diff options
Diffstat (limited to 't')
195 files changed, 5688 insertions, 2496 deletions
@@ -168,6 +168,16 @@ appropriately before running "make". Using this option with a RAM-based filesystem (such as tmpfs) can massively speed up the test suite. +--chain-lint:: +--no-chain-lint:: + If --chain-lint is enabled, the test harness will check each + test to make sure that it properly "&&-chains" all commands (so + that a failure in the middle does not go unnoticed by the final + exit code of the test). This check is performed in addition to + running the tests themselves. You may also enable or disable + this feature by setting the GIT_TEST_CHAIN_LINT environment + variable to "1" or "0", respectively. + You can also set the GIT_TEST_INSTALLED environment variable to the bindir of an existing git installation to test that installation. You still need to have built this git sandbox, from which various @@ -418,7 +428,8 @@ Don't: dies in an unexpected way (e.g. segfault). On the other hand, don't use test_must_fail for running regular - platform commands; just use '! cmd'. + platform commands; just use '! cmd'. We are not in the business + of verifying that the world given to us sanely works. - use perl without spelling it as "$PERL_PATH". This is to help our friends on Windows where the platform Perl often adds CR before diff --git a/t/annotate-tests.sh b/t/annotate-tests.sh index 071e4d7d3e..f5c01758ca 100644 --- a/t/annotate-tests.sh +++ b/t/annotate-tests.sh @@ -405,7 +405,7 @@ test_expect_success 'setup -L :regex' ' mv hello.c hello.orig && echo "#include <stdio.h>" >hello.c && cat hello.orig >>hello.c && - tr Q "\\t" >>hello.c <<-\EOF + tr Q "\\t" >>hello.c <<-\EOF && void mail() { Qputs("mail"); diff --git a/t/diff-lib.sh b/t/diff-lib.sh index 75a35fcd06..c211dc40ee 100644 --- a/t/diff-lib.sh +++ b/t/diff-lib.sh @@ -1,6 +1,6 @@ : -sanitize_diff_raw='/^:/s/ '"$_x40"' '"$_x40"' \([A-Z]\)[0-9]* / X X \1# /' +sanitize_diff_raw='/^:/s/ '"\($_x40\)"' '"\($_x40\)"' \([A-Z]\)[0-9]* / \1 \2 \3# /' compare_diff_raw () { # When heuristics are improved, the score numbers would change. # Ignore them while comparing. diff --git a/t/diff-lib/COPYING b/t/diff-lib/COPYING new file mode 100644 index 0000000000..6ff87c4664 --- /dev/null +++ b/t/diff-lib/COPYING @@ -0,0 +1,361 @@ + + Note that the only valid version of the GPL as far as this project + is concerned is _this_ particular version of the license (ie v2, not + v2.2 or v3.x or whatever), unless explicitly otherwise stated. + + HOWEVER, in order to allow a migration to GPLv3 if that seems like + a good idea, I also ask that people involved with the project make + their preferences known. In particular, if you trust me to make that + decision, you might note so in your copyright message, ie something + like + + This file is licensed under the GPL v2, or a later version + at the discretion of Linus. + + might avoid issues. But we can also just decide to synchronize and + contact all copyright holders on record if/when the occasion arises. + + Linus Torvalds + +---------------------------------------- + + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/t/diff-lib/README b/t/diff-lib/README new file mode 100644 index 0000000000..548142c327 --- /dev/null +++ b/t/diff-lib/README @@ -0,0 +1,46 @@ +//////////////////////////////////////////////////////////////// + + GIT - the stupid content tracker + +//////////////////////////////////////////////////////////////// + +"git" can mean anything, depending on your mood. + + - random three-letter combination that is pronounceable, and not + actually used by any common UNIX command. The fact that it is a + mispronunciation of "get" may or may not be relevant. + - stupid. contemptible and despicable. simple. Take your pick from the + dictionary of slang. + - "global information tracker": you're in a good mood, and it actually + works for you. Angels sing, and a light suddenly fills the room. + - "goddamn idiotic truckload of sh*t": when it breaks + +Git is a fast, scalable, distributed revision control system with an +unusually rich command set that provides both high-level operations +and full access to internals. + +Git is an Open Source project covered by the GNU General Public License. +It was originally written by Linus Torvalds with help of a group of +hackers around the net. It is currently maintained by Junio C Hamano. + +Please read the file INSTALL for installation instructions. +See Documentation/tutorial.txt to get started, then see +Documentation/everyday.txt for a useful minimum set of commands, +and "man git-commandname" for documentation of each command. +CVS users may also want to read Documentation/cvs-migration.txt. + +Many Git online resources are accessible from http://git.or.cz/ +including full documentation and Git related tools. + +The user discussion and development of Git take place on the Git +mailing list -- everyone is welcome to post bug reports, feature +requests, comments and patches to git@vger.kernel.org. To subscribe +to the list, send an email with just "subscribe git" in the body to +majordomo@vger.kernel.org. The mailing list archives are available at +http://marc.theaimsgroup.com/?l=git and other archival sites. + +The messages titled "A note from the maintainer", "What's in +git.git (stable)" and "What's cooking in git.git (topics)" and +the discussion following them on the mailing list give a good +reference for project status, development direction and +remaining tasks. diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index cd2baef383..db2ef22e8f 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -12,20 +12,43 @@ else say "Your version of gpg (1.0.6) is too buggy for testing" ;; *) - # key generation info: gpg --homedir t/lib-gpg --gen-key - # Type DSA and Elgamal, size 2048 bits, no expiration date. - # Name and email: C O Mitter <committer@example.com> + # Available key info: + # * Type DSA and Elgamal, size 2048 bits, no expiration date, + # name and email: C O Mitter <committer@example.com> + # * Type RSA, size 2048 bits, no expiration date, + # name and email: Eris Discordia <discord@example.net> # No password given, to enable non-interactive operation. - cp -R "$TEST_DIRECTORY"/lib-gpg ./gpghome - chmod 0700 gpghome - chmod 0600 gpghome/* - GNUPGHOME="$(pwd)/gpghome" - export GNUPGHOME + # To generate new key: + # gpg --homedir /tmp/gpghome --gen-key + # To write armored exported key to keyring: + # gpg --homedir /tmp/gpghome --export-secret-keys \ + # --armor 0xDEADBEEF >> lib-gpg/keyring.gpg + # gpg --homedir /tmp/gpghome --export \ + # --armor 0xDEADBEEF >> lib-gpg/keyring.gpg + # To export ownertrust: + # gpg --homedir /tmp/gpghome --export-ownertrust \ + # > lib-gpg/ownertrust + mkdir ./gpghome && + chmod 0700 ./gpghome && + GNUPGHOME="$(pwd)/gpghome" && + export GNUPGHOME && + gpg --homedir "${GNUPGHOME}" 2>/dev/null --import \ + "$TEST_DIRECTORY"/lib-gpg/keyring.gpg && + gpg --homedir "${GNUPGHOME}" 2>/dev/null --import-ownertrust \ + "$TEST_DIRECTORY"/lib-gpg/ownertrust && + gpg --homedir "${GNUPGHOME}" </dev/null >/dev/null 2>&1 \ + --sign -u committer@example.com && test_set_prereq GPG ;; esac fi +if test_have_prereq GPG && + echo | gpg --homedir "${GNUPGHOME}" -b --rfc1991 >/dev/null 2>&1 +then + test_set_prereq RFC1991 +fi + sanitize_pgp() { perl -ne ' /^-----END PGP/ and $in_pgp = 0; diff --git a/t/lib-gpg/keyring.gpg b/t/lib-gpg/keyring.gpg new file mode 100644 index 0000000000..d4754a1f19 --- /dev/null +++ b/t/lib-gpg/keyring.gpg @@ -0,0 +1,142 @@ +-----BEGIN PGP PRIVATE KEY BLOCK----- +Version: GnuPG v1 + +lQG7BEZnyykRBACzCPjIpTYNL7Y2tQqlEGTTDlvZcWNLjF5f7ZzuyOqNOidLUgFD +36qch1LZLSZkShdR3Gae+bsolyjxrlFuFP0eXRPMtqK20aLw7WZvPFpEV1ThMne+ +PRJjYrvghWw3L0VVIAIZ8GXwrVBuU99uEjHEI0ojYloOvFc2jVPgSaoBvwCg48Tj +fol2foSoJa7XUu9yAL8szg8D/RUsTzNF+I9hSRHl7MYKFMYoKEY9BDgrgAujp7YY +8qdGsiUb0Ggyzp2kRjZFt4lpcvKhGfHn5GEjmtk+fRbD5qPfMqKFW+T0NPfYlYmL +JJ4fs4qZ8Lx7x6iG6X51u+YNwsQuIGjMCC3CeNi3F7or651kkNYASbaQ1NROkCIN +NudyA/0aasvoZUoNJAc2cP5Ifs6WhXMWLfMR2p2XbfKwKNYneec60usnSComcKqh +sJVk0Gytvr3FOYVhRkXnKAbx+0W2urFP8OFVBTEKO6Ts2VygWGgneQYoHnqzwlUE +yjOjlr+lyf7u2s/KAxpKA6jnttEdRZAmzWkhuox1wwAUkr27/QAAn3TEzKR1pxxR ++R3dHuFpnnfatMIDC5O0IkMgTyBNaXR0ZXIgPGNvbW1pdHRlckBleGFtcGxlLmNv +bT6IXgQTEQIAHgUCRmfLKQIbAwYLCQgHAwIDFQIDAxYCAQIeAQIXgAAKCRATtvUe +zd5DDXQdAKC92f+wOrTkbmPEf+u+qA/Gv6BxQwCfQ128JXCi3MpMB8tI2Kmo15tY +gnmdAj0ERmfLThAIAM65eT9T6+gg0fJn+Qxhs3FFDPjxK6AOBS3SieWWmXO6stZZ +plvb7r2+sXYp8HMHntnOX3TRPolIx1dsdkv3W3w8yUzf9Lmo2XMPsZ3/isWdEbOI +A0rO3B1xwbQO7vEoWHeB7uyYIF6YsIH0pMqxkImciwB1tnJPB9OxqPHlD/HyyHr2 +voj6nmEGaPQWj8/dkfyenXm6XmNZUZL/slk6tRhNwv4cW3QQLh39nbiz9rqvZMKF +XX8wkY4FdQkJjCGwqzG+7yJcyHvem29/iq//jRLZgdiN8BwV3MCTJyDp8/Wb/d9y +jZcUm1RdtwRiwfhfQ+zmpyspm7OxINfH65rf7f8ABA0IALRiMRs/eOD59jrYXmPS +ZQUbiALlbJJtuP2c9N3WZ5OgrhDiAW+SDIN+hgDynJ9b7C2dE3xNaud4zaXAAF44 +J4J0bAo2ZtZoJajw+GXwaZfh4Z7nPNHwEcbFD4/uXPCj9jPkcLOJqGmUY1aXdygo +t3Hn5U/zo8JxPQ83YbJQhkzAOZ/HGowLNqKgGkLLHn1X9qay0CxlfTQeEN5RZyl3 +b4qRzGgGALFvoheyZIUw1TbjRpbn3kqlJooEQY02VwXFXfLI/LwzglilH6sSckvs +0WHKLZ+0L6b3CgJHN2RsZ7QxwCBi1aemsvr65FeEXp/AYxaG5duUbsugG8PgoJ06 +bsEAAVQNQO3cXWpuiJ/nNLLnWuPunBKJUlurkBdf2GD+m+muF0VpwDchhqqbTO4e +FqOISQQYEQIACQUCRmfLTgIbDAAKCRATtvUezd5DDcHsAKDQcoAtDWJFupVRqleB +Cezx4Q2khACcCs+/LtE8Lb9hC+2cvr3uH5p82AI= +=aEiU +-----END PGP PRIVATE KEY BLOCK----- +-----BEGIN PGP PRIVATE KEY BLOCK----- +Version: GnuPG v1 + +lQOYBFFMlkcBCADJi/xnAF8yI34PHilSCbM7VtOFO17oFMkpu4cgN2QpPuM5MVjy +cvrzKSguZFvPCDLzeAFJW1uPxL4SHaHSkisCrFhijH7OJWcOPNPSFCwu+inAoAsv +Hm4ns6pfDZyRjVTHSY4rdMISqKFRozaXu8vHeBRzIhFnubBCepKZW07oKPnrnELV +TVUSUVI+6el8JFmJIWxxLNLhfRRSPF0v4MDXPF//iCWiZDI+J1pLvQ5V/f7YtfsD +GV0oPY66J72BFJG555eKBttnNY901LmI3ocn5P5iVnXDaqMElw7FKpnANXucgY3H +4kLyNkI3s3J0CGbXI7b3MBWtjctuhWv1q2G5ABEBAAEAB/wLiuza/qEfv1Cfj7FQ +ytAXpz1YoAcrcM/53TeRQhrbvIee5ZNGhLdCkyot81QeuJrSaXO0E9CxRynrjQQ7 +ibYqN7Hy0uu1kAbQQJjmVdQXTKnKJ7Wm7oM4hYhNsVCKNXc+1+5AfDYGg4nZob36 +qqgHtc+Ardl5VfUg7uF+eZrnSMynjZANgikKbPtE09DKVtVOtUE4xTD9ijkpgn65 +glsZDqb7J4QVgTeEiCDKJsQvin3SwrPBqBxBRULF2TIaMbOwe6dHiiaI85rsvAWS +VGzonUB3IU1470P2SDIVczbXYUK/nDSGx6ZZ0wLu9ZcCyUPvxVEykuh2P4UWHla+ +nHLRBADMLavcfjsCI5CRUsdurYpgE8Y3bEbcDpvzAu5jT5D25p3YPDODOXD3AKTt +PzVMARVtv8twkbgAyWaoDevJz8OtmoSwsWjdFo4YvsYw9jV7Yf3GwzD3Ya1ZnW32 +JWQr6cX8qcK0AukAD7UZkVyhU2KBvB02t8lKHLbScHXTYVqrywQA/LNUXwmHji+6 +osnSQAC8X9ggMOEs9dGo7Qlk4JgfGAH17CFI3S3ubsaVEdxz3YwzOkD8SNmEbLyW +a7CZ/RnpdAZU0nB7kSfbfZl7ajhPbgKBMsaV2yvaDdJeor4m5eKdXffRk0SksxjL +Z/4P1tTIuL8WzetGB/aDcWDFgseSAAsEALzmf579ptlSmDyGRAKQqub+mj4V3EUZ +1GVGcfBY86w3BZVDsaRiCtcNjk/lcP4AZ1Vbb42RM6jk8nLsENRc7rf2xa7ZPf0T +6n5F6W+vk7EG76RoFhKVtGZngGKiDGVavxk3FT/yf8lKrT3wYiT03SZDuZ0pWvku +FiJGEyesAC8WRz60JEVyaXMgRGlzY29yZGlhIDxkaXNjb3JkQGV4YW1wbGUubmV0 +PokBOAQTAQIAIgUCUUyWRwIbAwYLCQgHAwIGFQgCCQoLBBYCAwECHgECF4AACgkQ +YQkuhbcicYlYowf7B+f+FDcLVfw8XzGlKku1F6PI1yGCt7AMO2/JkmO4LlgHuIgF +pqe5b/XjKl0IsRcbVLitqiIokc8u+7H8yYU67DDliq7t1gqBy+qThSHcgn6WMKTa +qCqOE2jzHyqulIAzQsJQ+c5SRofEZAKT4Qa2Dy+nsqWDpIE78aJd0Vnkk9U6H2Vu +ABvUeN/IMgvxPr525o+rBD7LU4J3CtOzfV+sO6+33da+Bm9UhkR4tC4H/n1dDN1J +YuxBQbgxTq/h8mKe4/7/Yvy+5WsYd96ZRLE2ZFWeWXtKkwmYbQ42G3SZUXaZ8R8O +tbTyUrjbFKipO4wvXwhyju1l9cxAsrca6xbSCJ0DmARRTJZHAQgAqTtPFcTXqM+U +o7bOoo+dcHi8XDf/8XSEmZfMKc/U5pSTBk7h1gSKuGzjF2n3wQm6A8+101vTLaQ6 +PoFDFW8uQB00mjymGrRDYFgz8bjhnaekZnA4XThr1ROjffgMhs3uTpCebdV+lL8K +0oJTHc39TPLTg23DFcRSDN+3ARJJS7+CRBIbt9L5gObpgA4HUap/o6N7O04rQOPU +83MAqnwo2JTO/Ded0zoad0Vo31Nmk4F+KvEE52ftGHbd7yqIUGKBt2SeTAh850ac +LeNZP+V1Y7atBCr7/zm+JpHWq9OH7/NomlEIkxL8WDt8GfAKoqZgqefL+ACEnLbA +t1du3f0FswARAQABAAf8DclaIQDfPM5kYo3y+YVPoykC11RskmQWpVibdlCLHJm/ +/ISSm1fVYT7lpTOpzl0XfVX/jw9s/cviPtNS/r0G/Iwki+gi9Av5bTDiUm/oWWqd +1waPYPDGwB4QdKOviY/fOSFI9tOsszt5Czs4wDXWy90AZDWd7fkHYisbgofV1sjK +Q8bYQPabcepcZ2JyET+EpZBEmUHHqQ76bTiqjN+Vz6k1OFlsEBzGkE+WIakAhkQ2 +57oUrRgFe+h6Ch7meB/v6vVfIRSsLpZe183uc4SigqtfsgjbG9PqOcAJOqovDncB +Scg3qvpWFOAkTA3Re+yBPUd2HHl9WF/TPa2kBDCT2QQAxcJZeUCuUgDgCizqEgfs +Kzm6dy4G/OJdW0q9m9psHqD1XWLd7ZLE4+eTS1cxktJiGcGNdGoZD0EtgxkV09uM +12QYCOBErFJzv4/4oledHeEhTaRR/mFFGRp+kWTz2Ai/zNqUd3D++DYUe8g4mVQJ +6JP014XhvoRnaCfT8cH9Zd0EANsSL70WGdifcVoWKA9jFJhahc0sSG6IZvMOc7bs +cSbhBqLEnheObkarBP+A+zgllqIf+sbCassMXjcV52mnl9th3J5RWr7scrQLJ9ZX +Ivz3uoP85vwlUI98dI9roYK0OpKmG4hNFppAcgiCVNVjnQlhuQ/HoexRHxRmnmcb +38jPA/sEHPCFbLCGOSB+HQNKx/5Wf6VpFX/4oBNbIUiYoxcRl0jpYT7Lc0zbc8So +HthjPfWhXhKzYvEDC5YgASEy1cNbGMUJcGyuAInwIQjq44FSwRMkI3ISSHnbv1iH +0wBVJUzpluMebEAesdZUz1DcZWVf6eVJD0dhZxD6DoG7Xj1m9ThUiQEfBBgBAgAJ +BQJRTJZHAhsMAAoJEGEJLoW3InGJ7HEIAMXkMf4cOWmnAuvvcSm3KpLghuWik9dy +fn1sY/IG5atoKK+ypmV/TlBlMZqFQzuPIJQT8VLbmxtLlDhJG04LbI6c8axIZxOO +ZKLy5nTTSy16ztqEeS7eifHLPZg1UFFyEEIQ1XW0CNDAeuWKh90ERjyl4Cg7PnWS +Z9Ei+zj6JD5Pcdi3BJhQo9WOLOVEJ0NHmewTYqk9QVXH/0v1Hdl4LMJtgcbdbDWk +4UTkXbg9pn3umCgkNJ3Vs8fWnIWO9Izdr2/wrFY2JvUT7Yvl+wsNIWatvOEzGy7n +BOW78WUxzhu0YJTLKy+iKCjg5HS5dx6OC+e4aEEgfhNPCMkbvDsJjtQ= +=hieJ +-----END PGP PRIVATE KEY BLOCK----- +-----BEGIN PGP PUBLIC KEY BLOCK----- +Version: GnuPG v1 + +mQGiBEZnyykRBACzCPjIpTYNL7Y2tQqlEGTTDlvZcWNLjF5f7ZzuyOqNOidLUgFD +36qch1LZLSZkShdR3Gae+bsolyjxrlFuFP0eXRPMtqK20aLw7WZvPFpEV1ThMne+ +PRJjYrvghWw3L0VVIAIZ8GXwrVBuU99uEjHEI0ojYloOvFc2jVPgSaoBvwCg48Tj +fol2foSoJa7XUu9yAL8szg8D/RUsTzNF+I9hSRHl7MYKFMYoKEY9BDgrgAujp7YY +8qdGsiUb0Ggyzp2kRjZFt4lpcvKhGfHn5GEjmtk+fRbD5qPfMqKFW+T0NPfYlYmL +JJ4fs4qZ8Lx7x6iG6X51u+YNwsQuIGjMCC3CeNi3F7or651kkNYASbaQ1NROkCIN +NudyA/0aasvoZUoNJAc2cP5Ifs6WhXMWLfMR2p2XbfKwKNYneec60usnSComcKqh +sJVk0Gytvr3FOYVhRkXnKAbx+0W2urFP8OFVBTEKO6Ts2VygWGgneQYoHnqzwlUE +yjOjlr+lyf7u2s/KAxpKA6jnttEdRZAmzWkhuox1wwAUkr27/bQiQyBPIE1pdHRl +ciA8Y29tbWl0dGVyQGV4YW1wbGUuY29tPoheBBMRAgAeBQJGZ8spAhsDBgsJCAcD +AgMVAgMDFgIBAh4BAheAAAoJEBO29R7N3kMNdB0AoL3Z/7A6tORuY8R/676oD8a/ +oHFDAJ9DXbwlcKLcykwHy0jYqajXm1iCebkCDQRGZ8tOEAgAzrl5P1Pr6CDR8mf5 +DGGzcUUM+PEroA4FLdKJ5ZaZc7qy1lmmW9vuvb6xdinwcwee2c5fdNE+iUjHV2x2 +S/dbfDzJTN/0uajZcw+xnf+KxZ0Rs4gDSs7cHXHBtA7u8ShYd4Hu7JggXpiwgfSk +yrGQiZyLAHW2ck8H07Go8eUP8fLIeva+iPqeYQZo9BaPz92R/J6debpeY1lRkv+y +WTq1GE3C/hxbdBAuHf2duLP2uq9kwoVdfzCRjgV1CQmMIbCrMb7vIlzIe96bb3+K +r/+NEtmB2I3wHBXcwJMnIOnz9Zv933KNlxSbVF23BGLB+F9D7OanKymbs7Eg18fr +mt/t/wAEDQgAtGIxGz944Pn2OtheY9JlBRuIAuVskm24/Zz03dZnk6CuEOIBb5IM +g36GAPKcn1vsLZ0TfE1q53jNpcAAXjgngnRsCjZm1mglqPD4ZfBpl+Hhnuc80fAR +xsUPj+5c8KP2M+Rws4moaZRjVpd3KCi3ceflT/OjwnE9DzdhslCGTMA5n8cajAs2 +oqAaQssefVf2prLQLGV9NB4Q3lFnKXdvipHMaAYAsW+iF7JkhTDVNuNGlufeSqUm +igRBjTZXBcVd8sj8vDOCWKUfqxJyS+zRYcotn7QvpvcKAkc3ZGxntDHAIGLVp6ay ++vrkV4Ren8BjFobl25Ruy6Abw+CgnTpuwYhJBBgRAgAJBQJGZ8tOAhsMAAoJEBO2 +9R7N3kMNwewAoNBygC0NYkW6lVGqV4EJ7PHhDaSEAJwKz78u0Twtv2EL7Zy+ve4f +mnzYApkBDQRRTJZHAQgAyYv8ZwBfMiN+Dx4pUgmzO1bThTte6BTJKbuHIDdkKT7j +OTFY8nL68ykoLmRbzwgy83gBSVtbj8S+Eh2h0pIrAqxYYox+ziVnDjzT0hQsLvop +wKALLx5uJ7OqXw2ckY1Ux0mOK3TCEqihUaM2l7vLx3gUcyIRZ7mwQnqSmVtO6Cj5 +65xC1U1VElFSPunpfCRZiSFscSzS4X0UUjxdL+DA1zxf/4glomQyPidaS70OVf3+ +2LX7AxldKD2Ouie9gRSRueeXigbbZzWPdNS5iN6HJ+T+YlZ1w2qjBJcOxSqZwDV7 +nIGNx+JC8jZCN7NydAhm1yO29zAVrY3LboVr9athuQARAQABtCRFcmlzIERpc2Nv +cmRpYSA8ZGlzY29yZEBleGFtcGxlLm5ldD6JATgEEwECACIFAlFMlkcCGwMGCwkI +BwMCBhUIAgkKCwQWAgMBAh4BAheAAAoJEGEJLoW3InGJWKMH+wfn/hQ3C1X8PF8x +pSpLtRejyNchgrewDDtvyZJjuC5YB7iIBaanuW/14ypdCLEXG1S4raoiKJHPLvux +/MmFOuww5Yqu7dYKgcvqk4Uh3IJ+ljCk2qgqjhNo8x8qrpSAM0LCUPnOUkaHxGQC +k+EGtg8vp7Klg6SBO/GiXdFZ5JPVOh9lbgAb1HjfyDIL8T6+duaPqwQ+y1OCdwrT +s31frDuvt93WvgZvVIZEeLQuB/59XQzdSWLsQUG4MU6v4fJinuP+/2L8vuVrGHfe +mUSxNmRVnll7SpMJmG0ONht0mVF2mfEfDrW08lK42xSoqTuML18Ico7tZfXMQLK3 +GusW0gi5AQ0EUUyWRwEIAKk7TxXE16jPlKO2zqKPnXB4vFw3//F0hJmXzCnP1OaU +kwZO4dYEirhs4xdp98EJugPPtdNb0y2kOj6BQxVvLkAdNJo8phq0Q2BYM/G44Z2n +pGZwOF04a9UTo334DIbN7k6Qnm3VfpS/CtKCUx3N/Uzy04NtwxXEUgzftwESSUu/ +gkQSG7fS+YDm6YAOB1Gqf6OjeztOK0Dj1PNzAKp8KNiUzvw3ndM6GndFaN9TZpOB +firxBOdn7Rh23e8qiFBigbdknkwIfOdGnC3jWT/ldWO2rQQq+/85viaR1qvTh+/z +aJpRCJMS/Fg7fBnwCqKmYKnny/gAhJy2wLdXbt39BbMAEQEAAYkBHwQYAQIACQUC +UUyWRwIbDAAKCRBhCS6FtyJxiexxCADF5DH+HDlppwLr73EptyqS4IblopPXcn59 +bGPyBuWraCivsqZlf05QZTGahUM7jyCUE/FS25sbS5Q4SRtOC2yOnPGsSGcTjmSi +8uZ000stes7ahHku3onxyz2YNVBRchBCENV1tAjQwHrliofdBEY8peAoOz51kmfR +Ivs4+iQ+T3HYtwSYUKPVjizlRCdDR5nsE2KpPUFVx/9L9R3ZeCzCbYHG3Ww1pOFE +5F24PaZ97pgoJDSd1bPH1pyFjvSM3a9v8KxWNib1E+2L5fsLDSFmrbzhMxsu5wTl +u/FlMc4btGCUyysvoigo4OR0uXcejgvnuGhBIH4TTwjJG7w7CY7U +=iYv/ +-----END PGP PUBLIC KEY BLOCK----- diff --git a/t/lib-gpg/ownertrust b/t/lib-gpg/ownertrust new file mode 100644 index 0000000000..b3e3c4f1cd --- /dev/null +++ b/t/lib-gpg/ownertrust @@ -0,0 +1,4 @@ +# List of assigned trustvalues, created Thu 11 Dec 2014 01:26:28 PM CET +# (Use "gpg --import-ownertrust" to restore them) +73D758744BE721698EC54E8713B6F51ECDDE430D:6: +D4BE22311AD3131E5EDA29A461092E85B7227189:3: diff --git a/t/lib-gpg/pubring.gpg b/t/lib-gpg/pubring.gpg Binary files differdeleted file mode 100644 index 1a3c2d487c..0000000000 --- a/t/lib-gpg/pubring.gpg +++ /dev/null diff --git a/t/lib-gpg/random_seed b/t/lib-gpg/random_seed Binary files differdeleted file mode 100644 index 95d249f15f..0000000000 --- a/t/lib-gpg/random_seed +++ /dev/null diff --git a/t/lib-gpg/secring.gpg b/t/lib-gpg/secring.gpg Binary files differdeleted file mode 100644 index 82dca8f80b..0000000000 --- a/t/lib-gpg/secring.gpg +++ /dev/null diff --git a/t/lib-gpg/trustdb.gpg b/t/lib-gpg/trustdb.gpg Binary files differdeleted file mode 100644 index 4879ae9a84..0000000000 --- a/t/lib-gpg/trustdb.gpg +++ /dev/null diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index fd53b57187..e9714467d0 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -30,6 +30,18 @@ # Copyright (c) 2008 Clemens Buchacher <drizzd@aon.at> # +if test -n "$NO_CURL" +then + skip_all='skipping test, git built without http support' + test_done +fi + +if test -n "$NO_EXPAT" && test -n "$LIB_HTTPD_DAV" +then + skip_all='skipping test, git built without expat support' + test_done +fi + test_tristate GIT_TEST_HTTPD if test "$GIT_TEST_HTTPD" = false then @@ -37,7 +49,7 @@ then test_done fi -if ! test_have_prereq SANITY; then +if ! test_have_prereq NOT_ROOT; then test_skip_or_die $GIT_TEST_HTTPD \ "Cannot run httpd tests as root" fi @@ -79,6 +91,7 @@ HTTPD_DOCUMENT_ROOT_PATH=$HTTPD_ROOT_PATH/www # hack to suppress apache PassEnv warnings GIT_VALGRIND=$GIT_VALGRIND; export GIT_VALGRIND GIT_VALGRIND_OPTIONS=$GIT_VALGRIND_OPTIONS; export GIT_VALGRIND_OPTIONS +GIT_TRACE=$GIT_TRACE; export GIT_TRACE if ! test -x "$LIB_HTTPD_PATH" then diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 7713dd2609..0b81a0047b 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -69,6 +69,8 @@ LockFile accept.lock PassEnv GIT_VALGRIND PassEnv GIT_VALGRIND_OPTIONS PassEnv GNUPGHOME +PassEnv ASAN_OPTIONS +PassEnv GIT_TRACE Alias /dumb/ www/ Alias /auth/dumb/ www/auth/dumb/ diff --git a/t/lib-terminal.sh b/t/lib-terminal.sh index 51845491bb..cd220e378e 100644 --- a/t/lib-terminal.sh +++ b/t/lib-terminal.sh @@ -1,7 +1,7 @@ # Helpers for terminal output tests. # Catch tests which should depend on TTY but forgot to. There's no need -# to aditionally check that the TTY prereq is set here. If the test declared +# to additionally check that the TTY prereq is set here. If the test declared # it and we are running the test, then it must have been set. test_terminal () { if ! test_declared_prereq TTY diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh index a8c9574291..5cf74eddec 100644 --- a/t/perf/perf-lib.sh +++ b/t/perf/perf-lib.sh @@ -91,7 +91,7 @@ test_perf_create_repo_from () { */objects|*/hooks|*/config) ;; *) - cp -R "$stuff" . || break + cp -R "$stuff" . || exit 1 ;; esac done && diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index f10ba4a01e..79b9074172 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -253,7 +253,7 @@ test_expect_success 'test --verbose' ' test_expect_success "failing test" false test_done EOF - mv test-verbose/out test-verbose/out+ + mv test-verbose/out test-verbose/out+ && grep -v "^Initialized empty" test-verbose/out+ >test-verbose/out && check_sub_test_lib_test test-verbose <<-\EOF > expecting success: true @@ -974,7 +974,7 @@ test_expect_success 'writing this tree with --missing-ok' ' ################################################################ test_expect_success 'git read-tree followed by write-tree should be idempotent' ' - rm -f .git/index + rm -f .git/index && git read-tree $tree && test -f .git/index && newtree=$(git write-tree) && diff --git a/t/t0005-signals.sh b/t/t0005-signals.sh index aeea50c633..e7f27ebbc1 100755 --- a/t/t0005-signals.sh +++ b/t/t0005-signals.sh @@ -10,8 +10,8 @@ one EOF test_expect_success 'sigchain works' ' - test-sigchain >actual - case "$?" in + { test-sigchain >actual; ret=$?; } && + case "$ret" in 143) true ;; # POSIX w/ SIGTERM=15 271) true ;; # ksh w/ SIGTERM=15 3) true ;; # Windows @@ -40,12 +40,12 @@ test_expect_success 'create blob' ' ' test_expect_success !MINGW 'a constipated git dies with SIGPIPE' ' - OUT=$( ((large_git; echo $? 1>&3) | :) 3>&1 ) + OUT=$( ((large_git; echo $? 1>&3) | :) 3>&1 ) && test "$OUT" -eq 141 ' test_expect_success !MINGW 'a constipated git dies with SIGPIPE even if parent ignores it' ' - OUT=$( ((trap "" PIPE; large_git; echo $? 1>&3) | :) 3>&1 ) + OUT=$( ((trap "" PIPE; large_git; echo $? 1>&3) | :) 3>&1 ) && test "$OUT" -eq 141 ' diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index 8dc6939b90..4ef5ed484c 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -831,4 +831,14 @@ test_expect_success !MINGW,!CYGWIN 'correct handling of backslashes' ' test_cmp err.expect err ' +test_expect_success 'info/exclude trumps core.excludesfile' ' + echo >>global-excludes usually-ignored && + echo >>.git/info/exclude "!usually-ignored" && + >usually-ignored && + echo "?? usually-ignored" >expect && + + git status --porcelain usually-ignored >actual && + test_cmp expect actual +' + test_done diff --git a/t/t0011-hashmap.sh b/t/t0011-hashmap.sh index f97c80556f..9c217d948c 100755 --- a/t/t0011-hashmap.sh +++ b/t/t0011-hashmap.sh @@ -218,7 +218,7 @@ test_expect_success 'grow / shrink' ' echo size >> in && echo 64 51 >> expect && echo put key52 value52 >> in && - echo NULL >> expect + echo NULL >> expect && echo size >> in && echo 256 52 >> expect && for n in $(test_seq 12) diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index d2e51a81bc..f94120a894 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -8,6 +8,13 @@ has_cr() { tr '\015' Q <"$1" | grep Q >/dev/null } +# add or remove CRs to disk file in-place +# usage: munge_cr <append|remove> <file> +munge_cr () { + "${1}_cr" <"$2" >tmp && + mv tmp "$2" +} + test_expect_success setup ' git config core.autocrlf false && @@ -28,9 +35,7 @@ test_expect_success setup ' for w in Some extra lines here; do echo $w; done >>one && git diff >patch.file && patched=$(git hash-object --stdin <one) && - git read-tree --reset -u HEAD && - - echo happy. + git read-tree --reset -u HEAD ' test_expect_success 'safecrlf: autocrlf=input, all CRLF' ' @@ -100,22 +105,11 @@ test_expect_success 'update with autocrlf=input' ' rm -f tmp one dir/two three && git read-tree --reset -u HEAD && git config core.autocrlf input && - - for f in one dir/two - do - append_cr <$f >tmp && mv -f tmp $f && - git update-index -- $f || { - echo Oops - false - break - } - done && - + munge_cr append one && + munge_cr append dir/two && + git update-index -- one dir/two && differs=$(git diff-index --cached HEAD) && - test -z "$differs" || { - echo Oops "$differs" - false - } + verbose test -z "$differs" ' @@ -124,22 +118,11 @@ test_expect_success 'update with autocrlf=true' ' rm -f tmp one dir/two three && git read-tree --reset -u HEAD && git config core.autocrlf true && - - for f in one dir/two - do - append_cr <$f >tmp && mv -f tmp $f && - git update-index -- $f || { - echo "Oops $f" - false - break - } - done && - + munge_cr append one && + munge_cr append dir/two && + git update-index -- one dir/two && differs=$(git diff-index --cached HEAD) && - test -z "$differs" || { - echo Oops "$differs" - false - } + verbose test -z "$differs" ' @@ -148,23 +131,13 @@ test_expect_success 'checkout with autocrlf=true' ' rm -f tmp one dir/two three && git config core.autocrlf true && git read-tree --reset -u HEAD && - - for f in one dir/two - do - remove_cr <"$f" >tmp && mv -f tmp $f && - git update-index -- $f || { - echo "Eh? $f" - false - break - } - done && + munge_cr remove one && + munge_cr remove dir/two && + git update-index -- one dir/two && test "$one" = $(git hash-object --stdin <one) && test "$two" = $(git hash-object --stdin <dir/two) && differs=$(git diff-index --cached HEAD) && - test -z "$differs" || { - echo Oops "$differs" - false - } + verbose test -z "$differs" ' test_expect_success 'checkout with autocrlf=input' ' @@ -172,25 +145,13 @@ test_expect_success 'checkout with autocrlf=input' ' rm -f tmp one dir/two three && git config core.autocrlf input && git read-tree --reset -u HEAD && - - for f in one dir/two - do - if has_cr "$f" - then - echo "Eh? $f" - false - break - else - git update-index -- $f - fi - done && + test_must_fail has_cr one && + test_must_fail has_cr two && + git update-index -- one dir/two && test "$one" = $(git hash-object --stdin <one) && test "$two" = $(git hash-object --stdin <dir/two) && differs=$(git diff-index --cached HEAD) && - test -z "$differs" || { - echo Oops "$differs" - false - } + verbose test -z "$differs" ' test_expect_success 'apply patch (autocrlf=input)' ' @@ -200,10 +161,7 @@ test_expect_success 'apply patch (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply patch.file && - test "$patched" = "$(git hash-object --stdin <one)" || { - echo "Eh? apply without index" - false - } + verbose test "$patched" = "$(git hash-object --stdin <one)" ' test_expect_success 'apply patch --cached (autocrlf=input)' ' @@ -213,10 +171,7 @@ test_expect_success 'apply patch --cached (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply --cached patch.file && - test "$patched" = $(git rev-parse :one) || { - echo "Eh? apply with --cached" - false - } + verbose test "$patched" = $(git rev-parse :one) ' test_expect_success 'apply patch --index (autocrlf=input)' ' @@ -226,11 +181,8 @@ test_expect_success 'apply patch --index (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply --index patch.file && - test "$patched" = $(git rev-parse :one) && - test "$patched" = $(git hash-object --stdin <one) || { - echo "Eh? apply with --index" - false - } + verbose test "$patched" = $(git rev-parse :one) && + verbose test "$patched" = $(git hash-object --stdin <one) ' test_expect_success 'apply patch (autocrlf=true)' ' @@ -240,10 +192,7 @@ test_expect_success 'apply patch (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply patch.file && - test "$patched" = "$(remove_cr <one | git hash-object --stdin)" || { - echo "Eh? apply without index" - false - } + verbose test "$patched" = "$(remove_cr <one | git hash-object --stdin)" ' test_expect_success 'apply patch --cached (autocrlf=true)' ' @@ -253,10 +202,7 @@ test_expect_success 'apply patch --cached (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply --cached patch.file && - test "$patched" = $(git rev-parse :one) || { - echo "Eh? apply without index" - false - } + verbose test "$patched" = $(git rev-parse :one) ' test_expect_success 'apply patch --index (autocrlf=true)' ' @@ -266,11 +212,8 @@ test_expect_success 'apply patch --index (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply --index patch.file && - test "$patched" = $(git rev-parse :one) && - test "$patched" = "$(remove_cr <one | git hash-object --stdin)" || { - echo "Eh? apply with --index" - false - } + verbose test "$patched" = $(git rev-parse :one) && + verbose test "$patched" = "$(remove_cr <one | git hash-object --stdin)" ' test_expect_success '.gitattributes says two is binary' ' @@ -280,29 +223,9 @@ test_expect_success '.gitattributes says two is binary' ' git config core.autocrlf true && git read-tree --reset -u HEAD && - if has_cr dir/two - then - echo "Huh?" - false - else - : happy - fi && - - if has_cr one - then - : happy - else - echo "Huh?" - false - fi && - - if has_cr three - then - echo "Huh?" - false - else - : happy - fi + test_must_fail has_cr dir/two && + verbose has_cr one && + test_must_fail has_cr three ' test_expect_success '.gitattributes says two is input' ' @@ -311,13 +234,7 @@ test_expect_success '.gitattributes says two is input' ' echo "two crlf=input" >.gitattributes && git read-tree --reset -u HEAD && - if has_cr dir/two - then - echo "Huh?" - false - else - : happy - fi + test_must_fail has_cr dir/two ' test_expect_success '.gitattributes says two and three are text' ' @@ -326,21 +243,8 @@ test_expect_success '.gitattributes says two and three are text' ' echo "t* crlf" >.gitattributes && git read-tree --reset -u HEAD && - if has_cr dir/two - then - : happy - else - echo "Huh?" - false - fi && - - if has_cr three - then - : happy - else - echo "Huh?" - false - fi + verbose has_cr dir/two && + verbose has_cr three ' test_expect_success 'in-tree .gitattributes (1)' ' @@ -352,17 +256,8 @@ test_expect_success 'in-tree .gitattributes (1)' ' rm -rf tmp one dir .gitattributes patch.file three && git read-tree --reset -u HEAD && - if has_cr one - then - echo "Eh? one should not have CRLF" - false - else - : happy - fi && - has_cr three || { - echo "Eh? three should still have CRLF" - false - } + test_must_fail has_cr one && + verbose has_cr three ' test_expect_success 'in-tree .gitattributes (2)' ' @@ -371,17 +266,8 @@ test_expect_success 'in-tree .gitattributes (2)' ' git read-tree --reset HEAD && git checkout-index -f -q -u -a && - if has_cr one - then - echo "Eh? one should not have CRLF" - false - else - : happy - fi && - has_cr three || { - echo "Eh? three should still have CRLF" - false - } + test_must_fail has_cr one && + verbose has_cr three ' test_expect_success 'in-tree .gitattributes (3)' ' @@ -391,17 +277,8 @@ test_expect_success 'in-tree .gitattributes (3)' ' git checkout-index -u .gitattributes && git checkout-index -u one dir/two three && - if has_cr one - then - echo "Eh? one should not have CRLF" - false - else - : happy - fi && - has_cr three || { - echo "Eh? three should still have CRLF" - false - } + test_must_fail has_cr one && + verbose has_cr three ' test_expect_success 'in-tree .gitattributes (4)' ' @@ -411,17 +288,8 @@ test_expect_success 'in-tree .gitattributes (4)' ' git checkout-index -u one dir/two three && git checkout-index -u .gitattributes && - if has_cr one - then - echo "Eh? one should not have CRLF" - false - else - : happy - fi && - has_cr three || { - echo "Eh? three should still have CRLF" - false - } + test_must_fail has_cr one && + verbose has_cr three ' test_expect_success 'checkout with existing .gitattributes' ' diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index ca7d2a630a..e9f1626b09 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -216,4 +216,30 @@ test_expect_success EXPENSIVE 'filter large file' ' ! test -s err ' +test_expect_success "filter: clean empty file" ' + git config filter.in-repo-header.clean "echo cleaned && cat" && + git config filter.in-repo-header.smudge "sed 1d" && + + echo "empty-in-worktree filter=in-repo-header" >>.gitattributes && + >empty-in-worktree && + + echo cleaned >expected && + git add empty-in-worktree && + git show :empty-in-worktree >actual && + test_cmp expected actual +' + +test_expect_success "filter: smudge empty file" ' + git config filter.empty-in-repo.clean "cat >/dev/null" && + git config filter.empty-in-repo.smudge "echo smudged && cat" && + + echo "empty-in-repo filter=empty-in-repo" >>.gitattributes && + echo dead data walking >empty-in-repo && + git add empty-in-repo && + + echo smudged >expected && + git checkout-index --prefix=filtered- empty-in-repo && + test_cmp expected filtered-empty-in-repo +' + test_done diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh index 2a4a6c1226..452320df83 100755 --- a/t/t0027-auto-crlf.sh +++ b/t/t0027-auto-crlf.sh @@ -55,16 +55,41 @@ create_gitattributes () { esac } +check_warning () { + case "$1" in + LF_CRLF) grep "LF will be replaced by CRLF" $2;; + CRLF_LF) grep "CRLF will be replaced by LF" $2;; + '') + >expect + grep "will be replaced by" $2 >actual + test_cmp expect actual + ;; + *) false ;; + esac +} + create_file_in_repo () { crlf=$1 attr=$2 + lfname=$3 + crlfname=$4 + lfmixcrlf=$5 + lfmixcr=$6 + crlfnul=$7 create_gitattributes "$attr" && + pfx=crlf_${crlf}_attr_${attr} for f in LF CRLF LF_mix_CR CRLF_mix_LF CRLF_nul do - pfx=crlf_${crlf}_attr_${attr}_$f.txt && - cp $f $pfx && git -c core.autocrlf=$crlf add $pfx + fname=${pfx}_$f.txt && + cp $f $fname && + git -c core.autocrlf=$crlf add $fname 2>"${pfx}_$f.err" done && - git commit -m "core.autocrlf $crlf" + git commit -m "core.autocrlf $crlf" && + check_warning "$lfname" ${pfx}_LF.err && + check_warning "$crlfname" ${pfx}_CRLF.err && + check_warning "$lfmixcrlf" ${pfx}_CRLF_mix_LF.err && + check_warning "$lfmixcr" ${pfx}_LF_mix_CR.err && + check_warning "$crlfnul" ${pfx}_CRLF_nul.err } check_files_in_repo () { @@ -140,22 +165,47 @@ test_expect_success 'setup master' ' ' -test_expect_success 'create files' ' - create_file_in_repo false "" && - create_file_in_repo true "" && - create_file_in_repo input "" && - create_file_in_repo false "auto" && - create_file_in_repo true "auto" && - create_file_in_repo input "auto" && +warn_LF_CRLF="LF will be replaced by CRLF" +warn_CRLF_LF="CRLF will be replaced by LF" + +test_expect_success 'add files empty attr' ' + create_file_in_repo false "" "" "" "" "" "" && + create_file_in_repo true "" "LF_CRLF" "" "LF_CRLF" "" "" && + create_file_in_repo input "" "" "CRLF_LF" "CRLF_LF" "" "" +' + +test_expect_success 'add files attr=auto' ' + create_file_in_repo false "auto" "" "CRLF_LF" "CRLF_LF" "" "" && + create_file_in_repo true "auto" "LF_CRLF" "" "LF_CRLF" "" "" && + create_file_in_repo input "auto" "" "CRLF_LF" "CRLF_LF" "" "" +' + +test_expect_success 'add files attr=text' ' + create_file_in_repo false "text" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + create_file_in_repo true "text" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && + create_file_in_repo input "text" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" +' + +test_expect_success 'add files attr=-text' ' + create_file_in_repo false "-text" "" "" "" "" "" && + create_file_in_repo true "-text" "" "" "" "" "" && + create_file_in_repo input "-text" "" "" "" "" "" +' + +test_expect_success 'add files attr=lf' ' + create_file_in_repo false "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + create_file_in_repo true "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + create_file_in_repo input "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" +' - create_file_in_repo false "text" && - create_file_in_repo true "text" && - create_file_in_repo input "text" && +test_expect_success 'add files attr=crlf' ' + create_file_in_repo false "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && + create_file_in_repo true "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && + create_file_in_repo input "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" +' - create_file_in_repo false "-text" && - create_file_in_repo true "-text" && - create_file_in_repo input "-text" && +test_expect_success 'create files cleanup' ' rm -f *.txt && git reset --hard ' diff --git a/t/t0030-stripspace.sh b/t/t0030-stripspace.sh index 0333dd9875..29e91d861c 100755 --- a/t/t0030-stripspace.sh +++ b/t/t0030-stripspace.sh @@ -432,4 +432,10 @@ test_expect_success '-c with changed comment char' ' test_cmp expect actual ' +test_expect_success 'avoid SP-HT sequence in commented line' ' + printf "#\tone\n#\n# two\n" >expect && + printf "\tone\n\ntwo\n" | git stripspace -c >actual && + test_cmp expect actual +' + test_done diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index a90c86bfa3..b044785175 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -172,12 +172,9 @@ test_expect_success 'long options' ' ' test_expect_success 'missing required value' ' - test-parse-options -s; - test $? = 129 && - test-parse-options --string; - test $? = 129 && - test-parse-options --file; - test $? = 129 + test_expect_code 129 test-parse-options -s && + test_expect_code 129 test-parse-options --string && + test_expect_code 129 test-parse-options --file ' cat > expect << EOF @@ -227,8 +224,7 @@ test_expect_success 'unambiguously abbreviated option with "="' ' ' test_expect_success 'ambiguously abbreviated option' ' - test-parse-options --strin 123; - test $? = 129 + test_expect_code 129 test-parse-options --strin 123 ' cat > expect << EOF diff --git a/t/t0050-filesystem.sh b/t/t0050-filesystem.sh index 6b3cedcf24..b29d749bb7 100755 --- a/t/t0050-filesystem.sh +++ b/t/t0050-filesystem.sh @@ -33,16 +33,20 @@ test_expect_success "detection of case insensitive filesystem during repo init" ' else test_expect_success "detection of case insensitive filesystem during repo init" ' - test_must_fail git config --bool core.ignorecase >/dev/null || - test $(git config --bool core.ignorecase) = false + { + test_must_fail git config --bool core.ignorecase >/dev/null || + test $(git config --bool core.ignorecase) = false + } ' fi if test_have_prereq SYMLINKS then test_expect_success "detection of filesystem w/o symlink support during repo init" ' - test_must_fail git config --bool core.symlinks || - test "$(git config --bool core.symlinks)" = true + { + test_must_fail git config --bool core.symlinks || + test "$(git config --bool core.symlinks)" = true + } ' else test_expect_success "detection of filesystem w/o symlink support during repo init" ' @@ -64,7 +68,7 @@ test_expect_success "setup case tests" ' git checkout -f master ' -$test_case 'rename (case change)' ' +test_expect_success 'rename (case change)' ' git mv camelcase CamelCase && git commit -m "rename" ' diff --git a/t/t0056-git-C.sh b/t/t0056-git-C.sh index 99c037703a..2630e756da 100755 --- a/t/t0056-git-C.sh +++ b/t/t0056-git-C.sh @@ -14,6 +14,16 @@ test_expect_success '"git -C <path>" runs git from the directory <path>' ' test_cmp expected actual ' +test_expect_success '"git -C <path>" with an empty <path> is a no-op' ' + ( + mkdir -p dir1/subdir && + cd dir1/subdir && + git -C "" rev-parse --show-prefix >actual && + echo subdir/ >expect && + test_cmp expect actual + ) +' + test_expect_success 'Multiple -C options: "-C dir1 -C dir2" is equivalent to "-C dir1/dir2"' ' test_create_repo dir1/dir2 && echo 1 >dir1/dir2/b.txt && diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index 17e969df60..9acf628726 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -34,7 +34,7 @@ test_expect_success POSIXPERM 'run_command reports EACCES' ' grep "fatal: cannot exec.*hello.sh" err ' -test_expect_success POSIXPERM 'unreadable directory in PATH' ' +test_expect_success POSIXPERM,SANITY 'unreadable directory in PATH' ' mkdir local-command && test_when_finished "chmod u+rwx local-command && rm -fr local-command" && git config alias.nitfol "!echo frotz" && diff --git a/t/t0062-revision-walking.sh b/t/t0062-revision-walking.sh index 3d98eb847f..113c728e67 100755 --- a/t/t0062-revision-walking.sh +++ b/t/t0062-revision-walking.sh @@ -26,7 +26,7 @@ test_expect_success 'setup' ' ' test_expect_success 'revision walking can be done twice' ' - test-revision-walking run-twice > run_twice_actual + test-revision-walking run-twice >run_twice_actual && test_cmp run_twice_expected run_twice_actual ' diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh index 067f4c6e52..601d02d71f 100755 --- a/t/t0090-cache-tree.sh +++ b/t/t0090-cache-tree.sh @@ -22,7 +22,7 @@ generate_expected_cache_tree_rec () { # ls-files might have foo/bar, foo/bar/baz, and foo/bar/quux # We want to count only foo because it's the only direct child subtrees=$(git ls-files|grep /|cut -d / -f 1|uniq) && - subtree_count=$(echo "$subtrees"|awk -v c=0 '$1 {++c} END {print c}') && + subtree_count=$(echo "$subtrees"|awk -v c=0 '$1 != "" {++c} END {print c}') && entries=$(git ls-files|wc -l) && printf "SHA $dir (%d entries, %d subtrees)\n" "$entries" "$subtree_count" && for subtree in $subtrees diff --git a/t/t0201-gettext-fallbacks.sh b/t/t0201-gettext-fallbacks.sh index 5d80a985fb..90da1c7ddc 100755 --- a/t/t0201-gettext-fallbacks.sh +++ b/t/t0201-gettext-fallbacks.sh @@ -50,17 +50,17 @@ test_expect_success 'eval_gettext: our eval_gettext() fallback can interpolate v test_expect_success 'eval_gettext: our eval_gettext() fallback can interpolate variables with spaces' ' cmdline="git am" && - export cmdline; + export cmdline && printf "When you have resolved this problem, run git am --resolved." >expect && - eval_gettext "When you have resolved this problem, run \$cmdline --resolved." >actual + eval_gettext "When you have resolved this problem, run \$cmdline --resolved." >actual && test_i18ncmp expect actual ' test_expect_success 'eval_gettext: our eval_gettext() fallback can interpolate variables with spaces and quotes' ' cmdline="git am" && - export cmdline; + export cmdline && printf "When you have resolved this problem, run \"git am --resolved\"." >expect && - eval_gettext "When you have resolved this problem, run \"\$cmdline --resolved\"." >actual + eval_gettext "When you have resolved this problem, run \"\$cmdline --resolved\"." >actual && test_i18ncmp expect actual ' diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index 57ea5a10c5..d7ef44b4a2 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -289,4 +289,13 @@ test_expect_success 'http paths can be part of context' ' EOF ' +test_expect_success 'helpers can abort the process' ' + test_must_fail git \ + -c credential.helper="!f() { echo quit=1; }; f" \ + -c credential.helper="verbatim foo bar" \ + credential fill >stdout && + >expect && + test_cmp expect stdout +' + test_done diff --git a/t/t0302-credential-store.sh b/t/t0302-credential-store.sh index f61b40c69b..0979df93a1 100755 --- a/t/t0302-credential-store.sh +++ b/t/t0302-credential-store.sh @@ -6,4 +6,118 @@ test_description='credential-store tests' helper_test store +test_expect_success 'when xdg file does not exist, xdg file not created' ' + test_path_is_missing "$HOME/.config/git/credentials" && + test -s "$HOME/.git-credentials" +' + +test_expect_success 'setup xdg file' ' + rm -f "$HOME/.git-credentials" && + mkdir -p "$HOME/.config/git" && + >"$HOME/.config/git/credentials" +' + +helper_test store + +test_expect_success 'when xdg file exists, home file not created' ' + test -s "$HOME/.config/git/credentials" && + test_path_is_missing "$HOME/.git-credentials" +' + +test_expect_success 'setup custom xdg file' ' + rm -f "$HOME/.git-credentials" && + rm -f "$HOME/.config/git/credentials" && + mkdir -p "$HOME/xdg/git" && + >"$HOME/xdg/git/credentials" +' + +XDG_CONFIG_HOME="$HOME/xdg" +export XDG_CONFIG_HOME +helper_test store +unset XDG_CONFIG_HOME + +test_expect_success 'if custom xdg file exists, home and xdg files not created' ' + test_when_finished "rm -f $HOME/xdg/git/credentials" && + test -s "$HOME/xdg/git/credentials" && + test_path_is_missing "$HOME/.git-credentials" && + test_path_is_missing "$HOME/.config/git/credentials" +' + +test_expect_success 'get: use home file if both home and xdg files have matches' ' + echo "https://home-user:home-pass@example.com" >"$HOME/.git-credentials" && + mkdir -p "$HOME/.config/git" && + echo "https://xdg-user:xdg-pass@example.com" >"$HOME/.config/git/credentials" && + check fill store <<-\EOF + protocol=https + host=example.com + -- + protocol=https + host=example.com + username=home-user + password=home-pass + -- + EOF +' + +test_expect_success 'get: use xdg file if home file has no matches' ' + >"$HOME/.git-credentials" && + mkdir -p "$HOME/.config/git" && + echo "https://xdg-user:xdg-pass@example.com" >"$HOME/.config/git/credentials" && + check fill store <<-\EOF + protocol=https + host=example.com + -- + protocol=https + host=example.com + username=xdg-user + password=xdg-pass + -- + EOF +' + +test_expect_success POSIXPERM 'get: use xdg file if home file is unreadable' ' + echo "https://home-user:home-pass@example.com" >"$HOME/.git-credentials" && + chmod -r "$HOME/.git-credentials" && + mkdir -p "$HOME/.config/git" && + echo "https://xdg-user:xdg-pass@example.com" >"$HOME/.config/git/credentials" && + check fill store <<-\EOF + protocol=https + host=example.com + -- + protocol=https + host=example.com + username=xdg-user + password=xdg-pass + -- + EOF +' + +test_expect_success 'store: if both xdg and home files exist, only store in home file' ' + >"$HOME/.git-credentials" && + mkdir -p "$HOME/.config/git" && + >"$HOME/.config/git/credentials" && + check approve store <<-\EOF && + protocol=https + host=example.com + username=store-user + password=store-pass + EOF + echo "https://store-user:store-pass@example.com" >expected && + test_cmp expected "$HOME/.git-credentials" && + test_must_be_empty "$HOME/.config/git/credentials" +' + + +test_expect_success 'erase: erase matching credentials from both xdg and home files' ' + echo "https://home-user:home-pass@example.com" >"$HOME/.git-credentials" && + mkdir -p "$HOME/.config/git" && + echo "https://xdg-user:xdg-pass@example.com" >"$HOME/.config/git/credentials" && + check reject store <<-\EOF && + protocol=https + host=example.com + EOF + test_must_be_empty "$HOME/.git-credentials" && + test_must_be_empty "$HOME/.config/git/credentials" +' + test_done diff --git a/t/t1002-read-tree-m-u-2way.sh b/t/t1002-read-tree-m-u-2way.sh index fed877b20f..e3bf821694 100755 --- a/t/t1002-read-tree-m-u-2way.sh +++ b/t/t1002-read-tree-m-u-2way.sh @@ -75,8 +75,8 @@ test_expect_success \ echo yomin >yomin && git update-index --add yomin && read_tree_u_must_succeed -m -u $treeH $treeM && - git ls-files --stage >4.out || return 1 - git diff -U0 --no-index M.out 4.out >4diff.out + git ls-files --stage >4.out && + test_might_fail git diff -U0 --no-index M.out 4.out >4diff.out && compare_change 4diff.out expected && check_cache_at yomin clean && sum bozbar frotz nitfol >actual4.sum && @@ -94,8 +94,8 @@ test_expect_success \ git update-index --add yomin && echo yomin yomin >yomin && read_tree_u_must_succeed -m -u $treeH $treeM && - git ls-files --stage >5.out || return 1 - git diff -U0 --no-index M.out 5.out >5diff.out + git ls-files --stage >5.out && + test_might_fail git diff -U0 --no-index M.out 5.out >5diff.out && compare_change 5diff.out expected && check_cache_at yomin dirty && sum bozbar frotz nitfol >actual5.sum && diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index a72e700ae4..ab36b1eb72 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -274,7 +274,7 @@ test_expect_success 'setup blobs which are likely to delta' ' ' test_expect_success 'confirm that neither loose blob is a delta' ' - cat >expect <<-EOF + cat >expect <<-EOF && $_z40 $_z40 EOF diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh index f83df8eb8b..7d2baa15bb 100755 --- a/t/t1007-hash-object.sh +++ b/t/t1007-hash-object.sh @@ -201,4 +201,23 @@ test_expect_success 'corrupt tag' ' test_must_fail git hash-object -t tag --stdin </dev/null ' +test_expect_success 'hash-object complains about bogus type name' ' + test_must_fail git hash-object -t bogus --stdin </dev/null +' + +test_expect_success 'hash-object complains about truncated type name' ' + test_must_fail git hash-object -t bl --stdin </dev/null +' + +test_expect_success '--literally' ' + t=1234567890 && + echo example | git hash-object -t $t --literally --stdin +' + +test_expect_success '--literally with extra-long type' ' + t=12345678901234567890123456789012345678901234567890 && + t="$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t$t" && + echo example | git hash-object -t $t --literally --stdin +' + test_done diff --git a/t/t1020-subdirectory.sh b/t/t1020-subdirectory.sh index 2edb4f2de5..8e22b03cdd 100755 --- a/t/t1020-subdirectory.sh +++ b/t/t1020-subdirectory.sh @@ -162,16 +162,20 @@ test_expect_success 'no file/rev ambiguity check inside .git' ' ) ' -test_expect_success 'no file/rev ambiguity check inside a bare repo' ' +test_expect_success 'no file/rev ambiguity check inside a bare repo (explicit GIT_DIR)' ' + test_when_finished "rm -fr foo.git" && git clone -s --bare .git foo.git && ( cd foo.git && + # older Git needed help by exporting GIT_DIR=. + # to realize that it is inside a bare repository. + # We keep this test around for regression testing. GIT_DIR=. git show -s HEAD ) ' -# This still does not work as it should... -: test_expect_success 'no file/rev ambiguity check inside a bare repo' ' +test_expect_success 'no file/rev ambiguity check inside a bare repo' ' + test_when_finished "rm -fr foo.git" && git clone -s --bare .git foo.git && ( cd foo.git && @@ -180,7 +184,6 @@ test_expect_success 'no file/rev ambiguity check inside a bare repo' ' ' test_expect_success SYMLINKS 'detection should not be fooled by a symlink' ' - rm -fr foo.git && git clone -s .git another && ln -s another yetanother && ( diff --git a/t/t1050-large.sh b/t/t1050-large.sh index f5a9119290..f9f3d1391f 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -9,10 +9,10 @@ test_expect_success setup ' # clone does not allow us to pass core.bigfilethreshold to # new repos, so set core.bigfilethreshold globally git config --global core.bigfilethreshold 200k && - echo X | dd of=large1 bs=1k seek=2000 && - echo X | dd of=large2 bs=1k seek=2000 && - echo X | dd of=large3 bs=1k seek=2000 && - echo Y | dd of=huge bs=1k seek=2500 && + printf "%2000000s" X >large1 && + cp large1 large2 && + cp large1 large3 && + printf "%2500000s" Y >huge && GIT_ALLOC_LIMIT=1500k && export GIT_ALLOC_LIMIT ' @@ -61,7 +61,7 @@ test_expect_success 'checkout a large file' ' large1=$(git rev-parse :large1) && git update-index --add --cacheinfo 100644 $large1 another && git checkout another && - cmp large1 another ;# this must not be test_cmp + test_cmp large1 another ' test_expect_success 'packsize limit' ' @@ -162,7 +162,7 @@ test_expect_success 'pack-objects with large loose object' ' test_create_repo packed && mv pack-* packed/.git/objects/pack && GIT_DIR=packed/.git git cat-file blob $SHA1 >actual && - cmp huge actual + test_cmp huge actual ' test_expect_success 'tar achiving' ' diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 938fc8bfd7..66dd28644f 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -677,7 +677,7 @@ test_expect_success 'invalid unit' ' echo 1auto >expect && git config aninvalid.unit >actual && test_cmp expect actual && - cat >expect <<-\EOF + cat >expect <<-\EOF && fatal: bad numeric config value '\''1auto'\'' for '\''aninvalid.unit'\'' in .git/config: invalid unit EOF test_must_fail git config --int --get aninvalid.unit 2>actual && @@ -1165,7 +1165,7 @@ test_expect_failure 'adding a key into an empty section reuses header' ' Qkey = value EOF - git config section.key value + git config section.key value && test_cmp expect .git/config ' diff --git a/t/t1301-shared-repo.sh b/t/t1301-shared-repo.sh index de42d21c92..ac10875408 100755 --- a/t/t1301-shared-repo.sh +++ b/t/t1301-shared-repo.sh @@ -12,12 +12,11 @@ setfacl -k . 2>/dev/null # User must have read permissions to the repo -> failure on --shared=0400 test_expect_success 'shared = 0400 (faulty permission u-w)' ' + test_when_finished "rm -rf sub" && mkdir sub && ( - cd sub && git init --shared=0400 + cd sub && + test_must_fail git init --shared=0400 ) - ret="$?" - rm -rf sub - test $ret != "0" ' modebits () { @@ -33,7 +32,7 @@ do git init --shared=1 && test 1 = "$(git config core.sharedrepository)" ) && - actual=$(ls -l sub/.git/HEAD) + actual=$(ls -l sub/.git/HEAD) && case "$actual" in -rw-rw-r--*) : happy @@ -90,10 +89,8 @@ do rm -f .git/info/refs && git update-server-info && actual="$(modebits .git/info/refs)" && - test "x$actual" = "x-$y" || { - ls -lt .git/info - false - } + verbose test "x$actual" = "x-$y" + ' umask 077 && @@ -102,16 +99,24 @@ do rm -f .git/info/refs && git update-server-info && actual="$(modebits .git/info/refs)" && - test "x$actual" = "x-$x" || { - ls -lt .git/info - false - } + verbose test "x$actual" = "x-$x" ' done +test_expect_success POSIXPERM 'info/refs respects umask in unshared repo' ' + rm -f .git/info/refs && + test_unconfig core.sharedrepository && + umask 002 && + git update-server-info && + echo "-rw-rw-r--" >expect && + modebits .git/info/refs >actual && + test_cmp expect actual +' + test_expect_success POSIXPERM 'git reflog expire honors core.sharedRepository' ' + umask 077 && git config core.sharedRepository group && git reflog expire --all && actual="$(ls -l .git/logs/refs/heads/master)" && diff --git a/t/t1307-config-blob.sh b/t/t1307-config-blob.sh index fdc257e66f..3c6791e6be 100755 --- a/t/t1307-config-blob.sh +++ b/t/t1307-config-blob.sh @@ -67,4 +67,13 @@ test_expect_success 'parse errors in blobs are properly attributed' ' grep "HEAD:config" err ' +test_expect_success 'can parse blob ending with CR' ' + printf "[some]key = value\\r" >config && + git add config && + git commit -m CR && + echo value >expect && + git config --blob=HEAD:config some.key >actual && + test_cmp expect actual +' + test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index 7b4707b776..ba89f4c009 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -519,7 +519,7 @@ test_expect_success 'stdin create ref works with path with space to blob' ' test_expect_success 'stdin update ref fails with wrong old value' ' echo "update $c $m $m~1" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: Cannot lock the ref '"'"'$c'"'"'" err && + grep "fatal: Cannot lock ref '"'"'$c'"'"'" err && test_must_fail git rev-parse --verify -q $c ' @@ -555,7 +555,7 @@ test_expect_success 'stdin update ref works with right old value' ' test_expect_success 'stdin delete ref fails with wrong old value' ' echo "delete $a $m~1" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: Cannot lock the ref '"'"'$a'"'"'" err && + grep "fatal: Cannot lock ref '"'"'$a'"'"'" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual @@ -619,6 +619,52 @@ test_expect_success 'stdin update/create/verify combination works' ' test_must_fail git rev-parse --verify -q $c ' +test_expect_success 'stdin verify succeeds for correct value' ' + git rev-parse $m >expect && + echo "verify $m $m" >stdin && + git update-ref --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin verify succeeds for missing reference' ' + echo "verify refs/heads/missing $Z" >stdin && + git update-ref --stdin <stdin && + test_must_fail git rev-parse --verify -q refs/heads/missing +' + +test_expect_success 'stdin verify treats no value as missing' ' + echo "verify refs/heads/missing" >stdin && + git update-ref --stdin <stdin && + test_must_fail git rev-parse --verify -q refs/heads/missing +' + +test_expect_success 'stdin verify fails for wrong value' ' + git rev-parse $m >expect && + echo "verify $m $m~1" >stdin && + test_must_fail git update-ref --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin verify fails for mistaken null value' ' + git rev-parse $m >expect && + echo "verify $m $Z" >stdin && + test_must_fail git update-ref --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin verify fails for mistaken empty value' ' + M=$(git rev-parse $m) && + test_when_finished "git update-ref $m $M" && + git rev-parse $m >expect && + echo "verify $m" >stdin && + test_must_fail git update-ref --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + test_expect_success 'stdin update refs works with identity updates' ' cat >stdin <<-EOF && update $a $m $m @@ -642,7 +688,7 @@ test_expect_success 'stdin update refs fails with wrong old value' ' update $c '' EOF test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: Cannot lock the ref '"'"'$c'"'"'" err && + grep "fatal: Cannot lock ref '"'"'$c'"'"'" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual && @@ -837,7 +883,7 @@ test_expect_success 'stdin -z create ref works with path with space to blob' ' test_expect_success 'stdin -z update ref fails with wrong old value' ' printf $F "update $c" "$m" "$m~1" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: Cannot lock the ref '"'"'$c'"'"'" err && + grep "fatal: Cannot lock ref '"'"'$c'"'"'" err && test_must_fail git rev-parse --verify -q $c ' @@ -853,7 +899,7 @@ test_expect_success 'stdin -z create ref fails when ref exists' ' git rev-parse "$c" >expect && printf $F "create $c" "$m~1" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: Cannot lock the ref '"'"'$c'"'"'" err && + grep "fatal: Cannot lock ref '"'"'$c'"'"'" err && git rev-parse "$c" >actual && test_cmp expect actual ' @@ -884,7 +930,7 @@ test_expect_success 'stdin -z update ref works with right old value' ' test_expect_success 'stdin -z delete ref fails with wrong old value' ' printf $F "delete $a" "$m~1" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: Cannot lock the ref '"'"'$a'"'"'" err && + grep "fatal: Cannot lock ref '"'"'$a'"'"'" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual @@ -938,6 +984,52 @@ test_expect_success 'stdin -z update/create/verify combination works' ' test_must_fail git rev-parse --verify -q $c ' +test_expect_success 'stdin -z verify succeeds for correct value' ' + git rev-parse $m >expect && + printf $F "verify $m" "$m" >stdin && + git update-ref -z --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin -z verify succeeds for missing reference' ' + printf $F "verify refs/heads/missing" "$Z" >stdin && + git update-ref -z --stdin <stdin && + test_must_fail git rev-parse --verify -q refs/heads/missing +' + +test_expect_success 'stdin -z verify treats no value as missing' ' + printf $F "verify refs/heads/missing" "" >stdin && + git update-ref -z --stdin <stdin && + test_must_fail git rev-parse --verify -q refs/heads/missing +' + +test_expect_success 'stdin -z verify fails for wrong value' ' + git rev-parse $m >expect && + printf $F "verify $m" "$m~1" >stdin && + test_must_fail git update-ref -z --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin -z verify fails for mistaken null value' ' + git rev-parse $m >expect && + printf $F "verify $m" "$Z" >stdin && + test_must_fail git update-ref -z --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin -z verify fails for mistaken empty value' ' + M=$(git rev-parse $m) && + test_when_finished "git update-ref $m $M" && + git rev-parse $m >expect && + printf $F "verify $m" "" >stdin && + test_must_fail git update-ref -z --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + test_expect_success 'stdin -z update refs works with identity updates' ' printf $F "update $a" "$m" "$m" "update $b" "$m" "$m" "update $c" "$Z" "" >stdin && git update-ref -z --stdin <stdin && @@ -953,7 +1045,7 @@ test_expect_success 'stdin -z update refs fails with wrong old value' ' git update-ref $c $m && printf $F "update $a" "$m" "$m" "update $b" "$m" "$m" "update $c" "$m" "$Z" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: Cannot lock the ref '"'"'$c'"'"'" err && + grep "fatal: Cannot lock ref '"'"'$c'"'"'" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual && @@ -973,4 +1065,32 @@ test_expect_success 'stdin -z delete refs works with packed and loose refs' ' test_must_fail git rev-parse --verify -q $c ' +run_with_limited_open_files () { + (ulimit -n 32 && "$@") +} + +test_lazy_prereq ULIMIT_FILE_DESCRIPTORS 'run_with_limited_open_files true' + +test_expect_success ULIMIT_FILE_DESCRIPTORS 'large transaction creating branches does not burst open file limit' ' +( + for i in $(test_seq 33) + do + echo "create refs/heads/$i HEAD" + done >large_input && + run_with_limited_open_files git update-ref --stdin <large_input && + git rev-parse --verify -q refs/heads/33 +) +' + +test_expect_success ULIMIT_FILE_DESCRIPTORS 'large transaction deleting branches does not burst open file limit' ' +( + for i in $(test_seq 33) + do + echo "delete refs/heads/$i HEAD" + done >large_input && + run_with_limited_open_files git update-ref --stdin <large_input && + test_must_fail git rev-parse --verify -q refs/heads/33 +) +' + test_done diff --git a/t/t1403-show-ref.sh b/t/t1403-show-ref.sh index 3e500ed7da..7e10bcfe39 100755 --- a/t/t1403-show-ref.sh +++ b/t/t1403-show-ref.sh @@ -28,7 +28,7 @@ test_expect_success 'show-ref' ' >expect && - test_must_fail git show-ref D >actual + test_must_fail git show-ref D >actual && test_cmp expect actual ' @@ -62,7 +62,7 @@ test_expect_success 'show-ref --verify' ' test_must_fail git show-ref --verify tags/A >actual && test_cmp expect actual && - test_must_fail git show-ref --verify D >actual + test_must_fail git show-ref --verify D >actual && test_cmp expect actual ' @@ -78,7 +78,7 @@ test_expect_success 'show-ref --verify -q' ' test_must_fail git show-ref --verify -q tags/A >actual && test_cmp expect actual && - test_must_fail git show-ref --verify -q D >actual + test_must_fail git show-ref --verify -q D >actual && test_cmp expect actual ' @@ -105,10 +105,10 @@ test_expect_success 'show-ref -d' ' test_cmp expect actual && git show-ref -d refs/heads/master >actual && - test_cmp expect actual + test_cmp expect actual && git show-ref -d --verify refs/heads/master >actual && - test_cmp expect actual + test_cmp expect actual && >expect && diff --git a/t/t1404-update-ref-df-conflicts.sh b/t/t1404-update-ref-df-conflicts.sh new file mode 100755 index 0000000000..66bafb5cf4 --- /dev/null +++ b/t/t1404-update-ref-df-conflicts.sh @@ -0,0 +1,107 @@ +#!/bin/sh + +test_description='Test git update-ref with D/F conflicts' +. ./test-lib.sh + +test_update_rejected () { + prefix="$1" && + before="$2" && + pack="$3" && + create="$4" && + error="$5" && + printf "create $prefix/%s $C\n" $before | + git update-ref --stdin && + git for-each-ref $prefix >unchanged && + if $pack + then + git pack-refs --all + fi && + printf "create $prefix/%s $C\n" $create >input && + test_must_fail git update-ref --stdin <input 2>output.err && + grep -F "$error" output.err && + git for-each-ref $prefix >actual && + test_cmp unchanged actual +} + +Q="'" + +test_expect_success 'setup' ' + + git commit --allow-empty -m Initial && + C=$(git rev-parse HEAD) + +' + +test_expect_success 'existing loose ref is a simple prefix of new' ' + + prefix=refs/1l && + test_update_rejected $prefix "a c e" false "b c/x d" \ + "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" + +' + +test_expect_success 'existing packed ref is a simple prefix of new' ' + + prefix=refs/1p && + test_update_rejected $prefix "a c e" true "b c/x d" \ + "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" + +' + +test_expect_success 'existing loose ref is a deeper prefix of new' ' + + prefix=refs/2l && + test_update_rejected $prefix "a c e" false "b c/x/y d" \ + "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" + +' + +test_expect_success 'existing packed ref is a deeper prefix of new' ' + + prefix=refs/2p && + test_update_rejected $prefix "a c e" true "b c/x/y d" \ + "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" + +' + +test_expect_success 'new ref is a simple prefix of existing loose' ' + + prefix=refs/3l && + test_update_rejected $prefix "a c/x e" false "b c d" \ + "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" + +' + +test_expect_success 'new ref is a simple prefix of existing packed' ' + + prefix=refs/3p && + test_update_rejected $prefix "a c/x e" true "b c d" \ + "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" + +' + +test_expect_success 'new ref is a deeper prefix of existing loose' ' + + prefix=refs/4l && + test_update_rejected $prefix "a c/x/y e" false "b c d" \ + "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" + +' + +test_expect_success 'new ref is a deeper prefix of existing packed' ' + + prefix=refs/4p && + test_update_rejected $prefix "a c/x/y e" true "b c d" \ + "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" + +' + +test_expect_success 'one new ref is a simple prefix of another' ' + + prefix=refs/5 && + test_update_rejected $prefix "a e" false "b c c/x d" \ + "cannot process $Q$prefix/c$Q and $Q$prefix/c/x$Q at the same time" + +' + +test_done diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 793aee9f0b..cfb32b6242 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -229,8 +229,12 @@ test_expect_success 'tag with incorrect tag name & missing tagger' ' echo $tag >.git/refs/tags/wrong && test_when_finished "git update-ref -d refs/tags/wrong" && git fsck --tags 2>out && - grep "invalid .tag. name" out && - grep "expected .tagger. line" out + + cat >expect <<-EOF && + warning in tag $tag: invalid '\''tag'\'' name: wrong name format + warning in tag $tag: invalid format - expected '\''tagger'\'' line + EOF + test_cmp expect out ' test_expect_success 'tag with bad tagger' ' diff --git a/t/t1509-root-worktree.sh b/t/t1509-root-worktree.sh index 335420fd87..b6977d4b39 100755 --- a/t/t1509-root-worktree.sh +++ b/t/t1509-root-worktree.sh @@ -98,8 +98,16 @@ test_foobar_foobar() { ' } -if ! test_have_prereq POSIXPERM || ! [ -w / ]; then - skip_all="Dangerous test skipped. Read this test if you want to execute it" +if ! test -w / +then + skip_all="Test requiring writable / skipped. Read this test if you want to run it" + test_done +fi + +if test -e /refs || test -e /objects || test -e /info || test -e /hooks || + test -e /.git || test -e /foo || test -e /me +then + skip_all="Skip test that clobbers existing files in /" test_done fi @@ -108,8 +116,9 @@ if [ "$IKNOWWHATIAMDOING" != "YES" ]; then test_done fi -if [ "$UID" = 0 ]; then - skip_all="No you can't run this with root" +if ! test_have_prereq NOT_ROOT +then + skip_all="No you can't run this as root" test_done fi diff --git a/t/t1509/prepare-chroot.sh b/t/t1509/prepare-chroot.sh index 62691172e3..6d47e2c725 100755 --- a/t/t1509/prepare-chroot.sh +++ b/t/t1509/prepare-chroot.sh @@ -14,25 +14,45 @@ xmkdir() { R="$1" +[ "$(id -u)" -eq 0 ] && die "This script should not be run as root, what if it does rm -rf /?" [ -n "$R" ] || die "usage: prepare-chroot.sh <root>" [ -x git ] || die "This script needs to be executed at git source code's top directory" -[ -x /bin/busybox ] || die "You need busybox" +if [ -x /bin/busybox ]; then + BB=/bin/busybox +elif [ -x /usr/bin/busybox ]; then + BB=/usr/bin/busybox +else + die "You need busybox" +fi xmkdir "$R" "$R/bin" "$R/etc" "$R/lib" "$R/dev" -[ -c "$R/dev/null" ] || die "/dev/null is missing. Do mknod $R/dev/null c 1 3 && chmod 666 $R/dev/null" +touch "$R/dev/null" echo "root:x:0:0:root:/:/bin/sh" > "$R/etc/passwd" echo "$(id -nu):x:$(id -u):$(id -g)::$(pwd)/t:/bin/sh" >> "$R/etc/passwd" echo "root::0:root" > "$R/etc/group" echo "$(id -ng)::$(id -g):$(id -nu)" >> "$R/etc/group" -[ -x "$R/bin/busybox" ] || cp /bin/busybox "$R/bin/busybox" -[ -x "$R/bin/sh" ] || ln -s /bin/busybox "$R/bin/sh" -[ -x "$R/bin/su" ] || ln -s /bin/busybox "$R/bin/su" +[ -x "$R$BB" ] || cp $BB "$R/bin/busybox" +for cmd in sh su ls expr tr basename rm mkdir mv id uname dirname cat true sed diff; do + ln -f -s /bin/busybox "$R/bin/$cmd" +done mkdir -p "$R$(pwd)" rsync --exclude-from t/t1509/excludes -Ha . "$R$(pwd)" -ldd git | grep '/' | sed 's,.*\s\(/[^ ]*\).*,\1,' | while read i; do - mkdir -p "$R$(dirname $i)" - cp "$i" "$R/$i" +# Fake perl to reduce dependency, t1509 does not use perl, but some +# env might slip through, see test-lib.sh, unset.*PERL_PATH +sed 's|^PERL_PATH=.*|PERL_PATH=/bin/true|' GIT-BUILD-OPTIONS > "$R$(pwd)/GIT-BUILD-OPTIONS" +for cmd in git $BB;do + ldd $cmd | grep '/' | sed 's,.*\s\(/[^ ]*\).*,\1,' | while read i; do + mkdir -p "$R$(dirname $i)" + cp "$i" "$R/$i" + done done -echo "Execute this in root: 'chroot $R /bin/su - $(id -nu)'" +cat <<EOF +All is set up in $R, execute t1509 with the following commands: + +sudo chroot $R /bin/su - $(id -nu) +IKNOWWHATIAMDOING=YES ./t1509-root-worktree.sh -v -i + +When you are done, simply delete $R to clean up +EOF diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index 94fb473e7c..193d55c3f4 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -10,9 +10,18 @@ sane_unset GIT_TEST_SPLIT_INDEX test_expect_success 'enable split index' ' git update-index --split-index && test-dump-split-index .git/index >actual && + indexversion=$(test-index-version <.git/index) && + if test "$indexversion" = "4" + then + own=432ef4b63f32193984f339431fd50ca796493569 + base=508851a7f0dfa8691e9f69c7f055865389012491 + else + own=8299b0bcd1ac364e5f1d7768efb62fa2da79a339 + base=39d890139ee5356c7ef572216cebcd27aa41f9df + fi && cat >expect <<EOF && -own 8299b0bcd1ac364e5f1d7768efb62fa2da79a339 -base 39d890139ee5356c7ef572216cebcd27aa41f9df +own $own +base $base replacements: deletions: EOF @@ -30,7 +39,7 @@ EOF test-dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<EOF && -base 39d890139ee5356c7ef572216cebcd27aa41f9df +base $base 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one replacements: deletions: @@ -182,7 +191,7 @@ test_expect_success 'unify index, two files remain' ' 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two EOF - test_cmp ls-files.expect ls-files.actual + test_cmp ls-files.expect ls-files.actual && test-dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<EOF && diff --git a/t/t2004-checkout-cache-temp.sh b/t/t2004-checkout-cache-temp.sh index f171a5578b..a12afe93f3 100755 --- a/t/t2004-checkout-cache-temp.sh +++ b/t/t2004-checkout-cache-temp.sh @@ -10,202 +10,212 @@ rather than the tracked path.' . ./test-lib.sh -test_expect_success \ -'preparation' ' -mkdir asubdir && -echo tree1path0 >path0 && -echo tree1path1 >path1 && -echo tree1path3 >path3 && -echo tree1path4 >path4 && -echo tree1asubdir/path5 >asubdir/path5 && -git update-index --add path0 path1 path3 path4 asubdir/path5 && -t1=$(git write-tree) && -rm -f path* .merge_* out .git/index && -echo tree2path0 >path0 && -echo tree2path1 >path1 && -echo tree2path2 >path2 && -echo tree2path4 >path4 && -git update-index --add path0 path1 path2 path4 && -t2=$(git write-tree) && -rm -f path* .merge_* out .git/index && -echo tree2path0 >path0 && -echo tree3path1 >path1 && -echo tree3path2 >path2 && -echo tree3path3 >path3 && -git update-index --add path0 path1 path2 path3 && -t3=$(git write-tree)' - -test_expect_success \ -'checkout one stage 0 to temporary file' ' -rm -f path* .merge_* out .git/index && -git read-tree $t1 && -git checkout-index --temp -- path1 >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = path1 && -p=$(cut "-d " -f1 out) && -test -f $p && -test $(cat $p) = tree1path1' - -test_expect_success \ -'checkout all stage 0 to temporary files' ' -rm -f path* .merge_* out .git/index && -git read-tree $t1 && -git checkout-index -a --temp >out && -test_line_count = 5 out && -for f in path0 path1 path3 path4 asubdir/path5 -do - test $(grep $f out | cut "-d " -f2) = $f && - p=$(grep $f out | cut "-d " -f1) && +test_expect_success 'setup' ' + mkdir asubdir && + echo tree1path0 >path0 && + echo tree1path1 >path1 && + echo tree1path3 >path3 && + echo tree1path4 >path4 && + echo tree1asubdir/path5 >asubdir/path5 && + git update-index --add path0 path1 path3 path4 asubdir/path5 && + t1=$(git write-tree) && + rm -f path* .merge_* actual .git/index && + echo tree2path0 >path0 && + echo tree2path1 >path1 && + echo tree2path2 >path2 && + echo tree2path4 >path4 && + git update-index --add path0 path1 path2 path4 && + t2=$(git write-tree) && + rm -f path* .merge_* actual .git/index && + echo tree2path0 >path0 && + echo tree3path1 >path1 && + echo tree3path2 >path2 && + echo tree3path3 >path3 && + git update-index --add path0 path1 path2 path3 && + t3=$(git write-tree) +' + +test_expect_success 'checkout one stage 0 to temporary file' ' + rm -f path* .merge_* actual .git/index && + git read-tree $t1 && + git checkout-index --temp -- path1 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path1 && + p=$(cut "-d " -f1 actual) && test -f $p && - test $(cat $p) = tree1$f -done' - -test_expect_success \ -'prepare 3-way merge' ' -rm -f path* .merge_* out .git/index && -git read-tree -m $t1 $t2 $t3' - -test_expect_success \ -'checkout one stage 2 to temporary file' ' -rm -f path* .merge_* out && -git checkout-index --stage=2 --temp -- path1 >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = path1 && -p=$(cut "-d " -f1 out) && -test -f $p && -test $(cat $p) = tree2path1' - -test_expect_success \ -'checkout all stage 2 to temporary files' ' -rm -f path* .merge_* out && -git checkout-index --all --stage=2 --temp >out && -test_line_count = 3 out && -for f in path1 path2 path4 -do - test $(grep $f out | cut "-d " -f2) = $f && - p=$(grep $f out | cut "-d " -f1) && + test $(cat $p) = tree1path1 +' + +test_expect_success 'checkout all stage 0 to temporary files' ' + rm -f path* .merge_* actual .git/index && + git read-tree $t1 && + git checkout-index -a --temp >actual && + test_line_count = 5 actual && + for f in path0 path1 path3 path4 asubdir/path5 + do + test $(grep $f actual | cut "-d " -f2) = $f && + p=$(grep $f actual | cut "-d " -f1) && + test -f $p && + test $(cat $p) = tree1$f + done +' + +test_expect_success 'setup 3-way merge' ' + rm -f path* .merge_* actual .git/index && + git read-tree -m $t1 $t2 $t3 +' + +test_expect_success 'checkout one stage 2 to temporary file' ' + rm -f path* .merge_* actual && + git checkout-index --stage=2 --temp -- path1 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path1 && + p=$(cut "-d " -f1 actual) && test -f $p && - test $(cat $p) = tree2$f -done' - -test_expect_success \ -'checkout all stages/one file to nothing' ' -rm -f path* .merge_* out && -git checkout-index --stage=all --temp -- path0 >out && -test_line_count = 0 out' - -test_expect_success \ -'checkout all stages/one file to temporary files' ' -rm -f path* .merge_* out && -git checkout-index --stage=all --temp -- path1 >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = path1 && -cut "-d " -f1 out | (read s1 s2 s3 && -test -f $s1 && -test -f $s2 && -test -f $s3 && -test $(cat $s1) = tree1path1 && -test $(cat $s2) = tree2path1 && -test $(cat $s3) = tree3path1)' - -test_expect_success \ -'checkout some stages/one file to temporary files' ' -rm -f path* .merge_* out && -git checkout-index --stage=all --temp -- path2 >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = path2 && -cut "-d " -f1 out | (read s1 s2 s3 && -test $s1 = . && -test -f $s2 && -test -f $s3 && -test $(cat $s2) = tree2path2 && -test $(cat $s3) = tree3path2)' - -test_expect_success \ -'checkout all stages/all files to temporary files' ' -rm -f path* .merge_* out && -git checkout-index -a --stage=all --temp >out && -test_line_count = 5 out' - -test_expect_success \ -'-- path0: no entry' ' -test x$(grep path0 out | cut "-d " -f2) = x' - -test_expect_success \ -'-- path1: all 3 stages' ' -test $(grep path1 out | cut "-d " -f2) = path1 && -grep path1 out | cut "-d " -f1 | (read s1 s2 s3 && -test -f $s1 && -test -f $s2 && -test -f $s3 && -test $(cat $s1) = tree1path1 && -test $(cat $s2) = tree2path1 && -test $(cat $s3) = tree3path1)' - -test_expect_success \ -'-- path2: no stage 1, have stage 2 and 3' ' -test $(grep path2 out | cut "-d " -f2) = path2 && -grep path2 out | cut "-d " -f1 | (read s1 s2 s3 && -test $s1 = . && -test -f $s2 && -test -f $s3 && -test $(cat $s2) = tree2path2 && -test $(cat $s3) = tree3path2)' - -test_expect_success \ -'-- path3: no stage 2, have stage 1 and 3' ' -test $(grep path3 out | cut "-d " -f2) = path3 && -grep path3 out | cut "-d " -f1 | (read s1 s2 s3 && -test -f $s1 && -test $s2 = . && -test -f $s3 && -test $(cat $s1) = tree1path3 && -test $(cat $s3) = tree3path3)' - -test_expect_success \ -'-- path4: no stage 3, have stage 1 and 3' ' -test $(grep path4 out | cut "-d " -f2) = path4 && -grep path4 out | cut "-d " -f1 | (read s1 s2 s3 && -test -f $s1 && -test -f $s2 && -test $s3 = . && -test $(cat $s1) = tree1path4 && -test $(cat $s2) = tree2path4)' - -test_expect_success \ -'-- asubdir/path5: no stage 2 and 3 have stage 1' ' -test $(grep asubdir/path5 out | cut "-d " -f2) = asubdir/path5 && -grep asubdir/path5 out | cut "-d " -f1 | (read s1 s2 s3 && -test -f $s1 && -test $s2 = . && -test $s3 = . && -test $(cat $s1) = tree1asubdir/path5)' - -test_expect_success \ -'checkout --temp within subdir' ' -(cd asubdir && - git checkout-index -a --stage=all >out && - test_line_count = 1 out && - test $(grep path5 out | cut "-d " -f2) = path5 && - grep path5 out | cut "-d " -f1 | (read s1 s2 s3 && - test -f ../$s1 && - test $s2 = . && - test $s3 = . && - test $(cat ../$s1) = tree1asubdir/path5) -)' - -test_expect_success \ -'checkout --temp symlink' ' -rm -f path* .merge_* out .git/index && -test_ln_s_add b a && -t4=$(git write-tree) && -rm -f .git/index && -git read-tree $t4 && -git checkout-index --temp -a >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = a && -p=$(cut "-d " -f1 out) && -test -f $p && -test $(cat $p) = b' + test $(cat $p) = tree2path1 +' + +test_expect_success 'checkout all stage 2 to temporary files' ' + rm -f path* .merge_* actual && + git checkout-index --all --stage=2 --temp >actual && + test_line_count = 3 actual && + for f in path1 path2 path4 + do + test $(grep $f actual | cut "-d " -f2) = $f && + p=$(grep $f actual | cut "-d " -f1) && + test -f $p && + test $(cat $p) = tree2$f + done +' + +test_expect_success 'checkout all stages/one file to nothing' ' + rm -f path* .merge_* actual && + git checkout-index --stage=all --temp -- path0 >actual && + test_line_count = 0 actual +' + +test_expect_success 'checkout all stages/one file to temporary files' ' + rm -f path* .merge_* actual && + git checkout-index --stage=all --temp -- path1 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path1 && + cut "-d " -f1 actual | (read s1 s2 s3 && + test -f $s1 && + test -f $s2 && + test -f $s3 && + test $(cat $s1) = tree1path1 && + test $(cat $s2) = tree2path1 && + test $(cat $s3) = tree3path1) +' + +test_expect_success 'checkout some stages/one file to temporary files' ' + rm -f path* .merge_* actual && + git checkout-index --stage=all --temp -- path2 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path2 && + cut "-d " -f1 actual | (read s1 s2 s3 && + test $s1 = . && + test -f $s2 && + test -f $s3 && + test $(cat $s2) = tree2path2 && + test $(cat $s3) = tree3path2) +' + +test_expect_success 'checkout all stages/all files to temporary files' ' + rm -f path* .merge_* actual && + git checkout-index -a --stage=all --temp >actual && + test_line_count = 5 actual +' + +test_expect_success '-- path0: no entry' ' + test x$(grep path0 actual | cut "-d " -f2) = x +' + +test_expect_success '-- path1: all 3 stages' ' + test $(grep path1 actual | cut "-d " -f2) = path1 && + grep path1 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f $s1 && + test -f $s2 && + test -f $s3 && + test $(cat $s1) = tree1path1 && + test $(cat $s2) = tree2path1 && + test $(cat $s3) = tree3path1) +' + +test_expect_success '-- path2: no stage 1, have stage 2 and 3' ' + test $(grep path2 actual | cut "-d " -f2) = path2 && + grep path2 actual | cut "-d " -f1 | (read s1 s2 s3 && + test $s1 = . && + test -f $s2 && + test -f $s3 && + test $(cat $s2) = tree2path2 && + test $(cat $s3) = tree3path2) +' + +test_expect_success '-- path3: no stage 2, have stage 1 and 3' ' + test $(grep path3 actual | cut "-d " -f2) = path3 && + grep path3 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f $s1 && + test $s2 = . && + test -f $s3 && + test $(cat $s1) = tree1path3 && + test $(cat $s3) = tree3path3) +' + +test_expect_success '-- path4: no stage 3, have stage 1 and 3' ' + test $(grep path4 actual | cut "-d " -f2) = path4 && + grep path4 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f $s1 && + test -f $s2 && + test $s3 = . && + test $(cat $s1) = tree1path4 && + test $(cat $s2) = tree2path4) +' + +test_expect_success '-- asubdir/path5: no stage 2 and 3 have stage 1' ' + test $(grep asubdir/path5 actual | cut "-d " -f2) = asubdir/path5 && + grep asubdir/path5 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f $s1 && + test $s2 = . && + test $s3 = . && + test $(cat $s1) = tree1asubdir/path5) +' + +test_expect_success 'checkout --temp within subdir' ' + ( + cd asubdir && + git checkout-index -a --stage=all >actual && + test_line_count = 1 actual && + test $(grep path5 actual | cut "-d " -f2) = path5 && + grep path5 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f ../$s1 && + test $s2 = . && + test $s3 = . && + test $(cat ../$s1) = tree1asubdir/path5) + ) +' + +test_expect_success 'checkout --temp symlink' ' + rm -f path* .merge_* actual .git/index && + test_ln_s_add path7 path6 && + git checkout-index --temp -a >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path6 && + p=$(cut "-d " -f1 actual) && + test -f $p && + test $(cat $p) = path7 +' + +test_expect_success 'emit well-formed relative path' ' + rm -f path* .merge_* actual .git/index && + >path0123456789 && + git update-index --add path0123456789 && + ( + cd asubdir && + git checkout-index --temp -- ../path0123456789 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = ../path0123456789 + ) +' test_done diff --git a/t/t2024-checkout-dwim.sh b/t/t2024-checkout-dwim.sh index 6ecb559465..468a000e4b 100755 --- a/t/t2024-checkout-dwim.sh +++ b/t/t2024-checkout-dwim.sh @@ -185,4 +185,22 @@ test_expect_success 'checkout <branch> -- succeeds, even if a file with the same test_branch_upstream spam repo_c spam ' +test_expect_success 'loosely defined local base branch is reported correctly' ' + + git checkout master && + git branch strict && + git branch loose && + git commit --allow-empty -m "a bit more" && + + test_config branch.strict.remote . && + test_config branch.loose.remote . && + test_config branch.strict.merge refs/heads/master && + test_config branch.loose.merge master && + + git checkout strict | sed -e "s/strict/BRANCHNAME/g" >expect && + git checkout loose | sed -e "s/loose/BRANCHNAME/g" >actual && + + test_cmp expect actual +' + test_done diff --git a/t/t2107-update-index-basic.sh b/t/t2107-update-index-basic.sh index 1bafb9098c..dfe02f4818 100755 --- a/t/t2107-update-index-basic.sh +++ b/t/t2107-update-index-basic.sh @@ -65,4 +65,19 @@ test_expect_success '--cacheinfo mode,sha1,path (new syntax)' ' test_cmp expect actual ' +test_expect_success '.lock files cleaned up' ' + mkdir cleanup && + ( + cd cleanup && + mkdir worktree && + git init repo && + cd repo && + git config core.worktree ../../worktree && + # --refresh triggers late setup_work_tree, + # active_cache_changed is zero, rollback_lock_file fails + git update-index --refresh && + ! test -f .git/index.lock + ) +' + test_done diff --git a/t/t3001-ls-files-others-exclude.sh b/t/t3001-ls-files-others-exclude.sh index b2798feef7..3fc484e8c3 100755 --- a/t/t3001-ls-files-others-exclude.sh +++ b/t/t3001-ls-files-others-exclude.sh @@ -294,7 +294,7 @@ one/a.1 one/two/a.1 three/a.1 EOF - git ls-files -o -i --exclude "**/a.1" >actual + git ls-files -o -i --exclude "**/a.1" >actual && test_cmp expect actual ' diff --git a/t/t3010-ls-files-killed-modified.sh b/t/t3010-ls-files-killed-modified.sh index 6d3b828a95..580e158f99 100755 --- a/t/t3010-ls-files-killed-modified.sh +++ b/t/t3010-ls-files-killed-modified.sh @@ -55,14 +55,11 @@ test_expect_success 'git update-index --add to add various paths.' ' : >path9 && date >path10 && git update-index --add -- path0 path?/file? pathx/ju path7 path8 path9 path10 && - for i in 1 2 - do - git init submod$i && - ( - cd submod$i && git commit --allow-empty -m "empty $i" - ) || break - done && - git update-index --add submod[12] + git init submod1 && + git -C submod1 commit --allow-empty -m "empty 1" && + git init submod2 && + git -C submod2 commit --allow-empty -m "empty 2" && + git update-index --add submod[12] && ( cd submod1 && git commit --allow-empty -m "empty 1 (updated)" @@ -99,12 +96,12 @@ test_expect_success 'git ls-files -k to show killed files.' ' ' test_expect_success 'git ls-files -k output (w/o icase)' ' - git ls-files -k >.output + git ls-files -k >.output && test_cmp .expected .output ' test_expect_success 'git ls-files -k output (w/ icase)' ' - git -c core.ignorecase=true ls-files -k >.output + git -c core.ignorecase=true ls-files -k >.output && test_cmp .expected .output ' diff --git a/t/t3031-merge-criscross.sh b/t/t3031-merge-criscross.sh index 7f41607c56..e59b0a32d6 100755 --- a/t/t3031-merge-criscross.sh +++ b/t/t3031-merge-criscross.sh @@ -32,7 +32,7 @@ test_expect_success 'setup repo with criss-cross history' ' do echo $n > data/$n && n=$(($n+1)) || - break + return 1 done && # check them in diff --git a/t/t3060-ls-files-with-tree.sh b/t/t3060-ls-files-with-tree.sh index 61c1f53d1b..44f378ce41 100755 --- a/t/t3060-ls-files-with-tree.sh +++ b/t/t3060-ls-files-with-tree.sh @@ -18,22 +18,16 @@ test_expect_success setup ' echo file >expected && mkdir sub && - bad= && for n in 0 1 2 3 4 5 do for m in 0 1 2 3 4 5 6 7 8 9 do num=00$n$m && >sub/file-$num && - echo file-$num >>expected || { - bad=t - break - } - done && test -z "$bad" || { - bad=t - break - } - done && test -z "$bad" && + echo file-$num >>expected || + return 1 + done + done && git add . && git commit -m "add a bunch of files" && diff --git a/t/t3102-ls-tree-wildcards.sh b/t/t3102-ls-tree-wildcards.sh index c286854485..4d4b02e760 100755 --- a/t/t3102-ls-tree-wildcards.sh +++ b/t/t3102-ls-tree-wildcards.sh @@ -12,11 +12,25 @@ test_expect_success 'setup' ' ' test_expect_success 'ls-tree a[a] matches literally' ' - cat >expected <<EOF && -100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a[a]/three -EOF + cat >expect <<-\EOF && + 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a[a]/three + EOF git ls-tree -r HEAD "a[a]" >actual && - test_cmp expected actual + test_cmp expect actual +' + +test_expect_success 'ls-tree outside prefix' ' + cat >expect <<-\EOF && + 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 ../a[a]/three + EOF + ( cd aa && git ls-tree -r HEAD "../a[a]"; ) >actual && + test_cmp expect actual +' + +test_expect_failure 'ls-tree does not yet support negated pathspec' ' + git ls-files ":(exclude)a" "a*" >expect && + git ls-tree --name-only -r HEAD ":(exclude)a" "a*" >actual && + test_cmp expect actual ' test_done diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 432921b6b8..ddea49808d 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -97,6 +97,20 @@ test_expect_success 'git branch -m o/o o should fail when o/p exists' ' test_must_fail git branch -m o/o o ' +test_expect_success 'git branch -m o/q o/p should fail when o/p exists' ' + git branch o/q && + test_must_fail git branch -m o/q o/p +' + +test_expect_success 'git branch -M o/q o/p should work when o/p exists' ' + git branch -M o/q o/p +' + +test_expect_success 'git branch -m -f o/q o/p should work when o/p exists' ' + git branch o/q && + git branch -m -f o/q o/p +' + test_expect_success 'git branch -m q r/q should fail when r exists' ' git branch q && git branch r && diff --git a/t/t3202-show-branch-octopus.sh b/t/t3202-show-branch-octopus.sh index 0a5d5e669f..6adf47869c 100755 --- a/t/t3202-show-branch-octopus.sh +++ b/t/t3202-show-branch-octopus.sh @@ -19,7 +19,7 @@ test_expect_success 'setup' ' > file$i && git add file$i && test_tick && - git commit -m branch$i || break + git commit -m branch$i || return 1 done ' diff --git a/t/t3203-branch-output.sh b/t/t3203-branch-output.sh index ba4f98e800..f51d0f3cad 100755 --- a/t/t3203-branch-output.sh +++ b/t/t3203-branch-output.sh @@ -96,7 +96,7 @@ test_expect_success 'git branch -v pattern does not show branch summaries' ' test_expect_success 'git branch shows detached HEAD properly' ' cat >expect <<EOF && -* (detached from $(git rev-parse --short HEAD^0)) +* (HEAD detached at $(git rev-parse --short HEAD^0)) branch-one branch-two master @@ -106,4 +106,41 @@ EOF test_i18ncmp expect actual ' +test_expect_success 'git branch shows detached HEAD properly after moving' ' + cat >expect <<EOF && +* (HEAD detached from $(git rev-parse --short HEAD)) + branch-one + branch-two + master +EOF + git reset --hard HEAD^1 && + git branch >actual && + test_i18ncmp expect actual +' + +test_expect_success 'git branch shows detached HEAD properly from tag' ' + cat >expect <<EOF && +* (HEAD detached at fromtag) + branch-one + branch-two + master +EOF + git tag fromtag master && + git checkout fromtag && + git branch >actual && + test_i18ncmp expect actual +' + +test_expect_success 'git branch shows detached HEAD properly after moving from tag' ' + cat >expect <<EOF && +* (HEAD detached from fromtag) + branch-one + branch-two + master +EOF + git reset --hard HEAD^1 && + git branch >actual && + test_i18ncmp expect actual +' + test_done diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh index cfd67ff3df..8cffd35fb0 100755 --- a/t/t3301-notes.sh +++ b/t/t3301-notes.sh @@ -7,28 +7,22 @@ test_description='Test commit notes' . ./test-lib.sh -cat > fake_editor.sh << \EOF -#!/bin/sh -echo "$MSG" > "$1" -echo "$MSG" >& 2 +write_script fake_editor <<\EOF +echo "$MSG" >"$1" +echo "$MSG" >&2 EOF -chmod a+x fake_editor.sh -GIT_EDITOR=./fake_editor.sh +GIT_EDITOR=./fake_editor export GIT_EDITOR +indent=" " + test_expect_success 'cannot annotate non-existing HEAD' ' test_must_fail env MSG=3 git notes add ' -test_expect_success setup ' - : > a1 && - git add a1 && - test_tick && - git commit -m 1st && - : > a2 && - git add a2 && - test_tick && - git commit -m 2nd +test_expect_success 'setup' ' + test_commit 1st && + test_commit 2nd ' test_expect_success 'need valid notes ref' ' @@ -50,206 +44,186 @@ test_expect_success 'handle empty notes gracefully' ' ' test_expect_success 'show non-existent notes entry with %N' ' - for l in A B - do - echo "$l" - done >expect && - git show -s --format='A%n%NB' >output && - test_cmp expect output + test_write_lines A B >expect && + git show -s --format="A%n%NB" >actual && + test_cmp expect actual ' test_expect_success 'create notes' ' - git config core.notesRef refs/notes/commits && MSG=b4 git notes add && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b4 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b4" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'show notes entry with %N' ' - for l in A b4 B - do - echo "$l" - done >expect && - git show -s --format='A%n%NB' >output && - test_cmp expect output + test_write_lines A b4 B >expect && + git show -s --format="A%n%NB" >actual && + test_cmp expect actual ' -cat >expect <<EOF -d423f8c refs/notes/commits@{0}: notes: Notes added by 'git notes add' -EOF - test_expect_success 'create reflog entry' ' - git reflog show refs/notes/commits >output && - test_cmp expect output + cat <<-EOF >expect && + a1d8fa6 refs/notes/commits@{0}: notes: Notes added by '\''git notes add'\'' + EOF + git reflog show refs/notes/commits >actual && + test_cmp expect actual ' test_expect_success 'edit existing notes' ' MSG=b3 git notes edit && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b3 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b3" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'cannot "git notes add -m" where notes already exists' ' test_must_fail git notes add -m "b2" && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b3 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b3" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'can overwrite existing note with "git notes add -f -m"' ' git notes add -f -m "b1" && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b1 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b1" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'add w/no options on existing note morphs into edit' ' MSG=b2 git notes add && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b2 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b2" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'can overwrite existing note with "git notes add -f"' ' MSG=b1 git notes add -f && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b1 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b1" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' -cat > expect << EOF -commit 268048bfb8a1fb38e703baceb8ab235421bf80c5 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:14:13 2005 -0700 - - 2nd +test_expect_success 'show notes' ' + cat >expect <<-EOF && + commit 7a4ca6ee52a974a66cbaa78e33214535dff1d691 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:14:13 2005 -0700 -Notes: - b1 -EOF + ${indent}2nd -test_expect_success 'show notes' ' + Notes: + ${indent}b1 + EOF ! (git cat-file commit HEAD | grep b1) && - git log -1 > output && - test_cmp expect output -' - -test_expect_success 'create multi-line notes (setup)' ' - : > a3 && - git add a3 && - test_tick && - git commit -m 3rd && - MSG="b3 -c3c3c3c3 -d3d3d3" git notes add + git log -1 >actual && + test_cmp expect actual ' -cat > expect-multiline << EOF -commit 1584215f1d29c65e99c6c6848626553fdd07fd75 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:15:13 2005 -0700 - - 3rd +test_expect_success 'show multi-line notes' ' + test_commit 3rd && + MSG="b3${LF}c3c3c3c3${LF}d3d3d3" git notes add && + cat >expect-multiline <<-EOF && + commit d07d62e5208f22eb5695e7eb47667dc8b9860290 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 -Notes: - b3 - c3c3c3c3 - d3d3d3 -EOF + ${indent}3rd -printf "\n" >> expect-multiline -cat expect >> expect-multiline + Notes: + ${indent}b3 + ${indent}c3c3c3c3 + ${indent}d3d3d3 -test_expect_success 'show multi-line notes' ' - git log -2 > output && - test_cmp expect-multiline output -' -test_expect_success 'create -F notes (setup)' ' - : > a4 && - git add a4 && - test_tick && - git commit -m 4th && - echo "xyzzy" > note5 && - git notes add -F note5 + EOF + cat expect >>expect-multiline && + git log -2 >actual && + test_cmp expect-multiline actual ' -cat > expect-F << EOF -commit 15023535574ded8b1a89052b32673f84cf9582b8 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:16:13 2005 -0700 +test_expect_success 'show -F notes' ' + test_commit 4th && + echo "xyzzy" >note5 && + git notes add -F note5 && + cat >expect-F <<-EOF && + commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 - 4th + ${indent}4th -Notes: - xyzzy -EOF + Notes: + ${indent}xyzzy -printf "\n" >> expect-F -cat expect-multiline >> expect-F - -test_expect_success 'show -F notes' ' - git log -3 > output && - test_cmp expect-F output + EOF + cat expect-multiline >>expect-F && + git log -3 >actual && + test_cmp expect-F actual ' test_expect_success 'Re-adding -F notes without -f fails' ' - echo "zyxxy" > note5 && + echo "zyxxy" >note5 && test_must_fail git notes add -F note5 && - git log -3 > output && - test_cmp expect-F output + git log -3 >actual && + test_cmp expect-F actual ' -cat >expect << EOF -commit 15023535574ded8b1a89052b32673f84cf9582b8 -tree e070e3af51011e47b183c33adf9736736a525709 -parent 1584215f1d29c65e99c6c6848626553fdd07fd75 -author A U Thor <author@example.com> 1112912173 -0700 -committer C O Mitter <committer@example.com> 1112912173 -0700 - - 4th -EOF test_expect_success 'git log --pretty=raw does not show notes' ' - git log -1 --pretty=raw >output && - test_cmp expect output + cat >expect <<-EOF && + commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + tree 05ac65288c4c4b3b709a020ae94b2ece2f2201ae + parent d07d62e5208f22eb5695e7eb47667dc8b9860290 + author A U Thor <author@example.com> 1112912173 -0700 + committer C O Mitter <committer@example.com> 1112912173 -0700 + + ${indent}4th + EOF + git log -1 --pretty=raw >actual && + test_cmp expect actual ' -cat >>expect <<EOF - -Notes: - xyzzy -EOF test_expect_success 'git log --show-notes' ' - git log -1 --pretty=raw --show-notes >output && - test_cmp expect output + cat >>expect <<-EOF && + + Notes: + ${indent}xyzzy + EOF + git log -1 --pretty=raw --show-notes >actual && + test_cmp expect actual ' test_expect_success 'git log --no-notes' ' - git log -1 --no-notes >output && - ! grep xyzzy output + git log -1 --no-notes >actual && + ! grep xyzzy actual ' test_expect_success 'git format-patch does not show notes' ' - git format-patch -1 --stdout >output && - ! grep xyzzy output + git format-patch -1 --stdout >actual && + ! grep xyzzy actual ' test_expect_success 'git format-patch --show-notes does show notes' ' - git format-patch --show-notes -1 --stdout >output && - grep xyzzy output + git format-patch --show-notes -1 --stdout >actual && + grep xyzzy actual ' for pretty in \ @@ -261,8 +235,8 @@ do ?*) p="$pretty" not=" not" negate="!" ;; esac test_expect_success "git show $pretty does$not show notes" ' - git show $p >output && - eval "$negate grep xyzzy output" + git show $p >actual && + eval "$negate grep xyzzy actual" ' done @@ -271,161 +245,131 @@ test_expect_success 'setup alternate notes ref' ' ' test_expect_success 'git log --notes shows default notes' ' - git log -1 --notes >output && - grep xyzzy output && - ! grep alternate output + git log -1 --notes >actual && + grep xyzzy actual && + ! grep alternate actual ' test_expect_success 'git log --notes=X shows only X' ' - git log -1 --notes=alternate >output && - ! grep xyzzy output && - grep alternate output + git log -1 --notes=alternate >actual && + ! grep xyzzy actual && + grep alternate actual ' test_expect_success 'git log --notes --notes=X shows both' ' - git log -1 --notes --notes=alternate >output && - grep xyzzy output && - grep alternate output + git log -1 --notes --notes=alternate >actual && + grep xyzzy actual && + grep alternate actual ' test_expect_success 'git log --no-notes resets default state' ' git log -1 --notes --notes=alternate \ --no-notes --notes=alternate \ - >output && - ! grep xyzzy output && - grep alternate output + >actual && + ! grep xyzzy actual && + grep alternate actual ' test_expect_success 'git log --no-notes resets ref list' ' git log -1 --notes --notes=alternate \ --no-notes --notes \ - >output && - grep xyzzy output && - ! grep alternate output -' - -test_expect_success 'create -m notes (setup)' ' - : > a5 && - git add a5 && - test_tick && - git commit -m 5th && - git notes add -m spam -m "foo -bar -baz" -' - -whitespace=" " -cat > expect-m << EOF -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 - - 5th - -Notes: - spam -$whitespace - foo - bar - baz -EOF - -printf "\n" >> expect-m -cat expect-F >> expect-m - -test_expect_success 'show -m notes' ' - git log -4 > output && - test_cmp expect-m output + >actual && + grep xyzzy actual && + ! grep alternate actual ' -test_expect_success 'remove note with add -f -F /dev/null (setup)' ' - git notes add -f -F /dev/null -' - -cat > expect-rm-F << EOF -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 - - 5th -EOF - -printf "\n" >> expect-rm-F -cat expect-F >> expect-rm-F - -test_expect_success 'verify note removal with -F /dev/null' ' - git log -4 > output && - test_cmp expect-rm-F output && +test_expect_success 'show -m notes' ' + test_commit 5th && + git notes add -m spam -m "foo${LF}bar${LF}baz" && + cat >expect-m <<-EOF && + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 + + ${indent}5th + + Notes: + ${indent}spam + ${indent} + ${indent}foo + ${indent}bar + ${indent}baz + + EOF + cat expect-F >>expect-m && + git log -4 >actual && + test_cmp expect-m actual +' + +test_expect_success 'remove note with add -f -F /dev/null' ' + git notes add -f -F /dev/null && + cat >expect-rm-F <<-EOF && + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 + + ${indent}5th + + EOF + cat expect-F >>expect-rm-F && + git log -4 >actual && + test_cmp expect-rm-F actual && test_must_fail git notes show ' -test_expect_success 'do not create empty note with -m "" (setup)' ' - git notes add -m "" -' - -test_expect_success 'verify non-creation of note with -m ""' ' - git log -4 > output && - test_cmp expect-rm-F output && +test_expect_success 'do not create empty note with -m ""' ' + git notes add -m "" && + git log -4 >actual && + test_cmp expect-rm-F actual && test_must_fail git notes show ' -cat > expect-combine_m_and_F << EOF -foo - -xyzzy +test_expect_success 'create note with combination of -m and -F' ' + cat >expect-combine_m_and_F <<-EOF && + foo -bar + xyzzy -zyxxy + bar -baz -EOF + zyxxy -test_expect_success 'create note with combination of -m and -F' ' - echo "xyzzy" > note_a && - echo "zyxxy" > note_b && + baz + EOF + echo "xyzzy" >note_a && + echo "zyxxy" >note_b && git notes add -m "foo" -F note_a -m "bar" -F note_b -m "baz" && - git notes show > output && - test_cmp expect-combine_m_and_F output + git notes show >actual && + test_cmp expect-combine_m_and_F actual ' -test_expect_success 'remove note with "git notes remove" (setup)' ' +test_expect_success 'remove note with "git notes remove"' ' git notes remove HEAD^ && - git notes remove -' - -cat > expect-rm-remove << EOF -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 + git notes remove && + cat >expect-rm-remove <<-EOF && + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 - 5th + ${indent}5th -commit 15023535574ded8b1a89052b32673f84cf9582b8 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:16:13 2005 -0700 + commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 - 4th -EOF - -printf "\n" >> expect-rm-remove -cat expect-multiline >> expect-rm-remove + ${indent}4th -test_expect_success 'verify note removal with "git notes remove"' ' - git log -4 > output && - test_cmp expect-rm-remove output && + EOF + cat expect-multiline >>expect-rm-remove && + git log -4 >actual && + test_cmp expect-rm-remove actual && test_must_fail git notes show HEAD^ ' -cat > expect << EOF -c18dc024e14f08d18d14eea0d747ff692d66d6a3 1584215f1d29c65e99c6c6848626553fdd07fd75 -c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 268048bfb8a1fb38e703baceb8ab235421bf80c5 -EOF - test_expect_success 'removing non-existing note should not create new commit' ' - git rev-parse --verify refs/notes/commits > before_commit && + git rev-parse --verify refs/notes/commits >before_commit && test_must_fail git notes remove HEAD^ && - git rev-parse --verify refs/notes/commits > after_commit && + git rev-parse --verify refs/notes/commits >after_commit && test_cmp before_commit after_commit ' @@ -505,70 +449,68 @@ test_expect_success 'removing with --stdin --ignore-missing' ' ' test_expect_success 'list notes with "git notes list"' ' - git notes list > output && - test_cmp expect output + cat >expect <<-EOF && + c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 7a4ca6ee52a974a66cbaa78e33214535dff1d691 + c18dc024e14f08d18d14eea0d747ff692d66d6a3 d07d62e5208f22eb5695e7eb47667dc8b9860290 + EOF + git notes list >actual && + test_cmp expect actual ' test_expect_success 'list notes with "git notes"' ' - git notes > output && - test_cmp expect output + git notes >actual && + test_cmp expect actual ' -cat > expect << EOF -c18dc024e14f08d18d14eea0d747ff692d66d6a3 -EOF - test_expect_success 'list specific note with "git notes list <object>"' ' - git notes list HEAD^^ > output && - test_cmp expect output + cat >expect <<-EOF && + c18dc024e14f08d18d14eea0d747ff692d66d6a3 + EOF + git notes list HEAD^^ >actual && + test_cmp expect actual ' -cat > expect << EOF -EOF - test_expect_success 'listing non-existing notes fails' ' - test_must_fail git notes list HEAD > output && - test_cmp expect output + cat >expect <<-EOF && + EOF + test_must_fail git notes list HEAD >actual && + test_cmp expect actual ' -cat > expect << EOF -Initial set of notes - -More notes appended with git notes append -EOF - test_expect_success 'append to existing note with "git notes append"' ' + cat >expect <<-EOF && + Initial set of notes + + More notes appended with git notes append + EOF git notes add -m "Initial set of notes" && git notes append -m "More notes appended with git notes append" && - git notes show > output && - test_cmp expect output + git notes show >actual && + test_cmp expect actual ' -cat > expect_list << EOF -c18dc024e14f08d18d14eea0d747ff692d66d6a3 1584215f1d29c65e99c6c6848626553fdd07fd75 -c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 268048bfb8a1fb38e703baceb8ab235421bf80c5 -4b6ad22357cc8a1296720574b8d2fbc22fab0671 bd1753200303d0a0344be813e504253b3d98e74d -EOF - test_expect_success '"git notes list" does not expand to "git notes list HEAD"' ' - git notes list > output && - test_cmp expect_list output + cat >expect_list <<-EOF && + c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 7a4ca6ee52a974a66cbaa78e33214535dff1d691 + 4b6ad22357cc8a1296720574b8d2fbc22fab0671 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + c18dc024e14f08d18d14eea0d747ff692d66d6a3 d07d62e5208f22eb5695e7eb47667dc8b9860290 + EOF + git notes list >actual && + test_cmp expect_list actual ' test_expect_success 'appending empty string does not change existing note' ' git notes append -m "" && - git notes show > output && - test_cmp expect output + git notes show >actual && + test_cmp expect actual ' test_expect_success 'git notes append == add when there is no existing note' ' git notes remove HEAD && test_must_fail git notes list HEAD && - git notes append -m "Initial set of notes - -More notes appended with git notes append" && - git notes show > output && - test_cmp expect output + git notes append -m "Initial set of notes${LF}${LF}More notes appended with git notes append" && + git notes show >actual && + test_cmp expect actual ' test_expect_success 'appending empty string to non-existing note does not create note' ' @@ -579,229 +521,208 @@ test_expect_success 'appending empty string to non-existing note does not create ' test_expect_success 'create other note on a different notes ref (setup)' ' - : > a6 && - git add a6 && - test_tick && - git commit -m 6th && - GIT_NOTES_REF="refs/notes/other" git notes add -m "other note" -' + test_commit 6th && + GIT_NOTES_REF="refs/notes/other" git notes add -m "other note" && + cat >expect-not-other <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -cat > expect-other << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th - -Notes (other): - other note -EOF + ${indent}6th + EOF + cp expect-not-other expect-other && + cat >>expect-other <<-EOF -cat > expect-not-other << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th -EOF + Notes (other): + ${indent}other note + EOF +' test_expect_success 'Do not show note on other ref by default' ' - git log -1 > output && - test_cmp expect-not-other output + git log -1 >actual && + test_cmp expect-not-other actual ' test_expect_success 'Do show note when ref is given in GIT_NOTES_REF' ' - GIT_NOTES_REF="refs/notes/other" git log -1 > output && - test_cmp expect-other output + GIT_NOTES_REF="refs/notes/other" git log -1 >actual && + test_cmp expect-other actual ' test_expect_success 'Do show note when ref is given in core.notesRef config' ' - git config core.notesRef "refs/notes/other" && - git log -1 > output && - test_cmp expect-other output + test_config core.notesRef "refs/notes/other" && + git log -1 >actual && + test_cmp expect-other actual ' test_expect_success 'Do not show note when core.notesRef is overridden' ' - GIT_NOTES_REF="refs/notes/wrong" git log -1 > output && - test_cmp expect-not-other output + test_config core.notesRef "refs/notes/other" && + GIT_NOTES_REF="refs/notes/wrong" git log -1 >actual && + test_cmp expect-not-other actual ' -cat > expect-both << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th +test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' ' + cat >expect-both <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -Notes: - order test + ${indent}6th -Notes (other): - other note + Notes: + ${indent}order test -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 + Notes (other): + ${indent}other note - 5th + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 -Notes: - replacement for deleted note -EOF + ${indent}5th -test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' ' + Notes: + ${indent}replacement for deleted note + EOF GIT_NOTES_REF=refs/notes/commits git notes add \ -m"replacement for deleted note" HEAD^ && GIT_NOTES_REF=refs/notes/commits git notes add -m"order test" && - git config --unset core.notesRef && - git config notes.displayRef "refs/notes/*" && - git log -2 > output && - test_cmp expect-both output + test_unconfig core.notesRef && + test_config notes.displayRef "refs/notes/*" && + git log -2 >actual && + test_cmp expect-both actual ' test_expect_success 'core.notesRef is implicitly in notes.displayRef' ' - git config core.notesRef refs/notes/commits && - git config notes.displayRef refs/notes/other && - git log -2 > output && - test_cmp expect-both output + test_config core.notesRef refs/notes/commits && + test_config notes.displayRef refs/notes/other && + git log -2 >actual && + test_cmp expect-both actual ' test_expect_success 'notes.displayRef can be given more than once' ' - git config --unset core.notesRef && - git config notes.displayRef refs/notes/commits && + test_unconfig core.notesRef && + test_config notes.displayRef refs/notes/commits && git config --add notes.displayRef refs/notes/other && - git log -2 > output && - test_cmp expect-both output + git log -2 >actual && + test_cmp expect-both actual ' -cat > expect-both-reversed << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th +test_expect_success 'notes.displayRef respects order' ' + cat >expect-both-reversed <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -Notes (other): - other note + ${indent}6th -Notes: - order test -EOF + Notes (other): + ${indent}other note -test_expect_success 'notes.displayRef respects order' ' - git config core.notesRef refs/notes/other && - git config --unset-all notes.displayRef && - git config notes.displayRef refs/notes/commits && - git log -1 > output && - test_cmp expect-both-reversed output + Notes: + ${indent}order test + EOF + test_config core.notesRef refs/notes/other && + test_config notes.displayRef refs/notes/commits && + git log -1 >actual && + test_cmp expect-both-reversed actual ' test_expect_success 'GIT_NOTES_DISPLAY_REF works' ' - git config --unset-all core.notesRef && - git config --unset-all notes.displayRef && GIT_NOTES_DISPLAY_REF=refs/notes/commits:refs/notes/other \ - git log -2 > output && - test_cmp expect-both output + git log -2 >actual && + test_cmp expect-both actual ' -cat > expect-none << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th +test_expect_success 'GIT_NOTES_DISPLAY_REF overrides config' ' + cat >expect-none <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 + ${indent}6th - 5th -EOF + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 -test_expect_success 'GIT_NOTES_DISPLAY_REF overrides config' ' - git config notes.displayRef "refs/notes/*" && - GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log -2 > output && - test_cmp expect-none output + ${indent}5th + EOF + test_config notes.displayRef "refs/notes/*" && + GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log -2 >actual && + test_cmp expect-none actual ' test_expect_success '--show-notes=* adds to GIT_NOTES_DISPLAY_REF' ' - GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log --show-notes=* -2 > output && - test_cmp expect-both output + GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log --show-notes=* -2 >actual && + test_cmp expect-both actual ' -cat > expect-commits << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th +test_expect_success '--no-standard-notes' ' + cat >expect-commits <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -Notes: - order test -EOF + ${indent}6th -test_expect_success '--no-standard-notes' ' - git log --no-standard-notes --show-notes=commits -1 > output && - test_cmp expect-commits output + Notes: + ${indent}order test + EOF + git log --no-standard-notes --show-notes=commits -1 >actual && + test_cmp expect-commits actual ' test_expect_success '--standard-notes' ' + test_config notes.displayRef "refs/notes/*" && git log --no-standard-notes --show-notes=commits \ - --standard-notes -2 > output && - test_cmp expect-both output + --standard-notes -2 >actual && + test_cmp expect-both actual ' test_expect_success '--show-notes=ref accumulates' ' git log --show-notes=other --show-notes=commits \ - --no-standard-notes -1 > output && - test_cmp expect-both-reversed output + --no-standard-notes -1 >actual && + test_cmp expect-both-reversed actual ' test_expect_success 'Allow notes on non-commits (trees, blobs, tags)' ' - git config core.notesRef refs/notes/other && - echo "Note on a tree" > expect && + test_config core.notesRef refs/notes/other && + echo "Note on a tree" >expect && git notes add -m "Note on a tree" HEAD: && - git notes show HEAD: > actual && + git notes show HEAD: >actual && test_cmp expect actual && - echo "Note on a blob" > expect && + echo "Note on a blob" >expect && filename=$(git ls-tree --name-only HEAD | head -n1) && git notes add -m "Note on a blob" HEAD:$filename && - git notes show HEAD:$filename > actual && + git notes show HEAD:$filename >actual && test_cmp expect actual && - echo "Note on a tag" > expect && + echo "Note on a tag" >expect && git tag -a -m "This is an annotated tag" foobar HEAD^ && git notes add -m "Note on a tag" foobar && - git notes show foobar > actual && + git notes show foobar >actual && test_cmp expect actual ' -cat > expect << EOF -commit 2ede89468182a62d0bde2583c736089bcf7d7e92 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:19:13 2005 -0700 - - 7th +test_expect_success 'create note from other note with "git notes add -C"' ' + cat >expect <<-EOF && + commit fb01e0ca8c33b6cc0c6451dde747f97df567cb5c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:19:13 2005 -0700 -Notes (other): - other note -EOF + ${indent}7th -test_expect_success 'create note from other note with "git notes add -C"' ' - : > a7 && - git add a7 && - test_tick && - git commit -m 7th && + Notes: + ${indent}order test + EOF + test_commit 7th && git notes add -C $(git notes list HEAD^) && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD^)" ' test_expect_success 'create note from non-existing note with "git notes add -C" fails' ' - : > a8 && - git add a8 && - test_tick && - git commit -m 8th && + test_commit 8th && test_must_fail git notes add -C deadbeef && test_must_fail git notes list HEAD ' @@ -814,405 +735,386 @@ test_expect_success 'create note from non-blob with "git notes add -C" fails' ' test_must_fail git notes list HEAD ' -cat > expect << EOF -commit 80d796defacd5db327b7a4e50099663902fbdc5c -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:20:13 2005 -0700 - - 8th +test_expect_success 'create note from blob with "git notes add -C" reuses blob id' ' + cat >expect <<-EOF && + commit 9a4c31c7f722b5d517e92c64e932dd751e1413bf + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:20:13 2005 -0700 -Notes (other): - This is a blob object -EOF + ${indent}8th -test_expect_success 'create note from blob with "git notes add -C" reuses blob id' ' + Notes: + ${indent}This is a blob object + EOF blob=$(echo "This is a blob object" | git hash-object -w --stdin) && git notes add -C $blob && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$blob" ' -cat > expect << EOF -commit 016e982bad97eacdbda0fcbd7ce5b0ba87c81f1b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:21:13 2005 -0700 - - 9th +test_expect_success 'create note from other note with "git notes add -c"' ' + cat >expect <<-EOF && + commit 2e0db4bc649e174d667a1cde19e725cf897a5bd2 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:21:13 2005 -0700 -Notes (other): - yet another note -EOF + ${indent}9th -test_expect_success 'create note from other note with "git notes add -c"' ' - : > a9 && - git add a9 && - test_tick && - git commit -m 9th && + Notes: + ${indent}yet another note + EOF + test_commit 9th && MSG="yet another note" git notes add -c $(git notes list HEAD^^) && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual ' test_expect_success 'create note from non-existing note with "git notes add -c" fails' ' - : > a10 && - git add a10 && - test_tick && - git commit -m 10th && + test_commit 10th && test_must_fail env MSG="yet another note" git notes add -c deadbeef && test_must_fail git notes list HEAD ' -cat > expect << EOF -commit 016e982bad97eacdbda0fcbd7ce5b0ba87c81f1b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:21:13 2005 -0700 - - 9th - -Notes (other): - yet another note -$whitespace - yet another note -EOF - test_expect_success 'append to note from other note with "git notes append -C"' ' + cat >expect <<-EOF && + commit 2e0db4bc649e174d667a1cde19e725cf897a5bd2 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:21:13 2005 -0700 + + ${indent}9th + + Notes: + ${indent}yet another note + ${indent} + ${indent}yet another note + EOF git notes append -C $(git notes list HEAD^) HEAD^ && - git log -1 HEAD^ > actual && + git log -1 HEAD^ >actual && test_cmp expect actual ' -cat > expect << EOF -commit ffed603236bfa3891c49644257a83598afe8ae5a -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:22:13 2005 -0700 +test_expect_success 'create note from other note with "git notes append -c"' ' + cat >expect <<-EOF && + commit 7c3b87ab368f81e11b1ea87b2ab99a71ccd25406 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:22:13 2005 -0700 - 10th + ${indent}10th -Notes (other): - other note -EOF - -test_expect_success 'create note from other note with "git notes append -c"' ' + Notes: + ${indent}other note + EOF MSG="other note" git notes append -c $(git notes list HEAD^) && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual ' -cat > expect << EOF -commit ffed603236bfa3891c49644257a83598afe8ae5a -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:22:13 2005 -0700 - - 10th - -Notes (other): - other note -$whitespace - yet another note -EOF - test_expect_success 'append to note from other note with "git notes append -c"' ' + cat >expect <<-EOF && + commit 7c3b87ab368f81e11b1ea87b2ab99a71ccd25406 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:22:13 2005 -0700 + + ${indent}10th + + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF MSG="yet another note" git notes append -c $(git notes list HEAD) && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual ' -cat > expect << EOF -commit 6352c5e33dbcab725fe0579be16aa2ba8eb369be -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:23:13 2005 -0700 - - 11th - -Notes (other): - other note -$whitespace - yet another note -EOF - test_expect_success 'copy note with "git notes copy"' ' - : > a11 && - git add a11 && - test_tick && - git commit -m 11th && + cat >expect <<-EOF && + commit a446fff8777efdc6eb8f4b7c8a5ff699484df0d5 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:23:13 2005 -0700 + + ${indent}11th + + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF + test_commit 11th && git notes copy HEAD^ HEAD && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD^)" ' test_expect_success 'prevent overwrite with "git notes copy"' ' test_must_fail git notes copy HEAD~2 HEAD && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD^)" ' -cat > expect << EOF -commit 6352c5e33dbcab725fe0579be16aa2ba8eb369be -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:23:13 2005 -0700 - - 11th - -Notes (other): - yet another note -$whitespace - yet another note -EOF - test_expect_success 'allow overwrite with "git notes copy -f"' ' + cat >expect <<-EOF && + commit a446fff8777efdc6eb8f4b7c8a5ff699484df0d5 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:23:13 2005 -0700 + + ${indent}11th + + Notes: + ${indent}yet another note + ${indent} + ${indent}yet another note + EOF git notes copy -f HEAD~2 HEAD && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" ' test_expect_success 'cannot copy note from object without notes' ' - : > a12 && - git add a12 && - test_tick && - git commit -m 12th && - : > a13 && - git add a13 && - test_tick && - git commit -m 13th && + test_commit 12th && + test_commit 13th && test_must_fail git notes copy HEAD^ HEAD ' -cat > expect << EOF -commit e5d4fb5698d564ab8c73551538ecaf2b0c666185 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:25:13 2005 -0700 - - 13th +test_expect_success 'git notes copy --stdin' ' + cat >expect <<-EOF && + commit e871aa61182b1d95d0a6fb75445d891722863b6b + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:25:13 2005 -0700 -Notes (other): - yet another note -$whitespace - yet another note + ${indent}13th -commit 7038787dfe22a14c3867ce816dbba39845359719 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:24:13 2005 -0700 + Notes: + ${indent}yet another note + ${indent} + ${indent}yet another note - 12th + commit 65e263ded02ae4e8839bc151095113737579dc12 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:24:13 2005 -0700 -Notes (other): - other note -$whitespace - yet another note -EOF + ${indent}12th -test_expect_success 'git notes copy --stdin' ' + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \ echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | git notes copy --stdin && - git log -2 > output && - test_cmp expect output && + git log -2 >actual && + test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" && test "$(git notes list HEAD^)" = "$(git notes list HEAD~3)" ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th +test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 -commit be28d8b4d9951ad940d229ee3b0b9ee3b1ec273d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:26:13 2005 -0700 + ${indent}15th - 14th -EOF + commit 07c85d77059393ed0154b8c96906547a59dfcddd + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:26:13 2005 -0700 -test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' + ${indent}14th + EOF test_commit 14th && test_commit 15th && (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \ echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | git notes copy --for-rewrite=foo && - git log -2 > output && - test_cmp expect output + git log -2 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th - -Notes (other): - yet another note -$whitespace - yet another note - -commit be28d8b4d9951ad940d229ee3b0b9ee3b1ec273d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:26:13 2005 -0700 - - 14th - -Notes (other): - other note -$whitespace - yet another note -EOF - test_expect_success 'git notes copy --for-rewrite (enabled)' ' - git config notes.rewriteMode overwrite && - git config notes.rewriteRef "refs/notes/*" && + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 + + ${indent}15th + + Notes: + ${indent}yet another note + ${indent} + ${indent}yet another note + + commit 07c85d77059393ed0154b8c96906547a59dfcddd + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:26:13 2005 -0700 + + ${indent}14th + + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF + test_config notes.rewriteMode overwrite && + test_config notes.rewriteRef "refs/notes/*" && (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \ echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | git notes copy --for-rewrite=foo && - git log -2 > output && - test_cmp expect output + git log -2 >actual && + test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (disabled)' ' - git config notes.rewrite.bar false && + test_config notes.rewrite.bar false && echo $(git rev-parse HEAD~3) $(git rev-parse HEAD) | git notes copy --for-rewrite=bar && - git log -2 > output && - test_cmp expect output + git log -2 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th +test_expect_success 'git notes copy --for-rewrite (overwrite)' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 -Notes (other): - a fresh note -EOF + ${indent}15th -test_expect_success 'git notes copy --for-rewrite (overwrite)' ' + Notes: + ${indent}a fresh note + EOF git notes add -f -m"a fresh note" HEAD^ && + test_config notes.rewriteMode overwrite && + test_config notes.rewriteRef "refs/notes/*" && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (ignore)' ' - git config notes.rewriteMode ignore && + test_config notes.rewriteMode ignore && + test_config notes.rewriteRef "refs/notes/*" && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th - -Notes (other): - a fresh note -$whitespace - another fresh note -EOF - test_expect_success 'git notes copy --for-rewrite (append)' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 + + ${indent}15th + + Notes: + ${indent}a fresh note + ${indent} + ${indent}another fresh note + EOF git notes add -f -m"another fresh note" HEAD^ && - git config notes.rewriteMode concatenate && + test_config notes.rewriteMode concatenate && + test_config notes.rewriteRef "refs/notes/*" && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th - -Notes (other): - a fresh note -$whitespace - another fresh note -$whitespace - append 1 -$whitespace - append 2 -EOF - test_expect_success 'git notes copy --for-rewrite (append two to one)' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 + + ${indent}15th + + Notes: + ${indent}a fresh note + ${indent} + ${indent}another fresh note + ${indent} + ${indent}append 1 + ${indent} + ${indent}append 2 + EOF git notes add -f -m"append 1" HEAD^ && git notes add -f -m"append 2" HEAD^^ && + test_config notes.rewriteMode concatenate && + test_config notes.rewriteRef "refs/notes/*" && (echo $(git rev-parse HEAD^) $(git rev-parse HEAD); echo $(git rev-parse HEAD^^) $(git rev-parse HEAD)) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (append empty)' ' git notes remove HEAD^ && + test_config notes.rewriteMode concatenate && + test_config notes.rewriteRef "refs/notes/*" && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th - -Notes (other): - replacement note 1 -EOF - test_expect_success 'GIT_NOTES_REWRITE_MODE works' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 + + ${indent}15th + + Notes: + ${indent}replacement note 1 + EOF + test_config notes.rewriteMode concatenate && + test_config notes.rewriteRef "refs/notes/*" && git notes add -f -m"replacement note 1" HEAD^ && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | GIT_NOTES_REWRITE_MODE=overwrite git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 +test_expect_success 'GIT_NOTES_REWRITE_REF works' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 - 15th + ${indent}15th -Notes (other): - replacement note 2 -EOF - -test_expect_success 'GIT_NOTES_REWRITE_REF works' ' - git config notes.rewriteMode overwrite && + Notes: + ${indent}replacement note 2 + EOF git notes add -f -m"replacement note 2" HEAD^ && - git config --unset-all notes.rewriteRef && + test_config notes.rewriteMode overwrite && + test_unconfig notes.rewriteRef && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | GIT_NOTES_REWRITE_REF=refs/notes/commits:refs/notes/other \ git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' test_expect_success 'GIT_NOTES_REWRITE_REF overrides config' ' - git config notes.rewriteRef refs/notes/other && git notes add -f -m"replacement note 3" HEAD^ && + test_config notes.rewriteMode overwrite && + test_config notes.rewriteRef refs/notes/other && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | GIT_NOTES_REWRITE_REF= git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' test_expect_success 'git notes copy diagnoses too many or too few parameters' ' @@ -1221,13 +1123,13 @@ test_expect_success 'git notes copy diagnoses too many or too few parameters' ' ' test_expect_success 'git notes get-ref (no overrides)' ' - git config --unset core.notesRef && + test_unconfig core.notesRef && sane_unset GIT_NOTES_REF && test "$(git notes get-ref)" = "refs/notes/commits" ' test_expect_success 'git notes get-ref (core.notesRef)' ' - git config core.notesRef refs/notes/foo && + test_config core.notesRef refs/notes/foo && test "$(git notes get-ref)" = "refs/notes/foo" ' @@ -1239,4 +1141,51 @@ test_expect_success 'git notes get-ref (--ref)' ' test "$(GIT_NOTES_REF=refs/notes/bar git notes --ref=baz get-ref)" = "refs/notes/baz" ' +test_expect_success 'setup testing of empty notes' ' + test_unconfig core.notesRef && + test_commit 16th && + empty_blob=$(git hash-object -w /dev/null) && + echo "$empty_blob" >expect_empty +' + +while read cmd +do + test_expect_success "'git notes $cmd' removes empty note" " + test_might_fail git notes remove HEAD && + MSG= git notes $cmd && + test_must_fail git notes list HEAD + " + + test_expect_success "'git notes $cmd --allow-empty' stores empty note" " + test_might_fail git notes remove HEAD && + MSG= git notes $cmd --allow-empty && + git notes list HEAD >actual && + test_cmp expect_empty actual + " +done <<\EOF +add +add -F /dev/null +add -m "" +add -c "$empty_blob" +add -C "$empty_blob" +append +append -F /dev/null +append -m "" +append -c "$empty_blob" +append -C "$empty_blob" +edit +EOF + +test_expect_success 'empty notes are displayed by git log' ' + test_commit 17th && + git log -1 >expect && + cat >>expect <<-EOF && + + Notes: + EOF + git notes add -C "$empty_blob" --allow-empty && + git log -1 >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3305-notes-fanout.sh b/t/t3305-notes-fanout.sh index b1ea64b213..54460beec4 100755 --- a/t/t3305-notes-fanout.sh +++ b/t/t3305-notes-fanout.sh @@ -51,15 +51,12 @@ test_expect_success 'deleting most notes with git-notes' ' num_notes=250 && i=0 && git rev-list HEAD | - while read sha1 + while test $i -lt $num_notes && read sha1 do i=$(($i + 1)) && - if test $i -gt $num_notes - then - break - fi && test_tick && - git notes remove "$sha1" + git notes remove "$sha1" || + exit 1 done ' diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 8197ed29a9..ac429a0bbb 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -950,7 +950,7 @@ test_expect_success 'rebase --edit-todo can be used to modify todo' ' set_fake_editor && FAKE_LINES="edit 1 2 3" git rebase -i HEAD~3 && FAKE_LINES="2 1" git rebase --edit-todo && - git rebase --continue + git rebase --continue && test M = $(git cat-file commit HEAD^ | sed -ne \$p) && test L = $(git cat-file commit HEAD | sed -ne \$p) ' @@ -1007,7 +1007,7 @@ test_expect_success 'rebase -i with --strategy and -X' ' ' test_expect_success 'rebase -i error on commits with \ in message' ' - current_head=$(git rev-parse HEAD) + current_head=$(git rev-parse HEAD) && test_when_finished "git rebase --abort; git reset --hard $current_head; rm -f error" && test_commit TO-REMOVE will-conflict old-content && test_commit "\temp" will-conflict new-content dummy && @@ -1039,4 +1039,67 @@ test_expect_success 'short SHA-1 collide' ' ) ' +test_expect_success 'respect core.abbrev' ' + git config core.abbrev 12 && + set_cat_todo_editor && + test_must_fail git rebase -i HEAD~4 >todo-list && + test 4 = $(grep -c "pick [0-9a-f]\{12,\}" todo-list) +' + +test_expect_success 'todo count' ' + write_script dump-raw.sh <<-\EOF && + cat "$1" + EOF + test_set_editor "$(pwd)/dump-raw.sh" && + git rebase -i HEAD~4 >actual && + grep "^# Rebase ..* onto ..* ([0-9]" actual +' + +test_expect_success 'rebase -i commits that overwrite untracked files (pick)' ' + git checkout --force branch2 && + git clean -f && + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i A && + test_cmp_rev HEAD F && + test_path_is_missing file6 && + >file6 && + test_must_fail git rebase --continue && + test_cmp_rev HEAD F && + rm file6 && + git rebase --continue && + test_cmp_rev HEAD I +' + +test_expect_success 'rebase -i commits that overwrite untracked files (squash)' ' + git checkout --force branch2 && + git clean -f && + git tag original-branch2 && + set_fake_editor && + FAKE_LINES="edit 1 squash 2" git rebase -i A && + test_cmp_rev HEAD F && + test_path_is_missing file6 && + >file6 && + test_must_fail git rebase --continue && + test_cmp_rev HEAD F && + rm file6 && + git rebase --continue && + test $(git cat-file commit HEAD | sed -ne \$p) = I && + git reset --hard original-branch2 +' + +test_expect_success 'rebase -i commits that overwrite untracked files (no ff)' ' + git checkout --force branch2 && + git clean -f && + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i --no-ff A && + test $(git cat-file commit HEAD | sed -ne \$p) = F && + test_path_is_missing file6 && + >file6 && + test_must_fail git rebase --continue && + test $(git cat-file commit HEAD | sed -ne \$p) = F && + rm file6 && + git rebase --continue && + test $(git cat-file commit HEAD | sed -ne \$p) = I +' + test_done diff --git a/t/t3405-rebase-malformed.sh b/t/t3405-rebase-malformed.sh index 19eddadcf7..ff8c360cd5 100755 --- a/t/t3405-rebase-malformed.sh +++ b/t/t3405-rebase-malformed.sh @@ -24,7 +24,7 @@ test_expect_success setup ' git add file1 file2 && test_tick && git commit -m "Initial commit" && - git branch diff-in-message + git branch diff-in-message && git checkout -b multi-line-subject && cat F >file2 && @@ -36,7 +36,7 @@ test_expect_success setup ' git checkout diff-in-message && echo "commit log message containing a diff" >G && - echo "" >>G + echo "" >>G && cat G >file2 && git add file2 && git diff --cached >>G && diff --git a/t/t3425-rebase-topology-merges.sh b/t/t3425-rebase-topology-merges.sh index 1d195fbd64..846f85c27e 100755 --- a/t/t3425-rebase-topology-merges.sh +++ b/t/t3425-rebase-topology-merges.sh @@ -24,7 +24,7 @@ test_expect_success 'setup of non-linear-history' ' test_commit c && git checkout b && test_commit d && - test_commit e + test_commit e && git checkout c && test_commit g && @@ -33,7 +33,7 @@ test_expect_success 'setup of non-linear-history' ' cherry_pick gp g && test_commit i && git checkout b && - test_commit f + test_commit f && git checkout d && test_commit n && diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh index 223b98433c..7c5ad08626 100755 --- a/t/t3507-cherry-pick-conflict.sh +++ b/t/t3507-cherry-pick-conflict.sh @@ -351,19 +351,45 @@ test_expect_success 'commit after failed cherry-pick does not add duplicated -s' test_expect_success 'commit after failed cherry-pick adds -s at the right place' ' pristine_detach initial && test_must_fail git cherry-pick picked && + git commit -a -s && - pwd && - cat <<EOF > expected && -picked -Signed-off-by: C O Mitter <committer@example.com> + # Do S-o-b and Conflicts appear in the right order? + cat <<-\EOF >expect && + Signed-off-by: C O Mitter <committer@example.com> + # Conflicts: + EOF + grep -e "^# Conflicts:" -e '^Signed-off-by' <.git/COMMIT_EDITMSG >actual && + test_cmp expect actual && + + cat <<-\EOF >expected && + picked -Conflicts: - foo -EOF + Signed-off-by: C O Mitter <committer@example.com> + EOF - git show -s --pretty=format:%B > actual && + git show -s --pretty=format:%B >actual && test_cmp expected actual ' +test_expect_success 'commit --amend -s places the sign-off at the right place' ' + pristine_detach initial && + test_must_fail git cherry-pick picked && + + # emulate old-style conflicts block + mv .git/MERGE_MSG .git/MERGE_MSG+ && + sed -e "/^# Conflicts:/,\$s/^# *//" <.git/MERGE_MSG+ >.git/MERGE_MSG && + + git commit -a && + git commit --amend -s && + + # Do S-o-b and Conflicts appear in the right order? + cat <<-\EOF >expect && + Signed-off-by: C O Mitter <committer@example.com> + Conflicts: + EOF + grep -e "^Conflicts:" -e '^Signed-off-by' <.git/COMMIT_EDITMSG >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3511-cherry-pick-x.sh b/t/t3511-cherry-pick-x.sh index f97727975b..b7dff09d06 100755 --- a/t/t3511-cherry-pick-x.sh +++ b/t/t3511-cherry-pick-x.sh @@ -36,6 +36,20 @@ mesg_with_cherry_footer="$mesg_with_footer_sob (cherry picked from commit da39a3ee5e6b4b0d3255bfef95601890afd80709) Tested-by: C.U. Thor <cuthor@example.com>" +mesg_unclean="$mesg_one_line + + +leading empty lines + + +consecutive empty lines + +# hash tag comment + +trailing empty lines + + +" test_expect_success setup ' git config advice.detachedhead false && @@ -53,6 +67,10 @@ test_expect_success setup ' test_commit "$mesg_with_footer_sob" foo b mesg-with-footer-sob && git reset --hard initial && test_commit "$mesg_with_cherry_footer" foo b mesg-with-cherry-footer && + git reset --hard initial && + test_config commit.cleanup verbatim && + test_commit "$mesg_unclean" foo b mesg-unclean && + test_unconfig commit.cleanup && pristine_detach initial && test_commit conflicting unrelated ' @@ -216,4 +234,14 @@ test_expect_success 'cherry-pick -x -s treats "(cherry picked from..." line as p test_cmp expect actual ' +test_expect_success 'cherry-pick preserves commit message' ' + pristine_detach initial && + printf "$mesg_unclean" >expect && + git log -1 --pretty=format:%B mesg-unclean >actual && + test_cmp expect actual && + git cherry-pick mesg-unclean && + git log -1 --pretty=format:%B >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index e00d7d2b61..9d90d2c935 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -38,37 +38,37 @@ test_expect_success \ test_expect_success \ 'Test that git rm --cached foo succeeds if the index matches the file' \ - 'echo content > foo - git add foo + 'echo content >foo && + git add foo && git rm --cached foo' test_expect_success \ 'Test that git rm --cached foo succeeds if the index matches the file' \ - 'echo content > foo - git add foo - git commit -m foo - echo "other content" > foo + 'echo content >foo && + git add foo && + git commit -m foo && + echo "other content" >foo && git rm --cached foo' test_expect_success \ 'Test that git rm --cached foo fails if the index matches neither the file nor HEAD' ' - echo content > foo - git add foo - git commit -m foo - echo "other content" > foo - git add foo - echo "yet another content" > foo + echo content >foo && + git add foo && + git commit -m foo --allow-empty && + echo "other content" >foo && + git add foo && + echo "yet another content" >foo && test_must_fail git rm --cached foo ' test_expect_success \ 'Test that git rm --cached -f foo works in case where --cached only did not' \ - 'echo content > foo - git add foo - git commit -m foo - echo "other content" > foo - git add foo - echo "yet another content" > foo + 'echo content >foo && + git add foo && + git commit -m foo --allow-empty && + echo "other content" >foo && + git add foo && + echo "yet another content" >foo && git rm --cached -f foo' test_expect_success \ @@ -170,7 +170,7 @@ test_expect_success 'but with -f it should work.' ' git rm -f foo baz && test ! -f foo && test ! -f baz && - test_must_fail git ls-files --error-unmatch foo + test_must_fail git ls-files --error-unmatch foo && test_must_fail git ls-files --error-unmatch baz ' @@ -183,7 +183,7 @@ test_expect_success 'refuse to remove cached empty file with modifications' ' test_expect_success 'remove intent-to-add file without --force' ' echo content >intent-to-add && - git add -N intent-to-add + git add -N intent-to-add && git rm --cached intent-to-add ' @@ -201,7 +201,7 @@ test_expect_success 'Recursive without -r fails' ' ' test_expect_success 'Recursive with -r but dirty' ' - echo qfwfq >>frotz/nitfol + echo qfwfq >>frotz/nitfol && test_must_fail git rm -r frotz && test -d frotz && test -f frotz/nitfol diff --git a/t/t3702-add-edit.sh b/t/t3702-add-edit.sh index 4ee47cc9a8..3cb74ca296 100755 --- a/t/t3702-add-edit.sh +++ b/t/t3702-add-edit.sh @@ -118,4 +118,11 @@ test_expect_success 'add -e' ' ' +test_expect_success 'add -e notices editor failure' ' + git reset --hard && + echo change >>file && + test_must_fail env GIT_EDITOR=false git add -e && + test_expect_code 1 git diff --exit-code +' + test_done diff --git a/t/t3901-i18n-patch.sh b/t/t3901-i18n-patch.sh index a392f3d1d6..75cf3ff9bd 100755 --- a/t/t3901-i18n-patch.sh +++ b/t/t3901-i18n-patch.sh @@ -9,7 +9,7 @@ test_description='i18n settings and format-patch | am pipe' check_encoding () { # Make sure characters are not corrupted - cnt="$1" header="$2" i=1 j=0 bad=0 + cnt="$1" header="$2" i=1 j=0 while test "$i" -le $cnt do git format-patch --encoding=UTF-8 --stdout HEAD~$i..HEAD~$j | @@ -20,14 +20,10 @@ check_encoding () { grep "^encoding ISO8859-1" ;; *) grep "^encoding ISO8859-1"; test "$?" != 0 ;; - esac || { - bad=1 - break - } + esac || return 1 j=$i i=$(($i+1)) done - (exit $bad) } test_expect_success setup ' diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 1e29962fad..7396ca9911 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -10,6 +10,8 @@ test_description='Test git stash' test_expect_success 'stash some dirty working directory' ' echo 1 > file && git add file && + echo unrelated >other-file && + git add other-file && test_tick && git commit -m initial && echo 2 > file && @@ -43,10 +45,15 @@ test_expect_success 'applying bogus stash does nothing' ' test_cmp expect file ' +test_expect_success 'apply requires a clean index' ' + test_when_finished "git reset --hard" && + echo changed >other-file && + git add other-file && + test_must_fail git stash apply +' + test_expect_success 'apply does not need clean working directory' ' echo 4 >other-file && - git add other-file && - echo 5 >other-file && git stash apply && echo 3 >expect && test_cmp expect file @@ -93,6 +100,10 @@ test_expect_success 'unstashing in a subdirectory' ' ) ' +test_expect_success 'stash drop complains of extra options' ' + test_must_fail git stash drop --foo +' + test_expect_success 'drop top stash' ' git reset --hard && git stash list > stashlist1 && @@ -695,8 +706,8 @@ test_expect_success 'setup stash with index and worktree changes' ' ' test_expect_success 'stash list implies --first-parent -m' ' - cat >expect <<-\EOF && - stash@{0}: WIP on master: b27a2bc subdir + cat >expect <<-EOF && + stash@{0} diff --git a/file b/file index 257cc56..d26b33d 100644 @@ -706,13 +717,13 @@ test_expect_success 'stash list implies --first-parent -m' ' -foo +working EOF - git stash list -p >actual && + git stash list --format=%gd -p >actual && test_cmp expect actual ' test_expect_success 'stash list --cc shows combined diff' ' cat >expect <<-\EOF && - stash@{0}: WIP on master: b27a2bc subdir + stash@{0} diff --cc file index 257cc56,9015a7a..d26b33d @@ -723,7 +734,7 @@ test_expect_success 'stash list --cc shows combined diff' ' -index ++working EOF - git stash list -p --cc >actual && + git stash list --format=%gd -p --cc >actual && test_cmp expect actual ' diff --git a/t/t4003-diff-rename-1.sh b/t/t4003-diff-rename-1.sh index bfa8835638..df2accb655 100755 --- a/t/t4003-diff-rename-1.sh +++ b/t/t4003-diff-rename-1.sh @@ -11,7 +11,7 @@ test_description='More rename detection test_expect_success \ 'prepare reference tree' \ - 'cat "$TEST_DIRECTORY"/../COPYING >COPYING && + 'cat "$TEST_DIRECTORY"/diff-lib/COPYING >COPYING && echo frotz >rezrov && git update-index --add COPYING rezrov && tree=$(git write-tree) && @@ -99,7 +99,7 @@ test_expect_success \ test_expect_success \ 'prepare work tree once again' \ - 'cat "$TEST_DIRECTORY"/../COPYING >COPYING && + 'cat "$TEST_DIRECTORY"/diff-lib/COPYING >COPYING && git update-index --add --remove COPYING COPYING.1' # tree has COPYING and rezrov. work tree has COPYING and COPYING.1, diff --git a/t/t4005-diff-rename-2.sh b/t/t4005-diff-rename-2.sh index 7d2c6e13a2..135addbfbd 100755 --- a/t/t4005-diff-rename-2.sh +++ b/t/t4005-diff-rename-2.sh @@ -11,7 +11,7 @@ test_description='Same rename detection as t4003 but testing diff-raw. test_expect_success \ 'prepare reference tree' \ - 'cat "$TEST_DIRECTORY"/../COPYING >COPYING && + 'cat "$TEST_DIRECTORY"/diff-lib/COPYING >COPYING && echo frotz >rezrov && git update-index --add COPYING rezrov && tree=$(git write-tree) && @@ -71,7 +71,7 @@ test_expect_success \ test_expect_success \ 'prepare work tree once again' \ - 'cat "$TEST_DIRECTORY"/../COPYING >COPYING && + 'cat "$TEST_DIRECTORY"/diff-lib/COPYING >COPYING && git update-index --add --remove COPYING COPYING.1' git diff-index -C --find-copies-harder $tree >current diff --git a/t/t4007-rename-3.sh b/t/t4007-rename-3.sh index 11502b7509..dae327fabb 100755 --- a/t/t4007-rename-3.sh +++ b/t/t4007-rename-3.sh @@ -11,7 +11,7 @@ test_description='Rename interaction with pathspec. test_expect_success 'prepare reference tree' ' mkdir path0 path1 && - cp "$TEST_DIRECTORY"/../COPYING path0/COPYING && + cp "$TEST_DIRECTORY"/diff-lib/COPYING path0/COPYING && git update-index --add path0/COPYING && tree=$(git write-tree) && echo $tree diff --git a/t/t4008-diff-break-rewrite.sh b/t/t4008-diff-break-rewrite.sh index 27e98a8f9d..9dd1bc5e16 100755 --- a/t/t4008-diff-break-rewrite.sh +++ b/t/t4008-diff-break-rewrite.sh @@ -10,179 +10,145 @@ We have two very different files, file0 and file1, registered in a tree. We update file1 so drastically that it is more similar to file0, and then remove file0. With -B, changes to file1 should be broken into separate delete and create, resulting in removal of file0, removal of -original file1 and creation of completely rewritten file1. +original file1 and creation of completely rewritten file1. The latter +two are then merged back into a single "complete rewrite". Further, with -B and -M together, these three modifications should turn into rename-edit of file0 into file1. Starting from the same two files in the tree, we swap file0 and file1. -With -B, this should be detected as two complete rewrites, resulting in -four changes in total. +With -B, this should be detected as two complete rewrites. Further, with -B and -M together, these should turn into two renames. ' . ./test-lib.sh . "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash -test_expect_success \ - setup \ - 'cat "$TEST_DIRECTORY"/../README >file0 && - cat "$TEST_DIRECTORY"/../COPYING >file1 && - git update-index --add file0 file1 && - tree=$(git write-tree) && - echo "$tree"' - -test_expect_success \ - 'change file1 with copy-edit of file0 and remove file0' \ - 'sed -e "s/git/GIT/" file0 >file1 && - rm -f file0 && - git update-index --remove file0 file1' - -test_expect_success \ - 'run diff with -B' \ - 'git diff-index -B --cached "$tree" >current' - -cat >expected <<\EOF -:100644 000000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 0000000000000000000000000000000000000000 D file0 -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 11e331465a89c394dc25c780de230043750c1ec8 M100 file1 -EOF - -test_expect_success \ - 'validate result of -B (#1)' \ - 'compare_diff_raw expected current' - -test_expect_success \ - 'run diff with -B and -M' \ - 'git diff-index -B -M "$tree" >current' - -cat >expected <<\EOF -:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 08bb2fb671deff4c03a4d4a0a1315dff98d5732c R100 file0 file1 -EOF - -test_expect_success \ - 'validate result of -B -M (#2)' \ - 'compare_diff_raw expected current' - -test_expect_success \ - 'swap file0 and file1' \ - 'rm -f file0 file1 && - git read-tree -m $tree && - git checkout-index -f -u -a && - mv file0 tmp && - mv file1 file0 && - mv tmp file1 && - git update-index file0 file1' - -test_expect_success \ - 'run diff with -B' \ - 'git diff-index -B "$tree" >current' - -cat >expected <<\EOF -:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 6ff87c4664981e4397625791c8ea3bbb5f2279a3 M100 file0 -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 M100 file1 -EOF - -test_expect_success \ - 'validate result of -B (#3)' \ - 'compare_diff_raw expected current' - -test_expect_success \ - 'run diff with -B and -M' \ - 'git diff-index -B -M "$tree" >current' - -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 6ff87c4664981e4397625791c8ea3bbb5f2279a3 R100 file1 file0 -:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 R100 file0 file1 -EOF - -test_expect_success \ - 'validate result of -B -M (#4)' \ - 'compare_diff_raw expected current' - -test_expect_success \ - 'make file0 into something completely different' \ - 'rm -f file0 && - test_ln_s_add frotz file0 && - git update-index file1' - -test_expect_success \ - 'run diff with -B' \ - 'git diff-index -B "$tree" >current' - -cat >expected <<\EOF -:100644 120000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 67be421f88824578857624f7b3dc75e99a8a1481 T file0 -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 M100 file1 -EOF - -test_expect_success \ - 'validate result of -B (#5)' \ - 'compare_diff_raw expected current' - -test_expect_success \ - 'run diff with -B -M' \ - 'git diff-index -B -M "$tree" >current' - -# file0 changed from regular to symlink. file1 is very close to the preimage of file0. -# because we break file0, file1 can become a rename of it. -cat >expected <<\EOF -:100644 120000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 67be421f88824578857624f7b3dc75e99a8a1481 T file0 -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 R file0 file1 -EOF - -test_expect_success \ - 'validate result of -B -M (#6)' \ - 'compare_diff_raw expected current' - -test_expect_success \ - 'run diff with -M' \ - 'git diff-index -M "$tree" >current' - -# This should not mistake file0 as the copy source of new file1 -# due to type differences. -cat >expected <<\EOF -:100644 120000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 67be421f88824578857624f7b3dc75e99a8a1481 T file0 -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 M file1 -EOF - -test_expect_success \ - 'validate result of -M (#7)' \ - 'compare_diff_raw expected current' - -test_expect_success \ - 'file1 edited to look like file0 and file0 rename-edited to file2' \ - 'rm -f file0 file1 && - git read-tree -m $tree && - git checkout-index -f -u -a && - sed -e "s/git/GIT/" file0 >file1 && - sed -e "s/git/GET/" file0 >file2 && - rm -f file0 && - git update-index --add --remove file0 file1 file2' - -test_expect_success \ - 'run diff with -B' \ - 'git diff-index -B "$tree" >current' - -cat >expected <<\EOF -:100644 000000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 0000000000000000000000000000000000000000 D file0 -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 08bb2fb671deff4c03a4d4a0a1315dff98d5732c M100 file1 -:000000 100644 0000000000000000000000000000000000000000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 A file2 -EOF - -test_expect_success \ - 'validate result of -B (#8)' \ - 'compare_diff_raw expected current' - -test_expect_success \ - 'run diff with -B -C' \ - 'git diff-index -B -C "$tree" >current' - -cat >expected <<\EOF -:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 08bb2fb671deff4c03a4d4a0a1315dff98d5732c C095 file0 file1 -:100644 100644 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 59f832e5c8b3f7e486be15ad0cd3e95ba9af8998 R095 file0 file2 -EOF - -test_expect_success \ - 'validate result of -B -M (#9)' \ - 'compare_diff_raw expected current' +test_expect_success setup ' + cat "$TEST_DIRECTORY"/diff-lib/README >file0 && + cat "$TEST_DIRECTORY"/diff-lib/COPYING >file1 && + git update-index --add file0 file1 && + git tag reference $(git write-tree) +' + +test_expect_success 'change file1 with copy-edit of file0 and remove file0' ' + sed -e "s/git/GIT/" file0 >file1 && + rm -f file0 && + git update-index --remove file0 file1 +' + +test_expect_success 'run diff with -B (#1)' ' + git diff-index -B --cached reference >current && + cat >expect <<-\EOF && + :100644 000000 548142c327a6790ff8821d67c2ee1eff7a656b52 0000000000000000000000000000000000000000 D file0 + :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec M100 file1 + EOF + compare_diff_raw expect current +' + +test_expect_success 'run diff with -B and -M (#2)' ' + git diff-index -B -M reference >current && + cat >expect <<-\EOF && + :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec R100 file0 file1 + EOF + compare_diff_raw expect current +' + +test_expect_success 'swap file0 and file1' ' + rm -f file0 file1 && + git read-tree -m reference && + git checkout-index -f -u -a && + mv file0 tmp && + mv file1 file0 && + mv tmp file1 && + git update-index file0 file1 +' + +test_expect_success 'run diff with -B (#3)' ' + git diff-index -B reference >current && + cat >expect <<-\EOF && + :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 6ff87c4664981e4397625791c8ea3bbb5f2279a3 M100 file0 + :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 548142c327a6790ff8821d67c2ee1eff7a656b52 M100 file1 + EOF + compare_diff_raw expect current +' + +test_expect_success 'run diff with -B and -M (#4)' ' + git diff-index -B -M reference >current && + cat >expect <<-\EOF && + :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 6ff87c4664981e4397625791c8ea3bbb5f2279a3 R100 file1 file0 + :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 548142c327a6790ff8821d67c2ee1eff7a656b52 R100 file0 file1 + EOF + compare_diff_raw expect current +' + +test_expect_success 'make file0 into something completely different' ' + rm -f file0 && + test_ln_s_add frotz file0 && + git update-index file1 +' + +test_expect_success 'run diff with -B (#5)' ' + git diff-index -B reference >current && + cat >expect <<-\EOF && + :100644 120000 548142c327a6790ff8821d67c2ee1eff7a656b52 67be421f88824578857624f7b3dc75e99a8a1481 T file0 + :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 548142c327a6790ff8821d67c2ee1eff7a656b52 M100 file1 + EOF + compare_diff_raw expect current +' + +test_expect_success 'run diff with -B -M (#6)' ' + git diff-index -B -M reference >current && + + # file0 changed from regular to symlink. file1 is the same as the preimage + # of file0. Because the change does not make file0 disappear, file1 is + # denoted as a copy of file0 + cat >expect <<-\EOF && + :100644 120000 548142c327a6790ff8821d67c2ee1eff7a656b52 67be421f88824578857624f7b3dc75e99a8a1481 T file0 + :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 548142c327a6790ff8821d67c2ee1eff7a656b52 C file0 file1 + EOF + compare_diff_raw expect current +' + +test_expect_success 'run diff with -M (#7)' ' + git diff-index -M reference >current && + + # This should not mistake file0 as the copy source of new file1 + # due to type differences. + cat >expect <<-\EOF && + :100644 120000 548142c327a6790ff8821d67c2ee1eff7a656b52 67be421f88824578857624f7b3dc75e99a8a1481 T file0 + :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 548142c327a6790ff8821d67c2ee1eff7a656b52 M file1 + EOF + compare_diff_raw expect current +' + +test_expect_success 'file1 edited to look like file0 and file0 rename-edited to file2' ' + rm -f file0 file1 && + git read-tree -m reference && + git checkout-index -f -u -a && + sed -e "s/git/GIT/" file0 >file1 && + sed -e "s/git/GET/" file0 >file2 && + rm -f file0 && + git update-index --add --remove file0 file1 file2 +' + +test_expect_success 'run diff with -B (#8)' ' + git diff-index -B reference >current && + cat >expect <<-\EOF && + :100644 000000 548142c327a6790ff8821d67c2ee1eff7a656b52 0000000000000000000000000000000000000000 D file0 + :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec M100 file1 + :000000 100644 0000000000000000000000000000000000000000 69a939f651686f56322566e2fd76715947a24162 A file2 + EOF + compare_diff_raw expect current +' + +test_expect_success 'run diff with -B -C (#9)' ' + git diff-index -B -C reference >current && + cat >expect <<-\EOF && + :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec C095 file0 file1 + :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 69a939f651686f56322566e2fd76715947a24162 R095 file0 file2 + EOF + compare_diff_raw expect current +' test_done diff --git a/t/t4009-diff-rename-4.sh b/t/t4009-diff-rename-4.sh index 57c094fdce..3641fd84d6 100755 --- a/t/t4009-diff-rename-4.sh +++ b/t/t4009-diff-rename-4.sh @@ -11,7 +11,7 @@ test_description='Same rename detection as t4003 but testing diff-raw -z. test_expect_success \ 'prepare reference tree' \ - 'cat "$TEST_DIRECTORY"/../COPYING >COPYING && + 'cat "$TEST_DIRECTORY"/diff-lib/COPYING >COPYING && echo frotz >rezrov && git update-index --add COPYING rezrov && tree=$(git write-tree) && @@ -78,7 +78,7 @@ test_expect_success \ test_expect_success \ 'prepare work tree once again' \ - 'cat "$TEST_DIRECTORY"/../COPYING >COPYING && + 'cat "$TEST_DIRECTORY"/diff-lib/COPYING >COPYING && git update-index --add --remove COPYING COPYING.1' git diff-index -z -C --find-copies-harder $tree >current diff --git a/t/t4010-diff-pathspec.sh b/t/t4010-diff-pathspec.sh index bf07841866..43c488b545 100755 --- a/t/t4010-diff-pathspec.sh +++ b/t/t4010-diff-pathspec.sh @@ -56,7 +56,7 @@ test_expect_success \ compare_diff_raw current expected' cat >expected <<\EOF -:100644 100644 766498d93a4b06057a8e49d23f4068f1170ff38f 0a41e115ab61be0328a19b29f18cdcb49338d516 M file0 +:100644 100644 8e4020bb5a8d8c873b25de15933e75cc0fc275df dca6b92303befc93086aa025d90a5facd7eb2812 M file0 EOF test_expect_success \ 'limit to file0 should show file0' \ diff --git a/t/t4013/diff.log_--decorate=full_--all b/t/t4013/diff.log_--decorate=full_--all index 44d45257da..b345b2ebfa 100644 --- a/t/t4013/diff.log_--decorate=full_--all +++ b/t/t4013/diff.log_--decorate=full_--all @@ -5,7 +5,7 @@ Date: Mon Jun 26 00:06:00 2006 +0000 Rearranged lines in dir/sub -commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (HEAD, refs/heads/master) +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (HEAD -> refs/heads/master) Merge: 9a6d494 c7a2ab9 Author: A U Thor <author@example.com> Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4013/diff.log_--decorate_--all b/t/t4013/diff.log_--decorate_--all index 27d3eabc26..3aa16a9e42 100644 --- a/t/t4013/diff.log_--decorate_--all +++ b/t/t4013/diff.log_--decorate_--all @@ -5,7 +5,7 @@ Date: Mon Jun 26 00:06:00 2006 +0000 Rearranged lines in dir/sub -commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (HEAD, master) +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (HEAD -> master) Merge: 9a6d494 c7a2ab9 Author: A U Thor <author@example.com> Date: Mon Jun 26 00:04:00 2006 +0000 diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 256affce89..c39e50028f 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -802,7 +802,7 @@ test_expect_success '--no-signature suppresses format.signaturefile ' ' ' test_expect_success '--signature-file overrides format.signaturefile' ' - cat >other-mail-signature <<-\EOF + cat >other-mail-signature <<-\EOF && Use this other signature instead of mail-signature. EOF test_config format.signaturefile mail-signature && diff --git a/t/t4022-diff-rewrite.sh b/t/t4022-diff-rewrite.sh index 2d030a4ec3..cb51d9f9d4 100755 --- a/t/t4022-diff-rewrite.sh +++ b/t/t4022-diff-rewrite.sh @@ -20,10 +20,7 @@ test_expect_success setup ' test_expect_success 'detect rewrite' ' actual=$(git diff-files -B --summary test) && - expr "$actual" : " rewrite test ([0-9]*%)$" || { - echo "Eh? <<$actual>>" - false - } + verbose expr "$actual" : " rewrite test ([0-9]*%)$" ' diff --git a/t/t4023-diff-rename-typechange.sh b/t/t4023-diff-rename-typechange.sh index 55d549fcf4..8c9823765e 100755 --- a/t/t4023-diff-rename-typechange.sh +++ b/t/t4023-diff-rename-typechange.sh @@ -76,7 +76,8 @@ test_expect_success 'moves and renames' ' git diff-tree three four -r --name-status -B -M | sort >actual && { - echo "R100 foo bar" + # see -B -M (#6) in t4008 + echo "C100 foo bar" echo "T100 foo" } | sort >expect && test_cmp expect actual diff --git a/t/t4024-diff-optimize-common.sh b/t/t4024-diff-optimize-common.sh index c4d733f5db..7e76018296 100755 --- a/t/t4024-diff-optimize-common.sh +++ b/t/t4024-diff-optimize-common.sh @@ -139,7 +139,7 @@ test_expect_success setup ' ( printf C; zs $n ) >file-c$n && ( echo D; zs $n ) >file-d$n && - expect_pattern $n || break + expect_pattern $n || return 1 done >expect ' diff --git a/t/t4026-color.sh b/t/t4026-color.sh index 63e423838f..2b32c4fbe6 100755 --- a/t/t4026-color.sh +++ b/t/t4026-color.sh @@ -45,14 +45,33 @@ test_expect_success 'fg bg attr...' ' color "blue bold dim ul blink reverse" "[1;2;4;5;7;34m" ' +# note that nobold and nodim are the same code (22) +test_expect_success 'attr negation' ' + color "nobold nodim noul noblink noreverse" "[22;24;25;27m" +' + test_expect_success 'long color specification' ' color "254 255 bold dim ul blink reverse" "[1;2;4;5;7;38;5;254;48;5;255m" ' +test_expect_success 'absurdly long color specification' ' + color \ + "#ffffff #ffffff bold nobold dim nodim ul noul blink noblink reverse noreverse" \ + "[1;2;4;5;7;22;24;25;27;38;2;255;255;255;48;2;255;255;255m" +' + +test_expect_success '0-7 are aliases for basic ANSI color names' ' + color "0 7" "[30;47m" +' + test_expect_success '256 colors' ' color "254 bold 255" "[1;38;5;254;48;5;255m" ' +test_expect_success '24-bit colors' ' + color "#ff00ff black" "[38;2;255;0;255;40m" +' + test_expect_success '"normal" yields no color at all"' ' color "normal black" "[40m" ' @@ -92,9 +111,9 @@ test_expect_success 'unknown color slots are ignored (branch)' ' ' test_expect_success 'unknown color slots are ignored (status)' ' - git config color.status.nosuchslotwilleverbedefined white || exit - git status - case $? in 0|1) : ok ;; *) false ;; esac + git config color.status.nosuchslotwilleverbedefined white && + { git status; ret=$?; } && + case $ret in 0|1) : ok ;; *) false ;; esac ' test_done diff --git a/t/t4035-diff-quiet.sh b/t/t4035-diff-quiet.sh index e8ae2a03fd..461f4bb583 100755 --- a/t/t4035-diff-quiet.sh +++ b/t/t4035-diff-quiet.sh @@ -29,67 +29,65 @@ test_expect_success 'setup' ' ' test_expect_success 'git diff-tree HEAD^ HEAD' ' - git diff-tree --quiet HEAD^ HEAD >cnt - test $? = 1 && test_line_count = 0 cnt + test_expect_code 1 git diff-tree --quiet HEAD^ HEAD >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff-tree HEAD^ HEAD -- a' ' - git diff-tree --quiet HEAD^ HEAD -- a >cnt - test $? = 0 && test_line_count = 0 cnt + test_expect_code 0 git diff-tree --quiet HEAD^ HEAD -- a >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff-tree HEAD^ HEAD -- b' ' - git diff-tree --quiet HEAD^ HEAD -- b >cnt - test $? = 1 && test_line_count = 0 cnt + test_expect_code 1 git diff-tree --quiet HEAD^ HEAD -- b >cnt && + test_line_count = 0 cnt ' # this diff outputs one line: sha1 of the given head test_expect_success 'echo HEAD | git diff-tree --stdin' ' - echo $(git rev-parse HEAD) | git diff-tree --quiet --stdin >cnt - test $? = 1 && test_line_count = 1 cnt + echo $(git rev-parse HEAD) | + test_expect_code 1 git diff-tree --quiet --stdin >cnt && + test_line_count = 1 cnt ' test_expect_success 'git diff-tree HEAD HEAD' ' - git diff-tree --quiet HEAD HEAD >cnt - test $? = 0 && test_line_count = 0 cnt + test_expect_code 0 git diff-tree --quiet HEAD HEAD >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff-files' ' - git diff-files --quiet >cnt - test $? = 0 && test_line_count = 0 cnt + test_expect_code 0 git diff-files --quiet >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff-index --cached HEAD' ' - git diff-index --quiet --cached HEAD >cnt - test $? = 0 && test_line_count = 0 cnt + test_expect_code 0 git diff-index --quiet --cached HEAD >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff-index --cached HEAD^' ' - git diff-index --quiet --cached HEAD^ >cnt - test $? = 1 && test_line_count = 0 cnt + test_expect_code 1 git diff-index --quiet --cached HEAD^ >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff-index --cached HEAD^' ' echo text >>b && echo 3 >c && - git add . && { - git diff-index --quiet --cached HEAD^ >cnt - test $? = 1 && test_line_count = 0 cnt - } + git add . && + test_expect_code 1 git diff-index --quiet --cached HEAD^ >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff-tree -Stext HEAD^ HEAD -- b' ' - git commit -m "text in b" && { - git diff-tree --quiet -Stext HEAD^ HEAD -- b >cnt - test $? = 1 && test_line_count = 0 cnt - } + git commit -m "text in b" && + test_expect_code 1 git diff-tree --quiet -Stext HEAD^ HEAD -- b >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff-tree -Snot-found HEAD^ HEAD -- b' ' - git diff-tree --quiet -Snot-found HEAD^ HEAD -- b >cnt - test $? = 0 && test_line_count = 0 cnt + test_expect_code 0 git diff-tree --quiet -Snot-found HEAD^ HEAD -- b >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff-files' ' - echo 3 >>c && { - git diff-files --quiet >cnt - test $? = 1 && test_line_count = 0 cnt - } + echo 3 >>c && + test_expect_code 1 git diff-files --quiet >cnt && + test_line_count = 0 cnt ' + test_expect_success 'git diff-index --cached HEAD' ' - git update-index c && { - git diff-index --quiet --cached HEAD >cnt - test $? = 1 && test_line_count = 0 cnt - } + git update-index c && + test_expect_code 1 git diff-index --quiet --cached HEAD >cnt && + test_line_count = 0 cnt ' test_expect_success 'git diff, one file outside repo' ' diff --git a/t/t4041-diff-submodule-option.sh b/t/t4041-diff-submodule-option.sh index e4328964a7..2d9731b52d 100755 --- a/t/t4041-diff-submodule-option.sh +++ b/t/t4041-diff-submodule-option.sh @@ -528,10 +528,12 @@ test_expect_success 'diff --submodule with objects referenced by alternates' ' sha1_before=$(git rev-parse --short HEAD) echo b >b && git add b && - git commit -m b - sha1_after=$(git rev-parse --short HEAD) - echo "Submodule sub $sha1_before..$sha1_after: - > b" >../expected + git commit -m b && + sha1_after=$(git rev-parse --short HEAD) && + { + echo "Submodule sub $sha1_before..$sha1_after:" && + echo " > b" + } >../expected ) && (cd super && (cd sub && @@ -539,7 +541,7 @@ test_expect_success 'diff --submodule with objects referenced by alternates' ' git checkout origin/master ) && git diff --submodule > ../actual - ) + ) && test_cmp expected actual ' diff --git a/t/t4046-diff-unmerged.sh b/t/t4046-diff-unmerged.sh index 25d50a654a..d0f14475ca 100755 --- a/t/t4046-diff-unmerged.sh +++ b/t/t4046-diff-unmerged.sh @@ -8,7 +8,7 @@ test_expect_success setup ' do blob=$(echo $i | git hash-object --stdin) && eval "blob$i=$blob" && - eval "m$i=\"100644 \$blob$i $i\"" || break + eval "m$i=\"100644 \$blob$i $i\"" || return 1 done && paths= && for b in o x @@ -24,9 +24,9 @@ test_expect_success setup ' case "$b" in x) echo "$m1$p" ;; esac && case "$o" in x) echo "$m2$p" ;; esac && case "$t" in x) echo "$m3$p" ;; esac || - break - done || break - done || break + return 1 + done + done done >ls-files-s.expect && git update-index --index-info <ls-files-s.expect && git ls-files -s >ls-files-s.actual && diff --git a/t/t4047-diff-dirstat.sh b/t/t4047-diff-dirstat.sh index ed7e093366..3b8b7921d6 100755 --- a/t/t4047-diff-dirstat.sh +++ b/t/t4047-diff-dirstat.sh @@ -374,7 +374,7 @@ test_expect_success 'later options override earlier options:' ' git diff --dirstat=files,10,cumulative,changes,noncumulative,3 -M HEAD^..HEAD >actual_diff_dirstat_M && test_cmp expect_diff_dirstat_M actual_diff_dirstat_M && git diff --dirstat=files,10,cumulative,changes,noncumulative,3 -C -C HEAD^..HEAD >actual_diff_dirstat_CC && - test_cmp expect_diff_dirstat_CC actual_diff_dirstat_CC + test_cmp expect_diff_dirstat_CC actual_diff_dirstat_CC && git diff --dirstat=files --dirstat=10 --dirstat=cumulative --dirstat=changes --dirstat=noncumulative -X3 HEAD^..HEAD >actual_diff_dirstat && test_cmp expect_diff_dirstat actual_diff_dirstat && git diff --dirstat=files --dirstat=10 --dirstat=cumulative --dirstat=changes --dirstat=noncumulative -X3 -M HEAD^..HEAD >actual_diff_dirstat_M && @@ -973,4 +973,18 @@ test_expect_success 'diff.dirstat=future_param,0,lines should warn, but still wo test_i18ngrep -q "diff\\.dirstat" actual_error ' +test_expect_success '--shortstat --dirstat should output only one dirstat' ' + git diff --shortstat --dirstat=changes HEAD^..HEAD >out && + grep " dst/copy/changed/$" out >actual_diff_shortstat_dirstat_changes && + test_line_count = 1 actual_diff_shortstat_dirstat_changes && + + git diff --shortstat --dirstat=lines HEAD^..HEAD >out && + grep " dst/copy/changed/$" out >actual_diff_shortstat_dirstat_lines && + test_line_count = 1 actual_diff_shortstat_dirstat_lines && + + git diff --shortstat --dirstat=files HEAD^..HEAD >out && + grep " dst/copy/changed/$" out >actual_diff_shortstat_dirstat_files && + test_line_count = 1 actual_diff_shortstat_dirstat_files +' + test_done diff --git a/t/t4049-diff-stat-count.sh b/t/t4049-diff-stat-count.sh index 5b594e878f..a34121740a 100755 --- a/t/t4049-diff-stat-count.sh +++ b/t/t4049-diff-stat-count.sh @@ -18,7 +18,7 @@ test_expect_success 'mode-only change show as a 0-line change' ' test_chmod +x b d && echo a >a && echo c >c && - cat >expect <<-\EOF + cat >expect <<-\EOF && a | 1 + b | 0 ... @@ -33,7 +33,7 @@ test_expect_success 'binary changes do not count in lines' ' echo a >a && echo c >c && cat "$TEST_DIRECTORY"/test-binary-1.png >d && - cat >expect <<-\EOF + cat >expect <<-\EOF && a | 1 + c | 1 + ... @@ -55,7 +55,7 @@ test_expect_success 'exclude unmerged entries from total file count' ' done | git update-index --index-info && echo d >d && - cat >expect <<-\EOF + cat >expect <<-\EOF && a | 1 + b | 1 + ... diff --git a/t/t4052-stat-output.sh b/t/t4052-stat-output.sh index b68afefa3c..9f563db20a 100755 --- a/t/t4052-stat-output.sh +++ b/t/t4052-stat-output.sh @@ -94,15 +94,15 @@ EOF while read verb expect cmd args do test_expect_success "$cmd $verb COLUMNS (big change)" ' - COLUMNS=200 git $cmd $args >output + COLUMNS=200 git $cmd $args >output && grep " | " output >actual && test_cmp "$expect" actual ' - test "$cmd" != diff || continue + case "$cmd" in diff|show) continue;; esac test_expect_success "$cmd --graph $verb COLUMNS (big change)" ' - COLUMNS=200 git $cmd $args --graph >output + COLUMNS=200 git $cmd $args --graph >output && grep " | " output >actual && test_cmp "$expect-graph" actual ' @@ -122,15 +122,15 @@ EOF while read verb expect cmd args do test_expect_success "$cmd $verb not enough COLUMNS (big change)" ' - COLUMNS=40 git $cmd $args >output + COLUMNS=40 git $cmd $args >output && grep " | " output >actual && test_cmp "$expect" actual ' - test "$cmd" != diff || continue + case "$cmd" in diff|show) continue;; esac test_expect_success "$cmd --graph $verb not enough COLUMNS (big change)" ' - COLUMNS=40 git $cmd $args --graph >output + COLUMNS=40 git $cmd $args --graph >output && grep " | " output >actual && test_cmp "$expect-graph" actual ' @@ -150,15 +150,15 @@ EOF while read verb expect cmd args do test_expect_success "$cmd $verb statGraphWidth config" ' - git -c diff.statGraphWidth=26 $cmd $args >output + git -c diff.statGraphWidth=26 $cmd $args >output && grep " | " output >actual && test_cmp "$expect" actual ' - test "$cmd" != diff || continue + case "$cmd" in diff|show) continue;; esac test_expect_success "$cmd --graph $verb statGraphWidth config" ' - git -c diff.statGraphWidth=26 $cmd $args --graph >output + git -c diff.statGraphWidth=26 $cmd $args --graph >output && grep " | " output >actual && test_cmp "$expect-graph" actual ' @@ -179,33 +179,33 @@ EOF while read cmd args do test_expect_success "$cmd --stat=width with big change" ' - git $cmd $args --stat=40 >output + git $cmd $args --stat=40 >output && grep " | " output >actual && test_cmp expect actual ' test_expect_success "$cmd --stat-width=width with big change" ' - git $cmd $args --stat-width=40 >output + git $cmd $args --stat-width=40 >output && grep " | " output >actual && test_cmp expect actual ' test_expect_success "$cmd --stat-graph-width with big change" ' - git $cmd $args --stat-graph-width=26 >output + git $cmd $args --stat-graph-width=26 >output && grep " | " output >actual && test_cmp expect actual ' - test "$cmd" != diff || continue + case "$cmd" in diff|show) continue;; esac test_expect_success "$cmd --stat-width=width --graph with big change" ' - git $cmd $args --stat-width=40 --graph >output + git $cmd $args --stat-width=40 --graph >output && grep " | " output >actual && test_cmp expect-graph actual ' test_expect_success "$cmd --stat-graph-width --graph with big change" ' - git $cmd $args --stat-graph-width=26 --graph >output + git $cmd $args --stat-graph-width=26 --graph >output && grep " | " output >actual && test_cmp expect-graph actual ' @@ -236,7 +236,7 @@ do test_cmp expect actual ' - test "$cmd" != diff || continue + case "$cmd" in diff|show) continue;; esac test_expect_success "$cmd --stat=width --graph with big change is balanced" ' git $cmd $args --stat-width=60 --graph >output && @@ -265,15 +265,15 @@ EOF while read verb expect cmd args do test_expect_success "$cmd $verb COLUMNS (long filename)" ' - COLUMNS=200 git $cmd $args >output + COLUMNS=200 git $cmd $args >output && grep " | " output >actual && test_cmp "$expect" actual ' - test "$cmd" != diff || continue + case "$cmd" in diff|show) continue;; esac test_expect_success "$cmd --graph $verb COLUMNS (long filename)" ' - COLUMNS=200 git $cmd $args --graph >output + COLUMNS=200 git $cmd $args --graph >output && grep " | " output >actual && test_cmp "$expect-graph" actual ' @@ -294,16 +294,16 @@ while read verb expect cmd args do test_expect_success COLUMNS_CAN_BE_1 \ "$cmd $verb prefix greater than COLUMNS (big change)" ' - COLUMNS=1 git $cmd $args >output + COLUMNS=1 git $cmd $args >output && grep " | " output >actual && test_cmp "$expect" actual ' - test "$cmd" != diff || continue + case "$cmd" in diff|show) continue;; esac test_expect_success COLUMNS_CAN_BE_1 \ "$cmd --graph $verb prefix greater than COLUMNS (big change)" ' - COLUMNS=1 git $cmd $args --graph >output + COLUMNS=1 git $cmd $args --graph >output && grep " | " output >actual && test_cmp "$expect-graph" actual ' @@ -320,7 +320,7 @@ EOF test_expect_success 'merge --stat respects COLUMNS (big change)' ' git checkout -b branch HEAD^^ && COLUMNS=100 git merge --stat --no-ff master^ >output && - grep " | " output >actual + grep " | " output >actual && test_cmp expect actual ' @@ -329,7 +329,7 @@ cat >expect <<'EOF' EOF test_expect_success 'merge --stat respects COLUMNS (long filename)' ' COLUMNS=100 git merge --stat --no-ff master >output && - grep " | " output >actual + grep " | " output >actual && test_cmp expect actual ' diff --git a/t/t4053-diff-no-index.sh b/t/t4053-diff-no-index.sh index 2ab3c48734..6eb83211b5 100755 --- a/t/t4053-diff-no-index.sh +++ b/t/t4053-diff-no-index.sh @@ -17,8 +17,8 @@ test_expect_success 'setup' ' ' test_expect_success 'git diff --no-index directories' ' - git diff --no-index a b >cnt - test $? = 1 && test_line_count = 14 cnt + test_expect_code 1 git diff --no-index a b >cnt && + test_line_count = 14 cnt ' test_expect_success 'git diff --no-index relative path outside repo' ' @@ -55,4 +55,38 @@ test_expect_success 'git diff --no-index executed outside repo gives correct err ) ' +test_expect_success 'diff D F and diff F D' ' + ( + cd repo && + echo in-repo >a && + echo non-repo >../non/git/a && + mkdir sub && + echo sub-repo >sub/a && + + test_must_fail git diff --no-index sub/a ../non/git/a >expect && + test_must_fail git diff --no-index sub/a ../non/git/ >actual && + test_cmp expect actual && + + test_must_fail git diff --no-index a ../non/git/a >expect && + test_must_fail git diff --no-index a ../non/git/ >actual && + test_cmp expect actual && + + test_must_fail git diff --no-index ../non/git/a a >expect && + test_must_fail git diff --no-index ../non/git a >actual && + test_cmp expect actual + ) +' + +test_expect_success 'turning a file into a directory' ' + ( + cd non/git && + mkdir d e e/sub && + echo 1 >d/sub && + echo 2 >e/sub/file && + printf "D\td/sub\nA\te/sub/file\n" >expect && + test_must_fail git diff --no-index --name-status d e >actual && + test_cmp expect actual + ) +' + test_done diff --git a/t/t4054-diff-bogus-tree.sh b/t/t4054-diff-bogus-tree.sh index 0843c87890..1d6efab3c5 100755 --- a/t/t4054-diff-bogus-tree.sh +++ b/t/t4054-diff-bogus-tree.sh @@ -16,7 +16,7 @@ test_expect_success 'create bogus tree' ' test_expect_success 'create tree with matching file' ' echo bar >foo && git add foo && - good_tree=$(git write-tree) + good_tree=$(git write-tree) && blob=$(git rev-parse :foo) ' diff --git a/t/t4058-diff-duplicates.sh b/t/t4058-diff-duplicates.sh new file mode 100755 index 0000000000..0a23242cb6 --- /dev/null +++ b/t/t4058-diff-duplicates.sh @@ -0,0 +1,79 @@ +#!/bin/sh + +test_description='test tree diff when trees have duplicate entries' +. ./test-lib.sh + +# make_tree_entry <mode> <mode> <sha1> +# +# We have to rely on perl here because not all printfs understand +# hex escapes (only octal), and xxd is not portable. +make_tree_entry () { + printf '%s %s\0' "$1" "$2" && + perl -e 'print chr(hex($_)) for ($ARGV[0] =~ /../g)' "$3" +} + +# Like git-mktree, but without all of the pesky sanity checking. +# Arguments come in groups of three, each group specifying a single +# tree entry (see make_tree_entry above). +make_tree () { + while test $# -gt 2; do + make_tree_entry "$1" "$2" "$3" + shift; shift; shift + done | + git hash-object -w -t tree --stdin +} + +# this is kind of a convoluted setup, but matches +# a real-world case. Each tree contains four entries +# for the given path, one with one sha1, and three with +# the other. The first tree has them split across +# two subtrees (which are themselves duplicate entries in +# the root tree), and the second has them all in a single subtree. +test_expect_success 'create trees with duplicate entries' ' + blob_one=$(echo one | git hash-object -w --stdin) && + blob_two=$(echo two | git hash-object -w --stdin) && + inner_one_a=$(make_tree \ + 100644 inner $blob_one + ) && + inner_one_b=$(make_tree \ + 100644 inner $blob_two \ + 100644 inner $blob_two \ + 100644 inner $blob_two + ) && + outer_one=$(make_tree \ + 040000 outer $inner_one_a \ + 040000 outer $inner_one_b + ) && + inner_two=$(make_tree \ + 100644 inner $blob_one \ + 100644 inner $blob_two \ + 100644 inner $blob_two \ + 100644 inner $blob_two + ) && + outer_two=$(make_tree \ + 040000 outer $inner_two + ) && + git tag one $outer_one && + git tag two $outer_two +' + +test_expect_success 'diff-tree between trees' ' + { + printf ":000000 100644 $_z40 $blob_two A\touter/inner\n" && + printf ":000000 100644 $_z40 $blob_two A\touter/inner\n" && + printf ":000000 100644 $_z40 $blob_two A\touter/inner\n" && + printf ":100644 000000 $blob_two $_z40 D\touter/inner\n" && + printf ":100644 000000 $blob_two $_z40 D\touter/inner\n" && + printf ":100644 000000 $blob_two $_z40 D\touter/inner\n" + } >expect && + git diff-tree -r --no-abbrev one two >actual && + test_cmp expect actual +' + +test_expect_success 'diff-tree with renames' ' + # same expectation as above, since we disable rename detection + git diff-tree -M -r --no-abbrev one two >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t4104-apply-boundary.sh b/t/t4104-apply-boundary.sh index c617c2a33d..32e3b0ee0b 100755 --- a/t/t4104-apply-boundary.sh +++ b/t/t4104-apply-boundary.sh @@ -18,7 +18,7 @@ test_expect_success setup ' cat victim >original && git update-index --add victim && - : add to the head + # add to the head for i in a b '"$L"' y do echo $i @@ -27,7 +27,7 @@ test_expect_success setup ' git diff victim >add-a-patch.with && git diff --unified=0 >add-a-patch.without && - : insert at line two + # insert at line two for i in b a '"$L"' y do echo $i @@ -36,7 +36,7 @@ test_expect_success setup ' git diff victim >insert-a-patch.with && git diff --unified=0 >insert-a-patch.without && - : modify at the head + # modify at the head for i in a '"$L"' y do echo $i @@ -45,16 +45,16 @@ test_expect_success setup ' git diff victim >mod-a-patch.with && git diff --unified=0 >mod-a-patch.without && - : remove from the head + # remove from the head for i in '"$L"' y do echo $i done >victim && cat victim >del-a-expect && - git diff victim >del-a-patch.with + git diff victim >del-a-patch.with && git diff --unified=0 >del-a-patch.without && - : add to the tail + # add to the tail for i in b '"$L"' y z do echo $i @@ -63,7 +63,7 @@ test_expect_success setup ' git diff victim >add-z-patch.with && git diff --unified=0 >add-z-patch.without && - : modify at the tail + # modify at the tail for i in b '"$L"' z do echo $i @@ -72,16 +72,16 @@ test_expect_success setup ' git diff victim >mod-z-patch.with && git diff --unified=0 >mod-z-patch.without && - : remove from the tail + # remove from the tail for i in b '"$L"' do echo $i done >victim && cat victim >del-z-expect && - git diff victim >del-z-patch.with - git diff --unified=0 >del-z-patch.without && + git diff victim >del-z-patch.with && + git diff --unified=0 >del-z-patch.without - : done + # done ' for with in with without @@ -95,10 +95,7 @@ do test_expect_success "apply $kind-patch $with context" ' cat original >victim && git update-index victim && - git apply --index '"$u$kind-patch.$with"' || { - cat '"$kind-patch.$with"' - (exit 1) - } && + git apply --index '"$u$kind-patch.$with"' && test_cmp '"$kind"'-expect victim ' done @@ -113,10 +110,7 @@ do test_expect_success "apply non-git $kind-patch without context" ' cat original >victim && git update-index victim && - git apply --unidiff-zero --index '"$kind-ng.without"' || { - cat '"$kind-ng.without"' - (exit 1) - } && + git apply --unidiff-zero --index '"$kind-ng.without"' && test_cmp '"$kind"'-expect victim ' done diff --git a/t/t4117-apply-reject.sh b/t/t4117-apply-reject.sh index 8e15ecbdfd..d80187de94 100755 --- a/t/t4117-apply-reject.sh +++ b/t/t4117-apply-reject.sh @@ -56,23 +56,13 @@ test_expect_success 'apply --reject is incompatible with --3way' ' test_expect_success 'apply without --reject should fail' ' - if git apply patch.1 - then - echo "Eh? Why?" - exit 1 - fi - + test_must_fail git apply patch.1 && test_cmp file1 saved.file1 ' test_expect_success 'apply without --reject should fail' ' - if git apply --verbose patch.1 - then - echo "Eh? Why?" - exit 1 - fi - + test_must_fail git apply --verbose patch.1 && test_cmp file1 saved.file1 ' @@ -81,21 +71,11 @@ test_expect_success 'apply with --reject should fail but update the file' ' cat saved.file1 >file1 && rm -f file1.rej file2.rej && - if git apply --reject patch.1 - then - echo "succeeds with --reject?" - exit 1 - fi - + test_must_fail git apply --reject patch.1 && test_cmp file1 expected && cat file1.rej && - - if test -f file2.rej - then - echo "file2 should not have been touched" - exit 1 - fi + test_path_is_missing file2.rej ' test_expect_success 'apply with --reject should fail but update the file' ' @@ -103,25 +83,12 @@ test_expect_success 'apply with --reject should fail but update the file' ' cat saved.file1 >file1 && rm -f file1.rej file2.rej file2 && - if git apply --reject patch.2 >rejects - then - echo "succeeds with --reject?" - exit 1 - fi - - test -f file1 && { - echo "file1 still exists?" - exit 1 - } + test_must_fail git apply --reject patch.2 >rejects && + test_path_is_missing file1 && test_cmp file2 expected && cat file2.rej && - - if test -f file1.rej - then - echo "file2 should not have been touched" - exit 1 - fi + test_path_is_missing file1.rej ' @@ -130,25 +97,12 @@ test_expect_success 'the same test with --verbose' ' cat saved.file1 >file1 && rm -f file1.rej file2.rej file2 && - if git apply --reject --verbose patch.2 >rejects - then - echo "succeeds with --reject?" - exit 1 - fi - - test -f file1 && { - echo "file1 still exists?" - exit 1 - } + test_must_fail git apply --reject --verbose patch.2 >rejects && + test_path_is_missing file1 && test_cmp file2 expected && cat file2.rej && - - if test -f file1.rej - then - echo "file2 should not have been touched" - exit 1 - fi + test_path_is_missing file1.rej ' diff --git a/t/t4122-apply-symlink-inside.sh b/t/t4122-apply-symlink-inside.sh index 70b3a06e1d..4acb3f336e 100755 --- a/t/t4122-apply-symlink-inside.sh +++ b/t/t4122-apply-symlink-inside.sh @@ -3,17 +3,10 @@ test_description='apply to deeper directory without getting fooled with symlink' . ./test-lib.sh -lecho () { - for l_ - do - echo "$l_" - done -} - test_expect_success setup ' mkdir -p arch/i386/boot arch/x86_64 && - lecho 1 2 3 4 5 >arch/i386/boot/Makefile && + test_write_lines 1 2 3 4 5 >arch/i386/boot/Makefile && test_ln_s_add ../i386/boot arch/x86_64/boot && git add . && test_tick && @@ -22,7 +15,7 @@ test_expect_success setup ' rm arch/x86_64/boot && mkdir arch/x86_64/boot && - lecho 2 3 4 5 6 >arch/x86_64/boot/Makefile && + test_write_lines 2 3 4 5 6 >arch/x86_64/boot/Makefile && git add . && test_tick && git commit -a -m second && @@ -52,4 +45,110 @@ test_expect_success 'check result' ' ' +test_expect_success SYMLINKS 'do not read from beyond symbolic link' ' + git reset --hard && + mkdir -p arch/x86_64/dir && + >arch/x86_64/dir/file && + git add arch/x86_64/dir/file && + echo line >arch/x86_64/dir/file && + git diff >patch && + git reset --hard && + + mkdir arch/i386/dir && + >arch/i386/dir/file && + ln -s ../i386/dir arch/x86_64/dir && + + test_must_fail git apply patch && + test_must_fail git apply --cached patch && + test_must_fail git apply --index patch + +' + +test_expect_success SYMLINKS 'do not follow symbolic link (setup)' ' + + rm -rf arch/i386/dir arch/x86_64/dir && + git reset --hard && + ln -s ../i386/dir arch/x86_64/dir && + git add arch/x86_64/dir && + git diff HEAD >add_symlink.patch && + git reset --hard && + + mkdir arch/x86_64/dir && + >arch/x86_64/dir/file && + git add arch/x86_64/dir/file && + git diff HEAD >add_file.patch && + git diff -R HEAD >del_file.patch && + git reset --hard && + rm -fr arch/x86_64/dir && + + cat add_symlink.patch add_file.patch >patch && + cat add_symlink.patch del_file.patch >tricky_del && + + mkdir arch/i386/dir +' + +test_expect_success SYMLINKS 'do not follow symbolic link (same input)' ' + + # same input creates a confusing symbolic link + test_must_fail git apply patch 2>error-wt && + test_i18ngrep "beyond a symbolic link" error-wt && + test_path_is_missing arch/x86_64/dir && + test_path_is_missing arch/i386/dir/file && + + test_must_fail git apply --index patch 2>error-ix && + test_i18ngrep "beyond a symbolic link" error-ix && + test_path_is_missing arch/x86_64/dir && + test_path_is_missing arch/i386/dir/file && + test_must_fail git ls-files --error-unmatch arch/x86_64/dir && + test_must_fail git ls-files --error-unmatch arch/i386/dir && + + test_must_fail git apply --cached patch 2>error-ct && + test_i18ngrep "beyond a symbolic link" error-ct && + test_must_fail git ls-files --error-unmatch arch/x86_64/dir && + test_must_fail git ls-files --error-unmatch arch/i386/dir && + + >arch/i386/dir/file && + git add arch/i386/dir/file && + + test_must_fail git apply tricky_del && + test_path_is_file arch/i386/dir/file && + + test_must_fail git apply --index tricky_del && + test_path_is_file arch/i386/dir/file && + test_must_fail git ls-files --error-unmatch arch/x86_64/dir && + git ls-files --error-unmatch arch/i386/dir && + + test_must_fail git apply --cached tricky_del && + test_must_fail git ls-files --error-unmatch arch/x86_64/dir && + git ls-files --error-unmatch arch/i386/dir +' + +test_expect_success SYMLINKS 'do not follow symbolic link (existing)' ' + + # existing symbolic link + git reset --hard && + ln -s ../i386/dir arch/x86_64/dir && + git add arch/x86_64/dir && + + test_must_fail git apply add_file.patch 2>error-wt-add && + test_i18ngrep "beyond a symbolic link" error-wt-add && + test_path_is_missing arch/i386/dir/file && + + mkdir arch/i386/dir && + >arch/i386/dir/file && + test_must_fail git apply del_file.patch 2>error-wt-del && + test_i18ngrep "beyond a symbolic link" error-wt-del && + test_path_is_file arch/i386/dir/file && + rm arch/i386/dir/file && + + test_must_fail git apply --index add_file.patch 2>error-ix-add && + test_i18ngrep "beyond a symbolic link" error-ix-add && + test_path_is_missing arch/i386/dir/file && + test_must_fail git ls-files --error-unmatch arch/i386/dir && + + test_must_fail git apply --cached add_file.patch 2>error-ct-file && + test_i18ngrep "beyond a symbolic link" error-ct-file && + test_must_fail git ls-files --error-unmatch arch/i386/dir +' + test_done diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index c6474de4c8..d350065f25 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -99,9 +99,8 @@ test_expect_success 'whitespace=warn, default rule' ' test_expect_success 'whitespace=error-all, default rule' ' - apply_patch --whitespace=error-all && return 1 - test -s target && return 1 - : happy + test_must_fail apply_patch --whitespace=error-all && + ! test -s target ' diff --git a/t/t4138-apply-ws-expansion.sh b/t/t4138-apply-ws-expansion.sh new file mode 100755 index 0000000000..0ffe33fbef --- /dev/null +++ b/t/t4138-apply-ws-expansion.sh @@ -0,0 +1,121 @@ +#!/bin/sh +# +# Copyright (C) 2015 Kyle J. McKay +# + +test_description='git apply test patches with whitespace expansion.' + +. ./test-lib.sh + +test_expect_success setup ' + # + ## create test-N, patchN.patch, expect-N files + # + + # test 1 + printf "\t%s\n" 1 2 3 4 5 6 >before && + printf "\t%s\n" 1 2 3 >after && + printf "%64s\n" a b c >>after && + printf "\t%s\n" 4 5 6 >>after && + git diff --no-index before after | + sed -e "s/before/test-1/" -e "s/after/test-1/" >patch1.patch && + printf "%64s\n" 1 2 3 4 5 6 >test-1 && + printf "%64s\n" 1 2 3 a b c 4 5 6 >expect-1 && + + # test 2 + printf "\t%s\n" a b c d e f >before && + printf "\t%s\n" a b c >after && + n=10 && + x=1 && + while test $x -lt $n + do + printf "%63s%d\n" "" $x >>after + x=$(( $x + 1 )) + done && + printf "\t%s\n" d e f >>after && + git diff --no-index before after | + sed -e "s/before/test-2/" -e "s/after/test-2/" >patch2.patch && + printf "%64s\n" a b c d e f >test-2 && + printf "%64s\n" a b c >expect-2 && + x=1 && + while test $x -lt $n + do + printf "%63s%d\n" "" $x >>expect-2 + x=$(( $x + 1 )) + done && + printf "%64s\n" d e f >>expect-2 && + + # test 3 + printf "\t%s\n" a b c d e f >before && + printf "\t%s\n" a b c >after && + n=100 && + x=0 && + while test $x -lt $n + do + printf "%63s%02d\n" "" $x >>after + x=$(( $x + 1 )) + done && + printf "\t%s\n" d e f >>after && + git diff --no-index before after | + sed -e "s/before/test-3/" -e "s/after/test-3/" >patch3.patch && + printf "%64s\n" a b c d e f >test-3 && + printf "%64s\n" a b c >expect-3 && + x=0 && + while test $x -lt $n + do + printf "%63s%02d\n" "" $x >>expect-3 + x=$(( $x + 1 )) + done && + printf "%64s\n" d e f >>expect-3 && + + # test 4 + >before && + x=0 && + while test $x -lt 50 + do + printf "\t%02d\n" $x >>before + x=$(( $x + 1 )) + done && + cat before >after && + printf "%64s\n" a b c >>after && + while test $x -lt 100 + do + printf "\t%02d\n" $x >>before + printf "\t%02d\n" $x >>after + x=$(( $x + 1 )) + done && + git diff --no-index before after | + sed -e "s/before/test-4/" -e "s/after/test-4/" >patch4.patch && + >test-4 && + x=0 && + while test $x -lt 50 + do + printf "%63s%02d\n" "" $x >>test-4 + x=$(( $x + 1 )) + done && + cat test-4 >expect-4 && + printf "%64s\n" a b c >>expect-4 && + while test $x -lt 100 + do + printf "%63s%02d\n" "" $x >>test-4 + printf "%63s%02d\n" "" $x >>expect-4 + x=$(( $x + 1 )) + done && + + git config core.whitespace tab-in-indent,tabwidth=63 && + git config apply.whitespace fix + +' + +# Note that `patch` can successfully apply all patches when run +# with the --ignore-whitespace option. + +for t in 1 2 3 4 +do + test_expect_success 'apply with ws expansion (t=$t)' ' + git apply patch$t.patch && + test_cmp test-$t expect-$t + ' +done + +test_done diff --git a/t/t4139-apply-escape.sh b/t/t4139-apply-escape.sh new file mode 100755 index 0000000000..45b5660a47 --- /dev/null +++ b/t/t4139-apply-escape.sh @@ -0,0 +1,141 @@ +#!/bin/sh + +test_description='paths written by git-apply cannot escape the working tree' +. ./test-lib.sh + +# tests will try to write to ../foo, and we do not +# want them to escape the trash directory when they +# fail +test_expect_success 'bump git repo one level down' ' + mkdir inside && + mv .git inside/ && + cd inside +' + +# $1 = name of file +# $2 = current path to file (if different) +mkpatch_add () { + rm -f "${2:-$1}" && + cat <<-EOF + diff --git a/$1 b/$1 + new file mode 100644 + index 0000000..53c74cd + --- /dev/null + +++ b/$1 + @@ -0,0 +1 @@ + +evil + EOF +} + +mkpatch_del () { + echo evil >"${2:-$1}" && + cat <<-EOF + diff --git a/$1 b/$1 + deleted file mode 100644 + index 53c74cd..0000000 + --- a/$1 + +++ /dev/null + @@ -1 +0,0 @@ + -evil + EOF +} + +# $1 = name of file +# $2 = content of symlink +mkpatch_symlink () { + rm -f "$1" && + cat <<-EOF + diff --git a/$1 b/$1 + new file mode 120000 + index 0000000..$(printf "%s" "$2" | git hash-object --stdin) + --- /dev/null + +++ b/$1 + @@ -0,0 +1 @@ + +$2 + \ No newline at end of file + EOF +} + +test_expect_success 'cannot create file containing ..' ' + mkpatch_add ../foo >patch && + test_must_fail git apply patch && + test_path_is_missing ../foo +' + +test_expect_success 'can create file containing .. with --unsafe-paths' ' + mkpatch_add ../foo >patch && + git apply --unsafe-paths patch && + test_path_is_file ../foo +' + +test_expect_success 'cannot create file containing .. (index)' ' + mkpatch_add ../foo >patch && + test_must_fail git apply --index patch && + test_path_is_missing ../foo +' + +test_expect_success 'cannot create file containing .. with --unsafe-paths (index)' ' + mkpatch_add ../foo >patch && + test_must_fail git apply --index --unsafe-paths patch && + test_path_is_missing ../foo +' + +test_expect_success 'cannot delete file containing ..' ' + mkpatch_del ../foo >patch && + test_must_fail git apply patch && + test_path_is_file ../foo +' + +test_expect_success 'can delete file containing .. with --unsafe-paths' ' + mkpatch_del ../foo >patch && + git apply --unsafe-paths patch && + test_path_is_missing ../foo +' + +test_expect_success 'cannot delete file containing .. (index)' ' + mkpatch_del ../foo >patch && + test_must_fail git apply --index patch && + test_path_is_file ../foo +' + +test_expect_success SYMLINKS 'symlink escape via ..' ' + { + mkpatch_symlink tmp .. && + mkpatch_add tmp/foo ../foo + } >patch && + test_must_fail git apply patch && + test_path_is_missing tmp && + test_path_is_missing ../foo +' + +test_expect_success SYMLINKS 'symlink escape via .. (index)' ' + { + mkpatch_symlink tmp .. && + mkpatch_add tmp/foo ../foo + } >patch && + test_must_fail git apply --index patch && + test_path_is_missing tmp && + test_path_is_missing ../foo +' + +test_expect_success SYMLINKS 'symlink escape via absolute path' ' + { + mkpatch_symlink tmp "$(pwd)" && + mkpatch_add tmp/foo ../foo + } >patch && + test_must_fail git apply patch && + test_path_is_missing tmp && + test_path_is_missing ../foo +' + +test_expect_success SYMLINKS 'symlink escape via absolute path (index)' ' + { + mkpatch_symlink tmp "$(pwd)" && + mkpatch_add tmp/foo ../foo + } >patch && + test_must_fail git apply --index patch && + test_path_is_missing tmp && + test_path_is_missing ../foo +' + +test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 5edb79a058..306e6f39ac 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -85,6 +85,7 @@ test_expect_success setup ' git format-patch --stdout first >patch1 && { + echo "Message-Id: <1226501681-24923-1-git-send-email-bda@mnsspb.ru>" && echo "X-Fake-Field: Line One" && echo "X-Fake-Field: Line Two" && echo "X-Fake-Field: Line Three" && @@ -536,4 +537,26 @@ test_expect_success 'am empty-file does not infloop' ' test_i18ncmp expected actual ' +test_expect_success 'am --message-id really adds the message id' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout HEAD^ && + git am --message-id patch1.eml && + test_path_is_missing .git/rebase-apply && + git cat-file commit HEAD | tail -n1 >actual && + grep Message-Id patch1.eml >expected && + test_cmp expected actual +' + +test_expect_success 'am --message-id -s signs off after the message id' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout HEAD^ && + git am -s --message-id patch1.eml && + test_path_is_missing .git/rebase-apply && + git cat-file commit HEAD | tail -n2 | head -n1 >actual && + grep Message-Id patch1.eml >expected && + test_cmp expected actual +' + test_done diff --git a/t/t4151-am-abort.sh b/t/t4151-am-abort.sh index 1176bcccf3..8d90634ab8 100755 --- a/t/t4151-am-abort.sh +++ b/t/t4151-am-abort.sh @@ -20,7 +20,7 @@ test_expect_success setup ' echo $i >otherfile-$i && git add otherfile-$i && test_tick && - git commit -a -m $i || break + git commit -a -m $i || return 1 done && git format-patch --no-numbered initial && git checkout -b side initial && diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 99ab7ca21f..1b2e981a00 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -113,11 +113,7 @@ test_expect_success 'diff-filter=M' ' actual=$(git log --pretty="format:%s" --diff-filter=M HEAD) && expect=$(echo second) && - test "$actual" = "$expect" || { - echo Oops - echo "Actual: $actual" - false - } + verbose test "$actual" = "$expect" ' @@ -125,11 +121,7 @@ test_expect_success 'diff-filter=D' ' actual=$(git log --pretty="format:%s" --diff-filter=D HEAD) && expect=$(echo sixth ; echo third) && - test "$actual" = "$expect" || { - echo Oops - echo "Actual: $actual" - false - } + verbose test "$actual" = "$expect" ' @@ -137,11 +129,7 @@ test_expect_success 'diff-filter=R' ' actual=$(git log -M --pretty="format:%s" --diff-filter=R HEAD) && expect=$(echo third) && - test "$actual" = "$expect" || { - echo Oops - echo "Actual: $actual" - false - } + verbose test "$actual" = "$expect" ' @@ -149,11 +137,7 @@ test_expect_success 'diff-filter=C' ' actual=$(git log -C -C --pretty="format:%s" --diff-filter=C HEAD) && expect=$(echo fourth) && - test "$actual" = "$expect" || { - echo Oops - echo "Actual: $actual" - false - } + verbose test "$actual" = "$expect" ' @@ -161,11 +145,7 @@ test_expect_success 'git log --follow' ' actual=$(git log --follow --pretty="format:%s" ichi) && expect=$(echo third ; echo second ; echo initial) && - test "$actual" = "$expect" || { - echo Oops - echo "Actual: $actual" - false - } + verbose test "$actual" = "$expect" ' @@ -212,6 +192,21 @@ test_expect_success 'log --grep' ' test_cmp expect actual ' +cat > expect << EOF +second +initial +EOF +test_expect_success 'log --invert-grep --grep' ' + git log --pretty="tformat:%s" --invert-grep --grep=th --grep=Sec >actual && + test_cmp expect actual +' + +test_expect_success 'log --invert-grep --grep -i' ' + echo initial >expect && + git log --pretty="tformat:%s" --invert-grep -i --grep=th --grep=Sec >actual && + test_cmp expect actual +' + test_expect_success 'log --grep option parsing' ' echo second >expect && git log -1 --pretty="tformat:%s" --grep sec >actual && @@ -466,7 +461,7 @@ test_expect_success 'log.decorate configuration' ' git log --oneline --no-decorate >actual && test_cmp expect.none actual && git log --oneline --decorate >actual && - test_cmp expect.short actual + test_cmp expect.short actual && test_unconfig log.decorate && git log --pretty=raw >expect.raw && @@ -872,4 +867,8 @@ test_expect_success GPG 'log --graph --show-signature for merged tag' ' grep "^| | gpg: Good signature" actual ' +test_expect_success 'log --graph --no-walk is forbidden' ' + test_must_fail git log --graph --no-walk +' + test_done diff --git a/t/t4207-log-decoration-colors.sh b/t/t4207-log-decoration-colors.sh index 925f577a3c..f8008b6a3d 100755 --- a/t/t4207-log-decoration-colors.sh +++ b/t/t4207-log-decoration-colors.sh @@ -44,15 +44,15 @@ test_expect_success setup ' ' cat >expected <<EOF -${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_HEAD}HEAD${c_reset}${c_commit},\ - ${c_tag}tag: v1.0${c_reset}${c_commit},\ - ${c_tag}tag: B${c_reset}${c_commit},\ - ${c_branch}master${c_reset}${c_commit})${c_reset} B -${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_tag}tag: A1${c_reset}${c_commit},\ - ${c_remoteBranch}other/master${c_reset}${c_commit})${c_reset} A1 -${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_stash}refs/stash${c_reset}${c_commit})${c_reset}\ +${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_HEAD}HEAD${c_reset}${c_commit} ->\ + ${c_reset}${c_branch}master${c_reset}${c_commit},\ + ${c_reset}${c_tag}tag: v1.0${c_reset}${c_commit},\ + ${c_reset}${c_tag}tag: B${c_reset}${c_commit})${c_reset} B +${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_tag}tag: A1${c_reset}${c_commit},\ + ${c_reset}${c_remoteBranch}other/master${c_reset}${c_commit})${c_reset} A1 +${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_stash}refs/stash${c_reset}${c_commit})${c_reset}\ On master: Changes to A.t -${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_tag}tag: A${c_reset}${c_commit})${c_reset} A +${c_commit}COMMIT_ID${c_reset}${c_commit} (${c_reset}${c_tag}tag: A${c_reset}${c_commit})${c_reset} A EOF # We want log to show all, but the second parent to refs/stash is irrelevant diff --git a/t/t4211-line-log.sh b/t/t4211-line-log.sh index 0901b30982..4451127eb2 100755 --- a/t/t4211-line-log.sh +++ b/t/t4211-line-log.sh @@ -54,14 +54,14 @@ canned_test "-L 4:a.c -L 8,12:a.c simple" multiple-superset canned_test "-L 8,12:a.c -L 4:a.c simple" multiple-superset test_bad_opts "-L" "switch.*requires a value" -test_bad_opts "-L b.c" "argument.*not of the form" -test_bad_opts "-L 1:" "argument.*not of the form" +test_bad_opts "-L b.c" "argument not .start,end:file" +test_bad_opts "-L 1:" "argument not .start,end:file" test_bad_opts "-L 1:nonexistent" "There is no path" test_bad_opts "-L 1:simple" "There is no path" -test_bad_opts "-L '/foo:b.c'" "argument.*not of the form" +test_bad_opts "-L '/foo:b.c'" "argument not .start,end:file" test_bad_opts "-L 1000:b.c" "has only.*lines" test_bad_opts "-L 1,1000:b.c" "has only.*lines" -test_bad_opts "-L :b.c" "argument.*not of the form" +test_bad_opts "-L :b.c" "argument not .start,end:file" test_bad_opts "-L :foo:b.c" "no match" test_expect_success '-L X (X == nlines)' ' diff --git a/t/t4212-log-corrupt.sh b/t/t4212-log-corrupt.sh index 67bd8ec020..22aa8b7c0e 100755 --- a/t/t4212-log-corrupt.sh +++ b/t/t4212-log-corrupt.sh @@ -61,7 +61,7 @@ test_expect_success 'unparsable dates produce sentinel value' ' test_expect_success 'unparsable dates produce sentinel value (%ad)' ' commit=$(munge_author_date HEAD totally_bogus) && echo >expect && - git log -1 --format=%ad $commit >actual + git log -1 --format=%ad $commit >actual && test_cmp expect actual ' diff --git a/t/t4255-am-submodule.sh b/t/t4255-am-submodule.sh index 8bde7dbb6d..0ba8194403 100755 --- a/t/t4255-am-submodule.sh +++ b/t/t4255-am-submodule.sh @@ -18,4 +18,76 @@ am_3way () { KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 test_submodule_switch "am_3way" +test_expect_success 'setup diff.submodule' ' + test_commit one && + INITIAL=$(git rev-parse HEAD) && + + git init submodule && + ( + cd submodule && + test_commit two && + git rev-parse HEAD >../initial-submodule + ) && + git submodule add ./submodule && + git commit -m first && + + ( + cd submodule && + test_commit three && + git rev-parse HEAD >../first-submodule + ) && + git add submodule && + git commit -m second && + SECOND=$(git rev-parse HEAD) && + + ( + cd submodule && + git mv two.t four.t && + git commit -m "second submodule" && + git rev-parse HEAD >../second-submodule + ) && + test_commit four && + git add submodule && + git commit --amend --no-edit && + THIRD=$(git rev-parse HEAD) && + git submodule update --init +' + +run_test() { + START_COMMIT=$1 && + EXPECT=$2 && + # Abort any merges in progress: the previous + # test may have failed, and we should clean up. + test_might_fail git am --abort && + git reset --hard $START_COMMIT && + rm -f *.patch && + git format-patch -1 && + git reset --hard $START_COMMIT^ && + git submodule update && + git am *.patch && + git submodule update && + git -C submodule rev-parse HEAD >actual && + test_cmp $EXPECT actual +} + +test_expect_success 'diff.submodule unset' ' + test_unconfig diff.submodule && + run_test $SECOND first-submodule +' + +test_expect_success 'diff.submodule unset with extra file' ' + test_unconfig diff.submodule && + run_test $THIRD second-submodule +' + +test_expect_success 'diff.submodule=log' ' + test_config diff.submodule log && + run_test $SECOND first-submodule +' + +test_expect_success 'diff.submodule=log with extra file' ' + test_config diff.submodule log && + run_test $THIRD second-submodule +' + test_done diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index d01bbdc968..4b68bbafbe 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -101,7 +101,7 @@ test_expect_success \ ten=0123456789 && hundred=$ten$ten$ten$ten$ten$ten$ten$ten$ten$ten && echo long filename >a/four$hundred && mkdir a/bin && - cp /bin/sh a/bin && + test-genrandom "frotz" 500000 >a/bin/sh && printf "A\$Format:%s\$O" "$SUBSTFORMAT" >a/substfile1 && printf "A not substituted O" >a/substfile2 && if test_have_prereq SYMLINKS; then diff --git a/t/t5003-archive-zip.sh b/t/t5003-archive-zip.sh index c929db5633..14744b2a4b 100755 --- a/t/t5003-archive-zip.sh +++ b/t/t5003-archive-zip.sh @@ -33,6 +33,37 @@ check_zip() { test_expect_success UNZIP " validate file contents" " diff -r a ${dir_with_prefix}a " + + dir=eol_$1 + dir_with_prefix=$dir/$2 + extracted=${dir_with_prefix}a + original=a + + test_expect_success UNZIP " extract ZIP archive with EOL conversion" ' + (mkdir $dir && cd $dir && "$GIT_UNZIP" -a ../$zipfile) + ' + + test_expect_success UNZIP " validate that text files are converted" " + test_cmp_bin $extracted/text.cr $extracted/text.crlf && + test_cmp_bin $extracted/text.cr $extracted/text.lf + " + + test_expect_success UNZIP " validate that binary files are unchanged" " + test_cmp_bin $original/binary.cr $extracted/binary.cr && + test_cmp_bin $original/binary.crlf $extracted/binary.crlf && + test_cmp_bin $original/binary.lf $extracted/binary.lf + " + + test_expect_success UNZIP " validate that diff files are converted" " + test_cmp_bin $extracted/diff.cr $extracted/diff.crlf && + test_cmp_bin $extracted/diff.cr $extracted/diff.lf + " + + test_expect_success UNZIP " validate that -diff files are unchanged" " + test_cmp_bin $original/nodiff.cr $extracted/nodiff.cr && + test_cmp_bin $original/nodiff.crlf $extracted/nodiff.crlf && + test_cmp_bin $original/nodiff.lf $extracted/nodiff.lf + " } test_expect_success \ @@ -41,6 +72,18 @@ test_expect_success \ echo simple textfile >a/a && mkdir a/bin && cp /bin/sh a/bin && + printf "text\r" >a/text.cr && + printf "text\r\n" >a/text.crlf && + printf "text\n" >a/text.lf && + printf "text\r" >a/nodiff.cr && + printf "text\r\n" >a/nodiff.crlf && + printf "text\n" >a/nodiff.lf && + printf "\0\r" >a/binary.cr && + printf "\0\r\n" >a/binary.crlf && + printf "\0\n" >a/binary.lf && + printf "\0\r" >a/diff.cr && + printf "\0\r\n" >a/diff.crlf && + printf "\0\n" >a/diff.lf && printf "A\$Format:%s\$O" "$SUBSTFORMAT" >a/substfile1 && printf "A not substituted O" >a/substfile2 && (p=long_path_to_a_file && cd a && @@ -66,7 +109,9 @@ test_expect_success 'add files to repository' ' GIT_COMMITTER_DATE="2005-05-27 22:00" git commit -m initial ' -test_expect_success 'setup export-subst' ' +test_expect_success 'setup export-subst and diff attributes' ' + echo "a/nodiff.* -diff" >>.git/info/attributes && + echo "a/diff.* diff" >>.git/info/attributes && echo "substfile?" export-subst >>.git/info/attributes && git log --max-count=1 "--pretty=format:A${SUBSTFORMAT}O" HEAD \ >a/substfile1 diff --git a/t/t5004-archive-corner-cases.sh b/t/t5004-archive-corner-cases.sh index 305bcac6b7..654addaae3 100755 --- a/t/t5004-archive-corner-cases.sh +++ b/t/t5004-archive-corner-cases.sh @@ -66,8 +66,10 @@ test_expect_success UNZIP 'zip archive of empty tree is empty' ' # handle the empty repo at all, making our later check of its exit code # a no-op). But we cannot do anything reasonable except skip the test # on such platforms anyway, and this is the moral equivalent. - "$GIT_UNZIP" "$TEST_DIRECTORY"/t5004/empty.zip - expect_code=$? + { + "$GIT_UNZIP" "$TEST_DIRECTORY"/t5004/empty.zip + expect_code=$? + } && git archive --format=zip HEAD >empty.zip && make_dir extract && diff --git a/t/t5100-mailinfo.sh b/t/t5100-mailinfo.sh index 9e1ad1ca21..e97cfb2ab8 100755 --- a/t/t5100-mailinfo.sh +++ b/t/t5100-mailinfo.sh @@ -34,6 +34,10 @@ do if test -f "$TEST_DIRECTORY"/t5100/msg$mail--no-inbody-headers then check_mailinfo $mail --no-inbody-headers + fi && + if test -f "$TEST_DIRECTORY"/t5100/msg$mail--message-id + then + check_mailinfo $mail --message-id fi ' done diff --git a/t/t5100/info0012--message-id b/t/t5100/info0012--message-id new file mode 100644 index 0000000000..ac1216ff75 --- /dev/null +++ b/t/t5100/info0012--message-id @@ -0,0 +1,5 @@ +Author: Dmitriy Blinov +Email: bda@mnsspb.ru +Subject: Изменён список пакетов необходимых для сборки +Date: Wed, 12 Nov 2008 17:54:41 +0300 + diff --git a/t/t5100/msg0012--message-id b/t/t5100/msg0012--message-id new file mode 100644 index 0000000000..376e26e9ae --- /dev/null +++ b/t/t5100/msg0012--message-id @@ -0,0 +1,8 @@ +textlive-* исправлены на texlive-* +docutils заменён на python-docutils + +Действительно, оказалось, что rest2web вытягивает за собой +python-docutils. В то время как сам rest2web не нужен. + +Signed-off-by: Dmitriy Blinov <bda@mnsspb.ru> +Message-Id: <1226501681-24923-1-git-send-email-bda@mnsspb.ru> diff --git a/t/t5100/patch0012--message-id b/t/t5100/patch0012--message-id new file mode 100644 index 0000000000..36a0b68161 --- /dev/null +++ b/t/t5100/patch0012--message-id @@ -0,0 +1,30 @@ +--- + howto/build_navy.txt | 6 +++--- + 1 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/howto/build_navy.txt b/howto/build_navy.txt +index 3fd3afb..0ee807e 100644 +--- a/howto/build_navy.txt ++++ b/howto/build_navy.txt +@@ -119,8 +119,8 @@ + - libxv-dev + - libusplash-dev + - latex-make +- - textlive-lang-cyrillic +- - textlive-latex-extra ++ - texlive-lang-cyrillic ++ - texlive-latex-extra + - dia + - python-pyrex + - libtool +@@ -128,7 +128,7 @@ + - sox + - cython + - imagemagick +- - docutils ++ - python-docutils + + #. на машине dinar: добавить свой открытый ssh-ключ в authorized_keys2 пользователя ddev + #. на своей машине: отредактировать /etc/sudoers (команда ``visudo``) примерно следующим образом:: +-- +1.5.6.5 diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index e32e46dee1..0794d33dad 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -253,4 +253,12 @@ test_expect_success 'prune .git/shallow' ' test_path_is_missing .git/shallow ' +test_expect_success 'prune: handle alternate object database' ' + test_create_repo A && + git -C A commit --allow-empty -m "initial commit" && + git clone --shared A B && + git -C B commit --allow-empty -m "next commit" && + git -C B prune +' + test_done diff --git a/t/t5312-prune-corruption.sh b/t/t5312-prune-corruption.sh new file mode 100755 index 0000000000..8e98b44083 --- /dev/null +++ b/t/t5312-prune-corruption.sh @@ -0,0 +1,114 @@ +#!/bin/sh + +test_description=' +Test pruning of repositories with minor corruptions. The goal +here is that we should always be erring on the side of safety. So +if we see, for example, a ref with a bogus name, it is OK either to +bail out or to proceed using it as a reachable tip, but it is _not_ +OK to proceed as if it did not exist. Otherwise we might silently +delete objects that cannot be recovered. +' +. ./test-lib.sh + +test_expect_success 'disable reflogs' ' + git config core.logallrefupdates false && + rm -rf .git/logs +' + +test_expect_success 'create history reachable only from a bogus-named ref' ' + test_tick && git commit --allow-empty -m master && + base=$(git rev-parse HEAD) && + test_tick && git commit --allow-empty -m bogus && + bogus=$(git rev-parse HEAD) && + git cat-file commit $bogus >saved && + echo $bogus >.git/refs/heads/bogus..name && + git reset --hard HEAD^ +' + +test_expect_success 'pruning does not drop bogus object' ' + test_when_finished "git hash-object -w -t commit saved" && + test_might_fail git prune --expire=now && + verbose git cat-file -e $bogus +' + +test_expect_success 'put bogus object into pack' ' + git tag reachable $bogus && + git repack -ad && + git tag -d reachable && + verbose git cat-file -e $bogus +' + +test_expect_success 'destructive repack keeps packed object' ' + test_might_fail git repack -Ad --unpack-unreachable=now && + verbose git cat-file -e $bogus && + test_might_fail git repack -ad && + verbose git cat-file -e $bogus +' + +# subsequent tests will have different corruptions +test_expect_success 'clean up bogus ref' ' + rm .git/refs/heads/bogus..name +' + +# We create two new objects here, "one" and "two". Our +# master branch points to "two", which is deleted, +# corrupting the repository. But we'd like to make sure +# that the otherwise unreachable "one" is not pruned +# (since it is the user's best bet for recovering +# from the corruption). +# +# Note that we also point HEAD somewhere besides "two", +# as we want to make sure we test the case where we +# pick up the reference to "two" by iterating the refs, +# not by resolving HEAD. +test_expect_success 'create history with missing tip commit' ' + test_tick && git commit --allow-empty -m one && + recoverable=$(git rev-parse HEAD) && + git cat-file commit $recoverable >saved && + test_tick && git commit --allow-empty -m two && + missing=$(git rev-parse HEAD) && + git checkout --detach $base && + rm .git/objects/$(echo $missing | sed "s,..,&/,") && + test_must_fail git cat-file -e $missing +' + +test_expect_success 'pruning with a corrupted tip does not drop history' ' + test_when_finished "git hash-object -w -t commit saved" && + test_might_fail git prune --expire=now && + verbose git cat-file -e $recoverable +' + +test_expect_success 'pack-refs does not silently delete broken loose ref' ' + git pack-refs --all --prune && + echo $missing >expect && + git rev-parse refs/heads/master >actual && + test_cmp expect actual +' + +# we do not want to count on running pack-refs to +# actually pack it, as it is perfectly reasonable to +# skip processing a broken ref +test_expect_success 'create packed-refs file with broken ref' ' + rm -f .git/refs/heads/master && + cat >.git/packed-refs <<-EOF && + $missing refs/heads/master + $recoverable refs/heads/other + EOF + echo $missing >expect && + git rev-parse refs/heads/master >actual && + test_cmp expect actual +' + +test_expect_success 'pack-refs does not silently delete broken packed ref' ' + git pack-refs --all --prune && + git rev-parse refs/heads/master >actual && + test_cmp expect actual +' + +test_expect_success 'pack-refs does not drop broken refs during deletion' ' + git update-ref -d refs/heads/other && + git rev-parse refs/heads/master >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index 0736bcbcd5..04cea97f87 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -76,8 +76,7 @@ test_expect_success 'refuse pushing rewound head without --force' ' test "$victim_head" = "$pushed_head" ' -test_expect_success \ - 'push can be used to delete a ref' ' +test_expect_success 'push can be used to delete a ref' ' ( cd victim && git branch extra master ) && git send-pack ./victim :extra master && ( cd victim && @@ -196,19 +195,6 @@ rewound_push_setup() { ) } -rewound_push_succeeded() { - cmp ../parent/.git/refs/heads/master .git/refs/heads/master -} - -rewound_push_failed() { - if rewound_push_succeeded - then - false - else - true - fi -} - test_expect_success 'pushing explicit refspecs respects forcing' ' rewound_push_setup && parent_orig=$(cd parent && git rev-parse --verify master) && diff --git a/t/t5407-post-rewrite-hook.sh b/t/t5407-post-rewrite-hook.sh index ea2e0d4b48..7a48236e87 100755 --- a/t/t5407-post-rewrite-hook.sh +++ b/t/t5407-post-rewrite-hook.sh @@ -61,10 +61,10 @@ test_expect_success 'git rebase' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD^) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -77,9 +77,9 @@ test_expect_success 'git rebase --skip' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -89,9 +89,9 @@ test_expect_success 'git rebase --skip the last one' ' test_must_fail git rebase --onto D A && git rebase --skip && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse E) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse E) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -103,10 +103,10 @@ test_expect_success 'git rebase -m' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD^) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -119,9 +119,9 @@ test_expect_success 'git rebase -m --skip' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -148,10 +148,10 @@ test_expect_success 'git rebase -i (unchanged)' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD^) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -163,9 +163,9 @@ test_expect_success 'git rebase -i (skip)' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -177,10 +177,10 @@ test_expect_success 'git rebase -i (squash)' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -189,10 +189,10 @@ test_expect_success 'git rebase -i (fixup without conflict)' ' clear_hook_input && FAKE_LINES="1 fixup 2" git rebase -i B && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -205,10 +205,27 @@ test_expect_success 'git rebase -i (double edit)' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD^) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF + verify_hook_input +' + +test_expect_success 'git rebase -i (exec)' ' + git reset --hard D && + clear_hook_input && + FAKE_LINES="edit 1 exec_false 2" git rebase -i B && + echo something >bar && + git add bar && + # Fails because of exec false + test_must_fail git rebase --continue && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 5b2b1c2c13..3a9b77576f 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -414,7 +414,7 @@ test_expect_success 'setup tests for the --stdin parameter' ' do git tag $head $head done && - cat >input <<-\EOF + cat >input <<-\EOF && refs/heads/C refs/heads/A refs/heads/D @@ -541,13 +541,30 @@ check_prot_path () { test_cmp expected actual } -check_prot_host_path () { - cat >expected <<-EOF && +check_prot_host_port_path () { + local diagport + case "$2" in + *ssh*) + pp=ssh + uah=userandhost + ehost=$(echo $3 | tr -d "[]") + diagport="Diag: port=$4" + ;; + *) + pp=$p + uah=hostandport + ehost=$(echo $3$4 | sed -e "s/22$/:22/" -e "s/NONE//") + diagport="" + ;; + esac + cat >exp <<-EOF && Diag: url=$1 - Diag: protocol=$2 - Diag: hostandport=$3 - Diag: path=$4 + Diag: protocol=$pp + Diag: $uah=$ehost + $diagport + Diag: path=$5 EOF + grep -v "^$" exp >expected git fetch-pack --diag-url "$1" >actual && test_cmp expected actual } @@ -557,22 +574,23 @@ do # git or ssh with scheme for p in "ssh+git" "git+ssh" git ssh do - for h in host host:12 [::1] [::1]:23 + for h in host user@host user@[::1] user@::1 do - case "$p" in - *ssh*) - pp=ssh - ;; - *) - pp=$p - ;; - esac - test_expect_success "fetch-pack --diag-url $p://$h/$r" ' - check_prot_host_path $p://$h/$r $pp "$h" "/$r" - ' - # "/~" -> "~" conversion - test_expect_success "fetch-pack --diag-url $p://$h/~$r" ' - check_prot_host_path $p://$h/~$r $pp "$h" "~$r" + for c in "" : + do + test_expect_success "fetch-pack --diag-url $p://$h$c/$r" ' + check_prot_host_port_path $p://$h/$r $p "$h" NONE "/$r" + ' + # "/~" -> "~" conversion + test_expect_success "fetch-pack --diag-url $p://$h$c/~$r" ' + check_prot_host_port_path $p://$h/~$r $p "$h" NONE "~$r" + ' + done + done + for h in host User@host User@[::1] + do + test_expect_success "fetch-pack --diag-url $p://$h:22/$r" ' + check_prot_host_port_path $p://$h:22/$r $p "$h" 22 "/$r" ' done done @@ -603,11 +621,11 @@ do for h in host [::1] do test_expect_success "fetch-pack --diag-url $h:$r" ' - check_prot_path $h:$r $p "$r" + check_prot_host_port_path $h:$r $p "$h" NONE "$r" ' # Do "/~" -> "~" conversion test_expect_success "fetch-pack --diag-url $h:/~$r" ' - check_prot_host_path $h:/~$r $p "$h" "~$r" + check_prot_host_port_path $h:/~$r $p "$h" NONE "~$r" ' done done diff --git a/t/t5503-tagfollow.sh b/t/t5503-tagfollow.sh index f30c03885c..4ca48f0276 100755 --- a/t/t5503-tagfollow.sh +++ b/t/t5503-tagfollow.sh @@ -139,8 +139,8 @@ EOF ' test_expect_success 'new clone fetch master and tags' ' - git branch -D cat - rm -f $U + test_might_fail git branch -D cat && + rm -f $U && ( mkdir clone2 && cd clone2 && diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index ac79dd915d..7a8499ce66 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -579,7 +579,7 @@ test_expect_success 'update with arguments' ' cd one && for b in $(git branch -r) do - git branch -r -d $b || break + git branch -r -d $b || exit 1 done && git remote add manduca ../mirror && git remote add megaloprepus ../mirror && @@ -622,7 +622,7 @@ test_expect_success 'update default' ' cd one && for b in $(git branch -r) do - git branch -r -d $b || break + git branch -r -d $b || exit 1 done && git config remote.drosophila.skipDefaultUpdate true && git remote update default && @@ -642,7 +642,7 @@ test_expect_success 'update default (overridden, with funny whitespace)' ' cd one && for b in $(git branch -r) do - git branch -r -d $b || break + git branch -r -d $b || exit 1 done && git config remotes.default "$(printf "\t drosophila \n")" && git remote update default && @@ -656,7 +656,7 @@ test_expect_success 'update (with remotes.default defined)' ' cd one && for b in $(git branch -r) do - git branch -r -d $b || break + git branch -r -d $b || exit 1 done && git config remotes.default "drosophila" && git remote update && @@ -1113,4 +1113,9 @@ test_extra_arg set-url origin newurl oldurl # prune takes any number of args # update takes any number of args +test_expect_success 'add remote matching the "insteadOf" URL' ' + git config url.xyz@example.com.insteadOf backup && + git remote add backup xyz@example.com +' + test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index d78f3201f4..0ba9db0884 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -124,7 +124,7 @@ test_expect_success 'fetch --prune handles overlapping refspecs' ' git rev-parse origin/master && git rev-parse origin/pr/42 && - git config --unset-all remote.origin.fetch + git config --unset-all remote.origin.fetch && git config remote.origin.fetch refs/pull/*/head:refs/remotes/origin/pr/* && git config --add remote.origin.fetch refs/heads/*:refs/remotes/origin/* && @@ -596,7 +596,7 @@ test_configured_prune () { test_unconfig remote.origin.prune && git fetch && git rev-parse --verify refs/remotes/origin/newbranch - ) + ) && # now remove it git branch -d newbranch && diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 321c3e5234..3bd9759e0f 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -103,8 +103,10 @@ test_expect_success 'confuses pattern as remote when no remote specified' ' ' test_expect_success 'die with non-2 for wrong repository even with --exit-code' ' - git ls-remote --exit-code ./no-such-repository ;# not && - status=$? && + { + git ls-remote --exit-code ./no-such-repository + status=$? + } && test $status != 2 && test $status != 0 ' diff --git a/t/t5514-fetch-multiple.sh b/t/t5514-fetch-multiple.sh index 0f8140957f..4b4b6673b8 100755 --- a/t/t5514-fetch-multiple.sh +++ b/t/t5514-fetch-multiple.sh @@ -120,7 +120,7 @@ test_expect_success 'git fetch --all (skipFetchAll)' ' (cd test4 && for b in $(git branch -r) do - git branch -r -d $b || break + git branch -r -d $b || exit 1 done && git remote add three ../three && git config remote.three.skipFetchAll true && @@ -144,7 +144,7 @@ test_expect_success 'git fetch --multiple (ignoring skipFetchAll)' ' (cd test4 && for b in $(git branch -r) do - git branch -r -d $b || break + git branch -r -d $b || exit 1 done && git fetch --multiple one two three && git branch -r > output && diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index f4da20aa9b..8a5f2363a9 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -238,7 +238,7 @@ test_expect_success 'push with pushInsteadOf' ' test_expect_success 'push with pushInsteadOf and explicit pushurl (pushInsteadOf should not rewrite)' ' mk_empty testrepo && test_config "url.trash2/.pushInsteadOf" testrepo/ && - test_config "url.trash3/.pusnInsteadOf" trash/wrong && + test_config "url.trash3/.pushInsteadOf" trash/wrong && test_config remote.r.url trash/wrong && test_config remote.r.pushurl "testrepo/" && git push r refs/heads/master:refs/remotes/origin/master && @@ -1107,9 +1107,16 @@ test_expect_success 'fetch exact SHA1' ' git config uploadpack.allowtipsha1inwant true ) && - git fetch -v ../testrepo $the_commit:refs/heads/copy && - result=$(git rev-parse --verify refs/heads/copy) && - test "$the_commit" = "$result" + git fetch -v ../testrepo $the_commit:refs/heads/copy master:refs/heads/extra && + cat >expect <<-EOF && + $the_commit + $the_first_commit + EOF + { + git rev-parse --verify refs/heads/copy && + git rev-parse --verify refs/heads/extra + } >actual && + test_cmp expect actual ) ' @@ -1330,4 +1337,224 @@ test_expect_success 'fetch into bare respects core.logallrefupdates' ' ) ' +test_expect_success 'receive.denyCurrentBranch = updateInstead' ' + git push testrepo master && + ( + cd testrepo && + git reset --hard && + git config receive.denyCurrentBranch updateInstead + ) && + test_commit third path2 && + + # Try pushing into a repository with pristine working tree + git push testrepo master && + ( + cd testrepo && + git update-index -q --refresh && + git diff-files --quiet -- && + git diff-index --quiet --cached HEAD -- && + test third = "$(cat path2)" && + test $(git -C .. rev-parse HEAD) = $(git rev-parse HEAD) + ) && + + # Try pushing into a repository with working tree needing a refresh + ( + cd testrepo && + git reset --hard HEAD^ && + test $(git -C .. rev-parse HEAD^) = $(git rev-parse HEAD) && + test-chmtime +100 path1 + ) && + git push testrepo master && + ( + cd testrepo && + git update-index -q --refresh && + git diff-files --quiet -- && + git diff-index --quiet --cached HEAD -- && + test_cmp ../path1 path1 && + test third = "$(cat path2)" && + test $(git -C .. rev-parse HEAD) = $(git rev-parse HEAD) + ) && + + # Update what is to be pushed + test_commit fourth path2 && + + # Try pushing into a repository with a dirty working tree + # (1) the working tree updated + ( + cd testrepo && + echo changed >path1 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git -C .. rev-parse HEAD^) = $(git rev-parse HEAD) && + git diff --quiet --cached && + test changed = "$(cat path1)" + ) && + + # (2) the index updated + ( + cd testrepo && + echo changed >path1 && + git add path1 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git -C .. rev-parse HEAD^) = $(git rev-parse HEAD) && + git diff --quiet && + test changed = "$(cat path1)" + ) && + + # Introduce a new file in the update + test_commit fifth path3 && + + # (3) the working tree has an untracked file that would interfere + ( + cd testrepo && + git reset --hard && + echo changed >path3 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git -C .. rev-parse HEAD^^) = $(git rev-parse HEAD) && + git diff --quiet && + git diff --quiet --cached && + test changed = "$(cat path3)" + ) && + + # (4) the target changes to what gets pushed but it still is a change + ( + cd testrepo && + git reset --hard && + echo fifth >path3 && + git add path3 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git -C .. rev-parse HEAD^^) = $(git rev-parse HEAD) && + git diff --quiet && + test fifth = "$(cat path3)" + ) && + + # (5) push into void + rm -fr void && + git init void && + ( + cd void && + git config receive.denyCurrentBranch updateInstead + ) && + git push void master && + ( + cd void && + test $(git -C .. rev-parse master) = $(git rev-parse HEAD) && + git diff --quiet && + git diff --cached --quiet + ) +' + +test_expect_success 'updateInstead with push-to-checkout hook' ' + rm -fr testrepo && + git init testrepo && + ( + cd testrepo && + git pull .. master && + git reset --hard HEAD^^ && + git tag initial && + git config receive.denyCurrentBranch updateInstead && + write_script .git/hooks/push-to-checkout <<-\EOF + echo >&2 updating from $(git rev-parse HEAD) + echo >&2 updating to "$1" + + git update-index -q --refresh && + git read-tree -u -m HEAD "$1" || { + status=$? + echo >&2 read-tree failed + exit $status + } + EOF + ) && + + # Try pushing into a pristine + git push testrepo master && + ( + cd testrepo && + git diff --quiet && + git diff HEAD --quiet && + test $(git -C .. rev-parse HEAD) = $(git rev-parse HEAD) + ) && + + # Try pushing into a repository with conflicting change + ( + cd testrepo && + git reset --hard initial && + echo conflicting >path2 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git rev-parse initial) = $(git rev-parse HEAD) && + test conflicting = "$(cat path2)" && + git diff-index --quiet --cached HEAD + ) && + + # Try pushing into a repository with unrelated change + ( + cd testrepo && + git reset --hard initial && + echo unrelated >path1 && + echo irrelevant >path5 && + git add path5 + ) && + git push testrepo master && + ( + cd testrepo && + test "$(cat path1)" = unrelated && + test "$(cat path5)" = irrelevant && + test "$(git diff --name-only --cached HEAD)" = path5 && + test $(git -C .. rev-parse HEAD) = $(git rev-parse HEAD) + ) && + + # push into void + rm -fr void && + git init void && + ( + cd void && + git config receive.denyCurrentBranch updateInstead && + write_script .git/hooks/push-to-checkout <<-\EOF + if git rev-parse --quiet --verify HEAD + then + has_head=yes + echo >&2 updating from $(git rev-parse HEAD) + else + has_head=no + echo >&2 pushing into void + fi + echo >&2 updating to "$1" + + git update-index -q --refresh && + case "$has_head" in + yes) + git read-tree -u -m HEAD "$1" ;; + no) + git read-tree -u -m "$1" ;; + esac || { + status=$? + echo >&2 read-tree failed + exit $status + } + EOF + ) && + + git push void master && + ( + cd void && + git diff --quiet && + git diff --cached --quiet && + test $(git -C .. rev-parse HEAD) = $(git rev-parse HEAD) + ) +' + test_done diff --git a/t/t5524-pull-msg.sh b/t/t5524-pull-msg.sh index 8cccecc2fc..c278adaa5a 100755 --- a/t/t5524-pull-msg.sh +++ b/t/t5524-pull-msg.sh @@ -17,6 +17,9 @@ test_expect_success setup ' git commit -m "add bfile" ) && test_tick && test_tick && + echo "second" >afile && + git add afile && + git commit -m "second commit" && echo "original $dollar" >afile && git add afile && git commit -m "do not clobber $dollar signs" @@ -32,4 +35,18 @@ test_expect_success pull ' ) ' +test_expect_success '--log=1 limits shortlog length' ' +( + cd cloned && + git reset --hard HEAD^ && + test "$(cat afile)" = original && + test "$(cat bfile)" = added && + git pull --log=1 && + git log -3 && + git cat-file commit HEAD >result && + grep Dollar result && + ! grep "second commit" result +) +' + test_done diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index ca5b027c55..a4532b00d6 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -216,7 +216,7 @@ test_expect_success "Recursion stops when no new submodule commits are fetched" head2=$(git rev-parse --short HEAD) && echo "Fetching submodule submodule" > expect.out.sub && echo "From $pwd/." > expect.err.sub && - echo " $head1..$head2 master -> origin/master" >> expect.err.sub + echo " $head1..$head2 master -> origin/master" >>expect.err.sub && head -2 expect.err >> expect.err.sub && ( cd downstream && @@ -315,7 +315,7 @@ test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no ne ) && head1=$(git rev-parse --short HEAD^) && git add subdir/deepsubmodule && - git commit -m "new deepsubmodule" + git commit -m "new deepsubmodule" && head2=$(git rev-parse --short HEAD) && echo "From $pwd/submodule" > ../expect.err.sub && echo " $head1..$head2 master -> origin/master" >> ../expect.err.sub @@ -337,7 +337,7 @@ test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necess head2=$(git rev-parse --short HEAD) && tail -2 expect.err > expect.err.deepsub && echo "From $pwd/." > expect.err && - echo " $head1..$head2 master -> origin/master" >> expect.err + echo " $head1..$head2 master -> origin/master" >>expect.err && cat expect.err.sub >> expect.err && cat expect.err.deepsub >> expect.err && ( @@ -387,7 +387,7 @@ test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config git commit -m "new submodule" && head2=$(git rev-parse --short HEAD) && echo "From $pwd/." > expect.err.2 && - echo " $head1..$head2 master -> origin/master" >> expect.err.2 + echo " $head1..$head2 master -> origin/master" >>expect.err.2 && head -2 expect.err >> expect.err.2 && ( cd downstream && @@ -415,7 +415,7 @@ test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' override git commit -m "new submodule" && head2=$(git rev-parse --short HEAD) && echo "From $pwd/." > expect.err.2 && - echo " $head1..$head2 master -> origin/master" >> expect.err.2 + echo " $head1..$head2 master -> origin/master" >>expect.err.2 && head -2 expect.err >> expect.err.2 && ( cd downstream && diff --git a/t/t5527-fetch-odd-refs.sh b/t/t5527-fetch-odd-refs.sh index edea9f957e..207899a99f 100755 --- a/t/t5527-fetch-odd-refs.sh +++ b/t/t5527-fetch-odd-refs.sh @@ -26,4 +26,37 @@ test_expect_success 'suffix ref is ignored during fetch' ' test_cmp expect actual ' +test_expect_success 'try to create repo with absurdly long refname' ' + ref240=$_z40/$_z40/$_z40/$_z40/$_z40/$_z40 && + ref1440=$ref240/$ref240/$ref240/$ref240/$ref240/$ref240 && + git init long && + ( + cd long && + test_commit long && + test_commit master + ) && + if git -C long update-ref refs/heads/$ref1440 long; then + test_set_prereq LONG_REF + else + echo >&2 "long refs not supported" + fi +' + +test_expect_success LONG_REF 'fetch handles extremely long refname' ' + git fetch long refs/heads/*:refs/remotes/long/* && + cat >expect <<-\EOF && + long + master + EOF + git for-each-ref --format="%(subject)" refs/remotes/long >actual && + test_cmp expect actual +' + +test_expect_success LONG_REF 'push handles extremely long refname' ' + git push long :refs/heads/$ref1440 && + git -C long for-each-ref --format="%(subject)" refs/heads >actual && + echo master >expect && + test_cmp expect actual +' + test_done diff --git a/t/t5528-push-default.sh b/t/t5528-push-default.sh index cc7451908b..73f4bb6346 100755 --- a/t/t5528-push-default.sh +++ b/t/t5528-push-default.sh @@ -26,7 +26,7 @@ check_pushed_commit () { # $2 = expected target branch for the push # $3 = [optional] repo to check for actual output (repo1 by default) test_push_success () { - git ${1:+-c push.default="$1"} push && + git ${1:+-c} ${1:+push.default="$1"} push && check_pushed_commit HEAD "$2" "$3" } @@ -34,7 +34,7 @@ test_push_success () { # check that push fails and does not modify any remote branch test_push_failure () { git --git-dir=repo1 log --no-walk --format='%h %s' --all >expect && - test_must_fail git ${1:+-c push.default="$1"} push && + test_must_fail git ${1:+-c} ${1:+push.default="$1"} push && git --git-dir=repo1 log --no-walk --format='%h %s' --all >actual && test_cmp expect actual } diff --git a/t/t5531-deep-submodule-push.sh b/t/t5531-deep-submodule-push.sh index 445bb5fe26..6507487c1a 100755 --- a/t/t5531-deep-submodule-push.sh +++ b/t/t5531-deep-submodule-push.sh @@ -104,7 +104,7 @@ test_expect_success 'push fails when commit on multiple branches if one branch h ' test_expect_success 'push succeeds if submodule has no remote and is on the first superproject commit' ' - git init --bare a + git init --bare a && git clone a a1 && ( cd a1 && diff --git a/t/t5533-push-cas.sh b/t/t5533-push-cas.sh index ba20d83333..c402d8d3d7 100755 --- a/t/t5533-push-cas.sh +++ b/t/t5533-push-cas.sh @@ -14,7 +14,7 @@ setup_srcdst_basic () { } test_expect_success setup ' - : create template repository + # create template repository test_commit A && test_commit B && test_commit C @@ -159,7 +159,7 @@ test_expect_success 'cover everything with default force-with-lease (protected)' ( cd src && git branch naster master^ - ) + ) && git ls-remote src refs/heads/\* >expect && ( cd dst && @@ -174,7 +174,7 @@ test_expect_success 'cover everything with default force-with-lease (allowed)' ' ( cd src && git branch naster master^ - ) + ) && ( cd dst && git fetch && diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh index b46118846c..37a433504e 100755 --- a/t/t5539-fetch-http-shallow.sh +++ b/t/t5539-fetch-http-shallow.sh @@ -3,12 +3,6 @@ test_description='fetch/clone from a shallow clone over http' . ./test-lib.sh - -if test -n "$NO_CURL"; then - skip_all='skipping test, git built without http support' - test_done -fi - . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd diff --git a/t/t5540-http-push-webdav.sh b/t/t5540-http-push-webdav.sh index 8d7b3c57e3..88ff5a49e4 100755 --- a/t/t5540-http-push-webdav.sh +++ b/t/t5540-http-push-webdav.sh @@ -169,7 +169,7 @@ test_expect_failure 'push to password-protected repository (no user in URL)' ' test_commit pw-nouser && set_askpass user@host pass@host && git push "$HTTPD_URL/auth/dumb/test_repo.git" HEAD && - expect_askpass both user@host + expect_askpass both user@host && git rev-parse --verify HEAD >expect && git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/auth/dumb/test_repo.git" \ rev-parse --verify HEAD >actual && diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index d2c681ebfd..fd7d06b9a2 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -6,11 +6,6 @@ test_description='test smart pushing over http via http-backend' . ./test-lib.sh -if test -n "$NO_CURL"; then - skip_all='skipping test, git built without http support' - test_done -fi - ROOT_PATH="$PWD" . "$TEST_DIRECTORY"/lib-gpg.sh . "$TEST_DIRECTORY"/lib-httpd.sh @@ -158,7 +153,7 @@ test_http_push_nonff "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git \ test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper' ' # create a dissimilarly-named remote ref so that git is unable to match the # two refs (viz. local, remote) unless an explicit refspec is provided. - git push origin master:retsam + git push origin master:retsam && echo "change changed" > path2 && git commit -a -m path2 --amend && @@ -324,12 +319,6 @@ test_expect_success 'push into half-auth-complete requires password' ' test_cmp expect actual ' -run_with_limited_cmdline () { - (ulimit -s 128 && "$@") -} - -test_lazy_prereq CMDLINE_LIMIT 'run_with_limited_cmdline true' - test_expect_success CMDLINE_LIMIT 'push 2000 tags over http' ' sha1=$(git rev-parse HEAD) && test_seq 2000 | diff --git a/t/t5542-push-http-shallow.sh b/t/t5542-push-http-shallow.sh index 2a691e09eb..5165833157 100755 --- a/t/t5542-push-http-shallow.sh +++ b/t/t5542-push-http-shallow.sh @@ -3,12 +3,6 @@ test_description='push from/to a shallow clone over http' . ./test-lib.sh - -if test -n "$NO_CURL"; then - say 'skipping test, git built without http support' - test_done -fi - . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd diff --git a/t/t5543-atomic-push.sh b/t/t5543-atomic-push.sh new file mode 100755 index 0000000000..3480b33007 --- /dev/null +++ b/t/t5543-atomic-push.sh @@ -0,0 +1,194 @@ +#!/bin/sh + +test_description='pushing to a repository using the atomic push option' + +. ./test-lib.sh + +mk_repo_pair () { + rm -rf workbench upstream && + test_create_repo upstream && + test_create_repo workbench && + ( + cd upstream && + git config receive.denyCurrentBranch warn + ) && + ( + cd workbench && + git remote add up ../upstream + ) +} + +# Compare the ref ($1) in upstream with a ref value from workbench ($2) +# i.e. test_refs second HEAD@{2} +test_refs () { + test $# = 2 && + git -C upstream rev-parse --verify "$1" >expect && + git -C workbench rev-parse --verify "$2" >actual && + test_cmp expect actual +} + +test_expect_success 'atomic push works for a single branch' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + git push --atomic up master + ) && + test_refs master master +' + +test_expect_success 'atomic push works for two branches' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git branch second && + git push --mirror up && + test_commit two && + git checkout second && + test_commit three && + git push --atomic up master second + ) && + test_refs master master && + test_refs second second +' + +test_expect_success 'atomic push works in combination with --mirror' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git checkout -b second && + test_commit two && + git push --atomic --mirror up + ) && + test_refs master master && + test_refs second second +' + +test_expect_success 'atomic push works in combination with --force' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git branch second master && + test_commit two_a && + git checkout second && + test_commit two_b && + test_commit three_b && + test_commit four && + git push --mirror up && + # The actual test is below + git checkout master && + test_commit three_a && + git checkout second && + git reset --hard HEAD^ && + git push --force --atomic up master second + ) && + test_refs master master && + test_refs second second +' + +# set up two branches where master can be pushed but second can not +# (non-fast-forward). Since second can not be pushed the whole operation +# will fail and leave master untouched. +test_expect_success 'atomic push fails if one branch fails' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git checkout -b second master && + test_commit two && + test_commit three && + test_commit four && + git push --mirror up && + git reset --hard HEAD~2 && + test_commit five && + git checkout master && + test_commit six && + test_must_fail git push --atomic --all up + ) && + test_refs master HEAD@{7} && + test_refs second HEAD@{4} +' + +test_expect_success 'atomic push fails if one tag fails remotely' ' + # prepare the repo + mk_repo_pair && + ( + cd workbench && + test_commit one && + git checkout -b second master && + test_commit two && + git push --mirror up + ) && + # a third party modifies the server side: + ( + cd upstream && + git checkout second && + git tag test_tag second + ) && + # see if we can now push both branches. + ( + cd workbench && + git checkout master && + test_commit three && + git checkout second && + test_commit four && + git tag test_tag && + test_must_fail git push --tags --atomic up master second + ) && + test_refs master HEAD@{3} && + test_refs second HEAD@{1} +' + +test_expect_success 'atomic push obeys update hook preventing a branch to be pushed' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git checkout -b second master && + test_commit two && + git push --mirror up + ) && + ( + cd upstream && + HOOKDIR="$(git rev-parse --git-dir)/hooks" && + HOOK="$HOOKDIR/update" && + mkdir -p "$HOOKDIR" && + write_script "$HOOK" <<-\EOF + # only allow update to master from now on + test "$1" = "refs/heads/master" + EOF + ) && + ( + cd workbench && + git checkout master && + test_commit three && + git checkout second && + test_commit four && + test_must_fail git push --atomic up master second + ) && + test_refs master HEAD@{3} && + test_refs second HEAD@{1} +' + +test_expect_success 'atomic push is not advertised if configured' ' + mk_repo_pair && + ( + cd upstream + git config receive.advertiseatomic 0 + ) && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + test_must_fail git push --atomic up master + ) && + test_refs master HEAD@{1} +' + +test_done diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index ac71418a1b..87a7aa04ae 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -2,12 +2,6 @@ test_description='test dumb fetching over http via static file' . ./test-lib.sh - -if test -n "$NO_CURL"; then - skip_all='skipping test, git built without http support' - test_done -fi - . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd @@ -15,7 +9,7 @@ test_expect_success 'setup repository' ' git config push.default matching && echo content1 >file && git add file && - git commit -m one + git commit -m one && echo content2 >file && git add file && git commit -m two @@ -165,9 +159,27 @@ test_expect_success 'fetch notices corrupt idx' ' ) ' +test_expect_success 'fetch can handle previously-fetched .idx files' ' + git checkout --orphan branch1 && + echo base >file && + git add file && + git commit -m base && + git --bare init "$HTTPD_DOCUMENT_ROOT_PATH"/repo_packed_branches.git && + git push "$HTTPD_DOCUMENT_ROOT_PATH"/repo_packed_branches.git branch1 && + git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH"/repo_packed_branches.git repack -d && + git checkout -b branch2 branch1 && + echo b2 >>file && + git commit -a -m b2 && + git push "$HTTPD_DOCUMENT_ROOT_PATH"/repo_packed_branches.git branch2 && + git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH"/repo_packed_branches.git repack -d && + git --bare init clone_packed_branches.git && + git --git-dir=clone_packed_branches.git fetch "$HTTPD_URL"/dumb/repo_packed_branches.git branch1:branch1 && + git --git-dir=clone_packed_branches.git fetch "$HTTPD_URL"/dumb/repo_packed_branches.git branch2:branch2 +' + test_expect_success 'did not use upload-pack service' ' - grep '/git-upload-pack' <"$HTTPD_ROOT_PATH"/access.log >act - : >exp + test_might_fail grep '/git-upload-pack' <"$HTTPD_ROOT_PATH"/access.log >act && + : >exp && test_cmp exp act ' @@ -196,5 +208,47 @@ test_expect_success 'reencoding is robust to whitespace oddities' ' grep "this is the error message" stderr ' +check_language () { + case "$2" in + '') + >expect + ;; + ?*) + echo "Accept-Language: $1" >expect + ;; + esac && + GIT_CURL_VERBOSE=1 \ + LANGUAGE=$2 \ + git ls-remote "$HTTPD_URL/dumb/repo.git" >output 2>&1 && + tr -d '\015' <output | + sort -u | + sed -ne '/^Accept-Language:/ p' >actual && + test_cmp expect actual +} + +test_expect_success 'git client sends Accept-Language based on LANGUAGE' ' + check_language "ko-KR, *;q=0.9" ko_KR.UTF-8' + +test_expect_success 'git client sends Accept-Language correctly with unordinary LANGUAGE' ' + check_language "ko-KR, *;q=0.9" "ko_KR:" && + check_language "ko-KR, en-US;q=0.9, *;q=0.8" "ko_KR::en_US" && + check_language "ko-KR, *;q=0.9" ":::ko_KR" && + check_language "ko-KR, en-US;q=0.9, *;q=0.8" "ko_KR!!:en_US" && + check_language "ko-KR, ja-JP;q=0.9, *;q=0.8" "ko_KR en_US:ja_JP"' + +test_expect_success 'git client sends Accept-Language with many preferred languages' ' + check_language "ko-KR, en-US;q=0.9, fr-CA;q=0.8, de;q=0.7, sr;q=0.6, \ +ja;q=0.5, zh;q=0.4, sv;q=0.3, pt;q=0.2, *;q=0.1" \ + ko_KR.EUC-KR:en_US.UTF-8:fr_CA:de.UTF-8@euro:sr@latin:ja:zh:sv:pt && + check_language "ko-KR, en-US;q=0.99, fr-CA;q=0.98, de;q=0.97, sr;q=0.96, \ +ja;q=0.95, zh;q=0.94, sv;q=0.93, pt;q=0.92, nb;q=0.91, *;q=0.90" \ + ko_KR.EUC-KR:en_US.UTF-8:fr_CA:de.UTF-8@euro:sr@latin:ja:zh:sv:pt:nb +' + +test_expect_success 'git client does not send an empty Accept-Language' ' + GIT_CURL_VERBOSE=1 LANGUAGE= git ls-remote "$HTTPD_URL/dumb/repo.git" 2>stderr && + ! grep "^Accept-Language:" stderr +' + stop_httpd test_done diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index 6cbc12d9a7..58207d8825 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -2,12 +2,6 @@ test_description='test smart fetching over http via http-backend' . ./test-lib.sh - -if test -n "$NO_CURL"; then - skip_all='skipping test, git built without http support' - test_done -fi - . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd @@ -83,7 +77,7 @@ test_expect_success 'clone http repository' ' test_expect_success 'fetch changes via http' ' echo content >>file && git commit -a -m two && - git push public + git push public && (cd clone && git pull) && test_cmp file clone/file ' @@ -169,7 +163,7 @@ test_expect_success 'GIT_SMART_HTTP can disable smart http' ' ' test_expect_success 'invalid Content-Type rejected' ' - test_must_fail git clone $HTTPD_URL/broken_smart/repo.git 2>actual + test_must_fail git clone $HTTPD_URL/broken_smart/repo.git 2>actual && grep "not valid:" actual ' @@ -209,41 +203,84 @@ test_expect_success 'cookies stored in http.cookiefile when http.savecookies set git config http.cookiefile cookies.txt && git config http.savecookies true && git ls-remote $HTTPD_URL/smart_cookies/repo.git master && - tail -3 cookies.txt > cookies_tail.txt + tail -3 cookies.txt >cookies_tail.txt && test_cmp expect_cookies.txt cookies_tail.txt ' -test_expect_success EXPENSIVE 'create 50,000 tags in the repo' ' - ( - cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && - for i in `test_seq 50000` +test_expect_success 'transfer.hiderefs works over smart-http' ' + test_commit hidden && + test_commit visible && + git push public HEAD^:refs/heads/a HEAD:refs/heads/b && + git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/repo.git" \ + config transfer.hiderefs refs/heads/a && + git clone --bare "$HTTPD_URL/smart/repo.git" hidden.git && + test_must_fail git -C hidden.git rev-parse --verify a && + git -C hidden.git rev-parse --verify b +' + +# create an arbitrary number of tags, numbered from tag-$1 to tag-$2 +create_tags () { + rm -f marks && + for i in $(test_seq "$1" "$2") do - echo "commit refs/heads/too-many-refs" - echo "mark :$i" - echo "committer git <git@example.com> $i +0000" - echo "data 0" - echo "M 644 inline bla.txt" - echo "data 4" - echo "bla" + # don't use here-doc, because it requires a process + # per loop iteration + echo "commit refs/heads/too-many-refs-$1" && + echo "mark :$i" && + echo "committer git <git@example.com> $i +0000" && + echo "data 0" && + echo "M 644 inline bla.txt" && + echo "data 4" && + echo "bla" && # make every commit dangling by always # rewinding the branch after each commit - echo "reset refs/heads/too-many-refs" - echo "from :1" + echo "reset refs/heads/too-many-refs-$1" && + echo "from :$1" done | git fast-import --export-marks=marks && # now assign tags to all the dangling commits we created above tag=$(perl -e "print \"bla\" x 30") && sed -e "s|^:\([^ ]*\) \(.*\)$|\2 refs/tags/$tag-\1|" <marks >>packed-refs +} + +test_expect_success 'create 2,000 tags in the repo' ' + ( + cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + create_tags 1 2000 ) ' -test_expect_success EXPENSIVE 'clone the 50,000 tag repo to check OS command line overflow' ' - git clone $HTTPD_URL/smart/repo.git too-many-refs && +test_expect_success CMDLINE_LIMIT \ + 'clone the 2,000 tag repo to check OS command line overflow' ' + run_with_limited_cmdline git clone $HTTPD_URL/smart/repo.git too-many-refs && ( cd too-many-refs && - test $(git for-each-ref refs/tags | wc -l) = 50000 + git for-each-ref refs/tags >actual && + test_line_count = 2000 actual ) ' +test_expect_success 'large fetch-pack requests can be split across POSTs' ' + GIT_CURL_VERBOSE=1 git -c http.postbuffer=65536 \ + clone --bare "$HTTPD_URL/smart/repo.git" split.git 2>err && + grep "^> POST" err >posts && + test_line_count = 2 posts +' + +test_expect_success EXPENSIVE 'http can handle enormous ref negotiation' ' + ( + cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + create_tags 2001 50000 + ) && + git -C too-many-refs fetch -q --tags && + ( + cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + create_tags 50001 100000 + ) && + git -C too-many-refs fetch -q --tags && + git -C too-many-refs for-each-ref refs/tags >tags && + test_line_count = 100000 tags +' + stop_httpd test_done diff --git a/t/t5561-http-backend.sh b/t/t5561-http-backend.sh index d23fb02384..19afe96698 100755 --- a/t/t5561-http-backend.sh +++ b/t/t5561-http-backend.sh @@ -2,12 +2,6 @@ test_description='test git-http-backend' . ./test-lib.sh - -if test -n "$NO_CURL"; then - skip_all='skipping test, git built without http support' - test_done -fi - . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd diff --git a/t/t5570-git-daemon.sh b/t/t5570-git-daemon.sh index 6b16379951..b7e283252d 100755 --- a/t/t5570-git-daemon.sh +++ b/t/t5570-git-daemon.sh @@ -142,4 +142,31 @@ test_expect_success 'read access denied' "test_remote_error -x 'no such reposito test_expect_success 'not exported' "test_remote_error -n 'repository not exported' fetch repo.git " stop_git_daemon +start_git_daemon --interpolated-path="$GIT_DAEMON_DOCUMENT_ROOT_PATH/%H%D" + +test_expect_success 'access repo via interpolated hostname' ' + repo="$GIT_DAEMON_DOCUMENT_ROOT_PATH/localhost/interp.git" && + git init --bare "$repo" && + git push "$repo" HEAD && + >"$repo"/git-daemon-export-ok && + rm -rf tmp.git && + GIT_OVERRIDE_VIRTUAL_HOST=localhost \ + git clone --bare "$GIT_DAEMON_URL/interp.git" tmp.git && + rm -rf tmp.git && + GIT_OVERRIDE_VIRTUAL_HOST=LOCALHOST \ + git clone --bare "$GIT_DAEMON_URL/interp.git" tmp.git +' + +test_expect_success 'hostname cannot break out of directory' ' + rm -rf tmp.git && + repo="$GIT_DAEMON_DOCUMENT_ROOT_PATH/../escape.git" && + git init --bare "$repo" && + git push "$repo" HEAD && + >"$repo"/git-daemon-export-ok && + test_must_fail \ + env GIT_OVERRIDE_VIRTUAL_HOST=.. \ + git clone --bare "$GIT_DAEMON_URL/escape.git" tmp.git +' + +stop_git_daemon test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index e4f10c0f68..bfdaf75966 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -296,16 +296,28 @@ setup_ssh_wrapper () { ' } +copy_ssh_wrapper_as () { + cp "$TRASH_DIRECTORY/ssh-wrapper" "$1" && + GIT_SSH="$1" && + export GIT_SSH +} + expect_ssh () { test_when_finished ' (cd "$TRASH_DIRECTORY" && rm -f ssh-expect && >ssh-output) ' && { - case "$1" in - none) + case "$#" in + 1) ;; - *) + 2) echo "ssh: $1 git-upload-pack '$2'" + ;; + 3) + echo "ssh: $1 $2 git-upload-pack '$3'" + ;; + *) + echo "ssh: $1 $2 git-upload-pack '$3' $4" esac } >"$TRASH_DIRECTORY/ssh-expect" && (cd "$TRASH_DIRECTORY" && test_cmp ssh-expect ssh-output) @@ -326,9 +338,36 @@ test_expect_success !MINGW,!CYGWIN 'clone local path foo:bar' ' test_expect_success 'bracketed hostnames are still ssh' ' git clone "[myhost:123]:src" ssh-bracket-clone && - expect_ssh myhost:123 src + expect_ssh "-p 123" myhost src +' + +test_expect_success 'uplink is not treated as putty' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/uplink" && + git clone "[myhost:123]:src" ssh-bracket-clone-uplink && + expect_ssh "-p 123" myhost src ' +test_expect_success 'plink is treated specially (as putty)' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && + git clone "[myhost:123]:src" ssh-bracket-clone-plink-0 && + expect_ssh "-P 123" myhost src +' + +test_expect_success 'plink.exe is treated specially (as putty)' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink.exe" && + git clone "[myhost:123]:src" ssh-bracket-clone-plink-1 && + expect_ssh "-P 123" myhost src +' + +test_expect_success 'tortoiseplink is like putty, with extra arguments' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/tortoiseplink" && + git clone "[myhost:123]:src" ssh-bracket-clone-plink-2 && + expect_ssh "-batch -P 123" myhost src +' + +# Reset the GIT_SSH environment variable for clone tests. +setup_ssh_wrapper + counter=0 # $1 url # $2 none|host @@ -336,7 +375,8 @@ counter=0 test_clone_url () { counter=$(($counter + 1)) test_might_fail git clone "$1" tmp$counter && - expect_ssh "$2" "$3" + shift && + expect_ssh "$@" } test_expect_success !MINGW 'clone c:temp is ssl' ' @@ -359,7 +399,7 @@ done for repo in rep rep/home/project 123 do test_expect_success "clone [::1]:$repo" ' - test_clone_url [::1]:$repo ::1 $repo + test_clone_url [::1]:$repo ::1 "$repo" ' done #home directory @@ -380,14 +420,17 @@ do done #with ssh:// scheme -test_expect_success 'clone ssh://host.xz/home/user/repo' ' - test_clone_url "ssh://host.xz/home/user/repo" host.xz "/home/user/repo" -' - -# from home directory -test_expect_success 'clone ssh://host.xz/~repo' ' - test_clone_url "ssh://host.xz/~repo" host.xz "~repo" +#ignore trailing colon +for tcol in "" : +do + test_expect_success "clone ssh://host.xz$tcol/home/user/repo" ' + test_clone_url "ssh://host.xz$tcol/home/user/repo" host.xz /home/user/repo + ' + # from home directory + test_expect_success "clone ssh://host.xz$tcol/~repo" ' + test_clone_url "ssh://host.xz$tcol/~repo" host.xz "~repo" ' +done # with port number test_expect_success 'clone ssh://host.xz:22/home/user/repo' ' @@ -400,24 +443,40 @@ test_expect_success 'clone ssh://host.xz:22/~repo' ' ' #IPv6 -test_expect_success 'clone ssh://[::1]/home/user/repo' ' - test_clone_url "ssh://[::1]/home/user/repo" "::1" "/home/user/repo" -' +for tuah in ::1 [::1] [::1]: user@::1 user@[::1] user@[::1]: [user@::1] [user@::1]: +do + ehost=$(echo $tuah | sed -e "s/1]:/1]/ "| tr -d "[]") + test_expect_success "clone ssh://$tuah/home/user/repo" " + test_clone_url ssh://$tuah/home/user/repo $ehost /home/user/repo + " +done #IPv6 from home directory -test_expect_success 'clone ssh://[::1]/~repo' ' - test_clone_url "ssh://[::1]/~repo" "::1" "~repo" -' +for tuah in ::1 [::1] user@::1 user@[::1] [user@::1] +do + euah=$(echo $tuah | tr -d "[]") + test_expect_success "clone ssh://$tuah/~repo" " + test_clone_url ssh://$tuah/~repo $euah '~repo' + " +done #IPv6 with port number -test_expect_success 'clone ssh://[::1]:22/home/user/repo' ' - test_clone_url "ssh://[::1]:22/home/user/repo" "-p 22 ::1" "/home/user/repo" -' +for tuah in [::1] user@[::1] [user@::1] +do + euah=$(echo $tuah | tr -d "[]") + test_expect_success "clone ssh://$tuah:22/home/user/repo" " + test_clone_url ssh://$tuah:22/home/user/repo '-p 22' $euah /home/user/repo + " +done #IPv6 from home directory with port number -test_expect_success 'clone ssh://[::1]:22/~repo' ' - test_clone_url "ssh://[::1]:22/~repo" "-p 22 ::1" "~repo" -' +for tuah in [::1] user@[::1] [user@::1] +do + euah=$(echo $tuah | tr -d "[]") + test_expect_success "clone ssh://$tuah:22/~repo" " + test_clone_url ssh://$tuah:22/~repo '-p 22' $euah '~repo' + " +done test_expect_success 'clone from a repository with two identical branches' ' diff --git a/t/t5700-clone-reference.sh b/t/t5700-clone-reference.sh index 6537911a43..3e783fc450 100755 --- a/t/t5700-clone-reference.sh +++ b/t/t5700-clone-reference.sh @@ -198,4 +198,21 @@ test_expect_success 'clone using repo pointed at by gitfile as reference' ' test_cmp expected "$base_dir/O/.git/objects/info/alternates" ' +test_expect_success 'clone and dissociate from reference' ' + git init P && + ( + cd P && test_commit one + ) && + git clone P Q && + ( + cd Q && test_commit two + ) && + git clone --no-local --reference=P Q R && + git clone --no-local --reference=P --dissociate Q S && + # removing the reference P would corrupt R but not S + rm -fr P && + test_must_fail git -C R fsck && + git -C S fsck +' + test_done diff --git a/t/t5709-clone-refspec.sh b/t/t5709-clone-refspec.sh index 6f1ea984d4..7ace2535c8 100755 --- a/t/t5709-clone-refspec.sh +++ b/t/t5709-clone-refspec.sh @@ -147,7 +147,7 @@ test_expect_success '--single-branch with detached' ' git for-each-ref refs/remotes/origin | sed -e "/HEAD$/d" \ -e "s|/remotes/origin/|/heads/|" >../actual - ) + ) && # nothing >expect && test_cmp expect actual diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh index 2419407546..c9d3ed14c3 100755 --- a/t/t5801-remote-helpers.sh +++ b/t/t5801-remote-helpers.sh @@ -281,4 +281,28 @@ test_expect_success 'push messages' ' ) ' +test_expect_success 'fetch HEAD' ' + (cd server && + git checkout master && + echo more >>file && + git commit -a -m more + ) && + (cd local && + git fetch origin HEAD + ) && + compare_refs server HEAD local FETCH_HEAD +' + +test_expect_success 'fetch url' ' + (cd server && + git checkout master && + echo more >>file && + git commit -a -m more + ) && + (cd local && + git fetch "testgit::${PWD}/../server" + ) && + compare_refs server HEAD local FETCH_HEAD +' + test_done diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh index 2602086303..3e752ce032 100755 --- a/t/t6000-rev-list-misc.sh +++ b/t/t6000-rev-list-misc.sh @@ -42,7 +42,7 @@ test_expect_success 'rev-list --objects with pathspecs and copied files' ' test_tick && git commit -m that && - ONE=$(git rev-parse HEAD:one) + ONE=$(git rev-parse HEAD:one) && git rev-list --objects HEAD two >output && grep "$ONE two/three" output && ! grep one output @@ -85,7 +85,7 @@ test_expect_success 'rev-list can show index objects' ' # - we do not show the root tree; since we updated the index, it # does not have a valid cache tree # - cat >expect <<-\EOF + cat >expect <<-\EOF && 8e4020bb5a8d8c873b25de15933e75cc0fc275df one d9d3a7417b9605cfd88ee6306b28dadc29e6ab08 only-in-index 9200b628cf9dc883a85a7abc8d6e6730baee589c two @@ -96,4 +96,8 @@ test_expect_success 'rev-list can show index objects' ' test_cmp expect actual ' +test_expect_success '--bisect and --first-parent can not be combined' ' + test_must_fail git rev-list --bisect --first-parent HEAD +' + test_done diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index a02a45afd2..b77d4c97c1 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -45,7 +45,7 @@ test_expect_success 'setup' ' head2=$(git rev-parse --verify HEAD) && head2_short=$(git rev-parse --verify --short $head2) && tree2=$(git rev-parse --verify HEAD:) && - tree2_short=$(git rev-parse --verify --short $tree2) + tree2_short=$(git rev-parse --verify --short $tree2) && git config --unset i18n.commitEncoding ' @@ -358,10 +358,7 @@ test_expect_success 'empty email' ' test_tick && C=$(GIT_AUTHOR_EMAIL= git commit-tree HEAD^{tree} </dev/null) && A=$(git show --pretty=format:%an,%ae,%ad%n -s $C) && - test "$A" = "A U Thor,,Thu Apr 7 15:14:13 2005 -0700" || { - echo "Eh? $A" >failure - false - } + verbose test "$A" = "A U Thor,,Thu Apr 7 15:14:13 2005 -0700" ' test_expect_success 'del LF before empty (1)' ' diff --git a/t/t6012-rev-list-simplify.sh b/t/t6012-rev-list-simplify.sh index fde5e712eb..b89cd6b07a 100755 --- a/t/t6012-rev-list-simplify.sh +++ b/t/t6012-rev-list-simplify.sh @@ -95,10 +95,7 @@ check_outcome () { git log --pretty="$FMT" --parents $param | unnote >actual && sed -e "s/^.* \([^ ]*\) .*/\1/" >check <actual && - test_cmp expect check || { - cat actual - false - } + test_cmp expect check ' } @@ -121,10 +118,7 @@ test_expect_success 'full history simplification without parent' ' git log --pretty="$FMT" --full-history E -- lost | unnote >actual && sed -e "s/^.* \([^ ]*\) .*/\1/" >check <actual && - test_cmp expect check || { - cat actual - false - } + test_cmp expect check ' test_expect_success '--full-diff is not affected by --parents' ' diff --git a/t/t6014-rev-list-all.sh b/t/t6014-rev-list-all.sh index 991ab4a65b..c9bedd29cb 100755 --- a/t/t6014-rev-list-all.sh +++ b/t/t6014-rev-list-all.sh @@ -35,4 +35,8 @@ test_expect_success 'repack does not lose detached HEAD' ' ' +test_expect_success 'rev-list --graph --no-walk is forbidden' ' + test_must_fail git rev-list --graph --no-walk HEAD +' + test_done diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh index a89dfbef08..05ebba7afa 100755 --- a/t/t6022-merge-rename.sh +++ b/t/t6022-merge-rename.sh @@ -685,7 +685,7 @@ test_expect_success 'setup avoid unnecessary update, dir->(file,nothing)' ' git add -A && git commit -mA && - git checkout -b side + git checkout -b side && git rm -rf df && git commit -mB && @@ -716,7 +716,7 @@ test_expect_success 'setup avoid unnecessary update, modify/delete' ' git add -A && git commit -mA && - git checkout -b side + git checkout -b side && git rm -f file && git commit -m "Delete file" && @@ -745,7 +745,7 @@ test_expect_success 'setup avoid unnecessary update, rename/add-dest' ' git add -A && git commit -mA && - git checkout -b side + git checkout -b side && cp file newfile && git add -A && git commit -m "Add file copy" && diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index 3758961765..190ee903cf 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -69,7 +69,8 @@ test_expect_success 'works in subdirectory' ' cp new1.txt dir/a.txt && cp orig.txt dir/o.txt && cp new2.txt dir/b.txt && - ( cd dir && git merge-file a.txt o.txt b.txt ) + ( cd dir && git merge-file a.txt o.txt b.txt ) && + test_path_is_missing a.txt ' cp new1.txt test.txt diff --git a/t/t6026-merge-attr.sh b/t/t6026-merge-attr.sh index 5e439972be..3c21938a68 100755 --- a/t/t6026-merge-attr.sh +++ b/t/t6026-merge-attr.sh @@ -11,7 +11,7 @@ test_expect_success setup ' for f in text binary union do - echo Initial >$f && git add $f || break + echo Initial >$f && git add $f || return 1 done && test_tick && git commit -m Initial && @@ -19,7 +19,7 @@ test_expect_success setup ' git branch side && for f in text binary union do - echo Master >>$f && git add $f || break + echo Master >>$f && git add $f || return 1 done && test_tick && git commit -m Master && @@ -27,7 +27,7 @@ test_expect_success setup ' git checkout side && for f in text binary union do - echo Side >>$f && git add $f || break + echo Side >>$f && git add $f || return 1 done && test_tick && git commit -m Side && diff --git a/t/t6028-merge-up-to-date.sh b/t/t6028-merge-up-to-date.sh index c518e9c30c..7763c1ba98 100755 --- a/t/t6028-merge-up-to-date.sh +++ b/t/t6028-merge-up-to-date.sh @@ -83,7 +83,7 @@ test_expect_success 'merge fast-forward octopus' ' git reset --hard c0 && test_tick && - git merge c1 c2 + git merge c1 c2 && expect=$(git rev-parse c2) && current=$(git rev-parse HEAD) && test "$expect" = "$current" diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index 064f5cefeb..06b4868109 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -52,15 +52,8 @@ test_expect_success 'bisect starts with only one bad' ' test_expect_success 'bisect does not start with only one good' ' git bisect reset && git bisect start && - git bisect good $HASH1 || return 1 - - if git bisect next - then - echo Oops, should have failed. - false - else - : - fi + git bisect good $HASH1 && + test_must_fail git bisect next ' test_expect_success 'bisect start with one bad and good' ' @@ -191,34 +184,27 @@ test_expect_success 'bisect start: no ".git/BISECT_START" if checkout error' ' # but $HASH2 is bad, # so we should find $HASH2 as the first bad commit test_expect_success 'bisect skip: successful result' ' + test_when_finished git bisect reset && git bisect reset && git bisect start $HASH4 $HASH1 && git bisect skip && git bisect bad > my_bisect_log.txt && - grep "$HASH2 is the first bad commit" my_bisect_log.txt && - git bisect reset + grep "$HASH2 is the first bad commit" my_bisect_log.txt ' # $HASH1 is good, $HASH4 is bad, we skip $HASH3 and $HASH2 # so we should not be able to tell the first bad commit # among $HASH2, $HASH3 and $HASH4 test_expect_success 'bisect skip: cannot tell between 3 commits' ' + test_when_finished git bisect reset && git bisect start $HASH4 $HASH1 && - git bisect skip || return 1 - - if git bisect skip > my_bisect_log.txt - then - echo Oops, should have failed. - false - else - test $? -eq 2 && - grep "first bad commit could be any of" my_bisect_log.txt && - ! grep $HASH1 my_bisect_log.txt && - grep $HASH2 my_bisect_log.txt && - grep $HASH3 my_bisect_log.txt && - grep $HASH4 my_bisect_log.txt && - git bisect reset - fi + git bisect skip && + test_expect_code 2 git bisect skip >my_bisect_log.txt && + grep "first bad commit could be any of" my_bisect_log.txt && + ! grep $HASH1 my_bisect_log.txt && + grep $HASH2 my_bisect_log.txt && + grep $HASH3 my_bisect_log.txt && + grep $HASH4 my_bisect_log.txt ' # $HASH1 is good, $HASH4 is bad, we skip $HASH3 @@ -226,22 +212,15 @@ test_expect_success 'bisect skip: cannot tell between 3 commits' ' # so we should not be able to tell the first bad commit # among $HASH3 and $HASH4 test_expect_success 'bisect skip: cannot tell between 2 commits' ' + test_when_finished git bisect reset && git bisect start $HASH4 $HASH1 && - git bisect skip || return 1 - - if git bisect good > my_bisect_log.txt - then - echo Oops, should have failed. - false - else - test $? -eq 2 && - grep "first bad commit could be any of" my_bisect_log.txt && - ! grep $HASH1 my_bisect_log.txt && - ! grep $HASH2 my_bisect_log.txt && - grep $HASH3 my_bisect_log.txt && - grep $HASH4 my_bisect_log.txt && - git bisect reset - fi + git bisect skip && + test_expect_code 2 git bisect good >my_bisect_log.txt && + grep "first bad commit could be any of" my_bisect_log.txt && + ! grep $HASH1 my_bisect_log.txt && + ! grep $HASH2 my_bisect_log.txt && + grep $HASH3 my_bisect_log.txt && + grep $HASH4 my_bisect_log.txt ' # $HASH1 is good, $HASH4 is both skipped and bad, we skip $HASH3 @@ -249,24 +228,18 @@ test_expect_success 'bisect skip: cannot tell between 2 commits' ' # so we should not be able to tell the first bad commit # among $HASH3 and $HASH4 test_expect_success 'bisect skip: with commit both bad and skipped' ' + test_when_finished git bisect reset && git bisect start && git bisect skip && git bisect bad && git bisect good $HASH1 && git bisect skip && - if git bisect good > my_bisect_log.txt - then - echo Oops, should have failed. - false - else - test $? -eq 2 && - grep "first bad commit could be any of" my_bisect_log.txt && - ! grep $HASH1 my_bisect_log.txt && - ! grep $HASH2 my_bisect_log.txt && - grep $HASH3 my_bisect_log.txt && - grep $HASH4 my_bisect_log.txt && - git bisect reset - fi + test_expect_code 2 git bisect good >my_bisect_log.txt && + grep "first bad commit could be any of" my_bisect_log.txt && + ! grep $HASH1 my_bisect_log.txt && + ! grep $HASH2 my_bisect_log.txt && + grep $HASH3 my_bisect_log.txt && + grep $HASH4 my_bisect_log.txt ' # We want to automatically find the commit that @@ -601,8 +574,7 @@ test_expect_success 'test bisection on bare repo - --no-checkout specified' ' git bisect bad $HASH4 && git bisect run eval \ "test \$(git rev-list BISECT_HEAD ^$HASH2 --max-count=1 | wc -l) = 0" \ - >../nocheckout.log && - git bisect reset + >../nocheckout.log ) && grep "$HASH3 is the first bad commit" nocheckout.log ' @@ -617,8 +589,7 @@ test_expect_success 'test bisection on bare repo - --no-checkout defaulted' ' git bisect bad $HASH4 && git bisect run eval \ "test \$(git rev-list BISECT_HEAD ^$HASH2 --max-count=1 | wc -l) = 0" \ - >../defaulted.log && - git bisect reset + >../defaulted.log ) && grep "$HASH3 is the first bad commit" defaulted.log ' @@ -642,14 +613,14 @@ test_expect_success 'broken branch creation' ' mkdir missing && :> missing/MISSING && git add missing/MISSING && - git commit -m "6(broken): Added file that will be deleted" + git commit -m "6(broken): Added file that will be deleted" && git tag BROKEN_HASH6 && add_line_into_file "7(broken): second line on a broken branch" hello2 && git tag BROKEN_HASH7 && add_line_into_file "8(broken): third line on a broken branch" hello2 && git tag BROKEN_HASH8 && git rm missing/MISSING && - git commit -m "9(broken): Remove missing file" + git commit -m "9(broken): Remove missing file" && git tag BROKEN_HASH9 && rm .git/objects/39/f7e61a724187ab767d2e08442d9b6b9dab587d ' @@ -779,4 +750,13 @@ test_expect_success 'bisect log: only skip commits left' ' git bisect reset ' +test_expect_success '"git bisect bad HEAD" behaves as "git bisect bad"' ' + git checkout parallel && + git bisect start HEAD $HASH1 && + git bisect good HEAD && + git bisect bad HEAD && + test "$HASH6" = $(git rev-parse --verify HEAD) && + git bisect reset +' + test_done diff --git a/t/t6032-merge-large-rename.sh b/t/t6032-merge-large-rename.sh index 15beecc3c6..0f79268917 100755 --- a/t/t6032-merge-large-rename.sh +++ b/t/t6032-merge-large-rename.sh @@ -28,10 +28,10 @@ make_text() { test_rename() { test_expect_success "rename ($1, $2)" ' - n='$1' - expect='$2' + n='$1' && + expect='$2' && git checkout -f master && - git branch -D test$n || true && + test_might_fail git branch -D test$n && git reset --hard initial && for i in $(count $n); do make_text $i initial initial >$i diff --git a/t/t6034-merge-rename-nocruft.sh b/t/t6034-merge-rename-nocruft.sh index 65be95fbaa..89871aa5b0 100755 --- a/t/t6034-merge-rename-nocruft.sh +++ b/t/t6034-merge-rename-nocruft.sh @@ -73,33 +73,12 @@ test_expect_success 'merge white into red (A->B,M->N)' \ ' git checkout -b red-white red && git merge white && - git write-tree >/dev/null || { - echo "BAD: merge did not complete" - return 1 - } - - test -f B || { - echo "BAD: B does not exist in working directory" - return 1 - } - test -f N || { - echo "BAD: N does not exist in working directory" - return 1 - } - test -f R || { - echo "BAD: R does not exist in working directory" - return 1 - } - - test -f A && { - echo "BAD: A still exists in working directory" - return 1 - } - test -f M && { - echo "BAD: M still exists in working directory" - return 1 - } - return 0 + git write-tree && + test_path_is_file B && + test_path_is_file N && + test_path_is_file R && + test_path_is_missing A && + test_path_is_missing M ' # This test broke in 8371234ecaaf6e14fe3f2082a855eff1bbd79ae9 @@ -108,32 +87,13 @@ test_expect_success 'merge blue into white (A->B, mod A, A untracked)' \ git checkout -b white-blue white && echo dirty >A && git merge blue && - git write-tree >/dev/null || { - echo "BAD: merge did not complete" - return 1 - } - - test -f A || { - echo "BAD: A does not exist in working directory" - return 1 - } - test `cat A` = dirty || { - echo "BAD: A content is wrong" - return 1 - } - test -f B || { - echo "BAD: B does not exist in working directory" - return 1 - } - test -f N || { - echo "BAD: N does not exist in working directory" - return 1 - } - test -f M && { - echo "BAD: M still exists in working directory" - return 1 - } - return 0 + git write-tree && + test_path_is_file A && + echo dirty >expect && + test_cmp expect A && + test_path_is_file B && + test_path_is_file N && + test_path_is_missing M ' test_done diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index a86087be95..9d6621c056 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -86,7 +86,7 @@ test_expect_success 'setup criss-cross + rename merges with basic modification' rm -rf .git && git init && - ten="0 1 2 3 4 5 6 7 8 9" + ten="0 1 2 3 4 5 6 7 8 9" && for i in $ten do echo line $i in a sample file @@ -195,12 +195,7 @@ test_expect_success 'git detects differently handled merges conflict' ' git reset --hard && git checkout D^0 && - git merge -s recursive E^0 && { - echo "BAD: should have conflicted" - test "Incorrectly merged content" = "$(cat new_a)" && - echo "BAD: Silently accepted wrong content" - return 1 - } + test_must_fail git merge -s recursive E^0 && test 3 = $(git ls-files -s | wc -l) && test 3 = $(git ls-files -u | wc -l) && @@ -533,7 +528,7 @@ test_expect_success 'merge of E2 & D fails but has appropriate contents' ' test $(git rev-parse :3:a) = $(git rev-parse B:a) && test $(git rev-parse :2:a/file) = $(git rev-parse E2:a/file) && - test $(git rev-parse :1:a/file) = $(git rev-parse C:a/file) + test $(git rev-parse :1:a/file) = $(git rev-parse C:a/file) && test $(git rev-parse :0:ignore-me) = $(git rev-parse A:ignore-me) && test -f a~D^0 diff --git a/t/t6039-merge-ignorecase.sh b/t/t6039-merge-ignorecase.sh index a977653147..531850d834 100755 --- a/t/t6039-merge-ignorecase.sh +++ b/t/t6039-merge-ignorecase.sh @@ -15,7 +15,7 @@ test_expect_success 'merge with case-changing rename' ' >TestCase && git add TestCase && git commit -m "add TestCase" && - git tag baseline + git tag baseline && git checkout -b with-camel && >foo && git add foo && diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index 7ac8fd06c3..3d5c238c81 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -12,10 +12,9 @@ advance () { } test_expect_success setup ' - for i in a b c; - do - advance $i || break - done && + advance a && + advance b && + advance c && git clone . test && ( cd test && diff --git a/t/t6111-rev-list-treesame.sh b/t/t6111-rev-list-treesame.sh index 88b84dfa73..32474c23d3 100755 --- a/t/t6111-rev-list-treesame.sh +++ b/t/t6111-rev-list-treesame.sh @@ -58,7 +58,7 @@ test_expect_success setup ' git checkout master && test_tick && git merge --no-ff fiddler-branch && - note K + note K && test_commit "file=Part 1" file "Part 1" L && @@ -92,10 +92,7 @@ check_outcome () { git log --format="$FMT" $param | unnote >actual && sed -e "$munge_actual" <actual >check && - test_cmp expect check || { - cat actual - false - } + test_cmp expect check ' } diff --git a/t/t6132-pathspec-exclude.sh b/t/t6132-pathspec-exclude.sh index 62049be0c7..e1e1b1fa38 100755 --- a/t/t6132-pathspec-exclude.sh +++ b/t/t6132-pathspec-exclude.sh @@ -30,7 +30,7 @@ test_expect_success 'exclude only should error out' ' ' test_expect_success 't_e_i() exclude sub' ' - git log --oneline --format=%s -- . ":(exclude)sub" >actual + git log --oneline --format=%s -- . ":(exclude)sub" >actual && cat <<EOF >expect && sub2/file file @@ -39,7 +39,7 @@ EOF ' test_expect_success 't_e_i() exclude sub/sub/file' ' - git log --oneline --format=%s -- . ":(exclude)sub/sub/file" >actual + git log --oneline --format=%s -- . ":(exclude)sub/sub/file" >actual && cat <<EOF >expect && sub2/file sub/sub/sub/file @@ -51,7 +51,7 @@ EOF ' test_expect_success 't_e_i() exclude sub using mnemonic' ' - git log --oneline --format=%s -- . ":!sub" >actual + git log --oneline --format=%s -- . ":!sub" >actual && cat <<EOF >expect && sub2/file file @@ -60,7 +60,7 @@ EOF ' test_expect_success 't_e_i() exclude :(icase)SUB' ' - git log --oneline --format=%s -- . ":(exclude,icase)SUB" >actual + git log --oneline --format=%s -- . ":(exclude,icase)SUB" >actual && cat <<EOF >expect && sub2/file file @@ -71,7 +71,7 @@ EOF test_expect_success 't_e_i() exclude sub2 from sub' ' ( cd sub && - git log --oneline --format=%s -- :/ ":/!sub2" >actual + git log --oneline --format=%s -- :/ ":/!sub2" >actual && cat <<EOF >expect && sub/sub/sub/file sub/file2 @@ -84,7 +84,7 @@ EOF ' test_expect_success 't_e_i() exclude sub/*file' ' - git log --oneline --format=%s -- . ":(exclude)sub/*file" >actual + git log --oneline --format=%s -- . ":(exclude)sub/*file" >actual && cat <<EOF >expect && sub2/file sub/file2 @@ -94,7 +94,7 @@ EOF ' test_expect_success 't_e_i() exclude :(glob)sub/*/file' ' - git log --oneline --format=%s -- . ":(exclude,glob)sub/*/file" >actual + git log --oneline --format=%s -- . ":(exclude,glob)sub/*/file" >actual && cat <<EOF >expect && sub2/file sub/sub/sub/file @@ -106,7 +106,7 @@ EOF ' test_expect_success 'm_p_d() exclude sub' ' - git ls-files -- . ":(exclude)sub" >actual + git ls-files -- . ":(exclude)sub" >actual && cat <<EOF >expect && file sub2/file @@ -115,7 +115,7 @@ EOF ' test_expect_success 'm_p_d() exclude sub/sub/file' ' - git ls-files -- . ":(exclude)sub/sub/file" >actual + git ls-files -- . ":(exclude)sub/sub/file" >actual && cat <<EOF >expect && file sub/file @@ -127,7 +127,7 @@ EOF ' test_expect_success 'm_p_d() exclude sub using mnemonic' ' - git ls-files -- . ":!sub" >actual + git ls-files -- . ":!sub" >actual && cat <<EOF >expect && file sub2/file @@ -136,7 +136,7 @@ EOF ' test_expect_success 'm_p_d() exclude :(icase)SUB' ' - git ls-files -- . ":(exclude,icase)SUB" >actual + git ls-files -- . ":(exclude,icase)SUB" >actual && cat <<EOF >expect && file sub2/file @@ -147,7 +147,7 @@ EOF test_expect_success 'm_p_d() exclude sub2 from sub' ' ( cd sub && - git ls-files -- :/ ":/!sub2" >actual + git ls-files -- :/ ":/!sub2" >actual && cat <<EOF >expect && ../file file @@ -160,7 +160,7 @@ EOF ' test_expect_success 'm_p_d() exclude sub/*file' ' - git ls-files -- . ":(exclude)sub/*file" >actual + git ls-files -- . ":(exclude)sub/*file" >actual && cat <<EOF >expect && file sub/file2 @@ -170,7 +170,7 @@ EOF ' test_expect_success 'm_p_d() exclude :(glob)sub/*/file' ' - git ls-files -- . ":(exclude,glob)sub/*/file" >actual + git ls-files -- . ":(exclude,glob)sub/*/file" >actual && cat <<EOF >expect && file sub/file diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 54b5744cc5..2e2fb0e957 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -194,7 +194,7 @@ test_expect_success '--log=5 with custom comment character' ' ' test_expect_success 'merge.log=0 disables shortlog' ' - echo "Merge branch ${apos}left${apos}" >expected + echo "Merge branch ${apos}left${apos}" >expected && git -c merge.log=0 fmt-merge-msg <.git/FETCH_HEAD >actual && test_cmp expected actual ' diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index bda354c1c4..c66bf7981c 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -334,6 +334,19 @@ test_expect_success 'Check that :track[short] cannot be used with other atoms' ' test_must_fail git for-each-ref --format="%(refname:trackshort)" 2>/dev/null ' +test_expect_success 'Check that :track[short] works when upstream is invalid' ' + cat >expected <<-\EOF && + + + EOF + test_when_finished "git config branch.master.merge refs/heads/master" && + git config branch.master.merge refs/heads/does-not-exist && + git for-each-ref \ + --format="%(upstream:track)$LF%(upstream:trackshort)" \ + refs/heads >actual && + test_cmp expected actual +' + cat >expected <<EOF $(git rev-parse --short HEAD) EOF diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index 69f11bd40d..7b56081137 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -161,10 +161,7 @@ test_expect_success "Michael Cassar's test case" ' git mv papers/unsorted/Thesis.pdf papers/all-papers/moo-blah.pdf && T=`git write-tree` && - git ls-tree -r $T | grep partA/outline.txt || { - git ls-tree -r $T - (exit 1) - } + git ls-tree -r $T | verbose grep partA/outline.txt ' rm -fr papers partA path? diff --git a/t/t7003-filter-branch.sh b/t/t7003-filter-branch.sh index 66643e4bd7..855afda80a 100755 --- a/t/t7003-filter-branch.sh +++ b/t/t7003-filter-branch.sh @@ -394,4 +394,14 @@ test_expect_success 'replace submodule revision' ' test $orig_head != `git show-ref --hash --head HEAD` ' +test_expect_success 'filter commit message without trailing newline' ' + git reset --hard original && + commit=$(printf "no newline" | git commit-tree HEAD^{tree}) && + git update-ref refs/heads/no-newline $commit && + git filter-branch -f refs/heads/no-newline && + echo $commit >expect && + git rev-parse refs/heads/no-newline >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 796e9f79ea..d1ff5c94f2 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1081,7 +1081,7 @@ test_expect_success GPG \ get_tag_header rfc1991-signed-tag $commit commit $time >expect echo "RFC1991 signed tag" >>expect echo '-----BEGIN PGP MESSAGE-----' >>expect -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'creating a signed tag with rfc1991' ' echo "rfc1991" >gpghome/gpg.conf && git tag -s -m "RFC1991 signed tag" rfc1991-signed-tag $commit && @@ -1095,7 +1095,7 @@ cp "$1" actual EOF chmod +x fakeeditor -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'reediting a signed tag body omits signature' ' echo "rfc1991" >gpghome/gpg.conf && echo "RFC1991 signed tag" >expect && @@ -1103,13 +1103,13 @@ test_expect_success GPG \ test_cmp expect actual ' -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'verifying rfc1991 signature' ' echo "rfc1991" >gpghome/gpg.conf && git tag -v rfc1991-signed-tag ' -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'list tag with rfc1991 signature' ' echo "rfc1991" >gpghome/gpg.conf && echo "rfc1991-signed-tag RFC1991 signed tag" >expect && @@ -1123,12 +1123,12 @@ test_expect_success GPG \ rm -f gpghome/gpg.conf -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'verifying rfc1991 signature without --rfc1991' ' git tag -v rfc1991-signed-tag ' -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'list tag with rfc1991 signature without --rfc1991' ' echo "rfc1991-signed-tag RFC1991 signed tag" >expect && git tag -l -n1 rfc1991-signed-tag >actual && @@ -1139,7 +1139,7 @@ test_expect_success GPG \ test_cmp expect actual ' -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'reediting a signed tag body omits signature' ' echo "RFC1991 signed tag" >expect && GIT_EDITOR=./fakeeditor git tag -f -s rfc1991-signed-tag $commit && @@ -1180,8 +1180,8 @@ test_expect_success 'message in editor has initial comment: first line' ' test_expect_success \ 'message in editor has initial comment: remainder' ' # remove commented lines from the remainder -- should be empty - >rest.expect - sed -e 1d -e '/^#/d' <actual >rest.actual && + >rest.expect && + sed -e 1d -e "/^#/d" <actual >rest.actual && test_cmp rest.expect rest.actual ' @@ -1459,14 +1459,42 @@ test_expect_success 'invalid sort parameter in configuratoin' ' test_cmp expect actual ' +test_expect_success 'version sort with prerelease reordering' ' + git config --unset tag.sort && + git config versionsort.prereleaseSuffix -rc && + git tag foo1.6-rc1 && + git tag foo1.6-rc2 && + git tag -l --sort=version:refname "foo*" >actual && + cat >expect <<-\EOF && + foo1.3 + foo1.6-rc1 + foo1.6-rc2 + foo1.6 + foo1.10 + EOF + test_cmp expect actual +' + +test_expect_success 'reverse version sort with prerelease reordering' ' + git tag -l --sort=-version:refname "foo*" >actual && + cat >expect <<-\EOF && + foo1.10 + foo1.6 + foo1.6-rc2 + foo1.6-rc1 + foo1.3 + EOF + test_cmp expect actual +' + run_with_limited_stack () { (ulimit -s 128 && "$@") } -test_lazy_prereq ULIMIT 'run_with_limited_stack true' +test_lazy_prereq ULIMIT_STACK_SIZE 'run_with_limited_stack true' # we require ulimit, this excludes Windows -test_expect_success ULIMIT '--contains works in a deep repo' ' +test_expect_success ULIMIT_STACK_SIZE '--contains works in a deep repo' ' >expect && i=1 && while test $i -lt 8000 diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index da958a8b56..947b690fd7 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -396,7 +396,7 @@ test_expect_success TTY 'command-specific pager overrides core.pager' ' sane_unset PAGER GIT_PAGER && echo "foo:initial" >expect && >actual && - test_config core.pager "exit 1" + test_config core.pager "exit 1" && test_config pager.log "sed s/^/foo:/ >actual" && test_terminal git log --format=%s -1 && test_cmp expect actual diff --git a/t/t7007-show.sh b/t/t7007-show.sh index 1b824fe5ed..42d3db6246 100755 --- a/t/t7007-show.sh +++ b/t/t7007-show.sh @@ -124,4 +124,8 @@ test_expect_success '--quiet suppresses diff' ' test_cmp expect actual ' +test_expect_success 'show --graph is forbidden' ' + test_must_fail git show --graph HEAD +' + test_done diff --git a/t/t7009-filter-branch-null-sha1.sh b/t/t7009-filter-branch-null-sha1.sh index a997f7ac3a..c27f90f285 100755 --- a/t/t7009-filter-branch-null-sha1.sh +++ b/t/t7009-filter-branch-null-sha1.sh @@ -13,7 +13,7 @@ test_expect_success 'setup: a commit with a bogus null sha1 in the tree' ' { git ls-tree HEAD && printf "160000 commit $_z40\\tbroken\\n" - } >broken-tree + } >broken-tree && echo "add broken entry" >msg && tree=$(git mktree <broken-tree) && diff --git a/t/t7061-wtstatus-ignore.sh b/t/t7061-wtstatus-ignore.sh index 460789b4d8..cdc0747bf0 100755 --- a/t/t7061-wtstatus-ignore.sh +++ b/t/t7061-wtstatus-ignore.sh @@ -20,6 +20,15 @@ test_expect_success 'status untracked directory with --ignored' ' test_cmp expected actual ' +test_expect_success 'same with gitignore starting with BOM' ' + printf "\357\273\277ignored\n" >.gitignore && + mkdir -p untracked && + : >untracked/ignored && + : >untracked/uncommitted && + git status --porcelain --ignored >actual && + test_cmp expected actual +' + cat >expected <<\EOF ?? .gitignore ?? actual diff --git a/t/t7201-co.sh b/t/t7201-co.sh index eae9e5a937..885923610a 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -88,14 +88,10 @@ test_expect_success "checkout with unrelated dirty tree without -m" ' git checkout -f master && fill 0 1 2 3 4 5 6 7 8 >same && - cp same kept + cp same kept && git checkout side >messages && - test_cmp same kept - (cat > messages.expect <<EOF -M same -EOF -) && - touch messages.expect && + test_cmp same kept && + printf "M\t%s\n" same >messages.expect && test_cmp messages.expect messages ' @@ -109,10 +105,7 @@ test_expect_success "checkout -m with dirty tree" ' test "$(git symbolic-ref HEAD)" = "refs/heads/side" && - (cat >expect.messages <<EOF -M one -EOF -) && + printf "M\t%s\n" one >expect.messages && test_cmp expect.messages messages && fill "M one" "A three" "D two" >expect.master && @@ -409,12 +402,12 @@ test_expect_success \ test_expect_success \ 'checkout w/autosetupmerge=always sets up tracking' ' + test_when_finished git config branch.autosetupmerge false && git config branch.autosetupmerge always && git checkout master && git checkout -b track2 && test "$(git config branch.track2.remote)" && - test "$(git config branch.track2.merge)" - git config branch.autosetupmerge false' + test "$(git config branch.track2.merge)"' test_expect_success 'checkout w/--track from non-branch HEAD fails' ' git checkout master^0 && @@ -591,7 +584,7 @@ test_expect_success 'checkout --conflict=merge, overriding config' ' ' test_expect_success 'checkout --conflict=diff3' ' - git config --unset merge.conflictstyle + test_unconfig merge.conflictstyle && setup_conflicting_index && echo "none of the above" >sample && echo ourside >expect && diff --git a/t/t7300-clean.sh b/t/t7300-clean.sh index 04118ad75b..99be5d95d0 100755 --- a/t/t7300-clean.sh +++ b/t/t7300-clean.sh @@ -119,10 +119,7 @@ test_expect_success C_LOCALE_OUTPUT 'git clean with relative prefix' ' git clean -n ../src | sed -n -e "s|^Would remove ||p" ) && - test "$would_clean" = ../src/part3.c || { - echo "OOps <$would_clean>" - false - } + verbose test "$would_clean" = ../src/part3.c ' test_expect_success C_LOCALE_OUTPUT 'git clean with absolute path' ' @@ -134,10 +131,7 @@ test_expect_success C_LOCALE_OUTPUT 'git clean with absolute path' ' git clean -n "$(pwd)/../src" | sed -n -e "s|^Would remove ||p" ) && - test "$would_clean" = ../src/part3.c || { - echo "OOps <$would_clean>" - false - } + verbose test "$would_clean" = ../src/part3.c ' test_expect_success 'git clean with out of work tree relative path' ' diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index 7c88245031..540771ca41 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -171,6 +171,23 @@ test_expect_success 'submodule add with ./ in path' ' test_cmp empty untracked ' +test_expect_success 'submodule add with /././ in path' ' + echo "refs/heads/master" >expect && + >empty && + + ( + cd addtest && + git submodule add "$submodurl" dotslashdotsubmod/././frotz/./ && + git submodule init + ) && + + rm -f heads head untracked && + inspect addtest/dotslashdotsubmod/frotz ../../.. && + test_cmp expect heads && + test_cmp expect head && + test_cmp empty untracked +' + test_expect_success 'submodule add with // in path' ' echo "refs/heads/master" >expect && >empty && @@ -749,7 +766,7 @@ test_expect_success 'moving the superproject does not break submodules' ' ( cd addtest && git submodule status >expect - ) + ) && mv addtest addtest2 && ( cd addtest2 && @@ -970,7 +987,7 @@ test_expect_success 'submodule with UTF-8 name' ' test_expect_success 'submodule add clone shallow submodule' ' mkdir super && - pwd=$(pwd) + pwd=$(pwd) && ( cd super && git init && diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index 29d3d2cca0..dda3929d99 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -754,7 +754,7 @@ test_expect_success SYMLINKS 'submodule update can handle symbolic links in pwd' test_expect_success 'submodule update clone shallow submodule' ' git clone cloned super3 && - pwd=$(pwd) + pwd=$(pwd) && (cd super3 && sed -e "s#url = ../#url = file://$pwd/#" <.gitmodules >.gitmodules.tmp && mv -f .gitmodules.tmp .gitmodules && diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 8ed5788808..c3ed7cb51c 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -66,6 +66,12 @@ strip_comments () { rm "$1" && mv "$1".tmp "$1" } +cat >.gitignore <<\EOF +.gitignore +expect* +output* +EOF + test_expect_success 'status --column' ' cat >expect <<\EOF && # On branch master @@ -83,8 +89,8 @@ test_expect_success 'status --column' ' # Untracked files: # (use "git add <file>..." to include in what will be committed) # -# dir1/untracked dir2/untracked output -# dir2/modified expect untracked +# dir1/untracked dir2/untracked +# dir2/modified untracked # EOF COLUMNS=50 git -c status.displayCommentPrefix=true status --column="column dense" >output && @@ -116,8 +122,6 @@ cat >expect <<\EOF # dir1/untracked # dir2/modified # dir2/untracked -# expect -# output # untracked # EOF @@ -133,6 +137,23 @@ test_expect_success 'status with status.displayCommentPrefix=false' ' test_i18ncmp expect output ' +test_expect_success 'status -v' ' + (cat expect && git diff --cached) >expect-with-v && + git status -v >output && + test_i18ncmp expect-with-v output +' + +test_expect_success 'status -v -v' ' + (cat expect && + echo "Changes to be committed:" && + git -c diff.mnemonicprefix=true diff --cached && + echo "--------------------------------------------------" && + echo "Changes not staged for commit:" && + git -c diff.mnemonicprefix=true diff) >expect-with-v && + git status -v -v >output && + test_i18ncmp expect-with-v output +' + test_expect_success 'setup fake editor' ' cat >.git/editor <<-\EOF && #! /bin/sh @@ -167,8 +188,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked EOF @@ -186,8 +205,6 @@ A dir2/added ?? dir1/untracked ?? dir2/modified ?? dir2/untracked -?? expect -?? output ?? untracked EOF @@ -201,7 +218,7 @@ test_expect_success 'status -s' ' test_expect_success 'status with gitignore' ' { echo ".gitignore" && - echo "expect" && + echo "expect*" && echo "output" && echo "untracked" } >.gitignore && @@ -222,6 +239,7 @@ test_expect_success 'status with gitignore' ' !! dir1/untracked !! dir2/untracked !! expect + !! expect-with-v !! output !! untracked EOF @@ -253,6 +271,7 @@ Ignored files: dir1/untracked dir2/untracked expect + expect-with-v output untracked @@ -264,7 +283,7 @@ EOF test_expect_success 'status with gitignore (nothing untracked)' ' { echo ".gitignore" && - echo "expect" && + echo "expect*" && echo "dir2/modified" && echo "output" && echo "untracked" @@ -285,6 +304,7 @@ test_expect_success 'status with gitignore (nothing untracked)' ' !! dir2/modified !! dir2/untracked !! expect + !! expect-with-v !! output !! untracked EOF @@ -312,6 +332,7 @@ Ignored files: dir2/modified dir2/untracked expect + expect-with-v output untracked @@ -320,7 +341,11 @@ EOF test_i18ncmp expect output ' -rm -f .gitignore +cat >.gitignore <<\EOF +.gitignore +expect* +output* +EOF cat >expect <<\EOF ## master @@ -329,8 +354,6 @@ A dir2/added ?? dir1/untracked ?? dir2/modified ?? dir2/untracked -?? expect -?? output ?? untracked EOF @@ -408,7 +431,7 @@ test_expect_success 'status -s -uno' ' ' test_expect_success 'status -s (status.showUntrackedFiles no)' ' - git config status.showuntrackedfiles no + git config status.showuntrackedfiles no && git status -s >output && test_cmp expect output ' @@ -434,8 +457,6 @@ Untracked files: dir2/modified dir2/untracked dir3/ - expect - output untracked EOF @@ -444,7 +465,7 @@ EOF ' test_expect_success 'status (status.showUntrackedFiles normal)' ' - test_config status.showuntrackedfiles normal + test_config status.showuntrackedfiles normal && git status >output && test_i18ncmp expect output ' @@ -456,8 +477,6 @@ A dir2/added ?? dir2/modified ?? dir2/untracked ?? dir3/ -?? expect -?? output ?? untracked EOF test_expect_success 'status -s -unormal' ' @@ -466,7 +485,7 @@ test_expect_success 'status -s -unormal' ' ' test_expect_success 'status -s (status.showUntrackedFiles normal)' ' - git config status.showuntrackedfiles normal + git config status.showuntrackedfiles normal && git status -s >output && test_cmp expect output ' @@ -493,8 +512,6 @@ Untracked files: dir2/untracked dir3/untracked1 dir3/untracked2 - expect - output untracked EOF @@ -503,7 +520,7 @@ EOF ' test_expect_success 'status (status.showUntrackedFiles all)' ' - test_config status.showuntrackedfiles all + test_config status.showuntrackedfiles all && git status >output && test_i18ncmp expect output ' @@ -518,12 +535,10 @@ A dir2/added ?? dir1/untracked ?? dir2/modified ?? dir2/untracked -?? expect -?? output ?? untracked EOF test_expect_success 'status -s -uall' ' - git config --unset status.showuntrackedfiles + test_unconfig status.showuntrackedfiles && git status -s -uall >output && test_cmp expect output ' @@ -554,8 +569,6 @@ Untracked files: untracked ../dir2/modified ../dir2/untracked - ../expect - ../output ../untracked EOF @@ -569,8 +582,6 @@ A ../dir2/added ?? untracked ?? ../dir2/modified ?? ../dir2/untracked -?? ../expect -?? ../output ?? ../untracked EOF test_expect_success 'status -s with relative paths' ' @@ -586,8 +597,6 @@ A dir2/added ?? dir1/untracked ?? dir2/modified ?? dir2/untracked -?? expect -?? output ?? untracked EOF @@ -625,8 +634,6 @@ Untracked files: <BLUE>dir1/untracked<RESET> <BLUE>dir2/modified<RESET> <BLUE>dir2/untracked<RESET> - <BLUE>expect<RESET> - <BLUE>output<RESET> <BLUE>untracked<RESET> EOF @@ -647,8 +654,6 @@ cat >expect <<\EOF <BLUE>??<RESET> dir1/untracked <BLUE>??<RESET> dir2/modified <BLUE>??<RESET> dir2/untracked -<BLUE>??<RESET> expect -<BLUE>??<RESET> output <BLUE>??<RESET> untracked EOF @@ -676,8 +681,6 @@ cat >expect <<\EOF <BLUE>??<RESET> dir1/untracked <BLUE>??<RESET> dir2/modified <BLUE>??<RESET> dir2/untracked -<BLUE>??<RESET> expect -<BLUE>??<RESET> output <BLUE>??<RESET> untracked EOF @@ -694,8 +697,6 @@ A dir2/added ?? dir1/untracked ?? dir2/modified ?? dir2/untracked -?? expect -?? output ?? untracked EOF @@ -755,8 +756,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked EOF @@ -772,8 +771,6 @@ A dir2/added ?? dir1/untracked ?? dir2/modified ?? dir2/untracked -?? expect -?? output ?? untracked EOF @@ -798,8 +795,6 @@ Untracked files: dir1/untracked dir2/ - expect - output untracked EOF @@ -848,8 +843,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked EOF @@ -870,8 +863,6 @@ A sm ?? dir1/untracked ?? dir2/modified ?? dir2/untracked -?? expect -?? output ?? untracked EOF test_expect_success 'status -s submodule summary is disabled by default' ' @@ -913,8 +904,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked EOF @@ -940,8 +929,6 @@ A sm ?? dir1/untracked ?? dir2/modified ?? dir2/untracked -?? expect -?? output ?? untracked EOF test_expect_success 'status -s submodule summary' ' @@ -964,8 +951,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked no changes added to commit (use "git add" and/or "git commit -a") @@ -983,8 +968,6 @@ cat >expect <<EOF ?? dir1/untracked ?? dir2/modified ?? dir2/untracked -?? expect -?? output ?? untracked EOF test_expect_success 'status -s submodule summary (clean submodule)' ' @@ -1025,8 +1008,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked EOF @@ -1080,8 +1061,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked EOF @@ -1192,8 +1171,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked EOF @@ -1254,8 +1231,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked EOF @@ -1336,8 +1311,6 @@ cat > expect << EOF ; dir1/untracked ; dir2/modified ; dir2/untracked -; expect -; output ; untracked ; EOF @@ -1369,8 +1342,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked no changes added to commit (use "git add" and/or "git commit -a") @@ -1400,8 +1371,6 @@ Untracked files: dir1/untracked dir2/modified dir2/untracked - expect - output untracked EOF diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 474dab381a..13331e533b 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -42,7 +42,7 @@ test_expect_success GPG 'create signed commits' ' git tag seventh-unsigned && test_tick && git rebase -f HEAD^^ && git tag sixth-signed HEAD^ && - git tag seventh-signed + git tag seventh-signed && echo 8 >file && test_tick && git commit -a -m eighth -SB7227189 && git tag eighth-signed-alt @@ -86,8 +86,8 @@ test_expect_success GPG 'show signed commit with signature' ' git show -s --show-signature initial >show && git verify-commit -v initial >verify.1 2>verify.2 && git cat-file commit initial >cat && - grep -v "gpg: " show >show.commit && - grep "gpg: " show >show.gpg && + grep -v -e "gpg: " -e "Warning: " show >show.commit && + grep -e "gpg: " -e "Warning: " show >show.gpg && grep -v "^ " cat | grep -v "^gpgsig " >cat.commit && test_cmp show.commit commit && test_cmp show.gpg verify.2 && diff --git a/t/t7513-interpret-trailers.sh b/t/t7513-interpret-trailers.sh index 1efb88051a..bd0ab46750 100755 --- a/t/t7513-interpret-trailers.sh +++ b/t/t7513-interpret-trailers.sh @@ -213,7 +213,7 @@ test_expect_success 'with 2 files arguments' ' ' test_expect_success 'with message that has comments' ' - cat basic_message >>message_with_comments && + cat basic_message >message_with_comments && sed -e "s/ Z\$/ /" >>message_with_comments <<-\EOF && # comment @@ -232,12 +232,44 @@ test_expect_success 'with message that has comments' ' Reviewed-by: Johan Cc: Peff + # last comment + EOF cat basic_patch >>expected && git interpret-trailers --trim-empty --trailer "Cc: Peff" message_with_comments >actual && test_cmp expected actual ' +test_expect_success 'with message that has an old style conflict block' ' + cat basic_message >message_with_comments && + sed -e "s/ Z\$/ /" >>message_with_comments <<-\EOF && + # comment + + # other comment + Cc: Z + # yet another comment + Reviewed-by: Johan + Reviewed-by: Z + # last comment + + Conflicts: + + EOF + cat basic_message >expected && + cat >>expected <<-\EOF && + # comment + + Reviewed-by: Johan + Cc: Peff + # last comment + + Conflicts: + + EOF + git interpret-trailers --trim-empty --trailer "Cc: Peff" message_with_comments >actual && + test_cmp expected actual +' + test_expect_success 'with commit complex message and trailer args' ' cat complex_message_body >expected && sed -e "s/ Z\$/ /" >>expected <<-\EOF && diff --git a/t/t7516-commit-races.sh b/t/t7516-commit-races.sh new file mode 100755 index 0000000000..f2ce14e907 --- /dev/null +++ b/t/t7516-commit-races.sh @@ -0,0 +1,30 @@ +#!/bin/sh + +test_description='git commit races' +. ./test-lib.sh + +test_expect_success 'race to create orphan commit' ' + write_script hare-editor <<-\EOF && + git commit --allow-empty -m hare + EOF + test_must_fail env EDITOR=./hare-editor git commit --allow-empty -m tortoise -e && + git show -s --pretty=format:%s >subject && + grep hare subject && + test -z "$(git show -s --pretty=format:%P)" +' + +test_expect_success 'race to create non-orphan commit' ' + write_script airplane-editor <<-\EOF && + git commit --allow-empty -m airplane + EOF + git checkout --orphan branch && + git commit --allow-empty -m base && + git rev-parse HEAD >base && + test_must_fail env EDITOR=./airplane-editor git commit --allow-empty -m ship -e && + git show -s --pretty=format:%s >subject && + grep airplane subject && + git rev-parse HEAD^ >parent && + test_cmp base parent +' + +test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index b16462132f..75c50eea15 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -133,7 +133,7 @@ test_expect_success 'setup' ' test_tick && git commit -m "commit 3" && git tag c3 && - c3=$(git rev-parse HEAD) + c3=$(git rev-parse HEAD) && git reset --hard "$c0" && create_merge_msgs ' diff --git a/t/t7601-merge-pull-config.sh b/t/t7601-merge-pull-config.sh index f768c900ab..c6c44ec570 100755 --- a/t/t7601-merge-pull-config.sh +++ b/t/t7601-merge-pull-config.sh @@ -45,6 +45,14 @@ test_expect_success 'fast-forward pull succeeds with "true" in pull.ff' ' test "$(git rev-parse HEAD)" = "$(git rev-parse c1)" ' +test_expect_success 'pull.ff=true overrides merge.ff=false' ' + git reset --hard c0 && + test_config merge.ff false && + test_config pull.ff true && + git pull . c1 && + test "$(git rev-parse HEAD)" = "$(git rev-parse c1)" +' + test_expect_success 'fast-forward pull creates merge with "false" in pull.ff' ' git reset --hard c0 && test_config pull.ff false && diff --git a/t/t7612-merge-verify-signatures.sh b/t/t7612-merge-verify-signatures.sh index 21a0bf8fb8..8ae69a61c3 100755 --- a/t/t7612-merge-verify-signatures.sh +++ b/t/t7612-merge-verify-signatures.sh @@ -29,7 +29,7 @@ test_expect_success GPG 'create signed commits' ' git checkout -b side-untrusted && echo 3 >baz && git add baz && - test_tick && git commit -SB7227189 -m "untrusted on side" + test_tick && git commit -SB7227189 -m "untrusted on side" && git checkout master ' diff --git a/t/t7701-repack-unpack-unreachable.sh b/t/t7701-repack-unpack-unreachable.sh index aad8a9c64d..b66e383866 100755 --- a/t/t7701-repack-unpack-unreachable.sh +++ b/t/t7701-repack-unpack-unreachable.sh @@ -57,7 +57,7 @@ compare_mtimes () { read tref rest && while read t rest; do - test "$tref" = "$t" || break + test "$tref" = "$t" || return 1 done } diff --git a/t/t8003-blame-corner-cases.sh b/t/t8003-blame-corner-cases.sh index 2a3469bcbe..16f1442c1e 100755 --- a/t/t8003-blame-corner-cases.sh +++ b/t/t8003-blame-corner-cases.sh @@ -26,7 +26,7 @@ test_expect_success setup ' cat one >uno && mv two dos && cat one >>tres && - echo DEF >>mouse + echo DEF >>mouse && git add uno dos tres mouse && test_tick && GIT_AUTHOR_NAME=Second git commit -a -m Second && @@ -153,15 +153,15 @@ test_expect_success 'blame path that used to be a directory' ' ' test_expect_success 'blame to a commit with no author name' ' - TREE=`git rev-parse HEAD:` - cat >badcommit <<EOF + TREE=`git rev-parse HEAD:` && + cat >badcommit <<EOF && tree $TREE author <noname> 1234567890 +0000 committer David Reiss <dreiss@facebook.com> 1234567890 +0000 some message EOF - COMMIT=`git hash-object -t commit -w badcommit` + COMMIT=`git hash-object -t commit -w badcommit` && git --no-pager blame $COMMIT -- uno >/dev/null ' @@ -191,12 +191,24 @@ test_expect_success 'indent of line numbers, ten lines' ' test $(grep -c " " actual) = 9 ' -test_expect_success 'blaming files with CRLF newlines' ' +test_expect_success 'setup file with CRLF newlines' ' git config core.autocrlf false && - printf "testcase\r\n" >crlffile && + printf "testcase\n" >crlffile && git add crlffile && git commit -m testcase && - git -c core.autocrlf=input blame crlffile >actual && + printf "testcase\r\n" >crlffile +' + +test_expect_success 'blame file with CRLF core.autocrlf true' ' + git config core.autocrlf true && + git blame crlffile >actual && + grep "A U Thor" actual +' + +test_expect_success 'blame file with CRLF attributes text' ' + git config core.autocrlf false && + echo "crlffile text" >.gitattributes && + git blame crlffile >actual && grep "A U Thor" actual ' diff --git a/t/t8008-blame-formats.sh b/t/t8008-blame-formats.sh index d15f8b3d47..29f84a6dd1 100755 --- a/t/t8008-blame-formats.sh +++ b/t/t8008-blame-formats.sh @@ -5,7 +5,7 @@ test_description='blame output in various formats on a simple case' test_expect_success 'setup' ' echo a >file && - git add file + git add file && test_tick && git commit -m one && echo b >>file && diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 19a3ced600..7be14a4e37 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -6,35 +6,37 @@ test_description='git send-email' # May be altered later in the test PREREQ="PERL" -test_expect_success $PREREQ \ - 'prepare reference tree' \ - 'echo "1A quick brown fox jumps over the" >file && - echo "lazy dog" >>file && - git add file && - GIT_AUTHOR_NAME="A" git commit -a -m "Initial."' - -test_expect_success $PREREQ \ - 'Setup helper tool' \ - '(echo "#!$SHELL_PATH" - echo shift - echo output=1 - echo "while test -f commandline\$output; do output=\$((\$output+1)); done" - echo for a - echo do - echo " echo \"!\$a!\"" - echo "done >commandline\$output" - echo "cat > msgtxt\$output" - ) >fake.sendmail && - chmod +x ./fake.sendmail && - git add fake.sendmail && - GIT_AUTHOR_NAME="A" git commit -a -m "Second."' - -clean_fake_sendmail() { +test_expect_success $PREREQ 'prepare reference tree' ' + echo "1A quick brown fox jumps over the" >file && + echo "lazy dog" >>file && + git add file && + GIT_AUTHOR_NAME="A" git commit -a -m "Initial." +' + +test_expect_success $PREREQ 'Setup helper tool' ' + write_script fake.sendmail <<-\EOF && + shift + output=1 + while test -f commandline$output + do + output=$(($output+1)) + done + for a + do + echo "!$a!" + done >commandline$output + cat >"msgtxt$output" + EOF + git add fake.sendmail && + GIT_AUTHOR_NAME="A" git commit -a -m "Second." +' + +clean_fake_sendmail () { rm -f commandline* msgtxt* } test_expect_success $PREREQ 'Extract patches' ' - patches=`git format-patch -s --cc="One <one@example.com>" --cc=two@example.com -n HEAD^1` + patches=`git format-patch -s --cc="One <one@example.com>" --cc=two@example.com -n HEAD^1` ' # Test no confirm early to ensure remaining tests will not hang @@ -47,9 +49,9 @@ test_no_confirm () { --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ $@ \ - $patches > stdout && + $patches >stdout && test_must_fail grep "Send this email" stdout && - > no_confirm_okay + >no_confirm_okay } # Exit immediately to prevent hang if a no-confirm test fails @@ -82,61 +84,61 @@ test_expect_success $PREREQ 'No confirm with sendemail.confirm=never' ' ' test_expect_success $PREREQ 'Send patches' ' - git send-email --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors + git send-email --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<\EOF -!nobody@example.com! -!author@example.com! -!one@example.com! -!two@example.com! -EOF + cat >expected <<-\EOF + !nobody@example.com! + !author@example.com! + !one@example.com! + !two@example.com! + EOF ' -test_expect_success $PREREQ \ - 'Verify commandline' \ - 'test_cmp expected commandline1' +test_expect_success $PREREQ 'Verify commandline' ' + test_cmp expected commandline1 +' test_expect_success $PREREQ 'Send patches with --envelope-sender' ' - clean_fake_sendmail && - git send-email --envelope-sender="Patch Contributor <patch@example.com>" --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors + clean_fake_sendmail && + git send-email --envelope-sender="Patch Contributor <patch@example.com>" --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<\EOF -!patch@example.com! -!-i! -!nobody@example.com! -!author@example.com! -!one@example.com! -!two@example.com! -EOF + cat >expected <<-\EOF + !patch@example.com! + !-i! + !nobody@example.com! + !author@example.com! + !one@example.com! + !two@example.com! + EOF ' -test_expect_success $PREREQ \ - 'Verify commandline' \ - 'test_cmp expected commandline1' +test_expect_success $PREREQ 'Verify commandline' ' + test_cmp expected commandline1 +' test_expect_success $PREREQ 'Send patches with --envelope-sender=auto' ' - clean_fake_sendmail && - git send-email --envelope-sender=auto --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors + clean_fake_sendmail && + git send-email --envelope-sender=auto --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<\EOF -!nobody@example.com! -!-i! -!nobody@example.com! -!author@example.com! -!one@example.com! -!two@example.com! -EOF + cat >expected <<-\EOF + !nobody@example.com! + !-i! + !nobody@example.com! + !author@example.com! + !one@example.com! + !two@example.com! + EOF ' -test_expect_success $PREREQ \ - 'Verify commandline' \ - 'test_cmp expected commandline1' +test_expect_success $PREREQ 'Verify commandline' ' + test_cmp expected commandline1 +' test_expect_success $PREREQ 'setup expect' " cat >expected-show-all-headers <<\EOF @@ -240,6 +242,13 @@ test_expect_success $PREREQ 'non-ascii self name is suppressed' " 'non_ascii_self_suppressed' " +# This name is long enough to force format-patch to split it into multiple +# encoded-words, assuming it uses UTF-8 with the "Q" encoding. +test_expect_success $PREREQ 'long non-ascii self name is suppressed' " + test_suppress_self_quoted 'Ƒüñníęř €. Nâṁé' 'odd_?=mail@example.com' \ + 'long_non_ascii_self_suppressed' +" + test_expect_success $PREREQ 'sanitized self name is suppressed' " test_suppress_self_unquoted '\"A U. Thor\"' 'author@example.com' \ 'self_name_sanitized_suppressed' @@ -307,11 +316,9 @@ test_expect_success $PREREQ 'tocmd works' ' clean_fake_sendmail && cp $patches tocmd.patch && echo tocmd--tocmd@example.com >>tocmd.patch && - { - echo "#!$SHELL_PATH" - echo sed -n -e s/^tocmd--//p \"\$1\" - } > tocmd-sed && - chmod +x tocmd-sed && + write_script tocmd-sed <<-\EOF && + sed -n -e "s/^tocmd--//p" "$1" + EOF git send-email \ --from="Example <nobody@example.com>" \ --to-cmd=./tocmd-sed \ @@ -325,11 +332,9 @@ test_expect_success $PREREQ 'cccmd works' ' clean_fake_sendmail && cp $patches cccmd.patch && echo "cccmd-- cccmd@example.com" >>cccmd.patch && - { - echo "#!$SHELL_PATH" - echo sed -n -e s/^cccmd--//p \"\$1\" - } > cccmd-sed && - chmod +x cccmd-sed && + write_script cccmd-sed <<-\EOF && + sed -n -e "s/^cccmd--//p" "$1" + EOF git send-email \ --from="Example <nobody@example.com>" \ --to=nobody@example.com \ @@ -367,7 +372,7 @@ test_expect_success $PREREQ 'Author From: in message body' ' --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ $patches && - sed "1,/^\$/d" < msgtxt1 > msgbody1 && + sed "1,/^\$/d" <msgtxt1 >msgbody1 && grep "From: A <author@example.com>" msgbody1 ' @@ -378,7 +383,7 @@ test_expect_success $PREREQ 'Author From: not in message body' ' --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ $patches && - sed "1,/^\$/d" < msgtxt1 > msgbody1 && + sed "1,/^\$/d" <msgtxt1 >msgbody1 && ! grep "From: A <author@example.com>" msgbody1 ' @@ -387,7 +392,7 @@ test_expect_success $PREREQ 'allow long lines with --no-validate' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ - --novalidate \ + --no-validate \ $patches longline.patch \ 2>errors ' @@ -421,7 +426,7 @@ test_expect_success $PREREQ 'In-Reply-To without --chain-reply-to' ' git send-email \ --from="Example <nobody@example.com>" \ --to=nobody@example.com \ - --nochain-reply-to \ + --no-chain-reply-to \ --in-reply-to="$(cat expect)" \ --smtp-server="$(pwd)/fake.sendmail" \ $patches $patches $patches \ @@ -459,10 +464,9 @@ test_expect_success $PREREQ 'In-Reply-To with --chain-reply-to' ' ' test_expect_success $PREREQ 'setup fake editor' ' - (echo "#!$SHELL_PATH" && - echo "echo fake edit >>\"\$1\"" - ) >fake-editor && - chmod +x fake-editor + write_script fake-editor <<-\EOF + echo fake edit >>"$1" + EOF ' test_set_editor "$(pwd)/fake-editor" @@ -598,8 +602,9 @@ EOF " test_expect_success $PREREQ 'sendemail.cccmd' ' - echo echo cc-cmd@example.com > cccmd && - chmod +x cccmd && + write_script cccmd <<-\EOF && + echo cc-cmd@example.com + EOF git config sendemail.cccmd ./cccmd && test_suppression cccmd ' @@ -792,7 +797,7 @@ test_confirm () { --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ - $@ $patches > stdout && + $@ $patches >stdout && grep "Send this email" stdout } @@ -813,25 +818,19 @@ test_expect_success $PREREQ '--confirm=compose' ' ' test_expect_success $PREREQ 'confirm by default (due to cc)' ' - CONFIRM=$(git config --get sendemail.confirm) && + test_when_finished git config sendemail.confirm never && git config --unset sendemail.confirm && test_confirm - ret="$?" - git config sendemail.confirm ${CONFIRM:-never} - test $ret = "0" ' test_expect_success $PREREQ 'confirm by default (due to --compose)' ' - CONFIRM=$(git config --get sendemail.confirm) && + test_when_finished git config sendemail.confirm never && git config --unset sendemail.confirm && test_confirm --suppress-cc=all --compose - ret="$?" - git config sendemail.confirm ${CONFIRM:-never} - test $ret = "0" ' test_expect_success $PREREQ 'confirm detects EOF (inform assumes y)' ' - CONFIRM=$(git config --get sendemail.confirm) && + test_when_finished git config sendemail.confirm never && git config --unset sendemail.confirm && rm -fr outdir && git format-patch -2 -o outdir && @@ -840,14 +839,11 @@ test_expect_success $PREREQ 'confirm detects EOF (inform assumes y)' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ - outdir/*.patch < /dev/null - ret="$?" - git config sendemail.confirm ${CONFIRM:-never} - test $ret = "0" + outdir/*.patch </dev/null ' test_expect_success $PREREQ 'confirm detects EOF (auto causes failure)' ' - CONFIRM=$(git config --get sendemail.confirm) && + test_when_finished git config sendemail.confirm never && git config sendemail.confirm auto && GIT_SEND_EMAIL_NOTTY=1 && export GIT_SEND_EMAIL_NOTTY && @@ -855,14 +851,11 @@ test_expect_success $PREREQ 'confirm detects EOF (auto causes failure)' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ - $patches < /dev/null - ret="$?" - git config sendemail.confirm ${CONFIRM:-never} - test $ret = "0" + $patches </dev/null ' test_expect_success $PREREQ 'confirm does not loop forever' ' - CONFIRM=$(git config --get sendemail.confirm) && + test_when_finished git config sendemail.confirm never && git config sendemail.confirm auto && GIT_SEND_EMAIL_NOTTY=1 && export GIT_SEND_EMAIL_NOTTY && @@ -871,9 +864,6 @@ test_expect_success $PREREQ 'confirm does not loop forever' ' --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ $patches - ret="$?" - git config sendemail.confirm ${CONFIRM:-never} - test $ret = "0" ' test_expect_success $PREREQ 'utf8 Cc is rfc2047 encoded' ' @@ -891,39 +881,39 @@ test_expect_success $PREREQ 'utf8 Cc is rfc2047 encoded' ' test_expect_success $PREREQ '--compose adds MIME for utf8 body' ' clean_fake_sendmail && - (echo "#!$SHELL_PATH" && - echo "echo utf8 body: àéìöú >>\"\$1\"" - ) >fake-editor-utf8 && - chmod +x fake-editor-utf8 && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ - git send-email \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8 <<-\EOF && + echo "utf8 body: àéìöú" >>"$1" + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ + git send-email \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=UTF-8" msgtxt1 ' test_expect_success $PREREQ '--compose respects user mime type' ' clean_fake_sendmail && - (echo "#!$SHELL_PATH" && - echo "(echo MIME-Version: 1.0" - echo " echo Content-Type: text/plain\\; charset=iso-8859-1" - echo " echo Content-Transfer-Encoding: 8bit" - echo " echo Subject: foo" - echo " echo " - echo " echo utf8 body: àéìöú) >\"\$1\"" - ) >fake-editor-utf8-mime && - chmod +x fake-editor-utf8-mime && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8-mime\"" \ - git send-email \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8-mime <<-\EOF && + cat >"$1" <<-\EOM + MIME-Version: 1.0 + Content-Type: text/plain; charset=iso-8859-1 + Content-Transfer-Encoding: 8bit + Subject: foo + + utf8 body: àéìöú + EOM + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8-mime\"" \ + git send-email \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=iso-8859-1" msgtxt1 && ! grep "^Content-Type: text/plain; charset=UTF-8" msgtxt1 @@ -931,13 +921,13 @@ test_expect_success $PREREQ '--compose respects user mime type' ' test_expect_success $PREREQ '--compose adds MIME for utf8 subject' ' clean_fake_sendmail && - GIT_EDITOR="\"$(pwd)/fake-editor\"" \ - git send-email \ - --compose --subject utf8-sübjëct \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + GIT_EDITOR="\"$(pwd)/fake-editor\"" \ + git send-email \ + --compose --subject utf8-sübjëct \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^fake edit" msgtxt1 && grep "^Subject: =?UTF-8?q?utf8-s=C3=BCbj=C3=ABct?=" msgtxt1 ' @@ -949,9 +939,9 @@ test_expect_success $PREREQ 'utf8 author is correctly passed on' ' git commit --amend --author "Füñný Nâmé <odd_?=mail@example.com>" && git format-patch --stdout -1 >funny_name.patch && git send-email --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - funny_name.patch && + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + funny_name.patch && grep "^From: Füñný Nâmé <odd_?=mail@example.com>" msgtxt1 ' @@ -962,9 +952,9 @@ test_expect_success $PREREQ 'utf8 sender is not duplicated' ' git commit --amend --author "Füñný Nâmé <odd_?=mail@example.com>" && git format-patch --stdout -1 >funny_name.patch && git send-email --from="Füñný Nâmé <odd_?=mail@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - funny_name.patch && + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + funny_name.patch && grep "^From: " msgtxt1 >msgfrom && test_line_count = 1 msgfrom ' @@ -972,35 +962,33 @@ test_expect_success $PREREQ 'utf8 sender is not duplicated' ' test_expect_success $PREREQ 'sendemail.composeencoding works' ' clean_fake_sendmail && git config sendemail.composeencoding iso-8859-1 && - (echo "#!$SHELL_PATH" && - echo "echo utf8 body: àéìöú >>\"\$1\"" - ) >fake-editor-utf8 && - chmod +x fake-editor-utf8 && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ - git send-email \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8 <<-\EOF && + echo "utf8 body: àéìöú" >>"$1" + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ + git send-email \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=iso-8859-1" msgtxt1 ' test_expect_success $PREREQ '--compose-encoding works' ' clean_fake_sendmail && - (echo "#!$SHELL_PATH" && - echo "echo utf8 body: àéìöú >>\"\$1\"" - ) >fake-editor-utf8 && - chmod +x fake-editor-utf8 && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ - git send-email \ - --compose-encoding iso-8859-1 \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8 <<-\EOF && + echo "utf8 body: àéìöú" >>"$1" + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ + git send-email \ + --compose-encoding iso-8859-1 \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=iso-8859-1" msgtxt1 ' @@ -1008,38 +996,37 @@ test_expect_success $PREREQ '--compose-encoding works' ' test_expect_success $PREREQ '--compose-encoding overrides sendemail.composeencoding' ' clean_fake_sendmail && git config sendemail.composeencoding iso-8859-1 && - (echo "#!$SHELL_PATH" && - echo "echo utf8 body: àéìöú >>\"\$1\"" - ) >fake-editor-utf8 && - chmod +x fake-editor-utf8 && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ - git send-email \ - --compose-encoding iso-8859-2 \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8 <<-\EOF && + echo "utf8 body: àéìöú" >>"$1" + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ + git send-email \ + --compose-encoding iso-8859-2 \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=iso-8859-2" msgtxt1 ' test_expect_success $PREREQ '--compose-encoding adds correct MIME for subject' ' clean_fake_sendmail && - GIT_EDITOR="\"$(pwd)/fake-editor\"" \ - git send-email \ - --compose-encoding iso-8859-2 \ - --compose --subject utf8-sübjëct \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + GIT_EDITOR="\"$(pwd)/fake-editor\"" \ + git send-email \ + --compose-encoding iso-8859-2 \ + --compose --subject utf8-sübjëct \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^fake edit" msgtxt1 && grep "^Subject: =?iso-8859-2?q?utf8-s=C3=BCbj=C3=ABct?=" msgtxt1 ' test_expect_success $PREREQ 'detects ambiguous reference/file conflict' ' - echo master > master && + echo master >master && git add master && git commit -m"add master" && test_must_fail git send-email --dry-run master 2>errors && @@ -1050,10 +1037,10 @@ test_expect_success $PREREQ 'feed two files' ' rm -fr outdir && git format-patch -2 -o outdir && git send-email \ - --dry-run \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - outdir/000?-*.patch 2>errors >out && + --dry-run \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + outdir/000?-*.patch 2>errors >out && grep "^Subject: " out >subjects && test "z$(sed -n -e 1p subjects)" = "zSubject: [PATCH 1/2] Second." && test "z$(sed -n -e 2p subjects)" = "zSubject: [PATCH 2/2] add master" @@ -1065,7 +1052,7 @@ test_expect_success $PREREQ 'in-reply-to but no threading' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --in-reply-to="<in-reply-id@example.com>" \ - --nothread \ + --no-thread \ $patches | grep "In-Reply-To: <in-reply-id@example.com>" ' @@ -1075,7 +1062,7 @@ test_expect_success $PREREQ 'no in-reply-to and no threading' ' --dry-run \ --from="Example <nobody@example.com>" \ --to=nobody@example.com \ - --nothread \ + --no-thread \ $patches $patches >stdout && ! grep "In-Reply-To: " stdout ' @@ -1086,7 +1073,7 @@ test_expect_success $PREREQ 'threading but no chain-reply-to' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --thread \ - --nochain-reply-to \ + --no-chain-reply-to \ $patches $patches >stdout && grep "In-Reply-To: " stdout ' @@ -1197,7 +1184,7 @@ test_expect_success $PREREQ 'To headers from files reset each patch' ' ' test_expect_success $PREREQ 'setup expect' ' -cat >email-using-8bit <<EOF +cat >email-using-8bit <<\EOF From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 Message-Id: <bogus-message-id@example.com> From: author@example.com @@ -1209,9 +1196,7 @@ EOF ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<EOF -Subject: subject goes here -EOF + echo "Subject: subject goes here" >expected ' test_expect_success $PREREQ 'ASCII subject is not RFC2047 quoted' ' @@ -1226,11 +1211,11 @@ test_expect_success $PREREQ 'ASCII subject is not RFC2047 quoted' ' ' test_expect_success $PREREQ 'setup expect' ' -cat >content-type-decl <<EOF -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -EOF + cat >content-type-decl <<-\EOF + MIME-Version: 1.0 + Content-Type: text/plain; charset=UTF-8 + Content-Transfer-Encoding: 8bit + EOF ' test_expect_success $PREREQ 'asks about and fixes 8bit encodings' ' @@ -1270,21 +1255,21 @@ test_expect_success $PREREQ '--8bit-encoding overrides sendemail.8bitEncoding' ' ' test_expect_success $PREREQ 'setup expect' ' -cat >email-using-8bit <<EOF -From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 -Message-Id: <bogus-message-id@example.com> -From: author@example.com -Date: Sat, 12 Jun 2010 15:53:58 +0200 -Subject: Dieser Betreff enthält auch einen Umlaut! - -Nothing to see here. -EOF + cat >email-using-8bit <<-\EOF + From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 + Message-Id: <bogus-message-id@example.com> + From: author@example.com + Date: Sat, 12 Jun 2010 15:53:58 +0200 + Subject: Dieser Betreff enthält auch einen Umlaut! + + Nothing to see here. + EOF ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<EOF -Subject: =?UTF-8?q?Dieser=20Betreff=20enth=C3=A4lt=20auch=20einen=20Umlaut!?= -EOF + cat >expected <<-\EOF + Subject: =?UTF-8?q?Dieser=20Betreff=20enth=C3=A4lt=20auch=20einen=20Umlaut!?= + EOF ' test_expect_success $PREREQ '--8bit-encoding also treats subject' ' @@ -1298,6 +1283,163 @@ test_expect_success $PREREQ '--8bit-encoding also treats subject' ' test_cmp expected actual ' +test_expect_success $PREREQ 'setup expect' ' + cat >email-using-8bit <<-\EOF + From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 + Message-Id: <bogus-message-id@example.com> + From: A U Thor <author@example.com> + Date: Sat, 12 Jun 2010 15:53:58 +0200 + Content-Type: text/plain; charset=UTF-8 + Subject: Nothing to see here. + + Dieser Betreff enthält auch einen Umlaut! + EOF +' + +test_expect_success $PREREQ 'sendemail.transferencoding=7bit fails on 8bit data' ' + clean_fake_sendmail && + git config sendemail.transferEncoding 7bit && + test_must_fail git send-email \ + --transfer-encoding=7bit \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + grep "cannot send message as 7bit" errors && + test -z "$(ls msgtxt*)" +' + +test_expect_success $PREREQ '--transfer-encoding overrides sendemail.transferEncoding' ' + clean_fake_sendmail && + git config sendemail.transferEncoding 8bit && + test_must_fail git send-email \ + --transfer-encoding=7bit \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + grep "cannot send message as 7bit" errors && + test -z "$(ls msgtxt*)" +' + +test_expect_success $PREREQ 'sendemail.transferencoding=8bit' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=8bit \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + sed '1,/^$/d' email-using-8bit >expected && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' ' + cat >expected <<-\EOF + Dieser Betreff enth=C3=A4lt auch einen Umlaut! + EOF +' + +test_expect_success $PREREQ '8-bit and sendemail.transferencoding=quoted-printable' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=quoted-printable \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' ' + cat >expected <<-\EOF + RGllc2VyIEJldHJlZmYgZW50aMOkbHQgYXVjaCBlaW5lbiBVbWxhdXQhCg== + EOF +' + +test_expect_success $PREREQ '8-bit and sendemail.transferencoding=base64' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=base64 \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' ' + cat >email-using-qp <<-\EOF + From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 + Message-Id: <bogus-message-id@example.com> + From: A U Thor <author@example.com> + Date: Sat, 12 Jun 2010 15:53:58 +0200 + MIME-Version: 1.0 + Content-Transfer-Encoding: quoted-printable + Content-Type: text/plain; charset=UTF-8 + Subject: Nothing to see here. + + Dieser Betreff enth=C3=A4lt auch einen Umlaut! + EOF +' + +test_expect_success $PREREQ 'convert from quoted-printable to base64' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=base64 \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-qp \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' " +tr -d '\\015' | tr '%' '\\015' >email-using-crlf <<EOF +From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 +Message-Id: <bogus-message-id@example.com> +From: A U Thor <author@example.com> +Date: Sat, 12 Jun 2010 15:53:58 +0200 +Content-Type: text/plain; charset=UTF-8 +Subject: Nothing to see here. + +Look, I have a CRLF and an = sign!% +EOF +" + +test_expect_success $PREREQ 'setup expect' ' + cat >expected <<-\EOF + Look, I have a CRLF and an =3D sign!=0D + EOF +' + +test_expect_success $PREREQ 'CRLF and sendemail.transferencoding=quoted-printable' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=quoted-printable \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-crlf \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' ' + cat >expected <<-\EOF + TG9vaywgSSBoYXZlIGEgQ1JMRiBhbmQgYW4gPSBzaWduIQ0K + EOF +' + +test_expect_success $PREREQ 'CRLF and sendemail.transferencoding=base64' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=base64 \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-crlf \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + + # Note that the patches in this test are deliberately out of order; we # want to make sure it works even if the cover-letter is not in the # first mail. @@ -1306,13 +1448,13 @@ test_expect_success $PREREQ 'refusing to send cover letter template' ' rm -fr outdir && git format-patch --cover-letter -2 -o outdir && test_must_fail git send-email \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0002-*.patch \ - outdir/0000-*.patch \ - outdir/0001-*.patch \ - 2>errors >out && + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0002-*.patch \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + 2>errors >out && grep "SUBJECT HERE" errors && test -z "$(ls msgtxt*)" ' @@ -1322,14 +1464,14 @@ test_expect_success $PREREQ '--force sends cover letter template anyway' ' rm -fr outdir && git format-patch --cover-letter -2 -o outdir && git send-email \ - --force \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0002-*.patch \ - outdir/0000-*.patch \ - outdir/0001-*.patch \ - 2>errors >out && + --force \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0002-*.patch \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + 2>errors >out && ! grep "SUBJECT HERE" errors && test -n "$(ls msgtxt*)" ' @@ -1344,15 +1486,15 @@ test_cover_addresses () { mv $cover cover-to-edit.patch && perl -pe "s/^From:/$header: extra\@address.com\nFrom:/" cover-to-edit.patch >"$cover" && git send-email \ - --force \ - --from="Example <nobody@example.com>" \ - --no-to --no-cc \ - "$@" \ - --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0000-*.patch \ - outdir/0001-*.patch \ - outdir/0002-*.patch \ - 2>errors >out && + --force \ + --from="Example <nobody@example.com>" \ + --no-to --no-cc \ + "$@" \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + outdir/0002-*.patch \ + 2>errors >out && grep "^$header: extra@address.com" msgtxt1 >to1 && grep "^$header: extra@address.com" msgtxt2 >to2 && grep "^$header: extra@address.com" msgtxt3 >to3 && @@ -1385,11 +1527,11 @@ test_expect_success $PREREQ 'sendemail.aliasfiletype=mailrc' ' git config --replace-all sendemail.aliasesfile "$(pwd)/.mailrc" && git config sendemail.aliasfiletype mailrc && git send-email \ - --from="Example <nobody@example.com>" \ - --to=sbd \ - --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0001-*.patch \ - 2>errors >out && + --from="Example <nobody@example.com>" \ + --to=sbd \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0001-*.patch \ + 2>errors >out && grep "^!somebody@example\.org!$" commandline1 ' @@ -1399,12 +1541,45 @@ test_expect_success $PREREQ 'sendemail.aliasfile=~/.mailrc' ' git config --replace-all sendemail.aliasesfile "~/.mailrc" && git config sendemail.aliasfiletype mailrc && git send-email \ - --from="Example <nobody@example.com>" \ - --to=sbd \ - --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0001-*.patch \ - 2>errors >out && + --from="Example <nobody@example.com>" \ + --to=sbd \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0001-*.patch \ + 2>errors >out && grep "^!someone@example\.org!$" commandline1 ' +do_xmailer_test () { + expected=$1 params=$2 && + git format-patch -1 && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=someone@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $params \ + 0001-*.patch \ + 2>errors >out && + { grep '^X-Mailer:' out || :; } >mailer && + test_line_count = $expected mailer +} + +test_expect_success $PREREQ '--[no-]xmailer without any configuration' ' + do_xmailer_test 1 "--xmailer" && + do_xmailer_test 0 "--no-xmailer" +' + +test_expect_success $PREREQ '--[no-]xmailer with sendemail.xmailer=true' ' + test_config sendemail.xmailer true && + do_xmailer_test 1 "" && + do_xmailer_test 0 "--no-xmailer" && + do_xmailer_test 1 "--xmailer" +' + +test_expect_success $PREREQ '--[no-]xmailer with sendemail.xmailer=false' ' + test_config sendemail.xmailer false && + do_xmailer_test 0 "" && + do_xmailer_test 0 "--no-xmailer" && + do_xmailer_test 1 "--xmailer" +' + test_done diff --git a/t/t9104-git-svn-follow-parent.sh b/t/t9104-git-svn-follow-parent.sh index 13b179e721..83f17e13e8 100755 --- a/t/t9104-git-svn-follow-parent.sh +++ b/t/t9104-git-svn-follow-parent.sh @@ -72,16 +72,18 @@ test_expect_success 'follow larger parent' ' svn import -m "import a larger parent" import "$svnrepo"/larger-parent && svn cp -m "hi" "$svnrepo"/larger-parent "$svnrepo"/another-larger && git svn init --minimize-url -i larger \ - "$svnrepo"/another-larger/trunk/thunk/bump/thud && + "$svnrepo"/larger-parent/trunk/thunk/bump/thud && git svn fetch -i larger && + git svn init --minimize-url -i larger-parent \ + "$svnrepo"/another-larger/trunk/thunk/bump/thud && + git svn fetch -i larger-parent && git rev-parse --verify refs/remotes/larger && git rev-parse --verify \ - refs/remotes/larger-parent/trunk/thunk/bump/thud && + refs/remotes/larger-parent && test "`git merge-base \ - refs/remotes/larger-parent/trunk/thunk/bump/thud \ + refs/remotes/larger-parent \ refs/remotes/larger`" = \ "`git rev-parse refs/remotes/larger`" - true ' test_expect_success 'follow higher-level parent' ' diff --git a/t/t9148-git-svn-propset.sh b/t/t9148-git-svn-propset.sh new file mode 100755 index 0000000000..102639090c --- /dev/null +++ b/t/t9148-git-svn-propset.sh @@ -0,0 +1,95 @@ +#!/bin/sh +# +# Copyright (c) 2014 Alfred Perlstein +# + +test_description='git svn propset tests' + +. ./lib-git-svn.sh + +foo_subdir2="subdir/subdir2/foo_subdir2" + +set -e +mkdir import && +(set -e ; cd import + mkdir subdir + mkdir subdir/subdir2 + touch foo # for 'add props top level' + touch subdir/foo_subdir # for 'add props relative' + touch "$foo_subdir2" # for 'add props subdir' + svn_cmd import -m 'import for git svn' . "$svnrepo" >/dev/null +) +rm -rf import + +test_expect_success 'initialize git svn' ' + git svn init "$svnrepo" + ' + +test_expect_success 'fetch revisions from svn' ' + git svn fetch + ' + +set_props () { + subdir="$1" + file="$2" + shift;shift; + (cd "$subdir" && + while [ $# -gt 0 ] ; do + git svn propset "$1" "$2" "$file" || exit 1 + shift;shift; + done && + echo hello >> "$file" && + git commit -m "testing propset" "$file") +} + +confirm_props () { + subdir="$1" + file="$2" + shift;shift; + (set -e ; cd "svn_project/$subdir" && + while [ $# -gt 0 ] ; do + test "$(svn_cmd propget "$1" "$file")" = "$2" || exit 1 + shift;shift; + done) +} + + +#The current implementation has a restriction: +#svn propset will be taken as a delta for svn dcommit only +#if the file content is also modified +test_expect_success 'add props top level' ' + set_props "." "foo" "svn:keywords" "FreeBSD=%H" && + git svn dcommit && + svn_cmd co "$svnrepo" svn_project && + confirm_props "." "foo" "svn:keywords" "FreeBSD=%H" && + rm -rf svn_project + ' + +test_expect_success 'add multiple props' ' + set_props "." "foo" \ + "svn:keywords" "FreeBSD=%H" fbsd:nokeywords yes && + git svn dcommit && + svn_cmd co "$svnrepo" svn_project && + confirm_props "." "foo" \ + "svn:keywords" "FreeBSD=%H" fbsd:nokeywords yes && + rm -rf svn_project + ' + +test_expect_success 'add props subdir' ' + set_props "." "$foo_subdir2" svn:keywords "FreeBSD=%H" && + git svn dcommit && + svn_cmd co "$svnrepo" svn_project && + confirm_props "." "$foo_subdir2" "svn:keywords" "FreeBSD=%H" && + rm -rf svn_project + ' + +test_expect_success 'add props relative' ' + set_props "subdir/subdir2" "../foo_subdir" \ + svn:keywords "FreeBSD=%H" && + git svn dcommit && + svn_cmd co "$svnrepo" svn_project && + confirm_props "subdir/subdir2" "../foo_subdir" \ + svn:keywords "FreeBSD=%H" && + rm -rf svn_project + ' +test_done diff --git a/t/t9158-git-svn-mergeinfo.sh b/t/t9158-git-svn-mergeinfo.sh index 8c9539e1b4..13f78f2682 100755 --- a/t/t9158-git-svn-mergeinfo.sh +++ b/t/t9158-git-svn-mergeinfo.sh @@ -34,7 +34,7 @@ test_expect_success 'change svn:mergeinfo' ' ' test_expect_success 'verify svn:mergeinfo' ' - mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/trunk) + mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/trunk) && test "$mergeinfo" = "/branches/foo:1-10" ' @@ -46,7 +46,7 @@ test_expect_success 'change svn:mergeinfo multiline' ' ' test_expect_success 'verify svn:mergeinfo multiline' ' - mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/trunk) + mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/trunk) && test "$mergeinfo" = "/branches/bar:1-10 /branches/other:3-5,8,10-11" ' diff --git a/t/t9161-git-svn-mergeinfo-push.sh b/t/t9161-git-svn-mergeinfo-push.sh index 6cb0909afe..f113acaa6c 100755 --- a/t/t9161-git-svn-mergeinfo-push.sh +++ b/t/t9161-git-svn-mergeinfo-push.sh @@ -24,7 +24,7 @@ test_expect_success 'propagate merge information' ' ' test_expect_success 'check svn:mergeinfo' ' - mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb1) + mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb1) && test "$mergeinfo" = "/branches/svnb2:3,8" ' @@ -34,7 +34,7 @@ test_expect_success 'merge another branch' ' ' test_expect_success 'check primary parent mergeinfo respected' ' - mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb1) + mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb1) && test "$mergeinfo" = "/branches/svnb2:3,8 /branches/svnb3:4,9" ' @@ -45,7 +45,7 @@ test_expect_success 'merge existing merge' ' ' test_expect_success "check both parents' mergeinfo respected" ' - mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb1) + mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb1) && test "$mergeinfo" = "/branches/svnb2:3,8 /branches/svnb3:4,9 /branches/svnb4:5-6,10-12 @@ -70,7 +70,7 @@ test_expect_success 'second forward merge' ' ' test_expect_success 'check new mergeinfo added' ' - mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb1) + mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb1) && test "$mergeinfo" = "/branches/svnb2:3,8,16-17 /branches/svnb3:4,9 /branches/svnb4:5-6,10-12 @@ -84,7 +84,7 @@ test_expect_success 'reintegration merge' ' ' test_expect_success 'check reintegration mergeinfo' ' - mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb4) + mergeinfo=$(svn_cmd propget svn:mergeinfo "$svnrepo"/branches/svnb4) && test "$mergeinfo" = "/branches/svnb1:2-4,7-9,13-18 /branches/svnb2:3,8,16-17 /branches/svnb3:4,9 diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 37c2d633f0..aac126fd57 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -552,8 +552,8 @@ test_expect_success 'D: verify pack' ' ' cat >expect <<EOF -:000000 100755 0000000000000000000000000000000000000000 35a59026a33beac1569b1c7f66f3090ce9c09afc A newdir/exec.sh -:000000 100644 0000000000000000000000000000000000000000 046d0371e9220107917db0d0e030628de8a1de9b A newdir/interesting +:000000 100755 0000000000000000000000000000000000000000 e74b7d465e52746be2b4bae983670711e6e66657 A newdir/exec.sh +:000000 100644 0000000000000000000000000000000000000000 fcf778cda181eaa1cbc9e9ce3a2e15ee9f9fe791 A newdir/interesting EOF git diff-tree -M -r branch^ branch >actual test_expect_success \ @@ -1132,7 +1132,7 @@ test_expect_success \ compare_diff_raw expect actual' test_expect_success PIPE 'N: read and copy directory' ' - cat >expect <<-\EOF + cat >expect <<-\EOF && :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc C100 file2/newf file3/newf :100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 C100 file2/oldf file3/oldf EOF @@ -2228,7 +2228,7 @@ test_expect_success 'R: feature import-marks-if-exists' ' >expect && git fast-import --import-marks-if-exists=not_io.marks \ - --export-marks=io.marks <<-\EOF + --export-marks=io.marks <<-\EOF && feature import-marks-if-exists=io.marks EOF test_cmp expect io.marks @@ -2853,8 +2853,8 @@ test_expect_success 'S: notemodify with garbage after mark commit-ish must fail' # from # test_expect_success 'S: from with garbage after mark must fail' ' - # no && - git fast-import --import-marks=marks --export-marks=marks <<-EOF 2>err + test_must_fail \ + git fast-import --import-marks=marks --export-marks=marks <<-EOF 2>err && commit refs/heads/S2 mark :303 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE @@ -2865,9 +2865,6 @@ test_expect_success 'S: from with garbage after mark must fail' ' M 100644 :403 hello.c EOF - ret=$? && - echo returned $ret && - test $ret -ne 0 && # failed, but it created the commit # go create the commit, need it for merge test git fast-import --import-marks=marks --export-marks=marks <<-EOF && diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index e74b9ab1e1..e94b2f147a 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -297,7 +297,7 @@ test_expect_success 'setup incomplete lines' ' echo "Dominus regit me," >file && echo "incomplete line" | tr -d "\\012" >>file && git commit -a -m "Change incomplete line" && - git tag incomplete_lines_chg + git tag incomplete_lines_chg && echo "Dominus regit me," >file && git commit -a -m "Remove incomplete line" && git tag incomplete_lines_rem @@ -779,7 +779,10 @@ test_expect_success \ test_expect_success \ 'unborn HEAD: "summary" page (with "heads" subview)' \ - 'git checkout orphan_branch || git checkout --orphan orphan_branch && + '{ + git checkout orphan_branch || + git checkout --orphan orphan_branch + } && test_when_finished "git checkout master" && gitweb_run "p=.git;a=summary"' diff --git a/t/t9502-gitweb-standalone-parse-output.sh b/t/t9502-gitweb-standalone-parse-output.sh index 86dfee2e4f..0796a438bc 100755 --- a/t/t9502-gitweb-standalone-parse-output.sh +++ b/t/t9502-gitweb-standalone-parse-output.sh @@ -145,9 +145,11 @@ test_expect_success 'forks: not skipped unless "forks" feature enabled' ' grep -q ">fork of .*<" gitweb.body ' -cat >>gitweb_config.perl <<\EOF && -$feature{'forks'}{'default'} = [1]; -EOF +test_expect_success 'enable forks feature' ' + cat >>gitweb_config.perl <<-\EOF + $feature{"forks"}{"default"} = [1]; + EOF +' test_expect_success 'forks: forks skipped if "forks" feature enabled' ' gitweb_run "a=project_list" && @@ -173,7 +175,7 @@ test_expect_success 'forks: can access forked repository' ' ' test_expect_success 'forks: project_index lists all projects (incl. forks)' ' - cat >expected <<-\EOF + cat >expected <<-\EOF && .git foo.bar.git foo.git diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh index 95f4421f71..99bb71b89c 100755 --- a/t/t9814-git-p4-rename.sh +++ b/t/t9814-git-p4-rename.sh @@ -132,6 +132,9 @@ test_expect_success 'detect copies' ' cd "$git" && git config git-p4.skipSubmitEdit true && + echo "file8" >>file2 && + git commit -a -m "Differentiate file2" && + git p4 submit && cp file2 file8 && git add file8 && git commit -a -m "Copy file2 to file8" && @@ -140,6 +143,10 @@ test_expect_success 'detect copies' ' p4 filelog //depot/file8 && p4 filelog //depot/file8 | test_must_fail grep -q "branch from" && + echo "file9" >>file2 && + git commit -a -m "Differentiate file2" && + git p4 submit && + cp file2 file9 && git add file9 && git commit -a -m "Copy file2 to file9" && @@ -149,25 +156,39 @@ test_expect_success 'detect copies' ' p4 filelog //depot/file9 && p4 filelog //depot/file9 | test_must_fail grep -q "branch from" && + echo "file10" >>file2 && + git commit -a -m "Differentiate file2" && + git p4 submit && + echo "file2" >>file2 && cp file2 file10 && git add file2 file10 && git commit -a -m "Modify and copy file2 to file10" && git diff-tree -r -C HEAD && + src=$(git diff-tree -r -C HEAD | sed 1d | sed 2d | cut -f2) && + test "$src" = file2 && git p4 submit && p4 filelog //depot/file10 && - p4 filelog //depot/file10 | grep -q "branch from //depot/file" && + p4 filelog //depot/file10 | grep -q "branch from //depot/file2" && + + echo "file11" >>file2 && + git commit -a -m "Differentiate file2" && + git p4 submit && cp file2 file11 && git add file11 && git commit -a -m "Copy file2 to file11" && git diff-tree -r -C --find-copies-harder HEAD && src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 && + test "$src" = file2 && git config git-p4.detectCopiesHarder true && git p4 submit && p4 filelog //depot/file11 && - p4 filelog //depot/file11 | grep -q "branch from //depot/file" && + p4 filelog //depot/file11 | grep -q "branch from //depot/file2" && + + echo "file12" >>file2 && + git commit -a -m "Differentiate file2" && + git p4 submit && cp file2 file12 && echo "some text" >>file12 && @@ -177,15 +198,16 @@ test_expect_success 'detect copies' ' level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - case "$src" in - file10 | file11) : ;; # happy - *) false ;; # not - && + test "$src" = file2 && git config git-p4.detectCopies $(($level + 2)) && git p4 submit && p4 filelog //depot/file12 && p4 filelog //depot/file12 | test_must_fail grep -q "branch from" && + echo "file13" >>file2 && + git commit -a -m "Differentiate file2" && + git p4 submit && + cp file2 file13 && echo "different text" >>file13 && git add file13 && @@ -194,14 +216,11 @@ test_expect_success 'detect copies' ' level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - case "$src" in - file10 | file11 | file12) : ;; # happy - *) false ;; # not - && + test "$src" = file2 && git config git-p4.detectCopies $(($level - 2)) && git p4 submit && p4 filelog //depot/file13 && - p4 filelog //depot/file13 | grep -q "branch from //depot/file" + p4 filelog //depot/file13 | grep -q "branch from //depot/file2" ) ' diff --git a/t/t9817-git-p4-exclude.sh b/t/t9817-git-p4-exclude.sh new file mode 100755 index 0000000000..aac568eadf --- /dev/null +++ b/t/t9817-git-p4-exclude.sh @@ -0,0 +1,71 @@ +#!/bin/sh + +test_description='git p4 tests for excluded paths during clone and sync' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +# Create a repo with the structure: +# +# //depot/wanted/foo +# //depot/discard/foo +# +# Check that we can exclude a subdirectory with both +# clone and sync operations. + +test_expect_success 'create exclude repo' ' + ( + cd "$cli" && + mkdir -p wanted discard && + echo wanted >wanted/foo && + echo discard >discard/foo && + p4 add wanted/foo discard/foo && + p4 submit -d "initial revision" + ) +' + +test_expect_success 'check the repo was created correctly' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot/...@all && + ( + cd "$git" && + test_path_is_file wanted/foo && + test_path_is_file discard/foo + ) +' + +test_expect_success 'clone, excluding part of repo' ' + test_when_finished cleanup_git && + git p4 clone -//depot/discard/... --dest="$git" //depot/...@all && + ( + cd "$git" && + test_path_is_file wanted/foo && + test_path_is_missing discard/foo + ) +' + +test_expect_success 'clone, then sync with exclude' ' + test_when_finished cleanup_git && + git p4 clone -//depot/discard/... --dest="$git" //depot/...@all && + ( + cd "$cli" && + p4 edit wanted/foo discard/foo && + date >>wanted/foo && + date >>discard/foo && + p4 submit -d "updating" && + + cd "$git" && + git p4 sync -//depot/discard/... && + test_path_is_file wanted/foo && + test_path_is_missing discard/foo + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index f10a75290e..4a14a5892e 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -351,6 +351,25 @@ test_expect_success '__gitcomp_nl - doesnt fail because of invalid variable name __gitcomp_nl "$invalid_variable_name" ' +test_expect_success '__git_remotes - list remotes from $GIT_DIR/remotes and from config file' ' + cat >expect <<-EOF && + remote_from_file_1 + remote_from_file_2 + remote_in_config_1 + remote_in_config_2 + EOF + test_when_finished "rm -rf .git/remotes" && + mkdir -p .git/remotes && + >.git/remotes/remote_from_file_1 && + >.git/remotes/remote_from_file_2 && + test_when_finished "git remote remove remote_in_config_1" && + git remote add remote_in_config_1 git://remote_1 && + test_when_finished "git remote remove remote_in_config_2" && + git remote add remote_in_config_2 git://remote_2 && + __git_remotes >actual && + test_cmp expect actual +' + test_expect_success 'basic' ' run_completion "git " && # built-in @@ -549,7 +568,7 @@ test_expect_success 'complete files' ' test_completion "git commit " "modified" && : TODO .gitignore should not be here && - test_completion "git ls-files " <<-\EOF + test_completion "git ls-files " <<-\EOF && .gitignore dir modified diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 9150984184..49d58e6726 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -35,6 +35,8 @@ test_expect_success 'setup for prompt tests' ' git commit -m "another b2" file && echo 000 >file && git commit -m "yet another b2" file && + mkdir ignored_dir && + echo "ignored_dir/" >>.gitignore && git checkout master ' @@ -164,7 +166,7 @@ test_expect_success 'prompt - inside bare repository' ' ' test_expect_success 'prompt - interactive rebase' ' - printf " (b1|REBASE-i 2/3)" >expected + printf " (b1|REBASE-i 2/3)" >expected && write_script fake_editor.sh <<-\EOF && echo "exec echo" >"$1" echo "edit $(git log -1 --format="%h")" >>"$1" @@ -395,6 +397,17 @@ test_expect_success 'prompt - untracked files status indicator - untracked files test_cmp expected "$actual" ' +test_expect_success 'prompt - untracked files status indicator - untracked files outside cwd' ' + printf " (master %%)" >expected && + ( + mkdir -p ignored_dir && + cd ignored_dir && + GIT_PS1_SHOWUNTRACKEDFILES=y && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + test_expect_success 'prompt - untracked files status indicator - shell variable unset with config disabled' ' printf " (master)" >expected && test_config bash.showUntrackedFiles false && @@ -588,4 +601,108 @@ test_expect_success 'prompt - zsh color pc mode' ' test_cmp expected "$actual" ' +test_expect_success 'prompt - hide if pwd ignored - env var unset, config disabled' ' + printf " (master)" >expected && + test_config bash.hideIfPwdIgnored false && + ( + cd ignored_dir && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var unset, config disabled, pc mode' ' + printf "BEFORE: (\${__git_ps1_branch_name}):AFTER" >expected && + test_config bash.hideIfPwdIgnored false && + ( + cd ignored_dir && + __git_ps1 "BEFORE:" ":AFTER" && + printf "%s" "$PS1" >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var unset, config unset' ' + printf " (master)" >expected && + ( + cd ignored_dir && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var unset, config unset, pc mode' ' + printf "BEFORE: (\${__git_ps1_branch_name}):AFTER" >expected && + ( + cd ignored_dir && + __git_ps1 "BEFORE:" ":AFTER" && + printf "%s" "$PS1" >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var set, config disabled' ' + printf " (master)" >expected && + test_config bash.hideIfPwdIgnored false && + ( + cd ignored_dir && + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var set, config disabled, pc mode' ' + printf "BEFORE: (\${__git_ps1_branch_name}):AFTER" >expected && + test_config bash.hideIfPwdIgnored false && + ( + cd ignored_dir && + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + __git_ps1 "BEFORE:" ":AFTER" && + printf "%s" "$PS1" >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var set, config unset' ' + printf "" >expected && + ( + cd ignored_dir && + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var set, config unset, pc mode' ' + printf "BEFORE::AFTER" >expected && + ( + cd ignored_dir && + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + __git_ps1 "BEFORE:" ":AFTER" && + printf "%s" "$PS1" >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stdout)' ' + printf " (GIT_DIR!)" >expected && + ( + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + cd .git && + __git_ps1 >"$actual" 2>/dev/null + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stderr)' ' + printf "" >expected && + ( + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + cd .git && + __git_ps1 >/dev/null 2>"$actual" + ) && + test_cmp expected "$actual" +' + test_done diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 0d93e33de4..8f8858a5f0 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -478,7 +478,7 @@ test_external_without_stderr () { test_path_is_file () { if ! test -f "$1" then - echo "File $1 doesn't exist. $*" + echo "File $1 doesn't exist. $2" false fi } @@ -486,7 +486,7 @@ test_path_is_file () { test_path_is_dir () { if ! test -d "$1" then - echo "Directory $1 doesn't exist. $*" + echo "Directory $1 doesn't exist. $2" false fi } @@ -745,7 +745,9 @@ test_ln_s_add () { else printf '%s' "$1" >"$2" && ln_s_obj=$(git hash-object -w "$2") && - git update-index --add --cacheinfo 120000 $ln_s_obj "$2" + git update-index --add --cacheinfo 120000 $ln_s_obj "$2" && + # pick up stat info from the file + git update-index "$2" fi } diff --git a/t/test-lib.sh b/t/test-lib.sh index 79e8a33d04..4ea99a209d 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -140,6 +140,9 @@ else } fi +: ${ASAN_OPTIONS=detect_leaks=0} +export ASAN_OPTIONS + # Protect ourselves from common misconfiguration to export # CDPATH into the environment unset CDPATH @@ -149,10 +152,7 @@ unset UNZIP case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in 1|2|true) - echo "* warning: Some tests will not work if GIT_TRACE" \ - "is set as to trace on STDERR ! *" - echo "* warning: Please set GIT_TRACE to something" \ - "other than 1, 2 or true ! *" + GIT_TRACE=4 ;; esac @@ -181,16 +181,8 @@ export _x05 _x40 _z40 LF u200c # This test checks if command xyzzy does the right thing... # ' # . ./test-lib.sh -[ "x$ORIGINAL_TERM" != "xdumb" ] && ( - TERM=$ORIGINAL_TERM && - export TERM && - [ -t 1 ] && - tput bold >/dev/null 2>&1 && - tput setaf 1 >/dev/null 2>&1 && - tput sgr0 >/dev/null 2>&1 - ) && - color=t +unset color while test "$#" -ne 0 do case "$1" in @@ -237,6 +229,12 @@ do --root=*) root=$(expr "z$1" : 'z[^=]*=\(.*\)') shift ;; + --chain-lint) + GIT_TEST_CHAIN_LINT=1 + shift ;; + --no-chain-lint) + GIT_TEST_CHAIN_LINT=0 + shift ;; -x) trace=t verbose=t @@ -255,40 +253,6 @@ then verbose=t fi -if test -n "$color" -then - say_color () { - ( - TERM=$ORIGINAL_TERM - export TERM - case "$1" in - error) - tput bold; tput setaf 1;; # bold red - skip) - tput setaf 4;; # blue - warn) - tput setaf 3;; # brown/yellow - pass) - tput setaf 2;; # green - info) - tput setaf 6;; # cyan - *) - test -n "$quiet" && return;; - esac - shift - printf "%s" "$*" - tput sgr0 - echo - ) - } -else - say_color() { - test -z "$1" && test -n "$quiet" && return - shift - printf "%s\n" "$*" - } -fi - error () { say_color error "error: $*" GIT_EXIT_OK=t @@ -338,6 +302,7 @@ die () { GIT_EXIT_OK= trap 'die' EXIT +trap 'exit $?' INT # The user-facing functions are loaded from a separate file so that # test_perf subshells can have them too @@ -563,6 +528,16 @@ test_eval_ () { test_run_ () { test_cleanup=: expecting_failure=$2 + + if test "${GIT_TEST_CHAIN_LINT:-0}" != 0; then + # 117 is magic because it is unlikely to match the exit + # code of other programs + test_eval_ "(exit 117) && $1" + if test "$?" != 117; then + error "bug in the test script: broken &&-chain: $1" + fi + fi + setup_malloc_check test_eval_ "$1" eval_ret=$? @@ -681,7 +656,7 @@ test_done () { then error "Can't use skip_all after running some tests" fi - [ -z "$skip_all" ] || skip_all=" # SKIP $skip_all" + test -z "$skip_all" || skip_all=" # SKIP $skip_all" if test $test_external_has_tap -eq 0 then @@ -854,6 +829,52 @@ HOME="$TRASH_DIRECTORY" GNUPGHOME="$HOME/gnupg-home-not-used" export HOME GNUPGHOME +# run the tput tests *after* changing HOME (in case ncurses needs +# ~/.terminfo for $TERM) +test -n "${color+set}" || test "x$ORIGINAL_TERM" != "xdumb" && ( + TERM=$ORIGINAL_TERM && + export TERM && + test -t 1 && + tput bold >/dev/null 2>&1 && + tput setaf 1 >/dev/null 2>&1 && + tput sgr0 >/dev/null 2>&1 + ) && + color=t + +if test -n "$color" +then + say_color () { + ( + TERM=$ORIGINAL_TERM + export TERM + case "$1" in + error) + tput bold; tput setaf 1;; # bold red + skip) + tput setaf 4;; # blue + warn) + tput setaf 3;; # brown/yellow + pass) + tput setaf 2;; # green + info) + tput setaf 6;; # cyan + *) + test -n "$quiet" && return;; + esac + shift + printf "%s" "$*" + tput sgr0 + echo + ) + } +else + say_color() { + test -z "$1" && test -n "$quiet" && return + shift + printf "%s\n" "$*" + } +fi + if test -z "$TEST_NO_CREATE_REPO" then test_create_repo "$TRASH_DIRECTORY" @@ -1024,12 +1045,42 @@ test_lazy_prereq USR_BIN_TIME ' test -x /usr/bin/time ' -# When the tests are run as root, permission tests will report that -# things are writable when they shouldn't be. -test -w / || test_set_prereq SANITY +test_lazy_prereq NOT_ROOT ' + uid=$(id -u) && + test "$uid" != 0 +' + +# On a filesystem that lacks SANITY, a file can be deleted even if +# the containing directory doesn't have write permissions, or a file +# can be accessed even if the containing directory doesn't have read +# or execute permissions, causing our tests that validate that Git +# works sensibly in such situations. +test_lazy_prereq SANITY ' + mkdir SANETESTD.1 SANETESTD.2 && + + chmod +w SANETESTD.1 SANETESTD.2 && + >SANETESTD.1/x 2>SANETESTD.2/x && + chmod -w SANETESTD.1 && + chmod -rx SANETESTD.2 || + error "bug in test sript: cannot prepare SANETESTD" + + ! rm SANETESTD.1/x && ! test -f SANETESTD.2/x + status=$? + + chmod +rwx SANETESTD.1 SANETESTD.2 && + rm -rf SANETESTD.1 SANETESTD.2 || + error "bug in test sript: cannot clean SANETESTD" + return $status +' GIT_UNZIP=${GIT_UNZIP:-unzip} test_lazy_prereq UNZIP ' "$GIT_UNZIP" -v test $? -ne 127 ' + +run_with_limited_cmdline () { + (ulimit -s 128 && "$@") +} + +test_lazy_prereq CMDLINE_LIMIT 'run_with_limited_cmdline true' |