diff options
Diffstat (limited to 't')
| -rw-r--r-- | t/Makefile | 43 | ||||
| -rw-r--r-- | t/perf/.gitignore | 2 | ||||
| -rw-r--r-- | t/perf/Makefile | 15 | ||||
| -rw-r--r-- | t/perf/README | 146 | ||||
| -rwxr-xr-x | t/perf/aggregate.perl | 166 | ||||
| -rwxr-xr-x | t/perf/min_time.perl | 21 | ||||
| -rwxr-xr-x | t/perf/p0000-perf-lib-sanity.sh | 41 | ||||
| -rwxr-xr-x | t/perf/p0001-rev-list.sh | 17 | ||||
| -rwxr-xr-x | t/perf/p7810-grep.sh | 23 | ||||
| -rw-r--r-- | t/perf/perf-lib.sh | 198 | ||||
| -rwxr-xr-x | t/perf/run | 82 | ||||
| -rwxr-xr-x | t/t1051-large-conversion.sh | 86 | ||||
| -rwxr-xr-x | t/t1300-repo-config.sh | 27 | ||||
| -rwxr-xr-x | t/t1305-config-include.sh | 134 | ||||
| -rwxr-xr-x | t/t1450-fsck.sh | 26 | ||||
| -rwxr-xr-x | t/t3700-add.sh | 15 | ||||
| -rwxr-xr-x | t/t4150-am.sh | 10 | ||||
| -rwxr-xr-x | t/t5504-fetch-receive-strict.sh | 22 | ||||
| -rwxr-xr-x | t/t5523-push-upstream.sh | 3 | ||||
| -rwxr-xr-x | t/t5541-http-push.sh | 2 | ||||
| -rwxr-xr-x | t/t7004-tag.sh | 39 | ||||
| -rwxr-xr-x | t/t9100-git-svn-basic.sh | 45 | ||||
| -rwxr-xr-x | t/t9500-gitweb-standalone-no-errors.sh | 48 | ||||
| -rwxr-xr-x | t/t9800-git-p4-basic.sh | 24 | ||||
| -rwxr-xr-x | t/t9809-git-p4-client-view.sh | 161 | ||||
| -rwxr-xr-x | t/t9810-git-p4-rcs.sh | 388 | ||||
| -rw-r--r-- | t/test-lib-functions.sh | 565 | ||||
| -rw-r--r-- | t/test-lib.sh | 574 |
28 files changed, 2325 insertions, 598 deletions
diff --git a/t/Makefile b/t/Makefile index b5048ab77b..6091211f10 100644 --- a/t/Makefile +++ b/t/Makefile @@ -73,4 +73,45 @@ gitweb-test: valgrind: $(MAKE) GIT_TEST_OPTS="$(GIT_TEST_OPTS) --valgrind" -.PHONY: pre-clean $(T) aggregate-results clean valgrind +perf: + $(MAKE) -C perf/ all + +# Smoke testing targets +-include ../GIT-VERSION-FILE +uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo unknown') +uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo unknown') + +test-results: + mkdir -p test-results + +test-results/git-smoke.tar.gz: test-results + $(PERL_PATH) ./harness \ + --archive="test-results/git-smoke.tar.gz" \ + $(T) + +smoke: test-results/git-smoke.tar.gz + +SMOKE_UPLOAD_FLAGS = +ifdef SMOKE_USERNAME + SMOKE_UPLOAD_FLAGS += -F username="$(SMOKE_USERNAME)" -F password="$(SMOKE_PASSWORD)" +endif +ifdef SMOKE_COMMENT + SMOKE_UPLOAD_FLAGS += -F comments="$(SMOKE_COMMENT)" +endif +ifdef SMOKE_TAGS + SMOKE_UPLOAD_FLAGS += -F tags="$(SMOKE_TAGS)" +endif + +smoke_report: smoke + curl \ + -H "Expect: " \ + -F project=Git \ + -F architecture="$(uname_M)" \ + -F platform="$(uname_S)" \ + -F revision="$(GIT_VERSION)" \ + -F report_file=@test-results/git-smoke.tar.gz \ + $(SMOKE_UPLOAD_FLAGS) \ + http://smoke.git.nix.is/app/projects/process_add_report/1 \ + | grep -v ^Redirecting + +.PHONY: pre-clean $(T) aggregate-results clean valgrind perf diff --git a/t/perf/.gitignore b/t/perf/.gitignore new file mode 100644 index 0000000000..50f5cc1ed9 --- /dev/null +++ b/t/perf/.gitignore @@ -0,0 +1,2 @@ +build/ +test-results/ diff --git a/t/perf/Makefile b/t/perf/Makefile new file mode 100644 index 0000000000..8c47155a7c --- /dev/null +++ b/t/perf/Makefile @@ -0,0 +1,15 @@ +-include ../../config.mak +export GIT_TEST_OPTIONS + +all: perf + +perf: pre-clean + ./run + +pre-clean: + rm -rf test-results + +clean: + rm -rf build "trash directory".* test-results + +.PHONY: all perf pre-clean clean diff --git a/t/perf/README b/t/perf/README new file mode 100644 index 0000000000..b2dbad4d50 --- /dev/null +++ b/t/perf/README @@ -0,0 +1,146 @@ +Git performance tests +===================== + +This directory holds performance testing scripts for git tools. The +first part of this document describes the various ways in which you +can run them. + +When fixing the tools or adding enhancements, you are strongly +encouraged to add tests in this directory to cover what you are +trying to fix or enhance. The later part of this short document +describes how your test scripts should be organized. + + +Running Tests +------------- + +The easiest way to run tests is to say "make". This runs all +the tests on the current git repository. + + === Running 2 tests in this tree === + [...] + Test this tree + --------------------------------------------------------- + 0001.1: rev-list --all 0.54(0.51+0.02) + 0001.2: rev-list --all --objects 6.14(5.99+0.11) + 7810.1: grep worktree, cheap regex 0.16(0.16+0.35) + 7810.2: grep worktree, expensive regex 7.90(29.75+0.37) + 7810.3: grep --cached, cheap regex 3.07(3.02+0.25) + 7810.4: grep --cached, expensive regex 9.39(30.57+0.24) + +You can compare multiple repositories and even git revisions with the +'run' script: + + $ ./run . origin/next /path/to/git-tree p0001-rev-list.sh + +where . stands for the current git tree. The full invocation is + + ./run [<revision|directory>...] [--] [<test-script>...] + +A '.' argument is implied if you do not pass any other +revisions/directories. + +You can also manually test this or another git build tree, and then +call the aggregation script to summarize the results: + + $ ./p0001-rev-list.sh + [...] + $ GIT_BUILD_DIR=/path/to/other/git ./p0001-rev-list.sh + [...] + $ ./aggregate.perl . /path/to/other/git ./p0001-rev-list.sh + +aggregate.perl has the same invocation as 'run', it just does not run +anything beforehand. + +You can set the following variables (also in your config.mak): + + GIT_PERF_REPEAT_COUNT + Number of times a test should be repeated for best-of-N + measurements. Defaults to 5. + + GIT_PERF_MAKE_OPTS + Options to use when automatically building a git tree for + performance testing. E.g., -j6 would be useful. + + GIT_PERF_REPO + GIT_PERF_LARGE_REPO + Repositories to copy for the performance tests. The normal + repo should be at least git.git size. The large repo should + probably be about linux-2.6.git size for optimal results. + Both default to the git.git you are running from. + +You can also pass the options taken by ordinary git tests; the most +useful one is: + +--root=<directory>:: + Create "trash" directories used to store all temporary data during + testing under <directory>, instead of the t/ directory. + Using this option with a RAM-based filesystem (such as tmpfs) + can massively speed up the test suite. + + +Naming Tests +------------ + +The performance test files are named as: + + pNNNN-commandname-details.sh + +where N is a decimal digit. The same conventions for choosing NNNN as +for normal tests apply. + + +Writing Tests +------------- + +The perf script starts much like a normal test script, except it +sources perf-lib.sh: + + #!/bin/sh + # + # Copyright (c) 2005 Junio C Hamano + # + + test_description='xxx performance test' + . ./perf-lib.sh + +After that you will want to use some of the following: + + test_perf_default_repo # sets up a "normal" repository + test_perf_large_repo # sets up a "large" repository + + test_perf_default_repo sub # ditto, in a subdir "sub" + + test_checkout_worktree # if you need the worktree too + +At least one of the first two is required! + +You can use test_expect_success as usual. For actual performance +tests, use + + test_perf 'descriptive string' ' + command1 && + command2 + ' + +test_perf spawns a subshell, for lack of better options. This means +that + +* you _must_ export all variables that you need in the subshell + +* you _must_ flag all variables that you want to persist from the + subshell with 'test_export': + + test_perf 'descriptive string' ' + foo=$(git rev-parse HEAD) && + test_export foo + ' + + The so-exported variables are automatically marked for export in the + shell executing the perf test. For your convenience, test_export is + the same as export in the main shell. + + This feature relies on a bit of magic using 'set' and 'source'. + While we have tried to make sure that it can cope with embedded + whitespace and other special characters, it will not work with + multi-line data. diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl new file mode 100755 index 0000000000..15f7fc1b80 --- /dev/null +++ b/t/perf/aggregate.perl @@ -0,0 +1,166 @@ +#!/usr/bin/perl + +use strict; +use warnings; +use Git; + +sub get_times { + my $name = shift; + open my $fh, "<", $name or return undef; + my $line = <$fh>; + return undef if not defined $line; + close $fh or die "cannot close $name: $!"; + $line =~ /^(?:(\d+):)?(\d+):(\d+(?:\.\d+)?) (\d+(?:\.\d+)?) (\d+(?:\.\d+)?)$/ + or die "bad input line: $line"; + my $rt = ((defined $1 ? $1 : 0.0)*60+$2)*60+$3; + return ($rt, $4, $5); +} + +sub format_times { + my ($r, $u, $s, $firstr) = @_; + if (!defined $r) { + return "<missing>"; + } + my $out = sprintf "%.2f(%.2f+%.2f)", $r, $u, $s; + if (defined $firstr) { + if ($firstr > 0) { + $out .= sprintf " %+.1f%%", 100.0*($r-$firstr)/$firstr; + } elsif ($r == 0) { + $out .= " ="; + } else { + $out .= " +inf"; + } + } + return $out; +} + +my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests); +while (scalar @ARGV) { + my $arg = $ARGV[0]; + my $dir; + last if -f $arg or $arg eq "--"; + if (! -d $arg) { + my $rev = Git::command_oneline(qw(rev-parse --verify), $arg); + $dir = "build/".$rev; + } else { + $arg =~ s{/*$}{}; + $dir = $arg; + $dirabbrevs{$dir} = $dir; + } + push @dirs, $dir; + $dirnames{$dir} = $arg; + my $prefix = $dir; + $prefix =~ tr/^a-zA-Z0-9/_/c; + $prefixes{$dir} = $prefix . '.'; + shift @ARGV; +} + +if (not @dirs) { + @dirs = ('.'); +} +$dirnames{'.'} = $dirabbrevs{'.'} = "this tree"; +$prefixes{'.'} = ''; + +shift @ARGV if scalar @ARGV and $ARGV[0] eq "--"; + +@tests = @ARGV; +if (not @tests) { + @tests = glob "p????-*.sh"; +} + +my @subtests; +my %shorttests; +for my $t (@tests) { + $t =~ s{(?:.*/)?(p(\d+)-[^/]+)\.sh$}{$1} or die "bad test name: $t"; + my $n = $2; + my $fname = "test-results/$t.subtests"; + open my $fp, "<", $fname or die "cannot open $fname: $!"; + for (<$fp>) { + chomp; + /^(\d+)$/ or die "malformed subtest line: $_"; + push @subtests, "$t.$1"; + $shorttests{"$t.$1"} = "$n.$1"; + } + close $fp or die "cannot close $fname: $!"; +} + +sub read_descr { + my $name = shift; + open my $fh, "<", $name or return "<error reading description>"; + my $line = <$fh>; + close $fh or die "cannot close $name"; + chomp $line; + return $line; +} + +my %descrs; +my $descrlen = 4; # "Test" +for my $t (@subtests) { + $descrs{$t} = $shorttests{$t}.": ".read_descr("test-results/$t.descr"); + $descrlen = length $descrs{$t} if length $descrs{$t}>$descrlen; +} + +sub have_duplicate { + my %seen; + for (@_) { + return 1 if exists $seen{$_}; + $seen{$_} = 1; + } + return 0; +} +sub have_slash { + for (@_) { + return 1 if m{/}; + } + return 0; +} + +my %newdirabbrevs = %dirabbrevs; +while (!have_duplicate(values %newdirabbrevs)) { + %dirabbrevs = %newdirabbrevs; + last if !have_slash(values %dirabbrevs); + %newdirabbrevs = %dirabbrevs; + for (values %newdirabbrevs) { + s{^[^/]*/}{}; + } +} + +my %times; +my @colwidth = ((0)x@dirs); +for my $i (0..$#dirs) { + my $d = $dirs[$i]; + my $w = length (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); + $colwidth[$i] = $w if $w > $colwidth[$i]; +} +for my $t (@subtests) { + my $firstr; + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + $times{$prefixes{$d}.$t} = [get_times("test-results/$prefixes{$d}$t.times")]; + my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; + my $w = length format_times($r,$u,$s,$firstr); + $colwidth[$i] = $w if $w > $colwidth[$i]; + $firstr = $r unless defined $firstr; + } +} +my $totalwidth = 3*@dirs+$descrlen; +$totalwidth += $_ for (@colwidth); + +printf "%-${descrlen}s", "Test"; +for my $i (0..$#dirs) { + my $d = $dirs[$i]; + printf " %-$colwidth[$i]s", (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); +} +print "\n"; +print "-"x$totalwidth, "\n"; +for my $t (@subtests) { + printf "%-${descrlen}s", $descrs{$t}; + my $firstr; + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; + printf " %-$colwidth[$i]s", format_times($r,$u,$s,$firstr); + $firstr = $r unless defined $firstr; + } + print "\n"; +} diff --git a/t/perf/min_time.perl b/t/perf/min_time.perl new file mode 100755 index 0000000000..c1a2717e07 --- /dev/null +++ b/t/perf/min_time.perl @@ -0,0 +1,21 @@ +#!/usr/bin/perl + +my $minrt = 1e100; +my $min; + +while (<>) { + # [h:]m:s.xx U.xx S.xx + /^(?:(\d+):)?(\d+):(\d+(?:\.\d+)?) (\d+(?:\.\d+)?) (\d+(?:\.\d+)?)$/ + or die "bad input line: $_"; + my $rt = ((defined $1 ? $1 : 0.0)*60+$2)*60+$3; + if ($rt < $minrt) { + $min = $_; + $minrt = $rt; + } +} + +if (!defined $min) { + die "no input found"; +} + +print $min; diff --git a/t/perf/p0000-perf-lib-sanity.sh b/t/perf/p0000-perf-lib-sanity.sh new file mode 100755 index 0000000000..2ca4aaccb8 --- /dev/null +++ b/t/perf/p0000-perf-lib-sanity.sh @@ -0,0 +1,41 @@ +#!/bin/sh + +test_description='Tests whether perf-lib facilities work' +. ./perf-lib.sh + +test_perf_default_repo + +test_perf 'test_perf_default_repo works' ' + foo=$(git rev-parse HEAD) && + test_export foo +' + +test_checkout_worktree + +test_perf 'test_checkout_worktree works' ' + wt=$(find . | wc -l) && + idx=$(git ls-files | wc -l) && + test $wt -gt $idx +' + +baz=baz +test_export baz + +test_expect_success 'test_export works' ' + echo "$foo" && + test "$foo" = "$(git rev-parse HEAD)" && + echo "$baz" && + test "$baz" = baz +' + +test_perf 'export a weird var' ' + bar="weird # variable" && + test_export bar +' + +test_expect_success 'test_export works with weird vars' ' + echo "$bar" && + test "$bar" = "weird # variable" +' + +test_done diff --git a/t/perf/p0001-rev-list.sh b/t/perf/p0001-rev-list.sh new file mode 100755 index 0000000000..4f71a63b0a --- /dev/null +++ b/t/perf/p0001-rev-list.sh @@ -0,0 +1,17 @@ +#!/bin/sh + +test_description="Tests history walking performance" + +. ./perf-lib.sh + +test_perf_default_repo + +test_perf 'rev-list --all' ' + git rev-list --all >/dev/null +' + +test_perf 'rev-list --all --objects' ' + git rev-list --all --objects >/dev/null +' + +test_done diff --git a/t/perf/p7810-grep.sh b/t/perf/p7810-grep.sh new file mode 100755 index 0000000000..9f4ade639f --- /dev/null +++ b/t/perf/p7810-grep.sh @@ -0,0 +1,23 @@ +#!/bin/sh + +test_description="git-grep performance in various modes" + +. ./perf-lib.sh + +test_perf_large_repo +test_checkout_worktree + +test_perf 'grep worktree, cheap regex' ' + git grep some_nonexistent_string || : +' +test_perf 'grep worktree, expensive regex' ' + git grep "^.* *some_nonexistent_string$" || : +' +test_perf 'grep --cached, cheap regex' ' + git grep --cached some_nonexistent_string || : +' +test_perf 'grep --cached, expensive regex' ' + git grep --cached "^.* *some_nonexistent_string$" || : +' + +test_done diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh new file mode 100644 index 0000000000..2a5e1f354d --- /dev/null +++ b/t/perf/perf-lib.sh @@ -0,0 +1,198 @@ +#!/bin/sh +# +# Copyright (c) 2011 Thomas Rast +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/ . + +# do the --tee work early; it otherwise confuses our careful +# GIT_BUILD_DIR mangling +case "$GIT_TEST_TEE_STARTED, $* " in +done,*) + # do not redirect again + ;; +*' --tee '*|*' --va'*) + mkdir -p test-results + BASE=test-results/$(basename "$0" .sh) + (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1; + echo $? > $BASE.exit) | tee $BASE.out + test "$(cat $BASE.exit)" = 0 + exit + ;; +esac + +TEST_DIRECTORY=$(pwd)/.. +TEST_OUTPUT_DIRECTORY=$(pwd) +if test -z "$GIT_TEST_INSTALLED"; then + perf_results_prefix= +else + perf_results_prefix=$(printf "%s" "${GIT_TEST_INSTALLED%/bin-wrappers}" | tr -c "[a-zA-Z0-9]" "[_*]")"." + # make the tested dir absolute + GIT_TEST_INSTALLED=$(cd "$GIT_TEST_INSTALLED" && pwd) +fi + +TEST_NO_CREATE_REPO=t + +. ../test-lib.sh + +perf_results_dir=$TEST_OUTPUT_DIRECTORY/test-results +mkdir -p "$perf_results_dir" +rm -f "$perf_results_dir"/$(basename "$0" .sh).subtests + +if test -z "$GIT_PERF_REPEAT_COUNT"; then + GIT_PERF_REPEAT_COUNT=3 +fi +die_if_build_dir_not_repo () { + if ! ( cd "$TEST_DIRECTORY/.." && + git rev-parse --build-dir >/dev/null 2>&1 ); then + error "No $1 defined, and your build directory is not a repo" + fi +} + +if test -z "$GIT_PERF_REPO"; then + die_if_build_dir_not_repo '$GIT_PERF_REPO' + GIT_PERF_REPO=$TEST_DIRECTORY/.. +fi +if test -z "$GIT_PERF_LARGE_REPO"; then + die_if_build_dir_not_repo '$GIT_PERF_LARGE_REPO' + GIT_PERF_LARGE_REPO=$TEST_DIRECTORY/.. +fi + +test_perf_create_repo_from () { + test "$#" = 2 || + error "bug in the test script: not 2 parameters to test-create-repo" + repo="$1" + source="$2" + source_git=$source/$(cd "$source" && git rev-parse --git-dir) + mkdir -p "$repo/.git" + ( + cd "$repo/.git" && + { cp -Rl "$source_git/objects" . 2>/dev/null || + cp -R "$source_git/objects" .; } && + for stuff in "$source_git"/*; do + case "$stuff" in + */objects|*/hooks|*/config) + ;; + *) + cp -R "$stuff" . || break + ;; + esac + done && + cd .. && + git init -q && + mv .git/hooks .git/hooks-disabled 2>/dev/null + ) || error "failed to copy repository '$source' to '$repo'" +} + +# call at least one of these to establish an appropriately-sized repository +test_perf_default_repo () { + test_perf_create_repo_from "${1:-$TRASH_DIRECTORY}" "$GIT_PERF_REPO" +} +test_perf_large_repo () { + if test "$GIT_PERF_LARGE_REPO" = "$GIT_BUILD_DIR"; then + echo "warning: \$GIT_PERF_LARGE_REPO is \$GIT_BUILD_DIR." >&2 + echo "warning: This will work, but may not be a sufficiently large repo" >&2 + echo "warning: for representative measurements." >&2 + fi + test_perf_create_repo_from "${1:-$TRASH_DIRECTORY}" "$GIT_PERF_LARGE_REPO" +} +test_checkout_worktree () { + git checkout-index -u -a || + error "git checkout-index failed" +} + +# Performance tests should never fail. If they do, stop immediately +immediate=t + +test_run_perf_ () { + test_cleanup=: + test_export_="test_cleanup" + export test_cleanup test_export_ + /usr/bin/time -f "%E %U %S" -o test_time.$i "$SHELL" -c ' +. '"$TEST_DIRECTORY"/../test-lib-functions.sh' +test_export () { + [ $# != 0 ] || return 0 + test_export_="$test_export_\\|$1" + shift + test_export "$@" +} +'"$1"' +ret=$? +set | sed -n "s'"/'/'\\\\''/g"';s/^\\($test_export_\\)/export '"'&'"'/p" >test_vars +exit $ret' >&3 2>&4 + eval_ret=$? + + if test $eval_ret = 0 || test -n "$expecting_failure" + then + test_eval_ "$test_cleanup" + . ./test_vars || error "failed to load updated environment" + fi + if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"; then + echo "" + fi + return "$eval_ret" +} + + +test_perf () { + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= + test "$#" = 2 || + error "bug in the test script: not 2 or 3 parameters to test-expect-success" + export test_prereq + if ! test_skip "$@" + then + base=$(basename "$0" .sh) + echo "$test_count" >>"$perf_results_dir"/$base.subtests + echo "$1" >"$perf_results_dir"/$base.$test_count.descr + if test -z "$verbose"; then + echo -n "perf $test_count - $1:" + else + echo "perf $test_count - $1:" + fi + for i in $(seq 1 $GIT_PERF_REPEAT_COUNT); do + say >&3 "running: $2" + if test_run_perf_ "$2" + then + if test -z "$verbose"; then + echo -n " $i" + else + echo "* timing run $i/$GIT_PERF_REPEAT_COUNT:" + fi + else + test -z "$verbose" && echo + test_failure_ "$@" + break + fi + done + if test -z "$verbose"; then + echo " ok" + else + test_ok_ "$1" + fi + base="$perf_results_dir"/"$perf_results_prefix$(basename "$0" .sh)"."$test_count" + "$TEST_DIRECTORY"/perf/min_time.perl test_time.* >"$base".times + fi + echo >&3 "" +} + +# We extend test_done to print timings at the end (./run disables this +# and does it after running everything) +test_at_end_hook_ () { + if test -z "$GIT_PERF_AGGREGATING_LATER"; then + ( cd "$TEST_DIRECTORY"/perf && ./aggregate.perl $(basename "$0") ) + fi +} + +test_export () { + export "$@" +} diff --git a/t/perf/run b/t/perf/run new file mode 100755 index 0000000000..cfd70129bb --- /dev/null +++ b/t/perf/run @@ -0,0 +1,82 @@ +#!/bin/sh + +case "$1" in + --help) + echo "usage: $0 [other_git_tree...] [--] [test_scripts]" + exit 0 + ;; +esac + +die () { + echo >&2 "error: $*" + exit 1 +} + +run_one_dir () { + if test $# -eq 0; then + set -- p????-*.sh + fi + echo "=== Running $# tests in ${GIT_TEST_INSTALLED:-this tree} ===" + for t in "$@"; do + ./$t $GIT_TEST_OPTS + done +} + +unpack_git_rev () { + rev=$1 + mkdir -p build/$rev + (cd "$(git rev-parse --show-cdup)" && git archive --format=tar $rev) | + (cd build/$rev && tar x) +} +build_git_rev () { + rev=$1 + cp ../../config.mak build/$rev/config.mak + (cd build/$rev && make $GIT_PERF_MAKE_OPTS) || + die "failed to build revision '$mydir'" +} + +run_dirs_helper () { + mydir=${1%/} + shift + while test $# -gt 0 -a "$1" != -- -a ! -f "$1"; do + shift + done + if test $# -gt 0 -a "$1" = --; then + shift + fi + if [ ! -d "$mydir" ]; then + rev=$(git rev-parse --verify "$mydir" 2>/dev/null) || + die "'$mydir' is neither a directory nor a valid revision" + if [ ! -d build/$rev ]; then + unpack_git_rev $rev + fi + build_git_rev $rev + mydir=build/$rev + fi + if test "$mydir" = .; then + unset GIT_TEST_INSTALLED + else + GIT_TEST_INSTALLED="$mydir/bin-wrappers" + export GIT_TEST_INSTALLED + fi + run_one_dir "$@" +} + +run_dirs () { + while test $# -gt 0 -a "$1" != -- -a ! -f "$1"; do + run_dirs_helper "$@" + shift + done +} + +GIT_PERF_AGGREGATING_LATER=t +export GIT_PERF_AGGREGATING_LATER + +cd "$(dirname $0)" +. ../../GIT-BUILD-OPTIONS + +if test $# = 0 -o "$1" = -- -o -f "$1"; then + set -- . "$@" +fi +run_dirs "$@" +./aggregate.perl "$@" diff --git a/t/t1051-large-conversion.sh b/t/t1051-large-conversion.sh new file mode 100755 index 0000000000..8b7640b3ba --- /dev/null +++ b/t/t1051-large-conversion.sh @@ -0,0 +1,86 @@ +#!/bin/sh + +test_description='test conversion filters on large files' +. ./test-lib.sh + +set_attr() { + test_when_finished 'rm -f .gitattributes' && + echo "* $*" >.gitattributes +} + +check_input() { + git read-tree --empty && + git add small large && + git cat-file blob :small >small.index && + git cat-file blob :large | head -n 1 >large.index && + test_cmp small.index large.index +} + +check_output() { + rm -f small large && + git checkout small large && + head -n 1 large >large.head && + test_cmp small large.head +} + +test_expect_success 'setup input tests' ' + printf "\$Id: foo\$\\r\\n" >small && + cat small small >large && + git config core.bigfilethreshold 20 && + git config filter.test.clean "sed s/.*/CLEAN/" +' + +test_expect_success 'autocrlf=true converts on input' ' + test_config core.autocrlf true && + check_input +' + +test_expect_success 'eol=crlf converts on input' ' + set_attr eol=crlf && + check_input +' + +test_expect_success 'ident converts on input' ' + set_attr ident && + check_input +' + +test_expect_success 'user-defined filters convert on input' ' + set_attr filter=test && + check_input +' + +test_expect_success 'setup output tests' ' + echo "\$Id\$" >small && + cat small small >large && + git add small large && + git config core.bigfilethreshold 7 && + git config filter.test.smudge "sed s/.*/SMUDGE/" +' + +test_expect_success 'autocrlf=true converts on output' ' + test_config core.autocrlf true && + check_output +' + +test_expect_success 'eol=crlf converts on output' ' + set_attr eol=crlf && + check_output +' + +test_expect_success 'user-defined filters convert on output' ' + set_attr filter=test && + check_output +' + +test_expect_success 'ident converts on output' ' + set_attr ident && + rm -f small large && + git checkout small large && + sed -n "s/Id: .*/Id: SHA/p" <small >small.clean && + head -n 1 large >large.head && + sed -n "s/Id: .*/Id: SHA/p" <large.head >large.clean && + test_cmp small.clean large.clean +' + +test_done diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 0690e0edf4..5f249f681e 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -451,13 +451,21 @@ test_expect_success 'refer config from subdirectory' ' mkdir x && ( cd x && - echo strasse >expect + echo strasse >expect && git config --get --file ../other-config ein.bahn >actual && test_cmp expect actual ) ' +test_expect_success 'refer config from subdirectory via GIT_CONFIG' ' + ( + cd x && + GIT_CONFIG=../other-config git config --get ein.bahn >actual && + test_cmp expect actual + ) +' + cat > expect << EOF [ein] bahn = strasse @@ -960,4 +968,21 @@ test_expect_success 'git -c complains about empty key and value' ' test_must_fail git -c "" rev-parse ' +test_expect_success 'git config --edit works' ' + git config -f tmp test.value no && + echo test.value=yes >expect && + GIT_EDITOR="echo [test]value=yes >" git config -f tmp --edit && + git config -f tmp --list >actual && + test_cmp expect actual +' + +test_expect_success 'git config --edit respects core.editor' ' + git config -f tmp test.value no && + echo test.value=yes >expect && + test_config core.editor "echo [test]value=yes >" && + git config -f tmp --edit && + git config -f tmp --list >actual && + test_cmp expect actual +' + test_done diff --git a/t/t1305-config-include.sh b/t/t1305-config-include.sh new file mode 100755 index 0000000000..4b1cbaa028 --- /dev/null +++ b/t/t1305-config-include.sh @@ -0,0 +1,134 @@ +#!/bin/sh + +test_description='test config file include directives' +. ./test-lib.sh + +test_expect_success 'include file by absolute path' ' + echo "[test]one = 1" >one && + echo "[include]path = \"$(pwd)/one\"" >.gitconfig && + echo 1 >expect && + git config test.one >actual && + test_cmp expect actual +' + +test_expect_success 'include file by relative path' ' + echo "[test]one = 1" >one && + echo "[include]path = one" >.gitconfig && + echo 1 >expect && + git config test.one >actual && + test_cmp expect actual +' + +test_expect_success 'chained relative paths' ' + mkdir subdir && + echo "[test]three = 3" >subdir/three && + echo "[include]path = three" >subdir/two && + echo "[include]path = subdir/two" >.gitconfig && + echo 3 >expect && + git config test.three >actual && + test_cmp expect actual +' + +test_expect_success 'include options can still be examined' ' + echo "[test]one = 1" >one && + echo "[include]path = one" >.gitconfig && + echo one >expect && + git config include.path >actual && + test_cmp expect actual +' + +test_expect_success 'listing includes option and expansion' ' + echo "[test]one = 1" >one && + echo "[include]path = one" >.gitconfig && + cat >expect <<-\EOF && + include.path=one + test.one=1 + EOF + git config --list >actual.full && + grep -v ^core actual.full >actual && + test_cmp expect actual +' + +test_expect_success 'single file lookup does not expand includes by default' ' + echo "[test]one = 1" >one && + echo "[include]path = one" >.gitconfig && + test_must_fail git config -f .gitconfig test.one && + test_must_fail git config --global test.one && + echo 1 >expect && + git config --includes -f .gitconfig test.one >actual && + test_cmp expect actual +' + +test_expect_success 'single file list does not expand includes by default' ' + echo "[test]one = 1" >one && + echo "[include]path = one" >.gitconfig && + echo "include.path=one" >expect && + git config -f .gitconfig --list >actual && + test_cmp expect actual +' + +test_expect_success 'writing config file does not expand includes' ' + echo "[test]one = 1" >one && + echo "[include]path = one" >.gitconfig && + git config test.two 2 && + echo 2 >expect && + git config --no-includes test.two >actual && + test_cmp expect actual && + test_must_fail git config --no-includes test.one +' + +test_expect_success 'config modification does not affect includes' ' + echo "[test]one = 1" >one && + echo "[include]path = one" >.gitconfig && + git config test.one 2 && + echo 1 >expect && + git config -f one test.one >actual && + test_cmp expect actual && + cat >expect <<-\EOF && + 1 + 2 + EOF + git config --get-all test.one >actual && + test_cmp expect actual +' + +test_expect_success 'missing include files are ignored' ' + cat >.gitconfig <<-\EOF && + [include]path = foo + [test]value = yes + EOF + echo yes >expect && + git config test.value >actual && + test_cmp expect actual +' + +test_expect_success 'absolute includes from command line work' ' + echo "[test]one = 1" >one && + echo 1 >expect && + git -c include.path="$PWD/one" config test.one >actual && + test_cmp expect actual +' + +test_expect_success 'relative includes from command line fail' ' + echo "[test]one = 1" >one && + test_must_fail git -c include.path=one config test.one +' + +test_expect_success 'include cycles are detected' ' + cat >.gitconfig <<-\EOF && + [test]value = gitconfig + [include]path = cycle + EOF + cat >cycle <<-\EOF && + [test]value = cycle + [include]path = .gitconfig + EOF + cat >expect <<-\EOF && + gitconfig + cycle + EOF + test_must_fail git config --get-all test.value 2>stderr && + grep "exceeded maximum include depth" stderr +' + +test_done diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 523ce9c45b..5b8ebd8053 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -191,4 +191,30 @@ test_expect_success 'cleaned up' ' test_cmp empty actual ' +test_expect_success 'rev-list --verify-objects' ' + git rev-list --verify-objects --all >/dev/null 2>out && + test_cmp empty out +' + +test_expect_success 'rev-list --verify-objects with bad sha1' ' + sha=$(echo blob | git hash-object -w --stdin) && + old=$(echo $sha | sed "s+^..+&/+") && + new=$(dirname $old)/ffffffffffffffffffffffffffffffffffffff && + sha="$(dirname $new)$(basename $new)" && + mv .git/objects/$old .git/objects/$new && + test_when_finished "remove_object $sha" && + git update-index --add --cacheinfo 100644 $sha foo && + test_when_finished "git read-tree -u --reset HEAD" && + tree=$(git write-tree) && + test_when_finished "remove_object $tree" && + cmt=$(echo bogus | git commit-tree $tree) && + test_when_finished "remove_object $cmt" && + git update-ref refs/heads/bogus $cmt && + test_when_finished "git update-ref -d refs/heads/bogus" && + + test_might_fail git rev-list --verify-objects refs/heads/bogus >/dev/null 2>out && + cat out && + grep -q "error: sha1 mismatch 63ffffffffffffffffffffffffffffffffffffff" out +' + test_done diff --git a/t/t3700-add.sh b/t/t3700-add.sh index 575d9508a0..874b3a6444 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -179,6 +179,21 @@ test_expect_success 'git add --refresh' ' test -z "`git diff-index HEAD -- foo`" ' +test_expect_success 'git add --refresh with pathspec' ' + git reset --hard && + echo >foo && echo >bar && echo >baz && + git add foo bar baz && H=$(git rev-parse :foo) && git rm -f foo && + echo "100644 $H 3 foo" | git update-index --index-info && + test-chmtime -60 bar baz && + >expect && + git add --refresh bar >actual && + test_cmp expect actual && + + git diff-files --name-only >actual && + ! grep bar actual&& + grep baz actual +' + test_expect_success POSIXPERM,SANITY 'git add should fail atomically upon an unreadable file' ' git reset --hard && date >foo1 && diff --git a/t/t4150-am.sh b/t/t4150-am.sh index f1b60b8560..6f77fffee6 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -505,4 +505,14 @@ test_expect_success 'am -q is quiet' ' ! test -s output.out ' +test_expect_success 'am empty-file does not infloop' ' + rm -fr .git/rebase-apply && + git reset --hard && + touch empty-file && + test_tick && + { git am empty-file > actual 2>&1 && false || :; } && + echo Patch format detection failed. >expected && + test_cmp expected actual +' + test_done diff --git a/t/t5504-fetch-receive-strict.sh b/t/t5504-fetch-receive-strict.sh index 8341fc4d15..35ec294d9a 100755 --- a/t/t5504-fetch-receive-strict.sh +++ b/t/t5504-fetch-receive-strict.sh @@ -58,6 +58,11 @@ test_expect_success 'fetch with transfer.fsckobjects' ' ) ' +cat >exp <<EOF +To dst +! refs/heads/master:refs/heads/test [remote rejected] (missing necessary objects) +EOF + test_expect_success 'push without strict' ' rm -rf dst && git init dst && @@ -66,7 +71,8 @@ test_expect_success 'push without strict' ' git config fetch.fsckobjects false && git config transfer.fsckobjects false ) && - git push dst master:refs/heads/test + test_must_fail git push --porcelain dst master:refs/heads/test >act && + test_cmp exp act ' test_expect_success 'push with !receive.fsckobjects' ' @@ -77,9 +83,15 @@ test_expect_success 'push with !receive.fsckobjects' ' git config receive.fsckobjects false && git config transfer.fsckobjects true ) && - git push dst master:refs/heads/test + test_must_fail git push --porcelain dst master:refs/heads/test >act && + test_cmp exp act ' +cat >exp <<EOF +To dst +! refs/heads/master:refs/heads/test [remote rejected] (n/a (unpacker error)) +EOF + test_expect_success 'push with receive.fsckobjects' ' rm -rf dst && git init dst && @@ -88,7 +100,8 @@ test_expect_success 'push with receive.fsckobjects' ' git config receive.fsckobjects true && git config transfer.fsckobjects false ) && - test_must_fail git push dst master:refs/heads/test + test_must_fail git push --porcelain dst master:refs/heads/test >act && + test_cmp exp act ' test_expect_success 'push with transfer.fsckobjects' ' @@ -98,7 +111,8 @@ test_expect_success 'push with transfer.fsckobjects' ' cd dst && git config transfer.fsckobjects true ) && - test_must_fail git push dst master:refs/heads/test + test_must_fail git push --porcelain dst master:refs/heads/test >act && + test_cmp exp act ' test_done diff --git a/t/t5523-push-upstream.sh b/t/t5523-push-upstream.sh index 9ee52cfc45..3683df13a6 100755 --- a/t/t5523-push-upstream.sh +++ b/t/t5523-push-upstream.sh @@ -101,10 +101,11 @@ test_expect_success TTY 'push -q suppresses progress' ' ! grep "Writing objects" err ' -test_expect_failure TTY 'push --no-progress suppresses progress' ' +test_expect_success TTY 'push --no-progress suppresses progress' ' ensure_fresh_upstream && test_terminal git push -u --no-progress upstream master >out 2>err && + ! grep "Unpacking objects" err && ! grep "Writing objects" err ' diff --git a/t/t5541-http-push.sh b/t/t5541-http-push.sh index d66ed24508..cc6f081711 100755 --- a/t/t5541-http-push.sh +++ b/t/t5541-http-push.sh @@ -106,7 +106,7 @@ cat >exp <<EOF remote: error: hook declined to update refs/heads/dev2 To http://127.0.0.1:$LIB_HTTPD_PORT/smart/test_repo.git ! [remote rejected] dev2 -> dev2 (hook declined) -error: failed to push some refs to 'http://127.0.0.1:5541/smart/test_repo.git' +error: failed to push some refs to 'http://127.0.0.1:$LIB_HTTPD_PORT/smart/test_repo.git' EOF test_expect_success 'rejected update prints status' ' diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 4ef79aabc4..f8c247a750 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1282,4 +1282,43 @@ test_expect_success 'mixing incompatibles modes and options is forbidden' ' test_must_fail git tag -v -s ' +# check points-at + +test_expect_success '--points-at cannot be used in non-list mode' ' + test_must_fail git tag --points-at=v4.0 foo +' + +test_expect_success '--points-at finds lightweight tags' ' + echo v4.0 >expect && + git tag --points-at v4.0 >actual && + test_cmp expect actual +' + +test_expect_success '--points-at finds annotated tags of commits' ' + git tag -m "v4.0, annotated" annotated-v4.0 v4.0 && + echo annotated-v4.0 >expect && + git tag -l --points-at v4.0 "annotated*" >actual && + test_cmp expect actual +' + +test_expect_success '--points-at finds annotated tags of tags' ' + git tag -m "describing the v4.0 tag object" \ + annotated-again-v4.0 annotated-v4.0 && + cat >expect <<-\EOF && + annotated-again-v4.0 + annotated-v4.0 + EOF + git tag --points-at=annotated-v4.0 >actual && + test_cmp expect actual +' + +test_expect_success 'multiple --points-at are OR-ed together' ' + cat >expect <<-\EOF && + v2.0 + v3.0 + EOF + git tag --points-at=v2.0 --points-at=v3.0 >actual && + test_cmp expect actual +' + test_done diff --git a/t/t9100-git-svn-basic.sh b/t/t9100-git-svn-basic.sh index b041516a1d..749b75e8d4 100755 --- a/t/t9100-git-svn-basic.sh +++ b/t/t9100-git-svn-basic.sh @@ -65,7 +65,8 @@ test_expect_success "$name" " git update-index --add dir/file/file && git commit -m '$name' && test_must_fail git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch" || true + ${remotes_git_svn}..mybranch +" name='detect node change from directory to file #1' @@ -79,7 +80,8 @@ test_expect_success "$name" ' git update-index --add -- bar && git commit -m "$name" && test_must_fail git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch2' || true + ${remotes_git_svn}..mybranch2 +' name='detect node change from file to directory #2' @@ -92,9 +94,12 @@ test_expect_success "$name" ' echo yyy > bar/zzz/yyy && git update-index --add bar/zzz/yyy && git commit -m "$name" && - test_must_fail git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch3' || true - + git svn set-tree --find-copies-harder --rmdir \ + ${remotes_git_svn}..mybranch3 && + svn_cmd up "$SVN_TREE" && + test -d "$SVN_TREE"/bar/zzz && + test -e "$SVN_TREE"/bar/zzz/yyy +' name='detect node change from directory to file #2' test_expect_success "$name" ' @@ -107,7 +112,8 @@ test_expect_success "$name" ' git update-index --add -- dir && git commit -m "$name" && test_must_fail git svn set-tree --find-copies-harder --rmdir \ - ${remotes_git_svn}..mybranch4' || true + ${remotes_git_svn}..mybranch4 +' name='remove executable bit from a file' @@ -134,10 +140,10 @@ test_expect_success "$name" ' test -x "$SVN_TREE"/exec.sh' -name='executable file becomes a symlink to bar/zzz (file)' +name='executable file becomes a symlink to file' test_expect_success "$name" ' rm exec.sh && - ln -s bar/zzz exec.sh && + ln -s file exec.sh && git update-index exec.sh && git commit -m "$name" && git svn set-tree --find-copies-harder --rmdir \ @@ -148,19 +154,19 @@ test_expect_success "$name" ' name='new symlink is added to a file that was also just made executable' test_expect_success "$name" ' - chmod +x bar/zzz && - ln -s bar/zzz exec-2.sh && - git update-index --add bar/zzz exec-2.sh && + chmod +x file && + ln -s file exec-2.sh && + git update-index --add file exec-2.sh && git commit -m "$name" && git svn set-tree --find-copies-harder --rmdir \ ${remotes_git_svn}..mybranch5 && svn_cmd up "$SVN_TREE" && - test -x "$SVN_TREE"/bar/zzz && + test -x "$SVN_TREE"/file && test -h "$SVN_TREE"/exec-2.sh' name='modify a symlink to become a file' test_expect_success "$name" ' - echo git help > help || true && + echo git help >help && rm exec-2.sh && cp help exec-2.sh && git update-index exec-2.sh && @@ -195,14 +201,15 @@ name='check imported tree checksums expected tree checksums' rm -f expected if test_have_prereq UTF8 then - echo tree bf522353586b1b883488f2bc73dab0d9f774b9a9 > expected + echo tree dc68b14b733e4ec85b04ab6f712340edc5dc936e > expected fi cat >> expected <<\EOF -tree 83654bb36f019ae4fe77a0171f81075972087624 -tree 031b8d557afc6fea52894eaebb45bec52f1ba6d1 -tree 0b094cbff17168f24c302e297f55bfac65eb8bd3 -tree d667270a1f7b109f5eb3aaea21ede14b56bfdd6e -tree 56a30b966619b863674f5978696f4a3594f2fca9 +tree c3322890dcf74901f32d216f05c5044f670ce632 +tree d3ccd5035feafd17b030c5732e7808cc49122853 +tree d03e1630363d4881e68929d532746b20b0986b83 +tree 149d63cd5878155c846e8c55d7d8487de283f89e +tree 312b76e4f64ce14893aeac8591eb3960b065e247 +tree 149d63cd5878155c846e8c55d7d8487de283f89e tree d667270a1f7b109f5eb3aaea21ede14b56bfdd6e tree 8f51f74cf0163afc9ad68a4b1537288c4558b5a4 EOF diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index 0f771c673d..90bb6050c1 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -638,6 +638,45 @@ test_expect_success \ 'gitweb_run "p=.git;a=tree"' # ---------------------------------------------------------------------- +# searching + +cat >>gitweb_config.perl <<\EOF + +# enable search +$feature{'search'}{'default'} = [1]; +$feature{'grep'}{'default'} = [1]; +$feature{'pickaxe'}{'default'} = [1]; +EOF + +test_expect_success \ + 'search: preparation' \ + 'echo "1st MATCH" >>file && + echo "2nd MATCH" >>file && + echo "MATCH" >>bar && + git add file bar && + git commit -m "Added MATCH word"' + +test_expect_success \ + 'search: commit author' \ + 'gitweb_run "p=.git;a=search;h=HEAD;st=author;s=A+U+Thor"' + +test_expect_success \ + 'search: commit message' \ + 'gitweb_run "p=.git;a=search;h=HEAD;st=commitr;s=MATCH"' + +test_expect_success \ + 'search: grep' \ + 'gitweb_run "p=.git;a=search;h=HEAD;st=grep;s=MATCH"' + +test_expect_success \ + 'search: pickaxe' \ + 'gitweb_run "p=.git;a=search;h=HEAD;st=pickaxe;s=MATCH"' + +test_expect_success \ + 'search: projects' \ + 'gitweb_run "a=project_list;s=.git"' + +# ---------------------------------------------------------------------- # non-ASCII in README.html test_expect_success \ @@ -739,4 +778,13 @@ test_expect_success \ 'echo "\$projects_list_group_categories = 1;" >>gitweb_config.perl && gitweb_run' +# ---------------------------------------------------------------------- +# unborn branches + +test_expect_success \ + 'unborn HEAD: "summary" page (with "heads" subview)' \ + 'git checkout orphan_branch || git checkout --orphan orphan_branch && + test_when_finished "git checkout master" && + gitweb_run "p=.git;a=summary"' + test_done diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 04ee20e642..486c8eeb7e 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -234,8 +234,10 @@ test_expect_success 'refuse to preserve users without perms' ' git config git-p4.skipSubmitEditCheck true && echo "username-noperms: a change by alice" >>file1 && git commit --author "Alice <alice@localhost>" -m "perms: a change by alice" file1 && - P4EDITOR=touch P4USER=bob P4PASSWD=secret test_must_fail "$GITP4" commit --preserve-user && - test_must_fail git diff --exit-code HEAD..p4/master + P4EDITOR=touch P4USER=bob P4PASSWD=secret && + export P4EDITOR P4USER P4PASSWD && + test_must_fail "$GITP4" commit --preserve-user && + ! git diff --exit-code HEAD..p4/master ) ' @@ -250,13 +252,15 @@ test_expect_success 'preserve user where author is unknown to p4' ' git commit --author "Bob <bob@localhost>" -m "preserve: a change by bob" file1 && echo "username-unknown: a change by charlie" >>file1 && git commit --author "Charlie <charlie@localhost>" -m "preserve: a change by charlie" file1 && - P4EDITOR=touch P4USER=alice P4PASSWD=secret test_must_fail "$GITP4" commit --preserve-user && - test_must_fail git diff --exit-code HEAD..p4/master && + P4EDITOR=touch P4USER=alice P4PASSWD=secret && + export P4EDITOR P4USER P4PASSWD && + test_must_fail "$GITP4" commit --preserve-user && + ! git diff --exit-code HEAD..p4/master && echo "$0: repeat with allowMissingP4Users enabled" && git config git-p4.allowMissingP4Users true && git config git-p4.preserveUser true && - P4EDITOR=touch P4USER=alice P4PASSWD=secret "$GITP4" commit && + "$GITP4" commit && git diff --exit-code HEAD..p4/master && p4_check_commit_author file1 alice ) @@ -275,20 +279,22 @@ test_expect_success 'not preserving user with mixed authorship' ' p4_add_user derek Derek && make_change_by_user usernamefile3 Derek derek@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit |\ + P4EDITOR=cat P4USER=alice P4PASSWD=secret && + export P4EDITOR P4USER P4PASSWD && + "$GITP4" commit |\ grep "git author derek@localhost does not match" && make_change_by_user usernamefile3 Charlie charlie@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit |\ + "$GITP4" commit |\ grep "git author charlie@localhost does not match" && make_change_by_user usernamefile3 alice alice@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" |\ + "$GITP4" commit |\ test_must_fail grep "git author.*does not match" && git config git-p4.skipUserNameCheck true && make_change_by_user usernamefile3 Charlie charlie@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit |\ + "$GITP4" commit |\ test_must_fail grep "git author.*does not match" && p4_check_commit_author usernamefile3 alice diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh index ae9145e307..773a516ff0 100755 --- a/t/t9809-git-p4-client-view.sh +++ b/t/t9809-git-p4-client-view.sh @@ -31,7 +31,7 @@ client_view() { # check_files_exist() { ok=0 && - num=${#@} && + num=$# && for arg ; do test_path_is_file "$arg" && ok=$(($ok + 1)) @@ -71,20 +71,24 @@ git_verify() { # - dir2 # - file21 # - file22 +init_depot() { + for d in 1 2 ; do + mkdir -p dir$d && + for f in 1 2 ; do + echo dir$d/file$d$f >dir$d/file$d$f && + p4 add dir$d/file$d$f && + p4 submit -d "dir$d/file$d$f" + done + done && + find . -type f ! -name files >files && + check_files_exist dir1/file11 dir1/file12 \ + dir2/file21 dir2/file22 +} + test_expect_success 'init depot' ' ( cd "$cli" && - for d in 1 2 ; do - mkdir -p dir$d && - for f in 1 2 ; do - echo dir$d/file$d$f >dir$d/file$d$f && - p4 add dir$d/file$d$f && - p4 submit -d "dir$d/file$d$f" - done - done && - find . -type f ! -name files >files && - check_files_exist dir1/file11 dir1/file12 \ - dir2/file21 dir2/file22 + init_depot ) ' @@ -247,6 +251,139 @@ test_expect_success 'quotes on rhs only' ' ' # +# Submit tests +# + +# clone sets variable +test_expect_success 'clone --use-client-spec sets useClientSpec' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + ( + cd "$git" && + git config --bool git-p4.useClientSpec >actual && + echo true >true && + test_cmp actual true + ) +' + +# clone just a subdir of the client spec +test_expect_success 'subdir clone' ' + client_view "//depot/... //client/..." && + files="dir1/file11 dir1/file12 dir2/file21 dir2/file22" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + git_verify dir1/file11 dir1/file12 +' + +# +# submit back, see what happens: five cases +# +test_expect_success 'subdir clone, submit modify' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + echo line >>dir1/file12 && + git add dir1/file12 && + git commit -m dir1/file12 && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file12 && + test_line_count = 2 dir1/file12 + ) +' + +test_expect_success 'subdir clone, submit add' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + echo file13 >dir1/file13 && + git add dir1/file13 && + git commit -m dir1/file13 && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file13 + ) +' + +test_expect_success 'subdir clone, submit delete' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git rm dir1/file12 && + git commit -m "delete dir1/file12" && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_missing dir1/file12 + ) +' + +test_expect_success 'subdir clone, submit copy' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.detectCopies true && + cp dir1/file11 dir1/file11a && + git add dir1/file11a && + git commit -m "copy to dir1/file11a" && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file11a + ) +' + +test_expect_success 'subdir clone, submit rename' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.detectRenames true && + git mv dir1/file13 dir1/file13a && + git commit -m "rename dir1/file13 to dir1/file13a" && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_missing dir1/file13 && + test_path_is_file dir1/file13a + ) +' + +test_expect_success 'reinit depot' ' + ( + cd "$cli" && + p4 sync -f && + rm files && + p4 delete */* && + p4 submit -d "delete all files" && + init_depot + ) +' + +# # What happens when two files of the same name are overlayed together? # The last-listed file should take preference. # diff --git a/t/t9810-git-p4-rcs.sh b/t/t9810-git-p4-rcs.sh new file mode 100755 index 0000000000..49dfde0616 --- /dev/null +++ b/t/t9810-git-p4-rcs.sh @@ -0,0 +1,388 @@ +#!/bin/sh + +test_description='git-p4 rcs keywords' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +# +# Make one file with keyword lines at the top, and +# enough plain text to be able to test modifications +# far away from the keywords. +# +test_expect_success 'init depot' ' + ( + cd "$cli" && + cat <<-\EOF >filek && + $Id$ + /* $Revision$ */ + # $Change$ + line4 + line5 + line6 + line7 + line8 + EOF + cp filek fileko && + sed -i "s/Revision/Revision: do not scrub me/" fileko + cp fileko file_text && + sed -i "s/Id/Id: do not scrub me/" file_text + p4 add -t text+k filek && + p4 submit -d "filek" && + p4 add -t text+ko fileko && + p4 submit -d "fileko" && + p4 add -t text file_text && + p4 submit -d "file_text" + ) +' + +# +# Generate these in a function to make it easy to use single quote marks. +# +write_scrub_scripts () { + cat >"$TRASH_DIRECTORY/scrub_k.py" <<-\EOF && + import re, sys + sys.stdout.write(re.sub(r'(?i)\$(Id|Header|Author|Date|DateTime|Change|File|Revision):[^$]*\$', r'$\1$', sys.stdin.read())) + EOF + cat >"$TRASH_DIRECTORY/scrub_ko.py" <<-\EOF + import re, sys + sys.stdout.write(re.sub(r'(?i)\$(Id|Header):[^$]*\$', r'$\1$', sys.stdin.read())) + EOF +} + +test_expect_success 'scrub scripts' ' + write_scrub_scripts +' + +# +# Compare $cli/file to its scrubbed version, should be different. +# Compare scrubbed $cli/file to $git/file, should be same. +# +scrub_k_check () { + file="$1" && + scrub="$TRASH_DIRECTORY/$file" && + "$PYTHON_PATH" "$TRASH_DIRECTORY/scrub_k.py" <"$git/$file" >"$scrub" && + ! test_cmp "$cli/$file" "$scrub" && + test_cmp "$git/$file" "$scrub" && + rm "$scrub" +} +scrub_ko_check () { + file="$1" && + scrub="$TRASH_DIRECTORY/$file" && + "$PYTHON_PATH" "$TRASH_DIRECTORY/scrub_ko.py" <"$git/$file" >"$scrub" && + ! test_cmp "$cli/$file" "$scrub" && + test_cmp "$git/$file" "$scrub" && + rm "$scrub" +} + +# +# Modify far away from keywords. If no RCS lines show up +# in the diff, there is no conflict. +# +test_expect_success 'edit far away from RCS lines' ' + test_when_finished cleanup_git && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + sed -i "s/^line7/line7 edit/" filek && + git commit -m "filek line7 edit" filek && + "$GITP4" submit && + scrub_k_check filek + ) +' + +# +# Modify near the keywords. This will require RCS scrubbing. +# +test_expect_success 'edit near RCS lines' ' + test_when_finished cleanup_git && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.attemptRCSCleanup true && + sed -i "s/^line4/line4 edit/" filek && + git commit -m "filek line4 edit" filek && + "$GITP4" submit && + scrub_k_check filek + ) +' + +# +# Modify the keywords themselves. This also will require RCS scrubbing. +# +test_expect_success 'edit keyword lines' ' + test_when_finished cleanup_git && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.attemptRCSCleanup true && + sed -i "/Revision/d" filek && + git commit -m "filek remove Revision line" filek && + "$GITP4" submit && + scrub_k_check filek + ) +' + +# +# Scrubbing text+ko files should not alter all keywords, just Id, Header. +# +test_expect_success 'scrub ko files differently' ' + test_when_finished cleanup_git && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.attemptRCSCleanup true && + sed -i "s/^line4/line4 edit/" fileko && + git commit -m "fileko line4 edit" fileko && + "$GITP4" submit && + scrub_ko_check fileko && + ! scrub_k_check fileko + ) +' + +# hack; git-p4 submit should do it on its own +test_expect_success 'cleanup after failure' ' + ( + cd "$cli" && + p4 revert ... + ) +' + +# +# Do not scrub anything but +k or +ko files. Sneak a change into +# the cli file so that submit will get a conflict. Make sure that +# scrubbing doesn't make a mess of things. +# +# Assumes that git-p4 exits leaving the p4 file open, with the +# conflict-generating patch unapplied. +# +# This might happen only if the git repo is behind the p4 repo at +# submit time, and there is a conflict. +# +test_expect_success 'do not scrub plain text' ' + test_when_finished cleanup_git && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.attemptRCSCleanup true && + sed -i "s/^line4/line4 edit/" file_text && + git commit -m "file_text line4 edit" file_text && + ( + cd "$cli" && + p4 open file_text && + sed -i "s/^line5/line5 p4 edit/" file_text && + p4 submit -d "file5 p4 edit" + ) && + ! "$GITP4" submit && + ( + # exepct something like: + # file_text - file(s) not opened on this client + # but not copious diff output + cd "$cli" && + p4 diff file_text >wc && + test_line_count = 1 wc + ) + ) +' + +# hack; git-p4 submit should do it on its own +test_expect_success 'cleanup after failure 2' ' + ( + cd "$cli" && + p4 revert ... + ) +' + +create_kw_file () { + cat <<\EOF >"$1" +/* A file + Id: $Id$ + Revision: $Revision$ + File: $File$ + */ +int main(int argc, const char **argv) { + return 0; +} +EOF +} + +test_expect_success 'add kwfile' ' + ( + cd "$cli" && + echo file1 >file1 && + p4 add file1 && + p4 submit -d "file 1" && + create_kw_file kwfile1.c && + p4 add kwfile1.c && + p4 submit -d "Add rcw kw file" kwfile1.c + ) +' + +p4_append_to_file () { + f="$1" && + p4 edit -t ktext "$f" && + echo "/* $(date) */" >>"$f" && + p4 submit -d "appending a line in p4" +} + +# Create some files with RCS keywords. If they get modified +# elsewhere then the version number gets bumped which then +# results in a merge conflict if we touch the RCS kw lines, +# even though the change itself would otherwise apply cleanly. +test_expect_success 'cope with rcs keyword expansion damage' ' + test_when_finished cleanup_git && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.attemptRCSCleanup true && + (cd ../cli && p4_append_to_file kwfile1.c) && + old_lines=$(wc -l <kwfile1.c) && + perl -n -i -e "print unless m/Revision:/" kwfile1.c && + new_lines=$(wc -l <kwfile1.c) && + test $new_lines = $(($old_lines - 1)) && + + git add kwfile1.c && + git commit -m "Zap an RCS kw line" && + "$GITP4" submit && + "$GITP4" rebase && + git diff p4/master && + "$GITP4" commit && + echo "try modifying in both" && + cd "$cli" && + p4 edit kwfile1.c && + echo "line from p4" >>kwfile1.c && + p4 submit -d "add a line in p4" kwfile1.c && + cd "$git" && + echo "line from git at the top" | cat - kwfile1.c >kwfile1.c.new && + mv kwfile1.c.new kwfile1.c && + git commit -m "Add line in git at the top" kwfile1.c && + "$GITP4" rebase && + "$GITP4" submit + ) +' + +test_expect_success 'cope with rcs keyword file deletion' ' + test_when_finished cleanup_git && + ( + cd "$cli" && + echo "\$Revision\$" >kwdelfile.c && + p4 add -t ktext kwdelfile.c && + p4 submit -d "Add file to be deleted" && + cat kwdelfile.c && + grep 1 kwdelfile.c + ) && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + grep Revision kwdelfile.c && + git rm -f kwdelfile.c && + git commit -m "Delete a file containing RCS keywords" && + git config git-p4.skipSubmitEdit true && + git config git-p4.attemptRCSCleanup true && + "$GITP4" submit + ) && + ( + cd "$cli" && + p4 sync && + ! test -f kwdelfile.c + ) +' + +# If you add keywords in git of the form $Header$ then everything should +# work fine without any special handling. +test_expect_success 'Add keywords in git which match the default p4 values' ' + test_when_finished cleanup_git && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + echo "NewKW: \$Revision\$" >>kwfile1.c && + git add kwfile1.c && + git commit -m "Adding RCS keywords in git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.attemptRCSCleanup true && + "$GITP4" submit + ) && + ( + cd "$cli" && + p4 sync && + test -f kwfile1.c && + grep "NewKW.*Revision.*[0-9]" kwfile1.c + + ) +' + +# If you add keywords in git of the form $Header:#1$ then things will fail +# unless git-p4 takes steps to scrub the *git* commit. +# +test_expect_failure 'Add keywords in git which do not match the default p4 values' ' + test_when_finished cleanup_git && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + echo "NewKW2: \$Revision:1\$" >>kwfile1.c && + git add kwfile1.c && + git commit -m "Adding RCS keywords in git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.attemptRCSCleanup true && + "$GITP4" submit + ) && + ( + cd "$cli" && + p4 sync && + grep "NewKW2.*Revision.*[0-9]" kwfile1.c + + ) +' + +# Check that the existing merge conflict handling still works. +# Modify kwfile1.c in git, and delete in p4. We should be able +# to skip the git commit. +# +test_expect_success 'merge conflict handling still works' ' + test_when_finished cleanup_git && + ( + cd "$cli" && + echo "Hello:\$Id\$" >merge2.c && + echo "World" >>merge2.c && + p4 add -t ktext merge2.c && + p4 submit -d "add merge test file" + ) && + "$GITP4" clone --dest="$git" //depot && + ( + cd "$git" && + sed -e "/Hello/d" merge2.c >merge2.c.tmp && + mv merge2.c.tmp merge2.c && + git add merge2.c && + git commit -m "Modifying merge2.c" + ) && + ( + cd "$cli" && + p4 delete merge2.c && + p4 submit -d "remove merge test file" + ) && + ( + cd "$git" && + test -f merge2.c && + git config git-p4.skipSubmitEdit true && + git config git-p4.attemptRCSCleanup true && + !(echo "s" | "$GITP4" submit) && + git rebase --skip && + ! test -f merge2.c + ) +' + + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh new file mode 100644 index 0000000000..7b3b4bef30 --- /dev/null +++ b/t/test-lib-functions.sh @@ -0,0 +1,565 @@ +#!/bin/sh +# +# Copyright (c) 2005 Junio C Hamano +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/ . + +# The semantics of the editor variables are that of invoking +# sh -c "$EDITOR \"$@\"" files ... +# +# If our trash directory contains shell metacharacters, they will be +# interpreted if we just set $EDITOR directly, so do a little dance with +# environment variables to work around this. +# +# In particular, quoting isn't enough, as the path may contain the same quote +# that we're using. +test_set_editor () { + FAKE_EDITOR="$1" + export FAKE_EDITOR + EDITOR='"$FAKE_EDITOR"' + export EDITOR +} + +test_decode_color () { + awk ' + function name(n) { + if (n == 0) return "RESET"; + if (n == 1) return "BOLD"; + if (n == 30) return "BLACK"; + if (n == 31) return "RED"; + if (n == 32) return "GREEN"; + if (n == 33) return "YELLOW"; + if (n == 34) return "BLUE"; + if (n == 35) return "MAGENTA"; + if (n == 36) return "CYAN"; + if (n == 37) return "WHITE"; + if (n == 40) return "BLACK"; + if (n == 41) return "BRED"; + if (n == 42) return "BGREEN"; + if (n == 43) return "BYELLOW"; + if (n == 44) return "BBLUE"; + if (n == 45) return "BMAGENTA"; + if (n == 46) return "BCYAN"; + if (n == 47) return "BWHITE"; + } + { + while (match($0, /\033\[[0-9;]*m/) != 0) { + printf "%s<", substr($0, 1, RSTART-1); + codes = substr($0, RSTART+2, RLENGTH-3); + if (length(codes) == 0) + printf "%s", name(0) + else { + n = split(codes, ary, ";"); + sep = ""; + for (i = 1; i <= n; i++) { + printf "%s%s", sep, name(ary[i]); + sep = ";" + } + } + printf ">"; + $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1); + } + print + } + ' +} + +nul_to_q () { + perl -pe 'y/\000/Q/' +} + +q_to_nul () { + perl -pe 'y/Q/\000/' +} + +q_to_cr () { + tr Q '\015' +} + +q_to_tab () { + tr Q '\011' +} + +append_cr () { + sed -e 's/$/Q/' | tr Q '\015' +} + +remove_cr () { + tr '\015' Q | sed -e 's/Q$//' +} + +# In some bourne shell implementations, the "unset" builtin returns +# nonzero status when a variable to be unset was not set in the first +# place. +# +# Use sane_unset when that should not be considered an error. + +sane_unset () { + unset "$@" + return 0 +} + +test_tick () { + if test -z "${test_tick+set}" + then + test_tick=1112911993 + else + test_tick=$(($test_tick + 60)) + fi + GIT_COMMITTER_DATE="$test_tick -0700" + GIT_AUTHOR_DATE="$test_tick -0700" + export GIT_COMMITTER_DATE GIT_AUTHOR_DATE +} + +# Stop execution and start a shell. This is useful for debugging tests and +# only makes sense together with "-v". +# +# Be sure to remove all invocations of this command before submitting. + +test_pause () { + if test "$verbose" = t; then + "$SHELL_PATH" <&6 >&3 2>&4 + else + error >&5 "test_pause requires --verbose" + fi +} + +# Call test_commit with the arguments "<message> [<file> [<contents>]]" +# +# This will commit a file with the given contents and the given commit +# message. It will also add a tag with <message> as name. +# +# Both <file> and <contents> default to <message>. + +test_commit () { + file=${2:-"$1.t"} + echo "${3-$1}" > "$file" && + git add "$file" && + test_tick && + git commit -m "$1" && + git tag "$1" +} + +# Call test_merge with the arguments "<message> <commit>", where <commit> +# can be a tag pointing to the commit-to-merge. + +test_merge () { + test_tick && + git merge -m "$1" "$2" && + git tag "$1" +} + +# This function helps systems where core.filemode=false is set. +# Use it instead of plain 'chmod +x' to set or unset the executable bit +# of a file in the working directory and add it to the index. + +test_chmod () { + chmod "$@" && + git update-index --add "--chmod=$@" +} + +# Unset a configuration variable, but don't fail if it doesn't exist. +test_unconfig () { + git config --unset-all "$@" + config_status=$? + case "$config_status" in + 5) # ok, nothing to unset + config_status=0 + ;; + esac + return $config_status +} + +# Set git config, automatically unsetting it after the test is over. +test_config () { + test_when_finished "test_unconfig '$1'" && + git config "$@" +} + +test_config_global () { + test_when_finished "test_unconfig --global '$1'" && + git config --global "$@" +} + +write_script () { + { + echo "#!${2-"$SHELL_PATH"}" && + cat + } >"$1" && + chmod +x "$1" +} + +# Use test_set_prereq to tell that a particular prerequisite is available. +# The prerequisite can later be checked for in two ways: +# +# - Explicitly using test_have_prereq. +# +# - Implicitly by specifying the prerequisite tag in the calls to +# test_expect_{success,failure,code}. +# +# The single parameter is the prerequisite tag (a simple word, in all +# capital letters by convention). + +test_set_prereq () { + satisfied="$satisfied$1 " +} +satisfied=" " + +test_have_prereq () { + # prerequisites can be concatenated with ',' + save_IFS=$IFS + IFS=, + set -- $* + IFS=$save_IFS + + total_prereq=0 + ok_prereq=0 + missing_prereq= + + for prerequisite + do + total_prereq=$(($total_prereq + 1)) + case $satisfied in + *" $prerequisite "*) + ok_prereq=$(($ok_prereq + 1)) + ;; + *) + # Keep a list of missing prerequisites + if test -z "$missing_prereq" + then + missing_prereq=$prerequisite + else + missing_prereq="$prerequisite,$missing_prereq" + fi + esac + done + + test $total_prereq = $ok_prereq +} + +test_declared_prereq () { + case ",$test_prereq," in + *,$1,*) + return 0 + ;; + esac + return 1 +} + +test_expect_failure () { + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= + test "$#" = 2 || + error "bug in the test script: not 2 or 3 parameters to test-expect-failure" + export test_prereq + if ! test_skip "$@" + then + say >&3 "checking known breakage: $2" + if test_run_ "$2" expecting_failure + then + test_known_broken_ok_ "$1" + else + test_known_broken_failure_ "$1" + fi + fi + echo >&3 "" +} + +test_expect_success () { + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= + test "$#" = 2 || + error "bug in the test script: not 2 or 3 parameters to test-expect-success" + export test_prereq + if ! test_skip "$@" + then + say >&3 "expecting success: $2" + if test_run_ "$2" + then + test_ok_ "$1" + else + test_failure_ "$@" + fi + fi + echo >&3 "" +} + +# test_external runs external test scripts that provide continuous +# test output about their progress, and succeeds/fails on +# zero/non-zero exit code. It outputs the test output on stdout even +# in non-verbose mode, and announces the external script with "# run +# <n>: ..." before running it. When providing relative paths, keep in +# mind that all scripts run in "trash directory". +# Usage: test_external description command arguments... +# Example: test_external 'Perl API' perl ../path/to/test.pl +test_external () { + test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq= + test "$#" = 3 || + error >&5 "bug in the test script: not 3 or 4 parameters to test_external" + descr="$1" + shift + export test_prereq + if ! test_skip "$descr" "$@" + then + # Announce the script to reduce confusion about the + # test output that follows. + say_color "" "# run $test_count: $descr ($*)" + # Export TEST_DIRECTORY, TRASH_DIRECTORY and GIT_TEST_LONG + # to be able to use them in script + export TEST_DIRECTORY TRASH_DIRECTORY GIT_TEST_LONG + # Run command; redirect its stderr to &4 as in + # test_run_, but keep its stdout on our stdout even in + # non-verbose mode. + "$@" 2>&4 + if [ "$?" = 0 ] + then + if test $test_external_has_tap -eq 0; then + test_ok_ "$descr" + else + say_color "" "# test_external test $descr was ok" + test_success=$(($test_success + 1)) + fi + else + if test $test_external_has_tap -eq 0; then + test_failure_ "$descr" "$@" + else + say_color error "# test_external test $descr failed: $@" + test_failure=$(($test_failure + 1)) + fi + fi + fi +} + +# Like test_external, but in addition tests that the command generated +# no output on stderr. +test_external_without_stderr () { + # The temporary file has no (and must have no) security + # implications. + tmp=${TMPDIR:-/tmp} + stderr="$tmp/git-external-stderr.$$.tmp" + test_external "$@" 4> "$stderr" + [ -f "$stderr" ] || error "Internal error: $stderr disappeared." + descr="no stderr: $1" + shift + say >&3 "# expecting no stderr from previous command" + if [ ! -s "$stderr" ]; then + rm "$stderr" + + if test $test_external_has_tap -eq 0; then + test_ok_ "$descr" + else + say_color "" "# test_external_without_stderr test $descr was ok" + test_success=$(($test_success + 1)) + fi + else + if [ "$verbose" = t ]; then + output=`echo; echo "# Stderr is:"; cat "$stderr"` + else + output= + fi + # rm first in case test_failure exits. + rm "$stderr" + if test $test_external_has_tap -eq 0; then + test_failure_ "$descr" "$@" "$output" + else + say_color error "# test_external_without_stderr test $descr failed: $@: $output" + test_failure=$(($test_failure + 1)) + fi + fi +} + +# debugging-friendly alternatives to "test [-f|-d|-e]" +# The commands test the existence or non-existence of $1. $2 can be +# given to provide a more precise diagnosis. +test_path_is_file () { + if ! [ -f "$1" ] + then + echo "File $1 doesn't exist. $*" + false + fi +} + +test_path_is_dir () { + if ! [ -d "$1" ] + then + echo "Directory $1 doesn't exist. $*" + false + fi +} + +test_path_is_missing () { + if [ -e "$1" ] + then + echo "Path exists:" + ls -ld "$1" + if [ $# -ge 1 ]; then + echo "$*" + fi + false + fi +} + +# test_line_count checks that a file has the number of lines it +# ought to. For example: +# +# test_expect_success 'produce exactly one line of output' ' +# do something >output && +# test_line_count = 1 output +# ' +# +# is like "test $(wc -l <output) = 1" except that it passes the +# output through when the number of lines is wrong. + +test_line_count () { + if test $# != 3 + then + error "bug in the test script: not 3 parameters to test_line_count" + elif ! test $(wc -l <"$3") "$1" "$2" + then + echo "test_line_count: line count for $3 !$1 $2" + cat "$3" + return 1 + fi +} + +# This is not among top-level (test_expect_success | test_expect_failure) +# but is a prefix that can be used in the test script, like: +# +# test_expect_success 'complain and die' ' +# do something && +# do something else && +# test_must_fail git checkout ../outerspace +# ' +# +# Writing this as "! git checkout ../outerspace" is wrong, because +# the failure could be due to a segv. We want a controlled failure. + +test_must_fail () { + "$@" + exit_code=$? + if test $exit_code = 0; then + echo >&2 "test_must_fail: command succeeded: $*" + return 1 + elif test $exit_code -gt 129 -a $exit_code -le 192; then + echo >&2 "test_must_fail: died by signal: $*" + return 1 + elif test $exit_code = 127; then + echo >&2 "test_must_fail: command not found: $*" + return 1 + fi + return 0 +} + +# Similar to test_must_fail, but tolerates success, too. This is +# meant to be used in contexts like: +# +# test_expect_success 'some command works without configuration' ' +# test_might_fail git config --unset all.configuration && +# do something +# ' +# +# Writing "git config --unset all.configuration || :" would be wrong, +# because we want to notice if it fails due to segv. + +test_might_fail () { + "$@" + exit_code=$? + if test $exit_code -gt 129 -a $exit_code -le 192; then + echo >&2 "test_might_fail: died by signal: $*" + return 1 + elif test $exit_code = 127; then + echo >&2 "test_might_fail: command not found: $*" + return 1 + fi + return 0 +} + +# Similar to test_must_fail and test_might_fail, but check that a +# given command exited with a given exit code. Meant to be used as: +# +# test_expect_success 'Merge with d/f conflicts' ' +# test_expect_code 1 git merge "merge msg" B master +# ' + +test_expect_code () { + want_code=$1 + shift + "$@" + exit_code=$? + if test $exit_code = $want_code + then + return 0 + fi + + echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" + return 1 +} + +# test_cmp is a helper function to compare actual and expected output. +# You can use it like: +# +# test_expect_success 'foo works' ' +# echo expected >expected && +# foo >actual && +# test_cmp expected actual +# ' +# +# This could be written as either "cmp" or "diff -u", but: +# - cmp's output is not nearly as easy to read as diff -u +# - not all diff versions understand "-u" + +test_cmp() { + $GIT_TEST_CMP "$@" +} + +# This function can be used to schedule some commands to be run +# unconditionally at the end of the test to restore sanity: +# +# test_expect_success 'test core.capslock' ' +# git config core.capslock true && +# test_when_finished "git config --unset core.capslock" && +# hello world +# ' +# +# That would be roughly equivalent to +# +# test_expect_success 'test core.capslock' ' +# git config core.capslock true && +# hello world +# git config --unset core.capslock +# ' +# +# except that the greeting and config --unset must both succeed for +# the test to pass. +# +# Note that under --immediate mode, no clean-up is done to help diagnose +# what went wrong. + +test_when_finished () { + test_cleanup="{ $* + } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" +} + +# Most tests can use the created repository, but some may need to create more. +# Usage: test_create_repo <directory> +test_create_repo () { + test "$#" = 1 || + error "bug in the test script: not 1 parameter to test-create-repo" + repo="$1" + mkdir -p "$repo" + ( + cd "$repo" || error "Cannot setup test environment" + "$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 || + error "cannot run git init -- have you built things yet?" + mv .git/hooks .git/hooks-disabled + ) || exit +} diff --git a/t/test-lib.sh b/t/test-lib.sh index e28d5fdebe..d75766adaf 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -55,6 +55,7 @@ unset $(perl -e ' .*_TEST PROVE VALGRIND + PERF_AGGREGATING_LATER )); my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); print join("\n", @vars); @@ -98,6 +99,8 @@ _z40=0000000000000000000000000000000000000000 LF=' ' +export _x05 _x40 _z40 LF + # Each test should start with something like this, after copyright notices: # # test_description='Description of this test... @@ -223,248 +226,9 @@ die () { GIT_EXIT_OK= trap 'die' EXIT -# The semantics of the editor variables are that of invoking -# sh -c "$EDITOR \"$@\"" files ... -# -# If our trash directory contains shell metacharacters, they will be -# interpreted if we just set $EDITOR directly, so do a little dance with -# environment variables to work around this. -# -# In particular, quoting isn't enough, as the path may contain the same quote -# that we're using. -test_set_editor () { - FAKE_EDITOR="$1" - export FAKE_EDITOR - EDITOR='"$FAKE_EDITOR"' - export EDITOR -} - -test_decode_color () { - awk ' - function name(n) { - if (n == 0) return "RESET"; - if (n == 1) return "BOLD"; - if (n == 30) return "BLACK"; - if (n == 31) return "RED"; - if (n == 32) return "GREEN"; - if (n == 33) return "YELLOW"; - if (n == 34) return "BLUE"; - if (n == 35) return "MAGENTA"; - if (n == 36) return "CYAN"; - if (n == 37) return "WHITE"; - if (n == 40) return "BLACK"; - if (n == 41) return "BRED"; - if (n == 42) return "BGREEN"; - if (n == 43) return "BYELLOW"; - if (n == 44) return "BBLUE"; - if (n == 45) return "BMAGENTA"; - if (n == 46) return "BCYAN"; - if (n == 47) return "BWHITE"; - } - { - while (match($0, /\033\[[0-9;]*m/) != 0) { - printf "%s<", substr($0, 1, RSTART-1); - codes = substr($0, RSTART+2, RLENGTH-3); - if (length(codes) == 0) - printf "%s", name(0) - else { - n = split(codes, ary, ";"); - sep = ""; - for (i = 1; i <= n; i++) { - printf "%s%s", sep, name(ary[i]); - sep = ";" - } - } - printf ">"; - $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1); - } - print - } - ' -} - -nul_to_q () { - perl -pe 'y/\000/Q/' -} - -q_to_nul () { - perl -pe 'y/Q/\000/' -} - -q_to_cr () { - tr Q '\015' -} - -q_to_tab () { - tr Q '\011' -} - -append_cr () { - sed -e 's/$/Q/' | tr Q '\015' -} - -remove_cr () { - tr '\015' Q | sed -e 's/Q$//' -} - -# In some bourne shell implementations, the "unset" builtin returns -# nonzero status when a variable to be unset was not set in the first -# place. -# -# Use sane_unset when that should not be considered an error. - -sane_unset () { - unset "$@" - return 0 -} - -test_tick () { - if test -z "${test_tick+set}" - then - test_tick=1112911993 - else - test_tick=$(($test_tick + 60)) - fi - GIT_COMMITTER_DATE="$test_tick -0700" - GIT_AUTHOR_DATE="$test_tick -0700" - export GIT_COMMITTER_DATE GIT_AUTHOR_DATE -} - -# Stop execution and start a shell. This is useful for debugging tests and -# only makes sense together with "-v". -# -# Be sure to remove all invocations of this command before submitting. - -test_pause () { - if test "$verbose" = t; then - "$SHELL_PATH" <&6 >&3 2>&4 - else - error >&5 "test_pause requires --verbose" - fi -} - -# Call test_commit with the arguments "<message> [<file> [<contents>]]" -# -# This will commit a file with the given contents and the given commit -# message. It will also add a tag with <message> as name. -# -# Both <file> and <contents> default to <message>. - -test_commit () { - file=${2:-"$1.t"} - echo "${3-$1}" > "$file" && - git add "$file" && - test_tick && - git commit -m "$1" && - git tag "$1" -} - -# Call test_merge with the arguments "<message> <commit>", where <commit> -# can be a tag pointing to the commit-to-merge. - -test_merge () { - test_tick && - git merge -m "$1" "$2" && - git tag "$1" -} - -# This function helps systems where core.filemode=false is set. -# Use it instead of plain 'chmod +x' to set or unset the executable bit -# of a file in the working directory and add it to the index. - -test_chmod () { - chmod "$@" && - git update-index --add "--chmod=$@" -} - -# Unset a configuration variable, but don't fail if it doesn't exist. -test_unconfig () { - git config --unset-all "$@" - config_status=$? - case "$config_status" in - 5) # ok, nothing to unset - config_status=0 - ;; - esac - return $config_status -} - -# Set git config, automatically unsetting it after the test is over. -test_config () { - test_when_finished "test_unconfig '$1'" && - git config "$@" -} - - -test_config_global () { - test_when_finished "test_unconfig --global '$1'" && - git config --global "$@" -} - -write_script () { - { - echo "#!${2-"$SHELL_PATH"}" && - cat - } >"$1" && - chmod +x "$1" -} - -# Use test_set_prereq to tell that a particular prerequisite is available. -# The prerequisite can later be checked for in two ways: -# -# - Explicitly using test_have_prereq. -# -# - Implicitly by specifying the prerequisite tag in the calls to -# test_expect_{success,failure,code}. -# -# The single parameter is the prerequisite tag (a simple word, in all -# capital letters by convention). - -test_set_prereq () { - satisfied="$satisfied$1 " -} -satisfied=" " - -test_have_prereq () { - # prerequisites can be concatenated with ',' - save_IFS=$IFS - IFS=, - set -- $* - IFS=$save_IFS - - total_prereq=0 - ok_prereq=0 - missing_prereq= - - for prerequisite - do - total_prereq=$(($total_prereq + 1)) - case $satisfied in - *" $prerequisite "*) - ok_prereq=$(($ok_prereq + 1)) - ;; - *) - # Keep a list of missing prerequisites - if test -z "$missing_prereq" - then - missing_prereq=$prerequisite - else - missing_prereq="$prerequisite,$missing_prereq" - fi - esac - done - - test $total_prereq = $ok_prereq -} - -test_declared_prereq () { - case ",$test_prereq," in - *,$1,*) - return 0 - ;; - esac - return 1 -} +# The user-facing functions are loaded from a separate file so that +# test_perf subshells can have them too +. "${TEST_DIRECTORY:-.}"/test-lib-functions.sh # You are not expected to call test_ok_ and test_failure_ directly, use # the text_expect_* functions instead. @@ -552,318 +316,16 @@ test_skip () { esac } -test_expect_failure () { - test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= - test "$#" = 2 || - error "bug in the test script: not 2 or 3 parameters to test-expect-failure" - export test_prereq - if ! test_skip "$@" - then - say >&3 "checking known breakage: $2" - if test_run_ "$2" expecting_failure - then - test_known_broken_ok_ "$1" - else - test_known_broken_failure_ "$1" - fi - fi - echo >&3 "" -} - -test_expect_success () { - test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= - test "$#" = 2 || - error "bug in the test script: not 2 or 3 parameters to test-expect-success" - export test_prereq - if ! test_skip "$@" - then - say >&3 "expecting success: $2" - if test_run_ "$2" - then - test_ok_ "$1" - else - test_failure_ "$@" - fi - fi - echo >&3 "" -} - -# test_external runs external test scripts that provide continuous -# test output about their progress, and succeeds/fails on -# zero/non-zero exit code. It outputs the test output on stdout even -# in non-verbose mode, and announces the external script with "# run -# <n>: ..." before running it. When providing relative paths, keep in -# mind that all scripts run in "trash directory". -# Usage: test_external description command arguments... -# Example: test_external 'Perl API' perl ../path/to/test.pl -test_external () { - test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq= - test "$#" = 3 || - error >&5 "bug in the test script: not 3 or 4 parameters to test_external" - descr="$1" - shift - export test_prereq - if ! test_skip "$descr" "$@" - then - # Announce the script to reduce confusion about the - # test output that follows. - say_color "" "# run $test_count: $descr ($*)" - # Export TEST_DIRECTORY, TRASH_DIRECTORY and GIT_TEST_LONG - # to be able to use them in script - export TEST_DIRECTORY TRASH_DIRECTORY GIT_TEST_LONG - # Run command; redirect its stderr to &4 as in - # test_run_, but keep its stdout on our stdout even in - # non-verbose mode. - "$@" 2>&4 - if [ "$?" = 0 ] - then - if test $test_external_has_tap -eq 0; then - test_ok_ "$descr" - else - say_color "" "# test_external test $descr was ok" - test_success=$(($test_success + 1)) - fi - else - if test $test_external_has_tap -eq 0; then - test_failure_ "$descr" "$@" - else - say_color error "# test_external test $descr failed: $@" - test_failure=$(($test_failure + 1)) - fi - fi - fi -} - -# Like test_external, but in addition tests that the command generated -# no output on stderr. -test_external_without_stderr () { - # The temporary file has no (and must have no) security - # implications. - tmp=${TMPDIR:-/tmp} - stderr="$tmp/git-external-stderr.$$.tmp" - test_external "$@" 4> "$stderr" - [ -f "$stderr" ] || error "Internal error: $stderr disappeared." - descr="no stderr: $1" - shift - say >&3 "# expecting no stderr from previous command" - if [ ! -s "$stderr" ]; then - rm "$stderr" - - if test $test_external_has_tap -eq 0; then - test_ok_ "$descr" - else - say_color "" "# test_external_without_stderr test $descr was ok" - test_success=$(($test_success + 1)) - fi - else - if [ "$verbose" = t ]; then - output=`echo; echo "# Stderr is:"; cat "$stderr"` - else - output= - fi - # rm first in case test_failure exits. - rm "$stderr" - if test $test_external_has_tap -eq 0; then - test_failure_ "$descr" "$@" "$output" - else - say_color error "# test_external_without_stderr test $descr failed: $@: $output" - test_failure=$(($test_failure + 1)) - fi - fi -} - -# debugging-friendly alternatives to "test [-f|-d|-e]" -# The commands test the existence or non-existence of $1. $2 can be -# given to provide a more precise diagnosis. -test_path_is_file () { - if ! [ -f "$1" ] - then - echo "File $1 doesn't exist. $*" - false - fi -} - -test_path_is_dir () { - if ! [ -d "$1" ] - then - echo "Directory $1 doesn't exist. $*" - false - fi -} - -test_path_is_missing () { - if [ -e "$1" ] - then - echo "Path exists:" - ls -ld "$1" - if [ $# -ge 1 ]; then - echo "$*" - fi - false - fi -} - -# test_line_count checks that a file has the number of lines it -# ought to. For example: -# -# test_expect_success 'produce exactly one line of output' ' -# do something >output && -# test_line_count = 1 output -# ' -# -# is like "test $(wc -l <output) = 1" except that it passes the -# output through when the number of lines is wrong. - -test_line_count () { - if test $# != 3 - then - error "bug in the test script: not 3 parameters to test_line_count" - elif ! test $(wc -l <"$3") "$1" "$2" - then - echo "test_line_count: line count for $3 !$1 $2" - cat "$3" - return 1 - fi -} - -# This is not among top-level (test_expect_success | test_expect_failure) -# but is a prefix that can be used in the test script, like: -# -# test_expect_success 'complain and die' ' -# do something && -# do something else && -# test_must_fail git checkout ../outerspace -# ' -# -# Writing this as "! git checkout ../outerspace" is wrong, because -# the failure could be due to a segv. We want a controlled failure. - -test_must_fail () { - "$@" - exit_code=$? - if test $exit_code = 0; then - echo >&2 "test_must_fail: command succeeded: $*" - return 1 - elif test $exit_code -gt 129 -a $exit_code -le 192; then - echo >&2 "test_must_fail: died by signal: $*" - return 1 - elif test $exit_code = 127; then - echo >&2 "test_must_fail: command not found: $*" - return 1 - fi - return 0 -} - -# Similar to test_must_fail, but tolerates success, too. This is -# meant to be used in contexts like: -# -# test_expect_success 'some command works without configuration' ' -# test_might_fail git config --unset all.configuration && -# do something -# ' -# -# Writing "git config --unset all.configuration || :" would be wrong, -# because we want to notice if it fails due to segv. - -test_might_fail () { - "$@" - exit_code=$? - if test $exit_code -gt 129 -a $exit_code -le 192; then - echo >&2 "test_might_fail: died by signal: $*" - return 1 - elif test $exit_code = 127; then - echo >&2 "test_might_fail: command not found: $*" - return 1 - fi - return 0 -} - -# Similar to test_must_fail and test_might_fail, but check that a -# given command exited with a given exit code. Meant to be used as: -# -# test_expect_success 'Merge with d/f conflicts' ' -# test_expect_code 1 git merge "merge msg" B master -# ' - -test_expect_code () { - want_code=$1 - shift - "$@" - exit_code=$? - if test $exit_code = $want_code - then - return 0 - fi - - echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" - return 1 -} - -# test_cmp is a helper function to compare actual and expected output. -# You can use it like: -# -# test_expect_success 'foo works' ' -# echo expected >expected && -# foo >actual && -# test_cmp expected actual -# ' -# -# This could be written as either "cmp" or "diff -u", but: -# - cmp's output is not nearly as easy to read as diff -u -# - not all diff versions understand "-u" - -test_cmp() { - $GIT_TEST_CMP "$@" -} - -# This function can be used to schedule some commands to be run -# unconditionally at the end of the test to restore sanity: -# -# test_expect_success 'test core.capslock' ' -# git config core.capslock true && -# test_when_finished "git config --unset core.capslock" && -# hello world -# ' -# -# That would be roughly equivalent to -# -# test_expect_success 'test core.capslock' ' -# git config core.capslock true && -# hello world -# git config --unset core.capslock -# ' -# -# except that the greeting and config --unset must both succeed for -# the test to pass. -# -# Note that under --immediate mode, no clean-up is done to help diagnose -# what went wrong. - -test_when_finished () { - test_cleanup="{ $* - } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" -} - -# Most tests can use the created repository, but some may need to create more. -# Usage: test_create_repo <directory> -test_create_repo () { - test "$#" = 1 || - error "bug in the test script: not 1 parameter to test-create-repo" - repo="$1" - mkdir -p "$repo" - ( - cd "$repo" || error "Cannot setup test environment" - "$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 || - error "cannot run git init -- have you built things yet?" - mv .git/hooks .git/hooks-disabled - ) || exit +# stub; perf-lib overrides it +test_at_end_hook_ () { + : } test_done () { GIT_EXIT_OK=t if test -z "$HARNESS_ACTIVE"; then - test_results_dir="$TEST_DIRECTORY/test-results" + test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results" mkdir -p "$test_results_dir" test_results_path="$test_results_dir/${0%.sh}-$$.counts" @@ -902,6 +364,8 @@ test_done () { cd "$(dirname "$remove_trash")" && rm -rf "$(basename "$remove_trash")" + test_at_end_hook_ + exit 0 ;; *) @@ -924,6 +388,12 @@ then # itself. TEST_DIRECTORY=$(pwd) fi +if test -z "$TEST_OUTPUT_DIRECTORY" +then + # Similarly, override this to store the test-results subdir + # elsewhere + TEST_OUTPUT_DIRECTORY=$TEST_DIRECTORY +fi GIT_BUILD_DIR="$TEST_DIRECTORY"/.. if test -n "$valgrind" @@ -1059,7 +529,7 @@ test="trash directory.$(basename "$0" .sh)" test -n "$root" && test="$root/$test" case "$test" in /*) TRASH_DIRECTORY="$test" ;; - *) TRASH_DIRECTORY="$TEST_DIRECTORY/$test" ;; + *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$test" ;; esac test ! -z "$debug" || remove_trash=$TRASH_DIRECTORY rm -fr "$test" || { @@ -1071,7 +541,11 @@ rm -fr "$test" || { HOME="$TRASH_DIRECTORY" export HOME -test_create_repo "$test" +if test -z "$TEST_NO_CREATE_REPO"; then + test_create_repo "$test" +else + mkdir -p "$test" +fi # Use -P to resolve symlinks in our working directory so that the cwd # in subprocesses like git equals our $PWD (for pathname comparisons). cd -P "$test" || exit 1 |