diff options
Diffstat (limited to 't')
202 files changed, 10325 insertions, 2384 deletions
diff --git a/t/Makefile b/t/Makefile index 8fd1a72357..43b15e36ae 100644 --- a/t/Makefile +++ b/t/Makefile @@ -13,7 +13,7 @@ TAR ?= $(TAR) RM ?= rm -f PROVE ?= prove DEFAULT_TEST_TARGET ?= test -TEST_LINT ?= test-lint-duplicates test-lint-executable +TEST_LINT ?= test-lint ifdef TEST_OUTPUT_DIRECTORY TEST_RESULTS_DIRECTORY = $(TEST_OUTPUT_DIRECTORY)/test-results @@ -29,6 +29,7 @@ TEST_RESULTS_DIRECTORY_SQ = $(subst ','\'',$(TEST_RESULTS_DIRECTORY)) T = $(sort $(wildcard t[0-9][0-9][0-9][0-9]-*.sh)) TSVN = $(sort $(wildcard t91[0-9][0-9]-*.sh)) TGITWEB = $(sort $(wildcard t95[0-9][0-9]-*.sh)) +THELPERS = $(sort $(filter-out $(T),$(wildcard *.sh))) all: $(DEFAULT_TEST_TARGET) @@ -65,7 +66,7 @@ test-lint-executable: echo >&2 "non-executable tests:" $$bad; exit 1; } test-lint-shell-syntax: - @'$(PERL_PATH_SQ)' check-non-portable-shell.pl $(T) + @'$(PERL_PATH_SQ)' check-non-portable-shell.pl $(T) $(THELPERS) aggregate-results-and-cleanup: $(T) $(MAKE) aggregate-results @@ -71,6 +71,7 @@ You can pass --verbose (or -v), --debug (or -d), and --immediate (or -i) command line argument to the test, or by setting GIT_TEST_OPTS appropriately before running "make". +-v:: --verbose:: This makes the test more verbose. Specifically, the command being run and their output if any are also @@ -81,6 +82,13 @@ appropriately before running "make". numbers matching <pattern>. The number matched against is simply the running count of the test within the file. +-x:: + Turn on shell tracing (i.e., `set -x`) during the tests + themselves. Implies `--verbose`. Note that this can cause + failures in some tests which redirect and test the + output of shell functions. Use with caution. + +-d:: --debug:: This may help the person who is developing a new test. It causes the command defined with test_debug to run. @@ -89,6 +97,7 @@ appropriately before running "make". failed tests so that you can inspect its contents after the test finished. +-i:: --immediate:: This causes the test to immediately exit upon the first failed test. Cleanup commands requested with @@ -96,10 +105,17 @@ appropriately before running "make". in order to keep the state for inspection by the tester to diagnose the bug. +-l:: --long-tests:: This causes additional long-running tests to be run (where available), for more exhaustive testing. +-r:: +--run=<test-selector>:: + Run only the subset of tests indicated by + <test-selector>. See section "Skipping Tests" below for + <test-selector> syntax. + --valgrind=<tool>:: Execute all Git binaries under valgrind tool <tool> and exit with status 126 on errors (just like regular tests, this will @@ -187,10 +203,77 @@ and either can match the "t[0-9]{4}" part to skip the whole test, or t[0-9]{4} followed by ".$number" to say which particular test to skip. -Note that some tests in the existing test suite rely on previous -test item, so you cannot arbitrarily disable one and expect the -remainder of test to check what the test originally was intended -to check. +For an individual test suite --run could be used to specify that +only some tests should be run or that some tests should be +excluded from a run. + +The argument for --run is a list of individual test numbers or +ranges with an optional negation prefix that define what tests in +a test suite to include in the run. A range is two numbers +separated with a dash and matches a range of tests with both ends +been included. You may omit the first or the second number to +mean "from the first test" or "up to the very last test" +respectively. + +Optional prefix of '!' means that the test or a range of tests +should be excluded from the run. + +If --run starts with an unprefixed number or range the initial +set of tests to run is empty. If the first item starts with '!' +all the tests are added to the initial set. After initial set is +determined every test number or range is added or excluded from +the set one by one, from left to right. + +Individual numbers or ranges could be separated either by a space +or a comma. + +For example, to run only tests up to a specific test (21), one +could do this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='1-21' + +or this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='-21' + +Common case is to run several setup tests (1, 2, 3) and then a +specific test (21) that relies on that setup: + + $ sh ./t9200-git-cvsexport-commit.sh --run='1 2 3 21' + +or: + + $ sh ./t9200-git-cvsexport-commit.sh --run=1,2,3,21 + +or: + + $ sh ./t9200-git-cvsexport-commit.sh --run='-3 21' + +As noted above, the test set is built going though items left to +right, so this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='1-4 !3' + +will run tests 1, 2, and 4. Items that comes later have higher +precendence. It means that this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='!3 1-4' + +would just run tests from 1 to 4, including 3. + +You may use negation with ranges. The following will run all +test in the test suite except from 7 up to 11: + + $ sh ./t9200-git-cvsexport-commit.sh --run='!7-11' + +Some tests in a test suite rely on the previous tests performing +certain actions, specifically some tests are designated as +"setup" test, so you cannot _arbitrarily_ disable one test and +expect the rest to function correctly. + +--run is mostly useful when you want to focus on a specific test +and know what setup is needed for it. Or when you want to run +everything up to a certain test. Naming Tests @@ -335,7 +418,8 @@ Don't: dies in an unexpected way (e.g. segfault). On the other hand, don't use test_must_fail for running regular - platform commands; just use '! cmd'. + platform commands; just use '! cmd'. We are not in the business + of verifying that the world given to us sanely works. - use perl without spelling it as "$PERL_PATH". This is to help our friends on Windows where the platform Perl often adds CR before @@ -596,6 +680,27 @@ library for your script to use. ... ' + - test_write_lines <lines> + + Write <lines> on standard output, one line per argument. + Useful to prepare multi-line files in a compact form. + + Example: + + test_write_lines a b c d e f g >foo + + Is a more compact equivalent of: + cat >foo <<-EOF + a + b + c + d + e + f + g + EOF + + - test_pause This command is useful for writing and debugging tests and must be diff --git a/t/annotate-tests.sh b/t/annotate-tests.sh index 304c7b7d87..071e4d7d3e 100644 --- a/t/annotate-tests.sh +++ b/t/annotate-tests.sh @@ -1,6 +1,17 @@ # This file isn't used as a test script directly, instead it is # sourced from t8001-annotate.sh and t8002-blame.sh. +if test_have_prereq MINGW +then + sanitize_L () { + echo "$1" | sed 'sX\(^-L\|,\)\^\?/X&\\;*Xg' + } +else + sanitize_L () { + echo "$1" + } +fi + check_count () { head= && file='file' && @@ -10,6 +21,7 @@ check_count () { case "$1" in -h) head="$2"; shift; shift ;; -f) file="$2"; shift; shift ;; + -L*) options="$options $(sanitize_L "$1")"; shift ;; -*) options="$options $1"; shift ;; *) break ;; esac diff --git a/t/check-non-portable-shell.pl b/t/check-non-portable-shell.pl index 45971f43b7..b170cbc045 100755 --- a/t/check-non-portable-shell.pl +++ b/t/check-non-portable-shell.pl @@ -16,12 +16,12 @@ sub err { while (<>) { chomp; - /^\s*sed\s+-i/ and err 'sed -i is not portable'; - /^\s*echo\s+-n/ and err 'echo -n is not portable (please use printf)'; + /\bsed\s+-i/ and err 'sed -i is not portable'; + /\becho\s+-n/ and err 'echo -n is not portable (please use printf)'; /^\s*declare\s+/ and err 'arrays/declare not portable'; /^\s*[^#]\s*which\s/ and err 'which is not portable (please use type)'; - /test\s+[^=]*==/ and err '"test a == b" is not portable (please use =)'; - /^\s*export\s+[^=]*=/ and err '"export FOO=bar" is not portable (please use FOO=bar && export FOO)'; + /\btest\s+[^=]*==/ and err '"test a == b" is not portable (please use =)'; + /\bexport\s+[A-Za-z0-9_]*=/ and err '"export FOO=bar" is not portable (please use FOO=bar && export FOO)'; # this resets our $. for each file close ARGV if eof; } diff --git a/t/lib-credential.sh b/t/lib-credential.sh index 957ae936e8..d8e41f7ddd 100755 --- a/t/lib-credential.sh +++ b/t/lib-credential.sh @@ -278,12 +278,10 @@ helper_test_timeout() { ' } -cat >askpass <<\EOF -#!/bin/sh +write_script askpass <<\EOF echo >&2 askpass: $* -what=`echo $1 | cut -d" " -f1 | tr A-Z a-z | tr -cd a-z` +what=$(echo $1 | cut -d" " -f1 | tr A-Z a-z | tr -cd a-z) echo "askpass-$what" EOF -chmod +x askpass GIT_ASKPASS="$PWD/askpass" export GIT_ASKPASS diff --git a/t/lib-cvs.sh b/t/lib-cvs.sh index 5076718916..9b2bcfb1b0 100644 --- a/t/lib-cvs.sh +++ b/t/lib-cvs.sh @@ -13,7 +13,7 @@ fi CVS="cvs -f" export CVS -cvsps_version=`cvsps -h 2>&1 | sed -ne 's/cvsps version //p'` +cvsps_version=$(cvsps -h 2>&1 | sed -ne 's/cvsps version //p') case "$cvsps_version" in 2.1 | 2.2*) ;; diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index 05824fa8e4..d88da29f77 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -1,6 +1,6 @@ #!/bin/sh -gpg_version=`gpg --version 2>&1` +gpg_version=$(gpg --version 2>&1) if test $? = 127; then say "You do not seem to have gpg installed" else @@ -12,19 +12,39 @@ else say "Your version of gpg (1.0.6) is too buggy for testing" ;; *) - # key generation info: gpg --homedir t/lib-gpg --gen-key - # Type DSA and Elgamal, size 2048 bits, no expiration date. - # Name and email: C O Mitter <committer@example.com> + # Available key info: + # * Type DSA and Elgamal, size 2048 bits, no expiration date, + # name and email: C O Mitter <committer@example.com> + # * Type RSA, size 2048 bits, no expiration date, + # name and email: Eris Discordia <discord@example.net> # No password given, to enable non-interactive operation. - cp -R "$TEST_DIRECTORY"/lib-gpg ./gpghome - chmod 0700 gpghome - GNUPGHOME="$(pwd)/gpghome" - export GNUPGHOME + # To generate new key: + # gpg --homedir /tmp/gpghome --gen-key + # To write armored exported key to keyring: + # gpg --homedir /tmp/gpghome --export-secret-keys \ + # --armor 0xDEADBEEF >> lib-gpg/keyring.gpg + # To export ownertrust: + # gpg --homedir /tmp/gpghome --export-ownertrust \ + # > lib-gpg/ownertrust + mkdir ./gpghome && + chmod 0700 ./gpghome && + GNUPGHOME="$(pwd)/gpghome" && + export GNUPGHOME && + gpg --homedir "${GNUPGHOME}" 2>/dev/null --import \ + "$TEST_DIRECTORY"/lib-gpg/keyring.gpg && + gpg --homedir "${GNUPGHOME}" 2>/dev/null --import-ownertrust \ + "$TEST_DIRECTORY"/lib-gpg/ownertrust && test_set_prereq GPG ;; esac fi +if test_have_prereq GPG && + echo | gpg --homedir "${GNUPGHOME}" -b --rfc1991 >/dev/null 2>&1 +then + test_set_prereq RFC1991 +fi + sanitize_pgp() { perl -ne ' /^-----END PGP/ and $in_pgp = 0; diff --git a/t/lib-gpg/keyring.gpg b/t/lib-gpg/keyring.gpg new file mode 100644 index 0000000000..fb1f048c22 --- /dev/null +++ b/t/lib-gpg/keyring.gpg @@ -0,0 +1,88 @@ +-----BEGIN PGP PRIVATE KEY BLOCK----- +Version: GnuPG v1 + +lQG7BEZnyykRBACzCPjIpTYNL7Y2tQqlEGTTDlvZcWNLjF5f7ZzuyOqNOidLUgFD +36qch1LZLSZkShdR3Gae+bsolyjxrlFuFP0eXRPMtqK20aLw7WZvPFpEV1ThMne+ +PRJjYrvghWw3L0VVIAIZ8GXwrVBuU99uEjHEI0ojYloOvFc2jVPgSaoBvwCg48Tj +fol2foSoJa7XUu9yAL8szg8D/RUsTzNF+I9hSRHl7MYKFMYoKEY9BDgrgAujp7YY +8qdGsiUb0Ggyzp2kRjZFt4lpcvKhGfHn5GEjmtk+fRbD5qPfMqKFW+T0NPfYlYmL +JJ4fs4qZ8Lx7x6iG6X51u+YNwsQuIGjMCC3CeNi3F7or651kkNYASbaQ1NROkCIN +NudyA/0aasvoZUoNJAc2cP5Ifs6WhXMWLfMR2p2XbfKwKNYneec60usnSComcKqh +sJVk0Gytvr3FOYVhRkXnKAbx+0W2urFP8OFVBTEKO6Ts2VygWGgneQYoHnqzwlUE +yjOjlr+lyf7u2s/KAxpKA6jnttEdRZAmzWkhuox1wwAUkr27/QAAn3TEzKR1pxxR ++R3dHuFpnnfatMIDC5O0IkMgTyBNaXR0ZXIgPGNvbW1pdHRlckBleGFtcGxlLmNv +bT6IXgQTEQIAHgUCRmfLKQIbAwYLCQgHAwIDFQIDAxYCAQIeAQIXgAAKCRATtvUe +zd5DDXQdAKC92f+wOrTkbmPEf+u+qA/Gv6BxQwCfQ128JXCi3MpMB8tI2Kmo15tY +gnmdAj0ERmfLThAIAM65eT9T6+gg0fJn+Qxhs3FFDPjxK6AOBS3SieWWmXO6stZZ +plvb7r2+sXYp8HMHntnOX3TRPolIx1dsdkv3W3w8yUzf9Lmo2XMPsZ3/isWdEbOI +A0rO3B1xwbQO7vEoWHeB7uyYIF6YsIH0pMqxkImciwB1tnJPB9OxqPHlD/HyyHr2 +voj6nmEGaPQWj8/dkfyenXm6XmNZUZL/slk6tRhNwv4cW3QQLh39nbiz9rqvZMKF +XX8wkY4FdQkJjCGwqzG+7yJcyHvem29/iq//jRLZgdiN8BwV3MCTJyDp8/Wb/d9y +jZcUm1RdtwRiwfhfQ+zmpyspm7OxINfH65rf7f8ABA0IALRiMRs/eOD59jrYXmPS +ZQUbiALlbJJtuP2c9N3WZ5OgrhDiAW+SDIN+hgDynJ9b7C2dE3xNaud4zaXAAF44 +J4J0bAo2ZtZoJajw+GXwaZfh4Z7nPNHwEcbFD4/uXPCj9jPkcLOJqGmUY1aXdygo +t3Hn5U/zo8JxPQ83YbJQhkzAOZ/HGowLNqKgGkLLHn1X9qay0CxlfTQeEN5RZyl3 +b4qRzGgGALFvoheyZIUw1TbjRpbn3kqlJooEQY02VwXFXfLI/LwzglilH6sSckvs +0WHKLZ+0L6b3CgJHN2RsZ7QxwCBi1aemsvr65FeEXp/AYxaG5duUbsugG8PgoJ06 +bsEAAVQNQO3cXWpuiJ/nNLLnWuPunBKJUlurkBdf2GD+m+muF0VpwDchhqqbTO4e +FqOISQQYEQIACQUCRmfLTgIbDAAKCRATtvUezd5DDcHsAKDQcoAtDWJFupVRqleB +Cezx4Q2khACcCs+/LtE8Lb9hC+2cvr3uH5p82AI= +=aEiU +-----END PGP PRIVATE KEY BLOCK----- +-----BEGIN PGP PRIVATE KEY BLOCK----- +Version: GnuPG v1 + +lQOYBFFMlkcBCADJi/xnAF8yI34PHilSCbM7VtOFO17oFMkpu4cgN2QpPuM5MVjy +cvrzKSguZFvPCDLzeAFJW1uPxL4SHaHSkisCrFhijH7OJWcOPNPSFCwu+inAoAsv +Hm4ns6pfDZyRjVTHSY4rdMISqKFRozaXu8vHeBRzIhFnubBCepKZW07oKPnrnELV +TVUSUVI+6el8JFmJIWxxLNLhfRRSPF0v4MDXPF//iCWiZDI+J1pLvQ5V/f7YtfsD +GV0oPY66J72BFJG555eKBttnNY901LmI3ocn5P5iVnXDaqMElw7FKpnANXucgY3H +4kLyNkI3s3J0CGbXI7b3MBWtjctuhWv1q2G5ABEBAAEAB/wLiuza/qEfv1Cfj7FQ +ytAXpz1YoAcrcM/53TeRQhrbvIee5ZNGhLdCkyot81QeuJrSaXO0E9CxRynrjQQ7 +ibYqN7Hy0uu1kAbQQJjmVdQXTKnKJ7Wm7oM4hYhNsVCKNXc+1+5AfDYGg4nZob36 +qqgHtc+Ardl5VfUg7uF+eZrnSMynjZANgikKbPtE09DKVtVOtUE4xTD9ijkpgn65 +glsZDqb7J4QVgTeEiCDKJsQvin3SwrPBqBxBRULF2TIaMbOwe6dHiiaI85rsvAWS +VGzonUB3IU1470P2SDIVczbXYUK/nDSGx6ZZ0wLu9ZcCyUPvxVEykuh2P4UWHla+ +nHLRBADMLavcfjsCI5CRUsdurYpgE8Y3bEbcDpvzAu5jT5D25p3YPDODOXD3AKTt +PzVMARVtv8twkbgAyWaoDevJz8OtmoSwsWjdFo4YvsYw9jV7Yf3GwzD3Ya1ZnW32 +JWQr6cX8qcK0AukAD7UZkVyhU2KBvB02t8lKHLbScHXTYVqrywQA/LNUXwmHji+6 +osnSQAC8X9ggMOEs9dGo7Qlk4JgfGAH17CFI3S3ubsaVEdxz3YwzOkD8SNmEbLyW +a7CZ/RnpdAZU0nB7kSfbfZl7ajhPbgKBMsaV2yvaDdJeor4m5eKdXffRk0SksxjL +Z/4P1tTIuL8WzetGB/aDcWDFgseSAAsEALzmf579ptlSmDyGRAKQqub+mj4V3EUZ +1GVGcfBY86w3BZVDsaRiCtcNjk/lcP4AZ1Vbb42RM6jk8nLsENRc7rf2xa7ZPf0T +6n5F6W+vk7EG76RoFhKVtGZngGKiDGVavxk3FT/yf8lKrT3wYiT03SZDuZ0pWvku +FiJGEyesAC8WRz60JEVyaXMgRGlzY29yZGlhIDxkaXNjb3JkQGV4YW1wbGUubmV0 +PokBOAQTAQIAIgUCUUyWRwIbAwYLCQgHAwIGFQgCCQoLBBYCAwECHgECF4AACgkQ +YQkuhbcicYlYowf7B+f+FDcLVfw8XzGlKku1F6PI1yGCt7AMO2/JkmO4LlgHuIgF +pqe5b/XjKl0IsRcbVLitqiIokc8u+7H8yYU67DDliq7t1gqBy+qThSHcgn6WMKTa +qCqOE2jzHyqulIAzQsJQ+c5SRofEZAKT4Qa2Dy+nsqWDpIE78aJd0Vnkk9U6H2Vu +ABvUeN/IMgvxPr525o+rBD7LU4J3CtOzfV+sO6+33da+Bm9UhkR4tC4H/n1dDN1J +YuxBQbgxTq/h8mKe4/7/Yvy+5WsYd96ZRLE2ZFWeWXtKkwmYbQ42G3SZUXaZ8R8O +tbTyUrjbFKipO4wvXwhyju1l9cxAsrca6xbSCJ0DmARRTJZHAQgAqTtPFcTXqM+U +o7bOoo+dcHi8XDf/8XSEmZfMKc/U5pSTBk7h1gSKuGzjF2n3wQm6A8+101vTLaQ6 +PoFDFW8uQB00mjymGrRDYFgz8bjhnaekZnA4XThr1ROjffgMhs3uTpCebdV+lL8K +0oJTHc39TPLTg23DFcRSDN+3ARJJS7+CRBIbt9L5gObpgA4HUap/o6N7O04rQOPU +83MAqnwo2JTO/Ded0zoad0Vo31Nmk4F+KvEE52ftGHbd7yqIUGKBt2SeTAh850ac +LeNZP+V1Y7atBCr7/zm+JpHWq9OH7/NomlEIkxL8WDt8GfAKoqZgqefL+ACEnLbA +t1du3f0FswARAQABAAf8DclaIQDfPM5kYo3y+YVPoykC11RskmQWpVibdlCLHJm/ +/ISSm1fVYT7lpTOpzl0XfVX/jw9s/cviPtNS/r0G/Iwki+gi9Av5bTDiUm/oWWqd +1waPYPDGwB4QdKOviY/fOSFI9tOsszt5Czs4wDXWy90AZDWd7fkHYisbgofV1sjK +Q8bYQPabcepcZ2JyET+EpZBEmUHHqQ76bTiqjN+Vz6k1OFlsEBzGkE+WIakAhkQ2 +57oUrRgFe+h6Ch7meB/v6vVfIRSsLpZe183uc4SigqtfsgjbG9PqOcAJOqovDncB +Scg3qvpWFOAkTA3Re+yBPUd2HHl9WF/TPa2kBDCT2QQAxcJZeUCuUgDgCizqEgfs +Kzm6dy4G/OJdW0q9m9psHqD1XWLd7ZLE4+eTS1cxktJiGcGNdGoZD0EtgxkV09uM +12QYCOBErFJzv4/4oledHeEhTaRR/mFFGRp+kWTz2Ai/zNqUd3D++DYUe8g4mVQJ +6JP014XhvoRnaCfT8cH9Zd0EANsSL70WGdifcVoWKA9jFJhahc0sSG6IZvMOc7bs +cSbhBqLEnheObkarBP+A+zgllqIf+sbCassMXjcV52mnl9th3J5RWr7scrQLJ9ZX +Ivz3uoP85vwlUI98dI9roYK0OpKmG4hNFppAcgiCVNVjnQlhuQ/HoexRHxRmnmcb +38jPA/sEHPCFbLCGOSB+HQNKx/5Wf6VpFX/4oBNbIUiYoxcRl0jpYT7Lc0zbc8So +HthjPfWhXhKzYvEDC5YgASEy1cNbGMUJcGyuAInwIQjq44FSwRMkI3ISSHnbv1iH +0wBVJUzpluMebEAesdZUz1DcZWVf6eVJD0dhZxD6DoG7Xj1m9ThUiQEfBBgBAgAJ +BQJRTJZHAhsMAAoJEGEJLoW3InGJ7HEIAMXkMf4cOWmnAuvvcSm3KpLghuWik9dy +fn1sY/IG5atoKK+ypmV/TlBlMZqFQzuPIJQT8VLbmxtLlDhJG04LbI6c8axIZxOO +ZKLy5nTTSy16ztqEeS7eifHLPZg1UFFyEEIQ1XW0CNDAeuWKh90ERjyl4Cg7PnWS +Z9Ei+zj6JD5Pcdi3BJhQo9WOLOVEJ0NHmewTYqk9QVXH/0v1Hdl4LMJtgcbdbDWk +4UTkXbg9pn3umCgkNJ3Vs8fWnIWO9Izdr2/wrFY2JvUT7Yvl+wsNIWatvOEzGy7n +BOW78WUxzhu0YJTLKy+iKCjg5HS5dx6OC+e4aEEgfhNPCMkbvDsJjtQ= +=hieJ +-----END PGP PRIVATE KEY BLOCK----- diff --git a/t/lib-gpg/ownertrust b/t/lib-gpg/ownertrust new file mode 100644 index 0000000000..b3e3c4f1cd --- /dev/null +++ b/t/lib-gpg/ownertrust @@ -0,0 +1,4 @@ +# List of assigned trustvalues, created Thu 11 Dec 2014 01:26:28 PM CET +# (Use "gpg --import-ownertrust" to restore them) +73D758744BE721698EC54E8713B6F51ECDDE430D:6: +D4BE22311AD3131E5EDA29A461092E85B7227189:3: diff --git a/t/lib-gpg/pubring.gpg b/t/lib-gpg/pubring.gpg Binary files differdeleted file mode 100644 index 1a3c2d487c..0000000000 --- a/t/lib-gpg/pubring.gpg +++ /dev/null diff --git a/t/lib-gpg/random_seed b/t/lib-gpg/random_seed Binary files differdeleted file mode 100644 index 95d249f15f..0000000000 --- a/t/lib-gpg/random_seed +++ /dev/null diff --git a/t/lib-gpg/secring.gpg b/t/lib-gpg/secring.gpg Binary files differdeleted file mode 100644 index 82dca8f80b..0000000000 --- a/t/lib-gpg/secring.gpg +++ /dev/null diff --git a/t/lib-gpg/trustdb.gpg b/t/lib-gpg/trustdb.gpg Binary files differdeleted file mode 100644 index 4879ae9a84..0000000000 --- a/t/lib-gpg/trustdb.gpg +++ /dev/null diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index 252cbf163b..fd53b57187 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -37,6 +37,11 @@ then test_done fi +if ! test_have_prereq SANITY; then + test_skip_or_die $GIT_TEST_HTTPD \ + "Cannot run httpd tests as root" +fi + HTTPD_PARA="" for DEFAULT_HTTPD_PATH in '/usr/sbin/httpd' '/usr/sbin/apache2' @@ -105,10 +110,15 @@ else "Could not identify web server at '$LIB_HTTPD_PATH'" fi +install_script () { + write_script "$HTTPD_ROOT_PATH/$1" <"$TEST_PATH/$1" +} + prepare_httpd() { mkdir -p "$HTTPD_DOCUMENT_ROOT_PATH" cp "$TEST_PATH"/passwd "$HTTPD_ROOT_PATH" - cp "$TEST_PATH"/broken-smart-http.sh "$HTTPD_ROOT_PATH" + install_script broken-smart-http.sh + install_script error.sh ln -s "$LIB_HTTPD_MODULE_PATH" "$HTTPD_ROOT_PATH/modules" @@ -132,7 +142,7 @@ prepare_httpd() { HTTPD_URL_USER=$HTTPD_PROTO://user%40host@$HTTPD_DEST HTTPD_URL_USER_PASS=$HTTPD_PROTO://user%40host:pass%40host@$HTTPD_DEST - if test -n "$LIB_HTTPD_DAV" -o -n "$LIB_HTTPD_SVN" + if test -n "$LIB_HTTPD_DAV" || test -n "$LIB_HTTPD_SVN" then HTTPD_PARA="$HTTPD_PARA -DDAV" diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 3a03e8263d..03a4c2ee84 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -68,6 +68,8 @@ LockFile accept.lock PassEnv GIT_VALGRIND PassEnv GIT_VALGRIND_OPTIONS +PassEnv GNUPGHOME +PassEnv ASAN_OPTIONS Alias /dumb/ www/ Alias /auth/dumb/ www/auth/dumb/ @@ -97,12 +99,16 @@ Alias /auth/dumb/ www/auth/dumb/ </LocationMatch> ScriptAliasMatch /smart_*[^/]*/(.*) ${GIT_EXEC_PATH}/git-http-backend/$1 ScriptAlias /broken_smart/ broken-smart-http.sh/ +ScriptAlias /error/ error.sh/ <Directory ${GIT_EXEC_PATH}> Options FollowSymlinks </Directory> <Files broken-smart-http.sh> Options ExecCGI </Files> +<Files error.sh> + Options ExecCGI +</Files> <Files ${GIT_EXEC_PATH}/git-http-backend> Options ExecCGI </Files> diff --git a/t/lib-httpd/broken-smart-http.sh b/t/lib-httpd/broken-smart-http.sh index f7ebfffa80..82cc610b0a 100755..100644 --- a/t/lib-httpd/broken-smart-http.sh +++ b/t/lib-httpd/broken-smart-http.sh @@ -1,4 +1,3 @@ -#!/bin/sh printf "Content-Type: text/%s\n" "html" echo printf "%s\n" "001e# service=git-upload-pack" diff --git a/t/lib-httpd/error.sh b/t/lib-httpd/error.sh new file mode 100755 index 0000000000..a77b8e5469 --- /dev/null +++ b/t/lib-httpd/error.sh @@ -0,0 +1,31 @@ +#!/bin/sh + +printf "Status: 500 Intentional Breakage\n" + +printf "Content-Type: " +charset=iso-8859-1 +case "$PATH_INFO" in +*html*) + printf "text/html" + ;; +*text*) + printf "text/plain" + ;; +*charset*) + printf "text/plain; charset=utf-8" + charset=utf-8 + ;; +*utf16*) + printf "text/plain; charset=utf-16" + charset=utf-16 + ;; +*odd-spacing*) + printf "text/plain; foo=bar ;charset=utf-16; other=nonsense" + charset=utf-16 + ;; +esac +printf "\n" + +printf "\n" +printf "this is the error message\n" | +iconv -f us-ascii -t $charset diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh new file mode 100755 index 0000000000..79cdd34a54 --- /dev/null +++ b/t/lib-submodule-update.sh @@ -0,0 +1,680 @@ +# Create a submodule layout used for all tests below. +# +# The following use cases are covered: +# - New submodule (no_submodule => add_sub1) +# - Removed submodule (add_sub1 => remove_sub1) +# - Updated submodule (add_sub1 => modify_sub1) +# - Submodule updated to invalid commit (add_sub1 => invalid_sub1) +# - Submodule updated from invalid commit (invalid_sub1 => valid_sub1) +# - Submodule replaced by tracked files in directory (add_sub1 => +# replace_sub1_with_directory) +# - Directory containing tracked files replaced by submodule +# (replace_sub1_with_directory => replace_directory_with_sub1) +# - Submodule replaced by tracked file with the same name (add_sub1 => +# replace_sub1_with_file) +# - Tracked file replaced by submodule (replace_sub1_with_file => +# replace_file_with_sub1) +# +# --O-----O +# / ^ replace_directory_with_sub1 +# / replace_sub1_with_directory +# /----O +# / ^ +# / modify_sub1 +# O------O-------O +# ^ ^\ ^ +# | | \ remove_sub1 +# | | -----O-----O +# | | \ ^ replace_file_with_sub1 +# | | \ replace_sub1_with_file +# | add_sub1 --O-----O +# no_submodule ^ valid_sub1 +# invalid_sub1 +# +create_lib_submodule_repo () { + git init submodule_update_repo && + ( + cd submodule_update_repo && + echo "expect" >>.gitignore && + echo "actual" >>.gitignore && + echo "x" >file1 && + echo "y" >file2 && + git add .gitignore file1 file2 && + git commit -m "Base" && + git branch "no_submodule" && + + git checkout -b "add_sub1" && + git submodule add ./. sub1 && + git config -f .gitmodules submodule.sub1.ignore all && + git config submodule.sub1.ignore all && + git add .gitmodules && + git commit -m "Add sub1" && + git checkout -b remove_sub1 && + git revert HEAD && + + git checkout -b "modify_sub1" "add_sub1" && + git submodule update && + ( + cd sub1 && + git fetch && + git checkout -b "modifications" && + echo "z" >file2 && + echo "x" >file3 && + git add file2 file3 && + git commit -m "modified file2 and added file3" && + git push origin modifications + ) && + git add sub1 && + git commit -m "Modify sub1" && + + git checkout -b "replace_sub1_with_directory" "add_sub1" && + git submodule update && + ( + cd sub1 && + git checkout modifications + ) && + git rm --cached sub1 && + rm sub1/.git* && + git config -f .gitmodules --remove-section "submodule.sub1" && + git add .gitmodules sub1/* && + git commit -m "Replace sub1 with directory" && + git checkout -b replace_directory_with_sub1 && + git revert HEAD && + + git checkout -b "replace_sub1_with_file" "add_sub1" && + git rm sub1 && + echo "content" >sub1 && + git add sub1 && + git commit -m "Replace sub1 with file" && + git checkout -b replace_file_with_sub1 && + git revert HEAD && + + git checkout -b "invalid_sub1" "add_sub1" && + git update-index --cacheinfo 160000 0123456789012345678901234567890123456789 sub1 && + git commit -m "Invalid sub1 commit" && + git checkout -b valid_sub1 && + git revert HEAD && + git checkout master + ) +} + +# Helper function to replace gitfile with .git directory +replace_gitfile_with_git_dir () { + ( + cd "$1" && + git_dir="$(git rev-parse --git-dir)" && + rm -f .git && + cp -R "$git_dir" .git && + GIT_WORK_TREE=. git config --unset core.worktree + ) +} + +# Test that the .git directory in the submodule is unchanged (except for the +# core.worktree setting, which appears only in $GIT_DIR/modules/$1/config). +# Call this function before test_submodule_content as the latter might +# write the index file leading to false positive index differences. +# +# Note that this only supports submodules at the root level of the +# superproject, with the default name, i.e. same as its path. +test_git_directory_is_unchanged () { + ( + cd ".git/modules/$1" && + # does core.worktree point at the right place? + test "$(git config core.worktree)" = "../../../$1" && + # remove it temporarily before comparing, as + # "$1/.git/config" lacks it... + git config --unset core.worktree + ) && + diff -r ".git/modules/$1" "$1/.git" && + ( + # ... and then restore. + cd ".git/modules/$1" && + git config core.worktree "../../../$1" + ) +} + +# Helper function to be executed at the start of every test below, it sets up +# the submodule repo if it doesn't exist and configures the most problematic +# settings for diff.ignoreSubmodules. +prolog () { + (test -d submodule_update_repo || create_lib_submodule_repo) && + test_config_global diff.ignoreSubmodules all && + test_config diff.ignoreSubmodules all +} + +# Helper function to bring work tree back into the state given by the +# commit. This includes trying to populate sub1 accordingly if it exists and +# should be updated to an existing commit. +reset_work_tree_to () { + rm -rf submodule_update && + git clone submodule_update_repo submodule_update && + ( + cd submodule_update && + rm -rf sub1 && + git checkout -f "$1" && + git status -u -s >actual && + test_must_be_empty actual && + sha1=$(git rev-parse --revs-only HEAD:sub1) && + if test -n "$sha1" && + test $(cd "sub1" && git rev-parse --verify "$sha1^{commit}") + then + git submodule update --init --recursive "sub1" + fi + ) +} + +# Test that the superproject contains the content according to commit "$1" +# (the work tree must match the index for everything but submodules but the +# index must exactly match the given commit including any submodule SHA-1s). +test_superproject_content () { + git diff-index --cached "$1" >actual && + test_must_be_empty actual && + git diff-files --ignore-submodules >actual && + test_must_be_empty actual +} + +# Test that the given submodule at path "$1" contains the content according +# to the submodule commit recorded in the superproject's commit "$2" +test_submodule_content () { + if test $# != 2 + then + echo "test_submodule_content needs two arguments" + return 1 + fi && + submodule="$1" && + commit="$2" && + test -d "$submodule"/ && + if ! test -f "$submodule"/.git && ! test -d "$submodule"/.git + then + echo "Submodule $submodule is not populated" + return 1 + fi && + sha1=$(git rev-parse --verify "$commit:$submodule") && + if test -z "$sha1" + then + echo "Couldn't retrieve SHA-1 of $submodule for $commit" + return 1 + fi && + ( + cd "$submodule" && + git status -u -s >actual && + test_must_be_empty actual && + git diff "$sha1" >actual && + test_must_be_empty actual + ) +} + +# Test that the following transitions are correctly handled: +# - Updated submodule +# - New submodule +# - Removed submodule +# - Directory containing tracked files replaced by submodule +# - Submodule replaced by tracked files in directory +# - Submodule replaced by tracked file with the same name +# - tracked file replaced by submodule +# +# The default is that submodule contents aren't changed until "git submodule +# update" is run. And even then that command doesn't delete the work tree of +# a removed submodule. +# +# Removing a submodule containing a .git directory must fail even when forced +# to protect the history! +# + +# Test that submodule contents are currently not updated when switching +# between commits that change a submodule. +test_submodule_switch () { + command="$1" + ######################### Appearing submodule ######################### + # Switching to a commit letting a submodule appear creates empty dir ... + if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1 + then + # Restoring stash fails to restore submodule index entry + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: added submodule creates empty directory" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... and doesn't care if it already exists ... + test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + mkdir sub1 && + git branch -t add_sub1 origin/add_sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... unless there is an untracked file in its place. + test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + >sub1 && + test_must_fail $command add_sub1 && + test_superproject_content origin/no_submodule && + test_must_be_empty sub1 + ) + ' + # Replacing a tracked file with a submodule produces an empty + # directory ... + test_expect_$RESULT "$command: replace tracked file with submodule creates empty directory" ' + prolog && + reset_work_tree_to replace_sub1_with_file && + ( + cd submodule_update && + git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && + $command replace_file_with_sub1 && + test_superproject_content origin/replace_file_with_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/replace_file_with_sub1 + ) + ' + # ... as does removing a directory with tracked files with a + # submodule. + if test "$KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR" = 1 + then + # Non fast-forward merges fail with "Directory sub1 doesn't + # exist. sub1" because the empty submodule directory is not + # created + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: replace directory with submodule" ' + prolog && + reset_work_tree_to replace_sub1_with_directory && + ( + cd submodule_update && + git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && + $command replace_directory_with_sub1 && + test_superproject_content origin/replace_directory_with_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/replace_directory_with_sub1 + ) + ' + + ######################## Disappearing submodule ####################### + # Removing a submodule doesn't remove its work tree ... + if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1 + then + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: removed submodule leaves submodule directory and its contents in place" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t remove_sub1 origin/remove_sub1 && + $command remove_sub1 && + test_superproject_content origin/remove_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... especially when it contains a .git directory. + test_expect_$RESULT "$command: removed submodule leaves submodule containing a .git directory alone" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t remove_sub1 origin/remove_sub1 && + replace_gitfile_with_git_dir sub1 && + $command remove_sub1 && + test_superproject_content origin/remove_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Replacing a submodule with files in a directory must fail as the + # submodule work tree isn't removed ... + if test "$KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES" = 1 + then + # Non fast-forward merges attempt to merge the former + # submodule files with the newly checked out ones in the + # directory of the same name while it shouldn't. + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: replace submodule with a directory must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && + test_must_fail $command replace_sub1_with_directory && + test_superproject_content origin/add_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... especially when it contains a .git directory. + test_expect_$RESULT "$command: replace submodule containing a .git directory with a directory must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && + replace_gitfile_with_git_dir sub1 && + test_must_fail $command replace_sub1_with_directory && + test_superproject_content origin/add_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Replacing it with a file must fail as it could throw away any local + # work tree changes ... + test_expect_failure "$command: replace submodule with a file must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_file origin/replace_sub1_with_file && + test_must_fail $command replace_sub1_with_file && + test_superproject_content origin/add_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... or even destroy unpushed parts of submodule history if that + # still uses a .git directory. + test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_file origin/replace_sub1_with_file && + replace_gitfile_with_git_dir sub1 && + test_must_fail $command replace_sub1_with_file && + test_superproject_content origin/add_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + + ########################## Modified submodule ######################### + # Updating a submodule sha1 doesn't update the submodule's work tree + if test "$KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT" = 1 + then + # When cherry picking a SHA-1 update for an ignored submodule + # the commit incorrectly fails with "The previous cherry-pick + # is now empty, possibly due to conflict resolution." + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: modified submodule does not update submodule work tree" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t modify_sub1 origin/modify_sub1 && + $command modify_sub1 && + test_superproject_content origin/modify_sub1 && + test_submodule_content sub1 origin/add_sub1 && + git submodule update && + test_submodule_content sub1 origin/modify_sub1 + ) + ' + + # Updating a submodule to an invalid sha1 doesn't update the + # submodule's work tree, subsequent update will fail + test_expect_$RESULT "$command: modified submodule does not update submodule work tree to invalid commit" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t invalid_sub1 origin/invalid_sub1 && + $command invalid_sub1 && + test_superproject_content origin/invalid_sub1 && + test_submodule_content sub1 origin/add_sub1 && + test_must_fail git submodule update && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Updating a submodule from an invalid sha1 doesn't update the + # submodule's work tree, subsequent update will succeed + test_expect_$RESULT "$command: modified submodule does not update submodule work tree from invalid commit" ' + prolog && + reset_work_tree_to invalid_sub1 && + ( + cd submodule_update && + git branch -t valid_sub1 origin/valid_sub1 && + $command valid_sub1 && + test_superproject_content origin/valid_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/valid_sub1 + ) + ' +} + +# Test that submodule contents are currently not updated when switching +# between commits that change a submodule, but throwing away local changes in +# the superproject is allowed. +test_submodule_forced_switch () { + command="$1" + ######################### Appearing submodule ######################### + # Switching to a commit letting a submodule appear creates empty dir ... + test_expect_success "$command: added submodule creates empty directory" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... and doesn't care if it already exists ... + test_expect_success "$command: added submodule leaves existing empty directory alone" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + mkdir sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... unless there is an untracked file in its place. + test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + >sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 + ) + ' + # Replacing a tracked file with a submodule produces an empty + # directory ... + test_expect_success "$command: replace tracked file with submodule creates empty directory" ' + prolog && + reset_work_tree_to replace_sub1_with_file && + ( + cd submodule_update && + git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && + $command replace_file_with_sub1 && + test_superproject_content origin/replace_file_with_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/replace_file_with_sub1 + ) + ' + # ... as does removing a directory with tracked files with a + # submodule. + test_expect_success "$command: replace directory with submodule" ' + prolog && + reset_work_tree_to replace_sub1_with_directory && + ( + cd submodule_update && + git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && + $command replace_directory_with_sub1 && + test_superproject_content origin/replace_directory_with_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/replace_directory_with_sub1 + ) + ' + + ######################## Disappearing submodule ####################### + # Removing a submodule doesn't remove its work tree ... + test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t remove_sub1 origin/remove_sub1 && + $command remove_sub1 && + test_superproject_content origin/remove_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... especially when it contains a .git directory. + test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t remove_sub1 origin/remove_sub1 && + replace_gitfile_with_git_dir sub1 && + $command remove_sub1 && + test_superproject_content origin/remove_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Replacing a submodule with files in a directory must fail as the + # submodule work tree isn't removed ... + test_expect_failure "$command: replace submodule with a directory must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && + test_must_fail $command replace_sub1_with_directory && + test_superproject_content origin/add_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... especially when it contains a .git directory. + test_expect_failure "$command: replace submodule containing a .git directory with a directory must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && + replace_gitfile_with_git_dir sub1 && + test_must_fail $command replace_sub1_with_directory && + test_superproject_content origin/add_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Replacing it with a file must fail as it could throw away any local + # work tree changes ... + test_expect_failure "$command: replace submodule with a file must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_file origin/replace_sub1_with_file && + test_must_fail $command replace_sub1_with_file && + test_superproject_content origin/add_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... or even destroy unpushed parts of submodule history if that + # still uses a .git directory. + test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_file origin/replace_sub1_with_file && + replace_gitfile_with_git_dir sub1 && + test_must_fail $command replace_sub1_with_file && + test_superproject_content origin/add_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + + ########################## Modified submodule ######################### + # Updating a submodule sha1 doesn't update the submodule's work tree + test_expect_success "$command: modified submodule does not update submodule work tree" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t modify_sub1 origin/modify_sub1 && + $command modify_sub1 && + test_superproject_content origin/modify_sub1 && + test_submodule_content sub1 origin/add_sub1 && + git submodule update && + test_submodule_content sub1 origin/modify_sub1 + ) + ' + # Updating a submodule to an invalid sha1 doesn't update the + # submodule's work tree, subsequent update will fail + test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t invalid_sub1 origin/invalid_sub1 && + $command invalid_sub1 && + test_superproject_content origin/invalid_sub1 && + test_submodule_content sub1 origin/add_sub1 && + test_must_fail git submodule update && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Updating a submodule from an invalid sha1 doesn't update the + # submodule's work tree, subsequent update will succeed + test_expect_success "$command: modified submodule does not update submodule work tree from invalid commit" ' + prolog && + reset_work_tree_to invalid_sub1 && + ( + cd submodule_update && + git branch -t valid_sub1 origin/valid_sub1 && + $command valid_sub1 && + test_superproject_content origin/valid_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/valid_sub1 + ) + ' +} diff --git a/t/lib-terminal.sh b/t/lib-terminal.sh index 51845491bb..cd220e378e 100644 --- a/t/lib-terminal.sh +++ b/t/lib-terminal.sh @@ -1,7 +1,7 @@ # Helpers for terminal output tests. # Catch tests which should depend on TTY but forgot to. There's no need -# to aditionally check that the TTY prereq is set here. If the test declared +# to additionally check that the TTY prereq is set here. If the test declared # it and we are running the test, then it must have been set. test_terminal () { if ! test_declared_prereq TTY diff --git a/t/perf/p5302-pack-index.sh b/t/perf/p5302-pack-index.sh index 6cb5b0d55b..5ee9211f98 100755 --- a/t/perf/p5302-pack-index.sh +++ b/t/perf/p5302-pack-index.sh @@ -8,7 +8,7 @@ test_perf_large_repo test_expect_success 'repack' ' git repack -ad && - PACK=`ls .git/objects/pack/*.pack | head -n1` && + PACK=$(ls .git/objects/pack/*.pack | head -n1) && test -f "$PACK" && export PACK ' diff --git a/t/perf/p5310-pack-bitmaps.sh b/t/perf/p5310-pack-bitmaps.sh index 685d46f8b7..f8ed8573b7 100755 --- a/t/perf/p5310-pack-bitmaps.sh +++ b/t/perf/p5310-pack-bitmaps.sh @@ -8,6 +8,9 @@ test_perf_large_repo # note that we do everything through config, # since we want to be able to compare bitmap-aware # git versus non-bitmap git +# +# We intentionally use the deprecated pack.writebitmaps +# config so that we can test against older versions of git. test_expect_success 'setup bitmap config' ' git config pack.writebitmaps true && git config pack.writebitmaphashcache true diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index a2bb63ce8e..f10ba4a01e 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -42,9 +42,9 @@ test_expect_success 'success is reported like this' ' : ' -run_sub_test_lib_test () { - name="$1" descr="$2" # stdin is the body of the test code - shift 2 +_run_sub_test_lib_test_common () { + neg="$1" name="$2" descr="$3" # stdin is the body of the test code + shift 3 mkdir "$name" && ( # Pretend we're not running under a test harness, whether we @@ -70,10 +70,23 @@ run_sub_test_lib_test () { export TEST_DIRECTORY && TEST_OUTPUT_DIRECTORY=$(pwd) && export TEST_OUTPUT_DIRECTORY && - ./"$name.sh" "$@" >out 2>err + if test -z "$neg" + then + ./"$name.sh" "$@" >out 2>err + else + ! ./"$name.sh" "$@" >out 2>err + fi ) } +run_sub_test_lib_test () { + _run_sub_test_lib_test_common '' "$@" +} + +run_sub_test_lib_test_err () { + _run_sub_test_lib_test_common '!' "$@" +} + check_sub_test_lib_test () { name="$1" # stdin is the expected output from the test ( @@ -84,6 +97,18 @@ check_sub_test_lib_test () { ) } +check_sub_test_lib_test_err () { + name="$1" # stdin is the expected output output from the test + # expected error output is in descriptior 3 + ( + cd "$name" && + sed -e 's/^> //' -e 's/Z$//' >expect.out && + test_cmp expect.out out && + sed -e 's/^> //' -e 's/Z$//' <&3 >expect.err && + test_cmp expect.err err + ) +} + test_expect_success 'pretend we have a fully passing test suite' " run_sub_test_lib_test full-pass '3 passing tests' <<-\\EOF && for i in 1 2 3 @@ -270,6 +295,398 @@ test_expect_success 'test --verbose-only' ' EOF ' +test_expect_success 'GIT_SKIP_TESTS' " + ( + GIT_SKIP_TESTS='git.2' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-basic \ + 'GIT_SKIP_TESTS' <<-\\EOF && + for i in 1 2 3 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-basic <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) + > ok 3 - passing test #3 + > # passed all 3 test(s) + > 1..3 + EOF + ) +" + +test_expect_success 'GIT_SKIP_TESTS several tests' " + ( + GIT_SKIP_TESTS='git.2 git.5' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-several \ + 'GIT_SKIP_TESTS several tests' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-several <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) + > ok 3 - passing test #3 + > ok 4 - passing test #4 + > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF + ) +" + +test_expect_success 'GIT_SKIP_TESTS sh pattern' " + ( + GIT_SKIP_TESTS='git.[2-5]' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-sh-pattern \ + 'GIT_SKIP_TESTS sh pattern' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-sh-pattern <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) + > ok 3 # skip passing test #3 (GIT_SKIP_TESTS) + > ok 4 # skip passing test #4 (GIT_SKIP_TESTS) + > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF + ) +" + +test_expect_success '--run basic' " + run_sub_test_lib_test run-basic \ + '--run basic' --run='1 3 5' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-basic <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (--run) + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with a range' " + run_sub_test_lib_test run-range \ + '--run with a range' --run='1-3' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-range <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 # skip passing test #5 (--run) + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with two ranges' " + run_sub_test_lib_test run-two-ranges \ + '--run with two ranges' --run='1-2 5-6' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-two-ranges <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with a left open range' " + run_sub_test_lib_test run-left-open-range \ + '--run with a left open range' --run='-3' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-left-open-range <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 # skip passing test #5 (--run) + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with a right open range' " + run_sub_test_lib_test run-right-open-range \ + '--run with a right open range' --run='4-' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-right-open-range <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 # skip passing test #2 (--run) + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with basic negation' " + run_sub_test_lib_test run-basic-neg \ + '--run with basic negation' --run='"'!3'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-basic-neg <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with two negations' " + run_sub_test_lib_test run-two-neg \ + '--run with two negations' --run='"'!3 !6'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-two-neg <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run a range and negation' " + run_sub_test_lib_test run-range-and-neg \ + '--run a range and negation' --run='"'-4 !2'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-range-and-neg <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (--run) + > ok 3 - passing test #3 + > ok 4 - passing test #4 + > ok 5 # skip passing test #5 (--run) + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run range negation' " + run_sub_test_lib_test run-range-neg \ + '--run range negation' --run='"'!1-3'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-range-neg <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 # skip passing test #2 (--run) + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run include, exclude and include' " + run_sub_test_lib_test run-inc-neg-inc \ + '--run include, exclude and include' \ + --run='"'1-5 !1-3 2'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-inc-neg-inc <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run include, exclude and include, comma separated' " + run_sub_test_lib_test run-inc-neg-inc-comma \ + '--run include, exclude and include, comma separated' \ + --run=1-5,\!1-3,2 <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-inc-neg-inc-comma <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run exclude and include' " + run_sub_test_lib_test run-neg-inc \ + '--run exclude and include' \ + --run='"'!3- 5'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-neg-inc <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run empty selectors' " + run_sub_test_lib_test run-empty-sel \ + '--run empty selectors' \ + --run='1,,3,,,5' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-empty-sel <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (--run) + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run invalid range start' " + run_sub_test_lib_test_err run-inv-range-start \ + '--run invalid range start' \ + --run='a-5' <<-\\EOF && + test_expect_success \"passing test #1\" 'true' + test_done + EOF + check_sub_test_lib_test_err run-inv-range-start \ + <<-\\EOF_OUT 3<<-\\EOF_ERR + > FATAL: Unexpected exit with code 1 + EOF_OUT + > error: --run: invalid non-numeric in range start: 'a-5' + EOF_ERR +" + +test_expect_success '--run invalid range end' " + run_sub_test_lib_test_err run-inv-range-end \ + '--run invalid range end' \ + --run='1-z' <<-\\EOF && + test_expect_success \"passing test #1\" 'true' + test_done + EOF + check_sub_test_lib_test_err run-inv-range-end \ + <<-\\EOF_OUT 3<<-\\EOF_ERR + > FATAL: Unexpected exit with code 1 + EOF_OUT + > error: --run: invalid non-numeric in range end: '1-z' + EOF_ERR +" + +test_expect_success '--run invalid selector' " + run_sub_test_lib_test_err run-inv-selector \ + '--run invalid selector' \ + --run='1?' <<-\\EOF && + test_expect_success \"passing test #1\" 'true' + test_done + EOF + check_sub_test_lib_test_err run-inv-selector \ + <<-\\EOF_OUT 3<<-\\EOF_ERR + > FATAL: Unexpected exit with code 1 + EOF_OUT + > error: --run: invalid non-numeric in test selector: '1?' + EOF_ERR +" + + test_set_prereq HAVEIT haveit=no test_expect_success HAVEIT 'test runs if prerequisite is satisfied' ' diff --git a/t/t0001-init.sh b/t/t0001-init.sh index bbc9cb60dd..7de8d85ee8 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -12,6 +12,13 @@ check_config () { echo "expected a directory $1, a file $1/config and $1/refs" return 1 fi + + if test_have_prereq POSIXPERM && test -x "$1/config" + then + echo "$1/config is executable?" + return 1 + fi + bare=$(cd "$1" && git config --bool core.bare) worktree=$(cd "$1" && git config core.worktree) || worktree=unset @@ -56,7 +63,7 @@ test_expect_success 'plain through aliased command, outside any git repo' ' check_config plain-aliased/.git false unset ' -test_expect_failure 'plain nested through aliased command' ' +test_expect_success 'plain nested through aliased command' ' ( git init plain-ancestor-aliased && cd plain-ancestor-aliased && @@ -68,7 +75,7 @@ test_expect_failure 'plain nested through aliased command' ' check_config plain-ancestor-aliased/plain-nested/.git false unset ' -test_expect_failure 'plain nested in bare through aliased command' ' +test_expect_success 'plain nested in bare through aliased command' ' ( git init --bare bare-ancestor-aliased.git && cd bare-ancestor-aliased.git && @@ -185,14 +192,14 @@ test_expect_success 'init --bare/--shared overrides system/global config' ' git init --bare --shared=0666 init-bare-shared-override && check_config init-bare-shared-override true unset && test x0666 = \ - x`git config -f init-bare-shared-override/config core.sharedRepository` + x$(git config -f init-bare-shared-override/config core.sharedRepository) ' test_expect_success 'init honors global core.sharedRepository' ' test_config_global core.sharedRepository 0666 && git init shared-honor-global && test x0666 = \ - x`git config -f shared-honor-global/.git/config core.sharedRepository` + x$(git config -f shared-honor-global/.git/config core.sharedRepository) ' test_expect_success 'init rejects insanely long --template' ' @@ -285,7 +292,7 @@ test_expect_success 'init prefers command line to GIT_DIR' ' test_expect_success 'init with separate gitdir' ' rm -rf newdir && git init --separate-git-dir realgitdir newdir && - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected newdir/.git && test_path_is_dir realgitdir/refs ' @@ -299,7 +306,7 @@ test_expect_success 're-init to update git link' ' cd newdir && git init --separate-git-dir ../surrealgitdir ) && - echo "gitdir: `pwd`/surrealgitdir" >expected && + echo "gitdir: $(pwd)/surrealgitdir" >expected && test_cmp expected newdir/.git && test_path_is_dir surrealgitdir/refs && test_path_is_missing realgitdir/refs @@ -312,7 +319,7 @@ test_expect_success 're-init to move gitdir' ' cd newdir && git init --separate-git-dir ../realgitdir ) && - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected newdir/.git && test_path_is_dir realgitdir/refs ' @@ -326,7 +333,7 @@ test_expect_success SYMLINKS 're-init to move gitdir symlink' ' ln -s here .git && git init --separate-git-dir ../realgitdir ) && - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected newdir/.git && test_cmp expected newdir/here && test_path_is_dir realgitdir/refs diff --git a/t/t0005-signals.sh b/t/t0005-signals.sh index 981437b3a8..aeea50c633 100755 --- a/t/t0005-signals.sh +++ b/t/t0005-signals.sh @@ -27,4 +27,26 @@ test_expect_success !MINGW 'signals are propagated using shell convention' ' test_expect_code 143 git sigterm ' +large_git () { + for i in $(test_seq 1 100) + do + git diff --cached --binary || return + done +} + +test_expect_success 'create blob' ' + test-genrandom foo 16384 >file && + git add file +' + +test_expect_success !MINGW 'a constipated git dies with SIGPIPE' ' + OUT=$( ((large_git; echo $? 1>&3) | :) 3>&1 ) + test "$OUT" -eq 141 +' + +test_expect_success !MINGW 'a constipated git dies with SIGPIPE even if parent ignores it' ' + OUT=$( ((trap "" PIPE; large_git; echo $? 1>&3) | :) 3>&1 ) + test "$OUT" -eq 141 +' + test_done diff --git a/t/t0006-date.sh b/t/t0006-date.sh index e53cf6d36d..fac0986134 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -82,4 +82,7 @@ check_approxidate 'Jun 6, 5AM' '2009-06-06 05:00:00' check_approxidate '5AM Jun 6' '2009-06-06 05:00:00' check_approxidate '6AM, June 7, 2009' '2009-06-07 06:00:00' +check_approxidate '2008-12-01' '2008-12-01 19:20:00' +check_approxidate '2009-12-01' '2009-12-01 19:20:00' + test_done diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index 39e55a13c8..8dc6939b90 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -806,7 +806,7 @@ test_expect_success !MINGW 'quoting allows trailing whitespace' ' test_cmp err.expect err ' -test_expect_success NOT_MINGW,NOT_CYGWIN 'correct handling of backslashes' ' +test_expect_success !MINGW,!CYGWIN 'correct handling of backslashes' ' rm -rf whitespace && mkdir whitespace && >"whitespace/trailing 1 " && diff --git a/t/t0010-racy-git.sh b/t/t0010-racy-git.sh index e45a9e40e4..5657c5a87b 100755 --- a/t/t0010-racy-git.sh +++ b/t/t0010-racy-git.sh @@ -14,7 +14,7 @@ do git update-index --add infocom echo xyzzy >infocom - files=`git diff-files -p` + files=$(git diff-files -p) test_expect_success \ "Racy GIT trial #$trial part A" \ 'test "" != "$files"' @@ -23,7 +23,7 @@ do echo xyzzy >cornerstone git update-index --add cornerstone - files=`git diff-files -p` + files=$(git diff-files -p) test_expect_success \ "Racy GIT trial #$trial part B" \ 'test "" != "$files"' diff --git a/t/t0011-hashmap.sh b/t/t0011-hashmap.sh index 391e2b6492..f97c80556f 100755 --- a/t/t0011-hashmap.sh +++ b/t/t0011-hashmap.sh @@ -237,4 +237,17 @@ test_expect_success 'grow / shrink' ' ' +test_expect_success 'string interning' ' + +test_hashmap "intern value1 +intern Value1 +intern value2 +intern value2 +" "value1 +Value1 +value2 +value2" + +' + test_done diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index e526184a0b..d2e51a81bc 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -20,14 +20,14 @@ test_expect_success setup ' git commit -m initial && - one=`git rev-parse HEAD:one` && - dir=`git rev-parse HEAD:dir` && - two=`git rev-parse HEAD:dir/two` && - three=`git rev-parse HEAD:three` && + one=$(git rev-parse HEAD:one) && + dir=$(git rev-parse HEAD:dir) && + two=$(git rev-parse HEAD:dir/two) && + three=$(git rev-parse HEAD:three) && for w in Some extra lines here; do echo $w; done >>one && git diff >patch.file && - patched=`git hash-object --stdin <one` && + patched=$(git hash-object --stdin <one) && git read-tree --reset -u HEAD && echo happy. @@ -111,7 +111,7 @@ test_expect_success 'update with autocrlf=input' ' } done && - differs=`git diff-index --cached HEAD` && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -135,7 +135,7 @@ test_expect_success 'update with autocrlf=true' ' } done && - differs=`git diff-index --cached HEAD` && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -158,9 +158,9 @@ test_expect_success 'checkout with autocrlf=true' ' break } done && - test "$one" = `git hash-object --stdin <one` && - test "$two" = `git hash-object --stdin <dir/two` && - differs=`git diff-index --cached HEAD` && + test "$one" = $(git hash-object --stdin <one) && + test "$two" = $(git hash-object --stdin <dir/two) && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -184,9 +184,9 @@ test_expect_success 'checkout with autocrlf=input' ' git update-index -- $f fi done && - test "$one" = `git hash-object --stdin <one` && - test "$two" = `git hash-object --stdin <dir/two` && - differs=`git diff-index --cached HEAD` && + test "$one" = $(git hash-object --stdin <one) && + test "$two" = $(git hash-object --stdin <dir/two) && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -200,7 +200,7 @@ test_expect_success 'apply patch (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply patch.file && - test "$patched" = "`git hash-object --stdin <one`" || { + test "$patched" = "$(git hash-object --stdin <one)" || { echo "Eh? apply without index" false } @@ -213,7 +213,7 @@ test_expect_success 'apply patch --cached (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply --cached patch.file && - test "$patched" = `git rev-parse :one` || { + test "$patched" = $(git rev-parse :one) || { echo "Eh? apply with --cached" false } @@ -226,8 +226,8 @@ test_expect_success 'apply patch --index (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply --index patch.file && - test "$patched" = `git rev-parse :one` && - test "$patched" = `git hash-object --stdin <one` || { + test "$patched" = $(git rev-parse :one) && + test "$patched" = $(git hash-object --stdin <one) || { echo "Eh? apply with --index" false } @@ -240,7 +240,7 @@ test_expect_success 'apply patch (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply patch.file && - test "$patched" = "`remove_cr <one | git hash-object --stdin`" || { + test "$patched" = "$(remove_cr <one | git hash-object --stdin)" || { echo "Eh? apply without index" false } @@ -253,7 +253,7 @@ test_expect_success 'apply patch --cached (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply --cached patch.file && - test "$patched" = `git rev-parse :one` || { + test "$patched" = $(git rev-parse :one) || { echo "Eh? apply without index" false } @@ -266,8 +266,8 @@ test_expect_success 'apply patch --index (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply --index patch.file && - test "$patched" = `git rev-parse :one` && - test "$patched" = "`remove_cr <one | git hash-object --stdin`" || { + test "$patched" = $(git rev-parse :one) && + test "$patched" = "$(remove_cr <one | git hash-object --stdin)" || { echo "Eh? apply with --index" false } diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index b92e6cb046..ca7d2a630a 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -153,17 +153,23 @@ test_expect_success 'filter shell-escaped filenames' ' : ' -test_expect_success 'required filter success' ' - git config filter.required.smudge cat && - git config filter.required.clean cat && +test_expect_success 'required filter should filter data' ' + git config filter.required.smudge ./rot13.sh && + git config filter.required.clean ./rot13.sh && git config filter.required.required true && echo "*.r filter=required" >.gitattributes && - echo test >test.r && + cat test.o >test.r && git add test.r && + rm -f test.r && - git checkout -- test.r + git checkout -- test.r && + cmp test.o test.r && + + ./rot13.sh <test.o >expected && + git cat-file blob :test.r >actual && + cmp expected actual ' test_expect_success 'required filter smudge failure' ' @@ -190,7 +196,13 @@ test_expect_success 'required filter clean failure' ' test_must_fail git add test.fc ' -test -n "$GIT_TEST_LONG" && test_set_prereq EXPENSIVE +test_expect_success 'filtering large input to small output should use little memory' ' + git config filter.devnull.clean "cat >/dev/null" && + git config filter.devnull.required true && + for i in $(test_seq 1 30); do printf "%1048576d" 1; done >30MB && + echo "30MB filter=devnull" >.gitattributes && + GIT_MMAP_LIMIT=1m GIT_ALLOC_LIMIT=1m git add 30MB +' test_expect_success EXPENSIVE 'filter large file' ' git config filter.largefile.smudge cat && diff --git a/t/t0025-crlf-auto.sh b/t/t0025-crlf-auto.sh index f5f67a6337..c164b4662a 100755 --- a/t/t0025-crlf-auto.sh +++ b/t/t0025-crlf-auto.sh @@ -12,144 +12,144 @@ test_expect_success setup ' git config core.autocrlf false && - for w in Hello world how are you; do echo $w; done >one && - for w in I am very very fine thank you; do echo ${w}Q; done | q_to_cr >two && - for w in Oh here is a QNUL byte how alarming; do echo ${w}; done | q_to_nul >three && + for w in Hello world how are you; do echo $w; done >LFonly && + for w in I am very very fine thank you; do echo ${w}Q; done | q_to_cr >CRLFonly && + for w in Oh here is a QNUL byte how alarming; do echo ${w}; done | q_to_nul >LFwithNUL && git add . && git commit -m initial && - one=`git rev-parse HEAD:one` && - two=`git rev-parse HEAD:two` && - three=`git rev-parse HEAD:three` && + LFonly=$(git rev-parse HEAD:LFonly) && + CRLFonly=$(git rev-parse HEAD:CRLFonly) && + LFwithNUL=$(git rev-parse HEAD:LFwithNUL) && echo happy. ' test_expect_success 'default settings cause no changes' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git read-tree --reset -u HEAD && - ! has_cr one && - has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - threediff=`git diff three` && - test -z "$onediff" -a -z "$twodiff" -a -z "$threediff" + ! has_cr LFonly && + has_cr CRLFonly && + LFonlydiff=$(git diff LFonly) && + CRLFonlydiff=$(git diff CRLFonly) && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFonlydiff" -a -z "$CRLFonlydiff" -a -z "$LFwithNULdiff" ' test_expect_success 'crlf=true causes a CRLF file to be normalized' ' # Backwards compatibility check - rm -f .gitattributes tmp one two three && - echo "two crlf" > .gitattributes && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && + echo "CRLFonly crlf" > .gitattributes && git read-tree --reset -u HEAD && # Note, "normalized" means that git will normalize it if added - has_cr two && - twodiff=`git diff two` && - test -n "$twodiff" + has_cr CRLFonly && + CRLFonlydiff=$(git diff CRLFonly) && + test -n "$CRLFonlydiff" ' test_expect_success 'text=true causes a CRLF file to be normalized' ' - rm -f .gitattributes tmp one two three && - echo "two text" > .gitattributes && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && + echo "CRLFonly text" > .gitattributes && git read-tree --reset -u HEAD && # Note, "normalized" means that git will normalize it if added - has_cr two && - twodiff=`git diff two` && - test -n "$twodiff" + has_cr CRLFonly && + CRLFonlydiff=$(git diff CRLFonly) && + test -n "$CRLFonlydiff" ' test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=false' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf false && - echo "one eol=crlf" > .gitattributes && + echo "LFonly eol=crlf" > .gitattributes && git read-tree --reset -u HEAD && - has_cr one && - onediff=`git diff one` && - test -z "$onediff" + has_cr LFonly && + LFonlydiff=$(git diff LFonly) && + test -z "$LFonlydiff" ' test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=input' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf input && - echo "one eol=crlf" > .gitattributes && + echo "LFonly eol=crlf" > .gitattributes && git read-tree --reset -u HEAD && - has_cr one && - onediff=`git diff one` && - test -z "$onediff" + has_cr LFonly && + LFonlydiff=$(git diff LFonly) && + test -z "$LFonlydiff" ' test_expect_success 'eol=lf gives a normalized file LFs with autocrlf=true' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf true && - echo "one eol=lf" > .gitattributes && + echo "LFonly eol=lf" > .gitattributes && git read-tree --reset -u HEAD && - ! has_cr one && - onediff=`git diff one` && - test -z "$onediff" + ! has_cr LFonly && + LFonlydiff=$(git diff LFonly) && + test -z "$LFonlydiff" ' test_expect_success 'autocrlf=true does not normalize CRLF files' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf true && git read-tree --reset -u HEAD && - has_cr one && - has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - threediff=`git diff three` && - test -z "$onediff" -a -z "$twodiff" -a -z "$threediff" + has_cr LFonly && + has_cr CRLFonly && + LFonlydiff=$(git diff LFonly) && + CRLFonlydiff=$(git diff CRLFonly) && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFonlydiff" -a -z "$CRLFonlydiff" -a -z "$LFwithNULdiff" ' test_expect_success 'text=auto, autocrlf=true _does_ normalize CRLF files' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf true && echo "* text=auto" > .gitattributes && git read-tree --reset -u HEAD && - has_cr one && - has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - threediff=`git diff three` && - test -z "$onediff" -a -n "$twodiff" -a -z "$threediff" + has_cr LFonly && + has_cr CRLFonly && + LFonlydiff=$(git diff LFonly) && + CRLFonlydiff=$(git diff CRLFonly) && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFonlydiff" -a -n "$CRLFonlydiff" -a -z "$LFwithNULdiff" ' test_expect_success 'text=auto, autocrlf=true does not normalize binary files' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf true && echo "* text=auto" > .gitattributes && git read-tree --reset -u HEAD && - ! has_cr three && - threediff=`git diff three` && - test -z "$threediff" + ! has_cr LFwithNUL && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFwithNULdiff" ' test_expect_success 'eol=crlf _does_ normalize binary files' ' - rm -f .gitattributes tmp one two three && - echo "three eol=crlf" > .gitattributes && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && + echo "LFwithNUL eol=crlf" > .gitattributes && git read-tree --reset -u HEAD && - has_cr three && - threediff=`git diff three` && - test -z "$threediff" + has_cr LFwithNUL && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFwithNULdiff" ' test_done diff --git a/t/t0026-eol-config.sh b/t/t0026-eol-config.sh index fe0164be62..c5203e232c 100755 --- a/t/t0026-eol-config.sh +++ b/t/t0026-eol-config.sh @@ -20,8 +20,8 @@ test_expect_success setup ' git commit -m initial && - one=`git rev-parse HEAD:one` && - two=`git rev-parse HEAD:two` && + one=$(git rev-parse HEAD:one) && + two=$(git rev-parse HEAD:two) && echo happy. ' @@ -34,9 +34,9 @@ test_expect_success 'eol=lf puts LFs in normalized file' ' ! has_cr one && ! has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_expect_success 'eol=crlf puts CRLFs in normalized file' ' @@ -47,9 +47,9 @@ test_expect_success 'eol=crlf puts CRLFs in normalized file' ' has_cr one && ! has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_expect_success 'autocrlf=true overrides eol=lf' ' @@ -61,9 +61,9 @@ test_expect_success 'autocrlf=true overrides eol=lf' ' has_cr one && has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_expect_success 'autocrlf=true overrides unset eol' ' @@ -75,9 +75,29 @@ test_expect_success 'autocrlf=true overrides unset eol' ' has_cr one && has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" +' + +test_expect_success NATIVE_CRLF 'eol native is crlf' ' + + rm -rf native_eol && mkdir native_eol && + ( + cd native_eol && + printf "*.txt text\n" >.gitattributes && + printf "one\r\ntwo\r\nthree\r\n" >filedos.txt && + printf "one\ntwo\nthree\n" >fileunix.txt && + git init && + git config core.autocrlf false && + git config core.eol native && + git add filedos.txt fileunix.txt && + git commit -m "first" && + rm file*.txt && + git reset --hard HEAD && + has_cr filedos.txt && + has_cr fileunix.txt + ) ' test_done diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh new file mode 100755 index 0000000000..452320df83 --- /dev/null +++ b/t/t0027-auto-crlf.sh @@ -0,0 +1,335 @@ +#!/bin/sh + +test_description='CRLF conversion all combinations' + +. ./test-lib.sh + +if ! test_have_prereq EXPENSIVE +then + skip_all="EXPENSIVE not set" + test_done +fi + +compare_files () { + tr '\015\000' QN <"$1" >"$1".expect && + tr '\015\000' QN <"$2" >"$2".actual && + test_cmp "$1".expect "$2".actual && + rm "$1".expect "$2".actual +} + +compare_ws_file () { + pfx=$1 + exp=$2.expect + act=$pfx.actual.$3 + tr '\015\000' QN <"$2" >"$exp" && + tr '\015\000' QN <"$3" >"$act" && + test_cmp $exp $act && + rm $exp $act +} + +create_gitattributes () { + attr=$1 + case "$attr" in + auto) + echo "*.txt text=auto" >.gitattributes + ;; + text) + echo "*.txt text" >.gitattributes + ;; + -text) + echo "*.txt -text" >.gitattributes + ;; + crlf) + echo "*.txt eol=crlf" >.gitattributes + ;; + lf) + echo "*.txt eol=lf" >.gitattributes + ;; + "") + echo >.gitattributes + ;; + *) + echo >&2 invalid attribute: $attr + exit 1 + ;; + esac +} + +check_warning () { + case "$1" in + LF_CRLF) grep "LF will be replaced by CRLF" $2;; + CRLF_LF) grep "CRLF will be replaced by LF" $2;; + '') + >expect + grep "will be replaced by" $2 >actual + test_cmp expect actual + ;; + *) false ;; + esac +} + +create_file_in_repo () { + crlf=$1 + attr=$2 + lfname=$3 + crlfname=$4 + lfmixcrlf=$5 + lfmixcr=$6 + crlfnul=$7 + create_gitattributes "$attr" && + pfx=crlf_${crlf}_attr_${attr} + for f in LF CRLF LF_mix_CR CRLF_mix_LF CRLF_nul + do + fname=${pfx}_$f.txt && + cp $f $fname && + git -c core.autocrlf=$crlf add $fname 2>"${pfx}_$f.err" + done && + git commit -m "core.autocrlf $crlf" && + check_warning "$lfname" ${pfx}_LF.err && + check_warning "$crlfname" ${pfx}_CRLF.err && + check_warning "$lfmixcrlf" ${pfx}_CRLF_mix_LF.err && + check_warning "$lfmixcr" ${pfx}_LF_mix_CR.err && + check_warning "$crlfnul" ${pfx}_CRLF_nul.err +} + +check_files_in_repo () { + crlf=$1 + attr=$2 + lfname=$3 + crlfname=$4 + lfmixcrlf=$5 + lfmixcr=$6 + crlfnul=$7 + pfx=crlf_${crlf}_attr_${attr}_ && + compare_files $lfname ${pfx}LF.txt && + compare_files $crlfname ${pfx}CRLF.txt && + compare_files $lfmixcrlf ${pfx}CRLF_mix_LF.txt && + compare_files $lfmixcr ${pfx}LF_mix_CR.txt && + compare_files $crlfnul ${pfx}CRLF_nul.txt +} + + +check_files_in_ws () { + eol=$1 + crlf=$2 + attr=$3 + lfname=$4 + crlfname=$5 + lfmixcrlf=$6 + lfmixcr=$7 + crlfnul=$8 + create_gitattributes $attr && + git config core.autocrlf $crlf && + pfx=eol_${eol}_crlf_${crlf}_attr_${attr}_ && + src=crlf_false_attr__ && + for f in LF CRLF LF_mix_CR CRLF_mix_LF CRLF_nul + do + rm $src$f.txt && + if test -z "$eol"; then + git checkout $src$f.txt + else + git -c core.eol=$eol checkout $src$f.txt + fi + done + + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=LF" " + compare_ws_file $pfx $lfname ${src}LF.txt + " + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=CRLF" " + compare_ws_file $pfx $crlfname ${src}CRLF.txt + " + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=CRLF_mix_LF" " + compare_ws_file $pfx $lfmixcrlf ${src}CRLF_mix_LF.txt + " + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=LF_mix_CR" " + compare_ws_file $pfx $lfmixcr ${src}LF_mix_CR.txt + " + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=CRLF_nul" " + compare_ws_file $pfx $crlfnul ${src}CRLF_nul.txt + " +} + +####### +test_expect_success 'setup master' ' + echo >.gitattributes && + git checkout -b master && + git add .gitattributes && + git commit -m "add .gitattributes" "" && + printf "line1\nline2\nline3" >LF && + printf "line1\r\nline2\r\nline3" >CRLF && + printf "line1\r\nline2\nline3" >CRLF_mix_LF && + printf "line1\nline2\rline3" >LF_mix_CR && + printf "line1\r\nline2\rline3" >CRLF_mix_CR && + printf "line1Q\r\nline2\r\nline3" | q_to_nul >CRLF_nul && + printf "line1Q\nline2\nline3" | q_to_nul >LF_nul +' + + + +warn_LF_CRLF="LF will be replaced by CRLF" +warn_CRLF_LF="CRLF will be replaced by LF" + +test_expect_success 'add files empty attr' ' + create_file_in_repo false "" "" "" "" "" "" && + create_file_in_repo true "" "LF_CRLF" "" "LF_CRLF" "" "" && + create_file_in_repo input "" "" "CRLF_LF" "CRLF_LF" "" "" +' + +test_expect_success 'add files attr=auto' ' + create_file_in_repo false "auto" "" "CRLF_LF" "CRLF_LF" "" "" && + create_file_in_repo true "auto" "LF_CRLF" "" "LF_CRLF" "" "" && + create_file_in_repo input "auto" "" "CRLF_LF" "CRLF_LF" "" "" +' + +test_expect_success 'add files attr=text' ' + create_file_in_repo false "text" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + create_file_in_repo true "text" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && + create_file_in_repo input "text" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" +' + +test_expect_success 'add files attr=-text' ' + create_file_in_repo false "-text" "" "" "" "" "" && + create_file_in_repo true "-text" "" "" "" "" "" && + create_file_in_repo input "-text" "" "" "" "" "" +' + +test_expect_success 'add files attr=lf' ' + create_file_in_repo false "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + create_file_in_repo true "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + create_file_in_repo input "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" +' + +test_expect_success 'add files attr=crlf' ' + create_file_in_repo false "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && + create_file_in_repo true "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && + create_file_in_repo input "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" +' + +test_expect_success 'create files cleanup' ' + rm -f *.txt && + git reset --hard +' + +test_expect_success 'commit empty gitattribues' ' + check_files_in_repo false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul && + check_files_in_repo true "" LF LF LF LF_mix_CR CRLF_nul && + check_files_in_repo input "" LF LF LF LF_mix_CR CRLF_nul +' + +test_expect_success 'commit text=auto' ' + check_files_in_repo false "auto" LF LF LF LF_mix_CR CRLF_nul && + check_files_in_repo true "auto" LF LF LF LF_mix_CR CRLF_nul && + check_files_in_repo input "auto" LF LF LF LF_mix_CR CRLF_nul +' + +test_expect_success 'commit text' ' + check_files_in_repo false "text" LF LF LF LF_mix_CR LF_nul && + check_files_in_repo true "text" LF LF LF LF_mix_CR LF_nul && + check_files_in_repo input "text" LF LF LF LF_mix_CR LF_nul +' + +test_expect_success 'commit -text' ' + check_files_in_repo false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul && + check_files_in_repo true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul && + check_files_in_repo input "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +' + +################################################################################ +# Check how files in the repo are changed when they are checked out +# How to read the table below: +# - check_files_in_ws will check multiple files with a combination of settings +# and attributes (core.autocrlf=input is forbidden with core.eol=crlf) +# - parameter $1 : core.eol lf | crlf +# - parameter $2 : core.autocrlf false | true | input +# - parameter $3 : text in .gitattributs "" (empty) | auto | text | -text +# - parameter $4 : reference for a file with only LF in the repo +# - parameter $5 : reference for a file with only CRLF in the repo +# - parameter $6 : reference for a file with mixed LF and CRLF in the repo +# - parameter $7 : reference for a file with LF and CR in the repo (does somebody uses this ?) +# - parameter $8 : reference for a file with CRLF and a NUL (should be handled as binary when auto) + +# What we have in the repo: +# ----------------- EOL in repo ---------------- +# LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +# settings with checkout: +# core. core. .gitattr +# eol acrlf +# ---------------------------------------------- +# What we want to have in the working tree: +if test_have_prereq MINGW +then +MIX_CRLF_LF=CRLF +MIX_LF_CR=CRLF_mix_CR +NL=CRLF +else +MIX_CRLF_LF=CRLF_mix_LF +MIX_LF_CR=LF_mix_CR +NL=LF +fi +export CRLF_MIX_LF_CR MIX NL + +check_files_in_ws lf false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf input "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf false "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul +check_files_in_ws lf input "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf false "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws lf input "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf input "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf false "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf true "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf input "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws lf true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws lf input "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + +check_files_in_ws crlf false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws crlf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws crlf false "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul +check_files_in_ws crlf true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul +check_files_in_ws crlf false "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws crlf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws crlf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws crlf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws crlf false "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws crlf true "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws crlf false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws crlf true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + +check_files_in_ws "" false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" input "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" false "auto" $NL CRLF $MIX_CRLF_LF LF_mix_CR CRLF_nul +check_files_in_ws "" true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul +check_files_in_ws "" input "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" false "text" $NL CRLF $MIX_CRLF_LF $MIX_LF_CR CRLF_nul +check_files_in_ws "" true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws "" input "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" input "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" false "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" true "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" input "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws "" true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws "" input "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + +check_files_in_ws native false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native false "auto" $NL CRLF $MIX_CRLF_LF LF_mix_CR CRLF_nul +check_files_in_ws native true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul +check_files_in_ws native false "text" $NL CRLF $MIX_CRLF_LF $MIX_LF_CR CRLF_nul +check_files_in_ws native true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws native false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native false "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native true "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws native true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + +test_done diff --git a/t/t0030-stripspace.sh b/t/t0030-stripspace.sh index a8e84d8546..29e91d861c 100755 --- a/t/t0030-stripspace.sh +++ b/t/t0030-stripspace.sh @@ -225,22 +225,22 @@ test_expect_success \ test_expect_success \ 'text without newline at end should end with newline' ' - test `printf "$ttt" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$ttt" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$ttt$ttt" | git stripspace | wc -l` -gt 0 + test $(printf "$ttt" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$ttt" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$ttt$ttt" | git stripspace | wc -l) -gt 0 ' # text plus spaces at the end: test_expect_success \ 'text plus spaces without newline at end should end with newline' ' - test `printf "$ttt$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$ttt$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$sss$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$sss$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$sss$sss$sss" | git stripspace | wc -l` -gt 0 + test $(printf "$ttt$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$ttt$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$sss$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$sss$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$sss$sss$sss" | git stripspace | wc -l) -gt 0 ' test_expect_success \ @@ -432,4 +432,10 @@ test_expect_success '-c with changed comment char' ' test_cmp expect actual ' +test_expect_success 'avoid SP-HT sequence in commented line' ' + printf "#\tone\n#\n# two\n" >expect && + printf "\tone\n\ntwo\n" | git stripspace -c >actual && + test_cmp expect actual +' + test_done diff --git a/t/t0050-filesystem.sh b/t/t0050-filesystem.sh index 6b3cedcf24..988c3925d5 100755 --- a/t/t0050-filesystem.sh +++ b/t/t0050-filesystem.sh @@ -64,7 +64,7 @@ test_expect_success "setup case tests" ' git checkout -f master ' -$test_case 'rename (case change)' ' +test_expect_success 'rename (case change)' ' git mv camelcase CamelCase && git commit -m "rename" ' diff --git a/t/t0064-sha1-array.sh b/t/t0064-sha1-array.sh new file mode 100755 index 0000000000..50b31ffe75 --- /dev/null +++ b/t/t0064-sha1-array.sh @@ -0,0 +1,94 @@ +#!/bin/sh + +test_description='basic tests for the SHA1 array implementation' +. ./test-lib.sh + +echo20 () { + prefix="${1:+$1 }" + shift + while test $# -gt 0 + do + echo "$prefix$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1" + shift + done +} + +test_expect_success 'ordered enumeration' ' + echo20 "" 44 55 88 aa >expect && + { + echo20 append 88 44 aa 55 && + echo for_each_unique + } | test-sha1-array >actual && + test_cmp expect actual +' + +test_expect_success 'ordered enumeration with duplicate suppression' ' + echo20 "" 44 55 88 aa >expect && + { + echo20 append 88 44 aa 55 && + echo20 append 88 44 aa 55 && + echo for_each_unique + } | test-sha1-array >actual && + test_cmp expect actual +' + +test_expect_success 'lookup' ' + { + echo20 append 88 44 aa 55 && + echo20 lookup 55 + } | test-sha1-array >actual && + n=$(cat actual) && + test "$n" -eq 1 +' + +test_expect_success 'lookup non-existing entry' ' + { + echo20 append 88 44 aa 55 && + echo20 lookup 33 + } | test-sha1-array >actual && + n=$(cat actual) && + test "$n" -lt 0 +' + +test_expect_success 'lookup with duplicates' ' + { + echo20 append 88 44 aa 55 && + echo20 append 88 44 aa 55 && + echo20 lookup 55 + } | test-sha1-array >actual && + n=$(cat actual) && + test "$n" -ge 2 && + test "$n" -le 3 +' + +test_expect_success 'lookup non-existing entry with duplicates' ' + { + echo20 append 88 44 aa 55 && + echo20 append 88 44 aa 55 && + echo20 lookup 66 + } | test-sha1-array >actual && + n=$(cat actual) && + test "$n" -lt 0 +' + +test_expect_success 'lookup with almost duplicate values' ' + { + echo "append 5555555555555555555555555555555555555555" && + echo "append 555555555555555555555555555555555555555f" && + echo20 lookup 55 + } | test-sha1-array >actual && + n=$(cat actual) && + test "$n" -eq 0 +' + +test_expect_success 'lookup with single duplicate value' ' + { + echo20 append 55 55 && + echo20 lookup 55 + } | test-sha1-array >actual && + n=$(cat actual) && + test "$n" -ge 0 && + test "$n" -le 1 +' + +test_done diff --git a/t/t0081-line-buffer.sh b/t/t0081-line-buffer.sh index bd83ed371a..ce92e6acad 100755 --- a/t/t0081-line-buffer.sh +++ b/t/t0081-line-buffer.sh @@ -29,7 +29,7 @@ test_expect_success '0-length read, send along greeting' ' test_cmp expect actual ' -test_expect_success 'read from file descriptor' ' +test_expect_success !MINGW 'read from file descriptor' ' rm -f input && echo hello >expect && echo hello >input && diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh index 6c33e28ee8..601d02d71f 100755 --- a/t/t0090-cache-tree.sh +++ b/t/t0090-cache-tree.sh @@ -8,7 +8,7 @@ cache-tree extension. . ./test-lib.sh cmp_cache_tree () { - test-dump-cache-tree >actual && + test-dump-cache-tree | sed -e '/#(ref)/d' >actual && sed "s/$_x40/SHA/" <actual >filtered && test_cmp "$1" filtered } @@ -16,15 +16,40 @@ cmp_cache_tree () { # We don't bother with actually checking the SHA1: # test-dump-cache-tree already verifies that all existing data is # correct. -test_shallow_cache_tree () { - printf "SHA (%d entries, 0 subtrees)\n" $(git ls-files|wc -l) >expect && +generate_expected_cache_tree_rec () { + dir="$1${1:+/}" && + parent="$2" && + # ls-files might have foo/bar, foo/bar/baz, and foo/bar/quux + # We want to count only foo because it's the only direct child + subtrees=$(git ls-files|grep /|cut -d / -f 1|uniq) && + subtree_count=$(echo "$subtrees"|awk -v c=0 '$1 != "" {++c} END {print c}') && + entries=$(git ls-files|wc -l) && + printf "SHA $dir (%d entries, %d subtrees)\n" "$entries" "$subtree_count" && + for subtree in $subtrees + do + cd "$subtree" + generate_expected_cache_tree_rec "$dir$subtree" "$dir" || return 1 + cd .. + done && + dir=$parent +} + +generate_expected_cache_tree () { + ( + generate_expected_cache_tree_rec + ) +} + +test_cache_tree () { + generate_expected_cache_tree >expect && cmp_cache_tree expect } test_invalid_cache_tree () { - echo "invalid (0 subtrees)" >expect && - printf "SHA #(ref) (%d entries, 0 subtrees)\n" $(git ls-files|wc -l) >>expect && - cmp_cache_tree expect + printf "invalid %s ()\n" "" "$@" >expect && + test-dump-cache-tree | + sed -n -e "s/[0-9]* subtrees//" -e '/#(ref)/d' -e '/^invalid /p' >actual && + test_cmp expect actual } test_no_cache_tree () { @@ -32,26 +57,59 @@ test_no_cache_tree () { cmp_cache_tree expect } -test_expect_failure 'initial commit has cache-tree' ' +test_expect_success 'initial commit has cache-tree' ' test_commit foo && - test_shallow_cache_tree + test_cache_tree ' test_expect_success 'read-tree HEAD establishes cache-tree' ' git read-tree HEAD && - test_shallow_cache_tree + test_cache_tree ' test_expect_success 'git-add invalidates cache-tree' ' test_when_finished "git reset --hard; git read-tree HEAD" && - echo "I changed this file" > foo && + echo "I changed this file" >foo && git add foo && test_invalid_cache_tree ' +test_expect_success 'git-add in subdir invalidates cache-tree' ' + test_when_finished "git reset --hard; git read-tree HEAD" && + mkdir dirx && + echo "I changed this file" >dirx/foo && + git add dirx/foo && + test_invalid_cache_tree +' + +cat >before <<\EOF +SHA (3 entries, 2 subtrees) +SHA dir1/ (1 entries, 0 subtrees) +SHA dir2/ (1 entries, 0 subtrees) +EOF + +cat >expect <<\EOF +invalid (2 subtrees) +invalid dir1/ (0 subtrees) +SHA dir2/ (1 entries, 0 subtrees) +EOF + +test_expect_success 'git-add in subdir does not invalidate sibling cache-tree' ' + git tag no-children && + test_when_finished "git reset --hard no-children; git read-tree HEAD" && + mkdir dir1 dir2 && + test_commit dir1/a && + test_commit dir2/b && + echo "I changed this file" >dir1/a && + cmp_cache_tree before && + echo "I changed this file" >dir1/a && + git add dir1/a && + cmp_cache_tree expect +' + test_expect_success 'update-index invalidates cache-tree' ' test_when_finished "git reset --hard; git read-tree HEAD" && - echo "I changed this file" > foo && + echo "I changed this file" >foo && git update-index --add foo && test_invalid_cache_tree ' @@ -59,7 +117,7 @@ test_expect_success 'update-index invalidates cache-tree' ' test_expect_success 'write-tree establishes cache-tree' ' test-scrap-cache-tree && git write-tree && - test_shallow_cache_tree + test_cache_tree ' test_expect_success 'test-scrap-cache-tree works' ' @@ -70,24 +128,94 @@ test_expect_success 'test-scrap-cache-tree works' ' test_expect_success 'second commit has cache-tree' ' test_commit bar && - test_shallow_cache_tree + test_cache_tree +' + +test_expect_success PERL 'commit --interactive gives cache-tree on partial commit' ' + cat <<-\EOT >foo.c && + int foo() + { + return 42; + } + int bar() + { + return 42; + } + EOT + git add foo.c && + test_invalid_cache_tree && + git commit -m "add a file" && + test_cache_tree && + cat <<-\EOT >foo.c && + int foo() + { + return 43; + } + int bar() + { + return 44; + } + EOT + (echo p; echo 1; echo; echo s; echo n; echo y; echo q) | + git commit --interactive -m foo && + test_cache_tree +' + +test_expect_success 'commit in child dir has cache-tree' ' + mkdir dir && + >dir/child.t && + git add dir/child.t && + git commit -m dir/child.t && + test_cache_tree ' test_expect_success 'reset --hard gives cache-tree' ' test-scrap-cache-tree && git reset --hard && - test_shallow_cache_tree + test_cache_tree ' test_expect_success 'reset --hard without index gives cache-tree' ' rm -f .git/index && git reset --hard && - test_shallow_cache_tree + test_cache_tree ' -test_expect_failure 'checkout gives cache-tree' ' +test_expect_success 'checkout gives cache-tree' ' + git tag current && git checkout HEAD^ && - test_shallow_cache_tree + test_cache_tree +' + +test_expect_success 'checkout -b gives cache-tree' ' + git checkout current && + git checkout -b prev HEAD^ && + test_cache_tree +' + +test_expect_success 'checkout -B gives cache-tree' ' + git checkout current && + git checkout -B prev HEAD^ && + test_cache_tree +' + +test_expect_success 'partial commit gives cache-tree' ' + git checkout -b partial no-children && + test_commit one && + test_commit two && + echo "some change" >one.t && + git add one.t && + echo "some other change" >two.t && + git commit two.t -m partial && + test_cache_tree +' + +test_expect_success 'no phantom error when switching trees' ' + mkdir newdir && + >newdir/one && + git add newdir/one && + git checkout 2>errors && + ! test -s errors ' test_done diff --git a/t/t0110-urlmatch-normalization.sh b/t/t0110-urlmatch-normalization.sh index 8d6096d4d1..410d5768ca 100755 --- a/t/t0110-urlmatch-normalization.sh +++ b/t/t0110-urlmatch-normalization.sh @@ -117,7 +117,7 @@ test_expect_success 'url general escapes' ' test "$(test-urlmatch-normalization -p "X://W?'\!'")" = "x://w/?'\!'" ' -test_expect_success 'url high-bit escapes' ' +test_expect_success !MINGW 'url high-bit escapes' ' test "$(test-urlmatch-normalization -p "$(cat "$tu-1")")" = "x://q/%01%02%03%04%05%06%07%08%0E%0F%10%11%12" && test "$(test-urlmatch-normalization -p "$(cat "$tu-2")")" = "x://q/%13%14%15%16%17%18%19%1B%1C%1D%1E%1F%7F" && test "$(test-urlmatch-normalization -p "$(cat "$tu-3")")" = "x://q/%80%81%82%83%84%85%86%87%88%89%8A%8B%8C%8D%8E%8F" && @@ -127,7 +127,10 @@ test_expect_success 'url high-bit escapes' ' test "$(test-urlmatch-normalization -p "$(cat "$tu-7")")" = "x://q/%C0%C1%C2%C3%C4%C5%C6%C7%C8%C9%CA%CB%CC%CD%CE%CF" && test "$(test-urlmatch-normalization -p "$(cat "$tu-8")")" = "x://q/%D0%D1%D2%D3%D4%D5%D6%D7%D8%D9%DA%DB%DC%DD%DE%DF" && test "$(test-urlmatch-normalization -p "$(cat "$tu-9")")" = "x://q/%E0%E1%E2%E3%E4%E5%E6%E7%E8%E9%EA%EB%EC%ED%EE%EF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-10")")" = "x://q/%F0%F1%F2%F3%F4%F5%F6%F7%F8%F9%FA%FB%FC%FD%FE%FF" && + test "$(test-urlmatch-normalization -p "$(cat "$tu-10")")" = "x://q/%F0%F1%F2%F3%F4%F5%F6%F7%F8%F9%FA%FB%FC%FD%FE%FF" +' + +test_expect_success 'url utf-8 escapes' ' test "$(test-urlmatch-normalization -p "$(cat "$tu-11")")" = "x://q/%C2%80%DF%BF%E0%A0%80%EF%BF%BD%F0%90%80%80%F0%AF%BF%BD" ' diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index 538ea5fb1c..d7ef44b4a2 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -6,7 +6,7 @@ test_description='basic credential helper tests' test_expect_success 'setup helper scripts' ' cat >dump <<-\EOF && - whoami=`echo $0 | sed s/.*git-credential-//` + whoami=$(echo $0 | sed s/.*git-credential-//) echo >&2 "$whoami: $*" OIFS=$IFS IFS== @@ -289,4 +289,13 @@ test_expect_success 'http paths can be part of context' ' EOF ' +test_expect_success 'helpers can abort the process' ' + test_must_fail git \ + -c credential.helper="!f() { echo quit=1; }; f" \ + -c credential.helper="verbatim foo bar" \ + credential fill >stdout && + >expect && + test_cmp expect stdout +' + test_done diff --git a/t/t1000-read-tree-m-3way.sh b/t/t1000-read-tree-m-3way.sh index babcdd2343..a0b79b4839 100755 --- a/t/t1000-read-tree-m-3way.sh +++ b/t/t1000-read-tree-m-3way.sh @@ -519,10 +519,10 @@ test_expect_success \ 'rm -f .git/index F16 && echo F16 >F16 && git update-index --add F16 && - tree0=`git write-tree` && + tree0=$(git write-tree) && echo E16 >F16 && git update-index F16 && - tree1=`git write-tree` && + tree1=$(git write-tree) && read_tree_must_succeed -m $tree0 $tree1 $tree1 $tree0 && git ls-files --stage' diff --git a/t/t1001-read-tree-m-2way.sh b/t/t1001-read-tree-m-2way.sh index 3a24abf549..db1b6f5cf4 100755 --- a/t/t1001-read-tree-m-2way.sh +++ b/t/t1001-read-tree-m-2way.sh @@ -36,7 +36,7 @@ compare_change () { } check_cache_at () { - clean_if_empty=`git diff-files -- "$1"` + clean_if_empty=$(git diff-files -- "$1") case "$clean_if_empty" in '') echo "$1: clean" ;; ?*) echo "$1: dirty" ;; @@ -68,14 +68,14 @@ test_expect_success \ echo rezrov >rezrov && echo yomin >yomin && git update-index --add nitfol bozbar rezrov && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH && cat bozbar-new >bozbar && git update-index --add frotz bozbar --force-remove rezrov && git ls-files --stage >M.out && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && git diff-tree $treeH $treeM' @@ -315,7 +315,7 @@ test_expect_success \ 'rm -f .git/index && echo DF >DF && git update-index --add DF && - treeDF=`git write-tree` && + treeDF=$(git write-tree) && echo treeDF $treeDF && git ls-tree $treeDF && @@ -323,7 +323,7 @@ test_expect_success \ mkdir DF && echo DF/DF >DF/DF && git update-index --add --remove DF DF/DF && - treeDFDF=`git write-tree` && + treeDFDF=$(git write-tree) && echo treeDFDF $treeDFDF && git ls-tree $treeDFDF && git ls-files --stage >DFDF.out' @@ -345,7 +345,7 @@ test_expect_success \ 'rm -f .git/index && : >a && git update-index --add a && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && git ls-files --stage >treeM.out && @@ -354,7 +354,7 @@ test_expect_success \ git update-index --remove a && mkdir a && : >a/b && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH' @@ -372,7 +372,7 @@ test_expect_success \ mkdir c && : >c/d && git update-index --add a c/d && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && git ls-files --stage >treeM.out && @@ -381,7 +381,7 @@ test_expect_success \ mkdir a && : >a/b && git update-index --add --remove a a/b && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH' diff --git a/t/t1002-read-tree-m-u-2way.sh b/t/t1002-read-tree-m-u-2way.sh index a847709a13..fed877b20f 100755 --- a/t/t1002-read-tree-m-u-2way.sh +++ b/t/t1002-read-tree-m-u-2way.sh @@ -21,7 +21,7 @@ compare_change () { } check_cache_at () { - clean_if_empty=`git diff-files -- "$1"` + clean_if_empty=$(git diff-files -- "$1") case "$clean_if_empty" in '') echo "$1: clean" ;; ?*) echo "$1: dirty" ;; @@ -41,14 +41,14 @@ test_expect_success \ echo bozbar >bozbar && echo rezrov >rezrov && git update-index --add nitfol bozbar rezrov && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH && echo gnusto >bozbar && git update-index --add frotz bozbar --force-remove rezrov && git ls-files --stage >M.out && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && sum bozbar frotz nitfol >M.sum && @@ -318,7 +318,7 @@ test_expect_success \ 'rm -f .git/index && echo DF >DF && git update-index --add DF && - treeDF=`git write-tree` && + treeDF=$(git write-tree) && echo treeDF $treeDF && git ls-tree $treeDF && @@ -326,7 +326,7 @@ test_expect_success \ mkdir DF && echo DF/DF >DF/DF && git update-index --add --remove DF DF/DF && - treeDFDF=`git write-tree` && + treeDFDF=$(git write-tree) && echo treeDFDF $treeDFDF && git ls-tree $treeDFDF && git ls-files --stage >DFDF.out' diff --git a/t/t1003-read-tree-prefix.sh b/t/t1003-read-tree-prefix.sh index 8c6d67edda..b6111cd150 100755 --- a/t/t1003-read-tree-prefix.sh +++ b/t/t1003-read-tree-prefix.sh @@ -11,7 +11,7 @@ test_description='git read-tree --prefix test. test_expect_success setup ' echo hello >one && git update-index --add one && - tree=`git write-tree` && + tree=$(git write-tree) && echo tree is $tree ' diff --git a/t/t1004-read-tree-m-u-wf.sh b/t/t1004-read-tree-m-u-wf.sh index 3e72aff470..c70cf42300 100755 --- a/t/t1004-read-tree-m-u-wf.sh +++ b/t/t1004-read-tree-m-u-wf.sh @@ -30,7 +30,7 @@ test_expect_success 'two-way not clobbering' ' echo >file2 master creates untracked file2 && echo >subdir/file2 master creates untracked subdir/file2 && - if err=`read_tree_u_must_succeed -m -u master side 2>&1` + if err=$(read_tree_u_must_succeed -m -u master side 2>&1) then echo should have complained false @@ -43,7 +43,7 @@ echo file2 >.gitignore test_expect_success 'two-way with incorrect --exclude-per-directory (1)' ' - if err=`read_tree_u_must_succeed -m --exclude-per-directory=.gitignore master side 2>&1` + if err=$(read_tree_u_must_succeed -m --exclude-per-directory=.gitignore master side 2>&1) then echo should have complained false @@ -54,7 +54,7 @@ test_expect_success 'two-way with incorrect --exclude-per-directory (1)' ' test_expect_success 'two-way with incorrect --exclude-per-directory (2)' ' - if err=`read_tree_u_must_succeed -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore master side 2>&1` + if err=$(read_tree_u_must_succeed -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore master side 2>&1) then echo should have complained false @@ -95,7 +95,7 @@ test_expect_success 'three-way not clobbering a working tree file' ' git checkout master && echo >file3 file three created in master, untracked && echo >subdir/file3 file three created in master, untracked && - if err=`read_tree_u_must_succeed -m -u branch-point master side 2>&1` + if err=$(read_tree_u_must_succeed -m -u branch-point master side 2>&1) then echo should have complained false diff --git a/t/t1013-read-tree-submodule.sh b/t/t1013-read-tree-submodule.sh new file mode 100755 index 0000000000..20526aed34 --- /dev/null +++ b/t/t1013-read-tree-submodule.sh @@ -0,0 +1,12 @@ +#!/bin/sh + +test_description='read-tree can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +test_submodule_switch "git read-tree -u -m" + +test_submodule_forced_switch "git read-tree -u --reset" + +test_done diff --git a/t/t1020-subdirectory.sh b/t/t1020-subdirectory.sh index 6902320e81..2edb4f2de5 100755 --- a/t/t1020-subdirectory.sh +++ b/t/t1020-subdirectory.sh @@ -20,27 +20,27 @@ test_expect_success setup ' test_expect_success 'update-index and ls-files' ' git update-index --add one && - case "`git ls-files`" in + case "$(git ls-files)" in one) echo pass one ;; *) echo bad one; exit 1 ;; esac && ( cd dir && git update-index --add two && - case "`git ls-files`" in + case "$(git ls-files)" in two) echo pass two ;; *) echo bad two; exit 1 ;; esac ) && - case "`git ls-files`" in + case "$(git ls-files)" in dir/two"$LF"one) echo pass both ;; *) echo bad; exit 1 ;; esac ' test_expect_success 'cat-file' ' - two=`git ls-files -s dir/two` && - two=`expr "$two" : "[0-7]* \\([0-9a-f]*\\)"` && + two=$(git ls-files -s dir/two) && + two=$(expr "$two" : "[0-7]* \\([0-9a-f]*\\)") && echo "$two" && git cat-file -p "$two" >actual && cmp dir/two actual && @@ -55,18 +55,18 @@ rm -f actual dir/actual test_expect_success 'diff-files' ' echo a >>one && echo d >>dir/two && - case "`git diff-files --name-only`" in + case "$(git diff-files --name-only)" in dir/two"$LF"one) echo pass top ;; *) echo bad top; exit 1 ;; esac && # diff should not omit leading paths ( cd dir && - case "`git diff-files --name-only`" in + case "$(git diff-files --name-only)" in dir/two"$LF"one) echo pass subdir ;; *) echo bad subdir; exit 1 ;; esac && - case "`git diff-files --name-only .`" in + case "$(git diff-files --name-only .)" in dir/two) echo pass subdir limited ;; *) echo bad subdir limited; exit 1 ;; esac @@ -74,11 +74,11 @@ test_expect_success 'diff-files' ' ' test_expect_success 'write-tree' ' - top=`git write-tree` && + top=$(git write-tree) && echo $top && ( cd dir && - sub=`git write-tree` && + sub=$(git write-tree) && echo $sub && test "z$top" = "z$sub" ) @@ -96,7 +96,7 @@ test_expect_success 'checkout-index' ' test_expect_success 'read-tree' ' rm -f one dir/two && - tree=`git write-tree` && + tree=$(git write-tree) && read_tree_u_must_succeed --reset -u "$tree" && cmp one original.one && cmp dir/two original.two && @@ -118,7 +118,7 @@ test_expect_success 'alias expansion' ' ) ' -test_expect_success NOT_MINGW '!alias expansion' ' +test_expect_success !MINGW '!alias expansion' ' pwd >expect && ( git config alias.test-alias-directory !pwd && diff --git a/t/t1050-large.sh b/t/t1050-large.sh index fd10528009..f9f3d1391f 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -9,11 +9,11 @@ test_expect_success setup ' # clone does not allow us to pass core.bigfilethreshold to # new repos, so set core.bigfilethreshold globally git config --global core.bigfilethreshold 200k && - echo X | dd of=large1 bs=1k seek=2000 && - echo X | dd of=large2 bs=1k seek=2000 && - echo X | dd of=large3 bs=1k seek=2000 && - echo Y | dd of=huge bs=1k seek=2500 && - GIT_ALLOC_LIMIT=1500 && + printf "%2000000s" X >large1 && + cp large1 large2 && + cp large1 large3 && + printf "%2500000s" Y >huge && + GIT_ALLOC_LIMIT=1500k && export GIT_ALLOC_LIMIT ' @@ -61,7 +61,7 @@ test_expect_success 'checkout a large file' ' large1=$(git rev-parse :large1) && git update-index --add --cacheinfo 100644 $large1 another && git checkout another && - cmp large1 another ;# this must not be test_cmp + test_cmp large1 another ' test_expect_success 'packsize limit' ' @@ -112,6 +112,20 @@ test_expect_success 'diff --raw' ' git diff --raw HEAD^ ' +test_expect_success 'diff --stat' ' + git diff --stat HEAD^ HEAD +' + +test_expect_success 'diff' ' + git diff HEAD^ HEAD >actual && + grep "Binary files.*differ" actual +' + +test_expect_success 'diff --cached' ' + git diff --cached HEAD^ >actual && + grep "Binary files.*differ" actual +' + test_expect_success 'hash-object' ' git hash-object large1 ' @@ -131,7 +145,7 @@ test_expect_success 'git-show a large file' ' ' test_expect_success 'index-pack' ' - git clone file://"`pwd`"/.git foo && + git clone file://"$(pwd)"/.git foo && GIT_DIR=non-existent git index-pack --strict --verify foo/.git/objects/pack/*.pack ' @@ -140,7 +154,7 @@ test_expect_success 'repack' ' ' test_expect_success 'pack-objects with large loose object' ' - SHA1=`git hash-object huge` && + SHA1=$(git hash-object huge) && test_create_repo loose && echo $SHA1 | git pack-objects --stdout | GIT_ALLOC_LIMIT=0 GIT_DIR=loose/.git git unpack-objects && @@ -148,7 +162,7 @@ test_expect_success 'pack-objects with large loose object' ' test_create_repo packed && mv pack-* packed/.git/objects/pack && GIT_DIR=packed/.git git cat-file blob $SHA1 >actual && - cmp huge actual + test_cmp huge actual ' test_expect_success 'tar achiving' ' @@ -163,4 +177,10 @@ test_expect_success 'zip achiving, deflate' ' git archive --format=zip HEAD >/dev/null ' +test_expect_success 'fsck' ' + test_must_fail git fsck 2>err && + n=$(grep "error: attempting to allocate .* over limit" err | wc -l) && + test "$n" -gt 1 +' + test_done diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 58cd5435be..938fc8bfd7 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -824,14 +824,14 @@ cat >expect <<\EOF trailingtilde = foo~ EOF -test_expect_success NOT_MINGW 'set --path' ' +test_expect_success !MINGW 'set --path' ' rm -f .git/config && git config --path path.home "~/" && git config --path path.normal "/dev/null" && git config --path path.trailingtilde "foo~" && test_cmp expect .git/config' -if test_have_prereq NOT_MINGW && test "${HOME+set}" +if test_have_prereq !MINGW && test "${HOME+set}" then test_set_prereq HOMEVAR fi @@ -854,7 +854,7 @@ cat >expect <<\EOF foo~ EOF -test_expect_success NOT_MINGW 'get --path copes with unset $HOME' ' +test_expect_success !MINGW 'get --path copes with unset $HOME' ' ( unset HOME; test_must_fail git config --get --path path.home \ @@ -1010,6 +1010,17 @@ test_expect_success 'git -c "key=value" support' ' test_must_fail git -c name=value config core.name ' +# We just need a type-specifier here that cares about the +# distinction internally between a NULL boolean and a real +# string (because most of git's internal parsers do care). +# Using "--path" works, but we do not otherwise care about +# its semantics. +test_expect_success 'git -c can represent empty string' ' + echo >expect && + git -c foo.empty= config --path foo.empty >actual && + test_cmp expect actual +' + test_expect_success 'key sanity-checking' ' test_must_fail git config foo=bar && test_must_fail git config foo=.bar && @@ -1158,4 +1169,14 @@ test_expect_failure 'adding a key into an empty section reuses header' ' test_cmp expect .git/config ' +test_expect_success POSIXPERM,PERL 'preserves existing permissions' ' + chmod 0600 .git/config && + git config imap.pass Hunter2 && + perl -e \ + "die q(badset) if ((stat(q(.git/config)))[2] & 07777) != 0600" && + git config --rename-section imap pop && + perl -e \ + "die q(badrename) if ((stat(q(.git/config)))[2] & 07777) != 0600" +' + test_done diff --git a/t/t1301-shared-repo.sh b/t/t1301-shared-repo.sh index de42d21c92..7eecfb836a 100755 --- a/t/t1301-shared-repo.sh +++ b/t/t1301-shared-repo.sh @@ -111,7 +111,18 @@ do done +test_expect_success POSIXPERM 'info/refs respects umask in unshared repo' ' + rm -f .git/info/refs && + test_unconfig core.sharedrepository && + umask 002 && + git update-server-info && + echo "-rw-rw-r--" >expect && + modebits .git/info/refs >actual && + test_cmp expect actual +' + test_expect_success POSIXPERM 'git reflog expire honors core.sharedRepository' ' + umask 077 && git config core.sharedRepository group && git reflog expire --all && actual="$(ls -l .git/logs/refs/heads/master)" && diff --git a/t/t1303-wacky-config.sh b/t/t1303-wacky-config.sh index 3a2c81968c..3b92083e19 100755 --- a/t/t1303-wacky-config.sh +++ b/t/t1303-wacky-config.sh @@ -111,4 +111,24 @@ test_expect_success 'unset many entries' ' test_must_fail git config section.key ' +test_expect_success '--add appends new value after existing empty value' ' + cat >expect <<-\EOF && + + + fool + roll + EOF + cp .git/config .git/config.old && + test_when_finished "mv .git/config.old .git/config" && + cat >.git/config <<-\EOF && + [foo] + baz + baz = + baz = fool + EOF + git config --add foo.baz roll && + git config --get-all foo.baz >output && + test_cmp expect output +' + test_done diff --git a/t/t1304-default-acl.sh b/t/t1304-default-acl.sh index 79045abb51..f5422f1d33 100755 --- a/t/t1304-default-acl.sh +++ b/t/t1304-default-acl.sh @@ -26,7 +26,7 @@ test_expect_success 'checking for a working acl setup' ' if test -z "$LOGNAME" then - LOGNAME=$USER + LOGNAME="${USER:-$(id -u -n)}" fi check_perms_and_acl () { diff --git a/t/t1308-config-set.sh b/t/t1308-config-set.sh new file mode 100755 index 0000000000..91235b76ba --- /dev/null +++ b/t/t1308-config-set.sh @@ -0,0 +1,221 @@ +#!/bin/sh + +test_description='Test git config-set API in different settings' + +. ./test-lib.sh + +# 'check_config get_* section.key value' verifies that the entry for +# section.key is 'value' +check_config () { + if test "$1" = expect_code + then + expect_code="$2" && shift && shift + else + expect_code=0 + fi && + op=$1 key=$2 && shift && shift && + if test $# != 0 + then + printf "%s\n" "$@" + fi >expect && + test_expect_code $expect_code test-config "$op" "$key" >actual && + test_cmp expect actual +} + +test_expect_success 'setup default config' ' + cat >.git/config <<-\EOF + [case] + penguin = very blue + Movie = BadPhysics + UPPERCASE = true + MixedCase = true + my = + foo + baz = sam + [Cores] + WhatEver = Second + baz = bar + [cores] + baz = bat + [CORES] + baz = ball + [my "Foo bAr"] + hi = mixed-case + [my "FOO BAR"] + hi = upper-case + [my "foo bar"] + hi = lower-case + [case] + baz = bat + baz = hask + [lamb] + chop = 65 + head = none + [goat] + legs = 4 + head = true + skin = false + nose = 1 + horns + EOF +' + +test_expect_success 'get value for a simple key' ' + check_config get_value case.penguin "very blue" +' + +test_expect_success 'get value for a key with value as an empty string' ' + check_config get_value case.my "" +' + +test_expect_success 'get value for a key with value as NULL' ' + check_config get_value case.foo "(NULL)" +' + +test_expect_success 'upper case key' ' + check_config get_value case.UPPERCASE "true" && + check_config get_value case.uppercase "true" +' + +test_expect_success 'mixed case key' ' + check_config get_value case.MixedCase "true" && + check_config get_value case.MIXEDCASE "true" && + check_config get_value case.mixedcase "true" +' + +test_expect_success 'key and value with mixed case' ' + check_config get_value case.Movie "BadPhysics" +' + +test_expect_success 'key with case sensitive subsection' ' + check_config get_value "my.Foo bAr.hi" "mixed-case" && + check_config get_value "my.FOO BAR.hi" "upper-case" && + check_config get_value "my.foo bar.hi" "lower-case" +' + +test_expect_success 'key with case insensitive section header' ' + check_config get_value cores.baz "ball" && + check_config get_value Cores.baz "ball" && + check_config get_value CORES.baz "ball" && + check_config get_value coreS.baz "ball" +' + +test_expect_success 'key with case insensitive section header & variable' ' + check_config get_value CORES.BAZ "ball" && + check_config get_value cores.baz "ball" && + check_config get_value cores.BaZ "ball" && + check_config get_value cOreS.bAz "ball" +' + +test_expect_success 'find value with misspelled key' ' + check_config expect_code 1 get_value "my.fOo Bar.hi" "Value not found for \"my.fOo Bar.hi\"" +' + +test_expect_success 'find value with the highest priority' ' + check_config get_value case.baz "hask" +' + +test_expect_success 'find integer value for a key' ' + check_config get_int lamb.chop 65 +' + +test_expect_success 'find string value for a key' ' + check_config get_string case.baz hask && + check_config expect_code 1 get_string case.ba "Value not found for \"case.ba\"" +' + +test_expect_success 'check line error when NULL string is queried' ' + test_expect_code 128 test-config get_string case.foo 2>result && + test_i18ngrep "fatal: .*case\.foo.*\.git/config.*line 7" result +' + +test_expect_success 'find integer if value is non parse-able' ' + check_config expect_code 128 get_int lamb.head +' + +test_expect_success 'find bool value for the entered key' ' + check_config get_bool goat.head 1 && + check_config get_bool goat.skin 0 && + check_config get_bool goat.nose 1 && + check_config get_bool goat.horns 1 && + check_config get_bool goat.legs 1 +' + +test_expect_success 'find multiple values' ' + check_config get_value_multi case.baz sam bat hask +' + +test_expect_success 'find value from a configset' ' + cat >config2 <<-\EOF && + [case] + baz = lama + [my] + new = silk + [case] + baz = ball + EOF + echo silk >expect && + test-config configset_get_value my.new config2 .git/config >actual && + test_cmp expect actual +' + +test_expect_success 'find value with highest priority from a configset' ' + echo hask >expect && + test-config configset_get_value case.baz config2 .git/config >actual && + test_cmp expect actual +' + +test_expect_success 'find value_list for a key from a configset' ' + cat >except <<-\EOF && + sam + bat + hask + lama + ball + EOF + test-config configset_get_value case.baz config2 .git/config >actual && + test_cmp expect actual +' + +test_expect_success 'proper error on non-existent files' ' + echo "Error (-1) reading configuration file non-existent-file." >expect && + test_expect_code 2 test-config configset_get_value foo.bar non-existent-file 2>actual && + test_cmp expect actual +' + +test_expect_success POSIXPERM,SANITY 'proper error on non-accessible files' ' + chmod -r .git/config && + test_when_finished "chmod +r .git/config" && + echo "Error (-1) reading configuration file .git/config." >expect && + test_expect_code 2 test-config configset_get_value foo.bar .git/config 2>actual && + test_cmp expect actual +' + +test_expect_success 'proper error on error in default config files' ' + cp .git/config .git/config.old && + test_when_finished "mv .git/config.old .git/config" && + echo "[" >>.git/config && + echo "fatal: bad config file line 34 in .git/config" >expect && + test_expect_code 128 test-config get_value foo.bar 2>actual && + test_cmp expect actual +' + +test_expect_success 'proper error on error in custom config files' ' + echo "[" >>syntax-error && + echo "fatal: bad config file line 1 in syntax-error" >expect && + test_expect_code 128 test-config configset_get_value foo.bar syntax-error 2>actual && + test_cmp expect actual +' + +test_expect_success 'check line errors for malformed values' ' + mv .git/config .git/config.old && + test_when_finished "mv .git/config.old .git/config" && + cat >.git/config <<-\EOF && + [alias] + br + EOF + test_expect_code 128 git br 2>result && + test_i18ngrep "fatal: .*alias\.br.*\.git/config.*line 2" result +' + +test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index e130c528fe..6805b9e6bb 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -110,6 +110,32 @@ test_expect_success "delete symref without dereference when the referred ref is cp -f .git/HEAD.orig .git/HEAD git update-ref -d $m +test_expect_success 'update-ref -d is not confused by self-reference' ' + git symbolic-ref refs/heads/self refs/heads/self && + test_when_finished "rm -f .git/refs/heads/self" && + test_path_is_file .git/refs/heads/self && + test_must_fail git update-ref -d refs/heads/self && + test_path_is_file .git/refs/heads/self +' + +test_expect_success 'update-ref --no-deref -d can delete self-reference' ' + git symbolic-ref refs/heads/self refs/heads/self && + test_when_finished "rm -f .git/refs/heads/self" && + test_path_is_file .git/refs/heads/self && + git update-ref --no-deref -d refs/heads/self && + test_path_is_missing .git/refs/heads/self +' + +test_expect_success 'update-ref --no-deref -d can delete reference to bad ref' ' + >.git/refs/heads/bad && + test_when_finished "rm -f .git/refs/heads/bad" && + git symbolic-ref refs/heads/ref-to-bad refs/heads/bad && + test_when_finished "rm -f .git/refs/heads/ref-to-bad" && + test_path_is_file .git/refs/heads/ref-to-bad && + git update-ref --no-deref -d refs/heads/ref-to-bad && + test_path_is_missing .git/refs/heads/ref-to-bad +' + test_expect_success '(not) create HEAD with old sha1' " test_must_fail git update-ref HEAD $A $B " @@ -235,7 +261,7 @@ test_expect_success \ 'rm -f o e && git rev-parse --verify "master@{2005-05-26 23:33:01}" >o 2>e && test '"$B"' = $(cat o) && - test "warning: Log .git/logs/'"$m has gap after $gd"'." = "$(cat e)"' + test "warning: Log for ref '"$m has gap after $gd"'." = "$(cat e)"' test_expect_success \ 'Query "master@{2005-05-26 23:38:00}" (middle of history)' \ 'rm -f o e && @@ -253,7 +279,7 @@ test_expect_success \ 'rm -f o e && git rev-parse --verify "master@{2005-05-28}" >o 2>e && test '"$D"' = $(cat o) && - test "warning: Log .git/logs/'"$m unexpectedly ended on $ld"'." = "$(cat e)"' + test "warning: Log for ref '"$m unexpectedly ended on $ld"'." = "$(cat e)"' rm -f .git/$m .git/logs/$m expect @@ -350,88 +376,76 @@ test_expect_success 'stdin fails on unknown command' ' grep "fatal: unknown command: unknown $a" err ' -test_expect_success 'stdin fails on badly quoted input' ' +test_expect_success 'stdin fails on unbalanced quotes' ' echo "create $a \"master" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && grep "fatal: badly quoted argument: \\\"master" err ' -test_expect_success 'stdin fails on arguments not separated by space' ' - echo "create \"$a\"master" >stdin && +test_expect_success 'stdin fails on invalid escape' ' + echo "create $a \"ma\zter\"" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: expected SP but got: master" err + grep "fatal: badly quoted argument: \\\"ma\\\\zter\\\"" err ' -test_expect_success 'stdin fails create with no ref' ' - echo "create " >stdin && +test_expect_success 'stdin fails on junk after quoted argument' ' + echo "create \"$a\"master" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create line missing <ref>" err + grep "fatal: unexpected character after quoted argument: \\\"$a\\\"master" err ' -test_expect_success 'stdin fails create with bad ref name' ' - echo "create ~a $m" >stdin && +test_expect_success 'stdin fails create with no ref' ' + echo "create " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: invalid ref format: ~a" err + grep "fatal: create: missing <ref>" err ' test_expect_success 'stdin fails create with no new value' ' echo "create $a" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create $a missing <newvalue>" err + grep "fatal: create $a: missing <newvalue>" err ' test_expect_success 'stdin fails create with too many arguments' ' echo "create $a $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create $a has extra input: $m" err + grep "fatal: create $a: extra input: $m" err ' test_expect_success 'stdin fails update with no ref' ' echo "update " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: update line missing <ref>" err -' - -test_expect_success 'stdin fails update with bad ref name' ' - echo "update ~a $m" >stdin && - test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: invalid ref format: ~a" err + grep "fatal: update: missing <ref>" err ' test_expect_success 'stdin fails update with no new value' ' echo "update $a" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: update $a missing <newvalue>" err + grep "fatal: update $a: missing <newvalue>" err ' test_expect_success 'stdin fails update with too many arguments' ' echo "update $a $m $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: update $a has extra input: $m" err + grep "fatal: update $a: extra input: $m" err ' test_expect_success 'stdin fails delete with no ref' ' echo "delete " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: delete line missing <ref>" err -' - -test_expect_success 'stdin fails delete with bad ref name' ' - echo "delete ~a $m" >stdin && - test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: invalid ref format: ~a" err + grep "fatal: delete: missing <ref>" err ' test_expect_success 'stdin fails delete with too many arguments' ' echo "delete $a $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: delete $a has extra input: $m" err + grep "fatal: delete $a: extra input: $m" err ' test_expect_success 'stdin fails verify with too many arguments' ' echo "verify $a $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: verify $a has extra input: $m" err + grep "fatal: verify $a: extra input: $m" err ' test_expect_success 'stdin fails option with unknown name' ' @@ -458,6 +472,24 @@ test_expect_success 'stdin create ref works' ' test_cmp expect actual ' +test_expect_success 'stdin succeeds with quoted argument' ' + git update-ref -d $a && + echo "create $a \"$m\"" >stdin && + git update-ref --stdin <stdin && + git rev-parse $m >expect && + git rev-parse $a >actual && + test_cmp expect actual +' + +test_expect_success 'stdin succeeds with escaped character' ' + git update-ref -d $a && + echo "create $a \"ma\\163ter\"" >stdin && + git update-ref --stdin <stdin && + git rev-parse $m >expect && + git rev-parse $a >actual && + test_cmp expect actual +' + test_expect_success 'stdin update ref creates with zero old value' ' echo "update $b $m $Z" >stdin && git update-ref --stdin <stdin && @@ -494,21 +526,21 @@ test_expect_success 'stdin update ref fails with wrong old value' ' test_expect_success 'stdin update ref fails with bad old value' ' echo "update $c $m does-not-exist" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: invalid old value for ref $c: does-not-exist" err && + grep "fatal: update $c: invalid <oldvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' test_expect_success 'stdin create ref fails with bad new value' ' echo "create $c does-not-exist" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: invalid new value for ref $c: does-not-exist" err && + grep "fatal: create $c: invalid <newvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' test_expect_success 'stdin create ref fails with zero new value' ' echo "create $c " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create $c given zero new value" err && + grep "fatal: create $c: zero <newvalue>" err && test_must_fail git rev-parse --verify -q $c ' @@ -532,7 +564,7 @@ test_expect_success 'stdin delete ref fails with wrong old value' ' test_expect_success 'stdin delete ref fails with zero old value' ' echo "delete $a " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: delete $a given zero old value" err && + grep "fatal: delete $a: zero <oldvalue>" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual @@ -587,6 +619,52 @@ test_expect_success 'stdin update/create/verify combination works' ' test_must_fail git rev-parse --verify -q $c ' +test_expect_success 'stdin verify succeeds for correct value' ' + git rev-parse $m >expect && + echo "verify $m $m" >stdin && + git update-ref --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin verify succeeds for missing reference' ' + echo "verify refs/heads/missing $Z" >stdin && + git update-ref --stdin <stdin && + test_must_fail git rev-parse --verify -q refs/heads/missing +' + +test_expect_success 'stdin verify treats no value as missing' ' + echo "verify refs/heads/missing" >stdin && + git update-ref --stdin <stdin && + test_must_fail git rev-parse --verify -q refs/heads/missing +' + +test_expect_success 'stdin verify fails for wrong value' ' + git rev-parse $m >expect && + echo "verify $m $m~1" >stdin && + test_must_fail git update-ref --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin verify fails for mistaken null value' ' + git rev-parse $m >expect && + echo "verify $m $Z" >stdin && + test_must_fail git update-ref --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin verify fails for mistaken empty value' ' + M=$(git rev-parse $m) && + test_when_finished "git update-ref $m $M" && + git rev-parse $m >expect && + echo "verify $m" >stdin && + test_must_fail git update-ref --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + test_expect_success 'stdin update refs works with identity updates' ' cat >stdin <<-EOF && update $a $m $m @@ -673,19 +751,13 @@ test_expect_success 'stdin -z fails on unknown command' ' test_expect_success 'stdin -z fails create with no ref' ' printf $F "create " >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: create line missing <ref>" err -' - -test_expect_success 'stdin -z fails create with bad ref name' ' - printf $F "create ~a " "$m" >stdin && - test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: invalid ref format: ~a " err + grep "fatal: create: missing <ref>" err ' test_expect_success 'stdin -z fails create with no new value' ' printf $F "create $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: create $a missing <newvalue>" err + grep "fatal: create $a: unexpected end of input when reading <newvalue>" err ' test_expect_success 'stdin -z fails create with too many arguments' ' @@ -697,25 +769,33 @@ test_expect_success 'stdin -z fails create with too many arguments' ' test_expect_success 'stdin -z fails update with no ref' ' printf $F "update " >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: update line missing <ref>" err + grep "fatal: update: missing <ref>" err ' -test_expect_success 'stdin -z fails update with bad ref name' ' - printf $F "update ~a" "$m" >stdin && +test_expect_success 'stdin -z fails update with too few args' ' + printf $F "update $a" "$m" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: invalid ref format: ~a" err + grep "fatal: update $a: unexpected end of input when reading <oldvalue>" err +' + +test_expect_success 'stdin -z emits warning with empty new value' ' + git update-ref $a $m && + printf $F "update $a" "" "" >stdin && + git update-ref -z --stdin <stdin 2>err && + grep "warning: update $a: missing <newvalue>, treating as zero" err && + test_must_fail git rev-parse --verify -q $a ' test_expect_success 'stdin -z fails update with no new value' ' printf $F "update $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: update $a missing <newvalue>" err + grep "fatal: update $a: unexpected end of input when reading <newvalue>" err ' test_expect_success 'stdin -z fails update with no old value' ' printf $F "update $a" "$m" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: update $a missing \\[<oldvalue>\\] NUL" err + grep "fatal: update $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails update with too many arguments' ' @@ -727,19 +807,13 @@ test_expect_success 'stdin -z fails update with too many arguments' ' test_expect_success 'stdin -z fails delete with no ref' ' printf $F "delete " >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: delete line missing <ref>" err -' - -test_expect_success 'stdin -z fails delete with bad ref name' ' - printf $F "delete ~a" "$m" >stdin && - test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: invalid ref format: ~a" err + grep "fatal: delete: missing <ref>" err ' test_expect_success 'stdin -z fails delete with no old value' ' printf $F "delete $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: delete $a missing \\[<oldvalue>\\] NUL" err + grep "fatal: delete $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails delete with too many arguments' ' @@ -757,7 +831,7 @@ test_expect_success 'stdin -z fails verify with too many arguments' ' test_expect_success 'stdin -z fails verify with no old value' ' printf $F "verify $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: verify $a missing \\[<oldvalue>\\] NUL" err + grep "fatal: verify $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails option with unknown name' ' @@ -816,7 +890,7 @@ test_expect_success 'stdin -z update ref fails with wrong old value' ' test_expect_success 'stdin -z update ref fails with bad old value' ' printf $F "update $c" "$m" "does-not-exist" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: invalid old value for ref $c: does-not-exist" err && + grep "fatal: update $c: invalid <oldvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' @@ -834,14 +908,14 @@ test_expect_success 'stdin -z create ref fails with bad new value' ' git update-ref -d "$c" && printf $F "create $c" "does-not-exist" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: invalid new value for ref $c: does-not-exist" err && + grep "fatal: create $c: invalid <newvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' -test_expect_success 'stdin -z create ref fails with zero new value' ' +test_expect_success 'stdin -z create ref fails with empty new value' ' printf $F "create $c" "" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: create $c given zero new value" err && + grep "fatal: create $c: missing <newvalue>" err && test_must_fail git rev-parse --verify -q $c ' @@ -865,7 +939,7 @@ test_expect_success 'stdin -z delete ref fails with wrong old value' ' test_expect_success 'stdin -z delete ref fails with zero old value' ' printf $F "delete $a" "$Z" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: delete $a given zero old value" err && + grep "fatal: delete $a: zero <oldvalue>" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual @@ -910,6 +984,52 @@ test_expect_success 'stdin -z update/create/verify combination works' ' test_must_fail git rev-parse --verify -q $c ' +test_expect_success 'stdin -z verify succeeds for correct value' ' + git rev-parse $m >expect && + printf $F "verify $m" "$m" >stdin && + git update-ref -z --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin -z verify succeeds for missing reference' ' + printf $F "verify refs/heads/missing" "$Z" >stdin && + git update-ref -z --stdin <stdin && + test_must_fail git rev-parse --verify -q refs/heads/missing +' + +test_expect_success 'stdin -z verify treats no value as missing' ' + printf $F "verify refs/heads/missing" "" >stdin && + git update-ref -z --stdin <stdin && + test_must_fail git rev-parse --verify -q refs/heads/missing +' + +test_expect_success 'stdin -z verify fails for wrong value' ' + git rev-parse $m >expect && + printf $F "verify $m" "$m~1" >stdin && + test_must_fail git update-ref -z --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin -z verify fails for mistaken null value' ' + git rev-parse $m >expect && + printf $F "verify $m" "$Z" >stdin && + test_must_fail git update-ref -z --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + +test_expect_success 'stdin -z verify fails for mistaken empty value' ' + M=$(git rev-parse $m) && + test_when_finished "git update-ref $m $M" && + git rev-parse $m >expect && + printf $F "verify $m" "" >stdin && + test_must_fail git update-ref -z --stdin <stdin && + git rev-parse $m >actual && + test_cmp expect actual +' + test_expect_success 'stdin -z update refs works with identity updates' ' printf $F "update $a" "$m" "$m" "update $b" "$m" "$m" "update $c" "$Z" "" >stdin && git update-ref -z --stdin <stdin && @@ -923,7 +1043,7 @@ test_expect_success 'stdin -z update refs works with identity updates' ' test_expect_success 'stdin -z update refs fails with wrong old value' ' git update-ref $c $m && - printf $F "update $a" "$m" "$m" "update $b" "$m" "$m" "update $c" "" "$Z" >stdin && + printf $F "update $a" "$m" "$m" "update $b" "$m" "$m" "update $c" "$m" "$Z" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && grep "fatal: Cannot lock the ref '"'"'$c'"'"'" err && git rev-parse $m >expect && diff --git a/t/t1402-check-ref-format.sh b/t/t1402-check-ref-format.sh index 1a5a5f39fd..e5dc62e9ef 100755 --- a/t/t1402-check-ref-format.sh +++ b/t/t1402-check-ref-format.sh @@ -7,7 +7,7 @@ test_description='Test git check-ref-format' valid_ref() { prereq= case $1 in - [A-Z]*) + [A-Z!]*) prereq=$1 shift esac @@ -19,7 +19,7 @@ valid_ref() { invalid_ref() { prereq= case $1 in - [A-Z]*) + [A-Z!]*) prereq=$1 shift esac @@ -30,17 +30,17 @@ invalid_ref() { } invalid_ref '' -invalid_ref NOT_MINGW '/' -invalid_ref NOT_MINGW '/' --allow-onelevel -invalid_ref NOT_MINGW '/' --normalize -invalid_ref NOT_MINGW '/' '--allow-onelevel --normalize' +invalid_ref !MINGW '/' +invalid_ref !MINGW '/' --allow-onelevel +invalid_ref !MINGW '/' --normalize +invalid_ref !MINGW '/' '--allow-onelevel --normalize' valid_ref 'foo/bar/baz' valid_ref 'foo/bar/baz' --normalize invalid_ref 'refs///heads/foo' valid_ref 'refs///heads/foo' --normalize invalid_ref 'heads/foo/' -invalid_ref NOT_MINGW '/heads/foo' -valid_ref NOT_MINGW '/heads/foo' --normalize +invalid_ref !MINGW '/heads/foo' +valid_ref !MINGW '/heads/foo' --normalize invalid_ref '///heads/foo' valid_ref '///heads/foo' --normalize invalid_ref './foo' @@ -48,6 +48,7 @@ invalid_ref './foo/bar' invalid_ref 'foo/./bar' invalid_ref 'foo/bar/.' invalid_ref '.refs/foo' +invalid_ref 'refs/heads/foo.' invalid_ref 'heads/foo..bar' invalid_ref 'heads/foo?bar' valid_ref 'foo./bar' @@ -119,14 +120,14 @@ invalid_ref "$ref" --refspec-pattern invalid_ref "$ref" '--refspec-pattern --allow-onelevel' ref='/foo' -invalid_ref NOT_MINGW "$ref" -invalid_ref NOT_MINGW "$ref" --allow-onelevel -invalid_ref NOT_MINGW "$ref" --refspec-pattern -invalid_ref NOT_MINGW "$ref" '--refspec-pattern --allow-onelevel' -invalid_ref NOT_MINGW "$ref" --normalize -valid_ref NOT_MINGW "$ref" '--allow-onelevel --normalize' -invalid_ref NOT_MINGW "$ref" '--refspec-pattern --normalize' -valid_ref NOT_MINGW "$ref" '--refspec-pattern --allow-onelevel --normalize' +invalid_ref !MINGW "$ref" +invalid_ref !MINGW "$ref" --allow-onelevel +invalid_ref !MINGW "$ref" --refspec-pattern +invalid_ref !MINGW "$ref" '--refspec-pattern --allow-onelevel' +invalid_ref !MINGW "$ref" --normalize +valid_ref !MINGW "$ref" '--allow-onelevel --normalize' +invalid_ref !MINGW "$ref" '--refspec-pattern --normalize' +valid_ref !MINGW "$ref" '--refspec-pattern --allow-onelevel --normalize' test_expect_success "check-ref-format --branch @{-1}" ' T=$(git write-tree) && @@ -161,7 +162,7 @@ test_expect_success 'check-ref-format --branch from subdir' ' valid_ref_normalized() { prereq= case $1 in - [A-Z]*) + [A-Z!]*) prereq=$1 shift esac @@ -173,7 +174,7 @@ valid_ref_normalized() { invalid_ref_normalized() { prereq= case $1 in - [A-Z]*) + [A-Z!]*) prereq=$1 shift esac @@ -184,10 +185,10 @@ invalid_ref_normalized() { valid_ref_normalized 'heads/foo' 'heads/foo' valid_ref_normalized 'refs///heads/foo' 'refs/heads/foo' -valid_ref_normalized NOT_MINGW '/heads/foo' 'heads/foo' +valid_ref_normalized !MINGW '/heads/foo' 'heads/foo' valid_ref_normalized '///heads/foo' 'heads/foo' invalid_ref_normalized 'foo' -invalid_ref_normalized NOT_MINGW '/foo' +invalid_ref_normalized !MINGW '/foo' invalid_ref_normalized 'heads/foo/../bar' invalid_ref_normalized 'heads/./foo' invalid_ref_normalized 'heads\foo' diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 236b13a3ab..779d4e3829 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -245,4 +245,76 @@ test_expect_success 'gc.reflogexpire=false' ' ' +test_expect_success 'checkout should not delete log for packed ref' ' + test $(git reflog master | wc -l) = 4 && + git branch foo && + git pack-refs --all && + git checkout foo && + test $(git reflog master | wc -l) = 4 +' + +test_expect_success 'stale dirs do not cause d/f conflicts (reflogs on)' ' + test_when_finished "git branch -d one || git branch -d one/two" && + + git branch one/two master && + echo "one/two@{0} branch: Created from master" >expect && + git log -g --format="%gd %gs" one/two >actual && + test_cmp expect actual && + git branch -d one/two && + + # now logs/refs/heads/one is a stale directory, but + # we should move it out of the way to create "one" reflog + git branch one master && + echo "one@{0} branch: Created from master" >expect && + git log -g --format="%gd %gs" one >actual && + test_cmp expect actual +' + +test_expect_success 'stale dirs do not cause d/f conflicts (reflogs off)' ' + test_when_finished "git branch -d one || git branch -d one/two" && + + git branch one/two master && + echo "one/two@{0} branch: Created from master" >expect && + git log -g --format="%gd %gs" one/two >actual && + test_cmp expect actual && + git branch -d one/two && + + # same as before, but we only create a reflog for "one" if + # it already exists, which it does not + git -c core.logallrefupdates=false branch one master && + : >expect && + git log -g --format="%gd %gs" one >actual && + test_cmp expect actual +' + +# Triggering the bug detected by this test requires a newline to fall +# exactly BUFSIZ-1 bytes from the end of the file. We don't know +# what that value is, since it's platform dependent. However, if +# we choose some value N, we also catch any D which divides N evenly +# (since we will read backwards in chunks of D). So we choose 8K, +# which catches glibc (with an 8K BUFSIZ) and *BSD (1K). +# +# Each line is 114 characters, so we need 75 to still have a few before the +# last 8K. The 89-character padding on the final entry lines up our +# newline exactly. +test_expect_success 'parsing reverse reflogs at BUFSIZ boundaries' ' + git checkout -b reflogskip && + z38=00000000000000000000000000000000000000 && + ident="abc <xyz> 0000000001 +0000" && + for i in $(test_seq 1 75); do + printf "$z38%02d $z38%02d %s\t" $i $(($i+1)) "$ident" && + if test $i = 75; then + for j in $(test_seq 1 89); do + printf X + done + else + printf X + fi && + printf "\n" + done >.git/logs/refs/heads/reflogskip && + git rev-parse reflogskip@{73} >actual && + echo ${z38}03 >expect && + test_cmp expect actual +' + test_done diff --git a/t/t1413-reflog-detach.sh b/t/t1413-reflog-detach.sh new file mode 100755 index 0000000000..c730600d8a --- /dev/null +++ b/t/t1413-reflog-detach.sh @@ -0,0 +1,70 @@ +#!/bin/sh + +test_description='Test reflog interaction with detached HEAD' +. ./test-lib.sh + +reset_state () { + git checkout master && + cp saved_reflog .git/logs/HEAD +} + +test_expect_success setup ' + test_tick && + git commit --allow-empty -m initial && + git branch side && + test_tick && + git commit --allow-empty -m second && + cat .git/logs/HEAD >saved_reflog +' + +test_expect_success baseline ' + reset_state && + git rev-parse master master^ >expect && + git log -g --format=%H >actual && + test_cmp expect actual +' + +test_expect_success 'switch to branch' ' + reset_state && + git rev-parse side master master^ >expect && + git checkout side && + git log -g --format=%H >actual && + test_cmp expect actual +' + +test_expect_success 'detach to other' ' + reset_state && + git rev-parse master side master master^ >expect && + git checkout side && + git checkout master^0 && + git log -g --format=%H >actual && + test_cmp expect actual +' + +test_expect_success 'detach to self' ' + reset_state && + git rev-parse master master master^ >expect && + git checkout master^0 && + git log -g --format=%H >actual && + test_cmp expect actual +' + +test_expect_success 'attach to self' ' + reset_state && + git rev-parse master master master master^ >expect && + git checkout master^0 && + git checkout master && + git log -g --format=%H >actual && + test_cmp expect actual +' + +test_expect_success 'attach to other' ' + reset_state && + git rev-parse side master master master^ >expect && + git checkout master^0 && + git checkout side && + git log -g --format=%H >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t1430-bad-ref-name.sh b/t/t1430-bad-ref-name.sh new file mode 100755 index 0000000000..468e85621a --- /dev/null +++ b/t/t1430-bad-ref-name.sh @@ -0,0 +1,207 @@ +#!/bin/sh + +test_description='Test handling of ref names that check-ref-format rejects' +. ./test-lib.sh + +test_expect_success setup ' + test_commit one && + test_commit two +' + +test_expect_success 'fast-import: fail on invalid branch name ".badbranchname"' ' + test_when_finished "rm -f .git/objects/pack_* .git/objects/index_*" && + cat >input <<-INPUT_END && + commit .badbranchname + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + corrupt + COMMIT + + from refs/heads/master + + INPUT_END + test_must_fail git fast-import <input +' + +test_expect_success 'fast-import: fail on invalid branch name "bad[branch]name"' ' + test_when_finished "rm -f .git/objects/pack_* .git/objects/index_*" && + cat >input <<-INPUT_END && + commit bad[branch]name + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + corrupt + COMMIT + + from refs/heads/master + + INPUT_END + test_must_fail git fast-import <input +' + +test_expect_success 'git branch shows badly named ref' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + git branch >output && + grep -e "broken\.\.\.ref" output +' + +test_expect_success 'branch -d can delete badly named ref' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + git branch -d broken...ref && + git branch >output && + ! grep -e "broken\.\.\.ref" output +' + +test_expect_success 'branch -D can delete badly named ref' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + git branch -D broken...ref && + git branch >output && + ! grep -e "broken\.\.\.ref" output +' + +test_expect_success 'branch -D cannot delete non-ref in .git dir' ' + echo precious >.git/my-private-file && + echo precious >expect && + test_must_fail git branch -D ../../my-private-file && + test_cmp expect .git/my-private-file +' + +test_expect_success 'branch -D cannot delete absolute path' ' + git branch -f extra && + test_must_fail git branch -D "$(pwd)/.git/refs/heads/extra" && + test_cmp_rev HEAD extra +' + +test_expect_success 'git branch cannot create a badly named ref' ' + test_when_finished "rm -f .git/refs/heads/broken...ref" && + test_must_fail git branch broken...ref && + git branch >output && + ! grep -e "broken\.\.\.ref" output +' + +test_expect_success 'branch -m cannot rename to a bad ref name' ' + test_when_finished "rm -f .git/refs/heads/broken...ref" && + test_might_fail git branch -D goodref && + git branch goodref && + test_must_fail git branch -m goodref broken...ref && + test_cmp_rev master goodref && + git branch >output && + ! grep -e "broken\.\.\.ref" output +' + +test_expect_failure 'branch -m can rename from a bad ref name' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + git branch -m broken...ref renamed && + test_cmp_rev master renamed && + git branch >output && + ! grep -e "broken\.\.\.ref" output +' + +test_expect_success 'push cannot create a badly named ref' ' + test_when_finished "rm -f .git/refs/heads/broken...ref" && + test_must_fail git push "file://$(pwd)" HEAD:refs/heads/broken...ref && + git branch >output && + ! grep -e "broken\.\.\.ref" output +' + +test_expect_failure 'push --mirror can delete badly named ref' ' + top=$(pwd) && + git init src && + git init dest && + + ( + cd src && + test_commit one + ) && + ( + cd dest && + test_commit two && + git checkout --detach && + cp .git/refs/heads/master .git/refs/heads/broken...ref + ) && + git -C src push --mirror "file://$top/dest" && + git -C dest branch >output && + ! grep -e "broken\.\.\.ref" output +' + +test_expect_success 'rev-parse skips symref pointing to broken name' ' + test_when_finished "rm -f .git/refs/heads/broken...ref" && + git branch shadow one && + cp .git/refs/heads/master .git/refs/heads/broken...ref && + git symbolic-ref refs/tags/shadow refs/heads/broken...ref && + + git rev-parse --verify one >expect && + git rev-parse --verify shadow >actual 2>err && + test_cmp expect actual && + test_i18ngrep "ignoring.*refs/tags/shadow" err +' + +test_expect_success 'update-ref --no-deref -d can delete reference to broken name' ' + git symbolic-ref refs/heads/badname refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/badname" && + test_path_is_file .git/refs/heads/badname && + git update-ref --no-deref -d refs/heads/badname && + test_path_is_missing .git/refs/heads/badname +' + +test_expect_success 'update-ref -d can delete broken name' ' + cp .git/refs/heads/master .git/refs/heads/broken...ref && + test_when_finished "rm -f .git/refs/heads/broken...ref" && + git update-ref -d refs/heads/broken...ref && + git branch >output && + ! grep -e "broken\.\.\.ref" output +' + +test_expect_success 'update-ref -d cannot delete non-ref in .git dir' ' + echo precious >.git/my-private-file && + echo precious >expect && + test_must_fail git update-ref -d my-private-file && + test_cmp expect .git/my-private-file +' + +test_expect_success 'update-ref -d cannot delete absolute path' ' + git branch -f extra && + test_must_fail git update-ref -d "$(pwd)/.git/refs/heads/extra" && + test_cmp_rev HEAD extra +' + +test_expect_success 'update-ref --stdin fails create with bad ref name' ' + echo "create ~a refs/heads/master" >stdin && + test_must_fail git update-ref --stdin <stdin 2>err && + grep "fatal: invalid ref format: ~a" err +' + +test_expect_success 'update-ref --stdin fails update with bad ref name' ' + echo "update ~a refs/heads/master" >stdin && + test_must_fail git update-ref --stdin <stdin 2>err && + grep "fatal: invalid ref format: ~a" err +' + +test_expect_success 'update-ref --stdin fails delete with bad ref name' ' + echo "delete ~a refs/heads/master" >stdin && + test_must_fail git update-ref --stdin <stdin 2>err && + grep "fatal: invalid ref format: ~a" err +' + +test_expect_success 'update-ref --stdin -z fails create with bad ref name' ' + printf "%s\0" "create ~a " refs/heads/master >stdin && + test_must_fail git update-ref -z --stdin <stdin 2>err && + grep "fatal: invalid ref format: ~a " err +' + +test_expect_success 'update-ref --stdin -z fails update with bad ref name' ' + printf "%s\0" "update ~a" refs/heads/master "" >stdin && + test_must_fail git update-ref -z --stdin <stdin 2>err && + grep "fatal: invalid ref format: ~a" err +' + +test_expect_success 'update-ref --stdin -z fails delete with bad ref name' ' + printf "%s\0" "delete ~a" refs/heads/master >stdin && + test_must_fail git update-ref -z --stdin <stdin 2>err && + grep "fatal: invalid ref format: ~a" err +' + +test_done diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index a5589e2da7..cfb32b6242 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -69,7 +69,7 @@ test_expect_success 'object with bad sha1' ' git update-ref refs/heads/bogus $cmt && test_when_finished "git update-ref -d refs/heads/bogus" && - test_might_fail git fsck 2>out && + test_must_fail git fsck 2>out && cat out && grep "$sha.*corrupt" out ' @@ -101,7 +101,7 @@ test_expect_success 'email with embedded > is not okay' ' test_when_finished "remove_object $new" && git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && - git fsck 2>out && + test_must_fail git fsck 2>out && cat out && grep "error in commit $new" out ' @@ -113,7 +113,7 @@ test_expect_success 'missing < email delimiter is reported nicely' ' test_when_finished "remove_object $new" && git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && - git fsck 2>out && + test_must_fail git fsck 2>out && cat out && grep "error in commit $new.* - bad name" out ' @@ -125,7 +125,7 @@ test_expect_success 'missing email is reported nicely' ' test_when_finished "remove_object $new" && git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && - git fsck 2>out && + test_must_fail git fsck 2>out && cat out && grep "error in commit $new.* - missing email" out ' @@ -137,7 +137,7 @@ test_expect_success '> in name is reported' ' test_when_finished "remove_object $new" && git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && - git fsck 2>out && + test_must_fail git fsck 2>out && cat out && grep "error in commit $new" out ' @@ -151,11 +151,31 @@ test_expect_success 'integer overflow in timestamps is reported' ' test_when_finished "remove_object $new" && git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && - git fsck 2>out && + test_must_fail git fsck 2>out && cat out && grep "error in commit $new.*integer overflow" out ' +test_expect_success 'malformatted tree object' ' + test_when_finished "git update-ref -d refs/tags/wrong" && + test_when_finished "remove_object \$T" && + T=$( + GIT_INDEX_FILE=test-index && + export GIT_INDEX_FILE && + rm -f test-index && + >x && + git add x && + T=$(git write-tree) && + ( + git cat-file tree $T && + git cat-file tree $T + ) | + git hash-object -w -t tree --stdin + ) && + test_must_fail git fsck 2>out && + grep "error in tree .*contains duplicate file entries" out +' + test_expect_success 'tag pointing to nonexistent' ' cat >invalid-tag <<-\EOF && object ffffffffffffffffffffffffffffffffffffffff @@ -194,6 +214,48 @@ test_expect_success 'tag pointing to something else than its type' ' test_must_fail git fsck --tags ' +test_expect_success 'tag with incorrect tag name & missing tagger' ' + sha=$(git rev-parse HEAD) && + cat >wrong-tag <<-EOF && + object $sha + type commit + tag wrong name format + + This is an invalid tag. + EOF + + tag=$(git hash-object -t tag -w --stdin <wrong-tag) && + test_when_finished "remove_object $tag" && + echo $tag >.git/refs/tags/wrong && + test_when_finished "git update-ref -d refs/tags/wrong" && + git fsck --tags 2>out && + + cat >expect <<-EOF && + warning in tag $tag: invalid '\''tag'\'' name: wrong name format + warning in tag $tag: invalid format - expected '\''tagger'\'' line + EOF + test_cmp expect out +' + +test_expect_success 'tag with bad tagger' ' + sha=$(git rev-parse HEAD) && + cat >wrong-tag <<-EOF && + object $sha + type commit + tag not-quite-wrong + tagger Bad Tagger Name + + This is an invalid tag. + EOF + + tag=$(git hash-object --literally -t tag -w --stdin <wrong-tag) && + test_when_finished "remove_object $tag" && + echo $tag >.git/refs/tags/wrong && + test_when_finished "git update-ref -d refs/tags/wrong" && + test_must_fail git fsck --tags 2>out && + grep "error in tag .*: invalid author/committer" out +' + test_expect_success 'cleaned up' ' git fsck >actual 2>&1 && test_cmp empty actual @@ -302,4 +364,60 @@ test_expect_success 'fsck allows .Ňit' ' ) ' +# create a static test repo which is broken by omitting +# one particular object ($1, which is looked up via rev-parse +# in the new repository). +create_repo_missing () { + rm -rf missing && + git init missing && + ( + cd missing && + git commit -m one --allow-empty && + mkdir subdir && + echo content >subdir/file && + git add subdir/file && + git commit -m two && + unrelated=$(echo unrelated | git hash-object --stdin -w) && + git tag -m foo tag $unrelated && + sha1=$(git rev-parse --verify "$1") && + path=$(echo $sha1 | sed 's|..|&/|') && + rm .git/objects/$path + ) +} + +test_expect_success 'fsck notices missing blob' ' + create_repo_missing HEAD:subdir/file && + test_must_fail git -C missing fsck +' + +test_expect_success 'fsck notices missing subtree' ' + create_repo_missing HEAD:subdir && + test_must_fail git -C missing fsck +' + +test_expect_success 'fsck notices missing root tree' ' + create_repo_missing HEAD^{tree} && + test_must_fail git -C missing fsck +' + +test_expect_success 'fsck notices missing parent' ' + create_repo_missing HEAD^ && + test_must_fail git -C missing fsck +' + +test_expect_success 'fsck notices missing tagged object' ' + create_repo_missing tag^{blob} && + test_must_fail git -C missing fsck +' + +test_expect_success 'fsck notices ref pointing to missing commit' ' + create_repo_missing HEAD && + test_must_fail git -C missing fsck +' + +test_expect_success 'fsck notices ref pointing to missing tag' ' + create_repo_missing tag && + test_must_fail git -C missing fsck +' + test_done diff --git a/t/t1502-rev-parse-parseopt.sh b/t/t1502-rev-parse-parseopt.sh index 922423e7d0..ebe7c3b87c 100755 --- a/t/t1502-rev-parse-parseopt.sh +++ b/t/t1502-rev-parse-parseopt.sh @@ -19,7 +19,7 @@ sed -e 's/^|//' >expect <<\END_EXPECT | -d, --data[=...] short and long option with an optional argument | |Argument hints -| -b <arg> short option required argument +| -B <arg> short option required argument | --bar2 <arg> long option required argument | -e, --fuz <with-space> | short and long option required argument @@ -51,7 +51,7 @@ sed -e 's/^|//' >optionspec <<\EOF |d,data? short and long option with an optional argument | | Argument hints -|b=arg short option required argument +|B=arg short option required argument |bar2=arg long option required argument |e,fuz=with-space short and long option required argument |s?some short option optional argument diff --git a/t/t1503-rev-parse-verify.sh b/t/t1503-rev-parse-verify.sh index 813cc1b3e2..823fe1d799 100755 --- a/t/t1503-rev-parse-verify.sh +++ b/t/t1503-rev-parse-verify.sh @@ -72,15 +72,42 @@ test_expect_success 'fails with any bad rev or many good revs' ' test_expect_success 'fails silently when using -q' ' test_must_fail git rev-parse --verify --quiet 2>error && - test -z "$(cat error)" && + test_must_be_empty error && test_must_fail git rev-parse -q --verify foo 2>error && - test -z "$(cat error)" && + test_must_be_empty error && test_must_fail git rev-parse --verify -q HEAD bar 2>error && - test -z "$(cat error)" && + test_must_be_empty error && test_must_fail git rev-parse --quiet --verify baz HEAD 2>error && - test -z "$(cat error)" && + test_must_be_empty error && test_must_fail git rev-parse -q --verify $HASH2 HEAD 2>error && - test -z "$(cat error)" + test_must_be_empty error +' + +test_expect_success 'fails silently when using -q with deleted reflogs' ' + ref=$(git rev-parse HEAD) && + : >.git/logs/refs/test && + git update-ref -m "message for refs/test" refs/test "$ref" && + git reflog delete --updateref --rewrite refs/test@{0} && + test_must_fail git rev-parse -q --verify refs/test@{0} >error 2>&1 && + test_must_be_empty error +' + +test_expect_success 'fails silently when using -q with not enough reflogs' ' + ref=$(git rev-parse HEAD) && + : >.git/logs/refs/test2 && + git update-ref -m "message for refs/test2" refs/test2 "$ref" && + test_must_fail git rev-parse -q --verify refs/test2@{999} >error 2>&1 && + test_must_be_empty error +' + +test_expect_success 'succeeds silently with -q and reflogs that do not go far back enough in time' ' + ref=$(git rev-parse HEAD) && + : >.git/logs/refs/test3 && + git update-ref -m "message for refs/test3" refs/test3 "$ref" && + git rev-parse -q --verify refs/test3@{1.year.ago} >actual 2>error && + test_must_be_empty error && + echo "$ref" >expect && + test_cmp expect actual ' test_expect_success 'no stdout output on error' ' diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh new file mode 100755 index 0000000000..94fb473e7c --- /dev/null +++ b/t/t1700-split-index.sh @@ -0,0 +1,194 @@ +#!/bin/sh + +test_description='split index mode tests' + +. ./test-lib.sh + +# We need total control of index splitting here +sane_unset GIT_TEST_SPLIT_INDEX + +test_expect_success 'enable split index' ' + git update-index --split-index && + test-dump-split-index .git/index >actual && + cat >expect <<EOF && +own 8299b0bcd1ac364e5f1d7768efb62fa2da79a339 +base 39d890139ee5356c7ef572216cebcd27aa41f9df +replacements: +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'add one file' ' + : >one && + git update-index --add one && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +base 39d890139ee5356c7ef572216cebcd27aa41f9df +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +replacements: +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'disable split index' ' + git update-index --no-split-index && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + BASE=`test-dump-split-index .git/index | grep "^own" | sed "s/own/base/"` && + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +not a split index +EOF + test_cmp expect actual +' + +test_expect_success 'enable split index again, "one" now belongs to base index"' ' + git update-index --split-index && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +$BASE +replacements: +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'modify original file, base index untouched' ' + echo modified >one && + git update-index one && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + q_to_tab >expect <<EOF && +$BASE +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q +replacements: 0 +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'add another file, which stays index' ' + : >two && + git update-index --add two && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + q_to_tab >expect <<EOF && +$BASE +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +replacements: 0 +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'remove file not in base index' ' + git update-index --force-remove two && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + q_to_tab >expect <<EOF && +$BASE +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q +replacements: 0 +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'remove file in base index' ' + git update-index --force-remove one && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +$BASE +replacements: +deletions: 0 +EOF + test_cmp expect actual +' + +test_expect_success 'add original file back' ' + : >one && + git update-index --add one && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +$BASE +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +replacements: +deletions: 0 +EOF + test_cmp expect actual +' + +test_expect_success 'add new file' ' + : >two && + git update-index --add two && + git ls-files --stage >actual && + cat >expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +EOF + test_cmp expect actual +' + +test_expect_success 'unify index, two files remain' ' + git update-index --no-split-index && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +EOF + test_cmp ls-files.expect ls-files.actual + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +not a split index +EOF + test_cmp expect actual +' + +test_done diff --git a/t/t2004-checkout-cache-temp.sh b/t/t2004-checkout-cache-temp.sh index f171a5578b..a12afe93f3 100755 --- a/t/t2004-checkout-cache-temp.sh +++ b/t/t2004-checkout-cache-temp.sh @@ -10,202 +10,212 @@ rather than the tracked path.' . ./test-lib.sh -test_expect_success \ -'preparation' ' -mkdir asubdir && -echo tree1path0 >path0 && -echo tree1path1 >path1 && -echo tree1path3 >path3 && -echo tree1path4 >path4 && -echo tree1asubdir/path5 >asubdir/path5 && -git update-index --add path0 path1 path3 path4 asubdir/path5 && -t1=$(git write-tree) && -rm -f path* .merge_* out .git/index && -echo tree2path0 >path0 && -echo tree2path1 >path1 && -echo tree2path2 >path2 && -echo tree2path4 >path4 && -git update-index --add path0 path1 path2 path4 && -t2=$(git write-tree) && -rm -f path* .merge_* out .git/index && -echo tree2path0 >path0 && -echo tree3path1 >path1 && -echo tree3path2 >path2 && -echo tree3path3 >path3 && -git update-index --add path0 path1 path2 path3 && -t3=$(git write-tree)' - -test_expect_success \ -'checkout one stage 0 to temporary file' ' -rm -f path* .merge_* out .git/index && -git read-tree $t1 && -git checkout-index --temp -- path1 >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = path1 && -p=$(cut "-d " -f1 out) && -test -f $p && -test $(cat $p) = tree1path1' - -test_expect_success \ -'checkout all stage 0 to temporary files' ' -rm -f path* .merge_* out .git/index && -git read-tree $t1 && -git checkout-index -a --temp >out && -test_line_count = 5 out && -for f in path0 path1 path3 path4 asubdir/path5 -do - test $(grep $f out | cut "-d " -f2) = $f && - p=$(grep $f out | cut "-d " -f1) && +test_expect_success 'setup' ' + mkdir asubdir && + echo tree1path0 >path0 && + echo tree1path1 >path1 && + echo tree1path3 >path3 && + echo tree1path4 >path4 && + echo tree1asubdir/path5 >asubdir/path5 && + git update-index --add path0 path1 path3 path4 asubdir/path5 && + t1=$(git write-tree) && + rm -f path* .merge_* actual .git/index && + echo tree2path0 >path0 && + echo tree2path1 >path1 && + echo tree2path2 >path2 && + echo tree2path4 >path4 && + git update-index --add path0 path1 path2 path4 && + t2=$(git write-tree) && + rm -f path* .merge_* actual .git/index && + echo tree2path0 >path0 && + echo tree3path1 >path1 && + echo tree3path2 >path2 && + echo tree3path3 >path3 && + git update-index --add path0 path1 path2 path3 && + t3=$(git write-tree) +' + +test_expect_success 'checkout one stage 0 to temporary file' ' + rm -f path* .merge_* actual .git/index && + git read-tree $t1 && + git checkout-index --temp -- path1 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path1 && + p=$(cut "-d " -f1 actual) && test -f $p && - test $(cat $p) = tree1$f -done' - -test_expect_success \ -'prepare 3-way merge' ' -rm -f path* .merge_* out .git/index && -git read-tree -m $t1 $t2 $t3' - -test_expect_success \ -'checkout one stage 2 to temporary file' ' -rm -f path* .merge_* out && -git checkout-index --stage=2 --temp -- path1 >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = path1 && -p=$(cut "-d " -f1 out) && -test -f $p && -test $(cat $p) = tree2path1' - -test_expect_success \ -'checkout all stage 2 to temporary files' ' -rm -f path* .merge_* out && -git checkout-index --all --stage=2 --temp >out && -test_line_count = 3 out && -for f in path1 path2 path4 -do - test $(grep $f out | cut "-d " -f2) = $f && - p=$(grep $f out | cut "-d " -f1) && + test $(cat $p) = tree1path1 +' + +test_expect_success 'checkout all stage 0 to temporary files' ' + rm -f path* .merge_* actual .git/index && + git read-tree $t1 && + git checkout-index -a --temp >actual && + test_line_count = 5 actual && + for f in path0 path1 path3 path4 asubdir/path5 + do + test $(grep $f actual | cut "-d " -f2) = $f && + p=$(grep $f actual | cut "-d " -f1) && + test -f $p && + test $(cat $p) = tree1$f + done +' + +test_expect_success 'setup 3-way merge' ' + rm -f path* .merge_* actual .git/index && + git read-tree -m $t1 $t2 $t3 +' + +test_expect_success 'checkout one stage 2 to temporary file' ' + rm -f path* .merge_* actual && + git checkout-index --stage=2 --temp -- path1 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path1 && + p=$(cut "-d " -f1 actual) && test -f $p && - test $(cat $p) = tree2$f -done' - -test_expect_success \ -'checkout all stages/one file to nothing' ' -rm -f path* .merge_* out && -git checkout-index --stage=all --temp -- path0 >out && -test_line_count = 0 out' - -test_expect_success \ -'checkout all stages/one file to temporary files' ' -rm -f path* .merge_* out && -git checkout-index --stage=all --temp -- path1 >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = path1 && -cut "-d " -f1 out | (read s1 s2 s3 && -test -f $s1 && -test -f $s2 && -test -f $s3 && -test $(cat $s1) = tree1path1 && -test $(cat $s2) = tree2path1 && -test $(cat $s3) = tree3path1)' - -test_expect_success \ -'checkout some stages/one file to temporary files' ' -rm -f path* .merge_* out && -git checkout-index --stage=all --temp -- path2 >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = path2 && -cut "-d " -f1 out | (read s1 s2 s3 && -test $s1 = . && -test -f $s2 && -test -f $s3 && -test $(cat $s2) = tree2path2 && -test $(cat $s3) = tree3path2)' - -test_expect_success \ -'checkout all stages/all files to temporary files' ' -rm -f path* .merge_* out && -git checkout-index -a --stage=all --temp >out && -test_line_count = 5 out' - -test_expect_success \ -'-- path0: no entry' ' -test x$(grep path0 out | cut "-d " -f2) = x' - -test_expect_success \ -'-- path1: all 3 stages' ' -test $(grep path1 out | cut "-d " -f2) = path1 && -grep path1 out | cut "-d " -f1 | (read s1 s2 s3 && -test -f $s1 && -test -f $s2 && -test -f $s3 && -test $(cat $s1) = tree1path1 && -test $(cat $s2) = tree2path1 && -test $(cat $s3) = tree3path1)' - -test_expect_success \ -'-- path2: no stage 1, have stage 2 and 3' ' -test $(grep path2 out | cut "-d " -f2) = path2 && -grep path2 out | cut "-d " -f1 | (read s1 s2 s3 && -test $s1 = . && -test -f $s2 && -test -f $s3 && -test $(cat $s2) = tree2path2 && -test $(cat $s3) = tree3path2)' - -test_expect_success \ -'-- path3: no stage 2, have stage 1 and 3' ' -test $(grep path3 out | cut "-d " -f2) = path3 && -grep path3 out | cut "-d " -f1 | (read s1 s2 s3 && -test -f $s1 && -test $s2 = . && -test -f $s3 && -test $(cat $s1) = tree1path3 && -test $(cat $s3) = tree3path3)' - -test_expect_success \ -'-- path4: no stage 3, have stage 1 and 3' ' -test $(grep path4 out | cut "-d " -f2) = path4 && -grep path4 out | cut "-d " -f1 | (read s1 s2 s3 && -test -f $s1 && -test -f $s2 && -test $s3 = . && -test $(cat $s1) = tree1path4 && -test $(cat $s2) = tree2path4)' - -test_expect_success \ -'-- asubdir/path5: no stage 2 and 3 have stage 1' ' -test $(grep asubdir/path5 out | cut "-d " -f2) = asubdir/path5 && -grep asubdir/path5 out | cut "-d " -f1 | (read s1 s2 s3 && -test -f $s1 && -test $s2 = . && -test $s3 = . && -test $(cat $s1) = tree1asubdir/path5)' - -test_expect_success \ -'checkout --temp within subdir' ' -(cd asubdir && - git checkout-index -a --stage=all >out && - test_line_count = 1 out && - test $(grep path5 out | cut "-d " -f2) = path5 && - grep path5 out | cut "-d " -f1 | (read s1 s2 s3 && - test -f ../$s1 && - test $s2 = . && - test $s3 = . && - test $(cat ../$s1) = tree1asubdir/path5) -)' - -test_expect_success \ -'checkout --temp symlink' ' -rm -f path* .merge_* out .git/index && -test_ln_s_add b a && -t4=$(git write-tree) && -rm -f .git/index && -git read-tree $t4 && -git checkout-index --temp -a >out && -test_line_count = 1 out && -test $(cut "-d " -f2 out) = a && -p=$(cut "-d " -f1 out) && -test -f $p && -test $(cat $p) = b' + test $(cat $p) = tree2path1 +' + +test_expect_success 'checkout all stage 2 to temporary files' ' + rm -f path* .merge_* actual && + git checkout-index --all --stage=2 --temp >actual && + test_line_count = 3 actual && + for f in path1 path2 path4 + do + test $(grep $f actual | cut "-d " -f2) = $f && + p=$(grep $f actual | cut "-d " -f1) && + test -f $p && + test $(cat $p) = tree2$f + done +' + +test_expect_success 'checkout all stages/one file to nothing' ' + rm -f path* .merge_* actual && + git checkout-index --stage=all --temp -- path0 >actual && + test_line_count = 0 actual +' + +test_expect_success 'checkout all stages/one file to temporary files' ' + rm -f path* .merge_* actual && + git checkout-index --stage=all --temp -- path1 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path1 && + cut "-d " -f1 actual | (read s1 s2 s3 && + test -f $s1 && + test -f $s2 && + test -f $s3 && + test $(cat $s1) = tree1path1 && + test $(cat $s2) = tree2path1 && + test $(cat $s3) = tree3path1) +' + +test_expect_success 'checkout some stages/one file to temporary files' ' + rm -f path* .merge_* actual && + git checkout-index --stage=all --temp -- path2 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path2 && + cut "-d " -f1 actual | (read s1 s2 s3 && + test $s1 = . && + test -f $s2 && + test -f $s3 && + test $(cat $s2) = tree2path2 && + test $(cat $s3) = tree3path2) +' + +test_expect_success 'checkout all stages/all files to temporary files' ' + rm -f path* .merge_* actual && + git checkout-index -a --stage=all --temp >actual && + test_line_count = 5 actual +' + +test_expect_success '-- path0: no entry' ' + test x$(grep path0 actual | cut "-d " -f2) = x +' + +test_expect_success '-- path1: all 3 stages' ' + test $(grep path1 actual | cut "-d " -f2) = path1 && + grep path1 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f $s1 && + test -f $s2 && + test -f $s3 && + test $(cat $s1) = tree1path1 && + test $(cat $s2) = tree2path1 && + test $(cat $s3) = tree3path1) +' + +test_expect_success '-- path2: no stage 1, have stage 2 and 3' ' + test $(grep path2 actual | cut "-d " -f2) = path2 && + grep path2 actual | cut "-d " -f1 | (read s1 s2 s3 && + test $s1 = . && + test -f $s2 && + test -f $s3 && + test $(cat $s2) = tree2path2 && + test $(cat $s3) = tree3path2) +' + +test_expect_success '-- path3: no stage 2, have stage 1 and 3' ' + test $(grep path3 actual | cut "-d " -f2) = path3 && + grep path3 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f $s1 && + test $s2 = . && + test -f $s3 && + test $(cat $s1) = tree1path3 && + test $(cat $s3) = tree3path3) +' + +test_expect_success '-- path4: no stage 3, have stage 1 and 3' ' + test $(grep path4 actual | cut "-d " -f2) = path4 && + grep path4 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f $s1 && + test -f $s2 && + test $s3 = . && + test $(cat $s1) = tree1path4 && + test $(cat $s2) = tree2path4) +' + +test_expect_success '-- asubdir/path5: no stage 2 and 3 have stage 1' ' + test $(grep asubdir/path5 actual | cut "-d " -f2) = asubdir/path5 && + grep asubdir/path5 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f $s1 && + test $s2 = . && + test $s3 = . && + test $(cat $s1) = tree1asubdir/path5) +' + +test_expect_success 'checkout --temp within subdir' ' + ( + cd asubdir && + git checkout-index -a --stage=all >actual && + test_line_count = 1 actual && + test $(grep path5 actual | cut "-d " -f2) = path5 && + grep path5 actual | cut "-d " -f1 | (read s1 s2 s3 && + test -f ../$s1 && + test $s2 = . && + test $s3 = . && + test $(cat ../$s1) = tree1asubdir/path5) + ) +' + +test_expect_success 'checkout --temp symlink' ' + rm -f path* .merge_* actual .git/index && + test_ln_s_add path7 path6 && + git checkout-index --temp -a >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = path6 && + p=$(cut "-d " -f1 actual) && + test -f $p && + test $(cat $p) = path7 +' + +test_expect_success 'emit well-formed relative path' ' + rm -f path* .merge_* actual .git/index && + >path0123456789 && + git update-index --add path0123456789 && + ( + cd asubdir && + git checkout-index --temp -- ../path0123456789 >actual && + test_line_count = 1 actual && + test $(cut "-d " -f2 actual) = ../path0123456789 + ) +' test_done diff --git a/t/t2013-checkout-submodule.sh b/t/t2013-checkout-submodule.sh index 06b18f8bc1..6847f75822 100755 --- a/t/t2013-checkout-submodule.sh +++ b/t/t2013-checkout-submodule.sh @@ -3,6 +3,7 @@ test_description='checkout can handle submodules' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh test_expect_success 'setup' ' mkdir submodule && @@ -62,4 +63,8 @@ test_expect_success '"checkout <submodule>" honors submodule.*.ignore from .git/ ! test -s actual ' +test_submodule_switch "git checkout" + +test_submodule_forced_switch "git checkout -f" + test_done diff --git a/t/t2022-checkout-paths.sh b/t/t2022-checkout-paths.sh index 8e3545d868..f46d0499bc 100755 --- a/t/t2022-checkout-paths.sh +++ b/t/t2022-checkout-paths.sh @@ -61,4 +61,21 @@ test_expect_success 'do not touch unmerged entries matching $path but not in $tr test_cmp expect.next0 actual.next0 ' +test_expect_success 'do not touch files that are already up-to-date' ' + git reset --hard && + echo one >file1 && + echo two >file2 && + git add file1 file2 && + git commit -m base && + echo modified >file1 && + test-chmtime =1000000000 file2 && + git update-index -q --refresh && + git checkout HEAD -- file1 file2 && + echo one >expect && + test_cmp expect file1 && + echo "1000000000 file2" >expect && + test-chmtime -v +0 file2 >actual && + test_cmp expect actual +' + test_done diff --git a/t/t2024-checkout-dwim.sh b/t/t2024-checkout-dwim.sh index 6ecb559465..468a000e4b 100755 --- a/t/t2024-checkout-dwim.sh +++ b/t/t2024-checkout-dwim.sh @@ -185,4 +185,22 @@ test_expect_success 'checkout <branch> -- succeeds, even if a file with the same test_branch_upstream spam repo_c spam ' +test_expect_success 'loosely defined local base branch is reported correctly' ' + + git checkout master && + git branch strict && + git branch loose && + git commit --allow-empty -m "a bit more" && + + test_config branch.strict.remote . && + test_config branch.loose.remote . && + test_config branch.strict.merge refs/heads/master && + test_config branch.loose.merge master && + + git checkout strict | sed -e "s/strict/BRANCHNAME/g" >expect && + git checkout loose | sed -e "s/loose/BRANCHNAME/g" >actual && + + test_cmp expect actual +' + test_done diff --git a/t/t2104-update-index-skip-worktree.sh b/t/t2104-update-index-skip-worktree.sh index 29c1fb10ca..cc830da58d 100755 --- a/t/t2104-update-index-skip-worktree.sh +++ b/t/t2104-update-index-skip-worktree.sh @@ -7,6 +7,8 @@ test_description='skip-worktree bit test' . ./test-lib.sh +sane_unset GIT_TEST_SPLIT_INDEX + test_set_index_version 3 cat >expect.full <<EOF diff --git a/t/t2107-update-index-basic.sh b/t/t2107-update-index-basic.sh index 1bafb9098c..dfe02f4818 100755 --- a/t/t2107-update-index-basic.sh +++ b/t/t2107-update-index-basic.sh @@ -65,4 +65,19 @@ test_expect_success '--cacheinfo mode,sha1,path (new syntax)' ' test_cmp expect actual ' +test_expect_success '.lock files cleaned up' ' + mkdir cleanup && + ( + cd cleanup && + mkdir worktree && + git init repo && + cd repo && + git config core.worktree ../../worktree && + # --refresh triggers late setup_work_tree, + # active_cache_changed is zero, rollback_lock_file fails + git update-index --refresh && + ! test -f .git/index.lock + ) +' + test_done diff --git a/t/t3102-ls-tree-wildcards.sh b/t/t3102-ls-tree-wildcards.sh index c286854485..4d4b02e760 100755 --- a/t/t3102-ls-tree-wildcards.sh +++ b/t/t3102-ls-tree-wildcards.sh @@ -12,11 +12,25 @@ test_expect_success 'setup' ' ' test_expect_success 'ls-tree a[a] matches literally' ' - cat >expected <<EOF && -100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a[a]/three -EOF + cat >expect <<-\EOF && + 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a[a]/three + EOF git ls-tree -r HEAD "a[a]" >actual && - test_cmp expected actual + test_cmp expect actual +' + +test_expect_success 'ls-tree outside prefix' ' + cat >expect <<-\EOF && + 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 ../a[a]/three + EOF + ( cd aa && git ls-tree -r HEAD "../a[a]"; ) >actual && + test_cmp expect actual +' + +test_expect_failure 'ls-tree does not yet support negated pathspec' ' + git ls-files ":(exclude)a" "a*" >expect && + git ls-tree --name-only -r HEAD ":(exclude)a" "a*" >actual && + test_cmp expect actual ' test_done diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index ac31b711f2..ddea49808d 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -97,6 +97,20 @@ test_expect_success 'git branch -m o/o o should fail when o/p exists' ' test_must_fail git branch -m o/o o ' +test_expect_success 'git branch -m o/q o/p should fail when o/p exists' ' + git branch o/q && + test_must_fail git branch -m o/q o/p +' + +test_expect_success 'git branch -M o/q o/p should work when o/p exists' ' + git branch -M o/q o/p +' + +test_expect_success 'git branch -m -f o/q o/p should work when o/p exists' ' + git branch o/q && + git branch -m -f o/q o/p +' + test_expect_success 'git branch -m q r/q should fail when r exists' ' git branch q && git branch r && @@ -285,6 +299,15 @@ test_expect_success 'deleting a dangling symref' ' test_i18ncmp expect actual ' +test_expect_success 'deleting a self-referential symref' ' + git symbolic-ref refs/heads/self-reference refs/heads/self-reference && + test_path_is_file .git/refs/heads/self-reference && + echo "Deleted branch self-reference (was refs/heads/self-reference)." >expect && + git branch -d self-reference >actual && + test_path_is_missing .git/refs/heads/self-reference && + test_i18ncmp expect actual +' + test_expect_success 'renaming a symref is not allowed' ' git symbolic-ref refs/heads/master2 refs/heads/master && test_must_fail git branch -m master2 master3 && diff --git a/t/t3201-branch-contains.sh b/t/t3201-branch-contains.sh index 141b0611ea..912a6635a8 100755 --- a/t/t3201-branch-contains.sh +++ b/t/t3201-branch-contains.sh @@ -130,4 +130,33 @@ test_expect_success 'implicit --list conflicts with modification options' ' ' +# We want to set up a case where the walk for the tracking info +# of one branch crosses the tip of another branch (and make sure +# that the latter walk does not mess up our flag to see if it was +# merged). +# +# Here "topic" tracks "master" with one extra commit, and "zzz" points to the +# same tip as master The name "zzz" must come alphabetically after "topic" +# as we process them in that order. +test_expect_success 'branch --merged with --verbose' ' + git branch --track topic master && + git branch zzz topic && + git checkout topic && + test_commit foo && + git branch --merged topic >actual && + cat >expect <<-\EOF && + master + * topic + zzz + EOF + test_cmp expect actual && + git branch --verbose --merged topic >actual && + cat >expect <<-\EOF && + master c77a0a9 second on master + * topic 2c939f4 [ahead 1] foo + zzz c77a0a9 second on master + EOF + test_cmp expect actual +' + test_done diff --git a/t/t3210-pack-refs.sh b/t/t3210-pack-refs.sh index 1a2080e3dc..aa9eb3a3e5 100755 --- a/t/t3210-pack-refs.sh +++ b/t/t3210-pack-refs.sh @@ -11,7 +11,9 @@ semantic is still the same. ' . ./test-lib.sh -echo '[core] logallrefupdates = true' >>.git/config +test_expect_success 'enable reflogs' ' + git config core.logallrefupdates true +' test_expect_success \ 'prepare a trivial repository' \ @@ -151,4 +153,38 @@ test_expect_success 'delete ref while another dangling packed ref' ' test_cmp /dev/null result ' +test_expect_success 'pack ref directly below refs/' ' + git update-ref refs/top HEAD && + git pack-refs --all --prune && + grep refs/top .git/packed-refs && + test_path_is_missing .git/refs/top +' + +test_expect_success 'disable reflogs' ' + git config core.logallrefupdates false && + rm -rf .git/logs +' + +test_expect_success 'create packed foo/bar/baz branch' ' + git branch foo/bar/baz && + git pack-refs --all --prune && + test_path_is_missing .git/refs/heads/foo/bar/baz && + test_path_is_missing .git/logs/refs/heads/foo/bar/baz +' + +test_expect_success 'notice d/f conflict with existing directory' ' + test_must_fail git branch foo && + test_must_fail git branch foo/bar +' + +test_expect_success 'existing directory reports concrete ref' ' + test_must_fail git branch foo 2>stderr && + grep refs/heads/foo/bar/baz stderr +' + +test_expect_success 'notice d/f conflict with existing ref' ' + test_must_fail git branch foo/bar/baz/extra && + test_must_fail git branch foo/bar/baz/lots/of/extra/components +' + test_done diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh index cfd67ff3df..8cffd35fb0 100755 --- a/t/t3301-notes.sh +++ b/t/t3301-notes.sh @@ -7,28 +7,22 @@ test_description='Test commit notes' . ./test-lib.sh -cat > fake_editor.sh << \EOF -#!/bin/sh -echo "$MSG" > "$1" -echo "$MSG" >& 2 +write_script fake_editor <<\EOF +echo "$MSG" >"$1" +echo "$MSG" >&2 EOF -chmod a+x fake_editor.sh -GIT_EDITOR=./fake_editor.sh +GIT_EDITOR=./fake_editor export GIT_EDITOR +indent=" " + test_expect_success 'cannot annotate non-existing HEAD' ' test_must_fail env MSG=3 git notes add ' -test_expect_success setup ' - : > a1 && - git add a1 && - test_tick && - git commit -m 1st && - : > a2 && - git add a2 && - test_tick && - git commit -m 2nd +test_expect_success 'setup' ' + test_commit 1st && + test_commit 2nd ' test_expect_success 'need valid notes ref' ' @@ -50,206 +44,186 @@ test_expect_success 'handle empty notes gracefully' ' ' test_expect_success 'show non-existent notes entry with %N' ' - for l in A B - do - echo "$l" - done >expect && - git show -s --format='A%n%NB' >output && - test_cmp expect output + test_write_lines A B >expect && + git show -s --format="A%n%NB" >actual && + test_cmp expect actual ' test_expect_success 'create notes' ' - git config core.notesRef refs/notes/commits && MSG=b4 git notes add && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b4 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b4" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'show notes entry with %N' ' - for l in A b4 B - do - echo "$l" - done >expect && - git show -s --format='A%n%NB' >output && - test_cmp expect output + test_write_lines A b4 B >expect && + git show -s --format="A%n%NB" >actual && + test_cmp expect actual ' -cat >expect <<EOF -d423f8c refs/notes/commits@{0}: notes: Notes added by 'git notes add' -EOF - test_expect_success 'create reflog entry' ' - git reflog show refs/notes/commits >output && - test_cmp expect output + cat <<-EOF >expect && + a1d8fa6 refs/notes/commits@{0}: notes: Notes added by '\''git notes add'\'' + EOF + git reflog show refs/notes/commits >actual && + test_cmp expect actual ' test_expect_success 'edit existing notes' ' MSG=b3 git notes edit && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b3 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b3" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'cannot "git notes add -m" where notes already exists' ' test_must_fail git notes add -m "b2" && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b3 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b3" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'can overwrite existing note with "git notes add -f -m"' ' git notes add -f -m "b1" && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b1 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b1" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'add w/no options on existing note morphs into edit' ' MSG=b2 git notes add && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b2 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b2" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'can overwrite existing note with "git notes add -f"' ' MSG=b1 git notes add -f && - test ! -f .git/NOTES_EDITMSG && - test 1 = $(git ls-tree refs/notes/commits | wc -l) && - test b1 = $(git notes show) && + test_path_is_missing .git/NOTES_EDITMSG && + git ls-tree -r refs/notes/commits >actual && + test_line_count = 1 actual && + test "b1" = "$(git notes show)" && git show HEAD^ && test_must_fail git notes show HEAD^ ' -cat > expect << EOF -commit 268048bfb8a1fb38e703baceb8ab235421bf80c5 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:14:13 2005 -0700 - - 2nd +test_expect_success 'show notes' ' + cat >expect <<-EOF && + commit 7a4ca6ee52a974a66cbaa78e33214535dff1d691 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:14:13 2005 -0700 -Notes: - b1 -EOF + ${indent}2nd -test_expect_success 'show notes' ' + Notes: + ${indent}b1 + EOF ! (git cat-file commit HEAD | grep b1) && - git log -1 > output && - test_cmp expect output -' - -test_expect_success 'create multi-line notes (setup)' ' - : > a3 && - git add a3 && - test_tick && - git commit -m 3rd && - MSG="b3 -c3c3c3c3 -d3d3d3" git notes add + git log -1 >actual && + test_cmp expect actual ' -cat > expect-multiline << EOF -commit 1584215f1d29c65e99c6c6848626553fdd07fd75 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:15:13 2005 -0700 - - 3rd +test_expect_success 'show multi-line notes' ' + test_commit 3rd && + MSG="b3${LF}c3c3c3c3${LF}d3d3d3" git notes add && + cat >expect-multiline <<-EOF && + commit d07d62e5208f22eb5695e7eb47667dc8b9860290 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 -Notes: - b3 - c3c3c3c3 - d3d3d3 -EOF + ${indent}3rd -printf "\n" >> expect-multiline -cat expect >> expect-multiline + Notes: + ${indent}b3 + ${indent}c3c3c3c3 + ${indent}d3d3d3 -test_expect_success 'show multi-line notes' ' - git log -2 > output && - test_cmp expect-multiline output -' -test_expect_success 'create -F notes (setup)' ' - : > a4 && - git add a4 && - test_tick && - git commit -m 4th && - echo "xyzzy" > note5 && - git notes add -F note5 + EOF + cat expect >>expect-multiline && + git log -2 >actual && + test_cmp expect-multiline actual ' -cat > expect-F << EOF -commit 15023535574ded8b1a89052b32673f84cf9582b8 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:16:13 2005 -0700 +test_expect_success 'show -F notes' ' + test_commit 4th && + echo "xyzzy" >note5 && + git notes add -F note5 && + cat >expect-F <<-EOF && + commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 - 4th + ${indent}4th -Notes: - xyzzy -EOF + Notes: + ${indent}xyzzy -printf "\n" >> expect-F -cat expect-multiline >> expect-F - -test_expect_success 'show -F notes' ' - git log -3 > output && - test_cmp expect-F output + EOF + cat expect-multiline >>expect-F && + git log -3 >actual && + test_cmp expect-F actual ' test_expect_success 'Re-adding -F notes without -f fails' ' - echo "zyxxy" > note5 && + echo "zyxxy" >note5 && test_must_fail git notes add -F note5 && - git log -3 > output && - test_cmp expect-F output + git log -3 >actual && + test_cmp expect-F actual ' -cat >expect << EOF -commit 15023535574ded8b1a89052b32673f84cf9582b8 -tree e070e3af51011e47b183c33adf9736736a525709 -parent 1584215f1d29c65e99c6c6848626553fdd07fd75 -author A U Thor <author@example.com> 1112912173 -0700 -committer C O Mitter <committer@example.com> 1112912173 -0700 - - 4th -EOF test_expect_success 'git log --pretty=raw does not show notes' ' - git log -1 --pretty=raw >output && - test_cmp expect output + cat >expect <<-EOF && + commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + tree 05ac65288c4c4b3b709a020ae94b2ece2f2201ae + parent d07d62e5208f22eb5695e7eb47667dc8b9860290 + author A U Thor <author@example.com> 1112912173 -0700 + committer C O Mitter <committer@example.com> 1112912173 -0700 + + ${indent}4th + EOF + git log -1 --pretty=raw >actual && + test_cmp expect actual ' -cat >>expect <<EOF - -Notes: - xyzzy -EOF test_expect_success 'git log --show-notes' ' - git log -1 --pretty=raw --show-notes >output && - test_cmp expect output + cat >>expect <<-EOF && + + Notes: + ${indent}xyzzy + EOF + git log -1 --pretty=raw --show-notes >actual && + test_cmp expect actual ' test_expect_success 'git log --no-notes' ' - git log -1 --no-notes >output && - ! grep xyzzy output + git log -1 --no-notes >actual && + ! grep xyzzy actual ' test_expect_success 'git format-patch does not show notes' ' - git format-patch -1 --stdout >output && - ! grep xyzzy output + git format-patch -1 --stdout >actual && + ! grep xyzzy actual ' test_expect_success 'git format-patch --show-notes does show notes' ' - git format-patch --show-notes -1 --stdout >output && - grep xyzzy output + git format-patch --show-notes -1 --stdout >actual && + grep xyzzy actual ' for pretty in \ @@ -261,8 +235,8 @@ do ?*) p="$pretty" not=" not" negate="!" ;; esac test_expect_success "git show $pretty does$not show notes" ' - git show $p >output && - eval "$negate grep xyzzy output" + git show $p >actual && + eval "$negate grep xyzzy actual" ' done @@ -271,161 +245,131 @@ test_expect_success 'setup alternate notes ref' ' ' test_expect_success 'git log --notes shows default notes' ' - git log -1 --notes >output && - grep xyzzy output && - ! grep alternate output + git log -1 --notes >actual && + grep xyzzy actual && + ! grep alternate actual ' test_expect_success 'git log --notes=X shows only X' ' - git log -1 --notes=alternate >output && - ! grep xyzzy output && - grep alternate output + git log -1 --notes=alternate >actual && + ! grep xyzzy actual && + grep alternate actual ' test_expect_success 'git log --notes --notes=X shows both' ' - git log -1 --notes --notes=alternate >output && - grep xyzzy output && - grep alternate output + git log -1 --notes --notes=alternate >actual && + grep xyzzy actual && + grep alternate actual ' test_expect_success 'git log --no-notes resets default state' ' git log -1 --notes --notes=alternate \ --no-notes --notes=alternate \ - >output && - ! grep xyzzy output && - grep alternate output + >actual && + ! grep xyzzy actual && + grep alternate actual ' test_expect_success 'git log --no-notes resets ref list' ' git log -1 --notes --notes=alternate \ --no-notes --notes \ - >output && - grep xyzzy output && - ! grep alternate output -' - -test_expect_success 'create -m notes (setup)' ' - : > a5 && - git add a5 && - test_tick && - git commit -m 5th && - git notes add -m spam -m "foo -bar -baz" -' - -whitespace=" " -cat > expect-m << EOF -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 - - 5th - -Notes: - spam -$whitespace - foo - bar - baz -EOF - -printf "\n" >> expect-m -cat expect-F >> expect-m - -test_expect_success 'show -m notes' ' - git log -4 > output && - test_cmp expect-m output + >actual && + grep xyzzy actual && + ! grep alternate actual ' -test_expect_success 'remove note with add -f -F /dev/null (setup)' ' - git notes add -f -F /dev/null -' - -cat > expect-rm-F << EOF -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 - - 5th -EOF - -printf "\n" >> expect-rm-F -cat expect-F >> expect-rm-F - -test_expect_success 'verify note removal with -F /dev/null' ' - git log -4 > output && - test_cmp expect-rm-F output && +test_expect_success 'show -m notes' ' + test_commit 5th && + git notes add -m spam -m "foo${LF}bar${LF}baz" && + cat >expect-m <<-EOF && + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 + + ${indent}5th + + Notes: + ${indent}spam + ${indent} + ${indent}foo + ${indent}bar + ${indent}baz + + EOF + cat expect-F >>expect-m && + git log -4 >actual && + test_cmp expect-m actual +' + +test_expect_success 'remove note with add -f -F /dev/null' ' + git notes add -f -F /dev/null && + cat >expect-rm-F <<-EOF && + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 + + ${indent}5th + + EOF + cat expect-F >>expect-rm-F && + git log -4 >actual && + test_cmp expect-rm-F actual && test_must_fail git notes show ' -test_expect_success 'do not create empty note with -m "" (setup)' ' - git notes add -m "" -' - -test_expect_success 'verify non-creation of note with -m ""' ' - git log -4 > output && - test_cmp expect-rm-F output && +test_expect_success 'do not create empty note with -m ""' ' + git notes add -m "" && + git log -4 >actual && + test_cmp expect-rm-F actual && test_must_fail git notes show ' -cat > expect-combine_m_and_F << EOF -foo - -xyzzy +test_expect_success 'create note with combination of -m and -F' ' + cat >expect-combine_m_and_F <<-EOF && + foo -bar + xyzzy -zyxxy + bar -baz -EOF + zyxxy -test_expect_success 'create note with combination of -m and -F' ' - echo "xyzzy" > note_a && - echo "zyxxy" > note_b && + baz + EOF + echo "xyzzy" >note_a && + echo "zyxxy" >note_b && git notes add -m "foo" -F note_a -m "bar" -F note_b -m "baz" && - git notes show > output && - test_cmp expect-combine_m_and_F output + git notes show >actual && + test_cmp expect-combine_m_and_F actual ' -test_expect_success 'remove note with "git notes remove" (setup)' ' +test_expect_success 'remove note with "git notes remove"' ' git notes remove HEAD^ && - git notes remove -' - -cat > expect-rm-remove << EOF -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 + git notes remove && + cat >expect-rm-remove <<-EOF && + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 - 5th + ${indent}5th -commit 15023535574ded8b1a89052b32673f84cf9582b8 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:16:13 2005 -0700 + commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 - 4th -EOF - -printf "\n" >> expect-rm-remove -cat expect-multiline >> expect-rm-remove + ${indent}4th -test_expect_success 'verify note removal with "git notes remove"' ' - git log -4 > output && - test_cmp expect-rm-remove output && + EOF + cat expect-multiline >>expect-rm-remove && + git log -4 >actual && + test_cmp expect-rm-remove actual && test_must_fail git notes show HEAD^ ' -cat > expect << EOF -c18dc024e14f08d18d14eea0d747ff692d66d6a3 1584215f1d29c65e99c6c6848626553fdd07fd75 -c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 268048bfb8a1fb38e703baceb8ab235421bf80c5 -EOF - test_expect_success 'removing non-existing note should not create new commit' ' - git rev-parse --verify refs/notes/commits > before_commit && + git rev-parse --verify refs/notes/commits >before_commit && test_must_fail git notes remove HEAD^ && - git rev-parse --verify refs/notes/commits > after_commit && + git rev-parse --verify refs/notes/commits >after_commit && test_cmp before_commit after_commit ' @@ -505,70 +449,68 @@ test_expect_success 'removing with --stdin --ignore-missing' ' ' test_expect_success 'list notes with "git notes list"' ' - git notes list > output && - test_cmp expect output + cat >expect <<-EOF && + c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 7a4ca6ee52a974a66cbaa78e33214535dff1d691 + c18dc024e14f08d18d14eea0d747ff692d66d6a3 d07d62e5208f22eb5695e7eb47667dc8b9860290 + EOF + git notes list >actual && + test_cmp expect actual ' test_expect_success 'list notes with "git notes"' ' - git notes > output && - test_cmp expect output + git notes >actual && + test_cmp expect actual ' -cat > expect << EOF -c18dc024e14f08d18d14eea0d747ff692d66d6a3 -EOF - test_expect_success 'list specific note with "git notes list <object>"' ' - git notes list HEAD^^ > output && - test_cmp expect output + cat >expect <<-EOF && + c18dc024e14f08d18d14eea0d747ff692d66d6a3 + EOF + git notes list HEAD^^ >actual && + test_cmp expect actual ' -cat > expect << EOF -EOF - test_expect_success 'listing non-existing notes fails' ' - test_must_fail git notes list HEAD > output && - test_cmp expect output + cat >expect <<-EOF && + EOF + test_must_fail git notes list HEAD >actual && + test_cmp expect actual ' -cat > expect << EOF -Initial set of notes - -More notes appended with git notes append -EOF - test_expect_success 'append to existing note with "git notes append"' ' + cat >expect <<-EOF && + Initial set of notes + + More notes appended with git notes append + EOF git notes add -m "Initial set of notes" && git notes append -m "More notes appended with git notes append" && - git notes show > output && - test_cmp expect output + git notes show >actual && + test_cmp expect actual ' -cat > expect_list << EOF -c18dc024e14f08d18d14eea0d747ff692d66d6a3 1584215f1d29c65e99c6c6848626553fdd07fd75 -c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 268048bfb8a1fb38e703baceb8ab235421bf80c5 -4b6ad22357cc8a1296720574b8d2fbc22fab0671 bd1753200303d0a0344be813e504253b3d98e74d -EOF - test_expect_success '"git notes list" does not expand to "git notes list HEAD"' ' - git notes list > output && - test_cmp expect_list output + cat >expect_list <<-EOF && + c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 7a4ca6ee52a974a66cbaa78e33214535dff1d691 + 4b6ad22357cc8a1296720574b8d2fbc22fab0671 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + c18dc024e14f08d18d14eea0d747ff692d66d6a3 d07d62e5208f22eb5695e7eb47667dc8b9860290 + EOF + git notes list >actual && + test_cmp expect_list actual ' test_expect_success 'appending empty string does not change existing note' ' git notes append -m "" && - git notes show > output && - test_cmp expect output + git notes show >actual && + test_cmp expect actual ' test_expect_success 'git notes append == add when there is no existing note' ' git notes remove HEAD && test_must_fail git notes list HEAD && - git notes append -m "Initial set of notes - -More notes appended with git notes append" && - git notes show > output && - test_cmp expect output + git notes append -m "Initial set of notes${LF}${LF}More notes appended with git notes append" && + git notes show >actual && + test_cmp expect actual ' test_expect_success 'appending empty string to non-existing note does not create note' ' @@ -579,229 +521,208 @@ test_expect_success 'appending empty string to non-existing note does not create ' test_expect_success 'create other note on a different notes ref (setup)' ' - : > a6 && - git add a6 && - test_tick && - git commit -m 6th && - GIT_NOTES_REF="refs/notes/other" git notes add -m "other note" -' + test_commit 6th && + GIT_NOTES_REF="refs/notes/other" git notes add -m "other note" && + cat >expect-not-other <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -cat > expect-other << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th - -Notes (other): - other note -EOF + ${indent}6th + EOF + cp expect-not-other expect-other && + cat >>expect-other <<-EOF -cat > expect-not-other << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th -EOF + Notes (other): + ${indent}other note + EOF +' test_expect_success 'Do not show note on other ref by default' ' - git log -1 > output && - test_cmp expect-not-other output + git log -1 >actual && + test_cmp expect-not-other actual ' test_expect_success 'Do show note when ref is given in GIT_NOTES_REF' ' - GIT_NOTES_REF="refs/notes/other" git log -1 > output && - test_cmp expect-other output + GIT_NOTES_REF="refs/notes/other" git log -1 >actual && + test_cmp expect-other actual ' test_expect_success 'Do show note when ref is given in core.notesRef config' ' - git config core.notesRef "refs/notes/other" && - git log -1 > output && - test_cmp expect-other output + test_config core.notesRef "refs/notes/other" && + git log -1 >actual && + test_cmp expect-other actual ' test_expect_success 'Do not show note when core.notesRef is overridden' ' - GIT_NOTES_REF="refs/notes/wrong" git log -1 > output && - test_cmp expect-not-other output + test_config core.notesRef "refs/notes/other" && + GIT_NOTES_REF="refs/notes/wrong" git log -1 >actual && + test_cmp expect-not-other actual ' -cat > expect-both << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th +test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' ' + cat >expect-both <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -Notes: - order test + ${indent}6th -Notes (other): - other note + Notes: + ${indent}order test -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 + Notes (other): + ${indent}other note - 5th + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 -Notes: - replacement for deleted note -EOF + ${indent}5th -test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' ' + Notes: + ${indent}replacement for deleted note + EOF GIT_NOTES_REF=refs/notes/commits git notes add \ -m"replacement for deleted note" HEAD^ && GIT_NOTES_REF=refs/notes/commits git notes add -m"order test" && - git config --unset core.notesRef && - git config notes.displayRef "refs/notes/*" && - git log -2 > output && - test_cmp expect-both output + test_unconfig core.notesRef && + test_config notes.displayRef "refs/notes/*" && + git log -2 >actual && + test_cmp expect-both actual ' test_expect_success 'core.notesRef is implicitly in notes.displayRef' ' - git config core.notesRef refs/notes/commits && - git config notes.displayRef refs/notes/other && - git log -2 > output && - test_cmp expect-both output + test_config core.notesRef refs/notes/commits && + test_config notes.displayRef refs/notes/other && + git log -2 >actual && + test_cmp expect-both actual ' test_expect_success 'notes.displayRef can be given more than once' ' - git config --unset core.notesRef && - git config notes.displayRef refs/notes/commits && + test_unconfig core.notesRef && + test_config notes.displayRef refs/notes/commits && git config --add notes.displayRef refs/notes/other && - git log -2 > output && - test_cmp expect-both output + git log -2 >actual && + test_cmp expect-both actual ' -cat > expect-both-reversed << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th +test_expect_success 'notes.displayRef respects order' ' + cat >expect-both-reversed <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -Notes (other): - other note + ${indent}6th -Notes: - order test -EOF + Notes (other): + ${indent}other note -test_expect_success 'notes.displayRef respects order' ' - git config core.notesRef refs/notes/other && - git config --unset-all notes.displayRef && - git config notes.displayRef refs/notes/commits && - git log -1 > output && - test_cmp expect-both-reversed output + Notes: + ${indent}order test + EOF + test_config core.notesRef refs/notes/other && + test_config notes.displayRef refs/notes/commits && + git log -1 >actual && + test_cmp expect-both-reversed actual ' test_expect_success 'GIT_NOTES_DISPLAY_REF works' ' - git config --unset-all core.notesRef && - git config --unset-all notes.displayRef && GIT_NOTES_DISPLAY_REF=refs/notes/commits:refs/notes/other \ - git log -2 > output && - test_cmp expect-both output + git log -2 >actual && + test_cmp expect-both actual ' -cat > expect-none << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th +test_expect_success 'GIT_NOTES_DISPLAY_REF overrides config' ' + cat >expect-none <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -commit bd1753200303d0a0344be813e504253b3d98e74d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:17:13 2005 -0700 + ${indent}6th - 5th -EOF + commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:17:13 2005 -0700 -test_expect_success 'GIT_NOTES_DISPLAY_REF overrides config' ' - git config notes.displayRef "refs/notes/*" && - GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log -2 > output && - test_cmp expect-none output + ${indent}5th + EOF + test_config notes.displayRef "refs/notes/*" && + GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log -2 >actual && + test_cmp expect-none actual ' test_expect_success '--show-notes=* adds to GIT_NOTES_DISPLAY_REF' ' - GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log --show-notes=* -2 > output && - test_cmp expect-both output + GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log --show-notes=* -2 >actual && + test_cmp expect-both actual ' -cat > expect-commits << EOF -commit 387a89921c73d7ed72cd94d179c1c7048ca47756 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:18:13 2005 -0700 - - 6th +test_expect_success '--no-standard-notes' ' + cat >expect-commits <<-EOF && + commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:18:13 2005 -0700 -Notes: - order test -EOF + ${indent}6th -test_expect_success '--no-standard-notes' ' - git log --no-standard-notes --show-notes=commits -1 > output && - test_cmp expect-commits output + Notes: + ${indent}order test + EOF + git log --no-standard-notes --show-notes=commits -1 >actual && + test_cmp expect-commits actual ' test_expect_success '--standard-notes' ' + test_config notes.displayRef "refs/notes/*" && git log --no-standard-notes --show-notes=commits \ - --standard-notes -2 > output && - test_cmp expect-both output + --standard-notes -2 >actual && + test_cmp expect-both actual ' test_expect_success '--show-notes=ref accumulates' ' git log --show-notes=other --show-notes=commits \ - --no-standard-notes -1 > output && - test_cmp expect-both-reversed output + --no-standard-notes -1 >actual && + test_cmp expect-both-reversed actual ' test_expect_success 'Allow notes on non-commits (trees, blobs, tags)' ' - git config core.notesRef refs/notes/other && - echo "Note on a tree" > expect && + test_config core.notesRef refs/notes/other && + echo "Note on a tree" >expect && git notes add -m "Note on a tree" HEAD: && - git notes show HEAD: > actual && + git notes show HEAD: >actual && test_cmp expect actual && - echo "Note on a blob" > expect && + echo "Note on a blob" >expect && filename=$(git ls-tree --name-only HEAD | head -n1) && git notes add -m "Note on a blob" HEAD:$filename && - git notes show HEAD:$filename > actual && + git notes show HEAD:$filename >actual && test_cmp expect actual && - echo "Note on a tag" > expect && + echo "Note on a tag" >expect && git tag -a -m "This is an annotated tag" foobar HEAD^ && git notes add -m "Note on a tag" foobar && - git notes show foobar > actual && + git notes show foobar >actual && test_cmp expect actual ' -cat > expect << EOF -commit 2ede89468182a62d0bde2583c736089bcf7d7e92 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:19:13 2005 -0700 - - 7th +test_expect_success 'create note from other note with "git notes add -C"' ' + cat >expect <<-EOF && + commit fb01e0ca8c33b6cc0c6451dde747f97df567cb5c + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:19:13 2005 -0700 -Notes (other): - other note -EOF + ${indent}7th -test_expect_success 'create note from other note with "git notes add -C"' ' - : > a7 && - git add a7 && - test_tick && - git commit -m 7th && + Notes: + ${indent}order test + EOF + test_commit 7th && git notes add -C $(git notes list HEAD^) && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD^)" ' test_expect_success 'create note from non-existing note with "git notes add -C" fails' ' - : > a8 && - git add a8 && - test_tick && - git commit -m 8th && + test_commit 8th && test_must_fail git notes add -C deadbeef && test_must_fail git notes list HEAD ' @@ -814,405 +735,386 @@ test_expect_success 'create note from non-blob with "git notes add -C" fails' ' test_must_fail git notes list HEAD ' -cat > expect << EOF -commit 80d796defacd5db327b7a4e50099663902fbdc5c -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:20:13 2005 -0700 - - 8th +test_expect_success 'create note from blob with "git notes add -C" reuses blob id' ' + cat >expect <<-EOF && + commit 9a4c31c7f722b5d517e92c64e932dd751e1413bf + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:20:13 2005 -0700 -Notes (other): - This is a blob object -EOF + ${indent}8th -test_expect_success 'create note from blob with "git notes add -C" reuses blob id' ' + Notes: + ${indent}This is a blob object + EOF blob=$(echo "This is a blob object" | git hash-object -w --stdin) && git notes add -C $blob && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$blob" ' -cat > expect << EOF -commit 016e982bad97eacdbda0fcbd7ce5b0ba87c81f1b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:21:13 2005 -0700 - - 9th +test_expect_success 'create note from other note with "git notes add -c"' ' + cat >expect <<-EOF && + commit 2e0db4bc649e174d667a1cde19e725cf897a5bd2 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:21:13 2005 -0700 -Notes (other): - yet another note -EOF + ${indent}9th -test_expect_success 'create note from other note with "git notes add -c"' ' - : > a9 && - git add a9 && - test_tick && - git commit -m 9th && + Notes: + ${indent}yet another note + EOF + test_commit 9th && MSG="yet another note" git notes add -c $(git notes list HEAD^^) && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual ' test_expect_success 'create note from non-existing note with "git notes add -c" fails' ' - : > a10 && - git add a10 && - test_tick && - git commit -m 10th && + test_commit 10th && test_must_fail env MSG="yet another note" git notes add -c deadbeef && test_must_fail git notes list HEAD ' -cat > expect << EOF -commit 016e982bad97eacdbda0fcbd7ce5b0ba87c81f1b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:21:13 2005 -0700 - - 9th - -Notes (other): - yet another note -$whitespace - yet another note -EOF - test_expect_success 'append to note from other note with "git notes append -C"' ' + cat >expect <<-EOF && + commit 2e0db4bc649e174d667a1cde19e725cf897a5bd2 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:21:13 2005 -0700 + + ${indent}9th + + Notes: + ${indent}yet another note + ${indent} + ${indent}yet another note + EOF git notes append -C $(git notes list HEAD^) HEAD^ && - git log -1 HEAD^ > actual && + git log -1 HEAD^ >actual && test_cmp expect actual ' -cat > expect << EOF -commit ffed603236bfa3891c49644257a83598afe8ae5a -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:22:13 2005 -0700 +test_expect_success 'create note from other note with "git notes append -c"' ' + cat >expect <<-EOF && + commit 7c3b87ab368f81e11b1ea87b2ab99a71ccd25406 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:22:13 2005 -0700 - 10th + ${indent}10th -Notes (other): - other note -EOF - -test_expect_success 'create note from other note with "git notes append -c"' ' + Notes: + ${indent}other note + EOF MSG="other note" git notes append -c $(git notes list HEAD^) && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual ' -cat > expect << EOF -commit ffed603236bfa3891c49644257a83598afe8ae5a -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:22:13 2005 -0700 - - 10th - -Notes (other): - other note -$whitespace - yet another note -EOF - test_expect_success 'append to note from other note with "git notes append -c"' ' + cat >expect <<-EOF && + commit 7c3b87ab368f81e11b1ea87b2ab99a71ccd25406 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:22:13 2005 -0700 + + ${indent}10th + + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF MSG="yet another note" git notes append -c $(git notes list HEAD) && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual ' -cat > expect << EOF -commit 6352c5e33dbcab725fe0579be16aa2ba8eb369be -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:23:13 2005 -0700 - - 11th - -Notes (other): - other note -$whitespace - yet another note -EOF - test_expect_success 'copy note with "git notes copy"' ' - : > a11 && - git add a11 && - test_tick && - git commit -m 11th && + cat >expect <<-EOF && + commit a446fff8777efdc6eb8f4b7c8a5ff699484df0d5 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:23:13 2005 -0700 + + ${indent}11th + + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF + test_commit 11th && git notes copy HEAD^ HEAD && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD^)" ' test_expect_success 'prevent overwrite with "git notes copy"' ' test_must_fail git notes copy HEAD~2 HEAD && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD^)" ' -cat > expect << EOF -commit 6352c5e33dbcab725fe0579be16aa2ba8eb369be -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:23:13 2005 -0700 - - 11th - -Notes (other): - yet another note -$whitespace - yet another note -EOF - test_expect_success 'allow overwrite with "git notes copy -f"' ' + cat >expect <<-EOF && + commit a446fff8777efdc6eb8f4b7c8a5ff699484df0d5 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:23:13 2005 -0700 + + ${indent}11th + + Notes: + ${indent}yet another note + ${indent} + ${indent}yet another note + EOF git notes copy -f HEAD~2 HEAD && - git log -1 > actual && + git log -1 >actual && test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" ' test_expect_success 'cannot copy note from object without notes' ' - : > a12 && - git add a12 && - test_tick && - git commit -m 12th && - : > a13 && - git add a13 && - test_tick && - git commit -m 13th && + test_commit 12th && + test_commit 13th && test_must_fail git notes copy HEAD^ HEAD ' -cat > expect << EOF -commit e5d4fb5698d564ab8c73551538ecaf2b0c666185 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:25:13 2005 -0700 - - 13th +test_expect_success 'git notes copy --stdin' ' + cat >expect <<-EOF && + commit e871aa61182b1d95d0a6fb75445d891722863b6b + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:25:13 2005 -0700 -Notes (other): - yet another note -$whitespace - yet another note + ${indent}13th -commit 7038787dfe22a14c3867ce816dbba39845359719 -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:24:13 2005 -0700 + Notes: + ${indent}yet another note + ${indent} + ${indent}yet another note - 12th + commit 65e263ded02ae4e8839bc151095113737579dc12 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:24:13 2005 -0700 -Notes (other): - other note -$whitespace - yet another note -EOF + ${indent}12th -test_expect_success 'git notes copy --stdin' ' + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \ echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | git notes copy --stdin && - git log -2 > output && - test_cmp expect output && + git log -2 >actual && + test_cmp expect actual && test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" && test "$(git notes list HEAD^)" = "$(git notes list HEAD~3)" ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th +test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 -commit be28d8b4d9951ad940d229ee3b0b9ee3b1ec273d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:26:13 2005 -0700 + ${indent}15th - 14th -EOF + commit 07c85d77059393ed0154b8c96906547a59dfcddd + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:26:13 2005 -0700 -test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' + ${indent}14th + EOF test_commit 14th && test_commit 15th && (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \ echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | git notes copy --for-rewrite=foo && - git log -2 > output && - test_cmp expect output + git log -2 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th - -Notes (other): - yet another note -$whitespace - yet another note - -commit be28d8b4d9951ad940d229ee3b0b9ee3b1ec273d -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:26:13 2005 -0700 - - 14th - -Notes (other): - other note -$whitespace - yet another note -EOF - test_expect_success 'git notes copy --for-rewrite (enabled)' ' - git config notes.rewriteMode overwrite && - git config notes.rewriteRef "refs/notes/*" && + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 + + ${indent}15th + + Notes: + ${indent}yet another note + ${indent} + ${indent}yet another note + + commit 07c85d77059393ed0154b8c96906547a59dfcddd + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:26:13 2005 -0700 + + ${indent}14th + + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF + test_config notes.rewriteMode overwrite && + test_config notes.rewriteRef "refs/notes/*" && (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \ echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | git notes copy --for-rewrite=foo && - git log -2 > output && - test_cmp expect output + git log -2 >actual && + test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (disabled)' ' - git config notes.rewrite.bar false && + test_config notes.rewrite.bar false && echo $(git rev-parse HEAD~3) $(git rev-parse HEAD) | git notes copy --for-rewrite=bar && - git log -2 > output && - test_cmp expect output + git log -2 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th +test_expect_success 'git notes copy --for-rewrite (overwrite)' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 -Notes (other): - a fresh note -EOF + ${indent}15th -test_expect_success 'git notes copy --for-rewrite (overwrite)' ' + Notes: + ${indent}a fresh note + EOF git notes add -f -m"a fresh note" HEAD^ && + test_config notes.rewriteMode overwrite && + test_config notes.rewriteRef "refs/notes/*" && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (ignore)' ' - git config notes.rewriteMode ignore && + test_config notes.rewriteMode ignore && + test_config notes.rewriteRef "refs/notes/*" && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th - -Notes (other): - a fresh note -$whitespace - another fresh note -EOF - test_expect_success 'git notes copy --for-rewrite (append)' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 + + ${indent}15th + + Notes: + ${indent}a fresh note + ${indent} + ${indent}another fresh note + EOF git notes add -f -m"another fresh note" HEAD^ && - git config notes.rewriteMode concatenate && + test_config notes.rewriteMode concatenate && + test_config notes.rewriteRef "refs/notes/*" && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th - -Notes (other): - a fresh note -$whitespace - another fresh note -$whitespace - append 1 -$whitespace - append 2 -EOF - test_expect_success 'git notes copy --for-rewrite (append two to one)' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 + + ${indent}15th + + Notes: + ${indent}a fresh note + ${indent} + ${indent}another fresh note + ${indent} + ${indent}append 1 + ${indent} + ${indent}append 2 + EOF git notes add -f -m"append 1" HEAD^ && git notes add -f -m"append 2" HEAD^^ && + test_config notes.rewriteMode concatenate && + test_config notes.rewriteRef "refs/notes/*" && (echo $(git rev-parse HEAD^) $(git rev-parse HEAD); echo $(git rev-parse HEAD^^) $(git rev-parse HEAD)) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (append empty)' ' git notes remove HEAD^ && + test_config notes.rewriteMode concatenate && + test_config notes.rewriteRef "refs/notes/*" && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 - - 15th - -Notes (other): - replacement note 1 -EOF - test_expect_success 'GIT_NOTES_REWRITE_MODE works' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 + + ${indent}15th + + Notes: + ${indent}replacement note 1 + EOF + test_config notes.rewriteMode concatenate && + test_config notes.rewriteRef "refs/notes/*" && git notes add -f -m"replacement note 1" HEAD^ && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | GIT_NOTES_REWRITE_MODE=overwrite git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' -cat > expect << EOF -commit 37a0d4cba38afef96ba54a3ea567e6dac575700b -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:27:13 2005 -0700 +test_expect_success 'GIT_NOTES_REWRITE_REF works' ' + cat >expect <<-EOF && + commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:27:13 2005 -0700 - 15th + ${indent}15th -Notes (other): - replacement note 2 -EOF - -test_expect_success 'GIT_NOTES_REWRITE_REF works' ' - git config notes.rewriteMode overwrite && + Notes: + ${indent}replacement note 2 + EOF git notes add -f -m"replacement note 2" HEAD^ && - git config --unset-all notes.rewriteRef && + test_config notes.rewriteMode overwrite && + test_unconfig notes.rewriteRef && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | GIT_NOTES_REWRITE_REF=refs/notes/commits:refs/notes/other \ git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' test_expect_success 'GIT_NOTES_REWRITE_REF overrides config' ' - git config notes.rewriteRef refs/notes/other && git notes add -f -m"replacement note 3" HEAD^ && + test_config notes.rewriteMode overwrite && + test_config notes.rewriteRef refs/notes/other && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | GIT_NOTES_REWRITE_REF= git notes copy --for-rewrite=foo && - git log -1 > output && - test_cmp expect output + git log -1 >actual && + test_cmp expect actual ' test_expect_success 'git notes copy diagnoses too many or too few parameters' ' @@ -1221,13 +1123,13 @@ test_expect_success 'git notes copy diagnoses too many or too few parameters' ' ' test_expect_success 'git notes get-ref (no overrides)' ' - git config --unset core.notesRef && + test_unconfig core.notesRef && sane_unset GIT_NOTES_REF && test "$(git notes get-ref)" = "refs/notes/commits" ' test_expect_success 'git notes get-ref (core.notesRef)' ' - git config core.notesRef refs/notes/foo && + test_config core.notesRef refs/notes/foo && test "$(git notes get-ref)" = "refs/notes/foo" ' @@ -1239,4 +1141,51 @@ test_expect_success 'git notes get-ref (--ref)' ' test "$(GIT_NOTES_REF=refs/notes/bar git notes --ref=baz get-ref)" = "refs/notes/baz" ' +test_expect_success 'setup testing of empty notes' ' + test_unconfig core.notesRef && + test_commit 16th && + empty_blob=$(git hash-object -w /dev/null) && + echo "$empty_blob" >expect_empty +' + +while read cmd +do + test_expect_success "'git notes $cmd' removes empty note" " + test_might_fail git notes remove HEAD && + MSG= git notes $cmd && + test_must_fail git notes list HEAD + " + + test_expect_success "'git notes $cmd --allow-empty' stores empty note" " + test_might_fail git notes remove HEAD && + MSG= git notes $cmd --allow-empty && + git notes list HEAD >actual && + test_cmp expect_empty actual + " +done <<\EOF +add +add -F /dev/null +add -m "" +add -c "$empty_blob" +add -C "$empty_blob" +append +append -F /dev/null +append -m "" +append -c "$empty_blob" +append -C "$empty_blob" +edit +EOF + +test_expect_success 'empty notes are displayed by git log' ' + test_commit 17th && + git log -1 >expect && + cat >>expect <<-EOF && + + Notes: + EOF + git notes add -C "$empty_blob" --allow-empty && + git log -1 >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3302-notes-index-expensive.sh b/t/t3302-notes-index-expensive.sh index e35d7811ac..7217c5e222 100755 --- a/t/t3302-notes-index-expensive.sh +++ b/t/t3302-notes-index-expensive.sh @@ -7,53 +7,49 @@ test_description='Test commit notes index (expensive!)' . ./test-lib.sh -test_set_prereq NOT_EXPENSIVE -test -n "$GIT_NOTES_TIMING_TESTS" && test_set_prereq EXPENSIVE -test -x /usr/bin/time && test_set_prereq USR_BIN_TIME - create_repo () { number_of_commits=$1 nr=0 test -d .git || { git init && ( - while [ $nr -lt $number_of_commits ]; do + while test $nr -lt $number_of_commits + do nr=$(($nr+1)) mark=$(($nr+$nr)) notemark=$(($mark+1)) test_tick && - cat <<INPUT_END && -commit refs/heads/master -mark :$mark -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -commit #$nr -COMMIT - -M 644 inline file -data <<EOF -file in commit #$nr -EOF - -blob -mark :$notemark -data <<EOF -note for commit #$nr -EOF - -INPUT_END - - echo "N :$notemark :$mark" >> note_commit + cat <<-INPUT_END && + commit refs/heads/master + mark :$mark + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + commit #$nr + COMMIT + + M 644 inline file + data <<EOF + file in commit #$nr + EOF + + blob + mark :$notemark + data <<EOF + note for commit #$nr + EOF + + INPUT_END + echo "N :$notemark :$mark" >>note_commit done && test_tick && - cat <<INPUT_END && -commit refs/notes/commits -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -notes -COMMIT + cat <<-INPUT_END && + commit refs/notes/commits + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + notes + COMMIT -INPUT_END + INPUT_END cat note_commit ) | @@ -65,62 +61,74 @@ INPUT_END test_notes () { count=$1 && git config core.notesRef refs/notes/commits && - git log | grep "^ " > output && + git log | grep "^ " >output && i=$count && - while [ $i -gt 0 ]; do + while test $i -gt 0 + do echo " commit #$i" && echo " note for commit #$i" && - i=$(($i-1)); - done > expect && + i=$(($i-1)) + done >expect && test_cmp expect output } -cat > time_notes << \EOF +write_script time_notes <<\EOF mode=$1 i=1 - while [ $i -lt $2 ]; do + while test $i -lt $2 + do case $1 in no-notes) - GIT_NOTES_REF=non-existing; export GIT_NOTES_REF - ;; + GIT_NOTES_REF=non-existing + export GIT_NOTES_REF + ;; notes) unset GIT_NOTES_REF - ;; + ;; esac - git log >/dev/null + git log i=$(($i+1)) - done + done >/dev/null EOF time_notes () { for mode in no-notes notes do echo $mode - /usr/bin/time "$SHELL_PATH" ../time_notes $mode $1 + /usr/bin/time ../time_notes $mode $1 done } do_tests () { - pr=$1 - count=$2 - - test_expect_success $pr 'setup / mkdir' ' - mkdir $count && - cd $count + count=$1 pr=${2-} + + test_expect_success $pr "setup $count" ' + mkdir "$count" && + ( + cd "$count" && + create_repo "$count" + ) ' - test_expect_success $pr "setup $count" "create_repo $count" - - test_expect_success $pr 'notes work' "test_notes $count" - - test_expect_success USR_BIN_TIME,$pr 'notes timing with /usr/bin/time' "time_notes 100" + test_expect_success $pr 'notes work' ' + ( + cd "$count" && + test_notes "$count" + ) + ' - test_expect_success $pr 'teardown / cd ..' 'cd ..' + test_expect_success "USR_BIN_TIME${pr:+,$pr}" 'notes timing with /usr/bin/time' ' + ( + cd "$count" && + time_notes 100 + ) + ' } -do_tests NOT_EXPENSIVE 10 -for count in 100 1000 10000; do - do_tests EXPENSIVE $count +do_tests 10 +for count in 100 1000 10000 +do + do_tests "$count" EXPENSIVE done test_done diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 80e0a951ea..47b5682662 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -169,6 +169,29 @@ test_expect_success 'default to common base in @{upstream}s reflog if no upstrea test_cmp expect actual ' +test_expect_success 'cherry-picked commits and fork-point work together' ' + git checkout default-base && + echo Amended >A && + git commit -a --no-edit --amend && + test_commit B B && + test_commit new_B B "New B" && + test_commit C C && + git checkout default && + git reset --hard default-base@{4} && + test_commit D D && + git cherry-pick -2 default-base^ && + test_commit final_B B "Final B" && + git rebase && + echo Amended >expect && + test_cmp A expect && + echo "Final B" >expect && + test_cmp B expect && + echo C >expect && + test_cmp C expect && + echo D >expect && + test_cmp D expect +' + test_expect_success 'rebase -q is quiet' ' git checkout -b quiet topic && git rebase -q master >output.out 2>&1 && diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index c0023a5b4f..a31f7e0430 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -67,6 +67,14 @@ test_expect_success 'setup' ' SHELL= export SHELL +test_expect_success 'rebase --keep-empty' ' + git checkout -b emptybranch master && + git commit --allow-empty -m "empty" && + git rebase --keep-empty -i HEAD~2 && + git log --oneline >actual && + test_line_count = 6 actual +' + test_expect_success 'rebase -i with the exec command' ' git checkout master && ( @@ -1031,4 +1039,11 @@ test_expect_success 'short SHA-1 collide' ' ) ' +test_expect_success 'respect core.abbrev' ' + git config core.abbrev 12 && + set_cat_todo_editor && + test_must_fail git rebase -i HEAD~4 >todo-list && + test 4 = $(grep -c "pick [0-9a-f]\{12,\}" todo-list) +' + test_done diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh index e70ac10a0c..217dd79b2e 100755 --- a/t/t3419-rebase-patch-id.sh +++ b/t/t3419-rebase-patch-id.sh @@ -4,12 +4,7 @@ test_description='git rebase - test patch id computation' . ./test-lib.sh -test_set_prereq NOT_EXPENSIVE -test -n "$GIT_PATCHID_TIMING_TESTS" && test_set_prereq EXPENSIVE -test -x /usr/bin/time && test_set_prereq USR_BIN_TIME - -count() -{ +count () { i=0 while test $i -lt $1 do @@ -18,8 +13,7 @@ count() done } -scramble() -{ +scramble () { i=0 while read x do @@ -28,12 +22,11 @@ scramble() echo "$x" fi i=$((($i+1) % 10)) - done < "$1" > "$1.new" + done <"$1" >"$1.new" mv -f "$1.new" "$1" } -run() -{ +run () { echo \$ "$@" /usr/bin/time "$@" >/dev/null } @@ -43,10 +36,8 @@ test_expect_success 'setup' ' git tag root ' -do_tests() -{ - pr=$1 - nlines=$2 +do_tests () { + nlines=$1 pr=${2-} test_expect_success $pr "setup: $nlines lines" " rm -f .gitattributes && @@ -103,7 +94,7 @@ do_tests() " } -do_tests NOT_EXPENSIVE 500 -do_tests EXPENSIVE 50000 +do_tests 500 +do_tests 50000 EXPENSIVE test_done diff --git a/t/t3426-rebase-submodule.sh b/t/t3426-rebase-submodule.sh new file mode 100755 index 0000000000..d5b896d445 --- /dev/null +++ b/t/t3426-rebase-submodule.sh @@ -0,0 +1,46 @@ +#!/bin/sh + +test_description='rebase can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + +git_rebase () { + git status -su >expect && + ls -1pR * >>expect && + git checkout -b ours HEAD && + echo x >>file1 && + git add file1 && + git commit -m add_x && + git revert HEAD && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + git rebase "$1" +} + +test_submodule_switch "git_rebase" + +git_rebase_interactive () { + git status -su >expect && + ls -1pR * >>expect && + git checkout -b ours HEAD && + echo x >>file1 && + git add file1 && + git commit -m add_x && + git revert HEAD && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + set_fake_editor && + echo "fake-editor.sh" >.git/info/exclude && + git rebase -i "$1" +} + +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +# The real reason "replace directory with submodule" fails is because a +# directory "sub1" exists, but we reuse the suppression added for merge here +test_submodule_switch "git_rebase_interactive" + +test_done diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh index 223b98433c..7c5ad08626 100755 --- a/t/t3507-cherry-pick-conflict.sh +++ b/t/t3507-cherry-pick-conflict.sh @@ -351,19 +351,45 @@ test_expect_success 'commit after failed cherry-pick does not add duplicated -s' test_expect_success 'commit after failed cherry-pick adds -s at the right place' ' pristine_detach initial && test_must_fail git cherry-pick picked && + git commit -a -s && - pwd && - cat <<EOF > expected && -picked -Signed-off-by: C O Mitter <committer@example.com> + # Do S-o-b and Conflicts appear in the right order? + cat <<-\EOF >expect && + Signed-off-by: C O Mitter <committer@example.com> + # Conflicts: + EOF + grep -e "^# Conflicts:" -e '^Signed-off-by' <.git/COMMIT_EDITMSG >actual && + test_cmp expect actual && + + cat <<-\EOF >expected && + picked -Conflicts: - foo -EOF + Signed-off-by: C O Mitter <committer@example.com> + EOF - git show -s --pretty=format:%B > actual && + git show -s --pretty=format:%B >actual && test_cmp expected actual ' +test_expect_success 'commit --amend -s places the sign-off at the right place' ' + pristine_detach initial && + test_must_fail git cherry-pick picked && + + # emulate old-style conflicts block + mv .git/MERGE_MSG .git/MERGE_MSG+ && + sed -e "/^# Conflicts:/,\$s/^# *//" <.git/MERGE_MSG+ >.git/MERGE_MSG && + + git commit -a && + git commit --amend -s && + + # Do S-o-b and Conflicts appear in the right order? + cat <<-\EOF >expect && + Signed-off-by: C O Mitter <committer@example.com> + Conflicts: + EOF + grep -e "^Conflicts:" -e '^Signed-off-by' <.git/COMMIT_EDITMSG >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3508-cherry-pick-many-commits.sh b/t/t3508-cherry-pick-many-commits.sh index 19c99d7ef1..b457333e18 100755 --- a/t/t3508-cherry-pick-many-commits.sh +++ b/t/t3508-cherry-pick-many-commits.sh @@ -65,12 +65,15 @@ test_expect_success 'output to keep user entertained during multi-pick' ' cat <<-\EOF >expected && [master OBJID] second Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:14:13 2005 -0700 1 file changed, 1 insertion(+) [master OBJID] third Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 1 file changed, 1 insertion(+) [master OBJID] fourth Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 1 file changed, 1 insertion(+) EOF @@ -98,14 +101,17 @@ test_expect_success 'output during multi-pick indicates merge strategy' ' Trying simple merge. [master OBJID] second Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:14:13 2005 -0700 1 file changed, 1 insertion(+) Trying simple merge. [master OBJID] third Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 1 file changed, 1 insertion(+) Trying simple merge. [master OBJID] fourth Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 1 file changed, 1 insertion(+) EOF diff --git a/t/t3512-cherry-pick-submodule.sh b/t/t3512-cherry-pick-submodule.sh new file mode 100755 index 0000000000..6863b7bb6f --- /dev/null +++ b/t/t3512-cherry-pick-submodule.sh @@ -0,0 +1,13 @@ +#!/bin/sh + +test_description='cherry-pick can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 +test_submodule_switch "git cherry-pick" + +test_done diff --git a/t/t3513-revert-submodule.sh b/t/t3513-revert-submodule.sh new file mode 100755 index 0000000000..a1c4e0216f --- /dev/null +++ b/t/t3513-revert-submodule.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +test_description='revert can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +# Create a revert that moves from HEAD (including any test modifications to +# the work tree) to $1 by first checking out $1 and reverting it. Reverting +# the revert is the transition we test for. We tar the current work tree +# first so we can restore the work tree test setup after doing the checkout +# and revert. We test here that the restored work tree content is identical +# to that at the beginning. The last revert is then tested by the framework. +git_revert () { + git status -su >expect && + ls -1pR * >>expect && + tar czf "$TRASH_DIRECTORY/tmp.tgz" * && + git checkout "$1" && + git revert HEAD && + rm -rf * && + tar xzf "$TRASH_DIRECTORY/tmp.tgz" && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + git revert HEAD +} + +KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +test_submodule_switch "git_revert" + +test_done diff --git a/t/t3700-add.sh b/t/t3700-add.sh index fe274e2fb1..f7ff1f555d 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -91,6 +91,13 @@ test_expect_success 'error out when attempting to add ignored ones without -f' ' ! (git ls-files | grep "\\.ig") ' +test_expect_success 'error out when attempting to add ignored ones but add others' ' + touch a.if && + test_must_fail git add a.?? && + ! (git ls-files | grep "\\.ig") && + (git ls-files | grep a.if) +' + test_expect_success 'add ignored ones with -f' ' git add -f a.?? && git ls-files --error-unmatch a.ig @@ -311,7 +318,6 @@ cat >expect.err <<\EOF The following paths are ignored by one of your .gitignore files: ignored-file Use -f if you really want to add them. -fatal: no files added EOF cat >expect.out <<\EOF add 'track-this' diff --git a/t/t3901-i18n-patch.sh b/t/t3901-i18n-patch.sh index 31a5770b34..a392f3d1d6 100755 --- a/t/t3901-i18n-patch.sh +++ b/t/t3901-i18n-patch.sh @@ -54,10 +54,13 @@ test_expect_success setup ' git add yours && git commit -s -m "Second on side" && - # the second one on the side branch is ISO-8859-1 - git config i18n.commitencoding ISO8859-1 && - # use author and committer name in ISO-8859-1 to match it. - . "$TEST_DIRECTORY"/t3901-8859-1.txt && + if test_have_prereq !MINGW + then + # the second one on the side branch is ISO-8859-1 + git config i18n.commitencoding ISO8859-1 && + # use author and committer name in ISO-8859-1 to match it. + . "$TEST_DIRECTORY"/t3901-8859-1.txt + fi && test_tick && echo Yet another >theirs && git add theirs && @@ -119,7 +122,7 @@ test_expect_success 'rebase (U/L)' ' check_encoding 2 ' -test_expect_success 'rebase (L/L)' ' +test_expect_success !MINGW 'rebase (L/L)' ' # In this test we want ISO-8859-1 encoded commits as the result git config i18n.commitencoding ISO8859-1 && git config i18n.logoutputencoding ISO8859-1 && @@ -131,7 +134,7 @@ test_expect_success 'rebase (L/L)' ' check_encoding 2 8859 ' -test_expect_success 'rebase (L/U)' ' +test_expect_success !MINGW 'rebase (L/U)' ' # This is pathological -- use UTF-8 as intermediate form # to get ISO-8859-1 results. git config i18n.commitencoding ISO8859-1 && @@ -159,7 +162,7 @@ test_expect_success 'cherry-pick(U/U)' ' check_encoding 3 ' -test_expect_success 'cherry-pick(L/L)' ' +test_expect_success !MINGW 'cherry-pick(L/L)' ' # Both the commitencoding and logoutputencoding is set to ISO-8859-1 git config i18n.commitencoding ISO8859-1 && @@ -189,7 +192,7 @@ test_expect_success 'cherry-pick(U/L)' ' check_encoding 3 ' -test_expect_success 'cherry-pick(L/U)' ' +test_expect_success !MINGW 'cherry-pick(L/U)' ' # Again, the commitencoding is set to ISO-8859-1 but # logoutputencoding is set to UTF-8. diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 5b79b216e2..1e29962fad 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -685,4 +685,46 @@ test_expect_success 'handle stash specification with spaces' ' grep pig file ' +test_expect_success 'setup stash with index and worktree changes' ' + git stash clear && + git reset --hard && + echo index >file && + git add file && + echo working >file && + git stash +' + +test_expect_success 'stash list implies --first-parent -m' ' + cat >expect <<-\EOF && + stash@{0}: WIP on master: b27a2bc subdir + + diff --git a/file b/file + index 257cc56..d26b33d 100644 + --- a/file + +++ b/file + @@ -1 +1 @@ + -foo + +working + EOF + git stash list -p >actual && + test_cmp expect actual +' + +test_expect_success 'stash list --cc shows combined diff' ' + cat >expect <<-\EOF && + stash@{0}: WIP on master: b27a2bc subdir + + diff --cc file + index 257cc56,9015a7a..d26b33d + --- a/file + +++ b/file + @@@ -1,1 -1,1 +1,1 @@@ + - foo + -index + ++working + EOF + git stash list -p --cc >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index a5e7e6b2ba..f372fc8ca8 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -96,8 +96,8 @@ test_expect_success 'stash pop after save --include-untracked leaves files untra git stash pop && git status --porcelain >actual && test_cmp expect actual && - test "1" = "`cat file2`" && - test untracked = "`cat untracked/untracked`" + test "1" = "$(cat file2)" && + test untracked = "$(cat untracked/untracked)" ' git clean --force --quiet -d diff --git a/t/t3906-stash-submodule.sh b/t/t3906-stash-submodule.sh new file mode 100755 index 0000000000..d7219d6f8f --- /dev/null +++ b/t/t3906-stash-submodule.sh @@ -0,0 +1,24 @@ +#!/bin/sh + +test_description='stash apply can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +git_stash () { + git status -su >expect && + ls -1pR * >>expect && + git read-tree -u -m "$1" && + git stash && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + git stash apply +} + +KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES=1 +KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +test_submodule_switch "git_stash" + +test_done diff --git a/t/t3910-mac-os-precompose.sh b/t/t3910-mac-os-precompose.sh index e4ba6013e4..831935665e 100755 --- a/t/t3910-mac-os-precompose.sh +++ b/t/t3910-mac-os-precompose.sh @@ -14,13 +14,13 @@ then fi # create utf-8 variables -Adiarnfc=`printf '\303\204'` -Adiarnfd=`printf 'A\314\210'` +Adiarnfc=$(printf '\303\204') +Adiarnfd=$(printf 'A\314\210') -Odiarnfc=`printf '\303\226'` -Odiarnfd=`printf 'O\314\210'` -AEligatu=`printf '\303\206'` -Invalidu=`printf '\303\377'` +Odiarnfc=$(printf '\303\226') +Odiarnfd=$(printf 'O\314\210') +AEligatu=$(printf '\303\206') +Invalidu=$(printf '\303\377') #Create a string with 255 bytes (decomposed) @@ -35,7 +35,7 @@ Alongc=$Alongc$Alongc$Alongc$Alongc$Alongc #250 Byte Alongc=$Alongc$AEligatu$AEligatu #254 Byte test_expect_success "detect if nfd needed" ' - precomposeunicode=`git config core.precomposeunicode` && + precomposeunicode=$(git config core.precomposeunicode) && test "$precomposeunicode" = true && git config core.precomposeunicode true ' @@ -140,13 +140,23 @@ test_expect_success "Add long precomposed filename" ' git add * && git commit -m "Long filename" ' + +test_expect_failure 'handle existing decomposed filenames' ' + echo content >"verbatim.$Adiarnfd" && + git -c core.precomposeunicode=false add "verbatim.$Adiarnfd" && + git commit -m "existing decomposed file" && + >expect && + git ls-files --exclude-standard -o "verbatim*" >untracked && + test_cmp expect untracked +' + # Test if the global core.precomposeunicode stops autosensing # Must be the last test case test_expect_success "respect git config --global core.precomposeunicode" ' git config --global core.precomposeunicode true && rm -rf .git && git init && - precomposeunicode=`git config core.precomposeunicode` && + precomposeunicode=$(git config core.precomposeunicode) && test "$precomposeunicode" = "true" ' diff --git a/t/t4006-diff-mode.sh b/t/t4006-diff-mode.sh index 05911492ca..76f643b2c2 100755 --- a/t/t4006-diff-mode.sh +++ b/t/t4006-diff-mode.sh @@ -13,7 +13,7 @@ sed_script='s/\(:100644 100755\) \('"$_x40"'\) \2 /\1 X X /' test_expect_success 'setup' ' echo frotz >rezrov && git update-index --add rezrov && - tree=`git write-tree` && + tree=$(git write-tree) && echo $tree ' diff --git a/t/t4008-diff-break-rewrite.sh b/t/t4008-diff-break-rewrite.sh index 27e98a8f9d..8920464896 100755 --- a/t/t4008-diff-break-rewrite.sh +++ b/t/t4008-diff-break-rewrite.sh @@ -123,10 +123,10 @@ test_expect_success \ 'git diff-index -B -M "$tree" >current' # file0 changed from regular to symlink. file1 is very close to the preimage of file0. -# because we break file0, file1 can become a rename of it. +# the change does not make file0 disappear, so file1 is denoted as a copy of file0 cat >expected <<\EOF :100644 120000 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 67be421f88824578857624f7b3dc75e99a8a1481 T file0 -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 R file0 file1 +:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 f5deac7be59e7eeab8657fd9ae706fd6a57daed2 C file0 file1 EOF test_expect_success \ diff --git a/t/t4010-diff-pathspec.sh b/t/t4010-diff-pathspec.sh index 2bb973655b..bf07841866 100755 --- a/t/t4010-diff-pathspec.sh +++ b/t/t4010-diff-pathspec.sh @@ -18,7 +18,7 @@ test_expect_success \ mkdir path1 && echo rezrov >path1/file1 && git update-index --add file0 path1/file1 && - tree=`git write-tree` && + tree=$(git write-tree) && echo "$tree" && echo nitfol >file0 && echo yomin >path1/file1 && @@ -131,7 +131,7 @@ test_expect_success 'diff multiple wildcard pathspecs' ' mkdir path2 && echo rezrov >path2/file1 && git update-index --add path2/file1 && - tree3=`git write-tree` && + tree3=$(git write-tree) && git diff --name-only $tree $tree3 -- "path2*1" "path1*1" >actual && cat <<-\EOF >expect && path1/file1 diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh index 1215ae544b..643d729157 100755 --- a/t/t4012-diff-binary.sh +++ b/t/t4012-diff-binary.sh @@ -67,18 +67,18 @@ test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' git diff >output && sed -e "s/-CIT/xCIT/" <output >broken && test_must_fail git apply --stat --summary broken 2>detected && - detected=`cat detected` && - detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && - detected=`sed -ne "${detected}p" broken` && + detected=$(cat detected) && + detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' git diff --binary | sed -e "s/-CIT/xCIT/" >broken && test_must_fail git apply --stat --summary broken 2>detected && - detected=`cat detected` && - detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && - detected=`sed -ne "${detected}p" broken` && + detected=$(cat detected) && + detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' @@ -88,7 +88,7 @@ test_expect_success 'initial commit' 'git commit -a -m initial' test_expect_success 'diff-index with --binary' ' echo AIT >a && mv b e && echo CIT >c && cat e >d && git update-index --add --remove a b c d e && - tree0=`git write-tree` && + tree0=$(git write-tree) && git diff --cached --binary >current && git apply --stat --summary current ' @@ -96,7 +96,7 @@ test_expect_success 'diff-index with --binary' ' test_expect_success 'apply binary patch' ' git reset --hard && git apply --binary --index <current && - tree1=`git write-tree` && + tree1=$(git write-tree) && test "$tree1" = "$tree0" ' diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index f7a9af893b..6ec6072118 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -107,14 +107,14 @@ test_expect_success setup ' +*++ [initial] Initial EOF -V=`git version | sed -e 's/^git version //' -e 's/\./\\./g'` +V=$(git version | sed -e 's/^git version //' -e 's/\./\\./g') while read cmd do case "$cmd" in '' | '#'*) continue ;; esac - test=`echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g'` - pfx=`printf "%04d" $test_count` + test=$(echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g') + pfx=$(printf "%04d" $test_count) expect="$TEST_DIRECTORY/t4013/diff.$test" actual="$pfx-diff.$test" diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 9c80633146..256affce89 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -43,7 +43,7 @@ test_expect_success setup ' test_expect_success "format-patch --ignore-if-in-upstream" ' git format-patch --stdout master..side >patch0 && - cnt=`grep "^From " patch0 | wc -l` && + cnt=$(grep "^From " patch0 | wc -l) && test $cnt = 3 ' @@ -52,7 +52,7 @@ test_expect_success "format-patch --ignore-if-in-upstream" ' git format-patch --stdout \ --ignore-if-in-upstream master..side >patch1 && - cnt=`grep "^From " patch1 | wc -l` && + cnt=$(grep "^From " patch1 | wc -l) && test $cnt = 2 ' @@ -69,7 +69,7 @@ test_expect_success "format-patch doesn't consider merge commits" ' git checkout -b merger master && test_tick && git merge --no-ff slave && - cnt=`git format-patch -3 --stdout | grep "^From " | wc -l` && + cnt=$(git format-patch -3 --stdout | grep "^From " | wc -l) && test $cnt = 3 ' @@ -77,7 +77,7 @@ test_expect_success "format-patch result applies" ' git checkout -b rebuild-0 master && git am -3 patch0 && - cnt=`git rev-list master.. | wc -l` && + cnt=$(git rev-list master.. | wc -l) && test $cnt = 2 ' @@ -85,7 +85,7 @@ test_expect_success "format-patch --ignore-if-in-upstream result applies" ' git checkout -b rebuild-1 master && git am -3 patch1 && - cnt=`git rev-list master.. | wc -l` && + cnt=$(git rev-list master.. | wc -l) && test $cnt = 2 ' @@ -762,6 +762,67 @@ test_expect_success 'format-patch --signature="" suppresses signatures' ' ! grep "^-- \$" output ' +test_expect_success 'prepare mail-signature input' ' + cat >mail-signature <<-\EOF + + Test User <test.email@kernel.org> + http://git.kernel.org/cgit/git/git.git + + git.kernel.org/?p=git/git.git;a=summary + + EOF +' + +test_expect_success '--signature-file=file works' ' + git format-patch --stdout --signature-file=mail-signature -1 >output && + check_patch output && + sed -e "1,/^-- \$/d" <output >actual && + { + cat mail-signature && echo + } >expect && + test_cmp expect actual +' + +test_expect_success 'format.signaturefile works' ' + test_config format.signaturefile mail-signature && + git format-patch --stdout -1 >output && + check_patch output && + sed -e "1,/^-- \$/d" <output >actual && + { + cat mail-signature && echo + } >expect && + test_cmp expect actual +' + +test_expect_success '--no-signature suppresses format.signaturefile ' ' + test_config format.signaturefile mail-signature && + git format-patch --stdout --no-signature -1 >output && + check_patch output && + ! grep "^-- \$" output +' + +test_expect_success '--signature-file overrides format.signaturefile' ' + cat >other-mail-signature <<-\EOF + Use this other signature instead of mail-signature. + EOF + test_config format.signaturefile mail-signature && + git format-patch --stdout \ + --signature-file=other-mail-signature -1 >output && + check_patch output && + sed -e "1,/^-- \$/d" <output >actual && + { + cat other-mail-signature && echo + } >expect && + test_cmp expect actual +' + +test_expect_success '--signature overrides format.signaturefile' ' + test_config format.signaturefile mail-signature && + git format-patch --stdout --signature="my sig" -1 >output && + check_patch output && + grep "my sig" output +' + test_expect_success TTY 'format-patch --stdout paginates' ' rm -f pager_used && test_terminal env GIT_PAGER="wc >pager_used" git format-patch --stdout --all && diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index 34591c23da..1dbaa3864a 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -52,15 +52,15 @@ do echo "*.java diff=$p" >.gitattributes && test_expect_code 1 git diff --no-index \ A.java B.java 2>msg && - ! test_i18ngrep fatal msg && - ! test_i18ngrep error msg + test_i18ngrep ! fatal msg && + test_i18ngrep ! error msg ' test_expect_success "builtin $p wordRegex pattern compiles" ' echo "*.java diff=$p" >.gitattributes && test_expect_code 1 git diff --no-index --word-diff \ A.java B.java 2>msg && - ! test_i18ngrep fatal msg && - ! test_i18ngrep error msg + test_i18ngrep ! fatal msg && + test_i18ngrep ! error msg ' done diff --git a/t/t4023-diff-rename-typechange.sh b/t/t4023-diff-rename-typechange.sh index 55d549fcf4..8c9823765e 100755 --- a/t/t4023-diff-rename-typechange.sh +++ b/t/t4023-diff-rename-typechange.sh @@ -76,7 +76,8 @@ test_expect_success 'moves and renames' ' git diff-tree three four -r --name-status -B -M | sort >actual && { - echo "R100 foo bar" + # see -B -M (#6) in t4008 + echo "C100 foo bar" echo "T100 foo" } | sort >expect && test_cmp expect actual diff --git a/t/t4026-color.sh b/t/t4026-color.sh index 3726a0e201..4d20feacfe 100755 --- a/t/t4026-color.sh +++ b/t/t4026-color.sh @@ -45,14 +45,41 @@ test_expect_success 'fg bg attr...' ' color "blue bold dim ul blink reverse" "[1;2;4;5;7;34m" ' +# note that nobold and nodim are the same code (22) +test_expect_success 'attr negation' ' + color "nobold nodim noul noblink noreverse" "[22;24;25;27m" +' + test_expect_success 'long color specification' ' color "254 255 bold dim ul blink reverse" "[1;2;4;5;7;38;5;254;48;5;255m" ' +test_expect_success 'absurdly long color specification' ' + color \ + "#ffffff #ffffff bold nobold dim nodim ul noul blink noblink reverse noreverse" \ + "[1;2;4;5;7;22;24;25;27;38;2;255;255;255;48;2;255;255;255m" +' + +test_expect_success '0-7 are aliases for basic ANSI color names' ' + color "0 7" "[30;47m" +' + test_expect_success '256 colors' ' color "254 bold 255" "[1;38;5;254;48;5;255m" ' +test_expect_success '24-bit colors' ' + color "#ff00ff black" "[38;2;255;0;255;40m" +' + +test_expect_success '"normal" yields no color at all"' ' + color "normal black" "[40m" +' + +test_expect_success '-1 is a synonym for "normal"' ' + color "-1 black" "[40m" +' + test_expect_success 'color too small' ' invalid_color "-2" ' diff --git a/t/t4036-format-patch-signer-mime.sh b/t/t4036-format-patch-signer-mime.sh index ba43f18549..98d9713d8b 100755 --- a/t/t4036-format-patch-signer-mime.sh +++ b/t/t4036-format-patch-signer-mime.sh @@ -42,7 +42,7 @@ test_expect_success 'attach and signoff do not duplicate mime headers' ' GIT_COMMITTER_NAME="はまの ふにおう" \ git format-patch -s --stdout -1 --attach >output && - test `grep -ci ^MIME-Version: output` = 1 + test $(grep -ci ^MIME-Version: output) = 1 ' diff --git a/t/t4038-diff-combined.sh b/t/t4038-diff-combined.sh index 1019d7b35f..0b4f7dfdc6 100755 --- a/t/t4038-diff-combined.sh +++ b/t/t4038-diff-combined.sh @@ -94,7 +94,7 @@ test_expect_success 'setup for --cc --raw' ' blob=$(echo file | git hash-object --stdin -w) && base_tree=$(echo "100644 blob $blob file" | git mktree) && trees= && - for i in `test_seq 1 40` + for i in $(test_seq 1 40) do blob=$(echo file$i | git hash-object --stdin -w) && trees="$trees$(echo "100644 blob $blob file" | git mktree)$LF" @@ -401,4 +401,38 @@ test_expect_success 'combine diff missing delete bug' ' compare_diff_patch expected actual ' +test_expect_success 'combine diff gets tree sorting right' ' + # create a directory and a file that sort differently in trees + # versus byte-wise (implied "/" sorts after ".") + git checkout -f master && + mkdir foo && + echo base >foo/one && + echo base >foo/two && + echo base >foo.ext && + git add foo foo.ext && + git commit -m base && + + # one side modifies a file in the directory, along with the root + # file... + echo master >foo/one && + echo master >foo.ext && + git commit -a -m master && + + # the other side modifies the other file in the directory + git checkout -b other HEAD^ && + echo other >foo/two && + git commit -a -m other && + + # And now we merge. The files in the subdirectory will resolve cleanly, + # meaning that a combined diff will not find them interesting. But it + # will find the tree itself interesting, because it had to be merged. + git checkout master && + git merge other && + + printf "MM\tfoo\n" >expect && + git diff-tree -c --name-status -t HEAD >actual.tmp && + sed 1d <actual.tmp >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4041-diff-submodule-option.sh b/t/t4041-diff-submodule-option.sh index 463d63bde0..e4328964a7 100755 --- a/t/t4041-diff-submodule-option.sh +++ b/t/t4041-diff-submodule-option.sh @@ -26,8 +26,10 @@ add_file () { echo "$name" >"$name" && git add "$name" && test_tick && - msg_added_iso88591=$(echo "Add $name ($added $name)" | iconv -f utf-8 -t $test_encoding) && - git -c "i18n.commitEncoding=$test_encoding" commit -m "$msg_added_iso88591" + # "git commit -m" would break MinGW, as Windows refuse to pass + # $test_encoding encoded parameter to git. + echo "Add $name ($added $name)" | iconv -f utf-8 -t $test_encoding | + git -c "i18n.commitEncoding=$test_encoding" commit -F - done >/dev/null && git rev-parse --short --verify HEAD ) diff --git a/t/t4055-diff-context.sh b/t/t4055-diff-context.sh index cd0454356a..741e0803c1 100755 --- a/t/t4055-diff-context.sh +++ b/t/t4055-diff-context.sh @@ -79,7 +79,7 @@ test_expect_success 'non-integer config parsing' ' test_expect_success 'negative integer config parsing' ' git config diff.context -1 && test_must_fail git diff 2>output && - test_i18ngrep "bad config file" output + test_i18ngrep "bad config variable" output ' test_expect_success '-U0 is valid, so is diff.context=0' ' diff --git a/t/t4057-diff-combined-paths.sh b/t/t4057-diff-combined-paths.sh index 097e63215e..dff36b77ec 100755 --- a/t/t4057-diff-combined-paths.sh +++ b/t/t4057-diff-combined-paths.sh @@ -5,7 +5,7 @@ test_description='combined diff show only paths that are different to all parent . ./test-lib.sh # verify that diffc.expect matches output of -# `git diff -c --name-only HEAD HEAD^ HEAD^2` +# $(git diff -c --name-only HEAD HEAD^ HEAD^2) diffc_verify () { git diff -c --name-only HEAD HEAD^ HEAD^2 >diffc.actual && test_cmp diffc.expect diffc.actual diff --git a/t/t4102-apply-rename.sh b/t/t4102-apply-rename.sh index 49e2d6c349..fae305979a 100755 --- a/t/t4102-apply-rename.sh +++ b/t/t4102-apply-rename.sh @@ -52,6 +52,6 @@ EOF test_expect_success 'apply copy' \ 'git apply --index --stat --summary --apply test-patch && - test "$(cat bar)" = "This is bar" -a "$(cat foo)" = "This is foo"' + test "$(cat bar)" = "This is bar" && test "$(cat foo)" = "This is foo"' test_done diff --git a/t/t4116-apply-reverse.sh b/t/t4116-apply-reverse.sh index 1e4d4380bf..ce8567f496 100755 --- a/t/t4116-apply-reverse.sh +++ b/t/t4116-apply-reverse.sh @@ -30,10 +30,10 @@ test_expect_success setup ' test_expect_success 'apply in forward' ' - T0=`git rev-parse "second^{tree}"` && + T0=$(git rev-parse "second^{tree}") && git reset --hard initial && git apply --index --binary patch && - T1=`git write-tree` && + T1=$(git write-tree) && test "$T0" = "$T1" ' @@ -62,22 +62,22 @@ test_expect_success 'setup separate repository lacking postimage' ' test_expect_success 'apply in forward without postimage' ' - T0=`git rev-parse "second^{tree}"` && + T0=$(git rev-parse "second^{tree}") && ( cd initial && git apply --index --binary ../patch && - T1=`git write-tree` && + T1=$(git write-tree) && test "$T0" = "$T1" ) ' test_expect_success 'apply in reverse without postimage' ' - T0=`git rev-parse "initial^{tree}"` && + T0=$(git rev-parse "initial^{tree}") && ( cd second && git apply --index --binary --reverse ../patch && - T1=`git write-tree` && + T1=$(git write-tree) && test "$T0" = "$T1" ) ' diff --git a/t/t4119-apply-config.sh b/t/t4119-apply-config.sh index 3d0384daa8..a9a0583811 100755 --- a/t/t4119-apply-config.sh +++ b/t/t4119-apply-config.sh @@ -68,7 +68,7 @@ test_expect_success 'apply --whitespace=strip from config' ' check_result sub/file1 ' -D=`pwd` +D=$(pwd) test_expect_success 'apply --whitespace=strip in subdir' ' @@ -159,4 +159,21 @@ test_expect_success 'same but with traditional patch input of depth 2' ' check_result sub/file1 ' +test_expect_success 'in subdir with traditional patch input' ' + cd "$D" && + git config apply.whitespace strip && + cat >.gitattributes <<-EOF && + /* whitespace=blank-at-eol + sub/* whitespace=-blank-at-eol + EOF + rm -f sub/file1 && + cp saved sub/file1 && + git update-index --refresh && + + cd sub && + git apply ../gpatch.file && + echo "B " >expect && + test_cmp expect file1 +' + test_done diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index 5d0c598338..c6474de4c8 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -512,4 +512,15 @@ test_expect_success 'whitespace=fix to expand' ' git -c core.whitespace=tab-in-indent apply --whitespace=fix patch ' +test_expect_success 'whitespace check skipped for excluded paths' ' + git config core.whitespace blank-at-eol && + >used && + >unused && + git add used unused && + echo "used" >used && + echo "unused " >unused && + git diff-files -p used unused >patch && + git apply --include=used --stat --whitespace=error <patch +' + test_done diff --git a/t/t4137-apply-submodule.sh b/t/t4137-apply-submodule.sh new file mode 100755 index 0000000000..a9bd40a6d0 --- /dev/null +++ b/t/t4137-apply-submodule.sh @@ -0,0 +1,20 @@ +#!/bin/sh + +test_description='git apply handling submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +apply_index () { + git diff --ignore-submodules=dirty "..$1" | git apply --index - +} + +test_submodule_switch "apply_index" + +apply_3way () { + git diff --ignore-submodules=dirty "..$1" | git apply --3way - +} + +test_submodule_switch "apply_3way" + +test_done diff --git a/t/t4138-apply-ws-expansion.sh b/t/t4138-apply-ws-expansion.sh new file mode 100755 index 0000000000..0ffe33fbef --- /dev/null +++ b/t/t4138-apply-ws-expansion.sh @@ -0,0 +1,121 @@ +#!/bin/sh +# +# Copyright (C) 2015 Kyle J. McKay +# + +test_description='git apply test patches with whitespace expansion.' + +. ./test-lib.sh + +test_expect_success setup ' + # + ## create test-N, patchN.patch, expect-N files + # + + # test 1 + printf "\t%s\n" 1 2 3 4 5 6 >before && + printf "\t%s\n" 1 2 3 >after && + printf "%64s\n" a b c >>after && + printf "\t%s\n" 4 5 6 >>after && + git diff --no-index before after | + sed -e "s/before/test-1/" -e "s/after/test-1/" >patch1.patch && + printf "%64s\n" 1 2 3 4 5 6 >test-1 && + printf "%64s\n" 1 2 3 a b c 4 5 6 >expect-1 && + + # test 2 + printf "\t%s\n" a b c d e f >before && + printf "\t%s\n" a b c >after && + n=10 && + x=1 && + while test $x -lt $n + do + printf "%63s%d\n" "" $x >>after + x=$(( $x + 1 )) + done && + printf "\t%s\n" d e f >>after && + git diff --no-index before after | + sed -e "s/before/test-2/" -e "s/after/test-2/" >patch2.patch && + printf "%64s\n" a b c d e f >test-2 && + printf "%64s\n" a b c >expect-2 && + x=1 && + while test $x -lt $n + do + printf "%63s%d\n" "" $x >>expect-2 + x=$(( $x + 1 )) + done && + printf "%64s\n" d e f >>expect-2 && + + # test 3 + printf "\t%s\n" a b c d e f >before && + printf "\t%s\n" a b c >after && + n=100 && + x=0 && + while test $x -lt $n + do + printf "%63s%02d\n" "" $x >>after + x=$(( $x + 1 )) + done && + printf "\t%s\n" d e f >>after && + git diff --no-index before after | + sed -e "s/before/test-3/" -e "s/after/test-3/" >patch3.patch && + printf "%64s\n" a b c d e f >test-3 && + printf "%64s\n" a b c >expect-3 && + x=0 && + while test $x -lt $n + do + printf "%63s%02d\n" "" $x >>expect-3 + x=$(( $x + 1 )) + done && + printf "%64s\n" d e f >>expect-3 && + + # test 4 + >before && + x=0 && + while test $x -lt 50 + do + printf "\t%02d\n" $x >>before + x=$(( $x + 1 )) + done && + cat before >after && + printf "%64s\n" a b c >>after && + while test $x -lt 100 + do + printf "\t%02d\n" $x >>before + printf "\t%02d\n" $x >>after + x=$(( $x + 1 )) + done && + git diff --no-index before after | + sed -e "s/before/test-4/" -e "s/after/test-4/" >patch4.patch && + >test-4 && + x=0 && + while test $x -lt 50 + do + printf "%63s%02d\n" "" $x >>test-4 + x=$(( $x + 1 )) + done && + cat test-4 >expect-4 && + printf "%64s\n" a b c >>expect-4 && + while test $x -lt 100 + do + printf "%63s%02d\n" "" $x >>test-4 + printf "%63s%02d\n" "" $x >>expect-4 + x=$(( $x + 1 )) + done && + + git config core.whitespace tab-in-indent,tabwidth=63 && + git config apply.whitespace fix + +' + +# Note that `patch` can successfully apply all patches when run +# with the --ignore-whitespace option. + +for t in 1 2 3 4 +do + test_expect_success 'apply with ws expansion (t=$t)' ' + git apply patch$t.patch && + test_cmp test-$t expect-$t + ' +done + +test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 5edb79a058..306e6f39ac 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -85,6 +85,7 @@ test_expect_success setup ' git format-patch --stdout first >patch1 && { + echo "Message-Id: <1226501681-24923-1-git-send-email-bda@mnsspb.ru>" && echo "X-Fake-Field: Line One" && echo "X-Fake-Field: Line Two" && echo "X-Fake-Field: Line Three" && @@ -536,4 +537,26 @@ test_expect_success 'am empty-file does not infloop' ' test_i18ncmp expected actual ' +test_expect_success 'am --message-id really adds the message id' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout HEAD^ && + git am --message-id patch1.eml && + test_path_is_missing .git/rebase-apply && + git cat-file commit HEAD | tail -n1 >actual && + grep Message-Id patch1.eml >expected && + test_cmp expected actual +' + +test_expect_success 'am --message-id -s signs off after the message id' ' + rm -fr .git/rebase-apply && + git reset --hard && + git checkout HEAD^ && + git am -s --message-id patch1.eml && + test_path_is_missing .git/rebase-apply && + git cat-file commit HEAD | tail -n2 | head -n1 >actual && + grep Message-Id patch1.eml >expected && + test_cmp expected actual +' + test_done diff --git a/t/t4201-shortlog.sh b/t/t4201-shortlog.sh index 97fcb31d6e..7600a3e3e8 100755 --- a/t/t4201-shortlog.sh +++ b/t/t4201-shortlog.sh @@ -93,7 +93,7 @@ test_expect_success 'output from user-defined format is re-wrapped' ' test_cmp expect log.predictable ' -test_expect_success 'shortlog wrapping' ' +test_expect_success !MINGW 'shortlog wrapping' ' cat >expect <<\EOF && A U Thor (5): Test @@ -114,7 +114,7 @@ EOF test_cmp expect out ' -test_expect_success 'shortlog from non-git directory' ' +test_expect_success !MINGW 'shortlog from non-git directory' ' git log HEAD >log && GIT_DIR=non-existing git shortlog -w <log >out && test_cmp expect out @@ -159,7 +159,7 @@ $DSCHO (2): EOF -test_expect_success 'shortlog encoding' ' +test_expect_success !MINGW 'shortlog encoding' ' git reset --hard "$commit" && git config --unset i18n.commitencoding && echo 2 > a1 && diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 99ab7ca21f..5f2b290d2b 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -212,6 +212,21 @@ test_expect_success 'log --grep' ' test_cmp expect actual ' +cat > expect << EOF +second +initial +EOF +test_expect_success 'log --invert-grep --grep' ' + git log --pretty="tformat:%s" --invert-grep --grep=th --grep=Sec >actual && + test_cmp expect actual +' + +test_expect_success 'log --invert-grep --grep -i' ' + echo initial >expect && + git log --pretty="tformat:%s" --invert-grep -i --grep=th --grep=Sec >actual && + test_cmp expect actual +' + test_expect_success 'log --grep option parsing' ' echo second >expect && git log -1 --pretty="tformat:%s" --grep sec >actual && diff --git a/t/t4204-patch-id.sh b/t/t4204-patch-id.sh index d2c930de87..baa9d3c82e 100755 --- a/t/t4204-patch-id.sh +++ b/t/t4204-patch-id.sh @@ -5,27 +5,44 @@ test_description='git patch-id' . ./test-lib.sh test_expect_success 'setup' ' - test_commit initial foo a && - test_commit first foo b && - git checkout -b same HEAD^ && - test_commit same-msg foo b && - git checkout -b notsame HEAD^ && - test_commit notsame-msg foo c + as="a a a a a a a a" && # eight a + test_write_lines $as >foo && + test_write_lines $as >bar && + git add foo bar && + git commit -a -m initial && + test_write_lines $as b >foo && + test_write_lines $as b >bar && + git commit -a -m first && + git checkout -b same master && + git commit --amend -m same-msg && + git checkout -b notsame master && + echo c >foo && + echo c >bar && + git commit --amend -a -m notsame-msg && + test_write_lines bar foo >bar-then-foo && + test_write_lines foo bar >foo-then-bar ' test_expect_success 'patch-id output is well-formed' ' - git log -p -1 | git patch-id > output && + git log -p -1 | git patch-id >output && grep "^[a-f0-9]\{40\} $(git rev-parse HEAD)$" output ' +#calculate patch id. Make sure output is not empty. calc_patch_id () { - git patch-id | - sed "s# .*##" > patch-id_"$1" + name="$1" + shift + git patch-id "$@" | + sed "s/ .*//" >patch-id_"$name" && + test_line_count -gt 0 patch-id_"$name" +} + +get_top_diff () { + git log -p -1 "$@" -O bar-then-foo -- } get_patch_id () { - git log -p -1 "$1" | git patch-id | - sed "s# .*##" > patch-id_"$1" + get_top_diff "$1" | calc_patch_id "$@" } test_expect_success 'patch-id detects equality' ' @@ -45,8 +62,8 @@ test_expect_success 'patch-id supports git-format-patch output' ' git checkout same && git format-patch -1 --stdout | calc_patch_id same && test_cmp patch-id_master patch-id_same && - set `git format-patch -1 --stdout | git patch-id` && - test "$2" = `git rev-parse HEAD` + set $(git format-patch -1 --stdout | git patch-id) && + test "$2" = $(git rev-parse HEAD) ' test_expect_success 'whitespace is irrelevant in footer' ' @@ -56,6 +73,69 @@ test_expect_success 'whitespace is irrelevant in footer' ' test_cmp patch-id_master patch-id_same ' +cmp_patch_id () { + if + test "$1" = "relevant" + then + ! test_cmp patch-id_"$2" patch-id_"$3" + else + test_cmp patch-id_"$2" patch-id_"$3" + fi +} + +test_patch_id_file_order () { + relevant="$1" + shift + name="order-${1}-$relevant" + shift + get_top_diff "master" | calc_patch_id "$name" "$@" && + git checkout same && + git format-patch -1 --stdout -O foo-then-bar | + calc_patch_id "ordered-$name" "$@" && + cmp_patch_id $relevant "$name" "ordered-$name" + +} + +# combined test for options: add more tests here to make them +# run with all options +test_patch_id () { + test_patch_id_file_order "$@" +} + +# small tests with detailed diagnostic for basic options. +test_expect_success 'file order is irrelevant with --stable' ' + test_patch_id_file_order irrelevant --stable --stable +' + +test_expect_success 'file order is relevant with --unstable' ' + test_patch_id_file_order relevant --unstable --unstable +' + +#Now test various option combinations. +test_expect_success 'default is unstable' ' + test_patch_id relevant default +' + +test_expect_success 'patchid.stable = true is stable' ' + test_config patchid.stable true && + test_patch_id irrelevant patchid.stable=true +' + +test_expect_success 'patchid.stable = false is unstable' ' + test_config patchid.stable false && + test_patch_id relevant patchid.stable=false +' + +test_expect_success '--unstable overrides patchid.stable = true' ' + test_config patchid.stable true && + test_patch_id relevant patchid.stable=true--unstable --unstable +' + +test_expect_success '--stable overrides patchid.stable = false' ' + test_config patchid.stable false && + test_patch_id irrelevant patchid.stable=false--stable --stable +' + test_expect_success 'patch-id supports git-format-patch MIME output' ' get_patch_id master && git checkout same && diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index c84ec9ae61..7398605e7b 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -31,7 +31,7 @@ test_expect_success 'set up basic repos' ' git add foo && test_tick && git config i18n.commitEncoding $test_encoding && - git commit -m "$(commit_msg $test_encoding)" && + commit_msg $test_encoding | git commit -F - && git add bar && test_tick && git commit -m "add bar" && @@ -431,6 +431,21 @@ EOF test_cmp expected actual ' +test_expect_success 'strbuf_utf8_replace() not producing NUL' ' + git log --color --pretty="tformat:%<(10,trunc)%s%>>(10,ltrunc)%C(auto)%d" | + test_decode_color | + nul_to_q >actual && + ! grep Q actual +' + +# ISO strict date format +test_expect_success 'ISO and ISO-strict date formats display the same values' ' + git log --format=%ai%n%ci | + sed -e "s/ /T/; s/ //; s/..\$/:&/" >expected && + git log --format=%aI%n%cI >actual && + test_cmp expected actual +' + # get new digests (with no abbreviations) head1=$(git rev-parse --verify HEAD~0) && head2=$(git rev-parse --verify HEAD~1) && @@ -450,4 +465,15 @@ EOF test_cmp expected actual1 ' +test_expect_success 'clean log decoration' ' + git log --no-walk --tags --pretty="%H %D" --decorate=full >actual && + cat >expected <<EOF && +$head1 tag: refs/tags/tag2 +$head2 tag: refs/tags/message-one +$old_head1 tag: refs/tags/message-two +EOF + sort actual >actual1 && + test_cmp expected actual1 +' + test_done diff --git a/t/t4210-log-i18n.sh b/t/t4210-log-i18n.sh index 52a74729ba..e585fe6129 100755 --- a/t/t4210-log-i18n.sh +++ b/t/t4210-log-i18n.sh @@ -34,7 +34,7 @@ test_expect_success 'log --grep searches in log output encoding (utf8)' ' test_cmp expect actual ' -test_expect_success 'log --grep searches in log output encoding (latin1)' ' +test_expect_success !MINGW 'log --grep searches in log output encoding (latin1)' ' cat >expect <<-\EOF && latin1 utf8 @@ -43,7 +43,7 @@ test_expect_success 'log --grep searches in log output encoding (latin1)' ' test_cmp expect actual ' -test_expect_success 'log --grep does not find non-reencoded values (utf8)' ' +test_expect_success !MINGW 'log --grep does not find non-reencoded values (utf8)' ' >expect && git log --encoding=utf8 --format=%s --grep=$latin1_e >actual && test_cmp expect actual diff --git a/t/t4211-line-log.sh b/t/t4211-line-log.sh index 7369d3c517..0901b30982 100755 --- a/t/t4211-line-log.sh +++ b/t/t4211-line-log.sh @@ -94,4 +94,9 @@ test_expect_success '-L ,Y (Y == nlines + 2)' ' test_must_fail git log -L ,$n:b.c ' +test_expect_success '-L with --first-parent and a merge' ' + git checkout parallel-change && + git log --first-parent -L 1,1:b.c +' + test_done diff --git a/t/t4212-log-corrupt.sh b/t/t4212-log-corrupt.sh index 58b792bf20..67bd8ec020 100755 --- a/t/t4212-log-corrupt.sh +++ b/t/t4212-log-corrupt.sh @@ -14,7 +14,7 @@ test_expect_success 'setup' ' ' test_expect_success 'fsck notices broken commit' ' - git fsck 2>actual && + test_must_fail git fsck 2>actual && test_i18ngrep invalid.author actual ' diff --git a/t/t4255-am-submodule.sh b/t/t4255-am-submodule.sh new file mode 100755 index 0000000000..0ba8194403 --- /dev/null +++ b/t/t4255-am-submodule.sh @@ -0,0 +1,93 @@ +#!/bin/sh + +test_description='git am handling submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +am () { + git format-patch --stdout --ignore-submodules=dirty "..$1" | git am - +} + +test_submodule_switch "am" + +am_3way () { + git format-patch --stdout --ignore-submodules=dirty "..$1" | git am --3way - +} + +KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 +test_submodule_switch "am_3way" + +test_expect_success 'setup diff.submodule' ' + test_commit one && + INITIAL=$(git rev-parse HEAD) && + + git init submodule && + ( + cd submodule && + test_commit two && + git rev-parse HEAD >../initial-submodule + ) && + git submodule add ./submodule && + git commit -m first && + + ( + cd submodule && + test_commit three && + git rev-parse HEAD >../first-submodule + ) && + git add submodule && + git commit -m second && + SECOND=$(git rev-parse HEAD) && + + ( + cd submodule && + git mv two.t four.t && + git commit -m "second submodule" && + git rev-parse HEAD >../second-submodule + ) && + test_commit four && + git add submodule && + git commit --amend --no-edit && + THIRD=$(git rev-parse HEAD) && + git submodule update --init +' + +run_test() { + START_COMMIT=$1 && + EXPECT=$2 && + # Abort any merges in progress: the previous + # test may have failed, and we should clean up. + test_might_fail git am --abort && + git reset --hard $START_COMMIT && + rm -f *.patch && + git format-patch -1 && + git reset --hard $START_COMMIT^ && + git submodule update && + git am *.patch && + git submodule update && + git -C submodule rev-parse HEAD >actual && + test_cmp $EXPECT actual +} + +test_expect_success 'diff.submodule unset' ' + test_unconfig diff.submodule && + run_test $SECOND first-submodule +' + +test_expect_success 'diff.submodule unset with extra file' ' + test_unconfig diff.submodule && + run_test $THIRD second-submodule +' + +test_expect_success 'diff.submodule=log' ' + test_config diff.submodule log && + run_test $SECOND first-submodule +' + +test_expect_success 'diff.submodule=log with extra file' ' + test_config diff.submodule log && + run_test $THIRD second-submodule +' + +test_done diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 4efaf8c58e..4b68bbafbe 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -72,7 +72,7 @@ check_tar() { for header in *.paxheader do data=${header%.paxheader}.data && - if test -h $data -o -e $data + if test -h $data || test -e $data then path=$(get_pax_header $header path) && if test -n "$path" @@ -101,7 +101,7 @@ test_expect_success \ ten=0123456789 && hundred=$ten$ten$ten$ten$ten$ten$ten$ten$ten$ten && echo long filename >a/four$hundred && mkdir a/bin && - cp /bin/sh a/bin && + test-genrandom "frotz" 500000 >a/bin/sh && printf "A\$Format:%s\$O" "$SUBSTFORMAT" >a/substfile1 && printf "A not substituted O" >a/substfile2 && if test_have_prereq SYMLINKS; then @@ -119,14 +119,10 @@ test_expect_success \ 'echo ignore me >a/ignored && echo ignored export-ignore >.git/info/attributes' -test_expect_success \ - 'add files to repository' \ - 'find a -type f | xargs git update-index --add && - find a -type l | xargs git update-index --add && - treeid=`git write-tree` && - echo $treeid >treeid && - git update-ref HEAD $(TZ=GMT GIT_COMMITTER_DATE="2005-05-27 22:00:00" \ - git commit-tree $treeid </dev/null)' +test_expect_success 'add files to repository' ' + git add a && + GIT_COMMITTER_DATE="2005-05-27 22:00" git commit -m initial +' test_expect_success 'setup export-subst' ' echo "substfile?" export-subst >>.git/info/attributes && @@ -207,7 +203,7 @@ test_expect_success \ test_expect_success 'clients cannot access unreachable commits' ' test_commit unreachable && - sha1=`git rev-parse HEAD` && + sha1=$(git rev-parse HEAD) && git reset --hard HEAD^ && git archive $sha1 >remote.tar && test_must_fail git archive --remote=. $sha1 >remote.tar @@ -215,7 +211,7 @@ test_expect_success 'clients cannot access unreachable commits' ' test_expect_success 'upload-archive can allow unreachable commits' ' test_commit unreachable1 && - sha1=`git rev-parse HEAD` && + sha1=$(git rev-parse HEAD) && git reset --hard HEAD^ && git archive $sha1 >remote.tar && test_config uploadarchive.allowUnreachable true && @@ -309,4 +305,18 @@ test_expect_success GZIP 'remote tar.gz can be disabled' ' >remote.tar.gz ' +test_expect_success 'archive and :(glob)' ' + git archive -v HEAD -- ":(glob)**/sh" >/dev/null 2>actual && + cat >expect <<EOF && +a/ +a/bin/ +a/bin/sh +EOF + test_cmp expect actual +' + +test_expect_success 'catch non-matching pathspec' ' + test_must_fail git archive -v HEAD -- "*.abc" >/dev/null +' + test_done diff --git a/t/t5003-archive-zip.sh b/t/t5003-archive-zip.sh index 21a5c93f41..c929db5633 100755 --- a/t/t5003-archive-zip.sh +++ b/t/t5003-archive-zip.sh @@ -61,14 +61,10 @@ test_expect_success \ 'echo ignore me >a/ignored && echo ignored export-ignore >.git/info/attributes' -test_expect_success \ - 'add files to repository' \ - 'find a -type f | xargs git update-index --add && - find a -type l | xargs git update-index --add && - treeid=`git write-tree` && - echo $treeid >treeid && - git update-ref HEAD $(TZ=GMT GIT_COMMITTER_DATE="2005-05-27 22:00:00" \ - git commit-tree $treeid </dev/null)' +test_expect_success 'add files to repository' ' + git add a && + GIT_COMMITTER_DATE="2005-05-27 22:00" git commit -m initial +' test_expect_success 'setup export-subst' ' echo "substfile?" export-subst >>.git/info/attributes && diff --git a/t/t5100-mailinfo.sh b/t/t5100-mailinfo.sh index 3e64a7a65d..60df10f46a 100755 --- a/t/t5100-mailinfo.sh +++ b/t/t5100-mailinfo.sh @@ -35,6 +35,10 @@ do then check_mailinfo $mail --no-inbody-headers fi + if test -f "$TEST_DIRECTORY"/t5100/msg$mail--message-id + then + check_mailinfo $mail --message-id + fi ' done @@ -89,4 +93,22 @@ test_expect_success 'mailinfo on from header without name works' ' ' +test_expect_success 'mailinfo finds headers after embedded From line' ' + mkdir embed-from && + git mailsplit -oembed-from "$TEST_DIRECTORY"/t5100/embed-from.in && + test_cmp "$TEST_DIRECTORY"/t5100/embed-from.in embed-from/0001 && + git mailinfo embed-from/msg embed-from/patch \ + <embed-from/0001 >embed-from/out && + test_cmp "$TEST_DIRECTORY"/t5100/embed-from.expect embed-from/out +' + +test_expect_success 'mailinfo on message with quoted >From' ' + mkdir quoted-from && + git mailsplit -oquoted-from "$TEST_DIRECTORY"/t5100/quoted-from.in && + test_cmp "$TEST_DIRECTORY"/t5100/quoted-from.in quoted-from/0001 && + git mailinfo quoted-from/msg quoted-from/patch \ + <quoted-from/0001 >quoted-from/out && + test_cmp "$TEST_DIRECTORY"/t5100/quoted-from.expect quoted-from/msg +' + test_done diff --git a/t/t5100/embed-from.expect b/t/t5100/embed-from.expect new file mode 100644 index 0000000000..06a3a3859a --- /dev/null +++ b/t/t5100/embed-from.expect @@ -0,0 +1,5 @@ +Author: Commit Author +Email: commit@example.com +Subject: patch subject +Date: Sat, 13 Sep 2014 21:13:23 -0400 + diff --git a/t/t5100/embed-from.in b/t/t5100/embed-from.in new file mode 100644 index 0000000000..5f3f84e508 --- /dev/null +++ b/t/t5100/embed-from.in @@ -0,0 +1,13 @@ +From 1234567890123456789012345678901234567890 Mon Sep 17 00:00:00 2001 +From: Email Author <email@example.com> +Date: Sun, 25 May 2008 00:38:18 -0700 +Subject: [PATCH] email subject + +>From 1234567890123456789012345678901234567890 Mon Sep 17 00:00:00 2001 +From: Commit Author <commit@example.com> +Date: Sat, 13 Sep 2014 21:13:23 -0400 +Subject: patch subject + +patch body +--- +patch diff --git a/t/t5100/info0012--message-id b/t/t5100/info0012--message-id new file mode 100644 index 0000000000..ac1216ff75 --- /dev/null +++ b/t/t5100/info0012--message-id @@ -0,0 +1,5 @@ +Author: Dmitriy Blinov +Email: bda@mnsspb.ru +Subject: Изменён список пакетов необходимых для сборки +Date: Wed, 12 Nov 2008 17:54:41 +0300 + diff --git a/t/t5100/msg0012--message-id b/t/t5100/msg0012--message-id new file mode 100644 index 0000000000..376e26e9ae --- /dev/null +++ b/t/t5100/msg0012--message-id @@ -0,0 +1,8 @@ +textlive-* исправлены на texlive-* +docutils заменён на python-docutils + +Действительно, оказалось, что rest2web вытягивает за собой +python-docutils. В то время как сам rest2web не нужен. + +Signed-off-by: Dmitriy Blinov <bda@mnsspb.ru> +Message-Id: <1226501681-24923-1-git-send-email-bda@mnsspb.ru> diff --git a/t/t5100/patch0012--message-id b/t/t5100/patch0012--message-id new file mode 100644 index 0000000000..36a0b68161 --- /dev/null +++ b/t/t5100/patch0012--message-id @@ -0,0 +1,30 @@ +--- + howto/build_navy.txt | 6 +++--- + 1 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/howto/build_navy.txt b/howto/build_navy.txt +index 3fd3afb..0ee807e 100644 +--- a/howto/build_navy.txt ++++ b/howto/build_navy.txt +@@ -119,8 +119,8 @@ + - libxv-dev + - libusplash-dev + - latex-make +- - textlive-lang-cyrillic +- - textlive-latex-extra ++ - texlive-lang-cyrillic ++ - texlive-latex-extra + - dia + - python-pyrex + - libtool +@@ -128,7 +128,7 @@ + - sox + - cython + - imagemagick +- - docutils ++ - python-docutils + + #. на машине dinar: добавить свой открытый ssh-ключ в authorized_keys2 пользователя ddev + #. на своей машине: отредактировать /etc/sudoers (команда ``visudo``) примерно следующим образом:: +-- +1.5.6.5 diff --git a/t/t5100/quoted-from.expect b/t/t5100/quoted-from.expect new file mode 100644 index 0000000000..8c9d48c852 --- /dev/null +++ b/t/t5100/quoted-from.expect @@ -0,0 +1,3 @@ +>From the depths of history, we are stuck with the +flaky mbox format. + diff --git a/t/t5100/quoted-from.in b/t/t5100/quoted-from.in new file mode 100644 index 0000000000..847e1c4d3e --- /dev/null +++ b/t/t5100/quoted-from.in @@ -0,0 +1,10 @@ +From 1234567890123456789012345678901234567890 Mon Sep 17 00:00:00 2001 +From: Author Name <somebody@example.com> +Date: Sun, 25 May 2008 00:38:18 -0700 +Subject: [PATCH] testing quoted >From + +>From the depths of history, we are stuck with the +flaky mbox format. + +--- +patch diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index 4bbb718751..61bc8da560 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -243,4 +243,23 @@ test_expect_success 'running index-pack in the object store' ' test -f .git/objects/pack/pack-${pack1}.idx ' +test_expect_success 'index-pack --strict warns upon missing tagger in tag' ' + sha=$(git rev-parse HEAD) && + cat >wrong-tag <<EOF && +object $sha +type commit +tag guten tag + +This is an invalid tag. +EOF + + tag=$(git hash-object -t tag -w --stdin <wrong-tag) && + pack1=$(echo $tag $sha | git pack-objects tag-test) && + echo remove tag object && + thirtyeight=${tag#??} && + rm -f .git/objects/${tag%$thirtyeight}/$thirtyeight && + git index-pack --strict tag-test-${pack1}.pack 2>err && + grep "^error:.* expected .tagger. line" err +' + test_done diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index 377d3d3899..e32e46dee1 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -13,8 +13,8 @@ add_blob() { before=$(git count-objects | sed "s/ .*//") && BLOB=$(echo aleph_0 | git hash-object -w --stdin) && BLOB_FILE=.git/objects/$(echo $BLOB | sed "s/^../&\//") && - test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && - test -f $BLOB_FILE && + verbose test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && + test_path_is_file $BLOB_FILE && test-chmtime =+0 $BLOB_FILE } @@ -35,9 +35,9 @@ test_expect_success 'prune stale packs' ' : > .git/objects/tmp_2.pack && test-chmtime =-86501 .git/objects/tmp_1.pack && git prune --expire 1.day && - test -f $orig_pack && - test -f .git/objects/tmp_2.pack && - ! test -f .git/objects/tmp_1.pack + test_path_is_file $orig_pack && + test_path_is_file .git/objects/tmp_2.pack && + test_path_is_missing .git/objects/tmp_1.pack ' @@ -45,12 +45,12 @@ test_expect_success 'prune --expire' ' add_blob && git prune --expire=1.hour.ago && - test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && - test -f $BLOB_FILE && + verbose test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && + test_path_is_file $BLOB_FILE && test-chmtime =-86500 $BLOB_FILE && git prune --expire 1.day && - test $before = $(git count-objects | sed "s/ .*//") && - ! test -f $BLOB_FILE + verbose test $before = $(git count-objects | sed "s/ .*//") && + test_path_is_missing $BLOB_FILE ' @@ -59,12 +59,12 @@ test_expect_success 'gc: implicit prune --expire' ' add_blob && test-chmtime =-$((2*$week-30)) $BLOB_FILE && git gc && - test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && - test -f $BLOB_FILE && + verbose test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && + test_path_is_file $BLOB_FILE && test-chmtime =-$((2*$week+1)) $BLOB_FILE && git gc && - test $before = $(git count-objects | sed "s/ .*//") && - ! test -f $BLOB_FILE + verbose test $before = $(git count-objects | sed "s/ .*//") && + test_path_is_missing $BLOB_FILE ' @@ -104,6 +104,28 @@ test_expect_success 'prune: prune unreachable heads' ' ' +test_expect_success 'prune: do not prune detached HEAD with no reflog' ' + + git checkout --detach --quiet && + git commit --allow-empty -m "detached commit" && + # verify that there is no reflogs + # (should be removed and disabled by previous test) + test_path_is_missing .git/logs && + git prune -n >prune_actual && + : >prune_expected && + test_cmp prune_actual prune_expected + +' + +test_expect_success 'prune: prune former HEAD after checking out branch' ' + + head_sha1=$(git rev-parse HEAD) && + git checkout --quiet master && + git prune -v >prune_actual && + grep "$head_sha1" prune_actual + +' + test_expect_success 'prune: do not prune heads listed as an argument' ' : > file2 && @@ -122,8 +144,8 @@ test_expect_success 'gc --no-prune' ' test-chmtime =-$((5001*$day)) $BLOB_FILE && git config gc.pruneExpire 2.days.ago && git gc --no-prune && - test 1 = $(git count-objects | sed "s/ .*//") && - test -f $BLOB_FILE + verbose test 1 = $(git count-objects | sed "s/ .*//") && + test_path_is_file $BLOB_FILE ' @@ -131,10 +153,10 @@ test_expect_success 'gc respects gc.pruneExpire' ' git config gc.pruneExpire 5002.days.ago && git gc && - test -f $BLOB_FILE && + test_path_is_file $BLOB_FILE && git config gc.pruneExpire 5000.days.ago && git gc && - test ! -f $BLOB_FILE + test_path_is_missing $BLOB_FILE ' @@ -143,9 +165,9 @@ test_expect_success 'gc --prune=<date>' ' add_blob && test-chmtime =-$((5001*$day)) $BLOB_FILE && git gc --prune=5002.days.ago && - test -f $BLOB_FILE && + test_path_is_file $BLOB_FILE && git gc --prune=5000.days.ago && - test ! -f $BLOB_FILE + test_path_is_missing $BLOB_FILE ' @@ -153,9 +175,9 @@ test_expect_success 'gc --prune=never' ' add_blob && git gc --prune=never && - test -f $BLOB_FILE && + test_path_is_file $BLOB_FILE && git gc --prune=now && - test ! -f $BLOB_FILE + test_path_is_missing $BLOB_FILE ' @@ -164,10 +186,10 @@ test_expect_success 'gc respects gc.pruneExpire=never' ' git config gc.pruneExpire never && add_blob && git gc && - test -f $BLOB_FILE && + test_path_is_file $BLOB_FILE && git config gc.pruneExpire now && git gc && - test ! -f $BLOB_FILE + test_path_is_missing $BLOB_FILE ' @@ -175,9 +197,9 @@ test_expect_success 'prune --expire=never' ' add_blob && git prune --expire=never && - test -f $BLOB_FILE && + test_path_is_file $BLOB_FILE && git prune && - test ! -f $BLOB_FILE + test_path_is_missing $BLOB_FILE ' @@ -187,11 +209,11 @@ test_expect_success 'gc: prune old objects after local clone' ' git clone --no-hardlinks . aclone && ( cd aclone && - test 1 = $(git count-objects | sed "s/ .*//") && - test -f $BLOB_FILE && + verbose test 1 = $(git count-objects | sed "s/ .*//") && + test_path_is_file $BLOB_FILE && git gc --prune && - test 0 = $(git count-objects | sed "s/ .*//") && - ! test -f $BLOB_FILE + verbose test 0 = $(git count-objects | sed "s/ .*//") && + test_path_is_missing $BLOB_FILE ) ' @@ -228,7 +250,7 @@ test_expect_success 'prune .git/shallow' ' grep $SHA1 .git/shallow && grep $SHA1 out && git prune && - ! test -f .git/shallow + test_path_is_missing .git/shallow ' test_done diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index f4f02ba918..6003490192 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -18,7 +18,7 @@ test_expect_success 'setup repo with moderate-sized history' ' git checkout master && blob=$(echo tagged-blob | git hash-object -w --stdin) && git tag tagged-blob $blob && - git config pack.writebitmaps true && + git config repack.writebitmaps true && git config pack.writebitmaphashcache true ' @@ -170,4 +170,13 @@ test_expect_success JGIT 'jgit can read our bitmaps' ' ) ' +test_expect_success 'splitting packs does not generate bogus bitmaps' ' + test-genrandom foo $((1024 * 1024)) >rand && + git add rand && + git commit -m "commit with big file" && + git -c pack.packSizeLimit=500k repack -adb && + git init --bare no-bitmaps.git && + git -C no-bitmaps.git fetch .. HEAD +' + test_done diff --git a/t/t5311-pack-bitmaps-shallow.sh b/t/t5311-pack-bitmaps-shallow.sh new file mode 100755 index 0000000000..872a95df33 --- /dev/null +++ b/t/t5311-pack-bitmaps-shallow.sh @@ -0,0 +1,39 @@ +#!/bin/sh + +test_description='check bitmap operation with shallow repositories' +. ./test-lib.sh + +# We want to create a situation where the shallow, grafted +# view of reachability does not match reality in a way that +# might cause us to send insufficient objects. +# +# We do this with a history that repeats a state, like: +# +# A -- B -- C +# file=1 file=2 file=1 +# +# and then create a shallow clone to the second commit, B. +# In a non-shallow clone, that would mean we already have +# the tree for A. But in a shallow one, we've grafted away +# A, and fetching A to B requires that the other side send +# us the tree for file=1. +test_expect_success 'setup shallow repo' ' + echo 1 >file && + git add file && + git commit -m orig && + echo 2 >file && + git commit -a -m update && + git clone --no-local --bare --depth=1 . shallow.git && + echo 1 >file && + git commit -a -m repeat +' + +test_expect_success 'turn on bitmaps in the parent' ' + git repack -adb +' + +test_expect_success 'shallow fetch from bitmapped repo' ' + (cd shallow.git && git fetch) +' + +test_done diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index 0736bcbcd5..04cea97f87 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -76,8 +76,7 @@ test_expect_success 'refuse pushing rewound head without --force' ' test "$victim_head" = "$pushed_head" ' -test_expect_success \ - 'push can be used to delete a ref' ' +test_expect_success 'push can be used to delete a ref' ' ( cd victim && git branch extra master ) && git send-pack ./victim :extra master && ( cd victim && @@ -196,19 +195,6 @@ rewound_push_setup() { ) } -rewound_push_succeeded() { - cmp ../parent/.git/refs/heads/master .git/refs/heads/master -} - -rewound_push_failed() { - if rewound_push_succeeded - then - false - else - true - fi -} - test_expect_success 'pushing explicit refspecs respects forcing' ' rewound_push_setup && parent_orig=$(cd parent && git rev-parse --verify master) && diff --git a/t/t5401-update-hooks.sh b/t/t5401-update-hooks.sh index 17bcb0b040..7f278d8ce9 100755 --- a/t/t5401-update-hooks.sh +++ b/t/t5401-update-hooks.sh @@ -135,4 +135,17 @@ test_expect_success 'send-pack stderr contains hook messages' ' test_cmp expect actual ' +test_expect_success 'pre-receive hook that forgets to read its input' ' + write_script victim.git/hooks/pre-receive <<-\EOF && + exit 0 + EOF + rm -f victim.git/hooks/update victim.git/hooks/post-update && + + for v in $(test_seq 100 999) + do + git branch branch_$v master || return + done && + git push ./victim.git "+refs/heads/*:refs/heads/*" +' + test_done diff --git a/t/t5403-post-checkout-hook.sh b/t/t5403-post-checkout-hook.sh index 1753ef2b91..fc898c9eac 100755 --- a/t/t5403-post-checkout-hook.sh +++ b/t/t5403-post-checkout-hook.sh @@ -39,7 +39,7 @@ test_expect_success 'post-checkout receives the right arguments with HEAD unchan old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && - test $old = $new -a $flag = 1 + test $old = $new && test $flag = 1 ' test_expect_success 'post-checkout runs as expected ' ' @@ -52,7 +52,7 @@ test_expect_success 'post-checkout args are correct with git checkout -b ' ' old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && - test $old = $new -a $flag = 1 + test $old = $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args with HEAD changed ' ' @@ -60,7 +60,7 @@ test_expect_success 'post-checkout receives the right args with HEAD changed ' ' old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && - test $old != $new -a $flag = 1 + test $old != $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args when not switching branches ' ' @@ -68,7 +68,7 @@ test_expect_success 'post-checkout receives the right args when not switching br old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && - test $old = $new -a $flag = 0 + test $old = $new && test $flag = 0 ' if test "$(git config --bool core.filemode)" = true; then diff --git a/t/t5408-send-pack-stdin.sh b/t/t5408-send-pack-stdin.sh new file mode 100755 index 0000000000..e8737df6f9 --- /dev/null +++ b/t/t5408-send-pack-stdin.sh @@ -0,0 +1,92 @@ +#!/bin/sh + +test_description='send-pack --stdin tests' +. ./test-lib.sh + +create_ref () { + tree=$(git write-tree) && + test_tick && + commit=$(echo "$1" | git commit-tree $tree) && + git update-ref "$1" $commit +} + +clear_remote () { + rm -rf remote.git && + git init --bare remote.git +} + +verify_push () { + git rev-parse "$1" >expect && + git --git-dir=remote.git rev-parse "${2:-$1}" >actual && + test_cmp expect actual +} + +test_expect_success 'setup refs' ' + cat >refs <<-\EOF && + refs/heads/A + refs/heads/C + refs/tags/D + refs/heads/B + refs/tags/E + EOF + for i in $(cat refs); do + create_ref $i || return 1 + done +' + +# sanity check our setup +test_expect_success 'refs on cmdline' ' + clear_remote && + git send-pack remote.git $(cat refs) && + for i in $(cat refs); do + verify_push $i || return 1 + done +' + +test_expect_success 'refs over stdin' ' + clear_remote && + git send-pack remote.git --stdin <refs && + for i in $(cat refs); do + verify_push $i || return 1 + done +' + +test_expect_success 'stdin lines are full refspecs' ' + clear_remote && + echo "A:other" >input && + git send-pack remote.git --stdin <input && + verify_push refs/heads/A refs/heads/other +' + +test_expect_success 'stdin mixed with cmdline' ' + clear_remote && + echo A >input && + git send-pack remote.git --stdin B <input && + verify_push A && + verify_push B +' + +test_expect_success 'cmdline refs written in order' ' + clear_remote && + test_must_fail git send-pack remote.git A:foo B:foo && + verify_push A foo +' + +test_expect_success '--stdin refs come after cmdline' ' + clear_remote && + echo A:foo >input && + test_must_fail git send-pack remote.git --stdin B:foo <input && + verify_push B foo +' + +test_expect_success 'refspecs and --mirror do not mix (cmdline)' ' + clear_remote && + test_must_fail git send-pack remote.git --mirror $(cat refs) +' + +test_expect_success 'refspecs and --mirror do not mix (stdin)' ' + clear_remote && + test_must_fail git send-pack remote.git --mirror --stdin <refs +' + +test_done diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index ac79dd915d..17c6330f98 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -1113,4 +1113,9 @@ test_extra_arg set-url origin newurl oldurl # prune takes any number of args # update takes any number of args +test_expect_success 'add remote matching the "insteadOf" URL' ' + git config url.xyz@example.com.insteadOf backup && + git remote add backup xyz@example.com +' + test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 29d59ef9fa..d78f3201f4 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -447,6 +447,43 @@ test_expect_success 'explicit pull should update tracking' ' ) ' +test_expect_success 'explicit --refmap is allowed only with command-line refspec' ' + cd "$D" && + ( + cd three && + test_must_fail git fetch --refmap="*:refs/remotes/none/*" + ) +' + +test_expect_success 'explicit --refmap option overrides remote.*.fetch' ' + cd "$D" && + git branch -f side && + ( + cd three && + git update-ref refs/remotes/origin/master base-origin-master && + o=$(git rev-parse --verify refs/remotes/origin/master) && + git fetch --refmap="refs/heads/*:refs/remotes/other/*" origin master && + n=$(git rev-parse --verify refs/remotes/origin/master) && + test "$o" = "$n" && + test_must_fail git rev-parse --verify refs/remotes/origin/side && + git rev-parse --verify refs/remotes/other/master + ) +' + +test_expect_success 'explicitly empty --refmap option disables remote.*.fetch' ' + cd "$D" && + git branch -f side && + ( + cd three && + git update-ref refs/remotes/origin/master base-origin-master && + o=$(git rev-parse --verify refs/remotes/origin/master) && + git fetch --refmap="" origin master && + n=$(git rev-parse --verify refs/remotes/origin/master) && + test "$o" = "$n" && + test_must_fail git rev-parse --verify refs/remotes/origin/side + ) +' + test_expect_success 'configured fetch updates tracking' ' cd "$D" && diff --git a/t/t5511-refspec.sh b/t/t5511-refspec.sh index c28932216b..de6db86ccf 100755 --- a/t/t5511-refspec.sh +++ b/t/t5511-refspec.sh @@ -5,7 +5,6 @@ test_description='refspec parsing' . ./test-lib.sh test_refspec () { - kind=$1 refspec=$2 expect=$3 git config remote.frotz.url "." && git config --remove-section remote.frotz && @@ -84,4 +83,9 @@ test_refspec push 'refs/heads/*/*/for-linus:refs/remotes/mine/*' invalid test_refspec fetch 'refs/heads/*/for-linus:refs/remotes/mine/*' test_refspec push 'refs/heads/*/for-linus:refs/remotes/mine/*' +good=$(printf '\303\204') +test_refspec fetch "refs/heads/${good}" +bad=$(printf '\011tab') +test_refspec fetch "refs/heads/${bad}" invalid + test_done diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 67e0ab3462..e4436c1700 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -11,6 +11,7 @@ This test checks the following functionality: * hooks * --porcelain output format * hiderefs +* reflogs ' . ./test-lib.sh @@ -1277,4 +1278,223 @@ EOF git push --no-thin --receive-pack="$rcvpck" no-thin/.git refs/heads/master:refs/heads/foo ' +test_expect_success 'pushing a tag pushes the tagged object' ' + rm -rf dst.git && + blob=$(echo unreferenced | git hash-object -w --stdin) && + git tag -m foo tag-of-blob $blob && + git init --bare dst.git && + git push dst.git tag-of-blob && + # the receiving index-pack should have noticed + # any problems, but we double check + echo unreferenced >expect && + git --git-dir=dst.git cat-file blob tag-of-blob >actual && + test_cmp expect actual +' + +test_expect_success 'push into bare respects core.logallrefupdates' ' + rm -rf dst.git && + git init --bare dst.git && + git -C dst.git config core.logallrefupdates true && + + # double push to test both with and without + # the actual pack transfer + git push dst.git master:one && + echo "one@{0} push" >expect && + git -C dst.git log -g --format="%gd %gs" one >actual && + test_cmp expect actual && + + git push dst.git master:two && + echo "two@{0} push" >expect && + git -C dst.git log -g --format="%gd %gs" two >actual && + test_cmp expect actual +' + +test_expect_success 'fetch into bare respects core.logallrefupdates' ' + rm -rf dst.git && + git init --bare dst.git && + ( + cd dst.git && + git config core.logallrefupdates true && + + # as above, we double-fetch to test both + # with and without pack transfer + git fetch .. master:one && + echo "one@{0} fetch .. master:one: storing head" >expect && + git log -g --format="%gd %gs" one >actual && + test_cmp expect actual && + + git fetch .. master:two && + echo "two@{0} fetch .. master:two: storing head" >expect && + git log -g --format="%gd %gs" two >actual && + test_cmp expect actual + ) +' + +test_expect_success 'receive.denyCurrentBranch = updateInstead' ' + git push testrepo master && + ( + cd testrepo && + git reset --hard && + git config receive.denyCurrentBranch updateInstead + ) && + test_commit third path2 && + + # Try pushing into a repository with pristine working tree + git push testrepo master && + ( + cd testrepo && + git update-index -q --refresh && + git diff-files --quiet -- && + git diff-index --quiet --cached HEAD -- && + test third = "$(cat path2)" && + test $(git -C .. rev-parse HEAD) = $(git rev-parse HEAD) + ) && + + # Try pushing into a repository with working tree needing a refresh + ( + cd testrepo && + git reset --hard HEAD^ && + test $(git -C .. rev-parse HEAD^) = $(git rev-parse HEAD) && + test-chmtime +100 path1 + ) && + git push testrepo master && + ( + cd testrepo && + git update-index -q --refresh && + git diff-files --quiet -- && + git diff-index --quiet --cached HEAD -- && + test_cmp ../path1 path1 && + test third = "$(cat path2)" && + test $(git -C .. rev-parse HEAD) = $(git rev-parse HEAD) + ) && + + # Update what is to be pushed + test_commit fourth path2 && + + # Try pushing into a repository with a dirty working tree + # (1) the working tree updated + ( + cd testrepo && + echo changed >path1 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git -C .. rev-parse HEAD^) = $(git rev-parse HEAD) && + git diff --quiet --cached && + test changed = "$(cat path1)" + ) && + + # (2) the index updated + ( + cd testrepo && + echo changed >path1 && + git add path1 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git -C .. rev-parse HEAD^) = $(git rev-parse HEAD) && + git diff --quiet && + test changed = "$(cat path1)" + ) && + + # Introduce a new file in the update + test_commit fifth path3 && + + # (3) the working tree has an untracked file that would interfere + ( + cd testrepo && + git reset --hard && + echo changed >path3 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git -C .. rev-parse HEAD^^) = $(git rev-parse HEAD) && + git diff --quiet && + git diff --quiet --cached && + test changed = "$(cat path3)" + ) && + + # (4) the target changes to what gets pushed but it still is a change + ( + cd testrepo && + git reset --hard && + echo fifth >path3 && + git add path3 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git -C .. rev-parse HEAD^^) = $(git rev-parse HEAD) && + git diff --quiet && + test fifth = "$(cat path3)" + ) + +' + +test_expect_success 'updateInstead with push-to-checkout hook' ' + rm -fr testrepo && + git init testrepo && + ( + cd testrepo && + git pull .. master && + git reset --hard HEAD^^ && + git tag initial && + git config receive.denyCurrentBranch updateInstead && + write_script .git/hooks/push-to-checkout <<-\EOF + echo >&2 updating from $(git rev-parse HEAD) + echo >&2 updating to "$1" + + git update-index -q --refresh && + git read-tree -u -m HEAD "$1" || { + status=$? + echo >&2 read-tree failed + exit $status + } + EOF + ) && + + # Try pushing into a pristine + git push testrepo master && + ( + cd testrepo && + git diff --quiet && + git diff HEAD --quiet && + test $(git -C .. rev-parse HEAD) = $(git rev-parse HEAD) + ) && + + # Try pushing into a repository with conflicting change + ( + cd testrepo && + git reset --hard initial && + echo conflicting >path2 + ) && + test_must_fail git push testrepo master && + ( + cd testrepo && + test $(git rev-parse initial) = $(git rev-parse HEAD) && + test conflicting = "$(cat path2)" && + git diff-index --quiet --cached HEAD + ) && + + # Try pushing into a repository with unrelated change + ( + cd testrepo && + git reset --hard initial && + echo unrelated >path1 && + echo irrelevant >path5 && + git add path5 + ) && + git push testrepo master && + ( + cd testrepo && + test "$(cat path1)" = unrelated && + test "$(cat path5)" = irrelevant && + test "$(git diff --name-only --cached HEAD)" = path5 && + test $(git -C .. rev-parse HEAD) = $(git rev-parse HEAD) + ) +' + test_done diff --git a/t/t5527-fetch-odd-refs.sh b/t/t5527-fetch-odd-refs.sh index edea9f957e..207899a99f 100755 --- a/t/t5527-fetch-odd-refs.sh +++ b/t/t5527-fetch-odd-refs.sh @@ -26,4 +26,37 @@ test_expect_success 'suffix ref is ignored during fetch' ' test_cmp expect actual ' +test_expect_success 'try to create repo with absurdly long refname' ' + ref240=$_z40/$_z40/$_z40/$_z40/$_z40/$_z40 && + ref1440=$ref240/$ref240/$ref240/$ref240/$ref240/$ref240 && + git init long && + ( + cd long && + test_commit long && + test_commit master + ) && + if git -C long update-ref refs/heads/$ref1440 long; then + test_set_prereq LONG_REF + else + echo >&2 "long refs not supported" + fi +' + +test_expect_success LONG_REF 'fetch handles extremely long refname' ' + git fetch long refs/heads/*:refs/remotes/long/* && + cat >expect <<-\EOF && + long + master + EOF + git for-each-ref --format="%(subject)" refs/remotes/long >actual && + test_cmp expect actual +' + +test_expect_success LONG_REF 'push handles extremely long refname' ' + git push long :refs/heads/$ref1440 && + git -C long for-each-ref --format="%(subject)" refs/heads >actual && + echo master >expect && + test_cmp expect actual +' + test_done diff --git a/t/t5528-push-default.sh b/t/t5528-push-default.sh index 6a5ac3add4..cc7451908b 100755 --- a/t/t5528-push-default.sh +++ b/t/t5528-push-default.sh @@ -26,7 +26,7 @@ check_pushed_commit () { # $2 = expected target branch for the push # $3 = [optional] repo to check for actual output (repo1 by default) test_push_success () { - git -c push.default="$1" push && + git ${1:+-c push.default="$1"} push && check_pushed_commit HEAD "$2" "$3" } @@ -34,7 +34,7 @@ test_push_success () { # check that push fails and does not modify any remote branch test_push_failure () { git --git-dir=repo1 log --no-walk --format='%h %s' --all >expect && - test_must_fail git -c push.default="$1" push && + test_must_fail git ${1:+-c push.default="$1"} push && git --git-dir=repo1 log --no-walk --format='%h %s' --all >actual && test_cmp expect actual } @@ -172,4 +172,32 @@ test_pushdefault_workflow success simple master triangular # master is updated (parent2 does not have foo) test_pushdefault_workflow success matching master triangular +# default tests, when no push-default is specified. This +# should behave the same as "simple" in non-triangular +# settings, and as "current" otherwise. + +test_expect_success 'default behavior allows "simple" push' ' + test_config branch.master.remote parent1 && + test_config branch.master.merge refs/heads/master && + test_config remote.pushdefault parent1 && + test_commit default-master-master && + test_push_success "" master +' + +test_expect_success 'default behavior rejects non-simple push' ' + test_config branch.master.remote parent1 && + test_config branch.master.merge refs/heads/foo && + test_config remote.pushdefault parent1 && + test_commit default-master-foo && + test_push_failure "" +' + +test_expect_success 'default triangular behavior acts like "current"' ' + test_config branch.master.remote parent1 && + test_config branch.master.merge refs/heads/foo && + test_config remote.pushdefault parent2 && + test_commit default-triangular && + test_push_success "" master repo2 +' + test_done diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh new file mode 100755 index 0000000000..ecb8d446a5 --- /dev/null +++ b/t/t5534-push-signed.sh @@ -0,0 +1,171 @@ +#!/bin/sh + +test_description='signed push' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-gpg.sh + +prepare_dst () { + rm -fr dst && + test_create_repo dst && + + git push dst master:noop master:ff master:noff +} + +test_expect_success setup ' + # master, ff and noff branches pointing at the same commit + test_tick && + git commit --allow-empty -m initial && + + git checkout -b noop && + git checkout -b ff && + git checkout -b noff && + + # noop stays the same, ff advances, noff rewrites + test_tick && + git commit --allow-empty --amend -m rewritten && + git checkout ff && + + test_tick && + git commit --allow-empty -m second +' + +test_expect_success 'unsigned push does not send push certificate' ' + prepare_dst && + mkdir -p dst/.git/hooks && + write_script dst/.git/hooks/post-receive <<-\EOF && + # discard the update list + cat >/dev/null + # record the push certificate + if test -n "${GIT_PUSH_CERT-}" + then + git cat-file blob $GIT_PUSH_CERT >../push-cert + fi + EOF + + git push dst noop ff +noff && + ! test -f dst/push-cert +' + +test_expect_success 'talking with a receiver without push certificate support' ' + prepare_dst && + mkdir -p dst/.git/hooks && + write_script dst/.git/hooks/post-receive <<-\EOF && + # discard the update list + cat >/dev/null + # record the push certificate + if test -n "${GIT_PUSH_CERT-}" + then + git cat-file blob $GIT_PUSH_CERT >../push-cert + fi + EOF + + git push dst noop ff +noff && + ! test -f dst/push-cert +' + +test_expect_success 'push --signed fails with a receiver without push certificate support' ' + prepare_dst && + mkdir -p dst/.git/hooks && + test_must_fail git push --signed dst noop ff +noff 2>err && + test_i18ngrep "the receiving end does not support" err +' + +test_expect_success GPG 'no certificate for a signed push with no update' ' + prepare_dst && + mkdir -p dst/.git/hooks && + write_script dst/.git/hooks/post-receive <<-\EOF && + if test -n "${GIT_PUSH_CERT-}" + then + git cat-file blob $GIT_PUSH_CERT >../push-cert + fi + EOF + git push dst noop && + ! test -f dst/push-cert +' + +test_expect_success GPG 'signed push sends push certificate' ' + prepare_dst && + mkdir -p dst/.git/hooks && + git -C dst config receive.certnonceseed sekrit && + write_script dst/.git/hooks/post-receive <<-\EOF && + # discard the update list + cat >/dev/null + # record the push certificate + if test -n "${GIT_PUSH_CERT-}" + then + git cat-file blob $GIT_PUSH_CERT >../push-cert + fi && + + cat >../push-cert-status <<E_O_F + SIGNER=${GIT_PUSH_CERT_SIGNER-nobody} + KEY=${GIT_PUSH_CERT_KEY-nokey} + STATUS=${GIT_PUSH_CERT_STATUS-nostatus} + NONCE_STATUS=${GIT_PUSH_CERT_NONCE_STATUS-nononcestatus} + NONCE=${GIT_PUSH_CERT_NONCE-nononce} + E_O_F + + EOF + + git push --signed dst noop ff +noff && + + ( + cat <<-\EOF && + SIGNER=C O Mitter <committer@example.com> + KEY=13B6F51ECDDE430D + STATUS=G + NONCE_STATUS=OK + EOF + sed -n -e "s/^nonce /NONCE=/p" -e "/^$/q" dst/push-cert + ) >expect && + + grep "$(git rev-parse noop ff) refs/heads/ff" dst/push-cert && + grep "$(git rev-parse noop noff) refs/heads/noff" dst/push-cert && + test_cmp expect dst/push-cert-status +' + +test_expect_success GPG 'fail without key and heed user.signingkey' ' + prepare_dst && + mkdir -p dst/.git/hooks && + git -C dst config receive.certnonceseed sekrit && + write_script dst/.git/hooks/post-receive <<-\EOF && + # discard the update list + cat >/dev/null + # record the push certificate + if test -n "${GIT_PUSH_CERT-}" + then + git cat-file blob $GIT_PUSH_CERT >../push-cert + fi && + + cat >../push-cert-status <<E_O_F + SIGNER=${GIT_PUSH_CERT_SIGNER-nobody} + KEY=${GIT_PUSH_CERT_KEY-nokey} + STATUS=${GIT_PUSH_CERT_STATUS-nostatus} + NONCE_STATUS=${GIT_PUSH_CERT_NONCE_STATUS-nononcestatus} + NONCE=${GIT_PUSH_CERT_NONCE-nononce} + E_O_F + + EOF + + unset GIT_COMMITTER_EMAIL && + git config user.email hasnokey@nowhere.com && + test_must_fail git push --signed dst noop ff +noff && + git config user.signingkey committer@example.com && + git push --signed dst noop ff +noff && + + ( + cat <<-\EOF && + SIGNER=C O Mitter <committer@example.com> + KEY=13B6F51ECDDE430D + STATUS=G + NONCE_STATUS=OK + EOF + sed -n -e "s/^nonce /NONCE=/p" -e "/^$/q" dst/push-cert + ) >expect && + + grep "$(git rev-parse noop ff) refs/heads/ff" dst/push-cert && + grep "$(git rev-parse noop noff) refs/heads/noff" dst/push-cert && + test_cmp expect dst/push-cert-status +' + +test_done diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh index 94553e1039..b46118846c 100755 --- a/t/t5539-fetch-http-shallow.sh +++ b/t/t5539-fetch-http-shallow.sh @@ -54,6 +54,7 @@ EOF test_expect_success 'no shallow lines after receiving ACK ready' ' ( cd shallow && + test_tick && for i in $(test_seq 15) do git checkout --orphan unrelated$i && diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index 73af16f481..d2c681ebfd 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -12,6 +12,7 @@ if test -n "$NO_CURL"; then fi ROOT_PATH="$PWD" +. "$TEST_DIRECTORY"/lib-gpg.sh . "$TEST_DIRECTORY"/lib-httpd.sh . "$TEST_DIRECTORY"/lib-terminal.sh start_httpd @@ -323,5 +324,60 @@ test_expect_success 'push into half-auth-complete requires password' ' test_cmp expect actual ' +run_with_limited_cmdline () { + (ulimit -s 128 && "$@") +} + +test_lazy_prereq CMDLINE_LIMIT 'run_with_limited_cmdline true' + +test_expect_success CMDLINE_LIMIT 'push 2000 tags over http' ' + sha1=$(git rev-parse HEAD) && + test_seq 2000 | + sort | + sed "s|.*|$sha1 refs/tags/really-long-tag-name-&|" \ + >.git/packed-refs && + run_with_limited_cmdline git push --mirror +' + +test_expect_success GPG 'push with post-receive to inspect certificate' ' + ( + cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git && + mkdir -p hooks && + write_script hooks/post-receive <<-\EOF && + # discard the update list + cat >/dev/null + # record the push certificate + if test -n "${GIT_PUSH_CERT-}" + then + git cat-file blob $GIT_PUSH_CERT >../push-cert + fi && + cat >../push-cert-status <<E_O_F + SIGNER=${GIT_PUSH_CERT_SIGNER-nobody} + KEY=${GIT_PUSH_CERT_KEY-nokey} + STATUS=${GIT_PUSH_CERT_STATUS-nostatus} + NONCE_STATUS=${GIT_PUSH_CERT_NONCE_STATUS-nononcestatus} + NONCE=${GIT_PUSH_CERT_NONCE-nononce} + E_O_F + EOF + + git config receive.certnonceseed sekrit && + git config receive.certnonceslop 30 + ) && + cd "$ROOT_PATH/test_repo_clone" && + test_commit cert-test && + git push --signed "$HTTPD_URL/smart/test_repo.git" && + ( + cd "$HTTPD_DOCUMENT_ROOT_PATH" && + cat <<-\EOF && + SIGNER=C O Mitter <committer@example.com> + KEY=13B6F51ECDDE430D + STATUS=G + NONCE_STATUS=OK + EOF + sed -n -e "s/^nonce /NONCE=/p" -e "/^$/q" push-cert + ) >expect && + test_cmp expect "$HTTPD_DOCUMENT_ROOT_PATH/push-cert-status" +' + stop_httpd test_done diff --git a/t/t5543-atomic-push.sh b/t/t5543-atomic-push.sh new file mode 100755 index 0000000000..3480b33007 --- /dev/null +++ b/t/t5543-atomic-push.sh @@ -0,0 +1,194 @@ +#!/bin/sh + +test_description='pushing to a repository using the atomic push option' + +. ./test-lib.sh + +mk_repo_pair () { + rm -rf workbench upstream && + test_create_repo upstream && + test_create_repo workbench && + ( + cd upstream && + git config receive.denyCurrentBranch warn + ) && + ( + cd workbench && + git remote add up ../upstream + ) +} + +# Compare the ref ($1) in upstream with a ref value from workbench ($2) +# i.e. test_refs second HEAD@{2} +test_refs () { + test $# = 2 && + git -C upstream rev-parse --verify "$1" >expect && + git -C workbench rev-parse --verify "$2" >actual && + test_cmp expect actual +} + +test_expect_success 'atomic push works for a single branch' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + git push --atomic up master + ) && + test_refs master master +' + +test_expect_success 'atomic push works for two branches' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git branch second && + git push --mirror up && + test_commit two && + git checkout second && + test_commit three && + git push --atomic up master second + ) && + test_refs master master && + test_refs second second +' + +test_expect_success 'atomic push works in combination with --mirror' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git checkout -b second && + test_commit two && + git push --atomic --mirror up + ) && + test_refs master master && + test_refs second second +' + +test_expect_success 'atomic push works in combination with --force' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git branch second master && + test_commit two_a && + git checkout second && + test_commit two_b && + test_commit three_b && + test_commit four && + git push --mirror up && + # The actual test is below + git checkout master && + test_commit three_a && + git checkout second && + git reset --hard HEAD^ && + git push --force --atomic up master second + ) && + test_refs master master && + test_refs second second +' + +# set up two branches where master can be pushed but second can not +# (non-fast-forward). Since second can not be pushed the whole operation +# will fail and leave master untouched. +test_expect_success 'atomic push fails if one branch fails' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git checkout -b second master && + test_commit two && + test_commit three && + test_commit four && + git push --mirror up && + git reset --hard HEAD~2 && + test_commit five && + git checkout master && + test_commit six && + test_must_fail git push --atomic --all up + ) && + test_refs master HEAD@{7} && + test_refs second HEAD@{4} +' + +test_expect_success 'atomic push fails if one tag fails remotely' ' + # prepare the repo + mk_repo_pair && + ( + cd workbench && + test_commit one && + git checkout -b second master && + test_commit two && + git push --mirror up + ) && + # a third party modifies the server side: + ( + cd upstream && + git checkout second && + git tag test_tag second + ) && + # see if we can now push both branches. + ( + cd workbench && + git checkout master && + test_commit three && + git checkout second && + test_commit four && + git tag test_tag && + test_must_fail git push --tags --atomic up master second + ) && + test_refs master HEAD@{3} && + test_refs second HEAD@{1} +' + +test_expect_success 'atomic push obeys update hook preventing a branch to be pushed' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git checkout -b second master && + test_commit two && + git push --mirror up + ) && + ( + cd upstream && + HOOKDIR="$(git rev-parse --git-dir)/hooks" && + HOOK="$HOOKDIR/update" && + mkdir -p "$HOOKDIR" && + write_script "$HOOK" <<-\EOF + # only allow update to master from now on + test "$1" = "refs/heads/master" + EOF + ) && + ( + cd workbench && + git checkout master && + test_commit three && + git checkout second && + test_commit four && + test_must_fail git push --atomic up master second + ) && + test_refs master HEAD@{3} && + test_refs second HEAD@{1} +' + +test_expect_success 'atomic push is not advertised if configured' ' + mk_repo_pair && + ( + cd upstream + git config receive.advertiseatomic 0 + ) && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + test_must_fail git push --atomic up master + ) && + test_refs master HEAD@{1} +' + +test_done diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index c3ba7ed0fe..6da9422431 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -189,5 +189,30 @@ test_expect_success 'did not use upload-pack service' ' test_cmp exp act ' +test_expect_success 'git client shows text/plain errors' ' + test_must_fail git clone "$HTTPD_URL/error/text" 2>stderr && + grep "this is the error message" stderr +' + +test_expect_success 'git client does not show html errors' ' + test_must_fail git clone "$HTTPD_URL/error/html" 2>stderr && + ! grep "this is the error message" stderr +' + +test_expect_success 'git client shows text/plain with a charset' ' + test_must_fail git clone "$HTTPD_URL/error/charset" 2>stderr && + grep "this is the error message" stderr +' + +test_expect_success 'http error messages are reencoded' ' + test_must_fail git clone "$HTTPD_URL/error/utf16" 2>stderr && + grep "this is the error message" stderr +' + +test_expect_success 'reencoding is robust to whitespace oddities' ' + test_must_fail git clone "$HTTPD_URL/error/odd-spacing" 2>stderr && + grep "this is the error message" stderr +' + stop_httpd test_done diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index e07eaf35f1..6cbc12d9a7 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -213,8 +213,6 @@ test_expect_success 'cookies stored in http.cookiefile when http.savecookies set test_cmp expect_cookies.txt cookies_tail.txt ' -test -n "$GIT_TEST_LONG" && test_set_prereq EXPENSIVE - test_expect_success EXPENSIVE 'create 50,000 tags in the repo' ' ( cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && @@ -240,8 +238,7 @@ test_expect_success EXPENSIVE 'create 50,000 tags in the repo' ' ' test_expect_success EXPENSIVE 'clone the 50,000 tag repo to check OS command line overflow' ' - git clone $HTTPD_URL/smart/repo.git too-many-refs 2>err && - test_line_count = 0 err && + git clone $HTTPD_URL/smart/repo.git too-many-refs && ( cd too-many-refs && test $(git for-each-ref refs/tags | wc -l) = 50000 diff --git a/t/t5572-pull-submodule.sh b/t/t5572-pull-submodule.sh new file mode 100755 index 0000000000..accfa5cc0c --- /dev/null +++ b/t/t5572-pull-submodule.sh @@ -0,0 +1,45 @@ +#!/bin/sh + +test_description='pull can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +reset_branch_to_HEAD () { + git branch -D "$1" && + git checkout -b "$1" HEAD && + git branch --set-upstream-to="origin/$1" "$1" +} + +git_pull () { + reset_branch_to_HEAD "$1" && + git pull +} + +# pulls without conflicts +test_submodule_switch "git_pull" + +git_pull_ff () { + reset_branch_to_HEAD "$1" && + git pull --ff +} + +test_submodule_switch "git_pull_ff" + +git_pull_ff_only () { + reset_branch_to_HEAD "$1" && + git pull --ff-only +} + +test_submodule_switch "git_pull_ff_only" + +git_pull_noff () { + reset_branch_to_HEAD "$1" && + git pull --no-ff +} + +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 +test_submodule_switch "git_pull_noff" + +test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 5e67035be8..e4f10c0f68 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -318,7 +318,7 @@ test_expect_success 'clone myhost:src uses ssh' ' expect_ssh myhost src ' -test_expect_success NOT_MINGW,NOT_CYGWIN 'clone local path foo:bar' ' +test_expect_success !MINGW,!CYGWIN 'clone local path foo:bar' ' cp -R src "foo:bar" && git clone "foo:bar" foobar && expect_ssh none @@ -339,7 +339,7 @@ test_clone_url () { expect_ssh "$2" "$3" } -test_expect_success NOT_MINGW 'clone c:temp is ssl' ' +test_expect_success !MINGW 'clone c:temp is ssl' ' test_clone_url c:temp c temp ' diff --git a/t/t5700-clone-reference.sh b/t/t5700-clone-reference.sh index 6537911a43..3e783fc450 100755 --- a/t/t5700-clone-reference.sh +++ b/t/t5700-clone-reference.sh @@ -198,4 +198,21 @@ test_expect_success 'clone using repo pointed at by gitfile as reference' ' test_cmp expected "$base_dir/O/.git/objects/info/alternates" ' +test_expect_success 'clone and dissociate from reference' ' + git init P && + ( + cd P && test_commit one + ) && + git clone P Q && + ( + cd Q && test_commit two + ) && + git clone --no-local --reference=P Q R && + git clone --no-local --reference=P --dissociate Q S && + # removing the reference P would corrupt R but not S + rm -fr P && + test_must_fail git -C R fsck && + git -C S fsck +' + test_done diff --git a/t/t5704-bundle.sh b/t/t5704-bundle.sh index a45c31692e..348d9b3bc7 100755 --- a/t/t5704-bundle.sh +++ b/t/t5704-bundle.sh @@ -14,7 +14,10 @@ test_expect_success 'setup' ' git tag -d third ' -test_expect_success 'tags can be excluded by rev-list options' ' +test_expect_success 'annotated tags can be excluded by rev-list options' ' + git bundle create bundle --all --since=7.Apr.2005.15:14:00.-0700 && + git ls-remote bundle > output && + grep tag output && git bundle create bundle --all --since=7.Apr.2005.15:16:00.-0700 && git ls-remote bundle > output && ! grep tag output diff --git a/t/t5705-clone-2gb.sh b/t/t5705-clone-2gb.sh index e9783c341a..191d6d3a78 100755 --- a/t/t5705-clone-2gb.sh +++ b/t/t5705-clone-2gb.sh @@ -46,7 +46,7 @@ test_expect_success CLONE_2GB 'clone - bare' ' test_expect_success CLONE_2GB 'clone - with worktree, file:// protocol' ' - git clone file://. clone-wt + git clone "file://$(pwd)" clone-wt ' diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh index a00a660763..c9d3ed14c3 100755 --- a/t/t5801-remote-helpers.sh +++ b/t/t5801-remote-helpers.sh @@ -87,13 +87,29 @@ test_expect_success 'push new branch by name' ' compare_refs local HEAD server refs/heads/new-name ' -test_expect_failure 'push new branch with old:new refspec' ' +test_expect_success 'push new branch with old:new refspec' ' (cd local && git push origin new-name:new-refspec ) && compare_refs local HEAD server refs/heads/new-refspec ' +test_expect_success 'push new branch with HEAD:new refspec' ' + (cd local && + git checkout new-name + git push origin HEAD:new-refspec-2 + ) && + compare_refs local HEAD server refs/heads/new-refspec-2 +' + +test_expect_success 'push delete branch' ' + (cd local && + git push origin :new-name + ) && + test_must_fail git --git-dir="server/.git" \ + rev-parse --verify refs/heads/new-name +' + test_expect_success 'forced push' ' (cd local && git checkout -b force-test && @@ -265,4 +281,28 @@ test_expect_success 'push messages' ' ) ' +test_expect_success 'fetch HEAD' ' + (cd server && + git checkout master && + echo more >>file && + git commit -a -m more + ) && + (cd local && + git fetch origin HEAD + ) && + compare_refs server HEAD local FETCH_HEAD +' + +test_expect_success 'fetch url' ' + (cd server && + git checkout master && + echo more >>file && + git commit -a -m more + ) && + (cd local && + git fetch "testgit::${PWD}/../server" + ) && + compare_refs server HEAD local FETCH_HEAD +' + test_done diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh index 3794e4ceaf..2602086303 100755 --- a/t/t6000-rev-list-misc.sh +++ b/t/t6000-rev-list-misc.sh @@ -73,4 +73,27 @@ test_expect_success 'symleft flag bit is propagated down from tag' ' test_cmp expect actual ' +test_expect_success 'rev-list can show index objects' ' + # Of the blobs and trees in the index, note: + # + # - we do not show two/three, because it is the + # same blob as "one", and we show objects only once + # + # - we do show the tree "two", because it has a valid cache tree + # from the last commit + # + # - we do not show the root tree; since we updated the index, it + # does not have a valid cache tree + # + cat >expect <<-\EOF + 8e4020bb5a8d8c873b25de15933e75cc0fc275df one + d9d3a7417b9605cfd88ee6306b28dadc29e6ab08 only-in-index + 9200b628cf9dc883a85a7abc8d6e6730baee589c two + EOF + echo only-in-index >only-in-index && + git add only-in-index && + git rev-list --objects --indexed-objects >actual && + test_cmp expect actual +' + test_done diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index 88ed3191e8..a02a45afd2 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -35,13 +35,13 @@ test_expect_success 'setup' ' : >foo && git add foo && git config i18n.commitEncoding $test_encoding && - git commit -m "$added_iso88591" && + echo "$added_iso88591" | git commit -F - && head1=$(git rev-parse --verify HEAD) && head1_short=$(git rev-parse --verify --short $head1) && tree1=$(git rev-parse --verify HEAD:) && tree1_short=$(git rev-parse --verify --short $tree1) && echo "$changed" > foo && - git commit -a -m "$changed_iso88591" && + echo "$changed_iso88591" | git commit -a -F - && head2=$(git rev-parse --verify HEAD) && head2_short=$(git rev-parse --verify --short $head2) && tree2=$(git rev-parse --verify HEAD:) && diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index 432f086c06..3758961765 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -77,12 +77,29 @@ test_expect_success "merge without conflict (--quiet)" \ "git merge-file --quiet test.txt orig.txt new2.txt" cp new1.txt test2.txt -test_expect_success "merge without conflict (missing LF at EOF)" \ - "git merge-file test2.txt orig.txt new2.txt" +test_expect_failure "merge without conflict (missing LF at EOF)" \ + "git merge-file test2.txt orig.txt new4.txt" -test_expect_success "merge result added missing LF" \ +test_expect_failure "merge result added missing LF" \ "test_cmp test.txt test2.txt" +cp new4.txt test3.txt +test_expect_success "merge without conflict (missing LF at EOF, away from change in the other file)" \ + "git merge-file --quiet test3.txt new2.txt new3.txt" + +cat > expect.txt << EOF +DOMINUS regit me, +et nihil mihi deerit. +In loco pascuae ibi me collocavit, +super aquam refectionis educavit me; +animam meam convertit, +deduxit me super semitas jusitiae, +EOF +printf "propter nomen suum." >> expect.txt + +test_expect_success "merge does not add LF away of change" \ + "test_cmp test3.txt expect.txt" + cp test.txt backup.txt test_expect_success "merge with conflicts" \ "test_must_fail git merge-file test.txt orig.txt new3.txt" @@ -107,6 +124,55 @@ EOF test_expect_success "expected conflict markers" "test_cmp test.txt expect.txt" cp backup.txt test.txt + +cat > expect.txt << EOF +Dominus regit me, et nihil mihi deerit. +In loco pascuae ibi me collocavit, +super aquam refectionis educavit me; +animam meam convertit, +deduxit me super semitas jusitiae, +propter nomen suum. +Nam et si ambulavero in medio umbrae mortis, +non timebo mala, quoniam tu mecum es: +virga tua et baculus tuus ipsa me consolata sunt. +EOF +test_expect_success "merge conflicting with --ours" \ + "git merge-file --ours test.txt orig.txt new3.txt && test_cmp test.txt expect.txt" +cp backup.txt test.txt + +cat > expect.txt << EOF +DOMINUS regit me, +et nihil mihi deerit. +In loco pascuae ibi me collocavit, +super aquam refectionis educavit me; +animam meam convertit, +deduxit me super semitas jusitiae, +propter nomen suum. +Nam et si ambulavero in medio umbrae mortis, +non timebo mala, quoniam tu mecum es: +virga tua et baculus tuus ipsa me consolata sunt. +EOF +test_expect_success "merge conflicting with --theirs" \ + "git merge-file --theirs test.txt orig.txt new3.txt && test_cmp test.txt expect.txt" +cp backup.txt test.txt + +cat > expect.txt << EOF +Dominus regit me, et nihil mihi deerit. +DOMINUS regit me, +et nihil mihi deerit. +In loco pascuae ibi me collocavit, +super aquam refectionis educavit me; +animam meam convertit, +deduxit me super semitas jusitiae, +propter nomen suum. +Nam et si ambulavero in medio umbrae mortis, +non timebo mala, quoniam tu mecum es: +virga tua et baculus tuus ipsa me consolata sunt. +EOF +test_expect_success "merge conflicting with --union" \ + "git merge-file --union test.txt orig.txt new3.txt && test_cmp test.txt expect.txt" +cp backup.txt test.txt + test_expect_success "merge with conflicts, using -L" \ "test_must_fail git merge-file -L 1 -L 2 test.txt orig.txt new3.txt" @@ -260,4 +326,23 @@ test_expect_success 'marker size' ' test_cmp expect actual ' +printf "line1\nline2\nline3" >nolf-orig.txt +printf "line1\nline2\nline3x" >nolf-diff1.txt +printf "line1\nline2\nline3y" >nolf-diff2.txt + +test_expect_success 'conflict at EOF without LF resolved by --ours' \ + 'git merge-file -p --ours nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3x" >expect.txt && + test_cmp expect.txt output.txt' + +test_expect_success 'conflict at EOF without LF resolved by --theirs' \ + 'git merge-file -p --theirs nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3y" >expect.txt && + test_cmp expect.txt output.txt' + +test_expect_success 'conflict at EOF without LF resolved by --union' \ + 'git merge-file -p --union nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3x\nline3y" >expect.txt && + test_cmp expect.txt output.txt' + test_done diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index 064f5cefeb..e6abe65d5c 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -779,4 +779,13 @@ test_expect_success 'bisect log: only skip commits left' ' git bisect reset ' +test_expect_success '"git bisect bad HEAD" behaves as "git bisect bad"' ' + git checkout parallel && + git bisect start HEAD $HASH1 && + git bisect good HEAD && + git bisect bad HEAD && + test "$HASH6" = $(git rev-parse --verify HEAD) && + git bisect reset +' + test_done diff --git a/t/t6031-merge-recursive.sh b/t/t6031-merge-recursive.sh index a953f1b55c..6464a16a19 100755 --- a/t/t6031-merge-recursive.sh +++ b/t/t6031-merge-recursive.sh @@ -13,6 +13,7 @@ test_expect_success 'mode change in one branch: keep changed version' ' git commit -m a && git checkout -b b1 master && test_chmod +x file1 && + git add file1 && git commit -m b1 && git checkout a1 && git merge-recursive master -- a1 b1 && diff --git a/t/t6038-merge-text-auto.sh b/t/t6038-merge-text-auto.sh index d9c2d386dd..85c10b0940 100755 --- a/t/t6038-merge-text-auto.sh +++ b/t/t6038-merge-text-auto.sh @@ -72,6 +72,10 @@ test_expect_success 'Merge after setting text=auto' ' same line EOF + if test_have_prereq NATIVE_CRLF; then + append_cr <expected >expected.temp && + mv expected.temp expected + fi && git config merge.renormalize true && git rm -fr . && rm -f .gitattributes && @@ -86,6 +90,10 @@ test_expect_success 'Merge addition of text=auto' ' same line EOF + if test_have_prereq NATIVE_CRLF; then + append_cr <expected >expected.temp && + mv expected.temp expected + fi && git config merge.renormalize true && git rm -fr . && rm -f .gitattributes && @@ -95,16 +103,19 @@ test_expect_success 'Merge addition of text=auto' ' ' test_expect_success 'Detect CRLF/LF conflict after setting text=auto' ' - q_to_cr <<-\EOF >expected && - <<<<<<< - first line - same line - ======= - first lineQ - same lineQ - >>>>>>> - EOF - + echo "<<<<<<<" >expected && + if test_have_prereq NATIVE_CRLF; then + echo first line | append_cr >>expected && + echo same line | append_cr >>expected && + echo ======= | append_cr >>expected + else + echo first line >>expected && + echo same line >>expected && + echo ======= >>expected + fi && + echo first line | append_cr >>expected && + echo same line | append_cr >>expected && + echo ">>>>>>>" >>expected && git config merge.renormalize false && rm -f .gitattributes && git reset --hard a && @@ -114,16 +125,19 @@ test_expect_success 'Detect CRLF/LF conflict after setting text=auto' ' ' test_expect_success 'Detect LF/CRLF conflict from addition of text=auto' ' - q_to_cr <<-\EOF >expected && - <<<<<<< - first lineQ - same lineQ - ======= - first line - same line - >>>>>>> - EOF - + echo "<<<<<<<" >expected && + echo first line | append_cr >>expected && + echo same line | append_cr >>expected && + if test_have_prereq NATIVE_CRLF; then + echo ======= | append_cr >>expected && + echo first line | append_cr >>expected && + echo same line | append_cr >>expected + else + echo ======= >>expected && + echo first line >>expected && + echo same line >>expected + fi && + echo ">>>>>>>" >>expected && git config merge.renormalize false && rm -f .gitattributes && git reset --hard b && diff --git a/t/t6041-bisect-submodule.sh b/t/t6041-bisect-submodule.sh new file mode 100755 index 0000000000..c6b7aa6977 --- /dev/null +++ b/t/t6041-bisect-submodule.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +test_description='bisect can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +git_bisect () { + git status -su >expect && + ls -1pR * >>expect && + tar czf "$TRASH_DIRECTORY/tmp.tgz" * && + GOOD=$(git rev-parse --verify HEAD) && + git checkout "$1" && + echo "foo" >bar && + git add bar && + git commit -m "bisect bad" && + BAD=$(git rev-parse --verify HEAD) && + git reset --hard HEAD^^ && + git submodule update && + git bisect start && + git bisect good $GOOD && + rm -rf * && + tar xzf "$TRASH_DIRECTORY/tmp.tgz" && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + git bisect bad $BAD +} + +test_submodule_switch "git_bisect" + +test_done diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index 719a11673b..4d5a25eedf 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -7,8 +7,9 @@ test_description='Tests replace refs functionality' exec </dev/null . ./test-lib.sh +. "$TEST_DIRECTORY/lib-gpg.sh" -add_and_commit_file() +add_and_commit_file () { _file="$1" _msg="$2" @@ -18,6 +19,38 @@ add_and_commit_file() git commit --quiet -m "$_file: $_msg" } +commit_buffer_contains_parents () +{ + git cat-file commit "$1" >payload && + sed -n -e '/^$/q' -e '/^parent /p' <payload >actual && + shift && + for _parent + do + echo "parent $_parent" + done >expected && + test_cmp expected actual +} + +commit_peeling_shows_parents () +{ + _parent_number=1 + _commit="$1" + shift && + for _parent + do + _found=$(git rev-parse --verify $_commit^$_parent_number) || return 1 + test "$_found" = "$_parent" || return 1 + _parent_number=$(( $_parent_number + 1 )) + done && + test_must_fail git rev-parse --verify $_commit^$_parent_number +} + +commit_has_parents () +{ + commit_buffer_contains_parents "$@" && + commit_peeling_shows_parents "$@" +} + HASH1= HASH2= HASH3= @@ -27,36 +60,36 @@ HASH6= HASH7= test_expect_success 'set up buggy branch' ' - echo "line 1" >> hello && - echo "line 2" >> hello && - echo "line 3" >> hello && - echo "line 4" >> hello && + echo "line 1" >>hello && + echo "line 2" >>hello && + echo "line 3" >>hello && + echo "line 4" >>hello && add_and_commit_file hello "4 lines" && HASH1=$(git rev-parse --verify HEAD) && - echo "line BUG" >> hello && - echo "line 6" >> hello && - echo "line 7" >> hello && - echo "line 8" >> hello && + echo "line BUG" >>hello && + echo "line 6" >>hello && + echo "line 7" >>hello && + echo "line 8" >>hello && add_and_commit_file hello "4 more lines with a BUG" && HASH2=$(git rev-parse --verify HEAD) && - echo "line 9" >> hello && - echo "line 10" >> hello && + echo "line 9" >>hello && + echo "line 10" >>hello && add_and_commit_file hello "2 more lines" && HASH3=$(git rev-parse --verify HEAD) && - echo "line 11" >> hello && + echo "line 11" >>hello && add_and_commit_file hello "1 more line" && HASH4=$(git rev-parse --verify HEAD) && - sed -e "s/BUG/5/" hello > hello.new && + sed -e "s/BUG/5/" hello >hello.new && mv hello.new hello && add_and_commit_file hello "BUG fixed" && HASH5=$(git rev-parse --verify HEAD) && - echo "line 12" >> hello && - echo "line 13" >> hello && + echo "line 12" >>hello && + echo "line 13" >>hello && add_and_commit_file hello "2 more lines" && HASH6=$(git rev-parse --verify HEAD) && - echo "line 14" >> hello && - echo "line 15" >> hello && - echo "line 16" >> hello && + echo "line 14" >>hello && + echo "line 15" >>hello && + echo "line 16" >>hello && add_and_commit_file hello "again 3 more lines" && HASH7=$(git rev-parse --verify HEAD) ' @@ -95,7 +128,7 @@ test_expect_success 'tag replaced commit' ' ' test_expect_success '"git fsck" works' ' - git fsck master > fsck_master.out && + git fsck master >fsck_master.out && grep "dangling commit $R" fsck_master.out && grep "dangling tag $(cat .git/refs/tags/mytag)" fsck_master.out && test -z "$(git fsck)" @@ -217,14 +250,14 @@ test_expect_success 'fetch branch with replacement' ' ( cd clone_dir && git fetch origin refs/heads/tofetch:refs/heads/parallel3 && - git log --pretty=oneline parallel3 > output.txt && + git log --pretty=oneline parallel3 >output.txt && ! grep $PARA3 output.txt && - git show $PARA3 > para3.txt && + git show $PARA3 >para3.txt && grep "A U Thor" para3.txt && git fetch origin "refs/replace/*:refs/replace/*" && - git log --pretty=oneline parallel3 > output.txt && + git log --pretty=oneline parallel3 >output.txt && grep $PARA3 output.txt && - git show $PARA3 > para3.txt && + git show $PARA3 >para3.txt && grep "O Thor" para3.txt ) ' @@ -302,7 +335,7 @@ test_expect_success 'test --format medium' ' echo "$PARA3 -> $S" && echo "$MYTAG -> $HASH1" } | sort >expected && - git replace -l --format medium | sort > actual && + git replace -l --format medium | sort >actual && test_cmp expected actual ' @@ -314,14 +347,97 @@ test_expect_success 'test --format long' ' echo "$PARA3 (commit) -> $S (commit)" && echo "$MYTAG (tag) -> $HASH1 (commit)" } | sort >expected && - git replace --format=long | sort > actual && + git replace --format=long | sort >actual && test_cmp expected actual ' +test_expect_success 'setup a fake editor' ' + write_script fakeeditor <<-\EOF + sed -e "s/A U Thor/A fake Thor/" "$1" >"$1.new" + mv "$1.new" "$1" + EOF +' + +test_expect_success '--edit with and without already replaced object' ' + test_must_fail env GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && + GIT_EDITOR=./fakeeditor git replace --force --edit "$PARA3" && + git replace -l | grep "$PARA3" && + git cat-file commit "$PARA3" | grep "A fake Thor" && + git replace -d "$PARA3" && + GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && + git replace -l | grep "$PARA3" && + git cat-file commit "$PARA3" | grep "A fake Thor" +' + +test_expect_success '--edit and change nothing or command failed' ' + git replace -d "$PARA3" && + test_must_fail env GIT_EDITOR=true git replace --edit "$PARA3" && + test_must_fail env GIT_EDITOR="./fakeeditor;false" git replace --edit "$PARA3" && + GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && + git replace -l | grep "$PARA3" && + git cat-file commit "$PARA3" | grep "A fake Thor" +' + test_expect_success 'replace ref cleanup' ' test -n "$(git replace)" && git replace -d $(git replace) && test -z "$(git replace)" ' +test_expect_success '--graft with and without already replaced object' ' + test $(git log --oneline | wc -l) = 7 && + git replace --graft $HASH5 && + test $(git log --oneline | wc -l) = 3 && + commit_has_parents $HASH5 && + test_must_fail git replace --graft $HASH5 $HASH4 $HASH3 && + git replace --force -g $HASH5 $HASH4 $HASH3 && + commit_has_parents $HASH5 $HASH4 $HASH3 && + git replace -d $HASH5 +' + +test_expect_success GPG 'set up a signed commit' ' + echo "line 17" >>hello && + echo "line 18" >>hello && + git add hello && + test_tick && + git commit --quiet -S -m "hello: 2 more lines in a signed commit" && + HASH8=$(git rev-parse --verify HEAD) && + git verify-commit $HASH8 +' + +test_expect_success GPG '--graft with a signed commit' ' + git cat-file commit $HASH8 >orig && + git replace --graft $HASH8 && + git cat-file commit $HASH8 >repl && + commit_has_parents $HASH8 && + test_must_fail git verify-commit $HASH8 && + sed -n -e "/^tree /p" -e "/^author /p" -e "/^committer /p" orig >expected && + echo >>expected && + sed -e "/^$/q" repl >actual && + test_cmp expected actual && + git replace -d $HASH8 +' + +test_expect_success GPG 'set up a merge commit with a mergetag' ' + git reset --hard HEAD && + git checkout -b test_branch HEAD~2 && + echo "line 1 from test branch" >>hello && + echo "line 2 from test branch" >>hello && + git add hello && + test_tick && + git commit -m "hello: 2 more lines from a test branch" && + HASH9=$(git rev-parse --verify HEAD) && + git tag -s -m "tag for testing with a mergetag" test_tag HEAD && + git checkout master && + git merge -s ours test_tag && + HASH10=$(git rev-parse --verify HEAD) && + git cat-file commit $HASH10 | grep "^mergetag object" +' + +test_expect_success GPG '--graft on a commit with a mergetag' ' + test_must_fail git replace --graft $HASH10 $HASH8^1 && + git replace --graft $HASH10 $HASH8^1 $HASH9 && + git replace -d $HASH10 +' + test_done diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index bda354c1c4..c66bf7981c 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -334,6 +334,19 @@ test_expect_success 'Check that :track[short] cannot be used with other atoms' ' test_must_fail git for-each-ref --format="%(refname:trackshort)" 2>/dev/null ' +test_expect_success 'Check that :track[short] works when upstream is invalid' ' + cat >expected <<-\EOF && + + + EOF + test_when_finished "git config branch.master.merge refs/heads/master" && + git config branch.master.merge refs/heads/does-not-exist && + git for-each-ref \ + --format="%(upstream:track)$LF%(upstream:trackshort)" \ + refs/heads >actual && + test_cmp expected actual +' + cat >expected <<EOF $(git rev-parse --short HEAD) EOF diff --git a/t/t6501-freshen-objects.sh b/t/t6501-freshen-objects.sh new file mode 100755 index 0000000000..157f3f91db --- /dev/null +++ b/t/t6501-freshen-objects.sh @@ -0,0 +1,132 @@ +#!/bin/sh +# +# This test covers the handling of objects which might have old +# mtimes in the filesystem (because they were used previously) +# and are just now becoming referenced again. +# +# We're going to do two things that are a little bit "fake" to +# help make our simulation easier: +# +# 1. We'll turn off reflogs. You can still run into +# problems with reflogs on, but your objects +# don't get pruned until both the reflog expiration +# has passed on their references, _and_ they are out +# of prune's expiration period. Dropping reflogs +# means we only have to deal with one variable in our tests, +# but the results generalize. +# +# 2. We'll use a temporary index file to create our +# works-in-progress. Most workflows would mention +# referenced objects in the index, which prune takes +# into account. However, many operations don't. For +# example, a partial commit with "git commit foo" +# will use a temporary index. Or they may not need +# an index at all (e.g., creating a new commit +# to refer to an existing tree). + +test_description='check pruning of dependent objects' +. ./test-lib.sh + +# We care about reachability, so we do not want to use +# the normal test_commit, which creates extra tags. +add () { + echo "$1" >"$1" && + git add "$1" +} +commit () { + test_tick && + add "$1" && + git commit -m "$1" +} + +maybe_repack () { + if test -n "$repack"; then + git repack -ad + fi +} + +for repack in '' true; do + title=${repack:+repack} + title=${title:-loose} + + test_expect_success "make repo completely empty ($title)" ' + rm -rf .git && + git init + ' + + test_expect_success "disable reflogs ($title)" ' + git config core.logallrefupdates false && + rm -rf .git/logs + ' + + test_expect_success "setup basic history ($title)" ' + commit base + ' + + test_expect_success "create and abandon some objects ($title)" ' + git checkout -b experiment && + commit abandon && + maybe_repack && + git checkout master && + git branch -D experiment + ' + + test_expect_success "simulate time passing ($title)" ' + find .git/objects -type f | + xargs test-chmtime -v -86400 + ' + + test_expect_success "start writing new commit with old blob ($title)" ' + tree=$( + GIT_INDEX_FILE=index.tmp && + export GIT_INDEX_FILE && + git read-tree HEAD && + add unrelated && + add abandon && + git write-tree + ) + ' + + test_expect_success "simultaneous gc ($title)" ' + git gc --prune=12.hours.ago + ' + + test_expect_success "finish writing out commit ($title)" ' + commit=$(echo foo | git commit-tree -p HEAD $tree) && + git update-ref HEAD $commit + ' + + # "abandon" blob should have been rescued by reference from new tree + test_expect_success "repository passes fsck ($title)" ' + git fsck + ' + + test_expect_success "abandon objects again ($title)" ' + git reset --hard HEAD^ && + find .git/objects -type f | + xargs test-chmtime -v -86400 + ' + + test_expect_success "start writing new commit with same tree ($title)" ' + tree=$( + GIT_INDEX_FILE=index.tmp && + export GIT_INDEX_FILE && + git read-tree HEAD && + add abandon && + add unrelated && + git write-tree + ) + ' + + test_expect_success "simultaneous gc ($title)" ' + git gc --prune=12.hours.ago + ' + + # tree should have been refreshed by write-tree + test_expect_success "finish writing out commit ($title)" ' + commit=$(echo foo | git commit-tree -p HEAD $tree) && + git update-ref HEAD $commit + ' +done + +test_done diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index 54d78079e8..69f11bd40d 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -350,10 +350,11 @@ test_expect_success 'git mv moves a submodule with a .git directory and .gitmodu ' test_expect_success 'git mv moves a submodule with gitfile' ' - rm -rf mod/sub && + rm -rf mod && git reset --hard && git submodule update && entry="$(git ls-files --stage sub | cut -f 1)" && + mkdir mod && ( cd mod && git mv ../sub/ . @@ -372,11 +373,12 @@ test_expect_success 'git mv moves a submodule with gitfile' ' ' test_expect_success 'mv does not complain when no .gitmodules file is found' ' - rm -rf mod/sub && + rm -rf mod && git reset --hard && git submodule update && git rm .gitmodules && entry="$(git ls-files --stage sub | cut -f 1)" && + mkdir mod && git mv sub mod/sub 2>actual.err && ! test -s actual.err && ! test -e sub && @@ -390,11 +392,12 @@ test_expect_success 'mv does not complain when no .gitmodules file is found' ' ' test_expect_success 'mv will error out on a modified .gitmodules file unless staged' ' - rm -rf mod/sub && + rm -rf mod && git reset --hard && git submodule update && git config -f .gitmodules foo.bar true && entry="$(git ls-files --stage sub | cut -f 1)" && + mkdir mod && test_must_fail git mv sub mod/sub 2>actual.err && test -s actual.err && test -e sub && @@ -413,13 +416,14 @@ test_expect_success 'mv will error out on a modified .gitmodules file unless sta ' test_expect_success 'mv issues a warning when section is not found in .gitmodules' ' - rm -rf mod/sub && + rm -rf mod && git reset --hard && git submodule update && git config -f .gitmodules --remove-section submodule.sub && git add .gitmodules && entry="$(git ls-files --stage sub | cut -f 1)" && echo "warning: Could not find section in .gitmodules where path=sub" >expect.err && + mkdir mod && git mv sub mod/sub 2>actual.err && test_i18ncmp expect.err actual.err && ! test -e sub && @@ -433,9 +437,10 @@ test_expect_success 'mv issues a warning when section is not found in .gitmodule ' test_expect_success 'mv --dry-run does not touch the submodule or .gitmodules' ' - rm -rf mod/sub && + rm -rf mod && git reset --hard && git submodule update && + mkdir mod && git mv -n sub mod/sub 2>actual.err && test -f sub/.git && git diff-index --exit-code HEAD && diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 143a8ea605..35c805a44e 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1081,7 +1081,7 @@ test_expect_success GPG \ get_tag_header rfc1991-signed-tag $commit commit $time >expect echo "RFC1991 signed tag" >>expect echo '-----BEGIN PGP MESSAGE-----' >>expect -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'creating a signed tag with rfc1991' ' echo "rfc1991" >gpghome/gpg.conf && git tag -s -m "RFC1991 signed tag" rfc1991-signed-tag $commit && @@ -1095,7 +1095,7 @@ cp "$1" actual EOF chmod +x fakeeditor -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'reediting a signed tag body omits signature' ' echo "rfc1991" >gpghome/gpg.conf && echo "RFC1991 signed tag" >expect && @@ -1103,13 +1103,13 @@ test_expect_success GPG \ test_cmp expect actual ' -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'verifying rfc1991 signature' ' echo "rfc1991" >gpghome/gpg.conf && git tag -v rfc1991-signed-tag ' -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'list tag with rfc1991 signature' ' echo "rfc1991" >gpghome/gpg.conf && echo "rfc1991-signed-tag RFC1991 signed tag" >expect && @@ -1123,12 +1123,12 @@ test_expect_success GPG \ rm -f gpghome/gpg.conf -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'verifying rfc1991 signature without --rfc1991' ' git tag -v rfc1991-signed-tag ' -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'list tag with rfc1991 signature without --rfc1991' ' echo "rfc1991-signed-tag RFC1991 signed tag" >expect && git tag -l -n1 rfc1991-signed-tag >actual && @@ -1139,7 +1139,7 @@ test_expect_success GPG \ test_cmp expect actual ' -test_expect_success GPG \ +test_expect_success GPG,RFC1991 \ 'reediting a signed tag body omits signature' ' echo "RFC1991 signed tag" >expect && GIT_EDITOR=./fakeeditor git tag -f -s rfc1991-signed-tag $commit && @@ -1385,41 +1385,103 @@ test_expect_success 'lexical sort' ' git tag foo1.6 && git tag foo1.10 && git tag -l --sort=refname "foo*" >actual && - cat >expect <<EOF && -foo1.10 -foo1.3 -foo1.6 -EOF + cat >expect <<-\EOF && + foo1.10 + foo1.3 + foo1.6 + EOF test_cmp expect actual ' test_expect_success 'version sort' ' git tag -l --sort=version:refname "foo*" >actual && - cat >expect <<EOF && -foo1.3 -foo1.6 -foo1.10 -EOF + cat >expect <<-\EOF && + foo1.3 + foo1.6 + foo1.10 + EOF test_cmp expect actual ' test_expect_success 'reverse version sort' ' git tag -l --sort=-version:refname "foo*" >actual && - cat >expect <<EOF && -foo1.10 -foo1.6 -foo1.3 -EOF + cat >expect <<-\EOF && + foo1.10 + foo1.6 + foo1.3 + EOF test_cmp expect actual ' test_expect_success 'reverse lexical sort' ' git tag -l --sort=-refname "foo*" >actual && - cat >expect <<EOF && -foo1.6 -foo1.3 -foo1.10 -EOF + cat >expect <<-\EOF && + foo1.6 + foo1.3 + foo1.10 + EOF + test_cmp expect actual +' + +test_expect_success 'configured lexical sort' ' + git config tag.sort "v:refname" && + git tag -l "foo*" >actual && + cat >expect <<-\EOF && + foo1.3 + foo1.6 + foo1.10 + EOF + test_cmp expect actual +' + +test_expect_success 'option override configured sort' ' + git tag -l --sort=-refname "foo*" >actual && + cat >expect <<-\EOF && + foo1.6 + foo1.3 + foo1.10 + EOF + test_cmp expect actual +' + +test_expect_success 'invalid sort parameter on command line' ' + test_must_fail git tag -l --sort=notvalid "foo*" >actual +' + +test_expect_success 'invalid sort parameter in configuratoin' ' + git config tag.sort "v:notvalid" && + git tag -l "foo*" >actual && + cat >expect <<-\EOF && + foo1.10 + foo1.3 + foo1.6 + EOF + test_cmp expect actual +' + +run_with_limited_stack () { + (ulimit -s 128 && "$@") +} + +test_lazy_prereq ULIMIT 'run_with_limited_stack true' + +# we require ulimit, this excludes Windows +test_expect_success ULIMIT '--contains works in a deep repo' ' + >expect && + i=1 && + while test $i -lt 8000 + do + echo "commit refs/heads/master +committer A U Thor <author@example.com> $((1000000000 + $i * 100)) +0200 +data <<EOF +commit #$i +EOF" + test $i = 1 && echo "from refs/heads/master^0" + i=$(($i + 1)) + done | git fast-import && + git checkout master && + git tag far-far-away HEAD^ && + run_with_limited_stack git tag --contains HEAD >actual && test_cmp expect actual ' diff --git a/t/t7102-reset.sh b/t/t7102-reset.sh index ee703bed64..98bcfe21aa 100755 --- a/t/t7102-reset.sh +++ b/t/t7102-reset.sh @@ -44,7 +44,9 @@ test_expect_success 'creating initial files and commits' ' echo "1st line 2nd file" >secondfile && echo "2nd line 2nd file" >>secondfile && - git -c "i18n.commitEncoding=$test_encoding" commit -a -m "$(commit_msg $test_encoding)" && + # "git commit -m" would break MinGW, as Windows refuse to pass + # $test_encoding encoded parameter to git. + commit_msg $test_encoding | git -c "i18n.commitEncoding=$test_encoding" commit -a -F - && head5=$(git rev-parse --verify HEAD) ' # git log --pretty=oneline # to see those SHA1 involved @@ -334,7 +336,9 @@ test_expect_success 'redoing the last two commits should succeed' ' echo "1st line 2nd file" >secondfile && echo "2nd line 2nd file" >>secondfile && - git -c "i18n.commitEncoding=$test_encoding" commit -a -m "$(commit_msg $test_encoding)" && + # "git commit -m" would break MinGW, as Windows refuse to pass + # $test_encoding encoded parameter to git. + commit_msg $test_encoding | git -c "i18n.commitEncoding=$test_encoding" commit -a -F - && check_changes $head5 ' diff --git a/t/t7112-reset-submodule.sh b/t/t7112-reset-submodule.sh new file mode 100755 index 0000000000..2eda6adeb1 --- /dev/null +++ b/t/t7112-reset-submodule.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +test_description='reset can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +test_submodule_switch "git reset --keep" + +test_submodule_switch "git reset --merge" + +test_submodule_forced_switch "git reset --hard" + +test_done diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 0c9ec0ad44..eae9e5a937 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -223,6 +223,23 @@ test_expect_success 'checkout --merge --conflict=diff3 <branch>' ' test_cmp two expect ' +test_expect_success 'switch to another branch while carrying a deletion' ' + + git checkout -f master && git reset --hard && git clean -f && + git rm two && + + test_must_fail git checkout simple 2>errs && + test_i18ngrep overwritten errs && + + git checkout --merge simple 2>errs && + test_i18ngrep ! overwritten errs && + git ls-files -u && + test_must_fail git cat-file -t :0:two && + test "$(git cat-file -t :1:two)" = blob && + test "$(git cat-file -t :2:two)" = blob && + test_must_fail git cat-file -t :3:two +' + test_expect_success 'checkout to detach HEAD (with advice declined)' ' git config advice.detachedHead false && diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index d58b097ff3..63e04277f9 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -346,8 +346,21 @@ test_expect_success 'amend commit to fix date' ' ' -test_expect_success 'commit complains about bogus date' ' - test_must_fail git commit --amend --date=10.11.2010 +test_expect_success 'commit mentions forced date in output' ' + git commit --amend --date=2010-01-02T03:04:05 >output && + grep "Date: *Sat Jan 2 03:04:05 2010" output +' + +test_expect_success 'commit complains about completely bogus dates' ' + test_must_fail git commit --amend --date=seventeen +' + +test_expect_success 'commit --date allows approxidate' ' + git commit --amend \ + --date="midnight the 12th of october, anno domini 1979" && + echo "Fri Oct 12 00:00:00 1979 +0000" >expect && + git log -1 --format=%ad >actual && + test_cmp expect actual ' test_expect_success 'sign off (1)' ' diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 9a3f3a1b41..051489ea33 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -344,6 +344,13 @@ test_expect_success 'message shows author when it is not equal to committer' ' .git/COMMIT_EDITMSG ' +test_expect_success 'message shows date when it is explicitly set' ' + git commit --allow-empty -e -m foo --date="2010-01-02T03:04:05" && + test_i18ngrep \ + "^# Date: *Sat Jan 2 03:04:05 2010 +0000" \ + .git/COMMIT_EDITMSG +' + test_expect_success AUTOIDENT 'message shows committer when it is automatic' ' echo >>negative && @@ -563,4 +570,30 @@ test_expect_success 'commit --status with custom comment character' ' test_i18ngrep "^; Changes to be committed:" .git/COMMIT_EDITMSG ' +test_expect_success 'switch core.commentchar' ' + test_commit "#foo" foo && + GIT_EDITOR=.git/FAKE_EDITOR git -c core.commentChar=auto commit --amend && + test_i18ngrep "^; Changes to be committed:" .git/COMMIT_EDITMSG +' + +test_expect_success 'switch core.commentchar but out of options' ' + cat >text <<\EOF && +# 1 +; 2 +@ 3 +! 4 +$ 5 +% 6 +^ 7 +& 8 +| 9 +: 10 +EOF + git commit --amend -F text && + ( + test_set_editor .git/FAKE_EDITOR && + test_must_fail git -c core.commentChar=auto commit --amend + ) +' + test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index d48006960e..8ed5788808 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -1350,8 +1350,7 @@ test_expect_success "status (core.commentchar with submodule summary)" ' test_expect_success "status (core.commentchar with two chars with submodule summary)" ' test_config core.commentchar ";;" && - git -c status.displayCommentPrefix=true status >output && - test_i18ncmp expect output + test_must_fail git -c status.displayCommentPrefix=true status ' test_expect_success "--ignore-submodules=all suppresses submodule summary" ' diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index e97477a3b9..474dab381a 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -48,10 +48,11 @@ test_expect_success GPG 'create signed commits' ' git tag eighth-signed-alt ' -test_expect_success GPG 'show signatures' ' +test_expect_success GPG 'verify and show signatures' ' ( for commit in initial second merge fourth-signed fifth-signed sixth-signed seventh-signed do + git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && grep "Good signature from" actual && ! grep "BAD signature from" actual && @@ -61,6 +62,7 @@ test_expect_success GPG 'show signatures' ' ( for commit in merge^2 fourth-unsigned sixth-unsigned seventh-unsigned do + test_must_fail git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && ! grep "Good signature from" actual && ! grep "BAD signature from" actual && @@ -79,11 +81,25 @@ test_expect_success GPG 'show signatures' ' ) ' +test_expect_success GPG 'show signed commit with signature' ' + git show -s initial >commit && + git show -s --show-signature initial >show && + git verify-commit -v initial >verify.1 2>verify.2 && + git cat-file commit initial >cat && + grep -v "gpg: " show >show.commit && + grep "gpg: " show >show.gpg && + grep -v "^ " cat | grep -v "^gpgsig " >cat.commit && + test_cmp show.commit commit && + test_cmp show.gpg verify.2 && + test_cmp cat.commit verify.1 +' + test_expect_success GPG 'detect fudged signature' ' git cat-file commit seventh-signed >raw && sed -e "s/seventh/7th forged/" raw >forged1 && git hash-object -w -t commit forged1 >forged1.commit && + ! git verify-commit $(cat forged1.commit) && git show --pretty=short --show-signature $(cat forged1.commit) >actual1 && grep "BAD signature from" actual1 && ! grep "Good signature from" actual1 @@ -94,6 +110,7 @@ test_expect_success GPG 'detect fudged signature with NUL' ' cat raw >forged2 && echo Qwik | tr "Q" "\000" >>forged2 && git hash-object -w -t commit forged2 >forged2.commit && + ! git verify-commit $(cat forged2.commit) && git show --pretty=short --show-signature $(cat forged2.commit) >actual2 && grep "BAD signature from" actual2 && ! grep "Good signature from" actual2 @@ -102,6 +119,7 @@ test_expect_success GPG 'detect fudged signature with NUL' ' test_expect_success GPG 'amending already signed commit' ' git checkout fourth-signed^0 && git commit --amend -S --no-edit && + git verify-commit HEAD && git show -s --show-signature HEAD >actual && grep "Good signature from" actual && ! grep "BAD signature from" actual diff --git a/t/t7513-interpret-trailers.sh b/t/t7513-interpret-trailers.sh new file mode 100755 index 0000000000..bd0ab46750 --- /dev/null +++ b/t/t7513-interpret-trailers.sh @@ -0,0 +1,895 @@ +#!/bin/sh +# +# Copyright (c) 2013, 2014 Christian Couder +# + +test_description='git interpret-trailers' + +. ./test-lib.sh + +# When we want one trailing space at the end of each line, let's use sed +# to make sure that these spaces are not removed by any automatic tool. + +test_expect_success 'setup' ' + : >empty && + cat >basic_message <<-\EOF && + subject + + body + EOF + cat >complex_message_body <<-\EOF && + my subject + + my body which is long + and contains some special + chars like : = ? ! + + EOF + sed -e "s/ Z\$/ /" >complex_message_trailers <<-\EOF && + Fixes: Z + Acked-by: Z + Reviewed-by: Z + Signed-off-by: Z + EOF + cat >basic_patch <<-\EOF + --- + foo.txt | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + + diff --git a/foo.txt b/foo.txt + index 0353767..1d91aa1 100644 + --- a/foo.txt + +++ b/foo.txt + @@ -1,3 +1,3 @@ + + -bar + +baz + + -- + 1.9.rc0.11.ga562ddc + + EOF +' + +test_expect_success 'without config' ' + sed -e "s/ Z\$/ /" >expected <<-\EOF && + + ack: Peff + Reviewed-by: Z + Acked-by: Johan + EOF + git interpret-trailers --trailer "ack = Peff" --trailer "Reviewed-by" \ + --trailer "Acked-by: Johan" empty >actual && + test_cmp expected actual +' + +test_expect_success 'without config in another order' ' + sed -e "s/ Z\$/ /" >expected <<-\EOF && + + Acked-by: Johan + Reviewed-by: Z + ack: Peff + EOF + git interpret-trailers --trailer "Acked-by: Johan" --trailer "Reviewed-by" \ + --trailer "ack = Peff" empty >actual && + test_cmp expected actual +' + +test_expect_success '--trim-empty without config' ' + cat >expected <<-\EOF && + + ack: Peff + Acked-by: Johan + EOF + git interpret-trailers --trim-empty --trailer ack=Peff \ + --trailer "Reviewed-by" --trailer "Acked-by: Johan" \ + --trailer "sob:" empty >actual && + test_cmp expected actual +' + +test_expect_success 'with config option on the command line' ' + cat >expected <<-\EOF && + + Acked-by: Johan + Reviewed-by: Peff + EOF + echo "Acked-by: Johan" | + git -c "trailer.Acked-by.ifexists=addifdifferent" interpret-trailers \ + --trailer "Reviewed-by: Peff" --trailer "Acked-by: Johan" >actual && + test_cmp expected actual +' + +test_expect_success 'with config setup' ' + git config trailer.ack.key "Acked-by: " && + cat >expected <<-\EOF && + + Acked-by: Peff + EOF + git interpret-trailers --trim-empty --trailer "ack = Peff" empty >actual && + test_cmp expected actual && + git interpret-trailers --trim-empty --trailer "Acked-by = Peff" empty >actual && + test_cmp expected actual && + git interpret-trailers --trim-empty --trailer "Acked-by :Peff" empty >actual && + test_cmp expected actual +' + +test_expect_success 'with config setup and ":=" as separators' ' + git config trailer.separators ":=" && + git config trailer.ack.key "Acked-by= " && + cat >expected <<-\EOF && + + Acked-by= Peff + EOF + git interpret-trailers --trim-empty --trailer "ack = Peff" empty >actual && + test_cmp expected actual && + git interpret-trailers --trim-empty --trailer "Acked-by= Peff" empty >actual && + test_cmp expected actual && + git interpret-trailers --trim-empty --trailer "Acked-by : Peff" empty >actual && + test_cmp expected actual +' + +test_expect_success 'with config setup and "%" as separators' ' + git config trailer.separators "%" && + cat >expected <<-\EOF && + + bug% 42 + count% 10 + bug% 422 + EOF + git interpret-trailers --trim-empty --trailer "bug = 42" \ + --trailer count%10 --trailer "test: stuff" \ + --trailer "bug % 422" empty >actual && + test_cmp expected actual +' + +test_expect_success 'with "%" as separators and a message with trailers' ' + cat >special_message <<-\EOF && + Special Message + + bug% 42 + count% 10 + bug% 422 + EOF + cat >expected <<-\EOF && + Special Message + + bug% 42 + count% 10 + bug% 422 + count% 100 + EOF + git interpret-trailers --trailer count%100 \ + special_message >actual && + test_cmp expected actual +' + +test_expect_success 'with config setup and ":=#" as separators' ' + git config trailer.separators ":=#" && + git config trailer.bug.key "Bug #" && + cat >expected <<-\EOF && + + Bug #42 + EOF + git interpret-trailers --trim-empty --trailer "bug = 42" empty >actual && + test_cmp expected actual +' + +test_expect_success 'with commit basic message' ' + cat basic_message >expected && + echo >>expected && + git interpret-trailers <basic_message >actual && + test_cmp expected actual +' + +test_expect_success 'with basic patch' ' + cat basic_message >input && + cat basic_patch >>input && + cat basic_message >expected && + echo >>expected && + cat basic_patch >>expected && + git interpret-trailers <input >actual && + test_cmp expected actual +' + +test_expect_success 'with commit complex message as argument' ' + cat complex_message_body complex_message_trailers >complex_message && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Fixes: Z + Acked-by= Z + Reviewed-by: Z + Signed-off-by: Z + EOF + git interpret-trailers complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'with 2 files arguments' ' + cat basic_message >>expected && + echo >>expected && + cat basic_patch >>expected && + git interpret-trailers complex_message input >actual && + test_cmp expected actual +' + +test_expect_success 'with message that has comments' ' + cat basic_message >message_with_comments && + sed -e "s/ Z\$/ /" >>message_with_comments <<-\EOF && + # comment + + # other comment + Cc: Z + # yet another comment + Reviewed-by: Johan + Reviewed-by: Z + # last comment + + EOF + cat basic_patch >>message_with_comments && + cat basic_message >expected && + cat >>expected <<-\EOF && + # comment + + Reviewed-by: Johan + Cc: Peff + # last comment + + EOF + cat basic_patch >>expected && + git interpret-trailers --trim-empty --trailer "Cc: Peff" message_with_comments >actual && + test_cmp expected actual +' + +test_expect_success 'with message that has an old style conflict block' ' + cat basic_message >message_with_comments && + sed -e "s/ Z\$/ /" >>message_with_comments <<-\EOF && + # comment + + # other comment + Cc: Z + # yet another comment + Reviewed-by: Johan + Reviewed-by: Z + # last comment + + Conflicts: + + EOF + cat basic_message >expected && + cat >>expected <<-\EOF && + # comment + + Reviewed-by: Johan + Cc: Peff + # last comment + + Conflicts: + + EOF + git interpret-trailers --trim-empty --trailer "Cc: Peff" message_with_comments >actual && + test_cmp expected actual +' + +test_expect_success 'with commit complex message and trailer args' ' + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Fixes: Z + Acked-by= Z + Reviewed-by: Z + Signed-off-by: Z + Acked-by= Peff + Bug #42 + EOF + git interpret-trailers --trailer "ack: Peff" \ + --trailer "bug: 42" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'with complex patch, args and --trim-empty' ' + cat complex_message >complex_patch && + cat basic_patch >>complex_patch && + cat complex_message_body >expected && + cat >>expected <<-\EOF && + Acked-by= Peff + Bug #42 + EOF + cat basic_patch >>expected && + git interpret-trailers --trim-empty --trailer "ack: Peff" \ + --trailer "bug: 42" <complex_patch >actual && + test_cmp expected actual +' + +test_expect_success 'using "where = before"' ' + git config trailer.bug.where "before" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Reviewed-by: Z + Signed-off-by: Z + Acked-by= Peff + EOF + git interpret-trailers --trailer "ack: Peff" \ + --trailer "bug: 42" complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "where = after"' ' + git config trailer.ack.where "after" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Peff + Reviewed-by: Z + Signed-off-by: Z + EOF + git interpret-trailers --trailer "ack: Peff" \ + --trailer "bug: 42" complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "where = end"' ' + git config trailer.review.key "Reviewed-by" && + git config trailer.review.where "end" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Fixes: Z + Acked-by= Z + Acked-by= Peff + Reviewed-by: Z + Signed-off-by: Z + Reviewed-by: Junio + Reviewed-by: Johannes + EOF + git interpret-trailers --trailer "ack: Peff" \ + --trailer "Reviewed-by: Junio" --trailer "Reviewed-by: Johannes" \ + complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "where = start"' ' + git config trailer.review.key "Reviewed-by" && + git config trailer.review.where "start" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Reviewed-by: Johannes + Reviewed-by: Junio + Fixes: Z + Acked-by= Z + Acked-by= Peff + Reviewed-by: Z + Signed-off-by: Z + EOF + git interpret-trailers --trailer "ack: Peff" \ + --trailer "Reviewed-by: Junio" --trailer "Reviewed-by: Johannes" \ + complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "where = before" for a token in the middle of the message' ' + git config trailer.review.key "Reviewed-by:" && + git config trailer.review.where "before" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Peff + Reviewed-by:Johan + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "ack: Peff" --trailer "bug: 42" \ + --trailer "review: Johan" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "where = before" and --trim-empty' ' + cat complex_message_body >expected && + cat >>expected <<-\EOF && + Bug #46 + Bug #42 + Acked-by= Peff + Reviewed-by:Johan + EOF + git interpret-trailers --trim-empty --trailer "ack: Peff" \ + --trailer "bug: 42" --trailer "review: Johan" \ + --trailer "Bug: 46" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'the default is "ifExists = addIfDifferentNeighbor"' ' + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Peff + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "ack: Peff" --trailer "review:" \ + --trailer "ack: Junio" --trailer "bug: 42" --trailer "ack: Peff" \ + --trailer "ack: Peff" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'default "ifExists" is now "addIfDifferent"' ' + git config trailer.ifexists "addIfDifferent" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Peff + Acked-by= Junio + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "ack: Peff" --trailer "review:" \ + --trailer "ack: Junio" --trailer "bug: 42" --trailer "ack: Peff" \ + --trailer "ack: Peff" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = addIfDifferent" with "where = end"' ' + git config trailer.ack.ifExists "addIfDifferent" && + git config trailer.ack.where "end" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + Acked-by= Peff + EOF + git interpret-trailers --trailer "ack: Peff" --trailer "review:" \ + --trailer "bug: 42" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = addIfDifferent" with "where = before"' ' + git config trailer.ack.ifExists "addIfDifferent" && + git config trailer.ack.where "before" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Peff + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "ack: Peff" --trailer "review:" \ + --trailer "bug: 42" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = addIfDifferentNeighbor" with "where = end"' ' + git config trailer.ack.ifExists "addIfDifferentNeighbor" && + git config trailer.ack.where "end" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + Acked-by= Peff + Acked-by= Junio + Tested-by: Jakub + Acked-by= Junio + Acked-by= Peff + EOF + git interpret-trailers --trailer "ack: Peff" --trailer "review:" \ + --trailer "ack: Junio" --trailer "bug: 42" \ + --trailer "Tested-by: Jakub" --trailer "ack: Junio" \ + --trailer "ack: Junio" --trailer "ack: Peff" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = addIfDifferentNeighbor" with "where = after"' ' + git config trailer.ack.ifExists "addIfDifferentNeighbor" && + git config trailer.ack.where "after" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Peff + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + Tested-by: Jakub + EOF + git interpret-trailers --trailer "ack: Peff" --trailer "review:" \ + --trailer "ack: Junio" --trailer "bug: 42" \ + --trailer "Tested-by: Jakub" --trailer "ack: Junio" \ + --trailer "ack: Junio" --trailer "ack: Peff" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = addIfDifferentNeighbor" and --trim-empty' ' + git config trailer.ack.ifExists "addIfDifferentNeighbor" && + cat complex_message_body >expected && + cat >>expected <<-\EOF && + Bug #42 + Acked-by= Peff + Acked-by= Junio + Acked-by= Peff + EOF + git interpret-trailers --trim-empty --trailer "ack: Peff" \ + --trailer "Acked-by= Peff" --trailer "review:" \ + --trailer "ack: Junio" --trailer "bug: 42" \ + --trailer "ack: Peff" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = add" with "where = end"' ' + git config trailer.ack.ifExists "add" && + git config trailer.ack.where "end" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + Acked-by= Peff + Acked-by= Peff + Tested-by: Jakub + Acked-by= Junio + Tested-by: Johannes + Acked-by= Peff + EOF + git interpret-trailers --trailer "ack: Peff" \ + --trailer "Acked-by= Peff" --trailer "review:" \ + --trailer "Tested-by: Jakub" --trailer "ack: Junio" \ + --trailer "bug: 42" --trailer "Tested-by: Johannes" \ + --trailer "ack: Peff" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = add" with "where = after"' ' + git config trailer.ack.ifExists "add" && + git config trailer.ack.where "after" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Peff + Acked-by= Peff + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "ack: Peff" \ + --trailer "Acked-by= Peff" --trailer "review:" \ + --trailer "ack: Junio" --trailer "bug: 42" \ + --trailer "ack: Peff" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = replace"' ' + git config trailer.fix.key "Fixes: " && + git config trailer.fix.ifExists "replace" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Acked-by= Z + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + Fixes: 22 + EOF + git interpret-trailers --trailer "review:" \ + --trailer "fix=53" --trailer "ack: Junio" --trailer "fix=22" \ + --trailer "bug: 42" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = replace" with "where = after"' ' + git config trailer.fix.where "after" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: 22 + Acked-by= Z + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "review:" \ + --trailer "fix=53" --trailer "ack: Junio" --trailer "fix=22" \ + --trailer "bug: 42" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifExists = doNothing"' ' + git config trailer.fix.ifExists "doNothing" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "review:" --trailer "fix=53" \ + --trailer "ack: Junio" --trailer "fix=22" \ + --trailer "bug: 42" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'the default is "ifMissing = add"' ' + git config trailer.cc.key "Cc: " && + git config trailer.cc.where "before" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Cc: Linus + Fixes: Z + Acked-by= Z + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "review:" --trailer "fix=53" \ + --trailer "cc=Linus" --trailer "ack: Junio" \ + --trailer "fix=22" --trailer "bug: 42" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'when default "ifMissing" is "doNothing"' ' + git config trailer.ifmissing "doNothing" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Fixes: Z + Acked-by= Z + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "review:" --trailer "fix=53" \ + --trailer "cc=Linus" --trailer "ack: Junio" \ + --trailer "fix=22" --trailer "bug: 42" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual && + git config trailer.ifmissing "add" +' + +test_expect_success 'using "ifMissing = add" with "where = end"' ' + git config trailer.cc.key "Cc: " && + git config trailer.cc.where "end" && + git config trailer.cc.ifMissing "add" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + Cc: Linus + EOF + git interpret-trailers --trailer "review:" --trailer "fix=53" \ + --trailer "ack: Junio" --trailer "fix=22" \ + --trailer "bug: 42" --trailer "cc=Linus" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifMissing = add" with "where = before"' ' + git config trailer.cc.key "Cc: " && + git config trailer.cc.where "before" && + git config trailer.cc.ifMissing "add" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Cc: Linus + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "review:" --trailer "fix=53" \ + --trailer "ack: Junio" --trailer "fix=22" \ + --trailer "bug: 42" --trailer "cc=Linus" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "ifMissing = doNothing"' ' + git config trailer.cc.ifMissing "doNothing" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --trailer "review:" --trailer "fix=53" \ + --trailer "cc=Linus" --trailer "ack: Junio" \ + --trailer "fix=22" --trailer "bug: 42" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'default "where" is now "after"' ' + git config trailer.where "after" && + git config --unset trailer.ack.where && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Z + Acked-by= Peff + Acked-by= Peff + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + Tested-by: Jakub + Tested-by: Johannes + EOF + git interpret-trailers --trailer "ack: Peff" \ + --trailer "Acked-by= Peff" --trailer "review:" \ + --trailer "Tested-by: Jakub" --trailer "ack: Junio" \ + --trailer "bug: 42" --trailer "Tested-by: Johannes" \ + --trailer "ack: Peff" <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'with simple command' ' + git config trailer.sign.key "Signed-off-by: " && + git config trailer.sign.where "after" && + git config trailer.sign.ifExists "addIfDifferentNeighbor" && + git config trailer.sign.command "echo \"A U Thor <author@example.com>\"" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Fixes: Z + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + Signed-off-by: A U Thor <author@example.com> + EOF + git interpret-trailers --trailer "review:" --trailer "fix=22" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'with command using commiter information' ' + git config trailer.sign.ifExists "addIfDifferent" && + git config trailer.sign.command "echo \"\$GIT_COMMITTER_NAME <\$GIT_COMMITTER_EMAIL>\"" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Fixes: Z + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + Signed-off-by: C O Mitter <committer@example.com> + EOF + git interpret-trailers --trailer "review:" --trailer "fix=22" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'with command using author information' ' + git config trailer.sign.key "Signed-off-by: " && + git config trailer.sign.where "after" && + git config trailer.sign.ifExists "addIfDifferentNeighbor" && + git config trailer.sign.command "echo \"\$GIT_AUTHOR_NAME <\$GIT_AUTHOR_EMAIL>\"" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Fixes: Z + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + Signed-off-by: A U Thor <author@example.com> + EOF + git interpret-trailers --trailer "review:" --trailer "fix=22" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'setup a commit' ' + echo "Content of the first commit." > a.txt && + git add a.txt && + git commit -m "Add file a.txt" +' + +test_expect_success 'with command using $ARG' ' + git config trailer.fix.ifExists "replace" && + git config trailer.fix.command "git log -1 --oneline --format=\"%h (%s)\" --abbrev-commit --abbrev=14 \$ARG" && + FIXED=$(git log -1 --oneline --format="%h (%s)" --abbrev-commit --abbrev=14 HEAD) && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-EOF && + Fixes: $FIXED + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + Signed-off-by: A U Thor <author@example.com> + EOF + git interpret-trailers --trailer "review:" --trailer "fix=HEAD" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'with failing command using $ARG' ' + git config trailer.fix.ifExists "replace" && + git config trailer.fix.command "false \$ARG" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-EOF && + Fixes: Z + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + Signed-off-by: A U Thor <author@example.com> + EOF + git interpret-trailers --trailer "review:" --trailer "fix=HEAD" \ + <complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'with empty tokens' ' + git config --unset trailer.fix.command && + cat >expected <<-EOF && + + Signed-off-by: A U Thor <author@example.com> + EOF + git interpret-trailers --trailer ":" --trailer ":test" >actual <<-EOF && + EOF + test_cmp expected actual +' + +test_expect_success 'with command but no key' ' + git config --unset trailer.sign.key && + cat >expected <<-EOF && + + sign: A U Thor <author@example.com> + EOF + git interpret-trailers >actual <<-EOF && + EOF + test_cmp expected actual +' + +test_expect_success 'with no command and no key' ' + git config --unset trailer.review.key && + cat >expected <<-EOF && + + review: Junio + sign: A U Thor <author@example.com> + EOF + git interpret-trailers --trailer "review:Junio" >actual <<-EOF && + EOF + test_cmp expected actual +' + +test_done diff --git a/t/t7515-status-symlinks.sh b/t/t7515-status-symlinks.sh new file mode 100755 index 0000000000..9f989be01b --- /dev/null +++ b/t/t7515-status-symlinks.sh @@ -0,0 +1,43 @@ +#!/bin/sh + +test_description='git status and symlinks' + +. ./test-lib.sh + +test_expect_success 'setup' ' + echo .gitignore >.gitignore && + echo actual >>.gitignore && + echo expect >>.gitignore && + mkdir dir && + echo x >dir/file1 && + echo y >dir/file2 && + git add dir && + git commit -m initial && + git tag initial +' + +test_expect_success SYMLINKS 'symlink to a directory' ' + test_when_finished "rm symlink" && + ln -s dir symlink && + echo "?? symlink" >expect && + git status --porcelain >actual && + test_cmp expect actual +' + +test_expect_success SYMLINKS 'symlink replacing a directory' ' + test_when_finished "rm -rf copy && git reset --hard initial" && + mkdir copy && + cp dir/file1 copy/file1 && + echo "changed in copy" >copy/file2 && + git add copy && + git commit -m second && + rm -rf copy && + ln -s dir copy && + echo " D copy/file1" >expect && + echo " D copy/file2" >>expect && + echo "?? copy" >>expect && + git status --porcelain >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh index 05d9db090d..7eeb207b32 100755 --- a/t/t7610-mergetool.sh +++ b/t/t7610-mergetool.sh @@ -14,512 +14,527 @@ Testing basic merge tool invocation' # running mergetool test_expect_success 'setup' ' - git config rerere.enabled true && - echo master >file1 && - echo master spaced >"spaced name" && - echo master file11 >file11 && - echo master file12 >file12 && - echo master file13 >file13 && - echo master file14 >file14 && - mkdir subdir && - echo master sub >subdir/file3 && - test_create_repo submod && - ( - cd submod && - : >foo && - git add foo && - git commit -m "Add foo" - ) && - git submodule add git://example.com/submod submod && - git add file1 "spaced name" file1[1-4] subdir/file3 .gitmodules submod && - git commit -m "add initial versions" && - - git checkout -b branch1 master && - git submodule update -N && - echo branch1 change >file1 && - echo branch1 newfile >file2 && - echo branch1 spaced >"spaced name" && - echo branch1 both added >both && - echo branch1 change file11 >file11 && - echo branch1 change file13 >file13 && - echo branch1 sub >subdir/file3 && - ( - cd submod && - echo branch1 submodule >bar && - git add bar && - git commit -m "Add bar on branch1" && - git checkout -b submod-branch1 - ) && - git add file1 "spaced name" file11 file13 file2 subdir/file3 submod && - git add both && - git rm file12 && - git commit -m "branch1 changes" && - - git checkout -b stash1 master && - echo stash1 change file11 >file11 && - git add file11 && - git commit -m "stash1 changes" && - - git checkout -b stash2 master && - echo stash2 change file11 >file11 && - git add file11 && - git commit -m "stash2 changes" && - - git checkout master && - git submodule update -N && - echo master updated >file1 && - echo master new >file2 && - echo master updated spaced >"spaced name" && - echo master both added >both && - echo master updated file12 >file12 && - echo master updated file14 >file14 && - echo master new sub >subdir/file3 && - ( - cd submod && - echo master submodule >bar && - git add bar && - git commit -m "Add bar on master" && - git checkout -b submod-master - ) && - git add file1 "spaced name" file12 file14 file2 subdir/file3 submod && - git add both && - git rm file11 && - git commit -m "master updates" && - - git config merge.tool mytool && - git config mergetool.mytool.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" && - git config mergetool.mytool.trustExitCode true && - git config mergetool.mybase.cmd "cat \"\$BASE\" >\"\$MERGED\"" && - git config mergetool.mybase.trustExitCode true + test_config rerere.enabled true && + echo master >file1 && + echo master spaced >"spaced name" && + echo master file11 >file11 && + echo master file12 >file12 && + echo master file13 >file13 && + echo master file14 >file14 && + mkdir subdir && + echo master sub >subdir/file3 && + test_create_repo submod && + ( + cd submod && + : >foo && + git add foo && + git commit -m "Add foo" + ) && + git submodule add git://example.com/submod submod && + git add file1 "spaced name" file1[1-4] subdir/file3 .gitmodules submod && + git commit -m "add initial versions" && + + git checkout -b branch1 master && + git submodule update -N && + echo branch1 change >file1 && + echo branch1 newfile >file2 && + echo branch1 spaced >"spaced name" && + echo branch1 both added >both && + echo branch1 change file11 >file11 && + echo branch1 change file13 >file13 && + echo branch1 sub >subdir/file3 && + ( + cd submod && + echo branch1 submodule >bar && + git add bar && + git commit -m "Add bar on branch1" && + git checkout -b submod-branch1 + ) && + git add file1 "spaced name" file11 file13 file2 subdir/file3 submod && + git add both && + git rm file12 && + git commit -m "branch1 changes" && + + git checkout -b stash1 master && + echo stash1 change file11 >file11 && + git add file11 && + git commit -m "stash1 changes" && + + git checkout -b stash2 master && + echo stash2 change file11 >file11 && + git add file11 && + git commit -m "stash2 changes" && + + git checkout master && + git submodule update -N && + echo master updated >file1 && + echo master new >file2 && + echo master updated spaced >"spaced name" && + echo master both added >both && + echo master updated file12 >file12 && + echo master updated file14 >file14 && + echo master new sub >subdir/file3 && + ( + cd submod && + echo master submodule >bar && + git add bar && + git commit -m "Add bar on master" && + git checkout -b submod-master + ) && + git add file1 "spaced name" file12 file14 file2 subdir/file3 submod && + git add both && + git rm file11 && + git commit -m "master updates" && + + git config merge.tool mytool && + git config mergetool.mytool.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" && + git config mergetool.mytool.trustExitCode true && + git config mergetool.mybase.cmd "cat \"\$BASE\" >\"\$MERGED\"" && + git config mergetool.mybase.trustExitCode true ' test_expect_success 'custom mergetool' ' - git checkout -b test1 branch1 && - git submodule update -N && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "" | git mergetool file1 file1 ) && - ( yes "" | git mergetool file2 "spaced name" >/dev/null 2>&1 ) && - ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && - test "$(cat file1)" = "master updated" && - test "$(cat file2)" = "master new" && - test "$(cat subdir/file3)" = "master new sub" && - test "$(cat submod/bar)" = "branch1 submodule" && - git commit -m "branch1 resolved with mergetool" + git checkout -b test1 branch1 && + git submodule update -N && + test_must_fail git merge master >/dev/null 2>&1 && + ( yes "" | git mergetool both >/dev/null 2>&1 ) && + ( yes "" | git mergetool file1 file1 ) && + ( yes "" | git mergetool file2 "spaced name" >/dev/null 2>&1 ) && + ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && + test "$(cat file1)" = "master updated" && + test "$(cat file2)" = "master new" && + test "$(cat subdir/file3)" = "master new sub" && + test "$(cat submod/bar)" = "branch1 submodule" && + git commit -m "branch1 resolved with mergetool" ' test_expect_success 'mergetool crlf' ' - git config core.autocrlf true && - git checkout -b test2 branch1 && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && - ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && - ( yes "" | git mergetool "spaced name" >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod >/dev/null 2>&1 ) && - test "$(printf x | cat file1 -)" = "$(printf "master updated\r\nx")" && - test "$(printf x | cat file2 -)" = "$(printf "master new\r\nx")" && - test "$(printf x | cat subdir/file3 -)" = "$(printf "master new sub\r\nx")" && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && - git commit -m "branch1 resolved with mergetool - autocrlf" && - git config core.autocrlf false && - git reset --hard + test_config core.autocrlf true && + git checkout -b test2 branch1 && + test_must_fail git merge master >/dev/null 2>&1 && + ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && + ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && + ( yes "" | git mergetool "spaced name" >/dev/null 2>&1 ) && + ( yes "" | git mergetool both >/dev/null 2>&1 ) && + ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod >/dev/null 2>&1 ) && + test "$(printf x | cat file1 -)" = "$(printf "master updated\r\nx")" && + test "$(printf x | cat file2 -)" = "$(printf "master new\r\nx")" && + test "$(printf x | cat subdir/file3 -)" = "$(printf "master new sub\r\nx")" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + git commit -m "branch1 resolved with mergetool - autocrlf" && + test_config core.autocrlf false && + git reset --hard ' test_expect_success 'mergetool in subdir' ' - git checkout -b test3 branch1 && - git submodule update -N && - ( - cd subdir && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool file3 >/dev/null 2>&1 ) && - test "$(cat file3)" = "master new sub" - ) + git checkout -b test3 branch1 && + git submodule update -N && + ( + cd subdir && + test_must_fail git merge master >/dev/null 2>&1 && + ( yes "" | git mergetool file3 >/dev/null 2>&1 ) && + test "$(cat file3)" = "master new sub" + ) ' test_expect_success 'mergetool on file in parent dir' ' - ( - cd subdir && - ( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) && - ( yes "" | git mergetool ../file2 ../spaced\ name >/dev/null 2>&1 ) && - ( yes "" | git mergetool ../both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool ../file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool ../file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool ../submod >/dev/null 2>&1 ) && - test "$(cat ../file1)" = "master updated" && - test "$(cat ../file2)" = "master new" && - test "$(cat ../submod/bar)" = "branch1 submodule" && - git commit -m "branch1 resolved with mergetool - subdir" - ) + ( + cd subdir && + ( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) && + ( yes "" | git mergetool ../file2 ../spaced\ name >/dev/null 2>&1 ) && + ( yes "" | git mergetool ../both >/dev/null 2>&1 ) && + ( yes "d" | git mergetool ../file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool ../file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool ../submod >/dev/null 2>&1 ) && + test "$(cat ../file1)" = "master updated" && + test "$(cat ../file2)" = "master new" && + test "$(cat ../submod/bar)" = "branch1 submodule" && + git commit -m "branch1 resolved with mergetool - subdir" + ) ' test_expect_success 'mergetool skips autoresolved' ' - git checkout -b test4 branch1 && - git submodule update -N && - test_must_fail git merge master && - test -n "$(git ls-files -u)" && - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git reset --hard + git checkout -b test4 branch1 && + git submodule update -N && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git reset --hard ' test_expect_success 'mergetool merges all from subdir' ' - ( - cd subdir && - git config rerere.enabled false && - test_must_fail git merge master && - ( yes "r" | git mergetool ../submod ) && - ( yes "d" "d" | git mergetool --no-prompt ) && - test "$(cat ../file1)" = "master updated" && - test "$(cat ../file2)" = "master new" && - test "$(cat file3)" = "master new sub" && - ( cd .. && git submodule update -N ) && - test "$(cat ../submod/bar)" = "master submodule" && - git commit -m "branch2 resolved by mergetool from subdir" - ) + ( + cd subdir && + test_config rerere.enabled false && + test_must_fail git merge master && + ( yes "r" | git mergetool ../submod ) && + ( yes "d" "d" | git mergetool --no-prompt ) && + test "$(cat ../file1)" = "master updated" && + test "$(cat ../file2)" = "master new" && + test "$(cat file3)" = "master new sub" && + ( cd .. && git submodule update -N ) && + test "$(cat ../submod/bar)" = "master submodule" && + git commit -m "branch2 resolved by mergetool from subdir" + ) ' test_expect_success 'mergetool skips resolved paths when rerere is active' ' - git config rerere.enabled true && - rm -rf .git/rr-cache && - git checkout -b test5 branch1 - git submodule update -N && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "l" | git mergetool --no-prompt submod >/dev/null 2>&1 ) && - ( yes "d" "d" | git mergetool --no-prompt >/dev/null 2>&1 ) && - git submodule update -N && - output="$(yes "n" | git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git reset --hard + test_config rerere.enabled true && + rm -rf .git/rr-cache && + git checkout -b test5 branch1 && + git submodule update -N && + test_must_fail git merge master >/dev/null 2>&1 && + ( yes "l" | git mergetool --no-prompt submod >/dev/null 2>&1 ) && + ( yes "d" "d" | git mergetool --no-prompt >/dev/null 2>&1 ) && + git submodule update -N && + output="$(yes "n" | git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git reset --hard ' test_expect_success 'conflicted stash sets up rerere' ' - git config rerere.enabled true && - git checkout stash1 && - echo "Conflicting stash content" >file11 && - git stash && - - git checkout --detach stash2 && - test_must_fail git stash apply && - - test -n "$(git ls-files -u)" && - conflicts="$(git rerere remaining)" && - test "$conflicts" = "file11" && - output="$(git mergetool --no-prompt)" && - test "$output" != "No files need merging" && - - git commit -am "save the stash resolution" && - - git reset --hard stash2 && - test_must_fail git stash apply && - - test -n "$(git ls-files -u)" && - conflicts="$(git rerere remaining)" && - test -z "$conflicts" && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" + test_config rerere.enabled true && + git checkout stash1 && + echo "Conflicting stash content" >file11 && + git stash && + + git checkout --detach stash2 && + test_must_fail git stash apply && + + test -n "$(git ls-files -u)" && + conflicts="$(git rerere remaining)" && + test "$conflicts" = "file11" && + output="$(git mergetool --no-prompt)" && + test "$output" != "No files need merging" && + + git commit -am "save the stash resolution" && + + git reset --hard stash2 && + test_must_fail git stash apply && + + test -n "$(git ls-files -u)" && + conflicts="$(git rerere remaining)" && + test -z "$conflicts" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" ' test_expect_success 'mergetool takes partial path' ' - git reset --hard - git config rerere.enabled false && - git checkout -b test12 branch1 && - git submodule update -N && - test_must_fail git merge master && - - #should not need these lines - #( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - #( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - #( yes "l" | git mergetool submod >/dev/null 2>&1 ) && - #( yes "" | git mergetool file1 file2 >/dev/null 2>&1 ) && - - ( yes "" | git mergetool subdir ) && - - test "$(cat subdir/file3)" = "master new sub" && - git reset --hard + git reset --hard && + test_config rerere.enabled false && + git checkout -b test12 branch1 && + git submodule update -N && + test_must_fail git merge master && + + ( yes "" | git mergetool subdir ) && + + test "$(cat subdir/file3)" = "master new sub" && + git reset --hard ' test_expect_success 'deleted vs modified submodule' ' - git checkout -b test6 branch1 && - git submodule update -N && - mv submod submod-movedaside && - git rm --cached submod && - git commit -m "Submodule deleted from branch" && - git checkout -b test6.a test6 && - test_must_fail git merge master && - test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && - rmdir submod && mv submod-movedaside submod && - test "$(cat submod/bar)" = "branch1 submodule" && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git commit -m "Merge resolved by keeping module" && - - mv submod submod-movedaside && - git checkout -b test6.b test6 && - git submodule update -N && - test_must_fail git merge master && - test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && - test ! -e submod && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git commit -m "Merge resolved by deleting module" && - - mv submod-movedaside submod && - git checkout -b test6.c master && - git submodule update -N && - test_must_fail git merge test6 && - test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && - test ! -e submod && - test -d submod.orig && - git submodule update -N && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git commit -m "Merge resolved by deleting module" && - mv submod.orig submod && - - git checkout -b test6.d master && - git submodule update -N && - test_must_fail git merge test6 && - test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && - test "$(cat submod/bar)" = "master submodule" && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git commit -m "Merge resolved by keeping module" && - git reset --hard HEAD + git checkout -b test6 branch1 && + git submodule update -N && + mv submod submod-movedaside && + git rm --cached submod && + git commit -m "Submodule deleted from branch" && + git checkout -b test6.a test6 && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && + ( yes "" | git mergetool both >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod ) && + rmdir submod && mv submod-movedaside submod && + test "$(cat submod/bar)" = "branch1 submodule" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping module" && + + mv submod submod-movedaside && + git checkout -b test6.b test6 && + git submodule update -N && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && + ( yes "" | git mergetool both >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod ) && + test ! -e submod && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by deleting module" && + + mv submod-movedaside submod && + git checkout -b test6.c master && + git submodule update -N && + test_must_fail git merge test6 && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && + ( yes "" | git mergetool both >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod ) && + test ! -e submod && + test -d submod.orig && + git submodule update -N && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by deleting module" && + mv submod.orig submod && + + git checkout -b test6.d master && + git submodule update -N && + test_must_fail git merge test6 && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && + ( yes "" | git mergetool both >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod ) && + test "$(cat submod/bar)" = "master submodule" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping module" && + git reset --hard HEAD ' test_expect_success 'file vs modified submodule' ' - git checkout -b test7 branch1 && - git submodule update -N && - mv submod submod-movedaside && - git rm --cached submod && - echo not a submodule >submod && - git add submod && - git commit -m "Submodule path becomes file" && - git checkout -b test7.a branch1 && - test_must_fail git merge master && - test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && - rmdir submod && mv submod-movedaside submod && - test "$(cat submod/bar)" = "branch1 submodule" && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git commit -m "Merge resolved by keeping module" && - - mv submod submod-movedaside && - git checkout -b test7.b test7 && - test_must_fail git merge master && - test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && - git submodule update -N && - test "$(cat submod)" = "not a submodule" && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git commit -m "Merge resolved by keeping file" && - - git checkout -b test7.c master && - rmdir submod && mv submod-movedaside submod && - test ! -e submod.orig && - git submodule update -N && - test_must_fail git merge test7 && - test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && - test -d submod.orig && - git submodule update -N && - test "$(cat submod)" = "not a submodule" && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git commit -m "Merge resolved by keeping file" && - - git checkout -b test7.d master && - rmdir submod && mv submod.orig submod && - git submodule update -N && - test_must_fail git merge test7 && - test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both>/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && - test "$(cat submod/bar)" = "master submodule" && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && - output="$(git mergetool --no-prompt)" && - test "$output" = "No files need merging" && - git commit -m "Merge resolved by keeping module" + git checkout -b test7 branch1 && + git submodule update -N && + mv submod submod-movedaside && + git rm --cached submod && + echo not a submodule >submod && + git add submod && + git commit -m "Submodule path becomes file" && + git checkout -b test7.a branch1 && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && + ( yes "" | git mergetool both >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod ) && + rmdir submod && mv submod-movedaside submod && + test "$(cat submod/bar)" = "branch1 submodule" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping module" && + + mv submod submod-movedaside && + git checkout -b test7.b test7 && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && + ( yes "" | git mergetool both >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod ) && + git submodule update -N && + test "$(cat submod)" = "not a submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping file" && + + git checkout -b test7.c master && + rmdir submod && mv submod-movedaside submod && + test ! -e submod.orig && + git submodule update -N && + test_must_fail git merge test7 && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && + ( yes "" | git mergetool both >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod ) && + test -d submod.orig && + git submodule update -N && + test "$(cat submod)" = "not a submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping file" && + + git checkout -b test7.d master && + rmdir submod && mv submod.orig submod && + git submodule update -N && + test_must_fail git merge test7 && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && + ( yes "" | git mergetool both>/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod ) && + test "$(cat submod/bar)" = "master submodule" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping module" ' test_expect_success 'submodule in subdirectory' ' - git checkout -b test10 branch1 && - git submodule update -N && - ( - cd subdir && - test_create_repo subdir_module && + git checkout -b test10 branch1 && + git submodule update -N && + ( + cd subdir && + test_create_repo subdir_module && + ( + cd subdir_module && + : >file15 && + git add file15 && + git commit -m "add initial versions" + ) + ) && + git submodule add git://example.com/subsubmodule subdir/subdir_module && + git add subdir/subdir_module && + git commit -m "add submodule in subdirectory" && + + git checkout -b test10.a test10 && + git submodule update -N && ( - cd subdir_module && - : >file15 && - git add file15 && - git commit -m "add initial versions" - ) - ) && - git submodule add git://example.com/subsubmodule subdir/subdir_module && - git add subdir/subdir_module && - git commit -m "add submodule in subdirectory" && - - git checkout -b test10.a test10 && - git submodule update -N && - ( - cd subdir/subdir_module && - git checkout -b super10.a && - echo test10.a >file15 && - git add file15 && - git commit -m "on branch 10.a" - ) && - git add subdir/subdir_module && - git commit -m "change submodule in subdirectory on test10.a" && - - git checkout -b test10.b test10 && - git submodule update -N && - ( cd subdir/subdir_module && - git checkout -b super10.b && - echo test10.b >file15 && - git add file15 && - git commit -m "on branch 10.b" - ) && - git add subdir/subdir_module && - git commit -m "change submodule in subdirectory on test10.b" && - - test_must_fail git merge test10.a >/dev/null 2>&1 && - ( - cd subdir && - ( yes "l" | git mergetool subdir_module ) - ) && - test "$(cat subdir/subdir_module/file15)" = "test10.b" && - git submodule update -N && - test "$(cat subdir/subdir_module/file15)" = "test10.b" && - git reset --hard && - git submodule update -N && - - test_must_fail git merge test10.a >/dev/null 2>&1 && - ( yes "r" | git mergetool subdir/subdir_module ) && - test "$(cat subdir/subdir_module/file15)" = "test10.b" && - git submodule update -N && - test "$(cat subdir/subdir_module/file15)" = "test10.a" && - git commit -m "branch1 resolved with mergetool" && - rm -rf subdir/subdir_module + git checkout -b super10.a && + echo test10.a >file15 && + git add file15 && + git commit -m "on branch 10.a" + ) && + git add subdir/subdir_module && + git commit -m "change submodule in subdirectory on test10.a" && + + git checkout -b test10.b test10 && + git submodule update -N && + ( + cd subdir/subdir_module && + git checkout -b super10.b && + echo test10.b >file15 && + git add file15 && + git commit -m "on branch 10.b" + ) && + git add subdir/subdir_module && + git commit -m "change submodule in subdirectory on test10.b" && + + test_must_fail git merge test10.a >/dev/null 2>&1 && + ( + cd subdir && + ( yes "l" | git mergetool subdir_module ) + ) && + test "$(cat subdir/subdir_module/file15)" = "test10.b" && + git submodule update -N && + test "$(cat subdir/subdir_module/file15)" = "test10.b" && + git reset --hard && + git submodule update -N && + + test_must_fail git merge test10.a >/dev/null 2>&1 && + ( yes "r" | git mergetool subdir/subdir_module ) && + test "$(cat subdir/subdir_module/file15)" = "test10.b" && + git submodule update -N && + test "$(cat subdir/subdir_module/file15)" = "test10.a" && + git commit -m "branch1 resolved with mergetool" && + rm -rf subdir/subdir_module ' test_expect_success 'directory vs modified submodule' ' - git checkout -b test11 branch1 && - mv submod submod-movedaside && - git rm --cached submod && - mkdir submod && - echo not a submodule >submod/file16 && - git add submod/file16 && - git commit -m "Submodule path becomes directory" && - - test_must_fail git merge master && - test -n "$(git ls-files -u)" && - ( yes "l" | git mergetool submod ) && - test "$(cat submod/file16)" = "not a submodule" && - rm -rf submod.orig && - - git reset --hard >/dev/null 2>&1 && - test_must_fail git merge master && - test -n "$(git ls-files -u)" && - test ! -e submod.orig && - ( yes "r" | git mergetool submod ) && - test -d submod.orig && - test "$(cat submod.orig/file16)" = "not a submodule" && - rm -r submod.orig && - mv submod-movedaside/.git submod && - ( cd submod && git clean -f && git reset --hard ) && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && - git reset --hard >/dev/null 2>&1 && rm -rf submod-movedaside && - - git checkout -b test11.c master && - git submodule update -N && - test_must_fail git merge test11 && - test -n "$(git ls-files -u)" && - ( yes "l" | git mergetool submod ) && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && - - git reset --hard >/dev/null 2>&1 && - git submodule update -N && - test_must_fail git merge test11 && - test -n "$(git ls-files -u)" && - test ! -e submod.orig && - ( yes "r" | git mergetool submod ) && - test "$(cat submod/file16)" = "not a submodule" && - - git reset --hard master >/dev/null 2>&1 && - ( cd submod && git clean -f && git reset --hard ) && - git submodule update -N + git checkout -b test11 branch1 && + mv submod submod-movedaside && + git rm --cached submod && + mkdir submod && + echo not a submodule >submod/file16 && + git add submod/file16 && + git commit -m "Submodule path becomes directory" && + + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "l" | git mergetool submod ) && + test "$(cat submod/file16)" = "not a submodule" && + rm -rf submod.orig && + + git reset --hard >/dev/null 2>&1 && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + test ! -e submod.orig && + ( yes "r" | git mergetool submod ) && + test -d submod.orig && + test "$(cat submod.orig/file16)" = "not a submodule" && + rm -r submod.orig && + mv submod-movedaside/.git submod && + ( cd submod && git clean -f && git reset --hard ) && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + git reset --hard >/dev/null 2>&1 && rm -rf submod-movedaside && + + git checkout -b test11.c master && + git submodule update -N && + test_must_fail git merge test11 && + test -n "$(git ls-files -u)" && + ( yes "l" | git mergetool submod ) && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + + git reset --hard >/dev/null 2>&1 && + git submodule update -N && + test_must_fail git merge test11 && + test -n "$(git ls-files -u)" && + test ! -e submod.orig && + ( yes "r" | git mergetool submod ) && + test "$(cat submod/file16)" = "not a submodule" && + + git reset --hard master >/dev/null 2>&1 && + ( cd submod && git clean -f && git reset --hard ) && + git submodule update -N ' test_expect_success 'file with no base' ' - git checkout -b test13 branch1 && - test_must_fail git merge master && - git mergetool --no-prompt --tool mybase -- both && - >expected && - test_cmp both expected && - git reset --hard master >/dev/null 2>&1 + git checkout -b test13 branch1 && + test_must_fail git merge master && + git mergetool --no-prompt --tool mybase -- both && + >expected && + test_cmp both expected && + git reset --hard master >/dev/null 2>&1 ' test_expect_success 'custom commands override built-ins' ' - git checkout -b test14 branch1 && - git config mergetool.defaults.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" && - git config mergetool.defaults.trustExitCode true && - test_must_fail git merge master && - git mergetool --no-prompt --tool defaults -- both && - echo master both added >expected && - test_cmp both expected && - git config --unset mergetool.defaults.cmd && - git config --unset mergetool.defaults.trustExitCode && - git reset --hard master >/dev/null 2>&1 + git checkout -b test14 branch1 && + test_config mergetool.defaults.cmd "cat \"\$REMOTE\" >\"\$MERGED\"" && + test_config mergetool.defaults.trustExitCode true && + test_must_fail git merge master && + git mergetool --no-prompt --tool defaults -- both && + echo master both added >expected && + test_cmp both expected && + git reset --hard master >/dev/null 2>&1 +' + +test_expect_success 'filenames seen by tools start with ./' ' + git checkout -b test15 branch1 && + test_config mergetool.writeToTemp false && + test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" && + test_config mergetool.myecho.trustExitCode true && + test_must_fail git merge master && + git mergetool --no-prompt --tool myecho -- both >actual && + grep ^\./both_LOCAL_ actual >/dev/null && + git reset --hard master >/dev/null 2>&1 +' + +test_expect_success 'temporary filenames are used with mergetool.writeToTemp' ' + git checkout -b test16 branch1 && + test_config mergetool.writeToTemp true && + test_config mergetool.myecho.cmd "echo \"\$LOCAL\"" && + test_config mergetool.myecho.trustExitCode true && + test_must_fail git merge master && + git mergetool --no-prompt --tool myecho -- both >actual && + test_must_fail grep ^\./both_LOCAL_ actual >/dev/null && + grep /both_LOCAL_ actual >/dev/null && + git reset --hard master >/dev/null 2>&1 ' test_done diff --git a/t/t7613-merge-submodule.sh b/t/t7613-merge-submodule.sh new file mode 100755 index 0000000000..d1e9fcc781 --- /dev/null +++ b/t/t7613-merge-submodule.sh @@ -0,0 +1,19 @@ +#!/bin/sh + +test_description='merge can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +# merges without conflicts +test_submodule_switch "git merge" + +test_submodule_switch "git merge --ff" + +test_submodule_switch "git merge --ff-only" + +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 +test_submodule_switch "git merge --no-ff" + +test_done diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 61e6ed37aa..021c5479bd 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -21,7 +21,7 @@ test_expect_success 'objects in packs marked .keep are not repacked' ' objsha1=$(git verify-pack -v pack-$packsha1.idx | head -n 1 | sed -e "s/^\([0-9a-f]\{40\}\).*/\1/") && mv pack-* .git/objects/pack/ && - git repack --no-pack-kept-objects -A -d -l && + git repack -A -d -l && git prune-packed && for p in .git/objects/pack/*.idx; do idx=$(basename $p) @@ -53,7 +53,7 @@ test_expect_success 'writing bitmaps via command-line can duplicate .keep object test_expect_success 'writing bitmaps via config can duplicate .keep objects' ' # build on $objsha1, $packsha1, and .keep state from previous - git -c pack.writebitmaps=true repack -Adl && + git -c repack.writebitmaps=true repack -Adl && test_when_finished "found_duplicate_object=" && for p in .git/objects/pack/*.idx; do idx=$(basename $p) diff --git a/t/t7701-repack-unpack-unreachable.sh b/t/t7701-repack-unpack-unreachable.sh index b8d4cdea8c..aad8a9c64d 100755 --- a/t/t7701-repack-unpack-unreachable.sh +++ b/t/t7701-repack-unpack-unreachable.sh @@ -109,4 +109,17 @@ test_expect_success 'do not bother loosening old objects' ' test_must_fail git cat-file -p $obj2 ' +test_expect_success 'keep packed objects found only in index' ' + echo my-unique-content >file && + git add file && + git commit -m "make it reachable" && + git gc && + git reset HEAD^ && + git reflog expire --expire=now --all && + git add file && + test-chmtime =-86400 .git/objects/pack/* && + git gc --prune=1.hour.ago && + git cat-file blob :file +' + test_done diff --git a/t/t7702-repack-cyclic-alternate.sh b/t/t7702-repack-cyclic-alternate.sh new file mode 100755 index 0000000000..93b74867ac --- /dev/null +++ b/t/t7702-repack-cyclic-alternate.sh @@ -0,0 +1,24 @@ +#!/bin/sh +# +# Copyright (c) 2014 Ephrim Khong +# + +test_description='repack involving cyclic alternate' +. ./test-lib.sh + +test_expect_success setup ' + GIT_OBJECT_DIRECTORY=.git//../.git/objects && + export GIT_OBJECT_DIRECTORY && + touch a && + git add a && + git commit -m 1 && + git repack -adl && + echo "$(pwd)"/.git/objects/../objects >.git/objects/info/alternates +' + +test_expect_success 're-packing repository with itsself as alternate' ' + git repack -adl && + git fsck +' + +test_done diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 5a193c500d..ea35a0241c 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -58,7 +58,7 @@ test_expect_success PERL 'custom tool commands override built-ins' ' test_expect_success PERL 'difftool ignores bad --tool values' ' : >expect && - test_expect_code 1 \ + test_must_fail \ git difftool --no-prompt --tool=bad-tool branch >actual && test_cmp expect actual ' @@ -76,6 +76,54 @@ test_expect_success PERL 'difftool forwards arguments to diff' ' rm for-diff ' +test_expect_success PERL 'difftool ignores exit code' ' + test_config difftool.error.cmd false && + git difftool -y -t error branch +' + +test_expect_success PERL 'difftool forwards exit code with --trust-exit-code' ' + test_config difftool.error.cmd false && + test_must_fail git difftool -y --trust-exit-code -t error branch +' + +test_expect_success PERL 'difftool forwards exit code with --trust-exit-code for built-ins' ' + test_config difftool.vimdiff.path false && + test_must_fail git difftool -y --trust-exit-code -t vimdiff branch +' + +test_expect_success PERL 'difftool honors difftool.trustExitCode = true' ' + test_config difftool.error.cmd false && + test_config difftool.trustExitCode true && + test_must_fail git difftool -y -t error branch +' + +test_expect_success PERL 'difftool honors difftool.trustExitCode = false' ' + test_config difftool.error.cmd false && + test_config difftool.trustExitCode false && + git difftool -y -t error branch +' + +test_expect_success PERL 'difftool ignores exit code with --no-trust-exit-code' ' + test_config difftool.error.cmd false && + test_config difftool.trustExitCode true && + git difftool -y --no-trust-exit-code -t error branch +' + +test_expect_success PERL 'difftool stops on error with --trust-exit-code' ' + test_when_finished "rm -f for-diff .git/fail-right-file" && + test_when_finished "git reset -- for-diff" && + write_script .git/fail-right-file <<-\EOF && + echo "$2" + exit 1 + EOF + >for-diff && + git add for-diff && + echo file >expect && + test_must_fail git difftool -y --trust-exit-code \ + --extcmd .git/fail-right-file branch >actual && + test_cmp expect actual +' + test_expect_success PERL 'difftool honors --gui' ' difftool_test_setup && test_config merge.tool bogus-tool && @@ -301,6 +349,14 @@ test_expect_success PERL 'say no to the second file' ' ! grep br2 output ' +test_expect_success PERL 'ending prompt input with EOF' ' + git difftool -x cat branch </dev/null >output && + ! grep master output && + ! grep branch output && + ! grep m2 output && + ! grep br2 output +' + test_expect_success PERL 'difftool --tool-help' ' git difftool --tool-help >output && grep tool output diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 40615debc4..028ffe4a05 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -1202,4 +1202,98 @@ test_expect_success LIBPCRE 'grep -P "^ "' ' test_cmp expected actual ' +cat >expected <<EOF +space-line without leading space1 +space: line <RED>with <RESET>leading space1 +space: line <RED>with <RESET>leading <RED>space2<RESET> +space: line <RED>with <RESET>leading space3 +space:line without leading <RED>space2<RESET> +EOF + +test_expect_success 'grep --color -e A -e B with context' ' + test_config color.grep.context normal && + test_config color.grep.filename normal && + test_config color.grep.function normal && + test_config color.grep.linenumber normal && + test_config color.grep.matchContext normal && + test_config color.grep.matchSelected red && + test_config color.grep.selected normal && + test_config color.grep.separator normal && + + git grep --color=always -C2 -e "with " -e space2 space | + test_decode_color >actual && + test_cmp expected actual +' + +cat >expected <<EOF +space-line without leading space1 +space- line with leading space1 +space: line <RED>with <RESET>leading <RED>space2<RESET> +space- line with leading space3 +space-line without leading space2 +EOF + +test_expect_success 'grep --color -e A --and -e B with context' ' + test_config color.grep.context normal && + test_config color.grep.filename normal && + test_config color.grep.function normal && + test_config color.grep.linenumber normal && + test_config color.grep.matchContext normal && + test_config color.grep.matchSelected red && + test_config color.grep.selected normal && + test_config color.grep.separator normal && + + git grep --color=always -C2 -e "with " --and -e space2 space | + test_decode_color >actual && + test_cmp expected actual +' + +cat >expected <<EOF +space-line without leading space1 +space: line <RED>with <RESET>leading space1 +space- line with leading space2 +space: line <RED>with <RESET>leading space3 +space-line without leading space2 +EOF + +test_expect_success 'grep --color -e A --and --not -e B with context' ' + test_config color.grep.context normal && + test_config color.grep.filename normal && + test_config color.grep.function normal && + test_config color.grep.linenumber normal && + test_config color.grep.matchContext normal && + test_config color.grep.matchSelected red && + test_config color.grep.selected normal && + test_config color.grep.separator normal && + + git grep --color=always -C2 -e "with " --and --not -e space2 space | + test_decode_color >actual && + test_cmp expected actual +' + +cat >expected <<EOF +hello.c-#include <stdio.h> +hello.c=int main(int argc, const char **argv) +hello.c-{ +hello.c: pr<RED>int<RESET>f("<RED>Hello<RESET> world.\n"); +hello.c- return 0; +hello.c- /* char ?? */ +hello.c-} +EOF + +test_expect_success 'grep --color -e A --and -e B -p with context' ' + test_config color.grep.context normal && + test_config color.grep.filename normal && + test_config color.grep.function normal && + test_config color.grep.linenumber normal && + test_config color.grep.matchContext normal && + test_config color.grep.matchSelected red && + test_config color.grep.selected normal && + test_config color.grep.separator normal && + + git grep --color=always -p -C3 -e int --and -e Hello --no-index hello.c | + test_decode_color >actual && + test_cmp expected actual +' + test_done diff --git a/t/t8005-blame-i18n.sh b/t/t8005-blame-i18n.sh index cb390559f9..847d098c09 100755 --- a/t/t8005-blame-i18n.sh +++ b/t/t8005-blame-i18n.sh @@ -33,7 +33,7 @@ author $SJIS_NAME summary $SJIS_MSG EOF -test_expect_success \ +test_expect_success !MINGW \ 'blame respects i18n.commitencoding' ' git blame --incremental file | \ egrep "^(author|summary) " > actual && @@ -49,7 +49,7 @@ author $EUC_JAPAN_NAME summary $EUC_JAPAN_MSG EOF -test_expect_success \ +test_expect_success !MINGW \ 'blame respects i18n.logoutputencoding' ' git config i18n.logoutputencoding eucJP && git blame --incremental file | \ @@ -66,7 +66,7 @@ author $UTF8_NAME summary $UTF8_MSG EOF -test_expect_success \ +test_expect_success !MINGW \ 'blame respects --encoding=UTF-8' ' git blame --incremental --encoding=UTF-8 file | \ egrep "^(author|summary) " > actual && @@ -82,7 +82,7 @@ author $UTF8_NAME summary $UTF8_MSG EOF -test_expect_success \ +test_expect_success !MINGW \ 'blame respects --encoding=none' ' git blame --incremental --encoding=none file | \ egrep "^(author|summary) " > actual && diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 1ecdacb6fd..af6a3e8904 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -6,35 +6,37 @@ test_description='git send-email' # May be altered later in the test PREREQ="PERL" -test_expect_success $PREREQ \ - 'prepare reference tree' \ - 'echo "1A quick brown fox jumps over the" >file && - echo "lazy dog" >>file && - git add file && - GIT_AUTHOR_NAME="A" git commit -a -m "Initial."' - -test_expect_success $PREREQ \ - 'Setup helper tool' \ - '(echo "#!$SHELL_PATH" - echo shift - echo output=1 - echo "while test -f commandline\$output; do output=\$((\$output+1)); done" - echo for a - echo do - echo " echo \"!\$a!\"" - echo "done >commandline\$output" - echo "cat > msgtxt\$output" - ) >fake.sendmail && - chmod +x ./fake.sendmail && - git add fake.sendmail && - GIT_AUTHOR_NAME="A" git commit -a -m "Second."' - -clean_fake_sendmail() { +test_expect_success $PREREQ 'prepare reference tree' ' + echo "1A quick brown fox jumps over the" >file && + echo "lazy dog" >>file && + git add file && + GIT_AUTHOR_NAME="A" git commit -a -m "Initial." +' + +test_expect_success $PREREQ 'Setup helper tool' ' + write_script fake.sendmail <<-\EOF && + shift + output=1 + while test -f commandline$output + do + output=$(($output+1)) + done + for a + do + echo "!$a!" + done >commandline$output + cat >"msgtxt$output" + EOF + git add fake.sendmail && + GIT_AUTHOR_NAME="A" git commit -a -m "Second." +' + +clean_fake_sendmail () { rm -f commandline* msgtxt* } test_expect_success $PREREQ 'Extract patches' ' - patches=`git format-patch -s --cc="One <one@example.com>" --cc=two@example.com -n HEAD^1` + patches=`git format-patch -s --cc="One <one@example.com>" --cc=two@example.com -n HEAD^1` ' # Test no confirm early to ensure remaining tests will not hang @@ -47,9 +49,9 @@ test_no_confirm () { --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ $@ \ - $patches > stdout && + $patches >stdout && test_must_fail grep "Send this email" stdout && - > no_confirm_okay + >no_confirm_okay } # Exit immediately to prevent hang if a no-confirm test fails @@ -82,61 +84,61 @@ test_expect_success $PREREQ 'No confirm with sendemail.confirm=never' ' ' test_expect_success $PREREQ 'Send patches' ' - git send-email --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors + git send-email --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<\EOF -!nobody@example.com! -!author@example.com! -!one@example.com! -!two@example.com! -EOF + cat >expected <<-\EOF + !nobody@example.com! + !author@example.com! + !one@example.com! + !two@example.com! + EOF ' -test_expect_success $PREREQ \ - 'Verify commandline' \ - 'test_cmp expected commandline1' +test_expect_success $PREREQ 'Verify commandline' ' + test_cmp expected commandline1 +' test_expect_success $PREREQ 'Send patches with --envelope-sender' ' - clean_fake_sendmail && - git send-email --envelope-sender="Patch Contributor <patch@example.com>" --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors + clean_fake_sendmail && + git send-email --envelope-sender="Patch Contributor <patch@example.com>" --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<\EOF -!patch@example.com! -!-i! -!nobody@example.com! -!author@example.com! -!one@example.com! -!two@example.com! -EOF + cat >expected <<-\EOF + !patch@example.com! + !-i! + !nobody@example.com! + !author@example.com! + !one@example.com! + !two@example.com! + EOF ' -test_expect_success $PREREQ \ - 'Verify commandline' \ - 'test_cmp expected commandline1' +test_expect_success $PREREQ 'Verify commandline' ' + test_cmp expected commandline1 +' test_expect_success $PREREQ 'Send patches with --envelope-sender=auto' ' - clean_fake_sendmail && - git send-email --envelope-sender=auto --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors + clean_fake_sendmail && + git send-email --envelope-sender=auto --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<\EOF -!nobody@example.com! -!-i! -!nobody@example.com! -!author@example.com! -!one@example.com! -!two@example.com! -EOF + cat >expected <<-\EOF + !nobody@example.com! + !-i! + !nobody@example.com! + !author@example.com! + !one@example.com! + !two@example.com! + EOF ' -test_expect_success $PREREQ \ - 'Verify commandline' \ - 'test_cmp expected commandline1' +test_expect_success $PREREQ 'Verify commandline' ' + test_cmp expected commandline1 +' test_expect_success $PREREQ 'setup expect' " cat >expected-show-all-headers <<\EOF @@ -240,6 +242,13 @@ test_expect_success $PREREQ 'non-ascii self name is suppressed' " 'non_ascii_self_suppressed' " +# This name is long enough to force format-patch to split it into multiple +# encoded-words, assuming it uses UTF-8 with the "Q" encoding. +test_expect_success $PREREQ 'long non-ascii self name is suppressed' " + test_suppress_self_quoted 'Ƒüñníęř €. Nâṁé' 'odd_?=mail@example.com' \ + 'long_non_ascii_self_suppressed' +" + test_expect_success $PREREQ 'sanitized self name is suppressed' " test_suppress_self_unquoted '\"A U. Thor\"' 'author@example.com' \ 'self_name_sanitized_suppressed' @@ -307,11 +316,9 @@ test_expect_success $PREREQ 'tocmd works' ' clean_fake_sendmail && cp $patches tocmd.patch && echo tocmd--tocmd@example.com >>tocmd.patch && - { - echo "#!$SHELL_PATH" - echo sed -n -e s/^tocmd--//p \"\$1\" - } > tocmd-sed && - chmod +x tocmd-sed && + write_script tocmd-sed <<-\EOF && + sed -n -e "s/^tocmd--//p" "$1" + EOF git send-email \ --from="Example <nobody@example.com>" \ --to-cmd=./tocmd-sed \ @@ -325,11 +332,9 @@ test_expect_success $PREREQ 'cccmd works' ' clean_fake_sendmail && cp $patches cccmd.patch && echo "cccmd-- cccmd@example.com" >>cccmd.patch && - { - echo "#!$SHELL_PATH" - echo sed -n -e s/^cccmd--//p \"\$1\" - } > cccmd-sed && - chmod +x cccmd-sed && + write_script cccmd-sed <<-\EOF && + sed -n -e "s/^cccmd--//p" "$1" + EOF git send-email \ --from="Example <nobody@example.com>" \ --to=nobody@example.com \ @@ -367,7 +372,7 @@ test_expect_success $PREREQ 'Author From: in message body' ' --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ $patches && - sed "1,/^\$/d" < msgtxt1 > msgbody1 && + sed "1,/^\$/d" <msgtxt1 >msgbody1 && grep "From: A <author@example.com>" msgbody1 ' @@ -378,7 +383,7 @@ test_expect_success $PREREQ 'Author From: not in message body' ' --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ $patches && - sed "1,/^\$/d" < msgtxt1 > msgbody1 && + sed "1,/^\$/d" <msgtxt1 >msgbody1 && ! grep "From: A <author@example.com>" msgbody1 ' @@ -459,10 +464,9 @@ test_expect_success $PREREQ 'In-Reply-To with --chain-reply-to' ' ' test_expect_success $PREREQ 'setup fake editor' ' - (echo "#!$SHELL_PATH" && - echo "echo fake edit >>\"\$1\"" - ) >fake-editor && - chmod +x fake-editor + write_script fake-editor <<-\EOF + echo fake edit >>"$1" + EOF ' test_set_editor "$(pwd)/fake-editor" @@ -598,8 +602,9 @@ EOF " test_expect_success $PREREQ 'sendemail.cccmd' ' - echo echo cc-cmd@example.com > cccmd && - chmod +x cccmd && + write_script cccmd <<-\EOF && + echo cc-cmd@example.com + EOF git config sendemail.cccmd ./cccmd && test_suppression cccmd ' @@ -792,7 +797,7 @@ test_confirm () { --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ - $@ $patches > stdout && + $@ $patches >stdout && grep "Send this email" stdout } @@ -840,7 +845,7 @@ test_expect_success $PREREQ 'confirm detects EOF (inform assumes y)' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ - outdir/*.patch < /dev/null + outdir/*.patch </dev/null ret="$?" git config sendemail.confirm ${CONFIRM:-never} test $ret = "0" @@ -855,7 +860,7 @@ test_expect_success $PREREQ 'confirm detects EOF (auto causes failure)' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ - $patches < /dev/null + $patches </dev/null ret="$?" git config sendemail.confirm ${CONFIRM:-never} test $ret = "0" @@ -891,39 +896,39 @@ test_expect_success $PREREQ 'utf8 Cc is rfc2047 encoded' ' test_expect_success $PREREQ '--compose adds MIME for utf8 body' ' clean_fake_sendmail && - (echo "#!$SHELL_PATH" && - echo "echo utf8 body: àéìöú >>\"\$1\"" - ) >fake-editor-utf8 && - chmod +x fake-editor-utf8 && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ - git send-email \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8 <<-\EOF && + echo "utf8 body: àéìöú" >>"$1" + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ + git send-email \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=UTF-8" msgtxt1 ' test_expect_success $PREREQ '--compose respects user mime type' ' clean_fake_sendmail && - (echo "#!$SHELL_PATH" && - echo "(echo MIME-Version: 1.0" - echo " echo Content-Type: text/plain\\; charset=iso-8859-1" - echo " echo Content-Transfer-Encoding: 8bit" - echo " echo Subject: foo" - echo " echo " - echo " echo utf8 body: àéìöú) >\"\$1\"" - ) >fake-editor-utf8-mime && - chmod +x fake-editor-utf8-mime && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8-mime\"" \ - git send-email \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8-mime <<-\EOF && + cat >"$1" <<-\EOM + MIME-Version: 1.0 + Content-Type: text/plain; charset=iso-8859-1 + Content-Transfer-Encoding: 8bit + Subject: foo + + utf8 body: àéìöú + EOM + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8-mime\"" \ + git send-email \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=iso-8859-1" msgtxt1 && ! grep "^Content-Type: text/plain; charset=UTF-8" msgtxt1 @@ -931,13 +936,13 @@ test_expect_success $PREREQ '--compose respects user mime type' ' test_expect_success $PREREQ '--compose adds MIME for utf8 subject' ' clean_fake_sendmail && - GIT_EDITOR="\"$(pwd)/fake-editor\"" \ - git send-email \ - --compose --subject utf8-sübjëct \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + GIT_EDITOR="\"$(pwd)/fake-editor\"" \ + git send-email \ + --compose --subject utf8-sübjëct \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^fake edit" msgtxt1 && grep "^Subject: =?UTF-8?q?utf8-s=C3=BCbj=C3=ABct?=" msgtxt1 ' @@ -949,9 +954,9 @@ test_expect_success $PREREQ 'utf8 author is correctly passed on' ' git commit --amend --author "Füñný Nâmé <odd_?=mail@example.com>" && git format-patch --stdout -1 >funny_name.patch && git send-email --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - funny_name.patch && + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + funny_name.patch && grep "^From: Füñný Nâmé <odd_?=mail@example.com>" msgtxt1 ' @@ -962,9 +967,9 @@ test_expect_success $PREREQ 'utf8 sender is not duplicated' ' git commit --amend --author "Füñný Nâmé <odd_?=mail@example.com>" && git format-patch --stdout -1 >funny_name.patch && git send-email --from="Füñný Nâmé <odd_?=mail@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - funny_name.patch && + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + funny_name.patch && grep "^From: " msgtxt1 >msgfrom && test_line_count = 1 msgfrom ' @@ -972,35 +977,33 @@ test_expect_success $PREREQ 'utf8 sender is not duplicated' ' test_expect_success $PREREQ 'sendemail.composeencoding works' ' clean_fake_sendmail && git config sendemail.composeencoding iso-8859-1 && - (echo "#!$SHELL_PATH" && - echo "echo utf8 body: àéìöú >>\"\$1\"" - ) >fake-editor-utf8 && - chmod +x fake-editor-utf8 && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ - git send-email \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8 <<-\EOF && + echo "utf8 body: àéìöú" >>"$1" + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ + git send-email \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=iso-8859-1" msgtxt1 ' test_expect_success $PREREQ '--compose-encoding works' ' clean_fake_sendmail && - (echo "#!$SHELL_PATH" && - echo "echo utf8 body: àéìöú >>\"\$1\"" - ) >fake-editor-utf8 && - chmod +x fake-editor-utf8 && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ - git send-email \ - --compose-encoding iso-8859-1 \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8 <<-\EOF && + echo "utf8 body: àéìöú" >>"$1" + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ + git send-email \ + --compose-encoding iso-8859-1 \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=iso-8859-1" msgtxt1 ' @@ -1008,38 +1011,37 @@ test_expect_success $PREREQ '--compose-encoding works' ' test_expect_success $PREREQ '--compose-encoding overrides sendemail.composeencoding' ' clean_fake_sendmail && git config sendemail.composeencoding iso-8859-1 && - (echo "#!$SHELL_PATH" && - echo "echo utf8 body: àéìöú >>\"\$1\"" - ) >fake-editor-utf8 && - chmod +x fake-editor-utf8 && - GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ - git send-email \ - --compose-encoding iso-8859-2 \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + write_script fake-editor-utf8 <<-\EOF && + echo "utf8 body: àéìöú" >>"$1" + EOF + GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ + git send-email \ + --compose-encoding iso-8859-2 \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^utf8 body" msgtxt1 && grep "^Content-Type: text/plain; charset=iso-8859-2" msgtxt1 ' test_expect_success $PREREQ '--compose-encoding adds correct MIME for subject' ' clean_fake_sendmail && - GIT_EDITOR="\"$(pwd)/fake-editor\"" \ - git send-email \ - --compose-encoding iso-8859-2 \ - --compose --subject utf8-sübjëct \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches && + GIT_EDITOR="\"$(pwd)/fake-editor\"" \ + git send-email \ + --compose-encoding iso-8859-2 \ + --compose --subject utf8-sübjëct \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && grep "^fake edit" msgtxt1 && grep "^Subject: =?iso-8859-2?q?utf8-s=C3=BCbj=C3=ABct?=" msgtxt1 ' test_expect_success $PREREQ 'detects ambiguous reference/file conflict' ' - echo master > master && + echo master >master && git add master && git commit -m"add master" && test_must_fail git send-email --dry-run master 2>errors && @@ -1050,10 +1052,10 @@ test_expect_success $PREREQ 'feed two files' ' rm -fr outdir && git format-patch -2 -o outdir && git send-email \ - --dry-run \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - outdir/000?-*.patch 2>errors >out && + --dry-run \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + outdir/000?-*.patch 2>errors >out && grep "^Subject: " out >subjects && test "z$(sed -n -e 1p subjects)" = "zSubject: [PATCH 1/2] Second." && test "z$(sed -n -e 2p subjects)" = "zSubject: [PATCH 2/2] add master" @@ -1197,7 +1199,7 @@ test_expect_success $PREREQ 'To headers from files reset each patch' ' ' test_expect_success $PREREQ 'setup expect' ' -cat >email-using-8bit <<EOF +cat >email-using-8bit <<\EOF From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 Message-Id: <bogus-message-id@example.com> From: author@example.com @@ -1209,9 +1211,7 @@ EOF ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<EOF -Subject: subject goes here -EOF + echo "Subject: subject goes here" >expected ' test_expect_success $PREREQ 'ASCII subject is not RFC2047 quoted' ' @@ -1226,11 +1226,11 @@ test_expect_success $PREREQ 'ASCII subject is not RFC2047 quoted' ' ' test_expect_success $PREREQ 'setup expect' ' -cat >content-type-decl <<EOF -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -EOF + cat >content-type-decl <<-\EOF + MIME-Version: 1.0 + Content-Type: text/plain; charset=UTF-8 + Content-Transfer-Encoding: 8bit + EOF ' test_expect_success $PREREQ 'asks about and fixes 8bit encodings' ' @@ -1270,21 +1270,21 @@ test_expect_success $PREREQ '--8bit-encoding overrides sendemail.8bitEncoding' ' ' test_expect_success $PREREQ 'setup expect' ' -cat >email-using-8bit <<EOF -From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 -Message-Id: <bogus-message-id@example.com> -From: author@example.com -Date: Sat, 12 Jun 2010 15:53:58 +0200 -Subject: Dieser Betreff enthält auch einen Umlaut! - -Nothing to see here. -EOF + cat >email-using-8bit <<-\EOF + From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 + Message-Id: <bogus-message-id@example.com> + From: author@example.com + Date: Sat, 12 Jun 2010 15:53:58 +0200 + Subject: Dieser Betreff enthält auch einen Umlaut! + + Nothing to see here. + EOF ' test_expect_success $PREREQ 'setup expect' ' -cat >expected <<EOF -Subject: =?UTF-8?q?Dieser=20Betreff=20enth=C3=A4lt=20auch=20einen=20Umlaut!?= -EOF + cat >expected <<-\EOF + Subject: =?UTF-8?q?Dieser=20Betreff=20enth=C3=A4lt=20auch=20einen=20Umlaut!?= + EOF ' test_expect_success $PREREQ '--8bit-encoding also treats subject' ' @@ -1298,6 +1298,163 @@ test_expect_success $PREREQ '--8bit-encoding also treats subject' ' test_cmp expected actual ' +test_expect_success $PREREQ 'setup expect' ' + cat >email-using-8bit <<-\EOF + From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 + Message-Id: <bogus-message-id@example.com> + From: A U Thor <author@example.com> + Date: Sat, 12 Jun 2010 15:53:58 +0200 + Content-Type: text/plain; charset=UTF-8 + Subject: Nothing to see here. + + Dieser Betreff enthält auch einen Umlaut! + EOF +' + +test_expect_success $PREREQ 'sendemail.transferencoding=7bit fails on 8bit data' ' + clean_fake_sendmail && + git config sendemail.transferEncoding 7bit && + test_must_fail git send-email \ + --transfer-encoding=7bit \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + grep "cannot send message as 7bit" errors && + test -z "$(ls msgtxt*)" +' + +test_expect_success $PREREQ '--transfer-encoding overrides sendemail.transferEncoding' ' + clean_fake_sendmail && + git config sendemail.transferEncoding 8bit + test_must_fail git send-email \ + --transfer-encoding=7bit \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + grep "cannot send message as 7bit" errors && + test -z "$(ls msgtxt*)" +' + +test_expect_success $PREREQ 'sendemail.transferencoding=8bit' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=8bit \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + sed '1,/^$/d' email-using-8bit >expected && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' ' + cat >expected <<-\EOF + Dieser Betreff enth=C3=A4lt auch einen Umlaut! + EOF +' + +test_expect_success $PREREQ '8-bit and sendemail.transferencoding=quoted-printable' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=quoted-printable \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' ' + cat >expected <<-\EOF + RGllc2VyIEJldHJlZmYgZW50aMOkbHQgYXVjaCBlaW5lbiBVbWxhdXQhCg== + EOF +' + +test_expect_success $PREREQ '8-bit and sendemail.transferencoding=base64' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=base64 \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-8bit \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' ' + cat >email-using-qp <<-\EOF + From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 + Message-Id: <bogus-message-id@example.com> + From: A U Thor <author@example.com> + Date: Sat, 12 Jun 2010 15:53:58 +0200 + MIME-Version: 1.0 + Content-Transfer-Encoding: quoted-printable + Content-Type: text/plain; charset=UTF-8 + Subject: Nothing to see here. + + Dieser Betreff enth=C3=A4lt auch einen Umlaut! + EOF +' + +test_expect_success $PREREQ 'convert from quoted-printable to base64' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=base64 \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-qp \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' " +tr -d '\\015' | tr '%' '\\015' >email-using-crlf <<EOF +From fe6ecc66ece37198fe5db91fa2fc41d9f4fe5cc4 Mon Sep 17 00:00:00 2001 +Message-Id: <bogus-message-id@example.com> +From: A U Thor <author@example.com> +Date: Sat, 12 Jun 2010 15:53:58 +0200 +Content-Type: text/plain; charset=UTF-8 +Subject: Nothing to see here. + +Look, I have a CRLF and an = sign!% +EOF +" + +test_expect_success $PREREQ 'setup expect' ' + cat >expected <<-\EOF + Look, I have a CRLF and an =3D sign!=0D + EOF +' + +test_expect_success $PREREQ 'CRLF and sendemail.transferencoding=quoted-printable' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=quoted-printable \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-crlf \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + +test_expect_success $PREREQ 'setup expect' ' + cat >expected <<-\EOF + TG9vaywgSSBoYXZlIGEgQ1JMRiBhbmQgYW4gPSBzaWduIQ0K + EOF +' + +test_expect_success $PREREQ 'CRLF and sendemail.transferencoding=base64' ' + clean_fake_sendmail && + git send-email \ + --transfer-encoding=base64 \ + --smtp-server="$(pwd)/fake.sendmail" \ + email-using-crlf \ + 2>errors >out && + sed '1,/^$/d' msgtxt1 >actual && + test_cmp expected actual +' + + # Note that the patches in this test are deliberately out of order; we # want to make sure it works even if the cover-letter is not in the # first mail. @@ -1306,13 +1463,13 @@ test_expect_success $PREREQ 'refusing to send cover letter template' ' rm -fr outdir && git format-patch --cover-letter -2 -o outdir && test_must_fail git send-email \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0002-*.patch \ - outdir/0000-*.patch \ - outdir/0001-*.patch \ - 2>errors >out && + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0002-*.patch \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + 2>errors >out && grep "SUBJECT HERE" errors && test -z "$(ls msgtxt*)" ' @@ -1322,29 +1479,74 @@ test_expect_success $PREREQ '--force sends cover letter template anyway' ' rm -fr outdir && git format-patch --cover-letter -2 -o outdir && git send-email \ - --force \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0002-*.patch \ - outdir/0000-*.patch \ - outdir/0001-*.patch \ - 2>errors >out && + --force \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0002-*.patch \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + 2>errors >out && ! grep "SUBJECT HERE" errors && test -n "$(ls msgtxt*)" ' +test_cover_addresses () { + header="$1" + shift + clean_fake_sendmail && + rm -fr outdir && + git format-patch --cover-letter -2 -o outdir && + cover=`echo outdir/0000-*.patch` && + mv $cover cover-to-edit.patch && + perl -pe "s/^From:/$header: extra\@address.com\nFrom:/" cover-to-edit.patch >"$cover" && + git send-email \ + --force \ + --from="Example <nobody@example.com>" \ + --no-to --no-cc \ + "$@" \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + outdir/0002-*.patch \ + 2>errors >out && + grep "^$header: extra@address.com" msgtxt1 >to1 && + grep "^$header: extra@address.com" msgtxt2 >to2 && + grep "^$header: extra@address.com" msgtxt3 >to3 && + test_line_count = 1 to1 && + test_line_count = 1 to2 && + test_line_count = 1 to3 +} + +test_expect_success $PREREQ 'to-cover adds To to all mail' ' + test_cover_addresses "To" --to-cover +' + +test_expect_success $PREREQ 'cc-cover adds Cc to all mail' ' + test_cover_addresses "Cc" --cc-cover +' + +test_expect_success $PREREQ 'tocover adds To to all mail' ' + test_config sendemail.tocover true && + test_cover_addresses "To" +' + +test_expect_success $PREREQ 'cccover adds Cc to all mail' ' + test_config sendemail.cccover true && + test_cover_addresses "Cc" +' + test_expect_success $PREREQ 'sendemail.aliasfiletype=mailrc' ' clean_fake_sendmail && echo "alias sbd somebody@example.org" >.mailrc && git config --replace-all sendemail.aliasesfile "$(pwd)/.mailrc" && git config sendemail.aliasfiletype mailrc && git send-email \ - --from="Example <nobody@example.com>" \ - --to=sbd \ - --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0001-*.patch \ - 2>errors >out && + --from="Example <nobody@example.com>" \ + --to=sbd \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0001-*.patch \ + 2>errors >out && grep "^!somebody@example\.org!$" commandline1 ' @@ -1354,12 +1556,45 @@ test_expect_success $PREREQ 'sendemail.aliasfile=~/.mailrc' ' git config --replace-all sendemail.aliasesfile "~/.mailrc" && git config sendemail.aliasfiletype mailrc && git send-email \ - --from="Example <nobody@example.com>" \ - --to=sbd \ - --smtp-server="$(pwd)/fake.sendmail" \ - outdir/0001-*.patch \ - 2>errors >out && + --from="Example <nobody@example.com>" \ + --to=sbd \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0001-*.patch \ + 2>errors >out && grep "^!someone@example\.org!$" commandline1 ' +do_xmailer_test () { + expected=$1 params=$2 && + git format-patch -1 && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=someone@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $params \ + 0001-*.patch \ + 2>errors >out && + { grep '^X-Mailer:' out || :; } >mailer && + test_line_count = $expected mailer +} + +test_expect_success $PREREQ '--[no-]xmailer without any configuration' ' + do_xmailer_test 1 "--xmailer" && + do_xmailer_test 0 "--no-xmailer" +' + +test_expect_success $PREREQ '--[no-]xmailer with sendemail.xmailer=true' ' + test_config sendemail.xmailer true && + do_xmailer_test 1 "" && + do_xmailer_test 0 "--no-xmailer" && + do_xmailer_test 1 "--xmailer" +' + +test_expect_success $PREREQ '--[no-]xmailer with sendemail.xmailer=false' ' + test_config sendemail.xmailer false && + do_xmailer_test 0 "" && + do_xmailer_test 0 "--no-xmailer" && + do_xmailer_test 1 "--xmailer" +' + test_done diff --git a/t/t9119-git-svn-info.sh b/t/t9119-git-svn-info.sh index ff19695e77..f16f3234a1 100755 --- a/t/t9119-git-svn-info.sh +++ b/t/t9119-git-svn-info.sh @@ -74,6 +74,36 @@ test_expect_success 'info .' " test_cmp_info expected.info-dot actual.info-dot " +test_expect_success 'info $(pwd)' ' + (cd svnwc; svn info "$(pwd)") >expected.info-pwd && + (cd gitwc; git svn info "$(pwd)") >actual.info-pwd && + grep -v ^Path: <expected.info-pwd >expected.info-np && + grep -v ^Path: <actual.info-pwd >actual.info-np && + test_cmp_info expected.info-np actual.info-np && + test "$(sed -ne \"/^Path:/ s!/svnwc!!\" <expected.info-pwd)" = \ + "$(sed -ne \"/^Path:/ s!/gitwc!!\" <actual.info-pwd)" + ' + +test_expect_success 'info $(pwd)/../___wc' ' + (cd svnwc; svn info "$(pwd)/../svnwc") >expected.info-pwd && + (cd gitwc; git svn info "$(pwd)/../gitwc") >actual.info-pwd && + grep -v ^Path: <expected.info-pwd >expected.info-np && + grep -v ^Path: <actual.info-pwd >actual.info-np && + test_cmp_info expected.info-np actual.info-np && + test "$(sed -ne \"/^Path:/ s!/svnwc!!\" <expected.info-pwd)" = \ + "$(sed -ne \"/^Path:/ s!/gitwc!!\" <actual.info-pwd)" + ' + +test_expect_success 'info $(pwd)/../___wc//file' ' + (cd svnwc; svn info "$(pwd)/../svnwc//file") >expected.info-pwd && + (cd gitwc; git svn info "$(pwd)/../gitwc//file") >actual.info-pwd && + grep -v ^Path: <expected.info-pwd >expected.info-np && + grep -v ^Path: <actual.info-pwd >actual.info-np && + test_cmp_info expected.info-np actual.info-np && + test "$(sed -ne \"/^Path:/ s!/svnwc!!\" <expected.info-pwd)" = \ + "$(sed -ne \"/^Path:/ s!/gitwc!!\" <actual.info-pwd)" + ' + test_expect_success 'info --url .' ' test "$(cd gitwc; git svn info --url .)" = "$quoted_svnrepo" ' diff --git a/t/t9138-git-svn-authors-prog.sh b/t/t9138-git-svn-authors-prog.sh index 83cc5fc9d1..2937f4c265 100755 --- a/t/t9138-git-svn-authors-prog.sh +++ b/t/t9138-git-svn-authors-prog.sh @@ -7,40 +7,39 @@ test_description='git svn authors prog tests' . ./lib-git-svn.sh -cat > svn-authors-prog <<'EOF' -#!/usr/bin/perl -$_ = shift; -if (s/-sub$//) { - print "$_ <$_\@sub.example.com>\n"; -} -else { - print "$_ <$_\@example.com>\n"; -} +write_script svn-authors-prog "$PERL_PATH" <<-\EOF + $_ = shift; + if (s/-sub$//) { + print "$_ <$_\@sub.example.com>\n"; + } else { + print "$_ <$_\@example.com>\n"; + } EOF -chmod +x svn-authors-prog -cat > svn-authors <<'EOF' -ff = FFFFFFF FFFFFFF <fFf@other.example.com> -EOF +test_expect_success 'svn-authors setup' ' + cat >svn-authors <<-\EOF + ff = FFFFFFF FFFFFFF <fFf@other.example.com> + EOF +' test_expect_success 'setup svnrepo' ' for i in aa bb cc-sub dd-sub ee-foo ff do svn mkdir -m $i --username $i "$svnrepo"/$i done - ' +' test_expect_success 'import authors with prog and file' ' git svn clone --authors-prog=./svn-authors-prog \ --authors-file=svn-authors "$svnrepo" x - ' +' test_expect_success 'imported 6 revisions successfully' ' ( cd x test "`git rev-list refs/remotes/git-svn | wc -l`" -eq 6 ) - ' +' test_expect_success 'authors-prog ran correctly' ' ( @@ -56,7 +55,7 @@ test_expect_success 'authors-prog ran correctly' ' git rev-list -1 --pretty=raw refs/remotes/git-svn~5 | \ grep "^author aa <aa@example\.com> " ) - ' +' test_expect_success 'authors-file overrode authors-prog' ' ( @@ -64,7 +63,7 @@ test_expect_success 'authors-file overrode authors-prog' ' git rev-list -1 --pretty=raw refs/remotes/git-svn | \ grep "^author FFFFFFF FFFFFFF <fFf@other\.example\.com> " ) - ' +' git --git-dir=x/.git config --unset svn.authorsfile git --git-dir=x/.git config --unset svn.authorsprog diff --git a/t/t9148-git-svn-propset.sh b/t/t9148-git-svn-propset.sh new file mode 100755 index 0000000000..102639090c --- /dev/null +++ b/t/t9148-git-svn-propset.sh @@ -0,0 +1,95 @@ +#!/bin/sh +# +# Copyright (c) 2014 Alfred Perlstein +# + +test_description='git svn propset tests' + +. ./lib-git-svn.sh + +foo_subdir2="subdir/subdir2/foo_subdir2" + +set -e +mkdir import && +(set -e ; cd import + mkdir subdir + mkdir subdir/subdir2 + touch foo # for 'add props top level' + touch subdir/foo_subdir # for 'add props relative' + touch "$foo_subdir2" # for 'add props subdir' + svn_cmd import -m 'import for git svn' . "$svnrepo" >/dev/null +) +rm -rf import + +test_expect_success 'initialize git svn' ' + git svn init "$svnrepo" + ' + +test_expect_success 'fetch revisions from svn' ' + git svn fetch + ' + +set_props () { + subdir="$1" + file="$2" + shift;shift; + (cd "$subdir" && + while [ $# -gt 0 ] ; do + git svn propset "$1" "$2" "$file" || exit 1 + shift;shift; + done && + echo hello >> "$file" && + git commit -m "testing propset" "$file") +} + +confirm_props () { + subdir="$1" + file="$2" + shift;shift; + (set -e ; cd "svn_project/$subdir" && + while [ $# -gt 0 ] ; do + test "$(svn_cmd propget "$1" "$file")" = "$2" || exit 1 + shift;shift; + done) +} + + +#The current implementation has a restriction: +#svn propset will be taken as a delta for svn dcommit only +#if the file content is also modified +test_expect_success 'add props top level' ' + set_props "." "foo" "svn:keywords" "FreeBSD=%H" && + git svn dcommit && + svn_cmd co "$svnrepo" svn_project && + confirm_props "." "foo" "svn:keywords" "FreeBSD=%H" && + rm -rf svn_project + ' + +test_expect_success 'add multiple props' ' + set_props "." "foo" \ + "svn:keywords" "FreeBSD=%H" fbsd:nokeywords yes && + git svn dcommit && + svn_cmd co "$svnrepo" svn_project && + confirm_props "." "foo" \ + "svn:keywords" "FreeBSD=%H" fbsd:nokeywords yes && + rm -rf svn_project + ' + +test_expect_success 'add props subdir' ' + set_props "." "$foo_subdir2" svn:keywords "FreeBSD=%H" && + git svn dcommit && + svn_cmd co "$svnrepo" svn_project && + confirm_props "." "$foo_subdir2" "svn:keywords" "FreeBSD=%H" && + rm -rf svn_project + ' + +test_expect_success 'add props relative' ' + set_props "subdir/subdir2" "../foo_subdir" \ + svn:keywords "FreeBSD=%H" && + git svn dcommit && + svn_cmd co "$svnrepo" svn_project && + confirm_props "subdir/subdir2" "../foo_subdir" \ + svn:keywords "FreeBSD=%H" && + rm -rf svn_project + ' +test_done diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 27263dfb80..37c2d633f0 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -347,36 +347,6 @@ test_expect_success 'B: fail on invalid blob sha1' ' rm -f .git/objects/pack_* .git/objects/index_* cat >input <<INPUT_END -commit .badbranchname -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -corrupt -COMMIT - -from refs/heads/master - -INPUT_END -test_expect_success 'B: fail on invalid branch name ".badbranchname"' ' - test_must_fail git fast-import <input -' -rm -f .git/objects/pack_* .git/objects/index_* - -cat >input <<INPUT_END -commit bad[branch]name -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -corrupt -COMMIT - -from refs/heads/master - -INPUT_END -test_expect_success 'B: fail on invalid branch name "bad[branch]name"' ' - test_must_fail git fast-import <input -' -rm -f .git/objects/pack_* .git/objects/index_* - -cat >input <<INPUT_END commit TEMP_TAG committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE data <<COMMIT @@ -2336,7 +2306,7 @@ test_expect_success 'R: cat-blob-fd must be a nonnegative integer' ' test_must_fail git fast-import --cat-blob-fd=-1 </dev/null ' -test_expect_success NOT_MINGW 'R: print old blob' ' +test_expect_success !MINGW 'R: print old blob' ' blob=$(echo "yes it can" | git hash-object -w --stdin) && cat >expect <<-EOF && ${blob} blob 11 @@ -2348,7 +2318,7 @@ test_expect_success NOT_MINGW 'R: print old blob' ' test_cmp expect actual ' -test_expect_success NOT_MINGW 'R: in-stream cat-blob-fd not respected' ' +test_expect_success !MINGW 'R: in-stream cat-blob-fd not respected' ' echo hello >greeting && blob=$(git hash-object -w greeting) && cat >expect <<-EOF && @@ -2369,7 +2339,7 @@ test_expect_success NOT_MINGW 'R: in-stream cat-blob-fd not respected' ' test_cmp expect actual.1 ' -test_expect_success NOT_MINGW 'R: print new blob' ' +test_expect_success !MINGW 'R: print new blob' ' blob=$(echo "yep yep yep" | git hash-object --stdin) && cat >expect <<-EOF && ${blob} blob 12 @@ -2387,7 +2357,7 @@ test_expect_success NOT_MINGW 'R: print new blob' ' test_cmp expect actual ' -test_expect_success NOT_MINGW 'R: print new blob by sha1' ' +test_expect_success !MINGW 'R: print new blob by sha1' ' blob=$(echo "a new blob named by sha1" | git hash-object --stdin) && cat >expect <<-EOF && ${blob} blob 25 @@ -2687,7 +2657,7 @@ test_expect_success 'R: verify created pack' ' test_expect_success \ 'R: verify written objects' \ 'git --git-dir=R/.git cat-file blob big-file:big1 >actual && - test_cmp expect actual && + test_cmp_bin expect actual && a=$(git --git-dir=R/.git rev-parse big-file:big1) && b=$(git --git-dir=R/.git rev-parse big-file:big2) && test $a = $b' @@ -2866,7 +2836,7 @@ test_expect_success 'S: notemodify with garbage after sha1 dataref must fail' ' # # notemodify, mark in commit-ish # -test_expect_success 'S: notemodify with garbarge after mark commit-ish must fail' ' +test_expect_success 'S: notemodify with garbage after mark commit-ish must fail' ' test_must_fail git fast-import --import-marks=marks <<-EOF 2>err && commit refs/heads/Snotes committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE @@ -2999,4 +2969,126 @@ test_expect_success 'T: ls root tree' ' test_cmp expect actual ' +test_expect_success 'T: delete branch' ' + git branch to-delete && + git fast-import <<-EOF && + reset refs/heads/to-delete + from 0000000000000000000000000000000000000000 + EOF + test_must_fail git rev-parse --verify refs/heads/to-delete +' + +test_expect_success 'T: empty reset doesnt delete branch' ' + git branch not-to-delete && + git fast-import <<-EOF && + reset refs/heads/not-to-delete + EOF + git show-ref && + git rev-parse --verify refs/heads/not-to-delete +' + +### +### series U (filedelete) +### + +cat >input <<INPUT_END +commit refs/heads/U +committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE +data <<COMMIT +test setup +COMMIT +M 100644 inline hello.c +data <<BLOB +blob 1 +BLOB +M 100644 inline good/night.txt +data <<BLOB +sleep well +BLOB +M 100644 inline good/bye.txt +data <<BLOB +au revoir +BLOB + +INPUT_END + +test_expect_success 'U: initialize for U tests' ' + git fast-import <input +' + +cat >input <<INPUT_END +commit refs/heads/U +committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE +data <<COMMIT +delete good/night.txt +COMMIT +from refs/heads/U^0 +D good/night.txt + +INPUT_END + +test_expect_success 'U: filedelete file succeeds' ' + git fast-import <input +' + +cat >expect <<EOF +:100644 000000 2907ebb4bf85d91bf0716bb3bd8a68ef48d6da76 0000000000000000000000000000000000000000 D good/night.txt +EOF + +git diff-tree -M -r U^1 U >actual + +test_expect_success 'U: validate file delete result' ' + compare_diff_raw expect actual +' + +cat >input <<INPUT_END +commit refs/heads/U +committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE +data <<COMMIT +delete good dir +COMMIT +from refs/heads/U^0 +D good + +INPUT_END + +test_expect_success 'U: filedelete directory succeeds' ' + git fast-import <input +' + +cat >expect <<EOF +:100644 000000 69cb75792f55123d8389c156b0b41c2ff00ed507 0000000000000000000000000000000000000000 D good/bye.txt +EOF + +git diff-tree -M -r U^1 U >actual + +test_expect_success 'U: validate directory delete result' ' + compare_diff_raw expect actual +' + +cat >input <<INPUT_END +commit refs/heads/U +committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE +data <<COMMIT +must succeed +COMMIT +from refs/heads/U^0 +D "" + +INPUT_END + +test_expect_success 'U: filedelete root succeeds' ' + git fast-import <input +' + +cat >expect <<EOF +:100644 000000 c18147dc648481eeb65dc5e66628429a64843327 0000000000000000000000000000000000000000 D hello.c +EOF + +git diff-tree -M -r U^1 U >actual + +test_expect_success 'U: validate root delete result' ' + compare_diff_raw expect actual +' + test_done diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 2312dec8f0..66c8b0a371 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -504,4 +504,22 @@ test_expect_success 'refs are updated even if no commits need to be exported' ' test_cmp expected actual ' +test_expect_success 'use refspec' ' + git fast-export --refspec refs/heads/master:refs/heads/foobar master | \ + grep "^commit " | sort | uniq > actual && + echo "commit refs/heads/foobar" > expected && + test_cmp expected actual +' + +test_expect_success 'delete refspec' ' + git branch to-delete && + git fast-export --refspec :refs/heads/to-delete to-delete ^to-delete > actual && + cat > expected <<-EOF && + reset refs/heads/to-delete + from 0000000000000000000000000000000000000000 + + EOF + test_cmp expected actual +' + test_done diff --git a/t/t9351-fast-export-anonymize.sh b/t/t9351-fast-export-anonymize.sh new file mode 100755 index 0000000000..897dc50907 --- /dev/null +++ b/t/t9351-fast-export-anonymize.sh @@ -0,0 +1,112 @@ +#!/bin/sh + +test_description='basic tests for fast-export --anonymize' +. ./test-lib.sh + +test_expect_success 'setup simple repo' ' + test_commit base && + test_commit foo && + git checkout -b other HEAD^ && + mkdir subdir && + test_commit subdir/bar && + test_commit subdir/xyzzy && + git tag -m "annotated tag" mytag +' + +test_expect_success 'export anonymized stream' ' + git fast-export --anonymize --all >stream +' + +# this also covers commit messages +test_expect_success 'stream omits path names' ' + ! grep base stream && + ! grep foo stream && + ! grep subdir stream && + ! grep bar stream && + ! grep xyzzy stream +' + +test_expect_success 'stream allows master as refname' ' + grep master stream +' + +test_expect_success 'stream omits other refnames' ' + ! grep other stream && + ! grep mytag stream +' + +test_expect_success 'stream omits identities' ' + ! grep "$GIT_COMMITTER_NAME" stream && + ! grep "$GIT_COMMITTER_EMAIL" stream && + ! grep "$GIT_AUTHOR_NAME" stream && + ! grep "$GIT_AUTHOR_EMAIL" stream +' + +test_expect_success 'stream omits tag message' ' + ! grep "annotated tag" stream +' + +# NOTE: we chdir to the new, anonymized repository +# after this. All further tests should assume this. +test_expect_success 'import stream to new repository' ' + git init new && + cd new && + git fast-import <../stream +' + +test_expect_success 'result has two branches' ' + git for-each-ref --format="%(refname)" refs/heads >branches && + test_line_count = 2 branches && + other_branch=$(grep -v refs/heads/master branches) +' + +test_expect_success 'repo has original shape and timestamps' ' + shape () { + git log --format="%m %ct" --left-right --boundary "$@" + } && + (cd .. && shape master...other) >expect && + shape master...$other_branch >actual && + test_cmp expect actual +' + +test_expect_success 'root tree has original shape' ' + # the output entries are not necessarily in the same + # order, but we know at least that we will have one tree + # and one blob, so just check the sorted order + cat >expect <<-\EOF && + blob + tree + EOF + git ls-tree $other_branch >root && + cut -d" " -f2 <root | sort >actual && + test_cmp expect actual +' + +test_expect_success 'paths in subdir ended up in one tree' ' + cat >expect <<-\EOF && + blob + blob + EOF + tree=$(grep tree root | cut -f2) && + git ls-tree $other_branch:$tree >tree && + cut -d" " -f2 <tree >actual && + test_cmp expect actual +' + +test_expect_success 'tag points to branch tip' ' + git rev-parse $other_branch >expect && + git for-each-ref --format="%(*objectname)" | grep . >actual && + test_cmp expect actual +' + +test_expect_success 'idents are shared' ' + git log --all --format="%an <%ae>" >authors && + sort -u authors >unique && + test_line_count = 1 unique && + git log --all --format="%cn <%ce>" >committers && + sort -u committers >unique && + test_line_count = 1 unique && + ! test_cmp authors committers +' + +test_done diff --git a/t/t9603-cvsimport-patchsets.sh b/t/t9603-cvsimport-patchsets.sh index 52034c8f77..c4c3c49546 100755 --- a/t/t9603-cvsimport-patchsets.sh +++ b/t/t9603-cvsimport-patchsets.sh @@ -16,7 +16,7 @@ test_description='git cvsimport testing for correct patchset estimation' setup_cvs_test_repository t9603 -test_expect_failure 'import with criss cross times on revisions' ' +test_expect_failure PERL 'import with criss cross times on revisions' ' git cvsimport -p"-x" -C module-git module && (cd module-git && diff --git a/t/t9604-cvsimport-timestamps.sh b/t/t9604-cvsimport-timestamps.sh index 1fd51423ee..a4b3db24bd 100755 --- a/t/t9604-cvsimport-timestamps.sh +++ b/t/t9604-cvsimport-timestamps.sh @@ -5,7 +5,7 @@ test_description='git cvsimport timestamps' setup_cvs_test_repository t9604 -test_expect_success 'check timestamps are UTC (TZ=CST6CDT)' ' +test_expect_success PERL 'check timestamps are UTC (TZ=CST6CDT)' ' TZ=CST6CDT git cvsimport -p"-x" -C module-1 module && git cvsimport -p"-x" -C module-1 module && @@ -34,7 +34,7 @@ test_expect_success 'check timestamps are UTC (TZ=CST6CDT)' ' test_cmp actual-1 expect-1 ' -test_expect_success 'check timestamps with author-specific timezones' ' +test_expect_success PERL 'check timestamps with author-specific timezones' ' cat >cvs-authors <<-EOF && user1=User One <user1@domain.org> diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 665607c9cb..5b562122a1 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -145,7 +145,7 @@ test_expect_success 'exit when p4 fails to produce marshaled output' ' test_expect_code 1 git p4 clone --dest="$git" //depot >errs 2>&1 ) && cat errs && - ! test_i18ngrep Traceback errs + test_i18ngrep ! Traceback errs ' # Hide a file from p4d, make sure we catch its complaint. This won't fail in diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 4caf36e006..1f74a88385 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -403,7 +403,8 @@ test_expect_success 'submit --prepare-p4-only' ' git commit -m "prep only add" && git p4 submit --prepare-p4-only >out && test_i18ngrep "prepared for submission" out && - test_i18ngrep "must be deleted" out + test_i18ngrep "must be deleted" out && + test_i18ngrep ! "everything below this line is just the diff" out ) && ( cd "$cli" && diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh index 23a827fa77..897b3c3034 100755 --- a/t/t9809-git-p4-client-view.sh +++ b/t/t9809-git-p4-client-view.sh @@ -365,7 +365,7 @@ test_expect_success 'wildcard files submit back to p4, client-spec case' ' ( cd "$git" && echo git-wild-hash >dir1/git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then echo git-wild-star >dir1/git-wild\*star fi && @@ -379,7 +379,7 @@ test_expect_success 'wildcard files submit back to p4, client-spec case' ' ( cd "$cli" && test_path_is_file dir1/git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test_path_is_file dir1/git-wild\*star fi && diff --git a/t/t9812-git-p4-wildcards.sh b/t/t9812-git-p4-wildcards.sh index c7472cbf54..0206771fbb 100755 --- a/t/t9812-git-p4-wildcards.sh +++ b/t/t9812-git-p4-wildcards.sh @@ -14,7 +14,7 @@ test_expect_success 'add p4 files with wildcards in the names' ' printf "file2\nhas\nsome\nrandom\ntext\n" >file2 && p4 add file2 && echo file-wild-hash >file-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then echo file-wild-star >file-wild\*star fi && @@ -31,7 +31,7 @@ test_expect_success 'wildcard files git p4 clone' ' ( cd "$git" && test -f file-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test -f file-wild\*star fi && @@ -46,7 +46,7 @@ test_expect_success 'wildcard files submit back to p4, add' ' ( cd "$git" && echo git-wild-hash >git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then echo git-wild-star >git-wild\*star fi && @@ -60,7 +60,7 @@ test_expect_success 'wildcard files submit back to p4, add' ' ( cd "$cli" && test_path_is_file git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test_path_is_file git-wild\*star fi && @@ -75,7 +75,7 @@ test_expect_success 'wildcard files submit back to p4, modify' ' ( cd "$git" && echo new-line >>git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then echo new-line >>git-wild\*star fi && @@ -89,7 +89,7 @@ test_expect_success 'wildcard files submit back to p4, modify' ' ( cd "$cli" && test_line_count = 2 git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test_line_count = 2 git-wild\*star fi && @@ -152,7 +152,7 @@ test_expect_success 'wildcard files submit back to p4, delete' ' ( cd "$cli" && test_path_is_missing git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test_path_is_missing git-wild\*star fi && diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh index be802e0e16..95f4421f71 100755 --- a/t/t9814-git-p4-rename.sh +++ b/t/t9814-git-p4-rename.sh @@ -177,7 +177,10 @@ test_expect_success 'detect copies' ' level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 -o "$src" = file11 && + case "$src" in + file10 | file11) : ;; # happy + *) false ;; # not + && git config git-p4.detectCopies $(($level + 2)) && git p4 submit && p4 filelog //depot/file12 && @@ -191,7 +194,10 @@ test_expect_success 'detect copies' ' level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 -o "$src" = file11 -o "$src" = file12 && + case "$src" in + file10 | file11 | file12) : ;; # happy + *) false ;; # not + && git config git-p4.detectCopies $(($level - 2)) && git p4 submit && p4 filelog //depot/file13 && diff --git a/t/t9815-git-p4-submit-fail.sh b/t/t9815-git-p4-submit-fail.sh index 1243d96092..4cff6a760f 100755 --- a/t/t9815-git-p4-submit-fail.sh +++ b/t/t9815-git-p4-submit-fail.sh @@ -417,7 +417,7 @@ test_expect_success 'cleanup chmod after submit cancel' ' ! p4 fstat -T action text && test_path_is_file text+x && ! p4 fstat -T action text+x && - if test_have_prereq NOT_CYGWIN + if test_have_prereq !CYGWIN then stat --format=%A text | egrep ^-r-- && stat --format=%A text+x | egrep ^-r-x diff --git a/t/t9817-git-p4-exclude.sh b/t/t9817-git-p4-exclude.sh new file mode 100755 index 0000000000..aac568eadf --- /dev/null +++ b/t/t9817-git-p4-exclude.sh @@ -0,0 +1,71 @@ +#!/bin/sh + +test_description='git p4 tests for excluded paths during clone and sync' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +# Create a repo with the structure: +# +# //depot/wanted/foo +# //depot/discard/foo +# +# Check that we can exclude a subdirectory with both +# clone and sync operations. + +test_expect_success 'create exclude repo' ' + ( + cd "$cli" && + mkdir -p wanted discard && + echo wanted >wanted/foo && + echo discard >discard/foo && + p4 add wanted/foo discard/foo && + p4 submit -d "initial revision" + ) +' + +test_expect_success 'check the repo was created correctly' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot/...@all && + ( + cd "$git" && + test_path_is_file wanted/foo && + test_path_is_file discard/foo + ) +' + +test_expect_success 'clone, excluding part of repo' ' + test_when_finished cleanup_git && + git p4 clone -//depot/discard/... --dest="$git" //depot/...@all && + ( + cd "$git" && + test_path_is_file wanted/foo && + test_path_is_missing discard/foo + ) +' + +test_expect_success 'clone, then sync with exclude' ' + test_when_finished cleanup_git && + git p4 clone -//depot/discard/... --dest="$git" //depot/...@all && + ( + cd "$cli" && + p4 edit wanted/foo discard/foo && + date >>wanted/foo && + date >>discard/foo && + p4 submit -d "updating" && + + cd "$git" && + git p4 sync -//depot/discard/... && + test_path_is_file wanted/foo && + test_path_is_missing discard/foo + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 2d4beb5e50..f10a75290e 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -212,9 +212,18 @@ test_expect_success '__gitdir - non-existing $GIT_DIR' ' ) ' +function pwd_P_W () { + if test_have_prereq MINGW + then + pwd -W + else + pwd -P + fi +} + test_expect_success '__gitdir - gitfile in cwd' ' - echo "$(pwd -P)/otherrepo/.git" >expected && - echo "gitdir: $TRASH_DIRECTORY/otherrepo/.git" >subdir/.git && + echo "$(pwd_P_W)/otherrepo/.git" >expected && + echo "gitdir: $(pwd_P_W)/otherrepo/.git" >subdir/.git && test_when_finished "rm -f subdir/.git" && ( cd subdir && @@ -224,8 +233,8 @@ test_expect_success '__gitdir - gitfile in cwd' ' ' test_expect_success '__gitdir - gitfile in parent' ' - echo "$(pwd -P)/otherrepo/.git" >expected && - echo "gitdir: $TRASH_DIRECTORY/otherrepo/.git" >subdir/.git && + echo "$(pwd_P_W)/otherrepo/.git" >expected && + echo "gitdir: $(pwd_P_W)/otherrepo/.git" >subdir/.git && test_when_finished "rm -f subdir/.git" && ( cd subdir/subsubdir && @@ -550,6 +559,33 @@ test_expect_success 'complete files' ' test_completion "git add mom" "momified" ' +test_expect_success "completion uses <cmd> completion for alias: !sh -c 'git <cmd> ...'" ' + test_config alias.co "!sh -c '"'"'git checkout ...'"'"'" && + test_completion "git co m" <<-\EOF + master Z + mybranch Z + mytag Z + EOF +' + +test_expect_success 'completion uses <cmd> completion for alias: !f () { VAR=val git <cmd> ... }' ' + test_config alias.co "!f () { VAR=val git checkout ... ; } f" && + test_completion "git co m" <<-\EOF + master Z + mybranch Z + mytag Z + EOF +' + +test_expect_success 'completion used <cmd> completion for alias: !f() { : git <cmd> ; ... }' ' + test_config alias.co "!f() { : git checkout ; if ... } f" && + test_completion "git co m" <<-\EOF + master Z + mybranch Z + mytag Z + EOF +' + test_expect_failure 'complete with tilde expansion' ' git init tmp && cd tmp && test_when_finished "cd .. && rm -rf tmp" && diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 9150984184..51ecd3e4c1 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -35,6 +35,8 @@ test_expect_success 'setup for prompt tests' ' git commit -m "another b2" file && echo 000 >file && git commit -m "yet another b2" file && + mkdir ignored_dir && + echo "ignored_dir/" >>.gitignore && git checkout master ' @@ -588,4 +590,108 @@ test_expect_success 'prompt - zsh color pc mode' ' test_cmp expected "$actual" ' +test_expect_success 'prompt - hide if pwd ignored - env var unset, config disabled' ' + printf " (master)" >expected && + test_config bash.hideIfPwdIgnored false && + ( + cd ignored_dir && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var unset, config disabled, pc mode' ' + printf "BEFORE: (\${__git_ps1_branch_name}):AFTER" >expected && + test_config bash.hideIfPwdIgnored false && + ( + cd ignored_dir && + __git_ps1 "BEFORE:" ":AFTER" && + printf "%s" "$PS1" >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var unset, config unset' ' + printf " (master)" >expected && + ( + cd ignored_dir && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var unset, config unset, pc mode' ' + printf "BEFORE: (\${__git_ps1_branch_name}):AFTER" >expected && + ( + cd ignored_dir && + __git_ps1 "BEFORE:" ":AFTER" && + printf "%s" "$PS1" >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var set, config disabled' ' + printf " (master)" >expected && + test_config bash.hideIfPwdIgnored false && + ( + cd ignored_dir && + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var set, config disabled, pc mode' ' + printf "BEFORE: (\${__git_ps1_branch_name}):AFTER" >expected && + test_config bash.hideIfPwdIgnored false && + ( + cd ignored_dir && + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + __git_ps1 "BEFORE:" ":AFTER" && + printf "%s" "$PS1" >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var set, config unset' ' + printf "" >expected && + ( + cd ignored_dir && + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + __git_ps1 >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - env var set, config unset, pc mode' ' + printf "BEFORE::AFTER" >expected && + ( + cd ignored_dir && + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + __git_ps1 "BEFORE:" ":AFTER" && + printf "%s" "$PS1" >"$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stdout)' ' + printf " (GIT_DIR!)" >expected && + ( + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + cd .git && + __git_ps1 >"$actual" 2>/dev/null + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stderr)' ' + printf "" >expected && + ( + GIT_PS1_HIDE_IF_PWD_IGNORED=y && + cd .git && + __git_ps1 >/dev/null 2>"$actual" + ) && + test_cmp expected "$actual" +' + test_done diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index cf7b41f66d..0d93e33de4 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -413,7 +413,7 @@ test_external () { # test_run_, but keep its stdout on our stdout even in # non-verbose mode. "$@" 2>&4 - if [ "$?" = 0 ] + if test "$?" = 0 then if test $test_external_has_tap -eq 0; then test_ok_ "$descr" @@ -440,11 +440,12 @@ test_external_without_stderr () { tmp=${TMPDIR:-/tmp} stderr="$tmp/git-external-stderr.$$.tmp" test_external "$@" 4> "$stderr" - [ -f "$stderr" ] || error "Internal error: $stderr disappeared." + test -f "$stderr" || error "Internal error: $stderr disappeared." descr="no stderr: $1" shift say >&3 "# expecting no stderr from previous command" - if [ ! -s "$stderr" ]; then + if test ! -s "$stderr" + then rm "$stderr" if test $test_external_has_tap -eq 0; then @@ -454,8 +455,9 @@ test_external_without_stderr () { test_success=$(($test_success + 1)) fi else - if [ "$verbose" = t ]; then - output=`echo; echo "# Stderr is:"; cat "$stderr"` + if test "$verbose" = t + then + output=$(echo; echo "# Stderr is:"; cat "$stderr") else output= fi @@ -474,7 +476,7 @@ test_external_without_stderr () { # The commands test the existence or non-existence of $1. $2 can be # given to provide a more precise diagnosis. test_path_is_file () { - if ! [ -f "$1" ] + if ! test -f "$1" then echo "File $1 doesn't exist. $*" false @@ -482,19 +484,31 @@ test_path_is_file () { } test_path_is_dir () { - if ! [ -d "$1" ] + if ! test -d "$1" then echo "Directory $1 doesn't exist. $*" false fi } +# Check if the directory exists and is empty as expected, barf otherwise. +test_dir_is_empty () { + test_path_is_dir "$1" && + if test -n "$(ls -a1 "$1" | egrep -v '^\.\.?$')" + then + echo "Directory '$1' is not empty, it contains:" + ls -la "$1" + return 1 + fi +} + test_path_is_missing () { - if [ -e "$1" ] + if test -e "$1" then echo "Path exists:" ls -ld "$1" - if [ $# -ge 1 ]; then + if test $# -ge 1 + then echo "$*" fi false @@ -542,7 +556,7 @@ test_must_fail () { if test $exit_code = 0; then echo >&2 "test_must_fail: command succeeded: $*" return 1 - elif test $exit_code -gt 129 -a $exit_code -le 192; then + elif test $exit_code -gt 129 && test $exit_code -le 192; then echo >&2 "test_must_fail: died by signal: $*" return 1 elif test $exit_code = 127; then @@ -569,7 +583,7 @@ test_must_fail () { test_might_fail () { "$@" exit_code=$? - if test $exit_code -gt 129 -a $exit_code -le 192; then + if test $exit_code -gt 129 && test $exit_code -le 192; then echo >&2 "test_might_fail: died by signal: $*" return 1 elif test $exit_code = 127; then @@ -623,6 +637,15 @@ test_cmp_bin() { cmp "$@" } +# Call any command "$@" but be more verbose about its +# failure. This is handy for commands like "test" which do +# not output anything when they fail. +verbose () { + "$@" && return 0 + echo >&2 "command failed: $(git rev-parse --sq-quote "$@")" + return 1 +} + # Check if the file expected to be empty is indeed empty, and barfs # otherwise. @@ -646,9 +669,12 @@ test_cmp_rev () { # similar to GNU seq(1), but the latter might not be available # everywhere (and does not do letters). It may be used like: # -# for i in `test_seq 100`; do -# for j in `test_seq 10 20`; do -# for k in `test_seq a z`; do +# for i in $(test_seq 100) +# do +# for j in $(test_seq 10 20) +# do +# for k in $(test_seq a z) +# do # echo $i-$j-$k # done # done @@ -723,6 +749,11 @@ test_ln_s_add () { fi } +# This function writes out its parameters, one per line +test_write_lines () { + printf "%s\n" "$@" +} + perl () { command "$PERL_PATH" "$@" } diff --git a/t/test-lib.sh b/t/test-lib.sh index e0266f0357..bb1402de94 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -91,6 +91,7 @@ unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e ' VALGRIND UNZIP PERF_ + CURL_VERBOSE )); my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); print join("\n", @vars); @@ -108,6 +109,10 @@ export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME export EDITOR +# Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output +GIT_TRACE_BARE=1 +export GIT_TRACE_BARE + if test -n "${TEST_GIT_INDEX_VERSION:+isset}" then GIT_INDEX_VERSION="$TEST_GIT_INDEX_VERSION" @@ -135,6 +140,9 @@ else } fi +: ${ASAN_OPTIONS=detect_leaks=0} +export ASAN_OPTIONS + # Protect ourselves from common misconfiguration to export # CDPATH into the environment unset CDPATH @@ -176,16 +184,8 @@ export _x05 _x40 _z40 LF u200c # This test checks if command xyzzy does the right thing... # ' # . ./test-lib.sh -[ "x$ORIGINAL_TERM" != "xdumb" ] && ( - TERM=$ORIGINAL_TERM && - export TERM && - [ -t 1 ] && - tput bold >/dev/null 2>&1 && - tput setaf 1 >/dev/null 2>&1 && - tput sgr0 >/dev/null 2>&1 - ) && - color=t +unset color while test "$#" -ne 0 do case "$1" in @@ -195,6 +195,14 @@ do immediate=t; shift ;; -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;; + -r) + shift; test "$#" -ne 0 || { + echo 'error: -r requires an argument' >&2; + exit 1; + } + run_list=$1; shift ;; + --run=*) + run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;; -h|--h|--he|--hel|--help) help=t; shift ;; -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) @@ -224,6 +232,10 @@ do --root=*) root=$(expr "z$1" : 'z[^=]*=\(.*\)') shift ;; + -x) + trace=t + verbose=t + shift ;; *) echo "error: unknown test option '$1'" >&2; exit 1 ;; esac @@ -238,40 +250,6 @@ then verbose=t fi -if test -n "$color" -then - say_color () { - ( - TERM=$ORIGINAL_TERM - export TERM - case "$1" in - error) - tput bold; tput setaf 1;; # bold red - skip) - tput setaf 4;; # blue - warn) - tput setaf 3;; # brown/yellow - pass) - tput setaf 2;; # green - info) - tput setaf 6;; # cyan - *) - test -n "$quiet" && return;; - esac - shift - printf "%s" "$*" - tput sgr0 - echo - ) - } -else - say_color() { - test -z "$1" && test -n "$quiet" && return - shift - printf "%s\n" "$*" - } -fi - error () { say_color error "error: $*" GIT_EXIT_OK=t @@ -370,6 +348,99 @@ match_pattern_list () { return 1 } +match_test_selector_list () { + title="$1" + shift + arg="$1" + shift + test -z "$1" && return 0 + + # Both commas and whitespace are accepted as separators. + OLDIFS=$IFS + IFS=' ,' + set -- $1 + IFS=$OLDIFS + + # If the first selector is negative we include by default. + include= + case "$1" in + !*) include=t ;; + esac + + for selector + do + orig_selector=$selector + + positive=t + case "$selector" in + !*) + positive= + selector=${selector##?} + ;; + esac + + test -z "$selector" && continue + + case "$selector" in + *-*) + if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in range" \ + "start: '$orig_selector'" >&2 + exit 1 + fi + if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in range" \ + "end: '$orig_selector'" >&2 + exit 1 + fi + ;; + *) + if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in test" \ + "selector: '$orig_selector'" >&2 + exit 1 + fi + esac + + # Short cut for "obvious" cases + test -z "$include" && test -z "$positive" && continue + test -n "$include" && test -n "$positive" && continue + + case "$selector" in + -*) + if test $arg -le ${selector#-} + then + include=$positive + fi + ;; + *-) + if test $arg -ge ${selector%-} + then + include=$positive + fi + ;; + *-*) + if test ${selector%%-*} -le $arg \ + && test $arg -le ${selector#*-} + then + include=$positive + fi + ;; + *) + if test $arg -eq $selector + then + include=$positive + fi + ;; + esac + done + + test -n "$include" +} + maybe_teardown_verbose () { test -z "$verbose_only" && return exec 4>/dev/null 3>/dev/null @@ -415,10 +486,39 @@ maybe_setup_valgrind () { fi } +# This is a separate function because some tests use +# "return" to end a test_expect_success block early +# (and we want to make sure we run any cleanup like +# "set +x"). +test_eval_inner_ () { + # Do not add anything extra (including LF) after '$*' + eval " + test \"$trace\" = t && set -x + $*" +} + test_eval_ () { - # This is a separate function because some tests use - # "return" to end a test_expect_success block early. - eval </dev/null >&3 2>&4 "$*" + # We run this block with stderr redirected to avoid extra cruft + # during a "-x" trace. Once in "set -x" mode, we cannot prevent + # the shell from printing the "set +x" to turn it off (nor the saving + # of $? before that). But we can make sure that the output goes to + # /dev/null. + # + # The test itself is run with stderr put back to &4 (so either to + # /dev/null, or to the original stderr if --verbose was used). + { + test_eval_inner_ "$@" </dev/null >&3 2>&4 + test_eval_ret_=$? + if test "$trace" = t + then + set +x + if test "$test_eval_ret_" != 0 + then + say_color error >&4 "error: last command exited with \$?=$test_eval_ret_" + fi + fi + } 2>/dev/null + return $test_eval_ret_ } test_run_ () { @@ -429,7 +529,8 @@ test_run_ () { eval_ret=$? teardown_malloc_check - if test -z "$immediate" || test $eval_ret = 0 || test -n "$expecting_failure" + if test -z "$immediate" || test $eval_ret = 0 || + test -n "$expecting_failure" && test "$test_cleanup" != ":" then setup_malloc_check test_eval_ "$test_cleanup" @@ -456,25 +557,35 @@ test_finish_ () { test_skip () { to_skip= + skipped_reason= if match_pattern_list $this_test.$test_count $GIT_SKIP_TESTS then to_skip=t + skipped_reason="GIT_SKIP_TESTS" fi if test -z "$to_skip" && test -n "$test_prereq" && ! test_have_prereq "$test_prereq" then to_skip=t - fi - case "$to_skip" in - t) + of_prereq= if test "$missing_prereq" != "$test_prereq" then of_prereq=" of $test_prereq" fi + skipped_reason="missing $missing_prereq${of_prereq}" + fi + if test -z "$to_skip" && test -n "$run_list" && + ! match_test_selector_list '--run' $test_count "$run_list" + then + to_skip=t + skipped_reason="--run" + fi + case "$to_skip" in + t) say_color skip >&3 "skipping test: $@" - say_color skip "ok $test_count # skip $1 (missing $missing_prereq${of_prereq})" + say_color skip "ok $test_count # skip $1 ($skipped_reason)" : true ;; *) @@ -531,7 +642,7 @@ test_done () { then error "Can't use skip_all after running some tests" fi - [ -z "$skip_all" ] || skip_all=" # SKIP $skip_all" + test -z "$skip_all" || skip_all=" # SKIP $skip_all" if test $test_external_has_tap -eq 0 then @@ -701,7 +812,54 @@ rm -fr "$TRASH_DIRECTORY" || { } HOME="$TRASH_DIRECTORY" -export HOME +GNUPGHOME="$HOME/gnupg-home-not-used" +export HOME GNUPGHOME + +# run the tput tests *after* changing HOME (in case ncurses needs +# ~/.terminfo for $TERM) +test -n "${color+set}" || test "x$ORIGINAL_TERM" != "xdumb" && ( + TERM=$ORIGINAL_TERM && + export TERM && + test -t 1 && + tput bold >/dev/null 2>&1 && + tput setaf 1 >/dev/null 2>&1 && + tput sgr0 >/dev/null 2>&1 + ) && + color=t + +if test -n "$color" +then + say_color () { + ( + TERM=$ORIGINAL_TERM + export TERM + case "$1" in + error) + tput bold; tput setaf 1;; # bold red + skip) + tput setaf 4;; # blue + warn) + tput setaf 3;; # brown/yellow + pass) + tput setaf 2;; # green + info) + tput setaf 6;; # cyan + *) + test -n "$quiet" && return;; + esac + shift + printf "%s" "$*" + tput sgr0 + echo + ) + } +else + say_color() { + test -z "$1" && test -n "$quiet" && return + shift + printf "%s\n" "$*" + } +fi if test -z "$TEST_NO_CREATE_REPO" then @@ -758,7 +916,7 @@ case $(uname -s) in # backslashes in pathspec are converted to '/' # exec does not inherit the PID test_set_prereq MINGW - test_set_prereq NOT_CYGWIN + test_set_prereq NATIVE_CRLF test_set_prereq SED_STRIPS_CR test_set_prereq GREP_STRIPS_CR GIT_TEST_CMP=mingw_test_cmp @@ -766,7 +924,6 @@ case $(uname -s) in *CYGWIN*) test_set_prereq POSIXPERM test_set_prereq EXECKEEPSPID - test_set_prereq NOT_MINGW test_set_prereq CYGWIN test_set_prereq SED_STRIPS_CR test_set_prereq GREP_STRIPS_CR @@ -775,8 +932,6 @@ case $(uname -s) in test_set_prereq POSIXPERM test_set_prereq BSLASHPSPEC test_set_prereq EXECKEEPSPID - test_set_prereq NOT_MINGW - test_set_prereq NOT_CYGWIN ;; esac @@ -868,6 +1023,14 @@ test_lazy_prereq AUTOIDENT ' git var GIT_AUTHOR_IDENT ' +test_lazy_prereq EXPENSIVE ' + test -n "$GIT_TEST_LONG" +' + +test_lazy_prereq USR_BIN_TIME ' + test -x /usr/bin/time +' + # When the tests are run as root, permission tests will report that # things are writable when they shouldn't be. test -w / || test_set_prereq SANITY |