diff options
Diffstat (limited to 't')
117 files changed, 3369 insertions, 602 deletions
@@ -153,6 +153,12 @@ appropriately before running "make". As the names depend on the tests' file names, it is safe to run the tests with this option in parallel. +--verbose-log:: + Write verbose output to the same logfile as `--tee`, but do + _not_ write it to stdout. Unlike `--tee --verbose`, this option + is safe to use when stdout is being consumed by a TAP parser + like `prove`. Implies `--tee` and `--verbose`. + --with-dashes:: By default tests are run without dashed forms of commands (like git-commit) in the PATH (it only uses diff --git a/t/helper/test-config.c b/t/helper/test-config.c index 3c6d08cd09..83a4f2ab86 100644 --- a/t/helper/test-config.c +++ b/t/helper/test-config.c @@ -72,6 +72,9 @@ int cmd_main(int argc, const char **argv) const char *v; const struct string_list *strptr; struct config_set cs; + + setup_git_directory(); + git_configset_init(&cs); if (argc < 2) { diff --git a/t/helper/test-dump-cache-tree.c b/t/helper/test-dump-cache-tree.c index 44f3290258..7af116d49e 100644 --- a/t/helper/test-dump-cache-tree.c +++ b/t/helper/test-dump-cache-tree.c @@ -58,6 +58,7 @@ int cmd_main(int ac, const char **av) { struct index_state istate; struct cache_tree *another = cache_tree(); + setup_git_directory(); if (read_cache() < 0) die("unable to read index file"); istate = the_index; diff --git a/t/helper/test-dump-split-index.c b/t/helper/test-dump-split-index.c index d1689248b4..e44430b699 100644 --- a/t/helper/test-dump-split-index.c +++ b/t/helper/test-dump-split-index.c @@ -23,7 +23,7 @@ int cmd_main(int ac, const char **av) for (i = 0; i < the_index.cache_nr; i++) { struct cache_entry *ce = the_index.cache[i]; printf("%06o %s %d\t%s\n", ce->ce_mode, - sha1_to_hex(ce->sha1), ce_stage(ce), ce->name); + oid_to_hex(&ce->oid), ce_stage(ce), ce->name); } printf("replacements:"); if (si->replace_bitmap) diff --git a/t/helper/test-dump-untracked-cache.c b/t/helper/test-dump-untracked-cache.c index 50112cc858..f752532ffb 100644 --- a/t/helper/test-dump-untracked-cache.c +++ b/t/helper/test-dump-untracked-cache.c @@ -18,10 +18,8 @@ static int compare_dir(const void *a_, const void *b_) static void dump(struct untracked_cache_dir *ucd, struct strbuf *base) { int i, len; - qsort(ucd->untracked, ucd->untracked_nr, sizeof(*ucd->untracked), - compare_untracked); - qsort(ucd->dirs, ucd->dirs_nr, sizeof(*ucd->dirs), - compare_dir); + QSORT(ucd->untracked, ucd->untracked_nr, compare_untracked); + QSORT(ucd->dirs, ucd->dirs_nr, compare_dir); len = base->len; strbuf_addf(base, "%s/", ucd->name); printf("%s %s", base->buf, diff --git a/t/helper/test-scrap-cache-tree.c b/t/helper/test-scrap-cache-tree.c index 5b2fd09908..27fe0405b8 100644 --- a/t/helper/test-scrap-cache-tree.c +++ b/t/helper/test-scrap-cache-tree.c @@ -7,6 +7,7 @@ static struct lock_file index_lock; int cmd_main(int ac, const char **av) { + setup_git_directory(); hold_locked_index(&index_lock, 1); if (read_cache() < 0) die("unable to read index file"); diff --git a/t/helper/test-sha1-array.c b/t/helper/test-sha1-array.c index 09f7790971..f7a53c4ad6 100644 --- a/t/helper/test-sha1-array.c +++ b/t/helper/test-sha1-array.c @@ -1,9 +1,10 @@ #include "cache.h" #include "sha1-array.h" -static void print_sha1(const unsigned char sha1[20], void *data) +static int print_sha1(const unsigned char sha1[20], void *data) { puts(sha1_to_hex(sha1)); + return 0; } int cmd_main(int argc, const char **argv) diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index c3e631394f..69174c6e31 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -123,6 +123,7 @@ ScriptAlias /error/ error.sh/ </Files> RewriteEngine on +RewriteRule ^/dumb-redir/(.*)$ /dumb/$1 [R=301] RewriteRule ^/smart-redir-perm/(.*)$ /smart/$1 [R=301] RewriteRule ^/smart-redir-temp/(.*)$ /smart/$1 [R=302] RewriteRule ^/smart-redir-auth/(.*)$ /auth/smart/$1 [R=301] @@ -132,6 +133,19 @@ RewriteRule ^/ftp-redir/(.*)$ ftp://localhost:1000/$1 [R=302] RewriteRule ^/loop-redir/x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-(.*) /$1 [R=302] RewriteRule ^/loop-redir/(.*)$ /loop-redir/x-$1 [R=302] +# The first rule issues a client-side redirect to something +# that _doesn't_ look like a git repo. The second rule is a +# server-side rewrite, so that it turns out the odd-looking +# thing _is_ a git repo. The "[PT]" tells Apache to match +# the usual ScriptAlias rules for /smart. +RewriteRule ^/insane-redir/(.*)$ /intern-redir/$1/foo [R=301] +RewriteRule ^/intern-redir/(.*)/foo$ /smart/$1 [PT] + +# Serve info/refs internally without redirecting, but +# issue a redirect for any object requests. +RewriteRule ^/redir-objects/(.*/info/refs)$ /dumb/$1 [PT] +RewriteRule ^/redir-objects/(.*/objects/.*)$ /dumb/$1 [R=301] + # Apache 2.2 does not understand <RequireAll>, so we use RewriteCond. # And as RewriteCond does not allow testing for non-matches, we match # the desired case first (one has abra, two has cadabra), and let it diff --git a/t/perf/p5310-pack-bitmaps.sh b/t/perf/p5310-pack-bitmaps.sh index de2a224a36..bb91dbb173 100755 --- a/t/perf/p5310-pack-bitmaps.sh +++ b/t/perf/p5310-pack-bitmaps.sh @@ -32,6 +32,14 @@ test_perf 'simulated fetch' ' } | git pack-objects --revs --stdout >/dev/null ' +test_perf 'pack to file' ' + git pack-objects --all pack1 </dev/null >/dev/null +' + +test_perf 'pack to file (bitmap)' ' + git pack-objects --use-bitmap-index --all pack1b </dev/null >/dev/null +' + test_expect_success 'create partial bitmap state' ' # pick a commit to represent the repo tip in the past cutoff=$(git rev-list HEAD~100 -1) && @@ -53,8 +61,12 @@ test_expect_success 'create partial bitmap state' ' git update-ref HEAD $orig_tip ' -test_perf 'partial bitmap' ' +test_perf 'clone (partial bitmap)' ' git pack-objects --stdout --all </dev/null >/dev/null ' +test_perf 'pack to file (partial bitmap)' ' + git pack-objects --use-bitmap-index --all pack2b </dev/null >/dev/null +' + test_done diff --git a/t/perf/p5550-fetch-tags.sh b/t/perf/p5550-fetch-tags.sh new file mode 100755 index 0000000000..a5dc39f86a --- /dev/null +++ b/t/perf/p5550-fetch-tags.sh @@ -0,0 +1,99 @@ +#!/bin/sh + +test_description='performance of tag-following with many tags + +This tests a fairly pathological case, so rather than rely on a real-world +case, we will construct our own repository. The situation is roughly as +follows. + +The parent repository has a large number of tags which are disconnected from +the rest of history. That makes them candidates for tag-following, but we never +actually grab them (and thus they will impact each subsequent fetch). + +The child repository is a clone of parent, without the tags, and is at least +one commit behind the parent (meaning that we will fetch one object and then +examine the tags to see if they need followed). Furthermore, it has a large +number of packs. + +The exact values of "large" here are somewhat arbitrary; I picked values that +start to show a noticeable performance problem on my machine, but without +taking too long to set up and run the tests. +' +. ./perf-lib.sh + +# make a long nonsense history on branch $1, consisting of $2 commits, each +# with a unique file pointing to the blob at $2. +create_history () { + perl -le ' + my ($branch, $n, $blob) = @ARGV; + for (1..$n) { + print "commit refs/heads/$branch"; + print "committer nobody <nobody@example.com> now"; + print "data 4"; + print "foo"; + print "M 100644 $blob $_"; + } + ' "$@" | + git fast-import --date-format=now +} + +# make a series of tags, one per commit in the revision range given by $@ +create_tags () { + git rev-list "$@" | + perl -lne 'print "create refs/tags/$. $_"' | + git update-ref --stdin +} + +# create $1 nonsense packs, each with a single blob +create_packs () { + perl -le ' + my ($n) = @ARGV; + for (1..$n) { + print "blob"; + print "data <<EOF"; + print "$_"; + print "EOF"; + } + ' "$@" | + git fast-import && + + git cat-file --batch-all-objects --batch-check='%(objectname)' | + while read sha1 + do + echo $sha1 | git pack-objects .git/objects/pack/pack + done +} + +test_expect_success 'create parent and child' ' + git init parent && + git -C parent commit --allow-empty -m base && + git clone parent child && + git -C parent commit --allow-empty -m trigger-fetch +' + +test_expect_success 'populate parent tags' ' + ( + cd parent && + blob=$(echo content | git hash-object -w --stdin) && + create_history cruft 3000 $blob && + create_tags cruft && + git branch -D cruft + ) +' + +test_expect_success 'create child packs' ' + ( + cd child && + git config gc.auto 0 && + git config gc.autopacklimit 0 && + create_packs 500 + ) +' + +test_perf 'fetch' ' + # make sure there is something to fetch on each iteration + git -C child update-ref -d refs/remotes/origin/master && + git -C child fetch +' + +test_done diff --git a/t/perf/run b/t/perf/run index cfd70129bb..e8adedadfd 100755 --- a/t/perf/run +++ b/t/perf/run @@ -30,7 +30,13 @@ unpack_git_rev () { } build_git_rev () { rev=$1 - cp ../../config.mak build/$rev/config.mak + for config in config.mak config.mak.autogen config.status + do + if test -e "../../$config" + then + cp "../../$config" "build/$rev/" + fi + done (cd build/$rev && make $GIT_PERF_MAKE_OPTS) || die "failed to build revision '$mydir'" } diff --git a/t/t0001-init.sh b/t/t0001-init.sh index a6fdd5ef3a..b8fc588b19 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -384,4 +384,30 @@ test_expect_success MINGW 'bare git dir not hidden' ' ! is_hidden newdir ' +test_expect_success 'remote init from does not use config from cwd' ' + rm -rf newdir && + test_config core.logallrefupdates true && + git init newdir && + echo true >expect && + git -C newdir config --bool core.logallrefupdates >actual && + test_cmp expect actual +' + +test_expect_success 're-init from a linked worktree' ' + git init main-worktree && + ( + cd main-worktree && + test_commit first && + git worktree add ../linked-worktree && + mv .git/info/exclude expected-exclude && + cp .git/config expected-config && + find .git/worktrees -print | sort >expected && + git -C ../linked-worktree init && + test_cmp expected-exclude .git/info/exclude && + test_cmp expected-config .git/config && + find .git/worktrees -print | sort >actual && + test_cmp expected actual + ) +' + test_done diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index f94120a894..71350e0657 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -83,7 +83,11 @@ test_expect_success 'safecrlf: print warning only once' ' git add doublewarn && git commit -m "nowarn" && for w in Oh here is CRLFQ in text; do echo $w; done | q_to_cr >doublewarn && - test $(git add doublewarn 2>&1 | grep "CRLF will be replaced by LF" | wc -l) = 1 + git add doublewarn 2>err && + if test_have_prereq C_LOCALE_OUTPUT + then + test $(grep "CRLF will be replaced by LF" err | wc -l) = 1 + fi ' diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index 6cc678846e..161f560446 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -4,15 +4,17 @@ test_description='blob conversion via gitattributes' . ./test-lib.sh -TEST_ROOT="$(pwd)" +TEST_ROOT="$PWD" +PATH=$TEST_ROOT:$PATH -cat <<EOF >"$TEST_ROOT/rot13.sh" -#!$SHELL_PATH +write_script <<\EOF "$TEST_ROOT/rot13.sh" tr \ 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ' \ 'nopqrstuvwxyzabcdefghijklmNOPQRSTUVWXYZABCDEFGHIJKLM' EOF -chmod +x "$TEST_ROOT/rot13.sh" + +write_script rot13-filter.pl "$PERL_PATH" \ + <"$TEST_DIRECTORY"/t0021/rot13-filter.pl generate_random_characters () { LEN=$1 @@ -64,7 +66,7 @@ test_cmp_exclude_clean () { # is equal to the committed content. test_cmp_committed_rot13 () { test_cmp "$1" "$2" && - "$TEST_ROOT/rot13.sh" <"$1" >expected && + rot13.sh <"$1" >expected && git cat-file blob :"$2" >actual && test_cmp expected actual } @@ -340,7 +342,7 @@ test_expect_success 'diff does not reuse worktree files that need cleaning' ' ' test_expect_success PERL 'required process filter should filter data' ' - test_config_global filter.protocol.process "$TEST_DIRECTORY/t0021/rot13-filter.pl clean smudge" && + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && test_config_global filter.protocol.required true && rm -rf repo && mkdir repo && @@ -348,10 +350,9 @@ test_expect_success PERL 'required process filter should filter data' ' cd repo && git init && - echo "git-stderr.log" >.gitignore && echo "*.r filter=protocol" >.gitattributes && git add . && - git commit . -m "test commit 1" && + git commit -m "test commit 1" && git branch empty-branch && cp "$TEST_ROOT/test.o" test.r && @@ -418,7 +419,7 @@ test_expect_success PERL 'required process filter should filter data' ' test_expect_success PERL 'required process filter takes precedence' ' test_config_global filter.protocol.clean false && - test_config_global filter.protocol.process "$TEST_DIRECTORY/t0021/rot13-filter.pl clean" && + test_config_global filter.protocol.process "rot13-filter.pl clean" && test_config_global filter.protocol.required true && rm -rf repo && mkdir repo && @@ -443,7 +444,7 @@ test_expect_success PERL 'required process filter takes precedence' ' ' test_expect_success PERL 'required process filter should be used only for "clean" operation only' ' - test_config_global filter.protocol.process "$TEST_DIRECTORY/t0021/rot13-filter.pl clean" && + test_config_global filter.protocol.process "rot13-filter.pl clean" && rm -rf repo && mkdir repo && ( @@ -478,7 +479,7 @@ test_expect_success PERL 'required process filter should be used only for "clean ' test_expect_success PERL 'required process filter should process multiple packets' ' - test_config_global filter.protocol.process "$TEST_DIRECTORY/t0021/rot13-filter.pl clean smudge" && + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && test_config_global filter.protocol.required true && rm -rf repo && @@ -498,7 +499,7 @@ test_expect_success PERL 'required process filter should process multiple packet for FILE in "$TEST_ROOT"/*.file do cp "$FILE" . && - "$TEST_ROOT/rot13.sh" <"$FILE" >"$FILE.rot13" + rot13.sh <"$FILE" >"$FILE.rot13" done && echo "*.file filter=protocol" >.gitattributes && @@ -538,7 +539,7 @@ test_expect_success PERL 'required process filter should process multiple packet ' test_expect_success PERL 'required process filter with clean error should fail' ' - test_config_global filter.protocol.process "$TEST_DIRECTORY/t0021/rot13-filter.pl clean smudge" && + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && test_config_global filter.protocol.required true && rm -rf repo && mkdir repo && @@ -557,7 +558,7 @@ test_expect_success PERL 'required process filter with clean error should fail' ' test_expect_success PERL 'process filter should restart after unexpected write failure' ' - test_config_global filter.protocol.process "$TEST_DIRECTORY/t0021/rot13-filter.pl clean smudge" && + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && rm -rf repo && mkdir repo && ( @@ -601,14 +602,14 @@ test_expect_success PERL 'process filter should restart after unexpected write f # Smudge failed ! test_cmp smudge-write-fail.o smudge-write-fail.r && - "$TEST_ROOT/rot13.sh" <smudge-write-fail.o >expected && + rot13.sh <smudge-write-fail.o >expected && git cat-file blob :smudge-write-fail.r >actual && test_cmp expected actual ) ' test_expect_success PERL 'process filter should not be restarted if it signals an error' ' - test_config_global filter.protocol.process "$TEST_DIRECTORY/t0021/rot13-filter.pl clean smudge" && + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && rm -rf repo && mkdir repo && ( @@ -647,7 +648,7 @@ test_expect_success PERL 'process filter should not be restarted if it signals a ' test_expect_success PERL 'process filter abort stops processing of all further files' ' - test_config_global filter.protocol.process "$TEST_DIRECTORY/t0021/rot13-filter.pl clean smudge" && + test_config_global filter.protocol.process "rot13-filter.pl clean smudge" && rm -rf repo && mkdir repo && ( diff --git a/t/t0021/rot13-filter.pl b/t/t0021/rot13-filter.pl index 02b3363fd9..617f581e56 100755..100644 --- a/t/t0021/rot13-filter.pl +++ b/t/t0021/rot13-filter.pl @@ -1,4 +1,3 @@ -#!/usr/bin/perl # # Example implementation for the Git filter protocol version 2 # See Documentation/gitattributes.txt, section "Filter Protocol" @@ -22,6 +21,7 @@ use strict; use warnings; +use IO::File; my $MAX_PACKET_CONTENT_SIZE = 65516; my @capabilities = @ARGV; diff --git a/t/t0030-stripspace.sh b/t/t0030-stripspace.sh index 29e91d861c..bbf3e39e3d 100755 --- a/t/t0030-stripspace.sh +++ b/t/t0030-stripspace.sh @@ -432,6 +432,15 @@ test_expect_success '-c with changed comment char' ' test_cmp expect actual ' +test_expect_success '-c with comment char defined in .git/config' ' + test_config core.commentchar = && + printf "= foo\n" >expect && + printf "foo" | ( + mkdir sub && cd sub && git stripspace -c + ) >actual && + test_cmp expect actual +' + test_expect_success 'avoid SP-HT sequence in commented line' ' printf "#\tone\n#\n# two\n" >expect && printf "\tone\n\ntwo\n" | git stripspace -c >actual && diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index db5f60d0c5..74d2cd76fe 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -208,32 +208,15 @@ test_expect_success 'unambiguously abbreviated option' ' ' test_expect_success 'unambiguously abbreviated option with "="' ' - test-parse-options --int=2 >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="integer: 2" --int=2 ' test_expect_success 'ambiguously abbreviated option' ' test_expect_code 129 test-parse-options --strin 123 ' -cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 0 -string: 123 -abbrev: 7 -verbose: -1 -quiet: 0 -dry run: no -file: (not set) -EOF - test_expect_success 'non ambiguous option (after two options it abbreviates)' ' - test-parse-options --st 123 >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="string: 123" --st 123 ' cat >typo.err <<\EOF @@ -256,24 +239,8 @@ test_expect_success 'detect possible typos' ' test_cmp typo.err output.err ' -cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: -1 -quiet: 0 -dry run: no -file: (not set) -arg 00: --quux -EOF - test_expect_success 'keep some options as arguments' ' - test-parse-options --quux >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="arg 00: --quux" --quux ' cat >expect <<\EOF @@ -350,54 +317,20 @@ test_expect_success 'OPT_NEGBIT() and OPT_SET_INT() work' ' test_cmp expect output ' -cat >expect <<\EOF -boolean: 6 -integer: 0 -magnitude: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: -1 -quiet: 0 -dry run: no -file: (not set) -EOF - test_expect_success 'OPT_BIT() works' ' - test-parse-options -bb --or4 >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="boolean: 6" -bb --or4 ' test_expect_success 'OPT_NEGBIT() works' ' - test-parse-options -bb --no-neg-or4 >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="boolean: 6" -bb --no-neg-or4 ' test_expect_success 'OPT_COUNTUP() with PARSE_OPT_NODASH works' ' - test-parse-options + + + + + + >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="boolean: 6" + + + + + + ' -cat >expect <<\EOF -boolean: 0 -integer: 12345 -magnitude: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: -1 -quiet: 0 -dry run: no -file: (not set) -EOF - test_expect_success 'OPT_NUMBER_CALLBACK() works' ' - test-parse-options -12345 >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="integer: 12345" -12345 ' cat >expect <<\EOF @@ -435,118 +368,28 @@ test_expect_success '--no-list resets list' ' test_cmp expect output ' -cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: -1 -quiet: 3 -dry run: no -file: (not set) -EOF - test_expect_success 'multiple quiet levels' ' - test-parse-options -q -q -q >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="quiet: 3" -q -q -q ' -cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: 3 -quiet: 0 -dry run: no -file: (not set) -EOF - test_expect_success 'multiple verbose levels' ' - test-parse-options -v -v -v >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="verbose: 3" -v -v -v ' -cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: -1 -quiet: 0 -dry run: no -file: (not set) -EOF - test_expect_success '--no-quiet sets --quiet to 0' ' - test-parse-options --no-quiet >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="quiet: 0" --no-quiet ' -cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: -1 -quiet: 0 -dry run: no -file: (not set) -EOF - test_expect_success '--no-quiet resets multiple -q to 0' ' - test-parse-options -q -q -q --no-quiet >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="quiet: 0" -q -q -q --no-quiet ' -cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: 0 -quiet: 0 -dry run: no -file: (not set) -EOF - test_expect_success '--no-verbose sets verbose to 0' ' - test-parse-options --no-verbose >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="verbose: 0" --no-verbose ' -cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 0 -string: (not set) -abbrev: 7 -verbose: 0 -quiet: 0 -dry run: no -file: (not set) -EOF - test_expect_success '--no-verbose resets multiple verbose to 0' ' - test-parse-options -v -v -v --no-verbose >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-parse-options --expect="verbose: 0" -v -v -v --no-verbose ' test_done diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index bf2deee109..444b5a4df8 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -305,8 +305,9 @@ test_git_path GIT_COMMON_DIR=bar config bar/config test_git_path GIT_COMMON_DIR=bar packed-refs bar/packed-refs test_git_path GIT_COMMON_DIR=bar shallow bar/shallow -# In the tests below, the distinction between $PWD and $(pwd) is important: -# on Windows, $PWD is POSIX style (/c/foo), $(pwd) has drive letter (c:/foo). +# In the tests below, $(pwd) must be used because it is a native path on +# Windows and avoids MSYS's path mangling (which simplifies "foo/../bar" and +# strips the dot from trailing "/."). test_submodule_relative_url "../" "../foo" "../submodule" "../../submodule" test_submodule_relative_url "../" "../foo/bar" "../submodule" "../../foo/submodule" @@ -314,27 +315,29 @@ test_submodule_relative_url "../" "../foo/submodule" "../submodule" "../../foo/s test_submodule_relative_url "../" "./foo" "../submodule" "../submodule" test_submodule_relative_url "../" "./foo/bar" "../submodule" "../foo/submodule" test_submodule_relative_url "../../../" "../foo/bar" "../sub/a/b/c" "../../../../foo/sub/a/b/c" -test_submodule_relative_url "../" "$PWD/addtest" "../repo" "$(pwd)/repo" +test_submodule_relative_url "../" "$(pwd)/addtest" "../repo" "$(pwd)/repo" test_submodule_relative_url "../" "foo/bar" "../submodule" "../foo/submodule" test_submodule_relative_url "../" "foo" "../submodule" "../submodule" test_submodule_relative_url "(null)" "../foo/bar" "../sub/a/b/c" "../foo/sub/a/b/c" +test_submodule_relative_url "(null)" "../foo/bar" "../sub/a/b/c/" "../foo/sub/a/b/c" +test_submodule_relative_url "(null)" "../foo/bar/" "../sub/a/b/c" "../foo/sub/a/b/c" test_submodule_relative_url "(null)" "../foo/bar" "../submodule" "../foo/submodule" test_submodule_relative_url "(null)" "../foo/submodule" "../submodule" "../foo/submodule" test_submodule_relative_url "(null)" "../foo" "../submodule" "../submodule" test_submodule_relative_url "(null)" "./foo/bar" "../submodule" "foo/submodule" test_submodule_relative_url "(null)" "./foo" "../submodule" "submodule" test_submodule_relative_url "(null)" "//somewhere else/repo" "../subrepo" "//somewhere else/subrepo" -test_submodule_relative_url "(null)" "$PWD/subsuper_update_r" "../subsubsuper_update_r" "$(pwd)/subsubsuper_update_r" -test_submodule_relative_url "(null)" "$PWD/super_update_r2" "../subsuper_update_r" "$(pwd)/subsuper_update_r" -test_submodule_relative_url "(null)" "$PWD/." "../." "$(pwd)/." -test_submodule_relative_url "(null)" "$PWD" "./." "$(pwd)/." -test_submodule_relative_url "(null)" "$PWD/addtest" "../repo" "$(pwd)/repo" -test_submodule_relative_url "(null)" "$PWD" "./å äö" "$(pwd)/å äö" -test_submodule_relative_url "(null)" "$PWD/." "../submodule" "$(pwd)/submodule" -test_submodule_relative_url "(null)" "$PWD/submodule" "../submodule" "$(pwd)/submodule" -test_submodule_relative_url "(null)" "$PWD/home2/../remote" "../bundle1" "$(pwd)/home2/../bundle1" -test_submodule_relative_url "(null)" "$PWD/submodule_update_repo" "./." "$(pwd)/submodule_update_repo/." +test_submodule_relative_url "(null)" "$(pwd)/subsuper_update_r" "../subsubsuper_update_r" "$(pwd)/subsubsuper_update_r" +test_submodule_relative_url "(null)" "$(pwd)/super_update_r2" "../subsuper_update_r" "$(pwd)/subsuper_update_r" +test_submodule_relative_url "(null)" "$(pwd)/." "../." "$(pwd)/." +test_submodule_relative_url "(null)" "$(pwd)" "./." "$(pwd)/." +test_submodule_relative_url "(null)" "$(pwd)/addtest" "../repo" "$(pwd)/repo" +test_submodule_relative_url "(null)" "$(pwd)" "./å äö" "$(pwd)/å äö" +test_submodule_relative_url "(null)" "$(pwd)/." "../submodule" "$(pwd)/submodule" +test_submodule_relative_url "(null)" "$(pwd)/submodule" "../submodule" "$(pwd)/submodule" +test_submodule_relative_url "(null)" "$(pwd)/home2/../remote" "../bundle1" "$(pwd)/home2/../bundle1" +test_submodule_relative_url "(null)" "$(pwd)/submodule_update_repo" "./." "$(pwd)/submodule_update_repo/." test_submodule_relative_url "(null)" "file:///tmp/repo" "../subrepo" "file:///tmp/subrepo" test_submodule_relative_url "(null)" "foo/bar" "../submodule" "foo/submodule" test_submodule_relative_url "(null)" "foo" "../submodule" "submodule" diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh index 7d2baa15bb..c5245c5cb4 100755 --- a/t/t1007-hash-object.sh +++ b/t/t1007-hash-object.sh @@ -101,7 +101,7 @@ test_expect_success 'git hash-object --stdin file1 <file0 first operates on file test "$obname1" = "$obname1new" ' -test_expect_success 'check that appropriate filter is invoke when --path is used' ' +test_expect_success 'set up crlf tests' ' echo fooQ | tr Q "\\015" >file0 && cp file0 file1 && echo "file0 -crlf" >.gitattributes && @@ -109,7 +109,10 @@ test_expect_success 'check that appropriate filter is invoke when --path is used git config core.autocrlf true && file0_sha=$(git hash-object file0) && file1_sha=$(git hash-object file1) && - test "$file0_sha" != "$file1_sha" && + test "$file0_sha" != "$file1_sha" +' + +test_expect_success 'check that appropriate filter is invoke when --path is used' ' path1_sha=$(git hash-object --path=file1 file0) && path0_sha=$(git hash-object --path=file0 file1) && test "$file0_sha" = "$path0_sha" && @@ -117,38 +120,30 @@ test_expect_success 'check that appropriate filter is invoke when --path is used path1_sha=$(cat file0 | git hash-object --path=file1 --stdin) && path0_sha=$(cat file1 | git hash-object --path=file0 --stdin) && test "$file0_sha" = "$path0_sha" && - test "$file1_sha" = "$path1_sha" && - git config --unset core.autocrlf + test "$file1_sha" = "$path1_sha" +' + +test_expect_success 'gitattributes also work in a subdirectory' ' + mkdir subdir && + ( + cd subdir && + subdir_sha0=$(git hash-object ../file0) && + subdir_sha1=$(git hash-object ../file1) && + test "$file0_sha" = "$subdir_sha0" && + test "$file1_sha" = "$subdir_sha1" + ) ' test_expect_success 'check that --no-filters option works' ' - echo fooQ | tr Q "\\015" >file0 && - cp file0 file1 && - echo "file0 -crlf" >.gitattributes && - echo "file1 crlf" >>.gitattributes && - git config core.autocrlf true && - file0_sha=$(git hash-object file0) && - file1_sha=$(git hash-object file1) && - test "$file0_sha" != "$file1_sha" && nofilters_file1=$(git hash-object --no-filters file1) && test "$file0_sha" = "$nofilters_file1" && nofilters_file1=$(cat file1 | git hash-object --stdin) && - test "$file0_sha" = "$nofilters_file1" && - git config --unset core.autocrlf + test "$file0_sha" = "$nofilters_file1" ' test_expect_success 'check that --no-filters option works with --stdin-paths' ' - echo fooQ | tr Q "\\015" >file0 && - cp file0 file1 && - echo "file0 -crlf" >.gitattributes && - echo "file1 crlf" >>.gitattributes && - git config core.autocrlf true && - file0_sha=$(git hash-object file0) && - file1_sha=$(git hash-object file1) && - test "$file0_sha" != "$file1_sha" && nofilters_file1=$(echo "file1" | git hash-object --stdin-paths --no-filters) && - test "$file0_sha" = "$nofilters_file1" && - git config --unset core.autocrlf + test "$file0_sha" = "$nofilters_file1" ' pop_repo @@ -188,9 +183,30 @@ for args in "-w --stdin-paths" "--stdin-paths -w"; do pop_repo done -test_expect_success 'corrupt tree' ' +test_expect_success 'too-short tree' ' echo abc >malformed-tree && - test_must_fail git hash-object -t tree malformed-tree + test_must_fail git hash-object -t tree malformed-tree 2>err && + test_i18ngrep "too-short tree object" err +' + +hex2oct() { + perl -ne 'printf "\\%03o", hex for /../g' +} + +test_expect_success 'malformed mode in tree' ' + hex_sha1=$(echo foo | git hash-object --stdin -w) && + bin_sha1=$(echo $hex_sha1 | hex2oct) && + printf "9100644 \0$bin_sha1" >tree-with-malformed-mode && + test_must_fail git hash-object -t tree tree-with-malformed-mode 2>err && + test_i18ngrep "malformed mode in tree entry" err +' + +test_expect_success 'empty filename in tree' ' + hex_sha1=$(echo foo | git hash-object --stdin -w) && + bin_sha1=$(echo $hex_sha1 | hex2oct) && + printf "100644 \0$bin_sha1" >tree-with-empty-filename && + test_must_fail git hash-object -t tree tree-with-empty-filename 2>err && + test_i18ngrep "empty filename in tree entry" err ' test_expect_success 'corrupt commit' ' diff --git a/t/t1301-shared-repo.sh b/t/t1301-shared-repo.sh index ac10875408..1312004f8c 100755 --- a/t/t1301-shared-repo.sh +++ b/t/t1301-shared-repo.sh @@ -172,4 +172,45 @@ test_expect_success POSIXPERM 'forced modes' ' }" actual)" ' +test_expect_success POSIXPERM 'remote init does not use config from cwd' ' + git config core.sharedrepository 0666 && + umask 0022 && + git init --bare child.git && + echo "-rw-r--r--" >expect && + modebits child.git/config >actual && + test_cmp expect actual +' + +test_expect_success POSIXPERM 're-init respects core.sharedrepository (local)' ' + git config core.sharedrepository 0666 && + umask 0022 && + echo whatever >templates/foo && + git init --template=templates && + echo "-rw-rw-rw-" >expect && + modebits .git/foo >actual && + test_cmp expect actual +' + +test_expect_success POSIXPERM 're-init respects core.sharedrepository (remote)' ' + rm -rf child.git && + umask 0022 && + git init --bare --shared=0666 child.git && + test_path_is_missing child.git/foo && + git init --bare --template=../templates child.git && + echo "-rw-rw-rw-" >expect && + modebits child.git/foo >actual && + test_cmp expect actual +' + +test_expect_success POSIXPERM 'template can set core.sharedrepository' ' + rm -rf child.git && + umask 0022 && + git config core.sharedrepository 0666 && + cp .git/config templates/config && + git init --bare --template=../templates child.git && + echo "-rw-rw-rw-" >expect && + modebits child.git/HEAD >actual && + test_cmp expect actual +' + test_done diff --git a/t/t1302-repo-version.sh b/t/t1302-repo-version.sh index 9bcd34969f..ce4cff13bb 100755 --- a/t/t1302-repo-version.sh +++ b/t/t1302-repo-version.sh @@ -25,46 +25,26 @@ test_expect_success 'setup' ' test_expect_success 'gitdir selection on normal repos' ' echo 0 >expect && git config core.repositoryformatversion >actual && - ( - cd test && - git config core.repositoryformatversion >../actual2 - ) && + git -C test config core.repositoryformatversion >actual2 && test_cmp expect actual && test_cmp expect actual2 ' test_expect_success 'gitdir selection on unsupported repo' ' # Make sure it would stop at test2, not trash - echo 99 >expect && - ( - cd test2 && - git config core.repositoryformatversion >../actual - ) && - test_cmp expect actual + test_expect_code 1 git -C test2 config core.repositoryformatversion >actual ' test_expect_success 'gitdir not required mode' ' git apply --stat test.patch && - ( - cd test && - git apply --stat ../test.patch - ) && - ( - cd test2 && - git apply --stat ../test.patch - ) + git -C test apply --stat ../test.patch && + git -C test2 apply --stat ../test.patch ' test_expect_success 'gitdir required mode' ' git apply --check --index test.patch && - ( - cd test && - git apply --check --index ../test.patch - ) && - ( - cd test2 && - test_must_fail git apply --check --index ../test.patch - ) + git -C test apply --check --index ../test.patch && + test_must_fail git -C test2 apply --check --index ../test.patch ' check_allow () { diff --git a/t/t1308-config-set.sh b/t/t1308-config-set.sh index 7655c94c28..ff50960cca 100755 --- a/t/t1308-config-set.sh +++ b/t/t1308-config-set.sh @@ -219,14 +219,8 @@ test_expect_success 'check line errors for malformed values' ' ' test_expect_success 'error on modifying repo config without repo' ' - mkdir no-repo && - ( - GIT_CEILING_DIRECTORIES=$(pwd) && - export GIT_CEILING_DIRECTORIES && - cd no-repo && - test_must_fail git config a.b c 2>err && - grep "not in a git directory" err - ) + nongit test_must_fail git config a.b c 2>err && + grep "not in a git directory" err ' cmdline_config="'foo.bar=from-cmdline'" diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 8f52da2771..ee7d4736db 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -188,8 +188,7 @@ test_expect_success 'commit with NUL in header' ' grep "error in commit $new.*unterminated header: NUL at offset" out ' -test_expect_success 'malformatted tree object' ' - test_when_finished "git update-ref -d refs/tags/wrong" && +test_expect_success 'tree object with duplicate entries' ' test_when_finished "remove_object \$T" && T=$( GIT_INDEX_FILE=test-index && @@ -208,6 +207,19 @@ test_expect_success 'malformatted tree object' ' grep "error in tree .*contains duplicate file entries" out ' +test_expect_success 'unparseable tree object' ' + test_when_finished "git update-ref -d refs/heads/wrong" && + test_when_finished "remove_object \$tree_sha1" && + test_when_finished "remove_object \$commit_sha1" && + tree_sha1=$(printf "100644 \0twenty-bytes-of-junk" | git hash-object -t tree --stdin -w --literally) && + commit_sha1=$(git commit-tree $tree_sha1) && + git update-ref refs/heads/wrong $commit_sha1 && + test_must_fail git fsck 2>out && + test_i18ngrep "error: empty filename in tree entry" out && + test_i18ngrep "$tree_sha1" out && + test_i18ngrep ! "fatal: empty filename in tree entry" out +' + test_expect_success 'tag pointing to nonexistent' ' cat >invalid-tag <<-\EOF && object ffffffffffffffffffffffffffffffffffffffff diff --git a/t/t1503-rev-parse-verify.sh b/t/t1503-rev-parse-verify.sh index ab27d0db5c..492edffa9c 100755 --- a/t/t1503-rev-parse-verify.sh +++ b/t/t1503-rev-parse-verify.sh @@ -139,4 +139,9 @@ test_expect_success 'master@{n} for various n' ' test_must_fail git rev-parse --verify master@{$Np1} ' +test_expect_success SYMLINKS 'ref resolution not confused by broken symlinks' ' + ln -s does-not-exist .git/refs/heads/broken && + test_must_fail git rev-parse --verify broken +' + test_done diff --git a/t/t1512-rev-parse-disambiguation.sh b/t/t1512-rev-parse-disambiguation.sh index e221167cfb..711704ba5a 100755 --- a/t/t1512-rev-parse-disambiguation.sh +++ b/t/t1512-rev-parse-disambiguation.sh @@ -42,7 +42,7 @@ test_expect_success 'blob and tree' ' test_expect_success 'warn ambiguity when no candidate matches type hint' ' test_must_fail git rev-parse --verify 000000000^{commit} 2>actual && - grep "short SHA1 000000000 is ambiguous" actual + test_i18ngrep "short SHA1 000000000 is ambiguous" actual ' test_expect_success 'disambiguate tree-ish' ' @@ -264,6 +264,13 @@ test_expect_success 'ambiguous commit-ish' ' test_must_fail git log 000000000... ' +# There are three objects with this prefix: a blob, a tree, and a tag. We know +# the blob will not pass as a treeish, but the tree and tag should (and thus +# cause an error). +test_expect_success 'ambiguous tags peel to treeish' ' + test_must_fail git rev-parse 0000000000f^{tree} +' + test_expect_success 'rev-parse --disambiguate' ' # The test creates 16 objects that share the prefix and two # commits created by commit-tree in earlier tests share a @@ -273,6 +280,13 @@ test_expect_success 'rev-parse --disambiguate' ' test "$(sed -e "s/^\(.........\).*/\1/" actual | sort -u)" = 000000000 ' +test_expect_success 'rev-parse --disambiguate drops duplicates' ' + git rev-parse --disambiguate=000000000 >expect && + git pack-objects .git/objects/pack/pack <expect && + git rev-parse --disambiguate=000000000 >actual && + test_cmp expect actual +' + test_expect_success 'ambiguous 40-hex ref' ' TREE=$(git mktree </dev/null) && REF=$(git rev-parse HEAD) && @@ -291,4 +305,60 @@ test_expect_success 'ambiguous short sha1 ref' ' grep "refname.*${REF}.*ambiguous" err ' +test_expect_success C_LOCALE_OUTPUT 'ambiguity errors are not repeated (raw)' ' + test_must_fail git rev-parse 00000 2>stderr && + grep "is ambiguous" stderr >errors && + test_line_count = 1 errors +' + +test_expect_success C_LOCALE_OUTPUT 'ambiguity errors are not repeated (treeish)' ' + test_must_fail git rev-parse 00000:foo 2>stderr && + grep "is ambiguous" stderr >errors && + test_line_count = 1 errors +' + +test_expect_success C_LOCALE_OUTPUT 'ambiguity errors are not repeated (peel)' ' + test_must_fail git rev-parse 00000^{commit} 2>stderr && + grep "is ambiguous" stderr >errors && + test_line_count = 1 errors +' + +test_expect_success C_LOCALE_OUTPUT 'ambiguity hints' ' + test_must_fail git rev-parse 000000000 2>stderr && + grep ^hint: stderr >hints && + # 16 candidates, plus one intro line + test_line_count = 17 hints +' + +test_expect_success C_LOCALE_OUTPUT 'ambiguity hints respect type' ' + test_must_fail git rev-parse 000000000^{commit} 2>stderr && + grep ^hint: stderr >hints && + # 5 commits, 1 tag (which is a commitish), plus intro line + test_line_count = 7 hints +' + +test_expect_success C_LOCALE_OUTPUT 'failed type-selector still shows hint' ' + # these two blobs share the same prefix "ee3d", but neither + # will pass for a commit + echo 851 | git hash-object --stdin -w && + echo 872 | git hash-object --stdin -w && + test_must_fail git rev-parse ee3d^{commit} 2>stderr && + grep ^hint: stderr >hints && + test_line_count = 3 hints +' + +test_expect_success 'core.disambiguate config can prefer types' ' + # ambiguous between tree and tag + sha1=0000000000f && + test_must_fail git rev-parse $sha1 && + git rev-parse $sha1^{commit} && + git -c core.disambiguate=committish rev-parse $sha1 +' + +test_expect_success 'core.disambiguate does not override context' ' + # treeish ambiguous between tag and tree + test_must_fail \ + git -c core.disambiguate=committish rev-parse $sha1^{tree} +' + test_done diff --git a/t/t2010-checkout-ambiguous.sh b/t/t2010-checkout-ambiguous.sh index e76e84afbb..2e47fe01cf 100755 --- a/t/t2010-checkout-ambiguous.sh +++ b/t/t2010-checkout-ambiguous.sh @@ -41,6 +41,15 @@ test_expect_success 'check ambiguity' ' test_must_fail git checkout world all ' +test_expect_success 'check ambiguity in subdir' ' + mkdir sub && + # not ambiguous because sub/world does not exist + git -C sub checkout world ../all && + echo hello >sub/world && + # ambiguous because sub/world does exist + test_must_fail git -C sub checkout world ../all +' + test_expect_success 'disambiguate checking out from a tree-ish' ' echo bye > world && git checkout world -- world && diff --git a/t/t2024-checkout-dwim.sh b/t/t2024-checkout-dwim.sh index 468a000e4b..3e5ac81bd2 100755 --- a/t/t2024-checkout-dwim.sh +++ b/t/t2024-checkout-dwim.sh @@ -174,6 +174,18 @@ test_expect_success 'checkout of branch with a file having the same name fails' test_branch master ' +test_expect_success 'checkout of branch with a file in subdir having the same name fails' ' + git checkout -B master && + test_might_fail git branch -D spam && + + >spam && + mkdir sub && + mv spam sub/spam && + test_must_fail git -C sub checkout spam && + test_must_fail git rev-parse --verify refs/heads/spam && + test_branch master +' + test_expect_success 'checkout <branch> -- succeeds, even if a file with the same name exists' ' git checkout -B master && test_might_fail git branch -D spam && diff --git a/t/t2025-worktree-add.sh b/t/t2025-worktree-add.sh index 4bcc335a19..b618d6be21 100755 --- a/t/t2025-worktree-add.sh +++ b/t/t2025-worktree-add.sh @@ -138,6 +138,14 @@ test_expect_success 'checkout from a bare repo without "add"' ' ) ' +test_expect_success '"add" default branch of a bare repo' ' + ( + git clone --bare . bare2 && + cd bare2 && + git worktree add ../there3 master + ) +' + test_expect_success 'checkout with grafts' ' test_when_finished rm .git/info/grafts && test_commit abc && diff --git a/t/t2027-worktree-list.sh b/t/t2027-worktree-list.sh index 1b1b65a6b0..465eeeacd3 100755 --- a/t/t2027-worktree-list.sh +++ b/t/t2027-worktree-list.sh @@ -96,4 +96,44 @@ test_expect_success 'bare repo cleanup' ' rm -rf bare1 ' +test_expect_success 'broken main worktree still at the top' ' + git init broken-main && + ( + cd broken-main && + test_commit new && + git worktree add linked && + cat >expected <<-EOF && + worktree $(pwd) + HEAD $_z40 + + EOF + cd linked && + echo "worktree $(pwd)" >expected && + echo "ref: .broken" >../.git/HEAD && + git worktree list --porcelain | head -n 3 >actual && + test_cmp ../expected actual && + git worktree list | head -n 1 >actual.2 && + grep -F "(error)" actual.2 + ) +' + +test_expect_success 'linked worktrees are sorted' ' + mkdir sorted && + git init sorted/main && + ( + cd sorted/main && + test_tick && + test_commit new && + git worktree add ../first && + git worktree add ../second && + git worktree list --porcelain | grep ^worktree >actual + ) && + cat >expected <<-EOF && + worktree $(pwd)/sorted/main + worktree $(pwd)/sorted/first + worktree $(pwd)/sorted/second + EOF + test_cmp expected sorted/main/actual +' + test_done diff --git a/t/t2107-update-index-basic.sh b/t/t2107-update-index-basic.sh index dfe02f4818..32ac6e09bd 100755 --- a/t/t2107-update-index-basic.sh +++ b/t/t2107-update-index-basic.sh @@ -80,4 +80,17 @@ test_expect_success '.lock files cleaned up' ' ) ' +test_expect_success '--chmod=+x and chmod=-x in the same argument list' ' + >A && + >B && + git add A B && + git update-index --chmod=+x A --chmod=-x B && + cat >expect <<-\EOF && + 100755 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 A + 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 B + EOF + git ls-files --stage A B >actual && + test_cmp expect actual +' + test_done diff --git a/t/t2203-add-intent.sh b/t/t2203-add-intent.sh index 8f22c43e24..84a9028c43 100755 --- a/t/t2203-add-intent.sh +++ b/t/t2203-add-intent.sh @@ -5,10 +5,24 @@ test_description='Intent to add' . ./test-lib.sh test_expect_success 'intent to add' ' + test_commit 1 && + git rm 1.t && + echo hello >1.t && echo hello >file && echo hello >elif && git add -N file && - git add elif + git add elif && + git add -N 1.t +' + +test_expect_success 'git status' ' + git status --porcelain | grep -v actual >actual && + cat >expect <<-\EOF && + DA 1.t + A elif + A file + EOF + test_cmp expect actual ' test_expect_success 'check result of "add -N"' ' @@ -43,7 +57,9 @@ test_expect_success 'i-t-a entry is simply ignored' ' git add -N nitfol && git commit -m second && test $(git ls-tree HEAD -- nitfol | wc -l) = 0 && - test $(git diff --name-only HEAD -- nitfol | wc -l) = 1 + test $(git diff --name-only HEAD -- nitfol | wc -l) = 1 && + test $(git diff --name-only --ita-invisible-in-index HEAD -- nitfol | wc -l) = 0 && + test $(git diff --name-only --ita-invisible-in-index -- nitfol | wc -l) = 1 ' test_expect_success 'can commit with an unrelated i-t-a entry in index' ' @@ -113,5 +129,26 @@ test_expect_success 'cache-tree does skip dir that becomes empty' ' ) ' +test_expect_success 'commit: ita entries ignored in empty intial commit check' ' + git init empty-intial-commit && + ( + cd empty-intial-commit && + : >one && + git add -N one && + test_must_fail git commit -m nothing-new-here + ) +' + +test_expect_success 'commit: ita entries ignored in empty commit check' ' + git init empty-subsequent-commit && + ( + cd empty-subsequent-commit && + test_commit one && + : >two && + git add -N two && + test_must_fail git commit -m nothing-new-here + ) +' + test_done diff --git a/t/t3007-ls-files-recurse-submodules.sh b/t/t3007-ls-files-recurse-submodules.sh new file mode 100755 index 0000000000..a5426171d3 --- /dev/null +++ b/t/t3007-ls-files-recurse-submodules.sh @@ -0,0 +1,210 @@ +#!/bin/sh + +test_description='Test ls-files recurse-submodules feature + +This test verifies the recurse-submodules feature correctly lists files from +submodules. +' + +. ./test-lib.sh + +test_expect_success 'setup directory structure and submodules' ' + echo a >a && + mkdir b && + echo b >b/b && + git add a b && + git commit -m "add a and b" && + git init submodule && + echo c >submodule/c && + git -C submodule add c && + git -C submodule commit -m "add c" && + git submodule add ./submodule && + git commit -m "added submodule" +' + +test_expect_success 'ls-files correctly outputs files in submodule' ' + cat >expect <<-\EOF && + .gitmodules + a + b/b + submodule/c + EOF + + git ls-files --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success 'ls-files correctly outputs files in submodule with -z' ' + lf_to_nul >expect <<-\EOF && + .gitmodules + a + b/b + submodule/c + EOF + + git ls-files --recurse-submodules -z >actual && + test_cmp expect actual +' + +test_expect_success 'ls-files does not output files not added to a repo' ' + cat >expect <<-\EOF && + .gitmodules + a + b/b + submodule/c + EOF + + echo a >not_added && + echo b >b/not_added && + echo c >submodule/not_added && + git ls-files --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success 'ls-files recurses more than 1 level' ' + cat >expect <<-\EOF && + .gitmodules + a + b/b + submodule/.gitmodules + submodule/c + submodule/subsub/d + EOF + + git init submodule/subsub && + echo d >submodule/subsub/d && + git -C submodule/subsub add d && + git -C submodule/subsub commit -m "add d" && + git -C submodule submodule add ./subsub && + git -C submodule commit -m "added subsub" && + git ls-files --recurse-submodules >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs setup' ' + echo e >submodule/subsub/e.txt && + git -C submodule/subsub add e.txt && + git -C submodule/subsub commit -m "adding e.txt" && + echo f >submodule/f.TXT && + echo g >submodule/g.txt && + git -C submodule add f.TXT g.txt && + git -C submodule commit -m "add f and g" && + echo h >h.txt && + mkdir sib && + echo sib >sib/file && + git add h.txt sib/file && + git commit -m "add h and sib/file" && + git init sub && + echo sub >sub/file && + git -C sub add file && + git -C sub commit -m "add file" && + git submodule add ./sub && + git commit -m "added sub" && + + cat >expect <<-\EOF && + .gitmodules + a + b/b + h.txt + sib/file + sub/file + submodule/.gitmodules + submodule/c + submodule/f.TXT + submodule/g.txt + submodule/subsub/d + submodule/subsub/e.txt + EOF + + git ls-files --recurse-submodules >actual && + test_cmp expect actual && + cat actual && + git ls-files --recurse-submodules "*" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + h.txt + submodule/g.txt + submodule/subsub/e.txt + EOF + + git ls-files --recurse-submodules "*.txt" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + h.txt + submodule/f.TXT + submodule/g.txt + submodule/subsub/e.txt + EOF + + git ls-files --recurse-submodules ":(icase)*.txt" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + h.txt + submodule/f.TXT + submodule/g.txt + EOF + + git ls-files --recurse-submodules ":(icase)*.txt" ":(exclude)submodule/subsub/*" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + sub/file + EOF + + git ls-files --recurse-submodules "sub" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "sub/" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "sub/file" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "su*/file" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "su?/file" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules and pathspecs' ' + cat >expect <<-\EOF && + sib/file + sub/file + EOF + + git ls-files --recurse-submodules "s??/file" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "s???file" >actual && + test_cmp expect actual && + git ls-files --recurse-submodules "s*file" >actual && + test_cmp expect actual +' + +test_expect_success '--recurse-submodules does not support --error-unmatch' ' + test_must_fail git ls-files --recurse-submodules --error-unmatch 2>actual && + test_i18ngrep "does not support --error-unmatch" actual +' + +test_incompatible_with_recurse_submodules () { + test_expect_success "--recurse-submodules and $1 are incompatible" " + test_must_fail git ls-files --recurse-submodules $1 2>actual && + test_i18ngrep 'unsupported mode' actual + " +} + +test_incompatible_with_recurse_submodules --deleted +test_incompatible_with_recurse_submodules --modified +test_incompatible_with_recurse_submodules --others +test_incompatible_with_recurse_submodules --stage +test_incompatible_with_recurse_submodules --killed +test_incompatible_with_recurse_submodules --unmerged + +test_done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index 470f33466c..9a893b5fe7 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -575,13 +575,13 @@ test_expect_success 'merge removes empty directories' ' test_must_fail test -d d ' -test_expect_failure 'merge-recursive simple w/submodule' ' +test_expect_success 'merge-recursive simple w/submodule' ' git checkout submod && git merge remove ' -test_expect_failure 'merge-recursive simple w/submodule result' ' +test_expect_success 'merge-recursive simple w/submodule result' ' git ls-files -s >actual && ( diff --git a/t/t3310-notes-merge-manual-resolve.sh b/t/t3310-notes-merge-manual-resolve.sh index 6967436327..baef2d6924 100755 --- a/t/t3310-notes-merge-manual-resolve.sh +++ b/t/t3310-notes-merge-manual-resolve.sh @@ -225,7 +225,7 @@ test_expect_success 'cannot do merge w/conflicts when previous merge is unfinish test -d .git/NOTES_MERGE_WORKTREE && test_must_fail git notes merge z >output 2>&1 && # Output should indicate what is wrong - grep -q "\\.git/NOTES_MERGE_\\* exists" output + test_i18ngrep -q "\\.git/NOTES_MERGE_\\* exists" output ' # Setup non-conflicting merge between x and new notes ref w diff --git a/t/t3320-notes-merge-worktrees.sh b/t/t3320-notes-merge-worktrees.sh index 6e0511596b..b9c3bc2487 100755 --- a/t/t3320-notes-merge-worktrees.sh +++ b/t/t3320-notes-merge-worktrees.sh @@ -52,7 +52,7 @@ test_expect_success 'merge z into y while mid-merge in another workdir fails' ' cd worktree && git config core.notesRef refs/notes/y && test_must_fail git notes merge z 2>err && - test_i18ngrep "A notes merge into refs/notes/y is already in-progress at" err + test_i18ngrep "a notes merge into refs/notes/y is already in-progress at" err ) && test_path_is_missing .git/worktrees/worktree/NOTES_MERGE_REF ' diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 597e94e294..c896a4c106 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -976,6 +976,17 @@ test_expect_success 'rebase -i respects core.commentchar' ' test B = $(git cat-file commit HEAD^ | sed -ne \$p) ' +test_expect_success 'rebase -i respects core.commentchar=auto' ' + test_config core.commentchar auto && + write_script copy-edit-script.sh <<-\EOF && + cp "$1" edit-script + EOF + test_set_editor "$(pwd)/copy-edit-script.sh" && + test_when_finished "git rebase --abort || :" && + git rebase -i HEAD^ && + test -z "$(grep -ve "^#" -e "^\$" -e "^pick" edit-script)" +' + test_expect_success 'rebase -i, with <onto> and <upstream> specified as :/quuxery' ' test_when_finished "git branch -D torebase" && git checkout -b torebase branch1 && @@ -1195,7 +1206,7 @@ To avoid this message, use "drop" to explicitly remove a commit. Use 'git config rebase.missingCommitsCheck' to change the level of warnings. The possible behaviours are: ignore, warn, error. -You can fix this with 'git rebase --edit-todo'. +You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. Or you can abort the rebase with 'git rebase --abort'. EOF @@ -1219,7 +1230,7 @@ cat >expect <<EOF Warning: the command isn't recognized in the following line: - badcmd $(git rev-list --oneline -1 master~1) -You can fix this with 'git rebase --edit-todo'. +You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. Or you can abort the rebase with 'git rebase --abort'. EOF @@ -1254,7 +1265,7 @@ cat >expect <<EOF Warning: the SHA-1 is missing or isn't a commit in the following line: - edit XXXXXXX False commit -You can fix this with 'git rebase --edit-todo'. +You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. Or you can abort the rebase with 'git rebase --abort'. EOF diff --git a/t/t3426-rebase-submodule.sh b/t/t3426-rebase-submodule.sh index d5b896d445..ebf4f5e4b2 100755 --- a/t/t3426-rebase-submodule.sh +++ b/t/t3426-rebase-submodule.sh @@ -38,9 +38,6 @@ git_rebase_interactive () { git rebase -i "$1" } -KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 -# The real reason "replace directory with submodule" fails is because a -# directory "sub1" exists, but we reuse the suppression added for merge here test_submodule_switch "git_rebase_interactive" test_done diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index 51f3bbb8af..4f2a263b63 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -96,7 +96,7 @@ test_expect_success 'revert forbidden on dirty working tree' ' echo content >extra_file && git add extra_file && test_must_fail git revert HEAD 2>errors && - test_i18ngrep "Your local changes would be overwritten by " errors + test_i18ngrep "your local changes would be overwritten by " errors ' @@ -141,4 +141,16 @@ test_expect_success 'cherry-pick "-" works with arguments' ' test_cmp expect actual ' +test_expect_success 'cherry-pick works with dirty renamed file' ' + test_commit to-rename && + git checkout -b unrelated && + test_commit unrelated && + git checkout @{-1} && + git mv to-rename.t renamed && + test_tick && + git commit -m renamed && + echo modified >renamed && + git cherry-pick refs/heads/unrelated +' + test_done diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index 7b7a89dbd5..372307c21b 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -147,6 +147,16 @@ test_expect_success '--abort to cancel single cherry-pick' ' git diff-index --exit-code HEAD ' +test_expect_success '--abort does not unsafely change HEAD' ' + pristine_detach initial && + test_must_fail git cherry-pick picked anotherpick && + git reset --hard base && + test_must_fail git cherry-pick picked anotherpick && + git cherry-pick --abort 2>actual && + test_i18ngrep "You seem to have moved HEAD" actual && + test_cmp_rev base HEAD +' + test_expect_success 'cherry-pick --abort to cancel multiple revert' ' pristine_detach anotherpick && test_expect_code 1 git revert base..picked && diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index d046d98aec..bcbb680651 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -111,21 +111,21 @@ test_expect_success 'Remove nonexistent file with --ignore-unmatch' ' ' test_expect_success '"rm" command printed' ' - echo frotz > test-file && + echo frotz >test-file && git add test-file && git commit -m "add file for rm test" && - git rm test-file > rm-output && + git rm test-file >rm-output && test $(grep "^rm " rm-output | wc -l) = 1 && rm -f test-file rm-output && git commit -m "remove file from rm test" ' test_expect_success '"rm" command suppressed with --quiet' ' - echo frotz > test-file && + echo frotz >test-file && git add test-file && git commit -m "add file for rm --quiet test" && - git rm --quiet test-file > rm-output && - test $(wc -l < rm-output) = 0 && + git rm --quiet test-file >rm-output && + test_must_be_empty rm-output && rm -f test-file rm-output && git commit -m "remove file from rm --quiet test" ' @@ -221,7 +221,7 @@ test_expect_success 'Call "rm" from outside the work tree' ' mkdir repo && (cd repo && git init && - echo something > somefile && + echo something >somefile && git add somefile && git commit -m "add a file" && (cd .. && @@ -287,7 +287,7 @@ test_expect_success 'rm removes empty submodules from work tree' ' git commit -m "add submodule" && git rm submod && test ! -e submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -298,7 +298,7 @@ test_expect_success 'rm removes removed submodule from index and .gitmodules' ' git submodule update && rm -rf submod && git rm submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -309,7 +309,7 @@ test_expect_success 'rm removes work tree of unmodified submodules' ' git submodule update && git rm submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -320,7 +320,7 @@ test_expect_success 'rm removes a submodule with a trailing /' ' git submodule update && git rm submod/ && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -335,17 +335,15 @@ test_expect_success 'rm succeeds when given a directory with a trailing /' ' test_expect_success 'rm of a populated submodule with different HEAD fails unless forced' ' git reset --hard && git submodule update && - (cd submod && - git checkout HEAD^ - ) && + git -C submod checkout HEAD^ && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -418,34 +416,30 @@ test_expect_success 'rm issues a warning when section is not found in .gitmodule test_expect_success 'rm of a populated submodule with modifications fails unless forced' ' git reset --hard && git submodule update && - (cd submod && - echo X >empty - ) && + echo X >submod/empty && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' test_expect_success 'rm of a populated submodule with untracked files fails unless forced' ' git reset --hard && git submodule update && - (cd submod && - echo X >untracked - ) && + echo X >submod/untracked && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -461,16 +455,12 @@ test_expect_success 'setup submodule conflict' ' git add nitfol && git commit -m "added nitfol 2" && git checkout -b conflict1 master && - (cd submod && - git fetch && - git checkout branch1 - ) && + git -C submod fetch && + git -C submod checkout branch1 && git add submod && git commit -m "submod 1" && git checkout -b conflict2 master && - (cd submod && - git checkout branch2 - ) && + git -C submod checkout branch2 && git add submod && git commit -m "submod 2" ' @@ -486,7 +476,7 @@ test_expect_success 'rm removes work tree of unmodified conflicted submodule' ' test_must_fail git merge conflict2 && git rm submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -494,18 +484,16 @@ test_expect_success 'rm of a conflicted populated submodule with different HEAD git checkout conflict1 && git reset --hard && git submodule update && - (cd submod && - git checkout HEAD^ - ) && + git -C submod checkout HEAD^ && test_must_fail git merge conflict2 && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -515,18 +503,16 @@ test_expect_success 'rm of a conflicted populated submodule with modifications f git checkout conflict1 && git reset --hard && git submodule update && - (cd submod && - echo X >empty - ) && + echo X >submod/empty && test_must_fail git merge conflict2 && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && test_must_fail git config -f .gitmodules submodule.sub.path @@ -536,18 +522,16 @@ test_expect_success 'rm of a conflicted populated submodule with untracked files git checkout conflict1 && git reset --hard && git submodule update && - (cd submod && - echo X >untracked - ) && + echo X >submod/untracked && test_must_fail git merge conflict2 && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -564,12 +548,12 @@ test_expect_success 'rm of a conflicted populated submodule with a .git director test_must_fail git rm submod && test -d submod && test -d submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && test_must_fail git rm -f submod && test -d submod && test -d submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git merge --abort && rm -rf submod @@ -581,7 +565,7 @@ test_expect_success 'rm of a conflicted unpopulated submodule succeeds' ' test_must_fail git merge conflict2 && git rm submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -597,12 +581,12 @@ test_expect_success 'rm of a populated submodule with a .git directory fails eve test_must_fail git rm submod && test -d submod && test -d submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && ! test -s actual && test_must_fail git rm -f submod && test -d submod && test -d submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && ! test -s actual && rm -rf submod ' @@ -629,58 +613,52 @@ test_expect_success 'setup subsubmodule' ' test_expect_success 'rm recursively removes work tree of unmodified submodules' ' git rm submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' test_expect_success 'rm of a populated nested submodule with different nested HEAD fails unless forced' ' git reset --hard && git submodule update --recursive && - (cd submod/subsubmod && - git checkout HEAD^ - ) && + git -C submod/subsubmod checkout HEAD^ && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' test_expect_success 'rm of a populated nested submodule with nested modifications fails unless forced' ' git reset --hard && git submodule update --recursive && - (cd submod/subsubmod && - echo X >empty - ) && + echo X >submod/subsubmod/empty && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' test_expect_success 'rm of a populated nested submodule with nested untracked files fails unless forced' ' git reset --hard && git submodule update --recursive && - (cd submod/subsubmod && - echo X >untracked - ) && + echo X >submod/subsubmod/untracked && test_must_fail git rm submod && test -d submod && test -f submod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && test ! -d submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -695,12 +673,12 @@ test_expect_success 'rm of a populated nested submodule with a nested .git direc test_must_fail git rm submod && test -d submod && test -d submod/subsubmod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && ! test -s actual && test_must_fail git rm -f submod && test -d submod && test -d submod/subsubmod/.git && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && ! test -s actual && rm -rf submod ' @@ -709,14 +687,14 @@ test_expect_success 'checking out a commit after submodule removal needs manual git commit -m "submodule removal" submod && git checkout HEAD^ && git submodule update && - git checkout -q HEAD^ 2>actual && + git checkout -q HEAD^ && git checkout -q master 2>actual && test_i18ngrep "^warning: unable to rmdir submod:" actual && git status -s submod >actual && echo "?? submod/" >expected && test_cmp expected actual && rm -rf submod && - git status -s -uno --ignore-submodules=none > actual && + git status -s -uno --ignore-submodules=none >actual && ! test -s actual ' @@ -881,4 +859,9 @@ test_expect_success 'rm files with two different errors' ' test_i18ncmp expect actual ' +test_expect_success 'rm empty string should invoke warning' ' + git rm -rf "" 2>output && + test_i18ngrep "warning: empty strings" output +' + test_done diff --git a/t/t3700-add.sh b/t/t3700-add.sh index 2978cb9d64..f3a4b4a913 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -331,6 +331,11 @@ test_expect_success 'git add --dry-run --ignore-missing of non-existing file out test_i18ncmp expect.err actual.err ' +test_expect_success 'git add empty string should invoke warning' ' + git add "" 2>output && + test_i18ngrep "warning: empty strings" output +' + test_expect_success 'git add --chmod=[+-]x stages correctly' ' rm -f foo1 && echo foo >foo1 && @@ -349,4 +354,53 @@ test_expect_success POSIXPERM,SYMLINKS 'git add --chmod=+x with symlinks' ' test_mode_in_index 100755 foo2 ' +test_expect_success 'git add --chmod=[+-]x changes index with already added file' ' + rm -f foo3 xfoo3 && + echo foo >foo3 && + git add foo3 && + git add --chmod=+x foo3 && + test_mode_in_index 100755 foo3 && + echo foo >xfoo3 && + chmod 755 xfoo3 && + git add xfoo3 && + git add --chmod=-x xfoo3 && + test_mode_in_index 100644 xfoo3 +' + +test_expect_success POSIXPERM 'git add --chmod=[+-]x does not change the working tree' ' + echo foo >foo4 && + git add foo4 && + git add --chmod=+x foo4 && + ! test -x foo4 +' + +test_expect_success 'no file status change if no pathspec is given' ' + >foo5 && + >foo6 && + git add foo5 foo6 && + git add --chmod=+x && + test_mode_in_index 100644 foo5 && + test_mode_in_index 100644 foo6 +' + +test_expect_success 'no file status change if no pathspec is given in subdir' ' + mkdir -p sub && + ( + cd sub && + >sub-foo1 && + >sub-foo2 && + git add . && + git add --chmod=+x && + test_mode_in_index 100644 sub-foo1 && + test_mode_in_index 100644 sub-foo2 + ) +' + +test_expect_success 'all statuses changed in folder if . is given' ' + git add --chmod=+x . && + test $(git ls-files --stage | grep ^100644 | wc -l) -eq 0 && + git add --chmod=-x . && + test $(git ls-files --stage | grep ^100755 | wc -l) -eq 0 +' + test_done diff --git a/t/t3900-i18n-commit.sh b/t/t3900-i18n-commit.sh index 4bf1dbe9c9..3b94283e35 100755 --- a/t/t3900-i18n-commit.sh +++ b/t/t3900-i18n-commit.sh @@ -45,7 +45,7 @@ test_expect_success 'UTF-8 invalid characters refused' ' printf "Commit message\n\nInvalid surrogate:\355\240\200\n" \ >"$HOME/invalid" && git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr && - grep "did not conform" "$HOME"/stderr + test_i18ngrep "did not conform" "$HOME"/stderr ' test_expect_success 'UTF-8 overlong sequences rejected' ' @@ -55,7 +55,7 @@ test_expect_success 'UTF-8 overlong sequences rejected' ' printf "\340\202\251ommit message\n\nThis is not a space:\300\240\n" \ >"$HOME/invalid" && git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr && - grep "did not conform" "$HOME"/stderr + test_i18ngrep "did not conform" "$HOME"/stderr ' test_expect_success 'UTF-8 non-characters refused' ' @@ -64,7 +64,7 @@ test_expect_success 'UTF-8 non-characters refused' ' printf "Commit message\n\nNon-character:\364\217\277\276\n" \ >"$HOME/invalid" && git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr && - grep "did not conform" "$HOME"/stderr + test_i18ngrep "did not conform" "$HOME"/stderr ' test_expect_success 'UTF-8 non-characters refused' ' @@ -73,7 +73,7 @@ test_expect_success 'UTF-8 non-characters refused' ' printf "Commit message\n\nNon-character:\357\267\220\n" \ >"$HOME/invalid" && git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr && - grep "did not conform" "$HOME"/stderr + test_i18ngrep "did not conform" "$HOME"/stderr ' for H in ISO8859-1 eucJP ISO-2022-JP diff --git a/t/t3901-i18n-patch.sh b/t/t3901-i18n-patch.sh index 509084e1a7..f663d567c8 100755 --- a/t/t3901-i18n-patch.sh +++ b/t/t3901-i18n-patch.sh @@ -295,7 +295,7 @@ test_expect_success 'am --no-utf8 (U/L)' ' # commit-tree will warn that the commit message does not contain valid UTF-8 # as mailinfo did not convert it - grep "did not conform" err && + test_i18ngrep "did not conform" err && check_encoding 2 ' diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 2142c1fa92..2de3e18ce6 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -131,6 +131,26 @@ test_expect_success 'drop middle stash' ' test 1 = $(git show HEAD:file) ' +test_expect_success 'drop middle stash by index' ' + git reset --hard && + echo 8 >file && + git stash && + echo 9 >file && + git stash && + git stash drop 1 && + test 2 = $(git stash list | wc -l) && + git stash apply && + test 9 = $(cat file) && + test 1 = $(git show :file) && + test 1 = $(git show HEAD:file) && + git reset --hard && + git stash drop && + git stash apply && + test 3 = $(cat file) && + test 1 = $(git show :file) && + test 1 = $(git show HEAD:file) +' + test_expect_success 'stash pop' ' git reset --hard && git stash pop && @@ -604,6 +624,21 @@ test_expect_success 'invalid ref of the form stash@{n}, n >= N' ' git stash drop ' +test_expect_success 'invalid ref of the form "n", n >= N' ' + git stash clear && + test_must_fail git stash drop 0 && + echo bar5 >file && + echo bar6 >file2 && + git add file2 && + git stash && + test_must_fail git stash drop 1 && + test_must_fail git stash pop 1 && + test_must_fail git stash apply 1 && + test_must_fail git stash show 1 && + test_must_fail git stash branch tmp 1 && + git stash drop +' + test_expect_success 'stash branch should not drop the stash if the branch exists' ' git stash clear && echo foo >file && @@ -731,4 +766,13 @@ test_expect_success 'stash list --cc shows combined diff' ' test_cmp expect actual ' +test_expect_success 'stash is not confused by partial renames' ' + mv file renamed && + git add renamed && + git stash && + git stash apply && + test_path_is_file renamed && + test_path_is_missing file +' + test_done diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh index 643d729157..0a8af76aab 100755 --- a/t/t4012-diff-binary.sh +++ b/t/t4012-diff-binary.sh @@ -68,7 +68,7 @@ test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' sed -e "s/-CIT/xCIT/" <output >broken && test_must_fail git apply --stat --summary broken 2>detected && detected=$(cat detected) && - detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(expr "$detected" : "error.*at line \\([0-9]*\\)\$") && detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' @@ -77,7 +77,7 @@ test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' git diff --binary | sed -e "s/-CIT/xCIT/" >broken && test_must_fail git apply --stat --summary broken 2>detected && detected=$(cat detected) && - detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(expr "$detected" : "error.*at line \\([0-9]*\\)\$") && detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 566817e2ef..d09acfe48e 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -311,6 +311,13 @@ diff --line-prefix=abc master master^ side diff --dirstat master~1 master~2 diff --dirstat initial rearrange diff --dirstat-by-file initial rearrange +# No-index --abbrev and --no-abbrev +diff --raw initial +diff --raw --abbrev=4 initial +diff --raw --no-abbrev initial +diff --no-index --raw dir2 dir +diff --no-index --raw --abbrev=4 dir2 dir +diff --no-index --raw --no-abbrev dir2 dir EOF test_expect_success 'log -S requires an argument' ' diff --git a/t/t4013/diff.diff_--no-index_--raw_--abbrev=4_dir2_dir b/t/t4013/diff.diff_--no-index_--raw_--abbrev=4_dir2_dir new file mode 100644 index 0000000000..a71b38a833 --- /dev/null +++ b/t/t4013/diff.diff_--no-index_--raw_--abbrev=4_dir2_dir @@ -0,0 +1,3 @@ +$ git diff --no-index --raw --abbrev=4 dir2 dir +:000000 100644 0000... 0000... A dir/sub +$ diff --git a/t/t4013/diff.diff_--no-index_--raw_--no-abbrev_dir2_dir b/t/t4013/diff.diff_--no-index_--raw_--no-abbrev_dir2_dir new file mode 100644 index 0000000000..e0f00977c8 --- /dev/null +++ b/t/t4013/diff.diff_--no-index_--raw_--no-abbrev_dir2_dir @@ -0,0 +1,3 @@ +$ git diff --no-index --raw --no-abbrev dir2 dir +:000000 100644 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 A dir/sub +$ diff --git a/t/t4013/diff.diff_--no-index_--raw_dir2_dir b/t/t4013/diff.diff_--no-index_--raw_dir2_dir new file mode 100644 index 0000000000..3cb4ee7a9a --- /dev/null +++ b/t/t4013/diff.diff_--no-index_--raw_dir2_dir @@ -0,0 +1,3 @@ +$ git diff --no-index --raw dir2 dir +:000000 100644 0000000... 0000000... A dir/sub +$ diff --git a/t/t4013/diff.diff_--raw_--abbrev=4_initial b/t/t4013/diff.diff_--raw_--abbrev=4_initial new file mode 100644 index 0000000000..c3641db31d --- /dev/null +++ b/t/t4013/diff.diff_--raw_--abbrev=4_initial @@ -0,0 +1,6 @@ +$ git diff --raw --abbrev=4 initial +:100644 100644 35d2... 9929... M dir/sub +:100644 100644 01e7... 10a8... M file0 +:000000 100644 0000... b1e6... A file1 +:100644 000000 01e7... 0000... D file2 +$ diff --git a/t/t4013/diff.diff_--raw_--no-abbrev_initial b/t/t4013/diff.diff_--raw_--no-abbrev_initial new file mode 100644 index 0000000000..c87a1258e3 --- /dev/null +++ b/t/t4013/diff.diff_--raw_--no-abbrev_initial @@ -0,0 +1,6 @@ +$ git diff --raw --no-abbrev initial +:100644 100644 35d242ba79ae89ac695e26b3d4c27a8e6f028f9e 992913c5aa0a5476d10c49ed0f21fc0c6d1aedf3 M dir/sub +:100644 100644 01e79c32a8c99c557f0757da7cb6d65b3414466d 10a8a9f3657f91a156b9f0184ed79a20adef9f7f M file0 +:000000 100644 0000000000000000000000000000000000000000 b1e67221afe8461efd244b487afca22d46b95eb8 A file1 +:100644 000000 01e79c32a8c99c557f0757da7cb6d65b3414466d 0000000000000000000000000000000000000000 D file2 +$ diff --git a/t/t4013/diff.diff_--raw_initial b/t/t4013/diff.diff_--raw_initial new file mode 100644 index 0000000000..a3e978040d --- /dev/null +++ b/t/t4013/diff.diff_--raw_initial @@ -0,0 +1,6 @@ +$ git diff --raw initial +:100644 100644 35d242b... 992913c... M dir/sub +:100644 100644 01e79c3... 10a8a9f... M file0 +:000000 100644 0000000... b1e6722... A file1 +:100644 000000 01e79c3... 0000000... D file2 +$ diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index b0579dd452..ba4902df2b 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -754,9 +754,22 @@ test_expect_success 'format-patch --ignore-if-in-upstream HEAD' ' git format-patch --ignore-if-in-upstream HEAD ' +git_version="$(git --version | sed "s/.* //")" + +signature() { + printf "%s\n%s\n\n" "-- " "${1:-$git_version}" +} + +test_expect_success 'format-patch default signature' ' + git format-patch --stdout -1 | tail -n 3 >output && + signature >expect && + test_cmp expect output +' + test_expect_success 'format-patch --signature' ' - git format-patch --stdout --signature="my sig" -1 >output && - grep "my sig" output + git format-patch --stdout --signature="my sig" -1 | tail -n 3 >output && + signature "my sig" >expect && + test_cmp expect output ' test_expect_success 'format-patch with format.signature config' ' @@ -1073,6 +1086,15 @@ test_expect_success 'empty subject prefix does not have extra space' ' test_cmp expect actual ' +test_expect_success '--rfc' ' + cat >expect <<-\EOF && + Subject: [RFC PATCH 1/1] header with . in it + EOF + git format-patch -n -1 --stdout --rfc >patch && + grep ^Subject: patch >actual && + test_cmp expect actual +' + test_expect_success '--from=ident notices bogus ident' ' test_must_fail git format-patch -1 --stdout --from=foo >patch ' @@ -1502,12 +1524,12 @@ test_expect_success 'format-patch -o overrides format.outputDirectory' ' test_expect_success 'format-patch --base' ' git checkout side && - git format-patch --stdout --base=HEAD~3 -1 >patch && - grep "^base-commit:" patch >actual && - grep "^prerequisite-patch-id:" patch >>actual && - echo "base-commit: $(git rev-parse HEAD~3)" >expected && + git format-patch --stdout --base=HEAD~3 -1 | tail -n 7 >actual && + echo >expected && + echo "base-commit: $(git rev-parse HEAD~3)" >>expected && echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --stable | awk "{print \$1}")" >>expected && echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --stable | awk "{print \$1}")" >>expected && + signature >> expected && test_cmp expected actual ' @@ -1605,6 +1627,14 @@ test_expect_success 'format-patch --base overrides format.useAutoBase' ' test_cmp expected actual ' +test_expect_success 'format-patch --base with --attach' ' + git format-patch --attach=mimemime --stdout --base=HEAD~ -1 >patch && + sed -n -e "/^base-commit:/s/.*/1/p" -e "/^---*mimemime--$/s/.*/2/p" \ + patch >actual && + test_write_lines 1 2 >expect && + test_cmp expect actual +' + test_expect_success 'format-patch --pretty=mboxrd' ' sp=" " && cat >msg <<-INPUT_END && diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index 2434157aa7..289806d0c7 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -869,7 +869,8 @@ test_expect_success 'diff that introduces and removes ws breakages' ' test_cmp expected current ' -test_expect_success 'the same with --ws-error-highlight' ' +test_expect_success 'ws-error-highlight test setup' ' + git reset --hard && { echo "0. blank-at-eol " && @@ -882,10 +883,7 @@ test_expect_success 'the same with --ws-error-highlight' ' echo "2. and a new line " } >x && - git -c color.diff=always diff --ws-error-highlight=default,old | - test_decode_color >current && - - cat >expected <<-\EOF && + cat >expect.default-old <<-\EOF && <BOLD>diff --git a/x b/x<RESET> <BOLD>index d0233a2..700886e 100644<RESET> <BOLD>--- a/x<RESET> @@ -897,12 +895,7 @@ test_expect_success 'the same with --ws-error-highlight' ' <GREEN>+<RESET><GREEN>2. and a new line<RESET><BLUE> <RESET> EOF - test_cmp expected current && - - git -c color.diff=always diff --ws-error-highlight=all | - test_decode_color >current && - - cat >expected <<-\EOF && + cat >expect.all <<-\EOF && <BOLD>diff --git a/x b/x<RESET> <BOLD>index d0233a2..700886e 100644<RESET> <BOLD>--- a/x<RESET> @@ -914,12 +907,7 @@ test_expect_success 'the same with --ws-error-highlight' ' <GREEN>+<RESET><GREEN>2. and a new line<RESET><BLUE> <RESET> EOF - test_cmp expected current && - - git -c color.diff=always diff --ws-error-highlight=none | - test_decode_color >current && - - cat >expected <<-\EOF && + cat >expect.none <<-\EOF <BOLD>diff --git a/x b/x<RESET> <BOLD>index d0233a2..700886e 100644<RESET> <BOLD>--- a/x<RESET> @@ -931,7 +919,57 @@ test_expect_success 'the same with --ws-error-highlight' ' <GREEN>+2. and a new line <RESET> EOF - test_cmp expected current +' + +test_expect_success 'test --ws-error-highlight option' ' + + git -c color.diff=always diff --ws-error-highlight=default,old | + test_decode_color >current && + test_cmp expect.default-old current && + + git -c color.diff=always diff --ws-error-highlight=all | + test_decode_color >current && + test_cmp expect.all current && + + git -c color.diff=always diff --ws-error-highlight=none | + test_decode_color >current && + test_cmp expect.none current + +' + +test_expect_success 'test diff.wsErrorHighlight config' ' + + git -c color.diff=always -c diff.wsErrorHighlight=default,old diff | + test_decode_color >current && + test_cmp expect.default-old current && + + git -c color.diff=always -c diff.wsErrorHighlight=all diff | + test_decode_color >current && + test_cmp expect.all current && + + git -c color.diff=always -c diff.wsErrorHighlight=none diff | + test_decode_color >current && + test_cmp expect.none current + +' + +test_expect_success 'option overrides diff.wsErrorHighlight' ' + + git -c color.diff=always -c diff.wsErrorHighlight=none \ + diff --ws-error-highlight=default,old | + test_decode_color >current && + test_cmp expect.default-old current && + + git -c color.diff=always -c diff.wsErrorHighlight=default \ + diff --ws-error-highlight=all | + test_decode_color >current && + test_cmp expect.all current && + + git -c color.diff=always -c diff.wsErrorHighlight=all \ + diff --ws-error-highlight=none | + test_decode_color >current && + test_cmp expect.none current + ' test_done diff --git a/t/t4051-diff-function-context.sh b/t/t4051-diff-function-context.sh index b79b87790b..6154acb456 100755 --- a/t/t4051-diff-function-context.sh +++ b/t/t4051-diff-function-context.sh @@ -67,6 +67,15 @@ test_expect_success 'setup' ' commit_and_tag long_common_tail file.c && git checkout initial && + cat "$dir/hello.c" "$dir/dummy.c" >file.c && + commit_and_tag hello_dummy file.c && + + # overlap function context of 1st change and -u context of 2nd change + grep -v "delete me from hello" <"$dir/hello.c" >file.c && + sed 2p <"$dir/dummy.c" >>file.c && + commit_and_tag changed_hello_dummy file.c && + + git checkout initial && grep -v "delete me from hello" <file.c >file.c.new && mv file.c.new file.c && cat "$dir/appended1.c" >>file.c && @@ -179,4 +188,20 @@ test_expect_success ' context does not include other functions' ' test $(grep -c "^[ +-].*Begin" changed_hello_appended.diff) -le 2 ' +check_diff changed_hello_dummy 'changed two consecutive functions' + +test_expect_success ' context includes begin' ' + grep "^ .*Begin of hello" changed_hello_dummy.diff && + grep "^ .*Begin of dummy" changed_hello_dummy.diff +' + +test_expect_success ' context includes end' ' + grep "^ .*End of hello" changed_hello_dummy.diff && + grep "^ .*End of dummy" changed_hello_dummy.diff +' + +test_expect_success ' overlapping hunks are merged' ' + test $(grep -c "^@@" changed_hello_dummy.diff) -eq 1 +' + test_done diff --git a/t/t4053-diff-no-index.sh b/t/t4053-diff-no-index.sh index 6eb83211b5..453e6c35eb 100755 --- a/t/t4053-diff-no-index.sh +++ b/t/t4053-diff-no-index.sh @@ -89,4 +89,42 @@ test_expect_success 'turning a file into a directory' ' ) ' +test_expect_success 'diff from repo subdir shows real paths (explicit)' ' + echo "diff --git a/../../non/git/a b/../../non/git/b" >expect && + test_expect_code 1 \ + git -C repo/sub \ + diff --no-index ../../non/git/a ../../non/git/b >actual && + head -n 1 <actual >actual.head && + test_cmp expect actual.head +' + +test_expect_success 'diff from repo subdir shows real paths (implicit)' ' + echo "diff --git a/../../non/git/a b/../../non/git/b" >expect && + test_expect_code 1 \ + git -C repo/sub \ + diff ../../non/git/a ../../non/git/b >actual && + head -n 1 <actual >actual.head && + test_cmp expect actual.head +' + +test_expect_success 'diff --no-index from repo subdir respects config (explicit)' ' + echo "diff --git ../../non/git/a ../../non/git/b" >expect && + test_config -C repo diff.noprefix true && + test_expect_code 1 \ + git -C repo/sub \ + diff --no-index ../../non/git/a ../../non/git/b >actual && + head -n 1 <actual >actual.head && + test_cmp expect actual.head +' + +test_expect_success 'diff --no-index from repo subdir respects config (implicit)' ' + echo "diff --git ../../non/git/a ../../non/git/b" >expect && + test_config -C repo diff.noprefix true && + test_expect_code 1 \ + git -C repo/sub \ + diff ../../non/git/a ../../non/git/b >actual && + head -n 1 <actual >actual.head && + test_cmp expect actual.head +' + test_done diff --git a/t/t4061-diff-indent.sh b/t/t4061-diff-indent.sh new file mode 100755 index 0000000000..556450609b --- /dev/null +++ b/t/t4061-diff-indent.sh @@ -0,0 +1,216 @@ +#!/bin/sh + +test_description='Test diff indent heuristic. + +' +. ./test-lib.sh +. "$TEST_DIRECTORY"/diff-lib.sh + +# Compare two diff outputs. Ignore "index" lines, because we don't +# care about SHA-1s or file modes. +compare_diff () { + sed -e "/^index /d" <"$1" >.tmp-1 + sed -e "/^index /d" <"$2" >.tmp-2 + test_cmp .tmp-1 .tmp-2 && rm -f .tmp-1 .tmp-2 +} + +# Compare blame output using the expectation for a diff as reference. +# Only look for the lines coming from non-boundary commits. +compare_blame () { + sed -n -e "1,4d" -e "s/^\+//p" <"$1" >.tmp-1 + sed -ne "s/^[^^][^)]*) *//p" <"$2" >.tmp-2 + test_cmp .tmp-1 .tmp-2 && rm -f .tmp-1 .tmp-2 +} + +test_expect_success 'prepare' ' + cat <<-\EOF >spaces.txt && + 1 + 2 + a + + b + 3 + 4 + EOF + + cat <<-\EOF >functions.c && + 1 + 2 + /* function */ + foo() { + foo + } + + 3 + 4 + EOF + + git add spaces.txt functions.c && + test_tick && + git commit -m initial && + git branch old && + + cat <<-\EOF >spaces.txt && + 1 + 2 + a + + b + a + + b + 3 + 4 + EOF + + cat <<-\EOF >functions.c && + 1 + 2 + /* function */ + bar() { + foo + } + + /* function */ + foo() { + foo + } + + 3 + 4 + EOF + + git add spaces.txt functions.c && + test_tick && + git commit -m initial && + git branch new && + + tr "_" " " <<-\EOF >spaces-expect && + diff --git a/spaces.txt b/spaces.txt + --- a/spaces.txt + +++ b/spaces.txt + @@ -3,5 +3,8 @@ + a + _ + b + +a + + + +b + 3 + 4 + EOF + + tr "_" " " <<-\EOF >spaces-compacted-expect && + diff --git a/spaces.txt b/spaces.txt + --- a/spaces.txt + +++ b/spaces.txt + @@ -2,6 +2,9 @@ + 2 + a + _ + +b + +a + + + b + 3 + 4 + EOF + + tr "_" " " <<-\EOF >functions-expect && + diff --git a/functions.c b/functions.c + --- a/functions.c + +++ b/functions.c + @@ -1,6 +1,11 @@ + 1 + 2 + /* function */ + +bar() { + + foo + +} + + + +/* function */ + foo() { + foo + } + EOF + + tr "_" " " <<-\EOF >functions-compacted-expect + diff --git a/functions.c b/functions.c + --- a/functions.c + +++ b/functions.c + @@ -1,5 +1,10 @@ + 1 + 2 + +/* function */ + +bar() { + + foo + +} + + + /* function */ + foo() { + foo + EOF +' + +test_expect_success 'diff: ugly spaces' ' + git diff old new -- spaces.txt >out && + compare_diff spaces-expect out +' + +test_expect_success 'diff: nice spaces with --indent-heuristic' ' + git diff --indent-heuristic old new -- spaces.txt >out-compacted && + compare_diff spaces-compacted-expect out-compacted +' + +test_expect_success 'diff: nice spaces with diff.indentHeuristic' ' + git -c diff.indentHeuristic=true diff old new -- spaces.txt >out-compacted2 && + compare_diff spaces-compacted-expect out-compacted2 +' + +test_expect_success 'diff: --no-indent-heuristic overrides config' ' + git -c diff.indentHeuristic=true diff --no-indent-heuristic old new -- spaces.txt >out2 && + compare_diff spaces-expect out2 +' + +test_expect_success 'diff: --indent-heuristic with --patience' ' + git diff --indent-heuristic --patience old new -- spaces.txt >out-compacted3 && + compare_diff spaces-compacted-expect out-compacted3 +' + +test_expect_success 'diff: --indent-heuristic with --histogram' ' + git diff --indent-heuristic --histogram old new -- spaces.txt >out-compacted4 && + compare_diff spaces-compacted-expect out-compacted4 +' + +test_expect_success 'diff: ugly functions' ' + git diff old new -- functions.c >out && + compare_diff functions-expect out +' + +test_expect_success 'diff: nice functions with --indent-heuristic' ' + git diff --indent-heuristic old new -- functions.c >out-compacted && + compare_diff functions-compacted-expect out-compacted +' + +test_expect_success 'blame: ugly spaces' ' + git blame old..new -- spaces.txt >out-blame && + compare_blame spaces-expect out-blame +' + +test_expect_success 'blame: nice spaces with --indent-heuristic' ' + git blame --indent-heuristic old..new -- spaces.txt >out-blame-compacted && + compare_blame spaces-compacted-expect out-blame-compacted +' + +test_expect_success 'blame: nice spaces with diff.indentHeuristic' ' + git -c diff.indentHeuristic=true blame old..new -- spaces.txt >out-blame-compacted2 && + compare_blame spaces-compacted-expect out-blame-compacted2 +' + +test_expect_success 'blame: --no-indent-heuristic overrides config' ' + git -c diff.indentHeuristic=true blame --no-indent-heuristic old..new -- spaces.txt >out-blame2 && + git blame old..new -- spaces.txt >out-blame && + compare_blame spaces-expect out-blame2 +' + +test_done diff --git a/t/t4062-diff-pickaxe.sh b/t/t4062-diff-pickaxe.sh new file mode 100755 index 0000000000..f0bf50bda7 --- /dev/null +++ b/t/t4062-diff-pickaxe.sh @@ -0,0 +1,22 @@ +#!/bin/sh +# +# Copyright (c) 2016 Johannes Schindelin +# + +test_description='Pickaxe options' + +. ./test-lib.sh + +test_expect_success setup ' + test_commit initial && + printf "%04096d" 0 >4096-zeroes.txt && + git add 4096-zeroes.txt && + test_tick && + git commit -m "A 4k file" +' +test_expect_success '-G matches' ' + git diff --name-only -G "^0{4096}$" HEAD^ >out && + test 4096-zeroes.txt = "$(cat out)" +' + +test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 9ce9424d15..89a5bacac5 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -977,4 +977,27 @@ test_expect_success 'am --patch-format=mboxrd handles mboxrd' ' test_cmp msg out ' +test_expect_success 'am works with multi-line in-body headers' ' + FORTY="String that has a length of more than forty characters" && + LONG="$FORTY $FORTY" && + rm -fr .git/rebase-apply && + git checkout -f first && + echo one >> file && + git commit -am "$LONG" --author="$LONG <long@example.com>" && + git format-patch --stdout -1 >patch && + # bump from, date, and subject down to in-body header + perl -lpe " + if (/^From:/) { + print \"From: x <x\@example.com>\"; + print \"Date: Sat, 1 Jan 2000 00:00:00 +0000\"; + print \"Subject: x\n\"; + } + " patch >msg && + git checkout HEAD^ && + git am msg && + # Ensure that the author and full message are present + git cat-file commit HEAD | grep "^author.*long@example.com" && + git cat-file commit HEAD | grep "^$LONG" +' + test_done diff --git a/t/t4204-patch-id.sh b/t/t4204-patch-id.sh index 84a809690e..0288c17ec6 100755 --- a/t/t4204-patch-id.sh +++ b/t/t4204-patch-id.sh @@ -143,6 +143,20 @@ test_expect_success 'patch-id supports git-format-patch MIME output' ' test_cmp patch-id_master patch-id_same ' +test_expect_success 'patch-id respects config from subdir' ' + test_config patchid.stable true && + mkdir subdir && + + # copy these because test_patch_id() looks for them in + # the current directory + cp bar-then-foo foo-then-bar subdir && + + ( + cd subdir && + test_patch_id irrelevant patchid.stable=true + ) +' + cat >nonl <<\EOF diff --git i/a w/a index e69de29..2e65efe 100644 diff --git a/t/t4254-am-corrupt.sh b/t/t4254-am-corrupt.sh index 85716dd6ec..168739c721 100755 --- a/t/t4254-am-corrupt.sh +++ b/t/t4254-am-corrupt.sh @@ -29,9 +29,9 @@ test_expect_success 'try to apply corrupted patch' ' ' test_expect_success 'compare diagnostic; ensure file is still here' ' - echo "fatal: git diff header lacks filename information (line 4)" >expected && + echo "error: git diff header lacks filename information (line 4)" >expected && test_path_is_file f && - test_cmp expected actual + test_i18ncmp expected actual ' test_done diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 80b2387341..886b6953e4 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -179,6 +179,15 @@ test_expect_success 'git archive --remote' \ 'git archive --remote=. HEAD >b5.tar && test_cmp_bin b.tar b5.tar' +test_expect_success 'git archive --remote with configured remote' ' + git config remote.foo.url . && + ( + cd a && + git archive --remote=foo --output=../b5-nick.tar HEAD + ) && + test_cmp_bin b.tar b5-nick.tar +' + test_expect_success \ 'validate file modification time' \ 'mkdir extract && @@ -197,9 +206,15 @@ test_expect_success 'git archive with --output, override inferred format' ' test_cmp_bin b.tar d4.zip ' -test_expect_success \ - 'git archive --list outside of a git repo' \ - 'GIT_DIR=some/non-existing/directory git archive --list' +test_expect_success 'git archive --list outside of a git repo' ' + nongit git archive --list +' + +test_expect_success 'git archive --remote outside of a git repo' ' + git archive HEAD >expect.tar && + nongit git archive --remote="$PWD" HEAD >actual.tar && + test_cmp_bin expect.tar actual.tar +' test_expect_success 'clients cannot access unreachable commits' ' test_commit unreachable && diff --git a/t/t5100-mailinfo.sh b/t/t5100-mailinfo.sh index 1a5a546230..7171f67539 100755 --- a/t/t5100-mailinfo.sh +++ b/t/t5100-mailinfo.sh @@ -7,37 +7,39 @@ test_description='git mailinfo and git mailsplit test' . ./test-lib.sh +DATA="$TEST_DIRECTORY/t5100" + test_expect_success 'split sample box' \ - 'git mailsplit -o. "$TEST_DIRECTORY"/t5100/sample.mbox >last && + 'git mailsplit -o. "$DATA/sample.mbox" >last && last=$(cat last) && echo total is $last && - test $(cat last) = 17' + test $(cat last) = 18' check_mailinfo () { mail=$1 opt=$2 mo="$mail$opt" - git mailinfo -u $opt msg$mo patch$mo <$mail >info$mo && - test_cmp "$TEST_DIRECTORY"/t5100/msg$mo msg$mo && - test_cmp "$TEST_DIRECTORY"/t5100/patch$mo patch$mo && - test_cmp "$TEST_DIRECTORY"/t5100/info$mo info$mo + git mailinfo -u $opt "msg$mo" "patch$mo" <"$mail" >"info$mo" && + test_cmp "$DATA/msg$mo" "msg$mo" && + test_cmp "$DATA/patch$mo" "patch$mo" && + test_cmp "$DATA/info$mo" "info$mo" } for mail in 00* do test_expect_success "mailinfo $mail" ' - check_mailinfo $mail "" && - if test -f "$TEST_DIRECTORY"/t5100/msg$mail--scissors + check_mailinfo "$mail" "" && + if test -f "$DATA/msg$mail--scissors" then - check_mailinfo $mail --scissors + check_mailinfo "$mail" --scissors fi && - if test -f "$TEST_DIRECTORY"/t5100/msg$mail--no-inbody-headers + if test -f "$DATA/msg$mail--no-inbody-headers" then - check_mailinfo $mail --no-inbody-headers + check_mailinfo "$mail" --no-inbody-headers fi && - if test -f "$TEST_DIRECTORY"/t5100/msg$mail--message-id + if test -f "$DATA/msg$mail--message-id" then - check_mailinfo $mail --message-id + check_mailinfo "$mail" --message-id fi ' done @@ -45,7 +47,7 @@ done test_expect_success 'split box with rfc2047 samples' \ 'mkdir rfc2047 && - git mailsplit -orfc2047 "$TEST_DIRECTORY"/t5100/rfc2047-samples.mbox \ + git mailsplit -orfc2047 "$DATA/rfc2047-samples.mbox" \ >rfc2047/last && last=$(cat rfc2047/last) && echo total is $last && @@ -54,20 +56,20 @@ test_expect_success 'split box with rfc2047 samples' \ for mail in rfc2047/00* do test_expect_success "mailinfo $mail" ' - git mailinfo -u $mail-msg $mail-patch <$mail >$mail-info && + git mailinfo -u "$mail-msg" "$mail-patch" <"$mail" >"$mail-info" && echo msg && - test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-msg && + test_cmp "$DATA/empty" "$mail-msg" && echo patch && - test_cmp "$TEST_DIRECTORY"/t5100/empty $mail-patch && + test_cmp "$DATA/empty" "$mail-patch" && echo info && - test_cmp "$TEST_DIRECTORY"/t5100/rfc2047-info-$(basename $mail) $mail-info + test_cmp "$DATA/rfc2047-info-$(basename $mail)" "$mail-info" ' done test_expect_success 'respect NULs' ' - git mailsplit -d3 -o. "$TEST_DIRECTORY"/t5100/nul-plain && - test_cmp "$TEST_DIRECTORY"/t5100/nul-plain 001 && + git mailsplit -d3 -o. "$DATA/nul-plain" && + test_cmp "$DATA/nul-plain" 001 && (cat 001 | git mailinfo msg patch) && test_line_count = 4 patch @@ -75,52 +77,52 @@ test_expect_success 'respect NULs' ' test_expect_success 'Preserve NULs out of MIME encoded message' ' - git mailsplit -d5 -o. "$TEST_DIRECTORY"/t5100/nul-b64.in && - test_cmp "$TEST_DIRECTORY"/t5100/nul-b64.in 00001 && + git mailsplit -d5 -o. "$DATA/nul-b64.in" && + test_cmp "$DATA/nul-b64.in" 00001 && git mailinfo msg patch <00001 && - test_cmp "$TEST_DIRECTORY"/t5100/nul-b64.expect patch + test_cmp "$DATA/nul-b64.expect" patch ' test_expect_success 'mailinfo on from header without name works' ' mkdir info-from && - git mailsplit -oinfo-from "$TEST_DIRECTORY"/t5100/info-from.in && - test_cmp "$TEST_DIRECTORY"/t5100/info-from.in info-from/0001 && + git mailsplit -oinfo-from "$DATA/info-from.in" && + test_cmp "$DATA/info-from.in" info-from/0001 && git mailinfo info-from/msg info-from/patch \ <info-from/0001 >info-from/out && - test_cmp "$TEST_DIRECTORY"/t5100/info-from.expect info-from/out + test_cmp "$DATA/info-from.expect" info-from/out ' test_expect_success 'mailinfo finds headers after embedded From line' ' mkdir embed-from && - git mailsplit -oembed-from "$TEST_DIRECTORY"/t5100/embed-from.in && - test_cmp "$TEST_DIRECTORY"/t5100/embed-from.in embed-from/0001 && + git mailsplit -oembed-from "$DATA/embed-from.in" && + test_cmp "$DATA/embed-from.in" embed-from/0001 && git mailinfo embed-from/msg embed-from/patch \ <embed-from/0001 >embed-from/out && - test_cmp "$TEST_DIRECTORY"/t5100/embed-from.expect embed-from/out + test_cmp "$DATA/embed-from.expect" embed-from/out ' test_expect_success 'mailinfo on message with quoted >From' ' mkdir quoted-from && - git mailsplit -oquoted-from "$TEST_DIRECTORY"/t5100/quoted-from.in && - test_cmp "$TEST_DIRECTORY"/t5100/quoted-from.in quoted-from/0001 && + git mailsplit -oquoted-from "$DATA/quoted-from.in" && + test_cmp "$DATA/quoted-from.in" quoted-from/0001 && git mailinfo quoted-from/msg quoted-from/patch \ <quoted-from/0001 >quoted-from/out && - test_cmp "$TEST_DIRECTORY"/t5100/quoted-from.expect quoted-from/msg + test_cmp "$DATA/quoted-from.expect" quoted-from/msg ' test_expect_success 'mailinfo unescapes with --mboxrd' ' mkdir mboxrd && git mailsplit -omboxrd --mboxrd \ - "$TEST_DIRECTORY"/t5100/sample.mboxrd >last && + "$DATA/sample.mboxrd" >last && test x"$(cat last)" = x2 && for i in 0001 0002 do git mailinfo mboxrd/msg mboxrd/patch \ <mboxrd/$i >mboxrd/out && - test_cmp "$TEST_DIRECTORY"/t5100/${i}mboxrd mboxrd/msg + test_cmp "$DATA/${i}mboxrd" mboxrd/msg done && sp=" " && echo "From " >expect && @@ -142,4 +144,31 @@ test_expect_success 'mailinfo unescapes with --mboxrd' ' test_cmp expect mboxrd/msg ' +test_expect_success 'mailinfo handles rfc2822 quoted-string' ' + mkdir quoted-string && + git mailinfo /dev/null /dev/null <"$DATA/quoted-string.in" \ + >quoted-string/info && + test_cmp "$DATA/quoted-string.expect" quoted-string/info +' + +test_expect_success 'mailinfo handles rfc2822 comment' ' + mkdir comment && + git mailinfo /dev/null /dev/null <"$DATA/comment.in" \ + >comment/info && + test_cmp "$DATA/comment.expect" comment/info +' + +test_expect_success 'mailinfo with mailinfo.scissors config' ' + test_config mailinfo.scissors true && + ( + mkdir sub && + cd sub && + git mailinfo ../msg0014.sc ../patch0014.sc <../0014 >../info0014.sc + ) && + test_cmp "$DATA/msg0014--scissors" msg0014.sc && + test_cmp "$DATA/patch0014--scissors" patch0014.sc && + test_cmp "$DATA/info0014--scissors" info0014.sc +' + + test_done diff --git a/t/t5100/comment.expect b/t/t5100/comment.expect new file mode 100644 index 0000000000..7228177984 --- /dev/null +++ b/t/t5100/comment.expect @@ -0,0 +1,5 @@ +Author: A U Thor (this is (really) a comment (honestly)) +Email: somebody@example.com +Subject: testing comments +Date: Sun, 25 May 2008 00:38:18 -0700 + diff --git a/t/t5100/comment.in b/t/t5100/comment.in new file mode 100644 index 0000000000..c53a192dfe --- /dev/null +++ b/t/t5100/comment.in @@ -0,0 +1,9 @@ +From 1234567890123456789012345678901234567890 Mon Sep 17 00:00:00 2001 +From: "A U Thor" <somebody@example.com> (this is \(really\) a comment (honestly)) +Date: Sun, 25 May 2008 00:38:18 -0700 +Subject: [PATCH] testing comments + + + +--- +patch diff --git a/t/t5100/info0018 b/t/t5100/info0018 new file mode 100644 index 0000000000..d53e7491c7 --- /dev/null +++ b/t/t5100/info0018 @@ -0,0 +1,5 @@ +Author: Another Thor +Email: a.thor@example.com +Subject: This one contains a tab and a space +Date: Fri, 9 Jun 2006 00:44:16 -0700 + diff --git a/t/t5100/info0018--no-inbody-headers b/t/t5100/info0018--no-inbody-headers new file mode 100644 index 0000000000..30b17bd913 --- /dev/null +++ b/t/t5100/info0018--no-inbody-headers @@ -0,0 +1,5 @@ +Author: A U Thor +Email: a.u.thor@example.com +Subject: check multiline inbody headers +Date: Fri, 9 Jun 2006 00:44:16 -0700 + diff --git a/t/t5100/msg0015 b/t/t5100/msg0015 index 4abb3d5c6c..e69de29bb2 100644 --- a/t/t5100/msg0015 +++ b/t/t5100/msg0015 @@ -1,2 +0,0 @@ - - a list - - of stuff diff --git a/t/t5100/msg0018 b/t/t5100/msg0018 new file mode 100644 index 0000000000..56de83d7fc --- /dev/null +++ b/t/t5100/msg0018 @@ -0,0 +1,2 @@ +a commit message + diff --git a/t/t5100/msg0018--no-inbody-headers b/t/t5100/msg0018--no-inbody-headers new file mode 100644 index 0000000000..b1e05d3862 --- /dev/null +++ b/t/t5100/msg0018--no-inbody-headers @@ -0,0 +1,8 @@ +From: Another Thor + <a.thor@example.com> +Subject: This one contains + a tab + and a space + +a commit message + diff --git a/t/t5100/patch0018 b/t/t5100/patch0018 new file mode 100644 index 0000000000..789df6d030 --- /dev/null +++ b/t/t5100/patch0018 @@ -0,0 +1,6 @@ +diff --git a/foo b/foo +index e69de29..d95f3ad 100644 +--- a/foo ++++ b/foo +@@ -0,0 +1 @@ ++content diff --git a/t/t5100/patch0018--no-inbody-headers b/t/t5100/patch0018--no-inbody-headers new file mode 100644 index 0000000000..789df6d030 --- /dev/null +++ b/t/t5100/patch0018--no-inbody-headers @@ -0,0 +1,6 @@ +diff --git a/foo b/foo +index e69de29..d95f3ad 100644 +--- a/foo ++++ b/foo +@@ -0,0 +1 @@ ++content diff --git a/t/t5100/quoted-string.expect b/t/t5100/quoted-string.expect new file mode 100644 index 0000000000..cab1bcebf9 --- /dev/null +++ b/t/t5100/quoted-string.expect @@ -0,0 +1,5 @@ +Author: Author "The Author" Name +Email: somebody@example.com +Subject: testing quoted-pair +Date: Sun, 25 May 2008 00:38:18 -0700 + diff --git a/t/t5100/quoted-string.in b/t/t5100/quoted-string.in new file mode 100644 index 0000000000..e2e627ae23 --- /dev/null +++ b/t/t5100/quoted-string.in @@ -0,0 +1,9 @@ +From 1234567890123456789012345678901234567890 Mon Sep 17 00:00:00 2001 +From: "Author \"The Author\" Name" <somebody@example.com> +Date: Sun, 25 May 2008 00:38:18 -0700 +Subject: [PATCH] testing quoted-pair + + + +--- +patch diff --git a/t/t5100/sample.mbox b/t/t5100/sample.mbox index 8b2ae064c3..6d4d0e4474 100644 --- a/t/t5100/sample.mbox +++ b/t/t5100/sample.mbox @@ -699,3 +699,22 @@ index e69de29..d95f3ad 100644 +++ b/foo @@ -0,0 +1 @@ +New content +From nobody Mon Sep 17 00:00:00 2001 +From: A U Thor <a.u.thor@example.com> +Subject: check multiline inbody headers +Date: Fri, 9 Jun 2006 00:44:16 -0700 + +From: Another Thor + <a.thor@example.com> +Subject: This one contains + a tab + and a space + +a commit message + +diff --git a/foo b/foo +index e69de29..d95f3ad 100644 +--- a/foo ++++ b/foo +@@ -0,0 +1 @@ ++content diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 899e52d50f..43a672c345 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -406,6 +406,21 @@ test_expect_success 'verify resulting packs' ' git verify-pack test-11-*.pack ' +test_expect_success 'set up pack for non-repo tests' ' + # make sure we have a pack with no matching index file + cp test-1-*.pack foo.pack +' + +test_expect_success 'index-pack --stdin complains of non-repo' ' + nongit test_must_fail git index-pack --stdin <foo.pack && + test_path_is_missing non-repo/.git +' + +test_expect_success 'index-pack <pack> works in non-repo' ' + nongit git index-pack ../foo.pack && + test_path_is_file foo.idx +' + # # WARNING! # diff --git a/t/t5305-include-tag.sh b/t/t5305-include-tag.sh index f314ad5079..a5eca210b8 100755 --- a/t/t5305-include-tag.sh +++ b/t/t5305-include-tag.sh @@ -25,58 +25,94 @@ test_expect_success setup ' } >obj-list ' -rm -rf clone.git test_expect_success 'pack without --include-tag' ' - packname_1=$(git pack-objects \ + packname=$(git pack-objects \ --window=0 \ - test-1 <obj-list) + test-no-include <obj-list) ' test_expect_success 'unpack objects' ' - ( - GIT_DIR=clone.git && - export GIT_DIR && - git init && - git unpack-objects -n <test-1-${packname_1}.pack && - git unpack-objects <test-1-${packname_1}.pack - ) + rm -rf clone.git && + git init clone.git && + git -C clone.git unpack-objects <test-no-include-${packname}.pack ' test_expect_success 'check unpacked result (have commit, no tag)' ' git rev-list --objects $commit >list.expect && - ( - test_must_fail env GIT_DIR=clone.git git cat-file -e $tag && - git rev-list --objects $commit - ) >list.actual && + test_must_fail git -C clone.git cat-file -e $tag && + git -C clone.git rev-list --objects $commit >list.actual && test_cmp list.expect list.actual ' -rm -rf clone.git test_expect_success 'pack with --include-tag' ' - packname_1=$(git pack-objects \ + packname=$(git pack-objects \ --window=0 \ --include-tag \ - test-2 <obj-list) + test-include <obj-list) ' test_expect_success 'unpack objects' ' - ( - GIT_DIR=clone.git && - export GIT_DIR && - git init && - git unpack-objects -n <test-2-${packname_1}.pack && - git unpack-objects <test-2-${packname_1}.pack - ) + rm -rf clone.git && + git init clone.git && + git -C clone.git unpack-objects <test-include-${packname}.pack ' test_expect_success 'check unpacked result (have commit, have tag)' ' git rev-list --objects mytag >list.expect && - ( - GIT_DIR=clone.git && - export GIT_DIR && - git rev-list --objects $tag - ) >list.actual && + git -C clone.git rev-list --objects $tag >list.actual && test_cmp list.expect list.actual ' +# A tag of a tag, where the "inner" tag is not otherwise +# reachable, and a full peel points to a commit reachable from HEAD. +test_expect_success 'create hidden inner tag' ' + test_commit commit && + git tag -m inner inner HEAD && + git tag -m outer outer inner && + git tag -d inner +' + +test_expect_success 'pack explicit outer tag' ' + packname=$( + { + echo HEAD && + echo outer + } | + git pack-objects --revs test-hidden-explicit + ) +' + +test_expect_success 'unpack objects' ' + rm -rf clone.git && + git init clone.git && + git -C clone.git unpack-objects <test-hidden-explicit-${packname}.pack +' + +test_expect_success 'check unpacked result (have all objects)' ' + git -C clone.git rev-list --objects $(git rev-parse outer HEAD) +' + +test_expect_success 'pack implied outer tag' ' + packname=$( + echo HEAD | + git pack-objects --revs --include-tag test-hidden-implied + ) +' + +test_expect_success 'unpack objects' ' + rm -rf clone.git && + git init clone.git && + git -C clone.git unpack-objects <test-hidden-implied-${packname}.pack +' + +test_expect_success 'check unpacked result (have all objects)' ' + git -C clone.git rev-list --objects $(git rev-parse outer HEAD) +' + +test_expect_success 'single-branch clone can transfer tag' ' + rm -rf clone.git && + git clone --no-local --single-branch -b master . clone.git && + git -C clone.git fsck +' + test_done diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index 3893afd687..b4c7a6ff6b 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -7,6 +7,18 @@ objpath () { echo ".git/objects/$(echo "$1" | sed -e 's|\(..\)|\1/|')" } +# show objects present in pack ($1 should be associated *.idx) +list_packed_objects () { + git show-index <"$1" | cut -d' ' -f2 +} + +# has_any pattern-file content-file +# tests whether content-file has any entry from pattern-file with entries being +# whole lines. +has_any () { + grep -Ff "$1" "$2" +} + test_expect_success 'setup repo with moderate-sized history' ' for i in $(test_seq 1 10); do test_commit $i @@ -16,6 +28,7 @@ test_expect_success 'setup repo with moderate-sized history' ' test_commit side-$i done && git checkout master && + bitmaptip=$(git rev-parse master) && blob=$(echo tagged-blob | git hash-object -w --stdin) && git tag tagged-blob $blob && git config repack.writebitmaps true && @@ -118,6 +131,83 @@ test_expect_success 'incremental repack can disable bitmaps' ' git repack -d --no-write-bitmap-index ' +test_expect_success 'pack-objects respects --local (non-local loose)' ' + git init --bare alt.git && + echo $(pwd)/alt.git/objects >.git/objects/info/alternates && + echo content1 >file1 && + # non-local loose object which is not present in bitmapped pack + altblob=$(GIT_DIR=alt.git git hash-object -w file1) && + # non-local loose object which is also present in bitmapped pack + git cat-file blob $blob | GIT_DIR=alt.git git hash-object -w --stdin && + git add file1 && + test_tick && + git commit -m commit_file1 && + echo HEAD | git pack-objects --local --stdout --revs >1.pack && + git index-pack 1.pack && + list_packed_objects 1.idx >1.objects && + printf "%s\n" "$altblob" "$blob" >nonlocal-loose && + ! has_any nonlocal-loose 1.objects +' + +test_expect_success 'pack-objects respects --honor-pack-keep (local non-bitmapped pack)' ' + echo content2 >file2 && + blob2=$(git hash-object -w file2) && + git add file2 && + test_tick && + git commit -m commit_file2 && + printf "%s\n" "$blob2" "$bitmaptip" >keepobjects && + pack2=$(git pack-objects pack2 <keepobjects) && + mv pack2-$pack2.* .git/objects/pack/ && + >.git/objects/pack/pack2-$pack2.keep && + rm $(objpath $blob2) && + echo HEAD | git pack-objects --honor-pack-keep --stdout --revs >2a.pack && + git index-pack 2a.pack && + list_packed_objects 2a.idx >2a.objects && + ! has_any keepobjects 2a.objects +' + +test_expect_success 'pack-objects respects --local (non-local pack)' ' + mv .git/objects/pack/pack2-$pack2.* alt.git/objects/pack/ && + echo HEAD | git pack-objects --local --stdout --revs >2b.pack && + git index-pack 2b.pack && + list_packed_objects 2b.idx >2b.objects && + ! has_any keepobjects 2b.objects +' + +test_expect_success 'pack-objects respects --honor-pack-keep (local bitmapped pack)' ' + ls .git/objects/pack/ | grep bitmap >output && + test_line_count = 1 output && + packbitmap=$(basename $(cat output) .bitmap) && + list_packed_objects .git/objects/pack/$packbitmap.idx >packbitmap.objects && + test_when_finished "rm -f .git/objects/pack/$packbitmap.keep" && + >.git/objects/pack/$packbitmap.keep && + echo HEAD | git pack-objects --honor-pack-keep --stdout --revs >3a.pack && + git index-pack 3a.pack && + list_packed_objects 3a.idx >3a.objects && + ! has_any packbitmap.objects 3a.objects +' + +test_expect_success 'pack-objects respects --local (non-local bitmapped pack)' ' + mv .git/objects/pack/$packbitmap.* alt.git/objects/pack/ && + test_when_finished "mv alt.git/objects/pack/$packbitmap.* .git/objects/pack/" && + echo HEAD | git pack-objects --local --stdout --revs >3b.pack && + git index-pack 3b.pack && + list_packed_objects 3b.idx >3b.objects && + ! has_any packbitmap.objects 3b.objects +' + +test_expect_success 'pack-objects to file can use bitmap' ' + # make sure we still have 1 bitmap index from previous tests + ls .git/objects/pack/ | grep bitmap >output && + test_line_count = 1 output && + # verify equivalent packs are generated with/without using bitmap index + packasha1=$(git pack-objects --no-use-bitmap-index --all packa </dev/null) && + packbsha1=$(git pack-objects --use-bitmap-index --all packb </dev/null) && + list_packed_objects <packa-$packasha1.idx >packa.objects && + list_packed_objects <packb-$packbsha1.idx >packb.objects && + test_cmp packa.objects packb.objects +' + test_expect_success 'full repack, reusing previous bitmaps' ' git repack -ad && ls .git/objects/pack/ | grep bitmap >output && @@ -143,6 +233,20 @@ test_expect_success 'create objects for missing-HAVE tests' ' EOF ' +test_expect_success 'pack-objects respects --incremental' ' + cat >revs2 <<-EOF && + HEAD + $commit + EOF + git pack-objects --incremental --stdout --revs <revs2 >4.pack && + git index-pack 4.pack && + list_packed_objects 4.idx >4.objects && + test_line_count = 4 4.objects && + git rev-list --objects $commit >revlist && + cut -d" " -f1 revlist |sort >objects && + test_cmp 4.objects objects +' + test_expect_success 'pack with missing blob' ' rm $(objpath $blob) && git pack-objects --stdout --revs <revs >/dev/null @@ -158,10 +262,6 @@ test_expect_success 'pack with missing parent' ' git pack-objects --stdout --revs <revs >/dev/null ' -test_lazy_prereq JGIT ' - type jgit -' - test_expect_success JGIT 'we can read jgit bitmaps' ' git clone . compat-jgit && ( diff --git a/t/t5314-pack-cycle-detection.sh b/t/t5314-pack-cycle-detection.sh new file mode 100755 index 0000000000..f7dbdfb412 --- /dev/null +++ b/t/t5314-pack-cycle-detection.sh @@ -0,0 +1,113 @@ +#!/bin/sh + +test_description='test handling of inter-pack delta cycles during repack + +The goal here is to create a situation where we have two blobs, A and B, with A +as a delta against B in one pack, and vice versa in the other. Then if we can +persuade a full repack to find A from one pack and B from the other, that will +give us a cycle when we attempt to reuse those deltas. + +The trick is in the "persuade" step, as it depends on the internals of how +pack-objects picks which pack to reuse the deltas from. But we can assume +that it does so in one of two general strategies: + + 1. Using a static ordering of packs. In this case, no inter-pack cycles can + happen. Any objects with a delta relationship must be present in the same + pack (i.e., no "--thin" packs on disk), so we will find all related objects + from that pack. So assuming there are no cycles within a single pack (and + we avoid generating them via pack-objects or importing them via + index-pack), then our result will have no cycles. + + So this case should pass the tests no matter how we arrange things. + + 2. Picking the next pack to examine based on locality (i.e., where we found + something else recently). + + In this case, we want to make sure that we find the delta versions of A and + B and not their base versions. We can do this by putting two blobs in each + pack. The first is a "dummy" blob that can only be found in the pack in + question. And then the second is the actual delta we want to find. + + The two blobs must be present in the same tree, not present in other trees, + and the dummy pathname must sort before the delta path. + +The setup below focuses on case 2. We have two commits HEAD and HEAD^, each +which has two files: "dummy" and "file". Then we can make two packs which +contain: + + [pack one] + HEAD:dummy + HEAD:file (as delta against HEAD^:file) + HEAD^:file (as base) + + [pack two] + HEAD^:dummy + HEAD^:file (as delta against HEAD:file) + HEAD:file (as base) + +Then no matter which order we start looking at the packs in, we know that we +will always find a delta for "file", because its lookup will always come +immediately after the lookup for "dummy". +' +. ./test-lib.sh + + + +# Create a pack containing the the tree $1 and blob $1:file, with +# the latter stored as a delta against $2:file. +# +# We convince pack-objects to make the delta in the direction of our choosing +# by marking $2 as a preferred-base edge. That results in $1:file as a thin +# delta, and index-pack completes it by adding $2:file as a base. +# +# Note that the two variants of "file" must be similar enough to convince git +# to create the delta. +make_pack () { + { + printf '%s\n' "-$(git rev-parse $2)" + printf '%s dummy\n' "$(git rev-parse $1:dummy)" + printf '%s file\n' "$(git rev-parse $1:file)" + } | + git pack-objects --stdout | + git index-pack --stdin --fix-thin +} + +test_expect_success 'setup' ' + test-genrandom base 4096 >base && + for i in one two + do + # we want shared content here to encourage deltas... + cp base file && + echo $i >>file && + + # ...whereas dummy should be short, because we do not want + # deltas that would create duplicates when we --fix-thin + echo $i >dummy && + + git add file dummy && + test_tick && + git commit -m $i || + return 1 + done && + + make_pack HEAD^ HEAD && + make_pack HEAD HEAD^ +' + +test_expect_success 'repack' ' + # We first want to check that we do not have any internal errors, + # and also that we do not hit the last-ditch cycle-breaking code + # in write_object(), which will issue a warning to stderr. + >expect && + git repack -ad 2>stderr && + test_cmp expect stderr && + + # And then double-check that the resulting pack is usable (i.e., + # we did not fail to notice any cycles). We know we are accessing + # the objects via the new pack here, because "repack -d" will have + # removed the others. + git cat-file blob HEAD:file >/dev/null && + git cat-file blob HEAD^:file >/dev/null +' + +test_done diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 82d913a6a8..505e1b4a7f 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -652,4 +652,72 @@ test_expect_success MINGW 'fetch-pack --diag-url c:repo' ' check_prot_path c:repo file c:repo ' +test_expect_success 'clone shallow since ...' ' + test_create_repo shallow-since && + ( + cd shallow-since && + GIT_COMMITTER_DATE="100000000 +0700" git commit --allow-empty -m one && + GIT_COMMITTER_DATE="200000000 +0700" git commit --allow-empty -m two && + GIT_COMMITTER_DATE="300000000 +0700" git commit --allow-empty -m three && + git clone --shallow-since "300000000 +0700" "file://$(pwd)/." ../shallow11 && + git -C ../shallow11 log --pretty=tformat:%s HEAD >actual && + echo three >expected && + test_cmp expected actual + ) +' + +test_expect_success 'fetch shallow since ...' ' + git -C shallow11 fetch --shallow-since "200000000 +0700" origin && + git -C shallow11 log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + three + two + EOF + test_cmp expected actual +' + +test_expect_success 'shallow clone exclude tag two' ' + test_create_repo shallow-exclude && + ( + cd shallow-exclude && + test_commit one && + test_commit two && + test_commit three && + git clone --shallow-exclude two "file://$(pwd)/." ../shallow12 && + git -C ../shallow12 log --pretty=tformat:%s HEAD >actual && + echo three >expected && + test_cmp expected actual + ) +' + +test_expect_success 'fetch exclude tag one' ' + git -C shallow12 fetch --shallow-exclude one origin && + git -C shallow12 log --pretty=tformat:%s origin/master >actual && + test_write_lines three two >expected && + test_cmp expected actual +' + +test_expect_success 'fetching deepen' ' + test_create_repo shallow-deepen && + ( + cd shallow-deepen && + test_commit one && + test_commit two && + test_commit three && + git clone --depth 1 "file://$(pwd)/." deepen && + test_commit four && + git -C deepen log --pretty=tformat:%s master >actual && + echo three >expected && + test_cmp expected actual && + git -C deepen fetch --deepen=1 && + git -C deepen log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + four + three + two + EOF + test_cmp expected actual + ) +' + test_done diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 819b9ddd0f..55fc83fc06 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -99,7 +99,7 @@ test_expect_success 'confuses pattern as remote when no remote specified' ' # We could just as easily have used "master"; the "*" emphasizes its # role as a pattern. test_must_fail git ls-remote refs*master >actual 2>&1 && - test_cmp exp actual + test_i18ncmp exp actual ' test_expect_success 'die with non-2 for wrong repository even with --exit-code' ' @@ -207,5 +207,45 @@ test_expect_success 'ls-remote --symref omits filtered-out matches' ' test_cmp expect actual ' +test_lazy_prereq GIT_DAEMON ' + test_tristate GIT_TEST_GIT_DAEMON && + test "$GIT_TEST_GIT_DAEMON" != false +' + +# This test spawns a daemon, so run it only if the user would be OK with +# testing with git-daemon. +test_expect_success PIPE,JGIT,GIT_DAEMON 'indicate no refs in standards-compliant empty remote' ' + JGIT_DAEMON_PORT=${JGIT_DAEMON_PORT-${this_test#t}} && + JGIT_DAEMON_PID= && + git init --bare empty.git && + >empty.git/git-daemon-export-ok && + mkfifo jgit_daemon_output && + { + jgit daemon --port="$JGIT_DAEMON_PORT" . >jgit_daemon_output & + JGIT_DAEMON_PID=$! + } && + test_when_finished kill "$JGIT_DAEMON_PID" && + { + read line && + case $line in + Exporting*) + ;; + *) + echo "Expected: Exporting" && + false;; + esac && + read line && + case $line in + "Listening on"*) + ;; + *) + echo "Expected: Listening on" && + false;; + esac + } <jgit_daemon_output && + # --exit-code asks the command to exit with 2 when no + # matching refs are found. + test_expect_code 2 git ls-remote --exit-code git://localhost:$JGIT_DAEMON_PORT/empty.git +' test_done diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index 551844584f..17f4d0fe4e 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -255,6 +255,23 @@ test_expect_success '--rebase' ' test new = "$(git show HEAD:file2)" ' +test_expect_success '--rebase fast forward' ' + git reset --hard before-rebase && + git checkout -b ff && + echo another modification >file && + git commit -m third file && + + git checkout to-rebase && + git pull --rebase . ff && + test "$(git rev-parse HEAD)" = "$(git rev-parse ff)" && + + # The above only validates the result. Did we actually bypass rebase? + git reflog -1 >reflog.actual && + sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy && + echo "OBJID HEAD@{0}: pull --rebase . ff: Fast-forward" >reflog.expected && + test_cmp reflog.expected reflog.fuzzy +' + test_expect_success '--rebase with conflicts shows advice' ' test_when_finished "git rebase --abort; git checkout -f to-rebase" && git checkout -b seq && diff --git a/t/t5528-push-default.sh b/t/t5528-push-default.sh index 73f4bb6346..44309566f1 100755 --- a/t/t5528-push-default.sh +++ b/t/t5528-push-default.sh @@ -98,6 +98,16 @@ test_expect_success 'push from/to new branch with upstream, matching and simple' test_push_failure upstream ' +test_expect_success 'push ambiguously named branch with upstream, matching and simple' ' + git checkout -b ambiguous && + test_config branch.ambiguous.remote parent1 && + test_config branch.ambiguous.merge refs/heads/ambiguous && + git tag ambiguous && + test_push_success simple ambiguous && + test_push_success matching ambiguous && + test_push_success upstream ambiguous +' + test_expect_success 'push from/to new branch with current creates remote branch' ' test_config branch.new-branch.remote repo1 && git checkout new-branch && diff --git a/t/t5531-deep-submodule-push.sh b/t/t5531-deep-submodule-push.sh index 198ce84754..1524ff5ba6 100755 --- a/t/t5531-deep-submodule-push.sh +++ b/t/t5531-deep-submodule-push.sh @@ -427,7 +427,31 @@ test_expect_success 'push unpushable submodule recursively fails' ' cd submodule.git && git rev-parse master >../actual ) && + test_when_finished git -C work reset --hard master^ && test_cmp expected actual ' +test_expect_success 'push --dry-run does not recursively update submodules' ' + ( + cd work/gar/bage && + git checkout master && + git rev-parse master >../../../expected_submodule && + > junk9 && + git add junk9 && + git commit -m "Ninth junk" && + + # Go up to 'work' directory + cd ../.. && + git checkout master && + git rev-parse master >../expected_pub && + git add gar/bage && + git commit -m "Ninth commit for gar/bage" && + git push --dry-run --recurse-submodules=on-demand ../pub.git master + ) && + git -C submodule.git rev-parse master >actual_submodule && + git -C pub.git rev-parse master >actual_pub && + test_cmp expected_pub actual_pub && + test_cmp expected_submodule actual_submodule +' + test_done diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh index 37a433504e..5fbf67c446 100755 --- a/t/t5539-fetch-http-shallow.sh +++ b/t/t5539-fetch-http-shallow.sh @@ -73,5 +73,78 @@ test_expect_success 'no shallow lines after receiving ACK ready' ' ) ' +test_expect_success 'clone shallow since ...' ' + test_create_repo shallow-since && + ( + cd shallow-since && + GIT_COMMITTER_DATE="100000000 +0700" git commit --allow-empty -m one && + GIT_COMMITTER_DATE="200000000 +0700" git commit --allow-empty -m two && + GIT_COMMITTER_DATE="300000000 +0700" git commit --allow-empty -m three && + mv .git "$HTTPD_DOCUMENT_ROOT_PATH/shallow-since.git" && + git clone --shallow-since "300000000 +0700" $HTTPD_URL/smart/shallow-since.git ../shallow11 && + git -C ../shallow11 log --pretty=tformat:%s HEAD >actual && + echo three >expected && + test_cmp expected actual + ) +' + +test_expect_success 'fetch shallow since ...' ' + git -C shallow11 fetch --shallow-since "200000000 +0700" origin && + git -C shallow11 log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + three + two + EOF + test_cmp expected actual +' + +test_expect_success 'shallow clone exclude tag two' ' + test_create_repo shallow-exclude && + ( + cd shallow-exclude && + test_commit one && + test_commit two && + test_commit three && + mv .git "$HTTPD_DOCUMENT_ROOT_PATH/shallow-exclude.git" && + git clone --shallow-exclude two $HTTPD_URL/smart/shallow-exclude.git ../shallow12 && + git -C ../shallow12 log --pretty=tformat:%s HEAD >actual && + echo three >expected && + test_cmp expected actual + ) +' + +test_expect_success 'fetch exclude tag one' ' + git -C shallow12 fetch --shallow-exclude one origin && + git -C shallow12 log --pretty=tformat:%s origin/master >actual && + test_write_lines three two >expected && + test_cmp expected actual +' + +test_expect_success 'fetching deepen' ' + test_create_repo shallow-deepen && + ( + cd shallow-deepen && + test_commit one && + test_commit two && + test_commit three && + mv .git "$HTTPD_DOCUMENT_ROOT_PATH/shallow-deepen.git" && + git clone --depth 1 $HTTPD_URL/smart/shallow-deepen.git deepen && + mv "$HTTPD_DOCUMENT_ROOT_PATH/shallow-deepen.git" .git && + test_commit four && + git -C deepen log --pretty=tformat:%s master >actual && + echo three >expected && + test_cmp expected actual && + mv .git "$HTTPD_DOCUMENT_ROOT_PATH/shallow-deepen.git" && + git -C deepen fetch --deepen=1 && + git -C deepen log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + four + three + two + EOF + test_cmp expected actual + ) +' + stop_httpd test_done diff --git a/t/t5547-push-quarantine.sh b/t/t5547-push-quarantine.sh new file mode 100755 index 0000000000..af9fcd833a --- /dev/null +++ b/t/t5547-push-quarantine.sh @@ -0,0 +1,61 @@ +#!/bin/sh + +test_description='check quarantine of objects during push' +. ./test-lib.sh + +test_expect_success 'create picky dest repo' ' + git init --bare dest.git && + write_script dest.git/hooks/pre-receive <<-\EOF + while read old new ref; do + test "$(git log -1 --format=%s $new)" = reject && exit 1 + done + exit 0 + EOF +' + +test_expect_success 'accepted objects work' ' + test_commit ok && + git push dest.git HEAD && + commit=$(git rev-parse HEAD) && + git --git-dir=dest.git cat-file commit $commit +' + +test_expect_success 'rejected objects are not installed' ' + test_commit reject && + commit=$(git rev-parse HEAD) && + test_must_fail git push dest.git reject && + test_must_fail git --git-dir=dest.git cat-file commit $commit +' + +test_expect_success 'rejected objects are removed' ' + echo "incoming-*" >expect && + (cd dest.git/objects && echo incoming-*) >actual && + test_cmp expect actual +' + +test_expect_success 'push to repo path with path separator (colon)' ' + # The interesting failure case here is when the + # receiving end cannot access its original object directory, + # so make it likely for us to generate a delta by having + # a non-trivial file with multiple versions. + + test-genrandom foo 4096 >file.bin && + git add file.bin && + git commit -m bin && + + if test_have_prereq MINGW + then + pathsep=";" + else + pathsep=":" + fi && + git clone --bare . "xxx${pathsep}yyy.git" && + + echo change >>file.bin && + git commit -am change && + # Note that we have to use the full path here, or it gets confused + # with the ssh host:path syntax. + git push "$(pwd)/xxx${pathsep}yyy.git" HEAD +' + +test_done diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index dc9b87d6b4..264a1ab8b0 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -299,5 +299,74 @@ test_expect_success 'git client does not send an empty Accept-Language' ' ! grep "^=> Send header: Accept-Language:" stderr ' +test_expect_success 'remote-http complains cleanly about malformed urls' ' + # do not actually issue "list" or other commands, as we do not + # want to rely on what curl would actually do with such a broken + # URL. This is just about making sure we do not segfault during + # initialization. + test_must_fail git remote-http http::/example.com/repo.git +' + +test_expect_success 'redirects can be forbidden/allowed' ' + test_must_fail git -c http.followRedirects=false \ + clone $HTTPD_URL/dumb-redir/repo.git dumb-redir && + git -c http.followRedirects=true \ + clone $HTTPD_URL/dumb-redir/repo.git dumb-redir 2>stderr +' + +test_expect_success 'redirects are reported to stderr' ' + # just look for a snippet of the redirected-to URL + test_i18ngrep /dumb/ stderr +' + +test_expect_success 'non-initial redirects can be forbidden' ' + test_must_fail git -c http.followRedirects=initial \ + clone $HTTPD_URL/redir-objects/repo.git redir-objects && + git -c http.followRedirects=true \ + clone $HTTPD_URL/redir-objects/repo.git redir-objects +' + +test_expect_success 'http.followRedirects defaults to "initial"' ' + test_must_fail git clone $HTTPD_URL/redir-objects/repo.git default +' + +# The goal is for a clone of the "evil" repository, which has no objects +# itself, to cause the client to fetch objects from the "victim" repository. +test_expect_success 'set up evil alternates scheme' ' + victim=$HTTPD_DOCUMENT_ROOT_PATH/victim.git && + git init --bare "$victim" && + git -C "$victim" --work-tree=. commit --allow-empty -m secret && + git -C "$victim" repack -ad && + git -C "$victim" update-server-info && + sha1=$(git -C "$victim" rev-parse HEAD) && + + evil=$HTTPD_DOCUMENT_ROOT_PATH/evil.git && + git init --bare "$evil" && + # do this by hand to avoid object existence check + printf "%s\\t%s\\n" $sha1 refs/heads/master >"$evil/info/refs" +' + +# Here we'll just redirect via HTTP. In a real-world attack these would be on +# different servers, but we should reject it either way. +test_expect_success 'http-alternates is a non-initial redirect' ' + echo "$HTTPD_URL/dumb/victim.git/objects" \ + >"$evil/objects/info/http-alternates" && + test_must_fail git -c http.followRedirects=initial \ + clone $HTTPD_URL/dumb/evil.git evil-initial && + git -c http.followRedirects=true \ + clone $HTTPD_URL/dumb/evil.git evil-initial +' + +# Curl supports a lot of protocols that we'd prefer not to allow +# http-alternates to use, but it's hard to test whether curl has +# accessed, say, the SMTP protocol, because we are not running an SMTP server. +# But we can check that it does not allow access to file://, which would +# otherwise allow this clone to complete. +test_expect_success 'http-alternates cannot point at funny protocols' ' + echo "file://$victim/objects" >"$evil/objects/info/http-alternates" && + test_must_fail git -c http.followRedirects=true \ + clone "$HTTPD_URL/dumb/evil.git" evil-file +' + stop_httpd test_done diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index 1ec5b2747a..a51b7e20d3 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -119,6 +119,10 @@ test_expect_success 'redirects re-root further requests' ' git clone $HTTPD_URL/smart-redir-limited/repo.git repo-redir-limited ' +test_expect_success 're-rooting dies on insane schemes' ' + test_must_fail git clone $HTTPD_URL/insane-redir/repo.git insane +' + test_expect_success 'clone from password-protected repository' ' echo two >expect && set_askpass user@host pass@host && @@ -276,6 +280,58 @@ test_expect_success 'large fetch-pack requests can be split across POSTs' ' test_line_count = 2 posts ' +test_expect_success 'test allowreachablesha1inwant' ' + test_when_finished "rm -rf test_reachable.git" && + server="$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + master_sha=$(git -C "$server" rev-parse refs/heads/master) && + git -C "$server" config uploadpack.allowreachablesha1inwant 1 && + + git init --bare test_reachable.git && + git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && + git -C test_reachable.git fetch origin "$master_sha" +' + +test_expect_success 'test allowreachablesha1inwant with unreachable' ' + test_when_finished "rm -rf test_reachable.git; git reset --hard $(git rev-parse HEAD)" && + + #create unreachable sha + echo content >file2 && + git add file2 && + git commit -m two && + git push public HEAD:refs/heads/doomed && + git push public :refs/heads/doomed && + + server="$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + master_sha=$(git -C "$server" rev-parse refs/heads/master) && + git -C "$server" config uploadpack.allowreachablesha1inwant 1 && + + git init --bare test_reachable.git && + git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && + test_must_fail git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" +' + +test_expect_success 'test allowanysha1inwant with unreachable' ' + test_when_finished "rm -rf test_reachable.git; git reset --hard $(git rev-parse HEAD)" && + + #create unreachable sha + echo content >file2 && + git add file2 && + git commit -m two && + git push public HEAD:refs/heads/doomed && + git push public :refs/heads/doomed && + + server="$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + master_sha=$(git -C "$server" rev-parse refs/heads/master) && + git -C "$server" config uploadpack.allowreachablesha1inwant 1 && + + git init --bare test_reachable.git && + git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && + test_must_fail git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" && + + git -C "$server" config uploadpack.allowanysha1inwant 1 && + git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" +' + test_expect_success EXPENSIVE 'http can handle enormous ref negotiation' ' ( cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && diff --git a/t/t5613-info-alternate.sh b/t/t5613-info-alternate.sh index 9cd2626dba..895f46bb91 100755 --- a/t/t5613-info-alternate.sh +++ b/t/t5613-info-alternate.sh @@ -6,107 +6,134 @@ test_description='test transitive info/alternate entries' . ./test-lib.sh -# test that a file is not reachable in the current repository -# but that it is after creating a info/alternate entry -reachable_via() { - alternate="$1" - file="$2" - if git cat-file -e "HEAD:$file"; then return 1; fi - echo "$alternate" >> .git/objects/info/alternate - git cat-file -e "HEAD:$file" -} - -test_valid_repo() { - git fsck --full > fsck.log && - test_line_count = 0 fsck.log -} - -base_dir=$(pwd) - -test_expect_success 'preparing first repository' \ -'test_create_repo A && cd A && -echo "Hello World" > file1 && -git add file1 && -git commit -m "Initial commit" file1 && -git repack -a -d && -git prune' - -cd "$base_dir" - -test_expect_success 'preparing second repository' \ -'git clone -l -s A B && cd B && -echo "foo bar" > file2 && -git add file2 && -git commit -m "next commit" file2 && -git repack -a -d -l && -git prune' - -cd "$base_dir" - -test_expect_success 'preparing third repository' \ -'git clone -l -s B C && cd C && -echo "Goodbye, cruel world" > file3 && -git add file3 && -git commit -m "one more" file3 && -git repack -a -d -l && -git prune' - -cd "$base_dir" - -test_expect_success 'creating too deep nesting' \ -'git clone -l -s C D && -git clone -l -s D E && -git clone -l -s E F && -git clone -l -s F G && -git clone --bare -l -s G H' - -test_expect_success 'invalidity of deepest repository' \ -'cd H && { - test_valid_repo - test $? -ne 0 -}' - -cd "$base_dir" +test_expect_success 'preparing first repository' ' + test_create_repo A && ( + cd A && + echo "Hello World" > file1 && + git add file1 && + git commit -m "Initial commit" file1 && + git repack -a -d && + git prune + ) +' -test_expect_success 'validity of third repository' \ -'cd C && -test_valid_repo' +test_expect_success 'preparing second repository' ' + git clone -l -s A B && ( + cd B && + echo "foo bar" > file2 && + git add file2 && + git commit -m "next commit" file2 && + git repack -a -d -l && + git prune + ) +' -cd "$base_dir" +test_expect_success 'preparing third repository' ' + git clone -l -s B C && ( + cd C && + echo "Goodbye, cruel world" > file3 && + git add file3 && + git commit -m "one more" file3 && + git repack -a -d -l && + git prune + ) +' -test_expect_success 'validity of fourth repository' \ -'cd D && -test_valid_repo' +test_expect_success 'count-objects shows the alternates' ' + cat >expect <<-EOF && + alternate: $(pwd)/B/.git/objects + alternate: $(pwd)/A/.git/objects + EOF + git -C C count-objects -v >actual && + grep ^alternate: actual >actual.alternates && + test_cmp expect actual.alternates +' -cd "$base_dir" +# Note: These tests depend on the hard-coded value of 5 as the maximum depth +# we will follow recursion. We start the depth at 0 and count links, not +# repositories. This means that in a chain like: +# +# A --> B --> C --> D --> E --> F --> G --> H +# 0 1 2 3 4 5 6 +# +# we are OK at "G", but break at "H", even though "H" is actually the 8th +# repository, not the 6th, which you might expect. Counting the links allows +# N+1 repositories, and counting from 0 to 5 inclusive allows 6 links. +# +# Note also that we must use "--bare -l" to make the link to H. The "-l" +# ensures we do not do a connectivity check, and the "--bare" makes sure +# we do not try to checkout the result (which needs objects), either of +# which would cause the clone to fail. +test_expect_success 'creating too deep nesting' ' + git clone -l -s C D && + git clone -l -s D E && + git clone -l -s E F && + git clone -l -s F G && + git clone --bare -l -s G H +' -test_expect_success 'breaking of loops' \ -'echo "$base_dir"/B/.git/objects >> "$base_dir"/A/.git/objects/info/alternates&& -cd C && -test_valid_repo' +test_expect_success 'validity of seventh repository' ' + git -C G fsck +' -cd "$base_dir" +test_expect_success 'invalidity of eighth repository' ' + test_must_fail git -C H fsck +' -test_expect_success 'that info/alternates is necessary' \ -'cd C && -rm -f .git/objects/info/alternates && -! (test_valid_repo)' +test_expect_success 'breaking of loops' ' + echo "$(pwd)"/B/.git/objects >>A/.git/objects/info/alternates && + git -C C fsck +' -cd "$base_dir" +test_expect_success 'that info/alternates is necessary' ' + rm -f C/.git/objects/info/alternates && + test_must_fail git -C C fsck +' -test_expect_success 'that relative alternate is possible for current dir' \ -'cd C && -echo "../../../B/.git/objects" > .git/objects/info/alternates && -test_valid_repo' +test_expect_success 'that relative alternate is possible for current dir' ' + echo "../../../B/.git/objects" >C/.git/objects/info/alternates && + git fsck +' -cd "$base_dir" +test_expect_success 'that relative alternate is recursive' ' + git -C D fsck +' -test_expect_success \ - 'that relative alternate is only possible for current dir' ' - cd D && - ! (test_valid_repo) +# we can reach "A" from our new repo both directly, and via "C". +# The deep/subdir is there to make sure we are not doing a stupid +# pure-text comparison of the alternate names. +test_expect_success 'relative duplicates are eliminated' ' + mkdir -p deep/subdir && + git init --bare deep/subdir/duplicate.git && + cat >deep/subdir/duplicate.git/objects/info/alternates <<-\EOF && + ../../../../C/.git/objects + ../../../../A/.git/objects + EOF + cat >expect <<-EOF && + alternate: $(pwd)/C/.git/objects + alternate: $(pwd)/B/.git/objects + alternate: $(pwd)/A/.git/objects + EOF + git -C deep/subdir/duplicate.git count-objects -v >actual && + grep ^alternate: actual >actual.alternates && + test_cmp expect actual.alternates ' -cd "$base_dir" +test_expect_success CASE_INSENSITIVE_FS 'dup finding can be case-insensitive' ' + git init --bare insensitive.git && + # the previous entry for "A" will have used uppercase + cat >insensitive.git/objects/info/alternates <<-\EOF && + ../../C/.git/objects + ../../a/.git/objects + EOF + cat >expect <<-EOF && + alternate: $(pwd)/C/.git/objects + alternate: $(pwd)/B/.git/objects + alternate: $(pwd)/A/.git/objects + EOF + git -C insensitive.git count-objects -v >actual && + grep ^alternate: actual >actual.alternates && + test_cmp expect actual.alternates +' test_done diff --git a/t/t5615-alternate-env.sh b/t/t5615-alternate-env.sh new file mode 100755 index 0000000000..26ebb0375d --- /dev/null +++ b/t/t5615-alternate-env.sh @@ -0,0 +1,89 @@ +#!/bin/sh + +test_description='handling of alternates in environment variables' +. ./test-lib.sh + +check_obj () { + alt=$1; shift + while read obj expect + do + echo "$obj" >&3 && + echo "$obj $expect" >&4 + done 3>input 4>expect && + GIT_ALTERNATE_OBJECT_DIRECTORIES=$alt \ + git "$@" cat-file --batch-check='%(objectname) %(objecttype)' \ + <input >actual && + test_cmp expect actual +} + +test_expect_success 'create alternate repositories' ' + git init --bare one.git && + one=$(echo one | git -C one.git hash-object -w --stdin) && + git init --bare two.git && + two=$(echo two | git -C two.git hash-object -w --stdin) +' + +test_expect_success 'objects inaccessible without alternates' ' + check_obj "" <<-EOF + $one missing + $two missing + EOF +' + +test_expect_success 'access alternate via absolute path' ' + check_obj "$PWD/one.git/objects" <<-EOF + $one blob + $two missing + EOF +' + +test_expect_success 'access multiple alternates' ' + check_obj "$PWD/one.git/objects:$PWD/two.git/objects" <<-EOF + $one blob + $two blob + EOF +' + +# bare paths are relative from $GIT_DIR +test_expect_success 'access alternate via relative path (bare)' ' + git init --bare bare.git && + check_obj "../one.git/objects" -C bare.git <<-EOF + $one blob + EOF +' + +# non-bare paths are relative to top of worktree +test_expect_success 'access alternate via relative path (worktree)' ' + git init worktree && + check_obj "../one.git/objects" -C worktree <<-EOF + $one blob + EOF +' + +# path is computed after moving to top-level of worktree +test_expect_success 'access alternate via relative path (subdir)' ' + mkdir subdir && + check_obj "one.git/objects" -C subdir <<-EOF + $one blob + EOF +' + +# set variables outside test to avoid quote insanity; the \057 is '/', +# which doesn't need quoting, but just confirms that de-quoting +# is working. +quoted='"one.git\057objects"' +unquoted='two.git/objects' +test_expect_success 'mix of quoted and unquoted alternates' ' + check_obj "$quoted:$unquoted" <<-EOF + $one blob + $two blob +' + +test_expect_success !MINGW 'broken quoting falls back to interpreting raw' ' + mv one.git \"one.git && + check_obj \"one.git/objects <<-EOF + $one blob + EOF +' + +test_done diff --git a/t/t5812-proto-disable-http.sh b/t/t5812-proto-disable-http.sh index 0d105d5417..044cc152f8 100755 --- a/t/t5812-proto-disable-http.sh +++ b/t/t5812-proto-disable-http.sh @@ -18,6 +18,7 @@ test_proto "smart http" http "$HTTPD_URL/smart/repo.git" test_expect_success 'curl redirects respect whitelist' ' test_must_fail env GIT_ALLOW_PROTOCOL=http:https \ + GIT_SMART_HTTP=0 \ git clone "$HTTPD_URL/ftp-redir/repo.git" 2>stderr && { test_i18ngrep "ftp.*disabled" stderr || diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh index 3e752ce032..969e4e9e52 100755 --- a/t/t6000-rev-list-misc.sh +++ b/t/t6000-rev-list-misc.sh @@ -100,4 +100,18 @@ test_expect_success '--bisect and --first-parent can not be combined' ' test_must_fail git rev-list --bisect --first-parent HEAD ' +test_expect_success '--header shows a NUL after each commit' ' + # We know that there is no Q in the true payload; names and + # addresses of the authors and the committers do not have + # any, and object names or header names do not, either. + git rev-list --header --max-count=2 HEAD | + nul_to_q | + grep "^Q" >actual && + cat >expect <<-EOF && + Q$(git rev-parse HEAD~1) + Q + EOF + test_cmp expect actual +' + test_done diff --git a/t/t6010-merge-base.sh b/t/t6010-merge-base.sh index e0c5f44cac..31db7b5f91 100755 --- a/t/t6010-merge-base.sh +++ b/t/t6010-merge-base.sh @@ -260,6 +260,12 @@ test_expect_success 'using reflog to find the fork point' ' test_cmp expect3 actual ' +test_expect_success '--fork-point works with empty reflog' ' + git -c core.logallrefupdates=false branch no-reflog base && + git merge-base --fork-point no-reflog derived && + test_cmp expect3 actual +' + test_expect_success 'merge-base --octopus --all for complex tree' ' # Best common ancestor for JE, JAA and JDD is JC # JE diff --git a/t/t6026-merge-attr.sh b/t/t6026-merge-attr.sh index 7a6e33e673..8f9b48a493 100755 --- a/t/t6026-merge-attr.sh +++ b/t/t6026-merge-attr.sh @@ -183,16 +183,24 @@ test_expect_success 'up-to-date merge without common ancestor' ' test_expect_success 'custom merge does not lock index' ' git reset --hard anchor && - write_script sleep-one-second.sh <<-\EOF && - sleep 1 & + write_script sleep-an-hour.sh <<-\EOF && + sleep 3600 & echo $! >sleep.pid EOF - test_when_finished "kill \$(cat sleep.pid)" && test_write_lines >.gitattributes \ - "* merge=ours" "text merge=sleep-one-second" && + "* merge=ours" "text merge=sleep-an-hour" && test_config merge.ours.driver true && - test_config merge.sleep-one-second.driver ./sleep-one-second.sh && + test_config merge.sleep-an-hour.driver ./sleep-an-hour.sh && + + # We are testing that the custom merge driver does not block + # index.lock on Windows due to an inherited file handle. + # To ensure that the backgrounded process ran sufficiently + # long (and has been started in the first place), we do not + # ignore the result of the kill command. + # By packaging the command in test_when_finished, we get both + # the correctness check and the clean-up. + test_when_finished "kill \$(cat sleep.pid)" && git merge master ' diff --git a/t/t6101-rev-parse-parents.sh b/t/t6101-rev-parse-parents.sh index 1c6952d049..8c617981a3 100755 --- a/t/t6101-rev-parse-parents.sh +++ b/t/t6101-rev-parse-parents.sh @@ -83,12 +83,24 @@ test_expect_success 'final^1^@ = final^1^1 final^1^2' ' test_cmp expect actual ' +test_expect_success 'symbolic final^1^@ = final^1^1 final^1^2' ' + git rev-parse --symbolic final^1^1 final^1^2 >expect && + git rev-parse --symbolic final^1^@ >actual && + test_cmp expect actual +' + test_expect_success 'final^1^! = final^1 ^final^1^1 ^final^1^2' ' git rev-parse final^1 ^final^1^1 ^final^1^2 >expect && git rev-parse final^1^! >actual && test_cmp expect actual ' +test_expect_success 'symbolic final^1^! = final^1 ^final^1^1 ^final^1^2' ' + git rev-parse --symbolic final^1 ^final^1^1 ^final^1^2 >expect && + git rev-parse --symbolic final^1^! >actual && + test_cmp expect actual +' + test_expect_success 'large graft octopus' ' test_cmp_rev_output b31 "git rev-parse --verify b1^30" ' @@ -102,4 +114,104 @@ test_expect_success 'short SHA-1 works' ' test_cmp_rev_output start "git rev-parse ${start%?}" ' +# rev^- tests; we can use a simpler setup for these + +test_expect_success 'setup for rev^- tests' ' + test_commit one && + test_commit two && + test_commit three && + + # Merge in a branch for testing rev^- + git checkout -b branch && + git checkout HEAD^^ && + git merge -m merge --no-edit --no-ff branch && + git checkout -b merge +' + +# The merged branch has 2 commits + the merge +test_expect_success 'rev-list --count merge^- = merge^..merge' ' + git rev-list --count merge^..merge >expect && + echo 3 >actual && + test_cmp expect actual +' + +# All rev^- rev-parse tests + +test_expect_success 'rev-parse merge^- = merge^..merge' ' + git rev-parse merge^..merge >expect && + git rev-parse merge^- >actual && + test_cmp expect actual +' + +test_expect_success 'rev-parse merge^-1 = merge^..merge' ' + git rev-parse merge^1..merge >expect && + git rev-parse merge^-1 >actual && + test_cmp expect actual +' + +test_expect_success 'rev-parse merge^-2 = merge^2..merge' ' + git rev-parse merge^2..merge >expect && + git rev-parse merge^-2 >actual && + test_cmp expect actual +' + +test_expect_success 'symbolic merge^-1 = merge^1..merge' ' + git rev-parse --symbolic merge^1..merge >expect && + git rev-parse --symbolic merge^-1 >actual && + test_cmp expect actual +' + +test_expect_success 'rev-parse merge^-0 (invalid parent)' ' + test_must_fail git rev-parse merge^-0 +' + +test_expect_success 'rev-parse merge^-3 (invalid parent)' ' + test_must_fail git rev-parse merge^-3 +' + +test_expect_success 'rev-parse merge^-^ (garbage after ^-)' ' + test_must_fail git rev-parse merge^-^ +' + +test_expect_success 'rev-parse merge^-1x (garbage after ^-1)' ' + test_must_fail git rev-parse merge^-1x +' + +# All rev^- rev-list tests (should be mostly the same as rev-parse; the reason +# for the duplication is that rev-parse and rev-list use different parsers). + +test_expect_success 'rev-list merge^- = merge^..merge' ' + git rev-list merge^..merge >expect && + git rev-list merge^- >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list merge^-1 = merge^1..merge' ' + git rev-list merge^1..merge >expect && + git rev-list merge^-1 >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list merge^-2 = merge^2..merge' ' + git rev-list merge^2..merge >expect && + git rev-list merge^-2 >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list merge^-0 (invalid parent)' ' + test_must_fail git rev-list merge^-0 +' + +test_expect_success 'rev-list merge^-3 (invalid parent)' ' + test_must_fail git rev-list merge^-3 +' + +test_expect_success 'rev-list merge^-^ (garbage after ^-)' ' + test_must_fail git rev-list merge^-^ +' + +test_expect_success 'rev-list merge^-1x (garbage after ^-1)' ' + test_must_fail git rev-list merge^-1x +' + test_done diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 19a2823025..039509a9cb 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -553,4 +553,14 @@ test_expect_success 'Verify sort with multiple keys' ' refs/tags/bogo refs/tags/master > actual && test_cmp expected actual ' + +test_expect_success 'do not dereference NULL upon %(HEAD) on unborn branch' ' + test_when_finished "git checkout master" && + git for-each-ref --format="%(HEAD) %(refname:short)" refs/heads/ >actual && + sed -e "s/^\* / /" actual >expect && + git checkout --orphan HEAD && + git for-each-ref --format="%(HEAD) %(refname:short)" refs/heads/ >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7064-wtstatus-pv2.sh b/t/t7064-wtstatus-pv2.sh index 3012a4d7c0..e319fa2e84 100755 --- a/t/t7064-wtstatus-pv2.sh +++ b/t/t7064-wtstatus-pv2.sh @@ -246,8 +246,8 @@ test_expect_success 'verify --intent-to-add output' ' git add --intent-to-add intent1.add intent2.add && cat >expect <<-EOF && - 1 AM N... 000000 100644 100644 $_z40 $EMPTY_BLOB intent1.add - 1 AM N... 000000 100644 100644 $_z40 $EMPTY_BLOB intent2.add + 1 .A N... 000000 000000 100644 $_z40 $_z40 intent1.add + 1 .A N... 000000 000000 100644 $_z40 $_z40 intent2.add EOF git status --porcelain=v2 >actual && diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index d84897a67a..0d8d893090 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -155,6 +155,15 @@ test_expect_success 'amend --only ignores staged contents' ' git diff --exit-code ' +test_expect_success 'allow-empty --only ignores staged contents' ' + echo changed-again >file && + git add file && + git commit --allow-empty --only -m "empty" && + git cat-file blob HEAD:file >file.actual && + test_cmp file.expect file.actual && + git diff --exit-code +' + test_expect_success 'set up editor' ' cat >editor <<-\EOF && #!/bin/sh diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 6e839f5489..762135adea 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -2,6 +2,7 @@ test_description='signed commit tests' . ./test-lib.sh +GNUPGHOME_NOT_USED=$GNUPGHOME . "$TEST_DIRECTORY/lib-gpg.sh" test_expect_success GPG 'create signed commits' ' @@ -190,7 +191,7 @@ test_expect_success GPG 'show bad signature with custom format' ' test_cmp expect actual ' -test_expect_success GPG 'show unknown signature with custom format' ' +test_expect_success GPG 'show untrusted signature with custom format' ' cat >expect <<-\EOF && U 61092E85B7227189 @@ -200,6 +201,16 @@ test_expect_success GPG 'show unknown signature with custom format' ' test_cmp expect actual ' +test_expect_success GPG 'show unknown signature with custom format' ' + cat >expect <<-\EOF && + E + 61092E85B7227189 + + EOF + GNUPGHOME="$GNUPGHOME_NOT_USED" git log -1 --format="%G?%n%GK%n%GS" eighth-signed-alt >actual && + test_cmp expect actual +' + test_expect_success GPG 'show lack of signature with custom format' ' cat >expect <<-\EOF && N diff --git a/t/t7513-interpret-trailers.sh b/t/t7513-interpret-trailers.sh index aee785cffa..4dd1d7c520 100755 --- a/t/t7513-interpret-trailers.sh +++ b/t/t7513-interpret-trailers.sh @@ -126,6 +126,305 @@ test_expect_success 'with multiline title in the message' ' test_cmp expected actual ' +test_expect_success 'with non-trailer lines mixed with Signed-off-by' ' + cat >patch <<-\EOF && + + this is not a trailer + this is not a trailer + Signed-off-by: a <a@example.com> + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + this is not a trailer + Signed-off-by: a <a@example.com> + this is not a trailer + token: value + EOF + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with non-trailer lines mixed with cherry picked from' ' + cat >patch <<-\EOF && + + this is not a trailer + this is not a trailer + (cherry picked from commit x) + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + this is not a trailer + (cherry picked from commit x) + this is not a trailer + token: value + EOF + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with non-trailer lines mixed with a configured trailer' ' + cat >patch <<-\EOF && + + this is not a trailer + this is not a trailer + My-trailer: x + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + this is not a trailer + My-trailer: x + this is not a trailer + token: value + EOF + test_config trailer.my.key "My-trailer: " && + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with non-trailer lines mixed with a non-configured trailer' ' + cat >patch <<-\EOF && + + this is not a trailer + this is not a trailer + I-am-not-configured: x + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + this is not a trailer + I-am-not-configured: x + this is not a trailer + + token: value + EOF + test_config trailer.my.key "My-trailer: " && + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with all non-configured trailers' ' + cat >patch <<-\EOF && + + I-am-not-configured: x + I-am-also-not-configured: x + EOF + cat >expected <<-\EOF && + + I-am-not-configured: x + I-am-also-not-configured: x + token: value + EOF + test_config trailer.my.key "My-trailer: " && + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'with non-trailer lines only' ' + cat >patch <<-\EOF && + + this is not a trailer + EOF + cat >expected <<-\EOF && + + this is not a trailer + + token: value + EOF + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'line with leading whitespace is not trailer' ' + q_to_tab >patch <<-\EOF && + + Qtoken: value + EOF + q_to_tab >expected <<-\EOF && + + Qtoken: value + + token: value + EOF + git interpret-trailers --trailer "token: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as one trailer for 25% check' ' + q_to_tab >patch <<-\EOF && + + Signed-off-by: a <a@example.com> + name: value on + Qmultiple lines + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + EOF + q_to_tab >expected <<-\EOF && + + Signed-off-by: a <a@example.com> + name: value on + Qmultiple lines + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + this is not a trailer + name: value + EOF + git interpret-trailers --trailer "name: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as atomic for placement' ' + q_to_tab >patch <<-\EOF && + + another: trailer + name: value on + Qmultiple lines + another: trailer + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: value on + Qmultiple lines + name: value + another: trailer + EOF + test_config trailer.name.where after && + git interpret-trailers --trailer "name: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as atomic for replacement' ' + q_to_tab >patch <<-\EOF && + + another: trailer + name: value on + Qmultiple lines + another: trailer + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + another: trailer + name: value + EOF + test_config trailer.name.ifexists replace && + git interpret-trailers --trailer "name: value" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as atomic for difference check' ' + q_to_tab >patch <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + EOF + test_config trailer.name.ifexists addIfDifferent && + + q_to_tab >trailer <<-\EOF && + name: first line + Qsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual && + + q_to_tab >trailer <<-\EOF && + name: first line + QQQQQsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + name: first line + QQQQQsecond line + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual && + + q_to_tab >trailer <<-\EOF && + name: first line *DIFFERENT* + Qsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + name: first line *DIFFERENT* + Qsecond line + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual +' + +test_expect_success 'multiline field treated as atomic for neighbor check' ' + q_to_tab >patch <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + EOF + test_config trailer.name.where after && + test_config trailer.name.ifexists addIfDifferentNeighbor && + + q_to_tab >trailer <<-\EOF && + name: first line + Qsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + another: trailer + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual && + + q_to_tab >trailer <<-\EOF && + name: first line + QQQQQsecond line + EOF + q_to_tab >expected <<-\EOF && + + another: trailer + name: first line + Qsecond line + name: first line + QQQQQsecond line + another: trailer + EOF + git interpret-trailers --trailer "$(cat trailer)" patch >actual && + test_cmp expected actual +' + test_expect_success 'with config setup' ' git config trailer.ack.key "Acked-by: " && cat >expected <<-\EOF && diff --git a/t/t7517-per-repo-email.sh b/t/t7517-per-repo-email.sh index 337e6e30c3..2a22fa7588 100755 --- a/t/t7517-per-repo-email.sh +++ b/t/t7517-per-repo-email.sh @@ -36,4 +36,51 @@ test_expect_success 'succeeds cloning if global email is not set' ' git clone . clone ' +test_expect_success 'set up rebase scenarios' ' + # temporarily enable an actual ident for this setup + test_config user.email foo@example.com && + test_commit new && + git branch side-without-commit HEAD^ && + git checkout -b side-with-commit HEAD^ && + test_commit side +' + +test_expect_success 'fast-forward rebase does not care about ident' ' + git checkout -B tmp side-without-commit && + git rebase master +' + +test_expect_success 'non-fast-forward rebase refuses to write commits' ' + test_when_finished "git rebase --abort || true" && + git checkout -B tmp side-with-commit && + test_must_fail git rebase master +' + +test_expect_success 'fast-forward rebase does not care about ident (interactive)' ' + git checkout -B tmp side-without-commit && + git rebase -i master +' + +test_expect_success 'non-fast-forward rebase refuses to write commits (interactive)' ' + test_when_finished "git rebase --abort || true" && + git checkout -B tmp side-with-commit && + test_must_fail git rebase -i master +' + +test_expect_success 'noop interactive rebase does not care about ident' ' + git checkout -B tmp side-with-commit && + git rebase -i HEAD^ +' + +test_expect_success 'fast-forward rebase does not care about ident (preserve)' ' + git checkout -B tmp side-without-commit && + git rebase -p master +' + +test_expect_success 'non-fast-forward rebase refuses to write commits (preserve)' ' + test_when_finished "git rebase --abort || true" && + git checkout -B tmp side-with-commit && + test_must_fail git rebase -p master +' + test_done diff --git a/t/t7609-merge-co-error-msgs.sh b/t/t7609-merge-co-error-msgs.sh index f80bdb81e1..e90413204e 100755 --- a/t/t7609-merge-co-error-msgs.sh +++ b/t/t7609-merge-co-error-msgs.sh @@ -105,7 +105,7 @@ test_expect_success 'not uptodate file porcelain checkout error' ' ' cat >expect <<\EOF -error: Updating the following directories would lose untracked files in it: +error: Updating the following directories would lose untracked files in them: rep rep2 diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh index 7217f3968d..63d36fb28e 100755 --- a/t/t7610-mergetool.sh +++ b/t/t7610-mergetool.sh @@ -591,7 +591,8 @@ test_expect_success 'filenames seen by tools start with ./' ' test_lazy_prereq MKTEMP ' tempdir=$(mktemp -d -t foo.XXXXXX) && - test -d "$tempdir" + test -d "$tempdir" && + rmdir "$tempdir" ' test_expect_success MKTEMP 'temporary filenames are used with mergetool.writeToTemp' ' @@ -606,4 +607,64 @@ test_expect_success MKTEMP 'temporary filenames are used with mergetool.writeToT git reset --hard master >/dev/null 2>&1 ' +test_expect_success 'diff.orderFile configuration is honored' ' + test_config diff.orderFile order-file && + test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" && + test_config mergetool.myecho.trustExitCode true && + echo b >order-file && + echo a >>order-file && + git checkout -b order-file-start master && + echo start >a && + echo start >b && + git add a b && + git commit -m start && + git checkout -b order-file-side1 order-file-start && + echo side1 >a && + echo side1 >b && + git add a b && + git commit -m side1 && + git checkout -b order-file-side2 order-file-start && + echo side2 >a && + echo side2 >b && + git add a b && + git commit -m side2 && + test_must_fail git merge order-file-side1 && + cat >expect <<-\EOF && + Merging: + b + a + EOF + git mergetool --no-prompt --tool myecho >output && + git grep --no-index -h -A2 Merging: output >actual && + test_cmp expect actual && + git reset --hard >/dev/null +' +test_expect_success 'mergetool -Oorder-file is honored' ' + test_config diff.orderFile order-file && + test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" && + test_config mergetool.myecho.trustExitCode true && + test_must_fail git merge order-file-side1 && + cat >expect <<-\EOF && + Merging: + a + b + EOF + git mergetool -O/dev/null --no-prompt --tool myecho >output && + git grep --no-index -h -A2 Merging: output >actual && + test_cmp expect actual && + git reset --hard >/dev/null 2>&1 && + + git config --unset diff.orderFile && + test_must_fail git merge order-file-side1 && + cat >expect <<-\EOF && + Merging: + b + a + EOF + git mergetool -Oorder-file --no-prompt --tool myecho >output && + git grep --no-index -h -A2 Merging: output >actual && + test_cmp expect actual && + git reset --hard >/dev/null 2>&1 +' + test_done diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 70a2de461a..99d4123461 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -374,6 +374,7 @@ test_expect_success PERL 'setup change in subdirectory' ' echo master >sub/sub && git add sub/sub && git commit -m "added sub/sub" && + git tag v1 && echo test >>file && echo test >>sub/sub && git add file sub/sub && @@ -409,12 +410,49 @@ run_dir_diff_test 'difftool --dir-diff ignores --prompt' ' grep file output ' -run_dir_diff_test 'difftool --dir-diff from subdirectory' ' +run_dir_diff_test 'difftool --dir-diff branch from subdirectory' ' ( cd sub && git difftool --dir-diff $symlinks --extcmd ls branch >output && - grep sub output && - grep file output + # "sub" must only exist in "right" + # "file" and "file2" must be listed in both "left" and "right" + test "1" = $(grep sub output | wc -l) && + test "2" = $(grep file"$" output | wc -l) && + test "2" = $(grep file2 output | wc -l) + ) +' + +run_dir_diff_test 'difftool --dir-diff v1 from subdirectory' ' + ( + cd sub && + git difftool --dir-diff $symlinks --extcmd ls v1 >output && + # "sub" and "file" exist in both v1 and HEAD. + # "file2" is unchanged. + test "2" = $(grep sub output | wc -l) && + test "2" = $(grep file output | wc -l) && + test "0" = $(grep file2 output | wc -l) + ) +' + +run_dir_diff_test 'difftool --dir-diff branch from subdirectory w/ pathspec' ' + ( + cd sub && + git difftool --dir-diff $symlinks --extcmd ls branch -- .>output && + # "sub" only exists in "right" + # "file" and "file2" must not be listed + test "1" = $(grep sub output | wc -l) && + test "0" = $(grep file output | wc -l) + ) +' + +run_dir_diff_test 'difftool --dir-diff v1 from subdirectory w/ pathspec' ' + ( + cd sub && + git difftool --dir-diff $symlinks --extcmd ls v1 -- .>output && + # "sub" exists in v1 and HEAD + # "file" is filtered out by the pathspec + test "2" = $(grep sub output | wc -l) && + test "0" = $(grep file output | wc -l) ) ' diff --git a/t/t8003-blame-corner-cases.sh b/t/t8003-blame-corner-cases.sh index e48370dfa0..661f9d430d 100755 --- a/t/t8003-blame-corner-cases.sh +++ b/t/t8003-blame-corner-cases.sh @@ -212,12 +212,12 @@ EOF test_expect_success 'blame -L with invalid start' ' test_must_fail git blame -L5 tres 2>errors && - grep "has only 2 lines" errors + test_i18ngrep "has only 2 lines" errors ' test_expect_success 'blame -L with invalid end' ' test_must_fail git blame -L1,5 tres 2>errors && - grep "has only 2 lines" errors + test_i18ngrep "has only 2 lines" errors ' test_expect_success 'blame parses <end> part of -L' ' diff --git a/t/t8010-cat-file-filters.sh b/t/t8010-cat-file-filters.sh new file mode 100755 index 0000000000..d8242e467e --- /dev/null +++ b/t/t8010-cat-file-filters.sh @@ -0,0 +1,64 @@ +#!/bin/sh + +test_description='git cat-file filters support' +. ./test-lib.sh + +test_expect_success 'setup ' ' + echo "*.txt eol=crlf diff=txt" >.gitattributes && + echo "hello" | append_cr >world.txt && + git add .gitattributes world.txt && + test_tick && + git commit -m "Initial commit" +' + +has_cr () { + tr '\015' Q <"$1" | grep Q >/dev/null +} + +test_expect_success 'no filters with `git show`' ' + git show HEAD:world.txt >actual && + ! has_cr actual + +' + +test_expect_success 'no filters with cat-file' ' + git cat-file blob HEAD:world.txt >actual && + ! has_cr actual +' + +test_expect_success 'cat-file --filters converts to worktree version' ' + git cat-file --filters HEAD:world.txt >actual && + has_cr actual +' + +test_expect_success 'cat-file --filters --path=<path> works' ' + sha1=$(git rev-parse -q --verify HEAD:world.txt) && + git cat-file --filters --path=world.txt $sha1 >actual && + has_cr actual +' + +test_expect_success 'cat-file --textconv --path=<path> works' ' + sha1=$(git rev-parse -q --verify HEAD:world.txt) && + test_config diff.txt.textconv "tr A-Za-z N-ZA-Mn-za-m <" && + git cat-file --textconv --path=hello.txt $sha1 >rot13 && + test uryyb = "$(cat rot13 | remove_cr)" +' + +test_expect_success '--path=<path> complains without --textconv/--filters' ' + sha1=$(git rev-parse -q --verify HEAD:world.txt) && + test_must_fail git cat-file --path=hello.txt blob $sha1 >actual 2>err && + test ! -s actual && + grep "path.*needs.*filters" err +' + +test_expect_success 'cat-file --textconv --batch works' ' + sha1=$(git rev-parse -q --verify HEAD:world.txt) && + test_config diff.txt.textconv "tr A-Za-z N-ZA-Mn-za-m <" && + printf "%s hello.txt\n%s hello\n" $sha1 $sha1 | + git cat-file --textconv --batch >actual && + printf "%s blob 6\nuryyb\r\n\n%s blob 6\nhello\n\n" \ + $sha1 $sha1 >expect && + test_cmp expect actual +' + +test_done diff --git a/t/t9000/test.pl b/t/t9000/test.pl index 2d05d3eeab..dfeaa9c655 100755 --- a/t/t9000/test.pl +++ b/t/t9000/test.pl @@ -32,15 +32,15 @@ my @success_list = (q[Jane], q["Jane\" Doe" <jdoe@example.com>], q[Doe, jane <jdoe@example.com>], q["Jane Doe <jdoe@example.com>], - q['Jane 'Doe' <jdoe@example.com>]); + q['Jane 'Doe' <jdoe@example.com>], + q[Jane@:;\.,()<>Doe <jdoe@example.com>], + q[Jane <jdoe@example.com> Doe], + q[<jdoe@example.com> Jane Doe]); my @known_failure_list = (q[Jane\ Doe <jdoe@example.com>], q["Doe, Ja"ne <jdoe@example.com>], q["Doe, Katarina" Jane <jdoe@example.com>], - q[Jane@:;\.,()<>Doe <jdoe@example.com>], q[Jane jdoe@example.com], - q[<jdoe@example.com> Jane Doe], - q[Jane <jdoe@example.com> Doe], q["Jane "Kat"a" ri"na" ",Doe" <jdoe@example.com>], q[Jane Doe], q[Jane "Doe <jdoe@example.com>"], diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index b3355d2c70..3dc4a3454d 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -140,6 +140,35 @@ test_expect_success $PREREQ 'Verify commandline' ' test_cmp expected commandline1 ' +test_expect_success $PREREQ 'setup expect for cc trailer' " +cat >expected-cc <<\EOF +!recipient@example.com! +!author@example.com! +!one@example.com! +!two@example.com! +!three@example.com! +!four@example.com! +!five@example.com! +EOF +" + +test_expect_success $PREREQ 'cc trailer with various syntax' ' + test_commit cc-trailer && + test_when_finished "git reset --hard HEAD^" && + git commit --amend -F - <<-EOF && + Test Cc: trailers. + + Cc: one@example.com + Cc: <two@example.com> # this is part of the name + Cc: <three@example.com>, <four@example.com> # not.five@example.com + Cc: "Some # Body" <five@example.com> [part.of.name.too] + EOF + clean_fake_sendmail && + git send-email -1 --to=recipient@example.com \ + --smtp-server="$(pwd)/fake.sendmail" && + test_cmp expected-cc commandline1 +' + test_expect_success $PREREQ 'setup expect' " cat >expected-show-all-headers <<\EOF 0001-Second.patch diff --git a/t/t9100-git-svn-basic.sh b/t/t9100-git-svn-basic.sh index 92a3aa8063..8a8ba65a2a 100755 --- a/t/t9100-git-svn-basic.sh +++ b/t/t9100-git-svn-basic.sh @@ -17,25 +17,12 @@ case "$GIT_SVN_LC_ALL" in ;; esac -deepdir=nothing-above -ceiling=$PWD - test_expect_success 'git svn --version works anywhere' ' - mkdir -p "$deepdir" && ( - GIT_CEILING_DIRECTORIES="$ceiling" && - export GIT_CEILING_DIRECTORIES && - cd "$deepdir" && - git svn --version - ) + nongit git svn --version ' test_expect_success 'git svn help works anywhere' ' - mkdir -p "$deepdir" && ( - GIT_CEILING_DIRECTORIES="$ceiling" && - export GIT_CEILING_DIRECTORIES && - cd "$deepdir" && - git svn help - ) + nongit git svn help ' test_expect_success \ diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index e94b2f147a..6d06ed96cb 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -709,6 +709,14 @@ test_expect_success HIGHLIGHT \ git commit -m "Add test.sh" && gitweb_run "p=.git;a=blob;f=test.sh"' +test_expect_success HIGHLIGHT \ + 'syntax highlighting (highlighter language autodetection)' \ + 'git config gitweb.highlight yes && + echo "#!/usr/bin/perl" > test && + git add test && + git commit -m "Add test" && + gitweb_run "p=.git;a=blob;f=test"' + # ---------------------------------------------------------------------- # forks of projects diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 0730f18d0f..4d935222e9 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -131,6 +131,26 @@ test_expect_success 'clone two dirs, @all, conflicting files' ' ) ' +test_expect_success 'clone two dirs, each edited by submit, single git commit' ' + ( + cd "$cli" && + echo sub1/f4 >sub1/f4 && + p4 add sub1/f4 && + echo sub2/f4 >sub2/f4 && + p4 add sub2/f4 && + p4 submit -d "sub1/f4 and sub2/f4" + ) && + git p4 clone --dest="$git" //depot/sub1@all //depot/sub2@all && + test_when_finished cleanup_git && + ( + cd "$git" && + git ls-files >lines && + test_line_count = 4 lines && + git log --oneline p4/master >lines && + test_line_count = 5 lines + ) +' + revision_ranges="2000/01/01,#head \ 1,2080/01/01 \ 2000/01/01,2080/01/01 \ @@ -147,7 +167,7 @@ test_expect_success 'clone using non-numeric revision ranges' ' ( cd "$git" && git ls-files >lines && - test_line_count = 6 lines + test_line_count = 8 lines ) done ' diff --git a/t/t9824-git-p4-git-lfs.sh b/t/t9824-git-p4-git-lfs.sh index 110a7e7924..734b8db4cb 100755 --- a/t/t9824-git-p4-git-lfs.sh +++ b/t/t9824-git-p4-git-lfs.sh @@ -42,6 +42,8 @@ test_expect_success 'Create repo with binary files' ' ( cd "$cli" && + >file0.dat && + p4 add file0.dat && echo "content 1 txt 23 bytes" >file1.txt && p4 add file1.txt && echo "content 2-3 bin 25 bytes" >file2.dat && diff --git a/t/t9830-git-p4-symlink-dir.sh b/t/t9830-git-p4-symlink-dir.sh new file mode 100755 index 0000000000..3dc528bb1e --- /dev/null +++ b/t/t9830-git-p4-symlink-dir.sh @@ -0,0 +1,43 @@ +#!/bin/sh + +test_description='git p4 symlinked directories' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'symlinked directory' ' + ( + cd "$cli" && + : >first_file.t && + p4 add first_file.t && + p4 submit -d "first change" + ) && + git p4 clone --dest "$git" //depot && + ( + cd "$git" && + mkdir -p some/sub/directory && + mkdir -p other/subdir2 && + : > other/subdir2/file.t && + (cd some/sub/directory && ln -s ../../../other/subdir2 .) && + git add some other && + git commit -m "symlinks" && + git config git-p4.skipSubmitEdit true && + git p4 submit -v + ) && + ( + cd "$cli" && + p4 sync && + test -L some/sub/directory/subdir2 + test_path_is_file some/sub/directory/subdir2/file.t + ) + +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 2ba62fbc17..a34e55f874 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -257,12 +257,7 @@ test_expect_success SYMLINKS '__gitdir - resulting path avoids symlinks' ' ' test_expect_success '__gitdir - not a git repository' ' - ( - cd subdir/subsubdir && - GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY" && - export GIT_CEILING_DIRECTORIES && - test_must_fail __gitdir - ) + nongit test_must_fail __gitdir ' test_expect_success '__gitcomp - trailing space - options' ' diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index fdaeb3a96b..adab7f51f4 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -994,3 +994,17 @@ test_copy_bytes () { } ' - "$1" } + +# run "$@" inside a non-git directory +nongit () { + test -d non-repo || + mkdir non-repo || + return 1 + + ( + GIT_CEILING_DIRECTORIES=$(pwd) && + export GIT_CEILING_DIRECTORIES && + cd non-repo && + "$@" + ) +} diff --git a/t/test-lib.sh b/t/test-lib.sh index ac56512a1c..cde7fc7fcf 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -54,12 +54,22 @@ case "$GIT_TEST_TEE_STARTED, $* " in done,*) # do not redirect again ;; -*' --tee '*|*' --va'*) +*' --tee '*|*' --va'*|*' --verbose-log '*) mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results" BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)" + + # Make this filename available to the sub-process in case it is using + # --verbose-log. + GIT_TEST_TEE_OUTPUT_FILE=$BASE.out + export GIT_TEST_TEE_OUTPUT_FILE + + # Truncate before calling "tee -a" to get rid of the results + # from any previous runs. + >"$GIT_TEST_TEE_OUTPUT_FILE" + (GIT_TEST_TEE_STARTED=done ${SHELL_PATH} "$0" "$@" 2>&1; - echo $? > $BASE.exit) | tee $BASE.out - test "$(cat $BASE.exit)" = 0 + echo $? >"$BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE" + test "$(cat "$BASE.exit")" = 0 exit ;; esac @@ -246,6 +256,9 @@ do trace=t verbose=t shift ;; + --verbose-log) + verbose_log=t + shift ;; *) echo "error: unknown test option '$1'" >&2; exit 1 ;; esac @@ -308,6 +321,16 @@ say () { say_color info "$*" } +if test -n "$HARNESS_ACTIVE" +then + if test "$verbose" = t || test -n "$verbose_only" + then + printf 'Bail out! %s\n' \ + 'verbose mode forbidden under TAP harness; try --verbose-log' + exit 1 + fi +fi + test "${test_description}" != "" || error "Test script did not set test_description." @@ -319,7 +342,10 @@ fi exec 5>&1 exec 6<&0 -if test "$verbose" = "t" +if test "$verbose_log" = "t" +then + exec 3>>"$GIT_TEST_TEE_OUTPUT_FILE" 4>&3 +elif test "$verbose" = "t" then exec 4>&2 3>&1 else @@ -783,7 +809,14 @@ then return; base=$(basename "$1") - symlink_target=$GIT_BUILD_DIR/$base + case "$base" in + test-*) + symlink_target="$GIT_BUILD_DIR/t/helper/$base" + ;; + *) + symlink_target="$GIT_BUILD_DIR/$base" + ;; + esac # do not override scripts if test -x "$symlink_target" && test ! -d "$symlink_target" && @@ -1073,6 +1106,10 @@ test_lazy_prereq NOT_ROOT ' test "$uid" != 0 ' +test_lazy_prereq JGIT ' + type jgit +' + # SANITY is about "can you correctly predict what the filesystem would # do by only looking at the permission bits of the files and # directories?" A typical example of !SANITY is running the test diff --git a/t/valgrind/valgrind.sh b/t/valgrind/valgrind.sh index 42153036dc..669ebaf68b 100755 --- a/t/valgrind/valgrind.sh +++ b/t/valgrind/valgrind.sh @@ -1,11 +1,19 @@ #!/bin/sh base=$(basename "$0") +case "$base" in +test-*) + program="$GIT_VALGRIND/../../t/helper/$base" + ;; +*) + program="$GIT_VALGRIND/../../$base" + ;; +esac TOOL_OPTIONS='--leak-check=no' test -z "$GIT_VALGRIND_ENABLED" && -exec "$GIT_VALGRIND"/../../"$base" "$@" +exec "$program" "$@" case "$GIT_VALGRIND_MODE" in memcheck-fast) @@ -29,4 +37,4 @@ exec valgrind -q --error-exitcode=126 \ --log-fd=4 \ --input-fd=4 \ $GIT_VALGRIND_OPTIONS \ - "$GIT_VALGRIND"/../../"$base" "$@" + "$program" "$@" |