summaryrefslogtreecommitdiff
path: root/t
diff options
context:
space:
mode:
Diffstat (limited to 't')
-rw-r--r--t/Makefile43
-rw-r--r--t/perf/.gitignore2
-rw-r--r--t/perf/Makefile15
-rw-r--r--t/perf/README146
-rwxr-xr-xt/perf/aggregate.perl166
-rwxr-xr-xt/perf/min_time.perl21
-rwxr-xr-xt/perf/p0000-perf-lib-sanity.sh41
-rwxr-xr-xt/perf/p0001-rev-list.sh17
-rwxr-xr-xt/perf/p7810-grep.sh23
-rw-r--r--t/perf/perf-lib.sh198
-rwxr-xr-xt/perf/run82
-rw-r--r--t/test-lib-functions.sh565
-rw-r--r--t/test-lib.sh574
13 files changed, 1342 insertions, 551 deletions
diff --git a/t/Makefile b/t/Makefile
index b5048ab77b..6091211f10 100644
--- a/t/Makefile
+++ b/t/Makefile
@@ -73,4 +73,45 @@ gitweb-test:
valgrind:
$(MAKE) GIT_TEST_OPTS="$(GIT_TEST_OPTS) --valgrind"
-.PHONY: pre-clean $(T) aggregate-results clean valgrind
+perf:
+ $(MAKE) -C perf/ all
+
+# Smoke testing targets
+-include ../GIT-VERSION-FILE
+uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo unknown')
+uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo unknown')
+
+test-results:
+ mkdir -p test-results
+
+test-results/git-smoke.tar.gz: test-results
+ $(PERL_PATH) ./harness \
+ --archive="test-results/git-smoke.tar.gz" \
+ $(T)
+
+smoke: test-results/git-smoke.tar.gz
+
+SMOKE_UPLOAD_FLAGS =
+ifdef SMOKE_USERNAME
+ SMOKE_UPLOAD_FLAGS += -F username="$(SMOKE_USERNAME)" -F password="$(SMOKE_PASSWORD)"
+endif
+ifdef SMOKE_COMMENT
+ SMOKE_UPLOAD_FLAGS += -F comments="$(SMOKE_COMMENT)"
+endif
+ifdef SMOKE_TAGS
+ SMOKE_UPLOAD_FLAGS += -F tags="$(SMOKE_TAGS)"
+endif
+
+smoke_report: smoke
+ curl \
+ -H "Expect: " \
+ -F project=Git \
+ -F architecture="$(uname_M)" \
+ -F platform="$(uname_S)" \
+ -F revision="$(GIT_VERSION)" \
+ -F report_file=@test-results/git-smoke.tar.gz \
+ $(SMOKE_UPLOAD_FLAGS) \
+ http://smoke.git.nix.is/app/projects/process_add_report/1 \
+ | grep -v ^Redirecting
+
+.PHONY: pre-clean $(T) aggregate-results clean valgrind perf
diff --git a/t/perf/.gitignore b/t/perf/.gitignore
new file mode 100644
index 0000000000..50f5cc1ed9
--- /dev/null
+++ b/t/perf/.gitignore
@@ -0,0 +1,2 @@
+build/
+test-results/
diff --git a/t/perf/Makefile b/t/perf/Makefile
new file mode 100644
index 0000000000..8c47155a7c
--- /dev/null
+++ b/t/perf/Makefile
@@ -0,0 +1,15 @@
+-include ../../config.mak
+export GIT_TEST_OPTIONS
+
+all: perf
+
+perf: pre-clean
+ ./run
+
+pre-clean:
+ rm -rf test-results
+
+clean:
+ rm -rf build "trash directory".* test-results
+
+.PHONY: all perf pre-clean clean
diff --git a/t/perf/README b/t/perf/README
new file mode 100644
index 0000000000..b2dbad4d50
--- /dev/null
+++ b/t/perf/README
@@ -0,0 +1,146 @@
+Git performance tests
+=====================
+
+This directory holds performance testing scripts for git tools. The
+first part of this document describes the various ways in which you
+can run them.
+
+When fixing the tools or adding enhancements, you are strongly
+encouraged to add tests in this directory to cover what you are
+trying to fix or enhance. The later part of this short document
+describes how your test scripts should be organized.
+
+
+Running Tests
+-------------
+
+The easiest way to run tests is to say "make". This runs all
+the tests on the current git repository.
+
+ === Running 2 tests in this tree ===
+ [...]
+ Test this tree
+ ---------------------------------------------------------
+ 0001.1: rev-list --all 0.54(0.51+0.02)
+ 0001.2: rev-list --all --objects 6.14(5.99+0.11)
+ 7810.1: grep worktree, cheap regex 0.16(0.16+0.35)
+ 7810.2: grep worktree, expensive regex 7.90(29.75+0.37)
+ 7810.3: grep --cached, cheap regex 3.07(3.02+0.25)
+ 7810.4: grep --cached, expensive regex 9.39(30.57+0.24)
+
+You can compare multiple repositories and even git revisions with the
+'run' script:
+
+ $ ./run . origin/next /path/to/git-tree p0001-rev-list.sh
+
+where . stands for the current git tree. The full invocation is
+
+ ./run [<revision|directory>...] [--] [<test-script>...]
+
+A '.' argument is implied if you do not pass any other
+revisions/directories.
+
+You can also manually test this or another git build tree, and then
+call the aggregation script to summarize the results:
+
+ $ ./p0001-rev-list.sh
+ [...]
+ $ GIT_BUILD_DIR=/path/to/other/git ./p0001-rev-list.sh
+ [...]
+ $ ./aggregate.perl . /path/to/other/git ./p0001-rev-list.sh
+
+aggregate.perl has the same invocation as 'run', it just does not run
+anything beforehand.
+
+You can set the following variables (also in your config.mak):
+
+ GIT_PERF_REPEAT_COUNT
+ Number of times a test should be repeated for best-of-N
+ measurements. Defaults to 5.
+
+ GIT_PERF_MAKE_OPTS
+ Options to use when automatically building a git tree for
+ performance testing. E.g., -j6 would be useful.
+
+ GIT_PERF_REPO
+ GIT_PERF_LARGE_REPO
+ Repositories to copy for the performance tests. The normal
+ repo should be at least git.git size. The large repo should
+ probably be about linux-2.6.git size for optimal results.
+ Both default to the git.git you are running from.
+
+You can also pass the options taken by ordinary git tests; the most
+useful one is:
+
+--root=<directory>::
+ Create "trash" directories used to store all temporary data during
+ testing under <directory>, instead of the t/ directory.
+ Using this option with a RAM-based filesystem (such as tmpfs)
+ can massively speed up the test suite.
+
+
+Naming Tests
+------------
+
+The performance test files are named as:
+
+ pNNNN-commandname-details.sh
+
+where N is a decimal digit. The same conventions for choosing NNNN as
+for normal tests apply.
+
+
+Writing Tests
+-------------
+
+The perf script starts much like a normal test script, except it
+sources perf-lib.sh:
+
+ #!/bin/sh
+ #
+ # Copyright (c) 2005 Junio C Hamano
+ #
+
+ test_description='xxx performance test'
+ . ./perf-lib.sh
+
+After that you will want to use some of the following:
+
+ test_perf_default_repo # sets up a "normal" repository
+ test_perf_large_repo # sets up a "large" repository
+
+ test_perf_default_repo sub # ditto, in a subdir "sub"
+
+ test_checkout_worktree # if you need the worktree too
+
+At least one of the first two is required!
+
+You can use test_expect_success as usual. For actual performance
+tests, use
+
+ test_perf 'descriptive string' '
+ command1 &&
+ command2
+ '
+
+test_perf spawns a subshell, for lack of better options. This means
+that
+
+* you _must_ export all variables that you need in the subshell
+
+* you _must_ flag all variables that you want to persist from the
+ subshell with 'test_export':
+
+ test_perf 'descriptive string' '
+ foo=$(git rev-parse HEAD) &&
+ test_export foo
+ '
+
+ The so-exported variables are automatically marked for export in the
+ shell executing the perf test. For your convenience, test_export is
+ the same as export in the main shell.
+
+ This feature relies on a bit of magic using 'set' and 'source'.
+ While we have tried to make sure that it can cope with embedded
+ whitespace and other special characters, it will not work with
+ multi-line data.
diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl
new file mode 100755
index 0000000000..15f7fc1b80
--- /dev/null
+++ b/t/perf/aggregate.perl
@@ -0,0 +1,166 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+use Git;
+
+sub get_times {
+ my $name = shift;
+ open my $fh, "<", $name or return undef;
+ my $line = <$fh>;
+ return undef if not defined $line;
+ close $fh or die "cannot close $name: $!";
+ $line =~ /^(?:(\d+):)?(\d+):(\d+(?:\.\d+)?) (\d+(?:\.\d+)?) (\d+(?:\.\d+)?)$/
+ or die "bad input line: $line";
+ my $rt = ((defined $1 ? $1 : 0.0)*60+$2)*60+$3;
+ return ($rt, $4, $5);
+}
+
+sub format_times {
+ my ($r, $u, $s, $firstr) = @_;
+ if (!defined $r) {
+ return "<missing>";
+ }
+ my $out = sprintf "%.2f(%.2f+%.2f)", $r, $u, $s;
+ if (defined $firstr) {
+ if ($firstr > 0) {
+ $out .= sprintf " %+.1f%%", 100.0*($r-$firstr)/$firstr;
+ } elsif ($r == 0) {
+ $out .= " =";
+ } else {
+ $out .= " +inf";
+ }
+ }
+ return $out;
+}
+
+my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests);
+while (scalar @ARGV) {
+ my $arg = $ARGV[0];
+ my $dir;
+ last if -f $arg or $arg eq "--";
+ if (! -d $arg) {
+ my $rev = Git::command_oneline(qw(rev-parse --verify), $arg);
+ $dir = "build/".$rev;
+ } else {
+ $arg =~ s{/*$}{};
+ $dir = $arg;
+ $dirabbrevs{$dir} = $dir;
+ }
+ push @dirs, $dir;
+ $dirnames{$dir} = $arg;
+ my $prefix = $dir;
+ $prefix =~ tr/^a-zA-Z0-9/_/c;
+ $prefixes{$dir} = $prefix . '.';
+ shift @ARGV;
+}
+
+if (not @dirs) {
+ @dirs = ('.');
+}
+$dirnames{'.'} = $dirabbrevs{'.'} = "this tree";
+$prefixes{'.'} = '';
+
+shift @ARGV if scalar @ARGV and $ARGV[0] eq "--";
+
+@tests = @ARGV;
+if (not @tests) {
+ @tests = glob "p????-*.sh";
+}
+
+my @subtests;
+my %shorttests;
+for my $t (@tests) {
+ $t =~ s{(?:.*/)?(p(\d+)-[^/]+)\.sh$}{$1} or die "bad test name: $t";
+ my $n = $2;
+ my $fname = "test-results/$t.subtests";
+ open my $fp, "<", $fname or die "cannot open $fname: $!";
+ for (<$fp>) {
+ chomp;
+ /^(\d+)$/ or die "malformed subtest line: $_";
+ push @subtests, "$t.$1";
+ $shorttests{"$t.$1"} = "$n.$1";
+ }
+ close $fp or die "cannot close $fname: $!";
+}
+
+sub read_descr {
+ my $name = shift;
+ open my $fh, "<", $name or return "<error reading description>";
+ my $line = <$fh>;
+ close $fh or die "cannot close $name";
+ chomp $line;
+ return $line;
+}
+
+my %descrs;
+my $descrlen = 4; # "Test"
+for my $t (@subtests) {
+ $descrs{$t} = $shorttests{$t}.": ".read_descr("test-results/$t.descr");
+ $descrlen = length $descrs{$t} if length $descrs{$t}>$descrlen;
+}
+
+sub have_duplicate {
+ my %seen;
+ for (@_) {
+ return 1 if exists $seen{$_};
+ $seen{$_} = 1;
+ }
+ return 0;
+}
+sub have_slash {
+ for (@_) {
+ return 1 if m{/};
+ }
+ return 0;
+}
+
+my %newdirabbrevs = %dirabbrevs;
+while (!have_duplicate(values %newdirabbrevs)) {
+ %dirabbrevs = %newdirabbrevs;
+ last if !have_slash(values %dirabbrevs);
+ %newdirabbrevs = %dirabbrevs;
+ for (values %newdirabbrevs) {
+ s{^[^/]*/}{};
+ }
+}
+
+my %times;
+my @colwidth = ((0)x@dirs);
+for my $i (0..$#dirs) {
+ my $d = $dirs[$i];
+ my $w = length (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d});
+ $colwidth[$i] = $w if $w > $colwidth[$i];
+}
+for my $t (@subtests) {
+ my $firstr;
+ for my $i (0..$#dirs) {
+ my $d = $dirs[$i];
+ $times{$prefixes{$d}.$t} = [get_times("test-results/$prefixes{$d}$t.times")];
+ my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}};
+ my $w = length format_times($r,$u,$s,$firstr);
+ $colwidth[$i] = $w if $w > $colwidth[$i];
+ $firstr = $r unless defined $firstr;
+ }
+}
+my $totalwidth = 3*@dirs+$descrlen;
+$totalwidth += $_ for (@colwidth);
+
+printf "%-${descrlen}s", "Test";
+for my $i (0..$#dirs) {
+ my $d = $dirs[$i];
+ printf " %-$colwidth[$i]s", (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d});
+}
+print "\n";
+print "-"x$totalwidth, "\n";
+for my $t (@subtests) {
+ printf "%-${descrlen}s", $descrs{$t};
+ my $firstr;
+ for my $i (0..$#dirs) {
+ my $d = $dirs[$i];
+ my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}};
+ printf " %-$colwidth[$i]s", format_times($r,$u,$s,$firstr);
+ $firstr = $r unless defined $firstr;
+ }
+ print "\n";
+}
diff --git a/t/perf/min_time.perl b/t/perf/min_time.perl
new file mode 100755
index 0000000000..c1a2717e07
--- /dev/null
+++ b/t/perf/min_time.perl
@@ -0,0 +1,21 @@
+#!/usr/bin/perl
+
+my $minrt = 1e100;
+my $min;
+
+while (<>) {
+ # [h:]m:s.xx U.xx S.xx
+ /^(?:(\d+):)?(\d+):(\d+(?:\.\d+)?) (\d+(?:\.\d+)?) (\d+(?:\.\d+)?)$/
+ or die "bad input line: $_";
+ my $rt = ((defined $1 ? $1 : 0.0)*60+$2)*60+$3;
+ if ($rt < $minrt) {
+ $min = $_;
+ $minrt = $rt;
+ }
+}
+
+if (!defined $min) {
+ die "no input found";
+}
+
+print $min;
diff --git a/t/perf/p0000-perf-lib-sanity.sh b/t/perf/p0000-perf-lib-sanity.sh
new file mode 100755
index 0000000000..2ca4aaccb8
--- /dev/null
+++ b/t/perf/p0000-perf-lib-sanity.sh
@@ -0,0 +1,41 @@
+#!/bin/sh
+
+test_description='Tests whether perf-lib facilities work'
+. ./perf-lib.sh
+
+test_perf_default_repo
+
+test_perf 'test_perf_default_repo works' '
+ foo=$(git rev-parse HEAD) &&
+ test_export foo
+'
+
+test_checkout_worktree
+
+test_perf 'test_checkout_worktree works' '
+ wt=$(find . | wc -l) &&
+ idx=$(git ls-files | wc -l) &&
+ test $wt -gt $idx
+'
+
+baz=baz
+test_export baz
+
+test_expect_success 'test_export works' '
+ echo "$foo" &&
+ test "$foo" = "$(git rev-parse HEAD)" &&
+ echo "$baz" &&
+ test "$baz" = baz
+'
+
+test_perf 'export a weird var' '
+ bar="weird # variable" &&
+ test_export bar
+'
+
+test_expect_success 'test_export works with weird vars' '
+ echo "$bar" &&
+ test "$bar" = "weird # variable"
+'
+
+test_done
diff --git a/t/perf/p0001-rev-list.sh b/t/perf/p0001-rev-list.sh
new file mode 100755
index 0000000000..4f71a63b0a
--- /dev/null
+++ b/t/perf/p0001-rev-list.sh
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+test_description="Tests history walking performance"
+
+. ./perf-lib.sh
+
+test_perf_default_repo
+
+test_perf 'rev-list --all' '
+ git rev-list --all >/dev/null
+'
+
+test_perf 'rev-list --all --objects' '
+ git rev-list --all --objects >/dev/null
+'
+
+test_done
diff --git a/t/perf/p7810-grep.sh b/t/perf/p7810-grep.sh
new file mode 100755
index 0000000000..9f4ade639f
--- /dev/null
+++ b/t/perf/p7810-grep.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+test_description="git-grep performance in various modes"
+
+. ./perf-lib.sh
+
+test_perf_large_repo
+test_checkout_worktree
+
+test_perf 'grep worktree, cheap regex' '
+ git grep some_nonexistent_string || :
+'
+test_perf 'grep worktree, expensive regex' '
+ git grep "^.* *some_nonexistent_string$" || :
+'
+test_perf 'grep --cached, cheap regex' '
+ git grep --cached some_nonexistent_string || :
+'
+test_perf 'grep --cached, expensive regex' '
+ git grep --cached "^.* *some_nonexistent_string$" || :
+'
+
+test_done
diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh
new file mode 100644
index 0000000000..2a5e1f354d
--- /dev/null
+++ b/t/perf/perf-lib.sh
@@ -0,0 +1,198 @@
+#!/bin/sh
+#
+# Copyright (c) 2011 Thomas Rast
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see http://www.gnu.org/licenses/ .
+
+# do the --tee work early; it otherwise confuses our careful
+# GIT_BUILD_DIR mangling
+case "$GIT_TEST_TEE_STARTED, $* " in
+done,*)
+ # do not redirect again
+ ;;
+*' --tee '*|*' --va'*)
+ mkdir -p test-results
+ BASE=test-results/$(basename "$0" .sh)
+ (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
+ echo $? > $BASE.exit) | tee $BASE.out
+ test "$(cat $BASE.exit)" = 0
+ exit
+ ;;
+esac
+
+TEST_DIRECTORY=$(pwd)/..
+TEST_OUTPUT_DIRECTORY=$(pwd)
+if test -z "$GIT_TEST_INSTALLED"; then
+ perf_results_prefix=
+else
+ perf_results_prefix=$(printf "%s" "${GIT_TEST_INSTALLED%/bin-wrappers}" | tr -c "[a-zA-Z0-9]" "[_*]")"."
+ # make the tested dir absolute
+ GIT_TEST_INSTALLED=$(cd "$GIT_TEST_INSTALLED" && pwd)
+fi
+
+TEST_NO_CREATE_REPO=t
+
+. ../test-lib.sh
+
+perf_results_dir=$TEST_OUTPUT_DIRECTORY/test-results
+mkdir -p "$perf_results_dir"
+rm -f "$perf_results_dir"/$(basename "$0" .sh).subtests
+
+if test -z "$GIT_PERF_REPEAT_COUNT"; then
+ GIT_PERF_REPEAT_COUNT=3
+fi
+die_if_build_dir_not_repo () {
+ if ! ( cd "$TEST_DIRECTORY/.." &&
+ git rev-parse --build-dir >/dev/null 2>&1 ); then
+ error "No $1 defined, and your build directory is not a repo"
+ fi
+}
+
+if test -z "$GIT_PERF_REPO"; then
+ die_if_build_dir_not_repo '$GIT_PERF_REPO'
+ GIT_PERF_REPO=$TEST_DIRECTORY/..
+fi
+if test -z "$GIT_PERF_LARGE_REPO"; then
+ die_if_build_dir_not_repo '$GIT_PERF_LARGE_REPO'
+ GIT_PERF_LARGE_REPO=$TEST_DIRECTORY/..
+fi
+
+test_perf_create_repo_from () {
+ test "$#" = 2 ||
+ error "bug in the test script: not 2 parameters to test-create-repo"
+ repo="$1"
+ source="$2"
+ source_git=$source/$(cd "$source" && git rev-parse --git-dir)
+ mkdir -p "$repo/.git"
+ (
+ cd "$repo/.git" &&
+ { cp -Rl "$source_git/objects" . 2>/dev/null ||
+ cp -R "$source_git/objects" .; } &&
+ for stuff in "$source_git"/*; do
+ case "$stuff" in
+ */objects|*/hooks|*/config)
+ ;;
+ *)
+ cp -R "$stuff" . || break
+ ;;
+ esac
+ done &&
+ cd .. &&
+ git init -q &&
+ mv .git/hooks .git/hooks-disabled 2>/dev/null
+ ) || error "failed to copy repository '$source' to '$repo'"
+}
+
+# call at least one of these to establish an appropriately-sized repository
+test_perf_default_repo () {
+ test_perf_create_repo_from "${1:-$TRASH_DIRECTORY}" "$GIT_PERF_REPO"
+}
+test_perf_large_repo () {
+ if test "$GIT_PERF_LARGE_REPO" = "$GIT_BUILD_DIR"; then
+ echo "warning: \$GIT_PERF_LARGE_REPO is \$GIT_BUILD_DIR." >&2
+ echo "warning: This will work, but may not be a sufficiently large repo" >&2
+ echo "warning: for representative measurements." >&2
+ fi
+ test_perf_create_repo_from "${1:-$TRASH_DIRECTORY}" "$GIT_PERF_LARGE_REPO"
+}
+test_checkout_worktree () {
+ git checkout-index -u -a ||
+ error "git checkout-index failed"
+}
+
+# Performance tests should never fail. If they do, stop immediately
+immediate=t
+
+test_run_perf_ () {
+ test_cleanup=:
+ test_export_="test_cleanup"
+ export test_cleanup test_export_
+ /usr/bin/time -f "%E %U %S" -o test_time.$i "$SHELL" -c '
+. '"$TEST_DIRECTORY"/../test-lib-functions.sh'
+test_export () {
+ [ $# != 0 ] || return 0
+ test_export_="$test_export_\\|$1"
+ shift
+ test_export "$@"
+}
+'"$1"'
+ret=$?
+set | sed -n "s'"/'/'\\\\''/g"';s/^\\($test_export_\\)/export '"'&'"'/p" >test_vars
+exit $ret' >&3 2>&4
+ eval_ret=$?
+
+ if test $eval_ret = 0 || test -n "$expecting_failure"
+ then
+ test_eval_ "$test_cleanup"
+ . ./test_vars || error "failed to load updated environment"
+ fi
+ if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"; then
+ echo ""
+ fi
+ return "$eval_ret"
+}
+
+
+test_perf () {
+ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
+ test "$#" = 2 ||
+ error "bug in the test script: not 2 or 3 parameters to test-expect-success"
+ export test_prereq
+ if ! test_skip "$@"
+ then
+ base=$(basename "$0" .sh)
+ echo "$test_count" >>"$perf_results_dir"/$base.subtests
+ echo "$1" >"$perf_results_dir"/$base.$test_count.descr
+ if test -z "$verbose"; then
+ echo -n "perf $test_count - $1:"
+ else
+ echo "perf $test_count - $1:"
+ fi
+ for i in $(seq 1 $GIT_PERF_REPEAT_COUNT); do
+ say >&3 "running: $2"
+ if test_run_perf_ "$2"
+ then
+ if test -z "$verbose"; then
+ echo -n " $i"
+ else
+ echo "* timing run $i/$GIT_PERF_REPEAT_COUNT:"
+ fi
+ else
+ test -z "$verbose" && echo
+ test_failure_ "$@"
+ break
+ fi
+ done
+ if test -z "$verbose"; then
+ echo " ok"
+ else
+ test_ok_ "$1"
+ fi
+ base="$perf_results_dir"/"$perf_results_prefix$(basename "$0" .sh)"."$test_count"
+ "$TEST_DIRECTORY"/perf/min_time.perl test_time.* >"$base".times
+ fi
+ echo >&3 ""
+}
+
+# We extend test_done to print timings at the end (./run disables this
+# and does it after running everything)
+test_at_end_hook_ () {
+ if test -z "$GIT_PERF_AGGREGATING_LATER"; then
+ ( cd "$TEST_DIRECTORY"/perf && ./aggregate.perl $(basename "$0") )
+ fi
+}
+
+test_export () {
+ export "$@"
+}
diff --git a/t/perf/run b/t/perf/run
new file mode 100755
index 0000000000..cfd70129bb
--- /dev/null
+++ b/t/perf/run
@@ -0,0 +1,82 @@
+#!/bin/sh
+
+case "$1" in
+ --help)
+ echo "usage: $0 [other_git_tree...] [--] [test_scripts]"
+ exit 0
+ ;;
+esac
+
+die () {
+ echo >&2 "error: $*"
+ exit 1
+}
+
+run_one_dir () {
+ if test $# -eq 0; then
+ set -- p????-*.sh
+ fi
+ echo "=== Running $# tests in ${GIT_TEST_INSTALLED:-this tree} ==="
+ for t in "$@"; do
+ ./$t $GIT_TEST_OPTS
+ done
+}
+
+unpack_git_rev () {
+ rev=$1
+ mkdir -p build/$rev
+ (cd "$(git rev-parse --show-cdup)" && git archive --format=tar $rev) |
+ (cd build/$rev && tar x)
+}
+build_git_rev () {
+ rev=$1
+ cp ../../config.mak build/$rev/config.mak
+ (cd build/$rev && make $GIT_PERF_MAKE_OPTS) ||
+ die "failed to build revision '$mydir'"
+}
+
+run_dirs_helper () {
+ mydir=${1%/}
+ shift
+ while test $# -gt 0 -a "$1" != -- -a ! -f "$1"; do
+ shift
+ done
+ if test $# -gt 0 -a "$1" = --; then
+ shift
+ fi
+ if [ ! -d "$mydir" ]; then
+ rev=$(git rev-parse --verify "$mydir" 2>/dev/null) ||
+ die "'$mydir' is neither a directory nor a valid revision"
+ if [ ! -d build/$rev ]; then
+ unpack_git_rev $rev
+ fi
+ build_git_rev $rev
+ mydir=build/$rev
+ fi
+ if test "$mydir" = .; then
+ unset GIT_TEST_INSTALLED
+ else
+ GIT_TEST_INSTALLED="$mydir/bin-wrappers"
+ export GIT_TEST_INSTALLED
+ fi
+ run_one_dir "$@"
+}
+
+run_dirs () {
+ while test $# -gt 0 -a "$1" != -- -a ! -f "$1"; do
+ run_dirs_helper "$@"
+ shift
+ done
+}
+
+GIT_PERF_AGGREGATING_LATER=t
+export GIT_PERF_AGGREGATING_LATER
+
+cd "$(dirname $0)"
+. ../../GIT-BUILD-OPTIONS
+
+if test $# = 0 -o "$1" = -- -o -f "$1"; then
+ set -- . "$@"
+fi
+run_dirs "$@"
+./aggregate.perl "$@"
diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh
new file mode 100644
index 0000000000..7b3b4bef30
--- /dev/null
+++ b/t/test-lib-functions.sh
@@ -0,0 +1,565 @@
+#!/bin/sh
+#
+# Copyright (c) 2005 Junio C Hamano
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see http://www.gnu.org/licenses/ .
+
+# The semantics of the editor variables are that of invoking
+# sh -c "$EDITOR \"$@\"" files ...
+#
+# If our trash directory contains shell metacharacters, they will be
+# interpreted if we just set $EDITOR directly, so do a little dance with
+# environment variables to work around this.
+#
+# In particular, quoting isn't enough, as the path may contain the same quote
+# that we're using.
+test_set_editor () {
+ FAKE_EDITOR="$1"
+ export FAKE_EDITOR
+ EDITOR='"$FAKE_EDITOR"'
+ export EDITOR
+}
+
+test_decode_color () {
+ awk '
+ function name(n) {
+ if (n == 0) return "RESET";
+ if (n == 1) return "BOLD";
+ if (n == 30) return "BLACK";
+ if (n == 31) return "RED";
+ if (n == 32) return "GREEN";
+ if (n == 33) return "YELLOW";
+ if (n == 34) return "BLUE";
+ if (n == 35) return "MAGENTA";
+ if (n == 36) return "CYAN";
+ if (n == 37) return "WHITE";
+ if (n == 40) return "BLACK";
+ if (n == 41) return "BRED";
+ if (n == 42) return "BGREEN";
+ if (n == 43) return "BYELLOW";
+ if (n == 44) return "BBLUE";
+ if (n == 45) return "BMAGENTA";
+ if (n == 46) return "BCYAN";
+ if (n == 47) return "BWHITE";
+ }
+ {
+ while (match($0, /\033\[[0-9;]*m/) != 0) {
+ printf "%s<", substr($0, 1, RSTART-1);
+ codes = substr($0, RSTART+2, RLENGTH-3);
+ if (length(codes) == 0)
+ printf "%s", name(0)
+ else {
+ n = split(codes, ary, ";");
+ sep = "";
+ for (i = 1; i <= n; i++) {
+ printf "%s%s", sep, name(ary[i]);
+ sep = ";"
+ }
+ }
+ printf ">";
+ $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1);
+ }
+ print
+ }
+ '
+}
+
+nul_to_q () {
+ perl -pe 'y/\000/Q/'
+}
+
+q_to_nul () {
+ perl -pe 'y/Q/\000/'
+}
+
+q_to_cr () {
+ tr Q '\015'
+}
+
+q_to_tab () {
+ tr Q '\011'
+}
+
+append_cr () {
+ sed -e 's/$/Q/' | tr Q '\015'
+}
+
+remove_cr () {
+ tr '\015' Q | sed -e 's/Q$//'
+}
+
+# In some bourne shell implementations, the "unset" builtin returns
+# nonzero status when a variable to be unset was not set in the first
+# place.
+#
+# Use sane_unset when that should not be considered an error.
+
+sane_unset () {
+ unset "$@"
+ return 0
+}
+
+test_tick () {
+ if test -z "${test_tick+set}"
+ then
+ test_tick=1112911993
+ else
+ test_tick=$(($test_tick + 60))
+ fi
+ GIT_COMMITTER_DATE="$test_tick -0700"
+ GIT_AUTHOR_DATE="$test_tick -0700"
+ export GIT_COMMITTER_DATE GIT_AUTHOR_DATE
+}
+
+# Stop execution and start a shell. This is useful for debugging tests and
+# only makes sense together with "-v".
+#
+# Be sure to remove all invocations of this command before submitting.
+
+test_pause () {
+ if test "$verbose" = t; then
+ "$SHELL_PATH" <&6 >&3 2>&4
+ else
+ error >&5 "test_pause requires --verbose"
+ fi
+}
+
+# Call test_commit with the arguments "<message> [<file> [<contents>]]"
+#
+# This will commit a file with the given contents and the given commit
+# message. It will also add a tag with <message> as name.
+#
+# Both <file> and <contents> default to <message>.
+
+test_commit () {
+ file=${2:-"$1.t"}
+ echo "${3-$1}" > "$file" &&
+ git add "$file" &&
+ test_tick &&
+ git commit -m "$1" &&
+ git tag "$1"
+}
+
+# Call test_merge with the arguments "<message> <commit>", where <commit>
+# can be a tag pointing to the commit-to-merge.
+
+test_merge () {
+ test_tick &&
+ git merge -m "$1" "$2" &&
+ git tag "$1"
+}
+
+# This function helps systems where core.filemode=false is set.
+# Use it instead of plain 'chmod +x' to set or unset the executable bit
+# of a file in the working directory and add it to the index.
+
+test_chmod () {
+ chmod "$@" &&
+ git update-index --add "--chmod=$@"
+}
+
+# Unset a configuration variable, but don't fail if it doesn't exist.
+test_unconfig () {
+ git config --unset-all "$@"
+ config_status=$?
+ case "$config_status" in
+ 5) # ok, nothing to unset
+ config_status=0
+ ;;
+ esac
+ return $config_status
+}
+
+# Set git config, automatically unsetting it after the test is over.
+test_config () {
+ test_when_finished "test_unconfig '$1'" &&
+ git config "$@"
+}
+
+test_config_global () {
+ test_when_finished "test_unconfig --global '$1'" &&
+ git config --global "$@"
+}
+
+write_script () {
+ {
+ echo "#!${2-"$SHELL_PATH"}" &&
+ cat
+ } >"$1" &&
+ chmod +x "$1"
+}
+
+# Use test_set_prereq to tell that a particular prerequisite is available.
+# The prerequisite can later be checked for in two ways:
+#
+# - Explicitly using test_have_prereq.
+#
+# - Implicitly by specifying the prerequisite tag in the calls to
+# test_expect_{success,failure,code}.
+#
+# The single parameter is the prerequisite tag (a simple word, in all
+# capital letters by convention).
+
+test_set_prereq () {
+ satisfied="$satisfied$1 "
+}
+satisfied=" "
+
+test_have_prereq () {
+ # prerequisites can be concatenated with ','
+ save_IFS=$IFS
+ IFS=,
+ set -- $*
+ IFS=$save_IFS
+
+ total_prereq=0
+ ok_prereq=0
+ missing_prereq=
+
+ for prerequisite
+ do
+ total_prereq=$(($total_prereq + 1))
+ case $satisfied in
+ *" $prerequisite "*)
+ ok_prereq=$(($ok_prereq + 1))
+ ;;
+ *)
+ # Keep a list of missing prerequisites
+ if test -z "$missing_prereq"
+ then
+ missing_prereq=$prerequisite
+ else
+ missing_prereq="$prerequisite,$missing_prereq"
+ fi
+ esac
+ done
+
+ test $total_prereq = $ok_prereq
+}
+
+test_declared_prereq () {
+ case ",$test_prereq," in
+ *,$1,*)
+ return 0
+ ;;
+ esac
+ return 1
+}
+
+test_expect_failure () {
+ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
+ test "$#" = 2 ||
+ error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
+ export test_prereq
+ if ! test_skip "$@"
+ then
+ say >&3 "checking known breakage: $2"
+ if test_run_ "$2" expecting_failure
+ then
+ test_known_broken_ok_ "$1"
+ else
+ test_known_broken_failure_ "$1"
+ fi
+ fi
+ echo >&3 ""
+}
+
+test_expect_success () {
+ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
+ test "$#" = 2 ||
+ error "bug in the test script: not 2 or 3 parameters to test-expect-success"
+ export test_prereq
+ if ! test_skip "$@"
+ then
+ say >&3 "expecting success: $2"
+ if test_run_ "$2"
+ then
+ test_ok_ "$1"
+ else
+ test_failure_ "$@"
+ fi
+ fi
+ echo >&3 ""
+}
+
+# test_external runs external test scripts that provide continuous
+# test output about their progress, and succeeds/fails on
+# zero/non-zero exit code. It outputs the test output on stdout even
+# in non-verbose mode, and announces the external script with "# run
+# <n>: ..." before running it. When providing relative paths, keep in
+# mind that all scripts run in "trash directory".
+# Usage: test_external description command arguments...
+# Example: test_external 'Perl API' perl ../path/to/test.pl
+test_external () {
+ test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq=
+ test "$#" = 3 ||
+ error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
+ descr="$1"
+ shift
+ export test_prereq
+ if ! test_skip "$descr" "$@"
+ then
+ # Announce the script to reduce confusion about the
+ # test output that follows.
+ say_color "" "# run $test_count: $descr ($*)"
+ # Export TEST_DIRECTORY, TRASH_DIRECTORY and GIT_TEST_LONG
+ # to be able to use them in script
+ export TEST_DIRECTORY TRASH_DIRECTORY GIT_TEST_LONG
+ # Run command; redirect its stderr to &4 as in
+ # test_run_, but keep its stdout on our stdout even in
+ # non-verbose mode.
+ "$@" 2>&4
+ if [ "$?" = 0 ]
+ then
+ if test $test_external_has_tap -eq 0; then
+ test_ok_ "$descr"
+ else
+ say_color "" "# test_external test $descr was ok"
+ test_success=$(($test_success + 1))
+ fi
+ else
+ if test $test_external_has_tap -eq 0; then
+ test_failure_ "$descr" "$@"
+ else
+ say_color error "# test_external test $descr failed: $@"
+ test_failure=$(($test_failure + 1))
+ fi
+ fi
+ fi
+}
+
+# Like test_external, but in addition tests that the command generated
+# no output on stderr.
+test_external_without_stderr () {
+ # The temporary file has no (and must have no) security
+ # implications.
+ tmp=${TMPDIR:-/tmp}
+ stderr="$tmp/git-external-stderr.$$.tmp"
+ test_external "$@" 4> "$stderr"
+ [ -f "$stderr" ] || error "Internal error: $stderr disappeared."
+ descr="no stderr: $1"
+ shift
+ say >&3 "# expecting no stderr from previous command"
+ if [ ! -s "$stderr" ]; then
+ rm "$stderr"
+
+ if test $test_external_has_tap -eq 0; then
+ test_ok_ "$descr"
+ else
+ say_color "" "# test_external_without_stderr test $descr was ok"
+ test_success=$(($test_success + 1))
+ fi
+ else
+ if [ "$verbose" = t ]; then
+ output=`echo; echo "# Stderr is:"; cat "$stderr"`
+ else
+ output=
+ fi
+ # rm first in case test_failure exits.
+ rm "$stderr"
+ if test $test_external_has_tap -eq 0; then
+ test_failure_ "$descr" "$@" "$output"
+ else
+ say_color error "# test_external_without_stderr test $descr failed: $@: $output"
+ test_failure=$(($test_failure + 1))
+ fi
+ fi
+}
+
+# debugging-friendly alternatives to "test [-f|-d|-e]"
+# The commands test the existence or non-existence of $1. $2 can be
+# given to provide a more precise diagnosis.
+test_path_is_file () {
+ if ! [ -f "$1" ]
+ then
+ echo "File $1 doesn't exist. $*"
+ false
+ fi
+}
+
+test_path_is_dir () {
+ if ! [ -d "$1" ]
+ then
+ echo "Directory $1 doesn't exist. $*"
+ false
+ fi
+}
+
+test_path_is_missing () {
+ if [ -e "$1" ]
+ then
+ echo "Path exists:"
+ ls -ld "$1"
+ if [ $# -ge 1 ]; then
+ echo "$*"
+ fi
+ false
+ fi
+}
+
+# test_line_count checks that a file has the number of lines it
+# ought to. For example:
+#
+# test_expect_success 'produce exactly one line of output' '
+# do something >output &&
+# test_line_count = 1 output
+# '
+#
+# is like "test $(wc -l <output) = 1" except that it passes the
+# output through when the number of lines is wrong.
+
+test_line_count () {
+ if test $# != 3
+ then
+ error "bug in the test script: not 3 parameters to test_line_count"
+ elif ! test $(wc -l <"$3") "$1" "$2"
+ then
+ echo "test_line_count: line count for $3 !$1 $2"
+ cat "$3"
+ return 1
+ fi
+}
+
+# This is not among top-level (test_expect_success | test_expect_failure)
+# but is a prefix that can be used in the test script, like:
+#
+# test_expect_success 'complain and die' '
+# do something &&
+# do something else &&
+# test_must_fail git checkout ../outerspace
+# '
+#
+# Writing this as "! git checkout ../outerspace" is wrong, because
+# the failure could be due to a segv. We want a controlled failure.
+
+test_must_fail () {
+ "$@"
+ exit_code=$?
+ if test $exit_code = 0; then
+ echo >&2 "test_must_fail: command succeeded: $*"
+ return 1
+ elif test $exit_code -gt 129 -a $exit_code -le 192; then
+ echo >&2 "test_must_fail: died by signal: $*"
+ return 1
+ elif test $exit_code = 127; then
+ echo >&2 "test_must_fail: command not found: $*"
+ return 1
+ fi
+ return 0
+}
+
+# Similar to test_must_fail, but tolerates success, too. This is
+# meant to be used in contexts like:
+#
+# test_expect_success 'some command works without configuration' '
+# test_might_fail git config --unset all.configuration &&
+# do something
+# '
+#
+# Writing "git config --unset all.configuration || :" would be wrong,
+# because we want to notice if it fails due to segv.
+
+test_might_fail () {
+ "$@"
+ exit_code=$?
+ if test $exit_code -gt 129 -a $exit_code -le 192; then
+ echo >&2 "test_might_fail: died by signal: $*"
+ return 1
+ elif test $exit_code = 127; then
+ echo >&2 "test_might_fail: command not found: $*"
+ return 1
+ fi
+ return 0
+}
+
+# Similar to test_must_fail and test_might_fail, but check that a
+# given command exited with a given exit code. Meant to be used as:
+#
+# test_expect_success 'Merge with d/f conflicts' '
+# test_expect_code 1 git merge "merge msg" B master
+# '
+
+test_expect_code () {
+ want_code=$1
+ shift
+ "$@"
+ exit_code=$?
+ if test $exit_code = $want_code
+ then
+ return 0
+ fi
+
+ echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*"
+ return 1
+}
+
+# test_cmp is a helper function to compare actual and expected output.
+# You can use it like:
+#
+# test_expect_success 'foo works' '
+# echo expected >expected &&
+# foo >actual &&
+# test_cmp expected actual
+# '
+#
+# This could be written as either "cmp" or "diff -u", but:
+# - cmp's output is not nearly as easy to read as diff -u
+# - not all diff versions understand "-u"
+
+test_cmp() {
+ $GIT_TEST_CMP "$@"
+}
+
+# This function can be used to schedule some commands to be run
+# unconditionally at the end of the test to restore sanity:
+#
+# test_expect_success 'test core.capslock' '
+# git config core.capslock true &&
+# test_when_finished "git config --unset core.capslock" &&
+# hello world
+# '
+#
+# That would be roughly equivalent to
+#
+# test_expect_success 'test core.capslock' '
+# git config core.capslock true &&
+# hello world
+# git config --unset core.capslock
+# '
+#
+# except that the greeting and config --unset must both succeed for
+# the test to pass.
+#
+# Note that under --immediate mode, no clean-up is done to help diagnose
+# what went wrong.
+
+test_when_finished () {
+ test_cleanup="{ $*
+ } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup"
+}
+
+# Most tests can use the created repository, but some may need to create more.
+# Usage: test_create_repo <directory>
+test_create_repo () {
+ test "$#" = 1 ||
+ error "bug in the test script: not 1 parameter to test-create-repo"
+ repo="$1"
+ mkdir -p "$repo"
+ (
+ cd "$repo" || error "Cannot setup test environment"
+ "$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 ||
+ error "cannot run git init -- have you built things yet?"
+ mv .git/hooks .git/hooks-disabled
+ ) || exit
+}
diff --git a/t/test-lib.sh b/t/test-lib.sh
index e28d5fdebe..d75766adaf 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -55,6 +55,7 @@ unset $(perl -e '
.*_TEST
PROVE
VALGRIND
+ PERF_AGGREGATING_LATER
));
my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env);
print join("\n", @vars);
@@ -98,6 +99,8 @@ _z40=0000000000000000000000000000000000000000
LF='
'
+export _x05 _x40 _z40 LF
+
# Each test should start with something like this, after copyright notices:
#
# test_description='Description of this test...
@@ -223,248 +226,9 @@ die () {
GIT_EXIT_OK=
trap 'die' EXIT
-# The semantics of the editor variables are that of invoking
-# sh -c "$EDITOR \"$@\"" files ...
-#
-# If our trash directory contains shell metacharacters, they will be
-# interpreted if we just set $EDITOR directly, so do a little dance with
-# environment variables to work around this.
-#
-# In particular, quoting isn't enough, as the path may contain the same quote
-# that we're using.
-test_set_editor () {
- FAKE_EDITOR="$1"
- export FAKE_EDITOR
- EDITOR='"$FAKE_EDITOR"'
- export EDITOR
-}
-
-test_decode_color () {
- awk '
- function name(n) {
- if (n == 0) return "RESET";
- if (n == 1) return "BOLD";
- if (n == 30) return "BLACK";
- if (n == 31) return "RED";
- if (n == 32) return "GREEN";
- if (n == 33) return "YELLOW";
- if (n == 34) return "BLUE";
- if (n == 35) return "MAGENTA";
- if (n == 36) return "CYAN";
- if (n == 37) return "WHITE";
- if (n == 40) return "BLACK";
- if (n == 41) return "BRED";
- if (n == 42) return "BGREEN";
- if (n == 43) return "BYELLOW";
- if (n == 44) return "BBLUE";
- if (n == 45) return "BMAGENTA";
- if (n == 46) return "BCYAN";
- if (n == 47) return "BWHITE";
- }
- {
- while (match($0, /\033\[[0-9;]*m/) != 0) {
- printf "%s<", substr($0, 1, RSTART-1);
- codes = substr($0, RSTART+2, RLENGTH-3);
- if (length(codes) == 0)
- printf "%s", name(0)
- else {
- n = split(codes, ary, ";");
- sep = "";
- for (i = 1; i <= n; i++) {
- printf "%s%s", sep, name(ary[i]);
- sep = ";"
- }
- }
- printf ">";
- $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1);
- }
- print
- }
- '
-}
-
-nul_to_q () {
- perl -pe 'y/\000/Q/'
-}
-
-q_to_nul () {
- perl -pe 'y/Q/\000/'
-}
-
-q_to_cr () {
- tr Q '\015'
-}
-
-q_to_tab () {
- tr Q '\011'
-}
-
-append_cr () {
- sed -e 's/$/Q/' | tr Q '\015'
-}
-
-remove_cr () {
- tr '\015' Q | sed -e 's/Q$//'
-}
-
-# In some bourne shell implementations, the "unset" builtin returns
-# nonzero status when a variable to be unset was not set in the first
-# place.
-#
-# Use sane_unset when that should not be considered an error.
-
-sane_unset () {
- unset "$@"
- return 0
-}
-
-test_tick () {
- if test -z "${test_tick+set}"
- then
- test_tick=1112911993
- else
- test_tick=$(($test_tick + 60))
- fi
- GIT_COMMITTER_DATE="$test_tick -0700"
- GIT_AUTHOR_DATE="$test_tick -0700"
- export GIT_COMMITTER_DATE GIT_AUTHOR_DATE
-}
-
-# Stop execution and start a shell. This is useful for debugging tests and
-# only makes sense together with "-v".
-#
-# Be sure to remove all invocations of this command before submitting.
-
-test_pause () {
- if test "$verbose" = t; then
- "$SHELL_PATH" <&6 >&3 2>&4
- else
- error >&5 "test_pause requires --verbose"
- fi
-}
-
-# Call test_commit with the arguments "<message> [<file> [<contents>]]"
-#
-# This will commit a file with the given contents and the given commit
-# message. It will also add a tag with <message> as name.
-#
-# Both <file> and <contents> default to <message>.
-
-test_commit () {
- file=${2:-"$1.t"}
- echo "${3-$1}" > "$file" &&
- git add "$file" &&
- test_tick &&
- git commit -m "$1" &&
- git tag "$1"
-}
-
-# Call test_merge with the arguments "<message> <commit>", where <commit>
-# can be a tag pointing to the commit-to-merge.
-
-test_merge () {
- test_tick &&
- git merge -m "$1" "$2" &&
- git tag "$1"
-}
-
-# This function helps systems where core.filemode=false is set.
-# Use it instead of plain 'chmod +x' to set or unset the executable bit
-# of a file in the working directory and add it to the index.
-
-test_chmod () {
- chmod "$@" &&
- git update-index --add "--chmod=$@"
-}
-
-# Unset a configuration variable, but don't fail if it doesn't exist.
-test_unconfig () {
- git config --unset-all "$@"
- config_status=$?
- case "$config_status" in
- 5) # ok, nothing to unset
- config_status=0
- ;;
- esac
- return $config_status
-}
-
-# Set git config, automatically unsetting it after the test is over.
-test_config () {
- test_when_finished "test_unconfig '$1'" &&
- git config "$@"
-}
-
-
-test_config_global () {
- test_when_finished "test_unconfig --global '$1'" &&
- git config --global "$@"
-}
-
-write_script () {
- {
- echo "#!${2-"$SHELL_PATH"}" &&
- cat
- } >"$1" &&
- chmod +x "$1"
-}
-
-# Use test_set_prereq to tell that a particular prerequisite is available.
-# The prerequisite can later be checked for in two ways:
-#
-# - Explicitly using test_have_prereq.
-#
-# - Implicitly by specifying the prerequisite tag in the calls to
-# test_expect_{success,failure,code}.
-#
-# The single parameter is the prerequisite tag (a simple word, in all
-# capital letters by convention).
-
-test_set_prereq () {
- satisfied="$satisfied$1 "
-}
-satisfied=" "
-
-test_have_prereq () {
- # prerequisites can be concatenated with ','
- save_IFS=$IFS
- IFS=,
- set -- $*
- IFS=$save_IFS
-
- total_prereq=0
- ok_prereq=0
- missing_prereq=
-
- for prerequisite
- do
- total_prereq=$(($total_prereq + 1))
- case $satisfied in
- *" $prerequisite "*)
- ok_prereq=$(($ok_prereq + 1))
- ;;
- *)
- # Keep a list of missing prerequisites
- if test -z "$missing_prereq"
- then
- missing_prereq=$prerequisite
- else
- missing_prereq="$prerequisite,$missing_prereq"
- fi
- esac
- done
-
- test $total_prereq = $ok_prereq
-}
-
-test_declared_prereq () {
- case ",$test_prereq," in
- *,$1,*)
- return 0
- ;;
- esac
- return 1
-}
+# The user-facing functions are loaded from a separate file so that
+# test_perf subshells can have them too
+. "${TEST_DIRECTORY:-.}"/test-lib-functions.sh
# You are not expected to call test_ok_ and test_failure_ directly, use
# the text_expect_* functions instead.
@@ -552,318 +316,16 @@ test_skip () {
esac
}
-test_expect_failure () {
- test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
- test "$#" = 2 ||
- error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
- export test_prereq
- if ! test_skip "$@"
- then
- say >&3 "checking known breakage: $2"
- if test_run_ "$2" expecting_failure
- then
- test_known_broken_ok_ "$1"
- else
- test_known_broken_failure_ "$1"
- fi
- fi
- echo >&3 ""
-}
-
-test_expect_success () {
- test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
- test "$#" = 2 ||
- error "bug in the test script: not 2 or 3 parameters to test-expect-success"
- export test_prereq
- if ! test_skip "$@"
- then
- say >&3 "expecting success: $2"
- if test_run_ "$2"
- then
- test_ok_ "$1"
- else
- test_failure_ "$@"
- fi
- fi
- echo >&3 ""
-}
-
-# test_external runs external test scripts that provide continuous
-# test output about their progress, and succeeds/fails on
-# zero/non-zero exit code. It outputs the test output on stdout even
-# in non-verbose mode, and announces the external script with "# run
-# <n>: ..." before running it. When providing relative paths, keep in
-# mind that all scripts run in "trash directory".
-# Usage: test_external description command arguments...
-# Example: test_external 'Perl API' perl ../path/to/test.pl
-test_external () {
- test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq=
- test "$#" = 3 ||
- error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
- descr="$1"
- shift
- export test_prereq
- if ! test_skip "$descr" "$@"
- then
- # Announce the script to reduce confusion about the
- # test output that follows.
- say_color "" "# run $test_count: $descr ($*)"
- # Export TEST_DIRECTORY, TRASH_DIRECTORY and GIT_TEST_LONG
- # to be able to use them in script
- export TEST_DIRECTORY TRASH_DIRECTORY GIT_TEST_LONG
- # Run command; redirect its stderr to &4 as in
- # test_run_, but keep its stdout on our stdout even in
- # non-verbose mode.
- "$@" 2>&4
- if [ "$?" = 0 ]
- then
- if test $test_external_has_tap -eq 0; then
- test_ok_ "$descr"
- else
- say_color "" "# test_external test $descr was ok"
- test_success=$(($test_success + 1))
- fi
- else
- if test $test_external_has_tap -eq 0; then
- test_failure_ "$descr" "$@"
- else
- say_color error "# test_external test $descr failed: $@"
- test_failure=$(($test_failure + 1))
- fi
- fi
- fi
-}
-
-# Like test_external, but in addition tests that the command generated
-# no output on stderr.
-test_external_without_stderr () {
- # The temporary file has no (and must have no) security
- # implications.
- tmp=${TMPDIR:-/tmp}
- stderr="$tmp/git-external-stderr.$$.tmp"
- test_external "$@" 4> "$stderr"
- [ -f "$stderr" ] || error "Internal error: $stderr disappeared."
- descr="no stderr: $1"
- shift
- say >&3 "# expecting no stderr from previous command"
- if [ ! -s "$stderr" ]; then
- rm "$stderr"
-
- if test $test_external_has_tap -eq 0; then
- test_ok_ "$descr"
- else
- say_color "" "# test_external_without_stderr test $descr was ok"
- test_success=$(($test_success + 1))
- fi
- else
- if [ "$verbose" = t ]; then
- output=`echo; echo "# Stderr is:"; cat "$stderr"`
- else
- output=
- fi
- # rm first in case test_failure exits.
- rm "$stderr"
- if test $test_external_has_tap -eq 0; then
- test_failure_ "$descr" "$@" "$output"
- else
- say_color error "# test_external_without_stderr test $descr failed: $@: $output"
- test_failure=$(($test_failure + 1))
- fi
- fi
-}
-
-# debugging-friendly alternatives to "test [-f|-d|-e]"
-# The commands test the existence or non-existence of $1. $2 can be
-# given to provide a more precise diagnosis.
-test_path_is_file () {
- if ! [ -f "$1" ]
- then
- echo "File $1 doesn't exist. $*"
- false
- fi
-}
-
-test_path_is_dir () {
- if ! [ -d "$1" ]
- then
- echo "Directory $1 doesn't exist. $*"
- false
- fi
-}
-
-test_path_is_missing () {
- if [ -e "$1" ]
- then
- echo "Path exists:"
- ls -ld "$1"
- if [ $# -ge 1 ]; then
- echo "$*"
- fi
- false
- fi
-}
-
-# test_line_count checks that a file has the number of lines it
-# ought to. For example:
-#
-# test_expect_success 'produce exactly one line of output' '
-# do something >output &&
-# test_line_count = 1 output
-# '
-#
-# is like "test $(wc -l <output) = 1" except that it passes the
-# output through when the number of lines is wrong.
-
-test_line_count () {
- if test $# != 3
- then
- error "bug in the test script: not 3 parameters to test_line_count"
- elif ! test $(wc -l <"$3") "$1" "$2"
- then
- echo "test_line_count: line count for $3 !$1 $2"
- cat "$3"
- return 1
- fi
-}
-
-# This is not among top-level (test_expect_success | test_expect_failure)
-# but is a prefix that can be used in the test script, like:
-#
-# test_expect_success 'complain and die' '
-# do something &&
-# do something else &&
-# test_must_fail git checkout ../outerspace
-# '
-#
-# Writing this as "! git checkout ../outerspace" is wrong, because
-# the failure could be due to a segv. We want a controlled failure.
-
-test_must_fail () {
- "$@"
- exit_code=$?
- if test $exit_code = 0; then
- echo >&2 "test_must_fail: command succeeded: $*"
- return 1
- elif test $exit_code -gt 129 -a $exit_code -le 192; then
- echo >&2 "test_must_fail: died by signal: $*"
- return 1
- elif test $exit_code = 127; then
- echo >&2 "test_must_fail: command not found: $*"
- return 1
- fi
- return 0
-}
-
-# Similar to test_must_fail, but tolerates success, too. This is
-# meant to be used in contexts like:
-#
-# test_expect_success 'some command works without configuration' '
-# test_might_fail git config --unset all.configuration &&
-# do something
-# '
-#
-# Writing "git config --unset all.configuration || :" would be wrong,
-# because we want to notice if it fails due to segv.
-
-test_might_fail () {
- "$@"
- exit_code=$?
- if test $exit_code -gt 129 -a $exit_code -le 192; then
- echo >&2 "test_might_fail: died by signal: $*"
- return 1
- elif test $exit_code = 127; then
- echo >&2 "test_might_fail: command not found: $*"
- return 1
- fi
- return 0
-}
-
-# Similar to test_must_fail and test_might_fail, but check that a
-# given command exited with a given exit code. Meant to be used as:
-#
-# test_expect_success 'Merge with d/f conflicts' '
-# test_expect_code 1 git merge "merge msg" B master
-# '
-
-test_expect_code () {
- want_code=$1
- shift
- "$@"
- exit_code=$?
- if test $exit_code = $want_code
- then
- return 0
- fi
-
- echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*"
- return 1
-}
-
-# test_cmp is a helper function to compare actual and expected output.
-# You can use it like:
-#
-# test_expect_success 'foo works' '
-# echo expected >expected &&
-# foo >actual &&
-# test_cmp expected actual
-# '
-#
-# This could be written as either "cmp" or "diff -u", but:
-# - cmp's output is not nearly as easy to read as diff -u
-# - not all diff versions understand "-u"
-
-test_cmp() {
- $GIT_TEST_CMP "$@"
-}
-
-# This function can be used to schedule some commands to be run
-# unconditionally at the end of the test to restore sanity:
-#
-# test_expect_success 'test core.capslock' '
-# git config core.capslock true &&
-# test_when_finished "git config --unset core.capslock" &&
-# hello world
-# '
-#
-# That would be roughly equivalent to
-#
-# test_expect_success 'test core.capslock' '
-# git config core.capslock true &&
-# hello world
-# git config --unset core.capslock
-# '
-#
-# except that the greeting and config --unset must both succeed for
-# the test to pass.
-#
-# Note that under --immediate mode, no clean-up is done to help diagnose
-# what went wrong.
-
-test_when_finished () {
- test_cleanup="{ $*
- } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup"
-}
-
-# Most tests can use the created repository, but some may need to create more.
-# Usage: test_create_repo <directory>
-test_create_repo () {
- test "$#" = 1 ||
- error "bug in the test script: not 1 parameter to test-create-repo"
- repo="$1"
- mkdir -p "$repo"
- (
- cd "$repo" || error "Cannot setup test environment"
- "$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 ||
- error "cannot run git init -- have you built things yet?"
- mv .git/hooks .git/hooks-disabled
- ) || exit
+# stub; perf-lib overrides it
+test_at_end_hook_ () {
+ :
}
test_done () {
GIT_EXIT_OK=t
if test -z "$HARNESS_ACTIVE"; then
- test_results_dir="$TEST_DIRECTORY/test-results"
+ test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results"
mkdir -p "$test_results_dir"
test_results_path="$test_results_dir/${0%.sh}-$$.counts"
@@ -902,6 +364,8 @@ test_done () {
cd "$(dirname "$remove_trash")" &&
rm -rf "$(basename "$remove_trash")"
+ test_at_end_hook_
+
exit 0 ;;
*)
@@ -924,6 +388,12 @@ then
# itself.
TEST_DIRECTORY=$(pwd)
fi
+if test -z "$TEST_OUTPUT_DIRECTORY"
+then
+ # Similarly, override this to store the test-results subdir
+ # elsewhere
+ TEST_OUTPUT_DIRECTORY=$TEST_DIRECTORY
+fi
GIT_BUILD_DIR="$TEST_DIRECTORY"/..
if test -n "$valgrind"
@@ -1059,7 +529,7 @@ test="trash directory.$(basename "$0" .sh)"
test -n "$root" && test="$root/$test"
case "$test" in
/*) TRASH_DIRECTORY="$test" ;;
- *) TRASH_DIRECTORY="$TEST_DIRECTORY/$test" ;;
+ *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$test" ;;
esac
test ! -z "$debug" || remove_trash=$TRASH_DIRECTORY
rm -fr "$test" || {
@@ -1071,7 +541,11 @@ rm -fr "$test" || {
HOME="$TRASH_DIRECTORY"
export HOME
-test_create_repo "$test"
+if test -z "$TEST_NO_CREATE_REPO"; then
+ test_create_repo "$test"
+else
+ mkdir -p "$test"
+fi
# Use -P to resolve symlinks in our working directory so that the cwd
# in subprocesses like git equals our $PWD (for pathname comparisons).
cd -P "$test" || exit 1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 04:00:47 +0000