diff options
Diffstat (limited to 't')
| -rw-r--r-- | t/lib-read-tree.sh | 52 | ||||
| -rwxr-xr-x | t/t1005-read-tree-reset.sh | 141 | ||||
| -rwxr-xr-x | t/t1006-cat-file.sh | 28 | ||||
| -rwxr-xr-x | t/t1506-rev-parse-diagnosis.sh | 24 | ||||
| -rwxr-xr-x | t/t5500-fetch-pack.sh | 87 | ||||
| -rwxr-xr-x | t/t5601-clone.sh | 132 | ||||
| -rwxr-xr-x | t/t6131-pathspec-icase.sh | 6 | ||||
| -rwxr-xr-x | t/t7001-mv.sh | 29 | ||||
| -rwxr-xr-x | t/t7406-submodule-update.sh | 15 |
9 files changed, 404 insertions, 110 deletions
diff --git a/t/lib-read-tree.sh b/t/lib-read-tree.sh index abc2c6f57f..ef079afc46 100644 --- a/t/lib-read-tree.sh +++ b/t/lib-read-tree.sh @@ -5,39 +5,39 @@ # write the index and that together with -u it doesn't touch the work tree. # read_tree_must_succeed () { - git ls-files -s >pre-dry-run && - git read-tree -n "$@" && - git ls-files -s >post-dry-run && - test_cmp pre-dry-run post-dry-run && - git read-tree "$@" + git ls-files -s >pre-dry-run && + git read-tree -n "$@" && + git ls-files -s >post-dry-run && + test_cmp pre-dry-run post-dry-run && + git read-tree "$@" } read_tree_must_fail () { - git ls-files -s >pre-dry-run && - test_must_fail git read-tree -n "$@" && - git ls-files -s >post-dry-run && - test_cmp pre-dry-run post-dry-run && - test_must_fail git read-tree "$@" + git ls-files -s >pre-dry-run && + test_must_fail git read-tree -n "$@" && + git ls-files -s >post-dry-run && + test_cmp pre-dry-run post-dry-run && + test_must_fail git read-tree "$@" } read_tree_u_must_succeed () { - git ls-files -s >pre-dry-run && - git diff-files -p >pre-dry-run-wt && - git read-tree -n "$@" && - git ls-files -s >post-dry-run && - git diff-files -p >post-dry-run-wt && - test_cmp pre-dry-run post-dry-run && - test_cmp pre-dry-run-wt post-dry-run-wt && - git read-tree "$@" + git ls-files -s >pre-dry-run && + git diff-files -p >pre-dry-run-wt && + git read-tree -n "$@" && + git ls-files -s >post-dry-run && + git diff-files -p >post-dry-run-wt && + test_cmp pre-dry-run post-dry-run && + test_cmp pre-dry-run-wt post-dry-run-wt && + git read-tree "$@" } read_tree_u_must_fail () { - git ls-files -s >pre-dry-run && - git diff-files -p >pre-dry-run-wt && - test_must_fail git read-tree -n "$@" && - git ls-files -s >post-dry-run && - git diff-files -p >post-dry-run-wt && - test_cmp pre-dry-run post-dry-run && - test_cmp pre-dry-run-wt post-dry-run-wt && - test_must_fail git read-tree "$@" + git ls-files -s >pre-dry-run && + git diff-files -p >pre-dry-run-wt && + test_must_fail git read-tree -n "$@" && + git ls-files -s >post-dry-run && + git diff-files -p >post-dry-run-wt && + test_cmp pre-dry-run post-dry-run && + test_cmp pre-dry-run-wt post-dry-run-wt && + test_must_fail git read-tree "$@" } diff --git a/t/t1005-read-tree-reset.sh b/t/t1005-read-tree-reset.sh index f53de79e56..074568500a 100755 --- a/t/t1005-read-tree-reset.sh +++ b/t/t1005-read-tree-reset.sh @@ -8,84 +8,99 @@ test_description='read-tree -u --reset' # two-tree test test_expect_success 'setup' ' - git init && - mkdir df && - echo content >df/file && - git add df/file && - git commit -m one && - git ls-files >expect && - rm -rf df && - echo content >df && - git add df && - echo content >new && - git add new && - git commit -m two + git init && + mkdir df && + echo content >df/file && + git add df/file && + git commit -m one && + git ls-files >expect && + rm -rf df && + echo content >df && + git add df && + echo content >new && + git add new && + git commit -m two ' test_expect_success 'reset should work' ' - read_tree_u_must_succeed -u --reset HEAD^ && - git ls-files >actual && - test_cmp expect actual + read_tree_u_must_succeed -u --reset HEAD^ && + git ls-files >actual && + test_cmp expect actual ' test_expect_success 'reset should remove remnants from a failed merge' ' - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >expect && - sha1=$(git rev-parse :new) && - ( - echo "100644 $sha1 1 old" - echo "100644 $sha1 3 old" - ) | git update-index --index-info && - >old && - git ls-files -s && - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >actual && - ! test -f old + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >actual && + ! test -f old +' + +test_expect_success 'two-way reset should remove remnants too' ' + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + read_tree_u_must_succeed --reset -u HEAD HEAD && + git ls-files -s >actual && + ! test -f old ' test_expect_success 'Porcelain reset should remove remnants too' ' - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >expect && - sha1=$(git rev-parse :new) && - ( - echo "100644 $sha1 1 old" - echo "100644 $sha1 3 old" - ) | git update-index --index-info && - >old && - git ls-files -s && - git reset --hard && - git ls-files -s >actual && - ! test -f old + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + git reset --hard && + git ls-files -s >actual && + ! test -f old ' test_expect_success 'Porcelain checkout -f should remove remnants too' ' - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >expect && - sha1=$(git rev-parse :new) && - ( - echo "100644 $sha1 1 old" - echo "100644 $sha1 3 old" - ) | git update-index --index-info && - >old && - git ls-files -s && - git checkout -f && - git ls-files -s >actual && - ! test -f old + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + git checkout -f && + git ls-files -s >actual && + ! test -f old ' test_expect_success 'Porcelain checkout -f HEAD should remove remnants too' ' - read_tree_u_must_succeed --reset -u HEAD && - git ls-files -s >expect && - sha1=$(git rev-parse :new) && - ( - echo "100644 $sha1 1 old" - echo "100644 $sha1 3 old" - ) | git update-index --index-info && - >old && - git ls-files -s && - git checkout -f HEAD && - git ls-files -s >actual && - ! test -f old + read_tree_u_must_succeed --reset -u HEAD && + git ls-files -s >expect && + sha1=$(git rev-parse :new) && + ( + echo "100644 $sha1 1 old" + echo "100644 $sha1 3 old" + ) | git update-index --index-info && + >old && + git ls-files -s && + git checkout -f HEAD && + git ls-files -s >actual && + ! test -f old ' test_done diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index a420742494..1687098355 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -85,6 +85,28 @@ $content" git cat-file --batch-check="%(objecttype) %(rest)" >actual && test_cmp expect actual ' + + test -z "$content" || + test_expect_success "--batch without type ($type)" ' + { + echo "$size" && + maybe_remove_timestamp "$content" $no_ts + } >expect && + echo $sha1 | git cat-file --batch="%(objectsize)" >actual.full && + maybe_remove_timestamp "$(cat actual.full)" $no_ts >actual && + test_cmp expect actual + ' + + test -z "$content" || + test_expect_success "--batch without size ($type)" ' + { + echo "$type" && + maybe_remove_timestamp "$content" $no_ts + } >expect && + echo $sha1 | git cat-file --batch="%(objecttype)" >actual.full && + maybe_remove_timestamp "$(cat actual.full)" $no_ts >actual && + test_cmp expect actual + ' } hello_content="Hello World" @@ -194,6 +216,12 @@ test_expect_success "--batch-check for an emtpy line" ' test " missing" = "$(echo | git cat-file --batch-check)" ' +test_expect_success 'empty --batch-check notices missing object' ' + echo "$_z40 missing" >expect && + echo "$_z40" | git cat-file --batch-check="" >actual && + test_cmp expect actual +' + batch_input="$hello_sha1 $commit_sha1 $tag_sha1 diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index f950c10128..613d9bfe1b 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -196,4 +196,28 @@ test_expect_success 'dotdot is not an empty set' ' test_cmp expect actual ' +test_expect_success 'arg before dashdash must be a revision (missing)' ' + test_must_fail git rev-parse foobar -- 2>stderr && + test_i18ngrep "bad revision" stderr +' + +test_expect_success 'arg before dashdash must be a revision (file)' ' + >foobar && + test_must_fail git rev-parse foobar -- 2>stderr && + test_i18ngrep "bad revision" stderr +' + +test_expect_success 'arg before dashdash must be a revision (ambiguous)' ' + >foobar && + git update-ref refs/heads/foobar HEAD && + { + # we do not want to use rev-parse here, because + # we are testing it + cat .git/refs/heads/foobar && + printf "%s\n" -- + } >expect && + git rev-parse foobar -- >actual && + test_cmp expect actual +' + test_done diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index d87ddf73b7..5b2b1c2c13 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -531,5 +531,92 @@ test_expect_success 'shallow fetch with tags does not break the repository' ' git fsck ) ' +check_prot_path () { + cat >expected <<-EOF && + Diag: url=$1 + Diag: protocol=$2 + Diag: path=$3 + EOF + git fetch-pack --diag-url "$1" | grep -v hostandport= >actual && + test_cmp expected actual +} + +check_prot_host_path () { + cat >expected <<-EOF && + Diag: url=$1 + Diag: protocol=$2 + Diag: hostandport=$3 + Diag: path=$4 + EOF + git fetch-pack --diag-url "$1" >actual && + test_cmp expected actual +} + +for r in repo re:po re/po +do + # git or ssh with scheme + for p in "ssh+git" "git+ssh" git ssh + do + for h in host host:12 [::1] [::1]:23 + do + case "$p" in + *ssh*) + pp=ssh + ;; + *) + pp=$p + ;; + esac + test_expect_success "fetch-pack --diag-url $p://$h/$r" ' + check_prot_host_path $p://$h/$r $pp "$h" "/$r" + ' + # "/~" -> "~" conversion + test_expect_success "fetch-pack --diag-url $p://$h/~$r" ' + check_prot_host_path $p://$h/~$r $pp "$h" "~$r" + ' + done + done + # file with scheme + for p in file + do + test_expect_success "fetch-pack --diag-url $p://$h/$r" ' + check_prot_path $p://$h/$r $p "/$r" + ' + # No "/~" -> "~" conversion for file + test_expect_success "fetch-pack --diag-url $p://$h/~$r" ' + check_prot_path $p://$h/~$r $p "/~$r" + ' + done + # file without scheme + for h in nohost nohost:12 [::1] [::1]:23 [ [:aa + do + test_expect_success "fetch-pack --diag-url ./$h:$r" ' + check_prot_path ./$h:$r $p "./$h:$r" + ' + # No "/~" -> "~" conversion for file + test_expect_success "fetch-pack --diag-url ./$p:$h/~$r" ' + check_prot_path ./$p:$h/~$r $p "./$p:$h/~$r" + ' + done + #ssh without scheme + p=ssh + for h in host [::1] + do + test_expect_success "fetch-pack --diag-url $h:$r" ' + check_prot_path $h:$r $p "$r" + ' + # Do "/~" -> "~" conversion + test_expect_success "fetch-pack --diag-url $h:/~$r" ' + check_prot_host_path $h:/~$r $p "$h" "~$r" + ' + done +done + +test_expect_success MINGW 'fetch-pack --diag-url file://c:/repo' ' + check_prot_path file://c:/repo file c:/repo +' +test_expect_success MINGW 'fetch-pack --diag-url c:repo' ' + check_prot_path c:repo file c:repo +' test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 1d1c8755ea..62fbd7e664 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -280,25 +280,26 @@ test_expect_success 'clone checking out a tag' ' test_cmp fetch.expected fetch.actual ' -test_expect_success 'setup ssh wrapper' ' - write_script "$TRASH_DIRECTORY/ssh-wrapper" <<-\EOF && - echo >>"$TRASH_DIRECTORY/ssh-output" "ssh: $*" && - # throw away all but the last argument, which should be the - # command - while test $# -gt 1; do shift; done - eval "$1" - EOF - - GIT_SSH="$TRASH_DIRECTORY/ssh-wrapper" && - export GIT_SSH && - export TRASH_DIRECTORY -' - -clear_ssh () { - >"$TRASH_DIRECTORY/ssh-output" +setup_ssh_wrapper () { + test_expect_success 'setup ssh wrapper' ' + write_script "$TRASH_DIRECTORY/ssh-wrapper" <<-\EOF && + echo >>"$TRASH_DIRECTORY/ssh-output" "ssh: $*" && + # throw away all but the last argument, which should be the + # command + while test $# -gt 1; do shift; done + eval "$1" + EOF + GIT_SSH="$TRASH_DIRECTORY/ssh-wrapper" && + export GIT_SSH && + export TRASH_DIRECTORY && + >"$TRASH_DIRECTORY"/ssh-output + ' } expect_ssh () { + test_when_finished ' + (cd "$TRASH_DIRECTORY" && rm -f ssh-expect && >ssh-output) + ' && { case "$1" in none) @@ -310,25 +311,114 @@ expect_ssh () { (cd "$TRASH_DIRECTORY" && test_cmp ssh-expect ssh-output) } -test_expect_success 'cloning myhost:src uses ssh' ' - clear_ssh && +setup_ssh_wrapper + +test_expect_success 'clone myhost:src uses ssh' ' git clone myhost:src ssh-clone && expect_ssh myhost src ' test_expect_success NOT_MINGW,NOT_CYGWIN 'clone local path foo:bar' ' - clear_ssh && cp -R src "foo:bar" && - git clone "./foo:bar" foobar && + git clone "foo:bar" foobar && expect_ssh none ' test_expect_success 'bracketed hostnames are still ssh' ' - clear_ssh && git clone "[myhost:123]:src" ssh-bracket-clone && expect_ssh myhost:123 src ' +counter=0 +# $1 url +# $2 none|host +# $3 path +test_clone_url () { + counter=$(($counter + 1)) + test_might_fail git clone "$1" tmp$counter && + expect_ssh "$2" "$3" +} + +test_expect_success NOT_MINGW 'clone c:temp is ssl' ' + test_clone_url c:temp c temp +' + +test_expect_success MINGW 'clone c:temp is dos drive' ' + test_clone_url c:temp none +' + +#ip v4 +for repo in rep rep/home/project 123 +do + test_expect_success "clone host:$repo" ' + test_clone_url host:$repo host $repo + ' +done + +#ipv6 +for repo in rep rep/home/project 123 +do + test_expect_success "clone [::1]:$repo" ' + test_clone_url [::1]:$repo ::1 $repo + ' +done +#home directory +test_expect_success "clone host:/~repo" ' + test_clone_url host:/~repo host "~repo" +' + +test_expect_success "clone [::1]:/~repo" ' + test_clone_url [::1]:/~repo ::1 "~repo" +' + +# Corner cases +for url in foo/bar:baz [foo]bar/baz:qux [foo/bar]:baz +do + test_expect_success "clone $url is not ssh" ' + test_clone_url $url none + ' +done + +#with ssh:// scheme +test_expect_success 'clone ssh://host.xz/home/user/repo' ' + test_clone_url "ssh://host.xz/home/user/repo" host.xz "/home/user/repo" +' + +# from home directory +test_expect_success 'clone ssh://host.xz/~repo' ' + test_clone_url "ssh://host.xz/~repo" host.xz "~repo" +' + +# with port number +test_expect_success 'clone ssh://host.xz:22/home/user/repo' ' + test_clone_url "ssh://host.xz:22/home/user/repo" "-p 22 host.xz" "/home/user/repo" +' + +# from home directory with port number +test_expect_success 'clone ssh://host.xz:22/~repo' ' + test_clone_url "ssh://host.xz:22/~repo" "-p 22 host.xz" "~repo" +' + +#IPv6 +test_expect_success 'clone ssh://[::1]/home/user/repo' ' + test_clone_url "ssh://[::1]/home/user/repo" "::1" "/home/user/repo" +' + +#IPv6 from home directory +test_expect_success 'clone ssh://[::1]/~repo' ' + test_clone_url "ssh://[::1]/~repo" "::1" "~repo" +' + +#IPv6 with port number +test_expect_success 'clone ssh://[::1]:22/home/user/repo' ' + test_clone_url "ssh://[::1]:22/home/user/repo" "-p 22 ::1" "/home/user/repo" +' + +#IPv6 from home directory with port number +test_expect_success 'clone ssh://[::1]:22/~repo' ' + test_clone_url "ssh://[::1]:22/~repo" "-p 22 ::1" "~repo" +' + test_expect_success 'clone from a repository with two identical branches' ' ( diff --git a/t/t6131-pathspec-icase.sh b/t/t6131-pathspec-icase.sh index 8d4a7fcb91..a7c7ff5f49 100755 --- a/t/t6131-pathspec-icase.sh +++ b/t/t6131-pathspec-icase.sh @@ -100,4 +100,10 @@ test_expect_success 'match_pathspec_depth matches :(icase)bar with empty prefix' test_cmp expect actual ' +test_expect_success '"git diff" can take magic :(icase) pathspec' ' + echo FOO/BAR >expect && + git diff --name-only HEAD^ HEAD -- ":(icase)foo/bar" >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index b90e985a48..3bfdfed1f7 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -70,6 +70,35 @@ test_expect_success \ rm -f idontexist untracked1 untracked2 \ path0/idontexist path0/untracked1 path0/untracked2 \ .git/index.lock +rmdir path1 + +test_expect_success \ + 'moving to absent target with trailing slash' \ + 'test_must_fail git mv path0/COPYING no-such-dir/ && + test_must_fail git mv path0/COPYING no-such-dir// && + git mv path0/ no-such-dir/ && + test_path_is_dir no-such-dir' + +test_expect_success \ + 'clean up' \ + 'git reset --hard' + +test_expect_success \ + 'moving to existing untracked target with trailing slash' \ + 'mkdir path1 && + git mv path0/ path1/ && + test_path_is_dir path1/path0/' + +test_expect_success \ + 'moving to existing tracked target with trailing slash' \ + 'mkdir path2 && + >path2/file && git add path2/file && + git mv path1/path0/ path2/ && + test_path_is_dir path2/path0/' + +test_expect_success \ + 'clean up' \ + 'git reset --hard' test_expect_success \ 'adding another file' \ diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index f0b33053ab..0825a928df 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -323,6 +323,21 @@ test_expect_success 'submodule update - command in .git/config catches failure' ) ' +test_expect_success 'submodule init does not copy command into .git/config' ' + (cd super && + H=$(git ls-files -s submodule | cut -d" " -f2) && + mkdir submodule1 && + git update-index --add --cacheinfo 160000 $H submodule1 && + git config -f .gitmodules submodule.submodule1.path submodule1 && + git config -f .gitmodules submodule.submodule1.url ../submodule && + git config -f .gitmodules submodule.submodule1.update !false && + git submodule init submodule1 && + echo "none" >expect && + git config submodule.submodule1.update >actual && + test_cmp expect actual + ) +' + test_expect_success 'submodule init picks up rebase' ' (cd super && git config -f .gitmodules submodule.rebasing.update rebase && |