diff options
Diffstat (limited to 't')
39 files changed, 1358 insertions, 215 deletions
diff --git a/t/.gitattributes b/t/.gitattributes index e7acedabe1..df05434d32 100644 --- a/t/.gitattributes +++ b/t/.gitattributes @@ -16,6 +16,7 @@ t[0-9][0-9][0-9][0-9]/* -whitespace /t4135/* eol=lf /t4211/* eol=lf /t4252/* eol=lf +/t4256/1/* eol=lf /t5100/* eol=lf /t5515/* eol=lf /t556x_common eol=lf @@ -302,6 +302,12 @@ that cannot be easily covered by a few specific test cases. These could be enabled by running the test suite with correct GIT_TEST_ environment set. +GIT_TEST_GETTEXT_POISON=<non-empty?> turns all strings marked for +translation into gibberish if non-empty (think "test -n"). Used for +spotting those tests that need to be marked with a C_LOCALE_OUTPUT +prerequisite when adding more strings for translation. See "Testing +marked strings" in po/README for details. + GIT_TEST_SPLIT_INDEX=<boolean> forces split-index mode on the whole test suite. Accept any boolean values that are accepted by git-config. diff --git a/t/lib-gettext.sh b/t/lib-gettext.sh index eec757f104..2139b427ca 100644 --- a/t/lib-gettext.sh +++ b/t/lib-gettext.sh @@ -10,9 +10,14 @@ GIT_TEXTDOMAINDIR="$GIT_BUILD_DIR/po/build/locale" GIT_PO_PATH="$GIT_BUILD_DIR/po" export GIT_TEXTDOMAINDIR GIT_PO_PATH -. "$GIT_BUILD_DIR"/git-sh-i18n +if test -n "$GIT_TEST_INSTALLED" +then + . "$(git --exec-path)"/git-sh-i18n +else + . "$GIT_BUILD_DIR"/git-sh-i18n +fi -if test_have_prereq GETTEXT && ! test_have_prereq GETTEXT_POISON +if test_have_prereq GETTEXT && test_have_prereq C_LOCALE_OUTPUT then # is_IS.UTF-8 on Solaris and FreeBSD, is_IS.utf8 on Debian is_IS_locale=$(locale -a 2>/dev/null | diff --git a/t/lib-git-daemon.sh b/t/lib-git-daemon.sh index edbea2d986..f98de95c15 100644 --- a/t/lib-git-daemon.sh +++ b/t/lib-git-daemon.sh @@ -92,7 +92,7 @@ stop_git_daemon() { kill "$GIT_DAEMON_PID" wait "$GIT_DAEMON_PID" >&3 2>&4 ret=$? - if test_match_signal 15 $? + if ! test_match_signal 15 $ret then error "git daemon exited with status: $ret" fi diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh index 11d1922cf5..2e33ab3ec3 100644 --- a/t/perf/perf-lib.sh +++ b/t/perf/perf-lib.sh @@ -82,7 +82,7 @@ test_perf_do_repo_symlink_config_ () { test_perf_create_repo_from () { test "$#" = 2 || - error "bug in the test script: not 2 parameters to test-create-repo" + BUG "not 2 parameters to test-create-repo" repo="$1" source="$2" source_git="$("$MODERN_GIT" -C "$source" rev-parse --git-dir)" @@ -184,7 +184,7 @@ test_wrapper_ () { test_start_ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || - error "bug in the test script: not 2 or 3 parameters to test-expect-success" + BUG "not 2 or 3 parameters to test-expect-success" export test_prereq if ! test_skip "$@" then diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 4d23373526..b6566003dd 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -274,7 +274,7 @@ test_expect_success 'pretend we have a mix of all possible results' " EOF " -test_expect_success 'test --verbose' ' +test_expect_success C_LOCALE_OUTPUT 'test --verbose' ' test_must_fail run_sub_test_lib_test \ test-verbose "test verbose" --verbose <<-\EOF && test_expect_success "passing test" true diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 182da069f1..42a263cada 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -319,14 +319,14 @@ test_lazy_prereq GETCWD_IGNORES_PERMS ' base=GETCWD_TEST_BASE_DIR && mkdir -p $base/dir && chmod 100 $base || - error "bug in test script: cannot prepare $base" + BUG "cannot prepare $base" (cd $base/dir && /bin/pwd -P) status=$? chmod 700 $base && rm -rf $base || - error "bug in test script: cannot clean $base" + BUG "cannot clean $base" return $status ' diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index f5b10861c4..b8f366c442 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -227,7 +227,7 @@ EOF test_expect_success 'detect possible typos' ' test_must_fail test-tool parse-options -boolean >output 2>output.err && test_must_be_empty output && - test_cmp typo.err output.err + test_i18ncmp typo.err output.err ' cat >typo.err <<\EOF @@ -237,7 +237,7 @@ EOF test_expect_success 'detect possible typos' ' test_must_fail test-tool parse-options -ambiguous >output 2>output.err && test_must_be_empty output && - test_cmp typo.err output.err + test_i18ncmp typo.err output.err ' test_expect_success 'keep some options as arguments' ' diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index cf932c8514..96bf6d6a7d 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -13,11 +13,13 @@ cat >hello-script <<-EOF EOF test_expect_success 'start_command reports ENOENT (slash)' ' - test-tool run-command start-command-ENOENT ./does-not-exist + test-tool run-command start-command-ENOENT ./does-not-exist 2>err && + test_i18ngrep "\./does-not-exist" err ' test_expect_success 'start_command reports ENOENT (no slash)' ' - test-tool run-command start-command-ENOENT does-not-exist + test-tool run-command start-command-ENOENT does-not-exist 2>err && + test_i18ngrep "does-not-exist" err ' test_expect_success 'run_command can run a command' ' @@ -33,7 +35,8 @@ test_expect_success 'run_command is restricted to PATH' ' write_script should-not-run <<-\EOF && echo yikes EOF - test_must_fail test-tool run-command run-command should-not-run + test_must_fail test-tool run-command run-command should-not-run 2>err && + test_i18ngrep "should-not-run" err ' test_expect_success !MINGW 'run_command can run a script without a #! line' ' diff --git a/t/t0205-gettext-poison.sh b/t/t0205-gettext-poison.sh index 438e778d6a..a06269f38a 100755 --- a/t/t0205-gettext-poison.sh +++ b/t/t0205-gettext-poison.sh @@ -5,13 +5,15 @@ test_description='Gettext Shell poison' +GIT_TEST_GETTEXT_POISON=YesPlease +export GIT_TEST_GETTEXT_POISON . ./lib-gettext.sh -test_expect_success GETTEXT_POISON 'sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME" is poison' ' +test_expect_success 'sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME" is poison' ' test "$GIT_INTERNAL_GETTEXT_SH_SCHEME" = "poison" ' -test_expect_success GETTEXT_POISON 'gettext: our gettext() fallback has poison semantics' ' +test_expect_success 'gettext: our gettext() fallback has poison semantics' ' printf "# GETTEXT POISON #" >expect && gettext "test" >actual && test_cmp expect actual && @@ -20,7 +22,7 @@ test_expect_success GETTEXT_POISON 'gettext: our gettext() fallback has poison s test_cmp expect actual ' -test_expect_success GETTEXT_POISON 'eval_gettext: our eval_gettext() fallback has poison semantics' ' +test_expect_success 'eval_gettext: our eval_gettext() fallback has poison semantics' ' printf "# GETTEXT POISON #" >expect && eval_gettext "test" >actual && test_cmp expect actual && diff --git a/t/t0410-partial-clone.sh b/t/t0410-partial-clone.sh index ba3887f178..169f7f10a7 100755 --- a/t/t0410-partial-clone.sh +++ b/t/t0410-partial-clone.sh @@ -349,7 +349,7 @@ test_expect_success 'rev-list stops traversal at promisor commit, tree, and blob grep $(git -C repo rev-parse bar) out # sanity check that some walking was done ' -test_expect_success 'rev-list accepts missing and promised objects on command line' ' +test_expect_success 'rev-list dies for missing objects on cmd line' ' rm -rf repo && test_create_repo repo && test_commit -C repo foo && @@ -366,7 +366,19 @@ test_expect_success 'rev-list accepts missing and promised objects on command li git -C repo config core.repositoryformatversion 1 && git -C repo config extensions.partialclone "arbitrary string" && - git -C repo rev-list --exclude-promisor-objects --objects "$COMMIT" "$TREE" "$BLOB" + + for OBJ in "$COMMIT" "$TREE" "$BLOB"; do + test_must_fail git -C repo rev-list --objects \ + --exclude-promisor-objects "$OBJ" && + test_must_fail git -C repo rev-list --objects-edge-aggressive \ + --exclude-promisor-objects "$OBJ" && + + # Do not die or crash when --ignore-missing is passed. + git -C repo rev-list --ignore-missing --objects \ + --exclude-promisor-objects "$OBJ" && + git -C repo rev-list --ignore-missing --objects-edge-aggressive \ + --exclude-promisor-objects "$OBJ" + done ' test_expect_success 'gc repacks promisor objects separately from non-promisor objects' ' diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 3e053532eb..ae8a448e34 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -20,12 +20,12 @@ check_have () { } check_fsck () { - output=$(git fsck --full) + git fsck --full >fsck.output case "$1" in '') - test -z "$output" ;; + test_must_be_empty fsck.output ;; *) - echo "$output" | grep "$1" ;; + test_i18ngrep "$1" fsck.output ;; esac } diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index e20e8fa830..2e5e979336 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -70,7 +70,7 @@ test_expect_success 'object with bad sha1' ' test_must_fail git fsck 2>out && cat out && - grep "$sha.*corrupt" out + test_i18ngrep "$sha.*corrupt" out ' test_expect_success 'branch pointing to non-commit' ' @@ -78,7 +78,7 @@ test_expect_success 'branch pointing to non-commit' ' test_when_finished "git update-ref -d refs/heads/invalid" && test_must_fail git fsck 2>out && cat out && - grep "not a commit" out + test_i18ngrep "not a commit" out ' test_expect_success 'HEAD link pointing at a funny object' ' @@ -88,7 +88,7 @@ test_expect_success 'HEAD link pointing at a funny object' ' # avoid corrupt/broken HEAD from interfering with repo discovery test_must_fail env GIT_DIR=.git git fsck 2>out && cat out && - grep "detached HEAD points" out + test_i18ngrep "detached HEAD points" out ' test_expect_success 'HEAD link pointing at a funny place' ' @@ -98,7 +98,7 @@ test_expect_success 'HEAD link pointing at a funny place' ' # avoid corrupt/broken HEAD from interfering with repo discovery test_must_fail env GIT_DIR=.git git fsck 2>out && cat out && - grep "HEAD points to something strange" out + test_i18ngrep "HEAD points to something strange" out ' test_expect_success 'HEAD link pointing at a funny object (from different wt)' ' @@ -109,7 +109,7 @@ test_expect_success 'HEAD link pointing at a funny object (from different wt)' ' echo $ZERO_OID >.git/HEAD && # avoid corrupt/broken HEAD from interfering with repo discovery test_must_fail git -C wt fsck 2>out && - grep "main-worktree/HEAD: detached HEAD points" out + test_i18ngrep "main-worktree/HEAD: detached HEAD points" out ' test_expect_success 'other worktree HEAD link pointing at a funny object' ' @@ -117,7 +117,7 @@ test_expect_success 'other worktree HEAD link pointing at a funny object' ' git worktree add other && echo $ZERO_OID >.git/worktrees/other/HEAD && test_must_fail git fsck 2>out && - grep "worktrees/other/HEAD: detached HEAD points" out + test_i18ngrep "worktrees/other/HEAD: detached HEAD points" out ' test_expect_success 'other worktree HEAD link pointing at missing object' ' @@ -125,7 +125,7 @@ test_expect_success 'other worktree HEAD link pointing at missing object' ' git worktree add other && echo "Contents missing from repo" | git hash-object --stdin >.git/worktrees/other/HEAD && test_must_fail git fsck 2>out && - grep "worktrees/other/HEAD: invalid sha1 pointer" out + test_i18ngrep "worktrees/other/HEAD: invalid sha1 pointer" out ' test_expect_success 'other worktree HEAD link pointing at a funny place' ' @@ -133,7 +133,7 @@ test_expect_success 'other worktree HEAD link pointing at a funny place' ' git worktree add other && echo "ref: refs/funny/place" >.git/worktrees/other/HEAD && test_must_fail git fsck 2>out && - grep "worktrees/other/HEAD points to something strange" out + test_i18ngrep "worktrees/other/HEAD points to something strange" out ' test_expect_success 'email without @ is okay' ' @@ -157,7 +157,7 @@ test_expect_success 'email with embedded > is not okay' ' test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && cat out && - grep "error in commit $new" out + test_i18ngrep "error in commit $new" out ' test_expect_success 'missing < email delimiter is reported nicely' ' @@ -169,7 +169,7 @@ test_expect_success 'missing < email delimiter is reported nicely' ' test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && cat out && - grep "error in commit $new.* - bad name" out + test_i18ngrep "error in commit $new.* - bad name" out ' test_expect_success 'missing email is reported nicely' ' @@ -181,7 +181,7 @@ test_expect_success 'missing email is reported nicely' ' test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && cat out && - grep "error in commit $new.* - missing email" out + test_i18ngrep "error in commit $new.* - missing email" out ' test_expect_success '> in name is reported' ' @@ -193,7 +193,7 @@ test_expect_success '> in name is reported' ' test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && cat out && - grep "error in commit $new" out + test_i18ngrep "error in commit $new" out ' # date is 2^64 + 1 @@ -207,7 +207,7 @@ test_expect_success 'integer overflow in timestamps is reported' ' test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && cat out && - grep "error in commit $new.*integer overflow" out + test_i18ngrep "error in commit $new.*integer overflow" out ' test_expect_success 'commit with NUL in header' ' @@ -219,7 +219,7 @@ test_expect_success 'commit with NUL in header' ' test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && cat out && - grep "error in commit $new.*unterminated header: NUL at offset" out + test_i18ngrep "error in commit $new.*unterminated header: NUL at offset" out ' test_expect_success 'tree object with duplicate entries' ' @@ -240,7 +240,7 @@ test_expect_success 'tree object with duplicate entries' ' git hash-object -w -t tree --stdin ) && test_must_fail git fsck 2>out && - grep "error in tree .*contains duplicate file entries" out + test_i18ngrep "error in tree .*contains duplicate file entries" out ' test_expect_success 'unparseable tree object' ' @@ -294,7 +294,7 @@ test_expect_success 'tag pointing to nonexistent' ' test_when_finished "git update-ref -d refs/tags/invalid" && test_must_fail git fsck --tags >out && cat out && - grep "broken link" out + test_i18ngrep "broken link" out ' test_expect_success 'tag pointing to something else than its type' ' @@ -336,7 +336,7 @@ test_expect_success 'tag with incorrect tag name & missing tagger' ' warning in tag $tag: badTagName: invalid '\''tag'\'' name: wrong name format warning in tag $tag: missingTaggerEntry: invalid format - expected '\''tagger'\'' line EOF - test_cmp expect out + test_i18ncmp expect out ' test_expect_success 'tag with bad tagger' ' @@ -355,7 +355,7 @@ test_expect_success 'tag with bad tagger' ' echo $tag >.git/refs/tags/wrong && test_when_finished "git update-ref -d refs/tags/wrong" && test_must_fail git fsck --tags 2>out && - grep "error in tag .*: invalid author/committer" out + test_i18ngrep "error in tag .*: invalid author/committer" out ' test_expect_success 'tag with NUL in header' ' @@ -375,7 +375,7 @@ test_expect_success 'tag with NUL in header' ' test_when_finished "git update-ref -d refs/tags/wrong" && test_must_fail git fsck --tags 2>out && cat out && - grep "error in tag $tag.*unterminated header: NUL at offset" out + test_i18ngrep "error in tag $tag.*unterminated header: NUL at offset" out ' test_expect_success 'cleaned up' ' @@ -431,7 +431,7 @@ test_expect_success 'fsck notices blob entry pointing to null sha1' ' git hash-object -w --stdin -t tree) && git fsck 2>out && cat out && - grep "warning.*null sha1" out + test_i18ngrep "warning.*null sha1" out ) ' @@ -442,7 +442,7 @@ test_expect_success 'fsck notices submodule entry pointing to null sha1' ' git hash-object -w --stdin -t tree) && git fsck 2>out && cat out && - grep "warning.*null sha1" out + test_i18ngrep "warning.*null sha1" out ) ' @@ -463,7 +463,7 @@ while read name path pretty; do bad_tree=$(git mktree <bad) && git fsck 2>out && cat out && - grep "warning.*tree $bad_tree" out + test_i18ngrep "warning.*tree $bad_tree" out )' done <<-\EOF 100644 blob @@ -509,9 +509,9 @@ test_expect_success 'NUL in commit' ' git branch bad $(cat name) && test_must_fail git -c fsck.nulInCommit=error fsck 2>warn.1 && - grep nulInCommit warn.1 && + test_i18ngrep nulInCommit warn.1 && git fsck 2>warn.2 && - grep nulInCommit warn.2 + test_i18ngrep nulInCommit warn.2 ) ' @@ -629,7 +629,7 @@ test_expect_success 'fsck --name-objects' ' remove_object $(git rev-parse julius:caesar.t) && test_must_fail git fsck --name-objects >out && tree=$(git rev-parse --verify julius:) && - egrep "$tree \((refs/heads/master|HEAD)@\{[0-9]*\}:" out + test_i18ngrep -E "$tree \((refs/heads/master|HEAD)@\{[0-9]*\}:" out ) ' @@ -640,7 +640,7 @@ test_expect_success 'alternate objects are correctly blamed' ' mkdir alt.git/objects/12 && >alt.git/objects/12/34567890123456789012345678901234567890 && test_must_fail git fsck >out 2>&1 && - grep alt.git out + test_i18ngrep alt.git out ' test_expect_success 'fsck errors in packed objects' ' @@ -659,8 +659,8 @@ test_expect_success 'fsck errors in packed objects' ' remove_object $one && remove_object $two && test_must_fail git fsck 2>out && - grep "error in commit $one.* - bad name" out && - grep "error in commit $two.* - bad name" out && + test_i18ngrep "error in commit $one.* - bad name" out && + test_i18ngrep "error in commit $two.* - bad name" out && ! grep corrupt out ' @@ -760,7 +760,7 @@ test_expect_success 'fsck notices dangling objects' ' git fsck >actual && # the output order is non-deterministic, as it comes from a hash sort <actual >actual.sorted && - test_cmp expect actual.sorted + test_i18ncmp expect actual.sorted ) ' @@ -808,7 +808,7 @@ test_expect_success 'detect corrupt index file in fsck' ' test_when_finished "mv .git/index.backup .git/index" && corrupt_index_checksum && test_must_fail git fsck --cache 2>errors && - grep "bad index file" errors + test_i18ngrep "bad index file" errors ' test_done diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index 2ac47aa0e4..4667e1a190 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -25,14 +25,17 @@ test_expect_success 'enable split index' ' git update-index --split-index && test-tool dump-split-index .git/index >actual && indexversion=$(test-tool index-version <.git/index) && + + # NEEDSWORK: Stop hard-coding checksums. if test "$indexversion" = "4" then - own=3527df833c6c100d3d1d921a9a782d62a8be4b58 - base=746f7ab2ed44fb839efdfbffcf399d0b113fb4cb + own=432ef4b63f32193984f339431fd50ca796493569 + base=508851a7f0dfa8691e9f69c7f055865389012491 else - own=5e9b60117ece18da410ddecc8b8d43766a0e4204 - base=4370042739b31cd17a5c5cd6043a77c9a00df113 + own=8299b0bcd1ac364e5f1d7768efb62fa2da79a339 + base=39d890139ee5356c7ef572216cebcd27aa41f9df fi && + cat >expect <<-EOF && own $own base $base @@ -381,6 +384,26 @@ test_expect_success 'check splitIndex.sharedIndexExpire set to "never" and "now" test $(ls .git/sharedindex.* | wc -l) -le 2 ' +test_expect_success POSIXPERM 'same mode for index & split index' ' + git init same-mode && + ( + cd same-mode && + test_commit A && + test_modebits .git/index >index_mode && + test_must_fail git config core.sharedRepository && + git -c core.splitIndex=true status && + shared=$(ls .git/sharedindex.*) && + case "$shared" in + *" "*) + # we have more than one??? + false ;; + *) + test_modebits "$shared" >split_index_mode && + test_cmp index_mode split_index_mode ;; + esac + ) +' + while read -r mode modebits do test_expect_success POSIXPERM "split index respects core.sharedrepository $mode" ' diff --git a/t/t2024-checkout-dwim.sh b/t/t2024-checkout-dwim.sh index 69b6774d10..fa0718c730 100755 --- a/t/t2024-checkout-dwim.sh +++ b/t/t2024-checkout-dwim.sh @@ -278,4 +278,35 @@ test_expect_success 'loosely defined local base branch is reported correctly' ' test_cmp expect actual ' +test_expect_success 'reject when arg could be part of dwim branch' ' + git remote add foo file://non-existent-place && + git update-ref refs/remotes/foo/dwim-arg HEAD && + echo foo >dwim-arg && + git add dwim-arg && + echo bar >dwim-arg && + test_must_fail git checkout dwim-arg && + test_must_fail git rev-parse refs/heads/dwim-arg -- && + grep bar dwim-arg +' + +test_expect_success 'disambiguate dwim branch and checkout path (1)' ' + git update-ref refs/remotes/foo/dwim-arg1 HEAD && + echo foo >dwim-arg1 && + git add dwim-arg1 && + echo bar >dwim-arg1 && + git checkout -- dwim-arg1 && + test_must_fail git rev-parse refs/heads/dwim-arg1 -- && + grep foo dwim-arg1 +' + +test_expect_success 'disambiguate dwim branch and checkout path (2)' ' + git update-ref refs/remotes/foo/dwim-arg2 HEAD && + echo foo >dwim-arg2 && + git add dwim-arg2 && + echo bar >dwim-arg2 && + git checkout dwim-arg2 -- && + git rev-parse refs/heads/dwim-arg2 -- && + grep bar dwim-arg2 +' + test_done diff --git a/t/t3206-range-diff.sh b/t/t3206-range-diff.sh index e497c1358f..048feaf6dd 100755 --- a/t/t3206-range-diff.sh +++ b/t/t3206-range-diff.sh @@ -248,18 +248,24 @@ test_expect_success 'dual-coloring' ' for prev in topic master..topic do test_expect_success "format-patch --range-diff=$prev" ' - git format-patch --stdout --cover-letter --range-diff=$prev \ + git format-patch --cover-letter --range-diff=$prev \ master..unmodified >actual && - grep "= 1: .* s/5/A" actual && - grep "= 2: .* s/4/A" actual && - grep "= 3: .* s/11/B" actual && - grep "= 4: .* s/12/B" actual + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "= 4: .* s/12/B" 0000-* ' done test_expect_success 'format-patch --range-diff as commentary' ' - git format-patch --stdout --range-diff=HEAD~1 HEAD~1 >actual && - test_i18ngrep "^Range-diff:$" actual + git format-patch --range-diff=HEAD~1 HEAD~1 >actual && + test_when_finished "rm 0001-*" && + test_line_count = 1 actual && + test_i18ngrep "^Range-diff:$" 0001-* && + grep "> 1: .* new message" 0001-* ' test_done diff --git a/t/t3406-rebase-message.sh b/t/t3406-rebase-message.sh index 2c79eed4fe..f64b130cb8 100755 --- a/t/t3406-rebase-message.sh +++ b/t/t3406-rebase-message.sh @@ -77,7 +77,7 @@ test_expect_success 'rebase -n overrides config rebase.stat config' ' # "Does not point to a valid commit: invalid-ref" # # NEEDSWORK: This "grep" is fine in real non-C locales, but -# GETTEXT_POISON poisons the refname along with the enclosing +# GIT_TEST_GETTEXT_POISON poisons the refname along with the enclosing # error message. test_expect_success 'rebase --onto outputs the invalid ref' ' test_must_fail git rebase --onto invalid-ref HEAD HEAD 2>err && @@ -91,4 +91,40 @@ test_expect_success 'error out early upon -C<n> or --whitespace=<bad>' ' test_i18ngrep "Invalid whitespace option" err ' +test_expect_success 'GIT_REFLOG_ACTION' ' + git checkout start && + test_commit reflog-onto && + git checkout -b reflog-topic start && + test_commit reflog-to-rebase && + + git rebase reflog-onto && + git log -g --format=%gs -3 >actual && + cat >expect <<-\EOF && + rebase finished: returning to refs/heads/reflog-topic + rebase: reflog-to-rebase + rebase: checkout reflog-onto + EOF + test_cmp expect actual && + + git checkout -b reflog-prefix reflog-to-rebase && + GIT_REFLOG_ACTION=change-the-reflog git rebase reflog-onto && + git log -g --format=%gs -3 >actual && + cat >expect <<-\EOF && + rebase finished: returning to refs/heads/reflog-prefix + change-the-reflog: reflog-to-rebase + change-the-reflog: checkout reflog-onto + EOF + test_cmp expect actual +' + +test_expect_success 'rebase -i onto unrelated history' ' + git init unrelated && + test_commit -C unrelated 1 && + git -C unrelated remote add -f origin "$PWD" && + git -C unrelated branch --set-upstream-to=origin/master && + git -C unrelated -c core.editor=true rebase -i -v --stat >actual && + test_i18ngrep "Changes to " actual && + test_i18ngrep "5 files changed" actual +' + test_done diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index cd216655b9..5f8272b6f9 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -1096,4 +1096,32 @@ test_expect_success 'stash -- <subdir> works with binary files' ' test_path_is_file subdir/untracked ' +test_expect_success 'stash works when user.name and user.email are not set' ' + git reset && + >1 && + git add 1 && + echo "$GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>" >expect && + git stash && + git show -s --format="%an <%ae>" refs/stash >actual && + test_cmp expect actual && + >2 && + git add 2 && + test_config user.useconfigonly true && + test_config stash.usebuiltin true && + ( + sane_unset GIT_AUTHOR_NAME && + sane_unset GIT_AUTHOR_EMAIL && + sane_unset GIT_COMMITTER_NAME && + sane_unset GIT_COMMITTER_EMAIL && + test_unconfig user.email && + test_unconfig user.name && + test_must_fail git commit -m "should fail" && + echo "git stash <git@stash>" >expect && + >2 && + git stash && + git show -s --format="%an <%ae>" refs/stash >actual && + test_cmp expect actual + ) +' + test_done diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 73f7038253..7d985ff6b1 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -129,7 +129,7 @@ do case "$magic" in noellipses) ;; *) - die "bug in t4103: unknown magic $magic" ;; + BUG "unknown magic $magic" ;; esac ;; *) cmd="$magic $cmd" magic= diff --git a/t/t4052-stat-output.sh b/t/t4052-stat-output.sh index 6e2cf933f7..28c053849a 100755 --- a/t/t4052-stat-output.sh +++ b/t/t4052-stat-output.sh @@ -44,42 +44,50 @@ show --stat log -1 --stat EOF -while read cmd args +cat >expect.60 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +cat >expect.6030 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +cat >expect2.60 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +cat >expect2.6030 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + + ...aaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +while read expect cmd args do - cat >expect <<-'EOF' - ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + - EOF test_expect_success "$cmd --stat=width: a long name is given more room when the bar is short" ' git $cmd $args --stat=40 >output && grep " | " output >actual && - test_cmp expect actual + test_cmp $expect.60 actual ' test_expect_success "$cmd --stat-width=width with long name" ' git $cmd $args --stat-width=40 >output && grep " | " output >actual && - test_cmp expect actual + test_cmp $expect.60 actual ' - cat >expect <<-'EOF' - ...aaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + - EOF test_expect_success "$cmd --stat=...,name-width with long name" ' git $cmd $args --stat=60,30 >output && grep " | " output >actual && - test_cmp expect actual + test_cmp $expect.6030 actual ' test_expect_success "$cmd --stat-name-width with long name" ' git $cmd $args --stat-name-width=30 >output && grep " | " output >actual && - test_cmp expect actual + test_cmp $expect.6030 actual ' done <<\EOF -format-patch -1 --stdout -diff HEAD^ HEAD --stat -show --stat -log -1 --stat +expect2 format-patch --cover-letter -1 --stdout +expect diff HEAD^ HEAD --stat +expect show --stat +expect log -1 --stat EOF @@ -97,6 +105,16 @@ test_expect_success 'preparation for big change tests' ' cat >expect72 <<'EOF' abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +EOF +test_expect_success "format-patch --cover-letter ignores COLUMNS (big change)" ' + COLUMNS=200 git format-patch -1 --stdout --cover-letter >output && + grep " | " output >actual && + test_cmp expect72 actual +' + +cat >expect72 <<'EOF' + abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF cat >expect72-graph <<'EOF' | abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ diff --git a/t/t4211-line-log.sh b/t/t4211-line-log.sh index ef1322148e..bd5fe4d148 100755 --- a/t/t4211-line-log.sh +++ b/t/t4211-line-log.sh @@ -25,7 +25,7 @@ canned_test_failure () { test_bad_opts () { test_expect_success "invalid args: $1" " test_must_fail git log $1 2>errors && - grep '$2' errors + test_i18ngrep '$2' errors " } diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index d2a2cdd453..883b32efa0 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -1222,4 +1222,59 @@ test_expect_success 'add remote matching the "insteadOf" URL' ' git remote add backup xyz@example.com ' +test_expect_success 'unqualified <dst> refspec DWIM and advice' ' + test_when_finished "(cd test && git tag -d some-tag)" && + ( + cd test && + git tag -a -m "Some tag" some-tag master && + exit_with=true && + for type in commit tag tree blob + do + if test "$type" = "blob" + then + oid=$(git rev-parse some-tag:file) + else + oid=$(git rev-parse some-tag^{$type}) + fi && + test_must_fail git push origin $oid:dst 2>err && + test_i18ngrep "error: The destination you" err && + test_i18ngrep "hint: Did you mean" err && + test_must_fail git -c advice.pushUnqualifiedRefName=false \ + push origin $oid:dst 2>err && + test_i18ngrep "error: The destination you" err && + test_i18ngrep ! "hint: Did you mean" err || + exit_with=false + done && + $exit_with + ) +' + +test_expect_success 'refs/remotes/* <src> refspec and unqualified <dst> DWIM and advice' ' + ( + cd two && + git tag -a -m "Some tag" my-tag master && + git update-ref refs/trees/my-head-tree HEAD^{tree} && + git update-ref refs/blobs/my-file-blob HEAD:file + ) && + ( + cd test && + git config --add remote.two.fetch "+refs/tags/*:refs/remotes/tags-from-two/*" && + git config --add remote.two.fetch "+refs/trees/*:refs/remotes/trees-from-two/*" && + git config --add remote.two.fetch "+refs/blobs/*:refs/remotes/blobs-from-two/*" && + git fetch --no-tags two && + + test_must_fail git push origin refs/remotes/two/another:dst 2>err && + test_i18ngrep "error: The destination you" err && + + test_must_fail git push origin refs/remotes/tags-from-two/my-tag:dst-tag 2>err && + test_i18ngrep "error: The destination you" err && + + test_must_fail git push origin refs/remotes/trees-from-two/my-head-tree:dst-tree 2>err && + test_i18ngrep "error: The destination you" err && + + test_must_fail git push origin refs/remotes/blobs-from-two/my-file-blob:dst-blob 2>err && + test_i18ngrep "error: The destination you" err + ) +' + test_done diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 7316365a24..37e8e80893 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -95,7 +95,7 @@ mk_child() { check_push_result () { test $# -ge 3 || - error "bug in the test script: check_push_result requires at least 3 parameters" + BUG "check_push_result requires at least 3 parameters" repo_name="$1" shift diff --git a/t/t5562-http-backend-content-length.sh b/t/t5562-http-backend-content-length.sh index b24d8b05a4..90d890d02f 100755 --- a/t/t5562-http-backend-content-length.sh +++ b/t/t5562-http-backend-content-length.sh @@ -31,6 +31,7 @@ test_http_env() { PATH_TRANSLATED="$PWD/.git/git-$handler_type-pack" \ GIT_HTTP_EXPORT_ALL=TRUE \ REQUEST_METHOD=POST \ + "$PERL_PATH" \ "$TEST_DIRECTORY"/t5562/invoke-with-content-length.pl \ "$request_body" git http-backend >act.out 2>act.err } diff --git a/t/t5562/invoke-with-content-length.pl b/t/t5562/invoke-with-content-length.pl index 6c2aae7692..0943474af2 100755..100644 --- a/t/t5562/invoke-with-content-length.pl +++ b/t/t5562/invoke-with-content-length.pl @@ -1,4 +1,3 @@ -#!/usr/bin/perl use 5.008; use strict; use warnings; diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index f1a49e94f5..8bbc7068ac 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -628,7 +628,7 @@ test_expect_success 'clone on case-insensitive fs' ' ) ' -test_expect_success !MINGW,!CYGWIN,CASE_INSENSITIVE_FS 'colliding file detection' ' +test_expect_success CASE_INSENSITIVE_FS 'colliding file detection' ' grep X icasefs/warning && grep x icasefs/warning && test_i18ngrep "the following paths have collided" icasefs/warning diff --git a/t/t5611-clone-config.sh b/t/t5611-clone-config.sh index 39329eb7a8..60c1ba951b 100755 --- a/t/t5611-clone-config.sh +++ b/t/t5611-clone-config.sh @@ -45,6 +45,53 @@ test_expect_success 'clone -c config is available during clone' ' test_cmp expect child/file ' +test_expect_success 'clone -c remote.origin.fetch=<refspec> works' ' + rm -rf child && + git update-ref refs/grab/it refs/heads/master && + git update-ref refs/leave/out refs/heads/master && + git clone -c "remote.origin.fetch=+refs/grab/*:refs/grab/*" . child && + git -C child for-each-ref --format="%(refname)" >actual && + + cat >expect <<-\EOF && + refs/grab/it + refs/heads/master + refs/remotes/origin/HEAD + refs/remotes/origin/master + EOF + test_cmp expect actual +' + +test_expect_success 'git -c remote.origin.fetch=<refspec> clone works' ' + rm -rf child && + git -c "remote.origin.fetch=+refs/grab/*:refs/grab/*" clone . child && + git -C child for-each-ref --format="%(refname)" >actual && + + cat >expect <<-\EOF && + refs/grab/it + refs/heads/master + refs/remotes/origin/HEAD + refs/remotes/origin/master + EOF + test_cmp expect actual +' + +test_expect_success 'clone -c remote.<remote>.fetch=<refspec> --origin=<name>' ' + rm -rf child && + git clone --origin=upstream \ + -c "remote.upstream.fetch=+refs/grab/*:refs/grab/*" \ + -c "remote.origin.fetch=+refs/leave/*:refs/leave/*" \ + . child && + git -C child for-each-ref --format="%(refname)" >actual && + + cat >expect <<-\EOF && + refs/grab/it + refs/heads/master + refs/remotes/upstream/HEAD + refs/remotes/upstream/master + EOF + test_cmp expect actual +' + # Tests for the hidden file attribute on windows is_hidden () { # Use the output of `attrib`, ignore the absolute path diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh index 336f02a41a..9643acb161 100755 --- a/t/t5616-partial-clone.sh +++ b/t/t5616-partial-clone.sh @@ -281,7 +281,7 @@ test_expect_success 'upon cloning, check that all refs point to objects' ' test_must_fail git -c protocol.version=2 clone \ --filter=blob:none $HTTPD_URL/one_time_sed/server repo 2>err && - grep "did not send all necessary objects" err && + test_i18ngrep "did not send all necessary objects" err && # Ensure that the one-time-sed script was used. ! test -e "$HTTPD_ROOT_PATH/one-time-sed" diff --git a/t/t5703-upload-pack-ref-in-want.sh b/t/t5703-upload-pack-ref-in-want.sh index 3f58f05cbb..7053899cb5 100755 --- a/t/t5703-upload-pack-ref-in-want.sh +++ b/t/t5703-upload-pack-ref-in-want.sh @@ -208,7 +208,7 @@ test_expect_success 'server is initially ahead - no ref in want' ' cp -r "$LOCAL_PRISTINE" local && inconsistency master 1234567890123456789012345678901234567890 && test_must_fail git -C local fetch 2>err && - grep "ERR upload-pack: not our ref" err + test_i18ngrep "ERR upload-pack: not our ref" err ' test_expect_success 'server is initially ahead - ref in want' ' @@ -254,7 +254,7 @@ test_expect_success 'server loses a ref - ref in want' ' echo "s/master/raster/" >"$HTTPD_ROOT_PATH/one-time-sed" && test_must_fail git -C local fetch 2>err && - grep "ERR unknown ref refs/heads/raster" err + test_i18ngrep "ERR unknown ref refs/heads/raster" err ' stop_httpd diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index e1cef58f2a..d23b948f27 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -64,15 +64,12 @@ test_expect_success 'merge simple rename+criss-cross with no modifications' ' git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >expect \ - L2:three R2:three \ L2:three R2:three && git rev-parse >actual \ :2:three :3:three && - git hash-object >>actual \ - three~HEAD three~R2^0 && test_cmp expect actual ) ' @@ -140,15 +137,12 @@ test_expect_success 'merge criss-cross + rename merges with basic modification' git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >expect \ - L2:three R2:three \ L2:three R2:three && git rev-parse >actual \ :2:three :3:three && - git hash-object >>actual \ - three~HEAD three~R2^0 && test_cmp expect actual ) ' @@ -185,7 +179,7 @@ test_expect_success 'setup differently handled merges of rename/add conflict' ' git branch B && git checkout -b C && echo 10 >>a && - echo "other content" >>new_a && + test_write_lines 0 1 2 3 4 5 6 7 foobar >new_a && git add a new_a && test_tick && git commit -m C && @@ -195,14 +189,14 @@ test_expect_success 'setup differently handled merges of rename/add conflict' ' git checkout B^0 && test_must_fail git merge C && - git clean -f && + git show :2:new_a >new_a && + git add new_a && test_tick && git commit -m D && git tag D && git checkout C^0 && test_must_fail git merge B && - rm new_a~HEAD new_a && - printf "Incorrectly merged content" >>new_a && + test_write_lines 0 1 2 3 4 5 6 7 bad_merge >new_a && git add -u && test_tick && git commit -m E && git tag E @@ -225,21 +219,74 @@ test_expect_success 'git detects differently handled merges conflict' ' test_line_count = 1 out && git rev-parse >expect \ - D:new_a E:new_a && + C:new_a D:new_a E:new_a && git rev-parse >actual \ - :2:new_a :3:new_a && + :1:new_a :2:new_a :3:new_a && test_cmp expect actual && - git cat-file -p C:new_a >ours && - git cat-file -p B:new_a >theirs && + # Test that the two-way merge in new_a is as expected + git cat-file -p D:new_a >ours && + git cat-file -p E:new_a >theirs && >empty && test_must_fail git merge-file \ - -L "Temporary merge branch 1" \ + -L "HEAD" \ -L "" \ - -L "Temporary merge branch 2" \ + -L "E^0" \ ours empty theirs && sed -e "s/^\([<=>]\)/\1\1\1/" ours >expect && - git cat-file -p :1:new_a >actual && + git hash-object new_a >actual && + git hash-object ours >expect && + test_cmp expect actual + ) +' + +# Repeat the above testcase with precisely the same setup, other than with +# the two merge bases having different orderings of commit timestamps so +# that they are reversed in the order they are provided to merge-recursive, +# so that we can improve code coverage. +test_expect_success 'git detects differently handled merges conflict, swapped' ' + ( + cd rename-add && + + # Difference #1: Do cleanup from previous testrun + git reset --hard && + git clean -fdqx && + + # Difference #2: Change commit timestamps + btime=$(git log --no-walk --date=raw --format=%cd B | awk "{print \$1}") && + ctime=$(git log --no-walk --date=raw --format=%cd C | awk "{print \$1}") && + newctime=$(($btime+1)) && + git fast-export --no-data --all | sed -e s/$ctime/$newctime/ | git fast-import --force --quiet && + # End of differences; rest is copy-paste of last test + + git checkout D^0 && + test_must_fail git merge -s recursive E^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + C:new_a D:new_a E:new_a && + git rev-parse >actual \ + :1:new_a :2:new_a :3:new_a && + test_cmp expect actual && + + # Test that the two-way merge in new_a is as expected + git cat-file -p D:new_a >ours && + git cat-file -p E:new_a >theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "E^0" \ + ours empty theirs && + sed -e "s/^\([<=>]\)/\1\1\1/" ours >expect && + git hash-object new_a >actual && + git hash-object ours >expect && test_cmp expect actual ) ' @@ -1402,4 +1449,349 @@ test_expect_failure 'check conflicting modes for regular file' ' ) ' +# Setup: +# L1---L2 +# / \ / \ +# master X ? +# \ / \ / +# R1---R2 +# +# Where: +# master has two files, named 'b' and 'a' +# branches L1 and R1 both modify each of the two files in conflicting ways +# +# L2 is a merge of R1 into L1; more on it later. +# R2 is a merge of L1 into R1; more on it later. +# +# X is an auto-generated merge-base used when merging L2 and R2. +# since X is a merge of L1 and R1, it has conflicting versions of each file +# +# More about L2 and R2: +# - both resolve the conflicts in 'b' and 'a' differently +# - L2 renames 'b' to 'm' +# - R2 renames 'a' to 'm' +# +# In the end, in file 'm' we have four different conflicting files (from +# two versions of 'b' and two of 'a'). In addition, if +# merge.conflictstyle is diff3, then the base version also has +# conflict markers of its own, leading to a total of three levels of +# conflict markers. This is a pretty weird corner case, but we just want +# to ensure that we handle it as well as practical. + +test_expect_success 'setup nested conflicts' ' + test_create_repo nested_conflicts && + ( + cd nested_conflicts && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >initial && + + cp initial b_L1 && + cp initial b_R1 && + cp initial b_L2 && + cp initial b_R2 && + cp initial a_L1 && + cp initial a_R1 && + cp initial a_L2 && + cp initial a_R2 && + + test_write_lines b b_L1 >>b_L1 && + test_write_lines b b_R1 >>b_R1 && + test_write_lines b b_L2 >>b_L2 && + test_write_lines b b_R2 >>b_R2 && + test_write_lines a a_L1 >>a_L1 && + test_write_lines a a_R1 >>a_R1 && + test_write_lines a a_L2 >>a_L2 && + test_write_lines a a_R2 >>a_R2 && + + # Setup original commit (or merge-base), consisting of + # files named "b" and "a" + cp initial b && + cp initial a && + echo b >>b && + echo a >>a && + git add b a && + test_tick && git commit -m initial && + + git branch L && + git branch R && + + # Handle the left side + git checkout L && + mv -f b_L1 b && + mv -f a_L1 a && + git add b a && + test_tick && git commit -m "version L1 of files" && + git tag L1 && + + # Handle the right side + git checkout R && + mv -f b_R1 b && + mv -f a_R1 a && + git add b a && + test_tick && git commit -m "verson R1 of files" && + git tag R1 && + + # Create first merge on left side + git checkout L && + test_must_fail git merge R1 && + mv -f b_L2 b && + mv -f a_L2 a && + git add b a && + git mv b m && + test_tick && git commit -m "left merge, rename b->m" && + git tag L2 && + + # Create first merge on right side + git checkout R && + test_must_fail git merge L1 && + mv -f b_R2 b && + mv -f a_R2 a && + git add b a && + git mv a m && + test_tick && git commit -m "right merge, rename a->m" && + git tag R2 + ) +' + +test_expect_success 'check nested conflicts' ' + ( + cd nested_conflicts && + + git clean -f && + git checkout L2^0 && + + # Merge must fail; there is a conflict + test_must_fail git -c merge.conflictstyle=diff3 merge -s recursive R2^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Create a and b from virtual merge base X + git cat-file -p master:a >base && + git cat-file -p L1:a >ours && + git cat-file -p R1:a >theirs && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "merged common ancestors" \ + -L "Temporary merge branch 2" \ + ours \ + base \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >vmb_a && + + git cat-file -p master:b >base && + git cat-file -p L1:b >ours && + git cat-file -p R1:b >theirs && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "merged common ancestors" \ + -L "Temporary merge branch 2" \ + ours \ + base \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >vmb_b && + + # Compare :2:m to expected values + git cat-file -p L2:m >ours && + git cat-file -p R2:b >theirs && + test_must_fail git merge-file --diff3 \ + -L "HEAD:m" \ + -L "merged common ancestors:b" \ + -L "R2^0:b" \ + ours \ + vmb_b \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >m_stage_2 && + git cat-file -p :2:m >actual && + test_cmp m_stage_2 actual && + + # Compare :3:m to expected values + git cat-file -p L2:a >ours && + git cat-file -p R2:m >theirs && + test_must_fail git merge-file --diff3 \ + -L "HEAD:a" \ + -L "merged common ancestors:a" \ + -L "R2^0:m" \ + ours \ + vmb_a \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >m_stage_3 && + git cat-file -p :3:m >actual && + test_cmp m_stage_3 actual && + + # Compare m to expected contents + >empty && + cp m_stage_2 expected_final_m && + test_must_fail git merge-file --diff3 \ + -L "HEAD" \ + -L "merged common ancestors" \ + -L "R2^0" \ + expected_final_m \ + empty \ + m_stage_3 && + test_cmp expected_final_m m + ) +' + +# Setup: +# L1---L2---L3 +# / \ / \ / \ +# master X1 X2 ? +# \ / \ / \ / +# R1---R2---R3 +# +# Where: +# master has one file named 'content' +# branches L1 and R1 both modify each of the two files in conflicting ways +# +# L<n> (n>1) is a merge of R<n-1> into L<n-1> +# R<n> (n>1) is a merge of L<n-1> into R<n-1> +# L<n> and R<n> resolve the conflicts differently. +# +# X<n> is an auto-generated merge-base used when merging L<n+1> and R<n+1>. +# By construction, X1 has conflict markers due to conflicting versions. +# X2, due to using merge.conflictstyle=3, has nested conflict markers. +# +# So, merging R3 into L3 using merge.conflictstyle=3 should show the +# nested conflict markers from X2 in the base version -- that means we +# have three levels of conflict markers. Can we distinguish all three? + +test_expect_success 'setup virtual merge base with nested conflicts' ' + test_create_repo virtual_merge_base_has_nested_conflicts && + ( + cd virtual_merge_base_has_nested_conflicts && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >content && + + # Setup original commit + git add content && + test_tick && git commit -m initial && + + git branch L && + git branch R && + + # Create L1 + git checkout L && + echo left >>content && + git add content && + test_tick && git commit -m "version L1 of content" && + git tag L1 && + + # Create R1 + git checkout R && + echo right >>content && + git add content && + test_tick && git commit -m "verson R1 of content" && + git tag R1 && + + # Create L2 + git checkout L && + test_must_fail git -c merge.conflictstyle=diff3 merge R1 && + git checkout L1 content && + test_tick && git commit -m "version L2 of content" && + git tag L2 && + + # Create R2 + git checkout R && + test_must_fail git -c merge.conflictstyle=diff3 merge L1 && + git checkout R1 content && + test_tick && git commit -m "version R2 of content" && + git tag R2 && + + # Create L3 + git checkout L && + test_must_fail git -c merge.conflictstyle=diff3 merge R2 && + git checkout L1 content && + test_tick && git commit -m "version L3 of content" && + git tag L3 && + + # Create R3 + git checkout R && + test_must_fail git -c merge.conflictstyle=diff3 merge L2 && + git checkout R1 content && + test_tick && git commit -m "version R3 of content" && + git tag R3 + ) +' + +test_expect_success 'check virtual merge base with nested conflicts' ' + ( + cd virtual_merge_base_has_nested_conflicts && + + git checkout L3^0 && + + # Merge must fail; there is a conflict + test_must_fail git -c merge.conflictstyle=diff3 merge -s recursive R3^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Compare :[23]:content to expected values + git rev-parse L1:content R1:content >expect && + git rev-parse :2:content :3:content >actual && + test_cmp expect actual && + + # Imitate X1 merge base, except without long enough conflict + # markers because a subsequent sed will modify them. Put + # result into vmb. + git cat-file -p master:content >base && + git cat-file -p L:content >left && + git cat-file -p R:content >right && + cp left merged-once && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "merged common ancestors" \ + -L "Temporary merge branch 2" \ + merged-once \ + base \ + right && + sed -e "s/^\([<|=>]\)/\1\1\1/" merged-once >vmb && + + # Imitate X2 merge base, overwriting vmb. Note that we + # extend both sets of conflict markers to make them longer + # with the sed command. + cp left merged-twice && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "merged common ancestors" \ + -L "Temporary merge branch 2" \ + merged-twice \ + vmb \ + right && + sed -e "s/^\([<|=>]\)/\1\1\1/" merged-twice >vmb && + + # Compare :1:content to expected value + git cat-file -p :1:content >actual && + test_cmp vmb actual && + + # Determine expected content in final outer merge, compare to + # what the merge generated. + cp -f left expect && + test_must_fail git merge-file --diff3 \ + -L "HEAD" -L "merged common ancestors" -L "R3^0" \ + expect vmb right && + test_cmp expect content + ) +' + test_done diff --git a/t/t6042-merge-rename-corner-cases.sh b/t/t6042-merge-rename-corner-cases.sh index b97aca7fa2..7cc34e7579 100755 --- a/t/t6042-merge-rename-corner-cases.sh +++ b/t/t6042-merge-rename-corner-cases.sh @@ -464,17 +464,28 @@ test_expect_success 'handle rename/rename (2to1) conflict correctly' ' git ls-files -u c >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && test_path_is_missing a && test_path_is_missing b && - test_path_is_file c~HEAD && - test_path_is_file c~C^0 && - git rev-parse >expect \ - C:a B:b && - git hash-object >actual \ - c~HEAD c~C^0 && + git rev-parse >expect \ + C:a B:b && + git rev-parse >actual \ + :2:c :3:c && + test_cmp expect actual && + + # Test that the two-way merge in new_a is as expected + git cat-file -p :2:c >>ours && + git cat-file -p :3:c >>theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "C^0" \ + ours empty theirs && + git hash-object c >actual && + git hash-object ours >expect && test_cmp expect actual ) ' @@ -673,7 +684,7 @@ test_expect_success 'rename/rename/add-dest merge still knows about conflicting git ls-files -u c >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 5 out && + test_line_count = 1 out && git rev-parse >expect \ A:a C:b B:b C:c B:c && @@ -681,14 +692,27 @@ test_expect_success 'rename/rename/add-dest merge still knows about conflicting :1:a :2:b :3:b :2:c :3:c && test_cmp expect actual && - git rev-parse >expect \ - C:c B:c C:b B:b && - git hash-object >actual \ - c~HEAD c~B\^0 b~HEAD b~B\^0 && - test_cmp expect actual && + # Record some contents for re-doing merges + git cat-file -p A:a >stuff && + git cat-file -p C:b >important_info && + git cat-file -p B:c >precious_data && + >empty && - test_path_is_missing b && - test_path_is_missing c + # Test the merge in b + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + important_info empty stuff && + test_cmp important_info b && + + # Test the merge in c + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + stuff empty precious_data && + test_cmp stuff c ) ' @@ -937,4 +961,283 @@ test_expect_failure 'mod6-check: chains of rename/rename(1to2) and rename/rename ) ' +test_conflicts_with_adds_and_renames() { + sideL=$1 + sideR=$2 + + # Setup: + # L + # / \ + # master ? + # \ / + # R + # + # Where: + # Both L and R have files named 'three' which collide. Each of + # the colliding files could have been involved in a rename, in + # which case there was a file named 'one' or 'two' that was + # modified on the opposite side of history and renamed into the + # collision on this side of history. + # + # Questions: + # 1) The index should contain both a stage 2 and stage 3 entry + # for the colliding file. Does it? + # 2) When renames are involved, the content merges are clean, so + # the index should reflect the content merges, not merely the + # version of the colliding file from the prior commit. Does + # it? + # 3) There should be a file in the worktree named 'three' + # containing the two-way merged contents of the content-merged + # versions of 'three' from each of the two colliding + # files. Is it present? + # 4) There should not be any three~* files in the working + # tree + test_expect_success "setup simple $sideL/$sideR conflict" ' + test_create_repo simple_${sideL}_${sideR} && + ( + cd simple_${sideL}_${sideR} && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >file_v1 && + cp file_v1 file_v2 && + echo modification >>file_v2 && + + cp file_v1 file_v3 && + echo more stuff >>file_v3 && + cp file_v3 file_v4 && + echo yet more stuff >>file_v4 && + + # Use a tag to record both these files for simple + # access, and clean out these untracked files + git tag file_v1 $(git hash-object -w file_v1) && + git tag file_v2 $(git hash-object -w file_v2) && + git tag file_v3 $(git hash-object -w file_v3) && + git tag file_v4 $(git hash-object -w file_v4) && + git clean -f && + + # Setup original commit (or merge-base), consisting of + # files named "one" and "two" if renames were involved. + touch irrelevant_file && + git add irrelevant_file && + if [ $sideL = "rename" ] + then + git show file_v1 >one && + git add one + fi && + if [ $sideR = "rename" ] + then + git show file_v3 >two && + git add two + fi && + test_tick && git commit -m initial && + + git branch L && + git branch R && + + # Handle the left side + git checkout L && + if [ $sideL = "rename" ] + then + git mv one three + else + git show file_v2 >three && + git add three + fi && + if [ $sideR = "rename" ] + then + git show file_v4 >two && + git add two + fi && + test_tick && git commit -m L && + + # Handle the right side + git checkout R && + if [ $sideL = "rename" ] + then + git show file_v2 >one && + git add one + fi && + if [ $sideR = "rename" ] + then + git mv two three + else + git show file_v4 >three && + git add three + fi && + test_tick && git commit -m R + ) + ' + + test_expect_success "check simple $sideL/$sideR conflict" ' + ( + cd simple_${sideL}_${sideR} && + + git checkout L^0 && + + # Merge must fail; there is a conflict + test_must_fail git merge -s recursive R^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 2 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Nothing should have touched irrelevant_file + git rev-parse >actual \ + :0:irrelevant_file \ + :2:three \ + :3:three && + git rev-parse >expected \ + master:irrelevant_file \ + file_v2 \ + file_v4 && + test_cmp expected actual && + + # Make sure we have the correct merged contents for + # three + git show file_v1 >expected && + cat <<-\EOF >>expected && + <<<<<<< HEAD + modification + ======= + more stuff + yet more stuff + >>>>>>> R^0 + EOF + + test_cmp expected three + ) + ' +} + +test_conflicts_with_adds_and_renames rename rename +test_conflicts_with_adds_and_renames rename add +test_conflicts_with_adds_and_renames add rename +test_conflicts_with_adds_and_renames add add + +# Setup: +# L +# / \ +# master ? +# \ / +# R +# +# Where: +# master has two files, named 'one' and 'two'. +# branches L and R both modify 'one', in conflicting ways. +# branches L and R both modify 'two', in conflicting ways. +# branch L also renames 'one' to 'three'. +# branch R also renames 'two' to 'three'. +# +# So, we have four different conflicting files that all end up at path +# 'three'. +test_expect_success 'setup nested conflicts from rename/rename(2to1)' ' + test_create_repo nested_conflicts_from_rename_rename && + ( + cd nested_conflicts_from_rename_rename && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >file_v1 && + + cp file_v1 file_v2 && + cp file_v1 file_v3 && + cp file_v1 file_v4 && + cp file_v1 file_v5 && + cp file_v1 file_v6 && + + echo one >>file_v1 && + echo uno >>file_v2 && + echo eins >>file_v3 && + + echo two >>file_v4 && + echo dos >>file_v5 && + echo zwei >>file_v6 && + + # Setup original commit (or merge-base), consisting of + # files named "one" and "two". + mv file_v1 one && + mv file_v4 two && + git add one two && + test_tick && git commit -m english && + + git branch L && + git branch R && + + # Handle the left side + git checkout L && + git mv one three && + mv -f file_v2 three && + mv -f file_v5 two && + git add two three && + test_tick && git commit -m spanish && + + # Handle the right side + git checkout R && + git mv two three && + mv -f file_v3 one && + mv -f file_v6 three && + git add one three && + test_tick && git commit -m german + ) +' + +test_expect_success 'check nested conflicts from rename/rename(2to1)' ' + ( + cd nested_conflicts_from_rename_rename && + + git checkout L^0 && + + # Merge must fail; there is a conflict + test_must_fail git merge -s recursive R^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Compare :2:three to expected values + git cat-file -p master:one >base && + git cat-file -p L:three >ours && + git cat-file -p R:one >theirs && + test_must_fail git merge-file \ + -L "HEAD:three" -L "" -L "R^0:one" \ + ours base theirs && + sed -e "s/^\([<=>]\)/\1\1/" ours >L-three && + git cat-file -p :2:three >expect && + test_cmp expect L-three && + + # Compare :2:three to expected values + git cat-file -p master:two >base && + git cat-file -p L:two >ours && + git cat-file -p R:three >theirs && + test_must_fail git merge-file \ + -L "HEAD:two" -L "" -L "R^0:three" \ + ours base theirs && + sed -e "s/^\([<=>]\)/\1\1/" ours >R-three && + git cat-file -p :3:three >expect && + test_cmp expect R-three && + + # Compare three to expected contents + >empty && + test_must_fail git merge-file \ + -L "HEAD" -L "" -L "R^0" \ + L-three empty R-three && + test_cmp three L-three + ) +' + test_done diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh index 4a71f17edd..62c564707b 100755 --- a/t/t6043-merge-rename-directories.sh +++ b/t/t6043-merge-rename-directories.sh @@ -278,7 +278,7 @@ test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) con git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >actual \ :0:x/b :0:x/c :0:x/d :0:x/e :0:x/m :0:x/n && @@ -293,15 +293,16 @@ test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) con A:y/wham B:z/wham && test_cmp expect actual && - test_path_is_missing x/wham && - test_path_is_file x/wham~HEAD && - test_path_is_file x/wham~B^0 && - - git hash-object >actual \ - x/wham~HEAD x/wham~B^0 && - git rev-parse >expect \ - A:y/wham B:z/wham && - test_cmp expect actual + # Test that the two-way merge in x/wham is as expected + git cat-file -p :2:x/wham >expect && + git cat-file -p :3:x/wham >other && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + expect empty other && + test_cmp expect x/wham ) ' @@ -1077,7 +1078,7 @@ test_expect_success '5c-check: Transitive rename would cause rename/rename/renam git ls-files -u >out && test_line_count = 6 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >actual \ :0:y/b :0:y/c :0:y/e && @@ -1093,9 +1094,9 @@ test_expect_success '5c-check: Transitive rename would cause rename/rename/renam test_cmp expect actual && git hash-object >actual \ - w/d~HEAD w/d~B^0 z/d && + z/d && git rev-parse >expect \ - O:x/d B:w/d O:x/d && + O:x/d && test_cmp expect actual && test_path_is_missing x/d && test_path_is_file y/d && @@ -1670,7 +1671,7 @@ test_expect_success '7b-check: rename/rename(2to1), but only due to transitive r git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >actual \ :0:y/b :0:y/c :2:y/d :3:y/d && @@ -1678,15 +1679,16 @@ test_expect_success '7b-check: rename/rename(2to1), but only due to transitive r O:z/b O:z/c O:w/d O:x/d && test_cmp expect actual && - test_path_is_missing y/d && - test_path_is_file y/d~HEAD && - test_path_is_file y/d~B^0 && - - git hash-object >actual \ - y/d~HEAD y/d~B^0 && - git rev-parse >expect \ - O:w/d O:x/d && - test_cmp expect actual + # Test that the two-way merge in y/d is as expected + git cat-file -p :2:y/d >expect && + git cat-file -p :3:y/d >other && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + expect empty other && + test_cmp expect y/d ) ' @@ -3161,11 +3163,48 @@ test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2) ) ' +test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2), other direction' ' + ( + cd 10c && + + git reset --hard && + git clean -fdqx && + + git checkout B^0 && + mkdir y && + echo important >y/c && + + test_must_fail git merge -s recursive A^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose untracked file at y/c; adding as y/c~HEAD instead" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:x/d :1:x/c :3:w/c :2:y/c && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/c O:x/c O:x/c && + test_cmp expect actual && + + git hash-object y/c~HEAD >actual && + git rev-parse O:x/c >expect && + test_cmp expect actual && + + echo important >expect && + test_cmp expect y/c + ) +' + # Testcase 10d, Delete untracked w/ dir rename/rename(2to1) # Commit O: z/{a,b,c_1}, x/{d,e,f_2} # Commit A: y/{a,b}, x/{d,e,f_2,wham_1} + untracked y/wham # Commit B: z/{a,b,c_1,wham_2}, y/{d,e} -# Expected: Failed Merge; y/{a,b,d,e} + untracked y/{wham,wham~B^0,wham~HEAD}+ +# Expected: Failed Merge; y/{a,b,d,e} + untracked y/{wham,wham~merged}+ # CONFLICT(rename/rename) z/c_1 vs x/f_2 -> y/wham # ERROR_MSG(Refusing to lose untracked file at y/wham) @@ -3219,7 +3258,7 @@ test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 4 out && + test_line_count = 3 out && git rev-parse >actual \ :0:y/a :0:y/b :0:y/d :0:y/e :2:y/wham :3:y/wham && @@ -3232,11 +3271,16 @@ test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' echo important >expect && test_cmp expect y/wham && - git hash-object >actual \ - y/wham~B^0 y/wham~HEAD && - git rev-parse >expect \ - O:x/f O:z/c && - test_cmp expect actual + # Test that the two-way merge in y/wham~merged is as expected + git cat-file -p :2:y/wham >expect && + git cat-file -p :3:y/wham >other && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + expect empty other && + test_cmp expect y/wham~merged ) ' @@ -3665,7 +3709,7 @@ test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rena git ls-files -u >out && test_line_count = 4 out && git ls-files -o >out && - test_line_count = 4 out && + test_line_count = 3 out && echo different >expected && echo mods >>expected && @@ -3677,11 +3721,17 @@ test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rena O:z/a O:z/b O:x/d O:x/c O:x/c A:y/c O:x/c && test_cmp expect actual && - git hash-object >actual \ - y/c~B^0 y/c~HEAD && - git rev-parse >expect \ - O:x/c A:y/c && - test_cmp expect actual + # See if y/c~merged has expected contents; requires manually + # doing the expected file merge + git cat-file -p A:y/c >c1 && + git cat-file -p B:z/c >c2 && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + c1 empty c2 && + test_cmp c1 y/c~merged ) ' @@ -3689,7 +3739,7 @@ test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rena # Commit O: z/{a,b}, x/{c_1,d_2} # Commit A: y/{a,b,wham_1}, x/d_2, except y/wham has uncommitted mods # Commit B: z/{a,b,wham_2}, x/c_1 -# Expected: Failed Merge; y/{a,b} + untracked y/{wham~B^0,wham~B^HEAD} + +# Expected: Failed Merge; y/{a,b} + untracked y/{wham~merged} + # y/wham with dirty changes from before merge + # CONFLICT(rename/rename) x/c vs x/d -> y/wham # ERROR_MSG(Refusing to lose dirty file at y/wham) @@ -3741,24 +3791,30 @@ test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rena git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 4 out && + test_line_count = 3 out && test_seq 1 10 >expected && echo important >>expected && test_cmp expected y/wham && test_must_fail git rev-parse :1:y/wham && - git hash-object >actual \ - y/wham~B^0 y/wham~HEAD && - git rev-parse >expect \ - O:x/d O:x/c && - test_cmp expect actual && git rev-parse >actual \ :0:y/a :0:y/b :2:y/wham :3:y/wham && git rev-parse >expect \ O:z/a O:z/b O:x/c O:x/d && - test_cmp expect actual + test_cmp expect actual && + + # Test that the two-way merge in y/wham~merged is as expected + git cat-file -p :2:y/wham >expect && + git cat-file -p :3:y/wham >other && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + expect empty other && + test_cmp expect y/wham~merged ) ' diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index 86374a9c52..d638119750 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -133,8 +133,8 @@ test_expect_success 'tag replaced commit' ' test_expect_success '"git fsck" works' ' git fsck master >fsck_master.out && - grep "dangling commit $R" fsck_master.out && - grep "dangling tag $(cat .git/refs/tags/mytag)" fsck_master.out && + test_i18ngrep "dangling commit $R" fsck_master.out && + test_i18ngrep "dangling tag $(cat .git/refs/tags/mytag)" fsck_master.out && test -z "$(git fsck)" ' @@ -461,7 +461,10 @@ test_expect_success '--convert-graft-file' ' printf "%s\n%s %s\n\n# comment\n%s\n" \ $(git rev-parse HEAD^^ HEAD^ HEAD^^ HEAD^2) \ >.git/info/grafts && - git replace --convert-graft-file && + git status 2>stderr && + test_i18ngrep "hint:.*grafts is deprecated" stderr && + git replace --convert-graft-file 2>stderr && + test_i18ngrep ! "hint:.*grafts is deprecated" stderr && test_path_is_missing .git/info/grafts && : verify that the history is now "grafted" && diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 826987ca80..72b9b375ba 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -254,9 +254,9 @@ test_expect_success 'checkout to detach HEAD (with advice declined)' ' test_expect_success 'checkout to detach HEAD' ' git config advice.detachedHead true && git checkout -f renamer && git clean -f && - git checkout renamer^ 2>messages && - test_i18ngrep "HEAD is now at 7329388" messages && - (test_line_count -gt 1 messages || test -n "$GETTEXT_POISON") && + GIT_TEST_GETTEXT_POISON= git checkout renamer^ 2>messages && + grep "HEAD is now at 7329388" messages && + test_line_count -gt 1 messages && H=$(git rev-parse --verify HEAD) && M=$(git show-ref -s --verify refs/heads/master) && test "z$H" = "z$M" && diff --git a/t/t7415-submodule-names.sh b/t/t7415-submodule-names.sh index 293e2e1963..49a37efe9c 100755 --- a/t/t7415-submodule-names.sh +++ b/t/t7415-submodule-names.sh @@ -154,7 +154,7 @@ test_expect_success 'fsck detects symlinked .gitmodules file' ' # symlink detector; this grep string comes from the config # variable name and will not be translated. test_must_fail git fsck 2>output && - grep gitmodulesSymlink output + test_i18ngrep gitmodulesSymlink output ) ' @@ -172,7 +172,7 @@ test_expect_success 'fsck detects non-blob .gitmodules' ' git ls-tree HEAD | sed s/subdir/.gitmodules/ | git mktree && test_must_fail git fsck 2>output && - grep gitmodulesBlob output + test_i18ngrep gitmodulesBlob output ) ' @@ -186,7 +186,7 @@ test_expect_success 'fsck detects corrupt .gitmodules' ' git commit -m "broken gitmodules" && git fsck 2>output && - grep gitmodulesParse output && + test_i18ngrep gitmodulesParse output && test_i18ngrep ! "bad config" output ) ' diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 6a392e87bc..5690fe2810 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -66,6 +66,34 @@ test_expect_success 'fast-export master~2..master' ' ' +test_expect_success 'fast-export --reference-excluded-parents master~2..master' ' + + git fast-export --reference-excluded-parents master~2..master >actual && + grep commit.refs/heads/master actual >commit-count && + test_line_count = 2 commit-count && + sed "s/master/rewrite/" actual | + (cd new && + git fast-import && + test $MASTER = $(git rev-parse --verify refs/heads/rewrite)) +' + +test_expect_success 'fast-export --show-original-ids' ' + + git fast-export --show-original-ids master >output && + grep ^original-oid output| sed -e s/^original-oid.// | sort >actual && + git rev-list --objects master muss >objects-and-names && + awk "{print \$1}" objects-and-names | sort >commits-trees-blobs && + comm -23 actual commits-trees-blobs >unfound && + test_must_be_empty unfound +' + +test_expect_success 'fast-export --show-original-ids | git fast-import' ' + + git fast-export --show-original-ids master muss | git fast-import --quiet && + test $MASTER = $(git rev-parse --verify refs/heads/master) && + test $MUSS = $(git rev-parse --verify refs/tags/muss) +' + test_expect_success 'iso-8859-1' ' git config i18n.commitencoding ISO8859-1 && @@ -325,6 +353,22 @@ test_expect_success 'rewriting tag of filtered out object' ' ) ' +test_expect_success 'rewrite tag predating pathspecs to nothing' ' + test_create_repo rewrite_tag_predating_pathspecs && + ( + cd rewrite_tag_predating_pathspecs && + + test_commit initial && + + git tag -a -m "Some old tag" v0.0.0.0.0.0.1 && + + test_commit bar && + + git fast-export --tag-of-filtered-object=rewrite --all -- bar.t >output && + grep from.$ZERO_OID output + ) +' + cat > limit-by-paths/expected << EOF blob mark :1 @@ -366,6 +410,26 @@ test_expect_success 'path limiting with import-marks does not lose unmodified fi grep file0 actual ' +test_expect_success 'avoid corrupt stream with non-existent mark' ' + test_create_repo avoid_non_existent_mark && + ( + cd avoid_non_existent_mark && + + test_commit important-path && + + test_commit ignored && + + git branch A && + git branch B && + + echo foo >>important-path.t && + git add important-path.t && + test_commit more changes && + + git fast-export --all -- important-path.t | git fast-import --force + ) +' + test_expect_success 'full-tree re-shows unmodified files' ' git checkout -f simple && git fast-export --full-tree simple >actual && @@ -508,10 +572,20 @@ test_expect_success 'use refspec' ' test_cmp expected actual ' -test_expect_success 'delete refspec' ' +test_expect_success 'delete ref because entire history excluded' ' git branch to-delete && - git fast-export --refspec :refs/heads/to-delete to-delete ^to-delete > actual && - cat > expected <<-EOF && + git fast-export to-delete ^to-delete >actual && + cat >expected <<-EOF && + reset refs/heads/to-delete + from 0000000000000000000000000000000000000000 + + EOF + test_cmp expected actual +' + +test_expect_success 'delete refspec' ' + git fast-export --refspec :refs/heads/to-delete >actual && + cat >expected <<-EOF && reset refs/heads/to-delete from 0000000000000000000000000000000000000000 diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 175f83d704..6558eee499 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -1249,7 +1249,7 @@ test_expect_success 'teardown after ref completion' ' test_path_completion () { - test $# = 2 || error "bug in the test script: not 2 parameters to test_path_completion" + test $# = 2 || BUG "not 2 parameters to test_path_completion" local cur="$1" expected="$2" echo "$expected" >expected && @@ -1434,7 +1434,8 @@ test_expect_success 'double dash "git checkout"' ' --ignore-other-worktrees Z --recurse-submodules Z --progress Z - --no-quiet Z + --guess Z + --no-guess Z --no-... Z EOF ' @@ -1539,7 +1540,7 @@ test_expect_success 'complete tree filename with metacharacters' ' EOF ' -test_expect_success 'send-email' ' +test_expect_success PERL 'send-email' ' test_completion "git send-email --cov" "--cover-letter " && test_completion "git send-email ma" "master " ' @@ -1697,7 +1698,8 @@ test_expect_success 'sourcing the completion script clears cached commands' ' verbose test -z "$__git_all_commands" ' -test_expect_success !GETTEXT_POISON 'sourcing the completion script clears cached merge strategies' ' +test_expect_success 'sourcing the completion script clears cached merge strategies' ' + GIT_TEST_GETTEXT_POISON= && __git_compute_merge_strategies && verbose test -n "$__git_merge_strategies" && . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index d158c8d0bf..6b3bbf99e4 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -418,14 +418,14 @@ test_declared_prereq () { test_verify_prereq () { test -z "$test_prereq" || expr >/dev/null "$test_prereq" : '[A-Z0-9_,!]*$' || - error "bug in the test script: '$test_prereq' does not look like a prereq" + BUG "'$test_prereq' does not look like a prereq" } test_expect_failure () { test_start_ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || - error "bug in the test script: not 2 or 3 parameters to test-expect-failure" + BUG "not 2 or 3 parameters to test-expect-failure" test_verify_prereq export test_prereq if ! test_skip "$@" @@ -445,7 +445,7 @@ test_expect_success () { test_start_ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || - error "bug in the test script: not 2 or 3 parameters to test-expect-success" + BUG "not 2 or 3 parameters to test-expect-success" test_verify_prereq export test_prereq if ! test_skip "$@" @@ -472,7 +472,7 @@ test_expect_success () { test_external () { test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 3 || - error >&5 "bug in the test script: not 3 or 4 parameters to test_external" + BUG "not 3 or 4 parameters to test_external" descr="$1" shift test_verify_prereq @@ -613,7 +613,7 @@ test_path_is_missing () { test_line_count () { if test $# != 3 then - error "bug in the test script: not 3 parameters to test_line_count" + BUG "not 3 parameters to test_line_count" elif ! test $(wc -l <"$3") "$1" "$2" then echo "test_line_count: line count for $3 !$1 $2" @@ -778,31 +778,30 @@ test_cmp_bin() { # Use this instead of test_cmp to compare files that contain expected and # actual output from git commands that can be translated. When running -# under GETTEXT_POISON this pretends that the command produced expected +# under GIT_TEST_GETTEXT_POISON this pretends that the command produced expected # results. test_i18ncmp () { - test -n "$GETTEXT_POISON" || test_cmp "$@" + ! test_have_prereq C_LOCALE_OUTPUT || test_cmp "$@" } # Use this instead of "grep expected-string actual" to see if the # output from a git command that can be translated either contains an # expected string, or does not contain an unwanted one. When running -# under GETTEXT_POISON this pretends that the command produced expected +# under GIT_TEST_GETTEXT_POISON this pretends that the command produced expected # results. test_i18ngrep () { eval "last_arg=\${$#}" test -f "$last_arg" || - error "bug in the test script: test_i18ngrep requires a file" \ - "to read as the last parameter" + BUG "test_i18ngrep requires a file to read as the last parameter" if test $# -lt 2 || { test "x!" = "x$1" && test $# -lt 3 ; } then - error "bug in the test script: too few parameters to test_i18ngrep" + BUG "too few parameters to test_i18ngrep" fi - if test -n "$GETTEXT_POISON" + if test_have_prereq !C_LOCALE_OUTPUT then # pretend success return 0 @@ -854,9 +853,23 @@ test_must_be_empty () { # Tests that its two parameters refer to the same revision test_cmp_rev () { - git rev-parse --verify "$1" >expect.rev && - git rev-parse --verify "$2" >actual.rev && - test_cmp expect.rev actual.rev + if test $# != 2 + then + error "bug in the test script: test_cmp_rev requires two revisions, but got $#" + else + local r1 r2 + r1=$(git rev-parse --verify "$1") && + r2=$(git rev-parse --verify "$2") && + if test "$r1" != "$r2" + then + cat >&4 <<-EOF + error: two revisions point to different objects: + '$1': $r1 + '$2': $r2 + EOF + return 1 + fi + fi } # Print a sequence of integers in increasing order, either with @@ -871,7 +884,7 @@ test_seq () { case $# in 1) set 1 "$@" ;; 2) ;; - *) error "bug in the test script: not 1 or 2 parameters to test_seq" ;; + *) BUG "not 1 or 2 parameters to test_seq" ;; esac test_seq_counter__=$1 while test "$test_seq_counter__" -le "$2" @@ -909,7 +922,7 @@ test_when_finished () { # doing so on Bash is better than nothing (the test will # silently pass on other shells). test "${BASH_SUBSHELL-0}" = 0 || - error "bug in test script: test_when_finished does nothing in a subshell" + BUG "test_when_finished does nothing in a subshell" test_cleanup="{ $* } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" } @@ -918,12 +931,13 @@ test_when_finished () { # Usage: test_create_repo <directory> test_create_repo () { test "$#" = 1 || - error "bug in the test script: not 1 parameter to test-create-repo" + BUG "not 1 parameter to test-create-repo" repo="$1" mkdir -p "$repo" ( cd "$repo" || error "Cannot setup test environment" - "$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 || + "${GIT_TEST_INSTALLED:-$GIT_EXEC_PATH}/git$X" init \ + "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 || error "cannot run git init -- have you built things yet?" mv .git/hooks .git/hooks-disabled ) || exit @@ -1230,7 +1244,7 @@ test_oid_cache () { if ! expr "$k" : '[a-z0-9][a-z0-9]*$' >/dev/null then - error 'bug in the test script: bad hash algorithm' + BUG 'bad hash algorithm' fi && eval "test_oid_${k}_$tag=\"\$v\"" done @@ -1245,7 +1259,7 @@ test_oid () { # key-hash pair, so exit with an error. if eval "test -z \"\${$var+set}\"" then - error "bug in the test script: undefined key '$1'" >&2 + BUG "undefined key '$1'" fi && eval "printf '%s' \"\${$var}\"" } diff --git a/t/test-lib.sh b/t/test-lib.sh index aba66cafa2..0f1faa24b2 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -49,18 +49,28 @@ export ASAN_OPTIONS : ${LSAN_OPTIONS=abort_on_error=1} export LSAN_OPTIONS +if test ! -f "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS +then + echo >&2 'error: GIT-BUILD-OPTIONS missing (has Git been built?).' + exit 1 +fi +. "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS +export PERL_PATH SHELL_PATH + ################################################################ # It appears that people try to run tests without building... -"$GIT_BUILD_DIR/git" >/dev/null +"${GIT_TEST_INSTALLED:-$GIT_BUILD_DIR}/git$X" >/dev/null if test $? != 1 then - echo >&2 'error: you do not seem to have built git yet.' + if test -n "$GIT_TEST_INSTALLED" + then + echo >&2 "error: there is no working Git at '$GIT_TEST_INSTALLED'" + else + echo >&2 'error: you do not seem to have built git yet.' + fi exit 1 fi -. "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS -export PERL_PATH SHELL_PATH - # if --tee was passed, write the output not only to the terminal, but # additionally to the file test-results/$BASENAME.out, too. case "$GIT_TEST_TEE_STARTED, $* " in @@ -95,6 +105,16 @@ PAGER=cat TZ=UTC export LANG LC_ALL PAGER TZ EDITOR=: + +# GIT_TEST_GETTEXT_POISON should not influence git commands executed +# during initialization of test-lib and the test repo. Back it up, +# unset and then restore after initialization is finished. +if test -n "$GIT_TEST_GETTEXT_POISON" +then + GIT_TEST_GETTEXT_POISON_ORIG=$GIT_TEST_GETTEXT_POISON + unset GIT_TEST_GETTEXT_POISON +fi + # A call to "unset" with no arguments causes at least Solaris 10 # /usr/xpg4/bin/sh and /bin/ksh to bail out. So keep the unsets # deriving from the command substitution clustered with the other @@ -382,6 +402,10 @@ error () { exit 1 } +BUG () { + error >&7 "bug in the test script: $*" +} + say () { say_color info "$*" } @@ -709,7 +733,7 @@ test_run_ () { if $(printf '%s\n' "$1" | sed -f "$GIT_BUILD_DIR/t/chainlint.sed" | grep -q '?![A-Z][A-Z]*?!') || test "OK-117" != "$(test_eval_ "(exit 117) && $1${LF}${LF}echo OK-\$?" 3>&1)" then - error "bug in the test script: broken &&-chain or run-away HERE-DOC: $1" + BUG "broken &&-chain or run-away HERE-DOC: $1" fi trace=$trace_tmp fi @@ -957,7 +981,7 @@ elif test -n "$GIT_TEST_INSTALLED" then GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path) || error "Cannot run git from $GIT_TEST_INSTALLED." - PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR:$PATH + PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR/t/helper:$PATH GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH} else # normal case, use ../bin-wrappers only unless $with_dashes: git_bin_dir="$GIT_BUILD_DIR/bin-wrappers" @@ -1104,13 +1128,15 @@ test -n "$USE_LIBPCRE1" && test_set_prereq LIBPCRE1 test -n "$USE_LIBPCRE2" && test_set_prereq LIBPCRE2 test -z "$NO_GETTEXT" && test_set_prereq GETTEXT +if test -n "$GIT_TEST_GETTEXT_POISON_ORIG" +then + GIT_TEST_GETTEXT_POISON=$GIT_TEST_GETTEXT_POISON_ORIG + unset GIT_TEST_GETTEXT_POISON_ORIG +fi + # Can we rely on git's output in the C locale? -if test -n "$GETTEXT_POISON" +if test -z "$GIT_TEST_GETTEXT_POISON" then - GIT_GETTEXT_POISON=YesPlease - export GIT_GETTEXT_POISON - test_set_prereq GETTEXT_POISON -else test_set_prereq C_LOCALE_OUTPUT fi @@ -1209,7 +1235,7 @@ test_lazy_prereq SANITY ' chmod -w SANETESTD.1 && chmod -r SANETESTD.1/x && chmod -rx SANETESTD.2 || - error "bug in test sript: cannot prepare SANETESTD" + BUG "cannot prepare SANETESTD" ! test -r SANETESTD.1/x && ! rm SANETESTD.1/x && ! test -f SANETESTD.2/x @@ -1217,7 +1243,7 @@ test_lazy_prereq SANITY ' chmod +rwx SANETESTD.1 SANETESTD.2 && rm -rf SANETESTD.1 SANETESTD.2 || - error "bug in test sript: cannot clean SANETESTD" + BUG "cannot clean SANETESTD" return $status ' |