diff options
Diffstat (limited to 't')
156 files changed, 1983 insertions, 895 deletions
diff --git a/t/Makefile b/t/Makefile index c7baefb7ea..73c6ec473d 100644 --- a/t/Makefile +++ b/t/Makefile @@ -11,16 +11,25 @@ SHELL_PATH ?= $(SHELL) PERL_PATH ?= /usr/bin/perl TAR ?= $(TAR) RM ?= rm -f +PROVE ?= prove +DEFAULT_TEST_TARGET ?= test # Shell quote; SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) T = $(wildcard t[0-9][0-9][0-9][0-9]-*.sh) TSVN = $(wildcard t91[0-9][0-9]-*.sh) +TGITWEB = $(wildcard t95[0-9][0-9]-*.sh) -all: pre-clean +all: $(DEFAULT_TEST_TARGET) + +test: pre-clean $(MAKE) aggregate-results-and-cleanup +prove: pre-clean + @echo "*** prove ***"; GIT_CONFIG=.git/config $(PROVE) --exec '$(SHELL_PATH_SQ)' $(GIT_PROVE_OPTS) $(T) :: $(GIT_TEST_OPTS) + $(MAKE) clean + $(T): @echo "*** $@ ***"; GIT_CONFIG=.git/config '$(SHELL_PATH_SQ)' $@ $(GIT_TEST_OPTS) @@ -46,6 +55,9 @@ full-svn-test: $(MAKE) $(TSVN) GIT_SVN_NO_OPTIMIZE_COMMITS=1 LC_ALL=C $(MAKE) $(TSVN) GIT_SVN_NO_OPTIMIZE_COMMITS=0 LC_ALL=en_US.UTF-8 +gitweb-test: + $(MAKE) $(TGITWEB) + valgrind: GIT_TEST_OPTS=--valgrind $(MAKE) @@ -50,6 +50,12 @@ prove and other harnesses come with a lot of useful options. The # Repeat until no more failures $ prove -j 15 --state=failed,save ./t[0-9]*.sh +You can give DEFAULT_TEST_TARGET=prove on the make command (or define it +in config.mak) to cause "make test" to run tests under prove. +GIT_PROVE_OPTS can be used to pass additional options, e.g. + + $ make DEFAULT_TEST_TARGET=prove GIT_PROVE_OPTS='--timer --jobs 16' test + You can also run each test individually from command line, like this: $ sh ./t3010-ls-files-killed-modified.sh @@ -259,14 +265,11 @@ Do: test ... That way all of the commands in your tests will succeed or fail. If - you must ignore the return value of something (e.g., the return - after unsetting a variable that was already unset is unportable) it's - best to indicate so explicitly with a semicolon: - - unset HLAGH; - git merge hla && - git push gh && - test ... + you must ignore the return value of something, consider using a + helper function (e.g. use sane_unset instead of unset, in order + to avoid unportable return value for unsetting a variable that was + already unset), or prepending the command with test_might_fail or + test_must_fail. - Check the test coverage for your tests. See the "Test coverage" below. @@ -395,13 +398,6 @@ library for your script to use. Like test_expect_success this function can optionally use a three argument invocation with a prerequisite as the first argument. - - test_expect_code [<prereq>] <code> <message> <script> - - Analogous to test_expect_success, but pass the test if it exits - with a given exit <code> - - test_expect_code 1 'Merge with d/f conflicts' 'git merge "merge msg" B master' - - test_debug <script> This takes a single argument, <script>, and evaluates it only @@ -482,6 +478,15 @@ library for your script to use. 'Perl API' \ "$PERL_PATH" "$TEST_DIRECTORY"/t9700/test.pl + - test_expect_code <exit-code> <command> + + Run a command and ensure that it exits with the given exit code. + For example: + + test_expect_success 'Merge with d/f conflicts' ' + test_expect_code 1 git merge "merge msg" B master + ' + - test_must_fail <git-command> Run a git command and ensure it fails in a controlled way. Use @@ -501,6 +506,10 @@ library for your script to use. <expected> file. This behaves like "cmp" but produces more helpful output when the test is run with "-v" option. + - test_line_count (= | -lt | -ge | ...) <length> <file> + + Check whether a file has the length it is expected to. + - test_path_is_file <file> [<diagnosis>] test_path_is_dir <dir> [<diagnosis>] test_path_is_missing <path> [<diagnosis>] diff --git a/t/annotate-tests.sh b/t/annotate-tests.sh index 141b60cdcb..212bd605b5 100644 --- a/t/annotate-tests.sh +++ b/t/annotate-tests.sh @@ -38,7 +38,7 @@ test_expect_success \ 'prepare reference tree' \ 'echo "1A quick brown fox jumps over the" >file && echo "lazy dog" >>file && - git add file + git add file && GIT_AUTHOR_NAME="A" git commit -a -m "Initial."' test_expect_success \ diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh index 81ef2a0969..b9bb95feaa 100644 --- a/t/gitweb-lib.sh +++ b/t/gitweb-lib.sh @@ -19,9 +19,9 @@ our \$site_name = '[localhost]'; our \$site_header = ''; our \$site_footer = ''; our \$home_text = 'indextext.html'; -our @stylesheets = ('file:///$TEST_DIRECTORY/../gitweb/static/gitweb.css'); -our \$logo = 'file:///$TEST_DIRECTORY/../gitweb/static/git-logo.png'; -our \$favicon = 'file:///$TEST_DIRECTORY/../gitweb/static/git-favicon.png'; +our @stylesheets = ('file:///$GIT_BUILD_DIR/gitweb/static/gitweb.css'); +our \$logo = 'file:///$GIT_BUILD_DIR/gitweb/static/git-logo.png'; +our \$favicon = 'file:///$GIT_BUILD_DIR/gitweb/static/git-favicon.png'; our \$projects_list = ''; our \$export_ok = ''; our \$strict_export = ''; @@ -32,17 +32,34 @@ EOF cat >.git/description <<EOF $0 test repository EOF + + # You can set the GITWEB_TEST_INSTALLED environment variable to + # the gitwebdir (the directory where gitweb is installed / deployed to) + # of an existing gitweb instalation to test that installation, + # or simply to pathname of installed gitweb script. + if test -n "$GITWEB_TEST_INSTALLED" ; then + if test -d $GITWEB_TEST_INSTALLED; then + SCRIPT_NAME="$GITWEB_TEST_INSTALLED/gitweb.cgi" + else + SCRIPT_NAME="$GITWEB_TEST_INSTALLED" + fi + test -f "$SCRIPT_NAME" || + error "Cannot find gitweb at $GITWEB_TEST_INSTALLED." + say "# Testing $SCRIPT_NAME" + else # normal case, use source version of gitweb + SCRIPT_NAME="$GIT_BUILD_DIR/gitweb/gitweb.perl" + fi + export SCRIPT_NAME } gitweb_run () { GATEWAY_INTERFACE='CGI/1.1' HTTP_ACCEPT='*/*' REQUEST_METHOD='GET' - SCRIPT_NAME="$TEST_DIRECTORY/../gitweb/gitweb.perl" QUERY_STRING=""$1"" PATH_INFO=""$2"" export GATEWAY_INTERFACE HTTP_ACCEPT REQUEST_METHOD \ - SCRIPT_NAME QUERY_STRING PATH_INFO + QUERY_STRING PATH_INFO GITWEB_CONFIG=$(pwd)/gitweb_config.perl export GITWEB_CONFIG @@ -80,9 +97,9 @@ if ! test_have_prereq PERL; then test_done fi -perl -MEncode -e 'decode_utf8("", Encode::FB_CROAK)' >/dev/null 2>&1 || { - skip_all='skipping gitweb tests, perl version is too old' - test_done +perl -MEncode -e '$e="";decode_utf8($e, Encode::FB_CROAK)' >/dev/null 2>&1 || { + skip_all='skipping gitweb tests, perl version is too old' + test_done } gitweb_init diff --git a/t/lib-terminal.sh b/t/lib-terminal.sh new file mode 100644 index 0000000000..c383b57ed9 --- /dev/null +++ b/t/lib-terminal.sh @@ -0,0 +1,19 @@ +#!/bin/sh + +test_expect_success 'set up terminal for tests' ' + if + test_have_prereq PERL && + "$PERL_PATH" "$TEST_DIRECTORY"/test-terminal.perl \ + sh -c "test -t 1 && test -t 2" + then + test_set_prereq TTY && + test_terminal () { + if ! test_declared_prereq TTY + then + echo >&4 "test_terminal: need to declare TTY prerequisite" + return 127 + fi + "$PERL_PATH" "$TEST_DIRECTORY"/test-terminal.perl "$@" + } + fi +' diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index f688bd3ef5..2f7002a5e5 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -130,22 +130,57 @@ test_expect_success 'tests clean up after themselves' ' test_when_finished clean=yes ' -cleaner=no -test_expect_code 1 'tests clean up even after a failure' ' - test_when_finished cleaner=yes && - (exit 1) -' - -if test $clean$cleaner != yesyes +if test $clean != yes then - say "bug in test framework: cleanup commands do not work reliably" + say "bug in test framework: basic cleanup command does not work reliably" exit 1 fi -test_expect_code 2 'failure to clean up causes the test to fail' ' - test_when_finished "(exit 2)" +test_expect_success 'tests clean up even on failures' " + mkdir failing-cleanup && + (cd failing-cleanup && + cat >failing-cleanup.sh <<EOF && +#!$SHELL_PATH + +test_description='Failing tests with cleanup commands' + +# Point to the t/test-lib.sh, which isn't in ../ as usual +TEST_DIRECTORY=\"$TEST_DIRECTORY\" +. \"\$TEST_DIRECTORY\"/test-lib.sh + +test_expect_success 'tests clean up even after a failure' ' + touch clean-after-failure && + test_when_finished rm clean-after-failure && + (exit 1) +' + +test_expect_success 'failure to clean up causes the test to fail' ' + test_when_finished \"(exit 2)\" ' +test_done +EOF + chmod +x failing-cleanup.sh && + test_must_fail ./failing-cleanup.sh >out 2>err && + ! test -s err && + ! test -f \"trash directory.failing-cleanup/clean-after-failure\" && +sed -e 's/Z$//' >expect <<\EOF && +not ok - 1 tests clean up even after a failure +# Z +# touch clean-after-failure && +# test_when_finished rm clean-after-failure && +# (exit 1) +# Z +not ok - 2 failure to clean up causes the test to fail +# Z +# test_when_finished \"(exit 2)\" +# Z +# failed 2 among 2 test(s) +1..2 +EOF + test_cmp expect out) +" + ################################################################ # Basics of the basics diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 7fe8883ae0..d44194c35f 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -25,7 +25,7 @@ check_config () { test_expect_success 'plain' ' ( - unset GIT_DIR GIT_WORK_TREE + sane_unset GIT_DIR GIT_WORK_TREE && mkdir plain && cd plain && git init @@ -35,7 +35,7 @@ test_expect_success 'plain' ' test_expect_success 'plain with GIT_WORK_TREE' ' if ( - unset GIT_DIR + sane_unset GIT_DIR && mkdir plain-wt && cd plain-wt && GIT_WORK_TREE=$(pwd) git init @@ -48,7 +48,7 @@ test_expect_success 'plain with GIT_WORK_TREE' ' test_expect_success 'plain bare' ' ( - unset GIT_DIR GIT_WORK_TREE GIT_CONFIG + sane_unset GIT_DIR GIT_WORK_TREE GIT_CONFIG && mkdir plain-bare-1 && cd plain-bare-1 && git --bare init @@ -58,7 +58,7 @@ test_expect_success 'plain bare' ' test_expect_success 'plain bare with GIT_WORK_TREE' ' if ( - unset GIT_DIR GIT_CONFIG + sane_unset GIT_DIR GIT_CONFIG && mkdir plain-bare-2 && cd plain-bare-2 && GIT_WORK_TREE=$(pwd) git --bare init @@ -72,7 +72,7 @@ test_expect_success 'plain bare with GIT_WORK_TREE' ' test_expect_success 'GIT_DIR bare' ' ( - unset GIT_CONFIG + sane_unset GIT_CONFIG && mkdir git-dir-bare.git && GIT_DIR=git-dir-bare.git git init ) && @@ -82,7 +82,7 @@ test_expect_success 'GIT_DIR bare' ' test_expect_success 'init --bare' ' ( - unset GIT_DIR GIT_WORK_TREE GIT_CONFIG + sane_unset GIT_DIR GIT_WORK_TREE GIT_CONFIG && mkdir init-bare.git && cd init-bare.git && git init --bare @@ -93,7 +93,7 @@ test_expect_success 'init --bare' ' test_expect_success 'GIT_DIR non-bare' ' ( - unset GIT_CONFIG + sane_unset GIT_CONFIG && mkdir non-bare && cd non-bare && GIT_DIR=.git git init @@ -104,7 +104,7 @@ test_expect_success 'GIT_DIR non-bare' ' test_expect_success 'GIT_DIR & GIT_WORK_TREE (1)' ' ( - unset GIT_CONFIG + sane_unset GIT_CONFIG && mkdir git-dir-wt-1.git && GIT_WORK_TREE=$(pwd) GIT_DIR=git-dir-wt-1.git git init ) && @@ -114,7 +114,7 @@ test_expect_success 'GIT_DIR & GIT_WORK_TREE (1)' ' test_expect_success 'GIT_DIR & GIT_WORK_TREE (2)' ' if ( - unset GIT_CONFIG + sane_unset GIT_CONFIG && mkdir git-dir-wt-2.git && GIT_WORK_TREE=$(pwd) GIT_DIR=git-dir-wt-2.git git --bare init ) @@ -127,7 +127,7 @@ test_expect_success 'GIT_DIR & GIT_WORK_TREE (2)' ' test_expect_success 'reinit' ' ( - unset GIT_CONFIG GIT_WORK_TREE GIT_CONFIG + sane_unset GIT_CONFIG GIT_WORK_TREE GIT_CONFIG && mkdir again && cd again && @@ -175,8 +175,8 @@ test_expect_success 'init with init.templatedir set' ' git config -f "$test_config" init.templatedir "${HOME}/templatedir-source" && mkdir templatedir-set && cd templatedir-set && - unset GIT_CONFIG_NOGLOBAL && - unset GIT_TEMPLATE_DIR && + sane_unset GIT_CONFIG_NOGLOBAL && + sane_unset GIT_TEMPLATE_DIR && NO_SET_GIT_TEMPLATE_DIR=t && export NO_SET_GIT_TEMPLATE_DIR && git init @@ -187,7 +187,7 @@ test_expect_success 'init with init.templatedir set' ' test_expect_success 'init --bare/--shared overrides system/global config' ' ( test_config="$HOME"/.gitconfig && - unset GIT_CONFIG_NOGLOBAL && + sane_unset GIT_CONFIG_NOGLOBAL && git config -f "$test_config" core.bare false && git config -f "$test_config" core.sharedRepository 0640 && mkdir init-bare-shared-override && @@ -202,7 +202,7 @@ test_expect_success 'init --bare/--shared overrides system/global config' ' test_expect_success 'init honors global core.sharedRepository' ' ( test_config="$HOME"/.gitconfig && - unset GIT_CONFIG_NOGLOBAL && + sane_unset GIT_CONFIG_NOGLOBAL && git config -f "$test_config" core.sharedRepository 0666 && mkdir shared-honor-global && cd shared-honor-global && diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh index de38c7f7aa..ebbc7554a7 100755 --- a/t/t0003-attributes.sh +++ b/t/t0003-attributes.sh @@ -36,6 +36,9 @@ test_expect_success 'setup' ' echo "d/* test=a/b/d/*" echo "d/yes notest" ) >a/b/.gitattributes + ( + echo "global test=global" + ) >"$HOME"/global-gitattributes ' @@ -57,9 +60,19 @@ test_expect_success 'attribute test' ' ' +test_expect_success 'core.attributesfile' ' + attr_check global unspecified && + git config core.attributesfile "$HOME/global-gitattributes" && + attr_check global global && + git config core.attributesfile "~/global-gitattributes" && + attr_check global global && + echo "global test=precedence" >> .gitattributes && + attr_check global precedence +' + test_expect_success 'attribute test: read paths from stdin' ' - cat <<EOF > expect + cat <<EOF > expect && f: test: f a/f: test: f a/c/f: test: f diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index 234a94f3e6..1a8f44c44c 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -439,7 +439,7 @@ test_expect_success 'checkout when deleting .gitattributes' ' git rm .gitattributes && echo "contentsQ" | q_to_cr > .file2 && git add .file2 && - git commit -m third + git commit -m third && git checkout master~1 && git checkout master && diff --git a/t/t0024-crlf-archive.sh b/t/t0024-crlf-archive.sh index c7d0324374..ec6c1b3f8a 100755 --- a/t/t0024-crlf-archive.sh +++ b/t/t0024-crlf-archive.sh @@ -7,7 +7,7 @@ UNZIP=${UNZIP:-unzip} test_expect_success setup ' - git config core.autocrlf true + git config core.autocrlf true && printf "CRLF line ending\r\nAnd another\r\n" > sample && git add sample && @@ -20,7 +20,7 @@ test_expect_success setup ' test_expect_success 'tar archive' ' git archive --format=tar HEAD | - ( mkdir untarred && cd untarred && "$TAR" -xf - ) + ( mkdir untarred && cd untarred && "$TAR" -xf - ) && test_cmp sample untarred/sample diff --git a/t/t0026-eol-config.sh b/t/t0026-eol-config.sh index f37ac8fa0b..fe0164be62 100755 --- a/t/t0026-eol-config.sh +++ b/t/t0026-eol-config.sh @@ -12,7 +12,7 @@ test_expect_success setup ' git config core.autocrlf false && - echo "one text" > .gitattributes + echo "one text" > .gitattributes && for w in Hello world how are you; do echo $w; done >one && for w in I am very very fine thank you; do echo $w; done >two && diff --git a/t/t0050-filesystem.sh b/t/t0050-filesystem.sh index 41df6bcf27..057c97c49f 100755 --- a/t/t0050-filesystem.sh +++ b/t/t0050-filesystem.sh @@ -12,14 +12,14 @@ unibad= no_symlinks= test_expect_success 'see what we expect' ' - test_case=test_expect_success - test_unicode=test_expect_success + test_case=test_expect_success && + test_unicode=test_expect_success && mkdir junk && echo good >junk/CamelCase && echo bad >junk/camelcase && if test "$(cat junk/CamelCase)" != good then - test_case=test_expect_failure + test_case=test_expect_failure && case_insensitive=t fi && rm -fr junk && @@ -27,7 +27,7 @@ test_expect_success 'see what we expect' ' >junk/"$auml" && case "$(cd junk && echo *)" in "$aumlcdiar") - test_unicode=test_expect_failure + test_unicode=test_expect_failure && unibad=t ;; *) ;; @@ -36,7 +36,7 @@ test_expect_success 'see what we expect' ' { ln -s x y 2> /dev/null && test -h y 2> /dev/null || - no_symlinks=1 + no_symlinks=1 && rm -f y } ' @@ -128,7 +128,7 @@ test_expect_success "setup unicode normalization tests" ' cd unicode && touch "$aumlcdiar" && git add "$aumlcdiar" && - git commit -m initial + git commit -m initial && git tag initial && git checkout -b topic && git mv $aumlcdiar tmp && diff --git a/t/t1000-read-tree-m-3way.sh b/t/t1000-read-tree-m-3way.sh index 4f171722d9..ca8a4098fa 100755 --- a/t/t1000-read-tree-m-3way.sh +++ b/t/t1000-read-tree-m-3way.sh @@ -309,7 +309,7 @@ test_expect_success \ test_expect_success \ '6 - must not exist in O && !A && !B case' " rm -f .git/index DD && - echo DD >DD + echo DD >DD && git update-index --add DD && test_must_fail git read-tree -m $tree_O $tree_A $tree_B " diff --git a/t/t1001-read-tree-m-2way.sh b/t/t1001-read-tree-m-2way.sh index 93ca84f9e6..680d992f22 100755 --- a/t/t1001-read-tree-m-2way.sh +++ b/t/t1001-read-tree-m-2way.sh @@ -98,8 +98,8 @@ test_expect_success \ git checkout-index -u -f -q -a && git update-index --add yomin && read_tree_twoway $treeH $treeM && - git ls-files --stage >4.out || return 1 - git diff --no-index M.out 4.out >4diff.out + git ls-files --stage >4.out && + test_must_fail git diff --no-index M.out 4.out >4diff.out && compare_change 4diff.out expected && check_cache_at yomin clean' @@ -112,8 +112,8 @@ test_expect_success \ git update-index --add yomin && echo yomin yomin >yomin && read_tree_twoway $treeH $treeM && - git ls-files --stage >5.out || return 1 - git diff --no-index M.out 5.out >5diff.out + git ls-files --stage >5.out && + test_must_fail git diff --no-index M.out 5.out >5diff.out && compare_change 5diff.out expected && check_cache_at yomin dirty' @@ -213,8 +213,8 @@ test_expect_success \ echo nitfol nitfol >nitfol && git update-index --add nitfol && read_tree_twoway $treeH $treeM && - git ls-files --stage >14.out || return 1 - git diff --no-index M.out 14.out >14diff.out + git ls-files --stage >14.out && + test_must_fail git diff --no-index M.out 14.out >14diff.out && compare_change 14diff.out expected && check_cache_at nitfol clean' @@ -227,8 +227,8 @@ test_expect_success \ git update-index --add nitfol && echo nitfol nitfol nitfol >nitfol && read_tree_twoway $treeH $treeM && - git ls-files --stage >15.out || return 1 - git diff --no-index M.out 15.out >15diff.out + git ls-files --stage >15.out && + test_must_fail git diff --no-index M.out 15.out >15diff.out && compare_change 15diff.out expected && check_cache_at nitfol dirty' @@ -377,7 +377,7 @@ test_expect_success \ git ls-files --stage >treeM.out && rm -f a && - mkdir a + mkdir a && : >a/b && git update-index --add --remove a a/b && treeH=`git write-tree` && @@ -394,7 +394,7 @@ test_expect_success '-m references the correct modified tree' ' echo >file-a && echo >file-b && git add file-a file-b && - git commit -a -m "test for correct modified tree" + git commit -a -m "test for correct modified tree" && git branch initial-mod && echo b >file-b && git commit -a -m "B" && diff --git a/t/t1002-read-tree-m-u-2way.sh b/t/t1002-read-tree-m-u-2way.sh index 0241329a08..a4a17e0017 100755 --- a/t/t1002-read-tree-m-u-2way.sh +++ b/t/t1002-read-tree-m-u-2way.sh @@ -205,8 +205,8 @@ test_expect_success \ echo nitfol nitfol >nitfol && git update-index --add nitfol && git read-tree -m -u $treeH $treeM && - git ls-files --stage >14.out || return 1 - git diff -U0 --no-index M.out 14.out >14diff.out + git ls-files --stage >14.out && + test_must_fail git diff -U0 --no-index M.out 14.out >14diff.out && compare_change 14diff.out expected && sum bozbar frotz >actual14.sum && grep -v nitfol M.sum > expected14.sum && @@ -226,8 +226,8 @@ test_expect_success \ git update-index --add nitfol && echo nitfol nitfol nitfol >nitfol && git read-tree -m -u $treeH $treeM && - git ls-files --stage >15.out || return 1 - git diff -U0 --no-index M.out 15.out >15diff.out + git ls-files --stage >15.out && + test_must_fail git diff -U0 --no-index M.out 15.out >15diff.out && compare_change 15diff.out expected && check_cache_at nitfol dirty && sum bozbar frotz >actual15.sum && @@ -314,7 +314,7 @@ test_expect_success \ # Also make sure we did not break DF vs DF/DF case. test_expect_success \ 'DF vs DF/DF case setup.' \ - 'rm -f .git/index + 'rm -f .git/index && echo DF >DF && git update-index --add DF && treeDF=`git write-tree` && diff --git a/t/t1011-read-tree-sparse-checkout.sh b/t/t1011-read-tree-sparse-checkout.sh index 9a07de1a5b..0ef11bccb4 100755 --- a/t/t1011-read-tree-sparse-checkout.sh +++ b/t/t1011-read-tree-sparse-checkout.sh @@ -17,17 +17,19 @@ test_expect_success 'setup' ' cat >expected <<-\EOF && 100644 77f0ba1734ed79d12881f81b36ee134de6a3327b 0 init.t 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 sub/added + 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 subsub/added EOF cat >expected.swt <<-\EOF && H init.t H sub/added + H subsub/added EOF test_commit init && echo modified >>init.t && - mkdir sub && - touch sub/added && - git add init.t sub/added && + mkdir sub subsub && + touch sub/added subsub/added && + git add init.t sub/added subsub/added && git commit -m "modified and added" && git tag top && git rm sub/added && @@ -47,7 +49,7 @@ test_expect_success 'read-tree without .git/info/sparse-checkout' ' ' test_expect_success 'read-tree with .git/info/sparse-checkout but disabled' ' - echo >.git/info/sparse-checkout + echo >.git/info/sparse-checkout && git read-tree -m -u HEAD && git ls-files -t >result && test_cmp expected.swt result && @@ -81,6 +83,7 @@ test_expect_success 'match directories with trailing slash' ' cat >expected.swt-noinit <<-\EOF && S init.t H sub/added + S subsub/added EOF echo sub/ > .git/info/sparse-checkout && @@ -105,6 +108,7 @@ test_expect_success 'checkout area changes' ' cat >expected.swt-nosub <<-\EOF && H init.t S sub/added + S subsub/added EOF echo init.t >.git/info/sparse-checkout && diff --git a/t/t1200-tutorial.sh b/t/t1200-tutorial.sh index ab55eda158..bfa2c2190d 100755 --- a/t/t1200-tutorial.sh +++ b/t/t1200-tutorial.sh @@ -42,7 +42,7 @@ test_expect_success 'git diff' ' ' test_expect_success 'tree' ' - tree=$(git write-tree 2>/dev/null) + tree=$(git write-tree 2>/dev/null) && test 8988da15d077d4829fc51d8544c097def6644dbb = $tree ' diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 074f2f2e3e..d0e55465ff 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -289,6 +289,14 @@ test_expect_success 'working --list' \ 'git config --list > output && cmp output expect' cat > expect << EOF +EOF + +test_expect_success '--list without repo produces empty output' ' + git --git-dir=nonexistent config --list >output && + test_cmp expect output +' + +cat > expect << EOF beta.noindent sillyValue nextsection.nonewline wow2 for me EOF @@ -701,13 +709,13 @@ cat >expect <<\EOF trailingtilde = foo~ EOF -test_expect_success 'set --path' ' +test_expect_success NOT_MINGW 'set --path' ' git config --path path.home "~/" && git config --path path.normal "/dev/null" && git config --path path.trailingtilde "foo~" && test_cmp expect .git/config' -if test "${HOME+set}" +if test_have_prereq NOT_MINGW && test "${HOME+set}" then test_set_prereq HOMEVAR fi @@ -730,7 +738,7 @@ cat >expect <<\EOF foo~ EOF -test_expect_success 'get --path copes with unset $HOME' ' +test_expect_success NOT_MINGW 'get --path copes with unset $HOME' ' ( unset HOME; test_must_fail git config --get --path path.home \ @@ -836,6 +844,27 @@ test_expect_success SYMLINKS 'symlinked configuration' ' ' +test_expect_success 'nonexistent configuration' ' + ( + GIT_CONFIG=doesnotexist && + export GIT_CONFIG && + test_must_fail git config --list && + test_must_fail git config test.xyzzy + ) +' + +test_expect_success SYMLINKS 'symlink to nonexistent configuration' ' + ln -s doesnotexist linktonada && + ln -s linktonada linktolinktonada && + ( + GIT_CONFIG=linktonada && + export GIT_CONFIG && + test_must_fail git config --list && + GIT_CONFIG=linktolinktonada && + test_must_fail git config --list + ) +' + test_expect_success 'check split_cmdline return' " git config alias.split-cmdline-fix 'echo \"' && test_must_fail git split-cmdline-fix && diff --git a/t/t1302-repo-version.sh b/t/t1302-repo-version.sh index a6bf1bf4d6..0e47662406 100755 --- a/t/t1302-repo-version.sh +++ b/t/t1302-repo-version.sh @@ -39,7 +39,7 @@ test_expect_success 'gitdir selection on unsupported repo' ' ( cd test2 && git config core.repositoryformatversion >../actual - ) + ) && test_cmp expect actual ' diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index 54ba3df95f..ff747f8229 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -52,9 +52,8 @@ rm -f .git/$m test_expect_success \ "fail to create $n" \ - "touch .git/$n_dir - git update-ref $n $A >out 2>err"' - test $? != 0' + "touch .git/$n_dir && + test_must_fail git update-ref $n $A >out 2>err" rm -f .git/$n_dir out err test_expect_success \ @@ -185,55 +184,55 @@ gd="Thu, 26 May 2005 18:33:00 -0500" ld="Thu, 26 May 2005 18:43:00 -0500" test_expect_success \ 'Query "master@{May 25 2005}" (before history)' \ - 'rm -f o e + 'rm -f o e && git rev-parse --verify "master@{May 25 2005}" >o 2>e && test '"$C"' = $(cat o) && test "warning: Log for '\'master\'' only goes back to $ed." = "$(cat e)"' test_expect_success \ "Query master@{2005-05-25} (before history)" \ - 'rm -f o e + 'rm -f o e && git rev-parse --verify master@{2005-05-25} >o 2>e && test '"$C"' = $(cat o) && echo test "warning: Log for '\'master\'' only goes back to $ed." = "$(cat e)"' test_expect_success \ 'Query "master@{May 26 2005 23:31:59}" (1 second before history)' \ - 'rm -f o e + 'rm -f o e && git rev-parse --verify "master@{May 26 2005 23:31:59}" >o 2>e && test '"$C"' = $(cat o) && test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)"' test_expect_success \ 'Query "master@{May 26 2005 23:32:00}" (exactly history start)' \ - 'rm -f o e + 'rm -f o e && git rev-parse --verify "master@{May 26 2005 23:32:00}" >o 2>e && test '"$C"' = $(cat o) && test "" = "$(cat e)"' test_expect_success \ 'Query "master@{May 26 2005 23:32:30}" (first non-creation change)' \ - 'rm -f o e + 'rm -f o e && git rev-parse --verify "master@{May 26 2005 23:32:30}" >o 2>e && test '"$A"' = $(cat o) && test "" = "$(cat e)"' test_expect_success \ 'Query "master@{2005-05-26 23:33:01}" (middle of history with gap)' \ - 'rm -f o e + 'rm -f o e && git rev-parse --verify "master@{2005-05-26 23:33:01}" >o 2>e && test '"$B"' = $(cat o) && test "warning: Log .git/logs/'"$m has gap after $gd"'." = "$(cat e)"' test_expect_success \ 'Query "master@{2005-05-26 23:38:00}" (middle of history)' \ - 'rm -f o e + 'rm -f o e && git rev-parse --verify "master@{2005-05-26 23:38:00}" >o 2>e && test '"$Z"' = $(cat o) && test "" = "$(cat e)"' test_expect_success \ 'Query "master@{2005-05-26 23:43:00}" (exact end of history)' \ - 'rm -f o e + 'rm -f o e && git rev-parse --verify "master@{2005-05-26 23:43:00}" >o 2>e && test '"$E"' = $(cat o) && test "" = "$(cat e)"' test_expect_success \ 'Query "master@{2005-05-28}" (past end of history)' \ - 'rm -f o e + 'rm -f o e && git rev-parse --verify "master@{2005-05-28}" >o 2>e && test '"$D"' = $(cat o) && test "warning: Log .git/logs/'"$m unexpectedly ended on $ld"'." = "$(cat e)"' @@ -247,7 +246,7 @@ test_expect_success \ git add F && GIT_AUTHOR_DATE="2005-05-26 23:30" \ GIT_COMMITTER_DATE="2005-05-26 23:30" git commit -m add -a && - h_TEST=$(git rev-parse --verify HEAD) + h_TEST=$(git rev-parse --verify HEAD) && echo The other day this did not work. >M && echo And then Bob told me how to fix it. >>M && echo OTHER >F && diff --git a/t/t1401-symbolic-ref.sh b/t/t1401-symbolic-ref.sh index 7fa5f5b22a..2c96551ed0 100755 --- a/t/t1401-symbolic-ref.sh +++ b/t/t1401-symbolic-ref.sh @@ -28,7 +28,7 @@ test_expect_success 'symbolic-ref refuses non-ref for HEAD' ' reset_to_sane test_expect_success 'symbolic-ref refuses bare sha1' ' - echo content >file && git add file && git commit -m one + echo content >file && git add file && git commit -m one && test_must_fail git symbolic-ref HEAD `git rev-parse HEAD` ' reset_to_sane diff --git a/t/t1402-check-ref-format.sh b/t/t1402-check-ref-format.sh index 782e75d000..1b0f82fa4c 100755 --- a/t/t1402-check-ref-format.sh +++ b/t/t1402-check-ref-format.sh @@ -32,7 +32,7 @@ test_expect_success "check-ref-format --branch @{-1}" ' T=$(git write-tree) && sha1=$(echo A | git commit-tree $T) && git update-ref refs/heads/master $sha1 && - git update-ref refs/remotes/origin/master $sha1 + git update-ref refs/remotes/origin/master $sha1 && git checkout master && git checkout origin/master && git checkout master && @@ -47,7 +47,7 @@ test_expect_success 'check-ref-format --branch from subdir' ' T=$(git write-tree) && sha1=$(echo A | git commit-tree $T) && git update-ref refs/heads/master $sha1 && - git update-ref refs/remotes/origin/master $sha1 + git update-ref refs/remotes/origin/master $sha1 && git checkout master && git checkout origin/master && git checkout master && diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 25046c4208..252fc82837 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -186,8 +186,8 @@ test_expect_success 'delete' ' test_tick && git commit -m tiger C && - HEAD_entry_count=$(git reflog | wc -l) - master_entry_count=$(git reflog show master | wc -l) + HEAD_entry_count=$(git reflog | wc -l) && + master_entry_count=$(git reflog show master | wc -l) && test $HEAD_entry_count = 5 && test $master_entry_count = 5 && @@ -199,13 +199,13 @@ test_expect_success 'delete' ' test $HEAD_entry_count = $(git reflog | wc -l) && ! grep ox < output && - master_entry_count=$(wc -l < output) + master_entry_count=$(wc -l < output) && git reflog delete HEAD@{1} && test $(($HEAD_entry_count -1)) = $(git reflog | wc -l) && test $master_entry_count = $(git reflog show master | wc -l) && - HEAD_entry_count=$(git reflog | wc -l) + HEAD_entry_count=$(git reflog | wc -l) && git reflog delete master@{07.04.2005.15:15:00.-0700} && git reflog show master > output && diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 1be415e334..bb01d5ab8f 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -61,7 +61,7 @@ test_expect_success 'object with bad sha1' ' sha=$(echo blob | git hash-object -w --stdin) && old=$(echo $sha | sed "s+^..+&/+") && new=$(dirname $old)/ffffffffffffffffffffffffffffffffffffff && - sha="$(dirname $new)$(basename $new)" + sha="$(dirname $new)$(basename $new)" && mv .git/objects/$old .git/objects/$new && test_when_finished "remove_object $sha" && git update-index --add --cacheinfo 100644 $sha foo && @@ -111,7 +111,7 @@ test_expect_success 'email with embedded > is not okay' ' ' test_expect_success 'tag pointing to nonexistent' ' - cat >invalid-tag <<-\EOF + cat >invalid-tag <<-\EOF && object ffffffffffffffffffffffffffffffffffffffff type commit tag invalid diff --git a/t/t1502-rev-parse-parseopt.sh b/t/t1502-rev-parse-parseopt.sh index b3195c4707..1efd7f76dd 100755 --- a/t/t1502-rev-parse-parseopt.sh +++ b/t/t1502-rev-parse-parseopt.sh @@ -40,7 +40,7 @@ extra1 line above used to cause a segfault but no longer does EOF test_expect_success 'test --parseopt help output' ' - git rev-parse --parseopt -- -h > output < optionspec + test_expect_code 129 git rev-parse --parseopt -- -h > output < optionspec && test_cmp expect output ' diff --git a/t/t1504-ceiling-dirs.sh b/t/t1504-ceiling-dirs.sh index df5ad8c686..cce87a5ab5 100755 --- a/t/t1504-ceiling-dirs.sh +++ b/t/t1504-ceiling-dirs.sh @@ -9,8 +9,9 @@ test_prefix() { } test_fail() { - test_expect_code 128 "$1: prefix" \ - "git rev-parse --show-prefix" + test_expect_success "$1: prefix" ' + test_expect_code 128 git rev-parse --show-prefix + ' } TRASH_ROOT="$PWD" diff --git a/t/t1507-rev-parse-upstream.sh b/t/t1507-rev-parse-upstream.sh index 8c8dfdaf9f..a4555510c3 100755 --- a/t/t1507-rev-parse-upstream.sh +++ b/t/t1507-rev-parse-upstream.sh @@ -85,7 +85,7 @@ test_expect_success 'merge my-side@{u} records the correct name' ' git branch -t new my-side@{u} && git merge -s ours new@{u} && git show -s --pretty=format:%s >actual && - echo "Merge remote branch ${sq}origin/side${sq}" >expect && + echo "Merge remote-tracking branch ${sq}origin/side${sq}" >expect && test_cmp expect actual ) ' diff --git a/t/t2007-checkout-symlink.sh b/t/t2007-checkout-symlink.sh index a74ee227b8..e6f59f1914 100755 --- a/t/t2007-checkout-symlink.sh +++ b/t/t2007-checkout-symlink.sh @@ -17,7 +17,7 @@ test_expect_success SYMLINKS setup ' git branch side && echo goodbye >nitfol && - git add nitfol + git add nitfol && test_tick && git commit -m "master adds file nitfol" && diff --git a/t/t2016-checkout-patch.sh b/t/t2016-checkout-patch.sh index a463b13b27..9cd0ac4ba3 100755 --- a/t/t2016-checkout-patch.sh +++ b/t/t2016-checkout-patch.sh @@ -32,7 +32,7 @@ test_expect_success PERL 'git checkout -p' ' ' test_expect_success PERL 'git checkout -p with staged changes' ' - set_state dir/foo work index + set_state dir/foo work index && (echo n; echo y) | git checkout -p && verify_saved_state bar && verify_state dir/foo index index diff --git a/t/t2017-checkout-orphan.sh b/t/t2017-checkout-orphan.sh index 2d2f63f22e..0e3b8582f2 100755 --- a/t/t2017-checkout-orphan.sh +++ b/t/t2017-checkout-orphan.sh @@ -14,7 +14,7 @@ TEST_FILE=foo test_expect_success 'Setup' ' echo "Initial" >"$TEST_FILE" && git add "$TEST_FILE" && - git commit -m "First Commit" + git commit -m "First Commit" && test_tick && echo "State 1" >>"$TEST_FILE" && git add "$TEST_FILE" && diff --git a/t/t2050-git-dir-relative.sh b/t/t2050-git-dir-relative.sh index b7131d8c08..21f4659a9d 100755 --- a/t/t2050-git-dir-relative.sh +++ b/t/t2050-git-dir-relative.sh @@ -26,7 +26,7 @@ chmod +x .git/hooks/post-commit' test_expect_success 'post-commit hook used ordinarily' ' echo initial >top && -git add top +git add top && git commit -m initial && test -r "${COMMIT_FILE}" ' @@ -45,7 +45,7 @@ test -r "${COMMIT_FILE}" rm -rf "${COMMIT_FILE}" test_expect_success 'post-commit-hook from sub dir' ' -echo changed again >top +echo changed again >top && cd subdir && git --git-dir .git --work-tree .. add ../top && git --git-dir .git --work-tree .. commit -m subcommit && diff --git a/t/t2101-update-index-reupdate.sh b/t/t2101-update-index-reupdate.sh index 76ad7c344c..c8bce8c2e4 100755 --- a/t/t2101-update-index-reupdate.sh +++ b/t/t2101-update-index-reupdate.sh @@ -51,7 +51,7 @@ test_expect_success 'update-index again' \ echo hello world >dir1/file3 && echo goodbye people >file2 && git update-index --add file2 dir1/file3 && - echo hello everybody >file2 + echo hello everybody >file2 && echo happy >dir1/file3 && git update-index --again && git ls-files -s >current && diff --git a/t/t2200-add-update.sh b/t/t2200-add-update.sh index 2ad2819a34..0692427cb6 100755 --- a/t/t2200-add-update.sh +++ b/t/t2200-add-update.sh @@ -25,7 +25,7 @@ test_expect_success setup ' echo initial >dir1/sub2 && echo initial >dir2/sub3 && git add check dir1 dir2 top foo && - test_tick + test_tick && git commit -m initial && echo changed >check && diff --git a/t/t3001-ls-files-others-exclude.sh b/t/t3001-ls-files-others-exclude.sh index 6d2f2b67ee..c8fe978267 100755 --- a/t/t3001-ls-files-others-exclude.sh +++ b/t/t3001-ls-files-others-exclude.sh @@ -156,7 +156,7 @@ test_expect_success 'trailing slash in exclude allows directory match (2)' ' test_expect_success 'trailing slash in exclude forces directory match (1)' ' - >two + >two && git ls-files --others --exclude=two/ >output && grep "^two" output diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index e66e550b24..20d4f11dbe 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -544,7 +544,7 @@ test_expect_success 'reset and bind merge' ' echo "100644 $o0 0 c" echo "100644 $o1 0 d/e" ) >expected && - test_cmp expected actual + test_cmp expected actual && git read-tree --prefix=z/ master && git ls-files -s >actual && diff --git a/t/t3032-merge-recursive-options.sh b/t/t3032-merge-recursive-options.sh new file mode 100755 index 0000000000..2293797553 --- /dev/null +++ b/t/t3032-merge-recursive-options.sh @@ -0,0 +1,186 @@ +#!/bin/sh + +test_description='merge-recursive options + +* [master] Clarify + ! [remote] Remove cruft +-- + + [remote] Remove cruft +* [master] Clarify +*+ [remote^] Initial revision +* ok 1: setup +' + +. ./test-lib.sh + +test_expect_success 'setup' ' + conflict_hunks () { + sed -n -e " + /^<<<</ b inconflict + b + : inconflict + p + /^>>>>/ b + n + b inconflict + " "$@" + } && + + cat <<-\EOF >text.txt && + Hope, he says, cherishes the soul of him who lives in + justice and holiness and is the nurse of his age and the + companion of his journey;--hope which is mightiest to sway + the restless soul of man. + + How admirable are his words! And the great blessing of riches, I do + not say to every man, but to a good man, is, that he has had no + occasion to deceive or to defraud others, either intentionally or + unintentionally; and when he departs to the world below he is not in + any apprehension about offerings due to the gods or debts which he owes + to men. Now to this peace of mind the possession of wealth greatly + contributes; and therefore I say, that, setting one thing against + another, of the many advantages which wealth has to give, to a man of + sense this is in my opinion the greatest. + + Well said, Cephalus, I replied; but as concerning justice, what is + it?--to speak the truth and to pay your debts--no more than this? And + even to this are there not exceptions? Suppose that a friend when in + his right mind has deposited arms with me and he asks for them when he + is not in his right mind, ought I to give them back to him? No one + would say that I ought or that I should be right in doing so, any more + than they would say that I ought always to speak the truth to one who + is in his condition. + + You are quite right, he replied. + + But then, I said, speaking the truth and paying your debts is not a + correct definition of justice. + + CEPHALUS - SOCRATES - POLEMARCHUS + + Quite correct, Socrates, if Simonides is to be believed, said + Polemarchus interposing. + + I fear, said Cephalus, that I must go now, for I have to look after the + sacrifices, and I hand over the argument to Polemarchus and the company. + EOF + git add text.txt && + test_tick && + git commit -m "Initial revision" && + + git checkout -b remote && + sed -e " + s/\. /\. /g + s/[?] /? /g + s/ / /g + s/--/---/g + s/but as concerning/but as con cerning/ + /CEPHALUS - SOCRATES - POLEMARCHUS/ d + " text.txt >text.txt+ && + mv text.txt+ text.txt && + git commit -a -m "Remove cruft" && + + git checkout master && + sed -e " + s/\(not in his right mind\),\(.*\)/\1;\2Q/ + s/Quite correct\(.*\)/It is too correct\1Q/ + s/unintentionally/un intentionally/ + /un intentionally/ s/$/Q/ + s/Polemarchus interposing./Polemarchus, interposing.Q/ + /justice and holiness/ s/$/Q/ + /pay your debts/ s/$/Q/ + " text.txt | q_to_cr >text.txt+ && + mv text.txt+ text.txt && + git commit -a -m "Clarify" && + git show-branch --all +' + +test_expect_success 'naive merge fails' ' + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive HEAD^ -- HEAD remote && + test_must_fail git update-index --refresh && + grep "<<<<<<" text.txt +' + +test_expect_success '--ignore-space-change makes merge succeed' ' + git read-tree --reset -u HEAD && + git merge-recursive --ignore-space-change HEAD^ -- HEAD remote +' + +test_expect_success '--ignore-space-change: our w/s-only change wins' ' + q_to_cr <<-\EOF >expected && + justice and holiness and is the nurse of his age and theQ + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-space-change HEAD^ -- HEAD remote && + grep "justice and holiness" text.txt >actual && + test_cmp expected actual +' + +test_expect_success '--ignore-space-change: their real change wins over w/s' ' + cat <<-\EOF >expected && + it?---to speak the truth and to pay your debts---no more than this? And + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-space-change HEAD^ -- HEAD remote && + grep "pay your debts" text.txt >actual && + test_cmp expected actual +' + +test_expect_success '--ignore-space-change: does not ignore new spaces' ' + cat <<-\EOF >expected1 && + Well said, Cephalus, I replied; but as con cerning justice, what is + EOF + q_to_cr <<-\EOF >expected2 && + un intentionally; and when he departs to the world below he is not inQ + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-space-change HEAD^ -- HEAD remote && + grep "Well said" text.txt >actual1 && + grep "when he departs" text.txt >actual2 && + test_cmp expected1 actual1 && + test_cmp expected2 actual2 +' + +test_expect_success '--ignore-all-space drops their new spaces' ' + cat <<-\EOF >expected && + Well said, Cephalus, I replied; but as concerning justice, what is + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-all-space HEAD^ -- HEAD remote && + grep "Well said" text.txt >actual && + test_cmp expected actual +' + +test_expect_success '--ignore-all-space keeps our new spaces' ' + q_to_cr <<-\EOF >expected && + un intentionally; and when he departs to the world below he is not inQ + EOF + + git read-tree --reset -u HEAD && + git merge-recursive --ignore-all-space HEAD^ -- HEAD remote && + grep "when he departs" text.txt >actual && + test_cmp expected actual +' + +test_expect_success '--ignore-space-at-eol' ' + q_to_cr <<-\EOF >expected && + <<<<<<< HEAD + is not in his right mind; ought I to give them back to him? No oneQ + ======= + is not in his right mind, ought I to give them back to him? No one + >>>>>>> remote + EOF + + git read-tree --reset -u HEAD && + test_must_fail git merge-recursive --ignore-space-at-eol \ + HEAD^ -- HEAD remote && + conflict_hunks text.txt >actual && + test_cmp expected actual +' + +test_done diff --git a/t/t3050-subprojects-fetch.sh b/t/t3050-subprojects-fetch.sh index 4261e9641e..2f5f41a012 100755 --- a/t/t3050-subprojects-fetch.sh +++ b/t/t3050-subprojects-fetch.sh @@ -10,10 +10,10 @@ test_expect_success setup ' cd sub && git init && >subfile && - git add subfile + git add subfile && git commit -m "subproject commit #1" ) && - >mainfile + >mainfile && git add sub mainfile && test_tick && git commit -m "superproject commit #1" diff --git a/t/t3203-branch-output.sh b/t/t3203-branch-output.sh index 809d1c4ed4..6028748c6c 100755 --- a/t/t3203-branch-output.sh +++ b/t/t3203-branch-output.sh @@ -12,13 +12,13 @@ test_expect_success 'make commits' ' ' test_expect_success 'make branches' ' - git branch branch-one + git branch branch-one && git branch branch-two HEAD^ ' test_expect_success 'make remote branches' ' - git update-ref refs/remotes/origin/branch-one branch-one - git update-ref refs/remotes/origin/branch-two branch-two + git update-ref refs/remotes/origin/branch-one branch-one && + git update-ref refs/remotes/origin/branch-two branch-two && git symbolic-ref refs/remotes/origin/HEAD refs/remotes/origin/branch-one ' diff --git a/t/t3300-funny-names.sh b/t/t3300-funny-names.sh index f39a261d80..5e29a05259 100755 --- a/t/t3300-funny-names.sh +++ b/t/t3300-funny-names.sh @@ -43,8 +43,8 @@ test_expect_success TABS_IN_FILENAMES 'git ls-files no-funny' \ test_cmp expected current' test_expect_success TABS_IN_FILENAMES 'setup expect' ' -t0=`git write-tree` -echo "$t0" >t0 +t0=`git write-tree` && +echo "$t0" >t0 && cat > expected <<\EOF just space @@ -69,8 +69,8 @@ test_expect_success TABS_IN_FILENAMES 'git ls-files -z with-funny' \ test_cmp expected current' test_expect_success TABS_IN_FILENAMES 'setup expect' ' -t1=`git write-tree` -echo "$t1" >t1 +t1=`git write-tree` && +echo "$t1" >t1 && cat > expected <<\EOF just space diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh index a2b79a0430..7e84ab9790 100755 --- a/t/t3301-notes.sh +++ b/t/t3301-notes.sh @@ -52,7 +52,7 @@ test_expect_success 'refusing to edit notes in refs/remotes/' ' # 1 indicates caught gracefully by die, 128 means git-show barked test_expect_success 'handle empty notes gracefully' ' - git notes show ; test 1 = $? + test_expect_code 1 git notes show ' test_expect_success 'show non-existent notes entry with %N' ' @@ -627,16 +627,16 @@ test_expect_success '--show-notes=ref accumulates' ' test_expect_success 'Allow notes on non-commits (trees, blobs, tags)' ' git config core.notesRef refs/notes/other && - echo "Note on a tree" > expect + echo "Note on a tree" > expect && git notes add -m "Note on a tree" HEAD: && git notes show HEAD: > actual && test_cmp expect actual && - echo "Note on a blob" > expect + echo "Note on a blob" > expect && filename=$(git ls-tree --name-only HEAD | head -n1) && git notes add -m "Note on a blob" HEAD:$filename && git notes show HEAD:$filename > actual && test_cmp expect actual && - echo "Note on a tag" > expect + echo "Note on a tag" > expect && git tag -a -m "This is an annotated tag" foobar HEAD^ && git notes add -m "Note on a tag" foobar && git notes show foobar > actual && diff --git a/t/t3307-notes-man.sh b/t/t3307-notes-man.sh index 3269f2eebd..2ea3be6546 100755 --- a/t/t3307-notes-man.sh +++ b/t/t3307-notes-man.sh @@ -26,7 +26,7 @@ test_expect_success 'example 1: notes to add an Acked-by line' ' ' test_expect_success 'example 2: binary notes' ' - cp "$TEST_DIRECTORY"/test4012.png . + cp "$TEST_DIRECTORY"/test4012.png . && git checkout B && blob=$(git hash-object -w test4012.png) && git notes --ref=logo add -C "$blob" && diff --git a/t/t3402-rebase-merge.sh b/t/t3402-rebase-merge.sh index 2bea65634a..be8c1d5ef9 100755 --- a/t/t3402-rebase-merge.sh +++ b/t/t3402-rebase-merge.sh @@ -117,4 +117,25 @@ test_expect_success 'picking rebase' ' esac ' +test_expect_success 'rebase -s funny -Xopt' ' + test_when_finished "rm -fr test-bin funny.was.run" && + mkdir test-bin && + cat >test-bin/git-merge-funny <<-EOF && + #!$SHELL_PATH + case "\$1" in --opt) ;; *) exit 2 ;; esac + shift && + >funny.was.run && + exec git merge-recursive "\$@" + EOF + chmod +x test-bin/git-merge-funny && + git reset --hard && + git checkout -b test-funny master^ && + test_commit funny && + ( + PATH=./test-bin:$PATH + git rebase -s funny -Xopt master + ) && + test -f funny.was.run +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 7d20a74c5c..5cb7e70d54 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -7,34 +7,39 @@ test_description='git rebase interactive This test runs git rebase "interactively", by faking an edit, and verifies that the result still makes sense. + +Initial setup: + + one - two - three - four (conflict-branch) + / + A - B - C - D - E (master) + | \ + | F - G - H (branch1) + | \ + |\ I (branch2) + | \ + | J - K - L - M (no-conflict-branch) + \ + N - O - P (no-ff-branch) + + where A, B, D and G all touch file1, and one, two, three, four all + touch file "conflict". ' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-rebase.sh +test_cmp_rev () { + git rev-parse --verify "$1" >expect.rev && + git rev-parse --verify "$2" >actual.rev && + test_cmp expect.rev actual.rev +} + set_fake_editor -# Set up the repository like this: -# -# one - two - three - four (conflict-branch) -# / -# A - B - C - D - E (master) -# | \ -# | F - G - H (branch1) -# | \ -# |\ I (branch2) -# | \ -# | J - K - L - M (no-conflict-branch) -# \ -# N - O - P (no-ff-branch) -# -# where A, B, D and G all touch file1, and one, two, three, four all -# touch file "conflict". -# # WARNING: Modifications to the initial repository can change the SHA ID used # in the expect2 file for the 'stop on conflicting pick' test. - test_expect_success 'setup' ' test_commit A file1 && test_commit B file1 && @@ -46,22 +51,21 @@ test_expect_success 'setup' ' test_commit G file1 && test_commit H file5 && git checkout -b branch2 F && - test_commit I file6 + test_commit I file6 && git checkout -b conflict-branch A && - for n in one two three four - do - test_commit $n conflict - done && + test_commit one conflict && + test_commit two conflict && + test_commit three conflict && + test_commit four conflict && git checkout -b no-conflict-branch A && - for n in J K L M - do - test_commit $n file$n - done && + test_commit J fileJ && + test_commit K fileK && + test_commit L fileL && + test_commit M fileM && git checkout -b no-ff-branch A && - for n in N O P - do - test_commit $n file$n - done + test_commit N fileN && + test_commit O fileO && + test_commit P fileP ' # "exec" commands are ran with the user shell by default, but this may @@ -82,20 +86,12 @@ test_expect_success 'rebase -i with the exec command' ' test_path_is_file touch-one && test_path_is_file touch-two && test_path_is_missing touch-three " (should have stopped before)" && - test $(git rev-parse C) = $(git rev-parse HEAD) || { - echo "Stopped at wrong revision:" - echo "($(git describe --tags HEAD) instead of C)" - false - } && + test_cmp_rev C HEAD && git rebase --continue && test_path_is_file touch-three && test_path_is_file "touch-file name with spaces" && test_path_is_file touch-after-semicolon && - test $(git rev-parse master) = $(git rev-parse HEAD) || { - echo "Stopped at wrong revision:" - echo "($(git describe --tags HEAD) instead of master)" - false - } && + test_cmp_rev master HEAD && rm -f touch-* ' @@ -116,11 +112,7 @@ test_expect_success 'rebase -i with the exec command checks tree cleanness' ' export FAKE_LINES && test_must_fail git rebase -i HEAD^ ) && - test $(git rev-parse master^) = $(git rev-parse HEAD) || { - echo "Stopped at wrong revision:" - echo "($(git describe --tags HEAD) instead of master^)" - false - } && + test_cmp_rev master^ HEAD && git reset --hard && git rebase --continue ' @@ -584,7 +576,7 @@ test_expect_success 'do "noop" when there is nothing to cherry-pick' ' git checkout -b branch4 HEAD && GIT_EDITOR=: git commit --amend \ - --author="Somebody else <somebody@else.com>" + --author="Somebody else <somebody@else.com>" && test $(git rev-parse branch3) != $(git rev-parse branch4) && git rebase -i branch3 && test $(git rev-parse branch3) = $(git rev-parse branch4) @@ -599,7 +591,7 @@ test_expect_success 'submodule rebase setup' ' git add elif && git commit -m "submodule initial" ) && echo 1 >file1 && - git add file1 sub + git add file1 sub && test_tick && git commit -m "One" && echo 2 >file1 && diff --git a/t/t3406-rebase-message.sh b/t/t3406-rebase-message.sh index 85fc7c4af8..fe5f936988 100755 --- a/t/t3406-rebase-message.sh +++ b/t/t3406-rebase-message.sh @@ -43,20 +43,20 @@ test_expect_success 'rebase -m' ' ' test_expect_success 'rebase --stat' ' - git reset --hard start + git reset --hard start && git rebase --stat master >diffstat.txt && grep "^ fileX | *1 +$" diffstat.txt ' test_expect_success 'rebase w/config rebase.stat' ' - git reset --hard start + git reset --hard start && git config rebase.stat true && git rebase master >diffstat.txt && grep "^ fileX | *1 +$" diffstat.txt ' test_expect_success 'rebase -n overrides config rebase.stat config' ' - git reset --hard start + git reset --hard start && git config rebase.stat true && git rebase -n master >diffstat.txt && ! grep "^ fileX | *1 +$" diffstat.txt diff --git a/t/t3408-rebase-multi-line.sh b/t/t3408-rebase-multi-line.sh index 2062b858bb..6b84e6042a 100755 --- a/t/t3408-rebase-multi-line.sh +++ b/t/t3408-rebase-multi-line.sh @@ -16,7 +16,7 @@ test_expect_success setup ' git commit -a -m "A sample commit log message that has a long summary that spills over multiple lines. -But otherwise with a sane description." +But otherwise with a sane description." && git branch side && diff --git a/t/t3409-rebase-preserve-merges.sh b/t/t3409-rebase-preserve-merges.sh index 74161a42ec..19341e5ca1 100755 --- a/t/t3409-rebase-preserve-merges.sh +++ b/t/t3409-rebase-preserve-merges.sh @@ -72,7 +72,7 @@ test_expect_success 'rebase -p fakes interactive rebase' ' git fetch && git rebase -p origin/topic && test 1 = $(git rev-list --all --pretty=oneline | grep "Modify A" | wc -l) && - test 1 = $(git rev-list --all --pretty=oneline | grep "Merge remote branch " | wc -l) + test 1 = $(git rev-list --all --pretty=oneline | grep "Merge remote-tracking branch " | wc -l) ) ' diff --git a/t/t3412-rebase-root.sh b/t/t3412-rebase-root.sh index 5869061c5b..086c91c7b4 100755 --- a/t/t3412-rebase-root.sh +++ b/t/t3412-rebase-root.sh @@ -173,14 +173,14 @@ EOF test_expect_success 'pre-rebase hook stops rebase' ' git checkout -b stops1 other && test_must_fail git rebase --root --onto master && - test "z$(git symbolic-ref HEAD)" = zrefs/heads/stops1 + test "z$(git symbolic-ref HEAD)" = zrefs/heads/stops1 && test 0 = $(git rev-list other...stops1 | wc -l) ' test_expect_success 'pre-rebase hook stops rebase -i' ' git checkout -b stops2 other && test_must_fail git rebase --root --onto master && - test "z$(git symbolic-ref HEAD)" = zrefs/heads/stops2 + test "z$(git symbolic-ref HEAD)" = zrefs/heads/stops2 && test 0 = $(git rev-list other...stops2 | wc -l) ' diff --git a/t/t3417-rebase-whitespace-fix.sh b/t/t3417-rebase-whitespace-fix.sh index 220a740ee8..1fb3e499b4 100755 --- a/t/t3417-rebase-whitespace-fix.sh +++ b/t/t3417-rebase-whitespace-fix.sh @@ -89,7 +89,7 @@ test_expect_success 'same, but do not remove trailing spaces' ' git config core.whitespace "-blank-at-eol" && git reset --hard HEAD^ && cp third file && git add file && git commit -m third && - git rebase --whitespace=fix HEAD^^ + git rebase --whitespace=fix HEAD^^ && git diff --exit-code HEAD^:file expect-second && test_cmp file third ' diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh new file mode 100755 index 0000000000..1aee483510 --- /dev/null +++ b/t/t3419-rebase-patch-id.sh @@ -0,0 +1,109 @@ +#!/bin/bash + +test_description='git rebase - test patch id computation' + +. ./test-lib.sh + +test_set_prereq NOT_EXPENSIVE +test -n "$GIT_PATCHID_TIMING_TESTS" && test_set_prereq EXPENSIVE +test -x /usr/bin/time && test_set_prereq USR_BIN_TIME + +count() +{ + i=0 + while test $i -lt $1 + do + echo "$i" + i=$(($i+1)) + done +} + +scramble() +{ + i=0 + while read x + do + if test $i -ne 0 + then + echo "$x" + fi + i=$(((i+1) % 10)) + done < "$1" > "$1.new" + mv -f "$1.new" "$1" +} + +run() +{ + echo \$ "$@" + /usr/bin/time "$@" >/dev/null +} + +test_expect_success 'setup' ' + git commit --allow-empty -m initial + git tag root +' + +do_tests() +{ + pr=$1 + nlines=$2 + + test_expect_success $pr "setup: $nlines lines" " + rm -f .gitattributes && + git checkout -q -f master && + git reset --hard root && + count $nlines >file && + git add file && + git commit -q -m initial && + git branch -f other && + + scramble file && + git add file && + git commit -q -m 'change big file' && + + git checkout -q other && + : >newfile && + git add newfile && + git commit -q -m 'add small file' && + + git cherry-pick master >/dev/null 2>&1 + " + + test_debug " + run git diff master^\! + " + + test_expect_success $pr 'setup attributes' " + echo 'file binary' >.gitattributes + " + + test_debug " + run git format-patch --stdout master && + run git format-patch --stdout --ignore-if-in-upstream master + " + + test_expect_success $pr 'detect upstream patch' " + git checkout -q master && + scramble file && + git add file && + git commit -q -m 'change big file again' && + git checkout -q other^{} && + git rebase master && + test_must_fail test -n \"\$(git rev-list master...HEAD~)\" + " + + test_expect_success $pr 'do not drop patch' " + git branch -f squashed master && + git checkout -q -f squashed && + git reset -q --soft HEAD~2 && + git commit -q -m squashed && + git checkout -q other^{} && + test_must_fail git rebase squashed && + rm -rf .git/rebase-apply + " +} + +do_tests NOT_EXPENSIVE 500 +do_tests EXPENSIVE 50000 + +test_done diff --git a/t/t3504-cherry-pick-rerere.sh b/t/t3504-cherry-pick-rerere.sh index f7b3518a32..e6a64816ef 100755 --- a/t/t3504-cherry-pick-rerere.sh +++ b/t/t3504-cherry-pick-rerere.sh @@ -23,7 +23,7 @@ test_expect_success 'conflicting merge' ' test_expect_success 'fixup' ' echo foo-dev >foo && git add foo && test_tick && git commit -q -m 4 && - git reset --hard HEAD^ + git reset --hard HEAD^ && echo foo-dev >expect ' @@ -33,7 +33,7 @@ test_expect_success 'cherry-pick conflict' ' ' test_expect_success 'reconfigure' ' - git config rerere.enabled false + git config rerere.enabled false && git reset --hard ' diff --git a/t/t3506-cherry-pick-ff.sh b/t/t3506-cherry-pick-ff.sh index e17ae712b1..51ca391e47 100755 --- a/t/t3506-cherry-pick-ff.sh +++ b/t/t3506-cherry-pick-ff.sh @@ -95,4 +95,14 @@ test_expect_success 'cherry pick a merge relative to nonexistent parent with --f test_must_fail git cherry-pick --ff -m 3 C ' +test_expect_success 'cherry pick a root commit with --ff' ' + git reset --hard first -- && + git rm file1 && + echo first >file2 && + git add file2 && + git commit --amend -m "file2" && + git cherry-pick --ff first && + test "$(git rev-parse --verify HEAD)" = "1df192cd8bc58a2b275d842cede4d221ad9000d1" +' + test_done diff --git a/t/t3902-quoted.sh b/t/t3902-quoted.sh index 7d49469841..da82b655b3 100755 --- a/t/t3902-quoted.sh +++ b/t/t3902-quoted.sh @@ -36,19 +36,19 @@ for_each_name () { test_expect_success TABS_IN_FILENAMES 'setup' ' mkdir "$FN" && - for_each_name "echo initial >\"\$name\"" + for_each_name "echo initial >\"\$name\"" && git add . && git commit -q -m Initial && for_each_name "echo second >\"\$name\"" && - git commit -a -m Second + git commit -a -m Second && for_each_name "echo modified >\"\$name\"" ' test_expect_success TABS_IN_FILENAMES 'setup expected files' ' -cat >expect.quoted <<\EOF +cat >expect.quoted <<\EOF && Name "Name and a\nLF" "Name and an\tHT" diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 903a122efe..6fd560ccf1 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -157,7 +157,7 @@ EOF test_expect_success 'stash branch' ' echo foo > file && - git commit file -m first + git commit file -m first && echo bar > file && echo bar2 > file2 && git add file2 && @@ -255,7 +255,7 @@ test_expect_success 'stash rm and ignore' ' echo file >.gitignore && git stash save "rm and ignore" && test bar = "$(cat file)" && - test file = "$(cat .gitignore)" + test file = "$(cat .gitignore)" && git stash apply && ! test -r file && test file = "$(cat .gitignore)" @@ -268,7 +268,7 @@ test_expect_success 'stash rm and ignore (stage .gitignore)' ' git add .gitignore && git stash save "rm and ignore (stage .gitignore)" && test bar = "$(cat file)" && - ! test -r .gitignore + ! test -r .gitignore && git stash apply && ! test -r file && test file = "$(cat .gitignore)" diff --git a/t/t3904-stash-patch.sh b/t/t3904-stash-patch.sh index d1819ca23a..1e7193ac0b 100755 --- a/t/t3904-stash-patch.sh +++ b/t/t3904-stash-patch.sh @@ -20,7 +20,7 @@ test_expect_success PERL 'setup' ' # note: bar sorts before dir, so the first 'n' is always to skip 'bar' test_expect_success PERL 'saying "n" does nothing' ' - set_state dir/foo work index + set_state dir/foo work index && (echo n; echo n) | test_must_fail git stash save -p && verify_state dir/foo work index && verify_saved_state bar diff --git a/t/t4002-diff-basic.sh b/t/t4002-diff-basic.sh index 73441a5165..9fb8ca06a8 100755 --- a/t/t4002-diff-basic.sh +++ b/t/t4002-diff-basic.sh @@ -205,8 +205,8 @@ test_expect_success \ 'rm -fr Z [A-Z][A-Z] && git read-tree $tree_A && git checkout-index -f -a && - git read-tree --reset $tree_O || return 1 - git update-index --refresh >/dev/null ;# this can exit non-zero + git read-tree --reset $tree_O && + test_must_fail git update-index --refresh -q && git diff-files >.test-a && cmp_diff_files_output .test-a .test-recursive-OA' @@ -215,8 +215,8 @@ test_expect_success \ 'rm -fr Z [A-Z][A-Z] && git read-tree $tree_B && git checkout-index -f -a && - git read-tree --reset $tree_O || return 1 - git update-index --refresh >/dev/null ;# this can exit non-zero + git read-tree --reset $tree_O && + test_must_fail git update-index --refresh -q && git diff-files >.test-a && cmp_diff_files_output .test-a .test-recursive-OB' @@ -225,8 +225,8 @@ test_expect_success \ 'rm -fr Z [A-Z][A-Z] && git read-tree $tree_B && git checkout-index -f -a && - git read-tree --reset $tree_A || return 1 - git update-index --refresh >/dev/null ;# this can exit non-zero + git read-tree --reset $tree_A && + test_must_fail git update-index --refresh -q && git diff-files >.test-a && cmp_diff_files_output .test-a .test-recursive-AB' diff --git a/t/t4008-diff-break-rewrite.sh b/t/t4008-diff-break-rewrite.sh index e19ca65885..d79d9e1e71 100755 --- a/t/t4008-diff-break-rewrite.sh +++ b/t/t4008-diff-break-rewrite.sh @@ -155,7 +155,7 @@ test_expect_success \ git checkout-index -f -u -a && sed -e "s/git/GIT/" file0 >file1 && sed -e "s/git/GET/" file0 >file2 && - rm -f file0 + rm -f file0 && git update-index --add --remove file0 file1 file2' test_expect_success \ diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index 6f6948925f..408a19c4c2 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -88,4 +88,30 @@ test_expect_success SYMLINKS \ test_must_fail git diff --no-index pinky brain > output 2> output.err && grep narf output && ! grep error output.err' + +test_expect_success SYMLINKS 'setup symlinks with attributes' ' + echo "*.bin diff=bin" >>.gitattributes && + echo content >file.bin && + ln -s file.bin link.bin && + git add -N file.bin link.bin +' + +cat >expect <<'EOF' +diff --git a/file.bin b/file.bin +index e69de29..d95f3ad 100644 +Binary files a/file.bin and b/file.bin differ +diff --git a/link.bin b/link.bin +index e69de29..dce41ec 120000 +--- a/link.bin ++++ b/link.bin +@@ -0,0 +1 @@ ++file.bin +\ No newline at end of file +EOF +test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' ' + git config diff.bin.binary true && + git diff file.bin link.bin >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh index bc46563afc..05ec062832 100755 --- a/t/t4012-diff-binary.sh +++ b/t/t4012-diff-binary.sh @@ -77,10 +77,6 @@ test_expect_success 'apply binary patch' \ tree1=`git write-tree` && test "$tree1" = "$tree0"' -nul_to_q() { - perl -pe 'y/\000/Q/' -} - test_expect_success 'diff --no-index with binary creation' ' echo Q | q_to_nul >binary && (: hide error code from diff, which just indicates differences diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 19857f4326..9a66520588 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -210,6 +210,9 @@ log -m -p master log -SF master log -S F master log -SF -p master +log -GF master +log -GF -p master +log -GF -p --pickaxe-all master log --decorate --all log --decorate=full --all diff --git a/t/t4013/diff.log_-GF_-p_--pickaxe-all_master b/t/t4013/diff.log_-GF_-p_--pickaxe-all_master new file mode 100644 index 0000000000..d36f88098b --- /dev/null +++ b/t/t4013/diff.log_-GF_-p_--pickaxe-all_master @@ -0,0 +1,27 @@ +$ git log -GF -p --pickaxe-all master +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third + +diff --git a/dir/sub b/dir/sub +index 8422d40..cead32e 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -2,3 +2,5 @@ A + B + C + D ++E ++F +diff --git a/file1 b/file1 +new file mode 100644 +index 0000000..b1e6722 +--- /dev/null ++++ b/file1 +@@ -0,0 +1,3 @@ ++A ++B ++C +$ diff --git a/t/t4013/diff.log_-GF_-p_master b/t/t4013/diff.log_-GF_-p_master new file mode 100644 index 0000000000..9d93f2c23a --- /dev/null +++ b/t/t4013/diff.log_-GF_-p_master @@ -0,0 +1,18 @@ +$ git log -GF -p master +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third + +diff --git a/dir/sub b/dir/sub +index 8422d40..cead32e 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -2,3 +2,5 @@ A + B + C + D ++E ++F +$ diff --git a/t/t4013/diff.log_-GF_master b/t/t4013/diff.log_-GF_master new file mode 100644 index 0000000000..4c6708d2d0 --- /dev/null +++ b/t/t4013/diff.log_-GF_master @@ -0,0 +1,7 @@ +$ git log -GF master +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third +$ diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index f87434b9f8..07bf6eb49d 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -12,24 +12,29 @@ test_expect_success setup ' for i in 1 2 3 4 5 6 7 8 9 10; do echo "$i"; done >file && cat file >elif && git add file elif && + test_tick && git commit -m Initial && git checkout -b side && for i in 1 2 5 6 A B C 7 8 9 10; do echo "$i"; done >file && test_chmod +x elif && + test_tick && git commit -m "Side changes #1" && for i in D E F; do echo "$i"; done >>file && git update-index file && + test_tick && git commit -m "Side changes #2" && git tag C2 && for i in 5 6 1 2 3 A 4 B C 7 8 9 10 D E F; do echo "$i"; done >file && git update-index file && + test_tick && git commit -m "Side changes #3 with \\n backslash-n in it." && git checkout master && git diff-tree -p C2 | git apply --index && + test_tick && git commit -m "Master accepts moral equivalent of #2" ' @@ -51,6 +56,22 @@ test_expect_success "format-patch --ignore-if-in-upstream" ' ' +test_expect_success "format-patch doesn't consider merge commits" ' + + git checkout -b slave master && + echo "Another line" >>file && + test_tick && + git commit -am "Slave change #1" && + echo "Yet another line" >>file && + test_tick && + git commit -am "Slave change #2" && + git checkout -b merger master && + test_tick && + git merge --no-ff slave && + cnt=`git format-patch -3 --stdout | grep "^From " | wc -l` && + test $cnt = 3 +' + test_expect_success "format-patch result applies" ' git checkout -b rebuild-0 master && diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index 935d101fe8..8622eb51c7 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -330,7 +330,7 @@ test_expect_success 'check space before tab in indent (space-before-tab: on)' ' test_expect_success 'check spaces as indentation (indent-with-non-tab: off)' ' - git config core.whitespace "-indent-with-non-tab" + git config core.whitespace "-indent-with-non-tab" && echo " foo ();" > x && git diff --check @@ -491,4 +491,41 @@ test_expect_success 'combined diff with autocrlf conversion' ' ' +# Start testing the colored format for whitespace checks + +test_expect_success 'setup diff colors' ' + git config color.diff always && + git config color.diff.plain normal && + git config color.diff.meta bold && + git config color.diff.frag cyan && + git config color.diff.func normal && + git config color.diff.old red && + git config color.diff.new green && + git config color.diff.commit yellow && + git config color.diff.whitespace "normal red" && + + git config core.autocrlf false +' +cat >expected <<\EOF +<BOLD>diff --git a/x b/x<RESET> +<BOLD>index 9daeafb..2874b91 100644<RESET> +<BOLD>--- a/x<RESET> +<BOLD>+++ b/x<RESET> +<CYAN>@@ -1 +1,4 @@<RESET> + test<RESET> +<GREEN>+<RESET><GREEN>{<RESET> +<GREEN>+<RESET><BRED> <RESET> +<GREEN>+<RESET><GREEN>}<RESET> +EOF + +test_expect_success 'diff that introduces a line with only tabs' ' + git config core.whitespace blank-at-eol && + git reset --hard && + echo "test" > x && + git commit -m "initial" x && + echo "{NTN}" | tr "NT" "\n\t" >> x && + git -c color.diff=always diff | test_decode_color >current && + test_cmp expected current +' + test_done diff --git a/t/t4017-diff-retval.sh b/t/t4017-diff-retval.sh index 61589853df..95a7ca7070 100755 --- a/t/t4017-diff-retval.sh +++ b/t/t4017-diff-retval.sh @@ -29,66 +29,49 @@ test_expect_success 'git diff --quiet -w HEAD^ HEAD' ' ' test_expect_success 'git diff-tree HEAD^ HEAD' ' - git diff-tree --exit-code HEAD^ HEAD - test $? = 1 + test_expect_code 1 git diff-tree --exit-code HEAD^ HEAD ' test_expect_success 'git diff-tree HEAD^ HEAD -- a' ' git diff-tree --exit-code HEAD^ HEAD -- a - test $? = 0 ' test_expect_success 'git diff-tree HEAD^ HEAD -- b' ' - git diff-tree --exit-code HEAD^ HEAD -- b - test $? = 1 + test_expect_code 1 git diff-tree --exit-code HEAD^ HEAD -- b ' test_expect_success 'echo HEAD | git diff-tree --stdin' ' - echo $(git rev-parse HEAD) | git diff-tree --exit-code --stdin - test $? = 1 + echo $(git rev-parse HEAD) | test_expect_code 1 git diff-tree --exit-code --stdin ' test_expect_success 'git diff-tree HEAD HEAD' ' git diff-tree --exit-code HEAD HEAD - test $? = 0 ' test_expect_success 'git diff-files' ' git diff-files --exit-code - test $? = 0 ' test_expect_success 'git diff-index --cached HEAD' ' git diff-index --exit-code --cached HEAD - test $? = 0 ' test_expect_success 'git diff-index --cached HEAD^' ' - git diff-index --exit-code --cached HEAD^ - test $? = 1 + test_expect_code 1 git diff-index --exit-code --cached HEAD^ ' test_expect_success 'git diff-index --cached HEAD^' ' echo text >>b && echo 3 >c && - git add . && { - git diff-index --exit-code --cached HEAD^ - test $? = 1 - } + git add . && + test_expect_code 1 git diff-index --exit-code --cached HEAD^ ' test_expect_success 'git diff-tree -Stext HEAD^ HEAD -- b' ' - git commit -m "text in b" && { - git diff-tree -p --exit-code -Stext HEAD^ HEAD -- b - test $? = 1 - } + git commit -m "text in b" && + test_expect_code 1 git diff-tree -p --exit-code -Stext HEAD^ HEAD -- b ' test_expect_success 'git diff-tree -Snot-found HEAD^ HEAD -- b' ' git diff-tree -p --exit-code -Snot-found HEAD^ HEAD -- b - test $? = 0 ' test_expect_success 'git diff-files' ' - echo 3 >>c && { - git diff-files --exit-code - test $? = 1 - } + echo 3 >>c && + test_expect_code 1 git diff-files --exit-code ' test_expect_success 'git diff-index --cached HEAD' ' - git update-index c && { - git diff-index --exit-code --cached HEAD - test $? = 1 - } + git update-index c && + test_expect_code 1 git diff-index --exit-code --cached HEAD ' test_expect_success '--check --exit-code returns 0 for no difference' ' @@ -100,30 +83,26 @@ test_expect_success '--check --exit-code returns 0 for no difference' ' test_expect_success '--check --exit-code returns 1 for a clean difference' ' echo "good" > a && - git diff --check --exit-code - test $? = 1 + test_expect_code 1 git diff --check --exit-code ' test_expect_success '--check --exit-code returns 3 for a dirty difference' ' echo "bad " >> a && - git diff --check --exit-code - test $? = 3 + test_expect_code 3 git diff --check --exit-code ' test_expect_success '--check with --no-pager returns 2 for dirty difference' ' - git --no-pager diff --check - test $? = 2 + test_expect_code 2 git --no-pager diff --check ' test_expect_success 'check should test not just the last line' ' echo "" >>a && - git --no-pager diff --check - test $? = 2 + test_expect_code 2 git --no-pager diff --check ' @@ -133,10 +112,8 @@ test_expect_success 'check detects leftover conflict markers' ' echo binary >>b && git commit -m "side" b && test_must_fail git merge master && - git add b && ( - git --no-pager diff --cached --check >test.out - test $? = 2 - ) && + git add b && + test_expect_code 2 git --no-pager diff --cached --check >test.out && test 3 = $(grep "conflict marker" test.out | wc -l) && git reset --hard ' @@ -146,19 +123,13 @@ test_expect_success 'check honors conflict marker length' ' echo ">>>>>>> boo" >>b && echo "======" >>a && git diff --check a && - ( - git diff --check b - test $? = 2 - ) && + test_expect_code 2 git diff --check b && git reset --hard && echo ">>>>>>>> boo" >>b && echo "========" >>a && git diff --check && echo "b conflict-marker-size=8" >.gitattributes && - ( - git diff --check b - test $? = 2 - ) && + test_expect_code 2 git diff --check b && git diff --check a && git reset --hard ' diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index c8e19372b0..0a61b57b5f 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -32,7 +32,7 @@ EOF sed 's/beer\\/beer,\\/' < Beer.java > Beer-correct.java -builtin_patterns="bibtex cpp csharp html java objc pascal php python ruby tex" +builtin_patterns="bibtex cpp csharp fortran html java objc pascal php python ruby tex" for p in $builtin_patterns do test_expect_success "builtin $p pattern compiles" ' diff --git a/t/t4019-diff-wserror.sh b/t/t4019-diff-wserror.sh index f6d1f1ebab..f7c85ec604 100755 --- a/t/t4019-diff-wserror.sh +++ b/t/t4019-diff-wserror.sh @@ -36,11 +36,12 @@ prepare_output () { git diff --color >output $grep_a "$blue_grep" output >error $grep_a -v "$blue_grep" output >normal + return 0 } test_expect_success default ' - prepare_output + prepare_output && grep Eight normal >/dev/null && grep HT error >/dev/null && @@ -52,8 +53,8 @@ test_expect_success default ' test_expect_success 'without -trail' ' - git config core.whitespace -trail - prepare_output + git config core.whitespace -trail && + prepare_output && grep Eight normal >/dev/null && grep HT error >/dev/null && @@ -65,9 +66,9 @@ test_expect_success 'without -trail' ' test_expect_success 'without -trail (attribute)' ' - git config --unset core.whitespace - echo "F whitespace=-trail" >.gitattributes - prepare_output + test_might_fail git config --unset core.whitespace && + echo "F whitespace=-trail" >.gitattributes && + prepare_output && grep Eight normal >/dev/null && grep HT error >/dev/null && @@ -79,9 +80,9 @@ test_expect_success 'without -trail (attribute)' ' test_expect_success 'without -space' ' - rm -f .gitattributes - git config core.whitespace -space - prepare_output + rm -f .gitattributes && + git config core.whitespace -space && + prepare_output && grep Eight normal >/dev/null && grep HT normal >/dev/null && @@ -93,9 +94,9 @@ test_expect_success 'without -space' ' test_expect_success 'without -space (attribute)' ' - git config --unset core.whitespace - echo "F whitespace=-space" >.gitattributes - prepare_output + test_might_fail git config --unset core.whitespace && + echo "F whitespace=-space" >.gitattributes && + prepare_output && grep Eight normal >/dev/null && grep HT normal >/dev/null && @@ -107,9 +108,9 @@ test_expect_success 'without -space (attribute)' ' test_expect_success 'with indent-non-tab only' ' - rm -f .gitattributes - git config core.whitespace indent,-trailing,-space - prepare_output + rm -f .gitattributes && + git config core.whitespace indent,-trailing,-space && + prepare_output && grep Eight error >/dev/null && grep HT normal >/dev/null && @@ -121,9 +122,9 @@ test_expect_success 'with indent-non-tab only' ' test_expect_success 'with indent-non-tab only (attribute)' ' - git config --unset core.whitespace - echo "F whitespace=indent,-trailing,-space" >.gitattributes - prepare_output + test_might_fail git config --unset core.whitespace && + echo "F whitespace=indent,-trailing,-space" >.gitattributes && + prepare_output && grep Eight error >/dev/null && grep HT normal >/dev/null && @@ -135,9 +136,9 @@ test_expect_success 'with indent-non-tab only (attribute)' ' test_expect_success 'with cr-at-eol' ' - rm -f .gitattributes - git config core.whitespace cr-at-eol - prepare_output + rm -f .gitattributes && + git config core.whitespace cr-at-eol && + prepare_output && grep Eight normal >/dev/null && grep HT error >/dev/null && @@ -149,9 +150,9 @@ test_expect_success 'with cr-at-eol' ' test_expect_success 'with cr-at-eol (attribute)' ' - git config --unset core.whitespace - echo "F whitespace=trailing,cr-at-eol" >.gitattributes - prepare_output + test_might_fail git config --unset core.whitespace && + echo "F whitespace=trailing,cr-at-eol" >.gitattributes && + prepare_output && grep Eight normal >/dev/null && grep HT error >/dev/null && @@ -179,11 +180,11 @@ test_expect_success 'trailing empty lines (2)' ' ' test_expect_success 'do not color trailing cr in context' ' - git config --unset core.whitespace + test_might_fail git config --unset core.whitespace && rm -f .gitattributes && echo AAAQ | tr Q "\015" >G && git add G && - echo BBBQ | tr Q "\015" >>G + echo BBBQ | tr Q "\015" >>G && git diff --color G | tr "\015" Q >output && grep "BBB.*${blue_grep}Q" output && grep "AAA.*\[mQ" output diff --git a/t/t4021-format-patch-numbered.sh b/t/t4021-format-patch-numbered.sh index 709b3231ca..886494b58f 100755 --- a/t/t4021-format-patch-numbered.sh +++ b/t/t4021-format-patch-numbered.sh @@ -95,7 +95,7 @@ test_expect_success 'format.numbered && --keep-subject' ' test_expect_success 'format.numbered = auto' ' - git config format.numbered auto + git config format.numbered auto && git format-patch --stdout HEAD~2 > patch5 && test_numbered patch5 diff --git a/t/t4026-color.sh b/t/t4026-color.sh index d5ccdd0cf8..3726a0e201 100755 --- a/t/t4026-color.sh +++ b/t/t4026-color.sh @@ -74,7 +74,6 @@ test_expect_success 'extra character after attribute' ' ' test_expect_success 'unknown color slots are ignored (diff)' ' - git config --unset diff.color.new git config color.diff.nosuchslotwilleverbedefined white && git diff --color ' diff --git a/t/t4027-diff-submodule.sh b/t/t4027-diff-submodule.sh index d99814ac64..241a74d2a2 100755 --- a/t/t4027-diff-submodule.sh +++ b/t/t4027-diff-submodule.sh @@ -316,11 +316,11 @@ test_expect_success 'git diff (empty submodule dir)' ' test_expect_success 'conflicted submodule setup' ' # 39 efs - c=fffffffffffffffffffffffffffffffffffffff + c=fffffffffffffffffffffffffffffffffffffff && ( - echo "000000 $_z40 0 sub" - echo "160000 1$c 1 sub" - echo "160000 2$c 2 sub" + echo "000000 $_z40 0 sub" && + echo "160000 1$c 1 sub" && + echo "160000 2$c 2 sub" && echo "160000 3$c 3 sub" ) | git update-index --index-info && echo >expect.nosub '\''diff --cc sub diff --git a/t/t4034-diff-words.sh b/t/t4034-diff-words.sh index 6f7548c3a1..8096d8a337 100755 --- a/t/t4034-diff-words.sh +++ b/t/t4034-diff-words.sh @@ -6,8 +6,8 @@ test_description='word diff colors' test_expect_success setup ' - git config diff.color.old red - git config diff.color.new green + git config diff.color.old red && + git config diff.color.new green && git config diff.color.func magenta ' @@ -35,10 +35,10 @@ aeff = aeff * ( aaa ) EOF cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> <RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> @@ -122,10 +122,10 @@ test_expect_success '--word-diff=plain --no-color' ' ' cat > expect <<EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> <RED>[-h(4)-]<RESET><GREEN>{+h(4),hh[44]+}<RESET> @@ -143,10 +143,10 @@ test_expect_success '--word-diff=plain --color' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> <RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> <CYAN>@@ -3,0 +4,4 @@<RESET> <RESET><MAGENTA>a = b + c<RESET> @@ -163,10 +163,10 @@ test_expect_success 'word diff without context' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4),<GREEN>hh<RESET>[44] @@ -199,10 +199,10 @@ test_expect_success 'option overrides .gitattributes' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4)<GREEN>,hh[44]<RESET> @@ -231,10 +231,10 @@ test_expect_success 'command-line overrides config' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4),<GREEN>{+hh+}<RESET>[44] @@ -260,10 +260,10 @@ test_expect_success 'remove diff driver regex' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4),<GREEN>hh[44<RESET>] @@ -282,10 +282,10 @@ echo 'aaa (aaa)' > pre echo 'aaa (aaa) aaa' > post cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index c29453b..be22f37 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index c29453b..be22f37 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> aaa (aaa) <GREEN>aaa<RESET> EOF @@ -301,10 +301,10 @@ echo '(:' > pre echo '(' > post cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 289cb9d..2d06f37 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 289cb9d..2d06f37 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> (<RED>:<RESET> EOF diff --git a/t/t4041-diff-submodule-option.sh b/t/t4041-diff-submodule-option.sh index 995bdfafec..bf9a7526bd 100755 --- a/t/t4041-diff-submodule-option.sh +++ b/t/t4041-diff-submodule-option.sh @@ -37,9 +37,10 @@ head1=$(add_file sm1 foo1 foo2) test_expect_success 'added submodule' " git add sm1 && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 0000000...$head1 (new submodule) EOF + test_cmp expected actual " commit_file sm1 && @@ -47,33 +48,36 @@ head2=$(add_file sm1 foo3) test_expect_success 'modified submodule(forward)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head1..$head2: > Add foo3 EOF + test_cmp expected actual " test_expect_success 'modified submodule(forward)' " git diff --submodule=log >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head1..$head2: > Add foo3 EOF + test_cmp expected actual " test_expect_success 'modified submodule(forward) --submodule' " git diff --submodule >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head1..$head2: > Add foo3 EOF + test_cmp expected actual " fullhead1=$(cd sm1; git rev-list --max-count=1 $head1) fullhead2=$(cd sm1; git rev-list --max-count=1 $head2) test_expect_success 'modified submodule(forward) --submodule=short' " git diff --submodule=short >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 index $head1..$head2 160000 --- a/sm1 @@ -82,6 +86,7 @@ index $head1..$head2 160000 -Subproject commit $fullhead1 +Subproject commit $fullhead2 EOF + test_cmp expected actual " commit_file sm1 && @@ -93,24 +98,26 @@ head3=$( test_expect_success 'modified submodule(backward)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head2..$head3 (rewind): < Add foo3 < Add foo2 EOF + test_cmp expected actual " head4=$(add_file sm1 foo4 foo5) && head4_full=$(GIT_DIR=sm1/.git git rev-parse --verify HEAD) test_expect_success 'modified submodule(backward and forward)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head2...$head4: > Add foo5 > Add foo4 < Add foo3 < Add foo2 EOF + test_cmp expected actual " commit_file sm1 && @@ -123,7 +130,7 @@ mv sm1-bak sm1 test_expect_success 'typechanged submodule(submodule->blob), --cached' " git diff --submodule=log --cached >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 41fbea9...0000000 (submodule deleted) diff --git a/sm1 b/sm1 new file mode 100644 @@ -133,11 +140,12 @@ index 0000000..9da5fb8 @@ -0,0 +1 @@ +sm1 EOF + test_cmp expected actual " test_expect_success 'typechanged submodule(submodule->blob)' " git diff --submodule=log >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 deleted file mode 100644 index 9da5fb8..0000000 @@ -147,13 +155,14 @@ index 9da5fb8..0000000 -sm1 Submodule sm1 0000000...$head4 (new submodule) EOF + test_cmp expected actual " rm -rf sm1 && git checkout-index sm1 test_expect_success 'typechanged submodule(submodule->blob)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head4...0000000 (submodule deleted) diff --git a/sm1 b/sm1 new file mode 100644 @@ -163,6 +172,7 @@ index 0000000..$head5 @@ -0,0 +1 @@ +sm1 EOF + test_cmp expected actual " rm -f sm1 && @@ -171,15 +181,16 @@ head6=$(add_file sm1 foo6 foo7) fullhead6=$(cd sm1; git rev-list --max-count=1 $head6) test_expect_success 'nonexistent commit' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head4...$head6 (commits not present) EOF + test_cmp expected actual " commit_file test_expect_success 'typechanged submodule(blob->submodule)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 deleted file mode 100644 index $head5..0000000 @@ -189,21 +200,24 @@ index $head5..0000000 -sm1 Submodule sm1 0000000...$head6 (new submodule) EOF + test_cmp expected actual " commit_file sm1 && test_expect_success 'submodule is up to date' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked content' " echo new > sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked content (untracked ignored)' " @@ -224,18 +238,20 @@ test_expect_success 'submodule contains untracked content (all ignored)' " test_expect_success 'submodule contains untracked and modifed content' " echo new > sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 contains modified content EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked and modifed content (untracked ignored)' " echo new > sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked and modifed content (dirty ignored)' " @@ -253,45 +269,50 @@ test_expect_success 'submodule contains untracked and modifed content (all ignor test_expect_success 'submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content EOF + test_cmp expected actual " (cd sm1; git commit -mchange foo6 >/dev/null) && head8=$(cd sm1; git rev-parse --verify HEAD | cut -c1-7) && test_expect_success 'submodule is modified' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content' " echo new > sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content (untracked ignored)' " git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content (dirty ignored)' " git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content (all ignored)' " @@ -302,31 +323,34 @@ test_expect_success 'modified submodule contains untracked content (all ignored) test_expect_success 'modified submodule contains untracked and modifed content' " echo modification >> sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 contains modified content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked and modifed content (untracked ignored)' " echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked and modifed content (dirty ignored)' " echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked and modifed content (all ignored)' " @@ -338,19 +362,21 @@ test_expect_success 'modified submodule contains untracked and modifed content ( test_expect_success 'modified submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " rm -rf sm1 test_expect_success 'deleted submodule' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) EOF + test_cmp expected actual " test_create_repo sm2 && @@ -359,41 +385,45 @@ git add sm2 test_expect_success 'multiple submodules' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " test_expect_success 'path filter' " git diff-index -p --submodule=log HEAD sm2 >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " commit_file sm2 test_expect_success 'given commit' " git diff-index -p --submodule=log HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " test_expect_success 'given commit --submodule' " git diff-index -p --submodule HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " fullhead7=$(cd sm2; git rev-list --max-count=1 $head7) test_expect_success 'given commit --submodule=short' " git diff-index -p --submodule=short HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 deleted file mode 160000 index $head6..0000000 @@ -409,6 +439,7 @@ index 0000000..$head7 @@ -0,0 +1 @@ +Subproject commit $fullhead7 EOF + test_cmp expected actual " test_expect_success 'setup .git file for sm2' ' @@ -420,10 +451,11 @@ test_expect_success 'setup .git file for sm2' ' test_expect_success 'diff --submodule with .git file' ' git diff --submodule HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual ' test_done diff --git a/t/t4103-apply-binary.sh b/t/t4103-apply-binary.sh index 9692f16f35..dbbf56cba9 100755 --- a/t/t4103-apply-binary.sh +++ b/t/t4103-apply-binary.sh @@ -37,15 +37,24 @@ test_expect_success 'setup' " git diff-tree -p -C master binary >C.diff && git diff-tree -p --binary master binary >BF.diff && - git diff-tree -p --binary -C master binary >CF.diff + git diff-tree -p --binary -C master binary >CF.diff && + + git diff-tree -p --full-index master binary >B-index.diff && + git diff-tree -p -C --full-index master binary >C-index.diff && + + git init other-repo && + (cd other-repo && + git fetch .. master && + git reset --hard FETCH_HEAD + ) " test_expect_success 'stat binary diff -- should not fail.' \ - 'git checkout master + 'git checkout master && git apply --stat --summary B.diff' test_expect_success 'stat binary diff (copy) -- should not fail.' \ - 'git checkout master + 'git checkout master && git apply --stat --summary C.diff' test_expect_success 'check binary diff -- should fail.' \ @@ -69,11 +78,11 @@ test_expect_success \ ' test_expect_success 'check binary diff with replacement.' \ - 'git checkout master + 'git checkout master && git apply --check --allow-binary-replacement BF.diff' test_expect_success 'check binary diff with replacement (copy).' \ - 'git checkout master + 'git checkout master && git apply --check --allow-binary-replacement CF.diff' # Now we start applying them. @@ -100,6 +109,22 @@ test_expect_success 'apply binary diff (copy) -- should fail.' \ 'do_reset && test_must_fail git apply --index C.diff' +test_expect_success 'apply binary diff with full-index' ' + do_reset && + git apply B-index.diff +' + +test_expect_success 'apply binary diff with full-index (copy)' ' + do_reset && + git apply C-index.diff +' + +test_expect_success 'apply full-index binary diff in new repo' ' + (cd other-repo && + do_reset && + test_must_fail git apply ../B-index.diff) +' + test_expect_success 'apply binary diff without replacement.' \ 'do_reset && git apply BF.diff' diff --git a/t/t4111-apply-subdir.sh b/t/t4111-apply-subdir.sh index a52d94ae21..7c398432ba 100755 --- a/t/t4111-apply-subdir.sh +++ b/t/t4111-apply-subdir.sh @@ -89,7 +89,7 @@ test_expect_success 'apply --index from subdir of toplevel' ' test_expect_success 'apply from .git dir' ' cp postimage expected && cp preimage .git/file && - cp preimage .git/objects/file + cp preimage .git/objects/file && ( cd .git && git apply "$patch" @@ -100,7 +100,7 @@ test_expect_success 'apply from .git dir' ' test_expect_success 'apply from subdir of .git dir' ' cp postimage expected && cp preimage .git/file && - cp preimage .git/objects/file + cp preimage .git/objects/file && ( cd .git/objects && git apply "$patch" diff --git a/t/t4119-apply-config.sh b/t/t4119-apply-config.sh index 3c73a783a7..3d0384daa8 100755 --- a/t/t4119-apply-config.sh +++ b/t/t4119-apply-config.sh @@ -73,7 +73,7 @@ D=`pwd` test_expect_success 'apply --whitespace=strip in subdir' ' cd "$D" && - git config --unset-all apply.whitespace + git config --unset-all apply.whitespace && rm -f sub/file1 && cp saved sub/file1 && git update-index --refresh && diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index 8a676a5dcd..61bfc569c3 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -176,9 +176,8 @@ test_expect_success 'trailing whitespace & no newline at the end of file' ' ' test_expect_success 'blank at EOF with --whitespace=fix (1)' ' - : these can fail depending on what we did before - git config --unset core.whitespace - rm -f .gitattributes + test_might_fail git config --unset core.whitespace && + rm -f .gitattributes && { echo a; echo b; echo c; } >one && git add one && @@ -368,7 +367,7 @@ test_expect_success 'missing blanks at EOF must only match blank lines' ' git diff -- one >patch && echo a >one && - test_must_fail git apply patch + test_must_fail git apply patch && test_must_fail git apply --whitespace=fix patch && test_must_fail git apply --ignore-space-change --whitespace=fix patch ' @@ -419,7 +418,7 @@ test_expect_success 'same, but with CR-LF line endings && cr-at-eol set' ' printf "b\r\n" >>one && printf "c\r\n" >>one && cp one save-one && - printf " \r\n" >>one + printf " \r\n" >>one && git add one && printf "d\r\n" >>one && cp one expect && @@ -436,7 +435,7 @@ test_expect_success 'same, but with CR-LF line endings && cr-at-eol unset' ' printf "b\r\n" >>one && printf "c\r\n" >>one && cp one save-one && - printf " \r\n" >>one + printf " \r\n" >>one && git add one && cp one expect && printf "d\r\n" >>one && diff --git a/t/t4127-apply-same-fn.sh b/t/t4127-apply-same-fn.sh index 77200c0b2d..972946c174 100755 --- a/t/t4127-apply-same-fn.sh +++ b/t/t4127-apply-same-fn.sh @@ -31,7 +31,7 @@ test_expect_success 'apply same filename with independent changes' ' ' test_expect_success 'apply same filename with overlapping changes' ' - git reset --hard + git reset --hard && modify "s/^d/z/" same_fn && git diff > patch0 && git add same_fn && @@ -44,8 +44,8 @@ test_expect_success 'apply same filename with overlapping changes' ' ' test_expect_success 'apply same new filename after rename' ' - git reset --hard - git mv same_fn new_fn + git reset --hard && + git mv same_fn new_fn && modify "s/^d/z/" new_fn && git add new_fn && git diff -M --cached > patch1 && @@ -58,12 +58,12 @@ test_expect_success 'apply same new filename after rename' ' ' test_expect_success 'apply same old filename after rename -- should fail.' ' - git reset --hard - git mv same_fn new_fn + git reset --hard && + git mv same_fn new_fn && modify "s/^d/z/" new_fn && git add new_fn && git diff -M --cached > patch1 && - git mv new_fn same_fn + git mv new_fn same_fn && modify "s/^e/y/" same_fn && git diff >> patch1 && git reset --hard && @@ -71,13 +71,13 @@ test_expect_success 'apply same old filename after rename -- should fail.' ' ' test_expect_success 'apply A->B (rename), C->A (rename), A->A -- should pass.' ' - git reset --hard - git mv same_fn new_fn + git reset --hard && + git mv same_fn new_fn && modify "s/^d/z/" new_fn && git add new_fn && git diff -M --cached > patch1 && git commit -m "a rename" && - git mv other_fn same_fn + git mv other_fn same_fn && modify "s/^e/y/" same_fn && git add same_fn && git diff -M --cached >> patch1 && diff --git a/t/t4130-apply-criss-cross-rename.sh b/t/t4130-apply-criss-cross-rename.sh index 7cfa2d6287..d173acde0f 100755 --- a/t/t4130-apply-criss-cross-rename.sh +++ b/t/t4130-apply-criss-cross-rename.sh @@ -44,7 +44,7 @@ test_expect_success 'criss-cross rename' ' git reset --hard && mv file1 tmp && mv file2 file1 && - mv file3 file2 + mv file3 file2 && mv tmp file3 && cp file1 file1-swapped && cp file2 file2-swapped && diff --git a/t/t4133-apply-filenames.sh b/t/t4133-apply-filenames.sh index 34218071b6..94da99075c 100755 --- a/t/t4133-apply-filenames.sh +++ b/t/t4133-apply-filenames.sh @@ -8,7 +8,7 @@ test_description='git apply filename consistency check' . ./test-lib.sh test_expect_success setup ' - cat > bad1.patch <<EOF + cat > bad1.patch <<EOF && diff --git a/f b/f new file mode 100644 index 0000000..d00491f @@ -29,9 +29,9 @@ EOF ' test_expect_success 'apply diff with inconsistent filenames in headers' ' - test_must_fail git apply bad1.patch 2>err - grep "inconsistent new filename" err - test_must_fail git apply bad2.patch 2>err + test_must_fail git apply bad1.patch 2>err && + grep "inconsistent new filename" err && + test_must_fail git apply bad2.patch 2>err && grep "inconsistent old filename" err ' diff --git a/t/t4134-apply-submodule.sh b/t/t4134-apply-submodule.sh index 1b82f93cff..0043930ca6 100755 --- a/t/t4134-apply-submodule.sh +++ b/t/t4134-apply-submodule.sh @@ -8,7 +8,7 @@ test_description='git apply submodule tests' . ./test-lib.sh test_expect_success setup ' - cat > create-sm.patch <<EOF + cat > create-sm.patch <<EOF && diff --git a/dir/sm b/dir/sm new file mode 160000 index 0000000..0123456 diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 1c3d8ed548..850fc96d1f 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -219,7 +219,7 @@ test_expect_success 'am stays in branch' ' test_expect_success 'am --signoff does not add Signed-off-by: line if already there' ' git format-patch --stdout HEAD^ >patch3 && - sed -e "/^Subject/ s,\[PATCH,Re: Re: Re: & 1/5 v2," patch3 >patch4 + sed -e "/^Subject/ s,\[PATCH,Re: Re: Re: & 1/5 v2," patch3 >patch4 && rm -fr .git/rebase-apply && git reset --hard && git checkout HEAD^ && diff --git a/t/t4201-shortlog.sh b/t/t4201-shortlog.sh index cdb70b4b33..6872ba1a42 100755 --- a/t/t4201-shortlog.sh +++ b/t/t4201-shortlog.sh @@ -35,7 +35,7 @@ test_expect_success 'setup' ' tr 1234 "\370\235\204\236")" a1 && echo 5 >a1 && - git commit --quiet -m "a 12 34 56 78" a1 + git commit --quiet -m "a 12 34 56 78" a1 && echo 6 >a1 && git commit --quiet -m "Commit by someone else" \ diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 2e51356947..a8c33d5703 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -191,7 +191,7 @@ test_expect_success 'git show <commits> leaves list of commits as given' ' test_expect_success 'setup case sensitivity tests' ' echo case >one && test_tick && - git add one + git add one && git commit -a -m Second ' @@ -341,7 +341,7 @@ test_expect_success 'set up more tangled history' ' test_commit octopus-b && git checkout master && test_commit seventh && - git merge octopus-a octopus-b + git merge octopus-a octopus-b && git merge reach ' @@ -393,7 +393,7 @@ test_expect_success 'log --graph with merge' ' ' test_expect_success 'log.decorate configuration' ' - git config --unset-all log.decorate || : + test_might_fail git config --unset-all log.decorate && git log --oneline >expect.none && git log --oneline --decorate >expect.short && diff --git a/t/t4203-mailmap.sh b/t/t4203-mailmap.sh index 9a7d1b4466..e818de6ddd 100755 --- a/t/t4203-mailmap.sh +++ b/t/t4203-mailmap.sh @@ -4,6 +4,14 @@ test_description='.mailmap configurations' . ./test-lib.sh +fuzz_blame () { + sed " + s/$_x05[0-9a-f][0-9a-f][0-9a-f]/OBJID/g + s/$_x05[0-9a-f][0-9a-f]/OBJI/g + s/[-0-9]\{10\} [:0-9]\{8\} [-+][0-9]\{4\}/DATE/g + " "$@" +} + test_expect_success setup ' echo one >one && git add one && @@ -11,6 +19,7 @@ test_expect_success setup ' git commit -m initial && echo two >>one && git add one && + test_tick && git commit --author "nick1 <bugs@company.xx>" -m second ' @@ -54,7 +63,7 @@ Repo Guy (1): EOF test_expect_success 'mailmap.file set' ' - mkdir internal_mailmap && + mkdir -p internal_mailmap && echo "Internal Guy <bugs@company.xx>" > internal_mailmap/.mailmap && git config mailmap.file internal_mailmap/.mailmap && git shortlog HEAD >actual && @@ -93,6 +102,40 @@ test_expect_success 'mailmap.file non-existant' ' ' cat >expect <<\EOF +Internal Guy (1): + second + +Repo Guy (1): + initial + +EOF + +test_expect_success 'name entry after email entry' ' + mkdir -p internal_mailmap && + echo "<bugs@company.xy> <bugs@company.xx>" >internal_mailmap/.mailmap && + echo "Internal Guy <bugs@company.xx>" >>internal_mailmap/.mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF +Internal Guy (1): + second + +Repo Guy (1): + initial + +EOF + +test_expect_success 'name entry after email entry, case-insensitive' ' + mkdir -p internal_mailmap && + echo "<bugs@company.xy> <bugs@company.xx>" >internal_mailmap/.mailmap && + echo "Internal Guy <BUGS@Company.xx>" >>internal_mailmap/.mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF A U Thor (1): initial @@ -101,7 +144,7 @@ nick1 (1): EOF test_expect_success 'No mailmap files, but configured' ' - rm .mailmap && + rm -f .mailmap internal_mailmap/.mailmap && git shortlog HEAD >actual && test_cmp expect actual ' @@ -153,7 +196,7 @@ test_expect_success 'Shortlog output (complex mapping)' ' test_tick && git commit --author "CTO <cto@coompany.xx>" -m seventh && - mkdir internal_mailmap && + mkdir -p internal_mailmap && echo "Committed <committer@example.com>" > internal_mailmap/.mailmap && echo "<cto@company.xx> <cto@coompany.xx>" >> internal_mailmap/.mailmap && echo "Some Dude <some@dude.xx> nick1 <bugs@company.xx>" >> internal_mailmap/.mailmap && @@ -198,18 +241,18 @@ test_expect_success 'Log output (complex mapping)' ' # git blame cat >expect <<\EOF -^3a2fdcb (A U Thor 2005-04-07 15:13:13 -0700 1) one -7de6f99b (Some Dude 2005-04-07 15:13:13 -0700 2) two -5815879d (Other Author 2005-04-07 15:14:13 -0700 3) three -ff859d96 (Other Author 2005-04-07 15:15:13 -0700 4) four -5ab6d4fa (Santa Claus 2005-04-07 15:16:13 -0700 5) five -38a42d8b (Santa Claus 2005-04-07 15:17:13 -0700 6) six -8ddc0386 (CTO 2005-04-07 15:18:13 -0700 7) seven +^OBJI (A U Thor DATE 1) one +OBJID (Some Dude DATE 2) two +OBJID (Other Author DATE 3) three +OBJID (Other Author DATE 4) four +OBJID (Santa Claus DATE 5) five +OBJID (Santa Claus DATE 6) six +OBJID (CTO DATE 7) seven EOF - test_expect_success 'Blame output (complex mapping)' ' git blame one >actual && - test_cmp expect actual + fuzz_blame actual >actual.fuzz && + test_cmp expect actual.fuzz ' test_done diff --git a/t/t4252-am-options.sh b/t/t4252-am-options.sh index f603c1b133..e758e634a3 100755 --- a/t/t4252-am-options.sh +++ b/t/t4252-am-options.sh @@ -59,7 +59,7 @@ test_expect_success 'interrupted am --directory="frotz nitfol"' ' ' test_expect_success 'apply to a funny path' ' - with_sq="with'\''sq" + with_sq="with'\''sq" && rm -fr .git/rebase-apply && git reset --hard initial && git am --directory="$with_sq" "$tm"/am-test-5-2 && diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 27bfba55bd..cff1b3e050 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -94,7 +94,7 @@ test_expect_success 'git archive with --output' \ 'git archive --output=b4.tar HEAD && test_cmp b.tar b4.tar' -test_expect_success 'git archive --remote' \ +test_expect_success NOT_MINGW 'git archive --remote' \ 'git archive --remote=. HEAD >b5.tar && test_cmp b.tar b5.tar' diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index bbb9c1251d..602806d09c 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -12,7 +12,7 @@ TRASH=`pwd` test_expect_success \ 'setup' \ - 'rm -f .git/index* + 'rm -f .git/index* && perl -e "print \"a\" x 4096;" > a && perl -e "print \"b\" x 4096;" > b && perl -e "print \"c\" x 4096;" > c && diff --git a/t/t5301-sliding-window.sh b/t/t5301-sliding-window.sh index 0a24e61ff9..2fc5af6007 100755 --- a/t/t5301-sliding-window.sh +++ b/t/t5301-sliding-window.sh @@ -8,7 +8,7 @@ test_description='mmap sliding window tests' test_expect_success \ 'setup' \ - 'rm -f .git/index* + 'rm -f .git/index* && for i in a b c do echo $i >$i && @@ -48,7 +48,7 @@ test_expect_success \ git repack -a -d && test "`git count-objects`" = "0 objects, 0 kilobytes" && pack2=`ls .git/objects/pack/*.pack` && - test -f "$pack2" + test -f "$pack2" && test "$pack1" \!= "$pack2"' test_expect_success \ diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index fb3a270822..b34ea93a80 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -8,7 +8,7 @@ test_description='pack index with 64-bit offsets and object CRC' test_expect_success \ 'setup' \ - 'rm -rf .git + 'rm -rf .git && git init && git config pack.threads 1 && i=1 && diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index 5bcf0b867a..b0b2684a1f 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -129,7 +129,7 @@ test_expect_success 'denyNonFastforwards trumps --force' ' test "$victim_orig" = "$victim_head" ' -test_expect_success 'push --all excludes remote tracking hierarchy' ' +test_expect_success 'push --all excludes remote-tracking hierarchy' ' mkdir parent && ( cd parent && diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 18376d6608..bafcca765e 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -91,7 +91,7 @@ test_expect_success 'setup' ' prev=$cur && cur=$(($cur+1)) done && - add B1 $A1 + add B1 $A1 && echo $ATIP > .git/refs/heads/A && echo $BTIP > .git/refs/heads/B && git symbolic-ref HEAD refs/heads/B diff --git a/t/t5502-quickfetch.sh b/t/t5502-quickfetch.sh index 1037a723fe..7a46cbdbe6 100755 --- a/t/t5502-quickfetch.sh +++ b/t/t5502-quickfetch.sh @@ -57,7 +57,7 @@ test_expect_success 'copy commit and tree but not blob by hand' ' cd cloned && git count-objects | sed -e "s/ *objects,.*//" ) ) && - test $cnt -eq 6 + test $cnt -eq 6 && blob=$(git rev-parse HEAD:file | sed -e "s|..|&/|") && test -f "cloned/.git/objects/$blob" && diff --git a/t/t5503-tagfollow.sh b/t/t5503-tagfollow.sh index 8a298a655f..60de2d6ede 100755 --- a/t/t5503-tagfollow.sh +++ b/t/t5503-tagfollow.sh @@ -4,14 +4,9 @@ test_description='test automatic tag following' . ./test-lib.sh -case $(uname -s) in -*MINGW*) +if ! test_have_prereq NOT_MINGW; then say "GIT_DEBUG_SEND_PACK not supported - skipping tests" - ;; -*) - test_set_prereq NOT_MINGW - ;; -esac +fi # End state of the repository: # @@ -54,7 +49,7 @@ EOF ' test_expect_success NOT_MINGW 'fetch A (new commit : 1 connection)' ' - rm -f $U + rm -f $U && ( cd cloned && GIT_DEBUG_SEND_PACK=3 git fetch 3>../$U && @@ -87,7 +82,7 @@ EOF ' test_expect_success NOT_MINGW 'fetch C, T (new branch, tag : 1 connection)' ' - rm -f $U + rm -f $U && ( cd cloned && GIT_DEBUG_SEND_PACK=3 git fetch 3>../$U && @@ -126,7 +121,7 @@ EOF ' test_expect_success NOT_MINGW 'fetch B, S (commit and tag : 1 connection)' ' - rm -f $U + rm -f $U && ( cd cloned && GIT_DEBUG_SEND_PACK=3 git fetch 3>../$U && diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index 5d1c66ea71..d189add2d0 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -107,16 +107,18 @@ test_expect_success 'remove remote' ' ) ' -test_expect_success 'remove remote protects non-remote branches' ' +test_expect_success 'remove remote protects local branches' ' ( cd test && { cat >expect1 <<EOF -Note: A non-remote branch was not removed; to delete it, use: +Note: A branch outside the refs/remotes/ hierarchy was not removed; +to delete it, use: git branch -d master EOF } && { cat >expect2 <<EOF -Note: Non-remote branches were not removed; to delete them, use: +Note: Some branches outside the refs/remotes/ hierarchy were not removed; +to delete them, use: git branch -d foobranch git branch -d master EOF diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 9a884751ec..7e433b179f 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -119,7 +119,7 @@ test_expect_success 'fetch must not resolve short tag name' ' test_expect_success 'fetch must not resolve short remote name' ' cd "$D" && - git update-ref refs/remotes/six/HEAD HEAD + git update-ref refs/remotes/six/HEAD HEAD && mkdir six && cd six && diff --git a/t/t5513-fetch-track.sh b/t/t5513-fetch-track.sh index 9e7486274b..65d1e05bd6 100755 --- a/t/t5513-fetch-track.sh +++ b/t/t5513-fetch-track.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='fetch follows remote tracking branches correctly' +test_description='fetch follows remote-tracking branches correctly' . ./test-lib.sh diff --git a/t/t5514-fetch-multiple.sh b/t/t5514-fetch-multiple.sh index b73733219d..227dd56137 100755 --- a/t/t5514-fetch-multiple.sh +++ b/t/t5514-fetch-multiple.sh @@ -27,7 +27,7 @@ test_expect_success setup ' ( cd two && git branch another ) && - git clone --mirror two three + git clone --mirror two three && git clone one test ' diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index b11da79c9c..d73731e644 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -586,7 +586,7 @@ test_expect_success 'push --delete refuses src:dest refspecs' ' ' test_expect_success 'warn on push to HEAD of non-bare repository' ' - mk_test heads/master + mk_test heads/master && ( cd testrepo && git checkout master && @@ -597,7 +597,7 @@ test_expect_success 'warn on push to HEAD of non-bare repository' ' ' test_expect_success 'deny push to HEAD of non-bare repository' ' - mk_test heads/master + mk_test heads/master && ( cd testrepo && git checkout master && @@ -607,7 +607,7 @@ test_expect_success 'deny push to HEAD of non-bare repository' ' ' test_expect_success 'allow push to HEAD of bare repository (bare)' ' - mk_test heads/master + mk_test heads/master && ( cd testrepo && git checkout master && @@ -619,7 +619,7 @@ test_expect_success 'allow push to HEAD of bare repository (bare)' ' ' test_expect_success 'allow push to HEAD of non-bare repository (config)' ' - mk_test heads/master + mk_test heads/master && ( cd testrepo && git checkout master && diff --git a/t/t5519-push-alternates.sh b/t/t5519-push-alternates.sh index 96be5236a2..c00c9b071d 100755 --- a/t/t5519-push-alternates.sh +++ b/t/t5519-push-alternates.sh @@ -123,7 +123,7 @@ test_expect_success 'bob works and pushes again' ' ( cd alice-pub && git cat-file commit master >../bob-work/commit - ) + ) && ( # This time Bob does not pull from Alice, and # the master branch at her public repository points diff --git a/t/t5523-push-upstream.sh b/t/t5523-push-upstream.sh index 00da70763b..c229fe68f1 100755 --- a/t/t5523-push-upstream.sh +++ b/t/t5523-push-upstream.sh @@ -2,9 +2,14 @@ test_description='push with --set-upstream' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-terminal.sh + +ensure_fresh_upstream() { + rm -rf parent && git init --bare parent +} test_expect_success 'setup bare parent' ' - git init --bare parent && + ensure_fresh_upstream && git remote add upstream parent ' @@ -66,4 +71,41 @@ test_expect_success 'push -u HEAD' ' check_config headbranch upstream refs/heads/headbranch ' +test_expect_success TTY 'progress messages go to tty' ' + ensure_fresh_upstream && + + test_terminal git push -u upstream master >out 2>err && + grep "Writing objects" err +' + +test_expect_success 'progress messages do not go to non-tty' ' + ensure_fresh_upstream && + + # skip progress messages, since stderr is non-tty + git push -u upstream master >out 2>err && + ! grep "Writing objects" err +' + +test_expect_success 'progress messages go to non-tty (forced)' ' + ensure_fresh_upstream && + + # force progress messages to stderr, even though it is non-tty + git push -u --progress upstream master >out 2>err && + grep "Writing objects" err +' + +test_expect_success TTY 'push -q suppresses progress' ' + ensure_fresh_upstream && + + test_terminal git push -u -q upstream master >out 2>err && + ! grep "Writing objects" err +' + +test_expect_failure TTY 'push --no-progress suppresses progress' ' + ensure_fresh_upstream && + + test_terminal git push -u --no-progress upstream master >out 2>err && + ! grep "Writing objects" err +' + test_done diff --git a/t/t5531-deep-submodule-push.sh b/t/t5531-deep-submodule-push.sh index 65d8d474bc..faa2e96337 100755 --- a/t/t5531-deep-submodule-push.sh +++ b/t/t5531-deep-submodule-push.sh @@ -6,7 +6,7 @@ test_description='unpack-objects' test_expect_success setup ' mkdir pub.git && - GIT_DIR=pub.git git init --bare + GIT_DIR=pub.git git init --bare && GIT_DIR=pub.git git config receive.fsckobjects true && mkdir work && ( diff --git a/t/t5560-http-backend-noserver.sh b/t/t5560-http-backend-noserver.sh index 94f9d2e8e0..0ad7ce07c4 100755 --- a/t/t5560-http-backend-noserver.sh +++ b/t/t5560-http-backend-noserver.sh @@ -5,11 +5,12 @@ test_description='test git-http-backend-noserver' HTTPD_DOCUMENT_ROOT_PATH="$TRASH_DIRECTORY" +test_have_prereq MINGW && export GREP_OPTIONS=-U + run_backend() { echo "$2" | QUERY_STRING="${1#*\?}" \ - GIT_PROJECT_ROOT="$HTTPD_DOCUMENT_ROOT_PATH" \ - PATH_INFO="${1%%\?*}" \ + PATH_TRANSLATED="$HTTPD_DOCUMENT_ROOT_PATH/${1%%\?*}" \ git http-backend >act.out 2>act.err } diff --git a/t/t556x_common b/t/t556x_common index 51287d89d8..82926cfdb7 100755 --- a/t/t556x_common +++ b/t/t556x_common @@ -52,21 +52,21 @@ get_static_files() { SMART=smart GIT_HTTP_EXPORT_ALL=1 && export GIT_HTTP_EXPORT_ALL test_expect_success 'direct refs/heads/master not found' ' - log_div "refs/heads/master" + log_div "refs/heads/master" && GET refs/heads/master "404 Not Found" ' test_expect_success 'static file is ok' ' - log_div "getanyfile default" + log_div "getanyfile default" && get_static_files "200 OK" ' SMART=smart_noexport unset GIT_HTTP_EXPORT_ALL test_expect_success 'no export by default' ' - log_div "no git-daemon-export-ok" + log_div "no git-daemon-export-ok" && get_static_files "404 Not Found" ' test_expect_success 'export if git-daemon-export-ok' ' - log_div "git-daemon-export-ok" + log_div "git-daemon-export-ok" && (cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && touch git-daemon-export-ok ) && @@ -75,47 +75,47 @@ test_expect_success 'export if git-daemon-export-ok' ' SMART=smart GIT_HTTP_EXPORT_ALL=1 && export GIT_HTTP_EXPORT_ALL test_expect_success 'static file if http.getanyfile true is ok' ' - log_div "getanyfile true" + log_div "getanyfile true" && config http.getanyfile true && get_static_files "200 OK" ' test_expect_success 'static file if http.getanyfile false fails' ' - log_div "getanyfile false" + log_div "getanyfile false" && config http.getanyfile false && get_static_files "403 Forbidden" ' test_expect_success 'http.uploadpack default enabled' ' - log_div "uploadpack default" + log_div "uploadpack default" && GET info/refs?service=git-upload-pack "200 OK" && POST git-upload-pack 0000 "200 OK" ' test_expect_success 'http.uploadpack true' ' - log_div "uploadpack true" + log_div "uploadpack true" && config http.uploadpack true && GET info/refs?service=git-upload-pack "200 OK" && POST git-upload-pack 0000 "200 OK" ' test_expect_success 'http.uploadpack false' ' - log_div "uploadpack false" + log_div "uploadpack false" && config http.uploadpack false && GET info/refs?service=git-upload-pack "403 Forbidden" && POST git-upload-pack 0000 "403 Forbidden" ' test_expect_success 'http.receivepack default disabled' ' - log_div "receivepack default" + log_div "receivepack default" && GET info/refs?service=git-receive-pack "403 Forbidden" && POST git-receive-pack 0000 "403 Forbidden" ' test_expect_success 'http.receivepack true' ' - log_div "receivepack true" + log_div "receivepack true" && config http.receivepack true && GET info/refs?service=git-receive-pack "200 OK" && POST git-receive-pack 0000 "200 OK" ' test_expect_success 'http.receivepack false' ' - log_div "receivepack false" + log_div "receivepack false" && config http.receivepack false && GET info/refs?service=git-receive-pack "403 Forbidden" && POST git-receive-pack 0000 "403 Forbidden" diff --git a/t/t5602-clone-remote-exec.sh b/t/t5602-clone-remote-exec.sh index deffdaee49..3f353d99e8 100755 --- a/t/t5602-clone-remote-exec.sh +++ b/t/t5602-clone-remote-exec.sh @@ -5,21 +5,29 @@ test_description=clone . ./test-lib.sh test_expect_success setup ' - echo "#!/bin/sh" > not_ssh - echo "echo \"\$*\" > not_ssh_output" >> not_ssh - echo "exit 1" >> not_ssh + echo "#!/bin/sh" > not_ssh && + echo "echo \"\$*\" > not_ssh_output" >> not_ssh && + echo "exit 1" >> not_ssh && chmod +x not_ssh ' test_expect_success 'clone calls git upload-pack unqualified with no -u option' ' - GIT_SSH=./not_ssh git clone localhost:/path/to/repo junk - echo "localhost git-upload-pack '\''/path/to/repo'\''" >expected + ( + GIT_SSH=./not_ssh && + export GIT_SSH && + test_must_fail git clone localhost:/path/to/repo junk + ) && + echo "localhost git-upload-pack '\''/path/to/repo'\''" >expected && test_cmp expected not_ssh_output ' test_expect_success 'clone calls specified git upload-pack with -u option' ' - GIT_SSH=./not_ssh git clone -u ./something/bin/git-upload-pack localhost:/path/to/repo junk - echo "localhost ./something/bin/git-upload-pack '\''/path/to/repo'\''" >expected + ( + GIT_SSH=./not_ssh && + export GIT_SSH && + test_must_fail git clone -u ./something/bin/git-upload-pack localhost:/path/to/repo junk + ) && + echo "localhost ./something/bin/git-upload-pack '\''/path/to/repo'\''" >expected && test_cmp expected not_ssh_output ' diff --git a/t/t5701-clone-local.sh b/t/t5701-clone-local.sh index 8b4c356cd2..0f4d487be3 100755 --- a/t/t5701-clone-local.sh +++ b/t/t5701-clone-local.sh @@ -10,11 +10,11 @@ test_expect_success 'preparing origin repository' ' git clone --bare . a.git && git clone --bare . x && test "$(GIT_CONFIG=a.git/config git config --bool core.bare)" = true && - test "$(GIT_CONFIG=x/config git config --bool core.bare)" = true + test "$(GIT_CONFIG=x/config git config --bool core.bare)" = true && git bundle create b1.bundle --all && git bundle create b2.bundle master && mkdir dir && - cp b1.bundle dir/b3 + cp b1.bundle dir/b3 && cp b1.bundle b4 ' @@ -112,7 +112,7 @@ test_expect_success 'bundle clone with nonexistent HEAD' ' cd "$D" && git clone b2.bundle b2 && cd b2 && - git fetch + git fetch && test ! -e .git/refs/heads/master ' diff --git a/t/t6001-rev-list-graft.sh b/t/t6001-rev-list-graft.sh index fc57e7d3fd..8efcd13079 100755 --- a/t/t6001-rev-list-graft.sh +++ b/t/t6001-rev-list-graft.sh @@ -90,22 +90,22 @@ check () { for type in basic parents parents-raw do test_expect_success 'without grafts' " - rm -f .git/info/grafts + rm -f .git/info/grafts && check $type $B2 -- $B2 $B1 $B0 " test_expect_success 'with grafts' " - echo '$B0 $A2' >.git/info/grafts + echo '$B0 $A2' >.git/info/grafts && check $type $B2 -- $B2 $B1 $B0 $A2 $A1 $A0 " test_expect_success 'without grafts, with pathlimit' " - rm -f .git/info/grafts + rm -f .git/info/grafts && check $type $B2 subdir -- $B2 $B0 " test_expect_success 'with grafts, with pathlimit' " - echo '$B0 $A2' >.git/info/grafts + echo '$B0 $A2' >.git/info/grafts && check $type $B2 subdir -- $B2 $B0 $A2 $A0 " diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index cccacd4add..d918cc02d0 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -162,6 +162,14 @@ commit 131a310eb913d107dd3c09a65d1651175898735d commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873 EOF +test_expect_success '%x00 shows NUL' ' + echo >expect commit f58db70b055c5718631e5c61528b28b12090cdea && + echo >>expect fooQbar && + git rev-list -1 --format=foo%x00bar HEAD >actual.nul && + nul_to_q <actual.nul >actual && + test_cmp expect actual +' + test_expect_success '%ad respects --date=' ' echo 2005-04-07 >expect.ad-short && git log -1 --date=short --pretty=tformat:%ad >output.ad-short master && diff --git a/t/t6009-rev-list-parent.sh b/t/t6009-rev-list-parent.sh index c8a96a9a99..52f7b277ce 100755 --- a/t/t6009-rev-list-parent.sh +++ b/t/t6009-rev-list-parent.sh @@ -18,7 +18,7 @@ test_expect_success setup ' commit one && - test_tick=$(($test_tick - 2400)) + test_tick=$(($test_tick - 2400)) && commit two && commit three && diff --git a/t/t6010-merge-base.sh b/t/t6010-merge-base.sh index 62197a3d35..082032edc3 100755 --- a/t/t6010-merge-base.sh +++ b/t/t6010-merge-base.sh @@ -131,7 +131,7 @@ test_expect_success 'unsynchronized clocks' ' R2=$(doit 3 R2 $R1) && PL=$(doit 4 PL $L2 $C2) && - PR=$(doit 4 PR $C2 $R2) + PR=$(doit 4 PR $C2 $R2) && git name-rev $C2 >expected && diff --git a/t/t6016-rev-list-graph-simplify-history.sh b/t/t6016-rev-list-graph-simplify-history.sh index 27fd52b7be..f7181d1d6a 100755 --- a/t/t6016-rev-list-graph-simplify-history.sh +++ b/t/t6016-rev-list-graph-simplify-history.sh @@ -29,7 +29,7 @@ test_expect_success 'set up rev-list --graph test' ' # Octopus merge B and C into branch A git checkout A && git merge B C && - git tag A4 + git tag A4 && test_commit A5 bar.txt && @@ -39,7 +39,7 @@ test_expect_success 'set up rev-list --graph test' ' test_commit C4 bar.txt && git checkout A && git merge -s ours C && - git tag A6 + git tag A6 && test_commit A7 bar.txt && @@ -90,7 +90,7 @@ test_expect_success '--graph --all' ' # that undecorated merges are interesting, even with --simplify-by-decoration test_expect_success '--graph --simplify-by-decoration' ' rm -f expected && - git tag -d A4 + git tag -d A4 && echo "* $A7" >> expected && echo "* $A6" >> expected && echo "|\\ " >> expected && @@ -116,12 +116,15 @@ test_expect_success '--graph --simplify-by-decoration' ' test_cmp expected actual ' -# Get rid of all decorations on branch B, and graph with it simplified away +test_expect_success 'setup: get rid of decorations on B' ' + git tag -d B2 && + git tag -d B1 && + git branch -d B +' + +# Graph with branch B simplified away test_expect_success '--graph --simplify-by-decoration prune branch B' ' rm -f expected && - git tag -d B2 - git tag -d B1 - git branch -d B echo "* $A7" >> expected && echo "* $A6" >> expected && echo "|\\ " >> expected && @@ -143,9 +146,6 @@ test_expect_success '--graph --simplify-by-decoration prune branch B' ' test_expect_success '--graph --full-history -- bar.txt' ' rm -f expected && - git tag -d B2 - git tag -d B1 - git branch -d B echo "* $A7" >> expected && echo "* $A6" >> expected && echo "|\\ " >> expected && @@ -163,9 +163,6 @@ test_expect_success '--graph --full-history -- bar.txt' ' test_expect_success '--graph --full-history --simplify-merges -- bar.txt' ' rm -f expected && - git tag -d B2 - git tag -d B1 - git branch -d B echo "* $A7" >> expected && echo "* $A6" >> expected && echo "|\\ " >> expected && @@ -181,9 +178,6 @@ test_expect_success '--graph --full-history --simplify-merges -- bar.txt' ' test_expect_success '--graph -- bar.txt' ' rm -f expected && - git tag -d B2 - git tag -d B1 - git branch -d B echo "* $A7" >> expected && echo "* $A5" >> expected && echo "* $A3" >> expected && @@ -196,9 +190,6 @@ test_expect_success '--graph -- bar.txt' ' test_expect_success '--graph --sparse -- bar.txt' ' rm -f expected && - git tag -d B2 - git tag -d B1 - git branch -d B echo "* $A7" >> expected && echo "* $A6" >> expected && echo "* $A5" >> expected && diff --git a/t/t6020-merge-df.sh b/t/t6020-merge-df.sh index 490d397114..5d91d056d2 100755 --- a/t/t6020-merge-df.sh +++ b/t/t6020-merge-df.sh @@ -20,7 +20,9 @@ echo "file dir" > dir && git add dir && git commit -m "File: dir"' -test_expect_code 1 'Merge with d/f conflicts' 'git merge "merge msg" B master' +test_expect_success 'Merge with d/f conflicts' ' + test_expect_code 1 git merge "merge msg" B master +' test_expect_success 'F/D conflict' ' git reset --hard && diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh index b66544b76d..83efc7abf5 100755 --- a/t/t6022-merge-rename.sh +++ b/t/t6022-merge-rename.sh @@ -94,245 +94,147 @@ git checkout master' test_expect_success 'pull renaming branch into unrenaming one' \ ' - git show-branch - git pull . white && { - echo "BAD: should have conflicted" - return 1 - } - git ls-files -s - test "$(git ls-files -u B | wc -l)" -eq 3 || { - echo "BAD: should have left stages for B" - return 1 - } - test "$(git ls-files -s N | wc -l)" -eq 1 || { - echo "BAD: should have merged N" - return 1 - } + git show-branch && + test_expect_code 1 git pull . white && + git ls-files -s && + git ls-files -u B >b.stages && + test_line_count = 3 b.stages && + git ls-files -s N >n.stages && + test_line_count = 1 n.stages && sed -ne "/^g/{ p q - }" B | grep master || { - echo "BAD: should have listed our change first" - return 1 - } - test "$(git diff white N | wc -l)" -eq 0 || { - echo "BAD: should have taken colored branch" - return 1 - } + }" B | grep master && + git diff --exit-code white N ' test_expect_success 'pull renaming branch into another renaming one' \ ' - rm -f B - git reset --hard - git checkout red - git pull . white && { - echo "BAD: should have conflicted" - return 1 - } - test "$(git ls-files -u B | wc -l)" -eq 3 || { - echo "BAD: should have left stages" - return 1 - } - test "$(git ls-files -s N | wc -l)" -eq 1 || { - echo "BAD: should have merged N" - return 1 - } + rm -f B && + git reset --hard && + git checkout red && + test_expect_code 1 git pull . white && + git ls-files -u B >b.stages && + test_line_count = 3 b.stages && + git ls-files -s N >n.stages && + test_line_count = 1 n.stages && sed -ne "/^g/{ p q - }" B | grep red || { - echo "BAD: should have listed our change first" - return 1 - } - test "$(git diff white N | wc -l)" -eq 0 || { - echo "BAD: should have taken colored branch" - return 1 - } + }" B | grep red && + git diff --exit-code white N ' test_expect_success 'pull unrenaming branch into renaming one' \ ' - git reset --hard - git show-branch - git pull . master && { - echo "BAD: should have conflicted" - return 1 - } - test "$(git ls-files -u B | wc -l)" -eq 3 || { - echo "BAD: should have left stages" - return 1 - } - test "$(git ls-files -s N | wc -l)" -eq 1 || { - echo "BAD: should have merged N" - return 1 - } + git reset --hard && + git show-branch && + test_expect_code 1 git pull . master && + git ls-files -u B >b.stages && + test_line_count = 3 b.stages && + git ls-files -s N >n.stages && + test_line_count = 1 n.stages && sed -ne "/^g/{ p q - }" B | grep red || { - echo "BAD: should have listed our change first" - return 1 - } - test "$(git diff white N | wc -l)" -eq 0 || { - echo "BAD: should have taken colored branch" - return 1 - } + }" B | grep red && + git diff --exit-code white N ' test_expect_success 'pull conflicting renames' \ ' - git reset --hard - git show-branch - git pull . blue && { - echo "BAD: should have conflicted" - return 1 - } - test "$(git ls-files -u A | wc -l)" -eq 1 || { - echo "BAD: should have left a stage" - return 1 - } - test "$(git ls-files -u B | wc -l)" -eq 1 || { - echo "BAD: should have left a stage" - return 1 - } - test "$(git ls-files -u C | wc -l)" -eq 1 || { - echo "BAD: should have left a stage" - return 1 - } - test "$(git ls-files -s N | wc -l)" -eq 1 || { - echo "BAD: should have merged N" - return 1 - } + git reset --hard && + git show-branch && + test_expect_code 1 git pull . blue && + git ls-files -u A >a.stages && + test_line_count = 1 a.stages && + git ls-files -u B >b.stages && + test_line_count = 1 b.stages && + git ls-files -u C >c.stages && + test_line_count = 1 c.stages && + git ls-files -s N >n.stages && + test_line_count = 1 n.stages && sed -ne "/^g/{ p q - }" B | grep red || { - echo "BAD: should have listed our change first" - return 1 - } - test "$(git diff white N | wc -l)" -eq 0 || { - echo "BAD: should have taken colored branch" - return 1 - } + }" B | grep red && + git diff --exit-code white N ' test_expect_success 'interference with untracked working tree file' ' - - git reset --hard - git show-branch - echo >A this file should not matter - git pull . white && { - echo "BAD: should have conflicted" - return 1 - } - test -f A || { - echo "BAD: should have left A intact" - return 1 - } + git reset --hard && + git show-branch && + echo >A this file should not matter && + test_expect_code 1 git pull . white && + test_path_is_file A ' test_expect_success 'interference with untracked working tree file' ' - - git reset --hard - git checkout white - git show-branch - rm -f A - echo >A this file should not matter - git pull . red && { - echo "BAD: should have conflicted" - return 1 - } - test -f A || { - echo "BAD: should have left A intact" - return 1 - } + git reset --hard && + git checkout white && + git show-branch && + rm -f A && + echo >A this file should not matter && + test_expect_code 1 git pull . red && + test_path_is_file A ' test_expect_success 'interference with untracked working tree file' ' - - git reset --hard - rm -f A M - git checkout -f master - git tag -f anchor - git show-branch - git pull . yellow || { - echo "BAD: should have cleanly merged" - return 1 - } - test -f M && { - echo "BAD: should have removed M" - return 1 - } + git reset --hard && + rm -f A M && + git checkout -f master && + git tag -f anchor && + git show-branch && + git pull . yellow && + test_path_is_missing M && git reset --hard anchor ' test_expect_success 'updated working tree file should prevent the merge' ' - - git reset --hard - rm -f A M - git checkout -f master - git tag -f anchor - git show-branch - echo >>M one line addition - cat M >M.saved - git pull . yellow && { - echo "BAD: should have complained" - return 1 - } - test_cmp M M.saved || { - echo "BAD: should have left M intact" - return 1 - } + git reset --hard && + rm -f A M && + git checkout -f master && + git tag -f anchor && + git show-branch && + echo >>M one line addition && + cat M >M.saved && + test_expect_code 128 git pull . yellow && + test_cmp M M.saved && rm -f M.saved ' test_expect_success 'updated working tree file should prevent the merge' ' - - git reset --hard - rm -f A M - git checkout -f master - git tag -f anchor - git show-branch - echo >>M one line addition - cat M >M.saved - git update-index M - git pull . yellow && { - echo "BAD: should have complained" - return 1 - } - test_cmp M M.saved || { - echo "BAD: should have left M intact" - return 1 - } + git reset --hard && + rm -f A M && + git checkout -f master && + git tag -f anchor && + git show-branch && + echo >>M one line addition && + cat M >M.saved && + git update-index M && + test_expect_code 128 git pull . yellow && + test_cmp M M.saved && rm -f M.saved ' test_expect_success 'interference with untracked working tree file' ' - - git reset --hard - rm -f A M - git checkout -f yellow - git tag -f anchor - git show-branch - echo >M this file should not matter - git pull . master || { - echo "BAD: should have cleanly merged" - return 1 - } - test -f M || { - echo "BAD: should have left M intact" - return 1 - } - git ls-files -s | grep M && { - echo "BAD: M must be untracked in the result" - return 1 - } + git reset --hard && + rm -f A M && + git checkout -f yellow && + git tag -f anchor && + git show-branch && + echo >M this file should not matter && + git pull . master && + test_path_is_file M && + ! { + git ls-files -s | + grep M + } && git reset --hard anchor ' test_expect_success 'merge of identical changes in a renamed file' ' - rm -f A M N + rm -f A M N && git reset --hard && git checkout change+rename && GIT_MERGE_VERBOSITY=3 git merge change | grep "^Skipped B" && diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index d486d73994..d9f343942c 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -64,6 +64,14 @@ cp new1.txt test.txt test_expect_success "merge without conflict" \ "git merge-file test.txt orig.txt new2.txt" +test_expect_success 'works in subdirectory' ' + mkdir dir && + cp new1.txt dir/a.txt && + cp orig.txt dir/o.txt && + cp new2.txt dir/b.txt && + ( cd dir && git merge-file a.txt o.txt b.txt ) +' + cp new1.txt test.txt test_expect_success "merge without conflict (--quiet)" \ "git merge-file --quiet test.txt orig.txt new2.txt" diff --git a/t/t6024-recursive-merge.sh b/t/t6024-recursive-merge.sh index b3fbf659c0..755d30ce2a 100755 --- a/t/t6024-recursive-merge.sh +++ b/t/t6024-recursive-merge.sh @@ -104,7 +104,7 @@ test_expect_success 'mark rename/delete as unmerged' ' test_tick && git commit -m delete && git checkout -b rename HEAD^ && - git mv a1 a2 + git mv a1 a2 && test_tick && git commit -m rename && test_must_fail git merge delete && diff --git a/t/t6029-merge-subtree.sh b/t/t6029-merge-subtree.sh index 3900d9f61f..73fc240e85 100755 --- a/t/t6029-merge-subtree.sh +++ b/t/t6029-merge-subtree.sh @@ -6,7 +6,7 @@ test_description='subtree merge strategy' test_expect_success setup ' - s="1 2 3 4 5 6 7 8" + s="1 2 3 4 5 6 7 8" && for i in $s; do echo $i; done >hello && git add hello && git commit -m initial && diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index 3b042aacd6..b5063b6fe6 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -517,13 +517,13 @@ test_expect_success '"parallel" side branch creation' ' add_line_into_file "2(para): line 2 on parallel branch" dir2/file2 && PARA_HASH2=$(git rev-parse --verify HEAD) && add_line_into_file "3(para): line 3 on parallel branch" dir2/file3 && - PARA_HASH3=$(git rev-parse --verify HEAD) + PARA_HASH3=$(git rev-parse --verify HEAD) && git merge -m "merge HASH4 and PARA_HASH3" "$HASH4" && - PARA_HASH4=$(git rev-parse --verify HEAD) + PARA_HASH4=$(git rev-parse --verify HEAD) && add_line_into_file "5(para): add line on parallel branch" dir1/file1 && - PARA_HASH5=$(git rev-parse --verify HEAD) + PARA_HASH5=$(git rev-parse --verify HEAD) && add_line_into_file "6(para): add line on parallel branch" dir2/file2 && - PARA_HASH6=$(git rev-parse --verify HEAD) + PARA_HASH6=$(git rev-parse --verify HEAD) && git merge -m "merge HASH7 and PARA_HASH6" "$HASH7" && PARA_HASH7=$(git rev-parse --verify HEAD) ' diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index b874141658..004c365ad6 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -15,7 +15,7 @@ test_description='recursive merge corner cases' # test_expect_success setup ' - ten="0 1 2 3 4 5 6 7 8 9" + ten="0 1 2 3 4 5 6 7 8 9" && for i in $ten do echo line $i in a sample file diff --git a/t/t6038-merge-text-auto.sh b/t/t6038-merge-text-auto.sh index 52d0dc4bb8..460bf741b5 100755 --- a/t/t6038-merge-text-auto.sh +++ b/t/t6038-merge-text-auto.sh @@ -14,6 +14,8 @@ test_description='CRLF merge conflict across text=auto change . ./test-lib.sh +test_have_prereq MINGW && SED_OPTIONS=-b + test_expect_success setup ' git config core.autocrlf false && @@ -60,7 +62,7 @@ test_expect_success setup ' test_expect_success 'set up fuzz_conflict() helper' ' fuzz_conflict() { - sed -e "s/^\([<>=]......\) .*/\1/" "$@" + sed $SED_OPTIONS -e "s/^\([<>=]......\) .*/\1/" "$@" } ' diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index 1785e178a4..1e0447f615 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -60,7 +60,7 @@ test_expect_success 'checkout' ' test_expect_success 'checkout with local tracked branch' ' git checkout master && - git checkout follower >actual + git checkout follower >actual && grep "is ahead of" actual ' diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index 95b180f469..ae2194e07d 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -53,7 +53,7 @@ test_expect_success 'set up buggy branch' ' echo "line 12" >> hello && echo "line 13" >> hello && add_and_commit_file hello "2 more lines" && - HASH6=$(git rev-parse --verify HEAD) + HASH6=$(git rev-parse --verify HEAD) && echo "line 14" >> hello && echo "line 15" >> hello && echo "line 16" >> hello && diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 71f6cad3c2..9a16806921 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -129,6 +129,97 @@ test_expect_success '[merge] summary/log configuration' ' test_cmp expected actual2 ' +test_expect_success 'setup: clear [merge] configuration' ' + test_might_fail git config --unset-all merge.log && + test_might_fail git config --unset-all merge.summary +' + +test_expect_success 'setup FETCH_HEAD' ' + git checkout master && + test_tick && + git fetch . left +' + +test_expect_success 'merge.log=3 limits shortlog length' ' + cat >expected <<-EOF && + Merge branch ${apos}left${apos} + + * left: (5 commits) + Left #5 + Left #4 + Left #3 + ... + EOF + + git -c merge.log=3 fmt-merge-msg <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'merge.log=5 shows all 5 commits' ' + cat >expected <<-EOF && + Merge branch ${apos}left${apos} + + * left: + Left #5 + Left #4 + Left #3 + Common #2 + Common #1 + EOF + + git -c merge.log=5 fmt-merge-msg <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'merge.log=0 disables shortlog' ' + echo "Merge branch ${apos}left${apos}" >expected + git -c merge.log=0 fmt-merge-msg <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + +test_expect_success '--log=3 limits shortlog length' ' + cat >expected <<-EOF && + Merge branch ${apos}left${apos} + + * left: (5 commits) + Left #5 + Left #4 + Left #3 + ... + EOF + + git fmt-merge-msg --log=3 <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + +test_expect_success '--log=5 shows all 5 commits' ' + cat >expected <<-EOF && + Merge branch ${apos}left${apos} + + * left: + Left #5 + Left #4 + Left #3 + Common #2 + Common #1 + EOF + + git fmt-merge-msg --log=5 <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + +test_expect_success '--no-log disables shortlog' ' + echo "Merge branch ${apos}left${apos}" >expected && + git fmt-merge-msg --no-log <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + +test_expect_success '--log=0 disables shortlog' ' + echo "Merge branch ${apos}left${apos}" >expected && + git fmt-merge-msg --no-log <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + test_expect_success 'fmt-merge-msg -m' ' echo "Sync with left" >expected && cat >expected.log <<-EOF && diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index 65a35d94a0..a845b154e4 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -61,7 +61,7 @@ test_expect_success \ test_expect_success \ 'checking -f on untracked file with existing target' \ 'touch path0/untracked1 && - git mv -f untracked1 path0 + test_must_fail git mv -f untracked1 path0 && test ! -f .git/index.lock && test -f untracked1 && test -f path0/untracked1' @@ -207,7 +207,7 @@ test_expect_success 'git mv should not change sha1 of moved cache entry' ' git init && echo 1 >dirty && git add dirty && - entry="$(git ls-files --stage dirty | cut -f 1)" + entry="$(git ls-files --stage dirty | cut -f 1)" && git mv dirty dirty2 && [ "$entry" = "$(git ls-files --stage dirty2 | cut -f 1)" ] && echo 2 >dirty2 && diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index ac943f5eee..f160af3ccc 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1051,13 +1051,23 @@ test_expect_success \ test_expect_success \ 'message in editor has initial comment' ' - GIT_EDITOR=cat git tag -a initial-comment > actual + ! (GIT_EDITOR=cat git tag -a initial-comment > actual) +' + +test_expect_success \ + 'message in editor has initial comment: first line' ' # check the first line --- should be empty - first=$(sed -e 1q <actual) && - test -z "$first" && + echo >first.expect && + sed -e 1q <actual >first.actual && + test_cmp first.expect first.actual +' + +test_expect_success \ + 'message in editor has initial comment: remainder' ' # remove commented lines from the remainder -- should be empty - rest=$(sed -e 1d -e '/^#/d' <actual) && - test -z "$rest" + >rest.expect + sed -e 1d -e '/^#/d' <actual >rest.actual && + test_cmp rest.expect rest.actual ' get_tag_header reuse $commit commit $time >expect @@ -1097,7 +1107,7 @@ hash1=$(git rev-parse HEAD) test_expect_success 'creating second commit and tag' ' echo foo-2.0 >foo && git add foo && - git commit -m second + git commit -m second && git tag v2.0 ' @@ -1122,18 +1132,18 @@ v2.0 EOF test_expect_success 'checking that first commit is in all tags (hash)' " - git tag -l --contains $hash1 v* >actual + git tag -l --contains $hash1 v* >actual && test_cmp expected actual " # other ways of specifying the commit test_expect_success 'checking that first commit is in all tags (tag)' " - git tag -l --contains v1.0 v* >actual + git tag -l --contains v1.0 v* >actual && test_cmp expected actual " test_expect_success 'checking that first commit is in all tags (relative)' " - git tag -l --contains HEAD~2 v* >actual + git tag -l --contains HEAD~2 v* >actual && test_cmp expected actual " @@ -1142,7 +1152,7 @@ v2.0 EOF test_expect_success 'checking that second commit only has one tag' " - git tag -l --contains $hash2 v* >actual + git tag -l --contains $hash2 v* >actual && test_cmp expected actual " @@ -1151,7 +1161,7 @@ cat > expected <<EOF EOF test_expect_success 'checking that third commit has no tags' " - git tag -l --contains $hash3 v* >actual + git tag -l --contains $hash3 v* >actual && test_cmp expected actual " @@ -1161,7 +1171,7 @@ test_expect_success 'creating simple branch' ' git branch stable v2.0 && git checkout stable && echo foo-3.0 > foo && - git commit foo -m fourth + git commit foo -m fourth && git tag v3.0 ' @@ -1172,7 +1182,7 @@ v3.0 EOF test_expect_success 'checking that branch head only has one tag' " - git tag -l --contains $hash4 v* >actual + git tag -l --contains $hash4 v* >actual && test_cmp expected actual " @@ -1186,7 +1196,7 @@ v4.0 EOF test_expect_success 'checking that original branch head has one tag now' " - git tag -l --contains $hash3 v* >actual + git tag -l --contains $hash3 v* >actual && test_cmp expected actual " @@ -1201,18 +1211,18 @@ v4.0 EOF test_expect_success 'checking that initial commit is in all tags' " - git tag -l --contains $hash1 v* >actual + git tag -l --contains $hash1 v* >actual && test_cmp expected actual " # mixing modes and options: test_expect_success 'mixing incompatibles modes and options is forbidden' ' - test_must_fail git tag -a - test_must_fail git tag -l -v - test_must_fail git tag -n 100 - test_must_fail git tag -l -m msg - test_must_fail git tag -l -F some file + test_must_fail git tag -a && + test_must_fail git tag -l -v && + test_must_fail git tag -n 100 && + test_must_fail git tag -l -m msg && + test_must_fail git tag -l -F some file && test_must_fail git tag -v -s ' diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index fb744e3c4a..e9d8b9110d 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -4,44 +4,15 @@ test_description='Test automatic use of a pager.' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-pager.sh +. "$TEST_DIRECTORY"/lib-terminal.sh cleanup_fail() { echo >&2 cleanup failed (exit 1) } -test_expect_success 'set up terminal for tests' ' - rm -f stdout_is_tty || - cleanup_fail && - - if test -t 1 - then - >stdout_is_tty - elif - test_have_prereq PERL && - "$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl \ - sh -c "test -t 1" - then - >test_terminal_works - fi -' - -if test -e stdout_is_tty -then - test_terminal() { "$@"; } - test_set_prereq TTY -elif test -e test_terminal_works -then - test_terminal() { - "$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl "$@" - } - test_set_prereq TTY -else - say "# no usable terminal, so skipping some tests" -fi - test_expect_success 'setup' ' - unset GIT_PAGER GIT_PAGER_IN_USE; + sane_unset GIT_PAGER GIT_PAGER_IN_USE && test_might_fail git config --unset core.pager && PAGER="cat >paginated.out" && @@ -213,11 +184,6 @@ test_expect_success 'color when writing to a file intended for a pager' ' colorful colorful.log ' -if test_have_prereq SIMPLEPAGER && test_have_prereq TTY -then - test_set_prereq SIMPLEPAGERTTY -fi - # Use this helper to make it easy for the caller of your # terminal-using function to specify whether it should fail. # If you write @@ -253,8 +219,8 @@ parse_args() { test_default_pager() { parse_args "$@" - $test_expectation SIMPLEPAGERTTY "$cmd - default pager is used by default" " - unset PAGER GIT_PAGER; + $test_expectation SIMPLEPAGER,TTY "$cmd - default pager is used by default" " + sane_unset PAGER GIT_PAGER && test_might_fail git config --unset core.pager && rm -f default_pager_used || cleanup_fail && @@ -277,7 +243,7 @@ test_PAGER_overrides() { parse_args "$@" $test_expectation TTY "$cmd - PAGER overrides default pager" " - unset GIT_PAGER; + sane_unset GIT_PAGER && test_might_fail git config --unset core.pager && rm -f PAGER_used || cleanup_fail && @@ -305,7 +271,7 @@ test_core_pager() { parse_args "$@" $test_expectation TTY "$cmd - repository-local core.pager setting $used_if_wanted" " - unset GIT_PAGER; + sane_unset GIT_PAGER && rm -f core.pager_used || cleanup_fail && @@ -333,7 +299,7 @@ test_pager_subdir_helper() { parse_args "$@" $test_expectation TTY "$cmd - core.pager $used_if_wanted from subdirectory" " - unset GIT_PAGER; + sane_unset GIT_PAGER && rm -f core.pager_used && rm -fr sub || cleanup_fail && diff --git a/t/t7105-reset-patch.sh b/t/t7105-reset-patch.sh index 9891e2c1f5..95fab20361 100755 --- a/t/t7105-reset-patch.sh +++ b/t/t7105-reset-patch.sh @@ -18,7 +18,7 @@ test_expect_success PERL 'setup' ' # note: bar sorts before foo, so the first 'n' is always to skip 'bar' test_expect_success PERL 'saying "n" does nothing' ' - set_and_save_state dir/foo work work + set_and_save_state dir/foo work work && (echo n; echo n) | git reset -p && verify_saved_state dir/foo && verify_saved_state bar @@ -42,14 +42,14 @@ test_expect_success PERL 'git reset -p HEAD^' ' # the failure case (and thus get out of the loop). test_expect_success PERL 'git reset -p dir' ' - set_state dir/foo work work + set_state dir/foo work work && (echo y; echo n) | git reset -p dir && verify_state dir/foo work head && verify_saved_state bar ' test_expect_success PERL 'git reset -p -- foo (inside dir)' ' - set_state dir/foo work work + set_state dir/foo work work && (echo y; echo n) | (cd dir && git reset -p -- foo) && verify_state dir/foo work head && verify_saved_state bar diff --git a/t/t7300-clean.sh b/t/t7300-clean.sh index 6c776e9bec..c802ef8261 100755 --- a/t/t7300-clean.sh +++ b/t/t7300-clean.sh @@ -183,7 +183,7 @@ test_expect_success 'git clean symbolic link' ' mkdir -p build docs && touch a.out src/part3.c docs/manual.txt obj.o build/lib.so && - ln -s docs/manual.txt src/part4.c + ln -s docs/manual.txt src/part4.c && git clean && test -f Makefile && test -f README && diff --git a/t/t7401-submodule-summary.sh b/t/t7401-submodule-summary.sh index 294584452b..7d7fde057b 100755 --- a/t/t7401-submodule-summary.sh +++ b/t/t7401-submodule-summary.sh @@ -37,11 +37,12 @@ head1=$(add_file sm1 foo1 foo2) test_expect_success 'added submodule' " git add sm1 && git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 0000000...$head1 (2): > Add foo2 EOF + test_cmp expected actual " commit_file sm1 && @@ -49,20 +50,22 @@ head2=$(add_file sm1 foo3) test_expect_success 'modified submodule(forward)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head1...$head2 (1): > Add foo3 EOF + test_cmp expected actual " test_expect_success 'modified submodule(forward), --files' " git submodule summary --files >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head1...$head2 (1): > Add foo3 EOF + test_cmp expected actual " commit_file sm1 && @@ -74,19 +77,20 @@ head3=$( test_expect_success 'modified submodule(backward)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head2...$head3 (2): < Add foo3 < Add foo2 EOF + test_cmp expected actual " head4=$(add_file sm1 foo4 foo5) && head4_full=$(GIT_DIR=sm1/.git git rev-parse --verify HEAD) test_expect_success 'modified submodule(backward and forward)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head2...$head4 (4): > Add foo5 > Add foo4 @@ -94,17 +98,19 @@ test_expect_success 'modified submodule(backward and forward)' " < Add foo2 EOF + test_cmp expected actual " test_expect_success '--summary-limit' " git submodule summary -n 3 >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head2...$head4 (4): > Add foo5 > Add foo4 < Add foo3 EOF + test_cmp expected actual " commit_file sm1 && @@ -117,30 +123,33 @@ mv sm1-bak sm1 test_expect_success 'typechanged submodule(submodule->blob), --cached' " git submodule summary --cached >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head4(submodule)->$head5(blob) (3): < Add foo5 EOF + test_cmp actual expected " test_expect_success 'typechanged submodule(submodule->blob), --files' " git submodule summary --files >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head5(blob)->$head4(submodule) (3): > Add foo5 EOF + test_cmp actual expected " rm -rf sm1 && git checkout-index sm1 test_expect_success 'typechanged submodule(submodule->blob)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head4(submodule)->$head5(blob): EOF + test_cmp actual expected " rm -f sm1 && @@ -148,31 +157,34 @@ test_create_repo sm1 && head6=$(add_file sm1 foo6 foo7) test_expect_success 'nonexistent commit' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head4...$head6: Warn: sm1 doesn't contain commit $head4_full EOF + test_cmp actual expected " commit_file test_expect_success 'typechanged submodule(blob->submodule)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head5(blob)->$head6(submodule) (2): > Add foo7 EOF + test_cmp expected actual " commit_file sm1 && rm -rf sm1 test_expect_success 'deleted submodule' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head6...0000000: EOF + test_cmp expected actual " test_create_repo sm2 && @@ -181,34 +193,37 @@ git add sm2 test_expect_success 'multiple submodules' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head6...0000000: * sm2 0000000...$head7 (2): > Add foo9 EOF + test_cmp expected actual " test_expect_success 'path filter' " git submodule summary sm2 >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm2 0000000...$head7 (2): > Add foo9 EOF + test_cmp expected actual " commit_file sm2 test_expect_success 'given commit' " git submodule summary HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head6...0000000: * sm2 0000000...$head7 (2): > Add foo9 EOF + test_cmp expected actual " test_expect_success '--for-status' " diff --git a/t/t7403-submodule-sync.sh b/t/t7403-submodule-sync.sh index 02522f9627..e5b19538b0 100755 --- a/t/t7403-submodule-sync.sh +++ b/t/t7403-submodule-sync.sh @@ -23,7 +23,9 @@ test_expect_success setup ' git commit -m "submodule" ) && git clone super super-clone && - (cd super-clone && git submodule update --init) + (cd super-clone && git submodule update --init) && + git clone super empty-clone && + (cd empty-clone && git submodule init) ' test_expect_success 'change submodule' ' @@ -64,4 +66,12 @@ test_expect_success '"git submodule sync" should update submodule URLs' ' ) ' +test_expect_success '"git submodule sync" should update submodule URLs if not yet cloned' ' + (cd empty-clone && + git pull && + git submodule sync && + test -d "$(git config submodule.submodule.url)" + ) +' + test_done diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh index 905a8baae9..d8ad25036f 100755 --- a/t/t7407-submodule-foreach.sh +++ b/t/t7407-submodule-foreach.sh @@ -226,6 +226,21 @@ test_expect_success 'test "status --recursive"' ' test_cmp expect actual ' +sed -e "/nested1 /s/.*/+$nested1sha1 nested1 (file2~1)/;/sub[1-3]/d" < expect > expect2 +mv -f expect2 expect + +test_expect_success 'ensure "status --cached --recursive" preserves the --cached flag' ' + ( + cd clone3 && + ( + cd nested1 && + test_commit file2 + ) && + git submodule status --cached --recursive -- nested1 > ../actual + ) && + test_cmp expect actual +' + test_expect_success 'use "git clone --recursive" to checkout all submodules' ' git clone --recursive super clone4 && test -d clone4/.git && @@ -238,4 +253,39 @@ test_expect_success 'use "git clone --recursive" to checkout all submodules' ' test -d clone4/nested1/nested2/nested3/submodule/.git ' +test_expect_success 'test "update --recursive" with a flag with spaces' ' + git clone super "common objects" && + git clone super clone5 && + ( + cd clone5 && + test ! -d nested1/.git && + git submodule update --init --recursive --reference="$(dirname "$PWD")/common objects" && + test -d nested1/.git && + test -d nested1/nested2/.git && + test -d nested1/nested2/nested3/.git && + test -f nested1/.git/objects/info/alternates && + test -f nested1/nested2/.git/objects/info/alternates && + test -f nested1/nested2/nested3/.git/objects/info/alternates + ) +' + +test_expect_success 'use "update --recursive nested1" to checkout all submodules rooted in nested1' ' + git clone super clone6 && + ( + cd clone6 && + test ! -d sub1/.git && + test ! -d sub2/.git && + test ! -d sub3/.git && + test ! -d nested1/.git && + git submodule update --init --recursive -- nested1 && + test ! -d sub1/.git && + test ! -d sub2/.git && + test ! -d sub3/.git && + test -d nested1/.git && + test -d nested1/nested2/.git && + test -d nested1/nested2/nested3/.git && + test -d nested1/nested2/nested3/submodule/.git + ) +' + test_done diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index ac2e187a57..50da034cd3 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -252,8 +252,8 @@ test_expect_success 'committer is automatic' ' echo >>negative && ( - unset GIT_COMMITTER_EMAIL - unset GIT_COMMITTER_NAME + sane_unset GIT_COMMITTER_EMAIL && + sane_unset GIT_COMMITTER_NAME && # must fail because there is no change test_must_fail git commit -e -m "sample" ) && @@ -390,7 +390,7 @@ try_commit_status_combo () { test_expect_success 'commit --no-status' ' clear_config commit.status && - try_commit --no-status + try_commit --no-status && ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' diff --git a/t/t7508-status.sh b/t/t7508-status.sh index c9300f3c8b..4de3e27950 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -44,7 +44,7 @@ cat >expect <<\EOF # # new file: dir2/added # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -73,7 +73,7 @@ cat >expect <<\EOF # Changes to be committed: # new file: dir2/added # -# Changed but not updated: +# Changes not staged for commit: # modified: dir1/modified # # Untracked files: @@ -140,7 +140,7 @@ cat >expect <<EOF # # new file: dir2/added # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -167,7 +167,7 @@ cat >expect <<EOF # Changes to be committed: # new file: dir2/added # -# Changed but not updated: +# Changes not staged for commit: # modified: dir1/modified # # Untracked files not listed @@ -202,7 +202,7 @@ cat >expect <<EOF # # new file: dir2/added # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -260,7 +260,7 @@ cat >expect <<EOF # # new file: dir2/added # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -320,7 +320,7 @@ cat >expect <<\EOF # # new file: ../dir2/added # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -392,7 +392,7 @@ cat >expect <<\EOF # # <GREEN>new file: dir2/added<RESET> # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -521,7 +521,7 @@ cat >expect <<\EOF # # new file: dir2/added # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -614,7 +614,7 @@ cat >expect <<EOF # new file: dir2/added # new file: sm # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -673,7 +673,7 @@ cat >expect <<EOF # new file: dir2/added # new file: sm # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -718,7 +718,7 @@ test_expect_success 'status -s submodule summary' ' cat >expect <<EOF # On branch master -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -766,7 +766,7 @@ cat >expect <<EOF # new file: dir2/added # new file: sm # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -819,7 +819,7 @@ cat > expect << EOF # # modified: sm # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -931,7 +931,7 @@ cat > expect << EOF # # modified: sm # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # (commit or discard the untracked or modified content in submodules) @@ -989,7 +989,7 @@ cat > expect << EOF # # modified: sm # -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # @@ -1067,7 +1067,7 @@ test_expect_success ".git/config ignore=dirty doesn't suppress submodule summary cat > expect << EOF # On branch master -# Changed but not updated: +# Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # diff --git a/t/t7509-commit.sh b/t/t7509-commit.sh index 643ab03f99..77b6920029 100755 --- a/t/t7509-commit.sh +++ b/t/t7509-commit.sh @@ -40,7 +40,7 @@ test_expect_success '-C option copies only the message with --reset-author' ' test_tick && git commit -a -C Initial --reset-author && echo "author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> $GIT_AUTHOR_DATE" >expect && - author_header HEAD >actual + author_header HEAD >actual && test_cmp expect actual && message_body Initial >expect && diff --git a/t/t7601-merge-pull-config.sh b/t/t7601-merge-pull-config.sh index 7ba94ea99b..b44b293950 100755 --- a/t/t7601-merge-pull-config.sh +++ b/t/t7601-merge-pull-config.sh @@ -114,13 +114,13 @@ test_expect_success 'setup conflicted merge' ' test_expect_success 'merge picks up the best result' ' git config --unset-all pull.twohead && git reset --hard c5 && - git merge -s resolve c6 + test_must_fail git merge -s resolve c6 && resolve_count=$(conflict_count) && git reset --hard c5 && - git merge -s recursive c6 + test_must_fail git merge -s recursive c6 && recursive_count=$(conflict_count) && git reset --hard c5 && - git merge -s recursive -s resolve c6 + test_must_fail git merge -s recursive -s resolve c6 && auto_count=$(conflict_count) && test $auto_count = $recursive_count && test $auto_count != $resolve_count @@ -129,13 +129,13 @@ test_expect_success 'merge picks up the best result' ' test_expect_success 'merge picks up the best result (from config)' ' git config pull.twohead "recursive resolve" && git reset --hard c5 && - git merge -s resolve c6 + test_must_fail git merge -s resolve c6 && resolve_count=$(conflict_count) && git reset --hard c5 && - git merge -s recursive c6 + test_must_fail git merge -s recursive c6 && recursive_count=$(conflict_count) && git reset --hard c5 && - git merge c6 + test_must_fail git merge c6 && auto_count=$(conflict_count) && test $auto_count = $recursive_count && test $auto_count != $resolve_count diff --git a/t/t7602-merge-octopus-many.sh b/t/t7602-merge-octopus-many.sh index 2746169514..0a46795ae7 100755 --- a/t/t7602-merge-octopus-many.sh +++ b/t/t7602-merge-octopus-many.sh @@ -31,7 +31,7 @@ test_expect_success 'merge c1 with c2, c3, c4, ... c29' ' do refs="$refs c$i" i=`expr $i + 1` - done + done && git merge $refs && test "$(git rev-parse c1)" != "$(git rev-parse HEAD)" && i=1 && diff --git a/t/t7608-merge-messages.sh b/t/t7608-merge-messages.sh index 28d56797b1..9225fa6f02 100755 --- a/t/t7608-merge-messages.sh +++ b/t/t7608-merge-messages.sh @@ -47,14 +47,14 @@ test_expect_success 'ambiguous tag' ' check_oneline "Merge commit QambiguousQ" ' -test_expect_success 'remote branch' ' +test_expect_success 'remote-tracking branch' ' git checkout -b remote master && test_commit remote-1 && git update-ref refs/remotes/origin/master remote && git checkout master && test_commit master-5 && git merge origin/master && - check_oneline "Merge remote branch Qorigin/masterQ" + check_oneline "Merge remote-tracking branch Qorigin/masterQ" ' test_done diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh index 3bd74042ef..d78bdec330 100755 --- a/t/t7610-mergetool.sh +++ b/t/t7610-mergetool.sh @@ -54,7 +54,7 @@ test_expect_success 'custom mergetool' ' test_expect_success 'mergetool crlf' ' git config core.autocrlf true && - git checkout -b test2 branch1 + git checkout -b test2 branch1 && test_must_fail git merge master >/dev/null 2>&1 && ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index c2f66ff170..d954b846a1 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -56,7 +56,7 @@ test_expect_success 'loose objects in alternate ODB are not repacked' ' ' test_expect_success 'packed obs in alt ODB are repacked even when local repo is packless' ' - mkdir alt_objects/pack + mkdir alt_objects/pack && mv .git/objects/pack/* alt_objects/pack && git repack -a && myidx=$(ls -1 .git/objects/pack/*.idx) && @@ -95,14 +95,14 @@ test_expect_success 'packed obs in alternate ODB kept pack are repacked' ' # swap the .keep so the commit object is in the pack with .keep for p in alt_objects/pack/*.pack do - base_name=$(basename $p .pack) + base_name=$(basename $p .pack) && if test -f alt_objects/pack/$base_name.keep then rm alt_objects/pack/$base_name.keep else touch alt_objects/pack/$base_name.keep fi - done + done && git repack -a -d && myidx=$(ls -1 .git/objects/pack/*.idx) && test -f "$myidx" && diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 58dc6f6452..4048d106d4 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -98,7 +98,7 @@ test_expect_success PERL 'difftool --gui works without configured diff.guitool' # Specify the diff tool using $GIT_DIFF_TOOL test_expect_success PERL 'GIT_DIFF_TOOL variable' ' - git config --unset diff.tool + test_might_fail git config --unset diff.tool && GIT_DIFF_TOOL=test-tool && export GIT_DIFF_TOOL && @@ -166,7 +166,7 @@ test_expect_success PERL 'difftool.prompt config variable is false' ' # Test that we don't have to pass --no-prompt when mergetool.prompt is false test_expect_success PERL 'difftool merge.prompt = false' ' - git config --unset difftool.prompt + test_might_fail git config --unset difftool.prompt && git config mergetool.prompt false && diff=$(git difftool branch) && @@ -211,7 +211,7 @@ test_expect_success PERL 'difftool last flag wins' ' # git-difftool falls back to git-mergetool config variables # so test that behavior here test_expect_success PERL 'difftool + mergetool config variables' ' - remove_config_vars + remove_config_vars && git config merge.tool test-tool && git config mergetool.test-tool.cmd "cat \$LOCAL" && @@ -254,17 +254,17 @@ test_expect_success PERL 'difftool -x cat' ' ' test_expect_success PERL 'difftool --extcmd echo arg1' ' - diff=$(git difftool --no-prompt --extcmd sh\ -c\ \"echo\ \$1\" branch) + diff=$(git difftool --no-prompt --extcmd sh\ -c\ \"echo\ \$1\" branch) && test "$diff" = file ' test_expect_success PERL 'difftool --extcmd cat arg1' ' - diff=$(git difftool --no-prompt --extcmd sh\ -c\ \"cat\ \$1\" branch) + diff=$(git difftool --no-prompt --extcmd sh\ -c\ \"cat\ \$1\" branch) && test "$diff" = master ' test_expect_success PERL 'difftool --extcmd cat arg2' ' - diff=$(git difftool --no-prompt --extcmd sh\ -c\ \"cat\ \$2\" branch) + diff=$(git difftool --no-prompt --extcmd sh\ -c\ \"cat\ \$2\" branch) && test "$diff" = branch ' diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 023f225a4b..c8777589ca 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -324,8 +324,13 @@ test_expect_success 'log grep setup' ' echo a >>file && test_tick && - git commit -a -m "third" + git commit -a -m "third" && + echo a >>file && + test_tick && + GIT_AUTHOR_NAME="Night Fall" \ + GIT_AUTHOR_EMAIL="nitfol@frobozz.com" \ + git commit -a -m "fourth" ' test_expect_success 'log grep (1)' ' @@ -372,6 +377,28 @@ test_expect_success 'log --grep --author implicitly uses all-match' ' test_cmp expect actual ' +test_expect_success 'log with multiple --author uses union' ' + git log --author="Thor" --author="Aster" --format=%s >actual && + { + echo third && echo second && echo initial + } >expect && + test_cmp expect actual +' + +test_expect_success 'log with --grep and multiple --author uses all-match' ' + git log --author="Thor" --author="Night" --grep=i --format=%s >actual && + { + echo third && echo initial + } >expect && + test_cmp expect actual +' + +test_expect_success 'log with --grep and multiple --author uses all-match' ' + git log --author="Thor" --author="Night" --grep=q --format=%s >actual && + >expect && + test_cmp expect actual +' + test_expect_success 'grep with CE_VALID file' ' git update-index --assume-unchanged t/t && rm t/t && @@ -452,7 +479,7 @@ test_expect_success 'outside of git repository' ' echo file1:hello && echo sub/file2:world } >non/expect.full && - echo file2:world >non/expect.sub + echo file2:world >non/expect.sub && ( GIT_CEILING_DIRECTORIES="$(pwd)/non/git" && export GIT_CEILING_DIRECTORIES && @@ -478,7 +505,7 @@ test_expect_success 'inside git repository but with --no-index' ' echo sub/file2:world } >is/expect.full && : >is/expect.empty && - echo file2:world >is/expect.sub + echo file2:world >is/expect.sub && ( cd is/git && git init && diff --git a/t/t8006-blame-textconv.sh b/t/t8006-blame-textconv.sh index 9ad96d4d32..dbf623bce5 100755 --- a/t/t8006-blame-textconv.sh +++ b/t/t8006-blame-textconv.sh @@ -9,22 +9,29 @@ find_blame() { cat >helper <<'EOF' #!/bin/sh -sed 's/^/converted: /' "$@" +grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; } +sed 's/^bin: /converted: /' "$1" EOF chmod +x helper test_expect_success 'setup ' ' - echo test 1 >one.bin && - echo test number 2 >two.bin && + echo "bin: test 1" >one.bin && + echo "bin: test number 2" >two.bin && + if test_have_prereq SYMLINKS; then + ln -s one.bin symlink.bin + fi && git add . && GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" && - echo test 1 version 2 >one.bin && - echo test number 2 version 2 >>two.bin && + echo "bin: test 1 version 2" >one.bin && + echo "bin: test number 2 version 2" >>two.bin && + if test_have_prereq SYMLINKS; then + ln -sf two.bin symlink.bin + fi && GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00" ' cat >expected <<EOF -(Number2 2010-01-01 20:00:00 +0000 1) test 1 version 2 +(Number2 2010-01-01 20:00:00 +0000 1) bin: test 1 version 2 EOF test_expect_success 'no filter specified' ' @@ -67,7 +74,7 @@ test_expect_success 'blame --textconv going through revisions' ' ' test_expect_success 'make a new commit' ' - echo "test number 2 version 3" >>two.bin && + echo "bin: test number 2 version 3" >>two.bin && GIT_AUTHOR_NAME=Number3 git commit -a -m Third --date="2010-01-01 22:00:00" ' @@ -77,4 +84,45 @@ test_expect_success 'blame from previous revision' ' test_cmp expected result ' +cat >expected <<EOF +(Number2 2010-01-01 20:00:00 +0000 1) two.bin +EOF + +test_expect_success SYMLINKS 'blame with --no-textconv (on symlink)' ' + git blame --no-textconv symlink.bin >blame && + find_blame <blame >result && + test_cmp expected result +' + +test_expect_success SYMLINKS 'blame --textconv (on symlink)' ' + git blame --textconv symlink.bin >blame && + find_blame <blame >result && + test_cmp expected result +' + +# cp two.bin three.bin and make small tweak +# (this will direct blame -C -C three.bin to consider two.bin and symlink.bin) +test_expect_success SYMLINKS 'make another new commit' ' + cat >three.bin <<\EOF && +bin: test number 2 +bin: test number 2 version 2 +bin: test number 2 version 3 +bin: test number 3 +EOF + git add three.bin && + GIT_AUTHOR_NAME=Number4 git commit -a -m Fourth --date="2010-01-01 23:00:00" +' + +test_expect_success SYMLINKS 'blame on last commit (-C -C, symlink)' ' + git blame -C -C three.bin >blame && + find_blame <blame >result && + cat >expected <<\EOF && +(Number1 2010-01-01 18:00:00 +0000 1) converted: test number 2 +(Number2 2010-01-01 20:00:00 +0000 2) converted: test number 2 version 2 +(Number3 2010-01-01 22:00:00 +0000 3) converted: test number 2 version 3 +(Number4 2010-01-01 23:00:00 +0000 4) converted: test number 3 +EOF + test_cmp expected result +' + test_done diff --git a/t/t8007-cat-file-textconv.sh b/t/t8007-cat-file-textconv.sh index 38ac05e4a0..78a0085e64 100755 --- a/t/t8007-cat-file-textconv.sh +++ b/t/t8007-cat-file-textconv.sh @@ -5,15 +5,19 @@ test_description='git cat-file textconv support' cat >helper <<'EOF' #!/bin/sh -sed 's/^/converted: /' "$@" +grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; } +sed 's/^bin: /converted: /' "$1" EOF chmod +x helper test_expect_success 'setup ' ' - echo test >one.bin && + echo "bin: test" >one.bin && + if test_have_prereq SYMLINKS; then + ln -s one.bin symlink.bin + fi && git add . && GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" && - echo test version 2 >one.bin && + echo "bin: test version 2" >one.bin && GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00" ' @@ -33,7 +37,7 @@ test_expect_success 'setup textconv filters' ' ' cat >expected <<EOF -test version 2 +bin: test version 2 EOF test_expect_success 'cat-file without --textconv' ' @@ -42,7 +46,7 @@ test_expect_success 'cat-file without --textconv' ' ' cat >expected <<EOF -test +bin: test EOF test_expect_success 'cat-file without --textconv on previous commit' ' @@ -67,4 +71,28 @@ test_expect_success 'cat-file --textconv on previous commit' ' git cat-file --textconv HEAD^:one.bin >result && test_cmp expected result ' + +test_expect_success SYMLINKS 'cat-file without --textconv (symlink)' ' + git cat-file blob :symlink.bin >result && + printf "%s" "one.bin" >expected + test_cmp expected result +' + + +test_expect_success SYMLINKS 'cat-file --textconv on index (symlink)' ' + ! git cat-file --textconv :symlink.bin 2>result && + cat >expected <<\EOF && +fatal: git cat-file --textconv: unable to run textconv on :symlink.bin +EOF + test_cmp expected result +' + +test_expect_success SYMLINKS 'cat-file --textconv on HEAD (symlink)' ' + ! git cat-file --textconv HEAD:symlink.bin 2>result && + cat >expected <<EOF && +fatal: git cat-file --textconv: unable to run textconv on HEAD:symlink.bin +EOF + test_cmp expected result +' + test_done diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 07c50c764c..d1ba25205b 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -201,10 +201,28 @@ test_expect_success $PREREQ 'Prompting works' ' grep "^To: to@example.com\$" msgtxt1 ' +test_expect_success $PREREQ 'tocmd works' ' + clean_fake_sendmail && + cp $patches tocmd.patch && + echo tocmd--tocmd@example.com >>tocmd.patch && + { + echo "#!$SHELL_PATH" + echo sed -n -e s/^tocmd--//p \"\$1\" + } > tocmd-sed && + chmod +x tocmd-sed && + git send-email \ + --from="Example <nobody@example.com>" \ + --to-cmd=./tocmd-sed \ + --smtp-server="$(pwd)/fake.sendmail" \ + tocmd.patch \ + && + grep "^To: tocmd@example.com" msgtxt1 +' + test_expect_success $PREREQ 'cccmd works' ' clean_fake_sendmail && cp $patches cccmd.patch && - echo cccmd--cccmd@example.com >>cccmd.patch && + echo "cccmd-- cccmd@example.com" >>cccmd.patch && { echo "#!$SHELL_PATH" echo sed -n -e s/^cccmd--//p \"\$1\" @@ -947,6 +965,45 @@ test_expect_success $PREREQ '--no-bcc overrides sendemail.bcc' ' ! grep "RCPT TO:<other@ex.com>" stdout ' +test_expect_success $PREREQ 'patches To headers are used by default' ' + patch=`git format-patch -1 --to="bodies@example.com"` && + test_when_finished "rm $patch" && + git send-email \ + --dry-run \ + --from="Example <nobody@example.com>" \ + --smtp-server relay.example.com \ + $patch >stdout && + grep "RCPT TO:<bodies@example.com>" stdout +' + +test_expect_success $PREREQ 'patches To headers are appended to' ' + patch=`git format-patch -1 --to="bodies@example.com"` && + test_when_finished "rm $patch" && + git send-email \ + --dry-run \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server relay.example.com \ + $patch >stdout && + grep "RCPT TO:<bodies@example.com>" stdout && + grep "RCPT TO:<nobody@example.com>" stdout +' + +test_expect_success $PREREQ 'To headers from files reset each patch' ' + patch1=`git format-patch -1 --to="bodies@example.com"` && + patch2=`git format-patch -1 --to="other@example.com" HEAD~` && + test_when_finished "rm $patch1 && rm $patch2" && + git send-email \ + --dry-run \ + --from="Example <nobody@example.com>" \ + --to="nobody@example.com" \ + --smtp-server relay.example.com \ + $patch1 $patch2 >stdout && + test $(grep -c "RCPT TO:<bodies@example.com>" stdout) = 1 && + test $(grep -c "RCPT TO:<nobody@example.com>" stdout) = 2 && + test $(grep -c "RCPT TO:<other@example.com>" stdout) = 1 +' + test_expect_success $PREREQ 'setup expect' ' cat >email-using-8bit <<EOF From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 @@ -1032,4 +1089,40 @@ test_expect_success $PREREQ '--8bit-encoding also treats subject' ' test_cmp expected actual ' +# Note that the patches in this test are deliberately out of order; we +# want to make sure it works even if the cover-letter is not in the +# first mail. +test_expect_success 'refusing to send cover letter template' ' + clean_fake_sendmail && + rm -fr outdir && + git format-patch --cover-letter -2 -o outdir && + test_must_fail git send-email \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0002-*.patch \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + 2>errors >out && + grep "SUBJECT HERE" errors && + test -z "$(ls msgtxt*)" +' + +test_expect_success '--force sends cover letter template anyway' ' + clean_fake_sendmail && + rm -fr outdir && + git format-patch --cover-letter -2 -o outdir && + git send-email \ + --force \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0002-*.patch \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + 2>errors >out && + ! grep "SUBJECT HERE" errors && + test -n "$(ls msgtxt*)" +' + test_done diff --git a/t/t9104-git-svn-follow-parent.sh b/t/t9104-git-svn-follow-parent.sh index f7f3c5ab8e..13b179e721 100755 --- a/t/t9104-git-svn-follow-parent.sh +++ b/t/t9104-git-svn-follow-parent.sh @@ -190,7 +190,7 @@ test_expect_success "follow-parent is atomic" ' git svn init --minimize-url -i stunk "$svnrepo"/stunk && git svn fetch -i stunk && git svn init --minimize-url -i flunked "$svnrepo"/flunked && - git svn fetch -i flunked + git svn fetch -i flunked && test "`git rev-parse --verify refs/remotes/flunk@18`" \ = "`git rev-parse --verify refs/remotes/stunk`" && test "`git rev-parse --verify refs/remotes/flunk~1`" \ diff --git a/t/t9123-git-svn-rebuild-with-rewriteroot.sh b/t/t9123-git-svn-rebuild-with-rewriteroot.sh index 0ed90d982d..fd8184787f 100755 --- a/t/t9123-git-svn-rebuild-with-rewriteroot.sh +++ b/t/t9123-git-svn-rebuild-with-rewriteroot.sh @@ -16,7 +16,7 @@ rm -rf import test_expect_success 'init, fetch and checkout repository' ' git svn init --rewrite-root=http://invalid.invalid/ "$svnrepo" && - git svn fetch + git svn fetch && git checkout -b mybranch ${remotes_git_svn} ' diff --git a/t/t9124-git-svn-dcommit-auto-props.sh b/t/t9124-git-svn-dcommit-auto-props.sh index d6b076f6b7..aa841e1299 100755 --- a/t/t9124-git-svn-dcommit-auto-props.sh +++ b/t/t9124-git-svn-dcommit-auto-props.sh @@ -24,7 +24,7 @@ test_expect_success 'initialize git svn' ' svn_cmd import -m "import for git svn" . "$svnrepo" ) && rm -rf import && - git svn init "$svnrepo" + git svn init "$svnrepo" && git svn fetch ' diff --git a/t/t9146-git-svn-empty-dirs.sh b/t/t9146-git-svn-empty-dirs.sh index 565365cbd3..158c8e33ef 100755 --- a/t/t9146-git-svn-empty-dirs.sh +++ b/t/t9146-git-svn-empty-dirs.sh @@ -33,7 +33,7 @@ test_expect_success 'more emptiness' ' ' test_expect_success 'git svn rebase creates empty directory' ' - ( cd cloned && git svn rebase ) + ( cd cloned && git svn rebase ) && test -d cloned/"! !" ' diff --git a/t/t9151-svn-mergeinfo.sh b/t/t9151-svn-mergeinfo.sh index 250c651eae..4f6c06ecb2 100755 --- a/t/t9151-svn-mergeinfo.sh +++ b/t/t9151-svn-mergeinfo.sh @@ -18,39 +18,39 @@ test_expect_success 'load svn dump' " test_expect_success 'all svn merges became git merge commits' ' unmarked=$(git rev-list --parents --all --grep=Merge | - grep -v " .* " | cut -f1 -d" ") + grep -v " .* " | cut -f1 -d" ") && [ -z "$unmarked" ] ' test_expect_success 'cherry picks did not become git merge commits' ' bad_cherries=$(git rev-list --parents --all --grep=Cherry | - grep " .* " | cut -f1 -d" ") + grep " .* " | cut -f1 -d" ") && [ -z "$bad_cherries" ] ' test_expect_success 'svn non-merge merge commits did not become git merge commits' ' bad_non_merges=$(git rev-list --parents --all --grep=non-merge | - grep " .* " | cut -f1 -d" ") + grep " .* " | cut -f1 -d" ") && [ -z "$bad_non_merges" ] ' test_expect_success 'commit made to merged branch is reachable from the merge' ' - before_commit=$(git rev-list --all --grep="trunk commit before merging trunk to b2") - merge_commit=$(git rev-list --all --grep="Merge trunk to b2") - not_reachable=$(git rev-list -1 $before_commit --not $merge_commit) + before_commit=$(git rev-list --all --grep="trunk commit before merging trunk to b2") && + merge_commit=$(git rev-list --all --grep="Merge trunk to b2") && + not_reachable=$(git rev-list -1 $before_commit --not $merge_commit) && [ -z "$not_reachable" ] ' test_expect_success 'merging two branches in one commit is detected correctly' ' - f1_commit=$(git rev-list --all --grep="make f1 branch from trunk") - f2_commit=$(git rev-list --all --grep="make f2 branch from trunk") - merge_commit=$(git rev-list --all --grep="Merge f1 and f2 to trunk") - not_reachable=$(git rev-list -1 $f1_commit $f2_commit --not $merge_commit) + f1_commit=$(git rev-list --all --grep="make f1 branch from trunk") && + f2_commit=$(git rev-list --all --grep="make f2 branch from trunk") && + merge_commit=$(git rev-list --all --grep="Merge f1 and f2 to trunk") && + not_reachable=$(git rev-list -1 $f1_commit $f2_commit --not $merge_commit) && [ -z "$not_reachable" ] ' test_expect_failure 'everything got merged in the end' ' - unmerged=$(git rev-list --all --not master) + unmerged=$(git rev-list --all --not master) && [ -z "$unmerged" ] ' diff --git a/t/t9157-git-svn-fetch-merge.sh b/t/t9157-git-svn-fetch-merge.sh index da582c5382..da582c5382 100644..100755 --- a/t/t9157-git-svn-fetch-merge.sh +++ b/t/t9157-git-svn-fetch-merge.sh diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 7c059204e9..14d17691b1 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -321,7 +321,7 @@ test_expect_success \ 'for p in .git/objects/pack/*.pack;do git verify-pack $p||exit;done' test_expect_success \ 'C: validate reuse existing blob' \ - 'test $newf = `git rev-parse --verify branch:file2/newf` + 'test $newf = `git rev-parse --verify branch:file2/newf` && test $oldf = `git rev-parse --verify branch:file2/oldf`' cat >expect <<EOF @@ -875,6 +875,27 @@ test_expect_success \ compare_diff_raw expect actual' test_expect_success \ + 'N: copy root directory by tree hash' \ + 'cat >expect <<-\EOF && + :100755 000000 f1fb5da718392694d0076d677d6d0e364c79b0bc 0000000000000000000000000000000000000000 D file3/newf + :100644 000000 7123f7f44e39be127c5eb701e5968176ee9d78b1 0000000000000000000000000000000000000000 D file3/oldf + EOF + root=$(git rev-parse refs/heads/branch^0^{tree}) && + cat >input <<-INPUT_END && + commit refs/heads/N6 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + copy root directory by tree hash + COMMIT + + from refs/heads/branch^0 + M 040000 $root "" + INPUT_END + git fast-import <input && + git diff-tree -C --find-copies-harder -r N4 N6 >actual && + compare_diff_raw expect actual' + +test_expect_success \ 'N: modify copied tree' \ 'cat >expect <<-\EOF && :100644 100644 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 C100 newdir/interesting file3/file5 diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 8c8e679468..f823c05305 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -26,7 +26,7 @@ test_expect_success 'setup' ' test_tick && git tag rein && git checkout -b wer HEAD^ && - echo lange > file2 + echo lange > file2 && test_tick && git commit -m sitzt file2 && test_tick && diff --git a/t/t9400-git-cvsserver-server.sh b/t/t9400-git-cvsserver-server.sh index 36c457e7f2..9199550ef4 100755 --- a/t/t9400-git-cvsserver-server.sh +++ b/t/t9400-git-cvsserver-server.sh @@ -57,7 +57,7 @@ test_expect_success 'setup' ' # as argument to co -d test_expect_success 'basic checkout' \ 'GIT_CONFIG="$git_config" cvs -Q co -d cvswork master && - test "$(echo $(grep -v ^D cvswork/CVS/Entries|cut -d/ -f2,3,5 | head -n 1))" = "empty/1.1/" + test "$(echo $(grep -v ^D cvswork/CVS/Entries|cut -d/ -f2,3,5 | head -n 1))" = "empty/1.1/" && test "$(echo $(grep -v ^D cvswork/CVS/Entries|cut -d/ -f2,3,5 | sed -ne \$p))" = "secondrootfile/1.1/"' #------------------------ diff --git a/t/t9401-git-cvsserver-crlf.sh b/t/t9401-git-cvsserver-crlf.sh index 1bbfd824e5..ff6d6fb473 100755 --- a/t/t9401-git-cvsserver-crlf.sh +++ b/t/t9401-git-cvsserver-crlf.sh @@ -70,7 +70,7 @@ test_expect_success 'setup' ' mkdir subdir && echo "Another text file" > subdir/file.h && echo "Another binary: Q (this time CR)" | q_to_cr > subdir/withCr.bin && - echo "Mixed up NUL, but marked text: Q <- there" | q_to_nul > mixedUp.c + echo "Mixed up NUL, but marked text: Q <- there" | q_to_nul > mixedUp.c && echo "Unspecified" > subdir/unspecified.other && echo "/*.bin -crlf" > .gitattributes && echo "/*.c crlf" >> .gitattributes && diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index 4f2b9b062b..21cd286bb7 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -650,25 +650,26 @@ test_debug 'cat gitweb.log' # ---------------------------------------------------------------------- # syntax highlighting -cat >>gitweb_config.perl <<\EOF -$feature{'highlight'}{'override'} = 1; -EOF highlight --version >/dev/null 2>&1 if [ $? -eq 127 ]; then say "Skipping syntax highlighting test, because 'highlight' was not found" else test_set_prereq HIGHLIGHT + cat >>gitweb_config.perl <<-\EOF + our $highlight_bin = "highlight"; + $feature{'highlight'}{'override'} = 1; + EOF fi test_expect_success HIGHLIGHT \ - 'syntax highlighting (no highlight)' \ + 'syntax highlighting (no highlight, unknown syntax)' \ 'git config gitweb.highlight yes && gitweb_run "p=.git;a=blob;f=file"' test_debug 'cat gitweb.log' test_expect_success HIGHLIGHT \ - 'syntax highlighting (highlighted)' \ + 'syntax highlighting (highlighted, shell script)' \ 'git config gitweb.highlight yes && echo "#!/usr/bin/sh" > test.sh && git add test.sh && diff --git a/t/t9700/test.pl b/t/t9700/test.pl index 671f38db2b..c15ca2d647 100755 --- a/t/t9700/test.pl +++ b/t/t9700/test.pl @@ -1,7 +1,7 @@ #!/usr/bin/perl use lib (split(/:/, $ENV{GITPERLLIB})); -use 5.006002; +use 5.008; use warnings; use strict; diff --git a/t/test-lib.sh b/t/test-lib.sh index 830e5e7360..48fa516004 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -238,14 +238,51 @@ test_set_editor () { } test_decode_color () { - sed -e 's/.\[1m/<WHITE>/g' \ - -e 's/.\[31m/<RED>/g' \ - -e 's/.\[32m/<GREEN>/g' \ - -e 's/.\[33m/<YELLOW>/g' \ - -e 's/.\[34m/<BLUE>/g' \ - -e 's/.\[35m/<MAGENTA>/g' \ - -e 's/.\[36m/<CYAN>/g' \ - -e 's/.\[m/<RESET>/g' + awk ' + function name(n) { + if (n == 0) return "RESET"; + if (n == 1) return "BOLD"; + if (n == 30) return "BLACK"; + if (n == 31) return "RED"; + if (n == 32) return "GREEN"; + if (n == 33) return "YELLOW"; + if (n == 34) return "BLUE"; + if (n == 35) return "MAGENTA"; + if (n == 36) return "CYAN"; + if (n == 37) return "WHITE"; + if (n == 40) return "BLACK"; + if (n == 41) return "BRED"; + if (n == 42) return "BGREEN"; + if (n == 43) return "BYELLOW"; + if (n == 44) return "BBLUE"; + if (n == 45) return "BMAGENTA"; + if (n == 46) return "BCYAN"; + if (n == 47) return "BWHITE"; + } + { + while (match($0, /\x1b\[[0-9;]*m/) != 0) { + printf "%s<", substr($0, 1, RSTART-1); + codes = substr($0, RSTART+2, RLENGTH-3); + if (length(codes) == 0) + printf "%s", name(0) + else { + n = split(codes, ary, ";"); + sep = ""; + for (i = 1; i <= n; i++) { + printf "%s%s", sep, name(ary[i]); + sep = ";" + } + } + printf ">"; + $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1); + } + print + } + ' +} + +nul_to_q () { + perl -pe 'y/\000/Q/' } q_to_nul () { @@ -268,6 +305,17 @@ remove_cr () { tr '\015' Q | sed -e 's/Q$//' } +# In some bourne shell implementations, the "unset" builtin returns +# nonzero status when a variable to be unset was not set in the first +# place. +# +# Use sane_unset when that should not be considered an error. + +sane_unset () { + unset "$@" + return 0 +} + test_tick () { if test -z "${test_tick+set}" then @@ -362,6 +410,15 @@ test_have_prereq () { test $total_prereq = $ok_prereq } +test_declared_prereq () { + case ",$test_prereq," in + *,$1,*) + return 0 + ;; + esac + return 1 +} + # You are not expected to call test_ok_ and test_failure_ directly, use # the text_expect_* functions instead. @@ -414,17 +471,17 @@ test_skip () { break esac done - if test -z "$to_skip" && test -n "$prereq" && - ! test_have_prereq "$prereq" + if test -z "$to_skip" && test -n "$test_prereq" && + ! test_have_prereq "$test_prereq" then to_skip=t fi case "$to_skip" in t) of_prereq= - if test "$missing_prereq" != "$prereq" + if test "$missing_prereq" != "$test_prereq" then - of_prereq=" of $prereq" + of_prereq=" of $test_prereq" fi say_color skip >&3 "skipping test: $@" @@ -438,9 +495,10 @@ test_skip () { } test_expect_failure () { - test "$#" = 3 && { prereq=$1; shift; } || prereq= + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-failure" + export test_prereq if ! test_skip "$@" then say >&3 "checking known breakage: $2" @@ -456,9 +514,10 @@ test_expect_failure () { } test_expect_success () { - test "$#" = 3 && { prereq=$1; shift; } || prereq= + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-success" + export test_prereq if ! test_skip "$@" then say >&3 "expecting success: $2" @@ -473,24 +532,6 @@ test_expect_success () { echo >&3 "" } -test_expect_code () { - test "$#" = 4 && { prereq=$1; shift; } || prereq= - test "$#" = 3 || - error "bug in the test script: not 3 or 4 parameters to test-expect-code" - if ! test_skip "$@" - then - say >&3 "expecting exit code $1: $3" - test_run_ "$3" - if [ "$?" = 0 -a "$eval_ret" = "$1" ] - then - test_ok_ "$2" - else - test_failure_ "$@" - fi - fi - echo >&3 "" -} - # test_external runs external test scripts that provide continuous # test output about their progress, and succeeds/fails on # zero/non-zero exit code. It outputs the test output on stdout even @@ -500,11 +541,12 @@ test_expect_code () { # Usage: test_external description command arguments... # Example: test_external 'Perl API' perl ../path/to/test.pl test_external () { - test "$#" = 4 && { prereq=$1; shift; } || prereq= + test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 3 || error >&5 "bug in the test script: not 3 or 4 parameters to test_external" descr="$1" shift + export test_prereq if ! test_skip "$descr" "$@" then # Announce the script to reduce confusion about the @@ -605,6 +647,28 @@ test_path_is_missing () { fi } +# test_line_count checks that a file has the number of lines it +# ought to. For example: +# +# test_expect_success 'produce exactly one line of output' ' +# do something >output && +# test_line_count = 1 output +# ' +# +# is like "test $(wc -l <output) = 1" except that it passes the +# output through when the number of lines is wrong. + +test_line_count () { + if test $# != 3 + then + error "bug in the test script: not 3 parameters to test_line_count" + elif ! test $(wc -l <"$3") "$1" "$2" + then + echo "test_line_count: line count for $3 !$1 $2" + cat "$3" + return 1 + fi +} # This is not among top-level (test_expect_success | test_expect_failure) # but is a prefix that can be used in the test script, like: @@ -658,6 +722,28 @@ test_might_fail () { return 0 } +# Similar to test_must_fail and test_might_fail, but check that a +# given command exited with a given exit code. Meant to be used as: +# +# test_expect_success 'Merge with d/f conflicts' ' +# test_expect_code 1 git merge "merge msg" B master +# ' + +test_expect_code () { + want_code=$1 + shift + "$@" + exit_code=$? + if test $exit_code = $want_code + then + echo >&2 "test_expect_code: command exited with $exit_code: $*" + return 0 + else + echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" + return 1 + fi +} + # test_cmp is a helper function to compare actual and expected output. # You can use it like: # @@ -970,11 +1056,13 @@ case $(uname -s) in # no POSIX permissions # backslashes in pathspec are converted to '/' # exec does not inherit the PID + test_set_prereq MINGW ;; *) test_set_prereq POSIXPERM test_set_prereq BSLASHPSPEC test_set_prereq EXECKEEPSPID + test_set_prereq NOT_MINGW ;; esac diff --git a/t/t7006/test-terminal.perl b/t/test-terminal.perl index 73ff809371..ee01eb957e 100755 --- a/t/t7006/test-terminal.perl +++ b/t/test-terminal.perl @@ -1,17 +1,19 @@ #!/usr/bin/perl +use 5.008; use strict; use warnings; use IO::Pty; use File::Copy; -# Run @$argv in the background with stdout redirected to $out. +# Run @$argv in the background with stdio redirected to $out and $err. sub start_child { - my ($argv, $out) = @_; + my ($argv, $out, $err) = @_; my $pid = fork; if (not defined $pid) { die "fork failed: $!" } elsif ($pid == 0) { open STDOUT, ">&", $out; + open STDERR, ">&", $err; close $out; exec(@$argv) or die "cannot exec '$argv->[0]': $!" } @@ -47,12 +49,28 @@ sub xsendfile { copy($in, $out, 4096) or $!{EIO} or die "cannot copy from child: $!"; } +sub copy_stdio { + my ($out, $err) = @_; + my $pid = fork; + defined $pid or die "fork failed: $!"; + if (!$pid) { + close($out); + xsendfile(\*STDERR, $err); + exit 0; + } + close($err); + xsendfile(\*STDOUT, $out); + finish_child($pid) == 0 + or exit 1; +} + if ($#ARGV < 1) { die "usage: test-terminal program args"; } -my $master = new IO::Pty; -my $slave = $master->slave; -my $pid = start_child(\@ARGV, $slave); -close $slave; -xsendfile(\*STDOUT, $master); +my $master_out = new IO::Pty; +my $master_err = new IO::Pty; +my $pid = start_child(\@ARGV, $master_out->slave, $master_err->slave); +close $master_out->slave; +close $master_err->slave; +copy_stdio($master_out, $master_err); exit(finish_child($pid)); |