diff options
Diffstat (limited to 't')
88 files changed, 2194 insertions, 484 deletions
@@ -69,7 +69,8 @@ You can also run each test individually from command line, like this: You can pass --verbose (or -v), --debug (or -d), and --immediate (or -i) command line argument to the test, or by setting GIT_TEST_OPTS -appropriately before running "make". +appropriately before running "make". Short options can be bundled, i.e. +'-d -v' is the same as '-dv'. -v:: --verbose:: @@ -386,17 +387,13 @@ GIT_TEST_INDEX_VERSION=<n> exercises the index read/write code path for the index version specified. Can be set to any valid version (currently 2, 3, or 4). -GIT_TEST_PACK_SPARSE=<boolean> if enabled will default the pack-objects -builtin to use the sparse object walk. This can still be overridden by -the --no-sparse command-line argument. +GIT_TEST_PACK_SPARSE=<boolean> if disabled will default the pack-objects +builtin to use the non-sparse object walk. This can still be overridden by +the --sparse command-line argument. GIT_TEST_PRELOAD_INDEX=<boolean> exercises the preload-index code path by overriding the minimum number of cache entries required per thread. -GIT_TEST_STASH_USE_BUILTIN=<boolean>, when false, disables the -built-in version of git-stash. See 'stash.useBuiltin' in -git-config(1). - GIT_TEST_ADD_I_USE_BUILTIN=<boolean>, when true, enables the built-in version of git add -i. See 'add.interactive.useBuiltin' in git-config(1). @@ -550,6 +547,41 @@ Here are the "do's:" reports "ok" or "not ok" to the end user running the tests. Under --verbose, they are shown to help debug the tests. + - Be careful when you loop + + You may need to verify multiple things in a loop, but the + following does not work correctly: + + test_expect_success 'test three things' ' + for i in one two three + do + test_something "$i" + done && + test_something_else + ' + + Because the status of the loop itself is the exit status of the + test_something in the last round, the loop does not fail when + "test_something" for "one" or "two" fails. This is not what you + want. + + Instead, you can break out of the loop immediately when you see a + failure. Because all test_expect_* snippets are executed inside + a function, "return 1" can be used to fail the test immediately + upon a failure: + + test_expect_success 'test three things' ' + for i in one two three + do + test_something "$i" || return 1 + done && + test_something_else + ' + + Note that we still &&-chain the loop to propagate failures from + earlier commands. + + And here are the "don'ts:" - Don't exit() within a <script> part. diff --git a/t/helper/test-advise.c b/t/helper/test-advise.c new file mode 100644 index 0000000000..38cdc2884e --- /dev/null +++ b/t/helper/test-advise.c @@ -0,0 +1,22 @@ +#include "test-tool.h" +#include "cache.h" +#include "advice.h" +#include "config.h" + +int cmd__advise_if_enabled(int argc, const char **argv) +{ + if (!argv[1]) + die("usage: %s <advice>", argv[0]); + + setup_git_directory(); + git_config(git_default_config, NULL); + + /* + * Any advice type can be used for testing, but NESTED_TAG was + * selected here and in t0018 where this command is being + * executed. + */ + advise_if_enabled(ADVICE_NESTED_TAG, argv[1]); + + return 0; +} diff --git a/t/helper/test-dump-split-index.c b/t/helper/test-dump-split-index.c index 63c689d6ee..a209880eb3 100644 --- a/t/helper/test-dump-split-index.c +++ b/t/helper/test-dump-split-index.c @@ -13,6 +13,8 @@ int cmd__dump_split_index(int ac, const char **av) struct split_index *si; int i; + setup_git_directory(); + do_read_index(&the_index, av[1], 1); printf("own %s\n", oid_to_hex(&the_index.oid)); si = the_index.split_index; diff --git a/t/helper/test-sha1-array.c b/t/helper/test-oid-array.c index ad5e69f9d3..ce9fd5f091 100644 --- a/t/helper/test-sha1-array.c +++ b/t/helper/test-oid-array.c @@ -1,6 +1,6 @@ #include "test-tool.h" #include "cache.h" -#include "sha1-array.h" +#include "oid-array.h" static int print_oid(const struct object_id *oid, void *data) { @@ -8,7 +8,7 @@ static int print_oid(const struct object_id *oid, void *data) return 0; } -int cmd__sha1_array(int argc, const char **argv) +int cmd__oid_array(int argc, const char **argv) { struct oid_array array = OID_ARRAY_INIT; struct strbuf line = STRBUF_INIT; @@ -19,11 +19,11 @@ int cmd__sha1_array(int argc, const char **argv) if (skip_prefix(line.buf, "append ", &arg)) { if (get_oid_hex(arg, &oid)) - die("not a hexadecimal SHA1: %s", arg); + die("not a hexadecimal oid: %s", arg); oid_array_append(&array, &oid); } else if (skip_prefix(line.buf, "lookup ", &arg)) { if (get_oid_hex(arg, &oid)) - die("not a hexadecimal SHA1: %s", arg); + die("not a hexadecimal oid: %s", arg); printf("%d\n", oid_array_lookup(&array, &oid)); } else if (!strcmp(line.buf, "clear")) oid_array_clear(&array); diff --git a/t/helper/test-path-utils.c b/t/helper/test-path-utils.c index 409034cf4e..313a153209 100644 --- a/t/helper/test-path-utils.c +++ b/t/helper/test-path-utils.c @@ -290,11 +290,14 @@ int cmd__path_utils(int argc, const char **argv) } if (argc >= 2 && !strcmp(argv[1], "real_path")) { + struct strbuf realpath = STRBUF_INIT; while (argc > 2) { - puts(real_path(argv[2])); + strbuf_realpath(&realpath, argv[2], 1); + puts(realpath.buf); argc--; argv++; } + strbuf_release(&realpath); return 0; } diff --git a/t/helper/test-pkt-line.c b/t/helper/test-pkt-line.c index 282d536384..12ca698e17 100644 --- a/t/helper/test-pkt-line.c +++ b/t/helper/test-pkt-line.c @@ -67,7 +67,7 @@ static void unpack_sideband(void) case PACKET_READ_NORMAL: band = reader.line[0] & 0xff; if (band < 1 || band > 2) - die("unexpected side band %d", band); + continue; /* skip non-sideband packets */ fd = band; write_or_die(fd, reader.line + 1, reader.pktlen - 1); diff --git a/t/helper/test-repository.c b/t/helper/test-repository.c index f7f8618445..56f0e3c1be 100644 --- a/t/helper/test-repository.c +++ b/t/helper/test-repository.c @@ -19,12 +19,11 @@ static void test_parse_commit_in_graph(const char *gitdir, const char *worktree, memset(the_repository, 0, sizeof(*the_repository)); - /* TODO: Needed for temporary hack in hashcmp, see 183a638b7da. */ - repo_set_hash_algo(the_repository, GIT_HASH_SHA1); - if (repo_init(&r, gitdir, worktree)) die("Couldn't init repo"); + repo_set_hash_algo(the_repository, hash_algo_by_ptr(r.hash_algo)); + c = lookup_commit(&r, commit_oid); if (!parse_commit_in_graph(&r, c)) @@ -50,12 +49,11 @@ static void test_get_commit_tree_in_graph(const char *gitdir, memset(the_repository, 0, sizeof(*the_repository)); - /* TODO: Needed for temporary hack in hashcmp, see 183a638b7da. */ - repo_set_hash_algo(the_repository, GIT_HASH_SHA1); - if (repo_init(&r, gitdir, worktree)) die("Couldn't init repo"); + repo_set_hash_algo(the_repository, hash_algo_by_ptr(r.hash_algo)); + c = lookup_commit(&r, commit_oid); /* @@ -75,6 +73,10 @@ static void test_get_commit_tree_in_graph(const char *gitdir, int cmd__repository(int argc, const char **argv) { + int nongit_ok = 0; + + setup_git_directory_gently(&nongit_ok); + if (argc < 2) die("must have at least 2 arguments"); if (!strcmp(argv[1], "parse_commit_in_graph")) { diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c index c9a232d238..2ece4d1ebf 100644 --- a/t/helper/test-tool.c +++ b/t/helper/test-tool.c @@ -14,6 +14,7 @@ struct test_cmd { }; static struct test_cmd cmds[] = { + { "advise", cmd__advise_if_enabled }, { "chmtime", cmd__chmtime }, { "config", cmd__config }, { "ctype", cmd__ctype }, @@ -36,6 +37,7 @@ static struct test_cmd cmds[] = { { "match-trees", cmd__match_trees }, { "mergesort", cmd__mergesort }, { "mktemp", cmd__mktemp }, + { "oid-array", cmd__oid_array }, { "oidmap", cmd__oidmap }, { "online-cpus", cmd__online_cpus }, { "parse-options", cmd__parse_options }, @@ -56,7 +58,6 @@ static struct test_cmd cmds[] = { { "scrap-cache-tree", cmd__scrap_cache_tree }, { "serve-v2", cmd__serve_v2 }, { "sha1", cmd__sha1 }, - { "sha1-array", cmd__sha1_array }, { "sha256", cmd__sha256 }, { "sigchain", cmd__sigchain }, { "strcmp-offset", cmd__strcmp_offset }, @@ -111,6 +112,7 @@ int cmd_main(int argc, const char **argv) argc--; trace2_cmd_name(cmds[i].name); trace2_cmd_list_config(); + trace2_cmd_list_env_vars(); return cmds[i].fn(argc, argv); } } diff --git a/t/helper/test-tool.h b/t/helper/test-tool.h index c8549fd87f..1cbaec02f3 100644 --- a/t/helper/test-tool.h +++ b/t/helper/test-tool.h @@ -4,6 +4,7 @@ #define USE_THE_INDEX_COMPATIBILITY_MACROS #include "git-compat-util.h" +int cmd__advise_if_enabled(int argc, const char **argv); int cmd__chmtime(int argc, const char **argv); int cmd__config(int argc, const char **argv); int cmd__ctype(int argc, const char **argv); @@ -46,7 +47,7 @@ int cmd__run_command(int argc, const char **argv); int cmd__scrap_cache_tree(int argc, const char **argv); int cmd__serve_v2(int argc, const char **argv); int cmd__sha1(int argc, const char **argv); -int cmd__sha1_array(int argc, const char **argv); +int cmd__oid_array(int argc, const char **argv); int cmd__sha256(int argc, const char **argv); int cmd__sigchain(int argc, const char **argv); int cmd__strcmp_offset(int argc, const char **argv); diff --git a/t/lib-credential.sh b/t/lib-credential.sh index 937b831ea6..dea2cbef51 100755..100644 --- a/t/lib-credential.sh +++ b/t/lib-credential.sh @@ -1,4 +1,5 @@ -#!/bin/sh +# Shell library for testing credential handling including helpers. See t0302 +# for an example of testing a specific helper. # Try a set of credential helpers; the expected stdin, # stdout and stderr should be provided on stdin, @@ -19,7 +20,7 @@ check() { false fi && test_cmp expect-stdout stdout && - test_cmp expect-stderr stderr + test_i18ncmp expect-stderr stderr } read_chunk() { diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index 8d28652b72..9fc5241228 100755..100644 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -1,14 +1,25 @@ -#!/bin/sh +# We always set GNUPGHOME, even if no usable GPG was found, as +# +# - It does not hurt, and +# +# - we cannot set global environment variables in lazy prereqs because they are +# executed in an eval'ed subshell that changes the working directory to a +# temporary one. + +GNUPGHOME="$PWD/gpghome" +export GNUPGHOME + +test_lazy_prereq GPG ' + gpg_version=$(gpg --version 2>&1) + test $? != 127 || exit 1 -gpg_version=$(gpg --version 2>&1) -if test $? != 127 -then # As said here: http://www.gnupg.org/documentation/faqs.html#q6.19 - # the gpg version 1.0.6 didn't parse trust packets correctly, so for + # the gpg version 1.0.6 did not parse trust packets correctly, so for # that version, creation of signed tags using the generated key fails. case "$gpg_version" in - 'gpg (GnuPG) 1.0.6'*) + "gpg (GnuPG) 1.0.6"*) say "Your version of gpg (1.0.6) is too buggy for testing" + exit 1 ;; *) # Available key info: @@ -27,55 +38,54 @@ then # To export ownertrust: # gpg --homedir /tmp/gpghome --export-ownertrust \ # > lib-gpg/ownertrust - mkdir ./gpghome && - chmod 0700 ./gpghome && - GNUPGHOME="$(pwd)/gpghome" && - export GNUPGHOME && - (gpgconf --kill gpg-agent >/dev/null 2>&1 || : ) && - gpg --homedir "${GNUPGHOME}" 2>/dev/null --import \ + mkdir "$GNUPGHOME" && + chmod 0700 "$GNUPGHOME" && + (gpgconf --kill gpg-agent || : ) && + gpg --homedir "${GNUPGHOME}" --import \ "$TEST_DIRECTORY"/lib-gpg/keyring.gpg && - gpg --homedir "${GNUPGHOME}" 2>/dev/null --import-ownertrust \ + gpg --homedir "${GNUPGHOME}" --import-ownertrust \ "$TEST_DIRECTORY"/lib-gpg/ownertrust && - gpg --homedir "${GNUPGHOME}" </dev/null >/dev/null 2>&1 \ - --sign -u committer@example.com && - test_set_prereq GPG && - # Available key info: - # * see t/lib-gpg/gpgsm-gen-key.in - # To generate new certificate: - # * no passphrase - # gpgsm --homedir /tmp/gpghome/ \ - # -o /tmp/gpgsm.crt.user \ - # --generate-key \ - # --batch t/lib-gpg/gpgsm-gen-key.in - # To import certificate: - # gpgsm --homedir /tmp/gpghome/ \ - # --import /tmp/gpgsm.crt.user - # To export into a .p12 we can later import: - # gpgsm --homedir /tmp/gpghome/ \ - # -o t/lib-gpg/gpgsm_cert.p12 \ - # --export-secret-key-p12 "committer@example.com" - echo | gpgsm --homedir "${GNUPGHOME}" 2>/dev/null \ - --passphrase-fd 0 --pinentry-mode loopback \ - --import "$TEST_DIRECTORY"/lib-gpg/gpgsm_cert.p12 && - - gpgsm --homedir "${GNUPGHOME}" 2>/dev/null -K | - grep fingerprint: | - cut -d" " -f4 | - tr -d '\n' >"${GNUPGHOME}/trustlist.txt" && - - echo " S relax" >>"${GNUPGHOME}/trustlist.txt" && - echo hello | gpgsm --homedir "${GNUPGHOME}" >/dev/null \ - -u committer@example.com -o /dev/null --sign - 2>&1 && - test_set_prereq GPGSM + gpg --homedir "${GNUPGHOME}" </dev/null >/dev/null \ + --sign -u committer@example.com ;; esac -fi +' + +test_lazy_prereq GPGSM ' + test_have_prereq GPG && + # Available key info: + # * see t/lib-gpg/gpgsm-gen-key.in + # To generate new certificate: + # * no passphrase + # gpgsm --homedir /tmp/gpghome/ \ + # -o /tmp/gpgsm.crt.user \ + # --generate-key \ + # --batch t/lib-gpg/gpgsm-gen-key.in + # To import certificate: + # gpgsm --homedir /tmp/gpghome/ \ + # --import /tmp/gpgsm.crt.user + # To export into a .p12 we can later import: + # gpgsm --homedir /tmp/gpghome/ \ + # -o t/lib-gpg/gpgsm_cert.p12 \ + # --export-secret-key-p12 "committer@example.com" + echo | gpgsm --homedir "${GNUPGHOME}" \ + --passphrase-fd 0 --pinentry-mode loopback \ + --import "$TEST_DIRECTORY"/lib-gpg/gpgsm_cert.p12 && + + gpgsm --homedir "${GNUPGHOME}" -K | + grep fingerprint: | + cut -d" " -f4 | + tr -d "\\n" >"${GNUPGHOME}/trustlist.txt" && + + echo " S relax" >>"${GNUPGHOME}/trustlist.txt" && + echo hello | gpgsm --homedir "${GNUPGHOME}" >/dev/null \ + -u committer@example.com -o /dev/null --sign - +' -if test_have_prereq GPG && - echo | gpg --homedir "${GNUPGHOME}" -b --rfc1991 >/dev/null 2>&1 -then - test_set_prereq RFC1991 -fi +test_lazy_prereq RFC1991 ' + test_have_prereq GPG && + echo | gpg --homedir "${GNUPGHOME}" -b --rfc1991 >/dev/null +' sanitize_pgp() { perl -ne ' diff --git a/t/lib-log-graph.sh b/t/lib-log-graph.sh index 1184cceef2..1184cceef2 100755..100644 --- a/t/lib-log-graph.sh +++ b/t/lib-log-graph.sh diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index 1dd17fc03e..64fc6487dd 100755..100644 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -297,7 +297,7 @@ test_submodule_content () { # - Directory containing tracked files replaced by submodule # - Submodule replaced by tracked files in directory # - Submodule replaced by tracked file with the same name -# - tracked file replaced by submodule +# - Tracked file replaced by submodule # # The default is that submodule contents aren't changed until "git submodule # update" is run. And even then that command doesn't delete the work tree of @@ -621,11 +621,13 @@ test_submodule_forced_switch () { # - Directory containing tracked files replaced by submodule # - Submodule replaced by tracked files in directory # - Submodule replaced by tracked file with the same name -# - tracked file replaced by submodule +# - Tracked file replaced by submodule # # New test cases # - Removing a submodule with a git directory absorbs the submodules # git directory first into the superproject. +# - Switching from no submodule to nested submodules +# - Switching from nested submodules to no submodule # Internal function; use test_submodule_switch_recursing_with_args() or # test_submodule_forced_switch_recursing_with_args() instead. @@ -658,22 +660,6 @@ test_submodule_recursing_with_args_common() { test_submodule_content sub1 origin/add_sub1 ) ' - test_expect_success "$command: submodule branch is not changed, detach HEAD instead" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git -C sub1 checkout -b keep_branch && - git -C sub1 rev-parse HEAD >expect && - git branch -t modify_sub1 origin/modify_sub1 && - $command modify_sub1 && - test_superproject_content origin/modify_sub1 && - test_submodule_content sub1 origin/modify_sub1 && - git -C sub1 rev-parse keep_branch >actual && - test_cmp expect actual && - test_must_fail git -C sub1 symbolic-ref HEAD - ) - ' # Replacing a tracked file with a submodule produces a checked out submodule test_expect_success "$command: replace tracked file with submodule checks out submodule" ' @@ -699,6 +685,19 @@ test_submodule_recursing_with_args_common() { test_submodule_content sub1 origin/replace_directory_with_sub1 ) ' + # Switching to a commit with nested submodules recursively checks them out + test_expect_success "$command: nested submodules are checked out" ' + prolog && + reset_work_tree_to_interested no_submodule && + ( + cd submodule_update && + git branch -t modify_sub1_recursively origin/modify_sub1_recursively && + $command modify_sub1_recursively && + test_superproject_content origin/modify_sub1_recursively && + test_submodule_content sub1 origin/modify_sub1_recursively && + test_submodule_content -C sub1 sub2 origin/modify_sub1_recursively + ) + ' ######################## Disappearing submodule ####################### # Removing a submodule removes its work tree ... @@ -762,6 +761,21 @@ test_submodule_recursing_with_args_common() { ) ' + # Switching to a commit without nested submodules removes their worktrees + test_expect_success "$command: worktrees of nested submodules are removed" ' + prolog && + reset_work_tree_to_interested add_nested_sub && + ( + cd submodule_update && + git branch -t no_submodule origin/no_submodule && + $command no_submodule && + test_superproject_content origin/no_submodule && + ! test_path_is_dir sub1 && + test_must_fail git config -f .git/modules/sub1/config core.worktree && + test_must_fail git config -f .git/modules/sub1/modules/sub2/config core.worktree + ) + ' + ########################## Modified submodule ######################### # Updating a submodule sha1 updates the submodule's work tree test_expect_success "$command: modified submodule updates submodule work tree" ' @@ -789,6 +803,23 @@ test_submodule_recursing_with_args_common() { test_submodule_content sub1 origin/add_sub1 ) ' + # Updating a submodule does not touch the currently checked out branch in the submodule + test_expect_success "$command: submodule branch is not changed, detach HEAD instead" ' + prolog && + reset_work_tree_to_interested add_sub1 && + ( + cd submodule_update && + git -C sub1 checkout -b keep_branch && + git -C sub1 rev-parse HEAD >expect && + git branch -t modify_sub1 origin/modify_sub1 && + $command modify_sub1 && + test_superproject_content origin/modify_sub1 && + test_submodule_content sub1 origin/modify_sub1 && + git -C sub1 rev-parse keep_branch >actual && + test_cmp expect actual && + test_must_fail git -C sub1 symbolic-ref HEAD + ) + ' } # Declares and invokes several tests that, in various situations, checks that @@ -908,7 +939,6 @@ test_submodule_switch_recursing_with_args () { ) ' - # recursing deeper than one level doesn't work yet. test_expect_success "$command: modified submodule updates submodule recursively" ' prolog && reset_work_tree_to_interested add_nested_sub && diff --git a/t/perf/p5310-pack-bitmaps.sh b/t/perf/p5310-pack-bitmaps.sh index 7743f4f4c9..80c53edca7 100755 --- a/t/perf/p5310-pack-bitmaps.sh +++ b/t/perf/p5310-pack-bitmaps.sh @@ -31,10 +31,6 @@ test_perf 'simulated fetch' ' } | git pack-objects --revs --stdout >/dev/null ' -test_perf 'pack to file' ' - git pack-objects --all pack1 </dev/null >/dev/null -' - test_perf 'pack to file (bitmap)' ' git pack-objects --use-bitmap-index --all pack1b </dev/null >/dev/null ' diff --git a/t/perf/p9300-fast-import-export.sh b/t/perf/p9300-fast-import-export.sh new file mode 100755 index 0000000000..586161e9ad --- /dev/null +++ b/t/perf/p9300-fast-import-export.sh @@ -0,0 +1,23 @@ +#!/bin/sh + +test_description='test fast-import and fast-export performance' +. ./perf-lib.sh + +test_perf_default_repo + +# Use --no-data here to produce a vastly smaller export file. +# This is much cheaper to work with but should still exercise +# fast-import pretty well (we'll still process all commits and +# trees, which account for 60% or more of objects in most repos). +# +# Use --reencode to avoid the default of aborting on non-utf8 commits, +# which lets this test run against a wider variety of sample repos. +test_perf 'export (no-blobs)' ' + git fast-export --reencode=yes --no-data HEAD >export +' + +test_perf 'import (no-blobs)' ' + git fast-import --force <export +' + +test_done diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 3e440c078d..b859721620 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -833,6 +833,19 @@ then exit 1 fi +test_expect_success 'lazy prereqs do not turn off tracing' " + run_sub_test_lib_test lazy-prereq-and-tracing \ + 'lazy prereqs and -x' -v -x <<-\\EOF && + test_lazy_prereq LAZY true + + test_expect_success lazy 'test_have_prereq LAZY && echo trace' + + test_done + EOF + + grep 'echo trace' lazy-prereq-and-tracing/err +" + test_expect_success 'tests clean up even on failures' " run_sub_test_lib_test_err \ failing-cleanup 'Failing tests with cleanup commands' <<-\\EOF && diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 26f8206326..1edd5aeb8f 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -392,13 +392,6 @@ test_expect_success SYMLINKS 're-init to move gitdir symlink' ' test_path_is_dir realgitdir/refs ' -# Tests for the hidden file attribute on windows -is_hidden () { - # Use the output of `attrib`, ignore the absolute path - case "$(attrib "$1")" in *H*?:*) return 0;; esac - return 1 -} - test_expect_success MINGW '.git hidden' ' rm -rf newdir && ( @@ -406,7 +399,7 @@ test_expect_success MINGW '.git hidden' ' mkdir newdir && cd newdir && git init && - is_hidden .git + test_path_is_hidden .git ) && check_config newdir/.git false unset ' diff --git a/t/t0007-git-var.sh b/t/t0007-git-var.sh index 1f600e2cae..88b9ae8158 100755 --- a/t/t0007-git-var.sh +++ b/t/t0007-git-var.sh @@ -17,7 +17,7 @@ test_expect_success 'get GIT_COMMITTER_IDENT' ' test_cmp expect actual ' -test_expect_success !FAIL_PREREQS,!AUTOIDENT 'requested identites are strict' ' +test_expect_success !FAIL_PREREQS,!AUTOIDENT 'requested identities are strict' ' ( sane_unset GIT_COMMITTER_NAME && sane_unset GIT_COMMITTER_EMAIL && diff --git a/t/t0018-advice.sh b/t/t0018-advice.sh new file mode 100755 index 0000000000..e03554d2f3 --- /dev/null +++ b/t/t0018-advice.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +test_description='Test advise_if_enabled functionality' + +. ./test-lib.sh + +test_expect_success 'advice should be printed when config variable is unset' ' + cat >expect <<-\EOF && + hint: This is a piece of advice + hint: Disable this message with "git config advice.nestedTag false" + EOF + test-tool advise "This is a piece of advice" 2>actual && + test_i18ncmp expect actual +' + +test_expect_success 'advice should be printed when config variable is set to true' ' + cat >expect <<-\EOF && + hint: This is a piece of advice + hint: Disable this message with "git config advice.nestedTag false" + EOF + test_config advice.nestedTag true && + test-tool advise "This is a piece of advice" 2>actual && + test_i18ncmp expect actual +' + +test_expect_success 'advice should not be printed when config variable is set to false' ' + test_config advice.nestedTag false && + test-tool advise "This is a piece of advice" 2>actual && + test_must_be_empty actual +' + +test_done diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index dc664da551..4bfffa9c31 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -364,6 +364,10 @@ test_expect_success PERL 'required process filter should filter data' ' S=$(file_size test.r) && S2=$(file_size test2.r) && S3=$(file_size "testsubdir/test3 '\''sq'\'',\$x=.r") && + M=$(git hash-object test.r) && + M2=$(git hash-object test2.r) && + M3=$(git hash-object "testsubdir/test3 '\''sq'\'',\$x=.r") && + EMPTY=$(git hash-object /dev/null) && filter_git add . && cat >expected.log <<-EOF && @@ -378,14 +382,16 @@ test_expect_success PERL 'required process filter should filter data' ' test_cmp_count expected.log debug.log && git commit -m "test commit 2" && + MASTER=$(git rev-parse --verify master) && + META="ref=refs/heads/master treeish=$MASTER" && rm -f test2.r "testsubdir/test3 '\''sq'\'',\$x=.r" && filter_git checkout --quiet --no-progress . && cat >expected.log <<-EOF && START init handshake complete - IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] - IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $S3 [OK] -- OUT: $S3 . [OK] + IN: smudge test2.r blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -406,10 +412,10 @@ test_expect_success PERL 'required process filter should filter data' ' cat >expected.log <<-EOF && START init handshake complete - IN: smudge test.r $S [OK] -- OUT: $S . [OK] - IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] - IN: smudge test4-empty.r 0 [OK] -- OUT: 0 [OK] - IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $S3 [OK] -- OUT: $S3 . [OK] + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -420,6 +426,117 @@ test_expect_success PERL 'required process filter should filter data' ' ) ' +test_expect_success PERL 'required process filter should filter data for various subcommands' ' + test_config_global filter.protocol.process "rot13-filter.pl debug.log clean smudge" && + test_config_global filter.protocol.required true && + ( + cd repo && + + S=$(file_size test.r) && + S2=$(file_size test2.r) && + S3=$(file_size "testsubdir/test3 '\''sq'\'',\$x=.r") && + M=$(git hash-object test.r) && + M2=$(git hash-object test2.r) && + M3=$(git hash-object "testsubdir/test3 '\''sq'\'',\$x=.r") && + EMPTY=$(git hash-object /dev/null) && + + MASTER=$(git rev-parse --verify master) && + + cp "$TEST_ROOT/test.o" test5.r && + git add test5.r && + git commit -m "test commit 3" && + git checkout empty-branch && + filter_git rebase --onto empty-branch master^^ master && + MASTER2=$(git rev-parse --verify master) && + META="ref=refs/heads/master treeish=$MASTER2" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge test5.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + git reset --hard empty-branch && + filter_git reset --hard $MASTER && + META="treeish=$MASTER" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + git branch old-master $MASTER && + git reset --hard empty-branch && + filter_git reset --hard old-master && + META="ref=refs/heads/old-master treeish=$MASTER" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + git checkout -b merge empty-branch && + git branch -f master $MASTER2 && + filter_git merge master && + META="treeish=$MASTER2" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge test5.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + filter_git archive master >/dev/null && + META="ref=refs/heads/master treeish=$MASTER2" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge test5.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + TREE="$(git rev-parse $MASTER2^{tree})" && + filter_git archive $TREE >/dev/null && + META="treeish=$TREE" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge test5.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log + ) +' + test_expect_success PERL 'required process filter takes precedence' ' test_config_global filter.protocol.clean false && test_config_global filter.protocol.process "rot13-filter.pl debug.log clean" && @@ -519,17 +636,22 @@ test_expect_success PERL 'required process filter should process multiple packet EOF test_cmp_count expected.log debug.log && - rm -f *.file && + M1="blob=$(git hash-object 1pkt_1__.file)" && + M2="blob=$(git hash-object 2pkt_1+1.file)" && + M3="blob=$(git hash-object 2pkt_2-1.file)" && + M4="blob=$(git hash-object 2pkt_2__.file)" && + M5="blob=$(git hash-object 3pkt_2+1.file)" && + rm -f *.file debug.log && filter_git checkout --quiet --no-progress -- *.file && cat >expected.log <<-EOF && START init handshake complete - IN: smudge 1pkt_1__.file $(($S )) [OK] -- OUT: $(($S )) . [OK] - IN: smudge 2pkt_1+1.file $(($S +1)) [OK] -- OUT: $(($S +1)) .. [OK] - IN: smudge 2pkt_2-1.file $(($S*2-1)) [OK] -- OUT: $(($S*2-1)) .. [OK] - IN: smudge 2pkt_2__.file $(($S*2 )) [OK] -- OUT: $(($S*2 )) .. [OK] - IN: smudge 3pkt_2+1.file $(($S*2+1)) [OK] -- OUT: $(($S*2+1)) ... [OK] + IN: smudge 1pkt_1__.file $M1 $(($S )) [OK] -- OUT: $(($S )) . [OK] + IN: smudge 2pkt_1+1.file $M2 $(($S +1)) [OK] -- OUT: $(($S +1)) .. [OK] + IN: smudge 2pkt_2-1.file $M3 $(($S*2-1)) [OK] -- OUT: $(($S*2-1)) .. [OK] + IN: smudge 2pkt_2__.file $M4 $(($S*2 )) [OK] -- OUT: $(($S*2 )) .. [OK] + IN: smudge 3pkt_2+1.file $M5 $(($S*2+1)) [OK] -- OUT: $(($S*2+1)) ... [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -578,6 +700,10 @@ test_expect_success PERL 'process filter should restart after unexpected write f S=$(file_size test.r) && S2=$(file_size test2.r) && SF=$(file_size smudge-write-fail.r) && + M=$(git hash-object test.r) && + M2=$(git hash-object test2.r) && + MF=$(git hash-object smudge-write-fail.r) && + rm -f debug.log && git add . && rm -f *.r && @@ -591,11 +717,11 @@ test_expect_success PERL 'process filter should restart after unexpected write f cat >expected.log <<-EOF && START init handshake complete - IN: smudge smudge-write-fail.r $SF [OK] -- [WRITE FAIL] + IN: smudge smudge-write-fail.r blob=$MF $SF [OK] -- [WRITE FAIL] START init handshake complete - IN: smudge test.r $S [OK] -- OUT: $S . [OK] - IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test.r blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -629,6 +755,10 @@ test_expect_success PERL 'process filter should not be restarted if it signals a S=$(file_size test.r) && S2=$(file_size test2.r) && SE=$(file_size error.r) && + M=$(git hash-object test.r) && + M2=$(git hash-object test2.r) && + ME=$(git hash-object error.r) && + rm -f debug.log && git add . && rm -f *.r && @@ -637,9 +767,9 @@ test_expect_success PERL 'process filter should not be restarted if it signals a cat >expected.log <<-EOF && START init handshake complete - IN: smudge error.r $SE [OK] -- [ERROR] - IN: smudge test.r $S [OK] -- OUT: $S . [OK] - IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge error.r blob=$ME $SE [OK] -- [ERROR] + IN: smudge test.r blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -665,18 +795,21 @@ test_expect_success PERL 'process filter abort stops processing of all further f echo "error this blob and all future blobs" >abort.o && cp abort.o abort.r && + M="blob=$(git hash-object abort.r)" && + rm -f debug.log && SA=$(file_size abort.r) && git add . && rm -f *.r && + # Note: This test assumes that Git filters files in alphabetical # order ("abort.r" before "test.r"). filter_git checkout --quiet --no-progress . && cat >expected.log <<-EOF && START init handshake complete - IN: smudge abort.r $SA [OK] -- [ABORT] + IN: smudge abort.r $M $SA [OK] -- [ABORT] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -727,27 +860,29 @@ test_expect_success PERL 'delayed checkout in process filter' ' ) && S=$(file_size "$TEST_ROOT/test.o") && + PM="ref=refs/heads/master treeish=$(git -C repo rev-parse --verify master) " && + M="${PM}blob=$(git -C repo rev-parse --verify master:test.a)" && cat >a.exp <<-EOF && START init handshake complete - IN: smudge test.a $S [OK] -- OUT: $S . [OK] - IN: smudge test-delay10.a $S [OK] -- [DELAYED] - IN: smudge test-delay11.a $S [OK] -- [DELAYED] - IN: smudge test-delay20.a $S [OK] -- [DELAYED] + IN: smudge test.a $M $S [OK] -- OUT: $S . [OK] + IN: smudge test-delay10.a $M $S [OK] -- [DELAYED] + IN: smudge test-delay11.a $M $S [OK] -- [DELAYED] + IN: smudge test-delay20.a $M $S [OK] -- [DELAYED] IN: list_available_blobs test-delay10.a test-delay11.a [OK] - IN: smudge test-delay10.a 0 [OK] -- OUT: $S . [OK] - IN: smudge test-delay11.a 0 [OK] -- OUT: $S . [OK] + IN: smudge test-delay10.a $M 0 [OK] -- OUT: $S . [OK] + IN: smudge test-delay11.a $M 0 [OK] -- OUT: $S . [OK] IN: list_available_blobs test-delay20.a [OK] - IN: smudge test-delay20.a 0 [OK] -- OUT: $S . [OK] + IN: smudge test-delay20.a $M 0 [OK] -- OUT: $S . [OK] IN: list_available_blobs [OK] STOP EOF cat >b.exp <<-EOF && START init handshake complete - IN: smudge test-delay10.b $S [OK] -- [DELAYED] + IN: smudge test-delay10.b $M $S [OK] -- [DELAYED] IN: list_available_blobs test-delay10.b [OK] - IN: smudge test-delay10.b 0 [OK] -- OUT: $S . [OK] + IN: smudge test-delay10.b $M 0 [OK] -- OUT: $S . [OK] IN: list_available_blobs [OK] STOP EOF @@ -767,8 +902,11 @@ test_expect_success PERL 'delayed checkout in process filter' ' rm *.a *.b && filter_git checkout . && - test_cmp_count ../a.exp a.log && - test_cmp_count ../b.exp b.log && + # We are not checking out a ref here, so filter out ref metadata. + sed -e "s!$PM!!" ../a.exp >a.exp.filtered && + sed -e "s!$PM!!" ../b.exp >b.exp.filtered && + test_cmp_count a.exp.filtered a.log && + test_cmp_count b.exp.filtered b.log && test_cmp_committed_rot13 "$TEST_ROOT/test.o" test.a && test_cmp_committed_rot13 "$TEST_ROOT/test.o" test-delay10.a && diff --git a/t/t0021/rot13-filter.pl b/t/t0021/rot13-filter.pl index 470107248e..cd32a82da5 100644 --- a/t/t0021/rot13-filter.pl +++ b/t/t0021/rot13-filter.pl @@ -135,7 +135,13 @@ while (1) { if ( exists $DELAY{$pathname} and $DELAY{$pathname}{"requested"} == 0 ) { $DELAY{$pathname}{"requested"} = 1; } + } elsif ($buffer =~ /^(ref|treeish|blob)=/) { + print $debug " $buffer"; } else { + # In general, filters need to be graceful about + # new metadata, since it's documented that we + # can pass any key-value pairs, but for tests, + # let's be a little stricter. die "Unknown message '$buffer'"; } diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index 3483b72db4..f8178ee4e3 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -54,7 +54,7 @@ Alias -A, --alias-source <string> get a string -Z, --alias-target <string> - get a string + alias of --alias-source EOF diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index 2ea2d00c39..56db5c8aba 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -476,6 +476,7 @@ test_expect_success MINGW 'is_valid_path() on Windows' ' C:\\git \ comm \ conout.c \ + com0.c \ lptN \ \ --not \ @@ -488,6 +489,7 @@ test_expect_success MINGW 'is_valid_path() on Windows' ' "AUX.c" \ "abc/conOut\$ .xyz/test" \ lpt8 \ + com9.c \ "lpt*" \ Nul \ "PRN./abc" diff --git a/t/t0064-sha1-array.sh b/t/t0064-sha1-array.sh index 5dda570b9a..45685af2fd 100755 --- a/t/t0064-sha1-array.sh +++ b/t/t0064-sha1-array.sh @@ -18,7 +18,7 @@ test_expect_success 'ordered enumeration' ' { echoid append 88 44 aa 55 && echo for_each_unique - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && test_cmp expect actual ' @@ -28,7 +28,7 @@ test_expect_success 'ordered enumeration with duplicate suppression' ' echoid append 88 44 aa 55 && echoid append 88 44 aa 55 && echo for_each_unique - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && test_cmp expect actual ' @@ -36,7 +36,7 @@ test_expect_success 'lookup' ' { echoid append 88 44 aa 55 && echoid lookup 55 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -eq 1 ' @@ -45,7 +45,7 @@ test_expect_success 'lookup non-existing entry' ' { echoid append 88 44 aa 55 && echoid lookup 33 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -lt 0 ' @@ -55,7 +55,7 @@ test_expect_success 'lookup with duplicates' ' echoid append 88 44 aa 55 && echoid append 88 44 aa 55 && echoid lookup 55 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -ge 2 && test "$n" -le 3 @@ -66,7 +66,7 @@ test_expect_success 'lookup non-existing entry with duplicates' ' echoid append 88 44 aa 55 && echoid append 88 44 aa 55 && echoid lookup 66 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -lt 0 ' @@ -81,7 +81,7 @@ test_expect_success 'lookup with almost duplicate values' ' echo "append $id1" && echo "append $id2" && echoid lookup 55 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -eq 0 ' @@ -90,7 +90,7 @@ test_expect_success 'lookup with single duplicate value' ' { echoid append 55 55 && echoid lookup 55 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -ge 0 && test "$n" -le 1 diff --git a/t/t0212-trace2-event.sh b/t/t0212-trace2-event.sh index 7065a1b937..1529155cf0 100755 --- a/t/t0212-trace2-event.sh +++ b/t/t0212-trace2-event.sh @@ -199,6 +199,43 @@ test_expect_success JSON_PP 'event stream, list config' ' test_cmp expect actual ' +# Test listing of all "interesting" environment variables. + +test_expect_success JSON_PP 'event stream, list env vars' ' + test_when_finished "rm trace.event actual expect" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" \ + GIT_TRACE2_ENV_VARS="A_VAR,OTHER_VAR,MISSING" \ + A_VAR=1 OTHER_VAR="hello world" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "001return", + | "0" + | ], + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "params":[ + | { + | "param":"A_VAR", + | "value":"1" + | }, + | { + | "param":"OTHER_VAR", + | "value":"hello world" + | } + | ], + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + test_expect_success JSON_PP 'basic trace2_data' ' test_when_finished "rm trace.event actual expect" && GIT_TRACE2_EVENT="$(pwd)/trace.event" test-tool trace2 006data test_category k1 v1 test_category k2 v2 && diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index 39f097ea9e..48484cbcf6 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -22,6 +22,11 @@ test_expect_success 'setup helper scripts' ' exit 0 EOF + write_script git-credential-quit <<-\EOF && + . ./dump + echo quit=1 + EOF + write_script git-credential-verbatim <<-\EOF && user=$1; shift pass=$1; shift @@ -35,43 +40,71 @@ test_expect_success 'setup helper scripts' ' test_expect_success 'credential_fill invokes helper' ' check fill "verbatim foo bar" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=foo password=bar -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com EOF ' test_expect_success 'credential_fill invokes multiple helpers' ' check fill useless "verbatim foo bar" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=foo password=bar -- useless: get + useless: protocol=http + useless: host=example.com verbatim: get + verbatim: protocol=http + verbatim: host=example.com EOF ' test_expect_success 'credential_fill stops when we get a full response' ' check fill "verbatim one two" "verbatim three four" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=one password=two -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com EOF ' test_expect_success 'credential_fill continues through partial response' ' check fill "verbatim one \"\"" "verbatim two three" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=two password=three -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com verbatim: get + verbatim: protocol=http + verbatim: host=example.com verbatim: username=one EOF ' @@ -97,14 +130,20 @@ test_expect_success 'credential_fill passes along metadata' ' test_expect_success 'credential_approve calls all helpers' ' check approve useless "verbatim one two" <<-\EOF + protocol=http + host=example.com username=foo password=bar -- -- useless: store + useless: protocol=http + useless: host=example.com useless: username=foo useless: password=bar verbatim: store + verbatim: protocol=http + verbatim: host=example.com verbatim: username=foo verbatim: password=bar EOF @@ -112,6 +151,8 @@ test_expect_success 'credential_approve calls all helpers' ' test_expect_success 'do not bother storing password-less credential' ' check approve useless <<-\EOF + protocol=http + host=example.com username=foo -- -- @@ -121,14 +162,20 @@ test_expect_success 'do not bother storing password-less credential' ' test_expect_success 'credential_reject calls all helpers' ' check reject useless "verbatim one two" <<-\EOF + protocol=http + host=example.com username=foo password=bar -- -- useless: erase + useless: protocol=http + useless: host=example.com useless: username=foo useless: password=bar verbatim: erase + verbatim: protocol=http + verbatim: host=example.com verbatim: username=foo verbatim: password=bar EOF @@ -136,33 +183,49 @@ test_expect_success 'credential_reject calls all helpers' ' test_expect_success 'usernames can be preserved' ' check fill "verbatim \"\" three" <<-\EOF + protocol=http + host=example.com username=one -- + protocol=http + host=example.com username=one password=three -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com verbatim: username=one EOF ' test_expect_success 'usernames can be overridden' ' check fill "verbatim two three" <<-\EOF + protocol=http + host=example.com username=one -- + protocol=http + host=example.com username=two password=three -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com verbatim: username=one EOF ' test_expect_success 'do not bother completing already-full credential' ' check fill "verbatim three four" <<-\EOF + protocol=http + host=example.com username=one password=two -- + protocol=http + host=example.com username=one password=two -- @@ -174,23 +237,31 @@ test_expect_success 'do not bother completing already-full credential' ' # askpass helper is run, we know the internal getpass is working. test_expect_success 'empty helper list falls back to internal getpass' ' check fill <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=askpass-username password=askpass-password -- - askpass: Username: - askpass: Password: + askpass: Username for '\''http://example.com'\'': + askpass: Password for '\''http://askpass-username@example.com'\'': EOF ' test_expect_success 'internal getpass does not ask for known username' ' check fill <<-\EOF + protocol=http + host=example.com username=foo -- + protocol=http + host=example.com username=foo password=askpass-password -- - askpass: Password: + askpass: Password for '\''http://foo@example.com'\'': EOF ' @@ -202,7 +273,11 @@ HELPER="!f() { test_expect_success 'respect configured credentials' ' test_config credential.helper "$HELPER" && check fill <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=foo password=bar -- @@ -419,21 +494,119 @@ test_expect_success 'context uses urlmatch' ' test_expect_success 'helpers can abort the process' ' test_must_fail git \ - -c credential.helper="!f() { echo quit=1; }; f" \ + -c credential.helper=quit \ -c credential.helper="verbatim foo bar" \ - credential fill >stdout && - test_must_be_empty stdout + credential fill >stdout 2>stderr <<-\EOF && + protocol=http + host=example.com + EOF + test_must_be_empty stdout && + cat >expect <<-\EOF && + quit: get + quit: protocol=http + quit: host=example.com + fatal: credential helper '\''quit'\'' told us to quit + EOF + test_i18ncmp expect stderr ' test_expect_success 'empty helper spec resets helper list' ' test_config credential.helper "verbatim file file" && check fill "" "verbatim cmdline cmdline" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=cmdline password=cmdline -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com + EOF +' + +test_expect_success 'url parser rejects embedded newlines' ' + test_must_fail git credential fill 2>stderr <<-\EOF && + url=https://one.example.com?%0ahost=two.example.com/ + EOF + cat >expect <<-\EOF && + warning: url contains a newline in its path component: https://one.example.com?%0ahost=two.example.com/ + fatal: credential url cannot be parsed: https://one.example.com?%0ahost=two.example.com/ + EOF + test_i18ncmp expect stderr +' + +test_expect_success 'host-less URLs are parsed as empty host' ' + check fill "verbatim foo bar" <<-\EOF + url=cert:///path/to/cert.pem + -- + protocol=cert + host= + path=path/to/cert.pem + username=foo + password=bar + -- + verbatim: get + verbatim: protocol=cert + verbatim: host= + verbatim: path=path/to/cert.pem + EOF +' + +test_expect_success 'credential system refuses to work with missing host' ' + test_must_fail git credential fill 2>stderr <<-\EOF && + protocol=http + EOF + cat >expect <<-\EOF && + fatal: refusing to work with credential missing host field + EOF + test_i18ncmp expect stderr +' + +test_expect_success 'credential system refuses to work with missing protocol' ' + test_must_fail git credential fill 2>stderr <<-\EOF && + host=example.com + EOF + cat >expect <<-\EOF && + fatal: refusing to work with credential missing protocol field + EOF + test_i18ncmp expect stderr +' + +# usage: check_host_and_path <url> <expected-host> <expected-path> +check_host_and_path () { + # we always parse the path component, but we need this to make sure it + # is passed to the helper + test_config credential.useHTTPPath true && + check fill "verbatim user pass" <<-EOF + url=$1 + -- + protocol=https + host=$2 + path=$3 + username=user + password=pass + -- + verbatim: get + verbatim: protocol=https + verbatim: host=$2 + verbatim: path=$3 EOF +} + +test_expect_success 'url parser handles bare query marker' ' + check_host_and_path https://example.com?foo.git example.com ?foo.git +' + +test_expect_success 'url parser handles bare fragment marker' ' + check_host_and_path https://example.com#foo.git example.com "#foo.git" +' + +test_expect_success 'url parser not confused by encoded markers' ' + check_host_and_path https://example.com%23%3f%2f/foo.git \ + "example.com#?/" foo.git ' test_done diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index d09eff503c..449ebc5657 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -133,6 +133,30 @@ test_expect_success 'other worktree HEAD link pointing at a funny place' ' test_i18ngrep "worktrees/other/HEAD points to something strange" out ' +test_expect_success 'commit with multiple signatures is okay' ' + git cat-file commit HEAD >basis && + cat >sigs <<-EOF && + gpgsig -----BEGIN PGP SIGNATURE----- + VGhpcyBpcyBub3QgcmVhbGx5IGEgc2lnbmF0dXJlLg== + -----END PGP SIGNATURE----- + gpgsig-sha256 -----BEGIN PGP SIGNATURE----- + VGhpcyBpcyBub3QgcmVhbGx5IGEgc2lnbmF0dXJlLg== + -----END PGP SIGNATURE----- + EOF + sed -e "/^committer/q" basis >okay && + cat sigs >>okay && + echo >>okay && + sed -e "1,/^$/d" basis >>okay && + cat okay && + new=$(git hash-object -t commit -w --stdin <okay) && + test_when_finished "remove_object $new" && + git update-ref refs/heads/bogus "$new" && + test_when_finished "git update-ref -d refs/heads/bogus" && + git fsck 2>out && + cat out && + ! grep "commit $new" out +' + test_expect_success 'email without @ is okay' ' git cat-file commit HEAD >basis && sed "s/@/AT/" basis >okay && diff --git a/t/t2402-worktree-list.sh b/t/t2402-worktree-list.sh index 69ffe865b4..52585ec2aa 100755 --- a/t/t2402-worktree-list.sh +++ b/t/t2402-worktree-list.sh @@ -152,7 +152,7 @@ test_expect_success 'linked worktrees are sorted' ' ' test_expect_success 'worktree path when called in .git directory' ' - git worktree list >list1&& + git worktree list >list1 && git -C .git worktree list >list2 && test_cmp list1 list2 ' diff --git a/t/t3402-rebase-merge.sh b/t/t3402-rebase-merge.sh index a1ec501a87..6e032716a6 100755 --- a/t/t3402-rebase-merge.sh +++ b/t/t3402-rebase-merge.sh @@ -162,4 +162,81 @@ test_expect_success 'rebase --skip works with two conflicts in a row' ' git rebase --skip ' +test_expect_success '--reapply-cherry-picks' ' + git init repo && + + # O(1-10) -- O(1-11) -- O(0-10) master + # \ + # -- O(1-11) -- O(1-12) otherbranch + + printf "Line %d\n" $(test_seq 1 10) >repo/file.txt && + git -C repo add file.txt && + git -C repo commit -m "base commit" && + + printf "Line %d\n" $(test_seq 1 11) >repo/file.txt && + git -C repo commit -a -m "add 11" && + + printf "Line %d\n" $(test_seq 0 10) >repo/file.txt && + git -C repo commit -a -m "add 0 delete 11" && + + git -C repo checkout -b otherbranch HEAD^^ && + printf "Line %d\n" $(test_seq 1 11) >repo/file.txt && + git -C repo commit -a -m "add 11 in another branch" && + + printf "Line %d\n" $(test_seq 1 12) >repo/file.txt && + git -C repo commit -a -m "add 12 in another branch" && + + # Regular rebase fails, because the 1-11 commit is deduplicated + test_must_fail git -C repo rebase --merge master 2> err && + test_i18ngrep "error: could not apply.*add 12 in another branch" err && + git -C repo rebase --abort && + + # With --reapply-cherry-picks, it works + git -C repo rebase --merge --reapply-cherry-picks master +' + +test_expect_success '--reapply-cherry-picks refrains from reading unneeded blobs' ' + git init server && + + # O(1-10) -- O(1-11) -- O(1-12) master + # \ + # -- O(0-10) otherbranch + + printf "Line %d\n" $(test_seq 1 10) >server/file.txt && + git -C server add file.txt && + git -C server commit -m "merge base" && + + printf "Line %d\n" $(test_seq 1 11) >server/file.txt && + git -C server commit -a -m "add 11" && + + printf "Line %d\n" $(test_seq 1 12) >server/file.txt && + git -C server commit -a -m "add 12" && + + git -C server checkout -b otherbranch HEAD^^ && + printf "Line %d\n" $(test_seq 0 10) >server/file.txt && + git -C server commit -a -m "add 0" && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + + git clone --filter=blob:none "file://$(pwd)/server" client && + git -C client checkout origin/master && + git -C client checkout origin/otherbranch && + + # Sanity check to ensure that the blobs from the merge base and "add + # 11" are missing + git -C client rev-list --objects --all --missing=print >missing_list && + MERGE_BASE_BLOB=$(git -C server rev-parse master^^:file.txt) && + ADD_11_BLOB=$(git -C server rev-parse master^:file.txt) && + grep "[?]$MERGE_BASE_BLOB" missing_list && + grep "[?]$ADD_11_BLOB" missing_list && + + git -C client rebase --merge --reapply-cherry-picks origin/master && + + # The blob from the merge base had to be fetched, but not "add 11" + git -C client rev-list --objects --all --missing=print >missing_list && + ! grep "[?]$MERGE_BASE_BLOB" missing_list && + grep "[?]$ADD_11_BLOB" missing_list +' + test_done diff --git a/t/t3403-rebase-skip.sh b/t/t3403-rebase-skip.sh index ee8a8dba52..a927774910 100755 --- a/t/t3403-rebase-skip.sh +++ b/t/t3403-rebase-skip.sh @@ -29,6 +29,13 @@ test_expect_success setup ' test_tick && git commit -m reverted-goodbye && git tag reverted-goodbye && + git checkout goodbye && + test_tick && + GIT_AUTHOR_NAME="Another Author" \ + GIT_AUTHOR_EMAIL="another.author@example.com" \ + git commit --amend --no-edit -m amended-goodbye && + test_tick && + git tag amended-goodbye && git checkout -f skip-reference && echo moo > hello && @@ -85,6 +92,78 @@ test_expect_success 'moved back to branch correctly' ' test_debug 'gitk --all & sleep 1' +test_expect_success 'correct advice upon picking empty commit' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase -i --onto goodbye \ + amended-goodbye^ amended-goodbye 2>err && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git rebase --skip" err && + test_must_fail git commit && + test_i18ngrep "git rebase --skip" err +' + +test_expect_success 'correct authorship when committing empty pick' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase -i --onto goodbye \ + amended-goodbye^ amended-goodbye && + git commit --allow-empty && + git log --pretty=format:"%an <%ae>%n%ad%B" -1 amended-goodbye >expect && + git log --pretty=format:"%an <%ae>%n%ad%B" -1 HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'correct advice upon rewording empty commit' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="reword 1" git rebase -i \ + --onto goodbye amended-goodbye^ amended-goodbye 2>err + ) && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git rebase --skip" err && + test_must_fail git commit && + test_i18ngrep "git rebase --skip" err +' + +test_expect_success 'correct advice upon editing empty commit' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="edit 1" git rebase -i \ + --onto goodbye amended-goodbye^ amended-goodbye 2>err + ) && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git rebase --skip" err && + test_must_fail git commit && + test_i18ngrep "git rebase --skip" err +' + +test_expect_success 'correct advice upon cherry-picking an empty commit during a rebase' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 exec_git_cherry-pick_amended-goodbye" \ + git rebase -i goodbye^ goodbye 2>err + ) && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git cherry-pick --skip" err && + test_must_fail git commit 2>err && + test_i18ngrep "git cherry-pick --skip" err +' + +test_expect_success 'correct advice upon multi cherry-pick picking an empty commit during a rebase' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 exec_git_cherry-pick_goodbye_amended-goodbye" \ + git rebase -i goodbye^^ goodbye 2>err + ) && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git cherry-pick --skip" err && + test_must_fail git commit 2>err && + test_i18ngrep "git cherry-pick --skip" err +' + test_expect_success 'fixup that empties commit fails' ' test_when_finished "git rebase --abort" && ( diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index c5ce3ab760..4a7d21f898 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -187,7 +187,7 @@ test_expect_success 'no changes are a nop' ' git checkout branch2 && git rebase -i F && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" && - test $(git rev-parse I) = $(git rev-parse HEAD) + test_cmp_rev I HEAD ' test_expect_success 'test the [branch] option' ' @@ -196,16 +196,16 @@ test_expect_success 'test the [branch] option' ' git commit -m "stop here" && git rebase -i F branch2 && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" && - test $(git rev-parse I) = $(git rev-parse branch2) && - test $(git rev-parse I) = $(git rev-parse HEAD) + test_cmp_rev I branch2 && + test_cmp_rev I HEAD ' test_expect_success 'test --onto <branch>' ' git checkout -b test-onto branch2 && git rebase -i --onto branch1 F && test "$(git symbolic-ref -q HEAD)" = "refs/heads/test-onto" && - test $(git rev-parse HEAD^) = $(git rev-parse branch1) && - test $(git rev-parse I) = $(git rev-parse branch2) + test_cmp_rev HEAD^ branch1 && + test_cmp_rev I branch2 ' test_expect_success 'rebase on top of a non-conflicting commit' ' @@ -214,12 +214,12 @@ test_expect_success 'rebase on top of a non-conflicting commit' ' git rebase -i branch2 && test file6 = $(git diff --name-only original-branch1) && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" && - test $(git rev-parse I) = $(git rev-parse branch2) && - test $(git rev-parse I) = $(git rev-parse HEAD~2) + test_cmp_rev I branch2 && + test_cmp_rev I HEAD~2 ' test_expect_success 'reflog for the branch shows state before rebase' ' - test $(git rev-parse branch1@{1}) = $(git rev-parse original-branch1) + test_cmp_rev branch1@{1} original-branch1 ' test_expect_success 'reflog for the branch shows correct finish message' ' @@ -279,7 +279,7 @@ test_expect_success 'show conflicted patch' ' test_expect_success 'abort' ' git rebase --abort && - test $(git rev-parse new-branch1) = $(git rev-parse HEAD) && + test_cmp_rev new-branch1 HEAD && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" && test_path_is_missing .git/rebase-merge ' @@ -322,7 +322,7 @@ test_expect_success 'retain authorship w/ conflicts' ' echo resolved >conflict && git add conflict && git rebase --continue && - test $(git rev-parse conflict-a^0) = $(git rev-parse HEAD^) && + test_cmp_rev conflict-a^0 HEAD^ && git show >out && grep AttributeMe out ' @@ -339,7 +339,7 @@ test_expect_success 'squash' ' git rebase -i --onto master HEAD~2 ) && test B = $(cat file7) && - test $(git rev-parse HEAD^) = $(git rev-parse master) + test_cmp_rev HEAD^ master ' test_expect_success 'retain authorship when squashing' ' @@ -398,9 +398,9 @@ test_expect_success REBASE_P 'preserve merges with -p' ' git update-index --refresh && git diff-files --quiet && git diff-index --quiet --cached HEAD -- && - test $(git rev-parse HEAD~6) = $(git rev-parse branch1) && - test $(git rev-parse HEAD~4^2) = $(git rev-parse to-be-preserved) && - test $(git rev-parse HEAD^^2^) = $(git rev-parse HEAD^^^) && + test_cmp_rev HEAD~6 branch1 && + test_cmp_rev HEAD~4^2 to-be-preserved && + test_cmp_rev HEAD^^2^ HEAD^^^ && test $(git show HEAD~5:file1) = B && test $(git show HEAD~3:file1) = C && test $(git show HEAD:file1) = E && @@ -432,7 +432,7 @@ test_expect_success '--continue tries to commit' ' git add file1 && FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue ) && - test $(git rev-parse HEAD^) = $(git rev-parse new-branch1) && + test_cmp_rev HEAD^ new-branch1 && git show HEAD | grep chouette ' @@ -739,7 +739,7 @@ test_expect_success 'do "noop" when there is nothing to cherry-pick' ' --author="Somebody else <somebody@else.com>" && test $(git rev-parse branch3) != $(git rev-parse branch4) && git rebase -i branch3 && - test $(git rev-parse branch3) = $(git rev-parse branch4) + test_cmp_rev branch3 branch4 ' @@ -798,7 +798,7 @@ test_expect_success 'rebase -i continue with unstaged submodule' ' test_must_fail git rebase -i submodule-base && git reset && git rebase --continue && - test $(git rev-parse submodule-base) = $(git rev-parse HEAD) + test_cmp_rev submodule-base HEAD ' test_expect_success 'avoid unnecessary reset' ' @@ -821,7 +821,7 @@ test_expect_success 'reword' ' git rebase -i A && git show HEAD | grep "E changed" && test $(git rev-parse master) != $(git rev-parse HEAD) && - test $(git rev-parse master^) = $(git rev-parse HEAD^) && + test_cmp_rev master^ HEAD^ && FAKE_LINES="1 2 reword 3 4" FAKE_COMMIT_MESSAGE="D changed" \ git rebase -i A && git show HEAD^ | grep "D changed" && @@ -885,7 +885,7 @@ test_expect_success 'always cherry-pick with --no-ff' ' git diff HEAD~$p original-no-ff-branch~$p > out && test_must_be_empty out done && - test $(git rev-parse HEAD~3) = $(git rev-parse original-no-ff-branch~3) && + test_cmp_rev HEAD~3 original-no-ff-branch~3 && git diff HEAD~3 original-no-ff-branch~3 > out && test_must_be_empty out ' @@ -1734,6 +1734,32 @@ test_expect_success 'post-commit hook is called' ' test_cmp expect actual ' +test_expect_success 'correct error message for partial commit after empty pick' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + FAKE_LINES="2 1 1" && + export FAKE_LINES && + test_must_fail git rebase -i A D + ) && + echo x >file1 && + test_must_fail git commit file1 2>err && + test_i18ngrep "cannot do a partial commit during a rebase." err +' + +test_expect_success 'correct error message for commit --amend after empty pick' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + FAKE_LINES="1 1" && + export FAKE_LINES && + test_must_fail git rebase -i A D + ) && + echo x>file1 && + test_must_fail git commit -a --amend 2>err && + test_i18ngrep "middle of a rebase -- cannot amend." err +' + # This must be the last test in this file test_expect_success '$EDITOR and friends are unchanged' ' test_editor_unchanged diff --git a/t/t3406-rebase-message.sh b/t/t3406-rebase-message.sh index 61b76f3301..927a4f4a4e 100755 --- a/t/t3406-rebase-message.sh +++ b/t/t3406-rebase-message.sh @@ -89,22 +89,22 @@ test_expect_success 'GIT_REFLOG_ACTION' ' git checkout -b reflog-topic start && test_commit reflog-to-rebase && - git rebase --apply reflog-onto && + git rebase reflog-onto && git log -g --format=%gs -3 >actual && cat >expect <<-\EOF && - rebase finished: returning to refs/heads/reflog-topic - rebase: reflog-to-rebase - rebase: checkout reflog-onto + rebase (finish): returning to refs/heads/reflog-topic + rebase (pick): reflog-to-rebase + rebase (start): checkout reflog-onto EOF test_cmp expect actual && git checkout -b reflog-prefix reflog-to-rebase && - GIT_REFLOG_ACTION=change-the-reflog git rebase --apply reflog-onto && + GIT_REFLOG_ACTION=change-the-reflog git rebase reflog-onto && git log -g --format=%gs -3 >actual && cat >expect <<-\EOF && - rebase finished: returning to refs/heads/reflog-prefix - change-the-reflog: reflog-to-rebase - change-the-reflog: checkout reflog-onto + change-the-reflog (finish): returning to refs/heads/reflog-prefix + change-the-reflog (pick): reflog-to-rebase + change-the-reflog (start): checkout reflog-onto EOF test_cmp expect actual ' diff --git a/t/t3417-rebase-whitespace-fix.sh b/t/t3417-rebase-whitespace-fix.sh index e85cdc7037..946e92f8da 100755 --- a/t/t3417-rebase-whitespace-fix.sh +++ b/t/t3417-rebase-whitespace-fix.sh @@ -52,7 +52,7 @@ test_expect_success 'blank line at end of file; extend at end of file' ' git commit --allow-empty -m "Initial empty commit" && git add file && git commit -m first && mv second file && - git add file && git commit -m second && + git add file && git commit -m second && git rebase --whitespace=fix HEAD^^ && git diff --exit-code HEAD^:file expect-first && test_cmp expect-second file @@ -118,7 +118,7 @@ test_expect_success 'at beginning of file' ' for i in 1 2 3 4 5; do echo $i done >> file && - git commit -m more file && + git commit -m more file && git rebase --whitespace=fix HEAD^^ && test_cmp expect-beginning file ' diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh index d934583776..1f32faa4a4 100755 --- a/t/t3419-rebase-patch-id.sh +++ b/t/t3419-rebase-patch-id.sh @@ -4,15 +4,6 @@ test_description='git rebase - test patch id computation' . ./test-lib.sh -count () { - i=0 - while test $i -lt $1 - do - echo "$i" - i=$(($i+1)) - done -} - scramble () { i=0 while read x @@ -26,76 +17,55 @@ scramble () { mv -f "$1.new" "$1" } -run () { - echo \$ "$@" - /usr/bin/time "$@" >/dev/null -} - test_expect_success 'setup' ' git commit --allow-empty -m initial && git tag root ' -do_tests () { - nlines=$1 pr=${2-} - - test_expect_success $pr "setup: $nlines lines" " - rm -f .gitattributes && - git checkout -q -f master && - git reset --hard root && - count $nlines >file && - git add file && - git commit -q -m initial && - git branch -f other && - - scramble file && - git add file && - git commit -q -m 'change big file' && - - git checkout -q other && - : >newfile && - git add newfile && - git commit -q -m 'add small file' && - - git cherry-pick master >/dev/null 2>&1 - " - - test_debug " - run git diff master^\! - " - - test_expect_success $pr 'setup attributes' " - echo 'file binary' >.gitattributes - " - - test_debug " - run git format-patch --stdout master && - run git format-patch --stdout --ignore-if-in-upstream master - " +test_expect_success 'setup: 500 lines' ' + rm -f .gitattributes && + git checkout -q -f master && + git reset --hard root && + test_seq 500 >file && + git add file && + git commit -q -m initial && + git branch -f other && + + scramble file && + git add file && + git commit -q -m "change big file" && + + git checkout -q other && + : >newfile && + git add newfile && + git commit -q -m "add small file" && + + git cherry-pick master >/dev/null 2>&1 +' - test_expect_success $pr 'detect upstream patch' ' - git checkout -q master && - scramble file && - git add file && - git commit -q -m "change big file again" && - git checkout -q other^{} && - git rebase master && - git rev-list master...HEAD~ >revs && - test_must_be_empty revs - ' +test_expect_success 'setup attributes' ' + echo "file binary" >.gitattributes +' - test_expect_success $pr 'do not drop patch' ' - git branch -f squashed master && - git checkout -q -f squashed && - git reset -q --soft HEAD~2 && - git commit -q -m squashed && - git checkout -q other^{} && - test_must_fail git rebase squashed && - git rebase --quit - ' -} +test_expect_success 'detect upstream patch' ' + git checkout -q master && + scramble file && + git add file && + git commit -q -m "change big file again" && + git checkout -q other^{} && + git rebase master && + git rev-list master...HEAD~ >revs && + test_must_be_empty revs +' -do_tests 500 -do_tests 50000 EXPENSIVE +test_expect_success 'do not drop patch' ' + git branch -f squashed master && + git checkout -q -f squashed && + git reset -q --soft HEAD~2 && + git commit -q -m squashed && + git checkout -q other^{} && + test_must_fail git rebase squashed && + git rebase --quit +' test_done diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index cf8dfd6c20..4a9204b4b6 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -220,14 +220,13 @@ test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 shift - test_expect_$result "rebase $* --keep-empty" " + test_expect_$result "rebase $* --no-keep-empty drops begin-empty commits" " reset_rebase && - git rebase $* --keep-empty c l && - test_cmp_rev c HEAD~3 && - test_linear_range 'd k l' c.. + git rebase $* --no-keep-empty c l && + test_cmp_rev c HEAD~2 && + test_linear_range 'd l' c.. " } -test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -242,7 +241,6 @@ test_run_rebase () { test_linear_range 'd k l' j.. " } -test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p diff --git a/t/t3424-rebase-empty.sh b/t/t3424-rebase-empty.sh index e1e30517ea..5e1045a0af 100755 --- a/t/t3424-rebase-empty.sh +++ b/t/t3424-rebase-empty.sh @@ -123,6 +123,42 @@ test_expect_success 'rebase --interactive uses default of --empty=ask' ' test_cmp expect actual ' +test_expect_success 'rebase --merge --empty=drop --keep-empty' ' + git checkout -B testing localmods && + git rebase --merge --empty=drop --keep-empty upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=drop --no-keep-empty' ' + git checkout -B testing localmods && + git rebase --merge --empty=drop --no-keep-empty upstream && + + test_write_lines C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=keep --keep-empty' ' + git checkout -B testing localmods && + git rebase --merge --empty=keep --keep-empty upstream && + + test_write_lines D C2 C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=keep --no-keep-empty' ' + git checkout -B testing localmods && + git rebase --merge --empty=keep --no-keep-empty upstream && + + test_write_lines C2 C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + test_expect_success 'rebase --merge does not leave state laying around' ' git checkout -B testing localmods~2 && git rebase --merge upstream && diff --git a/t/t3431-rebase-fork-point.sh b/t/t3431-rebase-fork-point.sh index 78851b9a2a..172562789e 100755 --- a/t/t3431-rebase-fork-point.sh +++ b/t/t3431-rebase-fork-point.sh @@ -47,11 +47,31 @@ test_rebase 'G F B A' --keep-base test_rebase 'G F C E D B A' --no-fork-point test_rebase 'G F C D B A' --no-fork-point --onto D test_rebase 'G F C B A' --no-fork-point --keep-base + test_rebase 'G F E D B A' --fork-point refs/heads/master +test_rebase 'G F E D B A' --fork-point master + test_rebase 'G F D B A' --fork-point --onto D refs/heads/master +test_rebase 'G F D B A' --fork-point --onto D master + test_rebase 'G F B A' --fork-point --keep-base refs/heads/master +test_rebase 'G F B A' --fork-point --keep-base master + test_rebase 'G F C E D B A' refs/heads/master +test_rebase 'G F C E D B A' master + test_rebase 'G F C D B A' --onto D refs/heads/master +test_rebase 'G F C D B A' --onto D master + test_rebase 'G F C B A' --keep-base refs/heads/master +test_rebase 'G F C B A' --keep-base master + +test_expect_success 'git rebase --fork-point with ambigous refname' ' + git checkout master && + git checkout -b one && + git checkout side && + git tag one && + test_must_fail git rebase --fork-point --onto D one +' test_done diff --git a/t/t3432-rebase-fast-forward.sh b/t/t3432-rebase-fast-forward.sh index 6c9d4a1375..6f0452c0ea 100755 --- a/t/t3432-rebase-fast-forward.sh +++ b/t/t3432-rebase-fast-forward.sh @@ -28,10 +28,12 @@ test_rebase_same_head () { shift && cmp_f="$1" && shift && - test_rebase_same_head_ $status_n $what_n $cmp_n " --apply" "$*" && - test_rebase_same_head_ $status_f $what_f $cmp_f " --apply --no-ff" "$*" - test_rebase_same_head_ $status_n $what_n $cmp_n " --merge" "$*" && - test_rebase_same_head_ $status_f $what_f $cmp_f " --merge --no-ff" "$*" + test_rebase_same_head_ $status_n $what_n $cmp_n 0 " --apply" "$*" && + test_rebase_same_head_ $status_f $what_f $cmp_f 0 " --apply --no-ff" "$*" + test_rebase_same_head_ $status_n $what_n $cmp_n 0 " --merge" "$*" && + test_rebase_same_head_ $status_f $what_f $cmp_f 0 " --merge --no-ff" "$*" + test_rebase_same_head_ $status_n $what_n $cmp_n 1 " --merge" "$*" && + test_rebase_same_head_ $status_f $what_f $cmp_f 1 " --merge --no-ff" "$*" } test_rebase_same_head_ () { @@ -41,9 +43,21 @@ test_rebase_same_head_ () { shift && cmp="$1" && shift && + abbreviate="$1" && + shift && flag="$1" shift && - test_expect_$status "git rebase$flag $* with $changes is $what with $cmp HEAD" " + if test $abbreviate -eq 1 + then + msg="git rebase$flag $* (rebase.abbreviateCommands = true) with $changes is $what with $cmp HEAD" + else + msg="git rebase$flag $* with $changes is $what with $cmp HEAD" + fi && + test_expect_$status "$msg" " + if test $abbreviate -eq 1 + then + test_config rebase.abbreviateCommands true + fi && oldhead=\$(git rev-parse HEAD) && test_when_finished 'git reset --hard \$oldhead' && cp .git/logs/HEAD expect && diff --git a/t/t3435-rebase-gpg-sign.sh b/t/t3435-rebase-gpg-sign.sh new file mode 100755 index 0000000000..b47c59c190 --- /dev/null +++ b/t/t3435-rebase-gpg-sign.sh @@ -0,0 +1,71 @@ +#!/bin/sh +# +# Copyright (c) 2020 Doan Tran Cong Danh +# + +test_description='test rebase --[no-]gpg-sign' + +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-rebase.sh" +. "$TEST_DIRECTORY/lib-gpg.sh" + +if ! test_have_prereq GPG +then + skip_all='skip all test rebase --[no-]gpg-sign, gpg not available' + test_done +fi + +test_rebase_gpg_sign () { + local must_fail= will=will fake_editor= + if test "x$1" = "x!" + then + must_fail=test_must_fail + will="won't" + shift + fi + conf=$1 + shift + test_expect_success "rebase $* with commit.gpgsign=$conf $will sign commit" " + git reset two && + git config commit.gpgsign $conf && + set_fake_editor && + FAKE_LINES='r 1 p 2' git rebase --force-rebase --root $* && + $must_fail git verify-commit HEAD^ && + $must_fail git verify-commit HEAD + " +} + +test_expect_success 'setup' ' + test_commit one && + test_commit two && + test_must_fail git verify-commit HEAD && + test_must_fail git verify-commit HEAD^ +' + +test_expect_success 'setup: merge commit' ' + test_commit fork-point && + git switch -c side && + test_commit three && + git switch master && + git merge --no-ff side && + git tag merged +' + +test_rebase_gpg_sign ! false +test_rebase_gpg_sign true +test_rebase_gpg_sign ! true --no-gpg-sign +test_rebase_gpg_sign ! true --gpg-sign --no-gpg-sign +test_rebase_gpg_sign false --no-gpg-sign --gpg-sign +test_rebase_gpg_sign true -i +test_rebase_gpg_sign ! true -i --no-gpg-sign +test_rebase_gpg_sign ! true -i --gpg-sign --no-gpg-sign +test_rebase_gpg_sign false -i --no-gpg-sign --gpg-sign + +test_expect_failure 'rebase -p --no-gpg-sign override commit.gpgsign' ' + git reset --hard merged && + git config commit.gpgsign true && + git rebase -p --no-gpg-sign --onto=one fork-point master && + test_must_fail git verify-commit HEAD +' + +test_done diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh index 9bd482ce3b..752bc43487 100755 --- a/t/t3507-cherry-pick-conflict.sh +++ b/t/t3507-cherry-pick-conflict.sh @@ -161,6 +161,29 @@ test_expect_success 'successful commit clears CHERRY_PICK_HEAD' ' test_must_fail git rev-parse --verify CHERRY_PICK_HEAD ' + +test_expect_success 'partial commit of cherry-pick fails' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + echo resolved >foo && + git add foo && + test_must_fail git commit foo 2>err && + + test_i18ngrep "cannot do a partial commit during a cherry-pick." err +' + +test_expect_success 'commit --amend of cherry-pick fails' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + echo resolved >foo && + git add foo && + test_must_fail git commit --amend 2>err && + + test_i18ngrep "in the middle of a cherry-pick -- cannot amend." err +' + test_expect_success 'successful final commit clears cherry-pick state' ' pristine_detach initial && diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index 793bcc7fe3..5b94fdaa67 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -123,7 +123,8 @@ test_expect_success 'revert --skip to skip commit' ' test_expect_success 'skip "empty" commit' ' pristine_detach picked && test_commit dummy foo d && - test_must_fail git cherry-pick anotherpick && + test_must_fail git cherry-pick anotherpick 2>err && + test_i18ngrep "git cherry-pick --skip" err && git cherry-pick --skip && test_cmp_rev dummy HEAD ' diff --git a/t/t3514-cherry-pick-revert-gpg.sh b/t/t3514-cherry-pick-revert-gpg.sh new file mode 100755 index 0000000000..5b2e250eaa --- /dev/null +++ b/t/t3514-cherry-pick-revert-gpg.sh @@ -0,0 +1,86 @@ +#!/bin/sh +# +# Copyright (c) 2020 Doan Tran Cong Danh +# + +test_description='test {cherry-pick,revert} --[no-]gpg-sign' + +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-gpg.sh" + +if ! test_have_prereq GPG +then + skip_all='skip all test {cherry-pick,revert} --[no-]gpg-sign, gpg not available' + test_done +fi + +test_gpg_sign () { + local must_fail= will=will fake_editor= + if test "x$1" = "x!" + then + must_fail=test_must_fail + will="won't" + shift + fi + conf=$1 + cmd=$2 + cmit=$3 + shift 3 + test_expect_success "$cmd $* $cmit with commit.gpgsign=$conf $will sign commit" " + git reset --hard tip && + git config commit.gpgsign $conf && + git $cmd $* $cmit && + git rev-list tip.. >rev-list && + $must_fail git verify-commit \$(cat rev-list) + " +} + +test_expect_success 'setup' ' + test_commit one && + git switch -c side && + test_commit side1 && + test_commit side2 && + git switch - && + test_commit two && + test_commit three && + test_commit tip +' + +test_gpg_sign ! false cherry-pick side +test_gpg_sign ! false cherry-pick ..side +test_gpg_sign true cherry-pick side +test_gpg_sign true cherry-pick ..side +test_gpg_sign ! true cherry-pick side --no-gpg-sign +test_gpg_sign ! true cherry-pick ..side --no-gpg-sign +test_gpg_sign ! true cherry-pick side --gpg-sign --no-gpg-sign +test_gpg_sign ! true cherry-pick ..side --gpg-sign --no-gpg-sign +test_gpg_sign false cherry-pick side --no-gpg-sign --gpg-sign +test_gpg_sign false cherry-pick ..side --no-gpg-sign --gpg-sign +test_gpg_sign true cherry-pick side --edit +test_gpg_sign true cherry-pick ..side --edit +test_gpg_sign ! true cherry-pick side --edit --no-gpg-sign +test_gpg_sign ! true cherry-pick ..side --edit --no-gpg-sign +test_gpg_sign ! true cherry-pick side --edit --gpg-sign --no-gpg-sign +test_gpg_sign ! true cherry-pick ..side --edit --gpg-sign --no-gpg-sign +test_gpg_sign false cherry-pick side --edit --no-gpg-sign --gpg-sign +test_gpg_sign false cherry-pick ..side --edit --no-gpg-sign --gpg-sign + +test_gpg_sign ! false revert HEAD --edit +test_gpg_sign ! false revert two.. --edit +test_gpg_sign true revert HEAD --edit +test_gpg_sign true revert two.. --edit +test_gpg_sign ! true revert HEAD --edit --no-gpg-sign +test_gpg_sign ! true revert two.. --edit --no-gpg-sign +test_gpg_sign ! true revert HEAD --edit --gpg-sign --no-gpg-sign +test_gpg_sign ! true revert two.. --edit --gpg-sign --no-gpg-sign +test_gpg_sign false revert HEAD --edit --no-gpg-sign --gpg-sign +test_gpg_sign false revert two.. --edit --no-gpg-sign --gpg-sign +test_gpg_sign true revert HEAD --no-edit +test_gpg_sign true revert two.. --no-edit +test_gpg_sign ! true revert HEAD --no-edit --no-gpg-sign +test_gpg_sign ! true revert two.. --no-edit --no-gpg-sign +test_gpg_sign ! true revert HEAD --no-edit --gpg-sign --no-gpg-sign +test_gpg_sign ! true revert two.. --no-edit --gpg-sign --no-gpg-sign +test_gpg_sign false revert HEAD --no-edit --no-gpg-sign --gpg-sign + +test_done diff --git a/t/t3700-add.sh b/t/t3700-add.sh index 88bc799807..b7d4ba608c 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -192,7 +192,7 @@ test_expect_success 'git add --refresh with pathspec' ' test_must_be_empty actual && git diff-files --name-only >actual && - ! grep bar actual&& + ! grep bar actual && grep baz actual ' diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index 5bae6e50f1..b3d8bb7577 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -780,7 +780,7 @@ test_expect_success 'add -p patch editing works with pathological context lines' test_expect_success 'checkout -p works with pathological context lines' ' test_write_lines a a a a a a >a && git add a && - test_write_lines a b a b a b a b a b a > a&& + test_write_lines a b a b a b a b a b a >a && test_write_lines s n n y q | git checkout -p && test_write_lines a b a b a a b a b a >expect && test_cmp expect a diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 3ad23e2502..9f7ca98967 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -1290,4 +1290,18 @@ test_expect_success 'stash handles skip-worktree entries nicely' ' git rev-parse --verify refs/stash:A.t ' +test_expect_success 'stash -c stash.useBuiltin=false warning ' ' + expected="stash.useBuiltin support has been removed" && + + git -c stash.useBuiltin=false stash 2>err && + test_i18ngrep "$expected" err && + env GIT_TEST_STASH_USE_BUILTIN=false git stash 2>err && + test_i18ngrep "$expected" err && + + git -c stash.useBuiltin=true stash 2>err && + test_must_be_empty err && + env GIT_TEST_STASH_USE_BUILTIN=true git stash 2>err && + test_must_be_empty err +' + test_done diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index b653dd7d44..db7e733af9 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -1161,6 +1161,59 @@ test_expect_success 'format-patch wraps extremely long from-header (rfc2047)' ' ' cat >expect <<'EOF' +From: Foö Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar + Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo + Bar Foo Bar Foo Bar Foo Bar <author@example.com> +EOF +test_expect_success 'format-patch wraps extremely long from-header (non-ASCII without Q-encoding)' ' + echo content >>file && + git add file && + GIT_AUTHOR_NAME="Foö Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar" \ + git commit -m author-check && + git format-patch --no-encode-email-headers --stdout -1 >patch && + sed -n "/^From: /p; /^ /p; /^$/q" patch >actual && + test_cmp expect actual +' + +cat >expect <<'EOF' +Subject: [PATCH] Foö +EOF +test_expect_success 'subject lines are unencoded with --no-encode-email-headers' ' + echo content >>file && + git add file && + git commit -m "Foö" && + git format-patch --no-encode-email-headers -1 --stdout >patch && + grep ^Subject: patch >actual && + test_cmp expect actual +' + +cat >expect <<'EOF' +Subject: [PATCH] Foö +EOF +test_expect_success 'subject lines are unencoded with format.encodeEmailHeaders=false' ' + echo content >>file && + git add file && + git commit -m "Foö" && + git config format.encodeEmailHeaders false && + git format-patch -1 --stdout >patch && + grep ^Subject: patch >actual && + test_cmp expect actual +' + +cat >expect <<'EOF' +Subject: [PATCH] =?UTF-8?q?Fo=C3=B6?= +EOF +test_expect_success '--encode-email-headers overrides format.encodeEmailHeaders' ' + echo content >>file && + git add file && + git commit -m "Foö" && + git config format.encodeEmailHeaders false && + git format-patch --encode-email-headers -1 --stdout >patch && + grep ^Subject: patch >actual && + test_cmp expect actual +' + +cat >expect <<'EOF' Subject: header with . in it EOF test_expect_success 'subject lines do not have 822 atom-quoting' ' diff --git a/t/t4057-diff-combined-paths.sh b/t/t4057-diff-combined-paths.sh index 4f4b541658..0b78573733 100755 --- a/t/t4057-diff-combined-paths.sh +++ b/t/t4057-diff-combined-paths.sh @@ -14,7 +14,7 @@ diffc_verify () { test_expect_success 'trivial merge - combine-diff empty' ' for i in $(test_seq 1 9) do - echo $i >$i.txt && + echo $i >$i.txt && git add $i.txt done && git commit -m "init" && diff --git a/t/t4061-diff-indent.sh b/t/t4061-diff-indent.sh index 2affd7a100..0f7a6d97a8 100755 --- a/t/t4061-diff-indent.sh +++ b/t/t4061-diff-indent.sh @@ -17,7 +17,7 @@ compare_diff () { # Compare blame output using the expectation for a diff as reference. # Only look for the lines coming from non-boundary commits. compare_blame () { - sed -n -e "1,4d" -e "s/^\+//p" <"$1" >.tmp-1 + sed -n -e "1,4d" -e "s/^+//p" <"$1" >.tmp-1 sed -ne "s/^[^^][^)]*) *//p" <"$2" >.tmp-2 test_cmp .tmp-1 .tmp-2 && rm -f .tmp-1 .tmp-2 } diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index 971a5a7512..0ca29821ec 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -52,6 +52,13 @@ test_fix () { # find touched lines $DIFF file target | sed -n -e "s/^> //p" >fixed + # busybox's diff(1) doesn't output normal format + if ! test -s fixed + then + $DIFF -u file target | + grep -v '^+++ target' | + sed -ne "/^+/s/+//p" >fixed + fi # the changed lines are all expected to change fixed_cnt=$(wc -l <fixed) diff --git a/t/t4150-am.sh b/t/t4150-am.sh index cb45271457..bda4586a79 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -166,7 +166,7 @@ test_expect_success setup ' test_tick && git commit -m third && - git format-patch --stdout first >patch2 && + git format-patch --stdout first >patch2 && git checkout -b lorem && sed -n -e "11,\$p" msg >file && diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 0f766ba65f..5eeb739f3e 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -1627,6 +1627,66 @@ test_expect_success GPG 'log --graph --show-signature for merged tag in shallow grep "tag signed_tag_shallow names a non-parent $hash" actual ' +test_expect_success GPG 'log --graph --show-signature for merged tag with missing key' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b plain-nokey master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-nokey master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_nokey && + git checkout plain-nokey && + git merge --no-ff -m msg signed_tag_nokey && + GNUPGHOME=. git log --graph --show-signature -n1 plain-nokey >actual && + grep "^|\\\ merged tag" actual && + grep "^| | gpg: Signature made" actual && + grep "^| | gpg: Can'"'"'t check signature: \(public key not found\|No public key\)" actual +' + +test_expect_success GPG 'log --graph --show-signature for merged tag with bad signature' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b plain-bad master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-bad master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_bad && + git cat-file tag signed_tag_bad >raw && + sed -e "s/signed_tag_msg/forged/" raw >forged && + git hash-object -w -t tag forged >forged.tag && + git checkout plain-bad && + git merge --no-ff -m msg "$(cat forged.tag)" && + git log --graph --show-signature -n1 plain-bad >actual && + grep "^|\\\ merged tag" actual && + grep "^| | gpg: Signature made" actual && + grep "^| | gpg: BAD signature from" actual +' + +test_expect_success GPG 'log --show-signature for merged tag with GPG failure' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b plain-fail master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-fail master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_fail && + git checkout plain-fail && + git merge --no-ff -m msg signed_tag_fail && + TMPDIR="$(pwd)/bogus" git log --show-signature -n1 plain-fail >actual && + grep "^merged tag" actual && + grep "^No signature" actual && + ! grep "^gpg: Signature made" actual +' + test_expect_success GPGSM 'log --graph --show-signature for merged tag x509' ' test_when_finished "git reset --hard && git checkout master" && test_config gpg.format x509 && @@ -1648,6 +1708,51 @@ test_expect_success GPGSM 'log --graph --show-signature for merged tag x509' ' grep "^| | gpgsm: Good signature" actual ' +test_expect_success GPGSM 'log --graph --show-signature for merged tag x509 missing key' ' + test_when_finished "git reset --hard && git checkout master" && + test_config gpg.format x509 && + test_config user.signingkey $GIT_COMMITTER_EMAIL && + git checkout -b plain-x509-nokey master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-x509-nokey master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_x509_nokey && + git checkout plain-x509-nokey && + git merge --no-ff -m msg signed_tag_x509_nokey && + GNUPGHOME=. git log --graph --show-signature -n1 plain-x509-nokey >actual && + grep "^|\\\ merged tag" actual && + grep "^| | gpgsm: certificate not found" actual +' + +test_expect_success GPGSM 'log --graph --show-signature for merged tag x509 bad signature' ' + test_when_finished "git reset --hard && git checkout master" && + test_config gpg.format x509 && + test_config user.signingkey $GIT_COMMITTER_EMAIL && + git checkout -b plain-x509-bad master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-x509-bad master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_x509_bad && + git cat-file tag signed_tag_x509_bad >raw && + sed -e "s/signed_tag_msg/forged/" raw >forged && + git hash-object -w -t tag forged >forged.tag && + git checkout plain-x509-bad && + git merge --no-ff -m msg "$(cat forged.tag)" && + git log --graph --show-signature -n1 plain-x509-bad >actual && + grep "^|\\\ merged tag" actual && + grep "^| | gpgsm: Signature made" actual && + grep "^| | gpgsm: invalid signature" actual +' + + test_expect_success GPG '--no-show-signature overrides --show-signature' ' git log -1 --show-signature --no-show-signature signed >actual && ! grep "^gpg:" actual diff --git a/t/t4208-log-magic-pathspec.sh b/t/t4208-log-magic-pathspec.sh index 4c8f3b8e1b..6cdbe4747a 100755 --- a/t/t4208-log-magic-pathspec.sh +++ b/t/t4208-log-magic-pathspec.sh @@ -55,6 +55,10 @@ test_expect_success '"git log -- :/a" should not be ambiguous' ' git log -- :/a ' +test_expect_success '"git log :/any/path/" should not segfault' ' + test_must_fail git log :/any/path/ +' + # This differs from the ":/a" check above in that :/in looks like a pathspec, # but doesn't match an actual file. test_expect_success '"git log :/in" should not be ambiguous' ' diff --git a/t/t5003-archive-zip.sh b/t/t5003-archive-zip.sh index 106eddbd85..3b76d2eb65 100755 --- a/t/t5003-archive-zip.sh +++ b/t/t5003-archive-zip.sh @@ -7,12 +7,12 @@ test_description='git archive --format=zip test' SUBSTFORMAT=%H%n test_lazy_prereq UNZIP_SYMLINKS ' - ( - mkdir unzip-symlinks && - cd unzip-symlinks && - "$GIT_UNZIP" "$TEST_DIRECTORY"/t5003/infozip-symlinks.zip && - test -h symlink - ) + "$GIT_UNZIP" "$TEST_DIRECTORY"/t5003/infozip-symlinks.zip && + test -h symlink +' + +test_lazy_prereq UNZIP_CONVERT ' + "$GIT_UNZIP" -a "$TEST_DIRECTORY"/t5003/infozip-symlinks.zip ' check_zip() { @@ -39,33 +39,33 @@ check_zip() { extracted=${dir_with_prefix}a original=a - test_expect_success UNZIP " extract ZIP archive with EOL conversion" ' + test_expect_success UNZIP_CONVERT " extract ZIP archive with EOL conversion" ' (mkdir $dir && cd $dir && "$GIT_UNZIP" -a ../$zipfile) ' - test_expect_success UNZIP " validate that text files are converted" " + test_expect_success UNZIP_CONVERT " validate that text files are converted" " test_cmp_bin $extracted/text.cr $extracted/text.crlf && test_cmp_bin $extracted/text.cr $extracted/text.lf " - test_expect_success UNZIP " validate that binary files are unchanged" " + test_expect_success UNZIP_CONVERT " validate that binary files are unchanged" " test_cmp_bin $original/binary.cr $extracted/binary.cr && test_cmp_bin $original/binary.crlf $extracted/binary.crlf && test_cmp_bin $original/binary.lf $extracted/binary.lf " - test_expect_success UNZIP " validate that diff files are converted" " + test_expect_success UNZIP_CONVERT " validate that diff files are converted" " test_cmp_bin $extracted/diff.cr $extracted/diff.crlf && test_cmp_bin $extracted/diff.cr $extracted/diff.lf " - test_expect_success UNZIP " validate that -diff files are unchanged" " + test_expect_success UNZIP_CONVERT " validate that -diff files are unchanged" " test_cmp_bin $original/nodiff.cr $extracted/nodiff.cr && test_cmp_bin $original/nodiff.crlf $extracted/nodiff.crlf && test_cmp_bin $original/nodiff.lf $extracted/nodiff.lf " - test_expect_success UNZIP " validate that custom diff is unchanged " " + test_expect_success UNZIP_CONVERT " validate that custom diff is unchanged " " test_cmp_bin $original/custom.cr $extracted/custom.cr && test_cmp_bin $original/custom.crlf $extracted/custom.crlf && test_cmp_bin $original/custom.lf $extracted/custom.lf diff --git a/t/t5319-multi-pack-index.sh b/t/t5319-multi-pack-index.sh index 43a7a66c9d..030a7222b2 100755 --- a/t/t5319-multi-pack-index.sh +++ b/t/t5319-multi-pack-index.sh @@ -42,10 +42,15 @@ test_expect_success 'setup' ' EOF ' -test_expect_success 'write midx with no packs' ' - test_when_finished rm -f pack/multi-pack-index && - git multi-pack-index --object-dir=. write && - midx_read_expect 0 0 4 . +test_expect_success "don't write midx with no packs" ' + test_must_fail git multi-pack-index --object-dir=. write && + test_path_is_missing pack/multi-pack-index +' + +test_expect_success "Warn if a midx contains no oid" ' + cp "$TEST_DIRECTORY"/t5319/no-objects.midx $objdir/pack/multi-pack-index && + test_must_fail git multi-pack-index verify && + rm $objdir/pack/multi-pack-index ' generate_objects () { @@ -521,10 +526,10 @@ test_expect_success 'repack with minimum size does not alter existing packs' ' cd dup && rm -rf .git/objects/pack && mv .git/objects/pack-backup .git/objects/pack && - touch -m -t 201901010000 .git/objects/pack/pack-D* && - touch -m -t 201901010001 .git/objects/pack/pack-C* && - touch -m -t 201901010002 .git/objects/pack/pack-B* && - touch -m -t 201901010003 .git/objects/pack/pack-A* && + test-tool chmtime =-5 .git/objects/pack/pack-D* && + test-tool chmtime =-4 .git/objects/pack/pack-C* && + test-tool chmtime =-3 .git/objects/pack/pack-B* && + test-tool chmtime =-2 .git/objects/pack/pack-A* && ls .git/objects/pack >expect && MINSIZE=$(test-tool path-utils file-size .git/objects/pack/*pack | sort -n | head -n 1) && git multi-pack-index repack --batch-size=$MINSIZE && diff --git a/t/t5319/no-objects.midx b/t/t5319/no-objects.midx Binary files differnew file mode 100644 index 0000000000..e466b8e086 --- /dev/null +++ b/t/t5319/no-objects.midx diff --git a/t/t5322-pack-objects-sparse.sh b/t/t5322-pack-objects-sparse.sh index 7124b5581a..a581eaf529 100755 --- a/t/t5322-pack-objects-sparse.sh +++ b/t/t5322-pack-objects-sparse.sh @@ -105,14 +105,16 @@ test_expect_success 'non-sparse pack-objects' ' test_cmp required_objects.txt nonsparse_required_objects.txt ' +# --sparse is enabled by default by pack.useSparse test_expect_success 'sparse pack-objects' ' + GIT_TEST_PACK_SPARSE=-1 && git rev-parse \ topic1 \ topic1^{tree} \ topic1:f3 \ topic1:f3/f4 \ topic1:f3/f4/data.txt | sort >expect_sparse_objects.txt && - git pack-objects --stdout --revs --sparse <packinput.txt >sparse.pack && + git pack-objects --stdout --revs <packinput.txt >sparse.pack && git index-pack -o sparse.idx sparse.pack && git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && test_cmp expect_sparse_objects.txt sparse_objects.txt diff --git a/t/t5324-split-commit-graph.sh b/t/t5324-split-commit-graph.sh index 53b2e6b455..b8b208fc3d 100755 --- a/t/t5324-split-commit-graph.sh +++ b/t/t5324-split-commit-graph.sh @@ -210,8 +210,14 @@ test_expect_success 'test merge stragety constants' ' git config core.commitGraph true && test_line_count = 2 $graphdir/commit-graph-chain && test_commit 15 && - git commit-graph write --reachable --split --size-multiple=10 --expire-time=1980-01-01 && + touch $graphdir/to-delete.graph $graphdir/to-keep.graph && + test-tool chmtime =1546362000 $graphdir/to-delete.graph && + test-tool chmtime =1546362001 $graphdir/to-keep.graph && + git commit-graph write --reachable --split --size-multiple=10 \ + --expire-time="2019-01-01 12:00 -05:00" && test_line_count = 1 $graphdir/commit-graph-chain && + test_path_is_missing $graphdir/to-delete.graph && + test_path_is_file $graphdir/to-keep.graph && ls $graphdir/graph-*.graph >graph-files && test_line_count = 3 graph-files ) && diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 04b35402c7..e98c3a0174 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -4,6 +4,14 @@ test_description='git ls-remote' . ./test-lib.sh +generate_references () { + for ref + do + oid=$(git rev-parse "$ref") && + printf '%s\t%s\n' "$oid" "$ref" || return 1 + done +} + test_expect_success setup ' >file && git add file && @@ -13,11 +21,11 @@ test_expect_success setup ' git tag mark1.1 && git tag mark1.2 && git tag mark1.10 && - git show-ref --tags -d | sed -e "s/ / /" >expected.tag && - ( - echo "$(git rev-parse HEAD) HEAD" && - git show-ref -d | sed -e "s/ / /" - ) >expected.all && + git show-ref --tags -d >expected.tag.raw && + sed -e "s/ / /" expected.tag.raw >expected.tag && + generate_references HEAD >expected.all && + git show-ref -d >refs && + sed -e "s/ / /" refs >>expected.all && git remote add self "$(pwd)/.git" ' @@ -43,34 +51,31 @@ test_expect_success 'ls-remote self' ' ' test_expect_success 'ls-remote --sort="version:refname" --tags self' ' - cat >expect <<-EOF && - $(git rev-parse mark) refs/tags/mark - $(git rev-parse mark1.1) refs/tags/mark1.1 - $(git rev-parse mark1.2) refs/tags/mark1.2 - $(git rev-parse mark1.10) refs/tags/mark1.10 - EOF + generate_references \ + refs/tags/mark \ + refs/tags/mark1.1 \ + refs/tags/mark1.2 \ + refs/tags/mark1.10 >expect && git ls-remote --sort="version:refname" --tags self >actual && test_cmp expect actual ' test_expect_success 'ls-remote --sort="-version:refname" --tags self' ' - cat >expect <<-EOF && - $(git rev-parse mark1.10) refs/tags/mark1.10 - $(git rev-parse mark1.2) refs/tags/mark1.2 - $(git rev-parse mark1.1) refs/tags/mark1.1 - $(git rev-parse mark) refs/tags/mark - EOF + generate_references \ + refs/tags/mark1.10 \ + refs/tags/mark1.2 \ + refs/tags/mark1.1 \ + refs/tags/mark >expect && git ls-remote --sort="-version:refname" --tags self >actual && test_cmp expect actual ' test_expect_success 'ls-remote --sort="-refname" --tags self' ' - cat >expect <<-EOF && - $(git rev-parse mark1.2) refs/tags/mark1.2 - $(git rev-parse mark1.10) refs/tags/mark1.10 - $(git rev-parse mark1.1) refs/tags/mark1.1 - $(git rev-parse mark) refs/tags/mark - EOF + generate_references \ + refs/tags/mark1.2 \ + refs/tags/mark1.10 \ + refs/tags/mark1.1 \ + refs/tags/mark >expect && git ls-remote --sort="-refname" --tags self >actual && test_cmp expect actual ' @@ -92,7 +97,7 @@ test_expect_success 'use "origin" when no remote specified' ' test_expect_success 'suppress "From <url>" with -q' ' git ls-remote -q 2>actual_err && - test_must_fail test_cmp exp_err actual_err + ! test_cmp exp_err actual_err ' test_expect_success 'use branch.<name>.remote if possible' ' @@ -180,8 +185,8 @@ do test_config $configsection.hiderefs refs/tags && git ls-remote . >actual && test_unconfig $configsection.hiderefs && - git ls-remote . | - sed -e "/ refs\/tags\//d" >expect && + git ls-remote . >expect.raw && + sed -e "/ refs\/tags\//d" expect.raw >expect && test_cmp expect actual ' @@ -212,17 +217,18 @@ test_expect_success 'protocol v2 supports hiderefs' ' test_expect_success 'ls-remote --symref' ' git fetch origin && - cat >expect <<-EOF && - ref: refs/heads/master HEAD - $(git rev-parse HEAD) HEAD - $(git rev-parse refs/heads/master) refs/heads/master - $(git rev-parse HEAD) refs/remotes/origin/HEAD - $(git rev-parse refs/remotes/origin/master) refs/remotes/origin/master - $(git rev-parse refs/tags/mark) refs/tags/mark - $(git rev-parse refs/tags/mark1.1) refs/tags/mark1.1 - $(git rev-parse refs/tags/mark1.10) refs/tags/mark1.10 - $(git rev-parse refs/tags/mark1.2) refs/tags/mark1.2 - EOF + echo "ref: refs/heads/master HEAD" >expect && + generate_references \ + HEAD \ + refs/heads/master >>expect && + oid=$(git rev-parse HEAD) && + echo "$oid refs/remotes/origin/HEAD" >>expect && + generate_references \ + refs/remotes/origin/master \ + refs/tags/mark \ + refs/tags/mark1.1 \ + refs/tags/mark1.10 \ + refs/tags/mark1.2 >>expect && # Protocol v2 supports sending symrefs for refs other than HEAD, so use # protocol v0 here. GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref >actual && diff --git a/t/t5521-pull-options.sh b/t/t5521-pull-options.sh index ccde8ba491..159afa7ac8 100755 --- a/t/t5521-pull-options.sh +++ b/t/t5521-pull-options.sh @@ -11,10 +11,10 @@ test_expect_success 'setup' ' git commit -m one) ' -test_expect_success 'git pull -q' ' +test_expect_success 'git pull -q --no-rebase' ' mkdir clonedq && (cd clonedq && git init && - git pull -q "../parent" >out 2>err && + git pull -q --no-rebase "../parent" >out 2>err && test_must_be_empty err && test_must_be_empty out) ' @@ -30,10 +30,10 @@ test_expect_success 'git pull -q --rebase' ' test_must_be_empty out) ' -test_expect_success 'git pull' ' +test_expect_success 'git pull --no-rebase' ' mkdir cloned && (cd cloned && git init && - git pull "../parent" >out 2>err && + git pull --no-rebase "../parent" >out 2>err && test -s err && test_must_be_empty out) ' @@ -46,10 +46,10 @@ test_expect_success 'git pull --rebase' ' test_must_be_empty out) ' -test_expect_success 'git pull -v' ' +test_expect_success 'git pull -v --no-rebase' ' mkdir clonedv && (cd clonedv && git init && - git pull -v "../parent" >out 2>err && + git pull -v --no-rebase "../parent" >out 2>err && test -s err && test_must_be_empty out) ' @@ -62,25 +62,25 @@ test_expect_success 'git pull -v --rebase' ' test_must_be_empty out) ' -test_expect_success 'git pull -v -q' ' +test_expect_success 'git pull -v -q --no-rebase' ' mkdir clonedvq && (cd clonedvq && git init && - git pull -v -q "../parent" >out 2>err && + git pull -v -q --no-rebase "../parent" >out 2>err && test_must_be_empty out && test_must_be_empty err) ' -test_expect_success 'git pull -q -v' ' +test_expect_success 'git pull -q -v --no-rebase' ' mkdir clonedqv && (cd clonedqv && git init && - git pull -q -v "../parent" >out 2>err && + git pull -q -v --no-rebase "../parent" >out 2>err && test_must_be_empty out && test -s err) ' test_expect_success 'git pull --cleanup errors early on invalid argument' ' mkdir clonedcleanup && (cd clonedcleanup && git init && - test_must_fail git pull --cleanup invalid "../parent" >out 2>err && + test_must_fail git pull --no-rebase --cleanup invalid "../parent" >out 2>err && test_must_be_empty out && test -s err) ' diff --git a/t/t5537-fetch-shallow.sh b/t/t5537-fetch-shallow.sh index 4f681dbbe1..b57209c84f 100755 --- a/t/t5537-fetch-shallow.sh +++ b/t/t5537-fetch-shallow.sh @@ -131,7 +131,7 @@ test_expect_success 'fetch that requires changes in .git/shallow is filtered' ' git init notshallow && ( cd notshallow && - git fetch ../shallow/.git refs/heads/*:refs/remotes/shallow/*&& + git fetch ../shallow/.git refs/heads/*:refs/remotes/shallow/* && git for-each-ref --format="%(refname)" >actual.refs && cat <<EOF >expect.refs && refs/remotes/shallow/no-shallow diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index b811d89cfd..50485300eb 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -248,9 +248,7 @@ test_expect_success 'fetch can handle previously-fetched .idx files' ' ' test_expect_success 'did not use upload-pack service' ' - test_might_fail grep '/git-upload-pack' <"$HTTPD_ROOT_PATH"/access.log >act && - : >exp && - test_cmp exp act + ! grep "/git-upload-pack" "$HTTPD_ROOT_PATH/access.log" ' test_expect_success 'git client shows text/plain errors' ' @@ -321,11 +319,17 @@ test_expect_success 'git client does not send an empty Accept-Language' ' ' test_expect_success 'remote-http complains cleanly about malformed urls' ' - # do not actually issue "list" or other commands, as we do not - # want to rely on what curl would actually do with such a broken - # URL. This is just about making sure we do not segfault during - # initialization. - test_must_fail git remote-http http::/example.com/repo.git + test_must_fail git remote-http http::/example.com/repo.git 2>stderr && + test_i18ngrep "url has no scheme" stderr +' + +# NEEDSWORK: Writing commands to git-remote-curl can race against the latter +# erroring out, producing SIGPIPE. Remove "ok=sigpipe" once transport-helper has +# learned to handle early remote helper failures more cleanly. +test_expect_success 'remote-http complains cleanly about empty scheme' ' + test_must_fail ok=sigpipe git ls-remote \ + http::${HTTPD_URL#http}/dumb/repo.git 2>stderr && + test_i18ngrep "url has no scheme" stderr ' test_expect_success 'redirects can be forbidden/allowed' ' diff --git a/t/t5562-http-backend-content-length.sh b/t/t5562-http-backend-content-length.sh index 4a110b307e..3f4ac71f83 100755 --- a/t/t5562-http-backend-content-length.sh +++ b/t/t5562-http-backend-content-length.sh @@ -53,15 +53,20 @@ test_expect_success 'setup' ' test_commit c1 && hash_head=$(git rev-parse HEAD) && hash_prev=$(git rev-parse HEAD~1) && - printf "want %s" "$hash_head" | packetize >fetch_body && - printf 0000 >>fetch_body && - printf "have %s" "$hash_prev" | packetize >>fetch_body && - printf done | packetize >>fetch_body && + { + packetize "want $hash_head" && + printf 0000 && + packetize "have $hash_prev" && + packetize "done" + } >fetch_body && test_copy_bytes 10 <fetch_body >fetch_body.trunc && hash_next=$(git commit-tree -p HEAD -m next HEAD^{tree}) && - printf "%s %s refs/heads/newbranch\\0report-status\\n" "$ZERO_OID" "$hash_next" | packetize >push_body && - printf 0000 >>push_body && - echo "$hash_next" | git pack-objects --stdout >>push_body && + { + printf "%s %s refs/heads/newbranch\\0report-status\\n" \ + "$ZERO_OID" "$hash_next" | packetize && + printf 0000 && + echo "$hash_next" | git pack-objects --stdout + } >push_body && test_copy_bytes 10 <push_body >push_body.trunc && : >empty_body ' diff --git a/t/t5604-clone-reference.sh b/t/t5604-clone-reference.sh index 0c74b4e21a..2f7be23044 100755 --- a/t/t5604-clone-reference.sh +++ b/t/t5604-clone-reference.sh @@ -175,7 +175,7 @@ test_expect_success 'clone using repo pointed at by gitfile as reference' ' test_expect_success 'clone and dissociate from reference' ' git init P && ( - cd P && test_commit one + cd P && test_commit one ) && git clone P Q && ( diff --git a/t/t5607-clone-bundle.sh b/t/t5607-clone-bundle.sh index 9108ff6fbd..6d5a977fcb 100755 --- a/t/t5607-clone-bundle.sh +++ b/t/t5607-clone-bundle.sh @@ -16,7 +16,7 @@ test_expect_success 'setup' ' test_expect_success '"verify" needs a worktree' ' git bundle create tip.bundle -1 master && - test_must_fail nongit git bundle verify ../tip.bundle 2>err && + nongit test_must_fail git bundle verify ../tip.bundle 2>err && test_i18ngrep "need a repository" err ' diff --git a/t/t5611-clone-config.sh b/t/t5611-clone-config.sh index 60c1ba951b..8e0fd39823 100755 --- a/t/t5611-clone-config.sh +++ b/t/t5611-clone-config.sh @@ -92,24 +92,17 @@ test_expect_success 'clone -c remote.<remote>.fetch=<refspec> --origin=<name>' ' test_cmp expect actual ' -# Tests for the hidden file attribute on windows -is_hidden () { - # Use the output of `attrib`, ignore the absolute path - case "$(attrib "$1")" in *H*?:*) return 0;; esac - return 1 -} - test_expect_success MINGW 'clone -c core.hideDotFiles' ' test_commit attributes .gitattributes "" && rm -rf child && git clone -c core.hideDotFiles=false . child && - ! is_hidden child/.gitattributes && + ! test_path_is_hidden child/.gitattributes && rm -rf child && git clone -c core.hideDotFiles=dotGitOnly . child && - ! is_hidden child/.gitattributes && + ! test_path_is_hidden child/.gitattributes && rm -rf child && git clone -c core.hideDotFiles=true . child && - is_hidden child/.gitattributes + test_path_is_hidden child/.gitattributes ' test_done diff --git a/t/t5612-clone-refspec.sh b/t/t5612-clone-refspec.sh index e36ac01661..e3b436d8ae 100755 --- a/t/t5612-clone-refspec.sh +++ b/t/t5612-clone-refspec.sh @@ -71,9 +71,9 @@ test_expect_success 'by default all branches will be kept updated' ' ( cd dir_all && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # follow both master and side git for-each-ref refs/heads >expect && @@ -87,7 +87,7 @@ test_expect_success 'by default no tags will be kept updated' ' git for-each-ref refs/tags >../actual ) && git for-each-ref refs/tags >expect && - test_must_fail test_cmp expect actual && + ! test_cmp expect actual && test_line_count = 2 actual ' @@ -104,9 +104,9 @@ test_expect_success '--single-branch while HEAD pointing at master' ' ( cd dir_master && git fetch --force && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # only follow master git for-each-ref refs/heads/master >expect && @@ -126,9 +126,9 @@ test_expect_success '--single-branch while HEAD pointing at master and --no-tags ( cd dir_master_no_tags && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # only follow master git for-each-ref refs/heads/master >expect && @@ -156,9 +156,9 @@ test_expect_success '--single-branch while HEAD pointing at side' ' ( cd dir_side && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # only follow side git for-each-ref refs/heads/side >expect && @@ -169,9 +169,9 @@ test_expect_success '--single-branch with explicit --branch side' ' ( cd dir_side2 && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # only follow side git for-each-ref refs/heads/side >expect && @@ -223,9 +223,9 @@ test_expect_success '--single-branch with detached' ' ( cd dir_detached && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # nothing test_must_be_empty actual diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh index 77bb91e976..88002b24af 100755 --- a/t/t5616-partial-clone.sh +++ b/t/t5616-partial-clone.sh @@ -49,7 +49,7 @@ test_expect_success 'do partial clone 1' ' test_expect_success 'verify that .promisor file contains refs fetched' ' ls pc1/.git/objects/pack/pack-*.promisor >promisorlist && test_line_count = 1 promisorlist && - git -C srv.bare rev-list HEAD >headhash && + git -C srv.bare rev-parse --verify HEAD >headhash && grep "$(cat headhash) HEAD" $(cat promisorlist) && grep "$(cat headhash) refs/heads/master" $(cat promisorlist) ' @@ -415,6 +415,14 @@ test_expect_success 'verify fetch downloads only one pack when updating refs' ' test_line_count = 3 pack-list ' +test_expect_success 'single-branch tag following respects partial clone' ' + git clone --single-branch -b B --filter=blob:none \ + "file://$(pwd)/srv.bare" single && + git -C single rev-parse --verify refs/tags/B && + git -C single rev-parse --verify refs/tags/A && + test_must_fail git -C single rev-parse --verify refs/tags/C +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd diff --git a/t/t5703-upload-pack-ref-in-want.sh b/t/t5703-upload-pack-ref-in-want.sh index 7fba3063bf..a34460f7d8 100755 --- a/t/t5703-upload-pack-ref-in-want.sh +++ b/t/t5703-upload-pack-ref-in-want.sh @@ -13,10 +13,7 @@ get_actual_refs () { } get_actual_commits () { - sed -n -e '/packfile/,/0000/{ - /packfile/d - p - }' <out | test-tool pkt-line unpack-sideband >o.pack && + test-tool pkt-line unpack-sideband <out >o.pack && git index-pack o.pack && git verify-pack -v o.idx >objs && grep commit objs | cut -d" " -f1 | sort >actual_commits diff --git a/t/t5704-protocol-violations.sh b/t/t5704-protocol-violations.sh new file mode 100755 index 0000000000..950cfb21fe --- /dev/null +++ b/t/t5704-protocol-violations.sh @@ -0,0 +1,33 @@ +#!/bin/sh + +test_description='Test responses to violations of the network protocol. In most +of these cases it will generally be acceptable for one side to break off +communications if the other side says something unexpected. We are mostly +making sure that we do not segfault or otherwise behave badly.' +. ./test-lib.sh + +test_expect_success 'extra delim packet in v2 ls-refs args' ' + { + packetize command=ls-refs && + printf 0001 && + # protocol expects 0000 flush here + printf 0001 + } >input && + test_must_fail env GIT_PROTOCOL=version=2 \ + git upload-pack . <input 2>err && + test_i18ngrep "expected flush after ls-refs arguments" err +' + +test_expect_success 'extra delim packet in v2 fetch args' ' + { + packetize command=fetch && + printf 0001 && + # protocol expects 0000 flush here + printf 0001 + } >input && + test_must_fail env GIT_PROTOCOL=version=2 \ + git upload-pack . <input 2>err && + test_i18ngrep "expected flush after fetch arguments" err +' + +test_done diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh index 121e5c6edb..0f04b6cddb 100755 --- a/t/t5801-remote-helpers.sh +++ b/t/t5801-remote-helpers.sh @@ -11,9 +11,15 @@ test_description='Test remote-helper import and export commands' PATH="$TEST_DIRECTORY/t5801:$PATH" compare_refs() { + fail= && + if test "x$1" = 'x!' + then + fail='!' && + shift + fi && git --git-dir="$1/.git" rev-parse --verify $2 >expect && git --git-dir="$3/.git" rev-parse --verify $4 >actual && - test_cmp expect actual + eval $fail test_cmp expect actual } test_expect_success 'setup repository' ' @@ -189,7 +195,7 @@ test_expect_success GPG 'push signed tag' ' git push origin signed-tag ) && compare_refs local signed-tag^{} server signed-tag^{} && - test_must_fail compare_refs local signed-tag server signed-tag + compare_refs ! local signed-tag server signed-tag ' test_expect_success GPG 'push signed tag with signed-tags capability' ' diff --git a/t/t6012-rev-list-simplify.sh b/t/t6012-rev-list-simplify.sh index a10f0df02b..b6fa43ace0 100755 --- a/t/t6012-rev-list-simplify.sh +++ b/t/t6012-rev-list-simplify.sh @@ -154,4 +154,124 @@ test_expect_success '--full-diff is not affected by --parents' ' test_cmp expected actual ' +# +# Create a new history to demonstrate the value of --show-pulls +# with respect to the subtleties of simplified history, --full-history, +# and --simplify-merges. +# +# .-A---M-----C--N---O---P +# / / \ \ \/ / / +# I B \ R-'`-Z' / +# \ / \/ / +# \ / /\ / +# `---X--' `---Y--' +# +# This example is explained in Documentation/rev-list-options.txt + +test_expect_success 'rebuild repo' ' + rm -rf .git * && + git init && + git switch -c main && + + echo base >file && + git add file && + test_commit I && + + echo A >file && + git add file && + test_commit A && + + git switch -c branchB I && + echo B >file && + git add file && + test_commit B && + + git switch main && + test_must_fail git merge -m "M" B && + echo A >file && + echo B >>file && + git add file && + git merge --continue && + note M && + + echo C >other && + git add other && + test_commit C && + + git switch -c branchX I && + echo X >file && + git add file && + test_commit X && + + git switch -c branchR M && + git merge -m R -Xtheirs X && + note R && + + git switch main && + git merge -m N R && + note N && + + git switch -c branchY M && + echo Y >y && + git add y && + test_commit Y && + + git switch -c branchZ C && + echo Z >z && + git add z && + test_commit Z && + + git switch main && + git merge -m O Z && + note O && + + git merge -m P Y && + note P +' + +check_result 'X I' -- file +check_result 'N R X I' --show-pulls -- file + +check_result 'P O N R X M B A I' --full-history --topo-order -- file +check_result 'N R X M B A I' --simplify-merges --topo-order --show-pulls -- file +check_result 'R X M B A I' --simplify-merges --topo-order -- file +check_result 'N M A I' --first-parent -- file +check_result 'N M A I' --first-parent --show-pulls -- file + +# --ancestry-path implies --full-history +check_result 'P O N R M' --topo-order \ + --ancestry-path A..HEAD -- file +check_result 'P O N R M' --topo-order \ + --show-pulls \ + --ancestry-path A..HEAD -- file +check_result 'P O N R M' --topo-order \ + --full-history \ + --ancestry-path A..HEAD -- file +check_result 'R M' --topo-order \ + --simplify-merges \ + --ancestry-path A..HEAD -- file +check_result 'N R M' --topo-order \ + --simplify-merges --show-pulls \ + --ancestry-path A..HEAD -- file + +test_expect_success 'log --graph --simplify-merges --show-pulls' ' + cat >expect <<-\EOF && + * N + * R + |\ + | * X + * | M + |\ \ + | * | B + | |/ + * / A + |/ + * I + EOF + git log --graph --pretty="%s" \ + --simplify-merges --show-pulls \ + -- file >actual && + test_cmp expect actual +' + test_done diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index 34502e3a50..f822d5d328 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -129,12 +129,30 @@ test_expect_success 'rename tag A to Q locally' ' mv .git/refs/tags/A .git/refs/tags/Q ' cat - >err.expect <<EOF -warning: tag 'A' is really 'Q' here +warning: tag 'Q' is externally known as 'A' EOF check_describe A-* HEAD test_expect_success 'warning was displayed for Q' ' test_i18ncmp err.expect err.actual ' +test_expect_success 'misnamed annotated tag forces long output' ' + description=$(git describe --no-long Q^0) && + expr "$description" : "A-0-g[0-9a-f]*$" && + git rev-parse --verify "$description" >actual && + git rev-parse --verify Q^0 >expect && + test_cmp expect actual +' + +test_expect_success 'abbrev=0 will not break misplaced tag (1)' ' + description=$(git describe --abbrev=0 Q^0) && + expr "$description" : "A-0-g[0-9a-f]*$" +' + +test_expect_success 'abbrev=0 will not break misplaced tag (2)' ' + description=$(git describe --abbrev=0 c^0) && + expr "$description" : "A-1-g[0-9a-f]*$" +' + test_expect_success 'rename tag Q back to A' ' mv .git/refs/tags/Q .git/refs/tags/A ' diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 8a72b4c43a..b15582a7a2 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -6,6 +6,7 @@ test_description='fmt-merge-msg test' . ./test-lib.sh +. "$TEST_DIRECTORY/lib-gpg.sh" test_expect_success setup ' echo one >one && @@ -73,6 +74,10 @@ test_expect_success setup ' apos="'\''" ' +test_expect_success GPG 'set up a signed tag' ' + git tag -s -m signed-tag-msg signed-good-tag left +' + test_expect_success 'message for merging local branch' ' echo "Merge branch ${apos}left${apos}" >expected && @@ -83,6 +88,24 @@ test_expect_success 'message for merging local branch' ' test_cmp expected actual ' +test_expect_success GPG 'message for merging local tag signed by good key' ' + git checkout master && + git fetch . signed-good-tag && + git fmt-merge-msg <.git/FETCH_HEAD >actual 2>&1 && + grep "^Merge tag ${apos}signed-good-tag${apos}" actual && + grep "^# gpg: Signature made" actual && + grep "^# gpg: Good signature from" actual +' + +test_expect_success GPG 'message for merging local tag signed by unknown key' ' + git checkout master && + git fetch . signed-good-tag && + GNUPGHOME=. git fmt-merge-msg <.git/FETCH_HEAD >actual 2>&1 && + grep "^Merge tag ${apos}signed-good-tag${apos}" actual && + grep "^# gpg: Signature made" actual && + grep "^# gpg: Can${apos}t check signature: \(public key not found\|No public key\)" actual +' + test_expect_success 'message for merging external branch' ' echo "Merge branch ${apos}left${apos} of $(pwd)" >expected && diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 9c910ce746..b3c1092338 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -20,6 +20,10 @@ setdate_and_increment () { } test_expect_success setup ' + test_oid_cache <<-EOF && + disklen sha1:138 + disklen sha256:154 + EOF setdate_and_increment && echo "Using $datestamp" > one && git add one && @@ -50,6 +54,9 @@ test_atom() { " } +hexlen=$(test_oid hexsz) +disklen=$(test_oid disklen) + test_atom head refname refs/heads/master test_atom head refname: refs/heads/master test_atom head refname:short master @@ -82,9 +89,9 @@ test_atom head push:rstrip=-1 refs test_atom head push:strip=1 remotes/myfork/master test_atom head push:strip=-1 master test_atom head objecttype commit -test_atom head objectsize 171 -test_atom head objectsize:disk 138 -test_atom head deltabase 0000000000000000000000000000000000000000 +test_atom head objectsize $((131 + hexlen)) +test_atom head objectsize:disk $disklen +test_atom head deltabase $ZERO_OID test_atom head objectname $(git rev-parse refs/heads/master) test_atom head objectname:short $(git rev-parse --short refs/heads/master) test_atom head objectname:short=1 $(git rev-parse --short=1 refs/heads/master) @@ -125,11 +132,11 @@ test_atom tag refname:short testtag test_atom tag upstream '' test_atom tag push '' test_atom tag objecttype tag -test_atom tag objectsize 154 -test_atom tag objectsize:disk 138 -test_atom tag '*objectsize:disk' 138 -test_atom tag deltabase 0000000000000000000000000000000000000000 -test_atom tag '*deltabase' 0000000000000000000000000000000000000000 +test_atom tag objectsize $((114 + hexlen)) +test_atom tag objectsize:disk $disklen +test_atom tag '*objectsize:disk' $disklen +test_atom tag deltabase $ZERO_OID +test_atom tag '*deltabase' $ZERO_OID test_atom tag objectname $(git rev-parse refs/tags/testtag) test_atom tag objectname:short $(git rev-parse --short refs/tags/testtag) test_atom head objectname:short=1 $(git rev-parse --short=1 refs/heads/master) @@ -139,7 +146,7 @@ test_atom tag parent '' test_atom tag numparent '' test_atom tag object $(git rev-parse refs/tags/testtag^0) test_atom tag type 'commit' -test_atom tag '*objectname' 'ea122842f48be4afb2d1fc6a4b96c05885ab7463' +test_atom tag '*objectname' $(git rev-parse refs/tags/testtag^{}) test_atom tag '*objecttype' 'commit' test_atom tag author '' test_atom tag authorname '' @@ -643,7 +650,7 @@ test_atom refs/tags/signed-long contents "subject line body contents $sig" -cat >expected <<EOF +sort >expected <<EOF $(git rev-parse refs/tags/bogo) <committer@example.com> refs/tags/bogo $(git rev-parse refs/tags/master) <committer@example.com> refs/tags/master EOF diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 6db92bd3ba..74b637deb2 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1726,6 +1726,7 @@ test_expect_success 'recursive tagging should give advice' ' hint: already a tag. If you meant to tag the object that it points to, use: hint: | hint: git tag -f nested annotated-v4.0^{} + hint: Disable this message with "git config advice.nestedTag false" EOF git tag -m nested nested annotated-v4.0 2>actual && test_i18ncmp expect actual diff --git a/t/t7063-status-untracked-cache.sh b/t/t7063-status-untracked-cache.sh index 190ae149cf..6738497ea7 100755 --- a/t/t7063-status-untracked-cache.sh +++ b/t/t7063-status-untracked-cache.sh @@ -18,7 +18,7 @@ GIT_FORCE_UNTRACKED_CACHE=true export GIT_FORCE_UNTRACKED_CACHE sync_mtime () { - find . -type d -ls >/dev/null + find . -type d -exec ls -ld {} + >/dev/null } avoid_racy() { diff --git a/t/t7112-reset-submodule.sh b/t/t7112-reset-submodule.sh index a1cb9ff858..67346424a5 100755 --- a/t/t7112-reset-submodule.sh +++ b/t/t7112-reset-submodule.sh @@ -5,7 +5,6 @@ test_description='reset can handle submodules' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-submodule-update.sh -KNOWN_FAILURE_SUBMODULE_RECURSIVE_NESTED=1 KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS=1 KNOWN_FAILURE_SUBMODULE_OVERWRITE_IGNORED_UNTRACKED=1 diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index e3e2aab3b0..956e17abb3 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -938,7 +938,7 @@ test_expect_success 'submodule add --name allows to replace a submodule with ano echo "repo" >expect && test_must_fail git config -f .gitmodules submodule.repo.path && git config -f .gitmodules submodule.repo_new.path >actual && - test_cmp expect actual&& + test_cmp expect actual && echo "$submodurl/repo" >expect && test_must_fail git config -f .gitmodules submodule.repo.url && echo "$submodurl/bare.git" >expect && @@ -1010,7 +1010,7 @@ test_expect_success 'submodule add with an existing name fails unless forced' ' test -d repo && echo "repo" >expect && git config -f .gitmodules submodule.repo_new.path >actual && - test_cmp expect actual&& + test_cmp expect actual && echo "$submodurl/repo.git" >expect && git config -f .gitmodules submodule.repo_new.url >actual && test_cmp expect actual && diff --git a/t/t7416-submodule-dash-url.sh b/t/t7416-submodule-dash-url.sh index 5ba041f537..eec96e0ba9 100755 --- a/t/t7416-submodule-dash-url.sh +++ b/t/t7416-submodule-dash-url.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='check handling of .gitmodule url with dash' +test_description='check handling of disallowed .gitmodule urls' . ./test-lib.sh test_expect_success 'create submodule with protected dash in url' ' @@ -60,4 +60,145 @@ test_expect_success 'trailing backslash is handled correctly' ' test_i18ngrep ! "unknown option" err ' +test_expect_success 'fsck rejects missing URL scheme' ' + git checkout --orphan missing-scheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = http::one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules with missing URL scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects relative URL resolving to missing scheme' ' + git checkout --orphan relative-missing-scheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = "..\\../.\\../:one.example.com/foo.git" + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules with relative URL that strips off scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects empty URL scheme' ' + git checkout --orphan empty-scheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = http::://one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules with empty URL scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects relative URL resolving to empty scheme' ' + git checkout --orphan relative-empty-scheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = ../../../:://one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "relative gitmodules URL resolving to empty scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects empty hostname' ' + git checkout --orphan empty-host && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = http:///one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules with extra slashes" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects relative url that produced empty hostname' ' + git checkout --orphan messy-relative && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = ../../..//one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules abusing relative_path" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck permits embedded newline with unrecognized scheme' ' + git checkout --orphan newscheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = "data://acjbkd%0akajfdickajkd" + EOF + git add .gitmodules && + git commit -m "gitmodules with unrecognized scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + git push dst HEAD +' + +test_expect_success 'fsck rejects embedded newline in url' ' + # create an orphan branch to avoid existing .gitmodules objects + git checkout --orphan newline && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = "https://one.example.com?%0ahost=two.example.com/foo.git" + EOF + git add .gitmodules && + git commit -m "gitmodules with newline" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects embedded newline in relative url' ' + git checkout --orphan relative-newline && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = "./%0ahost=two.example.com/foo.git" + EOF + git add .gitmodules && + git commit -m "relative url with newline" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + test_done diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 0c06d22a00..6baaa1ad91 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -6,6 +6,11 @@ GNUPGHOME_NOT_USED=$GNUPGHOME . "$TEST_DIRECTORY/lib-gpg.sh" test_expect_success GPG 'create signed commits' ' + test_oid_cache <<-\EOF && + header sha1:gpgsig + header sha256:gpgsig-sha256 + EOF + test_when_finished "test_unconfig commit.gpgsign" && echo 1 >file && git add file && @@ -155,6 +160,11 @@ test_expect_success GPG 'verify signatures with --raw' ' ) ' +test_expect_success GPG 'proper header is used for hash algorithm' ' + git cat-file commit fourth-signed >output && + grep "^$(test_oid header) -----BEGIN PGP SIGNATURE-----" output +' + test_expect_success GPG 'show signed commit with signature' ' git show -s initial >commit && git show -s --show-signature initial >show && @@ -162,7 +172,7 @@ test_expect_success GPG 'show signed commit with signature' ' git cat-file commit initial >cat && grep -v -e "gpg: " -e "Warning: " show >show.commit && grep -e "gpg: " -e "Warning: " show >show.gpg && - grep -v "^ " cat | grep -v "^gpgsig " >cat.commit && + grep -v "^ " cat | grep -v "^$(test_oid header) " >cat.commit && test_cmp show.commit commit && test_cmp show.gpg verify.2 && test_cmp cat.commit verify.1 @@ -299,10 +309,10 @@ test_expect_success GPG 'check config gpg.format values' ' test_expect_success GPG 'detect fudged commit with double signature' ' sed -e "/gpgsig/,/END PGP/d" forged1 >double-base && sed -n -e "/gpgsig/,/END PGP/p" forged1 | \ - sed -e "s/^gpgsig//;s/^ //" | gpg --dearmor >double-sig1.sig && + sed -e "s/^$(test_oid header)//;s/^ //" | gpg --dearmor >double-sig1.sig && gpg -o double-sig2.sig -u 29472784 --detach-sign double-base && cat double-sig1.sig double-sig2.sig | gpg --enarmor >double-combined.asc && - sed -e "s/^\(-.*\)ARMORED FILE/\1SIGNATURE/;1s/^/gpgsig /;2,\$s/^/ /" \ + sed -e "s/^\(-.*\)ARMORED FILE/\1SIGNATURE/;1s/^/$(test_oid header) /;2,\$s/^/ /" \ double-combined.asc > double-gpgsig && sed -e "/committer/r double-gpgsig" double-base >double-commit && git hash-object -w -t commit double-commit >double-commit.commit && diff --git a/t/t7601-merge-pull-config.sh b/t/t7601-merge-pull-config.sh index c6c44ec570..0f97828cd0 100755 --- a/t/t7601-merge-pull-config.sh +++ b/t/t7601-merge-pull-config.sh @@ -27,6 +27,44 @@ test_expect_success 'setup' ' git tag c3 ' +test_expect_success 'pull.rebase not set' ' + git reset --hard c0 && + git pull . c1 2>err && + test_i18ngrep "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and pull.ff=false' ' + git reset --hard c0 && + test_config pull.ff false && + git pull . c1 2>err && + test_i18ngrep "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and pull.ff=only' ' + git reset --hard c0 && + test_config pull.ff only && + git pull . c1 2>err && + test_i18ngrep ! "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and --rebase given' ' + git reset --hard c0 && + git pull --rebase . c1 2>err && + test_i18ngrep ! "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and --no-rebase given' ' + git reset --hard c0 && + git pull --no-rebase . c1 2>err && + test_i18ngrep ! "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and --ff-only given' ' + git reset --hard c0 && + git pull --ff-only . c1 2>err && + test_i18ngrep ! "Pulling without specifying how to reconcile" err +' + test_expect_success 'merge c1 with c2' ' git reset --hard c1 && test -f c0.c && diff --git a/t/t7609-merge-co-error-msgs.sh b/t/t7609-merge-co-error-msgs.sh index e90413204e..5c8894d94f 100755 --- a/t/t7609-merge-co-error-msgs.sh +++ b/t/t7609-merge-co-error-msgs.sh @@ -126,7 +126,7 @@ test_expect_success 'not_uptodate_dir porcelain checkout error' ' git rm rep2 -r && >rep && >rep2 && - git add rep rep2&& + git add rep rep2 && git commit -m "added test as a file" && git checkout master && >rep/untracked-file && diff --git a/t/t9010-svn-fe.sh b/t/t9010-svn-fe.sh index c90fdc5c89..83f8f5cacb 100755 --- a/t/t9010-svn-fe.sh +++ b/t/t9010-svn-fe.sh @@ -486,7 +486,7 @@ test_expect_success 'NUL in property value' ' { properties \ unimportant "something with a NUL (Q)" \ - svn:log "commit message"&& + svn:log "commit message" && echo PROPS-END } | q_to_nul >props && diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 3e41c58a13..768257b29e 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -3381,4 +3381,113 @@ test_expect_success 'X: handling encoding' ' git log -1 --format=%B encoding | grep $(printf "\317\200") ' +### +### series Y (submodules and hash algorithms) +### + +cat >Y-sub-input <<\Y_INPUT_END +blob +mark :1 +data 4 +foo + +reset refs/heads/master +commit refs/heads/master +mark :2 +author Full Name <user@company.tld> 1000000000 +0100 +committer Full Name <user@company.tld> 1000000000 +0100 +data 24 +Test submodule commit 1 +M 100644 :1 file + +blob +mark :3 +data 8 +foo +bar + +commit refs/heads/master +mark :4 +author Full Name <user@company.tld> 1000000001 +0100 +committer Full Name <user@company.tld> 1000000001 +0100 +data 24 +Test submodule commit 2 +from :2 +M 100644 :3 file +Y_INPUT_END + +# Note that the submodule object IDs are intentionally not translated. +cat >Y-main-input <<\Y_INPUT_END +blob +mark :1 +data 4 +foo + +reset refs/heads/master +commit refs/heads/master +mark :2 +author Full Name <user@company.tld> 2000000000 +0100 +committer Full Name <user@company.tld> 2000000000 +0100 +data 14 +Test commit 1 +M 100644 :1 file + +blob +mark :3 +data 73 +[submodule "sub1"] + path = sub1 + url = https://void.example.com/main.git + +commit refs/heads/master +mark :4 +author Full Name <user@company.tld> 2000000001 +0100 +committer Full Name <user@company.tld> 2000000001 +0100 +data 14 +Test commit 2 +from :2 +M 100644 :3 .gitmodules +M 160000 0712c5be7cf681388e355ef47525aaf23aee1a6d sub1 + +blob +mark :5 +data 8 +foo +bar + +commit refs/heads/master +mark :6 +author Full Name <user@company.tld> 2000000002 +0100 +committer Full Name <user@company.tld> 2000000002 +0100 +data 14 +Test commit 3 +from :4 +M 100644 :5 file +M 160000 ff729f5e62f72c0c3978207d9a80e5f3a65f14d7 sub1 +Y_INPUT_END + +cat >Y-marks <<\Y_INPUT_END +:2 0712c5be7cf681388e355ef47525aaf23aee1a6d +:4 ff729f5e62f72c0c3978207d9a80e5f3a65f14d7 +Y_INPUT_END + +test_expect_success 'Y: setup' ' + test_oid_cache <<-EOF + Ymaster sha1:9afed2f9161ddf416c0a1863b8b0725b00070504 + Ymaster sha256:c0a1010da1df187b2e287654793df01b464bd6f8e3f17fc1481a7dadf84caee3 + EOF +' + +test_expect_success 'Y: rewrite submodules' ' + git init main1 && + ( + cd main1 && + git init sub2 && + git -C sub2 fast-import --export-marks=../sub2-marks <../Y-sub-input && + git fast-import --rewrite-submodules-from=sub:../Y-marks \ + --rewrite-submodules-to=sub:sub2-marks <../Y-main-input && + test "$(git rev-parse master)" = "$(test_oid Ymaster)" + ) +' + test_done diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index cc8d463e01..267ddc997d 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -53,7 +53,7 @@ test_expect_success \ test_expect_success \ 'Make initial commit' \ - 'echo "Not an empty file." > file && + 'echo "Not an empty file." >file && git add file && git commit -a -m "Initial commit." && git branch b' @@ -139,7 +139,7 @@ test_expect_success \ test_expect_success \ 'commitdiff(0): file added' \ - 'echo "New file" > new_file && + 'echo "New file" >new_file && git add new_file && git commit -a -m "File added." && gitweb_run "p=.git;a=commitdiff"' @@ -179,7 +179,7 @@ test_expect_success \ test_expect_success \ 'commitdiff(0): mode change and modified' \ - 'echo "New line" >> file2 && + 'echo "New line" >>file2 && test_chmod +x file2 && git commit -a -m "Mode change and modification." && gitweb_run "p=.git;a=commitdiff"' @@ -197,14 +197,14 @@ propter nomen suum. EOF git commit -a -m "File added." && git mv file2 file3 && - echo "Propter nomen suum." >> file3 && + echo "Propter nomen suum." >>file3 && git commit -a -m "File rename and modification." && gitweb_run "p=.git;a=commitdiff"' test_expect_success \ 'commitdiff(0): renamed, mode change and modified' \ 'git mv file3 file2 && - echo "Propter nomen suum." >> file2 && + echo "Propter nomen suum." >>file2 && test_chmod +x file2 && git commit -a -m "File rename, mode change and modification." && gitweb_run "p=.git;a=commitdiff"' @@ -213,8 +213,8 @@ test_expect_success \ # commitdiff testing (taken from t4114-apply-typechange.sh) test_expect_success 'setup typechange commits' ' - echo "hello world" > foo && - echo "hi planet" > bar && + echo "hello world" >foo && + echo "hi planet" >bar && git update-index --add foo bar && git commit -m initial && git branch initial && @@ -223,18 +223,18 @@ test_expect_success 'setup typechange commits' ' git commit -m "foo symlinked to bar" && git branch foo-symlinked-to-bar && rm -f foo && - echo "how far is the sun?" > foo && + echo "how far is the sun?" >foo && git update-index foo && git commit -m "foo back to file" && git branch foo-back-to-file && rm -f foo && git update-index --remove foo && mkdir foo && - echo "if only I knew" > foo/baz && + echo "if only I knew" >foo/baz && git update-index --add foo/baz && git commit -m "foo becomes a directory" && git branch "foo-becomes-a-directory" && - echo "hello world" > foo/baz && + echo "hello world" >foo/baz && git update-index foo/baz && git commit -m "foo/baz is the original foo" && git branch foo-baz-renamed-from-foo @@ -324,7 +324,7 @@ test_expect_success 'commitdiff(1): removal of incomplete line' ' test_expect_success \ 'Create a merge' \ 'git checkout b && - echo "Branch" >> b && + echo "Branch" >>b && git add b && git commit -a -m "On branch" && git checkout master && @@ -342,26 +342,26 @@ test_expect_success \ test_expect_success \ 'Prepare large commit' \ 'git checkout b && - echo "To be changed" > 01-change && - echo "To be renamed" > 02-pure-rename-from && - echo "To be deleted" > 03-delete && - echo "To be renamed and changed" > 04-rename-from && - echo "To have mode changed" > 05-mode-change && - echo "File to symlink" > 06-file-or-symlink && - echo "To be changed and have mode changed" > 07-change-mode-change && + echo "To be changed" >01-change && + echo "To be renamed" >02-pure-rename-from && + echo "To be deleted" >03-delete && + echo "To be renamed and changed" >04-rename-from && + echo "To have mode changed" >05-mode-change && + echo "File to symlink" >06-file-or-symlink && + echo "To be changed and have mode changed" >07-change-mode-change && git add 0* && git commit -a -m "Prepare large commit" && - echo "Changed" > 01-change && + echo "Changed" >01-change && git mv 02-pure-rename-from 02-pure-rename-to && git rm 03-delete && rm -f 03-delete && - echo "A new file" > 03-new && + echo "A new file" >03-new && git add 03-new && git mv 04-rename-from 04-rename-to && - echo "Changed" >> 04-rename-to && + echo "Changed" >>04-rename-to && test_chmod +x 05-mode-change && rm -f 06-file-or-symlink && test_ln_s_add 01-change 06-file-or-symlink && - echo "Changed and have mode changed" > 07-change-mode-change && + echo "Changed and have mode changed" >07-change-mode-change && test_chmod +x 07-change-mode-change && git commit -a -m "Large commit" && git checkout master' @@ -444,7 +444,7 @@ test_expect_success \ test_expect_success \ 'logs: history (implicit HEAD, deleted file)' \ 'git checkout master && - echo "to be deleted" > deleted_file && + echo "to be deleted" >deleted_file && git add deleted_file && git commit -m "Add file to be deleted" && git rm deleted_file && @@ -522,7 +522,7 @@ test_expect_success \ '. "$TEST_DIRECTORY"/t3901/utf8.txt && test_when_finished "GIT_AUTHOR_NAME=\"A U Thor\"" && test_when_finished "GIT_COMMITTER_NAME=\"C O Mitter\"" && - echo "UTF-8" >> file && + echo "UTF-8" >>file && git add file && git commit -F "$TEST_DIRECTORY"/t3900/1-UTF-8.txt && gitweb_run "p=.git;a=commit"' @@ -532,7 +532,7 @@ test_expect_success \ '. "$TEST_DIRECTORY"/t3901/8859-1.txt && test_when_finished "GIT_AUTHOR_NAME=\"A U Thor\"" && test_when_finished "GIT_COMMITTER_NAME=\"C O Mitter\"" && - echo "ISO-8859-1" >> file && + echo "ISO-8859-1" >>file && git add file && test_config i18n.commitencoding ISO-8859-1 && git commit -F "$TEST_DIRECTORY"/t3900/ISO8859-1.txt && @@ -675,8 +675,8 @@ test_expect_success \ test_expect_success \ 'README.html with non-ASCII characters (utf-8)' \ - 'echo "<b>UTF-8 example:</b><br />" > .git/README.html && - cat "$TEST_DIRECTORY"/t3900/1-UTF-8.txt >> .git/README.html && + 'echo "<b>UTF-8 example:</b><br />" >.git/README.html && + cat "$TEST_DIRECTORY"/t3900/1-UTF-8.txt >>.git/README.html && gitweb_run "p=.git;a=summary"' # ---------------------------------------------------------------------- @@ -704,7 +704,7 @@ test_expect_success HIGHLIGHT \ test_expect_success HIGHLIGHT \ 'syntax highlighting (highlighted, shell script)' \ 'git config gitweb.highlight yes && - echo "#!/usr/bin/sh" > test.sh && + echo "#!/usr/bin/sh" >test.sh && git add test.sh && git commit -m "Add test.sh" && gitweb_run "p=.git;a=blob;f=test.sh"' @@ -712,7 +712,7 @@ test_expect_success HIGHLIGHT \ test_expect_success HIGHLIGHT \ 'syntax highlighting (highlighter language autodetection)' \ 'git config gitweb.highlight yes && - echo "#!/usr/bin/perl" > test && + echo "#!/usr/bin/perl" >test && git add test && git commit -m "Add test" && gitweb_run "p=.git;a=blob;f=test"' @@ -729,11 +729,11 @@ test_expect_success \ 'git init --bare foo.git && git --git-dir=foo.git --work-tree=. add file && git --git-dir=foo.git --work-tree=. commit -m "Initial commit" && - echo "foo" > foo.git/description && + echo "foo" >foo.git/description && mkdir -p foo && (cd foo && git clone --shared --bare ../foo.git foo-forked.git && - echo "fork of foo" > foo-forked.git/description)' + echo "fork of foo" >foo-forked.git/description)' test_expect_success \ 'forks: projects list' \ @@ -754,8 +754,8 @@ EOF test_expect_success \ 'ctags: tag cloud in projects list' \ 'mkdir .git/ctags && - echo "2" > .git/ctags/foo && - echo "1" > .git/ctags/bar && + echo "2" >.git/ctags/foo && + echo "1" >.git/ctags/bar && gitweb_run' test_expect_success \ @@ -769,8 +769,8 @@ test_expect_success \ test_expect_success \ 'ctags: malformed tag weights' \ 'mkdir -p .git/ctags && - echo "not-a-number" > .git/ctags/nan && - echo "not-a-number-2" > .git/ctags/nan2 && + echo "not-a-number" >.git/ctags/nan && + echo "not-a-number-2" >.git/ctags/nan2 && echo "0.1" >.git/ctags/floating-point && gitweb_run' diff --git a/t/t9831-git-p4-triggers.sh b/t/t9831-git-p4-triggers.sh index d743ca33ee..ff6c0352e6 100755 --- a/t/t9831-git-p4-triggers.sh +++ b/t/t9831-git-p4-triggers.sh @@ -58,7 +58,7 @@ test_expect_success 'import with extra info lines from verbose p4 trigger' ' ( cd "$git" && git p4 sync - )&& + ) && ( p4 triggers -i <<-EOF Triggers: diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 352c213d52..3103be8a32 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -905,7 +905,7 @@ test_expect_code () { # - not all diff versions understand "-u" test_cmp() { - $GIT_TEST_CMP "$@" + eval "$GIT_TEST_CMP" '"$@"' } # Check that the given config key has the expected value. @@ -1362,14 +1362,22 @@ nongit () { ) } 7>&2 2>&4 -# convert stdin to pktline representation; note that empty input becomes an -# empty packet, not a flush packet (for that you can just print 0000 yourself). +# convert function arguments or stdin (if not arguments given) to pktline +# representation. If multiple arguments are given, they are separated by +# whitespace and put in a single packet. Note that data containing NULs must be +# given on stdin, and that empty input becomes an empty packet, not a flush +# packet (for that you can just print 0000 yourself). packetize() { - cat >packetize.tmp && - len=$(wc -c <packetize.tmp) && - printf '%04x%s' "$(($len + 4))" && - cat packetize.tmp && - rm -f packetize.tmp + if test $# -gt 0 + then + packet="$*" + printf '%04x%s' "$((4 + ${#packet}))" "$packet" + else + perl -e ' + my $packet = do { local $/; <STDIN> }; + printf "%04x%s", 4 + length($packet), $packet; + ' + fi } # Parse the input as a series of pktlines, writing the result to stdout. @@ -1543,3 +1551,13 @@ test_bitmap_traversal () { test_cmp "$1.normalized" "$2.normalized" && rm -f "$1.normalized" "$2.normalized" } + +# Tests for the hidden file attribute on Windows +test_path_is_hidden () { + test_have_prereq MINGW || + BUG "test_path_is_hidden can only be used on Windows" + + # Use the output of `attrib`, ignore the absolute path + case "$("$SYSTEMROOT"/system32/attrib "$1")" in *H*?:*) return 0;; esac + return 1 +} diff --git a/t/test-lib.sh b/t/test-lib.sh index 0ea1e5a05e..0bb1105ec3 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -78,20 +78,23 @@ then exit 1 fi -# Parse options while taking care to leave $@ intact, so we will still -# have all the original command line options when executing the test -# script again for '--tee' and '--verbose-log' below. store_arg_to= -prev_opt= -for opt -do - if test -n "$store_arg_to" +opt_required_arg= +# $1: option string +# $2: name of the var where the arg will be stored +mark_option_requires_arg () { + if test -n "$opt_required_arg" then - eval $store_arg_to=\$opt - store_arg_to= - prev_opt= - continue + echo "error: options that require args cannot be bundled" \ + "together: '$opt_required_arg' and '$1'" >&2 + exit 1 fi + opt_required_arg=$1 + store_arg_to=$2 +} + +parse_option () { + local opt="$1" case "$opt" in -d|--d|--de|--deb|--debu|--debug) @@ -101,7 +104,7 @@ do -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) GIT_TEST_LONG=t; export GIT_TEST_LONG ;; -r) - store_arg_to=run_list + mark_option_requires_arg "$opt" run_list ;; --run=*) run_list=${opt#--*=} ;; @@ -185,12 +188,42 @@ do *) echo "error: unknown test option '$opt'" >&2; exit 1 ;; esac +} - prev_opt=$opt +# Parse options while taking care to leave $@ intact, so we will still +# have all the original command line options when executing the test +# script again for '--tee' and '--verbose-log' later. +for opt +do + if test -n "$store_arg_to" + then + eval $store_arg_to=\$opt + store_arg_to= + opt_required_arg= + continue + fi + + case "$opt" in + --*|-?) + parse_option "$opt" ;; + -?*) + # bundled short options must be fed separately to parse_option + opt=${opt#-} + while test -n "$opt" + do + extra=${opt#?} + this=${opt%$extra} + opt=$extra + parse_option "-$this" + done + ;; + *) + echo "error: unknown test option '$opt'" >&2; exit 1 ;; + esac done if test -n "$store_arg_to" then - echo "error: $prev_opt requires an argument" >&2 + echo "error: $opt_required_arg requires an argument" >&2 exit 1 fi @@ -494,21 +527,6 @@ case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in ;; esac -# Convenience -# -# A regexp to match 5, 35 and 40 hexdigits -_x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' -_x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05" -_x40="$_x35$_x05" - -# Zero SHA-1 -_z40=0000000000000000000000000000000000000000 - -OID_REGEX="$_x40" -ZERO_OID=$_z40 -EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904 -EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 - # Line feed LF=' ' @@ -882,6 +900,7 @@ maybe_setup_valgrind () { fi } +trace_level_=0 want_trace () { test "$trace" = t && { test "$verbose" = t || test "$verbose_log" = t @@ -895,7 +914,7 @@ want_trace () { test_eval_inner_ () { # Do not add anything extra (including LF) after '$*' eval " - want_trace && set -x + want_trace && trace_level_=$(($trace_level_+1)) && set -x $*" } @@ -926,7 +945,8 @@ test_eval_ () { test_eval_ret_=$? if want_trace then - set +x + test 1 = $trace_level_ && set +x + trace_level_=$(($trace_level_-1)) fi } 2>/dev/null 4>&2 @@ -1085,6 +1105,7 @@ finalize_junit_xml () { junit_time=$(test-tool date getnanos $junit_suite_start) sed -e "s/\(<testsuite.*\) time=\"[^\"]*\"/\1/" \ -e "s/<testsuite [^>]*/& time=\"$junit_time\"/" \ + -e '/^ *<\/testsuite/d' \ <"$junit_xml_path" >"$junit_xml_path.new" mv "$junit_xml_path.new" "$junit_xml_path" @@ -1383,6 +1404,20 @@ then fi fi +# Convenience +# A regexp to match 5, 35 and 40 hexdigits +_x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' +_x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05" +_x40="$_x35$_x05" + +test_oid_init + +ZERO_OID=$(test_oid zero) +OID_REGEX=$(echo $ZERO_OID | sed -e 's/0/[0-9a-f]/g') +EMPTY_TREE=$(test_oid empty_tree) +EMPTY_BLOB=$(test_oid empty_blob) +_z40=$ZERO_OID + # Provide an implementation of the 'yes' utility; the upper bound # limit is there to help Windows that cannot stop this loop from # wasting cycles when the downstream stops reading, so do not be |