diff options
Diffstat (limited to 't')
89 files changed, 2451 insertions, 627 deletions
@@ -79,6 +79,10 @@ appropriately before running "make". --debug:: This may help the person who is developing a new test. It causes the command defined with test_debug to run. + The "trash" directory (used to store all temporary data + during testing) is not deleted even if there are no + failed tests so that you can inspect its contents after + the test finished. --immediate:: This causes the test to immediately exit upon the first @@ -98,6 +102,13 @@ appropriately before running "make". not see any output, this option implies --verbose. For convenience, it also implies --tee. + Note that valgrind is run with the option --leak-check=no, + as the git process is short-lived and some errors are not + interesting. In order to run a single command under the same + conditions manually, you should set GIT_VALGRIND to point to + the 't/valgrind/' directory and use the commands under + 't/valgrind/bin/'. + --tee:: In addition to printing the test output to the terminal, write it to files named 't/test-results/$TEST_NAME.out'. @@ -190,7 +201,7 @@ we are testing. If you create files under t/ directory (i.e. here) that is not the top-level test script, never name the file to match the above pattern. The Makefile here considers all such files as the -top-level test script and tries to run all of them. A care is +top-level test script and tries to run all of them. Care is especially needed if you are creating a common test library file, similar to test-lib.sh, because such a library file may not be suitable for standalone execution. @@ -274,9 +285,8 @@ Do: - Check the test coverage for your tests. See the "Test coverage" below. - Don't blindly follow test coverage metrics, they're a good way to - spot if you've missed something. If a new function you added - doesn't have any coverage you're probably doing something wrong, + Don't blindly follow test coverage metrics; if a new function you added + doesn't have any coverage, then you're probably doing something wrong, but having 100% coverage doesn't necessarily mean that you tested everything. @@ -328,7 +338,7 @@ Keep in mind: Skipping tests -------------- -If you need to skip tests you should do so be using the three-arg form +If you need to skip tests you should do so by using the three-arg form of the test_* functions (see the "Test harness library" section below), e.g.: @@ -420,7 +430,7 @@ library for your script to use. - test_tick Make commit and tag names consistent by setting the author and - committer times to defined stated. Subsequent calls will + committer times to defined state. Subsequent calls will advance the times by a fixed amount. - test_commit <message> [<filename> [<contents>]] diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index 3f24384371..d3829b8d0a 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -157,7 +157,7 @@ test_http_push_nonff() { grep "^ ! \[rejected\][ ]*$BRANCH -> $BRANCH (non-fast-forward)$" output ' - test_expect_success 'non-fast-forward push shows help message' ' + test_expect_success C_LOCALE_OUTPUT 'non-fast-forward push shows help message' ' grep "To prevent you from losing history, non-fast-forward updates were rejected" \ output ' diff --git a/t/lib-terminal.sh b/t/lib-terminal.sh index c383b57ed9..58d911d21b 100644 --- a/t/lib-terminal.sh +++ b/t/lib-terminal.sh @@ -1,8 +1,24 @@ #!/bin/sh -test_expect_success 'set up terminal for tests' ' - if - test_have_prereq PERL && +test_expect_success PERL 'set up terminal for tests' ' + # Reading from the pty master seems to get stuck _sometimes_ + # on Mac OS X 10.5.0, using Perl 5.10.0 or 5.8.9. + # + # Reproduction recipe: run + # + # i=0 + # while ./test-terminal.perl echo hi $i + # do + # : $((i = $i + 1)) + # done + # + # After 2000 iterations or so it hangs. + # https://rt.cpan.org/Ticket/Display.html?id=65692 + # + if test "$(uname -s)" = Darwin + then + : + elif "$PERL_PATH" "$TEST_DIRECTORY"/test-terminal.perl \ sh -c "test -t 1 && test -t 2" then diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 8deec75c3a..f4e8f43bae 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -435,7 +435,7 @@ test_expect_success 'update-index D/F conflict' ' test $numpath0 = 1 ' -test_expect_success SYMLINKS 'absolute path works as expected' ' +test_expect_success SYMLINKS 'real path works as expected' ' mkdir first && ln -s ../.git first/.git && mkdir second && @@ -443,14 +443,14 @@ test_expect_success SYMLINKS 'absolute path works as expected' ' mkdir third && dir="$(cd .git; pwd -P)" && dir2=third/../second/other/.git && - test "$dir" = "$(test-path-utils make_absolute_path $dir2)" && + test "$dir" = "$(test-path-utils real_path $dir2)" && file="$dir"/index && - test "$file" = "$(test-path-utils make_absolute_path $dir2/index)" && + test "$file" = "$(test-path-utils real_path $dir2/index)" && basename=blub && - test "$dir/$basename" = "$(cd .git && test-path-utils make_absolute_path "$basename")" && + test "$dir/$basename" = "$(cd .git && test-path-utils real_path "$basename")" && ln -s ../first/file .git/syml && sym="$(cd first; pwd -P)"/file && - test "$sym" = "$(test-path-utils make_absolute_path "$dir2/syml")" + test "$sym" = "$(test-path-utils real_path "$dir2/syml")" ' test_expect_success 'very long name in the index handled sanely' ' diff --git a/t/t0001-init.sh b/t/t0001-init.sh index f684993211..54520f6fa6 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -47,7 +47,7 @@ test_expect_success 'plain nested in bare' ' test_expect_success 'plain through aliased command, outside any git repo' ' ( - sane_unset GIT_DIR GIT_WORK_TREE GIT_CONFIG_NOGLOBAL && + sane_unset GIT_DIR GIT_WORK_TREE && HOME=$(pwd)/alias-config && export HOME && mkdir alias-config && @@ -180,7 +180,7 @@ test_expect_success 'GIT_DIR & GIT_WORK_TREE (2)' ' fi ' -test_expect_success 'reinit' ' +test_expect_success C_LOCALE_OUTPUT 'reinit' ' ( sane_unset GIT_CONFIG GIT_WORK_TREE GIT_CONFIG && @@ -231,7 +231,6 @@ test_expect_success 'init with init.templatedir set' ' git config -f "$test_config" init.templatedir "${HOME}/templatedir-source" && mkdir templatedir-set && cd templatedir-set && - sane_unset GIT_CONFIG_NOGLOBAL && sane_unset GIT_TEMPLATE_DIR && NO_SET_GIT_TEMPLATE_DIR=t && export NO_SET_GIT_TEMPLATE_DIR && @@ -243,7 +242,6 @@ test_expect_success 'init with init.templatedir set' ' test_expect_success 'init --bare/--shared overrides system/global config' ' ( test_config="$HOME"/.gitconfig && - sane_unset GIT_CONFIG_NOGLOBAL && git config -f "$test_config" core.bare false && git config -f "$test_config" core.sharedRepository 0640 && mkdir init-bare-shared-override && @@ -258,7 +256,6 @@ test_expect_success 'init --bare/--shared overrides system/global config' ' test_expect_success 'init honors global core.sharedRepository' ' ( test_config="$HOME"/.gitconfig && - sane_unset GIT_CONFIG_NOGLOBAL && git config -f "$test_config" core.sharedRepository 0666 && mkdir shared-honor-global && cd shared-honor-global && @@ -374,4 +371,50 @@ test_expect_success 'init prefers command line to GIT_DIR' ' ! test -d otherdir/refs ' +test_expect_success 'init with separate gitdir' ' + rm -rf newdir && + git init --separate-git-dir realgitdir newdir && + echo "gitdir: `pwd`/realgitdir" >expected && + test_cmp expected newdir/.git && + test -d realgitdir/refs +' + +test_expect_success 're-init to update git link' ' + ( + cd newdir && + git init --separate-git-dir ../surrealgitdir + ) && + echo "gitdir: `pwd`/surrealgitdir" >expected && + test_cmp expected newdir/.git && + test -d surrealgitdir/refs && + ! test -d realgitdir/refs +' + +test_expect_success 're-init to move gitdir' ' + rm -rf newdir realgitdir surrealgitdir && + git init newdir && + ( + cd newdir && + git init --separate-git-dir ../realgitdir + ) && + echo "gitdir: `pwd`/realgitdir" >expected && + test_cmp expected newdir/.git && + test -d realgitdir/refs +' + +test_expect_success SYMLINKS 're-init to move gitdir symlink' ' + rm -rf newdir realgitdir && + git init newdir && + ( + cd newdir && + mv .git here && + ln -s here .git && + git init -L ../realgitdir + ) && + echo "gitdir: `pwd`/realgitdir" >expected && + test_cmp expected newdir/.git && + test -d realgitdir/refs && + ! test -d newdir/here +' + test_done diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index 20924506af..ae266147b6 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -19,7 +19,7 @@ usage: test-parse-options <options> --set23 set integer to 23 -t <time> get timestamp of <time> -L, --length <str> get length of <str> - -F, --file <FILE> set file to <FILE> + -F, --file <file> set file to <file> String options -s, --string <string> diff --git a/t/t0080-vcs-svn.sh b/t/t0080-vcs-svn.sh deleted file mode 100755 index 99a314b080..0000000000 --- a/t/t0080-vcs-svn.sh +++ /dev/null @@ -1,117 +0,0 @@ -#!/bin/sh - -test_description='check infrastructure for svn importer' - -. ./test-lib.sh -uint32_max=4294967295 - -test_expect_success 'obj pool: store data' ' - cat <<-\EOF >expected && - 0 - 1 - EOF - - test-obj-pool <<-\EOF >actual && - alloc one 16 - set one 13 - test one 13 - reset one - EOF - test_cmp expected actual -' - -test_expect_success 'obj pool: NULL is offset ~0' ' - echo "$uint32_max" >expected && - echo null one | test-obj-pool >actual && - test_cmp expected actual -' - -test_expect_success 'obj pool: out-of-bounds access' ' - cat <<-EOF >expected && - 0 - 0 - $uint32_max - $uint32_max - 16 - 20 - $uint32_max - EOF - - test-obj-pool <<-\EOF >actual && - alloc one 16 - alloc two 16 - offset one 20 - offset two 20 - alloc one 5 - offset one 20 - free one 1 - offset one 20 - reset one - reset two - EOF - test_cmp expected actual -' - -test_expect_success 'obj pool: high-water mark' ' - cat <<-\EOF >expected && - 0 - 0 - 10 - 20 - 20 - 20 - EOF - - test-obj-pool <<-\EOF >actual && - alloc one 10 - committed one - alloc one 10 - commit one - committed one - alloc one 10 - free one 20 - committed one - reset one - EOF - test_cmp expected actual -' - -test_expect_success 'string pool' ' - echo a does not equal b >expected.differ && - echo a equals a >expected.match && - echo equals equals equals >expected.matchmore && - - test-string-pool "a,--b" >actual.differ && - test-string-pool "a,a" >actual.match && - test-string-pool "equals-equals" >actual.matchmore && - test_must_fail test-string-pool a,a,a && - test_must_fail test-string-pool a && - - test_cmp expected.differ actual.differ && - test_cmp expected.match actual.match && - test_cmp expected.matchmore actual.matchmore -' - -test_expect_success 'treap sort' ' - cat <<-\EOF >unsorted && - 68 - 12 - 13 - 13 - 68 - 13 - 13 - 21 - 10 - 11 - 12 - 13 - 13 - EOF - sort unsorted >expected && - - test-treap <unsorted >actual && - test_cmp expected actual -' - -test_done diff --git a/t/t0081-line-buffer.sh b/t/t0081-line-buffer.sh index 1dbe1c9b08..bd83ed371a 100755 --- a/t/t0081-line-buffer.sh +++ b/t/t0081-line-buffer.sh @@ -2,74 +2,14 @@ test_description="Test the svn importer's input handling routines. -These tests exercise the line_buffer library, but their real purpose -is to check the assumptions that library makes of the platform's input -routines. Processes engaged in bi-directional communication would -hang if fread or fgets is too greedy. +These tests provide some simple checks that the line_buffer API +behaves as advertised. While at it, check that input of newlines and null bytes are handled correctly. " . ./test-lib.sh -test -n "$GIT_REMOTE_SVN_TEST_BIG_FILES" && test_set_prereq EXPENSIVE - -generate_tens_of_lines () { - tens=$1 && - line=$2 && - - i=0 && - while test $i -lt "$tens" - do - for j in a b c d e f g h i j - do - echo "$line" - done && - : $((i = $i + 1)) || - return - done -} - -long_read_test () { - : each line is 10 bytes, including newline && - line=abcdefghi && - echo "$line" >expect && - - if ! test_declared_prereq PIPE - then - echo >&4 "long_read_test: need to declare PIPE prerequisite" - return 127 - fi && - tens_of_lines=$(($1 / 100 + 1)) && - lines=$(($tens_of_lines * 10)) && - readsize=$((($lines - 1) * 10 + 3)) && - copysize=7 && - rm -f input && - mkfifo input && - { - { - generate_tens_of_lines $tens_of_lines "$line" && - sleep 100 - } >input & - } && - test-line-buffer input <<-EOF >output && - binary $readsize - copy $copysize - EOF - kill $! && - test_line_count = $lines output && - tail -n 1 <output >actual && - test_cmp expect actual -} - -test_expect_success 'setup: have pipes?' ' - rm -f frob && - if mkfifo frob - then - test_set_prereq PIPE - fi -' - test_expect_success 'hello world' ' echo ">HELLO" >expect && test-line-buffer <<-\EOF >actual && @@ -79,21 +19,6 @@ test_expect_success 'hello world' ' test_cmp expect actual ' -test_expect_success PIPE '0-length read, no input available' ' - printf ">" >expect && - rm -f input && - mkfifo input && - { - sleep 100 >input & - } && - test-line-buffer input <<-\EOF >actual && - binary 0 - copy 0 - EOF - kill $! && - test_cmp expect actual -' - test_expect_success '0-length read, send along greeting' ' echo ">HELLO" >expect && test-line-buffer <<-\EOF >actual && @@ -104,33 +29,6 @@ test_expect_success '0-length read, send along greeting' ' test_cmp expect actual ' -test_expect_success PIPE '1-byte read, no input available' ' - printf ">%s" ab >expect && - rm -f input && - mkfifo input && - { - { - printf "%s" a && - printf "%s" b && - sleep 100 - } >input & - } && - test-line-buffer input <<-\EOF >actual && - binary 1 - copy 1 - EOF - kill $! && - test_cmp expect actual -' - -test_expect_success PIPE 'long read (around 8192 bytes)' ' - long_read_test 8192 -' - -test_expect_success PIPE,EXPENSIVE 'longer read (around 65536 bytes)' ' - long_read_test 65536 -' - test_expect_success 'read from file descriptor' ' rm -f input && echo hello >expect && diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh index dd32432d62..6d52b824b1 100755 --- a/t/t1007-hash-object.sh +++ b/t/t1007-hash-object.sh @@ -188,4 +188,17 @@ for args in "-w --stdin-paths" "--stdin-paths -w"; do pop_repo done +test_expect_success 'corrupt tree' ' + echo abc >malformed-tree + test_must_fail git hash-object -t tree malformed-tree +' + +test_expect_success 'corrupt commit' ' + test_must_fail git hash-object -t commit --stdin </dev/null +' + +test_expect_success 'corrupt tag' ' + test_must_fail git hash-object -t tag --stdin </dev/null +' + test_done diff --git a/t/t1021-rerere-in-workdir.sh b/t/t1021-rerere-in-workdir.sh new file mode 100755 index 0000000000..301e071ff7 --- /dev/null +++ b/t/t1021-rerere-in-workdir.sh @@ -0,0 +1,55 @@ +#!/bin/sh + +test_description='rerere run in a workdir' +. ./test-lib.sh + +test_expect_success SYMLINKS setup ' + git config rerere.enabled true && + >world && + git add world && + test_tick && + git commit -m initial && + + echo hello >world && + test_tick && + git commit -a -m hello && + + git checkout -b side HEAD^ && + echo goodbye >world && + test_tick && + git commit -a -m goodbye && + + git checkout master +' + +test_expect_success SYMLINKS 'rerere in workdir' ' + rm -rf .git/rr-cache && + "$SHELL_PATH" "$TEST_DIRECTORY/../contrib/workdir/git-new-workdir" . work && + ( + cd work && + test_must_fail git merge side && + git rerere status >actual && + echo world >expect && + test_cmp expect actual + ) +' + +# This fails because we don't resolve relative symlink in mkdir_in_gitdir() +# For the purpose of helping contrib/workdir/git-new-workdir users, we do not +# have to support relative symlinks, but it might be nicer to make this work +# with a relative symbolic link someday. +test_expect_failure SYMLINKS 'rerere in workdir (relative)' ' + rm -rf .git/rr-cache && + "$SHELL_PATH" "$TEST_DIRECTORY/../contrib/workdir/git-new-workdir" . krow && + ( + cd krow && + rm -f .git/rr-cache && + ln -s ../.git/rr-cache .git/rr-cache && + test_must_fail git merge side && + git rerere status >actual && + echo world >expect && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t1200-tutorial.sh b/t/t1200-tutorial.sh index bfa2c2190d..3264fefbad 100755 --- a/t/t1200-tutorial.sh +++ b/t/t1200-tutorial.sh @@ -163,7 +163,10 @@ test_expect_success 'git resolve' ' git checkout mybranch && git merge -m "Merge upstream changes." master | sed -e "1s/[0-9a-f]\{7\}/VARIABLE/g" \ - -e "s/^Fast[- ]forward /FASTFORWARD /" >resolve.output && + -e "s/^Fast[- ]forward /FASTFORWARD /" >resolve.output +' + +test_expect_success C_LOCALE_OUTPUT 'git resolve output' ' test_cmp resolve.expect resolve.output ' diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index d0e55465ff..53fb8228cf 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -876,11 +876,25 @@ test_expect_success 'check split_cmdline return' " " test_expect_success 'git -c "key=value" support' ' - test "z$(git -c name=value config name)" = zvalue && test "z$(git -c core.name=value config core.name)" = zvalue && - test "z$(git -c CamelCase=value config camelcase)" = zvalue && - test "z$(git -c flag config --bool flag)" = ztrue && - test_must_fail git -c core.name=value config name + test "z$(git -c foo.CamelCase=value config foo.camelcase)" = zvalue && + test "z$(git -c foo.flag config --bool foo.flag)" = ztrue && + test_must_fail git -c name=value config core.name +' + +test_expect_success 'key sanity-checking' ' + test_must_fail git config foo=bar && + test_must_fail git config foo=.bar && + test_must_fail git config foo.ba=r && + test_must_fail git config foo.1bar && + test_must_fail git config foo."ba + z".bar && + test_must_fail git config . false && + test_must_fail git config .foo false && + test_must_fail git config foo. false && + test_must_fail git config .foo. false && + git config foo.bar true && + git config foo."ba =z".bar false ' test_done diff --git a/t/t1510-repo-setup.sh b/t/t1510-repo-setup.sh index 15101d5e03..ec50a9ad70 100755 --- a/t/t1510-repo-setup.sh +++ b/t/t1510-repo-setup.sh @@ -57,7 +57,7 @@ test_repo () { export GIT_WORK_TREE fi && rm -f trace && - GIT_TRACE="$(pwd)/trace" git symbolic-ref HEAD >/dev/null && + GIT_TRACE_SETUP="$(pwd)/trace" git symbolic-ref HEAD >/dev/null && grep '^setup: ' trace >result && test_cmp expected result ) diff --git a/t/t2019-checkout-ambiguous-ref.sh b/t/t2019-checkout-ambiguous-ref.sh new file mode 100755 index 0000000000..cc34e5535b --- /dev/null +++ b/t/t2019-checkout-ambiguous-ref.sh @@ -0,0 +1,59 @@ +#!/bin/sh + +test_description='checkout handling of ambiguous (branch/tag) refs' +. ./test-lib.sh + +test_expect_success 'setup ambiguous refs' ' + test_commit branch file && + git branch ambiguity && + git branch vagueness && + test_commit tag file && + git tag ambiguity && + git tag vagueness HEAD:file && + test_commit other file +' + +test_expect_success 'checkout ambiguous ref succeeds' ' + git checkout ambiguity >stdout 2>stderr +' + +test_expect_success 'checkout produces ambiguity warning' ' + grep "warning.*ambiguous" stderr +' + +test_expect_success 'checkout chooses branch over tag' ' + echo refs/heads/ambiguity >expect && + git symbolic-ref HEAD >actual && + test_cmp expect actual && + echo branch >expect && + test_cmp expect file +' + +test_expect_success C_LOCALE_OUTPUT 'checkout reports switch to branch' ' + grep "Switched to branch" stderr && + ! grep "^HEAD is now at" stderr +' + +test_expect_success 'checkout vague ref succeeds' ' + git checkout vagueness >stdout 2>stderr && + test_set_prereq VAGUENESS_SUCCESS +' + +test_expect_success VAGUENESS_SUCCESS 'checkout produces ambiguity warning' ' + grep "warning.*ambiguous" stderr +' + +test_expect_success VAGUENESS_SUCCESS 'checkout chooses branch over tag' ' + echo refs/heads/vagueness >expect && + git symbolic-ref HEAD >actual && + test_cmp expect actual && + echo branch >expect && + test_cmp expect file +' + +test_expect_success VAGUENESS_SUCCESS,C_LOCALE_OUTPUT 'checkout reports switch to branch' ' + grep "Switched to branch" stderr && + ! grep "^HEAD is now at" stderr +' + +test_done diff --git a/t/t2020-checkout-detach.sh b/t/t2020-checkout-detach.sh new file mode 100755 index 0000000000..569b27fe8d --- /dev/null +++ b/t/t2020-checkout-detach.sh @@ -0,0 +1,142 @@ +#!/bin/sh + +test_description='checkout into detached HEAD state' +. ./test-lib.sh + +check_detached () { + test_must_fail git symbolic-ref -q HEAD >/dev/null +} + +check_not_detached () { + git symbolic-ref -q HEAD >/dev/null +} + +ORPHAN_WARNING='you are leaving .* commit.*behind' +check_orphan_warning() { + grep "$ORPHAN_WARNING" "$1" +} +check_no_orphan_warning() { + ! grep "$ORPHAN_WARNING" "$1" +} + +reset () { + git checkout master && + check_not_detached +} + +test_expect_success 'setup' ' + test_commit one && + test_commit two && + test_commit three && git tag -d three && + test_commit four && git tag -d four && + git branch branch && + git tag tag +' + +test_expect_success 'checkout branch does not detach' ' + reset && + git checkout branch && + check_not_detached +' + +test_expect_success 'checkout tag detaches' ' + reset && + git checkout tag && + check_detached +' + +test_expect_success 'checkout branch by full name detaches' ' + reset && + git checkout refs/heads/branch && + check_detached +' + +test_expect_success 'checkout non-ref detaches' ' + reset && + git checkout branch^ && + check_detached +' + +test_expect_success 'checkout ref^0 detaches' ' + reset && + git checkout branch^0 && + check_detached +' + +test_expect_success 'checkout --detach detaches' ' + reset && + git checkout --detach branch && + check_detached +' + +test_expect_success 'checkout --detach without branch name' ' + reset && + git checkout --detach && + check_detached +' + +test_expect_success 'checkout --detach errors out for non-commit' ' + reset && + test_must_fail git checkout --detach one^{tree} && + check_not_detached +' + +test_expect_success 'checkout --detach errors out for extra argument' ' + reset && + git checkout master && + test_must_fail git checkout --detach tag one.t && + check_not_detached +' + +test_expect_success 'checkout --detached and -b are incompatible' ' + reset && + test_must_fail git checkout --detach -b newbranch tag && + check_not_detached +' + +test_expect_success 'checkout --detach moves HEAD' ' + reset && + git checkout one && + git checkout --detach two && + git diff --exit-code HEAD && + git diff --exit-code two +' + +test_expect_success 'checkout warns on orphan commits' ' + reset && + git checkout --detach two && + echo content >orphan && + git add orphan && + git commit -a -m orphan && + git checkout master 2>stderr && + check_orphan_warning stderr +' + +test_expect_success 'checkout does not warn leaving ref tip' ' + reset && + git checkout --detach two && + git checkout master 2>stderr && + check_no_orphan_warning stderr +' + +test_expect_success 'checkout does not warn leaving reachable commit' ' + reset && + git checkout --detach HEAD^ && + git checkout master 2>stderr && + check_no_orphan_warning stderr +' + +cat >expect <<'EOF' +Your branch is behind 'master' by 1 commit, and can be fast-forwarded. +EOF +test_expect_success 'tracking count is accurate after orphan check' ' + reset && + git branch child master^ && + git config branch.child.remote . && + git config branch.child.merge refs/heads/master && + git checkout child^ && + git checkout child >stdout && + test_cmp expect stdout +' + +test_done diff --git a/t/t2021-checkout-overwrite.sh b/t/t2021-checkout-overwrite.sh new file mode 100755 index 0000000000..5da63e9fa2 --- /dev/null +++ b/t/t2021-checkout-overwrite.sh @@ -0,0 +1,50 @@ +#!/bin/sh + +test_description='checkout must not overwrite an untracked objects' +. ./test-lib.sh + +test_expect_success 'setup' ' + + mkdir -p a/b/c && + >a/b/c/d && + git add -A && + git commit -m base && + git tag start +' + +test_expect_success 'create a commit where dir a/b changed to file' ' + + git checkout -b file && + rm -rf a/b && + >a/b && + git add -A && + git commit -m "dir to file" +' + +test_expect_success 'checkout commit with dir must not remove untracked a/b' ' + + git rm --cached a/b && + git commit -m "un-track the file" && + test_must_fail git checkout start && + test -f a/b +' + +test_expect_success SYMLINKS 'create a commit where dir a/b changed to symlink' ' + + rm -rf a/b && # cleanup if previous test failed + git checkout -f -b symlink start && + rm -rf a/b && + ln -s foo a/b && + git add -A && + git commit -m "dir to symlink" +' + +test_expect_success SYMLINKS 'checkout commit with dir must not remove untracked a/b' ' + + git rm --cached a/b && + git commit -m "un-track the symlink" && + test_must_fail git checkout start && + test -h a/b +' + +test_done diff --git a/t/t2200-add-update.sh b/t/t2200-add-update.sh index 0692427cb6..856e7da1f2 100755 --- a/t/t2200-add-update.sh +++ b/t/t2200-add-update.sh @@ -111,7 +111,7 @@ test_expect_success 'touch and then add explicitly' ' ' -test_expect_success 'add -n -u should not add but just report' ' +test_expect_success C_LOCALE_OUTPUT 'add -n -u should not add but just report' ' ( echo "add '\''check'\''" && diff --git a/t/t2204-add-ignored.sh b/t/t2204-add-ignored.sh index 24afdabab7..49753362f0 100755 --- a/t/t2204-add-ignored.sh +++ b/t/t2204-add-ignored.sh @@ -31,18 +31,21 @@ do rm -f .git/index && test_must_fail git add "$i" 2>err && git ls-files "$i" >out && - ! test -s out && - grep -e "Use -f if" err && - cat err + ! test -s out + ' + + test_expect_success C_LOCALE_OUTPUT "complaints for ignored $i output" ' + grep -e "Use -f if" err ' test_expect_success "complaints for ignored $i with unignored file" ' rm -f .git/index && test_must_fail git add "$i" file 2>err && git ls-files "$i" >out && - ! test -s out && - grep -e "Use -f if" err && - cat err + ! test -s out + ' + test_expect_success C_LOCALE_OUTPUT "complaints for ignored $i with unignored file output" ' + grep -e "Use -f if" err ' done @@ -54,9 +57,14 @@ do cd dir && test_must_fail git add "$i" 2>err && git ls-files "$i" >out && - ! test -s out && - grep -e "Use -f if" err && - cat err + ! test -s out + ) + ' + + test_expect_success C_LOCALE_OUTPUT "complaints for ignored $i in dir output" ' + ( + cd dir && + grep -e "Use -f if" err ) ' done @@ -69,9 +77,14 @@ do cd sub && test_must_fail git add "$i" 2>err && git ls-files "$i" >out && - ! test -s out && - grep -e "Use -f if" err && - cat err + ! test -s out + ) + ' + + test_expect_success C_LOCALE_OUTPUT "complaints for ignored $i in sub output" ' + ( + cd sub && + grep -e "Use -f if" err ) ' done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index 34794f8a70..806fdccce1 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -312,7 +312,7 @@ test_expect_success 'merge-recursive result' ' ' -test_expect_success 'fail if the index has unresolved entries' ' +test_expect_success C_LOCALE_OUTPUT 'fail if the index has unresolved entries' ' rm -fr [abcd] && git checkout -f "$c1" && diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index f308235f5d..286a2a6869 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -203,7 +203,7 @@ test_expect_success 'test deleting branch deletes branch config' \ test -z "$(git config branch.my7.remote)" && test -z "$(git config branch.my7.merge)"' -test_expect_success 'test deleting branch without config' \ +test_expect_success C_LOCALE_OUTPUT 'test deleting branch without config' \ 'git branch my7 s && sha1=$(git rev-parse my7 | cut -c 1-7) && test "$(git branch -d my7 2>&1)" = "Deleted branch my7 (was $sha1)."' @@ -223,6 +223,11 @@ test_expect_success \ 'branch from non-branch HEAD w/--track causes failure' \ 'test_must_fail git branch --track my10 HEAD^' +test_expect_success \ + 'branch from tag w/--track causes failure' \ + 'git tag foobar && + test_must_fail git branch --track my11 foobar' + # Keep this test last, as it changes the current branch cat >expect <<EOF 0000000000000000000000000000000000000000 $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master @@ -488,6 +493,15 @@ test_expect_success 'autosetuprebase always on an untracked remote branch' ' test "z$(git config branch.myr20.rebase)" = z ' +test_expect_success 'autosetuprebase always on detached HEAD' ' + git config branch.autosetupmerge always && + test_when_finished git checkout master && + git checkout HEAD^0 && + git branch my11 && + test -z "$(git config branch.my11.remote)" && + test -z "$(git config branch.my11.merge)" +' + test_expect_success 'detect misconfigured autosetuprebase (bad value)' ' git config branch.autosetuprebase garbage && test_must_fail git branch diff --git a/t/t3203-branch-output.sh b/t/t3203-branch-output.sh index 6028748c6c..4ef7d09115 100755 --- a/t/t3203-branch-output.sh +++ b/t/t3203-branch-output.sh @@ -72,7 +72,7 @@ cat >expect <<'EOF' branch-two master EOF -test_expect_success 'git branch shows detached HEAD properly' ' +test_expect_success C_LOCALE_OUTPUT 'git branch shows detached HEAD properly' ' git checkout HEAD^0 && git branch >actual && test_cmp expect actual diff --git a/t/t3306-notes-prune.sh b/t/t3306-notes-prune.sh index c4282179b3..86bf909ee3 100755 --- a/t/t3306-notes-prune.sh +++ b/t/t3306-notes-prune.sh @@ -20,6 +20,9 @@ test_expect_success 'setup: create a few commits with notes' ' git add file3 && test_tick && git commit -m 3rd && + COMMIT_FILE=.git/objects/5e/e1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && + test -f $COMMIT_FILE && + test-chmtime =+0 $COMMIT_FILE && git notes add -m "Note #3" ' diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index 043954422c..753a6c972c 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -91,7 +91,7 @@ test_expect_success 'cherry-pick on stat-dirty working tree' ' ) ' -test_expect_success 'revert forbidden on dirty working tree' ' +test_expect_success C_LOCALE_OUTPUT 'revert forbidden on dirty working tree' ' echo content >extra_file && git add extra_file && diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh index 607bf25d8f..c0c8330c20 100755 --- a/t/t3507-cherry-pick-conflict.sh +++ b/t/t3507-cherry-pick-conflict.sh @@ -11,6 +11,18 @@ test_description='test cherry-pick and revert with conflicts . ./test-lib.sh +test_cmp_rev () { + git rev-parse --verify "$1" >expect.rev && + git rev-parse --verify "$2" >actual.rev && + test_cmp expect.rev actual.rev +} + +pristine_detach () { + git checkout -f "$1^0" && + git read-tree -u --reset HEAD && + git clean -d -f -f -q -x +} + test_expect_success setup ' echo unrelated >unrelated && @@ -23,13 +35,7 @@ test_expect_success setup ' ' test_expect_success 'failed cherry-pick does not advance HEAD' ' - - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && - - git update-index --refresh && - git diff-index --exit-code HEAD && + pristine_detach initial && head=$(git rev-parse HEAD) && test_must_fail git cherry-pick picked && @@ -38,34 +44,97 @@ test_expect_success 'failed cherry-pick does not advance HEAD' ' test "$head" = "$newhead" ' -test_expect_success 'advice from failed cherry-pick' " - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && - - git update-index --refresh && - git diff-index --exit-code HEAD && +test_expect_success C_LOCALE_OUTPUT 'advice from failed cherry-pick' " + pristine_detach initial && picked=\$(git rev-parse --short picked) && cat <<-EOF >expected && error: could not apply \$picked... picked hint: after resolving the conflicts, mark the corrected paths hint: with 'git add <paths>' or 'git rm <paths>' - hint: and commit the result with 'git commit -c \$picked' + hint: and commit the result with 'git commit' EOF test_must_fail git cherry-pick picked 2>actual && test_cmp expected actual " -test_expect_success 'failed cherry-pick produces dirty index' ' +test_expect_success 'failed cherry-pick sets CHERRY_PICK_HEAD' ' + pristine_detach initial && + test_must_fail git cherry-pick picked && + test_cmp_rev picked CHERRY_PICK_HEAD +' - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && +test_expect_success 'successful cherry-pick does not set CHERRY_PICK_HEAD' ' + pristine_detach initial && + git cherry-pick base && + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' + +test_expect_success 'cherry-pick --no-commit does not set CHERRY_PICK_HEAD' ' + pristine_detach initial && + git cherry-pick --no-commit base && + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' + +test_expect_success 'GIT_CHERRY_PICK_HELP suppresses CHERRY_PICK_HEAD' ' + pristine_detach initial && + ( + GIT_CHERRY_PICK_HELP="and then do something else" && + export GIT_CHERRY_PICK_HELP && + test_must_fail git cherry-pick picked + ) && + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' + +test_expect_success 'git reset clears CHERRY_PICK_HEAD' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + git reset && + + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' + +test_expect_success 'failed commit does not clear CHERRY_PICK_HEAD' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + test_must_fail git commit && + + test_cmp_rev picked CHERRY_PICK_HEAD +' + +test_expect_success 'cancelled commit does not clear CHERRY_PICK_HEAD' ' + pristine_detach initial && - git update-index --refresh && - git diff-index --exit-code HEAD && + test_must_fail git cherry-pick picked && + echo resolved >foo && + git add foo && + git update-index --refresh -q && + test_must_fail git diff-index --exit-code HEAD && + ( + GIT_EDITOR=false && + export GIT_EDITOR && + test_must_fail git commit + ) && + + test_cmp_rev picked CHERRY_PICK_HEAD +' + +test_expect_success 'successful commit clears CHERRY_PICK_HEAD' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + echo resolved >foo && + git add foo && + git commit && + + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' + +test_expect_success 'failed cherry-pick produces dirty index' ' + pristine_detach initial && test_must_fail git cherry-pick picked && @@ -74,9 +143,7 @@ test_expect_success 'failed cherry-pick produces dirty index' ' ' test_expect_success 'failed cherry-pick registers participants in index' ' - - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && + pristine_detach initial && { git checkout base -- foo && git ls-files --stage foo && @@ -90,10 +157,7 @@ test_expect_success 'failed cherry-pick registers participants in index' ' 2 s/ 0 / 2 / 3 s/ 0 / 3 / " < stages > expected && - git checkout -f initial^0 && - - git update-index --refresh && - git diff-index --exit-code HEAD && + git read-tree -u --reset HEAD && test_must_fail git cherry-pick picked && git ls-files --stage --unmerged > actual && @@ -102,10 +166,7 @@ test_expect_success 'failed cherry-pick registers participants in index' ' ' test_expect_success 'failed cherry-pick describes conflict in work tree' ' - - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && + pristine_detach initial && cat <<-EOF > expected && <<<<<<< HEAD a @@ -114,9 +175,6 @@ test_expect_success 'failed cherry-pick describes conflict in work tree' ' >>>>>>> objid picked EOF - git update-index --refresh && - git diff-index --exit-code HEAD && - test_must_fail git cherry-pick picked && sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && @@ -124,11 +182,8 @@ test_expect_success 'failed cherry-pick describes conflict in work tree' ' ' test_expect_success 'diff3 -m style' ' - + pristine_detach initial && git config merge.conflictstyle diff3 && - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && cat <<-EOF > expected && <<<<<<< HEAD a @@ -139,9 +194,6 @@ test_expect_success 'diff3 -m style' ' >>>>>>> objid picked EOF - git update-index --refresh && - git diff-index --exit-code HEAD && - test_must_fail git cherry-pick picked && sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && @@ -149,10 +201,8 @@ test_expect_success 'diff3 -m style' ' ' test_expect_success 'revert also handles conflicts sanely' ' - git config --unset merge.conflictstyle && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && + pristine_detach initial && cat <<-EOF > expected && <<<<<<< HEAD a @@ -173,10 +223,7 @@ test_expect_success 'revert also handles conflicts sanely' ' 2 s/ 0 / 2 / 3 s/ 0 / 3 / " < stages > expected-stages && - git checkout -f initial^0 && - - git update-index --refresh && - git diff-index --exit-code HEAD && + git read-tree -u --reset HEAD && head=$(git rev-parse HEAD) && test_must_fail git revert picked && @@ -192,10 +239,8 @@ test_expect_success 'revert also handles conflicts sanely' ' ' test_expect_success 'revert conflict, diff3 -m style' ' + pristine_detach initial && git config merge.conflictstyle diff3 && - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && cat <<-EOF > expected && <<<<<<< HEAD a @@ -206,9 +251,6 @@ test_expect_success 'revert conflict, diff3 -m style' ' >>>>>>> parent of objid picked EOF - git update-index --refresh && - git diff-index --exit-code HEAD && - test_must_fail git revert picked && sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && diff --git a/t/t3700-add.sh b/t/t3700-add.sh index ec7108358e..7de42faf48 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -268,8 +268,12 @@ test_expect_success 'git add --dry-run of existing changed file' " test_expect_success 'git add --dry-run of non-existing file' " echo ignored-file >>.gitignore && - test_must_fail git add --dry-run track-this ignored-file >actual 2>&1 && - echo \"fatal: pathspec 'ignored-file' did not match any files\" | test_cmp - actual + test_must_fail git add --dry-run track-this ignored-file >actual 2>&1 +" + +test_expect_success C_LOCALE_OUTPUT 'git add --dry-run of an existing file output' " + echo \"fatal: pathspec 'ignored-file' did not match any files\" >expect && + test_cmp expect actual " cat >expect.err <<\EOF @@ -283,7 +287,10 @@ add 'track-this' EOF test_expect_success 'git add --dry-run --ignore-missing of non-existing file' ' - test_must_fail git add --dry-run --ignore-missing track-this ignored-file >actual.out 2>actual.err && + test_must_fail git add --dry-run --ignore-missing track-this ignored-file >actual.out 2>actual.err +' + +test_expect_success C_LOCALE_OUTPUT 'git add --dry-run --ignore-missing of non-existing file output' ' test_cmp expect.out actual.out && test_cmp expect.err actual.err ' diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 6fd560ccf1..f62aaf5816 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -556,4 +556,23 @@ test_expect_success 'stash branch should not drop the stash if the branch exists git rev-parse stash@{0} -- ' +test_expect_success 'stash apply shows status same as git status (relative to current directory)' ' + git stash clear && + echo 1 >subdir/subfile1 && + echo 2 >subdir/subfile2 && + git add subdir/subfile1 && + git commit -m subdir && + ( + cd subdir && + echo x >subfile1 && + echo x >../file && + git status >../expect && + git stash && + sane_unset GIT_MERGE_VERBOSITY && + git stash apply + ) | + sed -e 1,2d >actual && # drop "Saved..." and "HEAD is now..." + test_cmp expect actual +' + test_done diff --git a/t/t4001-diff-rename.sh b/t/t4001-diff-rename.sh index 71bac83dd5..cad85450b7 100755 --- a/t/t4001-diff-rename.sh +++ b/t/t4001-diff-rename.sh @@ -64,7 +64,7 @@ test_expect_success \ 'validate the output.' \ 'compare_diff_patch current expected' -test_expect_success 'favour same basenames over different ones' ' +test_expect_success C_LOCALE_OUTPUT 'favour same basenames over different ones' ' cp path1 another-path && git add another-path && git commit -m 1 && @@ -73,7 +73,7 @@ test_expect_success 'favour same basenames over different ones' ' git mv another-path subdir/path1 && git status | grep "renamed: .*path1 -> subdir/path1"' -test_expect_success 'favour same basenames even with minor differences' ' +test_expect_success C_LOCALE_OUTPUT 'favour same basenames even with minor differences' ' git show HEAD:path1 | sed "s/15/16/" > subdir/path1 && git status | grep "renamed: .*path1 -> subdir/path1"' diff --git a/t/t4003-diff-rename-1.sh b/t/t4003-diff-rename-1.sh index c6130c4019..bfa8835638 100755 --- a/t/t4003-diff-rename-1.sh +++ b/t/t4003-diff-rename-1.sh @@ -29,7 +29,7 @@ test_expect_success \ # copy-and-edit one, and rename-and-edit the other. We do not say # anything about rezrov. -GIT_DIFF_OPTS=--unified=0 git diff-index -M -p $tree >current +GIT_DIFF_OPTS=--unified=0 git diff-index -C -p $tree >current cat >expected <<\EOF diff --git a/COPYING b/COPYING.1 copy from COPYING diff --git a/t/t4004-diff-rename-symlink.sh b/t/t4004-diff-rename-symlink.sh index 92a65f4852..6e562c80d1 100755 --- a/t/t4004-diff-rename-symlink.sh +++ b/t/t4004-diff-rename-symlink.sh @@ -35,7 +35,7 @@ test_expect_success SYMLINKS \ # a new creation. test_expect_success SYMLINKS 'setup diff output' " - GIT_DIFF_OPTS=--unified=0 git diff-index -M -p $tree >current && + GIT_DIFF_OPTS=--unified=0 git diff-index -C -p $tree >current && cat >expected <<\EOF diff --git a/bozbar b/bozbar new file mode 120000 diff --git a/t/t4005-diff-rename-2.sh b/t/t4005-diff-rename-2.sh index 1ba359d478..77d7f4946f 100755 --- a/t/t4005-diff-rename-2.sh +++ b/t/t4005-diff-rename-2.sh @@ -29,7 +29,7 @@ test_expect_success \ # and COPYING.2 are based on COPYING, and do not say anything about # rezrov. -git diff-index -M $tree >current +git diff-index -C $tree >current cat >expected <<\EOF :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 0603b3238a076dc6c8022aedc6648fa523a17178 C1234 COPYING COPYING.1 diff --git a/t/t4008-diff-break-rewrite.sh b/t/t4008-diff-break-rewrite.sh index d79d9e1e71..73b4a24f5e 100755 --- a/t/t4008-diff-break-rewrite.sh +++ b/t/t4008-diff-break-rewrite.sh @@ -173,8 +173,8 @@ test_expect_success \ 'compare_diff_raw expected current' test_expect_success \ - 'run diff with -B -M' \ - 'git diff-index -B -M "$tree" >current' + 'run diff with -B -C' \ + 'git diff-index -B -C "$tree" >current' cat >expected <<\EOF :100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 08bb2fb671deff4c03a4d4a0a1315dff98d5732c C095 file0 file1 diff --git a/t/t4009-diff-rename-4.sh b/t/t4009-diff-rename-4.sh index de3f17478e..f22c8e3dba 100755 --- a/t/t4009-diff-rename-4.sh +++ b/t/t4009-diff-rename-4.sh @@ -29,7 +29,7 @@ test_expect_success \ # and COPYING.2 are based on COPYING, and do not say anything about # rezrov. -git diff-index -z -M $tree >current +git diff-index -z -C $tree >current cat >expected <<\EOF :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 0603b3238a076dc6c8022aedc6648fa523a17178 C1234 diff --git a/t/t4010-diff-pathspec.sh b/t/t4010-diff-pathspec.sh index 94df7ae53a..fbc8cd8f05 100755 --- a/t/t4010-diff-pathspec.sh +++ b/t/t4010-diff-pathspec.sh @@ -70,4 +70,36 @@ test_expect_success 'diff-tree pathspec' ' test_cmp expected current ' +EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904 + +test_expect_success 'diff-tree with wildcard shows dir also matches' ' + git diff-tree --name-only $EMPTY_TREE $tree -- "f*" >result && + echo file0 >expected && + test_cmp expected result +' + +test_expect_success 'diff-tree -r with wildcard' ' + git diff-tree -r --name-only $EMPTY_TREE $tree -- "*file1" >result && + echo path1/file1 >expected && + test_cmp expected result +' + +test_expect_success 'diff-tree with wildcard shows dir also matches' ' + git diff-tree --name-only $tree $tree2 -- "path1/f*" >result && + echo path1 >expected && + test_cmp expected result +' + +test_expect_success 'diff-tree -r with wildcard from beginning' ' + git diff-tree -r --name-only $tree $tree2 -- "path1/*file1" >result && + echo path1/file1 >expected && + test_cmp expected result +' + +test_expect_success 'diff-tree -r with wildcard' ' + git diff-tree -r --name-only $tree $tree2 -- "path1/f*" >result && + echo path1/file1 >expected && + test_cmp expected result +' + test_done diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index b8f81d07c3..5daa0f2a0c 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -210,6 +210,9 @@ log -m -p master log -SF master log -S F master log -SF -p master +log -SF master --max-count=0 +log -SF master --max-count=1 +log -SF master --max-count=2 log -GF master log -GF -p master log -GF -p --pickaxe-all master diff --git a/t/t4013/diff.log_-SF_master_--max-count=0 b/t/t4013/diff.log_-SF_master_--max-count=0 new file mode 100644 index 0000000000..c1fc6c8731 --- /dev/null +++ b/t/t4013/diff.log_-SF_master_--max-count=0 @@ -0,0 +1,2 @@ +$ git log -SF master --max-count=0 +$ diff --git a/t/t4013/diff.log_-SF_master_--max-count=1 b/t/t4013/diff.log_-SF_master_--max-count=1 new file mode 100644 index 0000000000..c981a03814 --- /dev/null +++ b/t/t4013/diff.log_-SF_master_--max-count=1 @@ -0,0 +1,7 @@ +$ git log -SF master --max-count=1 +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third +$ diff --git a/t/t4013/diff.log_-SF_master_--max-count=2 b/t/t4013/diff.log_-SF_master_--max-count=2 new file mode 100644 index 0000000000..a6c55fd482 --- /dev/null +++ b/t/t4013/diff.log_-SF_master_--max-count=2 @@ -0,0 +1,7 @@ +$ git log -SF master --max-count=2 +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third +$ diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 027c13d52c..c3cdb52053 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -614,7 +614,7 @@ echo "fatal: --name-only does not make sense" > expect.name-only echo "fatal: --name-status does not make sense" > expect.name-status echo "fatal: --check does not make sense" > expect.check -test_expect_success 'options no longer allowed for format-patch' ' +test_expect_success C_LOCALE_OUTPUT 'options no longer allowed for format-patch' ' test_must_fail git format-patch --name-only 2> output && test_cmp expect.name-only output && test_must_fail git format-patch --name-status 2> output && @@ -709,4 +709,88 @@ test_expect_success TTY 'format-patch --stdout paginates' ' test_path_is_missing .git/pager_used ' +test_expect_success 'format-patch handles multi-line subjects' ' + rm -rf patches/ && + echo content >>file && + for i in one two three; do echo $i; done >msg && + git add file && + git commit -F msg && + git format-patch -o patches -1 && + grep ^Subject: patches/0001-one.patch >actual && + echo "Subject: [PATCH] one two three" >expect && + test_cmp expect actual +' + +test_expect_success 'format-patch handles multi-line encoded subjects' ' + rm -rf patches/ && + echo content >>file && + for i in en två tre; do echo $i; done >msg && + git add file && + git commit -F msg && + git format-patch -o patches -1 && + grep ^Subject: patches/0001-en.patch >actual && + echo "Subject: [PATCH] =?UTF-8?q?en=20tv=C3=A5=20tre?=" >expect && + test_cmp expect actual +' + +M8="foo bar " +M64=$M8$M8$M8$M8$M8$M8$M8$M8 +M512=$M64$M64$M64$M64$M64$M64$M64$M64 +cat >expect <<'EOF' +Subject: [PATCH] foo bar foo bar foo bar foo bar foo bar foo bar foo bar foo + bar foo bar foo bar foo bar foo bar foo bar foo bar foo bar + foo bar foo bar foo bar foo bar foo bar foo bar foo bar foo + bar foo bar foo bar foo bar foo bar foo bar foo bar foo bar + foo bar foo bar foo bar foo bar foo bar foo bar foo bar foo + bar foo bar foo bar foo bar foo bar foo bar foo bar foo bar + foo bar foo bar foo bar foo bar foo bar foo bar foo bar foo + bar foo bar foo bar foo bar foo bar foo bar foo bar foo bar + foo bar foo bar foo bar foo bar +EOF +test_expect_success 'format-patch wraps extremely long headers (ascii)' ' + echo content >>file && + git add file && + git commit -m "$M512" && + git format-patch --stdout -1 >patch && + sed -n "/^Subject/p; /^ /p; /^$/q" <patch >subject && + test_cmp expect subject +' + +M8="föö bar " +M64=$M8$M8$M8$M8$M8$M8$M8$M8 +M512=$M64$M64$M64$M64$M64$M64$M64$M64 +cat >expect <<'EOF' +Subject: [PATCH] =?UTF-8?q?f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6=C3=B6=20bar=20f=C3=B6?= + =?UTF-8?q?=C3=B6=20bar=20f=C3=B6=C3=B6=20bar?= +EOF +test_expect_success 'format-patch wraps extremely long headers (rfc2047)' ' + rm -rf patches/ && + echo content >>file && + git add file && + git commit -m "$M512" && + git format-patch --stdout -1 >patch && + sed -n "/^Subject/p; /^ /p; /^$/q" <patch >subject && + test_cmp expect subject +' + test_done diff --git a/t/t4031-diff-rewrite-binary.sh b/t/t4031-diff-rewrite-binary.sh index 7e7b307a24..7d7470f21b 100755 --- a/t/t4031-diff-rewrite-binary.sh +++ b/t/t4031-diff-rewrite-binary.sh @@ -44,6 +44,13 @@ test_expect_success 'rewrite diff can show binary patch' ' grep "GIT binary patch" diff ' +test_expect_success 'rewrite diff --stat shows binary changes' ' + git diff -B --stat --summary >diff && + grep "Bin" diff && + grep "0 insertions.*0 deletions" diff && + grep " rewrite file" diff +' + { echo "#!$SHELL_PATH" cat <<'EOF' diff --git a/t/t4040-whitespace-status.sh b/t/t4040-whitespace-status.sh index a30b03bcf2..abc49348b1 100755 --- a/t/t4040-whitespace-status.sh +++ b/t/t4040-whitespace-status.sh @@ -60,4 +60,11 @@ test_expect_success 'diff-files -b -p --exit-code' ' git diff-files -b -p --exit-code ' +test_expect_success 'diff-files --diff-filter --quiet' ' + git reset --hard && + rm a/d && + echo x >>b/e && + test_must_fail git diff-files --diff-filter=M --quiet +' + test_done diff --git a/t/t4204-patch-id.sh b/t/t4204-patch-id.sh index 68e2652814..d2c930de87 100755 --- a/t/t4204-patch-id.sh +++ b/t/t4204-patch-id.sh @@ -63,4 +63,40 @@ test_expect_success 'patch-id supports git-format-patch MIME output' ' test_cmp patch-id_master patch-id_same ' +cat >nonl <<\EOF +diff --git i/a w/a +index e69de29..2e65efe 100644 +--- i/a ++++ w/a +@@ -0,0 +1 @@ ++a +\ No newline at end of file +diff --git i/b w/b +index e69de29..6178079 100644 +--- i/b ++++ w/b +@@ -0,0 +1 @@ ++b +EOF + +cat >withnl <<\EOF +diff --git i/a w/a +index e69de29..7898192 100644 +--- i/a ++++ w/a +@@ -0,0 +1 @@ ++a +diff --git i/b w/b +index e69de29..6178079 100644 +--- i/b ++++ w/b +@@ -0,0 +1 @@ ++b +EOF + +test_expect_success 'patch-id handles no-nl-at-eof markers' ' + cat nonl | calc_patch_id nonl && + cat withnl | calc_patch_id withnl && + test_cmp patch-id_nonl patch-id_withnl +' test_done diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index e2ed13dba2..d645328609 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -14,7 +14,8 @@ add_blob() { BLOB=$(echo aleph_0 | git hash-object -w --stdin) && BLOB_FILE=.git/objects/$(echo $BLOB | sed "s/^../&\//") && test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && - test -f $BLOB_FILE + test -f $BLOB_FILE && + test-chmtime =+0 $BLOB_FILE } test_expect_success setup ' diff --git a/t/t5501-fetch-push-alternates.sh b/t/t5501-fetch-push-alternates.sh new file mode 100755 index 0000000000..b5ced8483a --- /dev/null +++ b/t/t5501-fetch-push-alternates.sh @@ -0,0 +1,66 @@ +#!/bin/sh + +test_description='fetch/push involving alternates' +. ./test-lib.sh + +count_objects () { + loose=0 inpack=0 + eval "$( + git count-objects -v | + sed -n -e 's/^count: \(.*\)/loose=\1/p' \ + -e 's/^in-pack: \(.*\)/inpack=\1/p' + )" && + echo $(( $loose + $inpack )) +} + + +test_expect_success setup ' + ( + git init original && + cd original && + i=0 && + while test $i -le 100 + do + echo "$i" >count && + git add count && + git commit -m "$i" || exit + i=$(($i + 1)) + done + ) && + ( + git clone --reference=original "file:///$(pwd)/original" one && + cd one && + echo Z >count && + git add count && + git commit -m Z && + count_objects >../one.count + ) && + A=$(pwd)/original/.git/objects && + git init receiver && + echo "$A" >receiver/.git/objects/info/alternates && + git init fetcher && + echo "$A" >fetcher/.git/objects/info/alternates +' + +test_expect_success 'pushing into a repository with the same alternate' ' + ( + cd one && + git push ../receiver master:refs/heads/it + ) && + ( + cd receiver && + count_objects >../receiver.count + ) && + test_cmp one.count receiver.count +' + +test_expect_success 'fetching from a repository with the same alternate' ' + ( + cd fetcher && + git fetch ../one master:refs/heads/it && + count_objects >../fetcher.count + ) && + test_cmp one.count fetcher.count +' + +test_done diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index d189add2d0..4e69c907d8 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -304,6 +304,84 @@ test_expect_success 'add --mirror && prune' ' git rev-parse --verify refs/heads/side) ' +test_expect_success 'add --mirror=fetch' ' + mkdir mirror-fetch && + git init mirror-fetch/parent && + (cd mirror-fetch/parent && + test_commit one) && + git init --bare mirror-fetch/child && + (cd mirror-fetch/child && + git remote add --mirror=fetch -f parent ../parent) +' + +test_expect_success 'fetch mirrors act as mirrors during fetch' ' + (cd mirror-fetch/parent && + git branch new && + git branch -m master renamed + ) && + (cd mirror-fetch/child && + git fetch parent && + git rev-parse --verify refs/heads/new && + git rev-parse --verify refs/heads/renamed + ) +' + +test_expect_success 'fetch mirrors can prune' ' + (cd mirror-fetch/child && + git remote prune parent && + test_must_fail git rev-parse --verify refs/heads/master + ) +' + +test_expect_success 'fetch mirrors do not act as mirrors during push' ' + (cd mirror-fetch/parent && + git checkout HEAD^0 + ) && + (cd mirror-fetch/child && + git branch -m renamed renamed2 && + git push parent + ) && + (cd mirror-fetch/parent && + git rev-parse --verify renamed && + test_must_fail git rev-parse --verify refs/heads/renamed2 + ) +' + +test_expect_success 'add --mirror=push' ' + mkdir mirror-push && + git init --bare mirror-push/public && + git init mirror-push/private && + (cd mirror-push/private && + test_commit one && + git remote add --mirror=push public ../public + ) +' + +test_expect_success 'push mirrors act as mirrors during push' ' + (cd mirror-push/private && + git branch new && + git branch -m master renamed && + git push public + ) && + (cd mirror-push/private && + git rev-parse --verify refs/heads/new && + git rev-parse --verify refs/heads/renamed && + test_must_fail git rev-parse --verify refs/heads/master + ) +' + +test_expect_success 'push mirrors do not act as mirrors during fetch' ' + (cd mirror-push/public && + git branch -m renamed renamed2 && + git symbolic-ref HEAD refs/heads/renamed2 + ) && + (cd mirror-push/private && + git fetch public && + git rev-parse --verify refs/heads/renamed && + test_must_fail git rev-parse --verify refs/heads/renamed2 + ) +' + test_expect_success 'add alt && prune' ' (mkdir alttst && cd alttst && diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index 0470a81be0..0e5eb678ce 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -46,6 +46,17 @@ test_expect_success 'pulling into void using master:master' ' test_cmp file cloned-uho/file ' +test_expect_success 'pulling into void does not overwrite untracked files' ' + git init cloned-untracked && + ( + cd cloned-untracked && + echo untracked >file && + test_must_fail git pull .. master && + echo untracked >expect && + test_cmp expect file + ) +' + test_expect_success 'test . as a remote' ' git branch copy master && diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index a5f458533f..af78e21ba9 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -66,7 +66,10 @@ test_expect_success "fetch --recurse-submodules recurses into submodules" ' ( cd downstream && git fetch --recurse-submodules >../actual.out 2>../actual.err - ) && + ) +' + +test_expect_success C_LOCALE_OUTPUT "fetch --recurse-submodules recurses into submodules: output" ' test_cmp expect.out actual.out && test_cmp expect.err actual.err ' @@ -95,7 +98,10 @@ test_expect_success "using fetchRecurseSubmodules=true in .gitmodules recurses i cd downstream && git config -f .gitmodules submodule.submodule.fetchRecurseSubmodules true && git fetch >../actual.out 2>../actual.err - ) && + ) +' + +test_expect_success C_LOCALE_OUTPUT "using fetchRecurseSubmodules=true in .gitmodules recurses into submodules" ' test_cmp expect.out actual.out && test_cmp expect.err actual.err ' @@ -126,7 +132,10 @@ test_expect_success "--recurse-submodules overrides fetchRecurseSubmodules setti git fetch --recurse-submodules >../actual.out 2>../actual.err && git config --unset -f .gitmodules submodule.submodule.fetchRecurseSubmodules && git config --unset submodule.submodule.fetchRecurseSubmodules - ) && + ) +' + +test_expect_success C_LOCALE_OUTPUT "--recurse-submodules overrides fetchRecurseSubmodules setting from .git/config: output" ' test_cmp expect.out actual.out && test_cmp expect.err actual.err ' @@ -145,13 +154,22 @@ test_expect_success "--dry-run propagates to submodules" ' ( cd downstream && git fetch --recurse-submodules --dry-run >../actual.out 2>../actual.err - ) && + ) +' + +test_expect_success C_LOCALE_OUTPUT "--dry-run propagates to submodules: output" ' test_cmp expect.out actual.out && - test_cmp expect.err actual.err && + test_cmp expect.err actual.err +' + +test_expect_success "Without --dry-run propagates to submodules" ' ( cd downstream && git fetch --recurse-submodules >../actual.out 2>../actual.err - ) && + ) +' + +test_expect_success C_LOCALE_OUTPUT "Without --dry-run propagates to submodules: output" ' test_cmp expect.out actual.out && test_cmp expect.err actual.err ' @@ -162,7 +180,10 @@ test_expect_success "recurseSubmodules=true propagates into submodules" ' cd downstream && git config fetch.recurseSubmodules true git fetch >../actual.out 2>../actual.err - ) && + ) +' + +test_expect_success C_LOCALE_OUTPUT "recurseSubmodules=true propagates into submodules: output" ' test_cmp expect.out actual.out && test_cmp expect.err actual.err ' @@ -176,7 +197,10 @@ test_expect_success "--recurse-submodules overrides config in submodule" ' git config fetch.recurseSubmodules false ) && git fetch --recurse-submodules >../actual.out 2>../actual.err - ) && + ) +' + +test_expect_success C_LOCALE_OUTPUT "--recurse-submodules overrides config in submodule: output" ' test_cmp expect.out actual.out && test_cmp expect.err actual.err ' @@ -192,4 +216,259 @@ test_expect_success "--no-recurse-submodules overrides config setting" ' ! test -s actual.err ' +test_expect_success "Recursion doesn't happen when no new commits are fetched in the superproject" ' + ( + cd downstream && + ( + cd submodule && + git config --unset fetch.recurseSubmodules + ) && + git config --unset fetch.recurseSubmodules + git fetch >../actual.out 2>../actual.err + ) && + ! test -s actual.out && + ! test -s actual.err +' + +test_expect_success "Recursion stops when no new submodule commits are fetched" ' + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "Fetching submodule submodule" > expect.out.sub && + echo "From $pwd/." > expect.err.sub && + echo " $head1..$head2 master -> origin/master" >> expect.err.sub + head -2 expect.err >> expect.err.sub && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err + ) && + test_cmp expect.err.sub actual.err && + test_cmp expect.out.sub actual.out +' + +test_expect_success "Recursion doesn't happen when new superproject commits don't change any submodules" ' + add_upstream_commit && + head1=$(git rev-parse --short HEAD) && + echo a > file && + git add file && + git commit -m "new file" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.file && + echo " $head1..$head2 master -> origin/master" >> expect.err.file && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err + ) && + ! test -s actual.out && + test_cmp expect.err.file actual.err +' + +test_expect_success "Recursion picks up config in submodule" ' + ( + cd downstream && + git fetch --recurse-submodules && + ( + cd submodule && + git config fetch.recurseSubmodules true + ) + ) && + add_upstream_commit && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.sub && + echo " $head1..$head2 master -> origin/master" >> expect.err.sub && + cat expect.err >> expect.err.sub && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err && + ( + cd submodule && + git config --unset fetch.recurseSubmodules + ) + ) && + test_cmp expect.err.sub actual.err && + test_cmp expect.out actual.out +' + +test_expect_success "Recursion picks up all submodules when necessary" ' + add_upstream_commit && + ( + cd submodule && + ( + cd deepsubmodule && + git fetch && + git checkout -q FETCH_HEAD + ) && + head1=$(git rev-parse --short HEAD^) && + git add deepsubmodule && + git commit -m "new deepsubmodule" + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/submodule" > ../expect.err.sub && + echo " $head1..$head2 master -> origin/master" >> ../expect.err.sub + ) && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.2 && + echo " $head1..$head2 master -> origin/master" >> expect.err.2 && + cat expect.err.sub >> expect.err.2 && + tail -2 expect.err >> expect.err.2 && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err + ) && + test_cmp expect.err.2 actual.err && + test_cmp expect.out actual.out +' + +test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no new commits are fetched in the superproject (and ignores config)" ' + add_upstream_commit && + ( + cd submodule && + ( + cd deepsubmodule && + git fetch && + git checkout -q FETCH_HEAD + ) && + head1=$(git rev-parse --short HEAD^) && + git add deepsubmodule && + git commit -m "new deepsubmodule" + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/submodule" > ../expect.err.sub && + echo " $head1..$head2 master -> origin/master" >> ../expect.err.sub + ) && + ( + cd downstream && + git config fetch.recurseSubmodules true && + git fetch --recurse-submodules=on-demand >../actual.out 2>../actual.err && + git config --unset fetch.recurseSubmodules + ) && + ! test -s actual.out && + ! test -s actual.err +' + +test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necessary (and ignores config)" ' + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + tail -2 expect.err > expect.err.deepsub && + echo "From $pwd/." > expect.err && + echo " $head1..$head2 master -> origin/master" >> expect.err + cat expect.err.sub >> expect.err && + cat expect.err.deepsub >> expect.err && + ( + cd downstream && + git config fetch.recurseSubmodules false && + ( + cd submodule && + git config -f .gitmodules submodule.deepsubmodule.fetchRecursive false + ) && + git fetch --recurse-submodules=on-demand >../actual.out 2>../actual.err && + git config --unset fetch.recurseSubmodules + ( + cd submodule && + git config --unset -f .gitmodules submodule.deepsubmodule.fetchRecursive + ) + ) && + test_cmp expect.out actual.out && + test_cmp expect.err actual.err +' + +test_expect_success "'--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)" ' + add_upstream_commit && + head1=$(git rev-parse --short HEAD) && + echo a >> file && + git add file && + git commit -m "new file" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.file && + echo " $head1..$head2 master -> origin/master" >> expect.err.file && + ( + cd downstream && + git fetch --recurse-submodules=on-demand >../actual.out 2>../actual.err + ) && + ! test -s actual.out && + test_cmp expect.err.file actual.err +' + +test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config" ' + ( + cd downstream && + git fetch --recurse-submodules + ) && + add_upstream_commit && + git config --global fetch.recurseSubmodules false && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.2 && + echo " $head1..$head2 master -> origin/master" >> expect.err.2 + head -2 expect.err >> expect.err.2 && + ( + cd downstream && + git config fetch.recurseSubmodules on-demand && + git fetch >../actual.out 2>../actual.err + ) && + git config --global --unset fetch.recurseSubmodules && + ( + cd downstream && + git config --unset fetch.recurseSubmodules + ) && + test_cmp expect.out.sub actual.out && + test_cmp expect.err.2 actual.err +' + +test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' overrides fetch.recurseSubmodules" ' + ( + cd downstream && + git fetch --recurse-submodules + ) && + add_upstream_commit && + git config fetch.recurseSubmodules false && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.2 && + echo " $head1..$head2 master -> origin/master" >> expect.err.2 + head -2 expect.err >> expect.err.2 && + ( + cd downstream && + git config submodule.submodule.fetchRecurseSubmodules on-demand && + git fetch >../actual.out 2>../actual.err + ) && + git config --unset fetch.recurseSubmodules && + ( + cd downstream && + git config --unset submodule.submodule.fetchRecurseSubmodules + ) && + test_cmp expect.out.sub actual.out && + test_cmp expect.err.2 actual.err +' + +test_expect_success "don't fetch submodule when newly recorded commits are already present" ' + ( + cd submodule && + git checkout -q HEAD^^ + ) && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "submodule rewound" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err && + echo " $head1..$head2 master -> origin/master" >> expect.err && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err + ) && + ! test -s actual.out && + test_cmp expect.err actual.err +' + test_done diff --git a/t/t5541-http-push.sh b/t/t5541-http-push.sh index b0c2a2c3ae..0492877d51 100755 --- a/t/t5541-http-push.sh +++ b/t/t5541-http-push.sh @@ -128,11 +128,14 @@ test_expect_success 'push fails for non-fast-forward refs unmatched by remote he # push master too; this ensures there is at least one '"'push'"' command to # the remote helper and triggers interaction with the helper. - test_must_fail git push -v origin +master master:retsam >output 2>&1 && + test_must_fail git push -v origin +master master:retsam >output 2>&1' +test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: remote output' ' grep "^ + [a-f0-9]*\.\.\.[a-f0-9]* *master -> master (forced update)$" output && - grep "^ ! \[rejected\] *master -> retsam (non-fast-forward)$" output && + grep "^ ! \[rejected\] *master -> retsam (non-fast-forward)$" output +' +test_expect_success C_LOCALE_OUTPUT 'push fails for non-fast-forward refs unmatched by remote helper: our output' ' grep "To prevent you from losing history, non-fast-forward updates were rejected" \ output ' diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 987e0c8463..5a068b21e4 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -31,7 +31,7 @@ test_expect_success 'clone with excess parameters (2)' ' ' -test_expect_success 'output from clone' ' +test_expect_success C_LOCALE_OUTPUT 'output from clone' ' rm -fr dst && git clone -n "file://$(pwd)/src" dst >output && test $(grep Clon output | wc -l) = 1 @@ -164,7 +164,6 @@ test_expect_success 'clone a void' ' test_expect_success 'clone respects global branch.autosetuprebase' ' ( test_config="$HOME/.gitconfig" && - unset GIT_CONFIG_NOGLOBAL && git config -f "$test_config" branch.autosetuprebase remote && rm -fr dst && git clone src dst && @@ -192,4 +191,17 @@ test_expect_success 'do not respect url-encoding of non-url path' ' git clone x+y xy-regular ' +test_expect_success 'clone separate gitdir' ' + rm -rf dst && + git clone --separate-git-dir realgitdir src dst && + echo "gitdir: `pwd`/realgitdir" >expected && + test_cmp expected dst/.git && + test -d realgitdir/refs +' + +test_expect_success 'clone separate gitdir where target already exists' ' + rm -rf dst && + test_must_fail git clone --separate-git-dir realgitdir src dst +' + test_done diff --git a/t/t5701-clone-local.sh b/t/t5701-clone-local.sh index 0f4d487be3..6972258b27 100755 --- a/t/t5701-clone-local.sh +++ b/t/t5701-clone-local.sh @@ -144,4 +144,17 @@ test_expect_success 'clone empty repository, and then push should not segfault.' test_must_fail git push) ' +test_expect_success 'cloning non-existent directory fails' ' + cd "$D" && + rm -rf does-not-exist && + test_must_fail git clone does-not-exist +' + +test_expect_success 'cloning non-git directory fails' ' + cd "$D" && + rm -rf not-a-git-repo not-a-git-repo-clone && + mkdir not-a-git-repo && + test_must_fail git clone not-a-git-repo not-a-git-repo-clone +' + test_done diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh new file mode 100755 index 0000000000..b10685af4e --- /dev/null +++ b/t/t6000-rev-list-misc.sh @@ -0,0 +1,51 @@ +#!/bin/sh + +test_description='miscellaneous rev-list tests' + +. ./test-lib.sh + +test_expect_success setup ' + echo content1 >wanted_file && + echo content2 >unwanted_file && + git add wanted_file unwanted_file && + git commit -m one +' + +test_expect_success 'rev-list --objects heeds pathspecs' ' + git rev-list --objects HEAD -- wanted_file >output && + grep wanted_file output && + ! grep unwanted_file output +' + +test_expect_success 'rev-list --objects with pathspecs and deeper paths' ' + mkdir foo && + >foo/file && + git add foo/file && + git commit -m two && + + git rev-list --objects HEAD -- foo >output && + grep foo/file output && + + git rev-list --objects HEAD -- foo/file >output && + grep foo/file output && + ! grep unwanted_file output +' + +test_expect_success 'rev-list --objects with pathspecs and copied files' ' + git checkout --orphan junio-testcase && + git rm -rf . && + + mkdir two && + echo frotz >one && + cp one two/three && + git add one two/three && + test_tick && + git commit -m that && + + ONE=$(git rev-parse HEAD:one) + git rev-list --objects HEAD two >output && + grep "$ONE two/three" output && + ! grep one output +' + +test_done diff --git a/t/t6004-rev-list-path-optim.sh b/t/t6004-rev-list-path-optim.sh index 5dabf1c5e3..3e8c42ee0b 100755 --- a/t/t6004-rev-list-path-optim.sh +++ b/t/t6004-rev-list-path-optim.sh @@ -1,51 +1,96 @@ #!/bin/sh -test_description='git rev-list trivial path optimization test' +test_description='git rev-list trivial path optimization test + + d/z1 + b0 b1 + o------------------------*----o master + / / + o---------o----o----o----o side + a0 c0 c1 a1 c2 + d/f0 d/f1 + d/z0 + +' . ./test-lib.sh test_expect_success setup ' -echo Hello > a && -git add a && -git commit -m "Initial commit" a && -initial=$(git rev-parse --verify HEAD) + echo Hello >a && + mkdir d && + echo World >d/f && + echo World >d/z && + git add a d && + test_tick && + git commit -m "Initial commit" && + git rev-parse --verify HEAD && + git tag initial ' test_expect_success path-optimization ' - commit=$(echo "Unchanged tree" | git commit-tree "HEAD^{tree}" -p HEAD) && - test $(git rev-list $commit | wc -l) = 2 && - test $(git rev-list $commit -- . | wc -l) = 1 + test_tick && + commit=$(echo "Unchanged tree" | git commit-tree "HEAD^{tree}" -p HEAD) && + test $(git rev-list $commit | wc -l) = 2 && + test $(git rev-list $commit -- . | wc -l) = 1 ' test_expect_success 'further setup' ' git checkout -b side && echo Irrelevant >c && - git add c && + echo Irrelevant >d/f && + git add c d/f && + test_tick && git commit -m "Side makes an irrelevant commit" && + git tag side_c0 && echo "More Irrelevancy" >c && git add c && + test_tick && git commit -m "Side makes another irrelevant commit" && echo Bye >a && git add a && + test_tick && git commit -m "Side touches a" && - side=$(git rev-parse --verify HEAD) && + git tag side_a1 && echo "Yet more Irrelevancy" >c && git add c && + test_tick && git commit -m "Side makes yet another irrelevant commit" && git checkout master && echo Another >b && - git add b && + echo Munged >d/z && + git add b d/z && + test_tick && git commit -m "Master touches b" && + git tag master_b0 && git merge side && echo Touched >b && git add b && + test_tick && git commit -m "Master touches b again" ' test_expect_success 'path optimization 2' ' - ( echo "$side"; echo "$initial" ) >expected && + git rev-parse side_a1 initial >expected && git rev-list HEAD -- a >actual && test_cmp expected actual ' +test_expect_success 'pathspec with leading path' ' + git rev-parse master^ master_b0 side_c0 initial >expected && + git rev-list HEAD -- d >actual && + test_cmp expected actual +' + +test_expect_success 'pathspec with glob (1)' ' + git rev-parse master^ master_b0 side_c0 initial >expected && + git rev-list HEAD -- "d/*" >actual && + test_cmp expected actual +' + +test_expect_success 'pathspec with glob (2)' ' + git rev-parse side_c0 initial >expected && + git rev-list HEAD -- "d/[a-m]*" >actual && + test_cmp expected actual +' + test_done diff --git a/t/t6007-rev-list-cherry-pick-file.sh b/t/t6007-rev-list-cherry-pick-file.sh index b565638e92..cacf3de6c9 100755 --- a/t/t6007-rev-list-cherry-pick-file.sh +++ b/t/t6007-rev-list-cherry-pick-file.sh @@ -4,13 +4,14 @@ test_description='test git rev-list --cherry-pick -- file' . ./test-lib.sh -# A---B +# A---B---D---F # \ # \ -# C +# C---E # # B changes a file foo.c, adding a line of text. C changes foo.c as # well as bar.c, but the change in foo.c was identical to change B. +# D and C change bar in the same way, E and F differently. test_expect_success setup ' echo Hallo > foo && @@ -25,11 +26,26 @@ test_expect_success setup ' test_tick && git commit -m "C" && git tag C && + echo Dello > bar && + git add bar && + test_tick && + git commit -m "E" && + git tag E && git checkout master && git checkout branch foo && test_tick && git commit -m "B" && - git tag B + git tag B && + echo Cello > bar && + git add bar && + test_tick && + git commit -m "D" && + git tag D && + echo Nello > bar && + git add bar && + test_tick && + git commit -m "F" && + git tag F ' cat >expect <<EOF @@ -53,8 +69,92 @@ test_expect_success '--cherry-pick foo comes up empty' ' test -z "$(git rev-list --left-right --cherry-pick B...C -- foo)" ' +cat >expect <<EOF +>tags/C +EOF + test_expect_success '--cherry-pick bar does not come up empty' ' - ! test -z "$(git rev-list --left-right --cherry-pick B...C -- bar)" + git rev-list --left-right --cherry-pick B...C -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +test_expect_success 'bar does not come up empty' ' + git rev-list --left-right B...C -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF +<tags/F +>tags/E +EOF + +test_expect_success '--cherry-pick bar does not come up empty (II)' ' + git rev-list --left-right --cherry-pick F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF ++tags/F +=tags/D ++tags/E +=tags/C +EOF + +test_expect_success '--cherry-mark' ' + git rev-list --cherry-mark F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF +<tags/F +=tags/D +>tags/E +=tags/C +EOF + +test_expect_success '--cherry-mark --left-right' ' + git rev-list --cherry-mark --left-right F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF +tags/E +EOF + +test_expect_success '--cherry-pick --right-only' ' + git rev-list --cherry-pick --right-only F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +test_expect_success '--cherry-pick --left-only' ' + git rev-list --cherry-pick --left-only E...F -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF ++tags/E +=tags/C +EOF + +test_expect_success '--cherry' ' + git rev-list --cherry F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect ' test_expect_success '--cherry-pick with independent, but identical branches' ' @@ -75,11 +175,8 @@ cat >expect <<EOF 1 2 EOF -# Insert an extra commit to break the symmetry test_expect_success '--count --left-right' ' - git checkout branch && - test_commit D && - git rev-list --count --left-right B...D > actual && + git rev-list --count --left-right C...D > actual && test_cmp expect actual ' diff --git a/t/t6009-rev-list-parent.sh b/t/t6009-rev-list-parent.sh index 52f7b277ce..30507407ff 100755 --- a/t/t6009-rev-list-parent.sh +++ b/t/t6009-rev-list-parent.sh @@ -1,14 +1,15 @@ #!/bin/sh -test_description='properly cull all ancestors' +test_description='ancestor culling and limiting by parent number' . ./test-lib.sh -commit () { - test_tick && - echo $1 >file && - git commit -a -m $1 && - git tag $1 +check_revlist () { + rev_list_args="$1" && + shift && + git rev-parse "$@" >expect && + git rev-list $rev_list_args --all >actual && + test_cmp expect actual } test_expect_success setup ' @@ -16,13 +17,13 @@ test_expect_success setup ' touch file && git add file && - commit one && + test_commit one && test_tick=$(($test_tick - 2400)) && - commit two && - commit three && - commit four && + test_commit two && + test_commit three && + test_commit four && git log --pretty=oneline --abbrev-commit ' @@ -35,4 +36,101 @@ test_expect_success 'one is ancestor of others and should not be shown' ' ' +test_expect_success 'setup roots, merges and octopuses' ' + + git checkout --orphan newroot && + test_commit five && + git checkout -b sidebranch two && + test_commit six && + git checkout -b anotherbranch three && + test_commit seven && + git checkout -b yetanotherbranch four && + test_commit eight && + git checkout master && + test_merge normalmerge newroot && + test_tick && + git merge -m tripus sidebranch anotherbranch && + git tag tripus && + git checkout -b tetrabranch normalmerge && + test_tick && + git merge -m tetrapus sidebranch anotherbranch yetanotherbranch && + git tag tetrapus && + git checkout master +' + +test_expect_success 'rev-list roots' ' + + check_revlist "--max-parents=0" one five +' + +test_expect_success 'rev-list no merges' ' + + check_revlist "--max-parents=1" one eight seven six five four three two && + check_revlist "--no-merges" one eight seven six five four three two +' + +test_expect_success 'rev-list no octopuses' ' + + check_revlist "--max-parents=2" one normalmerge eight seven six five four three two +' + +test_expect_success 'rev-list no roots' ' + + check_revlist "--min-parents=1" tetrapus tripus normalmerge eight seven six four three two +' + +test_expect_success 'rev-list merges' ' + + check_revlist "--min-parents=2" tetrapus tripus normalmerge && + check_revlist "--merges" tetrapus tripus normalmerge +' + +test_expect_success 'rev-list octopus' ' + + check_revlist "--min-parents=3" tetrapus tripus +' + +test_expect_success 'rev-list ordinary commits' ' + + check_revlist "--min-parents=1 --max-parents=1" eight seven six four three two +' + +test_expect_success 'rev-list --merges --no-merges yields empty set' ' + + check_revlist "--min-parents=2 --no-merges" && + check_revlist "--merges --no-merges" && + check_revlist "--no-merges --merges" +' + +test_expect_success 'rev-list override and infinities' ' + + check_revlist "--min-parents=2 --max-parents=1 --max-parents=3" tripus normalmerge && + check_revlist "--min-parents=1 --min-parents=2 --max-parents=7" tetrapus tripus normalmerge && + check_revlist "--min-parents=2 --max-parents=8" tetrapus tripus normalmerge && + check_revlist "--min-parents=2 --max-parents=-1" tetrapus tripus normalmerge && + check_revlist "--min-parents=2 --no-max-parents" tetrapus tripus normalmerge && + check_revlist "--max-parents=0 --min-parents=1 --no-min-parents" one five +' + +test_expect_success 'dodecapus' ' + + roots= && + for i in 1 2 3 4 5 6 7 8 9 10 11 + do + git checkout -b root$i five && + test_commit $i && + roots="$roots root$i" || + return + done && + git checkout master && + test_tick && + git merge -m dodecapus $roots && + git tag dodecapus && + + check_revlist "--min-parents=4" dodecapus tetrapus && + check_revlist "--min-parents=8" dodecapus && + check_revlist "--min-parents=12" dodecapus && + check_revlist "--min-parents=13" && + check_revlist "--min-parents=4 --max-parents=11" tetrapus +' test_done diff --git a/t/t6035-merge-dir-to-symlink.sh b/t/t6035-merge-dir-to-symlink.sh index 92e02d5d77..2599ae50eb 100755 --- a/t/t6035-merge-dir-to-symlink.sh +++ b/t/t6035-merge-dir-to-symlink.sh @@ -17,13 +17,21 @@ test_expect_success SYMLINKS 'create a commit where dir a/b changed to symlink' git commit -m "dir to symlink" ' -test_expect_success SYMLINKS 'keep a/b-2/c/d across checkout' ' +test_expect_success SYMLINKS 'checkout does not clobber untracked symlink' ' git checkout HEAD^0 && git reset --hard master && git rm --cached a/b && git commit -m "untracked symlink remains" && - git checkout start^0 && - test -f a/b-2/c/d + test_must_fail git checkout start^0 +' + +test_expect_success SYMLINKS 'a/b-2/c/d is kept when clobbering symlink b' ' + git checkout HEAD^0 && + git reset --hard master && + git rm --cached a/b && + git commit -m "untracked symlink remains" && + git checkout -f start^0 && + test -f a/b-2/c/d ' test_expect_success SYMLINKS 'checkout should not have deleted a/b-2/c/d' ' diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index 1e0447f615..6c3719141a 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -42,7 +42,7 @@ b3 behind 1 b4 ahead 2 EOF -test_expect_success 'branch -v' ' +test_expect_success C_LOCALE_OUTPUT 'branch -v' ' ( cd test && git branch -v @@ -74,20 +74,20 @@ test_expect_success 'status' ' grep "have 1 and 1 different" actual ' -test_expect_success 'status when tracking lightweight tags' ' +test_expect_success 'fail to track lightweight tags' ' git checkout master && git tag light && - git branch --track lighttrack light >actual && - grep "set up to track" actual && - git checkout lighttrack + test_must_fail git branch --track lighttrack light >actual && + test_must_fail grep "set up to track" actual && + test_must_fail git checkout lighttrack ' -test_expect_success 'status when tracking annotated tags' ' +test_expect_success 'fail to track annotated tags' ' git checkout master && git tag -m heavy heavy && - git branch --track heavytrack heavy >actual && - grep "set up to track" actual && - git checkout heavytrack + test_must_fail git branch --track heavytrack heavy >actual && + test_must_fail grep "set up to track" actual && + test_must_fail git checkout heavytrack ' test_expect_success 'setup tracking with branch --set-upstream on existing branch' ' diff --git a/t/t6110-rev-list-sparse.sh b/t/t6110-rev-list-sparse.sh new file mode 100755 index 0000000000..656ac7fe9d --- /dev/null +++ b/t/t6110-rev-list-sparse.sh @@ -0,0 +1,20 @@ +#!/bin/sh + +test_description='operations that cull histories in unusual ways' +. ./test-lib.sh + +test_expect_success setup ' + test_commit A && + test_commit B && + test_commit C && + git checkout -b side HEAD^ && + test_commit D && + test_commit E && + git merge master +' + +test_expect_success 'rev-list --first-parent --boundary' ' + git rev-list --first-parent --boundary HEAD^.. +' + +test_done diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index 876d1ab743..1826996245 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -123,7 +123,7 @@ cat - >err.expect <<EOF warning: tag 'A' is really 'Q' here EOF check_describe A-* HEAD -test_expect_success 'warning was displayed for Q' ' +test_expect_success C_LOCALE_OUTPUT 'warning was displayed for Q' ' test_cmp err.expect err.actual ' test_expect_success 'rename tag Q back to A' ' diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 3e7baaf89f..1dedfd0c83 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1121,6 +1121,7 @@ test_expect_success \ ' test_expect_success \ + C_LOCALE_OUTPUT \ 'message in editor has initial comment: first line' ' # check the first line --- should be empty echo >first.expect && diff --git a/t/t7012-skip-worktree-writing.sh b/t/t7012-skip-worktree-writing.sh index 582d0b54f1..14fcb1c7f5 100755 --- a/t/t7012-skip-worktree-writing.sh +++ b/t/t7012-skip-worktree-writing.sh @@ -124,13 +124,13 @@ cat >expected <<EOF Would remove expected Would remove result EOF -test_expect_success 'git-clean, absent case' ' +test_expect_success C_LOCALE_OUTPUT 'git-clean, absent case' ' setup_absent && git clean -n > result && test_cmp expected result ' -test_expect_success 'git-clean, dirty case' ' +test_expect_success C_LOCALE_OUTPUT 'git-clean, dirty case' ' setup_dirty && git clean -n > result && test_cmp expected result diff --git a/t/t7060-wtstatus.sh b/t/t7060-wtstatus.sh index fcac472598..b4fcc86a10 100755 --- a/t/t7060-wtstatus.sh +++ b/t/t7060-wtstatus.sh @@ -38,7 +38,7 @@ cat >expect <<EOF no changes added to commit (use "git add" and/or "git commit -a") EOF -test_expect_success 'M/D conflict does not segfault' ' +test_expect_success C_LOCALE_OUTPUT 'M/D conflict does not segfault' ' mkdir mdconflict && ( cd mdconflict && diff --git a/t/t7102-reset.sh b/t/t7102-reset.sh index b8cf2603a1..7be2ff38fc 100755 --- a/t/t7102-reset.sh +++ b/t/t7102-reset.sh @@ -423,7 +423,7 @@ Unstaged changes after reset: M file2 EOF -test_expect_success '--mixed refreshes the index' ' +test_expect_success C_LOCALE_OUTPUT '--mixed refreshes the index' ' echo 123 >> file2 && git reset --mixed HEAD > output && test_cmp expect output diff --git a/t/t7110-reset-merge.sh b/t/t7110-reset-merge.sh index 70cdd8e618..b42820ad69 100755 --- a/t/t7110-reset-merge.sh +++ b/t/t7110-reset-merge.sh @@ -233,7 +233,7 @@ test_expect_success '"reset --merge HEAD^" is ok with pending merge' ' # working index HEAD target working index HEAD # ---------------------------------------------------- # file1: X U B C --keep (disallowed) -test_expect_success '"reset --keep HEAD^" fails with pending merge' ' +test_expect_success C_LOCALE_OUTPUT '"reset --keep HEAD^" fails with pending merge' ' git reset --hard third && test_must_fail git merge branch1 && test_must_fail git reset --keep HEAD^ 2>err.log && @@ -259,7 +259,7 @@ test_expect_success '"reset --merge HEAD" is ok with pending merge' ' # working index HEAD target working index HEAD # ---------------------------------------------------- # file1: X U B B --keep (disallowed) -test_expect_success '"reset --keep HEAD" fails with pending merge' ' +test_expect_success C_LOCALE_OUTPUT '"reset --keep HEAD" fails with pending merge' ' git reset --hard third && test_must_fail git merge branch1 && test_must_fail git reset --keep HEAD 2>err.log && @@ -280,7 +280,7 @@ test_expect_success '--merge is ok with added/deleted merge' ' git diff --exit-code --cached ' -test_expect_success '--keep fails with added/deleted merge' ' +test_expect_success C_LOCALE_OUTPUT '--keep fails with added/deleted merge' ' git reset --hard third && rm -f file2 && test_must_fail git merge branch3 && diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 1337fa5a22..37ed0931d9 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -223,7 +223,7 @@ test_expect_success 'checkout --merge --conflict=diff3 <branch>' ' test_cmp two expect ' -test_expect_success 'checkout to detach HEAD (with advice declined)' ' +test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD (with advice declined)' ' git config advice.detachedHead false && git checkout -f renamer && git clean -f && @@ -242,7 +242,7 @@ test_expect_success 'checkout to detach HEAD (with advice declined)' ' fi ' -test_expect_success 'checkout to detach HEAD' ' +test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD' ' git config advice.detachedHead true && git checkout -f renamer && git clean -f && git checkout renamer^ 2>messages && @@ -260,7 +260,7 @@ test_expect_success 'checkout to detach HEAD' ' fi ' -test_expect_success 'checkout to detach HEAD with branchname^' ' +test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD with branchname^' ' git checkout -f master && git clean -f && git checkout renamer^ && @@ -276,7 +276,7 @@ test_expect_success 'checkout to detach HEAD with branchname^' ' fi ' -test_expect_success 'checkout to detach HEAD with :/message' ' +test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD with :/message' ' git checkout -f master && git clean -f && git checkout ":/Initial" && @@ -292,7 +292,7 @@ test_expect_success 'checkout to detach HEAD with :/message' ' fi ' -test_expect_success 'checkout to detach HEAD with HEAD^0' ' +test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD with HEAD^0' ' git checkout -f master && git clean -f && git checkout HEAD^0 && @@ -408,6 +408,15 @@ test_expect_success 'checkout w/--track from non-branch HEAD fails' ' test "z$(git rev-parse master^0)" = "z$(git rev-parse HEAD)" ' +test_expect_success 'checkout w/--track from tag fails' ' + git checkout master^0 && + test_must_fail git symbolic-ref HEAD && + test_must_fail git checkout --track -b track frotz && + test_must_fail git rev-parse --verify track && + test_must_fail git symbolic-ref HEAD && + test "z$(git rev-parse master^0)" = "z$(git rev-parse HEAD)" +' + test_expect_success 'detach a symbolic link HEAD' ' git checkout master && git config --bool core.prefersymlinkrefs yes && @@ -423,7 +432,6 @@ test_expect_success 'detach a symbolic link HEAD' ' test_expect_success \ 'checkout with --track fakes a sensible -b <name>' ' git update-ref refs/remotes/origin/koala/bear renamer && - git update-ref refs/new/koala/bear renamer && git checkout --track origin/koala/bear && test "refs/heads/koala/bear" = "$(git symbolic-ref HEAD)" && @@ -439,12 +447,6 @@ test_expect_success \ git checkout --track remotes/origin/koala/bear && test "refs/heads/koala/bear" = "$(git symbolic-ref HEAD)" && - test "$(git rev-parse HEAD)" = "$(git rev-parse renamer)" && - - git checkout master && git branch -D koala/bear && - - git checkout --track refs/new/koala/bear && - test "refs/heads/koala/bear" = "$(git symbolic-ref HEAD)" && test "$(git rev-parse HEAD)" = "$(git rev-parse renamer)" ' diff --git a/t/t7300-clean.sh b/t/t7300-clean.sh index 02f67b73b7..7e1be44402 100755 --- a/t/t7300-clean.sh +++ b/t/t7300-clean.sh @@ -110,7 +110,7 @@ test_expect_success 'git clean with prefix' ' ' -test_expect_success 'git clean with relative prefix' ' +test_expect_success C_LOCALE_OUTPUT 'git clean with relative prefix' ' mkdir -p build docs && touch a.out src/part3.c docs/manual.txt obj.o build/lib.so && @@ -125,7 +125,7 @@ test_expect_success 'git clean with relative prefix' ' } ' -test_expect_success 'git clean with absolute path' ' +test_expect_success C_LOCALE_OUTPUT 'git clean with absolute path' ' mkdir -p build docs && touch a.out src/part3.c docs/manual.txt obj.o build/lib.so && @@ -377,7 +377,7 @@ test_expect_success 'clean.requireForce and -f' ' ' -test_expect_success 'core.excludesfile' ' +test_expect_success C_LOCALE_OUTPUT 'core.excludesfile' ' echo excludes >excludes && echo included >included && diff --git a/t/t7403-submodule-sync.sh b/t/t7403-submodule-sync.sh index e5b19538b0..d600583cef 100755 --- a/t/t7403-submodule-sync.sh +++ b/t/t7403-submodule-sync.sh @@ -52,7 +52,7 @@ test_expect_success 'change submodule url' ' test_expect_success '"git submodule sync" should update submodule URLs' ' (cd super-clone && - git pull && + git pull --no-recurse-submodules && git submodule sync ) && test -d "$(git config -f super-clone/submodule/.git/config \ diff --git a/t/t7405-submodule-merge.sh b/t/t7405-submodule-merge.sh index 7e2e258950..a8fb30b792 100755 --- a/t/t7405-submodule-merge.sh +++ b/t/t7405-submodule-merge.sh @@ -56,11 +56,11 @@ test_expect_success setup ' # History setup # -# b -# / \ -# a d -# \ / -# c +# b +# / \ +# init -- a d +# \ \ / +# g c # # a in the main repository records to sub-a in the submodule and # analogous b and c. d should be automatically found by merging c into @@ -76,6 +76,8 @@ test_expect_success 'setup for merge search' ' git add file-a && git commit -m "sub-a" && git branch sub-a) && + git commit --allow-empty -m init && + git branch init && git add sub && git commit -m "a" && git branch a && @@ -101,7 +103,13 @@ test_expect_success 'setup for merge search' ' git checkout -b sub-d sub-b && git merge sub-c) && git commit -a -m "d" && - git branch test b) + git branch test b && + + git checkout -b g init && + (cd sub && + git checkout -b sub-g sub-c) && + git add sub && + git commit -a -m "g") ' test_expect_success 'merge with one side as a fast-forward of the other' ' @@ -176,6 +184,44 @@ test_expect_success 'merging should fail for changes that are backwards' ' test_must_fail git merge f) ' + +# Check that the conflicting submodule is detected when it is +# in the common ancestor. status should be 'U00...00" +test_expect_success 'git submodule status should display the merge conflict properly with merge base' ' + (cd merge-search && + cat >.gitmodules <<EOF && +[submodule "sub"] + path = sub + url = $TRASH_DIRECTORY/sub +EOF + cat >expect <<EOF && +U0000000000000000000000000000000000000000 sub +EOF + git submodule status > actual && + test_cmp expect actual && + git reset --hard) +' + +# Check that the conflicting submodule is detected when it is +# not in the common ancestor. status should be 'U00...00" +test_expect_success 'git submodule status should display the merge conflict properly without merge-base' ' + (cd merge-search && + git checkout -b test-no-merge-base g && + test_must_fail git merge b && + cat >.gitmodules <<EOF && +[submodule "sub"] + path = sub + url = $TRASH_DIRECTORY/sub +EOF + cat >expect <<EOF && +U0000000000000000000000000000000000000000 sub +EOF + git submodule status > actual && + test_cmp expect actual && + git reset --hard) +' + + test_expect_success 'merging with a modify/modify conflict between merge bases' ' git reset --hard HEAD && git checkout -b test2 c && diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index bfb4975e94..bf7c788735 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -74,6 +74,26 @@ test_expect_success 'submodule update detaching the HEAD ' ' ) ' +apos="'"; +test_expect_success 'submodule update does not fetch already present commits' ' + (cd submodule && + echo line3 >> file && + git add file && + test_tick && + git commit -m "upstream line3" + ) && + (cd super/submodule && + head=$(git rev-parse --verify HEAD) && + echo "Submodule path ${apos}submodule$apos: checked out $apos$head$apos" > ../../expected && + git reset --hard HEAD~1 + ) && + (cd super && + git submodule update > ../actual 2> ../actual.err + ) && + test_cmp expected actual && + ! test -s actual.err +' + test_expect_success 'submodule update --rebase staying on master' ' (cd super/submodule && git checkout master @@ -203,4 +223,56 @@ test_expect_success 'submodule init picks up merge' ' ) ' +test_expect_success 'submodule update --merge - ignores --merge for new submodules' ' + (cd super && + rm -rf submodule && + git submodule update submodule && + git status -s submodule >expect && + rm -rf submodule && + git submodule update --merge submodule && + git status -s submodule >actual && + test_cmp expect actual + ) +' + +test_expect_success 'submodule update --rebase - ignores --rebase for new submodules' ' + (cd super && + rm -rf submodule && + git submodule update submodule && + git status -s submodule >expect && + rm -rf submodule && + git submodule update --rebase submodule && + git status -s submodule >actual && + test_cmp expect actual + ) +' + +test_expect_success 'submodule update ignores update=merge config for new submodules' ' + (cd super && + rm -rf submodule && + git submodule update submodule && + git status -s submodule >expect && + rm -rf submodule && + git config submodule.submodule.update merge && + git submodule update submodule && + git status -s submodule >actual && + git config --unset submodule.submodule.update && + test_cmp expect actual + ) +' + +test_expect_success 'submodule update ignores update=rebase config for new submodules' ' + (cd super && + rm -rf submodule && + git submodule update submodule && + git status -s submodule >expect && + rm -rf submodule && + git config submodule.submodule.update rebase && + git submodule update submodule && + git status -s submodule >actual && + git config --unset submodule.submodule.update && + test_cmp expect actual + ) +' + test_done diff --git a/t/t7500-commit.sh b/t/t7500-commit.sh index d551b77ce6..bcdf0847d0 100755 --- a/t/t7500-commit.sh +++ b/t/t7500-commit.sh @@ -28,13 +28,21 @@ test_expect_success 'a basic commit in an empty tree should succeed' ' test_expect_success 'nonexistent template file should return error' ' echo changes >> foo && git add foo && - test_must_fail git commit --template "$PWD"/notexist + ( + GIT_EDITOR="echo hello >\"\$1\"" && + export GIT_EDITOR && + test_must_fail git commit --template "$PWD"/notexist + ) ' test_expect_success 'nonexistent template file in config should return error' ' git config commit.template "$PWD"/notexist && - test_must_fail git commit && - git config --unset commit.template + test_when_finished "git config --unset commit.template" && + ( + GIT_EDITOR="echo hello >\"\$1\"" && + export GIT_EDITOR && + test_must_fail git commit + ) ' # From now on we'll use a template file that exists. @@ -64,7 +72,7 @@ test_expect_success 'adding comments to a template should not commit' ' ) ' -test_expect_success 'adding real content to a template should commit' ' +test_expect_success C_LOCALE_OUTPUT 'adding real content to a template should commit' ' ( test_set_editor "$TEST_DIRECTORY"/t7500/add-content && git commit --template "$TEMPLATE" @@ -72,7 +80,7 @@ test_expect_success 'adding real content to a template should commit' ' commit_msg_is "template linecommit message" ' -test_expect_success '-t option should be short for --template' ' +test_expect_success C_LOCALE_OUTPUT '-t option should be short for --template' ' echo "short template" > "$TEMPLATE" && echo "new content" >> foo && git add foo && @@ -83,7 +91,7 @@ test_expect_success '-t option should be short for --template' ' commit_msg_is "short templatecommit message" ' -test_expect_success 'config-specified template should commit' ' +test_expect_success C_LOCALE_OUTPUT 'config-specified template should commit' ' echo "new template" > "$TEMPLATE" && git config commit.template "$TEMPLATE" && echo "more content" >> foo && @@ -282,7 +290,7 @@ test_expect_success 'commit --squash works with -c for same commit' ' commit_msg_is "squash! edited commit" ' -test_expect_success 'commit --squash works with editor' ' +test_expect_success C_LOCALE_OUTPUT 'commit --squash works with editor' ' commit_for_rebase_autosquash_setup && test_set_editor "$TEST_DIRECTORY"/t7500/add-content && git commit --squash HEAD~1 && diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index 8980738c75..a76c474195 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -14,8 +14,11 @@ test_tick test_expect_success \ "initial status" \ "echo 'bongo bongo' >file && - git add file && \ - git status | grep 'Initial commit'" + git add file" + +test_expect_success C_LOCALE_OUTPUT \ + "Constructing initial commit" \ + "git status | grep 'Initial commit'" test_expect_success \ "fail initial amend" \ diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 50da034cd3..cfb569eaba 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -22,7 +22,10 @@ check_summary_oneline() { SUMMARY_POSTFIX="$(git log -1 --pretty='format:%h')" echo "[$SUMMARY_PREFIX $SUMMARY_POSTFIX] $2" >exp && - test_cmp exp act + if test_have_prereq C_LOCALE_OUTPUT + then + test_cmp exp act + fi } test_expect_success 'output summary format' ' @@ -32,7 +35,10 @@ test_expect_success 'output summary format' ' check_summary_oneline "root-commit" "initial" && echo change >>file1 && - git add file1 && + git add file1 +' + +test_expect_success 'output summary format: root-commit' ' check_summary_oneline "" "a change" ' @@ -215,30 +221,35 @@ test_expect_success 'cleanup commit messages (strip,-F)' ' ' -echo "sample - -# Please enter the commit message for your changes. Lines starting -# with '#' will be ignored, and an empty message aborts the commit." >expect - test_expect_success 'cleanup commit messages (strip,-F,-e)' ' echo >>negative && { echo;echo sample;echo; } >text && git commit -e -F text -a && - head -n 4 .git/COMMIT_EDITMSG >actual && - test_cmp expect actual + head -n 4 .git/COMMIT_EDITMSG >actual +' + +echo "sample + +# Please enter the commit message for your changes. Lines starting +# with '#' will be ignored, and an empty message aborts the commit." >expect +test_expect_success C_LOCALE_OUTPUT 'cleanup commit messages (strip,-F,-e): output' ' + test_cmp expect actual ' echo "# # Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> #" >> expect -test_expect_success 'author different from committer' ' +test_expect_success C_LOCALE_OUTPUT 'author different from committer' ' echo >>negative && git commit -e -m "sample" - head -n 7 .git/COMMIT_EDITMSG >actual && + head -n 7 .git/COMMIT_EDITMSG >actual +' + +test_expect_success C_LOCALE_OUTPUT 'author different from committer: output' ' test_cmp expect actual ' @@ -248,7 +259,7 @@ rm -f expect.tmp echo "# Committer: #" >> expect -test_expect_success 'committer is automatic' ' +test_expect_success C_LOCALE_OUTPUT 'committer is automatic' ' echo >>negative && ( @@ -258,7 +269,10 @@ test_expect_success 'committer is automatic' ' test_must_fail git commit -e -m "sample" ) && head -n 8 .git/COMMIT_EDITMSG | \ - sed "s/^# Committer: .*/# Committer:/" >actual && + sed "s/^# Committer: .*/# Committer:/" >actual +' + +test_expect_success C_LOCALE_OUTPUT 'committer is automatic: output' ' test_cmp expect actual ' @@ -370,66 +384,66 @@ try_commit () { try_commit_status_combo () { - test_expect_success 'commit' ' + test_expect_success C_LOCALE_OUTPUT 'commit' ' clear_config commit.status && try_commit "" && grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit' ' + test_expect_success C_LOCALE_OUTPUT 'commit' ' clear_config commit.status && try_commit "" && grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit --status' ' + test_expect_success C_LOCALE_OUTPUT 'commit --status' ' clear_config commit.status && try_commit --status && grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit --no-status' ' + test_expect_success C_LOCALE_OUTPUT 'commit --no-status' ' clear_config commit.status && try_commit --no-status && ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit with commit.status = yes' ' + test_expect_success C_LOCALE_OUTPUT 'commit with commit.status = yes' ' clear_config commit.status && git config commit.status yes && try_commit "" && grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit with commit.status = no' ' + test_expect_success C_LOCALE_OUTPUT 'commit with commit.status = no' ' clear_config commit.status && git config commit.status no && try_commit "" && ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit --status with commit.status = yes' ' + test_expect_success C_LOCALE_OUTPUT 'commit --status with commit.status = yes' ' clear_config commit.status && git config commit.status yes && try_commit --status && grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit --no-status with commit.status = yes' ' + test_expect_success C_LOCALE_OUTPUT 'commit --no-status with commit.status = yes' ' clear_config commit.status && git config commit.status yes && try_commit --no-status && ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit --status with commit.status = no' ' + test_expect_success C_LOCALE_OUTPUT 'commit --status with commit.status = no' ' clear_config commit.status && git config commit.status no && try_commit --status && grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit --no-status with commit.status = no' ' + test_expect_success C_LOCALE_OUTPUT 'commit --no-status with commit.status = no' ' clear_config commit.status && git config commit.status no && try_commit --no-status && diff --git a/t/t7505-prepare-commit-msg-hook.sh b/t/t7505-prepare-commit-msg-hook.sh index ff189624d4..5b4b694f18 100755 --- a/t/t7505-prepare-commit-msg-hook.sh +++ b/t/t7505-prepare-commit-msg-hook.sh @@ -132,6 +132,18 @@ test_expect_success 'with hook (-c)' ' ' +test_expect_success 'with hook (merge)' ' + + head=`git rev-parse HEAD` && + git checkout -b other HEAD@{1} && + echo "more" >> file && + git add file && + git commit -m other && + git checkout - && + git merge other && + test "`git log -1 --pretty=format:%s`" = merge +' + cat > "$HOOK" <<'EOF' #!/bin/sh exit 1 diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh index 3d4f85d74f..c56733253f 100755 --- a/t/t7506-status-submodule.sh +++ b/t/t7506-status-submodule.sh @@ -20,17 +20,17 @@ test_expect_success 'setup' ' git commit -m "Add submodule sub" ' -test_expect_success 'status clean' ' +test_expect_success C_LOCALE_OUTPUT 'status clean' ' git status >output && grep "nothing to commit" output ' -test_expect_success 'commit --dry-run -a clean' ' +test_expect_success C_LOCALE_OUTPUT 'commit --dry-run -a clean' ' test_must_fail git commit --dry-run -a >output && grep "nothing to commit" output ' -test_expect_success 'status with modified file in submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status with modified file in submodule' ' (cd sub && git reset --hard) && echo "changed" >sub/foo && git status >output && @@ -46,7 +46,7 @@ test_expect_success 'status with modified file in submodule (porcelain)' ' EOF ' -test_expect_success 'status with added file in submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status with added file in submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && git status >output && grep "modified: sub (modified content)" output @@ -60,14 +60,14 @@ test_expect_success 'status with added file in submodule (porcelain)' ' EOF ' -test_expect_success 'status with untracked file in submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status with untracked file in submodule' ' (cd sub && git reset --hard) && echo "content" >sub/new-file && git status >output && grep "modified: sub (untracked content)" output ' -test_expect_success 'status -uno with untracked file in submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status -uno with untracked file in submodule' ' git status -uno >output && grep "^nothing to commit" output ' @@ -79,7 +79,7 @@ test_expect_success 'status with untracked file in submodule (porcelain)' ' EOF ' -test_expect_success 'status with added and untracked file in submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status with added and untracked file in submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && echo "content" >sub/new-file && git status >output && @@ -95,7 +95,7 @@ test_expect_success 'status with added and untracked file in submodule (porcelai EOF ' -test_expect_success 'status with modified file in modified submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status with modified file in modified submodule' ' (cd sub && git reset --hard) && rm sub/new-file && (cd sub && echo "next change" >foo && git commit -m "next change" foo) && @@ -113,7 +113,7 @@ test_expect_success 'status with modified file in modified submodule (porcelain) EOF ' -test_expect_success 'status with added file in modified submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status with added file in modified submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && git status >output && grep "modified: sub (new commits, modified content)" output @@ -127,7 +127,7 @@ test_expect_success 'status with added file in modified submodule (porcelain)' ' EOF ' -test_expect_success 'status with untracked file in modified submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status with untracked file in modified submodule' ' (cd sub && git reset --hard) && echo "content" >sub/new-file && git status >output && @@ -141,7 +141,7 @@ test_expect_success 'status with untracked file in modified submodule (porcelain EOF ' -test_expect_success 'status with added and untracked file in modified submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status with added and untracked file in modified submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && echo "content" >sub/new-file && git status >output && @@ -167,7 +167,7 @@ test_expect_success 'setup .git file for sub' ' git commit -m "added .real to .gitignore" .gitignore ' -test_expect_success 'status with added file in modified submodule with .git file' ' +test_expect_success C_LOCALE_OUTPUT 'status with added file in modified submodule with .git file' ' (cd sub && git reset --hard && echo >foo && git add foo) && git status >output && grep "modified: sub (new commits, modified content)" output @@ -177,12 +177,12 @@ test_expect_success 'rm submodule contents' ' rm -rf sub/* sub/.git ' -test_expect_success 'status clean (empty submodule dir)' ' +test_expect_success C_LOCALE_OUTPUT 'status clean (empty submodule dir)' ' git status >output && grep "nothing to commit" output ' -test_expect_success 'status -a clean (empty submodule dir)' ' +test_expect_success C_LOCALE_OUTPUT 'status -a clean (empty submodule dir)' ' test_must_fail git commit --dry-run -a >output && grep "nothing to commit" output ' diff --git a/t/t7508-status.sh b/t/t7508-status.sh index f1dc5c3b6a..a93e70fac4 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -55,7 +55,7 @@ test_expect_success 'setup' ' git add dir2/added ' -test_expect_success 'status (1)' ' +test_expect_success C_LOCALE_OUTPUT 'status (1)' ' grep "use \"git rm --cached <file>\.\.\.\" to unstage" output @@ -85,7 +85,7 @@ cat >expect <<\EOF # untracked EOF -test_expect_success 'status (2)' ' +test_expect_success C_LOCALE_OUTPUT 'status (2)' ' git status >output && test_cmp expect output @@ -111,7 +111,7 @@ EOF git config advice.statusHints false -test_expect_success 'status (advice.statusHints false)' ' +test_expect_success C_LOCALE_OUTPUT 'status (advice.statusHints false)' ' git status >output && test_cmp expect output @@ -157,6 +157,12 @@ test_expect_success 'status -s -b' ' ' +test_expect_success 'setup dir3' ' + mkdir dir3 && + : >dir3/untracked1 && + : >dir3/untracked2 +' + cat >expect <<EOF # On branch master # Changes to be committed: @@ -172,16 +178,14 @@ cat >expect <<EOF # # Untracked files not listed (use -u option to show untracked files) EOF -test_expect_success 'status -uno' ' - mkdir dir3 && - : >dir3/untracked1 && - : >dir3/untracked2 && +test_expect_success C_LOCALE_OUTPUT 'status -uno' ' git status -uno >output && test_cmp expect output ' -test_expect_success 'status (status.showUntrackedFiles no)' ' +test_expect_success C_LOCALE_OUTPUT 'status (status.showUntrackedFiles no)' ' git config status.showuntrackedfiles no + test_when_finished "git config --unset status.showuntrackedfiles" && git status >output && test_cmp expect output ' @@ -197,7 +201,7 @@ cat >expect <<EOF # Untracked files not listed EOF git config advice.statusHints false -test_expect_success 'status -uno (advice.statusHints false)' ' +test_expect_success C_LOCALE_OUTPUT 'status -uno (advice.statusHints false)' ' git status -uno >output && test_cmp expect output ' @@ -208,7 +212,6 @@ cat >expect << EOF A dir2/added EOF test_expect_success 'status -s -uno' ' - git config --unset status.showuntrackedfiles git status -s -uno >output && test_cmp expect output ' @@ -243,13 +246,14 @@ cat >expect <<EOF # output # untracked EOF -test_expect_success 'status -unormal' ' +test_expect_success C_LOCALE_OUTPUT 'status -unormal' ' git status -unormal >output && test_cmp expect output ' -test_expect_success 'status (status.showUntrackedFiles normal)' ' +test_expect_success C_LOCALE_OUTPUT 'status (status.showUntrackedFiles normal)' ' git config status.showuntrackedfiles normal + test_when_finished "git config --unset status.showuntrackedfiles" && git status >output && test_cmp expect output ' @@ -266,7 +270,6 @@ A dir2/added ?? untracked EOF test_expect_success 'status -s -unormal' ' - git config --unset status.showuntrackedfiles git status -s -unormal >output && test_cmp expect output ' @@ -302,18 +305,21 @@ cat >expect <<EOF # output # untracked EOF -test_expect_success 'status -uall' ' +test_expect_success C_LOCALE_OUTPUT 'status -uall' ' git status -uall >output && test_cmp expect output ' -test_expect_success 'status (status.showUntrackedFiles all)' ' +test_expect_success C_LOCALE_OUTPUT 'status (status.showUntrackedFiles all)' ' git config status.showuntrackedfiles all + test_when_finished "git config --unset status.showuntrackedfiles" && git status >output && - rm -rf dir3 && - git config --unset status.showuntrackedfiles && test_cmp expect output ' +test_expect_success 'teardown dir3' ' + rm -rf dir3 +' + cat >expect <<EOF M dir1/modified A dir2/added @@ -361,7 +367,7 @@ cat >expect <<\EOF # ../untracked EOF -test_expect_success 'status with relative paths' ' +test_expect_success C_LOCALE_OUTPUT 'status with relative paths' ' (cd dir1 && git status) >output && test_cmp expect output @@ -434,18 +440,19 @@ cat >expect <<\EOF # <BLUE>untracked<RESET> EOF -test_expect_success 'status with color.ui' ' +test_expect_success C_LOCALE_OUTPUT 'status with color.ui' ' git config color.ui always && + test_when_finished "git config --unset color.ui" && git status | test_decode_color >output && test_cmp expect output ' -test_expect_success 'status with color.status' ' +test_expect_success C_LOCALE_OUTPUT 'status with color.status' ' - git config --unset color.ui && git config color.status always && + test_when_finished "git config --unset color.status" && git status | test_decode_color >output && test_cmp expect output @@ -464,7 +471,6 @@ EOF test_expect_success 'status -s with color.ui' ' - git config --unset color.status && git config color.ui always && git status -s | test_decode_color >output && test_cmp expect output @@ -564,9 +570,10 @@ cat >expect <<\EOF EOF -test_expect_success 'status without relative paths' ' +test_expect_success C_LOCALE_OUTPUT 'status without relative paths' ' - git config status.relativePaths false + git config status.relativePaths false && + test_when_finished "git config --unset status.relativePaths" && (cd dir1 && git status) >output && test_cmp expect output @@ -585,6 +592,8 @@ EOF test_expect_success 'status -s without relative paths' ' + git config status.relativePaths false && + test_when_finished "git config --unset status.relativePaths" && (cd dir1 && git status -s) >output && test_cmp expect output @@ -607,7 +616,10 @@ cat <<EOF >expect # untracked EOF test_expect_success 'dry-run of partial commit excluding new file in index' ' - git commit --dry-run dir1/modified >output && + git commit --dry-run dir1/modified >output +' + +test_expect_success C_LOCALE_OUTPUT 'dry-run of partial commit excluding new file in index: output' ' test_cmp expect output ' @@ -655,13 +667,13 @@ cat >expect <<EOF # output # untracked EOF -test_expect_success 'status submodule summary is disabled by default' ' +test_expect_success C_LOCALE_OUTPUT 'status submodule summary is disabled by default' ' git status >output && test_cmp expect output ' # we expect the same as the previous test -test_expect_success 'status --untracked-files=all does not show submodule' ' +test_expect_success C_LOCALE_OUTPUT 'status --untracked-files=all does not show submodule' ' git status --untracked-files=all >output && test_cmp expect output ' @@ -719,7 +731,7 @@ cat >expect <<EOF # output # untracked EOF -test_expect_success 'status submodule summary' ' +test_expect_success C_LOCALE_OUTPUT 'status submodule summary' ' git config status.submodulesummary 10 && git status >output && test_cmp expect output @@ -760,8 +772,11 @@ cat >expect <<EOF # untracked no changes added to commit (use "git add" and/or "git commit -a") EOF -test_expect_success 'status submodule summary (clean submodule)' ' - git commit -m "commit submodule" && +test_expect_success 'status submodule summary (clean submodule): commit' ' + git commit -m "commit submodule" +' + +test_expect_success C_LOCALE_OUTPUT 'status submodule summary (clean submodule): output' ' git config status.submodulesummary 10 && test_must_fail git commit --dry-run >output && test_cmp expect output && @@ -812,7 +827,7 @@ cat >expect <<EOF # output # untracked EOF -test_expect_success 'commit --dry-run submodule summary (--amend)' ' +test_expect_success C_LOCALE_OUTPUT 'commit --dry-run submodule summary (--amend)' ' git config status.submodulesummary 10 && git commit --dry-run --amend >output && test_cmp expect output @@ -867,13 +882,13 @@ cat > expect << EOF # untracked EOF -test_expect_success '--ignore-submodules=untracked suppresses submodules with untracked content' ' +test_expect_success C_LOCALE_OUTPUT '--ignore-submodules=untracked suppresses submodules with untracked content' ' echo modified > sm/untracked && git status --ignore-submodules=untracked > output && test_cmp expect output ' -test_expect_success '.gitmodules ignore=untracked suppresses submodules with untracked content' ' +test_expect_success C_LOCALE_OUTPUT '.gitmodules ignore=untracked suppresses submodules with untracked content' ' git config diff.ignoreSubmodules dirty && git status >output && test_cmp expect output && @@ -885,7 +900,7 @@ test_expect_success '.gitmodules ignore=untracked suppresses submodules with unt git config --unset diff.ignoreSubmodules ' -test_expect_success '.git/config ignore=untracked suppresses submodules with untracked content' ' +test_expect_success C_LOCALE_OUTPUT '.git/config ignore=untracked suppresses submodules with untracked content' ' git config --add -f .gitmodules submodule.subname.ignore none && git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore untracked && @@ -896,12 +911,12 @@ test_expect_success '.git/config ignore=untracked suppresses submodules with unt git config --remove-section -f .gitmodules submodule.subname ' -test_expect_success '--ignore-submodules=dirty suppresses submodules with untracked content' ' +test_expect_success C_LOCALE_OUTPUT '--ignore-submodules=dirty suppresses submodules with untracked content' ' git status --ignore-submodules=dirty > output && test_cmp expect output ' -test_expect_success '.gitmodules ignore=dirty suppresses submodules with untracked content' ' +test_expect_success C_LOCALE_OUTPUT '.gitmodules ignore=dirty suppresses submodules with untracked content' ' git config diff.ignoreSubmodules dirty && git status >output && ! test -s actual && @@ -913,7 +928,7 @@ test_expect_success '.gitmodules ignore=dirty suppresses submodules with untrack git config --unset diff.ignoreSubmodules ' -test_expect_success '.git/config ignore=dirty suppresses submodules with untracked content' ' +test_expect_success C_LOCALE_OUTPUT '.git/config ignore=dirty suppresses submodules with untracked content' ' git config --add -f .gitmodules submodule.subname.ignore none && git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore dirty && @@ -924,13 +939,13 @@ test_expect_success '.git/config ignore=dirty suppresses submodules with untrack git config -f .gitmodules --remove-section submodule.subname ' -test_expect_success '--ignore-submodules=dirty suppresses submodules with modified content' ' +test_expect_success C_LOCALE_OUTPUT '--ignore-submodules=dirty suppresses submodules with modified content' ' echo modified > sm/foo && git status --ignore-submodules=dirty > output && test_cmp expect output ' -test_expect_success '.gitmodules ignore=dirty suppresses submodules with modified content' ' +test_expect_success C_LOCALE_OUTPUT '.gitmodules ignore=dirty suppresses submodules with modified content' ' git config --add -f .gitmodules submodule.subname.ignore dirty && git config --add -f .gitmodules submodule.subname.path sm && git status > output && @@ -938,7 +953,7 @@ test_expect_success '.gitmodules ignore=dirty suppresses submodules with modifie git config -f .gitmodules --remove-section submodule.subname ' -test_expect_success '.git/config ignore=dirty suppresses submodules with modified content' ' +test_expect_success C_LOCALE_OUTPUT '.git/config ignore=dirty suppresses submodules with modified content' ' git config --add -f .gitmodules submodule.subname.ignore none && git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore dirty && @@ -981,12 +996,12 @@ cat > expect << EOF # untracked EOF -test_expect_success "--ignore-submodules=untracked doesn't suppress submodules with modified content" ' +test_expect_success C_LOCALE_OUTPUT "--ignore-submodules=untracked doesn't suppress submodules with modified content" ' git status --ignore-submodules=untracked > output && test_cmp expect output ' -test_expect_success ".gitmodules ignore=untracked doesn't suppress submodules with modified content" ' +test_expect_success C_LOCALE_OUTPUT ".gitmodules ignore=untracked doesn't suppress submodules with modified content" ' git config --add -f .gitmodules submodule.subname.ignore untracked && git config --add -f .gitmodules submodule.subname.path sm && git status > output && @@ -994,7 +1009,7 @@ test_expect_success ".gitmodules ignore=untracked doesn't suppress submodules wi git config -f .gitmodules --remove-section submodule.subname ' -test_expect_success ".git/config ignore=untracked doesn't suppress submodules with modified content" ' +test_expect_success C_LOCALE_OUTPUT ".git/config ignore=untracked doesn't suppress submodules with modified content" ' git config --add -f .gitmodules submodule.subname.ignore none && git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore untracked && @@ -1043,12 +1058,12 @@ cat > expect << EOF # untracked EOF -test_expect_success "--ignore-submodules=untracked doesn't suppress submodule summary" ' +test_expect_success C_LOCALE_OUTPUT "--ignore-submodules=untracked doesn't suppress submodule summary" ' git status --ignore-submodules=untracked > output && test_cmp expect output ' -test_expect_success ".gitmodules ignore=untracked doesn't suppress submodule summary" ' +test_expect_success C_LOCALE_OUTPUT ".gitmodules ignore=untracked doesn't suppress submodule summary" ' git config --add -f .gitmodules submodule.subname.ignore untracked && git config --add -f .gitmodules submodule.subname.path sm && git status > output && @@ -1056,7 +1071,7 @@ test_expect_success ".gitmodules ignore=untracked doesn't suppress submodule sum git config -f .gitmodules --remove-section submodule.subname ' -test_expect_success ".git/config ignore=untracked doesn't suppress submodule summary" ' +test_expect_success C_LOCALE_OUTPUT ".git/config ignore=untracked doesn't suppress submodule summary" ' git config --add -f .gitmodules submodule.subname.ignore none && git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore untracked && @@ -1067,11 +1082,11 @@ test_expect_success ".git/config ignore=untracked doesn't suppress submodule sum git config -f .gitmodules --remove-section submodule.subname ' -test_expect_success "--ignore-submodules=dirty doesn't suppress submodule summary" ' +test_expect_success C_LOCALE_OUTPUT "--ignore-submodules=dirty doesn't suppress submodule summary" ' git status --ignore-submodules=dirty > output && test_cmp expect output ' -test_expect_success ".gitmodules ignore=dirty doesn't suppress submodule summary" ' +test_expect_success C_LOCALE_OUTPUT ".gitmodules ignore=dirty doesn't suppress submodule summary" ' git config --add -f .gitmodules submodule.subname.ignore dirty && git config --add -f .gitmodules submodule.subname.path sm && git status > output && @@ -1079,7 +1094,7 @@ test_expect_success ".gitmodules ignore=dirty doesn't suppress submodule summary git config -f .gitmodules --remove-section submodule.subname ' -test_expect_success ".git/config ignore=dirty doesn't suppress submodule summary" ' +test_expect_success C_LOCALE_OUTPUT ".git/config ignore=dirty doesn't suppress submodule summary" ' git config --add -f .gitmodules submodule.subname.ignore none && git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore dirty && @@ -1111,7 +1126,7 @@ cat > expect << EOF no changes added to commit (use "git add" and/or "git commit -a") EOF -test_expect_success "--ignore-submodules=all suppresses submodule summary" ' +test_expect_success C_LOCALE_OUTPUT "--ignore-submodules=all suppresses submodule summary" ' git status --ignore-submodules=all > output && test_cmp expect output ' diff --git a/t/t7509-commit.sh b/t/t7509-commit.sh index 77b6920029..b61fd3c3c4 100755 --- a/t/t7509-commit.sh +++ b/t/t7509-commit.sh @@ -157,4 +157,33 @@ test_expect_success '--reset-author should be rejected without -c/-C/--amend' ' test_must_fail git commit -a --reset-author -m done ' +test_expect_success 'commit respects CHERRY_PICK_HEAD and MERGE_MSG' ' + echo "cherry-pick 1a" >>foo && + test_tick && + git commit -am "cherry-pick 1" --author="Cherry <cherry@pick.er>" && + git tag cherry-pick-head && + git rev-parse cherry-pick-head >.git/CHERRY_PICK_HEAD && + echo "This is a MERGE_MSG" >.git/MERGE_MSG && + echo "cherry-pick 1b" >>foo && + test_tick && + git commit -a && + author_header cherry-pick-head >expect && + author_header HEAD >actual && + test_cmp expect actual && + + echo "This is a MERGE_MSG" >expect && + message_body HEAD >actual && + test_cmp expect actual +' + +test_expect_success '--reset-author with CHERRY_PICK_HEAD' ' + git rev-parse cherry-pick-head >.git/CHERRY_PICK_HEAD && + echo "cherry-pick 2" >>foo && + test_tick && + git commit -am "cherry-pick 2" --reset-author && + echo "author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> $GIT_AUTHOR_DATE" >expect && + author_header HEAD >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index b147a1bd69..87d5d788cb 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -495,7 +495,7 @@ test_expect_success 'merge fast-forward in a dirty tree' ' test_debug 'git log --graph --decorate --oneline --all' -test_expect_success 'in-index merge' ' +test_expect_success C_LOCALE_OUTPUT 'in-index merge' ' git reset --hard c0 && git merge --no-ff -s resolve c1 >out && grep "Wonderful." out && diff --git a/t/t7607-merge-overwrite.sh b/t/t7607-merge-overwrite.sh index 5f731a1177..ef84f04102 100755 --- a/t/t7607-merge-overwrite.sh +++ b/t/t7607-merge-overwrite.sh @@ -122,7 +122,7 @@ test_expect_success 'will not overwrite untracked file in leading path' ' rm -f sub sub2 ' -test_expect_failure SYMLINKS 'will not overwrite untracked symlink in leading path' ' +test_expect_success SYMLINKS 'will not overwrite untracked symlink in leading path' ' git reset --hard c0 && rm -rf sub && mkdir sub2 && @@ -150,12 +150,23 @@ test_expect_success 'will not overwrite untracked file on unborn branch' ' git rm -fr . && git checkout --orphan new && cp important c0.c && - test_must_fail git merge c0 2>out && - test_cmp out expect && + test_must_fail git merge c0 2>out +' + +test_expect_success C_LOCALE_OUTPUT 'will not overwrite untracked file on unborn branch: output' ' + test_cmp out expect +' + +test_expect_success 'will not overwrite untracked file on unborn branch .git/MERGE_HEAD sanity etc.' ' + test_when_finished "rm c0.c" && test_path_is_missing .git/MERGE_HEAD && test_cmp important c0.c ' +test_expect_success 'failed merge leaves unborn branch in the womb' ' + test_must_fail git rev-parse --verify HEAD +' + test_expect_success 'set up unborn branch and content' ' git symbolic-ref HEAD refs/heads/unborn && rm -f .git/index && @@ -164,7 +175,7 @@ test_expect_success 'set up unborn branch and content' ' echo bar > untracked-file ' -test_expect_failure 'will not clobber WT/index when merging into unborn' ' +test_expect_success 'will not clobber WT/index when merging into unborn' ' git merge master && grep foo tracked-file && git show :tracked-file >expect && diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh index d78bdec330..dc838c93bc 100755 --- a/t/t7610-mergetool.sh +++ b/t/t7610-mergetool.sh @@ -16,23 +16,33 @@ Testing basic merge tool invocation' test_expect_success 'setup' ' git config rerere.enabled true && echo master >file1 && + echo master file11 >file11 && + echo master file12 >file12 && + echo master file13 >file13 && + echo master file14 >file14 && mkdir subdir && echo master sub >subdir/file3 && - git add file1 subdir/file3 && - git commit -m "added file1" && + git add file1 file1[1-4] subdir/file3 && + git commit -m "add initial versions" && git checkout -b branch1 master && echo branch1 change >file1 && echo branch1 newfile >file2 && + echo branch1 change file11 >file11 && + echo branch1 change file13 >file13 && echo branch1 sub >subdir/file3 && - git add file1 file2 subdir/file3 && + git add file1 file11 file13 file2 subdir/file3 && + git rm file12 && git commit -m "branch1 changes" && git checkout master && echo master updated >file1 && echo master new >file2 && + echo master updated file12 >file12 && + echo master updated file14 >file14 && echo master new sub >subdir/file3 && - git add file1 file2 subdir/file3 && + git add file1 file12 file14 file2 subdir/file3 && + git rm file11 && git commit -m "master updates" && git config merge.tool mytool && @@ -46,6 +56,8 @@ test_expect_success 'custom mergetool' ' ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && test "$(cat file1)" = "master updated" && test "$(cat file2)" = "master new" && test "$(cat subdir/file3)" = "master new sub" && @@ -59,6 +71,8 @@ test_expect_success 'mergetool crlf' ' ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && test "$(printf x | cat file1 -)" = "$(printf "master updated\r\nx")" && test "$(printf x | cat file2 -)" = "$(printf "master new\r\nx")" && test "$(printf x | cat subdir/file3 -)" = "$(printf "master new sub\r\nx")" && @@ -82,6 +96,8 @@ test_expect_success 'mergetool on file in parent dir' ' cd subdir && ( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) && ( yes "" | git mergetool ../file2 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool ../file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool ../file12 >/dev/null 2>&1 ) && test "$(cat ../file1)" = "master updated" && test "$(cat ../file2)" = "master new" && git commit -m "branch1 resolved with mergetool - subdir" @@ -92,6 +108,8 @@ test_expect_success 'mergetool skips autoresolved' ' git checkout -b test4 branch1 && test_must_fail git merge master && test -n "$(git ls-files -u)" && + ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git reset --hard @@ -102,13 +120,23 @@ test_expect_success 'mergetool merges all from subdir' ' cd subdir && git config rerere.enabled false && test_must_fail git merge master && - git mergetool --no-prompt && + ( yes "d" "d" | git mergetool --no-prompt ) && test "$(cat ../file1)" = "master updated" && test "$(cat ../file2)" = "master new" && test "$(cat file3)" = "master new sub" && - git add ../file1 ../file2 file3 && git commit -m "branch2 resolved by mergetool from subdir" ) ' +test_expect_success 'mergetool skips resolved paths when rerere is active' ' + git config rerere.enabled true && + rm -rf .git/rr-cache && + git checkout -b test5 branch1 + test_must_fail git merge master >/dev/null 2>&1 && + ( yes "d" "d" | git mergetool --no-prompt >/dev/null 2>&1 ) && + output="$(yes "n" | git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git reset --hard +' + test_done diff --git a/t/t7611-merge-abort.sh b/t/t7611-merge-abort.sh index 61890bc892..cdb3f444cd 100755 --- a/t/t7611-merge-abort.sh +++ b/t/t7611-merge-abort.sh @@ -46,8 +46,14 @@ test_expect_success 'setup' ' pre_merge_head="$(git rev-parse HEAD)" test_expect_success 'fails without MERGE_HEAD (unstarted merge)' ' - test_must_fail git merge --abort 2>output && - grep -q MERGE_HEAD output && + test_must_fail git merge --abort 2>output +' + +test_expect_success C_LOCALE_OUTPUT 'fails without MERGE_HEAD (unstarted merge): fatal output' ' + grep -q MERGE_HEAD output +' + +test_expect_success 'fails without MERGE_HEAD (unstarted merge): .git/MERGE_HEAD sanity' ' test ! -f .git/MERGE_HEAD && test "$pre_merge_head" = "$(git rev-parse HEAD)" ' @@ -57,8 +63,14 @@ test_expect_success 'fails without MERGE_HEAD (completed merge)' ' test ! -f .git/MERGE_HEAD && # Merge successfully completed post_merge_head="$(git rev-parse HEAD)" && - test_must_fail git merge --abort 2>output && - grep -q MERGE_HEAD output && + test_must_fail git merge --abort 2>output +' + +test_expect_success C_LOCALE_OUTPUT 'fails without MERGE_HEAD (completed merge): output' ' + grep -q MERGE_HEAD output +' + +test_expect_success 'fails without MERGE_HEAD (completed merge): .git/MERGE_HEAD sanity' ' test ! -f .git/MERGE_HEAD && test "$post_merge_head" = "$(git rev-parse HEAD)" ' diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index c8777589ca..8184c264cf 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -59,7 +59,29 @@ do echo ${HC}file:4:foo mmap bar_mmap echo ${HC}file:5:foo_mmap bar mmap baz } >expected && - git grep -n -w -e mmap $H >actual && + git -c grep.linenumber=false grep -n -w -e mmap $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep -w $L" ' + { + echo ${HC}file:1:foo mmap bar + echo ${HC}file:3:foo_mmap bar mmap + echo ${HC}file:4:foo mmap bar_mmap + echo ${HC}file:5:foo_mmap bar mmap baz + } >expected && + git -c grep.linenumber=true grep -w -e mmap $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep -w $L" ' + { + echo ${HC}file:foo mmap bar + echo ${HC}file:foo_mmap bar mmap + echo ${HC}file:foo mmap bar_mmap + echo ${HC}file:foo_mmap bar mmap baz + } >expected && + git -c grep.linenumber=true grep --no-line-number -w -e mmap $H >actual && test_cmp expected actual ' @@ -182,6 +204,24 @@ do test_cmp expected actual ' + test_expect_success "grep --max-depth 0 -- . t $L" ' + { + echo ${HC}t/v:1:vvv + echo ${HC}v:1:vvv + } >expected && + git grep --max-depth 0 -n -e vvv $H -- . t >actual && + test_cmp expected actual + ' + + test_expect_success "grep --max-depth 0 -- t . $L" ' + { + echo ${HC}t/v:1:vvv + echo ${HC}v:1:vvv + } >expected && + git grep --max-depth 0 -n -e vvv $H -- t . >actual && + test_cmp expected actual + ' + done cat >expected <<EOF @@ -285,6 +325,11 @@ test_expect_success 'grep -f, ignore empty lines' ' test_cmp expected actual ' +test_expect_success 'grep -f, ignore empty lines, read patterns from stdin' ' + git grep -f - <patterns >actual && + test_cmp expected actual +' + cat >expected <<EOF y:y yy -- diff --git a/t/t7811-grep-open.sh b/t/t7811-grep-open.sh index 568a6f2b69..aedf484fee 100755 --- a/t/t7811-grep-open.sh +++ b/t/t7811-grep-open.sh @@ -61,7 +61,7 @@ test_expect_success SIMPLEPAGER 'git grep -O' ' test_cmp empty out ' -test_expect_success 'git grep -O --cached' ' +test_expect_success C_LOCALE_OUTPUT 'git grep -O --cached' ' test_must_fail git grep --cached -O GREP_PATTERN >out 2>msg && grep open-files-in-pager msg ' diff --git a/t/t8001-annotate.sh b/t/t8001-annotate.sh index 45cb60ea4b..41962f04a7 100755 --- a/t/t8001-annotate.sh +++ b/t/t8001-annotate.sh @@ -6,10 +6,11 @@ test_description='git annotate' PROG='git annotate' . "$TEST_DIRECTORY"/annotate-tests.sh -test_expect_success \ - 'Annotating an old revision works' \ - '[ $(git annotate file master | awk "{print \$3}" | grep -c "^A$") -eq 2 ] && \ - [ $(git annotate file master | awk "{print \$3}" | grep -c "^B$") -eq 2 ]' - +test_expect_success 'Annotating an old revision works' ' + git annotate file master >result && + awk "{ print \$3; }" <result >authors && + test 2 = $(grep A <authors | wc -l) && + test 2 = $(grep B <authors | wc -l) +' test_done diff --git a/t/t8006-blame-textconv.sh b/t/t8006-blame-textconv.sh index ea64cd8d0f..32ec82ad67 100755 --- a/t/t8006-blame-textconv.sh +++ b/t/t8006-blame-textconv.sh @@ -25,7 +25,8 @@ test_expect_success 'setup ' ' echo "bin: test 1 version 2" >one.bin && echo "bin: test number 2 version 2" >>two.bin && if test_have_prereq SYMLINKS; then - ln -sf two.bin symlink.bin + rm symlink.bin && + ln -s two.bin symlink.bin fi && GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00" ' diff --git a/t/t9010-svn-fe.sh b/t/t9010-svn-fe.sh index 478c860647..003395c5f6 100755 --- a/t/t9010-svn-fe.sh +++ b/t/t9010-svn-fe.sh @@ -5,8 +5,26 @@ test_description='check svn dumpfile importer' . ./test-lib.sh reinit_git () { + if ! test_declared_prereq PIPE + then + echo >&4 "reinit_git: need to declare PIPE prerequisite" + return 127 + fi rm -fr .git && - git init + rm -f stream backflow && + git init && + mkfifo stream backflow +} + +try_dump () { + input=$1 && + maybe_fail=${2:+test_$2} && + + { + $maybe_fail test-svn-fe "$input" >stream 3<backflow & + } && + git fast-import --cat-blob-fd=3 <stream 3>backflow && + wait $! } properties () { @@ -35,21 +53,27 @@ text_no_props () { >empty -test_expect_success 'empty dump' ' +test_expect_success 'setup: have pipes?' ' + rm -f frob && + if mkfifo frob + then + test_set_prereq PIPE + fi +' + +test_expect_success PIPE 'empty dump' ' reinit_git && echo "SVN-fs-dump-format-version: 2" >input && - test-svn-fe input >stream && - git fast-import <stream + try_dump input ' -test_expect_success 'v4 dumps not supported' ' +test_expect_success PIPE 'v4 dumps not supported' ' reinit_git && echo "SVN-fs-dump-format-version: 4" >v4.dump && - test_must_fail test-svn-fe v4.dump >stream && - test_cmp empty stream + try_dump v4.dump must_fail ' -test_expect_failure 'empty revision' ' +test_expect_failure PIPE 'empty revision' ' reinit_git && printf "rev <nobody, nobody@local>: %s\n" "" "" >expect && cat >emptyrev.dump <<-\EOF && @@ -64,13 +88,12 @@ test_expect_failure 'empty revision' ' Content-length: 0 EOF - test-svn-fe emptyrev.dump >stream && - git fast-import <stream && + try_dump emptyrev.dump && git log -p --format="rev <%an, %ae>: %s" HEAD >actual && test_cmp expect actual ' -test_expect_success 'empty properties' ' +test_expect_success PIPE 'empty properties' ' reinit_git && printf "rev <nobody, nobody@local>: %s\n" "" "" >expect && cat >emptyprop.dump <<-\EOF && @@ -88,13 +111,12 @@ test_expect_success 'empty properties' ' PROPS-END EOF - test-svn-fe emptyprop.dump >stream && - git fast-import <stream && + try_dump emptyprop.dump && git log -p --format="rev <%an, %ae>: %s" HEAD >actual && test_cmp expect actual ' -test_expect_success 'author name and commit message' ' +test_expect_success PIPE 'author name and commit message' ' reinit_git && echo "<author@example.com, author@example.com@local>" >expect.author && cat >message <<-\EOF && @@ -121,15 +143,14 @@ test_expect_success 'author name and commit message' ' echo && cat props } >log.dump && - test-svn-fe log.dump >stream && - git fast-import <stream && + try_dump log.dump && git log -p --format="%B" HEAD >actual.log && git log --format="<%an, %ae>" >actual.author && test_cmp message actual.log && test_cmp expect.author actual.author ' -test_expect_success 'unsupported properties are ignored' ' +test_expect_success PIPE 'unsupported properties are ignored' ' reinit_git && echo author >expect && cat >extraprop.dump <<-\EOF && @@ -149,13 +170,12 @@ test_expect_success 'unsupported properties are ignored' ' author PROPS-END EOF - test-svn-fe extraprop.dump >stream && - git fast-import <stream && + try_dump extraprop.dump && git log -p --format=%an HEAD >actual && test_cmp expect actual ' -test_expect_failure 'timestamp and empty file' ' +test_expect_failure PIPE 'timestamp and empty file' ' echo author@example.com >expect.author && echo 1999-01-01 >expect.date && echo file >expect.files && @@ -186,8 +206,7 @@ test_expect_failure 'timestamp and empty file' ' EOF } >emptyfile.dump && - test-svn-fe emptyfile.dump >stream && - git fast-import <stream && + try_dump emptyfile.dump && git log --format=%an HEAD >actual.author && git log --date=short --format=%ad HEAD >actual.date && git ls-tree -r --name-only HEAD >actual.files && @@ -198,7 +217,7 @@ test_expect_failure 'timestamp and empty file' ' test_cmp empty file ' -test_expect_success 'directory with files' ' +test_expect_success PIPE 'directory with files' ' reinit_git && printf "%s\n" directory/file1 directory/file2 >expect.files && echo hi >hi && @@ -242,8 +261,7 @@ test_expect_success 'directory with files' ' EOF text_no_props hi } >directory.dump && - test-svn-fe directory.dump >stream && - git fast-import <stream && + try_dump directory.dump && git ls-tree -r --name-only HEAD >actual.files && git checkout HEAD directory && @@ -252,7 +270,107 @@ test_expect_success 'directory with files' ' test_cmp hi directory/file2 ' -test_expect_success 'node without action' ' +test_expect_success PIPE 'branch name with backslash' ' + reinit_git && + sort <<-\EOF >expect.branch-files && + trunk/file1 + trunk/file2 + "branches/UpdateFOPto094\\/file1" + "branches/UpdateFOPto094\\/file2" + EOF + + echo hi >hi && + echo hello >hello && + { + properties \ + svn:author author@example.com \ + svn:date "1999-02-02T00:01:02.000000Z" \ + svn:log "add directory with some files in it" && + echo PROPS-END + } >props.setup && + { + properties \ + svn:author brancher@example.com \ + svn:date "2007-12-06T21:38:34.000000Z" \ + svn:log "Updating fop to .94 and adjust fo-stylesheets" && + echo PROPS-END + } >props.branch && + { + cat <<-EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + EOF + echo Prop-content-length: $(wc -c <props.setup) && + echo Content-length: $(wc -c <props.setup) && + echo && + cat props.setup && + cat <<-\EOF && + + Node-path: trunk + Node-kind: dir + Node-action: add + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: branches + Node-kind: dir + Node-action: add + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: trunk/file1 + Node-kind: file + Node-action: add + EOF + text_no_props hello && + cat <<-\EOF && + Node-path: trunk/file2 + Node-kind: file + Node-action: add + EOF + text_no_props hi && + cat <<-\EOF && + + Revision-number: 2 + EOF + echo Prop-content-length: $(wc -c <props.branch) && + echo Content-length: $(wc -c <props.branch) && + echo && + cat props.branch && + cat <<-\EOF + + Node-path: branches/UpdateFOPto094\ + Node-kind: dir + Node-action: add + Node-copyfrom-rev: 1 + Node-copyfrom-path: trunk + + Node-kind: dir + Node-action: add + Prop-content-length: 34 + Content-length: 34 + + K 13 + svn:mergeinfo + V 0 + + PROPS-END + EOF + } >branch.dump && + try_dump branch.dump && + + git ls-tree -r --name-only HEAD | + sort >actual.branch-files && + test_cmp expect.branch-files actual.branch-files +' + +test_expect_success PIPE 'node without action' ' + reinit_git && cat >inaction.dump <<-\EOF && SVN-fs-dump-format-version: 3 @@ -269,10 +387,11 @@ test_expect_success 'node without action' ' PROPS-END EOF - test_must_fail test-svn-fe inaction.dump + try_dump inaction.dump must_fail ' -test_expect_success 'action: add node without text' ' +test_expect_success PIPE 'action: add node without text' ' + reinit_git && cat >textless.dump <<-\EOF && SVN-fs-dump-format-version: 3 @@ -290,10 +409,10 @@ test_expect_success 'action: add node without text' ' PROPS-END EOF - test_must_fail test-svn-fe textless.dump + try_dump textless.dump must_fail ' -test_expect_failure 'change file mode but keep old content' ' +test_expect_failure PIPE 'change file mode but keep old content' ' reinit_git && cat >expect <<-\EOF && OBJID @@ -356,8 +475,7 @@ test_expect_failure 'change file mode but keep old content' ' PROPS-END EOF - test-svn-fe filemode.dump >stream && - git fast-import <stream && + try_dump filemode.dump && { git rev-list HEAD | git diff-tree --root --stdin | @@ -370,7 +488,7 @@ test_expect_failure 'change file mode but keep old content' ' test_cmp hello actual.target ' -test_expect_success 'NUL in property value' ' +test_expect_success PIPE 'NUL in property value' ' reinit_git && echo "commit message" >expect.message && { @@ -391,13 +509,12 @@ test_expect_success 'NUL in property value' ' echo && cat props } >nulprop.dump && - test-svn-fe nulprop.dump >stream && - git fast-import <stream && + try_dump nulprop.dump && git diff-tree --always -s --format=%s HEAD >actual.message && test_cmp expect.message actual.message ' -test_expect_success 'NUL in log message, file content, and property name' ' +test_expect_success PIPE 'NUL in log message, file content, and property name' ' # Caveat: svnadmin 1.6.16 (r1073529) truncates at \0 in the # svn:specialQnotreally example. reinit_git && @@ -407,7 +524,7 @@ test_expect_success 'NUL in log message, file content, and property name' ' OBJID :000000 100644 OBJID OBJID A greeting EOF - printf "\n%s" "something with an ASCII NUL (Q)" >expect.message && + printf "\n%s\n" "something with an ASCII NUL (Q)" >expect.message && printf "%s\n" "helQo" >expect.hello1 && printf "%s\n" "link hello" >expect.hello2 && { @@ -458,14 +575,17 @@ test_expect_success 'NUL in log message, file content, and property name' ' link hello EOF } >8bitclean.dump && - test-svn-fe 8bitclean.dump >stream && - git fast-import <stream && + try_dump 8bitclean.dump && { git rev-list HEAD | git diff-tree --root --stdin | sed "s/$_x40/OBJID/g" } >actual && - git cat-file commit HEAD | nul_to_q | sed -ne "/^\$/,\$ p" >actual.message && + { + git cat-file commit HEAD | nul_to_q && + echo + } | + sed -ne "/^\$/,\$ p" >actual.message && git cat-file blob HEAD^:greeting | nul_to_q >actual.hello1 && git cat-file blob HEAD:greeting | nul_to_q >actual.hello2 && test_cmp expect actual && @@ -474,7 +594,7 @@ test_expect_success 'NUL in log message, file content, and property name' ' test_cmp expect.hello2 actual.hello2 ' -test_expect_success 'change file mode and reiterate content' ' +test_expect_success PIPE 'change file mode and reiterate content' ' reinit_git && cat >expect <<-\EOF && OBJID @@ -486,7 +606,7 @@ test_expect_success 'change file mode and reiterate content' ' EOF echo "link hello" >expect.blob && echo hello >hello && - cat >filemode.dump <<-\EOF && + cat >filemode2.dump <<-\EOF && SVN-fs-dump-format-version: 3 Revision-number: 1 @@ -541,8 +661,7 @@ test_expect_success 'change file mode and reiterate content' ' PROPS-END link hello EOF - test-svn-fe filemode.dump >stream && - git fast-import <stream && + try_dump filemode2.dump && { git rev-list HEAD | git diff-tree --root --stdin | @@ -555,7 +674,8 @@ test_expect_success 'change file mode and reiterate content' ' test_cmp hello actual.target ' -test_expect_success 'deltas not supported' ' +test_expect_success PIPE 'deltas not supported' ' + reinit_git && { # (old) h + (inline) ello + (old) \n printf "SVNQ%b%b%s" "Q\003\006\005\004" "\001Q\0204\001\002" "ello" | @@ -615,10 +735,10 @@ test_expect_success 'deltas not supported' ' echo PROPS-END && cat delta } >delta.dump && - test_must_fail test-svn-fe delta.dump + test_must_fail try_dump delta.dump ' -test_expect_success 'property deltas supported' ' +test_expect_success PIPE 'property deltas supported' ' reinit_git && cat >expect <<-\EOF && OBJID @@ -674,8 +794,7 @@ test_expect_success 'property deltas supported' ' PROPS-END EOF } >propdelta.dump && - test-svn-fe propdelta.dump >stream && - git fast-import <stream && + try_dump propdelta.dump && { git rev-list HEAD | git diff-tree --stdin | @@ -684,7 +803,7 @@ test_expect_success 'property deltas supported' ' test_cmp expect actual ' -test_expect_success 'properties on /' ' +test_expect_success PIPE 'properties on /' ' reinit_git && cat <<-\EOF >expect && OBJID @@ -729,8 +848,7 @@ test_expect_success 'properties on /' ' PROPS-END EOF - test-svn-fe changeroot.dump >stream && - git fast-import <stream && + try_dump changeroot.dump && { git rev-list HEAD | git diff-tree --root --always --stdin | @@ -739,7 +857,7 @@ test_expect_success 'properties on /' ' test_cmp expect actual ' -test_expect_success 'deltas for typechange' ' +test_expect_success PIPE 'deltas for typechange' ' reinit_git && cat >expect <<-\EOF && OBJID @@ -815,8 +933,7 @@ test_expect_success 'deltas for typechange' ' PROPS-END link testing 321 EOF - test-svn-fe deleteprop.dump >stream && - git fast-import <stream && + try_dump deleteprop.dump && { git rev-list HEAD | git diff-tree --root --stdin | @@ -840,12 +957,12 @@ test_expect_success 'set up svn repo' ' fi ' -test_expect_success SVNREPO 't9135/svn.dump' ' - git init simple-git && - test-svn-fe "$TEST_DIRECTORY/t9135/svn.dump" >simple.fe && +test_expect_success SVNREPO,PIPE 't9135/svn.dump' ' + mkdir -p simple-git && ( cd simple-git && - git fast-import <../simple.fe + reinit_git && + try_dump "$TEST_DIRECTORY/t9135/svn.dump" ) && ( cd simple-svnco && diff --git a/t/t9130-git-svn-authors-file.sh b/t/t9130-git-svn-authors-file.sh index ec0a106614..b324c491c5 100755 --- a/t/t9130-git-svn-authors-file.sh +++ b/t/t9130-git-svn-authors-file.sh @@ -96,7 +96,6 @@ test_expect_success 'fresh clone with svn.authors-file in config' ' rm -r "$GIT_DIR" && test x = x"$(git config svn.authorsfile)" && test_config="$HOME"/.gitconfig && - unset GIT_CONFIG_NOGLOBAL && unset GIT_DIR && unset GIT_CONFIG && git config --global \ diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index 35c151d7ea..afac5b56a8 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -446,6 +446,8 @@ test_expect_success \ test_expect_success \ 'encode(commit): utf8' \ '. "$TEST_DIRECTORY"/t3901-utf8.txt && + test_when_finished "GIT_AUTHOR_NAME=\"A U Thor\"" && + test_when_finished "GIT_COMMITTER_NAME=\"C O Mitter\"" && echo "UTF-8" >> file && git add file && git commit -F "$TEST_DIRECTORY"/t3900/1-UTF-8.txt && @@ -454,11 +456,13 @@ test_expect_success \ test_expect_success \ 'encode(commit): iso-8859-1' \ '. "$TEST_DIRECTORY"/t3901-8859-1.txt && + test_when_finished "GIT_AUTHOR_NAME=\"A U Thor\"" && + test_when_finished "GIT_COMMITTER_NAME=\"C O Mitter\"" && echo "ISO-8859-1" >> file && git add file && git config i18n.commitencoding ISO-8859-1 && + test_when_finished "git config --unset i18n.commitencoding" && git commit -F "$TEST_DIRECTORY"/t3900/ISO8859-1.txt && - git config --unset i18n.commitencoding && gitweb_run "p=.git;a=commit"' test_expect_success \ diff --git a/t/t9700/test.pl b/t/t9700/test.pl index c15ca2d647..13ba96e21a 100755 --- a/t/t9700/test.pl +++ b/t/t9700/test.pl @@ -113,6 +113,16 @@ like($last_commit, qr/^[0-9a-fA-F]{40}$/, 'rev-parse returned hash'); my $dir_commit = $r2->command_oneline('log', '-n1', '--pretty=format:%H', '.'); isnt($last_commit, $dir_commit, 'log . does not show last commit'); +# commands outside working tree +chdir($abs_repo_dir . '/..'); +my $r3 = Git->repository(Directory => $abs_repo_dir); +my $tmpfile3 = "$abs_repo_dir/file3.tmp"; +open TEMPFILE3, "+>$tmpfile3" or die "Can't open $tmpfile3: $!"; +is($r3->cat_blob($file1hash, \*TEMPFILE3), 15, "cat_blob(outside): size"); +close TEMPFILE3; +unlink $tmpfile3; +chdir($abs_repo_dir); + printf "1..%d\n", Test::More->builder->current_test; my $is_passing = eval { Test::More->is_passing }; diff --git a/t/t9800-git-p4.sh b/t/t9800-git-p4.sh new file mode 100755 index 0000000000..a523473954 --- /dev/null +++ b/t/t9800-git-p4.sh @@ -0,0 +1,139 @@ +#!/bin/sh + +test_description='git-p4 tests' + +. ./test-lib.sh + +( p4 -h && p4d -h ) >/dev/null 2>&1 || { + skip_all='skipping git-p4 tests; no p4 or p4d' + test_done +} + +GITP4=$GIT_BUILD_DIR/contrib/fast-import/git-p4 +P4DPORT=10669 + +db="$TRASH_DIRECTORY/db" +cli="$TRASH_DIRECTORY/cli" +git="$TRASH_DIRECTORY/git" + +test_debug 'echo p4d -q -d -r "$db" -p $P4DPORT' +test_expect_success setup ' + mkdir -p "$db" && + p4d -q -d -r "$db" -p $P4DPORT && + mkdir -p "$cli" && + mkdir -p "$git" && + export P4PORT=localhost:$P4DPORT +' + +test_expect_success 'add p4 files' ' + cd "$cli" && + p4 client -i <<-EOF && + Client: client + Description: client + Root: $cli + View: //depot/... //client/... + EOF + export P4CLIENT=client && + echo file1 >file1 && + p4 add file1 && + p4 submit -d "file1" && + echo file2 >file2 && + p4 add file2 && + p4 submit -d "file2" && + cd "$TRASH_DIRECTORY" +' + +test_expect_success 'basic git-p4 clone' ' + "$GITP4" clone --dest="$git" //depot && + cd "$git" && + git log --oneline >lines && + test_line_count = 1 lines && + cd .. && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'git-p4 clone @all' ' + "$GITP4" clone --dest="$git" //depot@all && + cd "$git" && + git log --oneline >lines && + test_line_count = 2 lines && + cd .. && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'git-p4 sync uninitialized repo' ' + test_create_repo "$git" && + cd "$git" && + test_must_fail "$GITP4" sync && + rm -rf "$git" && mkdir "$git" +' + +# +# Create a git repo by hand. Add a commit so that HEAD is valid. +# Test imports a new p4 repository into a new git branch. +# +test_expect_success 'git-p4 sync new branch' ' + test_create_repo "$git" && + cd "$git" && + test_commit head && + "$GITP4" sync --branch=refs/remotes/p4/depot //depot@all && + git log --oneline p4/depot >lines && + cat lines && + test_line_count = 2 lines && + cd .. && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'exit when p4 fails to produce marshaled output' ' + badp4dir="$TRASH_DIRECTORY/badp4dir" && + mkdir -p "$badp4dir" && + cat >"$badp4dir"/p4 <<-EOF && + #!$SHELL_PATH + exit 1 + EOF + chmod 755 "$badp4dir"/p4 && + PATH="$badp4dir:$PATH" "$GITP4" clone --dest="$git" //depot >errs 2>&1 ; retval=$? && + test $retval -eq 1 && + test_must_fail grep -q Traceback errs +' + +test_expect_success 'add p4 files with wildcards in the names' ' + cd "$cli" && + echo file-wild-hash >file-wild#hash && + echo file-wild-star >file-wild\*star && + echo file-wild-at >file-wild@at && + echo file-wild-percent >file-wild%percent && + p4 add -f file-wild* && + p4 submit -d "file wildcards" && + cd "$TRASH_DIRECTORY" +' + +test_expect_success 'wildcard files git-p4 clone' ' + "$GITP4" clone --dest="$git" //depot && + cd "$git" && + test -f file-wild#hash && + test -f file-wild\*star && + test -f file-wild@at && + test -f file-wild%percent && + cd "$TRASH_DIRECTORY" && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'clone bare' ' + "$GITP4" clone --dest="$git" --bare //depot && + cd "$git" && + test ! -d .git && + bare=`git config --get core.bare` && + test "$bare" = true && + cd "$TRASH_DIRECTORY" && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'shutdown' ' + pid=`pgrep -f p4d` && + test -n "$pid" && + test_debug "ps wl `echo $pid`" && + kill $pid +' + +test_done diff --git a/t/test-lib.sh b/t/test-lib.sh index 0fdc541a7c..abc47f3abc 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -43,36 +43,25 @@ TERM=dumb export LANG LC_ALL PAGER TERM TZ EDITOR=: unset VISUAL -unset GIT_EDITOR -unset AUTHOR_DATE -unset AUTHOR_EMAIL -unset AUTHOR_NAME -unset COMMIT_AUTHOR_EMAIL -unset COMMIT_AUTHOR_NAME unset EMAIL -unset GIT_ALTERNATE_OBJECT_DIRECTORIES -unset GIT_AUTHOR_DATE +unset $(perl -e ' + my @env = keys %ENV; + my $ok = join("|", qw( + TRACE + DEBUG + USE_LOOKUP + TEST + .*_TEST + PROVE + VALGRIND + )); + my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); + print join("\n", @vars); +') GIT_AUTHOR_EMAIL=author@example.com GIT_AUTHOR_NAME='A U Thor' -unset GIT_COMMITTER_DATE GIT_COMMITTER_EMAIL=committer@example.com GIT_COMMITTER_NAME='C O Mitter' -unset GIT_DIFF_OPTS -unset GIT_DIR -unset GIT_WORK_TREE -unset GIT_EXTERNAL_DIFF -unset GIT_INDEX_FILE -unset GIT_OBJECT_DIRECTORY -unset GIT_CEILING_DIRECTORIES -unset SHA1_FILE_DIRECTORIES -unset SHA1_FILE_DIRECTORY -unset GIT_NOTES_REF -unset GIT_NOTES_DISPLAY_REF -unset GIT_NOTES_REWRITE_REF -unset GIT_NOTES_REWRITE_MODE -unset GIT_REFLOG_ACTION -unset GIT_CHERRY_PICK_HELP -unset GIT_QUIET GIT_MERGE_VERBOSITY=5 export GIT_MERGE_VERBOSITY export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME @@ -954,8 +943,8 @@ fi GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt unset GIT_CONFIG GIT_CONFIG_NOSYSTEM=1 -GIT_CONFIG_NOGLOBAL=1 -export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_CONFIG_NOGLOBAL +GIT_ATTR_NOSYSTEM=1 +export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS @@ -1004,14 +993,14 @@ rm -fr "$test" || { exit 1 } +HOME="$TRASH_DIRECTORY" +export HOME + test_create_repo "$test" # Use -P to resolve symlinks in our working directory so that the cwd # in subprocesses like git equals our $PWD (for pathname comparisons). cd -P "$test" || exit 1 -HOME=$(pwd) -export HOME - this_test=${0##*/} this_test=${this_test%%-*} for skp in $GIT_SKIP_TESTS @@ -1079,6 +1068,15 @@ esac test -z "$NO_PERL" && test_set_prereq PERL test -z "$NO_PYTHON" && test_set_prereq PYTHON +# Can we rely on git's output in the C locale? +if test -n "$GETTEXT_POISON" +then + GIT_GETTEXT_POISON=YesPlease + export GIT_GETTEXT_POISON +else + test_set_prereq C_LOCALE_OUTPUT +fi + # test whether the filesystem supports symbolic links ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS rm -f y diff --git a/t/valgrind/default.supp b/t/valgrind/default.supp index 9e013fa3b2..0a6724fcc4 100644 --- a/t/valgrind/default.supp +++ b/t/valgrind/default.supp @@ -43,3 +43,9 @@ fun:write_buffer fun:write_loose_object } + +{ + ignore-sse-strlen-invalid-read-size + Memcheck:Addr4 + fun:copy_ref +} |