diff options
Diffstat (limited to 't')
153 files changed, 4046 insertions, 1150 deletions
@@ -154,6 +154,7 @@ appropriately before running "make". As the names depend on the tests' file names, it is safe to run the tests with this option in parallel. +-V:: --verbose-log:: Write verbose output to the same logfile as `--tee`, but do _not_ write it to stdout. Unlike `--tee --verbose`, this option @@ -301,6 +302,12 @@ that cannot be easily covered by a few specific test cases. These could be enabled by running the test suite with correct GIT_TEST_ environment set. +GIT_TEST_GETTEXT_POISON=<non-empty?> turns all strings marked for +translation into gibberish if non-empty (think "test -n"). Used for +spotting those tests that need to be marked with a C_LOCALE_OUTPUT +prerequisite when adding more strings for translation. See "Testing +marked strings" in po/README for details. + GIT_TEST_SPLIT_INDEX=<boolean> forces split-index mode on the whole test suite. Accept any boolean values that are accepted by git-config. @@ -315,7 +322,7 @@ packs on demand. This normally only happens when the object size is over 2GB. This variable forces the code path on any object larger than <n> bytes. -GIT_TEST_OE_DELTA_SIZE=<n> exercises the uncomon pack-objects code +GIT_TEST_OE_DELTA_SIZE=<n> exercises the uncommon pack-objects code path where deltas larger than this limit require extra memory allocation for bookkeeping. @@ -327,6 +334,30 @@ GIT_TEST_COMMIT_GRAPH=<boolean>, when true, forces the commit-graph to be written after every 'git commit' command, and overrides the 'core.commitGraph' setting to true. +GIT_TEST_FSMONITOR=$PWD/t7519/fsmonitor-all exercises the fsmonitor +code path for utilizing a file system monitor to speed up detecting +new or changed files. + +GIT_TEST_INDEX_VERSION=<n> exercises the index read/write code path +for the index version specified. Can be set to any valid version +(currently 2, 3, or 4). + +GIT_TEST_PRELOAD_INDEX=<boolean> exercises the preload-index code path +by overriding the minimum number of cache entries required per thread. + +GIT_TEST_REBASE_USE_BUILTIN=<boolean>, when false, disables the +builtin version of git-rebase. See 'rebase.useBuiltin' in +git-config(1). + +GIT_TEST_INDEX_THREADS=<n> enables exercising the multi-threaded loading +of the index for the whole test suite by bypassing the default number of +cache entries and thread minimums. Setting this to 1 will make the +index loading single threaded. + +GIT_TEST_MULTI_PACK_INDEX=<boolean>, when true, forces the multi-pack- +index to be written after every 'git repack' command, and overrides the +'core.multiPackIndex' setting to true. + Naming Tests ------------ @@ -401,13 +432,13 @@ This test harness library does the following things: consistently when command line arguments --verbose (or -v), --debug (or -d), and --immediate (or -i) is given. -Do's, don'ts & things to keep in mind -------------------------------------- +Do's & don'ts +------------- Here are a few examples of things you probably should and shouldn't do when writing tests. -Do: +Here are the "do's:" - Put all code inside test_expect_success and other assertions. @@ -452,16 +483,21 @@ Do: Windows, where the shell (MSYS bash) mangles absolute path names. For details, see the commit message of 4114156ae9. -Don't: + - Remember that inside the <script> part, the standard output and + standard error streams are discarded, and the test harness only + reports "ok" or "not ok" to the end user running the tests. Under + --verbose, they are shown to help debug the tests. + +And here are the "don'ts:" - - exit() within a <script> part. + - Don't exit() within a <script> part. The harness will catch this as a programming error of the test. Use test_done instead if you need to stop the tests early (see "Skipping tests" below). - - use '! git cmd' when you want to make sure the git command exits - with failure in a controlled way by calling "die()". Instead, + - Don't use '! git cmd' when you want to make sure the git command + exits with failure in a controlled way by calling "die()". Instead, use 'test_must_fail git cmd'. This will signal a failure if git dies in an unexpected way (e.g. segfault). @@ -469,8 +505,35 @@ Don't: platform commands; just use '! cmd'. We are not in the business of verifying that the world given to us sanely works. - - use perl without spelling it as "$PERL_PATH". This is to help our - friends on Windows where the platform Perl often adds CR before + - Don't feed the output of a git command to a pipe, as in: + + git -C repo ls-files | + xargs -n 1 basename | + grep foo + + which will discard git's exit code and may mask a crash. In the + above example, all exit codes are ignored except grep's. + + Instead, write the output of that command to a temporary + file with ">" or assign it to a variable with "x=$(git ...)" rather + than pipe it. + + - Don't use command substitution in a way that discards git's exit + code. When assigning to a variable, the exit code is not discarded, + e.g.: + + x=$(git cat-file -p $sha) && + ... + + is OK because a crash in "git cat-file" will cause the "&&" chain + to fail, but: + + test "refs/heads/foo" = "$(git symbolic-ref HEAD)" + + is not OK and a crash in git could go undetected. + + - Don't use perl without spelling it as "$PERL_PATH". This is to help + our friends on Windows where the platform Perl often adds CR before the end of line, and they bundle Git with a version of Perl that does not do so, whose path is specified with $PERL_PATH. Note that we provide a "perl" function which uses $PERL_PATH under the hood, so @@ -478,17 +541,17 @@ Don't: (but you do, for example, on a shebang line or in a sub script created via "write_script"). - - use sh without spelling it as "$SHELL_PATH", when the script can - be misinterpreted by broken platform shell (e.g. Solaris). + - Don't use sh without spelling it as "$SHELL_PATH", when the script + can be misinterpreted by broken platform shell (e.g. Solaris). - - chdir around in tests. It is not sufficient to chdir to + - Don't chdir around in tests. It is not sufficient to chdir to somewhere and then chdir back to the original location later in the test, as any intermediate step can fail and abort the test, causing the next test to start in an unexpected directory. Do so inside a subshell if necessary. - - save and verify the standard error of compound commands, i.e. group - commands, subshells, and shell functions (except test helper + - Don't save and verify the standard error of compound commands, i.e. + group commands, subshells, and shell functions (except test helper functions like 'test_must_fail') like this: ( cd dir && git cmd ) 2>error && @@ -503,7 +566,7 @@ Don't: ( cd dir && git cmd 2>../error ) && test_cmp expect error - - Break the TAP output + - Don't break the TAP output The raw output from your test may be interpreted by a TAP harness. TAP harnesses will ignore everything they don't know about, but don't step @@ -523,13 +586,6 @@ Don't: but the best indication is to just run the tests with prove(1), it'll complain if anything is amiss. -Keep in mind: - - - Inside the <script> part, the standard output and standard error - streams are discarded, and the test harness only reports "ok" or - "not ok" to the end user running the tests. Under --verbose, they - are shown to help debugging the tests. - Skipping tests -------------- @@ -814,6 +870,28 @@ library for your script to use. the symbolic link in the file system and a part that does; then only the latter part need be protected by a SYMLINKS prerequisite (see below). + - test_oid_init + + This function loads facts and useful object IDs related to the hash + algorithm(s) in use from the files in t/oid-info. + + - test_oid_cache + + This function reads per-hash algorithm information from standard + input (usually a heredoc) in the format described in + t/oid-info/README. This is useful for test-specific values, such as + object IDs, which must vary based on the hash algorithm. + + Certain fixed values, such as hash sizes and common placeholder + object IDs, can be loaded with test_oid_init (described above). + + - test_oid <key> + + This function looks up a value for the hash algorithm in use, based + on the key given. The value must have been loaded using + test_oid_init or test_oid_cache. Providing an unknown key is an + error. + Prerequisites ------------- diff --git a/t/helper/test-dump-fsmonitor.c b/t/helper/test-dump-fsmonitor.c index ad452707e8..08e3684aff 100644 --- a/t/helper/test-dump-fsmonitor.c +++ b/t/helper/test-dump-fsmonitor.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int ac, const char **av) +int cmd__dump_fsmonitor(int ac, const char **av) { struct index_state *istate = &the_index; int i; diff --git a/t/helper/test-dump-untracked-cache.c b/t/helper/test-dump-untracked-cache.c index bd92fb305a..52870ebbb3 100644 --- a/t/helper/test-dump-untracked-cache.c +++ b/t/helper/test-dump-untracked-cache.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "dir.h" @@ -38,7 +39,7 @@ static void dump(struct untracked_cache_dir *ucd, struct strbuf *base) strbuf_setlen(base, len); } -int cmd_main(int ac, const char **av) +int cmd__dump_untracked_cache(int ac, const char **av) { struct untracked_cache *uc; struct strbuf base = STRBUF_INIT; diff --git a/t/helper/test-parse-options.c b/t/helper/test-parse-options.c index 630c76d127..47fee660b8 100644 --- a/t/helper/test-parse-options.c +++ b/t/helper/test-parse-options.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "parse-options.h" #include "string-list.h" @@ -35,6 +36,7 @@ static int length_callback(const struct option *opt, const char *arg, int unset) static int number_callback(const struct option *opt, const char *arg, int unset) { + BUG_ON_OPT_NEG(unset); *(int *)opt->value = strtol(arg, NULL, 10); return 0; } @@ -94,11 +96,11 @@ static void show(struct string_list *expect, int *status, const char *fmt, ...) strbuf_release(&buf); } -int cmd_main(int argc, const char **argv) +int cmd__parse_options(int argc, const char **argv) { const char *prefix = "prefix/"; const char *usage[] = { - "test-parse-options <options>", + "test-tool parse-options <options>", "", "A helper function for the parse-options API.", NULL @@ -118,7 +120,6 @@ int cmd_main(int argc, const char **argv) OPT_INTEGER('j', NULL, &integer, "get a integer, too"), OPT_MAGNITUDE('m', "magnitude", &magnitude, "get a magnitude"), OPT_SET_INT(0, "set23", &integer, "set integer to 23", 23), - OPT_DATE('t', NULL, ×tamp, "get timestamp of <time>"), OPT_CALLBACK('L', "length", &integer, "str", "get length of <str>", length_callback), OPT_FILENAME('F', "file", &file, "set file to <file>"), diff --git a/t/helper/test-pkt-line.c b/t/helper/test-pkt-line.c index 30775f986f..282d536384 100644 --- a/t/helper/test-pkt-line.c +++ b/t/helper/test-pkt-line.c @@ -1,4 +1,5 @@ #include "cache.h" +#include "test-tool.h" #include "pkt-line.h" static void pack_line(const char *line) @@ -79,7 +80,7 @@ static void unpack_sideband(void) } } -int cmd_main(int argc, const char **argv) +int cmd__pkt_line(int argc, const char **argv) { if (argc < 2) die("too few arguments"); diff --git a/t/helper/test-prio-queue.c b/t/helper/test-prio-queue.c index 9807b649b1..5bc9c46ea5 100644 --- a/t/helper/test-prio-queue.c +++ b/t/helper/test-prio-queue.c @@ -22,14 +22,24 @@ int cmd__prio_queue(int argc, const char **argv) struct prio_queue pq = { intcmp }; while (*++argv) { - if (!strcmp(*argv, "get")) - show(prio_queue_get(&pq)); - else if (!strcmp(*argv, "dump")) { - int *v; - while ((v = prio_queue_get(&pq))) - show(v); - } - else { + if (!strcmp(*argv, "get")) { + void *peek = prio_queue_peek(&pq); + void *get = prio_queue_get(&pq); + if (peek != get) + BUG("peek and get results do not match"); + show(get); + } else if (!strcmp(*argv, "dump")) { + void *peek; + void *get; + while ((peek = prio_queue_peek(&pq))) { + get = prio_queue_get(&pq); + if (peek != get) + BUG("peek and get results do not match"); + show(get); + } + } else if (!strcmp(*argv, "stack")) { + pq.compare = NULL; + } else { int *v = malloc(sizeof(*v)); *v = atoi(*argv); prio_queue_put(&pq, v); diff --git a/t/helper/test-reach.c b/t/helper/test-reach.c index 08d2ea68e8..a0272178b7 100644 --- a/t/helper/test-reach.c +++ b/t/helper/test-reach.c @@ -32,8 +32,8 @@ int cmd__reach(int ac, const char **av) struct commit *A, *B; struct commit_list *X, *Y; struct object_array X_obj = OBJECT_ARRAY_INIT; - struct commit **X_array; - int X_nr, X_alloc; + struct commit **X_array, **Y_array; + int X_nr, X_alloc, Y_nr, Y_alloc; struct strbuf buf = STRBUF_INIT; struct repository *r = the_repository; @@ -44,9 +44,10 @@ int cmd__reach(int ac, const char **av) A = B = NULL; X = Y = NULL; - X_nr = 0; - X_alloc = 16; + X_nr = Y_nr = 0; + X_alloc = Y_alloc = 16; ALLOC_ARRAY(X_array, X_alloc); + ALLOC_ARRAY(Y_array, Y_alloc); while (strbuf_getline(&buf, stdin) != EOF) { struct object_id oid; @@ -92,6 +93,8 @@ int cmd__reach(int ac, const char **av) case 'Y': commit_list_insert(c, &Y); + ALLOC_GROW(Y_array, Y_nr + 1, Y_alloc); + Y_array[Y_nr++] = c; break; default: @@ -136,6 +139,29 @@ int cmd__reach(int ac, const char **av) filter.with_commit_tag_algo = 0; printf("%s(_,A,X,_):%d\n", av[1], commit_contains(&filter, A, X, &cache)); + } else if (!strcmp(av[1], "get_reachable_subset")) { + const int reachable_flag = 1; + int i, count = 0; + struct commit_list *current; + struct commit_list *list = get_reachable_subset(X_array, X_nr, + Y_array, Y_nr, + reachable_flag); + printf("get_reachable_subset(X,Y)\n"); + for (current = list; current; current = current->next) { + if (!(list->item->object.flags & reachable_flag)) + die(_("commit %s is not marked reachable"), + oid_to_hex(&list->item->object.oid)); + count++; + } + for (i = 0; i < Y_nr; i++) { + if (Y_array[i]->object.flags & reachable_flag) + count--; + } + + if (count < 0) + die(_("too many commits marked reachable")); + + print_sorted_commit_ids(list); } exit(0); diff --git a/t/helper/test-repository.c b/t/helper/test-repository.c index 2762ca6562..6a84a53efb 100644 --- a/t/helper/test-repository.c +++ b/t/helper/test-repository.c @@ -15,7 +15,10 @@ static void test_parse_commit_in_graph(const char *gitdir, const char *worktree, struct commit *c; struct commit_list *parent; - repo_init(&r, gitdir, worktree); + setup_git_env(gitdir); + + if (repo_init(&r, gitdir, worktree)) + die("Couldn't init repo"); c = lookup_commit(&r, commit_oid); @@ -38,7 +41,10 @@ static void test_get_commit_tree_in_graph(const char *gitdir, struct commit *c; struct tree *tree; - repo_init(&r, gitdir, worktree); + setup_git_env(gitdir); + + if (repo_init(&r, gitdir, worktree)) + die("Couldn't init repo"); c = lookup_commit(&r, commit_oid); diff --git a/t/helper/test-revision-walking.c b/t/helper/test-revision-walking.c index 4f8bc75821..625b2dbf82 100644 --- a/t/helper/test-revision-walking.c +++ b/t/helper/test-revision-walking.c @@ -32,7 +32,7 @@ static int run_revision_walk(void) int argc = ARRAY_SIZE(argv) - 1; int got_revision = 0; - init_revisions(&rev, NULL); + repo_init_revisions(the_repository, &rev, NULL); setup_revisions(argc, argv, &rev, NULL); if (prepare_revision_walk(&rev)) die("revision walk setup failed"); diff --git a/t/helper/test-submodule-nested-repo-config.c b/t/helper/test-submodule-nested-repo-config.c new file mode 100644 index 0000000000..a31e2a9bea --- /dev/null +++ b/t/helper/test-submodule-nested-repo-config.c @@ -0,0 +1,30 @@ +#include "test-tool.h" +#include "submodule-config.h" + +static void die_usage(int argc, const char **argv, const char *msg) +{ + fprintf(stderr, "%s\n", msg); + fprintf(stderr, "Usage: %s <submodulepath> <config name>\n", argv[0]); + exit(1); +} + +int cmd__submodule_nested_repo_config(int argc, const char **argv) +{ + struct repository submodule; + + if (argc < 3) + die_usage(argc, argv, "Wrong number of arguments."); + + setup_git_directory(); + + if (repo_submodule_init(&submodule, the_repository, argv[1])) { + die_usage(argc, argv, "Submodule not found."); + } + + /* Read the config of _child_ submodules. */ + print_config_from_gitmodules(&submodule, argv[2]); + + submodule_free(the_repository); + + return 0; +} diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c index b87a8c1f22..bfb195b1a8 100644 --- a/t/helper/test-tool.c +++ b/t/helper/test-tool.c @@ -14,7 +14,9 @@ static struct test_cmd cmds[] = { { "delta", cmd__delta }, { "drop-caches", cmd__drop_caches }, { "dump-cache-tree", cmd__dump_cache_tree }, + { "dump-fsmonitor", cmd__dump_fsmonitor }, { "dump-split-index", cmd__dump_split_index }, + { "dump-untracked-cache", cmd__dump_untracked_cache }, { "example-decorate", cmd__example_decorate }, { "genrandom", cmd__genrandom }, { "hashmap", cmd__hashmap }, @@ -25,7 +27,9 @@ static struct test_cmd cmds[] = { { "mergesort", cmd__mergesort }, { "mktemp", cmd__mktemp }, { "online-cpus", cmd__online_cpus }, + { "parse-options", cmd__parse_options }, { "path-utils", cmd__path_utils }, + { "pkt-line", cmd__pkt_line }, { "prio-queue", cmd__prio_queue }, { "reach", cmd__reach }, { "read-cache", cmd__read_cache }, @@ -36,12 +40,13 @@ static struct test_cmd cmds[] = { { "revision-walking", cmd__revision_walking }, { "run-command", cmd__run_command }, { "scrap-cache-tree", cmd__scrap_cache_tree }, - { "sha1-array", cmd__sha1_array }, { "sha1", cmd__sha1 }, + { "sha1-array", cmd__sha1_array }, { "sigchain", cmd__sigchain }, { "strcmp-offset", cmd__strcmp_offset }, { "string-list", cmd__string_list }, { "submodule-config", cmd__submodule_config }, + { "submodule-nested-repo-config", cmd__submodule_nested_repo_config }, { "subprocess", cmd__subprocess }, { "urlmatch-normalization", cmd__urlmatch_normalization }, { "wildmatch", cmd__wildmatch }, @@ -51,13 +56,23 @@ static struct test_cmd cmds[] = { { "write-cache", cmd__write_cache }, }; +static NORETURN void die_usage(void) +{ + size_t i; + + fprintf(stderr, "usage: test-tool <toolname> [args]\n"); + for (i = 0; i < ARRAY_SIZE(cmds); i++) + fprintf(stderr, " %s\n", cmds[i].name); + exit(128); +} + int cmd_main(int argc, const char **argv) { int i; BUG_exit_code = 99; if (argc < 2) - die("I need a test name!"); + die_usage(); for (i = 0; i < ARRAY_SIZE(cmds); i++) { if (!strcmp(cmds[i].name, argv[1])) { @@ -66,5 +81,6 @@ int cmd_main(int argc, const char **argv) return cmds[i].fn(argc, argv); } } - die("There is no test named '%s'", argv[1]); + error("there is no tool named '%s'", argv[1]); + die_usage(); } diff --git a/t/helper/test-tool.h b/t/helper/test-tool.h index e074957279..042f12464b 100644 --- a/t/helper/test-tool.h +++ b/t/helper/test-tool.h @@ -1,5 +1,5 @@ -#ifndef __TEST_TOOL_H__ -#define __TEST_TOOL_H__ +#ifndef TEST_TOOL_H +#define TEST_TOOL_H #include "git-compat-util.h" @@ -10,7 +10,9 @@ int cmd__date(int argc, const char **argv); int cmd__delta(int argc, const char **argv); int cmd__drop_caches(int argc, const char **argv); int cmd__dump_cache_tree(int argc, const char **argv); +int cmd__dump_fsmonitor(int argc, const char **argv); int cmd__dump_split_index(int argc, const char **argv); +int cmd__dump_untracked_cache(int argc, const char **argv); int cmd__example_decorate(int argc, const char **argv); int cmd__genrandom(int argc, const char **argv); int cmd__hashmap(int argc, const char **argv); @@ -21,7 +23,9 @@ int cmd__match_trees(int argc, const char **argv); int cmd__mergesort(int argc, const char **argv); int cmd__mktemp(int argc, const char **argv); int cmd__online_cpus(int argc, const char **argv); +int cmd__parse_options(int argc, const char **argv); int cmd__path_utils(int argc, const char **argv); +int cmd__pkt_line(int argc, const char **argv); int cmd__prio_queue(int argc, const char **argv); int cmd__reach(int argc, const char **argv); int cmd__read_cache(int argc, const char **argv); @@ -32,12 +36,13 @@ int cmd__repository(int argc, const char **argv); int cmd__revision_walking(int argc, const char **argv); int cmd__run_command(int argc, const char **argv); int cmd__scrap_cache_tree(int argc, const char **argv); -int cmd__sha1_array(int argc, const char **argv); int cmd__sha1(int argc, const char **argv); +int cmd__sha1_array(int argc, const char **argv); int cmd__sigchain(int argc, const char **argv); int cmd__strcmp_offset(int argc, const char **argv); int cmd__string_list(int argc, const char **argv); int cmd__submodule_config(int argc, const char **argv); +int cmd__submodule_nested_repo_config(int argc, const char **argv); int cmd__subprocess(int argc, const char **argv); int cmd__urlmatch_normalization(int argc, const char **argv); int cmd__wildmatch(int argc, const char **argv); diff --git a/t/lib-gettext.sh b/t/lib-gettext.sh index eec757f104..2139b427ca 100644 --- a/t/lib-gettext.sh +++ b/t/lib-gettext.sh @@ -10,9 +10,14 @@ GIT_TEXTDOMAINDIR="$GIT_BUILD_DIR/po/build/locale" GIT_PO_PATH="$GIT_BUILD_DIR/po" export GIT_TEXTDOMAINDIR GIT_PO_PATH -. "$GIT_BUILD_DIR"/git-sh-i18n +if test -n "$GIT_TEST_INSTALLED" +then + . "$(git --exec-path)"/git-sh-i18n +else + . "$GIT_BUILD_DIR"/git-sh-i18n +fi -if test_have_prereq GETTEXT && ! test_have_prereq GETTEXT_POISON +if test_have_prereq GETTEXT && test_have_prereq C_LOCALE_OUTPUT then # is_IS.UTF-8 on Solaris and FreeBSD, is_IS.utf8 on Debian is_IS_locale=$(locale -a 2>/dev/null | diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index 3fe02876c1..f1277bef4f 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -57,9 +57,12 @@ then echo | gpgsm --homedir "${GNUPGHOME}" 2>/dev/null \ --passphrase-fd 0 --pinentry-mode loopback \ --import "$TEST_DIRECTORY"/lib-gpg/gpgsm_cert.p12 && - gpgsm --homedir "${GNUPGHOME}" 2>/dev/null -K \ - | grep fingerprint: | cut -d" " -f4 | tr -d '\n' > \ - ${GNUPGHOME}/trustlist.txt && + + gpgsm --homedir "${GNUPGHOME}" 2>/dev/null -K | + grep fingerprint: | + cut -d" " -f4 | + tr -d '\n' >"${GNUPGHOME}/trustlist.txt" && + echo " S relax" >> ${GNUPGHOME}/trustlist.txt && (gpgconf --kill gpg-agent >/dev/null 2>&1 || : ) && echo hello | gpgsm --homedir "${GNUPGHOME}" >/dev/null \ diff --git a/t/lib-gpg/keyring.gpg b/t/lib-gpg/keyring.gpg index d4754a1f19..918dfce332 100644 --- a/t/lib-gpg/keyring.gpg +++ b/t/lib-gpg/keyring.gpg @@ -30,7 +30,6 @@ Cezx4Q2khACcCs+/LtE8Lb9hC+2cvr3uH5p82AI= =aEiU -----END PGP PRIVATE KEY BLOCK----- -----BEGIN PGP PRIVATE KEY BLOCK----- -Version: GnuPG v1 lQOYBFFMlkcBCADJi/xnAF8yI34PHilSCbM7VtOFO17oFMkpu4cgN2QpPuM5MVjy cvrzKSguZFvPCDLzeAFJW1uPxL4SHaHSkisCrFhijH7OJWcOPNPSFCwu+inAoAsv @@ -83,11 +82,43 @@ fn1sY/IG5atoKK+ypmV/TlBlMZqFQzuPIJQT8VLbmxtLlDhJG04LbI6c8axIZxOO ZKLy5nTTSy16ztqEeS7eifHLPZg1UFFyEEIQ1XW0CNDAeuWKh90ERjyl4Cg7PnWS Z9Ei+zj6JD5Pcdi3BJhQo9WOLOVEJ0NHmewTYqk9QVXH/0v1Hdl4LMJtgcbdbDWk 4UTkXbg9pn3umCgkNJ3Vs8fWnIWO9Izdr2/wrFY2JvUT7Yvl+wsNIWatvOEzGy7n -BOW78WUxzhu0YJTLKy+iKCjg5HS5dx6OC+e4aEEgfhNPCMkbvDsJjtQ= -=hieJ +BOW78WUxzhu0YJTLKy+iKCjg5HS5dx6OC+e4aEEgfhNPCMkbvDsJjtSdA5gEW967 +3AEIAKjseT0sTQjyN39fOn0fzxWp89REMUUKgLigb01MKuuNI3cedBZsz3hpFOKV +cii5rldw8uf3yS3Okht2DfHPSD4NrGzLGEzSTpQ10S8N2q0DUYwyLU6C0U8HnMZm +/n+lCGBbUoxvnruohAvKAjpHO3rmJ8D4De9hlWg/fwdAxQQ0Sve0kN8Vwk2p1GuO +OWQKV1SU9c+kBiou7dewQmbilPRanKmP5ZSU4emhpTOMlJFXF+kmYSODQk1cMvWW +Ob3ttll2llX0Gul7Sjf+haq/FcRyRk7Tw5MHwZjr5aWiCny0/0+byvfF6SBIfzyE +qlyWURQ2gHZUqSiG3QPMZiYr04cAEQEAAQAH/Am4rv/oQF6wodgz5y4zc6JJiTDA +4+nKdIuR7OKqUxk1oo7eZjJML/xvMumygNyUvJ9nodl1SlMKilOhdAswfkKj9gJY +BdDJLm1OufhW3pJwy6ahbjeqEgwJFVENtSPF0zkuyED9kElrpbD2ZTGfzwdM0e9D +10ZDFWtODCw8rzOFcijujgI8oilLtxSNrkkTKW+25WJFRNPSHgIkMIm8UlPAG+rj +3Yj9UqodeXTSvXwG2zceOxjFJadV77sOFJDgwWslN6J8El4+GcgwFVepJxoZEj7e +cKkmVr0Dc9/Q04D5dWATc1FYcIhZbTu3oImCAh45ep4u9WYLUV5PGyeMviEEAMwo +mJbYBxWuPjpNa722HQcbvMUiZWWDwHfLCib/SaP0AgfDahid8/PcZwxOPHPByBrm +GDi0z7ibn/pgJr07kpp1Cic9ntfc2FvkI0QMzG0EuiekzQyPEnzjoDHF+V4nJIj2 +GWVjLYYqlZWEmhsfKt1CnlPXBunKoDJ30ABPcHJ/BADT0WxAIVKF4lO2HlrDVP44 +bufBEG9Ct7dl/G08Qve4Ag3VEZpT82vEFp0LzX0mTCDIUKJUYAYLxAIPhP7IvIfc +EZXrwyDUxU7YSgKTHMKo9nFC6fIc1GeGPRalIF1gmTY32qlYJC6y5BTDhZNV5ydG +u8QL2P/orP7XuRrJyeyK+QP/XTekr/DS6Jkct826MPA52ciIkWVgYLatH5fO4HCq +ssDU8vz7FbbvGs0G1Xn7GA4m9dNYVOZtKwX++3nf2IEOpgPiZVTn/nP2u3HutpJb +/HMLlcfZGiGdxS6n/vdz6wsEobJoi6STkHkA+VFNOSZmdsw6eKl3X911tpCTYfOG +2U47/IkCbAQYAQgAIBYhBNS+IjEa0xMeXtoppGEJLoW3InGJBQJb3rvcAhsCAUAJ +EGEJLoW3InGJwHQgBBkBCAAdFiEE+DZKWeB//p9NYwBaZaDuoC4wytcFAlveu9wA +CgkQZaDuoC4wytcD9gf/WigtHl7lFyl8RaE/uqROFEelZyM00v1h55fd/IGRG88E +tN0Lr4FaqBqPkMZjU/LN9UMBaTd+748vHlHaweZqljXJu99CO9Id7Y4w7WzF3C3Y +yQsGZ92EGxthsPK0+rhHV0MbaINupI1oO9gATFglSxq17o83FJatGRjaXCZau8jr +57/By1MGtjk+Iq1NkzGkrX778LdRQGLKDw2Qa7lsdHY8d3lUPAH8mbb97ELmIc9t +PG2aM7ATJL7nBmFuTHo6hmEcIw32Ei9KK1zxM0ZylEYkjBjHAlklWmKb9MiayMC5 +uHW7Iyhjl+NbgbIEr2JTamW/9tL6UrIIxiDEdqaHNfCaB/9D+V31Upcohc9azwB4 +AF8diQwt5nfiVpnVeF/W8+eS1By2W6QrwLNthNRabYFnuSf9USHAY6atDWe+egId +MLIv4ce0i3ykoczSu0oMoUCMxdl9kQrsNHZCqWX/OiDDLSb05u/P/3he900y6tSB +15MbIPA6i5Bw/693nHguqxS1ASbBB/LiIu3vCXdFEs9RMvIJ+qkP3xQA96oImQiK +R3U6OGv593eONKijUINNqHRq6+UxIyJ+OCAi+L2QTidAhJLRCp6EZD96u02cthYq +8KA8j1+rx9BcbeacVVHepeG1JsgxsXX8BTJ7ZuS5VVndZOjag8URW/9nJMf01w/h +el64 +=Iv7W -----END PGP PRIVATE KEY BLOCK----- -----BEGIN PGP PUBLIC KEY BLOCK----- -Version: GnuPG v1 mQGiBEZnyykRBACzCPjIpTYNL7Y2tQqlEGTTDlvZcWNLjF5f7ZzuyOqNOidLUgFD 36qch1LZLSZkShdR3Gae+bsolyjxrlFuFP0eXRPMtqK20aLw7WZvPFpEV1ThMne+ @@ -137,6 +168,25 @@ bGPyBuWraCivsqZlf05QZTGahUM7jyCUE/FS25sbS5Q4SRtOC2yOnPGsSGcTjmSi 8uZ000stes7ahHku3onxyz2YNVBRchBCENV1tAjQwHrliofdBEY8peAoOz51kmfR Ivs4+iQ+T3HYtwSYUKPVjizlRCdDR5nsE2KpPUFVx/9L9R3ZeCzCbYHG3Ww1pOFE 5F24PaZ97pgoJDSd1bPH1pyFjvSM3a9v8KxWNib1E+2L5fsLDSFmrbzhMxsu5wTl -u/FlMc4btGCUyysvoigo4OR0uXcejgvnuGhBIH4TTwjJG7w7CY7U -=iYv/ +u/FlMc4btGCUyysvoigo4OR0uXcejgvnuGhBIH4TTwjJG7w7CY7UuQENBFveu9wB +CACo7Hk9LE0I8jd/Xzp9H88VqfPURDFFCoC4oG9NTCrrjSN3HnQWbM94aRTilXIo +ua5XcPLn98ktzpIbdg3xz0g+DaxsyxhM0k6UNdEvDdqtA1GMMi1OgtFPB5zGZv5/ +pQhgW1KMb567qIQLygI6Rzt65ifA+A3vYZVoP38HQMUENEr3tJDfFcJNqdRrjjlk +CldUlPXPpAYqLu3XsEJm4pT0Wpypj+WUlOHpoaUzjJSRVxfpJmEjg0JNXDL1ljm9 +7bZZdpZV9Brpe0o3/oWqvxXEckZO08OTB8GY6+Wlogp8tP9Pm8r3xekgSH88hKpc +llEUNoB2VKkoht0DzGYmK9OHABEBAAGJAmwEGAEIACAWIQTUviIxGtMTHl7aKaRh +CS6FtyJxiQUCW9673AIbAgFACRBhCS6FtyJxicB0IAQZAQgAHRYhBPg2Slngf/6f +TWMAWmWg7qAuMMrXBQJb3rvcAAoJEGWg7qAuMMrXA/YH/1ooLR5e5RcpfEWhP7qk +ThRHpWcjNNL9YeeX3fyBkRvPBLTdC6+BWqgaj5DGY1PyzfVDAWk3fu+PLx5R2sHm +apY1ybvfQjvSHe2OMO1sxdwt2MkLBmfdhBsbYbDytPq4R1dDG2iDbqSNaDvYAExY +JUsate6PNxSWrRkY2lwmWrvI6+e/wctTBrY5PiKtTZMxpK1++/C3UUBiyg8NkGu5 +bHR2PHd5VDwB/Jm2/exC5iHPbTxtmjOwEyS+5wZhbkx6OoZhHCMN9hIvSitc8TNG +cpRGJIwYxwJZJVpim/TImsjAubh1uyMoY5fjW4GyBK9iU2plv/bS+lKyCMYgxHam +hzXwmgf/Q/ld9VKXKIXPWs8AeABfHYkMLeZ34laZ1Xhf1vPnktQctlukK8CzbYTU +Wm2BZ7kn/VEhwGOmrQ1nvnoCHTCyL+HHtIt8pKHM0rtKDKFAjMXZfZEK7DR2Qqll +/zogwy0m9Obvz/94XvdNMurUgdeTGyDwOouQcP+vd5x4LqsUtQEmwQfy4iLt7wl3 +RRLPUTLyCfqpD98UAPeqCJkIikd1Ojhr+fd3jjSoo1CDTah0auvlMSMifjggIvi9 +kE4nQISS0QqehGQ/ertNnLYWKvCgPI9fq8fQXG3mnFVR3qXhtSbIMbF1/AUye2bk +uVVZ3WTo2oPFEVv/ZyTH9NcP4XpeuA== +=KRyT -----END PGP PUBLIC KEY BLOCK----- diff --git a/t/lib-rebase.sh b/t/lib-rebase.sh index 2ca9fb69d6..7ea30e5006 100644 --- a/t/lib-rebase.sh +++ b/t/lib-rebase.sh @@ -47,9 +47,9 @@ set_fake_editor () { action=pick for line in $FAKE_LINES; do case $line in - pick|squash|fixup|edit|reword|drop) + pick|p|squash|s|fixup|f|edit|e|reword|r|drop|d) action="$line";; - exec*) + exec_*|x_*|break|b) echo "$line" | sed 's/_/ /g' >> "$1";; "#") echo '# comment' >> "$1";; diff --git a/t/oid-info/README b/t/oid-info/README new file mode 100644 index 0000000000..27f843fc00 --- /dev/null +++ b/t/oid-info/README @@ -0,0 +1,19 @@ +This directory contains various per-hash values that are used in the testsuite. + +Each file contains lines containing a key-value pair; blank lines and lines +starting with `#` are ignored. The key and value are separated by whitespace +(specifically, those whitespace in the default `$IFS`). The key consists only +of shell identifier characters, and the value consists of a hash algorithm, +colon, and value. The hash algorithm also consists only of shell identifier +characters; it should match the value in sha1-file.c. + +For example, the following lines map the key "rawsz" to "20" if SHA-1 is in use +and to "32" if SHA-256 is in use: + +---- +rawsz sha1:20 +rawsz sha256:32 +---- + +The keys and values used here are loaded by `test_oid_init` (see the README file +in the "t" directory) and are used by calling `test_oid`. diff --git a/t/oid-info/hash-info b/t/oid-info/hash-info new file mode 100644 index 0000000000..ccdbfdf974 --- /dev/null +++ b/t/oid-info/hash-info @@ -0,0 +1,8 @@ +rawsz sha1:20 +rawsz sha256:32 + +hexsz sha1:40 +hexsz sha256:64 + +zero sha1:0000000000000000000000000000000000000000 +zero sha256:0000000000000000000000000000000000000000000000000000000000000000 diff --git a/t/oid-info/oid b/t/oid-info/oid new file mode 100644 index 0000000000..a754970523 --- /dev/null +++ b/t/oid-info/oid @@ -0,0 +1,29 @@ +# These are some common invalid and partial object IDs used in tests. +001 sha1:0000000000000000000000000000000000000001 +001 sha256:0000000000000000000000000000000000000000000000000000000000000001 +002 sha1:0000000000000000000000000000000000000002 +002 sha256:0000000000000000000000000000000000000000000000000000000000000002 +003 sha1:0000000000000000000000000000000000000003 +003 sha256:0000000000000000000000000000000000000000000000000000000000000003 +004 sha1:0000000000000000000000000000000000000004 +004 sha256:0000000000000000000000000000000000000000000000000000000000000004 +005 sha1:0000000000000000000000000000000000000005 +005 sha256:0000000000000000000000000000000000000000000000000000000000000005 +006 sha1:0000000000000000000000000000000000000006 +006 sha256:0000000000000000000000000000000000000000000000000000000000000006 +007 sha1:0000000000000000000000000000000000000007 +007 sha256:0000000000000000000000000000000000000000000000000000000000000007 +# All zeros or Fs missing one or two hex segments. +zero_1 sha1:000000000000000000000000000000000000000 +zero_1 sha256:000000000000000000000000000000000000000000000000000000000000000 +zero_2 sha1:00000000000000000000000000000000000000 +zero_2 sha256:00000000000000000000000000000000000000000000000000000000000000 +ff_1 sha1:fffffffffffffffffffffffffffffffffffffff +ff_1 sha256:fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff +ff_2 sha1:ffffffffffffffffffffffffffffffffffffff +ff_2 sha256:ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff +# More various invalid OIDs. +numeric sha1:0123456789012345678901234567890123456789 +numeric sha256:0123456789012345678901234567890123456789012345678901234567890123 +deadbeef sha1:deadbeefdeadbeefdeadbeefdeadbeefdeadbeef +deadbeef sha256:deadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeefdeadbeef diff --git a/t/perf/p1450-fsck.sh b/t/perf/p1450-fsck.sh new file mode 100755 index 0000000000..ae1b84198b --- /dev/null +++ b/t/perf/p1450-fsck.sh @@ -0,0 +1,13 @@ +#!/bin/sh + +test_description='Test fsck performance' + +. ./perf-lib.sh + +test_perf_large_repo + +test_perf 'fsck' ' + git fsck +' + +test_done diff --git a/t/perf/p1451-fsck-skip-list.sh b/t/perf/p1451-fsck-skip-list.sh new file mode 100755 index 0000000000..c2b97d2487 --- /dev/null +++ b/t/perf/p1451-fsck-skip-list.sh @@ -0,0 +1,40 @@ +#!/bin/sh + +test_description='Test fsck skipList performance' + +. ./perf-lib.sh + +test_perf_fresh_repo + +n=1000000 + +test_expect_success "setup $n bad commits" ' + for i in $(test_seq 1 $n) + do + echo "commit refs/heads/master" && + echo "committer C <c@example.com> 1234567890 +0000" && + echo "data <<EOF" && + echo "$i.Q." && + echo "EOF" + done | q_to_nul | git fast-import +' + +skip=0 +while test $skip -le $n +do + test_expect_success "create skipList for $skip bad commits" ' + git log --format=%H --max-count=$skip | + sort >skiplist + ' + + test_perf "fsck with $skip skipped bad commits" ' + git -c fsck.skipList=skiplist fsck + ' + + case $skip in + 0) skip=1 ;; + *) skip=${skip}0 ;; + esac +done + +test_done diff --git a/t/perf/p3400-rebase.sh b/t/perf/p3400-rebase.sh index ce271ca4c1..d202aaed06 100755 --- a/t/perf/p3400-rebase.sh +++ b/t/perf/p3400-rebase.sh @@ -6,9 +6,9 @@ test_description='Tests rebase performance' test_perf_default_repo test_expect_success 'setup rebasing on top of a lot of changes' ' - git checkout -f -b base && - git checkout -b to-rebase && - git checkout -b upstream && + git checkout -f -B base && + git checkout -B to-rebase && + git checkout -B upstream && for i in $(seq 100) do # simulate huge diffs @@ -35,8 +35,8 @@ test_perf 'rebase on top of a lot of unrelated changes' ' test_expect_success 'setup rebasing many changes without split-index' ' git config core.splitIndex false && - git checkout -b upstream2 to-rebase && - git checkout -b to-rebase2 upstream + git checkout -B upstream2 to-rebase && + git checkout -B to-rebase2 upstream ' test_perf 'rebase a lot of unrelated changes without split-index' ' diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 850f651e4e..b6566003dd 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -87,6 +87,10 @@ _run_sub_test_lib_test_common () { passing metrics ' + # Tell the framework that we are self-testing to make sure + # it yields a stable result. + GIT_TEST_FRAMEWORK_SELFTEST=t && + # Point to the t/test-lib.sh, which isn't in ../ as usual . "\$TEST_DIRECTORY"/test-lib.sh EOF @@ -270,7 +274,7 @@ test_expect_success 'pretend we have a mix of all possible results' " EOF " -test_expect_success 'test --verbose' ' +test_expect_success C_LOCALE_OUTPUT 'test --verbose' ' test_must_fail run_sub_test_lib_test \ test-verbose "test verbose" --verbose <<-\EOF && test_expect_success "passing test" true @@ -821,9 +825,87 @@ test_expect_success 'tests clean up even on failures' " EOF " +test_expect_success 'test_oid setup' ' + test_oid_init +' + +test_expect_success 'test_oid provides sane info by default' ' + test_oid zero >actual && + grep "^00*\$" actual && + rawsz="$(test_oid rawsz)" && + hexsz="$(test_oid hexsz)" && + test "$hexsz" -eq $(wc -c <actual) && + test $(( $rawsz * 2)) -eq "$hexsz" +' + +test_expect_success 'test_oid can look up data for SHA-1' ' + test_when_finished "test_detect_hash" && + test_set_hash sha1 && + test_oid zero >actual && + grep "^00*\$" actual && + rawsz="$(test_oid rawsz)" && + hexsz="$(test_oid hexsz)" && + test $(wc -c <actual) -eq 40 && + test "$rawsz" -eq 20 && + test "$hexsz" -eq 40 +' + +test_expect_success 'test_oid can look up data for SHA-256' ' + test_when_finished "test_detect_hash" && + test_set_hash sha256 && + test_oid zero >actual && + grep "^00*\$" actual && + rawsz="$(test_oid rawsz)" && + hexsz="$(test_oid hexsz)" && + test $(wc -c <actual) -eq 64 && + test "$rawsz" -eq 32 && + test "$hexsz" -eq 64 +' + ################################################################ # Basics of the basics +test_oid_cache <<\EOF +path0f sha1:f87290f8eb2cbbea7857214459a0739927eab154 +path0f sha256:638106af7c38be056f3212cbd7ac65bc1bac74f420ca5a436ff006a9d025d17d + +path0s sha1:15a98433ae33114b085f3eb3bb03b832b3180a01 +path0s sha256:3a24cc53cf68edddac490bbf94a418a52932130541361f685df685e41dd6c363 + +path2f sha1:3feff949ed00a62d9f7af97c15cd8a30595e7ac7 +path2f sha256:2a7f36571c6fdbaf0e3f62751a0b25a3f4c54d2d1137b3f4af9cb794bb498e5f + +path2s sha1:d8ce161addc5173867a3c3c730924388daedbc38 +path2s sha256:18fd611b787c2e938ddcc248fabe4d66a150f9364763e9ec133dd01d5bb7c65a + +path2d sha1:58a09c23e2ca152193f2786e06986b7b6712bdbe +path2d sha256:00e4b32b96e7e3d65d79112dcbea53238a22715f896933a62b811377e2650c17 + +path3f sha1:0aa34cae68d0878578ad119c86ca2b5ed5b28376 +path3f sha256:09f58616b951bd571b8cb9dc76d372fbb09ab99db2393f5ab3189d26c45099ad + +path3s sha1:8599103969b43aff7e430efea79ca4636466794f +path3s sha256:fce1aed087c053306f3f74c32c1a838c662bbc4551a7ac2420f5d6eb061374d0 + +path3d sha1:21ae8269cacbe57ae09138dcc3a2887f904d02b3 +path3d sha256:9b60497be959cb830bf3f0dc82bcc9ad9e925a24e480837ade46b2295e47efe1 + +subp3f sha1:00fb5908cb97c2564a9783c0c64087333b3b464f +subp3f sha256:a1a9e16998c988453f18313d10375ee1d0ddefe757e710dcae0d66aa1e0c58b3 + +subp3s sha1:6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c +subp3s sha256:81759d9f5e93c6546ecfcadb560c1ff057314b09f93fe8ec06e2d8610d34ef10 + +subp3d sha1:3c5e5399f3a333eddecce7a9b9465b63f65f51e2 +subp3d sha256:76b4ef482d4fa1c754390344cf3851c7f883b27cf9bc999c6547928c46aeafb7 + +root sha1:087704a96baf1c2d1c869a8b084481e121c88b5b +root sha256:9481b52abab1b2ffeedbf9de63ce422b929f179c1b98ff7bee5f8f1bc0710751 + +simpletree sha1:7bb943559a305bdd6bdee2cef6e5df2413c3d30a +simpletree sha256:1710c07a6c86f9a3c7376364df04c47ee39e5a5e221fcdd84b743bc9bb7e2bc5 +EOF + # updating a new file without --add should fail. test_expect_success 'git update-index without --add should fail adding' ' test_must_fail git update-index should-be-empty @@ -839,8 +921,8 @@ test_expect_success 'writing tree out with git write-tree' ' ' # we know the shape and contents of the tree and know the object ID for it. -test_expect_success SHA1 'validate object ID of a known tree' ' - test "$tree" = 7bb943559a305bdd6bdee2cef6e5df2413c3d30a +test_expect_success 'validate object ID of a known tree' ' + test "$tree" = "$(test_oid simpletree)" ' # Removing paths. @@ -882,16 +964,16 @@ test_expect_success 'showing stage with git ls-files --stage' ' git ls-files --stage >current ' -test_expect_success SHA1 'validate git ls-files output for a known tree' ' - cat >expected <<-\EOF && - 100644 f87290f8eb2cbbea7857214459a0739927eab154 0 path0 - 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0 path0sym - 100644 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 0 path2/file2 - 120000 d8ce161addc5173867a3c3c730924388daedbc38 0 path2/file2sym - 100644 0aa34cae68d0878578ad119c86ca2b5ed5b28376 0 path3/file3 - 120000 8599103969b43aff7e430efea79ca4636466794f 0 path3/file3sym - 100644 00fb5908cb97c2564a9783c0c64087333b3b464f 0 path3/subp3/file3 - 120000 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c 0 path3/subp3/file3sym +test_expect_success 'validate git ls-files output for a known tree' ' + cat >expected <<-EOF && + 100644 $(test_oid path0f) 0 path0 + 120000 $(test_oid path0s) 0 path0sym + 100644 $(test_oid path2f) 0 path2/file2 + 120000 $(test_oid path2s) 0 path2/file2sym + 100644 $(test_oid path3f) 0 path3/file3 + 120000 $(test_oid path3s) 0 path3/file3sym + 100644 $(test_oid subp3f) 0 path3/subp3/file3 + 120000 $(test_oid subp3s) 0 path3/subp3/file3sym EOF test_cmp expected current ' @@ -900,20 +982,20 @@ test_expect_success 'writing tree out with git write-tree' ' tree=$(git write-tree) ' -test_expect_success SHA1 'validate object ID for a known tree' ' - test "$tree" = 087704a96baf1c2d1c869a8b084481e121c88b5b +test_expect_success 'validate object ID for a known tree' ' + test "$tree" = "$(test_oid root)" ' test_expect_success 'showing tree with git ls-tree' ' git ls-tree $tree >current ' -test_expect_success SHA1 'git ls-tree output for a known tree' ' - cat >expected <<-\EOF && - 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 - 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym - 040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe path2 - 040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3 path3 +test_expect_success 'git ls-tree output for a known tree' ' + cat >expected <<-EOF && + 100644 blob $(test_oid path0f) path0 + 120000 blob $(test_oid path0s) path0sym + 040000 tree $(test_oid path2d) path2 + 040000 tree $(test_oid path3d) path3 EOF test_cmp expected current ' @@ -924,16 +1006,16 @@ test_expect_success 'showing tree with git ls-tree -r' ' git ls-tree -r $tree >current ' -test_expect_success SHA1 'git ls-tree -r output for a known tree' ' - cat >expected <<-\EOF && - 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 - 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym - 100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 path2/file2 - 120000 blob d8ce161addc5173867a3c3c730924388daedbc38 path2/file2sym - 100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376 path3/file3 - 120000 blob 8599103969b43aff7e430efea79ca4636466794f path3/file3sym - 100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f path3/subp3/file3 - 120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c path3/subp3/file3sym +test_expect_success 'git ls-tree -r output for a known tree' ' + cat >expected <<-EOF && + 100644 blob $(test_oid path0f) path0 + 120000 blob $(test_oid path0s) path0sym + 100644 blob $(test_oid path2f) path2/file2 + 120000 blob $(test_oid path2s) path2/file2sym + 100644 blob $(test_oid path3f) path3/file3 + 120000 blob $(test_oid path3s) path3/file3sym + 100644 blob $(test_oid subp3f) path3/subp3/file3 + 120000 blob $(test_oid subp3s) path3/subp3/file3sym EOF test_cmp expected current ' @@ -943,19 +1025,19 @@ test_expect_success 'showing tree with git ls-tree -r -t' ' git ls-tree -r -t $tree >current ' -test_expect_success SHA1 'git ls-tree -r output for a known tree' ' - cat >expected <<-\EOF && - 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 - 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym - 040000 tree 58a09c23e2ca152193f2786e06986b7b6712bdbe path2 - 100644 blob 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 path2/file2 - 120000 blob d8ce161addc5173867a3c3c730924388daedbc38 path2/file2sym - 040000 tree 21ae8269cacbe57ae09138dcc3a2887f904d02b3 path3 - 100644 blob 0aa34cae68d0878578ad119c86ca2b5ed5b28376 path3/file3 - 120000 blob 8599103969b43aff7e430efea79ca4636466794f path3/file3sym - 040000 tree 3c5e5399f3a333eddecce7a9b9465b63f65f51e2 path3/subp3 - 100644 blob 00fb5908cb97c2564a9783c0c64087333b3b464f path3/subp3/file3 - 120000 blob 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c path3/subp3/file3sym +test_expect_success 'git ls-tree -r output for a known tree' ' + cat >expected <<-EOF && + 100644 blob $(test_oid path0f) path0 + 120000 blob $(test_oid path0s) path0sym + 040000 tree $(test_oid path2d) path2 + 100644 blob $(test_oid path2f) path2/file2 + 120000 blob $(test_oid path2s) path2/file2sym + 040000 tree $(test_oid path3d) path3 + 100644 blob $(test_oid path3f) path3/file3 + 120000 blob $(test_oid path3s) path3/file3sym + 040000 tree $(test_oid subp3d) path3/subp3 + 100644 blob $(test_oid subp3f) path3/subp3/file3 + 120000 blob $(test_oid subp3s) path3/subp3/file3sym EOF test_cmp expected current ' @@ -964,26 +1046,27 @@ test_expect_success 'writing partial tree out with git write-tree --prefix' ' ptree=$(git write-tree --prefix=path3) ' -test_expect_success SHA1 'validate object ID for a known tree' ' - test "$ptree" = 21ae8269cacbe57ae09138dcc3a2887f904d02b3 +test_expect_success 'validate object ID for a known tree' ' + test "$ptree" = $(test_oid path3d) ' test_expect_success 'writing partial tree out with git write-tree --prefix' ' ptree=$(git write-tree --prefix=path3/subp3) ' -test_expect_success SHA1 'validate object ID for a known tree' ' - test "$ptree" = 3c5e5399f3a333eddecce7a9b9465b63f65f51e2 +test_expect_success 'validate object ID for a known tree' ' + test "$ptree" = $(test_oid subp3d) ' test_expect_success 'put invalid objects into the index' ' rm -f .git/index && - cat >badobjects <<-\EOF && - 100644 blob 1000000000000000000000000000000000000000 dir/file1 - 100644 blob 2000000000000000000000000000000000000000 dir/file2 - 100644 blob 3000000000000000000000000000000000000000 dir/file3 - 100644 blob 4000000000000000000000000000000000000000 dir/file4 - 100644 blob 5000000000000000000000000000000000000000 dir/file5 + suffix=$(echo $ZERO_OID | sed -e "s/^.//") && + cat >badobjects <<-EOF && + 100644 blob $(test_oid 001) dir/file1 + 100644 blob $(test_oid 002) dir/file2 + 100644 blob $(test_oid 003) dir/file3 + 100644 blob $(test_oid 004) dir/file4 + 100644 blob $(test_oid 005) dir/file5 EOF git update-index --index-info <badobjects ' @@ -1006,19 +1089,19 @@ test_expect_success 'git read-tree followed by write-tree should be idempotent' test "$newtree" = "$tree" ' -test_expect_success SHA1 'validate git diff-files output for a know cache/work tree state' ' - cat >expected <<\EOF && -:100644 100644 f87290f8eb2cbbea7857214459a0739927eab154 0000000000000000000000000000000000000000 M path0 -:120000 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0000000000000000000000000000000000000000 M path0sym -:100644 100644 3feff949ed00a62d9f7af97c15cd8a30595e7ac7 0000000000000000000000000000000000000000 M path2/file2 -:120000 120000 d8ce161addc5173867a3c3c730924388daedbc38 0000000000000000000000000000000000000000 M path2/file2sym -:100644 100644 0aa34cae68d0878578ad119c86ca2b5ed5b28376 0000000000000000000000000000000000000000 M path3/file3 -:120000 120000 8599103969b43aff7e430efea79ca4636466794f 0000000000000000000000000000000000000000 M path3/file3sym -:100644 100644 00fb5908cb97c2564a9783c0c64087333b3b464f 0000000000000000000000000000000000000000 M path3/subp3/file3 -:120000 120000 6649a1ebe9e9f1c553b66f5a6e74136a07ccc57c 0000000000000000000000000000000000000000 M path3/subp3/file3sym +test_expect_success 'validate git diff-files output for a know cache/work tree state' ' + cat >expected <<EOF && +:100644 100644 $(test_oid path0f) $ZERO_OID M path0 +:120000 120000 $(test_oid path0s) $ZERO_OID M path0sym +:100644 100644 $(test_oid path2f) $ZERO_OID M path2/file2 +:120000 120000 $(test_oid path2s) $ZERO_OID M path2/file2sym +:100644 100644 $(test_oid path3f) $ZERO_OID M path3/file3 +:120000 120000 $(test_oid path3s) $ZERO_OID M path3/file3sym +:100644 100644 $(test_oid subp3f) $ZERO_OID M path3/subp3/file3 +:120000 120000 $(test_oid subp3s) $ZERO_OID M path3/subp3/file3sym EOF git diff-files >current && - test_cmp current expected + test_cmp expected current ' test_expect_success 'git update-index --refresh should succeed' ' @@ -1031,23 +1114,23 @@ test_expect_success 'no diff after checkout and git update-index --refresh' ' ' ################################################################ -P=087704a96baf1c2d1c869a8b084481e121c88b5b +P=$(test_oid root) -test_expect_success SHA1 'git commit-tree records the correct tree in a commit' ' +test_expect_success 'git commit-tree records the correct tree in a commit' ' commit0=$(echo NO | git commit-tree $P) && tree=$(git show --pretty=raw $commit0 | sed -n -e "s/^tree //p" -e "/^author /q") && test "z$tree" = "z$P" ' -test_expect_success SHA1 'git commit-tree records the correct parent in a commit' ' +test_expect_success 'git commit-tree records the correct parent in a commit' ' commit1=$(echo NO | git commit-tree $P -p $commit0) && parent=$(git show --pretty=raw $commit1 | sed -n -e "s/^parent //p" -e "/^author /q") && test "z$commit0" = "z$parent" ' -test_expect_success SHA1 'git commit-tree omits duplicated parent in a commit' ' +test_expect_success 'git commit-tree omits duplicated parent in a commit' ' commit2=$(echo NO | git commit-tree $P -p $commit0 -p $commit0) && parent=$(git show --pretty=raw $commit2 | sed -n -e "s/^parent //p" -e "/^author /q" | diff --git a/t/t0002-gitfile.sh b/t/t0002-gitfile.sh index 3691023d51..0aa9908ea1 100755 --- a/t/t0002-gitfile.sh +++ b/t/t0002-gitfile.sh @@ -92,11 +92,12 @@ test_expect_success 'enter_repo non-strict mode' ' mv .git .realgit && echo "gitdir: .realgit" >.git ) && + head=$(git -C enter_repo rev-parse HEAD) && git ls-remote enter_repo >actual && - cat >expected <<-\EOF && - 946e985ab20de757ca5b872b16d64e92ff3803a9 HEAD - 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/heads/master - 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/tags/foo + cat >expected <<-EOF && + $head HEAD + $head refs/heads/master + $head refs/tags/foo EOF test_cmp expected actual ' @@ -106,21 +107,23 @@ test_expect_success 'enter_repo linked checkout' ' cd enter_repo && git worktree add ../foo refs/tags/foo ) && + head=$(git -C enter_repo rev-parse HEAD) && git ls-remote foo >actual && - cat >expected <<-\EOF && - 946e985ab20de757ca5b872b16d64e92ff3803a9 HEAD - 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/heads/master - 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/tags/foo + cat >expected <<-EOF && + $head HEAD + $head refs/heads/master + $head refs/tags/foo EOF test_cmp expected actual ' test_expect_success 'enter_repo strict mode' ' + head=$(git -C enter_repo rev-parse HEAD) && git ls-remote --upload-pack="git upload-pack --strict" foo/.git >actual && - cat >expected <<-\EOF && - 946e985ab20de757ca5b872b16d64e92ff3803a9 HEAD - 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/heads/master - 946e985ab20de757ca5b872b16d64e92ff3803a9 refs/tags/foo + cat >expected <<-EOF && + $head HEAD + $head refs/heads/master + $head refs/tags/foo EOF test_cmp expected actual ' diff --git a/t/t0006-date.sh b/t/t0006-date.sh index 64ff86df8e..ffb2975e48 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -113,6 +113,8 @@ check_approxidate '3:00' '2009-08-30 03:00:00' check_approxidate '15:00' '2009-08-30 15:00:00' check_approxidate 'noon today' '2009-08-30 12:00:00' check_approxidate 'noon yesterday' '2009-08-29 12:00:00' +check_approxidate 'January 5th noon pm' '2009-01-05 12:00:00' +check_approxidate '10am noon' '2009-08-29 12:00:00' check_approxidate 'last tuesday' '2009-08-25 19:20:00' check_approxidate 'July 5th' '2009-07-05 19:20:00' diff --git a/t/t0009-prio-queue.sh b/t/t0009-prio-queue.sh index e56dfce668..3941ad2528 100755 --- a/t/t0009-prio-queue.sh +++ b/t/t0009-prio-queue.sh @@ -47,4 +47,18 @@ test_expect_success 'notice empty queue' ' test_cmp expect actual ' +cat >expect <<'EOF' +3 +2 +6 +4 +5 +1 +8 +EOF +test_expect_success 'stack order' ' + test-tool prio-queue stack 8 1 5 4 6 2 3 dump >actual && + test_cmp expect actual +' + test_done diff --git a/t/t0012-help.sh b/t/t0012-help.sh index bc27df7f38..e8ef7300ec 100755 --- a/t/t0012-help.sh +++ b/t/t0012-help.sh @@ -29,9 +29,9 @@ test_expect_success "setup" ' # to verify test_expect_success 'basic help commands' ' git help >/dev/null && - git help -a >/dev/null && + git help -a --no-verbose >/dev/null && git help -g >/dev/null && - git help -av >/dev/null + git help -a >/dev/null ' test_expect_success "works for commands and guides by default" ' diff --git a/t/t0014-alias.sh b/t/t0014-alias.sh new file mode 100755 index 0000000000..a070e645d7 --- /dev/null +++ b/t/t0014-alias.sh @@ -0,0 +1,40 @@ +#!/bin/sh + +test_description='git command aliasing' + +. ./test-lib.sh + +test_expect_success 'nested aliases - internal execution' ' + git config alias.nested-internal-1 nested-internal-2 && + git config alias.nested-internal-2 status && + git nested-internal-1 >output && + test_i18ngrep "^On branch " output +' + +test_expect_success 'nested aliases - mixed execution' ' + git config alias.nested-external-1 nested-external-2 && + git config alias.nested-external-2 "!git nested-external-3" && + git config alias.nested-external-3 status && + git nested-external-1 >output && + test_i18ngrep "^On branch " output +' + +test_expect_success 'looping aliases - internal execution' ' + git config alias.loop-internal-1 loop-internal-2 && + git config alias.loop-internal-2 loop-internal-3 && + git config alias.loop-internal-3 loop-internal-2 && + test_must_fail git loop-internal-1 2>output && + test_i18ngrep "^fatal: alias loop detected: expansion of" output +' + +# This test is disabled until external loops are fixed, because would block +# the test suite for a full minute. +# +#test_expect_failure 'looping aliases - mixed execution' ' +# git config alias.loop-mixed-1 loop-mixed-2 && +# git config alias.loop-mixed-2 "!git loop-mixed-1" && +# test_must_fail git loop-mixed-1 2>output && +# test_i18ngrep "^fatal: alias loop detected: expansion of" output +#' + +test_done diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index 308cd28f3b..fd5f1ac649 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -166,10 +166,10 @@ test_expect_success expanded_in_repo ' rm -f expanded-keywords expanded-keywords-crlf && git checkout -- expanded-keywords && - test_cmp expanded-keywords expected-output && + test_cmp expected-output expanded-keywords && git checkout -- expanded-keywords-crlf && - test_cmp expanded-keywords-crlf expected-output-crlf + test_cmp expected-output-crlf expanded-keywords-crlf ' # The use of %f in a filter definition is expanded to the path to diff --git a/t/t0029-core-unsetenvvars.sh b/t/t0029-core-unsetenvvars.sh new file mode 100755 index 0000000000..24ce46a6ea --- /dev/null +++ b/t/t0029-core-unsetenvvars.sh @@ -0,0 +1,30 @@ +#!/bin/sh + +test_description='test the Windows-only core.unsetenvvars setting' + +. ./test-lib.sh + +if ! test_have_prereq MINGW +then + skip_all='skipping Windows-specific tests' + test_done +fi + +test_expect_success 'setup' ' + mkdir -p "$TRASH_DIRECTORY/.git/hooks" && + write_script "$TRASH_DIRECTORY/.git/hooks/pre-commit" <<-\EOF + echo $HOBBES >&2 + EOF +' + +test_expect_success 'core.unsetenvvars works' ' + HOBBES=Calvin && + export HOBBES && + git commit --allow-empty -m with 2>err && + grep Calvin err && + git -c core.unsetenvvars=FINDUS,HOBBES,CALVIN \ + commit --allow-empty -m without 2>err && + ! grep Calvin err +' + +test_done diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index 5b0560fa20..f5b10861c4 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -8,7 +8,7 @@ test_description='our own option parser' . ./test-lib.sh cat >expect <<\EOF -usage: test-parse-options <options> +usage: test-tool parse-options <options> A helper function for the parse-options API. @@ -23,7 +23,6 @@ usage: test-parse-options <options> -j <n> get a integer, too -m, --magnitude <n> get a magnitude --set23 set integer to 23 - -t <time> get timestamp of <time> -L, --length <str> get length of <str> -F, --file <file> set file to <file> @@ -52,7 +51,7 @@ Standard options EOF test_expect_success 'test help' ' - test_must_fail test-parse-options -h >output 2>output.err && + test_must_fail test-tool parse-options -h >output 2>output.err && test_must_be_empty output.err && test_i18ncmp expect output ' @@ -64,7 +63,7 @@ check () { shift && expect="$1" && shift && - test-parse-options --expect="$what $expect" "$@" + test-tool parse-options --expect="$what $expect" "$@" } check_unknown_i18n() { @@ -75,7 +74,7 @@ check_unknown_i18n() { echo error: unknown switch \`${1#-}\' >expect ;; esac && cat expect.err >>expect && - test_must_fail test-parse-options $* >output 2>output.err && + test_must_fail test-tool parse-options $* >output 2>output.err && test_must_be_empty output && test_i18ncmp expect output.err } @@ -133,7 +132,7 @@ file: prefix/my.file EOF test_expect_success 'short options' ' - test-parse-options -s123 -b -i 1729 -m 16k -b -vv -n -F my.file \ + test-tool parse-options -s123 -b -i 1729 -m 16k -b -vv -n -F my.file \ >output 2>output.err && test_cmp expect output && test_must_be_empty output.err @@ -153,7 +152,7 @@ file: prefix/fi.le EOF test_expect_success 'long options' ' - test-parse-options --boolean --integer 1729 --magnitude 16k \ + test-tool parse-options --boolean --integer 1729 --magnitude 16k \ --boolean --string2=321 --verbose --verbose --no-dry-run \ --abbrev=10 --file fi.le --obsolete \ >output 2>output.err && @@ -162,9 +161,9 @@ test_expect_success 'long options' ' ' test_expect_success 'missing required value' ' - test_expect_code 129 test-parse-options -s && - test_expect_code 129 test-parse-options --string && - test_expect_code 129 test-parse-options --file + test_expect_code 129 test-tool parse-options -s && + test_expect_code 129 test-tool parse-options --string && + test_expect_code 129 test-tool parse-options --file ' cat >expect <<\EOF @@ -184,7 +183,7 @@ arg 02: --boolean EOF test_expect_success 'intermingled arguments' ' - test-parse-options a1 --string 123 b1 --boolean -j 13 -- --boolean \ + test-tool parse-options a1 --string 123 b1 --boolean -j 13 -- --boolean \ >output 2>output.err && test_must_be_empty output.err && test_cmp expect output @@ -204,21 +203,21 @@ file: (not set) EOF test_expect_success 'unambiguously abbreviated option' ' - test-parse-options --int 2 --boolean --no-bo >output 2>output.err && + test-tool parse-options --int 2 --boolean --no-bo >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' test_expect_success 'unambiguously abbreviated option with "="' ' - test-parse-options --expect="integer: 2" --int=2 + test-tool parse-options --expect="integer: 2" --int=2 ' test_expect_success 'ambiguously abbreviated option' ' - test_expect_code 129 test-parse-options --strin 123 + test_expect_code 129 test-tool parse-options --strin 123 ' test_expect_success 'non ambiguous option (after two options it abbreviates)' ' - test-parse-options --expect="string: 123" --st 123 + test-tool parse-options --expect="string: 123" --st 123 ' cat >typo.err <<\EOF @@ -226,7 +225,7 @@ error: did you mean `--boolean` (with two dashes ?) EOF test_expect_success 'detect possible typos' ' - test_must_fail test-parse-options -boolean >output 2>output.err && + test_must_fail test-tool parse-options -boolean >output 2>output.err && test_must_be_empty output && test_cmp typo.err output.err ' @@ -236,34 +235,13 @@ error: did you mean `--ambiguous` (with two dashes ?) EOF test_expect_success 'detect possible typos' ' - test_must_fail test-parse-options -ambiguous >output 2>output.err && + test_must_fail test-tool parse-options -ambiguous >output 2>output.err && test_must_be_empty output && test_cmp typo.err output.err ' test_expect_success 'keep some options as arguments' ' - test-parse-options --expect="arg 00: --quux" --quux -' - -cat >expect <<\EOF -boolean: 0 -integer: 0 -magnitude: 0 -timestamp: 1 -string: (not set) -abbrev: 7 -verbose: -1 -quiet: 1 -dry run: no -file: (not set) -arg 00: foo -EOF - -test_expect_success 'OPT_DATE() works' ' - test-parse-options -t "1970-01-01 00:00:01 +0000" \ - foo -q >output 2>output.err && - test_must_be_empty output.err && - test_cmp expect output + test-tool parse-options --expect="arg 00: --quux" --quux ' cat >expect <<\EOF @@ -281,13 +259,13 @@ file: (not set) EOF test_expect_success 'OPT_CALLBACK() and OPT_BIT() work' ' - test-parse-options --length=four -b -4 >output 2>output.err && + test-tool parse-options --length=four -b -4 >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' test_expect_success 'OPT_CALLBACK() and callback errors work' ' - test_must_fail test-parse-options --no-length >output 2>output.err && + test_must_fail test-tool parse-options --no-length >output 2>output.err && test_must_be_empty output && test_must_be_empty output.err ' @@ -306,31 +284,31 @@ file: (not set) EOF test_expect_success 'OPT_BIT() and OPT_SET_INT() work' ' - test-parse-options --set23 -bbbbb --no-or4 >output 2>output.err && + test-tool parse-options --set23 -bbbbb --no-or4 >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' test_expect_success 'OPT_NEGBIT() and OPT_SET_INT() work' ' - test-parse-options --set23 -bbbbb --neg-or4 >output 2>output.err && + test-tool parse-options --set23 -bbbbb --neg-or4 >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' test_expect_success 'OPT_BIT() works' ' - test-parse-options --expect="boolean: 6" -bb --or4 + test-tool parse-options --expect="boolean: 6" -bb --or4 ' test_expect_success 'OPT_NEGBIT() works' ' - test-parse-options --expect="boolean: 6" -bb --no-neg-or4 + test-tool parse-options --expect="boolean: 6" -bb --no-neg-or4 ' test_expect_success 'OPT_COUNTUP() with PARSE_OPT_NODASH works' ' - test-parse-options --expect="boolean: 6" + + + + + + + test-tool parse-options --expect="boolean: 6" + + + + + + ' test_expect_success 'OPT_NUMBER_CALLBACK() works' ' - test-parse-options --expect="integer: 12345" -12345 + test-tool parse-options --expect="integer: 12345" -12345 ' cat >expect <<\EOF @@ -347,7 +325,7 @@ file: (not set) EOF test_expect_success 'negation of OPT_NONEG flags is not ambiguous' ' - test-parse-options --no-ambig >output 2>output.err && + test-tool parse-options --no-ambig >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' @@ -358,38 +336,38 @@ list: bar list: baz EOF test_expect_success '--list keeps list of strings' ' - test-parse-options --list foo --list=bar --list=baz >output && + test-tool parse-options --list foo --list=bar --list=baz >output && test_cmp expect output ' test_expect_success '--no-list resets list' ' - test-parse-options --list=other --list=irrelevant --list=options \ + test-tool parse-options --list=other --list=irrelevant --list=options \ --no-list --list=foo --list=bar --list=baz >output && test_cmp expect output ' test_expect_success 'multiple quiet levels' ' - test-parse-options --expect="quiet: 3" -q -q -q + test-tool parse-options --expect="quiet: 3" -q -q -q ' test_expect_success 'multiple verbose levels' ' - test-parse-options --expect="verbose: 3" -v -v -v + test-tool parse-options --expect="verbose: 3" -v -v -v ' test_expect_success '--no-quiet sets --quiet to 0' ' - test-parse-options --expect="quiet: 0" --no-quiet + test-tool parse-options --expect="quiet: 0" --no-quiet ' test_expect_success '--no-quiet resets multiple -q to 0' ' - test-parse-options --expect="quiet: 0" -q -q -q --no-quiet + test-tool parse-options --expect="quiet: 0" -q -q -q --no-quiet ' test_expect_success '--no-verbose sets verbose to 0' ' - test-parse-options --expect="verbose: 0" --no-verbose + test-tool parse-options --expect="verbose: 0" --no-verbose ' test_expect_success '--no-verbose resets multiple verbose to 0' ' - test-parse-options --expect="verbose: 0" -v -v -v --no-verbose + test-tool parse-options --expect="verbose: 0" -v -v -v --no-verbose ' test_done diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index 3e131c5325..cf932c8514 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -12,10 +12,14 @@ cat >hello-script <<-EOF cat hello-script EOF -test_expect_success 'start_command reports ENOENT' ' +test_expect_success 'start_command reports ENOENT (slash)' ' test-tool run-command start-command-ENOENT ./does-not-exist ' +test_expect_success 'start_command reports ENOENT (no slash)' ' + test-tool run-command start-command-ENOENT does-not-exist +' + test_expect_success 'run_command can run a command' ' cat hello-script >hello.sh && chmod +x hello.sh && @@ -25,6 +29,13 @@ test_expect_success 'run_command can run a command' ' test_must_be_empty err ' +test_expect_success 'run_command is restricted to PATH' ' + write_script should-not-run <<-\EOF && + echo yikes + EOF + test_must_fail test-tool run-command run-command should-not-run +' + test_expect_success !MINGW 'run_command can run a script without a #! line' ' cat >hello <<-\EOF && cat hello-script diff --git a/t/t0064-sha1-array.sh b/t/t0064-sha1-array.sh index 67484502a0..5dda570b9a 100755 --- a/t/t0064-sha1-array.sh +++ b/t/t0064-sha1-array.sh @@ -3,30 +3,30 @@ test_description='basic tests for the SHA1 array implementation' . ./test-lib.sh -echo20 () { +echoid () { prefix="${1:+$1 }" shift while test $# -gt 0 do - echo "$prefix$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1$1" + echo "$prefix$ZERO_OID" | sed -e "s/00/$1/g" shift done } test_expect_success 'ordered enumeration' ' - echo20 "" 44 55 88 aa >expect && + echoid "" 44 55 88 aa >expect && { - echo20 append 88 44 aa 55 && + echoid append 88 44 aa 55 && echo for_each_unique } | test-tool sha1-array >actual && test_cmp expect actual ' test_expect_success 'ordered enumeration with duplicate suppression' ' - echo20 "" 44 55 88 aa >expect && + echoid "" 44 55 88 aa >expect && { - echo20 append 88 44 aa 55 && - echo20 append 88 44 aa 55 && + echoid append 88 44 aa 55 && + echoid append 88 44 aa 55 && echo for_each_unique } | test-tool sha1-array >actual && test_cmp expect actual @@ -34,8 +34,8 @@ test_expect_success 'ordered enumeration with duplicate suppression' ' test_expect_success 'lookup' ' { - echo20 append 88 44 aa 55 && - echo20 lookup 55 + echoid append 88 44 aa 55 && + echoid lookup 55 } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -eq 1 @@ -43,8 +43,8 @@ test_expect_success 'lookup' ' test_expect_success 'lookup non-existing entry' ' { - echo20 append 88 44 aa 55 && - echo20 lookup 33 + echoid append 88 44 aa 55 && + echoid lookup 33 } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -lt 0 @@ -52,9 +52,9 @@ test_expect_success 'lookup non-existing entry' ' test_expect_success 'lookup with duplicates' ' { - echo20 append 88 44 aa 55 && - echo20 append 88 44 aa 55 && - echo20 lookup 55 + echoid append 88 44 aa 55 && + echoid append 88 44 aa 55 && + echoid lookup 55 } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -ge 2 && @@ -63,19 +63,24 @@ test_expect_success 'lookup with duplicates' ' test_expect_success 'lookup non-existing entry with duplicates' ' { - echo20 append 88 44 aa 55 && - echo20 append 88 44 aa 55 && - echo20 lookup 66 + echoid append 88 44 aa 55 && + echoid append 88 44 aa 55 && + echoid lookup 66 } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -lt 0 ' test_expect_success 'lookup with almost duplicate values' ' + # n-1 5s + root=$(echoid "" 55) && + root=${root%5} && { - echo "append 5555555555555555555555555555555555555555" && - echo "append 555555555555555555555555555555555555555f" && - echo20 lookup 55 + id1="${root}5" && + id2="${root}f" && + echo "append $id1" && + echo "append $id2" && + echoid lookup 55 } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -eq 0 @@ -83,8 +88,8 @@ test_expect_success 'lookup with almost duplicate values' ' test_expect_success 'lookup with single duplicate value' ' { - echo20 append 55 55 && - echo20 lookup 55 + echoid append 55 55 && + echoid lookup 55 } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -ge 0 && diff --git a/t/t0205-gettext-poison.sh b/t/t0205-gettext-poison.sh index 438e778d6a..a06269f38a 100755 --- a/t/t0205-gettext-poison.sh +++ b/t/t0205-gettext-poison.sh @@ -5,13 +5,15 @@ test_description='Gettext Shell poison' +GIT_TEST_GETTEXT_POISON=YesPlease +export GIT_TEST_GETTEXT_POISON . ./lib-gettext.sh -test_expect_success GETTEXT_POISON 'sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME" is poison' ' +test_expect_success 'sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME" is poison' ' test "$GIT_INTERNAL_GETTEXT_SH_SCHEME" = "poison" ' -test_expect_success GETTEXT_POISON 'gettext: our gettext() fallback has poison semantics' ' +test_expect_success 'gettext: our gettext() fallback has poison semantics' ' printf "# GETTEXT POISON #" >expect && gettext "test" >actual && test_cmp expect actual && @@ -20,7 +22,7 @@ test_expect_success GETTEXT_POISON 'gettext: our gettext() fallback has poison s test_cmp expect actual ' -test_expect_success GETTEXT_POISON 'eval_gettext: our eval_gettext() fallback has poison semantics' ' +test_expect_success 'eval_gettext: our eval_gettext() fallback has poison semantics' ' printf "# GETTEXT POISON #" >expect && eval_gettext "test" >actual && test_cmp expect actual && diff --git a/t/t0410-partial-clone.sh b/t/t0410-partial-clone.sh index cfd0655ea1..ba3887f178 100755 --- a/t/t0410-partial-clone.sh +++ b/t/t0410-partial-clone.sh @@ -182,6 +182,47 @@ test_expect_success 'fetching of missing objects works with ref-in-want enabled' grep "git< fetch=.*ref-in-want" trace ' +test_expect_success 'fetching of missing blobs works' ' + rm -rf server repo && + test_create_repo server && + test_commit -C server foo && + git -C server repack -a -d --write-bitmap-index && + + git clone "file://$(pwd)/server" repo && + git hash-object repo/foo.t >blobhash && + rm -rf repo/.git/objects/* && + + git -C server config uploadpack.allowanysha1inwant 1 && + git -C server config uploadpack.allowfilter 1 && + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "origin" && + + git -C repo cat-file -p $(cat blobhash) +' + +test_expect_success 'fetching of missing trees does not fetch blobs' ' + rm -rf server repo && + test_create_repo server && + test_commit -C server foo && + git -C server repack -a -d --write-bitmap-index && + + git clone "file://$(pwd)/server" repo && + git -C repo rev-parse foo^{tree} >treehash && + git hash-object repo/foo.t >blobhash && + rm -rf repo/.git/objects/* && + + git -C server config uploadpack.allowanysha1inwant 1 && + git -C server config uploadpack.allowfilter 1 && + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "origin" && + git -C repo cat-file -p $(cat treehash) && + + # Ensure that the tree, but not the blob, is fetched + git -C repo rev-list --objects --missing=print $(cat treehash) >objects && + grep "^$(cat treehash)" objects && + grep "^[?]$(cat blobhash)" objects +' + test_expect_success 'rev-list stops traversal at missing and promised commit' ' rm -rf repo && test_create_repo repo && @@ -198,6 +239,51 @@ test_expect_success 'rev-list stops traversal at missing and promised commit' ' ! grep $FOO out ' +test_expect_success 'missing tree objects with --missing=allow-promisor and --exclude-promisor-objects' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + test_commit -C repo baz && + + promise_and_delete $(git -C repo rev-parse bar^{tree}) && + promise_and_delete $(git -C repo rev-parse foo^{tree}) && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + + git -C repo rev-list --missing=allow-promisor --objects HEAD >objs 2>rev_list_err && + test_must_be_empty rev_list_err && + # 3 commits, 3 blobs, and 1 tree + test_line_count = 7 objs && + + # Do the same for --exclude-promisor-objects, but with all trees gone. + promise_and_delete $(git -C repo rev-parse baz^{tree}) && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >objs 2>rev_list_err && + test_must_be_empty rev_list_err && + # 3 commits, no blobs or trees + test_line_count = 3 objs +' + +test_expect_success 'missing non-root tree object and rev-list' ' + rm -rf repo && + test_create_repo repo && + mkdir repo/dir && + echo foo >repo/dir/foo && + git -C repo add dir/foo && + git -C repo commit -m "commit dir/foo" && + + promise_and_delete $(git -C repo rev-parse HEAD:dir) && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + + git -C repo rev-list --missing=allow-any --objects HEAD >objs 2>rev_list_err && + test_must_be_empty rev_list_err && + # 1 commit and 1 tree + test_line_count = 2 objs +' + test_expect_success 'rev-list stops traversal at missing and promised tree' ' rm -rf repo && test_create_repo repo && diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index 7f19d591f2..43c4be1e5e 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -140,15 +140,17 @@ test_expect_success '--batch-check without %(rest) considers whole line' ' test_cmp expect actual ' +test_oid_init + tree_sha1=$(git write-tree) -tree_size=33 +tree_size=$(($(test_oid rawsz) + 13)) tree_pretty_content="100644 blob $hello_sha1 hello" run_tests 'tree' $tree_sha1 $tree_size "" "$tree_pretty_content" commit_message="Initial commit" commit_sha1=$(echo_without_newline "$commit_message" | git commit-tree $tree_sha1) -commit_size=177 +commit_size=$(($(test_oid hexsz) + 137)) commit_content="tree $tree_sha1 author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> 0000000000 +0000 committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 0000000000 +0000 @@ -218,8 +220,8 @@ test_expect_success "--batch-check for a non-existent hash" ' test "0000000000000000000000000000000000000042 missing 0000000000000000000000000000000000000084 missing" = \ "$( ( echo 0000000000000000000000000000000000000042; - echo_without_newline 0000000000000000000000000000000000000084; ) \ - | git cat-file --batch-check)" + echo_without_newline 0000000000000000000000000000000000000084; ) | + git cat-file --batch-check)" ' test_expect_success "--batch for an existent and a non-existent hash" ' @@ -227,8 +229,8 @@ test_expect_success "--batch for an existent and a non-existent hash" ' $tag_content 0000000000000000000000000000000000000000 missing" = \ "$( ( echo $tag_sha1; - echo_without_newline 0000000000000000000000000000000000000000; ) \ - | git cat-file --batch)" + echo_without_newline 0000000000000000000000000000000000000000; ) | + git cat-file --batch)" ' test_expect_success "--batch-check for an empty line" ' diff --git a/t/t1060-object-corruption.sh b/t/t1060-object-corruption.sh index ac1f189fd2..4feb65157d 100755 --- a/t/t1060-object-corruption.sh +++ b/t/t1060-object-corruption.sh @@ -117,8 +117,10 @@ test_expect_failure 'clone --local detects misnamed objects' ' ' test_expect_success 'fetch into corrupted repo with index-pack' ' + cp -R bit-error bit-error-cp && + test_when_finished "rm -rf bit-error-cp" && ( - cd bit-error && + cd bit-error-cp && test_must_fail git -c transfer.unpackLimit=1 \ fetch ../no-bit-error 2>stderr && test_i18ngrep ! -i collision stderr diff --git a/t/t1090-sparse-checkout-scope.sh b/t/t1090-sparse-checkout-scope.sh index 25d7c700f6..090b7fc3d3 100755 --- a/t/t1090-sparse-checkout-scope.sh +++ b/t/t1090-sparse-checkout-scope.sh @@ -63,4 +63,37 @@ test_expect_success 'return to full checkout of master' ' test "$(cat b)" = "modified" ' +test_expect_success 'in partial clone, sparse checkout only fetches needed blobs' ' + test_create_repo server && + git clone "file://$(pwd)/server" client && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + echo a >server/a && + echo bb >server/b && + mkdir server/c && + echo ccc >server/c/c && + git -C server add a b c/c && + git -C server commit -m message && + + test_config -C client core.sparsecheckout 1 && + test_config -C client extensions.partialclone origin && + echo "!/*" >client/.git/info/sparse-checkout && + echo "/a" >>client/.git/info/sparse-checkout && + git -C client fetch --filter=blob:none origin && + git -C client checkout FETCH_HEAD && + + git -C client rev-list HEAD \ + --quiet --objects --missing=print >unsorted_actual && + ( + printf "?" && + git hash-object server/b && + printf "?" && + git hash-object server/c/c + ) >unsorted_expect && + sort unsorted_actual >actual && + sort unsorted_expect >expect && + test_cmp expect actual +' + test_done diff --git a/t/t1300-config.sh b/t/t1300-config.sh index cdf1fed5d1..9652b241c7 100755 --- a/t/t1300-config.sh +++ b/t/t1300-config.sh @@ -76,15 +76,11 @@ EOF test_expect_success 'non-match result' 'test_cmp expect .git/config' test_expect_success 'find mixed-case key by canonical name' ' - echo Second >expect && - git config cores.whatever >actual && - test_cmp expect actual + test_cmp_config Second cores.whatever ' test_expect_success 'find mixed-case key by non-canonical name' ' - echo Second >expect && - git config CoReS.WhAtEvEr >actual && - test_cmp expect actual + test_cmp_config Second CoReS.WhAtEvEr ' test_expect_success 'subsections are not canonicalized by git-config' ' @@ -94,12 +90,8 @@ test_expect_success 'subsections are not canonicalized by git-config' ' [section "SubSection"] key = two EOF - echo one >expect && - git config section.subsection.key >actual && - test_cmp expect actual && - echo two >expect && - git config section.SubSection.key >actual && - test_cmp expect actual + test_cmp_config one section.subsection.key && + test_cmp_config two section.SubSection.key ' cat > .git/config <<\EOF @@ -212,9 +204,7 @@ test_expect_success 'really really mean test' ' ' test_expect_success 'get value' ' - echo alpha >expect && - git config beta.haha >actual && - test_cmp expect actual + test_cmp_config alpha beta.haha ' cat > expect << EOF @@ -251,15 +241,11 @@ test_expect_success 'non-match' ' ' test_expect_success 'non-match value' ' - echo wow >expect && - git config --get nextsection.nonewline !for >actual && - test_cmp expect actual + test_cmp_config wow --get nextsection.nonewline !for ' test_expect_success 'multi-valued get returns final one' ' - echo "wow2 for me" >expect && - git config --get nextsection.nonewline >actual && - test_cmp expect actual + test_cmp_config "wow2 for me" --get nextsection.nonewline ' test_expect_success 'multi-valued get-all returns all' ' @@ -520,21 +506,11 @@ test_expect_success 'editing stdin is an error' ' test_expect_success 'refer config from subdirectory' ' mkdir x && - ( - cd x && - echo strasse >expect && - git config --get --file ../other-config ein.bahn >actual && - test_cmp expect actual - ) - + test_cmp_config -C x strasse --get --file ../other-config ein.bahn ' test_expect_success 'refer config from subdirectory via --file' ' - ( - cd x && - git config --file=../other-config --get ein.bahn >actual && - test_cmp expect actual - ) + test_cmp_config -C x strasse --file=../other-config --get ein.bahn ' cat > expect << EOF @@ -688,16 +664,13 @@ test_expect_success numbers ' test_expect_success '--int is at least 64 bits' ' git config giga.watts 121g && - echo 129922760704 >expect && - git config --int --get giga.watts >actual && - test_cmp expect actual + echo >expect && + test_cmp_config 129922760704 --int --get giga.watts ' test_expect_success 'invalid unit' ' git config aninvalid.unit "1auto" && - echo 1auto >expect && - git config aninvalid.unit >actual && - test_cmp expect actual && + test_cmp_config 1auto aninvalid.unit && test_must_fail git config --int --get aninvalid.unit 2>actual && test_i18ngrep "bad numeric config value .1auto. for .aninvalid.unit. in file .git/config: invalid unit" actual ' @@ -1001,7 +974,7 @@ EOF test_expect_success 'value continued on next line' ' git config --list > result && - test_cmp result expect + test_cmp expect result ' cat > .git/config <<\EOF @@ -1039,9 +1012,7 @@ test_expect_success '--null --get-regexp' ' test_expect_success 'inner whitespace kept verbatim' ' git config section.val "foo bar" && - echo "foo bar" >expect && - git config section.val >actual && - test_cmp expect actual + test_cmp_config "foo bar" section.val ' test_expect_success SYMLINKS 'symlinked configuration' ' @@ -1770,8 +1741,9 @@ test_expect_success '--show-origin stdin with file include' ' cat >expect <<-EOF && file:$INCLUDE_DIR/stdin.include include EOF - echo "[include]path=\"$INCLUDE_DIR\"/stdin.include" \ - | git config --show-origin --includes --file - user.stdin >output && + echo "[include]path=\"$INCLUDE_DIR\"/stdin.include" | + git config --show-origin --includes --file - user.stdin >output && + test_cmp expect output ' @@ -1808,21 +1780,15 @@ big = 1M EOF test_expect_success 'identical modern --type specifiers are allowed' ' - git config --type=int --type=int core.big >actual && - echo 1048576 >expect && - test_cmp expect actual + test_cmp_config 1048576 --type=int --type=int core.big ' test_expect_success 'identical legacy --type specifiers are allowed' ' - git config --int --int core.big >actual && - echo 1048576 >expect && - test_cmp expect actual + test_cmp_config 1048576 --int --int core.big ' test_expect_success 'identical mixed --type specifiers are allowed' ' - git config --int --type=int core.big >actual && - echo 1048576 >expect && - test_cmp expect actual + test_cmp_config 1048576 --int --type=int core.big ' test_expect_success 'non-identical modern --type specifiers are not allowed' ' @@ -1841,21 +1807,15 @@ test_expect_success 'non-identical mixed --type specifiers are not allowed' ' ' test_expect_success '--type allows valid type specifiers' ' - echo "true" >expect && - git config --type=bool core.foo >actual && - test_cmp expect actual + test_cmp_config true --type=bool core.foo ' test_expect_success '--no-type unsets type specifiers' ' - echo "10" >expect && - git config --type=bool --no-type core.number >actual && - test_cmp expect actual + test_cmp_config 10 --type=bool --no-type core.number ' test_expect_success 'unset type specifiers may be reset to conflicting ones' ' - echo 1048576 >expect && - git config --type=bool --no-type --type=int core.big >actual && - test_cmp expect actual + test_cmp_config 1048576 --type=bool --no-type --type=int core.big ' test_expect_success '--type rejects unknown specifiers' ' @@ -1881,7 +1841,7 @@ test_expect_success '--replace-all does not invent newlines' ' Qkey = b EOF git config --replace-all abc.key b && - test_cmp .git/config expect + test_cmp expect .git/config ' test_done diff --git a/t/t1303-wacky-config.sh b/t/t1303-wacky-config.sh index 3b92083e19..0000e664e7 100755 --- a/t/t1303-wacky-config.sh +++ b/t/t1303-wacky-config.sh @@ -14,7 +14,7 @@ setup() { check() { echo "$2" >expected git config --get "$1" >actual 2>&1 - test_cmp actual expected + test_cmp expected actual } # 'check section.key regex value' verifies that the entry for @@ -22,7 +22,7 @@ check() { check_regex() { echo "$3" >expected git config --get "$1" "$2" >actual 2>&1 - test_cmp actual expected + test_cmp expected actual } test_expect_success 'modify same key' ' diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index 02493f14ba..1fbd940408 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -346,7 +346,7 @@ test_expect_success "verifying $m's log (logged by config)" ' git update-ref $m $D cat >.git/logs/$m <<EOF -0000000000000000000000000000000000000000 $C $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150320 -0500 +$Z $C $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150320 -0500 $C $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150350 -0500 $A $B $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150380 -0500 $F $Z $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150680 -0500 @@ -366,7 +366,7 @@ test_expect_success 'Query master@{2005-05-25} (before history)' ' test_when_finished "rm -f o e" && git rev-parse --verify master@{2005-05-25} >o 2>e && test $C = $(cat o) && - echo test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" + test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" ' test_expect_success 'Query "master@{May 26 2005 23:31:59}" (1 second before history)' ' test_when_finished "rm -f o e" && diff --git a/t/t1405-main-ref-store.sh b/t/t1405-main-ref-store.sh index a74c38b5fb..331899ddc4 100755 --- a/t/t1405-main-ref-store.sh +++ b/t/t1405-main-ref-store.sh @@ -54,7 +54,7 @@ test_expect_success 'for_each_ref(refs/heads/)' ' ' test_expect_success 'for_each_ref() is sorted' ' - $RUN for-each-ref refs/heads/ | cut -c 42- >actual && + $RUN for-each-ref refs/heads/ | cut -d" " -f 2- >actual && sort actual > expected && test_cmp expected actual ' @@ -71,7 +71,7 @@ test_expect_success 'verify_ref(new-master)' ' ' test_expect_success 'for_each_reflog()' ' - $RUN for-each-reflog | sort -k2 | cut -c 42- >actual && + $RUN for-each-reflog | sort -k2 | cut -d" " -f 2- >actual && cat >expected <<-\EOF && HEAD 0x1 refs/heads/master 0x0 diff --git a/t/t1406-submodule-ref-store.sh b/t/t1406-submodule-ref-store.sh index e093782cc3..d199d872fb 100755 --- a/t/t1406-submodule-ref-store.sh +++ b/t/t1406-submodule-ref-store.sh @@ -39,7 +39,7 @@ test_expect_success 'rename_refs() not allowed' ' ' test_expect_success 'for_each_ref(refs/heads/)' ' - $RUN for-each-ref refs/heads/ | cut -c 42- >actual && + $RUN for-each-ref refs/heads/ | cut -d" " -f 2- >actual && cat >expected <<-\EOF && master 0x0 new-master 0x0 @@ -48,7 +48,7 @@ test_expect_success 'for_each_ref(refs/heads/)' ' ' test_expect_success 'for_each_ref() is sorted' ' - $RUN for-each-ref refs/heads/ | cut -c 42- >actual && + $RUN for-each-ref refs/heads/ | cut -d" " -f 2- >actual && sort actual > expected && test_cmp expected actual ' @@ -65,7 +65,7 @@ test_expect_success 'verify_ref(new-master)' ' ' test_expect_success 'for_each_reflog()' ' - $RUN for-each-reflog | sort | cut -c 42- >actual && + $RUN for-each-reflog | sort | cut -d" " -f 2- >actual && cat >expected <<-\EOF && HEAD 0x1 refs/heads/master 0x0 diff --git a/t/t1407-worktree-ref-store.sh b/t/t1407-worktree-ref-store.sh index 4623ae15c4..9a84858118 100755 --- a/t/t1407-worktree-ref-store.sh +++ b/t/t1407-worktree-ref-store.sh @@ -58,7 +58,7 @@ test_expect_success 'for_each_reflog()' ' mkdir -p .git/worktrees/wt/logs/refs/bisect && echo $ZERO_OID > .git/worktrees/wt/logs/refs/bisect/wt-random && - $RWT for-each-reflog | cut -c 42- | sort >actual && + $RWT for-each-reflog | cut -d" " -f 2- | sort >actual && cat >expected <<-\EOF && HEAD 0x1 PSEUDO-WT 0x0 @@ -68,7 +68,7 @@ test_expect_success 'for_each_reflog()' ' EOF test_cmp expected actual && - $RMAIN for-each-reflog | cut -c 42- | sort >actual && + $RMAIN for-each-reflog | cut -d" " -f 2- | sort >actual && cat >expected <<-\EOF && HEAD 0x1 PSEUDO-MAIN 0x0 diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 28201677d5..e20e8fa830 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -708,16 +708,35 @@ test_expect_success 'fsck detects trailing loose garbage (commit)' ' test_i18ngrep "garbage.*$commit" out ' -test_expect_success 'fsck detects trailing loose garbage (blob)' ' +test_expect_success 'fsck detects trailing loose garbage (large blob)' ' blob=$(echo trailing | git hash-object -w --stdin) && file=$(sha1_file $blob) && test_when_finished "remove_object $blob" && chmod +w "$file" && echo garbage >>"$file" && - test_must_fail git fsck 2>out && + test_must_fail git -c core.bigfilethreshold=5 fsck 2>out && test_i18ngrep "garbage.*$blob" out ' +test_expect_success 'fsck detects truncated loose object' ' + # make it big enough that we know we will truncate in the data + # portion, not the header + test-tool genrandom truncate 4096 >file && + blob=$(git hash-object -w file) && + file=$(sha1_file $blob) && + test_when_finished "remove_object $blob" && + test_copy_bytes 1024 <"$file" >tmp && + rm "$file" && + mv -f tmp "$file" && + + # check both regular and streaming code paths + test_must_fail git fsck 2>out && + test_i18ngrep corrupt.*$blob out && + + test_must_fail git -c core.bigfilethreshold=128 fsck 2>out && + test_i18ngrep corrupt.*$blob out +' + # for each of type, we have one version which is referenced by another object # (and so while unreachable, not dangling), and another variant which really is # dangling. diff --git a/t/t1500-rev-parse.sh b/t/t1500-rev-parse.sh index 5c715fe2cf..01abee533d 100755 --- a/t/t1500-rev-parse.sh +++ b/t/t1500-rev-parse.sh @@ -142,6 +142,22 @@ test_expect_success 'showing the superproject correctly' ' git -C super submodule add ../sub dir/sub && echo $(pwd)/super >expect && git -C super/dir/sub rev-parse --show-superproject-working-tree >out && + test_cmp expect out && + + test_commit -C super submodule_add && + git -C super checkout -b branch1 && + git -C super/dir/sub checkout -b branch1 && + test_commit -C super/dir/sub branch1_commit && + git -C super add dir/sub && + test_commit -C super branch1_commit && + git -C super checkout -b branch2 master && + git -C super/dir/sub checkout -b branch2 master && + test_commit -C super/dir/sub branch2_commit && + git -C super add dir/sub && + test_commit -C super branch2_commit && + test_must_fail git -C super merge branch1 && + + git -C super/dir/sub rev-parse --show-superproject-working-tree >out && test_cmp expect out ' diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index be22398a85..4667e1a190 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -6,13 +6,27 @@ test_description='split index mode tests' # We need total control of index splitting here sane_unset GIT_TEST_SPLIT_INDEX -sane_unset GIT_FSMONITOR_TEST + +# Testing a hard coded SHA against an index with an extension +# that can vary from run to run is problematic so we disable +# those extensions. +sane_unset GIT_TEST_FSMONITOR +sane_unset GIT_TEST_INDEX_THREADS + +# Create a file named as $1 with content read from stdin. +# Set the file's mtime to a few seconds in the past to avoid racy situations. +create_non_racy_file () { + cat >"$1" && + test-tool chmtime =-5 "$1" +} test_expect_success 'enable split index' ' git config splitIndex.maxPercentChange 100 && git update-index --split-index && test-tool dump-split-index .git/index >actual && indexversion=$(test-tool index-version <.git/index) && + + # NEEDSWORK: Stop hard-coding checksums. if test "$indexversion" = "4" then own=432ef4b63f32193984f339431fd50ca796493569 @@ -21,6 +35,7 @@ test_expect_success 'enable split index' ' own=8299b0bcd1ac364e5f1d7768efb62fa2da79a339 base=39d890139ee5356c7ef572216cebcd27aa41f9df fi && + cat >expect <<-EOF && own $own base $base @@ -31,7 +46,7 @@ test_expect_success 'enable split index' ' ' test_expect_success 'add one file' ' - : >one && + create_non_racy_file one && git update-index --add one && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && @@ -83,7 +98,7 @@ test_expect_success 'enable split index again, "one" now belongs to base index"' ' test_expect_success 'modify original file, base index untouched' ' - echo modified >one && + echo modified | create_non_racy_file one && git update-index one && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && @@ -102,7 +117,7 @@ test_expect_success 'modify original file, base index untouched' ' ' test_expect_success 'add another file, which stays index' ' - : >two && + create_non_racy_file two && git update-index --add two && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && @@ -155,7 +170,7 @@ test_expect_success 'remove file in base index' ' ' test_expect_success 'add original file back' ' - : >one && + create_non_racy_file one && git update-index --add one && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && @@ -174,7 +189,7 @@ test_expect_success 'add original file back' ' ' test_expect_success 'add new file' ' - : >two && + create_non_racy_file two && git update-index --add two && git ls-files --stage >actual && cat >expect <<-EOF && @@ -218,7 +233,7 @@ test_expect_success 'rev-parse --shared-index-path' ' test_expect_success 'set core.splitIndex config variable to true' ' git config core.splitIndex true && - : >three && + create_non_racy_file three && git update-index --add three && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && @@ -253,9 +268,9 @@ test_expect_success 'set core.splitIndex config variable to false' ' test_cmp expect actual ' -test_expect_success 'set core.splitIndex config variable to true' ' +test_expect_success 'set core.splitIndex config variable back to true' ' git config core.splitIndex true && - : >three && + create_non_racy_file three && git update-index --add three && BASE=$(test-tool dump-split-index .git/index | grep "^base") && test-tool dump-split-index .git/index | sed "/^own/d" >actual && @@ -265,7 +280,7 @@ test_expect_success 'set core.splitIndex config variable to true' ' deletions: EOF test_cmp expect actual && - : >four && + create_non_racy_file four && git update-index --add four && test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && @@ -279,7 +294,7 @@ test_expect_success 'set core.splitIndex config variable to true' ' test_expect_success 'check behavior with splitIndex.maxPercentChange unset' ' git config --unset splitIndex.maxPercentChange && - : >five && + create_non_racy_file five && git update-index --add five && BASE=$(test-tool dump-split-index .git/index | grep "^base") && test-tool dump-split-index .git/index | sed "/^own/d" >actual && @@ -289,7 +304,7 @@ test_expect_success 'check behavior with splitIndex.maxPercentChange unset' ' deletions: EOF test_cmp expect actual && - : >six && + create_non_racy_file six && git update-index --add six && test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && @@ -303,7 +318,7 @@ test_expect_success 'check behavior with splitIndex.maxPercentChange unset' ' test_expect_success 'check splitIndex.maxPercentChange set to 0' ' git config splitIndex.maxPercentChange 0 && - : >seven && + create_non_racy_file seven && git update-index --add seven && BASE=$(test-tool dump-split-index .git/index | grep "^base") && test-tool dump-split-index .git/index | sed "/^own/d" >actual && @@ -313,7 +328,7 @@ test_expect_success 'check splitIndex.maxPercentChange set to 0' ' deletions: EOF test_cmp expect actual && - : >eight && + create_non_racy_file eight && git update-index --add eight && BASE=$(test-tool dump-split-index .git/index | grep "^base") && test-tool dump-split-index .git/index | sed "/^own/d" >actual && @@ -326,17 +341,17 @@ test_expect_success 'check splitIndex.maxPercentChange set to 0' ' ' test_expect_success 'shared index files expire after 2 weeks by default' ' - : >ten && + create_non_racy_file ten && git update-index --add ten && test $(ls .git/sharedindex.* | wc -l) -gt 2 && just_under_2_weeks_ago=$((5-14*86400)) && test-tool chmtime =$just_under_2_weeks_ago .git/sharedindex.* && - : >eleven && + create_non_racy_file eleven && git update-index --add eleven && test $(ls .git/sharedindex.* | wc -l) -gt 2 && just_over_2_weeks_ago=$((-1-14*86400)) && test-tool chmtime =$just_over_2_weeks_ago .git/sharedindex.* && - : >twelve && + create_non_racy_file twelve && git update-index --add twelve && test $(ls .git/sharedindex.* | wc -l) -le 2 ' @@ -344,12 +359,12 @@ test_expect_success 'shared index files expire after 2 weeks by default' ' test_expect_success 'check splitIndex.sharedIndexExpire set to 16 days' ' git config splitIndex.sharedIndexExpire "16.days.ago" && test-tool chmtime =$just_over_2_weeks_ago .git/sharedindex.* && - : >thirteen && + create_non_racy_file thirteen && git update-index --add thirteen && test $(ls .git/sharedindex.* | wc -l) -gt 2 && just_over_16_days_ago=$((-1-16*86400)) && test-tool chmtime =$just_over_16_days_ago .git/sharedindex.* && - : >fourteen && + create_non_racy_file fourteen && git update-index --add fourteen && test $(ls .git/sharedindex.* | wc -l) -le 2 ' @@ -358,17 +373,37 @@ test_expect_success 'check splitIndex.sharedIndexExpire set to "never" and "now" git config splitIndex.sharedIndexExpire never && just_10_years_ago=$((-365*10*86400)) && test-tool chmtime =$just_10_years_ago .git/sharedindex.* && - : >fifteen && + create_non_racy_file fifteen && git update-index --add fifteen && test $(ls .git/sharedindex.* | wc -l) -gt 2 && git config splitIndex.sharedIndexExpire now && just_1_second_ago=-1 && test-tool chmtime =$just_1_second_ago .git/sharedindex.* && - : >sixteen && + create_non_racy_file sixteen && git update-index --add sixteen && test $(ls .git/sharedindex.* | wc -l) -le 2 ' +test_expect_success POSIXPERM 'same mode for index & split index' ' + git init same-mode && + ( + cd same-mode && + test_commit A && + test_modebits .git/index >index_mode && + test_must_fail git config core.sharedRepository && + git -c core.splitIndex=true status && + shared=$(ls .git/sharedindex.*) && + case "$shared" in + *" "*) + # we have more than one??? + false ;; + *) + test_modebits "$shared" >split_index_mode && + test_cmp index_mode split_index_mode ;; + esac + ) +' + while read -r mode modebits do test_expect_success POSIXPERM "split index respects core.sharedrepository $mode" ' @@ -379,7 +414,7 @@ do # Create one new shared index file git config core.sharedrepository "$mode" && git config core.splitIndex true && - : >one && + create_non_racy_file one && git update-index --add one && echo "$modebits" >expect && test_modebits .git/index >actual && diff --git a/t/t1701-racy-split-index.sh b/t/t1701-racy-split-index.sh new file mode 100755 index 0000000000..5dc221ef38 --- /dev/null +++ b/t/t1701-racy-split-index.sh @@ -0,0 +1,214 @@ +#!/bin/sh + +# This test can give false success if your machine is sufficiently +# slow or all trials happened to happen on second boundaries. + +test_description='racy split index' + +. ./test-lib.sh + +test_expect_success 'setup' ' + # Only split the index when the test explicitly says so. + sane_unset GIT_TEST_SPLIT_INDEX && + git config splitIndex.maxPercentChange 100 && + + echo "cached content" >racy-file && + git add racy-file && + git commit -m initial && + + echo something >other-file && + # No raciness with this file. + test-tool chmtime =-20 other-file && + + echo "+cached content" >expect +' + +check_cached_diff () { + git diff-index --patch --cached $EMPTY_TREE racy-file >diff && + tail -1 diff >actual && + test_cmp expect actual +} + +trials="0 1 2 3 4" +for trial in $trials +do + test_expect_success "split the index while adding a racily clean file #$trial" ' + rm -f .git/index .git/sharedindex.* && + + # The next three commands must be run within the same + # second (so both writes to racy-file result in the same + # mtime) to create the interesting racy situation. + echo "cached content" >racy-file && + + # Update and split the index. The cache entry of + # racy-file will be stored only in the shared index. + git update-index --split-index --add racy-file && + + # File size must stay the same. + echo "dirty worktree" >racy-file && + + # Subsequent git commands should notice that racy-file + # and the split index have the same mtime, and check + # the content of the file to see if it is actually + # clean. + check_cached_diff + ' +done + +for trial in $trials +do + test_expect_success "add a racily clean file to an already split index #$trial" ' + rm -f .git/index .git/sharedindex.* && + + git update-index --split-index && + + # The next three commands must be run within the same + # second. + echo "cached content" >racy-file && + + # Update the split index. The cache entry of racy-file + # will be stored only in the split index. + git update-index --add racy-file && + + # File size must stay the same. + echo "dirty worktree" >racy-file && + + # Subsequent git commands should notice that racy-file + # and the split index have the same mtime, and check + # the content of the file to see if it is actually + # clean. + check_cached_diff + ' +done + +for trial in $trials +do + test_expect_success "split the index when the index contains a racily clean cache entry #$trial" ' + rm -f .git/index .git/sharedindex.* && + + # The next three commands must be run within the same + # second. + echo "cached content" >racy-file && + + git update-index --add racy-file && + + # File size must stay the same. + echo "dirty worktree" >racy-file && + + # Now wait a bit to ensure that the split index written + # below will get a more recent mtime than racy-file. + sleep 1 && + + # Update and split the index when the index contains + # the racily clean cache entry of racy-file. + # A corresponding replacement cache entry with smudged + # stat data should be added to the new split index. + git update-index --split-index --add other-file && + + # Subsequent git commands should notice the smudged + # stat data in the replacement cache entry and that it + # doesnt match with the file the worktree. + check_cached_diff + ' +done + +for trial in $trials +do + test_expect_success "update the split index when it contains a new racily clean cache entry #$trial" ' + rm -f .git/index .git/sharedindex.* && + + git update-index --split-index && + + # The next three commands must be run within the same + # second. + echo "cached content" >racy-file && + + # Update the split index. The cache entry of racy-file + # will be stored only in the split index. + git update-index --add racy-file && + + # File size must stay the same. + echo "dirty worktree" >racy-file && + + # Now wait a bit to ensure that the split index written + # below will get a more recent mtime than racy-file. + sleep 1 && + + # Update the split index when the racily clean cache + # entry of racy-file is only stored in the split index. + # An updated cache entry with smudged stat data should + # be added to the new split index. + git update-index --add other-file && + + # Subsequent git commands should notice the smudged + # stat data. + check_cached_diff + ' +done + +for trial in $trials +do + test_expect_success "update the split index when a racily clean cache entry is stored only in the shared index #$trial" ' + rm -f .git/index .git/sharedindex.* && + + # The next three commands must be run within the same + # second. + echo "cached content" >racy-file && + + # Update and split the index. The cache entry of + # racy-file will be stored only in the shared index. + git update-index --split-index --add racy-file && + + # File size must stay the same. + echo "dirty worktree" >racy-file && + + # Now wait a bit to ensure that the split index written + # below will get a more recent mtime than racy-file. + sleep 1 && + + # Update the split index when the racily clean cache + # entry of racy-file is only stored in the shared index. + # A corresponding replacement cache entry with smudged + # stat data should be added to the new split index. + git update-index --add other-file && + + # Subsequent git commands should notice the smudged + # stat data. + check_cached_diff + ' +done + +for trial in $trials +do + test_expect_success "update the split index after unpack trees() copied a racily clean cache entry from the shared index #$trial" ' + rm -f .git/index .git/sharedindex.* && + + # The next three commands must be run within the same + # second. + echo "cached content" >racy-file && + + # Update and split the index. The cache entry of + # racy-file will be stored only in the shared index. + git update-index --split-index --add racy-file && + + # File size must stay the same. + echo "dirty worktree" >racy-file && + + # Now wait a bit to ensure that the split index written + # below will get a more recent mtime than racy-file. + sleep 1 && + + # Update the split index after unpack_trees() copied the + # racily clean cache entry of racy-file from the shared + # index. A corresponding replacement cache entry + # with smudged stat data should be added to the new + # split index. + git read-tree -m HEAD && + + # Subsequent git commands should notice the smudged + # stat data. + check_cached_diff + ' +done + +test_done diff --git a/t/t2000-checkout-cache-clash.sh b/t/t2000-checkout-cache-clash.sh deleted file mode 100755 index de3edb5d57..0000000000 --- a/t/t2000-checkout-cache-clash.sh +++ /dev/null @@ -1,60 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2005 Junio C Hamano -# - -test_description='git checkout-index test. - -This test registers the following filesystem structure in the -cache: - - path0 - a file - path1/file1 - a file in a directory - -And then tries to checkout in a work tree that has the following: - - path0/file0 - a file in a directory - path1 - a file - -The git checkout-index command should fail when attempting to checkout -path0, finding it is occupied by a directory, and path1/file1, finding -path1 is occupied by a non-directory. With "-f" flag, it should remove -the conflicting paths and succeed. -' -. ./test-lib.sh - -date >path0 -mkdir path1 -date >path1/file1 - -test_expect_success \ - 'git update-index --add various paths.' \ - 'git update-index --add path0 path1/file1' - -rm -fr path0 path1 -mkdir path0 -date >path0/file0 -date >path1 - -test_expect_success \ - 'git checkout-index without -f should fail on conflicting work tree.' \ - 'test_must_fail git checkout-index -a' - -test_expect_success \ - 'git checkout-index with -f should succeed.' \ - 'git checkout-index -f -a' - -test_expect_success \ - 'git checkout-index conflicting paths.' \ - 'test -f path0 && test -d path1 && test -f path1/file1' - -test_expect_success SYMLINKS 'checkout-index -f twice with --prefix' ' - mkdir -p tar/get && - ln -s tar/get there && - echo first && - git checkout-index -a -f --prefix=there/ && - echo second && - git checkout-index -a -f --prefix=there/ -' - -test_done diff --git a/t/t2000-conflict-when-checking-files-out.sh b/t/t2000-conflict-when-checking-files-out.sh new file mode 100755 index 0000000000..f18616ad2b --- /dev/null +++ b/t/t2000-conflict-when-checking-files-out.sh @@ -0,0 +1,135 @@ +#!/bin/sh +# +# Copyright (c) 2005 Junio C Hamano +# + +test_description='git conflicts when checking files out test.' + +# The first test registers the following filesystem structure in the +# cache: +# +# path0 - a file +# path1/file1 - a file in a directory +# +# And then tries to checkout in a work tree that has the following: +# +# path0/file0 - a file in a directory +# path1 - a file +# +# The git checkout-index command should fail when attempting to checkout +# path0, finding it is occupied by a directory, and path1/file1, finding +# path1 is occupied by a non-directory. With "-f" flag, it should remove +# the conflicting paths and succeed. + +. ./test-lib.sh + +show_files() { + # show filesystem files, just [-dl] for type and name + find path? -ls | + sed -e 's/^[0-9]* * [0-9]* * \([-bcdl]\)[^ ]* *[0-9]* *[^ ]* *[^ ]* *[0-9]* [A-Z][a-z][a-z] [0-9][0-9] [^ ]* /fs: \1 /' + # what's in the cache, just mode and name + git ls-files --stage | + sed -e 's/^\([0-9]*\) [0-9a-f]* [0-3] /ca: \1 /' + # what's in the tree, just mode and name. + git ls-tree -r "$1" | + sed -e 's/^\([0-9]*\) [^ ]* [0-9a-f]* /tr: \1 /' +} + +date >path0 +mkdir path1 +date >path1/file1 + +test_expect_success \ + 'git update-index --add various paths.' \ + 'git update-index --add path0 path1/file1' + +rm -fr path0 path1 +mkdir path0 +date >path0/file0 +date >path1 + +test_expect_success \ + 'git checkout-index without -f should fail on conflicting work tree.' \ + 'test_must_fail git checkout-index -a' + +test_expect_success \ + 'git checkout-index with -f should succeed.' \ + 'git checkout-index -f -a' + +test_expect_success \ + 'git checkout-index conflicting paths.' \ + 'test -f path0 && test -d path1 && test -f path1/file1' + +test_expect_success SYMLINKS 'checkout-index -f twice with --prefix' ' + mkdir -p tar/get && + ln -s tar/get there && + echo first && + git checkout-index -a -f --prefix=there/ && + echo second && + git checkout-index -a -f --prefix=there/ +' + +# The second test registers the following filesystem structure in the cache: +# +# path2/file0 - a file in a directory +# path3/file1 - a file in a directory +# +# and attempts to check it out when the work tree has: +# +# path2/file0 - a file in a directory +# path3 - a symlink pointing at "path2" +# +# Checkout cache should fail to extract path3/file1 because the leading +# path path3 is occupied by a non-directory. With "-f" it should remove +# the symlink path3 and create directory path3 and file path3/file1. + +mkdir path2 +date >path2/file0 +test_expect_success \ + 'git update-index --add path2/file0' \ + 'git update-index --add path2/file0' +test_expect_success \ + 'writing tree out with git write-tree' \ + 'tree1=$(git write-tree)' +test_debug 'show_files $tree1' + +mkdir path3 +date >path3/file1 +test_expect_success \ + 'git update-index --add path3/file1' \ + 'git update-index --add path3/file1' +test_expect_success \ + 'writing tree out with git write-tree' \ + 'tree2=$(git write-tree)' +test_debug 'show_files $tree2' + +rm -fr path3 +test_expect_success \ + 'read previously written tree and checkout.' \ + 'git read-tree -m $tree1 && git checkout-index -f -a' +test_debug 'show_files $tree1' + +test_expect_success \ + 'add a symlink' \ + 'test_ln_s_add path2 path3' +test_expect_success \ + 'writing tree out with git write-tree' \ + 'tree3=$(git write-tree)' +test_debug 'show_files $tree3' + +# Morten says "Got that?" here. +# Test begins. + +test_expect_success \ + 'read previously written tree and checkout.' \ + 'git read-tree $tree2 && git checkout-index -f -a' +test_debug 'show_files $tree2' + +test_expect_success \ + 'checking out conflicting path with -f' \ + 'test ! -h path2 && test -d path2 && + test ! -h path3 && test -d path3 && + test ! -h path2/file0 && test -f path2/file0 && + test ! -h path3/file1 && test -f path3/file1' + +test_done diff --git a/t/t2001-checkout-cache-clash.sh b/t/t2001-checkout-cache-clash.sh deleted file mode 100755 index 1fc8e634b7..0000000000 --- a/t/t2001-checkout-cache-clash.sh +++ /dev/null @@ -1,85 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2005 Junio C Hamano -# - -test_description='git checkout-index test. - -This test registers the following filesystem structure in the cache: - - path0/file0 - a file in a directory - path1/file1 - a file in a directory - -and attempts to check it out when the work tree has: - - path0/file0 - a file in a directory - path1 - a symlink pointing at "path0" - -Checkout cache should fail to extract path1/file1 because the leading -path path1 is occupied by a non-directory. With "-f" it should remove -the symlink path1 and create directory path1 and file path1/file1. -' -. ./test-lib.sh - -show_files() { - # show filesystem files, just [-dl] for type and name - find path? -ls | - sed -e 's/^[0-9]* * [0-9]* * \([-bcdl]\)[^ ]* *[0-9]* *[^ ]* *[^ ]* *[0-9]* [A-Z][a-z][a-z] [0-9][0-9] [^ ]* /fs: \1 /' - # what's in the cache, just mode and name - git ls-files --stage | - sed -e 's/^\([0-9]*\) [0-9a-f]* [0-3] /ca: \1 /' - # what's in the tree, just mode and name. - git ls-tree -r "$1" | - sed -e 's/^\([0-9]*\) [^ ]* [0-9a-f]* /tr: \1 /' -} - -mkdir path0 -date >path0/file0 -test_expect_success \ - 'git update-index --add path0/file0' \ - 'git update-index --add path0/file0' -test_expect_success \ - 'writing tree out with git write-tree' \ - 'tree1=$(git write-tree)' -test_debug 'show_files $tree1' - -mkdir path1 -date >path1/file1 -test_expect_success \ - 'git update-index --add path1/file1' \ - 'git update-index --add path1/file1' -test_expect_success \ - 'writing tree out with git write-tree' \ - 'tree2=$(git write-tree)' -test_debug 'show_files $tree2' - -rm -fr path1 -test_expect_success \ - 'read previously written tree and checkout.' \ - 'git read-tree -m $tree1 && git checkout-index -f -a' -test_debug 'show_files $tree1' - -test_expect_success \ - 'add a symlink' \ - 'test_ln_s_add path0 path1' -test_expect_success \ - 'writing tree out with git write-tree' \ - 'tree3=$(git write-tree)' -test_debug 'show_files $tree3' - -# Morten says "Got that?" here. -# Test begins. - -test_expect_success \ - 'read previously written tree and checkout.' \ - 'git read-tree $tree2 && git checkout-index -f -a' -test_debug 'show_files $tree2' - -test_expect_success \ - 'checking out conflicting path with -f' \ - 'test ! -h path0 && test -d path0 && - test ! -h path1 && test -d path1 && - test ! -h path0/file0 && test -f path0/file0 && - test ! -h path1/file1 && test -f path1/file1' - -test_done diff --git a/t/t2029-worktree-config.sh b/t/t2029-worktree-config.sh new file mode 100755 index 0000000000..286121d8de --- /dev/null +++ b/t/t2029-worktree-config.sh @@ -0,0 +1,79 @@ +#!/bin/sh + +test_description="config file in multi worktree" + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit start +' + +test_expect_success 'config --worktree in single worktree' ' + git config --worktree foo.bar true && + test_cmp_config true foo.bar +' + +test_expect_success 'add worktrees' ' + git worktree add wt1 && + git worktree add wt2 +' + +test_expect_success 'config --worktree without extension' ' + test_must_fail git config --worktree foo.bar false +' + +test_expect_success 'enable worktreeConfig extension' ' + git config extensions.worktreeConfig true && + test_cmp_config true extensions.worktreeConfig +' + +test_expect_success 'config is shared as before' ' + git config this.is shared && + test_cmp_config shared this.is && + test_cmp_config -C wt1 shared this.is && + test_cmp_config -C wt2 shared this.is +' + +test_expect_success 'config is shared (set from another worktree)' ' + git -C wt1 config that.is also-shared && + test_cmp_config also-shared that.is && + test_cmp_config -C wt1 also-shared that.is && + test_cmp_config -C wt2 also-shared that.is +' + +test_expect_success 'config private to main worktree' ' + git config --worktree this.is for-main && + test_cmp_config for-main this.is && + test_cmp_config -C wt1 shared this.is && + test_cmp_config -C wt2 shared this.is +' + +test_expect_success 'config private to linked worktree' ' + git -C wt1 config --worktree this.is for-wt1 && + test_cmp_config for-main this.is && + test_cmp_config -C wt1 for-wt1 this.is && + test_cmp_config -C wt2 shared this.is +' + +test_expect_success 'core.bare no longer for main only' ' + test_config core.bare true && + test "$(git rev-parse --is-bare-repository)" = true && + test "$(git -C wt1 rev-parse --is-bare-repository)" = true && + test "$(git -C wt2 rev-parse --is-bare-repository)" = true +' + +test_expect_success 'per-worktree core.bare is picked up' ' + git -C wt1 config --worktree core.bare true && + test "$(git rev-parse --is-bare-repository)" = false && + test "$(git -C wt1 rev-parse --is-bare-repository)" = true && + test "$(git -C wt2 rev-parse --is-bare-repository)" = false +' + +test_expect_success 'config.worktree no longer read without extension' ' + git config --unset extensions.worktreeConfig && + test_cmp_config shared this.is && + test_cmp_config -C wt1 shared this.is && + test_cmp_config -C wt2 shared this.is +' + +test_done diff --git a/t/t2101-update-index-reupdate.sh b/t/t2101-update-index-reupdate.sh index 685ec45639..6c32d42c8c 100755 --- a/t/t2101-update-index-reupdate.sh +++ b/t/t2101-update-index-reupdate.sh @@ -73,7 +73,7 @@ test_expect_success 'update-index --update from subdir' ' 100644 $(git hash-object dir1/file3) 0 dir1/file3 100644 $file2 0 file2 EOF - test_cmp current expected + test_cmp expected current ' test_expect_success 'update-index --update with pathspec' ' diff --git a/t/t3070-wildmatch.sh b/t/t3070-wildmatch.sh index 46aca0af10..891d4d7cb9 100755 --- a/t/t3070-wildmatch.sh +++ b/t/t3070-wildmatch.sh @@ -237,7 +237,7 @@ match 0 0 0 0 foobar 'foo\*bar' match 1 1 1 1 'f\oo' 'f\\oo' match 1 1 1 1 ball '*[al]?' match 0 0 0 0 ten '[ten]' -match 0 0 1 1 ten '**[!te]' +match 1 1 1 1 ten '**[!te]' match 0 0 0 0 ten '**[!ten]' match 1 1 1 1 ten 't[a-g]n' match 0 0 0 0 ten 't[!a-g]n' @@ -253,7 +253,7 @@ match 1 1 1 1 ']' ']' # Extended slash-matching features match 0 0 1 1 'foo/baz/bar' 'foo*bar' match 0 0 1 1 'foo/baz/bar' 'foo**bar' -match 0 0 1 1 'foobazbar' 'foo**bar' +match 1 1 1 1 'foobazbar' 'foo**bar' match 1 1 1 1 'foo/baz/bar' 'foo/**/bar' match 1 1 0 0 'foo/baz/bar' 'foo/**/**/bar' match 1 1 1 1 'foo/b/a/z/bar' 'foo/**/bar' diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 93f21ab078..478b82cf9b 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -1221,7 +1221,7 @@ test_expect_success 'use --edit-description' ' EOF EDITOR=./editor git branch --edit-description && echo "New contents" >expect && - test_cmp EDITOR_OUTPUT expect + test_cmp expect EDITOR_OUTPUT ' test_expect_success 'detect typo in branch name when using --edit-description' ' diff --git a/t/t3206-range-diff.sh b/t/t3206-range-diff.sh index 045aca1c18..e497c1358f 100755 --- a/t/t3206-range-diff.sh +++ b/t/t3206-range-diff.sh @@ -122,6 +122,65 @@ test_expect_success 'changed commit' ' test_cmp expected actual ' +test_expect_success 'changed commit with --no-patch diff option' ' + git range-diff --no-color --no-patch topic...changed >actual && + cat >expected <<-EOF && + 1: 4de457d = 1: a4b3333 s/5/A/ + 2: fccce22 = 2: f51d370 s/4/A/ + 3: 147e64e ! 3: 0559556 s/11/B/ + 4: a63e992 ! 4: d966c5c s/12/B/ + EOF + test_cmp expected actual +' + +test_expect_success 'changed commit with --stat diff option' ' + git range-diff --no-color --stat topic...changed >actual && + cat >expected <<-EOF && + 1: 4de457d = 1: a4b3333 s/5/A/ + a => b | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + 2: fccce22 = 2: f51d370 s/4/A/ + a => b | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + 3: 147e64e ! 3: 0559556 s/11/B/ + a => b | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + 4: a63e992 ! 4: d966c5c s/12/B/ + a => b | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + EOF + test_cmp expected actual +' + +test_expect_success 'changed commit with sm config' ' + git range-diff --no-color --submodule=log topic...changed >actual && + cat >expected <<-EOF && + 1: 4de457d = 1: a4b3333 s/5/A/ + 2: fccce22 = 2: f51d370 s/4/A/ + 3: 147e64e ! 3: 0559556 s/11/B/ + @@ -10,7 +10,7 @@ + 9 + 10 + -11 + -+B + ++BB + 12 + 13 + 14 + 4: a63e992 ! 4: d966c5c s/12/B/ + @@ -8,7 +8,7 @@ + @@ + 9 + 10 + - B + + BB + -12 + +B + 13 + EOF + test_cmp expected actual +' + test_expect_success 'no commits on one side' ' git commit --amend -m "new message" && git range-diff master HEAD@{1} HEAD diff --git a/t/t3320-notes-merge-worktrees.sh b/t/t3320-notes-merge-worktrees.sh index 10bfc8b947..823fdbda1f 100755 --- a/t/t3320-notes-merge-worktrees.sh +++ b/t/t3320-notes-merge-worktrees.sh @@ -44,7 +44,7 @@ test_expect_success 'merge z into y fails and sets NOTES_MERGE_REF' ' git config core.notesRef refs/notes/y && test_must_fail git notes merge z && echo "ref: refs/notes/y" >expect && - test_cmp .git/NOTES_MERGE_REF expect + test_cmp expect .git/NOTES_MERGE_REF ' test_expect_success 'merge z into y while mid-merge in another workdir fails' ' @@ -66,7 +66,7 @@ test_expect_success 'merge z into x while mid-merge on y succeeds' ' grep -v "A notes merge into refs/notes/x is already in-progress in" out ) && echo "ref: refs/notes/x" >expect && - test_cmp .git/worktrees/worktree2/NOTES_MERGE_REF expect + test_cmp expect .git/worktrees/worktree2/NOTES_MERGE_REF ' test_done diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 3996ee0135..3e73f7584c 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -183,13 +183,13 @@ test_expect_success 'cherry-picked commits and fork-point work together' ' test_commit final_B B "Final B" && git rebase && echo Amended >expect && - test_cmp A expect && + test_cmp expect A && echo "Final B" >expect && - test_cmp B expect && + test_cmp expect B && echo C >expect && - test_cmp C expect && + test_cmp expect C && echo D >expect && - test_cmp D expect + test_cmp expect D ' test_expect_success 'rebase -q is quiet' ' diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index ff89b6341a..7a440e08d8 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -75,6 +75,16 @@ test_expect_success 'rebase --keep-empty' ' test_line_count = 6 actual ' +cat > expect <<EOF +error: nothing to do +EOF + +test_expect_success 'rebase -i with empty HEAD' ' + set_fake_editor && + test_must_fail env FAKE_LINES="1 exec_true" git rebase -i HEAD^ >actual 2>&1 && + test_i18ncmp expect actual +' + test_expect_success 'rebase -i with the exec command' ' git checkout master && ( @@ -114,7 +124,7 @@ test_expect_success 'rebase -i with exec allows git commands in subdirs' ' git checkout master && mkdir subdir && (cd subdir && set_fake_editor && - FAKE_LINES="1 exec_cd_subdir_&&_git_rev-parse_--is-inside-work-tree" \ + FAKE_LINES="1 x_cd_subdir_&&_git_rev-parse_--is-inside-work-tree" \ git rebase -i HEAD^ ) ' @@ -312,7 +322,7 @@ test_expect_success 'retain authorship when squashing' ' git show HEAD | grep "^Author: Twerp Snog" ' -test_expect_success '-p handles "no changes" gracefully' ' +test_expect_success REBASE_P '-p handles "no changes" gracefully' ' HEAD=$(git rev-parse HEAD) && set_fake_editor && git rebase -i -p HEAD^ && @@ -322,7 +332,7 @@ test_expect_success '-p handles "no changes" gracefully' ' test $HEAD = $(git rev-parse HEAD) ' -test_expect_failure 'exchange two commits with -p' ' +test_expect_failure REBASE_P 'exchange two commits with -p' ' git checkout H && set_fake_editor && FAKE_LINES="2 1" git rebase -i -p HEAD~2 && @@ -330,7 +340,7 @@ test_expect_failure 'exchange two commits with -p' ' test G = $(git cat-file commit HEAD | sed -ne \$p) ' -test_expect_success 'preserve merges with -p' ' +test_expect_success REBASE_P 'preserve merges with -p' ' git checkout -b to-be-preserved master^ && : > unrelated-file && git add unrelated-file && @@ -373,7 +383,7 @@ test_expect_success 'preserve merges with -p' ' test $(git show HEAD:unrelated-file) = 1 ' -test_expect_success 'edit ancestor with -p' ' +test_expect_success REBASE_P 'edit ancestor with -p' ' set_fake_editor && FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3 && echo 2 > unrelated-file && @@ -387,6 +397,7 @@ test_expect_success 'edit ancestor with -p' ' ' test_expect_success '--continue tries to commit' ' + git reset --hard D && test_tick && set_fake_editor && test_must_fail git rebase -i --onto new-branch1 HEAD^ && @@ -426,7 +437,7 @@ test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' ' git rebase -i $base && test $base = $(git rev-parse HEAD^) && test 0 = $(git show | grep NEVER | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D multi-fixup ' @@ -441,7 +452,7 @@ test_expect_success 'commit message used after conflict' ' git rebase --continue && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D conflict-fixup ' @@ -456,7 +467,7 @@ test_expect_success 'commit message retained after conflict' ' git rebase --continue && test $base = $(git rev-parse HEAD^) && test 2 = $(git show | grep TWICE | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D conflict-squash ' @@ -481,7 +492,7 @@ test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messa grep "^# This is a combination of 3 commits\." && git cat-file commit HEAD@{3} | grep "^# This is a combination of 2 commits\." && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D squash-fixup ' @@ -494,7 +505,7 @@ test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' ' git rebase -i $base && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D skip-comments ' @@ -507,7 +518,7 @@ test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' ' git rebase -i $base && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && - git checkout to-be-rebased && + git checkout @{-1} && git branch -D skip-blank-lines ' @@ -515,7 +526,7 @@ test_expect_success 'squash works as expected' ' git checkout -b squash-works no-conflict-branch && one=$(git rev-parse HEAD~3) && set_fake_editor && - FAKE_LINES="1 squash 3 2" EXPECT_HEADER_COUNT=2 \ + FAKE_LINES="1 s 3 2" EXPECT_HEADER_COUNT=2 \ git rebase -i HEAD~3 && test $one = $(git rev-parse HEAD~2) ' @@ -648,7 +659,7 @@ test_expect_success 'rebase with a file named HEAD in worktree' ' ) && set_fake_editor && - FAKE_LINES="1 squash 2" git rebase -i to-be-rebased && + FAKE_LINES="1 squash 2" git rebase -i @{-1} && test "$(git show -s --pretty=format:%an)" = "Squashed Away" ' @@ -748,7 +759,7 @@ test_expect_success 'reword' ' git show HEAD^ | grep "D changed" && FAKE_LINES="reword 1 2 3 4" FAKE_COMMIT_MESSAGE="B changed" git rebase -i A && git show HEAD~3 | grep "B changed" && - FAKE_LINES="1 reword 2 3 4" FAKE_COMMIT_MESSAGE="C changed" git rebase -i A && + FAKE_LINES="1 r 2 pick 3 p 4" FAKE_COMMIT_MESSAGE="C changed" git rebase -i A && git show HEAD~2 | grep "C changed" ' @@ -774,7 +785,7 @@ test_expect_success 'rebase -i can copy notes over a fixup' ' git reset --hard n3 && git notes add -m"an earlier note" n2 && set_fake_editor && - GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 fixup 2" git rebase -i n1 && + GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 f 2" git rebase -i n1 && git notes show > output && test_cmp expect output ' @@ -1251,7 +1262,7 @@ rebase_setup_and_clean () { test_expect_success 'drop' ' rebase_setup_and_clean drop-test && set_fake_editor && - FAKE_LINES="1 drop 2 3 drop 4 5" git rebase -i --root && + FAKE_LINES="1 drop 2 3 d 4 5" git rebase -i --root && test E = $(git cat-file commit HEAD | sed -ne \$p) && test C = $(git cat-file commit HEAD^ | sed -ne \$p) && test A = $(git cat-file commit HEAD^^ | sed -ne \$p) diff --git a/t/t3406-rebase-message.sh b/t/t3406-rebase-message.sh index 0392e36d23..38bd876cab 100755 --- a/t/t3406-rebase-message.sh +++ b/t/t3406-rebase-message.sh @@ -77,11 +77,18 @@ test_expect_success 'rebase -n overrides config rebase.stat config' ' # "Does not point to a valid commit: invalid-ref" # # NEEDSWORK: This "grep" is fine in real non-C locales, but -# GETTEXT_POISON poisons the refname along with the enclosing +# GIT_TEST_GETTEXT_POISON poisons the refname along with the enclosing # error message. test_expect_success 'rebase --onto outputs the invalid ref' ' test_must_fail git rebase --onto invalid-ref HEAD HEAD 2>err && test_i18ngrep "invalid-ref" err ' +test_expect_success 'error out early upon -C<n> or --whitespace=<bad>' ' + test_must_fail git rebase -Cnot-a-number HEAD 2>err && + test_i18ngrep "numerical value" err && + test_must_fail git rebase --whitespace=bad HEAD 2>err && + test_i18ngrep "Invalid whitespace option" err +' + test_done diff --git a/t/t3408-rebase-multi-line.sh b/t/t3408-rebase-multi-line.sh index e7292f5b9b..d2bd7c17b0 100755 --- a/t/t3408-rebase-multi-line.sh +++ b/t/t3408-rebase-multi-line.sh @@ -52,7 +52,7 @@ test_expect_success rebase ' test_cmp expect actual ' -test_expect_success rebasep ' +test_expect_success REBASE_P rebasep ' git checkout side-merge && git rebase -p side && diff --git a/t/t3409-rebase-preserve-merges.sh b/t/t3409-rebase-preserve-merges.sh index 8c251c57a6..3b340f1ece 100755 --- a/t/t3409-rebase-preserve-merges.sh +++ b/t/t3409-rebase-preserve-merges.sh @@ -8,6 +8,11 @@ Run "git rebase -p" and check that merges are properly carried along ' . ./test-lib.sh +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + GIT_AUTHOR_EMAIL=bogus_email_address export GIT_AUTHOR_EMAIL diff --git a/t/t3410-rebase-preserve-dropped-merges.sh b/t/t3410-rebase-preserve-dropped-merges.sh index 6f73b95558..2e29866993 100755 --- a/t/t3410-rebase-preserve-dropped-merges.sh +++ b/t/t3410-rebase-preserve-dropped-merges.sh @@ -11,6 +11,11 @@ rewritten. ' . ./test-lib.sh +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + # set up two branches like this: # # A - B - C - D - E diff --git a/t/t3411-rebase-preserve-around-merges.sh b/t/t3411-rebase-preserve-around-merges.sh index dc81bf27eb..fb45e7bf7b 100755 --- a/t/t3411-rebase-preserve-around-merges.sh +++ b/t/t3411-rebase-preserve-around-merges.sh @@ -10,6 +10,11 @@ a merge to before the merge. ' . ./test-lib.sh +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + . "$TEST_DIRECTORY"/lib-rebase.sh set_fake_editor diff --git a/t/t3412-rebase-root.sh b/t/t3412-rebase-root.sh index 73a39f2923..21632a984e 100755 --- a/t/t3412-rebase-root.sh +++ b/t/t3412-rebase-root.sh @@ -86,14 +86,14 @@ test_expect_success 'pre-rebase got correct input (4)' ' test "z$(cat .git/PRE-REBASE-INPUT)" = z--root,work4 ' -test_expect_success 'rebase -i -p with linear history' ' +test_expect_success REBASE_P 'rebase -i -p with linear history' ' git checkout -b work5 other && git rebase -i -p --root --onto master && git log --pretty=tformat:"%s" > rebased5 && test_cmp expect rebased5 ' -test_expect_success 'pre-rebase got correct input (5)' ' +test_expect_success REBASE_P 'pre-rebase got correct input (5)' ' test "z$(cat .git/PRE-REBASE-INPUT)" = z--root, ' @@ -120,7 +120,7 @@ commit work6~4 1 EOF -test_expect_success 'rebase -i -p with merge' ' +test_expect_success REBASE_P 'rebase -i -p with merge' ' git checkout -b work6 other && git rebase -i -p --root --onto master && log_with_names work6 > rebased6 && @@ -155,7 +155,7 @@ commit work7~5 1 EOF -test_expect_success 'rebase -i -p with two roots' ' +test_expect_success REBASE_P 'rebase -i -p with two roots' ' git checkout -b work7 other && git rebase -i -p --root --onto master && log_with_names work7 > rebased7 && @@ -261,7 +261,7 @@ commit conflict3~6 1 EOF -test_expect_success 'rebase -i -p --root with conflict (first part)' ' +test_expect_success REBASE_P 'rebase -i -p --root with conflict (first part)' ' git checkout -b conflict3 other && test_must_fail git rebase -i -p --root --onto master && git ls-files -u | grep "B$" @@ -272,7 +272,7 @@ test_expect_success 'fix the conflict' ' git add B ' -test_expect_success 'rebase -i -p --root with conflict (second part)' ' +test_expect_success REBASE_P 'rebase -i -p --root with conflict (second part)' ' git rebase --continue && log_with_names conflict3 >out && test_cmp expect-conflict-p out diff --git a/t/t3414-rebase-preserve-onto.sh b/t/t3414-rebase-preserve-onto.sh index ee0a6cccfd..72e04b5386 100755 --- a/t/t3414-rebase-preserve-onto.sh +++ b/t/t3414-rebase-preserve-onto.sh @@ -10,6 +10,11 @@ aren'"'"'t on top of $ONTO, even if they are on top of $UPSTREAM. ' . ./test-lib.sh +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + . "$TEST_DIRECTORY"/lib-rebase.sh # Set up branches like this: diff --git a/t/t3417-rebase-whitespace-fix.sh b/t/t3417-rebase-whitespace-fix.sh index 1fb3e499b4..e85cdc7037 100755 --- a/t/t3417-rebase-whitespace-fix.sh +++ b/t/t3417-rebase-whitespace-fix.sh @@ -55,7 +55,7 @@ test_expect_success 'blank line at end of file; extend at end of file' ' git add file && git commit -m second && git rebase --whitespace=fix HEAD^^ && git diff --exit-code HEAD^:file expect-first && - test_cmp file expect-second + test_cmp expect-second file ' # prepare third revision of "file" @@ -82,7 +82,7 @@ test_expect_success 'two blanks line at end of file; extend at end of file' ' cp third file && git add file && git commit -m third && git rebase --whitespace=fix HEAD^^ && git diff --exit-code HEAD^:file expect-second && - test_cmp file expect-third + test_cmp expect-third file ' test_expect_success 'same, but do not remove trailing spaces' ' @@ -120,7 +120,7 @@ test_expect_success 'at beginning of file' ' done >> file && git commit -m more file && git rebase --whitespace=fix HEAD^^ && - test_cmp file expect-beginning + test_cmp expect-beginning file ' test_done diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh index 25099d715c..0210b2ac6f 100755 --- a/t/t3418-rebase-continue.sh +++ b/t/t3418-rebase-continue.sh @@ -106,7 +106,7 @@ test_expect_success 'rebase -i --continue handles merge strategy and options' ' test -f funny.was.run ' -test_expect_success 'rebase passes merge strategy options correctly' ' +test_expect_success REBASE_P 'rebase passes merge strategy options correctly' ' rm -fr .git/rebase-* && git reset --hard commit-new-file-F3-on-topic-branch && test_commit theirs-to-merge && @@ -177,6 +177,7 @@ test_expect_success 'setup rerere database' ' git checkout master && test_commit "commit-new-file-F3" F3 3 && test_config rerere.enabled true && + git update-ref refs/heads/topic commit-new-file-F3-on-topic-branch && test_must_fail git rebase -m master topic && echo "Resolved" >F2 && cp F2 expected-F2 && @@ -240,6 +241,17 @@ test_rerere_autoupdate test_rerere_autoupdate -m GIT_SEQUENCE_EDITOR=: && export GIT_SEQUENCE_EDITOR test_rerere_autoupdate -i -test_rerere_autoupdate --preserve-merges +test_have_prereq !REBASE_P || test_rerere_autoupdate --preserve-merges +unset GIT_SEQUENCE_EDITOR + +test_expect_success 'the todo command "break" works' ' + rm -f execed && + FAKE_LINES="break b exec_>execed" git rebase -i HEAD && + test_path_is_missing execed && + git rebase --continue && + test_path_is_missing execed && + git rebase --continue && + test_path_is_file execed +' test_done diff --git a/t/t3420-rebase-autostash.sh b/t/t3420-rebase-autostash.sh index 0c4eefec76..4c7494cc8f 100755 --- a/t/t3420-rebase-autostash.sh +++ b/t/t3420-rebase-autostash.sh @@ -351,4 +351,22 @@ test_expect_success 'autostash is saved on editor failure with conflict' ' test_cmp expected file0 ' +test_expect_success 'autostash with dirty submodules' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b with-submodule && + git submodule add ./ sub && + test_tick && + git commit -m add-submodule && + echo changed >sub/file0 && + git rebase -i --autostash HEAD +' + +test_expect_success 'branch is left alone when possible' ' + git checkout -b unchanged-branch && + echo changed >file0 && + git rebase --autostash unchanged-branch && + test changed = "$(cat file0)" && + test unchanged-branch = "$(git rev-parse --abbrev-ref HEAD)" +' + test_done diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index 99b2aac921..23ad4cff35 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -29,7 +29,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -43,7 +43,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -59,7 +59,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -73,7 +73,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p # f # / @@ -113,7 +113,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -128,7 +128,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -143,7 +143,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -158,7 +158,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p # a---b---c---j! # \ @@ -186,7 +186,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -201,7 +201,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -216,7 +216,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase success --rebase-merges # m @@ -256,7 +256,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -271,7 +271,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -286,7 +286,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -302,7 +302,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -317,7 +317,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase failure -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -331,7 +331,7 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -346,6 +346,6 @@ test_run_rebase () { test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_done diff --git a/t/t3425-rebase-topology-merges.sh b/t/t3425-rebase-topology-merges.sh index 846f85c27e..5f892e33d7 100755 --- a/t/t3425-rebase-topology-merges.sh +++ b/t/t3425-rebase-topology-merges.sh @@ -109,6 +109,11 @@ test_run_rebase success 'd e n o' '' test_run_rebase success 'd e n o' -m test_run_rebase success 'd n o e' -i +if ! test_have_prereq REBASE_P; then + skip_all='skipping git rebase -p tests, as asked for' + test_done +fi + test_expect_success "rebase -p is no-op in non-linear history" " reset_rebase && git rebase -p d w && diff --git a/t/t3430-rebase-merges.sh b/t/t3430-rebase-merges.sh index aa7bfc88ec..cc5646836f 100755 --- a/t/t3430-rebase-merges.sh +++ b/t/t3430-rebase-merges.sh @@ -396,4 +396,20 @@ test_expect_success 'with --autosquash and --exec' ' grep "G: +G" actual ' +test_expect_success '--continue after resolving conflicts after a merge' ' + git checkout -b already-has-g E && + git cherry-pick E..G && + test_commit H2 && + + git checkout -b conflicts-in-merge H && + test_commit H2 H2.t conflicts H2-conflict && + test_must_fail git rebase -r already-has-g && + grep conflicts H2.t && + echo resolved >H2.t && + git add -u && + git rebase --continue && + test_must_fail git rev-parse --verify HEAD^2 && + test_path_is_missing .git/MERGE_HEAD +' + test_done diff --git a/t/t3702-add-edit.sh b/t/t3702-add-edit.sh index c6af7f82b5..6c676645d8 100755 --- a/t/t3702-add-edit.sh +++ b/t/t3702-add-edit.sh @@ -110,10 +110,10 @@ test_expect_success 'add -e' ' cp second-part file && git add -e && test_cmp second-part file && - test_cmp orig-patch expected-patch && + test_cmp expected-patch orig-patch && git diff --cached >actual && grep -v index actual >out && - test_cmp out expected + test_cmp expected out ' diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 6450bc6698..cd216655b9 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -36,7 +36,7 @@ EOF test_expect_success 'parents of stash' ' test $(git rev-parse stash^) = $(git rev-parse HEAD) && git diff stash^2..stash > output && - test_cmp output expect + test_cmp expect output ' test_expect_success 'applying bogus stash does nothing' ' @@ -210,9 +210,9 @@ test_expect_success 'stash branch' ' test refs/heads/stashbranch = $(git symbolic-ref HEAD) && test $(git rev-parse HEAD) = $(git rev-parse master^) && git diff --cached > output && - test_cmp output expect && + test_cmp expect output && git diff > output && - test_cmp output expect1 && + test_cmp expect1 output && git add file && git commit -m alternate\ second && git diff master..stashbranch > output && @@ -710,7 +710,7 @@ test_expect_success 'stash where working directory contains "HEAD" file' ' git diff-index --cached --quiet HEAD && test "$(git rev-parse stash^)" = "$(git rev-parse HEAD)" && git diff stash^..stash > output && - test_cmp output expect + test_cmp expect output ' test_expect_success 'store called with invalid commit' ' diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index 597b0637d1..cc1c8a7bb2 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -142,7 +142,7 @@ test_expect_success 'stash save --include-untracked removed files' ' rm -f file && git stash save --include-untracked && echo 1 > expect && - test_cmp file expect + test_cmp expect file ' rm -f expect diff --git a/t/t4025-hunk-header.sh b/t/t4025-hunk-header.sh index fa44e78869..35578f2bb9 100755 --- a/t/t4025-hunk-header.sh +++ b/t/t4025-hunk-header.sh @@ -37,7 +37,7 @@ test_expect_success 'hunk header truncation with an overly long line' ' echo " A $N$N$N$N$N$N$N$N$N2" && echo " L $N$N$N$N$N$N$N$N$N1" ) >expected && - test_cmp actual expected + test_cmp expected actual ' diff --git a/t/t4052-stat-output.sh b/t/t4052-stat-output.sh index 6e2cf933f7..28c053849a 100755 --- a/t/t4052-stat-output.sh +++ b/t/t4052-stat-output.sh @@ -44,42 +44,50 @@ show --stat log -1 --stat EOF -while read cmd args +cat >expect.60 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +cat >expect.6030 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +cat >expect2.60 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +cat >expect2.6030 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + + ...aaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +while read expect cmd args do - cat >expect <<-'EOF' - ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + - EOF test_expect_success "$cmd --stat=width: a long name is given more room when the bar is short" ' git $cmd $args --stat=40 >output && grep " | " output >actual && - test_cmp expect actual + test_cmp $expect.60 actual ' test_expect_success "$cmd --stat-width=width with long name" ' git $cmd $args --stat-width=40 >output && grep " | " output >actual && - test_cmp expect actual + test_cmp $expect.60 actual ' - cat >expect <<-'EOF' - ...aaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + - EOF test_expect_success "$cmd --stat=...,name-width with long name" ' git $cmd $args --stat=60,30 >output && grep " | " output >actual && - test_cmp expect actual + test_cmp $expect.6030 actual ' test_expect_success "$cmd --stat-name-width with long name" ' git $cmd $args --stat-name-width=30 >output && grep " | " output >actual && - test_cmp expect actual + test_cmp $expect.6030 actual ' done <<\EOF -format-patch -1 --stdout -diff HEAD^ HEAD --stat -show --stat -log -1 --stat +expect2 format-patch --cover-letter -1 --stdout +expect diff HEAD^ HEAD --stat +expect show --stat +expect log -1 --stat EOF @@ -97,6 +105,16 @@ test_expect_success 'preparation for big change tests' ' cat >expect72 <<'EOF' abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +EOF +test_expect_success "format-patch --cover-letter ignores COLUMNS (big change)" ' + COLUMNS=200 git format-patch -1 --stdout --cover-letter >output && + grep " | " output >actual && + test_cmp expect72 actual +' + +cat >expect72 <<'EOF' + abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF cat >expect72-graph <<'EOF' | abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ diff --git a/t/t4053-diff-no-index.sh b/t/t4053-diff-no-index.sh index 453e6c35eb..6e0dd6f9e5 100755 --- a/t/t4053-diff-no-index.sh +++ b/t/t4053-diff-no-index.sh @@ -127,4 +127,14 @@ test_expect_success 'diff --no-index from repo subdir respects config (implicit) test_cmp expect actual.head ' +test_expect_success 'diff --no-index from repo subdir with absolute paths' ' + cat <<-EOF >expect && + 1 1 $(pwd)/non/git/{a => b} + EOF + test_expect_code 1 \ + git -C repo/sub diff --numstat \ + "$(pwd)/non/git/a" "$(pwd)/non/git/b" >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4117-apply-reject.sh b/t/t4117-apply-reject.sh index d80187de94..f7de6f077a 100755 --- a/t/t4117-apply-reject.sh +++ b/t/t4117-apply-reject.sh @@ -72,7 +72,7 @@ test_expect_success 'apply with --reject should fail but update the file' ' rm -f file1.rej file2.rej && test_must_fail git apply --reject patch.1 && - test_cmp file1 expected && + test_cmp expected file1 && cat file1.rej && test_path_is_missing file2.rej @@ -85,7 +85,7 @@ test_expect_success 'apply with --reject should fail but update the file' ' test_must_fail git apply --reject patch.2 >rejects && test_path_is_missing file1 && - test_cmp file2 expected && + test_cmp expected file2 && cat file2.rej && test_path_is_missing file1.rej @@ -99,7 +99,7 @@ test_expect_success 'the same test with --verbose' ' test_must_fail git apply --reject --verbose patch.2 >rejects && test_path_is_missing file1 && - test_cmp file2 expected && + test_cmp expected file2 && cat file2.rej && test_path_is_missing file1.rej diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index 7e32237a2a..ff51e9e789 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -313,9 +313,9 @@ test_expect_success 'applying beyond EOF requires one non-blank context line' ' { echo a; echo; } >one && cp one expect && test_must_fail git apply --whitespace=fix patch && - test_cmp one expect && + test_cmp expect one && test_must_fail git apply --ignore-space-change --whitespace=fix patch && - test_cmp one expect + test_cmp expect one ' test_expect_success 'tons of blanks at EOF should not apply' ' @@ -342,10 +342,10 @@ test_expect_success 'missing blank line at end with --whitespace=fix' ' cp one saved-one && test_must_fail git apply patch && git apply --whitespace=fix patch && - test_cmp one expect && + test_cmp expect one && mv saved-one one && git apply --ignore-space-change --whitespace=fix patch && - test_cmp one expect + test_cmp expect one ' test_expect_success 'two missing blank lines at end with --whitespace=fix' ' @@ -360,11 +360,11 @@ test_expect_success 'two missing blank lines at end with --whitespace=fix' ' cp no-blank-lines one && test_must_fail git apply patch && git apply --whitespace=fix patch && - test_cmp one expect && + test_cmp expect one && mv no-blank-lines one && test_must_fail git apply patch && git apply --ignore-space-change --whitespace=fix patch && - test_cmp one expect + test_cmp expect one ' test_expect_success 'missing blank line at end, insert before end, --whitespace=fix' ' @@ -376,7 +376,7 @@ test_expect_success 'missing blank line at end, insert before end, --whitespace= echo a >one && test_must_fail git apply patch && git apply --whitespace=fix patch && - test_cmp one expect + test_cmp expect one ' test_expect_success 'shrink file with tons of missing blanks at end of file' ' @@ -392,10 +392,10 @@ test_expect_success 'shrink file with tons of missing blanks at end of file' ' cp no-blank-lines one && test_must_fail git apply patch && git apply --whitespace=fix patch && - test_cmp one expect && + test_cmp expect one && mv no-blank-lines one && git apply --ignore-space-change --whitespace=fix patch && - test_cmp one expect + test_cmp expect one ' test_expect_success 'missing blanks at EOF must only match blank lines' ' @@ -427,7 +427,7 @@ test_expect_success 'missing blank line should match context line with spaces' ' git add one && git apply --whitespace=fix patch && - test_cmp one expect + test_cmp expect one ' sed -e's/Z//' >one <<EOF @@ -447,7 +447,7 @@ test_expect_success 'same, but with the --ignore-space-option' ' git checkout-index -f one && git apply --ignore-space-change --whitespace=fix patch && - test_cmp one expect + test_cmp expect one ' test_expect_success 'same, but with CR-LF line endings && cr-at-eol set' ' @@ -464,7 +464,7 @@ test_expect_success 'same, but with CR-LF line endings && cr-at-eol set' ' mv save-one one && git apply --ignore-space-change --whitespace=fix patch && - test_cmp one expect + test_cmp expect one ' test_expect_success 'CR-LF line endings && add line && text=auto' ' @@ -478,7 +478,7 @@ test_expect_success 'CR-LF line endings && add line && text=auto' ' mv save-one one && echo "one text=auto" >.gitattributes && git apply patch && - test_cmp one expect + test_cmp expect one ' test_expect_success 'CR-LF line endings && change line && text=auto' ' @@ -491,7 +491,7 @@ test_expect_success 'CR-LF line endings && change line && text=auto' ' mv save-one one && echo "one text=auto" >.gitattributes && git apply patch && - test_cmp one expect + test_cmp expect one ' test_expect_success 'LF in repo, CRLF in worktree && change line && text=auto' ' @@ -503,7 +503,7 @@ test_expect_success 'LF in repo, CRLF in worktree && change line && text=auto' ' echo "one text=auto" >.gitattributes && git -c core.eol=CRLF apply patch && printf "b\r\n" >expect && - test_cmp one expect + test_cmp expect one ' test_expect_success 'whitespace=fix to expand' ' diff --git a/t/t4136-apply-check.sh b/t/t4136-apply-check.sh index 6d92872318..4c3f264a63 100755 --- a/t/t4136-apply-check.sh +++ b/t/t4136-apply-check.sh @@ -29,6 +29,18 @@ test_expect_success 'apply exits non-zero with no-op patch' ' test_must_fail git apply --check input ' +test_expect_success '`apply --recount` allows no-op patch' ' + echo 1 >1 && + git apply --recount --check <<-\EOF + diff --get a/1 b/1 + index 6696ea4..606eddd 100644 + --- a/1 + +++ b/1 + @@ -1,1 +1,1 @@ + 1 + EOF +' + test_expect_success 'invalid combination: create and copy' ' test_must_fail git apply --check - <<-\EOF diff --git a/1 b/2 diff --git a/t/t4138-apply-ws-expansion.sh b/t/t4138-apply-ws-expansion.sh index 0ffe33fbef..3b636a63a3 100755 --- a/t/t4138-apply-ws-expansion.sh +++ b/t/t4138-apply-ws-expansion.sh @@ -114,7 +114,7 @@ for t in 1 2 3 4 do test_expect_success 'apply with ws expansion (t=$t)' ' git apply patch$t.patch && - test_cmp test-$t expect-$t + test_cmp expect-$t test-$t ' done diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 153a506151..819c24d10e 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -1703,4 +1703,8 @@ test_expect_success 'log --source paints symmetric ranges' ' test_cmp expect actual ' +test_expect_success '--exclude-promisor-objects does not BUG-crash' ' + test_must_fail git log --exclude-promisor-objects source-a +' + test_done diff --git a/t/t4214-log-graph-octopus.sh b/t/t4214-log-graph-octopus.sh new file mode 100755 index 0000000000..dab96c89aa --- /dev/null +++ b/t/t4214-log-graph-octopus.sh @@ -0,0 +1,102 @@ +#!/bin/sh + +test_description='git log --graph of skewed left octopus merge.' + +. ./test-lib.sh + +test_expect_success 'set up merge history' ' + cat >expect.uncolored <<-\EOF && + * left + | *---. octopus-merge + | |\ \ \ + |/ / / / + | | | * 4 + | | * | 3 + | | |/ + | * | 2 + | |/ + * | 1 + |/ + * initial + EOF + cat >expect.colors <<-\EOF && + * left + <RED>|<RESET> *<BLUE>-<RESET><BLUE>-<RESET><MAGENTA>-<RESET><MAGENTA>.<RESET> octopus-merge + <RED>|<RESET> <RED>|<RESET><YELLOW>\<RESET> <BLUE>\<RESET> <MAGENTA>\<RESET> + <RED>|<RESET><RED>/<RESET> <YELLOW>/<RESET> <BLUE>/<RESET> <MAGENTA>/<RESET> + <RED>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 4 + <RED>|<RESET> <YELLOW>|<RESET> * <MAGENTA>|<RESET> 3 + <RED>|<RESET> <YELLOW>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> + <RED>|<RESET> * <MAGENTA>|<RESET> 2 + <RED>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> + * <MAGENTA>|<RESET> 1 + <MAGENTA>|<RESET><MAGENTA>/<RESET> + * initial + EOF + test_commit initial && + for i in 1 2 3 4 ; do + git checkout master -b $i || return $? + # Make tag name different from branch name, to avoid + # ambiguity error when calling checkout. + test_commit $i $i $i tag$i || return $? + done && + git checkout 1 -b merge && + test_tick && + git merge -m octopus-merge 1 2 3 4 && + git checkout 1 -b L && + test_commit left +' + +test_expect_success 'log --graph with tricky octopus merge with colors' ' + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + git log --color=always --graph --date-order --pretty=tformat:%s --all >actual.colors.raw && + test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && + test_cmp expect.colors actual.colors +' + +test_expect_success 'log --graph with tricky octopus merge, no color' ' + git log --color=never --graph --date-order --pretty=tformat:%s --all >actual.raw && + sed "s/ *\$//" actual.raw >actual && + test_cmp expect.uncolored actual +' + +# Repeat the previous two tests with "normal" octopus merge (i.e., +# without the first parent skewing to the "left" branch column). + +test_expect_success 'log --graph with normal octopus merge, no color' ' + cat >expect.uncolored <<-\EOF && + *---. octopus-merge + |\ \ \ + | | | * 4 + | | * | 3 + | | |/ + | * | 2 + | |/ + * | 1 + |/ + * initial + EOF + git log --color=never --graph --date-order --pretty=tformat:%s merge >actual.raw && + sed "s/ *\$//" actual.raw >actual && + test_cmp expect.uncolored actual +' + +test_expect_success 'log --graph with normal octopus merge with colors' ' + cat >expect.colors <<-\EOF && + *<YELLOW>-<RESET><YELLOW>-<RESET><BLUE>-<RESET><BLUE>.<RESET> octopus-merge + <RED>|<RESET><GREEN>\<RESET> <YELLOW>\<RESET> <BLUE>\<RESET> + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> * 4 + <RED>|<RESET> <GREEN>|<RESET> * <BLUE>|<RESET> 3 + <RED>|<RESET> <GREEN>|<RESET> <BLUE>|<RESET><BLUE>/<RESET> + <RED>|<RESET> * <BLUE>|<RESET> 2 + <RED>|<RESET> <BLUE>|<RESET><BLUE>/<RESET> + * <BLUE>|<RESET> 1 + <BLUE>|<RESET><BLUE>/<RESET> + * initial + EOF + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + git log --color=always --graph --date-order --pretty=tformat:%s merge >actual.colors.raw && + test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && + test_cmp expect.colors actual.colors +' +test_done diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 2a97b27b0a..602bfd9574 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -206,6 +206,12 @@ test_expect_success 'git archive with --output, override inferred format' ' test_cmp_bin b.tar d4.zip ' +test_expect_success GZIP 'git archive with --output and --remote creates .tgz' ' + git archive --output=d5.tgz --remote=. HEAD && + gzip -d -c <d5.tgz >d5.tar && + test_cmp_bin b.tar d5.tar +' + test_expect_success 'git archive --list outside of a git repo' ' nongit git archive --list ' diff --git a/t/t5003-archive-zip.sh b/t/t5003-archive-zip.sh index 55c7870997..106eddbd85 100755 --- a/t/t5003-archive-zip.sh +++ b/t/t5003-archive-zip.sh @@ -158,11 +158,16 @@ test_expect_success 'git archive --format=zip with --output' \ 'git archive --format=zip --output=d2.zip HEAD && test_cmp_bin d.zip d2.zip' -test_expect_success 'git archive with --output, inferring format' ' +test_expect_success 'git archive with --output, inferring format (local)' ' git archive --output=d3.zip HEAD && test_cmp_bin d.zip d3.zip ' +test_expect_success 'git archive with --output, inferring format (remote)' ' + git archive --remote=. --output=d4.zip HEAD && + test_cmp_bin d.zip d4.zip +' + test_expect_success \ 'git archive --format=zip with prefix' \ 'git archive --format=zip --prefix=prefix/ HEAD >e.zip' diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 6c620cd540..410a09b0dd 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -468,29 +468,32 @@ test_expect_success 'pack-objects in too-many-packs mode' ' git fsck ' -# -# WARNING! -# -# The following test is destructive. Please keep the next -# two tests at the end of this file. -# - -test_expect_success \ - 'fake a SHA1 hash collision' \ - 'long_a=$(git hash-object a | sed -e "s!^..!&/!") && - long_b=$(git hash-object b | sed -e "s!^..!&/!") && - test -f .git/objects/$long_b && - cp -f .git/objects/$long_a \ - .git/objects/$long_b' +test_expect_success 'setup: fake a SHA1 hash collision' ' + git init corrupt && + ( + cd corrupt && + long_a=$(git hash-object -w ../a | sed -e "s!^..!&/!") && + long_b=$(git hash-object -w ../b | sed -e "s!^..!&/!") && + test -f .git/objects/$long_b && + cp -f .git/objects/$long_a \ + .git/objects/$long_b + ) +' -test_expect_success \ - 'make sure index-pack detects the SHA1 collision' \ - 'test_must_fail git index-pack -o bad.idx test-3.pack 2>msg && - test_i18ngrep "SHA1 COLLISION FOUND" msg' +test_expect_success 'make sure index-pack detects the SHA1 collision' ' + ( + cd corrupt && + test_must_fail git index-pack -o ../bad.idx ../test-3.pack 2>msg && + test_i18ngrep "SHA1 COLLISION FOUND" msg + ) +' -test_expect_success \ - 'make sure index-pack detects the SHA1 collision (large blobs)' \ - 'test_must_fail git -c core.bigfilethreshold=1 index-pack -o bad.idx test-3.pack 2>msg && - test_i18ngrep "SHA1 COLLISION FOUND" msg' +test_expect_success 'make sure index-pack detects the SHA1 collision (large blobs)' ' + ( + cd corrupt && + test_must_fail git -c core.bigfilethreshold=1 index-pack -o ../bad.idx ../test-3.pack 2>msg && + test_i18ngrep "SHA1 COLLISION FOUND" msg + ) +' test_done diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index 1be3459c5b..82d7f7f6a5 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -191,6 +191,7 @@ test_expect_success 'pack-objects respects --honor-pack-keep (local bitmapped pa test_expect_success 'pack-objects respects --local (non-local bitmapped pack)' ' mv .git/objects/pack/$packbitmap.* alt.git/objects/pack/ && + rm -f .git/objects/pack/multi-pack-index && test_when_finished "mv alt.git/objects/pack/$packbitmap.* .git/objects/pack/" && echo HEAD | git pack-objects --local --stdout --revs >3b.pack && git index-pack 3b.pack && diff --git a/t/t5317-pack-objects-filter-objects.sh b/t/t5317-pack-objects-filter-objects.sh index 6710c8bc8c..24541ea137 100755 --- a/t/t5317-pack-objects-filter-objects.sh +++ b/t/t5317-pack-objects-filter-objects.sh @@ -21,17 +21,21 @@ test_expect_success 'setup r1' ' test_expect_success 'verify blob count in normal packfile' ' git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \ - | awk -f print_2.awk \ - | sort >expected && + >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r1 pack-objects --rev --stdout >all.pack <<-EOF && HEAD EOF git -C r1 index-pack ../all.pack && - git -C r1 verify-pack -v ../all.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r1 verify-pack -v ../all.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify blob:none packfile has no blobs' ' @@ -39,24 +43,69 @@ test_expect_success 'verify blob:none packfile has no blobs' ' HEAD EOF git -C r1 index-pack ../filter.pack && - git -C r1 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && + + git -C r1 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + nr=$(wc -l <observed) && test 0 -eq $nr ' test_expect_success 'verify normal and blob:none packfiles have same commits/trees' ' - git -C r1 verify-pack -v ../all.pack \ - | grep -E "commit|tree" \ - | awk -f print_1.awk \ - | sort >expected && - git -C r1 verify-pack -v ../filter.pack \ - | grep -E "commit|tree" \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + git -C r1 verify-pack -v ../all.pack >verify_result && + grep -E "commit|tree" verify_result | + awk -f print_1.awk | + sort >expected && + + git -C r1 verify-pack -v ../filter.pack >verify_result && + grep -E "commit|tree" verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed +' + +test_expect_success 'get an error for missing tree object' ' + git init r5 && + echo foo >r5/foo && + git -C r5 add foo && + git -C r5 commit -m "foo" && + del=$(git -C r5 rev-parse HEAD^{tree} | sed "s|..|&/|") && + rm r5/.git/objects/$del && + test_must_fail git -C r5 pack-objects --rev --stdout 2>bad_tree <<-EOF && + HEAD + EOF + grep "bad tree object" bad_tree +' + +test_expect_success 'setup for tests of tree:0' ' + mkdir r1/subtree && + echo "This is a file in a subtree" >r1/subtree/file && + git -C r1 add subtree/file && + git -C r1 commit -m subtree +' + +test_expect_success 'verify tree:0 packfile has no blobs or trees' ' + git -C r1 pack-objects --rev --stdout --filter=tree:0 >commitsonly.pack <<-EOF && + HEAD + EOF + git -C r1 index-pack ../commitsonly.pack && + git -C r1 verify-pack -v ../commitsonly.pack >objs && + ! grep -E "tree|blob" objs +' + +test_expect_success 'grab tree directly when using tree:0' ' + # We should get the tree specified directly but not its blobs or subtrees. + git -C r1 pack-objects --rev --stdout --filter=tree:0 >commitsonly.pack <<-EOF && + HEAD: + EOF + git -C r1 index-pack ../commitsonly.pack && + git -C r1 verify-pack -v ../commitsonly.pack >objs && + awk "/tree|blob/{print \$1}" objs >trees_and_blobs && + git -C r1 rev-parse HEAD: >expected && + test_cmp expected trees_and_blobs ' # Test blob:limit=<n>[kmg] filter. @@ -75,18 +124,21 @@ test_expect_success 'setup r2' ' ' test_expect_success 'verify blob count in normal packfile' ' - git -C r2 ls-files -s large.1000 large.10000 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r2 ls-files -s large.1000 large.10000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r2 pack-objects --rev --stdout >all.pack <<-EOF && HEAD EOF git -C r2 index-pack ../all.pack && - git -C r2 verify-pack -v ../all.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r2 verify-pack -v ../all.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify blob:limit=500 omits all blobs' ' @@ -94,10 +146,12 @@ test_expect_success 'verify blob:limit=500 omits all blobs' ' HEAD EOF git -C r2 index-pack ../filter.pack && - git -C r2 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && + + git -C r2 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + nr=$(wc -l <observed) && test 0 -eq $nr ' @@ -107,100 +161,119 @@ test_expect_success 'verify blob:limit=1000' ' HEAD EOF git -C r2 index-pack ../filter.pack && - git -C r2 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && + + git -C r2 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + nr=$(wc -l <observed) && test 0 -eq $nr ' test_expect_success 'verify blob:limit=1001' ' - git -C r2 ls-files -s large.1000 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r2 ls-files -s large.1000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=1001 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && - git -C r2 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r2 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify blob:limit=10001' ' - git -C r2 ls-files -s large.1000 large.10000 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r2 ls-files -s large.1000 large.10000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=10001 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && - git -C r2 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r2 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify blob:limit=1k' ' - git -C r2 ls-files -s large.1000 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r2 ls-files -s large.1000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=1k >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && - git -C r2 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r2 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify explicitly specifying oversized blob in input' ' - git -C r2 ls-files -s large.1000 large.10000 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r2 ls-files -s large.1000 large.10000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=1k >filter.pack <<-EOF && HEAD $(git -C r2 rev-parse HEAD:large.10000) EOF git -C r2 index-pack ../filter.pack && - git -C r2 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r2 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify blob:limit=1m' ' - git -C r2 ls-files -s large.1000 large.10000 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r2 ls-files -s large.1000 large.10000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=1m >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && - git -C r2 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r2 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify normal and blob:limit packfiles have same commits/trees' ' - git -C r2 verify-pack -v ../all.pack \ - | grep -E "commit|tree" \ - | awk -f print_1.awk \ - | sort >expected && - git -C r2 verify-pack -v ../filter.pack \ - | grep -E "commit|tree" \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + git -C r2 verify-pack -v ../all.pack >verify_result && + grep -E "commit|tree" verify_result | + awk -f print_1.awk | + sort >expected && + + git -C r2 verify-pack -v ../filter.pack >verify_result && + grep -E "commit|tree" verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' # Test sparse:path=<path> filter. @@ -225,71 +298,85 @@ test_expect_success 'setup r3' ' test_expect_success 'verify blob count in normal packfile' ' git -C r3 ls-files -s sparse1 sparse2 dir1/sparse1 dir1/sparse2 \ - | awk -f print_2.awk \ - | sort >expected && + >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r3 pack-objects --rev --stdout >all.pack <<-EOF && HEAD EOF git -C r3 index-pack ../all.pack && - git -C r3 verify-pack -v ../all.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r3 verify-pack -v ../all.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify sparse:path=pattern1' ' - git -C r3 ls-files -s dir1/sparse1 dir1/sparse2 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r3 ls-files -s dir1/sparse1 dir1/sparse2 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r3 pack-objects --rev --stdout --filter=sparse:path=../pattern1 >filter.pack <<-EOF && HEAD EOF git -C r3 index-pack ../filter.pack && - git -C r3 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r3 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify normal and sparse:path=pattern1 packfiles have same commits/trees' ' - git -C r3 verify-pack -v ../all.pack \ - | grep -E "commit|tree" \ - | awk -f print_1.awk \ - | sort >expected && - git -C r3 verify-pack -v ../filter.pack \ - | grep -E "commit|tree" \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + git -C r3 verify-pack -v ../all.pack >verify_result && + grep -E "commit|tree" verify_result | + awk -f print_1.awk | + sort >expected && + + git -C r3 verify-pack -v ../filter.pack >verify_result && + grep -E "commit|tree" verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify sparse:path=pattern2' ' - git -C r3 ls-files -s sparse1 dir1/sparse1 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r3 ls-files -s sparse1 dir1/sparse1 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r3 pack-objects --rev --stdout --filter=sparse:path=../pattern2 >filter.pack <<-EOF && HEAD EOF git -C r3 index-pack ../filter.pack && - git -C r3 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r3 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify normal and sparse:path=pattern2 packfiles have same commits/trees' ' - git -C r3 verify-pack -v ../all.pack \ - | grep -E "commit|tree" \ - | awk -f print_1.awk \ - | sort >expected && - git -C r3 verify-pack -v ../filter.pack \ - | grep -E "commit|tree" \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + git -C r3 verify-pack -v ../all.pack >verify_result && + grep -E "commit|tree" verify_result | + awk -f print_1.awk | + sort >expected && + + git -C r3 verify-pack -v ../filter.pack >verify_result && + grep -E "commit|tree" verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' # Test sparse:oid=<oid-ish> filter. @@ -313,48 +400,58 @@ test_expect_success 'setup r4' ' test_expect_success 'verify blob count in normal packfile' ' git -C r4 ls-files -s pattern sparse1 sparse2 dir1/sparse1 dir1/sparse2 \ - | awk -f print_2.awk \ - | sort >expected && + >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r4 pack-objects --rev --stdout >all.pack <<-EOF && HEAD EOF git -C r4 index-pack ../all.pack && - git -C r4 verify-pack -v ../all.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r4 verify-pack -v ../all.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify sparse:oid=OID' ' - git -C r4 ls-files -s dir1/sparse1 dir1/sparse2 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r4 ls-files -s dir1/sparse1 dir1/sparse2 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + oid=$(git -C r4 ls-files -s pattern | awk -f print_2.awk) && git -C r4 pack-objects --rev --stdout --filter=sparse:oid=$oid >filter.pack <<-EOF && HEAD EOF git -C r4 index-pack ../filter.pack && - git -C r4 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r4 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify sparse:oid=oid-ish' ' - git -C r4 ls-files -s dir1/sparse1 dir1/sparse2 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r4 ls-files -s dir1/sparse1 dir1/sparse2 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + git -C r4 pack-objects --rev --stdout --filter=sparse:oid=master:pattern >filter.pack <<-EOF && HEAD EOF git -C r4 index-pack ../filter.pack && - git -C r4 verify-pack -v ../filter.pack \ - | grep blob \ - | awk -f print_1.awk \ - | sort >observed && - test_cmp observed expected + + git -C r4 verify-pack -v ../filter.pack >verify_result && + grep blob verify_result | + awk -f print_1.awk | + sort >observed && + + test_cmp expected observed ' # Delete some loose objects and use pack-objects, but WITHOUT any filtering. @@ -362,8 +459,10 @@ test_expect_success 'verify sparse:oid=oid-ish' ' test_expect_success 'setup r1 - delete loose blobs' ' git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \ - | awk -f print_2.awk \ - | sort >expected && + >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + for id in `cat expected | sed "s|..|&/|"` do rm r1/.git/objects/$id diff --git a/t/t5318-commit-graph.sh b/t/t5318-commit-graph.sh index 0c500f7ca2..5fe21db99f 100755 --- a/t/t5318-commit-graph.sh +++ b/t/t5318-commit-graph.sh @@ -8,7 +8,8 @@ test_expect_success 'setup full repo' ' cd "$TRASH_DIRECTORY/full" && git init && git config core.commitGraph true && - objdir=".git/objects" + objdir=".git/objects" && + test_oid_init ' test_expect_success 'verify graph with no graph file' ' @@ -35,7 +36,7 @@ test_expect_success 'create commits and repack' ' graph_git_two_modes() { git -c core.commitGraph=true $1 >output git -c core.commitGraph=false $1 >expect - test_cmp output expect + test_cmp expect output } graph_git_behavior() { @@ -259,6 +260,66 @@ test_expect_success 'check that gc computes commit-graph' ' test_cmp_bin commit-graph-after-gc $objdir/info/commit-graph ' +test_expect_success 'replace-objects invalidates commit-graph' ' + cd "$TRASH_DIRECTORY" && + test_when_finished rm -rf replace && + git clone full replace && + ( + cd replace && + git commit-graph write --reachable && + test_path_is_file .git/objects/info/commit-graph && + git replace HEAD~1 HEAD~2 && + git -c core.commitGraph=false log >expect && + git -c core.commitGraph=true log >actual && + test_cmp expect actual && + git commit-graph write --reachable && + git -c core.commitGraph=false --no-replace-objects log >expect && + git -c core.commitGraph=true --no-replace-objects log >actual && + test_cmp expect actual && + rm -rf .git/objects/info/commit-graph && + git commit-graph write --reachable && + test_path_is_file .git/objects/info/commit-graph + ) +' + +test_expect_success 'commit grafts invalidate commit-graph' ' + cd "$TRASH_DIRECTORY" && + test_when_finished rm -rf graft && + git clone full graft && + ( + cd graft && + git commit-graph write --reachable && + test_path_is_file .git/objects/info/commit-graph && + H1=$(git rev-parse --verify HEAD~1) && + H3=$(git rev-parse --verify HEAD~3) && + echo "$H1 $H3" >.git/info/grafts && + git -c core.commitGraph=false log >expect && + git -c core.commitGraph=true log >actual && + test_cmp expect actual && + git commit-graph write --reachable && + git -c core.commitGraph=false --no-replace-objects log >expect && + git -c core.commitGraph=true --no-replace-objects log >actual && + test_cmp expect actual && + rm -rf .git/objects/info/commit-graph && + git commit-graph write --reachable && + test_path_is_missing .git/objects/info/commit-graph + ) +' + +test_expect_success 'replace-objects invalidates commit-graph' ' + cd "$TRASH_DIRECTORY" && + test_when_finished rm -rf shallow && + git clone --depth 2 "file://$TRASH_DIRECTORY/full" shallow && + ( + cd shallow && + git commit-graph write --reachable && + test_path_is_missing .git/objects/info/commit-graph && + git fetch origin --unshallow && + git commit-graph write --reachable && + test_path_is_file .git/objects/info/commit-graph + ) +' + # the verify tests below expect the commit-graph to contain # exactly the commits reachable from the commits/8 branch. # If the file changes the set of commits in the list, then the @@ -273,7 +334,7 @@ test_expect_success 'git commit-graph verify' ' NUM_COMMITS=9 NUM_OCTOPUS_EDGES=2 -HASH_LEN=20 +HASH_LEN="$(test_oid rawsz)" GRAPH_BYTE_VERSION=4 GRAPH_BYTE_HASH=5 GRAPH_BYTE_CHUNK_COUNT=6 diff --git a/t/t5319-multi-pack-index.sh b/t/t5319-multi-pack-index.sh index 6f56b38674..70926b5bc0 100755 --- a/t/t5319-multi-pack-index.sh +++ b/t/t5319-multi-pack-index.sh @@ -150,9 +150,128 @@ test_expect_success 'write midx with twelve packs' ' compare_results_with_midx "twelve packs" +test_expect_success 'verify multi-pack-index success' ' + git multi-pack-index verify --object-dir=$objdir +' + +# usage: corrupt_midx_and_verify <pos> <data> <objdir> <string> +corrupt_midx_and_verify() { + POS=$1 && + DATA="${2:-\0}" && + OBJDIR=$3 && + GREPSTR="$4" && + COMMAND="$5" && + if test -z "$COMMAND" + then + COMMAND="git multi-pack-index verify --object-dir=$OBJDIR" + fi && + FILE=$OBJDIR/pack/multi-pack-index && + chmod a+w $FILE && + test_when_finished mv midx-backup $FILE && + cp $FILE midx-backup && + printf "$DATA" | dd of="$FILE" bs=1 seek="$POS" conv=notrunc && + test_must_fail $COMMAND 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "$GREPSTR" err +} + +test_expect_success 'verify bad signature' ' + corrupt_midx_and_verify 0 "\00" $objdir \ + "multi-pack-index signature" +' + +HASH_LEN=20 +NUM_OBJECTS=74 +MIDX_BYTE_VERSION=4 +MIDX_BYTE_OID_VERSION=5 +MIDX_BYTE_CHUNK_COUNT=6 +MIDX_HEADER_SIZE=12 +MIDX_BYTE_CHUNK_ID=$MIDX_HEADER_SIZE +MIDX_BYTE_CHUNK_OFFSET=$(($MIDX_HEADER_SIZE + 4)) +MIDX_NUM_CHUNKS=5 +MIDX_CHUNK_LOOKUP_WIDTH=12 +MIDX_OFFSET_PACKNAMES=$(($MIDX_HEADER_SIZE + \ + $MIDX_NUM_CHUNKS * $MIDX_CHUNK_LOOKUP_WIDTH)) +MIDX_BYTE_PACKNAME_ORDER=$(($MIDX_OFFSET_PACKNAMES + 2)) +MIDX_OFFSET_OID_FANOUT=$(($MIDX_OFFSET_PACKNAMES + 652)) +MIDX_OID_FANOUT_WIDTH=4 +MIDX_BYTE_OID_FANOUT_ORDER=$((MIDX_OFFSET_OID_FANOUT + 250 * $MIDX_OID_FANOUT_WIDTH + 1)) +MIDX_OFFSET_OID_LOOKUP=$(($MIDX_OFFSET_OID_FANOUT + 256 * $MIDX_OID_FANOUT_WIDTH)) +MIDX_BYTE_OID_LOOKUP=$(($MIDX_OFFSET_OID_LOOKUP + 16 * $HASH_LEN)) +MIDX_OFFSET_OBJECT_OFFSETS=$(($MIDX_OFFSET_OID_LOOKUP + $NUM_OBJECTS * $HASH_LEN)) +MIDX_OFFSET_WIDTH=8 +MIDX_BYTE_PACK_INT_ID=$(($MIDX_OFFSET_OBJECT_OFFSETS + 16 * $MIDX_OFFSET_WIDTH + 2)) +MIDX_BYTE_OFFSET=$(($MIDX_OFFSET_OBJECT_OFFSETS + 16 * $MIDX_OFFSET_WIDTH + 6)) + +test_expect_success 'verify bad version' ' + corrupt_midx_and_verify $MIDX_BYTE_VERSION "\00" $objdir \ + "multi-pack-index version" +' + +test_expect_success 'verify bad OID version' ' + corrupt_midx_and_verify $MIDX_BYTE_OID_VERSION "\02" $objdir \ + "hash version" +' + +test_expect_success 'verify truncated chunk count' ' + corrupt_midx_and_verify $MIDX_BYTE_CHUNK_COUNT "\01" $objdir \ + "missing required" +' + +test_expect_success 'verify extended chunk count' ' + corrupt_midx_and_verify $MIDX_BYTE_CHUNK_COUNT "\07" $objdir \ + "terminating multi-pack-index chunk id appears earlier than expected" +' + +test_expect_success 'verify missing required chunk' ' + corrupt_midx_and_verify $MIDX_BYTE_CHUNK_ID "\01" $objdir \ + "missing required" +' + +test_expect_success 'verify invalid chunk offset' ' + corrupt_midx_and_verify $MIDX_BYTE_CHUNK_OFFSET "\01" $objdir \ + "invalid chunk offset (too large)" +' + +test_expect_success 'verify packnames out of order' ' + corrupt_midx_and_verify $MIDX_BYTE_PACKNAME_ORDER "z" $objdir \ + "pack names out of order" +' + +test_expect_success 'verify packnames out of order' ' + corrupt_midx_and_verify $MIDX_BYTE_PACKNAME_ORDER "a" $objdir \ + "failed to load pack" +' + +test_expect_success 'verify oid fanout out of order' ' + corrupt_midx_and_verify $MIDX_BYTE_OID_FANOUT_ORDER "\01" $objdir \ + "oid fanout out of order" +' + +test_expect_success 'verify oid lookup out of order' ' + corrupt_midx_and_verify $MIDX_BYTE_OID_LOOKUP "\00" $objdir \ + "oid lookup out of order" +' + +test_expect_success 'verify incorrect pack-int-id' ' + corrupt_midx_and_verify $MIDX_BYTE_PACK_INT_ID "\07" $objdir \ + "bad pack-int-id" +' + +test_expect_success 'verify incorrect offset' ' + corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\07" $objdir \ + "incorrect object offset" +' + +test_expect_success 'git-fsck incorrect offset' ' + corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\07" $objdir \ + "incorrect object offset" \ + "git -c core.multipackindex=true fsck" +' + test_expect_success 'repack removes multi-pack-index' ' test_path_is_file $objdir/pack/multi-pack-index && - git repack -adf && + GIT_TEST_MULTI_PACK_INDEX=0 git repack -adf && test_path_is_missing $objdir/pack/multi-pack-index ' @@ -187,7 +306,6 @@ test_expect_success 'multi-pack-index in an alternate' ' compare_results_with_midx "with alternate (remote midx)" - # usage: corrupt_data <file> <pos> [<data>] corrupt_data () { file=$1 @@ -214,4 +332,20 @@ test_expect_success 'force some 64-bit offsets with pack-objects' ' midx_read_expect 1 63 5 objects64 " large-offsets" ' +test_expect_success 'verify multi-pack-index with 64-bit offsets' ' + git multi-pack-index verify --object-dir=objects64 +' + +NUM_OBJECTS=63 +MIDX_OFFSET_OID_FANOUT=$((MIDX_OFFSET_PACKNAMES + 54)) +MIDX_OFFSET_OID_LOOKUP=$((MIDX_OFFSET_OID_FANOUT + 256 * $MIDX_OID_FANOUT_WIDTH)) +MIDX_OFFSET_OBJECT_OFFSETS=$(($MIDX_OFFSET_OID_LOOKUP + $NUM_OBJECTS * $HASH_LEN)) +MIDX_OFFSET_LARGE_OFFSETS=$(($MIDX_OFFSET_OBJECT_OFFSETS + $NUM_OBJECTS * $MIDX_OFFSET_WIDTH)) +MIDX_BYTE_LARGE_OFFSET=$(($MIDX_OFFSET_LARGE_OFFSETS + 3)) + +test_expect_success 'verify incorrect 64-bit offset' ' + corrupt_midx_and_verify $MIDX_BYTE_LARGE_OFFSET "\07" objects64 \ + "incorrect object offset" +' + test_done diff --git a/t/t5321-pack-large-objects.sh b/t/t5321-pack-large-objects.sh new file mode 100755 index 0000000000..a75eab87d3 --- /dev/null +++ b/t/t5321-pack-large-objects.sh @@ -0,0 +1,32 @@ +#!/bin/sh +# +# Copyright (c) 2018 Johannes Schindelin +# + +test_description='git pack-object with "large" deltas + +' +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-pack.sh + +# Two similar-ish objects that we have computed deltas between. +A=01d7713666f4de822776c7622c10f1b07de280dc +B=e68fe8129b546b101aee9510c5328e7f21ca1d18 + +test_expect_success 'setup' ' + clear_packs && + { + pack_header 2 && + pack_obj $A $B && + pack_obj $B + } >ab.pack && + pack_trailer ab.pack && + git index-pack --stdin <ab.pack +' + +test_expect_success 'repack large deltas' ' + printf "%s\\n" $A $B | + GIT_TEST_OE_DELTA_SIZE=2 git pack-objects tmp-pack +' + +test_done diff --git a/t/t5410-receive-pack-alternates.sh b/t/t5410-receive-pack-alternates.sh new file mode 100755 index 0000000000..f00d0da860 --- /dev/null +++ b/t/t5410-receive-pack-alternates.sh @@ -0,0 +1,41 @@ +#!/bin/sh + +test_description='git receive-pack with alternate ref filtering' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit base && + git clone -s --bare . fork && + git checkout -b public/branch master && + test_commit public && + git checkout -b private/branch master && + test_commit private +' + +extract_haves () { + depacketize | perl -lne '/^(\S+) \.have/ and print $1' +} + +test_expect_success 'with core.alternateRefsCommand' ' + write_script fork/alternate-refs <<-\EOF && + git --git-dir="$1" for-each-ref \ + --format="%(objectname)" \ + refs/heads/public/ + EOF + test_config -C fork core.alternateRefsCommand ./alternate-refs && + git rev-parse public/branch >expect && + printf "0000" | git receive-pack fork >actual && + extract_haves <actual >actual.haves && + test_cmp expect actual.haves +' + +test_expect_success 'with core.alternateRefsPrefixes' ' + test_config -C fork core.alternateRefsPrefixes "refs/heads/private" && + git rev-parse private/branch >expect && + printf "0000" | git receive-pack fork >actual && + extract_haves <actual >actual.haves && + test_cmp expect actual.haves +' + +test_done diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 1b5a4a6d38..086f2c40f6 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -50,8 +50,11 @@ pull_to_client () { case "$heads" in *B*) git update-ref refs/heads/B "$BTIP";; esac && - git symbolic-ref HEAD refs/heads/$(echo $heads \ - | sed -e "s/^\(.\).*$/\1/") && + + git symbolic-ref HEAD refs/heads/$( + echo $heads | + sed -e "s/^\(.\).*$/\1/" + ) && git fsck --full && diff --git a/t/t5504-fetch-receive-strict.sh b/t/t5504-fetch-receive-strict.sh index 62f3569891..7bc706873c 100755 --- a/t/t5504-fetch-receive-strict.sh +++ b/t/t5504-fetch-receive-strict.sh @@ -133,6 +133,34 @@ committer Bugs Bunny <bugs@bun.ni> 1234567890 +0000 This commit object intentionally broken EOF +test_expect_success 'setup bogus commit' ' + commit="$(git hash-object -t commit -w --stdin <bogus-commit)" +' + +test_expect_success 'fsck with no skipList input' ' + test_must_fail git fsck 2>err && + test_i18ngrep "missingEmail" err +' + +test_expect_success 'setup sorted and unsorted skipLists' ' + cat >SKIP.unsorted <<-EOF && + 0000000000000000000000000000000000000004 + 0000000000000000000000000000000000000002 + $commit + 0000000000000000000000000000000000000001 + 0000000000000000000000000000000000000003 + EOF + sort SKIP.unsorted >SKIP.sorted +' + +test_expect_success 'fsck with sorted skipList' ' + git -c fsck.skipList=SKIP.sorted fsck +' + +test_expect_success 'fsck with unsorted skipList' ' + git -c fsck.skipList=SKIP.unsorted fsck +' + test_expect_success 'fsck with invalid or bogus skipList input' ' git -c fsck.skipList=/dev/null -c fsck.missingEmail=ignore fsck && test_must_fail git -c fsck.skipList=does-not-exist -c fsck.missingEmail=ignore fsck 2>err && @@ -141,8 +169,47 @@ test_expect_success 'fsck with invalid or bogus skipList input' ' test_i18ngrep "Invalid SHA-1: \[core\]" err ' +test_expect_success 'fsck with other accepted skipList input (comments & empty lines)' ' + cat >SKIP.with-comment <<-EOF && + # Some bad commit + 0000000000000000000000000000000000000001 + EOF + test_must_fail git -c fsck.skipList=SKIP.with-comment fsck 2>err-with-comment && + test_i18ngrep "missingEmail" err-with-comment && + cat >SKIP.with-empty-line <<-EOF && + 0000000000000000000000000000000000000001 + + 0000000000000000000000000000000000000002 + EOF + test_must_fail git -c fsck.skipList=SKIP.with-empty-line fsck 2>err-with-empty-line && + test_i18ngrep "missingEmail" err-with-empty-line +' + +test_expect_success 'fsck no garbage output from comments & empty lines errors' ' + test_line_count = 1 err-with-comment && + test_line_count = 1 err-with-empty-line +' + +test_expect_success 'fsck with invalid abbreviated skipList input' ' + echo $commit | test_copy_bytes 20 >SKIP.abbreviated && + test_must_fail git -c fsck.skipList=SKIP.abbreviated fsck 2>err-abbreviated && + test_i18ngrep "^fatal: Invalid SHA-1: " err-abbreviated +' + +test_expect_success 'fsck with exhaustive accepted skipList input (various types of comments etc.)' ' + >SKIP.exhaustive && + echo "# A commented line" >>SKIP.exhaustive && + echo "" >>SKIP.exhaustive && + echo " " >>SKIP.exhaustive && + echo " # Comment after whitespace" >>SKIP.exhaustive && + echo "$commit # Our bad commit (with leading whitespace and trailing comment)" >>SKIP.exhaustive && + echo "# Some bad commit (leading whitespace)" >>SKIP.exhaustive && + echo " 0000000000000000000000000000000000000001" >>SKIP.exhaustive && + git -c fsck.skipList=SKIP.exhaustive fsck 2>err && + test_must_be_empty err +' + test_expect_success 'push with receive.fsck.skipList' ' - commit="$(git hash-object -t commit -w --stdin <bogus-commit)" && git push . $commit:refs/heads/bogus && rm -rf dst && git init dst && @@ -169,7 +236,6 @@ test_expect_success 'push with receive.fsck.skipList' ' ' test_expect_success 'fetch with fetch.fsck.skipList' ' - commit="$(git hash-object -t commit -w --stdin <bogus-commit)" && refspec=refs/heads/bogus:refs/heads/bogus && git push . $commit:refs/heads/bogus && rm -rf dst && @@ -204,7 +270,6 @@ test_expect_success 'fsck.<unknownmsg-id> dies' ' ' test_expect_success 'push with receive.fsck.missingEmail=warn' ' - commit="$(git hash-object -t commit -w --stdin <bogus-commit)" && git push . $commit:refs/heads/bogus && rm -rf dst && git init dst && @@ -232,7 +297,6 @@ test_expect_success 'push with receive.fsck.missingEmail=warn' ' ' test_expect_success 'fetch with fetch.fsck.missingEmail=warn' ' - commit="$(git hash-object -t commit -w --stdin <bogus-commit)" && refspec=refs/heads/bogus:refs/heads/bogus && git push . $commit:refs/heads/bogus && rm -rf dst && diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index bc5703ff9b..32e722db2e 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -302,4 +302,28 @@ test_expect_success 'ls-remote works outside repository' ' nongit git ls-remote dst.git ' +test_expect_success 'ls-remote --sort fails gracefully outside repository' ' + # Use a sort key that requires access to the referenced objects. + nongit test_must_fail git ls-remote --sort=authordate "$TRASH_DIRECTORY" 2>err && + test_i18ngrep "^fatal: not a git repository, but the field '\''authordate'\'' requires access to object data" err +' + +test_expect_success 'ls-remote patterns work with all protocol versions' ' + git for-each-ref --format="%(objectname) %(refname)" \ + refs/heads/master refs/remotes/origin/master >expect && + git -c protocol.version=1 ls-remote . master >actual.v1 && + test_cmp expect actual.v1 && + git -c protocol.version=2 ls-remote . master >actual.v2 && + test_cmp expect actual.v2 +' + +test_expect_success 'ls-remote prefixes work with all protocol versions' ' + git for-each-ref --format="%(objectname) %(refname)" \ + refs/heads/ refs/tags/ >expect && + git -c protocol.version=1 ls-remote --heads --tags . >actual.v1 && + test_cmp expect actual.v1 && + git -c protocol.version=2 ls-remote --heads --tags . >actual.v2 && + test_cmp expect actual.v2 +' + test_done diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 7a8f56db53..7316365a24 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -1577,7 +1577,13 @@ test_expect_success 'receive.denyCurrentBranch = updateInstead' ' test $(git -C .. rev-parse master) = $(git rev-parse HEAD) && git diff --quiet && git diff --cached --quiet - ) + ) && + + # (6) updateInstead intervened by fast-forward check + test_must_fail git push void master^:master && + test $(git -C void rev-parse HEAD) = $(git rev-parse master) && + git -C void diff --quiet && + git -C void diff --cached --quiet ' test_expect_success 'updateInstead with push-to-checkout hook' ' diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index 5e501c8b08..cf4cc32fd0 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -461,7 +461,8 @@ test_expect_success 'pull.rebase=1 is treated as true and flattens keep-merge' ' test file3 = "$(git show HEAD:file3.t)" ' -test_expect_success 'pull.rebase=preserve rebases and merges keep-merge' ' +test_expect_success REBASE_P \ + 'pull.rebase=preserve rebases and merges keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase preserve && git pull . copy && @@ -514,7 +515,8 @@ test_expect_success '--rebase=true rebases and flattens keep-merge' ' test file3 = "$(git show HEAD:file3.t)" ' -test_expect_success '--rebase=preserve rebases and merges keep-merge' ' +test_expect_success REBASE_P \ + '--rebase=preserve rebases and merges keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase true && git pull --rebase=preserve . copy && diff --git a/t/t5537-fetch-shallow.sh b/t/t5537-fetch-shallow.sh index 7045685e2d..6faf17e17a 100755 --- a/t/t5537-fetch-shallow.sh +++ b/t/t5537-fetch-shallow.sh @@ -186,6 +186,33 @@ EOF test_cmp expect actual ' +test_expect_success '.git/shallow is edited by repack' ' + git init shallow-server && + test_commit -C shallow-server A && + test_commit -C shallow-server B && + git -C shallow-server checkout -b branch && + test_commit -C shallow-server C && + test_commit -C shallow-server E && + test_commit -C shallow-server D && + d="$(git -C shallow-server rev-parse --verify D^0)" && + git -C shallow-server checkout master && + + git clone --depth=1 --no-tags --no-single-branch \ + "file://$PWD/shallow-server" shallow-client && + + : now remove the branch and fetch with prune && + git -C shallow-server branch -D branch && + git -C shallow-client fetch --prune --depth=1 \ + origin "+refs/heads/*:refs/remotes/origin/*" && + git -C shallow-client repack -adfl && + test_must_fail git -C shallow-client rev-parse --verify $d^0 && + ! grep $d shallow-client/.git/shallow && + + git -C shallow-server branch branch-orig $d && + git -C shallow-client fetch --prune --depth=2 \ + origin "+refs/heads/*:refs/remotes/origin/*" +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index 771f36f9ff..8630b0cc39 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -23,26 +23,26 @@ test_expect_success 'create http-accessible bare repository' ' setup_askpass_helper -cat >exp <<EOF -> GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 -> Accept: */* -> Accept-Encoding: ENCODINGS -> Pragma: no-cache -< HTTP/1.1 200 OK -< Pragma: no-cache -< Cache-Control: no-cache, max-age=0, must-revalidate -< Content-Type: application/x-git-upload-pack-advertisement -> POST /smart/repo.git/git-upload-pack HTTP/1.1 -> Accept-Encoding: ENCODINGS -> Content-Type: application/x-git-upload-pack-request -> Accept: application/x-git-upload-pack-result -> Content-Length: xxx -< HTTP/1.1 200 OK -< Pragma: no-cache -< Cache-Control: no-cache, max-age=0, must-revalidate -< Content-Type: application/x-git-upload-pack-result -EOF test_expect_success 'clone http repository' ' + cat >exp <<-\EOF && + > GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 + > Accept: */* + > Accept-Encoding: ENCODINGS + > Pragma: no-cache + < HTTP/1.1 200 OK + < Pragma: no-cache + < Cache-Control: no-cache, max-age=0, must-revalidate + < Content-Type: application/x-git-upload-pack-advertisement + > POST /smart/repo.git/git-upload-pack HTTP/1.1 + > Accept-Encoding: ENCODINGS + > Content-Type: application/x-git-upload-pack-request + > Accept: application/x-git-upload-pack-result + > Content-Length: xxx + < HTTP/1.1 200 OK + < Pragma: no-cache + < Cache-Control: no-cache, max-age=0, must-revalidate + < Content-Type: application/x-git-upload-pack-result + EOF GIT_TRACE_CURL=true git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && test_cmp file clone/file && tr '\''\015'\'' Q <err | @@ -96,13 +96,13 @@ test_expect_success 'fetch changes via http' ' test_cmp file clone/file ' -cat >exp <<EOF -GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 -POST /smart/repo.git/git-upload-pack HTTP/1.1 200 -GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 -POST /smart/repo.git/git-upload-pack HTTP/1.1 200 -EOF test_expect_success 'used upload-pack service' ' + cat >exp <<-\EOF && + GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 + POST /smart/repo.git/git-upload-pack HTTP/1.1 200 + GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 + POST /smart/repo.git/git-upload-pack HTTP/1.1 200 + EOF check_access_log exp ' @@ -203,19 +203,19 @@ test_expect_success 'dumb clone via http-backend respects namespace' ' test_cmp expect actual ' -cat >cookies.txt <<EOF -127.0.0.1 FALSE /smart_cookies/ FALSE 0 othername othervalue -EOF -cat >expect_cookies.txt <<EOF - -127.0.0.1 FALSE /smart_cookies/ FALSE 0 othername othervalue -127.0.0.1 FALSE /smart_cookies/repo.git/info/ FALSE 0 name value -EOF test_expect_success 'cookies stored in http.cookiefile when http.savecookies set' ' + cat >cookies.txt <<-\EOF && + 127.0.0.1 FALSE /smart_cookies/ FALSE 0 othername othervalue + EOF + sort >expect_cookies.txt <<-\EOF && + + 127.0.0.1 FALSE /smart_cookies/ FALSE 0 othername othervalue + 127.0.0.1 FALSE /smart_cookies/repo.git/info/ FALSE 0 name value + EOF git config http.cookiefile cookies.txt && git config http.savecookies true && git ls-remote $HTTPD_URL/smart_cookies/repo.git master && - tail -3 cookies.txt >cookies_tail.txt && + tail -3 cookies.txt | sort >cookies_tail.txt && test_cmp expect_cookies.txt cookies_tail.txt ' @@ -381,6 +381,21 @@ test_expect_success 'using fetch command in remote-curl updates refs' ' test_cmp expect actual ' +test_expect_success 'fetch by SHA-1 without tag following' ' + SERVER="$HTTPD_DOCUMENT_ROOT_PATH/server" && + rm -rf "$SERVER" client && + + git init "$SERVER" && + test_commit -C "$SERVER" foo && + + git clone $HTTPD_URL/smart/server client && + + test_commit -C "$SERVER" bar && + git -C "$SERVER" rev-parse bar >bar_hash && + git -C client -c protocol.version=0 fetch \ + --no-tags origin $(cat bar_hash) +' + test_expect_success 'GIT_REDACT_COOKIES redacts cookies' ' rm -rf clone && echo "Set-Cookie: Foo=1" >cookies && diff --git a/t/t5562-http-backend-content-length.sh b/t/t5562-http-backend-content-length.sh index b24d8b05a4..90d890d02f 100755 --- a/t/t5562-http-backend-content-length.sh +++ b/t/t5562-http-backend-content-length.sh @@ -31,6 +31,7 @@ test_http_env() { PATH_TRANSLATED="$PWD/.git/git-$handler_type-pack" \ GIT_HTTP_EXPORT_ALL=TRUE \ REQUEST_METHOD=POST \ + "$PERL_PATH" \ "$TEST_DIRECTORY"/t5562/invoke-with-content-length.pl \ "$request_body" git http-backend >act.out 2>act.err } diff --git a/t/t5562/invoke-with-content-length.pl b/t/t5562/invoke-with-content-length.pl index 6c2aae7692..0943474af2 100755..100644 --- a/t/t5562/invoke-with-content-length.pl +++ b/t/t5562/invoke-with-content-length.pl @@ -1,4 +1,3 @@ -#!/usr/bin/perl use 5.008; use strict; use warnings; diff --git a/t/t5573-pull-verify-signatures.sh b/t/t5573-pull-verify-signatures.sh index 747775c147..3e9876e197 100755 --- a/t/t5573-pull-verify-signatures.sh +++ b/t/t5573-pull-verify-signatures.sh @@ -78,4 +78,11 @@ test_expect_success GPG 'pull commit with bad signature with --no-verify-signatu git pull --ff-only --no-verify-signatures bad 2>pullerror ' +test_expect_success GPG 'pull unsigned commit into unborn branch' ' + git init empty-repo && + test_must_fail \ + git -C empty-repo pull --verify-signatures .. 2>pullerror && + test_i18ngrep "does not have a GPG signature" pullerror +' + test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index f1a49e94f5..8bbc7068ac 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -628,7 +628,7 @@ test_expect_success 'clone on case-insensitive fs' ' ) ' -test_expect_success !MINGW,!CYGWIN,CASE_INSENSITIVE_FS 'colliding file detection' ' +test_expect_success CASE_INSENSITIVE_FS 'colliding file detection' ' grep X icasefs/warning && grep x icasefs/warning && test_i18ngrep "the following paths have collided" icasefs/warning diff --git a/t/t5607-clone-bundle.sh b/t/t5607-clone-bundle.sh index 348d9b3bc7..cf39e9e243 100755 --- a/t/t5607-clone-bundle.sh +++ b/t/t5607-clone-bundle.sh @@ -71,4 +71,10 @@ test_expect_success 'prerequisites with an empty commit message' ' git bundle verify bundle ' +test_expect_success 'failed bundle creation does not leave cruft' ' + # This fails because the bundle would be empty. + test_must_fail git bundle create fail.bundle master..master && + test_path_is_missing fail.bundle.lock +' + test_done diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh index bbbe7537df..336f02a41a 100755 --- a/t/t5616-partial-clone.sh +++ b/t/t5616-partial-clone.sh @@ -34,10 +34,12 @@ test_expect_success 'setup bare clone for server' ' # confirm partial clone was registered in the local config. test_expect_success 'do partial clone 1' ' git clone --no-checkout --filter=blob:none "file://$(pwd)/srv.bare" pc1 && - git -C pc1 rev-list HEAD --quiet --objects --missing=print \ - | awk -f print_1.awk \ - | sed "s/?//" \ - | sort >observed.oids && + + git -C pc1 rev-list --quiet --objects --missing=print HEAD >revs && + awk -f print_1.awk revs | + sed "s/?//" | + sort >observed.oids && + test_cmp expect_1.oids observed.oids && test "$(git -C pc1 config --local core.repositoryformatversion)" = "1" && test "$(git -C pc1 config --local extensions.partialclone)" = "origin" && @@ -46,10 +48,10 @@ test_expect_success 'do partial clone 1' ' # checkout master to force dynamic object fetch of blobs at HEAD. test_expect_success 'verify checkout with dynamic object fetch' ' - git -C pc1 rev-list HEAD --quiet --objects --missing=print >observed && + git -C pc1 rev-list --quiet --objects --missing=print HEAD >observed && test_line_count = 4 observed && git -C pc1 checkout master && - git -C pc1 rev-list HEAD --quiet --objects --missing=print >observed && + git -C pc1 rev-list --quiet --objects --missing=print HEAD >observed && test_line_count = 0 observed ' @@ -72,7 +74,8 @@ test_expect_success 'push new commits to server' ' # have the new blobs. test_expect_success 'partial fetch inherits filter settings' ' git -C pc1 fetch origin && - git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + git -C pc1 rev-list --quiet --objects --missing=print \ + master..origin/master >observed && test_line_count = 5 observed ' @@ -80,7 +83,8 @@ test_expect_success 'partial fetch inherits filter settings' ' # we should only get 1 new blob (for the file in origin/master). test_expect_success 'verify diff causes dynamic object fetch' ' git -C pc1 diff master..origin/master -- file.1.txt && - git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + git -C pc1 rev-list --quiet --objects --missing=print \ + master..origin/master >observed && test_line_count = 4 observed ' @@ -89,7 +93,8 @@ test_expect_success 'verify diff causes dynamic object fetch' ' test_expect_success 'verify blame causes dynamic object fetch' ' git -C pc1 blame origin/master -- file.1.txt >observed.blame && test_cmp expect.blame observed.blame && - git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + git -C pc1 rev-list --quiet --objects --missing=print \ + master..origin/master >observed && test_line_count = 0 observed ' @@ -109,7 +114,8 @@ test_expect_success 'push new commits to server for file.2.txt' ' # Verify we have all the new blobs. test_expect_success 'override inherited filter-spec using --no-filter' ' git -C pc1 fetch --no-filter origin && - git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + git -C pc1 rev-list --quiet --objects --missing=print \ + master..origin/master >observed && test_line_count = 0 observed ' @@ -130,16 +136,22 @@ test_expect_success 'push new commits to server for file.3.txt' ' # perhaps combined with a command in dry-run mode. test_expect_success 'manual prefetch of missing objects' ' git -C pc1 fetch --filter=blob:none origin && - git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \ - | awk -f print_1.awk \ - | sed "s/?//" \ - | sort >observed.oids && + + git -C pc1 rev-list --quiet --objects --missing=print \ + master..origin/master >revs && + awk -f print_1.awk revs | + sed "s/?//" | + sort >observed.oids && + test_line_count = 6 observed.oids && git -C pc1 fetch-pack --stdin "file://$(pwd)/srv.bare" <observed.oids && - git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \ - | awk -f print_1.awk \ - | sed "s/?//" \ - | sort >observed.oids && + + git -C pc1 rev-list --quiet --objects --missing=print \ + master..origin/master >revs && + awk -f print_1.awk revs | + sed "s/?//" | + sort >observed.oids && + test_line_count = 0 observed.oids ' @@ -154,6 +166,48 @@ test_expect_success 'partial clone with transfer.fsckobjects=1 uses index-pack - grep "git index-pack.*--fsck-objects" trace ' +test_expect_success 'use fsck before and after manually fetching a missing subtree' ' + # push new commit so server has a subtree + mkdir src/dir && + echo "in dir" >src/dir/file.txt && + git -C src add dir/file.txt && + git -C src commit -m "file in dir" && + git -C src push -u srv master && + SUBTREE=$(git -C src rev-parse HEAD:dir) && + + rm -rf dst && + git clone --no-checkout --filter=tree:0 "file://$(pwd)/srv.bare" dst && + git -C dst fsck && + + # Make sure we only have commits, and all trees and blobs are missing. + git -C dst rev-list --missing=allow-any --objects master \ + >fetched_objects && + awk -f print_1.awk fetched_objects | + xargs -n1 git -C dst cat-file -t >fetched_types && + + sort -u fetched_types >unique_types.observed && + echo commit >unique_types.expected && + test_cmp unique_types.expected unique_types.observed && + + # Auto-fetch a tree with cat-file. + git -C dst cat-file -p $SUBTREE >tree_contents && + grep file.txt tree_contents && + + # fsck still works after an auto-fetch of a tree. + git -C dst fsck && + + # Auto-fetch all remaining trees and blobs with --missing=error + git -C dst rev-list --missing=error --objects master >fetched_objects && + test_line_count = 70 fetched_objects && + + awk -f print_1.awk fetched_objects | + xargs -n1 git -C dst cat-file -t >fetched_types && + + sort -u fetched_types >unique_types.observed && + test_write_lines blob commit tree >unique_types.expected && + test_cmp unique_types.expected unique_types.observed +' + test_expect_success 'partial clone fetches blobs pointed to by refs even if normally filtered out' ' rm -rf src dst && git init src && @@ -170,6 +224,23 @@ test_expect_success 'partial clone fetches blobs pointed to by refs even if norm git -C dst fsck ' +test_expect_success 'fetch what is specified on CLI even if already promised' ' + rm -rf src dst.git && + git init src && + test_commit -C src foo && + test_config -C src uploadpack.allowfilter 1 && + test_config -C src uploadpack.allowanysha1inwant 1 && + + git hash-object --stdin <src/foo.t >blob && + + git clone --bare --filter=blob:none "file://$(pwd)/src" dst.git && + git -C dst.git rev-list --objects --quiet --missing=print HEAD >missing_before && + grep "?$(cat blob)" missing_before && + git -C dst.git fetch origin $(cat blob) && + git -C dst.git rev-list --objects --quiet --missing=print HEAD >missing_after && + ! grep "?$(cat blob)" missing_after +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd @@ -194,7 +265,7 @@ test_expect_success 'upon cloning, check that all refs point to objects' ' # Craft a packfile not including that blob. git -C "$SERVER" rev-parse HEAD | - git -C "$SERVER" pack-objects --stdout >incomplete.pack && + git -C "$SERVER" pack-objects --stdout >incomplete.pack && # Replace the existing packfile with the crafted one. The protocol # requires that the packfile be sent in sideband 1, hence the extra diff --git a/t/t5701-git-serve.sh b/t/t5701-git-serve.sh index 75ec79e6cb..ae79c6bbc0 100755 --- a/t/t5701-git-serve.sh +++ b/t/t5701-git-serve.sh @@ -15,13 +15,13 @@ test_expect_success 'test capability advertisement' ' EOF git serve --advertise-capabilities >out && - test-pkt-line unpack <out >actual && - test_cmp actual expect + test-tool pkt-line unpack <out >actual && + test_cmp expect actual ' test_expect_success 'stateless-rpc flag does not list capabilities' ' # Empty request - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && 0000 EOF git serve --stateless-rpc >out <in && @@ -33,7 +33,7 @@ test_expect_success 'stateless-rpc flag does not list capabilities' ' ' test_expect_success 'request invalid capability' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && foobar 0000 EOF @@ -42,7 +42,7 @@ test_expect_success 'request invalid capability' ' ' test_expect_success 'request with no command' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && agent=git/test 0000 EOF @@ -51,7 +51,7 @@ test_expect_success 'request with no command' ' ' test_expect_success 'request invalid command' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=foo agent=git/test 0000 @@ -71,7 +71,7 @@ test_expect_success 'setup some refs and tags' ' ' test_expect_success 'basics of ls-refs' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=ls-refs 0000 EOF @@ -88,12 +88,12 @@ test_expect_success 'basics of ls-refs' ' EOF git serve --stateless-rpc <in >out && - test-pkt-line unpack <out >actual && - test_cmp actual expect + test-tool pkt-line unpack <out >actual && + test_cmp expect actual ' test_expect_success 'basic ref-prefixes' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=ls-refs 0001 ref-prefix refs/heads/master @@ -108,12 +108,12 @@ test_expect_success 'basic ref-prefixes' ' EOF git serve --stateless-rpc <in >out && - test-pkt-line unpack <out >actual && - test_cmp actual expect + test-tool pkt-line unpack <out >actual && + test_cmp expect actual ' test_expect_success 'refs/heads prefix' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=ls-refs 0001 ref-prefix refs/heads/ @@ -128,12 +128,12 @@ test_expect_success 'refs/heads prefix' ' EOF git serve --stateless-rpc <in >out && - test-pkt-line unpack <out >actual && - test_cmp actual expect + test-tool pkt-line unpack <out >actual && + test_cmp expect actual ' test_expect_success 'peel parameter' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=ls-refs 0001 peel @@ -149,12 +149,12 @@ test_expect_success 'peel parameter' ' EOF git serve --stateless-rpc <in >out && - test-pkt-line unpack <out >actual && - test_cmp actual expect + test-tool pkt-line unpack <out >actual && + test_cmp expect actual ' test_expect_success 'symrefs parameter' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=ls-refs 0001 symrefs @@ -170,12 +170,12 @@ test_expect_success 'symrefs parameter' ' EOF git serve --stateless-rpc <in >out && - test-pkt-line unpack <out >actual && - test_cmp actual expect + test-tool pkt-line unpack <out >actual && + test_cmp expect actual ' test_expect_success 'sending server-options' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=ls-refs server-option=hello server-option=world @@ -190,14 +190,14 @@ test_expect_success 'sending server-options' ' EOF git serve --stateless-rpc <in >out && - test-pkt-line unpack <out >actual && - test_cmp actual expect + test-tool pkt-line unpack <out >actual && + test_cmp expect actual ' test_expect_success 'unexpected lines are not allowed in fetch request' ' git init server && - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=fetch 0001 this-is-not-a-command diff --git a/t/t5702-protocol-v2.sh b/t/t5702-protocol-v2.sh index 3beeed4546..0f2b09ebb8 100755 --- a/t/t5702-protocol-v2.sh +++ b/t/t5702-protocol-v2.sh @@ -29,7 +29,7 @@ test_expect_success 'list refs with git:// using protocol v2' ' grep "git< version 2" log && git ls-remote --symref "$GIT_DAEMON_URL/parent" >expect && - test_cmp actual expect + test_cmp expect actual ' test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' @@ -42,7 +42,7 @@ test_expect_success 'ref advertisment is filtered with ls-remote using protocol $(git -C "$daemon_parent" rev-parse refs/heads/master)$(printf "\t")refs/heads/master EOF - test_cmp actual expect + test_cmp expect actual ' test_expect_success 'clone with git:// using protocol v2' ' @@ -79,6 +79,19 @@ test_expect_success 'fetch with git:// using protocol v2' ' grep "fetch< version 2" log ' +test_expect_success 'fetch by hash without tag following with protocol v2 does not list refs' ' + test_when_finished "rm -f log" && + + test_commit -C "$daemon_parent" two_a && + git -C "$daemon_parent" rev-parse two_a >two_a_hash && + + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + fetch --no-tags origin $(cat two_a_hash) && + + grep "fetch< version 2" log && + ! grep "fetch> command=ls-refs" log +' + test_expect_success 'pull with git:// using protocol v2' ' test_when_finished "rm -f log" && @@ -138,7 +151,7 @@ test_expect_success 'list refs with file:// using protocol v2' ' grep "git< version 2" log && git ls-remote --symref "file://$(pwd)/file_parent" >expect && - test_cmp actual expect + test_cmp expect actual ' test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' @@ -151,7 +164,7 @@ test_expect_success 'ref advertisment is filtered with ls-remote using protocol $(git -C file_parent rev-parse refs/heads/master)$(printf "\t")refs/heads/master EOF - test_cmp actual expect + test_cmp expect actual ' test_expect_success 'server-options are sent when using ls-remote' ' @@ -164,7 +177,7 @@ test_expect_success 'server-options are sent when using ls-remote' ' $(git -C file_parent rev-parse refs/heads/master)$(printf "\t")refs/heads/master EOF - test_cmp actual expect && + test_cmp expect actual && grep "server-option=hello" log && grep "server-option=world" log ' @@ -271,7 +284,7 @@ test_expect_success 'partial clone' ' grep "version 2" trace && # Ensure that the old version of the file is missing - git -C client rev-list master --quiet --objects --missing=print \ + git -C client rev-list --quiet --objects --missing=print master \ >observed.oids && grep "$(git -C server rev-parse message1:a.txt)" observed.oids && @@ -286,6 +299,10 @@ test_expect_success 'dynamically fetch missing object' ' grep "version 2" trace ' +test_expect_success 'when dynamically fetching missing object, do not list refs' ' + ! grep "git> command=ls-refs" trace +' + test_expect_success 'partial fetch' ' rm -rf client "$(pwd)/trace" && git init client && @@ -297,7 +314,7 @@ test_expect_success 'partial fetch' ' grep "version 2" trace && # Ensure that the old version of the file is missing - git -C client rev-list other --quiet --objects --missing=print \ + git -C client rev-list --quiet --objects --missing=print other \ >observed.oids && grep "$(git -C server rev-parse message1:a.txt)" observed.oids && @@ -334,7 +351,7 @@ test_expect_success 'even with handcrafted request, filter does not work if not git -C server config uploadpack.allowfilter 0 && # Custom request that tries to filter even though it is not advertised. - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=fetch 0001 want $(git -C server rev-parse master) @@ -429,6 +446,31 @@ test_expect_success 'fetch supports include-tag and tag following' ' git -C client cat-file -e $(git -C client rev-parse annotated_tag) ' +test_expect_success 'upload-pack respects client shallows' ' + rm -rf server client trace && + + git init server && + test_commit -C server base && + test_commit -C server client_has && + + git clone --depth=1 "file://$(pwd)/server" client && + + # Add extra commits to the client so that the whole fetch takes more + # than 1 request (due to negotiation) + for i in $(test_seq 1 32) + do + test_commit -C client c$i + done && + + git -C server checkout -b newbranch base && + test_commit -C server client_wants && + + GIT_TRACE_PACKET="$(pwd)/trace" git -C client -c protocol.version=2 \ + fetch origin newbranch && + # Ensure that protocol v2 is used + grep "fetch< version 2" trace +' + # Test protocol v2 with 'http://' transport # . "$TEST_DIRECTORY"/lib-httpd.sh @@ -495,6 +537,56 @@ test_expect_success 'push with http:// and a config of v2 does not request v2' ' ! grep "git< version 2" log ' +test_expect_success 'when server sends "ready", expect DELIM' ' + rm -rf "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" http_child && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" one && + + git clone "$HTTPD_URL/smart/http_parent" http_child && + + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two && + + # After "ready" in the acknowledgments section, pretend that a FLUSH + # (0000) was sent instead of a DELIM (0001). + printf "/ready/,$ s/0001/0000/" \ + >"$HTTPD_ROOT_PATH/one-time-sed" && + + test_must_fail git -C http_child -c protocol.version=2 \ + fetch "$HTTPD_URL/one_time_sed/http_parent" 2> err && + test_i18ngrep "expected packfile to be sent after .ready." err +' + +test_expect_success 'when server does not send "ready", expect FLUSH' ' + rm -rf "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" http_child log && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" one && + + git clone "$HTTPD_URL/smart/http_parent" http_child && + + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two && + + # Create many commits to extend the negotiation phase across multiple + # requests, so that the server does not send "ready" in the first + # request. + for i in $(test_seq 1 32) + do + test_commit -C http_child c$i + done && + + # After the acknowledgments section, pretend that a DELIM + # (0001) was sent instead of a FLUSH (0000). + printf "/acknowledgments/,$ s/0000/0001/" \ + >"$HTTPD_ROOT_PATH/one-time-sed" && + + test_must_fail env GIT_TRACE_PACKET="$(pwd)/log" git -C http_child \ + -c protocol.version=2 \ + fetch "$HTTPD_URL/one_time_sed/http_parent" 2> err && + grep "fetch< acknowledgments" log && + ! grep "fetch< ready" log && + test_i18ngrep "expected no other sections to be sent after no .ready." err +' stop_httpd diff --git a/t/t5703-upload-pack-ref-in-want.sh b/t/t5703-upload-pack-ref-in-want.sh index d1ccc22331..3f58f05cbb 100755 --- a/t/t5703-upload-pack-ref-in-want.sh +++ b/t/t5703-upload-pack-ref-in-want.sh @@ -9,14 +9,14 @@ get_actual_refs () { /wanted-refs/d /0001/d p - }' <out | test-pkt-line unpack >actual_refs + }' <out | test-tool pkt-line unpack >actual_refs } get_actual_commits () { sed -n -e '/packfile/,/0000/{ /packfile/d p - }' <out | test-pkt-line unpack-sideband >o.pack && + }' <out | test-tool pkt-line unpack-sideband >o.pack && git index-pack o.pack && git verify-pack -v o.idx | grep commit | cut -c-40 | sort >actual_commits } @@ -61,7 +61,7 @@ test_expect_success 'config controls ref-in-want advertisement' ' ' test_expect_success 'invalid want-ref line' ' - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress @@ -80,7 +80,7 @@ test_expect_success 'basic want-ref' ' EOF git rev-parse f | sort >expected_commits && - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress @@ -101,7 +101,7 @@ test_expect_success 'multiple want-ref lines' ' EOF git rev-parse c d | sort >expected_commits && - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress @@ -122,7 +122,7 @@ test_expect_success 'mix want and want-ref' ' EOF git rev-parse e f | sort >expected_commits && - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress @@ -143,7 +143,7 @@ test_expect_success 'want-ref with ref we already have commit for' ' EOF >expected_commits && - test-pkt-line pack >in <<-EOF && + test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh index fb4d295aa0..0507999729 100755 --- a/t/t6000-rev-list-misc.sh +++ b/t/t6000-rev-list-misc.sh @@ -90,11 +90,18 @@ test_expect_success 'rev-list can show index objects' ' 9200b628cf9dc883a85a7abc8d6e6730baee589c two EOF echo only-in-index >only-in-index && + test_when_finished "git reset --hard" && git add only-in-index && git rev-list --objects --indexed-objects >actual && test_cmp expect actual ' +test_expect_success 'rev-list can negate index objects' ' + git rev-parse HEAD >expect && + git rev-list -1 --objects HEAD --not --indexed-objects >actual && + test_cmp expect actual +' + test_expect_success '--bisect and --first-parent can not be combined' ' test_must_fail git rev-list --bisect --first-parent HEAD ' diff --git a/t/t6012-rev-list-simplify.sh b/t/t6012-rev-list-simplify.sh index b5a1190ffe..a10f0df02b 100755 --- a/t/t6012-rev-list-simplify.sh +++ b/t/t6012-rev-list-simplify.sh @@ -12,6 +12,22 @@ unnote () { git name-rev --tags --stdin | sed -e "s|$OID_REGEX (tags/\([^)]*\)) |\1 |g" } +# +# Create a test repo with interesting commit graph: +# +# A--B----------G--H--I--K--L +# \ \ / / +# \ \ / / +# C------E---F J +# \_/ +# +# The commits are laid out from left-to-right starting with +# the root commit A and terminating at the tip commit L. +# +# There are a few places where we adjust the commit date or +# author date to make the --topo-order, --date-order, and +# --author-date-order flags produce different output. + test_expect_success setup ' echo "Hi there" >file && echo "initial" >lost && @@ -21,10 +37,18 @@ test_expect_success setup ' git branch other-branch && + git symbolic-ref HEAD refs/heads/unrelated && + git rm -f "*" && + echo "Unrelated branch" >side && + git add side && + test_tick && git commit -m "Side root" && + note J && + git checkout master && + echo "Hello" >file && echo "second" >lost && git add file lost && - test_tick && git commit -m "Modified file and lost" && + test_tick && GIT_AUTHOR_DATE=$(($test_tick + 120)) git commit -m "Modified file and lost" && note B && git checkout other-branch && @@ -63,13 +87,6 @@ test_expect_success setup ' test_tick && git commit -a -m "Final change" && note I && - git symbolic-ref HEAD refs/heads/unrelated && - git rm -f "*" && - echo "Unrelated branch" >side && - git add side && - test_tick && git commit -m "Side root" && - note J && - git checkout master && test_tick && git merge --allow-unrelated-histories -m "Coolest" unrelated && note K && @@ -103,14 +120,24 @@ check_result () { check_outcome success "$@" } -check_result 'L K J I H G F E D C B A' --full-history +check_result 'L K J I H F E D C G B A' --full-history --topo-order +check_result 'L K I H G F E D C B J A' --full-history +check_result 'L K I H G F E D C B J A' --full-history --date-order +check_result 'L K I H G F E D B C J A' --full-history --author-date-order check_result 'K I H E C B A' --full-history -- file check_result 'K I H E C B A' --full-history --topo-order -- file check_result 'K I H E C B A' --full-history --date-order -- file +check_result 'K I H E B C A' --full-history --author-date-order -- file check_result 'I E C B A' --simplify-merges -- file +check_result 'I E C B A' --simplify-merges --topo-order -- file +check_result 'I E C B A' --simplify-merges --date-order -- file +check_result 'I E B C A' --simplify-merges --author-date-order -- file check_result 'I B A' -- file check_result 'I B A' --topo-order -- file +check_result 'I B A' --date-order -- file +check_result 'I B A' --author-date-order -- file check_result 'H' --first-parent -- another-file +check_result 'H' --first-parent --topo-order -- another-file check_result 'E C B A' --full-history E -- lost test_expect_success 'full history simplification without parent' ' diff --git a/t/t6018-rev-list-glob.sh b/t/t6018-rev-list-glob.sh index db8a7834d8..bb5aeac07f 100755 --- a/t/t6018-rev-list-glob.sh +++ b/t/t6018-rev-list-glob.sh @@ -36,7 +36,13 @@ test_expect_success 'setup' ' git tag foo/bar master && commit master3 && git update-ref refs/remotes/foo/baz master && - commit master4 + commit master4 && + git update-ref refs/remotes/upstream/one subspace/one && + git update-ref refs/remotes/upstream/two subspace/two && + git update-ref refs/remotes/upstream/x subspace-x && + git tag qux/one subspace/one && + git tag qux/two subspace/two && + git tag qux/x subspace-x ' test_expect_success 'rev-parse --glob=refs/heads/subspace/*' ' @@ -141,6 +147,66 @@ test_expect_success 'rev-parse accumulates multiple --exclude' ' compare rev-parse "--exclude=refs/remotes/* --exclude=refs/tags/* --all" --branches ' +test_expect_success 'rev-parse --branches clears --exclude' ' + compare rev-parse "--exclude=* --branches --branches" "--branches" +' + +test_expect_success 'rev-parse --tags clears --exclude' ' + compare rev-parse "--exclude=* --tags --tags" "--tags" +' + +test_expect_success 'rev-parse --all clears --exclude' ' + compare rev-parse "--exclude=* --all --all" "--all" +' + +test_expect_success 'rev-parse --exclude=glob with --branches=glob' ' + compare rev-parse "--exclude=subspace-* --branches=sub*" "subspace/one subspace/two" +' + +test_expect_success 'rev-parse --exclude=glob with --tags=glob' ' + compare rev-parse "--exclude=qux/? --tags=qux/*" "qux/one qux/two" +' + +test_expect_success 'rev-parse --exclude=glob with --remotes=glob' ' + compare rev-parse "--exclude=upstream/? --remotes=upstream/*" "upstream/one upstream/two" +' + +test_expect_success 'rev-parse --exclude=ref with --branches=glob' ' + compare rev-parse "--exclude=subspace-x --branches=sub*" "subspace/one subspace/two" +' + +test_expect_success 'rev-parse --exclude=ref with --tags=glob' ' + compare rev-parse "--exclude=qux/x --tags=qux/*" "qux/one qux/two" +' + +test_expect_success 'rev-parse --exclude=ref with --remotes=glob' ' + compare rev-parse "--exclude=upstream/x --remotes=upstream/*" "upstream/one upstream/two" +' + +test_expect_success 'rev-list --exclude=glob with --branches=glob' ' + compare rev-list "--exclude=subspace-* --branches=sub*" "subspace/one subspace/two" +' + +test_expect_success 'rev-list --exclude=glob with --tags=glob' ' + compare rev-list "--exclude=qux/? --tags=qux/*" "qux/one qux/two" +' + +test_expect_success 'rev-list --exclude=glob with --remotes=glob' ' + compare rev-list "--exclude=upstream/? --remotes=upstream/*" "upstream/one upstream/two" +' + +test_expect_success 'rev-list --exclude=ref with --branches=glob' ' + compare rev-list "--exclude=subspace-x --branches=sub*" "subspace/one subspace/two" +' + +test_expect_success 'rev-list --exclude=ref with --tags=glob' ' + compare rev-list "--exclude=qux/x --tags=qux/*" "qux/one qux/two" +' + +test_expect_success 'rev-list --exclude=ref with --remotes=glob' ' + compare rev-list "--exclude=upstream/x --remotes=upstream/*" "upstream/one upstream/two" +' + test_expect_success 'rev-list --glob=refs/heads/subspace/*' ' compare rev-list "subspace/one subspace/two" "--glob=refs/heads/subspace/*" @@ -233,7 +299,7 @@ test_expect_success 'rev-list --tags=foo' ' test_expect_success 'rev-list --tags' ' - compare rev-list "foo/bar" "--tags" + compare rev-list "foo/bar qux/x qux/two qux/one" "--tags" ' @@ -292,7 +358,7 @@ test_expect_success 'shortlog accepts --glob/--tags/--remotes' ' "master other/three someref subspace-x subspace/one subspace/two" \ "--glob=heads/*" && compare shortlog foo/bar --tags=foo && - compare shortlog foo/bar --tags && + compare shortlog "foo/bar qux/one qux/two qux/x" --tags && compare shortlog foo/baz --remotes=foo ' diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index 20aee43f95..51ee887a77 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -99,7 +99,7 @@ EOF printf "propter nomen suum." >> expect.txt test_expect_success "merge does not add LF away of change" \ - "test_cmp test3.txt expect.txt" + "test_cmp expect.txt test3.txt" cp test.txt backup.txt test_expect_success "merge with conflicts" \ @@ -122,7 +122,7 @@ non timebo mala, quoniam tu mecum es: virga tua et baculus tuus ipsa me consolata sunt. EOF -test_expect_success "expected conflict markers" "test_cmp test.txt expect.txt" +test_expect_success "expected conflict markers" "test_cmp expect.txt test.txt" cp backup.txt test.txt @@ -138,7 +138,7 @@ non timebo mala, quoniam tu mecum es: virga tua et baculus tuus ipsa me consolata sunt. EOF test_expect_success "merge conflicting with --ours" \ - "git merge-file --ours test.txt orig.txt new3.txt && test_cmp test.txt expect.txt" + "git merge-file --ours test.txt orig.txt new3.txt && test_cmp expect.txt test.txt" cp backup.txt test.txt cat > expect.txt << EOF @@ -154,7 +154,7 @@ non timebo mala, quoniam tu mecum es: virga tua et baculus tuus ipsa me consolata sunt. EOF test_expect_success "merge conflicting with --theirs" \ - "git merge-file --theirs test.txt orig.txt new3.txt && test_cmp test.txt expect.txt" + "git merge-file --theirs test.txt orig.txt new3.txt && test_cmp expect.txt test.txt" cp backup.txt test.txt cat > expect.txt << EOF @@ -171,7 +171,7 @@ non timebo mala, quoniam tu mecum es: virga tua et baculus tuus ipsa me consolata sunt. EOF test_expect_success "merge conflicting with --union" \ - "git merge-file --union test.txt orig.txt new3.txt && test_cmp test.txt expect.txt" + "git merge-file --union test.txt orig.txt new3.txt && test_cmp expect.txt test.txt" cp backup.txt test.txt test_expect_success "merge with conflicts, using -L" \ @@ -195,7 +195,7 @@ virga tua et baculus tuus ipsa me consolata sunt. EOF test_expect_success "expected conflict markers, with -L" \ - "test_cmp test.txt expect.txt" + "test_cmp expect.txt test.txt" sed "s/ tu / TU /" < new1.txt > new5.txt test_expect_success "conflict in removed tail" \ diff --git a/t/t6027-merge-binary.sh b/t/t6027-merge-binary.sh index 07735410b9..4e6c7cb77e 100755 --- a/t/t6027-merge-binary.sh +++ b/t/t6027-merge-binary.sh @@ -45,7 +45,7 @@ test_expect_success resolve ' false else git ls-files -s >current - test_cmp current expect + test_cmp expect current fi ' @@ -60,7 +60,7 @@ test_expect_success recursive ' false else git ls-files -s >current - test_cmp current expect + test_cmp expect current fi ' diff --git a/t/t6031-merge-filemode.sh b/t/t6031-merge-filemode.sh index 7d06461f13..87741efad3 100755 --- a/t/t6031-merge-filemode.sh +++ b/t/t6031-merge-filemode.sh @@ -61,7 +61,7 @@ do_both_modes () { git checkout -f a2 && test_must_fail git merge -s $strategy b2 && git ls-files -u >actual && - test_cmp actual expect && + test_cmp expect actual && git ls-files -s file2 | grep ^100755 ' diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index 59e52c5a09..e1cef58f2a 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -230,13 +230,13 @@ test_expect_success 'git detects differently handled merges conflict' ' :2:new_a :3:new_a && test_cmp expect actual && - git cat-file -p B:new_a >ours && - git cat-file -p C:new_a >theirs && + git cat-file -p C:new_a >ours && + git cat-file -p B:new_a >theirs && >empty && test_must_fail git merge-file \ - -L "Temporary merge branch 2" \ - -L "" \ -L "Temporary merge branch 1" \ + -L "" \ + -L "Temporary merge branch 2" \ ours empty theirs && sed -e "s/^\([<=>]\)/\1\1\1/" ours >expect && git cat-file -p :1:new_a >actual && diff --git a/t/t6112-rev-list-filters-objects.sh b/t/t6112-rev-list-filters-objects.sh index d4ff0b3bef..eb32505a6e 100755 --- a/t/t6112-rev-list-filters-objects.sh +++ b/t/t6112-rev-list-filters-objects.sh @@ -21,24 +21,43 @@ test_expect_success 'setup r1' ' test_expect_success 'verify blob:none omits all 5 blobs' ' git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \ - | awk -f print_2.awk \ - | sort >expected && - git -C r1 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:none \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + + git -C r1 rev-list --quiet --objects --filter-print-omitted \ + --filter=blob:none HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed +' + +test_expect_success 'specify blob explicitly prevents filtering' ' + file_3=$(git -C r1 ls-files -s file.3 | + awk -f print_2.awk) && + + file_4=$(git -C r1 ls-files -s file.4 | + awk -f print_2.awk) && + + git -C r1 rev-list --objects --filter=blob:none HEAD $file_3 >observed && + grep "$file_3" observed && + ! grep "$file_4" observed ' test_expect_success 'verify emitted+omitted == all' ' - git -C r1 rev-list HEAD --objects \ - | awk -f print_1.awk \ - | sort >expected && - git -C r1 rev-list HEAD --objects --filter-print-omitted --filter=blob:none \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + git -C r1 rev-list --objects HEAD >revs && + awk -f print_1.awk revs | + sort >expected && + + git -C r1 rev-list --objects --filter-print-omitted --filter=blob:none \ + HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed ' @@ -58,65 +77,82 @@ test_expect_success 'setup r2' ' ' test_expect_success 'verify blob:limit=500 omits all blobs' ' - git -C r2 ls-files -s large.1000 large.10000 \ - | awk -f print_2.awk \ - | sort >expected && - git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=500 \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + git -C r2 ls-files -s large.1000 large.10000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + + git -C r2 rev-list --quiet --objects --filter-print-omitted \ + --filter=blob:limit=500 HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify emitted+omitted == all' ' - git -C r2 rev-list HEAD --objects \ - | awk -f print_1.awk \ - | sort >expected && - git -C r2 rev-list HEAD --objects --filter-print-omitted --filter=blob:limit=500 \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + git -C r2 rev-list --objects HEAD >revs && + awk -f print_1.awk revs | + sort >expected && + + git -C r2 rev-list --objects --filter-print-omitted \ + --filter=blob:limit=500 HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify blob:limit=1000' ' - git -C r2 ls-files -s large.1000 large.10000 \ - | awk -f print_2.awk \ - | sort >expected && - git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1000 \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + git -C r2 ls-files -s large.1000 large.10000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + + git -C r2 rev-list --quiet --objects --filter-print-omitted \ + --filter=blob:limit=1000 HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify blob:limit=1001' ' - git -C r2 ls-files -s large.10000 \ - | awk -f print_2.awk \ - | sort >expected && - git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1001 \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + git -C r2 ls-files -s large.10000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + + git -C r2 rev-list --quiet --objects --filter-print-omitted \ + --filter=blob:limit=1001 HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify blob:limit=1k' ' - git -C r2 ls-files -s large.10000 \ - | awk -f print_2.awk \ - | sort >expected && - git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1k \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + git -C r2 ls-files -s large.10000 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + + git -C r2 rev-list --quiet --objects --filter-print-omitted \ + --filter=blob:limit=1k HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify blob:limit=1m' ' - git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1m \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && + git -C r2 rev-list --quiet --objects --filter-print-omitted \ + --filter=blob:limit=1m HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + test_must_be_empty observed ' @@ -141,25 +177,31 @@ test_expect_success 'setup r3' ' ' test_expect_success 'verify sparse:path=pattern1 omits top-level files' ' - git -C r3 ls-files -s sparse1 sparse2 \ - | awk -f print_2.awk \ - | sort >expected && - git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:path=../pattern1 \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + git -C r3 ls-files -s sparse1 sparse2 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + + git -C r3 rev-list --quiet --objects --filter-print-omitted \ + --filter=sparse:path=../pattern1 HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify sparse:path=pattern2 omits both sparse2 files' ' - git -C r3 ls-files -s sparse2 dir1/sparse2 \ - | awk -f print_2.awk \ - | sort >expected && - git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:path=../pattern2 \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + git -C r3 ls-files -s sparse2 dir1/sparse2 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + + git -C r3 rev-list --quiet --objects --filter-print-omitted \ + --filter=sparse:path=../pattern2 HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed ' # Test sparse:oid=<oid-ish> filter. @@ -173,26 +215,83 @@ test_expect_success 'setup r3 part 2' ' ' test_expect_success 'verify sparse:oid=OID omits top-level files' ' - git -C r3 ls-files -s pattern sparse1 sparse2 \ - | awk -f print_2.awk \ - | sort >expected && + git -C r3 ls-files -s pattern sparse1 sparse2 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + oid=$(git -C r3 ls-files -s pattern | awk -f print_2.awk) && - git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:oid=$oid \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + + git -C r3 rev-list --quiet --objects --filter-print-omitted \ + --filter=sparse:oid=$oid HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed ' test_expect_success 'verify sparse:oid=oid-ish omits top-level files' ' - git -C r3 ls-files -s pattern sparse1 sparse2 \ - | awk -f print_2.awk \ - | sort >expected && - git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:oid=master:pattern \ - | awk -f print_1.awk \ - | sed "s/~//" \ - | sort >observed && - test_cmp observed expected + git -C r3 ls-files -s pattern sparse1 sparse2 >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + + git -C r3 rev-list --quiet --objects --filter-print-omitted \ + --filter=sparse:oid=master:pattern HEAD >revs && + awk -f print_1.awk revs | + sed "s/~//" | + sort >observed && + + test_cmp expected observed +' + +test_expect_success 'rev-list W/ --missing=print and --missing=allow-any for trees' ' + TREE=$(git -C r3 rev-parse HEAD:dir1) && + + # Create a spare repo because we will be deleting objects from this one. + git clone r3 r3.b && + + rm r3.b/.git/objects/$(echo $TREE | sed "s|^..|&/|") && + + git -C r3.b rev-list --quiet --missing=print --objects HEAD \ + >missing_objs 2>rev_list_err && + echo "?$TREE" >expected && + test_cmp expected missing_objs && + + # do not complain when a missing tree cannot be parsed + test_must_be_empty rev_list_err && + + git -C r3.b rev-list --missing=allow-any --objects HEAD \ + >objs 2>rev_list_err && + ! grep $TREE objs && + test_must_be_empty rev_list_err +' + +# Test tree:0 filter. + +test_expect_success 'verify tree:0 includes trees in "filtered" output' ' + git -C r3 rev-list --quiet --objects --filter-print-omitted \ + --filter=tree:0 HEAD >revs && + + awk -f print_1.awk revs | + sed s/~// | + xargs -n1 git -C r3 cat-file -t >unsorted_filtered_types && + + sort -u unsorted_filtered_types >filtered_types && + test_write_lines blob tree >expected && + test_cmp expected filtered_types +' + +# Make sure tree:0 does not iterate through any trees. + +test_expect_success 'filter a GIANT tree through tree:0' ' + GIT_TRACE=1 git -C r3 rev-list \ + --objects --filter=tree:0 HEAD 2>filter_trace && + grep "Skipping contents of tree [.][.][.]" filter_trace >actual && + # One line for each commit traversed. + test_line_count = 2 actual && + + # Make sure no other trees were considered besides the root. + ! grep "Skipping contents of tree [^.]" filter_trace ' # Delete some loose objects and use rev-list, but WITHOUT any filtering. @@ -200,17 +299,21 @@ test_expect_success 'verify sparse:oid=oid-ish omits top-level files' ' test_expect_success 'rev-list W/ --missing=print' ' git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \ - | awk -f print_2.awk \ - | sort >expected && + >ls_files_result && + awk -f print_2.awk ls_files_result | + sort >expected && + for id in `cat expected | sed "s|..|&/|"` do rm r1/.git/objects/$id done && - git -C r1 rev-list --quiet HEAD --missing=print --objects \ - | awk -f print_1.awk \ - | sed "s/?//" \ - | sort >observed && - test_cmp observed expected + + git -C r1 rev-list --quiet --missing=print --objects HEAD >revs && + awk -f print_1.awk revs | + sed "s/?//" | + sort >observed && + + test_cmp expected observed ' test_expect_success 'rev-list W/O --missing fails' ' diff --git a/t/t6132-pathspec-exclude.sh b/t/t6132-pathspec-exclude.sh index eb829fce97..2462b19ddd 100755 --- a/t/t6132-pathspec-exclude.sh +++ b/t/t6132-pathspec-exclude.sh @@ -194,4 +194,21 @@ test_expect_success 'multiple exclusions' ' test_cmp expect actual ' +test_expect_success 't_e_i() exclude case #8' ' + git init case8 && + ( + cd case8 && + echo file >file1 && + echo file >file2 && + git add file1 file2 && + git commit -m twofiles && + git grep -l file HEAD :^file2 >actual && + echo HEAD:file1 >expected && + test_cmp expected actual && + git grep -l file HEAD :^file1 >actual && + echo HEAD:file2 >expected && + test_cmp expected actual + ) +' + test_done diff --git a/t/t6500-gc.sh b/t/t6500-gc.sh index 818435f04e..4684d06552 100755 --- a/t/t6500-gc.sh +++ b/t/t6500-gc.sh @@ -4,6 +4,7 @@ test_description='basic git gc tests ' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-terminal.sh test_expect_success 'setup' ' # do not let the amount of physical memory affects gc @@ -99,6 +100,26 @@ test_expect_success 'auto gc with too many loose objects does not attempt to cre test_line_count = 2 new # There is one new pack and its .idx ' +test_expect_success 'gc --no-quiet' ' + git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && + test_must_be_empty stdout && + test_line_count = 1 stderr && + test_i18ngrep "Computing commit graph generation numbers" stderr +' + +test_expect_success TTY 'with TTY: gc --no-quiet' ' + test_terminal git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && + test_must_be_empty stdout && + test_i18ngrep "Enumerating objects" stderr && + test_i18ngrep "Computing commit graph generation numbers" stderr +' + +test_expect_success 'gc --quiet' ' + git -c gc.writeCommitGraph=true gc --quiet >stdout 2>stderr && + test_must_be_empty stdout && + test_must_be_empty stderr +' + run_and_wait_for_auto_gc () { # We read stdout from gc for the side effect of waiting until the # background gc process exits, closing its fd 9. Furthermore, the @@ -116,11 +137,11 @@ test_expect_success 'background auto gc does not run if gc.log is present and re test_config gc.autopacklimit 1 && test_config gc.autodetach true && echo fleem >.git/gc.log && - test_must_fail git gc --auto 2>err && - test_i18ngrep "^error:" err && + git gc --auto 2>err && + test_i18ngrep "^warning:" err && test_config gc.logexpiry 5.days && test-tool chmtime =-345600 .git/gc.log && - test_must_fail git gc --auto && + git gc --auto && test_config gc.logexpiry 2.days && run_and_wait_for_auto_gc && ls .git/objects/pack/pack-*.pack >packs && diff --git a/t/t6600-test-reach.sh b/t/t6600-test-reach.sh index ae94b27f70..b24d850036 100755 --- a/t/t6600-test-reach.sh +++ b/t/t6600-test-reach.sh @@ -56,18 +56,22 @@ test_expect_success 'setup' ' git config core.commitGraph true ' -test_three_modes () { +run_three_modes () { test_when_finished rm -rf .git/objects/info/commit-graph && - test-tool reach $1 <input >actual && + "$@" <input >actual && test_cmp expect actual && cp commit-graph-full .git/objects/info/commit-graph && - test-tool reach $1 <input >actual && + "$@" <input >actual && test_cmp expect actual && cp commit-graph-half .git/objects/info/commit-graph && - test-tool reach $1 <input >actual && + "$@" <input >actual && test_cmp expect actual } +test_three_modes () { + run_three_modes test-tool reach "$@" +} + test_expect_success 'ref_newer:miss' ' cat >input <<-\EOF && A:commit-5-7 @@ -265,4 +269,140 @@ test_expect_success 'commit_contains:miss' ' test_three_modes commit_contains --tag ' +test_expect_success 'rev-list: basic topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 commit-3-6 commit-2-6 commit-1-6 \ + commit-6-5 commit-5-5 commit-4-5 commit-3-5 commit-2-5 commit-1-5 \ + commit-6-4 commit-5-4 commit-4-4 commit-3-4 commit-2-4 commit-1-4 \ + commit-6-3 commit-5-3 commit-4-3 commit-3-3 commit-2-3 commit-1-3 \ + commit-6-2 commit-5-2 commit-4-2 commit-3-2 commit-2-2 commit-1-2 \ + commit-6-1 commit-5-1 commit-4-1 commit-3-1 commit-2-1 commit-1-1 \ + >expect && + run_three_modes git rev-list --topo-order commit-6-6 +' + +test_expect_success 'rev-list: first-parent topo-order' ' + git rev-parse \ + commit-6-6 \ + commit-6-5 \ + commit-6-4 \ + commit-6-3 \ + commit-6-2 \ + commit-6-1 commit-5-1 commit-4-1 commit-3-1 commit-2-1 commit-1-1 \ + >expect && + run_three_modes git rev-list --first-parent --topo-order commit-6-6 +' + +test_expect_success 'rev-list: range topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 commit-3-6 commit-2-6 commit-1-6 \ + commit-6-5 commit-5-5 commit-4-5 commit-3-5 commit-2-5 commit-1-5 \ + commit-6-4 commit-5-4 commit-4-4 commit-3-4 commit-2-4 commit-1-4 \ + commit-6-3 commit-5-3 commit-4-3 \ + commit-6-2 commit-5-2 commit-4-2 \ + commit-6-1 commit-5-1 commit-4-1 \ + >expect && + run_three_modes git rev-list --topo-order commit-3-3..commit-6-6 +' + +test_expect_success 'rev-list: range topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 \ + commit-6-5 commit-5-5 commit-4-5 \ + commit-6-4 commit-5-4 commit-4-4 \ + commit-6-3 commit-5-3 commit-4-3 \ + commit-6-2 commit-5-2 commit-4-2 \ + commit-6-1 commit-5-1 commit-4-1 \ + >expect && + run_three_modes git rev-list --topo-order commit-3-8..commit-6-6 +' + +test_expect_success 'rev-list: first-parent range topo-order' ' + git rev-parse \ + commit-6-6 \ + commit-6-5 \ + commit-6-4 \ + commit-6-3 \ + commit-6-2 \ + commit-6-1 commit-5-1 commit-4-1 \ + >expect && + run_three_modes git rev-list --first-parent --topo-order commit-3-8..commit-6-6 +' + +test_expect_success 'rev-list: ancestry-path topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 commit-3-6 \ + commit-6-5 commit-5-5 commit-4-5 commit-3-5 \ + commit-6-4 commit-5-4 commit-4-4 commit-3-4 \ + commit-6-3 commit-5-3 commit-4-3 \ + >expect && + run_three_modes git rev-list --topo-order --ancestry-path commit-3-3..commit-6-6 +' + +test_expect_success 'rev-list: symmetric difference topo-order' ' + git rev-parse \ + commit-6-6 commit-5-6 commit-4-6 \ + commit-6-5 commit-5-5 commit-4-5 \ + commit-6-4 commit-5-4 commit-4-4 \ + commit-6-3 commit-5-3 commit-4-3 \ + commit-6-2 commit-5-2 commit-4-2 \ + commit-6-1 commit-5-1 commit-4-1 \ + commit-3-8 commit-2-8 commit-1-8 \ + commit-3-7 commit-2-7 commit-1-7 \ + >expect && + run_three_modes git rev-list --topo-order commit-3-8...commit-6-6 +' + +test_expect_success 'get_reachable_subset:all' ' + cat >input <<-\EOF && + X:commit-9-1 + X:commit-8-3 + X:commit-7-5 + X:commit-6-6 + X:commit-1-7 + Y:commit-3-3 + Y:commit-1-7 + Y:commit-5-6 + EOF + ( + echo "get_reachable_subset(X,Y)" && + git rev-parse commit-3-3 \ + commit-1-7 \ + commit-5-6 | sort + ) >expect && + test_three_modes get_reachable_subset +' + +test_expect_success 'get_reachable_subset:some' ' + cat >input <<-\EOF && + X:commit-9-1 + X:commit-8-3 + X:commit-7-5 + X:commit-1-7 + Y:commit-3-3 + Y:commit-1-7 + Y:commit-5-6 + EOF + ( + echo "get_reachable_subset(X,Y)" && + git rev-parse commit-3-3 \ + commit-1-7 | sort + ) >expect && + test_three_modes get_reachable_subset +' + +test_expect_success 'get_reachable_subset:none' ' + cat >input <<-\EOF && + X:commit-9-1 + X:commit-8-3 + X:commit-7-5 + X:commit-1-7 + Y:commit-9-3 + Y:commit-7-6 + Y:commit-2-8 + EOF + echo "get_reachable_subset(X,Y)" >expect && + test_three_modes get_reachable_subset +' + test_done diff --git a/t/t7005-editor.sh b/t/t7005-editor.sh index b2ca77b338..5fcf281dfb 100755 --- a/t/t7005-editor.sh +++ b/t/t7005-editor.sh @@ -112,7 +112,7 @@ do done test_expect_success 'editor with a space' ' - echo "echo space >\$1" >"e space.sh" && + echo "echo space >\"\$1\"" >"e space.sh" && chmod a+x "e space.sh" && GIT_EDITOR="./e\ space.sh" git commit --amend && test space = "$(git show -s --pretty=format:%s)" diff --git a/t/t7063-status-untracked-cache.sh b/t/t7063-status-untracked-cache.sh index 2da57fce7b..190ae149cf 100755 --- a/t/t7063-status-untracked-cache.sh +++ b/t/t7063-status-untracked-cache.sh @@ -55,7 +55,7 @@ test_expect_success 'setup' ' ' test_expect_success 'untracked cache is empty' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect-empty <<EOF && info/exclude 0000000000000000000000000000000000000000 core.excludesfile 0000000000000000000000000000000000000000 @@ -106,7 +106,7 @@ EOF ' test_expect_success 'untracked cache after first status' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../dump.expect ../actual ' @@ -126,7 +126,7 @@ EOF ' test_expect_success 'untracked cache after second status' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../dump.expect ../actual ' @@ -157,7 +157,7 @@ EOF ' test_expect_success 'verify untracked cache dump' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect <<EOF && info/exclude $EMPTY_BLOB core.excludesfile 0000000000000000000000000000000000000000 @@ -204,7 +204,7 @@ EOF ' test_expect_success 'verify untracked cache dump' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect <<EOF && info/exclude $EMPTY_BLOB core.excludesfile 0000000000000000000000000000000000000000 @@ -248,7 +248,7 @@ EOF ' test_expect_success 'verify untracked cache dump' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect <<EOF && info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 core.excludesfile 0000000000000000000000000000000000000000 @@ -267,7 +267,7 @@ EOF test_expect_success 'move two from tracked to untracked' ' git rm --cached two && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect <<EOF && info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 core.excludesfile 0000000000000000000000000000000000000000 @@ -304,7 +304,7 @@ EOF ' test_expect_success 'verify untracked cache dump' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect <<EOF && info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 core.excludesfile 0000000000000000000000000000000000000000 @@ -324,7 +324,7 @@ EOF test_expect_success 'move two from untracked to tracked' ' git add two && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect <<EOF && info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 core.excludesfile 0000000000000000000000000000000000000000 @@ -361,7 +361,7 @@ EOF ' test_expect_success 'verify untracked cache dump' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect <<EOF && info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 core.excludesfile 0000000000000000000000000000000000000000 @@ -405,7 +405,7 @@ EOF ' test_expect_success 'untracked cache correct after commit' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect <<EOF && info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 core.excludesfile 0000000000000000000000000000000000000000 @@ -464,7 +464,7 @@ EOF ' test_expect_success 'untracked cache correct after status' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect <<EOF && info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 core.excludesfile 0000000000000000000000000000000000000000 @@ -532,7 +532,7 @@ EOF ' test_expect_success 'verify untracked cache dump (sparse/subdirs)' ' - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && cat >../expect-from-test-dump <<EOF && info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 core.excludesfile 0000000000000000000000000000000000000000 @@ -598,66 +598,66 @@ EOF test_expect_success '--no-untracked-cache removes the cache' ' git update-index --no-untracked-cache && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && echo "no untracked cache" >../expect-no-uc && test_cmp ../expect-no-uc ../actual ' test_expect_success 'git status does not change anything' ' git status && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-no-uc ../actual ' test_expect_success 'setting core.untrackedCache to true and using git status creates the cache' ' git config core.untrackedCache true && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-no-uc ../actual && git status && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-from-test-dump ../actual ' test_expect_success 'using --no-untracked-cache does not fail when core.untrackedCache is true' ' git update-index --no-untracked-cache && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-no-uc ../actual && git update-index --untracked-cache && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-empty ../actual ' test_expect_success 'setting core.untrackedCache to false and using git status removes the cache' ' git config core.untrackedCache false && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-empty ../actual && git status && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-no-uc ../actual ' test_expect_success 'using --untracked-cache does not fail when core.untrackedCache is false' ' git update-index --untracked-cache && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-empty ../actual ' test_expect_success 'setting core.untrackedCache to keep' ' git config core.untrackedCache keep && git update-index --untracked-cache && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-empty ../actual && git status && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-from-test-dump ../actual && git update-index --no-untracked-cache && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-no-uc ../actual && git update-index --force-untracked-cache && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-empty ../actual && git status && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && test_cmp ../expect-from-test-dump ../actual ' @@ -671,23 +671,23 @@ test_expect_success 'test ident field is working' ' test_expect_success 'untracked cache survives a checkout' ' git commit --allow-empty -m empty && - test-dump-untracked-cache >../before && + test-tool dump-untracked-cache >../before && test_when_finished "git checkout master" && git checkout -b other_branch && - test-dump-untracked-cache >../after && + test-tool dump-untracked-cache >../after && test_cmp ../before ../after && test_commit test && - test-dump-untracked-cache >../before && + test-tool dump-untracked-cache >../before && git checkout master && - test-dump-untracked-cache >../after && + test-tool dump-untracked-cache >../after && test_cmp ../before ../after ' test_expect_success 'untracked cache survives a commit' ' - test-dump-untracked-cache >../before && + test-tool dump-untracked-cache >../before && git add done/two && git commit -m commit && - test-dump-untracked-cache >../after && + test-tool dump-untracked-cache >../after && test_cmp ../before ../after ' @@ -751,7 +751,7 @@ test_expect_success '"status" after file replacement should be clean with UC=tru git checkout master && avoid_racy && status_is_clean && - test-dump-untracked-cache >../actual && + test-tool dump-untracked-cache >../actual && grep -F "recurse valid" ../actual >../actual.grep && cat >../expect.grep <<EOF && / 0000000000000000000000000000000000000000 recurse valid diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 324933acfe..72b9b375ba 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -160,7 +160,7 @@ test_expect_success 'checkout -m with merge conflict' ' git diff master:one :3:uno | sed -e "1,/^@@/d" -e "/^ /d" -e "s/^-/d/" -e "s/^+/a/" >current && fill d2 aT d7 aS >expect && - test_cmp current expect && + test_cmp expect current && git diff --cached two >current && test_must_be_empty current ' @@ -174,7 +174,7 @@ test_expect_success 'format of merge conflict from checkout -m' ' git ls-files >current && fill same two two two >expect && - test_cmp current expect && + test_cmp expect current && cat <<-EOF >expect && <<<<<<< simple @@ -254,9 +254,9 @@ test_expect_success 'checkout to detach HEAD (with advice declined)' ' test_expect_success 'checkout to detach HEAD' ' git config advice.detachedHead true && git checkout -f renamer && git clean -f && - git checkout renamer^ 2>messages && - test_i18ngrep "HEAD is now at 7329388" messages && - (test_line_count -gt 1 messages || test -n "$GETTEXT_POISON") && + GIT_TEST_GETTEXT_POISON= git checkout renamer^ 2>messages && + grep "HEAD is now at 7329388" messages && + test_line_count -gt 1 messages && H=$(git rev-parse --verify HEAD) && M=$(git show-ref -s --verify refs/heads/master) && test "z$H" = "z$M" && diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index c0ffc1022a..76a7cb0af7 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -1224,6 +1224,30 @@ test_expect_success 'submodule update and setting submodule.<name>.active' ' test_cmp expect actual ' +test_expect_success 'clone active submodule without submodule url set' ' + test_when_finished "rm -rf test/test" && + mkdir test && + # another dir breaks accidental relative paths still being correct + git clone file://"$pwd"/multisuper test/test && + ( + cd test/test && + git config submodule.active "." && + + # do not pass --init flag, as the submodule is already active: + git submodule update && + git submodule status >actual_raw && + + cut -c 1,43- actual_raw >actual && + cat >expect <<-\EOF && + sub0 (test2) + sub1 (test2) + sub2 (test2) + sub3 (test2) + EOF + test_cmp expect actual + ) +' + test_expect_success 'clone --recurse-submodules with a pathspec works' ' test_when_finished "rm -rf multisuper_clone" && cat >expected <<-\EOF && diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index 10dc91620a..e87164aa8f 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -789,7 +789,7 @@ test_expect_success 'submodule add places git-dir in superprojects git-dir' ' (cd .git/modules/deeper/submodule && git log > ../../../../actual ) && - test_cmp actual expected + test_cmp expected actual ) ' @@ -807,7 +807,7 @@ test_expect_success 'submodule update places git-dir in superprojects git-dir' ' (cd .git/modules/deeper/submodule && git log > ../../../../actual ) && - test_cmp actual expected + test_cmp expected actual ) ' @@ -827,7 +827,7 @@ test_expect_success 'submodule add places git-dir in superprojects git-dir recur git add deeper/submodule && git commit -m "update submodule" && git push origin : && - test_cmp actual expected + test_cmp expected actual ) ' @@ -874,7 +874,7 @@ test_expect_success 'submodule update places git-dir in superprojects git-dir re (cd .git/modules/submodule/modules/subsubmodule && git log > ../../../../../actual ) && - test_cmp actual expected + test_cmp expected actual ) ' diff --git a/t/t7411-submodule-config.sh b/t/t7411-submodule-config.sh index 0bde5850ac..89690b7adb 100755 --- a/t/t7411-submodule-config.sh +++ b/t/t7411-submodule-config.sh @@ -82,29 +82,23 @@ Submodule name: 'a' for path 'b' Submodule name: 'submodule' for path 'submodule' EOF -test_expect_success 'error in one submodule config lets continue' ' +test_expect_success 'error in history of one submodule config lets continue, stderr message contains blob ref' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && (cd super && cp .gitmodules .gitmodules.bak && echo " value = \"" >>.gitmodules && git add .gitmodules && mv .gitmodules.bak .gitmodules && git commit -m "add error" && - test-tool submodule-config \ - HEAD b \ - HEAD submodule \ - >actual && - test_cmp expect_error actual - ) -' - -test_expect_success 'error message contains blob reference' ' - (cd super && sha1=$(git rev-parse HEAD) && test-tool submodule-config \ HEAD b \ HEAD submodule \ - 2>actual_err && - test_i18ngrep "submodule-blob $sha1:.gitmodules" actual_err >/dev/null + >actual \ + 2>actual_stderr && + test_cmp expect_error actual && + test_i18ngrep "submodule-blob $sha1:.gitmodules" actual_stderr >/dev/null ) ' @@ -123,6 +117,8 @@ test_expect_success 'using different treeishs works' ' ' test_expect_success 'error in history in fetchrecursesubmodule lets continue' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && (cd super && git config -f .gitmodules \ submodule.submodule.fetchrecursesubmodules blabla && @@ -134,8 +130,123 @@ test_expect_success 'error in history in fetchrecursesubmodule lets continue' ' HEAD b \ HEAD submodule \ >actual && - test_cmp expect_error actual && - git reset --hard HEAD^ + test_cmp expect_error actual + ) +' + +test_expect_success 'reading submodules config from the working tree with "submodule--helper config"' ' + (cd super && + echo "../submodule" >expect && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'writing submodules config with "submodule--helper config"' ' + (cd super && + echo "new_url" >expect && + git submodule--helper config submodule.submodule.url "new_url" && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'overwriting unstaged submodules config with "submodule--helper config"' ' + test_when_finished "git -C super checkout .gitmodules" && + (cd super && + echo "newer_url" >expect && + git submodule--helper config submodule.submodule.url "newer_url" && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'writeable .gitmodules when it is in the working tree' ' + git -C super submodule--helper config --check-writeable +' + +test_expect_success 'writeable .gitmodules when it is nowhere in the repository' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && + (cd super && + git rm .gitmodules && + git commit -m "remove .gitmodules from the current branch" && + git submodule--helper config --check-writeable + ) +' + +test_expect_success 'non-writeable .gitmodules when it is in the index but not in the working tree' ' + test_when_finished "git -C super checkout .gitmodules" && + (cd super && + rm -f .gitmodules && + test_must_fail git submodule--helper config --check-writeable + ) +' + +test_expect_success 'non-writeable .gitmodules when it is in the current branch but not in the index' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && + (cd super && + git rm .gitmodules && + test_must_fail git submodule--helper config --check-writeable + ) +' + +test_expect_success 'reading submodules config from the index when .gitmodules is not in the working tree' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && + (cd super && + git submodule--helper config submodule.submodule.url "staged_url" && + git add .gitmodules && + rm -f .gitmodules && + echo "staged_url" >expect && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'reading submodules config from the current branch when .gitmodules is not in the index' ' + ORIG=$(git -C super rev-parse HEAD) && + test_when_finished "git -C super reset --hard $ORIG" && + (cd super && + git rm .gitmodules && + echo "../submodule" >expect && + git submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual + ) +' + +test_expect_success 'reading nested submodules config' ' + (cd super && + git init submodule/nested_submodule && + echo "a" >submodule/nested_submodule/a && + git -C submodule/nested_submodule add a && + git -C submodule/nested_submodule commit -m "add a" && + git -C submodule submodule add ./nested_submodule && + git -C submodule add nested_submodule && + git -C submodule commit -m "added nested_submodule" && + git add submodule && + git commit -m "updated submodule" && + echo "./nested_submodule" >expect && + test-tool submodule-nested-repo-config \ + submodule submodule.nested_submodule.url >actual && + test_cmp expect actual + ) +' + +# When this test eventually passes, before turning it into +# test_expect_success, remember to replace the test_i18ngrep below with +# a "test_must_be_empty warning" to be sure that the warning is actually +# removed from the code. +test_expect_failure 'reading nested submodules config when .gitmodules is not in the working tree' ' + test_when_finished "git -C super/submodule checkout .gitmodules" && + (cd super && + echo "./nested_submodule" >expect && + rm submodule/.gitmodules && + test-tool submodule-nested-repo-config \ + submodule submodule.nested_submodule.url >actual 2>warning && + test_i18ngrep "nested submodules without %s in the working tree are not supported yet" warning && + test_cmp expect actual ) ' diff --git a/t/t7418-submodule-sparse-gitmodules.sh b/t/t7418-submodule-sparse-gitmodules.sh new file mode 100755 index 0000000000..3f7f271883 --- /dev/null +++ b/t/t7418-submodule-sparse-gitmodules.sh @@ -0,0 +1,122 @@ +#!/bin/sh +# +# Copyright (C) 2018 Antonio Ospite <ao2@ao2.it> +# + +test_description='Test reading/writing .gitmodules when not in the working tree + +This test verifies that, when .gitmodules is in the current branch but is not +in the working tree reading from it still works but writing to it does not. + +The test setup uses a sparse checkout, however the same scenario can be set up +also by committing .gitmodules and then just removing it from the filesystem. +' + +. ./test-lib.sh + +test_expect_success 'sparse checkout setup which hides .gitmodules' ' + git init upstream && + git init submodule && + (cd submodule && + echo file >file && + git add file && + test_tick && + git commit -m "Add file" + ) && + (cd upstream && + git submodule add ../submodule && + test_tick && + git commit -m "Add submodule" + ) && + git clone upstream super && + (cd super && + cat >.git/info/sparse-checkout <<-\EOF && + /* + !/.gitmodules + EOF + git config core.sparsecheckout true && + git read-tree -m -u HEAD && + test_path_is_missing .gitmodules + ) +' + +test_expect_success 'reading gitmodules config file when it is not checked out' ' + echo "../submodule" >expect && + git -C super submodule--helper config submodule.submodule.url >actual && + test_cmp expect actual +' + +test_expect_success 'not writing gitmodules config file when it is not checked out' ' + test_must_fail git -C super submodule--helper config submodule.submodule.url newurl && + test_path_is_missing super/.gitmodules +' + +test_expect_success 'initialising submodule when the gitmodules config is not checked out' ' + test_must_fail git -C super config submodule.submodule.url && + git -C super submodule init && + git -C super config submodule.submodule.url >actual && + echo "$(pwd)/submodule" >expect && + test_cmp expect actual +' + +test_expect_success 'updating submodule when the gitmodules config is not checked out' ' + test_path_is_missing super/submodule/file && + git -C super submodule update && + test_cmp submodule/file super/submodule/file +' + +ORIG_SUBMODULE=$(git -C submodule rev-parse HEAD) +ORIG_UPSTREAM=$(git -C upstream rev-parse HEAD) +ORIG_SUPER=$(git -C super rev-parse HEAD) + +test_expect_success 're-updating submodule when the gitmodules config is not checked out' ' + test_when_finished "git -C submodule reset --hard $ORIG_SUBMODULE; + git -C upstream reset --hard $ORIG_UPSTREAM; + git -C super reset --hard $ORIG_SUPER; + git -C upstream submodule update --remote; + git -C super pull; + git -C super submodule update --remote" && + (cd submodule && + echo file2 >file2 && + git add file2 && + test_tick && + git commit -m "Add file2 to submodule" + ) && + (cd upstream && + git submodule update --remote && + git add submodule && + test_tick && + git commit -m "Update submodule" + ) && + git -C super pull && + # The --for-status options reads the gitmodules config + git -C super submodule summary --for-status >actual && + rev1=$(git -C submodule rev-parse --short HEAD) && + rev2=$(git -C submodule rev-parse --short HEAD^) && + cat >expect <<-EOF && + * submodule ${rev1}...${rev2} (1): + < Add file2 to submodule + + EOF + test_cmp expect actual && + # Test that the update actually succeeds + test_path_is_missing super/submodule/file2 && + git -C super submodule update && + test_cmp submodule/file2 super/submodule/file2 && + git -C super status --short >output && + test_must_be_empty output +' + +test_expect_success 'not adding submodules when the gitmodules config is not checked out' ' + git clone submodule new_submodule && + test_must_fail git -C super submodule add ../new_submodule && + test_path_is_missing .gitmodules +' + +# This test checks that the previous "git submodule add" did not leave the +# repository in a spurious state when it failed. +test_expect_success 'init submodule still works even after the previous add failed' ' + git -C super submodule init +' + +test_done diff --git a/t/t7500-commit.sh b/t/t7500-commit-template-squash-signoff.sh index 170b4810e0..46a5cd4b73 100755 --- a/t/t7500-commit.sh +++ b/t/t7500-commit-template-squash-signoff.sh @@ -5,7 +5,7 @@ test_description='git commit -Tests for selected commit options.' +Tests for template, signoff, squash and -F functions.' . ./test-lib.sh @@ -359,4 +359,27 @@ test_expect_success 'new line found before status message in commit template' ' test_i18ncmp expected-template editor-input ' +test_expect_success 'setup empty commit with unstaged rename and copy' ' + test_create_repo unstaged_rename_and_copy && + ( + cd unstaged_rename_and_copy && + + echo content >orig && + git add orig && + test_commit orig && + + cp orig new_copy && + mv orig new_rename && + git add -N new_copy new_rename + ) +' + +test_expect_success 'check commit with unstaged rename and copy' ' + ( + cd unstaged_rename_and_copy && + + test_must_fail git -c diff.renames=copy commit + ) +' + test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit-basic-functionality.sh index 1a6773ee68..f1349af56e 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit-basic-functionality.sh @@ -99,12 +99,12 @@ test_expect_success '--dry-run with stuff to commit returns ok' ' git commit -m next -a --dry-run ' -test_expect_failure '--short with stuff to commit returns ok' ' +test_expect_success '--short with stuff to commit returns ok' ' echo bongo bongo bongo >>file && git commit -m next -a --short ' -test_expect_failure '--porcelain with stuff to commit returns ok' ' +test_expect_success '--porcelain with stuff to commit returns ok' ' echo bongo bongo bongo >>file && git commit -m next -a --porcelain ' @@ -698,4 +698,10 @@ test_expect_success '--dry-run with conflicts fixed from a merge' ' git commit -m "conflicts fixed from merge." ' +test_expect_success '--dry-run --short' ' + >test-file && + git add test-file && + git commit --dry-run --short +' + test_done diff --git a/t/t7502-commit.sh b/t/t7502-commit-porcelain.sh index ca4a740da0..ca4a740da0 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit-porcelain.sh diff --git a/t/t7505-prepare-commit-msg-hook.sh b/t/t7505-prepare-commit-msg-hook.sh index 1f43b3cd4c..ebfcad9c4c 100755 --- a/t/t7505-prepare-commit-msg-hook.sh +++ b/t/t7505-prepare-commit-msg-hook.sh @@ -253,7 +253,7 @@ test_rebase () { } test_rebase success -i -test_rebase success -p +test_have_prereq !REBASE_P || test_rebase success -p test_expect_success 'with hook (cherry-pick)' ' test_when_finished "git checkout -f master" && diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh index 943708fb04..08629a6e70 100755 --- a/t/t7506-status-submodule.sh +++ b/t/t7506-status-submodule.sh @@ -325,7 +325,8 @@ test_expect_success 'setup superproject with untracked file in nested submodule' ( cd super && git clean -dfx && - rm .gitmodules && + git rm .gitmodules && + git commit -m "remove .gitmodules" && git submodule add -f ./sub1 && git submodule add -f ./sub2 && git submodule add -f ./sub1 sub3 && diff --git a/t/t7509-commit.sh b/t/t7509-commit-authorship.sh index ddef7ea6b0..500ab2fe72 100755 --- a/t/t7509-commit.sh +++ b/t/t7509-commit-authorship.sh @@ -3,7 +3,7 @@ # Copyright (c) 2009 Erick Mattos # -test_description='git commit --reset-author' +test_description='commit tests of various authorhip options. ' . ./test-lib.sh diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 4e37ff8f16..86d3f93fa2 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -175,8 +175,10 @@ test_expect_success GPG 'show good signature with custom format' ' G 13B6F51ECDDE430D C O Mitter <committer@example.com> + 73D758744BE721698EC54E8713B6F51ECDDE430D + 73D758744BE721698EC54E8713B6F51ECDDE430D EOF - git log -1 --format="%G?%n%GK%n%GS" sixth-signed >actual && + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" sixth-signed >actual && test_cmp expect actual ' @@ -185,28 +187,34 @@ test_expect_success GPG 'show bad signature with custom format' ' B 13B6F51ECDDE430D C O Mitter <committer@example.com> + + EOF - git log -1 --format="%G?%n%GK%n%GS" $(cat forged1.commit) >actual && + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" $(cat forged1.commit) >actual && test_cmp expect actual ' test_expect_success GPG 'show untrusted signature with custom format' ' cat >expect <<-\EOF && U - 61092E85B7227189 + 65A0EEA02E30CAD7 Eris Discordia <discord@example.net> + F8364A59E07FFE9F4D63005A65A0EEA02E30CAD7 + D4BE22311AD3131E5EDA29A461092E85B7227189 EOF - git log -1 --format="%G?%n%GK%n%GS" eighth-signed-alt >actual && + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" eighth-signed-alt >actual && test_cmp expect actual ' test_expect_success GPG 'show unknown signature with custom format' ' cat >expect <<-\EOF && E - 61092E85B7227189 + 65A0EEA02E30CAD7 + + EOF - GNUPGHOME="$GNUPGHOME_NOT_USED" git log -1 --format="%G?%n%GK%n%GS" eighth-signed-alt >actual && + GNUPGHOME="$GNUPGHOME_NOT_USED" git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" eighth-signed-alt >actual && test_cmp expect actual ' @@ -215,8 +223,10 @@ test_expect_success GPG 'show lack of signature with custom format' ' N + + EOF - git log -1 --format="%G?%n%GK%n%GS" seventh-unsigned >actual && + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" seventh-unsigned >actual && test_cmp expect actual ' @@ -234,4 +244,32 @@ test_expect_success GPG 'check config gpg.format values' ' test_must_fail git commit -S --amend -m "fail" ' +test_expect_success GPG 'detect fudged commit with double signature' ' + sed -e "/gpgsig/,/END PGP/d" forged1 >double-base && + sed -n -e "/gpgsig/,/END PGP/p" forged1 | \ + sed -e "s/^gpgsig//;s/^ //" | gpg --dearmor >double-sig1.sig && + gpg -o double-sig2.sig -u 29472784 --detach-sign double-base && + cat double-sig1.sig double-sig2.sig | gpg --enarmor >double-combined.asc && + sed -e "s/^\(-.*\)ARMORED FILE/\1SIGNATURE/;1s/^/gpgsig /;2,\$s/^/ /" \ + double-combined.asc > double-gpgsig && + sed -e "/committer/r double-gpgsig" double-base >double-commit && + git hash-object -w -t commit double-commit >double-commit.commit && + test_must_fail git verify-commit $(cat double-commit.commit) && + git show --pretty=short --show-signature $(cat double-commit.commit) >double-actual && + grep "BAD signature from" double-actual && + grep "Good signature from" double-actual +' + +test_expect_success GPG 'show double signature with custom format' ' + cat >expect <<-\EOF && + E + + + + + EOF + git log -1 --format="%G?%n%GK%n%GS%n%GF%n%GP" $(cat double-commit.commit) >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7517-per-repo-email.sh b/t/t7517-per-repo-email.sh index 2a22fa7588..231b8cc19d 100755 --- a/t/t7517-per-repo-email.sh +++ b/t/t7517-per-repo-email.sh @@ -72,12 +72,14 @@ test_expect_success 'noop interactive rebase does not care about ident' ' git rebase -i HEAD^ ' -test_expect_success 'fast-forward rebase does not care about ident (preserve)' ' +test_expect_success REBASE_P \ + 'fast-forward rebase does not care about ident (preserve)' ' git checkout -B tmp side-without-commit && git rebase -p master ' -test_expect_success 'non-fast-forward rebase refuses to write commits (preserve)' ' +test_expect_success REBASE_P \ + 'non-fast-forward rebase refuses to write commits (preserve)' ' test_when_finished "git rebase --abort || true" && git checkout -B tmp side-with-commit && test_must_fail git rebase -p master diff --git a/t/t7519-status-fsmonitor.sh b/t/t7519-status-fsmonitor.sh index 756beb0d8e..3e0a61db23 100755 --- a/t/t7519-status-fsmonitor.sh +++ b/t/t7519-status-fsmonitor.sh @@ -4,13 +4,6 @@ test_description='git status with file system watcher' . ./test-lib.sh -# -# To run the entire git test suite using fsmonitor: -# -# copy t/t7519/fsmonitor-all to a location in your path and then set -# GIT_FSMONITOR_TEST=fsmonitor-all and run your tests. -# - # Note, after "git reset --hard HEAD" no extensions exist other than 'TREE' # "git update-index --fsmonitor" can be used to get the extension written # before testing the results. @@ -84,21 +77,21 @@ test_expect_success 'setup' ' # test that the fsmonitor extension is off by default test_expect_success 'fsmonitor extension is off by default' ' - test-dump-fsmonitor >actual && + test-tool dump-fsmonitor >actual && grep "^no fsmonitor" actual ' # test that "update-index --fsmonitor" adds the fsmonitor extension test_expect_success 'update-index --fsmonitor" adds the fsmonitor extension' ' git update-index --fsmonitor && - test-dump-fsmonitor >actual && + test-tool dump-fsmonitor >actual && grep "^fsmonitor last update" actual ' # test that "update-index --no-fsmonitor" removes the fsmonitor extension test_expect_success 'update-index --no-fsmonitor" removes the fsmonitor extension' ' git update-index --no-fsmonitor && - test-dump-fsmonitor >actual && + test-tool dump-fsmonitor >actual && grep "^no fsmonitor" actual ' @@ -245,9 +238,9 @@ do git config core.preloadIndex $preload_val && if test $preload_val = true then - GIT_FORCE_PRELOAD_TEST=$preload_val; export GIT_FORCE_PRELOAD_TEST + GIT_TEST_PRELOAD_INDEX=$preload_val; export GIT_TEST_PRELOAD_INDEX else - unset GIT_FORCE_PRELOAD_TEST + sane_unset GIT_TEST_PRELOAD_INDEX fi ' @@ -307,9 +300,9 @@ test_expect_success 'splitting the index results in the same state' ' dirty_repo && git update-index --fsmonitor && git ls-files -f >expect && - test-dump-fsmonitor >&2 && echo && + test-tool dump-fsmonitor >&2 && echo && git update-index --fsmonitor --split-index && - test-dump-fsmonitor >&2 && echo && + test-tool dump-fsmonitor >&2 && echo && git ls-files -f >actual && test_cmp expect actual ' @@ -333,7 +326,7 @@ test_expect_success UNTRACKED_CACHE 'ignore .git changes when invalidating UNTR' git update-index --fsmonitor && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace-before" \ git status && - test-dump-untracked-cache >../before + test-tool dump-untracked-cache >../before ) && cat >>dot-git/.git/hooks/fsmonitor-test <<-\EOF && printf ".git\0" @@ -345,7 +338,7 @@ test_expect_success UNTRACKED_CACHE 'ignore .git changes when invalidating UNTR' cd dot-git && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace-after" \ git status && - test-dump-untracked-cache >../after + test-tool dump-untracked-cache >../after ) && grep "directory invalidation" trace-before >>before && grep "directory invalidation" trace-after >>after && diff --git a/t/t7612-merge-verify-signatures.sh b/t/t7612-merge-verify-signatures.sh index e2b1df817a..d99218a725 100755 --- a/t/t7612-merge-verify-signatures.sh +++ b/t/t7612-merge-verify-signatures.sh @@ -103,4 +103,11 @@ test_expect_success GPG 'merge commit with bad signature with merge.verifySignat git merge --no-verify-signatures $(cat forged.commit) ' +test_expect_success GPG 'merge unsigned commit into unborn branch' ' + test_when_finished "git checkout initial" && + git checkout --orphan unborn && + test_must_fail git merge --verify-signatures side-unsigned 2>mergeerror && + test_i18ngrep "does not have a GPG signature" mergeerror +' + test_done diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 668bbee73c..22b9199d59 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -332,7 +332,7 @@ test_expect_success 'difftool --extcmd cat arg1' ' test_expect_success 'difftool --extcmd cat arg2' ' echo branch >expect && git difftool --no-prompt \ - --extcmd sh\ -c\ \"cat\ \$2\" branch >actual && + --extcmd sh\ -c\ \"cat\ \\\"\$2\\\"\" branch >actual && test_cmp expect actual ' @@ -557,7 +557,7 @@ test_expect_success SYMLINKS 'difftool --dir-diff --symlink without unstaged cha EOF git difftool --dir-diff --symlink \ --extcmd "./.git/CHECK_SYMLINKS" branch HEAD && - test_cmp actual expect + test_cmp expect actual ' write_script modify-right-file <<\EOF diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index be5c1bd553..43aa4161cf 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -309,6 +309,8 @@ do echo ${HC}v:1:vvv } >expected && git grep --max-depth -1 -n -e vvv $H >actual && + test_cmp expected actual && + git grep --recursive -n -e vvv $H >actual && test_cmp expected actual ' @@ -317,6 +319,8 @@ do echo ${HC}v:1:vvv } >expected && git grep --max-depth 0 -n -e vvv $H >actual && + test_cmp expected actual && + git grep --no-recursive -n -e vvv $H >actual && test_cmp expected actual ' @@ -327,6 +331,8 @@ do echo ${HC}v:1:vvv } >expected && git grep --max-depth 0 -n -e vvv $H -- "*" >actual && + test_cmp expected actual && + git grep --no-recursive -n -e vvv $H -- "*" >actual && test_cmp expected actual ' @@ -344,6 +350,8 @@ do echo ${HC}t/v:1:vvv } >expected && git grep --max-depth 0 -n -e vvv $H -- t >actual && + test_cmp expected actual && + git grep --no-recursive -n -e vvv $H -- t >actual && test_cmp expected actual ' @@ -353,6 +361,8 @@ do echo ${HC}v:1:vvv } >expected && git grep --max-depth 0 -n -e vvv $H -- . t >actual && + test_cmp expected actual && + git grep --no-recursive -n -e vvv $H -- . t >actual && test_cmp expected actual ' @@ -362,6 +372,8 @@ do echo ${HC}v:1:vvv } >expected && git grep --max-depth 0 -n -e vvv $H -- t . >actual && + test_cmp expected actual && + git grep --no-recursive -n -e vvv $H -- t . >actual && test_cmp expected actual ' test_expect_success "grep $L with grep.extendedRegexp=false" ' diff --git a/t/t7814-grep-recurse-submodules.sh b/t/t7814-grep-recurse-submodules.sh index 7184113b9b..fa475d52fa 100755 --- a/t/t7814-grep-recurse-submodules.sh +++ b/t/t7814-grep-recurse-submodules.sh @@ -380,4 +380,20 @@ test_expect_success 'grep --recurse-submodules should pass the pattern type alon fi ' +# Recursing down into nested submodules which do not have .gitmodules in their +# working tree does not work yet. This is because config_from_gitmodules() +# uses get_oid() and the latter is still not able to get objects from an +# arbitrary repository (the nested submodule, in this case). +test_expect_failure 'grep --recurse-submodules with submodules without .gitmodules in the working tree' ' + test_when_finished "git -C submodule checkout .gitmodules" && + rm submodule/.gitmodules && + git grep --recurse-submodules -e "(.|.)[\d]" >actual && + cat >expect <<-\EOF && + a:(1|2)d(3|4) + submodule/a:(1|2)d(3|4) + submodule/sub/a:(1|2)d(3|4) + EOF + test_cmp expect actual +' + test_done diff --git a/t/t8002-blame.sh b/t/t8002-blame.sh index 380e1c1054..eea048e52c 100755 --- a/t/t8002-blame.sh +++ b/t/t8002-blame.sh @@ -118,4 +118,8 @@ test_expect_success '--no-abbrev works like --abbrev=40' ' check_abbrev 40 --no-abbrev ' +test_expect_success '--exclude-promisor-objects does not BUG-crash' ' + test_must_fail git blame --exclude-promisor-objects one +' + test_done diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 1ef1a19003..ee1efcc59d 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -492,6 +492,21 @@ do --validate \ $patches longline.patch ' + +done + +for enc in 7bit 8bit quoted-printable base64 +do + test_expect_success $PREREQ "--transfer-encoding=$enc produces correct header" ' + clean_fake_sendmail && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + --transfer-encoding=$enc \ + $patches && + grep "Content-Transfer-Encoding: $enc" msgtxt1 + ' done test_expect_success $PREREQ 'Invalid In-Reply-To' ' diff --git a/t/t9100-git-svn-basic.sh b/t/t9100-git-svn-basic.sh index 9af6078844..2c309a57d9 100755 --- a/t/t9100-git-svn-basic.sh +++ b/t/t9100-git-svn-basic.sh @@ -221,7 +221,7 @@ tree d667270a1f7b109f5eb3aaea21ede14b56bfdd6e tree 8f51f74cf0163afc9ad68a4b1537288c4558b5a4 EOF -test_expect_success POSIXPERM,SYMLINKS "$name" "test_cmp a expected" +test_expect_success POSIXPERM,SYMLINKS "$name" "test_cmp expected a" test_expect_success 'exit if remote refs are ambigious' ' git config --add svn-remote.svn.fetch \ diff --git a/t/t9101-git-svn-props.sh b/t/t9101-git-svn-props.sh index 8a5c8dc1aa..c26c4b0927 100755 --- a/t/t9101-git-svn-props.sh +++ b/t/t9101-git-svn-props.sh @@ -174,7 +174,8 @@ test_expect_success 'test create-ignore' " cmp ./deeply/.gitignore create-ignore.expect && cmp ./deeply/nested/.gitignore create-ignore.expect && cmp ./deeply/nested/directory/.gitignore create-ignore.expect && - git ls-files -s | grep gitignore | cmp - create-ignore-index.expect + git ls-files -s >ls_files_result && + grep gitignore ls_files_result | cmp - create-ignore-index.expect " cat >prop.expect <<\EOF @@ -189,17 +190,21 @@ EOF # This test can be improved: since all the svn:ignore contain the same # pattern, it can pass even though the propget did not execute on the # right directory. -test_expect_success 'test propget' " - git svn propget svn:ignore . | cmp - prop.expect && +test_expect_success 'test propget' ' + test_propget () { + git svn propget $1 $2 >actual && + cmp $3 actual + } && + test_propget svn:ignore . prop.expect && cd deeply && - git svn propget svn:ignore . | cmp - ../prop.expect && - git svn propget svn:entry:committed-rev nested/directory/.keep \ - | cmp - ../prop2.expect && - git svn propget svn:ignore .. | cmp - ../prop.expect && - git svn propget svn:ignore nested/ | cmp - ../prop.expect && - git svn propget svn:ignore ./nested | cmp - ../prop.expect && - git svn propget svn:ignore .././deeply/nested | cmp - ../prop.expect - " + test_propget svn:ignore . ../prop.expect && + test_propget svn:entry:committed-rev nested/directory/.keep \ + ../prop2.expect && + test_propget svn:ignore .. ../prop.expect && + test_propget svn:ignore nested/ ../prop.expect && + test_propget svn:ignore ./nested ../prop.expect && + test_propget svn:ignore .././deeply/nested ../prop.expect + ' cat >prop.expect <<\EOF Properties on '.': @@ -218,8 +223,11 @@ Properties on 'nested/directory/.keep': EOF test_expect_success 'test proplist' " - git svn proplist . | cmp - prop.expect && - git svn proplist nested/directory/.keep | cmp - prop2.expect + git svn proplist . >actual && + cmp prop.expect actual && + + git svn proplist nested/directory/.keep >actual && + cmp prop2.expect actual " test_done diff --git a/t/t9133-git-svn-nested-git-repo.sh b/t/t9133-git-svn-nested-git-repo.sh index f3c30e63b7..f894860867 100755 --- a/t/t9133-git-svn-nested-git-repo.sh +++ b/t/t9133-git-svn-nested-git-repo.sh @@ -45,7 +45,7 @@ test_expect_success 'update git svn-cloned repo' ' git svn rebase && echo a > expect && echo b >> expect && - test_cmp a expect && + test_cmp expect a && rm expect ) ' @@ -69,7 +69,7 @@ test_expect_success 'update git svn-cloned repo' ' git svn rebase && echo a > expect && echo b >> expect && - test_cmp a expect && + test_cmp expect a && rm expect ) ' @@ -93,7 +93,7 @@ test_expect_success 'update git svn-cloned repo again' ' echo a > expect && echo b >> expect && echo c >> expect && - test_cmp a expect && + test_cmp expect a && rm expect ) ' diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 40fe7e4976..59a13b6a77 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -1558,7 +1558,7 @@ test_expect_success 'O: blank lines not necessary after other commands' ' INPUT_END git fast-import <input && - test 8 = $(find .git/objects/pack -type f | wc -l) && + test 8 = $(find .git/objects/pack -type f | grep -v multi-pack-index | wc -l) && test $(git rev-parse refs/tags/O3-2nd) = $(git rev-parse O3^) && git log --reverse --pretty=oneline O3 | sed s/^.*z// >actual && test_cmp expect actual diff --git a/t/t9600-cvsimport.sh b/t/t9600-cvsimport.sh index 5dfee07d9a..251fdd66c4 100755 --- a/t/t9600-cvsimport.sh +++ b/t/t9600-cvsimport.sh @@ -148,7 +148,7 @@ test_expect_success PERL 'import from a CVS working tree' ' git cvsimport -a -z0 && echo 1 >expect && git log -1 --pretty=format:%s%n >actual && - test_cmp actual expect + test_cmp expect actual ) ' diff --git a/t/t9603-cvsimport-patchsets.sh b/t/t9603-cvsimport-patchsets.sh index c4c3c49546..3e64b11eac 100755 --- a/t/t9603-cvsimport-patchsets.sh +++ b/t/t9603-cvsimport-patchsets.sh @@ -29,11 +29,11 @@ test_expect_failure PERL 'import with criss cross times on revisions' ' Rev 3 Rev 2 Rev 1" > expect-master && - test_cmp actual-master expect-master && + test_cmp expect-master actual-master && echo "Rev 5 Branch A Wed Mar 11 19:09:10 2009 +0000 Rev 4 Branch A Wed Mar 11 19:03:52 2009 +0000" > expect-A && - test_cmp actual-A expect-A + test_cmp expect-A actual-A ' test_done diff --git a/t/t9604-cvsimport-timestamps.sh b/t/t9604-cvsimport-timestamps.sh index a4b3db24bd..2ff4aa932d 100755 --- a/t/t9604-cvsimport-timestamps.sh +++ b/t/t9604-cvsimport-timestamps.sh @@ -31,7 +31,7 @@ test_expect_success PERL 'check timestamps are UTC (TZ=CST6CDT)' ' Rev 2 2005-02-01 00:00:00 +0000 Rev 1 2005-01-01 00:00:00 +0000 EOF - test_cmp actual-1 expect-1 + test_cmp expect-1 actual-1 ' test_expect_success PERL 'check timestamps with author-specific timezones' ' @@ -65,7 +65,7 @@ test_expect_success PERL 'check timestamps with author-specific timezones' ' Rev 2 2005-01-31 18:00:00 -0600 User Two Rev 1 2005-01-01 00:00:00 +0000 User One EOF - test_cmp actual-2 expect-2 + test_cmp expect-2 actual-2 ' test_done diff --git a/t/t9832-unshelve.sh b/t/t9832-unshelve.sh index 48ec7679b8..41c09f11f4 100755 --- a/t/t9832-unshelve.sh +++ b/t/t9832-unshelve.sh @@ -19,8 +19,10 @@ test_expect_success 'init depot' ' p4 add file1 && p4 submit -d "change 1" && : >file_to_delete && + : >file_to_move && p4 add file_to_delete && - p4 submit -d "file to delete" + p4 add file_to_move && + p4 submit -d "add files to delete" ) ' @@ -36,6 +38,8 @@ test_expect_success 'create shelved changelist' ' echo "new file" >file2 && p4 add file2 && p4 delete file_to_delete && + p4 edit file_to_move && + p4 move file_to_move moved_file && p4 opened && p4 shelve -i <<EOF Change: new @@ -47,6 +51,8 @@ Files: //depot/file1 //depot/file2 //depot/file_to_delete + //depot/file_to_move + //depot/moved_file EOF ) && @@ -54,12 +60,14 @@ EOF cd "$git" && change=$(last_shelved_change) && git p4 unshelve $change && - git show refs/remotes/p4/unshelved/$change | grep -q "Further description" && - git cherry-pick refs/remotes/p4/unshelved/$change && + git show refs/remotes/p4-unshelved/$change | grep -q "Further description" && + git cherry-pick refs/remotes/p4-unshelved/$change && test_path_is_file file2 && test_cmp file1 "$cli"/file1 && test_cmp file2 "$cli"/file2 && - test_path_is_missing file_to_delete + test_path_is_missing file_to_delete && + test_path_is_missing file_to_move && + test_path_is_file moved_file ) ' @@ -88,10 +96,22 @@ EOF cd "$git" && change=$(last_shelved_change) && git p4 unshelve $change && - git diff refs/remotes/p4/unshelved/$change.0 refs/remotes/p4/unshelved/$change | grep -q file3 + git diff refs/remotes/p4-unshelved/$change.0 refs/remotes/p4-unshelved/$change | grep -q file3 ) ' +shelve_one_file () { + description="Change to be unshelved" && + file="$1" && + p4 shelve -i <<EOF +Change: new +Description: + $description +Files: + $file +EOF +} + # This is the tricky case where the shelved changelist base revision doesn't # match git-p4's idea of the base revision # @@ -108,29 +128,52 @@ test_expect_success 'create shelved changelist based on p4 change ahead of p4/ma p4 submit -d "change:foo" && p4 edit file1 && echo "bar" >>file1 && - p4 shelve -i <<EOF && -Change: new -Description: - Change to be unshelved -Files: - //depot/file1 -EOF + shelve_one_file //depot/file1 && change=$(last_shelved_change) && - p4 describe -S $change | grep -q "Change to be unshelved" + p4 describe -S $change >out.txt && + grep -q "Change to be unshelved" out.txt ) ' -# Now try to unshelve it. git-p4 should refuse to do so. +# Now try to unshelve it. test_expect_success 'try to unshelve the change' ' test_when_finished cleanup_git && ( change=$(last_shelved_change) && cd "$git" && - test_must_fail git p4 unshelve $change 2>out.txt && - grep -q "cannot unshelve" out.txt + git p4 unshelve $change >out.txt && + grep -q "unshelved changelist $change" out.txt ) ' +# Specify the origin. Create 2 unrelated files, and check that +# we only get the one in HEAD~, not the one in HEAD. + +test_expect_success 'unshelve specifying the origin' ' + ( + cd "$cli" && + : >unrelated_file0 && + p4 add unrelated_file0 && + p4 submit -d "unrelated" && + : >unrelated_file1 && + p4 add unrelated_file1 && + p4 submit -d "unrelated" && + : >file_to_shelve && + p4 add file_to_shelve && + shelve_one_file //depot/file_to_shelve + ) && + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot/@all && + ( + cd "$git" && + change=$(last_shelved_change) && + git p4 unshelve --origin HEAD~ $change && + git checkout refs/remotes/p4-unshelved/$change && + test_path_is_file unrelated_file0 && + test_path_is_missing unrelated_file1 && + test_path_is_file file_to_shelve + ) +' test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 175f83d704..3c6b185b60 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -1697,7 +1697,8 @@ test_expect_success 'sourcing the completion script clears cached commands' ' verbose test -z "$__git_all_commands" ' -test_expect_success !GETTEXT_POISON 'sourcing the completion script clears cached merge strategies' ' +test_expect_success 'sourcing the completion script clears cached merge strategies' ' + GIT_TEST_GETTEXT_POISON= && __git_compute_merge_strategies && verbose test -n "$__git_merge_strategies" && . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index d82fac9d79..b4e391526a 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -747,6 +747,29 @@ test_cmp() { $GIT_TEST_CMP "$@" } +# Check that the given config key has the expected value. +# +# test_cmp_config [-C <dir>] <expected-value> +# [<git-config-options>...] <config-key> +# +# for example to check that the value of core.bar is foo +# +# test_cmp_config foo core.bar +# +test_cmp_config() { + local GD && + if test "$1" = "-C" + then + shift && + GD="-C $1" && + shift + fi && + printf "%s\n" "$1" >expect.config && + shift && + git $GD config "$@" >actual.config && + test_cmp expect.config actual.config +} + # test_cmp_bin - helper to compare binary files test_cmp_bin() { @@ -755,16 +778,16 @@ test_cmp_bin() { # Use this instead of test_cmp to compare files that contain expected and # actual output from git commands that can be translated. When running -# under GETTEXT_POISON this pretends that the command produced expected +# under GIT_TEST_GETTEXT_POISON this pretends that the command produced expected # results. test_i18ncmp () { - test -n "$GETTEXT_POISON" || test_cmp "$@" + ! test_have_prereq C_LOCALE_OUTPUT || test_cmp "$@" } # Use this instead of "grep expected-string actual" to see if the # output from a git command that can be translated either contains an # expected string, or does not contain an unwanted one. When running -# under GETTEXT_POISON this pretends that the command produced expected +# under GIT_TEST_GETTEXT_POISON this pretends that the command produced expected # results. test_i18ngrep () { eval "last_arg=\${$#}" @@ -779,7 +802,7 @@ test_i18ngrep () { error "bug in the test script: too few parameters to test_i18ngrep" fi - if test -n "$GETTEXT_POISON" + if test_have_prereq !C_LOCALE_OUTPUT then # pretend success return 0 @@ -900,7 +923,8 @@ test_create_repo () { mkdir -p "$repo" ( cd "$repo" || error "Cannot setup test environment" - "$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 || + "${GIT_TEST_INSTALLED:-$GIT_EXEC_PATH}/git$X" init \ + "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 || error "cannot run git init -- have you built things yet?" mv .git/hooks .git/hooks-disabled ) || exit @@ -1157,3 +1181,72 @@ depacketize () { } ' } + +# Set the hash algorithm in use to $1. Only useful when testing the testsuite. +test_set_hash () { + test_hash_algo="$1" +} + +# Detect the hash algorithm in use. +test_detect_hash () { + # Currently we only support SHA-1, but in the future this function will + # actually detect the algorithm in use. + test_hash_algo='sha1' +} + +# Load common hash metadata and common placeholder object IDs for use with +# test_oid. +test_oid_init () { + test -n "$test_hash_algo" || test_detect_hash && + test_oid_cache <"$TEST_DIRECTORY/oid-info/hash-info" && + test_oid_cache <"$TEST_DIRECTORY/oid-info/oid" +} + +# Load key-value pairs from stdin suitable for use with test_oid. Blank lines +# and lines starting with "#" are ignored. Keys must be shell identifier +# characters. +# +# Examples: +# rawsz sha1:20 +# rawsz sha256:32 +test_oid_cache () { + local tag rest k v && + + { test -n "$test_hash_algo" || test_detect_hash; } && + while read tag rest + do + case $tag in + \#*) + continue;; + ?*) + # non-empty + ;; + *) + # blank line + continue;; + esac && + + k="${rest%:*}" && + v="${rest#*:}" && + + if ! expr "$k" : '[a-z0-9][a-z0-9]*$' >/dev/null + then + error 'bug in the test script: bad hash algorithm' + fi && + eval "test_oid_${k}_$tag=\"\$v\"" + done +} + +# Look up a per-hash value based on a key ($1). The value must have been loaded +# by test_oid_init or test_oid_cache. +test_oid () { + local var="test_oid_${test_hash_algo}_$1" && + + # If the variable is unset, we must be missing an entry for this + # key-hash pair, so exit with an error. + if eval "test -z \"\${$var+set}\"" + then + error "bug in the test script: undefined key '$1'" >&2 + fi && + eval "printf '%s' \"\${$var}\"" +} diff --git a/t/test-lib.sh b/t/test-lib.sh index 3f95bfda60..6c6c0af7a1 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -49,25 +49,35 @@ export ASAN_OPTIONS : ${LSAN_OPTIONS=abort_on_error=1} export LSAN_OPTIONS +if test ! -f "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS +then + echo >&2 'error: GIT-BUILD-OPTIONS missing (has Git been built?).' + exit 1 +fi +. "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS +export PERL_PATH SHELL_PATH + ################################################################ # It appears that people try to run tests without building... -"$GIT_BUILD_DIR/git" >/dev/null +"${GIT_TEST_INSTALLED:-$GIT_BUILD_DIR}/git$X" >/dev/null if test $? != 1 then - echo >&2 'error: you do not seem to have built git yet.' + if test -n "$GIT_TEST_INSTALLED" + then + echo >&2 "error: there is no working Git at '$GIT_TEST_INSTALLED'" + else + echo >&2 'error: you do not seem to have built git yet.' + fi exit 1 fi -. "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS -export PERL_PATH SHELL_PATH - # if --tee was passed, write the output not only to the terminal, but # additionally to the file test-results/$BASENAME.out, too. case "$GIT_TEST_TEE_STARTED, $* " in done,*) # do not redirect again ;; -*' --tee '*|*' --va'*|*' --verbose-log '*) +*' --tee '*|*' --va'*|*' -V '*|*' --verbose-log '*) mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results" BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)" @@ -95,6 +105,16 @@ PAGER=cat TZ=UTC export LANG LC_ALL PAGER TZ EDITOR=: + +# GIT_TEST_GETTEXT_POISON should not influence git commands executed +# during initialization of test-lib and the test repo. Back it up, +# unset and then restore after initialization is finished. +if test -n "$GIT_TEST_GETTEXT_POISON" +then + GIT_TEST_GETTEXT_POISON_ORIG=$GIT_TEST_GETTEXT_POISON + unset GIT_TEST_GETTEXT_POISON +fi + # A call to "unset" with no arguments causes at least Solaris 10 # /usr/xpg4/bin/sh and /bin/ksh to bail out. So keep the unsets # deriving from the command substitution clustered with the other @@ -134,9 +154,40 @@ export EDITOR GIT_TRACE_BARE=1 export GIT_TRACE_BARE -if test -n "${TEST_GIT_INDEX_VERSION:+isset}" +check_var_migration () { + # the warnings and hints given from this helper depends + # on end-user settings, which will disrupt the self-test + # done on the test framework itself. + case "$GIT_TEST_FRAMEWORK_SELFTEST" in + t) return ;; + esac + + old_name=$1 new_name=$2 + eval "old_isset=\${${old_name}:+isset}" + eval "new_isset=\${${new_name}:+isset}" + + case "$old_isset,$new_isset" in + isset,) + echo >&2 "warning: $old_name is now $new_name" + echo >&2 "hint: set $new_name too during the transition period" + eval "$new_name=\$$old_name" + ;; + isset,isset) + # do this later + # echo >&2 "warning: $old_name is now $new_name" + # echo >&2 "hint: remove $old_name" + ;; + esac +} + +check_var_migration GIT_FSMONITOR_TEST GIT_TEST_FSMONITOR +check_var_migration TEST_GIT_INDEX_VERSION GIT_TEST_INDEX_VERSION +check_var_migration GIT_FORCE_PRELOAD_TEST GIT_TEST_PRELOAD_INDEX + +# Use specific version of the index file format +if test -n "${GIT_TEST_INDEX_VERSION:+isset}" then - GIT_INDEX_VERSION="$TEST_GIT_INDEX_VERSION" + GIT_INDEX_VERSION="$GIT_TEST_INDEX_VERSION" export GIT_INDEX_VERSION fi @@ -285,7 +336,7 @@ do echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" fi shift ;; - --verbose-log) + -V|--verbose-log) verbose_log=t shift ;; *) @@ -926,7 +977,7 @@ elif test -n "$GIT_TEST_INSTALLED" then GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path) || error "Cannot run git from $GIT_TEST_INSTALLED." - PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR:$PATH + PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR/t/helper:$PATH GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH} else # normal case, use ../bin-wrappers only unless $with_dashes: git_bin_dir="$GIT_BUILD_DIR/bin-wrappers" @@ -1073,13 +1124,15 @@ test -n "$USE_LIBPCRE1" && test_set_prereq LIBPCRE1 test -n "$USE_LIBPCRE2" && test_set_prereq LIBPCRE2 test -z "$NO_GETTEXT" && test_set_prereq GETTEXT +if test -n "$GIT_TEST_GETTEXT_POISON_ORIG" +then + GIT_TEST_GETTEXT_POISON=$GIT_TEST_GETTEXT_POISON_ORIG + unset GIT_TEST_GETTEXT_POISON_ORIG +fi + # Can we rely on git's output in the C locale? -if test -n "$GETTEXT_POISON" +if test -z "$GIT_TEST_GETTEXT_POISON" then - GIT_GETTEXT_POISON=YesPlease - export GIT_GETTEXT_POISON - test_set_prereq GETTEXT_POISON -else test_set_prereq C_LOCALE_OUTPUT fi @@ -1237,3 +1290,7 @@ test_lazy_prereq CURL ' test_lazy_prereq SHA1 ' test $(git hash-object /dev/null) = e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 ' + +test_lazy_prereq REBASE_P ' + test -z "$GIT_TEST_SKIP_REBASE_P" +' |