diff options
Diffstat (limited to 't')
500 files changed, 27987 insertions, 5445 deletions
diff --git a/t/Makefile b/t/Makefile index 43b15e36ae..d613935f14 100644 --- a/t/Makefile +++ b/t/Makefile @@ -27,7 +27,6 @@ PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH)) TEST_RESULTS_DIRECTORY_SQ = $(subst ','\'',$(TEST_RESULTS_DIRECTORY)) T = $(sort $(wildcard t[0-9][0-9][0-9][0-9]-*.sh)) -TSVN = $(sort $(wildcard t91[0-9][0-9]-*.sh)) TGITWEB = $(sort $(wildcard t95[0-9][0-9]-*.sh)) THELPERS = $(sort $(filter-out $(T),$(wildcard *.sh))) @@ -53,7 +52,8 @@ clean-except-prove-cache: clean: clean-except-prove-cache $(RM) .prove -test-lint: test-lint-duplicates test-lint-executable test-lint-shell-syntax +test-lint: test-lint-duplicates test-lint-executable test-lint-shell-syntax \ + test-lint-filenames test-lint-duplicates: @dups=`echo $(T) | tr ' ' '\n' | sed 's/-.*//' | sort | uniq -d` && \ @@ -68,6 +68,14 @@ test-lint-executable: test-lint-shell-syntax: @'$(PERL_PATH_SQ)' check-non-portable-shell.pl $(T) $(THELPERS) +test-lint-filenames: + @# We do *not* pass a glob to ls-files but use grep instead, to catch + @# non-ASCII characters (which are quoted within double-quotes) + @bad="$$(git -c core.quotepath=true ls-files 2>/dev/null | \ + grep '["*:<>?\\|]')"; \ + test -z "$$bad" || { \ + echo >&2 "non-portable file name(s): $$bad"; exit 1; } + aggregate-results-and-cleanup: $(T) $(MAKE) aggregate-results $(MAKE) clean @@ -77,11 +85,6 @@ aggregate-results: echo "$$f"; \ done | '$(SHELL_PATH_SQ)' ./aggregate-results.sh -# we can test NO_OPTIMIZE_COMMITS independently of LC_ALL -full-svn-test: - $(MAKE) $(TSVN) GIT_SVN_NO_OPTIMIZE_COMMITS=1 LC_ALL=C - $(MAKE) $(TSVN) GIT_SVN_NO_OPTIMIZE_COMMITS=0 LC_ALL=en_US.UTF-8 - gitweb-test: $(MAKE) $(TGITWEB) @@ -84,9 +84,9 @@ appropriately before running "make". -x:: Turn on shell tracing (i.e., `set -x`) during the tests - themselves. Implies `--verbose`. Note that this can cause - failures in some tests which redirect and test the - output of shell functions. Use with caution. + themselves. Implies `--verbose`. Note that in non-bash shells, + this can cause failures in some tests which redirect and test + the output of shell functions. Use with caution. -d:: --debug:: @@ -153,6 +153,12 @@ appropriately before running "make". As the names depend on the tests' file names, it is safe to run the tests with this option in parallel. +--verbose-log:: + Write verbose output to the same logfile as `--tee`, but do + _not_ write it to stdout. Unlike `--tee --verbose`, this option + is safe to use when stdout is being consumed by a TAP parser + like `prove`. Implies `--tee` and `--verbose`. + --with-dashes:: By default tests are run without dashed forms of commands (like git-commit) in the PATH (it only uses @@ -265,7 +271,7 @@ right, so this: $ sh ./t9200-git-cvsexport-commit.sh --run='1-4 !3' will run tests 1, 2, and 4. Items that comes later have higher -precendence. It means that this: +precedence. It means that this: $ sh ./t9200-git-cvsexport-commit.sh --run='!3 1-4' @@ -563,6 +569,11 @@ library for your script to use. argument. This is primarily meant for use during the development of a new test script. + - debug <git-command> + + Run a git command inside a debugger. This is primarily meant for + use when debugging a failing test script. + - test_done Your test script must have test_done at the end. Its purpose diff --git a/t/annotate-tests.sh b/t/annotate-tests.sh index f5c01758ca..093832fef1 100644 --- a/t/annotate-tests.sh +++ b/t/annotate-tests.sh @@ -68,6 +68,13 @@ test_expect_success 'blame 1 author' ' check_count A 2 ' +test_expect_success 'blame by tag objects' ' + git tag -m "test tag" testTag && + git tag -m "test tag #2" testTag2 testTag && + check_count -h testTag A 2 && + check_count -h testTag2 A 2 +' + test_expect_success 'setup B lines' ' echo "2A quick brown fox jumps over the" >>file && echo "lazy dog" >>file && @@ -111,6 +118,10 @@ test_expect_success 'blame 2 authors + 2 merged-in authors' ' check_count A 2 B 1 B1 2 B2 1 ' +test_expect_success 'blame --first-parent blames merge for branch1' ' + check_count --first-parent A 2 B 1 "A U Thor" 2 B2 1 +' + test_expect_success 'blame ancestor' ' check_count -h master A 2 B 2 ' diff --git a/t/helper/.gitignore b/t/helper/.gitignore new file mode 100644 index 0000000000..d6e8b36798 --- /dev/null +++ b/t/helper/.gitignore @@ -0,0 +1,33 @@ +/test-chmtime +/test-ctype +/test-config +/test-date +/test-delta +/test-dump-cache-tree +/test-dump-split-index +/test-dump-untracked-cache +/test-fake-ssh +/test-scrap-cache-tree +/test-genrandom +/test-hashmap +/test-index-version +/test-line-buffer +/test-match-trees +/test-mergesort +/test-mktemp +/test-parse-options +/test-path-utils +/test-prio-queue +/test-read-cache +/test-regex +/test-revision-walking +/test-run-command +/test-sha1 +/test-sha1-array +/test-sigchain +/test-string-list +/test-submodule-config +/test-subprocess +/test-svn-fe +/test-urlmatch-normalization +/test-wildmatch diff --git a/t/helper/test-chmtime.c b/t/helper/test-chmtime.c new file mode 100644 index 0000000000..e760256406 --- /dev/null +++ b/t/helper/test-chmtime.c @@ -0,0 +1,119 @@ +/* + * This program can either change modification time of the given + * file(s) or just print it. The program does not change atime or + * ctime (their values are explicitly preserved). + * + * The mtime can be changed to an absolute value: + * + * test-chmtime =<seconds> file... + * + * Relative to the current time as returned by time(3): + * + * test-chmtime =+<seconds> (or =-<seconds>) file... + * + * Or relative to the current mtime of the file: + * + * test-chmtime <seconds> file... + * test-chmtime +<seconds> (or -<seconds>) file... + * + * Examples: + * + * To just print the mtime use --verbose and set the file mtime offset to 0: + * + * test-chmtime -v +0 file + * + * To set the mtime to current time: + * + * test-chmtime =+0 file + * + */ +#include "git-compat-util.h" +#include <utime.h> + +static const char usage_str[] = "-v|--verbose (+|=|=+|=-|-)<seconds> <file>..."; + +static int timespec_arg(const char *arg, long int *set_time, int *set_eq) +{ + char *test; + const char *timespec = arg; + *set_eq = (*timespec == '=') ? 1 : 0; + if (*set_eq) { + timespec++; + if (*timespec == '+') { + *set_eq = 2; /* relative "in the future" */ + timespec++; + } + } + *set_time = strtol(timespec, &test, 10); + if (*test) { + fprintf(stderr, "Not a base-10 integer: %s\n", arg + 1); + return 0; + } + if ((*set_eq && *set_time < 0) || *set_eq == 2) { + time_t now = time(NULL); + *set_time += now; + } + return 1; +} + +int cmd_main(int argc, const char **argv) +{ + static int verbose; + + int i = 1; + /* no mtime change by default */ + int set_eq = 0; + long int set_time = 0; + + if (argc < 3) + goto usage; + + if (strcmp(argv[i], "--verbose") == 0 || strcmp(argv[i], "-v") == 0) { + verbose = 1; + ++i; + } + if (timespec_arg(argv[i], &set_time, &set_eq)) + ++i; + else + goto usage; + + for (; i < argc; i++) { + struct stat sb; + struct utimbuf utb; + + if (stat(argv[i], &sb) < 0) { + fprintf(stderr, "Failed to stat %s: %s\n", + argv[i], strerror(errno)); + return 1; + } + +#ifdef GIT_WINDOWS_NATIVE + if (!(sb.st_mode & S_IWUSR) && + chmod(argv[i], sb.st_mode | S_IWUSR)) { + fprintf(stderr, "Could not make user-writable %s: %s", + argv[i], strerror(errno)); + return 1; + } +#endif + + utb.actime = sb.st_atime; + utb.modtime = set_eq ? set_time : sb.st_mtime + set_time; + + if (verbose) { + uintmax_t mtime = utb.modtime < 0 ? 0: utb.modtime; + printf("%"PRIuMAX"\t%s\n", mtime, argv[i]); + } + + if (utb.modtime != sb.st_mtime && utime(argv[i], &utb) < 0) { + fprintf(stderr, "Failed to modify time on %s: %s\n", + argv[i], strerror(errno)); + return 1; + } + } + + return 0; + +usage: + fprintf(stderr, "usage: %s %s\n", argv[0], usage_str); + return 1; +} diff --git a/t/helper/test-config.c b/t/helper/test-config.c new file mode 100644 index 0000000000..83a4f2ab86 --- /dev/null +++ b/t/helper/test-config.c @@ -0,0 +1,191 @@ +#include "cache.h" +#include "string-list.h" + +/* + * This program exposes the C API of the configuration mechanism + * as a set of simple commands in order to facilitate testing. + * + * Reads stdin and prints result of command to stdout: + * + * get_value -> prints the value with highest priority for the entered key + * + * get_value_multi -> prints all values for the entered key in increasing order + * of priority + * + * get_int -> print integer value for the entered key or die + * + * get_bool -> print bool value for the entered key or die + * + * get_string -> print string value for the entered key or die + * + * configset_get_value -> returns value with the highest priority for the entered key + * from a config_set constructed from files entered as arguments. + * + * configset_get_value_multi -> returns value_list for the entered key sorted in + * ascending order of priority from a config_set + * constructed from files entered as arguments. + * + * iterate -> iterate over all values using git_config(), and print some + * data for each + * + * Examples: + * + * To print the value with highest priority for key "foo.bAr Baz.rock": + * test-config get_value "foo.bAr Baz.rock" + * + */ + +static const char *scope_name(enum config_scope scope) +{ + switch (scope) { + case CONFIG_SCOPE_SYSTEM: + return "system"; + case CONFIG_SCOPE_GLOBAL: + return "global"; + case CONFIG_SCOPE_REPO: + return "repo"; + case CONFIG_SCOPE_CMDLINE: + return "cmdline"; + default: + return "unknown"; + } +} +static int iterate_cb(const char *var, const char *value, void *data) +{ + static int nr; + + if (nr++) + putchar('\n'); + + printf("key=%s\n", var); + printf("value=%s\n", value ? value : "(null)"); + printf("origin=%s\n", current_config_origin_type()); + printf("name=%s\n", current_config_name()); + printf("scope=%s\n", scope_name(current_config_scope())); + + return 0; +} + +int cmd_main(int argc, const char **argv) +{ + int i, val; + const char *v; + const struct string_list *strptr; + struct config_set cs; + + setup_git_directory(); + + git_configset_init(&cs); + + if (argc < 2) { + fprintf(stderr, "Please, provide a command name on the command-line\n"); + goto exit1; + } else if (argc == 3 && !strcmp(argv[1], "get_value")) { + if (!git_config_get_value(argv[2], &v)) { + if (!v) + printf("(NULL)\n"); + else + printf("%s\n", v); + goto exit0; + } else { + printf("Value not found for \"%s\"\n", argv[2]); + goto exit1; + } + } else if (argc == 3 && !strcmp(argv[1], "get_value_multi")) { + strptr = git_config_get_value_multi(argv[2]); + if (strptr) { + for (i = 0; i < strptr->nr; i++) { + v = strptr->items[i].string; + if (!v) + printf("(NULL)\n"); + else + printf("%s\n", v); + } + goto exit0; + } else { + printf("Value not found for \"%s\"\n", argv[2]); + goto exit1; + } + } else if (argc == 3 && !strcmp(argv[1], "get_int")) { + if (!git_config_get_int(argv[2], &val)) { + printf("%d\n", val); + goto exit0; + } else { + printf("Value not found for \"%s\"\n", argv[2]); + goto exit1; + } + } else if (argc == 3 && !strcmp(argv[1], "get_bool")) { + if (!git_config_get_bool(argv[2], &val)) { + printf("%d\n", val); + goto exit0; + } else { + printf("Value not found for \"%s\"\n", argv[2]); + goto exit1; + } + } else if (argc == 3 && !strcmp(argv[1], "get_string")) { + if (!git_config_get_string_const(argv[2], &v)) { + printf("%s\n", v); + goto exit0; + } else { + printf("Value not found for \"%s\"\n", argv[2]); + goto exit1; + } + } else if (!strcmp(argv[1], "configset_get_value")) { + for (i = 3; i < argc; i++) { + int err; + if ((err = git_configset_add_file(&cs, argv[i]))) { + fprintf(stderr, "Error (%d) reading configuration file %s.\n", err, argv[i]); + goto exit2; + } + } + if (!git_configset_get_value(&cs, argv[2], &v)) { + if (!v) + printf("(NULL)\n"); + else + printf("%s\n", v); + goto exit0; + } else { + printf("Value not found for \"%s\"\n", argv[2]); + goto exit1; + } + } else if (!strcmp(argv[1], "configset_get_value_multi")) { + for (i = 3; i < argc; i++) { + int err; + if ((err = git_configset_add_file(&cs, argv[i]))) { + fprintf(stderr, "Error (%d) reading configuration file %s.\n", err, argv[i]); + goto exit2; + } + } + strptr = git_configset_get_value_multi(&cs, argv[2]); + if (strptr) { + for (i = 0; i < strptr->nr; i++) { + v = strptr->items[i].string; + if (!v) + printf("(NULL)\n"); + else + printf("%s\n", v); + } + goto exit0; + } else { + printf("Value not found for \"%s\"\n", argv[2]); + goto exit1; + } + } else if (!strcmp(argv[1], "iterate")) { + git_config(iterate_cb, NULL); + goto exit0; + } + + die("%s: Please check the syntax and the function name", argv[0]); + +exit0: + git_configset_clear(&cs); + return 0; + +exit1: + git_configset_clear(&cs); + return 1; + +exit2: + git_configset_clear(&cs); + return 2; +} diff --git a/t/helper/test-ctype.c b/t/helper/test-ctype.c new file mode 100644 index 0000000000..bb72c47df5 --- /dev/null +++ b/t/helper/test-ctype.c @@ -0,0 +1,42 @@ +#include "cache.h" + +static int rc; + +static void report_error(const char *class, int ch) +{ + printf("%s classifies char %d (0x%02x) wrongly\n", class, ch, ch); + rc = 1; +} + +static int is_in(const char *s, int ch) +{ + /* We can't find NUL using strchr. It's classless anyway. */ + if (ch == '\0') + return 0; + return !!strchr(s, ch); +} + +#define TEST_CLASS(t,s) { \ + int i; \ + for (i = 0; i < 256; i++) { \ + if (is_in(s, i) != t(i)) \ + report_error(#t, i); \ + } \ +} + +#define DIGIT "0123456789" +#define LOWER "abcdefghijklmnopqrstuvwxyz" +#define UPPER "ABCDEFGHIJKLMNOPQRSTUVWXYZ" + +int cmd_main(int argc, const char **argv) +{ + TEST_CLASS(isdigit, DIGIT); + TEST_CLASS(isspace, " \n\r\t"); + TEST_CLASS(isalpha, LOWER UPPER); + TEST_CLASS(isalnum, LOWER UPPER DIGIT); + TEST_CLASS(is_glob_special, "*?[\\"); + TEST_CLASS(is_regex_special, "$()*+.?[\\^{|"); + TEST_CLASS(is_pathspec_magic, "!\"#%&',-/:;<=>@_`~"); + + return rc; +} diff --git a/t/helper/test-date.c b/t/helper/test-date.c new file mode 100644 index 0000000000..506054bcd5 --- /dev/null +++ b/t/helper/test-date.c @@ -0,0 +1,99 @@ +#include "cache.h" + +static const char *usage_msg = "\n" +" test-date relative [time_t]...\n" +" test-date show:<format> [time_t]...\n" +" test-date parse [date]...\n" +" test-date approxidate [date]...\n"; + +static void show_relative_dates(const char **argv, struct timeval *now) +{ + struct strbuf buf = STRBUF_INIT; + + for (; *argv; argv++) { + time_t t = atoi(*argv); + show_date_relative(t, 0, now, &buf); + printf("%s -> %s\n", *argv, buf.buf); + } + strbuf_release(&buf); +} + +static void show_dates(const char **argv, const char *format) +{ + struct date_mode mode; + + parse_date_format(format, &mode); + for (; *argv; argv++) { + char *arg; + time_t t; + int tz; + + /* + * Do not use our normal timestamp parsing here, as the point + * is to test the formatting code in isolation. + */ + t = strtol(*argv, &arg, 10); + while (*arg == ' ') + arg++; + tz = atoi(arg); + + printf("%s -> %s\n", *argv, show_date(t, tz, &mode)); + } +} + +static void parse_dates(const char **argv, struct timeval *now) +{ + struct strbuf result = STRBUF_INIT; + + for (; *argv; argv++) { + unsigned long t; + int tz; + + strbuf_reset(&result); + parse_date(*argv, &result); + if (sscanf(result.buf, "%lu %d", &t, &tz) == 2) + printf("%s -> %s\n", + *argv, show_date(t, tz, DATE_MODE(ISO8601))); + else + printf("%s -> bad\n", *argv); + } + strbuf_release(&result); +} + +static void parse_approxidate(const char **argv, struct timeval *now) +{ + for (; *argv; argv++) { + time_t t; + t = approxidate_relative(*argv, now); + printf("%s -> %s\n", *argv, show_date(t, 0, DATE_MODE(ISO8601))); + } +} + +int cmd_main(int argc, const char **argv) +{ + struct timeval now; + const char *x; + + x = getenv("TEST_DATE_NOW"); + if (x) { + now.tv_sec = atoi(x); + now.tv_usec = 0; + } + else + gettimeofday(&now, NULL); + + argv++; + if (!*argv) + usage(usage_msg); + if (!strcmp(*argv, "relative")) + show_relative_dates(argv+1, &now); + else if (skip_prefix(*argv, "show:", &x)) + show_dates(argv+1, x); + else if (!strcmp(*argv, "parse")) + parse_dates(argv+1, &now); + else if (!strcmp(*argv, "approxidate")) + parse_approxidate(argv+1, &now); + else + usage(usage_msg); + return 0; +} diff --git a/t/helper/test-delta.c b/t/helper/test-delta.c new file mode 100644 index 0000000000..59937dc1be --- /dev/null +++ b/t/helper/test-delta.c @@ -0,0 +1,78 @@ +/* + * test-delta.c: test code to exercise diff-delta.c and patch-delta.c + * + * (C) 2005 Nicolas Pitre <nico@fluxnic.net> + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "git-compat-util.h" +#include "delta.h" +#include "cache.h" + +static const char usage_str[] = + "test-delta (-d|-p) <from_file> <data_file> <out_file>"; + +int cmd_main(int argc, const char **argv) +{ + int fd; + struct stat st; + void *from_buf, *data_buf, *out_buf; + unsigned long from_size, data_size, out_size; + + if (argc != 5 || (strcmp(argv[1], "-d") && strcmp(argv[1], "-p"))) { + fprintf(stderr, "usage: %s\n", usage_str); + return 1; + } + + fd = open(argv[2], O_RDONLY); + if (fd < 0 || fstat(fd, &st)) { + perror(argv[2]); + return 1; + } + from_size = st.st_size; + from_buf = mmap(NULL, from_size, PROT_READ, MAP_PRIVATE, fd, 0); + if (from_buf == MAP_FAILED) { + perror(argv[2]); + close(fd); + return 1; + } + close(fd); + + fd = open(argv[3], O_RDONLY); + if (fd < 0 || fstat(fd, &st)) { + perror(argv[3]); + return 1; + } + data_size = st.st_size; + data_buf = mmap(NULL, data_size, PROT_READ, MAP_PRIVATE, fd, 0); + if (data_buf == MAP_FAILED) { + perror(argv[3]); + close(fd); + return 1; + } + close(fd); + + if (argv[1][1] == 'd') + out_buf = diff_delta(from_buf, from_size, + data_buf, data_size, + &out_size, 0); + else + out_buf = patch_delta(from_buf, from_size, + data_buf, data_size, + &out_size); + if (!out_buf) { + fprintf(stderr, "delta operation failed (returned NULL)\n"); + return 1; + } + + fd = open (argv[4], O_WRONLY|O_CREAT|O_TRUNC, 0666); + if (fd < 0 || write_in_full(fd, out_buf, out_size) != out_size) { + perror(argv[4]); + return 1; + } + + return 0; +} diff --git a/t/helper/test-dump-cache-tree.c b/t/helper/test-dump-cache-tree.c new file mode 100644 index 0000000000..7af116d49e --- /dev/null +++ b/t/helper/test-dump-cache-tree.c @@ -0,0 +1,68 @@ +#include "cache.h" +#include "tree.h" +#include "cache-tree.h" + + +static void dump_one(struct cache_tree *it, const char *pfx, const char *x) +{ + if (it->entry_count < 0) + printf("%-40s %s%s (%d subtrees)\n", + "invalid", x, pfx, it->subtree_nr); + else + printf("%s %s%s (%d entries, %d subtrees)\n", + sha1_to_hex(it->sha1), x, pfx, + it->entry_count, it->subtree_nr); +} + +static int dump_cache_tree(struct cache_tree *it, + struct cache_tree *ref, + const char *pfx) +{ + int i; + int errs = 0; + + if (!it || !ref) + /* missing in either */ + return 0; + + if (it->entry_count < 0) { + /* invalid */ + dump_one(it, pfx, ""); + dump_one(ref, pfx, "#(ref) "); + } + else { + dump_one(it, pfx, ""); + if (hashcmp(it->sha1, ref->sha1) || + ref->entry_count != it->entry_count || + ref->subtree_nr != it->subtree_nr) { + /* claims to be valid but is lying */ + dump_one(ref, pfx, "#(ref) "); + errs = 1; + } + } + + for (i = 0; i < it->subtree_nr; i++) { + char path[PATH_MAX]; + struct cache_tree_sub *down = it->down[i]; + struct cache_tree_sub *rdwn; + + rdwn = cache_tree_sub(ref, down->name); + xsnprintf(path, sizeof(path), "%s%.*s/", pfx, down->namelen, down->name); + if (dump_cache_tree(down->cache_tree, rdwn->cache_tree, path)) + errs = 1; + } + return errs; +} + +int cmd_main(int ac, const char **av) +{ + struct index_state istate; + struct cache_tree *another = cache_tree(); + setup_git_directory(); + if (read_cache() < 0) + die("unable to read index file"); + istate = the_index; + istate.cache_tree = another; + cache_tree_update(&istate, WRITE_TREE_DRY_RUN); + return dump_cache_tree(active_cache_tree, another, ""); +} diff --git a/t/helper/test-dump-split-index.c b/t/helper/test-dump-split-index.c new file mode 100644 index 0000000000..e44430b699 --- /dev/null +++ b/t/helper/test-dump-split-index.c @@ -0,0 +1,36 @@ +#include "cache.h" +#include "split-index.h" +#include "ewah/ewok.h" + +static void show_bit(size_t pos, void *data) +{ + printf(" %d", (int)pos); +} + +int cmd_main(int ac, const char **av) +{ + struct split_index *si; + int i; + + do_read_index(&the_index, av[1], 1); + printf("own %s\n", sha1_to_hex(the_index.sha1)); + si = the_index.split_index; + if (!si) { + printf("not a split index\n"); + return 0; + } + printf("base %s\n", sha1_to_hex(si->base_sha1)); + for (i = 0; i < the_index.cache_nr; i++) { + struct cache_entry *ce = the_index.cache[i]; + printf("%06o %s %d\t%s\n", ce->ce_mode, + oid_to_hex(&ce->oid), ce_stage(ce), ce->name); + } + printf("replacements:"); + if (si->replace_bitmap) + ewah_each_bit(si->replace_bitmap, show_bit, NULL); + printf("\ndeletions:"); + if (si->delete_bitmap) + ewah_each_bit(si->delete_bitmap, show_bit, NULL); + printf("\n"); + return 0; +} diff --git a/t/helper/test-dump-untracked-cache.c b/t/helper/test-dump-untracked-cache.c new file mode 100644 index 0000000000..f752532ffb --- /dev/null +++ b/t/helper/test-dump-untracked-cache.c @@ -0,0 +1,64 @@ +#include "cache.h" +#include "dir.h" + +static int compare_untracked(const void *a_, const void *b_) +{ + const char *const *a = a_; + const char *const *b = b_; + return strcmp(*a, *b); +} + +static int compare_dir(const void *a_, const void *b_) +{ + const struct untracked_cache_dir *const *a = a_; + const struct untracked_cache_dir *const *b = b_; + return strcmp((*a)->name, (*b)->name); +} + +static void dump(struct untracked_cache_dir *ucd, struct strbuf *base) +{ + int i, len; + QSORT(ucd->untracked, ucd->untracked_nr, compare_untracked); + QSORT(ucd->dirs, ucd->dirs_nr, compare_dir); + len = base->len; + strbuf_addf(base, "%s/", ucd->name); + printf("%s %s", base->buf, + sha1_to_hex(ucd->exclude_sha1)); + if (ucd->recurse) + fputs(" recurse", stdout); + if (ucd->check_only) + fputs(" check_only", stdout); + if (ucd->valid) + fputs(" valid", stdout); + printf("\n"); + for (i = 0; i < ucd->untracked_nr; i++) + printf("%s\n", ucd->untracked[i]); + for (i = 0; i < ucd->dirs_nr; i++) + dump(ucd->dirs[i], base); + strbuf_setlen(base, len); +} + +int cmd_main(int ac, const char **av) +{ + struct untracked_cache *uc; + struct strbuf base = STRBUF_INIT; + + /* Hack to avoid modifying the untracked cache when we read it */ + ignore_untracked_cache_config = 1; + + setup_git_directory(); + if (read_cache() < 0) + die("unable to read index file"); + uc = the_index.untracked; + if (!uc) { + printf("no untracked cache\n"); + return 0; + } + printf("info/exclude %s\n", sha1_to_hex(uc->ss_info_exclude.sha1)); + printf("core.excludesfile %s\n", sha1_to_hex(uc->ss_excludes_file.sha1)); + printf("exclude_per_dir %s\n", uc->exclude_per_dir); + printf("flags %08x\n", uc->dir_flags); + if (uc->root) + dump(uc->root, &base); + return 0; +} diff --git a/t/helper/test-fake-ssh.c b/t/helper/test-fake-ssh.c new file mode 100644 index 0000000000..12beee99ad --- /dev/null +++ b/t/helper/test-fake-ssh.c @@ -0,0 +1,30 @@ +#include "git-compat-util.h" +#include "run-command.h" +#include "strbuf.h" + +int cmd_main(int argc, const char **argv) +{ + const char *trash_directory = getenv("TRASH_DIRECTORY"); + struct strbuf buf = STRBUF_INIT; + FILE *f; + int i; + const char *child_argv[] = { NULL, NULL }; + + /* First, print all parameters into $TRASH_DIRECTORY/ssh-output */ + if (!trash_directory) + die("Need a TRASH_DIRECTORY!"); + strbuf_addf(&buf, "%s/ssh-output", trash_directory); + f = fopen(buf.buf, "w"); + if (!f) + die("Could not write to %s", buf.buf); + for (i = 0; i < argc; i++) + fprintf(f, "%s%s", i > 0 ? " " : "", i > 0 ? argv[i] : "ssh:"); + fprintf(f, "\n"); + fclose(f); + + /* Now, evaluate the *last* parameter */ + if (argc < 2) + return 0; + child_argv[0] = argv[argc - 1]; + return run_command_v_opt(child_argv, RUN_USING_SHELL); +} diff --git a/t/helper/test-genrandom.c b/t/helper/test-genrandom.c new file mode 100644 index 0000000000..8d11d22d98 --- /dev/null +++ b/t/helper/test-genrandom.c @@ -0,0 +1,33 @@ +/* + * Simple random data generator used to create reproducible test files. + * This is inspired from POSIX.1-2001 implementation example for rand(). + * Copyright (C) 2007 by Nicolas Pitre, licensed under the GPL version 2. + */ + +#include "git-compat-util.h" + +int cmd_main(int argc, const char **argv) +{ + unsigned long count, next = 0; + unsigned char *c; + + if (argc < 2 || argc > 3) { + fprintf(stderr, "usage: %s <seed_string> [<size>]\n", argv[0]); + return 1; + } + + c = (unsigned char *) argv[1]; + do { + next = next * 11 + *c; + } while (*c++); + + count = (argc == 3) ? strtoul(argv[2], NULL, 0) : -1L; + + while (count--) { + next = next * 1103515245 + 12345; + if (putchar((next >> 16) & 0xff) == EOF) + return -1; + } + + return 0; +} diff --git a/t/helper/test-hashmap.c b/t/helper/test-hashmap.c new file mode 100644 index 0000000000..7aa9440e27 --- /dev/null +++ b/t/helper/test-hashmap.c @@ -0,0 +1,264 @@ +#include "git-compat-util.h" +#include "hashmap.h" + +struct test_entry +{ + struct hashmap_entry ent; + /* key and value as two \0-terminated strings */ + char key[FLEX_ARRAY]; +}; + +static const char *get_value(const struct test_entry *e) +{ + return e->key + strlen(e->key) + 1; +} + +static int test_entry_cmp(const struct test_entry *e1, + const struct test_entry *e2, const char* key) +{ + return strcmp(e1->key, key ? key : e2->key); +} + +static int test_entry_cmp_icase(const struct test_entry *e1, + const struct test_entry *e2, const char* key) +{ + return strcasecmp(e1->key, key ? key : e2->key); +} + +static struct test_entry *alloc_test_entry(int hash, char *key, int klen, + char *value, int vlen) +{ + struct test_entry *entry = malloc(sizeof(struct test_entry) + klen + + vlen + 2); + hashmap_entry_init(entry, hash); + memcpy(entry->key, key, klen + 1); + memcpy(entry->key + klen + 1, value, vlen + 1); + return entry; +} + +#define HASH_METHOD_FNV 0 +#define HASH_METHOD_I 1 +#define HASH_METHOD_IDIV10 2 +#define HASH_METHOD_0 3 +#define HASH_METHOD_X2 4 +#define TEST_SPARSE 8 +#define TEST_ADD 16 +#define TEST_SIZE 100000 + +static unsigned int hash(unsigned int method, unsigned int i, const char *key) +{ + unsigned int hash = 0; + switch (method & 3) + { + case HASH_METHOD_FNV: + hash = strhash(key); + break; + case HASH_METHOD_I: + hash = i; + break; + case HASH_METHOD_IDIV10: + hash = i / 10; + break; + case HASH_METHOD_0: + hash = 0; + break; + } + + if (method & HASH_METHOD_X2) + hash = 2 * hash; + return hash; +} + +/* + * Test performance of hashmap.[ch] + * Usage: time echo "perfhashmap method rounds" | test-hashmap + */ +static void perf_hashmap(unsigned int method, unsigned int rounds) +{ + struct hashmap map; + char buf[16]; + struct test_entry **entries; + unsigned int *hashes; + unsigned int i, j; + + entries = malloc(TEST_SIZE * sizeof(struct test_entry *)); + hashes = malloc(TEST_SIZE * sizeof(int)); + for (i = 0; i < TEST_SIZE; i++) { + snprintf(buf, sizeof(buf), "%i", i); + entries[i] = alloc_test_entry(0, buf, strlen(buf), "", 0); + hashes[i] = hash(method, i, entries[i]->key); + } + + if (method & TEST_ADD) { + /* test adding to the map */ + for (j = 0; j < rounds; j++) { + hashmap_init(&map, (hashmap_cmp_fn) test_entry_cmp, 0); + + /* add entries */ + for (i = 0; i < TEST_SIZE; i++) { + hashmap_entry_init(entries[i], hashes[i]); + hashmap_add(&map, entries[i]); + } + + hashmap_free(&map, 0); + } + } else { + /* test map lookups */ + hashmap_init(&map, (hashmap_cmp_fn) test_entry_cmp, 0); + + /* fill the map (sparsely if specified) */ + j = (method & TEST_SPARSE) ? TEST_SIZE / 10 : TEST_SIZE; + for (i = 0; i < j; i++) { + hashmap_entry_init(entries[i], hashes[i]); + hashmap_add(&map, entries[i]); + } + + for (j = 0; j < rounds; j++) { + for (i = 0; i < TEST_SIZE; i++) { + hashmap_get_from_hash(&map, hashes[i], + entries[i]->key); + } + } + + hashmap_free(&map, 0); + } +} + +#define DELIM " \t\r\n" + +/* + * Read stdin line by line and print result of commands to stdout: + * + * hash key -> strhash(key) memhash(key) strihash(key) memihash(key) + * put key value -> NULL / old value + * get key -> NULL / value + * remove key -> NULL / old value + * iterate -> key1 value1\nkey2 value2\n... + * size -> tablesize numentries + * + * perfhashmap method rounds -> test hashmap.[ch] performance + */ +int cmd_main(int argc, const char **argv) +{ + char line[1024]; + struct hashmap map; + int icase; + + /* init hash map */ + icase = argc > 1 && !strcmp("ignorecase", argv[1]); + hashmap_init(&map, (hashmap_cmp_fn) (icase ? test_entry_cmp_icase + : test_entry_cmp), 0); + + /* process commands from stdin */ + while (fgets(line, sizeof(line), stdin)) { + char *cmd, *p1 = NULL, *p2 = NULL; + int l1 = 0, l2 = 0, hash = 0; + struct test_entry *entry; + + /* break line into command and up to two parameters */ + cmd = strtok(line, DELIM); + /* ignore empty lines */ + if (!cmd || *cmd == '#') + continue; + + p1 = strtok(NULL, DELIM); + if (p1) { + l1 = strlen(p1); + hash = icase ? strihash(p1) : strhash(p1); + p2 = strtok(NULL, DELIM); + if (p2) + l2 = strlen(p2); + } + + if (!strcmp("hash", cmd) && l1) { + + /* print results of different hash functions */ + printf("%u %u %u %u\n", strhash(p1), memhash(p1, l1), + strihash(p1), memihash(p1, l1)); + + } else if (!strcmp("add", cmd) && l1 && l2) { + + /* create entry with key = p1, value = p2 */ + entry = alloc_test_entry(hash, p1, l1, p2, l2); + + /* add to hashmap */ + hashmap_add(&map, entry); + + } else if (!strcmp("put", cmd) && l1 && l2) { + + /* create entry with key = p1, value = p2 */ + entry = alloc_test_entry(hash, p1, l1, p2, l2); + + /* add / replace entry */ + entry = hashmap_put(&map, entry); + + /* print and free replaced entry, if any */ + puts(entry ? get_value(entry) : "NULL"); + free(entry); + + } else if (!strcmp("get", cmd) && l1) { + + /* lookup entry in hashmap */ + entry = hashmap_get_from_hash(&map, hash, p1); + + /* print result */ + if (!entry) + puts("NULL"); + while (entry) { + puts(get_value(entry)); + entry = hashmap_get_next(&map, entry); + } + + } else if (!strcmp("remove", cmd) && l1) { + + /* setup static key */ + struct hashmap_entry key; + hashmap_entry_init(&key, hash); + + /* remove entry from hashmap */ + entry = hashmap_remove(&map, &key, p1); + + /* print result and free entry*/ + puts(entry ? get_value(entry) : "NULL"); + free(entry); + + } else if (!strcmp("iterate", cmd)) { + + struct hashmap_iter iter; + hashmap_iter_init(&map, &iter); + while ((entry = hashmap_iter_next(&iter))) + printf("%s %s\n", entry->key, get_value(entry)); + + } else if (!strcmp("size", cmd)) { + + /* print table sizes */ + printf("%u %u\n", map.tablesize, map.size); + + } else if (!strcmp("intern", cmd) && l1) { + + /* test that strintern works */ + const char *i1 = strintern(p1); + const char *i2 = strintern(p1); + if (strcmp(i1, p1)) + printf("strintern(%s) returns %s\n", p1, i1); + else if (i1 == p1) + printf("strintern(%s) returns input pointer\n", p1); + else if (i1 != i2) + printf("strintern(%s) != strintern(%s)", i1, i2); + else + printf("%s\n", i1); + + } else if (!strcmp("perfhashmap", cmd) && l1 && l2) { + + perf_hashmap(atoi(p1), atoi(p2)); + + } else { + + printf("Unknown command %s\n", cmd); + + } + } + + hashmap_free(&map, 1); + return 0; +} diff --git a/t/helper/test-index-version.c b/t/helper/test-index-version.c new file mode 100644 index 0000000000..f569f6b7ef --- /dev/null +++ b/t/helper/test-index-version.c @@ -0,0 +1,14 @@ +#include "cache.h" + +int cmd_main(int argc, const char **argv) +{ + struct cache_header hdr; + int version; + + memset(&hdr,0,sizeof(hdr)); + if (read(0, &hdr, sizeof(hdr)) != sizeof(hdr)) + return 0; + version = ntohl(hdr.hdr_version); + printf("%d\n", version); + return 0; +} diff --git a/t/helper/test-line-buffer.c b/t/helper/test-line-buffer.c new file mode 100644 index 0000000000..81575fe2ab --- /dev/null +++ b/t/helper/test-line-buffer.c @@ -0,0 +1,91 @@ +/* + * test-line-buffer.c: code to exercise the svn importer's input helper + */ + +#include "git-compat-util.h" +#include "strbuf.h" +#include "vcs-svn/line_buffer.h" + +static uint32_t strtouint32(const char *s) +{ + char *end; + uintmax_t n = strtoumax(s, &end, 10); + if (*s == '\0' || *end != '\0') + die("invalid count: %s", s); + return (uint32_t) n; +} + +static void handle_command(const char *command, const char *arg, struct line_buffer *buf) +{ + switch (*command) { + case 'b': + if (starts_with(command, "binary ")) { + struct strbuf sb = STRBUF_INIT; + strbuf_addch(&sb, '>'); + buffer_read_binary(buf, &sb, strtouint32(arg)); + fwrite(sb.buf, 1, sb.len, stdout); + strbuf_release(&sb); + return; + } + case 'c': + if (starts_with(command, "copy ")) { + buffer_copy_bytes(buf, strtouint32(arg)); + return; + } + case 's': + if (starts_with(command, "skip ")) { + buffer_skip_bytes(buf, strtouint32(arg)); + return; + } + default: + die("unrecognized command: %s", command); + } +} + +static void handle_line(const char *line, struct line_buffer *stdin_buf) +{ + const char *arg = strchr(line, ' '); + if (!arg) + die("no argument in line: %s", line); + handle_command(line, arg + 1, stdin_buf); +} + +int cmd_main(int argc, const char **argv) +{ + struct line_buffer stdin_buf = LINE_BUFFER_INIT; + struct line_buffer file_buf = LINE_BUFFER_INIT; + struct line_buffer *input = &stdin_buf; + const char *filename; + char *s; + + if (argc == 1) + filename = NULL; + else if (argc == 2) + filename = argv[1]; + else + usage("test-line-buffer [file | &fd] < script"); + + if (buffer_init(&stdin_buf, NULL)) + die_errno("open error"); + if (filename) { + if (*filename == '&') { + if (buffer_fdinit(&file_buf, strtouint32(filename + 1))) + die_errno("error opening fd %s", filename + 1); + } else { + if (buffer_init(&file_buf, filename)) + die_errno("error opening %s", filename); + } + input = &file_buf; + } + + while ((s = buffer_read_line(&stdin_buf))) + handle_line(s, input); + + if (filename && buffer_deinit(&file_buf)) + die("error reading from %s", filename); + if (buffer_deinit(&stdin_buf)) + die("input error"); + if (ferror(stdout)) + die("output error"); + return 0; +} diff --git a/t/helper/test-match-trees.c b/t/helper/test-match-trees.c new file mode 100644 index 0000000000..e939502863 --- /dev/null +++ b/t/helper/test-match-trees.c @@ -0,0 +1,26 @@ +#include "cache.h" +#include "tree.h" + +int cmd_main(int ac, const char **av) +{ + struct object_id hash1, hash2, shifted; + struct tree *one, *two; + + setup_git_directory(); + + if (get_oid(av[1], &hash1)) + die("cannot parse %s as an object name", av[1]); + if (get_oid(av[2], &hash2)) + die("cannot parse %s as an object name", av[2]); + one = parse_tree_indirect(hash1.hash); + if (!one) + die("not a tree-ish %s", av[1]); + two = parse_tree_indirect(hash2.hash); + if (!two) + die("not a tree-ish %s", av[2]); + + shift_tree(&one->object.oid, &two->object.oid, &shifted, -1); + printf("shifted: %s\n", oid_to_hex(&shifted)); + + exit(0); +} diff --git a/t/helper/test-mergesort.c b/t/helper/test-mergesort.c new file mode 100644 index 0000000000..335cf6b626 --- /dev/null +++ b/t/helper/test-mergesort.c @@ -0,0 +1,52 @@ +#include "cache.h" +#include "mergesort.h" + +struct line { + char *text; + struct line *next; +}; + +static void *get_next(const void *a) +{ + return ((const struct line *)a)->next; +} + +static void set_next(void *a, void *b) +{ + ((struct line *)a)->next = b; +} + +static int compare_strings(const void *a, const void *b) +{ + const struct line *x = a, *y = b; + return strcmp(x->text, y->text); +} + +int cmd_main(int argc, const char **argv) +{ + struct line *line, *p = NULL, *lines = NULL; + struct strbuf sb = STRBUF_INIT; + + for (;;) { + if (strbuf_getwholeline(&sb, stdin, '\n')) + break; + line = xmalloc(sizeof(struct line)); + line->text = strbuf_detach(&sb, NULL); + if (p) { + line->next = p->next; + p->next = line; + } else { + line->next = NULL; + lines = line; + } + p = line; + } + + lines = llist_mergesort(lines, get_next, set_next, compare_strings); + + while (lines) { + printf("%s", lines->text); + lines = lines->next; + } + return 0; +} diff --git a/t/helper/test-mktemp.c b/t/helper/test-mktemp.c new file mode 100644 index 0000000000..89d9b2f7be --- /dev/null +++ b/t/helper/test-mktemp.c @@ -0,0 +1,14 @@ +/* + * test-mktemp.c: code to exercise the creation of temporary files + */ +#include "git-compat-util.h" + +int cmd_main(int argc, const char **argv) +{ + if (argc != 2) + usage("Expected 1 parameter defining the temporary file template"); + + xmkstemp(xstrdup(argv[1])); + + return 0; +} diff --git a/t/helper/test-parse-options.c b/t/helper/test-parse-options.c new file mode 100644 index 0000000000..a01430c24b --- /dev/null +++ b/t/helper/test-parse-options.c @@ -0,0 +1,179 @@ +#include "cache.h" +#include "parse-options.h" +#include "string-list.h" + +static int boolean = 0; +static int integer = 0; +static unsigned long magnitude = 0; +static unsigned long timestamp; +static int abbrev = 7; +static int verbose = -1; /* unspecified */ +static int dry_run = 0, quiet = 0; +static char *string = NULL; +static char *file = NULL; +static int ambiguous; +static struct string_list list = STRING_LIST_INIT_NODUP; + +static struct { + int called; + const char *arg; + int unset; +} length_cb; + +static int length_callback(const struct option *opt, const char *arg, int unset) +{ + length_cb.called = 1; + length_cb.arg = arg; + length_cb.unset = unset; + + if (unset) + return 1; /* do not support unset */ + + *(int *)opt->value = strlen(arg); + return 0; +} + +static int number_callback(const struct option *opt, const char *arg, int unset) +{ + *(int *)opt->value = strtol(arg, NULL, 10); + return 0; +} + +static int collect_expect(const struct option *opt, const char *arg, int unset) +{ + struct string_list *expect; + struct string_list_item *item; + struct strbuf label = STRBUF_INIT; + const char *colon; + + if (!arg || unset) + die("malformed --expect option"); + + expect = (struct string_list *)opt->value; + colon = strchr(arg, ':'); + if (!colon) + die("malformed --expect option, lacking a colon"); + strbuf_add(&label, arg, colon - arg); + item = string_list_insert(expect, strbuf_detach(&label, NULL)); + if (item->util) + die("malformed --expect option, duplicate %s", label.buf); + item->util = (void *)arg; + return 0; +} + +__attribute__((format (printf,3,4))) +static void show(struct string_list *expect, int *status, const char *fmt, ...) +{ + struct string_list_item *item; + struct strbuf buf = STRBUF_INIT; + va_list args; + + va_start(args, fmt); + strbuf_vaddf(&buf, fmt, args); + va_end(args); + + if (!expect->nr) + printf("%s\n", buf.buf); + else { + char *colon = strchr(buf.buf, ':'); + if (!colon) + die("malformed output format, output lacking colon: %s", fmt); + *colon = '\0'; + item = string_list_lookup(expect, buf.buf); + *colon = ':'; + if (!item) + ; /* not among entries being checked */ + else { + if (strcmp((const char *)item->util, buf.buf)) { + printf("-%s\n", (char *)item->util); + printf("+%s\n", buf.buf); + *status = 1; + } + } + } + strbuf_release(&buf); +} + +int cmd_main(int argc, const char **argv) +{ + const char *prefix = "prefix/"; + const char *usage[] = { + "test-parse-options <options>", + NULL + }; + struct string_list expect = STRING_LIST_INIT_NODUP; + struct option options[] = { + OPT_BOOL(0, "yes", &boolean, "get a boolean"), + OPT_BOOL('D', "no-doubt", &boolean, "begins with 'no-'"), + { OPTION_SET_INT, 'B', "no-fear", &boolean, NULL, + "be brave", PARSE_OPT_NOARG | PARSE_OPT_NONEG, NULL, 1 }, + OPT_COUNTUP('b', "boolean", &boolean, "increment by one"), + OPT_BIT('4', "or4", &boolean, + "bitwise-or boolean with ...0100", 4), + OPT_NEGBIT(0, "neg-or4", &boolean, "same as --no-or4", 4), + OPT_GROUP(""), + OPT_INTEGER('i', "integer", &integer, "get a integer"), + OPT_INTEGER('j', NULL, &integer, "get a integer, too"), + OPT_MAGNITUDE('m', "magnitude", &magnitude, "get a magnitude"), + OPT_SET_INT(0, "set23", &integer, "set integer to 23", 23), + OPT_DATE('t', NULL, ×tamp, "get timestamp of <time>"), + OPT_CALLBACK('L', "length", &integer, "str", + "get length of <str>", length_callback), + OPT_FILENAME('F', "file", &file, "set file to <file>"), + OPT_GROUP("String options"), + OPT_STRING('s', "string", &string, "string", "get a string"), + OPT_STRING(0, "string2", &string, "str", "get another string"), + OPT_STRING(0, "st", &string, "st", "get another string (pervert ordering)"), + OPT_STRING('o', NULL, &string, "str", "get another string"), + OPT_NOOP_NOARG(0, "obsolete"), + OPT_STRING_LIST(0, "list", &list, "str", "add str to list"), + OPT_GROUP("Magic arguments"), + OPT_ARGUMENT("quux", "means --quux"), + OPT_NUMBER_CALLBACK(&integer, "set integer to NUM", + number_callback), + { OPTION_COUNTUP, '+', NULL, &boolean, NULL, "same as -b", + PARSE_OPT_NOARG | PARSE_OPT_NONEG | PARSE_OPT_NODASH }, + { OPTION_COUNTUP, 0, "ambiguous", &ambiguous, NULL, + "positive ambiguity", PARSE_OPT_NOARG | PARSE_OPT_NONEG }, + { OPTION_COUNTUP, 0, "no-ambiguous", &ambiguous, NULL, + "negative ambiguity", PARSE_OPT_NOARG | PARSE_OPT_NONEG }, + OPT_GROUP("Standard options"), + OPT__ABBREV(&abbrev), + OPT__VERBOSE(&verbose, "be verbose"), + OPT__DRY_RUN(&dry_run, "dry run"), + OPT__QUIET(&quiet, "be quiet"), + OPT_CALLBACK(0, "expect", &expect, "string", + "expected output in the variable dump", + collect_expect), + OPT_END(), + }; + int i; + int ret = 0; + + argc = parse_options(argc, (const char **)argv, prefix, options, usage, 0); + + if (length_cb.called) { + const char *arg = length_cb.arg; + int unset = length_cb.unset; + show(&expect, &ret, "Callback: \"%s\", %d", + (arg ? arg : "not set"), unset); + } + show(&expect, &ret, "boolean: %d", boolean); + show(&expect, &ret, "integer: %d", integer); + show(&expect, &ret, "magnitude: %lu", magnitude); + show(&expect, &ret, "timestamp: %lu", timestamp); + show(&expect, &ret, "string: %s", string ? string : "(not set)"); + show(&expect, &ret, "abbrev: %d", abbrev); + show(&expect, &ret, "verbose: %d", verbose); + show(&expect, &ret, "quiet: %d", quiet); + show(&expect, &ret, "dry run: %s", dry_run ? "yes" : "no"); + show(&expect, &ret, "file: %s", file ? file : "(not set)"); + + for (i = 0; i < list.nr; i++) + show(&expect, &ret, "list: %s", list.items[i].string); + + for (i = 0; i < argc; i++) + show(&expect, &ret, "arg %02d: %s", i, argv[i]); + + return ret; +} diff --git a/t/helper/test-path-utils.c b/t/helper/test-path-utils.c new file mode 100644 index 0000000000..1ebe0f750c --- /dev/null +++ b/t/helper/test-path-utils.c @@ -0,0 +1,262 @@ +#include "cache.h" +#include "string-list.h" + +/* + * A "string_list_each_func_t" function that normalizes an entry from + * GIT_CEILING_DIRECTORIES. If the path is unusable for some reason, + * die with an explanation. + */ +static int normalize_ceiling_entry(struct string_list_item *item, void *unused) +{ + char *ceil = item->string; + + if (!*ceil) + die("Empty path is not supported"); + if (!is_absolute_path(ceil)) + die("Path \"%s\" is not absolute", ceil); + if (normalize_path_copy(ceil, ceil) < 0) + die("Path \"%s\" could not be normalized", ceil); + return 1; +} + +static void normalize_argv_string(const char **var, const char *input) +{ + if (!strcmp(input, "<null>")) + *var = NULL; + else if (!strcmp(input, "<empty>")) + *var = ""; + else + *var = input; + + if (*var && (**var == '<' || **var == '(')) + die("Bad value: %s\n", input); +} + +struct test_data { + const char *from; /* input: transform from this ... */ + const char *to; /* output: ... to this. */ + const char *alternative; /* output: ... or this. */ +}; + +static int test_function(struct test_data *data, char *(*func)(char *input), + const char *funcname) +{ + int failed = 0, i; + char buffer[1024]; + char *to; + + for (i = 0; data[i].to; i++) { + if (!data[i].from) + to = func(NULL); + else { + xsnprintf(buffer, sizeof(buffer), "%s", data[i].from); + to = func(buffer); + } + if (!strcmp(to, data[i].to)) + continue; + if (!data[i].alternative) + error("FAIL: %s(%s) => '%s' != '%s'\n", + funcname, data[i].from, to, data[i].to); + else if (!strcmp(to, data[i].alternative)) + continue; + else + error("FAIL: %s(%s) => '%s' != '%s', '%s'\n", + funcname, data[i].from, to, data[i].to, + data[i].alternative); + failed = 1; + } + return failed; +} + +static struct test_data basename_data[] = { + /* --- POSIX type paths --- */ + { NULL, "." }, + { "", "." }, + { ".", "." }, + { "..", ".." }, + { "/", "/" }, + { "//", "/", "//" }, + { "///", "/", "//" }, + { "////", "/", "//" }, + { "usr", "usr" }, + { "/usr", "usr" }, + { "/usr/", "usr" }, + { "/usr//", "usr" }, + { "/usr/lib", "lib" }, + { "usr/lib", "lib" }, + { "usr/lib///", "lib" }, + +#if defined(__MINGW32__) || defined(_MSC_VER) + /* --- win32 type paths --- */ + { "\\usr", "usr" }, + { "\\usr\\", "usr" }, + { "\\usr\\\\", "usr" }, + { "\\usr\\lib", "lib" }, + { "usr\\lib", "lib" }, + { "usr\\lib\\\\\\", "lib" }, + { "C:/usr", "usr" }, + { "C:/usr", "usr" }, + { "C:/usr/", "usr" }, + { "C:/usr//", "usr" }, + { "C:/usr/lib", "lib" }, + { "C:usr/lib", "lib" }, + { "C:usr/lib///", "lib" }, + { "C:", "." }, + { "C:a", "a" }, + { "C:/", "/" }, + { "C:///", "/" }, + { "\\", "\\", "/" }, + { "\\\\", "\\", "/" }, + { "\\\\\\", "\\", "/" }, +#endif + { NULL, NULL } +}; + +static struct test_data dirname_data[] = { + /* --- POSIX type paths --- */ + { NULL, "." }, + { "", "." }, + { ".", "." }, + { "..", "." }, + { "/", "/" }, + { "//", "/", "//" }, + { "///", "/", "//" }, + { "////", "/", "//" }, + { "usr", "." }, + { "/usr", "/" }, + { "/usr/", "/" }, + { "/usr//", "/" }, + { "/usr/lib", "/usr" }, + { "usr/lib", "usr" }, + { "usr/lib///", "usr" }, + +#if defined(__MINGW32__) || defined(_MSC_VER) + /* --- win32 type paths --- */ + { "\\", "\\" }, + { "\\\\", "\\\\" }, + { "\\usr", "\\" }, + { "\\usr\\", "\\" }, + { "\\usr\\\\", "\\" }, + { "\\usr\\lib", "\\usr" }, + { "usr\\lib", "usr" }, + { "usr\\lib\\\\\\", "usr" }, + { "C:a", "C:." }, + { "C:/", "C:/" }, + { "C:///", "C:/" }, + { "C:/usr", "C:/" }, + { "C:/usr/", "C:/" }, + { "C:/usr//", "C:/" }, + { "C:/usr/lib", "C:/usr" }, + { "C:usr/lib", "C:usr" }, + { "C:usr/lib///", "C:usr" }, + { "\\\\\\", "\\" }, + { "\\\\\\\\", "\\" }, + { "C:", "C:.", "." }, +#endif + { NULL, NULL } +}; + +int cmd_main(int argc, const char **argv) +{ + if (argc == 3 && !strcmp(argv[1], "normalize_path_copy")) { + char *buf = xmallocz(strlen(argv[2])); + int rv = normalize_path_copy(buf, argv[2]); + if (rv) + buf = "++failed++"; + puts(buf); + return 0; + } + + if (argc >= 2 && !strcmp(argv[1], "real_path")) { + while (argc > 2) { + puts(real_path(argv[2])); + argc--; + argv++; + } + return 0; + } + + if (argc >= 2 && !strcmp(argv[1], "absolute_path")) { + while (argc > 2) { + puts(absolute_path(argv[2])); + argc--; + argv++; + } + return 0; + } + + if (argc == 4 && !strcmp(argv[1], "longest_ancestor_length")) { + int len; + struct string_list ceiling_dirs = STRING_LIST_INIT_DUP; + char *path = xstrdup(argv[2]); + + /* + * We have to normalize the arguments because under + * Windows, bash mangles arguments that look like + * absolute POSIX paths or colon-separate lists of + * absolute POSIX paths into DOS paths (e.g., + * "/foo:/foo/bar" might be converted to + * "D:\Src\msysgit\foo;D:\Src\msysgit\foo\bar"), + * whereas longest_ancestor_length() requires paths + * that use forward slashes. + */ + if (normalize_path_copy(path, path)) + die("Path \"%s\" could not be normalized", argv[2]); + string_list_split(&ceiling_dirs, argv[3], PATH_SEP, -1); + filter_string_list(&ceiling_dirs, 0, + normalize_ceiling_entry, NULL); + len = longest_ancestor_length(path, &ceiling_dirs); + string_list_clear(&ceiling_dirs, 0); + free(path); + printf("%d\n", len); + return 0; + } + + if (argc >= 4 && !strcmp(argv[1], "prefix_path")) { + const char *prefix = argv[2]; + int prefix_len = strlen(prefix); + int nongit_ok; + setup_git_directory_gently(&nongit_ok); + while (argc > 3) { + puts(prefix_path(prefix, prefix_len, argv[3])); + argc--; + argv++; + } + return 0; + } + + if (argc == 4 && !strcmp(argv[1], "strip_path_suffix")) { + char *prefix = strip_path_suffix(argv[2], argv[3]); + printf("%s\n", prefix ? prefix : "(null)"); + return 0; + } + + if (argc == 3 && !strcmp(argv[1], "print_path")) { + puts(argv[2]); + return 0; + } + + if (argc == 4 && !strcmp(argv[1], "relative_path")) { + struct strbuf sb = STRBUF_INIT; + const char *in, *prefix, *rel; + normalize_argv_string(&in, argv[2]); + normalize_argv_string(&prefix, argv[3]); + rel = relative_path(in, prefix, &sb); + if (!rel) + puts("(null)"); + else + puts(strlen(rel) > 0 ? rel : "(empty)"); + strbuf_release(&sb); + return 0; + } + + if (argc == 2 && !strcmp(argv[1], "basename")) + return test_function(basename_data, basename, argv[1]); + + if (argc == 2 && !strcmp(argv[1], "dirname")) + return test_function(dirname_data, dirname, argv[1]); + + fprintf(stderr, "%s: unknown function name: %s\n", argv[0], + argv[1] ? argv[1] : "(there was none)"); + return 1; +} diff --git a/t/helper/test-prio-queue.c b/t/helper/test-prio-queue.c new file mode 100644 index 0000000000..ae58fff359 --- /dev/null +++ b/t/helper/test-prio-queue.c @@ -0,0 +1,39 @@ +#include "cache.h" +#include "prio-queue.h" + +static int intcmp(const void *va, const void *vb, void *data) +{ + const int *a = va, *b = vb; + return *a - *b; +} + +static void show(int *v) +{ + if (!v) + printf("NULL\n"); + else + printf("%d\n", *v); + free(v); +} + +int cmd_main(int argc, const char **argv) +{ + struct prio_queue pq = { intcmp }; + + while (*++argv) { + if (!strcmp(*argv, "get")) + show(prio_queue_get(&pq)); + else if (!strcmp(*argv, "dump")) { + int *v; + while ((v = prio_queue_get(&pq))) + show(v); + } + else { + int *v = malloc(sizeof(*v)); + *v = atoi(*argv); + prio_queue_put(&pq, v); + } + } + + return 0; +} diff --git a/t/helper/test-read-cache.c b/t/helper/test-read-cache.c new file mode 100644 index 0000000000..2a7990efc3 --- /dev/null +++ b/t/helper/test-read-cache.c @@ -0,0 +1,13 @@ +#include "cache.h" + +int cmd_main(int argc, const char **argv) +{ + int i, cnt = 1; + if (argc == 2) + cnt = strtol(argv[1], NULL, 0); + for (i = 0; i < cnt; i++) { + read_cache(); + discard_cache(); + } + return 0; +} diff --git a/t/helper/test-regex.c b/t/helper/test-regex.c new file mode 100644 index 0000000000..b5ea8a97c5 --- /dev/null +++ b/t/helper/test-regex.c @@ -0,0 +1,75 @@ +#include "git-compat-util.h" +#include "gettext.h" + +struct reg_flag { + const char *name; + int flag; +}; + +static struct reg_flag reg_flags[] = { + { "EXTENDED", REG_EXTENDED }, + { "NEWLINE", REG_NEWLINE }, + { "ICASE", REG_ICASE }, + { "NOTBOL", REG_NOTBOL }, +#ifdef REG_STARTEND + { "STARTEND", REG_STARTEND }, +#endif + { NULL, 0 } +}; + +static int test_regex_bug(void) +{ + char *pat = "[^={} \t]+"; + char *str = "={}\nfred"; + regex_t r; + regmatch_t m[1]; + + if (regcomp(&r, pat, REG_EXTENDED | REG_NEWLINE)) + die("failed regcomp() for pattern '%s'", pat); + if (regexec(&r, str, 1, m, 0)) + die("no match of pattern '%s' to string '%s'", pat, str); + + /* http://sourceware.org/bugzilla/show_bug.cgi?id=3957 */ + if (m[0].rm_so == 3) /* matches '\n' when it should not */ + die("regex bug confirmed: re-build git with NO_REGEX=1"); + + return 0; +} + +int cmd_main(int argc, const char **argv) +{ + const char *pat; + const char *str; + int flags = 0; + regex_t r; + regmatch_t m[1]; + + if (argc == 2 && !strcmp(argv[1], "--bug")) + return test_regex_bug(); + else if (argc < 3) + usage("test-regex --bug\n" + "test-regex <pattern> <string> [<options>]"); + + argv++; + pat = *argv++; + str = *argv++; + while (*argv) { + struct reg_flag *rf; + for (rf = reg_flags; rf->name; rf++) + if (!strcmp(*argv, rf->name)) { + flags |= rf->flag; + break; + } + if (!rf->name) + die("do not recognize %s", *argv); + argv++; + } + git_setup_gettext(); + + if (regcomp(&r, pat, flags)) + die("failed regcomp() for pattern '%s'", pat); + if (regexec(&r, str, 1, m, 0)) + return 1; + + return 0; +} diff --git a/t/helper/test-revision-walking.c b/t/helper/test-revision-walking.c new file mode 100644 index 0000000000..b8e6fe1d00 --- /dev/null +++ b/t/helper/test-revision-walking.c @@ -0,0 +1,68 @@ +/* + * test-revision-walking.c: test revision walking API. + * + * (C) 2012 Heiko Voigt <hvoigt@hvoigt.net> + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "cache.h" +#include "commit.h" +#include "diff.h" +#include "revision.h" + +static void print_commit(struct commit *commit) +{ + struct strbuf sb = STRBUF_INIT; + struct pretty_print_context ctx = {0}; + ctx.date_mode.type = DATE_NORMAL; + format_commit_message(commit, " %m %s", &sb, &ctx); + printf("%s\n", sb.buf); + strbuf_release(&sb); +} + +static int run_revision_walk(void) +{ + struct rev_info rev; + struct commit *commit; + const char *argv[] = {NULL, "--all", NULL}; + int argc = ARRAY_SIZE(argv) - 1; + int got_revision = 0; + + init_revisions(&rev, NULL); + setup_revisions(argc, argv, &rev, NULL); + if (prepare_revision_walk(&rev)) + die("revision walk setup failed"); + + while ((commit = get_revision(&rev)) != NULL) { + print_commit(commit); + got_revision = 1; + } + + reset_revision_walk(); + return got_revision; +} + +int cmd_main(int argc, const char **argv) +{ + if (argc < 2) + return 1; + + setup_git_directory(); + + if (!strcmp(argv[1], "run-twice")) { + printf("1st\n"); + if (!run_revision_walk()) + return 1; + printf("2nd\n"); + if (!run_revision_walk()) + return 1; + + return 0; + } + + fprintf(stderr, "check usage\n"); + return 1; +} diff --git a/t/helper/test-run-command.c b/t/helper/test-run-command.c new file mode 100644 index 0000000000..d24d157379 --- /dev/null +++ b/t/helper/test-run-command.c @@ -0,0 +1,87 @@ +/* + * test-run-command.c: test run command API. + * + * (C) 2009 Ilari Liusvaara <ilari.liusvaara@elisanet.fi> + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "git-compat-util.h" +#include "run-command.h" +#include "argv-array.h" +#include "strbuf.h" +#include <string.h> +#include <errno.h> + +static int number_callbacks; +static int parallel_next(struct child_process *cp, + struct strbuf *err, + void *cb, + void **task_cb) +{ + struct child_process *d = cb; + if (number_callbacks >= 4) + return 0; + + argv_array_pushv(&cp->args, d->argv); + strbuf_addstr(err, "preloaded output of a child\n"); + number_callbacks++; + return 1; +} + +static int no_job(struct child_process *cp, + struct strbuf *err, + void *cb, + void **task_cb) +{ + strbuf_addstr(err, "no further jobs available\n"); + return 0; +} + +static int task_finished(int result, + struct strbuf *err, + void *pp_cb, + void *pp_task_cb) +{ + strbuf_addstr(err, "asking for a quick stop\n"); + return 1; +} + +int cmd_main(int argc, const char **argv) +{ + struct child_process proc = CHILD_PROCESS_INIT; + int jobs; + + if (argc < 3) + return 1; + proc.argv = (const char **)argv + 2; + + if (!strcmp(argv[1], "start-command-ENOENT")) { + if (start_command(&proc) < 0 && errno == ENOENT) + return 0; + fprintf(stderr, "FAIL %s\n", argv[1]); + return 1; + } + if (!strcmp(argv[1], "run-command")) + exit(run_command(&proc)); + + jobs = atoi(argv[2]); + proc.argv = (const char **)argv + 3; + + if (!strcmp(argv[1], "run-command-parallel")) + exit(run_processes_parallel(jobs, parallel_next, + NULL, NULL, &proc)); + + if (!strcmp(argv[1], "run-command-abort")) + exit(run_processes_parallel(jobs, parallel_next, + NULL, task_finished, &proc)); + + if (!strcmp(argv[1], "run-command-no-jobs")) + exit(run_processes_parallel(jobs, no_job, + NULL, task_finished, &proc)); + + fprintf(stderr, "check usage\n"); + return 1; +} diff --git a/t/helper/test-scrap-cache-tree.c b/t/helper/test-scrap-cache-tree.c new file mode 100644 index 0000000000..d2a63bea43 --- /dev/null +++ b/t/helper/test-scrap-cache-tree.c @@ -0,0 +1,18 @@ +#include "cache.h" +#include "lockfile.h" +#include "tree.h" +#include "cache-tree.h" + +static struct lock_file index_lock; + +int cmd_main(int ac, const char **av) +{ + setup_git_directory(); + hold_locked_index(&index_lock, LOCK_DIE_ON_ERROR); + if (read_cache() < 0) + die("unable to read index file"); + active_cache_tree = NULL; + if (write_locked_index(&the_index, &index_lock, COMMIT_LOCK)) + die("unable to write index file"); + return 0; +} diff --git a/t/helper/test-sha1-array.c b/t/helper/test-sha1-array.c new file mode 100644 index 0000000000..f7a53c4ad6 --- /dev/null +++ b/t/helper/test-sha1-array.c @@ -0,0 +1,35 @@ +#include "cache.h" +#include "sha1-array.h" + +static int print_sha1(const unsigned char sha1[20], void *data) +{ + puts(sha1_to_hex(sha1)); + return 0; +} + +int cmd_main(int argc, const char **argv) +{ + struct sha1_array array = SHA1_ARRAY_INIT; + struct strbuf line = STRBUF_INIT; + + while (strbuf_getline(&line, stdin) != EOF) { + const char *arg; + unsigned char sha1[20]; + + if (skip_prefix(line.buf, "append ", &arg)) { + if (get_sha1_hex(arg, sha1)) + die("not a hexadecimal SHA1: %s", arg); + sha1_array_append(&array, sha1); + } else if (skip_prefix(line.buf, "lookup ", &arg)) { + if (get_sha1_hex(arg, sha1)) + die("not a hexadecimal SHA1: %s", arg); + printf("%d\n", sha1_array_lookup(&array, sha1)); + } else if (!strcmp(line.buf, "clear")) + sha1_array_clear(&array); + else if (!strcmp(line.buf, "for_each_unique")) + sha1_array_for_each_unique(&array, print_sha1, NULL); + else + die("unknown command: %s", line.buf); + } + return 0; +} diff --git a/t/helper/test-sha1.c b/t/helper/test-sha1.c new file mode 100644 index 0000000000..a1c13f54ec --- /dev/null +++ b/t/helper/test-sha1.c @@ -0,0 +1,56 @@ +#include "cache.h" + +int cmd_main(int ac, const char **av) +{ + git_SHA_CTX ctx; + unsigned char sha1[20]; + unsigned bufsz = 8192; + int binary = 0; + char *buffer; + + if (ac == 2) { + if (!strcmp(av[1], "-b")) + binary = 1; + else + bufsz = strtoul(av[1], NULL, 10) * 1024 * 1024; + } + + if (!bufsz) + bufsz = 8192; + + while ((buffer = malloc(bufsz)) == NULL) { + fprintf(stderr, "bufsz %u is too big, halving...\n", bufsz); + bufsz /= 2; + if (bufsz < 1024) + die("OOPS"); + } + + git_SHA1_Init(&ctx); + + while (1) { + ssize_t sz, this_sz; + char *cp = buffer; + unsigned room = bufsz; + this_sz = 0; + while (room) { + sz = xread(0, cp, room); + if (sz == 0) + break; + if (sz < 0) + die_errno("test-sha1"); + this_sz += sz; + cp += sz; + room -= sz; + } + if (this_sz == 0) + break; + git_SHA1_Update(&ctx, buffer, this_sz); + } + git_SHA1_Final(sha1, &ctx); + + if (binary) + fwrite(sha1, 1, 20, stdout); + else + puts(sha1_to_hex(sha1)); + exit(0); +} diff --git a/t/helper/test-sha1.sh b/t/helper/test-sha1.sh new file mode 100755 index 0000000000..750b95a0a1 --- /dev/null +++ b/t/helper/test-sha1.sh @@ -0,0 +1,83 @@ +#!/bin/sh + +dd if=/dev/zero bs=1048576 count=100 2>/dev/null | +/usr/bin/time t/helper/test-sha1 >/dev/null + +while read expect cnt pfx +do + case "$expect" in '#'*) continue ;; esac + actual=$( + { + test -z "$pfx" || echo "$pfx" + dd if=/dev/zero bs=1048576 count=$cnt 2>/dev/null | + perl -pe 'y/\000/g/' + } | ./t/helper/test-sha1 $cnt + ) + if test "$expect" = "$actual" + then + echo "OK: $expect $cnt $pfx" + else + echo >&2 "OOPS: $cnt" + echo >&2 "expect: $expect" + echo >&2 "actual: $actual" + exit 1 + fi +done <<EOF +da39a3ee5e6b4b0d3255bfef95601890afd80709 0 +3f786850e387550fdab836ed7e6dc881de23001b 0 a +5277cbb45a15902137d332d97e89cf8136545485 0 ab +03cfd743661f07975fa2f1220c5194cbaff48451 0 abc +3330b4373640f9e4604991e73c7e86bfd8da2dc3 0 abcd +ec11312386ad561674f724b8cca7cf1796e26d1d 0 abcde +bdc37c074ec4ee6050d68bc133c6b912f36474df 0 abcdef +69bca99b923859f2dc486b55b87f49689b7358c7 0 abcdefg +e414af7161c9554089f4106d6f1797ef14a73666 0 abcdefgh +0707f2970043f9f7c22029482db27733deaec029 0 abcdefghi +a4dd8aa74a5636728fe52451636e2e17726033aa 1 +9986b45e2f4d7086372533bb6953a8652fa3644a 1 frotz +23d8d4f788e8526b4877548a32577543cbaaf51f 10 +8cd23f822ab44c7f481b8c92d591f6d1fcad431c 10 frotz +f3b5604a4e604899c1233edb3bf1cc0ede4d8c32 512 +b095bd837a371593048136e429e9ac4b476e1bb3 512 frotz +08fa81d6190948de5ccca3966340cc48c10cceac 1200 xyzzy +e33a291f42c30a159733dd98b8b3e4ff34158ca0 4090 4G +#a3bf783bc20caa958f6cb24dd140a7b21984838d 9999 nitfol +EOF + +exit + +# generating test vectors +# inputs are number of megabytes followed by some random string to prefix. + +while read cnt pfx +do + actual=$( + { + test -z "$pfx" || echo "$pfx" + dd if=/dev/zero bs=1048576 count=$cnt 2>/dev/null | + perl -pe 'y/\000/g/' + } | sha1sum | + sed -e 's/ .*//' + ) + echo "$actual $cnt $pfx" +done <<EOF +0 +0 a +0 ab +0 abc +0 abcd +0 abcde +0 abcdef +0 abcdefg +0 abcdefgh +0 abcdefghi +1 +1 frotz +10 +10 frotz +512 +512 frotz +1200 xyzzy +4090 4G +9999 nitfol +EOF diff --git a/t/helper/test-sigchain.c b/t/helper/test-sigchain.c new file mode 100644 index 0000000000..b71edbd442 --- /dev/null +++ b/t/helper/test-sigchain.c @@ -0,0 +1,22 @@ +#include "cache.h" +#include "sigchain.h" + +#define X(f) \ +static void f(int sig) { \ + puts(#f); \ + fflush(stdout); \ + sigchain_pop(sig); \ + raise(sig); \ +} +X(one) +X(two) +X(three) +#undef X + +int cmd_main(int argc, const char **argv) { + sigchain_push(SIGTERM, one); + sigchain_push(SIGTERM, two); + sigchain_push(SIGTERM, three); + raise(SIGTERM); + return 0; +} diff --git a/t/helper/test-string-list.c b/t/helper/test-string-list.c new file mode 100644 index 0000000000..4a68967bd1 --- /dev/null +++ b/t/helper/test-string-list.c @@ -0,0 +1,103 @@ +#include "cache.h" +#include "string-list.h" + +/* + * Parse an argument into a string list. arg should either be a + * ':'-separated list of strings, or "-" to indicate an empty string + * list (as opposed to "", which indicates a string list containing a + * single empty string). list->strdup_strings must be set. + */ +static void parse_string_list(struct string_list *list, const char *arg) +{ + if (!strcmp(arg, "-")) + return; + + (void)string_list_split(list, arg, ':', -1); +} + +static void write_list(const struct string_list *list) +{ + int i; + for (i = 0; i < list->nr; i++) + printf("[%d]: \"%s\"\n", i, list->items[i].string); +} + +static void write_list_compact(const struct string_list *list) +{ + int i; + if (!list->nr) + printf("-\n"); + else { + printf("%s", list->items[0].string); + for (i = 1; i < list->nr; i++) + printf(":%s", list->items[i].string); + printf("\n"); + } +} + +static int prefix_cb(struct string_list_item *item, void *cb_data) +{ + const char *prefix = (const char *)cb_data; + return starts_with(item->string, prefix); +} + +int cmd_main(int argc, const char **argv) +{ + if (argc == 5 && !strcmp(argv[1], "split")) { + struct string_list list = STRING_LIST_INIT_DUP; + int i; + const char *s = argv[2]; + int delim = *argv[3]; + int maxsplit = atoi(argv[4]); + + i = string_list_split(&list, s, delim, maxsplit); + printf("%d\n", i); + write_list(&list); + string_list_clear(&list, 0); + return 0; + } + + if (argc == 5 && !strcmp(argv[1], "split_in_place")) { + struct string_list list = STRING_LIST_INIT_NODUP; + int i; + char *s = xstrdup(argv[2]); + int delim = *argv[3]; + int maxsplit = atoi(argv[4]); + + i = string_list_split_in_place(&list, s, delim, maxsplit); + printf("%d\n", i); + write_list(&list); + string_list_clear(&list, 0); + free(s); + return 0; + } + + if (argc == 4 && !strcmp(argv[1], "filter")) { + /* + * Retain only the items that have the specified prefix. + * Arguments: list|- prefix + */ + struct string_list list = STRING_LIST_INIT_DUP; + const char *prefix = argv[3]; + + parse_string_list(&list, argv[2]); + filter_string_list(&list, 0, prefix_cb, (void *)prefix); + write_list_compact(&list); + string_list_clear(&list, 0); + return 0; + } + + if (argc == 3 && !strcmp(argv[1], "remove_duplicates")) { + struct string_list list = STRING_LIST_INIT_DUP; + + parse_string_list(&list, argv[2]); + string_list_remove_duplicates(&list, 0); + write_list_compact(&list); + string_list_clear(&list, 0); + return 0; + } + + fprintf(stderr, "%s: unknown function name: %s\n", argv[0], + argv[1] ? argv[1] : "(there was none)"); + return 1; +} diff --git a/t/helper/test-submodule-config.c b/t/helper/test-submodule-config.c new file mode 100644 index 0000000000..2f144d539a --- /dev/null +++ b/t/helper/test-submodule-config.c @@ -0,0 +1,76 @@ +#include "cache.h" +#include "submodule-config.h" +#include "submodule.h" + +static void die_usage(int argc, const char **argv, const char *msg) +{ + fprintf(stderr, "%s\n", msg); + fprintf(stderr, "Usage: %s [<commit> <submodulepath>] ...\n", argv[0]); + exit(1); +} + +static int git_test_config(const char *var, const char *value, void *cb) +{ + return parse_submodule_config_option(var, value); +} + +int cmd_main(int argc, const char **argv) +{ + const char **arg = argv; + int my_argc = argc; + int output_url = 0; + int lookup_name = 0; + + arg++; + my_argc--; + while (arg[0] && starts_with(arg[0], "--")) { + if (!strcmp(arg[0], "--url")) + output_url = 1; + if (!strcmp(arg[0], "--name")) + lookup_name = 1; + arg++; + my_argc--; + } + + if (my_argc % 2 != 0) + die_usage(argc, argv, "Wrong number of arguments."); + + setup_git_directory(); + gitmodules_config(); + git_config(git_test_config, NULL); + + while (*arg) { + unsigned char commit_sha1[20]; + const struct submodule *submodule; + const char *commit; + const char *path_or_name; + + commit = arg[0]; + path_or_name = arg[1]; + + if (commit[0] == '\0') + hashclr(commit_sha1); + else if (get_sha1(commit, commit_sha1) < 0) + die_usage(argc, argv, "Commit not found."); + + if (lookup_name) { + submodule = submodule_from_name(commit_sha1, path_or_name); + } else + submodule = submodule_from_path(commit_sha1, path_or_name); + if (!submodule) + die_usage(argc, argv, "Submodule not found."); + + if (output_url) + printf("Submodule url: '%s' for path '%s'\n", + submodule->url, submodule->path); + else + printf("Submodule name: '%s' for path '%s'\n", + submodule->name, submodule->path); + + arg += 2; + } + + submodule_free(); + + return 0; +} diff --git a/t/helper/test-subprocess.c b/t/helper/test-subprocess.c new file mode 100644 index 0000000000..30c5765bfc --- /dev/null +++ b/t/helper/test-subprocess.c @@ -0,0 +1,19 @@ +#include "cache.h" +#include "run-command.h" + +int cmd_main(int argc, const char **argv) +{ + struct child_process cp = CHILD_PROCESS_INIT; + int nogit = 0; + + setup_git_directory_gently(&nogit); + if (nogit) + die("No git repo found"); + if (argc > 1 && !strcmp(argv[1], "--setup-work-tree")) { + setup_work_tree(); + argv++; + } + cp.git_cmd = 1; + cp.argv = (const char **)argv + 1; + return run_command(&cp); +} diff --git a/t/helper/test-svn-fe.c b/t/helper/test-svn-fe.c new file mode 100644 index 0000000000..7667c0803f --- /dev/null +++ b/t/helper/test-svn-fe.c @@ -0,0 +1,52 @@ +/* + * test-svn-fe: Code to exercise the svn import lib + */ + +#include "git-compat-util.h" +#include "vcs-svn/svndump.h" +#include "vcs-svn/svndiff.h" +#include "vcs-svn/sliding_window.h" +#include "vcs-svn/line_buffer.h" + +static const char test_svnfe_usage[] = + "test-svn-fe (<dumpfile> | [-d] <preimage> <delta> <len>)"; + +static int apply_delta(int argc, const char **argv) +{ + struct line_buffer preimage = LINE_BUFFER_INIT; + struct line_buffer delta = LINE_BUFFER_INIT; + struct sliding_view preimage_view = SLIDING_VIEW_INIT(&preimage, -1); + + if (argc != 5) + usage(test_svnfe_usage); + + if (buffer_init(&preimage, argv[2])) + die_errno("cannot open preimage"); + if (buffer_init(&delta, argv[3])) + die_errno("cannot open delta"); + if (svndiff0_apply(&delta, (off_t) strtoumax(argv[4], NULL, 0), + &preimage_view, stdout)) + return 1; + if (buffer_deinit(&preimage)) + die_errno("cannot close preimage"); + if (buffer_deinit(&delta)) + die_errno("cannot close delta"); + strbuf_release(&preimage_view.buf); + return 0; +} + +int cmd_main(int argc, const char **argv) +{ + if (argc == 2) { + if (svndump_init(argv[1])) + return 1; + svndump_read(NULL, "refs/heads/master", "refs/notes/svn/revs"); + svndump_deinit(); + svndump_reset(); + return 0; + } + + if (argc >= 2 && !strcmp(argv[1], "-d")) + return apply_delta(argc, argv); + usage(test_svnfe_usage); +} diff --git a/t/helper/test-urlmatch-normalization.c b/t/helper/test-urlmatch-normalization.c new file mode 100644 index 0000000000..49b6e836be --- /dev/null +++ b/t/helper/test-urlmatch-normalization.c @@ -0,0 +1,50 @@ +#include "git-compat-util.h" +#include "urlmatch.h" + +int cmd_main(int argc, const char **argv) +{ + const char usage[] = "test-urlmatch-normalization [-p | -l] <url1> | <url1> <url2>"; + char *url1, *url2; + int opt_p = 0, opt_l = 0; + + /* + * For one url, succeed if url_normalize succeeds on it, fail otherwise. + * For two urls, succeed only if url_normalize succeeds on both and + * the results compare equal with strcmp. If -p is given (one url only) + * and url_normalize succeeds, print the result followed by "\n". If + * -l is given (one url only) and url_normalize succeeds, print the + * returned length in decimal followed by "\n". + */ + + if (argc > 1 && !strcmp(argv[1], "-p")) { + opt_p = 1; + argc--; + argv++; + } else if (argc > 1 && !strcmp(argv[1], "-l")) { + opt_l = 1; + argc--; + argv++; + } + + if (argc < 2 || argc > 3) + die("%s", usage); + + if (argc == 2) { + struct url_info info; + url1 = url_normalize(argv[1], &info); + if (!url1) + return 1; + if (opt_p) + printf("%s\n", url1); + if (opt_l) + printf("%u\n", (unsigned)info.url_len); + return 0; + } + + if (opt_p || opt_l) + die("%s", usage); + + url1 = url_normalize(argv[1], NULL); + url2 = url_normalize(argv[2], NULL); + return (url1 && url2 && !strcmp(url1, url2)) ? 0 : 1; +} diff --git a/t/helper/test-wildmatch.c b/t/helper/test-wildmatch.c new file mode 100644 index 0000000000..52be876fed --- /dev/null +++ b/t/helper/test-wildmatch.c @@ -0,0 +1,21 @@ +#include "cache.h" + +int cmd_main(int argc, const char **argv) +{ + int i; + for (i = 2; i < argc; i++) { + if (argv[i][0] == '/') + die("Forward slash is not allowed at the beginning of the\n" + "pattern because Windows does not like it. Use `XXX/' instead."); + else if (!strncmp(argv[i], "XXX/", 4)) + argv[i] += 3; + } + if (!strcmp(argv[1], "wildmatch")) + return !!wildmatch(argv[3], argv[2], WM_PATHNAME, NULL); + else if (!strcmp(argv[1], "iwildmatch")) + return !!wildmatch(argv[3], argv[2], WM_PATHNAME | WM_CASEFOLD, NULL); + else if (!strcmp(argv[1], "pathmatch")) + return !!wildmatch(argv[3], argv[2], 0, NULL); + else + return 1; +} diff --git a/t/lib-git-daemon.sh b/t/lib-git-daemon.sh index bc4b3412fb..f9cbd47931 100644 --- a/t/lib-git-daemon.sh +++ b/t/lib-git-daemon.sh @@ -23,6 +23,11 @@ then test_done fi +if test_have_prereq !PIPE +then + test_skip_or_die $GIT_TEST_GIT_DAEMON "file system does not support FIFOs" +fi + LIB_GIT_DAEMON_PORT=${LIB_GIT_DAEMON_PORT-${this_test#t}} GIT_DAEMON_PID= @@ -77,8 +82,7 @@ stop_git_daemon() { kill "$GIT_DAEMON_PID" wait "$GIT_DAEMON_PID" >&3 2>&4 ret=$? - # expect exit with status 143 = 128+15 for signal TERM=15 - if test $ret -ne 143 + if test_match_signal 15 $? then error "git daemon exited with status: $ret" fi diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh index 75482254a3..54fd5a6ca0 100644 --- a/t/lib-git-p4.sh +++ b/t/lib-git-p4.sh @@ -6,6 +6,14 @@ # a subdirectory called "$git" TEST_NO_CREATE_REPO=NoThanks +# Some operations require multiple attempts to be successful. Define +# here the maximal retry timeout in seconds. +RETRY_TIMEOUT=60 + +# Sometimes p4d seems to hang. Terminate the p4d process automatically after +# the defined timeout in seconds. +P4D_TIMEOUT=300 + . ./test-lib.sh if ! test_have_prereq PYTHON @@ -25,7 +33,7 @@ fi # Older versions of perforce were available compiled natively for # cygwin. Those do not accept native windows paths, so make sure # not to convert for them. -native_path() { +native_path () { path="$1" && if test_have_prereq CYGWIN && ! p4 -V | grep -q CYGWIN then @@ -36,6 +44,15 @@ native_path() { echo "$path" } +# On Solaris the 'date +%s' function is not supported and therefore we +# need this replacement. +# Attention: This function is not safe again against time offset updates +# at runtime (e.g. via NTP). The 'clock_gettime(CLOCK_MONOTONIC)' +# function could fix that but it is not in Python until 3.3. +time_in_seconds () { + (cd / && "$PYTHON_PATH" -c 'import time; print(int(time.time()))') +} + # Try to pick a unique port: guess a large number, then hope # no more than one of each test is running. # @@ -57,13 +74,22 @@ cli="$TRASH_DIRECTORY/cli" git="$TRASH_DIRECTORY/git" pidfile="$TRASH_DIRECTORY/p4d.pid" +# Sometimes "prove" seems to hang on exit because p4d is still running +cleanup () { + if test -f "$pidfile" + then + kill -9 $(cat "$pidfile") 2>/dev/null && exit 255 + fi +} +trap cleanup EXIT + # git p4 submit generates a temp file, which will # not get cleaned up if the submission fails. Don't # clutter up /tmp on the test machine. TMPDIR="$TRASH_DIRECTORY" export TMPDIR -start_p4d() { +start_p4d () { mkdir -p "$db" "$cli" "$git" && rm -f "$pidfile" && ( @@ -81,6 +107,19 @@ start_p4d() { # will be caught with the "kill -0" check below. i=${P4D_START_PATIENCE:-300} pid=$(cat "$pidfile") + + timeout=$(($(time_in_seconds) + $P4D_TIMEOUT)) + while true + do + if test $(time_in_seconds) -gt $timeout + then + kill -9 $pid + exit 1 + fi + sleep 1 + done & + watchdog_pid=$! + ready= while test $i -gt 0 do @@ -112,7 +151,7 @@ start_p4d() { return 0 } -p4_add_user() { +p4_add_user () { name=$1 && p4 user -f -i <<-EOF User: $name @@ -121,33 +160,57 @@ p4_add_user() { EOF } -kill_p4d() { - pid=$(cat "$pidfile") - # it had better exist for the first kill - kill $pid && - for i in 1 2 3 4 5 ; do - kill $pid >/dev/null 2>&1 || break +p4_add_job () { + p4 job -f -i <<-EOF + Job: $1 + Status: open + User: dummy + Description: + EOF +} + +retry_until_success () { + timeout=$(($(time_in_seconds) + $RETRY_TIMEOUT)) + until "$@" 2>/dev/null || test $(time_in_seconds) -gt $timeout + do + sleep 1 + done +} + +retry_until_fail () { + timeout=$(($(time_in_seconds) + $RETRY_TIMEOUT)) + until ! "$@" 2>/dev/null || test $(time_in_seconds) -gt $timeout + do sleep 1 - done && + done +} + +kill_p4d () { + pid=$(cat "$pidfile") + retry_until_fail kill $pid + retry_until_fail kill -9 $pid # complain if it would not die test_must_fail kill $pid >/dev/null 2>&1 && - rm -rf "$db" "$cli" "$pidfile" + rm -rf "$db" "$cli" "$pidfile" && + retry_until_fail kill -9 $watchdog_pid } -cleanup_git() { - rm -rf "$git" && - mkdir "$git" +cleanup_git () { + retry_until_success rm -r "$git" + test_must_fail test -d "$git" && + retry_until_success mkdir "$git" } -marshal_dump() { +marshal_dump () { what=$1 && line=${2:-1} && cat >"$TRASH_DIRECTORY/marshal-dump.py" <<-EOF && import marshal import sys + instream = getattr(sys.stdin, 'buffer', sys.stdin) for i in range($line): - d = marshal.load(sys.stdin) - print d['$what'] + d = marshal.load(instream) + print(d[b'$what'].decode('utf-8')) EOF "$PYTHON_PATH" "$TRASH_DIRECTORY/marshal-dump.py" } @@ -155,7 +218,7 @@ marshal_dump() { # # Construct a client with this list of View lines # -client_view() { +client_view () { ( cat <<-EOF && Client: $P4CLIENT @@ -169,7 +232,7 @@ client_view() { ) | p4 client -i } -is_cli_file_writeable() { +is_cli_file_writeable () { # cygwin version of p4 does not set read-only attr, # will be marked 444 but -w is true file="$1" && diff --git a/t/lib-git-svn.sh b/t/lib-git-svn.sh index b0ec12ff6c..688313ed5c 100644 --- a/t/lib-git-svn.sh +++ b/t/lib-git-svn.sh @@ -1,8 +1,5 @@ . ./test-lib.sh -remotes_git_svn=remotes/git""-svn -git_svn_id=git""-svn-id - if test -n "$NO_SVN_TESTS" then skip_all='skipping git svn tests, NO_SVN_TESTS defined' @@ -68,81 +65,22 @@ svn_cmd () { svn "$orig_svncmd" --config-dir "$svnconf" "$@" } -prepare_httpd () { - for d in \ - "$SVN_HTTPD_PATH" \ - /usr/sbin/apache2 \ - /usr/sbin/httpd \ - ; do - if test -f "$d" - then - SVN_HTTPD_PATH="$d" - break - fi - done - if test -z "$SVN_HTTPD_PATH" - then - echo >&2 '*** error: Apache not found' - return 1 - fi - for d in \ - "$SVN_HTTPD_MODULE_PATH" \ - /usr/lib/apache2/modules \ - /usr/libexec/apache2 \ - ; do - if test -d "$d" - then - SVN_HTTPD_MODULE_PATH="$d" - break - fi - done - if test -z "$SVN_HTTPD_MODULE_PATH" - then - echo >&2 '*** error: Apache module dir not found' - return 1 - fi - if test ! -f "$SVN_HTTPD_MODULE_PATH/mod_dav_svn.so" - then - echo >&2 '*** error: Apache module "mod_dav_svn" not found' - return 1 - fi - - repo_base_path="${1-svn}" - mkdir "$GIT_DIR"/logs - - cat > "$GIT_DIR/httpd.conf" <<EOF -ServerName "git svn test" -ServerRoot "$GIT_DIR" -DocumentRoot "$GIT_DIR" -PidFile "$GIT_DIR/httpd.pid" -LockFile logs/accept.lock -Listen 127.0.0.1:$SVN_HTTPD_PORT -LoadModule dav_module $SVN_HTTPD_MODULE_PATH/mod_dav.so -LoadModule dav_svn_module $SVN_HTTPD_MODULE_PATH/mod_dav_svn.so -<Location /$repo_base_path> - DAV svn - SVNPath "$rawsvnrepo" -</Location> -EOF -} - -start_httpd () { - if test -z "$SVN_HTTPD_PORT" - then - echo >&2 'SVN_HTTPD_PORT is not defined!' - return - fi - - prepare_httpd "$1" || return 1 - - "$SVN_HTTPD_PATH" -f "$GIT_DIR"/httpd.conf -k start - svnrepo="http://127.0.0.1:$SVN_HTTPD_PORT/$repo_base_path" -} - -stop_httpd () { - test -z "$SVN_HTTPD_PORT" && return - test ! -f "$GIT_DIR/httpd.conf" && return - "$SVN_HTTPD_PATH" -f "$GIT_DIR"/httpd.conf -k stop +maybe_start_httpd () { + loc=${1-svn} + + test_tristate GIT_SVN_TEST_HTTPD + case $GIT_SVN_TEST_HTTPD in + true) + . "$TEST_DIRECTORY"/lib-httpd.sh + LIB_HTTPD_SVN="$loc" + start_httpd + ;; + *) + stop_httpd () { + : noop + } + ;; + esac } convert_to_rev_db () { @@ -186,3 +124,15 @@ start_svnserve () { --listen-host 127.0.0.1 & } +prepare_a_utf8_locale () { + a_utf8_locale=$(locale -a | sed -n '/\.[uU][tT][fF]-*8$/{ + p + q +}') + if test -n "$a_utf8_locale" + then + test_set_prereq UTF8 + else + say "# UTF-8 locale not available, some tests are skipped" + fi +} diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index db2ef22e8f..ec2aa8f687 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -1,9 +1,8 @@ #!/bin/sh gpg_version=$(gpg --version 2>&1) -if test $? = 127; then - say "You do not seem to have gpg installed" -else +if test $? != 127 +then # As said here: http://www.gnupg.org/documentation/faqs.html#q6.19 # the gpg version 1.0.6 didn't parse trust packets correctly, so for # that version, creation of signed tags using the generated key fails. diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index e9714467d0..435a37465a 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -24,7 +24,7 @@ # LIB_HTTPD_MODULE_PATH web server modules path # LIB_HTTPD_PORT listening port # LIB_HTTPD_DAV enable DAV -# LIB_HTTPD_SVN enable SVN +# LIB_HTTPD_SVN enable SVN at given location (e.g. "svn") # LIB_HTTPD_SSL enable SSL # # Copyright (c) 2008 Clemens Buchacher <drizzd@aon.at> @@ -98,8 +98,8 @@ then test_skip_or_die $GIT_TEST_HTTPD "no web server found at '$LIB_HTTPD_PATH'" fi -HTTPD_VERSION=`$LIB_HTTPD_PATH -v | \ - sed -n 's/^Server version: Apache\/\([0-9]*\)\..*$/\1/p; q'` +HTTPD_VERSION=$($LIB_HTTPD_PATH -v | \ + sed -n 's/^Server version: Apache\/\([0-9]*\)\..*$/\1/p; q') if test -n "$HTTPD_VERSION" then @@ -162,8 +162,10 @@ prepare_httpd() { if test -n "$LIB_HTTPD_SVN" then HTTPD_PARA="$HTTPD_PARA -DSVN" - rawsvnrepo="$HTTPD_ROOT_PATH/svnrepo" - svnrepo="http://127.0.0.1:$LIB_HTTPD_PORT/svn" + LIB_HTTPD_SVNPATH="$rawsvnrepo" + svnrepo="http://127.0.0.1:$LIB_HTTPD_PORT/" + svnrepo="$svnrepo$LIB_HTTPD_SVN" + export LIB_HTTPD_SVN LIB_HTTPD_SVNPATH fi fi } @@ -180,6 +182,7 @@ start_httpd() { if test $? -ne 0 then trap 'die' EXIT + cat "$HTTPD_ROOT_PATH"/error.log >&4 2>/dev/null test_skip_or_die $GIT_TEST_HTTPD "web server setup failed" fi } diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 0b81a0047b..69174c6e31 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -64,6 +64,9 @@ LockFile accept.lock <IfModule !mod_mpm_prefork.c> LoadModule mpm_prefork_module modules/mod_mpm_prefork.so </IfModule> +<IfModule !mod_unixd.c> + LoadModule unixd_module modules/mod_unixd.so +</IfModule> </IfVersion> PassEnv GIT_VALGRIND @@ -71,6 +74,7 @@ PassEnv GIT_VALGRIND_OPTIONS PassEnv GNUPGHOME PassEnv ASAN_OPTIONS PassEnv GIT_TRACE +PassEnv GIT_CONFIG_NOSYSTEM Alias /dumb/ www/ Alias /auth/dumb/ www/auth/dumb/ @@ -98,6 +102,10 @@ Alias /auth/dumb/ www/auth/dumb/ SetEnv GIT_HTTP_EXPORT_ALL Header set Set-Cookie name=value </LocationMatch> +<LocationMatch /smart_headers/> + SetEnv GIT_EXEC_PATH ${GIT_EXEC_PATH} + SetEnv GIT_HTTP_EXPORT_ALL +</LocationMatch> ScriptAliasMatch /smart_*[^/]*/(.*) ${GIT_EXEC_PATH}/git-http-backend/$1 ScriptAlias /broken_smart/ broken-smart-http.sh/ ScriptAlias /error/ error.sh/ @@ -115,10 +123,40 @@ ScriptAlias /error/ error.sh/ </Files> RewriteEngine on +RewriteRule ^/dumb-redir/(.*)$ /dumb/$1 [R=301] RewriteRule ^/smart-redir-perm/(.*)$ /smart/$1 [R=301] RewriteRule ^/smart-redir-temp/(.*)$ /smart/$1 [R=302] RewriteRule ^/smart-redir-auth/(.*)$ /auth/smart/$1 [R=301] RewriteRule ^/smart-redir-limited/(.*)/info/refs$ /smart/$1/info/refs [R=301] +RewriteRule ^/ftp-redir/(.*)$ ftp://localhost:1000/$1 [R=302] + +RewriteRule ^/loop-redir/x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-(.*) /$1 [R=302] +RewriteRule ^/loop-redir/(.*)$ /loop-redir/x-$1 [R=302] + +# The first rule issues a client-side redirect to something +# that _doesn't_ look like a git repo. The second rule is a +# server-side rewrite, so that it turns out the odd-looking +# thing _is_ a git repo. The "[PT]" tells Apache to match +# the usual ScriptAlias rules for /smart. +RewriteRule ^/insane-redir/(.*)$ /intern-redir/$1/foo [R=301] +RewriteRule ^/intern-redir/(.*)/foo$ /smart/$1 [PT] + +# Serve info/refs internally without redirecting, but +# issue a redirect for any object requests. +RewriteRule ^/redir-objects/(.*/info/refs)$ /dumb/$1 [PT] +RewriteRule ^/redir-objects/(.*/objects/.*)$ /dumb/$1 [R=301] + +# Apache 2.2 does not understand <RequireAll>, so we use RewriteCond. +# And as RewriteCond does not allow testing for non-matches, we match +# the desired case first (one has abra, two has cadabra), and let it +# pass by marking the RewriteRule as [L], "last rule, do not process +# any other matching RewriteRules after this"), and then have another +# RewriteRule that matches all other cases and lets them fail via '[F]', +# "fail the request". +RewriteCond %{HTTP:x-magic-one} =abra +RewriteCond %{HTTP:x-magic-two} =cadabra +RewriteRule ^/smart_headers/.* - [L] +RewriteRule ^/smart_headers/.* - [F] <IfDefine SSL> LoadModule ssl_module modules/mod_ssl.so @@ -184,8 +222,8 @@ RewriteRule ^/half-auth-complete/ - [E=AUTHREQUIRED:yes] <IfDefine SVN> LoadModule dav_svn_module modules/mod_dav_svn.so - <Location /svn> + <Location /${LIB_HTTPD_SVN}> DAV svn - SVNPath svnrepo + SVNPath "${LIB_HTTPD_SVNPATH}" </Location> </IfDefine> diff --git a/t/lib-proto-disable.sh b/t/lib-proto-disable.sh new file mode 100644 index 0000000000..02f49cb409 --- /dev/null +++ b/t/lib-proto-disable.sh @@ -0,0 +1,216 @@ +# Test routines for checking protocol disabling. + +# Test clone/fetch/push with GIT_ALLOW_PROTOCOL whitelist +test_whitelist () { + desc=$1 + proto=$2 + url=$3 + + test_expect_success "clone $desc (enabled)" ' + rm -rf tmp.git && + ( + GIT_ALLOW_PROTOCOL=$proto && + export GIT_ALLOW_PROTOCOL && + git clone --bare "$url" tmp.git + ) + ' + + test_expect_success "fetch $desc (enabled)" ' + ( + cd tmp.git && + GIT_ALLOW_PROTOCOL=$proto && + export GIT_ALLOW_PROTOCOL && + git fetch + ) + ' + + test_expect_success "push $desc (enabled)" ' + ( + cd tmp.git && + GIT_ALLOW_PROTOCOL=$proto && + export GIT_ALLOW_PROTOCOL && + git push origin HEAD:pushed + ) + ' + + test_expect_success "push $desc (disabled)" ' + ( + cd tmp.git && + GIT_ALLOW_PROTOCOL=none && + export GIT_ALLOW_PROTOCOL && + test_must_fail git push origin HEAD:pushed + ) + ' + + test_expect_success "fetch $desc (disabled)" ' + ( + cd tmp.git && + GIT_ALLOW_PROTOCOL=none && + export GIT_ALLOW_PROTOCOL && + test_must_fail git fetch + ) + ' + + test_expect_success "clone $desc (disabled)" ' + rm -rf tmp.git && + ( + GIT_ALLOW_PROTOCOL=none && + export GIT_ALLOW_PROTOCOL && + test_must_fail git clone --bare "$url" tmp.git + ) + ' + + test_expect_success "clone $desc (env var has precedence)" ' + rm -rf tmp.git && + ( + GIT_ALLOW_PROTOCOL=none && + export GIT_ALLOW_PROTOCOL && + test_must_fail git -c protocol.allow=always clone --bare "$url" tmp.git && + test_must_fail git -c protocol.$proto.allow=always clone --bare "$url" tmp.git + ) + ' +} + +test_config () { + desc=$1 + proto=$2 + url=$3 + + # Test clone/fetch/push with protocol.<type>.allow config + test_expect_success "clone $desc (enabled with config)" ' + rm -rf tmp.git && + git -c protocol.$proto.allow=always clone --bare "$url" tmp.git + ' + + test_expect_success "fetch $desc (enabled)" ' + git -C tmp.git -c protocol.$proto.allow=always fetch + ' + + test_expect_success "push $desc (enabled)" ' + git -C tmp.git -c protocol.$proto.allow=always push origin HEAD:pushed + ' + + test_expect_success "push $desc (disabled)" ' + test_must_fail git -C tmp.git -c protocol.$proto.allow=never push origin HEAD:pushed + ' + + test_expect_success "fetch $desc (disabled)" ' + test_must_fail git -C tmp.git -c protocol.$proto.allow=never fetch + ' + + test_expect_success "clone $desc (disabled)" ' + rm -rf tmp.git && + test_must_fail git -c protocol.$proto.allow=never clone --bare "$url" tmp.git + ' + + # Test clone/fetch/push with protocol.user.allow and its env var + test_expect_success "clone $desc (enabled)" ' + rm -rf tmp.git && + git -c protocol.$proto.allow=user clone --bare "$url" tmp.git + ' + + test_expect_success "fetch $desc (enabled)" ' + git -C tmp.git -c protocol.$proto.allow=user fetch + ' + + test_expect_success "push $desc (enabled)" ' + git -C tmp.git -c protocol.$proto.allow=user push origin HEAD:pushed + ' + + test_expect_success "push $desc (disabled)" ' + ( + cd tmp.git && + GIT_PROTOCOL_FROM_USER=0 && + export GIT_PROTOCOL_FROM_USER && + test_must_fail git -c protocol.$proto.allow=user push origin HEAD:pushed + ) + ' + + test_expect_success "fetch $desc (disabled)" ' + ( + cd tmp.git && + GIT_PROTOCOL_FROM_USER=0 && + export GIT_PROTOCOL_FROM_USER && + test_must_fail git -c protocol.$proto.allow=user fetch + ) + ' + + test_expect_success "clone $desc (disabled)" ' + rm -rf tmp.git && + ( + GIT_PROTOCOL_FROM_USER=0 && + export GIT_PROTOCOL_FROM_USER && + test_must_fail git -c protocol.$proto.allow=user clone --bare "$url" tmp.git + ) + ' + + # Test clone/fetch/push with protocol.allow user defined default + test_expect_success "clone $desc (enabled)" ' + rm -rf tmp.git && + git config --global protocol.allow always && + git clone --bare "$url" tmp.git + ' + + test_expect_success "fetch $desc (enabled)" ' + git -C tmp.git fetch + ' + + test_expect_success "push $desc (enabled)" ' + git -C tmp.git push origin HEAD:pushed + ' + + test_expect_success "push $desc (disabled)" ' + git config --global protocol.allow never && + test_must_fail git -C tmp.git push origin HEAD:pushed + ' + + test_expect_success "fetch $desc (disabled)" ' + test_must_fail git -C tmp.git fetch + ' + + test_expect_success "clone $desc (disabled)" ' + rm -rf tmp.git && + test_must_fail git clone --bare "$url" tmp.git + ' +} + +# test cloning a particular protocol +# $1 - description of the protocol +# $2 - machine-readable name of the protocol +# $3 - the URL to try cloning +test_proto () { + test_whitelist "$@" + + test_config "$@" +} + +# set up an ssh wrapper that will access $host/$repo in the +# trash directory, and enable it for subsequent tests. +setup_ssh_wrapper () { + test_expect_success 'setup ssh wrapper' ' + write_script ssh-wrapper <<-\EOF && + echo >&2 "ssh: $*" + host=$1; shift + cd "$TRASH_DIRECTORY/$host" && + eval "$*" + EOF + GIT_SSH="$PWD/ssh-wrapper" && + export GIT_SSH && + export TRASH_DIRECTORY + ' +} + +# set up a wrapper that can be used with remote-ext to +# access repositories in the "remote" directory of trash-dir, +# like "ext::fake-remote %S repo.git" +setup_ext_wrapper () { + test_expect_success 'setup ext wrapper' ' + write_script fake-remote <<-\EOF && + echo >&2 "fake-remote: $*" + cd "$TRASH_DIRECTORY/remote" && + eval "$*" + EOF + PATH=$TRASH_DIRECTORY:$PATH && + export TRASH_DIRECTORY + ' +} diff --git a/t/lib-rebase.sh b/t/lib-rebase.sh index 6bd252212a..25a77ee5cb 100644 --- a/t/lib-rebase.sh +++ b/t/lib-rebase.sh @@ -14,7 +14,7 @@ # specified line. # # "<cmd> <lineno>" -- add a line with the specified command -# ("squash", "fixup", "edit", or "reword") and the SHA1 taken +# ("squash", "fixup", "edit", "reword" or "drop") and the SHA1 taken # from the specified line. # # "exec_cmd_with_args" -- add an "exec cmd with args" line. @@ -29,6 +29,7 @@ set_fake_editor () { */COMMIT_EDITMSG) test -z "$EXPECT_HEADER_COUNT" || test "$EXPECT_HEADER_COUNT" = "$(sed -n '1s/^# This is a combination of \(.*\) commits\./\1/p' < "$1")" || + test "# # GETTEXT POISON #" = "$(sed -n '1p' < "$1")" || exit test -z "$FAKE_COMMIT_MESSAGE" || echo "$FAKE_COMMIT_MESSAGE" > "$1" test -z "$FAKE_COMMIT_AMEND" || echo "$FAKE_COMMIT_AMEND" >> "$1" @@ -46,7 +47,7 @@ set_fake_editor () { action=pick for line in $FAKE_LINES; do case $line in - squash|fixup|edit|reword) + squash|fixup|edit|reword|drop) action="$line";; exec*) echo "$line" | sed 's/_/ /g' >> "$1";; @@ -54,6 +55,11 @@ set_fake_editor () { echo '# comment' >> "$1";; ">") echo >> "$1";; + bad) + action="badcmd";; + fakesha) + echo "$action XXXXXXX False commit" >> "$1" + action=pick;; *) sed -n "${line}s/^pick/$action/p" < "$1".tmp >> "$1" action=pick;; diff --git a/t/perf/README b/t/perf/README index 8848c14619..49ea4349be 100644 --- a/t/perf/README +++ b/t/perf/README @@ -115,8 +115,16 @@ After that you will want to use some of the following: At least one of the first two is required! -You can use test_expect_success as usual. For actual performance -tests, use +You can use test_expect_success as usual. In both test_expect_success +and in test_perf, running "git" points to the version that is being +perf-tested. The $MODERN_GIT variable points to the git wrapper for the +currently checked-out version (i.e., the one that matches the t/perf +scripts you are running). This is useful if your setup uses commands +that only work with newer versions of git than what you might want to +test (but obviously your new commands must still create a state that can +be used by the older version of git you are testing). + +For actual performance tests, use test_perf 'descriptive string' ' command1 && diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index 15f7fc1b80..924b19dab4 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -1,5 +1,6 @@ #!/usr/bin/perl +use lib '../../perl/blib/lib'; use strict; use warnings; use Git; diff --git a/t/perf/p0003-delta-base-cache.sh b/t/perf/p0003-delta-base-cache.sh new file mode 100755 index 0000000000..62369eaaf0 --- /dev/null +++ b/t/perf/p0003-delta-base-cache.sh @@ -0,0 +1,31 @@ +#!/bin/sh + +test_description='Test operations that emphasize the delta base cache. + +We look at both "log --raw", which should put only trees into the delta cache, +and "log -Sfoo --raw", which should look at both trees and blobs. + +Any effects will be emphasized if the test repository is fully packed (loose +objects obviously do not use the delta base cache at all). It is also +emphasized if the pack has long delta chains (e.g., as produced by "gc +--aggressive"), though cache is still quite noticeable even with the default +depth of 50. + +The setting of core.deltaBaseCacheLimit in the source repository is also +relevant (depending on the size of your test repo), so be sure it is consistent +between runs. +' +. ./perf-lib.sh + +test_perf_large_repo + +# puts mostly trees into the delta base cache +test_perf 'log --raw' ' + git log --raw >/dev/null +' + +test_perf 'log -S' ' + git log --raw -Sfoo >/dev/null +' + +test_done diff --git a/t/perf/p3400-rebase.sh b/t/perf/p3400-rebase.sh new file mode 100755 index 0000000000..b3e7d525d2 --- /dev/null +++ b/t/perf/p3400-rebase.sh @@ -0,0 +1,36 @@ +#!/bin/sh + +test_description='Tests rebase performance' +. ./perf-lib.sh + +test_perf_default_repo + +test_expect_success 'setup' ' + git checkout -f -b base && + git checkout -b to-rebase && + git checkout -b upstream && + for i in $(seq 100) + do + # simulate huge diffs + echo change$i >unrelated-file$i && + seq 1000 >>unrelated-file$i && + git add unrelated-file$i && + test_tick && + git commit -m commit$i unrelated-file$i && + echo change$i >unrelated-file$i && + seq 1000 | tac >>unrelated-file$i && + git add unrelated-file$i && + test_tick && + git commit -m commit$i-reverse unrelated-file$i || + break + done && + git checkout to-rebase && + test_commit our-patch interesting-file +' + +test_perf 'rebase on top of a lot of unrelated changes' ' + git rebase --onto upstream HEAD^ && + git rebase --onto base HEAD^ +' + +test_done diff --git a/t/perf/p3404-rebase-interactive.sh b/t/perf/p3404-rebase-interactive.sh new file mode 100755 index 0000000000..88f47de282 --- /dev/null +++ b/t/perf/p3404-rebase-interactive.sh @@ -0,0 +1,36 @@ +#!/bin/sh + +test_description='Tests rebase -i performance' +. ./perf-lib.sh + +test_perf_default_repo + +# This commit merges a sufficiently long topic branch for reasonable +# performance testing +branch_merge=ba5312da19c6fdb6c6747d479f58932aae6e900c^{commit} +export branch_merge + +git rev-parse --verify $branch_merge >/dev/null 2>&1 || { + skip_all='skipping because $branch_merge was not found' + test_done +} + +write_script swap-first-two.sh <<\EOF +case "$1" in +*/COMMIT_EDITMSG) + mv "$1" "$1".bak && + sed -e '1{h;d}' -e 2G <"$1".bak >"$1" + ;; +esac +EOF + +test_expect_success 'setup' ' + git config core.editor "\"$PWD"/swap-first-two.sh\" && + git checkout -f $branch_merge^2 +' + +test_perf 'rebase -i' ' + git rebase -i $branch_merge^ +' + +test_done diff --git a/t/perf/p4211-line-log.sh b/t/perf/p4211-line-log.sh index 3d074b0e41..b7ff68d4fa 100755 --- a/t/perf/p4211-line-log.sh +++ b/t/perf/p4211-line-log.sh @@ -23,11 +23,11 @@ test_perf 'git log --follow (baseline for -M)' ' git log --oneline --follow -- "$file" >/dev/null ' -test_perf 'git log -L' ' - git log -L 1:"$file" >/dev/null +test_perf 'git log -L (renames off)' ' + git log --no-renames -L 1:"$file" >/dev/null ' -test_perf 'git log -M -L' ' +test_perf 'git log -L (renames on)' ' git log -M -L 1:"$file" >/dev/null ' diff --git a/t/perf/p5303-many-packs.sh b/t/perf/p5303-many-packs.sh new file mode 100755 index 0000000000..3779851941 --- /dev/null +++ b/t/perf/p5303-many-packs.sh @@ -0,0 +1,87 @@ +#!/bin/sh + +test_description='performance with large numbers of packs' +. ./perf-lib.sh + +test_perf_large_repo + +# A real many-pack situation would probably come from having a lot of pushes +# over time. We don't know how big each push would be, but we can fake it by +# just walking the first-parent chain and having every 5 commits be their own +# "push". This isn't _entirely_ accurate, as real pushes would have some +# duplicate objects due to thin-pack fixing, but it's a reasonable +# approximation. +# +# And then all of the rest of the objects can go in a single packfile that +# represents the state before any of those pushes (actually, we'll generate +# that first because in such a setup it would be the oldest pack, and we sort +# the packs by reverse mtime inside git). +repack_into_n () { + rm -rf staging && + mkdir staging && + + git rev-list --first-parent HEAD | + sed -n '1~5p' | + head -n "$1" | + perl -e 'print reverse <>' \ + >pushes + + # create base packfile + head -n 1 pushes | + git pack-objects --delta-base-offset --revs staging/pack + + # and then incrementals between each pair of commits + last= && + while read rev + do + if test -n "$last"; then + { + echo "$rev" && + echo "^$last" + } | + git pack-objects --delta-base-offset --revs \ + staging/pack || return 1 + fi + last=$rev + done <pushes && + + # and install the whole thing + rm -f .git/objects/pack/* && + mv staging/* .git/objects/pack/ +} + +# Pretend we just have a single branch and no reflogs, and that everything is +# in objects/pack; that makes our fake pack-building via repack_into_n() +# much simpler. +test_expect_success 'simplify reachability' ' + tip=$(git rev-parse --verify HEAD) && + git for-each-ref --format="option no-deref%0adelete %(refname)" | + git update-ref --stdin && + rm -rf .git/logs && + git update-ref refs/heads/master $tip && + git symbolic-ref HEAD refs/heads/master && + git repack -ad +' + +for nr_packs in 1 50 1000 +do + test_expect_success "create $nr_packs-pack scenario" ' + repack_into_n $nr_packs + ' + + test_perf "rev-list ($nr_packs)" ' + git rev-list --objects --all >/dev/null + ' + + # This simulates the interesting part of the repack, which is the + # actual pack generation, without smudging the on-disk setup + # between trials. + test_perf "repack ($nr_packs)" ' + git pack-objects --keep-true-parents \ + --honor-pack-keep --non-empty --all \ + --reflog --indexed-objects --delta-base-offset \ + --stdout </dev/null >/dev/null + ' +done + +test_done diff --git a/t/perf/p5310-pack-bitmaps.sh b/t/perf/p5310-pack-bitmaps.sh index f8ed8573b7..bb91dbb173 100755 --- a/t/perf/p5310-pack-bitmaps.sh +++ b/t/perf/p5310-pack-bitmaps.sh @@ -32,6 +32,14 @@ test_perf 'simulated fetch' ' } | git pack-objects --revs --stdout >/dev/null ' +test_perf 'pack to file' ' + git pack-objects --all pack1 </dev/null >/dev/null +' + +test_perf 'pack to file (bitmap)' ' + git pack-objects --use-bitmap-index --all pack1b </dev/null >/dev/null +' + test_expect_success 'create partial bitmap state' ' # pick a commit to represent the repo tip in the past cutoff=$(git rev-list HEAD~100 -1) && @@ -39,22 +47,26 @@ test_expect_success 'create partial bitmap state' ' # now kill off all of the refs and pretend we had # just the one tip - rm -rf .git/logs .git/refs/* .git/packed-refs - git update-ref HEAD $cutoff + rm -rf .git/logs .git/refs/* .git/packed-refs && + git update-ref HEAD $cutoff && # and then repack, which will leave us with a nice # big bitmap pack of the "old" history, and all of # the new history will be loose, as if it had been pushed # up incrementally and exploded via unpack-objects - git repack -Ad + git repack -Ad && # and now restore our original tip, as if the pushes # had happened git update-ref HEAD $orig_tip ' -test_perf 'partial bitmap' ' +test_perf 'clone (partial bitmap)' ' git pack-objects --stdout --all </dev/null >/dev/null ' +test_perf 'pack to file (partial bitmap)' ' + git pack-objects --use-bitmap-index --all pack2b </dev/null >/dev/null +' + test_done diff --git a/t/perf/p5550-fetch-tags.sh b/t/perf/p5550-fetch-tags.sh new file mode 100755 index 0000000000..a5dc39f86a --- /dev/null +++ b/t/perf/p5550-fetch-tags.sh @@ -0,0 +1,99 @@ +#!/bin/sh + +test_description='performance of tag-following with many tags + +This tests a fairly pathological case, so rather than rely on a real-world +case, we will construct our own repository. The situation is roughly as +follows. + +The parent repository has a large number of tags which are disconnected from +the rest of history. That makes them candidates for tag-following, but we never +actually grab them (and thus they will impact each subsequent fetch). + +The child repository is a clone of parent, without the tags, and is at least +one commit behind the parent (meaning that we will fetch one object and then +examine the tags to see if they need followed). Furthermore, it has a large +number of packs. + +The exact values of "large" here are somewhat arbitrary; I picked values that +start to show a noticeable performance problem on my machine, but without +taking too long to set up and run the tests. +' +. ./perf-lib.sh + +# make a long nonsense history on branch $1, consisting of $2 commits, each +# with a unique file pointing to the blob at $2. +create_history () { + perl -le ' + my ($branch, $n, $blob) = @ARGV; + for (1..$n) { + print "commit refs/heads/$branch"; + print "committer nobody <nobody@example.com> now"; + print "data 4"; + print "foo"; + print "M 100644 $blob $_"; + } + ' "$@" | + git fast-import --date-format=now +} + +# make a series of tags, one per commit in the revision range given by $@ +create_tags () { + git rev-list "$@" | + perl -lne 'print "create refs/tags/$. $_"' | + git update-ref --stdin +} + +# create $1 nonsense packs, each with a single blob +create_packs () { + perl -le ' + my ($n) = @ARGV; + for (1..$n) { + print "blob"; + print "data <<EOF"; + print "$_"; + print "EOF"; + } + ' "$@" | + git fast-import && + + git cat-file --batch-all-objects --batch-check='%(objectname)' | + while read sha1 + do + echo $sha1 | git pack-objects .git/objects/pack/pack + done +} + +test_expect_success 'create parent and child' ' + git init parent && + git -C parent commit --allow-empty -m base && + git clone parent child && + git -C parent commit --allow-empty -m trigger-fetch +' + +test_expect_success 'populate parent tags' ' + ( + cd parent && + blob=$(echo content | git hash-object -w --stdin) && + create_history cruft 3000 $blob && + create_tags cruft && + git branch -D cruft + ) +' + +test_expect_success 'create child packs' ' + ( + cd child && + git config gc.auto 0 && + git config gc.autopacklimit 0 && + create_packs 500 + ) +' + +test_perf 'fetch' ' + # make sure there is something to fetch on each iteration + git -C child update-ref -d refs/remotes/origin/master && + git -C child fetch +' + +test_done diff --git a/t/perf/p7000-filter-branch.sh b/t/perf/p7000-filter-branch.sh new file mode 100755 index 0000000000..15ee5d1d53 --- /dev/null +++ b/t/perf/p7000-filter-branch.sh @@ -0,0 +1,19 @@ +#!/bin/sh + +test_description='performance of filter-branch' +. ./perf-lib.sh + +test_perf_default_repo +test_checkout_worktree + +test_expect_success 'mark bases for tests' ' + git tag -f tip && + git tag -f base HEAD~100 +' + +test_perf 'noop filter' ' + git checkout --detach tip && + git filter-branch -f base..HEAD +' + +test_done diff --git a/t/perf/p7300-clean.sh b/t/perf/p7300-clean.sh new file mode 100755 index 0000000000..7c1888a27e --- /dev/null +++ b/t/perf/p7300-clean.sh @@ -0,0 +1,35 @@ +#!/bin/sh + +test_description="Test git-clean performance" + +. ./perf-lib.sh + +test_perf_default_repo +test_checkout_worktree + +test_expect_success 'setup untracked directory with many sub dirs' ' + rm -rf 500_sub_dirs 100000_sub_dirs clean_test_dir && + mkdir 500_sub_dirs 100000_sub_dirs clean_test_dir && + for i in $(test_seq 1 500) + do + mkdir 500_sub_dirs/dir$i || return $? + done && + for i in $(test_seq 1 200) + do + cp -r 500_sub_dirs 100000_sub_dirs/dir$i || return $? + done +' + +test_perf 'clean many untracked sub dirs, check for nested git' ' + git clean -n -q -f -d 100000_sub_dirs/ +' + +test_perf 'clean many untracked sub dirs, ignore nested git' ' + git clean -n -q -f -f -d 100000_sub_dirs/ +' + +test_perf 'ls-files -o' ' + git ls-files -o +' + +test_done diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh index 5cf74eddec..46f08ee087 100644 --- a/t/perf/perf-lib.sh +++ b/t/perf/perf-lib.sh @@ -52,6 +52,9 @@ TEST_NO_MALLOC_CHECK=t # need to export them for test_perf subshells export TEST_DIRECTORY TRASH_DIRECTORY GIT_BUILD_DIR GIT_TEST_CMP +MODERN_GIT=$GIT_BUILD_DIR/bin-wrappers/git +export MODERN_GIT + perf_results_dir=$TEST_OUTPUT_DIRECTORY/test-results mkdir -p "$perf_results_dir" rm -f "$perf_results_dir"/$(basename "$0" .sh).subtests @@ -80,23 +83,29 @@ test_perf_create_repo_from () { error "bug in the test script: not 2 parameters to test-create-repo" repo="$1" source="$2" - source_git=$source/$(cd "$source" && git rev-parse --git-dir) + source_git="$(git -C "$source" rev-parse --git-dir)" + objects_dir="$("$MODERN_GIT" -C "$source" rev-parse --git-path objects)" mkdir -p "$repo/.git" ( - cd "$repo/.git" && - { cp -Rl "$source_git/objects" . 2>/dev/null || - cp -R "$source_git/objects" .; } && + cd "$source" && + { cp -Rl "$objects_dir" "$repo/.git/" 2>/dev/null || + cp -R "$objects_dir" "$repo/.git/"; } && for stuff in "$source_git"/*; do case "$stuff" in - */objects|*/hooks|*/config) + */objects|*/hooks|*/config|*/commondir) ;; *) - cp -R "$stuff" . || exit 1 + cp -R "$stuff" "$repo/.git/" || exit 1 ;; esac - done && - cd .. && - git init -q && + done + ) && + ( + cd "$repo" && + git init -q && { + test_have_prereq SYMLINKS || + git config core.symlinks false + } && mv .git/hooks .git/hooks-disabled 2>/dev/null ) || error "failed to copy repository '$source' to '$repo'" } @@ -121,11 +130,15 @@ test_checkout_worktree () { # Performance tests should never fail. If they do, stop immediately immediate=t +# Perf tests require GNU time +case "$(uname -s)" in Darwin) GTIME="${GTIME:-gtime}";; esac +GTIME="${GTIME:-/usr/bin/time}" + test_run_perf_ () { test_cleanup=: test_export_="test_cleanup" export test_cleanup test_export_ - /usr/bin/time -f "%E %U %S" -o test_time.$i "$SHELL" -c ' + "$GTIME" -f "%E %U %S" -o test_time.$i "$SHELL" -c ' . '"$TEST_DIRECTORY"/test-lib-functions.sh' test_export () { [ $# != 0 ] || return 0 diff --git a/t/perf/run b/t/perf/run index cfd70129bb..e8adedadfd 100755 --- a/t/perf/run +++ b/t/perf/run @@ -30,7 +30,13 @@ unpack_git_rev () { } build_git_rev () { rev=$1 - cp ../../config.mak build/$rev/config.mak + for config in config.mak config.mak.autogen config.status + do + if test -e "../../$config" + then + cp "../../$config" "build/$rev/" + fi + done (cd build/$rev && make $GIT_PERF_MAKE_OPTS) || die "failed to build revision '$mydir'" } diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 79b9074172..1aa5093f36 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -98,7 +98,7 @@ check_sub_test_lib_test () { } check_sub_test_lib_test_err () { - name="$1" # stdin is the expected output output from the test + name="$1" # stdin is the expected output from the test # expected error output is in descriptior 3 ( cd "$name" && @@ -834,7 +834,7 @@ test_expect_success 'git write-tree should be able to write an empty tree' ' ' test_expect_success 'validate object ID of a known tree' ' - test "$tree" = 4b825dc642cb6eb9a060e54bf8d69288fbee4904 + test "$tree" = $EMPTY_TREE ' # Various types of objects diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 7de8d85ee8..b8fc588b19 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -87,6 +87,21 @@ test_expect_success 'plain nested in bare through aliased command' ' check_config bare-ancestor-aliased.git/plain-nested/.git false unset ' +test_expect_success 'No extra GIT_* on alias scripts' ' + write_script script <<-\EOF && + env | + sed -n \ + -e "/^GIT_PREFIX=/d" \ + -e "/^GIT_TEXTDOMAINDIR=/d" \ + -e "/^GIT_/s/=.*//p" | + sort + EOF + ./script >expected && + git config alias.script \!./script && + ( mkdir sub && cd sub && git script >../actual ) && + test_cmp expected actual +' + test_expect_success 'plain with GIT_WORK_TREE' ' mkdir plain-wt && test_must_fail env GIT_WORK_TREE="$(pwd)/plain-wt" git init plain-wt @@ -202,8 +217,8 @@ test_expect_success 'init honors global core.sharedRepository' ' x$(git config -f shared-honor-global/.git/config core.sharedRepository) ' -test_expect_success 'init rejects insanely long --template' ' - test_must_fail git init --template=$(printf "x%09999dx" 1) test +test_expect_success 'init allows insanely long --template' ' + git init --template=$(printf "x%09999dx" 1) test ' test_expect_success 'init creates a new directory' ' @@ -339,4 +354,60 @@ test_expect_success SYMLINKS 're-init to move gitdir symlink' ' test_path_is_dir realgitdir/refs ' +# Tests for the hidden file attribute on windows +is_hidden () { + # Use the output of `attrib`, ignore the absolute path + case "$(attrib "$1")" in *H*?:*) return 0;; esac + return 1 +} + +test_expect_success MINGW '.git hidden' ' + rm -rf newdir && + ( + unset GIT_DIR GIT_WORK_TREE + mkdir newdir && + cd newdir && + git init && + is_hidden .git + ) && + check_config newdir/.git false unset +' + +test_expect_success MINGW 'bare git dir not hidden' ' + rm -rf newdir && + ( + unset GIT_DIR GIT_WORK_TREE GIT_CONFIG + mkdir newdir && + cd newdir && + git --bare init + ) && + ! is_hidden newdir +' + +test_expect_success 'remote init from does not use config from cwd' ' + rm -rf newdir && + test_config core.logallrefupdates true && + git init newdir && + echo true >expect && + git -C newdir config --bool core.logallrefupdates >actual && + test_cmp expect actual +' + +test_expect_success 're-init from a linked worktree' ' + git init main-worktree && + ( + cd main-worktree && + test_commit first && + git worktree add ../linked-worktree && + mv .git/info/exclude expected-exclude && + cp .git/config expected-config && + find .git/worktrees -print | sort >expected && + git -C ../linked-worktree init && + test_cmp expected-exclude .git/info/exclude && + test_cmp expected-config .git/config && + find .git/worktrees -print | sort >actual && + test_cmp expected actual + ) +' + test_done diff --git a/t/t0002-gitfile.sh b/t/t0002-gitfile.sh index 37e9396e5d..9670e8cbe6 100755 --- a/t/t0002-gitfile.sh +++ b/t/t0002-gitfile.sh @@ -99,4 +99,63 @@ test_expect_success 'check rev-list' ' test "$SHA" = "$(git rev-list HEAD)" ' +test_expect_success 'setup_git_dir twice in subdir' ' + git init sgd && + ( + cd sgd && + git config alias.lsfi ls-files && + mv .git .realgit && + echo "gitdir: .realgit" >.git && + mkdir subdir && + cd subdir && + >foo && + git add foo && + git lsfi >actual && + echo foo >expected && + test_cmp expected actual + ) +' + +test_expect_success 'enter_repo non-strict mode' ' + test_create_repo enter_repo && + ( + cd enter_repo && + test_tick && + test_commit foo && + mv .git .realgit && + echo "gitdir: .realgit" >.git + ) && + git ls-remote enter_repo >actual && + cat >expected <<-\EOF && + 946e985ab20de757ca5b872b16d64e92ff3803a9 HEAD + 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/heads/master + 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/tags/foo + EOF + test_cmp expected actual +' + +test_expect_success 'enter_repo linked checkout' ' + ( + cd enter_repo && + git worktree add ../foo refs/tags/foo + ) && + git ls-remote foo >actual && + cat >expected <<-\EOF && + 946e985ab20de757ca5b872b16d64e92ff3803a9 HEAD + 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/heads/master + 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/tags/foo + EOF + test_cmp expected actual +' + +test_expect_success 'enter_repo strict mode' ' + git ls-remote --upload-pack="git upload-pack --strict" foo/.git >actual && + cat >expected <<-\EOF && + 946e985ab20de757ca5b872b16d64e92ff3803a9 HEAD + 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/heads/master + 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/tags/foo + EOF + test_cmp expected actual +' + test_done diff --git a/t/t0005-signals.sh b/t/t0005-signals.sh index e7f27ebbc1..46042f1f13 100755 --- a/t/t0005-signals.sh +++ b/t/t0005-signals.sh @@ -11,12 +11,13 @@ EOF test_expect_success 'sigchain works' ' { test-sigchain >actual; ret=$?; } && - case "$ret" in - 143) true ;; # POSIX w/ SIGTERM=15 - 271) true ;; # ksh w/ SIGTERM=15 - 3) true ;; # Windows - *) false ;; - esac && + { + # Signal death by raise() on Windows acts like exit(3), + # regardless of the signal number. So we must allow that + # as well as the normal signal check. + test_match_signal 15 "$ret" || + test "$ret" = 3 + } && test_cmp expect actual ' @@ -41,12 +42,12 @@ test_expect_success 'create blob' ' test_expect_success !MINGW 'a constipated git dies with SIGPIPE' ' OUT=$( ((large_git; echo $? 1>&3) | :) 3>&1 ) && - test "$OUT" -eq 141 + test_match_signal 13 "$OUT" ' test_expect_success !MINGW 'a constipated git dies with SIGPIPE even if parent ignores it' ' OUT=$( ((trap "" PIPE; large_git; echo $? 1>&3) | :) 3>&1 ) && - test "$OUT" -eq 141 + test_match_signal 13 "$OUT" ' test_done diff --git a/t/t0006-date.sh b/t/t0006-date.sh index fac0986134..c0c910867d 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -6,26 +6,55 @@ test_description='test date parsing and printing' # arbitrary reference time: 2009-08-30 19:20:00 TEST_DATE_NOW=1251660000; export TEST_DATE_NOW -check_show() { +check_relative() { t=$(($TEST_DATE_NOW - $1)) echo "$t -> $2" >expect test_expect_${3:-success} "relative date ($2)" " - test-date show $t >actual && + test-date relative $t >actual && test_i18ncmp expect actual " } -check_show 5 '5 seconds ago' -check_show 300 '5 minutes ago' -check_show 18000 '5 hours ago' -check_show 432000 '5 days ago' -check_show 1728000 '3 weeks ago' -check_show 13000000 '5 months ago' -check_show 37500000 '1 year, 2 months ago' -check_show 55188000 '1 year, 9 months ago' -check_show 630000000 '20 years ago' -check_show 31449600 '12 months ago' -check_show 62985600 '2 years ago' +check_relative 5 '5 seconds ago' +check_relative 300 '5 minutes ago' +check_relative 18000 '5 hours ago' +check_relative 432000 '5 days ago' +check_relative 1728000 '3 weeks ago' +check_relative 13000000 '5 months ago' +check_relative 37500000 '1 year, 2 months ago' +check_relative 55188000 '1 year, 9 months ago' +check_relative 630000000 '20 years ago' +check_relative 31449600 '12 months ago' +check_relative 62985600 '2 years ago' + +check_show () { + format=$1 + time=$2 + expect=$3 + test_expect_success $4 "show date ($format:$time)" ' + echo "$time -> $expect" >expect && + test-date show:$format "$time" >actual && + test_cmp expect actual + ' +} + +# arbitrary but sensible time for examples +TIME='1466000000 +0200' +check_show iso8601 "$TIME" '2016-06-15 16:13:20 +0200' +check_show iso8601-strict "$TIME" '2016-06-15T16:13:20+02:00' +check_show rfc2822 "$TIME" 'Wed, 15 Jun 2016 16:13:20 +0200' +check_show short "$TIME" '2016-06-15' +check_show default "$TIME" 'Wed Jun 15 16:13:20 2016 +0200' +check_show raw "$TIME" '1466000000 +0200' +check_show unix "$TIME" '1466000000' +check_show iso-local "$TIME" '2016-06-15 14:13:20 +0000' +check_show raw-local "$TIME" '1466000000 +0000' +check_show unix-local "$TIME" '1466000000' + +# arbitrary time absurdly far in the future +FUTURE="5758122296 -0400" +check_show iso "$FUTURE" "2152-06-19 18:24:56 -0400" LONG_IS_64BIT +check_show iso-local "$FUTURE" "2152-06-19 22:24:56 +0000" LONG_IS_64BIT check_parse() { echo "$1 -> $2" >expect diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index 4ef5ed484c..d27f438bf4 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -5,7 +5,7 @@ test_description=check-ignore . ./test-lib.sh init_vars () { - global_excludes="$(pwd)/global-excludes" + global_excludes="global-excludes" } enable_global_excludes () { @@ -34,7 +34,7 @@ expect_from_stdin () { test_stderr () { expected="$1" expect_in stderr "$1" && - test_cmp "$HOME/expected-stderr" "$HOME/stderr" + test_i18ncmp "$HOME/expected-stderr" "$HOME/stderr" } broken_c_unquote () { @@ -47,7 +47,7 @@ broken_c_unquote_verbose () { stderr_contains () { regexp="$1" - if grep "$regexp" "$HOME/stderr" + if test_i18ngrep "$regexp" "$HOME/stderr" then return 0 else @@ -605,7 +605,7 @@ cat <<-EOF >expected-verbose a/b/.gitignore:8:!on* a/b/one a/b/.gitignore:8:!on* a/b/one one a/b/.gitignore:8:!on* a/b/one two - a/b/.gitignore:8:!on* "a/b/one\"three" + a/b/.gitignore:8:!on* "a/b/one\\"three" a/b/.gitignore:9:!two a/b/two a/.gitignore:1:two* a/b/twooo $global_excludes:2:!globaltwo globaltwo @@ -686,7 +686,7 @@ cat <<-EOF >expected-all a/b/.gitignore:8:!on* b/one a/b/.gitignore:8:!on* b/one one a/b/.gitignore:8:!on* b/one two - a/b/.gitignore:8:!on* "b/one\"three" + a/b/.gitignore:8:!on* "b/one\\"three" a/b/.gitignore:9:!two b/two :: b/not-ignored a/.gitignore:1:two* b/twooo diff --git a/t/t0012-help.sh b/t/t0012-help.sh new file mode 100755 index 0000000000..8faba2e8bc --- /dev/null +++ b/t/t0012-help.sh @@ -0,0 +1,52 @@ +#!/bin/sh + +test_description='help' + +. ./test-lib.sh + +configure_help () { + test_config help.format html && + + # Unless the path has "://" in it, Git tries to make sure + # the documentation directory locally exists. Avoid it as + # we are only interested in seeing an attempt to correctly + # invoke a help browser in this test. + test_config help.htmlpath test://html && + + # Name a custom browser + test_config browser.test.cmd ./test-browser && + test_config help.browser test +} + +test_expect_success "setup" ' + # Just write out which page gets requested + write_script test-browser <<-\EOF + echo "$*" >test-browser.log + EOF +' + +test_expect_success "works for commands and guides by default" ' + configure_help && + git help status && + echo "test://html/git-status.html" >expect && + test_cmp expect test-browser.log && + git help revisions && + echo "test://html/gitrevisions.html" >expect && + test_cmp expect test-browser.log +' + +test_expect_success "--exclude-guides does not work for guides" ' + >test-browser.log && + test_must_fail git help --exclude-guides revisions && + test_must_be_empty test-browser.log +' + +test_expect_success "--help does not work for guides" " + cat <<-EOF >expect && + git: 'revisions' is not a git command. See 'git --help'. + EOF + test_must_fail git revisions --help 2>actual && + test_i18ncmp expect actual +" + +test_done diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index f94120a894..71350e0657 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -83,7 +83,11 @@ test_expect_success 'safecrlf: print warning only once' ' git add doublewarn && git commit -m "nowarn" && for w in Oh here is CRLFQ in text; do echo $w; done | q_to_cr >doublewarn && - test $(git add doublewarn 2>&1 | grep "CRLF will be replaced by LF" | wc -l) = 1 + git add doublewarn 2>err && + if test_have_prereq C_LOCALE_OUTPUT + then + test $(grep "CRLF will be replaced by LF" err | wc -l) = 1 + fi ' diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index 718efa04d3..161f560446 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -4,13 +4,72 @@ test_description='blob conversion via gitattributes' . ./test-lib.sh -cat <<EOF >rot13.sh -#!$SHELL_PATH +TEST_ROOT="$PWD" +PATH=$TEST_ROOT:$PATH + +write_script <<\EOF "$TEST_ROOT/rot13.sh" tr \ 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ' \ 'nopqrstuvwxyzabcdefghijklmNOPQRSTUVWXYZABCDEFGHIJKLM' EOF -chmod +x rot13.sh + +write_script rot13-filter.pl "$PERL_PATH" \ + <"$TEST_DIRECTORY"/t0021/rot13-filter.pl + +generate_random_characters () { + LEN=$1 + NAME=$2 + test-genrandom some-seed $LEN | + perl -pe "s/./chr((ord($&) % 26) + ord('a'))/sge" >"$TEST_ROOT/$NAME" +} + +file_size () { + perl -e 'print -s $ARGV[0]' "$1" +} + +filter_git () { + rm -f rot13-filter.log && + git "$@" +} + +# Compare two files and ensure that `clean` and `smudge` respectively are +# called at least once if specified in the `expect` file. The actual +# invocation count is not relevant because their number can vary. +# c.f. http://public-inbox.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ +test_cmp_count () { + expect=$1 + actual=$2 + for FILE in "$expect" "$actual" + do + sort "$FILE" | uniq -c | + sed -e "s/^ *[0-9][0-9]*[ ]*IN: /x IN: /" >"$FILE.tmp" && + mv "$FILE.tmp" "$FILE" || return + done && + test_cmp "$expect" "$actual" +} + +# Compare two files but exclude all `clean` invocations because Git can +# call `clean` zero or more times. +# c.f. http://public-inbox.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ +test_cmp_exclude_clean () { + expect=$1 + actual=$2 + for FILE in "$expect" "$actual" + do + grep -v "IN: clean" "$FILE" >"$FILE.tmp" && + mv "$FILE.tmp" "$FILE" + done && + test_cmp "$expect" "$actual" +} + +# Check that the contents of two files are equal and that their rot13 version +# is equal to the committed content. +test_cmp_committed_rot13 () { + test_cmp "$1" "$2" && + rot13.sh <"$1" >expected && + git cat-file blob :"$2" >actual && + test_cmp expected actual +} test_expect_success setup ' git config filter.rot13.smudge ./rot13.sh && @@ -31,15 +90,18 @@ test_expect_success setup ' cat test >test.i && git add test test.t test.i && rm -f test test.t test.i && - git checkout -- test test.t test.i + git checkout -- test test.t test.i && + + echo "content-test2" >test2.o && + echo "content-test3 - filename with special characters" >"test3 '\''sq'\'',\$x=.o" ' script='s/^\$Id: \([0-9a-f]*\) \$/\1/p' test_expect_success check ' - cmp test.o test && - cmp test.o test.t && + test_cmp test.o test && + test_cmp test.o test.t && # ident should be stripped in the repository git diff --raw --exit-code :test :test.i && @@ -47,10 +109,10 @@ test_expect_success check ' embedded=$(sed -ne "$script" test.i) && test "z$id" = "z$embedded" && - git cat-file blob :test.t > test.r && + git cat-file blob :test.t >test.r && - ./rot13.sh < test.o > test.t && - cmp test.r test.t + ./rot13.sh <test.o >test.t && + test_cmp test.r test.t ' # If an expanded ident ever gets into the repository, we want to make sure that @@ -130,7 +192,7 @@ test_expect_success 'filter shell-escaped filenames' ' # delete the files and check them out again, using a smudge filter # that will count the args and echo the command-line back to us - git config filter.argc.smudge "sh ./argc.sh %f" && + test_config filter.argc.smudge "sh ./argc.sh %f" && rm "$normal" "$special" && git checkout -- "$normal" "$special" && @@ -141,7 +203,7 @@ test_expect_success 'filter shell-escaped filenames' ' test_cmp expect "$special" && # do the same thing, but with more args in the filter expression - git config filter.argc.smudge "sh ./argc.sh %f --my-extra-arg" && + test_config filter.argc.smudge "sh ./argc.sh %f --my-extra-arg" && rm "$normal" "$special" && git checkout -- "$normal" "$special" && @@ -154,9 +216,9 @@ test_expect_success 'filter shell-escaped filenames' ' ' test_expect_success 'required filter should filter data' ' - git config filter.required.smudge ./rot13.sh && - git config filter.required.clean ./rot13.sh && - git config filter.required.required true && + test_config filter.required.smudge ./rot13.sh && + test_config filter.required.clean ./rot13.sh && + test_config filter.required.required true && echo "*.r filter=required" >.gitattributes && @@ -165,17 +227,17 @@ test_expect_success 'required filter should filter data' ' rm -f test.r && git checkout -- test.r && - cmp test.o test.r && + test_cmp test.o test.r && ./rot13.sh <test.o >expected && git cat-file blob :test.r >actual && - cmp expected actual + test_cmp expected actual ' test_expect_success 'required filter smudge failure' ' - git config filter.failsmudge.smudge false && - git config filter.failsmudge.clean cat && - git config filter.failsmudge.required true && + test_config filter.failsmudge.smudge false && + test_config filter.failsmudge.clean cat && + test_config filter.failsmudge.required true && echo "*.fs filter=failsmudge" >.gitattributes && @@ -186,9 +248,9 @@ test_expect_success 'required filter smudge failure' ' ' test_expect_success 'required filter clean failure' ' - git config filter.failclean.smudge cat && - git config filter.failclean.clean false && - git config filter.failclean.required true && + test_config filter.failclean.smudge cat && + test_config filter.failclean.clean false && + test_config filter.failclean.required true && echo "*.fc filter=failclean" >.gitattributes && @@ -197,8 +259,8 @@ test_expect_success 'required filter clean failure' ' ' test_expect_success 'filtering large input to small output should use little memory' ' - git config filter.devnull.clean "cat >/dev/null" && - git config filter.devnull.required true && + test_config filter.devnull.clean "cat >/dev/null" && + test_config filter.devnull.required true && for i in $(test_seq 1 30); do printf "%1048576d" 1; done >30MB && echo "30MB filter=devnull" >.gitattributes && GIT_MMAP_LIMIT=1m GIT_ALLOC_LIMIT=1m git add 30MB @@ -207,7 +269,7 @@ test_expect_success 'filtering large input to small output should use little mem test_expect_success 'filter that does not read is fine' ' test-genrandom foo $((128 * 1024 + 1)) >big && echo "big filter=epipe" >.gitattributes && - git config filter.epipe.clean "echo xyzzy" && + test_config filter.epipe.clean "echo xyzzy" && git add big && git cat-file blob :big >actual && echo xyzzy >expect && @@ -215,20 +277,20 @@ test_expect_success 'filter that does not read is fine' ' ' test_expect_success EXPENSIVE 'filter large file' ' - git config filter.largefile.smudge cat && - git config filter.largefile.clean cat && + test_config filter.largefile.smudge cat && + test_config filter.largefile.clean cat && for i in $(test_seq 1 2048); do printf "%1048576d" 1; done >2GB && echo "2GB filter=largefile" >.gitattributes && git add 2GB 2>err && - ! test -s err && + test_must_be_empty err && rm -f 2GB && git checkout -- 2GB 2>err && - ! test -s err + test_must_be_empty err ' test_expect_success "filter: clean empty file" ' - git config filter.in-repo-header.clean "echo cleaned && cat" && - git config filter.in-repo-header.smudge "sed 1d" && + test_config filter.in-repo-header.clean "echo cleaned && cat" && + test_config filter.in-repo-header.smudge "sed 1d" && echo "empty-in-worktree filter=in-repo-header" >>.gitattributes && >empty-in-worktree && @@ -240,8 +302,8 @@ test_expect_success "filter: clean empty file" ' ' test_expect_success "filter: smudge empty file" ' - git config filter.empty-in-repo.clean "cat >/dev/null" && - git config filter.empty-in-repo.smudge "echo smudged && cat" && + test_config filter.empty-in-repo.clean "cat >/dev/null" && + test_config filter.empty-in-repo.smudge "echo smudged && cat" && echo "empty-in-repo filter=empty-in-repo" >>.gitattributes && echo dead data walking >empty-in-repo && @@ -252,4 +314,391 @@ test_expect_success "filter: smudge empty file" ' test_cmp expected filtered-empty-in-repo ' +test_expect_success 'disable filter with empty override' ' + test_config_global filter.disable.smudge false && + test_config_global filter.disable.clean false && + test_config filter.disable.smudge false && + test_config filter.disable.clean false && + + echo "*.disable filter=disable" >.gitattributes && + + echo test >test.disable && + git -c filter.disable.clean= add test.disable 2>err && + test_must_be_empty err && + rm -f test.disable && + git -c filter.disable.smudge= checkout -- test.disable 2>err && + test_must_be_empty err +' + +test_expect_success 'diff does not reuse worktree files that need cleaning' ' + test_config filter.counter.clean "echo . >>count; sed s/^/clean:/" && + echo "file filter=counter" >.gitattributes && + test_commit one file && + test_commit two file && + + >count && + git diff-tree -p HEAD && + test_line_count = 0 count +' + +test_expect_success PERL 'required process filter should filter data' ' + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && + test_config_global filter.protocol.required true && + rm -rf repo && + mkdir repo && + ( + cd repo && + git init && + + echo "*.r filter=protocol" >.gitattributes && + git add . && + git commit -m "test commit 1" && + git branch empty-branch && + + cp "$TEST_ROOT/test.o" test.r && + cp "$TEST_ROOT/test2.o" test2.r && + mkdir testsubdir && + cp "$TEST_ROOT/test3 '\''sq'\'',\$x=.o" "testsubdir/test3 '\''sq'\'',\$x=.r" && + >test4-empty.r && + + S=$(file_size test.r) && + S2=$(file_size test2.r) && + S3=$(file_size "testsubdir/test3 '\''sq'\'',\$x=.r") && + + filter_git add . && + cat >expected.log <<-EOF && + START + init handshake complete + IN: clean test.r $S [OK] -- OUT: $S . [OK] + IN: clean test2.r $S2 [OK] -- OUT: $S2 . [OK] + IN: clean test4-empty.r 0 [OK] -- OUT: 0 [OK] + IN: clean testsubdir/test3 '\''sq'\'',\$x=.r $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_count expected.log rot13-filter.log && + + git commit -m "test commit 2" && + rm -f test2.r "testsubdir/test3 '\''sq'\'',\$x=.r" && + + filter_git checkout --quiet --no-progress . && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log rot13-filter.log && + + filter_git checkout --quiet --no-progress empty-branch && + cat >expected.log <<-EOF && + START + init handshake complete + IN: clean test.r $S [OK] -- OUT: $S . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log rot13-filter.log && + + filter_git checkout --quiet --no-progress master && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r 0 [OK] -- OUT: 0 [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log rot13-filter.log && + + test_cmp_committed_rot13 "$TEST_ROOT/test.o" test.r && + test_cmp_committed_rot13 "$TEST_ROOT/test2.o" test2.r && + test_cmp_committed_rot13 "$TEST_ROOT/test3 '\''sq'\'',\$x=.o" "testsubdir/test3 '\''sq'\'',\$x=.r" + ) +' + +test_expect_success PERL 'required process filter takes precedence' ' + test_config_global filter.protocol.clean false && + test_config_global filter.protocol.process "rot13-filter.pl clean" && + test_config_global filter.protocol.required true && + rm -rf repo && + mkdir repo && + ( + cd repo && + git init && + + echo "*.r filter=protocol" >.gitattributes && + cp "$TEST_ROOT/test.o" test.r && + S=$(file_size test.r) && + + # Check that the process filter is invoked here + filter_git add . && + cat >expected.log <<-EOF && + START + init handshake complete + IN: clean test.r $S [OK] -- OUT: $S . [OK] + STOP + EOF + test_cmp_count expected.log rot13-filter.log + ) +' + +test_expect_success PERL 'required process filter should be used only for "clean" operation only' ' + test_config_global filter.protocol.process "rot13-filter.pl clean" && + rm -rf repo && + mkdir repo && + ( + cd repo && + git init && + + echo "*.r filter=protocol" >.gitattributes && + cp "$TEST_ROOT/test.o" test.r && + S=$(file_size test.r) && + + filter_git add . && + cat >expected.log <<-EOF && + START + init handshake complete + IN: clean test.r $S [OK] -- OUT: $S . [OK] + STOP + EOF + test_cmp_count expected.log rot13-filter.log && + + rm test.r && + + filter_git checkout --quiet --no-progress . && + # If the filter would be used for "smudge", too, we would see + # "IN: smudge test.r 57 [OK] -- OUT: 57 . [OK]" here + cat >expected.log <<-EOF && + START + init handshake complete + STOP + EOF + test_cmp_exclude_clean expected.log rot13-filter.log + ) +' + +test_expect_success PERL 'required process filter should process multiple packets' ' + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && + test_config_global filter.protocol.required true && + + rm -rf repo && + mkdir repo && + ( + cd repo && + git init && + + # Generate data requiring 1, 2, 3 packets + S=65516 && # PKTLINE_DATA_MAXLEN -> Maximal size of a packet + generate_random_characters $(($S )) 1pkt_1__.file && + generate_random_characters $(($S +1)) 2pkt_1+1.file && + generate_random_characters $(($S*2-1)) 2pkt_2-1.file && + generate_random_characters $(($S*2 )) 2pkt_2__.file && + generate_random_characters $(($S*2+1)) 3pkt_2+1.file && + + for FILE in "$TEST_ROOT"/*.file + do + cp "$FILE" . && + rot13.sh <"$FILE" >"$FILE.rot13" + done && + + echo "*.file filter=protocol" >.gitattributes && + filter_git add *.file .gitattributes && + cat >expected.log <<-EOF && + START + init handshake complete + IN: clean 1pkt_1__.file $(($S )) [OK] -- OUT: $(($S )) . [OK] + IN: clean 2pkt_1+1.file $(($S +1)) [OK] -- OUT: $(($S +1)) .. [OK] + IN: clean 2pkt_2-1.file $(($S*2-1)) [OK] -- OUT: $(($S*2-1)) .. [OK] + IN: clean 2pkt_2__.file $(($S*2 )) [OK] -- OUT: $(($S*2 )) .. [OK] + IN: clean 3pkt_2+1.file $(($S*2+1)) [OK] -- OUT: $(($S*2+1)) ... [OK] + STOP + EOF + test_cmp_count expected.log rot13-filter.log && + + rm -f *.file && + + filter_git checkout --quiet --no-progress -- *.file && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge 1pkt_1__.file $(($S )) [OK] -- OUT: $(($S )) . [OK] + IN: smudge 2pkt_1+1.file $(($S +1)) [OK] -- OUT: $(($S +1)) .. [OK] + IN: smudge 2pkt_2-1.file $(($S*2-1)) [OK] -- OUT: $(($S*2-1)) .. [OK] + IN: smudge 2pkt_2__.file $(($S*2 )) [OK] -- OUT: $(($S*2 )) .. [OK] + IN: smudge 3pkt_2+1.file $(($S*2+1)) [OK] -- OUT: $(($S*2+1)) ... [OK] + STOP + EOF + test_cmp_exclude_clean expected.log rot13-filter.log && + + for FILE in *.file + do + test_cmp_committed_rot13 "$TEST_ROOT/$FILE" $FILE + done + ) +' + +test_expect_success PERL 'required process filter with clean error should fail' ' + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && + test_config_global filter.protocol.required true && + rm -rf repo && + mkdir repo && + ( + cd repo && + git init && + + echo "*.r filter=protocol" >.gitattributes && + + cp "$TEST_ROOT/test.o" test.r && + echo "this is going to fail" >clean-write-fail.r && + echo "content-test3-subdir" >test3.r && + + test_must_fail git add . + ) +' + +test_expect_success PERL 'process filter should restart after unexpected write failure' ' + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && + rm -rf repo && + mkdir repo && + ( + cd repo && + git init && + + echo "*.r filter=protocol" >.gitattributes && + + cp "$TEST_ROOT/test.o" test.r && + cp "$TEST_ROOT/test2.o" test2.r && + echo "this is going to fail" >smudge-write-fail.o && + cp smudge-write-fail.o smudge-write-fail.r && + + S=$(file_size test.r) && + S2=$(file_size test2.r) && + SF=$(file_size smudge-write-fail.r) && + + git add . && + rm -f *.r && + + rm -f rot13-filter.log && + git checkout --quiet --no-progress . 2>git-stderr.log && + + grep "smudge write error at" git-stderr.log && + grep "error: external filter" git-stderr.log && + + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge smudge-write-fail.r $SF [OK] -- OUT: $SF [WRITE FAIL] + START + init handshake complete + IN: smudge test.r $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log rot13-filter.log && + + test_cmp_committed_rot13 "$TEST_ROOT/test.o" test.r && + test_cmp_committed_rot13 "$TEST_ROOT/test2.o" test2.r && + + # Smudge failed + ! test_cmp smudge-write-fail.o smudge-write-fail.r && + rot13.sh <smudge-write-fail.o >expected && + git cat-file blob :smudge-write-fail.r >actual && + test_cmp expected actual + ) +' + +test_expect_success PERL 'process filter should not be restarted if it signals an error' ' + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && + rm -rf repo && + mkdir repo && + ( + cd repo && + git init && + + echo "*.r filter=protocol" >.gitattributes && + + cp "$TEST_ROOT/test.o" test.r && + cp "$TEST_ROOT/test2.o" test2.r && + echo "this will cause an error" >error.o && + cp error.o error.r && + + S=$(file_size test.r) && + S2=$(file_size test2.r) && + SE=$(file_size error.r) && + + git add . && + rm -f *.r && + + filter_git checkout --quiet --no-progress . && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge error.r $SE [OK] -- OUT: 0 [ERROR] + IN: smudge test.r $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log rot13-filter.log && + + test_cmp_committed_rot13 "$TEST_ROOT/test.o" test.r && + test_cmp_committed_rot13 "$TEST_ROOT/test2.o" test2.r && + test_cmp error.o error.r + ) +' + +test_expect_success PERL 'process filter abort stops processing of all further files' ' + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && + rm -rf repo && + mkdir repo && + ( + cd repo && + git init && + + echo "*.r filter=protocol" >.gitattributes && + + cp "$TEST_ROOT/test.o" test.r && + cp "$TEST_ROOT/test2.o" test2.r && + echo "error this blob and all future blobs" >abort.o && + cp abort.o abort.r && + + SA=$(file_size abort.r) && + + git add . && + rm -f *.r && + + # Note: This test assumes that Git filters files in alphabetical + # order ("abort.r" before "test.r"). + filter_git checkout --quiet --no-progress . && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge abort.r $SA [OK] -- OUT: 0 [ABORT] + STOP + EOF + test_cmp_exclude_clean expected.log rot13-filter.log && + + test_cmp "$TEST_ROOT/test.o" test.r && + test_cmp "$TEST_ROOT/test2.o" test2.r && + test_cmp abort.o abort.r + ) +' + +test_expect_success PERL 'invalid process filter must fail (and not hang!)' ' + test_config_global filter.protocol.process cat && + test_config_global filter.protocol.required true && + rm -rf repo && + mkdir repo && + ( + cd repo && + git init && + + echo "*.r filter=protocol" >.gitattributes && + + cp "$TEST_ROOT/test.o" test.r && + test_must_fail git add . 2>git-stderr.log && + grep "does not support filter protocol version" git-stderr.log + ) +' + test_done diff --git a/t/t0021/rot13-filter.pl b/t/t0021/rot13-filter.pl new file mode 100644 index 0000000000..617f581e56 --- /dev/null +++ b/t/t0021/rot13-filter.pl @@ -0,0 +1,196 @@ +# +# Example implementation for the Git filter protocol version 2 +# See Documentation/gitattributes.txt, section "Filter Protocol" +# +# The script takes the list of supported protocol capabilities as +# arguments ("clean", "smudge", etc). +# +# This implementation supports special test cases: +# (1) If data with the pathname "clean-write-fail.r" is processed with +# a "clean" operation then the write operation will die. +# (2) If data with the pathname "smudge-write-fail.r" is processed with +# a "smudge" operation then the write operation will die. +# (3) If data with the pathname "error.r" is processed with any +# operation then the filter signals that it cannot or does not want +# to process the file. +# (4) If data with the pathname "abort.r" is processed with any +# operation then the filter signals that it cannot or does not want +# to process the file and any file after that is processed with the +# same command. +# + +use strict; +use warnings; +use IO::File; + +my $MAX_PACKET_CONTENT_SIZE = 65516; +my @capabilities = @ARGV; + +open my $debug, ">>", "rot13-filter.log" or die "cannot open log file: $!"; + +sub rot13 { + my $str = shift; + $str =~ y/A-Za-z/N-ZA-Mn-za-m/; + return $str; +} + +sub packet_bin_read { + my $buffer; + my $bytes_read = read STDIN, $buffer, 4; + if ( $bytes_read == 0 ) { + # EOF - Git stopped talking to us! + print $debug "STOP\n"; + exit(); + } + elsif ( $bytes_read != 4 ) { + die "invalid packet: '$buffer'"; + } + my $pkt_size = hex($buffer); + if ( $pkt_size == 0 ) { + return ( 1, "" ); + } + elsif ( $pkt_size > 4 ) { + my $content_size = $pkt_size - 4; + $bytes_read = read STDIN, $buffer, $content_size; + if ( $bytes_read != $content_size ) { + die "invalid packet ($content_size bytes expected; $bytes_read bytes read)"; + } + return ( 0, $buffer ); + } + else { + die "invalid packet size: $pkt_size"; + } +} + +sub packet_txt_read { + my ( $res, $buf ) = packet_bin_read(); + unless ( $buf =~ s/\n$// ) { + die "A non-binary line MUST be terminated by an LF."; + } + return ( $res, $buf ); +} + +sub packet_bin_write { + my $buf = shift; + print STDOUT sprintf( "%04x", length($buf) + 4 ); + print STDOUT $buf; + STDOUT->flush(); +} + +sub packet_txt_write { + packet_bin_write( $_[0] . "\n" ); +} + +sub packet_flush { + print STDOUT sprintf( "%04x", 0 ); + STDOUT->flush(); +} + +print $debug "START\n"; +$debug->flush(); + +( packet_txt_read() eq ( 0, "git-filter-client" ) ) || die "bad initialize"; +( packet_txt_read() eq ( 0, "version=2" ) ) || die "bad version"; +( packet_bin_read() eq ( 1, "" ) ) || die "bad version end"; + +packet_txt_write("git-filter-server"); +packet_txt_write("version=2"); +packet_flush(); + +( packet_txt_read() eq ( 0, "capability=clean" ) ) || die "bad capability"; +( packet_txt_read() eq ( 0, "capability=smudge" ) ) || die "bad capability"; +( packet_bin_read() eq ( 1, "" ) ) || die "bad capability end"; + +foreach (@capabilities) { + packet_txt_write( "capability=" . $_ ); +} +packet_flush(); +print $debug "init handshake complete\n"; +$debug->flush(); + +while (1) { + my ($command) = packet_txt_read() =~ /^command=(.+)$/; + print $debug "IN: $command"; + $debug->flush(); + + my ($pathname) = packet_txt_read() =~ /^pathname=(.+)$/; + print $debug " $pathname"; + $debug->flush(); + + if ( $pathname eq "" ) { + die "bad pathname '$pathname'"; + } + + # Flush + packet_bin_read(); + + my $input = ""; + { + binmode(STDIN); + my $buffer; + my $done = 0; + while ( !$done ) { + ( $done, $buffer ) = packet_bin_read(); + $input .= $buffer; + } + print $debug " " . length($input) . " [OK] -- "; + $debug->flush(); + } + + my $output; + if ( $pathname eq "error.r" or $pathname eq "abort.r" ) { + $output = ""; + } + elsif ( $command eq "clean" and grep( /^clean$/, @capabilities ) ) { + $output = rot13($input); + } + elsif ( $command eq "smudge" and grep( /^smudge$/, @capabilities ) ) { + $output = rot13($input); + } + else { + die "bad command '$command'"; + } + + print $debug "OUT: " . length($output) . " "; + $debug->flush(); + + if ( $pathname eq "error.r" ) { + print $debug "[ERROR]\n"; + $debug->flush(); + packet_txt_write("status=error"); + packet_flush(); + } + elsif ( $pathname eq "abort.r" ) { + print $debug "[ABORT]\n"; + $debug->flush(); + packet_txt_write("status=abort"); + packet_flush(); + } + else { + packet_txt_write("status=success"); + packet_flush(); + + if ( $pathname eq "${command}-write-fail.r" ) { + print $debug "[WRITE FAIL]\n"; + $debug->flush(); + die "${command} write error"; + } + + while ( length($output) > 0 ) { + my $packet = substr( $output, 0, $MAX_PACKET_CONTENT_SIZE ); + packet_bin_write($packet); + # dots represent the number of packets + print $debug "."; + if ( length($output) > $MAX_PACKET_CONTENT_SIZE ) { + $output = substr( $output, $MAX_PACKET_CONTENT_SIZE ); + } + else { + $output = ""; + } + } + packet_flush(); + print $debug " [OK]\n"; + $debug->flush(); + packet_flush(); + } +} diff --git a/t/t0025-crlf-auto.sh b/t/t0025-crlf-auto.sh index c164b4662a..d0bee08b2e 100755 --- a/t/t0025-crlf-auto.sh +++ b/t/t0025-crlf-auto.sh @@ -114,7 +114,7 @@ test_expect_success 'autocrlf=true does not normalize CRLF files' ' test -z "$LFonlydiff" -a -z "$CRLFonlydiff" -a -z "$LFwithNULdiff" ' -test_expect_success 'text=auto, autocrlf=true _does_ normalize CRLF files' ' +test_expect_success 'text=auto, autocrlf=true does not normalize CRLF files' ' rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf true && @@ -126,7 +126,7 @@ test_expect_success 'text=auto, autocrlf=true _does_ normalize CRLF files' ' LFonlydiff=$(git diff LFonly) && CRLFonlydiff=$(git diff CRLFonly) && LFwithNULdiff=$(git diff LFwithNUL) && - test -z "$LFonlydiff" -a -n "$CRLFonlydiff" -a -z "$LFwithNULdiff" + test -z "$LFonlydiff" -a -z "$CRLFonlydiff" -a -z "$LFwithNULdiff" ' test_expect_success 'text=auto, autocrlf=true does not normalize binary files' ' diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh index 1a56e5e82e..90db54c9f9 100755 --- a/t/t0027-auto-crlf.sh +++ b/t/t0027-auto-crlf.sh @@ -12,7 +12,7 @@ fi compare_files () { tr '\015\000' QN <"$1" >"$1".expect && - tr '\015\000' QN <"$2" >"$2".actual && + tr '\015\000' QN <"$2" | tr -d 'Z' >"$2".actual && test_cmp "$1".expect "$2".actual && rm "$1".expect "$2".actual } @@ -21,38 +21,50 @@ compare_ws_file () { pfx=$1 exp=$2.expect act=$pfx.actual.$3 - tr '\015\000' QN <"$2" >"$exp" && - tr '\015\000' QN <"$3" >"$act" && - test_cmp $exp $act && - rm $exp $act + tr '\015\000abcdef0123456789' QN00000000000000000 <"$2" >"$exp" && + tr '\015\000abcdef0123456789' QN00000000000000000 <"$3" >"$act" && + test_cmp "$exp" "$act" && + rm "$exp" "$act" } create_gitattributes () { - attr=$1 - case "$attr" in - auto) - echo "*.txt text=auto" >.gitattributes - ;; - text) - echo "*.txt text" >.gitattributes - ;; - -text) - echo "*.txt -text" >.gitattributes - ;; - crlf) - echo "*.txt eol=crlf" >.gitattributes - ;; - lf) - echo "*.txt eol=lf" >.gitattributes - ;; - "") - echo >.gitattributes - ;; - *) - echo >&2 invalid attribute: $attr - exit 1 - ;; - esac + { + while test "$#" != 0 + do + case "$1" in + auto) echo '*.txt text=auto' ;; + ident) echo '*.txt ident' ;; + text) echo '*.txt text' ;; + -text) echo '*.txt -text' ;; + crlf) echo '*.txt eol=crlf' ;; + lf) echo '*.txt eol=lf' ;; + "") ;; + *) + echo >&2 invalid attribute: "$1" + exit 1 + ;; + esac && + shift + done + } >.gitattributes +} + +create_NNO_files () { + for crlf in false true input + do + for attr in "" auto text -text + do + for aeol in "" lf crlf + do + pfx=NNO_attr_${attr}_aeol_${aeol}_${crlf} + cp CRLF_mix_LF ${pfx}_LF.txt && + cp CRLF_mix_LF ${pfx}_CRLF.txt && + cp CRLF_mix_LF ${pfx}_CRLF_mix_LF.txt && + cp CRLF_mix_LF ${pfx}_LF_mix_CR.txt && + cp CRLF_mix_LF ${pfx}_CRLF_nul.txt + done + done + done } check_warning () { @@ -62,7 +74,7 @@ check_warning () { '') >"$2".expect ;; *) echo >&2 "Illegal 1": "$1" ; return false ;; esac - grep "will be replaced by" "$2" | sed -e "s/\(.*\) in [^ ]*$/\1/" >"$2".actual + grep "will be replaced by" "$2" | sed -e "s/\(.*\) in [^ ]*$/\1/" | uniq >"$2".actual test_cmp "$2".expect "$2".actual } @@ -71,21 +83,12 @@ commit_check_warn () { attr=$2 lfname=$3 crlfname=$4 - repoMIX=$5 - lfmixcrlf=$6 - lfmixcr=$7 - crlfnul=$8 + lfmixcrlf=$5 + lfmixcr=$6 + crlfnul=$7 pfx=crlf_${crlf}_attr_${attr} - # Special handling for repoMIX: It should already be in the repo - # with CRLF - f=repoMIX - fname=${pfx}_$f.txt - echo >.gitattributes && - cp $f $fname && - git -c core.autocrlf=false add $fname 2>"${pfx}_$f.err" && - git commit -m "repoMIX" && create_gitattributes "$attr" && - for f in LF CRLF repoMIX LF_mix_CR CRLF_mix_LF LF_nul CRLF_nul + for f in LF CRLF LF_mix_CR CRLF_mix_LF LF_nul CRLF_nul do fname=${pfx}_$f.txt && cp $f $fname && @@ -99,6 +102,87 @@ commit_check_warn () { check_warning "$crlfnul" ${pfx}_CRLF_nul.err } +commit_chk_wrnNNO () { + attr=$1 ; shift + aeol=$1 ; shift + crlf=$1 ; shift + lfwarn=$1 ; shift + crlfwarn=$1 ; shift + lfmixcrlf=$1 ; shift + lfmixcr=$1 ; shift + crlfnul=$1 ; shift + pfx=NNO_attr_${attr}_aeol_${aeol}_${crlf} + #Commit files on top of existing file + create_gitattributes "$attr" $aeol && + for f in LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + do + fname=${pfx}_$f.txt && + cp $f $fname && + printf Z >>"$fname" && + git -c core.autocrlf=$crlf add $fname 2>"${pfx}_$f.err" + done + + test_expect_success "commit NNO files crlf=$crlf attr=$attr LF" ' + check_warning "$lfwarn" ${pfx}_LF.err + ' + test_expect_success "commit NNO files attr=$attr aeol=$aeol crlf=$crlf CRLF" ' + check_warning "$crlfwarn" ${pfx}_CRLF.err + ' + + test_expect_success "commit NNO files attr=$attr aeol=$aeol crlf=$crlf CRLF_mix_LF" ' + check_warning "$lfmixcrlf" ${pfx}_CRLF_mix_LF.err + ' + + test_expect_success "commit NNO files attr=$attr aeol=$aeol crlf=$crlf LF_mix_cr" ' + check_warning "$lfmixcr" ${pfx}_LF_mix_CR.err + ' + + test_expect_success "commit NNO files attr=$attr aeol=$aeol crlf=$crlf CRLF_nul" ' + check_warning "$crlfnul" ${pfx}_CRLF_nul.err + ' +} + +stats_ascii () { + case "$1" in + LF) + echo lf + ;; + CRLF) + echo crlf + ;; + CRLF_mix_LF) + echo mixed + ;; + LF_mix_CR|CRLF_nul|LF_nul|CRLF_mix_CR) + echo "-text" + ;; + *) + echo error_invalid $1 + ;; + esac + +} + + +# contruct the attr/ returned by git ls-files --eol +# Take none (=empty), one or two args +# convert.c: eol=XX overrides text=auto +attr_ascii () { + case $1,$2 in + -text,*) echo "-text" ;; + text,) echo "text" ;; + text,lf) echo "text eol=lf" ;; + text,crlf) echo "text eol=crlf" ;; + auto,) echo "text=auto" ;; + auto,lf) echo "text=auto eol=lf" ;; + auto,crlf) echo "text=auto eol=crlf" ;; + lf,) echo "text eol=lf" ;; + crlf,) echo "text eol=crlf" ;; + ,) echo "" ;; + *) echo invalid_attr "$1,$2" ;; + esac +} + check_files_in_repo () { crlf=$1 attr=$2 @@ -115,61 +199,140 @@ check_files_in_repo () { compare_files $crlfnul ${pfx}CRLF_nul.txt } +check_in_repo_NNO () { + attr=$1 ; shift + aeol=$1 ; shift + crlf=$1 ; shift + lfname=$1 ; shift + crlfname=$1 ; shift + lfmixcrlf=$1 ; shift + lfmixcr=$1 ; shift + crlfnul=$1 ; shift + pfx=NNO_attr_${attr}_aeol_${aeol}_${crlf} + test_expect_success "compare_files $lfname ${pfx}_LF.txt" ' + compare_files $lfname ${pfx}_LF.txt + ' + test_expect_success "compare_files $crlfname ${pfx}_CRLF.txt" ' + compare_files $crlfname ${pfx}_CRLF.txt + ' + test_expect_success "compare_files $lfmixcrlf ${pfx}_CRLF_mix_LF.txt" ' + compare_files $lfmixcrlf ${pfx}_CRLF_mix_LF.txt + ' + test_expect_success "compare_files $lfmixcr ${pfx}_LF_mix_CR.txt" ' + compare_files $lfmixcr ${pfx}_LF_mix_CR.txt + ' + test_expect_success "compare_files $crlfnul ${pfx}_CRLF_nul.txt" ' + compare_files $crlfnul ${pfx}_CRLF_nul.txt + ' +} checkout_files () { - eol=$1 - crlf=$2 - attr=$3 - lfname=$4 - crlfname=$5 - lfmixcrlf=$6 - lfmixcr=$7 - crlfnul=$8 - create_gitattributes $attr && + attr=$1 ; shift + ident=$1; shift + aeol=$1 ; shift + crlf=$1 ; shift + ceol=$1 ; shift + lfname=$1 ; shift + crlfname=$1 ; shift + lfmixcrlf=$1 ; shift + lfmixcr=$1 ; shift + crlfnul=$1 ; shift + create_gitattributes "$attr" $ident $aeol && git config core.autocrlf $crlf && - pfx=eol_${eol}_crlf_${crlf}_attr_${attr}_ && - src=crlf_false_attr__ && + pfx=eol_${ceol}_crlf_${crlf}_attr_${attr}_ && for f in LF CRLF LF_mix_CR CRLF_mix_LF LF_nul do - rm $src$f.txt && - if test -z "$eol"; then - git checkout $src$f.txt + rm crlf_false_attr__$f.txt && + if test -z "$ceol"; then + git checkout crlf_false_attr__$f.txt else - git -c core.eol=$eol checkout $src$f.txt + git -c core.eol=$ceol checkout crlf_false_attr__$f.txt fi done - test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=LF" " - compare_ws_file $pfx $lfname ${src}LF.txt + test_expect_success "ls-files --eol attr=$attr $ident aeol=$aeol core.autocrlf=$crlf core.eol=$ceol" ' + test_when_finished "rm expect actual" && + sort <<-EOF >expect && + i/crlf w/$(stats_ascii $crlfname) attr/$(attr_ascii $attr $aeol) crlf_false_attr__CRLF.txt + i/mixed w/$(stats_ascii $lfmixcrlf) attr/$(attr_ascii $attr $aeol) crlf_false_attr__CRLF_mix_LF.txt + i/lf w/$(stats_ascii $lfname) attr/$(attr_ascii $attr $aeol) crlf_false_attr__LF.txt + i/-text w/$(stats_ascii $lfmixcr) attr/$(attr_ascii $attr $aeol) crlf_false_attr__LF_mix_CR.txt + i/-text w/$(stats_ascii $crlfnul) attr/$(attr_ascii $attr $aeol) crlf_false_attr__CRLF_nul.txt + i/-text w/$(stats_ascii $crlfnul) attr/$(attr_ascii $attr $aeol) crlf_false_attr__LF_nul.txt + EOF + git ls-files --eol crlf_false_attr__* | + sed -e "s/ / /g" -e "s/ */ /g" | + sort >actual && + test_cmp expect actual + ' + test_expect_success "checkout attr=$attr $ident aeol=$aeol core.autocrlf=$crlf core.eol=$ceol file=LF" " + compare_ws_file $pfx $lfname crlf_false_attr__LF.txt " - test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=CRLF" " - compare_ws_file $pfx $crlfname ${src}CRLF.txt + test_expect_success "checkout attr=$attr $ident aeol=$aeol core.autocrlf=$crlf core.eol=$ceol file=CRLF" " + compare_ws_file $pfx $crlfname crlf_false_attr__CRLF.txt " - test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=CRLF_mix_LF" " - compare_ws_file $pfx $lfmixcrlf ${src}CRLF_mix_LF.txt + test_expect_success "checkout attr=$attr $ident aeol=$aeol core.autocrlf=$crlf core.eol=$ceol file=CRLF_mix_LF" " + compare_ws_file $pfx $lfmixcrlf crlf_false_attr__CRLF_mix_LF.txt " - test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=LF_mix_CR" " - compare_ws_file $pfx $lfmixcr ${src}LF_mix_CR.txt + test_expect_success "checkout attr=$attr $ident aeol=$aeol core.autocrlf=$crlf core.eol=$ceol file=LF_mix_CR" " + compare_ws_file $pfx $lfmixcr crlf_false_attr__LF_mix_CR.txt " - test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=LF_nul" " - compare_ws_file $pfx $crlfnul ${src}LF_nul.txt + test_expect_success "checkout attr=$attr $ident aeol=$aeol core.autocrlf=$crlf core.eol=$ceol file=LF_nul" " + compare_ws_file $pfx $crlfnul crlf_false_attr__LF_nul.txt " } -####### +# Test control characters +# NUL SOH CR EOF==^Z +test_expect_success 'ls-files --eol -o Text/Binary' ' + test_when_finished "rm expect actual TeBi_*" && + STRT=AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA && + STR=$STRT$STRT$STRT$STRT && + printf "${STR}BBB\001" >TeBi_127_S && + printf "${STR}BBBB\001">TeBi_128_S && + printf "${STR}BBB\032" >TeBi_127_E && + printf "\032${STR}BBB" >TeBi_E_127 && + printf "${STR}BBBB\000">TeBi_128_N && + printf "${STR}BBB\012">TeBi_128_L && + printf "${STR}BBB\015">TeBi_127_C && + printf "${STR}BB\015\012" >TeBi_126_CL && + printf "${STR}BB\015\012\015" >TeBi_126_CLC && + sort <<-\EOF >expect && + i/ w/-text TeBi_127_S + i/ w/none TeBi_128_S + i/ w/none TeBi_127_E + i/ w/-text TeBi_E_127 + i/ w/-text TeBi_128_N + i/ w/lf TeBi_128_L + i/ w/-text TeBi_127_C + i/ w/crlf TeBi_126_CL + i/ w/-text TeBi_126_CLC + EOF + git ls-files --eol -o | + sed -n -e "/TeBi_/{s!attr/[ ]*!!g + s! ! !g + s! *! !g + p + }" | sort >actual && + test_cmp expect actual +' + test_expect_success 'setup master' ' echo >.gitattributes && git checkout -b master && git add .gitattributes && git commit -m "add .gitattributes" "" && - printf "line1\nline2\nline3" >LF && - printf "line1\r\nline2\r\nline3" >CRLF && - printf "line1\r\nline2\nline3" >repoMIX && - printf "line1\r\nline2\nline3" >CRLF_mix_LF && - printf "line1\nline2\rline3" >LF_mix_CR && - printf "line1\r\nline2\rline3" >CRLF_mix_CR && - printf "line1Q\r\nline2\r\nline3" | q_to_nul >CRLF_nul && - printf "line1Q\nline2\nline3" | q_to_nul >LF_nul + printf "\$Id: 0000000000000000000000000000000000000000 \$\nLINEONE\nLINETWO\nLINETHREE" >LF && + printf "\$Id: 0000000000000000000000000000000000000000 \$\r\nLINEONE\r\nLINETWO\r\nLINETHREE" >CRLF && + printf "\$Id: 0000000000000000000000000000000000000000 \$\nLINEONE\r\nLINETWO\nLINETHREE" >CRLF_mix_LF && + printf "\$Id: 0000000000000000000000000000000000000000 \$\nLINEONE\nLINETWO\rLINETHREE" >LF_mix_CR && + printf "\$Id: 0000000000000000000000000000000000000000 \$\r\nLINEONE\r\nLINETWO\rLINETHREE" >CRLF_mix_CR && + printf "\$Id: 0000000000000000000000000000000000000000 \$\r\nLINEONEQ\r\nLINETWO\r\nLINETHREE" | q_to_nul >CRLF_nul && + printf "\$Id: 0000000000000000000000000000000000000000 \$\nLINEONEQ\nLINETWO\nLINETHREE" | q_to_nul >LF_nul && + create_NNO_files CRLF_mix_LF CRLF_mix_LF CRLF_mix_LF CRLF_mix_LF CRLF_mix_LF && + git -c core.autocrlf=false add NNO_*.txt && + git commit -m "mixed line endings" && + test_tick ' @@ -191,46 +354,72 @@ else WAMIX=CRLF_LF fi -# attr LF CRLF repoMIX CRLFmixLF LFmixCR CRLFNUL +# attr LF CRLF CRLFmixLF LFmixCR CRLFNUL test_expect_success 'commit files empty attr' ' - commit_check_warn false "" "" "" "" "" "" "" && - commit_check_warn true "" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" "" && - commit_check_warn input "" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "" + commit_check_warn false "" "" "" "" "" "" && + commit_check_warn true "" "LF_CRLF" "" "LF_CRLF" "" "" && + commit_check_warn input "" "" "CRLF_LF" "CRLF_LF" "" "" ' test_expect_success 'commit files attr=auto' ' - commit_check_warn false "auto" "$WILC" "$WICL" "$WAMIX" "$WAMIX" "" "" && - commit_check_warn true "auto" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" "" && - commit_check_warn input "auto" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "" + commit_check_warn false "auto" "$WILC" "$WICL" "$WAMIX" "" "" && + commit_check_warn true "auto" "LF_CRLF" "" "LF_CRLF" "" "" && + commit_check_warn input "auto" "" "CRLF_LF" "CRLF_LF" "" "" ' test_expect_success 'commit files attr=text' ' - commit_check_warn false "text" "$WILC" "$WICL" "$WAMIX" "$WAMIX" "$WILC" "$WICL" && - commit_check_warn true "text" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "LF_CRLF" "" && - commit_check_warn input "text" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" + commit_check_warn false "text" "$WILC" "$WICL" "$WAMIX" "$WILC" "$WICL" && + commit_check_warn true "text" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && + commit_check_warn input "text" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" ' test_expect_success 'commit files attr=-text' ' - commit_check_warn false "-text" "" "" "" "" "" "" && - commit_check_warn true "-text" "" "" "" "" "" "" && - commit_check_warn input "-text" "" "" "" "" "" "" + commit_check_warn false "-text" "" "" "" "" "" && + commit_check_warn true "-text" "" "" "" "" "" && + commit_check_warn input "-text" "" "" "" "" "" ' test_expect_success 'commit files attr=lf' ' - commit_check_warn false "lf" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && - commit_check_warn true "lf" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && - commit_check_warn input "lf" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" + commit_check_warn false "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + commit_check_warn true "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + commit_check_warn input "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" ' test_expect_success 'commit files attr=crlf' ' - commit_check_warn false "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "LF_CRLF" "" && - commit_check_warn true "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "LF_CRLF" "" && - commit_check_warn input "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "LF_CRLF" "" + commit_check_warn false "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && + commit_check_warn true "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && + commit_check_warn input "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" ' -test_expect_success 'create files cleanup' ' +# attr LF CRLF CRLFmixLF LF_mix_CR CRLFNUL +commit_chk_wrnNNO "" "" false "" "" "" "" "" +commit_chk_wrnNNO "" "" true LF_CRLF "" "" "" "" +commit_chk_wrnNNO "" "" input "" "" "" "" "" + +commit_chk_wrnNNO "auto" "" false "$WILC" "" "" "" "" +commit_chk_wrnNNO "auto" "" true LF_CRLF "" "" "" "" +commit_chk_wrnNNO "auto" "" input "" "" "" "" "" +for crlf in true false input +do + commit_chk_wrnNNO -text "" $crlf "" "" "" "" "" + commit_chk_wrnNNO -text lf $crlf "" "" "" "" "" + commit_chk_wrnNNO -text crlf $crlf "" "" "" "" "" + commit_chk_wrnNNO "" lf $crlf "" CRLF_LF CRLF_LF "" CRLF_LF + commit_chk_wrnNNO "" crlf $crlf LF_CRLF "" LF_CRLF LF_CRLF "" + commit_chk_wrnNNO auto lf $crlf "" "" "" "" "" + commit_chk_wrnNNO auto crlf $crlf LF_CRLF "" "" "" "" + commit_chk_wrnNNO text lf $crlf "" CRLF_LF CRLF_LF "" CRLF_LF + commit_chk_wrnNNO text crlf $crlf LF_CRLF "" LF_CRLF LF_CRLF "" +done + +commit_chk_wrnNNO "text" "" false "$WILC" "$WICL" "$WAMIX" "$WILC" "$WICL" +commit_chk_wrnNNO "text" "" true LF_CRLF "" LF_CRLF LF_CRLF "" +commit_chk_wrnNNO "text" "" input "" CRLF_LF CRLF_LF "" CRLF_LF + +test_expect_success 'commit NNO and cleanup' ' + git commit -m "commit files on top of NNO" && rm -f *.txt && - git reset --hard + git -c core.autocrlf=false reset --hard ' test_expect_success 'commit empty gitattribues' ' @@ -257,28 +446,37 @@ test_expect_success 'commit -text' ' check_files_in_repo input "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul ' +for crlf in true false input +do + # attr aeol LF CRLF CRLF_mix_LF LF_mix_CR CRLFNUL + check_in_repo_NNO "" "" $crlf LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + check_in_repo_NNO -text "" $crlf LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + check_in_repo_NNO -text lf $crlf LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + check_in_repo_NNO -text crlf $crlf LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + check_in_repo_NNO auto "" $crlf LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + check_in_repo_NNO auto lf $crlf LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + check_in_repo_NNO auto crlf $crlf LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + check_in_repo_NNO text "" $crlf LF LF LF LF_mix_CR LF_nul + check_in_repo_NNO text lf $crlf LF LF LF LF_mix_CR LF_nul + check_in_repo_NNO text crlf $crlf LF LF LF LF_mix_CR LF_nul +done ################################################################################ # Check how files in the repo are changed when they are checked out # How to read the table below: # - checkout_files will check multiple files with a combination of settings # and attributes (core.autocrlf=input is forbidden with core.eol=crlf) -# - parameter $1 : core.eol lf | crlf -# - parameter $2 : core.autocrlf false | true | input -# - parameter $3 : text in .gitattributs "" (empty) | auto | text | -text -# - parameter $4 : reference for a file with only LF in the repo -# - parameter $5 : reference for a file with only CRLF in the repo -# - parameter $6 : reference for a file with mixed LF and CRLF in the repo -# - parameter $7 : reference for a file with LF and CR in the repo (does somebody uses this ?) -# - parameter $8 : reference for a file with CRLF and a NUL (should be handled as binary when auto) - -# What we have in the repo: -# ----------------- EOL in repo ---------------- -# LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -# settings with checkout: -# core. core. .gitattr -# eol acrlf -# ---------------------------------------------- -# What we want to have in the working tree: +# +# - parameter $1 : text in .gitattributs "" (empty) | auto | text | -text +# - parameter $2 : ident "" | i (i == ident) +# - parameter $3 : eol in .gitattributs "" (empty) | lf | crlf +# - parameter $4 : core.autocrlf false | true | input +# - parameter $5 : core.eol "" | lf | crlf | "native" +# - parameter $6 : reference for a file with only LF in the repo +# - parameter $7 : reference for a file with only CRLF in the repo +# - parameter $8 : reference for a file with mixed LF and CRLF in the repo +# - parameter $9 : reference for a file with LF and CR in the repo +# - parameter $10 : reference for a file with CRLF and a NUL (should be handled as binary when auto) + if test_have_prereq NATIVE_CRLF then MIX_CRLF_LF=CRLF @@ -293,68 +491,62 @@ LFNUL=LF_nul fi export CRLF_MIX_LF_CR MIX NL -checkout_files lf false "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf input "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf false "auto" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf true "auto" CRLF CRLF CRLF LF_mix_CR LF_nul -checkout_files lf input "auto" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf false "text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files lf input "text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf input "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf false "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf true "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf input "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files lf false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files lf true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files lf input "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul - -checkout_files crlf false "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files crlf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files crlf false "auto" CRLF CRLF CRLF LF_mix_CR LF_nul -checkout_files crlf true "auto" CRLF CRLF CRLF LF_mix_CR LF_nul -checkout_files crlf false "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files crlf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files crlf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files crlf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files crlf false "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files crlf true "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files crlf false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files crlf true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul - -checkout_files "" false "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" true "" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" input "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" false "auto" $NL CRLF $MIX_CRLF_LF LF_mix_CR LF_nul -checkout_files "" true "auto" CRLF CRLF CRLF LF_mix_CR LF_nul -checkout_files "" input "auto" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" false "text" $NL CRLF $MIX_CRLF_LF $MIX_LF_CR $LFNUL -checkout_files "" true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files "" input "text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" false "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" true "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" input "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" false "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" true "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" input "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files "" false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files "" true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files "" input "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul - -checkout_files native false "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files native true "" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files native false "auto" $NL CRLF $MIX_CRLF_LF LF_mix_CR LF_nul -checkout_files native true "auto" CRLF CRLF CRLF LF_mix_CR LF_nul -checkout_files native false "text" $NL CRLF $MIX_CRLF_LF $MIX_LF_CR $LFNUL -checkout_files native true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files native false "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files native true "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files native false "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files native true "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul -checkout_files native false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -checkout_files native true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +# Same handling with and without ident +for id in "" ident +do + for ceol in lf crlf native + do + for crlf in true false input + do + # -text overrides core.autocrlf and core.eol + # text and eol=crlf or eol=lf override core.autocrlf and core.eol + checkout_files -text "$id" "" "$crlf" "$ceol" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul + checkout_files -text "$id" "lf" "$crlf" "$ceol" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul + checkout_files -text "$id" "crlf" "$crlf" "$ceol" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul + # text + checkout_files text "$id" "lf" "$crlf" "$ceol" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul + checkout_files text "$id" "crlf" "$crlf" "$ceol" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + # currently the same as text, eol=XXX + checkout_files auto "$id" "lf" "$crlf" "$ceol" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul + checkout_files auto "$id" "crlf" "$crlf" "$ceol" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul + done + + # core.autocrlf false, different core.eol + checkout_files "" "$id" "" false "$ceol" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul + # core.autocrlf true + checkout_files "" "$id" "" true "$ceol" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul + # text: core.autocrlf = true overrides core.eol + checkout_files auto "$id" "" true "$ceol" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul + checkout_files text "$id" "" true "$ceol" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + # text: core.autocrlf = input overrides core.eol + checkout_files text "$id" "" input "$ceol" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul + checkout_files auto "$id" "" input "$ceol" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul + # text=auto + eol=XXX + done + # text: core.autocrlf=false uses core.eol + checkout_files text "$id" "" false crlf CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + checkout_files text "$id" "" false lf LF CRLF CRLF_mix_LF LF_mix_CR LF_nul + # text: core.autocrlf=false and core.eol unset(or native) uses native eol + checkout_files text "$id" "" false "" $NL CRLF $MIX_CRLF_LF $MIX_LF_CR $LFNUL + checkout_files text "$id" "" false native $NL CRLF $MIX_CRLF_LF $MIX_LF_CR $LFNUL + # auto: core.autocrlf=false and core.eol unset(or native) uses native eol + checkout_files auto "$id" "" false "" $NL CRLF CRLF_mix_LF LF_mix_CR LF_nul + checkout_files auto "$id" "" false native $NL CRLF CRLF_mix_LF LF_mix_CR LF_nul +done + +# Should be the last test case: remove some files from the worktree +test_expect_success 'ls-files --eol -d -z' ' + rm crlf_false_attr__CRLF.txt crlf_false_attr__CRLF_mix_LF.txt crlf_false_attr__LF.txt .gitattributes && + cat >expect <<-\EOF && + i/crlf w/ crlf_false_attr__CRLF.txt + i/lf w/ .gitattributes + i/lf w/ crlf_false_attr__LF.txt + i/mixed w/ crlf_false_attr__CRLF_mix_LF.txt + EOF + git ls-files --eol -d | + sed -e "s!attr/[^ ]*!!g" -e "s/ / /g" -e "s/ */ /g" | + sort >actual && + test_cmp expect actual +' test_done diff --git a/t/t0030-stripspace.sh b/t/t0030-stripspace.sh index 29e91d861c..bbf3e39e3d 100755 --- a/t/t0030-stripspace.sh +++ b/t/t0030-stripspace.sh @@ -432,6 +432,15 @@ test_expect_success '-c with changed comment char' ' test_cmp expect actual ' +test_expect_success '-c with comment char defined in .git/config' ' + test_config core.commentchar = && + printf "= foo\n" >expect && + printf "foo" | ( + mkdir sub && cd sub && git stripspace -c + ) >actual && + test_cmp expect actual +' + test_expect_success 'avoid SP-HT sequence in commented line' ' printf "#\tone\n#\n# two\n" >expect && printf "\tone\n\ntwo\n" | git stripspace -c >actual && diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index b044785175..74d2cd76fe 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -7,7 +7,7 @@ test_description='our own option parser' . ./test-lib.sh -cat > expect << EOF +cat >expect <<\EOF usage: test-parse-options <options> --yes get a boolean @@ -19,6 +19,7 @@ usage: test-parse-options <options> -i, --integer <n> get a integer -j <n> get a integer, too + -m, --magnitude <n> get a magnitude --set23 set integer to 23 -t <time> get timestamp of <time> -L, --length <str> get length of <str> @@ -44,62 +45,24 @@ Standard options -v, --verbose be verbose -n, --dry-run dry run -q, --quiet be quiet + --expect <string> expected output in the variable dump EOF test_expect_success 'test help' ' - test_must_fail test-parse-options -h > output 2> output.err && + test_must_fail test-parse-options -h >output 2>output.err && test_must_be_empty output.err && test_i18ncmp expect output ' mv expect expect.err -cat >expect.template <<EOF -boolean: 0 -integer: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: 0 -quiet: no -dry run: no -file: (not set) -EOF - -check() { - what="$1" && - shift && - expect="$1" && - shift && - sed "s/^$what .*/$what $expect/" <expect.template >expect && - test-parse-options $* >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output -} - -check_i18n() { +check () { what="$1" && shift && expect="$1" && shift && - sed "s/^$what .*/$what $expect/" <expect.template >expect && - test-parse-options $* >output 2>output.err && - test_must_be_empty output.err && - test_i18ncmp expect output -} - -check_unknown() { - case "$1" in - --*) - echo error: unknown option \`${1#--}\' >expect ;; - -*) - echo error: unknown switch \`${1#-}\' >expect ;; - esac && - cat expect.err >>expect && - test_must_fail test-parse-options $* >output 2>output.err && - test_must_be_empty output && - test_cmp expect output.err + test-parse-options --expect="$what $expect" "$@" } check_unknown_i18n() { @@ -132,41 +95,66 @@ test_expect_success 'OPT_BOOL() no negation #2' 'check_unknown_i18n --no-no-fear test_expect_success 'OPT_BOOL() positivation' 'check boolean: 0 -D --doubt' -cat > expect << EOF +test_expect_success 'OPT_INT() negative' 'check integer: -2345 -i -2345' + +test_expect_success 'OPT_MAGNITUDE() simple' ' + check magnitude: 2345678 -m 2345678 +' + +test_expect_success 'OPT_MAGNITUDE() kilo' ' + check magnitude: 239616 -m 234k +' + +test_expect_success 'OPT_MAGNITUDE() mega' ' + check magnitude: 104857600 -m 100m +' + +test_expect_success 'OPT_MAGNITUDE() giga' ' + check magnitude: 1073741824 -m 1g +' + +test_expect_success 'OPT_MAGNITUDE() 3giga' ' + check magnitude: 3221225472 -m 3g +' + +cat >expect <<\EOF boolean: 2 integer: 1729 +magnitude: 16384 timestamp: 0 string: 123 abbrev: 7 verbose: 2 -quiet: no +quiet: 0 dry run: yes file: prefix/my.file EOF test_expect_success 'short options' ' - test-parse-options -s123 -b -i 1729 -b -vv -n -F my.file \ - > output 2> output.err && + test-parse-options -s123 -b -i 1729 -m 16k -b -vv -n -F my.file \ + >output 2>output.err && test_cmp expect output && test_must_be_empty output.err ' -cat > expect << EOF +cat >expect <<\EOF boolean: 2 integer: 1729 +magnitude: 16384 timestamp: 0 string: 321 abbrev: 10 verbose: 2 -quiet: no +quiet: 0 dry run: no file: prefix/fi.le EOF test_expect_success 'long options' ' - test-parse-options --boolean --integer 1729 --boolean --string2=321 \ - --verbose --verbose --no-dry-run --abbrev=10 --file fi.le\ - --obsolete > output 2> output.err && + test-parse-options --boolean --integer 1729 --magnitude 16k \ + --boolean --string2=321 --verbose --verbose --no-dry-run \ + --abbrev=10 --file fi.le --obsolete \ + >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' @@ -177,14 +165,15 @@ test_expect_success 'missing required value' ' test_expect_code 129 test-parse-options --file ' -cat > expect << EOF +cat >expect <<\EOF boolean: 1 integer: 13 +magnitude: 0 timestamp: 0 string: 123 abbrev: 7 -verbose: 0 -quiet: no +verbose: -1 +quiet: 0 dry run: no file: (not set) arg 00: a1 @@ -194,104 +183,75 @@ EOF test_expect_success 'intermingled arguments' ' test-parse-options a1 --string 123 b1 --boolean -j 13 -- --boolean \ - > output 2> output.err && + >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' -cat > expect << EOF +cat >expect <<\EOF boolean: 0 integer: 2 +magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 -quiet: no +verbose: -1 +quiet: 0 dry run: no file: (not set) EOF test_expect_success 'unambiguously abbreviated option' ' - test-parse-options --int 2 --boolean --no-bo > output 2> output.err && + test-parse-options --int 2 --boolean --no-bo >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' test_expect_success 'unambiguously abbreviated option with "="' ' - test-parse-options --int=2 > output 2> output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="integer: 2" --int=2 ' test_expect_success 'ambiguously abbreviated option' ' test_expect_code 129 test-parse-options --strin 123 ' -cat > expect << EOF -boolean: 0 -integer: 0 -timestamp: 0 -string: 123 -abbrev: 7 -verbose: 0 -quiet: no -dry run: no -file: (not set) -EOF - test_expect_success 'non ambiguous option (after two options it abbreviates)' ' - test-parse-options --st 123 > output 2> output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="string: 123" --st 123 ' -cat > typo.err << EOF -error: did you mean \`--boolean\` (with two dashes ?) +cat >typo.err <<\EOF +error: did you mean `--boolean` (with two dashes ?) EOF test_expect_success 'detect possible typos' ' - test_must_fail test-parse-options -boolean > output 2> output.err && + test_must_fail test-parse-options -boolean >output 2>output.err && test_must_be_empty output && test_cmp typo.err output.err ' -cat > typo.err << EOF -error: did you mean \`--ambiguous\` (with two dashes ?) +cat >typo.err <<\EOF +error: did you mean `--ambiguous` (with two dashes ?) EOF test_expect_success 'detect possible typos' ' - test_must_fail test-parse-options -ambiguous > output 2> output.err && + test_must_fail test-parse-options -ambiguous >output 2>output.err && test_must_be_empty output && test_cmp typo.err output.err ' -cat > expect <<EOF -boolean: 0 -integer: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: 0 -quiet: no -dry run: no -file: (not set) -arg 00: --quux -EOF - test_expect_success 'keep some options as arguments' ' - test-parse-options --quux > output 2> output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="arg 00: --quux" --quux ' -cat > expect <<EOF +cat >expect <<\EOF boolean: 0 integer: 0 +magnitude: 0 timestamp: 1 string: (not set) abbrev: 7 -verbose: 0 -quiet: yes +verbose: -1 +quiet: 1 dry run: no file: (not set) arg 00: foo @@ -299,120 +259,89 @@ EOF test_expect_success 'OPT_DATE() works' ' test-parse-options -t "1970-01-01 00:00:01 +0000" \ - foo -q > output 2> output.err && + foo -q >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' -cat > expect <<EOF +cat >expect <<\EOF Callback: "four", 0 boolean: 5 integer: 4 +magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 -quiet: no +verbose: -1 +quiet: 0 dry run: no file: (not set) EOF test_expect_success 'OPT_CALLBACK() and OPT_BIT() work' ' - test-parse-options --length=four -b -4 > output 2> output.err && + test-parse-options --length=four -b -4 >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' -cat > expect <<EOF -Callback: "not set", 1 -EOF +>expect test_expect_success 'OPT_CALLBACK() and callback errors work' ' - test_must_fail test-parse-options --no-length > output 2> output.err && + test_must_fail test-parse-options --no-length >output 2>output.err && test_i18ncmp expect output && test_i18ncmp expect.err output.err ' -cat > expect <<EOF +cat >expect <<\EOF boolean: 1 integer: 23 +magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 -quiet: no +verbose: -1 +quiet: 0 dry run: no file: (not set) EOF test_expect_success 'OPT_BIT() and OPT_SET_INT() work' ' - test-parse-options --set23 -bbbbb --no-or4 > output 2> output.err && + test-parse-options --set23 -bbbbb --no-or4 >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' test_expect_success 'OPT_NEGBIT() and OPT_SET_INT() work' ' - test-parse-options --set23 -bbbbb --neg-or4 > output 2> output.err && + test-parse-options --set23 -bbbbb --neg-or4 >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' -cat > expect <<EOF -boolean: 6 -integer: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: 0 -quiet: no -dry run: no -file: (not set) -EOF - test_expect_success 'OPT_BIT() works' ' - test-parse-options -bb --or4 > output 2> output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="boolean: 6" -bb --or4 ' test_expect_success 'OPT_NEGBIT() works' ' - test-parse-options -bb --no-neg-or4 > output 2> output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="boolean: 6" -bb --no-neg-or4 ' test_expect_success 'OPT_COUNTUP() with PARSE_OPT_NODASH works' ' - test-parse-options + + + + + + > output 2> output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="boolean: 6" + + + + + + ' -cat > expect <<EOF -boolean: 0 -integer: 12345 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: 0 -quiet: no -dry run: no -file: (not set) -EOF - test_expect_success 'OPT_NUMBER_CALLBACK() works' ' - test-parse-options -12345 > output 2> output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="integer: 12345" -12345 ' -cat >expect <<EOF +cat >expect <<\EOF boolean: 0 integer: 0 +magnitude: 0 timestamp: 0 string: (not set) abbrev: 7 -verbose: 0 -quiet: no +verbose: -1 +quiet: 0 dry run: no file: (not set) EOF @@ -423,7 +352,7 @@ test_expect_success 'negation of OPT_NONEG flags is not ambiguous' ' test_cmp expect output ' -cat >>expect <<'EOF' +cat >>expect <<\EOF list: foo list: bar list: baz @@ -439,4 +368,28 @@ test_expect_success '--no-list resets list' ' test_cmp expect output ' +test_expect_success 'multiple quiet levels' ' + test-parse-options --expect="quiet: 3" -q -q -q +' + +test_expect_success 'multiple verbose levels' ' + test-parse-options --expect="verbose: 3" -v -v -v +' + +test_expect_success '--no-quiet sets --quiet to 0' ' + test-parse-options --expect="quiet: 0" --no-quiet +' + +test_expect_success '--no-quiet resets multiple -q to 0' ' + test-parse-options --expect="quiet: 0" -q -q -q --no-quiet +' + +test_expect_success '--no-verbose sets verbose to 0' ' + test-parse-options --expect="verbose: 0" --no-verbose +' + +test_expect_success '--no-verbose resets multiple verbose to 0' ' + test-parse-options --expect="verbose: 0" -v -v -v --no-verbose +' + test_done diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index 93605f42f2..444b5a4df8 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -19,6 +19,13 @@ relative_path() { "test \"\$(test-path-utils relative_path '$1' '$2')\" = '$expected'" } +test_submodule_relative_url() { + test_expect_success "test_submodule_relative_url: $1 $2 $3 => $4" " + actual=\$(git submodule--helper resolve-relative-url-test '$1' '$2' '$3') && + test \"\$actual\" = '$4' + " +} + test_git_path() { test_expect_success "git-path $1 $2 => $3" " $1 git rev-parse --git-path $2 >actual && @@ -36,12 +43,21 @@ if test $rootoff = 2; then rootoff= # we are on Unix else rootoff=$(($rootoff-1)) + # In MSYS2, the root directory "/" is translated into a Windows + # directory *with* trailing slash. Let's test for that and adjust + # our expected longest ancestor length accordingly. + case "$(test-path-utils print_path /)" in + */) rootslash=1;; + *) rootslash=0;; + esac fi ancestor() { # We do some math with the expected ancestor length. expected=$3 if test -n "$rootoff" && test "x$expected" != x-1; then + expected=$(($expected-$rootslash)) + test $expected -lt 0 || expected=$(($expected+$rootoff)) fi test_expect_success "longest ancestor: $1 $2 => $expected" \ @@ -59,6 +75,9 @@ case $(uname -s) in ;; esac +test_expect_success basename 'test-path-utils basename' +test_expect_success dirname 'test-path-utils dirname' + norm_path "" "" norm_path . "" norm_path ./ "" @@ -266,18 +285,66 @@ test_expect_success 'setup common repository' 'git --git-dir=bar init' test_git_path GIT_COMMON_DIR=bar index .git/index test_git_path GIT_COMMON_DIR=bar HEAD .git/HEAD test_git_path GIT_COMMON_DIR=bar logs/HEAD .git/logs/HEAD +test_git_path GIT_COMMON_DIR=bar logs/refs/bisect/foo .git/logs/refs/bisect/foo +test_git_path GIT_COMMON_DIR=bar logs/refs/bisec/foo bar/logs/refs/bisec/foo +test_git_path GIT_COMMON_DIR=bar logs/refs/bisec bar/logs/refs/bisec +test_git_path GIT_COMMON_DIR=bar logs/refs/bisectfoo bar/logs/refs/bisectfoo test_git_path GIT_COMMON_DIR=bar objects bar/objects test_git_path GIT_COMMON_DIR=bar objects/bar bar/objects/bar test_git_path GIT_COMMON_DIR=bar info/exclude bar/info/exclude test_git_path GIT_COMMON_DIR=bar info/grafts bar/info/grafts test_git_path GIT_COMMON_DIR=bar info/sparse-checkout .git/info/sparse-checkout +test_git_path GIT_COMMON_DIR=bar info//sparse-checkout .git/info//sparse-checkout test_git_path GIT_COMMON_DIR=bar remotes/bar bar/remotes/bar test_git_path GIT_COMMON_DIR=bar branches/bar bar/branches/bar test_git_path GIT_COMMON_DIR=bar logs/refs/heads/master bar/logs/refs/heads/master test_git_path GIT_COMMON_DIR=bar refs/heads/master bar/refs/heads/master +test_git_path GIT_COMMON_DIR=bar refs/bisect/foo .git/refs/bisect/foo test_git_path GIT_COMMON_DIR=bar hooks/me bar/hooks/me test_git_path GIT_COMMON_DIR=bar config bar/config test_git_path GIT_COMMON_DIR=bar packed-refs bar/packed-refs test_git_path GIT_COMMON_DIR=bar shallow bar/shallow +# In the tests below, $(pwd) must be used because it is a native path on +# Windows and avoids MSYS's path mangling (which simplifies "foo/../bar" and +# strips the dot from trailing "/."). + +test_submodule_relative_url "../" "../foo" "../submodule" "../../submodule" +test_submodule_relative_url "../" "../foo/bar" "../submodule" "../../foo/submodule" +test_submodule_relative_url "../" "../foo/submodule" "../submodule" "../../foo/submodule" +test_submodule_relative_url "../" "./foo" "../submodule" "../submodule" +test_submodule_relative_url "../" "./foo/bar" "../submodule" "../foo/submodule" +test_submodule_relative_url "../../../" "../foo/bar" "../sub/a/b/c" "../../../../foo/sub/a/b/c" +test_submodule_relative_url "../" "$(pwd)/addtest" "../repo" "$(pwd)/repo" +test_submodule_relative_url "../" "foo/bar" "../submodule" "../foo/submodule" +test_submodule_relative_url "../" "foo" "../submodule" "../submodule" + +test_submodule_relative_url "(null)" "../foo/bar" "../sub/a/b/c" "../foo/sub/a/b/c" +test_submodule_relative_url "(null)" "../foo/bar" "../sub/a/b/c/" "../foo/sub/a/b/c" +test_submodule_relative_url "(null)" "../foo/bar/" "../sub/a/b/c" "../foo/sub/a/b/c" +test_submodule_relative_url "(null)" "../foo/bar" "../submodule" "../foo/submodule" +test_submodule_relative_url "(null)" "../foo/submodule" "../submodule" "../foo/submodule" +test_submodule_relative_url "(null)" "../foo" "../submodule" "../submodule" +test_submodule_relative_url "(null)" "./foo/bar" "../submodule" "foo/submodule" +test_submodule_relative_url "(null)" "./foo" "../submodule" "submodule" +test_submodule_relative_url "(null)" "//somewhere else/repo" "../subrepo" "//somewhere else/subrepo" +test_submodule_relative_url "(null)" "$(pwd)/subsuper_update_r" "../subsubsuper_update_r" "$(pwd)/subsubsuper_update_r" +test_submodule_relative_url "(null)" "$(pwd)/super_update_r2" "../subsuper_update_r" "$(pwd)/subsuper_update_r" +test_submodule_relative_url "(null)" "$(pwd)/." "../." "$(pwd)/." +test_submodule_relative_url "(null)" "$(pwd)" "./." "$(pwd)/." +test_submodule_relative_url "(null)" "$(pwd)/addtest" "../repo" "$(pwd)/repo" +test_submodule_relative_url "(null)" "$(pwd)" "./Ã¥ äö" "$(pwd)/Ã¥ äö" +test_submodule_relative_url "(null)" "$(pwd)/." "../submodule" "$(pwd)/submodule" +test_submodule_relative_url "(null)" "$(pwd)/submodule" "../submodule" "$(pwd)/submodule" +test_submodule_relative_url "(null)" "$(pwd)/home2/../remote" "../bundle1" "$(pwd)/home2/../bundle1" +test_submodule_relative_url "(null)" "$(pwd)/submodule_update_repo" "./." "$(pwd)/submodule_update_repo/." +test_submodule_relative_url "(null)" "file:///tmp/repo" "../subrepo" "file:///tmp/subrepo" +test_submodule_relative_url "(null)" "foo/bar" "../submodule" "foo/submodule" +test_submodule_relative_url "(null)" "foo" "../submodule" "submodule" +test_submodule_relative_url "(null)" "helper:://hostname/repo" "../subrepo" "helper:://hostname/subrepo" +test_submodule_relative_url "(null)" "ssh://hostname/repo" "../subrepo" "ssh://hostname/subrepo" +test_submodule_relative_url "(null)" "ssh://hostname:22/repo" "../subrepo" "ssh://hostname:22/subrepo" +test_submodule_relative_url "(null)" "user@host:path/to/repo" "../subrepo" "user@host:path/to/subrepo" +test_submodule_relative_url "(null)" "user@host:repo" "../subrepo" "user@host:subrepo" + test_done diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index 9acf628726..12228b4aa6 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -47,4 +47,57 @@ test_expect_success POSIXPERM,SANITY 'unreadable directory in PATH' ' test_cmp expect actual ' +cat >expect <<-EOF +preloaded output of a child +Hello +World +preloaded output of a child +Hello +World +preloaded output of a child +Hello +World +preloaded output of a child +Hello +World +EOF + +test_expect_success 'run_command runs in parallel with more jobs available than tasks' ' + test-run-command run-command-parallel 5 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test_cmp expect actual +' + +test_expect_success 'run_command runs in parallel with as many jobs as tasks' ' + test-run-command run-command-parallel 4 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test_cmp expect actual +' + +test_expect_success 'run_command runs in parallel with more tasks than jobs available' ' + test-run-command run-command-parallel 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test_cmp expect actual +' + +cat >expect <<-EOF +preloaded output of a child +asking for a quick stop +preloaded output of a child +asking for a quick stop +preloaded output of a child +asking for a quick stop +EOF + +test_expect_success 'run_command is asked to abort gracefully' ' + test-run-command run-command-abort 3 false 2>actual && + test_cmp expect actual +' + +cat >expect <<-EOF +no further jobs available +EOF + +test_expect_success 'run_command outputs ' ' + test-run-command run-command-no-jobs 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test_cmp expect actual +' + test_done diff --git a/t/t0070-fundamental.sh b/t/t0070-fundamental.sh index 5ed69a6f56..991ed2a48d 100755 --- a/t/t0070-fundamental.sh +++ b/t/t0070-fundamental.sh @@ -31,7 +31,7 @@ test_expect_success 'git_mkstemps_mode does not fail if fd 0 is not open' ' test_expect_success 'check for a bug in the regex routines' ' # if this test fails, re-build git with NO_REGEX=1 - test-regex + test-regex --bug ' test_done diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh index 601d02d71f..adfd4f0b5e 100755 --- a/t/t0090-cache-tree.sh +++ b/t/t0090-cache-tree.sh @@ -199,6 +199,30 @@ test_expect_success 'checkout -B gives cache-tree' ' test_cache_tree ' +test_expect_success 'merge --ff-only maintains cache-tree' ' + git checkout current && + git checkout -b changes && + test_commit llamas && + test_commit pachyderm && + test_cache_tree && + git checkout current && + test_cache_tree && + git merge --ff-only changes && + test_cache_tree +' + +test_expect_success 'merge maintains cache-tree' ' + git checkout current && + git checkout -b changes2 && + test_commit alpacas && + test_cache_tree && + git checkout current && + test_commit struthio && + test_cache_tree && + git merge changes2 && + test_cache_tree +' + test_expect_success 'partial commit gives cache-tree' ' git checkout -b partial no-children && test_commit one && @@ -218,4 +242,14 @@ test_expect_success 'no phantom error when switching trees' ' ! test -s errors ' +test_expect_success 'switching trees does not invalidate shared index' ' + git update-index --split-index && + >split && + git add split && + test-dump-split-index .git/index | grep -v ^own >before && + git commit -m "as-is" && + test-dump-split-index .git/index | grep -v ^own >after && + test_cmp before after +' + test_done diff --git a/t/t0202/test.pl b/t/t0202/test.pl index 2c10cb4693..2cbf7b9590 100755 --- a/t/t0202/test.pl +++ b/t/t0202/test.pl @@ -4,7 +4,7 @@ use lib (split(/:/, $ENV{GITPERLLIB})); use strict; use warnings; use POSIX qw(:locale_h); -use Test::More tests => 8; +use Test::More tests => 13; use Git::I18N; my $has_gettext_library = $Git::I18N::__HAS_LIBRARY; @@ -31,6 +31,8 @@ is_deeply(\@Git::I18N::EXPORT, \@Git::I18N::EXPORT_OK, "sanity: Git::I18N export # more gettext wrapper functions. my %prototypes = (qw( __ $ + __n $$$ + N__ $ )); while (my ($sub, $proto) = each %prototypes) { is(prototype(\&{"Git::I18N::$sub"}), $proto, "sanity: $sub has a $proto prototype"); @@ -46,6 +48,16 @@ is_deeply(\@Git::I18N::EXPORT, \@Git::I18N::EXPORT_OK, "sanity: Git::I18N export my ($got, $expect) = (('TEST: A Perl test string') x 2); is(__($got), $expect, "Passing a string through __() in the C locale works"); + + my ($got_singular, $got_plural, $expect_singular, $expect_plural) = + (('TEST: 1 file', 'TEST: n files') x 2); + + is(__n($got_singular, $got_plural, 1), $expect_singular, + "Get singular string through __n() in C locale"); + is(__n($got_singular, $got_plural, 2), $expect_plural, + "Get plural string through __n() in C locale"); + + is(N__($got), $expect, "Passing a string through N__() in the C locale works"); } # Test a basic message on different locales diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index d7ef44b4a2..03bd31e9f2 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -298,4 +298,15 @@ test_expect_success 'helpers can abort the process' ' test_cmp expect stdout ' +test_expect_success 'empty helper spec resets helper list' ' + test_config credential.helper "verbatim file file" && + check fill "" "verbatim cmdline cmdline" <<-\EOF + -- + username=cmdline + password=cmdline + -- + verbatim: get + EOF +' + test_done diff --git a/t/t0302-credential-store.sh b/t/t0302-credential-store.sh index 0979df93a1..1d8d1f210b 100755 --- a/t/t0302-credential-store.sh +++ b/t/t0302-credential-store.sh @@ -75,7 +75,7 @@ test_expect_success 'get: use xdg file if home file has no matches' ' EOF ' -test_expect_success POSIXPERM 'get: use xdg file if home file is unreadable' ' +test_expect_success POSIXPERM,SANITY 'get: use xdg file if home file is unreadable' ' echo "https://home-user:home-pass@example.com" >"$HOME/.git-credentials" && chmod -r "$HOME/.git-credentials" && mkdir -p "$HOME/.config/git" && diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index 93a4794930..b19f332694 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -231,7 +231,7 @@ $tag_content | git cat-file --batch)" ' -test_expect_success "--batch-check for an emtpy line" ' +test_expect_success "--batch-check for an empty line" ' test " missing" = "$(echo | git cat-file --batch-check)" ' @@ -547,4 +547,30 @@ test_expect_success 'git cat-file --batch --follow-symlink returns correct sha a test_cmp expect actual ' +test_expect_success 'cat-file --batch-all-objects shows all objects' ' + # make new repos so we know the full set of objects; we will + # also make sure that there are some packed and some loose + # objects, some referenced and some not, and that there are + # some available only via alternates. + git init all-one && + ( + cd all-one && + echo content >file && + git add file && + git commit -qm base && + git rev-parse HEAD HEAD^{tree} HEAD:file && + git repack -ad && + echo not-cloned | git hash-object -w --stdin + ) >expect.unsorted && + git clone -s all-one all-two && + ( + cd all-two && + echo local-unref | git hash-object -w --stdin + ) >>expect.unsorted && + sort <expect.unsorted >expect && + git -C all-two cat-file --batch-all-objects \ + --batch-check="%(objectname)" >actual && + test_cmp expect actual +' + test_done diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh index 7d2baa15bb..c5245c5cb4 100755 --- a/t/t1007-hash-object.sh +++ b/t/t1007-hash-object.sh @@ -101,7 +101,7 @@ test_expect_success 'git hash-object --stdin file1 <file0 first operates on file test "$obname1" = "$obname1new" ' -test_expect_success 'check that appropriate filter is invoke when --path is used' ' +test_expect_success 'set up crlf tests' ' echo fooQ | tr Q "\\015" >file0 && cp file0 file1 && echo "file0 -crlf" >.gitattributes && @@ -109,7 +109,10 @@ test_expect_success 'check that appropriate filter is invoke when --path is used git config core.autocrlf true && file0_sha=$(git hash-object file0) && file1_sha=$(git hash-object file1) && - test "$file0_sha" != "$file1_sha" && + test "$file0_sha" != "$file1_sha" +' + +test_expect_success 'check that appropriate filter is invoke when --path is used' ' path1_sha=$(git hash-object --path=file1 file0) && path0_sha=$(git hash-object --path=file0 file1) && test "$file0_sha" = "$path0_sha" && @@ -117,38 +120,30 @@ test_expect_success 'check that appropriate filter is invoke when --path is used path1_sha=$(cat file0 | git hash-object --path=file1 --stdin) && path0_sha=$(cat file1 | git hash-object --path=file0 --stdin) && test "$file0_sha" = "$path0_sha" && - test "$file1_sha" = "$path1_sha" && - git config --unset core.autocrlf + test "$file1_sha" = "$path1_sha" +' + +test_expect_success 'gitattributes also work in a subdirectory' ' + mkdir subdir && + ( + cd subdir && + subdir_sha0=$(git hash-object ../file0) && + subdir_sha1=$(git hash-object ../file1) && + test "$file0_sha" = "$subdir_sha0" && + test "$file1_sha" = "$subdir_sha1" + ) ' test_expect_success 'check that --no-filters option works' ' - echo fooQ | tr Q "\\015" >file0 && - cp file0 file1 && - echo "file0 -crlf" >.gitattributes && - echo "file1 crlf" >>.gitattributes && - git config core.autocrlf true && - file0_sha=$(git hash-object file0) && - file1_sha=$(git hash-object file1) && - test "$file0_sha" != "$file1_sha" && nofilters_file1=$(git hash-object --no-filters file1) && test "$file0_sha" = "$nofilters_file1" && nofilters_file1=$(cat file1 | git hash-object --stdin) && - test "$file0_sha" = "$nofilters_file1" && - git config --unset core.autocrlf + test "$file0_sha" = "$nofilters_file1" ' test_expect_success 'check that --no-filters option works with --stdin-paths' ' - echo fooQ | tr Q "\\015" >file0 && - cp file0 file1 && - echo "file0 -crlf" >.gitattributes && - echo "file1 crlf" >>.gitattributes && - git config core.autocrlf true && - file0_sha=$(git hash-object file0) && - file1_sha=$(git hash-object file1) && - test "$file0_sha" != "$file1_sha" && nofilters_file1=$(echo "file1" | git hash-object --stdin-paths --no-filters) && - test "$file0_sha" = "$nofilters_file1" && - git config --unset core.autocrlf + test "$file0_sha" = "$nofilters_file1" ' pop_repo @@ -188,9 +183,30 @@ for args in "-w --stdin-paths" "--stdin-paths -w"; do pop_repo done -test_expect_success 'corrupt tree' ' +test_expect_success 'too-short tree' ' echo abc >malformed-tree && - test_must_fail git hash-object -t tree malformed-tree + test_must_fail git hash-object -t tree malformed-tree 2>err && + test_i18ngrep "too-short tree object" err +' + +hex2oct() { + perl -ne 'printf "\\%03o", hex for /../g' +} + +test_expect_success 'malformed mode in tree' ' + hex_sha1=$(echo foo | git hash-object --stdin -w) && + bin_sha1=$(echo $hex_sha1 | hex2oct) && + printf "9100644 \0$bin_sha1" >tree-with-malformed-mode && + test_must_fail git hash-object -t tree tree-with-malformed-mode 2>err && + test_i18ngrep "malformed mode in tree entry" err +' + +test_expect_success 'empty filename in tree' ' + hex_sha1=$(echo foo | git hash-object --stdin -w) && + bin_sha1=$(echo $hex_sha1 | hex2oct) && + printf "100644 \0$bin_sha1" >tree-with-empty-filename && + test_must_fail git hash-object -t tree tree-with-empty-filename 2>err && + test_i18ngrep "empty filename in tree entry" err ' test_expect_success 'corrupt commit' ' diff --git a/t/t1011-read-tree-sparse-checkout.sh b/t/t1011-read-tree-sparse-checkout.sh index 0c74beedd2..c167f606ca 100755 --- a/t/t1011-read-tree-sparse-checkout.sh +++ b/t/t1011-read-tree-sparse-checkout.sh @@ -15,11 +15,11 @@ test_description='sparse checkout tests . "$TEST_DIRECTORY"/lib-read-tree.sh test_expect_success 'setup' ' - cat >expected <<-\EOF && + cat >expected <<-EOF && 100644 77f0ba1734ed79d12881f81b36ee134de6a3327b 0 init.t - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 sub/added - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 sub/addedtoo - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 subsub/added + 100644 $EMPTY_BLOB 0 sub/added + 100644 $EMPTY_BLOB 0 sub/addedtoo + 100644 $EMPTY_BLOB 0 subsub/added EOF cat >expected.swt <<-\EOF && H init.t @@ -244,10 +244,10 @@ test_expect_success 'print errors when failed to update worktree' ' error: The following untracked working tree files would be overwritten by checkout: sub/added sub/addedtoo -Please move or remove them before you can switch branches. +Please move or remove them before you switch branches. Aborting EOF - test_cmp expected actual + test_i18ncmp expected actual ' test_expect_success 'checkout without --ignore-skip-worktree-bits' ' diff --git a/t/t1020-subdirectory.sh b/t/t1020-subdirectory.sh index 8e22b03cdd..df3183ea1a 100755 --- a/t/t1020-subdirectory.sh +++ b/t/t1020-subdirectory.sh @@ -141,13 +141,13 @@ test_expect_success 'GIT_PREFIX for !alias' ' test_expect_success 'GIT_PREFIX for built-ins' ' # Use GIT_EXTERNAL_DIFF to test that the "diff" built-in # receives the GIT_PREFIX variable. - printf "dir/" >expect && - printf "#!/bin/sh\n" >diff && - printf "printf \"\$GIT_PREFIX\"" >>diff && - chmod +x diff && + echo "dir/" >expect && + write_script diff <<-\EOF && + printf "%s\n" "$GIT_PREFIX" + EOF ( cd dir && - printf "change" >two && + echo "change" >two && GIT_EXTERNAL_DIFF=./diff git diff >../actual git checkout -- two ) && diff --git a/t/t1050-large.sh b/t/t1050-large.sh index f9f3d1391f..6fd264cff0 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -5,6 +5,12 @@ test_description='adding and checking out large blobs' . ./test-lib.sh +# This should be moved to test-lib.sh together with the +# copy in t0021 after both topics have graduated to 'master'. +file_size () { + perl -e 'print -s $ARGV[0]' "$1" +} + test_expect_success setup ' # clone does not allow us to pass core.bigfilethreshold to # new repos, so set core.bigfilethreshold globally @@ -17,6 +23,29 @@ test_expect_success setup ' export GIT_ALLOC_LIMIT ' +# add a large file with different settings +while read expect config +do + test_expect_success "add with $config" ' + test_when_finished "rm -f .git/objects/pack/pack-*.* .git/index" && + git $config add large1 && + sz=$(file_size .git/objects/pack/pack-*.pack) && + case "$expect" in + small) test "$sz" -le 100000 ;; + large) test "$sz" -ge 100000 ;; + esac + ' +done <<\EOF +large -c core.compression=0 +small -c core.compression=9 +large -c core.compression=0 -c pack.compression=0 +large -c core.compression=9 -c pack.compression=0 +small -c core.compression=0 -c pack.compression=9 +small -c core.compression=9 -c pack.compression=9 +large -c pack.compression=0 +small -c pack.compression=9 +EOF + test_expect_success 'add a large file or two' ' git add large1 huge large2 && # make sure we got a single packfile and no loose objects @@ -177,10 +206,9 @@ test_expect_success 'zip achiving, deflate' ' git archive --format=zip HEAD >/dev/null ' -test_expect_success 'fsck' ' - test_must_fail git fsck 2>err && - n=$(grep "error: attempting to allocate .* over limit" err | wc -l) && - test "$n" -gt 1 +test_expect_success 'fsck large blobs' ' + git fsck 2>err && + test_must_be_empty err ' test_done diff --git a/t/t1090-sparse-checkout-scope.sh b/t/t1090-sparse-checkout-scope.sh new file mode 100755 index 0000000000..1f61eb3e88 --- /dev/null +++ b/t/t1090-sparse-checkout-scope.sh @@ -0,0 +1,52 @@ +#!/bin/sh + +test_description='sparse checkout scope tests' + +. ./test-lib.sh + +test_expect_success 'setup' ' + echo "initial" >a && + echo "initial" >b && + echo "initial" >c && + git add a b c && + git commit -m "initial commit" +' + +test_expect_success 'create feature branch' ' + git checkout -b feature && + echo "modified" >b && + echo "modified" >c && + git add b c && + git commit -m "modification" +' + +test_expect_success 'perform sparse checkout of master' ' + git config --local --bool core.sparsecheckout true && + echo "!/*" >.git/info/sparse-checkout && + echo "/a" >>.git/info/sparse-checkout && + echo "/c" >>.git/info/sparse-checkout && + git checkout master && + test_path_is_file a && + test_path_is_missing b && + test_path_is_file c +' + +test_expect_success 'merge feature branch into sparse checkout of master' ' + git merge feature && + test_path_is_file a && + test_path_is_missing b && + test_path_is_file c && + test "$(cat c)" = "modified" +' + +test_expect_success 'return to full checkout of master' ' + git checkout feature && + echo "/*" >.git/info/sparse-checkout && + git checkout master && + test_path_is_file a && + test_path_is_file b && + test_path_is_file c && + test "$(cat b)" = "modified" +' + +test_done diff --git a/t/t1100-commit-tree-options.sh b/t/t1100-commit-tree-options.sh index f8457f9d14..ae66ba5bab 100755 --- a/t/t1100-commit-tree-options.sh +++ b/t/t1100-commit-tree-options.sh @@ -15,7 +15,7 @@ Also make sure that command line parser understands the normal . ./test-lib.sh cat >expected <<EOF -tree 4b825dc642cb6eb9a060e54bf8d69288fbee4904 +tree $EMPTY_TREE author Author Name <author@email> 1117148400 +0000 committer Committer Name <committer@email> 1117150200 +0000 @@ -35,11 +35,11 @@ test_expect_success \ GIT_COMMITTER_NAME="Committer Name" \ GIT_COMMITTER_EMAIL="committer@email" \ GIT_COMMITTER_DATE="2005-05-26 23:30" \ - TZ=GMT git commit-tree `cat treeid` >commitid 2>/dev/null' + TZ=GMT git commit-tree $(cat treeid) >commitid 2>/dev/null' test_expect_success \ 'read commit' \ - 'git cat-file commit `cat commitid` >commit' + 'git cat-file commit $(cat commitid) >commit' test_expect_success \ 'compare commit' \ diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 66dd28644f..923bfc5a26 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -353,6 +353,18 @@ test_expect_success '--list without repo produces empty output' ' ' cat > expect << EOF +beta.noindent +nextsection.nonewline +123456.a123 +version.1.2.3eX.alpha +EOF + +test_expect_success '--name-only --list' ' + git config --name-only --list >output && + test_cmp expect output +' + +cat > expect << EOF beta.noindent sillyValue nextsection.nonewline wow2 for me EOF @@ -363,6 +375,16 @@ test_expect_success '--get-regexp' ' ' cat > expect << EOF +beta.noindent +nextsection.nonewline +EOF + +test_expect_success '--name-only --get-regexp' ' + git config --name-only --get-regexp in >output && + test_cmp expect output +' + +cat > expect << EOF wow2 for me wow4 for you EOF @@ -677,11 +699,13 @@ test_expect_success 'invalid unit' ' echo 1auto >expect && git config aninvalid.unit >actual && test_cmp expect actual && - cat >expect <<-\EOF && - fatal: bad numeric config value '\''1auto'\'' for '\''aninvalid.unit'\'' in .git/config: invalid unit - EOF test_must_fail git config --int --get aninvalid.unit 2>actual && - test_i18ncmp expect actual + test_i18ngrep "bad numeric config value .1auto. for .aninvalid.unit. in file .git/config: invalid unit" actual +' + +test_expect_success 'invalid stdin config' ' + echo "[broken" | test_must_fail git config --list --file - >output 2>&1 && + test_i18ngrep "bad config line 1 in standard input" output ' cat > expect << EOF @@ -862,7 +886,7 @@ test_expect_success !MINGW 'get --path copes with unset $HOME' ' git config --get --path path.normal >>result && git config --get --path path.trailingtilde >>result ) && - grep "[Ff]ailed to expand.*~/" msg && + test_i18ngrep "[Ff]ailed to expand.*~/" msg && test_cmp expect result ' @@ -935,13 +959,15 @@ Qsection.sub=section.val4 Qsection.sub=section.val5Q EOF test_expect_success '--null --list' ' - git config --null --list | nul_to_q >result && + git config --null --list >result.raw && + nul_to_q <result.raw >result && echo >>result && test_cmp expect result ' test_expect_success '--null --get-regexp' ' - git config --null --get-regexp "val[0-9]" | nul_to_q >result && + git config --null --get-regexp "val[0-9]" >result.raw && + nul_to_q <result.raw >result && echo >>result && test_cmp expect result ' @@ -1061,6 +1087,20 @@ test_expect_success 'git -c complains about empty key and value' ' test_must_fail git -c "" rev-parse ' +test_expect_success 'multiple git -c appends config' ' + test_config alias.x "!git -c x.two=2 config --get-regexp ^x\.*" && + cat >expect <<-\EOF && + x.one 1 + x.two 2 + EOF + git -c x.one=1 x >actual && + test_cmp expect actual +' + +test_expect_success 'git -c is not confused by empty environment' ' + GIT_CONFIG_PARAMETERS="" git -c x.one=1 config --list +' + test_expect_success 'git config --edit works' ' git config -f tmp test.value no && echo test.value=yes >expect && @@ -1086,7 +1126,7 @@ test_expect_success 'barf on syntax error' ' key garbage EOF test_must_fail git config --get section.key >actual 2>error && - grep " line 3 " error + test_i18ngrep " line 3 " error ' test_expect_success 'barf on incomplete section header' ' @@ -1096,7 +1136,7 @@ test_expect_success 'barf on incomplete section header' ' key = value EOF test_must_fail git config --get section.key >actual 2>error && - grep " line 2 " error + test_i18ngrep " line 2 " error ' test_expect_success 'barf on incomplete string' ' @@ -1106,7 +1146,7 @@ test_expect_success 'barf on incomplete string' ' key = "value string EOF test_must_fail git config --get section.key >actual 2>error && - grep " line 3 " error + test_i18ngrep " line 3 " error ' test_expect_success 'urlmatch' ' @@ -1118,6 +1158,9 @@ test_expect_success 'urlmatch' ' cookieFile = /tmp/cookie.txt EOF + test_expect_code 1 git config --bool --get-urlmatch doesnt.exist https://good.example.com >actual && + test_must_be_empty actual && + echo true >expect && git config --bool --get-urlmatch http.SSLverify https://good.example.com >actual && test_cmp expect actual && @@ -1179,4 +1222,154 @@ test_expect_success POSIXPERM,PERL 'preserves existing permissions' ' "die q(badrename) if ((stat(q(.git/config)))[2] & 07777) != 0600" ' +! test_have_prereq MINGW || +HOME="$(pwd)" # convert to Windows path + +test_expect_success 'set up --show-origin tests' ' + INCLUDE_DIR="$HOME/include" && + mkdir -p "$INCLUDE_DIR" && + cat >"$INCLUDE_DIR"/absolute.include <<-\EOF && + [user] + absolute = include + EOF + cat >"$INCLUDE_DIR"/relative.include <<-\EOF && + [user] + relative = include + EOF + cat >"$HOME"/.gitconfig <<-EOF && + [user] + global = true + override = global + [include] + path = "$INCLUDE_DIR/absolute.include" + EOF + cat >.git/config <<-\EOF + [user] + local = true + override = local + [include] + path = ../include/relative.include + EOF +' + +test_expect_success '--show-origin with --list' ' + cat >expect <<-EOF && + file:$HOME/.gitconfig user.global=true + file:$HOME/.gitconfig user.override=global + file:$HOME/.gitconfig include.path=$INCLUDE_DIR/absolute.include + file:$INCLUDE_DIR/absolute.include user.absolute=include + file:.git/config user.local=true + file:.git/config user.override=local + file:.git/config include.path=../include/relative.include + file:.git/../include/relative.include user.relative=include + command line: user.cmdline=true + EOF + git -c user.cmdline=true config --list --show-origin >output && + test_cmp expect output +' + +test_expect_success '--show-origin with --list --null' ' + cat >expect <<-EOF && + file:$HOME/.gitconfigQuser.global + trueQfile:$HOME/.gitconfigQuser.override + globalQfile:$HOME/.gitconfigQinclude.path + $INCLUDE_DIR/absolute.includeQfile:$INCLUDE_DIR/absolute.includeQuser.absolute + includeQfile:.git/configQuser.local + trueQfile:.git/configQuser.override + localQfile:.git/configQinclude.path + ../include/relative.includeQfile:.git/../include/relative.includeQuser.relative + includeQcommand line:Quser.cmdline + trueQ + EOF + git -c user.cmdline=true config --null --list --show-origin >output.raw && + nul_to_q <output.raw >output && + # The here-doc above adds a newline that the --null output would not + # include. Add it here to make the two comparable. + echo >>output && + test_cmp expect output +' + +test_expect_success '--show-origin with single file' ' + cat >expect <<-\EOF && + file:.git/config user.local=true + file:.git/config user.override=local + file:.git/config include.path=../include/relative.include + EOF + git config --local --list --show-origin >output && + test_cmp expect output +' + +test_expect_success '--show-origin with --get-regexp' ' + cat >expect <<-EOF && + file:$HOME/.gitconfig user.global true + file:.git/config user.local true + EOF + git config --show-origin --get-regexp "user\.[g|l].*" >output && + test_cmp expect output +' + +test_expect_success '--show-origin getting a single key' ' + cat >expect <<-\EOF && + file:.git/config local + EOF + git config --show-origin user.override >output && + test_cmp expect output +' + +test_expect_success 'set up custom config file' ' + CUSTOM_CONFIG_FILE="file\" (dq) and spaces.conf" && + cat >"$CUSTOM_CONFIG_FILE" <<-\EOF + [user] + custom = true + EOF +' + +test_expect_success !MINGW '--show-origin escape special file name characters' ' + cat >expect <<-\EOF && + file:"file\" (dq) and spaces.conf" user.custom=true + EOF + git config --file "$CUSTOM_CONFIG_FILE" --show-origin --list >output && + test_cmp expect output +' + +test_expect_success '--show-origin stdin' ' + cat >expect <<-\EOF && + standard input: user.custom=true + EOF + git config --file - --show-origin --list <"$CUSTOM_CONFIG_FILE" >output && + test_cmp expect output +' + +test_expect_success '--show-origin stdin with file include' ' + cat >"$INCLUDE_DIR"/stdin.include <<-EOF && + [user] + stdin = include + EOF + cat >expect <<-EOF && + file:$INCLUDE_DIR/stdin.include include + EOF + echo "[include]path=\"$INCLUDE_DIR\"/stdin.include" \ + | git config --show-origin --includes --file - user.stdin >output && + test_cmp expect output +' + +test_expect_success !MINGW '--show-origin blob' ' + cat >expect <<-\EOF && + blob:a9d9f9e555b5c6f07cbe09d3f06fe3df11e09c08 user.custom=true + EOF + blob=$(git hash-object -w "$CUSTOM_CONFIG_FILE") && + git config --blob=$blob --show-origin --list >output && + test_cmp expect output +' + +test_expect_success !MINGW '--show-origin blob ref' ' + cat >expect <<-\EOF && + blob:"master:file\" (dq) and spaces.conf" user.custom=true + EOF + git add "$CUSTOM_CONFIG_FILE" && + git commit -m "new config file" && + git config --blob=master:"$CUSTOM_CONFIG_FILE" --show-origin --list >output && + test_cmp expect output +' + test_done diff --git a/t/t1301-shared-repo.sh b/t/t1301-shared-repo.sh index ac10875408..1312004f8c 100755 --- a/t/t1301-shared-repo.sh +++ b/t/t1301-shared-repo.sh @@ -172,4 +172,45 @@ test_expect_success POSIXPERM 'forced modes' ' }" actual)" ' +test_expect_success POSIXPERM 'remote init does not use config from cwd' ' + git config core.sharedrepository 0666 && + umask 0022 && + git init --bare child.git && + echo "-rw-r--r--" >expect && + modebits child.git/config >actual && + test_cmp expect actual +' + +test_expect_success POSIXPERM 're-init respects core.sharedrepository (local)' ' + git config core.sharedrepository 0666 && + umask 0022 && + echo whatever >templates/foo && + git init --template=templates && + echo "-rw-rw-rw-" >expect && + modebits .git/foo >actual && + test_cmp expect actual +' + +test_expect_success POSIXPERM 're-init respects core.sharedrepository (remote)' ' + rm -rf child.git && + umask 0022 && + git init --bare --shared=0666 child.git && + test_path_is_missing child.git/foo && + git init --bare --template=../templates child.git && + echo "-rw-rw-rw-" >expect && + modebits child.git/foo >actual && + test_cmp expect actual +' + +test_expect_success POSIXPERM 'template can set core.sharedrepository' ' + rm -rf child.git && + umask 0022 && + git config core.sharedrepository 0666 && + cp .git/config templates/config && + git init --bare --template=../templates child.git && + echo "-rw-rw-rw-" >expect && + modebits child.git/HEAD >actual && + test_cmp expect actual +' + test_done diff --git a/t/t1302-repo-version.sh b/t/t1302-repo-version.sh index 0d9388afc4..ce4cff13bb 100755 --- a/t/t1302-repo-version.sh +++ b/t/t1302-repo-version.sh @@ -25,46 +25,86 @@ test_expect_success 'setup' ' test_expect_success 'gitdir selection on normal repos' ' echo 0 >expect && git config core.repositoryformatversion >actual && - ( - cd test && - git config core.repositoryformatversion >../actual2 - ) && + git -C test config core.repositoryformatversion >actual2 && test_cmp expect actual && test_cmp expect actual2 ' test_expect_success 'gitdir selection on unsupported repo' ' # Make sure it would stop at test2, not trash - echo 99 >expect && - ( - cd test2 && - git config core.repositoryformatversion >../actual - ) && - test_cmp expect actual + test_expect_code 1 git -C test2 config core.repositoryformatversion >actual ' test_expect_success 'gitdir not required mode' ' git apply --stat test.patch && - ( - cd test && - git apply --stat ../test.patch - ) && - ( - cd test2 && - git apply --stat ../test.patch - ) + git -C test apply --stat ../test.patch && + git -C test2 apply --stat ../test.patch ' test_expect_success 'gitdir required mode' ' git apply --check --index test.patch && - ( - cd test && - git apply --check --index ../test.patch - ) && - ( - cd test2 && - test_must_fail git apply --check --index ../test.patch - ) + git -C test apply --check --index ../test.patch && + test_must_fail git -C test2 apply --check --index ../test.patch +' + +check_allow () { + git rev-parse --git-dir >actual && + echo .git >expect && + test_cmp expect actual +} + +check_abort () { + test_must_fail git rev-parse --git-dir +} + +# avoid git-config, since it cannot be trusted to run +# in a repository with a broken version +mkconfig () { + echo '[core]' && + echo "repositoryformatversion = $1" && + shift && + + if test $# -gt 0; then + echo '[extensions]' && + for i in "$@"; do + echo "$i" + done + fi +} + +while read outcome version extensions; do + test_expect_success "$outcome version=$version $extensions" " + mkconfig $version $extensions >.git/config && + check_${outcome} + " +done <<\EOF +allow 0 +allow 1 +allow 1 noop +abort 1 no-such-extension +allow 0 no-such-extension +EOF + +test_expect_success 'precious-objects allowed' ' + mkconfig 1 preciousObjects >.git/config && + check_allow +' + +test_expect_success 'precious-objects blocks destructive repack' ' + test_must_fail git repack -ad +' + +test_expect_success 'other repacks are OK' ' + test_commit foo && + git repack +' + +test_expect_success 'precious-objects blocks prune' ' + test_must_fail git prune +' + +test_expect_success 'gc runs without complaint' ' + git gc ' test_done diff --git a/t/t1307-config-blob.sh b/t/t1307-config-blob.sh index 3c6791e6be..eed31ffa30 100755 --- a/t/t1307-config-blob.sh +++ b/t/t1307-config-blob.sh @@ -61,10 +61,7 @@ test_expect_success 'parse errors in blobs are properly attributed' ' git commit -m broken && test_must_fail git config --blob=HEAD:config some.value 2>err && - - # just grep for our token as the exact error message is likely to - # change or be internationalized - grep "HEAD:config" err + test_i18ngrep "HEAD:config" err ' test_expect_success 'can parse blob ending with CR' ' diff --git a/t/t1308-config-set.sh b/t/t1308-config-set.sh index 91235b76ba..ff50960cca 100755 --- a/t/t1308-config-set.sh +++ b/t/t1308-config-set.sh @@ -195,16 +195,16 @@ test_expect_success 'proper error on error in default config files' ' cp .git/config .git/config.old && test_when_finished "mv .git/config.old .git/config" && echo "[" >>.git/config && - echo "fatal: bad config file line 34 in .git/config" >expect && + echo "fatal: bad config line 34 in file .git/config" >expect && test_expect_code 128 test-config get_value foo.bar 2>actual && - test_cmp expect actual + test_i18ncmp expect actual ' test_expect_success 'proper error on error in custom config files' ' echo "[" >>syntax-error && - echo "fatal: bad config file line 1 in syntax-error" >expect && + echo "fatal: bad config line 1 in file syntax-error" >expect && test_expect_code 128 test-config configset_get_value foo.bar syntax-error 2>actual && - test_cmp expect actual + test_i18ncmp expect actual ' test_expect_success 'check line errors for malformed values' ' @@ -218,4 +218,44 @@ test_expect_success 'check line errors for malformed values' ' test_i18ngrep "fatal: .*alias\.br.*\.git/config.*line 2" result ' +test_expect_success 'error on modifying repo config without repo' ' + nongit test_must_fail git config a.b c 2>err && + grep "not in a git directory" err +' + +cmdline_config="'foo.bar=from-cmdline'" +test_expect_success 'iteration shows correct origins' ' + echo "[foo]bar = from-repo" >.git/config && + echo "[foo]bar = from-home" >.gitconfig && + if test_have_prereq MINGW + then + # Use Windows path (i.e. *not* $HOME) + HOME_GITCONFIG=$(pwd)/.gitconfig + else + # Do not get fooled by symbolic links, i.e. $HOME != $(pwd) + HOME_GITCONFIG=$HOME/.gitconfig + fi && + cat >expect <<-EOF && + key=foo.bar + value=from-home + origin=file + name=$HOME_GITCONFIG + scope=global + + key=foo.bar + value=from-repo + origin=file + name=.git/config + scope=repo + + key=foo.bar + value=from-cmdline + origin=command line + name= + scope=cmdline + EOF + GIT_CONFIG_PARAMETERS=$cmdline_config test-config iterate >actual && + test_cmp expect actual +' + test_done diff --git a/t/t1350-config-hooks-path.sh b/t/t1350-config-hooks-path.sh new file mode 100755 index 0000000000..f1f9aee9f5 --- /dev/null +++ b/t/t1350-config-hooks-path.sh @@ -0,0 +1,43 @@ +#!/bin/sh + +test_description='Test the core.hooksPath configuration variable' + +. ./test-lib.sh + +test_expect_success 'set up a pre-commit hook in core.hooksPath' ' + mkdir -p .git/custom-hooks .git/hooks && + write_script .git/custom-hooks/pre-commit <<-\EOF && + echo CUSTOM >>actual + EOF + write_script .git/hooks/pre-commit <<-\EOF + echo NORMAL >>actual + EOF +' + +test_expect_success 'Check that various forms of specifying core.hooksPath work' ' + test_commit no_custom_hook && + git config core.hooksPath .git/custom-hooks && + test_commit have_custom_hook && + git config core.hooksPath .git/custom-hooks/ && + test_commit have_custom_hook_trailing_slash && + git config core.hooksPath "$PWD/.git/custom-hooks" && + test_commit have_custom_hook_abs_path && + git config core.hooksPath "$PWD/.git/custom-hooks/" && + test_commit have_custom_hook_abs_path_trailing_slash && + cat >expect <<-\EOF && + NORMAL + CUSTOM + CUSTOM + CUSTOM + CUSTOM + EOF + test_cmp expect actual +' + +test_expect_success 'git rev-parse --git-path hooks' ' + git config core.hooksPath .git/custom-hooks && + git rev-parse --git-path hooks/abc >actual && + test .git/custom-hooks/abc = "$(cat actual)" +' + +test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index d787bf50f8..d4fb977060 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -23,6 +23,7 @@ test_expect_success setup ' m=refs/heads/master n_dir=refs/heads/gu n=$n_dir/fixes +outside=refs/foo test_expect_success \ "create $m" \ @@ -74,6 +75,24 @@ test_expect_success "delete $m (by HEAD)" ' ' rm -f .git/$m +test_expect_success 'update-ref does not create reflogs by default' ' + test_when_finished "git update-ref -d $outside" && + git update-ref $outside $A && + git rev-parse $A >expect && + git rev-parse $outside >actual && + test_cmp expect actual && + test_must_fail git reflog exists $outside +' + +test_expect_success 'update-ref creates reflogs with --create-reflog' ' + test_when_finished "git update-ref -d $outside" && + git update-ref --create-reflog $outside $A && + git rev-parse $A >expect && + git rev-parse $outside >actual && + test_cmp expect actual && + git reflog exists $outside +' + test_expect_success \ "create $m (by HEAD)" \ "git update-ref HEAD $A && @@ -155,12 +174,11 @@ test_expect_success "(not) changed .git/$m" " ' rm -f .git/$m -: a repository with working tree always has reflog these days... -: >.git/logs/refs/heads/master +rm -f .git/logs/refs/heads/master test_expect_success \ "create $m (logged by touch)" \ 'GIT_COMMITTER_DATE="2005-05-26 23:30" \ - git update-ref HEAD '"$A"' -m "Initial Creation" && + git update-ref --create-reflog HEAD '"$A"' -m "Initial Creation" && test '"$A"' = $(cat .git/'"$m"')' test_expect_success \ "update $m (logged by touch)" \ @@ -343,7 +361,7 @@ test_expect_success 'stdin test setup' ' test_expect_success '-z fails without --stdin' ' test_must_fail git update-ref -z $m $m $m 2>err && - grep "usage: git update-ref" err + test_i18ngrep "usage: git update-ref" err ' test_expect_success 'stdin works with no input' ' @@ -461,7 +479,7 @@ test_expect_success 'stdin fails with duplicate refs' ' create $a $m EOF test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: Multiple updates for ref '"'"'$a'"'"' not allowed." err + grep "fatal: multiple updates for ref '"'"'$a'"'"' not allowed." err ' test_expect_success 'stdin create ref works' ' @@ -472,6 +490,25 @@ test_expect_success 'stdin create ref works' ' test_cmp expect actual ' +test_expect_success 'stdin does not create reflogs by default' ' + test_when_finished "git update-ref -d $outside" && + echo "create $outside $m" >stdin && + git update-ref --stdin <stdin && + git rev-parse $m >expect && + git rev-parse $outside >actual && + test_cmp expect actual && + test_must_fail git reflog exists $outside +' + +test_expect_success 'stdin creates reflogs with --create-reflog' ' + echo "create $outside $m" >stdin && + git update-ref --create-reflog --stdin <stdin && + git rev-parse $m >expect && + git rev-parse $outside >actual && + test_cmp expect actual && + git reflog exists $outside +' + test_expect_success 'stdin succeeds with quoted argument' ' git update-ref -d $a && echo "create $a \"$m\"" >stdin && @@ -843,7 +880,7 @@ test_expect_success 'stdin -z fails option with unknown name' ' test_expect_success 'stdin -z fails with duplicate refs' ' printf $F "create $a" "$m" "create $b" "$m" "create $a" "$m" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: Multiple updates for ref '"'"'$a'"'"' not allowed." err + grep "fatal: multiple updates for ref '"'"'$a'"'"' not allowed." err ' test_expect_success 'stdin -z create ref works' ' @@ -1065,6 +1102,41 @@ test_expect_success 'stdin -z delete refs works with packed and loose refs' ' test_must_fail git rev-parse --verify -q $c ' +test_expect_success 'fails with duplicate HEAD update' ' + git branch target1 $A && + git checkout target1 && + cat >stdin <<-EOF && + update refs/heads/target1 $C + option no-deref + update HEAD $B + EOF + test_must_fail git update-ref --stdin <stdin 2>err && + grep "fatal: multiple updates for '\''HEAD'\'' (including one via its referent .refs/heads/target1.) are not allowed" err && + echo "refs/heads/target1" >expect && + git symbolic-ref HEAD >actual && + test_cmp expect actual && + echo "$A" >expect && + git rev-parse refs/heads/target1 >actual && + test_cmp expect actual +' + +test_expect_success 'fails with duplicate ref update via symref' ' + git branch target2 $A && + git symbolic-ref refs/heads/symref2 refs/heads/target2 && + cat >stdin <<-EOF && + update refs/heads/target2 $C + update refs/heads/symref2 $B + EOF + test_must_fail git update-ref --stdin <stdin 2>err && + grep "fatal: multiple updates for '\''refs/heads/target2'\'' (including one via symref .refs/heads/symref2.) are not allowed" err && + echo "refs/heads/target2" >expect && + git symbolic-ref refs/heads/symref2 >actual && + test_cmp expect actual && + echo "$A" >expect && + git rev-parse refs/heads/target2 >actual && + test_cmp expect actual +' + run_with_limited_open_files () { (ulimit -n 32 && "$@") } @@ -1093,4 +1165,23 @@ test_expect_success ULIMIT_FILE_DESCRIPTORS 'large transaction deleting branches ) ' +test_expect_success 'handle per-worktree refs in refs/bisect' ' + git commit --allow-empty -m "initial commit" && + git worktree add -b branch worktree && + ( + cd worktree && + git commit --allow-empty -m "test commit" && + git for-each-ref >for-each-ref.out && + ! grep refs/bisect for-each-ref.out && + git update-ref refs/bisect/something HEAD && + git rev-parse refs/bisect/something >../worktree-head && + git for-each-ref | grep refs/bisect/something + ) && + test_path_is_missing .git/refs/bisect && + test_must_fail git rev-parse refs/bisect/something && + git update-ref refs/bisect/something HEAD && + git rev-parse refs/bisect/something >main-head && + ! test_cmp main-head worktree-head +' + test_done diff --git a/t/t1401-symbolic-ref.sh b/t/t1401-symbolic-ref.sh index 36378b0e3f..eec3e90f9c 100755 --- a/t/t1401-symbolic-ref.sh +++ b/t/t1401-symbolic-ref.sh @@ -29,22 +29,29 @@ reset_to_sane test_expect_success 'symbolic-ref refuses bare sha1' ' echo content >file && git add file && git commit -m one && - test_must_fail git symbolic-ref HEAD `git rev-parse HEAD` + test_must_fail git symbolic-ref HEAD $(git rev-parse HEAD) ' reset_to_sane -test_expect_success 'symbolic-ref deletes HEAD' ' - git symbolic-ref -d HEAD && +test_expect_success 'HEAD cannot be removed' ' + test_must_fail git symbolic-ref -d HEAD +' + +reset_to_sane + +test_expect_success 'symbolic-ref can be deleted' ' + git symbolic-ref NOTHEAD refs/heads/foo && + git symbolic-ref -d NOTHEAD && test_path_is_file .git/refs/heads/foo && - test_path_is_missing .git/HEAD + test_path_is_missing .git/NOTHEAD ' reset_to_sane -test_expect_success 'symbolic-ref deletes dangling HEAD' ' - git symbolic-ref HEAD refs/heads/missing && - git symbolic-ref -d HEAD && +test_expect_success 'symbolic-ref can delete dangling symref' ' + git symbolic-ref NOTHEAD refs/heads/missing && + git symbolic-ref -d NOTHEAD && test_path_is_missing .git/refs/heads/missing && - test_path_is_missing .git/HEAD + test_path_is_missing .git/NOTHEAD ' reset_to_sane @@ -63,4 +70,70 @@ test_expect_success 'symbolic-ref fails to delete real ref' ' ' reset_to_sane +test_expect_success 'create large ref name' ' + # make 256+ character ref; some systems may not handle that, + # so be gentle + long=0123456789abcdef && + long=$long/$long/$long/$long && + long=$long/$long/$long/$long && + long_ref=refs/heads/$long && + tree=$(git write-tree) && + commit=$(echo foo | git commit-tree $tree) && + if git update-ref $long_ref $commit; then + test_set_prereq LONG_REF + else + echo >&2 "long refs not supported" + fi +' + +test_expect_success LONG_REF 'symbolic-ref can point to large ref name' ' + git symbolic-ref HEAD $long_ref && + echo $long_ref >expect && + git symbolic-ref HEAD >actual && + test_cmp expect actual +' + +test_expect_success LONG_REF 'we can parse long symbolic ref' ' + echo $commit >expect && + git rev-parse --verify HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'symbolic-ref reports failure in exit code' ' + test_when_finished "rm -f .git/HEAD.lock" && + >.git/HEAD.lock && + test_must_fail git symbolic-ref HEAD refs/heads/whatever +' + +test_expect_success 'symbolic-ref writes reflog entry' ' + git checkout -b log1 && + test_commit one && + git checkout -b log2 && + test_commit two && + git checkout --orphan orphan && + git symbolic-ref -m create HEAD refs/heads/log1 && + git symbolic-ref -m update HEAD refs/heads/log2 && + cat >expect <<-\EOF && + update + create + EOF + git log --format=%gs -g -2 >actual && + test_cmp expect actual +' + +test_expect_success 'symbolic-ref does not create ref d/f conflicts' ' + git checkout -b df && + test_commit df && + test_must_fail git symbolic-ref refs/heads/df/conflict refs/heads/df && + git pack-refs --all --prune && + test_must_fail git symbolic-ref refs/heads/df/conflict refs/heads/df +' + +test_expect_success 'symbolic-ref handles existing pointer to invalid name' ' + head=$(git rev-parse HEAD) && + git symbolic-ref HEAD refs/heads/outer && + git update-ref refs/heads/outer/inner $head && + git symbolic-ref HEAD refs/heads/unrelated +' + test_done diff --git a/t/t1402-check-ref-format.sh b/t/t1402-check-ref-format.sh index e5dc62e9ef..0790edf60d 100755 --- a/t/t1402-check-ref-format.sh +++ b/t/t1402-check-ref-format.sh @@ -62,9 +62,11 @@ invalid_ref 'heads/foo\bar' invalid_ref "$(printf 'heads/foo\t')" invalid_ref "$(printf 'heads/foo\177')" valid_ref "$(printf 'heads/fu\303\237')" -invalid_ref 'heads/*foo/bar' --refspec-pattern -invalid_ref 'heads/foo*/bar' --refspec-pattern -invalid_ref 'heads/f*o/bar' --refspec-pattern +valid_ref 'heads/*foo/bar' --refspec-pattern +valid_ref 'heads/foo*/bar' --refspec-pattern +valid_ref 'heads/f*o/bar' --refspec-pattern +invalid_ref 'heads/f*o*/bar' --refspec-pattern +invalid_ref 'heads/foo*/bar*' --refspec-pattern ref='foo' invalid_ref "$ref" diff --git a/t/t1404-update-ref-df-conflicts.sh b/t/t1404-update-ref-df-conflicts.sh deleted file mode 100755 index 66bafb5cf4..0000000000 --- a/t/t1404-update-ref-df-conflicts.sh +++ /dev/null @@ -1,107 +0,0 @@ -#!/bin/sh - -test_description='Test git update-ref with D/F conflicts' -. ./test-lib.sh - -test_update_rejected () { - prefix="$1" && - before="$2" && - pack="$3" && - create="$4" && - error="$5" && - printf "create $prefix/%s $C\n" $before | - git update-ref --stdin && - git for-each-ref $prefix >unchanged && - if $pack - then - git pack-refs --all - fi && - printf "create $prefix/%s $C\n" $create >input && - test_must_fail git update-ref --stdin <input 2>output.err && - grep -F "$error" output.err && - git for-each-ref $prefix >actual && - test_cmp unchanged actual -} - -Q="'" - -test_expect_success 'setup' ' - - git commit --allow-empty -m Initial && - C=$(git rev-parse HEAD) - -' - -test_expect_success 'existing loose ref is a simple prefix of new' ' - - prefix=refs/1l && - test_update_rejected $prefix "a c e" false "b c/x d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" - -' - -test_expect_success 'existing packed ref is a simple prefix of new' ' - - prefix=refs/1p && - test_update_rejected $prefix "a c e" true "b c/x d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" - -' - -test_expect_success 'existing loose ref is a deeper prefix of new' ' - - prefix=refs/2l && - test_update_rejected $prefix "a c e" false "b c/x/y d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" - -' - -test_expect_success 'existing packed ref is a deeper prefix of new' ' - - prefix=refs/2p && - test_update_rejected $prefix "a c e" true "b c/x/y d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" - -' - -test_expect_success 'new ref is a simple prefix of existing loose' ' - - prefix=refs/3l && - test_update_rejected $prefix "a c/x e" false "b c d" \ - "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" - -' - -test_expect_success 'new ref is a simple prefix of existing packed' ' - - prefix=refs/3p && - test_update_rejected $prefix "a c/x e" true "b c d" \ - "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" - -' - -test_expect_success 'new ref is a deeper prefix of existing loose' ' - - prefix=refs/4l && - test_update_rejected $prefix "a c/x/y e" false "b c d" \ - "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" - -' - -test_expect_success 'new ref is a deeper prefix of existing packed' ' - - prefix=refs/4p && - test_update_rejected $prefix "a c/x/y e" true "b c d" \ - "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" - -' - -test_expect_success 'one new ref is a simple prefix of another' ' - - prefix=refs/5 && - test_update_rejected $prefix "a e" false "b c c/x d" \ - "cannot process $Q$prefix/c$Q and $Q$prefix/c/x$Q at the same time" - -' - -test_done diff --git a/t/t1404-update-ref-errors.sh b/t/t1404-update-ref-errors.sh new file mode 100755 index 0000000000..c34ece48f5 --- /dev/null +++ b/t/t1404-update-ref-errors.sh @@ -0,0 +1,407 @@ +#!/bin/sh + +test_description='Test git update-ref error handling' +. ./test-lib.sh + +# Create some references, perhaps run pack-refs --all, then try to +# create some more references. Ensure that the second creation fails +# with the correct error message. +# Usage: test_update_rejected <before> <pack> <create> <error> +# <before> is a ws-separated list of refs to create before the test +# <pack> (true or false) tells whether to pack the refs before the test +# <create> is a list of variables to attempt creating +# <error> is a string to look for in the stderr of update-ref. +# All references are created in the namespace specified by the current +# value of $prefix. +test_update_rejected () { + before="$1" && + pack="$2" && + create="$3" && + error="$4" && + printf "create $prefix/%s $C\n" $before | + git update-ref --stdin && + git for-each-ref $prefix >unchanged && + if $pack + then + git pack-refs --all + fi && + printf "create $prefix/%s $C\n" $create >input && + test_must_fail git update-ref --stdin <input 2>output.err && + grep -F "$error" output.err && + git for-each-ref $prefix >actual && + test_cmp unchanged actual +} + +Q="'" + +test_expect_success 'setup' ' + + git commit --allow-empty -m Initial && + C=$(git rev-parse HEAD) && + git commit --allow-empty -m Second && + D=$(git rev-parse HEAD) && + git commit --allow-empty -m Third && + E=$(git rev-parse HEAD) +' + +test_expect_success 'existing loose ref is a simple prefix of new' ' + + prefix=refs/1l && + test_update_rejected "a c e" false "b c/x d" \ + "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" + +' + +test_expect_success 'existing packed ref is a simple prefix of new' ' + + prefix=refs/1p && + test_update_rejected "a c e" true "b c/x d" \ + "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" + +' + +test_expect_success 'existing loose ref is a deeper prefix of new' ' + + prefix=refs/2l && + test_update_rejected "a c e" false "b c/x/y d" \ + "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" + +' + +test_expect_success 'existing packed ref is a deeper prefix of new' ' + + prefix=refs/2p && + test_update_rejected "a c e" true "b c/x/y d" \ + "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" + +' + +test_expect_success 'new ref is a simple prefix of existing loose' ' + + prefix=refs/3l && + test_update_rejected "a c/x e" false "b c d" \ + "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" + +' + +test_expect_success 'new ref is a simple prefix of existing packed' ' + + prefix=refs/3p && + test_update_rejected "a c/x e" true "b c d" \ + "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" + +' + +test_expect_success 'new ref is a deeper prefix of existing loose' ' + + prefix=refs/4l && + test_update_rejected "a c/x/y e" false "b c d" \ + "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" + +' + +test_expect_success 'new ref is a deeper prefix of existing packed' ' + + prefix=refs/4p && + test_update_rejected "a c/x/y e" true "b c d" \ + "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" + +' + +test_expect_success 'one new ref is a simple prefix of another' ' + + prefix=refs/5 && + test_update_rejected "a e" false "b c c/x d" \ + "cannot process $Q$prefix/c$Q and $Q$prefix/c/x$Q at the same time" + +' + +test_expect_success 'empty directory should not fool rev-parse' ' + prefix=refs/e-rev-parse && + git update-ref $prefix/foo $C && + git pack-refs --all && + mkdir -p .git/$prefix/foo/bar/baz && + echo "$C" >expected && + git rev-parse $prefix/foo >actual && + test_cmp expected actual +' + +test_expect_success 'empty directory should not fool for-each-ref' ' + prefix=refs/e-for-each-ref && + git update-ref $prefix/foo $C && + git for-each-ref $prefix >expected && + git pack-refs --all && + mkdir -p .git/$prefix/foo/bar/baz && + git for-each-ref $prefix >actual && + test_cmp expected actual +' + +test_expect_success 'empty directory should not fool create' ' + prefix=refs/e-create && + mkdir -p .git/$prefix/foo/bar/baz && + printf "create %s $C\n" $prefix/foo | + git update-ref --stdin +' + +test_expect_success 'empty directory should not fool verify' ' + prefix=refs/e-verify && + git update-ref $prefix/foo $C && + git pack-refs --all && + mkdir -p .git/$prefix/foo/bar/baz && + printf "verify %s $C\n" $prefix/foo | + git update-ref --stdin +' + +test_expect_success 'empty directory should not fool 1-arg update' ' + prefix=refs/e-update-1 && + git update-ref $prefix/foo $C && + git pack-refs --all && + mkdir -p .git/$prefix/foo/bar/baz && + printf "update %s $D\n" $prefix/foo | + git update-ref --stdin +' + +test_expect_success 'empty directory should not fool 2-arg update' ' + prefix=refs/e-update-2 && + git update-ref $prefix/foo $C && + git pack-refs --all && + mkdir -p .git/$prefix/foo/bar/baz && + printf "update %s $D $C\n" $prefix/foo | + git update-ref --stdin +' + +test_expect_success 'empty directory should not fool 0-arg delete' ' + prefix=refs/e-delete-0 && + git update-ref $prefix/foo $C && + git pack-refs --all && + mkdir -p .git/$prefix/foo/bar/baz && + printf "delete %s\n" $prefix/foo | + git update-ref --stdin +' + +test_expect_success 'empty directory should not fool 1-arg delete' ' + prefix=refs/e-delete-1 && + git update-ref $prefix/foo $C && + git pack-refs --all && + mkdir -p .git/$prefix/foo/bar/baz && + printf "delete %s $C\n" $prefix/foo | + git update-ref --stdin +' + +# Test various errors when reading the old values of references... + +test_expect_success 'missing old value blocks update' ' + prefix=refs/missing-update && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q + EOF + printf "%s\n" "update $prefix/foo $E $D" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'incorrect old value blocks update' ' + prefix=refs/incorrect-update && + git update-ref $prefix/foo $C && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/foo$Q: is at $C but expected $D + EOF + printf "%s\n" "update $prefix/foo $E $D" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'existing old value blocks create' ' + prefix=refs/existing-create && + git update-ref $prefix/foo $C && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/foo$Q: reference already exists + EOF + printf "%s\n" "create $prefix/foo $E" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'incorrect old value blocks delete' ' + prefix=refs/incorrect-delete && + git update-ref $prefix/foo $C && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/foo$Q: is at $C but expected $D + EOF + printf "%s\n" "delete $prefix/foo $D" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'missing old value blocks indirect update' ' + prefix=refs/missing-indirect-update && + git symbolic-ref $prefix/symref $prefix/foo && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q + EOF + printf "%s\n" "update $prefix/symref $E $D" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'incorrect old value blocks indirect update' ' + prefix=refs/incorrect-indirect-update && + git symbolic-ref $prefix/symref $prefix/foo && + git update-ref $prefix/foo $C && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + EOF + printf "%s\n" "update $prefix/symref $E $D" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'existing old value blocks indirect create' ' + prefix=refs/existing-indirect-create && + git symbolic-ref $prefix/symref $prefix/foo && + git update-ref $prefix/foo $C && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: reference already exists + EOF + printf "%s\n" "create $prefix/symref $E" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'incorrect old value blocks indirect delete' ' + prefix=refs/incorrect-indirect-delete && + git symbolic-ref $prefix/symref $prefix/foo && + git update-ref $prefix/foo $C && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + EOF + printf "%s\n" "delete $prefix/symref $D" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'missing old value blocks indirect no-deref update' ' + prefix=refs/missing-noderef-update && + git symbolic-ref $prefix/symref $prefix/foo && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: reference is missing but expected $D + EOF + printf "%s\n" "option no-deref" "update $prefix/symref $E $D" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'incorrect old value blocks indirect no-deref update' ' + prefix=refs/incorrect-noderef-update && + git symbolic-ref $prefix/symref $prefix/foo && + git update-ref $prefix/foo $C && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + EOF + printf "%s\n" "option no-deref" "update $prefix/symref $E $D" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'existing old value blocks indirect no-deref create' ' + prefix=refs/existing-noderef-create && + git symbolic-ref $prefix/symref $prefix/foo && + git update-ref $prefix/foo $C && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: reference already exists + EOF + printf "%s\n" "option no-deref" "create $prefix/symref $E" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'incorrect old value blocks indirect no-deref delete' ' + prefix=refs/incorrect-noderef-delete && + git symbolic-ref $prefix/symref $prefix/foo && + git update-ref $prefix/foo $C && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + EOF + printf "%s\n" "option no-deref" "delete $prefix/symref $D" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'non-empty directory blocks create' ' + prefix=refs/ne-create && + mkdir -p .git/$prefix/foo/bar && + : >.git/$prefix/foo/bar/baz.lock && + test_when_finished "rm -f .git/$prefix/foo/bar/baz.lock" && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/foo$Q: there is a non-empty directory $Q.git/$prefix/foo$Q blocking reference $Q$prefix/foo$Q + EOF + printf "%s\n" "update $prefix/foo $C" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q + EOF + printf "%s\n" "update $prefix/foo $D $C" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'broken reference blocks create' ' + prefix=refs/broken-create && + mkdir -p .git/$prefix && + echo "gobbledigook" >.git/$prefix/foo && + test_when_finished "rm -f .git/$prefix/foo" && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + EOF + printf "%s\n" "update $prefix/foo $C" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + EOF + printf "%s\n" "update $prefix/foo $D $C" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'non-empty directory blocks indirect create' ' + prefix=refs/ne-indirect-create && + git symbolic-ref $prefix/symref $prefix/foo && + mkdir -p .git/$prefix/foo/bar && + : >.git/$prefix/foo/bar/baz.lock && + test_when_finished "rm -f .git/$prefix/foo/bar/baz.lock" && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: there is a non-empty directory $Q.git/$prefix/foo$Q blocking reference $Q$prefix/foo$Q + EOF + printf "%s\n" "update $prefix/symref $C" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q + EOF + printf "%s\n" "update $prefix/symref $D $C" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_expect_success 'broken reference blocks indirect create' ' + prefix=refs/broken-indirect-create && + git symbolic-ref $prefix/symref $prefix/foo && + echo "gobbledigook" >.git/$prefix/foo && + test_when_finished "rm -f .git/$prefix/foo" && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + EOF + printf "%s\n" "update $prefix/symref $C" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err && + cat >expected <<-EOF && + fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + EOF + printf "%s\n" "update $prefix/symref $D $C" | + test_must_fail git update-ref --stdin 2>output.err && + test_cmp expected output.err +' + +test_done diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 779d4e3829..553e26d9ce 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -62,18 +62,18 @@ test_expect_success setup ' git add . && test_tick && git commit -m rabbit && - H=`git rev-parse --verify HEAD` && - A=`git rev-parse --verify HEAD:A` && - B=`git rev-parse --verify HEAD:A/B` && - C=`git rev-parse --verify HEAD:C` && - D=`git rev-parse --verify HEAD:A/D` && - E=`git rev-parse --verify HEAD:A/B/E` && + H=$(git rev-parse --verify HEAD) && + A=$(git rev-parse --verify HEAD:A) && + B=$(git rev-parse --verify HEAD:A/B) && + C=$(git rev-parse --verify HEAD:C) && + D=$(git rev-parse --verify HEAD:A/D) && + E=$(git rev-parse --verify HEAD:A/B/E) && check_fsck && test_chmod +x C && git add C && test_tick && git commit -m dragon && - L=`git rev-parse --verify HEAD` && + L=$(git rev-parse --verify HEAD) && check_fsck && rm -f C A/B/E && @@ -81,15 +81,15 @@ test_expect_success setup ' echo horse >A/G && git add F A/G && test_tick && git commit -a -m sheep && - F=`git rev-parse --verify HEAD:F` && - G=`git rev-parse --verify HEAD:A/G` && - I=`git rev-parse --verify HEAD:A` && - J=`git rev-parse --verify HEAD` && + F=$(git rev-parse --verify HEAD:F) && + G=$(git rev-parse --verify HEAD:A/G) && + I=$(git rev-parse --verify HEAD:A) && + J=$(git rev-parse --verify HEAD) && check_fsck && rm -f A/G && test_tick && git commit -a -m monkey && - K=`git rev-parse --verify HEAD` && + K=$(git rev-parse --verify HEAD) && check_fsck && check_have A B C D E F G H I J K L && @@ -100,7 +100,8 @@ test_expect_success setup ' check_fsck && - test_line_count = 4 .git/logs/refs/heads/master + git reflog refs/heads/master >output && + test_line_count = 4 output ' test_expect_success rewind ' @@ -116,7 +117,8 @@ test_expect_success rewind ' check_have A B C D E F G H I J K L && - test_line_count = 5 .git/logs/refs/heads/master + git reflog refs/heads/master >output && + test_line_count = 5 output ' test_expect_success 'corrupt and check' ' @@ -134,7 +136,8 @@ test_expect_success 'reflog expire --dry-run should not touch reflog' ' --stale-fix \ --all && - test_line_count = 5 .git/logs/refs/heads/master && + git reflog refs/heads/master >output && + test_line_count = 5 output && check_fsck "missing blob $F" ' @@ -147,7 +150,8 @@ test_expect_success 'reflog expire' ' --stale-fix \ --all && - test_line_count = 2 .git/logs/refs/heads/master && + git reflog refs/heads/master >output && + test_line_count = 2 output && check_fsck "dangling commit $K" ' @@ -213,7 +217,8 @@ test_expect_success 'delete' ' test_expect_success 'rewind2' ' test_tick && git reset --hard HEAD~2 && - test_line_count = 4 .git/logs/refs/heads/master + git reflog refs/heads/master >output && + test_line_count = 4 output ' test_expect_success '--expire=never' ' @@ -222,7 +227,8 @@ test_expect_success '--expire=never' ' --expire=never \ --expire-unreachable=never \ --all && - test_line_count = 4 .git/logs/refs/heads/master + git reflog refs/heads/master >output && + test_line_count = 4 output ' test_expect_success 'gc.reflogexpire=never' ' @@ -230,7 +236,8 @@ test_expect_success 'gc.reflogexpire=never' ' git config gc.reflogexpire never && git config gc.reflogexpireunreachable never && git reflog expire --verbose --all && - test_line_count = 4 .git/logs/refs/heads/master + git reflog refs/heads/master >output && + test_line_count = 4 output ' test_expect_success 'gc.reflogexpire=false' ' @@ -238,7 +245,8 @@ test_expect_success 'gc.reflogexpire=false' ' git config gc.reflogexpire false && git config gc.reflogexpireunreachable false && git reflog expire --verbose --all && - test_line_count = 4 .git/logs/refs/heads/master && + git reflog refs/heads/master >output && + test_line_count = 4 output && git config --unset gc.reflogexpire && git config --unset gc.reflogexpireunreachable @@ -317,4 +325,48 @@ test_expect_success 'parsing reverse reflogs at BUFSIZ boundaries' ' test_cmp expect actual ' +test_expect_success 'no segfaults for reflog containing non-commit sha1s' ' + git update-ref --create-reflog -m "Creating ref" \ + refs/tests/tree-in-reflog HEAD && + git update-ref -m "Forcing tree" refs/tests/tree-in-reflog HEAD^{tree} && + git update-ref -m "Restoring to commit" refs/tests/tree-in-reflog HEAD && + git reflog refs/tests/tree-in-reflog +' + +test_expect_failure 'reflog with non-commit entries displays all entries' ' + git reflog refs/tests/tree-in-reflog >actual && + test_line_count = 3 actual +' + +test_expect_success 'reflog expire operates on symref not referrent' ' + git branch -l the_symref && + git branch -l referrent && + git update-ref referrent HEAD && + git symbolic-ref refs/heads/the_symref refs/heads/referrent && + test_when_finished "rm -f .git/refs/heads/referrent.lock" && + touch .git/refs/heads/referrent.lock && + git reflog expire --expire=all the_symref +' + +test_expect_success 'continue walking past root commits' ' + git init orphanage && + ( + cd orphanage && + cat >expect <<-\EOF && + HEAD@{0} commit (initial): orphan2-1 + HEAD@{1} commit: orphan1-2 + HEAD@{2} commit (initial): orphan1-1 + HEAD@{3} commit (initial): initial + EOF + test_commit initial && + git checkout --orphan orphan1 && + test_commit orphan1-1 && + test_commit orphan1-2 && + git checkout --orphan orphan2 && + test_commit orphan2-1 && + git log -g --format="%gd %gs" >actual && + test_cmp expect actual + ) +' + test_done diff --git a/t/t1411-reflog-show.sh b/t/t1411-reflog-show.sh index 6f47c0dd0e..6ac7734d79 100755 --- a/t/t1411-reflog-show.sh +++ b/t/t1411-reflog-show.sh @@ -138,7 +138,7 @@ test_expect_success '--date magic does not override explicit @{0} syntax' ' : >expect test_expect_success 'empty reflog file' ' git branch empty && - : >.git/logs/refs/heads/empty && + git reflog expire --expire=all refs/heads/empty && git log -g empty >actual && test_cmp expect actual @@ -166,4 +166,9 @@ test_expect_success 'git log -g -p shows diffs vs. parents' ' test_cmp expect actual ' +test_expect_success 'reflog exists works' ' + git reflog exists refs/heads/master && + ! git reflog exists refs/heads/nonexistent +' + test_done diff --git a/t/t1430-bad-ref-name.sh b/t/t1430-bad-ref-name.sh index 16d0b8bd1a..8937e25e49 100755 --- a/t/t1430-bad-ref-name.sh +++ b/t/t1430-bad-ref-name.sh @@ -38,18 +38,20 @@ test_expect_success 'fast-import: fail on invalid branch name "bad[branch]name"' test_must_fail git fast-import <input ' -test_expect_success 'git branch shows badly named ref' ' +test_expect_success 'git branch shows badly named ref as warning' ' cp .git/refs/heads/master .git/refs/heads/broken...ref && test_when_finished "rm -f .git/refs/heads/broken...ref" && - git branch >output && - grep -e "broken\.\.\.ref" output + git branch >output 2>error && + test_i18ngrep -e "ignoring ref with broken name refs/heads/broken\.\.\.ref" error && + ! grep -e "broken\.\.\.ref" output ' test_expect_success 'branch -d can delete badly named ref' ' cp .git/refs/heads/master .git/refs/heads/broken...ref && test_when_finished "rm -f .git/refs/heads/broken...ref" && git branch -d broken...ref && - git branch >output && + git branch >output 2>error && + ! grep -e "broken\.\.\.ref" error && ! grep -e "broken\.\.\.ref" output ' @@ -57,7 +59,8 @@ test_expect_success 'branch -D can delete badly named ref' ' cp .git/refs/heads/master .git/refs/heads/broken...ref && test_when_finished "rm -f .git/refs/heads/broken...ref" && git branch -D broken...ref && - git branch >output && + git branch >output 2>error && + ! grep -e "broken\.\.\.ref" error && ! grep -e "broken\.\.\.ref" output ' @@ -85,7 +88,8 @@ test_expect_success 'branch -D cannot delete absolute path' ' test_expect_success 'git branch cannot create a badly named ref' ' test_when_finished "rm -f .git/refs/heads/broken...ref" && test_must_fail git branch broken...ref && - git branch >output && + git branch >output 2>error && + ! grep -e "broken\.\.\.ref" error && ! grep -e "broken\.\.\.ref" output ' @@ -95,7 +99,8 @@ test_expect_success 'branch -m cannot rename to a bad ref name' ' git branch goodref && test_must_fail git branch -m goodref broken...ref && test_cmp_rev master goodref && - git branch >output && + git branch >output 2>error && + ! grep -e "broken\.\.\.ref" error && ! grep -e "broken\.\.\.ref" output ' @@ -104,14 +109,16 @@ test_expect_failure 'branch -m can rename from a bad ref name' ' test_when_finished "rm -f .git/refs/heads/broken...ref" && git branch -m broken...ref renamed && test_cmp_rev master renamed && - git branch >output && + git branch >output 2>error && + ! grep -e "broken\.\.\.ref" error && ! grep -e "broken\.\.\.ref" output ' test_expect_success 'push cannot create a badly named ref' ' test_when_finished "rm -f .git/refs/heads/broken...ref" && test_must_fail git push "file://$(pwd)" HEAD:refs/heads/broken...ref && - git branch >output && + git branch >output 2>error && + ! grep -e "broken\.\.\.ref" error && ! grep -e "broken\.\.\.ref" output ' @@ -131,7 +138,8 @@ test_expect_failure 'push --mirror can delete badly named ref' ' cp .git/refs/heads/master .git/refs/heads/broken...ref ) && git -C src push --mirror "file://$top/dest" && - git -C dest branch >output && + git -C dest branch >output 2>error && + ! grep -e "broken\.\.\.ref" error && ! grep -e "broken\.\.\.ref" output ' @@ -139,34 +147,145 @@ test_expect_success 'rev-parse skips symref pointing to broken name' ' test_when_finished "rm -f .git/refs/heads/broken...ref" && git branch shadow one && cp .git/refs/heads/master .git/refs/heads/broken...ref && - git symbolic-ref refs/tags/shadow refs/heads/broken...ref && - + printf "ref: refs/heads/broken...ref\n" >.git/refs/tags/shadow && + test_when_finished "rm -f .git/refs/tags/shadow" && git rev-parse --verify one >expect && git rev-parse --verify shadow >actual 2>err && test_cmp expect actual && - test_i18ngrep "ignoring.*refs/tags/shadow" err + test_i18ngrep "ignoring dangling symref refs/tags/shadow" err ' -test_expect_success 'update-ref --no-deref -d can delete reference to broken name' ' - git symbolic-ref refs/heads/badname refs/heads/broken...ref && +test_expect_success 'for-each-ref emits warnings for broken names' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + printf "ref: refs/heads/broken...ref\n" >.git/refs/heads/badname && test_when_finished "rm -f .git/refs/heads/badname" && - test_path_is_file .git/refs/heads/badname && - git update-ref --no-deref -d refs/heads/badname && - test_path_is_missing .git/refs/heads/badname + printf "ref: refs/heads/master\n" >.git/refs/heads/broken...symref && + test_when_finished "rm -f .git/refs/heads/broken...symref" && + git for-each-ref >output 2>error && + ! grep -e "broken\.\.\.ref" output && + ! grep -e "badname" output && + ! grep -e "broken\.\.\.symref" output && + test_i18ngrep "ignoring ref with broken name refs/heads/broken\.\.\.ref" error && + test_i18ngrep "ignoring broken ref refs/heads/badname" error && + test_i18ngrep "ignoring ref with broken name refs/heads/broken\.\.\.symref" error ' test_expect_success 'update-ref -d can delete broken name' ' cp .git/refs/heads/master .git/refs/heads/broken...ref && test_when_finished "rm -f .git/refs/heads/broken...ref" && - git update-ref -d refs/heads/broken...ref && - git branch >output && + git update-ref -d refs/heads/broken...ref >output 2>error && + test_must_be_empty output && + test_must_be_empty error && + git branch >output 2>error && + ! grep -e "broken\.\.\.ref" error && + ! grep -e "broken\.\.\.ref" output +' + +test_expect_success 'branch -d can delete broken name' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + git branch -d broken...ref >output 2>error && + test_i18ngrep "Deleted branch broken...ref (was broken)" output && + test_must_be_empty error && + git branch >output 2>error && + ! grep -e "broken\.\.\.ref" error && ! grep -e "broken\.\.\.ref" output ' +test_expect_success 'update-ref --no-deref -d can delete symref to broken name' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + printf "ref: refs/heads/broken...ref\n" >.git/refs/heads/badname && + test_when_finished "rm -f .git/refs/heads/badname" && + git update-ref --no-deref -d refs/heads/badname >output 2>error && + test_path_is_missing .git/refs/heads/badname && + test_must_be_empty output && + test_must_be_empty error +' + +test_expect_success 'branch -d can delete symref to broken name' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + printf "ref: refs/heads/broken...ref\n" >.git/refs/heads/badname && + test_when_finished "rm -f .git/refs/heads/badname" && + git branch -d badname >output 2>error && + test_path_is_missing .git/refs/heads/badname && + test_i18ngrep "Deleted branch badname (was refs/heads/broken\.\.\.ref)" output && + test_must_be_empty error +' + +test_expect_success 'update-ref --no-deref -d can delete dangling symref to broken name' ' + printf "ref: refs/heads/broken...ref\n" >.git/refs/heads/badname && + test_when_finished "rm -f .git/refs/heads/badname" && + git update-ref --no-deref -d refs/heads/badname >output 2>error && + test_path_is_missing .git/refs/heads/badname && + test_must_be_empty output && + test_must_be_empty error +' + +test_expect_success 'branch -d can delete dangling symref to broken name' ' + printf "ref: refs/heads/broken...ref\n" >.git/refs/heads/badname && + test_when_finished "rm -f .git/refs/heads/badname" && + git branch -d badname >output 2>error && + test_path_is_missing .git/refs/heads/badname && + test_i18ngrep "Deleted branch badname (was refs/heads/broken\.\.\.ref)" output && + test_must_be_empty error +' + +test_expect_success 'update-ref -d can delete broken name through symref' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + printf "ref: refs/heads/broken...ref\n" >.git/refs/heads/badname && + test_when_finished "rm -f .git/refs/heads/badname" && + git update-ref -d refs/heads/badname >output 2>error && + test_path_is_missing .git/refs/heads/broken...ref && + test_must_be_empty output && + test_must_be_empty error +' + +test_expect_success 'update-ref --no-deref -d can delete symref with broken name' ' + printf "ref: refs/heads/master\n" >.git/refs/heads/broken...symref && + test_when_finished "rm -f .git/refs/heads/broken...symref" && + git update-ref --no-deref -d refs/heads/broken...symref >output 2>error && + test_path_is_missing .git/refs/heads/broken...symref && + test_must_be_empty output && + test_must_be_empty error +' + +test_expect_success 'branch -d can delete symref with broken name' ' + printf "ref: refs/heads/master\n" >.git/refs/heads/broken...symref && + test_when_finished "rm -f .git/refs/heads/broken...symref" && + git branch -d broken...symref >output 2>error && + test_path_is_missing .git/refs/heads/broken...symref && + test_i18ngrep "Deleted branch broken...symref (was refs/heads/master)" output && + test_must_be_empty error +' + +test_expect_success 'update-ref --no-deref -d can delete dangling symref with broken name' ' + printf "ref: refs/heads/idonotexist\n" >.git/refs/heads/broken...symref && + test_when_finished "rm -f .git/refs/heads/broken...symref" && + git update-ref --no-deref -d refs/heads/broken...symref >output 2>error && + test_path_is_missing .git/refs/heads/broken...symref && + test_must_be_empty output && + test_must_be_empty error +' + +test_expect_success 'branch -d can delete dangling symref with broken name' ' + printf "ref: refs/heads/idonotexist\n" >.git/refs/heads/broken...symref && + test_when_finished "rm -f .git/refs/heads/broken...symref" && + git branch -d broken...symref >output 2>error && + test_path_is_missing .git/refs/heads/broken...symref && + test_i18ngrep "Deleted branch broken...symref (was refs/heads/idonotexist)" output && + test_must_be_empty error +' + test_expect_success 'update-ref -d cannot delete non-ref in .git dir' ' echo precious >.git/my-private-file && echo precious >expect && - test_must_fail git update-ref -d my-private-file && + test_must_fail git update-ref -d my-private-file >output 2>error && + test_must_be_empty output && + test_i18ngrep -e "refusing to update ref with bad name" error && test_cmp expect .git/my-private-file ' diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index cfb32b6242..ee7d4736db 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -77,11 +77,31 @@ test_expect_success 'object with bad sha1' ' test_expect_success 'branch pointing to non-commit' ' git rev-parse HEAD^{tree} >.git/refs/heads/invalid && test_when_finished "git update-ref -d refs/heads/invalid" && - git fsck 2>out && + test_must_fail git fsck 2>out && cat out && grep "not a commit" out ' +test_expect_success 'HEAD link pointing at a funny object' ' + test_when_finished "mv .git/SAVED_HEAD .git/HEAD" && + mv .git/HEAD .git/SAVED_HEAD && + echo 0000000000000000000000000000000000000000 >.git/HEAD && + # avoid corrupt/broken HEAD from interfering with repo discovery + test_must_fail env GIT_DIR=.git git fsck 2>out && + cat out && + grep "detached HEAD points" out +' + +test_expect_success 'HEAD link pointing at a funny place' ' + test_when_finished "mv .git/SAVED_HEAD .git/HEAD" && + mv .git/HEAD .git/SAVED_HEAD && + echo "ref: refs/funny/place" >.git/HEAD && + # avoid corrupt/broken HEAD from interfering with repo discovery + test_must_fail env GIT_DIR=.git git fsck 2>out && + cat out && + grep "HEAD points to something strange" out +' + test_expect_success 'email without @ is okay' ' git cat-file commit HEAD >basis && sed "s/@/AT/" basis >okay && @@ -156,8 +176,19 @@ test_expect_success 'integer overflow in timestamps is reported' ' grep "error in commit $new.*integer overflow" out ' -test_expect_success 'malformatted tree object' ' - test_when_finished "git update-ref -d refs/tags/wrong" && +test_expect_success 'commit with NUL in header' ' + git cat-file commit HEAD >basis && + sed "s/author ./author Q/" <basis | q_to_nul >commit-NUL-header && + new=$(git hash-object -t commit -w --stdin <commit-NUL-header) && + test_when_finished "remove_object $new" && + git update-ref refs/heads/bogus "$new" && + test_when_finished "git update-ref -d refs/heads/bogus" && + test_must_fail git fsck 2>out && + cat out && + grep "error in commit $new.*unterminated header: NUL at offset" out +' + +test_expect_success 'tree object with duplicate entries' ' test_when_finished "remove_object \$T" && T=$( GIT_INDEX_FILE=test-index && @@ -176,6 +207,19 @@ test_expect_success 'malformatted tree object' ' grep "error in tree .*contains duplicate file entries" out ' +test_expect_success 'unparseable tree object' ' + test_when_finished "git update-ref -d refs/heads/wrong" && + test_when_finished "remove_object \$tree_sha1" && + test_when_finished "remove_object \$commit_sha1" && + tree_sha1=$(printf "100644 \0twenty-bytes-of-junk" | git hash-object -t tree --stdin -w --literally) && + commit_sha1=$(git commit-tree $tree_sha1) && + git update-ref refs/heads/wrong $commit_sha1 && + test_must_fail git fsck 2>out && + test_i18ngrep "error: empty filename in tree entry" out && + test_i18ngrep "$tree_sha1" out && + test_i18ngrep ! "fatal: empty filename in tree entry" out +' + test_expect_success 'tag pointing to nonexistent' ' cat >invalid-tag <<-\EOF && object ffffffffffffffffffffffffffffffffffffffff @@ -231,8 +275,8 @@ test_expect_success 'tag with incorrect tag name & missing tagger' ' git fsck --tags 2>out && cat >expect <<-EOF && - warning in tag $tag: invalid '\''tag'\'' name: wrong name format - warning in tag $tag: invalid format - expected '\''tagger'\'' line + warning in tag $tag: badTagName: invalid '\''tag'\'' name: wrong name format + warning in tag $tag: missingTaggerEntry: invalid format - expected '\''tagger'\'' line EOF test_cmp expect out ' @@ -256,6 +300,26 @@ test_expect_success 'tag with bad tagger' ' grep "error in tag .*: invalid author/committer" out ' +test_expect_success 'tag with NUL in header' ' + sha=$(git rev-parse HEAD) && + q_to_nul >tag-NUL-header <<-EOF && + object $sha + type commit + tag contains-Q-in-header + tagger T A Gger <tagger@example.com> 1234567890 -0000 + + This is an invalid tag. + EOF + + tag=$(git hash-object --literally -t tag -w --stdin <tag-NUL-header) && + test_when_finished "remove_object $tag" && + echo $tag >.git/refs/tags/wrong && + test_when_finished "git update-ref -d refs/tags/wrong" && + test_must_fail git fsck --tags 2>out && + cat out && + grep "error in tag $tag.*unterminated header: NUL at offset" out +' + test_expect_success 'cleaned up' ' git fsck >actual 2>&1 && test_cmp empty actual @@ -287,6 +351,17 @@ test_expect_success 'rev-list --verify-objects with bad sha1' ' grep -q "error: sha1 mismatch 63ffffffffffffffffffffffffffffffffffffff" out ' +test_expect_success 'force fsck to ignore double author' ' + git cat-file commit HEAD >basis && + sed "s/^author .*/&,&/" <basis | tr , \\n >multiple-authors && + new=$(git hash-object -t commit -w --stdin <multiple-authors) && + test_when_finished "remove_object $new" && + git update-ref refs/heads/bogus "$new" && + test_when_finished "git update-ref -d refs/heads/bogus" && + test_must_fail git fsck && + git -c fsck.multipleAuthors=ignore fsck +' + _bz='\0' _bz5="$_bz$_bz$_bz$_bz$_bz" _bz20="$_bz5$_bz5$_bz5$_bz5" @@ -364,6 +439,24 @@ test_expect_success 'fsck allows .Ňit' ' ) ' +test_expect_success 'NUL in commit' ' + rm -fr nul-in-commit && + git init nul-in-commit && + ( + cd nul-in-commit && + git commit --allow-empty -m "initial commitQNUL after message" && + git cat-file commit HEAD >original && + q_to_nul <original >munged && + git hash-object -w -t commit --stdin <munged >name && + git branch bad $(cat name) && + + test_must_fail git -c fsck.nulInCommit=error fsck 2>warn.1 && + grep nulInCommit warn.1 && + git fsck 2>warn.2 && + grep nulInCommit warn.2 + ) +' + # create a static test repo which is broken by omitting # one particular object ($1, which is looked up via rev-parse # in the new repository). @@ -420,4 +513,48 @@ test_expect_success 'fsck notices ref pointing to missing tag' ' test_must_fail git -C missing fsck ' +test_expect_success 'fsck --connectivity-only' ' + rm -rf connectivity-only && + git init connectivity-only && + ( + cd connectivity-only && + touch empty && + git add empty && + test_commit empty && + empty=.git/objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391 && + rm -f $empty && + echo invalid >$empty && + test_must_fail git fsck --strict && + git fsck --strict --connectivity-only && + tree=$(git rev-parse HEAD:) && + suffix=${tree#??} && + tree=.git/objects/${tree%$suffix}/$suffix && + rm -f $tree && + echo invalid >$tree && + test_must_fail git fsck --strict --connectivity-only + ) +' + +remove_loose_object () { + sha1="$(git rev-parse "$1")" && + remainder=${sha1#??} && + firsttwo=${sha1%$remainder} && + rm .git/objects/$firsttwo/$remainder +} + +test_expect_success 'fsck --name-objects' ' + rm -rf name-objects && + git init name-objects && + ( + cd name-objects && + test_commit julius caesar.t && + test_commit augustus && + test_commit caesar && + remove_loose_object $(git rev-parse julius:caesar.t) && + test_must_fail git fsck --name-objects >out && + tree=$(git rev-parse --verify julius:) && + grep "$tree (\(refs/heads/master\|HEAD\)@{[0-9]*}:" out + ) +' + test_done diff --git a/t/t1500-rev-parse.sh b/t/t1500-rev-parse.sh index 48ee07779d..038e24c401 100755 --- a/t/t1500-rev-parse.sh +++ b/t/t1500-rev-parse.sh @@ -3,85 +3,88 @@ test_description='test git rev-parse' . ./test-lib.sh -test_rev_parse() { - name=$1 - shift - - test_expect_success "$name: is-bare-repository" \ - "test '$1' = \"\$(git rev-parse --is-bare-repository)\"" - shift - [ $# -eq 0 ] && return - - test_expect_success "$name: is-inside-git-dir" \ - "test '$1' = \"\$(git rev-parse --is-inside-git-dir)\"" - shift - [ $# -eq 0 ] && return +# usage: [options] label is-bare is-inside-git is-inside-work prefix git-dir +test_rev_parse () { + d= + bare= + gitdir= + while : + do + case "$1" in + -C) d="$2"; shift; shift ;; + -b) case "$2" in + [tfu]*) bare="$2"; shift; shift ;; + *) error "test_rev_parse: bogus core.bare value '$2'" ;; + esac ;; + -g) gitdir="$2"; shift; shift ;; + -*) error "test_rev_parse: unrecognized option '$1'" ;; + *) break ;; + esac + done - test_expect_success "$name: is-inside-work-tree" \ - "test '$1' = \"\$(git rev-parse --is-inside-work-tree)\"" - shift - [ $# -eq 0 ] && return - - test_expect_success "$name: prefix" \ - "test '$1' = \"\$(git rev-parse --show-prefix)\"" + name=$1 shift - [ $# -eq 0 ] && return - test_expect_success "$name: git-dir" \ - "test '$1' = \"\$(git rev-parse --git-dir)\"" - shift - [ $# -eq 0 ] && return + for o in --is-bare-repository \ + --is-inside-git-dir \ + --is-inside-work-tree \ + --show-prefix \ + --git-dir + do + test $# -eq 0 && break + expect="$1" + test_expect_success "$name: $o" ' + if test -n "$gitdir" + then + test_when_finished "unset GIT_DIR" && + GIT_DIR="$gitdir" && + export GIT_DIR + fi && + + case "$bare" in + t*) test_config ${d:+-C} ${d:+"$d"} core.bare true ;; + f*) test_config ${d:+-C} ${d:+"$d"} core.bare false ;; + u*) test_unconfig ${d:+-C} ${d:+"$d"} core.bare ;; + esac && + + echo "$expect" >expect && + git ${d:+-C} ${d:+"$d"} rev-parse $o >actual && + test_cmp expect actual + ' + shift + done } -# label is-bare is-inside-git is-inside-work prefix git-dir - ROOT=$(pwd) +test_expect_success 'setup' ' + mkdir -p sub/dir work && + cp -R .git repo.git +' + test_rev_parse toplevel false false true '' .git -cd .git || exit 1 -test_rev_parse .git/ false true false '' . -cd objects || exit 1 -test_rev_parse .git/objects/ false true false '' "$ROOT/.git" -cd ../.. || exit 1 +test_rev_parse -C .git .git/ false true false '' . +test_rev_parse -C .git/objects .git/objects/ false true false '' "$ROOT/.git" -mkdir -p sub/dir || exit 1 -cd sub/dir || exit 1 -test_rev_parse subdirectory false false true sub/dir/ "$ROOT/.git" -cd ../.. || exit 1 +test_rev_parse -C sub/dir subdirectory false false true sub/dir/ "$ROOT/.git" -git config core.bare true -test_rev_parse 'core.bare = true' true false false +test_rev_parse -b t 'core.bare = true' true false false -git config --unset core.bare -test_rev_parse 'core.bare undefined' false false true +test_rev_parse -b u 'core.bare undefined' false false true -mkdir work || exit 1 -cd work || exit 1 -GIT_DIR=../.git -GIT_CONFIG="$(pwd)"/../.git/config -export GIT_DIR GIT_CONFIG -git config core.bare false -test_rev_parse 'GIT_DIR=../.git, core.bare = false' false false true '' +test_rev_parse -C work -g ../.git -b f 'GIT_DIR=../.git, core.bare = false' false false true '' -git config core.bare true -test_rev_parse 'GIT_DIR=../.git, core.bare = true' true false false '' +test_rev_parse -C work -g ../.git -b t 'GIT_DIR=../.git, core.bare = true' true false false '' -git config --unset core.bare -test_rev_parse 'GIT_DIR=../.git, core.bare undefined' false false true '' +test_rev_parse -C work -g ../.git -b u 'GIT_DIR=../.git, core.bare undefined' false false true '' -mv ../.git ../repo.git || exit 1 -GIT_DIR=../repo.git -GIT_CONFIG="$(pwd)"/../repo.git/config -git config core.bare false -test_rev_parse 'GIT_DIR=../repo.git, core.bare = false' false false true '' +test_rev_parse -C work -g ../repo.git -b f 'GIT_DIR=../repo.git, core.bare = false' false false true '' -git config core.bare true -test_rev_parse 'GIT_DIR=../repo.git, core.bare = true' true false false '' +test_rev_parse -C work -g ../repo.git -b t 'GIT_DIR=../repo.git, core.bare = true' true false false '' -git config --unset core.bare -test_rev_parse 'GIT_DIR=../repo.git, core.bare undefined' false false true '' +test_rev_parse -C work -g ../repo.git -b u 'GIT_DIR=../repo.git, core.bare undefined' false false true '' test_done diff --git a/t/t1501-worktree.sh b/t/t1501-work-tree.sh index cc5b870e58..cc5b870e58 100755 --- a/t/t1501-worktree.sh +++ b/t/t1501-work-tree.sh diff --git a/t/t1502-rev-parse-parseopt.sh b/t/t1502-rev-parse-parseopt.sh index ebe7c3b87c..310f93fd30 100755 --- a/t/t1502-rev-parse-parseopt.sh +++ b/t/t1502-rev-parse-parseopt.sh @@ -3,7 +3,40 @@ test_description='test git rev-parse --parseopt' . ./test-lib.sh -sed -e 's/^|//' >expect <<\END_EXPECT +test_expect_success 'setup optionspec' ' + sed -e "s/^|//" >optionspec <<\EOF +|some-command [options] <args>... +| +|some-command does foo and bar! +|-- +|h,help show the help +| +|foo some nifty option --foo +|bar= some cool option --bar with an argument +|b,baz a short and long option +| +| An option group Header +|C? option C with an optional argument +|d,data? short and long option with an optional argument +| +| Argument hints +|B=arg short option required argument +|bar2=arg long option required argument +|e,fuz=with-space short and long option required argument +|s?some short option optional argument +|long?data long option optional argument +|g,fluf?path short and long option optional argument +|longest=very-long-argument-hint a very long argument hint +|pair=key=value with an equals sign in the hint +|short-hint=a with a one symbol hint +| +|Extras +|extra1 line above used to cause a segfault but no longer does +EOF +' + +test_expect_success 'test --parseopt help output' ' + sed -e "s/^|//" >expect <<\END_EXPECT && |cat <<\EOF |usage: some-command [options] <args>... | @@ -28,49 +61,23 @@ sed -e 's/^|//' >expect <<\END_EXPECT | -g, --fluf[=<path>] short and long option optional argument | --longest <very-long-argument-hint> | a very long argument hint +| --pair <key=value> with an equals sign in the hint +| --short-hint <a> with a one symbol hint | |Extras | --extra1 line above used to cause a segfault but no longer does | |EOF END_EXPECT - -sed -e 's/^|//' >optionspec <<\EOF -|some-command [options] <args>... -| -|some-command does foo and bar! -|-- -|h,help show the help -| -|foo some nifty option --foo -|bar= some cool option --bar with an argument -|b,baz a short and long option -| -| An option group Header -|C? option C with an optional argument -|d,data? short and long option with an optional argument -| -| Argument hints -|B=arg short option required argument -|bar2=arg long option required argument -|e,fuz=with-space short and long option required argument -|s?some short option optional argument -|long?data long option optional argument -|g,fluf?path short and long option optional argument -|longest=very-long-argument-hint a very long argument hint -| -|Extras -|extra1 line above used to cause a segfault but no longer does -EOF - -test_expect_success 'test --parseopt help output' ' test_expect_code 129 git rev-parse --parseopt -- -h > output < optionspec && test_i18ncmp expect output ' -cat > expect <<EOF +test_expect_success 'setup expect.1' " + cat > expect <<EOF set -- --foo --bar 'ham' -b -- 'arg' EOF +" test_expect_success 'test --parseopt' ' git rev-parse --parseopt -- --foo --bar=ham --baz arg < optionspec > output && @@ -82,9 +89,11 @@ test_expect_success 'test --parseopt with mixed options and arguments' ' test_cmp expect output ' -cat > expect <<EOF +test_expect_success 'setup expect.2' " + cat > expect <<EOF set -- --foo -- 'arg' '--bar=ham' EOF +" test_expect_success 'test --parseopt with --' ' git rev-parse --parseopt -- --foo -- arg --bar=ham < optionspec > output && @@ -96,54 +105,66 @@ test_expect_success 'test --parseopt --stop-at-non-option' ' test_cmp expect output ' -cat > expect <<EOF +test_expect_success 'setup expect.3' " + cat > expect <<EOF set -- --foo -- '--' 'arg' '--bar=ham' EOF +" test_expect_success 'test --parseopt --keep-dashdash' ' git rev-parse --parseopt --keep-dashdash -- --foo -- arg --bar=ham < optionspec > output && test_cmp expect output ' -cat >expect <<EOF +test_expect_success 'setup expect.4' " + cat >expect <<EOF set -- --foo -- '--' 'arg' '--spam=ham' EOF +" test_expect_success 'test --parseopt --keep-dashdash --stop-at-non-option with --' ' git rev-parse --parseopt --keep-dashdash --stop-at-non-option -- --foo -- arg --spam=ham <optionspec >output && test_cmp expect output ' -cat > expect <<EOF +test_expect_success 'setup expect.5' " + cat > expect <<EOF set -- --foo -- 'arg' '--spam=ham' EOF +" test_expect_success 'test --parseopt --keep-dashdash --stop-at-non-option without --' ' git rev-parse --parseopt --keep-dashdash --stop-at-non-option -- --foo arg --spam=ham <optionspec >output && test_cmp expect output ' -cat > expect <<EOF +test_expect_success 'setup expect.6' " + cat > expect <<EOF set -- --foo --bar='z' --baz -C'Z' --data='A' -- 'arg' EOF +" test_expect_success 'test --parseopt --stuck-long' ' git rev-parse --parseopt --stuck-long -- --foo --bar=z -b arg -CZ -dA <optionspec >output && test_cmp expect output ' -cat > expect <<EOF +test_expect_success 'setup expect.7' " + cat > expect <<EOF set -- --data='' -C --baz -- 'arg' EOF +" test_expect_success 'test --parseopt --stuck-long and empty optional argument' ' git rev-parse --parseopt --stuck-long -- --data= arg -C -b <optionspec >output && test_cmp expect output ' -cat > expect <<EOF +test_expect_success 'setup expect.8' " + cat > expect <<EOF set -- --data --baz -- 'arg' EOF +" test_expect_success 'test --parseopt --stuck-long and long option with unset optional argument' ' git rev-parse --parseopt --stuck-long -- --data arg -b <optionspec >output && diff --git a/t/t1503-rev-parse-verify.sh b/t/t1503-rev-parse-verify.sh index 823fe1d799..492edffa9c 100755 --- a/t/t1503-rev-parse-verify.sh +++ b/t/t1503-rev-parse-verify.sh @@ -85,8 +85,7 @@ test_expect_success 'fails silently when using -q' ' test_expect_success 'fails silently when using -q with deleted reflogs' ' ref=$(git rev-parse HEAD) && - : >.git/logs/refs/test && - git update-ref -m "message for refs/test" refs/test "$ref" && + git update-ref --create-reflog -m "message for refs/test" refs/test "$ref" && git reflog delete --updateref --rewrite refs/test@{0} && test_must_fail git rev-parse -q --verify refs/test@{0} >error 2>&1 && test_must_be_empty error @@ -94,16 +93,14 @@ test_expect_success 'fails silently when using -q with deleted reflogs' ' test_expect_success 'fails silently when using -q with not enough reflogs' ' ref=$(git rev-parse HEAD) && - : >.git/logs/refs/test2 && - git update-ref -m "message for refs/test2" refs/test2 "$ref" && + git update-ref --create-reflog -m "message for refs/test2" refs/test2 "$ref" && test_must_fail git rev-parse -q --verify refs/test2@{999} >error 2>&1 && test_must_be_empty error ' test_expect_success 'succeeds silently with -q and reflogs that do not go far back enough in time' ' ref=$(git rev-parse HEAD) && - : >.git/logs/refs/test3 && - git update-ref -m "message for refs/test3" refs/test3 "$ref" && + git update-ref --create-reflog -m "message for refs/test3" refs/test3 "$ref" && git rev-parse -q --verify refs/test3@{1.year.ago} >actual 2>error && test_must_be_empty error && echo "$ref" >expect && @@ -142,4 +139,9 @@ test_expect_success 'master@{n} for various n' ' test_must_fail git rev-parse --verify master@{$Np1} ' +test_expect_success SYMLINKS 'ref resolution not confused by broken symlinks' ' + ln -s does-not-exist .git/refs/heads/broken && + test_must_fail git rev-parse --verify broken +' + test_done diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 613d9bfe1b..79a0251efa 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -106,7 +106,7 @@ test_expect_success 'incorrect revision id' ' test_must_fail git rev-parse foobar:file.txt 2>error && grep "Invalid object name '"'"'foobar'"'"'." error && test_must_fail git rev-parse foobar 2> error && - grep "unknown revision or path not in the working tree." error + test_i18ngrep "unknown revision or path not in the working tree." error ' test_expect_success 'incorrect file in sha1:path' ' @@ -166,11 +166,6 @@ test_expect_success 'relative path when cwd is outside worktree' ' grep "relative path syntax can.t be used outside working tree." error ' -test_expect_success 'relative path when startup_info is NULL' ' - test_must_fail test-match-trees HEAD:./file.txt HEAD:./file.txt 2>error && - grep "BUG: startup_info struct is not initialized." error -' - test_expect_success '<commit>:file correctly diagnosed after a pathname' ' test_must_fail git rev-parse file.txt HEAD:file.txt 1>actual 2>error && test_i18ngrep ! "exists on disk" error && diff --git a/t/t1508-at-combinations.sh b/t/t1508-at-combinations.sh index 078e1195df..4a9964e9dc 100755 --- a/t/t1508-at-combinations.sh +++ b/t/t1508-at-combinations.sh @@ -35,7 +35,10 @@ test_expect_success 'setup' ' git checkout -b upstream-branch && test_commit upstream-one && test_commit upstream-two && - git checkout -b @/at-test && + if test_have_prereq !MINGW + then + git checkout -b @/at-test + fi && git checkout -b @@/at-test && git checkout -b @at-test && git checkout -b old-branch && @@ -64,6 +67,7 @@ check "@{-1}@{u}@{1}" commit master-one check "@" commit new-two check "@@{u}" ref refs/heads/upstream-branch check "@@/at-test" ref refs/heads/@@/at-test +test_have_prereq MINGW || check "@/at-test" ref refs/heads/@/at-test check "@at-test" ref refs/heads/@at-test nonsense "@{u}@{-1}" diff --git a/t/t1509-root-worktree.sh b/t/t1509-root-work-tree.sh index b6977d4b39..553a3f601b 100755 --- a/t/t1509-root-worktree.sh +++ b/t/t1509-root-work-tree.sh @@ -125,7 +125,7 @@ fi ONE_SHA1=d00491fd7e5bb6fa28c517a0bb32b8b506539d4d test_expect_success 'setup' ' - rm -rf /foo + rm -rf /foo && mkdir /foo && mkdir /foo/bar && echo 1 > /foo/foome && @@ -218,7 +218,7 @@ unset GIT_WORK_TREE test_expect_success 'go to /' 'cd /' test_expect_success 'setup' ' - rm -rf /.git + rm -rf /.git && echo "Initialized empty Git repository in /.git/" > expected && git init > result && test_cmp expected result @@ -241,8 +241,8 @@ say "auto bare gitdir" # DESTROYYYYY!!!!! test_expect_success 'setup' ' - rm -rf /refs /objects /info /hooks - rm /* + rm -rf /refs /objects /info /hooks && + rm -f /expected /ls.expected /me /result && cd / && echo "Initialized empty Git repository in /" > expected && git init --bare > result && diff --git a/t/t1511-rev-parse-caret.sh b/t/t1511-rev-parse-caret.sh index 15973f2094..e0a49a651f 100755 --- a/t/t1511-rev-parse-caret.sh +++ b/t/t1511-rev-parse-caret.sh @@ -6,11 +6,11 @@ test_description='tests for ref^{stuff}' test_expect_success 'setup' ' echo blob >a-blob && - git tag -a -m blob blob-tag `git hash-object -w a-blob` && + git tag -a -m blob blob-tag $(git hash-object -w a-blob) && mkdir a-tree && echo moreblobs >a-tree/another-blob && git add . && - TREE_SHA1=`git write-tree` && + TREE_SHA1=$(git write-tree) && git tag -a -m tree tree-tag "$TREE_SHA1" && git commit -m Initial && git tag -a -m commit commit-tag && @@ -18,7 +18,18 @@ test_expect_success 'setup' ' git checkout master && echo modified >>a-blob && git add -u && - git commit -m Modified + git commit -m Modified && + git branch modref && + echo changed! >>a-blob && + git add -u && + git commit -m !Exp && + git branch expref && + echo changed >>a-blob && + git add -u && + git commit -m Changed && + echo changed-again >>a-blob && + git add -u && + git commit -m Changed-again ' test_expect_success 'ref^{non-existent}' ' @@ -77,4 +88,44 @@ test_expect_success 'ref^{/Initial}' ' test_cmp expected actual ' +test_expect_success 'ref^{/!Exp}' ' + test_must_fail git rev-parse master^{/!Exp} +' + +test_expect_success 'ref^{/!}' ' + test_must_fail git rev-parse master^{/!} +' + +test_expect_success 'ref^{/!!Exp}' ' + git rev-parse expref >expected && + git rev-parse master^{/!!Exp} >actual && + test_cmp expected actual +' + +test_expect_success 'ref^{/!-}' ' + test_must_fail git rev-parse master^{/!-} +' + +test_expect_success 'ref^{/!-.}' ' + test_must_fail git rev-parse master^{/!-.} +' + +test_expect_success 'ref^{/!-non-existent}' ' + git rev-parse master >expected && + git rev-parse master^{/!-non-existent} >actual && + test_cmp expected actual +' + +test_expect_success 'ref^{/!-Changed}' ' + git rev-parse expref >expected && + git rev-parse master^{/!-Changed} >actual && + test_cmp expected actual +' + +test_expect_success 'ref^{/!-!Exp}' ' + git rev-parse modref >expected && + git rev-parse expref^{/!-!Exp} >actual && + test_cmp expected actual +' + test_done diff --git a/t/t1512-rev-parse-disambiguation.sh b/t/t1512-rev-parse-disambiguation.sh index 4a155c8d09..711704ba5a 100755 --- a/t/t1512-rev-parse-disambiguation.sh +++ b/t/t1512-rev-parse-disambiguation.sh @@ -42,7 +42,7 @@ test_expect_success 'blob and tree' ' test_expect_success 'warn ambiguity when no candidate matches type hint' ' test_must_fail git rev-parse --verify 000000000^{commit} 2>actual && - grep "short SHA1 000000000 is ambiguous" actual + test_i18ngrep "short SHA1 000000000 is ambiguous" actual ' test_expect_success 'disambiguate tree-ish' ' @@ -264,6 +264,13 @@ test_expect_success 'ambiguous commit-ish' ' test_must_fail git log 000000000... ' +# There are three objects with this prefix: a blob, a tree, and a tag. We know +# the blob will not pass as a treeish, but the tree and tag should (and thus +# cause an error). +test_expect_success 'ambiguous tags peel to treeish' ' + test_must_fail git rev-parse 0000000000f^{tree} +' + test_expect_success 'rev-parse --disambiguate' ' # The test creates 16 objects that share the prefix and two # commits created by commit-tree in earlier tests share a @@ -273,22 +280,85 @@ test_expect_success 'rev-parse --disambiguate' ' test "$(sed -e "s/^\(.........\).*/\1/" actual | sort -u)" = 000000000 ' +test_expect_success 'rev-parse --disambiguate drops duplicates' ' + git rev-parse --disambiguate=000000000 >expect && + git pack-objects .git/objects/pack/pack <expect && + git rev-parse --disambiguate=000000000 >actual && + test_cmp expect actual +' + test_expect_success 'ambiguous 40-hex ref' ' TREE=$(git mktree </dev/null) && - REF=`git rev-parse HEAD` && + REF=$(git rev-parse HEAD) && VAL=$(git commit-tree $TREE </dev/null) && git update-ref refs/heads/$REF $VAL && - test `git rev-parse $REF 2>err` = $REF && + test $(git rev-parse $REF 2>err) = $REF && grep "refname.*${REF}.*ambiguous" err ' test_expect_success 'ambiguous short sha1 ref' ' TREE=$(git mktree </dev/null) && - REF=`git rev-parse --short HEAD` && + REF=$(git rev-parse --short HEAD) && VAL=$(git commit-tree $TREE </dev/null) && git update-ref refs/heads/$REF $VAL && - test `git rev-parse $REF 2>err` = $VAL && + test $(git rev-parse $REF 2>err) = $VAL && grep "refname.*${REF}.*ambiguous" err ' +test_expect_success C_LOCALE_OUTPUT 'ambiguity errors are not repeated (raw)' ' + test_must_fail git rev-parse 00000 2>stderr && + grep "is ambiguous" stderr >errors && + test_line_count = 1 errors +' + +test_expect_success C_LOCALE_OUTPUT 'ambiguity errors are not repeated (treeish)' ' + test_must_fail git rev-parse 00000:foo 2>stderr && + grep "is ambiguous" stderr >errors && + test_line_count = 1 errors +' + +test_expect_success C_LOCALE_OUTPUT 'ambiguity errors are not repeated (peel)' ' + test_must_fail git rev-parse 00000^{commit} 2>stderr && + grep "is ambiguous" stderr >errors && + test_line_count = 1 errors +' + +test_expect_success C_LOCALE_OUTPUT 'ambiguity hints' ' + test_must_fail git rev-parse 000000000 2>stderr && + grep ^hint: stderr >hints && + # 16 candidates, plus one intro line + test_line_count = 17 hints +' + +test_expect_success C_LOCALE_OUTPUT 'ambiguity hints respect type' ' + test_must_fail git rev-parse 000000000^{commit} 2>stderr && + grep ^hint: stderr >hints && + # 5 commits, 1 tag (which is a commitish), plus intro line + test_line_count = 7 hints +' + +test_expect_success C_LOCALE_OUTPUT 'failed type-selector still shows hint' ' + # these two blobs share the same prefix "ee3d", but neither + # will pass for a commit + echo 851 | git hash-object --stdin -w && + echo 872 | git hash-object --stdin -w && + test_must_fail git rev-parse ee3d^{commit} 2>stderr && + grep ^hint: stderr >hints && + test_line_count = 3 hints +' + +test_expect_success 'core.disambiguate config can prefer types' ' + # ambiguous between tree and tag + sha1=0000000000f && + test_must_fail git rev-parse $sha1 && + git rev-parse $sha1^{commit} && + git -c core.disambiguate=committish rev-parse $sha1 +' + +test_expect_success 'core.disambiguate does not override context' ' + # treeish ambiguous between tag and tree + test_must_fail \ + git -c core.disambiguate=committish rev-parse $sha1^{tree} +' + test_done diff --git a/t/t1514-rev-parse-push.sh b/t/t1514-rev-parse-push.sh index 7214f5b33f..623a32aa6e 100755 --- a/t/t1514-rev-parse-push.sh +++ b/t/t1514-rev-parse-push.sh @@ -60,4 +60,10 @@ test_expect_success '@{push} with push refspecs' ' resolve topic@{push} refs/remotes/origin/magic/topic ' +test_expect_success 'resolving @{push} fails with a detached HEAD' ' + git checkout HEAD^0 && + test_when_finished "git checkout -" && + test_must_fail git rev-parse @{push} +' + test_done diff --git a/t/t1515-rev-parse-outside-repo.sh b/t/t1515-rev-parse-outside-repo.sh new file mode 100755 index 0000000000..3ec2971ee5 --- /dev/null +++ b/t/t1515-rev-parse-outside-repo.sh @@ -0,0 +1,45 @@ +#!/bin/sh + +test_description='check that certain rev-parse options work outside repo' +. ./test-lib.sh + +test_expect_success 'set up non-repo directory' ' + GIT_CEILING_DIRECTORIES=$(pwd) && + export GIT_CEILING_DIRECTORIES && + mkdir non-repo && + cd non-repo && + # confirm that git does not find a repo + test_must_fail git rev-parse --git-dir +' + +# Rather than directly test the output of sq-quote directly, +# make sure the shell can read back a tricky case, since +# that's what we really care about anyway. +tricky="really tricky with \\ and \" and '" +dump_args () { + for i in "$@"; do + echo "arg: $i" + done +} +test_expect_success 'rev-parse --sq-quote' ' + dump_args "$tricky" easy >expect && + eval "dump_args $(git rev-parse --sq-quote "$tricky" easy)" >actual && + test_cmp expect actual +' + +test_expect_success 'rev-parse --local-env-vars' ' + git rev-parse --local-env-vars >actual && + # we do not want to depend on the complete list here, + # so just look for something plausible + grep ^GIT_DIR actual +' + +test_expect_success 'rev-parse --resolve-git-dir' ' + git init --separate-git-dir repo dir && + test_must_fail git rev-parse --resolve-git-dir . && + echo "$(pwd)/repo" >expect && + git rev-parse --resolve-git-dir dir/.git >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index 193d55c3f4..292a0720fc 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -33,14 +33,14 @@ test_expect_success 'add one file' ' git update-index --add one && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<EOF && -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 $EMPTY_BLOB 0 one EOF test_cmp ls-files.expect ls-files.actual && test-dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<EOF && base $base -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 $EMPTY_BLOB 0 one replacements: deletions: EOF @@ -51,11 +51,11 @@ test_expect_success 'disable split index' ' git update-index --no-split-index && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<EOF && -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 $EMPTY_BLOB 0 one EOF test_cmp ls-files.expect ls-files.actual && - BASE=`test-dump-split-index .git/index | grep "^own" | sed "s/own/base/"` && + BASE=$(test-dump-split-index .git/index | grep "^own" | sed "s/own/base/") && test-dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<EOF && not a split index @@ -67,7 +67,7 @@ test_expect_success 'enable split index again, "one" now belongs to base index"' git update-index --split-index && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<EOF && -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 $EMPTY_BLOB 0 one EOF test_cmp ls-files.expect ls-files.actual && @@ -105,7 +105,7 @@ test_expect_success 'add another file, which stays index' ' git ls-files --stage >ls-files.actual && cat >ls-files.expect <<EOF && 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +100644 $EMPTY_BLOB 0 two EOF test_cmp ls-files.expect ls-files.actual && @@ -113,7 +113,7 @@ EOF q_to_tab >expect <<EOF && $BASE 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +100644 $EMPTY_BLOB 0 two replacements: 0 deletions: EOF @@ -159,14 +159,14 @@ test_expect_success 'add original file back' ' git update-index --add one && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<EOF && -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 $EMPTY_BLOB 0 one EOF test_cmp ls-files.expect ls-files.actual && test-dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<EOF && $BASE -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 $EMPTY_BLOB 0 one replacements: deletions: 0 EOF @@ -178,8 +178,8 @@ test_expect_success 'add new file' ' git update-index --add two && git ls-files --stage >actual && cat >expect <<EOF && -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +100644 $EMPTY_BLOB 0 one +100644 $EMPTY_BLOB 0 two EOF test_cmp expect actual ' @@ -188,8 +188,8 @@ test_expect_success 'unify index, two files remain' ' git update-index --no-split-index && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<EOF && -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one -100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +100644 $EMPTY_BLOB 0 one +100644 $EMPTY_BLOB 0 two EOF test_cmp ls-files.expect ls-files.actual && diff --git a/t/t2010-checkout-ambiguous.sh b/t/t2010-checkout-ambiguous.sh index 87bdf9c96b..2e47fe01cf 100755 --- a/t/t2010-checkout-ambiguous.sh +++ b/t/t2010-checkout-ambiguous.sh @@ -41,6 +41,15 @@ test_expect_success 'check ambiguity' ' test_must_fail git checkout world all ' +test_expect_success 'check ambiguity in subdir' ' + mkdir sub && + # not ambiguous because sub/world does not exist + git -C sub checkout world ../all && + echo hello >sub/world && + # ambiguous because sub/world does exist + test_must_fail git -C sub checkout world ../all +' + test_expect_success 'disambiguate checking out from a tree-ish' ' echo bye > world && git checkout world -- world && @@ -49,7 +58,7 @@ test_expect_success 'disambiguate checking out from a tree-ish' ' test_expect_success 'accurate error message with more than one ref' ' test_must_fail git checkout HEAD master -- 2>actual && - grep 2 actual && + test_i18ngrep 2 actual && test_i18ngrep "one reference expected, 2 given" actual ' diff --git a/t/t2011-checkout-invalid-head.sh b/t/t2011-checkout-invalid-head.sh index 300f8bf25c..c5501b008c 100755 --- a/t/t2011-checkout-invalid-head.sh +++ b/t/t2011-checkout-invalid-head.sh @@ -19,4 +19,43 @@ test_expect_success 'checkout master from invalid HEAD' ' git checkout master -- ' +test_expect_success 'checkout notices failure to lock HEAD' ' + test_when_finished "rm -f .git/HEAD.lock" && + >.git/HEAD.lock && + test_must_fail git checkout -b other +' + +test_expect_success 'create ref directory/file conflict scenario' ' + git update-ref refs/heads/outer/inner master && + + # do not rely on symbolic-ref to get a known state, + # as it may use the same code we are testing + reset_to_df () { + echo "ref: refs/heads/outer" >.git/HEAD + } +' + +test_expect_success 'checkout away from d/f HEAD (unpacked, to branch)' ' + reset_to_df && + git checkout master +' + +test_expect_success 'checkout away from d/f HEAD (unpacked, to detached)' ' + reset_to_df && + git checkout --detach master +' + +test_expect_success 'pack refs' ' + git pack-refs --all --prune +' + +test_expect_success 'checkout away from d/f HEAD (packed, to branch)' ' + reset_to_df && + git checkout master +' + +test_expect_success 'checkout away from d/f HEAD (packed, to detached)' ' + reset_to_df && + git checkout --detach master +' test_done diff --git a/t/t2018-checkout-branch.sh b/t/t2018-checkout-branch.sh index 2741262369..2131fb2a56 100755 --- a/t/t2018-checkout-branch.sh +++ b/t/t2018-checkout-branch.sh @@ -124,7 +124,7 @@ test_expect_success 'checkout -b to @{-1} fails with the right branch name' ' git checkout branch2 && echo >expect "fatal: A branch named '\''branch1'\'' already exists." && test_must_fail git checkout -b @{-1} 2>actual && - test_cmp expect actual + test_i18ncmp expect actual ' test_expect_success 'checkout -B to an existing branch resets branch to HEAD' ' diff --git a/t/t2020-checkout-detach.sh b/t/t2020-checkout-detach.sh index 5d68729d7a..fbb4ee9bb4 100755 --- a/t/t2020-checkout-detach.sh +++ b/t/t2020-checkout-detach.sh @@ -163,4 +163,27 @@ test_expect_success 'tracking count is accurate after orphan check' ' test_i18ncmp expect stdout ' +test_expect_success 'no advice given for explicit detached head state' ' + # baseline + test_config advice.detachedHead true && + git checkout child && git checkout HEAD^0 >expect.advice 2>&1 && + test_config advice.detachedHead false && + git checkout child && git checkout HEAD^0 >expect.no-advice 2>&1 && + test_unconfig advice.detachedHead && + # without configuration, the advice.* variables default to true + git checkout child && git checkout HEAD^0 >actual 2>&1 && + test_cmp expect.advice actual && + + # with explicit --detach + # no configuration + test_unconfig advice.detachedHead && + git checkout child && git checkout --detach HEAD^0 >actual 2>&1 && + test_cmp expect.no-advice actual && + + # explicitly decline advice + test_config advice.detachedHead false && + git checkout child && git checkout --detach HEAD^0 >actual 2>&1 && + test_cmp expect.no-advice actual +' + test_done diff --git a/t/t2024-checkout-dwim.sh b/t/t2024-checkout-dwim.sh index 468a000e4b..3e5ac81bd2 100755 --- a/t/t2024-checkout-dwim.sh +++ b/t/t2024-checkout-dwim.sh @@ -174,6 +174,18 @@ test_expect_success 'checkout of branch with a file having the same name fails' test_branch master ' +test_expect_success 'checkout of branch with a file in subdir having the same name fails' ' + git checkout -B master && + test_might_fail git branch -D spam && + + >spam && + mkdir sub && + mv spam sub/spam && + test_must_fail git -C sub checkout spam && + test_must_fail git rev-parse --verify refs/heads/spam && + test_branch master +' + test_expect_success 'checkout <branch> -- succeeds, even if a file with the same name exists' ' git checkout -B master && test_might_fail git branch -D spam && diff --git a/t/t2025-checkout-to.sh b/t/t2025-checkout-to.sh deleted file mode 100755 index f8e4df4818..0000000000 --- a/t/t2025-checkout-to.sh +++ /dev/null @@ -1,129 +0,0 @@ -#!/bin/sh - -test_description='test git checkout --to' - -. ./test-lib.sh - -test_expect_success 'setup' ' - test_commit init -' - -test_expect_success 'checkout --to not updating paths' ' - test_must_fail git checkout --to -- init.t -' - -test_expect_success 'checkout --to an existing worktree' ' - mkdir -p existing/subtree && - test_must_fail git checkout --detach --to existing master -' - -test_expect_success 'checkout --to an existing empty worktree' ' - mkdir existing_empty && - git checkout --detach --to existing_empty master -' - -test_expect_success 'checkout --to refuses to checkout locked branch' ' - test_must_fail git checkout --to zere master && - ! test -d zere && - ! test -d .git/worktrees/zere -' - -test_expect_success 'checkout --to a new worktree' ' - git rev-parse HEAD >expect && - git checkout --detach --to here master && - ( - cd here && - test_cmp ../init.t init.t && - test_must_fail git symbolic-ref HEAD && - git rev-parse HEAD >actual && - test_cmp ../expect actual && - git fsck - ) -' - -test_expect_success 'checkout --to a new worktree from a subdir' ' - ( - mkdir sub && - cd sub && - git checkout --detach --to here master && - cd here && - test_cmp ../../init.t init.t - ) -' - -test_expect_success 'checkout --to from a linked checkout' ' - ( - cd here && - git checkout --detach --to nested-here master && - cd nested-here && - git fsck - ) -' - -test_expect_success 'checkout --to a new worktree creating new branch' ' - git checkout --to there -b newmaster master && - ( - cd there && - test_cmp ../init.t init.t && - git symbolic-ref HEAD >actual && - echo refs/heads/newmaster >expect && - test_cmp expect actual && - git fsck - ) -' - -test_expect_success 'die the same branch is already checked out' ' - ( - cd here && - test_must_fail git checkout newmaster - ) -' - -test_expect_success 'not die the same branch is already checked out' ' - ( - cd here && - git checkout --ignore-other-worktrees --to anothernewmaster newmaster - ) -' - -test_expect_success 'not die on re-checking out current branch' ' - ( - cd there && - git checkout newmaster - ) -' - -test_expect_success 'checkout --to from a bare repo' ' - ( - git clone --bare . bare && - cd bare && - git checkout --to ../there2 -b bare-master master - ) -' - -test_expect_success 'checkout from a bare repo without --to' ' - ( - cd bare && - test_must_fail git checkout master - ) -' - -test_expect_success 'checkout with grafts' ' - test_when_finished rm .git/info/grafts && - test_commit abc && - SHA1=`git rev-parse HEAD` && - test_commit def && - test_commit xyz && - echo "`git rev-parse HEAD` $SHA1" >.git/info/grafts && - cat >expected <<-\EOF && - xyz - abc - EOF - git log --format=%s -2 >actual && - test_cmp expected actual && - git checkout --detach --to grafted master && - git --git-dir=grafted/.git log --format=%s -2 >actual && - test_cmp expected actual -' - -test_done diff --git a/t/t2025-worktree-add.sh b/t/t2025-worktree-add.sh new file mode 100755 index 0000000000..b618d6be21 --- /dev/null +++ b/t/t2025-worktree-add.sh @@ -0,0 +1,311 @@ +#!/bin/sh + +test_description='test git worktree add' + +. ./test-lib.sh + +. "$TEST_DIRECTORY"/lib-rebase.sh + +test_expect_success 'setup' ' + test_commit init +' + +test_expect_success '"add" an existing worktree' ' + mkdir -p existing/subtree && + test_must_fail git worktree add --detach existing master +' + +test_expect_success '"add" an existing empty worktree' ' + mkdir existing_empty && + git worktree add --detach existing_empty master +' + +test_expect_success '"add" using shorthand - fails when no previous branch' ' + test_must_fail git worktree add existing_short - +' + +test_expect_success '"add" using - shorthand' ' + git checkout -b newbranch && + echo hello >myworld && + git add myworld && + git commit -m myworld && + git checkout master && + git worktree add short-hand - && + echo refs/heads/newbranch >expect && + git -C short-hand rev-parse --symbolic-full-name HEAD >actual && + test_cmp expect actual +' + +test_expect_success '"add" refuses to checkout locked branch' ' + test_must_fail git worktree add zere master && + ! test -d zere && + ! test -d .git/worktrees/zere +' + +test_expect_success 'checking out paths not complaining about linked checkouts' ' + ( + cd existing_empty && + echo dirty >>init.t && + git checkout master -- init.t + ) +' + +test_expect_success '"add" worktree' ' + git rev-parse HEAD >expect && + git worktree add --detach here master && + ( + cd here && + test_cmp ../init.t init.t && + test_must_fail git symbolic-ref HEAD && + git rev-parse HEAD >actual && + test_cmp ../expect actual && + git fsck + ) +' + +test_expect_success '"add" worktree from a subdir' ' + ( + mkdir sub && + cd sub && + git worktree add --detach here master && + cd here && + test_cmp ../../init.t init.t + ) +' + +test_expect_success '"add" from a linked checkout' ' + ( + cd here && + git worktree add --detach nested-here master && + cd nested-here && + git fsck + ) +' + +test_expect_success '"add" worktree creating new branch' ' + git worktree add -b newmaster there master && + ( + cd there && + test_cmp ../init.t init.t && + git symbolic-ref HEAD >actual && + echo refs/heads/newmaster >expect && + test_cmp expect actual && + git fsck + ) +' + +test_expect_success 'die the same branch is already checked out' ' + ( + cd here && + test_must_fail git checkout newmaster + ) +' + +test_expect_success SYMLINKS 'die the same branch is already checked out (symlink)' ' + head=$(git -C there rev-parse --git-path HEAD) && + ref=$(git -C there symbolic-ref HEAD) && + rm "$head" && + ln -s "$ref" "$head" && + test_must_fail git -C here checkout newmaster +' + +test_expect_success 'not die the same branch is already checked out' ' + ( + cd here && + git worktree add --force anothernewmaster newmaster + ) +' + +test_expect_success 'not die on re-checking out current branch' ' + ( + cd there && + git checkout newmaster + ) +' + +test_expect_success '"add" from a bare repo' ' + ( + git clone --bare . bare && + cd bare && + git worktree add -b bare-master ../there2 master + ) +' + +test_expect_success 'checkout from a bare repo without "add"' ' + ( + cd bare && + test_must_fail git checkout master + ) +' + +test_expect_success '"add" default branch of a bare repo' ' + ( + git clone --bare . bare2 && + cd bare2 && + git worktree add ../there3 master + ) +' + +test_expect_success 'checkout with grafts' ' + test_when_finished rm .git/info/grafts && + test_commit abc && + SHA1=$(git rev-parse HEAD) && + test_commit def && + test_commit xyz && + echo "$(git rev-parse HEAD) $SHA1" >.git/info/grafts && + cat >expected <<-\EOF && + xyz + abc + EOF + git log --format=%s -2 >actual && + test_cmp expected actual && + git worktree add --detach grafted master && + git --git-dir=grafted/.git log --format=%s -2 >actual && + test_cmp expected actual +' + +test_expect_success '"add" from relative HEAD' ' + test_commit a && + test_commit b && + test_commit c && + git rev-parse HEAD~1 >expected && + git worktree add relhead HEAD~1 && + git -C relhead rev-parse HEAD >actual && + test_cmp expected actual +' + +test_expect_success '"add -b" with <branch> omitted' ' + git worktree add -b burble flornk && + test_cmp_rev HEAD burble +' + +test_expect_success '"add --detach" with <branch> omitted' ' + git worktree add --detach fishhook && + git rev-parse HEAD >expected && + git -C fishhook rev-parse HEAD >actual && + test_cmp expected actual && + test_must_fail git -C fishhook symbolic-ref HEAD +' + +test_expect_success '"add" with <branch> omitted' ' + git worktree add wiffle/bat && + test_cmp_rev HEAD bat +' + +test_expect_success '"add" auto-vivify does not clobber existing branch' ' + test_commit c1 && + test_commit c2 && + git branch precious HEAD~1 && + test_must_fail git worktree add precious && + test_cmp_rev HEAD~1 precious && + test_path_is_missing precious +' + +test_expect_success '"add" no auto-vivify with --detach and <branch> omitted' ' + git worktree add --detach mish/mash && + test_must_fail git rev-parse mash -- && + test_must_fail git -C mish/mash symbolic-ref HEAD +' + +test_expect_success '"add" -b/-B mutually exclusive' ' + test_must_fail git worktree add -b poodle -B poodle bamboo master +' + +test_expect_success '"add" -b/--detach mutually exclusive' ' + test_must_fail git worktree add -b poodle --detach bamboo master +' + +test_expect_success '"add" -B/--detach mutually exclusive' ' + test_must_fail git worktree add -B poodle --detach bamboo master +' + +test_expect_success '"add -B" fails if the branch is checked out' ' + git rev-parse newmaster >before && + test_must_fail git worktree add -B newmaster bamboo master && + git rev-parse newmaster >after && + test_cmp before after +' + +test_expect_success 'add -B' ' + git worktree add -B poodle bamboo2 master^ && + git -C bamboo2 symbolic-ref HEAD >actual && + echo refs/heads/poodle >expected && + test_cmp expected actual && + test_cmp_rev master^ poodle +' + +test_expect_success 'local clone from linked checkout' ' + git clone --local here here-clone && + ( cd here-clone && git fsck ) +' + +test_expect_success '"add" worktree with --no-checkout' ' + git worktree add --no-checkout -b swamp swamp && + ! test -e swamp/init.t && + git -C swamp reset --hard && + test_cmp init.t swamp/init.t +' + +test_expect_success '"add" worktree with --checkout' ' + git worktree add --checkout -b swmap2 swamp2 && + test_cmp init.t swamp2/init.t +' + +test_expect_success 'put a worktree under rebase' ' + git worktree add under-rebase && + ( + cd under-rebase && + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i HEAD^ && + git worktree list | grep "under-rebase.*detached HEAD" + ) +' + +test_expect_success 'add a worktree, checking out a rebased branch' ' + test_must_fail git worktree add new-rebase under-rebase && + ! test -d new-rebase +' + +test_expect_success 'checking out a rebased branch from another worktree' ' + git worktree add new-place && + test_must_fail git -C new-place checkout under-rebase +' + +test_expect_success 'not allow to delete a branch under rebase' ' + ( + cd under-rebase && + test_must_fail git branch -D under-rebase + ) +' + +test_expect_success 'rename a branch under rebase not allowed' ' + test_must_fail git branch -M under-rebase rebase-with-new-name +' + +test_expect_success 'check out from current worktree branch ok' ' + ( + cd under-rebase && + git checkout under-rebase && + git checkout - && + git rebase --abort + ) +' + +test_expect_success 'checkout a branch under bisect' ' + git worktree add under-bisect && + ( + cd under-bisect && + git bisect start && + git bisect bad && + git bisect good HEAD~2 && + git worktree list | grep "under-bisect.*detached HEAD" && + test_must_fail git worktree add new-bisect under-bisect && + ! test -d new-bisect + ) +' + +test_expect_success 'rename a branch under bisect not allowed' ' + test_must_fail git branch -M under-bisect bisect-with-new-name +' + +test_done diff --git a/t/t2026-prune-linked-checkouts.sh b/t/t2026-worktree-prune.sh index 1821a480c5..a0f1e3bb80 100755 --- a/t/t2026-prune-linked-checkouts.sh +++ b/t/t2026-worktree-prune.sh @@ -8,15 +8,15 @@ test_expect_success initialize ' git commit --allow-empty -m init ' -test_expect_success 'prune --worktrees on normal repo' ' - git prune --worktrees && - test_must_fail git prune --worktrees abc +test_expect_success 'worktree prune on normal repo' ' + git worktree prune && + test_must_fail git worktree prune abc ' test_expect_success 'prune files inside $GIT_DIR/worktrees' ' mkdir .git/worktrees && : >.git/worktrees/abc && - git prune --worktrees --verbose >actual && + git worktree prune --verbose >actual && cat >expect <<EOF && Removing worktrees/abc: not a valid directory EOF @@ -31,7 +31,7 @@ test_expect_success 'prune directories without gitdir' ' cat >expect <<EOF && Removing worktrees/def: gitdir file does not exist EOF - git prune --worktrees --verbose >actual && + git worktree prune --verbose >actual && test_i18ncmp expect actual && ! test -d .git/worktrees/def && ! test -d .git/worktrees @@ -42,7 +42,7 @@ test_expect_success SANITY 'prune directories with unreadable gitdir' ' : >.git/worktrees/def/def && : >.git/worktrees/def/gitdir && chmod u-r .git/worktrees/def/gitdir && - git prune --worktrees --verbose >actual && + git worktree prune --verbose >actual && test_i18ngrep "Removing worktrees/def: unable to read gitdir file" actual && ! test -d .git/worktrees/def && ! test -d .git/worktrees @@ -52,7 +52,7 @@ test_expect_success 'prune directories with invalid gitdir' ' mkdir -p .git/worktrees/def/abc && : >.git/worktrees/def/def && : >.git/worktrees/def/gitdir && - git prune --worktrees --verbose >actual && + git worktree prune --verbose >actual && test_i18ngrep "Removing worktrees/def: invalid gitdir file" actual && ! test -d .git/worktrees/def && ! test -d .git/worktrees @@ -62,7 +62,7 @@ test_expect_success 'prune directories with gitdir pointing to nowhere' ' mkdir -p .git/worktrees/def/abc && : >.git/worktrees/def/def && echo "$(pwd)"/nowhere >.git/worktrees/def/gitdir && - git prune --worktrees --verbose >actual && + git worktree prune --verbose >actual && test_i18ngrep "Removing worktrees/def: gitdir file points to non-existent location" actual && ! test -d .git/worktrees/def && ! test -d .git/worktrees @@ -72,7 +72,7 @@ test_expect_success 'not prune locked checkout' ' test_when_finished rm -r .git/worktrees && mkdir -p .git/worktrees/ghi && : >.git/worktrees/ghi/locked && - git prune --worktrees && + git worktree prune && test -d .git/worktrees/ghi ' @@ -82,14 +82,14 @@ test_expect_success 'not prune recent checkouts' ' mkdir -p .git/worktrees/jlm && echo "$(pwd)"/zz >.git/worktrees/jlm/gitdir && rmdir zz && - git prune --worktrees --verbose --expire=2.days.ago && + git worktree prune --verbose --expire=2.days.ago && test -d .git/worktrees/jlm ' test_expect_success 'not prune proper checkouts' ' test_when_finished rm -r .git/worktrees && - git checkout "--to=$PWD/nop" --detach master && - git prune --worktrees && + git worktree add --detach "$PWD/nop" master && + git worktree prune && test -d .git/worktrees/nop ' diff --git a/t/t2027-worktree-list.sh b/t/t2027-worktree-list.sh new file mode 100755 index 0000000000..465eeeacd3 --- /dev/null +++ b/t/t2027-worktree-list.sh @@ -0,0 +1,139 @@ +#!/bin/sh + +test_description='test git worktree list' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit init +' + +test_expect_success 'rev-parse --git-common-dir on main worktree' ' + git rev-parse --git-common-dir >actual && + echo .git >expected && + test_cmp expected actual && + mkdir sub && + git -C sub rev-parse --git-common-dir >actual2 && + echo sub/.git >expected2 && + test_cmp expected2 actual2 +' + +test_expect_success '"list" all worktrees from main' ' + echo "$(git rev-parse --show-toplevel) $(git rev-parse --short HEAD) [$(git symbolic-ref --short HEAD)]" >expect && + test_when_finished "rm -rf here && git worktree prune" && + git worktree add --detach here master && + echo "$(git -C here rev-parse --show-toplevel) $(git rev-parse --short HEAD) (detached HEAD)" >>expect && + git worktree list | sed "s/ */ /g" >actual && + test_cmp expect actual +' + +test_expect_success '"list" all worktrees from linked' ' + echo "$(git rev-parse --show-toplevel) $(git rev-parse --short HEAD) [$(git symbolic-ref --short HEAD)]" >expect && + test_when_finished "rm -rf here && git worktree prune" && + git worktree add --detach here master && + echo "$(git -C here rev-parse --show-toplevel) $(git rev-parse --short HEAD) (detached HEAD)" >>expect && + git -C here worktree list | sed "s/ */ /g" >actual && + test_cmp expect actual +' + +test_expect_success '"list" all worktrees --porcelain' ' + echo "worktree $(git rev-parse --show-toplevel)" >expect && + echo "HEAD $(git rev-parse HEAD)" >>expect && + echo "branch $(git symbolic-ref HEAD)" >>expect && + echo >>expect && + test_when_finished "rm -rf here && git worktree prune" && + git worktree add --detach here master && + echo "worktree $(git -C here rev-parse --show-toplevel)" >>expect && + echo "HEAD $(git rev-parse HEAD)" >>expect && + echo "detached" >>expect && + echo >>expect && + git worktree list --porcelain >actual && + test_cmp expect actual +' + +test_expect_success 'bare repo setup' ' + git init --bare bare1 && + echo "data" >file1 && + git add file1 && + git commit -m"File1: add data" && + git push bare1 master && + git reset --hard HEAD^ +' + +test_expect_success '"list" all worktrees from bare main' ' + test_when_finished "rm -rf there && git -C bare1 worktree prune" && + git -C bare1 worktree add --detach ../there master && + echo "$(pwd)/bare1 (bare)" >expect && + echo "$(git -C there rev-parse --show-toplevel) $(git -C there rev-parse --short HEAD) (detached HEAD)" >>expect && + git -C bare1 worktree list | sed "s/ */ /g" >actual && + test_cmp expect actual +' + +test_expect_success '"list" all worktrees --porcelain from bare main' ' + test_when_finished "rm -rf there && git -C bare1 worktree prune" && + git -C bare1 worktree add --detach ../there master && + echo "worktree $(pwd)/bare1" >expect && + echo "bare" >>expect && + echo >>expect && + echo "worktree $(git -C there rev-parse --show-toplevel)" >>expect && + echo "HEAD $(git -C there rev-parse HEAD)" >>expect && + echo "detached" >>expect && + echo >>expect && + git -C bare1 worktree list --porcelain >actual && + test_cmp expect actual +' + +test_expect_success '"list" all worktrees from linked with a bare main' ' + test_when_finished "rm -rf there && git -C bare1 worktree prune" && + git -C bare1 worktree add --detach ../there master && + echo "$(pwd)/bare1 (bare)" >expect && + echo "$(git -C there rev-parse --show-toplevel) $(git -C there rev-parse --short HEAD) (detached HEAD)" >>expect && + git -C there worktree list | sed "s/ */ /g" >actual && + test_cmp expect actual +' + +test_expect_success 'bare repo cleanup' ' + rm -rf bare1 +' + +test_expect_success 'broken main worktree still at the top' ' + git init broken-main && + ( + cd broken-main && + test_commit new && + git worktree add linked && + cat >expected <<-EOF && + worktree $(pwd) + HEAD $_z40 + + EOF + cd linked && + echo "worktree $(pwd)" >expected && + echo "ref: .broken" >../.git/HEAD && + git worktree list --porcelain | head -n 3 >actual && + test_cmp ../expected actual && + git worktree list | head -n 1 >actual.2 && + grep -F "(error)" actual.2 + ) +' + +test_expect_success 'linked worktrees are sorted' ' + mkdir sorted && + git init sorted/main && + ( + cd sorted/main && + test_tick && + test_commit new && + git worktree add ../first && + git worktree add ../second && + git worktree list --porcelain | grep ^worktree >actual + ) && + cat >expected <<-EOF && + worktree $(pwd)/sorted/main + worktree $(pwd)/sorted/first + worktree $(pwd)/sorted/second + EOF + test_cmp expected sorted/main/actual +' + +test_done diff --git a/t/t2028-worktree-move.sh b/t/t2028-worktree-move.sh new file mode 100755 index 0000000000..8298aaf97f --- /dev/null +++ b/t/t2028-worktree-move.sh @@ -0,0 +1,62 @@ +#!/bin/sh + +test_description='test git worktree move, remove, lock and unlock' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit init && + git worktree add source && + git worktree list --porcelain | grep "^worktree" >actual && + cat <<-EOF >expected && + worktree $(pwd) + worktree $(pwd)/source + EOF + test_cmp expected actual +' + +test_expect_success 'lock main worktree' ' + test_must_fail git worktree lock . +' + +test_expect_success 'lock linked worktree' ' + git worktree lock --reason hahaha source && + echo hahaha >expected && + test_cmp expected .git/worktrees/source/locked +' + +test_expect_success 'lock linked worktree from another worktree' ' + rm .git/worktrees/source/locked && + git worktree add elsewhere && + git -C elsewhere worktree lock --reason hahaha ../source && + echo hahaha >expected && + test_cmp expected .git/worktrees/source/locked +' + +test_expect_success 'lock worktree twice' ' + test_must_fail git worktree lock source && + echo hahaha >expected && + test_cmp expected .git/worktrees/source/locked +' + +test_expect_success 'lock worktree twice (from the locked worktree)' ' + test_must_fail git -C source worktree lock . && + echo hahaha >expected && + test_cmp expected .git/worktrees/source/locked +' + +test_expect_success 'unlock main worktree' ' + test_must_fail git worktree unlock . +' + +test_expect_success 'unlock linked worktree' ' + git worktree unlock source && + test_path_is_missing .git/worktrees/source/locked +' + +test_expect_success 'unlock worktree twice' ' + test_must_fail git worktree unlock source && + test_path_is_missing .git/worktrees/source/locked +' + +test_done diff --git a/t/t2102-update-index-symlinks.sh b/t/t2102-update-index-symlinks.sh index 4d0d0a3515..22f2c730ae 100755 --- a/t/t2102-update-index-symlinks.sh +++ b/t/t2102-update-index-symlinks.sh @@ -23,7 +23,7 @@ git update-index symlink' test_expect_success \ 'the index entry must still be a symbolic link' ' -case "`git ls-files --stage --cached symlink`" in +case "$(git ls-files --stage --cached symlink)" in 120000" "*symlink) echo pass;; *) echo fail; git ls-files --stage --cached symlink; (exit 1);; esac' diff --git a/t/t2107-update-index-basic.sh b/t/t2107-update-index-basic.sh index dfe02f4818..32ac6e09bd 100755 --- a/t/t2107-update-index-basic.sh +++ b/t/t2107-update-index-basic.sh @@ -80,4 +80,17 @@ test_expect_success '.lock files cleaned up' ' ) ' +test_expect_success '--chmod=+x and chmod=-x in the same argument list' ' + >A && + >B && + git add A B && + git update-index --chmod=+x A --chmod=-x B && + cat >expect <<-\EOF && + 100755 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 A + 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 B + EOF + git ls-files --stage A B >actual && + test_cmp expect actual +' + test_done diff --git a/t/t2200-add-update.sh b/t/t2200-add-update.sh index e16b15d3e5..314c73c5a7 100755 --- a/t/t2200-add-update.sh +++ b/t/t2200-add-update.sh @@ -84,6 +84,8 @@ test_expect_success 'non-qualified update in subdir updates from the root' ' ( cd dir1 && echo even more >>sub2 && + git --literal-pathspecs add -u && + echo even more >>sub2 && git add -u ) && : >expect && diff --git a/t/t2202-add-addremove.sh b/t/t2202-add-addremove.sh index fc8b59e7f7..6a5a3166b1 100755 --- a/t/t2202-add-addremove.sh +++ b/t/t2202-add-addremove.sh @@ -14,6 +14,7 @@ test_expect_success setup ' echo expect echo ignored ) >.gitignore && + git --literal-pathspecs add --all && >will-remove && git add --all && test_tick && diff --git a/t/t2203-add-intent.sh b/t/t2203-add-intent.sh index 7c641bfaf4..84a9028c43 100755 --- a/t/t2203-add-intent.sh +++ b/t/t2203-add-intent.sh @@ -57,8 +57,9 @@ test_expect_success 'i-t-a entry is simply ignored' ' git add -N nitfol && git commit -m second && test $(git ls-tree HEAD -- nitfol | wc -l) = 0 && - test $(git diff --name-only HEAD -- nitfol | wc -l) = 0 && - test $(git diff --name-only -- nitfol | wc -l) = 1 + test $(git diff --name-only HEAD -- nitfol | wc -l) = 1 && + test $(git diff --name-only --ita-invisible-in-index HEAD -- nitfol | wc -l) = 0 && + test $(git diff --name-only --ita-invisible-in-index -- nitfol | wc -l) = 1 ' test_expect_success 'can commit with an unrelated i-t-a entry in index' ' @@ -87,15 +88,67 @@ test_expect_success 'cache-tree invalidates i-t-a paths' ' : >dir/bar && git add -N dir/bar && git diff --cached --name-only >actual && - >expect && + echo dir/bar >expect && test_cmp expect actual && git write-tree >/dev/null && git diff --cached --name-only >actual && - >expect && + echo dir/bar >expect && test_cmp expect actual ' +test_expect_success 'cache-tree does not ignore dir that has i-t-a entries' ' + git init ita-in-dir && + ( + cd ita-in-dir && + mkdir 2 && + for f in 1 2/1 2/2 3 + do + echo "$f" >"$f" + done && + git add 1 2/2 3 && + git add -N 2/1 && + git commit -m committed && + git ls-tree -r HEAD >actual && + grep 2/2 actual + ) +' + +test_expect_success 'cache-tree does skip dir that becomes empty' ' + rm -fr ita-in-dir && + git init ita-in-dir && + ( + cd ita-in-dir && + mkdir -p 1/2/3 && + echo 4 >1/2/3/4 && + git add -N 1/2/3/4 && + git write-tree >actual && + echo $EMPTY_TREE >expected && + test_cmp expected actual + ) +' + +test_expect_success 'commit: ita entries ignored in empty intial commit check' ' + git init empty-intial-commit && + ( + cd empty-intial-commit && + : >one && + git add -N one && + test_must_fail git commit -m nothing-new-here + ) +' + +test_expect_success 'commit: ita entries ignored in empty commit check' ' + git init empty-subsequent-commit && + ( + cd empty-subsequent-commit && + test_commit one && + : >two && + git add -N two && + test_must_fail git commit -m nothing-new-here + ) +' + test_done diff --git a/t/t2300-cd-to-toplevel.sh b/t/t2300-cd-to-toplevel.sh index 9965bc5c92..c8de6d8a19 100755 --- a/t/t2300-cd-to-toplevel.sh +++ b/t/t2300-cd-to-toplevel.sh @@ -4,11 +4,20 @@ test_description='cd_to_toplevel' . ./test-lib.sh +EXEC_PATH="$(git --exec-path)" +test_have_prereq !MINGW || +case "$EXEC_PATH" in +[A-Za-z]:/*) + EXEC_PATH="/${EXEC_PATH%%:*}${EXEC_PATH#?:}" + ;; +esac + test_cd_to_toplevel () { test_expect_success $3 "$2" ' ( cd '"'$1'"' && - . "$(git --exec-path)"/git-sh-setup && + PATH="$EXEC_PATH:$PATH" && + . git-sh-setup && cd_to_toplevel && [ "$(pwd -P)" = "$TOPLEVEL" ] ) diff --git a/t/t3000-ls-files-others.sh b/t/t3000-ls-files-others.sh index 88be904c09..c525656b2c 100755 --- a/t/t3000-ls-files-others.sh +++ b/t/t3000-ls-files-others.sh @@ -65,6 +65,13 @@ test_expect_success '--no-empty-directory hides empty directory' ' test_cmp expected3 output ' +test_expect_success 'ls-files --others handles non-submodule .git' ' + mkdir not-a-submodule && + echo foo >not-a-submodule/.git && + git ls-files -o >output && + test_cmp expected1 output +' + test_expect_success SYMLINKS 'ls-files --others with symlinked submodule' ' git init super && git init sub && diff --git a/t/t3007-ls-files-recurse-submodules.sh b/t/t3007-ls-files-recurse-submodules.sh new file mode 100755 index 0000000000..a5426171d3 --- /dev/null +++ b/t/t3007-ls-files-recurse-submodules.sh @@ -0,0 +1,210 @@ +#!/bin/sh + +test_description='Test ls-files recurse-submodules feature + +This test verifies the recurse-submodules feature correctly lists files from +submodules. +' + +. ./test-lib.sh + +test_expect_success 'setup directory structure and submodules' ' + echo a >a && + mkdir b && + echo b >b/b && + git add a b && + git commit -m "add a and b" && + git init submodule && + echo c >submodule/c && + git -C submodule add c && + git -C submodule commit -m "add c" && + git submodule add ./submodule && + git commit -m "added submodule" +' + +test_expect_success 'ls-files correctly outputs files in submodule' ' + cat >expect <<-\EOF && + .gitmodules + a + b/b + submodule/c + EOF + + git ls-files --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success 'ls-files correctly outputs files in submodule with -z' ' + lf_to_nul >expect <<-\EOF && + .gitmodules + a + b/b + submodule/c + EOF + + git ls-files --recurse-submodules -z >actual && + test_cmp expect actual +' + +test_expect_success 'ls-files does not output files not added to a repo' ' + cat >expect <<-\EOF && + .gitmodules + a + b/b + submodule/c + EOF + + echo a >not_added && + echo b >b/not_added && + echo c >submodule/not_added && + git ls-files --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success 'ls-files recurses more than 1 level' ' + cat >expect <<-\EOF && + .gitmodules + a + b/b + submodule/.gitmodules + submodule/c + submodule/subsub/d + EOF + + git init submodule/subsub && + echo d >submodule/subsub/d && + git -C submodule/subsub add d && + git -C submodule/subsub commit -m "add d" && + git -C submodule submodule add ./subsub && + git -C submodule commit -m "added subsub" && + git ls-files --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs setup' ' + echo e >submodule/subsub/e.txt && + git -C submodule/subsub add e.txt && + git -C submodule/subsub commit -m "adding e.txt" && + echo f >submodule/f.TXT && + echo g >submodule/g.txt && + git -C submodule add f.TXT g.txt && + git -C submodule commit -m "add f and g" && + echo h >h.txt && + mkdir sib && + echo sib >sib/file && + git add h.txt sib/file && + git commit -m "add h and sib/file" && + git init sub && + echo sub >sub/file && + git -C sub add file && + git -C sub commit -m "add file" && + git submodule add ./sub && + git commit -m "added sub" && + + cat >expect <<-\EOF && + .gitmodules + a + b/b + h.txt + sib/file + sub/file + submodule/.gitmodules + submodule/c + submodule/f.TXT + submodule/g.txt + submodule/subsub/d + submodule/subsub/e.txt + EOF + + git ls-files --recurse-submodules >actual && + test_cmp expect actual && + cat actual && + git ls-files --recurse-submodules "*" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + h.txt + submodule/g.txt + submodule/subsub/e.txt + EOF + + git ls-files --recurse-submodules "*.txt" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + h.txt + submodule/f.TXT + submodule/g.txt + submodule/subsub/e.txt + EOF + + git ls-files --recurse-submodules ":(icase)*.txt" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + h.txt + submodule/f.TXT + submodule/g.txt + EOF + + git ls-files --recurse-submodules ":(icase)*.txt" ":(exclude)submodule/subsub/*" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + sub/file + EOF + + git ls-files --recurse-submodules "sub" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "sub/" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "sub/file" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "su*/file" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "su?/file" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + sib/file + sub/file + EOF + + git ls-files --recurse-submodules "s??/file" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "s???file" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "s*file" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules does not support --error-unmatch' ' + test_must_fail git ls-files --recurse-submodules --error-unmatch 2>actual && + test_i18ngrep "does not support --error-unmatch" actual +' + +test_incompatible_with_recurse_submodules () { + test_expect_success "--recurse-submodules and $1 are incompatible" " + test_must_fail git ls-files --recurse-submodules $1 2>actual && + test_i18ngrep 'unsupported mode' actual + " +} + +test_incompatible_with_recurse_submodules --deleted +test_incompatible_with_recurse_submodules --modified +test_incompatible_with_recurse_submodules --others +test_incompatible_with_recurse_submodules --stage +test_incompatible_with_recurse_submodules --killed +test_incompatible_with_recurse_submodules --unmerged + +test_done diff --git a/t/t3020-ls-files-error-unmatch.sh b/t/t3020-ls-files-error-unmatch.sh index ca01053bcc..124e73b8e6 100755 --- a/t/t3020-ls-files-error-unmatch.sh +++ b/t/t3020-ls-files-error-unmatch.sh @@ -22,7 +22,7 @@ test_expect_success \ 'test_must_fail git ls-files --error-unmatch foo bar-does-not-match' test_expect_success \ - 'git ls-files --error-unmatch should succeed eith matched paths.' \ + 'git ls-files --error-unmatch should succeed with matched paths.' \ 'git ls-files --error-unmatch foo bar' test_done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index 82e18548c3..9a893b5fe7 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -263,7 +263,7 @@ test_expect_success 'setup 8' ' test_ln_s_add e a && test_tick && git commit -m "rename a->e, symlink a->e" && - oln=`printf e | git hash-object --stdin` + oln=$(printf e | git hash-object --stdin) ' test_expect_success 'setup 9' ' @@ -575,13 +575,13 @@ test_expect_success 'merge removes empty directories' ' test_must_fail test -d d ' -test_expect_failure 'merge-recursive simple w/submodule' ' +test_expect_success 'merge-recursive simple w/submodule' ' git checkout submod && git merge remove ' -test_expect_failure 'merge-recursive simple w/submodule result' ' +test_expect_success 'merge-recursive simple w/submodule result' ' git ls-files -s >actual && ( @@ -629,5 +629,53 @@ test_expect_failure 'merge-recursive rename vs. rename/symlink' ' test_cmp expected actual ' +test_expect_success 'merging with triple rename across D/F conflict' ' + git reset --hard HEAD && + git checkout -b main && + git rm -rf . && + + echo "just a file" >sub1 && + mkdir -p sub2 && + echo content1 >sub2/file1 && + echo content2 >sub2/file2 && + echo content3 >sub2/file3 && + mkdir simple && + echo base >simple/bar && + git add -A && + test_tick && + git commit -m base && + + git checkout -b other && + echo more >>simple/bar && + test_tick && + git commit -a -m changesimplefile && + + git checkout main && + git rm sub1 && + git mv sub2 sub1 && + test_tick && + git commit -m changefiletodir && + + test_tick && + git merge other +' + +test_expect_success 'merge-recursive remembers the names of all base trees' ' + git reset --hard HEAD && + + # more trees than static slots used by oid_to_hex() + for commit in $c0 $c2 $c4 $c5 $c6 $c7 + do + git rev-parse "$commit^{tree}" + done >trees && + + # ignore the return code -- it only fails because the input is weird + test_must_fail git -c merge.verbosity=5 merge-recursive $(cat trees) -- $c1 $c3 >out && + + # merge-recursive prints in reverse order, but we do not care + sort <trees >expect && + sed -n "s/^virtual //p" out | sort >actual && + test_cmp expect actual +' test_done diff --git a/t/t3032-merge-recursive-options.sh b/t/t3032-merge-recursive-space-options.sh index 4029c9c8c0..b56180ee4a 100755 --- a/t/t3032-merge-recursive-options.sh +++ b/t/t3032-merge-recursive-space-options.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='merge-recursive options +test_description='merge-recursive space options * [master] Clarify ! [remote] Remove cruft diff --git a/t/t3033-merge-toplevel.sh b/t/t3033-merge-toplevel.sh index 46aadc410b..d314599428 100755 --- a/t/t3033-merge-toplevel.sh +++ b/t/t3033-merge-toplevel.sh @@ -19,6 +19,8 @@ test_expect_success setup ' test_commit three && git checkout right && test_commit four && + git checkout --orphan newroot && + test_commit five && git checkout master ' @@ -133,4 +135,18 @@ test_expect_success 'merge FETCH_HEAD octopus non-fast-forward' ' test_cmp expect actual ' +# two-project merge +test_expect_success 'refuse two-project merge by default' ' + t3033_reset && + git reset --hard four && + test_must_fail git merge five +' + +test_expect_success 'two-project merge with --allow-unrelated-histories' ' + t3033_reset && + git reset --hard four && + git merge --allow-unrelated-histories five && + git diff --exit-code five +' + test_done diff --git a/t/t3034-merge-recursive-rename-options.sh b/t/t3034-merge-recursive-rename-options.sh new file mode 100755 index 0000000000..b9c4028496 --- /dev/null +++ b/t/t3034-merge-recursive-rename-options.sh @@ -0,0 +1,312 @@ +#!/bin/sh + +test_description='merge-recursive rename options + +Test rename detection by examining rename/delete conflicts. + +* (HEAD -> rename) rename +| * (master) delete +|/ +* base + +git diff --name-status base master +D 0-old +D 1-old +D 2-old +D 3-old + +git diff --name-status -M01 base rename +R025 0-old 0-new +R050 1-old 1-new +R075 2-old 2-new +R100 3-old 3-new + +Actual similarity indices are parsed from diff output. We rely on the fact that +they are rounded down (see, e.g., Documentation/diff-generate-patch.txt, which +mentions this in a different context). +' + +. ./test-lib.sh + +get_expected_stages () { + git checkout rename -- $1-new && + git ls-files --stage $1-new >expected-stages-undetected-$1 && + sed "s/ 0 / 2 /" <expected-stages-undetected-$1 \ + >expected-stages-detected-$1 && + git read-tree -u --reset HEAD +} + +rename_detected () { + git ls-files --stage $1-old $1-new >stages-actual-$1 && + test_cmp expected-stages-detected-$1 stages-actual-$1 +} + +rename_undetected () { + git ls-files --stage $1-old $1-new >stages-actual-$1 && + test_cmp expected-stages-undetected-$1 stages-actual-$1 +} + +check_common () { + git ls-files --stage >stages-actual && + test_line_count = 4 stages-actual +} + +check_threshold_0 () { + check_common && + rename_detected 0 && + rename_detected 1 && + rename_detected 2 && + rename_detected 3 +} + +check_threshold_1 () { + check_common && + rename_undetected 0 && + rename_detected 1 && + rename_detected 2 && + rename_detected 3 +} + +check_threshold_2 () { + check_common && + rename_undetected 0 && + rename_undetected 1 && + rename_detected 2 && + rename_detected 3 +} + +check_exact_renames () { + check_common && + rename_undetected 0 && + rename_undetected 1 && + rename_undetected 2 && + rename_detected 3 +} + +check_no_renames () { + check_common && + rename_undetected 0 && + rename_undetected 1 && + rename_undetected 2 && + rename_undetected 3 +} + +test_expect_success 'setup repo' ' + cat <<-\EOF >3-old && + 33a + 33b + 33c + 33d + EOF + sed s/33/22/ <3-old >2-old && + sed s/33/11/ <3-old >1-old && + sed s/33/00/ <3-old >0-old && + git add [0-3]-old && + git commit -m base && + git rm [0-3]-old && + git commit -m delete && + git checkout -b rename HEAD^ && + cp 3-old 3-new && + sed 1,1s/./x/ <2-old >2-new && + sed 1,2s/./x/ <1-old >1-new && + sed 1,3s/./x/ <0-old >0-new && + git add [0-3]-new && + git rm [0-3]-old && + git commit -m rename && + get_expected_stages 0 && + get_expected_stages 1 && + get_expected_stages 2 && + get_expected_stages 3 && + check_50="false" && + tail="HEAD^ -- HEAD master" +' + +test_expect_success 'setup thresholds' ' + git diff --name-status -M01 HEAD^ HEAD >diff-output && + test_debug "cat diff-output" && + test_line_count = 4 diff-output && + grep "R[0-9][0-9][0-9] \([0-3]\)-old \1-new" diff-output \ + >grep-output && + test_cmp diff-output grep-output && + th0=$(sed -n "s/R\(...\) 0-old 0-new/\1/p" <diff-output) && + th1=$(sed -n "s/R\(...\) 1-old 1-new/\1/p" <diff-output) && + th2=$(sed -n "s/R\(...\) 2-old 2-new/\1/p" <diff-output) && + th3=$(sed -n "s/R\(...\) 3-old 3-new/\1/p" <diff-output) && + test "$th0" -lt "$th1" && + test "$th1" -lt "$th2" && + test "$th2" -lt "$th3" && + test "$th3" = 100 && + if test 50 -le "$th0" + then + check_50=check_threshold_0 + elif test 50 -le "$th1" + then + check_50=check_threshold_1 + elif test 50 -le "$th2" + then + check_50=check_threshold_2 + fi && + th0="$th0%" && + th1="$th1%" && + th2="$th2%" && + th3="$th3%" +' + +test_expect_success 'assumption for tests: rename detection with diff' ' + git diff --name-status -M$th0 --diff-filter=R HEAD^ HEAD \ + >diff-output-0 && + git diff --name-status -M$th1 --diff-filter=R HEAD^ HEAD \ + >diff-output-1 && + git diff --name-status -M$th2 --diff-filter=R HEAD^ HEAD \ + >diff-output-2 && + git diff --name-status -M100% --diff-filter=R HEAD^ HEAD \ + >diff-output-3 && + test_line_count = 4 diff-output-0 && + test_line_count = 3 diff-output-1 && + test_line_count = 2 diff-output-2 && + test_line_count = 1 diff-output-3 +' + +test_expect_success 'default similarity threshold is 50%' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive $tail && + $check_50 +' + +test_expect_success 'low rename threshold' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --find-renames=$th0 $tail && + check_threshold_0 +' + +test_expect_success 'medium rename threshold' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --find-renames=$th1 $tail && + check_threshold_1 +' + +test_expect_success 'high rename threshold' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --find-renames=$th2 $tail && + check_threshold_2 +' + +test_expect_success 'exact renames only' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --find-renames=100% $tail && + check_exact_renames +' + +test_expect_success 'rename threshold is truncated' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --find-renames=200% $tail && + check_exact_renames +' + +test_expect_success 'disabled rename detection' ' + git read-tree --reset -u HEAD && + git merge-recursive --no-renames $tail && + check_no_renames +' + +test_expect_success 'last wins in --find-renames=<m> --find-renames=<n>' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive \ + --find-renames=$th0 --find-renames=$th2 $tail && + check_threshold_2 +' + +test_expect_success '--find-renames resets threshold' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive \ + --find-renames=$th0 --find-renames $tail && + $check_50 +' + +test_expect_success 'last wins in --no-renames --find-renames' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --no-renames --find-renames $tail && + $check_50 +' + +test_expect_success 'last wins in --find-renames --no-renames' ' + git read-tree --reset -u HEAD && + git merge-recursive --find-renames --no-renames $tail && + check_no_renames +' + +test_expect_success 'assumption for further tests: trivial merge succeeds' ' + git read-tree --reset -u HEAD && + git merge-recursive HEAD -- HEAD HEAD && + git diff --quiet --cached && + git merge-recursive --find-renames=$th0 HEAD -- HEAD HEAD && + git diff --quiet --cached && + git merge-recursive --find-renames=$th2 HEAD -- HEAD HEAD && + git diff --quiet --cached && + git merge-recursive --find-renames=100% HEAD -- HEAD HEAD && + git diff --quiet --cached && + git merge-recursive --no-renames HEAD -- HEAD HEAD && + git diff --quiet --cached +' + +test_expect_success '--find-renames rejects negative argument' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --find-renames=-25 \ + HEAD -- HEAD HEAD && + git diff --quiet --cached +' + +test_expect_success '--find-renames rejects non-numbers' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --find-renames=0xf \ + HEAD -- HEAD HEAD && + git diff --quiet --cached +' + +test_expect_success 'rename-threshold=<n> is a synonym for find-renames=<n>' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --rename-threshold=$th0 $tail && + check_threshold_0 +' + +test_expect_success 'last wins in --no-renames --rename-threshold=<n>' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --no-renames --rename-threshold=$th0 $tail && + check_threshold_0 +' + +test_expect_success 'last wins in --rename-threshold=<n> --no-renames' ' + git read-tree --reset -u HEAD && + git merge-recursive --rename-threshold=$th0 --no-renames $tail && + check_no_renames +' + +test_expect_success '--rename-threshold=<n> rejects negative argument' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --rename-threshold=-25 \ + HEAD -- HEAD HEAD && + git diff --quiet --cached +' + +test_expect_success '--rename-threshold=<n> rejects non-numbers' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --rename-threshold=0xf \ + HEAD -- HEAD HEAD && + git diff --quiet --cached +' + +test_expect_success 'last wins in --rename-threshold=<m> --find-renames=<n>' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive \ + --rename-threshold=$th0 --find-renames=$th2 $tail && + check_threshold_2 +' + +test_expect_success 'last wins in --find-renames=<m> --rename-threshold=<n>' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive \ + --find-renames=$th2 --rename-threshold=$th0 $tail && + check_threshold_0 +' + +test_done diff --git a/t/t3100-ls-tree-restrict.sh b/t/t3100-ls-tree-restrict.sh index eb73c06a4e..325114f8fe 100755 --- a/t/t3100-ls-tree-restrict.sh +++ b/t/t3100-ls-tree-restrict.sh @@ -28,7 +28,7 @@ test_expect_success \ echo Mi >path2/baz/b && find path? \( -type f -o -type l \) -print | xargs git update-index --add && - tree=`git write-tree` && + tree=$(git write-tree) && echo $tree' test_output () { diff --git a/t/t3101-ls-tree-dirname.sh b/t/t3101-ls-tree-dirname.sh index 026f9f89d9..327ded4000 100755 --- a/t/t3101-ls-tree-dirname.sh +++ b/t/t3101-ls-tree-dirname.sh @@ -16,7 +16,7 @@ This test runs git ls-tree with the following in a tree. path3/1.txt - a file in a directory path3/2.txt - a file in a directory -Test the handling of mulitple directories which have matching file +Test the handling of multiple directories which have matching file entries. Also test odd filename and missing entries handling. ' . ./test-lib.sh @@ -35,7 +35,7 @@ test_expect_success 'setup' ' echo 222 >path3/2.txt && find *.txt path* \( -type f -o -type l \) -print | xargs git update-index --add && - tree=`git write-tree` && + tree=$(git write-tree) && echo $tree ' diff --git a/t/t3102-ls-tree-wildcards.sh b/t/t3102-ls-tree-wildcards.sh index 4d4b02e760..e804377f1c 100755 --- a/t/t3102-ls-tree-wildcards.sh +++ b/t/t3102-ls-tree-wildcards.sh @@ -12,16 +12,16 @@ test_expect_success 'setup' ' ' test_expect_success 'ls-tree a[a] matches literally' ' - cat >expect <<-\EOF && - 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a[a]/three + cat >expect <<-EOF && + 100644 blob $EMPTY_BLOB a[a]/three EOF git ls-tree -r HEAD "a[a]" >actual && test_cmp expect actual ' test_expect_success 'ls-tree outside prefix' ' - cat >expect <<-\EOF && - 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 ../a[a]/three + cat >expect <<-EOF && + 100644 blob $EMPTY_BLOB ../a[a]/three EOF ( cd aa && git ls-tree -r HEAD "../a[a]"; ) >actual && test_cmp expect actual diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index ddea49808d..8a833f354e 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -59,7 +59,7 @@ test_expect_success 'git branch -l d/e/f should create a branch and a log' ' test_expect_success 'git branch -d d/e/f should delete a branch and a log' ' git branch -d d/e/f && test_path_is_missing .git/refs/heads/d/e/f && - test_path_is_missing .git/logs/refs/heads/d/e/f + test_must_fail git reflog exists refs/heads/d/e/f ' test_expect_success 'git branch j/k should work after branch j has been deleted' ' @@ -79,16 +79,25 @@ test_expect_success 'git branch -m dumps usage' ' test_i18ngrep "branch name required" err ' +test_expect_success 'git branch -m m broken_symref should work' ' + test_when_finished "git branch -D broken_symref" && + git branch -l m && + git symbolic-ref refs/heads/broken_symref refs/heads/i_am_broken && + git branch -m m broken_symref && + git reflog exists refs/heads/broken_symref && + test_must_fail git reflog exists refs/heads/i_am_broken +' + test_expect_success 'git branch -m m m/m should work' ' git branch -l m && git branch -m m m/m && - test_path_is_file .git/logs/refs/heads/m/m + git reflog exists refs/heads/m/m ' test_expect_success 'git branch -m n/n n should work' ' git branch -l n/n && git branch -m n/n n && - test_path_is_file .git/logs/refs/heads/n + git reflog exists refs/heads/n ' test_expect_success 'git branch -m o/o o should fail when o/p exists' ' @@ -126,7 +135,28 @@ test_expect_success 'git branch -M foo bar should fail when bar is checked out' test_expect_success 'git branch -M baz bam should succeed when baz is checked out' ' git checkout -b baz && git branch bam && - git branch -M baz bam + git branch -M baz bam && + test $(git rev-parse --abbrev-ref HEAD) = bam +' + +test_expect_success 'git branch -M baz bam should succeed when baz is checked out as linked working tree' ' + git checkout master && + git worktree add -b baz bazdir && + git worktree add -f bazdir2 baz && + git branch -M baz bam && + test $(git -C bazdir rev-parse --abbrev-ref HEAD) = bam && + test $(git -C bazdir2 rev-parse --abbrev-ref HEAD) = bam +' + +test_expect_success 'git branch -M baz bam should succeed within a worktree in which baz is checked out' ' + git checkout -b baz && + git worktree add -f bazdir3 baz && + ( + cd bazdir3 && + git branch -M baz bam && + test $(git rev-parse --abbrev-ref HEAD) = bam + ) && + test $(git rev-parse --abbrev-ref HEAD) = bam ' test_expect_success 'git branch -M master should work when master is checked out' ' @@ -267,12 +297,12 @@ git config branch.s/s.dummy Hello test_expect_success 'git branch -m s/s s should work when s/t is deleted' ' git branch -l s/s && - test_path_is_file .git/logs/refs/heads/s/s && + git reflog exists refs/heads/s/s && git branch -l s/t && - test_path_is_file .git/logs/refs/heads/s/t && + git reflog exists refs/heads/s/t && git branch -d s/t && git branch -m s/s s && - test_path_is_file .git/logs/refs/heads/s + git reflog exists refs/heads/s ' test_expect_success 'config information was renamed, too' ' @@ -403,6 +433,12 @@ test_expect_success 'test deleting branch without config' ' test_i18ncmp expect actual ' +test_expect_success 'deleting currently checked out branch fails' ' + git worktree add -b my7 my7 && + test_must_fail git -C my7 branch -d my7 && + test_must_fail git branch -d my7 +' + test_expect_success 'test --track without .fetch entries' ' git branch --track my8 && test "$(git config branch.my8.remote)" && @@ -446,6 +482,13 @@ test_expect_success '--set-upstream-to fails on a non-ref' ' test_must_fail git branch --set-upstream-to HEAD^{} ' +test_expect_success '--set-upstream-to fails on locked config' ' + test_when_finished "rm -f .git/config.lock" && + >.git/config.lock && + git branch locked && + test_must_fail git branch --set-upstream-to locked +' + test_expect_success 'use --set-upstream-to modify HEAD' ' test_config branch.master.remote foo && test_config branch.master.merge foo && @@ -466,6 +509,13 @@ test_expect_success '--unset-upstream should fail if given a non-existent branch test_must_fail git branch --unset-upstream i-dont-exist ' +test_expect_success '--unset-upstream should fail if config is locked' ' + test_when_finished "rm -f .git/config.lock" && + git branch --set-upstream-to locked && + >.git/config.lock && + test_must_fail git branch --unset-upstream +' + test_expect_success 'test --unset-upstream on HEAD' ' git branch my14 && test_config branch.master.remote foo && @@ -509,7 +559,7 @@ If you wanted to make '"'master'"' track '"'origin/master'"', do this: git branch -d origin/master git branch --set-upstream-to origin/master EOF - test_cmp expected actual + test_i18ncmp expected actual ' test_expect_success '--set-upstream with two args only shows the deprecation message' ' @@ -518,7 +568,7 @@ test_expect_success '--set-upstream with two args only shows the deprecation mes cat >expected <<EOF && The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to EOF - test_cmp expected actual + test_i18ncmp expected actual ' test_expect_success '--set-upstream with one arg only shows the deprecation message if the branch existed' ' @@ -527,7 +577,7 @@ test_expect_success '--set-upstream with one arg only shows the deprecation mess cat >expected <<EOF && The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to EOF - test_cmp expected actual + test_i18ncmp expected actual ' test_expect_success '--set-upstream-to notices an error to set branch as own upstream' ' @@ -579,7 +629,7 @@ test_expect_success 'avoid ambiguous track' ' git config remote.ambi1.fetch refs/heads/lalala:refs/heads/master && git config remote.ambi2.url lilili && git config remote.ambi2.fetch refs/heads/lilili:refs/heads/master && - git branch all1 master && + test_must_fail git branch all1 master && test -z "$(git config branch.all1.merge)" ' diff --git a/t/t3201-branch-contains.sh b/t/t3201-branch-contains.sh index 912a6635a8..7f3ec47241 100755 --- a/t/t3201-branch-contains.sh +++ b/t/t3201-branch-contains.sh @@ -156,7 +156,7 @@ test_expect_success 'branch --merged with --verbose' ' * topic 2c939f4 [ahead 1] foo zzz c77a0a9 second on master EOF - test_cmp expect actual + test_i18ncmp expect actual ' test_done diff --git a/t/t3203-branch-output.sh b/t/t3203-branch-output.sh index f51d0f3cad..52283dfc8c 100755 --- a/t/t3203-branch-output.sh +++ b/t/t3203-branch-output.sh @@ -89,6 +89,11 @@ test_expect_success 'git branch --list -v pattern shows branch summaries' ' awk "{print \$NF}" <tmp >actual && test_cmp expect actual ' +test_expect_success 'git branch --ignore-case --list -v pattern shows branch summaries' ' + git branch --list --ignore-case -v BRANCH* >tmp && + awk "{print \$NF}" <tmp >actual && + test_cmp expect actual +' test_expect_success 'git branch -v pattern does not show branch summaries' ' test_must_fail git branch -v branch* @@ -106,6 +111,19 @@ EOF test_i18ncmp expect actual ' +test_expect_success 'git branch shows detached HEAD properly after checkout --detach' ' + git checkout master && + cat >expect <<EOF && +* (HEAD detached at $(git rev-parse --short HEAD^0)) + branch-one + branch-two + master +EOF + git checkout --detach && + git branch >actual && + test_i18ncmp expect actual +' + test_expect_success 'git branch shows detached HEAD properly after moving' ' cat >expect <<EOF && * (HEAD detached from $(git rev-parse --short HEAD)) @@ -143,4 +161,68 @@ EOF test_i18ncmp expect actual ' +test_expect_success 'git branch `--sort` option' ' + cat >expect <<-\EOF && + * (HEAD detached from fromtag) + branch-two + branch-one + master + EOF + git branch --sort=objectsize >actual && + test_i18ncmp expect actual +' + +test_expect_success 'git branch --points-at option' ' + cat >expect <<-\EOF && + branch-one + master + EOF + git branch --points-at=branch-one >actual && + test_cmp expect actual +' + +test_expect_success 'ambiguous branch/tag not marked' ' + git tag ambiguous && + git branch ambiguous && + echo " ambiguous" >expect && + git branch --list ambiguous >actual && + test_cmp expect actual +' + +test_expect_success 'local-branch symrefs shortened properly' ' + git symbolic-ref refs/heads/ref-to-branch refs/heads/branch-one && + git symbolic-ref refs/heads/ref-to-remote refs/remotes/origin/branch-one && + cat >expect <<-\EOF && + ref-to-branch -> branch-one + ref-to-remote -> refs/remotes/origin/branch-one + EOF + git branch >actual.raw && + grep ref-to <actual.raw >actual && + test_cmp expect actual +' + +test_expect_success 'sort branches, ignore case' ' + ( + git init sort-icase && + cd sort-icase && + test_commit initial && + git branch branch-one && + git branch BRANCH-two && + git branch --list | awk "{print \$NF}" >actual && + cat >expected <<-\EOF && + BRANCH-two + branch-one + master + EOF + test_cmp expected actual && + git branch --list -i | awk "{print \$NF}" >actual && + cat >expected <<-\EOF && + branch-one + BRANCH-two + master + EOF + test_cmp expected actual + ) +' + test_done diff --git a/t/t3210-pack-refs.sh b/t/t3210-pack-refs.sh index 8aae98d482..9b182a0c32 100755 --- a/t/t3210-pack-refs.sh +++ b/t/t3210-pack-refs.sh @@ -27,7 +27,7 @@ SHA1= test_expect_success \ 'see if git show-ref works as expected' \ 'git branch a && - SHA1=`cat .git/refs/heads/a` && + SHA1=$(cat .git/refs/heads/a) && echo "$SHA1 refs/heads/a" >expect && git show-ref a >result && test_cmp expect result' @@ -160,6 +160,13 @@ test_expect_success 'pack ref directly below refs/' ' test_path_is_missing .git/refs/top ' +test_expect_success 'do not pack ref in refs/bisect' ' + git update-ref refs/bisect/local HEAD && + git pack-refs --all --prune && + ! grep refs/bisect/local .git/packed-refs >/dev/null && + test_path_is_file .git/refs/bisect/local +' + test_expect_success 'disable reflogs' ' git config core.logallrefupdates false && rm -rf .git/logs @@ -169,7 +176,7 @@ test_expect_success 'create packed foo/bar/baz branch' ' git branch foo/bar/baz && git pack-refs --all --prune && test_path_is_missing .git/refs/heads/foo/bar/baz && - test_path_is_missing .git/logs/refs/heads/foo/bar/baz + test_must_fail git reflog exists refs/heads/foo/bar/baz ' test_expect_success 'notice d/f conflict with existing directory' ' diff --git a/t/t3300-funny-names.sh b/t/t3300-funny-names.sh index 9a146f1335..04de03cad0 100755 --- a/t/t3300-funny-names.sh +++ b/t/t3300-funny-names.sh @@ -13,6 +13,7 @@ tree, index, and tree objects. HT=' ' +test_have_prereq MINGW || echo 2>/dev/null > "Name with an${HT}HT" if ! test -f "Name with an${HT}HT" then diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh index 8cffd35fb0..2d200fdf36 100755 --- a/t/t3301-notes.sh +++ b/t/t3301-notes.sh @@ -83,6 +83,16 @@ test_expect_success 'edit existing notes' ' test_must_fail git notes show HEAD^ ' +test_expect_success 'show notes from treeish' ' + test "b3" = "$(git notes --ref commits^{tree} show)" && + test "b4" = "$(git notes --ref commits@{1} show)" +' + +test_expect_success 'cannot edit notes from non-ref' ' + test_must_fail git notes --ref commits^{tree} edit && + test_must_fail git notes --ref commits@{1} edit +' + test_expect_success 'cannot "git notes add -m" where notes already exists' ' test_must_fail git notes add -m "b2" && test_path_is_missing .git/NOTES_EDITMSG && @@ -1122,6 +1132,12 @@ test_expect_success 'git notes copy diagnoses too many or too few parameters' ' test_must_fail git notes copy one two three ' +test_expect_success 'git notes get-ref expands refs/heads/master to refs/notes/refs/heads/master' ' + test_unconfig core.notesRef && + sane_unset GIT_NOTES_REF && + test "$(git notes --ref=refs/heads/master get-ref)" = "refs/notes/refs/heads/master" +' + test_expect_success 'git notes get-ref (no overrides)' ' test_unconfig core.notesRef && sane_unset GIT_NOTES_REF && diff --git a/t/t3308-notes-merge.sh b/t/t3308-notes-merge.sh index 24d82b49bb..19aed7ec95 100755 --- a/t/t3308-notes-merge.sh +++ b/t/t3308-notes-merge.sh @@ -18,7 +18,9 @@ test_expect_success setup ' git notes add -m "Notes on 1st commit" 1st && git notes add -m "Notes on 2nd commit" 2nd && git notes add -m "Notes on 3rd commit" 3rd && - git notes add -m "Notes on 4th commit" 4th + git notes add -m "Notes on 4th commit" 4th && + # Copy notes to remote-notes + git fetch . refs/notes/*:refs/remote-notes/origin/* ' commit_sha1=$(git rev-parse 1st^{commit}) @@ -66,7 +68,9 @@ test_expect_success 'verify initial notes (x)' ' ' cp expect_notes_x expect_notes_y +cp expect_notes_x expect_notes_v cp expect_log_x expect_log_y +cp expect_log_x expect_log_v test_expect_success 'fail to merge empty notes ref into empty notes ref (z => y)' ' test_must_fail git -c "core.notesRef=refs/notes/y" notes merge z @@ -84,16 +88,12 @@ test_expect_success 'fail to merge into various non-notes refs' ' test_must_fail git -c "core.notesRef=refs/notes/foo^{bar" notes merge x ' -test_expect_success 'fail to merge various non-note-trees' ' - git config core.notesRef refs/notes/y && - test_must_fail git notes merge refs/notes && - test_must_fail git notes merge refs/notes/ && - test_must_fail git notes merge refs/notes/dir && - test_must_fail git notes merge refs/notes/dir/ && - test_must_fail git notes merge refs/heads/master && - test_must_fail git notes merge x: && - test_must_fail git notes merge x:foo && - test_must_fail git notes merge foo^{bar +test_expect_success 'merge non-notes ref into empty notes ref (remote-notes/origin/x => v)' ' + git config core.notesRef refs/notes/v && + git notes merge refs/remote-notes/origin/x && + verify_notes v && + # refs/remote-notes/origin/x and v should point to the same notes commit + test "$(git rev-parse refs/remote-notes/origin/x)" = "$(git rev-parse refs/notes/v)" ' test_expect_success 'merge notes into empty notes ref (x => y)' ' diff --git a/t/t3309-notes-merge-auto-resolve.sh b/t/t3309-notes-merge-auto-resolve.sh index 461fd84755..14c2adf970 100755 --- a/t/t3309-notes-merge-auto-resolve.sh +++ b/t/t3309-notes-merge-auto-resolve.sh @@ -298,6 +298,13 @@ test_expect_success 'merge z into y with invalid strategy => Fail/No changes' ' verify_notes y y ' +test_expect_success 'merge z into y with invalid configuration option => Fail/No changes' ' + git config core.notesRef refs/notes/y && + test_must_fail git -c notes.mergeStrategy="foo" notes merge z && + # Verify no changes (y) + verify_notes y y +' + cat <<EOF | sort >expect_notes_ours 68b8630d25516028bed862719855b3d6768d7833 $commit_sha15 5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 @@ -365,6 +372,28 @@ test_expect_success 'reset to pre-merge state (y)' ' verify_notes y y ' +test_expect_success 'merge z into y with "ours" configuration option => Non-conflicting 3-way merge' ' + git -c notes.mergeStrategy="ours" notes merge z && + verify_notes y ours +' + +test_expect_success 'reset to pre-merge state (y)' ' + git update-ref refs/notes/y refs/notes/y^1 && + # Verify pre-merge state + verify_notes y y +' + +test_expect_success 'merge z into y with "ours" per-ref configuration option => Non-conflicting 3-way merge' ' + git -c notes.y.mergeStrategy="ours" notes merge z && + verify_notes y ours +' + +test_expect_success 'reset to pre-merge state (y)' ' + git update-ref refs/notes/y refs/notes/y^1 && + # Verify pre-merge state + verify_notes y y +' + cat <<EOF | sort >expect_notes_theirs 9b4b2c61f0615412da3c10f98ff85b57c04ec765 $commit_sha15 5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 @@ -432,6 +461,17 @@ test_expect_success 'reset to pre-merge state (y)' ' verify_notes y y ' +test_expect_success 'merge z into y with "theirs" strategy overriding configuration option "ours" => Non-conflicting 3-way merge' ' + git -c notes.mergeStrategy="ours" notes merge --strategy=theirs z && + verify_notes y theirs +' + +test_expect_success 'reset to pre-merge state (y)' ' + git update-ref refs/notes/y refs/notes/y^1 && + # Verify pre-merge state + verify_notes y y +' + cat <<EOF | sort >expect_notes_union 7c4e546efd0fe939f876beb262ece02797880b54 $commit_sha15 5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 @@ -505,6 +545,34 @@ test_expect_success 'reset to pre-merge state (y)' ' verify_notes y y ' +test_expect_success 'merge z into y with "union" strategy overriding per-ref configuration => Non-conflicting 3-way merge' ' + git -c notes.y.mergeStrategy="theirs" notes merge --strategy=union z && + verify_notes y union +' + +test_expect_success 'reset to pre-merge state (y)' ' + git update-ref refs/notes/y refs/notes/y^1 && + # Verify pre-merge state + verify_notes y y +' + +test_expect_success 'merge z into y with "union" per-ref overriding general configuration => Non-conflicting 3-way merge' ' + git -c notes.y.mergeStrategy="union" -c notes.mergeStrategy="theirs" notes merge z && + verify_notes y union +' + +test_expect_success 'reset to pre-merge state (y)' ' + git update-ref refs/notes/y refs/notes/y^1 && + # Verify pre-merge state + verify_notes y y +' + +test_expect_success 'merge z into y with "manual" per-ref only checks specific ref configuration => Conflicting 3-way merge' ' + test_must_fail git -c notes.z.mergeStrategy="union" notes merge z && + git notes merge --abort && + verify_notes y y +' + cat <<EOF | sort >expect_notes_union2 d682107b8bf7a7aea1e537a8d5cb6a12b60135f1 $commit_sha15 5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 @@ -644,4 +712,15 @@ test_expect_success 'merge y into z with "cat_sort_uniq" strategy => Non-conflic verify_notes z cat_sort_uniq ' +test_expect_success 'reset to pre-merge state (z)' ' + git update-ref refs/notes/z refs/notes/z^1 && + # Verify pre-merge state + verify_notes z z +' + +test_expect_success 'merge y into z with "cat_sort_uniq" strategy configuration option => Non-conflicting 3-way merge' ' + git -c notes.mergeStrategy="cat_sort_uniq" notes merge y && + verify_notes z cat_sort_uniq +' + test_done diff --git a/t/t3310-notes-merge-manual-resolve.sh b/t/t3310-notes-merge-manual-resolve.sh index 195bb97f85..baef2d6924 100755 --- a/t/t3310-notes-merge-manual-resolve.sh +++ b/t/t3310-notes-merge-manual-resolve.sh @@ -178,7 +178,7 @@ test_expect_success 'merge z into m (== y) with default ("manual") resolver => C git config core.notesRef refs/notes/m && test_must_fail git notes merge z >output && # Output should point to where to resolve conflicts - grep -q "\\.git/NOTES_MERGE_WORKTREE" output && + test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts ls .git/NOTES_MERGE_WORKTREE >output_conflicts && test_cmp expect_conflicts output_conflicts && @@ -225,7 +225,7 @@ test_expect_success 'cannot do merge w/conflicts when previous merge is unfinish test -d .git/NOTES_MERGE_WORKTREE && test_must_fail git notes merge z >output 2>&1 && # Output should indicate what is wrong - grep -q "\\.git/NOTES_MERGE_\\* exists" output + test_i18ngrep -q "\\.git/NOTES_MERGE_\\* exists" output ' # Setup non-conflicting merge between x and new notes ref w @@ -314,6 +314,18 @@ y and z notes on 1st commit EOF +test_expect_success 'do not allow mixing --commit and --abort' ' + test_must_fail git notes merge --commit --abort +' + +test_expect_success 'do not allow mixing --commit and --strategy' ' + test_must_fail git notes merge --commit --strategy theirs +' + +test_expect_success 'do not allow mixing --abort and --strategy' ' + test_must_fail git notes merge --abort --strategy theirs +' + test_expect_success 'finalize conflicting merge (z => m)' ' # Resolve conflicts and finalize merge cat >.git/NOTES_MERGE_WORKTREE/$commit_sha1 <<EOF && @@ -369,7 +381,7 @@ test_expect_success 'redo merge of z into m (== y) with default ("manual") resol git config core.notesRef refs/notes/m && test_must_fail git notes merge z >output && # Output should point to where to resolve conflicts - grep -q "\\.git/NOTES_MERGE_WORKTREE" output && + test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts ls .git/NOTES_MERGE_WORKTREE >output_conflicts && test_cmp expect_conflicts output_conflicts && @@ -403,7 +415,7 @@ git rev-parse refs/notes/z > pre_merge_z test_expect_success 'redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge' ' test_must_fail git notes merge z >output && # Output should point to where to resolve conflicts - grep -q "\\.git/NOTES_MERGE_WORKTREE" output && + test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts ls .git/NOTES_MERGE_WORKTREE >output_conflicts && test_cmp expect_conflicts output_conflicts && @@ -484,7 +496,7 @@ test_expect_success 'redo merge of z into m (== y) with default ("manual") resol git update-ref refs/notes/m refs/notes/y && test_must_fail git notes merge z >output && # Output should point to where to resolve conflicts - grep -q "\\.git/NOTES_MERGE_WORKTREE" output && + test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts ls .git/NOTES_MERGE_WORKTREE >output_conflicts && test_cmp expect_conflicts output_conflicts && diff --git a/t/t3320-notes-merge-worktrees.sh b/t/t3320-notes-merge-worktrees.sh new file mode 100755 index 0000000000..b9c3bc2487 --- /dev/null +++ b/t/t3320-notes-merge-worktrees.sh @@ -0,0 +1,72 @@ +#!/bin/sh +# +# Copyright (c) 2015 Twitter, Inc +# + +test_description='Test merging of notes trees in multiple worktrees' + +. ./test-lib.sh + +test_expect_success 'setup commit' ' + test_commit tantrum +' + +commit_tantrum=$(git rev-parse tantrum^{commit}) + +test_expect_success 'setup notes ref (x)' ' + git config core.notesRef refs/notes/x && + git notes add -m "x notes on tantrum" tantrum +' + +test_expect_success 'setup local branch (y)' ' + git update-ref refs/notes/y refs/notes/x && + git config core.notesRef refs/notes/y && + git notes remove tantrum +' + +test_expect_success 'setup remote branch (z)' ' + git update-ref refs/notes/z refs/notes/x && + git config core.notesRef refs/notes/z && + git notes add -f -m "conflicting notes on tantrum" tantrum +' + +test_expect_success 'modify notes ref ourselves (x)' ' + git config core.notesRef refs/notes/x && + git notes add -f -m "more conflicting notes on tantrum" tantrum +' + +test_expect_success 'create some new worktrees' ' + git worktree add -b newbranch worktree master && + git worktree add -b newbranch2 worktree2 master +' + +test_expect_success 'merge z into y fails and sets NOTES_MERGE_REF' ' + git config core.notesRef refs/notes/y && + test_must_fail git notes merge z && + echo "ref: refs/notes/y" >expect && + test_cmp .git/NOTES_MERGE_REF expect +' + +test_expect_success 'merge z into y while mid-merge in another workdir fails' ' + ( + cd worktree && + git config core.notesRef refs/notes/y && + test_must_fail git notes merge z 2>err && + test_i18ngrep "a notes merge into refs/notes/y is already in-progress at" err + ) && + test_path_is_missing .git/worktrees/worktree/NOTES_MERGE_REF +' + +test_expect_success 'merge z into x while mid-merge on y succeeds' ' + ( + cd worktree2 && + git config core.notesRef refs/notes/x && + test_must_fail git notes merge z 2>&1 >out && + test_i18ngrep "Automatic notes merge failed" out && + grep -v "A notes merge into refs/notes/x is already in-progress in" out + ) && + echo "ref: refs/notes/x" >expect && + test_cmp .git/worktrees/worktree2/NOTES_MERGE_REF expect +' + +test_done diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 47b5682662..f5fd15e559 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -136,8 +136,8 @@ test_expect_success 'setup: recover' ' test_expect_success 'Show verbose error when HEAD could not be detached' ' >B && test_must_fail git rebase topic 2>output.err >output.out && - grep "The following untracked working tree files would be overwritten by checkout:" output.err && - grep B output.err + test_i18ngrep "The following untracked working tree files would be overwritten by checkout:" output.err && + test_i18ngrep B output.err ' rm -f B diff --git a/t/t3402-rebase-merge.sh b/t/t3402-rebase-merge.sh index 8f64505e4f..488945e007 100755 --- a/t/t3402-rebase-merge.sh +++ b/t/t3402-rebase-merge.sh @@ -85,6 +85,15 @@ test_expect_success 'rebase -Xtheirs' ' ! grep 11 original ' +test_expect_success 'rebase -Xtheirs from orphan' ' + git checkout --orphan orphan-conflicting master~2 && + echo "AB $T" >> original && + git commit -morphan-conflicting original && + git rebase -Xtheirs master && + grep AB original && + ! grep 11 original +' + test_expect_success 'merge and rebase should match' ' git diff-tree -r test-rebase test-merge >difference && if test -s difference diff --git a/t/t3403-rebase-skip.sh b/t/t3403-rebase-skip.sh index 3968020e64..1f5122b632 100755 --- a/t/t3403-rebase-skip.sh +++ b/t/t3403-rebase-skip.sh @@ -67,7 +67,7 @@ test_expect_success 'rebase --skip with --merge' ' ' test_expect_success 'merge and reference trees equal' ' - test -z "`git diff-tree skip-merge skip-reference`" + test -z "$(git diff-tree skip-merge skip-reference)" ' test_expect_success 'moved back to branch correctly' ' diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index ac429a0bbb..c896a4c106 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -60,9 +60,9 @@ test_expect_success 'setup' ' test_commit P fileP ' -# "exec" commands are ran with the user shell by default, but this may +# "exec" commands are run with the user shell by default, but this may # be non-POSIX. For example, if SHELL=zsh then ">file" doesn't work -# to create a file. Unseting SHELL avoids such non-portable behavior +# to create a file. Unsetting SHELL avoids such non-portable behavior # in tests. It must be exported for it to take effect where needed. SHELL= export SHELL @@ -219,9 +219,9 @@ test_expect_success 'abort with error when new base cannot be checked out' ' git commit -m "remove file in base" && set_fake_editor && test_must_fail git rebase -i master > output 2>&1 && - grep "The following untracked working tree files would be overwritten by checkout:" \ + test_i18ngrep "The following untracked working tree files would be overwritten by checkout:" \ output && - grep "file1" output && + test_i18ngrep "file1" output && test_path_is_missing .git/rebase-merge && git reset --hard HEAD^ ' @@ -540,7 +540,7 @@ test_expect_success 'clean error after failed "exec"' ' echo "edited again" > file7 && git add file7 && test_must_fail git rebase --continue 2>error && - grep "You have staged changes in your working tree." error + test_i18ngrep "You have staged changes in your working tree." error ' test_expect_success 'rebase a detached HEAD' ' @@ -555,10 +555,9 @@ test_expect_success 'rebase a detached HEAD' ' test_expect_success 'rebase a commit violating pre-commit' ' mkdir -p .git/hooks && - PRE_COMMIT=.git/hooks/pre-commit && - echo "#!/bin/sh" > $PRE_COMMIT && - echo "test -z \"\$(git diff --cached --check)\"" >> $PRE_COMMIT && - chmod a+x $PRE_COMMIT && + write_script .git/hooks/pre-commit <<-\EOF && + test -z "$(git diff --cached --check)" + EOF echo "monde! " >> file1 && test_tick && test_must_fail git commit -m doesnt-verify file1 && @@ -771,7 +770,6 @@ test_expect_success 'rebase-i history with funny messages' ' test_cmp expect actual ' - test_expect_success 'prepare for rebase -i --exec' ' git checkout master && git checkout -b execute && @@ -780,7 +778,6 @@ test_expect_success 'prepare for rebase -i --exec' ' test_commit three_exec main.txt three_exec ' - test_expect_success 'running "git rebase -i --exec git show HEAD"' ' set_fake_editor && git rebase -i --exec "git show HEAD" HEAD~2 >actual && @@ -793,7 +790,6 @@ test_expect_success 'running "git rebase -i --exec git show HEAD"' ' test_cmp expected actual ' - test_expect_success 'running "git rebase --exec git show HEAD -i"' ' git reset --hard execute && set_fake_editor && @@ -807,7 +803,6 @@ test_expect_success 'running "git rebase --exec git show HEAD -i"' ' test_cmp expected actual ' - test_expect_success 'running "git rebase -ix git show HEAD"' ' git reset --hard execute && set_fake_editor && @@ -835,7 +830,6 @@ test_expect_success 'rebase -ix with several <CMD>' ' test_cmp expected actual ' - test_expect_success 'rebase -ix with several instances of --exec' ' git reset --hard execute && set_fake_editor && @@ -850,7 +844,6 @@ test_expect_success 'rebase -ix with several instances of --exec' ' test_cmp expected actual ' - test_expect_success 'rebase -ix with --autosquash' ' git reset --hard execute && git checkout -b autosquash && @@ -876,16 +869,15 @@ test_expect_success 'rebase -ix with --autosquash' ' test_cmp expected actual ' - -test_expect_success 'rebase --exec without -i shows error message' ' +test_expect_success 'rebase --exec works without -i ' ' git reset --hard execute && - set_fake_editor && - test_must_fail git rebase --exec "git show HEAD" HEAD~2 2>actual && - echo "The --exec option must be used with the --interactive option" >expected && - test_i18ncmp expected actual + rm -rf exec_output && + EDITOR="echo >invoked_editor" git rebase --exec "echo a line >>exec_output" HEAD~2 2>actual && + test_i18ngrep "Successfully rebased and updated" actual && + test_line_count = 2 exec_output && + test_path_is_missing invoked_editor ' - test_expect_success 'rebase -i --exec without <CMD>' ' git reset --hard execute && set_fake_editor && @@ -961,13 +953,13 @@ test_expect_success 'rebase -i produces readable reflog' ' set_fake_editor && git rebase -i --onto I F branch-reflog-test && cat >expect <<-\EOF && - rebase -i (start): checkout I - rebase -i (pick): G - rebase -i (pick): H rebase -i (finish): returning to refs/heads/branch-reflog-test + rebase -i (pick): H + rebase -i (pick): G + rebase -i (start): checkout I EOF - tail -n 4 .git/logs/HEAD | - sed -e "s/.* //" >actual && + git reflog -n4 HEAD | + sed "s/[^:]*: //" >actual && test_cmp expect actual ' @@ -984,6 +976,17 @@ test_expect_success 'rebase -i respects core.commentchar' ' test B = $(git cat-file commit HEAD^ | sed -ne \$p) ' +test_expect_success 'rebase -i respects core.commentchar=auto' ' + test_config core.commentchar auto && + write_script copy-edit-script.sh <<-\EOF && + cp "$1" edit-script + EOF + test_set_editor "$(pwd)/copy-edit-script.sh" && + test_when_finished "git rebase --abort || :" && + git rebase -i HEAD^ && + test -z "$(grep -ve "^#" -e "^\$" -e "^pick" edit-script)" +' + test_expect_success 'rebase -i, with <onto> and <upstream> specified as :/quuxery' ' test_when_finished "git branch -D torebase" && git checkout -b torebase branch1 && @@ -1006,6 +1009,22 @@ test_expect_success 'rebase -i with --strategy and -X' ' test $(cat file1) = Z ' +test_expect_success 'interrupted rebase -i with --strategy and -X' ' + git checkout -b conflict-merge-use-theirs-interrupted conflict-branch && + git reset --hard HEAD^ && + >breakpoint && + git add breakpoint && + git commit -m "breakpoint for interactive mode" && + echo five >conflict && + echo Z >file1 && + git commit -a -m "one file conflict" && + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i --strategy=recursive -Xours conflict-branch && + git rebase --continue && + test $(git show conflict-branch:conflict) = $(cat conflict) && + test $(cat file1) = Z +' + test_expect_success 'rebase -i error on commits with \ in message' ' current_head=$(git rev-parse HEAD) && test_when_finished "git rebase --abort; git reset --hard $current_head; rm -f error" && @@ -1052,7 +1071,7 @@ test_expect_success 'todo count' ' EOF test_set_editor "$(pwd)/dump-raw.sh" && git rebase -i HEAD~4 >actual && - grep "^# Rebase ..* onto ..* ([0-9]" actual + test_i18ngrep "^# Rebase ..* onto ..* ([0-9]" actual ' test_expect_success 'rebase -i commits that overwrite untracked files (pick)' ' @@ -1102,4 +1121,183 @@ test_expect_success 'rebase -i commits that overwrite untracked files (no ff)' ' test $(git cat-file commit HEAD | sed -ne \$p) = I ' +test_expect_success 'rebase --continue removes CHERRY_PICK_HEAD' ' + git checkout -b commit-to-skip && + for double in X 3 1 + do + test_seq 5 | sed "s/$double/&&/" >seq && + git add seq && + test_tick && + git commit -m seq-$double + done && + git tag seq-onto && + git reset --hard HEAD~2 && + git cherry-pick seq-onto && + set_fake_editor && + test_must_fail env FAKE_LINES= git rebase -i seq-onto && + test -d .git/rebase-merge && + git rebase --continue && + git diff --exit-code seq-onto && + test ! -d .git/rebase-merge && + test ! -f .git/CHERRY_PICK_HEAD +' + +rebase_setup_and_clean () { + test_when_finished " + git checkout master && + test_might_fail git branch -D $1 && + test_might_fail git rebase --abort + " && + git checkout -b $1 master +} + +test_expect_success 'drop' ' + rebase_setup_and_clean drop-test && + set_fake_editor && + FAKE_LINES="1 drop 2 3 drop 4 5" git rebase -i --root && + test E = $(git cat-file commit HEAD | sed -ne \$p) && + test C = $(git cat-file commit HEAD^ | sed -ne \$p) && + test A = $(git cat-file commit HEAD^^ | sed -ne \$p) +' + +cat >expect <<EOF +Successfully rebased and updated refs/heads/missing-commit. +EOF + +test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' + test_config rebase.missingCommitsCheck ignore && + rebase_setup_and_clean missing-commit && + set_fake_editor && + FAKE_LINES="1 2 3 4" \ + git rebase -i --root 2>actual && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test_i18ncmp expect actual +' + +cat >expect <<EOF +Warning: some commits may have been dropped accidentally. +Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) +To avoid this message, use "drop" to explicitly remove a commit. + +Use 'git config rebase.missingCommitsCheck' to change the level of warnings. +The possible behaviours are: ignore, warn, error. + +Successfully rebased and updated refs/heads/missing-commit. +EOF + +test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' ' + test_config rebase.missingCommitsCheck warn && + rebase_setup_and_clean missing-commit && + set_fake_editor && + FAKE_LINES="1 2 3 4" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + test D = $(git cat-file commit HEAD | sed -ne \$p) +' + +cat >expect <<EOF +Warning: some commits may have been dropped accidentally. +Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2) +To avoid this message, use "drop" to explicitly remove a commit. + +Use 'git config rebase.missingCommitsCheck' to change the level of warnings. +The possible behaviours are: ignore, warn, error. + +You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. +Or you can abort the rebase with 'git rebase --abort'. +EOF + +test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' ' + test_config rebase.missingCommitsCheck error && + rebase_setup_and_clean missing-commit && + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 4" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + cp .git/rebase-merge/git-rebase-todo.backup \ + .git/rebase-merge/git-rebase-todo && + FAKE_LINES="1 2 drop 3 4 drop 5" \ + git rebase --edit-todo && + git rebase --continue && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test B = $(git cat-file commit HEAD^ | sed -ne \$p) +' + +cat >expect <<EOF +Warning: the command isn't recognized in the following line: + - badcmd $(git rev-list --oneline -1 master~1) + +You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. +Or you can abort the rebase with 'git rebase --abort'. +EOF + +test_expect_success 'static check of bad command' ' + rebase_setup_and_clean bad-cmd && + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo && + git rebase --continue && + test E = $(git cat-file commit HEAD | sed -ne \$p) && + test C = $(git cat-file commit HEAD^ | sed -ne \$p) +' + +test_expect_success 'tabs and spaces are accepted in the todolist' ' + rebase_setup_and_clean indented-comment && + write_script add-indent.sh <<-\EOF && + ( + # Turn single spaces into space/tab mix + sed "1s/ / /g; 2s/ / /g; 3s/ / /g" "$1" + printf "\n\t# comment\n #more\n\t # comment\n" + ) >"$1.new" + mv "$1.new" "$1" + EOF + test_set_editor "$(pwd)/add-indent.sh" && + git rebase -i HEAD^^^ && + test E = $(git cat-file commit HEAD | sed -ne \$p) +' + +cat >expect <<EOF +Warning: the SHA-1 is missing or isn't a commit in the following line: + - edit XXXXXXX False commit + +You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. +Or you can abort the rebase with 'git rebase --abort'. +EOF + +test_expect_success 'static check of bad SHA-1' ' + rebase_setup_and_clean bad-sha && + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + FAKE_LINES="1 2 4 5 6" git rebase --edit-todo && + git rebase --continue && + test E = $(git cat-file commit HEAD | sed -ne \$p) +' + +test_expect_success 'editor saves as CR/LF' ' + git checkout -b with-crlf && + write_script add-crs.sh <<-\EOF && + sed -e "s/\$/Q/" <"$1" | tr Q "\\015" >"$1".new && + mv -f "$1".new "$1" + EOF + ( + test_set_editor "$(pwd)/add-crs.sh" && + git rebase -i HEAD^ + ) +' + +SQ="'" +test_expect_success 'rebase -i --gpg-sign=<key-id>' ' + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ + >out 2>err && + test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err +' + test_done diff --git a/t/t3407-rebase-abort.sh b/t/t3407-rebase-abort.sh index a6a6c40a98..910f218284 100755 --- a/t/t3407-rebase-abort.sh +++ b/t/t3407-rebase-abort.sh @@ -99,4 +99,28 @@ testrebase() { testrebase "" .git/rebase-apply testrebase " --merge" .git/rebase-merge +test_expect_success 'rebase --quit' ' + cd "$work_dir" && + # Clean up the state from the previous one + git reset --hard pre-rebase && + test_must_fail git rebase master && + test_path_is_dir .git/rebase-apply && + head_before=$(git rev-parse HEAD) && + git rebase --quit && + test $(git rev-parse HEAD) = $head_before && + test ! -d .git/rebase-apply +' + +test_expect_success 'rebase --merge --quit' ' + cd "$work_dir" && + # Clean up the state from the previous one + git reset --hard pre-rebase && + test_must_fail git rebase --merge master && + test_path_is_dir .git/rebase-merge && + head_before=$(git rev-parse HEAD) && + git rebase --quit && + test $(git rev-parse HEAD) = $head_before && + test ! -d .git/rebase-merge +' + test_done diff --git a/t/t3412-rebase-root.sh b/t/t3412-rebase-root.sh index 0b52105728..73a39f2923 100755 --- a/t/t3412-rebase-root.sh +++ b/t/t3412-rebase-root.sh @@ -133,7 +133,7 @@ test_expect_success 'set up second root and merge' ' rm A B C && test_commit 6 D && git checkout other && - git merge third + git merge --allow-unrelated-histories third ' cat > expect-third <<'EOF' diff --git a/t/t3415-rebase-autosquash.sh b/t/t3415-rebase-autosquash.sh index 41370ab998..48346f1cc0 100755 --- a/t/t3415-rebase-autosquash.sh +++ b/t/t3415-rebase-autosquash.sh @@ -250,4 +250,58 @@ test_expect_success 'squash! fixup!' ' test_auto_fixup_fixup squash fixup ' +test_expect_success 'autosquash with custom inst format' ' + git reset --hard base && + git config --add rebase.instructionFormat "[%an @ %ar] %s" && + echo 2 >file1 && + git add -u && + test_tick && + git commit -m "squash! $(git rev-parse --short HEAD^)" && + echo 1 >file1 && + git add -u && + test_tick && + git commit -m "squash! $(git log -n 1 --format=%s HEAD~2)" && + git tag final-squash-instFmt && + test_tick && + git rebase --autosquash -i HEAD~4 && + git log --oneline >actual && + test_line_count = 3 actual && + git diff --exit-code final-squash-instFmt && + test 1 = "$(git cat-file blob HEAD^:file1)" && + test 2 = $(git cat-file commit HEAD^ | grep squash | wc -l) +' + +set_backup_editor () { + write_script backup-editor.sh <<-\EOF + cp "$1" .git/backup-"$(basename "$1")" + EOF + test_set_editor "$PWD/backup-editor.sh" +} + +test_expect_failure 'autosquash with multiple empty patches' ' + test_tick && + git commit --allow-empty -m "empty" && + test_tick && + git commit --allow-empty -m "empty2" && + test_tick && + >fixup && + git add fixup && + git commit --fixup HEAD^^ && + ( + set_backup_editor && + GIT_USE_REBASE_HELPER=false \ + git rebase -i --force-rebase --autosquash HEAD~4 && + grep empty2 .git/backup-git-rebase-todo + ) +' + +test_expect_success 'extra spaces after fixup!' ' + base=$(git rev-parse HEAD) && + test_commit to-fixup && + git commit --allow-empty -m "fixup! to-fixup" && + git rebase -i --autosquash --keep-empty HEAD~2 && + parent=$(git rev-parse HEAD^) && + test $base = $parent +' + test_done diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh index 2680375628..4428b9086e 100755 --- a/t/t3418-rebase-continue.sh +++ b/t/t3418-rebase-continue.sh @@ -40,6 +40,25 @@ test_expect_success 'non-interactive rebase --continue works with touched file' git rebase --continue ' +test_expect_success 'non-interactive rebase --continue with rerere enabled' ' + test_config rerere.enabled true && + test_when_finished "test_might_fail git rebase --abort" && + git reset --hard commit-new-file-F2-on-topic-branch && + git checkout master && + rm -fr .git/rebase-* && + + test_must_fail git rebase --onto master master topic && + echo "Resolved" >F2 && + git add F2 && + cp F2 F2.expected && + git rebase --continue && + + git reset --hard commit-new-file-F2-on-topic-branch && + git checkout master && + test_must_fail git rebase --onto master master topic && + test_cmp F2.expected F2 +' + test_expect_success 'rebase --continue can not be used with other options' ' test_must_fail git rebase -v --continue && test_must_fail git rebase --continue -v diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh index 217dd79b2e..49f548cdb9 100755 --- a/t/t3419-rebase-patch-id.sh +++ b/t/t3419-rebase-patch-id.sh @@ -73,17 +73,17 @@ do_tests () { run git format-patch --stdout --ignore-if-in-upstream master " - test_expect_success $pr 'detect upstream patch' " + test_expect_success $pr 'detect upstream patch' ' git checkout -q master && scramble file && git add file && - git commit -q -m 'change big file again' && + git commit -q -m "change big file again" && git checkout -q other^{} && git rebase master && - test_must_fail test -n \"\$(git rev-list master...HEAD~)\" - " + test_must_fail test -n "$(git rev-list master...HEAD~)" + ' - test_expect_success $pr 'do not drop patch' " + test_expect_success $pr 'do not drop patch' ' git branch -f squashed master && git checkout -q -f squashed && git reset -q --soft HEAD~2 && @@ -91,7 +91,7 @@ do_tests () { git checkout -q other^{} && test_must_fail git rebase squashed && rm -rf .git/rebase-apply - " + ' } do_tests 500 diff --git a/t/t3420-rebase-autostash.sh b/t/t3420-rebase-autostash.sh index d783f03d3f..ab8a63e8d6 100755 --- a/t/t3420-rebase-autostash.sh +++ b/t/t3420-rebase-autostash.sh @@ -37,6 +37,16 @@ testrebase() { type=$1 dotest=$2 + test_expect_success "rebase$type: dirty worktree, --no-autostash" ' + test_config rebase.autostash true && + git reset --hard && + git checkout -b rebased-feature-branch feature-branch && + test_when_finished git branch -D rebased-feature-branch && + test_when_finished git checkout feature-branch && + echo dirty >>file3 && + test_must_fail git rebase$type --no-autostash unrelated-onto-branch + ' + test_expect_success "rebase$type: dirty worktree, non-conflicting rebase" ' test_config rebase.autostash true && git reset --hard && @@ -169,7 +179,7 @@ testrebase " --interactive" .git/rebase-merge test_expect_success 'abort rebase -i with --autostash' ' test_when_finished "git reset --hard" && - echo uncommited-content >file0 && + echo uncommitted-content >file0 && ( write_script abort-editor.sh <<-\EOF && echo >"$1" @@ -178,7 +188,38 @@ test_expect_success 'abort rebase -i with --autostash' ' test_must_fail git rebase -i --autostash HEAD^ && rm -f abort-editor.sh ) && - echo uncommited-content >expected && + echo uncommitted-content >expected && + test_cmp expected file0 +' + +test_expect_success 'restore autostash on editor failure' ' + test_when_finished "git reset --hard" && + echo uncommitted-content >file0 && + ( + test_set_editor "false" && + test_must_fail git rebase -i --autostash HEAD^ + ) && + echo uncommitted-content >expected && + test_cmp expected file0 +' + +test_expect_success 'autostash is saved on editor failure with conflict' ' + test_when_finished "git reset --hard" && + echo uncommitted-content >file0 && + ( + write_script abort-editor.sh <<-\EOF && + echo conflicting-content >file0 + exit 1 + EOF + test_set_editor "$(pwd)/abort-editor.sh" && + test_must_fail git rebase -i --autostash HEAD^ && + rm -f abort-editor.sh + ) && + echo conflicting-content >expected && + test_cmp expected file0 && + git checkout file0 && + git stash pop && + echo uncommitted-content >expected && test_cmp expected file0 ' diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index 9c55cba198..68fe2003ef 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -253,7 +253,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_run_rebase success -p @@ -268,7 +268,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_run_rebase failure -p diff --git a/t/t3426-rebase-submodule.sh b/t/t3426-rebase-submodule.sh index d5b896d445..ebf4f5e4b2 100755 --- a/t/t3426-rebase-submodule.sh +++ b/t/t3426-rebase-submodule.sh @@ -38,9 +38,6 @@ git_rebase_interactive () { git rebase -i "$1" } -KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 -# The real reason "replace directory with submodule" fails is because a -# directory "sub1" exists, but we reuse the suppression added for merge here test_submodule_switch "git_rebase_interactive" test_done diff --git a/t/t3427-rebase-subtree.sh b/t/t3427-rebase-subtree.sh new file mode 100755 index 0000000000..3780877e4e --- /dev/null +++ b/t/t3427-rebase-subtree.sh @@ -0,0 +1,119 @@ +#!/bin/sh + +test_description='git rebase tests for -Xsubtree + +This test runs git rebase and tests the subtree strategy. +' +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + +commit_message() { + git log --pretty=format:%s -1 "$1" +} + +test_expect_success 'setup' ' + test_commit README && + mkdir files && + ( + cd files && + git init && + test_commit master1 && + test_commit master2 && + test_commit master3 + ) && + git fetch files master && + git branch files-master FETCH_HEAD && + git read-tree --prefix=files_subtree files-master && + git checkout -- files_subtree && + tree=$(git write-tree) && + head=$(git rev-parse HEAD) && + rev=$(git rev-parse --verify files-master^0) && + commit=$(git commit-tree -p $head -p $rev -m "Add subproject master" $tree) && + git update-ref HEAD $commit && + ( + cd files_subtree && + test_commit master4 + ) && + test_commit files_subtree/master5 +' + +# FAILURE: Does not preserve master4. +test_expect_failure 'Rebase -Xsubtree --preserve-merges --onto commit 4' ' + reset_rebase && + git checkout -b rebase-preserve-merges-4 master && + git filter-branch --prune-empty -f --subdirectory-filter files_subtree && + git commit -m "Empty commit" --allow-empty && + git rebase -Xsubtree=files_subtree --preserve-merges --onto files-master master && + verbose test "$(commit_message HEAD~)" = "files_subtree/master4" +' + +# FAILURE: Does not preserve master5. +test_expect_failure 'Rebase -Xsubtree --preserve-merges --onto commit 5' ' + reset_rebase && + git checkout -b rebase-preserve-merges-5 master && + git filter-branch --prune-empty -f --subdirectory-filter files_subtree && + git commit -m "Empty commit" --allow-empty && + git rebase -Xsubtree=files_subtree --preserve-merges --onto files-master master && + verbose test "$(commit_message HEAD)" = "files_subtree/master5" +' + +# FAILURE: Does not preserve master4. +test_expect_failure 'Rebase -Xsubtree --keep-empty --preserve-merges --onto commit 4' ' + reset_rebase && + git checkout -b rebase-keep-empty-4 master && + git filter-branch --prune-empty -f --subdirectory-filter files_subtree && + git commit -m "Empty commit" --allow-empty && + git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master && + verbose test "$(commit_message HEAD~2)" = "files_subtree/master4" +' + +# FAILURE: Does not preserve master5. +test_expect_failure 'Rebase -Xsubtree --keep-empty --preserve-merges --onto commit 5' ' + reset_rebase && + git checkout -b rebase-keep-empty-5 master && + git filter-branch --prune-empty -f --subdirectory-filter files_subtree && + git commit -m "Empty commit" --allow-empty && + git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master && + verbose test "$(commit_message HEAD~)" = "files_subtree/master5" +' + +# FAILURE: Does not preserve Empty. +test_expect_failure 'Rebase -Xsubtree --keep-empty --preserve-merges --onto empty commit' ' + reset_rebase && + git checkout -b rebase-keep-empty-empty master && + git filter-branch --prune-empty -f --subdirectory-filter files_subtree && + git commit -m "Empty commit" --allow-empty && + git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master && + verbose test "$(commit_message HEAD)" = "Empty commit" +' + +# FAILURE: fatal: Could not parse object +test_expect_failure 'Rebase -Xsubtree --onto commit 4' ' + reset_rebase && + git checkout -b rebase-onto-4 master && + git filter-branch --prune-empty -f --subdirectory-filter files_subtree && + git commit -m "Empty commit" --allow-empty && + git rebase -Xsubtree=files_subtree --onto files-master master && + verbose test "$(commit_message HEAD~2)" = "files_subtree/master4" +' + +# FAILURE: fatal: Could not parse object +test_expect_failure 'Rebase -Xsubtree --onto commit 5' ' + reset_rebase && + git checkout -b rebase-onto-5 master && + git filter-branch --prune-empty -f --subdirectory-filter files_subtree && + git commit -m "Empty commit" --allow-empty && + git rebase -Xsubtree=files_subtree --onto files-master master && + verbose test "$(commit_message HEAD~)" = "files_subtree/master5" +' +# FAILURE: fatal: Could not parse object +test_expect_failure 'Rebase -Xsubtree --onto empty commit' ' + reset_rebase && + git checkout -b rebase-onto-empty master && + git filter-branch --prune-empty -f --subdirectory-filter files_subtree && + git commit -m "Empty commit" --allow-empty && + git rebase -Xsubtree=files_subtree --onto files-master master && + verbose test "$(commit_message HEAD)" = "Empty commit" +' + +test_done diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index 51f3bbb8af..4f2a263b63 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -96,7 +96,7 @@ test_expect_success 'revert forbidden on dirty working tree' ' echo content >extra_file && git add extra_file && test_must_fail git revert HEAD 2>errors && - test_i18ngrep "Your local changes would be overwritten by " errors + test_i18ngrep "your local changes would be overwritten by " errors ' @@ -141,4 +141,16 @@ test_expect_success 'cherry-pick "-" works with arguments' ' test_cmp expect actual ' +test_expect_success 'cherry-pick works with dirty renamed file' ' + test_commit to-rename && + git checkout -b unrelated && + test_commit unrelated && + git checkout @{-1} && + git mv to-rename.t renamed && + test_tick && + git commit -m renamed && + echo modified >renamed && + git cherry-pick refs/heads/unrelated +' + test_done diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index 7b7a89dbd5..0acf4b1461 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -147,6 +147,16 @@ test_expect_success '--abort to cancel single cherry-pick' ' git diff-index --exit-code HEAD ' +test_expect_success '--abort does not unsafely change HEAD' ' + pristine_detach initial && + test_must_fail git cherry-pick picked anotherpick && + git reset --hard base && + test_must_fail git cherry-pick picked anotherpick && + git cherry-pick --abort 2>actual && + test_i18ngrep "You seem to have moved HEAD" actual && + test_cmp_rev base HEAD +' + test_expect_success 'cherry-pick --abort to cancel multiple revert' ' pristine_detach anotherpick && test_expect_code 1 git revert base..picked && @@ -375,7 +385,7 @@ test_expect_success '--continue respects opts' ' git cat-file commit HEAD~1 >picked_msg && git cat-file commit HEAD~2 >unrelatedpick_msg && git cat-file commit HEAD~3 >initial_msg && - test_must_fail grep "cherry picked from" initial_msg && + ! grep "cherry picked from" initial_msg && grep "cherry picked from" unrelatedpick_msg && grep "cherry picked from" picked_msg && grep "cherry picked from" anotherpick_msg @@ -416,9 +426,9 @@ test_expect_failure '--signoff is automatically propagated to resolved conflict' git cat-file commit HEAD~1 >picked_msg && git cat-file commit HEAD~2 >unrelatedpick_msg && git cat-file commit HEAD~3 >initial_msg && - test_must_fail grep "Signed-off-by:" initial_msg && + ! grep "Signed-off-by:" initial_msg && grep "Signed-off-by:" unrelatedpick_msg && - test_must_fail grep "Signed-off-by:" picked_msg && + ! grep "Signed-off-by:" picked_msg && grep "Signed-off-by:" anotherpick_msg ' diff --git a/t/t3511-cherry-pick-x.sh b/t/t3511-cherry-pick-x.sh index b7dff09d06..bf0a5c9887 100755 --- a/t/t3511-cherry-pick-x.sh +++ b/t/t3511-cherry-pick-x.sh @@ -25,9 +25,8 @@ Signed-off-by: B.U. Thor <buthor@example.com>" mesg_broken_footer="$mesg_no_footer -The signed-off-by string should begin with the words Signed-off-by followed -by a colon and space, and then the signers name and email address. e.g. -Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" +This is not recognized as a footer because Myfooter is not a recognized token. +Myfooter: A.U. Thor <author@example.com>" mesg_with_footer_sob="$mesg_with_footer Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" @@ -77,7 +76,7 @@ test_expect_success setup ' test_expect_success 'cherry-pick -x inserts blank line after one line subject' ' pristine_detach initial && - sha1=`git rev-parse mesg-one-line^0` && + sha1=$(git rev-parse mesg-one-line^0) && git cherry-pick -x mesg-one-line && cat <<-EOF >expect && $mesg_one_line @@ -112,9 +111,20 @@ test_expect_success 'cherry-pick -s inserts blank line after non-conforming foot test_cmp expect actual ' +test_expect_success 'cherry-pick -s recognizes trailer config' ' + pristine_detach initial && + git -c "trailer.Myfooter.ifexists=add" cherry-pick -s mesg-broken-footer && + cat <<-EOF >expect && + $mesg_broken_footer + Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> + EOF + git log -1 --pretty=format:%B >actual && + test_cmp expect actual +' + test_expect_success 'cherry-pick -x inserts blank line when conforming footer not found' ' pristine_detach initial && - sha1=`git rev-parse mesg-no-footer^0` && + sha1=$(git rev-parse mesg-no-footer^0) && git cherry-pick -x mesg-no-footer && cat <<-EOF >expect && $mesg_no_footer @@ -139,7 +149,7 @@ test_expect_success 'cherry-pick -s inserts blank line when conforming footer no test_expect_success 'cherry-pick -x -s inserts blank line when conforming footer not found' ' pristine_detach initial && - sha1=`git rev-parse mesg-no-footer^0` && + sha1=$(git rev-parse mesg-no-footer^0) && git cherry-pick -x -s mesg-no-footer && cat <<-EOF >expect && $mesg_no_footer @@ -164,7 +174,7 @@ test_expect_success 'cherry-pick -s adds sob when last sob doesnt match committe test_expect_success 'cherry-pick -x -s adds sob when last sob doesnt match committer' ' pristine_detach initial && - sha1=`git rev-parse mesg-with-footer^0` && + sha1=$(git rev-parse mesg-with-footer^0) && git cherry-pick -x -s mesg-with-footer && cat <<-EOF >expect && $mesg_with_footer @@ -187,7 +197,7 @@ test_expect_success 'cherry-pick -s refrains from adding duplicate trailing sob' test_expect_success 'cherry-pick -x -s adds sob even when trailing sob exists for committer' ' pristine_detach initial && - sha1=`git rev-parse mesg-with-footer-sob^0` && + sha1=$(git rev-parse mesg-with-footer-sob^0) && git cherry-pick -x -s mesg-with-footer-sob && cat <<-EOF >expect && $mesg_with_footer_sob @@ -200,7 +210,7 @@ test_expect_success 'cherry-pick -x -s adds sob even when trailing sob exists fo test_expect_success 'cherry-pick -x treats "(cherry picked from..." line as part of footer' ' pristine_detach initial && - sha1=`git rev-parse mesg-with-cherry-footer^0` && + sha1=$(git rev-parse mesg-with-cherry-footer^0) && git cherry-pick -x mesg-with-cherry-footer && cat <<-EOF >expect && $mesg_with_cherry_footer @@ -223,7 +233,7 @@ test_expect_success 'cherry-pick -s treats "(cherry picked from..." line as part test_expect_success 'cherry-pick -x -s treats "(cherry picked from..." line as part of footer' ' pristine_detach initial && - sha1=`git rev-parse mesg-with-cherry-footer^0` && + sha1=$(git rev-parse mesg-with-cherry-footer^0) && git cherry-pick -x -s mesg-with-cherry-footer && cat <<-EOF >expect && $mesg_with_cherry_footer diff --git a/t/t3513-revert-submodule.sh b/t/t3513-revert-submodule.sh index a1c4e0216f..db9378142a 100755 --- a/t/t3513-revert-submodule.sh +++ b/t/t3513-revert-submodule.sh @@ -14,11 +14,11 @@ test_description='revert can handle submodules' git_revert () { git status -su >expect && ls -1pR * >>expect && - tar czf "$TRASH_DIRECTORY/tmp.tgz" * && + tar cf "$TRASH_DIRECTORY/tmp.tar" * && git checkout "$1" && git revert HEAD && rm -rf * && - tar xzf "$TRASH_DIRECTORY/tmp.tgz" && + tar xf "$TRASH_DIRECTORY/tmp.tar" && git status -su >actual && ls -1pR * >>actual && test_cmp expect actual && diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index 9d90d2c935..5aa6db584c 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -14,7 +14,7 @@ test_expect_success \ git add -- foo bar baz 'space embedded' -q && git commit -m 'add normal files'" -if touch -- 'tab embedded' 'newline +if test_have_prereq !MINGW && touch -- 'tab embedded' 'newline embedded' 2>/dev/null then test_set_prereq FUNNYNAMES @@ -111,21 +111,21 @@ test_expect_success 'Remove nonexistent file with --ignore-unmatch' ' ' test_expect_success '"rm" command printed' ' - echo frotz > test-file && + echo frotz >test-file && git add test-file && git commit -m "add file for rm test" && - git rm test-file > rm-output && - test `grep "^rm " rm-output | wc -l` = 1 && + git rm test-file >rm-output && + test $(grep "^rm " rm-output | wc -l) = 1 && rm -f test-file rm-output && git commit -m "remove file from rm test" ' test_expect_success '"rm" command suppressed with --quiet' ' - echo frotz > test-file && + echo frotz >test-file && git add test-file && git commit -m "add file for rm --quiet test" && - git rm --quiet test-file > rm-output && - test `wc -l < rm-output` = 0 && + git rm --quiet test-file >rm-output && + test_must_be_empty rm-output && rm -f test-file rm-output && git commit -m "remove file from rm --quiet test" ' @@ -221,7 +221,7 @@ test_expect_success 'Call "rm" from outside the work tree' ' mkdir repo && (cd repo && git init && - echo something > somefile && + echo something >somefile && git add somefile && git commit -m "add a file" && (cd .. && @@ -287,7 +287,7 @@ test_expect_success 'rm removes empty submodules from work tree' ' git commit -m "add submodule" && git rm submod && test ! -e submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -298,7 +298,7 @@ test_expect_success 'rm removes removed submodule from index and .gitmodules' ' git submodule update && rm -rf submod && git rm submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -309,7 +309,7 @@ test_expect_success 'rm removes work tree of unmodified submodules' ' git submodule update && git rm submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -320,7 +320,7 @@ test_expect_success 'rm removes a submodule with a trailing /' ' git submodule update && git rm submod/ && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -335,17 +335,15 @@ test_expect_success 'rm succeeds when given a directory with a trailing /' ' test_expect_success 'rm of a populated submodule with different HEAD fails unless forced' ' git reset --hard && git submodule update && - (cd submod && - git checkout HEAD^ - ) && + git -C submod checkout HEAD^ && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -418,34 +416,30 @@ test_expect_success 'rm issues a warning when section is not found in .gitmodule test_expect_success 'rm of a populated submodule with modifications fails unless forced' ' git reset --hard && git submodule update && - (cd submod && - echo X >empty - ) && + echo X >submod/empty && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' test_expect_success 'rm of a populated submodule with untracked files fails unless forced' ' git reset --hard && git submodule update && - (cd submod && - echo X >untracked - ) && + echo X >submod/untracked && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -461,16 +455,12 @@ test_expect_success 'setup submodule conflict' ' git add nitfol && git commit -m "added nitfol 2" && git checkout -b conflict1 master && - (cd submod && - git fetch && - git checkout branch1 - ) && + git -C submod fetch && + git -C submod checkout branch1 && git add submod && git commit -m "submod 1" && git checkout -b conflict2 master && - (cd submod && - git checkout branch2 - ) && + git -C submod checkout branch2 && git add submod && git commit -m "submod 2" ' @@ -486,7 +476,7 @@ test_expect_success 'rm removes work tree of unmodified conflicted submodule' ' test_must_fail git merge conflict2 && git rm submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -494,18 +484,16 @@ test_expect_success 'rm of a conflicted populated submodule with different HEAD git checkout conflict1 && git reset --hard && git submodule update && - (cd submod && - git checkout HEAD^ - ) && + git -C submod checkout HEAD^ && test_must_fail git merge conflict2 && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -515,18 +503,16 @@ test_expect_success 'rm of a conflicted populated submodule with modifications f git checkout conflict1 && git reset --hard && git submodule update && - (cd submod && - echo X >empty - ) && + echo X >submod/empty && test_must_fail git merge conflict2 && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -536,18 +522,16 @@ test_expect_success 'rm of a conflicted populated submodule with untracked files git checkout conflict1 && git reset --hard && git submodule update && - (cd submod && - echo X >untracked - ) && + echo X >submod/untracked && test_must_fail git merge conflict2 && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -564,12 +548,12 @@ test_expect_success 'rm of a conflicted populated submodule with a .git director test_must_fail git rm submod && test -d submod && test -d submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && test_must_fail git rm -f submod && test -d submod && test -d submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git merge --abort && rm -rf submod @@ -581,30 +565,26 @@ test_expect_success 'rm of a conflicted unpopulated submodule succeeds' ' test_must_fail git merge conflict2 && git rm submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' -test_expect_success 'rm of a populated submodule with a .git directory fails even when forced' ' +test_expect_success 'rm of a populated submodule with a .git directory migrates git dir' ' git checkout -f master && git reset --hard && git submodule update && (cd submod && rm .git && cp -R ../.git/modules/sub .git && - GIT_WORK_TREE=. git config --unset core.worktree + GIT_WORK_TREE=. git config --unset core.worktree && + rm -r ../.git/modules/sub ) && - test_must_fail git rm submod && - test -d submod && - test -d submod/.git && - git status -s -uno --ignore-submodules=none > actual && - ! test -s actual && - test_must_fail git rm -f submod && - test -d submod && - test -d submod/.git && - git status -s -uno --ignore-submodules=none > actual && - ! test -s actual && - rm -rf submod + git rm submod 2>output.err && + ! test -d submod && + ! test -d submod/.git && + git status -s -uno --ignore-submodules=none >actual && + test -s actual && + test_i18ngrep Migrating output.err ' cat >expect.deepmodified <<EOF @@ -629,58 +609,52 @@ test_expect_success 'setup subsubmodule' ' test_expect_success 'rm recursively removes work tree of unmodified submodules' ' git rm submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' test_expect_success 'rm of a populated nested submodule with different nested HEAD fails unless forced' ' git reset --hard && git submodule update --recursive && - (cd submod/subsubmod && - git checkout HEAD^ - ) && + git -C submod/subsubmod checkout HEAD^ && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' test_expect_success 'rm of a populated nested submodule with nested modifications fails unless forced' ' git reset --hard && git submodule update --recursive && - (cd submod/subsubmod && - echo X >empty - ) && + echo X >submod/subsubmod/empty && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' test_expect_success 'rm of a populated nested submodule with nested untracked files fails unless forced' ' git reset --hard && git submodule update --recursive && - (cd submod/subsubmod && - echo X >untracked - ) && + echo X >submod/subsubmod/untracked && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -689,34 +663,29 @@ test_expect_success 'rm of a populated nested submodule with a nested .git direc git submodule update --recursive && (cd submod/subsubmod && rm .git && - cp -R ../../.git/modules/sub/modules/sub .git && + mv ../../.git/modules/sub/modules/sub .git && GIT_WORK_TREE=. git config --unset core.worktree ) && - test_must_fail git rm submod && - test -d submod && - test -d submod/subsubmod/.git && - git status -s -uno --ignore-submodules=none > actual && - ! test -s actual && - test_must_fail git rm -f submod && - test -d submod && - test -d submod/subsubmod/.git && - git status -s -uno --ignore-submodules=none > actual && - ! test -s actual && - rm -rf submod + git rm submod 2>output.err && + ! test -d submod && + ! test -d submod/subsubmod/.git && + git status -s -uno --ignore-submodules=none >actual && + test -s actual && + test_i18ngrep Migrating output.err ' test_expect_success 'checking out a commit after submodule removal needs manual updates' ' - git commit -m "submodule removal" submod && + git commit -m "submodule removal" submod .gitmodules && git checkout HEAD^ && git submodule update && - git checkout -q HEAD^ 2>actual && + git checkout -q HEAD^ && git checkout -q master 2>actual && test_i18ngrep "^warning: unable to rmdir submod:" actual && git status -s submod >actual && echo "?? submod/" >expected && test_cmp expected actual && rm -rf submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && ! test -s actual ' @@ -881,4 +850,9 @@ test_expect_success 'rm files with two different errors' ' test_i18ncmp expect actual ' +test_expect_success 'rm empty string should invoke warning' ' + git rm -rf "" 2>output && + test_i18ngrep "warning: empty strings" output +' + test_done diff --git a/t/t3700-add.sh b/t/t3700-add.sh index f7ff1f555d..f3a4b4a913 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -7,6 +7,20 @@ test_description='Test of git add, including the -- option.' . ./test-lib.sh +# Test the file mode "$1" of the file "$2" in the index. +test_mode_in_index () { + case "$(git ls-files -s "$2")" in + "$1 "*" $2") + echo pass + ;; + *) + echo fail + git ls-files -s "$2" + return 1 + ;; + esac +} + test_expect_success \ 'Test of git add' \ 'touch foo && git add foo' @@ -25,18 +39,12 @@ test_expect_success \ echo foo >xfoo1 && chmod 755 xfoo1 && git add xfoo1 && - case "`git ls-files --stage xfoo1`" in - 100644" "*xfoo1) echo pass;; - *) echo fail; git ls-files --stage xfoo1; (exit 1);; - esac' + test_mode_in_index 100644 xfoo1' test_expect_success 'git add: filemode=0 should not get confused by symlink' ' rm -f xfoo1 && test_ln_s_add foo xfoo1 && - case "`git ls-files --stage xfoo1`" in - 120000" "*xfoo1) echo pass;; - *) echo fail; git ls-files --stage xfoo1; (exit 1);; - esac + test_mode_in_index 120000 xfoo1 ' test_expect_success \ @@ -45,28 +53,19 @@ test_expect_success \ echo foo >xfoo2 && chmod 755 xfoo2 && git update-index --add xfoo2 && - case "`git ls-files --stage xfoo2`" in - 100644" "*xfoo2) echo pass;; - *) echo fail; git ls-files --stage xfoo2; (exit 1);; - esac' + test_mode_in_index 100644 xfoo2' test_expect_success 'git add: filemode=0 should not get confused by symlink' ' rm -f xfoo2 && test_ln_s_add foo xfoo2 && - case "`git ls-files --stage xfoo2`" in - 120000" "*xfoo2) echo pass;; - *) echo fail; git ls-files --stage xfoo2; (exit 1);; - esac + test_mode_in_index 120000 xfoo2 ' test_expect_success \ 'git update-index --add: Test that executable bit is not used...' \ 'git config core.filemode 0 && test_ln_s_add xfoo2 xfoo3 && # runs git update-index --add - case "`git ls-files --stage xfoo3`" in - 120000" "*xfoo3) echo pass;; - *) echo fail; git ls-files --stage xfoo3; (exit 1);; - esac' + test_mode_in_index 120000 xfoo3' test_expect_success '.gitignore test setup' ' echo "*.ig" >.gitignore && @@ -173,14 +172,14 @@ test_expect_success 'git add with filemode=0, symlinks=0 prefers stage 2 over st test_expect_success 'git add --refresh' ' >foo && git add foo && git commit -a -m "commit all" && - test -z "`git diff-index HEAD -- foo`" && + test -z "$(git diff-index HEAD -- foo)" && git read-tree HEAD && - case "`git diff-index HEAD -- foo`" in + case "$(git diff-index HEAD -- foo)" in :100644" "*"M foo") echo pass;; *) echo fail; (exit 1);; esac && git add --refresh -- foo && - test -z "`git diff-index HEAD -- foo`" + test -z "$(git diff-index HEAD -- foo)" ' test_expect_success 'git add --refresh with pathspec' ' @@ -332,4 +331,76 @@ test_expect_success 'git add --dry-run --ignore-missing of non-existing file out test_i18ncmp expect.err actual.err ' +test_expect_success 'git add empty string should invoke warning' ' + git add "" 2>output && + test_i18ngrep "warning: empty strings" output +' + +test_expect_success 'git add --chmod=[+-]x stages correctly' ' + rm -f foo1 && + echo foo >foo1 && + git add --chmod=+x foo1 && + test_mode_in_index 100755 foo1 && + git add --chmod=-x foo1 && + test_mode_in_index 100644 foo1 +' + +test_expect_success POSIXPERM,SYMLINKS 'git add --chmod=+x with symlinks' ' + git config core.filemode 1 && + git config core.symlinks 1 && + rm -f foo2 && + echo foo >foo2 && + git add --chmod=+x foo2 && + test_mode_in_index 100755 foo2 +' + +test_expect_success 'git add --chmod=[+-]x changes index with already added file' ' + rm -f foo3 xfoo3 && + echo foo >foo3 && + git add foo3 && + git add --chmod=+x foo3 && + test_mode_in_index 100755 foo3 && + echo foo >xfoo3 && + chmod 755 xfoo3 && + git add xfoo3 && + git add --chmod=-x xfoo3 && + test_mode_in_index 100644 xfoo3 +' + +test_expect_success POSIXPERM 'git add --chmod=[+-]x does not change the working tree' ' + echo foo >foo4 && + git add foo4 && + git add --chmod=+x foo4 && + ! test -x foo4 +' + +test_expect_success 'no file status change if no pathspec is given' ' + >foo5 && + >foo6 && + git add foo5 foo6 && + git add --chmod=+x && + test_mode_in_index 100644 foo5 && + test_mode_in_index 100644 foo6 +' + +test_expect_success 'no file status change if no pathspec is given in subdir' ' + mkdir -p sub && + ( + cd sub && + >sub-foo1 && + >sub-foo2 && + git add . && + git add --chmod=+x && + test_mode_in_index 100644 sub-foo1 && + test_mode_in_index 100644 sub-foo2 + ) +' + +test_expect_success 'all statuses changed in folder if . is given' ' + git add --chmod=+x . && + test $(git ls-files --stage | grep ^100644 | wc -l) -eq 0 && + git add --chmod=-x . && + test $(git ls-files --stage | grep ^100755 | wc -l) -eq 0 +' + test_done diff --git a/t/t3703-add-magic-pathspec.sh b/t/t3703-add-magic-pathspec.sh index 5115de7036..3ef525a559 100755 --- a/t/t3703-add-magic-pathspec.sh +++ b/t/t3703-add-magic-pathspec.sh @@ -38,7 +38,7 @@ cat >expected <<EOF add 'sub/foo' EOF -if mkdir ":" 2>/dev/null +if test_have_prereq !MINGW && mkdir ":" 2>/dev/null then test_set_prereq COLON_DIR fi diff --git a/t/t3900-i18n-commit.sh b/t/t3900-i18n-commit.sh index 4bf1dbe9c9..3b94283e35 100755 --- a/t/t3900-i18n-commit.sh +++ b/t/t3900-i18n-commit.sh @@ -45,7 +45,7 @@ test_expect_success 'UTF-8 invalid characters refused' ' printf "Commit message\n\nInvalid surrogate:\355\240\200\n" \ >"$HOME/invalid" && git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr && - grep "did not conform" "$HOME"/stderr + test_i18ngrep "did not conform" "$HOME"/stderr ' test_expect_success 'UTF-8 overlong sequences rejected' ' @@ -55,7 +55,7 @@ test_expect_success 'UTF-8 overlong sequences rejected' ' printf "\340\202\251ommit message\n\nThis is not a space:\300\240\n" \ >"$HOME/invalid" && git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr && - grep "did not conform" "$HOME"/stderr + test_i18ngrep "did not conform" "$HOME"/stderr ' test_expect_success 'UTF-8 non-characters refused' ' @@ -64,7 +64,7 @@ test_expect_success 'UTF-8 non-characters refused' ' printf "Commit message\n\nNon-character:\364\217\277\276\n" \ >"$HOME/invalid" && git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr && - grep "did not conform" "$HOME"/stderr + test_i18ngrep "did not conform" "$HOME"/stderr ' test_expect_success 'UTF-8 non-characters refused' ' @@ -73,7 +73,7 @@ test_expect_success 'UTF-8 non-characters refused' ' printf "Commit message\n\nNon-character:\357\267\220\n" \ >"$HOME/invalid" && git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr && - grep "did not conform" "$HOME"/stderr + test_i18ngrep "did not conform" "$HOME"/stderr ' for H in ISO8859-1 eucJP ISO-2022-JP diff --git a/t/t3901-i18n-patch.sh b/t/t3901-i18n-patch.sh index 75cf3ff9bd..f663d567c8 100755 --- a/t/t3901-i18n-patch.sh +++ b/t/t3901-i18n-patch.sh @@ -251,4 +251,66 @@ test_expect_success 'rebase --merge (L/U)' ' check_encoding 2 8859 ' +test_expect_success 'am (U/U)' ' + # Apply UTF-8 patches with UTF-8 commitencoding + git config i18n.commitencoding UTF-8 && + . "$TEST_DIRECTORY"/t3901-utf8.txt && + + git reset --hard master && + git am out-u1 out-u2 && + + check_encoding 2 +' + +test_expect_success !MINGW 'am (L/L)' ' + # Apply ISO-8859-1 patches with ISO-8859-1 commitencoding + git config i18n.commitencoding ISO8859-1 && + . "$TEST_DIRECTORY"/t3901-8859-1.txt && + + git reset --hard master && + git am out-l1 out-l2 && + + check_encoding 2 8859 +' + +test_expect_success 'am (U/L)' ' + # Apply ISO-8859-1 patches with UTF-8 commitencoding + git config i18n.commitencoding UTF-8 && + . "$TEST_DIRECTORY"/t3901-utf8.txt && + git reset --hard master && + + # am specifies --utf8 by default. + git am out-l1 out-l2 && + + check_encoding 2 +' + +test_expect_success 'am --no-utf8 (U/L)' ' + # Apply ISO-8859-1 patches with UTF-8 commitencoding + git config i18n.commitencoding UTF-8 && + . "$TEST_DIRECTORY"/t3901-utf8.txt && + + git reset --hard master && + git am --no-utf8 out-l1 out-l2 2>err && + + # commit-tree will warn that the commit message does not contain valid UTF-8 + # as mailinfo did not convert it + test_i18ngrep "did not conform" err && + + check_encoding 2 +' + +test_expect_success !MINGW 'am (L/U)' ' + # Apply UTF-8 patches with ISO-8859-1 commitencoding + git config i18n.commitencoding ISO8859-1 && + . "$TEST_DIRECTORY"/t3901-8859-1.txt && + + git reset --hard master && + # mailinfo will re-code the commit message to the charset specified by + # i18n.commitencoding + git am out-u1 out-u2 && + + check_encoding 2 8859 +' + test_done diff --git a/t/t3902-quoted.sh b/t/t3902-quoted.sh index 892f567844..f528008c36 100755 --- a/t/t3902-quoted.sh +++ b/t/t3902-quoted.sh @@ -12,6 +12,7 @@ GN='ç´”' HT=' ' DQ='"' +test_have_prereq MINGW || echo foo 2>/dev/null > "Name and an${HT}HT" if ! test -f "Name and an${HT}HT" then diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 7396ca9911..2de3e18ce6 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -45,13 +45,6 @@ test_expect_success 'applying bogus stash does nothing' ' test_cmp expect file ' -test_expect_success 'apply requires a clean index' ' - test_when_finished "git reset --hard" && - echo changed >other-file && - git add other-file && - test_must_fail git stash apply -' - test_expect_success 'apply does not need clean working directory' ' echo 4 >other-file && git stash apply && @@ -138,6 +131,26 @@ test_expect_success 'drop middle stash' ' test 1 = $(git show HEAD:file) ' +test_expect_success 'drop middle stash by index' ' + git reset --hard && + echo 8 >file && + git stash && + echo 9 >file && + git stash && + git stash drop 1 && + test 2 = $(git stash list | wc -l) && + git stash apply && + test 9 = $(cat file) && + test 1 = $(git show :file) && + test 1 = $(git show HEAD:file) && + git reset --hard && + git stash drop && + git stash apply && + test 3 = $(cat file) && + test 1 = $(git show :file) && + test 1 = $(git show HEAD:file) +' + test_expect_success 'stash pop' ' git reset --hard && git stash pop && @@ -611,6 +624,21 @@ test_expect_success 'invalid ref of the form stash@{n}, n >= N' ' git stash drop ' +test_expect_success 'invalid ref of the form "n", n >= N' ' + git stash clear && + test_must_fail git stash drop 0 && + echo bar5 >file && + echo bar6 >file2 && + git add file2 && + git stash && + test_must_fail git stash drop 1 && + test_must_fail git stash pop 1 && + test_must_fail git stash apply 1 && + test_must_fail git stash show 1 && + test_must_fail git stash branch tmp 1 && + git stash drop +' + test_expect_success 'stash branch should not drop the stash if the branch exists' ' git stash clear && echo foo >file && @@ -679,7 +707,7 @@ test_expect_success 'store updates stash ref and reflog' ' ! grep quux bazzy && git stash store -m quuxery $STASH_ID && test $(cat .git/refs/stash) = $STASH_ID && - grep $STASH_ID .git/logs/refs/stash && + git reflog --format=%H stash| grep $STASH_ID && git stash pop && grep quux bazzy ' @@ -738,4 +766,13 @@ test_expect_success 'stash list --cc shows combined diff' ' test_cmp expect actual ' +test_expect_success 'stash is not confused by partial renames' ' + mv file renamed && + git add renamed && + git stash && + git stash apply && + test_path_is_file renamed && + test_path_is_missing file +' + test_done diff --git a/t/t3910-mac-os-precompose.sh b/t/t3910-mac-os-precompose.sh index 831935665e..26dd5b7f78 100755 --- a/t/t3910-mac-os-precompose.sh +++ b/t/t3910-mac-os-precompose.sh @@ -49,12 +49,54 @@ test_expect_success "setup" ' test_expect_success "setup case mac" ' git checkout -b mac_os ' +# This will test nfd2nfc in git diff +test_expect_success "git diff f.Adiar" ' + touch f.$Adiarnfc && + git add f.$Adiarnfc && + echo f.Adiarnfc >f.$Adiarnfc && + git diff f.$Adiarnfd >expect && + git diff f.$Adiarnfc >actual && + test_cmp expect actual && + git reset HEAD f.Adiarnfc && + rm f.$Adiarnfc expect actual +' +# This will test nfd2nfc in git diff-files +test_expect_success "git diff-files f.Adiar" ' + touch f.$Adiarnfc && + git add f.$Adiarnfc && + echo f.Adiarnfc >f.$Adiarnfc && + git diff-files f.$Adiarnfd >expect && + git diff-files f.$Adiarnfc >actual && + test_cmp expect actual && + git reset HEAD f.Adiarnfc && + rm f.$Adiarnfc expect actual +' +# This will test nfd2nfc in git diff-index +test_expect_success "git diff-index f.Adiar" ' + touch f.$Adiarnfc && + git add f.$Adiarnfc && + echo f.Adiarnfc >f.$Adiarnfc && + git diff-index HEAD f.$Adiarnfd >expect && + git diff-index HEAD f.$Adiarnfc >actual && + test_cmp expect actual && + git reset HEAD f.Adiarnfc && + rm f.$Adiarnfc expect actual +' # This will test nfd2nfc in readdir() test_expect_success "add file Adiarnfc" ' echo f.Adiarnfc >f.$Adiarnfc && git add f.$Adiarnfc && git commit -m "add f.$Adiarnfc" ' +# This will test nfd2nfc in git diff-tree +test_expect_success "git diff-tree f.Adiar" ' + echo f.Adiarnfc >>f.$Adiarnfc && + git diff-tree HEAD f.$Adiarnfd >expect && + git diff-tree HEAD f.$Adiarnfc >actual && + test_cmp expect actual && + git checkout f.$Adiarnfc && + rm expect actual +' # This will test nfd2nfc in git stage() test_expect_success "stage file d.Adiarnfd/f.Adiarnfd" ' mkdir d.$Adiarnfd && diff --git a/t/t4001-diff-rename.sh b/t/t4001-diff-rename.sh index 2f327b7495..0d1fa45d25 100755 --- a/t/t4001-diff-rename.sh +++ b/t/t4001-diff-rename.sh @@ -9,21 +9,84 @@ test_description='Test rename detection in diff engine. . ./test-lib.sh . "$TEST_DIRECTORY"/diff-lib.sh -echo >path0 'Line 1 -Line 2 -Line 3 -Line 4 -Line 5 -Line 6 -Line 7 -Line 8 -Line 9 -Line 10 -line 11 -Line 12 -Line 13 -Line 14 -Line 15 +test_expect_success 'setup' ' + cat >path0 <<-\EOF && + Line 1 + Line 2 + Line 3 + Line 4 + Line 5 + Line 6 + Line 7 + Line 8 + Line 9 + Line 10 + line 11 + Line 12 + Line 13 + Line 14 + Line 15 + EOF + cat >expected <<-\EOF && + diff --git a/path0 b/path1 + rename from path0 + rename to path1 + --- a/path0 + +++ b/path1 + @@ -8,7 +8,7 @@ Line 7 + Line 8 + Line 9 + Line 10 + -line 11 + +Line 11 + Line 12 + Line 13 + Line 14 + EOF + cat >no-rename <<-\EOF + diff --git a/path0 b/path0 + deleted file mode 100644 + index fdbec44..0000000 + --- a/path0 + +++ /dev/null + @@ -1,15 +0,0 @@ + -Line 1 + -Line 2 + -Line 3 + -Line 4 + -Line 5 + -Line 6 + -Line 7 + -Line 8 + -Line 9 + -Line 10 + -line 11 + -Line 12 + -Line 13 + -Line 14 + -Line 15 + diff --git a/path1 b/path1 + new file mode 100644 + index 0000000..752c50e + --- /dev/null + +++ b/path1 + @@ -0,0 +1,15 @@ + +Line 1 + +Line 2 + +Line 3 + +Line 4 + +Line 5 + +Line 6 + +Line 7 + +Line 8 + +Line 9 + +Line 10 + +Line 11 + +Line 12 + +Line 13 + +Line 14 + +Line 15 + EOF ' test_expect_success \ @@ -43,27 +106,27 @@ test_expect_success \ test_expect_success \ 'git diff-index -p -M after rename and editing.' \ 'git diff-index -p -M $tree >current' -cat >expected <<\EOF -diff --git a/path0 b/path1 -rename from path0 -rename to path1 ---- a/path0 -+++ b/path1 -@@ -8,7 +8,7 @@ Line 7 - Line 8 - Line 9 - Line 10 --line 11 -+Line 11 - Line 12 - Line 13 - Line 14 -EOF + test_expect_success \ 'validate the output.' \ 'compare_diff_patch current expected' +test_expect_success 'test diff.renames=true' ' + git -c diff.renames=true diff --cached $tree >current && + compare_diff_patch current expected +' + +test_expect_success 'test diff.renames=false' ' + git -c diff.renames=false diff --cached $tree >current && + compare_diff_patch current no-rename +' + +test_expect_success 'test diff.renames unset' ' + git diff --cached $tree >current && + compare_diff_patch current expected +' + test_expect_success 'favour same basenames over different ones' ' cp path1 another-path && git add another-path && @@ -77,6 +140,17 @@ test_expect_success 'favour same basenames even with minor differences' ' git show HEAD:path1 | sed "s/15/16/" > subdir/path1 && git status | test_i18ngrep "renamed: .*path1 -> subdir/path1"' +test_expect_success 'two files with same basename and same content' ' + git reset --hard && + mkdir -p dir/A dir/B && + cp path1 dir/A/file && + cp path1 dir/B/file && + git add dir && + git commit -m 2 && + git mv dir other-dir && + git status | test_i18ngrep "renamed: .*dir/A/file -> other-dir/A/file" +' + test_expect_success 'setup for many rename source candidates' ' git reset --hard && for i in 0 1 2 3 4 5 6 7 8 9; diff --git a/t/t4010-diff-pathspec.sh b/t/t4010-diff-pathspec.sh index 43c488b545..35b35a81c8 100755 --- a/t/t4010-diff-pathspec.sh +++ b/t/t4010-diff-pathspec.sh @@ -78,8 +78,6 @@ test_expect_success 'diff-tree pathspec' ' test_cmp expected current ' -EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904 - test_expect_success 'diff-tree with wildcard shows dir also matches' ' git diff-tree --name-only $EMPTY_TREE $tree -- "f*" >result && echo file0 >expected && diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index 7452fce0da..13e7f621ab 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -139,13 +139,11 @@ test_expect_success SYMLINKS 'setup symlinks with attributes' ' test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' ' cat >expect <<-\EOF && diff --git a/file.bin b/file.bin - new file mode 100644 - index 0000000..d95f3ad - Binary files /dev/null and b/file.bin differ + index e69de29..d95f3ad 100644 + Binary files a/file.bin and b/file.bin differ diff --git a/link.bin b/link.bin - new file mode 120000 - index 0000000..dce41ec - --- /dev/null + index e69de29..dce41ec 120000 + --- a/link.bin +++ b/link.bin @@ -0,0 +1 @@ +file.bin diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh index 643d729157..0a8af76aab 100755 --- a/t/t4012-diff-binary.sh +++ b/t/t4012-diff-binary.sh @@ -68,7 +68,7 @@ test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' sed -e "s/-CIT/xCIT/" <output >broken && test_must_fail git apply --stat --summary broken 2>detected && detected=$(cat detected) && - detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(expr "$detected" : "error.*at line \\([0-9]*\\)\$") && detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' @@ -77,7 +77,7 @@ test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' git diff --binary | sed -e "s/-CIT/xCIT/" >broken && test_must_fail git apply --stat --summary broken 2>detected && detected=$(cat detected) && - detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(expr "$detected" : "error.*at line \\([0-9]*\\)\$") && detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 6ec6072118..d09acfe48e 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -90,6 +90,8 @@ test_expect_success setup ' git commit -m "Rearranged lines in dir/sub" && git checkout master && + git config diff.renames false && + git show-branch ' @@ -304,9 +306,18 @@ diff --no-index --name-status dir2 dir diff --no-index --name-status -- dir2 dir diff --no-index dir dir3 diff master master^ side +# Can't use spaces... +diff --line-prefix=abc master master^ side diff --dirstat master~1 master~2 diff --dirstat initial rearrange diff --dirstat-by-file initial rearrange +# No-index --abbrev and --no-abbrev +diff --raw initial +diff --raw --abbrev=4 initial +diff --raw --no-abbrev initial +diff --no-index --raw dir2 dir +diff --no-index --raw --abbrev=4 dir2 dir +diff --no-index --raw --no-abbrev dir2 dir EOF test_expect_success 'log -S requires an argument' ' @@ -323,6 +334,10 @@ test_expect_success 'diff --cached -- file on unborn branch' ' git diff --cached -- file0 >result && test_cmp "$TEST_DIRECTORY/t4013/diff.diff_--cached_--_file0" result ' +test_expect_success 'diff --line-prefix with spaces' ' + git diff --line-prefix="| | | " --cached -- file0 >result && + test_cmp "$TEST_DIRECTORY/t4013/diff.diff_--line-prefix_--cached_--_file0" result +' test_expect_success 'diff-tree --stdin with log formatting' ' cat >expect <<-\EOF && diff --git a/t/t4013/diff.diff_--line-prefix=abc_master_master^_side b/t/t4013/diff.diff_--line-prefix=abc_master_master^_side new file mode 100644 index 0000000000..99f91e7f0e --- /dev/null +++ b/t/t4013/diff.diff_--line-prefix=abc_master_master^_side @@ -0,0 +1,29 @@ +$ git diff --line-prefix=abc master master^ side +abcdiff --cc dir/sub +abcindex cead32e,7289e35..992913c +abc--- a/dir/sub +abc+++ b/dir/sub +abc@@@ -1,6 -1,4 +1,8 @@@ +abc A +abc B +abc +C +abc +D +abc +E +abc +F +abc+ 1 +abc+ 2 +abcdiff --cc file0 +abcindex b414108,f4615da..10a8a9f +abc--- a/file0 +abc+++ b/file0 +abc@@@ -1,6 -1,6 +1,9 @@@ +abc 1 +abc 2 +abc 3 +abc +4 +abc +5 +abc +6 +abc+ A +abc+ B +abc+ C +$ diff --git a/t/t4013/diff.diff_--line-prefix_--cached_--_file0 b/t/t4013/diff.diff_--line-prefix_--cached_--_file0 new file mode 100644 index 0000000000..f41ba4d36a --- /dev/null +++ b/t/t4013/diff.diff_--line-prefix_--cached_--_file0 @@ -0,0 +1,15 @@ +| | | diff --git a/file0 b/file0 +| | | new file mode 100644 +| | | index 0000000..10a8a9f +| | | --- /dev/null +| | | +++ b/file0 +| | | @@ -0,0 +1,9 @@ +| | | +1 +| | | +2 +| | | +3 +| | | +4 +| | | +5 +| | | +6 +| | | +A +| | | +B +| | | +C diff --git a/t/t4013/diff.diff_--no-index_--raw_--abbrev=4_dir2_dir b/t/t4013/diff.diff_--no-index_--raw_--abbrev=4_dir2_dir new file mode 100644 index 0000000000..a71b38a833 --- /dev/null +++ b/t/t4013/diff.diff_--no-index_--raw_--abbrev=4_dir2_dir @@ -0,0 +1,3 @@ +$ git diff --no-index --raw --abbrev=4 dir2 dir +:000000 100644 0000... 0000... A dir/sub +$ diff --git a/t/t4013/diff.diff_--no-index_--raw_--no-abbrev_dir2_dir b/t/t4013/diff.diff_--no-index_--raw_--no-abbrev_dir2_dir new file mode 100644 index 0000000000..e0f00977c8 --- /dev/null +++ b/t/t4013/diff.diff_--no-index_--raw_--no-abbrev_dir2_dir @@ -0,0 +1,3 @@ +$ git diff --no-index --raw --no-abbrev dir2 dir +:000000 100644 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 A dir/sub +$ diff --git a/t/t4013/diff.diff_--no-index_--raw_dir2_dir b/t/t4013/diff.diff_--no-index_--raw_dir2_dir new file mode 100644 index 0000000000..3cb4ee7a9a --- /dev/null +++ b/t/t4013/diff.diff_--no-index_--raw_dir2_dir @@ -0,0 +1,3 @@ +$ git diff --no-index --raw dir2 dir +:000000 100644 0000000... 0000000... A dir/sub +$ diff --git a/t/t4013/diff.diff_--raw_--abbrev=4_initial b/t/t4013/diff.diff_--raw_--abbrev=4_initial new file mode 100644 index 0000000000..c3641db31d --- /dev/null +++ b/t/t4013/diff.diff_--raw_--abbrev=4_initial @@ -0,0 +1,6 @@ +$ git diff --raw --abbrev=4 initial +:100644 100644 35d2... 9929... M dir/sub +:100644 100644 01e7... 10a8... M file0 +:000000 100644 0000... b1e6... A file1 +:100644 000000 01e7... 0000... D file2 +$ diff --git a/t/t4013/diff.diff_--raw_--no-abbrev_initial b/t/t4013/diff.diff_--raw_--no-abbrev_initial new file mode 100644 index 0000000000..c87a1258e3 --- /dev/null +++ b/t/t4013/diff.diff_--raw_--no-abbrev_initial @@ -0,0 +1,6 @@ +$ git diff --raw --no-abbrev initial +:100644 100644 35d242ba79ae89ac695e26b3d4c27a8e6f028f9e 992913c5aa0a5476d10c49ed0f21fc0c6d1aedf3 M dir/sub +:100644 100644 01e79c32a8c99c557f0757da7cb6d65b3414466d 10a8a9f3657f91a156b9f0184ed79a20adef9f7f M file0 +:000000 100644 0000000000000000000000000000000000000000 b1e67221afe8461efd244b487afca22d46b95eb8 A file1 +:100644 000000 01e79c32a8c99c557f0757da7cb6d65b3414466d 0000000000000000000000000000000000000000 D file2 +$ diff --git a/t/t4013/diff.diff_--raw_initial b/t/t4013/diff.diff_--raw_initial new file mode 100644 index 0000000000..a3e978040d --- /dev/null +++ b/t/t4013/diff.diff_--raw_initial @@ -0,0 +1,6 @@ +$ git diff --raw initial +:100644 100644 35d242b... 992913c... M dir/sub +:100644 100644 01e79c3... 10a8a9f... M file0 +:000000 100644 0000000... b1e6722... A file1 +:100644 000000 01e79c3... 0000000... D file2 +$ diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index c39e50028f..482112ca33 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -57,6 +57,14 @@ test_expect_success "format-patch --ignore-if-in-upstream" ' ' +test_expect_success "format-patch --ignore-if-in-upstream handles tags" ' + git tag -a v1 -m tag side && + git tag -a v2 -m tag master && + git format-patch --stdout --ignore-if-in-upstream v2..v1 >patch1 && + cnt=$(grep "^From " patch1 | wc -l) && + test $cnt = 2 +' + test_expect_success "format-patch doesn't consider merge commits" ' git checkout -b slave master && @@ -221,6 +229,46 @@ check_patch () { grep -e "^Subject:" "$1" } +test_expect_success 'format.from=false' ' + + git -c format.from=false format-patch --stdout master..side | + sed -e "/^\$/q" >patch && + check_patch patch && + ! grep "^From: C O Mitter <committer@example.com>\$" patch +' + +test_expect_success 'format.from=true' ' + + git -c format.from=true format-patch --stdout master..side | + sed -e "/^\$/q" >patch && + check_patch patch && + grep "^From: C O Mitter <committer@example.com>\$" patch +' + +test_expect_success 'format.from with address' ' + + git -c format.from="F R Om <from@example.com>" format-patch --stdout master..side | + sed -e "/^\$/q" >patch && + check_patch patch && + grep "^From: F R Om <from@example.com>\$" patch +' + +test_expect_success '--no-from overrides format.from' ' + + git -c format.from="F R Om <from@example.com>" format-patch --no-from --stdout master..side | + sed -e "/^\$/q" >patch && + check_patch patch && + ! grep "^From: F R Om <from@example.com>\$" patch +' + +test_expect_success '--from overrides format.from' ' + + git -c format.from="F R Om <from@example.com>" format-patch --from --stdout master..side | + sed -e "/^\$/q" >patch && + check_patch patch && + ! grep "^From: F R Om <from@example.com>\$" patch +' + test_expect_success '--no-to overrides config.to' ' git config --replace-all format.to \ @@ -541,7 +589,7 @@ test_expect_success 'cover-letter inherits diff options' ' git mv file foo && git commit -m foo && - git format-patch --cover-letter -1 && + git format-patch --no-renames --cover-letter -1 && check_patch 0000-cover-letter.patch && ! grep "file => foo .* 0 *\$" 0000-cover-letter.patch && git format-patch --cover-letter -1 -M && @@ -695,7 +743,7 @@ test_expect_success 'options no longer allowed for format-patch' ' test_expect_success 'format-patch --numstat should produce a patch' ' git format-patch --numstat --stdout master..side > output && - test 6 = $(grep "^diff --git a/" output | wc -l)' + test 5 = $(grep "^diff --git a/" output | wc -l)' test_expect_success 'format-patch -- <path>' ' git format-patch master..side -- file 2>error && @@ -706,9 +754,22 @@ test_expect_success 'format-patch --ignore-if-in-upstream HEAD' ' git format-patch --ignore-if-in-upstream HEAD ' +git_version="$(git --version | sed "s/.* //")" + +signature() { + printf "%s\n%s\n\n" "-- " "${1:-$git_version}" +} + +test_expect_success 'format-patch default signature' ' + git format-patch --stdout -1 | tail -n 3 >output && + signature >expect && + test_cmp expect output +' + test_expect_success 'format-patch --signature' ' - git format-patch --stdout --signature="my sig" -1 >output && - grep "my sig" output + git format-patch --stdout --signature="my sig" -1 | tail -n 3 >output && + signature "my sig" >expect && + test_cmp expect output ' test_expect_success 'format-patch with format.signature config' ' @@ -1025,6 +1086,15 @@ test_expect_success 'empty subject prefix does not have extra space' ' test_cmp expect actual ' +test_expect_success '--rfc' ' + cat >expect <<-\EOF && + Subject: [RFC PATCH 1/1] header with . in it + EOF + git format-patch -n -1 --stdout --rfc >patch && + grep ^Subject: patch >actual && + test_cmp expect actual +' + test_expect_success '--from=ident notices bogus ident' ' test_must_fail git format-patch -1 --stdout --from=foo >patch ' @@ -1064,7 +1134,7 @@ test_expect_success '--from omits redundant in-body header' ' ' test_expect_success 'in-body headers trigger content encoding' ' - GIT_AUTHOR_NAME="éxötìc" test_commit exotic && + test_env GIT_AUTHOR_NAME="éxötìc" test_commit exotic && test_when_finished "git reset --hard HEAD^" && git format-patch -1 --stdout --from >patch && cat >expect <<-\EOF && @@ -1224,8 +1294,7 @@ EOF 4:Subject: [PATCH] subject 8: 10:Signed-off-by: example happens to be wrapped here. -11: -12:Signed-off-by: C O Mitter <committer@example.com> +11:Signed-off-by: C O Mitter <committer@example.com> EOF test_cmp expected actual ' @@ -1298,7 +1367,7 @@ EOF test_cmp expected actual ' -test_expect_success 'signoff: detect garbage in non-conforming footer' ' +test_expect_success 'signoff: tolerate garbage in conforming footer' ' append_signoff <<\EOF >actual && subject @@ -1313,8 +1382,36 @@ EOF 8: 10: 13:Signed-off-by: C O Mitter <committer@example.com> -14: -15:Signed-off-by: C O Mitter <committer@example.com> +EOF + test_cmp expected actual +' + +test_expect_success 'signoff: respect trailer config' ' + append_signoff <<\EOF >actual && +subject + +Myfooter: x +Some Trash +EOF + cat >expected <<\EOF && +4:Subject: [PATCH] subject +8: +11: +12:Signed-off-by: C O Mitter <committer@example.com> +EOF + test_cmp expected actual && + + test_config trailer.Myfooter.ifexists add && + append_signoff <<\EOF >actual && +subject + +Myfooter: x +Some Trash +EOF + cat >expected <<\EOF && +4:Subject: [PATCH] subject +8: +11:Signed-off-by: C O Mitter <committer@example.com> EOF test_cmp expected actual ' @@ -1423,4 +1520,187 @@ test_expect_success 'cover letter auto user override' ' test_line_count = 2 list ' +test_expect_success 'format-patch --zero-commit' ' + git format-patch --zero-commit --stdout v2..v1 >patch2 && + grep "^From " patch2 | sort | uniq >actual && + echo "From $_z40 Mon Sep 17 00:00:00 2001" >expect && + test_cmp expect actual +' + +test_expect_success 'From line has expected format' ' + git format-patch --stdout v2..v1 >patch2 && + grep "^From " patch2 >from && + grep "^From $_x40 Mon Sep 17 00:00:00 2001$" patch2 >filtered && + test_cmp from filtered +' + +test_expect_success 'format-patch format.outputDirectory option' ' + test_config format.outputDirectory patches && + rm -fr patches && + git format-patch master..side && + test $(git rev-list master..side | wc -l) -eq $(ls patches | wc -l) +' + +test_expect_success 'format-patch -o overrides format.outputDirectory' ' + test_config format.outputDirectory patches && + rm -fr patches patchset && + git format-patch master..side -o patchset && + test_path_is_missing patches && + test_path_is_dir patchset +' + +test_expect_success 'format-patch --base' ' + git checkout side && + git format-patch --stdout --base=HEAD~3 -1 | tail -n 7 >actual && + echo >expected && + echo "base-commit: $(git rev-parse HEAD~3)" >>expected && + echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --stable | awk "{print \$1}")" >>expected && + echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --stable | awk "{print \$1}")" >>expected && + signature >> expected && + test_cmp expected actual +' + +test_expect_success 'format-patch --base errors out when base commit is in revision list' ' + test_must_fail git format-patch --base=HEAD -2 && + test_must_fail git format-patch --base=HEAD~1 -2 && + git format-patch --stdout --base=HEAD~2 -2 >patch && + grep "^base-commit:" patch >actual && + echo "base-commit: $(git rev-parse HEAD~2)" >expected && + test_cmp expected actual +' + +test_expect_success 'format-patch --base errors out when base commit is not ancestor of revision list' ' + # For history as below: + # + # ---Q---P---Z---Y---*---X + # \ / + # ------------W + # + # If "format-patch Z..X" is given, P and Z can not be specified as the base commit + git checkout -b topic1 master && + git rev-parse HEAD >commit-id-base && + test_commit P && + git rev-parse HEAD >commit-id-P && + test_commit Z && + git rev-parse HEAD >commit-id-Z && + test_commit Y && + git checkout -b topic2 master && + test_commit W && + git merge topic1 && + test_commit X && + test_must_fail git format-patch --base=$(cat commit-id-P) -3 && + test_must_fail git format-patch --base=$(cat commit-id-Z) -3 && + git format-patch --stdout --base=$(cat commit-id-base) -3 >patch && + grep "^base-commit:" patch >actual && + echo "base-commit: $(cat commit-id-base)" >expected && + test_cmp expected actual +' + +test_expect_success 'format-patch --base=auto' ' + git checkout -b upstream master && + git checkout -b local upstream && + git branch --set-upstream-to=upstream && + test_commit N1 && + test_commit N2 && + git format-patch --stdout --base=auto -2 >patch && + grep "^base-commit:" patch >actual && + echo "base-commit: $(git rev-parse upstream)" >expected && + test_cmp expected actual +' + +test_expect_success 'format-patch errors out when history involves criss-cross' ' + # setup criss-cross history + # + # B---M1---D + # / \ / + # A X + # \ / \ + # C---M2---E + # + git checkout master && + test_commit A && + git checkout -b xb master && + test_commit B && + git checkout -b xc master && + test_commit C && + git checkout -b xbc xb -- && + git merge xc && + git checkout -b xcb xc -- && + git branch --set-upstream-to=xbc && + git merge xb && + git checkout xbc && + test_commit D && + git checkout xcb && + test_commit E && + test_must_fail git format-patch --base=auto -1 +' + +test_expect_success 'format-patch format.useAutoBaseoption' ' + test_when_finished "git config --unset format.useAutoBase" && + git checkout local && + git config format.useAutoBase true && + git format-patch --stdout -1 >patch && + grep "^base-commit:" patch >actual && + echo "base-commit: $(git rev-parse upstream)" >expected && + test_cmp expected actual +' + +test_expect_success 'format-patch --base overrides format.useAutoBase' ' + test_when_finished "git config --unset format.useAutoBase" && + git config format.useAutoBase true && + git format-patch --stdout --base=HEAD~1 -1 >patch && + grep "^base-commit:" patch >actual && + echo "base-commit: $(git rev-parse HEAD~1)" >expected && + test_cmp expected actual +' + +test_expect_success 'format-patch --base with --attach' ' + git format-patch --attach=mimemime --stdout --base=HEAD~ -1 >patch && + sed -n -e "/^base-commit:/s/.*/1/p" -e "/^---*mimemime--$/s/.*/2/p" \ + patch >actual && + test_write_lines 1 2 >expect && + test_cmp expect actual +' + +test_expect_success 'format-patch --pretty=mboxrd' ' + sp=" " && + cat >msg <<-INPUT_END && + mboxrd should escape the body + + From could trip up a loose mbox parser + >From extra escape for reversibility + >>From extra escape for reversibility 2 + from lower case not escaped + Fromm bad speling not escaped + From with leading space not escaped + + F + From + From$sp + From $sp + From $sp + INPUT_END + + cat >expect <<-INPUT_END && + >From could trip up a loose mbox parser + >>From extra escape for reversibility + >>>From extra escape for reversibility 2 + from lower case not escaped + Fromm bad speling not escaped + From with leading space not escaped + + F + From + From + From + From + INPUT_END + + C=$(git commit-tree HEAD^^{tree} -p HEAD <msg) && + git format-patch --pretty=mboxrd --stdout -1 $C~1..$C >patch && + git grep -h --no-index -A11 \ + "^>From could trip up a loose mbox parser" patch >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index 2434157aa7..289806d0c7 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -869,7 +869,8 @@ test_expect_success 'diff that introduces and removes ws breakages' ' test_cmp expected current ' -test_expect_success 'the same with --ws-error-highlight' ' +test_expect_success 'ws-error-highlight test setup' ' + git reset --hard && { echo "0. blank-at-eol " && @@ -882,10 +883,7 @@ test_expect_success 'the same with --ws-error-highlight' ' echo "2. and a new line " } >x && - git -c color.diff=always diff --ws-error-highlight=default,old | - test_decode_color >current && - - cat >expected <<-\EOF && + cat >expect.default-old <<-\EOF && <BOLD>diff --git a/x b/x<RESET> <BOLD>index d0233a2..700886e 100644<RESET> <BOLD>--- a/x<RESET> @@ -897,12 +895,7 @@ test_expect_success 'the same with --ws-error-highlight' ' <GREEN>+<RESET><GREEN>2. and a new line<RESET><BLUE> <RESET> EOF - test_cmp expected current && - - git -c color.diff=always diff --ws-error-highlight=all | - test_decode_color >current && - - cat >expected <<-\EOF && + cat >expect.all <<-\EOF && <BOLD>diff --git a/x b/x<RESET> <BOLD>index d0233a2..700886e 100644<RESET> <BOLD>--- a/x<RESET> @@ -914,12 +907,7 @@ test_expect_success 'the same with --ws-error-highlight' ' <GREEN>+<RESET><GREEN>2. and a new line<RESET><BLUE> <RESET> EOF - test_cmp expected current && - - git -c color.diff=always diff --ws-error-highlight=none | - test_decode_color >current && - - cat >expected <<-\EOF && + cat >expect.none <<-\EOF <BOLD>diff --git a/x b/x<RESET> <BOLD>index d0233a2..700886e 100644<RESET> <BOLD>--- a/x<RESET> @@ -931,7 +919,57 @@ test_expect_success 'the same with --ws-error-highlight' ' <GREEN>+2. and a new line <RESET> EOF - test_cmp expected current +' + +test_expect_success 'test --ws-error-highlight option' ' + + git -c color.diff=always diff --ws-error-highlight=default,old | + test_decode_color >current && + test_cmp expect.default-old current && + + git -c color.diff=always diff --ws-error-highlight=all | + test_decode_color >current && + test_cmp expect.all current && + + git -c color.diff=always diff --ws-error-highlight=none | + test_decode_color >current && + test_cmp expect.none current + +' + +test_expect_success 'test diff.wsErrorHighlight config' ' + + git -c color.diff=always -c diff.wsErrorHighlight=default,old diff | + test_decode_color >current && + test_cmp expect.default-old current && + + git -c color.diff=always -c diff.wsErrorHighlight=all diff | + test_decode_color >current && + test_cmp expect.all current && + + git -c color.diff=always -c diff.wsErrorHighlight=none diff | + test_decode_color >current && + test_cmp expect.none current + +' + +test_expect_success 'option overrides diff.wsErrorHighlight' ' + + git -c color.diff=always -c diff.wsErrorHighlight=none \ + diff --ws-error-highlight=default,old | + test_decode_color >current && + test_cmp expect.default-old current && + + git -c color.diff=always -c diff.wsErrorHighlight=default \ + diff --ws-error-highlight=all | + test_decode_color >current && + test_cmp expect.all current && + + git -c color.diff=always -c diff.wsErrorHighlight=all \ + diff --ws-error-highlight=none | + test_decode_color >current && + test_cmp expect.none current + ' test_done diff --git a/t/t4016-diff-quote.sh b/t/t4016-diff-quote.sh index cd543ecc54..9c48e5c2c9 100755 --- a/t/t4016-diff-quote.sh +++ b/t/t4016-diff-quote.sh @@ -13,6 +13,7 @@ P1='pathname with HT' P2='pathname with SP' P3='pathname with LF' +test_have_prereq !MINGW && echo 2>/dev/null >"$P1" && test -f "$P1" && rm -f "$P1" || { skip_all='Your filesystem does not allow tabs in filenames' test_done diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index 1dbaa3864a..1795ffc3aa 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -30,7 +30,9 @@ diffpatterns=" bibtex cpp csharp + css fortran + fountain html java matlab diff --git a/t/t4018/css-brace-in-col-1 b/t/t4018/css-brace-in-col-1 new file mode 100644 index 0000000000..7831577506 --- /dev/null +++ b/t/t4018/css-brace-in-col-1 @@ -0,0 +1,5 @@ +RIGHT label.control-label +{ + margin-top: 10px!important; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/css-colon-eol b/t/t4018/css-colon-eol new file mode 100644 index 0000000000..5a30553d29 --- /dev/null +++ b/t/t4018/css-colon-eol @@ -0,0 +1,4 @@ +RIGHT h1 { +color: +ChangeMe; +} diff --git a/t/t4018/css-colon-selector b/t/t4018/css-colon-selector new file mode 100644 index 0000000000..c6d71fb42d --- /dev/null +++ b/t/t4018/css-colon-selector @@ -0,0 +1,5 @@ +RIGHT a:hover { + margin-top: + 10px!important; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/css-common b/t/t4018/css-common new file mode 100644 index 0000000000..84ed754b33 --- /dev/null +++ b/t/t4018/css-common @@ -0,0 +1,4 @@ +RIGHT label.control-label { + margin-top: 10px!important; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/css-long-selector-list b/t/t4018/css-long-selector-list new file mode 100644 index 0000000000..7ccd25d9ed --- /dev/null +++ b/t/t4018/css-long-selector-list @@ -0,0 +1,6 @@ +p.header, +label.control-label, +div ul#RIGHT { + margin-top: 10px!important; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/css-prop-sans-indent b/t/t4018/css-prop-sans-indent new file mode 100644 index 0000000000..a9e3c86b3c --- /dev/null +++ b/t/t4018/css-prop-sans-indent @@ -0,0 +1,5 @@ +RIGHT, label.control-label { +margin-top: 10px!important; +padding: 0; +border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/css-short-selector-list b/t/t4018/css-short-selector-list new file mode 100644 index 0000000000..6a0bdee336 --- /dev/null +++ b/t/t4018/css-short-selector-list @@ -0,0 +1,4 @@ +label.control, div ul#RIGHT { + margin-top: 10px!important; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/css-trailing-space b/t/t4018/css-trailing-space new file mode 100644 index 0000000000..32b5606c70 --- /dev/null +++ b/t/t4018/css-trailing-space @@ -0,0 +1,5 @@ +RIGHT label.control-label { + margin:10px; + padding:10px; + border : 10px ChangeMe #C6C6C6; +} diff --git a/t/t4018/fountain-scene b/t/t4018/fountain-scene new file mode 100644 index 0000000000..6b3257d680 --- /dev/null +++ b/t/t4018/fountain-scene @@ -0,0 +1,4 @@ +EXT. STREET RIGHT OUTSIDE - DAY + +CHARACTER +You didn't say the magic phrase, "ChangeMe". diff --git a/t/t4021-format-patch-numbered.sh b/t/t4021-format-patch-numbered.sh index 886494b58f..9be65fd444 100755 --- a/t/t4021-format-patch-numbered.sh +++ b/t/t4021-format-patch-numbered.sh @@ -36,6 +36,11 @@ test_no_numbered() { test_num_no_numbered $1 2 } +test_single_cover_letter_numbered() { + grep "^Subject: \[PATCH 0/1\]" $1 && + grep "^Subject: \[PATCH 1/1\]" $1 +} + test_single_numbered() { grep "^Subject: \[PATCH 1/1\]" $1 } @@ -121,4 +126,16 @@ test_expect_success '--start-number && --numbered' ' grep "^Subject: \[PATCH 3/3\]" patch8 ' +test_expect_success 'single patch with cover-letter defaults to numbers' ' + git format-patch --cover-letter --stdout HEAD~1 >patch9.single && + test_single_cover_letter_numbered patch9.single +' + +test_expect_success 'Use --no-numbered and --cover-letter single patch' ' + git format-patch --no-numbered --stdout --cover-letter HEAD~1 >patch10 && + test_no_numbered patch10 +' + + + test_done diff --git a/t/t4026-color.sh b/t/t4026-color.sh index 2b32c4fbe6..ec78c5e3ac 100755 --- a/t/t4026-color.sh +++ b/t/t4026-color.sh @@ -50,14 +50,19 @@ test_expect_success 'attr negation' ' color "nobold nodim noul noblink noreverse" "[22;24;25;27m" ' +test_expect_success '"no-" variant of negation' ' + color "no-bold no-blink" "[22;25m" +' + test_expect_success 'long color specification' ' color "254 255 bold dim ul blink reverse" "[1;2;4;5;7;38;5;254;48;5;255m" ' test_expect_success 'absurdly long color specification' ' color \ - "#ffffff #ffffff bold nobold dim nodim ul noul blink noblink reverse noreverse" \ - "[1;2;4;5;7;22;24;25;27;38;2;255;255;255;48;2;255;255;255m" + "#ffffff #ffffff bold nobold dim nodim italic noitalic + ul noul blink noblink reverse noreverse strike nostrike" \ + "[1;2;3;4;5;7;9;22;23;24;25;27;29;38;2;255;255;255;48;2;255;255;255m" ' test_expect_success '0-7 are aliases for basic ANSI color names' ' diff --git a/t/t4032-diff-inter-hunk-context.sh b/t/t4032-diff-inter-hunk-context.sh index e4e3e28fc7..bada0cbd32 100755 --- a/t/t4032-diff-inter-hunk-context.sh +++ b/t/t4032-diff-inter-hunk-context.sh @@ -16,11 +16,15 @@ f() { } t() { + use_config= + git config --unset diff.interHunkContext + case $# in 4) hunks=$4; cmd="diff -U$3";; 5) hunks=$5; cmd="diff -U$3 --inter-hunk-context=$4";; + 6) hunks=$5; cmd="diff -U$3"; git config diff.interHunkContext $4; use_config="(diff.interHunkContext=$4) ";; esac - label="$cmd, $1 common $2" + label="$use_config$cmd, $1 common $2" file=f$1 expected=expected.$file.$3.$hunks @@ -89,4 +93,25 @@ t 9 lines 3 2 t 9 lines 3 2 2 t 9 lines 3 3 1 +# use diff.interHunkContext? +t 1 line 0 0 2 config +t 1 line 0 1 1 config +t 1 line 0 2 1 config +t 9 lines 3 3 1 config +t 2 lines 0 0 2 config +t 2 lines 0 1 2 config +t 2 lines 0 2 1 config +t 3 lines 1 0 2 config +t 3 lines 1 1 1 config +t 3 lines 1 2 1 config +t 9 lines 3 2 2 config +t 9 lines 3 3 1 config + +test_expect_success 'diff.interHunkContext invalid' ' + git config diff.interHunkContext asdf && + test_must_fail git diff && + git config diff.interHunkContext -1 && + test_must_fail git diff +' + test_done diff --git a/t/t4033-diff-patience.sh b/t/t4033-diff-patience.sh index 3c9932edf3..113304dc59 100755 --- a/t/t4033-diff-patience.sh +++ b/t/t4033-diff-patience.sh @@ -5,6 +5,14 @@ test_description='patience diff algorithm' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-diff-alternative.sh +test_expect_success '--ignore-space-at-eol with a single appended character' ' + printf "a\nb\nc\n" >pre && + printf "a\nbX\nc\n" >post && + test_must_fail git diff --no-index \ + --patience --ignore-space-at-eol pre post >diff && + grep "^+.*X" diff +' + test_diff_frobnitz "patience" test_diff_unique "patience" diff --git a/t/t4034-diff-words.sh b/t/t4034-diff-words.sh index f2f55fc51c..912df91226 100755 --- a/t/t4034-diff-words.sh +++ b/t/t4034-diff-words.sh @@ -302,6 +302,7 @@ test_language_driver ada test_language_driver bibtex test_language_driver cpp test_language_driver csharp +test_language_driver css test_language_driver fortran test_language_driver html test_language_driver java diff --git a/t/t4034/css/expect b/t/t4034/css/expect new file mode 100644 index 0000000000..ed10393bda --- /dev/null +++ b/t/t4034/css/expect @@ -0,0 +1,16 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index b8ae0bb..fe500b7 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,10 +1,10 @@<RESET> +.<RED>class-form<RESET><GREEN>other-form<RESET> label.control-label { + margin-top: <RED>10<RESET><GREEN>15<RESET>px!important; + border : 10px <RED>dashed<RESET><GREEN>dotted<RESET> #C6C6C6; +}<RESET> +<RED>#CCCCCC<RESET><GREEN>#CCCCCB<RESET> +10em<RESET> +<RED>padding-bottom<RESET><GREEN>margin-left<RESET> +150<RED>px<RESET><GREEN>em<RESET> +10px +<RED>!important<RESET> +<RED>div<RESET><GREEN>li<RESET>.class#id diff --git a/t/t4034/css/post b/t/t4034/css/post new file mode 100644 index 0000000000..fe500b7a4f --- /dev/null +++ b/t/t4034/css/post @@ -0,0 +1,10 @@ +.other-form label.control-label { + margin-top: 15px!important; + border : 10px dotted #C6C6C6; +} +#CCCCCB +10em +margin-left +150em +10px +li.class#id diff --git a/t/t4034/css/pre b/t/t4034/css/pre new file mode 100644 index 0000000000..b8ae0bb48f --- /dev/null +++ b/t/t4034/css/pre @@ -0,0 +1,10 @@ +.class-form label.control-label { + margin-top: 10px!important; + border : 10px dashed #C6C6C6; +} +#CCCCCC +10em +padding-bottom +150px +10px!important +div.class#id diff --git a/t/t4047-diff-dirstat.sh b/t/t4047-diff-dirstat.sh index 3b8b7921d6..447a8ffa3a 100755 --- a/t/t4047-diff-dirstat.sh +++ b/t/t4047-diff-dirstat.sh @@ -248,7 +248,8 @@ EOF git rm -r src/move/unchanged && git rm -r src/move/changed && git rm -r src/move/rearranged && - git commit -m "changes" + git commit -m "changes" && + git config diff.renames false ' cat <<EOF >expect_diff_stat diff --git a/t/t4051-diff-function-context.sh b/t/t4051-diff-function-context.sh index 001d678e09..6154acb456 100755 --- a/t/t4051-diff-function-context.sh +++ b/t/t4051-diff-function-context.sh @@ -3,90 +3,205 @@ test_description='diff function context' . ./test-lib.sh -. "$TEST_DIRECTORY"/diff-lib.sh +dir="$TEST_DIRECTORY/t4051" -cat <<\EOF >hello.c -#include <stdio.h> - -static int a(void) -{ - /* - * Dummy. - */ +commit_and_tag () { + tag=$1 && + shift && + git add "$@" && + test_tick && + git commit -m "$tag" && + git tag "$tag" } -static int hello_world(void) -{ - /* Classic. */ - printf("Hello world.\n"); - - /* Success! */ - return 0; +first_context_line () { + awk ' + found {print; exit} + /^@@/ {found = 1} + ' } -static int b(void) -{ - /* - * Dummy, too. - */ + +last_context_line () { + sed -ne \$p } -int main(int argc, char **argv) -{ - a(); - b(); - return hello_world(); +check_diff () { + name=$1 + desc=$2 + options="-W $3" + + test_expect_success "$desc" ' + git diff $options "$name^" "$name" >"$name.diff" + ' + + test_expect_success ' diff applies' ' + test_when_finished "git reset --hard" && + git checkout --detach "$name^" && + git apply --index "$name.diff" && + git diff --exit-code "$name" + ' } -EOF test_expect_success 'setup' ' - git add hello.c && - test_tick && - git commit -m initial && - - grep -v Classic <hello.c >hello.c.new && - mv hello.c.new hello.c -' - -cat <<\EOF >expected -diff --git a/hello.c b/hello.c ---- a/hello.c -+++ b/hello.c -@@ -10,8 +10,7 @@ static int a(void) - static int hello_world(void) - { -- /* Classic. */ - printf("Hello world.\n"); - - /* Success! */ - return 0; - } -EOF - -test_expect_success 'diff -U0 -W' ' - git diff -U0 -W >actual && - compare_diff_patch actual expected -' - -cat <<\EOF >expected -diff --git a/hello.c b/hello.c ---- a/hello.c -+++ b/hello.c -@@ -9,9 +9,8 @@ static int a(void) - - static int hello_world(void) - { -- /* Classic. */ - printf("Hello world.\n"); - - /* Success! */ - return 0; - } -EOF - -test_expect_success 'diff -W' ' - git diff -W >actual && - compare_diff_patch actual expected + cat "$dir/includes.c" "$dir/dummy.c" "$dir/dummy.c" "$dir/hello.c" \ + "$dir/dummy.c" "$dir/dummy.c" >file.c && + commit_and_tag initial file.c && + + grep -v "delete me from hello" <file.c >file.c.new && + mv file.c.new file.c && + commit_and_tag changed_hello file.c && + + grep -v "delete me from includes" <file.c >file.c.new && + mv file.c.new file.c && + commit_and_tag changed_includes file.c && + + cat "$dir/appended1.c" >>file.c && + commit_and_tag appended file.c && + + cat "$dir/appended2.c" >>file.c && + commit_and_tag extended file.c && + + grep -v "Begin of second part" <file.c >file.c.new && + mv file.c.new file.c && + commit_and_tag long_common_tail file.c && + + git checkout initial && + cat "$dir/hello.c" "$dir/dummy.c" >file.c && + commit_and_tag hello_dummy file.c && + + # overlap function context of 1st change and -u context of 2nd change + grep -v "delete me from hello" <"$dir/hello.c" >file.c && + sed 2p <"$dir/dummy.c" >>file.c && + commit_and_tag changed_hello_dummy file.c && + + git checkout initial && + grep -v "delete me from hello" <file.c >file.c.new && + mv file.c.new file.c && + cat "$dir/appended1.c" >>file.c && + commit_and_tag changed_hello_appended file.c +' + +check_diff changed_hello 'changed function' + +test_expect_success ' context includes begin' ' + grep "^ .*Begin of hello" changed_hello.diff +' + +test_expect_success ' context includes end' ' + grep "^ .*End of hello" changed_hello.diff +' + +test_expect_success ' context does not include other functions' ' + test $(grep -c "^[ +-].*Begin" changed_hello.diff) -le 1 +' + +test_expect_success ' context does not include preceding empty lines' ' + test "$(first_context_line <changed_hello.diff)" != " " +' + +test_expect_success ' context does not include trailing empty lines' ' + test "$(last_context_line <changed_hello.diff)" != " " +' + +check_diff changed_includes 'changed includes' + +test_expect_success ' context includes begin' ' + grep "^ .*Begin.h" changed_includes.diff +' + +test_expect_success ' context includes end' ' + grep "^ .*End.h" changed_includes.diff +' + +test_expect_success ' context does not include other functions' ' + test $(grep -c "^[ +-].*Begin" changed_includes.diff) -le 1 +' + +test_expect_success ' context does not include trailing empty lines' ' + test "$(last_context_line <changed_includes.diff)" != " " +' + +check_diff appended 'appended function' + +test_expect_success ' context includes begin' ' + grep "^[+].*Begin of first part" appended.diff +' + +test_expect_success ' context includes end' ' + grep "^[+].*End of first part" appended.diff +' + +test_expect_success ' context does not include other functions' ' + test $(grep -c "^[ +-].*Begin" appended.diff) -le 1 +' + +check_diff extended 'appended function part' + +test_expect_success ' context includes begin' ' + grep "^ .*Begin of first part" extended.diff +' + +test_expect_success ' context includes end' ' + grep "^[+].*End of second part" extended.diff +' + +test_expect_success ' context does not include other functions' ' + test $(grep -c "^[ +-].*Begin" extended.diff) -le 2 +' + +test_expect_success ' context does not include preceding empty lines' ' + test "$(first_context_line <extended.diff)" != " " +' + +check_diff long_common_tail 'change with long common tail and no context' -U0 + +test_expect_success ' context includes begin' ' + grep "^ .*Begin of first part" long_common_tail.diff +' + +test_expect_success ' context includes end' ' + grep "^ .*End of second part" long_common_tail.diff +' + +test_expect_success ' context does not include other functions' ' + test $(grep -c "^[ +-].*Begin" long_common_tail.diff) -le 2 +' + +test_expect_success ' context does not include preceding empty lines' ' + test "$(first_context_line <long_common_tail.diff.diff)" != " " +' + +check_diff changed_hello_appended 'changed function plus appended function' + +test_expect_success ' context includes begin' ' + grep "^ .*Begin of hello" changed_hello_appended.diff && + grep "^[+].*Begin of first part" changed_hello_appended.diff +' + +test_expect_success ' context includes end' ' + grep "^ .*End of hello" changed_hello_appended.diff && + grep "^[+].*End of first part" changed_hello_appended.diff +' + +test_expect_success ' context does not include other functions' ' + test $(grep -c "^[ +-].*Begin" changed_hello_appended.diff) -le 2 +' + +check_diff changed_hello_dummy 'changed two consecutive functions' + +test_expect_success ' context includes begin' ' + grep "^ .*Begin of hello" changed_hello_dummy.diff && + grep "^ .*Begin of dummy" changed_hello_dummy.diff +' + +test_expect_success ' context includes end' ' + grep "^ .*End of hello" changed_hello_dummy.diff && + grep "^ .*End of dummy" changed_hello_dummy.diff +' + +test_expect_success ' overlapping hunks are merged' ' + test $(grep -c "^@@" changed_hello_dummy.diff) -eq 1 ' test_done diff --git a/t/t4051/appended1.c b/t/t4051/appended1.c new file mode 100644 index 0000000000..a9f56f11db --- /dev/null +++ b/t/t4051/appended1.c @@ -0,0 +1,15 @@ + +int appended(void) // Begin of first part +{ + int i; + char *s = "a string"; + + printf("%s\n", s); + + for (i = 99; + i >= 0; + i--) { + printf("%d bottles of beer on the wall\n", i); + } + + printf("End of first part\n"); diff --git a/t/t4051/appended2.c b/t/t4051/appended2.c new file mode 100644 index 0000000000..e651f7147b --- /dev/null +++ b/t/t4051/appended2.c @@ -0,0 +1,35 @@ + printf("Begin of second part\n"); + + /* + * Lorem ipsum dolor sit amet, consectetuer sadipscing elitr, + * sed diam nonumy eirmod tempor invidunt ut labore et dolore + * magna aliquyam erat, sed diam voluptua. At vero eos et + * accusam et justo duo dolores et ea rebum. Stet clita kasd + * gubergren, no sea takimata sanctus est Lorem ipsum dolor + * sit amet. + * + * Lorem ipsum dolor sit amet, consectetuer sadipscing elitr, + * sed diam nonumy eirmod tempor invidunt ut labore et dolore + * magna aliquyam erat, sed diam voluptua. At vero eos et + * accusam et justo duo dolores et ea rebum. Stet clita kasd + * gubergren, no sea takimata sanctus est Lorem ipsum dolor + * sit amet. + * + * Lorem ipsum dolor sit amet, consectetuer sadipscing elitr, + * sed diam nonumy eirmod tempor invidunt ut labore et dolore + * magna aliquyam erat, sed diam voluptua. At vero eos et + * accusam et justo duo dolores et ea rebum. Stet clita kasd + * gubergren, no sea takimata sanctus est Lorem ipsum dolor + * sit amet. + * + * Lorem ipsum dolor sit amet, consectetuer sadipscing elitr, + * sed diam nonumy eirmod tempor invidunt ut labore et dolore + * magna aliquyam erat, sed diam voluptua. At vero eos et + * accusam et justo duo dolores et ea rebum. Stet clita kasd + * gubergren, no sea takimata sanctus est Lorem ipsum dolor + * sit amet. + * + */ + + return 0; +} // End of second part diff --git a/t/t4051/dummy.c b/t/t4051/dummy.c new file mode 100644 index 0000000000..a43016e870 --- /dev/null +++ b/t/t4051/dummy.c @@ -0,0 +1,7 @@ + +static int dummy(void) // Begin of dummy +{ + int rc = 0; + + return rc; +} // End of dummy diff --git a/t/t4051/hello.c b/t/t4051/hello.c new file mode 100644 index 0000000000..63b1a1e4ef --- /dev/null +++ b/t/t4051/hello.c @@ -0,0 +1,21 @@ + +static void hello(void) // Begin of hello +{ + /* + * Classic. + */ + putchar('H'); + putchar('e'); + putchar('l'); + putchar('l'); + putchar('o'); + putchar(' '); + /* delete me from hello */ + putchar('w'); + putchar('o'); + putchar('r'); + putchar('l'); + putchar('d'); + putchar('.'); + putchar('\n'); +} // End of hello diff --git a/t/t4051/includes.c b/t/t4051/includes.c new file mode 100644 index 0000000000..efc68f8bf6 --- /dev/null +++ b/t/t4051/includes.c @@ -0,0 +1,20 @@ +#include <Begin.h> +#include <unistd.h> +#include <stdio.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <stddef.h> +#include <stdlib.h> +#include <stdarg.h> +/* delete me from includes */ +#include <string.h> +#include <sys/types.h> +#include <dirent.h> +#include <sys/time.h> +#include <time.h> +#include <signal.h> +#include <assert.h> +#include <regex.h> +#include <utime.h> +#include <syslog.h> +#include <End.h> diff --git a/t/t4053-diff-no-index.sh b/t/t4053-diff-no-index.sh index 6eb83211b5..453e6c35eb 100755 --- a/t/t4053-diff-no-index.sh +++ b/t/t4053-diff-no-index.sh @@ -89,4 +89,42 @@ test_expect_success 'turning a file into a directory' ' ) ' +test_expect_success 'diff from repo subdir shows real paths (explicit)' ' + echo "diff --git a/../../non/git/a b/../../non/git/b" >expect && + test_expect_code 1 \ + git -C repo/sub \ + diff --no-index ../../non/git/a ../../non/git/b >actual && + head -n 1 <actual >actual.head && + test_cmp expect actual.head +' + +test_expect_success 'diff from repo subdir shows real paths (implicit)' ' + echo "diff --git a/../../non/git/a b/../../non/git/b" >expect && + test_expect_code 1 \ + git -C repo/sub \ + diff ../../non/git/a ../../non/git/b >actual && + head -n 1 <actual >actual.head && + test_cmp expect actual.head +' + +test_expect_success 'diff --no-index from repo subdir respects config (explicit)' ' + echo "diff --git ../../non/git/a ../../non/git/b" >expect && + test_config -C repo diff.noprefix true && + test_expect_code 1 \ + git -C repo/sub \ + diff --no-index ../../non/git/a ../../non/git/b >actual && + head -n 1 <actual >actual.head && + test_cmp expect actual.head +' + +test_expect_success 'diff --no-index from repo subdir respects config (implicit)' ' + echo "diff --git ../../non/git/a ../../non/git/b" >expect && + test_config -C repo diff.noprefix true && + test_expect_code 1 \ + git -C repo/sub \ + diff ../../non/git/a ../../non/git/b >actual && + head -n 1 <actual >actual.head && + test_cmp expect actual.head +' + test_done diff --git a/t/t4054-diff-bogus-tree.sh b/t/t4054-diff-bogus-tree.sh index 1d6efab3c5..18f42c5fff 100755 --- a/t/t4054-diff-bogus-tree.sh +++ b/t/t4054-diff-bogus-tree.sh @@ -3,8 +3,6 @@ test_description='test diff with a bogus tree containing the null sha1' . ./test-lib.sh -empty_tree=4b825dc642cb6eb9a060e54bf8d69288fbee4904 - test_expect_success 'create bogus tree' ' bogus_tree=$( printf "100644 fooQQQQQQQQQQQQQQQQQQQQQ" | @@ -22,13 +20,13 @@ test_expect_success 'create tree with matching file' ' test_expect_success 'raw diff shows null sha1 (addition)' ' echo ":000000 100644 $_z40 $_z40 A foo" >expect && - git diff-tree $empty_tree $bogus_tree >actual && + git diff-tree $EMPTY_TREE $bogus_tree >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (removal)' ' echo ":100644 000000 $_z40 $_z40 D foo" >expect && - git diff-tree $bogus_tree $empty_tree >actual && + git diff-tree $bogus_tree $EMPTY_TREE >actual && test_cmp expect actual ' @@ -57,11 +55,11 @@ test_expect_success 'raw diff shows null sha1 (index)' ' ' test_expect_success 'patch fails due to bogus sha1 (addition)' ' - test_must_fail git diff-tree -p $empty_tree $bogus_tree + test_must_fail git diff-tree -p $EMPTY_TREE $bogus_tree ' test_expect_success 'patch fails due to bogus sha1 (removal)' ' - test_must_fail git diff-tree -p $bogus_tree $empty_tree + test_must_fail git diff-tree -p $bogus_tree $EMPTY_TREE ' test_expect_success 'patch fails due to bogus sha1 (modification)' ' diff --git a/t/t4056-diff-order.sh b/t/t4056-diff-order.sh index c0460bb0e5..43dd474a12 100755 --- a/t/t4056-diff-order.sh +++ b/t/t4056-diff-order.sh @@ -68,6 +68,12 @@ test_expect_success POSIXPERM,SANITY 'unreadable orderfile' ' test_must_fail git diff -Ounreadable_file --name-only HEAD^..HEAD ' +test_expect_success "orderfile using option from subdir with --output" ' + mkdir subdir && + git -C subdir diff -O../order_file_1 --output ../actual --name-only HEAD^..HEAD && + test_cmp expect_1 actual +' + for i in 1 2 do test_expect_success "orderfile using option ($i)" ' diff --git a/t/t4059-diff-submodule-not-initialized.sh b/t/t4059-diff-submodule-not-initialized.sh new file mode 100755 index 0000000000..cd70fd5192 --- /dev/null +++ b/t/t4059-diff-submodule-not-initialized.sh @@ -0,0 +1,127 @@ +#!/bin/sh +# +# Copyright (c) 2016 Jacob Keller, based on t4041 by Jens Lehmann +# + +test_description='Test for submodule diff on non-checked out submodule + +This test tries to verify that add_submodule_odb works when the submodule was +initialized previously but the checkout has since been removed. +' + +. ./test-lib.sh + +# Tested non-UTF-8 encoding +test_encoding="ISO8859-1" + +# String "added" in German (translated with Google Translate), encoded in UTF-8, +# used in sample commit log messages in add_file() function below. +added=$(printf "hinzugef\303\274gt") + +add_file () { + ( + cd "$1" && + shift && + for name + do + echo "$name" >"$name" && + git add "$name" && + test_tick && + # "git commit -m" would break MinGW, as Windows refuse to pass + # $test_encoding encoded parameter to git. + echo "Add $name ($added $name)" | iconv -f utf-8 -t $test_encoding | + git -c "i18n.commitEncoding=$test_encoding" commit -F - + done >/dev/null && + git rev-parse --short --verify HEAD + ) +} + +commit_file () { + test_tick && + git commit "$@" -m "Commit $*" >/dev/null +} + +test_expect_success 'setup - submodules' ' + test_create_repo sm2 && + add_file . foo && + add_file sm2 foo1 foo2 && + smhead1=$(git -C sm2 rev-parse --short --verify HEAD) +' + +test_expect_success 'setup - git submodule add' ' + git submodule add ./sm2 sm1 && + commit_file sm1 .gitmodules && + git diff-tree -p --no-commit-id --submodule=log HEAD -- sm1 >actual && + cat >expected <<-EOF && + Submodule sm1 0000000...$smhead1 (new submodule) + EOF + test_cmp expected actual +' + +test_expect_success 'submodule directory removed' ' + rm -rf sm1 && + git diff-tree -p --no-commit-id --submodule=log HEAD -- sm1 >actual && + cat >expected <<-EOF && + Submodule sm1 0000000...$smhead1 (new submodule) + EOF + test_cmp expected actual +' + +test_expect_success 'setup - submodule multiple commits' ' + git submodule update --checkout sm1 && + smhead2=$(add_file sm1 foo3 foo4) && + commit_file sm1 && + git diff-tree -p --no-commit-id --submodule=log HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 $smhead1..$smhead2: + > Add foo4 ($added foo4) + > Add foo3 ($added foo3) + EOF + test_cmp expected actual +' + +test_expect_success 'submodule removed multiple commits' ' + rm -rf sm1 && + git diff-tree -p --no-commit-id --submodule=log HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 $smhead1..$smhead2: + > Add foo4 ($added foo4) + > Add foo3 ($added foo3) + EOF + test_cmp expected actual +' + +test_expect_success 'submodule not initialized in new clone' ' + git clone . sm3 && + git -C sm3 diff-tree -p --no-commit-id --submodule=log HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 $smhead1...$smhead2 (not initialized) + EOF + test_cmp expected actual +' + +test_expect_success 'setup submodule moved' ' + git submodule update --checkout sm1 && + git mv sm1 sm4 && + commit_file sm4 && + git diff-tree -p --no-commit-id --submodule=log HEAD >actual && + cat >expected <<-EOF && + Submodule sm4 0000000...$smhead2 (new submodule) + EOF + test_cmp expected actual +' + +test_expect_success 'submodule moved then removed' ' + smhead3=$(add_file sm4 foo6 foo7) && + commit_file sm4 && + rm -rf sm4 && + git diff-tree -p --no-commit-id --submodule=log HEAD >actual && + cat >expected <<-EOF && + Submodule sm4 $smhead2..$smhead3: + > Add foo7 ($added foo7) + > Add foo6 ($added foo6) + EOF + test_cmp expected actual +' + +test_done diff --git a/t/t4060-diff-submodule-option-diff-format.sh b/t/t4060-diff-submodule-option-diff-format.sh new file mode 100755 index 0000000000..7e23b55ea4 --- /dev/null +++ b/t/t4060-diff-submodule-option-diff-format.sh @@ -0,0 +1,749 @@ +#!/bin/sh +# +# Copyright (c) 2009 Jens Lehmann, based on t7401 by Ping Yin +# Copyright (c) 2011 Alexey Shumkin (+ non-UTF-8 commit encoding tests) +# Copyright (c) 2016 Jacob Keller (copy + convert to --submodule=diff) +# + +test_description='Support for diff format verbose submodule difference in git diff + +This test tries to verify the sanity of --submodule=diff option of git diff. +' + +. ./test-lib.sh + +# Tested non-UTF-8 encoding +test_encoding="ISO8859-1" + +# String "added" in German (translated with Google Translate), encoded in UTF-8, +# used in sample commit log messages in add_file() function below. +added=$(printf "hinzugef\303\274gt") + +add_file () { + ( + cd "$1" && + shift && + for name + do + echo "$name" >"$name" && + git add "$name" && + test_tick && + # "git commit -m" would break MinGW, as Windows refuse to pass + # $test_encoding encoded parameter to git. + echo "Add $name ($added $name)" | iconv -f utf-8 -t $test_encoding | + git -c "i18n.commitEncoding=$test_encoding" commit -F - + done >/dev/null && + git rev-parse --short --verify HEAD + ) +} + +commit_file () { + test_tick && + git commit "$@" -m "Commit $*" >/dev/null +} + +test_expect_success 'setup repository' ' + test_create_repo sm1 && + add_file . foo && + head1=$(add_file sm1 foo1 foo2) && + fullhead1=$(git -C sm1 rev-parse --verify HEAD) +' + +test_expect_success 'added submodule' ' + git add sm1 && + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 0000000...$head1 (new submodule) + diff --git a/sm1/foo1 b/sm1/foo1 + new file mode 100644 + index 0000000..1715acd + --- /dev/null + +++ b/sm1/foo1 + @@ -0,0 +1 @@ + +foo1 + diff --git a/sm1/foo2 b/sm1/foo2 + new file mode 100644 + index 0000000..54b060e + --- /dev/null + +++ b/sm1/foo2 + @@ -0,0 +1 @@ + +foo2 + EOF + test_cmp expected actual +' + +test_expect_success 'added submodule, set diff.submodule' ' + test_config diff.submodule log && + git add sm1 && + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 0000000...$head1 (new submodule) + diff --git a/sm1/foo1 b/sm1/foo1 + new file mode 100644 + index 0000000..1715acd + --- /dev/null + +++ b/sm1/foo1 + @@ -0,0 +1 @@ + +foo1 + diff --git a/sm1/foo2 b/sm1/foo2 + new file mode 100644 + index 0000000..54b060e + --- /dev/null + +++ b/sm1/foo2 + @@ -0,0 +1 @@ + +foo2 + EOF + test_cmp expected actual +' + +test_expect_success '--submodule=short overrides diff.submodule' ' + test_config diff.submodule log && + git add sm1 && + git diff --submodule=short --cached >actual && + cat >expected <<-EOF && + diff --git a/sm1 b/sm1 + new file mode 160000 + index 0000000..$head1 + --- /dev/null + +++ b/sm1 + @@ -0,0 +1 @@ + +Subproject commit $fullhead1 + EOF + test_cmp expected actual +' + +test_expect_success 'diff.submodule does not affect plumbing' ' + test_config diff.submodule log && + git diff-index -p HEAD >actual && + cat >expected <<-EOF && + diff --git a/sm1 b/sm1 + new file mode 160000 + index 0000000..$head1 + --- /dev/null + +++ b/sm1 + @@ -0,0 +1 @@ + +Subproject commit $fullhead1 + EOF + test_cmp expected actual +' + +commit_file sm1 && +head2=$(add_file sm1 foo3) + +test_expect_success 'modified submodule(forward)' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 $head1..$head2: + diff --git a/sm1/foo3 b/sm1/foo3 + new file mode 100644 + index 0000000..c1ec6c6 + --- /dev/null + +++ b/sm1/foo3 + @@ -0,0 +1 @@ + +foo3 + EOF + test_cmp expected actual +' + +test_expect_success 'modified submodule(forward)' ' + git diff --submodule=diff >actual && + cat >expected <<-EOF && + Submodule sm1 $head1..$head2: + diff --git a/sm1/foo3 b/sm1/foo3 + new file mode 100644 + index 0000000..c1ec6c6 + --- /dev/null + +++ b/sm1/foo3 + @@ -0,0 +1 @@ + +foo3 + EOF + test_cmp expected actual +' + +test_expect_success 'modified submodule(forward) --submodule' ' + git diff --submodule >actual && + cat >expected <<-EOF && + Submodule sm1 $head1..$head2: + > Add foo3 ($added foo3) + EOF + test_cmp expected actual +' + +fullhead2=$(cd sm1; git rev-parse --verify HEAD) +test_expect_success 'modified submodule(forward) --submodule=short' ' + git diff --submodule=short >actual && + cat >expected <<-EOF && + diff --git a/sm1 b/sm1 + index $head1..$head2 160000 + --- a/sm1 + +++ b/sm1 + @@ -1 +1 @@ + -Subproject commit $fullhead1 + +Subproject commit $fullhead2 + EOF + test_cmp expected actual +' + +commit_file sm1 && +head3=$( + cd sm1 && + git reset --hard HEAD~2 >/dev/null && + git rev-parse --short --verify HEAD +) + +test_expect_success 'modified submodule(backward)' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 $head2..$head3 (rewind): + diff --git a/sm1/foo2 b/sm1/foo2 + deleted file mode 100644 + index 54b060e..0000000 + --- a/sm1/foo2 + +++ /dev/null + @@ -1 +0,0 @@ + -foo2 + diff --git a/sm1/foo3 b/sm1/foo3 + deleted file mode 100644 + index c1ec6c6..0000000 + --- a/sm1/foo3 + +++ /dev/null + @@ -1 +0,0 @@ + -foo3 + EOF + test_cmp expected actual +' + +head4=$(add_file sm1 foo4 foo5) +test_expect_success 'modified submodule(backward and forward)' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 $head2...$head4: + diff --git a/sm1/foo2 b/sm1/foo2 + deleted file mode 100644 + index 54b060e..0000000 + --- a/sm1/foo2 + +++ /dev/null + @@ -1 +0,0 @@ + -foo2 + diff --git a/sm1/foo3 b/sm1/foo3 + deleted file mode 100644 + index c1ec6c6..0000000 + --- a/sm1/foo3 + +++ /dev/null + @@ -1 +0,0 @@ + -foo3 + diff --git a/sm1/foo4 b/sm1/foo4 + new file mode 100644 + index 0000000..a0016db + --- /dev/null + +++ b/sm1/foo4 + @@ -0,0 +1 @@ + +foo4 + diff --git a/sm1/foo5 b/sm1/foo5 + new file mode 100644 + index 0000000..d6f2413 + --- /dev/null + +++ b/sm1/foo5 + @@ -0,0 +1 @@ + +foo5 + EOF + test_cmp expected actual +' + +commit_file sm1 && +mv sm1 sm1-bak && +echo sm1 >sm1 && +head5=$(git hash-object sm1 | cut -c1-7) && +git add sm1 && +rm -f sm1 && +mv sm1-bak sm1 + +test_expect_success 'typechanged submodule(submodule->blob), --cached' ' + git diff --submodule=diff --cached >actual && + cat >expected <<-EOF && + Submodule sm1 $head4...0000000 (submodule deleted) + diff --git a/sm1/foo1 b/sm1/foo1 + deleted file mode 100644 + index 1715acd..0000000 + --- a/sm1/foo1 + +++ /dev/null + @@ -1 +0,0 @@ + -foo1 + diff --git a/sm1/foo4 b/sm1/foo4 + deleted file mode 100644 + index a0016db..0000000 + --- a/sm1/foo4 + +++ /dev/null + @@ -1 +0,0 @@ + -foo4 + diff --git a/sm1/foo5 b/sm1/foo5 + deleted file mode 100644 + index d6f2413..0000000 + --- a/sm1/foo5 + +++ /dev/null + @@ -1 +0,0 @@ + -foo5 + diff --git a/sm1 b/sm1 + new file mode 100644 + index 0000000..9da5fb8 + --- /dev/null + +++ b/sm1 + @@ -0,0 +1 @@ + +sm1 + EOF + test_cmp expected actual +' + +test_expect_success 'typechanged submodule(submodule->blob)' ' + git diff --submodule=diff >actual && + cat >expected <<-EOF && + diff --git a/sm1 b/sm1 + deleted file mode 100644 + index 9da5fb8..0000000 + --- a/sm1 + +++ /dev/null + @@ -1 +0,0 @@ + -sm1 + Submodule sm1 0000000...$head4 (new submodule) + diff --git a/sm1/foo1 b/sm1/foo1 + new file mode 100644 + index 0000000..1715acd + --- /dev/null + +++ b/sm1/foo1 + @@ -0,0 +1 @@ + +foo1 + diff --git a/sm1/foo4 b/sm1/foo4 + new file mode 100644 + index 0000000..a0016db + --- /dev/null + +++ b/sm1/foo4 + @@ -0,0 +1 @@ + +foo4 + diff --git a/sm1/foo5 b/sm1/foo5 + new file mode 100644 + index 0000000..d6f2413 + --- /dev/null + +++ b/sm1/foo5 + @@ -0,0 +1 @@ + +foo5 + EOF + test_cmp expected actual +' + +rm -rf sm1 && +git checkout-index sm1 +test_expect_success 'typechanged submodule(submodule->blob)' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 $head4...0000000 (submodule deleted) + diff --git a/sm1 b/sm1 + new file mode 100644 + index 0000000..9da5fb8 + --- /dev/null + +++ b/sm1 + @@ -0,0 +1 @@ + +sm1 + EOF + test_cmp expected actual +' + +rm -f sm1 && +test_create_repo sm1 && +head6=$(add_file sm1 foo6 foo7) +fullhead6=$(cd sm1; git rev-parse --verify HEAD) +test_expect_success 'nonexistent commit' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 $head4...$head6 (commits not present) + EOF + test_cmp expected actual +' + +commit_file +test_expect_success 'typechanged submodule(blob->submodule)' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + diff --git a/sm1 b/sm1 + deleted file mode 100644 + index 9da5fb8..0000000 + --- a/sm1 + +++ /dev/null + @@ -1 +0,0 @@ + -sm1 + Submodule sm1 0000000...$head6 (new submodule) + diff --git a/sm1/foo6 b/sm1/foo6 + new file mode 100644 + index 0000000..462398b + --- /dev/null + +++ b/sm1/foo6 + @@ -0,0 +1 @@ + +foo6 + diff --git a/sm1/foo7 b/sm1/foo7 + new file mode 100644 + index 0000000..6e9262c + --- /dev/null + +++ b/sm1/foo7 + @@ -0,0 +1 @@ + +foo7 + EOF + test_cmp expected actual +' + +commit_file sm1 && +test_expect_success 'submodule is up to date' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + EOF + test_cmp expected actual +' + +test_expect_success 'submodule contains untracked content' ' + echo new > sm1/new-file && + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 contains untracked content + EOF + test_cmp expected actual +' + +test_expect_success 'submodule contains untracked content (untracked ignored)' ' + git diff-index -p --ignore-submodules=untracked --submodule=diff HEAD >actual && + ! test -s actual +' + +test_expect_success 'submodule contains untracked content (dirty ignored)' ' + git diff-index -p --ignore-submodules=dirty --submodule=diff HEAD >actual && + ! test -s actual +' + +test_expect_success 'submodule contains untracked content (all ignored)' ' + git diff-index -p --ignore-submodules=all --submodule=diff HEAD >actual && + ! test -s actual +' + +test_expect_success 'submodule contains untracked and modified content' ' + echo new > sm1/foo6 && + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 contains untracked content + Submodule sm1 contains modified content + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..3e75765 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1 @@ + -foo6 + +new + EOF + test_cmp expected actual +' + +# NOT OK +test_expect_success 'submodule contains untracked and modified content (untracked ignored)' ' + echo new > sm1/foo6 && + git diff-index -p --ignore-submodules=untracked --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 contains modified content + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..3e75765 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1 @@ + -foo6 + +new + EOF + test_cmp expected actual +' + +test_expect_success 'submodule contains untracked and modified content (dirty ignored)' ' + echo new > sm1/foo6 && + git diff-index -p --ignore-submodules=dirty --submodule=diff HEAD >actual && + ! test -s actual +' + +test_expect_success 'submodule contains untracked and modified content (all ignored)' ' + echo new > sm1/foo6 && + git diff-index -p --ignore-submodules --submodule=diff HEAD >actual && + ! test -s actual +' + +test_expect_success 'submodule contains modified content' ' + rm -f sm1/new-file && + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 contains modified content + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..3e75765 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1 @@ + -foo6 + +new + EOF + test_cmp expected actual +' + +(cd sm1; git commit -mchange foo6 >/dev/null) && +head8=$(cd sm1; git rev-parse --short --verify HEAD) && +test_expect_success 'submodule is modified' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 17243c9..$head8: + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..3e75765 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1 @@ + -foo6 + +new + EOF + test_cmp expected actual +' + +test_expect_success 'modified submodule contains untracked content' ' + echo new > sm1/new-file && + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 contains untracked content + Submodule sm1 17243c9..$head8: + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..3e75765 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1 @@ + -foo6 + +new + EOF + test_cmp expected actual +' + +test_expect_success 'modified submodule contains untracked content (untracked ignored)' ' + git diff-index -p --ignore-submodules=untracked --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 17243c9..$head8: + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..3e75765 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1 @@ + -foo6 + +new + EOF + test_cmp expected actual +' + +test_expect_success 'modified submodule contains untracked content (dirty ignored)' ' + git diff-index -p --ignore-submodules=dirty --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 17243c9..cfce562: + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..3e75765 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1 @@ + -foo6 + +new + EOF + test_cmp expected actual +' + +test_expect_success 'modified submodule contains untracked content (all ignored)' ' + git diff-index -p --ignore-submodules=all --submodule=diff HEAD >actual && + ! test -s actual +' + +test_expect_success 'modified submodule contains untracked and modified content' ' + echo modification >> sm1/foo6 && + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 contains untracked content + Submodule sm1 contains modified content + Submodule sm1 17243c9..cfce562: + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..dfda541 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1,2 @@ + -foo6 + +new + +modification + EOF + test_cmp expected actual +' + +test_expect_success 'modified submodule contains untracked and modified content (untracked ignored)' ' + echo modification >> sm1/foo6 && + git diff-index -p --ignore-submodules=untracked --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 contains modified content + Submodule sm1 17243c9..cfce562: + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..e20e2d9 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1,3 @@ + -foo6 + +new + +modification + +modification + EOF + test_cmp expected actual +' + +test_expect_success 'modified submodule contains untracked and modified content (dirty ignored)' ' + echo modification >> sm1/foo6 && + git diff-index -p --ignore-submodules=dirty --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 17243c9..cfce562: + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..3e75765 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1 @@ + -foo6 + +new + EOF + test_cmp expected actual +' + +test_expect_success 'modified submodule contains untracked and modified content (all ignored)' ' + echo modification >> sm1/foo6 && + git diff-index -p --ignore-submodules --submodule=diff HEAD >actual && + ! test -s actual +' + +# NOT OK +test_expect_success 'modified submodule contains modified content' ' + rm -f sm1/new-file && + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 contains modified content + Submodule sm1 17243c9..cfce562: + diff --git a/sm1/foo6 b/sm1/foo6 + index 462398b..ac466ca 100644 + --- a/sm1/foo6 + +++ b/sm1/foo6 + @@ -1 +1,5 @@ + -foo6 + +new + +modification + +modification + +modification + +modification + EOF + test_cmp expected actual +' + +rm -rf sm1 +test_expect_success 'deleted submodule' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 17243c9...0000000 (submodule deleted) + EOF + test_cmp expected actual +' + +test_create_repo sm2 && +head7=$(add_file sm2 foo8 foo9) && +git add sm2 + +test_expect_success 'multiple submodules' ' + git diff-index -p --submodule=diff HEAD >actual && + cat >expected <<-EOF && + Submodule sm1 17243c9...0000000 (submodule deleted) + Submodule sm2 0000000...a5a65c9 (new submodule) + diff --git a/sm2/foo8 b/sm2/foo8 + new file mode 100644 + index 0000000..db9916b + --- /dev/null + +++ b/sm2/foo8 + @@ -0,0 +1 @@ + +foo8 + diff --git a/sm2/foo9 b/sm2/foo9 + new file mode 100644 + index 0000000..9c3b4f6 + --- /dev/null + +++ b/sm2/foo9 + @@ -0,0 +1 @@ + +foo9 + EOF + test_cmp expected actual +' + +test_expect_success 'path filter' ' + git diff-index -p --submodule=diff HEAD sm2 >actual && + cat >expected <<-EOF && + Submodule sm2 0000000...a5a65c9 (new submodule) + diff --git a/sm2/foo8 b/sm2/foo8 + new file mode 100644 + index 0000000..db9916b + --- /dev/null + +++ b/sm2/foo8 + @@ -0,0 +1 @@ + +foo8 + diff --git a/sm2/foo9 b/sm2/foo9 + new file mode 100644 + index 0000000..9c3b4f6 + --- /dev/null + +++ b/sm2/foo9 + @@ -0,0 +1 @@ + +foo9 + EOF + test_cmp expected actual +' + +commit_file sm2 +test_expect_success 'given commit' ' + git diff-index -p --submodule=diff HEAD^ >actual && + cat >expected <<-EOF && + Submodule sm1 17243c9...0000000 (submodule deleted) + Submodule sm2 0000000...a5a65c9 (new submodule) + diff --git a/sm2/foo8 b/sm2/foo8 + new file mode 100644 + index 0000000..db9916b + --- /dev/null + +++ b/sm2/foo8 + @@ -0,0 +1 @@ + +foo8 + diff --git a/sm2/foo9 b/sm2/foo9 + new file mode 100644 + index 0000000..9c3b4f6 + --- /dev/null + +++ b/sm2/foo9 + @@ -0,0 +1 @@ + +foo9 + EOF + test_cmp expected actual +' + +test_expect_success 'setup .git file for sm2' ' + (cd sm2 && + REAL="$(pwd)/../.real" && + mv .git "$REAL" + echo "gitdir: $REAL" >.git) +' + +test_expect_success 'diff --submodule=diff with .git file' ' + git diff --submodule=diff HEAD^ >actual && + cat >expected <<-EOF && + Submodule sm1 17243c9...0000000 (submodule deleted) + Submodule sm2 0000000...a5a65c9 (new submodule) + diff --git a/sm2/foo8 b/sm2/foo8 + new file mode 100644 + index 0000000..db9916b + --- /dev/null + +++ b/sm2/foo8 + @@ -0,0 +1 @@ + +foo8 + diff --git a/sm2/foo9 b/sm2/foo9 + new file mode 100644 + index 0000000..9c3b4f6 + --- /dev/null + +++ b/sm2/foo9 + @@ -0,0 +1 @@ + +foo9 + EOF + test_cmp expected actual +' + +test_done diff --git a/t/t4061-diff-indent.sh b/t/t4061-diff-indent.sh new file mode 100755 index 0000000000..556450609b --- /dev/null +++ b/t/t4061-diff-indent.sh @@ -0,0 +1,216 @@ +#!/bin/sh + +test_description='Test diff indent heuristic. + +' +. ./test-lib.sh +. "$TEST_DIRECTORY"/diff-lib.sh + +# Compare two diff outputs. Ignore "index" lines, because we don't +# care about SHA-1s or file modes. +compare_diff () { + sed -e "/^index /d" <"$1" >.tmp-1 + sed -e "/^index /d" <"$2" >.tmp-2 + test_cmp .tmp-1 .tmp-2 && rm -f .tmp-1 .tmp-2 +} + +# Compare blame output using the expectation for a diff as reference. +# Only look for the lines coming from non-boundary commits. +compare_blame () { + sed -n -e "1,4d" -e "s/^\+//p" <"$1" >.tmp-1 + sed -ne "s/^[^^][^)]*) *//p" <"$2" >.tmp-2 + test_cmp .tmp-1 .tmp-2 && rm -f .tmp-1 .tmp-2 +} + +test_expect_success 'prepare' ' + cat <<-\EOF >spaces.txt && + 1 + 2 + a + + b + 3 + 4 + EOF + + cat <<-\EOF >functions.c && + 1 + 2 + /* function */ + foo() { + foo + } + + 3 + 4 + EOF + + git add spaces.txt functions.c && + test_tick && + git commit -m initial && + git branch old && + + cat <<-\EOF >spaces.txt && + 1 + 2 + a + + b + a + + b + 3 + 4 + EOF + + cat <<-\EOF >functions.c && + 1 + 2 + /* function */ + bar() { + foo + } + + /* function */ + foo() { + foo + } + + 3 + 4 + EOF + + git add spaces.txt functions.c && + test_tick && + git commit -m initial && + git branch new && + + tr "_" " " <<-\EOF >spaces-expect && + diff --git a/spaces.txt b/spaces.txt + --- a/spaces.txt + +++ b/spaces.txt + @@ -3,5 +3,8 @@ + a + _ + b + +a + + + +b + 3 + 4 + EOF + + tr "_" " " <<-\EOF >spaces-compacted-expect && + diff --git a/spaces.txt b/spaces.txt + --- a/spaces.txt + +++ b/spaces.txt + @@ -2,6 +2,9 @@ + 2 + a + _ + +b + +a + + + b + 3 + 4 + EOF + + tr "_" " " <<-\EOF >functions-expect && + diff --git a/functions.c b/functions.c + --- a/functions.c + +++ b/functions.c + @@ -1,6 +1,11 @@ + 1 + 2 + /* function */ + +bar() { + + foo + +} + + + +/* function */ + foo() { + foo + } + EOF + + tr "_" " " <<-\EOF >functions-compacted-expect + diff --git a/functions.c b/functions.c + --- a/functions.c + +++ b/functions.c + @@ -1,5 +1,10 @@ + 1 + 2 + +/* function */ + +bar() { + + foo + +} + + + /* function */ + foo() { + foo + EOF +' + +test_expect_success 'diff: ugly spaces' ' + git diff old new -- spaces.txt >out && + compare_diff spaces-expect out +' + +test_expect_success 'diff: nice spaces with --indent-heuristic' ' + git diff --indent-heuristic old new -- spaces.txt >out-compacted && + compare_diff spaces-compacted-expect out-compacted +' + +test_expect_success 'diff: nice spaces with diff.indentHeuristic' ' + git -c diff.indentHeuristic=true diff old new -- spaces.txt >out-compacted2 && + compare_diff spaces-compacted-expect out-compacted2 +' + +test_expect_success 'diff: --no-indent-heuristic overrides config' ' + git -c diff.indentHeuristic=true diff --no-indent-heuristic old new -- spaces.txt >out2 && + compare_diff spaces-expect out2 +' + +test_expect_success 'diff: --indent-heuristic with --patience' ' + git diff --indent-heuristic --patience old new -- spaces.txt >out-compacted3 && + compare_diff spaces-compacted-expect out-compacted3 +' + +test_expect_success 'diff: --indent-heuristic with --histogram' ' + git diff --indent-heuristic --histogram old new -- spaces.txt >out-compacted4 && + compare_diff spaces-compacted-expect out-compacted4 +' + +test_expect_success 'diff: ugly functions' ' + git diff old new -- functions.c >out && + compare_diff functions-expect out +' + +test_expect_success 'diff: nice functions with --indent-heuristic' ' + git diff --indent-heuristic old new -- functions.c >out-compacted && + compare_diff functions-compacted-expect out-compacted +' + +test_expect_success 'blame: ugly spaces' ' + git blame old..new -- spaces.txt >out-blame && + compare_blame spaces-expect out-blame +' + +test_expect_success 'blame: nice spaces with --indent-heuristic' ' + git blame --indent-heuristic old..new -- spaces.txt >out-blame-compacted && + compare_blame spaces-compacted-expect out-blame-compacted +' + +test_expect_success 'blame: nice spaces with diff.indentHeuristic' ' + git -c diff.indentHeuristic=true blame old..new -- spaces.txt >out-blame-compacted2 && + compare_blame spaces-compacted-expect out-blame-compacted2 +' + +test_expect_success 'blame: --no-indent-heuristic overrides config' ' + git -c diff.indentHeuristic=true blame --no-indent-heuristic old..new -- spaces.txt >out-blame2 && + git blame old..new -- spaces.txt >out-blame && + compare_blame spaces-expect out-blame2 +' + +test_done diff --git a/t/t4062-diff-pickaxe.sh b/t/t4062-diff-pickaxe.sh new file mode 100755 index 0000000000..f0bf50bda7 --- /dev/null +++ b/t/t4062-diff-pickaxe.sh @@ -0,0 +1,22 @@ +#!/bin/sh +# +# Copyright (c) 2016 Johannes Schindelin +# + +test_description='Pickaxe options' + +. ./test-lib.sh + +test_expect_success setup ' + test_commit initial && + printf "%04096d" 0 >4096-zeroes.txt && + git add 4096-zeroes.txt && + test_tick && + git commit -m "A 4k file" +' +test_expect_success '-G matches' ' + git diff --name-only -G "^0{4096}$" HEAD^ >out && + test 4096-zeroes.txt = "$(cat out)" +' + +test_done diff --git a/t/t4130-apply-criss-cross-rename.sh b/t/t4130-apply-criss-cross-rename.sh index d173acde0f..f8a313bcb9 100755 --- a/t/t4130-apply-criss-cross-rename.sh +++ b/t/t4130-apply-criss-cross-rename.sh @@ -13,9 +13,13 @@ create_file() { } test_expect_success 'setup' ' - create_file file1 "File1 contents" && - create_file file2 "File2 contents" && - create_file file3 "File3 contents" && + # Ensure that file sizes are different, because on Windows + # lstat() does not discover inode numbers, and we need + # other properties to discover swapped files + # (mtime is not always different, either). + create_file file1 "some content" && + create_file file2 "some other content" && + create_file file3 "again something else" && git add file1 file2 file3 && git commit -m 1 ' diff --git a/t/t4135-apply-weird-filenames.sh b/t/t4135-apply-weird-filenames.sh index bf5dc57286..27cb0009fb 100755 --- a/t/t4135-apply-weird-filenames.sh +++ b/t/t4135-apply-weird-filenames.sh @@ -19,7 +19,8 @@ test_expect_success 'setup' ' test_when_finished "rm -f \"tab embedded.txt\"" && test_when_finished "rm -f '\''\"quoteembedded\".txt'\''" && - if touch -- "tab embedded.txt" '\''"quoteembedded".txt'\'' + if test_have_prereq !MINGW && + touch -- "tab embedded.txt" '\''"quoteembedded".txt'\'' then test_set_prereq FUNNYNAMES fi diff --git a/t/t4136-apply-check.sh b/t/t4136-apply-check.sh index a321f7c245..4b0a374b63 100755 --- a/t/t4136-apply-check.sh +++ b/t/t4136-apply-check.sh @@ -16,4 +16,17 @@ test_expect_success 'apply --check exits non-zero with unrecognized input' ' EOF ' +test_expect_success 'apply exits non-zero with no-op patch' ' + cat >input <<-\EOF && + diff --get a/1 b/1 + index 6696ea4..606eddd 100644 + --- a/1 + +++ b/1 + @@ -1,1 +1,1 @@ + 1 + EOF + test_must_fail git apply --stat input && + test_must_fail git apply --check input +' + test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 306e6f39ac..89a5bacac5 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -67,6 +67,19 @@ test_expect_success 'setup: messages' ' EOF + cat >scissors-msg <<-\EOF && + Test git-am with scissors line + + This line should be included in the commit message. + EOF + + cat - scissors-msg >no-scissors-msg <<-\EOF && + This line should not be included in the commit message with --scissors enabled. + + - - >8 - - remove everything above this line - - >8 - - + + EOF + signoff="Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" ' @@ -104,6 +117,52 @@ test_expect_success setup ' echo "X-Fake-Field: Line Three" && git format-patch --stdout first | sed -e "1d" } > patch1-ws.eml && + { + sed -ne "1p" msg && + echo && + echo "From: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>" && + echo "Date: $GIT_AUTHOR_DATE" && + echo && + sed -e "1,2d" msg && + echo && + echo "Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" && + echo "---" && + git diff-tree --no-commit-id --stat -p second + } >patch1-stgit.eml && + mkdir stgit-series && + cp patch1-stgit.eml stgit-series/patch && + { + echo "# This series applies on GIT commit $(git rev-parse first)" && + echo "patch" + } >stgit-series/series && + { + echo "# HG changeset patch" && + echo "# User $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>" && + echo "# Date $test_tick 25200" && + echo "# $(git show --pretty="%aD" -s second)" && + echo "# Node ID $_z40" && + echo "# Parent $_z40" && + cat msg && + echo && + echo "Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" && + echo && + git diff-tree --no-commit-id -p second + } >patch1-hg.eml && + + + echo scissors-file >scissors-file && + git add scissors-file && + git commit -F scissors-msg && + git tag scissors && + git format-patch --stdout scissors^ >scissors-patch.eml && + git reset --hard HEAD^ && + + echo no-scissors-file >no-scissors-file && + git add no-scissors-file && + git commit -F no-scissors-msg && + git tag no-scissors && + git format-patch --stdout no-scissors^ >no-scissors-patch.eml && + git reset --hard HEAD^ && sed -n -e "3,\$p" msg >file && git add file && @@ -154,6 +213,18 @@ test_expect_success 'am applies patch correctly' ' test "$(git rev-parse second^)" = "$(git rev-parse HEAD^)" ' +test_expect_success 'am fails if index is dirty' ' + test_when_finished "rm -f dirtyfile" && + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + echo dirtyfile >dirtyfile && + git add dirtyfile && + test_must_fail git am patch1 && + test_path_is_dir .git/rebase-apply && + test_cmp_rev first HEAD +' + test_expect_success 'am applies patch e-mail not in a mbox' ' rm -fr .git/rebase-apply && git reset --hard && @@ -187,6 +258,183 @@ test_expect_success 'am applies patch e-mail with preceding whitespace' ' test "$(git rev-parse second^)" = "$(git rev-parse HEAD^)" ' +test_expect_success 'am applies stgit patch' ' + rm -fr .git/rebase-apply && + git checkout -f first && + git am patch1-stgit.eml && + test_path_is_missing .git/rebase-apply && + git diff --exit-code second && + test_cmp_rev second HEAD && + test_cmp_rev second^ HEAD^ +' + +test_expect_success 'am --patch-format=stgit applies stgit patch' ' + rm -fr .git/rebase-apply && + git checkout -f first && + git am --patch-format=stgit <patch1-stgit.eml && + test_path_is_missing .git/rebase-apply && + git diff --exit-code second && + test_cmp_rev second HEAD && + test_cmp_rev second^ HEAD^ +' + +test_expect_success 'am applies stgit series' ' + rm -fr .git/rebase-apply && + git checkout -f first && + git am stgit-series/series && + test_path_is_missing .git/rebase-apply && + git diff --exit-code second && + test_cmp_rev second HEAD && + test_cmp_rev second^ HEAD^ +' + +test_expect_success 'am applies hg patch' ' + rm -fr .git/rebase-apply && + git checkout -f first && + git am patch1-hg.eml && + test_path_is_missing .git/rebase-apply && + git diff --exit-code second && + test_cmp_rev second HEAD && + test_cmp_rev second^ HEAD^ +' + +test_expect_success 'am --patch-format=hg applies hg patch' ' + rm -fr .git/rebase-apply && + git checkout -f first && + git am --patch-format=hg <patch1-hg.eml && + test_path_is_missing .git/rebase-apply && + git diff --exit-code second && + test_cmp_rev second HEAD && + test_cmp_rev second^ HEAD^ +' + +test_expect_success 'am with applypatch-msg hook' ' + test_when_finished "rm -f .git/hooks/applypatch-msg" && + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + mkdir -p .git/hooks && + write_script .git/hooks/applypatch-msg <<-\EOF && + cat "$1" >actual-msg && + echo hook-message >"$1" + EOF + git am patch1 && + test_path_is_missing .git/rebase-apply && + git diff --exit-code second && + echo hook-message >expected && + git log -1 --format=format:%B >actual && + test_cmp expected actual && + git log -1 --format=format:%B second >expected && + test_cmp expected actual-msg +' + +test_expect_success 'am with failing applypatch-msg hook' ' + test_when_finished "rm -f .git/hooks/applypatch-msg" && + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + mkdir -p .git/hooks && + write_script .git/hooks/applypatch-msg <<-\EOF && + exit 1 + EOF + test_must_fail git am patch1 && + test_path_is_dir .git/rebase-apply && + git diff --exit-code first && + test_cmp_rev first HEAD +' + +test_expect_success 'am with pre-applypatch hook' ' + test_when_finished "rm -f .git/hooks/pre-applypatch" && + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + mkdir -p .git/hooks && + write_script .git/hooks/pre-applypatch <<-\EOF && + git diff first >diff.actual + exit 0 + EOF + git am patch1 && + test_path_is_missing .git/rebase-apply && + git diff --exit-code second && + test_cmp_rev second HEAD && + git diff first..second >diff.expected && + test_cmp diff.expected diff.actual +' + +test_expect_success 'am with failing pre-applypatch hook' ' + test_when_finished "rm -f .git/hooks/pre-applypatch" && + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + mkdir -p .git/hooks && + write_script .git/hooks/pre-applypatch <<-\EOF && + exit 1 + EOF + test_must_fail git am patch1 && + test_path_is_dir .git/rebase-apply && + git diff --exit-code second && + test_cmp_rev first HEAD +' + +test_expect_success 'am with post-applypatch hook' ' + test_when_finished "rm -f .git/hooks/post-applypatch" && + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + mkdir -p .git/hooks && + write_script .git/hooks/post-applypatch <<-\EOF && + git rev-parse HEAD >head.actual + git diff second >diff.actual + exit 0 + EOF + git am patch1 && + test_path_is_missing .git/rebase-apply && + test_cmp_rev second HEAD && + git rev-parse second >head.expected && + test_cmp head.expected head.actual && + git diff second >diff.expected && + test_cmp diff.expected diff.actual +' + +test_expect_success 'am with failing post-applypatch hook' ' + test_when_finished "rm -f .git/hooks/post-applypatch" && + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + mkdir -p .git/hooks && + write_script .git/hooks/post-applypatch <<-\EOF && + git rev-parse HEAD >head.actual + exit 1 + EOF + git am patch1 && + test_path_is_missing .git/rebase-apply && + git diff --exit-code second && + test_cmp_rev second HEAD && + git rev-parse second >head.expected && + test_cmp head.expected head.actual +' + +test_expect_success 'am --scissors cuts the message at the scissors line' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout second && + git am --scissors scissors-patch.eml && + test_path_is_missing .git/rebase-apply && + git diff --exit-code scissors && + test_cmp_rev scissors HEAD +' + +test_expect_success 'am --no-scissors overrides mailinfo.scissors' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout second && + test_config mailinfo.scissors true && + git am --no-scissors no-scissors-patch.eml && + test_path_is_missing .git/rebase-apply && + git diff --exit-code no-scissors && + test_cmp_rev no-scissors HEAD +' + test_expect_success 'setup: new author and committer' ' GIT_AUTHOR_NAME="Another Thor" && GIT_AUTHOR_EMAIL="a.thor@example.com" && @@ -274,15 +522,21 @@ test_expect_success 'am --keep-non-patch really keeps the non-patch part' ' grep "^\[foo\] third" actual ' -test_expect_success 'am -3 falls back to 3-way merge' ' +test_expect_success 'setup am -3' ' rm -fr .git/rebase-apply && git reset --hard && - git checkout -b lorem2 master2 && + git checkout -b base3way master2 && sed -n -e "3,\$p" msg >file && head -n 9 msg >>file && git add file && test_tick && - git commit -m "copied stuff" && + git commit -m "copied stuff" +' + +test_expect_success 'am -3 falls back to 3-way merge' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout -b lorem2 base3way && git am -3 lorem-move.patch && test_path_is_missing .git/rebase-apply && git diff --exit-code lorem @@ -291,17 +545,31 @@ test_expect_success 'am -3 falls back to 3-way merge' ' test_expect_success 'am -3 -p0 can read --no-prefix patch' ' rm -fr .git/rebase-apply && git reset --hard && - git checkout -b lorem3 master2 && - sed -n -e "3,\$p" msg >file && - head -n 9 msg >>file && - git add file && - test_tick && - git commit -m "copied stuff" && + git checkout -b lorem3 base3way && git am -3 -p0 lorem-zero.patch && test_path_is_missing .git/rebase-apply && git diff --exit-code lorem ' +test_expect_success 'am with config am.threeWay falls back to 3-way merge' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout -b lorem4 base3way && + test_config am.threeWay 1 && + git am lorem-move.patch && + test_path_is_missing .git/rebase-apply && + git diff --exit-code lorem +' + +test_expect_success 'am with config am.threeWay overridden by --no-3way' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout -b lorem5 base3way && + test_config am.threeWay 1 && + test_must_fail git am --no-3way lorem-move.patch && + test_path_is_dir .git/rebase-apply +' + test_expect_success 'am can rename a file' ' grep "^rename from" rename.patch && rm -fr .git/rebase-apply && @@ -338,12 +606,7 @@ test_expect_success 'am -3 can rename a file after falling back to 3-way merge' test_expect_success 'am -3 -q is quiet' ' rm -fr .git/rebase-apply && git checkout -f lorem2 && - git reset master2 --hard && - sed -n -e "3,\$p" msg >file && - head -n 9 msg >>file && - git add file && - test_tick && - git commit -m "copied stuff" && + git reset base3way --hard && git am -3 -q lorem-move.patch >output.out 2>&1 && ! test -s output.out ' @@ -370,6 +633,20 @@ test_expect_success 'am --abort removes a stray directory' ' test_path_is_missing .git/rebase-apply ' +test_expect_success 'am refuses patches when paused' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout lorem2^^ && + + test_must_fail git am lorem-move.patch && + test_path_is_dir .git/rebase-apply && + test_cmp_rev lorem2^^ HEAD && + + test_must_fail git am <lorem-move.patch && + test_path_is_dir .git/rebase-apply && + test_cmp_rev lorem2^^ HEAD +' + test_expect_success 'am --resolved works' ' echo goodbye >expected && rm -fr .git/rebase-apply && @@ -384,6 +661,31 @@ test_expect_success 'am --resolved works' ' test_cmp expected another ' +test_expect_success 'am --resolved fails if index has no changes' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout lorem2^^ && + test_must_fail git am lorem-move.patch && + test_path_is_dir .git/rebase-apply && + test_cmp_rev lorem2^^ HEAD && + test_must_fail git am --resolved && + test_path_is_dir .git/rebase-apply && + test_cmp_rev lorem2^^ HEAD +' + +test_expect_success 'am --resolved fails if index has unmerged entries' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout second && + test_must_fail git am -3 lorem-move.patch && + test_path_is_dir .git/rebase-apply && + test_cmp_rev second HEAD && + test_must_fail git am --resolved >err && + test_path_is_dir .git/rebase-apply && + test_cmp_rev second HEAD && + test_i18ngrep "still have unmerged paths" err +' + test_expect_success 'am takes patches from a Pine mailbox' ' rm -fr .git/rebase-apply && git reset --hard && @@ -548,6 +850,18 @@ test_expect_success 'am --message-id really adds the message id' ' test_cmp expected actual ' +test_expect_success 'am.messageid really adds the message id' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout HEAD^ && + test_config am.messageid true && + git am patch1.eml && + test_path_is_missing .git/rebase-apply && + git cat-file commit HEAD | tail -n1 >actual && + grep Message-Id patch1.eml >expected && + test_cmp expected actual +' + test_expect_success 'am --message-id -s signs off after the message id' ' rm -fr .git/rebase-apply && git reset --hard && @@ -559,4 +873,131 @@ test_expect_success 'am --message-id -s signs off after the message id' ' test_cmp expected actual ' +test_expect_success 'am -3 works with rerere' ' + rm -fr .git/rebase-apply && + git reset --hard && + + # make patches one->two and two->three... + test_commit one file && + test_commit two file && + test_commit three file && + git format-patch -2 --stdout >seq.patch && + + # and create a situation that conflicts... + git reset --hard one && + test_commit other file && + + # enable rerere... + test_config rerere.enabled true && + test_when_finished "rm -rf .git/rr-cache" && + + # ...and apply. Our resolution is to skip the first + # patch, and the rerere the second one. + test_must_fail git am -3 seq.patch && + test_must_fail git am --skip && + echo resolved >file && + git add file && + git am --resolved && + + # now apply again, and confirm that rerere engaged (we still + # expect failure from am because rerere does not auto-commit + # for us). + git reset --hard other && + test_must_fail git am -3 seq.patch && + test_must_fail git am --skip && + echo resolved >expect && + test_cmp expect file +' + +test_expect_success 'am -s unexpected trailer block' ' + rm -fr .git/rebase-apply && + git reset --hard && + echo signed >file && + git add file && + cat >msg <<-EOF && + subject here + + Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> + [jc: tweaked log message] + Signed-off-by: J C H <j@c.h> + EOF + git commit -F msg && + git cat-file commit HEAD | sed -e '1,/^$/d' >original && + git format-patch --stdout -1 >patch && + + git reset --hard HEAD^ && + git am -s patch && + ( + cat original && + echo "Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" + ) >expect && + git cat-file commit HEAD | sed -e '1,/^$/d' >actual && + test_cmp expect actual && + + cat >msg <<-\EOF && + subject here + + We make sure that there is a blank line between the log + message proper and Signed-off-by: line added. + EOF + git reset HEAD^ && + git commit -F msg file && + git cat-file commit HEAD | sed -e '1,/^$/d' >original && + git format-patch --stdout -1 >patch && + + git reset --hard HEAD^ && + git am -s patch && + + ( + cat original && + echo && + echo "Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" + ) >expect && + git cat-file commit HEAD | sed -e '1,/^$/d' >actual && + test_cmp expect actual +' + +test_expect_success 'am --patch-format=mboxrd handles mboxrd' ' + rm -fr .git/rebase-apply && + git checkout -f first && + echo mboxrd >>file && + git add file && + cat >msg <<-\INPUT_END && + mboxrd should escape the body + + From could trip up a loose mbox parser + >From extra escape for reversibility + INPUT_END + git commit -F msg && + git format-patch --pretty=mboxrd --stdout -1 >mboxrd1 && + grep "^>From could trip up a loose mbox parser" mboxrd1 && + git checkout -f first && + git am --patch-format=mboxrd mboxrd1 && + git cat-file commit HEAD | tail -n4 >out && + test_cmp msg out +' + +test_expect_success 'am works with multi-line in-body headers' ' + FORTY="String that has a length of more than forty characters" && + LONG="$FORTY $FORTY" && + rm -fr .git/rebase-apply && + git checkout -f first && + echo one >> file && + git commit -am "$LONG" --author="$LONG <long@example.com>" && + git format-patch --stdout -1 >patch && + # bump from, date, and subject down to in-body header + perl -lpe " + if (/^From:/) { + print \"From: x <x\@example.com>\"; + print \"Date: Sat, 1 Jan 2000 00:00:00 +0000\"; + print \"Subject: x\n\"; + } + " patch >msg && + git checkout HEAD^ && + git am msg && + # Ensure that the author and full message are present + git cat-file commit HEAD | grep "^author.*long@example.com" && + git cat-file commit HEAD | grep "^$LONG" +' + test_done diff --git a/t/t4151-am-abort.sh b/t/t4151-am-abort.sh index 8d90634ab8..9473c2779e 100755 --- a/t/t4151-am-abort.sh +++ b/t/t4151-am-abort.sh @@ -14,6 +14,7 @@ test_expect_success setup ' git add file-1 file-2 && git commit -m initial && git tag initial && + git format-patch --stdout --root initial >initial.patch && for i in 2 3 4 5 6 do echo $i >>file-1 && @@ -63,6 +64,28 @@ do done +test_expect_success 'am -3 --skip removes otherfile-4' ' + git reset --hard initial && + test_must_fail git am -3 0003-*.patch && + test 3 -eq $(git ls-files -u | wc -l) && + test 4 = "$(cat otherfile-4)" && + git am --skip && + test_cmp_rev initial HEAD && + test -z "$(git ls-files -u)" && + test_path_is_missing otherfile-4 +' + +test_expect_success 'am -3 --abort removes otherfile-4' ' + git reset --hard initial && + test_must_fail git am -3 0003-*.patch && + test 3 -eq $(git ls-files -u | wc -l) && + test 4 = "$(cat otherfile-4)" && + git am --abort && + test_cmp_rev initial HEAD && + test -z "$(git ls-files -u)" && + test_path_is_missing otherfile-4 +' + test_expect_success 'am --abort will keep the local commits intact' ' test_must_fail git am 0004-*.patch && test_commit unrelated && @@ -72,4 +95,101 @@ test_expect_success 'am --abort will keep the local commits intact' ' test_cmp expect actual ' +test_expect_success 'am --abort will keep dirty index intact' ' + git reset --hard initial && + echo dirtyfile >dirtyfile && + cp dirtyfile dirtyfile.expected && + git add dirtyfile && + test_must_fail git am 0001-*.patch && + test_cmp_rev initial HEAD && + test_path_is_file dirtyfile && + test_cmp dirtyfile.expected dirtyfile && + git am --abort && + test_cmp_rev initial HEAD && + test_path_is_file dirtyfile && + test_cmp dirtyfile.expected dirtyfile +' + +test_expect_success 'am -3 stops on conflict on unborn branch' ' + git checkout -f --orphan orphan && + git reset && + rm -f otherfile-4 && + test_must_fail git am -3 0003-*.patch && + test 2 -eq $(git ls-files -u | wc -l) && + test 4 = "$(cat otherfile-4)" +' + +test_expect_success 'am -3 --skip clears index on unborn branch' ' + test_path_is_dir .git/rebase-apply && + echo tmpfile >tmpfile && + git add tmpfile && + git am --skip && + test -z "$(git ls-files)" && + test_path_is_missing otherfile-4 && + test_path_is_missing tmpfile +' + +test_expect_success 'am -3 --abort removes otherfile-4 on unborn branch' ' + git checkout -f --orphan orphan && + git reset && + rm -f otherfile-4 file-1 && + test_must_fail git am -3 0003-*.patch && + test 2 -eq $(git ls-files -u | wc -l) && + test 4 = "$(cat otherfile-4)" && + git am --abort && + test -z "$(git ls-files -u)" && + test_path_is_missing otherfile-4 +' + +test_expect_success 'am -3 --abort on unborn branch removes applied commits' ' + git checkout -f --orphan orphan && + git reset && + rm -f otherfile-4 otherfile-2 file-1 file-2 && + test_must_fail git am -3 initial.patch 0003-*.patch && + test 3 -eq $(git ls-files -u | wc -l) && + test 4 = "$(cat otherfile-4)" && + git am --abort && + test -z "$(git ls-files -u)" && + test_path_is_missing otherfile-4 && + test_path_is_missing file-1 && + test_path_is_missing file-2 && + test 0 -eq $(git log --oneline 2>/dev/null | wc -l) && + test refs/heads/orphan = "$(git symbolic-ref HEAD)" +' + +test_expect_success 'am --abort on unborn branch will keep local commits intact' ' + git checkout -f --orphan orphan && + git reset && + test_must_fail git am 0004-*.patch && + test_commit unrelated2 && + git rev-parse HEAD >expect && + git am --abort && + git rev-parse HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'am --skip leaves index stat info alone' ' + git checkout -f --orphan skip-stat-info && + git reset && + test_commit skip-should-be-untouched && + test-chmtime =0 skip-should-be-untouched.t && + git update-index --refresh && + git diff-files --exit-code --quiet && + test_must_fail git am 0001-*.patch && + git am --skip && + git diff-files --exit-code --quiet +' + +test_expect_success 'am --abort leaves index stat info alone' ' + git checkout -f --orphan abort-stat-info && + git reset && + test_commit abort-should-be-untouched && + test-chmtime =0 abort-should-be-untouched.t && + git update-index --refresh && + git diff-files --exit-code --quiet && + test_must_fail git am 0001-*.patch && + git am --abort && + git diff-files --exit-code --quiet +' + test_done diff --git a/t/t4153-am-resume-override-opts.sh b/t/t4153-am-resume-override-opts.sh new file mode 100755 index 0000000000..8ea22d1bcb --- /dev/null +++ b/t/t4153-am-resume-override-opts.sh @@ -0,0 +1,102 @@ +#!/bin/sh + +test_description='git-am command-line options override saved options' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-terminal.sh + +format_patch () { + git format-patch --stdout -1 "$1" >"$1".eml +} + +test_expect_success 'setup' ' + test_commit initial file && + test_commit first file && + + git checkout initial && + git mv file file2 && + test_tick && + git commit -m renamed-file && + git tag renamed-file && + + git checkout -b side initial && + test_commit side1 file && + test_commit side2 file && + + format_patch side1 && + format_patch side2 +' + +test_expect_success TTY '--3way overrides --no-3way' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout renamed-file && + + # Applying side1 will fail as the file has been renamed. + test_must_fail git am --no-3way side[12].eml && + test_path_is_dir .git/rebase-apply && + test_cmp_rev renamed-file HEAD && + test -z "$(git ls-files -u)" && + + # Applying side1 with am --3way will succeed due to the threeway-merge. + # Applying side2 will fail as --3way does not apply to it. + test_must_fail test_terminal git am --3way </dev/zero && + test_path_is_dir .git/rebase-apply && + test side1 = "$(cat file2)" +' + +test_expect_success '--no-quiet overrides --quiet' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + + # Applying side1 will be quiet. + test_must_fail git am --quiet side[123].eml >out && + test_path_is_dir .git/rebase-apply && + test_i18ngrep ! "^Applying: " out && + echo side1 >file && + git add file && + + # Applying side1 will not be quiet. + # Applying side2 will be quiet. + git am --no-quiet --continue >out && + echo "Applying: side1" >expected && + test_i18ncmp expected out +' + +test_expect_success '--signoff overrides --no-signoff' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + + test_must_fail git am --no-signoff side[12].eml && + test_path_is_dir .git/rebase-apply && + echo side1 >file && + git add file && + git am --signoff --continue && + + # Applied side1 will be signed off + echo "Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" >expected && + git cat-file commit HEAD^ | grep "Signed-off-by:" >actual && + test_cmp expected actual && + + # Applied side2 will not be signed off + test $(git cat-file commit HEAD | grep -c "Signed-off-by:") -eq 0 +' + +test_expect_success TTY '--reject overrides --no-reject' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout first && + rm -f file.rej && + + test_must_fail git am --no-reject side1.eml && + test_path_is_dir .git/rebase-apply && + test_path_is_missing file.rej && + + test_must_fail test_terminal git am --reject </dev/zero && + test_path_is_dir .git/rebase-apply && + test_path_is_file file.rej +' + +test_done diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh index ed9c91e25b..1a080e7823 100755 --- a/t/t4200-rerere.sh +++ b/t/t4200-rerere.sh @@ -184,12 +184,27 @@ test_expect_success 'rerere updates postimage timestamp' ' ' test_expect_success 'rerere clear' ' - rm $rr/postimage && + mv $rr/postimage .git/post-saved && echo "$sha1 a1" | perl -pe "y/\012/\000/" >.git/MERGE_RR && git rerere clear && ! test -d $rr ' +test_expect_success 'leftover directory' ' + git reset --hard && + mkdir -p $rr && + test_must_fail git merge first && + test -f $rr/preimage +' + +test_expect_success 'missing preimage' ' + git reset --hard && + mkdir -p $rr && + cp .git/post-saved $rr/postimage && + test_must_fail git merge first && + test -f $rr/preimage +' + test_expect_success 'set up for garbage collection tests' ' mkdir -p $rr && echo Hello >$rr/preimage && @@ -391,4 +406,157 @@ test_expect_success 'rerere -h' ' test_i18ngrep [Uu]sage help ' +concat_insert () { + last=$1 + shift + cat early && printf "%s\n" "$@" && cat late "$last" +} + +count_pre_post () { + find .git/rr-cache/ -type f -name "preimage*" >actual && + test_line_count = "$1" actual && + find .git/rr-cache/ -type f -name "postimage*" >actual && + test_line_count = "$2" actual +} + +test_expect_success 'rerere gc' ' + find .git/rr-cache -type f >original && + xargs test-chmtime -172800 <original && + + git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && + find .git/rr-cache -type f >actual && + test_cmp original actual && + + git -c gc.rerereresolved=5 -c gc.rerereunresolved=0 rerere gc && + find .git/rr-cache -type f >actual && + test_cmp original actual && + + git -c gc.rerereresolved=0 -c gc.rerereunresolved=0 rerere gc && + find .git/rr-cache -type f >actual && + >expect && + test_cmp expect actual +' + +merge_conflict_resolve () { + git reset --hard && + test_must_fail git merge six.1 && + # Resolution is to replace 7 with 6.1 and 6.2 (i.e. take both) + concat_insert short 6.1 6.2 >file1 && + concat_insert long 6.1 6.2 >file2 +} + +test_expect_success 'multiple identical conflicts' ' + git reset --hard && + + test_seq 1 6 >early && + >late && + test_seq 11 15 >short && + test_seq 111 120 >long && + concat_insert short >file1 && + concat_insert long >file2 && + git add file1 file2 && + git commit -m base && + git tag base && + git checkout -b six.1 && + concat_insert short 6.1 >file1 && + concat_insert long 6.1 >file2 && + git add file1 file2 && + git commit -m 6.1 && + git checkout -b six.2 HEAD^ && + concat_insert short 6.2 >file1 && + concat_insert long 6.2 >file2 && + git add file1 file2 && + git commit -m 6.2 && + + # At this point, six.1 and six.2 + # - derive from common ancestor that has two files + # 1...6 7 11..15 (file1) and 1...6 7 111..120 (file2) + # - six.1 replaces these 7s with 6.1 + # - six.2 replaces these 7s with 6.2 + + merge_conflict_resolve && + + # Check that rerere knows that file1 and file2 have conflicts + + printf "%s\n" file1 file2 >expect && + git ls-files -u | sed -e "s/^.* //" | sort -u >actual && + test_cmp expect actual && + + git rerere status | sort >actual && + test_cmp expect actual && + + git rerere remaining >actual && + test_cmp expect actual && + + count_pre_post 2 0 && + + # Pretend that the conflicts were made quite some time ago + find .git/rr-cache/ -type f | xargs test-chmtime -172800 && + + # Unresolved entries have not expired yet + git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && + count_pre_post 2 0 && + + # Unresolved entries have expired + git -c gc.rerereresolved=5 -c gc.rerereunresolved=1 rerere gc && + count_pre_post 0 0 && + + # Recreate the conflicted state + merge_conflict_resolve && + count_pre_post 2 0 && + + # Clear it + git rerere clear && + count_pre_post 0 0 && + + # Recreate the conflicted state + merge_conflict_resolve && + count_pre_post 2 0 && + + # We resolved file1 and file2 + git rerere && + >expect && + git rerere remaining >actual && + test_cmp expect actual && + + # We must have recorded both of them + count_pre_post 2 2 && + + # Now we should be able to resolve them both + git reset --hard && + test_must_fail git merge six.1 && + git rerere && + + >expect && + git rerere remaining >actual && + test_cmp expect actual && + + concat_insert short 6.1 6.2 >file1.expect && + concat_insert long 6.1 6.2 >file2.expect && + test_cmp file1.expect file1 && + test_cmp file2.expect file2 && + + # Forget resolution for file2 + git rerere forget file2 && + echo file2 >expect && + git rerere status >actual && + test_cmp expect actual && + count_pre_post 2 1 && + + # file2 already has correct resolution, so record it again + git rerere && + + # Pretend that the resolutions are old again + find .git/rr-cache/ -type f | xargs test-chmtime -172800 && + + # Resolved entries have not expired yet + git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && + + count_pre_post 2 2 && + + # Resolved entries have expired + git -c gc.rerereresolved=1 -c gc.rerereunresolved=5 rerere gc && + count_pre_post 0 0 +' + test_done diff --git a/t/t4201-shortlog.sh b/t/t4201-shortlog.sh index 7600a3e3e8..9df054bf05 100755 --- a/t/t4201-shortlog.sh +++ b/t/t4201-shortlog.sh @@ -115,7 +115,13 @@ EOF ' test_expect_success !MINGW 'shortlog from non-git directory' ' - git log HEAD >log && + git log --no-expand-tabs HEAD >log && + GIT_DIR=non-existing git shortlog -w <log >out && + test_cmp expect out +' + +test_expect_success !MINGW 'shortlog can read --format=raw output' ' + git log --format=raw HEAD >log && GIT_DIR=non-existing git shortlog -w <log >out && test_cmp expect out ' @@ -172,26 +178,35 @@ test_expect_success !MINGW 'shortlog encoding' ' git shortlog HEAD~2.. > out && test_cmp expect out' -test_expect_success 'shortlog ignores commits with missing authors' ' - git commit --allow-empty -m normal && - git commit --allow-empty -m soon-to-be-broken && - git cat-file commit HEAD >commit.tmp && - sed "/^author/d" commit.tmp >broken.tmp && - commit=$(git hash-object -w -t commit --stdin <broken.tmp) && - git update-ref HEAD $commit && - cat >expect <<-\EOF && - A U Thor (1): - normal +test_expect_success 'shortlog with revision pseudo options' ' + git shortlog --all && + git shortlog --branches && + git shortlog --exclude=refs/heads/m* --all +' +test_expect_success 'shortlog with --output=<file>' ' + git shortlog --output=shortlog -1 master >output && + test ! -s output && + test_line_count = 3 shortlog +' + +test_expect_success 'shortlog --committer (internal)' ' + git checkout --orphan side && + git commit --allow-empty -m one && + git commit --allow-empty -m two && + GIT_COMMITTER_NAME="Sin Nombre" git commit --allow-empty -m three && + + cat >expect <<-\EOF && + 2 C O Mitter + 1 Sin Nombre EOF - git shortlog HEAD~2.. >actual && + git shortlog -nsc HEAD >actual && test_cmp expect actual ' -test_expect_success 'shortlog with revision pseudo options' ' - git shortlog --all && - git shortlog --branches && - git shortlog --exclude=refs/heads/m* --all +test_expect_success 'shortlog --committer (external)' ' + git log --format=full | git shortlog -nsc >actual && + test_cmp expect actual ' test_done diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 1b2e981a00..1ccbd5948a 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -101,8 +101,8 @@ test_expect_success 'oneline' ' test_expect_success 'diff-filter=A' ' - git log --pretty="format:%s" --diff-filter=A HEAD > actual && - git log --pretty="format:%s" --diff-filter A HEAD > actual-separate && + git log --no-renames --pretty="format:%s" --diff-filter=A HEAD > actual && + git log --no-renames --pretty="format:%s" --diff-filter A HEAD > actual-separate && printf "fifth\nfourth\nthird\ninitial" > expect && test_cmp expect actual && test_cmp expect actual-separate @@ -119,7 +119,7 @@ test_expect_success 'diff-filter=M' ' test_expect_success 'diff-filter=D' ' - actual=$(git log --pretty="format:%s" --diff-filter=D HEAD) && + actual=$(git log --no-renames --pretty="format:%s" --diff-filter=D HEAD) && expect=$(echo sixth ; echo third) && verbose test "$actual" = "$expect" @@ -146,7 +146,30 @@ test_expect_success 'git log --follow' ' actual=$(git log --follow --pretty="format:%s" ichi) && expect=$(echo third ; echo second ; echo initial) && verbose test "$actual" = "$expect" +' + +test_expect_success 'git config log.follow works like --follow' ' + test_config log.follow true && + actual=$(git log --pretty="format:%s" ichi) && + expect=$(echo third ; echo second ; echo initial) && + verbose test "$actual" = "$expect" +' + +test_expect_success 'git config log.follow does not die with multiple paths' ' + test_config log.follow true && + git log --pretty="format:%s" ichi ein +' + +test_expect_success 'git config log.follow does not die with no paths' ' + test_config log.follow true && + git log -- +' +test_expect_success 'git config log.follow is overridden by --no-follow' ' + test_config log.follow true && + actual=$(git log --no-follow --pretty="format:%s" ichi) && + expect="third" && + verbose test "$actual" = "$expect" ' cat > expect << EOF @@ -165,6 +188,16 @@ test_expect_success 'git log --no-walk=sorted <commits> sorts by commit time' ' ' cat > expect << EOF +=== 804a787 sixth +=== 394ef78 fifth +=== 5d31159 fourth +EOF +test_expect_success 'git log --line-prefix="=== " --no-walk <commits> sorts by commit time' ' + git log --line-prefix="=== " --no-walk --oneline 5d31159 804a787 394ef78 > actual && + test_cmp expect actual +' + +cat > expect << EOF 5d31159 fourth 804a787 sixth 394ef78 fifth @@ -232,6 +265,20 @@ test_expect_success 'log -F -E --grep=<ere> uses ere' ' test_cmp expect actual ' +test_expect_success 'log with grep.patternType configuration' ' + >expect && + git -c grep.patterntype=fixed \ + log -1 --pretty=tformat:%s --grep=s.c.nd >actual && + test_cmp expect actual +' + +test_expect_success 'log with grep.patternType configuration and command line' ' + echo second >expect && + git -c grep.patterntype=fixed \ + log -1 --pretty=tformat:%s --basic-regexp --grep=s.c.nd >actual && + test_cmp expect actual +' + cat > expect <<EOF * Second * sixth @@ -247,6 +294,21 @@ test_expect_success 'simple log --graph' ' test_cmp expect actual ' +cat > expect <<EOF +123 * Second +123 * sixth +123 * fifth +123 * fourth +123 * third +123 * second +123 * initial +EOF + +test_expect_success 'simple log --graph --line-prefix="123 "' ' + git log --graph --line-prefix="123 " --pretty=tformat:%s >actual && + test_cmp expect actual +' + test_expect_success 'set up merge history' ' git checkout -b side HEAD~4 && test_commit side-1 1 1 && @@ -276,6 +338,27 @@ test_expect_success 'log --graph with merge' ' test_cmp expect actual ' +cat > expect <<\EOF +| | | * Merge branch 'side' +| | | |\ +| | | | * side-2 +| | | | * side-1 +| | | * | Second +| | | * | sixth +| | | * | fifth +| | | * | fourth +| | | |/ +| | | * third +| | | * second +| | | * initial +EOF + +test_expect_success 'log --graph --line-prefix="| | | " with merge' ' + git log --line-prefix="| | | " --graph --date-order --pretty=tformat:%s | + sed "s/ *\$//" >actual && + test_cmp expect actual +' + test_expect_success 'log --raw --graph -m with merge' ' git log --raw --graph --oneline -m master | head -n 500 >actual && grep "initial" actual @@ -825,7 +908,284 @@ sanitize_output () { } test_expect_success 'log --graph with diff and stats' ' - git log --graph --pretty=short --stat -p >actual && + git log --no-renames --graph --pretty=short --stat -p >actual && + sanitize_output >actual.sanitized <actual && + test_i18ncmp expect actual.sanitized +' + +cat >expect <<\EOF +*** * commit COMMIT_OBJECT_NAME +*** |\ Merge: MERGE_PARENTS +*** | | Author: A U Thor <author@example.com> +*** | | +*** | | Merge HEADS DESCRIPTION +*** | | +*** | * commit COMMIT_OBJECT_NAME +*** | | Author: A U Thor <author@example.com> +*** | | +*** | | reach +*** | | --- +*** | | reach.t | 1 + +*** | | 1 file changed, 1 insertion(+) +*** | | +*** | | diff --git a/reach.t b/reach.t +*** | | new file mode 100644 +*** | | index 0000000..10c9591 +*** | | --- /dev/null +*** | | +++ b/reach.t +*** | | @@ -0,0 +1 @@ +*** | | +reach +*** | | +*** | \ +*** *-. \ commit COMMIT_OBJECT_NAME +*** |\ \ \ Merge: MERGE_PARENTS +*** | | | | Author: A U Thor <author@example.com> +*** | | | | +*** | | | | Merge HEADS DESCRIPTION +*** | | | | +*** | | * | commit COMMIT_OBJECT_NAME +*** | | |/ Author: A U Thor <author@example.com> +*** | | | +*** | | | octopus-b +*** | | | --- +*** | | | octopus-b.t | 1 + +*** | | | 1 file changed, 1 insertion(+) +*** | | | +*** | | | diff --git a/octopus-b.t b/octopus-b.t +*** | | | new file mode 100644 +*** | | | index 0000000..d5fcad0 +*** | | | --- /dev/null +*** | | | +++ b/octopus-b.t +*** | | | @@ -0,0 +1 @@ +*** | | | +octopus-b +*** | | | +*** | * | commit COMMIT_OBJECT_NAME +*** | |/ Author: A U Thor <author@example.com> +*** | | +*** | | octopus-a +*** | | --- +*** | | octopus-a.t | 1 + +*** | | 1 file changed, 1 insertion(+) +*** | | +*** | | diff --git a/octopus-a.t b/octopus-a.t +*** | | new file mode 100644 +*** | | index 0000000..11ee015 +*** | | --- /dev/null +*** | | +++ b/octopus-a.t +*** | | @@ -0,0 +1 @@ +*** | | +octopus-a +*** | | +*** * | commit COMMIT_OBJECT_NAME +*** |/ Author: A U Thor <author@example.com> +*** | +*** | seventh +*** | --- +*** | seventh.t | 1 + +*** | 1 file changed, 1 insertion(+) +*** | +*** | diff --git a/seventh.t b/seventh.t +*** | new file mode 100644 +*** | index 0000000..9744ffc +*** | --- /dev/null +*** | +++ b/seventh.t +*** | @@ -0,0 +1 @@ +*** | +seventh +*** | +*** * commit COMMIT_OBJECT_NAME +*** |\ Merge: MERGE_PARENTS +*** | | Author: A U Thor <author@example.com> +*** | | +*** | | Merge branch 'tangle' +*** | | +*** | * commit COMMIT_OBJECT_NAME +*** | |\ Merge: MERGE_PARENTS +*** | | | Author: A U Thor <author@example.com> +*** | | | +*** | | | Merge branch 'side' (early part) into tangle +*** | | | +*** | * | commit COMMIT_OBJECT_NAME +*** | |\ \ Merge: MERGE_PARENTS +*** | | | | Author: A U Thor <author@example.com> +*** | | | | +*** | | | | Merge branch 'master' (early part) into tangle +*** | | | | +*** | * | | commit COMMIT_OBJECT_NAME +*** | | | | Author: A U Thor <author@example.com> +*** | | | | +*** | | | | tangle-a +*** | | | | --- +*** | | | | tangle-a | 1 + +*** | | | | 1 file changed, 1 insertion(+) +*** | | | | +*** | | | | diff --git a/tangle-a b/tangle-a +*** | | | | new file mode 100644 +*** | | | | index 0000000..7898192 +*** | | | | --- /dev/null +*** | | | | +++ b/tangle-a +*** | | | | @@ -0,0 +1 @@ +*** | | | | +a +*** | | | | +*** * | | | commit COMMIT_OBJECT_NAME +*** |\ \ \ \ Merge: MERGE_PARENTS +*** | | | | | Author: A U Thor <author@example.com> +*** | | | | | +*** | | | | | Merge branch 'side' +*** | | | | | +*** | * | | | commit COMMIT_OBJECT_NAME +*** | | |_|/ Author: A U Thor <author@example.com> +*** | |/| | +*** | | | | side-2 +*** | | | | --- +*** | | | | 2 | 1 + +*** | | | | 1 file changed, 1 insertion(+) +*** | | | | +*** | | | | diff --git a/2 b/2 +*** | | | | new file mode 100644 +*** | | | | index 0000000..0cfbf08 +*** | | | | --- /dev/null +*** | | | | +++ b/2 +*** | | | | @@ -0,0 +1 @@ +*** | | | | +2 +*** | | | | +*** | * | | commit COMMIT_OBJECT_NAME +*** | | | | Author: A U Thor <author@example.com> +*** | | | | +*** | | | | side-1 +*** | | | | --- +*** | | | | 1 | 1 + +*** | | | | 1 file changed, 1 insertion(+) +*** | | | | +*** | | | | diff --git a/1 b/1 +*** | | | | new file mode 100644 +*** | | | | index 0000000..d00491f +*** | | | | --- /dev/null +*** | | | | +++ b/1 +*** | | | | @@ -0,0 +1 @@ +*** | | | | +1 +*** | | | | +*** * | | | commit COMMIT_OBJECT_NAME +*** | | | | Author: A U Thor <author@example.com> +*** | | | | +*** | | | | Second +*** | | | | --- +*** | | | | one | 1 + +*** | | | | 1 file changed, 1 insertion(+) +*** | | | | +*** | | | | diff --git a/one b/one +*** | | | | new file mode 100644 +*** | | | | index 0000000..9a33383 +*** | | | | --- /dev/null +*** | | | | +++ b/one +*** | | | | @@ -0,0 +1 @@ +*** | | | | +case +*** | | | | +*** * | | | commit COMMIT_OBJECT_NAME +*** | |_|/ Author: A U Thor <author@example.com> +*** |/| | +*** | | | sixth +*** | | | --- +*** | | | a/two | 1 - +*** | | | 1 file changed, 1 deletion(-) +*** | | | +*** | | | diff --git a/a/two b/a/two +*** | | | deleted file mode 100644 +*** | | | index 9245af5..0000000 +*** | | | --- a/a/two +*** | | | +++ /dev/null +*** | | | @@ -1 +0,0 @@ +*** | | | -ni +*** | | | +*** * | | commit COMMIT_OBJECT_NAME +*** | | | Author: A U Thor <author@example.com> +*** | | | +*** | | | fifth +*** | | | --- +*** | | | a/two | 1 + +*** | | | 1 file changed, 1 insertion(+) +*** | | | +*** | | | diff --git a/a/two b/a/two +*** | | | new file mode 100644 +*** | | | index 0000000..9245af5 +*** | | | --- /dev/null +*** | | | +++ b/a/two +*** | | | @@ -0,0 +1 @@ +*** | | | +ni +*** | | | +*** * | | commit COMMIT_OBJECT_NAME +*** |/ / Author: A U Thor <author@example.com> +*** | | +*** | | fourth +*** | | --- +*** | | ein | 1 + +*** | | 1 file changed, 1 insertion(+) +*** | | +*** | | diff --git a/ein b/ein +*** | | new file mode 100644 +*** | | index 0000000..9d7e69f +*** | | --- /dev/null +*** | | +++ b/ein +*** | | @@ -0,0 +1 @@ +*** | | +ichi +*** | | +*** * | commit COMMIT_OBJECT_NAME +*** |/ Author: A U Thor <author@example.com> +*** | +*** | third +*** | --- +*** | ichi | 1 + +*** | one | 1 - +*** | 2 files changed, 1 insertion(+), 1 deletion(-) +*** | +*** | diff --git a/ichi b/ichi +*** | new file mode 100644 +*** | index 0000000..9d7e69f +*** | --- /dev/null +*** | +++ b/ichi +*** | @@ -0,0 +1 @@ +*** | +ichi +*** | diff --git a/one b/one +*** | deleted file mode 100644 +*** | index 9d7e69f..0000000 +*** | --- a/one +*** | +++ /dev/null +*** | @@ -1 +0,0 @@ +*** | -ichi +*** | +*** * commit COMMIT_OBJECT_NAME +*** | Author: A U Thor <author@example.com> +*** | +*** | second +*** | --- +*** | one | 2 +- +*** | 1 file changed, 1 insertion(+), 1 deletion(-) +*** | +*** | diff --git a/one b/one +*** | index 5626abf..9d7e69f 100644 +*** | --- a/one +*** | +++ b/one +*** | @@ -1 +1 @@ +*** | -one +*** | +ichi +*** | +*** * commit COMMIT_OBJECT_NAME +*** Author: A U Thor <author@example.com> +*** +*** initial +*** --- +*** one | 1 + +*** 1 file changed, 1 insertion(+) +*** +*** diff --git a/one b/one +*** new file mode 100644 +*** index 0000000..5626abf +*** --- /dev/null +*** +++ b/one +*** @@ -0,0 +1 @@ +*** +one +EOF + +test_expect_success 'log --line-prefix="*** " --graph with diff and stats' ' + git log --line-prefix="*** " --no-renames --graph --pretty=short --stat -p >actual && sanitize_output >actual.sanitized <actual && test_i18ncmp expect actual.sanitized ' @@ -837,12 +1197,15 @@ test_expect_success 'dotdot is a parent directory' ' test_cmp expect actual ' -test_expect_success GPG 'log --graph --show-signature' ' +test_expect_success GPG 'setup signed branch' ' test_when_finished "git reset --hard && git checkout master" && git checkout -b signed master && echo foo >foo && git add foo && - git commit -S -m signed_commit && + git commit -S -m signed_commit +' + +test_expect_success GPG 'log --graph --show-signature' ' git log --graph --show-signature -n1 signed >actual && grep "^| gpg: Signature made" actual && grep "^| gpg: Good signature" actual @@ -867,8 +1230,76 @@ test_expect_success GPG 'log --graph --show-signature for merged tag' ' grep "^| | gpg: Good signature" actual ' +test_expect_success GPG '--no-show-signature overrides --show-signature' ' + git log -1 --show-signature --no-show-signature signed >actual && + ! grep "^gpg:" actual +' + +test_expect_success GPG 'log.showsignature=true behaves like --show-signature' ' + test_config log.showsignature true && + git log -1 signed >actual && + grep "gpg: Signature made" actual && + grep "gpg: Good signature" actual +' + +test_expect_success GPG '--no-show-signature overrides log.showsignature=true' ' + test_config log.showsignature true && + git log -1 --no-show-signature signed >actual && + ! grep "^gpg:" actual +' + +test_expect_success GPG '--show-signature overrides log.showsignature=false' ' + test_config log.showsignature false && + git log -1 --show-signature signed >actual && + grep "gpg: Signature made" actual && + grep "gpg: Good signature" actual +' + test_expect_success 'log --graph --no-walk is forbidden' ' test_must_fail git log --graph --no-walk ' +test_expect_success 'log diagnoses bogus HEAD' ' + git init empty && + test_must_fail git -C empty log 2>stderr && + test_i18ngrep does.not.have.any.commits stderr && + echo 1234abcd >empty/.git/refs/heads/master && + test_must_fail git -C empty log 2>stderr && + test_i18ngrep broken stderr && + echo "ref: refs/heads/invalid.lock" >empty/.git/HEAD && + test_must_fail git -C empty log 2>stderr && + test_i18ngrep broken stderr && + test_must_fail git -C empty log --default totally-bogus 2>stderr && + test_i18ngrep broken stderr +' + +test_expect_success 'set up --source tests' ' + git checkout --orphan source-a && + test_commit one && + test_commit two && + git checkout -b source-b HEAD^ && + test_commit three +' + +test_expect_success 'log --source paints branch names' ' + cat >expect <<-\EOF && + 09e12a9 source-b three + 8e393e1 source-a two + 1ac6c77 source-b one + EOF + git log --oneline --source source-a source-b >actual && + test_cmp expect actual +' + +test_expect_success 'log --source paints tag names' ' + git tag -m tagged source-tag && + cat >expect <<-\EOF && + 09e12a9 source-tag three + 8e393e1 source-a two + 1ac6c77 source-tag one + EOF + git log --oneline --source source-tag source-a >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4204-patch-id.sh b/t/t4204-patch-id.sh index baa9d3c82e..0288c17ec6 100755 --- a/t/t4204-patch-id.sh +++ b/t/t4204-patch-id.sh @@ -30,11 +30,11 @@ test_expect_success 'patch-id output is well-formed' ' #calculate patch id. Make sure output is not empty. calc_patch_id () { - name="$1" + patch_name="$1" shift git patch-id "$@" | - sed "s/ .*//" >patch-id_"$name" && - test_line_count -gt 0 patch-id_"$name" + sed "s/ .*//" >patch-id_"$patch_name" && + test_line_count -gt 0 patch-id_"$patch_name" } get_top_diff () { @@ -143,6 +143,20 @@ test_expect_success 'patch-id supports git-format-patch MIME output' ' test_cmp patch-id_master patch-id_same ' +test_expect_success 'patch-id respects config from subdir' ' + test_config patchid.stable true && + mkdir subdir && + + # copy these because test_patch_id() looks for them in + # the current directory + cp bar-then-foo foo-then-bar subdir && + + ( + cd subdir && + test_patch_id irrelevant patchid.stable=true + ) +' + cat >nonl <<\EOF diff --git i/a w/a index e69de29..2e65efe 100644 diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index 7398605e7b..21eb8c8587 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -145,253 +145,310 @@ test_expect_success 'setup more commits' ' test_expect_success 'left alignment formatting' ' git log --pretty="tformat:%<(40)%s" >actual && - qz_to_tab_space <<EOF >expected && -message two Z -message one Z -add bar Z -$(commit_msg) Z -EOF + qz_to_tab_space <<-EOF >expected && + message two Z + message one Z + add bar Z + $(commit_msg) Z + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%<(40)%s" >actual && - qz_to_tab_space <<EOF | iconv -f utf-8 -t $test_encoding >expected && -message two Z -message one Z -add bar Z -$(commit_msg) Z -EOF + qz_to_tab_space <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + message two Z + message one Z + add bar Z + $(commit_msg) Z + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting at the nth column' ' git log --pretty="tformat:%h %<|(40)%s" >actual && - qz_to_tab_space <<EOF >expected && -$head1 message two Z -$head2 message one Z -$head3 add bar Z -$head4 $(commit_msg) Z -EOF + qz_to_tab_space <<-EOF >expected && + $head1 message two Z + $head2 message one Z + $head3 add bar Z + $head4 $(commit_msg) Z + EOF + test_cmp expected actual +' + +test_expect_success 'left alignment formatting at the nth column' ' + COLUMNS=50 git log --pretty="tformat:%h %<|(-10)%s" >actual && + qz_to_tab_space <<-EOF >expected && + $head1 message two Z + $head2 message one Z + $head3 add bar Z + $head4 $(commit_msg) Z + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting at the nth column. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%h %<|(40)%s" >actual && - qz_to_tab_space <<EOF | iconv -f utf-8 -t $test_encoding >expected && -$head1 message two Z -$head2 message one Z -$head3 add bar Z -$head4 $(commit_msg) Z -EOF + qz_to_tab_space <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + $head1 message two Z + $head2 message one Z + $head3 add bar Z + $head4 $(commit_msg) Z + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting with no padding' ' git log --pretty="tformat:%<(1)%s" >actual && - cat <<EOF >expected && -message two -message one -add bar -$(commit_msg) -EOF + cat <<-EOF >expected && + message two + message one + add bar + $(commit_msg) + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting with no padding. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%<(1)%s" >actual && - cat <<EOF | iconv -f utf-8 -t $test_encoding >expected && -message two -message one -add bar -$(commit_msg) -EOF + cat <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + message two + message one + add bar + $(commit_msg) + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting with trunc' ' git log --pretty="tformat:%<(10,trunc)%s" >actual && - qz_to_tab_space <<EOF >expected && -message .. -message .. -add bar Z -initial... -EOF + qz_to_tab_space <<-\EOF >expected && + message .. + message .. + add bar Z + initial... + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting with trunc. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%<(10,trunc)%s" >actual && - qz_to_tab_space <<EOF | iconv -f utf-8 -t $test_encoding >expected && -message .. -message .. -add bar Z -initial... -EOF + qz_to_tab_space <<-\EOF | iconv -f utf-8 -t $test_encoding >expected && + message .. + message .. + add bar Z + initial... + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting with ltrunc' ' git log --pretty="tformat:%<(10,ltrunc)%s" >actual && - qz_to_tab_space <<EOF >expected && -..sage two -..sage one -add bar Z -..${sample_utf8_part}lich -EOF + qz_to_tab_space <<-EOF >expected && + ..sage two + ..sage one + add bar Z + ..${sample_utf8_part}lich + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting with ltrunc. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%<(10,ltrunc)%s" >actual && - qz_to_tab_space <<EOF | iconv -f utf-8 -t $test_encoding >expected && -..sage two -..sage one -add bar Z -..${sample_utf8_part}lich -EOF + qz_to_tab_space <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + ..sage two + ..sage one + add bar Z + ..${sample_utf8_part}lich + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting with mtrunc' ' git log --pretty="tformat:%<(10,mtrunc)%s" >actual && - qz_to_tab_space <<EOF >expected && -mess.. two -mess.. one -add bar Z -init..lich -EOF + qz_to_tab_space <<-\EOF >expected && + mess.. two + mess.. one + add bar Z + init..lich + EOF test_cmp expected actual ' test_expect_success 'left alignment formatting with mtrunc. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%<(10,mtrunc)%s" >actual && - qz_to_tab_space <<EOF | iconv -f utf-8 -t $test_encoding >expected && -mess.. two -mess.. one -add bar Z -init..lich -EOF + qz_to_tab_space <<-\EOF | iconv -f utf-8 -t $test_encoding >expected && + mess.. two + mess.. one + add bar Z + init..lich + EOF test_cmp expected actual ' test_expect_success 'right alignment formatting' ' git log --pretty="tformat:%>(40)%s" >actual && - qz_to_tab_space <<EOF >expected && -Z message two -Z message one -Z add bar -Z $(commit_msg) -EOF + qz_to_tab_space <<-EOF >expected && + Z message two + Z message one + Z add bar + Z $(commit_msg) + EOF test_cmp expected actual ' test_expect_success 'right alignment formatting. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%>(40)%s" >actual && - qz_to_tab_space <<EOF | iconv -f utf-8 -t $test_encoding >expected && -Z message two -Z message one -Z add bar -Z $(commit_msg) -EOF + qz_to_tab_space <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + Z message two + Z message one + Z add bar + Z $(commit_msg) + EOF test_cmp expected actual ' test_expect_success 'right alignment formatting at the nth column' ' git log --pretty="tformat:%h %>|(40)%s" >actual && - qz_to_tab_space <<EOF >expected && -$head1 message two -$head2 message one -$head3 add bar -$head4 $(commit_msg) -EOF + qz_to_tab_space <<-EOF >expected && + $head1 message two + $head2 message one + $head3 add bar + $head4 $(commit_msg) + EOF + test_cmp expected actual +' + +test_expect_success 'right alignment formatting at the nth column' ' + COLUMNS=50 git log --pretty="tformat:%h %>|(-10)%s" >actual && + qz_to_tab_space <<-EOF >expected && + $head1 message two + $head2 message one + $head3 add bar + $head4 $(commit_msg) + EOF test_cmp expected actual ' test_expect_success 'right alignment formatting at the nth column. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%h %>|(40)%s" >actual && - qz_to_tab_space <<EOF | iconv -f utf-8 -t $test_encoding >expected && -$head1 message two -$head2 message one -$head3 add bar -$head4 $(commit_msg) -EOF + qz_to_tab_space <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + $head1 message two + $head2 message one + $head3 add bar + $head4 $(commit_msg) + EOF + test_cmp expected actual +' + +# Note: Space between 'message' and 'two' should be in the same column +# as in previous test. +test_expect_success 'right alignment formatting at the nth column with --graph. i18n.logOutputEncoding' ' + git -c i18n.logOutputEncoding=$test_encoding log --graph --pretty="tformat:%h %>|(40)%s" >actual && + iconv -f utf-8 -t $test_encoding >expected <<-EOF && + * $head1 message two + * $head2 message one + * $head3 add bar + * $head4 $(commit_msg) + EOF test_cmp expected actual ' test_expect_success 'right alignment formatting with no padding' ' git log --pretty="tformat:%>(1)%s" >actual && - cat <<EOF >expected && -message two -message one -add bar -$(commit_msg) -EOF + cat <<-EOF >expected && + message two + message one + add bar + $(commit_msg) + EOF + test_cmp expected actual +' + +test_expect_success 'right alignment formatting with no padding and with --graph' ' + git log --graph --pretty="tformat:%>(1)%s" >actual && + cat <<-EOF >expected && + * message two + * message one + * add bar + * $(commit_msg) + EOF test_cmp expected actual ' test_expect_success 'right alignment formatting with no padding. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%>(1)%s" >actual && - cat <<EOF | iconv -f utf-8 -t $test_encoding >expected && -message two -message one -add bar -$(commit_msg) -EOF + cat <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + message two + message one + add bar + $(commit_msg) + EOF test_cmp expected actual ' test_expect_success 'center alignment formatting' ' git log --pretty="tformat:%><(40)%s" >actual && - qz_to_tab_space <<EOF >expected && -Z message two Z -Z message one Z -Z add bar Z -Z $(commit_msg) Z -EOF + qz_to_tab_space <<-EOF >expected && + Z message two Z + Z message one Z + Z add bar Z + Z $(commit_msg) Z + EOF test_cmp expected actual ' test_expect_success 'center alignment formatting. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%><(40)%s" >actual && - qz_to_tab_space <<EOF | iconv -f utf-8 -t $test_encoding >expected && -Z message two Z -Z message one Z -Z add bar Z -Z $(commit_msg) Z -EOF + qz_to_tab_space <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + Z message two Z + Z message one Z + Z add bar Z + Z $(commit_msg) Z + EOF test_cmp expected actual ' test_expect_success 'center alignment formatting at the nth column' ' git log --pretty="tformat:%h %><|(40)%s" >actual && - qz_to_tab_space <<EOF >expected && -$head1 message two Z -$head2 message one Z -$head3 add bar Z -$head4 $(commit_msg) Z -EOF + qz_to_tab_space <<-EOF >expected && + $head1 message two Z + $head2 message one Z + $head3 add bar Z + $head4 $(commit_msg) Z + EOF + test_cmp expected actual +' + +test_expect_success 'center alignment formatting at the nth column' ' + COLUMNS=70 git log --pretty="tformat:%h %><|(-30)%s" >actual && + qz_to_tab_space <<-EOF >expected && + $head1 message two Z + $head2 message one Z + $head3 add bar Z + $head4 $(commit_msg) Z + EOF test_cmp expected actual ' test_expect_success 'center alignment formatting at the nth column. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%h %><|(40)%s" >actual && - qz_to_tab_space <<EOF | iconv -f utf-8 -t $test_encoding >expected && -$head1 message two Z -$head2 message one Z -$head3 add bar Z -$head4 $(commit_msg) Z -EOF + qz_to_tab_space <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + $head1 message two Z + $head2 message one Z + $head3 add bar Z + $head4 $(commit_msg) Z + EOF test_cmp expected actual ' test_expect_success 'center alignment formatting with no padding' ' git log --pretty="tformat:%><(1)%s" >actual && - cat <<EOF >expected && -message two -message one -add bar -$(commit_msg) -EOF + cat <<-EOF >expected && + message two + message one + add bar + $(commit_msg) + EOF test_cmp expected actual ' @@ -400,34 +457,34 @@ EOF old_head1=$(git rev-parse --verify HEAD~0) test_expect_success 'center alignment formatting with no padding. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%><(1)%s" >actual && - cat <<EOF | iconv -f utf-8 -t $test_encoding >expected && -message two -message one -add bar -$(commit_msg) -EOF + cat <<-EOF | iconv -f utf-8 -t $test_encoding >expected && + message two + message one + add bar + $(commit_msg) + EOF test_cmp expected actual ' test_expect_success 'left/right alignment formatting with stealing' ' git commit --amend -m short --author "long long long <long@me.com>" && git log --pretty="tformat:%<(10,trunc)%s%>>(10,ltrunc)% an" >actual && - cat <<EOF >expected && -short long long long -message .. A U Thor -add bar A U Thor -initial... A U Thor -EOF + cat <<-\EOF >expected && + short long long long + message .. A U Thor + add bar A U Thor + initial... A U Thor + EOF test_cmp expected actual ' test_expect_success 'left/right alignment formatting with stealing. i18n.logOutputEncoding' ' git -c i18n.logOutputEncoding=$test_encoding log --pretty="tformat:%<(10,trunc)%s%>>(10,ltrunc)% an" >actual && - cat <<EOF | iconv -f utf-8 -t $test_encoding >expected && -short long long long -message .. A U Thor -add bar A U Thor -initial... A U Thor -EOF + cat <<-\EOF | iconv -f utf-8 -t $test_encoding >expected && + short long long long + message .. A U Thor + add bar A U Thor + initial... A U Thor + EOF test_cmp expected actual ' @@ -447,8 +504,10 @@ test_expect_success 'ISO and ISO-strict date formats display the same values' ' ' # get new digests (with no abbreviations) -head1=$(git rev-parse --verify HEAD~0) && -head2=$(git rev-parse --verify HEAD~1) && +test_expect_success 'set up log decoration tests' ' + head1=$(git rev-parse --verify HEAD~0) && + head2=$(git rev-parse --verify HEAD~1) +' test_expect_success 'log decoration properly follows tag chain' ' git tag -a tag1 -m tag1 && @@ -456,24 +515,50 @@ test_expect_success 'log decoration properly follows tag chain' ' git tag -d tag1 && git commit --amend -m shorter && git log --no-walk --tags --pretty="%H %d" --decorate=full >actual && - cat <<EOF >expected && -$head1 (tag: refs/tags/tag2) -$head2 (tag: refs/tags/message-one) -$old_head1 (tag: refs/tags/message-two) -EOF + cat <<-EOF >expected && + $head1 (tag: refs/tags/tag2) + $head2 (tag: refs/tags/message-one) + $old_head1 (tag: refs/tags/message-two) + EOF sort actual >actual1 && test_cmp expected actual1 ' test_expect_success 'clean log decoration' ' git log --no-walk --tags --pretty="%H %D" --decorate=full >actual && - cat >expected <<EOF && -$head1 tag: refs/tags/tag2 -$head2 tag: refs/tags/message-one -$old_head1 tag: refs/tags/message-two -EOF + cat >expected <<-EOF && + $head1 tag: refs/tags/tag2 + $head2 tag: refs/tags/message-one + $old_head1 tag: refs/tags/message-two + EOF sort actual >actual1 && test_cmp expected actual1 ' +cat >trailers <<EOF +Signed-off-by: A U Thor <author@example.com> +Acked-by: A U Thor <author@example.com> +[ v2 updated patch description ] +Signed-off-by: A U Thor <author@example.com> +EOF + +test_expect_success 'pretty format %(trailers) shows trailers' ' + echo "Some contents" >trailerfile && + git add trailerfile && + git commit -F - <<-EOF && + trailers: this commit message has trailers + + This commit is a test commit with trailers at the end. We parse this + message and display the trailers using %bT + + $(cat trailers) + EOF + git log --no-walk --pretty="%(trailers)" >actual && + cat >expect <<-EOF && + $(cat trailers) + + EOF + test_cmp expect actual +' + test_done diff --git a/t/t4207-log-decoration-colors.sh b/t/t4207-log-decoration-colors.sh index f8008b6a3d..b972296f06 100755 --- a/t/t4207-log-decoration-colors.sh +++ b/t/t4207-log-decoration-colors.sh @@ -44,7 +44,7 @@ test_expect_success setup ' ' cat >expected <<EOF -${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_HEAD}HEAD${c_reset}${c_commit} ->\ +${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_HEAD}HEAD ->\ ${c_reset}${c_branch}master${c_reset}${c_commit},\ ${c_reset}${c_tag}tag: v1.0${c_reset}${c_commit},\ ${c_reset}${c_tag}tag: B${c_reset}${c_commit})${c_reset} B diff --git a/t/t4208-log-magic-pathspec.sh b/t/t4208-log-magic-pathspec.sh index d8f23f488e..001343e2fc 100755 --- a/t/t4208-log-magic-pathspec.sh +++ b/t/t4208-log-magic-pathspec.sh @@ -18,7 +18,7 @@ test_expect_success '"git log :/" should not be ambiguous' ' test_expect_success '"git log :/a" should be ambiguous (applied both rev and worktree)' ' : >a && test_must_fail git log :/a 2>error && - grep ambiguous error + test_i18ngrep ambiguous error ' test_expect_success '"git log :/a -- " should not be ambiguous' ' @@ -31,7 +31,7 @@ test_expect_success '"git log -- :/a" should not be ambiguous' ' test_expect_success '"git log :" should be ambiguous' ' test_must_fail git log : 2>error && - grep ambiguous error + test_i18ngrep ambiguous error ' test_expect_success 'git log -- :' ' diff --git a/t/t4211-line-log.sh b/t/t4211-line-log.sh index 4451127eb2..9d87777b59 100755 --- a/t/t4211-line-log.sh +++ b/t/t4211-line-log.sh @@ -99,4 +99,11 @@ test_expect_success '-L with --first-parent and a merge' ' git log --first-parent -L 1,1:b.c ' +test_expect_success '-L with --output' ' + git checkout parallel-change && + git log --output=log -L :main:b.c >output && + test ! -s output && + test_line_count = 70 log +' + test_done diff --git a/t/t4213-log-tabexpand.sh b/t/t4213-log-tabexpand.sh new file mode 100755 index 0000000000..e01a8f6ac9 --- /dev/null +++ b/t/t4213-log-tabexpand.sh @@ -0,0 +1,105 @@ +#!/bin/sh + +test_description='log/show --expand-tabs' + +. ./test-lib.sh + +HT=" " +title='tab indent at the beginning of the title line' +body='tab indent on a line in the body' + +# usage: count_expand $indent $numSP $numHT @format_args +count_expand () +{ + expect= + count=$(( $1 + $2 )) ;# expected spaces + while test $count -gt 0 + do + expect="$expect " + count=$(( $count - 1 )) + done + shift 2 + count=$1 ;# expected tabs + while test $count -gt 0 + do + expect="$expect$HT" + count=$(( $count - 1 )) + done + shift + + # The remainder of the command line is "git show -s" options + case " $* " in + *' --pretty=short '*) + line=$title ;; + *) + line=$body ;; + esac + + # Prefix the output with the command line arguments, and + # replace SP with a dot both in the expecte and actual output + # so that test_cmp would show the differene together with the + # breakage in a way easier to consume by the debugging user. + { + echo "git show -s $*" + echo "$expect$line" + } | sed -e 's/ /./g' >expect + + { + echo "git show -s $*" + git show -s "$@" | + sed -n -e "/$line\$/p" + } | sed -e 's/ /./g' >actual + + test_cmp expect actual +} + +test_expand () +{ + fmt=$1 + case "$fmt" in + *=raw | *=short | *=email) + default="0 1" ;; + *) + default="8 0" ;; + esac + case "$fmt" in + *=email) + in=0 ;; + *) + in=4 ;; + esac + test_expect_success "expand/no-expand${fmt:+ for $fmt}" ' + count_expand $in $default $fmt && + count_expand $in 8 0 $fmt --expand-tabs && + count_expand $in 8 0 --expand-tabs $fmt && + count_expand $in 8 0 $fmt --expand-tabs=8 && + count_expand $in 8 0 --expand-tabs=8 $fmt && + count_expand $in 0 1 $fmt --no-expand-tabs && + count_expand $in 0 1 --no-expand-tabs $fmt && + count_expand $in 0 1 $fmt --expand-tabs=0 && + count_expand $in 0 1 --expand-tabs=0 $fmt && + count_expand $in 4 0 $fmt --expand-tabs=4 && + count_expand $in 4 0 --expand-tabs=4 $fmt + ' +} + +test_expect_success 'setup' ' + test_tick && + sed -e "s/Q/$HT/g" <<-EOF >msg && + Q$title + + Q$body + EOF + git commit --allow-empty -F msg +' + +test_expand "" +test_expand --pretty +test_expand --pretty=short +test_expand --pretty=medium +test_expand --pretty=full +test_expand --pretty=fuller +test_expand --pretty=raw +test_expand --pretty=email + +test_done diff --git a/t/t4254-am-corrupt.sh b/t/t4254-am-corrupt.sh index 85716dd6ec..168739c721 100755 --- a/t/t4254-am-corrupt.sh +++ b/t/t4254-am-corrupt.sh @@ -29,9 +29,9 @@ test_expect_success 'try to apply corrupted patch' ' ' test_expect_success 'compare diagnostic; ensure file is still here' ' - echo "fatal: git diff header lacks filename information (line 4)" >expected && + echo "error: git diff header lacks filename information (line 4)" >expected && test_path_is_file f && - test_cmp expected actual + test_i18ncmp expected actual ' test_done diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 4b68bbafbe..886b6953e4 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -179,6 +179,15 @@ test_expect_success 'git archive --remote' \ 'git archive --remote=. HEAD >b5.tar && test_cmp_bin b.tar b5.tar' +test_expect_success 'git archive --remote with configured remote' ' + git config remote.foo.url . && + ( + cd a && + git archive --remote=foo --output=../b5-nick.tar HEAD + ) && + test_cmp_bin b.tar b5-nick.tar +' + test_expect_success \ 'validate file modification time' \ 'mkdir extract && @@ -197,9 +206,15 @@ test_expect_success 'git archive with --output, override inferred format' ' test_cmp_bin b.tar d4.zip ' -test_expect_success \ - 'git archive --list outside of a git repo' \ - 'GIT_DIR=some/non-existing/directory git archive --list' +test_expect_success 'git archive --list outside of a git repo' ' + nongit git archive --list +' + +test_expect_success 'git archive --remote outside of a git repo' ' + git archive HEAD >expect.tar && + nongit git archive --remote="$PWD" HEAD >actual.tar && + test_cmp_bin expect.tar actual.tar +' test_expect_success 'clients cannot access unreachable commits' ' test_commit unreachable && @@ -319,4 +334,78 @@ test_expect_success 'catch non-matching pathspec' ' test_must_fail git archive -v HEAD -- "*.abc" >/dev/null ' +# Pull the size and date of each entry in a tarfile using the system tar. +# +# We'll pull out only the year from the date; that avoids any question of +# timezones impacting the result (as long as we keep our test times away from a +# year boundary; our reference times are all in August). +# +# The output of tar_info is expected to be "<size> <year>", both in decimal. It +# ignores the return value of tar. We have to do this, because some of our test +# input is only partial (the real data is 64GB in some cases). +tar_info () { + "$TAR" tvf "$1" | + awk '{ + split($4, date, "-") + print $3 " " date[1] + }' +} + +# See if our system tar can handle a tar file with huge sizes and dates far in +# the future, and that we can actually parse its output. +# +# The reference file was generated by GNU tar, and the magic time and size are +# both octal 01000000000001, which overflows normal ustar fields. +test_lazy_prereq TAR_HUGE ' + echo "68719476737 4147" >expect && + tar_info "$TEST_DIRECTORY"/t5000/huge-and-future.tar >actual && + test_cmp expect actual +' + +test_expect_success LONG_IS_64BIT 'set up repository with huge blob' ' + obj_d=19 && + obj_f=f9c8273ec45a8938e6999cb59b3ff66739902a && + obj=${obj_d}${obj_f} && + mkdir -p .git/objects/$obj_d && + cp "$TEST_DIRECTORY"/t5000/$obj .git/objects/$obj_d/$obj_f && + rm -f .git/index && + git update-index --add --cacheinfo 100644,$obj,huge && + git commit -m huge +' + +# We expect git to die with SIGPIPE here (otherwise we +# would generate the whole 64GB). +test_expect_success LONG_IS_64BIT 'generate tar with huge size' ' + { + git archive HEAD + echo $? >exit-code + } | test_copy_bytes 4096 >huge.tar && + echo 141 >expect && + test_cmp expect exit-code +' + +test_expect_success TAR_HUGE,LONG_IS_64BIT 'system tar can read our huge size' ' + echo 68719476737 >expect && + tar_info huge.tar | cut -d" " -f1 >actual && + test_cmp expect actual +' + +test_expect_success LONG_IS_64BIT 'set up repository with far-future commit' ' + rm -f .git/index && + echo content >file && + git add file && + GIT_COMMITTER_DATE="@68719476737 +0000" \ + git commit -m "tempori parendum" +' + +test_expect_success LONG_IS_64BIT 'generate tar with future mtime' ' + git archive HEAD >future.tar +' + +test_expect_success TAR_HUGE,LONG_IS_64BIT 'system tar can read our future mtime' ' + echo 4147 >expect && + tar_info future.tar | cut -d" " -f2 >actual && + test_cmp expect actual +' + test_done diff --git a/t/t5000/19f9c8273ec45a8938e6999cb59b3ff66739902a b/t/t5000/19f9c8273ec45a8938e6999cb59b3ff66739902a Binary files differnew file mode 100644 index 0000000000..5cbe9ec312 --- /dev/null +++ b/t/t5000/19f9c8273ec45a8938e6999cb59b3ff66739902a diff --git a/t/t5000/huge-and-future.tar b/t/t5000/huge-and-future.tar Binary files differnew file mode 100644 index 0000000000..63155e1855 --- /dev/null +++ b/t/t5000/huge-and-future.tar diff --git a/t/t5003-archive-zip.sh b/t/t5003-archive-zip.sh index 14744b2a4b..55c7870997 100755 --- a/t/t5003-archive-zip.sh +++ b/t/t5003-archive-zip.sh @@ -64,6 +64,12 @@ check_zip() { test_cmp_bin $original/nodiff.crlf $extracted/nodiff.crlf && test_cmp_bin $original/nodiff.lf $extracted/nodiff.lf " + + test_expect_success UNZIP " validate that custom diff is unchanged " " + test_cmp_bin $original/custom.cr $extracted/custom.cr && + test_cmp_bin $original/custom.crlf $extracted/custom.crlf && + test_cmp_bin $original/custom.lf $extracted/custom.lf + " } test_expect_success \ @@ -78,6 +84,9 @@ test_expect_success \ printf "text\r" >a/nodiff.cr && printf "text\r\n" >a/nodiff.crlf && printf "text\n" >a/nodiff.lf && + printf "text\r" >a/custom.cr && + printf "text\r\n" >a/custom.crlf && + printf "text\n" >a/custom.lf && printf "\0\r" >a/binary.cr && printf "\0\r\n" >a/binary.crlf && printf "\0\n" >a/binary.lf && @@ -112,15 +121,20 @@ test_expect_success 'add files to repository' ' test_expect_success 'setup export-subst and diff attributes' ' echo "a/nodiff.* -diff" >>.git/info/attributes && echo "a/diff.* diff" >>.git/info/attributes && + echo "a/custom.* diff=custom" >>.git/info/attributes && + git config diff.custom.binary true && echo "substfile?" export-subst >>.git/info/attributes && git log --max-count=1 "--pretty=format:A${SUBSTFORMAT}O" HEAD \ >a/substfile1 ' -test_expect_success \ - 'create bare clone' \ - 'git clone --bare . bare.git && - cp .git/info/attributes bare.git/info/attributes' +test_expect_success 'create bare clone' ' + git clone --bare . bare.git && + cp .git/info/attributes bare.git/info/attributes && + # Recreate our changes to .git/config rather than just copying it, as + # we do not want to clobber core.bare or other settings. + git -C bare.git config diff.custom.binary true +' test_expect_success \ 'remove ignored file' \ diff --git a/t/t5004-archive-corner-cases.sh b/t/t5004-archive-corner-cases.sh index 654addaae3..cca23383c5 100755 --- a/t/t5004-archive-corner-cases.sh +++ b/t/t5004-archive-corner-cases.sh @@ -115,4 +115,44 @@ test_expect_success 'archive empty subtree by direct pathspec' ' check_dir extract sub ' +ZIPINFO=zipinfo + +test_lazy_prereq ZIPINFO ' + n=$("$ZIPINFO" "$TEST_DIRECTORY"/t5004/empty.zip | sed -n "2s/.* //p") + test "x$n" = "x0" +' + +test_expect_success ZIPINFO 'zip archive with many entries' ' + # add a directory with 256 files + mkdir 00 && + for a in 0 1 2 3 4 5 6 7 8 9 a b c d e f + do + for b in 0 1 2 3 4 5 6 7 8 9 a b c d e f + do + : >00/$a$b + done + done && + git add 00 && + git commit -m "256 files in 1 directory" && + + # duplicate it to get 65536 files in 256 directories + subtree=$(git write-tree --prefix=00/) && + for c in 0 1 2 3 4 5 6 7 8 9 a b c d e f + do + for d in 0 1 2 3 4 5 6 7 8 9 a b c d e f + do + echo "040000 tree $subtree $c$d" + done + done >tree && + tree=$(git mktree <tree) && + + # zip them + git archive -o many.zip $tree && + + # check the number of entries in the ZIP file directory + expr 65536 + 256 >expect && + "$ZIPINFO" many.zip | head -2 | sed -n "2s/.* //p" >actual && + test_cmp expect actual +' + test_done diff --git a/t/t5100-mailinfo.sh b/t/t5100-mailinfo.sh index e97cfb2ab8..7171f67539 100755 --- a/t/t5100-mailinfo.sh +++ b/t/t5100-mailinfo.sh @@ -7,37 +7,39 @@ test_description='git mailinfo and git mailsplit test' . ./test-lib.sh +DATA="$TEST_DIRECTORY/t5100" + test_expect_success 'split sample box' \ - 'git mailsplit -o. "$TEST_DIRECTORY"/t5100/sample.mbox >last && - last=`cat last` && + 'git mailsplit -o. "$DATA/sample.mbox" >last && + last=$(cat last) && echo total is $last && - test `cat last` = 17' + test $(cat last) = 18' check_mailinfo () { mail=$1 opt=$2 mo="$mail$opt" - git mailinfo -u $opt msg$mo patch$mo <$mail >info$mo && - test_cmp "$TEST_DIRECTORY"/t5100/msg$mo msg$mo && - test_cmp "$TEST_DIRECTORY"/t5100/patch$mo patch$mo && - test_cmp "$TEST_DIRECTORY"/t5100/info$mo info$mo + git mailinfo -u $opt "msg$mo" "patch$mo" <"$mail" >"info$mo" && + test_cmp "$DATA/msg$mo" "msg$mo" && + test_cmp "$DATA/patch$mo" "patch$mo" && + test_cmp "$DATA/info$mo" "info$mo" } -for mail in `echo 00*` +for mail in 00* do test_expect_success "mailinfo $mail" ' - check_mailinfo $mail "" && - if test -f "$TEST_DIRECTORY"/t5100/msg$mail--scissors + check_mailinfo "$mail" "" && + if test -f "$DATA/msg$mail--scissors" then - check_mailinfo $mail --scissors + check_mailinfo "$mail" --scissors fi && - if test -f "$TEST_DIRECTORY"/t5100/msg$mail--no-inbody-headers + if test -f "$DATA/msg$mail--no-inbody-headers" then - check_mailinfo $mail --no-inbody-headers + check_mailinfo "$mail" --no-inbody-headers fi && - if test -f "$TEST_DIRECTORY"/t5100/msg$mail--message-id + if test -f "$DATA/msg$mail--message-id" then - check_mailinfo $mail --message-id + check_mailinfo "$mail" --message-id fi ' done @@ -45,29 +47,29 @@ done test_expect_success 'split box with rfc2047 samples' \ 'mkdir rfc2047 && - git mailsplit -orfc2047 "$TEST_DIRECTORY"/t5100/rfc2047-samples.mbox \ + git mailsplit -orfc2047 "$DATA/rfc2047-samples.mbox" \ >rfc2047/last && - last=`cat rfc2047/last` && + last=$(cat rfc2047/last) && echo total is $last && - test `cat rfc2047/last` = 11' + test $(cat rfc2047/last) = 11' -for mail in `echo rfc2047/00*` +for mail in rfc2047/00* do test_expect_success "mailinfo $mail" ' - git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info && + git mailinfo -u "$mail-msg" "$mail-patch" <"$mail" >"$mail-info" && echo msg && - test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg && + test_cmp "$DATA/empty" "$mail-msg" && echo patch && - test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch && + test_cmp "$DATA/empty" "$mail-patch" && echo info && - test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info + test_cmp "$DATA/rfc2047-info-$(basename $mail)" "$mail-info" ' done test_expect_success 'respect NULs' ' - git mailsplit -d3 -o. "$TEST_DIRECTORY"/t5100/nul-plain && - test_cmp "$TEST_DIRECTORY"/t5100/nul-plain 001 && + git mailsplit -d3 -o. "$DATA/nul-plain" && + test_cmp "$DATA/nul-plain" 001 && (cat 001 | git mailinfo msg patch) && test_line_count = 4 patch @@ -75,40 +77,98 @@ test_expect_success 'respect NULs' ' test_expect_success 'Preserve NULs out of MIME encoded message' ' - git mailsplit -d5 -o. "$TEST_DIRECTORY"/t5100/nul-b64.in && - test_cmp "$TEST_DIRECTORY"/t5100/nul-b64.in 00001 && + git mailsplit -d5 -o. "$DATA/nul-b64.in" && + test_cmp "$DATA/nul-b64.in" 00001 && git mailinfo msg patch <00001 && - test_cmp "$TEST_DIRECTORY"/t5100/nul-b64.expect patch + test_cmp "$DATA/nul-b64.expect" patch ' test_expect_success 'mailinfo on from header without name works' ' mkdir info-from && - git mailsplit -oinfo-from "$TEST_DIRECTORY"/t5100/info-from.in && - test_cmp "$TEST_DIRECTORY"/t5100/info-from.in info-from/0001 && + git mailsplit -oinfo-from "$DATA/info-from.in" && + test_cmp "$DATA/info-from.in" info-from/0001 && git mailinfo info-from/msg info-from/patch \ <info-from/0001 >info-from/out && - test_cmp "$TEST_DIRECTORY"/t5100/info-from.expect info-from/out + test_cmp "$DATA/info-from.expect" info-from/out ' test_expect_success 'mailinfo finds headers after embedded From line' ' mkdir embed-from && - git mailsplit -oembed-from "$TEST_DIRECTORY"/t5100/embed-from.in && - test_cmp "$TEST_DIRECTORY"/t5100/embed-from.in embed-from/0001 && + git mailsplit -oembed-from "$DATA/embed-from.in" && + test_cmp "$DATA/embed-from.in" embed-from/0001 && git mailinfo embed-from/msg embed-from/patch \ <embed-from/0001 >embed-from/out && - test_cmp "$TEST_DIRECTORY"/t5100/embed-from.expect embed-from/out + test_cmp "$DATA/embed-from.expect" embed-from/out ' test_expect_success 'mailinfo on message with quoted >From' ' mkdir quoted-from && - git mailsplit -oquoted-from "$TEST_DIRECTORY"/t5100/quoted-from.in && - test_cmp "$TEST_DIRECTORY"/t5100/quoted-from.in quoted-from/0001 && + git mailsplit -oquoted-from "$DATA/quoted-from.in" && + test_cmp "$DATA/quoted-from.in" quoted-from/0001 && git mailinfo quoted-from/msg quoted-from/patch \ <quoted-from/0001 >quoted-from/out && - test_cmp "$TEST_DIRECTORY"/t5100/quoted-from.expect quoted-from/msg + test_cmp "$DATA/quoted-from.expect" quoted-from/msg +' + +test_expect_success 'mailinfo unescapes with --mboxrd' ' + mkdir mboxrd && + git mailsplit -omboxrd --mboxrd \ + "$DATA/sample.mboxrd" >last && + test x"$(cat last)" = x2 && + for i in 0001 0002 + do + git mailinfo mboxrd/msg mboxrd/patch \ + <mboxrd/$i >mboxrd/out && + test_cmp "$DATA/${i}mboxrd" mboxrd/msg + done && + sp=" " && + echo "From " >expect && + echo "From " >>expect && + echo >> expect && + cat >sp <<-INPUT_END && + From mboxrd Mon Sep 17 00:00:00 2001 + From: trailing spacer <sp@example.com> + Subject: [PATCH] a commit with trailing space + + From$sp + >From$sp + + INPUT_END + + git mailsplit -f2 -omboxrd --mboxrd <sp >last && + test x"$(cat last)" = x1 && + git mailinfo mboxrd/msg mboxrd/patch <mboxrd/0003 && + test_cmp expect mboxrd/msg +' + +test_expect_success 'mailinfo handles rfc2822 quoted-string' ' + mkdir quoted-string && + git mailinfo /dev/null /dev/null <"$DATA/quoted-string.in" \ + >quoted-string/info && + test_cmp "$DATA/quoted-string.expect" quoted-string/info ' +test_expect_success 'mailinfo handles rfc2822 comment' ' + mkdir comment && + git mailinfo /dev/null /dev/null <"$DATA/comment.in" \ + >comment/info && + test_cmp "$DATA/comment.expect" comment/info +' + +test_expect_success 'mailinfo with mailinfo.scissors config' ' + test_config mailinfo.scissors true && + ( + mkdir sub && + cd sub && + git mailinfo ../msg0014.sc ../patch0014.sc <../0014 >../info0014.sc + ) && + test_cmp "$DATA/msg0014--scissors" msg0014.sc && + test_cmp "$DATA/patch0014--scissors" patch0014.sc && + test_cmp "$DATA/info0014--scissors" info0014.sc +' + + test_done diff --git a/t/t5100/0001mboxrd b/t/t5100/0001mboxrd new file mode 100644 index 0000000000..494ec554b9 --- /dev/null +++ b/t/t5100/0001mboxrd @@ -0,0 +1,4 @@ +From the beginning, mbox should have been mboxrd +>From escaped +From not mangled but this line should have been escaped + diff --git a/t/t5100/0002mboxrd b/t/t5100/0002mboxrd new file mode 100644 index 0000000000..71343d41f2 --- /dev/null +++ b/t/t5100/0002mboxrd @@ -0,0 +1,5 @@ + >From unchanged + From also unchanged +no trailing space, no escaping necessary and '>' was intended: +>From + diff --git a/t/t5100/comment.expect b/t/t5100/comment.expect new file mode 100644 index 0000000000..7228177984 --- /dev/null +++ b/t/t5100/comment.expect @@ -0,0 +1,5 @@ +Author: A U Thor (this is (really) a comment (honestly)) +Email: somebody@example.com +Subject: testing comments +Date: Sun, 25 May 2008 00:38:18 -0700 + diff --git a/t/t5100/comment.in b/t/t5100/comment.in new file mode 100644 index 0000000000..c53a192dfe --- /dev/null +++ b/t/t5100/comment.in @@ -0,0 +1,9 @@ +From 1234567890123456789012345678901234567890 Mon Sep 17 00:00:00 2001 +From: "A U Thor" <somebody@example.com> (this is \(really\) a comment (honestly)) +Date: Sun, 25 May 2008 00:38:18 -0700 +Subject: [PATCH] testing comments + + + +--- +patch diff --git a/t/t5100/info0018 b/t/t5100/info0018 new file mode 100644 index 0000000000..d53e7491c7 --- /dev/null +++ b/t/t5100/info0018 @@ -0,0 +1,5 @@ +Author: Another Thor +Email: a.thor@example.com +Subject: This one contains a tab and a space +Date: Fri, 9 Jun 2006 00:44:16 -0700 + diff --git a/t/t5100/info0018--no-inbody-headers b/t/t5100/info0018--no-inbody-headers new file mode 100644 index 0000000000..30b17bd913 --- /dev/null +++ b/t/t5100/info0018--no-inbody-headers @@ -0,0 +1,5 @@ +Author: A U Thor +Email: a.u.thor@example.com +Subject: check multiline inbody headers +Date: Fri, 9 Jun 2006 00:44:16 -0700 + diff --git a/t/t5100/msg0015 b/t/t5100/msg0015 index 4abb3d5c6c..e69de29bb2 100644 --- a/t/t5100/msg0015 +++ b/t/t5100/msg0015 @@ -1,2 +0,0 @@ - - a list - - of stuff diff --git a/t/t5100/msg0018 b/t/t5100/msg0018 new file mode 100644 index 0000000000..56de83d7fc --- /dev/null +++ b/t/t5100/msg0018 @@ -0,0 +1,2 @@ +a commit message + diff --git a/t/t5100/msg0018--no-inbody-headers b/t/t5100/msg0018--no-inbody-headers new file mode 100644 index 0000000000..b1e05d3862 --- /dev/null +++ b/t/t5100/msg0018--no-inbody-headers @@ -0,0 +1,8 @@ +From: Another Thor + <a.thor@example.com> +Subject: This one contains + a tab + and a space + +a commit message + diff --git a/t/t5100/patch0018 b/t/t5100/patch0018 new file mode 100644 index 0000000000..789df6d030 --- /dev/null +++ b/t/t5100/patch0018 @@ -0,0 +1,6 @@ +diff --git a/foo b/foo +index e69de29..d95f3ad 100644 +--- a/foo ++++ b/foo +@@ -0,0 +1 @@ ++content diff --git a/t/t5100/patch0018--no-inbody-headers b/t/t5100/patch0018--no-inbody-headers new file mode 100644 index 0000000000..789df6d030 --- /dev/null +++ b/t/t5100/patch0018--no-inbody-headers @@ -0,0 +1,6 @@ +diff --git a/foo b/foo +index e69de29..d95f3ad 100644 +--- a/foo ++++ b/foo +@@ -0,0 +1 @@ ++content diff --git a/t/t5100/quoted-string.expect b/t/t5100/quoted-string.expect new file mode 100644 index 0000000000..cab1bcebf9 --- /dev/null +++ b/t/t5100/quoted-string.expect @@ -0,0 +1,5 @@ +Author: Author "The Author" Name +Email: somebody@example.com +Subject: testing quoted-pair +Date: Sun, 25 May 2008 00:38:18 -0700 + diff --git a/t/t5100/quoted-string.in b/t/t5100/quoted-string.in new file mode 100644 index 0000000000..e2e627ae23 --- /dev/null +++ b/t/t5100/quoted-string.in @@ -0,0 +1,9 @@ +From 1234567890123456789012345678901234567890 Mon Sep 17 00:00:00 2001 +From: "Author \"The Author\" Name" <somebody@example.com> +Date: Sun, 25 May 2008 00:38:18 -0700 +Subject: [PATCH] testing quoted-pair + + + +--- +patch diff --git a/t/t5100/sample.mbox b/t/t5100/sample.mbox index 8b2ae064c3..6d4d0e4474 100644 --- a/t/t5100/sample.mbox +++ b/t/t5100/sample.mbox @@ -699,3 +699,22 @@ index e69de29..d95f3ad 100644 +++ b/foo @@ -0,0 +1 @@ +New content +From nobody Mon Sep 17 00:00:00 2001 +From: A U Thor <a.u.thor@example.com> +Subject: check multiline inbody headers +Date: Fri, 9 Jun 2006 00:44:16 -0700 + +From: Another Thor + <a.thor@example.com> +Subject: This one contains + a tab + and a space + +a commit message + +diff --git a/foo b/foo +index e69de29..d95f3ad 100644 +--- a/foo ++++ b/foo +@@ -0,0 +1 @@ ++content diff --git a/t/t5100/sample.mboxrd b/t/t5100/sample.mboxrd new file mode 100644 index 0000000000..79ad5ae0e7 --- /dev/null +++ b/t/t5100/sample.mboxrd @@ -0,0 +1,19 @@ +From mboxrd Mon Sep 17 00:00:00 2001 +From: mboxrd writer <mboxrd@example.com> +Date: Fri, 9 Jun 2006 00:44:16 -0700 +Subject: [PATCH] a commit with escaped From lines + +>From the beginning, mbox should have been mboxrd +>>From escaped +From not mangled but this line should have been escaped + +From mboxrd Mon Sep 17 00:00:00 2001 +From: mboxrd writer <mboxrd@example.com> +Date: Fri, 9 Jun 2006 00:44:16 -0700 +Subject: [PATCH 2/2] another with fake From lines + + >From unchanged + From also unchanged +no trailing space, no escaping necessary and '>' was intended: +>From + diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 20c1961515..43a672c345 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -8,7 +8,7 @@ test_description='git pack-object ' . ./test-lib.sh -TRASH=`pwd` +TRASH=$(pwd) test_expect_success \ 'setup' \ @@ -20,8 +20,8 @@ test_expect_success \ test-genrandom "seed b" 2097152 > b_big && git update-index --add a a_big b b_big c && cat c >d && echo foo >>d && git update-index --add d && - tree=`git write-tree` && - commit=`git commit-tree $tree </dev/null` && { + tree=$(git write-tree) && + commit=$(git commit-tree $tree </dev/null) && { echo $tree && echo $commit && git ls-tree $tree | sed -e "s/.* \\([0-9a-f]*\\) .*/\\1/" @@ -29,7 +29,7 @@ test_expect_success \ git diff-tree --root -p $commit && while read object do - t=`git cat-file -t $object` && + t=$(git cat-file -t $object) && git cat-file $t $object || return 1 done <obj-list } >expect' @@ -147,7 +147,7 @@ test_expect_success \ git diff-tree --root -p $commit && while read object do - t=`git cat-file -t $object` && + t=$(git cat-file -t $object) && git cat-file $t $object || return 1 done <obj-list } >current && @@ -162,7 +162,7 @@ test_expect_success \ git diff-tree --root -p $commit && while read object do - t=`git cat-file -t $object` && + t=$(git cat-file -t $object) && git cat-file $t $object || return 1 done <obj-list } >current && @@ -177,7 +177,7 @@ test_expect_success \ git diff-tree --root -p $commit && while read object do - t=`git cat-file -t $object` && + t=$(git cat-file -t $object) && git cat-file $t $object || return 1 done <obj-list } >current && @@ -252,8 +252,8 @@ test_expect_success \ test_expect_success \ 'verify-pack catches a corrupted sum of the index file itself' \ - 'l=`wc -c <test-3.idx` && - l=`expr $l - 20` && + 'l=$(wc -c <test-3.idx) && + l=$(expr $l - 20) && cat test-1-${packname_1}.pack >test-3.pack && printf "%20s" "" | dd of=test-3.idx count=20 bs=1 conv=notrunc seek=$l && if git verify-pack test-3.pack @@ -284,6 +284,12 @@ test_expect_success \ git index-pack test-3.pack && cmp test-3.idx test-3-${packname_3}.idx && + cat test-1-${packname_1}.pack >test-4.pack && + rm -f test-4.keep && + git index-pack --keep=why test-4.pack && + cmp test-1-${packname_1}.idx test-4.idx && + test -f test-4.keep && + :' test_expect_success 'unpacking with --strict' ' @@ -400,6 +406,21 @@ test_expect_success 'verify resulting packs' ' git verify-pack test-11-*.pack ' +test_expect_success 'set up pack for non-repo tests' ' + # make sure we have a pack with no matching index file + cp test-1-*.pack foo.pack +' + +test_expect_success 'index-pack --stdin complains of non-repo' ' + nongit test_must_fail git index-pack --stdin <foo.pack && + test_path_is_missing non-repo/.git +' + +test_expect_success 'index-pack <pack> works in non-repo' ' + nongit git index-pack ../foo.pack && + test_path_is_file foo.idx +' + # # WARNING! # diff --git a/t/t5301-sliding-window.sh b/t/t5301-sliding-window.sh index 2fc5af6007..cae8c2e882 100755 --- a/t/t5301-sliding-window.sh +++ b/t/t5301-sliding-window.sh @@ -16,12 +16,12 @@ test_expect_success \ git update-index --add $i || return 1 done && echo d >d && cat c >>d && git update-index --add d && - tree=`git write-tree` && - commit1=`git commit-tree $tree </dev/null` && + tree=$(git write-tree) && + commit1=$(git commit-tree $tree </dev/null) && git update-ref HEAD $commit1 && git repack -a -d && - test "`git count-objects`" = "0 objects, 0 kilobytes" && - pack1=`ls .git/objects/pack/*.pack` && + test "$(git count-objects)" = "0 objects, 0 kilobytes" && + pack1=$(ls .git/objects/pack/*.pack) && test -f "$pack1"' test_expect_success \ @@ -43,11 +43,11 @@ test_expect_success \ 'repack -a -d, packedGit{WindowSize,Limit} == 1 page' \ 'git config core.packedGitWindowSize 512 && git config core.packedGitLimit 512 && - commit2=`git commit-tree $tree -p $commit1 </dev/null` && + commit2=$(git commit-tree $tree -p $commit1 </dev/null) && git update-ref HEAD $commit2 && git repack -a -d && - test "`git count-objects`" = "0 objects, 0 kilobytes" && - pack2=`ls .git/objects/pack/*.pack` && + test "$(git count-objects)" = "0 objects, 0 kilobytes" && + pack2=$(ls .git/objects/pack/*.pack) && test -f "$pack2" && test "$pack1" \!= "$pack2"' diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index 61bc8da560..c2fc584dac 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -14,21 +14,21 @@ test_expect_success \ i=1 && while test $i -le 100 do - iii=`printf '%03i' $i` + iii=$(printf '%03i' $i) test-genrandom "bar" 200 > wide_delta_$iii && test-genrandom "baz $iii" 50 >> wide_delta_$iii && test-genrandom "foo"$i 100 > deep_delta_$iii && - test-genrandom "foo"`expr $i + 1` 100 >> deep_delta_$iii && - test-genrandom "foo"`expr $i + 2` 100 >> deep_delta_$iii && + test-genrandom "foo"$(expr $i + 1) 100 >> deep_delta_$iii && + test-genrandom "foo"$(expr $i + 2) 100 >> deep_delta_$iii && echo $iii >file_$iii && test-genrandom "$iii" 8192 >>file_$iii && git update-index --add file_$iii deep_delta_$iii wide_delta_$iii && - i=`expr $i + 1` || return 1 + i=$(expr $i + 1) || return 1 done && { echo 101 && test-genrandom 100 8192; } >file_101 && git update-index --add file_101 && - tree=`git write-tree` && - commit=`git commit-tree $tree </dev/null` && { + tree=$(git write-tree) && + commit=$(git commit-tree $tree </dev/null) && { echo $tree && git ls-tree $tree | sed -e "s/.* \\([0-9a-f]*\\) .*/\\1/" } >obj-list && @@ -152,10 +152,10 @@ test_expect_success \ '[index v1] 2) create a stealth corruption in a delta base reference' \ '# This test assumes file_101 is a delta smaller than 16 bytes. # It should be against file_100 but we substitute its base for file_099 - sha1_101=`git hash-object file_101` && - sha1_099=`git hash-object file_099` && - offs_101=`index_obj_offset 1.idx $sha1_101` && - nr_099=`index_obj_nr 1.idx $sha1_099` && + sha1_101=$(git hash-object file_101) && + sha1_099=$(git hash-object file_099) && + offs_101=$(index_obj_offset 1.idx $sha1_101) && + nr_099=$(index_obj_nr 1.idx $sha1_099) && chmod +w ".git/objects/pack/pack-${pack1}.pack" && dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($offs_101 + 1)) \ if=".git/objects/pack/pack-${pack1}.idx" \ @@ -193,10 +193,10 @@ test_expect_success \ '[index v2] 2) create a stealth corruption in a delta base reference' \ '# This test assumes file_101 is a delta smaller than 16 bytes. # It should be against file_100 but we substitute its base for file_099 - sha1_101=`git hash-object file_101` && - sha1_099=`git hash-object file_099` && - offs_101=`index_obj_offset 1.idx $sha1_101` && - nr_099=`index_obj_nr 1.idx $sha1_099` && + sha1_101=$(git hash-object file_101) && + sha1_099=$(git hash-object file_099) && + offs_101=$(index_obj_offset 1.idx $sha1_101) && + nr_099=$(index_obj_nr 1.idx $sha1_099) && chmod +w ".git/objects/pack/pack-${pack1}.pack" && dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($offs_101 + 1)) \ if=".git/objects/pack/pack-${pack1}.idx" \ @@ -222,11 +222,11 @@ test_expect_success \ 'rm -f .git/objects/pack/* && git index-pack --index-version=2 --stdin < "test-1-${pack1}.pack" && git verify-pack ".git/objects/pack/pack-${pack1}.pack" && - obj=`git hash-object file_001` && - nr=`index_obj_nr ".git/objects/pack/pack-${pack1}.idx" $obj` && + obj=$(git hash-object file_001) && + nr=$(index_obj_nr ".git/objects/pack/pack-${pack1}.idx" $obj) && chmod +w ".git/objects/pack/pack-${pack1}.idx" && printf xxxx | dd of=".git/objects/pack/pack-${pack1}.idx" conv=notrunc \ - bs=1 count=4 seek=$((8 + 256 * 4 + `wc -l <obj-list` * 20 + $nr * 4)) && + bs=1 count=4 seek=$((8 + 256 * 4 + $(wc -l <obj-list) * 20 + $nr * 4)) && ( while read obj do git cat-file -p $obj >/dev/null || exit 1 done <obj-list ) && @@ -259,7 +259,7 @@ EOF thirtyeight=${tag#??} && rm -f .git/objects/${tag%$thirtyeight}/$thirtyeight && git index-pack --strict tag-test-${pack1}.pack 2>err && - grep "^error:.* expected .tagger. line" err + grep "^warning:.* expected .tagger. line" err ' test_done diff --git a/t/t5303-pack-corruption-resilience.sh b/t/t5303-pack-corruption-resilience.sh index 663b02bbb1..5940ce2084 100755 --- a/t/t5303-pack-corruption-resilience.sh +++ b/t/t5303-pack-corruption-resilience.sh @@ -32,23 +32,23 @@ create_test_files() { create_new_pack() { rm -rf .git && git init && - blob_1=`git hash-object -t blob -w file_1` && - blob_2=`git hash-object -t blob -w file_2` && - blob_3=`git hash-object -t blob -w file_3` && - pack=`printf "$blob_1\n$blob_2\n$blob_3\n" | - git pack-objects $@ .git/objects/pack/pack` && + blob_1=$(git hash-object -t blob -w file_1) && + blob_2=$(git hash-object -t blob -w file_2) && + blob_3=$(git hash-object -t blob -w file_3) && + pack=$(printf "$blob_1\n$blob_2\n$blob_3\n" | + git pack-objects $@ .git/objects/pack/pack) && pack=".git/objects/pack/pack-${pack}" && git verify-pack -v ${pack}.pack } do_repack() { - pack=`printf "$blob_1\n$blob_2\n$blob_3\n" | - git pack-objects $@ .git/objects/pack/pack` && + pack=$(printf "$blob_1\n$blob_2\n$blob_3\n" | + git pack-objects $@ .git/objects/pack/pack) && pack=".git/objects/pack/pack-${pack}" } do_corrupt_object() { - ofs=`git show-index < ${pack}.idx | grep $1 | cut -f1 -d" "` && + ofs=$(git show-index < ${pack}.idx | grep $1 | cut -f1 -d" ") && ofs=$(($ofs + $2)) && chmod +w ${pack}.pack && dd of=${pack}.pack bs=1 conv=notrunc seek=$ofs && diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index 0794d33dad..133b5842b1 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -218,6 +218,8 @@ test_expect_success 'gc: prune old objects after local clone' ' ' test_expect_success 'garbage report in count-objects -v' ' + test_when_finished "rm -f .git/objects/pack/fake*" && + test_when_finished "rm -f .git/objects/pack/foo*" && : >.git/objects/pack/foo && : >.git/objects/pack/foo.bar && : >.git/objects/pack/foo.keep && @@ -243,8 +245,28 @@ EOF test_cmp expected actual ' +test_expect_success 'clean pack garbage with gc' ' + test_when_finished "rm -f .git/objects/pack/fake*" && + test_when_finished "rm -f .git/objects/pack/foo*" && + : >.git/objects/pack/foo.keep && + : >.git/objects/pack/foo.pack && + : >.git/objects/pack/fake.idx && + : >.git/objects/pack/fake2.keep && + : >.git/objects/pack/fake2.idx && + : >.git/objects/pack/fake3.keep && + git gc && + git count-objects -v 2>stderr && + grep "^warning:" stderr | sort >actual && + cat >expected <<\EOF && +warning: no corresponding .idx or .pack: .git/objects/pack/fake3.keep +warning: no corresponding .idx: .git/objects/pack/foo.keep +warning: no corresponding .idx: .git/objects/pack/foo.pack +EOF + test_cmp expected actual +' + test_expect_success 'prune .git/shallow' ' - SHA1=`echo hi|git commit-tree HEAD^{tree}` && + SHA1=$(echo hi|git commit-tree HEAD^{tree}) && echo $SHA1 >.git/shallow && git prune --dry-run >out && grep $SHA1 .git/shallow && diff --git a/t/t5305-include-tag.sh b/t/t5305-include-tag.sh index 21517c70cd..a5eca210b8 100755 --- a/t/t5305-include-tag.sh +++ b/t/t5305-include-tag.sh @@ -3,20 +3,20 @@ test_description='git pack-object --include-tag' . ./test-lib.sh -TRASH=`pwd` +TRASH=$(pwd) test_expect_success setup ' echo c >d && git update-index --add d && - tree=`git write-tree` && - commit=`git commit-tree $tree </dev/null` && + tree=$(git write-tree) && + commit=$(git commit-tree $tree </dev/null) && echo "object $commit" >sig && echo "type commit" >>sig && echo "tag mytag" >>sig && echo "tagger $(git var GIT_COMMITTER_IDENT)" >>sig && echo >>sig && echo "our test tag" >>sig && - tag=`git mktag <sig` && + tag=$(git mktag <sig) && rm d sig && git update-ref refs/tags/mytag $tag && { echo $tree && @@ -25,58 +25,94 @@ test_expect_success setup ' } >obj-list ' -rm -rf clone.git test_expect_success 'pack without --include-tag' ' - packname_1=$(git pack-objects \ + packname=$(git pack-objects \ --window=0 \ - test-1 <obj-list) + test-no-include <obj-list) ' test_expect_success 'unpack objects' ' - ( - GIT_DIR=clone.git && - export GIT_DIR && - git init && - git unpack-objects -n <test-1-${packname_1}.pack && - git unpack-objects <test-1-${packname_1}.pack - ) + rm -rf clone.git && + git init clone.git && + git -C clone.git unpack-objects <test-no-include-${packname}.pack ' test_expect_success 'check unpacked result (have commit, no tag)' ' git rev-list --objects $commit >list.expect && - ( - test_must_fail env GIT_DIR=clone.git git cat-file -e $tag && - git rev-list --objects $commit - ) >list.actual && + test_must_fail git -C clone.git cat-file -e $tag && + git -C clone.git rev-list --objects $commit >list.actual && test_cmp list.expect list.actual ' -rm -rf clone.git test_expect_success 'pack with --include-tag' ' - packname_1=$(git pack-objects \ + packname=$(git pack-objects \ --window=0 \ --include-tag \ - test-2 <obj-list) + test-include <obj-list) ' test_expect_success 'unpack objects' ' - ( - GIT_DIR=clone.git && - export GIT_DIR && - git init && - git unpack-objects -n <test-2-${packname_1}.pack && - git unpack-objects <test-2-${packname_1}.pack - ) + rm -rf clone.git && + git init clone.git && + git -C clone.git unpack-objects <test-include-${packname}.pack ' test_expect_success 'check unpacked result (have commit, have tag)' ' git rev-list --objects mytag >list.expect && - ( - GIT_DIR=clone.git && - export GIT_DIR && - git rev-list --objects $tag - ) >list.actual && + git -C clone.git rev-list --objects $tag >list.actual && test_cmp list.expect list.actual ' +# A tag of a tag, where the "inner" tag is not otherwise +# reachable, and a full peel points to a commit reachable from HEAD. +test_expect_success 'create hidden inner tag' ' + test_commit commit && + git tag -m inner inner HEAD && + git tag -m outer outer inner && + git tag -d inner +' + +test_expect_success 'pack explicit outer tag' ' + packname=$( + { + echo HEAD && + echo outer + } | + git pack-objects --revs test-hidden-explicit + ) +' + +test_expect_success 'unpack objects' ' + rm -rf clone.git && + git init clone.git && + git -C clone.git unpack-objects <test-hidden-explicit-${packname}.pack +' + +test_expect_success 'check unpacked result (have all objects)' ' + git -C clone.git rev-list --objects $(git rev-parse outer HEAD) +' + +test_expect_success 'pack implied outer tag' ' + packname=$( + echo HEAD | + git pack-objects --revs --include-tag test-hidden-implied + ) +' + +test_expect_success 'unpack objects' ' + rm -rf clone.git && + git init clone.git && + git -C clone.git unpack-objects <test-hidden-implied-${packname}.pack +' + +test_expect_success 'check unpacked result (have all objects)' ' + git -C clone.git rev-list --objects $(git rev-parse outer HEAD) +' + +test_expect_success 'single-branch clone can transfer tag' ' + rm -rf clone.git && + git clone --no-local --single-branch -b master . clone.git && + git -C clone.git fsck +' + test_done diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index 6003490192..424bec7d77 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -7,6 +7,18 @@ objpath () { echo ".git/objects/$(echo "$1" | sed -e 's|\(..\)|\1/|')" } +# show objects present in pack ($1 should be associated *.idx) +list_packed_objects () { + git show-index <"$1" | cut -d' ' -f2 +} + +# has_any pattern-file content-file +# tests whether content-file has any entry from pattern-file with entries being +# whole lines. +has_any () { + grep -Ff "$1" "$2" +} + test_expect_success 'setup repo with moderate-sized history' ' for i in $(test_seq 1 10); do test_commit $i @@ -16,6 +28,7 @@ test_expect_success 'setup repo with moderate-sized history' ' test_commit side-$i done && git checkout master && + bitmaptip=$(git rev-parse master) && blob=$(echo tagged-blob | git hash-object -w --stdin) && git tag tagged-blob $blob && git config repack.writebitmaps true && @@ -47,12 +60,24 @@ rev_list_tests() { test_cmp expect actual ' + test_expect_success "counting commits with limit ($state)" ' + git rev-list --count -n 1 HEAD >expect && + git rev-list --use-bitmap-index --count -n 1 HEAD >actual && + test_cmp expect actual + ' + test_expect_success "counting non-linear history ($state)" ' git rev-list --count other...master >expect && git rev-list --use-bitmap-index --count other...master >actual && test_cmp expect actual ' + test_expect_success "counting commits with limiting ($state)" ' + git rev-list --count HEAD -- 1.t >expect && + git rev-list --use-bitmap-index --count HEAD -- 1.t >actual && + test_cmp expect actual + ' + test_expect_success "enumerate --objects ($state)" ' git rev-list --objects --use-bitmap-index HEAD >tmp && cut -d" " -f1 <tmp >tmp2 && @@ -93,12 +118,10 @@ test_expect_success 'fetch (partial bitmap)' ' test_cmp expect actual ' -test_expect_success 'incremental repack cannot create bitmaps' ' +test_expect_success 'incremental repack fails when bitmaps are requested' ' test_commit more-1 && - find .git/objects/pack -name "*.bitmap" >expect && - git repack -d && - find .git/objects/pack -name "*.bitmap" >actual && - test_cmp expect actual + test_must_fail git repack -d 2>err && + test_i18ngrep "Incremental repacks are incompatible with bitmap" err ' test_expect_success 'incremental repack can disable bitmaps' ' @@ -106,6 +129,83 @@ test_expect_success 'incremental repack can disable bitmaps' ' git repack -d --no-write-bitmap-index ' +test_expect_success 'pack-objects respects --local (non-local loose)' ' + git init --bare alt.git && + echo $(pwd)/alt.git/objects >.git/objects/info/alternates && + echo content1 >file1 && + # non-local loose object which is not present in bitmapped pack + altblob=$(GIT_DIR=alt.git git hash-object -w file1) && + # non-local loose object which is also present in bitmapped pack + git cat-file blob $blob | GIT_DIR=alt.git git hash-object -w --stdin && + git add file1 && + test_tick && + git commit -m commit_file1 && + echo HEAD | git pack-objects --local --stdout --revs >1.pack && + git index-pack 1.pack && + list_packed_objects 1.idx >1.objects && + printf "%s\n" "$altblob" "$blob" >nonlocal-loose && + ! has_any nonlocal-loose 1.objects +' + +test_expect_success 'pack-objects respects --honor-pack-keep (local non-bitmapped pack)' ' + echo content2 >file2 && + blob2=$(git hash-object -w file2) && + git add file2 && + test_tick && + git commit -m commit_file2 && + printf "%s\n" "$blob2" "$bitmaptip" >keepobjects && + pack2=$(git pack-objects pack2 <keepobjects) && + mv pack2-$pack2.* .git/objects/pack/ && + >.git/objects/pack/pack2-$pack2.keep && + rm $(objpath $blob2) && + echo HEAD | git pack-objects --honor-pack-keep --stdout --revs >2a.pack && + git index-pack 2a.pack && + list_packed_objects 2a.idx >2a.objects && + ! has_any keepobjects 2a.objects +' + +test_expect_success 'pack-objects respects --local (non-local pack)' ' + mv .git/objects/pack/pack2-$pack2.* alt.git/objects/pack/ && + echo HEAD | git pack-objects --local --stdout --revs >2b.pack && + git index-pack 2b.pack && + list_packed_objects 2b.idx >2b.objects && + ! has_any keepobjects 2b.objects +' + +test_expect_success 'pack-objects respects --honor-pack-keep (local bitmapped pack)' ' + ls .git/objects/pack/ | grep bitmap >output && + test_line_count = 1 output && + packbitmap=$(basename $(cat output) .bitmap) && + list_packed_objects .git/objects/pack/$packbitmap.idx >packbitmap.objects && + test_when_finished "rm -f .git/objects/pack/$packbitmap.keep" && + >.git/objects/pack/$packbitmap.keep && + echo HEAD | git pack-objects --honor-pack-keep --stdout --revs >3a.pack && + git index-pack 3a.pack && + list_packed_objects 3a.idx >3a.objects && + ! has_any packbitmap.objects 3a.objects +' + +test_expect_success 'pack-objects respects --local (non-local bitmapped pack)' ' + mv .git/objects/pack/$packbitmap.* alt.git/objects/pack/ && + test_when_finished "mv alt.git/objects/pack/$packbitmap.* .git/objects/pack/" && + echo HEAD | git pack-objects --local --stdout --revs >3b.pack && + git index-pack 3b.pack && + list_packed_objects 3b.idx >3b.objects && + ! has_any packbitmap.objects 3b.objects +' + +test_expect_success 'pack-objects to file can use bitmap' ' + # make sure we still have 1 bitmap index from previous tests + ls .git/objects/pack/ | grep bitmap >output && + test_line_count = 1 output && + # verify equivalent packs are generated with/without using bitmap index + packasha1=$(git pack-objects --no-use-bitmap-index --all packa </dev/null) && + packbsha1=$(git pack-objects --use-bitmap-index --all packb </dev/null) && + list_packed_objects <packa-$packasha1.idx >packa.objects && + list_packed_objects <packb-$packbsha1.idx >packb.objects && + test_cmp packa.objects packb.objects +' + test_expect_success 'full repack, reusing previous bitmaps' ' git repack -ad && ls .git/objects/pack/ | grep bitmap >output && @@ -131,6 +231,20 @@ test_expect_success 'create objects for missing-HAVE tests' ' EOF ' +test_expect_success 'pack-objects respects --incremental' ' + cat >revs2 <<-EOF && + HEAD + $commit + EOF + git pack-objects --incremental --stdout --revs <revs2 >4.pack && + git index-pack 4.pack && + list_packed_objects 4.idx >4.objects && + test_line_count = 4 4.objects && + git rev-list --objects $commit >revlist && + cut -d" " -f1 revlist |sort >objects && + test_cmp 4.objects objects +' + test_expect_success 'pack with missing blob' ' rm $(objpath $blob) && git pack-objects --stdout --revs <revs >/dev/null @@ -146,10 +260,6 @@ test_expect_success 'pack with missing parent' ' git pack-objects --stdout --revs <revs >/dev/null ' -test_lazy_prereq JGIT ' - type jgit -' - test_expect_success JGIT 'we can read jgit bitmaps' ' git clone . compat-jgit && ( diff --git a/t/t5312-prune-corruption.sh b/t/t5312-prune-corruption.sh index 8e98b44083..da9d59940d 100755 --- a/t/t5312-prune-corruption.sh +++ b/t/t5312-prune-corruption.sh @@ -12,7 +12,7 @@ delete objects that cannot be recovered. test_expect_success 'disable reflogs' ' git config core.logallrefupdates false && - rm -rf .git/logs + git reflog expire --expire=all --all ' test_expect_success 'create history reachable only from a bogus-named ref' ' diff --git a/t/t5313-pack-bounds-checks.sh b/t/t5313-pack-bounds-checks.sh new file mode 100755 index 0000000000..a8a587abc3 --- /dev/null +++ b/t/t5313-pack-bounds-checks.sh @@ -0,0 +1,179 @@ +#!/bin/sh + +test_description='bounds-checking of access to mmapped on-disk file formats' +. ./test-lib.sh + +clear_base () { + test_when_finished 'restore_base' && + rm -f $base +} + +restore_base () { + cp base-backup/* .git/objects/pack/ +} + +do_pack () { + pack_objects=$1; shift + sha1=$( + for i in $pack_objects + do + echo $i + done | git pack-objects "$@" .git/objects/pack/pack + ) && + pack=.git/objects/pack/pack-$sha1.pack && + idx=.git/objects/pack/pack-$sha1.idx && + chmod +w $pack $idx && + test_when_finished 'rm -f "$pack" "$idx"' +} + +munge () { + printf "$3" | dd of="$1" bs=1 conv=notrunc seek=$2 +} + +# Offset in a v2 .idx to its initial and extended offset tables. For an index +# with "nr" objects, this is: +# +# magic(4) + version(4) + fan-out(4*256) + sha1s(20*nr) + crc(4*nr), +# +# for the initial, and another ofs(4*nr) past that for the extended. +# +ofs_table () { + echo $((4 + 4 + 4*256 + 20*$1 + 4*$1)) +} +extended_table () { + echo $(($(ofs_table "$1") + 4*$1)) +} + +test_expect_success 'set up base packfile and variables' ' + # the hash of this content starts with ff, which + # makes some later computations much simpler + echo 74 >file && + git add file && + git commit -m base && + git repack -ad && + base=$(echo .git/objects/pack/*) && + chmod +w $base && + mkdir base-backup && + cp $base base-backup/ && + object=$(git rev-parse HEAD:file) +' + +test_expect_success 'pack/index object count mismatch' ' + do_pack $object && + munge $pack 8 "\377\0\0\0" && + clear_base && + + # We enumerate the objects from the completely-fine + # .idx, but notice later that the .pack is bogus + # and fail to show any data. + echo "$object missing" >expect && + git cat-file --batch-all-objects --batch-check >actual && + test_cmp expect actual && + + # ...and here fail to load the object (without segfaulting), + # but fallback to a good copy if available. + test_must_fail git cat-file blob $object && + restore_base && + git cat-file blob $object >actual && + test_cmp file actual && + + # ...and make sure that index-pack --verify, which has its + # own reading routines, does not segfault. + test_must_fail git index-pack --verify $pack +' + +test_expect_success 'matched bogus object count' ' + do_pack $object && + munge $pack 8 "\377\0\0\0" && + munge $idx $((255 * 4)) "\377\0\0\0" && + clear_base && + + # Unlike above, we should notice early that the .idx is totally + # bogus, and not even enumerate its contents. + >expect && + git cat-file --batch-all-objects --batch-check >actual && + test_cmp expect actual && + + # But as before, we can do the same object-access checks. + test_must_fail git cat-file blob $object && + restore_base && + git cat-file blob $object >actual && + test_cmp file actual && + + test_must_fail git index-pack --verify $pack +' + +# Note that we cannot check the fallback case for these +# further .idx tests, as we notice the problem in functions +# whose interface doesn't allow an error return (like use_pack()), +# and thus we just die(). +# +# There's also no point in doing enumeration tests, as +# we are munging offsets here, which are about looking up +# specific objects. + +test_expect_success 'bogus object offset (v1)' ' + do_pack $object --index-version=1 && + munge $idx $((4 * 256)) "\377\0\0\0" && + clear_base && + test_must_fail git cat-file blob $object && + test_must_fail git index-pack --verify $pack +' + +test_expect_success 'bogus object offset (v2, no msb)' ' + do_pack $object --index-version=2 && + munge $idx $(ofs_table 1) "\0\377\0\0" && + clear_base && + test_must_fail git cat-file blob $object && + test_must_fail git index-pack --verify $pack +' + +test_expect_success 'bogus offset into v2 extended table' ' + do_pack $object --index-version=2 && + munge $idx $(ofs_table 1) "\377\0\0\0" && + clear_base && + test_must_fail git cat-file blob $object && + test_must_fail git index-pack --verify $pack +' + +test_expect_success 'bogus offset inside v2 extended table' ' + # We need two objects here, so we can plausibly require + # an extended table (if the first object were larger than 2^31). + do_pack "$object $(git rev-parse HEAD)" --index-version=2 && + + # We have to make extra room for the table, so we cannot + # just munge in place as usual. + { + dd if=$idx bs=1 count=$(($(ofs_table 2) + 4)) && + printf "\200\0\0\0" && + printf "\377\0\0\0\0\0\0\0" && + dd if=$idx bs=1 skip=$(extended_table 2) + } >tmp && + mv tmp "$idx" && + clear_base && + test_must_fail git cat-file blob $object && + test_must_fail git index-pack --verify $pack +' + +test_expect_success 'bogus OFS_DELTA in packfile' ' + # Generate a pack with a delta in it. + base=$(test-genrandom foo 3000 | git hash-object --stdin -w) && + delta=$(test-genrandom foo 2000 | git hash-object --stdin -w) && + do_pack "$base $delta" --delta-base-offset && + rm -f .git/objects/??/* && + + # Double check that we have the delta we expect. + echo $base >expect && + echo $delta | git cat-file --batch-check="%(deltabase)" >actual && + test_cmp expect actual && + + # Now corrupt it. We assume the varint size for the delta is small + # enough to fit in the first byte (which it should be, since it + # is a pure deletion from the base), and that original ofs_delta + # takes 2 bytes (which it should, as it should be ~3000). + ofs=$(git show-index <$idx | grep $delta | cut -d" " -f1) && + munge $pack $(($ofs + 1)) "\177\377" && + test_must_fail git cat-file blob $delta >/dev/null +' + +test_done diff --git a/t/t5314-pack-cycle-detection.sh b/t/t5314-pack-cycle-detection.sh new file mode 100755 index 0000000000..f7dbdfb412 --- /dev/null +++ b/t/t5314-pack-cycle-detection.sh @@ -0,0 +1,113 @@ +#!/bin/sh + +test_description='test handling of inter-pack delta cycles during repack + +The goal here is to create a situation where we have two blobs, A and B, with A +as a delta against B in one pack, and vice versa in the other. Then if we can +persuade a full repack to find A from one pack and B from the other, that will +give us a cycle when we attempt to reuse those deltas. + +The trick is in the "persuade" step, as it depends on the internals of how +pack-objects picks which pack to reuse the deltas from. But we can assume +that it does so in one of two general strategies: + + 1. Using a static ordering of packs. In this case, no inter-pack cycles can + happen. Any objects with a delta relationship must be present in the same + pack (i.e., no "--thin" packs on disk), so we will find all related objects + from that pack. So assuming there are no cycles within a single pack (and + we avoid generating them via pack-objects or importing them via + index-pack), then our result will have no cycles. + + So this case should pass the tests no matter how we arrange things. + + 2. Picking the next pack to examine based on locality (i.e., where we found + something else recently). + + In this case, we want to make sure that we find the delta versions of A and + B and not their base versions. We can do this by putting two blobs in each + pack. The first is a "dummy" blob that can only be found in the pack in + question. And then the second is the actual delta we want to find. + + The two blobs must be present in the same tree, not present in other trees, + and the dummy pathname must sort before the delta path. + +The setup below focuses on case 2. We have two commits HEAD and HEAD^, each +which has two files: "dummy" and "file". Then we can make two packs which +contain: + + [pack one] + HEAD:dummy + HEAD:file (as delta against HEAD^:file) + HEAD^:file (as base) + + [pack two] + HEAD^:dummy + HEAD^:file (as delta against HEAD:file) + HEAD:file (as base) + +Then no matter which order we start looking at the packs in, we know that we +will always find a delta for "file", because its lookup will always come +immediately after the lookup for "dummy". +' +. ./test-lib.sh + + + +# Create a pack containing the the tree $1 and blob $1:file, with +# the latter stored as a delta against $2:file. +# +# We convince pack-objects to make the delta in the direction of our choosing +# by marking $2 as a preferred-base edge. That results in $1:file as a thin +# delta, and index-pack completes it by adding $2:file as a base. +# +# Note that the two variants of "file" must be similar enough to convince git +# to create the delta. +make_pack () { + { + printf '%s\n' "-$(git rev-parse $2)" + printf '%s dummy\n' "$(git rev-parse $1:dummy)" + printf '%s file\n' "$(git rev-parse $1:file)" + } | + git pack-objects --stdout | + git index-pack --stdin --fix-thin +} + +test_expect_success 'setup' ' + test-genrandom base 4096 >base && + for i in one two + do + # we want shared content here to encourage deltas... + cp base file && + echo $i >>file && + + # ...whereas dummy should be short, because we do not want + # deltas that would create duplicates when we --fix-thin + echo $i >dummy && + + git add file dummy && + test_tick && + git commit -m $i || + return 1 + done && + + make_pack HEAD^ HEAD && + make_pack HEAD HEAD^ +' + +test_expect_success 'repack' ' + # We first want to check that we do not have any internal errors, + # and also that we do not hit the last-ditch cycle-breaking code + # in write_object(), which will issue a warning to stderr. + >expect && + git repack -ad 2>stderr && + test_cmp expect stderr && + + # And then double-check that the resulting pack is usable (i.e., + # we did not fail to notice any cycles). We know we are accessing + # the objects via the new pack here, because "repack -d" will have + # removed the others. + git cat-file blob HEAD:file >/dev/null && + git cat-file blob HEAD^:file >/dev/null +' + +test_done diff --git a/t/t5315-pack-objects-compression.sh b/t/t5315-pack-objects-compression.sh new file mode 100755 index 0000000000..34c47dae09 --- /dev/null +++ b/t/t5315-pack-objects-compression.sh @@ -0,0 +1,44 @@ +#!/bin/sh + +test_description='pack-object compression configuration' + +. ./test-lib.sh + +# This should be moved to test-lib.sh together with the +# copy in t0021 after both topics have graduated to 'master'. +file_size () { + perl -e 'print -s $ARGV[0]' "$1" +} + +test_expect_success setup ' + printf "%2000000s" X | + git hash-object -w --stdin >object-name && + # make sure it resulted in a loose object + ob=$(sed -e "s/\(..\).*/\1/" object-name) && + ject=$(sed -e "s/..\(.*\)/\1/" object-name) && + test -f .git/objects/$ob/$ject +' + +while read expect config +do + test_expect_success "pack-objects with $config" ' + test_when_finished "rm -f pack-*.*" && + git $config pack-objects pack <object-name && + sz=$(file_size pack-*.pack) && + case "$expect" in + small) test "$sz" -le 100000 ;; + large) test "$sz" -ge 100000 ;; + esac + ' +done <<\EOF +large -c core.compression=0 +small -c core.compression=9 +large -c core.compression=0 -c pack.compression=0 +large -c core.compression=9 -c pack.compression=0 +small -c core.compression=0 -c pack.compression=9 +small -c core.compression=9 -c pack.compression=9 +large -c pack.compression=0 +small -c pack.compression=9 +EOF + +test_done diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index 04cea97f87..305ca7a930 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -128,6 +128,18 @@ test_expect_success 'denyNonFastforwards trumps --force' ' test "$victim_orig" = "$victim_head" ' +test_expect_success 'send-pack --all sends all branches' ' + # make sure we have at least 2 branches with different + # values, just to be thorough + git branch other-branch HEAD^ && + + git init --bare all.git && + git send-pack --all all.git && + git for-each-ref refs/heads >expect && + git -C all.git for-each-ref refs/heads >actual && + test_cmp expect actual +' + test_expect_success 'push --all excludes remote-tracking hierarchy' ' mkdir parent && ( diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 3a9b77576f..505e1b4a7f 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -14,7 +14,7 @@ test_description='Testing multi_ack pack fetching' add () { name=$1 && text="$@" && - branch=`echo $name | sed -e 's/^\(.\).*$/\1/'` && + branch=$(echo $name | sed -e 's/^\(.\).*$/\1/') && parents="" && shift && @@ -50,18 +50,18 @@ pull_to_client () { case "$heads" in *B*) echo $BTIP > .git/refs/heads/B;; esac && - git symbolic-ref HEAD refs/heads/`echo $heads \ - | sed -e "s/^\(.\).*$/\1/"` && + git symbolic-ref HEAD refs/heads/$(echo $heads \ + | sed -e "s/^\(.\).*$/\1/") && git fsck --full && mv .git/objects/pack/pack-* . && - p=`ls -1 pack-*.pack` && + p=$(ls -1 pack-*.pack) && git unpack-objects <$p && git fsck --full && - idx=`echo pack-*.idx` && - pack_count=`git show-index <$idx | wc -l` && + idx=$(echo pack-*.idx) && + pack_count=$(git show-index <$idx | wc -l) && test $pack_count = $count && rm -f pack-* ) @@ -132,13 +132,13 @@ test_expect_success 'single given branch clone' ' test_expect_success 'clone shallow depth 1' ' git clone --no-single-branch --depth 1 "file://$(pwd)/." shallow0 && - test "`git --git-dir=shallow0/.git rev-list --count HEAD`" = 1 + test "$(git --git-dir=shallow0/.git rev-list --count HEAD)" = 1 ' test_expect_success 'clone shallow depth 1 with fsck' ' git config --global fetch.fsckobjects true && git clone --no-single-branch --depth 1 "file://$(pwd)/." shallow0fsck && - test "`git --git-dir=shallow0fsck/.git rev-list --count HEAD`" = 1 && + test "$(git --git-dir=shallow0fsck/.git rev-list --count HEAD)" = 1 && git config --global --unset fetch.fsckobjects ' @@ -147,7 +147,7 @@ test_expect_success 'clone shallow' ' ' test_expect_success 'clone shallow depth count' ' - test "`git --git-dir=shallow/.git rev-list --count HEAD`" = 2 + test "$(git --git-dir=shallow/.git rev-list --count HEAD)" = 2 ' test_expect_success 'clone shallow object count' ' @@ -259,7 +259,8 @@ test_expect_success 'clone shallow object count' ' test_expect_success 'pull in shallow repo with missing merge base' ' ( cd shallow && - test_must_fail git pull --depth 4 .. A + git fetch --depth 4 .. A + test_must_fail git merge --allow-unrelated-histories FETCH_HEAD ) ' @@ -273,15 +274,16 @@ test_expect_success 'additional simple shallow deepenings' ' ' test_expect_success 'clone shallow depth count' ' - test "`git --git-dir=shallow/.git rev-list --count HEAD`" = 11 + test "$(git --git-dir=shallow/.git rev-list --count HEAD)" = 11 ' test_expect_success 'clone shallow object count' ' ( cd shallow && + git prune && git count-objects -v ) > count.shallow && - grep "^count: 55" count.shallow + grep "^count: 54" count.shallow ' test_expect_success 'fetch --no-shallow on full repo' ' @@ -531,6 +533,20 @@ test_expect_success 'shallow fetch with tags does not break the repository' ' git fsck ) ' + +test_expect_success 'fetch-pack can fetch a raw sha1' ' + git init hidden && + ( + cd hidden && + test_commit 1 && + test_commit 2 && + git update-ref refs/hidden/one HEAD^ && + git config transfer.hiderefs refs/hidden && + git config uploadpack.allowtipsha1inwant true + ) && + git fetch-pack hidden $(git -C hidden rev-parse refs/hidden/one) +' + check_prot_path () { cat >expected <<-EOF && Diag: url=$1 @@ -542,7 +558,6 @@ check_prot_path () { } check_prot_host_port_path () { - local diagport case "$2" in *ssh*) pp=ssh @@ -637,4 +652,72 @@ test_expect_success MINGW 'fetch-pack --diag-url c:repo' ' check_prot_path c:repo file c:repo ' +test_expect_success 'clone shallow since ...' ' + test_create_repo shallow-since && + ( + cd shallow-since && + GIT_COMMITTER_DATE="100000000 +0700" git commit --allow-empty -m one && + GIT_COMMITTER_DATE="200000000 +0700" git commit --allow-empty -m two && + GIT_COMMITTER_DATE="300000000 +0700" git commit --allow-empty -m three && + git clone --shallow-since "300000000 +0700" "file://$(pwd)/." ../shallow11 && + git -C ../shallow11 log --pretty=tformat:%s HEAD >actual && + echo three >expected && + test_cmp expected actual + ) +' + +test_expect_success 'fetch shallow since ...' ' + git -C shallow11 fetch --shallow-since "200000000 +0700" origin && + git -C shallow11 log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + three + two + EOF + test_cmp expected actual +' + +test_expect_success 'shallow clone exclude tag two' ' + test_create_repo shallow-exclude && + ( + cd shallow-exclude && + test_commit one && + test_commit two && + test_commit three && + git clone --shallow-exclude two "file://$(pwd)/." ../shallow12 && + git -C ../shallow12 log --pretty=tformat:%s HEAD >actual && + echo three >expected && + test_cmp expected actual + ) +' + +test_expect_success 'fetch exclude tag one' ' + git -C shallow12 fetch --shallow-exclude one origin && + git -C shallow12 log --pretty=tformat:%s origin/master >actual && + test_write_lines three two >expected && + test_cmp expected actual +' + +test_expect_success 'fetching deepen' ' + test_create_repo shallow-deepen && + ( + cd shallow-deepen && + test_commit one && + test_commit two && + test_commit three && + git clone --depth 1 "file://$(pwd)/." deepen && + test_commit four && + git -C deepen log --pretty=tformat:%s master >actual && + echo three >expected && + test_cmp expected actual && + git -C deepen fetch --deepen=1 && + git -C deepen log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + four + three + two + EOF + test_cmp expected actual + ) +' + test_done diff --git a/t/t5504-fetch-receive-strict.sh b/t/t5504-fetch-receive-strict.sh index 69ee13c8be..49d3621a92 100755 --- a/t/t5504-fetch-receive-strict.sh +++ b/t/t5504-fetch-receive-strict.sh @@ -115,4 +115,55 @@ test_expect_success 'push with transfer.fsckobjects' ' test_cmp exp act ' +cat >bogus-commit <<EOF +tree $EMPTY_TREE +author Bugs Bunny 1234567890 +0000 +committer Bugs Bunny <bugs@bun.ni> 1234567890 +0000 + +This commit object intentionally broken +EOF + +test_expect_success 'push with receive.fsck.skipList' ' + commit="$(git hash-object -t commit -w --stdin <bogus-commit)" && + git push . $commit:refs/heads/bogus && + rm -rf dst && + git init dst && + git --git-dir=dst/.git config receive.fsckObjects true && + test_must_fail git push --porcelain dst bogus && + git --git-dir=dst/.git config receive.fsck.skipList SKIP && + echo $commit >dst/.git/SKIP && + git push --porcelain dst bogus +' + +test_expect_success 'push with receive.fsck.missingEmail=warn' ' + commit="$(git hash-object -t commit -w --stdin <bogus-commit)" && + git push . $commit:refs/heads/bogus && + rm -rf dst && + git init dst && + git --git-dir=dst/.git config receive.fsckobjects true && + test_must_fail git push --porcelain dst bogus && + git --git-dir=dst/.git config \ + receive.fsck.missingEmail warn && + git push --porcelain dst bogus >act 2>&1 && + grep "missingEmail" act && + git --git-dir=dst/.git branch -D bogus && + git --git-dir=dst/.git config --add \ + receive.fsck.missingEmail ignore && + git --git-dir=dst/.git config --add \ + receive.fsck.badDate warn && + git push --porcelain dst bogus >act 2>&1 && + ! grep "missingEmail" act +' + +test_expect_success \ + 'receive.fsck.unterminatedHeader=warn triggers error' ' + rm -rf dst && + git init dst && + git --git-dir=dst/.git config receive.fsckobjects true && + git --git-dir=dst/.git config \ + receive.fsck.unterminatedheader warn && + test_must_fail git push --porcelain dst HEAD >act 2>&1 && + grep "Cannot demote unterminatedheader" act +' + test_done diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index 7a8499ce66..8198d8eb05 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -51,6 +51,11 @@ test_expect_success setup ' git clone one test ' +test_expect_success 'add remote whose URL agrees with url.<...>.insteadOf' ' + test_config url.git@host.com:team/repo.git.insteadOf myremote && + git remote add myremote git@host.com:team/repo.git +' + test_expect_success C_LOCALE_OUTPUT 'remote information for the origin' ' ( cd test && @@ -85,7 +90,7 @@ test_expect_success C_LOCALE_OUTPUT 'check remote-tracking' ' test_expect_success 'remote forces tracking branches' ' ( cd test && - case `git config remote.second.fetch` in + case $(git config remote.second.fetch) in +*) true ;; *) false ;; esac @@ -139,6 +144,39 @@ test_expect_success 'remove remote protects local branches' ' ) ' +test_expect_success 'remove errors out early when deleting non-existent branch' ' + ( + cd test && + echo "fatal: No such remote: foo" >expect && + test_must_fail git remote rm foo 2>actual && + test_i18ncmp expect actual + ) +' + +test_expect_success 'rename errors out early when deleting non-existent branch' ' + ( + cd test && + echo "fatal: No such remote: foo" >expect && + test_must_fail git remote rename foo bar 2>actual && + test_i18ncmp expect actual + ) +' + +test_expect_success 'add existing foreign_vcs remote' ' + test_config remote.foo.vcs bar && + echo "fatal: remote foo already exists." >expect && + test_must_fail git remote add foo bar 2>actual && + test_i18ncmp expect actual +' + +test_expect_success 'add existing foreign_vcs remote' ' + test_config remote.foo.vcs bar && + test_config remote.bar.vcs bar && + echo "fatal: remote bar already exists." >expect && + test_must_fail git remote rename foo bar 2>actual && + test_i18ncmp expect actual +' + cat >test/expect <<EOF * remote origin Fetch URL: $(pwd)/one @@ -919,6 +957,28 @@ test_expect_success 'new remote' ' cmp expect actual ' +get_url_test () { + cat >expect && + git remote get-url "$@" >actual && + test_cmp expect actual +} + +test_expect_success 'get-url on new remote' ' + echo foo | get_url_test someremote && + echo foo | get_url_test --all someremote && + echo foo | get_url_test --push someremote && + echo foo | get_url_test --push --all someremote +' + +test_expect_success 'remote set-url with locked config' ' + test_when_finished "rm -f .git/config.lock" && + git config --get-all remote.someremote.url >expect && + >.git/config.lock && + test_must_fail git remote set-url someremote baz && + git config --get-all remote.someremote.url >actual && + cmp expect actual +' + test_expect_success 'remote set-url bar' ' git remote set-url someremote bar && echo bar >expect && @@ -961,6 +1021,13 @@ test_expect_success 'remote set-url --push zot' ' cmp expect actual ' +test_expect_success 'get-url with different urls' ' + echo baz | get_url_test someremote && + echo baz | get_url_test --all someremote && + echo zot | get_url_test --push someremote && + echo zot | get_url_test --push --all someremote +' + test_expect_success 'remote set-url --push qux zot' ' git remote set-url --push someremote qux zot && echo qux >expect && @@ -995,6 +1062,14 @@ test_expect_success 'remote set-url --push --add aaa' ' cmp expect actual ' +test_expect_success 'get-url on multi push remote' ' + echo foo | get_url_test --push someremote && + get_url_test --push --all someremote <<-\EOF + foo + aaa + EOF +' + test_expect_success 'remote set-url --push bar aaa' ' git remote set-url --push someremote bar aaa && echo foo >expect && @@ -1039,6 +1114,14 @@ test_expect_success 'remote set-url --add bbb' ' cmp expect actual ' +test_expect_success 'get-url on multi fetch remote' ' + echo baz | get_url_test someremote && + get_url_test --all someremote <<-\EOF + baz + bbb + EOF +' + test_expect_success 'remote set-url --delete .*' ' test_must_fail git remote set-url --delete someremote .\* && echo "YYY" >expect && @@ -1099,7 +1182,7 @@ test_expect_success 'extra args: setup' ' test_extra_arg () { test_expect_success "extra args: $*" " test_must_fail git remote $* bogus_extra_arg 2>actual && - grep '^usage:' actual + test_i18ngrep '^usage:' actual " } @@ -1108,6 +1191,7 @@ test_extra_arg rename origin newname test_extra_arg remove origin test_extra_arg set-head origin master # set-branches takes any number of args +test_extra_arg get-url origin newurl test_extra_arg set-url origin newurl oldurl # show takes any number of args # prune takes any number of args diff --git a/t/t5506-remote-groups.sh b/t/t5506-remote-groups.sh index 530b01678e..83d5558c0e 100755 --- a/t/t5506-remote-groups.sh +++ b/t/t5506-remote-groups.sh @@ -20,7 +20,7 @@ update_repos() { } repo_fetched() { - if test "`git log -1 --pretty=format:%s $1 --`" = "`cat mark`"; then + if test "$(git log -1 --pretty=format:%s $1 --)" = "$(cat mark)"; then echo >&2 "repo was fetched: $1" return 0 fi diff --git a/t/t5507-remote-environment.sh b/t/t5507-remote-environment.sh new file mode 100755 index 0000000000..e6149295b1 --- /dev/null +++ b/t/t5507-remote-environment.sh @@ -0,0 +1,34 @@ +#!/bin/sh + +test_description='check environment showed to remote side of transports' +. ./test-lib.sh + +test_expect_success 'set up "remote" push situation' ' + test_commit one && + git config push.default current && + git init remote +' + +test_expect_success 'set up fake ssh' ' + GIT_SSH_COMMAND="f() { + cd \"\$TRASH_DIRECTORY\" && + eval \"\$2\" + }; f" && + export GIT_SSH_COMMAND && + export TRASH_DIRECTORY +' + +# due to receive.denyCurrentBranch=true +test_expect_success 'confirm default push fails' ' + test_must_fail git push remote +' + +test_expect_success 'config does not travel over same-machine push' ' + test_must_fail git -c receive.denyCurrentBranch=false push remote +' + +test_expect_success 'config does not travel over ssh push' ' + test_must_fail git -c receive.denyCurrentBranch=false push host:remote +' + +test_done diff --git a/t/t5509-fetch-push-namespaces.sh b/t/t5509-fetch-push-namespaces.sh index cc0b31f6b0..75c570adca 100755 --- a/t/t5509-fetch-push-namespaces.sh +++ b/t/t5509-fetch-push-namespaces.sh @@ -4,6 +4,7 @@ test_description='fetch/push involving ref namespaces' . ./test-lib.sh test_expect_success setup ' + git config --global protocol.ext.allow user && test_tick && git init original && ( @@ -82,4 +83,45 @@ test_expect_success 'mirroring a repository using a ref namespace' ' ) ' +test_expect_success 'hide namespaced refs with transfer.hideRefs' ' + GIT_NAMESPACE=namespace \ + git -C pushee -c transfer.hideRefs=refs/tags \ + ls-remote "ext::git %s ." >actual && + printf "$commit1\trefs/heads/master\n" >expected && + test_cmp expected actual +' + +test_expect_success 'check that transfer.hideRefs does not match unstripped refs' ' + GIT_NAMESPACE=namespace \ + git -C pushee -c transfer.hideRefs=refs/namespaces/namespace/refs/tags \ + ls-remote "ext::git %s ." >actual && + printf "$commit1\trefs/heads/master\n" >expected && + printf "$commit0\trefs/tags/0\n" >>expected && + printf "$commit1\trefs/tags/1\n" >>expected && + test_cmp expected actual +' + +test_expect_success 'hide full refs with transfer.hideRefs' ' + GIT_NAMESPACE=namespace \ + git -C pushee -c transfer.hideRefs="^refs/namespaces/namespace/refs/tags" \ + ls-remote "ext::git %s ." >actual && + printf "$commit1\trefs/heads/master\n" >expected && + test_cmp expected actual +' + +test_expect_success 'try to update a hidden ref' ' + test_config -C pushee transfer.hideRefs refs/heads/master && + test_must_fail git -C original push pushee-namespaced master +' + +test_expect_success 'try to update a ref that is not hidden' ' + test_config -C pushee transfer.hideRefs refs/namespaces/namespace/refs/heads/master && + git -C original push pushee-namespaced master +' + +test_expect_success 'try to update a hidden full ref' ' + test_config -C pushee transfer.hideRefs "^refs/namespaces/namespace/refs/heads/master" && + test_must_fail git -C original push pushee-namespaced master +' + test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 0ba9db0884..668c54be41 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -7,7 +7,7 @@ test_description='Per branch config variables affects "git fetch". . ./test-lib.sh -D=`pwd` +D=$(pwd) test_bundle_object_count () { git verify-pack -v "$1" >verify.out && @@ -64,8 +64,8 @@ test_expect_success "fetch test" ' cd two && git fetch && test -f .git/refs/heads/one && - mine=`git rev-parse refs/heads/one` && - his=`cd ../one && git rev-parse refs/heads/master` && + mine=$(git rev-parse refs/heads/one) && + his=$(cd ../one && git rev-parse refs/heads/master) && test "z$mine" = "z$his" ' @@ -75,8 +75,8 @@ test_expect_success "fetch test for-merge" ' git fetch && test -f .git/refs/heads/two && test -f .git/refs/heads/one && - master_in_two=`cd ../two && git rev-parse master` && - one_in_two=`cd ../two && git rev-parse one` && + master_in_two=$(cd ../two && git rev-parse master) && + one_in_two=$(cd ../two && git rev-parse one) && { echo "$one_in_two " echo "$master_in_two not-for-merge" @@ -314,42 +314,6 @@ test_expect_success 'bundle should be able to create a full history' ' ' -! rsync --help > /dev/null 2> /dev/null && -say 'Skipping rsync tests because rsync was not found' || { -test_expect_success 'fetch via rsync' ' - git pack-refs && - mkdir rsynced && - (cd rsynced && - git init --bare && - git fetch "rsync:../.git" master:refs/heads/master && - git gc --prune && - test $(git rev-parse master) = $(cd .. && git rev-parse master) && - git fsck --full) -' - -test_expect_success 'push via rsync' ' - mkdir rsynced2 && - (cd rsynced2 && - git init) && - (cd rsynced && - git push "rsync:../rsynced2/.git" master) && - (cd rsynced2 && - git gc --prune && - test $(git rev-parse master) = $(cd .. && git rev-parse master) && - git fsck --full) -' - -test_expect_success 'push via rsync' ' - mkdir rsynced3 && - (cd rsynced3 && - git init) && - git push --all "rsync:rsynced3/.git" && - (cd rsynced3 && - test $(git rev-parse master) = $(cd .. && git rev-parse master) && - git fsck --full) -' -} - test_expect_success 'fetch with a non-applying branch.<name>.merge' ' git config branch.master.remote yeti && git config branch.master.merge refs/heads/bigfoot && @@ -680,7 +644,7 @@ test_expect_success 'fetch --prune prints the remotes url' ' git fetch --prune origin 2>&1 | head -n1 >../actual ) && echo "From ${D}/." >expect && - test_cmp expect actual + test_i18ncmp expect actual ' test_expect_success 'branchname D/F conflict resolved by --prune' ' @@ -708,4 +672,50 @@ test_expect_success 'fetching a one-level ref works' ' ) ' +test_expect_success 'fetching with auto-gc does not lock up' ' + write_script askyesno <<-\EOF && + echo "$*" && + false + EOF + git clone "file://$D" auto-gc && + test_commit test2 && + ( + cd auto-gc && + git config gc.autoPackLimit 1 && + git config gc.autoDetach false && + GIT_ASK_YESNO="$D/askyesno" git fetch >fetch.out 2>&1 && + ! grep "Should I try again" fetch.out + ) +' + +test_expect_success C_LOCALE_OUTPUT 'fetch aligned output' ' + git clone . full-output && + test_commit looooooooooooong-tag && + ( + cd full-output && + git -c fetch.output=full fetch origin 2>&1 | \ + grep -e "->" | cut -c 22- >../actual + ) && + cat >expect <<-\EOF && + master -> origin/master + looooooooooooong-tag -> looooooooooooong-tag + EOF + test_cmp expect actual +' + +test_expect_success C_LOCALE_OUTPUT 'fetch compact output' ' + git clone . compact && + test_commit extraaa && + ( + cd compact && + git -c fetch.output=compact fetch origin 2>&1 | \ + grep -e "->" | cut -c 22- >../actual + ) && + cat >expect <<-\EOF && + master -> origin/* + extraaa -> * + EOF + test_cmp expect actual +' + test_done diff --git a/t/t5511-refspec.sh b/t/t5511-refspec.sh index de6db86ccf..f541f30bc2 100755 --- a/t/t5511-refspec.sh +++ b/t/t5511-refspec.sh @@ -71,15 +71,18 @@ test_refspec fetch ':refs/remotes/frotz/HEAD-to-me' test_refspec push ':refs/remotes/frotz/delete me' invalid test_refspec fetch ':refs/remotes/frotz/HEAD to me' invalid -test_refspec fetch 'refs/heads/*/for-linus:refs/remotes/mine/*-blah' invalid -test_refspec push 'refs/heads/*/for-linus:refs/remotes/mine/*-blah' invalid +test_refspec fetch 'refs/heads/*/for-linus:refs/remotes/mine/*-blah' +test_refspec push 'refs/heads/*/for-linus:refs/remotes/mine/*-blah' -test_refspec fetch 'refs/heads*/for-linus:refs/remotes/mine/*' invalid -test_refspec push 'refs/heads*/for-linus:refs/remotes/mine/*' invalid +test_refspec fetch 'refs/heads*/for-linus:refs/remotes/mine/*' +test_refspec push 'refs/heads*/for-linus:refs/remotes/mine/*' test_refspec fetch 'refs/heads/*/*/for-linus:refs/remotes/mine/*' invalid test_refspec push 'refs/heads/*/*/for-linus:refs/remotes/mine/*' invalid +test_refspec fetch 'refs/heads/*g*/for-linus:refs/remotes/mine/*' invalid +test_refspec push 'refs/heads/*g*/for-linus:refs/remotes/mine/*' invalid + test_refspec fetch 'refs/heads/*/for-linus:refs/remotes/mine/*' test_refspec push 'refs/heads/*/for-linus:refs/remotes/mine/*' diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 3bd9759e0f..55fc83fc06 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -99,7 +99,7 @@ test_expect_success 'confuses pattern as remote when no remote specified' ' # We could just as easily have used "master"; the "*" emphasizes its # role as a pattern. test_must_fail git ls-remote refs*master >actual 2>&1 && - test_cmp exp actual + test_i18ncmp exp actual ' test_expect_success 'die with non-2 for wrong repository even with --exit-code' ' @@ -128,6 +128,11 @@ test_expect_success 'Report match with --exit-code' ' test_cmp expect actual ' +test_expect_success 'set up some extra tags for ref hiding' ' + git tag magic/one && + git tag magic/two +' + for configsection in transfer uploadpack do test_expect_success "Hide some refs with $configsection.hiderefs" ' @@ -138,6 +143,109 @@ do sed -e "/ refs\/tags\//d" >expect && test_cmp expect actual ' + + test_expect_success "Override hiding of $configsection.hiderefs" ' + test_when_finished "test_unconfig $configsection.hiderefs" && + git config --add $configsection.hiderefs refs/tags && + git config --add $configsection.hiderefs "!refs/tags/magic" && + git config --add $configsection.hiderefs refs/tags/magic/one && + git ls-remote . >actual && + grep refs/tags/magic/two actual && + ! grep refs/tags/magic/one actual + ' + done +test_expect_success 'overrides work between mixed transfer/upload-pack hideRefs' ' + test_config uploadpack.hiderefs refs/tags && + test_config transfer.hiderefs "!refs/tags/magic" && + git ls-remote . >actual && + grep refs/tags/magic actual +' + +test_expect_success 'ls-remote --symref' ' + cat >expect <<-\EOF && + ref: refs/heads/master HEAD + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a HEAD + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/remotes/origin/HEAD + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/remotes/origin/master + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/tags/mark + EOF + git ls-remote --symref >actual && + test_cmp expect actual +' + +test_expect_success 'ls-remote with filtered symref (refname)' ' + cat >expect <<-\EOF && + ref: refs/heads/master HEAD + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a HEAD + EOF + git ls-remote --symref . HEAD >actual && + test_cmp expect actual +' + +test_expect_failure 'ls-remote with filtered symref (--heads)' ' + git symbolic-ref refs/heads/foo refs/tags/mark && + cat >expect <<-\EOF && + ref: refs/tags/mark refs/heads/foo + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/foo + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master + EOF + git ls-remote --symref --heads . >actual && + test_cmp expect actual +' + +test_expect_success 'ls-remote --symref omits filtered-out matches' ' + cat >expect <<-\EOF && + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/foo + 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master + EOF + git ls-remote --symref --heads . >actual && + test_cmp expect actual && + git ls-remote --symref . "refs/heads/*" >actual && + test_cmp expect actual +' + +test_lazy_prereq GIT_DAEMON ' + test_tristate GIT_TEST_GIT_DAEMON && + test "$GIT_TEST_GIT_DAEMON" != false +' + +# This test spawns a daemon, so run it only if the user would be OK with +# testing with git-daemon. +test_expect_success PIPE,JGIT,GIT_DAEMON 'indicate no refs in standards-compliant empty remote' ' + JGIT_DAEMON_PORT=${JGIT_DAEMON_PORT-${this_test#t}} && + JGIT_DAEMON_PID= && + git init --bare empty.git && + >empty.git/git-daemon-export-ok && + mkfifo jgit_daemon_output && + { + jgit daemon --port="$JGIT_DAEMON_PORT" . >jgit_daemon_output & + JGIT_DAEMON_PID=$! + } && + test_when_finished kill "$JGIT_DAEMON_PID" && + { + read line && + case $line in + Exporting*) + ;; + *) + echo "Expected: Exporting" && + false;; + esac && + read line && + case $line in + "Listening on"*) + ;; + *) + echo "Expected: Listening on" && + false;; + esac + } <jgit_daemon_output && + # --exit-code asks the command to exit with 2 when no + # matching refs are found. + test_expect_code 2 git ls-remote --exit-code git://localhost:$JGIT_DAEMON_PORT/empty.git +' + test_done diff --git a/t/t5515-fetch-merge-logic.sh b/t/t5515-fetch-merge-logic.sh index dbb927dec8..36b0dbc01c 100755 --- a/t/t5515-fetch-merge-logic.sh +++ b/t/t5515-fetch-merge-logic.sh @@ -128,8 +128,8 @@ do case "$cmd" in '' | '#'*) continue ;; esac - test=`echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g'` - pfx=`printf "%04d" $test_count` + test=$(echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g') + pfx=$(printf "%04d" $test_count) expect_f="$TEST_DIRECTORY/t5515/fetch.$test" actual_f="$pfx-fetch.$test" expect_r="$TEST_DIRECTORY/t5515/refs.$test" diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index ec22c98445..0fc5a7c596 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -16,7 +16,7 @@ This test checks the following functionality: . ./test-lib.sh -D=`pwd` +D=$(pwd) mk_empty () { repo_name="$1" @@ -422,7 +422,7 @@ test_expect_success 'push tag with non-existent, incomplete dest' ' test_expect_success 'push sha1 with non-existent, incomplete dest' ' mk_test testrepo && - test_must_fail git push testrepo `git rev-parse master`:foo + test_must_fail git push testrepo $(git rev-parse master):foo ' @@ -1004,7 +1004,7 @@ test_expect_success 'push --porcelain' ' test_expect_success 'push --porcelain bad url' ' mk_empty testrepo && test_must_fail git push >.git/bar --porcelain asdfasdfasd refs/heads/master:refs/remotes/origin/master && - test_must_fail grep -q Done .git/bar + ! grep -q Done .git/bar ' test_expect_success 'push --porcelain rejected' ' @@ -1162,15 +1162,15 @@ do mk_empty shallow && ( cd shallow && - test_must_fail git fetch ../testrepo/.git $SHA1_3 && - test_must_fail git fetch ../testrepo/.git $SHA1_1 && + test_must_fail ok=sigpipe git fetch ../testrepo/.git $SHA1_3 && + test_must_fail ok=sigpipe git fetch ../testrepo/.git $SHA1_1 && git --git-dir=../testrepo/.git config uploadpack.allowreachablesha1inwant true && git fetch ../testrepo/.git $SHA1_1 && git cat-file commit $SHA1_1 && test_must_fail git cat-file commit $SHA1_2 && git fetch ../testrepo/.git $SHA1_2 && git cat-file commit $SHA1_2 && - test_must_fail git fetch ../testrepo/.git $SHA1_3 + test_must_fail ok=sigpipe git fetch ../testrepo/.git $SHA1_3 ) ' done diff --git a/t/t5517-push-mirror.sh b/t/t5517-push-mirror.sh index 12a5dfb17e..02f160aae0 100755 --- a/t/t5517-push-mirror.sh +++ b/t/t5517-push-mirror.sh @@ -4,7 +4,7 @@ test_description='pushing to a mirror repository' . ./test-lib.sh -D=`pwd` +D=$(pwd) invert () { if "$@"; then diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index af31f04c28..17f4d0fe4e 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -9,6 +9,24 @@ modify () { mv "$2.x" "$2" } +test_pull_autostash () { + git reset --hard before-rebase && + echo dirty >new_file && + git add new_file && + git pull "$@" . copy && + test_cmp_rev HEAD^ copy && + test "$(cat new_file)" = dirty && + test "$(cat file)" = "modified again" +} + +test_pull_autostash_fail () { + git reset --hard before-rebase && + echo dirty >new_file && + git add new_file && + test_must_fail git pull "$@" . copy 2>err && + test_i18ngrep "uncommitted changes." err +} + test_expect_success setup ' echo file >file && git add file && @@ -160,6 +178,18 @@ test_expect_success 'fail if no configuration for current branch' ' test "$(cat file)" = file ' +test_expect_success 'pull --all: fail if no configuration for current branch' ' + git remote add test_remote . && + test_when_finished "git remote remove test_remote" && + git checkout -b test copy^ && + test_when_finished "git checkout -f copy && git branch -D test" && + test_config branch.test.remote test_remote && + test "$(cat file)" = file && + test_must_fail git pull --all 2>err && + test_i18ngrep "There is no tracking information" err && + test "$(cat file)" = file +' + test_expect_success 'fail if upstream branch does not exist' ' git checkout -b test copy^ && test_when_finished "git checkout -f copy && git branch -D test" && @@ -181,7 +211,7 @@ test_expect_success 'fail if the index has unresolved entries' ' test -n "$(git ls-files -u)" && cp file expected && test_must_fail git pull . second 2>err && - test_i18ngrep "Pull is not possible because you have unmerged files" err && + test_i18ngrep "Pulling is not possible because you have unmerged files." err && test_cmp expected file && git add file && test -z "$(git ls-files -u)" && @@ -225,6 +255,55 @@ test_expect_success '--rebase' ' test new = "$(git show HEAD:file2)" ' +test_expect_success '--rebase fast forward' ' + git reset --hard before-rebase && + git checkout -b ff && + echo another modification >file && + git commit -m third file && + + git checkout to-rebase && + git pull --rebase . ff && + test "$(git rev-parse HEAD)" = "$(git rev-parse ff)" && + + # The above only validates the result. Did we actually bypass rebase? + git reflog -1 >reflog.actual && + sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy && + echo "OBJID HEAD@{0}: pull --rebase . ff: Fast-forward" >reflog.expected && + test_cmp reflog.expected reflog.fuzzy +' + +test_expect_success '--rebase with conflicts shows advice' ' + test_when_finished "git rebase --abort; git checkout -f to-rebase" && + git checkout -b seq && + test_seq 5 >seq.txt && + git add seq.txt && + test_tick && + git commit -m "Add seq.txt" && + echo 6 >>seq.txt && + test_tick && + git commit -m "Append to seq.txt" seq.txt && + git checkout -b with-conflicts HEAD^ && + echo conflicting >>seq.txt && + test_tick && + git commit -m "Create conflict" seq.txt && + test_must_fail git pull --rebase . seq 2>err >out && + test_i18ngrep "When you have resolved this problem" out +' + +test_expect_success 'failed --rebase shows advice' ' + test_when_finished "git rebase --abort; git checkout -f to-rebase" && + git checkout -b diverging && + test_commit attributes .gitattributes "* text=auto" attrs && + sha1="$(printf "1\\r\\n" | git hash-object -w --stdin)" && + git update-index --cacheinfo 0644 $sha1 file && + git commit -m v1-with-cr && + # force checkout because `git reset --hard` will not leave clean `file` + git checkout -f -b fails-to-rebase HEAD^ && + test_commit v2-without-cr file "2" file2-lf && + test_must_fail git pull --rebase . diverging 2>err >out && + test_i18ngrep "When you have resolved this problem" out +' + test_expect_success '--rebase fails with multiple branches' ' git reset --hard before-rebase && test_must_fail git pull --rebase . copy master 2>err && @@ -233,6 +312,49 @@ test_expect_success '--rebase fails with multiple branches' ' test modified = "$(git show HEAD:file)" ' +test_expect_success 'pull --rebase succeeds with dirty working directory and rebase.autostash set' ' + test_config rebase.autostash true && + test_pull_autostash --rebase +' + +test_expect_success 'pull --rebase --autostash & rebase.autostash=true' ' + test_config rebase.autostash true && + test_pull_autostash --rebase --autostash +' + +test_expect_success 'pull --rebase --autostash & rebase.autostash=false' ' + test_config rebase.autostash false && + test_pull_autostash --rebase --autostash +' + +test_expect_success 'pull --rebase --autostash & rebase.autostash unset' ' + test_unconfig rebase.autostash && + test_pull_autostash --rebase --autostash +' + +test_expect_success 'pull --rebase --no-autostash & rebase.autostash=true' ' + test_config rebase.autostash true && + test_pull_autostash_fail --rebase --no-autostash +' + +test_expect_success 'pull --rebase --no-autostash & rebase.autostash=false' ' + test_config rebase.autostash false && + test_pull_autostash_fail --rebase --no-autostash +' + +test_expect_success 'pull --rebase --no-autostash & rebase.autostash unset' ' + test_unconfig rebase.autostash && + test_pull_autostash_fail --rebase --no-autostash +' + +for i in --autostash --no-autostash +do + test_expect_success "pull $i (without --rebase) is illegal" ' + test_must_fail git pull $i . copy 2>err && + test_i18ngrep "only valid with --rebase" err + ' +done + test_expect_success 'pull.rebase' ' git reset --hard before-rebase && test_config pull.rebase true && @@ -241,6 +363,16 @@ test_expect_success 'pull.rebase' ' test new = "$(git show HEAD:file2)" ' +test_expect_success 'pull --autostash & pull.rebase=true' ' + test_config pull.rebase true && + test_pull_autostash --autostash +' + +test_expect_success 'pull --no-autostash & pull.rebase=true' ' + test_config pull.rebase true && + test_pull_autostash_fail --no-autostash +' + test_expect_success 'branch.to-rebase.rebase' ' git reset --hard before-rebase && test_config branch.to-rebase.rebase true && @@ -258,6 +390,22 @@ test_expect_success 'branch.to-rebase.rebase should override pull.rebase' ' test new = "$(git show HEAD:file2)" ' +test_expect_success "pull --rebase warns on --verify-signatures" ' + git reset --hard before-rebase && + git pull --rebase --verify-signatures . copy 2>err && + test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && + test new = "$(git show HEAD:file2)" && + test_i18ngrep "ignoring --verify-signatures for rebase" err +' + +test_expect_success "pull --rebase does not warn on --no-verify-signatures" ' + git reset --hard before-rebase && + git pull --rebase --no-verify-signatures . copy 2>err && + test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && + test new = "$(git show HEAD:file2)" && + test_i18ngrep ! "verify-signatures" err +' + # add a feature branch, keep-merge, that is merged into master, so the # test can try preserving the merge commit (or not) with various # --rebase flags/pull.rebase settings. @@ -303,6 +451,16 @@ test_expect_success 'pull.rebase=preserve rebases and merges keep-merge' ' test "$(git rev-parse HEAD^2)" = "$(git rev-parse keep-merge)" ' +test_expect_success 'pull.rebase=interactive' ' + write_script "$TRASH_DIRECTORY/fake-editor" <<-\EOF && + echo I was here >fake.out && + false + EOF + test_set_editor "$TRASH_DIRECTORY/fake-editor" && + test_must_fail git pull --rebase=interactive . copy && + test "I was here" = "$(cat fake.out)" +' + test_expect_success 'pull.rebase=invalid fails' ' git reset --hard before-preserve-rebase && test_config pull.rebase invalid && @@ -365,6 +523,14 @@ test_expect_success '--rebase with rebased upstream' ' ' +test_expect_success '--rebase -f with rebased upstream' ' + test_when_finished "test_might_fail git rebase --abort" && + git reset --hard to-rebase-orig && + git pull --rebase -f me copy && + test "conflicting modification" = "$(cat file)" && + test file = "$(cat file2)" +' + test_expect_success '--rebase with rebased default upstream' ' git update-ref refs/remotes/me/copy copy-orig && diff --git a/t/t5521-pull-options.sh b/t/t5521-pull-options.sh index 56e7377189..ded8f98dbe 100755 --- a/t/t5521-pull-options.sh +++ b/t/t5521-pull-options.sh @@ -130,4 +130,39 @@ test_expect_success 'git pull --dry-run' ' ) ' +test_expect_success 'git pull --all --dry-run' ' + test_when_finished "rm -rf cloneddry" && + git init clonedry && + ( + cd clonedry && + git remote add origin ../parent && + git pull --all --dry-run && + test_path_is_missing .git/FETCH_HEAD && + test_path_is_missing .git/refs/remotes/origin/master && + test_path_is_missing .git/index && + test_path_is_missing file + ) +' + +test_expect_success 'git pull --allow-unrelated-histories' ' + test_when_finished "rm -fr src dst" && + git init src && + ( + cd src && + test_commit one && + test_commit two + ) && + git clone src dst && + ( + cd src && + git checkout --orphan side HEAD^ && + test_commit three + ) && + ( + cd dst && + test_must_fail git pull ../src side && + git pull --allow-unrelated-histories ../src side + ) +' + test_done diff --git a/t/t5522-pull-symlink.sh b/t/t5522-pull-symlink.sh index 8e9b204e02..bcff460d0a 100755 --- a/t/t5522-pull-symlink.sh +++ b/t/t5522-pull-symlink.sh @@ -54,7 +54,7 @@ test_expect_success SYMLINKS 'pulling from real subdir' ' # git rev-parse --show-cdup printed a path relative to # clone-repo/subdir/, not subdir-link/. Git rev-parse --show-cdup # used the correct .git, but when the git pull shell script did -# "cd `git rev-parse --show-cdup`", it ended up in the wrong +# "cd $(git rev-parse --show-cdup)", it ended up in the wrong # directory. A POSIX shell's "cd" works a little differently # than chdir() in C; "cd -P" is much closer to chdir(). # diff --git a/t/t5523-push-upstream.sh b/t/t5523-push-upstream.sh index 3683df13a6..d6981ba304 100755 --- a/t/t5523-push-upstream.sh +++ b/t/t5523-push-upstream.sh @@ -75,7 +75,7 @@ test_expect_success TTY 'progress messages go to tty' ' ensure_fresh_upstream && test_terminal git push -u upstream master >out 2>err && - grep "Writing objects" err + test_i18ngrep "Writing objects" err ' test_expect_success 'progress messages do not go to non-tty' ' @@ -83,7 +83,7 @@ test_expect_success 'progress messages do not go to non-tty' ' # skip progress messages, since stderr is non-tty git push -u upstream master >out 2>err && - ! grep "Writing objects" err + test_i18ngrep ! "Writing objects" err ' test_expect_success 'progress messages go to non-tty (forced)' ' @@ -91,22 +91,22 @@ test_expect_success 'progress messages go to non-tty (forced)' ' # force progress messages to stderr, even though it is non-tty git push -u --progress upstream master >out 2>err && - grep "Writing objects" err + test_i18ngrep "Writing objects" err ' test_expect_success TTY 'push -q suppresses progress' ' ensure_fresh_upstream && test_terminal git push -u -q upstream master >out 2>err && - ! grep "Writing objects" err + test_i18ngrep ! "Writing objects" err ' test_expect_success TTY 'push --no-progress suppresses progress' ' ensure_fresh_upstream && test_terminal git push -u --no-progress upstream master >out 2>err && - ! grep "Unpacking objects" err && - ! grep "Writing objects" err + test_i18ngrep ! "Unpacking objects" err && + test_i18ngrep ! "Writing objects" err ' test_expect_success TTY 'quiet push' ' diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index a4532b00d6..f3b0a8d30a 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -16,7 +16,8 @@ add_upstream_commit() { git add subfile && git commit -m new subfile && head2=$(git rev-parse --short HEAD) && - echo "From $pwd/submodule" > ../expect.err && + echo "Fetching submodule submodule" > ../expect.err && + echo "From $pwd/submodule" >> ../expect.err && echo " $head1..$head2 master -> origin/master" >> ../expect.err ) && ( @@ -27,6 +28,7 @@ add_upstream_commit() { git add deepsubfile && git commit -m new deepsubfile && head2=$(git rev-parse --short HEAD) && + echo "Fetching submodule submodule/subdir/deepsubmodule" >> ../expect.err echo "From $pwd/deepsubmodule" >> ../expect.err && echo " $head1..$head2 master -> origin/master" >> ../expect.err ) @@ -56,9 +58,7 @@ test_expect_success setup ' ( cd downstream && git submodule update --init --recursive - ) && - echo "Fetching submodule submodule" > expect.out && - echo "Fetching submodule submodule/subdir/deepsubmodule" >> expect.out + ) ' test_expect_success "fetch --recurse-submodules recurses into submodules" ' @@ -67,10 +67,21 @@ test_expect_success "fetch --recurse-submodules recurses into submodules" ' cd downstream && git fetch --recurse-submodules >../actual.out 2>../actual.err ) && - test_i18ncmp expect.out actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err actual.err ' +test_expect_success "fetch --recurse-submodules -j2 has the same output behaviour" ' + add_upstream_commit && + ( + cd downstream && + GIT_TRACE=$(pwd)/../trace.out git fetch --recurse-submodules -j2 2>../actual.err + ) && + test_must_be_empty actual.out && + test_i18ncmp expect.err actual.err && + grep "2 tasks" trace.out +' + test_expect_success "fetch alone only fetches superproject" ' add_upstream_commit && ( @@ -96,7 +107,7 @@ test_expect_success "using fetchRecurseSubmodules=true in .gitmodules recurses i git config -f .gitmodules submodule.submodule.fetchRecurseSubmodules true && git fetch >../actual.out 2>../actual.err ) && - test_i18ncmp expect.out actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err actual.err ' @@ -127,7 +138,7 @@ test_expect_success "--recurse-submodules overrides fetchRecurseSubmodules setti git config --unset -f .gitmodules submodule.submodule.fetchRecurseSubmodules && git config --unset submodule.submodule.fetchRecurseSubmodules ) && - test_i18ncmp expect.out actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err actual.err ' @@ -140,13 +151,22 @@ test_expect_success "--quiet propagates to submodules" ' ! test -s actual.err ' +test_expect_success "--quiet propagates to parallel submodules" ' + ( + cd downstream && + git fetch --recurse-submodules -j 2 --quiet >../actual.out 2>../actual.err + ) && + ! test -s actual.out && + ! test -s actual.err +' + test_expect_success "--dry-run propagates to submodules" ' add_upstream_commit && ( cd downstream && git fetch --recurse-submodules --dry-run >../actual.out 2>../actual.err ) && - test_i18ncmp expect.out actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err actual.err ' @@ -155,7 +175,7 @@ test_expect_success "Without --dry-run propagates to submodules" ' cd downstream && git fetch --recurse-submodules >../actual.out 2>../actual.err ) && - test_i18ncmp expect.out actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err actual.err ' @@ -166,7 +186,7 @@ test_expect_success "recurseSubmodules=true propagates into submodules" ' git config fetch.recurseSubmodules true git fetch >../actual.out 2>../actual.err ) && - test_i18ncmp expect.out actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err actual.err ' @@ -180,7 +200,7 @@ test_expect_success "--recurse-submodules overrides config in submodule" ' ) && git fetch --recurse-submodules >../actual.out 2>../actual.err ) && - test_i18ncmp expect.out actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err actual.err ' @@ -214,16 +234,15 @@ test_expect_success "Recursion stops when no new submodule commits are fetched" git add submodule && git commit -m "new submodule" && head2=$(git rev-parse --short HEAD) && - echo "Fetching submodule submodule" > expect.out.sub && echo "From $pwd/." > expect.err.sub && echo " $head1..$head2 master -> origin/master" >>expect.err.sub && - head -2 expect.err >> expect.err.sub && + head -3 expect.err >> expect.err.sub && ( cd downstream && git fetch >../actual.out 2>../actual.err ) && test_i18ncmp expect.err.sub actual.err && - test_i18ncmp expect.out.sub actual.out + test_must_be_empty actual.out ' test_expect_success "Recursion doesn't happen when new superproject commits don't change any submodules" ' @@ -269,7 +288,7 @@ test_expect_success "Recursion picks up config in submodule" ' ) ) && test_i18ncmp expect.err.sub actual.err && - test_i18ncmp expect.out actual.out + test_must_be_empty actual.out ' test_expect_success "Recursion picks up all submodules when necessary" ' @@ -285,7 +304,8 @@ test_expect_success "Recursion picks up all submodules when necessary" ' git add subdir/deepsubmodule && git commit -m "new deepsubmodule" head2=$(git rev-parse --short HEAD) && - echo "From $pwd/submodule" > ../expect.err.sub && + echo "Fetching submodule submodule" > ../expect.err.sub && + echo "From $pwd/submodule" >> ../expect.err.sub && echo " $head1..$head2 master -> origin/master" >> ../expect.err.sub ) && head1=$(git rev-parse --short HEAD) && @@ -295,13 +315,13 @@ test_expect_success "Recursion picks up all submodules when necessary" ' echo "From $pwd/." > expect.err.2 && echo " $head1..$head2 master -> origin/master" >> expect.err.2 && cat expect.err.sub >> expect.err.2 && - tail -2 expect.err >> expect.err.2 && + tail -3 expect.err >> expect.err.2 && ( cd downstream && git fetch >../actual.out 2>../actual.err ) && test_i18ncmp expect.err.2 actual.err && - test_i18ncmp expect.out actual.out + test_must_be_empty actual.out ' test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no new commits are fetched in the superproject (and ignores config)" ' @@ -317,7 +337,8 @@ test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no ne git add subdir/deepsubmodule && git commit -m "new deepsubmodule" && head2=$(git rev-parse --short HEAD) && - echo "From $pwd/submodule" > ../expect.err.sub && + echo Fetching submodule submodule > ../expect.err.sub && + echo "From $pwd/submodule" >> ../expect.err.sub && echo " $head1..$head2 master -> origin/master" >> ../expect.err.sub ) && ( @@ -335,7 +356,7 @@ test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necess git add submodule && git commit -m "new submodule" && head2=$(git rev-parse --short HEAD) && - tail -2 expect.err > expect.err.deepsub && + tail -3 expect.err > expect.err.deepsub && echo "From $pwd/." > expect.err && echo " $head1..$head2 master -> origin/master" >>expect.err && cat expect.err.sub >> expect.err && @@ -354,7 +375,7 @@ test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necess git config --unset -f .gitmodules submodule.subdir/deepsubmodule.fetchRecursive ) ) && - test_i18ncmp expect.out actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err actual.err ' @@ -388,7 +409,7 @@ test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config head2=$(git rev-parse --short HEAD) && echo "From $pwd/." > expect.err.2 && echo " $head1..$head2 master -> origin/master" >>expect.err.2 && - head -2 expect.err >> expect.err.2 && + head -3 expect.err >> expect.err.2 && ( cd downstream && git config fetch.recurseSubmodules on-demand && @@ -399,7 +420,7 @@ test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config cd downstream && git config --unset fetch.recurseSubmodules ) && - test_i18ncmp expect.out.sub actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err.2 actual.err ' @@ -416,7 +437,7 @@ test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' override head2=$(git rev-parse --short HEAD) && echo "From $pwd/." > expect.err.2 && echo " $head1..$head2 master -> origin/master" >>expect.err.2 && - head -2 expect.err >> expect.err.2 && + head -3 expect.err >> expect.err.2 && ( cd downstream && git config submodule.submodule.fetchRecurseSubmodules on-demand && @@ -427,7 +448,7 @@ test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' override cd downstream && git config --unset submodule.submodule.fetchRecurseSubmodules ) && - test_i18ncmp expect.out.sub actual.out && + test_must_be_empty actual.out && test_i18ncmp expect.err.2 actual.err ' @@ -450,4 +471,53 @@ test_expect_success "don't fetch submodule when newly recorded commits are alrea test_i18ncmp expect.err actual.err ' +test_expect_success 'fetching submodules respects parallel settings' ' + git config fetch.recurseSubmodules true && + ( + cd downstream && + GIT_TRACE=$(pwd)/trace.out git fetch --jobs 7 && + grep "7 tasks" trace.out && + git config submodule.fetchJobs 8 && + GIT_TRACE=$(pwd)/trace.out git fetch && + grep "8 tasks" trace.out && + GIT_TRACE=$(pwd)/trace.out git fetch --jobs 9 && + grep "9 tasks" trace.out + ) +' + +test_expect_success 'fetching submodule into a broken repository' ' + # Prepare src and src/sub nested in it + git init src && + ( + cd src && + git init sub && + git -C sub commit --allow-empty -m "initial in sub" && + git submodule add -- ./sub sub && + git commit -m "initial in top" + ) && + + # Clone the old-fashoned way + git clone src dst && + git -C dst clone ../src/sub sub && + + # Make sure that old-fashoned layout is still supported + git -C dst status && + + # "diff" would find no change + git -C dst diff --exit-code && + + # Recursive-fetch works fine + git -C dst fetch --recurse-submodules && + + # Break the receiving submodule + rm -f dst/sub/.git/HEAD && + + # NOTE: without the fix the following tests will recurse forever! + # They should terminate with an error. + + test_must_fail git -C dst status && + test_must_fail git -C dst diff && + test_must_fail git -C dst fetch --recurse-submodules +' + test_done diff --git a/t/t5528-push-default.sh b/t/t5528-push-default.sh index 73f4bb6346..44309566f1 100755 --- a/t/t5528-push-default.sh +++ b/t/t5528-push-default.sh @@ -98,6 +98,16 @@ test_expect_success 'push from/to new branch with upstream, matching and simple' test_push_failure upstream ' +test_expect_success 'push ambiguously named branch with upstream, matching and simple' ' + git checkout -b ambiguous && + test_config branch.ambiguous.remote parent1 && + test_config branch.ambiguous.merge refs/heads/ambiguous && + git tag ambiguous && + test_push_success simple ambiguous && + test_push_success matching ambiguous && + test_push_success upstream ambiguous +' + test_expect_success 'push from/to new branch with current creates remote branch' ' test_config branch.new-branch.remote repo1 && git checkout new-branch && diff --git a/t/t5530-upload-pack-error.sh b/t/t5530-upload-pack-error.sh index 3932e797f7..4f6e32b04c 100755 --- a/t/t5530-upload-pack-error.sh +++ b/t/t5530-upload-pack-error.sh @@ -4,7 +4,7 @@ test_description='errors in upload-pack' . ./test-lib.sh -D=`pwd` +D=$(pwd) corrupt_repo () { object_sha1=$(git rev-parse "$1") && diff --git a/t/t5531-deep-submodule-push.sh b/t/t5531-deep-submodule-push.sh index 6507487c1a..1524ff5ba6 100755 --- a/t/t5531-deep-submodule-push.sh +++ b/t/t5531-deep-submodule-push.sh @@ -64,7 +64,12 @@ test_expect_success 'push fails if submodule commit not on remote' ' cd work && git add gar/bage && git commit -m "Third commit for gar/bage" && - test_must_fail git push --recurse-submodules=check ../pub.git master + # the push should fail with --recurse-submodules=check + # on the command line... + test_must_fail git push --recurse-submodules=check ../pub.git master && + + # ...or if specified in the configuration.. + test_must_fail git -c push.recurseSubmodules=check push ../pub.git master ) ' @@ -79,6 +84,216 @@ test_expect_success 'push succeeds after commit was pushed to remote' ' ) ' +test_expect_success 'push succeeds if submodule commit not on remote but using on-demand on command line' ' + ( + cd work/gar/bage && + >recurse-on-demand-on-command-line && + git add recurse-on-demand-on-command-line && + git commit -m "Recurse on-demand on command line junk" + ) && + ( + cd work && + git add gar/bage && + git commit -m "Recurse on-demand on command line for gar/bage" && + git push --recurse-submodules=on-demand ../pub.git master && + # Check that the supermodule commit got there + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master && + # Check that the submodule commit got there too + cd gar/bage && + git diff --quiet origin/master master + ) +' + +test_expect_success 'push succeeds if submodule commit not on remote but using on-demand from config' ' + ( + cd work/gar/bage && + >recurse-on-demand-from-config && + git add recurse-on-demand-from-config && + git commit -m "Recurse on-demand from config junk" + ) && + ( + cd work && + git add gar/bage && + git commit -m "Recurse on-demand from config for gar/bage" && + git -c push.recurseSubmodules=on-demand push ../pub.git master && + # Check that the supermodule commit got there + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master && + # Check that the submodule commit got there too + cd gar/bage && + git diff --quiet origin/master master + ) +' + +test_expect_success 'push recurse-submodules on command line overrides config' ' + ( + cd work/gar/bage && + >recurse-check-on-command-line-overriding-config && + git add recurse-check-on-command-line-overriding-config && + git commit -m "Recurse on command-line overriding config junk" + ) && + ( + cd work && + git add gar/bage && + git commit -m "Recurse on command-line overriding config for gar/bage" && + + # Ensure that we can override on-demand in the config + # to just check submodules + test_must_fail git -c push.recurseSubmodules=on-demand push --recurse-submodules=check ../pub.git master && + # Check that the supermodule commit did not get there + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master^ && + # Check that the submodule commit did not get there + (cd gar/bage && git diff --quiet origin/master master^) && + + # Ensure that we can override check in the config to + # disable submodule recursion entirely + (cd gar/bage && git diff --quiet origin/master master^) && + git -c push.recurseSubmodules=on-demand push --recurse-submodules=no ../pub.git master && + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master && + (cd gar/bage && git diff --quiet origin/master master^) && + + # Ensure that we can override check in the config to + # disable submodule recursion entirely (alternative form) + git -c push.recurseSubmodules=on-demand push --no-recurse-submodules ../pub.git master && + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master && + (cd gar/bage && git diff --quiet origin/master master^) && + + # Ensure that we can override check in the config to + # push the submodule too + git -c push.recurseSubmodules=check push --recurse-submodules=on-demand ../pub.git master && + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master && + (cd gar/bage && git diff --quiet origin/master master) + ) +' + +test_expect_success 'push recurse-submodules last one wins on command line' ' + ( + cd work/gar/bage && + >recurse-check-on-command-line-overriding-earlier-command-line && + git add recurse-check-on-command-line-overriding-earlier-command-line && + git commit -m "Recurse on command-line overridiing earlier command-line junk" + ) && + ( + cd work && + git add gar/bage && + git commit -m "Recurse on command-line overriding earlier command-line for gar/bage" && + + # should result in "check" + test_must_fail git push --recurse-submodules=on-demand --recurse-submodules=check ../pub.git master && + # Check that the supermodule commit did not get there + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master^ && + # Check that the submodule commit did not get there + (cd gar/bage && git diff --quiet origin/master master^) && + + # should result in "no" + git push --recurse-submodules=on-demand --recurse-submodules=no ../pub.git master && + # Check that the supermodule commit did get there + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master && + # Check that the submodule commit did not get there + (cd gar/bage && git diff --quiet origin/master master^) && + + # should result in "no" + git push --recurse-submodules=on-demand --no-recurse-submodules ../pub.git master && + # Check that the submodule commit did not get there + (cd gar/bage && git diff --quiet origin/master master^) && + + # But the options in the other order should push the submodule + git push --recurse-submodules=check --recurse-submodules=on-demand ../pub.git master && + # Check that the submodule commit did get there + git fetch ../pub.git && + (cd gar/bage && git diff --quiet origin/master master) + ) +' + +test_expect_success 'push succeeds if submodule commit not on remote using on-demand from cmdline overriding config' ' + ( + cd work/gar/bage && + >recurse-on-demand-on-command-line-overriding-config && + git add recurse-on-demand-on-command-line-overriding-config && + git commit -m "Recurse on-demand on command-line overriding config junk" + ) && + ( + cd work && + git add gar/bage && + git commit -m "Recurse on-demand on command-line overriding config for gar/bage" && + git -c push.recurseSubmodules=check push --recurse-submodules=on-demand ../pub.git master && + # Check that the supermodule commit got there + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master && + # Check that the submodule commit got there + cd gar/bage && + git diff --quiet origin/master master + ) +' + +test_expect_success 'push succeeds if submodule commit disabling recursion from cmdline overriding config' ' + ( + cd work/gar/bage && + >recurse-disable-on-command-line-overriding-config && + git add recurse-disable-on-command-line-overriding-config && + git commit -m "Recurse disable on command-line overriding config junk" + ) && + ( + cd work && + git add gar/bage && + git commit -m "Recurse disable on command-line overriding config for gar/bage" && + git -c push.recurseSubmodules=check push --recurse-submodules=no ../pub.git master && + # Check that the supermodule commit got there + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master && + # But that the submodule commit did not + ( cd gar/bage && git diff --quiet origin/master master^ ) && + # Now push it to avoid confusing future tests + git push --recurse-submodules=on-demand ../pub.git master + ) +' + +test_expect_success 'push succeeds if submodule commit disabling recursion from cmdline (alternative form) overriding config' ' + ( + cd work/gar/bage && + >recurse-disable-on-command-line-alt-overriding-config && + git add recurse-disable-on-command-line-alt-overriding-config && + git commit -m "Recurse disable on command-line alternative overriding config junk" + ) && + ( + cd work && + git add gar/bage && + git commit -m "Recurse disable on command-line alternative overriding config for gar/bage" && + git -c push.recurseSubmodules=check push --no-recurse-submodules ../pub.git master && + # Check that the supermodule commit got there + git fetch ../pub.git && + git diff --quiet FETCH_HEAD master && + # But that the submodule commit did not + ( cd gar/bage && git diff --quiet origin/master master^ ) && + # Now push it to avoid confusing future tests + git push --recurse-submodules=on-demand ../pub.git master + ) +' + +test_expect_success 'push fails if recurse submodules option passed as yes' ' + ( + cd work/gar/bage && + >recurse-push-fails-if-recurse-submodules-passed-as-yes && + git add recurse-push-fails-if-recurse-submodules-passed-as-yes && + git commit -m "Recurse push fails if recurse submodules option passed as yes" + ) && + ( + cd work && + git add gar/bage && + git commit -m "Recurse push fails if recurse submodules option passed as yes for gar/bage" && + test_must_fail git push --recurse-submodules=yes ../pub.git master && + test_must_fail git -c push.recurseSubmodules=yes push ../pub.git master && + git push --recurse-submodules=on-demand ../pub.git master + ) +' + test_expect_success 'push fails when commit on multiple branches if one branch has no remote' ' ( cd work/gar/bage && @@ -212,7 +427,31 @@ test_expect_success 'push unpushable submodule recursively fails' ' cd submodule.git && git rev-parse master >../actual ) && + test_when_finished git -C work reset --hard master^ && test_cmp expected actual ' +test_expect_success 'push --dry-run does not recursively update submodules' ' + ( + cd work/gar/bage && + git checkout master && + git rev-parse master >../../../expected_submodule && + > junk9 && + git add junk9 && + git commit -m "Ninth junk" && + + # Go up to 'work' directory + cd ../.. && + git checkout master && + git rev-parse master >../expected_pub && + git add gar/bage && + git commit -m "Ninth commit for gar/bage" && + git push --dry-run --recurse-submodules=on-demand ../pub.git master + ) && + git -C submodule.git rev-parse master >actual_submodule && + git -C pub.git rev-parse master >actual_pub && + test_cmp expected_pub actual_pub && + test_cmp expected_submodule actual_submodule +' + test_done diff --git a/t/t5532-fetch-proxy.sh b/t/t5532-fetch-proxy.sh index 5531bd1af4..51c9669398 100755 --- a/t/t5532-fetch-proxy.sh +++ b/t/t5532-fetch-proxy.sh @@ -12,10 +12,8 @@ test_expect_success 'setup remote repo' ' ) ' -cat >proxy <<'EOF' -#!/bin/sh -echo >&2 "proxying for $*" -cmd=`"$PERL_PATH" -e ' +test_expect_success 'setup proxy script' ' + write_script proxy-get-cmd "$PERL_PATH" <<-\EOF && read(STDIN, $buf, 4); my $n = hex($buf) - 4; read(STDIN, $buf, $n); @@ -23,11 +21,16 @@ cmd=`"$PERL_PATH" -e ' # drop absolute-path on repo name $cmd =~ s{ /}{ }; print $cmd; -'` -echo >&2 "Running '$cmd'" -exec $cmd -EOF -chmod +x proxy + EOF + + write_script proxy <<-\EOF + echo >&2 "proxying for $*" + cmd=$(./proxy-get-cmd) + echo >&2 "Running $cmd" + exec $cmd + EOF +' + test_expect_success 'setup local repo' ' git remote add fake git://example.com/remote && git config core.gitproxy ./proxy diff --git a/t/t5533-push-cas.sh b/t/t5533-push-cas.sh index c402d8d3d7..a2c9e7439f 100755 --- a/t/t5533-push-cas.sh +++ b/t/t5533-push-cas.sh @@ -25,7 +25,8 @@ test_expect_success 'push to update (protected)' ' ( cd dst && test_commit D && - test_must_fail git push --force-with-lease=master:master origin master + test_must_fail git push --force-with-lease=master:master origin master 2>err && + grep "stale info" err ) && git ls-remote . refs/heads/master >expect && git ls-remote src refs/heads/master >actual && @@ -37,7 +38,8 @@ test_expect_success 'push to update (protected, forced)' ' ( cd dst && test_commit D && - git push --force --force-with-lease=master:master origin master + git push --force --force-with-lease=master:master origin master 2>err && + grep "forced update" err ) && git ls-remote dst refs/heads/master >expect && git ls-remote src refs/heads/master >actual && @@ -101,7 +103,8 @@ test_expect_success 'push to update (allowed, tracking)' ' ( cd dst && test_commit D && - git push --force-with-lease=master origin master + git push --force-with-lease=master origin master 2>err && + ! grep "forced update" err ) && git ls-remote dst refs/heads/master >expect && git ls-remote src refs/heads/master >actual && @@ -114,7 +117,8 @@ test_expect_success 'push to update (allowed even though no-ff)' ' cd dst && git reset --hard HEAD^ && test_commit D && - git push --force-with-lease=master origin master + git push --force-with-lease=master origin master 2>err && + grep "forced update" err ) && git ls-remote dst refs/heads/master >expect && git ls-remote src refs/heads/master >actual && @@ -147,7 +151,8 @@ test_expect_success 'push to delete (allowed)' ' setup_srcdst_basic && ( cd dst && - git push --force-with-lease=master origin :master + git push --force-with-lease=master origin :master 2>err && + grep deleted err ) && >expect && git ls-remote src refs/heads/master >actual && @@ -186,4 +191,42 @@ test_expect_success 'cover everything with default force-with-lease (allowed)' ' test_cmp expect actual ' +test_expect_success 'new branch covered by force-with-lease' ' + setup_srcdst_basic && + ( + cd dst && + git branch branch master && + git push --force-with-lease=branch origin branch + ) && + git ls-remote dst refs/heads/branch >expect && + git ls-remote src refs/heads/branch >actual && + test_cmp expect actual +' + +test_expect_success 'new branch covered by force-with-lease (explicit)' ' + setup_srcdst_basic && + ( + cd dst && + git branch branch master && + git push --force-with-lease=branch: origin branch + ) && + git ls-remote dst refs/heads/branch >expect && + git ls-remote src refs/heads/branch >actual && + test_cmp expect actual +' + +test_expect_success 'new branch already exists' ' + setup_srcdst_basic && + ( + cd src && + git checkout -b branch master && + test_commit F + ) && + ( + cd dst && + git branch branch master && + test_must_fail git push --force-with-lease=branch: origin branch + ) +' + test_done diff --git a/t/t5536-fetch-conflicts.sh b/t/t5536-fetch-conflicts.sh index 6c5d3a4ce0..2e42cf3316 100755 --- a/t/t5536-fetch-conflicts.sh +++ b/t/t5536-fetch-conflicts.sh @@ -22,8 +22,8 @@ verify_stderr () { cat >expected && # We're not interested in the error # "fatal: The remote end hung up unexpectedly": - grep -E '^(fatal|warning):' <error | grep -v 'hung up' >actual | sort && - test_cmp expected actual + test_i18ngrep -E '^(fatal|warning):' <error | grep -v 'hung up' >actual | sort && + test_i18ncmp expected actual } test_expect_success 'setup' ' diff --git a/t/t5537-fetch-shallow.sh b/t/t5537-fetch-shallow.sh index a980574682..df8d2f095a 100755 --- a/t/t5537-fetch-shallow.sh +++ b/t/t5537-fetch-shallow.sh @@ -98,7 +98,7 @@ EOF test_expect_success 'fetch something upstream has but hidden by clients shallow boundaries' ' # the blob "1" is available in .git but hidden by the # shallow2/.git/shallow and it should be resent - ! git --git-dir=shallow2/.git cat-file blob `echo 1|git hash-object --stdin` >/dev/null && + ! git --git-dir=shallow2/.git cat-file blob $(echo 1|git hash-object --stdin) >/dev/null && echo 1 >1.t && git add 1.t && git commit -m add-1-back && @@ -114,7 +114,7 @@ add-1-back EOF test_cmp expect actual ) && - git --git-dir=shallow2/.git cat-file blob `echo 1|git hash-object --stdin` >/dev/null + git --git-dir=shallow2/.git cat-file blob $(echo 1|git hash-object --stdin) >/dev/null ' diff --git a/t/t5538-push-shallow.sh b/t/t5538-push-shallow.sh index ceee95b8a4..ecbf84d21c 100755 --- a/t/t5538-push-shallow.sh +++ b/t/t5538-push-shallow.sh @@ -104,7 +104,7 @@ EOF ' test_expect_success 'push from full to shallow' ' - ! git --git-dir=shallow2/.git cat-file blob `echo 1|git hash-object --stdin` && + ! git --git-dir=shallow2/.git cat-file blob $(echo 1|git hash-object --stdin) && commit 1 && git push shallow2/.git +master:refs/remotes/top/master && ( @@ -117,7 +117,7 @@ test_expect_success 'push from full to shallow' ' 3 EOF test_cmp expect actual && - git cat-file blob `echo 1|git hash-object --stdin` >/dev/null + git cat-file blob $(echo 1|git hash-object --stdin) >/dev/null ) ' test_done diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh index 37a433504e..5fbf67c446 100755 --- a/t/t5539-fetch-http-shallow.sh +++ b/t/t5539-fetch-http-shallow.sh @@ -73,5 +73,78 @@ test_expect_success 'no shallow lines after receiving ACK ready' ' ) ' +test_expect_success 'clone shallow since ...' ' + test_create_repo shallow-since && + ( + cd shallow-since && + GIT_COMMITTER_DATE="100000000 +0700" git commit --allow-empty -m one && + GIT_COMMITTER_DATE="200000000 +0700" git commit --allow-empty -m two && + GIT_COMMITTER_DATE="300000000 +0700" git commit --allow-empty -m three && + mv .git "$HTTPD_DOCUMENT_ROOT_PATH/shallow-since.git" && + git clone --shallow-since "300000000 +0700" $HTTPD_URL/smart/shallow-since.git ../shallow11 && + git -C ../shallow11 log --pretty=tformat:%s HEAD >actual && + echo three >expected && + test_cmp expected actual + ) +' + +test_expect_success 'fetch shallow since ...' ' + git -C shallow11 fetch --shallow-since "200000000 +0700" origin && + git -C shallow11 log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + three + two + EOF + test_cmp expected actual +' + +test_expect_success 'shallow clone exclude tag two' ' + test_create_repo shallow-exclude && + ( + cd shallow-exclude && + test_commit one && + test_commit two && + test_commit three && + mv .git "$HTTPD_DOCUMENT_ROOT_PATH/shallow-exclude.git" && + git clone --shallow-exclude two $HTTPD_URL/smart/shallow-exclude.git ../shallow12 && + git -C ../shallow12 log --pretty=tformat:%s HEAD >actual && + echo three >expected && + test_cmp expected actual + ) +' + +test_expect_success 'fetch exclude tag one' ' + git -C shallow12 fetch --shallow-exclude one origin && + git -C shallow12 log --pretty=tformat:%s origin/master >actual && + test_write_lines three two >expected && + test_cmp expected actual +' + +test_expect_success 'fetching deepen' ' + test_create_repo shallow-deepen && + ( + cd shallow-deepen && + test_commit one && + test_commit two && + test_commit three && + mv .git "$HTTPD_DOCUMENT_ROOT_PATH/shallow-deepen.git" && + git clone --depth 1 $HTTPD_URL/smart/shallow-deepen.git deepen && + mv "$HTTPD_DOCUMENT_ROOT_PATH/shallow-deepen.git" .git && + test_commit four && + git -C deepen log --pretty=tformat:%s master >actual && + echo three >expected && + test_cmp expected actual && + mv .git "$HTTPD_DOCUMENT_ROOT_PATH/shallow-deepen.git" && + git -C deepen fetch --deepen=1 && + git -C deepen log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + four + three + two + EOF + test_cmp expected actual + ) +' + stop_httpd test_done diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index fd7d06b9a2..d38bf32470 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -74,7 +74,7 @@ test_expect_success 'push to remote repository (standard)' ' test_tick && git commit -m path2 && HEAD=$(git rev-parse --verify HEAD) && - GIT_CURL_VERBOSE=1 git push -v -v 2>err && + GIT_TRACE_CURL=true git push -v -v 2>err && ! grep "Expect: 100-continue" err && grep "POST git-receive-pack ([0-9]* bytes)" err && (cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && @@ -119,7 +119,7 @@ test_expect_success 'rejected update prints status' ' git commit -m dev2 && test_must_fail git push origin dev2 2>act && sed -e "/^remote: /s/ *$//" <act >cmp && - test_cmp exp cmp + test_i18ncmp exp cmp ' rm -f "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update" @@ -219,7 +219,7 @@ test_expect_success TTY 'push shows progress when stderr is a tty' ' cd "$ROOT_PATH"/test_repo_clone && test_commit noisy && test_terminal git push >output 2>&1 && - grep "^Writing objects" output + test_i18ngrep "^Writing objects" output ' test_expect_success TTY 'push --quiet silences status and progress' ' @@ -233,16 +233,16 @@ test_expect_success TTY 'push --no-progress silences progress but not status' ' cd "$ROOT_PATH"/test_repo_clone && test_commit no-progress && test_terminal git push --no-progress >output 2>&1 && - grep "^To http" output && - ! grep "^Writing objects" + test_i18ngrep "^To http" output && + test_i18ngrep ! "^Writing objects" ' test_expect_success 'push --progress shows progress to non-tty' ' cd "$ROOT_PATH"/test_repo_clone && test_commit progress && git push --progress >output 2>&1 && - grep "^To http" output && - grep "^Writing objects" output + test_i18ngrep "^To http" output && + test_i18ngrep "^Writing objects" output ' test_expect_success 'http push gives sane defaults to reflog' ' @@ -368,5 +368,14 @@ test_expect_success GPG 'push with post-receive to inspect certificate' ' test_cmp expect "$HTTPD_DOCUMENT_ROOT_PATH/push-cert-status" ' +test_expect_success 'push status output scrubs password' ' + cd "$ROOT_PATH/test_repo_clone" && + git push --porcelain \ + "$HTTPD_URL_USER_PASS/smart/test_repo.git" \ + +HEAD:scrub >status && + # should have been scrubbed down to vanilla URL + grep "^To $HTTPD_URL/smart/test_repo.git" status +' + stop_httpd test_done diff --git a/t/t5544-pack-objects-hook.sh b/t/t5544-pack-objects-hook.sh new file mode 100755 index 0000000000..4357af1525 --- /dev/null +++ b/t/t5544-pack-objects-hook.sh @@ -0,0 +1,62 @@ +#!/bin/sh + +test_description='test custom script in place of pack-objects' +. ./test-lib.sh + +test_expect_success 'create some history to fetch' ' + test_commit one && + test_commit two +' + +test_expect_success 'create debugging hook script' ' + write_script .git/hook <<-\EOF + echo >&2 "hook running" + echo "$*" >hook.args + cat >hook.stdin + "$@" <hook.stdin >hook.stdout + cat hook.stdout + EOF +' + +clear_hook_results () { + rm -rf .git/hook.* dst.git +} + +test_expect_success 'hook runs via global config' ' + clear_hook_results && + test_config_global uploadpack.packObjectsHook ./hook && + git clone --no-local . dst.git 2>stderr && + grep "hook running" stderr +' + +test_expect_success 'hook outputs are sane' ' + # check that we recorded a usable pack + git index-pack --stdin <.git/hook.stdout && + + # check that we recorded args and stdin. We do not check + # the full argument list or the exact pack contents, as it would make + # the test brittle. So just sanity check that we could replay + # the packing procedure. + grep "^git" .git/hook.args && + $(cat .git/hook.args) <.git/hook.stdin >replay +' + +test_expect_success 'hook runs from -c config' ' + clear_hook_results && + git clone --no-local \ + -u "git -c uploadpack.packObjectsHook=./hook upload-pack" \ + . dst.git 2>stderr && + grep "hook running" stderr +' + +test_expect_success 'hook does not run from repo config' ' + clear_hook_results && + test_config uploadpack.packObjectsHook "./hook" && + git clone --no-local . dst.git 2>stderr && + ! grep "hook running" stderr && + test_path_is_missing .git/hook.args && + test_path_is_missing .git/hook.stdin && + test_path_is_missing .git/hook.stdout +' + +test_done diff --git a/t/t5545-push-options.sh b/t/t5545-push-options.sh new file mode 100755 index 0000000000..ea813b9383 --- /dev/null +++ b/t/t5545-push-options.sh @@ -0,0 +1,103 @@ +#!/bin/sh + +test_description='pushing to a repository using push options' + +. ./test-lib.sh + +mk_repo_pair () { + rm -rf workbench upstream && + test_create_repo upstream && + test_create_repo workbench && + ( + cd upstream && + git config receive.denyCurrentBranch warn && + mkdir -p .git/hooks && + cat >.git/hooks/pre-receive <<-'EOF' && + #!/bin/sh + if test -n "$GIT_PUSH_OPTION_COUNT"; then + i=0 + >hooks/pre-receive.push_options + while test "$i" -lt "$GIT_PUSH_OPTION_COUNT"; do + eval "value=\$GIT_PUSH_OPTION_$i" + echo $value >>hooks/pre-receive.push_options + i=$((i + 1)) + done + fi + EOF + chmod u+x .git/hooks/pre-receive + + cat >.git/hooks/post-receive <<-'EOF' && + #!/bin/sh + if test -n "$GIT_PUSH_OPTION_COUNT"; then + i=0 + >hooks/post-receive.push_options + while test "$i" -lt "$GIT_PUSH_OPTION_COUNT"; do + eval "value=\$GIT_PUSH_OPTION_$i" + echo $value >>hooks/post-receive.push_options + i=$((i + 1)) + done + fi + EOF + chmod u+x .git/hooks/post-receive + ) && + ( + cd workbench && + git remote add up ../upstream + ) +} + +# Compare the ref ($1) in upstream with a ref value from workbench ($2) +# i.e. test_refs second HEAD@{2} +test_refs () { + test $# = 2 && + git -C upstream rev-parse --verify "$1" >expect && + git -C workbench rev-parse --verify "$2" >actual && + test_cmp expect actual +} + +test_expect_success 'one push option works for a single branch' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + git push --push-option=asdf up master + ) && + test_refs master master && + echo "asdf" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options && + test_cmp expect upstream/.git/hooks/post-receive.push_options +' + +test_expect_success 'push option denied by remote' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions false && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + test_must_fail git push --push-option=asdf up master + ) && + test_refs master HEAD@{1} +' + +test_expect_success 'two push options work' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + git push --push-option=asdf --push-option="more structured text" up master + ) && + test_refs master master && + printf "asdf\nmore structured text\n" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options && + test_cmp expect upstream/.git/hooks/post-receive.push_options +' + +test_done diff --git a/t/t5546-receive-limits.sh b/t/t5546-receive-limits.sh new file mode 100755 index 0000000000..10cb0be2b7 --- /dev/null +++ b/t/t5546-receive-limits.sh @@ -0,0 +1,55 @@ +#!/bin/sh + +test_description='check receive input limits' +. ./test-lib.sh + +# Let's run tests with different unpack limits: 1 and 10000 +# When the limit is 1, `git receive-pack` will call `git index-pack`. +# When the limit is 10000, `git receive-pack` will call `git unpack-objects`. + +test_pack_input_limit () { + case "$1" in + index) unpack_limit=1 ;; + unpack) unpack_limit=10000 ;; + esac + + test_expect_success 'prepare destination repository' ' + rm -fr dest && + git --bare init dest + ' + + test_expect_success "set unpacklimit to $unpack_limit" ' + git --git-dir=dest config receive.unpacklimit "$unpack_limit" + ' + + test_expect_success 'setting receive.maxInputSize to 512 rejects push' ' + git --git-dir=dest config receive.maxInputSize 512 && + test_must_fail git push dest HEAD + ' + + test_expect_success 'bumping limit to 4k allows push' ' + git --git-dir=dest config receive.maxInputSize 4k && + git push dest HEAD + ' + + test_expect_success 'prepare destination repository (again)' ' + rm -fr dest && + git --bare init dest + ' + + test_expect_success 'lifting the limit allows push' ' + git --git-dir=dest config receive.maxInputSize 0 && + git push dest HEAD + ' +} + +test_expect_success "create known-size (1024 bytes) commit" ' + test-genrandom foo 1024 >one-k && + git add one-k && + test_commit one-k +' + +test_pack_input_limit index +test_pack_input_limit unpack + +test_done diff --git a/t/t5547-push-quarantine.sh b/t/t5547-push-quarantine.sh new file mode 100755 index 0000000000..af9fcd833a --- /dev/null +++ b/t/t5547-push-quarantine.sh @@ -0,0 +1,61 @@ +#!/bin/sh + +test_description='check quarantine of objects during push' +. ./test-lib.sh + +test_expect_success 'create picky dest repo' ' + git init --bare dest.git && + write_script dest.git/hooks/pre-receive <<-\EOF + while read old new ref; do + test "$(git log -1 --format=%s $new)" = reject && exit 1 + done + exit 0 + EOF +' + +test_expect_success 'accepted objects work' ' + test_commit ok && + git push dest.git HEAD && + commit=$(git rev-parse HEAD) && + git --git-dir=dest.git cat-file commit $commit +' + +test_expect_success 'rejected objects are not installed' ' + test_commit reject && + commit=$(git rev-parse HEAD) && + test_must_fail git push dest.git reject && + test_must_fail git --git-dir=dest.git cat-file commit $commit +' + +test_expect_success 'rejected objects are removed' ' + echo "incoming-*" >expect && + (cd dest.git/objects && echo incoming-*) >actual && + test_cmp expect actual +' + +test_expect_success 'push to repo path with path separator (colon)' ' + # The interesting failure case here is when the + # receiving end cannot access its original object directory, + # so make it likely for us to generate a delta by having + # a non-trivial file with multiple versions. + + test-genrandom foo 4096 >file.bin && + git add file.bin && + git commit -m bin && + + if test_have_prereq MINGW + then + pathsep=";" + else + pathsep=":" + fi && + git clone --bare . "xxx${pathsep}yyy.git" && + + echo change >>file.bin && + git commit -am change && + # Note that we have to use the full path here, or it gets confused + # with the ssh host:path syntax. + git push "$(pwd)/xxx${pathsep}yyy.git" HEAD +' + +test_done diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index 87a7aa04ae..aeb3a63f7c 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -91,6 +91,55 @@ test_expect_success 'configured username does not override URL' ' expect_askpass pass user@host ' +test_expect_success 'set up repo with http submodules' ' + git init super && + set_askpass user@host pass@host && + ( + cd super && + git submodule add "$HTTPD_URL/auth/dumb/repo.git" sub && + git commit -m "add submodule" + ) +' + +test_expect_success 'cmdline credential config passes to submodule via clone' ' + set_askpass wrong pass@host && + test_must_fail git clone --recursive super super-clone && + rm -rf super-clone && + + set_askpass wrong pass@host && + git -c "credential.$HTTPD_URL.username=user@host" \ + clone --recursive super super-clone && + expect_askpass pass user@host +' + +test_expect_success 'cmdline credential config passes submodule via fetch' ' + set_askpass wrong pass@host && + test_must_fail git -C super-clone fetch --recurse-submodules && + + set_askpass wrong pass@host && + git -C super-clone \ + -c "credential.$HTTPD_URL.username=user@host" \ + fetch --recurse-submodules && + expect_askpass pass user@host +' + +test_expect_success 'cmdline credential config passes submodule update' ' + # advance the submodule HEAD so that a fetch is required + git commit --allow-empty -m foo && + git push "$HTTPD_DOCUMENT_ROOT_PATH/auth/dumb/repo.git" HEAD && + sha1=$(git rev-parse HEAD) && + git -C super-clone update-index --cacheinfo 160000,$sha1,sub && + + set_askpass wrong pass@host && + test_must_fail git -C super-clone submodule update && + + set_askpass wrong pass@host && + git -C super-clone \ + -c "credential.$HTTPD_URL.username=user@host" \ + submodule update && + expect_askpass pass user@host +' + test_expect_success 'fetch changes via http' ' echo content >>file && git commit -a -m two && @@ -132,7 +181,7 @@ test_expect_success 'fetch packed objects' ' test_expect_success 'fetch notices corrupt pack' ' cp -R "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad1.git && (cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad1.git && - p=`ls objects/pack/pack-*.pack` && + p=$(ls objects/pack/pack-*.pack) && chmod u+w $p && printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc ) && @@ -140,14 +189,14 @@ test_expect_success 'fetch notices corrupt pack' ' (cd repo_bad1.git && git --bare init && test_must_fail git --bare fetch $HTTPD_URL/dumb/repo_bad1.git && - test 0 = `ls objects/pack/pack-*.pack | wc -l` + test 0 = $(ls objects/pack/pack-*.pack | wc -l) ) ' test_expect_success 'fetch notices corrupt idx' ' cp -R "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad2.git && (cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad2.git && - p=`ls objects/pack/pack-*.idx` && + p=$(ls objects/pack/pack-*.idx) && chmod u+w $p && printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc ) && @@ -155,7 +204,7 @@ test_expect_success 'fetch notices corrupt idx' ' (cd repo_bad2.git && git --bare init && test_must_fail git --bare fetch $HTTPD_URL/dumb/repo_bad2.git && - test 0 = `ls objects/pack | wc -l` + test 0 = $(ls objects/pack | wc -l) ) ' @@ -214,15 +263,15 @@ check_language () { >expect ;; ?*) - echo "Accept-Language: $1" >expect + echo "=> Send header: Accept-Language: $1" >expect ;; esac && - GIT_CURL_VERBOSE=1 \ + GIT_TRACE_CURL=true \ LANGUAGE=$2 \ git ls-remote "$HTTPD_URL/dumb/repo.git" >output 2>&1 && tr -d '\015' <output | sort -u | - sed -ne '/^Accept-Language:/ p' >actual && + sed -ne '/^=> Send header: Accept-Language:/ p' >actual && test_cmp expect actual } @@ -246,8 +295,87 @@ ja;q=0.95, zh;q=0.94, sv;q=0.93, pt;q=0.92, nb;q=0.91, *;q=0.90" \ ' test_expect_success 'git client does not send an empty Accept-Language' ' - GIT_CURL_VERBOSE=1 LANGUAGE= git ls-remote "$HTTPD_URL/dumb/repo.git" 2>stderr && - ! grep "^Accept-Language:" stderr + GIT_TRACE_CURL=true LANGUAGE= git ls-remote "$HTTPD_URL/dumb/repo.git" 2>stderr && + ! grep "^=> Send header: Accept-Language:" stderr +' + +test_expect_success 'remote-http complains cleanly about malformed urls' ' + # do not actually issue "list" or other commands, as we do not + # want to rely on what curl would actually do with such a broken + # URL. This is just about making sure we do not segfault during + # initialization. + test_must_fail git remote-http http::/example.com/repo.git +' + +test_expect_success 'redirects can be forbidden/allowed' ' + test_must_fail git -c http.followRedirects=false \ + clone $HTTPD_URL/dumb-redir/repo.git dumb-redir && + git -c http.followRedirects=true \ + clone $HTTPD_URL/dumb-redir/repo.git dumb-redir 2>stderr +' + +test_expect_success 'redirects are reported to stderr' ' + # just look for a snippet of the redirected-to URL + test_i18ngrep /dumb/ stderr +' + +test_expect_success 'non-initial redirects can be forbidden' ' + test_must_fail git -c http.followRedirects=initial \ + clone $HTTPD_URL/redir-objects/repo.git redir-objects && + git -c http.followRedirects=true \ + clone $HTTPD_URL/redir-objects/repo.git redir-objects +' + +test_expect_success 'http.followRedirects defaults to "initial"' ' + test_must_fail git clone $HTTPD_URL/redir-objects/repo.git default +' + +# The goal is for a clone of the "evil" repository, which has no objects +# itself, to cause the client to fetch objects from the "victim" repository. +test_expect_success 'set up evil alternates scheme' ' + victim=$HTTPD_DOCUMENT_ROOT_PATH/victim.git && + git init --bare "$victim" && + git -C "$victim" --work-tree=. commit --allow-empty -m secret && + git -C "$victim" repack -ad && + git -C "$victim" update-server-info && + sha1=$(git -C "$victim" rev-parse HEAD) && + + evil=$HTTPD_DOCUMENT_ROOT_PATH/evil.git && + git init --bare "$evil" && + # do this by hand to avoid object existence check + printf "%s\\t%s\\n" $sha1 refs/heads/master >"$evil/info/refs" +' + +# Here we'll just redirect via HTTP. In a real-world attack these would be on +# different servers, but we should reject it either way. +test_expect_success 'http-alternates is a non-initial redirect' ' + echo "$HTTPD_URL/dumb/victim.git/objects" \ + >"$evil/objects/info/http-alternates" && + test_must_fail git -c http.followRedirects=initial \ + clone $HTTPD_URL/dumb/evil.git evil-initial && + git -c http.followRedirects=true \ + clone $HTTPD_URL/dumb/evil.git evil-initial +' + +# Curl supports a lot of protocols that we'd prefer not to allow +# http-alternates to use, but it's hard to test whether curl has +# accessed, say, the SMTP protocol, because we are not running an SMTP server. +# But we can check that it does not allow access to file://, which would +# otherwise allow this clone to complete. +test_expect_success 'http-alternates cannot point at funny protocols' ' + echo "file://$victim/objects" >"$evil/objects/info/http-alternates" && + test_must_fail git -c http.followRedirects=true \ + clone "$HTTPD_URL/dumb/evil.git" evil-file +' + +test_expect_success 'http-alternates triggers not-from-user protocol check' ' + echo "$HTTPD_URL/dumb/victim.git/objects" \ + >"$evil/objects/info/http-alternates" && + test_config_global http.followRedirects true && + test_must_fail git -c protocol.http.allow=user \ + clone $HTTPD_URL/dumb/evil.git evil-user && + git -c protocol.http.allow=always \ + clone $HTTPD_URL/dumb/evil.git evil-user ' stop_httpd diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index 58207d8825..a51b7e20d3 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -43,12 +43,21 @@ cat >exp <<EOF < Content-Type: application/x-git-upload-pack-result EOF test_expect_success 'clone http repository' ' - GIT_CURL_VERBOSE=1 git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && + GIT_TRACE_CURL=true git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && test_cmp file clone/file && tr '\''\015'\'' Q <err | sed -e " s/Q\$// /^[*] /d + /^== Info:/d + /^=> Send header, /d + /^=> Send header:$/d + /^<= Recv header, /d + /^<= Recv header:$/d + s/=> Send header: // + s/= Recv header:// + /^<= Recv data/d + /^=> Send data/d /^$/d /^< $/d @@ -110,6 +119,10 @@ test_expect_success 'redirects re-root further requests' ' git clone $HTTPD_URL/smart-redir-limited/repo.git repo-redir-limited ' +test_expect_success 're-rooting dies on insane schemes' ' + test_must_fail git clone $HTTPD_URL/insane-redir/repo.git insane +' + test_expect_success 'clone from password-protected repository' ' echo two >expect && set_askpass user@host pass@host && @@ -261,12 +274,64 @@ test_expect_success CMDLINE_LIMIT \ ' test_expect_success 'large fetch-pack requests can be split across POSTs' ' - GIT_CURL_VERBOSE=1 git -c http.postbuffer=65536 \ + GIT_TRACE_CURL=true git -c http.postbuffer=65536 \ clone --bare "$HTTPD_URL/smart/repo.git" split.git 2>err && - grep "^> POST" err >posts && + grep "^=> Send header: POST" err >posts && test_line_count = 2 posts ' +test_expect_success 'test allowreachablesha1inwant' ' + test_when_finished "rm -rf test_reachable.git" && + server="$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + master_sha=$(git -C "$server" rev-parse refs/heads/master) && + git -C "$server" config uploadpack.allowreachablesha1inwant 1 && + + git init --bare test_reachable.git && + git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && + git -C test_reachable.git fetch origin "$master_sha" +' + +test_expect_success 'test allowreachablesha1inwant with unreachable' ' + test_when_finished "rm -rf test_reachable.git; git reset --hard $(git rev-parse HEAD)" && + + #create unreachable sha + echo content >file2 && + git add file2 && + git commit -m two && + git push public HEAD:refs/heads/doomed && + git push public :refs/heads/doomed && + + server="$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + master_sha=$(git -C "$server" rev-parse refs/heads/master) && + git -C "$server" config uploadpack.allowreachablesha1inwant 1 && + + git init --bare test_reachable.git && + git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && + test_must_fail git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" +' + +test_expect_success 'test allowanysha1inwant with unreachable' ' + test_when_finished "rm -rf test_reachable.git; git reset --hard $(git rev-parse HEAD)" && + + #create unreachable sha + echo content >file2 && + git add file2 && + git commit -m two && + git push public HEAD:refs/heads/doomed && + git push public :refs/heads/doomed && + + server="$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + master_sha=$(git -C "$server" rev-parse refs/heads/master) && + git -C "$server" config uploadpack.allowreachablesha1inwant 1 && + + git init --bare test_reachable.git && + git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && + test_must_fail git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" && + + git -C "$server" config uploadpack.allowanysha1inwant 1 && + git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" +' + test_expect_success EXPENSIVE 'http can handle enormous ref negotiation' ' ( cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && @@ -282,5 +347,22 @@ test_expect_success EXPENSIVE 'http can handle enormous ref negotiation' ' test_line_count = 100000 tags ' +test_expect_success 'custom http headers' ' + test_must_fail git -c http.extraheader="x-magic-two: cadabra" \ + fetch "$HTTPD_URL/smart_headers/repo.git" && + git -c http.extraheader="x-magic-one: abra" \ + -c http.extraheader="x-magic-two: cadabra" \ + fetch "$HTTPD_URL/smart_headers/repo.git" && + git update-index --add --cacheinfo 160000,$(git rev-parse HEAD),sub && + git config -f .gitmodules submodule.sub.path sub && + git config -f .gitmodules submodule.sub.url \ + "$HTTPD_URL/smart_headers/repo.git" && + git submodule init sub && + test_must_fail git submodule update sub && + git -c http.extraheader="x-magic-one: abra" \ + -c http.extraheader="x-magic-two: cadabra" \ + submodule update sub +' + stop_httpd test_done diff --git a/t/t5560-http-backend-noserver.sh b/t/t5560-http-backend-noserver.sh index aa73eeaef8..9fafcf1945 100755 --- a/t/t5560-http-backend-noserver.sh +++ b/t/t5560-http-backend-noserver.sh @@ -44,10 +44,6 @@ POST() { test_cmp exp act } -log_div() { - return 0 -} - . "$TEST_DIRECTORY"/t556x_common expect_aliased() { diff --git a/t/t5561-http-backend.sh b/t/t5561-http-backend.sh index 19afe96698..90e0d6f0fe 100755 --- a/t/t5561-http-backend.sh +++ b/t/t5561-http-backend.sh @@ -29,15 +29,9 @@ POST() { test_cmp exp act } -log_div() { - echo >>"$HTTPD_ROOT_PATH"/access.log - echo "### $1" >>"$HTTPD_ROOT_PATH"/access.log - echo "###" >>"$HTTPD_ROOT_PATH"/access.log -} - . "$TEST_DIRECTORY"/t556x_common -cat >exp <<EOF +grep '^[^#]' >exp <<EOF ### refs/heads/master ### diff --git a/t/t556x_common b/t/t556x_common index 82926cfdb7..359fcfe32b 100755 --- a/t/t556x_common +++ b/t/t556x_common @@ -52,21 +52,17 @@ get_static_files() { SMART=smart GIT_HTTP_EXPORT_ALL=1 && export GIT_HTTP_EXPORT_ALL test_expect_success 'direct refs/heads/master not found' ' - log_div "refs/heads/master" && GET refs/heads/master "404 Not Found" ' test_expect_success 'static file is ok' ' - log_div "getanyfile default" && get_static_files "200 OK" ' SMART=smart_noexport unset GIT_HTTP_EXPORT_ALL test_expect_success 'no export by default' ' - log_div "no git-daemon-export-ok" && get_static_files "404 Not Found" ' test_expect_success 'export if git-daemon-export-ok' ' - log_div "git-daemon-export-ok" && (cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && touch git-daemon-export-ok ) && @@ -75,47 +71,39 @@ test_expect_success 'export if git-daemon-export-ok' ' SMART=smart GIT_HTTP_EXPORT_ALL=1 && export GIT_HTTP_EXPORT_ALL test_expect_success 'static file if http.getanyfile true is ok' ' - log_div "getanyfile true" && config http.getanyfile true && get_static_files "200 OK" ' test_expect_success 'static file if http.getanyfile false fails' ' - log_div "getanyfile false" && config http.getanyfile false && get_static_files "403 Forbidden" ' test_expect_success 'http.uploadpack default enabled' ' - log_div "uploadpack default" && GET info/refs?service=git-upload-pack "200 OK" && POST git-upload-pack 0000 "200 OK" ' test_expect_success 'http.uploadpack true' ' - log_div "uploadpack true" && config http.uploadpack true && GET info/refs?service=git-upload-pack "200 OK" && POST git-upload-pack 0000 "200 OK" ' test_expect_success 'http.uploadpack false' ' - log_div "uploadpack false" && config http.uploadpack false && GET info/refs?service=git-upload-pack "403 Forbidden" && POST git-upload-pack 0000 "403 Forbidden" ' test_expect_success 'http.receivepack default disabled' ' - log_div "receivepack default" && GET info/refs?service=git-receive-pack "403 Forbidden" && POST git-receive-pack 0000 "403 Forbidden" ' test_expect_success 'http.receivepack true' ' - log_div "receivepack true" && config http.receivepack true && GET info/refs?service=git-receive-pack "200 OK" && POST git-receive-pack 0000 "200 OK" ' test_expect_success 'http.receivepack false' ' - log_div "receivepack false" && config http.receivepack false && GET info/refs?service=git-receive-pack "403 Forbidden" && POST git-receive-pack 0000 "403 Forbidden" diff --git a/t/t5570-git-daemon.sh b/t/t5570-git-daemon.sh index b7e283252d..225a022e8a 100755 --- a/t/t5570-git-daemon.sh +++ b/t/t5570-git-daemon.sh @@ -6,6 +6,12 @@ test_description='test fetching over git protocol' . "$TEST_DIRECTORY"/lib-git-daemon.sh start_git_daemon +check_verbose_connect () { + grep -F "Looking up 127.0.0.1 ..." stderr && + grep -F "Connecting to 127.0.0.1 (port " stderr && + grep -F "done." stderr +} + test_expect_success 'setup repository' ' git config push.default matching && echo content >file && @@ -24,7 +30,8 @@ test_expect_success 'create git-accessible bare repository' ' ' test_expect_success 'clone git repository' ' - git clone "$GIT_DAEMON_URL/repo.git" clone && + git clone -v "$GIT_DAEMON_URL/repo.git" clone 2>stderr && + check_verbose_connect && test_cmp file clone/file ' @@ -32,10 +39,21 @@ test_expect_success 'fetch changes via git protocol' ' echo content >>file && git commit -a -m two && git push public && - (cd clone && git pull) && + (cd clone && git pull -v) 2>stderr && + check_verbose_connect && test_cmp file clone/file ' +test_expect_success 'no-op fetch -v stderr is as expected' ' + (cd clone && git fetch -v) 2>stderr && + check_verbose_connect +' + +test_expect_success 'no-op fetch without "-v" is quiet' ' + (cd clone && git fetch) 2>stderr && + ! test -s stderr +' + test_expect_success 'remote detects correct HEAD' ' git push public master:other && (cd clone && @@ -57,7 +75,7 @@ test_expect_success 'prepare pack objects' ' test_expect_success 'fetch notices corrupt pack' ' cp -R "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_pack.git "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_bad1.git && (cd "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_bad1.git && - p=`ls objects/pack/pack-*.pack` && + p=$(ls objects/pack/pack-*.pack) && chmod u+w $p && printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc ) && @@ -65,14 +83,14 @@ test_expect_success 'fetch notices corrupt pack' ' (cd repo_bad1.git && git --bare init && test_must_fail git --bare fetch "$GIT_DAEMON_URL/repo_bad1.git" && - test 0 = `ls objects/pack/pack-*.pack | wc -l` + test 0 = $(ls objects/pack/pack-*.pack | wc -l) ) ' test_expect_success 'fetch notices corrupt idx' ' cp -R "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_pack.git "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_bad2.git && (cd "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_bad2.git && - p=`ls objects/pack/pack-*.idx` && + p=$(ls objects/pack/pack-*.idx) && chmod u+w $p && printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc ) && @@ -80,7 +98,7 @@ test_expect_success 'fetch notices corrupt idx' ' (cd repo_bad2.git && git --bare init && test_must_fail git --bare fetch "$GIT_DAEMON_URL/repo_bad2.git" && - test 0 = `ls objects/pack | wc -l` + test 0 = $(ls objects/pack | wc -l) ) ' diff --git a/t/t5571-pre-push-hook.sh b/t/t5571-pre-push-hook.sh index 6f9916a390..ba975bb355 100755 --- a/t/t5571-pre-push-hook.sh +++ b/t/t5571-pre-push-hook.sh @@ -109,23 +109,20 @@ test_expect_success 'push to URL' ' diff expected actual ' -# Test that filling pipe buffers doesn't cause failure -# Too slow to leave enabled for general use -if false -then - printf 'parent1\nrepo1\n' >expected - nr=1000 - while test $nr -lt 2000 - do - nr=$(( $nr + 1 )) - git branch b/$nr $COMMIT3 - echo "refs/heads/b/$nr $COMMIT3 refs/heads/b/$nr $_z40" >>expected - done - - test_expect_success 'push many refs' ' - git push parent1 "refs/heads/b/*:refs/heads/b/*" && - diff expected actual - ' -fi +test_expect_success 'set up many-ref tests' ' + { + nr=1000 + while test $nr -lt 2000 + do + nr=$(( $nr + 1 )) + echo "create refs/heads/b/$nr $COMMIT3" + done + } | git update-ref --stdin +' + +test_expect_success 'sigpipe does not cause pre-push hook failure' ' + echo "exit 0" | write_script "$HOOK" && + git push parent1 "refs/heads/b/*:refs/heads/b/*" +' test_done diff --git a/t/t5580-clone-push-unc.sh b/t/t5580-clone-push-unc.sh new file mode 100755 index 0000000000..b195f71ea9 --- /dev/null +++ b/t/t5580-clone-push-unc.sh @@ -0,0 +1,48 @@ +#!/bin/sh + +test_description='various UNC path tests (Windows-only)' +. ./test-lib.sh + +if ! test_have_prereq MINGW; then + skip_all='skipping UNC path tests, requires Windows' + test_done +fi + +UNCPATH="$(pwd)" +case "$UNCPATH" in +[A-Z]:*) + # Use administrative share e.g. \\localhost\C$\git-sdk-64\usr\src\git + # (we use forward slashes here because MSYS2 and Git accept them, and + # they are easier on the eyes) + UNCPATH="//localhost/${UNCPATH%%:*}\$/${UNCPATH#?:}" + test -d "$UNCPATH" || { + skip_all='could not access administrative share; skipping' + test_done + } + ;; +*) + skip_all='skipping UNC path tests, cannot determine current path as UNC' + test_done + ;; +esac + +test_expect_success setup ' + test_commit initial +' + +test_expect_success clone ' + git clone "file://$UNCPATH" clone +' + +test_expect_success push ' + ( + cd clone && + git checkout -b to-push && + test_commit to-push && + git push origin HEAD + ) && + rev="$(git -C clone rev-parse --verify refs/heads/to-push)" && + test "$rev" = "$(git rev-parse --verify refs/heads/to-push)" +' + +test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index bfdaf75966..4241ea5b32 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -4,6 +4,9 @@ test_description=clone . ./test-lib.sh +X= +test_have_prereq !MINGW || X=.exe + test_expect_success setup ' rm -fr .git && @@ -65,6 +68,29 @@ test_expect_success 'clone respects GIT_WORK_TREE' ' ' +test_expect_success 'clone from hooks' ' + + test_create_repo r0 && + cd r0 && + test_commit initial && + cd .. && + git init r1 && + cd r1 && + cat >.git/hooks/pre-commit <<-\EOF && + #!/bin/sh + git clone ../r0 ../r2 + exit 1 + EOF + chmod u+x .git/hooks/pre-commit && + : >file && + git add file && + test_must_fail git commit -m invoke-hook && + cd .. && + test_cmp r0/.git/HEAD r2/.git/HEAD && + test_cmp r0/initial.t r2/initial.t + +' + test_expect_success 'clone creates intermediate directories' ' git clone src long/path/to/dst && @@ -125,7 +151,7 @@ test_expect_success 'clone --mirror does not repeat tags' ' git clone --mirror src mirror2 && (cd mirror2 && git show-ref 2> clone.err > clone.out) && - test_must_fail grep Duplicate mirror2/clone.err && + ! grep Duplicate mirror2/clone.err && grep some-tag mirror2/clone.out ' @@ -221,7 +247,7 @@ test_expect_success 'clone separate gitdir' ' ' test_expect_success 'clone separate gitdir: output' ' - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected dst/.git ' @@ -282,14 +308,9 @@ test_expect_success 'clone checking out a tag' ' setup_ssh_wrapper () { test_expect_success 'setup ssh wrapper' ' - write_script "$TRASH_DIRECTORY/ssh-wrapper" <<-\EOF && - echo >>"$TRASH_DIRECTORY/ssh-output" "ssh: $*" && - # throw away all but the last argument, which should be the - # command - while test $# -gt 1; do shift; done - eval "$1" - EOF - GIT_SSH="$TRASH_DIRECTORY/ssh-wrapper" && + cp "$GIT_BUILD_DIR/t/helper/test-fake-ssh$X" \ + "$TRASH_DIRECTORY/ssh-wrapper$X" && + GIT_SSH="$TRASH_DIRECTORY/ssh-wrapper$X" && export GIT_SSH && export TRASH_DIRECTORY && >"$TRASH_DIRECTORY"/ssh-output @@ -297,8 +318,8 @@ setup_ssh_wrapper () { } copy_ssh_wrapper_as () { - cp "$TRASH_DIRECTORY/ssh-wrapper" "$1" && - GIT_SSH="$1" && + cp "$TRASH_DIRECTORY/ssh-wrapper$X" "${1%$X}$X" && + GIT_SSH="${1%$X}$X" && export GIT_SSH } @@ -445,7 +466,7 @@ test_expect_success 'clone ssh://host.xz:22/~repo' ' #IPv6 for tuah in ::1 [::1] [::1]: user@::1 user@[::1] user@[::1]: [user@::1] [user@::1]: do - ehost=$(echo $tuah | sed -e "s/1]:/1]/ "| tr -d "[]") + ehost=$(echo $tuah | sed -e "s/1]:/1]/" | tr -d "[]") test_expect_success "clone ssh://$tuah/home/user/repo" " test_clone_url ssh://$tuah/home/user/repo $ehost /home/user/repo " @@ -496,4 +517,11 @@ test_expect_success 'shallow clone locally' ' ( cd ddsstt && git fsck ) ' +test_expect_success 'GIT_TRACE_PACKFILE produces a usable pack' ' + rm -rf dst.git && + GIT_TRACE_PACKFILE=$PWD/tmp.pack git clone --no-local --bare src dst.git && + git init --bare replay.git && + git -C replay.git index-pack -v --stdin <tmp.pack +' + test_done diff --git a/t/t5603-clone-dirname.sh b/t/t5603-clone-dirname.sh new file mode 100755 index 0000000000..d5af758129 --- /dev/null +++ b/t/t5603-clone-dirname.sh @@ -0,0 +1,106 @@ +#!/bin/sh + +test_description='check output directory names used by git-clone' +. ./test-lib.sh + +# we use a fake ssh wrapper that ignores the arguments +# entirely; we really only care that we get _some_ repo, +# as the real test is what clone does on the local side +test_expect_success 'setup ssh wrapper' ' + write_script "$TRASH_DIRECTORY/ssh-wrapper" <<-\EOF && + git upload-pack "$TRASH_DIRECTORY" + EOF + GIT_SSH="$TRASH_DIRECTORY/ssh-wrapper" && + export GIT_SSH && + export TRASH_DIRECTORY +' + +# make sure that cloning $1 results in local directory $2 +test_clone_dir () { + url=$1; shift + dir=$1; shift + expect=success + bare=non-bare + clone_opts= + for i in "$@" + do + case "$i" in + fail) + expect=failure + ;; + bare) + bare=bare + clone_opts=--bare + ;; + esac + done + test_expect_$expect "clone of $url goes to $dir ($bare)" " + rm -rf $dir && + git clone $clone_opts $url && + test_path_is_dir $dir + " +} + +# basic syntax with bare and non-bare variants +test_clone_dir host:foo foo +test_clone_dir host:foo foo.git bare +test_clone_dir host:foo.git foo +test_clone_dir host:foo.git foo.git bare +test_clone_dir host:foo/.git foo +test_clone_dir host:foo/.git foo.git bare + +# similar, but using ssh URL rather than host:path syntax +test_clone_dir ssh://host/foo foo +test_clone_dir ssh://host/foo foo.git bare +test_clone_dir ssh://host/foo.git foo +test_clone_dir ssh://host/foo.git foo.git bare +test_clone_dir ssh://host/foo/.git foo +test_clone_dir ssh://host/foo/.git foo.git bare + +# we should remove trailing slashes and .git suffixes +test_clone_dir ssh://host/foo/ foo +test_clone_dir ssh://host/foo/// foo +test_clone_dir ssh://host/foo/.git/ foo +test_clone_dir ssh://host/foo.git/ foo +test_clone_dir ssh://host/foo.git/// foo +test_clone_dir ssh://host/foo///.git/ foo +test_clone_dir ssh://host/foo/.git/// foo + +test_clone_dir host:foo/ foo +test_clone_dir host:foo/// foo +test_clone_dir host:foo.git/ foo +test_clone_dir host:foo/.git/ foo +test_clone_dir host:foo.git/// foo +test_clone_dir host:foo///.git/ foo +test_clone_dir host:foo/.git/// foo + +# omitting the path should default to the hostname +test_clone_dir ssh://host/ host +test_clone_dir ssh://host:1234/ host +test_clone_dir ssh://user@host/ host +test_clone_dir host:/ host + +# auth materials should be redacted +test_clone_dir ssh://user:password@host/ host +test_clone_dir ssh://user:password@host:1234/ host +test_clone_dir ssh://user:passw@rd@host:1234/ host +test_clone_dir user@host:/ host +test_clone_dir user:password@host:/ host +test_clone_dir user:passw@rd@host:/ host + +# auth-like material should not be dropped +test_clone_dir ssh://host/foo@bar foo@bar +test_clone_dir ssh://host/foo@bar.git foo@bar +test_clone_dir ssh://user:password@host/foo@bar foo@bar +test_clone_dir ssh://user:passw@rd@host/foo@bar.git foo@bar + +test_clone_dir host:/foo@bar foo@bar +test_clone_dir host:/foo@bar.git foo@bar +test_clone_dir user:password@host:/foo@bar foo@bar +test_clone_dir user:passw@rd@host:/foo@bar.git foo@bar + +# trailing port-like numbers should not be stripped for paths +test_clone_dir ssh://user:password@host/test:1234 1234 +test_clone_dir ssh://user:password@host/test:1234.git 1234 + +test_done diff --git a/t/t5604-clone-reference.sh b/t/t5604-clone-reference.sh new file mode 100755 index 0000000000..4320082b1b --- /dev/null +++ b/t/t5604-clone-reference.sh @@ -0,0 +1,224 @@ +#!/bin/sh +# +# Copyright (C) 2006 Martin Waitz <tali@admingilde.org> +# + +test_description='test clone --reference' +. ./test-lib.sh + +base_dir=$(pwd) + +U=$base_dir/UPLOAD_LOG + +# create a commit in repo $1 with name $2 +commit_in () { + ( + cd "$1" && + echo "$2" >"$2" && + git add "$2" && + git commit -m "$2" + ) +} + +# check that there are $2 loose objects in repo $1 +test_objcount () { + echo "$2" >expect && + git -C "$1" count-objects >actual.raw && + cut -d' ' -f1 <actual.raw >actual && + test_cmp expect actual +} + +test_expect_success 'preparing first repository' ' + test_create_repo A && + commit_in A file1 +' + +test_expect_success 'preparing second repository' ' + git clone A B && + commit_in B file2 && + git -C B repack -ad && + git -C B prune +' + +test_expect_success 'cloning with reference (-l -s)' ' + git clone -l -s --reference B A C +' + +test_expect_success 'existence of info/alternates' ' + test_line_count = 2 C/.git/objects/info/alternates +' + +test_expect_success 'pulling from reference' ' + git -C C pull ../B master +' + +test_expect_success 'that reference gets used' ' + test_objcount C 0 +' + +test_expect_success 'cloning with reference (no -l -s)' ' + GIT_TRACE_PACKET=$U.D git clone --reference B "file://$(pwd)/A" D +' + +test_expect_success 'fetched no objects' ' + test -s "$U.D" && + ! grep " want" "$U.D" +' + +test_expect_success 'existence of info/alternates' ' + test_line_count = 1 D/.git/objects/info/alternates +' + +test_expect_success 'pulling from reference' ' + git -C D pull ../B master +' + +test_expect_success 'that reference gets used' ' + test_objcount D 0 +' + +test_expect_success 'updating origin' ' + commit_in A file3 && + git -C A repack -ad && + git -C A prune +' + +test_expect_success 'pulling changes from origin' ' + git -C C pull origin +' + +# the 2 local objects are commit and tree from the merge +test_expect_success 'that alternate to origin gets used' ' + test_objcount C 2 +' + +test_expect_success 'pulling changes from origin' ' + git -C D pull origin +' + +# the 5 local objects are expected; file3 blob, commit in A to add it +# and its tree, and 2 are our tree and the merge commit. +test_expect_success 'check objects expected to exist locally' ' + test_objcount D 5 +' + +test_expect_success 'preparing alternate repository #1' ' + test_create_repo F && + commit_in F file1 +' + +test_expect_success 'cloning alternate repo #2 and adding changes to repo #1' ' + git clone F G && + commit_in F file2 +' + +test_expect_success 'cloning alternate repo #1, using #2 as reference' ' + git clone --reference G F H +' + +test_expect_success 'cloning with reference being subset of source (-l -s)' ' + git clone -l -s --reference A B E +' + +test_expect_success 'cloning with multiple references drops duplicates' ' + git clone -s --reference B --reference A --reference B A dups && + test_line_count = 2 dups/.git/objects/info/alternates +' + +test_expect_success 'clone with reference from a tagged repository' ' + ( + cd A && git tag -a -m tagged HEAD + ) && + git clone --reference=A A I +' + +test_expect_success 'prepare branched repository' ' + git clone A J && + ( + cd J && + git checkout -b other master^ && + echo other >otherfile && + git add otherfile && + git commit -m other && + git checkout master + ) +' + +test_expect_success 'fetch with incomplete alternates' ' + git init K && + echo "$base_dir/A/.git/objects" >K/.git/objects/info/alternates && + ( + cd K && + git remote add J "file://$base_dir/J" && + GIT_TRACE_PACKET=$U.K git fetch J + ) && + master_object=$(cd A && git for-each-ref --format="%(objectname)" refs/heads/master) && + test -s "$U.K" && + ! grep " want $master_object" "$U.K" && + tag_object=$(cd A && git for-each-ref --format="%(objectname)" refs/tags/HEAD) && + ! grep " want $tag_object" "$U.K" +' + +test_expect_success 'clone using repo with gitfile as a reference' ' + git clone --separate-git-dir=L A M && + git clone --reference=M A N && + echo "$base_dir/L/objects" >expected && + test_cmp expected "$base_dir/N/.git/objects/info/alternates" +' + +test_expect_success 'clone using repo pointed at by gitfile as reference' ' + git clone --reference=M/.git A O && + echo "$base_dir/L/objects" >expected && + test_cmp expected "$base_dir/O/.git/objects/info/alternates" +' + +test_expect_success 'clone and dissociate from reference' ' + git init P && + ( + cd P && test_commit one + ) && + git clone P Q && + ( + cd Q && test_commit two + ) && + git clone --no-local --reference=P Q R && + git clone --no-local --reference=P --dissociate Q S && + # removing the reference P would corrupt R but not S + rm -fr P && + test_must_fail git -C R fsck && + git -C S fsck +' +test_expect_success 'clone, dissociate from partial reference and repack' ' + rm -fr P Q R && + git init P && + ( + cd P && + test_commit one && + git repack && + test_commit two && + git repack + ) && + git clone --bare P Q && + ( + cd P && + git checkout -b second && + test_commit three && + git repack + ) && + git clone --bare --dissociate --reference=P Q R && + ls R/objects/pack/*.pack >packs.txt && + test_line_count = 1 packs.txt +' + +test_expect_success 'clone, dissociate from alternates' ' + rm -fr A B C && + test_create_repo A && + commit_in A file1 && + git clone --reference=A A B && + test_line_count = 1 B/.git/objects/info/alternates && + git clone --local --dissociate B C && + ! test -f C/.git/objects/info/alternates && + ( cd C && git fsck ) +' + +test_done diff --git a/t/t5701-clone-local.sh b/t/t5605-clone-local.sh index 3c087e907c..3c087e907c 100755 --- a/t/t5701-clone-local.sh +++ b/t/t5605-clone-local.sh diff --git a/t/t5702-clone-options.sh b/t/t5606-clone-options.sh index 9e24ec88e6..9e24ec88e6 100755 --- a/t/t5702-clone-options.sh +++ b/t/t5606-clone-options.sh diff --git a/t/t5704-bundle.sh b/t/t5607-clone-bundle.sh index 348d9b3bc7..348d9b3bc7 100755 --- a/t/t5704-bundle.sh +++ b/t/t5607-clone-bundle.sh diff --git a/t/t5705-clone-2gb.sh b/t/t5608-clone-2gb.sh index 191d6d3a78..191d6d3a78 100755 --- a/t/t5705-clone-2gb.sh +++ b/t/t5608-clone-2gb.sh diff --git a/t/t5706-clone-branch.sh b/t/t5609-clone-branch.sh index 6e7a7be052..6e7a7be052 100755 --- a/t/t5706-clone-branch.sh +++ b/t/t5609-clone-branch.sh diff --git a/t/t5707-clone-detached.sh b/t/t5610-clone-detached.sh index 8b0d607df1..8b0d607df1 100755 --- a/t/t5707-clone-detached.sh +++ b/t/t5610-clone-detached.sh diff --git a/t/t5708-clone-config.sh b/t/t5611-clone-config.sh index 27d730c0a7..e4850b778c 100755 --- a/t/t5708-clone-config.sh +++ b/t/t5611-clone-config.sh @@ -37,4 +37,24 @@ test_expect_success 'clone -c config is available during clone' ' test_cmp expect child/file ' +# Tests for the hidden file attribute on windows +is_hidden () { + # Use the output of `attrib`, ignore the absolute path + case "$(attrib "$1")" in *H*?:*) return 0;; esac + return 1 +} + +test_expect_success MINGW 'clone -c core.hideDotFiles' ' + test_commit attributes .gitattributes "" && + rm -rf child && + git clone -c core.hideDotFiles=false . child && + ! is_hidden child/.gitattributes && + rm -rf child && + git clone -c core.hideDotFiles=dotGitOnly . child && + ! is_hidden child/.gitattributes && + rm -rf child && + git clone -c core.hideDotFiles=true . child && + is_hidden child/.gitattributes +' + test_done diff --git a/t/t5709-clone-refspec.sh b/t/t5612-clone-refspec.sh index 7ace2535c8..7ace2535c8 100755 --- a/t/t5709-clone-refspec.sh +++ b/t/t5612-clone-refspec.sh diff --git a/t/t5613-info-alternate.sh b/t/t5613-info-alternate.sh new file mode 100755 index 0000000000..895f46bb91 --- /dev/null +++ b/t/t5613-info-alternate.sh @@ -0,0 +1,139 @@ +#!/bin/sh +# +# Copyright (C) 2006 Martin Waitz <tali@admingilde.org> +# + +test_description='test transitive info/alternate entries' +. ./test-lib.sh + +test_expect_success 'preparing first repository' ' + test_create_repo A && ( + cd A && + echo "Hello World" > file1 && + git add file1 && + git commit -m "Initial commit" file1 && + git repack -a -d && + git prune + ) +' + +test_expect_success 'preparing second repository' ' + git clone -l -s A B && ( + cd B && + echo "foo bar" > file2 && + git add file2 && + git commit -m "next commit" file2 && + git repack -a -d -l && + git prune + ) +' + +test_expect_success 'preparing third repository' ' + git clone -l -s B C && ( + cd C && + echo "Goodbye, cruel world" > file3 && + git add file3 && + git commit -m "one more" file3 && + git repack -a -d -l && + git prune + ) +' + +test_expect_success 'count-objects shows the alternates' ' + cat >expect <<-EOF && + alternate: $(pwd)/B/.git/objects + alternate: $(pwd)/A/.git/objects + EOF + git -C C count-objects -v >actual && + grep ^alternate: actual >actual.alternates && + test_cmp expect actual.alternates +' + +# Note: These tests depend on the hard-coded value of 5 as the maximum depth +# we will follow recursion. We start the depth at 0 and count links, not +# repositories. This means that in a chain like: +# +# A --> B --> C --> D --> E --> F --> G --> H +# 0 1 2 3 4 5 6 +# +# we are OK at "G", but break at "H", even though "H" is actually the 8th +# repository, not the 6th, which you might expect. Counting the links allows +# N+1 repositories, and counting from 0 to 5 inclusive allows 6 links. +# +# Note also that we must use "--bare -l" to make the link to H. The "-l" +# ensures we do not do a connectivity check, and the "--bare" makes sure +# we do not try to checkout the result (which needs objects), either of +# which would cause the clone to fail. +test_expect_success 'creating too deep nesting' ' + git clone -l -s C D && + git clone -l -s D E && + git clone -l -s E F && + git clone -l -s F G && + git clone --bare -l -s G H +' + +test_expect_success 'validity of seventh repository' ' + git -C G fsck +' + +test_expect_success 'invalidity of eighth repository' ' + test_must_fail git -C H fsck +' + +test_expect_success 'breaking of loops' ' + echo "$(pwd)"/B/.git/objects >>A/.git/objects/info/alternates && + git -C C fsck +' + +test_expect_success 'that info/alternates is necessary' ' + rm -f C/.git/objects/info/alternates && + test_must_fail git -C C fsck +' + +test_expect_success 'that relative alternate is possible for current dir' ' + echo "../../../B/.git/objects" >C/.git/objects/info/alternates && + git fsck +' + +test_expect_success 'that relative alternate is recursive' ' + git -C D fsck +' + +# we can reach "A" from our new repo both directly, and via "C". +# The deep/subdir is there to make sure we are not doing a stupid +# pure-text comparison of the alternate names. +test_expect_success 'relative duplicates are eliminated' ' + mkdir -p deep/subdir && + git init --bare deep/subdir/duplicate.git && + cat >deep/subdir/duplicate.git/objects/info/alternates <<-\EOF && + ../../../../C/.git/objects + ../../../../A/.git/objects + EOF + cat >expect <<-EOF && + alternate: $(pwd)/C/.git/objects + alternate: $(pwd)/B/.git/objects + alternate: $(pwd)/A/.git/objects + EOF + git -C deep/subdir/duplicate.git count-objects -v >actual && + grep ^alternate: actual >actual.alternates && + test_cmp expect actual.alternates +' + +test_expect_success CASE_INSENSITIVE_FS 'dup finding can be case-insensitive' ' + git init --bare insensitive.git && + # the previous entry for "A" will have used uppercase + cat >insensitive.git/objects/info/alternates <<-\EOF && + ../../C/.git/objects + ../../a/.git/objects + EOF + cat >expect <<-EOF && + alternate: $(pwd)/C/.git/objects + alternate: $(pwd)/B/.git/objects + alternate: $(pwd)/A/.git/objects + EOF + git -C insensitive.git count-objects -v >actual && + grep ^alternate: actual >actual.alternates && + test_cmp expect actual.alternates +' + +test_done diff --git a/t/t5614-clone-submodules.sh b/t/t5614-clone-submodules.sh new file mode 100755 index 0000000000..a87d329656 --- /dev/null +++ b/t/t5614-clone-submodules.sh @@ -0,0 +1,122 @@ +#!/bin/sh + +test_description='Test shallow cloning of repos with submodules' + +. ./test-lib.sh + +pwd=$(pwd) + +test_expect_success 'setup' ' + git checkout -b master && + test_commit commit1 && + test_commit commit2 && + mkdir sub && + ( + cd sub && + git init && + test_commit subcommit1 && + test_commit subcommit2 && + test_commit subcommit3 + ) && + git submodule add "file://$pwd/sub" sub && + git commit -m "add submodule" +' + +test_expect_success 'nonshallow clone implies nonshallow submodule' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules "file://$pwd/." super_clone && + git -C super_clone log --oneline >lines && + test_line_count = 3 lines && + git -C super_clone/sub log --oneline >lines && + test_line_count = 3 lines +' + +test_expect_success 'shallow clone with shallow submodule' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --depth 2 --shallow-submodules "file://$pwd/." super_clone && + git -C super_clone log --oneline >lines && + test_line_count = 2 lines && + git -C super_clone/sub log --oneline >lines && + test_line_count = 1 lines +' + +test_expect_success 'shallow clone does not imply shallow submodule' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --depth 2 "file://$pwd/." super_clone && + git -C super_clone log --oneline >lines && + test_line_count = 2 lines && + git -C super_clone/sub log --oneline >lines && + test_line_count = 3 lines +' + +test_expect_success 'shallow clone with non shallow submodule' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --depth 2 --no-shallow-submodules "file://$pwd/." super_clone && + git -C super_clone log --oneline >lines && + test_line_count = 2 lines && + git -C super_clone/sub log --oneline >lines && + test_line_count = 3 lines +' + +test_expect_success 'non shallow clone with shallow submodule' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --no-local --shallow-submodules "file://$pwd/." super_clone && + git -C super_clone log --oneline >lines && + test_line_count = 3 lines && + git -C super_clone/sub log --oneline >lines && + test_line_count = 1 lines +' + +test_expect_success 'clone follows shallow recommendation' ' + test_when_finished "rm -rf super_clone" && + git config -f .gitmodules submodule.sub.shallow true && + git add .gitmodules && + git commit -m "recommed shallow for sub" && + git clone --recurse-submodules --no-local "file://$pwd/." super_clone && + ( + cd super_clone && + git log --oneline >lines && + test_line_count = 4 lines + ) && + ( + cd super_clone/sub && + git log --oneline >lines && + test_line_count = 1 lines + ) +' + +test_expect_success 'get unshallow recommended shallow submodule' ' + test_when_finished "rm -rf super_clone" && + git clone --no-local "file://$pwd/." super_clone && + ( + cd super_clone && + git submodule update --init --no-recommend-shallow && + git log --oneline >lines && + test_line_count = 4 lines + ) && + ( + cd super_clone/sub && + git log --oneline >lines && + test_line_count = 3 lines + ) +' + +test_expect_success 'clone follows non shallow recommendation' ' + test_when_finished "rm -rf super_clone" && + git config -f .gitmodules submodule.sub.shallow false && + git add .gitmodules && + git commit -m "recommed non shallow for sub" && + git clone --recurse-submodules --no-local "file://$pwd/." super_clone && + ( + cd super_clone && + git log --oneline >lines && + test_line_count = 5 lines + ) && + ( + cd super_clone/sub && + git log --oneline >lines && + test_line_count = 3 lines + ) +' + +test_done diff --git a/t/t5615-alternate-env.sh b/t/t5615-alternate-env.sh new file mode 100755 index 0000000000..26ebb0375d --- /dev/null +++ b/t/t5615-alternate-env.sh @@ -0,0 +1,89 @@ +#!/bin/sh + +test_description='handling of alternates in environment variables' +. ./test-lib.sh + +check_obj () { + alt=$1; shift + while read obj expect + do + echo "$obj" >&3 && + echo "$obj $expect" >&4 + done 3>input 4>expect && + GIT_ALTERNATE_OBJECT_DIRECTORIES=$alt \ + git "$@" cat-file --batch-check='%(objectname) %(objecttype)' \ + <input >actual && + test_cmp expect actual +} + +test_expect_success 'create alternate repositories' ' + git init --bare one.git && + one=$(echo one | git -C one.git hash-object -w --stdin) && + git init --bare two.git && + two=$(echo two | git -C two.git hash-object -w --stdin) +' + +test_expect_success 'objects inaccessible without alternates' ' + check_obj "" <<-EOF + $one missing + $two missing + EOF +' + +test_expect_success 'access alternate via absolute path' ' + check_obj "$PWD/one.git/objects" <<-EOF + $one blob + $two missing + EOF +' + +test_expect_success 'access multiple alternates' ' + check_obj "$PWD/one.git/objects:$PWD/two.git/objects" <<-EOF + $one blob + $two blob + EOF +' + +# bare paths are relative from $GIT_DIR +test_expect_success 'access alternate via relative path (bare)' ' + git init --bare bare.git && + check_obj "../one.git/objects" -C bare.git <<-EOF + $one blob + EOF +' + +# non-bare paths are relative to top of worktree +test_expect_success 'access alternate via relative path (worktree)' ' + git init worktree && + check_obj "../one.git/objects" -C worktree <<-EOF + $one blob + EOF +' + +# path is computed after moving to top-level of worktree +test_expect_success 'access alternate via relative path (subdir)' ' + mkdir subdir && + check_obj "one.git/objects" -C subdir <<-EOF + $one blob + EOF +' + +# set variables outside test to avoid quote insanity; the \057 is '/', +# which doesn't need quoting, but just confirms that de-quoting +# is working. +quoted='"one.git\057objects"' +unquoted='two.git/objects' +test_expect_success 'mix of quoted and unquoted alternates' ' + check_obj "$quoted:$unquoted" <<-EOF + $one blob + $two blob +' + +test_expect_success !MINGW 'broken quoting falls back to interpreting raw' ' + mv one.git \"one.git && + check_obj \"one.git/objects <<-EOF + $one blob + EOF +' + +test_done diff --git a/t/t5700-clone-reference.sh b/t/t5700-clone-reference.sh deleted file mode 100755 index 3e783fc450..0000000000 --- a/t/t5700-clone-reference.sh +++ /dev/null @@ -1,218 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2006 Martin Waitz <tali@admingilde.org> -# - -test_description='test clone --reference' -. ./test-lib.sh - -base_dir=`pwd` - -U=$base_dir/UPLOAD_LOG - -test_expect_success 'preparing first repository' \ -'test_create_repo A && cd A && -echo first > file1 && -git add file1 && -git commit -m initial' - -cd "$base_dir" - -test_expect_success 'preparing second repository' \ -'git clone A B && cd B && -echo second > file2 && -git add file2 && -git commit -m addition && -git repack -a -d && -git prune' - -cd "$base_dir" - -test_expect_success 'cloning with reference (-l -s)' \ -'git clone -l -s --reference B A C' - -cd "$base_dir" - -test_expect_success 'existence of info/alternates' \ -'test_line_count = 2 C/.git/objects/info/alternates' - -cd "$base_dir" - -test_expect_success 'pulling from reference' \ -'cd C && -git pull ../B master' - -cd "$base_dir" - -test_expect_success 'that reference gets used' \ -'cd C && -echo "0 objects, 0 kilobytes" > expected && -git count-objects > current && -test_cmp expected current' - -cd "$base_dir" - -rm -f "$U.D" - -test_expect_success 'cloning with reference (no -l -s)' ' - GIT_TRACE_PACKET=$U.D git clone --reference B "file://$(pwd)/A" D -' - -test_expect_success 'fetched no objects' ' - test -s "$U.D" && - ! grep " want" "$U.D" -' - -cd "$base_dir" - -test_expect_success 'existence of info/alternates' \ -'test_line_count = 1 D/.git/objects/info/alternates' - -cd "$base_dir" - -test_expect_success 'pulling from reference' \ -'cd D && git pull ../B master' - -cd "$base_dir" - -test_expect_success 'that reference gets used' \ -'cd D && echo "0 objects, 0 kilobytes" > expected && -git count-objects > current && -test_cmp expected current' - -cd "$base_dir" - -test_expect_success 'updating origin' \ -'cd A && -echo third > file3 && -git add file3 && -git commit -m update && -git repack -a -d && -git prune' - -cd "$base_dir" - -test_expect_success 'pulling changes from origin' \ -'cd C && -git pull origin' - -cd "$base_dir" - -# the 2 local objects are commit and tree from the merge -test_expect_success 'that alternate to origin gets used' \ -'cd C && -echo "2 objects" > expected && -git count-objects | cut -d, -f1 > current && -test_cmp expected current' - -cd "$base_dir" - -test_expect_success 'pulling changes from origin' \ -'cd D && -git pull origin' - -cd "$base_dir" - -# the 5 local objects are expected; file3 blob, commit in A to add it -# and its tree, and 2 are our tree and the merge commit. -test_expect_success 'check objects expected to exist locally' \ -'cd D && -echo "5 objects" > expected && -git count-objects | cut -d, -f1 > current && -test_cmp expected current' - -cd "$base_dir" - -test_expect_success 'preparing alternate repository #1' \ -'test_create_repo F && cd F && -echo first > file1 && -git add file1 && -git commit -m initial' - -cd "$base_dir" - -test_expect_success 'cloning alternate repo #2 and adding changes to repo #1' \ -'git clone F G && cd F && -echo second > file2 && -git add file2 && -git commit -m addition' - -cd "$base_dir" - -test_expect_success 'cloning alternate repo #1, using #2 as reference' \ -'git clone --reference G F H' - -cd "$base_dir" - -test_expect_success 'cloning with reference being subset of source (-l -s)' \ -'git clone -l -s --reference A B E' - -cd "$base_dir" - -test_expect_success 'clone with reference from a tagged repository' ' - ( - cd A && git tag -a -m 'tagged' HEAD - ) && - git clone --reference=A A I -' - -test_expect_success 'prepare branched repository' ' - git clone A J && - ( - cd J && - git checkout -b other master^ && - echo other >otherfile && - git add otherfile && - git commit -m other && - git checkout master - ) -' - -rm -f "$U.K" - -test_expect_success 'fetch with incomplete alternates' ' - git init K && - echo "$base_dir/A/.git/objects" >K/.git/objects/info/alternates && - ( - cd K && - git remote add J "file://$base_dir/J" && - GIT_TRACE_PACKET=$U.K git fetch J - ) && - master_object=$(cd A && git for-each-ref --format="%(objectname)" refs/heads/master) && - test -s "$U.K" && - ! grep " want $master_object" "$U.K" && - tag_object=$(cd A && git for-each-ref --format="%(objectname)" refs/tags/HEAD) && - ! grep " want $tag_object" "$U.K" -' - -test_expect_success 'clone using repo with gitfile as a reference' ' - git clone --separate-git-dir=L A M && - git clone --reference=M A N && - echo "$base_dir/L/objects" >expected && - test_cmp expected "$base_dir/N/.git/objects/info/alternates" -' - -test_expect_success 'clone using repo pointed at by gitfile as reference' ' - git clone --reference=M/.git A O && - echo "$base_dir/L/objects" >expected && - test_cmp expected "$base_dir/O/.git/objects/info/alternates" -' - -test_expect_success 'clone and dissociate from reference' ' - git init P && - ( - cd P && test_commit one - ) && - git clone P Q && - ( - cd Q && test_commit two - ) && - git clone --no-local --reference=P Q R && - git clone --no-local --reference=P --dissociate Q S && - # removing the reference P would corrupt R but not S - rm -fr P && - test_must_fail git -C R fsck && - git -C S fsck -' - -test_done diff --git a/t/t5710-info-alternate.sh b/t/t5710-info-alternate.sh deleted file mode 100755 index 5a6e49d18d..0000000000 --- a/t/t5710-info-alternate.sh +++ /dev/null @@ -1,112 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2006 Martin Waitz <tali@admingilde.org> -# - -test_description='test transitive info/alternate entries' -. ./test-lib.sh - -# test that a file is not reachable in the current repository -# but that it is after creating a info/alternate entry -reachable_via() { - alternate="$1" - file="$2" - if git cat-file -e "HEAD:$file"; then return 1; fi - echo "$alternate" >> .git/objects/info/alternate - git cat-file -e "HEAD:$file" -} - -test_valid_repo() { - git fsck --full > fsck.log && - test_line_count = 0 fsck.log -} - -base_dir=`pwd` - -test_expect_success 'preparing first repository' \ -'test_create_repo A && cd A && -echo "Hello World" > file1 && -git add file1 && -git commit -m "Initial commit" file1 && -git repack -a -d && -git prune' - -cd "$base_dir" - -test_expect_success 'preparing second repository' \ -'git clone -l -s A B && cd B && -echo "foo bar" > file2 && -git add file2 && -git commit -m "next commit" file2 && -git repack -a -d -l && -git prune' - -cd "$base_dir" - -test_expect_success 'preparing third repository' \ -'git clone -l -s B C && cd C && -echo "Goodbye, cruel world" > file3 && -git add file3 && -git commit -m "one more" file3 && -git repack -a -d -l && -git prune' - -cd "$base_dir" - -test_expect_success 'creating too deep nesting' \ -'git clone -l -s C D && -git clone -l -s D E && -git clone -l -s E F && -git clone -l -s F G && -git clone --bare -l -s G H' - -test_expect_success 'invalidity of deepest repository' \ -'cd H && { - test_valid_repo - test $? -ne 0 -}' - -cd "$base_dir" - -test_expect_success 'validity of third repository' \ -'cd C && -test_valid_repo' - -cd "$base_dir" - -test_expect_success 'validity of fourth repository' \ -'cd D && -test_valid_repo' - -cd "$base_dir" - -test_expect_success 'breaking of loops' \ -'echo "$base_dir"/B/.git/objects >> "$base_dir"/A/.git/objects/info/alternates&& -cd C && -test_valid_repo' - -cd "$base_dir" - -test_expect_success 'that info/alternates is necessary' \ -'cd C && -rm -f .git/objects/info/alternates && -! (test_valid_repo)' - -cd "$base_dir" - -test_expect_success 'that relative alternate is possible for current dir' \ -'cd C && -echo "../../../B/.git/objects" > .git/objects/info/alternates && -test_valid_repo' - -cd "$base_dir" - -test_expect_success \ - 'that relative alternate is only possible for current dir' ' - cd D && - ! (test_valid_repo) -' - -cd "$base_dir" - -test_done diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh index c9d3ed14c3..362b1581e0 100755 --- a/t/t5801-remote-helpers.sh +++ b/t/t5801-remote-helpers.sh @@ -242,13 +242,6 @@ clean_mark () { sort >$(basename "$1") } -cmp_marks () { - test_when_finished "rm -rf git.marks testgit.marks" && - clean_mark ".git/testgit/$1/git.marks" && - clean_mark ".git/testgit/$1/testgit.marks" && - test_cmp git.marks testgit.marks -} - test_expect_success 'proper failure checks for fetching' ' (cd local && test_must_fail env GIT_REMOTE_TESTGIT_FAILURE=1 git fetch 2>error && @@ -258,12 +251,15 @@ test_expect_success 'proper failure checks for fetching' ' ' test_expect_success 'proper failure checks for pushing' ' + test_when_finished "rm -rf local/git.marks local/testgit.marks" && (cd local && git checkout -b crash master && echo crash >>file && git commit -a -m crash && test_must_fail env GIT_REMOTE_TESTGIT_FAILURE=1 git push --all && - cmp_marks origin + clean_mark ".git/testgit/origin/git.marks" && + clean_mark ".git/testgit/origin/testgit.marks" && + test_cmp git.marks testgit.marks ) ' diff --git a/t/t5802-connect-helper.sh b/t/t5802-connect-helper.sh index 878faf2b63..c6c2661878 100755 --- a/t/t5802-connect-helper.sh +++ b/t/t5802-connect-helper.sh @@ -4,6 +4,7 @@ test_description='ext::cmd remote "connect" helper' . ./test-lib.sh test_expect_success setup ' + git config --global protocol.ext.allow user && test_tick && git commit --allow-empty -m initial && test_tick && @@ -69,4 +70,32 @@ test_expect_success 'update backfilled tag without primary transfer' ' test_cmp expect actual ' + +test_expect_success 'set up fake git-daemon' ' + mkdir remote && + git init --bare remote/one.git && + mkdir remote/host && + git init --bare remote/host/two.git && + write_script fake-daemon <<-\EOF && + git daemon --inetd \ + --informative-errors \ + --export-all \ + --base-path="$TRASH_DIRECTORY/remote" \ + --interpolated-path="$TRASH_DIRECTORY/remote/%H%D" \ + "$TRASH_DIRECTORY/remote" + EOF + export TRASH_DIRECTORY && + PATH=$TRASH_DIRECTORY:$PATH +' + +test_expect_success 'ext command can connect to git daemon (no vhost)' ' + rm -rf dst && + git clone "ext::fake-daemon %G/one.git" dst +' + +test_expect_success 'ext command can connect to git daemon (vhost)' ' + rm -rf dst && + git clone "ext::fake-daemon %G/two.git %Vhost" dst +' + test_done diff --git a/t/t5810-proto-disable-local.sh b/t/t5810-proto-disable-local.sh new file mode 100755 index 0000000000..563592d8a8 --- /dev/null +++ b/t/t5810-proto-disable-local.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +test_description='test disabling of local paths in clone/fetch' +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-proto-disable.sh" + +test_expect_success 'setup repository to clone' ' + test_commit one +' + +test_proto "file://" file "file://$PWD" +test_proto "path" file . + +test_done diff --git a/t/t5811-proto-disable-git.sh b/t/t5811-proto-disable-git.sh new file mode 100755 index 0000000000..8ac6b2a1d0 --- /dev/null +++ b/t/t5811-proto-disable-git.sh @@ -0,0 +1,20 @@ +#!/bin/sh + +test_description='test disabling of git-over-tcp in clone/fetch' +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-proto-disable.sh" +. "$TEST_DIRECTORY/lib-git-daemon.sh" +start_git_daemon + +test_expect_success 'create git-accessible repo' ' + bare="$GIT_DAEMON_DOCUMENT_ROOT_PATH/repo.git" && + test_commit one && + git --bare init "$bare" && + git push "$bare" HEAD && + >"$bare/git-daemon-export-ok" && + git -C "$bare" config daemon.receivepack true +' + +test_proto "git://" git "$GIT_DAEMON_URL/repo.git" + +test_done diff --git a/t/t5812-proto-disable-http.sh b/t/t5812-proto-disable-http.sh new file mode 100755 index 0000000000..d911afd24c --- /dev/null +++ b/t/t5812-proto-disable-http.sh @@ -0,0 +1,41 @@ +#!/bin/sh + +test_description='test disabling of git-over-http in clone/fetch' +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-proto-disable.sh" +. "$TEST_DIRECTORY/lib-httpd.sh" +start_httpd + +test_expect_success 'create git-accessible repo' ' + bare="$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + test_commit one && + git --bare init "$bare" && + git push "$bare" HEAD && + git -C "$bare" config http.receivepack true +' + +test_proto "smart http" http "$HTTPD_URL/smart/repo.git" + +test_expect_success 'curl redirects respect whitelist' ' + test_must_fail env GIT_ALLOW_PROTOCOL=http:https \ + GIT_SMART_HTTP=0 \ + git clone "$HTTPD_URL/ftp-redir/repo.git" 2>stderr && + { + test_i18ngrep "ftp.*disabled" stderr || + test_i18ngrep "your curl version is too old" + } +' + +test_expect_success 'curl limits redirects' ' + test_must_fail git clone "$HTTPD_URL/loop-redir/smart/repo.git" +' + +test_expect_success 'http can be limited to from-user' ' + git -c protocol.http.allow=user \ + clone "$HTTPD_URL/smart/repo.git" plain.git && + test_must_fail git -c protocol.http.allow=user \ + clone "$HTTPD_URL/smart-redir-perm/repo.git" redir.git +' + +stop_httpd +test_done diff --git a/t/t5813-proto-disable-ssh.sh b/t/t5813-proto-disable-ssh.sh new file mode 100755 index 0000000000..a954ead8af --- /dev/null +++ b/t/t5813-proto-disable-ssh.sh @@ -0,0 +1,20 @@ +#!/bin/sh + +test_description='test disabling of git-over-ssh in clone/fetch' +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-proto-disable.sh" + +setup_ssh_wrapper + +test_expect_success 'setup repository to clone' ' + test_commit one && + mkdir remote && + git init --bare remote/repo.git && + git push remote/repo.git HEAD +' + +test_proto "host:path" ssh "remote:repo.git" +test_proto "ssh://" ssh "ssh://remote$PWD/remote/repo.git" +test_proto "git+ssh://" ssh "git+ssh://remote$PWD/remote/repo.git" + +test_done diff --git a/t/t5814-proto-disable-ext.sh b/t/t5814-proto-disable-ext.sh new file mode 100755 index 0000000000..9d6f7dfa2c --- /dev/null +++ b/t/t5814-proto-disable-ext.sh @@ -0,0 +1,18 @@ +#!/bin/sh + +test_description='test disabling of remote-helper paths in clone/fetch' +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-proto-disable.sh" + +setup_ext_wrapper + +test_expect_success 'setup repository to clone' ' + test_commit one && + mkdir remote && + git init --bare remote/repo.git && + git push remote/repo.git HEAD +' + +test_proto "remote-helper" ext "ext::fake-remote %S repo.git" + +test_done diff --git a/t/t5815-submodule-protos.sh b/t/t5815-submodule-protos.sh new file mode 100755 index 0000000000..06f55a1b8a --- /dev/null +++ b/t/t5815-submodule-protos.sh @@ -0,0 +1,43 @@ +#!/bin/sh + +test_description='test protocol whitelisting with submodules' +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-proto-disable.sh + +setup_ext_wrapper +setup_ssh_wrapper + +test_expect_success 'setup repository with submodules' ' + mkdir remote && + git init remote/repo.git && + (cd remote/repo.git && test_commit one) && + # submodule-add should probably trust what we feed it on the cmdline, + # but its implementation is overly conservative. + GIT_ALLOW_PROTOCOL=ssh git submodule add remote:repo.git ssh-module && + GIT_ALLOW_PROTOCOL=ext git submodule add "ext::fake-remote %S repo.git" ext-module && + git commit -m "add submodules" +' + +test_expect_success 'clone with recurse-submodules fails' ' + test_must_fail git clone --recurse-submodules . dst +' + +test_expect_success 'setup individual updates' ' + rm -rf dst && + git clone . dst && + git -C dst submodule init +' + +test_expect_success 'update of ssh allowed' ' + git -C dst submodule update ssh-module +' + +test_expect_success 'update of ext not allowed' ' + test_must_fail git -C dst submodule update ext-module +' + +test_expect_success 'user can override whitelist' ' + GIT_ALLOW_PROTOCOL=ext git -C dst submodule update ext-module +' + +test_done diff --git a/t/t5900-repo-selection.sh b/t/t5900-repo-selection.sh index 3d5b418bb4..14e59c5b3e 100755 --- a/t/t5900-repo-selection.sh +++ b/t/t5900-repo-selection.sh @@ -15,7 +15,7 @@ make_tree() { make_bare() { git init --bare "$1" && (cd "$1" && - tree=`git hash-object -w -t tree /dev/null` && + tree=$(git hash-object -w -t tree /dev/null) && commit=$(echo "$1" | git commit-tree $tree) && git update-ref HEAD $commit ) diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh index 3e752ce032..969e4e9e52 100755 --- a/t/t6000-rev-list-misc.sh +++ b/t/t6000-rev-list-misc.sh @@ -100,4 +100,18 @@ test_expect_success '--bisect and --first-parent can not be combined' ' test_must_fail git rev-list --bisect --first-parent HEAD ' +test_expect_success '--header shows a NUL after each commit' ' + # We know that there is no Q in the true payload; names and + # addresses of the authors and the committers do not have + # any, and object names or header names do not, either. + git rev-list --header --max-count=2 HEAD | + nul_to_q | + grep "^Q" >actual && + cat >expect <<-EOF && + Q$(git rev-parse HEAD~1) + Q + EOF + test_cmp expect actual +' + test_done diff --git a/t/t6001-rev-list-graft.sh b/t/t6001-rev-list-graft.sh index 8efcd13079..05ddc69cf2 100755 --- a/t/t6001-rev-list-graft.sh +++ b/t/t6001-rev-list-graft.sh @@ -10,15 +10,15 @@ test_expect_success setup ' echo >subdir/fileB fileB && git add fileA subdir/fileB && git commit -a -m "Initial in one history." && - A0=`git rev-parse --verify HEAD` && + A0=$(git rev-parse --verify HEAD) && echo >fileA fileA modified && git commit -a -m "Second in one history." && - A1=`git rev-parse --verify HEAD` && + A1=$(git rev-parse --verify HEAD) && echo >subdir/fileB fileB modified && git commit -a -m "Third in one history." && - A2=`git rev-parse --verify HEAD` && + A2=$(git rev-parse --verify HEAD) && rm -f .git/refs/heads/master .git/index && @@ -26,15 +26,15 @@ test_expect_success setup ' echo >subdir/fileB fileB again && git add fileA subdir/fileB && git commit -a -m "Initial in alternate history." && - B0=`git rev-parse --verify HEAD` && + B0=$(git rev-parse --verify HEAD) && echo >fileA fileA modified in alternate history && git commit -a -m "Second in alternate history." && - B1=`git rev-parse --verify HEAD` && + B1=$(git rev-parse --verify HEAD) && echo >subdir/fileB fileB modified in alternate history && git commit -a -m "Third in alternate history." && - B2=`git rev-parse --verify HEAD` && + B2=$(git rev-parse --verify HEAD) && : done ' diff --git a/t/t6002-rev-list-bisect.sh b/t/t6002-rev-list-bisect.sh index 43ad772484..3bf2759eae 100755 --- a/t/t6002-rev-list-bisect.sh +++ b/t/t6002-rev-list-bisect.sh @@ -27,9 +27,9 @@ test_bisection_diff() # Test if bisection size is close to half of list size within # tolerance. # - _bisect_err=`expr $_list_size - $_bisection_size \* 2` - test "$_bisect_err" -lt 0 && _bisect_err=`expr 0 - $_bisect_err` - _bisect_err=`expr $_bisect_err / 2` ; # floor + _bisect_err=$(expr $_list_size - $_bisection_size \* 2) + test "$_bisect_err" -lt 0 && _bisect_err=$(expr 0 - $_bisect_err) + _bisect_err=$(expr $_bisect_err / 2) ; # floor test_expect_success \ "bisection diff $_bisect_option $_head $* <= $_max_diff" \ diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index b77d4c97c1..a1dcdb81d7 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -184,38 +184,38 @@ commit $head1 [1;31;43mfoo[m EOF -test_expect_success '%C(auto) does not enable color by default' ' +test_expect_success '%C(auto,...) does not enable color by default' ' git log --format=$AUTO_COLOR -1 >actual && has_no_color actual ' -test_expect_success '%C(auto) enables colors for color.diff' ' +test_expect_success '%C(auto,...) enables colors for color.diff' ' git -c color.diff=always log --format=$AUTO_COLOR -1 >actual && has_color actual ' -test_expect_success '%C(auto) enables colors for color.ui' ' +test_expect_success '%C(auto,...) enables colors for color.ui' ' git -c color.ui=always log --format=$AUTO_COLOR -1 >actual && has_color actual ' -test_expect_success '%C(auto) respects --color' ' +test_expect_success '%C(auto,...) respects --color' ' git log --format=$AUTO_COLOR -1 --color >actual && has_color actual ' -test_expect_success '%C(auto) respects --no-color' ' +test_expect_success '%C(auto,...) respects --no-color' ' git -c color.ui=always log --format=$AUTO_COLOR -1 --no-color >actual && has_no_color actual ' -test_expect_success TTY '%C(auto) respects --color=auto (stdout is tty)' ' +test_expect_success TTY '%C(auto,...) respects --color=auto (stdout is tty)' ' test_terminal env TERM=vt100 \ git log --format=$AUTO_COLOR -1 --color=auto >actual && has_color actual ' -test_expect_success '%C(auto) respects --color=auto (stdout not tty)' ' +test_expect_success '%C(auto,...) respects --color=auto (stdout not tty)' ' ( TERM=vt100 && export TERM && git log --format=$AUTO_COLOR -1 --color=auto >actual && @@ -223,6 +223,18 @@ test_expect_success '%C(auto) respects --color=auto (stdout not tty)' ' ) ' +test_expect_success '%C(auto) respects --color' ' + git log --color --format="%C(auto)%H" -1 >actual && + printf "\\033[33m%s\\033[m\\n" $(git rev-parse HEAD) >expect && + test_cmp expect actual +' + +test_expect_success '%C(auto) respects --no-color' ' + git log --no-color --format="%C(auto)%H" -1 >actual && + git rev-parse HEAD >expect && + test_cmp expect actual +' + iconv -f utf-8 -t $test_encoding > commit-msg <<EOF Test printing of complex bodies diff --git a/t/t6007-rev-list-cherry-pick-file.sh b/t/t6007-rev-list-cherry-pick-file.sh index 28d4f6b259..1408b608eb 100755 --- a/t/t6007-rev-list-cherry-pick-file.sh +++ b/t/t6007-rev-list-cherry-pick-file.sh @@ -207,4 +207,25 @@ test_expect_success '--count --left-right' ' test_cmp expect actual ' +# Corrupt the object store deliberately to make sure +# the object is not even checked for its existence. +remove_loose_object () { + sha1="$(git rev-parse "$1")" && + remainder=${sha1#??} && + firsttwo=${sha1%$remainder} && + rm .git/objects/$firsttwo/$remainder +} + +test_expect_success '--cherry-pick avoids looking at full diffs' ' + git checkout -b shy-diff && + test_commit dont-look-at-me && + echo Hello >dont-look-at-me.t && + test_tick && + git commit -m tip dont-look-at-me.t && + git checkout -b mainline HEAD^ && + test_commit to-cherry-pick && + remove_loose_object shy-diff^:dont-look-at-me.t && + git rev-list --cherry-pick ...shy-diff +' + test_done diff --git a/t/t6009-rev-list-parent.sh b/t/t6009-rev-list-parent.sh index 66cda17ef3..20e3e2554a 100755 --- a/t/t6009-rev-list-parent.sh +++ b/t/t6009-rev-list-parent.sh @@ -47,7 +47,9 @@ test_expect_success 'setup roots, merges and octopuses' ' git checkout -b yetanotherbranch four && test_commit eight && git checkout master && - test_merge normalmerge newroot && + test_tick && + git merge --allow-unrelated-histories -m normalmerge newroot && + git tag normalmerge && test_tick && git merge -m tripus sidebranch anotherbranch && git tag tripus && diff --git a/t/t6010-merge-base.sh b/t/t6010-merge-base.sh index 39b3238da2..31db7b5f91 100755 --- a/t/t6010-merge-base.sh +++ b/t/t6010-merge-base.sh @@ -215,11 +215,13 @@ test_expect_success 'criss-cross merge-base for octopus-step' ' git reset --hard E && test_commit CC2 && test_tick && - git merge -s ours CC1 && + # E is a root commit unrelated to MMR root on which CC1 is based + git merge -s ours --allow-unrelated-histories CC1 && test_commit CC-o && test_commit CCB && git reset --hard CC1 && - git merge -s ours CC2 && + # E is a root commit unrelated to MMR root on which CC1 is based + git merge -s ours --allow-unrelated-histories CC2 && test_commit CCA && git rev-parse CC1 CC2 >expected && @@ -258,6 +260,12 @@ test_expect_success 'using reflog to find the fork point' ' test_cmp expect3 actual ' +test_expect_success '--fork-point works with empty reflog' ' + git -c core.logallrefupdates=false branch no-reflog base && + git merge-base --fork-point no-reflog derived && + test_cmp expect3 actual +' + test_expect_success 'merge-base --octopus --all for complex tree' ' # Best common ancestor for JE, JAA and JDD is JC # JE diff --git a/t/t6012-rev-list-simplify.sh b/t/t6012-rev-list-simplify.sh index b89cd6b07a..2a0fbb87b1 100755 --- a/t/t6012-rev-list-simplify.sh +++ b/t/t6012-rev-list-simplify.sh @@ -71,7 +71,7 @@ test_expect_success setup ' note J && git checkout master && - test_tick && git merge -m "Coolest" unrelated && + test_tick && git merge --allow-unrelated-histories -m "Coolest" unrelated && note K && echo "Immaterial" >elif && diff --git a/t/t6015-rev-list-show-all-parents.sh b/t/t6015-rev-list-show-all-parents.sh index 8b146fb432..3c73c93ba6 100755 --- a/t/t6015-rev-list-show-all-parents.sh +++ b/t/t6015-rev-list-show-all-parents.sh @@ -6,11 +6,11 @@ test_description='--show-all --parents does not rewrite TREESAME commits' test_expect_success 'set up --show-all --parents test' ' test_commit one foo.txt && - commit1=`git rev-list -1 HEAD` && + commit1=$(git rev-list -1 HEAD) && test_commit two bar.txt && - commit2=`git rev-list -1 HEAD` && + commit2=$(git rev-list -1 HEAD) && test_commit three foo.txt && - commit3=`git rev-list -1 HEAD` + commit3=$(git rev-list -1 HEAD) ' test_expect_success '--parents rewrites TREESAME parents correctly' ' diff --git a/t/t6018-rev-list-glob.sh b/t/t6018-rev-list-glob.sh index d00f7db868..381f35ed16 100755 --- a/t/t6018-rev-list-glob.sh +++ b/t/t6018-rev-list-glob.sh @@ -257,7 +257,7 @@ test_expect_success 'rev-list accumulates multiple --exclude' ' # "git rev-list<ENTER>" is likely to be a bug in the calling script and may -# deserve an error message, but do cases where set of refs programatically +# deserve an error message, but do cases where set of refs programmatically # given using globbing and/or --stdin need to fail with the same error, or # are we better off reporting a success with no output? The following few # tests document the current behaviour to remind us that we might want to diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index 190ee903cf..20aee43f95 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -346,4 +346,17 @@ test_expect_success 'conflict at EOF without LF resolved by --union' \ printf "line1\nline2\nline3x\nline3y" >expect.txt && test_cmp expect.txt output.txt' +test_expect_success 'conflict sections match existing line endings' ' + printf "1\\r\\n2\\r\\n3" >crlf-orig.txt && + printf "1\\r\\n2\\r\\n4" >crlf-diff1.txt && + printf "1\\r\\n2\\r\\n5" >crlf-diff2.txt && + test_must_fail git -c core.eol=crlf merge-file -p \ + crlf-diff1.txt crlf-orig.txt crlf-diff2.txt >crlf.txt && + test $(tr "\015" Q <crlf.txt | grep "^[<=>].*Q$" | wc -l) = 3 && + test $(tr "\015" Q <crlf.txt | grep "[345]Q$" | wc -l) = 3 && + test_must_fail git -c core.eol=crlf merge-file -p \ + nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >nolf.txt && + test $(tr "\015" Q <nolf.txt | grep "^[<=>].*Q$" | wc -l) = 0 +' + test_done diff --git a/t/t6024-recursive-merge.sh b/t/t6024-recursive-merge.sh index 755d30ce2a..3f59e58dfb 100755 --- a/t/t6024-recursive-merge.sh +++ b/t/t6024-recursive-merge.sh @@ -76,7 +76,7 @@ test_expect_success "result contains a conflict" "test_cmp expect a1" git ls-files --stage > out cat > expect << EOF -100644 439cc46de773d8a83c77799b7cc9191c128bfcff 1 a1 +100644 ec3fe2a791706733f2d8fa7ad45d9a9672031f5e 1 a1 100644 cf84443e49e1b366fac938711ddf4be2d4d1d9e9 2 a1 100644 fd7923529855d0b274795ae3349c5e0438333979 3 a1 EOF diff --git a/t/t6026-merge-attr.sh b/t/t6026-merge-attr.sh index 3c21938a68..8f9b48a493 100755 --- a/t/t6026-merge-attr.sh +++ b/t/t6026-merge-attr.sh @@ -85,11 +85,12 @@ test_expect_success 'retry the merge with longer context' ' cat >./custom-merge <<\EOF #!/bin/sh -orig="$1" ours="$2" theirs="$3" exit="$4" +orig="$1" ours="$2" theirs="$3" exit="$4" path=$5 ( echo "orig is $orig" echo "ours is $ours" echo "theirs is $theirs" + echo "path is $path" echo "=== orig ===" cat "$orig" echo "=== ours ===" @@ -110,7 +111,7 @@ test_expect_success 'custom merge backend' ' git reset --hard anchor && git config --replace-all \ - merge.custom.driver "./custom-merge %O %A %B 0" && + merge.custom.driver "./custom-merge %O %A %B 0 %P" && git config --replace-all \ merge.custom.name "custom merge driver for testing" && @@ -121,7 +122,7 @@ test_expect_success 'custom merge backend' ' o=$(git unpack-file master^:text) && a=$(git unpack-file side^:text) && b=$(git unpack-file master:text) && - sh -c "./custom-merge $o $a $b 0" && + sh -c "./custom-merge $o $a $b 0 'text'" && sed -e 1,3d $a >check-2 && cmp check-1 check-2 && rm -f $o $a $b @@ -131,7 +132,7 @@ test_expect_success 'custom merge backend' ' git reset --hard anchor && git config --replace-all \ - merge.custom.driver "./custom-merge %O %A %B 1" && + merge.custom.driver "./custom-merge %O %A %B 1 %P" && git config --replace-all \ merge.custom.name "custom merge driver for testing" && @@ -148,9 +149,12 @@ test_expect_success 'custom merge backend' ' o=$(git unpack-file master^:text) && a=$(git unpack-file anchor:text) && b=$(git unpack-file master:text) && - sh -c "./custom-merge $o $a $b 0" && + sh -c "./custom-merge $o $a $b 0 'text'" && sed -e 1,3d $a >check-2 && cmp check-1 check-2 && + sed -e 1,3d -e 4q $a >check-3 && + echo "path is text" >expect && + cmp expect check-3 && rm -f $o $a $b ' @@ -172,8 +176,32 @@ test_expect_success 'up-to-date merge without common ancestor' ' test_tick && ( cd repo1 && - git pull ../repo2 master + git fetch ../repo2 master && + git merge --allow-unrelated-histories FETCH_HEAD ) ' +test_expect_success 'custom merge does not lock index' ' + git reset --hard anchor && + write_script sleep-an-hour.sh <<-\EOF && + sleep 3600 & + echo $! >sleep.pid + EOF + + test_write_lines >.gitattributes \ + "* merge=ours" "text merge=sleep-an-hour" && + test_config merge.ours.driver true && + test_config merge.sleep-an-hour.driver ./sleep-an-hour.sh && + + # We are testing that the custom merge driver does not block + # index.lock on Windows due to an inherited file handle. + # To ensure that the backgrounded process ran sufficiently + # long (and has been started in the first place), we do not + # ignore the result of the kill command. + # By packaging the command in test_when_finished, we get both + # the correctness check and the clean-up. + test_when_finished "kill \$(cat sleep.pid)" && + git merge master +' + test_done diff --git a/t/t6029-merge-subtree.sh b/t/t6029-merge-subtree.sh index 73fc240e85..3e692454a7 100755 --- a/t/t6029-merge-subtree.sh +++ b/t/t6029-merge-subtree.sh @@ -49,7 +49,7 @@ test_expect_success 'setup' ' test_expect_success 'initial merge' ' git remote add -f gui ../git-gui && - git merge -s ours --no-commit gui/master && + git merge -s ours --no-commit --allow-unrelated-histories gui/master && git read-tree --prefix=git-gui/ -u gui/master && git commit -m "Merge git-gui as our subdirectory" && git checkout -b work && diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index e74662ba5c..8c2c6eaef8 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -362,7 +362,7 @@ test_expect_success 'bisect starting with a detached HEAD' ' test_expect_success 'bisect errors out if bad and good are mistaken' ' git bisect reset && test_must_fail git bisect start $HASH2 $HASH4 2> rev_list_error && - grep "mistook good and bad" rev_list_error && + test_i18ngrep "mistook good and bad" rev_list_error && git bisect reset ' @@ -404,16 +404,16 @@ test_expect_success 'side branch creation' ' test_expect_success 'good merge base when good and bad are siblings' ' git bisect start "$HASH7" "$SIDE_HASH7" > my_bisect_log.txt && - grep "merge base must be tested" my_bisect_log.txt && + test_i18ngrep "merge base must be tested" my_bisect_log.txt && grep $HASH4 my_bisect_log.txt && git bisect good > my_bisect_log.txt && - test_must_fail grep "merge base must be tested" my_bisect_log.txt && + ! grep "merge base must be tested" my_bisect_log.txt && grep $HASH6 my_bisect_log.txt && git bisect reset ' test_expect_success 'skipped merge base when good and bad are siblings' ' git bisect start "$SIDE_HASH7" "$HASH7" > my_bisect_log.txt && - grep "merge base must be tested" my_bisect_log.txt && + test_i18ngrep "merge base must be tested" my_bisect_log.txt && grep $HASH4 my_bisect_log.txt && git bisect skip > my_bisect_log.txt 2>&1 && grep "warning" my_bisect_log.txt && @@ -423,11 +423,11 @@ test_expect_success 'skipped merge base when good and bad are siblings' ' test_expect_success 'bad merge base when good and bad are siblings' ' git bisect start "$HASH7" HEAD > my_bisect_log.txt && - grep "merge base must be tested" my_bisect_log.txt && + test_i18ngrep "merge base must be tested" my_bisect_log.txt && grep $HASH4 my_bisect_log.txt && test_must_fail git bisect bad > my_bisect_log.txt 2>&1 && - grep "merge base $HASH4 is bad" my_bisect_log.txt && - grep "fixed between $HASH4 and \[$SIDE_HASH7\]" my_bisect_log.txt && + test_i18ngrep "merge base $HASH4 is bad" my_bisect_log.txt && + test_i18ngrep "fixed between $HASH4 and \[$SIDE_HASH7\]" my_bisect_log.txt && git bisect reset ' @@ -460,9 +460,9 @@ test_expect_success 'many merge bases creation' ' test_expect_success 'good merge bases when good and bad are siblings' ' git bisect start "$B_HASH" "$A_HASH" > my_bisect_log.txt && - grep "merge base must be tested" my_bisect_log.txt && + test_i18ngrep "merge base must be tested" my_bisect_log.txt && git bisect good > my_bisect_log2.txt && - grep "merge base must be tested" my_bisect_log2.txt && + test_i18ngrep "merge base must be tested" my_bisect_log2.txt && { { grep "$SIDE_HASH5" my_bisect_log.txt && @@ -477,14 +477,14 @@ test_expect_success 'good merge bases when good and bad are siblings' ' test_expect_success 'optimized merge base checks' ' git bisect start "$HASH7" "$SIDE_HASH7" > my_bisect_log.txt && - grep "merge base must be tested" my_bisect_log.txt && + test_i18ngrep "merge base must be tested" my_bisect_log.txt && grep "$HASH4" my_bisect_log.txt && git bisect good > my_bisect_log2.txt && test -f ".git/BISECT_ANCESTORS_OK" && test "$HASH6" = $(git rev-parse --verify HEAD) && git bisect bad > my_bisect_log3.txt && git bisect good "$A_HASH" > my_bisect_log4.txt && - grep "merge base must be tested" my_bisect_log4.txt && + test_i18ngrep "merge base must be tested" my_bisect_log4.txt && test_must_fail test -f ".git/BISECT_ANCESTORS_OK" ' @@ -562,7 +562,7 @@ test_expect_success 'skipping away from skipped commit' ' test_expect_success 'erroring out when using bad path parameters' ' test_must_fail git bisect start $PARA_HASH7 $HASH1 -- foobar 2> error.txt && - grep "bad path parameters" error.txt + test_i18ngrep "bad path parameters" error.txt ' test_expect_success 'test bisection on bare repo - --no-checkout specified' ' @@ -721,7 +721,7 @@ git bisect good 3de952f2416b6084f557ec417709eac740c6818c # first bad commit: [32a594a3fdac2d57cf6d02987e30eec68511498c] Add <4: Ciao for now> into <hello>. EOF -test_expect_success 'bisect log: successfull result' ' +test_expect_success 'bisect log: successful result' ' git bisect reset && git bisect start $HASH4 $HASH2 && git bisect good && @@ -803,7 +803,7 @@ test_expect_success 'bisect terms needs 0 or 1 argument' ' test_must_fail git bisect terms 1 2 && test_must_fail git bisect terms 2>actual && echo "no terms defined" >expected && - test_cmp expected actual + test_i18ncmp expected actual ' test_expect_success 'bisect terms shows good/bad after start' ' @@ -875,7 +875,7 @@ test_expect_success 'bisect start --term-* does store terms' ' Your current terms are two for the old state and one for the new state. EOF - test_cmp expected actual && + test_i18ncmp expected actual && git bisect terms --term-bad >actual && echo one >expected && test_cmp expected actual && diff --git a/t/t6031-merge-filemode.sh b/t/t6031-merge-filemode.sh new file mode 100755 index 0000000000..7d06461f13 --- /dev/null +++ b/t/t6031-merge-filemode.sh @@ -0,0 +1,100 @@ +#!/bin/sh + +test_description='merge: handle file mode' +. ./test-lib.sh + +test_expect_success 'set up mode change in one branch' ' + : >file1 && + git add file1 && + git commit -m initial && + git checkout -b a1 master && + : >dummy && + git add dummy && + git commit -m a && + git checkout -b b1 master && + test_chmod +x file1 && + git add file1 && + git commit -m b1 +' + +do_one_mode () { + strategy=$1 + us=$2 + them=$3 + test_expect_success "resolve single mode change ($strategy, $us)" ' + git checkout -f $us && + git merge -s $strategy $them && + git ls-files -s file1 | grep ^100755 + ' + + test_expect_success FILEMODE "verify executable bit on file ($strategy, $us)" ' + test -x file1 + ' +} + +do_one_mode recursive a1 b1 +do_one_mode recursive b1 a1 +do_one_mode resolve a1 b1 +do_one_mode resolve b1 a1 + +test_expect_success 'set up mode change in both branches' ' + git reset --hard HEAD && + git checkout -b a2 master && + : >file2 && + H=$(git hash-object file2) && + test_chmod +x file2 && + git commit -m a2 && + git checkout -b b2 master && + : >file2 && + git add file2 && + git commit -m b2 && + { + echo "100755 $H 2 file2" + echo "100644 $H 3 file2" + } >expect +' + +do_both_modes () { + strategy=$1 + test_expect_success "detect conflict on double mode change ($strategy)" ' + git reset --hard && + git checkout -f a2 && + test_must_fail git merge -s $strategy b2 && + git ls-files -u >actual && + test_cmp actual expect && + git ls-files -s file2 | grep ^100755 + ' + + test_expect_success FILEMODE "verify executable bit on file ($strategy)" ' + test -x file2 + ' +} + +# both sides are equivalent, so no need to run both ways +do_both_modes recursive +do_both_modes resolve + +test_expect_success 'set up delete/modechange scenario' ' + git reset --hard && + git checkout -b deletion master && + git rm file1 && + git commit -m deletion +' + +do_delete_modechange () { + strategy=$1 + us=$2 + them=$3 + test_expect_success "detect delete/modechange conflict ($strategy, $us)" ' + git reset --hard && + git checkout $us && + test_must_fail git merge -s $strategy $them + ' +} + +do_delete_modechange recursive b1 deletion +do_delete_modechange recursive deletion b1 +do_delete_modechange resolve b1 deletion +do_delete_modechange resolve deletion b1 + +test_done diff --git a/t/t6031-merge-recursive.sh b/t/t6031-merge-recursive.sh deleted file mode 100755 index 6464a16a19..0000000000 --- a/t/t6031-merge-recursive.sh +++ /dev/null @@ -1,87 +0,0 @@ -#!/bin/sh - -test_description='merge-recursive: handle file mode' -. ./test-lib.sh - -test_expect_success 'mode change in one branch: keep changed version' ' - : >file1 && - git add file1 && - git commit -m initial && - git checkout -b a1 master && - : >dummy && - git add dummy && - git commit -m a && - git checkout -b b1 master && - test_chmod +x file1 && - git add file1 && - git commit -m b1 && - git checkout a1 && - git merge-recursive master -- a1 b1 && - git ls-files -s file1 | grep ^100755 -' - -test_expect_success FILEMODE 'verify executable bit on file' ' - test -x file1 -' - -test_expect_success 'mode change in both branches: expect conflict' ' - git reset --hard HEAD && - git checkout -b a2 master && - : >file2 && - H=$(git hash-object file2) && - test_chmod +x file2 && - git commit -m a2 && - git checkout -b b2 master && - : >file2 && - git add file2 && - git commit -m b2 && - git checkout a2 && - ( - git merge-recursive master -- a2 b2 - test $? = 1 - ) && - git ls-files -u >actual && - ( - echo "100755 $H 2 file2" - echo "100644 $H 3 file2" - ) >expect && - test_cmp actual expect && - git ls-files -s file2 | grep ^100755 -' - -test_expect_success FILEMODE 'verify executable bit on file' ' - test -x file2 -' - -test_expect_success 'merging with triple rename across D/F conflict' ' - git reset --hard HEAD && - git checkout -b main && - git rm -rf . && - - echo "just a file" >sub1 && - mkdir -p sub2 && - echo content1 >sub2/file1 && - echo content2 >sub2/file2 && - echo content3 >sub2/file3 && - mkdir simple && - echo base >simple/bar && - git add -A && - test_tick && - git commit -m base && - - git checkout -b other && - echo more >>simple/bar && - test_tick && - git commit -a -m changesimplefile && - - git checkout main && - git rm sub1 && - git mv sub2 sub1 && - test_tick && - git commit -m changefiletodir && - - test_tick && - git merge other -' - -test_done diff --git a/t/t6032-merge-large-rename.sh b/t/t6032-merge-large-rename.sh index 0f79268917..80777386dc 100755 --- a/t/t6032-merge-large-rename.sh +++ b/t/t6032-merge-large-rename.sh @@ -20,7 +20,7 @@ test_expect_success 'setup (initial)' ' make_text() { echo $1: $2 - for i in `count 20`; do + for i in $(count 20); do echo $1: $i done echo $1: $3 diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index 9d6621c056..18aa88b5c0 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -212,7 +212,8 @@ test_expect_success 'git detects differently handled merges conflict' ' -L "" \ -L "Temporary merge branch 1" \ merged empty merge-me && - test $(git rev-parse :1:new_a) = $(git hash-object merged) + sed -e "s/^\([<=>]\)/\1\1\1/" merged >merged-internal && + test $(git rev-parse :1:new_a) = $(git hash-object merged-internal) ' # @@ -299,89 +300,6 @@ test_expect_success 'git detects conflict merging criss-cross+modify/delete, rev ' # -# criss-cross + modify/modify with very contrived file contents: -# -# B D -# o---o -# / \ / \ -# A o X ? F -# \ / \ / -# o---o -# C E -# -# Commit A: file with contents 'A\n' -# Commit B: file with contents 'B\n' -# Commit C: file with contents 'C\n' -# Commit D: file with contents 'D\n' -# Commit E: file with contents: -# <<<<<<< Temporary merge branch 1 -# C -# ======= -# B -# >>>>>>> Temporary merge branch 2 -# -# Now, when we merge commits D & E, does git detect the conflict? - -test_expect_success 'setup differently handled merges of content conflict' ' - git clean -fdqx && - rm -rf .git && - git init && - - echo A >file && - git add file && - test_tick && - git commit -m A && - - git branch B && - git checkout -b C && - echo C >file && - git add file && - test_tick && - git commit -m C && - - git checkout B && - echo B >file && - git add file && - test_tick && - git commit -m B && - - git checkout B^0 && - test_must_fail git merge C && - echo D >file && - git add file && - test_tick && - git commit -m D && - git tag D && - - git checkout C^0 && - test_must_fail git merge B && - cat <<EOF >file && -<<<<<<< Temporary merge branch 1 -C -======= -B ->>>>>>> Temporary merge branch 2 -EOF - git add file && - test_tick && - git commit -m E && - git tag E -' - -test_expect_failure 'git detects conflict w/ criss-cross+contrived resolution' ' - git checkout D^0 && - - test_must_fail git merge -s recursive E^0 && - - test 3 -eq $(git ls-files -s | wc -l) && - test 3 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :2:file) = $(git rev-parse D:file) && - test $(git rev-parse :3:file) = $(git rev-parse E:file) -' - -# # criss-cross + d/f conflict via add/add: # Commit A: Neither file 'a' nor directory 'a/' exists. # Commit B: Introduce 'a' diff --git a/t/t6038-merge-text-auto.sh b/t/t6038-merge-text-auto.sh index 85c10b0940..5e8d5fa50c 100755 --- a/t/t6038-merge-text-auto.sh +++ b/t/t6038-merge-text-auto.sh @@ -16,6 +16,13 @@ test_description='CRLF merge conflict across text=auto change test_have_prereq SED_STRIPS_CR && SED_OPTIONS=-b +compare_files () { + tr '\015\000' QN <"$1" >"$1".expect && + tr '\015\000' QN <"$2" >"$2".actual && + test_cmp "$1".expect "$2".actual && + rm "$1".expect "$2".actual +} + test_expect_success setup ' git config core.autocrlf false && @@ -30,7 +37,7 @@ test_expect_success setup ' git branch side && echo "* text=auto" >.gitattributes && - touch file && + echo first line >file && git add .gitattributes file && test_tick && git commit -m "normalize file" && @@ -81,38 +88,49 @@ test_expect_success 'Merge after setting text=auto' ' rm -f .gitattributes && git reset --hard a && git merge b && - test_cmp expected file + compare_files expected file ' -test_expect_success 'Merge addition of text=auto' ' +test_expect_success 'Merge addition of text=auto eol=LF' ' + git config core.eol lf && cat <<-\EOF >expected && first line same line EOF - if test_have_prereq NATIVE_CRLF; then - append_cr <expected >expected.temp && - mv expected.temp expected - fi && git config merge.renormalize true && git rm -fr . && rm -f .gitattributes && git reset --hard b && git merge a && - test_cmp expected file + compare_files expected file +' + +test_expect_success 'Merge addition of text=auto eol=CRLF' ' + git config core.eol crlf && + cat <<-\EOF >expected && + first line + same line + EOF + + append_cr <expected >expected.temp && + mv expected.temp expected && + git config merge.renormalize true && + git rm -fr . && + rm -f .gitattributes && + git reset --hard b && + echo >&2 "After git reset --hard b" && + git ls-files -s --eol >&2 && + git merge a && + compare_files expected file ' test_expect_success 'Detect CRLF/LF conflict after setting text=auto' ' + git config core.eol native && echo "<<<<<<<" >expected && - if test_have_prereq NATIVE_CRLF; then - echo first line | append_cr >>expected && - echo same line | append_cr >>expected && - echo ======= | append_cr >>expected - else - echo first line >>expected && - echo same line >>expected && - echo ======= >>expected - fi && + echo first line >>expected && + echo same line >>expected && + echo ======= >>expected && echo first line | append_cr >>expected && echo same line | append_cr >>expected && echo ">>>>>>>" >>expected && @@ -121,29 +139,23 @@ test_expect_success 'Detect CRLF/LF conflict after setting text=auto' ' git reset --hard a && test_must_fail git merge b && fuzz_conflict file >file.fuzzy && - test_cmp expected file.fuzzy + compare_files expected file.fuzzy ' test_expect_success 'Detect LF/CRLF conflict from addition of text=auto' ' echo "<<<<<<<" >expected && echo first line | append_cr >>expected && echo same line | append_cr >>expected && - if test_have_prereq NATIVE_CRLF; then - echo ======= | append_cr >>expected && - echo first line | append_cr >>expected && - echo same line | append_cr >>expected - else - echo ======= >>expected && - echo first line >>expected && - echo same line >>expected - fi && + echo ======= >>expected && + echo first line >>expected && + echo same line >>expected && echo ">>>>>>>" >>expected && git config merge.renormalize false && rm -f .gitattributes && git reset --hard b && test_must_fail git merge a && fuzz_conflict file >file.fuzzy && - test_cmp expected file.fuzzy + compare_files expected file.fuzzy ' test_expect_failure 'checkout -m after setting text=auto' ' @@ -158,7 +170,7 @@ test_expect_failure 'checkout -m after setting text=auto' ' git reset --hard initial && git checkout a -- . && git checkout -m b && - test_cmp expected file + compare_files expected file ' test_expect_failure 'checkout -m addition of text=auto' ' @@ -173,7 +185,7 @@ test_expect_failure 'checkout -m addition of text=auto' ' git reset --hard initial && git checkout b -- . && git checkout -m a && - test_cmp expected file + compare_files expected file ' test_expect_failure 'cherry-pick patch from after text=auto was added' ' @@ -187,7 +199,7 @@ test_expect_failure 'cherry-pick patch from after text=auto was added' ' git reset --hard b && test_must_fail git cherry-pick a >err 2>&1 && grep "[Nn]othing added" err && - test_cmp expected file + compare_files expected file ' test_expect_success 'Test delete/normalize conflict' ' diff --git a/t/t6041-bisect-submodule.sh b/t/t6041-bisect-submodule.sh index c6b7aa6977..62b8a2e7bb 100755 --- a/t/t6041-bisect-submodule.sh +++ b/t/t6041-bisect-submodule.sh @@ -8,7 +8,7 @@ test_description='bisect can handle submodules' git_bisect () { git status -su >expect && ls -1pR * >>expect && - tar czf "$TRASH_DIRECTORY/tmp.tgz" * && + tar cf "$TRASH_DIRECTORY/tmp.tar" * && GOOD=$(git rev-parse --verify HEAD) && git checkout "$1" && echo "foo" >bar && @@ -20,7 +20,7 @@ git_bisect () { git bisect start && git bisect good $GOOD && rm -rf * && - tar xzf "$TRASH_DIRECTORY/tmp.tgz" && + tar xf "$TRASH_DIRECTORY/tmp.tar" && git status -su >actual && ls -1pR * >>actual && test_cmp expect actual && diff --git a/t/t6044-merge-unrelated-index-changes.sh b/t/t6044-merge-unrelated-index-changes.sh new file mode 100755 index 0000000000..01023486c5 --- /dev/null +++ b/t/t6044-merge-unrelated-index-changes.sh @@ -0,0 +1,153 @@ +#!/bin/sh + +test_description="merges with unrelated index changes" + +. ./test-lib.sh + +# Testcase for some simple merges +# A +# o-----o B +# \ +# \---o C +# \ +# \-o D +# \ +# o E +# Commit A: some file a +# Commit B: adds file b, modifies end of a +# Commit C: adds file c +# Commit D: adds file d, modifies beginning of a +# Commit E: renames a->subdir/a, adds subdir/e + +test_expect_success 'setup trivial merges' ' + test_seq 1 10 >a && + git add a && + test_tick && git commit -m A && + + git branch A && + git branch B && + git branch C && + git branch D && + git branch E && + + git checkout B && + echo b >b && + echo 11 >>a && + git add a b && + test_tick && git commit -m B && + + git checkout C && + echo c >c && + git add c && + test_tick && git commit -m C && + + git checkout D && + test_seq 2 10 >a && + echo d >d && + git add a d && + test_tick && git commit -m D && + + git checkout E && + mkdir subdir && + git mv a subdir/a && + echo e >subdir/e && + git add subdir && + test_tick && git commit -m E +' + +test_expect_success 'ff update' ' + git reset --hard && + git checkout A^0 && + + touch random_file && git add random_file && + + git merge E^0 && + + test_must_fail git rev-parse HEAD:random_file && + test "$(git diff --name-only --cached E)" = "random_file" +' + +test_expect_success 'ff update, important file modified' ' + git reset --hard && + git checkout A^0 && + + mkdir subdir && + touch subdir/e && + git add subdir/e && + + test_must_fail git merge E^0 +' + +test_expect_success 'resolve, trivial' ' + git reset --hard && + git checkout B^0 && + + touch random_file && git add random_file && + + test_must_fail git merge -s resolve C^0 +' + +test_expect_success 'resolve, non-trivial' ' + git reset --hard && + git checkout B^0 && + + touch random_file && git add random_file && + + test_must_fail git merge -s resolve D^0 +' + +test_expect_success 'recursive' ' + git reset --hard && + git checkout B^0 && + + touch random_file && git add random_file && + + test_must_fail git merge -s recursive C^0 +' + +test_expect_success 'octopus, unrelated file touched' ' + git reset --hard && + git checkout B^0 && + + touch random_file && git add random_file && + + test_must_fail git merge C^0 D^0 +' + +test_expect_success 'octopus, related file removed' ' + git reset --hard && + git checkout B^0 && + + git rm b && + + test_must_fail git merge C^0 D^0 +' + +test_expect_success 'octopus, related file modified' ' + git reset --hard && + git checkout B^0 && + + echo 12 >>a && git add a && + + test_must_fail git merge C^0 D^0 +' + +test_expect_success 'ours' ' + git reset --hard && + git checkout B^0 && + + touch random_file && git add random_file && + + test_must_fail git merge -s ours C^0 +' + +test_expect_success 'subtree' ' + git reset --hard && + git checkout B^0 && + + touch random_file && git add random_file && + + test_must_fail git merge -s subtree E^0 +' + +test_done diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index 4d5a25eedf..c630aba657 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -351,11 +351,15 @@ test_expect_success 'test --format long' ' test_cmp expected actual ' -test_expect_success 'setup a fake editor' ' - write_script fakeeditor <<-\EOF +test_expect_success 'setup fake editors' ' + write_script fakeeditor <<-\EOF && sed -e "s/A U Thor/A fake Thor/" "$1" >"$1.new" mv "$1.new" "$1" EOF + write_script failingfakeeditor <<-\EOF + ./fakeeditor "$@" + false + EOF ' test_expect_success '--edit with and without already replaced object' ' @@ -372,7 +376,7 @@ test_expect_success '--edit with and without already replaced object' ' test_expect_success '--edit and change nothing or command failed' ' git replace -d "$PARA3" && test_must_fail env GIT_EDITOR=true git replace --edit "$PARA3" && - test_must_fail env GIT_EDITOR="./fakeeditor;false" git replace --edit "$PARA3" && + test_must_fail env GIT_EDITOR="./failingfakeeditor" git replace --edit "$PARA3" && GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && git replace -l | grep "$PARA3" && git cat-file commit "$PARA3" | grep "A fake Thor" diff --git a/t/t6101-rev-parse-parents.sh b/t/t6101-rev-parse-parents.sh index 10b1452766..8c617981a3 100755 --- a/t/t6101-rev-parse-parents.sh +++ b/t/t6101-rev-parse-parents.sh @@ -19,7 +19,7 @@ test_expect_success 'setup' ' git checkout --orphan tmp && test_commit start2 && git checkout master && - git merge -m next start2 && + git merge -m next --allow-unrelated-histories start2 && test_commit final && test_seq 40 | @@ -83,12 +83,24 @@ test_expect_success 'final^1^@ = final^1^1 final^1^2' ' test_cmp expect actual ' +test_expect_success 'symbolic final^1^@ = final^1^1 final^1^2' ' + git rev-parse --symbolic final^1^1 final^1^2 >expect && + git rev-parse --symbolic final^1^@ >actual && + test_cmp expect actual +' + test_expect_success 'final^1^! = final^1 ^final^1^1 ^final^1^2' ' git rev-parse final^1 ^final^1^1 ^final^1^2 >expect && git rev-parse final^1^! >actual && test_cmp expect actual ' +test_expect_success 'symbolic final^1^! = final^1 ^final^1^1 ^final^1^2' ' + git rev-parse --symbolic final^1 ^final^1^1 ^final^1^2 >expect && + git rev-parse --symbolic final^1^! >actual && + test_cmp expect actual +' + test_expect_success 'large graft octopus' ' test_cmp_rev_output b31 "git rev-parse --verify b1^30" ' @@ -102,4 +114,104 @@ test_expect_success 'short SHA-1 works' ' test_cmp_rev_output start "git rev-parse ${start%?}" ' +# rev^- tests; we can use a simpler setup for these + +test_expect_success 'setup for rev^- tests' ' + test_commit one && + test_commit two && + test_commit three && + + # Merge in a branch for testing rev^- + git checkout -b branch && + git checkout HEAD^^ && + git merge -m merge --no-edit --no-ff branch && + git checkout -b merge +' + +# The merged branch has 2 commits + the merge +test_expect_success 'rev-list --count merge^- = merge^..merge' ' + git rev-list --count merge^..merge >expect && + echo 3 >actual && + test_cmp expect actual +' + +# All rev^- rev-parse tests + +test_expect_success 'rev-parse merge^- = merge^..merge' ' + git rev-parse merge^..merge >expect && + git rev-parse merge^- >actual && + test_cmp expect actual +' + +test_expect_success 'rev-parse merge^-1 = merge^..merge' ' + git rev-parse merge^1..merge >expect && + git rev-parse merge^-1 >actual && + test_cmp expect actual +' + +test_expect_success 'rev-parse merge^-2 = merge^2..merge' ' + git rev-parse merge^2..merge >expect && + git rev-parse merge^-2 >actual && + test_cmp expect actual +' + +test_expect_success 'symbolic merge^-1 = merge^1..merge' ' + git rev-parse --symbolic merge^1..merge >expect && + git rev-parse --symbolic merge^-1 >actual && + test_cmp expect actual +' + +test_expect_success 'rev-parse merge^-0 (invalid parent)' ' + test_must_fail git rev-parse merge^-0 +' + +test_expect_success 'rev-parse merge^-3 (invalid parent)' ' + test_must_fail git rev-parse merge^-3 +' + +test_expect_success 'rev-parse merge^-^ (garbage after ^-)' ' + test_must_fail git rev-parse merge^-^ +' + +test_expect_success 'rev-parse merge^-1x (garbage after ^-1)' ' + test_must_fail git rev-parse merge^-1x +' + +# All rev^- rev-list tests (should be mostly the same as rev-parse; the reason +# for the duplication is that rev-parse and rev-list use different parsers). + +test_expect_success 'rev-list merge^- = merge^..merge' ' + git rev-list merge^..merge >expect && + git rev-list merge^- >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list merge^-1 = merge^1..merge' ' + git rev-list merge^1..merge >expect && + git rev-list merge^-1 >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list merge^-2 = merge^2..merge' ' + git rev-list merge^2..merge >expect && + git rev-list merge^-2 >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list merge^-0 (invalid parent)' ' + test_must_fail git rev-list merge^-0 +' + +test_expect_success 'rev-list merge^-3 (invalid parent)' ' + test_must_fail git rev-list merge^-3 +' + +test_expect_success 'rev-list merge^-^ (garbage after ^-)' ' + test_must_fail git rev-list merge^-^ +' + +test_expect_success 'rev-list merge^-1x (garbage after ^-1)' ' + test_must_fail git rev-list merge^-1x +' + test_done diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index c0e5b2a627..85f269411c 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -113,6 +113,14 @@ check_describe A-3-* --long HEAD^^2 check_describe c-7-* --tags check_describe e-3-* --first-parent --tags +test_expect_success 'describe --contains defaults to HEAD without commit-ish' ' + echo "A^0" >expect && + git checkout A && + test_when_finished "git checkout -" && + git describe --contains >actual && + test_cmp expect actual +' + : >err.expect check_describe A --all A^0 test_expect_success 'no warning was displayed for A' ' diff --git a/t/t6132-pathspec-exclude.sh b/t/t6132-pathspec-exclude.sh index e1e1b1fa38..d51595cf6b 100755 --- a/t/t6132-pathspec-exclude.sh +++ b/t/t6132-pathspec-exclude.sh @@ -7,7 +7,7 @@ test_description='test case exclude pathspec' test_expect_success 'setup' ' for p in file sub/file sub/sub/file sub/file2 sub/sub/sub/file sub2/file; do if echo $p | grep /; then - mkdir -p `dirname $p` + mkdir -p $(dirname $p) fi && : >$p && git add $p && diff --git a/t/t6133-pathspec-rev-dwim.sh b/t/t6133-pathspec-rev-dwim.sh new file mode 100755 index 0000000000..a290ffca0d --- /dev/null +++ b/t/t6133-pathspec-rev-dwim.sh @@ -0,0 +1,48 @@ +#!/bin/sh + +test_description='test dwim of revs versus pathspecs in revision parser' +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit base && + echo content >"br[ack]ets" && + git add . && + test_tick && + git commit -m brackets +' + +test_expect_success 'non-rev wildcard dwims to pathspec' ' + git log -- "*.t" >expect && + git log "*.t" >actual && + test_cmp expect actual +' + +test_expect_success 'tree:path with metacharacters dwims to rev' ' + git show "HEAD:br[ack]ets" -- >expect && + git show "HEAD:br[ack]ets" >actual && + test_cmp expect actual +' + +test_expect_success '^{foo} with metacharacters dwims to rev' ' + git log "HEAD^{/b.*}" -- >expect && + git log "HEAD^{/b.*}" >actual && + test_cmp expect actual +' + +test_expect_success '@{foo} with metacharacters dwims to rev' ' + git log "HEAD@{now [or thereabouts]}" -- >expect && + git log "HEAD@{now [or thereabouts]}" >actual && + test_cmp expect actual +' + +test_expect_success ':/*.t from a subdir dwims to a pathspec' ' + mkdir subdir && + ( + cd subdir && + git log -- ":/*.t" >expect && + git log ":/*.t" >actual && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t6134-pathspec-in-submodule.sh b/t/t6134-pathspec-in-submodule.sh new file mode 100755 index 0000000000..fd401ca605 --- /dev/null +++ b/t/t6134-pathspec-in-submodule.sh @@ -0,0 +1,36 @@ +#!/bin/sh + +test_description='test case exclude pathspec' + +. ./test-lib.sh + +test_expect_success 'setup a submodule' ' + test_create_repo pretzel && + : >pretzel/a && + git -C pretzel add a && + git -C pretzel commit -m "add a file" -- a && + git submodule add ./pretzel sub && + git commit -a -m "add submodule" && + git submodule deinit --all +' + +cat <<EOF >expect +fatal: Pathspec 'sub/a' is in submodule 'sub' +EOF + +test_expect_success 'error message for path inside submodule' ' + echo a >sub/a && + test_must_fail git add sub/a 2>actual && + test_cmp expect actual +' + +cat <<EOF >expect +fatal: Pathspec '.' is in submodule 'sub' +EOF + +test_expect_success 'error message for path inside submodule from within submodule' ' + test_must_fail git -C sub add . 2>actual && + test_cmp expect actual +' + +test_done diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 24fc2ba55d..aea1dfc714 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -8,8 +8,8 @@ test_description='for-each-ref test' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-gpg.sh -# Mon Jul 3 15:18:43 2006 +0000 -datestamp=1151939923 +# Mon Jul 3 23:18:43 2006 +0000 +datestamp=1151968723 setdate_and_increment () { GIT_COMMITTER_DATE="$datestamp +0200" datestamp=$(expr "$datestamp" + 1) @@ -49,11 +49,17 @@ test_atom() { } test_atom head refname refs/heads/master +test_atom head refname:short master +test_atom head refname:strip=1 heads/master +test_atom head refname:strip=2 master test_atom head upstream refs/remotes/origin/master +test_atom head upstream:short origin/master test_atom head push refs/remotes/myfork/master +test_atom head push:short myfork/master test_atom head objecttype commit test_atom head objectsize 171 test_atom head objectname $(git rev-parse refs/heads/master) +test_atom head objectname:short $(git rev-parse --short refs/heads/master) test_atom head tree $(git rev-parse refs/heads/master^{tree}) test_atom head parent '' test_atom head numparent 0 @@ -61,21 +67,21 @@ test_atom head object '' test_atom head type '' test_atom head '*objectname' '' test_atom head '*objecttype' '' -test_atom head author 'A U Thor <author@example.com> 1151939924 +0200' +test_atom head author 'A U Thor <author@example.com> 1151968724 +0200' test_atom head authorname 'A U Thor' test_atom head authoremail '<author@example.com>' -test_atom head authordate 'Mon Jul 3 17:18:44 2006 +0200' -test_atom head committer 'C O Mitter <committer@example.com> 1151939923 +0200' +test_atom head authordate 'Tue Jul 4 01:18:44 2006 +0200' +test_atom head committer 'C O Mitter <committer@example.com> 1151968723 +0200' test_atom head committername 'C O Mitter' test_atom head committeremail '<committer@example.com>' -test_atom head committerdate 'Mon Jul 3 17:18:43 2006 +0200' +test_atom head committerdate 'Tue Jul 4 01:18:43 2006 +0200' test_atom head tag '' test_atom head tagger '' test_atom head taggername '' test_atom head taggeremail '' test_atom head taggerdate '' -test_atom head creator 'C O Mitter <committer@example.com> 1151939923 +0200' -test_atom head creatordate 'Mon Jul 3 17:18:43 2006 +0200' +test_atom head creator 'C O Mitter <committer@example.com> 1151968723 +0200' +test_atom head creatordate 'Tue Jul 4 01:18:43 2006 +0200' test_atom head subject 'Initial' test_atom head contents:subject 'Initial' test_atom head body '' @@ -86,17 +92,19 @@ test_atom head contents 'Initial test_atom head HEAD '*' test_atom tag refname refs/tags/testtag +test_atom tag refname:short testtag test_atom tag upstream '' test_atom tag push '' test_atom tag objecttype tag test_atom tag objectsize 154 test_atom tag objectname $(git rev-parse refs/tags/testtag) +test_atom tag objectname:short $(git rev-parse --short refs/tags/testtag) test_atom tag tree '' test_atom tag parent '' test_atom tag numparent '' test_atom tag object $(git rev-parse refs/tags/testtag^0) test_atom tag type 'commit' -test_atom tag '*objectname' '67a36f10722846e891fbada1ba48ed035de75581' +test_atom tag '*objectname' 'ea122842f48be4afb2d1fc6a4b96c05885ab7463' test_atom tag '*objecttype' 'commit' test_atom tag author '' test_atom tag authorname '' @@ -107,18 +115,18 @@ test_atom tag committername '' test_atom tag committeremail '' test_atom tag committerdate '' test_atom tag tag 'testtag' -test_atom tag tagger 'C O Mitter <committer@example.com> 1151939925 +0200' +test_atom tag tagger 'C O Mitter <committer@example.com> 1151968725 +0200' test_atom tag taggername 'C O Mitter' test_atom tag taggeremail '<committer@example.com>' -test_atom tag taggerdate 'Mon Jul 3 17:18:45 2006 +0200' -test_atom tag creator 'C O Mitter <committer@example.com> 1151939925 +0200' -test_atom tag creatordate 'Mon Jul 3 17:18:45 2006 +0200' -test_atom tag subject 'Tagging at 1151939927' -test_atom tag contents:subject 'Tagging at 1151939927' +test_atom tag taggerdate 'Tue Jul 4 01:18:45 2006 +0200' +test_atom tag creator 'C O Mitter <committer@example.com> 1151968725 +0200' +test_atom tag creatordate 'Tue Jul 4 01:18:45 2006 +0200' +test_atom tag subject 'Tagging at 1151968727' +test_atom tag contents:subject 'Tagging at 1151968727' test_atom tag body '' test_atom tag contents:body '' test_atom tag contents:signature '' -test_atom tag contents 'Tagging at 1151939927 +test_atom tag contents 'Tagging at 1151968727 ' test_atom tag HEAD ' ' @@ -126,6 +134,16 @@ test_expect_success 'Check invalid atoms names are errors' ' test_must_fail git for-each-ref --format="%(INVALID)" refs/heads ' +test_expect_success 'arguments to :strip must be positive integers' ' + test_must_fail git for-each-ref --format="%(refname:strip=0)" && + test_must_fail git for-each-ref --format="%(refname:strip=-1)" && + test_must_fail git for-each-ref --format="%(refname:strip=foo)" +' + +test_expect_success 'stripping refnames too far gives an error' ' + test_must_fail git for-each-ref --format="%(refname:strip=3)" +' + test_expect_success 'Check format specifiers are ignored in naming date atoms' ' git for-each-ref --format="%(authordate)" refs/heads && git for-each-ref --format="%(authordate:default) %(authordate)" refs/heads && @@ -146,84 +164,130 @@ test_expect_success 'Check invalid format specifiers are errors' ' test_must_fail git for-each-ref --format="%(authordate:INVALID)" refs/heads ' -cat >expected <<\EOF -'refs/heads/master' 'Mon Jul 3 17:18:43 2006 +0200' 'Mon Jul 3 17:18:44 2006 +0200' -'refs/tags/testtag' 'Mon Jul 3 17:18:45 2006 +0200' -EOF +test_date () { + f=$1 && + committer_date=$2 && + author_date=$3 && + tagger_date=$4 && + cat >expected <<-EOF && + 'refs/heads/master' '$committer_date' '$author_date' + 'refs/tags/testtag' '$tagger_date' + EOF + ( + git for-each-ref --shell \ + --format="%(refname) %(committerdate${f:+:$f}) %(authordate${f:+:$f})" \ + refs/heads && + git for-each-ref --shell \ + --format="%(refname) %(taggerdate${f:+:$f})" \ + refs/tags + ) >actual && + test_cmp expected actual +} test_expect_success 'Check unformatted date fields output' ' - (git for-each-ref --shell --format="%(refname) %(committerdate) %(authordate)" refs/heads && - git for-each-ref --shell --format="%(refname) %(taggerdate)" refs/tags) >actual && - test_cmp expected actual + test_date "" \ + "Tue Jul 4 01:18:43 2006 +0200" \ + "Tue Jul 4 01:18:44 2006 +0200" \ + "Tue Jul 4 01:18:45 2006 +0200" ' test_expect_success 'Check format "default" formatted date fields output' ' - f=default && - (git for-each-ref --shell --format="%(refname) %(committerdate:$f) %(authordate:$f)" refs/heads && - git for-each-ref --shell --format="%(refname) %(taggerdate:$f)" refs/tags) >actual && - test_cmp expected actual + test_date default \ + "Tue Jul 4 01:18:43 2006 +0200" \ + "Tue Jul 4 01:18:44 2006 +0200" \ + "Tue Jul 4 01:18:45 2006 +0200" +' + +test_expect_success 'Check format "default-local" date fields output' ' + test_date default-local "Mon Jul 3 23:18:43 2006" "Mon Jul 3 23:18:44 2006" "Mon Jul 3 23:18:45 2006" ' # Don't know how to do relative check because I can't know when this script # is going to be run and can't fake the current time to git, and hence can't # provide expected output. Instead, I'll just make sure that "relative" # doesn't exit in error -# -#cat >expected <<\EOF -# -#EOF -# test_expect_success 'Check format "relative" date fields output' ' f=relative && (git for-each-ref --shell --format="%(refname) %(committerdate:$f) %(authordate:$f)" refs/heads && git for-each-ref --shell --format="%(refname) %(taggerdate:$f)" refs/tags) >actual ' -cat >expected <<\EOF -'refs/heads/master' '2006-07-03' '2006-07-03' -'refs/tags/testtag' '2006-07-03' -EOF +# We just check that this is the same as "relative" for now. +test_expect_success 'Check format "relative-local" date fields output' ' + test_date relative-local \ + "$(git for-each-ref --format="%(committerdate:relative)" refs/heads)" \ + "$(git for-each-ref --format="%(authordate:relative)" refs/heads)" \ + "$(git for-each-ref --format="%(taggerdate:relative)" refs/tags)" +' test_expect_success 'Check format "short" date fields output' ' - f=short && - (git for-each-ref --shell --format="%(refname) %(committerdate:$f) %(authordate:$f)" refs/heads && - git for-each-ref --shell --format="%(refname) %(taggerdate:$f)" refs/tags) >actual && - test_cmp expected actual + test_date short 2006-07-04 2006-07-04 2006-07-04 ' -cat >expected <<\EOF -'refs/heads/master' 'Mon Jul 3 15:18:43 2006' 'Mon Jul 3 15:18:44 2006' -'refs/tags/testtag' 'Mon Jul 3 15:18:45 2006' -EOF +test_expect_success 'Check format "short-local" date fields output' ' + test_date short-local 2006-07-03 2006-07-03 2006-07-03 +' test_expect_success 'Check format "local" date fields output' ' - f=local && - (git for-each-ref --shell --format="%(refname) %(committerdate:$f) %(authordate:$f)" refs/heads && - git for-each-ref --shell --format="%(refname) %(taggerdate:$f)" refs/tags) >actual && - test_cmp expected actual + test_date local \ + "Mon Jul 3 23:18:43 2006" \ + "Mon Jul 3 23:18:44 2006" \ + "Mon Jul 3 23:18:45 2006" ' -cat >expected <<\EOF -'refs/heads/master' '2006-07-03 17:18:43 +0200' '2006-07-03 17:18:44 +0200' -'refs/tags/testtag' '2006-07-03 17:18:45 +0200' -EOF - test_expect_success 'Check format "iso8601" date fields output' ' - f=iso8601 && - (git for-each-ref --shell --format="%(refname) %(committerdate:$f) %(authordate:$f)" refs/heads && - git for-each-ref --shell --format="%(refname) %(taggerdate:$f)" refs/tags) >actual && - test_cmp expected actual + test_date iso8601 \ + "2006-07-04 01:18:43 +0200" \ + "2006-07-04 01:18:44 +0200" \ + "2006-07-04 01:18:45 +0200" ' -cat >expected <<\EOF -'refs/heads/master' 'Mon, 3 Jul 2006 17:18:43 +0200' 'Mon, 3 Jul 2006 17:18:44 +0200' -'refs/tags/testtag' 'Mon, 3 Jul 2006 17:18:45 +0200' -EOF +test_expect_success 'Check format "iso8601-local" date fields output' ' + test_date iso8601-local "2006-07-03 23:18:43 +0000" "2006-07-03 23:18:44 +0000" "2006-07-03 23:18:45 +0000" +' test_expect_success 'Check format "rfc2822" date fields output' ' - f=rfc2822 && - (git for-each-ref --shell --format="%(refname) %(committerdate:$f) %(authordate:$f)" refs/heads && - git for-each-ref --shell --format="%(refname) %(taggerdate:$f)" refs/tags) >actual && + test_date rfc2822 \ + "Tue, 4 Jul 2006 01:18:43 +0200" \ + "Tue, 4 Jul 2006 01:18:44 +0200" \ + "Tue, 4 Jul 2006 01:18:45 +0200" +' + +test_expect_success 'Check format "rfc2822-local" date fields output' ' + test_date rfc2822-local "Mon, 3 Jul 2006 23:18:43 +0000" "Mon, 3 Jul 2006 23:18:44 +0000" "Mon, 3 Jul 2006 23:18:45 +0000" +' + +test_expect_success 'Check format "raw" date fields output' ' + test_date raw "1151968723 +0200" "1151968724 +0200" "1151968725 +0200" +' + +test_expect_success 'Check format "raw-local" date fields output' ' + test_date raw-local "1151968723 +0000" "1151968724 +0000" "1151968725 +0000" +' + +test_expect_success 'Check format of strftime date fields' ' + echo "my date is 2006-07-04" >expected && + git for-each-ref \ + --format="%(authordate:format:my date is %Y-%m-%d)" \ + refs/heads >actual && + test_cmp expected actual +' + +test_expect_success 'Check format of strftime-local date fields' ' + echo "my date is 2006-07-03" >expected && + git for-each-ref \ + --format="%(authordate:format-local:my date is %Y-%m-%d)" \ + refs/heads >actual && + test_cmp expected actual +' + +test_expect_success 'exercise strftime with odd fields' ' + echo >expected && + git for-each-ref --format="%(authordate:format:)" refs/heads >actual && + test_cmp expected actual && + long="long format -- $_z40$_z40$_z40$_z40$_z40$_z40$_z40" && + echo $long >expected && + git for-each-ref --format="%(authordate:format:$long)" refs/heads >actual && test_cmp expected actual ' @@ -292,47 +356,14 @@ for i in "--perl --shell" "-s --python" "--python --tcl" "--tcl --perl"; do " done -cat >expected <<\EOF -master -testtag -EOF - -test_expect_success 'Check short refname format' ' - (git for-each-ref --format="%(refname:short)" refs/heads && - git for-each-ref --format="%(refname:short)" refs/tags) >actual && - test_cmp expected actual -' - -cat >expected <<EOF -origin/master -EOF - -test_expect_success 'Check short upstream format' ' - git for-each-ref --format="%(upstream:short)" refs/heads >actual && - test_cmp expected actual -' - test_expect_success 'setup for upstream:track[short]' ' test_commit two ' -cat >expected <<EOF -[ahead 1] -EOF - -test_expect_success 'Check upstream:track format' ' - git for-each-ref --format="%(upstream:track)" refs/heads >actual && - test_cmp expected actual -' - -cat >expected <<EOF -> -EOF - -test_expect_success 'Check upstream:trackshort format' ' - git for-each-ref --format="%(upstream:trackshort)" refs/heads >actual && - test_cmp expected actual -' +test_atom head upstream:track '[ahead 1]' +test_atom head upstream:trackshort '>' +test_atom head push:track '[ahead 1]' +test_atom head push:trackshort '>' test_expect_success 'Check that :track[short] cannot be used with other atoms' ' test_must_fail git for-each-ref --format="%(refname:track)" 2>/dev/null && @@ -352,21 +383,6 @@ test_expect_success 'Check that :track[short] works when upstream is invalid' ' test_cmp expected actual ' -test_expect_success '%(push) supports tracking specifiers, too' ' - echo "[ahead 1]" >expected && - git for-each-ref --format="%(push:track)" refs/heads >actual && - test_cmp expected actual -' - -cat >expected <<EOF -$(git rev-parse --short HEAD) -EOF - -test_expect_success 'Check short objectname format' ' - git for-each-ref --format="%(objectname:short)" refs/heads >actual && - test_cmp expected actual -' - test_expect_success 'Check for invalid refname format' ' test_must_fail git for-each-ref --format="%(refname:INVALID)" ' @@ -528,8 +544,8 @@ body contents $sig" cat >expected <<EOF -$(git rev-parse refs/tags/master) <committer@example.com> refs/tags/master $(git rev-parse refs/tags/bogo) <committer@example.com> refs/tags/bogo +$(git rev-parse refs/tags/master) <committer@example.com> refs/tags/master EOF test_expect_success 'Verify sort with multiple keys' ' @@ -537,4 +553,39 @@ test_expect_success 'Verify sort with multiple keys' ' refs/tags/bogo refs/tags/master > actual && test_cmp expected actual ' + +test_expect_success 'do not dereference NULL upon %(HEAD) on unborn branch' ' + test_when_finished "git checkout master" && + git for-each-ref --format="%(HEAD) %(refname:short)" refs/heads/ >actual && + sed -e "s/^\* / /" actual >expect && + git checkout --orphan HEAD && + git for-each-ref --format="%(HEAD) %(refname:short)" refs/heads/ >actual && + test_cmp expect actual +' + +cat >trailers <<EOF +Reviewed-by: A U Thor <author@example.com> +Signed-off-by: A U Thor <author@example.com> +EOF + +test_expect_success 'basic atom: head contents:trailers' ' + echo "Some contents" > two && + git add two && + git commit -F - <<-EOF && + trailers: this commit message has trailers + + Some message contents + + $(cat trailers) + EOF + git for-each-ref --format="%(contents:trailers)" refs/heads/master >actual && + sanitize_pgp <actual >actual.clean && + # git for-each-ref ends with a blank line + cat >expect <<-EOF && + $(cat trailers) + + EOF + test_cmp expect actual.clean +' + test_done diff --git a/t/t6301-for-each-ref-errors.sh b/t/t6301-for-each-ref-errors.sh new file mode 100755 index 0000000000..c734ce2388 --- /dev/null +++ b/t/t6301-for-each-ref-errors.sh @@ -0,0 +1,56 @@ +#!/bin/sh + +test_description='for-each-ref errors for broken refs' + +. ./test-lib.sh + +ZEROS=$_z40 +MISSING=abababababababababababababababababababab + +test_expect_success setup ' + git commit --allow-empty -m "Initial" && + git tag testtag && + git for-each-ref >full-list && + git for-each-ref --format="%(objectname) %(refname)" >brief-list +' + +test_expect_success 'Broken refs are reported correctly' ' + r=refs/heads/bogus && + : >.git/$r && + test_when_finished "rm -f .git/$r" && + echo "warning: ignoring broken ref $r" >broken-err && + git for-each-ref >out 2>err && + test_i18ncmp full-list out && + test_i18ncmp broken-err err +' + +test_expect_success 'NULL_SHA1 refs are reported correctly' ' + r=refs/heads/zeros && + echo $ZEROS >.git/$r && + test_when_finished "rm -f .git/$r" && + echo "warning: ignoring broken ref $r" >zeros-err && + git for-each-ref >out 2>err && + test_cmp full-list out && + test_i18ncmp zeros-err err && + git for-each-ref --format="%(objectname) %(refname)" >brief-out 2>brief-err && + test_cmp brief-list brief-out && + test_i18ncmp zeros-err brief-err +' + +test_expect_success 'Missing objects are reported correctly' ' + r=refs/heads/missing && + echo $MISSING >.git/$r && + test_when_finished "rm -f .git/$r" && + echo "fatal: missing object $MISSING for $r" >missing-err && + test_must_fail git for-each-ref 2>err && + test_i18ncmp missing-err err && + ( + cat brief-list && + echo "$MISSING $r" + ) | sort -k 2 >missing-brief-expected && + git for-each-ref --format="%(objectname) %(refname)" >brief-out 2>brief-err && + test_cmp missing-brief-expected brief-out && + test_must_be_empty brief-err +' + +test_done diff --git a/t/t6302-for-each-ref-filter.sh b/t/t6302-for-each-ref-filter.sh new file mode 100755 index 0000000000..d0ab09f4bd --- /dev/null +++ b/t/t6302-for-each-ref-filter.sh @@ -0,0 +1,330 @@ +#!/bin/sh + +test_description='test for-each-refs usage of ref-filter APIs' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-gpg.sh + +test_expect_success 'setup some history and refs' ' + test_commit one && + test_commit two && + test_commit three && + git checkout -b side && + test_commit four && + git tag -m "An annotated tag" annotated-tag && + git tag -m "Annonated doubly" doubly-annotated-tag annotated-tag && + + # Note that these "signed" tags might not actually be signed. + # Tests which care about the distinction should be marked + # with the GPG prereq. + if test_have_prereq GPG + then + sign=-s + else + sign= + fi && + git tag $sign -m "A signed tag" signed-tag && + git tag $sign -m "Signed doubly" doubly-signed-tag signed-tag && + + git checkout master && + git update-ref refs/odd/spot master +' + +test_expect_success 'filtering with --points-at' ' + cat >expect <<-\EOF && + refs/heads/master + refs/odd/spot + refs/tags/three + EOF + git for-each-ref --format="%(refname)" --points-at=master >actual && + test_cmp expect actual +' + +test_expect_success 'check signed tags with --points-at' ' + sed -e "s/Z$//" >expect <<-\EOF && + refs/heads/side Z + refs/tags/annotated-tag four + refs/tags/four Z + refs/tags/signed-tag four + EOF + git for-each-ref --format="%(refname) %(*subject)" --points-at=side >actual && + test_cmp expect actual +' + +test_expect_success 'filtering with --merged' ' + cat >expect <<-\EOF && + refs/heads/master + refs/odd/spot + refs/tags/one + refs/tags/three + refs/tags/two + EOF + git for-each-ref --format="%(refname)" --merged=master >actual && + test_cmp expect actual +' + +test_expect_success 'filtering with --no-merged' ' + cat >expect <<-\EOF && + refs/heads/side + refs/tags/annotated-tag + refs/tags/doubly-annotated-tag + refs/tags/doubly-signed-tag + refs/tags/four + refs/tags/signed-tag + EOF + git for-each-ref --format="%(refname)" --no-merged=master >actual && + test_cmp expect actual +' + +test_expect_success 'filtering with --contains' ' + cat >expect <<-\EOF && + refs/heads/master + refs/heads/side + refs/odd/spot + refs/tags/annotated-tag + refs/tags/doubly-annotated-tag + refs/tags/doubly-signed-tag + refs/tags/four + refs/tags/signed-tag + refs/tags/three + refs/tags/two + EOF + git for-each-ref --format="%(refname)" --contains=two >actual && + test_cmp expect actual +' + +test_expect_success '%(color) must fail' ' + test_must_fail git for-each-ref --format="%(color)%(refname)" +' + +test_expect_success 'left alignment is default' ' + cat >expect <<-\EOF && + refname is refs/heads/master |refs/heads/master + refname is refs/heads/side |refs/heads/side + refname is refs/odd/spot |refs/odd/spot + refname is refs/tags/annotated-tag|refs/tags/annotated-tag + refname is refs/tags/doubly-annotated-tag|refs/tags/doubly-annotated-tag + refname is refs/tags/doubly-signed-tag|refs/tags/doubly-signed-tag + refname is refs/tags/four |refs/tags/four + refname is refs/tags/one |refs/tags/one + refname is refs/tags/signed-tag|refs/tags/signed-tag + refname is refs/tags/three |refs/tags/three + refname is refs/tags/two |refs/tags/two + EOF + git for-each-ref --format="%(align:30)refname is %(refname)%(end)|%(refname)" >actual && + test_cmp expect actual +' + +test_expect_success 'middle alignment' ' + cat >expect <<-\EOF && + | refname is refs/heads/master |refs/heads/master + | refname is refs/heads/side |refs/heads/side + | refname is refs/odd/spot |refs/odd/spot + |refname is refs/tags/annotated-tag|refs/tags/annotated-tag + |refname is refs/tags/doubly-annotated-tag|refs/tags/doubly-annotated-tag + |refname is refs/tags/doubly-signed-tag|refs/tags/doubly-signed-tag + | refname is refs/tags/four |refs/tags/four + | refname is refs/tags/one |refs/tags/one + |refname is refs/tags/signed-tag|refs/tags/signed-tag + | refname is refs/tags/three |refs/tags/three + | refname is refs/tags/two |refs/tags/two + EOF + git for-each-ref --format="|%(align:middle,30)refname is %(refname)%(end)|%(refname)" >actual && + test_cmp expect actual +' + +test_expect_success 'right alignment' ' + cat >expect <<-\EOF && + | refname is refs/heads/master|refs/heads/master + | refname is refs/heads/side|refs/heads/side + | refname is refs/odd/spot|refs/odd/spot + |refname is refs/tags/annotated-tag|refs/tags/annotated-tag + |refname is refs/tags/doubly-annotated-tag|refs/tags/doubly-annotated-tag + |refname is refs/tags/doubly-signed-tag|refs/tags/doubly-signed-tag + | refname is refs/tags/four|refs/tags/four + | refname is refs/tags/one|refs/tags/one + |refname is refs/tags/signed-tag|refs/tags/signed-tag + | refname is refs/tags/three|refs/tags/three + | refname is refs/tags/two|refs/tags/two + EOF + git for-each-ref --format="|%(align:30,right)refname is %(refname)%(end)|%(refname)" >actual && + test_cmp expect actual +' + +cat >expect <<-\EOF +| refname is refs/heads/master |refs/heads/master +| refname is refs/heads/side |refs/heads/side +| refname is refs/odd/spot |refs/odd/spot +| refname is refs/tags/annotated-tag |refs/tags/annotated-tag +|refname is refs/tags/doubly-annotated-tag |refs/tags/doubly-annotated-tag +| refname is refs/tags/doubly-signed-tag |refs/tags/doubly-signed-tag +| refname is refs/tags/four |refs/tags/four +| refname is refs/tags/one |refs/tags/one +| refname is refs/tags/signed-tag |refs/tags/signed-tag +| refname is refs/tags/three |refs/tags/three +| refname is refs/tags/two |refs/tags/two +EOF + +test_align_permutations() { + while read -r option + do + test_expect_success "align:$option" ' + git for-each-ref --format="|%(align:$option)refname is %(refname)%(end)|%(refname)" >actual && + test_cmp expect actual + ' + done +} + +test_align_permutations <<-\EOF + middle,42 + 42,middle + position=middle,42 + 42,position=middle + middle,width=42 + width=42,middle + position=middle,width=42 + width=42,position=middle +EOF + +# Last one wins (silently) when multiple arguments of the same type are given + +test_align_permutations <<-\EOF + 32,width=42,middle + width=30,42,middle + width=42,position=right,middle + 42,right,position=middle +EOF + +# Individual atoms inside %(align:...) and %(end) must not be quoted. + +test_expect_success 'alignment with format quote' " + cat >expect <<-\EOF && + |' '\''master| A U Thor'\'' '| + |' '\''side| A U Thor'\'' '| + |' '\''odd/spot| A U Thor'\'' '| + |' '\''annotated-tag| '\'' '| + |' '\''doubly-annotated-tag| '\'' '| + |' '\''doubly-signed-tag| '\'' '| + |' '\''four| A U Thor'\'' '| + |' '\''one| A U Thor'\'' '| + |' '\''signed-tag| '\'' '| + |' '\''three| A U Thor'\'' '| + |' '\''two| A U Thor'\'' '| + EOF + git for-each-ref --shell --format=\"|%(align:30,middle)'%(refname:short)| %(authorname)'%(end)|\" >actual && + test_cmp expect actual +" + +test_expect_success 'nested alignment with quote formatting' " + cat >expect <<-\EOF && + |' master '| + |' side '| + |' odd/spot '| + |' annotated-tag '| + |'doubly-annotated-tag '| + |'doubly-signed-tag '| + |' four '| + |' one '| + |' signed-tag '| + |' three '| + |' two '| + EOF + git for-each-ref --shell --format='|%(align:30,left)%(align:15,right)%(refname:short)%(end)%(end)|' >actual && + test_cmp expect actual +" + +test_expect_success 'check `%(contents:lines=1)`' ' + cat >expect <<-\EOF && + master |three + side |four + odd/spot |three + annotated-tag |An annotated tag + doubly-annotated-tag |Annonated doubly + doubly-signed-tag |Signed doubly + four |four + one |one + signed-tag |A signed tag + three |three + two |two + EOF + git for-each-ref --format="%(refname:short) |%(contents:lines=1)" >actual && + test_cmp expect actual +' + +test_expect_success 'check `%(contents:lines=0)`' ' + cat >expect <<-\EOF && + master | + side | + odd/spot | + annotated-tag | + doubly-annotated-tag | + doubly-signed-tag | + four | + one | + signed-tag | + three | + two | + EOF + git for-each-ref --format="%(refname:short) |%(contents:lines=0)" >actual && + test_cmp expect actual +' + +test_expect_success 'check `%(contents:lines=99999)`' ' + cat >expect <<-\EOF && + master |three + side |four + odd/spot |three + annotated-tag |An annotated tag + doubly-annotated-tag |Annonated doubly + doubly-signed-tag |Signed doubly + four |four + one |one + signed-tag |A signed tag + three |three + two |two + EOF + git for-each-ref --format="%(refname:short) |%(contents:lines=99999)" >actual && + test_cmp expect actual +' + +test_expect_success '`%(contents:lines=-1)` should fail' ' + test_must_fail git for-each-ref --format="%(refname:short) |%(contents:lines=-1)" +' + +test_expect_success 'setup for version sort' ' + test_commit foo1.3 && + test_commit foo1.6 && + test_commit foo1.10 +' + +test_expect_success 'version sort' ' + git for-each-ref --sort=version:refname --format="%(refname:short)" refs/tags/ | grep "foo" >actual && + cat >expect <<-\EOF && + foo1.3 + foo1.6 + foo1.10 + EOF + test_cmp expect actual +' + +test_expect_success 'version sort (shortened)' ' + git for-each-ref --sort=v:refname --format="%(refname:short)" refs/tags/ | grep "foo" >actual && + cat >expect <<-\EOF && + foo1.3 + foo1.6 + foo1.10 + EOF + test_cmp expect actual +' + +test_expect_success 'reverse version sort' ' + git for-each-ref --sort=-version:refname --format="%(refname:short)" refs/tags/ | grep "foo" >actual && + cat >expect <<-\EOF && + foo1.10 + foo1.6 + foo1.3 + EOF + test_cmp expect actual +' + +test_done diff --git a/t/t6500-gc.sh b/t/t6500-gc.sh index 63194d819e..1762dfa6a3 100755 --- a/t/t6500-gc.sh +++ b/t/t6500-gc.sh @@ -30,4 +30,42 @@ test_expect_success 'gc -h with invalid configuration' ' test_i18ngrep "[Uu]sage" broken/usage ' +test_expect_success 'gc is not aborted due to a stale symref' ' + git init remote && + ( + cd remote && + test_commit initial && + git clone . ../client && + git branch -m develop && + cd ../client && + git fetch --prune && + git gc + ) +' + +test_expect_success 'auto gc with too many loose objects does not attempt to create bitmaps' ' + test_config gc.auto 3 && + test_config gc.autodetach false && + test_config pack.writebitmaps true && + # We need to create two object whose sha1s start with 17 + # since this is what git gc counts. As it happens, these + # two blobs will do so. + test_commit 263 && + test_commit 410 && + # Our first gc will create a pack; our second will create a second pack + git gc --auto && + ls .git/objects/pack | sort >existing_packs && + test_commit 523 && + test_commit 790 && + + git gc --auto 2>err && + test_i18ngrep ! "^warning:" err && + ls .git/objects/pack/ | sort >post_packs && + comm -1 -3 existing_packs post_packs >new && + comm -2 -3 existing_packs post_packs >del && + test_line_count = 0 del && # No packs are deleted + test_line_count = 2 new # There is one new pack and its .idx +' + + test_done diff --git a/t/t6501-freshen-objects.sh b/t/t6501-freshen-objects.sh index 2adf825076..cf076dcd94 100755 --- a/t/t6501-freshen-objects.sh +++ b/t/t6501-freshen-objects.sh @@ -56,7 +56,7 @@ for repack in '' true; do test_expect_success "disable reflogs ($title)" ' git config core.logallrefupdates false && - rm -rf .git/logs + git reflog expire --expire=all --all ' test_expect_success "setup basic history ($title)" ' diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index 7b56081137..e365d1ff77 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -102,7 +102,7 @@ test_expect_success \ test_expect_success \ 'adding another file' \ - 'cp "$TEST_DIRECTORY"/../README path0/README && + 'cp "$TEST_DIRECTORY"/../README.md path0/README && git add path0/README && git commit -m add2 -a' @@ -156,11 +156,11 @@ test_expect_success "Michael Cassar's test case" ' echo b > partA/outline.txt && echo c > papers/unsorted/_another && git add papers partA && - T1=`git write-tree` && + T1=$(git write-tree) && git mv papers/unsorted/Thesis.pdf papers/all-papers/moo-blah.pdf && - T=`git write-tree` && + T=$(git write-tree) && git ls-tree -r $T | verbose grep partA/outline.txt ' @@ -292,6 +292,9 @@ test_expect_success 'setup submodule' ' echo content >file && git add file && git commit -m "added sub and file" && + mkdir -p deep/directory/hierarchy && + git submodule add ./. deep/directory/hierarchy/sub && + git commit -m "added another submodule" && git branch submodule ' @@ -475,4 +478,17 @@ test_expect_success 'mv -k does not accidentally destroy submodules' ' git checkout . ' +test_expect_success 'moving a submodule in nested directories' ' + ( + cd deep && + git mv directory ../ && + # git status would fail if the update of linking git dir to + # work dir of the submodule failed. + git status && + git config -f ../.gitmodules submodule.deep/directory/hierarchy/sub.path >../actual && + echo "directory/hierarchy/sub" >../expect + ) && + test_cmp actual expect +' + test_done diff --git a/t/t7003-filter-branch.sh b/t/t7003-filter-branch.sh index 855afda80a..cb8fbd8e5e 100755 --- a/t/t7003-filter-branch.sh +++ b/t/t7003-filter-branch.sh @@ -2,6 +2,7 @@ test_description='git filter-branch' . ./test-lib.sh +. "$TEST_DIRECTORY/lib-gpg.sh" test_expect_success 'setup' ' test_commit A && @@ -292,6 +293,19 @@ test_expect_success 'Tag name filtering strips gpg signature' ' test_cmp expect actual ' +test_expect_success GPG 'Filtering retains message of gpg signed commit' ' + mkdir gpg && + touch gpg/foo && + git add gpg && + test_tick && + git commit -S -m "Adding gpg" && + + git log -1 --format="%s" > expect && + git filter-branch -f --msg-filter "cat" && + git log -1 --format="%s" > actual && + test_cmp expect actual +' + test_expect_success 'Tag name filtering allows slashes in tag names' ' git tag -m tag-with-slash X/1 && git cat-file tag X/1 | sed -e s,X/1,X/2, > expect && @@ -319,6 +333,14 @@ test_expect_success 'prune empty collapsed merges' ' test_cmp expect actual ' +test_expect_success 'prune empty works even without index/tree filters' ' + git rev-list HEAD >expect && + git commit --allow-empty -m empty && + git filter-branch -f --prune-empty HEAD && + git rev-list HEAD >actual && + test_cmp expect actual +' + test_expect_success '--remap-to-ancestor with filename filters' ' git checkout master && git reset --hard A && @@ -373,7 +395,7 @@ test_expect_success 'setup submodule' ' git branch original HEAD ' -orig_head=`git show-ref --hash --head HEAD` +orig_head=$(git show-ref --hash --head HEAD) test_expect_success 'rewrite submodule with another content' ' git filter-branch --tree-filter "test -d submod && { @@ -382,7 +404,7 @@ test_expect_success 'rewrite submodule with another content' ' mkdir submod && : > submod/file } || :" HEAD && - test $orig_head != `git show-ref --hash --head HEAD` + test $orig_head != $(git show-ref --hash --head HEAD) ' test_expect_success 'replace submodule revision' ' @@ -391,7 +413,7 @@ test_expect_success 'replace submodule revision' ' "if git ls-files --error-unmatch -- submod > /dev/null 2>&1 then git update-index --cacheinfo 160000 0123456789012345678901234567890123456789 submod fi" HEAD && - test $orig_head != `git show-ref --hash --head HEAD` + test $orig_head != $(git show-ref --hash --head HEAD) ' test_expect_success 'filter commit message without trailing newline' ' @@ -404,4 +426,11 @@ test_expect_success 'filter commit message without trailing newline' ' test_cmp expect actual ' +test_expect_success 'tree-filter deals with object name vs pathname ambiguity' ' + test_when_finished "git reset --hard original" && + ambiguous=$(git rev-list -1 HEAD) && + git filter-branch --tree-filter "mv file.t $ambiguous" HEAD^.. && + git show HEAD:$ambiguous +' + test_done diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index d1ff5c94f2..1cfa8a21d2 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -23,8 +23,32 @@ test_expect_success 'listing all tags in an empty tree should succeed' ' ' test_expect_success 'listing all tags in an empty tree should output nothing' ' - test `git tag -l | wc -l` -eq 0 && - test `git tag | wc -l` -eq 0 + test $(git tag -l | wc -l) -eq 0 && + test $(git tag | wc -l) -eq 0 +' + +test_expect_success 'sort tags, ignore case' ' + ( + git init sort && + cd sort && + test_commit initial && + git tag tag-one && + git tag TAG-two && + git tag -l >actual && + cat >expected <<-\EOF && + TAG-two + initial + tag-one + EOF + test_cmp expected actual && + git tag -l -i >actual && + cat >expected <<-\EOF && + initial + tag-one + TAG-two + EOF + test_cmp expected actual + ) ' test_expect_success 'looking for a tag in an empty tree should fail' \ @@ -51,7 +75,19 @@ test_expect_success 'creating a tag using default HEAD should succeed' ' echo foo >foo && git add foo && git commit -m Foo && - git tag mytag + git tag mytag && + test_must_fail git reflog exists refs/tags/mytag +' + +test_expect_success 'creating a tag with --create-reflog should create reflog' ' + test_when_finished "git tag -d tag_with_reflog" && + git tag --create-reflog tag_with_reflog && + git reflog exists refs/tags/tag_with_reflog +' + +test_expect_success '--create-reflog does not create reflog on failure' ' + test_must_fail git tag --create-reflog mytag && + test_must_fail git reflog exists refs/tags/mytag ' test_expect_success 'listing all tags if one exists should succeed' ' @@ -60,8 +96,8 @@ test_expect_success 'listing all tags if one exists should succeed' ' ' test_expect_success 'listing all tags if one exists should output that tag' ' - test `git tag -l` = mytag && - test `git tag` = mytag + test $(git tag -l) = mytag && + test $(git tag) = mytag ' # pattern matching: @@ -69,9 +105,12 @@ test_expect_success 'listing all tags if one exists should output that tag' ' test_expect_success 'listing a tag using a matching pattern should succeed' \ 'git tag -l mytag' +test_expect_success 'listing a tag with --ignore-case' \ + 'test $(git tag -l --ignore-case MYTAG) = mytag' + test_expect_success \ 'listing a tag using a matching pattern should output that tag' \ - 'test `git tag -l mytag` = mytag' + 'test $(git tag -l mytag) = mytag' # todo: git tag -l now returns always zero, when fixed, change this test test_expect_success \ @@ -80,7 +119,7 @@ test_expect_success \ test_expect_success \ 'listing tags using a non-matching pattern should output nothing' \ - 'test `git tag -l xxx | wc -l` -eq 0' + 'test $(git tag -l xxx | wc -l) -eq 0' # special cases for creating tags: @@ -90,13 +129,13 @@ test_expect_success \ test_expect_success \ 'trying to create a tag with a non-valid name should fail' ' - test `git tag -l | wc -l` -eq 1 && + test $(git tag -l | wc -l) -eq 1 && test_must_fail git tag "" && test_must_fail git tag .othertag && test_must_fail git tag "other tag" && test_must_fail git tag "othertag^" && test_must_fail git tag "other~tag" && - test `git tag -l | wc -l` -eq 1 + test $(git tag -l | wc -l) -eq 1 ' test_expect_success 'creating a tag using HEAD directly should succeed' ' @@ -110,11 +149,11 @@ test_expect_success '--force can create a tag with the name of one existing' ' tag_exists mytag' test_expect_success '--force is moot with a non-existing tag name' ' + test_when_finished git tag -d newtag forcetag && git tag newtag >expect && git tag --force forcetag >actual && test_cmp expect actual ' -git tag -d newtag forcetag # deleting tags: @@ -285,11 +324,9 @@ EOF ' test_expect_success 'listing tags in column with column.*' ' - git config column.tag row && - git config column.ui dense && + test_config column.tag row && + test_config column.ui dense && COLUMNS=40 git tag -l >actual && - git config --unset column.ui && - git config --unset column.tag && cat >expected <<\EOF && a1 aa1 cba t210 t211 v0.2.1 v1.0 v1.0.1 v1.1.3 @@ -302,9 +339,8 @@ test_expect_success 'listing tag with -n --column should fail' ' ' test_expect_success 'listing tags -n in column with column.ui ignored' ' - git config column.ui "row dense" && + test_config column.ui "row dense" && COLUMNS=40 git tag -l -n >actual && - git config --unset column.ui && cat >expected <<\EOF && a1 Foo aa1 Foo @@ -763,6 +799,47 @@ test_expect_success GPG '-s implies annotated tag' ' test_cmp expect actual ' +get_tag_header forcesignannotated-implied-sign $commit commit $time >expect +echo "A message" >>expect +echo '-----BEGIN PGP SIGNATURE-----' >>expect +test_expect_success GPG \ + 'git tag -s implied if configured with tag.forcesignannotated' \ + 'test_config tag.forcesignannotated true && + git tag -m "A message" forcesignannotated-implied-sign && + get_tag_msg forcesignannotated-implied-sign >actual && + test_cmp expect actual +' + +test_expect_success GPG \ + 'lightweight with no message when configured with tag.forcesignannotated' \ + 'test_config tag.forcesignannotated true && + git tag forcesignannotated-lightweight && + tag_exists forcesignannotated-lightweight && + test_must_fail git tag -v forcesignannotated-no-message +' + +get_tag_header forcesignannotated-annotate $commit commit $time >expect +echo "A message" >>expect +test_expect_success GPG \ + 'git tag -a disable configured tag.forcesignannotated' \ + 'test_config tag.forcesignannotated true && + git tag -a -m "A message" forcesignannotated-annotate && + get_tag_msg forcesignannotated-annotate >actual && + test_cmp expect actual && + test_must_fail git tag -v forcesignannotated-annotate +' + +get_tag_header forcesignannotated-disabled $commit commit $time >expect +echo "A message" >>expect +echo '-----BEGIN PGP SIGNATURE-----' >>expect +test_expect_success GPG \ + 'git tag --sign enable GPG sign' \ + 'test_config tag.forcesignannotated false && + git tag --sign -m "A message" forcesignannotated-disabled && + get_tag_msg forcesignannotated-disabled >actual && + test_cmp expect actual +' + test_expect_success GPG \ 'trying to create a signed tag with non-existing -F file should fail' ' ! test -f nonexistingfile && @@ -1147,11 +1224,17 @@ test_expect_success GPG,RFC1991 \ ' # try to sign with bad user.signingkey -git config user.signingkey BobTheMouse test_expect_success GPG \ - 'git tag -s fails if gpg is misconfigured' \ - 'test_must_fail git tag -s -m tail tag-gpg-failure' -git config --unset user.signingkey + 'git tag -s fails if gpg is misconfigured (bad key)' \ + 'test_config user.signingkey BobTheMouse && + test_must_fail git tag -s -m tail tag-gpg-failure' + +# try to produce invalid signature +test_expect_success GPG \ + 'git tag -s fails if gpg is misconfigured (bad signature format)' \ + 'test_config gpg.program echo && + test_must_fail git tag -s -m tail tag-gpg-failure' + # try to verify without gpg: @@ -1424,7 +1507,7 @@ test_expect_success 'reverse lexical sort' ' ' test_expect_success 'configured lexical sort' ' - git config tag.sort "v:refname" && + test_config tag.sort "v:refname" && git tag -l "foo*" >actual && cat >expect <<-\EOF && foo1.3 @@ -1435,6 +1518,7 @@ test_expect_success 'configured lexical sort' ' ' test_expect_success 'option override configured sort' ' + test_config tag.sort "v:refname" && git tag -l --sort=-refname "foo*" >actual && cat >expect <<-\EOF && foo1.6 @@ -1449,19 +1533,12 @@ test_expect_success 'invalid sort parameter on command line' ' ' test_expect_success 'invalid sort parameter in configuratoin' ' - git config tag.sort "v:notvalid" && - git tag -l "foo*" >actual && - cat >expect <<-\EOF && - foo1.10 - foo1.3 - foo1.6 - EOF - test_cmp expect actual + test_config tag.sort "v:notvalid" && + test_must_fail git tag -l "foo*" ' test_expect_success 'version sort with prerelease reordering' ' - git config --unset tag.sort && - git config versionsort.prereleaseSuffix -rc && + test_config versionsort.prereleaseSuffix -rc && git tag foo1.6-rc1 && git tag foo1.6-rc2 && git tag -l --sort=version:refname "foo*" >actual && @@ -1476,6 +1553,7 @@ test_expect_success 'version sort with prerelease reordering' ' ' test_expect_success 'reverse version sort with prerelease reordering' ' + test_config versionsort.prereleaseSuffix -rc && git tag -l --sort=-version:refname "foo*" >actual && cat >expect <<-\EOF && foo1.10 @@ -1487,6 +1565,103 @@ test_expect_success 'reverse version sort with prerelease reordering' ' test_cmp expect actual ' +test_expect_success 'version sort with prerelease reordering and common leading character' ' + test_config versionsort.prereleaseSuffix -before && + git tag foo1.7-before1 && + git tag foo1.7 && + git tag foo1.7-after1 && + git tag -l --sort=version:refname "foo1.7*" >actual && + cat >expect <<-\EOF && + foo1.7-before1 + foo1.7 + foo1.7-after1 + EOF + test_cmp expect actual +' + +test_expect_success 'version sort with prerelease reordering, multiple suffixes and common leading character' ' + test_config versionsort.prereleaseSuffix -before && + git config --add versionsort.prereleaseSuffix -after && + git tag -l --sort=version:refname "foo1.7*" >actual && + cat >expect <<-\EOF && + foo1.7-before1 + foo1.7-after1 + foo1.7 + EOF + test_cmp expect actual +' + +test_expect_success 'version sort with prerelease reordering, multiple suffixes match the same tag' ' + test_config versionsort.prereleaseSuffix -bar && + git config --add versionsort.prereleaseSuffix -foo-baz && + git config --add versionsort.prereleaseSuffix -foo-bar && + git tag foo1.8-foo-bar && + git tag foo1.8-foo-baz && + git tag foo1.8 && + git tag -l --sort=version:refname "foo1.8*" >actual && + cat >expect <<-\EOF && + foo1.8-foo-baz + foo1.8-foo-bar + foo1.8 + EOF + test_cmp expect actual +' + +test_expect_success 'version sort with prerelease reordering, multiple suffixes match starting at the same position' ' + test_config versionsort.prereleaseSuffix -pre && + git config --add versionsort.prereleaseSuffix -prerelease && + git tag foo1.9-pre1 && + git tag foo1.9-pre2 && + git tag foo1.9-prerelease1 && + git tag -l --sort=version:refname "foo1.9*" >actual && + cat >expect <<-\EOF && + foo1.9-pre1 + foo1.9-pre2 + foo1.9-prerelease1 + EOF + test_cmp expect actual +' + +test_expect_success 'version sort with general suffix reordering' ' + test_config versionsort.suffix -alpha && + git config --add versionsort.suffix -beta && + git config --add versionsort.suffix "" && + git config --add versionsort.suffix -gamma && + git config --add versionsort.suffix -delta && + git tag foo1.10-alpha && + git tag foo1.10-beta && + git tag foo1.10-gamma && + git tag foo1.10-delta && + git tag foo1.10-unlisted-suffix && + git tag -l --sort=version:refname "foo1.10*" >actual && + cat >expect <<-\EOF && + foo1.10-alpha + foo1.10-beta + foo1.10 + foo1.10-unlisted-suffix + foo1.10-gamma + foo1.10-delta + EOF + test_cmp expect actual +' + +test_expect_success 'versionsort.suffix overrides versionsort.prereleaseSuffix' ' + test_config versionsort.suffix -before && + test_config versionsort.prereleaseSuffix -after && + git tag -l --sort=version:refname "foo1.7*" >actual && + cat >expect <<-\EOF && + foo1.7-before1 + foo1.7 + foo1.7-after1 + EOF + test_cmp expect actual +' + +test_expect_success 'version sort with very long prerelease suffix' ' + test_config versionsort.prereleaseSuffix -very-looooooooooooooooooooooooong-prerelease-suffix && + git tag -l --sort=version:refname +' + run_with_limited_stack () { (ulimit -s 128 && "$@") } @@ -1513,4 +1688,49 @@ EOF" test_cmp expect actual ' +test_expect_success '--format should list tags as per format given' ' + cat >expect <<-\EOF && + refname : refs/tags/v1.0 + refname : refs/tags/v1.0.1 + refname : refs/tags/v1.1.3 + EOF + git tag -l --format="refname : %(refname)" "v1*" >actual && + test_cmp expect actual +' + +test_expect_success 'setup --merged test tags' ' + git tag mergetest-1 HEAD~2 && + git tag mergetest-2 HEAD~1 && + git tag mergetest-3 HEAD +' + +test_expect_success '--merged cannot be used in non-list mode' ' + test_must_fail git tag --merged=mergetest-2 foo +' + +test_expect_success '--merged shows merged tags' ' + cat >expect <<-\EOF && + mergetest-1 + mergetest-2 + EOF + git tag -l --merged=mergetest-2 mergetest-* >actual && + test_cmp expect actual +' + +test_expect_success '--no-merged show unmerged tags' ' + cat >expect <<-\EOF && + mergetest-3 + EOF + git tag -l --no-merged=mergetest-2 mergetest-* >actual && + test_cmp expect actual +' + +test_expect_success 'ambiguous branch/tags not marked' ' + git tag ambiguous && + git branch ambiguous && + echo ambiguous >expect && + git tag -l ambiguous >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index 947b690fd7..c8dc665f2f 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -49,6 +49,19 @@ test_expect_success TTY 'LESS and LV envvars are set for pagination' ' grep ^LV= pager-env.out ' +test_expect_success !MINGW,TTY 'LESS and LV envvars set by git-sh-setup' ' + ( + sane_unset LESS LV && + PAGER="env >pager-env.out; wc" && + export PAGER && + PATH="$(git --exec-path):$PATH" && + export PATH && + test_terminal sh -c ". git-sh-setup && git_pager" + ) && + grep ^LESS= pager-env.out && + grep ^LV= pager-env.out +' + test_expect_success TTY 'some commands do not use a pager' ' rm -f paginated.out && test_terminal git rev-list HEAD && @@ -424,7 +437,7 @@ test_expect_success TTY 'command-specific pager works for external commands' ' echo "foo:initial" >expect && >actual && test_config pager.external "sed s/^/foo:/ >actual" && - test_terminal git --exec-path="`pwd`" external log --format=%s -1 && + test_terminal git --exec-path="$(pwd)" external log --format=%s -1 && test_cmp expect actual ' @@ -447,4 +460,13 @@ test_expect_success TTY 'external command pagers override sub-commands' ' test_cmp expect actual ' +test_expect_success 'command with underscores does not complain' ' + write_script git-under_score <<-\EOF && + echo ok + EOF + git --exec-path=. under_score >actual 2>&1 && + echo ok >expect && + test_cmp expect actual +' + test_done diff --git a/t/t7008-grep-binary.sh b/t/t7008-grep-binary.sh index b146406e9c..9c9c378119 100755 --- a/t/t7008-grep-binary.sh +++ b/t/t7008-grep-binary.sh @@ -141,7 +141,8 @@ test_expect_success 'grep respects not-binary diff attribute' ' test_cmp expect actual && echo "b diff" >.gitattributes && echo "b:binQary" >expect && - git grep bin b | nul_to_q >actual && + git grep bin b >actual.raw && + nul_to_q <actual.raw >actual && test_cmp expect actual ' diff --git a/t/t7011-skip-worktree-reading.sh b/t/t7011-skip-worktree-reading.sh index 88d60c1ce2..84f41451ec 100755 --- a/t/t7011-skip-worktree-reading.sh +++ b/t/t7011-skip-worktree-reading.sh @@ -23,17 +23,15 @@ S sub/1 H sub/2 EOF -NULL_SHA1=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 - setup_absent() { test -f 1 && rm 1 git update-index --remove 1 && - git update-index --add --cacheinfo 100644 $NULL_SHA1 1 && + git update-index --add --cacheinfo 100644 $EMPTY_BLOB 1 && git update-index --skip-worktree 1 } test_absent() { - echo "100644 $NULL_SHA1 0 1" > expected && + echo "100644 $EMPTY_BLOB 0 1" > expected && git ls-files --stage 1 > result && test_cmp expected result && test ! -f 1 @@ -42,12 +40,12 @@ test_absent() { setup_dirty() { git update-index --force-remove 1 && echo dirty > 1 && - git update-index --add --cacheinfo 100644 $NULL_SHA1 1 && + git update-index --add --cacheinfo 100644 $EMPTY_BLOB 1 && git update-index --skip-worktree 1 } test_dirty() { - echo "100644 $NULL_SHA1 0 1" > expected && + echo "100644 $EMPTY_BLOB 0 1" > expected && git ls-files --stage 1 > result && test_cmp expected result && echo dirty > expected @@ -120,7 +118,7 @@ test_expect_success 'grep with skip-worktree file' ' test "$(git grep --no-ext-grep test)" = "1:test" ' -echo ":000000 100644 $_z40 $NULL_SHA1 A 1" > expected +echo ":000000 100644 $_z40 $EMPTY_BLOB A 1" > expected test_expect_success 'diff-index does not examine skip-worktree absent entries' ' setup_absent && git diff-index HEAD -- 1 > result && diff --git a/t/t7012-skip-worktree-writing.sh b/t/t7012-skip-worktree-writing.sh index 9ceaa4049f..9d1abe50ef 100755 --- a/t/t7012-skip-worktree-writing.sh +++ b/t/t7012-skip-worktree-writing.sh @@ -53,17 +53,15 @@ test_expect_success 'read-tree removes worktree, dirty case' ' git update-index --no-skip-worktree added ' -NULL_SHA1=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 - setup_absent() { test -f 1 && rm 1 git update-index --remove 1 && - git update-index --add --cacheinfo 100644 $NULL_SHA1 1 && + git update-index --add --cacheinfo 100644 $EMPTY_BLOB 1 && git update-index --skip-worktree 1 } test_absent() { - echo "100644 $NULL_SHA1 0 1" > expected && + echo "100644 $EMPTY_BLOB 0 1" > expected && git ls-files --stage 1 > result && test_cmp expected result && test ! -f 1 @@ -72,12 +70,12 @@ test_absent() { setup_dirty() { git update-index --force-remove 1 && echo dirty > 1 && - git update-index --add --cacheinfo 100644 $NULL_SHA1 1 && + git update-index --add --cacheinfo 100644 $EMPTY_BLOB 1 && git update-index --skip-worktree 1 } test_dirty() { - echo "100644 $NULL_SHA1 0 1" > expected && + echo "100644 $EMPTY_BLOB 0 1" > expected && git ls-files --stage 1 > result && test_cmp expected result && echo dirty > expected diff --git a/t/t7030-verify-tag.sh b/t/t7030-verify-tag.sh new file mode 100755 index 0000000000..07079a41c4 --- /dev/null +++ b/t/t7030-verify-tag.sh @@ -0,0 +1,128 @@ +#!/bin/sh + +test_description='signed tag tests' +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-gpg.sh" + +test_expect_success GPG 'create signed tags' ' + echo 1 >file && git add file && + test_tick && git commit -m initial && + git tag -s -m initial initial && + git branch side && + + echo 2 >file && test_tick && git commit -a -m second && + git tag -s -m second second && + + git checkout side && + echo 3 >elif && git add elif && + test_tick && git commit -m "third on side" && + + git checkout master && + test_tick && git merge -S side && + git tag -s -m merge merge && + + echo 4 >file && test_tick && git commit -a -S -m "fourth unsigned" && + git tag -a -m fourth-unsigned fourth-unsigned && + + test_tick && git commit --amend -S -m "fourth signed" && + git tag -s -m fourth fourth-signed && + + echo 5 >file && test_tick && git commit -a -m "fifth" && + git tag fifth-unsigned && + + git config commit.gpgsign true && + echo 6 >file && test_tick && git commit -a -m "sixth" && + git tag -a -m sixth sixth-unsigned && + + test_tick && git rebase -f HEAD^^ && git tag -s -m 6th sixth-signed HEAD^ && + git tag -m seventh -s seventh-signed && + + echo 8 >file && test_tick && git commit -a -m eighth && + git tag -uB7227189 -m eighth eighth-signed-alt +' + +test_expect_success GPG 'verify and show signatures' ' + ( + for tag in initial second merge fourth-signed sixth-signed seventh-signed + do + git verify-tag $tag 2>actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo $tag OK || exit 1 + done + ) && + ( + for tag in fourth-unsigned fifth-unsigned sixth-unsigned + do + test_must_fail git verify-tag $tag 2>actual && + ! grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo $tag OK || exit 1 + done + ) && + ( + for tag in eighth-signed-alt + do + git verify-tag $tag 2>actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + grep "not certified" actual && + echo $tag OK || exit 1 + done + ) +' + +test_expect_success GPG 'detect fudged signature' ' + git cat-file tag seventh-signed >raw && + sed -e "s/seventh/7th forged/" raw >forged1 && + git hash-object -w -t tag forged1 >forged1.tag && + test_must_fail git verify-tag $(cat forged1.tag) 2>actual1 && + grep "BAD signature from" actual1 && + ! grep "Good signature from" actual1 +' + +test_expect_success GPG 'verify signatures with --raw' ' + ( + for tag in initial second merge fourth-signed sixth-signed seventh-signed + do + git verify-tag --raw $tag 2>actual && + grep "GOODSIG" actual && + ! grep "BADSIG" actual && + echo $tag OK || exit 1 + done + ) && + ( + for tag in fourth-unsigned fifth-unsigned sixth-unsigned + do + test_must_fail git verify-tag --raw $tag 2>actual && + ! grep "GOODSIG" actual && + ! grep "BADSIG" actual && + echo $tag OK || exit 1 + done + ) && + ( + for tag in eighth-signed-alt + do + git verify-tag --raw $tag 2>actual && + grep "GOODSIG" actual && + ! grep "BADSIG" actual && + grep "TRUST_UNDEFINED" actual && + echo $tag OK || exit 1 + done + ) +' + +test_expect_success GPG 'verify multiple tags' ' + tags="fourth-signed sixth-signed seventh-signed" && + for i in $tags + do + git verify-tag -v --raw $i || return 1 + done >expect.stdout 2>expect.stderr.1 && + grep "^.GNUPG:." <expect.stderr.1 >expect.stderr && + git verify-tag -v --raw $tags >actual.stdout 2>actual.stderr.1 && + grep "^.GNUPG:." <actual.stderr.1 >actual.stderr && + test_cmp expect.stdout actual.stdout && + test_cmp expect.stderr actual.stderr +' + +test_done diff --git a/t/t7060-wtstatus.sh b/t/t7060-wtstatus.sh index 741ec08576..53cf42fac1 100755 --- a/t/t7060-wtstatus.sh +++ b/t/t7060-wtstatus.sh @@ -34,6 +34,7 @@ test_expect_success 'M/D conflict does not segfault' ' On branch side You have unmerged paths. (fix conflicts and run "git commit") + (use "git merge --abort" to abort the merge) Unmerged paths: (use "git add/rm <file>..." as appropriate to mark resolution) @@ -106,7 +107,7 @@ test_expect_success 'git diff-index --cached -M shows 2 added + 1 unmerged' ' A THREE A TWO EOF - git diff-index --cached --name-status HEAD >actual && + git diff-index --cached -M --name-status HEAD >actual && test_cmp expected actual ' @@ -138,6 +139,7 @@ test_expect_success 'status when conflicts with add and rm advice (deleted by th On branch master You have unmerged paths. (fix conflicts and run "git commit") + (use "git merge --abort" to abort the merge) Unmerged paths: (use "git add/rm <file>..." as appropriate to mark resolution) @@ -171,6 +173,7 @@ test_expect_success 'status when conflicts with add and rm advice (both deleted) On branch conflict_second You have unmerged paths. (fix conflicts and run "git commit") + (use "git merge --abort" to abort the merge) Unmerged paths: (use "git add/rm <file>..." as appropriate to mark resolution) @@ -195,6 +198,7 @@ test_expect_success 'status when conflicts with only rm advice (both deleted)' ' On branch conflict_second You have unmerged paths. (fix conflicts and run "git commit") + (use "git merge --abort" to abort the merge) Changes to be committed: @@ -213,5 +217,40 @@ EOF git checkout master ' +test_expect_success 'status --branch with detached HEAD' ' + git reset --hard && + git checkout master^0 && + git status --branch --porcelain >actual && + cat >expected <<-EOF && + ## HEAD (no branch) + ?? .gitconfig + ?? actual + ?? expect + ?? expected + ?? mdconflict/ + EOF + test_i18ncmp expected actual +' + +## Duplicate the above test and verify --porcelain=v1 arg parsing. +test_expect_success 'status --porcelain=v1 --branch with detached HEAD' ' + git reset --hard && + git checkout master^0 && + git status --branch --porcelain=v1 >actual && + cat >expected <<-EOF && + ## HEAD (no branch) + ?? .gitconfig + ?? actual + ?? expect + ?? expected + ?? mdconflict/ + EOF + test_i18ncmp expected actual +' + +## Verify parser error on invalid --porcelain argument. +test_expect_success 'status --porcelain=bogus' ' + test_must_fail git status --porcelain=bogus +' test_done diff --git a/t/t7063-status-untracked-cache.sh b/t/t7063-status-untracked-cache.sh index bd4806c12a..0667bd9dd3 100755 --- a/t/t7063-status-untracked-cache.sh +++ b/t/t7063-status-untracked-cache.sh @@ -4,14 +4,26 @@ test_description='test untracked cache' . ./test-lib.sh +# On some filesystems (e.g. FreeBSD's ext2 and ufs) directory mtime +# is updated lazily after contents in the directory changes, which +# forces the untracked cache code to take the slow path. A test +# that wants to make sure that the fast path works correctly should +# call this helper to make mtime of the containing directory in sync +# with the reality before checking the fast path behaviour. +# +# See <20160803174522.5571-1-pclouds@gmail.com> if you want to know +# more. + +sync_mtime () { + find . -type d -ls >/dev/null +} + avoid_racy() { sleep 1 } -# It's fine if git update-index returns an error code other than one, -# it'll be caught in the first test. test_lazy_prereq UNTRACKED_CACHE ' - { git update-index --untracked-cache; ret=$?; } && + { git update-index --test-untracked-cache; ret=$?; } && test $ret -ne 1 ' @@ -20,6 +32,10 @@ if ! test_have_prereq UNTRACKED_CACHE; then test_done fi +test_expect_success 'core.untrackedCache is unset' ' + test_must_fail git config --get core.untrackedCache +' + test_expect_success 'setup' ' git init worktree && cd worktree && @@ -32,13 +48,13 @@ test_expect_success 'setup' ' test_expect_success 'untracked cache is empty' ' test-dump-untracked-cache >../actual && - cat >../expect <<EOF && + cat >../expect-empty <<EOF && info/exclude 0000000000000000000000000000000000000000 core.excludesfile 0000000000000000000000000000000000000000 exclude_per_dir .gitignore flags 00000006 EOF - test_cmp ../expect ../actual + test_cmp ../expect-empty ../actual ' cat >../status.expect <<EOF && @@ -51,7 +67,7 @@ A two EOF cat >../dump.expect <<EOF && -info/exclude e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +info/exclude $EMPTY_BLOB core.excludesfile 0000000000000000000000000000000000000000 exclude_per_dir .gitignore flags 00000006 @@ -135,7 +151,7 @@ EOF test_expect_success 'verify untracked cache dump' ' test-dump-untracked-cache >../actual && cat >../expect <<EOF && -info/exclude e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +info/exclude $EMPTY_BLOB core.excludesfile 0000000000000000000000000000000000000000 exclude_per_dir .gitignore flags 00000006 @@ -182,7 +198,7 @@ EOF test_expect_success 'verify untracked cache dump' ' test-dump-untracked-cache >../actual && cat >../expect <<EOF && -info/exclude e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +info/exclude $EMPTY_BLOB core.excludesfile 0000000000000000000000000000000000000000 exclude_per_dir .gitignore flags 00000006 @@ -354,4 +370,295 @@ EOF test_cmp ../expect ../actual ' +test_expect_success 'set up for sparse checkout testing' ' + echo two >done/.gitignore && + echo three >>done/.gitignore && + echo two >done/two && + git add -f done/two done/.gitignore && + git commit -m "first commit" +' + +test_expect_success 'status after commit' ' + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../actual && + cat >../status.expect <<EOF && +?? .gitignore +?? dtwo/ +EOF + test_cmp ../status.expect ../actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 0 +directory invalidation: 0 +opendir: 2 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'untracked cache correct after commit' ' + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ e6fcc8f2ee31bae321d66afd183fcb7237afae6e recurse valid +.gitignore +dtwo/ +/done/ 0000000000000000000000000000000000000000 recurse valid +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect ../actual +' + +test_expect_success 'set up sparse checkout' ' + echo "done/[a-z]*" >.git/info/sparse-checkout && + test_config core.sparsecheckout true && + git checkout master && + git update-index --force-untracked-cache && + git status --porcelain >/dev/null && # prime the cache + test_path_is_missing done/.gitignore && + test_path_is_file done/one +' + +test_expect_success 'create/modify files, some of which are gitignored' ' + echo two bis >done/two && + echo three >done/three && # three is gitignored + echo four >done/four && # four is gitignored at a higher level + echo five >done/five && # five is not gitignored + echo test >base && #we need to ensure that the root dir is touched + rm base && + sync_mtime +' + +test_expect_success 'test sparse status with untracked cache' ' + : >../trace && + avoid_racy && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../status.actual && + cat >../status.expect <<EOF && + M done/two +?? .gitignore +?? done/five +?? dtwo/ +EOF + test_cmp ../status.expect ../status.actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 1 +directory invalidation: 2 +opendir: 2 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'untracked cache correct after status' ' + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ e6fcc8f2ee31bae321d66afd183fcb7237afae6e recurse valid +.gitignore +dtwo/ +/done/ 1946f0437f90c5005533cbe1736a6451ca301714 recurse valid +five +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect ../actual +' + +test_expect_success 'test sparse status again with untracked cache' ' + avoid_racy && + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../status.actual && + cat >../status.expect <<EOF && + M done/two +?? .gitignore +?? done/five +?? dtwo/ +EOF + test_cmp ../status.expect ../status.actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 0 +directory invalidation: 0 +opendir: 0 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'set up for test of subdir and sparse checkouts' ' + mkdir done/sub && + mkdir done/sub/sub && + echo "sub" > done/sub/sub/file +' + +test_expect_success 'test sparse status with untracked cache and subdir' ' + avoid_racy && + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../status.actual && + cat >../status.expect <<EOF && + M done/two +?? .gitignore +?? done/five +?? done/sub/ +?? dtwo/ +EOF + test_cmp ../status.expect ../status.actual && + cat >../trace.expect <<EOF && +node creation: 2 +gitignore invalidation: 0 +directory invalidation: 1 +opendir: 3 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'verify untracked cache dump (sparse/subdirs)' ' + test-dump-untracked-cache >../actual && + cat >../expect-from-test-dump <<EOF && +info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ e6fcc8f2ee31bae321d66afd183fcb7237afae6e recurse valid +.gitignore +dtwo/ +/done/ 1946f0437f90c5005533cbe1736a6451ca301714 recurse valid +five +sub/ +/done/sub/ 0000000000000000000000000000000000000000 recurse check_only valid +sub/ +/done/sub/sub/ 0000000000000000000000000000000000000000 recurse check_only valid +file +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect-from-test-dump ../actual +' + +test_expect_success 'test sparse status again with untracked cache and subdir' ' + avoid_racy && + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../status.actual && + test_cmp ../status.expect ../status.actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 0 +directory invalidation: 0 +opendir: 0 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'move entry in subdir from untracked to cached' ' + git add dtwo/two && + git status --porcelain >../status.actual && + cat >../status.expect <<EOF && + M done/two +A dtwo/two +?? .gitignore +?? done/five +?? done/sub/ +EOF + test_cmp ../status.expect ../status.actual +' + +test_expect_success 'move entry in subdir from cached to untracked' ' + git rm --cached dtwo/two && + git status --porcelain >../status.actual && + cat >../status.expect <<EOF && + M done/two +?? .gitignore +?? done/five +?? done/sub/ +?? dtwo/ +EOF + test_cmp ../status.expect ../status.actual +' + +test_expect_success '--no-untracked-cache removes the cache' ' + git update-index --no-untracked-cache && + test-dump-untracked-cache >../actual && + echo "no untracked cache" >../expect-no-uc && + test_cmp ../expect-no-uc ../actual +' + +test_expect_success 'git status does not change anything' ' + git status && + test-dump-untracked-cache >../actual && + test_cmp ../expect-no-uc ../actual +' + +test_expect_success 'setting core.untrackedCache to true and using git status creates the cache' ' + git config core.untrackedCache true && + test-dump-untracked-cache >../actual && + test_cmp ../expect-no-uc ../actual && + git status && + test-dump-untracked-cache >../actual && + test_cmp ../expect-from-test-dump ../actual +' + +test_expect_success 'using --no-untracked-cache does not fail when core.untrackedCache is true' ' + git update-index --no-untracked-cache && + test-dump-untracked-cache >../actual && + test_cmp ../expect-no-uc ../actual && + git update-index --untracked-cache && + test-dump-untracked-cache >../actual && + test_cmp ../expect-empty ../actual +' + +test_expect_success 'setting core.untrackedCache to false and using git status removes the cache' ' + git config core.untrackedCache false && + test-dump-untracked-cache >../actual && + test_cmp ../expect-empty ../actual && + git status && + test-dump-untracked-cache >../actual && + test_cmp ../expect-no-uc ../actual +' + +test_expect_success 'using --untracked-cache does not fail when core.untrackedCache is false' ' + git update-index --untracked-cache && + test-dump-untracked-cache >../actual && + test_cmp ../expect-empty ../actual +' + +test_expect_success 'setting core.untrackedCache to keep' ' + git config core.untrackedCache keep && + git update-index --untracked-cache && + test-dump-untracked-cache >../actual && + test_cmp ../expect-empty ../actual && + git status && + test-dump-untracked-cache >../actual && + test_cmp ../expect-from-test-dump ../actual && + git update-index --no-untracked-cache && + test-dump-untracked-cache >../actual && + test_cmp ../expect-no-uc ../actual && + git update-index --force-untracked-cache && + test-dump-untracked-cache >../actual && + test_cmp ../expect-empty ../actual && + git status && + test-dump-untracked-cache >../actual && + test_cmp ../expect-from-test-dump ../actual +' + +test_expect_success 'test ident field is working' ' + mkdir ../other_worktree && + cp -R done dthree dtwo four three ../other_worktree && + GIT_WORK_TREE=../other_worktree git status 2>../err && + echo "warning: Untracked cache is disabled on this system or location." >../expect && + test_i18ncmp ../expect ../err +' + test_done diff --git a/t/t7064-wtstatus-pv2.sh b/t/t7064-wtstatus-pv2.sh new file mode 100755 index 0000000000..e319fa2e84 --- /dev/null +++ b/t/t7064-wtstatus-pv2.sh @@ -0,0 +1,593 @@ +#!/bin/sh + +test_description='git status --porcelain=v2 + +This test exercises porcelain V2 output for git status.' + + +. ./test-lib.sh + + +test_expect_success setup ' + test_tick && + git config core.autocrlf false && + echo x >file_x && + echo y >file_y && + echo z >file_z && + mkdir dir1 && + echo a >dir1/file_a && + echo b >dir1/file_b +' + +test_expect_success 'before initial commit, nothing added, only untracked' ' + cat >expect <<-EOF && + # branch.oid (initial) + # branch.head master + ? actual + ? dir1/ + ? expect + ? file_x + ? file_y + ? file_z + EOF + + git status --porcelain=v2 --branch --untracked-files=normal >actual && + test_cmp expect actual +' + +test_expect_success 'before initial commit, things added' ' + git add file_x file_y file_z dir1 && + OID_A=$(git hash-object -t blob -- dir1/file_a) && + OID_B=$(git hash-object -t blob -- dir1/file_b) && + OID_X=$(git hash-object -t blob -- file_x) && + OID_Y=$(git hash-object -t blob -- file_y) && + OID_Z=$(git hash-object -t blob -- file_z) && + + cat >expect <<-EOF && + # branch.oid (initial) + # branch.head master + 1 A. N... 000000 100644 100644 $_z40 $OID_A dir1/file_a + 1 A. N... 000000 100644 100644 $_z40 $OID_B dir1/file_b + 1 A. N... 000000 100644 100644 $_z40 $OID_X file_x + 1 A. N... 000000 100644 100644 $_z40 $OID_Y file_y + 1 A. N... 000000 100644 100644 $_z40 $OID_Z file_z + ? actual + ? expect + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'before initial commit, things added (-z)' ' + lf_to_nul >expect <<-EOF && + # branch.oid (initial) + # branch.head master + 1 A. N... 000000 100644 100644 $_z40 $OID_A dir1/file_a + 1 A. N... 000000 100644 100644 $_z40 $OID_B dir1/file_b + 1 A. N... 000000 100644 100644 $_z40 $OID_X file_x + 1 A. N... 000000 100644 100644 $_z40 $OID_Y file_y + 1 A. N... 000000 100644 100644 $_z40 $OID_Z file_z + ? actual + ? expect + EOF + + git status -z --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'make first commit, comfirm HEAD oid and branch' ' + git commit -m initial && + H0=$(git rev-parse HEAD) && + cat >expect <<-EOF && + # branch.oid $H0 + # branch.head master + ? actual + ? expect + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'after first commit, create unstaged changes' ' + echo x >>file_x && + OID_X1=$(git hash-object -t blob -- file_x) && + rm file_z && + H0=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $H0 + # branch.head master + 1 .M N... 100644 100644 100644 $OID_X $OID_X file_x + 1 .D N... 100644 100644 000000 $OID_Z $OID_Z file_z + ? actual + ? expect + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'after first commit but omit untracked files and branch' ' + cat >expect <<-EOF && + 1 .M N... 100644 100644 100644 $OID_X $OID_X file_x + 1 .D N... 100644 100644 000000 $OID_Z $OID_Z file_z + EOF + + git status --porcelain=v2 --untracked-files=no >actual && + test_cmp expect actual +' + +test_expect_success 'after first commit, stage existing changes' ' + git add file_x && + git rm file_z && + H0=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $H0 + # branch.head master + 1 M. N... 100644 100644 100644 $OID_X $OID_X1 file_x + 1 D. N... 100644 000000 000000 $OID_Z $_z40 file_z + ? actual + ? expect + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'rename causes 2 path lines' ' + git mv file_y renamed_y && + H0=$(git rev-parse HEAD) && + + q_to_tab >expect <<-EOF && + # branch.oid $H0 + # branch.head master + 1 M. N... 100644 100644 100644 $OID_X $OID_X1 file_x + 1 D. N... 100644 000000 000000 $OID_Z $_z40 file_z + 2 R. N... 100644 100644 100644 $OID_Y $OID_Y R100 renamed_yQfile_y + ? actual + ? expect + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'rename causes 2 path lines (-z)' ' + H0=$(git rev-parse HEAD) && + + ## Lines use NUL path separator and line terminator, so double transform here. + q_to_nul <<-EOF | lf_to_nul >expect && + # branch.oid $H0 + # branch.head master + 1 M. N... 100644 100644 100644 $OID_X $OID_X1 file_x + 1 D. N... 100644 000000 000000 $OID_Z $_z40 file_z + 2 R. N... 100644 100644 100644 $OID_Y $OID_Y R100 renamed_yQfile_y + ? actual + ? expect + EOF + + git status --porcelain=v2 --branch --untracked-files=all -z >actual && + test_cmp expect actual +' + +test_expect_success 'make second commit, confirm clean and new HEAD oid' ' + git commit -m second && + H1=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $H1 + # branch.head master + ? actual + ? expect + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'confirm ignored files are not printed' ' + test_when_finished "rm -f x.ign .gitignore" && + echo x.ign >.gitignore && + echo "ignore me" >x.ign && + + cat >expect <<-EOF && + ? .gitignore + ? actual + ? expect + EOF + + git status --porcelain=v2 --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'ignored files are printed with --ignored' ' + test_when_finished "rm -f x.ign .gitignore" && + echo x.ign >.gitignore && + echo "ignore me" >x.ign && + + cat >expect <<-EOF && + ? .gitignore + ? actual + ? expect + ! x.ign + EOF + + git status --porcelain=v2 --ignored --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'create and commit permanent ignore file' ' + cat >.gitignore <<-EOF && + actual* + expect* + EOF + + git add .gitignore && + git commit -m ignore_trash && + H1=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $H1 + # branch.head master + EOF + + git status --porcelain=v2 --branch >actual && + test_cmp expect actual +' + +test_expect_success 'verify --intent-to-add output' ' + test_when_finished "git rm -f intent1.add intent2.add" && + touch intent1.add && + echo test >intent2.add && + + git add --intent-to-add intent1.add intent2.add && + + cat >expect <<-EOF && + 1 .A N... 000000 000000 100644 $_z40 $_z40 intent1.add + 1 .A N... 000000 000000 100644 $_z40 $_z40 intent2.add + EOF + + git status --porcelain=v2 >actual && + test_cmp expect actual +' + +test_expect_success 'verify AA (add-add) conflict' ' + test_when_finished "git reset --hard" && + + git branch AA_A master && + git checkout AA_A && + echo "Branch AA_A" >conflict.txt && + OID_AA_A=$(git hash-object -t blob -- conflict.txt) && + git add conflict.txt && + git commit -m "branch aa_a" && + + git branch AA_B master && + git checkout AA_B && + echo "Branch AA_B" >conflict.txt && + OID_AA_B=$(git hash-object -t blob -- conflict.txt) && + git add conflict.txt && + git commit -m "branch aa_b" && + + git branch AA_M AA_B && + git checkout AA_M && + test_must_fail git merge AA_A && + + HM=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $HM + # branch.head AA_M + u AA N... 000000 100644 100644 100644 $_z40 $OID_AA_B $OID_AA_A conflict.txt + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'verify UU (edit-edit) conflict' ' + test_when_finished "git reset --hard" && + + git branch UU_ANC master && + git checkout UU_ANC && + echo "Ancestor" >conflict.txt && + OID_UU_ANC=$(git hash-object -t blob -- conflict.txt) && + git add conflict.txt && + git commit -m "UU_ANC" && + + git branch UU_A UU_ANC && + git checkout UU_A && + echo "Branch UU_A" >conflict.txt && + OID_UU_A=$(git hash-object -t blob -- conflict.txt) && + git add conflict.txt && + git commit -m "branch uu_a" && + + git branch UU_B UU_ANC && + git checkout UU_B && + echo "Branch UU_B" >conflict.txt && + OID_UU_B=$(git hash-object -t blob -- conflict.txt) && + git add conflict.txt && + git commit -m "branch uu_b" && + + git branch UU_M UU_B && + git checkout UU_M && + test_must_fail git merge UU_A && + + HM=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $HM + # branch.head UU_M + u UU N... 100644 100644 100644 100644 $OID_UU_ANC $OID_UU_B $OID_UU_A conflict.txt + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual +' + +test_expect_success 'verify upstream fields in branch header' ' + git checkout master && + test_when_finished "rm -rf sub_repo" && + git clone . sub_repo && + ( + ## Confirm local master tracks remote master. + cd sub_repo && + HUF=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + ## Test ahead/behind. + echo xyz >file_xyz && + git add file_xyz && + git commit -m xyz && + + HUF=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +1 -0 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + ## Repeat the above but without --branch. + cat >expect <<-EOF && + EOF + + git status --porcelain=v2 --untracked-files=all >actual && + test_cmp expect actual && + + ## Test upstream-gone case. Fake this by pointing origin/master at + ## a non-existing commit. + OLD=$(git rev-parse origin/master) && + NEW=$_z40 && + mv .git/packed-refs .git/old-packed-refs && + sed "s/$OLD/$NEW/g" <.git/old-packed-refs >.git/packed-refs && + + HUF=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + +test_expect_success 'create and add submodule, submodule appears clean (A. S...)' ' + git checkout master && + git clone . sub_repo && + git clone . super_repo && + ( cd super_repo && + git submodule add ../sub_repo sub1 && + + ## Confirm stage/add of clean submodule. + HMOD=$(git hash-object -t blob -- .gitmodules) && + HSUP=$(git rev-parse HEAD) && + HSUB=$HSUP && + + cat >expect <<-EOF && + # branch.oid $HSUP + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules + 1 A. S... 000000 160000 160000 $_z40 $HSUB sub1 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + +test_expect_success 'untracked changes in added submodule (AM S..U)' ' + ( cd super_repo && + ## create untracked file in the submodule. + ( cd sub1 && + echo "xxxx" >file_in_sub + ) && + + HMOD=$(git hash-object -t blob -- .gitmodules) && + HSUP=$(git rev-parse HEAD) && + HSUB=$HSUP && + + cat >expect <<-EOF && + # branch.oid $HSUP + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules + 1 AM S..U 000000 160000 160000 $_z40 $HSUB sub1 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + +test_expect_success 'staged changes in added submodule (AM S.M.)' ' + ( cd super_repo && + ## stage the changes in the submodule. + ( cd sub1 && + git add file_in_sub + ) && + + HMOD=$(git hash-object -t blob -- .gitmodules) && + HSUP=$(git rev-parse HEAD) && + HSUB=$HSUP && + + cat >expect <<-EOF && + # branch.oid $HSUP + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules + 1 AM S.M. 000000 160000 160000 $_z40 $HSUB sub1 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + +test_expect_success 'staged and unstaged changes in added (AM S.M.)' ' + ( cd super_repo && + ( cd sub1 && + ## make additional unstaged changes (on the same file) in the submodule. + ## This does not cause us to get S.MU (because the submodule does not report + ## a "?" line for the unstaged changes). + echo "more changes" >>file_in_sub + ) && + + HMOD=$(git hash-object -t blob -- .gitmodules) && + HSUP=$(git rev-parse HEAD) && + HSUB=$HSUP && + + cat >expect <<-EOF && + # branch.oid $HSUP + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules + 1 AM S.M. 000000 160000 160000 $_z40 $HSUB sub1 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + +test_expect_success 'staged and untracked changes in added submodule (AM S.MU)' ' + ( cd super_repo && + ( cd sub1 && + ## stage new changes in tracked file. + git add file_in_sub && + ## create new untracked file. + echo "yyyy" >>another_file_in_sub + ) && + + HMOD=$(git hash-object -t blob -- .gitmodules) && + HSUP=$(git rev-parse HEAD) && + HSUB=$HSUP && + + cat >expect <<-EOF && + # branch.oid $HSUP + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules + 1 AM S.MU 000000 160000 160000 $_z40 $HSUB sub1 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + +test_expect_success 'commit within the submodule appears as new commit in super (AM SC..)' ' + ( cd super_repo && + ( cd sub1 && + ## Make a new commit in the submodule. + git add file_in_sub && + rm -f another_file_in_sub && + git commit -m "new commit" + ) && + + HMOD=$(git hash-object -t blob -- .gitmodules) && + HSUP=$(git rev-parse HEAD) && + HSUB=$HSUP && + + cat >expect <<-EOF && + # branch.oid $HSUP + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules + 1 AM SC.. 000000 160000 160000 $_z40 $HSUB sub1 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + +test_expect_success 'stage submodule in super and commit' ' + ( cd super_repo && + ## Stage the new submodule commit in the super. + git add sub1 && + ## Commit the super so that the sub no longer appears as added. + git commit -m "super commit" && + + HSUP=$(git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $HSUP + # branch.head master + # branch.upstream origin/master + # branch.ab +1 -0 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + +test_expect_success 'make unstaged changes in existing submodule (.M S.M.)' ' + ( cd super_repo && + ( cd sub1 && + echo "zzzz" >>file_in_sub + ) && + + HSUP=$(git rev-parse HEAD) && + HSUB=$(cd sub1 && git rev-parse HEAD) && + + cat >expect <<-EOF && + # branch.oid $HSUP + # branch.head master + # branch.upstream origin/master + # branch.ab +1 -0 + 1 .M S.M. 160000 160000 160000 $HSUB $HSUB sub1 + EOF + + git status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t7102-reset.sh b/t/t7102-reset.sh index 98bcfe21aa..86f23be34a 100755 --- a/t/t7102-reset.sh +++ b/t/t7102-reset.sh @@ -66,14 +66,14 @@ test_expect_success 'reset --hard message' ' hex=$(git log -1 --format="%h") && git reset --hard > .actual && echo HEAD is now at $hex $(commit_msg) > .expected && - test_cmp .expected .actual + test_i18ncmp .expected .actual ' test_expect_success 'reset --hard message (ISO8859-1 logoutputencoding)' ' hex=$(git log -1 --format="%h") && git -c "i18n.logOutputEncoding=$test_encoding" reset --hard > .actual && echo HEAD is now at $hex $(commit_msg $test_encoding) > .expected && - test_cmp .expected .actual + test_i18ncmp .expected .actual ' >.diff_expect diff --git a/t/t7103-reset-bare.sh b/t/t7103-reset-bare.sh index 1eef93c2b2..afe36a533c 100755 --- a/t/t7103-reset-bare.sh +++ b/t/t7103-reset-bare.sh @@ -63,7 +63,7 @@ test_expect_success '"mixed" reset is not allowed in bare' ' test_expect_success '"soft" reset is allowed in bare' ' git reset --soft HEAD^ && - test "`git show --pretty=format:%s | head -n 1`" = "one" + test "$(git show --pretty=format:%s | head -n 1)" = "one" ' test_done diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 885923610a..d4b217b0ee 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -257,7 +257,7 @@ test_expect_success 'checkout to detach HEAD' ' git checkout -f renamer && git clean -f && git checkout renamer^ 2>messages && test_i18ngrep "HEAD is now at 7329388" messages && - test_line_count -gt 1 messages && + (test_line_count -gt 1 messages || test -n "$GETTEXT_POISON") && H=$(git rev-parse --verify HEAD) && M=$(git show-ref -s --verify refs/heads/master) && test "z$H" = "z$M" && diff --git a/t/t7300-clean.sh b/t/t7300-clean.sh index 99be5d95d0..b89fd2a6ad 100755 --- a/t/t7300-clean.sh +++ b/t/t7300-clean.sh @@ -432,9 +432,7 @@ test_expect_success 'nested git work tree' ' ( cd foo && git init && - >hello.world - git add . && - git commit -a -m nested + test_commit nested hello.world ) && ( cd bar && @@ -443,9 +441,7 @@ test_expect_success 'nested git work tree' ' ( cd baz/boo && git init && - >deeper.world - git add . && - git commit -a -m deeply.nested + test_commit deeply.nested deeper.world ) && git clean -f -d && test -f foo/.git/index && @@ -455,15 +451,153 @@ test_expect_success 'nested git work tree' ' ! test -d bar ' +test_expect_success 'should clean things that almost look like git but are not' ' + rm -fr almost_git almost_bare_git almost_submodule && + mkdir -p almost_git/.git/objects && + mkdir -p almost_git/.git/refs && + cat >almost_git/.git/HEAD <<-\EOF && + garbage + EOF + cp -r almost_git/.git/ almost_bare_git && + mkdir almost_submodule/ && + cat >almost_submodule/.git <<-\EOF && + garbage + EOF + test_when_finished "rm -rf almost_*" && + git clean -f -d && + test_path_is_missing almost_git && + test_path_is_missing almost_bare_git && + test_path_is_missing almost_submodule +' + +test_expect_success 'should not clean submodules' ' + rm -fr repo to_clean sub1 sub2 && + mkdir repo to_clean && + ( + cd repo && + git init && + test_commit msg hello.world + ) && + git submodule add ./repo/.git sub1 && + git commit -m "sub1" && + git branch before_sub2 && + git submodule add ./repo/.git sub2 && + git commit -m "sub2" && + git checkout before_sub2 && + >to_clean/should_clean.this && + git clean -f -d && + test_path_is_file repo/.git/index && + test_path_is_file repo/hello.world && + test_path_is_file sub1/.git && + test_path_is_file sub1/hello.world && + test_path_is_file sub2/.git && + test_path_is_file sub2/hello.world && + test_path_is_missing to_clean +' + +test_expect_success POSIXPERM,SANITY 'should avoid cleaning possible submodules' ' + rm -fr to_clean possible_sub1 && + mkdir to_clean possible_sub1 && + test_when_finished "rm -rf possible_sub*" && + echo "gitdir: foo" >possible_sub1/.git && + >possible_sub1/hello.world && + chmod 0 possible_sub1/.git && + >to_clean/should_clean.this && + git clean -f -d && + test_path_is_file possible_sub1/.git && + test_path_is_file possible_sub1/hello.world && + test_path_is_missing to_clean +' + +test_expect_success 'nested (empty) git should be kept' ' + rm -fr empty_repo to_clean && + git init empty_repo && + mkdir to_clean && + >to_clean/should_clean.this && + git clean -f -d && + test_path_is_file empty_repo/.git/HEAD && + test_path_is_missing to_clean +' + +test_expect_success 'nested bare repositories should be cleaned' ' + rm -fr bare1 bare2 subdir && + git init --bare bare1 && + git clone --local --bare . bare2 && + mkdir subdir && + cp -r bare2 subdir/bare3 && + git clean -f -d && + test_path_is_missing bare1 && + test_path_is_missing bare2 && + test_path_is_missing subdir +' + +test_expect_failure 'nested (empty) bare repositories should be cleaned even when in .git' ' + rm -fr strange_bare && + mkdir strange_bare && + git init --bare strange_bare/.git && + git clean -f -d && + test_path_is_missing strange_bare +' + +test_expect_failure 'nested (non-empty) bare repositories should be cleaned even when in .git' ' + rm -fr strange_bare && + mkdir strange_bare && + git clone --local --bare . strange_bare/.git && + git clean -f -d && + test_path_is_missing strange_bare +' + +test_expect_success 'giving path in nested git work tree will remove it' ' + rm -fr repo && + mkdir repo && + ( + cd repo && + git init && + mkdir -p bar/baz && + test_commit msg bar/baz/hello.world + ) && + git clean -f -d repo/bar/baz && + test_path_is_file repo/.git/HEAD && + test_path_is_dir repo/bar/ && + test_path_is_missing repo/bar/baz +' + +test_expect_success 'giving path to nested .git will not remove it' ' + rm -fr repo && + mkdir repo untracked && + ( + cd repo && + git init && + test_commit msg hello.world + ) && + git clean -f -d repo/.git && + test_path_is_file repo/.git/HEAD && + test_path_is_dir repo/.git/refs && + test_path_is_dir repo/.git/objects && + test_path_is_dir untracked/ +' + +test_expect_success 'giving path to nested .git/ will remove contents' ' + rm -fr repo untracked && + mkdir repo untracked && + ( + cd repo && + git init && + test_commit msg hello.world + ) && + git clean -f -d repo/.git/ && + test_path_is_dir repo/.git && + test_dir_is_empty repo/.git && + test_path_is_dir untracked/ +' + test_expect_success 'force removal of nested git work tree' ' rm -fr foo bar baz && mkdir -p foo bar baz/boo && ( cd foo && git init && - >hello.world - git add . && - git commit -a -m nested + test_commit nested hello.world ) && ( cd bar && @@ -472,9 +606,7 @@ test_expect_success 'force removal of nested git work tree' ' ( cd baz/boo && git init && - >deeper.world - git add . && - git commit -a -m deeply.nested + test_commit deeply.nested deeper.world ) && git clean -f -f -d && ! test -d foo && diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index 540771ca41..b77cce8e40 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -11,6 +11,10 @@ subcommands of git submodule. . ./test-lib.sh +test_expect_success 'submodule deinit works on empty repository' ' + git submodule deinit --all +' + test_expect_success 'setup - initial commit' ' >t && git add t && @@ -18,6 +22,22 @@ test_expect_success 'setup - initial commit' ' git branch initial ' +test_expect_success 'submodule init aborts on missing .gitmodules file' ' + test_when_finished "git update-index --remove sub" && + git update-index --add --cacheinfo 160000,$(git rev-parse HEAD),sub && + # missing the .gitmodules file here + test_must_fail git submodule init 2>actual && + test_i18ngrep "No url found for submodule path" actual +' + +test_expect_success 'submodule update aborts on missing .gitmodules file' ' + test_when_finished "git update-index --remove sub" && + git update-index --add --cacheinfo 160000,$(git rev-parse HEAD),sub && + # missing the .gitmodules file here + git submodule update sub 2>actual && + test_i18ngrep "Submodule path .sub. not initialized" actual +' + test_expect_success 'configuration parsing' ' test_when_finished "rm -f .gitmodules" && cat >.gitmodules <<-\EOF && @@ -462,7 +482,7 @@ test_expect_success 'update --init' ' git config --remove-section submodule.example && test_must_fail git config submodule.example.url && - git submodule update init > update.out && + git submodule update init 2> update.out && cat update.out && test_i18ngrep "not initialized" update.out && test_must_fail git rev-parse --resolve-git-dir init/.git && @@ -480,7 +500,7 @@ test_expect_success 'update --init from subdirectory' ' mkdir -p sub && ( cd sub && - git submodule update ../init >update.out && + git submodule update ../init 2>update.out && cat update.out && test_i18ngrep "not initialized" update.out && test_must_fail git rev-parse --resolve-git-dir ../init/.git && @@ -818,6 +838,47 @@ test_expect_success 'submodule add --name allows to replace a submodule with ano ) ' +test_expect_success 'recursive relative submodules stay relative' ' + test_when_finished "rm -rf super clone2 subsub sub3" && + mkdir subsub && + ( + cd subsub && + git init && + >t && + git add t && + git commit -m "initial commit" + ) && + mkdir sub3 && + ( + cd sub3 && + git init && + >t && + git add t && + git commit -m "initial commit" && + git submodule add ../subsub dirdir/subsub && + git commit -m "add submodule subsub" + ) && + mkdir super && + ( + cd super && + git init && + >t && + git add t && + git commit -m "initial commit" && + git submodule add ../sub3 && + git commit -m "add submodule sub" + ) && + git clone super clone2 && + ( + cd clone2 && + git submodule update --init --recursive && + echo "gitdir: ../.git/modules/sub3" >./sub3/.git_expect && + echo "gitdir: ../../../.git/modules/sub3/modules/dirdir/subsub" >./sub3/dirdir/subsub/.git_expect + ) && + test_cmp clone2/sub3/.git_expect clone2/sub3/.git && + test_cmp clone2/sub3/dirdir/subsub/.git_expect clone2/sub3/dirdir/subsub/.git +' + test_expect_success 'submodule add with an existing name fails unless forced' ' ( cd addtest2 && @@ -849,6 +910,20 @@ test_expect_success 'set up a second submodule' ' git commit -m "submodule example2 added" ' +test_expect_success 'submodule deinit works on repository without submodules' ' + test_when_finished "rm -rf newdirectory" && + mkdir newdirectory && + ( + cd newdirectory && + git init && + >file && + git add file && + git commit -m "repo should not be empty" && + git submodule deinit . && + git submodule deinit --all + ) +' + test_expect_success 'submodule deinit should remove the whole submodule section from .git/config' ' git config submodule.example.foo bar && git config submodule.example2.frotz nitfol && @@ -867,7 +942,7 @@ test_expect_success 'submodule deinit from subdirectory' ' cd sub && git submodule deinit ../init >../output ) && - grep "\\.\\./init" output && + test_i18ngrep "\\.\\./init" output && test -z "$(git config --get-regexp "submodule\.example\.")" && test -n "$(git config --get-regexp "submodule\.example2\.")" && test -f example2/.git && @@ -887,6 +962,19 @@ test_expect_success 'submodule deinit . deinits all initialized submodules' ' rmdir init example2 ' +test_expect_success 'submodule deinit --all deinits all initialized submodules' ' + git submodule update --init && + git config submodule.example.foo bar && + git config submodule.example2.frotz nitfol && + test_must_fail git submodule deinit && + git submodule deinit --all >actual && + test -z "$(git config --get-regexp "submodule\.example\.")" && + test -z "$(git config --get-regexp "submodule\.example2\.")" && + test_i18ngrep "Cleared directory .init" actual && + test_i18ngrep "Cleared directory .example2" actual && + rmdir init example2 +' + test_expect_success 'submodule deinit deinits a submodule when its work tree is missing or empty' ' git submodule update --init && rm -rf init example2/* example2/.git && @@ -953,6 +1041,10 @@ test_expect_success 'submodule deinit is silent when used on an uninitialized su test_i18ngrep ! "Submodule .example. (.*) unregistered for path .init" actual && test_i18ngrep ! "Submodule .example2. (.*) unregistered for path .example2" actual && test_i18ngrep "Cleared directory .init" actual && + git submodule deinit --all >actual && + test_i18ngrep ! "Submodule .example. (.*) unregistered for path .init" actual && + test_i18ngrep ! "Submodule .example2. (.*) unregistered for path .example2" actual && + test_i18ngrep "Cleared directory .init" actual && rmdir init example2 ' @@ -999,5 +1091,30 @@ test_expect_success 'submodule add clone shallow submodule' ' ) ' +test_expect_success 'submodule helper list is not confused by common prefixes' ' + mkdir -p dir1/b && + ( + cd dir1/b && + git init && + echo hi >testfile2 && + git add . && + git commit -m "test1" + ) && + mkdir -p dir2/b && + ( + cd dir2/b && + git init && + echo hello >testfile1 && + git add . && + git commit -m "test2" + ) && + git submodule add /dir1/b dir1/b && + git submodule add /dir2/b dir2/b && + git commit -m "first submodule commit" && + git submodule--helper list dir1/b |cut -c51- >actual && + echo "dir1/b" >expect && + test_cmp expect actual +' + test_done diff --git a/t/t7403-submodule-sync.sh b/t/t7403-submodule-sync.sh index 79bc135bf6..0726799e74 100755 --- a/t/t7403-submodule-sync.sh +++ b/t/t7403-submodule-sync.sh @@ -62,13 +62,13 @@ test_expect_success 'change submodule' ' ' reset_submodule_urls () { - local root - root=$(pwd) && ( + root=$(pwd) && cd super-clone/submodule && git config remote.origin.url "$root/submodule" ) && ( + root=$(pwd) && cd super-clone/submodule/sub-submodule && git config remote.origin.url "$root/submodule" ) @@ -157,7 +157,7 @@ test_expect_success '"git submodule sync" should update submodule URLs - subdire cd sub && git submodule sync >../../output ) && - grep "\\.\\./submodule" output && + test_i18ngrep "\\.\\./submodule" output && test -d "$( cd super-clone/submodule && git config remote.origin.url @@ -188,7 +188,7 @@ test_expect_success '"git submodule sync --recursive" should update all submodul cd sub && git submodule sync --recursive >../../output ) && - grep "\\.\\./submodule/sub-submodule" output && + test_i18ngrep "\\.\\./submodule/sub-submodule" output && test -d "$( cd super-clone/submodule && git config remote.origin.url diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index dda3929d99..725bbed1f8 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -14,8 +14,8 @@ submodule and "git submodule update --rebase/--merge" does not detach the HEAD. compare_head() { - sha_master=`git rev-list --max-count=1 master` - sha_head=`git rev-list --max-count=1 HEAD` + sha_master=$(git rev-list --max-count=1 master) + sha_head=$(git rev-list --max-count=1 HEAD) test "$sha_master" = "$sha_head" } @@ -63,6 +63,10 @@ test_expect_success 'setup a submodule tree' ' git submodule add ../none none && test_tick && git commit -m "none" + ) && + git clone . recursivesuper && + ( cd recursivesuper + git submodule add ../super super ) ' @@ -95,6 +99,64 @@ test_expect_success 'submodule update from subdirectory' ' ) ' +supersha1=$(git -C super rev-parse HEAD) +mergingsha1=$(git -C super/merging rev-parse HEAD) +nonesha1=$(git -C super/none rev-parse HEAD) +rebasingsha1=$(git -C super/rebasing rev-parse HEAD) +submodulesha1=$(git -C super/submodule rev-parse HEAD) +pwd=$(pwd) + +cat <<EOF >expect +Submodule path '../super': checked out '$supersha1' +Submodule path '../super/merging': checked out '$mergingsha1' +Submodule path '../super/none': checked out '$nonesha1' +Submodule path '../super/rebasing': checked out '$rebasingsha1' +Submodule path '../super/submodule': checked out '$submodulesha1' +EOF + +cat <<EOF >expect2 +Submodule 'merging' ($pwd/merging) registered for path '../super/merging' +Submodule 'none' ($pwd/none) registered for path '../super/none' +Submodule 'rebasing' ($pwd/rebasing) registered for path '../super/rebasing' +Submodule 'submodule' ($pwd/submodule) registered for path '../super/submodule' +Cloning into '$pwd/recursivesuper/super/merging'... +done. +Cloning into '$pwd/recursivesuper/super/none'... +done. +Cloning into '$pwd/recursivesuper/super/rebasing'... +done. +Cloning into '$pwd/recursivesuper/super/submodule'... +done. +EOF + +test_expect_success 'submodule update --init --recursive from subdirectory' ' + git -C recursivesuper/super reset --hard HEAD^ && + (cd recursivesuper && + mkdir tmp && + cd tmp && + git submodule update --init --recursive ../super >../../actual 2>../../actual2 + ) && + test_i18ncmp expect actual && + test_i18ncmp expect2 actual2 +' + +cat <<EOF >expect2 +Submodule 'foo/sub' ($pwd/withsubs/../rebasing) registered for path 'sub' +EOF + +test_expect_success 'submodule update --init from and of subdirectory' ' + git init withsubs && + (cd withsubs && + mkdir foo && + git submodule add "$(pwd)/../rebasing" foo/sub && + (cd foo && + git submodule deinit -f sub && + git submodule update --init sub 2>../../actual2 + ) + ) && + test_i18ncmp expect2 actual2 +' + apos="'"; test_expect_success 'submodule update does not fetch already present commits' ' (cd submodule && @@ -164,9 +226,42 @@ test_expect_success 'submodule update --remote should fetch upstream changes' ' ) ' +test_expect_success 'submodule update --remote should fetch upstream changes with .' ' + ( + cd super && + git config -f .gitmodules submodule."submodule".branch "." && + git add .gitmodules && + git commit -m "submodules: update from the respective superproject branch" + ) && + ( + cd submodule && + echo line4a >> file && + git add file && + test_tick && + git commit -m "upstream line4a" && + git checkout -b test-branch && + test_commit on-test-branch + ) && + ( + cd super && + git submodule update --remote --force submodule && + git -C submodule log -1 --oneline >actual + git -C ../submodule log -1 --oneline master >expect + test_cmp expect actual && + git checkout -b test-branch && + git submodule update --remote --force submodule && + git -C submodule log -1 --oneline >actual + git -C ../submodule log -1 --oneline test-branch >expect + test_cmp expect actual && + git checkout master && + git branch -d test-branch && + git reset --hard HEAD^ + ) +' + test_expect_success 'local config should override .gitmodules branch' ' (cd submodule && - git checkout -b test-branch && + git checkout test-branch && echo line5 >> file && git add file && test_tick && @@ -311,16 +406,59 @@ test_expect_success 'submodule update - command in .git/config' ' ) ' +cat << EOF >expect +Execution of 'false $submodulesha1' failed in submodule path 'submodule' +EOF + test_expect_success 'submodule update - command in .git/config catches failure' ' (cd super && git config submodule.submodule.update "!false" ) && (cd super/submodule && - git reset --hard HEAD^ + git reset --hard $submodulesha1^ ) && (cd super && - test_must_fail git submodule update submodule - ) + test_must_fail git submodule update submodule 2>../actual + ) && + test_i18ncmp actual expect +' + +cat << EOF >expect +Execution of 'false $submodulesha1' failed in submodule path '../submodule' +EOF + +test_expect_success 'submodule update - command in .git/config catches failure -- subdirectory' ' + (cd super && + git config submodule.submodule.update "!false" + ) && + (cd super/submodule && + git reset --hard $submodulesha1^ + ) && + (cd super && + mkdir tmp && cd tmp && + test_must_fail git submodule update ../submodule 2>../../actual + ) && + test_i18ncmp actual expect +' + +cat << EOF >expect +Execution of 'false $submodulesha1' failed in submodule path '../super/submodule' +Failed to recurse into submodule path '../super' +EOF + +test_expect_success 'recursive submodule update - command in .git/config catches failure -- subdirectory' ' + (cd recursivesuper && + git submodule update --remote super && + git add super && + git commit -m "update to latest to have more than one commit in submodules" + ) && + git -C recursivesuper/super config submodule.submodule.update "!false" && + git -C recursivesuper/super/submodule reset --hard $submodulesha1^ && + (cd recursivesuper && + mkdir -p tmp && cd tmp && + test_must_fail git submodule update --recursive ../super 2>../../actual + ) && + test_i18ncmp actual expect ' test_expect_success 'submodule init does not copy command into .git/config' ' @@ -753,16 +891,35 @@ test_expect_success SYMLINKS 'submodule update can handle symbolic links in pwd' ' test_expect_success 'submodule update clone shallow submodule' ' + test_when_finished "rm -rf super3" && + first=$(git -C cloned submodule status submodule |cut -c2-41) && + second=$(git -C submodule rev-parse HEAD) && + commit_count=$(git -C submodule rev-list --count $first^..$second) && git clone cloned super3 && pwd=$(pwd) && - (cd super3 && - sed -e "s#url = ../#url = file://$pwd/#" <.gitmodules >.gitmodules.tmp && - mv -f .gitmodules.tmp .gitmodules && - git submodule update --init --depth=3 - (cd submodule && - test 1 = $(git log --oneline | wc -l) - ) -) + ( + cd super3 && + sed -e "s#url = ../#url = file://$pwd/#" <.gitmodules >.gitmodules.tmp && + mv -f .gitmodules.tmp .gitmodules && + git submodule update --init --depth=$commit_count && + test 1 = $(git -C submodule log --oneline | wc -l) + ) +' + +test_expect_success 'submodule update clone shallow submodule outside of depth' ' + test_when_finished "rm -rf super3" && + git clone cloned super3 && + pwd=$(pwd) && + ( + cd super3 && + sed -e "s#url = ../#url = file://$pwd/#" <.gitmodules >.gitmodules.tmp && + mv -f .gitmodules.tmp .gitmodules && + test_must_fail git submodule update --init --depth=1 2>actual && + test_i18ngrep "Direct fetching of that commit failed." actual && + git -C ../submodule config uploadpack.allowReachableSHA1InWant true && + git submodule update --init --depth=1 >actual && + test 1 = $(git -C submodule log --oneline | wc -l) + ) ' test_expect_success 'submodule update --recursive drops module name before recursing' ' @@ -774,4 +931,31 @@ test_expect_success 'submodule update --recursive drops module name before recur test_i18ngrep "Submodule path .deeper/submodule/subsubmodule.: checked out" actual ) ' + +test_expect_success 'submodule update can be run in parallel' ' + (cd super2 && + GIT_TRACE=$(pwd)/trace.out git submodule update --jobs 7 && + grep "7 tasks" trace.out && + git config submodule.fetchJobs 8 && + GIT_TRACE=$(pwd)/trace.out git submodule update && + grep "8 tasks" trace.out && + GIT_TRACE=$(pwd)/trace.out git submodule update --jobs 9 && + grep "9 tasks" trace.out + ) +' + +test_expect_success 'git clone passes the parallel jobs config on to submodules' ' + test_when_finished "rm -rf super4" && + GIT_TRACE=$(pwd)/trace.out git clone --recurse-submodules --jobs 7 . super4 && + grep "7 tasks" trace.out && + rm -rf super4 && + git config --global submodule.fetchJobs 8 && + GIT_TRACE=$(pwd)/trace.out git clone --recurse-submodules . super4 && + grep "8 tasks" trace.out && + rm -rf super4 && + GIT_TRACE=$(pwd)/trace.out git clone --recurse-submodules --jobs 9 . super4 && + grep "9 tasks" trace.out && + rm -rf super4 +' + test_done diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh index 7ca10b8606..6ba5daf42e 100755 --- a/t/t7407-submodule-foreach.sh +++ b/t/t7407-submodule-foreach.sh @@ -178,6 +178,26 @@ test_expect_success 'test messages from "foreach --recursive"' ' ' cat > expect <<EOF +Entering '../nested1' +Entering '../nested1/nested2' +Entering '../nested1/nested2/nested3' +Entering '../nested1/nested2/nested3/submodule' +Entering '../sub1' +Entering '../sub2' +Entering '../sub3' +EOF + +test_expect_success 'test messages from "foreach --recursive" from subdirectory' ' + ( + cd clone2 && + mkdir untracked && + cd untracked && + git submodule foreach --recursive >../../actual + ) && + test_i18ncmp expect actual +' + +cat > expect <<EOF nested1-nested1 nested2-nested2 nested3-nested3 @@ -242,8 +262,12 @@ test_expect_success 'test "status --recursive"' ' test_cmp expect actual ' -sed -e "/nested2 /s/.*/+$nested2sha1 nested1\/nested2 (file2~1)/;/sub[1-3]/d" < expect > expect2 -mv -f expect2 expect +cat > expect <<EOF + $nested1sha1 nested1 (heads/master) ++$nested2sha1 nested1/nested2 (file2~1) + $nested3sha1 nested1/nested2/nested3 (heads/master) + $submodulesha1 nested1/nested2/nested3/submodule (heads/master) +EOF test_expect_success 'ensure "status --cached --recursive" preserves the --cached flag' ' ( @@ -257,6 +281,27 @@ test_expect_success 'ensure "status --cached --recursive" preserves the --cached test_cmp expect actual ' +nested2sha1=$(git -C clone3/nested1/nested2 rev-parse HEAD) + +cat > expect <<EOF + $nested1sha1 ../nested1 (heads/master) ++$nested2sha1 ../nested1/nested2 (file2) + $nested3sha1 ../nested1/nested2/nested3 (heads/master) + $submodulesha1 ../nested1/nested2/nested3/submodule (heads/master) + $sub1sha1 ../sub1 ($sub1sha1_short) + $sub2sha1 ../sub2 ($sub2sha1_short) + $sub3sha1 ../sub3 (heads/master) +EOF + +test_expect_success 'test "status --recursive" from sub directory' ' + ( + cd clone3 && + mkdir tmp && cd tmp && + git submodule status --recursive > ../../actual + ) && + test_cmp expect actual +' + test_expect_success 'use "git clone --recursive" to checkout all submodules' ' git clone --recursive super clone4 && ( diff --git a/t/t7408-submodule-reference.sh b/t/t7408-submodule-reference.sh index b770b2f04d..e159fc5035 100755 --- a/t/t7408-submodule-reference.sh +++ b/t/t7408-submodule-reference.sh @@ -6,76 +6,189 @@ test_description='test clone --reference' . ./test-lib.sh -base_dir=`pwd` - -U=$base_dir/UPLOAD_LOG - -test_expect_success 'preparing first repository' \ -'test_create_repo A && cd A && -echo first > file1 && -git add file1 && -git commit -m A-initial' - -cd "$base_dir" - -test_expect_success 'preparing second repository' \ -'git clone A B && cd B && -echo second > file2 && -git add file2 && -git commit -m B-addition && -git repack -a -d && -git prune' - -cd "$base_dir" - -test_expect_success 'preparing superproject' \ -'test_create_repo super && cd super && -echo file > file && -git add file && -git commit -m B-super-initial' - -cd "$base_dir" - -test_expect_success 'submodule add --reference' \ -'cd super && git submodule add --reference ../B "file://$base_dir/A" sub && -git commit -m B-super-added' - -cd "$base_dir" - -test_expect_success 'after add: existence of info/alternates' \ -'test_line_count = 1 super/.git/modules/sub/objects/info/alternates' - -cd "$base_dir" - -test_expect_success 'that reference gets used with add' \ -'cd super/sub && -echo "0 objects, 0 kilobytes" > expected && -git count-objects > current && -diff expected current' - -cd "$base_dir" - -test_expect_success 'cloning superproject' \ -'git clone super super-clone' - -cd "$base_dir" - -test_expect_success 'update with reference' \ -'cd super-clone && git submodule update --init --reference ../B' - -cd "$base_dir" - -test_expect_success 'after update: existence of info/alternates' \ -'test_line_count = 1 super-clone/.git/modules/sub/objects/info/alternates' - -cd "$base_dir" - -test_expect_success 'that reference gets used with update' \ -'cd super-clone/sub && -echo "0 objects, 0 kilobytes" > expected && -git count-objects > current && -diff expected current' - -cd "$base_dir" +base_dir=$(pwd) + +test_alternate_is_used () { + alternates_file="$1" && + working_dir="$2" && + test_line_count = 1 "$alternates_file" && + echo "0 objects, 0 kilobytes" >expect && + git -C "$working_dir" count-objects >actual && + test_cmp expect actual +} + +test_expect_success 'preparing first repository' ' + test_create_repo A && + ( + cd A && + echo first >file1 && + git add file1 && + git commit -m A-initial + ) +' + +test_expect_success 'preparing second repository' ' + git clone A B && + ( + cd B && + echo second >file2 && + git add file2 && + git commit -m B-addition && + git repack -a -d && + git prune + ) +' + +test_expect_success 'preparing superproject' ' + test_create_repo super && + ( + cd super && + echo file >file && + git add file && + git commit -m B-super-initial + ) +' + +test_expect_success 'submodule add --reference uses alternates' ' + ( + cd super && + git submodule add --reference ../B "file://$base_dir/A" sub && + git commit -m B-super-added && + git repack -ad + ) && + test_alternate_is_used super/.git/modules/sub/objects/info/alternates super/sub +' + +test_expect_success 'that reference gets used with add' ' + ( + cd super/sub && + echo "0 objects, 0 kilobytes" >expected && + git count-objects >current && + diff expected current + ) +' + +# The tests up to this point, and repositories created by them +# (A, B, super and super/sub), are about setting up the stage +# for subsequent tests and meant to be kept throughout the +# remainder of the test. +# Tests from here on, if they create their own test repository, +# are expected to clean after themselves. + +test_expect_success 'updating superproject keeps alternates' ' + test_when_finished "rm -rf super-clone" && + git clone super super-clone && + git -C super-clone submodule update --init --reference ../B && + test_alternate_is_used super-clone/.git/modules/sub/objects/info/alternates super-clone/sub +' + +test_expect_success 'submodules use alternates when cloning a superproject' ' + test_when_finished "rm -rf super-clone" && + git clone --reference super --recursive super super-clone && + ( + cd super-clone && + # test superproject has alternates setup correctly + test_alternate_is_used .git/objects/info/alternates . && + # test submodule has correct setup + test_alternate_is_used .git/modules/sub/objects/info/alternates sub + ) +' + +test_expect_success 'missing submodule alternate fails clone and submodule update' ' + test_when_finished "rm -rf super-clone" && + git clone super super2 && + test_must_fail git clone --recursive --reference super2 super2 super-clone && + ( + cd super-clone && + # test superproject has alternates setup correctly + test_alternate_is_used .git/objects/info/alternates . && + # update of the submodule succeeds + test_must_fail git submodule update --init && + # and we have no alternates: + test_must_fail test_alternate_is_used .git/modules/sub/objects/info/alternates sub && + test_must_fail test_path_is_file sub/file1 + ) +' + +test_expect_success 'ignoring missing submodule alternates passes clone and submodule update' ' + test_when_finished "rm -rf super-clone" && + git clone --reference-if-able super2 --recursive super2 super-clone && + ( + cd super-clone && + # test superproject has alternates setup correctly + test_alternate_is_used .git/objects/info/alternates . && + # update of the submodule succeeds + git submodule update --init && + # and we have no alternates: + test_must_fail test_alternate_is_used .git/modules/sub/objects/info/alternates sub && + test_path_is_file sub/file1 + ) +' + +test_expect_success 'preparing second superproject with a nested submodule plus partial clone' ' + test_create_repo supersuper && + ( + cd supersuper && + echo "I am super super." >file && + git add file && + git commit -m B-super-super-initial + git submodule add "file://$base_dir/super" subwithsub && + git commit -m B-super-super-added && + git submodule update --init --recursive && + git repack -ad + ) && + git clone supersuper supersuper2 && + ( + cd supersuper2 && + git submodule update --init + ) +' + +# At this point there are three root-level positories: A, B, super and super2 + +test_expect_success 'nested submodule alternate in works and is actually used' ' + test_when_finished "rm -rf supersuper-clone" && + git clone --recursive --reference supersuper supersuper supersuper-clone && + ( + cd supersuper-clone && + # test superproject has alternates setup correctly + test_alternate_is_used .git/objects/info/alternates . && + # immediate submodule has alternate: + test_alternate_is_used .git/modules/subwithsub/objects/info/alternates subwithsub && + # nested submodule also has alternate: + test_alternate_is_used .git/modules/subwithsub/modules/sub/objects/info/alternates subwithsub/sub + ) +' + +check_that_two_of_three_alternates_are_used() { + test_alternate_is_used .git/objects/info/alternates . && + # immediate submodule has alternate: + test_alternate_is_used .git/modules/subwithsub/objects/info/alternates subwithsub && + # but nested submodule has no alternate: + test_must_fail test_alternate_is_used .git/modules/subwithsub/modules/sub/objects/info/alternates subwithsub/sub +} + + +test_expect_success 'missing nested submodule alternate fails clone and submodule update' ' + test_when_finished "rm -rf supersuper-clone" && + test_must_fail git clone --recursive --reference supersuper2 supersuper2 supersuper-clone && + ( + cd supersuper-clone && + check_that_two_of_three_alternates_are_used && + # update of the submodule fails + test_must_fail git submodule update --init --recursive + ) +' + +test_expect_success 'missing nested submodule alternate in --reference-if-able mode' ' + test_when_finished "rm -rf supersuper-clone" && + git clone --recursive --reference-if-able supersuper2 supersuper2 supersuper-clone && + ( + cd supersuper-clone && + check_that_two_of_three_alternates_are_used && + # update of the submodule succeeds + git submodule update --init --recursive + ) +' test_done diff --git a/t/t7409-submodule-detached-worktree.sh b/t/t7409-submodule-detached-work-tree.sh index c20717181e..c20717181e 100755 --- a/t/t7409-submodule-detached-worktree.sh +++ b/t/t7409-submodule-detached-work-tree.sh diff --git a/t/t7410-submodule-checkout-to.sh b/t/t7410-submodule-checkout-to.sh index 8f30aed6cc..1acef32647 100755 --- a/t/t7410-submodule-checkout-to.sh +++ b/t/t7410-submodule-checkout-to.sh @@ -33,7 +33,7 @@ rev1_hash_sub=$(git --git-dir=origin/sub/.git show --pretty=format:%h -q "HEAD~1 test_expect_success 'checkout main' \ 'mkdir default_checkout && (cd clone/main && - git checkout --to "$base_path/default_checkout/main" "$rev1_hash_main")' + git worktree add "$base_path/default_checkout/main" "$rev1_hash_main")' test_expect_failure 'can see submodule diffs just after checkout' \ '(cd default_checkout/main && git diff --submodule master"^!" | grep "file1 updated")' @@ -41,10 +41,20 @@ test_expect_failure 'can see submodule diffs just after checkout' \ test_expect_success 'checkout main and initialize independed clones' \ 'mkdir fully_cloned_submodule && (cd clone/main && - git checkout --to "$base_path/fully_cloned_submodule/main" "$rev1_hash_main") && + git worktree add "$base_path/fully_cloned_submodule/main" "$rev1_hash_main") && (cd fully_cloned_submodule/main && git submodule update)' test_expect_success 'can see submodule diffs after independed cloning' \ '(cd fully_cloned_submodule/main && git diff --submodule master"^!" | grep "file1 updated")' +test_expect_success 'checkout sub manually' \ + 'mkdir linked_submodule && + (cd clone/main && + git worktree add "$base_path/linked_submodule/main" "$rev1_hash_main") && + (cd clone/main/sub && + git worktree add "$base_path/linked_submodule/main/sub" "$rev1_hash_sub")' + +test_expect_success 'can see submodule diffs after manual checkout of linked submodule' \ + '(cd linked_submodule/main && git diff --submodule master"^!" | grep "file1 updated")' + test_done diff --git a/t/t7411-submodule-config.sh b/t/t7411-submodule-config.sh new file mode 100755 index 0000000000..eea36f1dbe --- /dev/null +++ b/t/t7411-submodule-config.sh @@ -0,0 +1,199 @@ +#!/bin/sh +# +# Copyright (c) 2014 Heiko Voigt +# + +test_description='Test submodules config cache infrastructure + +This test verifies that parsing .gitmodules configurations directly +from the database and from the worktree works. +' + +TEST_NO_CREATE_REPO=1 +. ./test-lib.sh + +test_expect_success 'submodule config cache setup' ' + mkdir submodule && + (cd submodule && + git init && + echo a >a && + git add . && + git commit -ma + ) && + mkdir super && + (cd super && + git init && + git submodule add ../submodule && + git submodule add ../submodule a && + git commit -m "add as submodule and as a" && + git mv a b && + git commit -m "move a to b" + ) +' + +cat >super/expect <<EOF +Submodule name: 'a' for path 'a' +Submodule name: 'a' for path 'b' +Submodule name: 'submodule' for path 'submodule' +Submodule name: 'submodule' for path 'submodule' +EOF + +test_expect_success 'test parsing and lookup of submodule config by path' ' + (cd super && + test-submodule-config \ + HEAD^ a \ + HEAD b \ + HEAD^ submodule \ + HEAD submodule \ + >actual && + test_cmp expect actual + ) +' + +test_expect_success 'test parsing and lookup of submodule config by name' ' + (cd super && + test-submodule-config --name \ + HEAD^ a \ + HEAD a \ + HEAD^ submodule \ + HEAD submodule \ + >actual && + test_cmp expect actual + ) +' + +cat >super/expect_error <<EOF +Submodule name: 'a' for path 'b' +Submodule name: 'submodule' for path 'submodule' +EOF + +test_expect_success 'error in one submodule config lets continue' ' + (cd super && + cp .gitmodules .gitmodules.bak && + echo " value = \"" >>.gitmodules && + git add .gitmodules && + mv .gitmodules.bak .gitmodules && + git commit -m "add error" && + test-submodule-config \ + HEAD b \ + HEAD submodule \ + >actual && + test_cmp expect_error actual + ) +' + +test_expect_success 'error message contains blob reference' ' + (cd super && + sha1=$(git rev-parse HEAD) && + test-submodule-config \ + HEAD b \ + HEAD submodule \ + 2>actual_err && + test_i18ngrep "submodule-blob $sha1:.gitmodules" actual_err >/dev/null + ) +' + +test_expect_success 'using different treeishs works' ' + ( + cd super && + git tag new_tag && + tree=$(git rev-parse HEAD^{tree}) && + commit=$(git rev-parse HEAD^{commit}) && + test-submodule-config $commit b >expect && + test-submodule-config $tree b >actual.1 && + test-submodule-config new_tag b >actual.2 && + test_cmp expect actual.1 && + test_cmp expect actual.2 + ) +' + +cat >super/expect_url <<EOF +Submodule url: 'git@somewhere.else.net:a.git' for path 'b' +Submodule url: 'git@somewhere.else.net:submodule.git' for path 'submodule' +EOF + +cat >super/expect_local_path <<EOF +Submodule name: 'a' for path 'c' +Submodule name: 'submodule' for path 'submodule' +EOF + +test_expect_success 'reading of local configuration' ' + (cd super && + old_a=$(git config submodule.a.url) && + old_submodule=$(git config submodule.submodule.url) && + git config submodule.a.url git@somewhere.else.net:a.git && + git config submodule.submodule.url git@somewhere.else.net:submodule.git && + test-submodule-config --url \ + "" b \ + "" submodule \ + >actual && + test_cmp expect_url actual && + git config submodule.a.path c && + test-submodule-config \ + "" c \ + "" submodule \ + >actual && + test_cmp expect_local_path actual && + git config submodule.a.url "$old_a" && + git config submodule.submodule.url "$old_submodule" && + git config --unset submodule.a.path c + ) +' + +cat >super/expect_url <<EOF +Submodule url: '../submodule' for path 'b' +Submodule url: 'git@somewhere.else.net:submodule.git' for path 'submodule' +EOF + +test_expect_success 'reading of local configuration for uninitialized submodules' ' + ( + cd super && + git submodule deinit -f b && + old_submodule=$(git config submodule.submodule.url) && + git config submodule.submodule.url git@somewhere.else.net:submodule.git && + test-submodule-config --url \ + "" b \ + "" submodule \ + >actual && + test_cmp expect_url actual && + git config submodule.submodule.url "$old_submodule" && + git submodule init b + ) +' + +cat >super/expect_fetchrecurse_die.err <<EOF +fatal: bad submodule.submodule.fetchrecursesubmodules argument: blabla +EOF + +test_expect_success 'local error in fetchrecursesubmodule dies early' ' + (cd super && + git config submodule.submodule.fetchrecursesubmodules blabla && + test_must_fail test-submodule-config \ + "" b \ + "" submodule \ + >actual.out 2>actual.err && + touch expect_fetchrecurse_die.out && + test_cmp expect_fetchrecurse_die.out actual.out && + test_cmp expect_fetchrecurse_die.err actual.err && + git config --unset submodule.submodule.fetchrecursesubmodules + ) +' + +test_expect_success 'error in history in fetchrecursesubmodule lets continue' ' + (cd super && + git config -f .gitmodules \ + submodule.submodule.fetchrecursesubmodules blabla && + git add .gitmodules && + git config --unset -f .gitmodules \ + submodule.submodule.fetchrecursesubmodules && + git commit -m "add error in fetchrecursesubmodules" && + test-submodule-config \ + HEAD b \ + HEAD submodule \ + >actual && + test_cmp expect_error actual && + git reset --hard HEAD^ + ) +' + +test_done diff --git a/t/t7412-submodule-absorbgitdirs.sh b/t/t7412-submodule-absorbgitdirs.sh new file mode 100755 index 0000000000..1c47780e2b --- /dev/null +++ b/t/t7412-submodule-absorbgitdirs.sh @@ -0,0 +1,101 @@ +#!/bin/sh + +test_description='Test submodule absorbgitdirs + +This test verifies that `git submodue absorbgitdirs` moves a submodules git +directory into the superproject. +' + +. ./test-lib.sh + +test_expect_success 'setup a real submodule' ' + git init sub1 && + test_commit -C sub1 first && + git submodule add ./sub1 && + test_tick && + git commit -m superproject +' + +test_expect_success 'absorb the git dir' ' + >expect.1 && + >expect.2 && + >actual.1 && + >actual.2 && + git status >expect.1 && + git -C sub1 rev-parse HEAD >expect.2 && + git submodule absorbgitdirs && + git fsck && + test -f sub1/.git && + test -d .git/modules/sub1 && + git status >actual.1 && + git -C sub1 rev-parse HEAD >actual.2 && + test_cmp expect.1 actual.1 && + test_cmp expect.2 actual.2 +' + +test_expect_success 'absorbing does not fail for deinitalized submodules' ' + test_when_finished "git submodule update --init" && + git submodule deinit --all && + git submodule absorbgitdirs && + test -d .git/modules/sub1 && + test -d sub1 && + ! test -e sub1/.git +' + +test_expect_success 'setup nested submodule' ' + git init sub1/nested && + test_commit -C sub1/nested first_nested && + git -C sub1 submodule add ./nested && + test_tick && + git -C sub1 commit -m "add nested" && + git add sub1 && + git commit -m "sub1 to include nested submodule" +' + +test_expect_success 'absorb the git dir in a nested submodule' ' + git status >expect.1 && + git -C sub1/nested rev-parse HEAD >expect.2 && + git submodule absorbgitdirs && + test -f sub1/nested/.git && + test -d .git/modules/sub1/modules/nested && + git status >actual.1 && + git -C sub1/nested rev-parse HEAD >actual.2 && + test_cmp expect.1 actual.1 && + test_cmp expect.2 actual.2 +' + +test_expect_success 'setup a gitlink with missing .gitmodules entry' ' + git init sub2 && + test_commit -C sub2 first && + git add sub2 && + git commit -m superproject +' + +test_expect_success 'absorbing the git dir fails for incomplete submodules' ' + git status >expect.1 && + git -C sub2 rev-parse HEAD >expect.2 && + test_must_fail git submodule absorbgitdirs && + git -C sub2 fsck && + test -d sub2/.git && + git status >actual && + git -C sub2 rev-parse HEAD >actual.2 && + test_cmp expect.1 actual.1 && + test_cmp expect.2 actual.2 +' + +test_expect_success 'setup a submodule with multiple worktrees' ' + # first create another unembedded git dir in a new submodule + git init sub3 && + test_commit -C sub3 first && + git submodule add ./sub3 && + test_tick && + git commit -m "add another submodule" && + git -C sub3 worktree add ../sub3_second_work_tree +' + +test_expect_success 'absorbing fails for a submodule with multiple worktrees' ' + test_must_fail git submodule absorbgitdirs sub3 2>error && + test_i18ngrep "not supported" error +' + +test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index 63e04277f9..0b6da7ae1f 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -155,6 +155,15 @@ test_expect_success 'amend --only ignores staged contents' ' git diff --exit-code ' +test_expect_success 'allow-empty --only ignores staged contents' ' + echo changed-again >file && + git add file && + git commit --allow-empty --only -m "empty" && + git cat-file blob HEAD:file >file.actual && + test_cmp file.expect file.actual && + git diff --exit-code +' + test_expect_success 'set up editor' ' cat >editor <<-\EOF && #!/bin/sh @@ -200,6 +209,26 @@ test_expect_success '--amend --edit of empty message' ' test_cmp expect msg ' +test_expect_success '--amend to set message to empty' ' + echo bata >file && + git add file && + git commit -m "unamended" && + git commit --amend --allow-empty-message -m "" && + git diff-tree -s --format=%s HEAD >msg && + echo "" >expect && + test_cmp expect msg +' + +test_expect_success '--amend to set empty message needs --allow-empty-message' ' + echo conga >file && + git add file && + git commit -m "unamended" && + test_must_fail git commit --amend -m "" && + git diff-tree -s --format=%s HEAD >msg && + echo "unamended" >expect && + test_cmp expect msg +' + test_expect_success '-m --edit' ' echo amended >expect && git commit --allow-empty -m buffer && @@ -440,6 +469,42 @@ $alt" && test_cmp expected actual ' +test_expect_success 'signoff respects trailer config' ' + + echo 5 >positive && + git add positive && + git commit -s -m "subject + +non-trailer line +Myfooter: x" && + git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + ( + echo subject + echo + echo non-trailer line + echo Myfooter: x + echo + echo "Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" + ) >expected && + test_cmp expected actual && + + echo 6 >positive && + git add positive && + git -c "trailer.Myfooter.ifexists=add" commit -s -m "subject + +non-trailer line +Myfooter: x" && + git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + ( + echo subject + echo + echo non-trailer line + echo Myfooter: x + echo "Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" + ) >expected && + test_cmp expected actual +' + test_expect_success 'multiple -m' ' >negative && @@ -587,4 +652,24 @@ test_expect_success '--only works on to-be-born branch' ' test_cmp expected actual ' +test_expect_success '--dry-run with conflicts fixed from a merge' ' + # setup two branches with conflicting information + # in the same file, resolve the conflict, + # call commit with --dry-run + echo "Initial contents, unimportant" >test-file && + git add test-file && + git commit -m "Initial commit" && + echo "commit-1-state" >test-file && + git commit -m "commit 1" -i test-file && + git tag commit-1 && + git checkout -b branch-2 HEAD^1 && + echo "commit-2-state" >test-file && + git commit -m "commit 2" -i test-file && + ! $(git merge --no-commit commit-1) && + echo "commit-2-state" >test-file && + git add test-file && + git commit --dry-run && + git commit -m "conflicts fixed from merge." +' + test_done diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 2e0d557243..725687d5d5 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -229,14 +229,36 @@ test_expect_success 'cleanup commit messages (scissors option,-F,-e)' ' cat >text <<EOF && # to be kept + + # ------------------------ >8 ------------------------ +# to be kept, too # ------------------------ >8 ------------------------ to be removed +# ------------------------ >8 ------------------------ +to be removed, too +EOF + + cat >expect <<EOF && +# to be kept + + # ------------------------ >8 ------------------------ +# to be kept, too EOF - echo "# to be kept" >expect && git commit --cleanup=scissors -e -F text -a && git cat-file -p HEAD |sed -e "1,/^\$/d">actual && test_cmp expect actual +' + +test_expect_success 'cleanup commit messages (scissors option,-F,-e, scissors on first line)' ' + echo >>negative && + cat >text <<EOF && +# ------------------------ >8 ------------------------ +to be removed +EOF + git commit --cleanup=scissors -e -F text -a --allow-empty-message && + git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + test_must_be_empty actual ' test_expect_success 'cleanup commit messages (strip option,-F)' ' @@ -505,11 +527,6 @@ try_commit_status_combo () { test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' - test_expect_success 'commit' ' - try_commit "" && - test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG - ' - test_expect_success 'commit --status' ' try_commit --status && test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG diff --git a/t/t7504-commit-msg-hook.sh b/t/t7504-commit-msg-hook.sh index 1f53ea8090..8728db61d3 100755 --- a/t/t7504-commit-msg-hook.sh +++ b/t/t7504-commit-msg-hook.sh @@ -179,7 +179,7 @@ EOF chmod +x "$HOOK" commit_msg_is () { - test "`git log --pretty=format:%s%b -1`" = "$1" + test "$(git log --pretty=format:%s%b -1)" = "$1" } test_expect_success 'hook edits commit message' ' diff --git a/t/t7505-prepare-commit-msg-hook.sh b/t/t7505-prepare-commit-msg-hook.sh index 03dce09cfe..b13f72975e 100755 --- a/t/t7505-prepare-commit-msg-hook.sh +++ b/t/t7505-prepare-commit-msg-hook.sh @@ -53,7 +53,7 @@ test_expect_success 'with hook (-m)' ' echo "more" >> file && git add file && git commit -m "more" && - test "`git log -1 --pretty=format:%s`" = "message (no editor)" + test "$(git log -1 --pretty=format:%s)" = "message (no editor)" ' @@ -62,7 +62,7 @@ test_expect_success 'with hook (-m editor)' ' echo "more" >> file && git add file && GIT_EDITOR="\"\$FAKE_EDITOR\"" git commit -e -m "more more" && - test "`git log -1 --pretty=format:%s`" = message + test "$(git log -1 --pretty=format:%s)" = message ' @@ -71,7 +71,7 @@ test_expect_success 'with hook (-t)' ' echo "more" >> file && git add file && git commit -t "$(git rev-parse --git-dir)/template" && - test "`git log -1 --pretty=format:%s`" = template + test "$(git log -1 --pretty=format:%s)" = template ' @@ -80,7 +80,7 @@ test_expect_success 'with hook (-F)' ' echo "more" >> file && git add file && (echo more | git commit -F -) && - test "`git log -1 --pretty=format:%s`" = "message (no editor)" + test "$(git log -1 --pretty=format:%s)" = "message (no editor)" ' @@ -89,17 +89,17 @@ test_expect_success 'with hook (-F editor)' ' echo "more" >> file && git add file && (echo more more | GIT_EDITOR="\"\$FAKE_EDITOR\"" git commit -e -F -) && - test "`git log -1 --pretty=format:%s`" = message + test "$(git log -1 --pretty=format:%s)" = message ' test_expect_success 'with hook (-C)' ' - head=`git rev-parse HEAD` && + head=$(git rev-parse HEAD) && echo "more" >> file && git add file && git commit -C $head && - test "`git log -1 --pretty=format:%s`" = "$head (no editor)" + test "$(git log -1 --pretty=format:%s)" = "$head (no editor)" ' @@ -108,27 +108,27 @@ test_expect_success 'with hook (editor)' ' echo "more more" >> file && git add file && GIT_EDITOR="\"\$FAKE_EDITOR\"" git commit && - test "`git log -1 --pretty=format:%s`" = default + test "$(git log -1 --pretty=format:%s)" = default ' test_expect_success 'with hook (--amend)' ' - head=`git rev-parse HEAD` && + head=$(git rev-parse HEAD) && echo "more" >> file && git add file && GIT_EDITOR="\"\$FAKE_EDITOR\"" git commit --amend && - test "`git log -1 --pretty=format:%s`" = "$head" + test "$(git log -1 --pretty=format:%s)" = "$head" ' test_expect_success 'with hook (-c)' ' - head=`git rev-parse HEAD` && + head=$(git rev-parse HEAD) && echo "more" >> file && git add file && GIT_EDITOR="\"\$FAKE_EDITOR\"" git commit -c $head && - test "`git log -1 --pretty=format:%s`" = "$head" + test "$(git log -1 --pretty=format:%s)" = "$head" ' @@ -141,7 +141,7 @@ test_expect_success 'with hook (merge)' ' git commit -m other && git checkout - && git merge --no-ff other && - test "`git log -1 --pretty=format:%s`" = "merge (no editor)" + test "$(git log -1 --pretty=format:%s)" = "merge (no editor)" ' test_expect_success 'with hook and editor (merge)' ' @@ -153,7 +153,7 @@ test_expect_success 'with hook and editor (merge)' ' git commit -m other && git checkout - && env GIT_EDITOR="\"\$FAKE_EDITOR\"" git merge --no-ff -e other && - test "`git log -1 --pretty=format:%s`" = "merge" + test "$(git log -1 --pretty=format:%s)" = "merge" ' cat > "$HOOK" <<'EOF' @@ -164,7 +164,7 @@ EOF test_expect_success 'with failing hook' ' test_when_finished "git checkout -f master" && - head=`git rev-parse HEAD` && + head=$(git rev-parse HEAD) && echo "more" >> file && git add file && test_must_fail env GIT_EDITOR="\"\$FAKE_EDITOR\"" git commit -c $head @@ -174,7 +174,7 @@ test_expect_success 'with failing hook' ' test_expect_success 'with failing hook (--no-verify)' ' test_when_finished "git checkout -f master" && - head=`git rev-parse HEAD` && + head=$(git rev-parse HEAD) && echo "more" >> file && git add file && test_must_fail env GIT_EDITOR="\"\$FAKE_EDITOR\"" git commit --no-verify -c $head diff --git a/t/t7507-commit-verbose.sh b/t/t7507-commit-verbose.sh index 2ddf28c984..ed2653d46f 100755 --- a/t/t7507-commit-verbose.sh +++ b/t/t7507-commit-verbose.sh @@ -3,11 +3,10 @@ test_description='verbose commit template' . ./test-lib.sh -cat >check-for-diff <<EOF -#!$SHELL_PATH -exec grep '^diff --git' "\$1" +write_script "check-for-diff" <<\EOF && +grep '^diff --git' "$1" >out +exit 0 EOF -chmod +x check-for-diff test_set_editor "$PWD/check-for-diff" cat >message <<'EOF' @@ -23,7 +22,8 @@ test_expect_success 'setup' ' ' test_expect_success 'initial commit shows verbose diff' ' - git commit --amend -v + git commit --amend -v && + test_line_count = 1 out ' test_expect_success 'second commit' ' @@ -39,13 +39,15 @@ check_message() { test_expect_success 'verbose diff is stripped out' ' git commit --amend -v && - check_message message + check_message message && + test_line_count = 1 out ' test_expect_success 'verbose diff is stripped out (mnemonicprefix)' ' git config diff.mnemonicprefix true && git commit --amend -v && - check_message message + check_message message && + test_line_count = 1 out ' cat >diff <<'EOF' @@ -96,4 +98,60 @@ test_expect_success 'verbose diff is stripped out with set core.commentChar' ' test_i18ngrep "Aborting commit due to empty commit message." err ' +test_expect_success 'status does not verbose without --verbose' ' + git status >actual && + ! grep "^diff --git" actual +' + +test_expect_success 'setup -v -v' ' + echo dirty >file +' + +for i in true 1 +do + test_expect_success "commit.verbose=$i and --verbose omitted" " + git -c commit.verbose=$i commit --amend && + test_line_count = 1 out + " +done + +for i in false -2 -1 0 +do + test_expect_success "commit.verbose=$i and --verbose omitted" " + git -c commit.verbose=$i commit --amend && + test_line_count = 0 out + " +done + +for i in 2 3 +do + test_expect_success "commit.verbose=$i and --verbose omitted" " + git -c commit.verbose=$i commit --amend && + test_line_count = 2 out + " +done + +for i in true false -2 -1 0 1 2 3 +do + test_expect_success "commit.verbose=$i and --verbose" " + git -c commit.verbose=$i commit --amend --verbose && + test_line_count = 1 out + " + + test_expect_success "commit.verbose=$i and --no-verbose" " + git -c commit.verbose=$i commit --amend --no-verbose && + test_line_count = 0 out + " + + test_expect_success "commit.verbose=$i and -v -v" " + git -c commit.verbose=$i commit --amend -v -v && + test_line_count = 2 out + " +done + +test_expect_success "status ignores commit.verbose=true" ' + git -c commit.verbose=true status >actual && + ! grep "^diff --git actual" +' + test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index c3ed7cb51c..fb00e6d9b0 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -803,7 +803,7 @@ EOF ' cat >expect <<EOF -:100644 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0000000000000000000000000000000000000000 M dir1/modified +:100644 100644 $EMPTY_BLOB 0000000000000000000000000000000000000000 M dir1/modified EOF test_expect_success 'status refreshes the index' ' touch dir2/added && @@ -1377,7 +1377,7 @@ EOF git config --add -f .gitmodules submodule.subname.ignore all && git config --add -f .gitmodules submodule.subname.path sm && git status > output && - test_cmp expect output && + test_i18ncmp expect output && git config -f .gitmodules --remove-section submodule.subname ' @@ -1387,7 +1387,7 @@ test_expect_success '.git/config ignore=all suppresses unstaged submodule summar git config --add submodule.subname.ignore all && git config --add submodule.subname.path sm && git status > output && - test_cmp expect output && + test_i18ncmp expect output && git config --remove-section submodule.subname && git config -f .gitmodules --remove-section submodule.subname ' diff --git a/t/t7509-commit.sh b/t/t7509-commit.sh index 9ac794052d..db9774e345 100755 --- a/t/t7509-commit.sh +++ b/t/t7509-commit.sh @@ -90,22 +90,10 @@ sha1_file() { remove_object() { rm -f $(sha1_file "$*") } -no_reflog() { - cp .git/config .git/config.saved && - echo "[core] logallrefupdates = false" >>.git/config && - test_when_finished "mv -f .git/config.saved .git/config" && - - if test -e .git/logs - then - mv .git/logs . && - test_when_finished "mv logs .git/" - fi -} test_expect_success '--amend option with empty author' ' git cat-file commit Initial >tmp && sed "s/author [^<]* </author </" tmp >empty-author && - no_reflog && sha=$(git hash-object -t commit -w empty-author) && test_when_finished "remove_object $sha" && git checkout $sha && @@ -119,7 +107,6 @@ test_expect_success '--amend option with empty author' ' test_expect_success '--amend option with missing author' ' git cat-file commit Initial >tmp && sed "s/author [^<]* </author </" tmp >malformed && - no_reflog && sha=$(git hash-object -t commit -w malformed) && test_when_finished "remove_object $sha" && git checkout $sha && diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 13331e533b..762135adea 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -2,6 +2,7 @@ test_description='signed commit tests' . ./test-lib.sh +GNUPGHOME_NOT_USED=$GNUPGHOME . "$TEST_DIRECTORY/lib-gpg.sh" test_expect_success GPG 'create signed commits' ' @@ -45,12 +46,18 @@ test_expect_success GPG 'create signed commits' ' git tag seventh-signed && echo 8 >file && test_tick && git commit -a -m eighth -SB7227189 && - git tag eighth-signed-alt + git tag eighth-signed-alt && + + # commit.gpgsign is still on but this must not be signed + git tag ninth-unsigned $(echo 9 | git commit-tree HEAD^{tree}) && + # explicit -S of course must sign. + git tag tenth-signed $(echo 9 | git commit-tree -S HEAD^{tree}) ' test_expect_success GPG 'verify and show signatures' ' ( - for commit in initial second merge fourth-signed fifth-signed sixth-signed seventh-signed + for commit in initial second merge fourth-signed \ + fifth-signed sixth-signed seventh-signed tenth-signed do git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && @@ -60,7 +67,8 @@ test_expect_success GPG 'verify and show signatures' ' done ) && ( - for commit in merge^2 fourth-unsigned sixth-unsigned seventh-unsigned + for commit in merge^2 fourth-unsigned sixth-unsigned \ + seventh-unsigned ninth-unsigned do test_must_fail git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && @@ -81,6 +89,44 @@ test_expect_success GPG 'verify and show signatures' ' ) ' +test_expect_success GPG 'verify-commit exits success on untrusted signature' ' + git verify-commit eighth-signed-alt 2>actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + grep "not certified" actual +' + +test_expect_success GPG 'verify signatures with --raw' ' + ( + for commit in initial second merge fourth-signed fifth-signed sixth-signed seventh-signed + do + git verify-commit --raw $commit 2>actual && + grep "GOODSIG" actual && + ! grep "BADSIG" actual && + echo $commit OK || exit 1 + done + ) && + ( + for commit in merge^2 fourth-unsigned sixth-unsigned seventh-unsigned + do + test_must_fail git verify-commit --raw $commit 2>actual && + ! grep "GOODSIG" actual && + ! grep "BADSIG" actual && + echo $commit OK || exit 1 + done + ) && + ( + for commit in eighth-signed-alt + do + git verify-commit --raw $commit 2>actual && + grep "GOODSIG" actual && + ! grep "BADSIG" actual && + grep "TRUST_UNDEFINED" actual && + echo $commit OK || exit 1 + done + ) +' + test_expect_success GPG 'show signed commit with signature' ' git show -s initial >commit && git show -s --show-signature initial >show && @@ -145,7 +191,7 @@ test_expect_success GPG 'show bad signature with custom format' ' test_cmp expect actual ' -test_expect_success GPG 'show unknown signature with custom format' ' +test_expect_success GPG 'show untrusted signature with custom format' ' cat >expect <<-\EOF && U 61092E85B7227189 @@ -155,6 +201,16 @@ test_expect_success GPG 'show unknown signature with custom format' ' test_cmp expect actual ' +test_expect_success GPG 'show unknown signature with custom format' ' + cat >expect <<-\EOF && + E + 61092E85B7227189 + + EOF + GNUPGHOME="$GNUPGHOME_NOT_USED" git log -1 --format="%G?%n%GK%n%GS" eighth-signed-alt >actual && + test_cmp expect actual +' + test_expect_success GPG 'show lack of signature with custom format' ' cat >expect <<-\EOF && N @@ -165,4 +221,11 @@ test_expect_success GPG 'show lack of signature with custom format' ' test_cmp expect actual ' +test_expect_success GPG 'log.showsignature behaves like --show-signature' ' + test_config log.showsignature true && + git show initial >actual && + grep "gpg: Signature made" actual && + grep "gpg: Good signature" actual +' + test_done diff --git a/t/t7512-status-help.sh b/t/t7512-status-help.sh index 68ad2d7454..5c3db656df 100755 --- a/t/t7512-status-help.sh +++ b/t/t7512-status-help.sh @@ -29,6 +29,7 @@ test_expect_success 'status when conflicts unresolved' ' On branch conflicts You have unmerged paths. (fix conflicts and run "git commit") + (use "git merge --abort" to abort the merge) Unmerged paths: (use "git add <file>..." to mark resolution) @@ -134,9 +135,13 @@ test_expect_success 'prepare for rebase_i_conflicts' ' test_expect_success 'status during rebase -i when conflicts unresolved' ' test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short rebase_i_conflicts) && + LAST_COMMIT=$(git rev-parse --short rebase_i_conflicts_second) && test_must_fail git rebase -i rebase_i_conflicts && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last command done (1 command done): + pick $LAST_COMMIT one_second +No commands remaining. You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO'\''. (fix conflicts and then run "git rebase --continue") (use "git rebase --skip" to skip this patch) @@ -159,10 +164,14 @@ test_expect_success 'status during rebase -i after resolving conflicts' ' git reset --hard rebase_i_conflicts_second && test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short rebase_i_conflicts) && + LAST_COMMIT=$(git rev-parse --short rebase_i_conflicts_second) && test_must_fail git rebase -i rebase_i_conflicts && git add main.txt && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last command done (1 command done): + pick $LAST_COMMIT one_second +No commands remaining. You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO'\''. (all conflicts fixed: run "git rebase --continue") @@ -183,14 +192,20 @@ test_expect_success 'status when rebasing -i in edit mode' ' git checkout -b rebase_i_edit && test_commit one_rebase_i main.txt one && test_commit two_rebase_i main.txt two && + COMMIT2=$(git rev-parse --short rebase_i_edit) && test_commit three_rebase_i main.txt three && + COMMIT3=$(git rev-parse --short rebase_i_edit) && FAKE_LINES="1 edit 2" && export FAKE_LINES && test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short HEAD~2) && git rebase -i HEAD~2 && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + pick $COMMIT2 two_rebase_i + edit $COMMIT3 three_rebase_i +No commands remaining. You are currently editing a commit while rebasing branch '\''rebase_i_edit'\'' on '\''$ONTO'\''. (use "git commit --amend" to amend the current commit) (use "git rebase --continue" once you are satisfied with your changes) @@ -207,8 +222,11 @@ test_expect_success 'status when splitting a commit' ' git checkout -b split_commit && test_commit one_split main.txt one && test_commit two_split main.txt two && + COMMIT2=$(git rev-parse --short split_commit) && test_commit three_split main.txt three && + COMMIT3=$(git rev-parse --short split_commit) && test_commit four_split main.txt four && + COMMIT4=$(git rev-parse --short split_commit) && FAKE_LINES="1 edit 2 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && @@ -216,7 +234,13 @@ test_expect_success 'status when splitting a commit' ' git rebase -i HEAD~3 && git reset HEAD^ && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + pick $COMMIT2 two_split + edit $COMMIT3 three_split +Next command to do (1 remaining command): + pick $COMMIT4 four_split + (use "git rebase --edit-todo" to view and edit) You are currently splitting a commit while rebasing branch '\''split_commit'\'' on '\''$ONTO'\''. (Once your working directory is clean, run "git rebase --continue") @@ -239,7 +263,9 @@ test_expect_success 'status after editing the last commit with --amend during a test_commit one_amend main.txt one && test_commit two_amend main.txt two && test_commit three_amend main.txt three && + COMMIT3=$(git rev-parse --short amend_last) && test_commit four_amend main.txt four && + COMMIT4=$(git rev-parse --short amend_last) && FAKE_LINES="1 2 edit 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && @@ -247,7 +273,12 @@ test_expect_success 'status after editing the last commit with --amend during a git rebase -i HEAD~3 && git commit --amend -m "foo" && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (3 commands done): + pick $COMMIT3 three_amend + edit $COMMIT4 four_amend + (see more in file .git/rebase-merge/done) +No commands remaining. You are currently editing a commit while rebasing branch '\''amend_last'\'' on '\''$ONTO'\''. (use "git commit --amend" to amend the current commit) (use "git rebase --continue" once you are satisfied with your changes) @@ -273,11 +304,20 @@ test_expect_success 'status: (continue first edit) second edit' ' FAKE_LINES="edit 1 edit 2 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && + COMMIT2=$(git rev-parse --short several_edits^^) && + COMMIT3=$(git rev-parse --short several_edits^) && + COMMIT4=$(git rev-parse --short several_edits) && ONTO=$(git rev-parse --short HEAD~3) && git rebase -i HEAD~3 && git rebase --continue && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + edit $COMMIT2 two_edits + edit $COMMIT3 three_edits +Next command to do (1 remaining command): + pick $COMMIT4 four_edits + (use "git rebase --edit-todo" to view and edit) You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''. (use "git commit --amend" to amend the current commit) (use "git rebase --continue" once you are satisfied with your changes) @@ -294,12 +334,21 @@ test_expect_success 'status: (continue first edit) second edit and split' ' FAKE_LINES="edit 1 edit 2 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && + COMMIT2=$(git rev-parse --short several_edits^^) && + COMMIT3=$(git rev-parse --short several_edits^) && + COMMIT4=$(git rev-parse --short several_edits) && ONTO=$(git rev-parse --short HEAD~3) && git rebase -i HEAD~3 && git rebase --continue && git reset HEAD^ && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + edit $COMMIT2 two_edits + edit $COMMIT3 three_edits +Next command to do (1 remaining command): + pick $COMMIT4 four_edits + (use "git rebase --edit-todo" to view and edit) You are currently splitting a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''. (Once your working directory is clean, run "git rebase --continue") @@ -321,12 +370,21 @@ test_expect_success 'status: (continue first edit) second edit and amend' ' FAKE_LINES="edit 1 edit 2 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && + COMMIT2=$(git rev-parse --short several_edits^^) && + COMMIT3=$(git rev-parse --short several_edits^) && + COMMIT4=$(git rev-parse --short several_edits) && ONTO=$(git rev-parse --short HEAD~3) && git rebase -i HEAD~3 && git rebase --continue && git commit --amend -m "foo" && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + edit $COMMIT2 two_edits + edit $COMMIT3 three_edits +Next command to do (1 remaining command): + pick $COMMIT4 four_edits + (use "git rebase --edit-todo" to view and edit) You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''. (use "git commit --amend" to amend the current commit) (use "git rebase --continue" once you are satisfied with your changes) @@ -343,12 +401,21 @@ test_expect_success 'status: (amend first edit) second edit' ' FAKE_LINES="edit 1 edit 2 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && + COMMIT2=$(git rev-parse --short several_edits^^) && + COMMIT3=$(git rev-parse --short several_edits^) && + COMMIT4=$(git rev-parse --short several_edits) && ONTO=$(git rev-parse --short HEAD~3) && git rebase -i HEAD~3 && git commit --amend -m "a" && git rebase --continue && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + edit $COMMIT2 two_edits + edit $COMMIT3 three_edits +Next command to do (1 remaining command): + pick $COMMIT4 four_edits + (use "git rebase --edit-todo" to view and edit) You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''. (use "git commit --amend" to amend the current commit) (use "git rebase --continue" once you are satisfied with your changes) @@ -366,12 +433,21 @@ test_expect_success 'status: (amend first edit) second edit and split' ' export FAKE_LINES && test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short HEAD~3) && + COMMIT2=$(git rev-parse --short several_edits^^) && + COMMIT3=$(git rev-parse --short several_edits^) && + COMMIT4=$(git rev-parse --short several_edits) && git rebase -i HEAD~3 && git commit --amend -m "b" && git rebase --continue && git reset HEAD^ && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + edit $COMMIT2 two_edits + edit $COMMIT3 three_edits +Next command to do (1 remaining command): + pick $COMMIT4 four_edits + (use "git rebase --edit-todo" to view and edit) You are currently splitting a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''. (Once your working directory is clean, run "git rebase --continue") @@ -393,13 +469,22 @@ test_expect_success 'status: (amend first edit) second edit and amend' ' FAKE_LINES="edit 1 edit 2 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && + COMMIT2=$(git rev-parse --short several_edits^^) && + COMMIT3=$(git rev-parse --short several_edits^) && + COMMIT4=$(git rev-parse --short several_edits) && ONTO=$(git rev-parse --short HEAD~3) && git rebase -i HEAD~3 && git commit --amend -m "c" && git rebase --continue && git commit --amend -m "d" && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + edit $COMMIT2 two_edits + edit $COMMIT3 three_edits +Next command to do (1 remaining command): + pick $COMMIT4 four_edits + (use "git rebase --edit-todo" to view and edit) You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''. (use "git commit --amend" to amend the current commit) (use "git rebase --continue" once you are satisfied with your changes) @@ -416,6 +501,9 @@ test_expect_success 'status: (split first edit) second edit' ' FAKE_LINES="edit 1 edit 2 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && + COMMIT2=$(git rev-parse --short several_edits^^) && + COMMIT3=$(git rev-parse --short several_edits^) && + COMMIT4=$(git rev-parse --short several_edits) && ONTO=$(git rev-parse --short HEAD~3) && git rebase -i HEAD~3 && git reset HEAD^ && @@ -423,7 +511,13 @@ test_expect_success 'status: (split first edit) second edit' ' git commit -m "e" && git rebase --continue && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + edit $COMMIT2 two_edits + edit $COMMIT3 three_edits +Next command to do (1 remaining command): + pick $COMMIT4 four_edits + (use "git rebase --edit-todo" to view and edit) You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''. (use "git commit --amend" to amend the current commit) (use "git rebase --continue" once you are satisfied with your changes) @@ -440,6 +534,9 @@ test_expect_success 'status: (split first edit) second edit and split' ' FAKE_LINES="edit 1 edit 2 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && + COMMIT2=$(git rev-parse --short several_edits^^) && + COMMIT3=$(git rev-parse --short several_edits^) && + COMMIT4=$(git rev-parse --short several_edits) && ONTO=$(git rev-parse --short HEAD~3) && git rebase -i HEAD~3 && git reset HEAD^ && @@ -448,7 +545,13 @@ test_expect_success 'status: (split first edit) second edit and split' ' git rebase --continue && git reset HEAD^ && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + edit $COMMIT2 two_edits + edit $COMMIT3 three_edits +Next command to do (1 remaining command): + pick $COMMIT4 four_edits + (use "git rebase --edit-todo" to view and edit) You are currently splitting a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''. (Once your working directory is clean, run "git rebase --continue") @@ -470,6 +573,9 @@ test_expect_success 'status: (split first edit) second edit and amend' ' FAKE_LINES="edit 1 edit 2 3" && export FAKE_LINES && test_when_finished "git rebase --abort" && + COMMIT2=$(git rev-parse --short several_edits^^) && + COMMIT3=$(git rev-parse --short several_edits^) && + COMMIT4=$(git rev-parse --short several_edits) && ONTO=$(git rev-parse --short HEAD~3) && git rebase -i HEAD~3 && git reset HEAD^ && @@ -478,7 +584,13 @@ test_expect_success 'status: (split first edit) second edit and amend' ' git rebase --continue && git commit --amend -m "h" && cat >expected <<EOF && -rebase in progress; onto $ONTO +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + edit $COMMIT2 two_edits + edit $COMMIT3 three_edits +Next command to do (1 remaining command): + pick $COMMIT4 four_edits + (use "git rebase --edit-todo" to view and edit) You are currently editing a commit while rebasing branch '\''several_edits'\'' on '\''$ONTO'\''. (use "git commit --amend" to amend the current commit) (use "git rebase --continue" once you are satisfied with your changes) @@ -745,4 +857,91 @@ EOF test_i18ncmp expected actual ' +test_expect_success 'prepare for different number of commits rebased' ' + git reset --hard master && + git checkout -b several_commits && + test_commit one_commit main.txt one && + test_commit two_commit main.txt two && + test_commit three_commit main.txt three && + test_commit four_commit main.txt four +' + +test_expect_success 'status: one command done nothing remaining' ' + FAKE_LINES="exec_exit_15" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + ONTO=$(git rev-parse --short HEAD~3) && + test_must_fail git rebase -i HEAD~3 && + cat >expected <<EOF && +interactive rebase in progress; onto $ONTO +Last command done (1 command done): + exec exit 15 +No commands remaining. +You are currently editing a commit while rebasing branch '\''several_commits'\'' on '\''$ONTO'\''. + (use "git commit --amend" to amend the current commit) + (use "git rebase --continue" once you are satisfied with your changes) + +nothing to commit (use -u to show untracked files) +EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + +test_expect_success 'status: two commands done with some white lines in done file' ' + FAKE_LINES="1 > exec_exit_15 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + ONTO=$(git rev-parse --short HEAD~3) && + COMMIT4=$(git rev-parse --short HEAD) && + COMMIT3=$(git rev-parse --short HEAD^) && + COMMIT2=$(git rev-parse --short HEAD^^) && + test_must_fail git rebase -i HEAD~3 && + cat >expected <<EOF && +interactive rebase in progress; onto $ONTO +Last commands done (2 commands done): + pick $COMMIT2 two_commit + exec exit 15 +Next commands to do (2 remaining commands): + pick $COMMIT3 three_commit + pick $COMMIT4 four_commit + (use "git rebase --edit-todo" to view and edit) +You are currently editing a commit while rebasing branch '\''several_commits'\'' on '\''$ONTO'\''. + (use "git commit --amend" to amend the current commit) + (use "git rebase --continue" once you are satisfied with your changes) + +nothing to commit (use -u to show untracked files) +EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + +test_expect_success 'status: two remaining commands with some white lines in todo file' ' + FAKE_LINES="1 2 exec_exit_15 3 > 4" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + ONTO=$(git rev-parse --short HEAD~4) && + COMMIT4=$(git rev-parse --short HEAD) && + COMMIT3=$(git rev-parse --short HEAD^) && + COMMIT2=$(git rev-parse --short HEAD^^) && + test_must_fail git rebase -i HEAD~4 && + cat >expected <<EOF && +interactive rebase in progress; onto $ONTO +Last commands done (3 commands done): + pick $COMMIT2 two_commit + exec exit 15 + (see more in file .git/rebase-merge/done) +Next commands to do (2 remaining commands): + pick $COMMIT3 three_commit + pick $COMMIT4 four_commit + (use "git rebase --edit-todo" to view and edit) +You are currently editing a commit while rebasing branch '\''several_commits'\'' on '\''$ONTO'\''. + (use "git commit --amend" to amend the current commit) + (use "git rebase --continue" once you are satisfied with your changes) + +nothing to commit (use -u to show untracked files) +EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + test_done diff --git a/t/t7513-interpret-trailers.sh b/t/t7513-interpret-trailers.sh index bd0ab46750..4dd1d7c520 100755 --- a/t/t7513-interpret-trailers.sh +++ b/t/t7513-interpret-trailers.sh @@ -93,12 +93,338 @@ test_expect_success 'with config option on the command line' ' Acked-by: Johan Reviewed-by: Peff EOF - echo "Acked-by: Johan" | + { echo; echo "Acked-by: Johan"; } | git -c "trailer.Acked-by.ifexists=addifdifferent" interpret-trailers \ --trailer "Reviewed-by: Peff" --trailer "Acked-by: Johan" >actual && test_cmp expected actual ' +test_expect_success 'with only a title in the message' ' + cat >expected <<-\EOF && + area: change + + Reviewed-by: Peff + Acked-by: Johan + EOF + echo "area: change" | + git interpret-trailers --trailer "Reviewed-by: Peff" \ + --trailer "Acked-by: Johan" >actual && + test_cmp expected actual +' + +test_expect_success 'with multiline title in the message' ' + cat >expected <<-\EOF && + place of + code: change + + Reviewed-by: Peff + Acked-by: Johan + EOF + printf "%s\n" "place of" "code: change" | + git interpret-trailers --trailer "Reviewed-by: Peff" \ + --trailer "Acked-by: Johan" >actual && + test_cmp expected actual +' + +test_expect_success 'with non-trailer lines mixed with Signed-off-by' ' + cat >patch <<-\EOF && + + this is not a trailer + this is not a trailer + Signed-off-by: a <a@example.com> + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + this is not a trailer + Signed-off-by: a <a@example.com> + this is not a trailer + token: value + EOF + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with non-trailer lines mixed with cherry picked from' ' + cat >patch <<-\EOF && + + this is not a trailer + this is not a trailer + (cherry picked from commit x) + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + this is not a trailer + (cherry picked from commit x) + this is not a trailer + token: value + EOF + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with non-trailer lines mixed with a configured trailer' ' + cat >patch <<-\EOF && + + this is not a trailer + this is not a trailer + My-trailer: x + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + this is not a trailer + My-trailer: x + this is not a trailer + token: value + EOF + test_config trailer.my.key "My-trailer: " && + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with non-trailer lines mixed with a non-configured trailer' ' + cat >patch <<-\EOF && + + this is not a trailer + this is not a trailer + I-am-not-configured: x + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + this is not a trailer + I-am-not-configured: x + this is not a trailer + + token: value + EOF + test_config trailer.my.key "My-trailer: " && + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with all non-configured trailers' ' + cat >patch <<-\EOF && + + I-am-not-configured: x + I-am-also-not-configured: x + EOF + cat >expected <<-\EOF && + + I-am-not-configured: x + I-am-also-not-configured: x + token: value + EOF + test_config trailer.my.key "My-trailer: " && + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with non-trailer lines only' ' + cat >patch <<-\EOF && + + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + + token: value + EOF + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'line with leading whitespace is not trailer' ' + q_to_tab >patch <<-\EOF && + + Qtoken: value + EOF + q_to_tab >expected <<-\EOF && + + Qtoken: value + + token: value + EOF + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as one trailer for 25% check' ' + q_to_tab >patch <<-\EOF && + + Signed-off-by: a <a@example.com> + name: value on + Qmultiple lines + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + EOF + q_to_tab >expected <<-\EOF && + + Signed-off-by: a <a@example.com> + name: value on + Qmultiple lines + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + name: value + EOF + git interpret-trailers --trailer "name: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as atomic for placement' ' + q_to_tab >patch <<-\EOF && + + another: trailer + name: value on + Qmultiple lines + another: trailer + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: value on + Qmultiple lines + name: value + another: trailer + EOF + test_config trailer.name.where after && + git interpret-trailers --trailer "name: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as atomic for replacement' ' + q_to_tab >patch <<-\EOF && + + another: trailer + name: value on + Qmultiple lines + another: trailer + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + another: trailer + name: value + EOF + test_config trailer.name.ifexists replace && + git interpret-trailers --trailer "name: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as atomic for difference check' ' + q_to_tab >patch <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + EOF + test_config trailer.name.ifexists addIfDifferent && + + q_to_tab >trailer <<-\EOF && + name: first line + Qsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual && + + q_to_tab >trailer <<-\EOF && + name: first line + QQQQQsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + name: first line + QQQQQsecond line + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual && + + q_to_tab >trailer <<-\EOF && + name: first line *DIFFERENT* + Qsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + name: first line *DIFFERENT* + Qsecond line + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as atomic for neighbor check' ' + q_to_tab >patch <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + EOF + test_config trailer.name.where after && + test_config trailer.name.ifexists addIfDifferentNeighbor && + + q_to_tab >trailer <<-\EOF && + name: first line + Qsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual && + + q_to_tab >trailer <<-\EOF && + name: first line + QQQQQsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + name: first line + QQQQQsecond line + another: trailer + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual +' + test_expect_success 'with config setup' ' git config trailer.ack.key "Acked-by: " && cat >expected <<-\EOF && @@ -299,6 +625,46 @@ test_expect_success 'with complex patch, args and --trim-empty' ' test_cmp expected actual ' +test_expect_success 'in-place editing with basic patch' ' + cat basic_message >message && + cat basic_patch >>message && + cat basic_message >expected && + echo >>expected && + cat basic_patch >>expected && + git interpret-trailers --in-place message && + test_cmp expected message +' + +test_expect_success 'in-place editing with additional trailer' ' + cat basic_message >message && + cat basic_patch >>message && + cat basic_message >expected && + echo >>expected && + cat >>expected <<-\EOF && + Reviewed-by: Alice + EOF + cat basic_patch >>expected && + git interpret-trailers --trailer "Reviewed-by: Alice" --in-place message && + test_cmp expected message +' + +test_expect_success 'in-place editing on stdin disallowed' ' + test_must_fail git interpret-trailers --trailer "Reviewed-by: Alice" --in-place < basic_message +' + +test_expect_success 'in-place editing on non-existing file' ' + test_must_fail git interpret-trailers --trailer "Reviewed-by: Alice" --in-place nonexisting && + test_path_is_missing nonexisting +' + +test_expect_success POSIXPERM,SANITY "in-place editing doesn't clobber original file on error" ' + cat basic_message >message && + chmod -r message && + test_must_fail git interpret-trailers --trailer "Reviewed-by: Alice" --in-place message && + chmod +r message && + test_cmp message basic_message +' + test_expect_success 'using "where = before"' ' git config trailer.bug.where "before" && cat complex_message_body >expected && diff --git a/t/t7517-per-repo-email.sh b/t/t7517-per-repo-email.sh new file mode 100755 index 0000000000..2a22fa7588 --- /dev/null +++ b/t/t7517-per-repo-email.sh @@ -0,0 +1,86 @@ +#!/bin/sh +# +# Copyright (c) 2016 Dan Aloni +# Copyright (c) 2016 Jeff King +# + +test_description='per-repo forced setting of email address' + +. ./test-lib.sh + +test_expect_success 'setup a likely user.useConfigOnly use case' ' + # we want to make sure a reflog is written, since that needs + # a non-strict ident. So be sure we have an actual commit. + test_commit foo && + + sane_unset GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL && + sane_unset GIT_COMMITTER_NAME GIT_COMMITTER_EMAIL && + git config user.name "test" && + git config --global user.useConfigOnly true +' + +test_expect_success 'fails committing if clone email is not set' ' + test_must_fail git commit --allow-empty -m msg +' + +test_expect_success 'fails committing if clone email is not set, but EMAIL set' ' + test_must_fail env EMAIL=test@fail.com git commit --allow-empty -m msg +' + +test_expect_success 'succeeds committing if clone email is set' ' + test_config user.email "test@ok.com" && + git commit --allow-empty -m msg +' + +test_expect_success 'succeeds cloning if global email is not set' ' + git clone . clone +' + +test_expect_success 'set up rebase scenarios' ' + # temporarily enable an actual ident for this setup + test_config user.email foo@example.com && + test_commit new && + git branch side-without-commit HEAD^ && + git checkout -b side-with-commit HEAD^ && + test_commit side +' + +test_expect_success 'fast-forward rebase does not care about ident' ' + git checkout -B tmp side-without-commit && + git rebase master +' + +test_expect_success 'non-fast-forward rebase refuses to write commits' ' + test_when_finished "git rebase --abort || true" && + git checkout -B tmp side-with-commit && + test_must_fail git rebase master +' + +test_expect_success 'fast-forward rebase does not care about ident (interactive)' ' + git checkout -B tmp side-without-commit && + git rebase -i master +' + +test_expect_success 'non-fast-forward rebase refuses to write commits (interactive)' ' + test_when_finished "git rebase --abort || true" && + git checkout -B tmp side-with-commit && + test_must_fail git rebase -i master +' + +test_expect_success 'noop interactive rebase does not care about ident' ' + git checkout -B tmp side-with-commit && + git rebase -i HEAD^ +' + +test_expect_success 'fast-forward rebase does not care about ident (preserve)' ' + git checkout -B tmp side-without-commit && + git rebase -p master +' + +test_expect_success 'non-fast-forward rebase refuses to write commits (preserve)' ' + test_when_finished "git rebase --abort || true" && + git checkout -B tmp side-with-commit && + test_must_fail git rebase -p master +' + +test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index 75c50eea15..2ebda509ac 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -33,9 +33,11 @@ printf '%s\n' 1 2 3 4 5 6 7 8 9 >file printf '%s\n' '1 X' 2 3 4 5 6 7 8 9 >file.1 printf '%s\n' 1 2 3 4 '5 X' 6 7 8 9 >file.5 printf '%s\n' 1 2 3 4 5 6 7 8 '9 X' >file.9 +printf '%s\n' 1 2 3 4 5 6 7 8 '9 Y' >file.9y printf '%s\n' '1 X' 2 3 4 5 6 7 8 9 >result.1 printf '%s\n' '1 X' 2 3 4 '5 X' 6 7 8 9 >result.1-5 printf '%s\n' '1 X' 2 3 4 '5 X' 6 7 8 '9 X' >result.1-5-9 +printf '%s\n' 1 2 3 4 5 6 7 8 '9 Z' >result.9z >empty create_merge_msgs () { @@ -128,6 +130,12 @@ test_expect_success 'setup' ' git tag c2 && c2=$(git rev-parse HEAD) && git reset --hard "$c0" && + cp file.9y file && + git add file && + test_tick && + git commit -m "commit 7" && + git tag c7 && + git reset --hard "$c0" && cp file.9 file && git add file && test_tick && @@ -146,6 +154,10 @@ test_expect_success 'test option parsing' ' test_must_fail git merge -s foobar c1 && test_must_fail git merge -s=foobar c1 && test_must_fail git merge -m && + test_must_fail git merge --abort foobar && + test_must_fail git merge --abort --quiet && + test_must_fail git merge --continue foobar && + test_must_fail git merge --continue --quiet && test_must_fail git merge ' @@ -218,6 +230,26 @@ test_expect_success 'merge c1 with c2' ' verify_parents $c1 $c2 ' +test_expect_success 'merge --squash c3 with c7' ' + git reset --hard c3 && + test_must_fail git merge --squash c7 && + cat result.9z >file && + git commit --no-edit -a && + + { + cat <<-EOF + Squashed commit of the following: + + $(git show -s c7) + + # Conflicts: + # file + EOF + } >expect && + git cat-file commit HEAD | sed -e '1,/^$/d' >actual && + test_cmp expect actual +' + test_debug 'git log --graph --decorate --oneline --all' test_expect_success 'merge c1 with c2 and c3' ' @@ -692,4 +724,54 @@ test_expect_success GPG 'merge --no-edit tag should skip editor' ' test_cmp actual expect ' +test_expect_success 'set up mod-256 conflict scenario' ' + # 256 near-identical stanzas... + for i in $(test_seq 1 256); do + for j in 1 2 3 4 5; do + echo $i-$j + done + done >file && + git add file && + git commit -m base && + + # one side changes the first line of each to "master" + sed s/-1/-master/ <file >tmp && + mv tmp file && + git commit -am master && + + # and the other to "side"; merging the two will + # yield 256 separate conflicts + git checkout -b side HEAD^ && + sed s/-1/-side/ <file >tmp && + mv tmp file && + git commit -am side +' + +test_expect_success 'merge detects mod-256 conflicts (recursive)' ' + git reset --hard && + test_must_fail git merge -s recursive master +' + +test_expect_success 'merge detects mod-256 conflicts (resolve)' ' + git reset --hard && + test_must_fail git merge -s resolve master +' + +test_expect_success 'merge nothing into void' ' + git init void && + ( + cd void && + git remote add up .. && + git fetch up && + test_must_fail git merge FETCH_HEAD + ) +' + +test_expect_success 'merge can be completed with --continue' ' + git reset --hard c0 && + git merge --no-ff --no-commit c1 && + git merge --continue && + verify_parents $c0 $c1 +' + test_done diff --git a/t/t7602-merge-octopus-many.sh b/t/t7602-merge-octopus-many.sh index 955f09f8e8..6abe441ae3 100755 --- a/t/t7602-merge-octopus-many.sh +++ b/t/t7602-merge-octopus-many.sh @@ -19,7 +19,7 @@ test_expect_success 'setup' ' git add c$i.c && git commit -m c$i && git tag c$i && - i=`expr $i + 1` || return 1 + i=$(expr $i + 1) || return 1 done ' @@ -30,7 +30,7 @@ test_expect_success 'merge c1 with c2, c3, c4, ... c29' ' while test $i -le 30 do refs="$refs c$i" - i=`expr $i + 1` + i=$(expr $i + 1) done && git merge $refs && test "$(git rev-parse c1)" != "$(git rev-parse HEAD)" && @@ -38,14 +38,14 @@ test_expect_success 'merge c1 with c2, c3, c4, ... c29' ' while test $i -le 30 do test "$(git rev-parse c$i)" = "$(git rev-parse HEAD^$i)" && - i=`expr $i + 1` || return 1 + i=$(expr $i + 1) || return 1 done && git diff --exit-code && i=1 && while test $i -le 30 do test -f c$i.c && - i=`expr $i + 1` || return 1 + i=$(expr $i + 1) || return 1 done ' diff --git a/t/t7605-merge-resolve.sh b/t/t7605-merge-resolve.sh index 0cb9d11f21..5d56c38546 100755 --- a/t/t7605-merge-resolve.sh +++ b/t/t7605-merge-resolve.sh @@ -27,7 +27,7 @@ test_expect_success 'setup' ' git tag c3 ' -test_expect_success 'merge c1 to c2' ' +merge_c1_to_c2_cmds=' git reset --hard c1 && git merge -s resolve c2 && test "$(git rev-parse c1)" != "$(git rev-parse HEAD)" && @@ -41,6 +41,10 @@ test_expect_success 'merge c1 to c2' ' test 3 = $(git ls-files | wc -l) ' +test_expect_success 'merge c1 to c2' "$merge_c1_to_c2_cmds" + +test_expect_success 'merge c1 to c2, again' "$merge_c1_to_c2_cmds" + test_expect_success 'merge c2 to c3 (fails)' ' git reset --hard c2 && test_must_fail git merge -s resolve c3 diff --git a/t/t7607-merge-overwrite.sh b/t/t7607-merge-overwrite.sh index 758a623cdb..9444d6a9b9 100755 --- a/t/t7607-merge-overwrite.sh +++ b/t/t7607-merge-overwrite.sh @@ -115,7 +115,7 @@ cat >expect <<\EOF error: The following untracked working tree files would be overwritten by merge: sub sub2 -Please move or remove them before you can merge. +Please move or remove them before you merge. Aborting EOF @@ -125,7 +125,7 @@ test_expect_success 'will not overwrite untracked file in leading path' ' cp important sub && cp important sub2 && test_must_fail git merge sub 2>out && - test_cmp out expect && + test_i18ncmp out expect && test_path_is_missing .git/MERGE_HEAD && test_cmp important sub && test_cmp important sub2 && diff --git a/t/t7609-merge-co-error-msgs.sh b/t/t7609-merge-co-error-msgs.sh index 0e4a682c64..e90413204e 100755 --- a/t/t7609-merge-co-error-msgs.sh +++ b/t/t7609-merge-co-error-msgs.sh @@ -31,20 +31,20 @@ error: The following untracked working tree files would be overwritten by merge: four three two -Please move or remove them before you can merge. +Please move or remove them before you merge. Aborting EOF test_expect_success 'untracked files overwritten by merge (fast and non-fast forward)' ' test_must_fail git merge branch 2>out && - test_cmp out expect && + test_i18ncmp out expect && git commit --allow-empty -m empty && ( GIT_MERGE_VERBOSITY=0 && export GIT_MERGE_VERBOSITY && test_must_fail git merge branch 2>out2 ) && - test_cmp out2 expect && + test_i18ncmp out2 expect && git reset --hard HEAD^ ' @@ -53,10 +53,10 @@ error: Your local changes to the following files would be overwritten by merge: four three two -Please, commit your changes or stash them before you can merge. +Please commit your changes or stash them before you merge. error: The following untracked working tree files would be overwritten by merge: five -Please move or remove them before you can merge. +Please move or remove them before you merge. Aborting EOF @@ -65,14 +65,14 @@ test_expect_success 'untracked files or local changes ovewritten by merge' ' git add three && git add four && test_must_fail git merge branch 2>out && - test_cmp out expect + test_i18ncmp out expect ' cat >expect <<\EOF error: Your local changes to the following files would be overwritten by checkout: rep/one rep/two -Please, commit your changes or stash them before you can switch branches. +Please commit your changes or stash them before you switch branches. Aborting EOF @@ -87,25 +87,25 @@ test_expect_success 'cannot switch branches because of local changes' ' echo uno >rep/one && echo dos >rep/two && test_must_fail git checkout branch 2>out && - test_cmp out expect + test_i18ncmp out expect ' cat >expect <<\EOF error: Your local changes to the following files would be overwritten by checkout: rep/one rep/two -Please, commit your changes or stash them before you can switch branches. +Please commit your changes or stash them before you switch branches. Aborting EOF test_expect_success 'not uptodate file porcelain checkout error' ' git add rep/one rep/two && test_must_fail git checkout branch 2>out && - test_cmp out expect + test_i18ncmp out expect ' cat >expect <<\EOF -error: Updating the following directories would lose untracked files in it: +error: Updating the following directories would lose untracked files in them: rep rep2 @@ -132,7 +132,7 @@ test_expect_success 'not_uptodate_dir porcelain checkout error' ' >rep/untracked-file && >rep2/untracked-file && test_must_fail git checkout branch 2>out && - test_cmp out ../expect + test_i18ncmp out ../expect ' test_done diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh index 7eeb207b32..381b7df452 100755 --- a/t/t7610-mergetool.sh +++ b/t/t7610-mergetool.sh @@ -55,6 +55,22 @@ test_expect_success 'setup' ' git rm file12 && git commit -m "branch1 changes" && + git checkout -b delete-base branch1 && + mkdir -p a/a && + (echo one; echo two; echo 3; echo 4) >a/a/file.txt && + git add a/a/file.txt && + git commit -m"base file" && + git checkout -b move-to-b delete-base && + mkdir -p b/b && + git mv a/a/file.txt b/b/file.txt && + (echo one; echo two; echo 4) >b/b/file.txt && + git commit -a -m"move to b" && + git checkout -b move-to-c delete-base && + mkdir -p c/c && + git mv a/a/file.txt c/c/file.txt && + (echo one; echo two; echo 3) >c/c/file.txt && + git commit -a -m"move to c" && + git checkout -b stash1 master && echo stash1 change file11 >file11 && git add file11 && @@ -86,6 +102,23 @@ test_expect_success 'setup' ' git rm file11 && git commit -m "master updates" && + git clean -fdx && + git checkout -b order-file-start master && + echo start >a && + echo start >b && + git add a b && + git commit -m start && + git checkout -b order-file-side1 order-file-start && + echo side1 >a && + echo side1 >b && + git add a b && + git commit -m side1 && + git checkout -b order-file-side2 order-file-start && + echo side2 >a && + echo side2 >b && + git add a b && + git commit -m side2 && + git config merge.tool mytool && git config mergetool.mytool.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" && git config mergetool.mytool.trustExitCode true && @@ -94,7 +127,8 @@ test_expect_success 'setup' ' ' test_expect_success 'custom mergetool' ' - git checkout -b test1 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && git submodule update -N && test_must_fail git merge master >/dev/null 2>&1 && ( yes "" | git mergetool both >/dev/null 2>&1 ) && @@ -112,8 +146,13 @@ test_expect_success 'custom mergetool' ' ' test_expect_success 'mergetool crlf' ' + test_when_finished "git reset --hard" && + # This test_config line must go after the above reset line so that + # core.autocrlf is unconfigured before reset runs. (The + # test_config command uses test_when_finished internally and + # test_when_finished is LIFO.) test_config core.autocrlf true && - git checkout -b test2 branch1 && + git checkout -b test$test_count branch1 && test_must_fail git merge master >/dev/null 2>&1 && ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && @@ -128,13 +167,12 @@ test_expect_success 'mergetool crlf' ' test "$(printf x | cat subdir/file3 -)" = "$(printf "master new sub\r\nx")" && git submodule update -N && test "$(cat submod/bar)" = "master submodule" && - git commit -m "branch1 resolved with mergetool - autocrlf" && - test_config core.autocrlf false && - git reset --hard + git commit -m "branch1 resolved with mergetool - autocrlf" ' test_expect_success 'mergetool in subdir' ' - git checkout -b test3 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && git submodule update -N && ( cd subdir && @@ -145,8 +183,13 @@ test_expect_success 'mergetool in subdir' ' ' test_expect_success 'mergetool on file in parent dir' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && + git submodule update -N && ( cd subdir && + test_must_fail git merge master >/dev/null 2>&1 && + ( yes "" | git mergetool file3 >/dev/null 2>&1 ) && ( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) && ( yes "" | git mergetool ../file2 ../spaced\ name >/dev/null 2>&1 ) && ( yes "" | git mergetool ../both >/dev/null 2>&1 ) && @@ -161,7 +204,8 @@ test_expect_success 'mergetool on file in parent dir' ' ' test_expect_success 'mergetool skips autoresolved' ' - git checkout -b test4 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && git submodule update -N && test_must_fail git merge master && test -n "$(git ls-files -u)" && @@ -169,14 +213,34 @@ test_expect_success 'mergetool skips autoresolved' ' ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git reset --hard + test "$output" = "No files need merging" +' + +test_expect_success 'mergetool merges all from subdir (rerere disabled)' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && + test_config rerere.enabled false && + ( + cd subdir && + test_must_fail git merge master && + ( yes "r" | git mergetool ../submod ) && + ( yes "d" "d" | git mergetool --no-prompt ) && + test "$(cat ../file1)" = "master updated" && + test "$(cat ../file2)" = "master new" && + test "$(cat file3)" = "master new sub" && + ( cd .. && git submodule update -N ) && + test "$(cat ../submod/bar)" = "master submodule" && + git commit -m "branch2 resolved by mergetool from subdir" + ) ' -test_expect_success 'mergetool merges all from subdir' ' +test_expect_success 'mergetool merges all from subdir (rerere enabled)' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && + test_config rerere.enabled true && + rm -rf .git/rr-cache && ( cd subdir && - test_config rerere.enabled false && test_must_fail git merge master && ( yes "r" | git mergetool ../submod ) && ( yes "d" "d" | git mergetool --no-prompt ) && @@ -190,20 +254,21 @@ test_expect_success 'mergetool merges all from subdir' ' ' test_expect_success 'mergetool skips resolved paths when rerere is active' ' + test_when_finished "git reset --hard" && test_config rerere.enabled true && rm -rf .git/rr-cache && - git checkout -b test5 branch1 && + git checkout -b test$test_count branch1 && git submodule update -N && test_must_fail git merge master >/dev/null 2>&1 && ( yes "l" | git mergetool --no-prompt submod >/dev/null 2>&1 ) && ( yes "d" "d" | git mergetool --no-prompt >/dev/null 2>&1 ) && git submodule update -N && output="$(yes "n" | git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git reset --hard + test "$output" = "No files need merging" ' test_expect_success 'conflicted stash sets up rerere' ' + test_when_finished "git reset --hard" && test_config rerere.enabled true && git checkout stash1 && echo "Conflicting stash content" >file11 && @@ -231,25 +296,78 @@ test_expect_success 'conflicted stash sets up rerere' ' ' test_expect_success 'mergetool takes partial path' ' - git reset --hard && + test_when_finished "git reset --hard" && test_config rerere.enabled false && - git checkout -b test12 branch1 && + git checkout -b test$test_count branch1 && git submodule update -N && test_must_fail git merge master && ( yes "" | git mergetool subdir ) && - test "$(cat subdir/file3)" = "master new sub" && - git reset --hard + test "$(cat subdir/file3)" = "master new sub" +' + +test_expect_success 'mergetool delete/delete conflict' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count move-to-c && + test_must_fail git merge move-to-b && + echo d | git mergetool a/a/file.txt && + ! test -f a/a/file.txt && + git reset --hard && + test_must_fail git merge move-to-b && + echo m | git mergetool a/a/file.txt && + test -f b/b/file.txt && + git reset --hard && + test_must_fail git merge move-to-b && + ! echo a | git mergetool a/a/file.txt && + ! test -f a/a/file.txt +' + +test_expect_success 'mergetool produces no errors when keepBackup is used' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count move-to-c && + test_config mergetool.keepBackup true && + test_must_fail git merge move-to-b && + : >expect && + echo d | git mergetool a/a/file.txt 2>actual && + test_cmp expect actual && + ! test -d a +' + +test_expect_success 'mergetool honors tempfile config for deleted files' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count move-to-c && + test_config mergetool.keepTemporaries false && + test_must_fail git merge move-to-b && + echo d | git mergetool a/a/file.txt && + ! test -d a +' + +test_expect_success 'mergetool keeps tempfiles when aborting delete/delete' ' + test_when_finished "git reset --hard" && + test_when_finished "git clean -fdx" && + git checkout -b test$test_count move-to-c && + test_config mergetool.keepTemporaries true && + test_must_fail git merge move-to-b && + ! (echo a; echo n) | git mergetool a/a/file.txt && + test -d a/a && + cat >expect <<-\EOF && + file_BASE_.txt + file_LOCAL_.txt + file_REMOTE_.txt + EOF + ls -1 a/a | sed -e "s/[0-9]*//g" >actual && + test_cmp expect actual ' test_expect_success 'deleted vs modified submodule' ' - git checkout -b test6 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && git submodule update -N && mv submod submod-movedaside && git rm --cached submod && git commit -m "Submodule deleted from branch" && - git checkout -b test6.a test6 && + git checkout -b test$test_count.a test$test_count && test_must_fail git merge master && test -n "$(git ls-files -u)" && ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && @@ -265,7 +383,7 @@ test_expect_success 'deleted vs modified submodule' ' git commit -m "Merge resolved by keeping module" && mv submod submod-movedaside && - git checkout -b test6.b test6 && + git checkout -b test$test_count.b test$test_count && git submodule update -N && test_must_fail git merge master && test -n "$(git ls-files -u)" && @@ -279,9 +397,9 @@ test_expect_success 'deleted vs modified submodule' ' git commit -m "Merge resolved by deleting module" && mv submod-movedaside submod && - git checkout -b test6.c master && + git checkout -b test$test_count.c master && git submodule update -N && - test_must_fail git merge test6 && + test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && ( yes "" | git mergetool both >/dev/null 2>&1 ) && @@ -295,9 +413,9 @@ test_expect_success 'deleted vs modified submodule' ' git commit -m "Merge resolved by deleting module" && mv submod.orig submod && - git checkout -b test6.d master && + git checkout -b test$test_count.d master && git submodule update -N && - test_must_fail git merge test6 && + test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && ( yes "" | git mergetool both >/dev/null 2>&1 ) && @@ -308,19 +426,19 @@ test_expect_success 'deleted vs modified submodule' ' test "$(cat submod/bar)" = "master submodule" && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && - git commit -m "Merge resolved by keeping module" && - git reset --hard HEAD + git commit -m "Merge resolved by keeping module" ' test_expect_success 'file vs modified submodule' ' - git checkout -b test7 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && git submodule update -N && mv submod submod-movedaside && git rm --cached submod && echo not a submodule >submod && git add submod && git commit -m "Submodule path becomes file" && - git checkout -b test7.a branch1 && + git checkout -b test$test_count.a branch1 && test_must_fail git merge master && test -n "$(git ls-files -u)" && ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && @@ -336,7 +454,7 @@ test_expect_success 'file vs modified submodule' ' git commit -m "Merge resolved by keeping module" && mv submod submod-movedaside && - git checkout -b test7.b test7 && + git checkout -b test$test_count.b test$test_count && test_must_fail git merge master && test -n "$(git ls-files -u)" && ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && @@ -349,11 +467,11 @@ test_expect_success 'file vs modified submodule' ' test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping file" && - git checkout -b test7.c master && + git checkout -b test$test_count.c master && rmdir submod && mv submod-movedaside submod && test ! -e submod.orig && git submodule update -N && - test_must_fail git merge test7 && + test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && ( yes "" | git mergetool both >/dev/null 2>&1 ) && @@ -366,10 +484,10 @@ test_expect_success 'file vs modified submodule' ' test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping file" && - git checkout -b test7.d master && + git checkout -b test$test_count.d master && rmdir submod && mv submod.orig submod && git submodule update -N && - test_must_fail git merge test7 && + test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && ( yes "" | git mergetool both>/dev/null 2>&1 ) && @@ -384,7 +502,8 @@ test_expect_success 'file vs modified submodule' ' ' test_expect_success 'submodule in subdirectory' ' - git checkout -b test10 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && git submodule update -N && ( cd subdir && @@ -396,56 +515,57 @@ test_expect_success 'submodule in subdirectory' ' git commit -m "add initial versions" ) ) && + test_when_finished "rm -rf subdir/subdir_module" && git submodule add git://example.com/subsubmodule subdir/subdir_module && git add subdir/subdir_module && git commit -m "add submodule in subdirectory" && - git checkout -b test10.a test10 && + git checkout -b test$test_count.a test$test_count && git submodule update -N && ( cd subdir/subdir_module && git checkout -b super10.a && - echo test10.a >file15 && + echo test$test_count.a >file15 && git add file15 && git commit -m "on branch 10.a" ) && git add subdir/subdir_module && - git commit -m "change submodule in subdirectory on test10.a" && + git commit -m "change submodule in subdirectory on test$test_count.a" && - git checkout -b test10.b test10 && + git checkout -b test$test_count.b test$test_count && git submodule update -N && ( cd subdir/subdir_module && git checkout -b super10.b && - echo test10.b >file15 && + echo test$test_count.b >file15 && git add file15 && git commit -m "on branch 10.b" ) && git add subdir/subdir_module && - git commit -m "change submodule in subdirectory on test10.b" && + git commit -m "change submodule in subdirectory on test$test_count.b" && - test_must_fail git merge test10.a >/dev/null 2>&1 && + test_must_fail git merge test$test_count.a >/dev/null 2>&1 && ( cd subdir && ( yes "l" | git mergetool subdir_module ) ) && - test "$(cat subdir/subdir_module/file15)" = "test10.b" && + test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && git submodule update -N && - test "$(cat subdir/subdir_module/file15)" = "test10.b" && + test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && git reset --hard && git submodule update -N && - test_must_fail git merge test10.a >/dev/null 2>&1 && + test_must_fail git merge test$test_count.a >/dev/null 2>&1 && ( yes "r" | git mergetool subdir/subdir_module ) && - test "$(cat subdir/subdir_module/file15)" = "test10.b" && + test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && git submodule update -N && - test "$(cat subdir/subdir_module/file15)" = "test10.a" && - git commit -m "branch1 resolved with mergetool" && - rm -rf subdir/subdir_module + test "$(cat subdir/subdir_module/file15)" = "test$test_count.a" && + git commit -m "branch1 resolved with mergetool" ' test_expect_success 'directory vs modified submodule' ' - git checkout -b test11 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && mv submod submod-movedaside && git rm --cached submod && mkdir submod && @@ -459,7 +579,7 @@ test_expect_success 'directory vs modified submodule' ' test "$(cat submod/file16)" = "not a submodule" && rm -rf submod.orig && - git reset --hard >/dev/null 2>&1 && + git reset --hard && test_must_fail git merge master && test -n "$(git ls-files -u)" && test ! -e submod.orig && @@ -471,70 +591,131 @@ test_expect_success 'directory vs modified submodule' ' ( cd submod && git clean -f && git reset --hard ) && git submodule update -N && test "$(cat submod/bar)" = "master submodule" && - git reset --hard >/dev/null 2>&1 && rm -rf submod-movedaside && + git reset --hard && + rm -rf submod-movedaside && - git checkout -b test11.c master && + git checkout -b test$test_count.c master && git submodule update -N && - test_must_fail git merge test11 && + test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && ( yes "l" | git mergetool submod ) && git submodule update -N && test "$(cat submod/bar)" = "master submodule" && - git reset --hard >/dev/null 2>&1 && + git reset --hard && git submodule update -N && - test_must_fail git merge test11 && + test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && test ! -e submod.orig && ( yes "r" | git mergetool submod ) && test "$(cat submod/file16)" = "not a submodule" && - git reset --hard master >/dev/null 2>&1 && + git reset --hard master && ( cd submod && git clean -f && git reset --hard ) && git submodule update -N ' test_expect_success 'file with no base' ' - git checkout -b test13 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && test_must_fail git merge master && git mergetool --no-prompt --tool mybase -- both && >expected && - test_cmp both expected && - git reset --hard master >/dev/null 2>&1 + test_cmp both expected ' test_expect_success 'custom commands override built-ins' ' - git checkout -b test14 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && test_config mergetool.defaults.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" && test_config mergetool.defaults.trustExitCode true && test_must_fail git merge master && git mergetool --no-prompt --tool defaults -- both && echo master both added >expected && - test_cmp both expected && - git reset --hard master >/dev/null 2>&1 + test_cmp both expected ' test_expect_success 'filenames seen by tools start with ./' ' - git checkout -b test15 branch1 && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && test_config mergetool.writeToTemp false && test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" && test_config mergetool.myecho.trustExitCode true && test_must_fail git merge master && git mergetool --no-prompt --tool myecho -- both >actual && - grep ^\./both_LOCAL_ actual >/dev/null && - git reset --hard master >/dev/null 2>&1 + grep ^\./both_LOCAL_ actual >/dev/null +' + +test_lazy_prereq MKTEMP ' + tempdir=$(mktemp -d -t foo.XXXXXX) && + test -d "$tempdir" && + rmdir "$tempdir" ' -test_expect_success 'temporary filenames are used with mergetool.writeToTemp' ' - git checkout -b test16 branch1 && +test_expect_success MKTEMP 'temporary filenames are used with mergetool.writeToTemp' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && test_config mergetool.writeToTemp true && test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" && test_config mergetool.myecho.trustExitCode true && test_must_fail git merge master && git mergetool --no-prompt --tool myecho -- both >actual && - test_must_fail grep ^\./both_LOCAL_ actual >/dev/null && - grep /both_LOCAL_ actual >/dev/null && - git reset --hard master >/dev/null 2>&1 + ! grep ^\./both_LOCAL_ actual >/dev/null && + grep /both_LOCAL_ actual >/dev/null +' + +test_expect_success 'diff.orderFile configuration is honored' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count order-file-side2 && + test_config diff.orderFile order-file && + test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" && + test_config mergetool.myecho.trustExitCode true && + echo b >order-file && + echo a >>order-file && + test_must_fail git merge order-file-side1 && + cat >expect <<-\EOF && + Merging: + b + a + EOF + + # make sure "order-file" that is ambiguous between + # rev and path is understood correctly. + git branch order-file HEAD && + + git mergetool --no-prompt --tool myecho >output && + git grep --no-index -h -A2 Merging: output >actual && + test_cmp expect actual +' +test_expect_success 'mergetool -Oorder-file is honored' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count order-file-side2 && + test_config diff.orderFile order-file && + test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" && + test_config mergetool.myecho.trustExitCode true && + echo b >order-file && + echo a >>order-file && + test_must_fail git merge order-file-side1 && + cat >expect <<-\EOF && + Merging: + a + b + EOF + git mergetool -O/dev/null --no-prompt --tool myecho >output && + git grep --no-index -h -A2 Merging: output >actual && + test_cmp expect actual && + git reset --hard && + + git config --unset diff.orderFile && + test_must_fail git merge order-file-side1 && + cat >expect <<-\EOF && + Merging: + b + a + EOF + git mergetool -Oorder-file --no-prompt --tool myecho >output && + git grep --no-index -h -A2 Merging: output >actual && + test_cmp expect actual ' test_done diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 021c5479bd..6061a04147 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -69,7 +69,7 @@ test_expect_success 'writing bitmaps via config can duplicate .keep objects' ' test_expect_success 'loose objects in alternate ODB are not repacked' ' mkdir alt_objects && - echo `pwd`/alt_objects > .git/objects/info/alternates && + echo $(pwd)/alt_objects > .git/objects/info/alternates && echo content3 > file3 && objsha1=$(GIT_OBJECT_DIRECTORY=alt_objects git hash-object -w file3) && git add file3 && @@ -168,7 +168,7 @@ test_expect_success 'packed unreachable obs in alternate ODB are not loosened' ' ' test_expect_success 'local packed unreachable obs that exist in alternate ODB are not loosened' ' - echo `pwd`/alt_objects > .git/objects/info/alternates && + echo $(pwd)/alt_objects > .git/objects/info/alternates && echo "$csha1" | git pack-objects --non-empty --all --reflog pack && rm -f .git/objects/pack/* && mv pack-* .git/objects/pack/ && diff --git a/t/t7701-repack-unpack-unreachable.sh b/t/t7701-repack-unpack-unreachable.sh index b66e383866..987573c41f 100755 --- a/t/t7701-repack-unpack-unreachable.sh +++ b/t/t7701-repack-unpack-unreachable.sh @@ -122,4 +122,32 @@ test_expect_success 'keep packed objects found only in index' ' git cat-file blob :file ' +test_expect_success 'repack -k keeps unreachable packed objects' ' + # create packed-but-unreachable object + sha1=$(echo unreachable-packed | git hash-object -w --stdin) && + pack=$(echo $sha1 | git pack-objects .git/objects/pack/pack) && + git prune-packed && + + # -k should keep it + git repack -adk && + git cat-file -p $sha1 && + + # and double check that without -k it would have been removed + git repack -ad && + test_must_fail git cat-file -p $sha1 +' + +test_expect_success 'repack -k packs unreachable loose objects' ' + # create loose unreachable object + sha1=$(echo would-be-deleted-loose | git hash-object -w --stdin) && + objpath=.git/objects/$(echo $sha1 | sed "s,..,&/,") && + test_path_is_file $objpath && + + # and confirm that the loose object goes away, but we can + # still access it (ergo, it is packed) + git repack -adk && + test_path_is_missing $objpath && + git cat-file -p $sha1 +' + test_done diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index ea35a0241c..99d4123461 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -20,7 +20,7 @@ difftool_test_setup () prompt_given () { prompt="$1" - test "$prompt" = "Launch 'test-tool' [Y/n]: branch" + test "$prompt" = "Launch 'test-tool' [Y/n]? branch" } # Create a file on master and change it on branch @@ -124,6 +124,12 @@ test_expect_success PERL 'difftool stops on error with --trust-exit-code' ' test_cmp expect actual ' +test_expect_success PERL 'difftool honors exit status if command not found' ' + test_config difftool.nonexistent.cmd i-dont-exist && + test_config difftool.trustExitCode false && + test_must_fail git difftool -y -t nonexistent branch +' + test_expect_success PERL 'difftool honors --gui' ' difftool_test_setup && test_config merge.tool bogus-tool && @@ -368,6 +374,7 @@ test_expect_success PERL 'setup change in subdirectory' ' echo master >sub/sub && git add sub/sub && git commit -m "added sub/sub" && + git tag v1 && echo test >>file && echo test >>sub/sub && git add file sub/sub && @@ -403,12 +410,63 @@ run_dir_diff_test 'difftool --dir-diff ignores --prompt' ' grep file output ' -run_dir_diff_test 'difftool --dir-diff from subdirectory' ' +run_dir_diff_test 'difftool --dir-diff branch from subdirectory' ' ( cd sub && git difftool --dir-diff $symlinks --extcmd ls branch >output && + # "sub" must only exist in "right" + # "file" and "file2" must be listed in both "left" and "right" + test "1" = $(grep sub output | wc -l) && + test "2" = $(grep file"$" output | wc -l) && + test "2" = $(grep file2 output | wc -l) + ) +' + +run_dir_diff_test 'difftool --dir-diff v1 from subdirectory' ' + ( + cd sub && + git difftool --dir-diff $symlinks --extcmd ls v1 >output && + # "sub" and "file" exist in both v1 and HEAD. + # "file2" is unchanged. + test "2" = $(grep sub output | wc -l) && + test "2" = $(grep file output | wc -l) && + test "0" = $(grep file2 output | wc -l) + ) +' + +run_dir_diff_test 'difftool --dir-diff branch from subdirectory w/ pathspec' ' + ( + cd sub && + git difftool --dir-diff $symlinks --extcmd ls branch -- .>output && + # "sub" only exists in "right" + # "file" and "file2" must not be listed + test "1" = $(grep sub output | wc -l) && + test "0" = $(grep file output | wc -l) + ) +' + +run_dir_diff_test 'difftool --dir-diff v1 from subdirectory w/ pathspec' ' + ( + cd sub && + git difftool --dir-diff $symlinks --extcmd ls v1 -- .>output && + # "sub" exists in v1 and HEAD + # "file" is filtered out by the pathspec + test "2" = $(grep sub output | wc -l) && + test "0" = $(grep file output | wc -l) + ) +' + +run_dir_diff_test 'difftool --dir-diff from subdirectory with GIT_DIR set' ' + ( + GIT_DIR=$(pwd)/.git && + export GIT_DIR && + GIT_WORK_TREE=$(pwd) && + export GIT_WORK_TREE && + cd sub && + git difftool --dir-diff $symlinks --extcmd ls \ + branch -- sub >output && grep sub output && - grep file output + ! grep file output ) ' @@ -419,22 +477,45 @@ run_dir_diff_test 'difftool --dir-diff when worktree file is missing' ' grep file2 output ' +run_dir_diff_test 'difftool --dir-diff with unmerged files' ' + test_when_finished git reset --hard && + test_config difftool.echo.cmd "echo ok" && + git checkout -B conflict-a && + git checkout -B conflict-b && + git checkout conflict-a && + echo a >>file && + git add file && + git commit -m conflict-a && + git checkout conflict-b && + echo b >>file && + git add file && + git commit -m conflict-b && + git checkout master && + git merge conflict-a && + test_must_fail git merge conflict-b && + cat >expect <<-EOF && + ok + EOF + git difftool --dir-diff $symlinks -t echo >actual && + test_cmp expect actual +' + write_script .git/CHECK_SYMLINKS <<\EOF for f in file file2 sub/sub do echo "$f" - readlink "$2/$f" + ls -ld "$2/$f" | sed -e 's/.* -> //' done >actual EOF test_expect_success PERL,SYMLINKS 'difftool --dir-diff --symlink without unstaged changes' ' cat >expect <<-EOF && file - $(pwd)/file + $PWD/file file2 - $(pwd)/file2 + $PWD/file2 sub/sub - $(pwd)/sub/sub + $PWD/sub/sub EOF git difftool --dir-diff --symlink \ --extcmd "./.git/CHECK_SYMLINKS" branch HEAD && @@ -448,14 +529,14 @@ EOF run_dir_diff_test 'difftool --dir-diff syncs worktree with unstaged change' ' test_when_finished git reset --hard && echo "orig content" >file && - git difftool -d $symlinks --extcmd "$(pwd)/modify-right-file" branch && + git difftool -d $symlinks --extcmd "$PWD/modify-right-file" branch && echo "new content" >expect && test_cmp expect file ' run_dir_diff_test 'difftool --dir-diff syncs worktree without unstaged change' ' test_when_finished git reset --hard && - git difftool -d $symlinks --extcmd "$(pwd)/modify-right-file" branch && + git difftool -d $symlinks --extcmd "$PWD/modify-right-file" branch && echo "new content" >expect && test_cmp expect file ' @@ -466,7 +547,7 @@ EOF test_expect_success PERL 'difftool --no-symlinks does not overwrite working tree file ' ' echo "orig content" >file && - git difftool --dir-diff --no-symlinks --extcmd "$(pwd)/modify-file" branch && + git difftool --dir-diff --no-symlinks --extcmd "$PWD/modify-file" branch && echo "new content" >expect && test_cmp expect file ' @@ -482,7 +563,7 @@ test_expect_success PERL 'difftool --no-symlinks detects conflict ' ' TMPDIR=$TRASH_DIRECTORY && export TMPDIR && echo "orig content" >file && - test_must_fail git difftool --dir-diff --no-symlinks --extcmd "$(pwd)/modify-both-files" branch && + test_must_fail git difftool --dir-diff --no-symlinks --extcmd "$PWD/modify-both-files" branch && echo "wt content" >expect && test_cmp expect file && echo "tmp content" >expect && @@ -492,12 +573,31 @@ test_expect_success PERL 'difftool --no-symlinks detects conflict ' ' test_expect_success PERL 'difftool properly honors gitlink and core.worktree' ' git submodule add ./. submod/ule && + test_config -C submod/ule diff.tool checktrees && + test_config -C submod/ule difftool.checktrees.cmd '\'' + test -d "$LOCAL" && test -d "$REMOTE" && echo good + '\'' && ( cd submod/ule && - test_config diff.tool checktrees && - test_config difftool.checktrees.cmd '\'' - test -d "$LOCAL" && test -d "$REMOTE" && echo good - '\'' && + echo good >expect && + git difftool --tool=checktrees --dir-diff HEAD~ >actual && + test_cmp expect actual + ) +' + +test_expect_success PERL,SYMLINKS 'difftool --dir-diff symlinked directories' ' + git init dirlinks && + ( + cd dirlinks && + git config diff.tool checktrees && + git config difftool.checktrees.cmd "echo good" && + mkdir foo && + : >foo/bar && + git add foo/bar && + test_commit symlink-one && + ln -s foo link && + git add link && + test_commit symlink-two && echo good >expect && git difftool --tool=checktrees --dir-diff HEAD~ >actual && test_cmp expect actual diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 028ffe4a05..19f0108f8a 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -9,7 +9,9 @@ test_description='git grep various. . ./test-lib.sh cat >hello.c <<EOF +#include <assert.h> #include <stdio.h> + int main(int argc, const char **argv) { printf("Hello world.\n"); @@ -37,6 +39,10 @@ test_expect_success setup ' echo "a+bc" echo "abc" } >ab && + { + echo d && + echo 0 + } >d0 && echo vvv >v && echo ww w >w && echo x x xx x >x && @@ -175,7 +181,7 @@ do test_expect_success "grep -c $L (no /dev/null)" ' ! git grep -c test $H | grep /dev/null - ' + ' test_expect_success "grep --max-depth -1 $L" ' { @@ -353,7 +359,7 @@ test_expect_success 'grep -l -C' ' cat >expected <<EOF file:5 EOF -test_expect_success 'grep -l -C' ' +test_expect_success 'grep -c -C' ' git grep -c -C1 foo >actual && test_cmp expected actual ' @@ -579,7 +585,7 @@ test_expect_success 'log grep (9)' ' ' test_expect_success 'log grep (9)' ' - git log -g --grep-reflog="commit: third" --author="non-existant" --pretty=tformat:%s >actual && + git log -g --grep-reflog="commit: third" --author="non-existent" --pretty=tformat:%s >actual && : >expect && test_cmp expect actual ' @@ -715,6 +721,7 @@ test_expect_success 'grep -p' ' cat >expected <<EOF hello.c-#include <stdio.h> +hello.c- hello.c=int main(int argc, const char **argv) hello.c-{ hello.c- printf("Hello world.\n"); @@ -741,6 +748,16 @@ test_expect_success 'grep -W' ' ' cat >expected <<EOF +hello.c-#include <assert.h> +hello.c:#include <stdio.h> +EOF + +test_expect_success 'grep -W shows no trailing empty lines' ' + git grep -W stdio >actual && + test_cmp expected actual +' + +cat >expected <<EOF hello.c= printf("Hello world.\n"); hello.c: return 0; hello.c- /* char ?? */ @@ -791,12 +808,12 @@ test_expect_success 'outside of git repository' ' } >non/expect.full && echo file2:world >non/expect.sub && ( - GIT_CEILING_DIRECTORIES="$(pwd)/non/git" && + GIT_CEILING_DIRECTORIES="$(pwd)/non" && export GIT_CEILING_DIRECTORIES && cd non/git && test_must_fail git grep o && git grep --no-index o >../actual.full && - test_cmp ../expect.full ../actual.full + test_cmp ../expect.full ../actual.full && cd sub && test_must_fail git grep o && git grep --no-index o >../../actual.sub && @@ -805,7 +822,7 @@ test_expect_success 'outside of git repository' ' echo ".*o*" >non/git/.gitignore && ( - GIT_CEILING_DIRECTORIES="$(pwd)/non/git" && + GIT_CEILING_DIRECTORIES="$(pwd)/non" && export GIT_CEILING_DIRECTORIES && cd non/git && test_must_fail git grep o && @@ -813,7 +830,7 @@ test_expect_success 'outside of git repository' ' test_cmp ../expect.full ../actual.full && { - echo ".gitignore:.*o*" + echo ".gitignore:.*o*" && cat ../expect.full } >../expect.with.ignored && git grep --no-index --no-exclude o >../actual.full && @@ -821,6 +838,47 @@ test_expect_success 'outside of git repository' ' ) ' +test_expect_success 'outside of git repository with fallbackToNoIndex' ' + rm -fr non && + mkdir -p non/git/sub && + echo hello >non/git/file1 && + echo world >non/git/sub/file2 && + cat <<-\EOF >non/expect.full && + file1:hello + sub/file2:world + EOF + echo file2:world >non/expect.sub && + ( + GIT_CEILING_DIRECTORIES="$(pwd)/non" && + export GIT_CEILING_DIRECTORIES && + cd non/git && + test_must_fail git -c grep.fallbackToNoIndex=false grep o && + git -c grep.fallbackToNoIndex=true grep o >../actual.full && + test_cmp ../expect.full ../actual.full && + cd sub && + test_must_fail git -c grep.fallbackToNoIndex=false grep o && + git -c grep.fallbackToNoIndex=true grep o >../../actual.sub && + test_cmp ../../expect.sub ../../actual.sub + ) && + + echo ".*o*" >non/git/.gitignore && + ( + GIT_CEILING_DIRECTORIES="$(pwd)/non" && + export GIT_CEILING_DIRECTORIES && + cd non/git && + test_must_fail git -c grep.fallbackToNoIndex=false grep o && + git -c grep.fallbackToNoIndex=true grep --exclude-standard o >../actual.full && + test_cmp ../expect.full ../actual.full && + + { + echo ".gitignore:.*o*" && + cat ../expect.full + } >../expect.with.ignored && + git -c grep.fallbackToNoIndex grep --no-exclude o >../actual.full && + test_cmp ../expect.with.ignored ../actual.full + ) +' + test_expect_success 'inside git repository but with --no-index' ' rm -fr is && mkdir -p is/git/sub && @@ -864,6 +922,33 @@ test_expect_success 'inside git repository but with --no-index' ' ) ' +test_expect_success 'grep --no-index descends into repos, but not .git' ' + rm -fr non && + mkdir -p non/git && + ( + GIT_CEILING_DIRECTORIES="$(pwd)/non" && + export GIT_CEILING_DIRECTORIES && + cd non/git && + + echo magic >file && + git init repo && + ( + cd repo && + echo magic >file && + git add file && + git commit -m foo && + echo magic >.git/file + ) && + + cat >expect <<-\EOF && + file + repo/file + EOF + git grep -l --no-index magic >actual && + test_cmp expect actual + ) +' + test_expect_success 'setup double-dash tests' ' cat >double-dash <<EOF && -- @@ -1024,36 +1109,36 @@ test_expect_success 'grep pattern with grep.patternType=fixed, =basic, =extended ' test_expect_success 'grep -G -F -P -E pattern' ' - >empty && - test_must_fail git grep -G -F -P -E "a\x{2b}b\x{2a}c" ab >actual && - test_cmp empty actual + echo "d0:d" >expected && + git grep -G -F -P -E "[\d]" d0 >actual && + test_cmp expected actual ' test_expect_success 'grep pattern with grep.patternType=fixed, =basic, =perl, =extended' ' - >empty && - test_must_fail git \ + echo "d0:d" >expected && + git \ -c grep.patterntype=fixed \ -c grep.patterntype=basic \ -c grep.patterntype=perl \ -c grep.patterntype=extended \ - grep "a\x{2b}b\x{2a}c" ab >actual && - test_cmp empty actual + grep "[\d]" d0 >actual && + test_cmp expected actual ' test_expect_success LIBPCRE 'grep -G -F -E -P pattern' ' - echo "ab:a+b*c" >expected && - git grep -G -F -E -P "a\x{2b}b\x{2a}c" ab >actual && + echo "d0:0" >expected && + git grep -G -F -E -P "[\d]" d0 >actual && test_cmp expected actual ' test_expect_success LIBPCRE 'grep pattern with grep.patternType=fixed, =basic, =extended, =perl' ' - echo "ab:a+b*c" >expected && + echo "d0:0" >expected && git \ -c grep.patterntype=fixed \ -c grep.patterntype=basic \ -c grep.patterntype=extended \ -c grep.patterntype=perl \ - grep "a\x{2b}b\x{2a}c" ab >actual && + grep "[\d]" d0 >actual && test_cmp expected actual ' @@ -1164,8 +1249,8 @@ test_expect_success 'grep --heading' ' cat >expected <<EOF <BOLD;GREEN>hello.c<RESET> -2:int main(int argc, const <BLACK;BYELLOW>char<RESET> **argv) -6: /* <BLACK;BYELLOW>char<RESET> ?? */ +4:int main(int argc, const <BLACK;BYELLOW>char<RESET> **argv) +8: /* <BLACK;BYELLOW>char<RESET> ?? */ <BOLD;GREEN>hello_world<RESET> 3:Hel<BLACK;BYELLOW>lo_w<RESET>orld @@ -1272,7 +1357,7 @@ test_expect_success 'grep --color -e A --and --not -e B with context' ' ' cat >expected <<EOF -hello.c-#include <stdio.h> +hello.c- hello.c=int main(int argc, const char **argv) hello.c-{ hello.c: pr<RED>int<RESET>f("<RED>Hello<RESET> world.\n"); @@ -1296,4 +1381,62 @@ test_expect_success 'grep --color -e A --and -e B -p with context' ' test_cmp expected actual ' +test_expect_success 'grep can find things only in the work tree' ' + : >work-tree-only && + git add work-tree-only && + test_when_finished "git rm -f work-tree-only" && + echo "find in work tree" >work-tree-only && + git grep --quiet "find in work tree" && + test_must_fail git grep --quiet --cached "find in work tree" && + test_must_fail git grep --quiet "find in work tree" HEAD +' + +test_expect_success 'grep can find things only in the work tree (i-t-a)' ' + echo "intend to add this" >intend-to-add && + git add -N intend-to-add && + test_when_finished "git rm -f intend-to-add" && + git grep --quiet "intend to add this" && + test_must_fail git grep --quiet --cached "intend to add this" && + test_must_fail git grep --quiet "intend to add this" HEAD +' + +test_expect_success 'grep does not search work tree with assume unchanged' ' + echo "intend to add this" >intend-to-add && + git add -N intend-to-add && + git update-index --assume-unchanged intend-to-add && + test_when_finished "git rm -f intend-to-add" && + test_must_fail git grep --quiet "intend to add this" && + test_must_fail git grep --quiet --cached "intend to add this" && + test_must_fail git grep --quiet "intend to add this" HEAD +' + +test_expect_success 'grep can find things only in the index' ' + echo "only in the index" >cache-this && + git add cache-this && + rm cache-this && + test_when_finished "git rm --cached cache-this" && + test_must_fail git grep --quiet "only in the index" && + git grep --quiet --cached "only in the index" && + test_must_fail git grep --quiet "only in the index" HEAD +' + +test_expect_success 'grep does not report i-t-a with -L --cached' ' + echo "intend to add this" >intend-to-add && + git add -N intend-to-add && + test_when_finished "git rm -f intend-to-add" && + git ls-files | grep -v "^intend-to-add\$" >expected && + git grep -L --cached "nonexistent_string" >actual && + test_cmp expected actual +' + +test_expect_success 'grep does not report i-t-a and assume unchanged with -L' ' + echo "intend to add this" >intend-to-add-assume-unchanged && + git add -N intend-to-add-assume-unchanged && + test_when_finished "git rm -f intend-to-add-assume-unchanged" && + git update-index --assume-unchanged intend-to-add-assume-unchanged && + git ls-files | grep -v "^intend-to-add-assume-unchanged\$" >expected && + git grep -L "nonexistent_string" >actual && + test_cmp expected actual +' + test_done diff --git a/t/t7812-grep-icase-non-ascii.sh b/t/t7812-grep-icase-non-ascii.sh new file mode 100755 index 0000000000..169fd8d706 --- /dev/null +++ b/t/t7812-grep-icase-non-ascii.sh @@ -0,0 +1,71 @@ +#!/bin/sh + +test_description='grep icase on non-English locales' + +. ./lib-gettext.sh + +test_expect_success GETTEXT_LOCALE 'setup' ' + test_write_lines "TILRAUN: Halló Heimur!" >file && + git add file && + LC_ALL="$is_IS_locale" && + export LC_ALL +' + +test_have_prereq GETTEXT_LOCALE && +test-regex "HALLÓ" "Halló" ICASE && +test_set_prereq REGEX_LOCALE + +test_expect_success REGEX_LOCALE 'grep literal string, no -F' ' + git grep -i "TILRAUN: Halló Heimur!" && + git grep -i "TILRAUN: HALLÓ HEIMUR!" +' + +test_expect_success GETTEXT_LOCALE,LIBPCRE 'grep pcre utf-8 icase' ' + git grep --perl-regexp "TILRAUN: H.lló Heimur!" && + git grep --perl-regexp -i "TILRAUN: H.lló Heimur!" && + git grep --perl-regexp -i "TILRAUN: H.LLÓ HEIMUR!" +' + +test_expect_success GETTEXT_LOCALE,LIBPCRE 'grep pcre utf-8 string with "+"' ' + test_write_lines "TILRAUN: Hallóó Heimur!" >file2 && + git add file2 && + git grep -l --perl-regexp "TILRAUN: H.lló+ Heimur!" >actual && + echo file >expected && + echo file2 >>expected && + test_cmp expected actual +' + +test_expect_success REGEX_LOCALE 'grep literal string, with -F' ' + git grep --debug -i -F "TILRAUN: Halló Heimur!" 2>&1 >/dev/null | + grep fixed >debug1 && + test_write_lines "fixed TILRAUN: Halló Heimur!" >expect1 && + test_cmp expect1 debug1 && + + git grep --debug -i -F "TILRAUN: HALLÓ HEIMUR!" 2>&1 >/dev/null | + grep fixed >debug2 && + test_write_lines "fixed TILRAUN: HALLÓ HEIMUR!" >expect2 && + test_cmp expect2 debug2 +' + +test_expect_success REGEX_LOCALE 'grep string with regex, with -F' ' + test_write_lines "^*TILR^AUN:.* \\Halló \$He[]imur!\$" >file && + + git grep --debug -i -F "^*TILR^AUN:.* \\Halló \$He[]imur!\$" 2>&1 >/dev/null | + grep fixed >debug1 && + test_write_lines "fixed \\^*TILR^AUN:\\.\\* \\\\Halló \$He\\[]imur!\\\$" >expect1 && + test_cmp expect1 debug1 && + + git grep --debug -i -F "^*TILR^AUN:.* \\HALLÓ \$HE[]IMUR!\$" 2>&1 >/dev/null | + grep fixed >debug2 && + test_write_lines "fixed \\^*TILR^AUN:\\.\\* \\\\HALLÓ \$HE\\[]IMUR!\\\$" >expect2 && + test_cmp expect2 debug2 +' + +test_expect_success REGEX_LOCALE 'pickaxe -i on non-ascii' ' + git commit -m first && + git log --format=%f -i -S"TILRAUN: HALLÓ HEIMUR!" >actual && + echo first >expected && + test_cmp expected actual +' + +test_done diff --git a/t/t7813-grep-icase-iso.sh b/t/t7813-grep-icase-iso.sh new file mode 100755 index 0000000000..efef7fb81f --- /dev/null +++ b/t/t7813-grep-icase-iso.sh @@ -0,0 +1,19 @@ +#!/bin/sh + +test_description='grep icase on non-English locales' + +. ./lib-gettext.sh + +test_expect_success GETTEXT_ISO_LOCALE 'setup' ' + printf "TILRAUN: Halló Heimur!" >file && + git add file && + LC_ALL="$is_IS_iso_locale" && + export LC_ALL +' + +test_expect_success GETTEXT_ISO_LOCALE,LIBPCRE 'grep pcre string' ' + git grep --perl-regexp -i "TILRAUN: H.lló Heimur!" && + git grep --perl-regexp -i "TILRAUN: H.LLÓ HEIMUR!" +' + +test_done diff --git a/t/t7814-grep-recurse-submodules.sh b/t/t7814-grep-recurse-submodules.sh new file mode 100755 index 0000000000..67247a01d6 --- /dev/null +++ b/t/t7814-grep-recurse-submodules.sh @@ -0,0 +1,241 @@ +#!/bin/sh + +test_description='Test grep recurse-submodules feature + +This test verifies the recurse-submodules feature correctly greps across +submodules. +' + +. ./test-lib.sh + +test_expect_success 'setup directory structure and submodule' ' + echo "foobar" >a && + mkdir b && + echo "bar" >b/b && + git add a b && + git commit -m "add a and b" && + git init submodule && + echo "foobar" >submodule/a && + git -C submodule add a && + git -C submodule commit -m "add a" && + git submodule add ./submodule && + git commit -m "added submodule" +' + +test_expect_success 'grep correctly finds patterns in a submodule' ' + cat >expect <<-\EOF && + a:foobar + b/b:bar + submodule/a:foobar + EOF + + git grep -e "bar" --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success 'grep and basic pathspecs' ' + cat >expect <<-\EOF && + submodule/a:foobar + EOF + + git grep -e. --recurse-submodules -- submodule >actual && + test_cmp expect actual +' + +test_expect_success 'grep and nested submodules' ' + git init submodule/sub && + echo "foobar" >submodule/sub/a && + git -C submodule/sub add a && + git -C submodule/sub commit -m "add a" && + git -C submodule submodule add ./sub && + git -C submodule add sub && + git -C submodule commit -m "added sub" && + git add submodule && + git commit -m "updated submodule" && + + cat >expect <<-\EOF && + a:foobar + b/b:bar + submodule/a:foobar + submodule/sub/a:foobar + EOF + + git grep -e "bar" --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success 'grep and multiple patterns' ' + cat >expect <<-\EOF && + a:foobar + submodule/a:foobar + submodule/sub/a:foobar + EOF + + git grep -e "bar" --and -e "foo" --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success 'grep and multiple patterns' ' + cat >expect <<-\EOF && + b/b:bar + EOF + + git grep -e "bar" --and --not -e "foo" --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success 'basic grep tree' ' + cat >expect <<-\EOF && + HEAD:a:foobar + HEAD:b/b:bar + HEAD:submodule/a:foobar + HEAD:submodule/sub/a:foobar + EOF + + git grep -e "bar" --recurse-submodules HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'grep tree HEAD^' ' + cat >expect <<-\EOF && + HEAD^:a:foobar + HEAD^:b/b:bar + HEAD^:submodule/a:foobar + EOF + + git grep -e "bar" --recurse-submodules HEAD^ >actual && + test_cmp expect actual +' + +test_expect_success 'grep tree HEAD^^' ' + cat >expect <<-\EOF && + HEAD^^:a:foobar + HEAD^^:b/b:bar + EOF + + git grep -e "bar" --recurse-submodules HEAD^^ >actual && + test_cmp expect actual +' + +test_expect_success 'grep tree and pathspecs' ' + cat >expect <<-\EOF && + HEAD:submodule/a:foobar + HEAD:submodule/sub/a:foobar + EOF + + git grep -e "bar" --recurse-submodules HEAD -- submodule >actual && + test_cmp expect actual +' + +test_expect_success 'grep tree and pathspecs' ' + cat >expect <<-\EOF && + HEAD:submodule/a:foobar + HEAD:submodule/sub/a:foobar + EOF + + git grep -e "bar" --recurse-submodules HEAD -- "submodule*a" >actual && + test_cmp expect actual +' + +test_expect_success 'grep tree and more pathspecs' ' + cat >expect <<-\EOF && + HEAD:submodule/a:foobar + EOF + + git grep -e "bar" --recurse-submodules HEAD -- "submodul?/a" >actual && + test_cmp expect actual +' + +test_expect_success 'grep tree and more pathspecs' ' + cat >expect <<-\EOF && + HEAD:submodule/sub/a:foobar + EOF + + git grep -e "bar" --recurse-submodules HEAD -- "submodul*/sub/a" >actual && + test_cmp expect actual +' + +test_expect_success !MINGW 'grep recurse submodule colon in name' ' + git init parent && + test_when_finished "rm -rf parent" && + echo "foobar" >"parent/fi:le" && + git -C parent add "fi:le" && + git -C parent commit -m "add fi:le" && + + git init "su:b" && + test_when_finished "rm -rf su:b" && + echo "foobar" >"su:b/fi:le" && + git -C "su:b" add "fi:le" && + git -C "su:b" commit -m "add fi:le" && + + git -C parent submodule add "../su:b" "su:b" && + git -C parent commit -m "add submodule" && + + cat >expect <<-\EOF && + fi:le:foobar + su:b/fi:le:foobar + EOF + git -C parent grep -e "foobar" --recurse-submodules >actual && + test_cmp expect actual && + + cat >expect <<-\EOF && + HEAD:fi:le:foobar + HEAD:su:b/fi:le:foobar + EOF + git -C parent grep -e "foobar" --recurse-submodules HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'grep history with moved submoules' ' + git init parent && + test_when_finished "rm -rf parent" && + echo "foobar" >parent/file && + git -C parent add file && + git -C parent commit -m "add file" && + + git init sub && + test_when_finished "rm -rf sub" && + echo "foobar" >sub/file && + git -C sub add file && + git -C sub commit -m "add file" && + + git -C parent submodule add ../sub dir/sub && + git -C parent commit -m "add submodule" && + + cat >expect <<-\EOF && + dir/sub/file:foobar + file:foobar + EOF + git -C parent grep -e "foobar" --recurse-submodules >actual && + test_cmp expect actual && + + git -C parent mv dir/sub sub-moved && + git -C parent commit -m "moved submodule" && + + cat >expect <<-\EOF && + file:foobar + sub-moved/file:foobar + EOF + git -C parent grep -e "foobar" --recurse-submodules >actual && + test_cmp expect actual && + + cat >expect <<-\EOF && + HEAD^:dir/sub/file:foobar + HEAD^:file:foobar + EOF + git -C parent grep -e "foobar" --recurse-submodules HEAD^ >actual && + test_cmp expect actual +' + +test_incompatible_with_recurse_submodules () +{ + test_expect_success "--recurse-submodules and $1 are incompatible" " + test_must_fail git grep -e. --recurse-submodules $1 2>actual && + test_i18ngrep 'not supported with --recurse-submodules' actual + " +} + +test_incompatible_with_recurse_submodules --untracked +test_incompatible_with_recurse_submodules --no-index + +test_done diff --git a/t/t8002-blame.sh b/t/t8002-blame.sh index 5cdf3f178e..380e1c1054 100755 --- a/t/t8002-blame.sh +++ b/t/t8002-blame.sh @@ -6,6 +6,11 @@ test_description='git blame' PROG='git blame -c' . "$TEST_DIRECTORY"/annotate-tests.sh +test_expect_success 'blame untracked file in empty repo' ' + >untracked && + test_must_fail git blame untracked +' + PROG='git blame -c -e' test_expect_success 'blame --show-email' ' check_count \ @@ -19,4 +24,98 @@ test_expect_success 'blame --show-email' ' "<E at test dot git>" 1 ' +test_expect_success 'setup showEmail tests' ' + echo "bin: test number 1" >one && + git add one && + GIT_AUTHOR_NAME=name1 \ + GIT_AUTHOR_EMAIL=email1@test.git \ + git commit -m First --date="2010-01-01 01:00:00" && + cat >expected_n <<-\EOF && + (name1 2010-01-01 01:00:00 +0000 1) bin: test number 1 + EOF + cat >expected_e <<-\EOF + (<email1@test.git> 2010-01-01 01:00:00 +0000 1) bin: test number 1 + EOF +' + +find_blame () { + sed -e 's/^[^(]*//' +} + +test_expect_success 'blame with no options and no config' ' + git blame one >blame && + find_blame <blame >result && + test_cmp expected_n result +' + +test_expect_success 'blame with showemail options' ' + git blame --show-email one >blame1 && + find_blame <blame1 >result && + test_cmp expected_e result && + git blame -e one >blame2 && + find_blame <blame2 >result && + test_cmp expected_e result && + git blame --no-show-email one >blame3 && + find_blame <blame3 >result && + test_cmp expected_n result +' + +test_expect_success 'blame with showEmail config false' ' + git config blame.showEmail false && + git blame one >blame1 && + find_blame <blame1 >result && + test_cmp expected_n result && + git blame --show-email one >blame2 && + find_blame <blame2 >result && + test_cmp expected_e result && + git blame -e one >blame3 && + find_blame <blame3 >result && + test_cmp expected_e result && + git blame --no-show-email one >blame4 && + find_blame <blame4 >result && + test_cmp expected_n result +' + +test_expect_success 'blame with showEmail config true' ' + git config blame.showEmail true && + git blame one >blame1 && + find_blame <blame1 >result && + test_cmp expected_e result && + git blame --no-show-email one >blame2 && + find_blame <blame2 >result && + test_cmp expected_n result +' + +test_expect_success 'set up abbrev tests' ' + test_commit abbrev && + sha1=$(git rev-parse --verify HEAD) && + check_abbrev () { + expect=$1; shift + echo $sha1 | cut -c 1-$expect >expect && + git blame "$@" abbrev.t >actual && + perl -lne "/[0-9a-f]+/ and print \$&" <actual >actual.sha && + test_cmp expect actual.sha + } +' + +test_expect_success 'blame --abbrev=<n> works' ' + # non-boundary commits get +1 for alignment + check_abbrev 31 --abbrev=30 HEAD && + check_abbrev 30 --abbrev=30 ^HEAD +' + +test_expect_success 'blame -l aligns regular and boundary commits' ' + check_abbrev 40 -l HEAD && + check_abbrev 39 -l ^HEAD +' + +test_expect_success 'blame --abbrev=40 behaves like -l' ' + check_abbrev 40 --abbrev=40 HEAD && + check_abbrev 39 --abbrev=40 ^HEAD +' + +test_expect_success '--no-abbrev works like --abbrev=40' ' + check_abbrev 40 --no-abbrev +' + test_done diff --git a/t/t8003-blame-corner-cases.sh b/t/t8003-blame-corner-cases.sh index 16f1442c1e..661f9d430d 100755 --- a/t/t8003-blame-corner-cases.sh +++ b/t/t8003-blame-corner-cases.sh @@ -41,12 +41,12 @@ test_expect_success setup ' test_tick && GIT_AUTHOR_NAME=Fourth git commit -m Fourth && - { - echo ABC - echo DEF - echo XXXX - echo GHIJK - } >cow && + cat >cow <<-\EOF && + ABC + DEF + XXXX + GHIJK + EOF git add cow && test_tick && GIT_AUTHOR_NAME=Fifth git commit -m Fifth @@ -115,11 +115,11 @@ test_expect_success 'append with -C -C -C' ' test_expect_success 'blame wholesale copy' ' git blame -f -C -C1 HEAD^ -- cow | sed -e "$pick_fc" >current && - { - echo mouse-Initial - echo mouse-Second - echo mouse-Third - } >expected && + cat >expected <<-\EOF && + mouse-Initial + mouse-Second + mouse-Third + EOF test_cmp expected current ' @@ -127,16 +127,61 @@ test_expect_success 'blame wholesale copy' ' test_expect_success 'blame wholesale copy and more' ' git blame -f -C -C1 HEAD -- cow | sed -e "$pick_fc" >current && - { - echo mouse-Initial - echo mouse-Second - echo cow-Fifth - echo mouse-Third - } >expected && + cat >expected <<-\EOF && + mouse-Initial + mouse-Second + cow-Fifth + mouse-Third + EOF test_cmp expected current ' +test_expect_success 'blame wholesale copy and more in the index' ' + + cat >horse <<-\EOF && + ABC + DEF + XXXX + YYYY + GHIJK + EOF + git add horse && + test_when_finished "git rm -f horse" && + git blame -f -C -C1 -- horse | sed -e "$pick_fc" >current && + cat >expected <<-\EOF && + mouse-Initial + mouse-Second + cow-Fifth + horse-Not + mouse-Third + EOF + test_cmp expected current + +' + +test_expect_success 'blame during cherry-pick with file rename conflict' ' + + test_when_finished "git reset --hard && git checkout master" && + git checkout HEAD~3 && + echo MOUSE >> mouse && + git mv mouse rodent && + git add rodent && + GIT_AUTHOR_NAME=Rodent git commit -m "rodent" && + git checkout --detach master && + (git cherry-pick HEAD@{1} || test $? -eq 1) && + git show HEAD@{1}:rodent > rodent && + git add rodent && + git blame -f -C -C1 rodent | sed -e "$pick_fc" >current && + cat current && + cat >expected <<-\EOF && + mouse-Initial + mouse-Second + rodent-Not + EOF + test_cmp expected current +' + test_expect_success 'blame path that used to be a directory' ' mkdir path && echo A A A A A >path/file && @@ -153,7 +198,7 @@ test_expect_success 'blame path that used to be a directory' ' ' test_expect_success 'blame to a commit with no author name' ' - TREE=`git rev-parse HEAD:` && + TREE=$(git rev-parse HEAD:) && cat >badcommit <<EOF && tree $TREE author <noname> 1234567890 +0000 @@ -161,18 +206,18 @@ committer David Reiss <dreiss@facebook.com> 1234567890 +0000 some message EOF - COMMIT=`git hash-object -t commit -w badcommit` && + COMMIT=$(git hash-object -t commit -w badcommit) && git --no-pager blame $COMMIT -- uno >/dev/null ' test_expect_success 'blame -L with invalid start' ' test_must_fail git blame -L5 tres 2>errors && - grep "has only 2 lines" errors + test_i18ngrep "has only 2 lines" errors ' test_expect_success 'blame -L with invalid end' ' test_must_fail git blame -L1,5 tres 2>errors && - grep "has only 2 lines" errors + test_i18ngrep "has only 2 lines" errors ' test_expect_success 'blame parses <end> part of -L' ' @@ -212,4 +257,18 @@ test_expect_success 'blame file with CRLF attributes text' ' grep "A U Thor" actual ' +test_expect_success 'blame file with CRLF core.autocrlf=true' ' + git config core.autocrlf false && + printf "testcase\r\n" >crlfinrepo && + >.gitattributes && + git add crlfinrepo && + git commit -m "add crlfinrepo" && + git config core.autocrlf true && + mv crlfinrepo tmp && + git checkout crlfinrepo && + rm tmp && + git blame crlfinrepo >actual && + grep "A U Thor" actual +' + test_done diff --git a/t/t8005-blame-i18n.sh b/t/t8005-blame-i18n.sh index 847d098c09..75da219ed1 100755 --- a/t/t8005-blame-i18n.sh +++ b/t/t8005-blame-i18n.sh @@ -33,11 +33,15 @@ author $SJIS_NAME summary $SJIS_MSG EOF +filter_author_summary () { + sed -n -e '/^author /p' -e '/^summary /p' "$@" +} + test_expect_success !MINGW \ 'blame respects i18n.commitencoding' ' - git blame --incremental file | \ - egrep "^(author|summary) " > actual && - test_cmp actual expected + git blame --incremental file >output && + filter_author_summary output >actual && + test_cmp expected actual ' cat >expected <<EOF @@ -52,9 +56,9 @@ EOF test_expect_success !MINGW \ 'blame respects i18n.logoutputencoding' ' git config i18n.logoutputencoding eucJP && - git blame --incremental file | \ - egrep "^(author|summary) " > actual && - test_cmp actual expected + git blame --incremental file >output && + filter_author_summary output >actual && + test_cmp expected actual ' cat >expected <<EOF @@ -68,9 +72,9 @@ EOF test_expect_success !MINGW \ 'blame respects --encoding=UTF-8' ' - git blame --incremental --encoding=UTF-8 file | \ - egrep "^(author|summary) " > actual && - test_cmp actual expected + git blame --incremental --encoding=UTF-8 file >output && + filter_author_summary output >actual && + test_cmp expected actual ' cat >expected <<EOF @@ -84,9 +88,9 @@ EOF test_expect_success !MINGW \ 'blame respects --encoding=none' ' - git blame --incremental --encoding=none file | \ - egrep "^(author|summary) " > actual && - test_cmp actual expected + git blame --incremental --encoding=none file >output && + filter_author_summary output >actual && + test_cmp expected actual ' test_done diff --git a/t/t8008-blame-formats.sh b/t/t8008-blame-formats.sh index 29f84a6dd1..92c8e792d1 100755 --- a/t/t8008-blame-formats.sh +++ b/t/t8008-blame-formats.sh @@ -87,4 +87,21 @@ test_expect_success 'blame --line-porcelain output' ' test_cmp expect actual ' +test_expect_success '--porcelain detects first non-blank line as subject' ' + ( + GIT_INDEX_FILE=.git/tmp-index && + export GIT_INDEX_FILE && + echo "This is it" >single-file && + git add single-file && + tree=$(git write-tree) && + commit=$(printf "%s\n%s\n%s\n\n\n \noneline\n\nbody\n" \ + "tree $tree" \ + "author A <a@b.c> 123456789 +0000" \ + "committer C <c@d.e> 123456789 +0000" | + git hash-object -w -t commit --stdin) && + git blame --porcelain $commit -- single-file >output && + grep "^summary oneline$" output + ) +' + test_done diff --git a/t/t8009-blame-vs-topicbranches.sh b/t/t8009-blame-vs-topicbranches.sh new file mode 100755 index 0000000000..72596e38b2 --- /dev/null +++ b/t/t8009-blame-vs-topicbranches.sh @@ -0,0 +1,36 @@ +#!/bin/sh + +test_description='blaming trough history with topic branches' +. ./test-lib.sh + +# Creates the history shown below. '*'s mark the first parent in the merges. +# The only line of file.t is changed in commit B2 +# +# +---C1 +# / \ +# A0--A1--*A2--*A3 +# \ / +# B1-B2 +# +test_expect_success setup ' + test_commit A0 file.t line0 && + test_commit A1 && + git reset --hard A0 && + test_commit B1 && + test_commit B2 file.t line0changed && + git reset --hard A1 && + test_merge A2 B2 && + git reset --hard A1 && + test_commit C1 && + git reset --hard A2 && + test_merge A3 C1 + ' + +test_expect_success 'blame --reverse --first-parent finds A1' ' + git blame --porcelain --reverse --first-parent A0..A3 -- file.t >actual_full && + head -n 1 <actual_full | sed -e "s/ .*//" >actual && + git rev-parse A1 >expect && + test_cmp expect actual + ' + +test_done diff --git a/t/t8010-cat-file-filters.sh b/t/t8010-cat-file-filters.sh new file mode 100755 index 0000000000..d8242e467e --- /dev/null +++ b/t/t8010-cat-file-filters.sh @@ -0,0 +1,64 @@ +#!/bin/sh + +test_description='git cat-file filters support' +. ./test-lib.sh + +test_expect_success 'setup ' ' + echo "*.txt eol=crlf diff=txt" >.gitattributes && + echo "hello" | append_cr >world.txt && + git add .gitattributes world.txt && + test_tick && + git commit -m "Initial commit" +' + +has_cr () { + tr '\015' Q <"$1" | grep Q >/dev/null +} + +test_expect_success 'no filters with `git show`' ' + git show HEAD:world.txt >actual && + ! has_cr actual + +' + +test_expect_success 'no filters with cat-file' ' + git cat-file blob HEAD:world.txt >actual && + ! has_cr actual +' + +test_expect_success 'cat-file --filters converts to worktree version' ' + git cat-file --filters HEAD:world.txt >actual && + has_cr actual +' + +test_expect_success 'cat-file --filters --path=<path> works' ' + sha1=$(git rev-parse -q --verify HEAD:world.txt) && + git cat-file --filters --path=world.txt $sha1 >actual && + has_cr actual +' + +test_expect_success 'cat-file --textconv --path=<path> works' ' + sha1=$(git rev-parse -q --verify HEAD:world.txt) && + test_config diff.txt.textconv "tr A-Za-z N-ZA-Mn-za-m <" && + git cat-file --textconv --path=hello.txt $sha1 >rot13 && + test uryyb = "$(cat rot13 | remove_cr)" +' + +test_expect_success '--path=<path> complains without --textconv/--filters' ' + sha1=$(git rev-parse -q --verify HEAD:world.txt) && + test_must_fail git cat-file --path=hello.txt blob $sha1 >actual 2>err && + test ! -s actual && + grep "path.*needs.*filters" err +' + +test_expect_success 'cat-file --textconv --batch works' ' + sha1=$(git rev-parse -q --verify HEAD:world.txt) && + test_config diff.txt.textconv "tr A-Za-z N-ZA-Mn-za-m <" && + printf "%s hello.txt\n%s hello\n" $sha1 $sha1 | + git cat-file --textconv --batch >actual && + printf "%s blob 6\nuryyb\r\n\n%s blob 6\nhello\n\n" \ + $sha1 $sha1 >expect && + test_cmp expect actual +' + +test_done diff --git a/t/t8011-blame-split-file.sh b/t/t8011-blame-split-file.sh new file mode 100755 index 0000000000..831125047b --- /dev/null +++ b/t/t8011-blame-split-file.sh @@ -0,0 +1,117 @@ +#!/bin/sh + +test_description=' +The general idea is that we have a single file whose lines come from +multiple other files, and those individual files were modified in the same +commits. That means that we will see the same commit in multiple contexts, +and each one should be attributed to the correct file. + +Note that we need to use "blame -C" to find the commit for all lines. We will +not bother testing that the non-C case fails to find it. That is how blame +behaves now, but it is not a property we want to make sure is retained. +' +. ./test-lib.sh + +# help avoid typing and reading long strings of similar lines +# in the tests below +generate_expect () { + while read nr data + do + i=0 + while test $i -lt $nr + do + echo $data + i=$((i + 1)) + done + done +} + +test_expect_success 'setup split file case' ' + # use lines long enough to trigger content detection + test_seq 1000 1010 >one && + test_seq 2000 2010 >two && + git add one two && + test_commit base && + + sed "6s/^/modified /" <one >one.tmp && + mv one.tmp one && + sed "6s/^/modified /" <two >two.tmp && + mv two.tmp two && + git add -u && + test_commit modified && + + cat one two >combined && + git add combined && + git rm one two && + test_commit combined +' + +test_expect_success 'setup simulated porcelain' ' + # This just reads porcelain-ish output and tries + # to output the value of a given field for each line (either by + # reading the field that accompanies this line, or referencing + # the information found last time the commit was mentioned). + cat >read-porcelain.pl <<-\EOF + my $field = shift; + while (<>) { + if (/^[0-9a-f]{40} /) { + flush(); + $hash = $&; + } elsif (/^$field (.*)/) { + $cache{$hash} = $1; + } + } + flush(); + + sub flush { + return unless defined $hash; + if (defined $cache{$hash}) { + print "$cache{$hash}\n"; + } else { + print "NONE\n"; + } + } + EOF +' + +for output in porcelain line-porcelain +do + test_expect_success "generate --$output output" ' + git blame --root -C --$output combined >output + ' + + test_expect_success "$output output finds correct commits" ' + generate_expect >expect <<-\EOF && + 5 base + 1 modified + 10 base + 1 modified + 5 base + EOF + perl read-porcelain.pl summary <output >actual && + test_cmp expect actual + ' + + test_expect_success "$output output shows correct filenames" ' + generate_expect >expect <<-\EOF && + 11 one + 11 two + EOF + perl read-porcelain.pl filename <output >actual && + test_cmp expect actual + ' + + test_expect_success "$output output shows correct previous pointer" ' + generate_expect >expect <<-EOF && + 5 NONE + 1 $(git rev-parse modified^) one + 10 NONE + 1 $(git rev-parse modified^) two + 5 NONE + EOF + perl read-porcelain.pl previous <output >actual && + test_cmp expect actual + ' +done + +test_done diff --git a/t/t9000-addresses.sh b/t/t9000-addresses.sh new file mode 100755 index 0000000000..a1ebef6de2 --- /dev/null +++ b/t/t9000-addresses.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +test_description='compare address parsing with and without Mail::Address' +. ./test-lib.sh + +if ! test_have_prereq PERL; then + skip_all='skipping perl interface tests, perl not available' + test_done +fi + +perl -MTest::More -e 0 2>/dev/null || { + skip_all="Perl Test::More unavailable, skipping test" + test_done +} + +perl -MMail::Address -e 0 2>/dev/null || { + skip_all="Perl Mail::Address unavailable, skipping test" + test_done +} + +test_external_has_tap=1 + +test_external_without_stderr \ + 'Perl address parsing function' \ + perl "$TEST_DIRECTORY"/t9000/test.pl + +test_done diff --git a/t/t9000/test.pl b/t/t9000/test.pl new file mode 100755 index 0000000000..dfeaa9c655 --- /dev/null +++ b/t/t9000/test.pl @@ -0,0 +1,67 @@ +#!/usr/bin/perl +use lib (split(/:/, $ENV{GITPERLLIB})); + +use 5.008; +use warnings; +use strict; + +use Test::More qw(no_plan); +use Mail::Address; + +BEGIN { use_ok('Git') } + +my @success_list = (q[Jane], + q[jdoe@example.com], + q[<jdoe@example.com>], + q[Jane <jdoe@example.com>], + q[Jane Doe <jdoe@example.com>], + q["Jane" <jdoe@example.com>], + q["Doe, Jane" <jdoe@example.com>], + q["Jane@:;\>.,()<Doe" <jdoe@example.com>], + q[Jane!#$%&'*+-/=?^_{|}~Doe' <jdoe@example.com>], + q["<jdoe@example.com>"], + q["Jane jdoe@example.com"], + q[Jane Doe <jdoe @ example.com >], + q[Jane Doe < jdoe@example.com >], + q[Jane @ Doe @ Jane @ Doe], + q["Jane, 'Doe'" <jdoe@example.com>], + q['Doe, "Jane' <jdoe@example.com>], + q["Jane" "Do"e <jdoe@example.com>], + q["Jane' Doe" <jdoe@example.com>], + q["Jane Doe <jdoe@example.com>" <jdoe@example.com>], + q["Jane\" Doe" <jdoe@example.com>], + q[Doe, jane <jdoe@example.com>], + q["Jane Doe <jdoe@example.com>], + q['Jane 'Doe' <jdoe@example.com>], + q[Jane@:;\.,()<>Doe <jdoe@example.com>], + q[Jane <jdoe@example.com> Doe], + q[<jdoe@example.com> Jane Doe]); + +my @known_failure_list = (q[Jane\ Doe <jdoe@example.com>], + q["Doe, Ja"ne <jdoe@example.com>], + q["Doe, Katarina" Jane <jdoe@example.com>], + q[Jane jdoe@example.com], + q["Jane "Kat"a" ri"na" ",Doe" <jdoe@example.com>], + q[Jane Doe], + q[Jane "Doe <jdoe@example.com>"], + q[\"Jane Doe <jdoe@example.com>], + q[Jane\"\" Doe <jdoe@example.com>], + q['Jane "Katarina\" \' Doe' <jdoe@example.com>]); + +foreach my $str (@success_list) { + my @expected = map { $_->format } Mail::Address->parse("$str"); + my @actual = Git::parse_mailboxes("$str"); + is_deeply(\@expected, \@actual, qq[same output : $str]); +} + +TODO: { + local $TODO = "known breakage"; + foreach my $str (@known_failure_list) { + my @expected = map { $_->format } Mail::Address->parse("$str"); + my @actual = Git::parse_mailboxes("$str"); + is_deeply(\@expected, \@actual, qq[same output : $str]); + } +} + +my $is_passing = eval { Test::More->is_passing }; +exit($is_passing ? 0 : 1) unless $@ =~ /Can't locate object method/; diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index a3663da49b..0f398dd160 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -36,7 +36,7 @@ clean_fake_sendmail () { } test_expect_success $PREREQ 'Extract patches' ' - patches=`git format-patch -s --cc="One <one@example.com>" --cc=two@example.com -n HEAD^1` + patches=$(git format-patch -s --cc="One <one@example.com>" --cc=two@example.com -n HEAD^1) ' # Test no confirm early to ensure remaining tests will not hang @@ -50,7 +50,7 @@ test_no_confirm () { --smtp-server="$(pwd)/fake.sendmail" \ $@ \ $patches >stdout && - test_must_fail grep "Send this email" stdout && + ! grep "Send this email" stdout && >no_confirm_okay } @@ -140,6 +140,35 @@ test_expect_success $PREREQ 'Verify commandline' ' test_cmp expected commandline1 ' +test_expect_success $PREREQ 'setup expect for cc trailer' " +cat >expected-cc <<\EOF +!recipient@example.com! +!author@example.com! +!one@example.com! +!two@example.com! +!three@example.com! +!four@example.com! +!five@example.com! +EOF +" + +test_expect_success $PREREQ 'cc trailer with various syntax' ' + test_commit cc-trailer && + test_when_finished "git reset --hard HEAD^" && + git commit --amend -F - <<-EOF && + Test Cc: trailers. + + Cc: one@example.com + Cc: <two@example.com> # this is part of the name + Cc: <three@example.com>, <four@example.com> # not.five@example.com + Cc: "Some # Body" <five@example.com> [part.of.name.too] + EOF + clean_fake_sendmail && + git send-email -1 --to=recipient@example.com \ + --smtp-server="$(pwd)/fake.sendmail" && + test_cmp expected-cc commandline1 +' + test_expect_success $PREREQ 'setup expect' " cat >expected-show-all-headers <<\EOF 0001-Second.patch @@ -312,13 +341,19 @@ test_expect_success $PREREQ,!AUTOIDENT 'broken implicit ident aborts send-email' ) ' +test_expect_success $PREREQ 'setup tocmd and cccmd scripts' ' + write_script tocmd-sed <<-\EOF && + sed -n -e "s/^tocmd--//p" "$1" + EOF + write_script cccmd-sed <<-\EOF + sed -n -e "s/^cccmd--//p" "$1" + EOF +' + test_expect_success $PREREQ 'tocmd works' ' clean_fake_sendmail && cp $patches tocmd.patch && echo tocmd--tocmd@example.com >>tocmd.patch && - write_script tocmd-sed <<-\EOF && - sed -n -e "s/^tocmd--//p" "$1" - EOF git send-email \ --from="Example <nobody@example.com>" \ --to-cmd=./tocmd-sed \ @@ -332,9 +367,6 @@ test_expect_success $PREREQ 'cccmd works' ' clean_fake_sendmail && cp $patches cccmd.patch && echo "cccmd-- cccmd@example.com" >>cccmd.patch && - write_script cccmd-sed <<-\EOF && - sed -n -e "s/^cccmd--//p" "$1" - EOF git send-email \ --from="Example <nobody@example.com>" \ --to=nobody@example.com \ @@ -519,6 +551,12 @@ Result: OK EOF " +replace_variable_fields () { + sed -e "s/^\(Date:\).*/\1 DATE-STRING/" \ + -e "s/^\(Message-Id:\).*/\1 MESSAGE-ID-STRING/" \ + -e "s/^\(X-Mailer:\).*/\1 X-MAILER-STRING/" +} + test_suppression () { git send-email \ --dry-run \ @@ -526,10 +564,7 @@ test_suppression () { --from="Example <from@example.com>" \ --to=to@example.com \ --smtp-server relay.example.com \ - $patches | - sed -e "s/^\(Date:\).*/\1 DATE-STRING/" \ - -e "s/^\(Message-Id:\).*/\1 MESSAGE-ID-STRING/" \ - -e "s/^\(X-Mailer:\).*/\1 X-MAILER-STRING/" \ + $patches | replace_variable_fields \ >actual-suppress-$1${2+"-$2"} && test_cmp expected-suppress-$1${2+"-$2"} actual-suppress-$1${2+"-$2"} } @@ -1145,7 +1180,7 @@ test_expect_success $PREREQ '--no-bcc overrides sendemail.bcc' ' ' test_expect_success $PREREQ 'patches To headers are used by default' ' - patch=`git format-patch -1 --to="bodies@example.com"` && + patch=$(git format-patch -1 --to="bodies@example.com") && test_when_finished "rm $patch" && git send-email \ --dry-run \ @@ -1156,7 +1191,7 @@ test_expect_success $PREREQ 'patches To headers are used by default' ' ' test_expect_success $PREREQ 'patches To headers are appended to' ' - patch=`git format-patch -1 --to="bodies@example.com"` && + patch=$(git format-patch -1 --to="bodies@example.com") && test_when_finished "rm $patch" && git send-email \ --dry-run \ @@ -1169,8 +1204,8 @@ test_expect_success $PREREQ 'patches To headers are appended to' ' ' test_expect_success $PREREQ 'To headers from files reset each patch' ' - patch1=`git format-patch -1 --to="bodies@example.com"` && - patch2=`git format-patch -1 --to="other@example.com" HEAD~` && + patch1=$(git format-patch -1 --to="bodies@example.com") && + patch2=$(git format-patch -1 --to="other@example.com" HEAD~) && test_when_finished "rm $patch1 && rm $patch2" && git send-email \ --dry-run \ @@ -1482,7 +1517,7 @@ test_cover_addresses () { clean_fake_sendmail && rm -fr outdir && git format-patch --cover-letter -2 -o outdir && - cover=`echo outdir/0000-*.patch` && + cover=$(echo outdir/0000-*.patch) && mv $cover cover-to-edit.patch && perl -pe "s/^From:/$header: extra\@address.com\nFrom:/" cover-to-edit.patch >"$cover" && git send-email \ @@ -1521,6 +1556,21 @@ test_expect_success $PREREQ 'cccover adds Cc to all mail' ' test_cover_addresses "Cc" ' +test_expect_success $PREREQ 'escaped quotes in sendemail.aliasfiletype=mutt' ' + clean_fake_sendmail && + echo "alias sbd \\\"Dot U. Sir\\\" <somebody@example.org>" >.mutt && + git config --replace-all sendemail.aliasesfile "$(pwd)/.mutt" && + git config sendemail.aliasfiletype mutt && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=sbd \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0001-*.patch \ + 2>errors >out && + grep "^!somebody@example\.org!$" commandline1 && + grep -F "To: \"Dot U. Sir\" <somebody@example.org>" out +' + test_expect_success $PREREQ 'sendemail.aliasfiletype=mailrc' ' clean_fake_sendmail && echo "alias sbd somebody@example.org" >.mailrc && @@ -1549,10 +1599,117 @@ test_expect_success $PREREQ 'sendemail.aliasfile=~/.mailrc' ' grep "^!someone@example\.org!$" commandline1 ' -test_expect_success $PREREQ 'sendemail.aliasfiletype=sendmail' ' - clean_fake_sendmail && rm -fr outdir && - git format-patch -1 -o outdir && - cat >>.tmp-email-aliases <<-\EOF && +test_dump_aliases () { + msg="$1" && shift && + filetype="$1" && shift && + printf '%s\n' "$@" >expect && + cat >.tmp-email-aliases && + + test_expect_success $PREREQ "$msg" ' + clean_fake_sendmail && rm -fr outdir && + git config --replace-all sendemail.aliasesfile \ + "$(pwd)/.tmp-email-aliases" && + git config sendemail.aliasfiletype "$filetype" && + git send-email --dump-aliases 2>errors >actual && + test_cmp expect actual + ' +} + +test_dump_aliases '--dump-aliases sendmail format' \ + 'sendmail' \ + 'abgroup' \ + 'alice' \ + 'bcgrp' \ + 'bob' \ + 'chloe' <<-\EOF + alice: Alice W Land <awol@example.com> + bob: Robert Bobbyton <bob@example.com> + chloe: chloe@example.com + abgroup: alice, bob + bcgrp: bob, chloe, Other <o@example.com> + EOF + +test_dump_aliases '--dump-aliases mutt format' \ + 'mutt' \ + 'alice' \ + 'bob' \ + 'chloe' \ + 'donald' <<-\EOF + alias alice Alice W Land <awol@example.com> + alias donald Donald C Carlton <donc@example.com> + alias bob Robert Bobbyton <bob@example.com> + alias chloe chloe@example.com + EOF + +test_dump_aliases '--dump-aliases mailrc format' \ + 'mailrc' \ + 'alice' \ + 'bob' \ + 'chloe' \ + 'eve' <<-\EOF + alias alice Alice W Land <awol@example.com> + alias eve Eve <eve@example.com> + alias bob Robert Bobbyton <bob@example.com> + alias chloe chloe@example.com + EOF + +test_dump_aliases '--dump-aliases pine format' \ + 'pine' \ + 'alice' \ + 'bob' \ + 'chloe' \ + 'eve' <<-\EOF + alice Alice W Land <awol@example.com> + eve Eve <eve@example.com> + bob Robert Bobbyton <bob@example.com> + chloe chloe@example.com + EOF + +test_dump_aliases '--dump-aliases gnus format' \ + 'gnus' \ + 'alice' \ + 'bob' \ + 'chloe' \ + 'eve' <<-\EOF + (define-mail-alias "alice" "awol@example.com") + (define-mail-alias "eve" "eve@example.com") + (define-mail-alias "bob" "bob@example.com") + (define-mail-alias "chloe" "chloe@example.com") + EOF + +test_expect_success '--dump-aliases must be used alone' ' + test_must_fail git send-email --dump-aliases --to=janice@example.com -1 refs/heads/accounting +' + +test_sendmail_aliases () { + msg="$1" && shift && + expect="$@" && + cat >.tmp-email-aliases && + + test_expect_success $PREREQ "$msg" ' + clean_fake_sendmail && rm -fr outdir && + git format-patch -1 -o outdir && + git config --replace-all sendemail.aliasesfile \ + "$(pwd)/.tmp-email-aliases" && + git config sendemail.aliasfiletype sendmail && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=alice --to=bcgrp \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0001-*.patch \ + 2>errors >out && + for i in $expect + do + grep "^!$i!$" commandline1 || return 1 + done + ' +} + +test_sendmail_aliases 'sendemail.aliasfiletype=sendmail' \ + 'awol@example\.com' \ + 'bob@example\.com' \ + 'chloe@example\.com' \ + 'o@example\.com' <<-\EOF alice: Alice W Land <awol@example.com> bob: Robert Bobbyton <bob@example.com> # this is a comment @@ -1561,19 +1718,99 @@ test_expect_success $PREREQ 'sendemail.aliasfiletype=sendmail' ' abgroup: alice, bob bcgrp: bob, chloe, Other <o@example.com> EOF - git config --replace-all sendemail.aliasesfile \ - "$(pwd)/.tmp-email-aliases" && - git config sendemail.aliasfiletype sendmail && + +test_sendmail_aliases 'sendmail aliases line folding' \ + alice1 \ + bob1 bob2 \ + chuck1 chuck2 \ + darla1 darla2 darla3 \ + elton1 elton2 elton3 \ + fred1 fred2 \ + greg1 <<-\EOF + alice: alice1 + bob: bob1,\ + bob2 + chuck: chuck1, + chuck2 + darla: darla1,\ + darla2, + darla3 + elton: elton1, + elton2,\ + elton3 + fred: fred1,\ + fred2 + greg: greg1 + bcgrp: bob, chuck, darla, elton, fred, greg + EOF + +test_sendmail_aliases 'sendmail aliases tolerate bogus line folding' \ + alice1 bob1 <<-\EOF + alice: alice1 + bcgrp: bob1\ + EOF + +test_sendmail_aliases 'sendmail aliases empty' alice bcgrp <<-\EOF + EOF + +test_expect_success $PREREQ 'alias support in To header' ' + clean_fake_sendmail && + echo "alias sbd someone@example.org" >.mailrc && + test_config sendemail.aliasesfile ".mailrc" && + test_config sendemail.aliasfiletype mailrc && + git format-patch --stdout -1 --to=sbd >aliased.patch && git send-email \ --from="Example <nobody@example.com>" \ - --to=alice --to=bcgrp \ --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0001-*.patch \ + aliased.patch \ 2>errors >out && - grep "^!awol@example\.com!$" commandline1 && - grep "^!bob@example\.com!$" commandline1 && - grep "^!chloe@example\.com!$" commandline1 && - grep "^!o@example\.com!$" commandline1 + grep "^!someone@example\.org!$" commandline1 +' + +test_expect_success $PREREQ 'alias support in Cc header' ' + clean_fake_sendmail && + echo "alias sbd someone@example.org" >.mailrc && + test_config sendemail.aliasesfile ".mailrc" && + test_config sendemail.aliasfiletype mailrc && + git format-patch --stdout -1 --cc=sbd >aliased.patch && + git send-email \ + --from="Example <nobody@example.com>" \ + --smtp-server="$(pwd)/fake.sendmail" \ + aliased.patch \ + 2>errors >out && + grep "^!someone@example\.org!$" commandline1 +' + +test_expect_success $PREREQ 'tocmd works with aliases' ' + clean_fake_sendmail && + echo "alias sbd someone@example.org" >.mailrc && + test_config sendemail.aliasesfile ".mailrc" && + test_config sendemail.aliasfiletype mailrc && + git format-patch --stdout -1 >tocmd.patch && + echo tocmd--sbd >>tocmd.patch && + git send-email \ + --from="Example <nobody@example.com>" \ + --to-cmd=./tocmd-sed \ + --smtp-server="$(pwd)/fake.sendmail" \ + tocmd.patch \ + 2>errors >out && + grep "^!someone@example\.org!$" commandline1 +' + +test_expect_success $PREREQ 'cccmd works with aliases' ' + clean_fake_sendmail && + echo "alias sbd someone@example.org" >.mailrc && + test_config sendemail.aliasesfile ".mailrc" && + test_config sendemail.aliasfiletype mailrc && + git format-patch --stdout -1 >cccmd.patch && + echo cccmd--sbd >>cccmd.patch && + git send-email \ + --from="Example <nobody@example.com>" \ + --cc-cmd=./cccmd-sed \ + --smtp-server="$(pwd)/fake.sendmail" \ + cccmd.patch \ + 2>errors >out && + grep "^!someone@example\.org!$" commandline1 ' do_xmailer_test () { @@ -1609,4 +1846,72 @@ test_expect_success $PREREQ '--[no-]xmailer with sendemail.xmailer=false' ' do_xmailer_test 1 "--xmailer" ' +test_expect_success $PREREQ 'setup expected-list' ' + git send-email \ + --dry-run \ + --from="Example <from@example.com>" \ + --to="To 1 <to1@example.com>" \ + --to="to2@example.com" \ + --to="to3@example.com" \ + --cc="Cc 1 <cc1@example.com>" \ + --cc="Cc2 <cc2@example.com>" \ + --bcc="bcc1@example.com" \ + --bcc="bcc2@example.com" \ + 0001-add-master.patch | replace_variable_fields \ + >expected-list +' + +test_expect_success $PREREQ 'use email list in --cc --to and --bcc' ' + git send-email \ + --dry-run \ + --from="Example <from@example.com>" \ + --to="To 1 <to1@example.com>, to2@example.com" \ + --to="to3@example.com" \ + --cc="Cc 1 <cc1@example.com>, Cc2 <cc2@example.com>" \ + --bcc="bcc1@example.com, bcc2@example.com" \ + 0001-add-master.patch | replace_variable_fields \ + >actual-list && + test_cmp expected-list actual-list +' + +test_expect_success $PREREQ 'aliases work with email list' ' + echo "alias to2 to2@example.com" >.mutt && + echo "alias cc1 Cc 1 <cc1@example.com>" >>.mutt && + test_config sendemail.aliasesfile ".mutt" && + test_config sendemail.aliasfiletype mutt && + git send-email \ + --dry-run \ + --from="Example <from@example.com>" \ + --to="To 1 <to1@example.com>, to2, to3@example.com" \ + --cc="cc1, Cc2 <cc2@example.com>" \ + --bcc="bcc1@example.com, bcc2@example.com" \ + 0001-add-master.patch | replace_variable_fields \ + >actual-list && + test_cmp expected-list actual-list +' + +test_expect_success $PREREQ 'leading and trailing whitespaces are removed' ' + echo "alias to2 to2@example.com" >.mutt && + echo "alias cc1 Cc 1 <cc1@example.com>" >>.mutt && + test_config sendemail.aliasesfile ".mutt" && + test_config sendemail.aliasfiletype mutt && + TO1=$(echo "QTo 1 <to1@example.com>" | q_to_tab) && + TO2=$(echo "QZto2" | qz_to_tab_space) && + CC1=$(echo "cc1" | append_cr) && + BCC1=$(echo "Q bcc1@example.com Q" | q_to_nul) && + git send-email \ + --dry-run \ + --from=" Example <from@example.com>" \ + --to="$TO1" \ + --to="$TO2" \ + --to=" to3@example.com " \ + --cc="$CC1" \ + --cc="Cc2 <cc2@example.com>" \ + --bcc="$BCC1" \ + --bcc="bcc2@example.com" \ + 0001-add-master.patch | replace_variable_fields \ + >actual-list && + test_cmp expected-list actual-list +' + test_done diff --git a/t/t9003-help-autocorrect.sh b/t/t9003-help-autocorrect.sh new file mode 100755 index 0000000000..b1c7919c4a --- /dev/null +++ b/t/t9003-help-autocorrect.sh @@ -0,0 +1,52 @@ +#!/bin/sh + +test_description='help.autocorrect finding a match' +. ./test-lib.sh + +test_expect_success 'setup' ' + # An alias + git config alias.lgf "log --format=%s --first-parent" && + + # A random user-defined command + write_script git-distimdistim <<-EOF && + echo distimdistim was called + EOF + + PATH="$PATH:." && + export PATH && + + git commit --allow-empty -m "a single log entry" && + + # Sanity check + git lgf >actual && + echo "a single log entry" >expect && + test_cmp expect actual && + + git distimdistim >actual && + echo "distimdistim was called" >expect && + test_cmp expect actual +' + +test_expect_success 'autocorrect showing candidates' ' + git config help.autocorrect 0 && + + test_must_fail git lfg 2>actual && + grep "^ lgf" actual && + + test_must_fail git distimdist 2>actual && + grep "^ distimdistim" actual +' + +test_expect_success 'autocorrect running commands' ' + git config help.autocorrect -1 && + + git lfg >actual && + echo "a single log entry" >expect && + test_cmp expect actual && + + git distimdist >actual && + echo "distimdistim was called" >expect && + test_cmp expect actual +' + +test_done diff --git a/t/t9100-git-svn-basic.sh b/t/t9100-git-svn-basic.sh index 4fea8d901b..8a8ba65a2a 100755 --- a/t/t9100-git-svn-basic.sh +++ b/t/t9100-git-svn-basic.sh @@ -8,8 +8,6 @@ GIT_SVN_LC_ALL=${LC_ALL:-$LANG} . ./lib-git-svn.sh -say 'define NO_SVN_TESTS to skip git svn tests' - case "$GIT_SVN_LC_ALL" in *.UTF-8) test_set_prereq UTF8 @@ -19,6 +17,14 @@ case "$GIT_SVN_LC_ALL" in ;; esac +test_expect_success 'git svn --version works anywhere' ' + nongit git svn --version +' + +test_expect_success 'git svn help works anywhere' ' + nongit git svn help +' + test_expect_success \ 'initialize git svn' ' mkdir import && @@ -45,13 +51,13 @@ test_expect_success "checkout from svn" 'svn co "$svnrepo" "$SVN_TREE"' name='try a deep --rmdir with a commit' test_expect_success "$name" ' - git checkout -f -b mybranch ${remotes_git_svn} && + git checkout -f -b mybranch remotes/git-svn && mv dir/a/b/c/d/e/file dir/file && cp dir/file file && git update-index --add --remove dir/a/b/c/d/e/file dir/file file && git commit -m "$name" && git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch && + remotes/git-svn..mybranch && svn_cmd up "$SVN_TREE" && test -d "$SVN_TREE"/dir && test ! -d "$SVN_TREE"/dir/a' @@ -65,14 +71,14 @@ test_expect_success "$name" " git update-index --add dir/file/file && git commit -m '$name' && test_must_fail git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch + remotes/git-svn..mybranch " name='detect node change from directory to file #1' test_expect_success "$name" ' rm -rf dir "$GIT_DIR"/index && - git checkout -f -b mybranch2 ${remotes_git_svn} && + git checkout -f -b mybranch2 remotes/git-svn && mv bar/zzz zzz && rm -rf bar && mv zzz bar && @@ -80,14 +86,14 @@ test_expect_success "$name" ' git update-index --add -- bar && git commit -m "$name" && test_must_fail git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch2 + remotes/git-svn..mybranch2 ' name='detect node change from file to directory #2' test_expect_success "$name" ' rm -f "$GIT_DIR"/index && - git checkout -f -b mybranch3 ${remotes_git_svn} && + git checkout -f -b mybranch3 remotes/git-svn && rm bar/zzz && git update-index --remove bar/zzz && mkdir bar/zzz && @@ -95,7 +101,7 @@ test_expect_success "$name" ' git update-index --add bar/zzz/yyy && git commit -m "$name" && git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch3 && + remotes/git-svn..mybranch3 && svn_cmd up "$SVN_TREE" && test -d "$SVN_TREE"/bar/zzz && test -e "$SVN_TREE"/bar/zzz/yyy @@ -104,7 +110,7 @@ test_expect_success "$name" ' name='detect node change from directory to file #2' test_expect_success "$name" ' rm -f "$GIT_DIR"/index && - git checkout -f -b mybranch4 ${remotes_git_svn} && + git checkout -f -b mybranch4 remotes/git-svn && rm -rf dir && git update-index --remove -- dir/file && touch dir && @@ -112,67 +118,67 @@ test_expect_success "$name" ' git update-index --add -- dir && git commit -m "$name" && test_must_fail git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch4 + remotes/git-svn..mybranch4 ' name='remove executable bit from a file' -test_expect_success "$name" ' +test_expect_success POSIXPERM "$name" ' rm -f "$GIT_DIR"/index && - git checkout -f -b mybranch5 ${remotes_git_svn} && + git checkout -f -b mybranch5 remotes/git-svn && chmod -x exec.sh && git update-index exec.sh && git commit -m "$name" && git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch5 && + remotes/git-svn..mybranch5 && svn_cmd up "$SVN_TREE" && test ! -x "$SVN_TREE"/exec.sh' name='add executable bit back file' -test_expect_success "$name" ' +test_expect_success POSIXPERM "$name" ' chmod +x exec.sh && git update-index exec.sh && git commit -m "$name" && git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch5 && + remotes/git-svn..mybranch5 && svn_cmd up "$SVN_TREE" && test -x "$SVN_TREE"/exec.sh' name='executable file becomes a symlink to file' -test_expect_success "$name" ' +test_expect_success SYMLINKS "$name" ' rm exec.sh && ln -s file exec.sh && git update-index exec.sh && git commit -m "$name" && git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch5 && + remotes/git-svn..mybranch5 && svn_cmd up "$SVN_TREE" && test -h "$SVN_TREE"/exec.sh' name='new symlink is added to a file that was also just made executable' -test_expect_success "$name" ' +test_expect_success POSIXPERM,SYMLINKS "$name" ' chmod +x file && ln -s file exec-2.sh && git update-index --add file exec-2.sh && git commit -m "$name" && git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch5 && + remotes/git-svn..mybranch5 && svn_cmd up "$SVN_TREE" && test -x "$SVN_TREE"/file && test -h "$SVN_TREE"/exec-2.sh' name='modify a symlink to become a file' -test_expect_success "$name" ' +test_expect_success POSIXPERM,SYMLINKS "$name" ' echo git help >help && rm exec-2.sh && cp help exec-2.sh && git update-index exec-2.sh && git commit -m "$name" && git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch5 && + remotes/git-svn..mybranch5 && svn_cmd up "$SVN_TREE" && test -f "$SVN_TREE"/exec-2.sh && test ! -h "$SVN_TREE"/exec-2.sh && @@ -181,7 +187,8 @@ test_expect_success "$name" ' name="commit with UTF-8 message: locale: $GIT_SVN_LC_ALL" LC_ALL="$GIT_SVN_LC_ALL" export LC_ALL -test_expect_success UTF8 "$name" " +# This test relies on the previous test, hence requires POSIXPERM,SYMLINKS +test_expect_success UTF8,POSIXPERM,SYMLINKS "$name" " echo '# hello' >> exec-2.sh && git update-index exec-2.sh && git commit -m 'éïâˆ' && @@ -193,7 +200,7 @@ GIT_SVN_ID=alt export GIT_SVN_ID test_expect_success "$name" \ 'git svn init "$svnrepo" && git svn fetch && - git rev-list --pretty=raw ${remotes_git_svn} | grep ^tree | uniq > a && + git rev-list --pretty=raw remotes/git-svn | grep ^tree | uniq > a && git rev-list --pretty=raw remotes/alt | grep ^tree | uniq > b && test_cmp a b' @@ -214,19 +221,19 @@ tree d667270a1f7b109f5eb3aaea21ede14b56bfdd6e tree 8f51f74cf0163afc9ad68a4b1537288c4558b5a4 EOF -test_expect_success "$name" "test_cmp a expected" +test_expect_success POSIXPERM,SYMLINKS "$name" "test_cmp a expected" -test_expect_success 'exit if remote refs are ambigious' " +test_expect_success 'exit if remote refs are ambigious' ' git config --add svn-remote.svn.fetch \ - bar:refs/${remotes_git_svn} && + bar:refs/remotes/git-svn && test_must_fail git svn migrate -" +' test_expect_success 'exit if init-ing a would clobber a URL' ' svnadmin create "${PWD}/svnrepo2" && svn mkdir -m "mkdir bar" "${svnrepo}2/bar" && git config --unset svn-remote.svn.fetch \ - "^bar:refs/${remotes_git_svn}$" && + "^bar:refs/remotes/git-svn$" && test_must_fail git svn init "${svnrepo}2/bar" ' @@ -236,7 +243,7 @@ test_expect_success \ git config --get svn-remote.svn.fetch \ "^bar:refs/remotes/bar$" && git config --get svn-remote.svn.fetch \ - "^:refs/${remotes_git_svn}$" + "^:refs/remotes/git-svn$" ' test_expect_success 'dcommit $rev does not clobber current branch' ' @@ -258,26 +265,26 @@ test_expect_success 'dcommit $rev does not clobber current branch' ' git branch -D my-bar ' -test_expect_success 'able to dcommit to a subdirectory' " +test_expect_success 'able to dcommit to a subdirectory' ' git svn fetch -i bar && git checkout -b my-bar refs/remotes/bar && echo abc > d && git update-index --add d && - git commit -m '/bar/d should be in the log' && + git commit -m "/bar/d should be in the log" && git svn dcommit -i bar && - test -z \"\`git diff refs/heads/my-bar refs/remotes/bar\`\" && + test -z "$(git diff refs/heads/my-bar refs/remotes/bar)" && mkdir newdir && echo new > newdir/dir && git update-index --add newdir/dir && - git commit -m 'add a new directory' && + git commit -m "add a new directory" && git svn dcommit -i bar && - test -z \"\`git diff refs/heads/my-bar refs/remotes/bar\`\" && + test -z "$(git diff refs/heads/my-bar refs/remotes/bar)" && echo foo >> newdir/dir && git update-index newdir/dir && - git commit -m 'modify a file in new directory' && + git commit -m "modify a file in new directory" && git svn dcommit -i bar && - test -z \"\`git diff refs/heads/my-bar refs/remotes/bar\`\" - " + test -z "$(git diff refs/heads/my-bar refs/remotes/bar)" +' test_expect_success 'dcommit should not fail with a touched file' ' test_commit "commit-new-file-foo2" foo2 && @@ -290,13 +297,13 @@ test_expect_success 'rebase should not fail with a touched file' ' git svn rebase ' -test_expect_success 'able to set-tree to a subdirectory' " +test_expect_success 'able to set-tree to a subdirectory' ' echo cba > d && git update-index d && - git commit -m 'update /bar/d' && + git commit -m "update /bar/d" && git svn set-tree -i bar HEAD && - test -z \"\`git diff refs/heads/my-bar refs/remotes/bar\`\" - " + test -z "$(git diff refs/heads/my-bar refs/remotes/bar)" +' test_expect_success 'git-svn works in a bare repository' ' mkdir bare-repo && diff --git a/t/t9101-git-svn-props.sh b/t/t9101-git-svn-props.sh index 8869f5018e..07bfb63777 100755 --- a/t/t9101-git-svn-props.sh +++ b/t/t9101-git-svn-props.sh @@ -26,27 +26,27 @@ cd import EOF printf "Hello\r\nWorld\r\n" > crlf - a_crlf=`git hash-object -w crlf` + a_crlf=$(git hash-object -w crlf) printf "Hello\rWorld\r" > cr - a_cr=`git hash-object -w cr` + a_cr=$(git hash-object -w cr) printf "Hello\nWorld\n" > lf - a_lf=`git hash-object -w lf` + a_lf=$(git hash-object -w lf) printf "Hello\r\nWorld" > ne_crlf - a_ne_crlf=`git hash-object -w ne_crlf` + a_ne_crlf=$(git hash-object -w ne_crlf) printf "Hello\nWorld" > ne_lf - a_ne_lf=`git hash-object -w ne_lf` + a_ne_lf=$(git hash-object -w ne_lf) printf "Hello\rWorld" > ne_cr - a_ne_cr=`git hash-object -w ne_cr` + a_ne_cr=$(git hash-object -w ne_cr) touch empty - a_empty=`git hash-object -w empty` + a_empty=$(git hash-object -w empty) printf "\n" > empty_lf - a_empty_lf=`git hash-object -w empty_lf` + a_empty_lf=$(git hash-object -w empty_lf) printf "\r" > empty_cr - a_empty_cr=`git hash-object -w empty_cr` + a_empty_cr=$(git hash-object -w empty_cr) printf "\r\n" > empty_crlf - a_empty_crlf=`git hash-object -w empty_crlf` + a_empty_crlf=$(git hash-object -w empty_crlf) svn_cmd import --no-auto-props -m 'import for git svn' . "$svnrepo" >/dev/null cd .. @@ -73,14 +73,14 @@ test_expect_success 'fetch revisions from svn' 'git svn fetch' name='test svn:keywords ignoring' test_expect_success "$name" \ - 'git checkout -b mybranch ${remotes_git_svn} && + 'git checkout -b mybranch remotes/git-svn && echo Hi again >> kw.c && git commit -a -m "test keywords ignoring" && - git svn set-tree ${remotes_git_svn}..mybranch && - git pull . ${remotes_git_svn}' + git svn set-tree remotes/git-svn..mybranch && + git pull . remotes/git-svn' expect='/* $Id$ */' -got="`sed -ne 2p kw.c`" +got="$(sed -ne 2p kw.c)" test_expect_success 'raw $Id$ found in kw.c' "test '$expect' = '$got'" test_expect_success "propset CR on crlf files" ' @@ -95,7 +95,7 @@ test_expect_success "propset CR on crlf files" ' test_expect_success 'fetch and pull latest from svn and checkout a new wc' \ 'git svn fetch && - git pull . ${remotes_git_svn} && + git pull . remotes/git-svn && svn_cmd co "$svnrepo" new_wc' for i in crlf ne_crlf lf ne_lf cr ne_cr empty_cr empty_lf empty empty_crlf @@ -107,8 +107,8 @@ done cd test_wc printf '$Id$\rHello\rWorld\r' > cr printf '$Id$\rHello\rWorld' > ne_cr - a_cr=`printf '$Id$\r\nHello\r\nWorld\r\n' | git hash-object --stdin` - a_ne_cr=`printf '$Id$\r\nHello\r\nWorld' | git hash-object --stdin` + a_cr=$(printf '$Id$\r\nHello\r\nWorld\r\n' | git hash-object --stdin) + a_ne_cr=$(printf '$Id$\r\nHello\r\nWorld' | git hash-object --stdin) test_expect_success 'Set CRLF on cr files' \ 'svn_cmd propset svn:eol-style CRLF cr && svn_cmd propset svn:eol-style CRLF ne_cr && @@ -117,10 +117,10 @@ cd test_wc svn_cmd commit -m "propset CRLF on cr files"' cd .. test_expect_success 'fetch and pull latest from svn' \ - 'git svn fetch && git pull . ${remotes_git_svn}' + 'git svn fetch && git pull . remotes/git-svn' -b_cr="`git hash-object cr`" -b_ne_cr="`git hash-object ne_cr`" +b_cr="$(git hash-object cr)" +b_ne_cr="$(git hash-object ne_cr)" test_expect_success 'CRLF + $Id$' "test '$a_cr' = '$b_cr'" test_expect_success 'CRLF + $Id$ (no newline)' "test '$a_ne_cr' = '$b_ne_cr'" @@ -168,7 +168,7 @@ cat >create-ignore-index.expect <<\EOF EOF test_expect_success 'test create-ignore' " - git svn fetch && git pull . ${remotes_git_svn} && + git svn fetch && git pull . remotes/git-svn && git svn create-ignore && cmp ./.gitignore create-ignore.expect && cmp ./deeply/.gitignore create-ignore.expect && diff --git a/t/t9102-git-svn-deep-rmdir.sh b/t/t9102-git-svn-deep-rmdir.sh index eb70f4839c..66cd51102c 100755 --- a/t/t9102-git-svn-deep-rmdir.sh +++ b/t/t9102-git-svn-deep-rmdir.sh @@ -17,7 +17,7 @@ test_expect_success 'initialize repo' ' test_expect_success 'mirror via git svn' ' git svn init "$svnrepo" && git svn fetch && - git checkout -f -b test-rmdir ${remotes_git_svn} + git checkout -f -b test-rmdir remotes/git-svn ' test_expect_success 'Try a commit on rmdir' ' diff --git a/t/t9103-git-svn-tracked-directory-removed.sh b/t/t9103-git-svn-tracked-directory-removed.sh index 3413164cb1..b28271345c 100755 --- a/t/t9103-git-svn-tracked-directory-removed.sh +++ b/t/t9103-git-svn-tracked-directory-removed.sh @@ -23,17 +23,19 @@ test_expect_success 'make history for tracking' ' test_expect_success 'clone repo with git' ' git svn clone -s "$svnrepo" x && - test -f x/FOLLOWME && - test ! -f x/README + test_path_is_file x/FOLLOWME && + test_path_is_missing x/README ' -test_expect_success 'make sure r2 still has old file' " - cd x && - test -n \"\$(git svn find-rev r1)\" && - git reset --hard \$(git svn find-rev r1) && - test -f README && - test ! -f FOLLOWME && - test x\$(git svn find-rev r2) = x -" +test_expect_success 'make sure r2 still has old file' ' + ( + cd x && + test -n "$(git svn find-rev r1)" && + git reset --hard "$(git svn find-rev r1)" && + test_path_is_file README && + test_path_is_missing FOLLOWME && + test -z "$(git svn find-rev r2)" + ) +' test_done diff --git a/t/t9104-git-svn-follow-parent.sh b/t/t9104-git-svn-follow-parent.sh index 83f17e13e8..cd480edf16 100755 --- a/t/t9104-git-svn-follow-parent.sh +++ b/t/t9104-git-svn-follow-parent.sh @@ -31,12 +31,12 @@ test_expect_success 'initialize repo' ' test_expect_success 'init and fetch a moved directory' ' git svn init --minimize-url -i thunk "$svnrepo"/thunk && git svn fetch -i thunk && - test "`git rev-parse --verify refs/remotes/thunk@2`" \ - = "`git rev-parse --verify refs/remotes/thunk~1`" && - test "`git cat-file blob refs/remotes/thunk:readme |\ - sed -n -e "3p"`" = goodbye && - test -z "`git config --get svn-remote.svn.fetch \ - "^trunk:refs/remotes/thunk@2$"`" + test "$(git rev-parse --verify refs/remotes/thunk@2)" \ + = "$(git rev-parse --verify refs/remotes/thunk~1)" && + test "$(git cat-file blob refs/remotes/thunk:readme |\ + sed -n -e "3p")" = goodbye && + test -z "$(git config --get svn-remote.svn.fetch \ + "^trunk:refs/remotes/thunk@2$")" ' test_expect_success 'init and fetch from one svn-remote' ' @@ -46,10 +46,10 @@ test_expect_success 'init and fetch from one svn-remote' ' git config --add svn-remote.svn.fetch \ thunk:refs/remotes/svn/thunk && git svn fetch -i svn/thunk && - test "`git rev-parse --verify refs/remotes/svn/trunk`" \ - = "`git rev-parse --verify refs/remotes/svn/thunk~1`" && - test "`git cat-file blob refs/remotes/svn/thunk:readme |\ - sed -n -e "3p"`" = goodbye + test "$(git rev-parse --verify refs/remotes/svn/trunk)" \ + = "$(git rev-parse --verify refs/remotes/svn/thunk~1)" && + test "$(git cat-file blob refs/remotes/svn/thunk:readme |\ + sed -n -e "3p")" = goodbye ' test_expect_success 'follow deleted parent' ' @@ -61,9 +61,9 @@ test_expect_success 'follow deleted parent' ' junk:refs/remotes/svn/junk && git svn fetch -i svn/thunk && git svn fetch -i svn/junk && - test -z "`git diff svn/junk svn/trunk`" && - test "`git merge-base svn/junk svn/trunk`" \ - = "`git rev-parse svn/trunk`" + test -z "$(git diff svn/junk svn/trunk)" && + test "$(git merge-base svn/junk svn/trunk)" \ + = "$(git rev-parse svn/trunk)" ' test_expect_success 'follow larger parent' ' @@ -80,10 +80,10 @@ test_expect_success 'follow larger parent' ' git rev-parse --verify refs/remotes/larger && git rev-parse --verify \ refs/remotes/larger-parent && - test "`git merge-base \ + test "$(git merge-base \ refs/remotes/larger-parent \ - refs/remotes/larger`" = \ - "`git rev-parse refs/remotes/larger`" + refs/remotes/larger)" = \ + "$(git rev-parse refs/remotes/larger)" ' test_expect_success 'follow higher-level parent' ' @@ -106,8 +106,8 @@ test_expect_success 'follow deleted directory' ' svn_cmd rm -m "remove glob" "$svnrepo"/glob && git svn init --minimize-url -i glob "$svnrepo"/glob && git svn fetch -i glob && - test "`git cat-file blob refs/remotes/glob:blob/bye`" = hi && - test "`git ls-tree refs/remotes/glob | wc -l `" -eq 1 + test "$(git cat-file blob refs/remotes/glob:blob/bye)" = hi && + test "$(git ls-tree refs/remotes/glob | wc -l )" -eq 1 ' # ref: r9270 of the Subversion repository: (http://svn.collab.net/repos/svn) @@ -142,9 +142,9 @@ test_expect_success 'follow-parent avoids deleting relevant info' ' git svn init --minimize-url -i r9270-t \ "$svnrepo"/r9270/trunk/subversion/bindings/swig/perl/native/t && git svn fetch -i r9270-t && - test `git rev-list r9270-t | wc -l` -eq 2 && - test "`git ls-tree --name-only r9270-t~1`" = \ - "`git ls-tree --name-only r9270-t`" + test $(git rev-list r9270-t | wc -l) -eq 2 && + test "$(git ls-tree --name-only r9270-t~1)" = \ + "$(git ls-tree --name-only r9270-t)" ' test_expect_success "track initial change if it was only made to parent" ' @@ -152,11 +152,11 @@ test_expect_success "track initial change if it was only made to parent" ' git svn init --minimize-url -i r9270-d \ "$svnrepo"/r9270/drunk/subversion/bindings/swig/perl/native/t && git svn fetch -i r9270-d && - test `git rev-list r9270-d | wc -l` -eq 3 && - test "`git ls-tree --name-only r9270-t`" = \ - "`git ls-tree --name-only r9270-d`" && - test "`git rev-parse r9270-t`" = \ - "`git rev-parse r9270-d~1`" + test $(git rev-list r9270-d | wc -l) -eq 3 && + test "$(git ls-tree --name-only r9270-t)" = \ + "$(git ls-tree --name-only r9270-d)" && + test "$(git rev-parse r9270-t)" = \ + "$(git rev-parse r9270-d~1)" ' test_expect_success "follow-parent is atomic" ' @@ -193,19 +193,19 @@ test_expect_success "follow-parent is atomic" ' git svn fetch -i stunk && git svn init --minimize-url -i flunked "$svnrepo"/flunked && git svn fetch -i flunked && - test "`git rev-parse --verify refs/remotes/flunk@18`" \ - = "`git rev-parse --verify refs/remotes/stunk`" && - test "`git rev-parse --verify refs/remotes/flunk~1`" \ - = "`git rev-parse --verify refs/remotes/stunk`" && - test "`git rev-parse --verify refs/remotes/flunked~1`" \ - = "`git rev-parse --verify refs/remotes/stunk~1`" + test "$(git rev-parse --verify refs/remotes/flunk@18)" \ + = "$(git rev-parse --verify refs/remotes/stunk)" && + test "$(git rev-parse --verify refs/remotes/flunk~1)" \ + = "$(git rev-parse --verify refs/remotes/stunk)" && + test "$(git rev-parse --verify refs/remotes/flunked~1)" \ + = "$(git rev-parse --verify refs/remotes/stunk~1)" ' test_expect_success "track multi-parent paths" ' svn_cmd cp -m "resurrect /glob" "$svnrepo"/r9270 "$svnrepo"/glob && git svn multi-fetch && - test `git cat-file commit refs/remotes/glob | \ - grep "^parent " | wc -l` -eq 2 + test $(git cat-file commit refs/remotes/glob | \ + grep "^parent " | wc -l) -eq 2 ' test_expect_success "multi-fetch continues to work" " diff --git a/t/t9105-git-svn-commit-diff.sh b/t/t9105-git-svn-commit-diff.sh index 5d0afeae6c..6ed5f74e25 100755 --- a/t/t9105-git-svn-commit-diff.sh +++ b/t/t9105-git-svn-commit-diff.sh @@ -18,8 +18,8 @@ test_expect_success 'initialize repo' ' git commit -a -m "another" ' -head=`git rev-parse --verify HEAD^0` -prev=`git rev-parse --verify HEAD^1` +head=$(git rev-parse --verify HEAD^0) +prev=$(git rev-parse --verify HEAD^1) # the internals of the commit-diff command are the same as the regular # commit, so only a basic test of functionality is needed since we've diff --git a/t/t9106-git-svn-commit-diff-clobber.sh b/t/t9106-git-svn-commit-diff-clobber.sh index f6d7ac7c5f..dbe8deac0d 100755 --- a/t/t9106-git-svn-commit-diff-clobber.sh +++ b/t/t9106-git-svn-commit-diff-clobber.sh @@ -44,7 +44,7 @@ test_expect_success 'commit complementing change from git' ' test_expect_success 'dcommit fails to commit because of conflict' ' git svn init "$svnrepo" && git svn fetch && - git reset --hard refs/${remotes_git_svn} && + git reset --hard refs/remotes/git-svn && svn_cmd co "$svnrepo" t.svn && ( cd t.svn && @@ -59,7 +59,7 @@ test_expect_success 'dcommit fails to commit because of conflict' ' ' test_expect_success 'dcommit does the svn equivalent of an index merge' " - git reset --hard refs/${remotes_git_svn} && + git reset --hard refs/remotes/git-svn && echo 'index merge' > file2 && git update-index --add file2 && git commit -a -m 'index merge' && @@ -81,7 +81,7 @@ test_expect_success 'commit another change from svn side' ' ' test_expect_success 'multiple dcommit from git svn will not clobber svn' " - git reset --hard refs/${remotes_git_svn} && + git reset --hard refs/remotes/git-svn && echo new file >> new-file && git update-index --add new-file && git commit -a -m 'new file' && diff --git a/t/t9107-git-svn-migrate.sh b/t/t9107-git-svn-migrate.sh index 6e69fc4c65..9f3ef8f2ef 100755 --- a/t/t9107-git-svn-migrate.sh +++ b/t/t9107-git-svn-migrate.sh @@ -19,15 +19,16 @@ test_expect_success 'setup old-looking metadata' ' git svn init "$svnrepo" && git svn fetch && rm -rf "$GIT_DIR"/svn && - git update-ref refs/heads/git-svn-HEAD refs/${remotes_git_svn} && - git update-ref refs/heads/svn-HEAD refs/${remotes_git_svn} && - git update-ref -d refs/${remotes_git_svn} refs/${remotes_git_svn} + git update-ref refs/heads/git-svn-HEAD refs/remotes/git-svn && + git update-ref refs/heads/svn-HEAD refs/remotes/git-svn && + git update-ref -d refs/remotes/git-svn refs/remotes/git-svn ' -head=`git rev-parse --verify refs/heads/git-svn-HEAD^0` -test_expect_success 'git-svn-HEAD is a real HEAD' "test -n '$head'" +test_expect_success 'git-svn-HEAD is a real HEAD' ' + git rev-parse --verify refs/heads/git-svn-HEAD^0 +' -svnrepo_escaped=`echo $svnrepo | sed 's/ /%20/'` +svnrepo_escaped=$(echo $svnrepo | sed 's/ /%20/') test_expect_success 'initialize old-style (v0) git svn layout' ' mkdir -p "$GIT_DIR"/git-svn/info "$GIT_DIR"/svn/info && @@ -35,30 +36,32 @@ test_expect_success 'initialize old-style (v0) git svn layout' ' echo "$svnrepo" > "$GIT_DIR"/svn/info/url && git svn migrate && ! test -d "$GIT_DIR"/git-svn && - git rev-parse --verify refs/${remotes_git_svn}^0 && + git rev-parse --verify refs/remotes/git-svn^0 && git rev-parse --verify refs/remotes/svn^0 && test "$(git config --get svn-remote.svn.url)" = "$svnrepo_escaped" && - test `git config --get svn-remote.svn.fetch` = \ - ":refs/${remotes_git_svn}" + test $(git config --get svn-remote.svn.fetch) = \ + ":refs/remotes/git-svn" ' test_expect_success 'initialize a multi-repository repo' ' git svn init "$svnrepo" -T trunk -t tags -b branches && git config --get-all svn-remote.svn.fetch > fetch.out && grep "^trunk:refs/remotes/origin/trunk$" fetch.out && - test -n "`git config --get svn-remote.svn.branches \ - "^branches/\*:refs/remotes/origin/\*$"`" && - test -n "`git config --get svn-remote.svn.tags \ - "^tags/\*:refs/remotes/origin/tags/\*$"`" && + test -n "$(git config --get svn-remote.svn.branches \ + "^branches/\*:refs/remotes/origin/\*$")" && + test -n "$(git config --get svn-remote.svn.tags \ + "^tags/\*:refs/remotes/origin/tags/\*$")" && git config --unset svn-remote.svn.branches \ "^branches/\*:refs/remotes/origin/\*$" && git config --unset svn-remote.svn.tags \ "^tags/\*:refs/remotes/origin/tags/\*$" && git config --add svn-remote.svn.fetch "branches/a:refs/remotes/origin/a" && git config --add svn-remote.svn.fetch "branches/b:refs/remotes/origin/b" && - for i in tags/0.1 tags/0.2 tags/0.3; do + for i in tags/0.1 tags/0.2 tags/0.3 + do git config --add svn-remote.svn.fetch \ - $i:refs/remotes/origin/$i || exit 1; done && + $i:refs/remotes/origin/$i || return 1 + done && git config --get-all svn-remote.svn.fetch > fetch.out && grep "^trunk:refs/remotes/origin/trunk$" fetch.out && grep "^branches/a:refs/remotes/origin/a$" fetch.out && @@ -66,37 +69,45 @@ test_expect_success 'initialize a multi-repository repo' ' grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out && grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out && grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out && - grep "^:refs/${remotes_git_svn}" fetch.out + grep "^:refs/remotes/git-svn" fetch.out ' # refs should all be different, but the trees should all be the same: -test_expect_success 'multi-fetch works on partial urls + paths' " +test_expect_success 'multi-fetch works on partial urls + paths' ' + refs="trunk a b tags/0.1 tags/0.2 tags/0.3" && git svn multi-fetch && - for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do - git rev-parse --verify refs/remotes/origin/\$i^0 >> refs.out || exit 1; - done && - test -z \"\`sort < refs.out | uniq -d\`\" && - for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do - for j in trunk a b tags/0.1 tags/0.2 tags/0.3; do - if test \$j != \$i; then continue; fi - test -z \"\`git diff refs/remotes/origin/\$i \ - refs/remotes/origin/\$j\`\" ||exit 1; done; done - " + for i in $refs + do + git rev-parse --verify refs/remotes/origin/$i^0 || return 1; + done >refs.out && + test -z "$(sort <refs.out | uniq -d)" && + for i in $refs + do + for j in $refs + do + git diff --exit-code refs/remotes/origin/$i \ + refs/remotes/origin/$j || + return 1 + done + done +' test_expect_success 'migrate --minimize on old inited layout' ' git config --unset-all svn-remote.svn.fetch && git config --unset-all svn-remote.svn.url && rm -rf "$GIT_DIR"/svn && - for i in `cat fetch.out`; do - path=`expr $i : "\([^:]*\):.*$"` - ref=`expr $i : "[^:]*:\(refs/remotes/.*\)$"` + for i in $(cat fetch.out) + do + path=$(expr $i : "\([^:]*\):.*$") + ref=$(expr $i : "[^:]*:\(refs/remotes/.*\)$") if test -z "$ref"; then continue; fi if test -n "$path"; then path="/$path"; fi - ( mkdir -p "$GIT_DIR"/svn/$ref/info/ && - echo "$svnrepo"$path > "$GIT_DIR"/svn/$ref/info/url ) || exit 1; + mkdir -p "$GIT_DIR"/svn/$ref/info/ && + echo "$svnrepo"$path >"$GIT_DIR"/svn/$ref/info/url || + return 1 done && git svn migrate --minimize && - test -z "`git config -l | grep "^svn-remote\.git-svn\."`" && + test -z "$(git config -l | grep "^svn-remote\.git-svn\.")" && git config --get-all svn-remote.svn.fetch > fetch.out && grep "^trunk:refs/remotes/origin/trunk$" fetch.out && grep "^branches/a:refs/remotes/origin/a$" fetch.out && @@ -104,7 +115,7 @@ test_expect_success 'migrate --minimize on old inited layout' ' grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out && grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out && grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out && - grep "^:refs/${remotes_git_svn}" fetch.out + grep "^:refs/remotes/git-svn" fetch.out ' test_expect_success ".rev_db auto-converted to .rev_map.UUID" ' diff --git a/t/t9108-git-svn-glob.sh b/t/t9108-git-svn-glob.sh index d732d31302..a94286c8ec 100755 --- a/t/t9108-git-svn-glob.sh +++ b/t/t9108-git-svn-glob.sh @@ -50,10 +50,10 @@ test_expect_success 'test refspec globbing' ' git log --pretty=oneline refs/remotes/tags/end | \ sed -e "s/^.\{41\}//" > output.end && test_cmp expect.end output.end && - test "`git rev-parse refs/remotes/tags/end~1`" = \ - "`git rev-parse refs/remotes/branches/start`" && - test "`git rev-parse refs/remotes/branches/start~2`" = \ - "`git rev-parse refs/remotes/trunk`" && + test "$(git rev-parse refs/remotes/tags/end~1)" = \ + "$(git rev-parse refs/remotes/branches/start)" && + test "$(git rev-parse refs/remotes/branches/start~2)" = \ + "$(git rev-parse refs/remotes/trunk)" && test_must_fail git rev-parse refs/remotes/tags/end@3 ' @@ -75,20 +75,23 @@ test_expect_success 'test left-hand-side only globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test `git rev-list refs/remotes/two/tags/end | wc -l` -eq 6 && - test `git rev-list refs/remotes/two/branches/start | wc -l` -eq 3 && - test `git rev-parse refs/remotes/two/branches/start~2` = \ - `git rev-parse refs/remotes/two/trunk` && - test `git rev-parse refs/remotes/two/tags/end~3` = \ - `git rev-parse refs/remotes/two/branches/start` && + test $(git rev-list refs/remotes/two/tags/end | wc -l) -eq 6 && + test $(git rev-list refs/remotes/two/branches/start | wc -l) -eq 3 && + test $(git rev-parse refs/remotes/two/branches/start~2) = \ + $(git rev-parse refs/remotes/two/trunk) && + test $(git rev-parse refs/remotes/two/tags/end~3) = \ + $(git rev-parse refs/remotes/two/branches/start) && git log --pretty=oneline refs/remotes/two/tags/end | \ sed -e "s/^.\{41\}//" > output.two && test_cmp expect.two output.two ' -echo "Only one set of wildcard directories" \ - "(e.g. '*' or '*/*/*') is supported: 'branches/*/t/*'" > expect.three -echo "" >> expect.three +test_expect_success 'prepare test disallow multi-globs' " +cat >expect.three <<EOF +Only one set of wildcards (e.g. '*' or '*/*/*') is supported: branches/*/t/* + +EOF + " test_expect_success 'test disallow multi-globs' ' git config --add svn-remote.three.url "$svnrepo" && diff --git a/t/t9109-git-svn-multi-glob.sh b/t/t9109-git-svn-multi-glob.sh index c318f9f946..8d99e848d4 100755 --- a/t/t9109-git-svn-multi-glob.sh +++ b/t/t9109-git-svn-multi-glob.sh @@ -50,10 +50,10 @@ test_expect_success 'test refspec globbing' ' git log --pretty=oneline refs/remotes/tags/end | \ sed -e "s/^.\{41\}//" > output.end && test_cmp expect.end output.end && - test "`git rev-parse refs/remotes/tags/end~1`" = \ - "`git rev-parse refs/remotes/branches/v1/start`" && - test "`git rev-parse refs/remotes/branches/v1/start~2`" = \ - "`git rev-parse refs/remotes/trunk`" && + test "$(git rev-parse refs/remotes/tags/end~1)" = \ + "$(git rev-parse refs/remotes/branches/v1/start)" && + test "$(git rev-parse refs/remotes/branches/v1/start~2)" = \ + "$(git rev-parse refs/remotes/trunk)" && test_must_fail git rev-parse refs/remotes/tags/end@3 ' @@ -75,12 +75,12 @@ test_expect_success 'test left-hand-side only globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test `git rev-list refs/remotes/two/tags/end | wc -l` -eq 6 && - test `git rev-list refs/remotes/two/branches/v1/start | wc -l` -eq 3 && - test `git rev-parse refs/remotes/two/branches/v1/start~2` = \ - `git rev-parse refs/remotes/two/trunk` && - test `git rev-parse refs/remotes/two/tags/end~3` = \ - `git rev-parse refs/remotes/two/branches/v1/start` && + test $(git rev-list refs/remotes/two/tags/end | wc -l) -eq 6 && + test $(git rev-list refs/remotes/two/branches/v1/start | wc -l) -eq 3 && + test $(git rev-parse refs/remotes/two/branches/v1/start~2) = \ + $(git rev-parse refs/remotes/two/trunk) && + test $(git rev-parse refs/remotes/two/tags/end~3) = \ + $(git rev-parse refs/remotes/two/branches/v1/start) && git log --pretty=oneline refs/remotes/two/tags/end | \ sed -e "s/^.\{41\}//" > output.two && test_cmp expect.two output.two @@ -124,20 +124,23 @@ test_expect_success 'test another branch' ' git config --add svn-remote.four.tags \ "tags/*:refs/remotes/four/tags/*" && git svn fetch four && - test `git rev-list refs/remotes/four/tags/next | wc -l` -eq 5 && - test `git rev-list refs/remotes/four/branches/v2/start | wc -l` -eq 3 && - test `git rev-parse refs/remotes/four/branches/v2/start~2` = \ - `git rev-parse refs/remotes/four/trunk` && - test `git rev-parse refs/remotes/four/tags/next~2` = \ - `git rev-parse refs/remotes/four/branches/v2/start` && + test $(git rev-list refs/remotes/four/tags/next | wc -l) -eq 5 && + test $(git rev-list refs/remotes/four/branches/v2/start | wc -l) -eq 3 && + test $(git rev-parse refs/remotes/four/branches/v2/start~2) = \ + $(git rev-parse refs/remotes/four/trunk) && + test $(git rev-parse refs/remotes/four/tags/next~2) = \ + $(git rev-parse refs/remotes/four/branches/v2/start) && git log --pretty=oneline refs/remotes/four/tags/next | \ sed -e "s/^.\{41\}//" > output.four && test_cmp expect.four output.four ' -echo "Only one set of wildcard directories" \ - "(e.g. '*' or '*/*/*') is supported: 'branches/*/t/*'" > expect.three -echo "" >> expect.three +test_expect_success 'prepare test disallow multiple globs' " +cat >expect.three <<EOF +Only one set of wildcards (e.g. '*' or '*/*/*') is supported: branches/*/t/* + +EOF + " test_expect_success 'test disallow multiple globs' ' git config --add svn-remote.three.url "$svnrepo" && diff --git a/t/t9110-git-svn-use-svm-props.sh b/t/t9110-git-svn-use-svm-props.sh index a06e4c5b8e..dde0a3c222 100755 --- a/t/t9110-git-svn-use-svm-props.sh +++ b/t/t9110-git-svn-use-svm-props.sh @@ -22,36 +22,36 @@ uuid=161ce429-a9dd-4828-af4a-52023f968c89 bar_url=http://mayonaise/svnrepo/bar test_expect_success 'verify metadata for /bar' " git cat-file commit refs/remotes/bar | \ - grep '^${git_svn_id}: $bar_url@12 $uuid$' && + grep '^git-svn-id: $bar_url@12 $uuid$' && git cat-file commit refs/remotes/bar~1 | \ - grep '^${git_svn_id}: $bar_url@11 $uuid$' && + grep '^git-svn-id: $bar_url@11 $uuid$' && git cat-file commit refs/remotes/bar~2 | \ - grep '^${git_svn_id}: $bar_url@10 $uuid$' && + grep '^git-svn-id: $bar_url@10 $uuid$' && git cat-file commit refs/remotes/bar~3 | \ - grep '^${git_svn_id}: $bar_url@9 $uuid$' && + grep '^git-svn-id: $bar_url@9 $uuid$' && git cat-file commit refs/remotes/bar~4 | \ - grep '^${git_svn_id}: $bar_url@6 $uuid$' && + grep '^git-svn-id: $bar_url@6 $uuid$' && git cat-file commit refs/remotes/bar~5 | \ - grep '^${git_svn_id}: $bar_url@1 $uuid$' + grep '^git-svn-id: $bar_url@1 $uuid$' " e_url=http://mayonaise/svnrepo/dir/a/b/c/d/e test_expect_success 'verify metadata for /dir/a/b/c/d/e' " git cat-file commit refs/remotes/e | \ - grep '^${git_svn_id}: $e_url@1 $uuid$' + grep '^git-svn-id: $e_url@1 $uuid$' " dir_url=http://mayonaise/svnrepo/dir test_expect_success 'verify metadata for /dir' " git cat-file commit refs/remotes/dir | \ - grep '^${git_svn_id}: $dir_url@2 $uuid$' && + grep '^git-svn-id: $dir_url@2 $uuid$' && git cat-file commit refs/remotes/dir~1 | \ - grep '^${git_svn_id}: $dir_url@1 $uuid$' + grep '^git-svn-id: $dir_url@1 $uuid$' " test_expect_success 'find commit based on SVN revision number' " git svn find-rev r12 | - grep `git rev-parse HEAD` + grep $(git rev-parse HEAD) " test_expect_success 'empty rebase' " diff --git a/t/t9111-git-svn-use-svnsync-props.sh b/t/t9111-git-svn-use-svnsync-props.sh index bd081c2ec3..22b6e5ee7d 100755 --- a/t/t9111-git-svn-use-svnsync-props.sh +++ b/t/t9111-git-svn-use-svnsync-props.sh @@ -21,31 +21,31 @@ uuid=161ce429-a9dd-4828-af4a-52023f968c89 bar_url=http://mayonaise/svnrepo/bar test_expect_success 'verify metadata for /bar' " git cat-file commit refs/remotes/bar | \ - grep '^${git_svn_id}: $bar_url@12 $uuid$' && + grep '^git-svn-id: $bar_url@12 $uuid$' && git cat-file commit refs/remotes/bar~1 | \ - grep '^${git_svn_id}: $bar_url@11 $uuid$' && + grep '^git-svn-id: $bar_url@11 $uuid$' && git cat-file commit refs/remotes/bar~2 | \ - grep '^${git_svn_id}: $bar_url@10 $uuid$' && + grep '^git-svn-id: $bar_url@10 $uuid$' && git cat-file commit refs/remotes/bar~3 | \ - grep '^${git_svn_id}: $bar_url@9 $uuid$' && + grep '^git-svn-id: $bar_url@9 $uuid$' && git cat-file commit refs/remotes/bar~4 | \ - grep '^${git_svn_id}: $bar_url@6 $uuid$' && + grep '^git-svn-id: $bar_url@6 $uuid$' && git cat-file commit refs/remotes/bar~5 | \ - grep '^${git_svn_id}: $bar_url@1 $uuid$' + grep '^git-svn-id: $bar_url@1 $uuid$' " e_url=http://mayonaise/svnrepo/dir/a/b/c/d/e test_expect_success 'verify metadata for /dir/a/b/c/d/e' " git cat-file commit refs/remotes/e | \ - grep '^${git_svn_id}: $e_url@1 $uuid$' + grep '^git-svn-id: $e_url@1 $uuid$' " dir_url=http://mayonaise/svnrepo/dir test_expect_success 'verify metadata for /dir' " git cat-file commit refs/remotes/dir | \ - grep '^${git_svn_id}: $dir_url@2 $uuid$' && + grep '^git-svn-id: $dir_url@2 $uuid$' && git cat-file commit refs/remotes/dir~1 | \ - grep '^${git_svn_id}: $dir_url@1 $uuid$' + grep '^git-svn-id: $dir_url@1 $uuid$' " test_done diff --git a/t/t9114-git-svn-dcommit-merge.sh b/t/t9114-git-svn-dcommit-merge.sh index fb41876677..a3d388228a 100755 --- a/t/t9114-git-svn-dcommit-merge.sh +++ b/t/t9114-git-svn-dcommit-merge.sh @@ -68,8 +68,8 @@ test_expect_success 'setup git mirror and merge' ' test_debug 'gitk --all & sleep 1' test_expect_success 'verify pre-merge ancestry' " - test x\`git rev-parse --verify refs/heads/svn^2\` = \ - x\`git rev-parse --verify refs/heads/merge\` && + test x\$(git rev-parse --verify refs/heads/svn^2) = \ + x\$(git rev-parse --verify refs/heads/merge) && git cat-file commit refs/heads/svn^ | grep '^friend$' " @@ -80,10 +80,10 @@ test_expect_success 'git svn dcommit merges' " test_debug 'gitk --all & sleep 1' test_expect_success 'verify post-merge ancestry' " - test x\`git rev-parse --verify refs/heads/svn\` = \ - x\`git rev-parse --verify refs/remotes/origin/trunk \` && - test x\`git rev-parse --verify refs/heads/svn^2\` = \ - x\`git rev-parse --verify refs/heads/merge\` && + test x\$(git rev-parse --verify refs/heads/svn) = \ + x\$(git rev-parse --verify refs/remotes/origin/trunk) && + test x\$(git rev-parse --verify refs/heads/svn^2) = \ + x\$(git rev-parse --verify refs/heads/merge) && git cat-file commit refs/heads/svn^ | grep '^friend$' " diff --git a/t/t9115-git-svn-dcommit-funky-renames.sh b/t/t9115-git-svn-dcommit-funky-renames.sh index 6a48e40429..64bb495834 100755 --- a/t/t9115-git-svn-dcommit-funky-renames.sh +++ b/t/t9115-git-svn-dcommit-funky-renames.sh @@ -8,9 +8,10 @@ test_description='git svn dcommit can commit renames of files with ugly names' . ./lib-git-svn.sh test_expect_success 'load repository with strange names' ' - svnadmin load -q "$rawsvnrepo" < "$TEST_DIRECTORY"/t9115/funky-names.dump && - start_httpd gtk+ - ' + svnadmin load -q "$rawsvnrepo" <"$TEST_DIRECTORY"/t9115/funky-names.dump +' + +maybe_start_httpd gtk+ test_expect_success 'init and fetch repository' ' git svn init "$svnrepo" && @@ -77,11 +78,47 @@ test_expect_success 'make a commit to test rebase' ' ' test_expect_success 'git svn rebase works inside a fresh-cloned repository' ' - cd test-rebase && + ( + cd test-rebase && git svn rebase && test -e test-rebase-main && test -e test-rebase - ' + )' + +# Without this, LC_ALL=C as set in test-lib.sh, and Cygwin converts +# non-ASCII characters in filenames unexpectedly, and causes errors. +# https://cygwin.com/cygwin-ug-net/using-specialnames.html#pathnames-specialchars +# > Some characters are disallowed in filenames on Windows filesystems. ... +# ... +# > ... All of the above characters, except for the backslash, are converted +# > to special UNICODE characters in the range 0xf000 to 0xf0ff (the +# > "Private use area") when creating or accessing files. +prepare_a_utf8_locale +test_expect_success UTF8,!MINGW,!UTF8_NFD_TO_NFC 'svn.pathnameencoding=cp932 new file on dcommit' ' + LC_ALL=$a_utf8_locale && + export LC_ALL && + neq=$(printf "\201\202") && + git config svn.pathnameencoding cp932 && + echo neq >"$neq" && + git add "$neq" && + git commit -m "neq" && + git svn dcommit +' + +# See the comment on the above test for setting of LC_ALL. +test_expect_success !MINGW,!UTF8_NFD_TO_NFC 'svn.pathnameencoding=cp932 rename on dcommit' ' + LC_ALL=$a_utf8_locale && + export LC_ALL && + inf=$(printf "\201\207") && + git config svn.pathnameencoding cp932 && + echo inf >"$inf" && + git add "$inf" && + git commit -m "inf" && + git svn dcommit && + git mv "$inf" inf && + git commit -m "inf rename" && + git svn dcommit +' stop_httpd diff --git a/t/t9117-git-svn-init-clone.sh b/t/t9117-git-svn-init-clone.sh index a66f43c6b1..044f65e916 100755 --- a/t/t9117-git-svn-init-clone.sh +++ b/t/t9117-git-svn-init-clone.sh @@ -55,7 +55,7 @@ test_expect_success 'clone to target directory with --stdlayout' ' test_expect_success 'init without -s/-T/-b/-t does not warn' ' test ! -d trunk && git svn init "$svnrepo"/project/trunk trunk 2>warning && - test_must_fail grep -q prefix warning && + ! grep -q prefix warning && rm -rf trunk && rm -f warning ' @@ -63,7 +63,7 @@ test_expect_success 'init without -s/-T/-b/-t does not warn' ' test_expect_success 'clone without -s/-T/-b/-t does not warn' ' test ! -d trunk && git svn clone "$svnrepo"/project/trunk 2>warning && - test_must_fail grep -q prefix warning && + ! grep -q prefix warning && rm -rf trunk && rm -f warning ' @@ -86,7 +86,7 @@ EOF test_expect_success 'init with -s/-T/-b/-t assumes --prefix=origin/' ' test ! -d project && git svn init -s "$svnrepo"/project project 2>warning && - test_must_fail grep -q prefix warning && + ! grep -q prefix warning && test_svn_configured_prefix "origin/" && rm -rf project && rm -f warning @@ -95,7 +95,7 @@ test_expect_success 'init with -s/-T/-b/-t assumes --prefix=origin/' ' test_expect_success 'clone with -s/-T/-b/-t assumes --prefix=origin/' ' test ! -d project && git svn clone -s "$svnrepo"/project 2>warning && - test_must_fail grep -q prefix warning && + ! grep -q prefix warning && test_svn_configured_prefix "origin/" && rm -rf project && rm -f warning @@ -104,7 +104,7 @@ test_expect_success 'clone with -s/-T/-b/-t assumes --prefix=origin/' ' test_expect_success 'init with -s/-T/-b/-t and --prefix "" still works' ' test ! -d project && git svn init -s "$svnrepo"/project project --prefix "" 2>warning && - test_must_fail grep -q prefix warning && + ! grep -q prefix warning && test_svn_configured_prefix "" && rm -rf project && rm -f warning @@ -113,10 +113,16 @@ test_expect_success 'init with -s/-T/-b/-t and --prefix "" still works' ' test_expect_success 'clone with -s/-T/-b/-t and --prefix "" still works' ' test ! -d project && git svn clone -s "$svnrepo"/project --prefix "" 2>warning && - test_must_fail grep -q prefix warning && + ! grep -q prefix warning && test_svn_configured_prefix "" && rm -rf project && rm -f warning ' +test_expect_success 'init with -T as a full url works' ' + test ! -d project && + git svn init -T "$svnrepo"/project/trunk project && + rm -rf project + ' + test_done diff --git a/t/t9118-git-svn-funky-branch-names.sh b/t/t9118-git-svn-funky-branch-names.sh index ed4d1369cc..41a026637f 100755 --- a/t/t9118-git-svn-funky-branch-names.sh +++ b/t/t9118-git-svn-funky-branch-names.sh @@ -23,19 +23,22 @@ test_expect_success 'setup svnrepo' ' "$svnrepo/pr ject/branches/$scary_uri" && svn_cmd cp -m "leading dot" "$svnrepo/pr ject/trunk" \ "$svnrepo/pr ject/branches/.leading_dot" && - svn_cmd cp -m "trailing dot" "$svnrepo/pr ject/trunk" \ - "$svnrepo/pr ject/branches/trailing_dot." && + if test_have_prereq !MINGW + then + svn_cmd cp -m "trailing dot" "$svnrepo/pr ject/trunk" \ + "$svnrepo/pr ject/branches/trailing_dot." + fi && svn_cmd cp -m "trailing .lock" "$svnrepo/pr ject/trunk" \ "$svnrepo/pr ject/branches/trailing_dotlock.lock" && svn_cmd cp -m "reflog" "$svnrepo/pr ject/trunk" \ "$svnrepo/pr ject/branches/not-a@{0}reflog@" && - start_httpd + maybe_start_httpd ' # SVN 1.7 will truncate "not-a%40{0]" to just "not-a". # Look at what SVN wound up naming the branch and use that. # Be sure to escape the @ if it shows up. -non_reflog=`svn_cmd ls "$svnrepo/pr ject/branches" | grep not-a | sed 's/\///' | sed 's/@/%40/'` +non_reflog=$(svn_cmd ls "$svnrepo/pr ject/branches" | grep not-a | sed 's/\///' | sed 's/@/%40/') test_expect_success 'test clone with funky branch names' ' git svn clone -s "$svnrepo/pr ject" project && @@ -45,7 +48,10 @@ test_expect_success 'test clone with funky branch names' ' git rev-parse "refs/remotes/origin/more%20fun%20plugin!" && git rev-parse "refs/remotes/origin/$scary_ref" && git rev-parse "refs/remotes/origin/%2Eleading_dot" && - git rev-parse "refs/remotes/origin/trailing_dot%2E" && + if test_have_prereq !MINGW + then + git rev-parse "refs/remotes/origin/trailing_dot%2E" + fi && git rev-parse "refs/remotes/origin/trailing_dotlock%2Elock" && git rev-parse "refs/remotes/origin/$non_reflog" ) diff --git a/t/t9119-git-svn-info.sh b/t/t9119-git-svn-info.sh index f16f3234a1..88241baee3 100755 --- a/t/t9119-git-svn-info.sh +++ b/t/t9119-git-svn-info.sh @@ -8,7 +8,7 @@ test_description='git svn info' # Tested with: svn, version 1.4.4 (r25188) # Tested with: svn, version 1.6.[12345689] -v=`svn_cmd --version | sed -n -e 's/^svn, version \(1\.[0-9]*\.[0-9]*\).*$/\1/p'` +v=$(svn_cmd --version | sed -n -e 's/^svn, version \(1\.[0-9]*\.[0-9]*\).*$/\1/p') case $v in 1.[456].*) ;; diff --git a/t/t9120-git-svn-clone-with-percent-escapes.sh b/t/t9120-git-svn-clone-with-percent-escapes.sh index 1c84ce1023..b28a1741e3 100755 --- a/t/t9120-git-svn-clone-with-percent-escapes.sh +++ b/t/t9120-git-svn-clone-with-percent-escapes.sh @@ -15,14 +15,14 @@ test_expect_success 'setup svnrepo' ' svn_cmd cp -m "tag" "$svnrepo/pr ject/trunk" \ "$svnrepo/pr ject/tags/v1" && rm -rf project && - start_httpd + maybe_start_httpd ' test_expect_success 'test clone with percent escapes' ' git svn clone "$svnrepo/pr%20ject" clone && ( cd clone && - git rev-parse refs/${remotes_git_svn} + git rev-parse refs/remotes/git-svn ) ' @@ -42,7 +42,7 @@ test_expect_success 'test clone trunk with percent escapes and minimize-url' ' git svn clone --minimize-url "$svnrepo/pr%20ject/trunk" minimize && ( cd minimize && - git rev-parse refs/${remotes_git_svn} + git rev-parse refs/remotes/git-svn ) ' @@ -50,7 +50,7 @@ test_expect_success 'test clone trunk with percent escapes' ' git svn clone "$svnrepo/pr%20ject/trunk" trunk && ( cd trunk && - git rev-parse refs/${remotes_git_svn} + git rev-parse refs/remotes/git-svn ) ' diff --git a/t/t9123-git-svn-rebuild-with-rewriteroot.sh b/t/t9123-git-svn-rebuild-with-rewriteroot.sh index fd8184787f..ead404589e 100755 --- a/t/t9123-git-svn-rebuild-with-rewriteroot.sh +++ b/t/t9123-git-svn-rebuild-with-rewriteroot.sh @@ -17,7 +17,7 @@ rm -rf import test_expect_success 'init, fetch and checkout repository' ' git svn init --rewrite-root=http://invalid.invalid/ "$svnrepo" && git svn fetch && - git checkout -b mybranch ${remotes_git_svn} + git checkout -b mybranch remotes/git-svn ' test_expect_success 'remove rev_map' ' diff --git a/t/t9124-git-svn-dcommit-auto-props.sh b/t/t9124-git-svn-dcommit-auto-props.sh index aa841e1299..9f7231d5b7 100755 --- a/t/t9124-git-svn-dcommit-auto-props.sh +++ b/t/t9124-git-svn-dcommit-auto-props.sh @@ -34,8 +34,7 @@ test_expect_success 'enable auto-props config' ' ' test_expect_success 'add files matching auto-props' ' - echo "#!$SHELL_PATH" >exec1.sh && - chmod +x exec1.sh && + write_script exec1.sh </dev/null && echo "hello" >hello.txt && echo bar >bar && git add exec1.sh hello.txt bar && @@ -48,8 +47,7 @@ test_expect_success 'disable auto-props config' ' ' test_expect_success 'add files matching disabled auto-props' ' - echo "#$SHELL_PATH" >exec2.sh && - chmod +x exec2.sh && + write_script exec2.sh </dev/null && echo "world" >world.txt && echo zot >zot && git add exec2.sh world.txt zot && @@ -65,7 +63,10 @@ test_expect_success 'check resulting svn repository' ' cd svnrepo && # Check properties from first commit. - test "x$(svn_cmd propget svn:executable exec1.sh)" = "x*" && + if test_have_prereq POSIXPERM + then + test "x$(svn_cmd propget svn:executable exec1.sh)" = "x*" + fi && test "x$(svn_cmd propget svn:mime-type exec1.sh)" = \ "xapplication/x-shellscript" && test "x$(svn_cmd propget svn:mime-type hello.txt)" = "xtext/plain" && @@ -73,7 +74,10 @@ test_expect_success 'check resulting svn repository' ' test "x$(svn_cmd propget svn:mime-type bar)" = "x" && # Check properties from second commit. - test "x$(svn_cmd propget svn:executable exec2.sh)" = "x*" && + if test_have_prereq POSIXPERM + then + test "x$(svn_cmd propget svn:executable exec2.sh)" = "x*" + fi && test "x$(svn_cmd propget svn:mime-type exec2.sh)" = "x" && test "x$(svn_cmd propget svn:mime-type world.txt)" = "x" && test "x$(svn_cmd propget svn:eol-style world.txt)" = "x" && diff --git a/t/t9129-git-svn-i18n-commitencoding.sh b/t/t9129-git-svn-i18n-commitencoding.sh index 8cfdfe790f..8dbd6476fa 100755 --- a/t/t9129-git-svn-i18n-commitencoding.sh +++ b/t/t9129-git-svn-i18n-commitencoding.sh @@ -7,29 +7,19 @@ test_description='git svn honors i18n.commitEncoding in config' . ./lib-git-svn.sh compare_git_head_with () { - nr=`wc -l < "$1"` + nr=$(wc -l < "$1") a=7 b=$(($a + $nr - 1)) git cat-file commit HEAD | sed -ne "$a,${b}p" >current && test_cmp current "$1" } -a_utf8_locale=$(locale -a | sed -n '/\.[uU][tT][fF]-*8$/{ - p - q -}') - -if test -n "$a_utf8_locale" -then - test_set_prereq UTF8 -else - say "# UTF-8 locale not available, some tests are skipped" -fi +prepare_a_utf8_locale compare_svn_head_with () { # extract just the log message and strip out committer info. # don't use --limit here since svn 1.1.x doesn't have it, - LC_ALL="$a_utf8_locale" svn log `git svn info --url` | perl -w -e ' + LC_ALL="$a_utf8_locale" svn log $(git svn info --url) | perl -w -e ' use bytes; $/ = ("-"x72) . "\n"; my @x = <STDIN>; diff --git a/t/t9130-git-svn-authors-file.sh b/t/t9130-git-svn-authors-file.sh index c44de267a1..41264818cc 100755 --- a/t/t9130-git-svn-authors-file.sh +++ b/t/t9130-git-svn-authors-file.sh @@ -26,7 +26,7 @@ test_expect_success 'start import with incomplete authors file' ' test_expect_success 'imported 2 revisions successfully' ' ( cd x - test "`git rev-list refs/remotes/git-svn | wc -l`" -eq 2 && + test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 2 && git rev-list -1 --pretty=raw refs/remotes/git-svn | \ grep "^author BBBBBBB BBBBBBB <bb@example\.com> " && git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ @@ -43,7 +43,7 @@ test_expect_success 'continues to import once authors have been added' ' ( cd x git svn fetch --authors-file=../svn-authors && - test "`git rev-list refs/remotes/git-svn | wc -l`" -eq 4 && + test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 4 && git rev-list -1 --pretty=raw refs/remotes/git-svn | \ grep "^author DDDDDDD DDDDDDD <dd@example\.com> " && git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ @@ -73,8 +73,8 @@ tmp_config_get () { test_expect_success 'failure happened without negative side effects' ' ( cd aa-work && - test 6 -eq "`tmp_config_get svn-remote.svn.branches-maxRev`" && - test 6 -eq "`tmp_config_get svn-remote.svn.tags-maxRev`" + test 6 -eq "$(tmp_config_get svn-remote.svn.branches-maxRev)" && + test 6 -eq "$(tmp_config_get svn-remote.svn.tags-maxRev)" ) ' @@ -86,12 +86,12 @@ test_expect_success 'fetch continues after authors-file is fixed' ' ( cd aa-work && git svn fetch --authors-file=../svn-authors && - test 8 -eq "`tmp_config_get svn-remote.svn.branches-maxRev`" && - test 8 -eq "`tmp_config_get svn-remote.svn.tags-maxRev`" + test 8 -eq "$(tmp_config_get svn-remote.svn.branches-maxRev)" && + test 8 -eq "$(tmp_config_get svn-remote.svn.tags-maxRev)" ) ' -test_expect_success 'fresh clone with svn.authors-file in config' ' +test_expect_success !MINGW 'fresh clone with svn.authors-file in config' ' ( rm -r "$GIT_DIR" && test x = x"$(git config svn.authorsfile)" && diff --git a/t/t9132-git-svn-broken-symlink.sh b/t/t9132-git-svn-broken-symlink.sh index 6c4c90b036..aeceffaf7b 100755 --- a/t/t9132-git-svn-broken-symlink.sh +++ b/t/t9132-git-svn-broken-symlink.sh @@ -87,7 +87,7 @@ test_expect_success 'clone using git svn' 'git svn clone -r1 "$svnrepo" x' test_expect_success SYMLINKS '"bar" is a symlink that points to "asdf"' ' test -L x/bar && - (cd x && test xasdf = x"`git cat-file blob HEAD:bar`") + (cd x && test xasdf = x"$(git cat-file blob HEAD:bar)") ' test_expect_success 'get "bar" => symlink fix from svn' ' @@ -96,7 +96,7 @@ test_expect_success 'get "bar" => symlink fix from svn' ' test_expect_success SYMLINKS '"bar" remains a proper symlink' ' test -L x/bar && - (cd x && test xdoink = x"`git cat-file blob HEAD:bar`") + (cd x && test xdoink = x"$(git cat-file blob HEAD:bar)") ' test_done diff --git a/t/t9137-git-svn-dcommit-clobber-series.sh b/t/t9137-git-svn-dcommit-clobber-series.sh index d60da63f7a..5fa07a369f 100755 --- a/t/t9137-git-svn-dcommit-clobber-series.sh +++ b/t/t9137-git-svn-dcommit-clobber-series.sh @@ -16,15 +16,15 @@ test_expect_success 'initialize repo' ' ' test_expect_success '(supposedly) non-conflicting change from SVN' ' - test x"`sed -n -e 58p < file`" = x58 && - test x"`sed -n -e 61p < file`" = x61 && + test x"$(sed -n -e 58p < file)" = x58 && + test x"$(sed -n -e 61p < file)" = x61 && svn_cmd co "$svnrepo" tmp && (cd tmp && perl -i.bak -p -e "s/^58$/5588/" file && perl -i.bak -p -e "s/^61$/6611/" file && poke file && - test x"`sed -n -e 58p < file`" = x5588 && - test x"`sed -n -e 61p < file`" = x6611 && + test x"$(sed -n -e 58p < file)" = x5588 && + test x"$(sed -n -e 61p < file)" = x6611 && svn_cmd commit -m "58 => 5588, 61 => 6611" ) ' @@ -38,20 +38,20 @@ test_expect_success 'some unrelated changes to git' " " test_expect_success 'change file but in unrelated area' " - test x\"\`sed -n -e 4p < file\`\" = x4 && - test x\"\`sed -n -e 7p < file\`\" = x7 && + test x\"\$(sed -n -e 4p < file)\" = x4 && + test x\"\$(sed -n -e 7p < file)\" = x7 && perl -i.bak -p -e 's/^4\$/4444/' file && perl -i.bak -p -e 's/^7\$/7777/' file && - test x\"\`sed -n -e 4p < file\`\" = x4444 && - test x\"\`sed -n -e 7p < file\`\" = x7777 && + test x\"\$(sed -n -e 4p < file)\" = x4444 && + test x\"\$(sed -n -e 7p < file)\" = x7777 && git commit -m '4 => 4444, 7 => 7777' file && git svn dcommit && svn_cmd up tmp && cd tmp && - test x\"\`sed -n -e 4p < file\`\" = x4444 && - test x\"\`sed -n -e 7p < file\`\" = x7777 && - test x\"\`sed -n -e 58p < file\`\" = x5588 && - test x\"\`sed -n -e 61p < file\`\" = x6611 + test x\"\$(sed -n -e 4p < file)\" = x4444 && + test x\"\$(sed -n -e 7p < file)\" = x7777 && + test x\"\$(sed -n -e 58p < file)\" = x5588 && + test x\"\$(sed -n -e 61p < file)\" = x6611 " test_expect_success 'attempt to dcommit with a dirty index' ' diff --git a/t/t9138-git-svn-authors-prog.sh b/t/t9138-git-svn-authors-prog.sh index 2937f4c265..7d7e9d46bc 100755 --- a/t/t9138-git-svn-authors-prog.sh +++ b/t/t9138-git-svn-authors-prog.sh @@ -37,7 +37,7 @@ test_expect_success 'import authors with prog and file' ' test_expect_success 'imported 6 revisions successfully' ' ( cd x - test "`git rev-list refs/remotes/git-svn | wc -l`" -eq 6 + test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 6 ) ' diff --git a/t/t9142-git-svn-shallow-clone.sh b/t/t9142-git-svn-shallow-clone.sh index e21ee5f663..9ee23be640 100755 --- a/t/t9142-git-svn-shallow-clone.sh +++ b/t/t9142-git-svn-shallow-clone.sh @@ -18,7 +18,7 @@ test_expect_success 'setup test repository' ' svn_cmd add foo && svn_cmd commit -m "add foo" ) && - start_httpd + maybe_start_httpd ' test_expect_success 'clone trunk with "-r HEAD"' ' diff --git a/t/t9145-git-svn-master-branch.sh b/t/t9145-git-svn-master-branch.sh index 6559137493..3bbf341f6a 100755 --- a/t/t9145-git-svn-master-branch.sh +++ b/t/t9145-git-svn-master-branch.sh @@ -17,8 +17,8 @@ test_expect_success 'git svn clone --stdlayout sets up trunk as master' ' git svn clone -s "$svnrepo" g && ( cd g && - test x`git rev-parse --verify refs/remotes/origin/trunk^0` = \ - x`git rev-parse --verify refs/heads/master^0` + test x$(git rev-parse --verify refs/remotes/origin/trunk^0) = \ + x$(git rev-parse --verify refs/heads/master^0) ) ' diff --git a/t/t9150-svk-mergetickets.sh b/t/t9150-svk-mergetickets.sh index 24c2421bfc..1bb676bede 100755 --- a/t/t9150-svk-mergetickets.sh +++ b/t/t9150-svk-mergetickets.sh @@ -19,7 +19,7 @@ test_expect_success 'load svk depot' " uuid=b48289b2-9c08-4d72-af37-0358a40b9c15 test_expect_success 'svk merges were represented coming in' " - [ `git cat-file commit HEAD | grep parent | wc -l` -eq 2 ] + [ $(git cat-file commit HEAD | grep parent | wc -l) -eq 2 ] " test_done diff --git a/t/t9153-git-svn-rewrite-uuid.sh b/t/t9153-git-svn-rewrite-uuid.sh index 88a2cfa233..372ef15685 100755 --- a/t/t9153-git-svn-rewrite-uuid.sh +++ b/t/t9153-git-svn-rewrite-uuid.sh @@ -17,9 +17,9 @@ test_expect_success 'load svn repo' " test_expect_success 'verify uuid' " git cat-file commit refs/remotes/git-svn~0 | \ - grep '^${git_svn_id}: .*@2 $uuid$' && + grep '^git-svn-id: .*@2 $uuid$' && git cat-file commit refs/remotes/git-svn~1 | \ - grep '^${git_svn_id}: .*@1 $uuid$' + grep '^git-svn-id: .*@1 $uuid$' " test_done diff --git a/t/t9158-git-svn-mergeinfo.sh b/t/t9158-git-svn-mergeinfo.sh index 13f78f2682..a875b45102 100755 --- a/t/t9158-git-svn-mergeinfo.sh +++ b/t/t9158-git-svn-mergeinfo.sh @@ -7,8 +7,6 @@ test_description='git svn mergeinfo propagation' . ./lib-git-svn.sh -say 'define NO_SVN_TESTS to skip git svn tests' - test_expect_success 'initialize source svn repo' ' svn_cmd mkdir -m x "$svnrepo"/trunk && svn_cmd co "$svnrepo"/trunk "$SVN_TREE" && diff --git a/t/t9160-git-svn-preserve-empty-dirs.sh b/t/t9160-git-svn-preserve-empty-dirs.sh index b4a4434604..0ede3cfedb 100755 --- a/t/t9160-git-svn-preserve-empty-dirs.sh +++ b/t/t9160-git-svn-preserve-empty-dirs.sh @@ -11,7 +11,6 @@ local Git repository with placeholder files.' . ./lib-git-svn.sh -say 'define NO_SVN_TESTS to skip git svn tests' GIT_REPO=git-svn-repo test_expect_success 'initialize source svn repo containing empty dirs' ' diff --git a/t/t9168-git-svn-partially-globbed-names.sh b/t/t9168-git-svn-partially-globbed-names.sh new file mode 100755 index 0000000000..8b22f2272c --- /dev/null +++ b/t/t9168-git-svn-partially-globbed-names.sh @@ -0,0 +1,223 @@ +#!/bin/sh +test_description='git svn globbing refspecs with prefixed globs' +. ./lib-git-svn.sh + +test_expect_success 'prepare test refspec prefixed globbing' ' + cat >expect.end <<EOF +the end +hi +start a new branch +initial +EOF + ' + +test_expect_success 'test refspec prefixed globbing' ' + mkdir -p trunk/src/a trunk/src/b trunk/doc && + echo "hello world" >trunk/src/a/readme && + echo "goodbye world" >trunk/src/b/readme && + svn_cmd import -m "initial" trunk "$svnrepo"/trunk && + svn_cmd co "$svnrepo" tmp && + ( + cd tmp && + mkdir branches tags && + svn_cmd add branches tags && + svn_cmd cp trunk branches/b_start && + svn_cmd commit -m "start a new branch" && + svn_cmd up && + echo "hi" >>branches/b_start/src/b/readme && + poke branches/b_start/src/b/readme && + echo "hey" >>branches/b_start/src/a/readme && + poke branches/b_start/src/a/readme && + svn_cmd commit -m "hi" && + svn_cmd up && + svn_cmd cp branches/b_start tags/t_end && + echo "bye" >>tags/t_end/src/b/readme && + poke tags/t_end/src/b/readme && + echo "aye" >>tags/t_end/src/a/readme && + poke tags/t_end/src/a/readme && + svn_cmd commit -m "the end" && + echo "byebye" >>tags/t_end/src/b/readme && + poke tags/t_end/src/b/readme && + svn_cmd commit -m "nothing to see here" + ) && + git config --add svn-remote.svn.url "$svnrepo" && + git config --add svn-remote.svn.fetch \ + "trunk/src/a:refs/remotes/trunk" && + git config --add svn-remote.svn.branches \ + "branches/b_*/src/a:refs/remotes/branches/b_*" && + git config --add svn-remote.svn.tags\ + "tags/t_*/src/a:refs/remotes/tags/t_*" && + git svn multi-fetch && + git log --pretty=oneline refs/remotes/tags/t_end | \ + sed -e "s/^.\{41\}//" >output.end && + test_cmp expect.end output.end && + test "$(git rev-parse refs/remotes/tags/t_end~1)" = \ + "$(git rev-parse refs/remotes/branches/b_start)" && + test "$(git rev-parse refs/remotes/branches/b_start~2)" = \ + "$(git rev-parse refs/remotes/trunk)" && + test_must_fail git rev-parse refs/remotes/tags/t_end@3 + ' + +test_expect_success 'prepare test left-hand-side only prefixed globbing' ' + echo try to try >expect.two && + echo nothing to see here >>expect.two && + cat expect.end >>expect.two + ' + +test_expect_success 'test left-hand-side only prefixed globbing' ' + git config --add svn-remote.two.url "$svnrepo" && + git config --add svn-remote.two.fetch trunk:refs/remotes/two/trunk && + git config --add svn-remote.two.branches \ + "branches/b_*:refs/remotes/two/branches/*" && + git config --add svn-remote.two.tags \ + "tags/t_*:refs/remotes/two/tags/*" && + ( + cd tmp && + echo "try try" >>tags/t_end/src/b/readme && + poke tags/t_end/src/b/readme && + svn_cmd commit -m "try to try" + ) && + git svn fetch two && + test $(git rev-list refs/remotes/two/tags/t_end | wc -l) -eq 6 && + test $(git rev-list refs/remotes/two/branches/b_start | wc -l) -eq 3 && + test $(git rev-parse refs/remotes/two/branches/b_start~2) = \ + $(git rev-parse refs/remotes/two/trunk) && + test $(git rev-parse refs/remotes/two/tags/t_end~3) = \ + $(git rev-parse refs/remotes/two/branches/b_start) && + git log --pretty=oneline refs/remotes/two/tags/t_end | \ + sed -e "s/^.\{41\}//" >output.two && + test_cmp expect.two output.two + ' + +test_expect_success 'prepare test prefixed globs match just prefix' ' + cat >expect.three <<EOF +Tag commit to t_ +Branch commit to b_ +initial +EOF + ' + +test_expect_success 'test prefixed globs match just prefix' ' + git config --add svn-remote.three.url "$svnrepo" && + git config --add svn-remote.three.fetch \ + trunk:refs/remotes/three/trunk && + git config --add svn-remote.three.branches \ + "branches/b_*:refs/remotes/three/branches/*" && + git config --add svn-remote.three.tags \ + "tags/t_*:refs/remotes/three/tags/*" && + ( + cd tmp && + svn_cmd cp trunk branches/b_ && + echo "Branch commit to b_" >>branches/b_/src/a/readme && + poke branches/b_/src/a/readme && + svn_cmd commit -m "Branch commit to b_" && + svn_cmd up && svn_cmd cp branches/b_ tags/t_ && + echo "Tag commit to t_" >>tags/t_/src/a/readme && + poke tags/t_/src/a/readme && + svn_cmd commit -m "Tag commit to t_" && + svn_cmd up + ) && + git svn fetch three && + test $(git rev-list refs/remotes/three/branches/b_ | wc -l) -eq 2 && + test $(git rev-list refs/remotes/three/tags/t_ | wc -l) -eq 3 && + test $(git rev-parse refs/remotes/three/branches/b_~1) = \ + $(git rev-parse refs/remotes/three/trunk) && + test $(git rev-parse refs/remotes/three/tags/t_~1) = \ + $(git rev-parse refs/remotes/three/branches/b_) && + git log --pretty=oneline refs/remotes/three/tags/t_ | \ + sed -e "s/^.\{41\}//" >output.three && + test_cmp expect.three output.three + ' + +test_expect_success 'prepare test disallow prefixed multi-globs' " +cat >expect.four <<EOF +Only one set of wildcards (e.g. '*' or '*/*/*') is supported: branches/b_*/t/* + +EOF + " + +test_expect_success 'test disallow prefixed multi-globs' ' + git config --add svn-remote.four.url "$svnrepo" && + git config --add svn-remote.four.fetch \ + trunk:refs/remotes/four/trunk && + git config --add svn-remote.four.branches \ + "branches/b_*/t/*:refs/remotes/four/branches/*" && + git config --add svn-remote.four.tags \ + "tags/t_*/*:refs/remotes/four/tags/*" && + ( + cd tmp && + echo "try try" >>tags/t_end/src/b/readme && + poke tags/t_end/src/b/readme && + svn_cmd commit -m "try to try" + ) && + test_must_fail git svn fetch four 2>stderr.four && + test_cmp expect.four stderr.four && + git config --unset svn-remote.four.branches && + git config --unset svn-remote.four.tags + ' + +test_expect_success 'prepare test globbing in the middle of the word' ' + cat >expect.five <<EOF +Tag commit to fghij +Branch commit to abcde +initial +EOF + ' + +test_expect_success 'test globbing in the middle of the word' ' + git config --add svn-remote.five.url "$svnrepo" && + git config --add svn-remote.five.fetch \ + trunk:refs/remotes/five/trunk && + git config --add svn-remote.five.branches \ + "branches/a*e:refs/remotes/five/branches/*" && + git config --add svn-remote.five.tags \ + "tags/f*j:refs/remotes/five/tags/*" && + ( + cd tmp && + svn_cmd cp trunk branches/abcde && + echo "Branch commit to abcde" >>branches/abcde/src/a/readme && + poke branches/b_/src/a/readme && + svn_cmd commit -m "Branch commit to abcde" && + svn_cmd up && + svn_cmd cp branches/abcde tags/fghij && + echo "Tag commit to fghij" >>tags/fghij/src/a/readme && + poke tags/fghij/src/a/readme && + svn_cmd commit -m "Tag commit to fghij" && + svn_cmd up + ) && + git svn fetch five && + test $(git rev-list refs/remotes/five/branches/abcde | wc -l) -eq 2 && + test $(git rev-list refs/remotes/five/tags/fghij | wc -l) -eq 3 && + test $(git rev-parse refs/remotes/five/branches/abcde~1) = \ + $(git rev-parse refs/remotes/five/trunk) && + test $(git rev-parse refs/remotes/five/tags/fghij~1) = \ + $(git rev-parse refs/remotes/five/branches/abcde) && + git log --pretty=oneline refs/remotes/five/tags/fghij | \ + sed -e "s/^.\{41\}//" >output.five && + test_cmp expect.five output.five + ' + +test_expect_success 'prepare test disallow multiple asterisks in one word' " + echo \"Only one '*' is allowed in a pattern: 'a*c*e'\" >expect.six && + echo \"\" >>expect.six + " + +test_expect_success 'test disallow multiple asterisks in one word' ' + git config --add svn-remote.six.url "$svnrepo" && + git config --add svn-remote.six.fetch \ + trunk:refs/remotes/six/trunk && + git config --add svn-remote.six.branches \ + "branches/a*c*e:refs/remotes/six/branches/*" && + git config --add svn-remote.six.tags \ + "tags/f*h*j:refs/remotes/six/tags/*" && + ( + cd tmp && + echo "try try" >>tags/fghij/src/b/readme && + poke tags/fghij/src/b/readme && + svn_cmd commit -m "try to try" + ) && + test_must_fail git svn fetch six 2>stderr.six && + test_cmp expect.six stderr.six + ' + +test_done diff --git a/t/t9200-git-cvsexportcommit.sh b/t/t9200-git-cvsexportcommit.sh index 812c9cd462..bb879a527d 100755 --- a/t/t9200-git-cvsexportcommit.sh +++ b/t/t9200-git-cvsexportcommit.sh @@ -35,7 +35,7 @@ exit 1 check_entries () { # $1 == directory, $2 == expected - grep '^/' "$1/CVS/Entries" | sort | cut -d/ -f2,3,5 >actual + sed -ne '/^\//p' "$1/CVS/Entries" | sort | cut -d/ -f2,3,5 >actual if test -z "$2" then >expected @@ -197,7 +197,7 @@ if p="Ã…/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/Ã¥/ä/ö" && then # This test contains UTF-8 characters -test_expect_success \ +test_expect_success !MINGW \ 'File with non-ascii file name' \ 'mkdir -p Ã…/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/Ã¥/ä/ö && echo Foo >Ã…/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/Ã¥/ä/ö/gÃ¥rdetsÃ¥gÃ¥rdet.txt && diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index aac126fd57..2e0ba3ebd8 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -7,23 +7,6 @@ test_description='test git fast-import utility' . ./test-lib.sh . "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash -# Print $1 bytes from stdin to stdout. -# -# This could be written as "head -c $1", but IRIX "head" does not -# support the -c option. -head_c () { - perl -e ' - my $len = $ARGV[1]; - while ($len > 0) { - my $s; - my $nread = sysread(STDIN, $s, $len); - die "cannot read: $!" unless defined($nread); - print $s; - $len -= $nread; - } - ' - "$1" -} - verify_packs () { for p in .git/objects/pack/*.pack do @@ -47,1077 +30,1080 @@ file5_data='an inline file. file6_data='#!/bin/sh echo "$@"' ->empty - ### ### series A ### -test_tick - test_expect_success 'empty stream succeeds' ' + git config fastimport.unpackLimit 0 && git fast-import </dev/null ' -cat >input <<INPUT_END -blob -mark :2 -data <<EOF -$file2_data -EOF - -blob -mark :3 -data <<END -$file3_data -END - -blob -mark :4 -data $file4_len -$file4_data -commit refs/heads/master -mark :5 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -initial -COMMIT - -M 644 :2 file2 -M 644 :3 file3 -M 755 :4 file4 - -tag series-A -from :5 -data <<EOF -An annotated tag without a tagger -EOF - -tag series-A-blob -from :3 -data <<EOF -An annotated tag that annotates a blob. -EOF - -INPUT_END -test_expect_success \ - 'A: create pack from stdin' \ - 'git fast-import --export-marks=marks.out <input && - git whatchanged master' +test_expect_success 'truncated stream complains' ' + echo "tag foo" | test_must_fail git fast-import +' + +test_expect_success 'A: create pack from stdin' ' + test_tick && + cat >input <<-INPUT_END && + blob + mark :2 + data <<EOF + $file2_data + EOF + + blob + mark :3 + data <<END + $file3_data + END + + blob + mark :4 + data $file4_len + $file4_data + commit refs/heads/master + mark :5 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + initial + COMMIT + + M 644 :2 file2 + M 644 :3 file3 + M 755 :4 file4 + + tag series-A + from :5 + data <<EOF + An annotated tag without a tagger + EOF + + tag series-A-blob + from :3 + data <<EOF + An annotated tag that annotates a blob. + EOF + + INPUT_END + git fast-import --export-marks=marks.out <input && + git whatchanged master +' test_expect_success 'A: verify pack' ' verify_packs ' -cat >expect <<EOF -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE - -initial -EOF -test_expect_success \ - 'A: verify commit' \ - 'git cat-file commit master | sed 1d >actual && - test_cmp expect actual' - -cat >expect <<EOF -100644 blob file2 -100644 blob file3 -100755 blob file4 -EOF -test_expect_success \ - 'A: verify tree' \ - 'git cat-file -p master^{tree} | sed "s/ [0-9a-f]* / /" >actual && - test_cmp expect actual' - -echo "$file2_data" >expect -test_expect_success \ - 'A: verify file2' \ - 'git cat-file blob master:file2 >actual && test_cmp expect actual' - -echo "$file3_data" >expect -test_expect_success \ - 'A: verify file3' \ - 'git cat-file blob master:file3 >actual && test_cmp expect actual' - -printf "$file4_data" >expect -test_expect_success \ - 'A: verify file4' \ - 'git cat-file blob master:file4 >actual && test_cmp expect actual' - -cat >expect <<EOF -object $(git rev-parse refs/heads/master) -type commit -tag series-A - -An annotated tag without a tagger -EOF +test_expect_success 'A: verify commit' ' + cat >expect <<-EOF && + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + + initial + EOF + git cat-file commit master | sed 1d >actual && + test_cmp expect actual +' + +test_expect_success 'A: verify tree' ' + cat >expect <<-EOF && + 100644 blob file2 + 100644 blob file3 + 100755 blob file4 + EOF + git cat-file -p master^{tree} | sed "s/ [0-9a-f]* / /" >actual && + test_cmp expect actual +' + +test_expect_success 'A: verify file2' ' + echo "$file2_data" >expect && + git cat-file blob master:file2 >actual && + test_cmp expect actual +' + +test_expect_success 'A: verify file3' ' + echo "$file3_data" >expect && + git cat-file blob master:file3 >actual && + test_cmp expect actual +' + +test_expect_success 'A: verify file4' ' + printf "$file4_data" >expect && + git cat-file blob master:file4 >actual && + test_cmp expect actual +' + test_expect_success 'A: verify tag/series-A' ' + cat >expect <<-EOF && + object $(git rev-parse refs/heads/master) + type commit + tag series-A + + An annotated tag without a tagger + EOF git cat-file tag tags/series-A >actual && test_cmp expect actual ' -cat >expect <<EOF -object $(git rev-parse refs/heads/master:file3) -type blob -tag series-A-blob - -An annotated tag that annotates a blob. -EOF test_expect_success 'A: verify tag/series-A-blob' ' + cat >expect <<-EOF && + object $(git rev-parse refs/heads/master:file3) + type blob + tag series-A-blob + + An annotated tag that annotates a blob. + EOF git cat-file tag tags/series-A-blob >actual && test_cmp expect actual ' -cat >expect <<EOF -:2 `git rev-parse --verify master:file2` -:3 `git rev-parse --verify master:file3` -:4 `git rev-parse --verify master:file4` -:5 `git rev-parse --verify master^0` -EOF -test_expect_success \ - 'A: verify marks output' \ - 'test_cmp expect marks.out' +test_expect_success 'A: verify marks output' ' + cat >expect <<-EOF && + :2 $(git rev-parse --verify master:file2) + :3 $(git rev-parse --verify master:file3) + :4 $(git rev-parse --verify master:file4) + :5 $(git rev-parse --verify master^0) + EOF + test_cmp expect marks.out +' -test_expect_success \ - 'A: verify marks import' \ - 'git fast-import \ +test_expect_success 'A: verify marks import' ' + git fast-import \ --import-marks=marks.out \ --export-marks=marks.new \ </dev/null && - test_cmp expect marks.new' - -test_tick -new_blob=$(echo testing | git hash-object --stdin) -cat >input <<INPUT_END -tag series-A-blob-2 -from $(git rev-parse refs/heads/master:file3) -data <<EOF -Tag blob by sha1. -EOF - -blob -mark :6 -data <<EOF -testing -EOF - -commit refs/heads/new_blob -committer <> 0 +0000 -data 0 -M 644 :6 new_blob -#pretend we got sha1 from fast-import -ls "new_blob" - -tag series-A-blob-3 -from $new_blob -data <<EOF -Tag new_blob. -EOF -INPUT_END - -cat >expect <<EOF -object $(git rev-parse refs/heads/master:file3) -type blob -tag series-A-blob-2 - -Tag blob by sha1. -object $new_blob -type blob -tag series-A-blob-3 - -Tag new_blob. -EOF - -test_expect_success \ - 'A: tag blob by sha1' \ - 'git fast-import <input && + test_cmp expect marks.new +' + +test_expect_success 'A: tag blob by sha1' ' + test_tick && + new_blob=$(echo testing | git hash-object --stdin) && + cat >input <<-INPUT_END && + tag series-A-blob-2 + from $(git rev-parse refs/heads/master:file3) + data <<EOF + Tag blob by sha1. + EOF + + blob + mark :6 + data <<EOF + testing + EOF + + commit refs/heads/new_blob + committer <> 0 +0000 + data 0 + M 644 :6 new_blob + #pretend we got sha1 from fast-import + ls "new_blob" + + tag series-A-blob-3 + from $new_blob + data <<EOF + Tag new_blob. + EOF + INPUT_END + + cat >expect <<-EOF && + object $(git rev-parse refs/heads/master:file3) + type blob + tag series-A-blob-2 + + Tag blob by sha1. + object $new_blob + type blob + tag series-A-blob-3 + + Tag new_blob. + EOF + + git fast-import <input && git cat-file tag tags/series-A-blob-2 >actual && git cat-file tag tags/series-A-blob-3 >>actual && - test_cmp expect actual' + test_cmp expect actual +' -test_tick -cat >input <<INPUT_END -commit refs/heads/verify--import-marks -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -recreate from :5 -COMMIT +test_expect_success 'A: verify marks import does not crash' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/verify--import-marks + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + recreate from :5 + COMMIT -from :5 -M 755 :2 copy-of-file2 + from :5 + M 755 :2 copy-of-file2 -INPUT_END -test_expect_success \ - 'A: verify marks import does not crash' \ - 'git fast-import --import-marks=marks.out <input && - git whatchanged verify--import-marks' + INPUT_END + + git fast-import --import-marks=marks.out <input && + git whatchanged verify--import-marks +' test_expect_success 'A: verify pack' ' verify_packs ' -cat >expect <<EOF -:000000 100755 0000000000000000000000000000000000000000 7123f7f44e39be127c5eb701e5968176ee9d78b1 A copy-of-file2 -EOF -git diff-tree -M -r master verify--import-marks >actual -test_expect_success \ - 'A: verify diff' \ - 'compare_diff_raw expect actual && - test `git rev-parse --verify master:file2` \ - = `git rev-parse --verify verify--import-marks:copy-of-file2`' - -test_tick -mt=$(git hash-object --stdin < /dev/null) -: >input.blob -: >marks.exp -: >tree.exp - -cat >input.commit <<EOF -commit refs/heads/verify--dump-marks -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -test the sparse array dumping routines with exponentially growing marks -COMMIT -EOF - -i=0 -l=4 -m=6 -n=7 -while test "$i" -lt 27; do - cat >>input.blob <<EOF -blob -mark :$l -data 0 -blob -mark :$m -data 0 -blob -mark :$n -data 0 -EOF - echo "M 100644 :$l l$i" >>input.commit - echo "M 100644 :$m m$i" >>input.commit - echo "M 100644 :$n n$i" >>input.commit - - echo ":$l $mt" >>marks.exp - echo ":$m $mt" >>marks.exp - echo ":$n $mt" >>marks.exp - - printf "100644 blob $mt\tl$i\n" >>tree.exp - printf "100644 blob $mt\tm$i\n" >>tree.exp - printf "100644 blob $mt\tn$i\n" >>tree.exp - - l=$(($l + $l)) - m=$(($m + $m)) - n=$(($l + $n)) - - i=$((1 + $i)) -done - -sort tree.exp > tree.exp_s +test_expect_success 'A: verify diff' ' + cat >expect <<-EOF && + :000000 100755 0000000000000000000000000000000000000000 7123f7f44e39be127c5eb701e5968176ee9d78b1 A copy-of-file2 + EOF + git diff-tree -M -r master verify--import-marks >actual && + compare_diff_raw expect actual && + test $(git rev-parse --verify master:file2) \ + = $(git rev-parse --verify verify--import-marks:copy-of-file2) +' test_expect_success 'A: export marks with large values' ' + test_tick && + mt=$(git hash-object --stdin < /dev/null) && + >input.blob && + >marks.exp && + >tree.exp && + + cat >input.commit <<-EOF && + commit refs/heads/verify--dump-marks + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + test the sparse array dumping routines with exponentially growing marks + COMMIT + EOF + + i=0 l=4 m=6 n=7 && + while test "$i" -lt 27 + do + cat >>input.blob <<-EOF && + blob + mark :$l + data 0 + blob + mark :$m + data 0 + blob + mark :$n + data 0 + EOF + echo "M 100644 :$l l$i" >>input.commit && + echo "M 100644 :$m m$i" >>input.commit && + echo "M 100644 :$n n$i" >>input.commit && + + echo ":$l $mt" >>marks.exp && + echo ":$m $mt" >>marks.exp && + echo ":$n $mt" >>marks.exp && + + printf "100644 blob $mt\tl$i\n" >>tree.exp && + printf "100644 blob $mt\tm$i\n" >>tree.exp && + printf "100644 blob $mt\tn$i\n" >>tree.exp && + + l=$(($l + $l)) && + m=$(($m + $m)) && + n=$(($l + $n)) && + + i=$((1 + $i)) || return 1 + done && + + sort tree.exp > tree.exp_s && + cat input.blob input.commit | git fast-import --export-marks=marks.large && git ls-tree refs/heads/verify--dump-marks >tree.out && test_cmp tree.exp_s tree.out && - test_cmp marks.exp marks.large' + test_cmp marks.exp marks.large +' ### ### series B ### -test_tick -cat >input <<INPUT_END -commit refs/heads/branch -mark :1 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -corrupt -COMMIT +test_expect_success 'B: fail on invalid blob sha1' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/branch + mark :1 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + corrupt + COMMIT + + from refs/heads/master + M 755 0000000000000000000000000000000000000001 zero1 -from refs/heads/master -M 755 0000000000000000000000000000000000000001 zero1 + INPUT_END + + test_when_finished "rm -f .git/objects/pack_* .git/objects/index_*" && + test_must_fail git fast-import <input +' + +test_expect_success 'B: accept branch name "TEMP_TAG"' ' + cat >input <<-INPUT_END && + commit TEMP_TAG + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + tag base + COMMIT + + from refs/heads/master + + INPUT_END + + test_when_finished "rm -f .git/TEMP_TAG + git gc + git prune" && + git fast-import <input && + test -f .git/TEMP_TAG && + test $(git rev-parse master) = $(git rev-parse TEMP_TAG^) +' -INPUT_END -test_expect_success 'B: fail on invalid blob sha1' ' - test_must_fail git fast-import <input -' -rm -f .git/objects/pack_* .git/objects/index_* - -cat >input <<INPUT_END -commit TEMP_TAG -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -tag base -COMMIT - -from refs/heads/master - -INPUT_END -test_expect_success \ - 'B: accept branch name "TEMP_TAG"' \ - 'git fast-import <input && - test -f .git/TEMP_TAG && - test `git rev-parse master` = `git rev-parse TEMP_TAG^`' -rm -f .git/TEMP_TAG - -git gc 2>/dev/null >/dev/null -git prune 2>/dev/null >/dev/null - -cat >input <<INPUT_END -commit refs/heads/empty-committer-1 -committer <> $GIT_COMMITTER_DATE -data <<COMMIT -empty commit -COMMIT -INPUT_END test_expect_success 'B: accept empty committer' ' + cat >input <<-INPUT_END && + commit refs/heads/empty-committer-1 + committer <> $GIT_COMMITTER_DATE + data <<COMMIT + empty commit + COMMIT + INPUT_END + + test_when_finished "git update-ref -d refs/heads/empty-committer-1 + git gc + git prune" && git fast-import <input && out=$(git fsck) && echo "$out" && test -z "$out" ' -git update-ref -d refs/heads/empty-committer-1 || true - -git gc 2>/dev/null >/dev/null -git prune 2>/dev/null >/dev/null -cat >input <<INPUT_END -commit refs/heads/empty-committer-2 -committer <a@b.com> $GIT_COMMITTER_DATE -data <<COMMIT -empty commit -COMMIT -INPUT_END test_expect_success 'B: accept and fixup committer with no name' ' + cat >input <<-INPUT_END && + commit refs/heads/empty-committer-2 + committer <a@b.com> $GIT_COMMITTER_DATE + data <<COMMIT + empty commit + COMMIT + INPUT_END + + test_when_finished "git update-ref -d refs/heads/empty-committer-2 + git gc + git prune" && git fast-import <input && out=$(git fsck) && echo "$out" && test -z "$out" ' -git update-ref -d refs/heads/empty-committer-2 || true -git gc 2>/dev/null >/dev/null -git prune 2>/dev/null >/dev/null - -cat >input <<INPUT_END -commit refs/heads/invalid-committer -committer Name email> $GIT_COMMITTER_DATE -data <<COMMIT -empty commit -COMMIT -INPUT_END test_expect_success 'B: fail on invalid committer (1)' ' + cat >input <<-INPUT_END && + commit refs/heads/invalid-committer + committer Name email> $GIT_COMMITTER_DATE + data <<COMMIT + empty commit + COMMIT + INPUT_END + + test_when_finished "git update-ref -d refs/heads/invalid-committer" && test_must_fail git fast-import <input ' -git update-ref -d refs/heads/invalid-committer || true -cat >input <<INPUT_END -commit refs/heads/invalid-committer -committer Name <e<mail> $GIT_COMMITTER_DATE -data <<COMMIT -empty commit -COMMIT -INPUT_END test_expect_success 'B: fail on invalid committer (2)' ' + cat >input <<-INPUT_END && + commit refs/heads/invalid-committer + committer Name <e<mail> $GIT_COMMITTER_DATE + data <<COMMIT + empty commit + COMMIT + INPUT_END + + test_when_finished "git update-ref -d refs/heads/invalid-committer" && test_must_fail git fast-import <input ' -git update-ref -d refs/heads/invalid-committer || true -cat >input <<INPUT_END -commit refs/heads/invalid-committer -committer Name <email>> $GIT_COMMITTER_DATE -data <<COMMIT -empty commit -COMMIT -INPUT_END test_expect_success 'B: fail on invalid committer (3)' ' + cat >input <<-INPUT_END && + commit refs/heads/invalid-committer + committer Name <email>> $GIT_COMMITTER_DATE + data <<COMMIT + empty commit + COMMIT + INPUT_END + + test_when_finished "git update-ref -d refs/heads/invalid-committer" && test_must_fail git fast-import <input ' -git update-ref -d refs/heads/invalid-committer || true -cat >input <<INPUT_END -commit refs/heads/invalid-committer -committer Name <email $GIT_COMMITTER_DATE -data <<COMMIT -empty commit -COMMIT -INPUT_END test_expect_success 'B: fail on invalid committer (4)' ' + cat >input <<-INPUT_END && + commit refs/heads/invalid-committer + committer Name <email $GIT_COMMITTER_DATE + data <<COMMIT + empty commit + COMMIT + INPUT_END + + test_when_finished "git update-ref -d refs/heads/invalid-committer" && test_must_fail git fast-import <input ' -git update-ref -d refs/heads/invalid-committer || true -cat >input <<INPUT_END -commit refs/heads/invalid-committer -committer Name<email> $GIT_COMMITTER_DATE -data <<COMMIT -empty commit -COMMIT -INPUT_END test_expect_success 'B: fail on invalid committer (5)' ' + cat >input <<-INPUT_END && + commit refs/heads/invalid-committer + committer Name<email> $GIT_COMMITTER_DATE + data <<COMMIT + empty commit + COMMIT + INPUT_END + + test_when_finished "git update-ref -d refs/heads/invalid-committer" && test_must_fail git fast-import <input ' -git update-ref -d refs/heads/invalid-committer || true ### ### series C ### -newf=`echo hi newf | git hash-object -w --stdin` -oldf=`git rev-parse --verify master:file2` -test_tick -cat >input <<INPUT_END -commit refs/heads/branch -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -second -COMMIT - -from refs/heads/master -M 644 $oldf file2/oldf -M 755 $newf file2/newf -D file3 - -INPUT_END -test_expect_success \ - 'C: incremental import create pack from stdin' \ - 'git fast-import <input && - git whatchanged branch' +test_expect_success 'C: incremental import create pack from stdin' ' + newf=$(echo hi newf | git hash-object -w --stdin) && + oldf=$(git rev-parse --verify master:file2) && + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/branch + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + second + COMMIT + + from refs/heads/master + M 644 $oldf file2/oldf + M 755 $newf file2/newf + D file3 + + INPUT_END + + git fast-import <input && + git whatchanged branch +' test_expect_success 'C: verify pack' ' verify_packs ' -test_expect_success \ - 'C: validate reuse existing blob' \ - 'test $newf = `git rev-parse --verify branch:file2/newf` && - test $oldf = `git rev-parse --verify branch:file2/oldf`' - -cat >expect <<EOF -parent `git rev-parse --verify master^0` -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE - -second -EOF -test_expect_success \ - 'C: verify commit' \ - 'git cat-file commit branch | sed 1d >actual && - test_cmp expect actual' - -cat >expect <<EOF -:000000 100755 0000000000000000000000000000000000000000 f1fb5da718392694d0076d677d6d0e364c79b0bc A file2/newf -:100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 R100 file2 file2/oldf -:100644 000000 0d92e9f3374ae2947c23aa477cbc68ce598135f1 0000000000000000000000000000000000000000 D file3 -EOF -git diff-tree -M -r master branch >actual -test_expect_success \ - 'C: validate rename result' \ - 'compare_diff_raw expect actual' +test_expect_success 'C: validate reuse existing blob' ' + test $newf = $(git rev-parse --verify branch:file2/newf) && + test $oldf = $(git rev-parse --verify branch:file2/oldf) +' + +test_expect_success 'C: verify commit' ' + cat >expect <<-EOF && + parent $(git rev-parse --verify master^0) + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + + second + EOF + + git cat-file commit branch | sed 1d >actual && + test_cmp expect actual +' + +test_expect_success 'C: validate rename result' ' + cat >expect <<-EOF && + :000000 100755 0000000000000000000000000000000000000000 f1fb5da718392694d0076d677d6d0e364c79b0bc A file2/newf + :100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 R100 file2 file2/oldf + :100644 000000 0d92e9f3374ae2947c23aa477cbc68ce598135f1 0000000000000000000000000000000000000000 D file3 + EOF + git diff-tree -M -r master branch >actual && + compare_diff_raw expect actual +' ### ### series D ### -test_tick -cat >input <<INPUT_END -commit refs/heads/branch -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -third -COMMIT - -from refs/heads/branch^0 -M 644 inline newdir/interesting -data <<EOF -$file5_data -EOF - -M 755 inline newdir/exec.sh -data <<EOF -$file6_data -EOF - -INPUT_END -test_expect_success \ - 'D: inline data in commit' \ - 'git fast-import <input && - git whatchanged branch' +test_expect_success 'D: inline data in commit' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/branch + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + third + COMMIT + + from refs/heads/branch^0 + M 644 inline newdir/interesting + data <<EOF + $file5_data + EOF + + M 755 inline newdir/exec.sh + data <<EOF + $file6_data + EOF + + INPUT_END + + git fast-import <input && + git whatchanged branch +' test_expect_success 'D: verify pack' ' verify_packs ' -cat >expect <<EOF -:000000 100755 0000000000000000000000000000000000000000 e74b7d465e52746be2b4bae983670711e6e66657 A newdir/exec.sh -:000000 100644 0000000000000000000000000000000000000000 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 A newdir/interesting -EOF -git diff-tree -M -r branch^ branch >actual -test_expect_success \ - 'D: validate new files added' \ - 'compare_diff_raw expect actual' +test_expect_success 'D: validate new files added' ' + cat >expect <<-EOF && + :000000 100755 0000000000000000000000000000000000000000 e74b7d465e52746be2b4bae983670711e6e66657 A newdir/exec.sh + :000000 100644 0000000000000000000000000000000000000000 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 A newdir/interesting + EOF + git diff-tree -M -r branch^ branch >actual && + compare_diff_raw expect actual +' -echo "$file5_data" >expect -test_expect_success \ - 'D: verify file5' \ - 'git cat-file blob branch:newdir/interesting >actual && - test_cmp expect actual' +test_expect_success 'D: verify file5' ' + echo "$file5_data" >expect && + git cat-file blob branch:newdir/interesting >actual && + test_cmp expect actual +' -echo "$file6_data" >expect -test_expect_success \ - 'D: verify file6' \ - 'git cat-file blob branch:newdir/exec.sh >actual && - test_cmp expect actual' +test_expect_success 'D: verify file6' ' + echo "$file6_data" >expect && + git cat-file blob branch:newdir/exec.sh >actual && + test_cmp expect actual +' ### ### series E ### -cat >input <<INPUT_END -commit refs/heads/branch -author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> Tue Feb 6 11:22:18 2007 -0500 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> Tue Feb 6 12:35:02 2007 -0500 -data <<COMMIT -RFC 2822 type date -COMMIT +test_expect_success 'E: rfc2822 date, --date-format=raw' ' + cat >input <<-INPUT_END && + commit refs/heads/branch + author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> Tue Feb 6 11:22:18 2007 -0500 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> Tue Feb 6 12:35:02 2007 -0500 + data <<COMMIT + RFC 2822 type date + COMMIT + + from refs/heads/branch^0 -from refs/heads/branch^0 + INPUT_END -INPUT_END -test_expect_success 'E: rfc2822 date, --date-format=raw' ' - test_must_fail git fast-import --date-format=raw <input + test_must_fail git fast-import --date-format=raw <input +' +test_expect_success 'E: rfc2822 date, --date-format=rfc2822' ' + git fast-import --date-format=rfc2822 <input ' -test_expect_success \ - 'E: rfc2822 date, --date-format=rfc2822' \ - 'git fast-import --date-format=rfc2822 <input' test_expect_success 'E: verify pack' ' verify_packs ' -cat >expect <<EOF -author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> 1170778938 -0500 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1170783302 -0500 +test_expect_success 'E: verify commit' ' + cat >expect <<-EOF && + author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> 1170778938 -0500 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1170783302 -0500 -RFC 2822 type date -EOF -test_expect_success \ - 'E: verify commit' \ - 'git cat-file commit branch | sed 1,2d >actual && - test_cmp expect actual' + RFC 2822 type date + EOF + git cat-file commit branch | sed 1,2d >actual && + test_cmp expect actual +' ### ### series F ### -old_branch=`git rev-parse --verify branch^0` -test_tick -cat >input <<INPUT_END -commit refs/heads/branch -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -losing things already? -COMMIT - -from refs/heads/branch~1 - -reset refs/heads/other -from refs/heads/branch - -INPUT_END -test_expect_success \ - 'F: non-fast-forward update skips' \ - 'if git fast-import <input - then - echo BAD gfi did not fail - return 1 - else - if test $old_branch = `git rev-parse --verify branch^0` - then - : branch unaffected and failure returned - return 0 - else - echo BAD gfi changed branch $old_branch - return 1 - fi - fi - ' +test_expect_success 'F: non-fast-forward update skips' ' + old_branch=$(git rev-parse --verify branch^0) && + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/branch + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + losing things already? + COMMIT + + from refs/heads/branch~1 + + reset refs/heads/other + from refs/heads/branch + + INPUT_END + + test_must_fail git fast-import <input && + # branch must remain unaffected + test $old_branch = $(git rev-parse --verify branch^0) +' test_expect_success 'F: verify pack' ' verify_packs ' -cat >expect <<EOF -tree `git rev-parse branch~1^{tree}` -parent `git rev-parse branch~1` -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE +test_expect_success 'F: verify other commit' ' + cat >expect <<-EOF && + tree $(git rev-parse branch~1^{tree}) + parent $(git rev-parse branch~1) + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -losing things already? -EOF -test_expect_success \ - 'F: verify other commit' \ - 'git cat-file commit other >actual && - test_cmp expect actual' + losing things already? + EOF + git cat-file commit other >actual && + test_cmp expect actual +' ### ### series G ### -old_branch=`git rev-parse --verify branch^0` -test_tick -cat >input <<INPUT_END -commit refs/heads/branch -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -losing things already? -COMMIT +test_expect_success 'G: non-fast-forward update forced' ' + old_branch=$(git rev-parse --verify branch^0) && + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/branch + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + losing things already? + COMMIT -from refs/heads/branch~1 + from refs/heads/branch~1 -INPUT_END -test_expect_success \ - 'G: non-fast-forward update forced' \ - 'git fast-import --force <input' + INPUT_END + git fast-import --force <input +' test_expect_success 'G: verify pack' ' verify_packs ' -test_expect_success \ - 'G: branch changed, but logged' \ - 'test $old_branch != `git rev-parse --verify branch^0` && - test $old_branch = `git rev-parse --verify branch@{1}`' +test_expect_success 'G: branch changed, but logged' ' + test $old_branch != $(git rev-parse --verify branch^0) && + test $old_branch = $(git rev-parse --verify branch@{1}) +' ### ### series H ### -test_tick -cat >input <<INPUT_END -commit refs/heads/H -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -third -COMMIT - -from refs/heads/branch^0 -M 644 inline i-will-die -data <<EOF -this file will never exist. -EOF - -deleteall -M 644 inline h/e/l/lo -data <<EOF -$file5_data -EOF - -INPUT_END -test_expect_success \ - 'H: deletall, add 1' \ - 'git fast-import <input && - git whatchanged H' +test_expect_success 'H: deletall, add 1' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/H + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + third + COMMIT + + from refs/heads/branch^0 + M 644 inline i-will-die + data <<EOF + this file will never exist. + EOF + + deleteall + M 644 inline h/e/l/lo + data <<EOF + $file5_data + EOF + + INPUT_END + git fast-import <input && + git whatchanged H +' test_expect_success 'H: verify pack' ' verify_packs ' -cat >expect <<EOF -:100755 000000 f1fb5da718392694d0076d677d6d0e364c79b0bc 0000000000000000000000000000000000000000 D file2/newf -:100644 000000 7123f7f44e39be127c5eb701e5968176ee9d78b1 0000000000000000000000000000000000000000 D file2/oldf -:100755 000000 85df50785d62d3b05ab03d9cbf7e4a0b49449730 0000000000000000000000000000000000000000 D file4 -:100644 100644 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 R100 newdir/interesting h/e/l/lo -:100755 000000 e74b7d465e52746be2b4bae983670711e6e66657 0000000000000000000000000000000000000000 D newdir/exec.sh -EOF -git diff-tree -M -r H^ H >actual -test_expect_success \ - 'H: validate old files removed, new files added' \ - 'compare_diff_raw expect actual' - -echo "$file5_data" >expect -test_expect_success \ - 'H: verify file' \ - 'git cat-file blob H:h/e/l/lo >actual && - test_cmp expect actual' +test_expect_success 'H: validate old files removed, new files added' ' + cat >expect <<-EOF && + :100755 000000 f1fb5da718392694d0076d677d6d0e364c79b0bc 0000000000000000000000000000000000000000 D file2/newf + :100644 000000 7123f7f44e39be127c5eb701e5968176ee9d78b1 0000000000000000000000000000000000000000 D file2/oldf + :100755 000000 85df50785d62d3b05ab03d9cbf7e4a0b49449730 0000000000000000000000000000000000000000 D file4 + :100644 100644 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 R100 newdir/interesting h/e/l/lo + :100755 000000 e74b7d465e52746be2b4bae983670711e6e66657 0000000000000000000000000000000000000000 D newdir/exec.sh + EOF + git diff-tree -M -r H^ H >actual && + compare_diff_raw expect actual +' + +test_expect_success 'H: verify file' ' + echo "$file5_data" >expect && + git cat-file blob H:h/e/l/lo >actual && + test_cmp expect actual +' ### ### series I ### -cat >input <<INPUT_END -commit refs/heads/export-boundary -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -we have a border. its only 40 characters wide. -COMMIT +test_expect_success 'I: export-pack-edges' ' + cat >input <<-INPUT_END && + commit refs/heads/export-boundary + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + we have a border. its only 40 characters wide. + COMMIT -from refs/heads/branch + from refs/heads/branch -INPUT_END -test_expect_success \ - 'I: export-pack-edges' \ - 'git fast-import --export-pack-edges=edges.list <input' + INPUT_END + git fast-import --export-pack-edges=edges.list <input +' -cat >expect <<EOF -.git/objects/pack/pack-.pack: `git rev-parse --verify export-boundary` -EOF -test_expect_success \ - 'I: verify edge list' \ - 'sed -e s/pack-.*pack/pack-.pack/ edges.list >actual && - test_cmp expect actual' +test_expect_success 'I: verify edge list' ' + cat >expect <<-EOF && + .git/objects/pack/pack-.pack: $(git rev-parse --verify export-boundary) + EOF + sed -e s/pack-.*pack/pack-.pack/ edges.list >actual && + test_cmp expect actual +' ### ### series J ### -cat >input <<INPUT_END -commit refs/heads/J -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -create J -COMMIT - -from refs/heads/branch - -reset refs/heads/J - -commit refs/heads/J -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -initialize J -COMMIT - -INPUT_END -test_expect_success \ - 'J: reset existing branch creates empty commit' \ - 'git fast-import <input' -test_expect_success \ - 'J: branch has 1 commit, empty tree' \ - 'test 1 = `git rev-list J | wc -l` && - test 0 = `git ls-tree J | wc -l`' - -cat >input <<INPUT_END -reset refs/heads/J2 - -tag wrong_tag -from refs/heads/J2 -data <<EOF -Tag branch that was reset. -EOF -INPUT_END -test_expect_success \ - 'J: tag must fail on empty branch' \ - 'test_must_fail git fast-import <input' +test_expect_success 'J: reset existing branch creates empty commit' ' + cat >input <<-INPUT_END && + commit refs/heads/J + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + create J + COMMIT + + from refs/heads/branch + + reset refs/heads/J + + commit refs/heads/J + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + initialize J + COMMIT + + INPUT_END + git fast-import <input +' +test_expect_success 'J: branch has 1 commit, empty tree' ' + test 1 = $(git rev-list J | wc -l) && + test 0 = $(git ls-tree J | wc -l) +' + +test_expect_success 'J: tag must fail on empty branch' ' + cat >input <<-INPUT_END && + reset refs/heads/J2 + + tag wrong_tag + from refs/heads/J2 + data <<EOF + Tag branch that was reset. + EOF + INPUT_END + test_must_fail git fast-import <input +' + ### ### series K ### -cat >input <<INPUT_END -commit refs/heads/K -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -create K -COMMIT +test_expect_success 'K: reinit branch with from' ' + cat >input <<-INPUT_END && + commit refs/heads/K + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + create K + COMMIT -from refs/heads/branch + from refs/heads/branch -commit refs/heads/K -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -redo K -COMMIT + commit refs/heads/K + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + redo K + COMMIT -from refs/heads/branch^1 + from refs/heads/branch^1 -INPUT_END -test_expect_success \ - 'K: reinit branch with from' \ - 'git fast-import <input' -test_expect_success \ - 'K: verify K^1 = branch^1' \ - 'test `git rev-parse --verify branch^1` \ - = `git rev-parse --verify K^1`' + INPUT_END + git fast-import <input +' +test_expect_success 'K: verify K^1 = branch^1' ' + test $(git rev-parse --verify branch^1) \ + = $(git rev-parse --verify K^1) +' ### ### series L ### -cat >input <<INPUT_END -blob -mark :1 -data <<EOF -some data -EOF - -blob -mark :2 -data <<EOF -other data -EOF - -commit refs/heads/L -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -create L -COMMIT - -M 644 :1 b. -M 644 :1 b/other -M 644 :1 ba - -commit refs/heads/L -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -update L -COMMIT - -M 644 :2 b. -M 644 :2 b/other -M 644 :2 ba -INPUT_END - -cat >expect <<EXPECT_END -:100644 100644 4268632... 55d3a52... M b. -:040000 040000 0ae5cac... 443c768... M b -:100644 100644 4268632... 55d3a52... M ba -EXPECT_END - -test_expect_success \ - 'L: verify internal tree sorting' \ - 'git fast-import <input && - git diff-tree --abbrev --raw L^ L >output && - test_cmp expect output' - -cat >input <<INPUT_END -blob -mark :1 -data <<EOF -the data -EOF - -commit refs/heads/L2 -committer C O Mitter <committer@example.com> 1112912473 -0700 -data <<COMMIT -init L2 -COMMIT -M 644 :1 a/b/c -M 644 :1 a/b/d -M 644 :1 a/e/f - -commit refs/heads/L2 -committer C O Mitter <committer@example.com> 1112912473 -0700 -data <<COMMIT -update L2 -COMMIT -C a g -C a/e g/b -M 644 :1 g/b/h -INPUT_END - -cat <<EOF >expect -g/b/f -g/b/h -EOF - -test_expect_success \ - 'L: nested tree copy does not corrupt deltas' \ - 'git fast-import <input && +test_expect_success 'L: verify internal tree sorting' ' + cat >input <<-INPUT_END && + blob + mark :1 + data <<EOF + some data + EOF + + blob + mark :2 + data <<EOF + other data + EOF + + commit refs/heads/L + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + create L + COMMIT + + M 644 :1 b. + M 644 :1 b/other + M 644 :1 ba + + commit refs/heads/L + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + update L + COMMIT + + M 644 :2 b. + M 644 :2 b/other + M 644 :2 ba + INPUT_END + + cat >expect <<-EXPECT_END && + :100644 100644 4268632... 55d3a52... M b. + :040000 040000 0ae5cac... 443c768... M b + :100644 100644 4268632... 55d3a52... M ba + EXPECT_END + + git fast-import <input && + git diff-tree --abbrev --raw L^ L >output && + test_cmp expect output +' + +test_expect_success 'L: nested tree copy does not corrupt deltas' ' + cat >input <<-INPUT_END && + blob + mark :1 + data <<EOF + the data + EOF + + commit refs/heads/L2 + committer C O Mitter <committer@example.com> 1112912473 -0700 + data <<COMMIT + init L2 + COMMIT + M 644 :1 a/b/c + M 644 :1 a/b/d + M 644 :1 a/e/f + + commit refs/heads/L2 + committer C O Mitter <committer@example.com> 1112912473 -0700 + data <<COMMIT + update L2 + COMMIT + C a g + C a/e g/b + M 644 :1 g/b/h + INPUT_END + + cat >expect <<-\EOF && + g/b/f + g/b/h + EOF + + test_when_finished "git update-ref -d refs/heads/L2" && + git fast-import <input && git ls-tree L2 g/b/ >tmp && cat tmp | cut -f 2 >actual && test_cmp expect actual && - git fsck `git rev-parse L2`' - -git update-ref -d refs/heads/L2 + git fsck $(git rev-parse L2) +' ### ### series M ### -test_tick -cat >input <<INPUT_END -commit refs/heads/M1 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -file rename -COMMIT - -from refs/heads/branch^0 -R file2/newf file2/n.e.w.f - -INPUT_END - -cat >expect <<EOF -:100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc R100 file2/newf file2/n.e.w.f -EOF -test_expect_success \ - 'M: rename file in same subdirectory' \ - 'git fast-import <input && - git diff-tree -M -r M1^ M1 >actual && - compare_diff_raw expect actual' - -cat >input <<INPUT_END -commit refs/heads/M2 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -file rename -COMMIT - -from refs/heads/branch^0 -R file2/newf i/am/new/to/you - -INPUT_END - -cat >expect <<EOF -:100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc R100 file2/newf i/am/new/to/you -EOF -test_expect_success \ - 'M: rename file to new subdirectory' \ - 'git fast-import <input && - git diff-tree -M -r M2^ M2 >actual && - compare_diff_raw expect actual' - -cat >input <<INPUT_END -commit refs/heads/M3 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -file rename -COMMIT - -from refs/heads/M2^0 -R i other/sub - -INPUT_END - -cat >expect <<EOF -:100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc R100 i/am/new/to/you other/sub/am/new/to/you -EOF -test_expect_success \ - 'M: rename subdirectory to new subdirectory' \ - 'git fast-import <input && - git diff-tree -M -r M3^ M3 >actual && - compare_diff_raw expect actual' - -cat >input <<INPUT_END -commit refs/heads/M4 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -rename root -COMMIT - -from refs/heads/M2^0 -R "" sub - -INPUT_END - -cat >expect <<EOF -:100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 R100 file2/oldf sub/file2/oldf -:100755 100755 85df50785d62d3b05ab03d9cbf7e4a0b49449730 85df50785d62d3b05ab03d9cbf7e4a0b49449730 R100 file4 sub/file4 -:100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc R100 i/am/new/to/you sub/i/am/new/to/you -:100755 100755 e74b7d465e52746be2b4bae983670711e6e66657 e74b7d465e52746be2b4bae983670711e6e66657 R100 newdir/exec.sh sub/newdir/exec.sh -:100644 100644 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 R100 newdir/interesting sub/newdir/interesting -EOF -test_expect_success \ - 'M: rename root to subdirectory' \ - 'git fast-import <input && - git diff-tree -M -r M4^ M4 >actual && - cat actual && - compare_diff_raw expect actual' +test_expect_success 'M: rename file in same subdirectory' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/M1 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + file rename + COMMIT + + from refs/heads/branch^0 + R file2/newf file2/n.e.w.f + + INPUT_END + + cat >expect <<-EOF && + :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc R100 file2/newf file2/n.e.w.f + EOF + git fast-import <input && + git diff-tree -M -r M1^ M1 >actual && + compare_diff_raw expect actual +' + +test_expect_success 'M: rename file to new subdirectory' ' + cat >input <<-INPUT_END && + commit refs/heads/M2 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + file rename + COMMIT + + from refs/heads/branch^0 + R file2/newf i/am/new/to/you + + INPUT_END + + cat >expect <<-EOF && + :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc R100 file2/newf i/am/new/to/you + EOF + git fast-import <input && + git diff-tree -M -r M2^ M2 >actual && + compare_diff_raw expect actual +' + +test_expect_success 'M: rename subdirectory to new subdirectory' ' + cat >input <<-INPUT_END && + commit refs/heads/M3 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + file rename + COMMIT + + from refs/heads/M2^0 + R i other/sub + + INPUT_END + + cat >expect <<-EOF && + :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc R100 i/am/new/to/you other/sub/am/new/to/you + EOF + git fast-import <input && + git diff-tree -M -r M3^ M3 >actual && + compare_diff_raw expect actual +' + +test_expect_success 'M: rename root to subdirectory' ' + cat >input <<-INPUT_END && + commit refs/heads/M4 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + rename root + COMMIT + + from refs/heads/M2^0 + R "" sub + + INPUT_END + + cat >expect <<-EOF && + :100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 R100 file2/oldf sub/file2/oldf + :100755 100755 85df50785d62d3b05ab03d9cbf7e4a0b49449730 85df50785d62d3b05ab03d9cbf7e4a0b49449730 R100 file4 sub/file4 + :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc R100 i/am/new/to/you sub/i/am/new/to/you + :100755 100755 e74b7d465e52746be2b4bae983670711e6e66657 e74b7d465e52746be2b4bae983670711e6e66657 R100 newdir/exec.sh sub/newdir/exec.sh + :100644 100644 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 R100 newdir/interesting sub/newdir/interesting + EOF + git fast-import <input && + git diff-tree -M -r M4^ M4 >actual && + cat actual && + compare_diff_raw expect actual +' ### ### series N ### -test_tick -cat >input <<INPUT_END -commit refs/heads/N1 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -file copy -COMMIT - -from refs/heads/branch^0 -C file2/newf file2/n.e.w.f - -INPUT_END - -cat >expect <<EOF -:100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc C100 file2/newf file2/n.e.w.f -EOF -test_expect_success \ - 'N: copy file in same subdirectory' \ - 'git fast-import <input && - git diff-tree -C --find-copies-harder -r N1^ N1 >actual && - compare_diff_raw expect actual' - -cat >input <<INPUT_END -commit refs/heads/N2 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -clean directory copy -COMMIT - -from refs/heads/branch^0 -C file2 file3 - -commit refs/heads/N2 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -modify directory copy -COMMIT - -M 644 inline file3/file5 -data <<EOF -$file5_data -EOF - -INPUT_END - -cat >expect <<EOF -:100644 100644 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 C100 newdir/interesting file3/file5 -:100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc C100 file2/newf file3/newf -:100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 C100 file2/oldf file3/oldf -EOF -test_expect_success \ - 'N: copy then modify subdirectory' \ - 'git fast-import <input && - git diff-tree -C --find-copies-harder -r N2^^ N2 >actual && - compare_diff_raw expect actual' - -cat >input <<INPUT_END -commit refs/heads/N3 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -dirty directory copy -COMMIT - -from refs/heads/branch^0 -M 644 inline file2/file5 -data <<EOF -$file5_data -EOF - -C file2 file3 -D file2/file5 - -INPUT_END - -test_expect_success \ - 'N: copy dirty subdirectory' \ - 'git fast-import <input && - test `git rev-parse N2^{tree}` = `git rev-parse N3^{tree}`' - -test_expect_success \ - 'N: copy directory by id' \ - 'cat >expect <<-\EOF && +test_expect_success 'N: copy file in same subdirectory' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/N1 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + file copy + COMMIT + + from refs/heads/branch^0 + C file2/newf file2/n.e.w.f + + INPUT_END + + cat >expect <<-EOF && + :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc C100 file2/newf file2/n.e.w.f + EOF + git fast-import <input && + git diff-tree -C --find-copies-harder -r N1^ N1 >actual && + compare_diff_raw expect actual +' + +test_expect_success 'N: copy then modify subdirectory' ' + cat >input <<-INPUT_END && + commit refs/heads/N2 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + clean directory copy + COMMIT + + from refs/heads/branch^0 + C file2 file3 + + commit refs/heads/N2 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + modify directory copy + COMMIT + + M 644 inline file3/file5 + data <<EOF + $file5_data + EOF + + INPUT_END + + cat >expect <<-EOF && + :100644 100644 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 C100 newdir/interesting file3/file5 + :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc C100 file2/newf file3/newf + :100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 C100 file2/oldf file3/oldf + EOF + git fast-import <input && + git diff-tree -C --find-copies-harder -r N2^^ N2 >actual && + compare_diff_raw expect actual +' + +test_expect_success 'N: copy dirty subdirectory' ' + cat >input <<-INPUT_END && + commit refs/heads/N3 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + dirty directory copy + COMMIT + + from refs/heads/branch^0 + M 644 inline file2/file5 + data <<EOF + $file5_data + EOF + + C file2 file3 + D file2/file5 + + INPUT_END + + git fast-import <input && + test $(git rev-parse N2^{tree}) = $(git rev-parse N3^{tree}) +' + +test_expect_success 'N: copy directory by id' ' + cat >expect <<-\EOF && :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc C100 file2/newf file3/newf :100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 C100 file2/oldf file3/oldf EOF - subdir=$(git rev-parse refs/heads/branch^0:file2) && - cat >input <<-INPUT_END && + subdir=$(git rev-parse refs/heads/branch^0:file2) && + cat >input <<-INPUT_END && commit refs/heads/N4 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1127,9 +1113,10 @@ test_expect_success \ from refs/heads/branch^0 M 040000 $subdir file3 INPUT_END - git fast-import <input && - git diff-tree -C --find-copies-harder -r N4^ N4 >actual && - compare_diff_raw expect actual' + git fast-import <input && + git diff-tree -C --find-copies-harder -r N4^ N4 >actual && + compare_diff_raw expect actual +' test_expect_success PIPE 'N: read and copy directory' ' cat >expect <<-\EOF && @@ -1202,14 +1189,13 @@ test_expect_success PIPE 'N: empty directory reads as missing' ' test_cmp expect actual ' -test_expect_success \ - 'N: copy root directory by tree hash' \ - 'cat >expect <<-\EOF && +test_expect_success 'N: copy root directory by tree hash' ' + cat >expect <<-\EOF && :100755 000000 f1fb5da718392694d0076d677d6d0e364c79b0bc 0000000000000000000000000000000000000000 D file3/newf :100644 000000 7123f7f44e39be127c5eb701e5968176ee9d78b1 0000000000000000000000000000000000000000 D file3/oldf EOF - root=$(git rev-parse refs/heads/branch^0^{tree}) && - cat >input <<-INPUT_END && + root=$(git rev-parse refs/heads/branch^0^{tree}) && + cat >input <<-INPUT_END && commit refs/heads/N6 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1219,20 +1205,20 @@ test_expect_success \ from refs/heads/branch^0 M 040000 $root "" INPUT_END - git fast-import <input && - git diff-tree -C --find-copies-harder -r N4 N6 >actual && - compare_diff_raw expect actual' + git fast-import <input && + git diff-tree -C --find-copies-harder -r N4 N6 >actual && + compare_diff_raw expect actual +' -test_expect_success \ - 'N: copy root by path' \ - 'cat >expect <<-\EOF && +test_expect_success 'N: copy root by path' ' + cat >expect <<-\EOF && :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc C100 file2/newf oldroot/file2/newf :100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 C100 file2/oldf oldroot/file2/oldf :100755 100755 85df50785d62d3b05ab03d9cbf7e4a0b49449730 85df50785d62d3b05ab03d9cbf7e4a0b49449730 C100 file4 oldroot/file4 :100755 100755 e74b7d465e52746be2b4bae983670711e6e66657 e74b7d465e52746be2b4bae983670711e6e66657 C100 newdir/exec.sh oldroot/newdir/exec.sh :100644 100644 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 C100 newdir/interesting oldroot/newdir/interesting EOF - cat >input <<-INPUT_END && + cat >input <<-INPUT_END && commit refs/heads/N-copy-root-path committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1242,21 +1228,21 @@ test_expect_success \ from refs/heads/branch^0 C "" oldroot INPUT_END - git fast-import <input && - git diff-tree -C --find-copies-harder -r branch N-copy-root-path >actual && - compare_diff_raw expect actual' + git fast-import <input && + git diff-tree -C --find-copies-harder -r branch N-copy-root-path >actual && + compare_diff_raw expect actual +' -test_expect_success \ - 'N: delete directory by copying' \ - 'cat >expect <<-\EOF && +test_expect_success 'N: delete directory by copying' ' + cat >expect <<-\EOF && OBJID :100644 000000 OBJID OBJID D foo/bar/qux OBJID :000000 100644 OBJID OBJID A foo/bar/baz :000000 100644 OBJID OBJID A foo/bar/qux EOF - empty_tree=$(git mktree </dev/null) && - cat >input <<-INPUT_END && + empty_tree=$(git mktree </dev/null) && + cat >input <<-INPUT_END && commit refs/heads/N-delete committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1282,21 +1268,21 @@ test_expect_success \ M 040000 $empty_tree foo/bar/qux INPUT_END - git fast-import <input && - git rev-list N-delete | + git fast-import <input && + git rev-list N-delete | git diff-tree -r --stdin --root --always | sed -e "s/$_x40/OBJID/g" >actual && - test_cmp expect actual' + test_cmp expect actual +' -test_expect_success \ - 'N: modify copied tree' \ - 'cat >expect <<-\EOF && +test_expect_success 'N: modify copied tree' ' + cat >expect <<-\EOF && :100644 100644 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 C100 newdir/interesting file3/file5 :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc C100 file2/newf file3/newf :100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 C100 file2/oldf file3/oldf EOF - subdir=$(git rev-parse refs/heads/branch^0:file2) && - cat >input <<-INPUT_END && + subdir=$(git rev-parse refs/heads/branch^0:file2) && + cat >input <<-INPUT_END && commit refs/heads/N5 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1317,14 +1303,14 @@ test_expect_success \ $file5_data EOF INPUT_END - git fast-import <input && - git diff-tree -C --find-copies-harder -r N5^^ N5 >actual && - compare_diff_raw expect actual' - -test_expect_success \ - 'N: reject foo/ syntax' \ - 'subdir=$(git rev-parse refs/heads/branch^0:file2) && - test_must_fail git fast-import <<-INPUT_END + git fast-import <input && + git diff-tree -C --find-copies-harder -r N5^^ N5 >actual && + compare_diff_raw expect actual +' + +test_expect_success 'N: reject foo/ syntax' ' + subdir=$(git rev-parse refs/heads/branch^0:file2) && + test_must_fail git fast-import <<-INPUT_END commit refs/heads/N5B committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1333,11 +1319,11 @@ test_expect_success \ from refs/heads/branch^0 M 040000 $subdir file3/ - INPUT_END' + INPUT_END +' -test_expect_success \ - 'N: reject foo/ syntax in copy source' \ - 'test_must_fail git fast-import <<-INPUT_END +test_expect_success 'N: reject foo/ syntax in copy source' ' + test_must_fail git fast-import <<-INPUT_END commit refs/heads/N5C committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1346,11 +1332,11 @@ test_expect_success \ from refs/heads/branch^0 C file2/ file3 - INPUT_END' + INPUT_END +' -test_expect_success \ - 'N: reject foo/ syntax in rename source' \ - 'test_must_fail git fast-import <<-INPUT_END +test_expect_success 'N: reject foo/ syntax in rename source' ' + test_must_fail git fast-import <<-INPUT_END commit refs/heads/N5D committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1359,11 +1345,11 @@ test_expect_success \ from refs/heads/branch^0 R file2/ file3 - INPUT_END' + INPUT_END +' -test_expect_success \ - 'N: reject foo/ syntax in ls argument' \ - 'test_must_fail git fast-import <<-INPUT_END +test_expect_success 'N: reject foo/ syntax in ls argument' ' + test_must_fail git fast-import <<-INPUT_END commit refs/heads/N5E committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1372,13 +1358,13 @@ test_expect_success \ from refs/heads/branch^0 ls "file2/" - INPUT_END' + INPUT_END +' -test_expect_success \ - 'N: copy to root by id and modify' \ - 'echo "hello, world" >expect.foo && - echo hello >expect.bar && - git fast-import <<-SETUP_END && +test_expect_success 'N: copy to root by id and modify' ' + echo "hello, world" >expect.foo && + echo hello >expect.bar && + git fast-import <<-SETUP_END && commit refs/heads/N7 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1392,8 +1378,8 @@ test_expect_success \ EOF SETUP_END - tree=$(git rev-parse --verify N7:) && - git fast-import <<-INPUT_END && + tree=$(git rev-parse --verify N7:) && + git fast-import <<-INPUT_END && commit refs/heads/N8 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1406,15 +1392,15 @@ test_expect_success \ hello, world EOF INPUT_END - git show N8:foo/foo >actual.foo && - git show N8:foo/bar >actual.bar && - test_cmp expect.foo actual.foo && - test_cmp expect.bar actual.bar' - -test_expect_success \ - 'N: extract subtree' \ - 'branch=$(git rev-parse --verify refs/heads/branch^{tree}) && - cat >input <<-INPUT_END && + git show N8:foo/foo >actual.foo && + git show N8:foo/bar >actual.bar && + test_cmp expect.foo actual.foo && + test_cmp expect.bar actual.bar +' + +test_expect_success 'N: extract subtree' ' + branch=$(git rev-parse --verify refs/heads/branch^{tree}) && + cat >input <<-INPUT_END && commit refs/heads/N9 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1424,14 +1410,14 @@ test_expect_success \ M 040000 $branch "" C "newdir" "" INPUT_END - git fast-import <input && - git diff --exit-code branch:newdir N9' - -test_expect_success \ - 'N: modify subtree, extract it, and modify again' \ - 'echo hello >expect.baz && - echo hello, world >expect.qux && - git fast-import <<-SETUP_END && + git fast-import <input && + git diff --exit-code branch:newdir N9 +' + +test_expect_success 'N: modify subtree, extract it, and modify again' ' + echo hello >expect.baz && + echo hello, world >expect.qux && + git fast-import <<-SETUP_END && commit refs/heads/N10 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1445,8 +1431,8 @@ test_expect_success \ EOF SETUP_END - tree=$(git rev-parse --verify N10:) && - git fast-import <<-INPUT_END && + tree=$(git rev-parse --verify N10:) && + git fast-import <<-INPUT_END && commit refs/heads/N11 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -1461,676 +1447,692 @@ test_expect_success \ R "foo" "" C "bar/qux" "bar/quux" INPUT_END - git show N11:bar/baz >actual.baz && - git show N11:bar/qux >actual.qux && - git show N11:bar/quux >actual.quux && - test_cmp expect.baz actual.baz && - test_cmp expect.qux actual.qux && - test_cmp expect.qux actual.quux' + git show N11:bar/baz >actual.baz && + git show N11:bar/qux >actual.qux && + git show N11:bar/quux >actual.quux && + test_cmp expect.baz actual.baz && + test_cmp expect.qux actual.qux && + test_cmp expect.qux actual.quux' ### ### series O ### -cat >input <<INPUT_END -#we will -commit refs/heads/O1 -# -- ignore all of this text -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -# $GIT_COMMITTER_NAME has inserted here for his benefit. -data <<COMMIT -dirty directory copy -COMMIT - -# don't forget the import blank line! -# -# yes, we started from our usual base of branch^0. -# i like branch^0. -from refs/heads/branch^0 -# and we need to reuse file2/file5 from N3 above. -M 644 inline file2/file5 -# otherwise the tree will be different -data <<EOF -$file5_data -EOF - -# don't forget to copy file2 to file3 -C file2 file3 -# -# or to delete file5 from file2. -D file2/file5 -# are we done yet? - -INPUT_END - -test_expect_success \ - 'O: comments are all skipped' \ - 'git fast-import <input && - test `git rev-parse N3` = `git rev-parse O1`' - -cat >input <<INPUT_END -commit refs/heads/O2 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -dirty directory copy -COMMIT -from refs/heads/branch^0 -M 644 inline file2/file5 -data <<EOF -$file5_data -EOF -C file2 file3 -D file2/file5 - -INPUT_END - -test_expect_success \ - 'O: blank lines not necessary after data commands' \ - 'git fast-import <input && - test `git rev-parse N3` = `git rev-parse O2`' - -test_expect_success \ - 'O: repack before next test' \ - 'git repack -a -d' - -cat >input <<INPUT_END -commit refs/heads/O3 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -zstring -COMMIT -commit refs/heads/O3 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -zof -COMMIT -checkpoint -commit refs/heads/O3 -mark :5 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -zempty -COMMIT -checkpoint -commit refs/heads/O3 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -zcommits -COMMIT -reset refs/tags/O3-2nd -from :5 -reset refs/tags/O3-3rd -from :5 -INPUT_END - -cat >expect <<INPUT_END -string -of -empty -commits -INPUT_END -test_expect_success \ - 'O: blank lines not necessary after other commands' \ - 'git fast-import <input && - test 8 = `find .git/objects/pack -type f | wc -l` && - test `git rev-parse refs/tags/O3-2nd` = `git rev-parse O3^` && - git log --reverse --pretty=oneline O3 | sed s/^.*z// >actual && - test_cmp expect actual' - -cat >input <<INPUT_END -commit refs/heads/O4 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -zstring -COMMIT -commit refs/heads/O4 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -zof -COMMIT -progress Two commits down, 2 to go! -commit refs/heads/O4 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -zempty -COMMIT -progress Three commits down, 1 to go! -commit refs/heads/O4 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -zcommits -COMMIT -progress I'm done! -INPUT_END -test_expect_success \ - 'O: progress outputs as requested by input' \ - 'git fast-import <input >actual && - grep "progress " <input >expect && - test_cmp expect actual' +test_expect_success 'O: comments are all skipped' ' + cat >input <<-INPUT_END && + #we will + commit refs/heads/O1 + # -- ignore all of this text + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + # $GIT_COMMITTER_NAME has inserted here for his benefit. + data <<COMMIT + dirty directory copy + COMMIT + + # do not forget the import blank line! + # + # yes, we started from our usual base of branch^0. + # i like branch^0. + from refs/heads/branch^0 + # and we need to reuse file2/file5 from N3 above. + M 644 inline file2/file5 + # otherwise the tree will be different + data <<EOF + $file5_data + EOF + + # do not forget to copy file2 to file3 + C file2 file3 + # + # or to delete file5 from file2. + D file2/file5 + # are we done yet? + + INPUT_END + + git fast-import <input && + test $(git rev-parse N3) = $(git rev-parse O1) +' + +test_expect_success 'O: blank lines not necessary after data commands' ' + cat >input <<-INPUT_END && + commit refs/heads/O2 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + dirty directory copy + COMMIT + from refs/heads/branch^0 + M 644 inline file2/file5 + data <<EOF + $file5_data + EOF + C file2 file3 + D file2/file5 + + INPUT_END + + git fast-import <input && + test $(git rev-parse N3) = $(git rev-parse O2) +' + +test_expect_success 'O: repack before next test' ' + git repack -a -d +' + +test_expect_success 'O: blank lines not necessary after other commands' ' + cat >input <<-INPUT_END && + commit refs/heads/O3 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + zstring + COMMIT + commit refs/heads/O3 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + zof + COMMIT + checkpoint + commit refs/heads/O3 + mark :5 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + zempty + COMMIT + checkpoint + commit refs/heads/O3 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + zcommits + COMMIT + reset refs/tags/O3-2nd + from :5 + reset refs/tags/O3-3rd + from :5 + INPUT_END + + cat >expect <<-INPUT_END && + string + of + empty + commits + INPUT_END + + git fast-import <input && + test 8 = $(find .git/objects/pack -type f | wc -l) && + test $(git rev-parse refs/tags/O3-2nd) = $(git rev-parse O3^) && + git log --reverse --pretty=oneline O3 | sed s/^.*z// >actual && + test_cmp expect actual +' + +test_expect_success 'O: progress outputs as requested by input' ' + cat >input <<-INPUT_END && + commit refs/heads/O4 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + zstring + COMMIT + commit refs/heads/O4 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + zof + COMMIT + progress Two commits down, 2 to go! + commit refs/heads/O4 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + zempty + COMMIT + progress Three commits down, 1 to go! + commit refs/heads/O4 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + zcommits + COMMIT + progress done! + INPUT_END + git fast-import <input >actual && + grep "progress " <input >expect && + test_cmp expect actual +' ### ### series P (gitlinks) ### -cat >input <<INPUT_END -blob -mark :1 -data 10 -test file - -reset refs/heads/sub -commit refs/heads/sub -mark :2 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data 12 -sub_initial -M 100644 :1 file - -blob -mark :3 -data <<DATAEND -[submodule "sub"] - path = sub - url = "`pwd`/sub" -DATAEND - -commit refs/heads/subuse1 -mark :4 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data 8 -initial -from refs/heads/master -M 100644 :3 .gitmodules -M 160000 :2 sub - -blob -mark :5 -data 20 -test file -more data - -commit refs/heads/sub -mark :6 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data 11 -sub_second -from :2 -M 100644 :5 file - -commit refs/heads/subuse1 -mark :7 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data 7 -second -from :4 -M 160000 :6 sub - -INPUT_END - -test_expect_success \ - 'P: superproject & submodule mix' \ - 'git fast-import <input && - git checkout subuse1 && - rm -rf sub && mkdir sub && (cd sub && - git init && - git fetch --update-head-ok .. refs/heads/sub:refs/heads/master && - git checkout master) && - git submodule init && - git submodule update' - -SUBLAST=$(git rev-parse --verify sub) -SUBPREV=$(git rev-parse --verify sub^) - -cat >input <<INPUT_END -blob -mark :1 -data <<DATAEND -[submodule "sub"] - path = sub - url = "`pwd`/sub" -DATAEND - -commit refs/heads/subuse2 -mark :2 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data 8 -initial -from refs/heads/master -M 100644 :1 .gitmodules -M 160000 $SUBPREV sub - -commit refs/heads/subuse2 -mark :3 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data 7 -second -from :2 -M 160000 $SUBLAST sub - -INPUT_END - -test_expect_success \ - 'P: verbatim SHA gitlinks' \ - 'git branch -D sub && - git gc && git prune && - git fast-import <input && - test $(git rev-parse --verify subuse2) = $(git rev-parse --verify subuse1)' - -test_tick -cat >input <<INPUT_END -commit refs/heads/subuse3 -mark :1 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -corrupt -COMMIT - -from refs/heads/subuse2 -M 160000 inline sub -data <<DATA -$SUBPREV -DATA - -INPUT_END +test_expect_success 'P: superproject & submodule mix' ' + cat >input <<-INPUT_END && + blob + mark :1 + data 10 + test file -test_expect_success 'P: fail on inline gitlink' ' - test_must_fail git fast-import <input' + reset refs/heads/sub + commit refs/heads/sub + mark :2 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data 12 + sub_initial + M 100644 :1 file + + blob + mark :3 + data <<DATAEND + [submodule "sub"] + path = sub + url = "$(pwd)/sub" + DATAEND + + commit refs/heads/subuse1 + mark :4 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data 8 + initial + from refs/heads/master + M 100644 :3 .gitmodules + M 160000 :2 sub + + blob + mark :5 + data 20 + test file + more data + + commit refs/heads/sub + mark :6 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data 11 + sub_second + from :2 + M 100644 :5 file + + commit refs/heads/subuse1 + mark :7 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data 7 + second + from :4 + M 160000 :6 sub + + INPUT_END + + git fast-import <input && + git checkout subuse1 && + rm -rf sub && + mkdir sub && + ( + cd sub && + git init && + git fetch --update-head-ok .. refs/heads/sub:refs/heads/master && + git checkout master + ) && + git submodule init && + git submodule update +' + +test_expect_success 'P: verbatim SHA gitlinks' ' + SUBLAST=$(git rev-parse --verify sub) && + SUBPREV=$(git rev-parse --verify sub^) && + + cat >input <<-INPUT_END && + blob + mark :1 + data <<DATAEND + [submodule "sub"] + path = sub + url = "$(pwd)/sub" + DATAEND + + commit refs/heads/subuse2 + mark :2 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data 8 + initial + from refs/heads/master + M 100644 :1 .gitmodules + M 160000 $SUBPREV sub + + commit refs/heads/subuse2 + mark :3 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data 7 + second + from :2 + M 160000 $SUBLAST sub -test_tick -cat >input <<INPUT_END -blob -mark :1 -data <<DATA -$SUBPREV -DATA + INPUT_END -commit refs/heads/subuse3 -mark :2 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -corrupt -COMMIT + git branch -D sub && + git gc && + git prune && + git fast-import <input && + test $(git rev-parse --verify subuse2) = $(git rev-parse --verify subuse1) +' -from refs/heads/subuse2 -M 160000 :1 sub +test_expect_success 'P: fail on inline gitlink' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/subuse3 + mark :1 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + corrupt + COMMIT -INPUT_END + from refs/heads/subuse2 + M 160000 inline sub + data <<DATA + $SUBPREV + DATA + + INPUT_END + + test_must_fail git fast-import <input +' test_expect_success 'P: fail on blob mark in gitlink' ' - test_must_fail git fast-import <input' + test_tick && + cat >input <<-INPUT_END && + blob + mark :1 + data <<DATA + $SUBPREV + DATA + + commit refs/heads/subuse3 + mark :2 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + corrupt + COMMIT + + from refs/heads/subuse2 + M 160000 :1 sub + + INPUT_END + + test_must_fail git fast-import <input +' ### ### series Q (notes) ### -note1_data="The first note for the first commit" -note2_data="The first note for the second commit" -note3_data="The first note for the third commit" -note1b_data="The second note for the first commit" -note1c_data="The third note for the first commit" -note2b_data="The second note for the second commit" - -test_tick -cat >input <<INPUT_END -blob -mark :2 -data <<EOF -$file2_data -EOF - -commit refs/heads/notes-test -mark :3 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -first (:3) -COMMIT - -M 644 :2 file2 - -blob -mark :4 -data $file4_len -$file4_data -commit refs/heads/notes-test -mark :5 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -second (:5) -COMMIT - -M 644 :4 file4 - -commit refs/heads/notes-test -mark :6 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -third (:6) -COMMIT - -M 644 inline file5 -data <<EOF -$file5_data -EOF - -M 755 inline file6 -data <<EOF -$file6_data -EOF - -blob -mark :7 -data <<EOF -$note1_data -EOF - -blob -mark :8 -data <<EOF -$note2_data -EOF - -commit refs/notes/foobar -mark :9 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -notes (:9) -COMMIT - -N :7 :3 -N :8 :5 -N inline :6 -data <<EOF -$note3_data -EOF - -commit refs/notes/foobar -mark :10 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -notes (:10) -COMMIT - -N inline :3 -data <<EOF -$note1b_data -EOF - -commit refs/notes/foobar2 -mark :11 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -notes (:11) -COMMIT - -N inline :3 -data <<EOF -$note1c_data -EOF - -commit refs/notes/foobar -mark :12 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -notes (:12) -COMMIT - -deleteall -N inline :5 -data <<EOF -$note2b_data -EOF - -INPUT_END - -test_expect_success \ - 'Q: commit notes' \ - 'git fast-import <input && - git whatchanged notes-test' +test_expect_success 'Q: commit notes' ' + note1_data="The first note for the first commit" && + note2_data="The first note for the second commit" && + note3_data="The first note for the third commit" && + note1b_data="The second note for the first commit" && + note1c_data="The third note for the first commit" && + note2b_data="The second note for the second commit" && + + test_tick && + cat >input <<-INPUT_END && + blob + mark :2 + data <<EOF + $file2_data + EOF + + commit refs/heads/notes-test + mark :3 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + first (:3) + COMMIT + + M 644 :2 file2 + + blob + mark :4 + data $file4_len + $file4_data + commit refs/heads/notes-test + mark :5 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + second (:5) + COMMIT + + M 644 :4 file4 + + commit refs/heads/notes-test + mark :6 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + third (:6) + COMMIT + + M 644 inline file5 + data <<EOF + $file5_data + EOF + + M 755 inline file6 + data <<EOF + $file6_data + EOF + + blob + mark :7 + data <<EOF + $note1_data + EOF + + blob + mark :8 + data <<EOF + $note2_data + EOF + + commit refs/notes/foobar + mark :9 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + notes (:9) + COMMIT + + N :7 :3 + N :8 :5 + N inline :6 + data <<EOF + $note3_data + EOF + + commit refs/notes/foobar + mark :10 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + notes (:10) + COMMIT + + N inline :3 + data <<EOF + $note1b_data + EOF + + commit refs/notes/foobar2 + mark :11 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + notes (:11) + COMMIT + + N inline :3 + data <<EOF + $note1c_data + EOF + + commit refs/notes/foobar + mark :12 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + notes (:12) + COMMIT + + deleteall + N inline :5 + data <<EOF + $note2b_data + EOF + + INPUT_END + + git fast-import <input && + git whatchanged notes-test +' test_expect_success 'Q: verify pack' ' verify_packs ' -commit1=$(git rev-parse notes-test~2) -commit2=$(git rev-parse notes-test^) -commit3=$(git rev-parse notes-test) - -cat >expect <<EOF -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE - -first (:3) -EOF -test_expect_success \ - 'Q: verify first commit' \ - 'git cat-file commit notes-test~2 | sed 1d >actual && - test_cmp expect actual' - -cat >expect <<EOF -parent $commit1 -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE - -second (:5) -EOF -test_expect_success \ - 'Q: verify second commit' \ - 'git cat-file commit notes-test^ | sed 1d >actual && - test_cmp expect actual' - -cat >expect <<EOF -parent $commit2 -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE - -third (:6) -EOF -test_expect_success \ - 'Q: verify third commit' \ - 'git cat-file commit notes-test | sed 1d >actual && - test_cmp expect actual' - -cat >expect <<EOF -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE - -notes (:9) -EOF -test_expect_success \ - 'Q: verify first notes commit' \ - 'git cat-file commit refs/notes/foobar~2 | sed 1d >actual && - test_cmp expect actual' - -cat >expect.unsorted <<EOF -100644 blob $commit1 -100644 blob $commit2 -100644 blob $commit3 -EOF -cat expect.unsorted | sort >expect -test_expect_success \ - 'Q: verify first notes tree' \ - 'git cat-file -p refs/notes/foobar~2^{tree} | sed "s/ [0-9a-f]* / /" >actual && - test_cmp expect actual' - -echo "$note1_data" >expect -test_expect_success \ - 'Q: verify first note for first commit' \ - 'git cat-file blob refs/notes/foobar~2:$commit1 >actual && test_cmp expect actual' - -echo "$note2_data" >expect -test_expect_success \ - 'Q: verify first note for second commit' \ - 'git cat-file blob refs/notes/foobar~2:$commit2 >actual && test_cmp expect actual' - -echo "$note3_data" >expect -test_expect_success \ - 'Q: verify first note for third commit' \ - 'git cat-file blob refs/notes/foobar~2:$commit3 >actual && test_cmp expect actual' - -cat >expect <<EOF -parent `git rev-parse --verify refs/notes/foobar~2` -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE - -notes (:10) -EOF -test_expect_success \ - 'Q: verify second notes commit' \ - 'git cat-file commit refs/notes/foobar^ | sed 1d >actual && - test_cmp expect actual' - -cat >expect.unsorted <<EOF -100644 blob $commit1 -100644 blob $commit2 -100644 blob $commit3 -EOF -cat expect.unsorted | sort >expect -test_expect_success \ - 'Q: verify second notes tree' \ - 'git cat-file -p refs/notes/foobar^^{tree} | sed "s/ [0-9a-f]* / /" >actual && - test_cmp expect actual' - -echo "$note1b_data" >expect -test_expect_success \ - 'Q: verify second note for first commit' \ - 'git cat-file blob refs/notes/foobar^:$commit1 >actual && test_cmp expect actual' - -echo "$note2_data" >expect -test_expect_success \ - 'Q: verify first note for second commit' \ - 'git cat-file blob refs/notes/foobar^:$commit2 >actual && test_cmp expect actual' - -echo "$note3_data" >expect -test_expect_success \ - 'Q: verify first note for third commit' \ - 'git cat-file blob refs/notes/foobar^:$commit3 >actual && test_cmp expect actual' - -cat >expect <<EOF -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE - -notes (:11) -EOF -test_expect_success \ - 'Q: verify third notes commit' \ - 'git cat-file commit refs/notes/foobar2 | sed 1d >actual && - test_cmp expect actual' - -cat >expect.unsorted <<EOF -100644 blob $commit1 -EOF -cat expect.unsorted | sort >expect -test_expect_success \ - 'Q: verify third notes tree' \ - 'git cat-file -p refs/notes/foobar2^{tree} | sed "s/ [0-9a-f]* / /" >actual && - test_cmp expect actual' - -echo "$note1c_data" >expect -test_expect_success \ - 'Q: verify third note for first commit' \ - 'git cat-file blob refs/notes/foobar2:$commit1 >actual && test_cmp expect actual' - -cat >expect <<EOF -parent `git rev-parse --verify refs/notes/foobar^` -author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE - -notes (:12) -EOF -test_expect_success \ - 'Q: verify fourth notes commit' \ - 'git cat-file commit refs/notes/foobar | sed 1d >actual && - test_cmp expect actual' - -cat >expect.unsorted <<EOF -100644 blob $commit2 -EOF -cat expect.unsorted | sort >expect -test_expect_success \ - 'Q: verify fourth notes tree' \ - 'git cat-file -p refs/notes/foobar^{tree} | sed "s/ [0-9a-f]* / /" >actual && - test_cmp expect actual' - -echo "$note2b_data" >expect -test_expect_success \ - 'Q: verify second note for second commit' \ - 'git cat-file blob refs/notes/foobar:$commit2 >actual && test_cmp expect actual' - -cat >input <<EOF -reset refs/heads/Q0 - -commit refs/heads/note-Q0 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -Note for an empty branch. -COMMIT - -N inline refs/heads/Q0 -data <<NOTE -some note -NOTE -EOF -test_expect_success \ - 'Q: deny note on empty branch' \ - 'test_must_fail git fast-import <input' +test_expect_success 'Q: verify first commit' ' + commit1=$(git rev-parse notes-test~2) && + commit2=$(git rev-parse notes-test^) && + commit3=$(git rev-parse notes-test) && + + cat >expect <<-EOF && + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + + first (:3) + EOF + git cat-file commit notes-test~2 | sed 1d >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify second commit' ' + cat >expect <<-EOF && + parent $commit1 + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + + second (:5) + EOF + git cat-file commit notes-test^ | sed 1d >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify third commit' ' + cat >expect <<-EOF && + parent $commit2 + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + + third (:6) + EOF + git cat-file commit notes-test | sed 1d >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify first notes commit' ' + cat >expect <<-EOF && + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + + notes (:9) + EOF + git cat-file commit refs/notes/foobar~2 | sed 1d >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify first notes tree' ' + cat >expect.unsorted <<-EOF && + 100644 blob $commit1 + 100644 blob $commit2 + 100644 blob $commit3 + EOF + cat expect.unsorted | sort >expect && + git cat-file -p refs/notes/foobar~2^{tree} | sed "s/ [0-9a-f]* / /" >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify first note for first commit' ' + echo "$note1_data" >expect && + git cat-file blob refs/notes/foobar~2:$commit1 >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify first note for second commit' ' + echo "$note2_data" >expect && + git cat-file blob refs/notes/foobar~2:$commit2 >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify first note for third commit' ' + echo "$note3_data" >expect && + git cat-file blob refs/notes/foobar~2:$commit3 >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify second notes commit' ' + cat >expect <<-EOF && + parent $(git rev-parse --verify refs/notes/foobar~2) + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + + notes (:10) + EOF + git cat-file commit refs/notes/foobar^ | sed 1d >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify second notes tree' ' + cat >expect.unsorted <<-EOF && + 100644 blob $commit1 + 100644 blob $commit2 + 100644 blob $commit3 + EOF + cat expect.unsorted | sort >expect && + git cat-file -p refs/notes/foobar^^{tree} | sed "s/ [0-9a-f]* / /" >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify second note for first commit' ' + echo "$note1b_data" >expect && + git cat-file blob refs/notes/foobar^:$commit1 >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify first note for second commit' ' + echo "$note2_data" >expect && + git cat-file blob refs/notes/foobar^:$commit2 >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify first note for third commit' ' + echo "$note3_data" >expect && + git cat-file blob refs/notes/foobar^:$commit3 >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify third notes commit' ' + cat >expect <<-EOF && + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + + notes (:11) + EOF + git cat-file commit refs/notes/foobar2 | sed 1d >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify third notes tree' ' + cat >expect.unsorted <<-EOF && + 100644 blob $commit1 + EOF + cat expect.unsorted | sort >expect && + git cat-file -p refs/notes/foobar2^{tree} | sed "s/ [0-9a-f]* / /" >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify third note for first commit' ' + echo "$note1c_data" >expect && + git cat-file blob refs/notes/foobar2:$commit1 >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify fourth notes commit' ' + cat >expect <<-EOF && + parent $(git rev-parse --verify refs/notes/foobar^) + author $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + + notes (:12) + EOF + git cat-file commit refs/notes/foobar | sed 1d >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify fourth notes tree' ' + cat >expect.unsorted <<-EOF && + 100644 blob $commit2 + EOF + cat expect.unsorted | sort >expect && + git cat-file -p refs/notes/foobar^{tree} | sed "s/ [0-9a-f]* / /" >actual && + test_cmp expect actual +' + +test_expect_success 'Q: verify second note for second commit' ' + echo "$note2b_data" >expect && + git cat-file blob refs/notes/foobar:$commit2 >actual && + test_cmp expect actual +' + +test_expect_success 'Q: deny note on empty branch' ' + cat >input <<-EOF && + reset refs/heads/Q0 + + commit refs/heads/note-Q0 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + Note for an empty branch. + COMMIT + + N inline refs/heads/Q0 + data <<NOTE + some note + NOTE + EOF + test_must_fail git fast-import <input +' ### ### series R (feature and option) ### -cat >input <<EOF -feature no-such-feature-exists -EOF - test_expect_success 'R: abort on unsupported feature' ' + cat >input <<-EOF && + feature no-such-feature-exists + EOF + test_must_fail git fast-import <input ' -cat >input <<EOF -feature date-format=now -EOF - test_expect_success 'R: supported feature is accepted' ' + cat >input <<-EOF && + feature date-format=now + EOF + git fast-import <input ' -cat >input << EOF -blob -data 3 -hi -feature date-format=now -EOF - test_expect_success 'R: abort on receiving feature after data command' ' + cat >input <<-EOF && + blob + data 3 + hi + feature date-format=now + EOF + test_must_fail git fast-import <input ' -cat >input << EOF -feature import-marks=git.marks -feature import-marks=git2.marks -EOF - test_expect_success 'R: only one import-marks feature allowed per stream' ' + cat >input <<-EOF && + feature import-marks=git.marks + feature import-marks=git2.marks + EOF + test_must_fail git fast-import <input ' -cat >input << EOF -feature export-marks=git.marks -blob -mark :1 -data 3 -hi +test_expect_success 'R: export-marks feature results in a marks file being created' ' + cat >input <<-EOF && + feature export-marks=git.marks + blob + mark :1 + data 3 + hi -EOF + EOF -test_expect_success \ - 'R: export-marks feature results in a marks file being created' \ - 'cat input | git fast-import && - grep :1 git.marks' + cat input | git fast-import && + grep :1 git.marks +' -test_expect_success \ - 'R: export-marks options can be overridden by commandline options' \ - 'cat input | git fast-import --export-marks=other.marks && - grep :1 other.marks' +test_expect_success 'R: export-marks options can be overridden by commandline options' ' + cat input | git fast-import --export-marks=other.marks && + grep :1 other.marks +' test_expect_success 'R: catch typo in marks file name' ' test_must_fail git fast-import --import-marks=nonexistent.marks </dev/null && @@ -2234,62 +2236,62 @@ test_expect_success 'R: feature import-marks-if-exists' ' test_cmp expect io.marks ' -cat >input << EOF -feature import-marks=marks.out -feature export-marks=marks.new -EOF - -test_expect_success \ - 'R: import to output marks works without any content' \ - 'cat input | git fast-import && - test_cmp marks.out marks.new' +test_expect_success 'R: import to output marks works without any content' ' + cat >input <<-EOF && + feature import-marks=marks.out + feature export-marks=marks.new + EOF -cat >input <<EOF -feature import-marks=nonexistent.marks -feature export-marks=marks.new -EOF + cat input | git fast-import && + test_cmp marks.out marks.new +' -test_expect_success \ - 'R: import marks prefers commandline marks file over the stream' \ - 'cat input | git fast-import --import-marks=marks.out && - test_cmp marks.out marks.new' +test_expect_success 'R: import marks prefers commandline marks file over the stream' ' + cat >input <<-EOF && + feature import-marks=nonexistent.marks + feature export-marks=marks.new + EOF + cat input | git fast-import --import-marks=marks.out && + test_cmp marks.out marks.new +' -cat >input <<EOF -feature import-marks=nonexistent.marks -feature export-marks=combined.marks -EOF test_expect_success 'R: multiple --import-marks= should be honoured' ' - head -n2 marks.out > one.marks && - tail -n +3 marks.out > two.marks && - git fast-import --import-marks=one.marks --import-marks=two.marks <input && - test_cmp marks.out combined.marks -' + cat >input <<-EOF && + feature import-marks=nonexistent.marks + feature export-marks=combined.marks + EOF -cat >input <<EOF -feature relative-marks -feature import-marks=relative.in -feature export-marks=relative.out -EOF + head -n2 marks.out > one.marks && + tail -n +3 marks.out > two.marks && + git fast-import --import-marks=one.marks --import-marks=two.marks <input && + test_cmp marks.out combined.marks +' test_expect_success 'R: feature relative-marks should be honoured' ' - mkdir -p .git/info/fast-import/ && - cp marks.new .git/info/fast-import/relative.in && - git fast-import <input && - test_cmp marks.new .git/info/fast-import/relative.out -' + cat >input <<-EOF && + feature relative-marks + feature import-marks=relative.in + feature export-marks=relative.out + EOF -cat >input <<EOF -feature relative-marks -feature import-marks=relative.in -feature no-relative-marks -feature export-marks=non-relative.out -EOF + mkdir -p .git/info/fast-import/ && + cp marks.new .git/info/fast-import/relative.in && + git fast-import <input && + test_cmp marks.new .git/info/fast-import/relative.out +' test_expect_success 'R: feature no-relative-marks should be honoured' ' - git fast-import <input && - test_cmp marks.new non-relative.out + cat >input <<-EOF && + feature relative-marks + feature import-marks=relative.in + feature no-relative-marks + feature export-marks=non-relative.out + EOF + + git fast-import <input && + test_cmp marks.new non-relative.out ' test_expect_success 'R: feature ls supported' ' @@ -2330,15 +2332,28 @@ test_expect_success !MINGW 'R: in-stream cat-blob-fd not respected' ' cat-blob $blob EOF test_cmp expect actual.3 && - test_cmp empty actual.1 && + test_must_be_empty actual.1 && git fast-import 3>actual.3 >actual.1 <<-EOF && option cat-blob-fd=3 cat-blob $blob EOF - test_cmp empty actual.3 && + test_must_be_empty actual.3 && test_cmp expect actual.1 ' +test_expect_success !MINGW 'R: print mark for new blob' ' + echo "effluentish" | git hash-object --stdin >expect && + git fast-import --cat-blob-fd=6 6>actual <<-\EOF && + blob + mark :1 + data <<BLOB_END + effluentish + BLOB_END + get-mark :1 + EOF + test_cmp expect actual +' + test_expect_success !MINGW 'R: print new blob' ' blob=$(echo "yep yep yep" | git hash-object --stdin) && cat >expect <<-EOF && @@ -2449,7 +2464,7 @@ test_expect_success PIPE 'R: copy using cat-file' ' read blob_id type size <&3 && echo "$blob_id $type $size" >response && - head_c $size >blob <&3 && + test_copy_bytes $size >blob <&3 && read newline <&3 && cat <<-EOF && @@ -2492,7 +2507,7 @@ test_expect_success PIPE 'R: print blob mid-commit' ' EOF read blob_id type size <&3 && - head_c $size >actual <&3 && + test_copy_bytes $size >actual <&3 && read newline <&3 && echo @@ -2527,7 +2542,7 @@ test_expect_success PIPE 'R: print staged blob within commit' ' echo "cat-blob $to_get" && read blob_id type size <&3 && - head_c $size >actual <&3 && + test_copy_bytes $size >actual <&3 && read newline <&3 && echo deleteall @@ -2536,17 +2551,17 @@ test_expect_success PIPE 'R: print staged blob within commit' ' test_cmp expect actual ' -cat >input << EOF -option git quiet -blob -data 3 -hi +test_expect_success 'R: quiet option results in no stats being output' ' + cat >input <<-EOF && + option git quiet + blob + data 3 + hi -EOF + EOF -test_expect_success 'R: quiet option results in no stats being output' ' - cat input | git fast-import 2> output && - test_cmp empty output + cat input | git fast-import 2> output && + test_must_be_empty output ' test_expect_success 'R: feature done means terminating "done" is mandatory' ' @@ -2591,16 +2606,16 @@ test_expect_success 'R: terminating "done" within commit' ' test_cmp expect actual ' -cat >input <<EOF -option git non-existing-option -EOF - test_expect_success 'R: die on unknown option' ' - test_must_fail git fast-import <input + cat >input <<-EOF && + option git non-existing-option + EOF + + test_must_fail git fast-import <input ' test_expect_success 'R: unknown commandline options are rejected' '\ - test_must_fail git fast-import --non-existing-option < /dev/null + test_must_fail git fast-import --non-existing-option < /dev/null ' test_expect_success 'R: die on invalid option argument' ' @@ -2611,41 +2626,57 @@ test_expect_success 'R: die on invalid option argument' ' test_must_fail git fast-import --depth="5 elephants" </dev/null ' -cat >input <<EOF -option non-existing-vcs non-existing-option -EOF - test_expect_success 'R: ignore non-git options' ' - git fast-import <input + cat >input <<-EOF && + option non-existing-vcs non-existing-option + EOF + + git fast-import <input +' + +test_expect_success 'R: corrupt lines do not mess marks file' ' + rm -f io.marks && + blob=$(echo hi | git hash-object --stdin) && + cat >expect <<-EOF && + :3 0000000000000000000000000000000000000000 + :1 $blob + :2 $blob + EOF + cp expect io.marks && + test_must_fail git fast-import --import-marks=io.marks --export-marks=io.marks <<-\EOF && + + EOF + test_cmp expect io.marks ' ## ## R: very large blobs ## -blobsize=$((2*1024*1024 + 53)) -test-genrandom bar $blobsize >expect -cat >input <<INPUT_END -commit refs/heads/big-file -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -R - big file -COMMIT - -M 644 inline big1 -data $blobsize -INPUT_END -cat expect >>input -cat >>input <<INPUT_END -M 644 inline big2 -data $blobsize -INPUT_END -cat expect >>input -echo >>input - -test_expect_success \ - 'R: blob bigger than threshold' \ - 'test_create_repo R && - git --git-dir=R/.git fast-import --big-file-threshold=1 <input' +test_expect_success 'R: blob bigger than threshold' ' + blobsize=$((2*1024*1024 + 53)) && + test-genrandom bar $blobsize >expect && + cat >input <<-INPUT_END && + commit refs/heads/big-file + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + R - big file + COMMIT + + M 644 inline big1 + data $blobsize + INPUT_END + cat expect >>input && + cat >>input <<-INPUT_END && + M 644 inline big2 + data $blobsize + INPUT_END + cat expect >>input && + echo >>input && + + test_create_repo R && + git --git-dir=R/.git config fastimport.unpackLimit 0 && + git --git-dir=R/.git fast-import --big-file-threshold=1 <input +' test_expect_success 'R: verify created pack' ' ( @@ -2654,17 +2685,18 @@ test_expect_success 'R: verify created pack' ' ) ' -test_expect_success \ - 'R: verify written objects' \ - 'git --git-dir=R/.git cat-file blob big-file:big1 >actual && - test_cmp_bin expect actual && - a=$(git --git-dir=R/.git rev-parse big-file:big1) && - b=$(git --git-dir=R/.git rev-parse big-file:big2) && - test $a = $b' -test_expect_success \ - 'R: blob appears only once' \ - 'n=$(grep $a verify | wc -l) && - test 1 = $n' +test_expect_success 'R: verify written objects' ' + git --git-dir=R/.git cat-file blob big-file:big1 >actual && + test_cmp_bin expect actual && + a=$(git --git-dir=R/.git rev-parse big-file:big1) && + b=$(git --git-dir=R/.git rev-parse big-file:big2) && + test $a = $b +' + +test_expect_success 'R: blob appears only once' ' + n=$(grep $a verify | wc -l) && + test 1 = $n +' ### ### series S @@ -2697,46 +2729,46 @@ test_expect_success \ # # Invalid dataref .. # -test_tick - -cat >input <<INPUT_END -commit refs/heads/S -mark :301 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -commit 1 -COMMIT -M 100644 inline hello.c -data <<BLOB -blob 1 -BLOB - -commit refs/heads/S -mark :302 -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -commit 2 -COMMIT -from :301 -M 100644 inline hello.c -data <<BLOB -blob 2 -BLOB - -blob -mark :403 -data <<BLOB -blob 3 -BLOB - -blob -mark :202 -data <<BLOB -note 2 -BLOB -INPUT_END - test_expect_success 'S: initialize for S tests' ' + test_tick && + + cat >input <<-INPUT_END && + commit refs/heads/S + mark :301 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + commit 1 + COMMIT + M 100644 inline hello.c + data <<BLOB + blob 1 + BLOB + + commit refs/heads/S + mark :302 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + commit 2 + COMMIT + from :301 + M 100644 inline hello.c + data <<BLOB + blob 2 + BLOB + + blob + mark :403 + data <<BLOB + blob 3 + BLOB + + blob + mark :202 + data <<BLOB + note 2 + BLOB + INPUT_END + git fast-import --export-marks=marks <input ' @@ -2988,103 +3020,103 @@ test_expect_success 'T: empty reset doesnt delete branch' ' ### series U (filedelete) ### -cat >input <<INPUT_END -commit refs/heads/U -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -test setup -COMMIT -M 100644 inline hello.c -data <<BLOB -blob 1 -BLOB -M 100644 inline good/night.txt -data <<BLOB -sleep well -BLOB -M 100644 inline good/bye.txt -data <<BLOB -au revoir -BLOB - -INPUT_END - test_expect_success 'U: initialize for U tests' ' + cat >input <<-INPUT_END && + commit refs/heads/U + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + test setup + COMMIT + M 100644 inline hello.c + data <<BLOB + blob 1 + BLOB + M 100644 inline good/night.txt + data <<BLOB + sleep well + BLOB + M 100644 inline good/bye.txt + data <<BLOB + au revoir + BLOB + + INPUT_END + git fast-import <input ' -cat >input <<INPUT_END -commit refs/heads/U -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -delete good/night.txt -COMMIT -from refs/heads/U^0 -D good/night.txt +test_expect_success 'U: filedelete file succeeds' ' + cat >input <<-INPUT_END && + commit refs/heads/U + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + delete good/night.txt + COMMIT + from refs/heads/U^0 + D good/night.txt -INPUT_END + INPUT_END -test_expect_success 'U: filedelete file succeeds' ' git fast-import <input ' -cat >expect <<EOF -:100644 000000 2907ebb4bf85d91bf0716bb3bd8a68ef48d6da76 0000000000000000000000000000000000000000 D good/night.txt -EOF +test_expect_success 'U: validate file delete result' ' + cat >expect <<-EOF && + :100644 000000 2907ebb4bf85d91bf0716bb3bd8a68ef48d6da76 0000000000000000000000000000000000000000 D good/night.txt + EOF -git diff-tree -M -r U^1 U >actual + git diff-tree -M -r U^1 U >actual && -test_expect_success 'U: validate file delete result' ' compare_diff_raw expect actual ' -cat >input <<INPUT_END -commit refs/heads/U -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -delete good dir -COMMIT -from refs/heads/U^0 -D good +test_expect_success 'U: filedelete directory succeeds' ' + cat >input <<-INPUT_END && + commit refs/heads/U + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + delete good dir + COMMIT + from refs/heads/U^0 + D good -INPUT_END + INPUT_END -test_expect_success 'U: filedelete directory succeeds' ' git fast-import <input ' -cat >expect <<EOF -:100644 000000 69cb75792f55123d8389c156b0b41c2ff00ed507 0000000000000000000000000000000000000000 D good/bye.txt -EOF +test_expect_success 'U: validate directory delete result' ' + cat >expect <<-EOF && + :100644 000000 69cb75792f55123d8389c156b0b41c2ff00ed507 0000000000000000000000000000000000000000 D good/bye.txt + EOF -git diff-tree -M -r U^1 U >actual + git diff-tree -M -r U^1 U >actual && -test_expect_success 'U: validate directory delete result' ' compare_diff_raw expect actual ' -cat >input <<INPUT_END -commit refs/heads/U -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -must succeed -COMMIT -from refs/heads/U^0 -D "" +test_expect_success 'U: filedelete root succeeds' ' + cat >input <<-INPUT_END && + commit refs/heads/U + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + must succeed + COMMIT + from refs/heads/U^0 + D "" -INPUT_END + INPUT_END -test_expect_success 'U: filedelete root succeeds' ' - git fast-import <input + git fast-import <input ' -cat >expect <<EOF -:100644 000000 c18147dc648481eeb65dc5e66628429a64843327 0000000000000000000000000000000000000000 D hello.c -EOF +test_expect_success 'U: validate root delete result' ' + cat >expect <<-EOF && + :100644 000000 c18147dc648481eeb65dc5e66628429a64843327 0000000000000000000000000000000000000000 D hello.c + EOF -git diff-tree -M -r U^1 U >actual + git diff-tree -M -r U^1 U >actual && -test_expect_success 'U: validate root delete result' ' compare_diff_raw expect actual ' diff --git a/t/t9301-fast-import-notes.sh b/t/t9301-fast-import-notes.sh index 83acf68bc3..dadc70b7d5 100755 --- a/t/t9301-fast-import-notes.sh +++ b/t/t9301-fast-import-notes.sh @@ -483,6 +483,48 @@ test_expect_success 'verify that lots of notes trigger a fanout scheme' ' ' +# Create another notes tree from the one above +SP=" " +cat >>input <<INPUT_END +commit refs/heads/other_commits +committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE +data <<COMMIT +commit #$(($num_commit + 1)) +COMMIT + +from refs/heads/many_commits +M 644 inline file +data <<EOF +file contents in commit #$(($num_commit + 1)) +EOF + +commit refs/notes/other_notes +committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE +data <<COMMIT +committing one more note on a tree imported from a previous notes tree +COMMIT + +M 040000 $(git log --no-walk --format=%T refs/notes/many_notes)$SP +N inline :$(($num_commit + 1)) +data <<EOF +note for commit #$(($num_commit + 1)) +EOF +INPUT_END + +test_expect_success 'verify that importing a notes tree respects the fanout scheme' ' + git fast-import <input && + + # None of the entries in the top-level notes tree should be a full SHA1 + git ls-tree --name-only refs/notes/other_notes | + while read path + do + if test $(expr length "$path") -ge 40 + then + return 1 + fi + done +' + cat >>expect_non-note1 << EOF This is not a note, but rather a regular file residing in a notes tree EOF diff --git a/t/t9302-fast-import-unpack-limit.sh b/t/t9302-fast-import-unpack-limit.sh new file mode 100755 index 0000000000..a04de14677 --- /dev/null +++ b/t/t9302-fast-import-unpack-limit.sh @@ -0,0 +1,105 @@ +#!/bin/sh +test_description='test git fast-import unpack limit' +. ./test-lib.sh + +test_expect_success 'create loose objects on import' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/master + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + initial + COMMIT + + done + INPUT_END + + git -c fastimport.unpackLimit=2 fast-import --done <input && + git fsck --no-progress && + test $(find .git/objects/?? -type f | wc -l) -eq 2 && + test $(find .git/objects/pack -type f | wc -l) -eq 0 +' + +test_expect_success 'bigger packs are preserved' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/master + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + incremental should create a pack + COMMIT + from refs/heads/master^0 + + commit refs/heads/branch + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + branch + COMMIT + + done + INPUT_END + + git -c fastimport.unpackLimit=2 fast-import --done <input && + git fsck --no-progress && + test $(find .git/objects/?? -type f | wc -l) -eq 2 && + test $(find .git/objects/pack -type f | wc -l) -eq 2 +' + +test_expect_success 'lookups after checkpoint works' ' + hello_id=$(echo hello | git hash-object --stdin -t blob) && + id="$GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE" && + before=$(git rev-parse refs/heads/master^0) && + ( + cat <<-INPUT_END && + blob + mark :1 + data 6 + hello + + commit refs/heads/master + mark :2 + committer $id + data <<COMMIT + checkpoint after this + COMMIT + from refs/heads/master^0 + M 100644 :1 hello + + # pre-checkpoint + cat-blob :1 + cat-blob $hello_id + checkpoint + # post-checkpoint + cat-blob :1 + cat-blob $hello_id + INPUT_END + + n=0 && + from=$before && + while test x"$from" = x"$before" + do + if test $n -gt 30 + then + echo >&2 "checkpoint did not update branch" + exit 1 + else + n=$(($n + 1)) + fi && + sleep 1 && + from=$(git rev-parse refs/heads/master^0) + done && + cat <<-INPUT_END && + commit refs/heads/master + committer $id + data <<COMMIT + make sure from "unpacked sha1 reference" works, too + COMMIT + from $from + INPUT_END + echo done + ) | git -c fastimport.unpackLimit=100 fast-import --done && + test $(find .git/objects/?? -type f | wc -l) -eq 6 && + test $(find .git/objects/pack -type f | wc -l) -eq 2 +' + +test_done diff --git a/t/t9303-fast-import-compression.sh b/t/t9303-fast-import-compression.sh new file mode 100755 index 0000000000..856219f46a --- /dev/null +++ b/t/t9303-fast-import-compression.sh @@ -0,0 +1,67 @@ +#!/bin/sh + +test_description='compression setting of fast-import utility' +. ./test-lib.sh + +# This should be moved to test-lib.sh together with the +# copy in t0021 after both topics have graduated to 'master'. +file_size () { + perl -e 'print -s $ARGV[0]' "$1" +} + +import_large () { + ( + echo blob + echo "data <<EOD" + printf "%2000000s\n" "$*" + echo EOD + ) | git "$@" fast-import +} + +while read expect config +do + test_expect_success "fast-import (packed) with $config" ' + test_when_finished "rm -f .git/objects/pack/pack-*.*" && + test_when_finished "rm -rf .git/objects/??" && + import_large -c fastimport.unpacklimit=0 $config && + sz=$(file_size .git/objects/pack/pack-*.pack) && + case "$expect" in + small) test "$sz" -le 100000 ;; + large) test "$sz" -ge 100000 ;; + esac + ' +done <<\EOF +large -c core.compression=0 +small -c core.compression=9 +large -c core.compression=0 -c pack.compression=0 +large -c core.compression=9 -c pack.compression=0 +small -c core.compression=0 -c pack.compression=9 +small -c core.compression=9 -c pack.compression=9 +large -c pack.compression=0 +small -c pack.compression=9 +EOF + +while read expect config +do + test_expect_success "fast-import (loose) with $config" ' + test_when_finished "rm -f .git/objects/pack/pack-*.*" && + test_when_finished "rm -rf .git/objects/??" && + import_large -c fastimport.unpacklimit=9 $config && + sz=$(file_size .git/objects/??/????*) && + case "$expect" in + small) test "$sz" -le 100000 ;; + large) test "$sz" -ge 100000 ;; + esac + ' +done <<\EOF +large -c core.compression=0 +small -c core.compression=9 +large -c core.compression=0 -c core.loosecompression=0 +large -c core.compression=9 -c core.loosecompression=0 +small -c core.compression=0 -c core.loosecompression=9 +small -c core.compression=9 -c core.loosecompression=9 +large -c core.loosecompression=0 +small -c core.loosecompression=9 +EOF + +test_done diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 66c8b0a371..b5149fde6e 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -163,7 +163,7 @@ test_expect_success 'setup submodule' ' git add file && git commit -m sub_initial ) && - git submodule add "`pwd`/sub" sub && + git submodule add "$(pwd)/sub" sub && git commit -m initial && test_tick && ( @@ -377,7 +377,7 @@ test_expect_success 'full-tree re-shows unmodified files' ' test_expect_success 'set-up a few more tags for tag export tests' ' git checkout -f master && - HEAD_TREE=`git show -s --pretty=raw HEAD | grep tree | sed "s/tree //"` && + HEAD_TREE=$(git show -s --pretty=raw HEAD | grep tree | sed "s/tree //") && git tag tree_tag -m "tagging a tree" $HEAD_TREE && git tag -a tree_tag-obj -m "tagging a tree" $HEAD_TREE && git tag tag-obj_tag -m "tagging a tag" tree_tag-obj && @@ -422,7 +422,7 @@ test_expect_success 'directory becomes symlink' ' test_expect_success 'fast-export quotes pathnames' ' git init crazy-paths && (cd crazy-paths && - blob=`echo foo | git hash-object -w --stdin` && + blob=$(echo foo | git hash-object -w --stdin) && git update-index --add \ --cacheinfo 100644 $blob "$(printf "path with\\nnewline")" \ --cacheinfo 100644 $blob "path with \"quote\"" \ diff --git a/t/t9400-git-cvsserver-server.sh b/t/t9400-git-cvsserver-server.sh index 6146c3fec2..432c61d246 100755 --- a/t/t9400-git-cvsserver-server.sh +++ b/t/t9400-git-cvsserver-server.sh @@ -25,11 +25,11 @@ perl -e 'use DBI; use DBD::SQLite' >/dev/null 2>&1 || { test_done } -WORKDIR=$(pwd) -SERVERDIR=$(pwd)/gitcvs.git +WORKDIR=$PWD +SERVERDIR=$PWD/gitcvs.git git_config="$SERVERDIR/config" CVSROOT=":fork:$SERVERDIR" -CVSWORK="$(pwd)/cvswork" +CVSWORK="$PWD/cvswork" CVS_SERVER=git-cvsserver export CVSROOT CVS_SERVER @@ -45,7 +45,8 @@ test_expect_success 'setup' ' touch secondrootfile && git add secondrootfile && git commit -m "second root") && - git pull secondroot master && + git fetch secondroot master && + git merge --allow-unrelated-histories FETCH_HEAD && git clone -q --bare "$WORKDIR/.git" "$SERVERDIR" >/dev/null 2>&1 && GIT_DIR="$SERVERDIR" git config --bool gitcvs.enabled true && GIT_DIR="$SERVERDIR" git config gitcvs.logfile "$SERVERDIR/gitcvs.log" && diff --git a/t/t9401-git-cvsserver-crlf.sh b/t/t9401-git-cvsserver-crlf.sh index 5a4ed28e49..84787eee9a 100755 --- a/t/t9401-git-cvsserver-crlf.sh +++ b/t/t9401-git-cvsserver-crlf.sh @@ -74,11 +74,11 @@ perl -e 'use DBI; use DBD::SQLite' >/dev/null 2>&1 || { } unset GIT_DIR GIT_CONFIG -WORKDIR=$(pwd) -SERVERDIR=$(pwd)/gitcvs.git +WORKDIR=$PWD +SERVERDIR=$PWD/gitcvs.git git_config="$SERVERDIR/config" CVSROOT=":fork:$SERVERDIR" -CVSWORK="$(pwd)/cvswork" +CVSWORK="$PWD/cvswork" CVS_SERVER=git-cvsserver export CVSROOT CVS_SERVER @@ -154,7 +154,7 @@ test_expect_success 'adding files' ' echo "more text" > src.c && GIT_CONFIG="$git_config" cvs -Q add src.c >cvs.log 2>&1 && marked_as . src.c "" && - echo "psuedo-binary" > temp.bin + echo "pseudo-binary" > temp.bin ) && GIT_CONFIG="$git_config" cvs -Q add subdir/temp.bin >cvs.log 2>&1 && marked_as subdir temp.bin "-kb" && diff --git a/t/t9402-git-cvsserver-refs.sh b/t/t9402-git-cvsserver-refs.sh index d00df08731..6d2d3c8739 100755 --- a/t/t9402-git-cvsserver-refs.sh +++ b/t/t9402-git-cvsserver-refs.sh @@ -82,11 +82,11 @@ perl -e 'use DBI; use DBD::SQLite' >/dev/null 2>&1 || { } unset GIT_DIR GIT_CONFIG -WORKDIR=$(pwd) -SERVERDIR=$(pwd)/gitcvs.git +WORKDIR=$PWD +SERVERDIR=$PWD/gitcvs.git git_config="$SERVERDIR/config" CVSROOT=":fork:$SERVERDIR" -CVSWORK="$(pwd)/cvswork" +CVSWORK="$PWD/cvswork" CVS_SERVER=git-cvsserver export CVSROOT CVS_SERVER diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index e94b2f147a..6d06ed96cb 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -709,6 +709,14 @@ test_expect_success HIGHLIGHT \ git commit -m "Add test.sh" && gitweb_run "p=.git;a=blob;f=test.sh"' +test_expect_success HIGHLIGHT \ + 'syntax highlighting (highlighter language autodetection)' \ + 'git config gitweb.highlight yes && + echo "#!/usr/bin/perl" > test && + git add test && + git commit -m "Add test" && + gitweb_run "p=.git;a=blob;f=test"' + # ---------------------------------------------------------------------- # forks of projects diff --git a/t/t9501-gitweb-standalone-http-status.sh b/t/t9501-gitweb-standalone-http-status.sh index d3a5bac754..2a0ffed870 100755 --- a/t/t9501-gitweb-standalone-http-status.sh +++ b/t/t9501-gitweb-standalone-http-status.sh @@ -100,14 +100,14 @@ test_expect_success 'snapshots: bad tree-ish id (tagged object)' ' echo object > tag-object && git add tag-object && test_tick && git commit -m "Object to be tagged" && - git tag tagged-object `git hash-object tag-object` && + git tag tagged-object $(git hash-object tag-object) && gitweb_run "p=.git;a=snapshot;h=tagged-object;sf=tgz" && grep "400 - Object is not a tree-ish" gitweb.output ' test_debug 'cat gitweb.output' test_expect_success 'snapshots: good object id' ' - ID=`git rev-parse --verify HEAD` && + ID=$(git rev-parse --verify HEAD) && gitweb_run "p=.git;a=snapshot;h=$ID;sf=tgz" && grep "Status: 200 OK" gitweb.output ' @@ -173,7 +173,7 @@ test_expect_success DATE_PARSER 'modification: snapshot if-modified-since (unmod test_debug 'cat gitweb.headers' test_expect_success DATE_PARSER 'modification: tree snapshot' ' - ID=`git rev-parse --verify HEAD^{tree}` && + ID=$(git rev-parse --verify HEAD^{tree}) && HTTP_IF_MODIFIED_SINCE="Wed, 6 Apr 2005 22:14:13 +0000" && export HTTP_IF_MODIFIED_SINCE && test_when_finished "unset HTTP_IF_MODIFIED_SINCE" && diff --git a/t/t9700/test.pl b/t/t9700/test.pl index 1140767b50..1b75c91965 100755 --- a/t/t9700/test.pl +++ b/t/t9700/test.pl @@ -17,6 +17,12 @@ BEGIN { use Cwd; use File::Basename; +sub adjust_dirsep { + my $path = shift; + $path =~ s{\\}{/}g; + return $path; +} + BEGIN { use_ok('Git') } # set up @@ -33,7 +39,7 @@ is($r->config_int("test.int"), 2048, "config_int: integer"); is($r->config_int("test.nonexistent"), undef, "config_int: nonexistent"); ok($r->config_bool("test.booltrue"), "config_bool: true"); ok(!$r->config_bool("test.boolfalse"), "config_bool: false"); -is($r->config_path("test.path"), $r->config("test.pathexpanded"), +is(adjust_dirsep($r->config_path("test.path")), $r->config("test.pathexpanded"), "config_path: ~/foo expansion"); is_deeply([$r->config_path("test.pathmulti")], ["foo", "bar"], "config_path: multiple values"); diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 5b562122a1..4849edc4ef 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -131,6 +131,64 @@ test_expect_success 'clone two dirs, @all, conflicting files' ' ) ' +test_expect_success 'clone two dirs, each edited by submit, single git commit' ' + ( + cd "$cli" && + echo sub1/f4 >sub1/f4 && + p4 add sub1/f4 && + echo sub2/f4 >sub2/f4 && + p4 add sub2/f4 && + p4 submit -d "sub1/f4 and sub2/f4" + ) && + git p4 clone --dest="$git" //depot/sub1@all //depot/sub2@all && + test_when_finished cleanup_git && + ( + cd "$git" && + git ls-files >lines && + test_line_count = 4 lines && + git log --oneline p4/master >lines && + test_line_count = 5 lines + ) +' + +revision_ranges="2000/01/01,#head \ + 1,2080/01/01 \ + 2000/01/01,2080/01/01 \ + 2000/01/01,1000 \ + 1,1000" + +test_expect_success 'clone using non-numeric revision ranges' ' + test_when_finished cleanup_git && + for r in $revision_ranges + do + rm -fr "$git" && + test ! -d "$git" && + git p4 clone --dest="$git" //depot@$r && + ( + cd "$git" && + git ls-files >lines && + test_line_count = 8 lines + ) + done +' + +test_expect_success 'clone with date range, excluding some changes' ' + test_when_finished cleanup_git && + before=$(date +%Y/%m/%d:%H:%M:%S) && + sleep 2 && + ( + cd "$cli" && + :>date_range_test && + p4 add date_range_test && + p4 submit -d "Adding file" + ) && + git p4 clone --dest="$git" //depot@1,$before && + ( + cd "$git" && + test_path_is_missing date_range_test + ) +' + test_expect_success 'exit when p4 fails to produce marshaled output' ' mkdir badp4dir && test_when_finished "rm badp4dir/p4 && rmdir badp4dir" && @@ -203,6 +261,42 @@ test_expect_success 'unresolvable host in P4PORT should display error' ' ) ' +test_expect_success 'submit from detached head' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + git checkout p4/master && + >detached_head_test && + git add detached_head_test && + git commit -m "add detached_head" && + git config git-p4.skipSubmitEdit true && + git p4 submit && + git p4 rebase && + git log p4/master | grep detached_head + ) +' + +test_expect_success 'submit from worktree' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + git worktree add ../worktree-test + ) && + ( + cd "$git/../worktree-test" && + test_commit "worktree-commit" && + git config git-p4.skipSubmitEdit true && + git p4 submit + ) && + ( + cd "$cli" && + p4 sync && + test_path_is_file worktree-commit.t + ) +' + test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9801-git-p4-branch.sh b/t/t9801-git-p4-branch.sh index 0aafd03334..6a86d6996b 100755 --- a/t/t9801-git-p4-branch.sh +++ b/t/t9801-git-p4-branch.sh @@ -300,7 +300,7 @@ test_expect_success 'git p4 clone complex branches' ' test_path_is_file file2 && test_path_is_file file3 && ! grep update file2 && - test_path_is_missing .git/git-p4-tmp + test_must_fail git show-ref --verify refs/git-p4-tmp ) ' @@ -352,7 +352,7 @@ test_expect_success 'git p4 sync changes to two branches in the same changelist' test_path_is_file file2 && test_path_is_file file3 && ! grep update file2 && - test_path_is_missing .git/git-p4-tmp + test_must_fail git show-ref --verify refs/git-p4-tmp ) ' diff --git a/t/t9802-git-p4-filetype.sh b/t/t9802-git-p4-filetype.sh index 66d3fc91a7..eb9a8ed197 100755 --- a/t/t9802-git-p4-filetype.sh +++ b/t/t9802-git-p4-filetype.sh @@ -223,12 +223,12 @@ build_gendouble() { import sys import struct - s = struct.pack(">LL18s", + s = struct.pack(b">LL18s", 0x00051607, # AppleDouble 0x00020000, # version 2 - "" # pad to 26 bytes + b"" # pad to 26 bytes ) - sys.stdout.write(s) + getattr(sys.stdout, 'buffer', sys.stdout).write(s) EOF } diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh index 254d428b73..1ab76c4246 100755 --- a/t/t9806-git-p4-options.sh +++ b/t/t9806-git-p4-options.sh @@ -269,6 +269,38 @@ test_expect_success 'submit works with two branches' ' ) ' +test_expect_success 'use --git-dir option and GIT_DIR' ' + test_when_finished cleanup_git && + git p4 clone //depot --destination="$git" && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + test_commit first-change && + git p4 submit --git-dir "$git" + ) && + ( + cd "$cli" && + p4 sync && + test_path_is_file first-change.t && + echo "cli_file" >cli_file.t && + p4 add cli_file.t && + p4 submit -d "cli change" + ) && + (git --git-dir "$git" p4 sync) && + (cd "$git" && git checkout -q p4/master) && + test_path_is_file "$git"/cli_file.t && + ( + cd "$cli" && + echo "cli_file2" >cli_file2.t && + p4 add cli_file2.t && + p4 submit -d "cli change2" + ) && + (GIT_DIR="$git" git p4 sync) && + (cd "$git" && git checkout -q p4/master) && + test_path_is_file "$git"/cli_file2.t +' + + test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 1f74a88385..e37239e657 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -389,7 +389,7 @@ test_expect_success 'description with Jobs section and bogus following text' ' ( cd "$cli" && p4 revert desc6 && - rm desc6 + rm -f desc6 ) ' @@ -413,6 +413,75 @@ test_expect_success 'submit --prepare-p4-only' ' ) ' +test_expect_success 'submit --shelve' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$cli" && + p4 revert ... && + cd "$git" && + git config git-p4.skipSubmitEdit true && + test_commit "shelveme1" && + git p4 submit --origin=HEAD^ && + + echo 654321 >shelveme2.t && + echo 123456 >>shelveme1.t && + git add shelveme* && + git commit -m"shelvetest" && + git p4 submit --shelve --origin=HEAD^ && + + test_path_is_file shelveme1.t && + test_path_is_file shelveme2.t + ) && + ( + cd "$cli" && + change=$(p4 -G changes -s shelved -m 1 //depot/... | \ + marshal_dump change) && + p4 describe -S $change | grep shelveme2 && + p4 describe -S $change | grep 123456 && + test_path_is_file shelveme1.t && + test_path_is_missing shelveme2.t + ) +' + +# Update an existing shelved changelist + +test_expect_success 'submit --update-shelve' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$cli" && + p4 revert ... && + cd "$git" && + git config git-p4.skipSubmitEdit true && + test_commit "test-update-shelved-change" && + git p4 submit --origin=HEAD^ --shelve && + + shelf_cl=$(p4 -G changes -s shelved -m 1 |\ + marshal_dump change) && + test -n $shelf_cl && + echo "updating shelved change list $shelf_cl" && + + echo "updated-line" >>shelf.t && + echo added-file.t >added-file.t && + git add shelf.t added-file.t && + git rm -f test-update-shelved-change.t && + git commit --amend -C HEAD && + git show --stat HEAD && + git p4 submit -v --origin HEAD^ --update-shelve $shelf_cl && + echo "done git p4 submit" + ) && + ( + cd "$cli" && + change=$(p4 -G changes -s shelved -m 1 //depot/... | \ + marshal_dump change) && + p4 unshelve -c $change -s $change && + grep -q updated-line shelf.t && + p4 describe -S $change | grep added-file.t && + test_path_is_missing test-update-shelved-change.t + ) +' + test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9811-git-p4-label-import.sh b/t/t9811-git-p4-label-import.sh index 095238fffe..decb66ba30 100755 --- a/t/t9811-git-p4-label-import.sh +++ b/t/t9811-git-p4-label-import.sh @@ -214,6 +214,51 @@ test_expect_success 'use git config to enable import/export of tags' ' ) ' +p4_head_revision() { + p4 changes -m 1 "$@" | awk '{print $2}' +} + +# Importing a label that references a P4 commit that +# has not been seen. The presence of a label on a commit +# we haven't seen should not cause git-p4 to fail. It should +# merely skip that label, and still import other labels. +test_expect_success 'importing labels with missing revisions' ' + test_when_finished cleanup_git && + ( + rm -fr "$cli" "$git" && + mkdir "$cli" && + P4CLIENT=missing-revision && + client_view "//depot/missing-revision/... //missing-revision/..." && + cd "$cli" && + >f1 && p4 add f1 && p4 submit -d "start" && + + p4 tag -l TAG_S0 ... && + + >f2 && p4 add f2 && p4 submit -d "second" && + + startrev=$(p4_head_revision //depot/missing-revision/...) && + + >f3 && p4 add f3 && p4 submit -d "third" && + + p4 edit f2 && date >f2 && p4 submit -d "change" f2 && + + endrev=$(p4_head_revision //depot/missing-revision/...) && + + p4 tag -l TAG_S1 ... && + + # we should skip TAG_S0 since it is before our startpoint, + # but pick up TAG_S1. + + git p4 clone --dest="$git" --import-labels -v \ + //depot/missing-revision/...@$startrev,$endrev && + ( + cd "$git" && + git rev-parse TAG_S1 && + ! git rev-parse TAG_S0 + ) + ) +' + test_expect_success 'kill p4d' ' kill_p4d diff --git a/t/t9813-git-p4-preserve-users.sh b/t/t9813-git-p4-preserve-users.sh index 0fe2312807..bda222aa02 100755 --- a/t/t9813-git-p4-preserve-users.sh +++ b/t/t9813-git-p4-preserve-users.sh @@ -118,21 +118,21 @@ test_expect_success 'not preserving user with mixed authorship' ' make_change_by_user usernamefile3 Derek derek@example.com && P4EDITOR=cat P4USER=alice P4PASSWD=secret && export P4EDITOR P4USER P4PASSWD && - git p4 commit |\ - grep "git author derek@example.com does not match" && + git p4 commit >actual && + grep "git author derek@example.com does not match" actual && make_change_by_user usernamefile3 Charlie charlie@example.com && - git p4 commit |\ - grep "git author charlie@example.com does not match" && + git p4 commit >actual && + grep "git author charlie@example.com does not match" actual && make_change_by_user usernamefile3 alice alice@example.com && - git p4 commit |\ - test_must_fail grep "git author.*does not match" && + git p4 commit >actual && + ! grep "git author.*does not match" actual && git config git-p4.skipUserNameCheck true && make_change_by_user usernamefile3 Charlie charlie@example.com && - git p4 commit |\ - test_must_fail grep "git author.*does not match" && + git p4 commit >actual && + ! grep "git author.*does not match" actual && p4_check_commit_author usernamefile3 alice ) diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh index c89992cf95..e7e0268e98 100755 --- a/t/t9814-git-p4-rename.sh +++ b/t/t9814-git-p4-rename.sh @@ -141,7 +141,7 @@ test_expect_success 'detect copies' ' git diff-tree -r -C HEAD && git p4 submit && p4 filelog //depot/file8 && - p4 filelog //depot/file8 | test_must_fail grep -q "branch from" && + ! p4 filelog //depot/file8 | grep -q "branch from" && echo "file9" >>file2 && git commit -a -m "Differentiate file2" && @@ -154,7 +154,7 @@ test_expect_success 'detect copies' ' git config git-p4.detectCopies true && git p4 submit && p4 filelog //depot/file9 && - p4 filelog //depot/file9 | test_must_fail grep -q "branch from" && + ! p4 filelog //depot/file9 | grep -q "branch from" && echo "file10" >>file2 && git commit -a -m "Differentiate file2" && @@ -202,7 +202,7 @@ test_expect_success 'detect copies' ' git config git-p4.detectCopies $(($level + 2)) && git p4 submit && p4 filelog //depot/file12 && - p4 filelog //depot/file12 | test_must_fail grep -q "branch from" && + ! p4 filelog //depot/file12 | grep -q "branch from" && echo "file13" >>file2 && git commit -a -m "Differentiate file2" && diff --git a/t/t9815-git-p4-submit-fail.sh b/t/t9815-git-p4-submit-fail.sh index 4cff6a760f..37b42d03a2 100755 --- a/t/t9815-git-p4-submit-fail.sh +++ b/t/t9815-git-p4-submit-fail.sh @@ -417,11 +417,8 @@ test_expect_success 'cleanup chmod after submit cancel' ' ! p4 fstat -T action text && test_path_is_file text+x && ! p4 fstat -T action text+x && - if test_have_prereq !CYGWIN - then - stat --format=%A text | egrep ^-r-- && - stat --format=%A text+x | egrep ^-r-x - fi + ls -l text | egrep ^-r-- && + ls -l text+x | egrep ^-r-x ) ' diff --git a/t/t9818-git-p4-block.sh b/t/t9818-git-p4-block.sh index 153b20afbd..8840a183ac 100755 --- a/t/t9818-git-p4-block.sh +++ b/t/t9818-git-p4-block.sh @@ -8,18 +8,34 @@ test_expect_success 'start p4d' ' start_p4d ' -test_expect_success 'Create a repo with ~100 changes' ' +create_restricted_group() { + p4 group -i <<-EOF + Group: restricted + MaxResults: 7 + MaxScanRows: 40 + Users: author + EOF +} + +test_expect_success 'Create group with limited maxrows' ' + create_restricted_group +' + +test_expect_success 'Create a repo with many changes' ' ( - cd "$cli" && + client_view "//depot/included/... //client/included/..." \ + "//depot/excluded/... //client/excluded/..." && + mkdir -p "$cli/included" "$cli/excluded" && + cd "$cli/included" && >file.txt && p4 add file.txt && p4 submit -d "Add file.txt" && - for i in $(test_seq 0 9) + for i in $(test_seq 0 5) do >outer$i.txt && p4 add outer$i.txt && p4 submit -d "Adding outer$i.txt" && - for j in $(test_seq 0 9) + for j in $(test_seq 0 5) do p4 edit file.txt && echo $i$j >file.txt && @@ -29,34 +45,99 @@ test_expect_success 'Create a repo with ~100 changes' ' ) ' +test_expect_success 'Default user cannot fetch changes' ' + ! p4 changes -m 1 //depot/... +' + test_expect_success 'Clone the repo' ' - git p4 clone --dest="$git" --changes-block-size=10 --verbose //depot@all + git p4 clone --dest="$git" --changes-block-size=7 --verbose //depot/included@all ' test_expect_success 'All files are present' ' echo file.txt >expected && test_write_lines outer0.txt outer1.txt outer2.txt outer3.txt outer4.txt >>expected && - test_write_lines outer5.txt outer6.txt outer7.txt outer8.txt outer9.txt >>expected && + test_write_lines outer5.txt >>expected && ls "$git" >current && test_cmp expected current ' test_expect_success 'file.txt is correct' ' - echo 99 >expected && + echo 55 >expected && test_cmp expected "$git/file.txt" ' test_expect_success 'Correct number of commits' ' (cd "$git" && git log --oneline) >log && - test_line_count = 111 log + wc -l log && + test_line_count = 43 log ' test_expect_success 'Previous version of file.txt is correct' ' (cd "$git" && git checkout HEAD^^) && - echo 97 >expected && + echo 53 >expected && test_cmp expected "$git/file.txt" ' +# Test git-p4 sync, with some files outside the client specification. + +p4_add_file() { + (cd "$cli" && + >$1 && + p4 add $1 && + p4 submit -d "Added file $1" $1 + ) +} + +test_expect_success 'Add some more files' ' + for i in $(test_seq 0 10) + do + p4_add_file "included/x$i" && + p4_add_file "excluded/x$i" + done && + for i in $(test_seq 0 10) + do + p4_add_file "excluded/y$i" + done +' + +# This should pick up the 10 new files in "included", but not be confused +# by the additional files in "excluded" +test_expect_success 'Syncing files' ' + ( + cd "$git" && + git p4 sync --changes-block-size=7 && + git checkout p4/master && + ls -l x* > log && + test_line_count = 11 log + ) +' + +# Handling of multiple depot paths: +# git p4 clone //depot/pathA //depot/pathB +# +test_expect_success 'Create a repo with multiple depot paths' ' + client_view "//depot/pathA/... //client/pathA/..." \ + "//depot/pathB/... //client/pathB/..." && + mkdir -p "$cli/pathA" "$cli/pathB" && + for p in pathA pathB + do + for i in $(test_seq 1 10) + do + p4_add_file "$p/file$p$i" + done + done +' + +test_expect_success 'Clone repo with multiple depot paths' ' + ( + cd "$git" && + git p4 clone --changes-block-size=4 //depot/pathA@all //depot/pathB@all \ + --destination=dest && + ls -1 dest >log && + test_line_count = 20 log + ) +' + test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9819-git-p4-case-folding.sh b/t/t9819-git-p4-case-folding.sh index 78f1d0f92d..d808c008c1 100755 --- a/t/t9819-git-p4-case-folding.sh +++ b/t/t9819-git-p4-case-folding.sh @@ -4,6 +4,12 @@ test_description='interaction with P4 case-folding' . ./lib-git-p4.sh +if test_have_prereq CASE_INSENSITIVE_FS +then + skip_all='skipping P4 case-folding tests; case insensitive file system detected' + test_done +fi + test_expect_success 'start p4d with case folding enabled' ' start_p4d -C1 ' diff --git a/t/t9821-git-p4-path-variations.sh b/t/t9821-git-p4-path-variations.sh new file mode 100755 index 0000000000..81e46acfa8 --- /dev/null +++ b/t/t9821-git-p4-path-variations.sh @@ -0,0 +1,200 @@ +#!/bin/sh + +test_description='Clone repositories with path case variations' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d with case folding enabled' ' + start_p4d -C1 +' + +test_expect_success 'Create a repo with path case variations' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + + mkdir -p Path/to && + >Path/to/File2.txt && + p4 add Path/to/File2.txt && + p4 submit -d "Add file2" && + rm -rf Path && + + mkdir -p path/TO && + >path/TO/file1.txt && + p4 add path/TO/file1.txt && + p4 submit -d "Add file1" && + rm -rf path && + + mkdir -p path/to && + >path/to/file3.txt && + p4 add path/to/file3.txt && + p4 submit -d "Add file3" && + rm -rf path && + + mkdir -p x-outside-spec && + >x-outside-spec/file4.txt && + p4 add x-outside-spec/file4.txt && + p4 submit -d "Add file4" && + rm -rf x-outside-spec + ) +' + +test_expect_success 'Clone root' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config core.ignorecase false && + git p4 clone --use-client-spec --destination="$git" //depot && + # This method is used instead of "test -f" to ensure the case is + # checked even if the test is executed on case-insensitive file systems. + # All files are there as expected although the path cases look random. + cat >expect <<-\EOF && + Path/to/File2.txt + path/TO/file1.txt + path/to/file3.txt + x-outside-spec/file4.txt + EOF + git ls-files >actual && + test_cmp expect actual + ) +' + +test_expect_success 'Clone root (ignorecase)' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config core.ignorecase true && + git p4 clone --use-client-spec --destination="$git" //depot && + # This method is used instead of "test -f" to ensure the case is + # checked even if the test is executed on case-insensitive file systems. + # All files are there as expected although the path cases look random. + cat >expect <<-\EOF && + path/TO/File2.txt + path/TO/file1.txt + path/TO/file3.txt + x-outside-spec/file4.txt + EOF + git ls-files >actual && + test_cmp expect actual + ) +' + +test_expect_success 'Clone root and ignore one file' ' + client_view \ + "//depot/... //client/..." \ + "-//depot/path/TO/file1.txt //client/path/TO/file1.txt" && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config core.ignorecase false && + git p4 clone --use-client-spec --destination="$git" //depot && + # We ignore one file in the client spec and all path cases change from + # "TO" to "to"! + cat >expect <<-\EOF && + Path/to/File2.txt + path/to/file3.txt + x-outside-spec/file4.txt + EOF + git ls-files >actual && + test_cmp expect actual + ) +' + +test_expect_success 'Clone root and ignore one file (ignorecase)' ' + client_view \ + "//depot/... //client/..." \ + "-//depot/path/TO/file1.txt //client/path/TO/file1.txt" && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config core.ignorecase true && + git p4 clone --use-client-spec --destination="$git" //depot && + # We ignore one file in the client spec and all path cases change from + # "TO" to "to"! + cat >expect <<-\EOF && + Path/to/File2.txt + Path/to/file3.txt + x-outside-spec/file4.txt + EOF + git ls-files >actual && + test_cmp expect actual + ) +' + +test_expect_success 'Clone path' ' + client_view "//depot/Path/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config core.ignorecase false && + git p4 clone --use-client-spec --destination="$git" //depot && + cat >expect <<-\EOF && + to/File2.txt + EOF + git ls-files >actual && + test_cmp expect actual + ) +' + +test_expect_success 'Clone path (ignorecase)' ' + client_view "//depot/Path/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config core.ignorecase true && + git p4 clone --use-client-spec --destination="$git" //depot && + cat >expect <<-\EOF && + TO/File2.txt + TO/file1.txt + TO/file3.txt + EOF + git ls-files >actual && + test_cmp expect actual + ) +' + +# It looks like P4 determines the path case based on the first file in +# lexicographical order. Please note the lower case "to" directory for all +# files triggered through the addition of "File0.txt". +test_expect_success 'Add a new file and clone path with new file (ignorecase)' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + mkdir -p Path/to && + >Path/to/File0.txt && + p4 add Path/to/File0.txt && + p4 submit -d "Add file" && + rm -rf Path + ) && + + client_view "//depot/Path/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config core.ignorecase true && + git p4 clone --use-client-spec --destination="$git" //depot && + cat >expect <<-\EOF && + to/File0.txt + to/File2.txt + to/file1.txt + to/file3.txt + EOF + git ls-files >actual && + test_cmp expect actual + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9822-git-p4-path-encoding.sh b/t/t9822-git-p4-path-encoding.sh new file mode 100755 index 0000000000..7b83e696a9 --- /dev/null +++ b/t/t9822-git-p4-path-encoding.sh @@ -0,0 +1,58 @@ +#!/bin/sh + +test_description='Clone repositories with non ASCII paths' + +. ./lib-git-p4.sh + +UTF8_ESCAPED="a-\303\244_o-\303\266_u-\303\274.txt" +ISO8859_ESCAPED="a-\344_o-\366_u-\374.txt" + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'Create a repo containing iso8859-1 encoded paths' ' + ( + cd "$cli" && + ISO8859="$(printf "$ISO8859_ESCAPED")" && + echo content123 >"$ISO8859" && + p4 add "$ISO8859" && + p4 submit -d "test commit" + ) +' + +test_expect_failure 'Clone auto-detects depot with iso8859-1 paths' ' + git p4 clone --destination="$git" //depot && + test_when_finished cleanup_git && + ( + cd "$git" && + UTF8="$(printf "$UTF8_ESCAPED")" && + echo "$UTF8" >expect && + git -c core.quotepath=false ls-files >actual && + test_cmp expect actual + ) +' + +test_expect_success 'Clone repo containing iso8859-1 encoded paths with git-p4.pathEncoding' ' + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.pathEncoding iso8859-1 && + git p4 clone --use-client-spec --destination="$git" //depot && + UTF8="$(printf "$UTF8_ESCAPED")" && + echo "$UTF8" >expect && + git -c core.quotepath=false ls-files >actual && + test_cmp expect actual && + + echo content123 >expect && + cat "$UTF8" >actual && + test_cmp expect actual + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9823-git-p4-mock-lfs.sh b/t/t9823-git-p4-mock-lfs.sh new file mode 100755 index 0000000000..1f2dc369bf --- /dev/null +++ b/t/t9823-git-p4-mock-lfs.sh @@ -0,0 +1,192 @@ +#!/bin/sh + +test_description='Clone repositories and store files in Mock LFS' + +. ./lib-git-p4.sh + +test_file_is_not_in_mock_lfs () { + FILE="$1" && + CONTENT="$2" && + echo "$CONTENT" >expect_content && + test_path_is_file "$FILE" && + test_cmp expect_content "$FILE" +} + +test_file_is_in_mock_lfs () { + FILE="$1" && + CONTENT="$2" && + LOCAL_STORAGE=".git/mock-storage/local/$CONTENT" && + SERVER_STORAGE=".git/mock-storage/remote/$CONTENT" && + echo "pointer-$CONTENT" >expect_pointer && + echo "$CONTENT" >expect_content && + test_path_is_file "$FILE" && + test_path_is_file "$LOCAL_STORAGE" && + test_path_is_file "$SERVER_STORAGE" && + test_cmp expect_pointer "$FILE" && + test_cmp expect_content "$LOCAL_STORAGE" && + test_cmp expect_content "$SERVER_STORAGE" +} + +test_file_is_deleted_in_mock_lfs () { + FILE="$1" && + CONTENT="$2" && + LOCAL_STORAGE=".git/mock-storage/local/$CONTENT" && + SERVER_STORAGE=".git/mock-storage/remote/$CONTENT" && + echo "pointer-$CONTENT" >expect_pointer && + echo "$CONTENT" >expect_content && + test_path_is_missing "$FILE" && + test_path_is_file "$LOCAL_STORAGE" && + test_path_is_file "$SERVER_STORAGE" && + test_cmp expect_content "$LOCAL_STORAGE" && + test_cmp expect_content "$SERVER_STORAGE" +} + +test_file_count_in_dir () { + DIR="$1" && + EXPECTED_COUNT="$2" && + find "$DIR" -type f >actual && + test_line_count = $EXPECTED_COUNT actual +} + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'Create repo with binary files' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + + echo "content 1 txt 23 bytes" >file1.txt && + p4 add file1.txt && + echo "content 2-3 bin 25 bytes" >file2.dat && + p4 add file2.dat && + p4 submit -d "Add text and binary file" && + + mkdir "path with spaces" && + echo "content 2-3 bin 25 bytes" >"path with spaces/file3.bin" && + p4 add "path with spaces/file3.bin" && + p4 submit -d "Add another binary file with same content and spaces in path" && + + echo "content 4 bin 26 bytes XX" >file4.bin && + p4 add file4.bin && + p4 submit -d "Add another binary file with different content" + ) +' + +test_expect_success 'Store files in Mock LFS based on size (>24 bytes)' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem MockLFS && + git config git-p4.largeFileThreshold 24 && + git config git-p4.largeFilePush True && + git p4 clone --destination="$git" //depot@all && + + test_file_is_not_in_mock_lfs file1.txt "content 1 txt 23 bytes" && + test_file_is_in_mock_lfs file2.dat "content 2-3 bin 25 bytes" && + test_file_is_in_mock_lfs "path with spaces/file3.bin" "content 2-3 bin 25 bytes" && + test_file_is_in_mock_lfs file4.bin "content 4 bin 26 bytes XX" && + + test_file_count_in_dir ".git/mock-storage/local" 2 && + test_file_count_in_dir ".git/mock-storage/remote" 2 + ) +' + +test_expect_success 'Store files in Mock LFS based on extension (dat)' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem MockLFS && + git config git-p4.largeFileExtensions dat && + git config git-p4.largeFilePush True && + git p4 clone --destination="$git" //depot@all && + + test_file_is_not_in_mock_lfs file1.txt "content 1 txt 23 bytes" && + test_file_is_in_mock_lfs file2.dat "content 2-3 bin 25 bytes" && + test_file_is_not_in_mock_lfs "path with spaces/file3.bin" "content 2-3 bin 25 bytes" && + test_file_is_not_in_mock_lfs file4.bin "content 4 bin 26 bytes XX" && + + test_file_count_in_dir ".git/mock-storage/local" 1 && + test_file_count_in_dir ".git/mock-storage/remote" 1 + ) +' + +test_expect_success 'Store files in Mock LFS based on extension (dat) and use git p4 sync and no client spec' ' + test_when_finished cleanup_git && + ( + cd "$git" && + git init && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem MockLFS && + git config git-p4.largeFileExtensions dat && + git config git-p4.largeFilePush True && + git p4 sync //depot && + git checkout p4/master && + + test_file_is_not_in_mock_lfs file1.txt "content 1 txt 23 bytes" && + test_file_is_in_mock_lfs file2.dat "content 2-3 bin 25 bytes" && + test_file_is_not_in_mock_lfs "path with spaces/file3.bin" "content 2-3 bin 25 bytes" && + test_file_is_not_in_mock_lfs file4.bin "content 4 bin 26 bytes XX" && + + test_file_count_in_dir ".git/mock-storage/local" 1 && + test_file_count_in_dir ".git/mock-storage/remote" 1 + ) +' + +test_expect_success 'Remove file from repo and store files in Mock LFS based on size (>24 bytes)' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 delete file4.bin && + p4 submit -d "Remove file" + ) && + + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem MockLFS && + git config git-p4.largeFileThreshold 24 && + git config git-p4.largeFilePush True && + git p4 clone --destination="$git" //depot@all && + + test_file_is_not_in_mock_lfs file1.txt "content 1 txt 23 bytes" && + test_file_is_in_mock_lfs file2.dat "content 2-3 bin 25 bytes" && + test_file_is_in_mock_lfs "path with spaces/file3.bin" "content 2-3 bin 25 bytes" && + test_file_is_deleted_in_mock_lfs file4.bin "content 4 bin 26 bytes XX" && + + test_file_count_in_dir ".git/mock-storage/local" 2 && + test_file_count_in_dir ".git/mock-storage/remote" 2 + ) +' + +test_expect_success 'Run git p4 submit in repo configured with large file system' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem MockLFS && + git config git-p4.largeFileThreshold 24 && + git config git-p4.largeFilePush True && + git p4 clone --destination="$git" //depot@all && + + test_must_fail git p4 submit + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9824-git-p4-git-lfs.sh b/t/t9824-git-p4-git-lfs.sh new file mode 100755 index 0000000000..ed80ca858c --- /dev/null +++ b/t/t9824-git-p4-git-lfs.sh @@ -0,0 +1,294 @@ +#!/bin/sh + +test_description='Clone repositories and store files in Git LFS' + +. ./lib-git-p4.sh + +git lfs help >/dev/null 2>&1 || { + skip_all='skipping git p4 Git LFS tests; Git LFS not found' + test_done +} + +test_file_in_lfs () { + FILE="$1" && + SIZE="$2" && + EXPECTED_CONTENT="$3" && + sed -n '1,1 p' "$FILE" | grep "^version " && + sed -n '2,2 p' "$FILE" | grep "^oid " && + sed -n '3,3 p' "$FILE" | grep "^size " && + test_line_count = 3 "$FILE" && + cat "$FILE" | grep "size $SIZE" && + HASH=$(cat "$FILE" | grep "oid sha256:" | sed -e "s/oid sha256://g") && + LFS_FILE=".git/lfs/objects/$(echo "$HASH" | cut -c1-2)/$(echo "$HASH" | cut -c3-4)/$HASH" && + echo $EXPECTED_CONTENT >expect && + test_path_is_file "$FILE" && + test_path_is_file "$LFS_FILE" && + test_cmp expect "$LFS_FILE" +} + +test_file_count_in_dir () { + DIR="$1" && + EXPECTED_COUNT="$2" && + find "$DIR" -type f >actual && + test_line_count = $EXPECTED_COUNT actual +} + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'Create repo with binary files' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + + >file0.dat && + p4 add file0.dat && + echo "content 1 txt 23 bytes" >file1.txt && + p4 add file1.txt && + echo "content 2-3 bin 25 bytes" >file2.dat && + p4 add file2.dat && + p4 submit -d "Add text and binary file" && + + mkdir "path with spaces" && + echo "content 2-3 bin 25 bytes" >"path with spaces/file3.bin" && + p4 add "path with spaces/file3.bin" && + p4 submit -d "Add another binary file with same content and spaces in path" && + + echo "content 4 bin 26 bytes XX" >file4.bin && + p4 add file4.bin && + p4 submit -d "Add another binary file with different content" + ) +' + +test_expect_success 'Store files in LFS based on size (>24 bytes)' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem GitLFS && + git config git-p4.largeFileThreshold 24 && + git p4 clone --destination="$git" //depot@all && + + test_file_in_lfs file2.dat 25 "content 2-3 bin 25 bytes" && + test_file_in_lfs "path with spaces/file3.bin" 25 "content 2-3 bin 25 bytes" && + test_file_in_lfs file4.bin 26 "content 4 bin 26 bytes XX" && + + test_file_count_in_dir ".git/lfs/objects" 2 && + + cat >expect <<-\EOF && + + # + # Git LFS (see https://git-lfs.github.com/) + # + /file2.dat filter=lfs diff=lfs merge=lfs -text + /file4.bin filter=lfs diff=lfs merge=lfs -text + /path[[:space:]]with[[:space:]]spaces/file3.bin filter=lfs diff=lfs merge=lfs -text + EOF + test_path_is_file .gitattributes && + test_cmp expect .gitattributes + ) +' + +test_expect_success 'Store files in LFS based on size (>25 bytes)' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem GitLFS && + git config git-p4.largeFileThreshold 25 && + git p4 clone --destination="$git" //depot@all && + + test_file_in_lfs file4.bin 26 "content 4 bin 26 bytes XX" && + test_file_count_in_dir ".git/lfs/objects" 1 && + + cat >expect <<-\EOF && + + # + # Git LFS (see https://git-lfs.github.com/) + # + /file4.bin filter=lfs diff=lfs merge=lfs -text + EOF + test_path_is_file .gitattributes && + test_cmp expect .gitattributes + ) +' + +test_expect_success 'Store files in LFS based on extension (dat)' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem GitLFS && + git config git-p4.largeFileExtensions dat && + git p4 clone --destination="$git" //depot@all && + + test_file_in_lfs file2.dat 25 "content 2-3 bin 25 bytes" && + test_file_count_in_dir ".git/lfs/objects" 1 && + + cat >expect <<-\EOF && + + # + # Git LFS (see https://git-lfs.github.com/) + # + *.dat filter=lfs diff=lfs merge=lfs -text + EOF + test_path_is_file .gitattributes && + test_cmp expect .gitattributes + ) +' + +test_expect_success 'Store files in LFS based on size (>25 bytes) and extension (dat)' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem GitLFS && + git config git-p4.largeFileExtensions dat && + git config git-p4.largeFileThreshold 25 && + git p4 clone --destination="$git" //depot@all && + + test_file_in_lfs file2.dat 25 "content 2-3 bin 25 bytes" && + test_file_in_lfs file4.bin 26 "content 4 bin 26 bytes XX" && + test_file_count_in_dir ".git/lfs/objects" 2 && + + cat >expect <<-\EOF && + + # + # Git LFS (see https://git-lfs.github.com/) + # + *.dat filter=lfs diff=lfs merge=lfs -text + /file4.bin filter=lfs diff=lfs merge=lfs -text + EOF + test_path_is_file .gitattributes && + test_cmp expect .gitattributes + ) +' + +test_expect_success 'Remove file from repo and store files in LFS based on size (>24 bytes)' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 delete file4.bin && + p4 submit -d "Remove file" + ) && + + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem GitLFS && + git config git-p4.largeFileThreshold 24 && + git p4 clone --destination="$git" //depot@all && + + test_file_in_lfs file2.dat 25 "content 2-3 bin 25 bytes" && + test_file_in_lfs "path with spaces/file3.bin" 25 "content 2-3 bin 25 bytes" && + test_path_is_missing file4.bin && + test_file_count_in_dir ".git/lfs/objects" 2 && + + cat >expect <<-\EOF && + + # + # Git LFS (see https://git-lfs.github.com/) + # + /file2.dat filter=lfs diff=lfs merge=lfs -text + /path[[:space:]]with[[:space:]]spaces/file3.bin filter=lfs diff=lfs merge=lfs -text + EOF + test_path_is_file .gitattributes && + test_cmp expect .gitattributes + ) +' + +test_expect_success 'Add .gitattributes and store files in LFS based on size (>24 bytes)' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + echo "*.txt text" >.gitattributes && + p4 add .gitattributes && + p4 submit -d "Add .gitattributes" + ) && + + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem GitLFS && + git config git-p4.largeFileThreshold 24 && + git p4 clone --destination="$git" //depot@all && + + test_file_in_lfs file2.dat 25 "content 2-3 bin 25 bytes" && + test_file_in_lfs "path with spaces/file3.bin" 25 "content 2-3 bin 25 bytes" && + test_path_is_missing file4.bin && + test_file_count_in_dir ".git/lfs/objects" 2 && + + cat >expect <<-\EOF && + *.txt text + + # + # Git LFS (see https://git-lfs.github.com/) + # + /file2.dat filter=lfs diff=lfs merge=lfs -text + /path[[:space:]]with[[:space:]]spaces/file3.bin filter=lfs diff=lfs merge=lfs -text + EOF + test_path_is_file .gitattributes && + test_cmp expect .gitattributes + ) +' + +test_expect_success 'Add big files to repo and store files in LFS based on compressed size (>28 bytes)' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + echo "content 5 bin 40 bytes XXXXXXXXXXXXXXXX" >file5.bin && + p4 add file5.bin && + p4 submit -d "Add file with small footprint after compression" && + + echo "content 6 bin 39 bytes XXXXXYYYYYZZZZZ" >file6.bin && + p4 add file6.bin && + p4 submit -d "Add file with large footprint after compression" + ) && + + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.useClientSpec true && + git config git-p4.largeFileSystem GitLFS && + git config git-p4.largeFileCompressedThreshold 28 && + # We only import HEAD here ("@all" is missing!) + git p4 clone --destination="$git" //depot && + + test_file_in_lfs file6.bin 39 "content 6 bin 39 bytes XXXXXYYYYYZZZZZ" && + test_file_count_in_dir ".git/lfs/objects" 1 && + + cat >expect <<-\EOF && + *.txt text + + # + # Git LFS (see https://git-lfs.github.com/) + # + /file6.bin filter=lfs diff=lfs merge=lfs -text + EOF + test_path_is_file .gitattributes && + test_cmp expect .gitattributes + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9825-git-p4-handle-utf16-without-bom.sh b/t/t9825-git-p4-handle-utf16-without-bom.sh new file mode 100755 index 0000000000..1551845dc1 --- /dev/null +++ b/t/t9825-git-p4-handle-utf16-without-bom.sh @@ -0,0 +1,50 @@ +#!/bin/sh + +test_description='git p4 handling of UTF-16 files without BOM' + +. ./lib-git-p4.sh + +UTF16="\227\000\227\000" + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'init depot with UTF-16 encoded file and artificially remove BOM' ' + ( + cd "$cli" && + printf "$UTF16" >file1 && + p4 add -t utf16 file1 && + p4 submit -d "file1" + ) && + + ( + cd db && + p4d -jc && + # P4D automatically adds a BOM. Remove it here to make the file invalid. + sed -e "\$d" depot/file1,v >depot/file1,v.new && + mv depot/file1,v.new depot/file1,v && + printf "@$UTF16@" >>depot/file1,v && + p4d -jrF checkpoint.1 + ) +' + +test_expect_success 'clone depot with invalid UTF-16 file in verbose mode' ' + git p4 clone --dest="$git" --verbose //depot && + test_when_finished cleanup_git && + ( + cd "$git" && + printf "$UTF16" >expect && + test_cmp_bin expect file1 + ) +' + +test_expect_failure 'clone depot with invalid UTF-16 file in non-verbose mode' ' + git p4 clone --dest="$git" //depot +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9826-git-p4-keep-empty-commits.sh b/t/t9826-git-p4-keep-empty-commits.sh new file mode 100755 index 0000000000..fa8b9daf1f --- /dev/null +++ b/t/t9826-git-p4-keep-empty-commits.sh @@ -0,0 +1,134 @@ +#!/bin/sh + +test_description='Clone repositories and keep empty commits' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'Create a repo' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + + mkdir -p subdir && + + >subdir/file1.txt && + p4 add subdir/file1.txt && + p4 submit -d "Add file 1" && + + >file2.txt && + p4 add file2.txt && + p4 submit -d "Add file 2" && + + >subdir/file3.txt && + p4 add subdir/file3.txt && + p4 submit -d "Add file 3" && + + >file4.txt && + p4 add file4.txt && + p4 submit -d "Add file 4" && + + p4 delete subdir/file3.txt && + p4 submit -d "Remove file 3" && + + p4 delete file4.txt && + p4 submit -d "Remove file 4" + ) +' + +test_expect_success 'Clone repo root path with all history' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git p4 clone --use-client-spec --destination="$git" //depot@all && + cat >expect <<-\EOF && + Remove file 4 + [git-p4: depot-paths = "//depot/": change = 6] + + Remove file 3 + [git-p4: depot-paths = "//depot/": change = 5] + + Add file 4 + [git-p4: depot-paths = "//depot/": change = 4] + + Add file 3 + [git-p4: depot-paths = "//depot/": change = 3] + + Add file 2 + [git-p4: depot-paths = "//depot/": change = 2] + + Add file 1 + [git-p4: depot-paths = "//depot/": change = 1] + + EOF + git log --format=%B >actual && + test_cmp expect actual + ) +' + +test_expect_success 'Clone repo subdir with all history but keep empty commits' ' + client_view "//depot/subdir/... //client/subdir/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config git-p4.keepEmptyCommits true && + git p4 clone --use-client-spec --destination="$git" //depot@all && + cat >expect <<-\EOF && + Remove file 4 + [git-p4: depot-paths = "//depot/": change = 6] + + Remove file 3 + [git-p4: depot-paths = "//depot/": change = 5] + + Add file 4 + [git-p4: depot-paths = "//depot/": change = 4] + + Add file 3 + [git-p4: depot-paths = "//depot/": change = 3] + + Add file 2 + [git-p4: depot-paths = "//depot/": change = 2] + + Add file 1 + [git-p4: depot-paths = "//depot/": change = 1] + + EOF + git log --format=%B >actual && + test_cmp expect actual + ) +' + +test_expect_success 'Clone repo subdir with all history' ' + client_view "//depot/subdir/... //client/subdir/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git p4 clone --use-client-spec --destination="$git" --verbose //depot@all && + cat >expect <<-\EOF && + Remove file 3 + [git-p4: depot-paths = "//depot/": change = 5] + + Add file 3 + [git-p4: depot-paths = "//depot/": change = 3] + + Add file 1 + [git-p4: depot-paths = "//depot/": change = 1] + + EOF + git log --format=%B >actual && + test_cmp expect actual + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9827-git-p4-change-filetype.sh b/t/t9827-git-p4-change-filetype.sh new file mode 100755 index 0000000000..7433998f47 --- /dev/null +++ b/t/t9827-git-p4-change-filetype.sh @@ -0,0 +1,66 @@ +#!/bin/sh + +test_description='git p4 support for file type change' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'create files' ' + ( + cd "$cli" && + p4 client -o | sed "/LineEnd/s/:.*/:unix/" | p4 client -i && + cat >file1 <<-EOF && + text without any funny substitution business + EOF + cat >file2 <<-EOF && + second file whose type will change + EOF + p4 add file1 file2 && + p4 submit -d "add files" + ) +' + +test_expect_success SYMLINKS 'change file to symbolic link' ' + git p4 clone --dest="$git" //depot@all && + test_when_finished cleanup_git && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + + rm file2 && + ln -s file1 file2 && + git add file2 && + git commit -m "symlink file1 to file2" && + git p4 submit && + p4 filelog -m 1 //depot/file2 >filelog && + grep "(symlink)" filelog + ) +' + +test_expect_success SYMLINKS 'change symbolic link to file' ' + git p4 clone --dest="$git" //depot@all && + test_when_finished cleanup_git && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + + rm file2 && + cat >file2 <<-EOF && + This is another content for the second file. + EOF + git add file2 && + git commit -m "re-write file2" && + git p4 submit && + p4 filelog -m 1 //depot/file2 >filelog && + grep "(text)" filelog + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9828-git-p4-map-user.sh b/t/t9828-git-p4-map-user.sh new file mode 100755 index 0000000000..e20395c89f --- /dev/null +++ b/t/t9828-git-p4-map-user.sh @@ -0,0 +1,61 @@ +#!/bin/sh + +test_description='Clone repositories and map users' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'Create a repo with different users' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + + >author.txt && + p4 add author.txt && + p4 submit -d "Add file author\\n" && + + P4USER=mmax && + >max.txt && + p4 add max.txt && + p4 submit -d "Add file max" && + + P4USER=eri && + >moritz.txt && + p4 add moritz.txt && + p4 submit -d "Add file moritz" && + + P4USER=no && + >nobody.txt && + p4 add nobody.txt && + p4 submit -d "Add file nobody" + ) +' + +test_expect_success 'Clone repo root path with all history' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git config --add git-p4.mapUser "mmax = Max Musterman <max@example.com> " && + git config --add git-p4.mapUser " eri=Erika Musterman <erika@example.com>" && + git p4 clone --use-client-spec --destination="$git" //depot@all && + cat >expect <<-\EOF && + no <no@client> + Erika Musterman <erika@example.com> + Max Musterman <max@example.com> + Dr. author <author@example.com> + EOF + git log --format="%an <%ae>" >actual && + test_cmp expect actual + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9829-git-p4-jobs.sh b/t/t9829-git-p4-jobs.sh new file mode 100755 index 0000000000..971aeeea1f --- /dev/null +++ b/t/t9829-git-p4-jobs.sh @@ -0,0 +1,99 @@ +#!/bin/sh + +test_description='git p4 retrieve job info' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'add p4 jobs' ' + ( + p4_add_job TESTJOB-A && + p4_add_job TESTJOB-B + ) +' + +test_expect_success 'add p4 files' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + >file1 && + p4 add file1 && + p4 submit -d "Add file 1" + ) +' + +test_expect_success 'check log message of changelist with no jobs' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git p4 clone --use-client-spec --destination="$git" //depot@all && + cat >expect <<-\EOF && + Add file 1 + [git-p4: depot-paths = "//depot/": change = 1] + + EOF + git log --format=%B >actual && + test_cmp expect actual + ) +' + +test_expect_success 'add TESTJOB-A to change 1' ' + ( + cd "$cli" && + p4 fix -c 1 TESTJOB-A + ) +' + +test_expect_success 'check log message of changelist with one job' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git p4 clone --use-client-spec --destination="$git" //depot@all && + cat >expect <<-\EOF && + Add file 1 + Jobs: TESTJOB-A + [git-p4: depot-paths = "//depot/": change = 1] + + EOF + git log --format=%B >actual && + test_cmp expect actual + ) +' + +test_expect_success 'add TESTJOB-B to change 1' ' + ( + cd "$cli" && + p4 fix -c 1 TESTJOB-B + ) +' + +test_expect_success 'check log message of changelist with more jobs' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + ( + cd "$git" && + git init . && + git p4 clone --use-client-spec --destination="$git" //depot@all && + cat >expect <<-\EOF && + Add file 1 + Jobs: TESTJOB-A TESTJOB-B + [git-p4: depot-paths = "//depot/": change = 1] + + EOF + git log --format=%B >actual && + test_cmp expect actual + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9830-git-p4-symlink-dir.sh b/t/t9830-git-p4-symlink-dir.sh new file mode 100755 index 0000000000..3dc528bb1e --- /dev/null +++ b/t/t9830-git-p4-symlink-dir.sh @@ -0,0 +1,43 @@ +#!/bin/sh + +test_description='git p4 symlinked directories' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'symlinked directory' ' + ( + cd "$cli" && + : >first_file.t && + p4 add first_file.t && + p4 submit -d "first change" + ) && + git p4 clone --dest "$git" //depot && + ( + cd "$git" && + mkdir -p some/sub/directory && + mkdir -p other/subdir2 && + : > other/subdir2/file.t && + (cd some/sub/directory && ln -s ../../../other/subdir2 .) && + git add some other && + git commit -m "symlinks" && + git config git-p4.skipSubmitEdit true && + git p4 submit -v + ) && + ( + cd "$cli" && + p4 sync && + test -L some/sub/directory/subdir2 + test_path_is_file some/sub/directory/subdir2/file.t + ) + +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9901-git-web--browse.sh b/t/t9901-git-web--browse.sh index b0a6bad8dd..de7152f827 100755 --- a/t/t9901-git-web--browse.sh +++ b/t/t9901-git-web--browse.sh @@ -43,7 +43,7 @@ test_expect_success \ echo fake: "$@" EOF chmod +x "fake browser" && - git config browser.w3m.path "`pwd`/fake browser" && + git config browser.w3m.path "$(pwd)/fake browser" && test_web_browse w3m http://example.com/foo ' diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 2ba62fbc17..a34e55f874 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -257,12 +257,7 @@ test_expect_success SYMLINKS '__gitdir - resulting path avoids symlinks' ' ' test_expect_success '__gitdir - not a git repository' ' - ( - cd subdir/subsubdir && - GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY" && - export GIT_CEILING_DIRECTORIES && - test_must_fail __gitdir - ) + nongit test_must_fail __gitdir ' test_expect_success '__gitcomp - trailing space - options' ' diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 49d58e6726..97c9b32c2e 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -67,7 +67,7 @@ repo_with_newline='repo with newline' -if mkdir "$repo_with_newline" 2>/dev/null +if test_have_prereq !MINGW && mkdir "$repo_with_newline" 2>/dev/null then test_set_prereq FUNNYNAMES else @@ -107,7 +107,7 @@ test_expect_success 'prompt - describe detached head - contains' ' ' test_expect_success 'prompt - describe detached head - branch' ' - printf " ((b1~1))" >expected && + printf " ((tags/t2~1))" >expected && git checkout b1^ && test_when_finished "git checkout master" && ( @@ -177,7 +177,7 @@ test_expect_success 'prompt - interactive rebase' ' git checkout b1 && test_when_finished "git checkout master" && git rebase -i HEAD^ && - test_when_finished "git rebase --abort" + test_when_finished "git rebase --abort" && __git_ps1 >"$actual" && test_cmp expected "$actual" ' @@ -273,11 +273,36 @@ test_expect_success 'prompt - dirty status indicator - dirty index and worktree' test_cmp expected "$actual" ' -test_expect_success 'prompt - dirty status indicator - before root commit' ' - printf " (master #)" >expected && +test_expect_success 'prompt - dirty status indicator - orphan branch - clean' ' + printf " (orphan #)" >expected && + test_when_finished "git checkout master" && + git checkout --orphan orphan && + git reset --hard && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - orphan branch - dirty index' ' + printf " (orphan +)" >expected && + test_when_finished "git checkout master" && + git checkout --orphan orphan && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - orphan branch - dirty index and worktree' ' + printf " (orphan *+)" >expected && + test_when_finished "git checkout master" && + git checkout --orphan orphan && + >file && ( GIT_PS1_SHOWDIRTYSTATE=y && - cd otherrepo && __git_ps1 >"$actual" ) && test_cmp expected "$actual" @@ -397,6 +422,31 @@ test_expect_success 'prompt - untracked files status indicator - untracked files test_cmp expected "$actual" ' +test_expect_success 'prompt - untracked files status indicator - empty untracked dir' ' + printf " (master)" >expected && + mkdir otherrepo/untracked-dir && + test_when_finished "rm -rf otherrepo/untracked-dir" && + ( + GIT_PS1_SHOWUNTRACKEDFILES=y && + cd otherrepo && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - untracked files status indicator - non-empty untracked dir' ' + printf " (master %%)" >expected && + mkdir otherrepo/untracked-dir && + test_when_finished "rm -rf otherrepo/untracked-dir" && + >otherrepo/untracked-dir/untracked-file && + ( + GIT_PS1_SHOWUNTRACKEDFILES=y && + cd otherrepo && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + test_expect_success 'prompt - untracked files status indicator - untracked files outside cwd' ' printf " (master %%)" >expected && ( diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index e8d3c0fdbc..bd357704cc 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -81,6 +81,10 @@ test_decode_color () { ' } +lf_to_nul () { + perl -pe 'y/\012/\000/' +} + nul_to_q () { perl -pe 'y/\000/Q/' } @@ -145,16 +149,29 @@ test_pause () { fi } -# Call test_commit with the arguments "<message> [<file> [<contents> [<tag>]]]" +# Wrap git in gdb. Adding this to a command can make it easier to +# understand what is going on in a failing test. +# +# Example: "debug git checkout master". +debug () { + GIT_TEST_GDB=1 "$@" +} + +# Call test_commit with the arguments +# [-C <directory>] <message> [<file> [<contents> [<tag>]]]" # # This will commit a file with the given contents and the given commit # message, and tag the resulting commit with the given tag name. # # <file>, <contents>, and <tag> all default to <message>. +# +# If the first argument is "-C", the second argument is used as a path for +# the git invocations. test_commit () { notick= && signoff= && + indir= && while test $# != 0 do case "$1" in @@ -164,21 +181,26 @@ test_commit () { --signoff) signoff="$1" ;; + -C) + indir="$2" + shift + ;; *) break ;; esac shift done && + indir=${indir:+"$indir"/} && file=${2:-"$1.t"} && - echo "${3-$1}" > "$file" && - git add "$file" && + echo "${3-$1}" > "$indir$file" && + git ${indir:+ -C "$indir"} add "$file" && if test -z "$notick" then test_tick fi && - git commit $signoff -m "$1" && - git tag "${4:-$1}" + git ${indir:+ -C "$indir"} commit $signoff -m "$1" && + git ${indir:+ -C "$indir"} tag "${4:-$1}" } # Call test_merge with the arguments "<message> <commit>", where <commit> @@ -201,7 +223,14 @@ test_chmod () { # Unset a configuration variable, but don't fail if it doesn't exist. test_unconfig () { - git config --unset-all "$@" + config_dir= + if test "$1" = -C + then + shift + config_dir=$1 + shift + fi + git ${config_dir:+-C "$config_dir"} config --unset-all "$@" config_status=$? case "$config_status" in 5) # ok, nothing to unset @@ -213,8 +242,15 @@ test_unconfig () { # Set git config, automatically unsetting it after the test is over. test_config () { - test_when_finished "test_unconfig '$1'" && - git config "$@" + config_dir= + if test "$1" = -C + then + shift + config_dir=$1 + shift + fi + test_when_finished "test_unconfig ${config_dir:+-C '$config_dir'} '$1'" && + git ${config_dir:+-C "$config_dir"} config "$@" } test_config_global () { @@ -547,6 +583,21 @@ test_line_count () { fi } +# Returns success if a comma separated string of keywords ($1) contains a +# given keyword ($2). +# Examples: +# `list_contains "foo,bar" bar` returns 0 +# `list_contains "foo" bar` returns 1 + +list_contains () { + case ",$1," in + *,$2,*) + return 0 + ;; + esac + return 1 +} + # This is not among top-level (test_expect_success | test_expect_failure) # but is a prefix that can be used in the test script, like: # @@ -560,18 +611,34 @@ test_line_count () { # the failure could be due to a segv. We want a controlled failure. test_must_fail () { + case "$1" in + ok=*) + _test_ok=${1#ok=} + shift + ;; + *) + _test_ok= + ;; + esac "$@" exit_code=$? - if test $exit_code = 0; then + if test $exit_code -eq 0 && ! list_contains "$_test_ok" success + then echo >&2 "test_must_fail: command succeeded: $*" return 1 - elif test $exit_code -gt 129 && test $exit_code -le 192; then - echo >&2 "test_must_fail: died by signal: $*" + elif test_match_signal 13 $exit_code && list_contains "$_test_ok" sigpipe + then + return 0 + elif test $exit_code -gt 129 && test $exit_code -le 192 + then + echo >&2 "test_must_fail: died by signal $(($exit_code - 128)): $*" return 1 - elif test $exit_code = 127; then + elif test $exit_code -eq 127 + then echo >&2 "test_must_fail: command not found: $*" return 1 - elif test $exit_code = 126; then + elif test $exit_code -eq 126 + then echo >&2 "test_must_fail: valgrind error: $*" return 1 fi @@ -590,16 +657,7 @@ test_must_fail () { # because we want to notice if it fails due to segv. test_might_fail () { - "$@" - exit_code=$? - if test $exit_code -gt 129 && test $exit_code -le 192; then - echo >&2 "test_might_fail: died by signal: $*" - return 1 - elif test $exit_code = 127; then - echo >&2 "test_might_fail: command not found: $*" - return 1 - fi - return 0 + test_must_fail ok=success "$@" } # Similar to test_must_fail and test_might_fail, but check that a @@ -674,20 +732,13 @@ test_cmp_rev () { test_cmp expect.rev actual.rev } -# Print a sequence of numbers or letters in increasing order. This is -# similar to GNU seq(1), but the latter might not be available -# everywhere (and does not do letters). It may be used like: +# Print a sequence of integers in increasing order, either with +# two arguments (start and end): # -# for i in $(test_seq 100) -# do -# for j in $(test_seq 10 20) -# do -# for k in $(test_seq a z) -# do -# echo $i-$j-$k -# done -# done -# done +# test_seq 1 5 -- outputs 1 2 3 4 5 one line at a time +# +# or with one argument (end), in which case it starts counting +# from 1. test_seq () { case $# in @@ -695,7 +746,12 @@ test_seq () { 2) ;; *) error "bug in the test script: not 1 or 2 parameters to test_seq" ;; esac - perl -le 'print for $ARGV[0]..$ARGV[1]' -- "$@" + test_seq_counter__=$1 + while test "$test_seq_counter__" -le "$2" + do + echo "$test_seq_counter__" + test_seq_counter__=$(( $test_seq_counter__ + 1 )) + done } # This function can be used to schedule some commands to be run @@ -722,6 +778,11 @@ test_seq () { # what went wrong. test_when_finished () { + # We cannot detect when we are in a subshell in general, but by + # doing so on Bash is better than nothing (the test will + # silently pass on other shells). + test "${BASH_SUBSHELL-0}" = 0 || + error "bug in test script: test_when_finished does nothing in a subshell" test_cleanup="{ $* } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" } @@ -892,3 +953,68 @@ mingw_read_file_strip_cr_ () { eval "$1=\$$1\$line" done } + +# Like "env FOO=BAR some-program", but run inside a subshell, which means +# it also works for shell functions (though those functions cannot impact +# the environment outside of the test_env invocation). +test_env () { + ( + while test $# -gt 0 + do + case "$1" in + *=*) + eval "${1%%=*}=\${1#*=}" + eval "export ${1%%=*}" + shift + ;; + *) + "$@" + exit + ;; + esac + done + ) +} + +# Returns true if the numeric exit code in "$2" represents the expected signal +# in "$1". Signals should be given numerically. +test_match_signal () { + if test "$2" = "$((128 + $1))" + then + # POSIX + return 0 + elif test "$2" = "$((256 + $1))" + then + # ksh + return 0 + fi + return 1 +} + +# Read up to "$1" bytes (or to EOF) from stdin and write them to stdout. +test_copy_bytes () { + perl -e ' + my $len = $ARGV[1]; + while ($len > 0) { + my $s; + my $nread = sysread(STDIN, $s, $len); + die "cannot read: $!" unless defined($nread); + print $s; + $len -= $nread; + } + ' - "$1" +} + +# run "$@" inside a non-git directory +nongit () { + test -d non-repo || + mkdir non-repo || + return 1 + + ( + GIT_CEILING_DIRECTORIES=$(pwd) && + export GIT_CEILING_DIRECTORIES && + cd non-repo && + "$@" + ) +} diff --git a/t/test-lib.sh b/t/test-lib.sh index 39da9c2d99..cde7fc7fcf 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -15,9 +15,6 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see http://www.gnu.org/licenses/ . -# Keep the original TERM for say_color -ORIGINAL_TERM=$TERM - # Test the binaries we have just built. The tests are kept in # t/ subdirectory and are run in 'trash directory' subdirectory. if test -z "$TEST_DIRECTORY" @@ -57,23 +54,33 @@ case "$GIT_TEST_TEE_STARTED, $* " in done,*) # do not redirect again ;; -*' --tee '*|*' --va'*) +*' --tee '*|*' --va'*|*' --verbose-log '*) mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results" BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)" + + # Make this filename available to the sub-process in case it is using + # --verbose-log. + GIT_TEST_TEE_OUTPUT_FILE=$BASE.out + export GIT_TEST_TEE_OUTPUT_FILE + + # Truncate before calling "tee -a" to get rid of the results + # from any previous runs. + >"$GIT_TEST_TEE_OUTPUT_FILE" + (GIT_TEST_TEE_STARTED=done ${SHELL_PATH} "$0" "$@" 2>&1; - echo $? > $BASE.exit) | tee $BASE.out - test "$(cat $BASE.exit)" = 0 + echo $? >"$BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE" + test "$(cat "$BASE.exit")" = 0 exit ;; esac # For repeatability, reset the environment to known value. +# TERM is sanitized below, after saving color control sequences. LANG=C LC_ALL=C PAGER=cat TZ=UTC -TERM=dumb -export LANG LC_ALL PAGER TERM TZ +export LANG LC_ALL PAGER TZ EDITOR=: # A call to "unset" with no arguments causes at least Solaris 10 # /usr/xpg4/bin/sh and /bin/ksh to bail out. So keep the unsets @@ -92,6 +99,7 @@ unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e ' UNZIP PERF_ CURL_VERBOSE + TRACE_CURL )); my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); print join("\n", @vars); @@ -165,6 +173,9 @@ _x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05" # Zero SHA-1 _z40=0000000000000000000000000000000000000000 +EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904 +EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 + # Line feed LF=' ' @@ -173,7 +184,7 @@ LF=' # when case-folding filenames u200c=$(printf '\342\200\214') -export _x05 _x40 _z40 LF u200c +export _x05 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB # Each test should start with something like this, after copyright notices: # @@ -181,8 +192,14 @@ export _x05 _x40 _z40 LF u200c # This test checks if command xyzzy does the right thing... # ' # . ./test-lib.sh +test "x$TERM" != "xdumb" && ( + test -t 1 && + tput bold >/dev/null 2>&1 && + tput setaf 1 >/dev/null 2>&1 && + tput sgr0 >/dev/null 2>&1 + ) && + color=t -unset color while test "$#" -ne 0 do case "$1" in @@ -199,13 +216,13 @@ do } run_list=$1; shift ;; --run=*) - run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;; + run_list=${1#--*=}; shift ;; -h|--h|--he|--hel|--help) help=t; shift ;; -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) verbose=t; shift ;; --verbose-only=*) - verbose_only=$(expr "z$1" : 'z[^=]*=\(.*\)') + verbose_only=${1#--*=} shift ;; -q|--q|--qu|--qui|--quie|--quiet) # Ignore --quiet under a TAP::Harness. Saying how many tests @@ -219,15 +236,15 @@ do valgrind=memcheck shift ;; --valgrind=*) - valgrind=$(expr "z$1" : 'z[^=]*=\(.*\)') + valgrind=${1#--*=} shift ;; --valgrind-only=*) - valgrind_only=$(expr "z$1" : 'z[^=]*=\(.*\)') + valgrind_only=${1#--*=} shift ;; --tee) shift ;; # was handled already --root=*) - root=$(expr "z$1" : 'z[^=]*=\(.*\)') + root=${1#--*=} shift ;; --chain-lint) GIT_TEST_CHAIN_LINT=1 @@ -239,6 +256,9 @@ do trace=t verbose=t shift ;; + --verbose-log) + verbose_log=t + shift ;; *) echo "error: unknown test option '$1'" >&2; exit 1 ;; esac @@ -253,6 +273,44 @@ then verbose=t fi +if test -n "$color" +then + # Save the color control sequences now rather than run tput + # each time say_color() is called. This is done for two + # reasons: + # * TERM will be changed to dumb + # * HOME will be changed to a temporary directory and tput + # might need to read ~/.terminfo from the original HOME + # directory to get the control sequences + # Note: This approach assumes the control sequences don't end + # in a newline for any terminal of interest (command + # substitutions strip trailing newlines). Given that most + # (all?) terminals in common use are related to ECMA-48, this + # shouldn't be a problem. + say_color_error=$(tput bold; tput setaf 1) # bold red + say_color_skip=$(tput setaf 4) # blue + say_color_warn=$(tput setaf 3) # brown/yellow + say_color_pass=$(tput setaf 2) # green + say_color_info=$(tput setaf 6) # cyan + say_color_reset=$(tput sgr0) + say_color_="" # no formatting for normal text + say_color () { + test -z "$1" && test -n "$quiet" && return + eval "say_color_color=\$say_color_$1" + shift + printf "%s\\n" "$say_color_color$*$say_color_reset" + } +else + say_color() { + test -z "$1" && test -n "$quiet" && return + shift + printf "%s\n" "$*" + } +fi + +TERM=dumb +export TERM + error () { say_color error "error: $*" GIT_EXIT_OK=t @@ -263,6 +321,16 @@ say () { say_color info "$*" } +if test -n "$HARNESS_ACTIVE" +then + if test "$verbose" = t || test -n "$verbose_only" + then + printf 'Bail out! %s\n' \ + 'verbose mode forbidden under TAP harness; try --verbose-log' + exit 1 + fi +fi + test "${test_description}" != "" || error "Test script did not set test_description." @@ -274,13 +342,29 @@ fi exec 5>&1 exec 6<&0 -if test "$verbose" = "t" +if test "$verbose_log" = "t" +then + exec 3>>"$GIT_TEST_TEE_OUTPUT_FILE" 4>&3 +elif test "$verbose" = "t" then exec 4>&2 3>&1 else exec 4>/dev/null 3>/dev/null fi +# Send any "-x" output directly to stderr to avoid polluting tests +# which capture stderr. We can do this unconditionally since it +# has no effect if tracing isn't turned on. +# +# Note that this sets up the trace fd as soon as we assign the variable, so it +# must come after the creation of descriptor 4 above. Likewise, we must never +# unset this, as it has the side effect of closing descriptor 4, which we +# use to show verbose tests to the user. +# +# Note also that we don't need or want to export it. The tracing is local to +# this shell, and we would not want to influence any shells we exec. +BASH_XTRACEFD=4 + test_failure=0 test_count=0 test_fixed=0 @@ -490,6 +574,10 @@ maybe_setup_valgrind () { fi } +want_trace () { + test "$trace" = t && test "$verbose" = t +} + # This is a separate function because some tests use # "return" to end a test_expect_success block early # (and we want to make sure we run any cleanup like @@ -497,7 +585,7 @@ maybe_setup_valgrind () { test_eval_inner_ () { # Do not add anything extra (including LF) after '$*' eval " - test \"$trace\" = t && set -x + want_trace && set -x $*" } @@ -513,7 +601,7 @@ test_eval_ () { { test_eval_inner_ "$@" </dev/null >&3 2>&4 test_eval_ret_=$? - if test "$trace" = t + if want_trace then set +x if test "$test_eval_ret_" != 0 @@ -530,12 +618,17 @@ test_run_ () { expecting_failure=$2 if test "${GIT_TEST_CHAIN_LINT:-1}" != 0; then + # turn off tracing for this test-eval, as it simply creates + # confusing noise in the "-x" output + trace_tmp=$trace + trace= # 117 is magic because it is unlikely to match the exit # code of other programs test_eval_ "(exit 117) && $1" if test "$?" != 117; then error "bug in the test script: broken &&-chain: $1" fi + trace=$trace_tmp fi setup_malloc_check @@ -621,9 +714,9 @@ test_done () { test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results" mkdir -p "$test_results_dir" base=${0##*/} - test_results_path="$test_results_dir/${base%.sh}-$$.counts" + test_results_path="$test_results_dir/${base%.sh}.counts" - cat >>"$test_results_path" <<-EOF + cat >"$test_results_path" <<-EOF total $test_count success $test_success fixed $test_fixed @@ -716,7 +809,14 @@ then return; base=$(basename "$1") - symlink_target=$GIT_BUILD_DIR/$base + case "$base" in + test-*) + symlink_target="$GIT_BUILD_DIR/t/helper/$base" + ;; + *) + symlink_target="$GIT_BUILD_DIR/$base" + ;; + esac # do not override scripts if test -x "$symlink_target" && test ! -d "$symlink_target" && @@ -735,7 +835,7 @@ then # override all git executables in TEST_DIRECTORY/.. GIT_VALGRIND=$TEST_DIRECTORY/valgrind mkdir -p "$GIT_VALGRIND"/bin - for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/test-* + for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/t/helper/test-* do make_valgrind_symlink $file done @@ -804,10 +904,10 @@ test -d "$GIT_BUILD_DIR"/templates/blt || { error "You haven't built things yet, have you?" } -if ! test -x "$GIT_BUILD_DIR"/test-chmtime +if ! test -x "$GIT_BUILD_DIR"/t/helper/test-chmtime then echo >&2 'You need to build test-chmtime:' - echo >&2 'Run "make test-chmtime" in the source (toplevel) directory' + echo >&2 'Run "make t/helper/test-chmtime" in the source (toplevel) directory' exit 1 fi @@ -829,52 +929,6 @@ HOME="$TRASH_DIRECTORY" GNUPGHOME="$HOME/gnupg-home-not-used" export HOME GNUPGHOME -# run the tput tests *after* changing HOME (in case ncurses needs -# ~/.terminfo for $TERM) -test -n "${color+set}" || test "x$ORIGINAL_TERM" != "xdumb" && ( - TERM=$ORIGINAL_TERM && - export TERM && - test -t 1 && - tput bold >/dev/null 2>&1 && - tput setaf 1 >/dev/null 2>&1 && - tput sgr0 >/dev/null 2>&1 - ) && - color=t - -if test -n "$color" -then - say_color () { - ( - TERM=$ORIGINAL_TERM - export TERM - case "$1" in - error) - tput bold; tput setaf 1;; # bold red - skip) - tput setaf 4;; # blue - warn) - tput setaf 3;; # brown/yellow - pass) - tput setaf 2;; # green - info) - tput setaf 6;; # cyan - *) - test -n "$quiet" && return;; - esac - shift - printf "%s" "$*" - tput sgr0 - echo - ) - } -else - say_color() { - test -z "$1" && test -n "$quiet" && return - shift - printf "%s\n" "$*" - } -fi - if test -z "$TEST_NO_CREATE_REPO" then test_create_repo "$TRASH_DIRECTORY" @@ -903,9 +957,11 @@ yes () { y="$*" fi - while echo "$y" + i=0 + while test $i -lt 99 do - : + echo "$y" + i=$(($i+1)) done } @@ -994,7 +1050,7 @@ test_i18ngrep () { test_lazy_prereq PIPE ' # test whether the filesystem supports FIFOs case $(uname -s) in - CYGWIN*) + CYGWIN*|MINGW*) false ;; *) @@ -1050,20 +1106,32 @@ test_lazy_prereq NOT_ROOT ' test "$uid" != 0 ' -# On a filesystem that lacks SANITY, a file can be deleted even if -# the containing directory doesn't have write permissions, or a file -# can be accessed even if the containing directory doesn't have read -# or execute permissions, causing our tests that validate that Git -# works sensibly in such situations. +test_lazy_prereq JGIT ' + type jgit +' + +# SANITY is about "can you correctly predict what the filesystem would +# do by only looking at the permission bits of the files and +# directories?" A typical example of !SANITY is running the test +# suite as root, where a test may expect "chmod -r file && cat file" +# to fail because file is supposed to be unreadable after a successful +# chmod. In an environment (i.e. combination of what filesystem is +# being used and who is running the tests) that lacks SANITY, you may +# be able to delete or create a file when the containing directory +# doesn't have write permissions, or access a file even if the +# containing directory doesn't have read or execute permissions. + test_lazy_prereq SANITY ' mkdir SANETESTD.1 SANETESTD.2 && chmod +w SANETESTD.1 SANETESTD.2 && >SANETESTD.1/x 2>SANETESTD.2/x && chmod -w SANETESTD.1 && + chmod -r SANETESTD.1/x && chmod -rx SANETESTD.2 || error "bug in test sript: cannot prepare SANETESTD" + ! test -r SANETESTD.1/x && ! rm SANETESTD.1/x && ! test -f SANETESTD.2/x status=$? @@ -1084,3 +1152,12 @@ run_with_limited_cmdline () { } test_lazy_prereq CMDLINE_LIMIT 'run_with_limited_cmdline true' + +build_option () { + git version --build-options | + sed -ne "s/^$1: //p" +} + +test_lazy_prereq LONG_IS_64BIT ' + test 8 -le "$(build_option sizeof-long)" +' diff --git a/t/test-terminal.perl b/t/test-terminal.perl index 1fb373f25b..96b6a03e1c 100755 --- a/t/test-terminal.perl +++ b/t/test-terminal.perl @@ -5,15 +5,17 @@ use warnings; use IO::Pty; use File::Copy; -# Run @$argv in the background with stdio redirected to $out and $err. +# Run @$argv in the background with stdio redirected to $in, $out and $err. sub start_child { - my ($argv, $out, $err) = @_; + my ($argv, $in, $out, $err) = @_; my $pid = fork; if (not defined $pid) { die "fork failed: $!" } elsif ($pid == 0) { + open STDIN, "<&", $in; open STDOUT, ">&", $out; open STDERR, ">&", $err; + close $in; close $out; exec(@$argv) or die "cannot exec '$argv->[0]': $!" } @@ -49,6 +51,17 @@ sub xsendfile { copy($in, $out, 4096) or $!{EIO} or die "cannot copy from child: $!"; } +sub copy_stdin { + my ($in) = @_; + my $pid = fork; + if (!$pid) { + xsendfile($in, \*STDIN); + exit 0; + } + close($in); + return $pid; +} + sub copy_stdio { my ($out, $err) = @_; my $pid = fork; @@ -67,14 +80,25 @@ sub copy_stdio { if ($#ARGV < 1) { die "usage: test-terminal program args"; } +my $master_in = new IO::Pty; my $master_out = new IO::Pty; my $master_err = new IO::Pty; +$master_in->set_raw(); $master_out->set_raw(); $master_err->set_raw(); +$master_in->slave->set_raw(); $master_out->slave->set_raw(); $master_err->slave->set_raw(); -my $pid = start_child(\@ARGV, $master_out->slave, $master_err->slave); +my $pid = start_child(\@ARGV, $master_in->slave, $master_out->slave, $master_err->slave); +close $master_in->slave; close $master_out->slave; close $master_err->slave; +my $in_pid = copy_stdin($master_in); copy_stdio($master_out, $master_err); -exit(finish_child($pid)); +my $ret = finish_child($pid); +# If the child process terminates before our copy_stdin() process is able to +# write all of its data to $master_in, the copy_stdin() process could stall. +# Send SIGTERM to it to ensure it terminates. +kill 'TERM', $in_pid; +finish_child($in_pid); +exit($ret); diff --git a/t/valgrind/valgrind.sh b/t/valgrind/valgrind.sh index 42153036dc..669ebaf68b 100755 --- a/t/valgrind/valgrind.sh +++ b/t/valgrind/valgrind.sh @@ -1,11 +1,19 @@ #!/bin/sh base=$(basename "$0") +case "$base" in +test-*) + program="$GIT_VALGRIND/../../t/helper/$base" + ;; +*) + program="$GIT_VALGRIND/../../$base" + ;; +esac TOOL_OPTIONS='--leak-check=no' test -z "$GIT_VALGRIND_ENABLED" && -exec "$GIT_VALGRIND"/../../"$base" "$@" +exec "$program" "$@" case "$GIT_VALGRIND_MODE" in memcheck-fast) @@ -29,4 +37,4 @@ exec valgrind -q --error-exitcode=126 \ --log-fd=4 \ --input-fd=4 \ $GIT_VALGRIND_OPTIONS \ - "$GIT_VALGRIND"/../../"$base" "$@" + "$program" "$@" |