diff options
Diffstat (limited to 't')
| -rwxr-xr-x | t/t9163-git-svn-reset-clears-caches.sh | 78 | ||||
| -rwxr-xr-x | t/t9164-git-svn-dcommit-concrrent.sh | 216 |
2 files changed, 294 insertions, 0 deletions
diff --git a/t/t9163-git-svn-reset-clears-caches.sh b/t/t9163-git-svn-reset-clears-caches.sh new file mode 100755 index 0000000000..cd4c662ba2 --- /dev/null +++ b/t/t9163-git-svn-reset-clears-caches.sh @@ -0,0 +1,78 @@ +#!/bin/sh +# +# Copyright (c) 2012 Peter Baumann +# + +test_description='git svn reset clears memoized caches' +. ./lib-git-svn.sh + +svn_ver="$(svn --version --quiet)" +case $svn_ver in +0.* | 1.[0-4].*) + skip_all="skipping git-svn test - SVN too old ($svn_ver)" + test_done + ;; +esac + +# ... a - b - m <- trunk +# \ / +# ... c <- branch1 +# +# SVN Commits not interesting for this test are abbreviated with "..." +# +test_expect_success 'initialize source svn repo' ' + svn_cmd mkdir -m "create trunk" "$svnrepo"/trunk && + svn_cmd mkdir -m "create branches" "$svnrepo/branches" && + svn_cmd co "$svnrepo"/trunk "$SVN_TREE" && + ( + cd "$SVN_TREE" && + touch foo && + svn_cmd add foo && + svn_cmd commit -m "a" && + svn_cmd cp -m branch "$svnrepo"/trunk "$svnrepo"/branches/branch1 && + svn_cmd switch "$svnrepo"/branches/branch1 && + touch bar && + svn_cmd add bar && + svn_cmd commit -m b && + svn_cmd switch "$svnrepo"/trunk && + touch baz && + svn_cmd add baz && + svn_cmd commit -m c && + svn_cmd up && + svn_cmd merge "$svnrepo"/branches/branch1 && + svn_cmd commit -m "m" + ) && + rm -rf "$SVN_TREE" +' + +test_expect_success 'fetch to merge-base (a)' ' + git svn init -s "$svnrepo" && + git svn fetch --revision BASE:3 +' + +# git svn rebase looses the merge commit +# +# ... a - b - m <- trunk +# \ +# ... c +# +test_expect_success 'rebase looses SVN merge (m)' ' + git svn rebase && + git svn fetch && + test 1 = $(git cat-file -p master|grep parent|wc -l) +' + +# git svn fetch creates correct history with merge commit +# +# ... a - b - m <- trunk +# \ / +# ... c <- branch1 +# +test_expect_success 'reset and fetch gets the SVN merge (m) correctly' ' + git svn reset -r 3 && + git reset --hard trunk && + git svn fetch && + test 2 = $(git cat-file -p trunk|grep parent|wc -l) +' + +test_done diff --git a/t/t9164-git-svn-dcommit-concrrent.sh b/t/t9164-git-svn-dcommit-concrrent.sh new file mode 100755 index 0000000000..aac2ddadf2 --- /dev/null +++ b/t/t9164-git-svn-dcommit-concrrent.sh @@ -0,0 +1,216 @@ +#!/bin/sh +# +# Copyright (c) 2012 Robert Luberda +# + +test_description='concurrent git svn dcommit' +. ./lib-git-svn.sh + + + +test_expect_success 'setup svn repository' ' + svn_cmd checkout "$svnrepo" work.svn && + ( + cd work.svn && + echo >file && echo > auto_updated_file + svn_cmd add file auto_updated_file && + svn_cmd commit -m "initial commit" + ) && + svn_cmd checkout "$svnrepo" work-auto-commits.svn +' +N=0 +next_N() +{ + N=$(( $N + 1 )) +} + +# Setup SVN repository hooks to emulate SVN failures or concurrent commits +# The function adds +# either pre-commit hook, which causes SVN commit given in second argument +# to fail +# or post-commit hook, which creates a new commit (a new line added to +# auto_updated_file) after given SVN commit +# The first argument contains a type of the hook +# The second argument contains a number (not SVN revision) of commit +# the hook should be applied for (each time the hook is run, the given +# number is decreased by one until it gets 0, in which case the hook +# will execute its real action) +setup_hook() +{ + hook_type="$1" # "pre-commit" or "post-commit" + skip_revs="$2" + [ "$hook_type" = "pre-commit" ] || + [ "$hook_type" = "post-commit" ] || + { echo "ERROR: invalid argument ($hook_type)" \ + "passed to setup_hook" >&2 ; return 1; } + echo "cnt=$skip_revs" > "$hook_type-counter" + rm -f "$rawsvnrepo/hooks/"*-commit # drop previous hooks + hook="$rawsvnrepo/hooks/$hook_type" + cat > "$hook" <<- 'EOF1' + #!/bin/sh + set -e + cd "$1/.." # "$1" is repository location + exec >> svn-hook.log 2>&1 + hook="$(basename "$0")" + echo "*** Executing $hook $@" + set -x + . ./$hook-counter + cnt="$(($cnt - 1))" + echo "cnt=$cnt" > ./$hook-counter + [ "$cnt" = "0" ] || exit 0 +EOF1 + if [ "$hook_type" = "pre-commit" ]; then + echo "echo 'commit disallowed' >&2; exit 1" >> "$hook" + else + echo "PATH=\"$PATH\"; export PATH" >> $hook + echo "svnconf=\"$svnconf\"" >> $hook + cat >> "$hook" <<- 'EOF2' + cd work-auto-commits.svn + svn up --config-dir "$svnconf" + echo "$$" >> auto_updated_file + svn commit --config-dir "$svnconf" \ + -m "auto-committing concurrent change" + exit 0 +EOF2 + fi + chmod 755 "$hook" +} + +check_contents() +{ + gitdir="$1" + (cd ../work.svn && svn_cmd up) && + test_cmp file ../work.svn/file && + test_cmp auto_updated_file ../work.svn/auto_updated_file +} + +test_expect_success 'check if post-commit hook creates a concurrent commit' ' + setup_hook post-commit 1 && + ( + cd work.svn && + cp auto_updated_file au_file_saved && + echo 1 >> file && + svn_cmd commit -m "changing file" && + svn_cmd up && + test_must_fail test_cmp auto_updated_file au_file_saved + ) +' + +test_expect_success 'check if pre-commit hook fails' ' + setup_hook pre-commit 2 && + ( + cd work.svn && + echo 2 >> file && + svn_cmd commit -m "changing file once again" && + echo 3 >> file && + test_must_fail svn_cmd commit -m "this commit should fail" && + svn_cmd revert file + ) +' + +test_expect_success 'dcommit error handling' ' + setup_hook pre-commit 2 && + next_N && git svn clone "$svnrepo" work$N.git && + ( + cd work$N.git && + echo 1 >> file && git commit -am "commit change $N.1" && + echo 2 >> file && git commit -am "commit change $N.2" && + echo 3 >> file && git commit -am "commit change $N.3" && + # should fail to dcommit 2nd and 3rd change + # but still should leave the repository in reasonable state + test_must_fail git svn dcommit && + git update-index --refresh && + git show HEAD~2 | grep -q git-svn-id && + ! git show HEAD~1 | grep -q git-svn-id && + ! git show HEAD | grep -q git-svn-id + ) +' + +test_expect_success 'dcommit concurrent change in non-changed file' ' + setup_hook post-commit 2 && + next_N && git svn clone "$svnrepo" work$N.git && + ( + cd work$N.git && + echo 1 >> file && git commit -am "commit change $N.1" && + echo 2 >> file && git commit -am "commit change $N.2" && + echo 3 >> file && git commit -am "commit change $N.3" && + # should rebase and leave the repository in reasonable state + git svn dcommit && + git update-index --refresh && + check_contents && + git show HEAD~3 | grep -q git-svn-id && + git show HEAD~2 | grep -q git-svn-id && + git show HEAD~1 | grep -q auto-committing && + git show HEAD | grep -q git-svn-id + ) +' + +# An utility function used in the following test +delete_first_line() +{ + file="$1" && + sed 1d < "$file" > "${file}.tmp" && + rm "$file" && + mv "${file}.tmp" "$file" +} + +test_expect_success 'dcommit concurrent non-conflicting change' ' + setup_hook post-commit 2 && + next_N && git svn clone "$svnrepo" work$N.git && + ( + cd work$N.git && + cat file >> auto_updated_file && + git commit -am "commit change $N.1" && + delete_first_line auto_updated_file && + git commit -am "commit change $N.2" && + delete_first_line auto_updated_file && + git commit -am "commit change $N.3" && + # should rebase and leave the repository in reasonable state + git svn dcommit && + git update-index --refresh && + check_contents && + git show HEAD~3 | grep -q git-svn-id && + git show HEAD~2 | grep -q git-svn-id && + git show HEAD~1 | grep -q auto-committing && + git show HEAD | grep -q git-svn-id + ) +' + +test_expect_success 'dcommit --no-rebase concurrent non-conflicting change' ' + setup_hook post-commit 2 && + next_N && git svn clone "$svnrepo" work$N.git && + ( + cd work$N.git && + cat file >> auto_updated_file && + git commit -am "commit change $N.1" && + delete_first_line auto_updated_file && + git commit -am "commit change $N.2" && + delete_first_line auto_updated_file && + git commit -am "commit change $N.3" && + # should fail as rebase is needed + test_must_fail git svn dcommit --no-rebase && + # but should leave HEAD unchanged + git update-index --refresh && + ! git show HEAD~2 | grep -q git-svn-id && + ! git show HEAD~1 | grep -q git-svn-id && + ! git show HEAD | grep -q git-svn-id + ) +' + +test_expect_success 'dcommit fails on concurrent conflicting change' ' + setup_hook post-commit 1 && + next_N && git svn clone "$svnrepo" work$N.git && + ( + cd work$N.git && + echo a >> file && + git commit -am "commit change $N.1" && + echo b >> auto_updated_file && + git commit -am "commit change $N.2" && + echo c >> auto_updated_file && + git commit -am "commit change $N.3" && + test_must_fail git svn dcommit && # rebase should fail + test_must_fail git update-index --refresh + ) +' + +test_done |