ' + + template="$TRASH_DIRECTORY/template-with-config" && + mkdir "$template" && + git config --file "$template/config" foo.bar from_template && + test_config_global foo.bar from_global && + git clone "--template=$template" parent clone-template-config && + test "$(git -C clone-template-config config --local foo.bar)" = "from_template" + +' + +test_expect_success 'prefers -c config over --template config' ' + + template="$TRASH_DIRECTORY/template-with-ignored-config" && + mkdir "$template" && + git config --file "$template/config" foo.bar from_template && + git clone "--template=$template" -c foo.bar=inline parent clone-template-inline-config && + test "$(git -C clone-template-inline-config config --local foo.bar)" = "inline" + +' + +test_expect_success 'prefers config "clone.defaultRemoteName" over default' ' + + test_config_global clone.defaultRemoteName from_config && + git clone parent clone-config-origin && + git -C clone-config-origin rev-parse --verify refs/remotes/from_config/master + +' + +test_expect_success 'prefers --origin over -c config' ' + + git clone -c clone.defaultRemoteName=inline --origin from_option parent clone-o-and-inline-config && + git -C clone-o-and-inline-config rev-parse --verify refs/remotes/from_option/master ' diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index bc95da8a5f..99a1eaf332 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -339,7 +339,7 @@ commit $head1 .. (hinzugef${added_utf8_part_iso88591}gt) foo EOF -test_expect_success 'prepare expected messages (for test %b)' ' +test_expect_success 'setup expected messages (for test %b)' ' cat <<-EOF >expected.utf-8 && commit $head3 This commit message is much longer than the others, diff --git a/t/t6012-rev-list-simplify.sh b/t/t6012-rev-list-simplify.sh index 7fc10f8593..fd202fcb94 100755 --- a/t/t6012-rev-list-simplify.sh +++ b/t/t6012-rev-list-simplify.sh @@ -168,7 +168,7 @@ test_expect_success '--full-diff is not affected by --parents' ' # # This example is explained in Documentation/rev-list-options.txt -test_expect_success 'rebuild repo' ' +test_expect_success 'setup rebuild repo' ' rm -rf .git * && git init && git switch -c topic && diff --git a/t/t7101-reset-empty-subdirs.sh b/t/t7101-reset-empty-subdirs.sh index 96e163f084..bfce05ac5d 100755 --- a/t/t7101-reset-empty-subdirs.sh +++ b/t/t7101-reset-empty-subdirs.sh @@ -6,16 +6,15 @@ test_description='git reset should cull empty subdirs' . ./test-lib.sh -test_expect_success \ - 'creating initial files' \ - 'mkdir path0 && +test_expect_success 'creating initial files' ' + mkdir path0 && cp "$TEST_DIRECTORY"/../COPYING path0/COPYING && git add path0/COPYING && - git commit -m add -a' + git commit -m add -a +' -test_expect_success \ - 'creating second files' \ - 'mkdir path1 && +test_expect_success 'creating second files' ' + mkdir path1 && mkdir path1/path2 && cp "$TEST_DIRECTORY"/../COPYING path1/path2/COPYING && cp "$TEST_DIRECTORY"/../COPYING path1/COPYING && @@ -25,39 +24,40 @@ test_expect_success \ git add path1/COPYING && git add COPYING && git add path0/COPYING-TOO && - git commit -m change -a' + git commit -m change -a +' -test_expect_success \ - 'resetting tree HEAD^' \ - 'git reset --hard HEAD^' +test_expect_success 'resetting tree HEAD^' ' + git reset --hard HEAD^ +' -test_expect_success \ - 'checking initial files exist after rewind' \ - 'test -d path0 && - test -f path0/COPYING' +test_expect_success 'checking initial files exist after rewind' ' + test -d path0 && + test -f path0/COPYING +' -test_expect_success \ - 'checking lack of path1/path2/COPYING' \ - '! test -f path1/path2/COPYING' +test_expect_success 'checking lack of path1/path2/COPYING' ' + ! test -f path1/path2/COPYING +' -test_expect_success \ - 'checking lack of path1/COPYING' \ - '! test -f path1/COPYING' +test_expect_success 'checking lack of path1/COPYING' ' + ! test -f path1/COPYING +' -test_expect_success \ - 'checking lack of COPYING' \ - '! test -f COPYING' +test_expect_success 'checking lack of COPYING' ' + ! test -f COPYING +' -test_expect_success \ - 'checking checking lack of path1/COPYING-TOO' \ - '! test -f path0/COPYING-TOO' +test_expect_success 'checking checking lack of path1/COPYING-TOO' ' + ! test -f path0/COPYING-TOO +' -test_expect_success \ - 'checking lack of path1/path2' \ - '! test -d path1/path2' +test_expect_success 'checking lack of path1/path2' ' + ! test -d path1/path2 +' -test_expect_success \ - 'checking lack of path1' \ - '! test -d path1' +test_expect_success 'checking lack of path1' ' + ! test -d path1 +' test_done diff --git a/t/t7102-reset.sh b/t/t7102-reset.sh index 22161b3b2d..b1affb001f 100755 --- a/t/t7102-reset.sh +++ b/t/t7102-reset.sh @@ -70,27 +70,27 @@ check_changes () { test_expect_success 'reset --hard message' ' hex=$(git log -1 --format="%h") && - git reset --hard > .actual && - echo HEAD is now at $hex $(commit_msg) > .expected && + git reset --hard >.actual && + echo HEAD is now at $hex $(commit_msg) >.expected && test_i18ncmp .expected .actual ' test_expect_success 'reset --hard message (ISO8859-1 logoutputencoding)' ' hex=$(git log -1 --format="%h") && - git -c "i18n.logOutputEncoding=$test_encoding" reset --hard > .actual && - echo HEAD is now at $hex $(commit_msg $test_encoding) > .expected && + git -c "i18n.logOutputEncoding=$test_encoding" reset --hard >.actual && + echo HEAD is now at $hex $(commit_msg $test_encoding) >.expected && test_i18ncmp .expected .actual ' ->.diff_expect ->.cached_expect -cat >.cat_expect <<EOF -secondfile: -1st line 2nd file -2nd line 2nd file -EOF - test_expect_success 'giving a non existing revision should fail' ' + >.diff_expect && + >.cached_expect && + cat >.cat_expect <<-\EOF && + secondfile: + 1st line 2nd file + 2nd line 2nd file + EOF + test_must_fail git reset aaaaaa && test_must_fail git reset --mixed aaaaaa && test_must_fail git reset --soft aaaaaa && @@ -107,8 +107,7 @@ test_expect_success 'reset --soft with unmerged index should fail' ' git rm --cached -- un ' -test_expect_success \ - 'giving paths with options different than --mixed should fail' ' +test_expect_success 'giving paths with options different than --mixed should fail' ' test_must_fail git reset --soft -- first && test_must_fail git reset --hard -- first && test_must_fail git reset --soft HEAD^ -- first && @@ -128,8 +127,7 @@ test_expect_success 'giving unrecognized options should fail' ' check_changes $head5 ' -test_expect_success \ - 'trying to do reset --soft with pending merge should fail' ' +test_expect_success 'trying to do reset --soft with pending merge should fail' ' git branch branch1 && git branch branch2 && @@ -152,8 +150,7 @@ test_expect_success \ check_changes $head5 ' -test_expect_success \ - 'trying to do reset --soft with pending checkout merge should fail' ' +test_expect_success 'trying to do reset --soft with pending checkout merge should fail' ' git branch branch3 && git branch branch4 && @@ -175,8 +172,7 @@ test_expect_success \ check_changes $head5 ' -test_expect_success \ - 'resetting to HEAD with no changes should succeed and do nothing' ' +test_expect_success 'resetting to HEAD with no changes should succeed and do nothing' ' git reset --hard && check_changes $head5 && git reset --hard HEAD && @@ -195,39 +191,38 @@ test_expect_success \ check_changes $head5 ' ->.diff_expect -cat >.cached_expect <<EOF -diff --git a/secondfile b/secondfile -index $head5p1s..$head5s 100644 ---- a/secondfile -+++ b/secondfile -@@ -1 +1,2 @@ --2nd file -+1st line 2nd file -+2nd line 2nd file -EOF -cat >.cat_expect <<EOF -secondfile: -1st line 2nd file -2nd line 2nd file -EOF test_expect_success '--soft reset only should show changes in diff --cached' ' + >.diff_expect && + cat >.cached_expect <<-EOF && + diff --git a/secondfile b/secondfile + index $head5p1s..$head5s 100644 + --- a/secondfile + +++ b/secondfile + @@ -1 +1,2 @@ + -2nd file + +1st line 2nd file + +2nd line 2nd file + EOF + cat >.cat_expect <<-\EOF && + secondfile: + 1st line 2nd file + 2nd line 2nd file + EOF git reset --soft HEAD^ && check_changes $head5p1 && test "$(git rev-parse ORIG_HEAD)" = \ $head5 ' ->.diff_expect ->.cached_expect -cat >.cat_expect <<EOF -secondfile: -1st line 2nd file -2nd line 2nd file -3rd line 2nd file -EOF -test_expect_success \ - 'changing files and redo the last commit should succeed' ' +test_expect_success 'changing files and redo the last commit should succeed' ' + >.diff_expect && + >.cached_expect && + cat >.cat_expect <<-\EOF && + secondfile: + 1st line 2nd file + 2nd line 2nd file + 3rd line 2nd file + EOF echo "3rd line 2nd file" >>secondfile && git commit -a -C ORIG_HEAD && head4=$(git rev-parse --verify HEAD) && @@ -236,56 +231,54 @@ test_expect_success \ $head5 ' ->.diff_expect ->.cached_expect -cat >.cat_expect <<EOF -first: -1st file -2nd line 1st file -second: -2nd file -EOF -test_expect_success \ - '--hard reset should change the files and undo commits permanently' ' +test_expect_success '--hard reset should change the files and undo commits permanently' ' + >.diff_expect && + >.cached_expect && + cat >.cat_expect <<-\EOF && + first: + 1st file + 2nd line 1st file + second: + 2nd file + EOF git reset --hard HEAD~2 && check_changes $head5p2 && test "$(git rev-parse ORIG_HEAD)" = \ $head4 ' ->.diff_expect -cat >.cached_expect <<EOF -diff --git a/first b/first -deleted file mode 100644 -index $head5p2f..0000000 ---- a/first -+++ /dev/null -@@ -1,2 +0,0 @@ --1st file --2nd line 1st file -diff --git a/second b/second -deleted file mode 100644 -index $head5p1s..0000000 ---- a/second -+++ /dev/null -@@ -1 +0,0 @@ --2nd file -diff --git a/secondfile b/secondfile -new file mode 100644 -index 0000000..$head5s ---- /dev/null -+++ b/secondfile -@@ -0,0 +1,2 @@ -+1st line 2nd file -+2nd line 2nd file -EOF -cat >.cat_expect <<EOF -secondfile: -1st line 2nd file -2nd line 2nd file -EOF -test_expect_success \ - 'redoing changes adding them without commit them should succeed' ' +test_expect_success 'redoing changes adding them without commit them should succeed' ' + >.diff_expect && + cat >.cached_expect <<-EOF && + diff --git a/first b/first + deleted file mode 100644 + index $head5p2f..0000000 + --- a/first + +++ /dev/null + @@ -1,2 +0,0 @@ + -1st file + -2nd line 1st file + diff --git a/second b/second + deleted file mode 100644 + index $head5p1s..0000000 + --- a/second + +++ /dev/null + @@ -1 +0,0 @@ + -2nd file + diff --git a/secondfile b/secondfile + new file mode 100644 + index 0000000..$head5s + --- /dev/null + +++ b/secondfile + @@ -0,0 +1,2 @@ + +1st line 2nd file + +2nd line 2nd file + EOF + cat >.cat_expect <<-\EOF && + secondfile: + 1st line 2nd file + 2nd line 2nd file + EOF git rm first && git mv second secondfile && @@ -295,46 +288,45 @@ test_expect_success \ check_changes $head5p2 ' -cat >.diff_expect <<EOF -diff --git a/first b/first -deleted file mode 100644 -index $head5p2f..0000000 ---- a/first -+++ /dev/null -@@ -1,2 +0,0 @@ --1st file --2nd line 1st file -diff --git a/second b/second -deleted file mode 100644 -index $head5p1s..0000000 ---- a/second -+++ /dev/null -@@ -1 +0,0 @@ --2nd file -EOF ->.cached_expect -cat >.cat_expect <<EOF -secondfile: -1st line 2nd file -2nd line 2nd file -EOF test_expect_success '--mixed reset to HEAD should unadd the files' ' + cat >.diff_expect <<-EOF && + diff --git a/first b/first + deleted file mode 100644 + index $head5p2f..0000000 + --- a/first + +++ /dev/null + @@ -1,2 +0,0 @@ + -1st file + -2nd line 1st file + diff --git a/second b/second + deleted file mode 100644 + index $head5p1s..0000000 + --- a/second + +++ /dev/null + @@ -1 +0,0 @@ + -2nd file + EOF + >.cached_expect && + cat >.cat_expect <<-\EOF && + secondfile: + 1st line 2nd file + 2nd line 2nd file + EOF git reset && check_changes $head5p2 && test "$(git rev-parse ORIG_HEAD)" = $head5p2 ' ->.diff_expect ->.cached_expect -cat >.cat_expect <<EOF -secondfile: -1st line 2nd file -2nd line 2nd file -EOF test_expect_success 'redoing the last two commits should succeed' ' + >.diff_expect && + >.cached_expect && + cat >.cat_expect <<-\EOF && + secondfile: + 1st line 2nd file + 2nd line 2nd file + EOF git add secondfile && git reset --hard $head5p2 && - git rm first && git mv second secondfile && git commit -a -m "remove 1st and rename 2nd" && @@ -347,15 +339,15 @@ test_expect_success 'redoing the last two commits should succeed' ' check_changes $head5 ' ->.diff_expect ->.cached_expect -cat >.cat_expect <<EOF -secondfile: -1st line 2nd file -2nd line 2nd file -3rd line in branch2 -EOF test_expect_success '--hard reset to HEAD should clear a failed merge' ' + >.diff_expect && + >.cached_expect && + cat >.cat_expect <<-\EOF && + secondfile: + 1st line 2nd file + 2nd line 2nd file + 3rd line in branch2 + EOF git branch branch1 && git branch branch2 && @@ -373,15 +365,14 @@ test_expect_success '--hard reset to HEAD should clear a failed merge' ' check_changes $head3 ' ->.diff_expect ->.cached_expect -cat >.cat_expect <<EOF -secondfile: -1st line 2nd file -2nd line 2nd file -EOF -test_expect_success \ - '--hard reset to ORIG_HEAD should clear a fast-forward merge' ' +test_expect_success '--hard reset to ORIG_HEAD should clear a fast-forward merge' ' + >.diff_expect && + >.cached_expect && + cat >.cat_expect <<-\EOF && + secondfile: + 1st line 2nd file + 2nd line 2nd file + EOF git reset --hard HEAD^ && check_changes $head5 && @@ -395,25 +386,25 @@ test_expect_success \ ' test_expect_success 'test --mixed <paths>' ' - echo 1 > file1 && - echo 2 > file2 && + echo 1 >file1 && + echo 2 >file2 && git add file1 file2 && test_tick && git commit -m files && before1=$(git rev-parse --short HEAD:file1) && before2=$(git rev-parse --short HEAD:file2) && git rm file2 && - echo 3 > file3 && - echo 4 > file4 && - echo 5 > file1 && + echo 3 >file3 && + echo 4 >file4 && + echo 5 >file1 && after1=$(git rev-parse --short $(git hash-object file1)) && after4=$(git rev-parse --short $(git hash-object file4)) && git add file1 file3 file4 && git reset HEAD -- file1 file2 file3 && test_must_fail git diff --quiet && - git diff > output && + git diff >output && - cat > expect <<-EOF && + cat >expect <<-EOF && diff --git a/file1 b/file1 index $before1..$after1 100644 --- a/file1 @@ -431,9 +422,9 @@ test_expect_success 'test --mixed <paths>' ' EOF test_cmp expect output && - git diff --cached > output && + git diff --cached >output && - cat > cached_expect <<-EOF && + cat >cached_expect <<-EOF && diff --git a/file4 b/file4 new file mode 100644 index 0000000..$after4 @@ -447,7 +438,6 @@ test_expect_success 'test --mixed <paths>' ' ' test_expect_success 'test resetting the index at give paths' ' - mkdir sub && >sub/file1 && >sub/file2 && @@ -460,7 +450,6 @@ test_expect_success 'test resetting the index at give paths' ' echo "$U" && test_must_fail git diff-index --cached --exit-code "$T" && test "$T" != "$U" - ' test_expect_success 'resetting an unmodified path is a no-op' ' @@ -470,14 +459,13 @@ test_expect_success 'resetting an unmodified path is a no-op' ' git diff-index --cached --exit-code HEAD ' -cat > expect << EOF -Unstaged changes after reset: -M file2 -EOF - test_expect_success '--mixed refreshes the index' ' - echo 123 >> file2 && - git reset --mixed HEAD > output && + cat >expect <<-\EOF && + Unstaged changes after reset: + M file2 + EOF + echo 123 >>file2 && + git reset --mixed HEAD >output && test_i18ncmp expect output ' @@ -498,7 +486,6 @@ test_expect_success 'resetting specific path that is unmerged' ' ' test_expect_success 'disambiguation (1)' ' - git reset --hard && >secondfile && git add secondfile && @@ -507,11 +494,9 @@ test_expect_success 'disambiguation (1)' ' test -z "$(git diff --cached --name-only)" && test -f secondfile && test_must_be_empty secondfile - ' test_expect_success 'disambiguation (2)' ' - git reset --hard && >secondfile && git add secondfile && @@ -519,11 +504,9 @@ test_expect_success 'disambiguation (2)' ' test_must_fail git reset secondfile && test -n "$(git diff --cached --name-only -- secondfile)" && test ! -f secondfile - ' test_expect_success 'disambiguation (3)' ' - git reset --hard && >secondfile && git add secondfile && @@ -532,11 +515,9 @@ test_expect_success 'disambiguation (3)' ' test_must_fail git diff --quiet && test -z "$(git diff --cached --name-only)" && test ! -f secondfile - ' test_expect_success 'disambiguation (4)' ' - git reset --hard && >secondfile && git add secondfile && diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 4d62b9b00f..b36a93056f 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -33,8 +33,7 @@ fill () { test_expect_success setup ' - - fill x y z > same && + fill x y z >same && fill 1 2 3 4 5 6 7 8 >one && fill a b c d e >two && git add same one two && @@ -56,14 +55,13 @@ test_expect_success setup ' git checkout -b simple master && rm -f one && - fill a c e > two && + fill a c e >two && git commit -a -m "Simple D one, M two" && git checkout master ' -test_expect_success "checkout from non-existing branch" ' - +test_expect_success 'checkout from non-existing branch' ' git checkout -b delete-me master && git update-ref -d --no-deref refs/heads/delete-me && test refs/heads/delete-me = "$(git symbolic-ref HEAD)" && @@ -71,8 +69,7 @@ test_expect_success "checkout from non-existing branch" ' test refs/heads/master = "$(git symbolic-ref HEAD)" ' -test_expect_success "checkout with dirty tree without -m" ' - +test_expect_success 'checkout with dirty tree without -m' ' fill 0 1 2 3 4 5 6 7 8 >one && if git checkout side then @@ -81,11 +78,9 @@ test_expect_success "checkout with dirty tree without -m" ' else echo "happy - failed correctly" fi - ' -test_expect_success "checkout with unrelated dirty tree without -m" ' - +test_expect_success 'checkout with unrelated dirty tree without -m' ' git checkout -f master && fill 0 1 2 3 4 5 6 7 8 >same && cp same kept && @@ -95,13 +90,12 @@ test_expect_success "checkout with unrelated dirty tree without -m" ' test_cmp messages.expect messages ' -test_expect_success "checkout -m with dirty tree" ' - +test_expect_success 'checkout -m with dirty tree' ' git checkout -f master && git clean -f && fill 0 1 2 3 4 5 6 7 8 >one && - git checkout -m side > messages && + git checkout -m side >messages && test "$(git symbolic-ref HEAD)" = "refs/heads/side" && @@ -120,8 +114,7 @@ test_expect_success "checkout -m with dirty tree" ' test_must_be_empty current.index ' -test_expect_success "checkout -m with dirty tree, renamed" ' - +test_expect_success 'checkout -m with dirty tree, renamed' ' git checkout -f master && git clean -f && fill 1 2 3 4 5 7 8 >one && @@ -139,11 +132,9 @@ test_expect_success "checkout -m with dirty tree, renamed" ' ! test -f one && git diff --cached >current && test_must_be_empty current - ' test_expect_success 'checkout -m with merge conflict' ' - git checkout -f master && git clean -f && fill 1 T 3 4 5 6 S 8 >one && @@ -166,10 +157,10 @@ test_expect_success 'checkout -m with merge conflict' ' ' test_expect_success 'format of merge conflict from checkout -m' ' + git checkout -f master && + git clean -f && - git checkout -f master && git clean -f && - - fill b d > two && + fill b d >two && git checkout -m simple && git ls-files >current && @@ -190,10 +181,11 @@ test_expect_success 'format of merge conflict from checkout -m' ' ' test_expect_success 'checkout --merge --conflict=diff3 <branch>' ' + git checkout -f master && + git reset --hard && + git clean -f && - git checkout -f master && git reset --hard && git clean -f && - - fill b d > two && + fill b d >two && git checkout --merge --conflict=diff3 simple && cat <<-EOF >expect && @@ -216,8 +208,9 @@ test_expect_success 'checkout --merge --conflict=diff3 <branch>' ' ' test_expect_success 'switch to another branch while carrying a deletion' ' - - git checkout -f master && git reset --hard && git clean -f && + git checkout -f master && + git reset --hard && + git clean -f && git rm two && test_must_fail git checkout simple 2>errs && @@ -228,10 +221,10 @@ test_expect_success 'switch to another branch while carrying a deletion' ' ' test_expect_success 'checkout to detach HEAD (with advice declined)' ' - git config advice.detachedHead false && rev=$(git rev-parse --short renamer^) && - git checkout -f renamer && git clean -f && + git checkout -f renamer && + git clean -f && git checkout renamer^ 2>messages && test_i18ngrep "HEAD is now at $rev" messages && test_line_count = 1 messages && @@ -250,7 +243,8 @@ test_expect_success 'checkout to detach HEAD (with advice declined)' ' test_expect_success 'checkout to detach HEAD' ' git config advice.detachedHead true && rev=$(git rev-parse --short renamer^) && - git checkout -f renamer && git clean -f && + git checkout -f renamer && + git clean -f && GIT_TEST_GETTEXT_POISON=false git checkout renamer^ 2>messages && grep "HEAD is now at $rev" messages && test_line_count -gt 1 messages && @@ -267,8 +261,8 @@ test_expect_success 'checkout to detach HEAD' ' ' test_expect_success 'checkout to detach HEAD with branchname^' ' - - git checkout -f master && git clean -f && + git checkout -f master && + git clean -f && git checkout renamer^ && H=$(git rev-parse --verify HEAD) && M=$(git show-ref -s --verify refs/heads/master) && @@ -283,8 +277,8 @@ test_expect_success 'checkout to detach HEAD with branchname^' ' ' test_expect_success 'checkout to detach HEAD with :/message' ' - - git checkout -f master && git clean -f && + git checkout -f master && + git clean -f && git checkout ":/Initial" && H=$(git rev-parse --verify HEAD) && M=$(git show-ref -s --verify refs/heads/master) && @@ -299,8 +293,8 @@ test_expect_success 'checkout to detach HEAD with :/message' ' ' test_expect_success 'checkout to detach HEAD with HEAD^0' ' - - git checkout -f master && git clean -f && + git checkout -f master && + git clean -f && git checkout HEAD^0 && H=$(git rev-parse --verify HEAD) && M=$(git show-ref -s --verify refs/heads/master) && @@ -315,7 +309,6 @@ test_expect_success 'checkout to detach HEAD with HEAD^0' ' ' test_expect_success 'checkout with ambiguous tag/branch names' ' - git tag both side && git branch both master && git reset --hard && @@ -327,11 +320,9 @@ test_expect_success 'checkout with ambiguous tag/branch names' ' test "z$H" = "z$M" && name=$(git symbolic-ref HEAD 2>/dev/null) && test "z$name" = zrefs/heads/both - ' test_expect_success 'checkout with ambiguous tag/branch names' ' - git reset --hard && git checkout master && @@ -351,26 +342,19 @@ test_expect_success 'checkout with ambiguous tag/branch names' ' else : happy fi - ' test_expect_success 'switch branches while in subdirectory' ' - git reset --hard && git checkout master && mkdir subs && - ( - cd subs && - git checkout side - ) && + git -C subs checkout side && ! test -f subs/one && rm -fr subs - ' test_expect_success 'checkout specific path while in subdirectory' ' - git reset --hard && git checkout side && mkdir subs && @@ -380,30 +364,26 @@ test_expect_success 'checkout specific path while in subdirectory' ' git checkout master && mkdir -p subs && - ( - cd subs && - git checkout side -- bero - ) && + git -C subs checkout side -- bero && test -f subs/bero - ' -test_expect_success \ - 'checkout w/--track sets up tracking' ' +test_expect_success 'checkout w/--track sets up tracking' ' git config branch.autosetupmerge false && git checkout master && git checkout --track -b track1 && test "$(git config branch.track1.remote)" && - test "$(git config branch.track1.merge)"' + test "$(git config branch.track1.merge)" +' -test_expect_success \ - 'checkout w/autosetupmerge=always sets up tracking' ' +test_expect_success 'checkout w/autosetupmerge=always sets up tracking' ' test_when_finished git config branch.autosetupmerge false && git config branch.autosetupmerge always && git checkout master && git checkout -b track2 && test "$(git config branch.track2.remote)" && - test "$(git config branch.track2.merge)"' + test "$(git config branch.track2.merge)" +' test_expect_success 'checkout w/--track from non-branch HEAD fails' ' git checkout master^0 && @@ -435,8 +415,7 @@ test_expect_success 'detach a symbolic link HEAD' ' test "z$(git rev-parse --verify refs/heads/master)" = "z$here" ' -test_expect_success \ - 'checkout with --track fakes a sensible -b <name>' ' +test_expect_success 'checkout with --track fakes a sensible -b <name>' ' git config remote.origin.fetch "+refs/heads/*:refs/remotes/origin/*" && git update-ref refs/remotes/origin/koala/bear renamer && @@ -457,9 +436,9 @@ test_expect_success \ test "$(git rev-parse HEAD)" = "$(git rev-parse renamer)" ' -test_expect_success \ - 'checkout with --track, but without -b, fails with too short tracked name' ' - test_must_fail git checkout --track renamer' +test_expect_success 'checkout with --track, but without -b, fails with too short tracked name' ' + test_must_fail git checkout --track renamer +' setup_conflicting_index () { rm -f .git/index && @@ -609,7 +588,6 @@ test_expect_success 'failing checkout -b should not break working tree' ' test $(git symbolic-ref HEAD) = refs/heads/master && git diff --exit-code && git diff --cached --exit-code - ' test_expect_success 'switch out of non-branch' ' diff --git a/t/t7518-ident-corner-cases.sh b/t/t7518-ident-corner-cases.sh index dc3e9c8c88..905957bd0a 100755 --- a/t/t7518-ident-corner-cases.sh +++ b/t/t7518-ident-corner-cases.sh @@ -13,7 +13,7 @@ test_expect_success 'empty name and missing email' ' sane_unset GIT_AUTHOR_EMAIL && GIT_AUTHOR_NAME= && test_must_fail git commit --allow-empty -m foo 2>err && - test_i18ngrep ! null err + test_i18ngrep ! "(null)" err ) ' diff --git a/t/t7900-maintenance.sh b/t/t7900-maintenance.sh index 53c883531e..b2def8bb16 100755 --- a/t/t7900-maintenance.sh +++ b/t/t7900-maintenance.sh @@ -5,6 +5,7 @@ test_description='git maintenance builtin' . ./test-lib.sh GIT_TEST_COMMIT_GRAPH=0 +GIT_TEST_MULTI_PACK_INDEX=0 test_expect_success 'help text' ' test_expect_code 129 git maintenance -h 2>err && @@ -52,6 +53,43 @@ test_expect_success 'run --task=<task>' ' test_subcommand git commit-graph write --split --reachable --no-progress <run-both.txt ' +test_expect_success 'core.commitGraph=false prevents write process' ' + GIT_TRACE2_EVENT="$(pwd)/no-commit-graph.txt" \ + git -c core.commitGraph=false maintenance run \ + --task=commit-graph 2>/dev/null && + test_subcommand ! git commit-graph write --split --reachable --no-progress \ + <no-commit-graph.txt +' + +test_expect_success 'commit-graph auto condition' ' + COMMAND="maintenance run --task=commit-graph --auto --quiet" && + + GIT_TRACE2_EVENT="$(pwd)/cg-no.txt" \ + git -c maintenance.commit-graph.auto=1 $COMMAND && + GIT_TRACE2_EVENT="$(pwd)/cg-negative-means-yes.txt" \ + git -c maintenance.commit-graph.auto="-1" $COMMAND && + + test_commit first && + + GIT_TRACE2_EVENT="$(pwd)/cg-zero-means-no.txt" \ + git -c maintenance.commit-graph.auto=0 $COMMAND && + GIT_TRACE2_EVENT="$(pwd)/cg-one-satisfied.txt" \ + git -c maintenance.commit-graph.auto=1 $COMMAND && + + git commit --allow-empty -m "second" && + git commit --allow-empty -m "third" && + + GIT_TRACE2_EVENT="$(pwd)/cg-two-satisfied.txt" \ + git -c maintenance.commit-graph.auto=2 $COMMAND && + + COMMIT_GRAPH_WRITE="git commit-graph write --split --reachable --no-progress" && + test_subcommand ! $COMMIT_GRAPH_WRITE <cg-no.txt && + test_subcommand $COMMIT_GRAPH_WRITE <cg-negative-means-yes.txt && + test_subcommand ! $COMMIT_GRAPH_WRITE <cg-zero-means-no.txt && + test_subcommand $COMMIT_GRAPH_WRITE <cg-one-satisfied.txt && + test_subcommand $COMMIT_GRAPH_WRITE <cg-two-satisfied.txt +' + test_expect_success 'run --task=bogus' ' test_must_fail git maintenance run --task=bogus 2>err && test_i18ngrep "is not a valid task" err @@ -62,4 +100,188 @@ test_expect_success 'run --task duplicate' ' test_i18ngrep "cannot be selected multiple times" err ' +test_expect_success 'run --task=prefetch with no remotes' ' + git maintenance run --task=prefetch 2>err && + test_must_be_empty err +' + +test_expect_success 'prefetch multiple remotes' ' + git clone . clone1 && + git clone . clone2 && + git remote add remote1 "file://$(pwd)/clone1" && + git remote add remote2 "file://$(pwd)/clone2" && + git -C clone1 switch -c one && + git -C clone2 switch -c two && + test_commit -C clone1 one && + test_commit -C clone2 two && + GIT_TRACE2_EVENT="$(pwd)/run-prefetch.txt" git maintenance run --task=prefetch 2>/dev/null && + fetchargs="--prune --no-tags --no-write-fetch-head --recurse-submodules=no --refmap= --quiet" && + test_subcommand git fetch remote1 $fetchargs +refs/heads/\\*:refs/prefetch/remote1/\\* <run-prefetch.txt && + test_subcommand git fetch remote2 $fetchargs +refs/heads/\\*:refs/prefetch/remote2/\\* <run-prefetch.txt && + test_path_is_missing .git/refs/remotes && + git log prefetch/remote1/one && + git log prefetch/remote2/two && + git fetch --all && + test_cmp_rev refs/remotes/remote1/one refs/prefetch/remote1/one && + test_cmp_rev refs/remotes/remote2/two refs/prefetch/remote2/two +' + +test_expect_success 'loose-objects task' ' + # Repack everything so we know the state of the object dir + git repack -adk && + + # Hack to stop maintenance from running during "git commit" + echo in use >.git/objects/maintenance.lock && + + # Assuming that "git commit" creates at least one loose object + test_commit create-loose-object && + rm .git/objects/maintenance.lock && + + ls .git/objects >obj-dir-before && + test_file_not_empty obj-dir-before && + ls .git/objects/pack/*.pack >packs-before && + test_line_count = 1 packs-before && + + # The first run creates a pack-file + # but does not delete loose objects. + git maintenance run --task=loose-objects && + ls .git/objects >obj-dir-between && + test_cmp obj-dir-before obj-dir-between && + ls .git/objects/pack/*.pack >packs-between && + test_line_count = 2 packs-between && + ls .git/objects/pack/loose-*.pack >loose-packs && + test_line_count = 1 loose-packs && + + # The second run deletes loose objects + # but does not create a pack-file. + git maintenance run --task=loose-objects && + ls .git/objects >obj-dir-after && + cat >expect <<-\EOF && + info + pack + EOF + test_cmp expect obj-dir-after && + ls .git/objects/pack/*.pack >packs-after && + test_cmp packs-between packs-after +' + +test_expect_success 'maintenance.loose-objects.auto' ' + git repack -adk && + GIT_TRACE2_EVENT="$(pwd)/trace-lo1.txt" \ + git -c maintenance.loose-objects.auto=1 maintenance \ + run --auto --task=loose-objects 2>/dev/null && + test_subcommand ! git prune-packed --quiet <trace-lo1.txt && + printf data-A | git hash-object -t blob --stdin -w && + GIT_TRACE2_EVENT="$(pwd)/trace-loA" \ + git -c maintenance.loose-objects.auto=2 \ + maintenance run --auto --task=loose-objects 2>/dev/null && + test_subcommand ! git prune-packed --quiet <trace-loA && + printf data-B | git hash-object -t blob --stdin -w && + GIT_TRACE2_EVENT="$(pwd)/trace-loB" \ + git -c maintenance.loose-objects.auto=2 \ + maintenance run --auto --task=loose-objects 2>/dev/null && + test_subcommand git prune-packed --quiet <trace-loB && + GIT_TRACE2_EVENT="$(pwd)/trace-loC" \ + git -c maintenance.loose-objects.auto=2 \ + maintenance run --auto --task=loose-objects 2>/dev/null && + test_subcommand git prune-packed --quiet <trace-loC +' + +test_expect_success 'incremental-repack task' ' + packDir=.git/objects/pack && + for i in $(test_seq 1 5) + do + test_commit $i || return 1 + done && + + # Create three disjoint pack-files with size BIG, small, small. + echo HEAD~2 | git pack-objects --revs $packDir/test-1 && + test_tick && + git pack-objects --revs $packDir/test-2 <<-\EOF && + HEAD~1 + ^HEAD~2 + EOF + test_tick && + git pack-objects --revs $packDir/test-3 <<-\EOF && + HEAD + ^HEAD~1 + EOF + rm -f $packDir/pack-* && + rm -f $packDir/loose-* && + ls $packDir/*.pack >packs-before && + test_line_count = 3 packs-before && + + # the job repacks the two into a new pack, but does not + # delete the old ones. + git maintenance run --task=incremental-repack && + ls $packDir/*.pack >packs-between && + test_line_count = 4 packs-between && + + # the job deletes the two old packs, and does not write + # a new one because the batch size is not high enough to + # pack the largest pack-file. + git maintenance run --task=incremental-repack && + ls .git/objects/pack/*.pack >packs-after && + test_line_count = 2 packs-after +' + +test_expect_success EXPENSIVE 'incremental-repack 2g limit' ' + for i in $(test_seq 1 5) + do + test-tool genrandom foo$i $((512 * 1024 * 1024 + 1)) >>big || + return 1 + done && + git add big && + git commit -m "Add big file (1)" && + + # ensure any possible loose objects are in a pack-file + git maintenance run --task=loose-objects && + + rm big && + for i in $(test_seq 6 10) + do + test-tool genrandom foo$i $((512 * 1024 * 1024 + 1)) >>big || + return 1 + done && + git add big && + git commit -m "Add big file (2)" && + + # ensure any possible loose objects are in a pack-file + git maintenance run --task=loose-objects && + + # Now run the incremental-repack task and check the batch-size + GIT_TRACE2_EVENT="$(pwd)/run-2g.txt" git maintenance run \ + --task=incremental-repack 2>/dev/null && + test_subcommand git multi-pack-index repack \ + --no-progress --batch-size=2147483647 <run-2g.txt +' + +test_expect_success 'maintenance.incremental-repack.auto' ' + git repack -adk && + git config core.multiPackIndex true && + git multi-pack-index write && + GIT_TRACE2_EVENT="$(pwd)/midx-init.txt" git \ + -c maintenance.incremental-repack.auto=1 \ + maintenance run --auto --task=incremental-repack 2>/dev/null && + test_subcommand ! git multi-pack-index write --no-progress <midx-init.txt && + test_commit A && + git pack-objects --revs .git/objects/pack/pack <<-\EOF && + HEAD + ^HEAD~1 + EOF + GIT_TRACE2_EVENT=$(pwd)/trace-A git \ + -c maintenance.incremental-repack.auto=2 \ + maintenance run --auto --task=incremental-repack 2>/dev/null && + test_subcommand ! git multi-pack-index write --no-progress <trace-A && + test_commit B && + git pack-objects --revs .git/objects/pack/pack <<-\EOF && + HEAD + ^HEAD~1 + EOF + GIT_TRACE2_EVENT=$(pwd)/trace-B git \ + -c maintenance.incremental-repack.auto=2 \ + maintenance run --auto --task=incremental-repack 2>/dev/null && + test_subcommand git multi-pack-index write --no-progress <trace-B +' + test_done diff --git a/t/t9304-fast-import-marks.sh b/t/t9304-fast-import-marks.sh new file mode 100755 index 0000000000..d4359dba21 --- /dev/null +++ b/t/t9304-fast-import-marks.sh @@ -0,0 +1,51 @@ +#!/bin/sh + +test_description='test exotic situations with marks' +. ./test-lib.sh + +test_expect_success 'setup dump of basic history' ' + test_commit one && + git fast-export --export-marks=marks HEAD >dump +' + +test_expect_success 'setup large marks file' ' + # normally a marks file would have a lot of useful, unique + # marks. But for our purposes, just having a lot of nonsense + # ones is fine. Start at 1024 to avoid clashing with marks + # legitimately used in our tiny dump. + blob=$(git rev-parse HEAD:one.t) && + for i in $(test_seq 1024 16384) + do + echo ":$i $blob" + done >>marks +' + +test_expect_success 'import with large marks file' ' + git fast-import --import-marks=marks <dump +' + +test_expect_success 'setup dump with submodule' ' + git submodule add "$PWD" sub && + git commit -m "add submodule" && + git fast-export HEAD >dump +' + +test_expect_success 'setup submodule mapping with large id' ' + old=$(git rev-parse HEAD:sub) && + new=$(echo $old | sed s/./a/g) && + echo ":12345 $old" >from && + echo ":12345 $new" >to +' + +test_expect_success 'import with submodule mapping' ' + git init dst && + git -C dst fast-import \ + --rewrite-submodules-from=sub:../from \ + --rewrite-submodules-to=sub:../to \ + <dump && + git -C dst rev-parse HEAD:sub >actual && + echo "$new" >expect && + test_cmp expect actual +' + +test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 7b7bc6e4bd..eb9e56c39e 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -1360,6 +1360,58 @@ test_expect_success 'git checkout - a later --no-guess overrides previous --gues EOF ' +test_expect_success 'git checkout - with checkout.guess = false, only completes refs' ' + test_config checkout.guess false && + test_completion "git checkout " <<-\EOF + HEAD Z + master Z + matching-branch Z + matching-tag Z + other/branch-in-other Z + other/master-in-other Z + EOF +' + +test_expect_success 'git checkout - with checkout.guess = true, completes refs and unique remote branches for DWIM' ' + test_config checkout.guess true && + test_completion "git checkout " <<-\EOF + HEAD Z + branch-in-other Z + master Z + master-in-other Z + matching-branch Z + matching-tag Z + other/branch-in-other Z + other/master-in-other Z + EOF +' + +test_expect_success 'git checkout - a later --guess overrides previous checkout.guess = false, complete refs and unique remote branches for DWIM' ' + test_config checkout.guess false && + test_completion "git checkout --guess " <<-\EOF + HEAD Z + branch-in-other Z + master Z + master-in-other Z + matching-branch Z + matching-tag Z + other/branch-in-other Z + other/master-in-other Z + EOF +' + +test_expect_success 'git checkout - a later --no-guess overrides previous checkout.guess = true, complete only refs' ' + test_config checkout.guess true && + test_completion "git checkout --no-guess " <<-\EOF + HEAD Z + master Z + matching-branch Z + matching-tag Z + other/branch-in-other Z + other/master-in-other Z + EOF +' + test_expect_success 'git switch - with --detach, complete all references' ' test_completion "git switch --detach " <<-\EOF HEAD Z diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 8d59b90348..4a35bde145 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -952,13 +952,7 @@ test_expect_code () { # - not all diff versions understand "-u" test_cmp() { - test $# -eq 2 || BUG "test_cmp requires two arguments" - if ! eval "$GIT_TEST_CMP" '"$@"' - then - test "x$1" = x- || test -e "$1" || BUG "test_cmp '$1' missing" - test "x$2" = x- || test -e "$2" || BUG "test_cmp '$2' missing" - return 1 - fi + eval "$GIT_TEST_CMP" '"$@"' } # Check that the given config key has the expected value. @@ -987,13 +981,7 @@ test_cmp_config() { # test_cmp_bin - helper to compare binary files test_cmp_bin() { - test $# -eq 2 || BUG "test_cmp_bin requires two arguments" - if ! cmp "$@" - then - test "x$1" = x- || test -e "$1" || BUG "test_cmp_bin '$1' missing" - test "x$2" = x- || test -e "$2" || BUG "test_cmp_bin '$2' missing" - return 1 - fi + cmp "$@" } # Use this instead of test_cmp to compare files that contain expected and diff --git a/t/test-lib.sh b/t/test-lib.sh index ef31f40037..f68bca745a 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -769,15 +769,17 @@ match_pattern_list () { } match_test_selector_list () { + operation="$1" + shift title="$1" shift arg="$1" shift test -z "$1" && return 0 - # Both commas and whitespace are accepted as separators. + # Commas are accepted as separators. OLDIFS=$IFS - IFS=' ,' + IFS=',' set -- $1 IFS=$OLDIFS @@ -805,13 +807,13 @@ match_test_selector_list () { *-*) if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null then - echo "error: $title: invalid non-numeric in range" \ + echo "error: $operation: invalid non-numeric in range" \ "start: '$orig_selector'" >&2 exit 1 fi if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null then - echo "error: $title: invalid non-numeric in range" \ + echo "error: $operation: invalid non-numeric in range" \ "end: '$orig_selector'" >&2 exit 1 fi @@ -819,9 +821,11 @@ match_test_selector_list () { *) if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null then - echo "error: $title: invalid non-numeric in test" \ - "selector: '$orig_selector'" >&2 - exit 1 + case "$title" in *${selector}*) + include=$positive + ;; + esac + continue fi esac @@ -1031,7 +1035,7 @@ test_skip () { skipped_reason="GIT_SKIP_TESTS" fi if test -z "$to_skip" && test -n "$run_list" && - ! match_test_selector_list '--run' $test_count "$run_list" + ! match_test_selector_list '--run' "$1" $test_count "$run_list" then to_skip=t skipped_reason="--run" @@ -1058,7 +1062,6 @@ test_skip () { " <skipped message=\"$message\" />" fi - say_color skip >&3 "skipping test: $@" say_color skip "ok $test_count # skip $1 ($skipped_reason)" : true ;; |