diff options
Diffstat (limited to 't')
28 files changed, 812 insertions, 185 deletions
diff --git a/t/Makefile b/t/Makefile index c7baefb7ea..73c6ec473d 100644 --- a/t/Makefile +++ b/t/Makefile @@ -11,16 +11,25 @@ SHELL_PATH ?= $(SHELL) PERL_PATH ?= /usr/bin/perl TAR ?= $(TAR) RM ?= rm -f +PROVE ?= prove +DEFAULT_TEST_TARGET ?= test # Shell quote; SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) T = $(wildcard t[0-9][0-9][0-9][0-9]-*.sh) TSVN = $(wildcard t91[0-9][0-9]-*.sh) +TGITWEB = $(wildcard t95[0-9][0-9]-*.sh) -all: pre-clean +all: $(DEFAULT_TEST_TARGET) + +test: pre-clean $(MAKE) aggregate-results-and-cleanup +prove: pre-clean + @echo "*** prove ***"; GIT_CONFIG=.git/config $(PROVE) --exec '$(SHELL_PATH_SQ)' $(GIT_PROVE_OPTS) $(T) :: $(GIT_TEST_OPTS) + $(MAKE) clean + $(T): @echo "*** $@ ***"; GIT_CONFIG=.git/config '$(SHELL_PATH_SQ)' $@ $(GIT_TEST_OPTS) @@ -46,6 +55,9 @@ full-svn-test: $(MAKE) $(TSVN) GIT_SVN_NO_OPTIMIZE_COMMITS=1 LC_ALL=C $(MAKE) $(TSVN) GIT_SVN_NO_OPTIMIZE_COMMITS=0 LC_ALL=en_US.UTF-8 +gitweb-test: + $(MAKE) $(TGITWEB) + valgrind: GIT_TEST_OPTS=--valgrind $(MAKE) @@ -50,6 +50,12 @@ prove and other harnesses come with a lot of useful options. The # Repeat until no more failures $ prove -j 15 --state=failed,save ./t[0-9]*.sh +You can give DEFAULT_TEST_TARGET=prove on the make command (or define it +in config.mak) to cause "make test" to run tests under prove. +GIT_PROVE_OPTS can be used to pass additional options, e.g. + + $ make DEFAULT_TEST_TARGET=prove GIT_PROVE_OPTS='--timer --jobs 16' test + You can also run each test individually from command line, like this: $ sh ./t3010-ls-files-killed-modified.sh diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh index 8c490c8707..b9bb95feaa 100644 --- a/t/gitweb-lib.sh +++ b/t/gitweb-lib.sh @@ -32,17 +32,34 @@ EOF cat >.git/description <<EOF $0 test repository EOF + + # You can set the GITWEB_TEST_INSTALLED environment variable to + # the gitwebdir (the directory where gitweb is installed / deployed to) + # of an existing gitweb instalation to test that installation, + # or simply to pathname of installed gitweb script. + if test -n "$GITWEB_TEST_INSTALLED" ; then + if test -d $GITWEB_TEST_INSTALLED; then + SCRIPT_NAME="$GITWEB_TEST_INSTALLED/gitweb.cgi" + else + SCRIPT_NAME="$GITWEB_TEST_INSTALLED" + fi + test -f "$SCRIPT_NAME" || + error "Cannot find gitweb at $GITWEB_TEST_INSTALLED." + say "# Testing $SCRIPT_NAME" + else # normal case, use source version of gitweb + SCRIPT_NAME="$GIT_BUILD_DIR/gitweb/gitweb.perl" + fi + export SCRIPT_NAME } gitweb_run () { GATEWAY_INTERFACE='CGI/1.1' HTTP_ACCEPT='*/*' REQUEST_METHOD='GET' - SCRIPT_NAME="$GIT_BUILD_DIR/gitweb/gitweb.perl" QUERY_STRING=""$1"" PATH_INFO=""$2"" export GATEWAY_INTERFACE HTTP_ACCEPT REQUEST_METHOD \ - SCRIPT_NAME QUERY_STRING PATH_INFO + QUERY_STRING PATH_INFO GITWEB_CONFIG=$(pwd)/gitweb_config.perl export GITWEB_CONFIG @@ -80,7 +97,7 @@ if ! test_have_prereq PERL; then test_done fi -perl -MEncode -e 'decode_utf8("", Encode::FB_CROAK)' >/dev/null 2>&1 || { +perl -MEncode -e '$e="";decode_utf8($e, Encode::FB_CROAK)' >/dev/null 2>&1 || { skip_all='skipping gitweb tests, perl version is too old' test_done } diff --git a/t/lib-terminal.sh b/t/lib-terminal.sh new file mode 100644 index 0000000000..c383b57ed9 --- /dev/null +++ b/t/lib-terminal.sh @@ -0,0 +1,19 @@ +#!/bin/sh + +test_expect_success 'set up terminal for tests' ' + if + test_have_prereq PERL && + "$PERL_PATH" "$TEST_DIRECTORY"/test-terminal.perl \ + sh -c "test -t 1 && test -t 2" + then + test_set_prereq TTY && + test_terminal () { + if ! test_declared_prereq TTY + then + echo >&4 "test_terminal: need to declare TTY prerequisite" + return 127 + fi + "$PERL_PATH" "$TEST_DIRECTORY"/test-terminal.perl "$@" + } + fi +' diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh index 25205ac0ee..e75153bdea 100755 --- a/t/t0003-attributes.sh +++ b/t/t0003-attributes.sh @@ -38,7 +38,7 @@ test_expect_success 'setup' ' ) >a/b/.gitattributes ( echo "global test=global" - ) >$HOME/global-gitattributes + ) >"$HOME"/global-gitattributes ' diff --git a/t/t1011-read-tree-sparse-checkout.sh b/t/t1011-read-tree-sparse-checkout.sh index 9a07de1a5b..8008fa2d89 100755 --- a/t/t1011-read-tree-sparse-checkout.sh +++ b/t/t1011-read-tree-sparse-checkout.sh @@ -17,17 +17,19 @@ test_expect_success 'setup' ' cat >expected <<-\EOF && 100644 77f0ba1734ed79d12881f81b36ee134de6a3327b 0 init.t 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 sub/added + 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 subsub/added EOF cat >expected.swt <<-\EOF && H init.t H sub/added + H subsub/added EOF test_commit init && echo modified >>init.t && - mkdir sub && - touch sub/added && - git add init.t sub/added && + mkdir sub subsub && + touch sub/added subsub/added && + git add init.t sub/added subsub/added && git commit -m "modified and added" && git tag top && git rm sub/added && @@ -81,6 +83,7 @@ test_expect_success 'match directories with trailing slash' ' cat >expected.swt-noinit <<-\EOF && S init.t H sub/added + S subsub/added EOF echo sub/ > .git/info/sparse-checkout && @@ -105,6 +108,7 @@ test_expect_success 'checkout area changes' ' cat >expected.swt-nosub <<-\EOF && H init.t S sub/added + S subsub/added EOF echo init.t >.git/info/sparse-checkout && diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index d0ab8ffe1b..d0e55465ff 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -289,6 +289,14 @@ test_expect_success 'working --list' \ 'git config --list > output && cmp output expect' cat > expect << EOF +EOF + +test_expect_success '--list without repo produces empty output' ' + git --git-dir=nonexistent config --list >output && + test_cmp expect output +' + +cat > expect << EOF beta.noindent sillyValue nextsection.nonewline wow2 for me EOF @@ -836,6 +844,27 @@ test_expect_success SYMLINKS 'symlinked configuration' ' ' +test_expect_success 'nonexistent configuration' ' + ( + GIT_CONFIG=doesnotexist && + export GIT_CONFIG && + test_must_fail git config --list && + test_must_fail git config test.xyzzy + ) +' + +test_expect_success SYMLINKS 'symlink to nonexistent configuration' ' + ln -s doesnotexist linktonada && + ln -s linktonada linktolinktonada && + ( + GIT_CONFIG=linktonada && + export GIT_CONFIG && + test_must_fail git config --list && + GIT_CONFIG=linktolinktonada && + test_must_fail git config --list + ) +' + test_expect_success 'check split_cmdline return' " git config alias.split-cmdline-fix 'echo \"' && test_must_fail git split-cmdline-fix && diff --git a/t/t3402-rebase-merge.sh b/t/t3402-rebase-merge.sh index 2bea65634a..be8c1d5ef9 100755 --- a/t/t3402-rebase-merge.sh +++ b/t/t3402-rebase-merge.sh @@ -117,4 +117,25 @@ test_expect_success 'picking rebase' ' esac ' +test_expect_success 'rebase -s funny -Xopt' ' + test_when_finished "rm -fr test-bin funny.was.run" && + mkdir test-bin && + cat >test-bin/git-merge-funny <<-EOF && + #!$SHELL_PATH + case "\$1" in --opt) ;; *) exit 2 ;; esac + shift && + >funny.was.run && + exec git merge-recursive "\$@" + EOF + chmod +x test-bin/git-merge-funny && + git reset --hard && + git checkout -b test-funny master^ && + test_commit funny && + ( + PATH=./test-bin:$PATH + git rebase -s funny -Xopt master + ) && + test -f funny.was.run +' + test_done diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh new file mode 100755 index 0000000000..1aee483510 --- /dev/null +++ b/t/t3419-rebase-patch-id.sh @@ -0,0 +1,109 @@ +#!/bin/bash + +test_description='git rebase - test patch id computation' + +. ./test-lib.sh + +test_set_prereq NOT_EXPENSIVE +test -n "$GIT_PATCHID_TIMING_TESTS" && test_set_prereq EXPENSIVE +test -x /usr/bin/time && test_set_prereq USR_BIN_TIME + +count() +{ + i=0 + while test $i -lt $1 + do + echo "$i" + i=$(($i+1)) + done +} + +scramble() +{ + i=0 + while read x + do + if test $i -ne 0 + then + echo "$x" + fi + i=$(((i+1) % 10)) + done < "$1" > "$1.new" + mv -f "$1.new" "$1" +} + +run() +{ + echo \$ "$@" + /usr/bin/time "$@" >/dev/null +} + +test_expect_success 'setup' ' + git commit --allow-empty -m initial + git tag root +' + +do_tests() +{ + pr=$1 + nlines=$2 + + test_expect_success $pr "setup: $nlines lines" " + rm -f .gitattributes && + git checkout -q -f master && + git reset --hard root && + count $nlines >file && + git add file && + git commit -q -m initial && + git branch -f other && + + scramble file && + git add file && + git commit -q -m 'change big file' && + + git checkout -q other && + : >newfile && + git add newfile && + git commit -q -m 'add small file' && + + git cherry-pick master >/dev/null 2>&1 + " + + test_debug " + run git diff master^\! + " + + test_expect_success $pr 'setup attributes' " + echo 'file binary' >.gitattributes + " + + test_debug " + run git format-patch --stdout master && + run git format-patch --stdout --ignore-if-in-upstream master + " + + test_expect_success $pr 'detect upstream patch' " + git checkout -q master && + scramble file && + git add file && + git commit -q -m 'change big file again' && + git checkout -q other^{} && + git rebase master && + test_must_fail test -n \"\$(git rev-list master...HEAD~)\" + " + + test_expect_success $pr 'do not drop patch' " + git branch -f squashed master && + git checkout -q -f squashed && + git reset -q --soft HEAD~2 && + git commit -q -m squashed && + git checkout -q other^{} && + test_must_fail git rebase squashed && + rm -rf .git/rebase-apply + " +} + +do_tests NOT_EXPENSIVE 500 +do_tests EXPENSIVE 50000 + +test_done diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index 6f6948925f..408a19c4c2 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -88,4 +88,30 @@ test_expect_success SYMLINKS \ test_must_fail git diff --no-index pinky brain > output 2> output.err && grep narf output && ! grep error output.err' + +test_expect_success SYMLINKS 'setup symlinks with attributes' ' + echo "*.bin diff=bin" >>.gitattributes && + echo content >file.bin && + ln -s file.bin link.bin && + git add -N file.bin link.bin +' + +cat >expect <<'EOF' +diff --git a/file.bin b/file.bin +index e69de29..d95f3ad 100644 +Binary files a/file.bin and b/file.bin differ +diff --git a/link.bin b/link.bin +index e69de29..dce41ec 120000 +--- a/link.bin ++++ b/link.bin +@@ -0,0 +1 @@ ++file.bin +\ No newline at end of file +EOF +test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' ' + git config diff.bin.binary true && + git diff file.bin link.bin >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh index bc46563afc..05ec062832 100755 --- a/t/t4012-diff-binary.sh +++ b/t/t4012-diff-binary.sh @@ -77,10 +77,6 @@ test_expect_success 'apply binary patch' \ tree1=`git write-tree` && test "$tree1" = "$tree0"' -nul_to_q() { - perl -pe 'y/\000/Q/' -} - test_expect_success 'diff --no-index with binary creation' ' echo Q | q_to_nul >binary && (: hide error code from diff, which just indicates differences diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index 935d101fe8..a8736f7cbe 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -491,4 +491,41 @@ test_expect_success 'combined diff with autocrlf conversion' ' ' +# Start testing the colored format for whitespace checks + +test_expect_success 'setup diff colors' ' + git config color.diff always && + git config color.diff.plain normal && + git config color.diff.meta bold && + git config color.diff.frag cyan && + git config color.diff.func normal && + git config color.diff.old red && + git config color.diff.new green && + git config color.diff.commit yellow && + git config color.diff.whitespace "normal red" && + + git config core.autocrlf false +' +cat >expected <<\EOF +<BOLD>diff --git a/x b/x<RESET> +<BOLD>index 9daeafb..2874b91 100644<RESET> +<BOLD>--- a/x<RESET> +<BOLD>+++ b/x<RESET> +<CYAN>@@ -1 +1,4 @@<RESET> + test<RESET> +<GREEN>+<RESET><GREEN>{<RESET> +<GREEN>+<RESET><BRED> <RESET> +<GREEN>+<RESET><GREEN>}<RESET> +EOF + +test_expect_success 'diff that introduces a line with only tabs' ' + git config core.whitespace blank-at-eol && + git reset --hard && + echo "test" > x && + git commit -m "initial" x && + echo "{NTN}" | tr "NT" "\n\t" >> x && + git -c color.diff=always diff | test_decode_color >current && + test_cmp expected current +' + test_done diff --git a/t/t4034-diff-words.sh b/t/t4034-diff-words.sh index 6f7548c3a1..3f3c7577ca 100755 --- a/t/t4034-diff-words.sh +++ b/t/t4034-diff-words.sh @@ -35,10 +35,10 @@ aeff = aeff * ( aaa ) EOF cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> <RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> @@ -122,10 +122,10 @@ test_expect_success '--word-diff=plain --no-color' ' ' cat > expect <<EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> <RED>[-h(4)-]<RESET><GREEN>{+h(4),hh[44]+}<RESET> @@ -143,10 +143,10 @@ test_expect_success '--word-diff=plain --color' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> <RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> <CYAN>@@ -3,0 +4,4 @@<RESET> <RESET><MAGENTA>a = b + c<RESET> @@ -163,10 +163,10 @@ test_expect_success 'word diff without context' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4),<GREEN>hh<RESET>[44] @@ -199,10 +199,10 @@ test_expect_success 'option overrides .gitattributes' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4)<GREEN>,hh[44]<RESET> @@ -231,10 +231,10 @@ test_expect_success 'command-line overrides config' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4),<GREEN>{+hh+}<RESET>[44] @@ -260,10 +260,10 @@ test_expect_success 'remove diff driver regex' ' ' cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 330b04f..5ed8eff 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 330b04f..5ed8eff 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> h(4),<GREEN>hh[44<RESET>] @@ -282,10 +282,10 @@ echo 'aaa (aaa)' > pre echo 'aaa (aaa) aaa' > post cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index c29453b..be22f37 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index c29453b..be22f37 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> aaa (aaa) <GREEN>aaa<RESET> EOF @@ -301,10 +301,10 @@ echo '(:' > pre echo '(' > post cat > expect <<\EOF -<WHITE>diff --git a/pre b/post<RESET> -<WHITE>index 289cb9d..2d06f37 100644<RESET> -<WHITE>--- a/pre<RESET> -<WHITE>+++ b/post<RESET> +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 289cb9d..2d06f37 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> (<RED>:<RESET> EOF diff --git a/t/t4041-diff-submodule-option.sh b/t/t4041-diff-submodule-option.sh index 995bdfafec..bf9a7526bd 100755 --- a/t/t4041-diff-submodule-option.sh +++ b/t/t4041-diff-submodule-option.sh @@ -37,9 +37,10 @@ head1=$(add_file sm1 foo1 foo2) test_expect_success 'added submodule' " git add sm1 && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 0000000...$head1 (new submodule) EOF + test_cmp expected actual " commit_file sm1 && @@ -47,33 +48,36 @@ head2=$(add_file sm1 foo3) test_expect_success 'modified submodule(forward)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head1..$head2: > Add foo3 EOF + test_cmp expected actual " test_expect_success 'modified submodule(forward)' " git diff --submodule=log >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head1..$head2: > Add foo3 EOF + test_cmp expected actual " test_expect_success 'modified submodule(forward) --submodule' " git diff --submodule >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head1..$head2: > Add foo3 EOF + test_cmp expected actual " fullhead1=$(cd sm1; git rev-list --max-count=1 $head1) fullhead2=$(cd sm1; git rev-list --max-count=1 $head2) test_expect_success 'modified submodule(forward) --submodule=short' " git diff --submodule=short >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 index $head1..$head2 160000 --- a/sm1 @@ -82,6 +86,7 @@ index $head1..$head2 160000 -Subproject commit $fullhead1 +Subproject commit $fullhead2 EOF + test_cmp expected actual " commit_file sm1 && @@ -93,24 +98,26 @@ head3=$( test_expect_success 'modified submodule(backward)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head2..$head3 (rewind): < Add foo3 < Add foo2 EOF + test_cmp expected actual " head4=$(add_file sm1 foo4 foo5) && head4_full=$(GIT_DIR=sm1/.git git rev-parse --verify HEAD) test_expect_success 'modified submodule(backward and forward)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head2...$head4: > Add foo5 > Add foo4 < Add foo3 < Add foo2 EOF + test_cmp expected actual " commit_file sm1 && @@ -123,7 +130,7 @@ mv sm1-bak sm1 test_expect_success 'typechanged submodule(submodule->blob), --cached' " git diff --submodule=log --cached >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 41fbea9...0000000 (submodule deleted) diff --git a/sm1 b/sm1 new file mode 100644 @@ -133,11 +140,12 @@ index 0000000..9da5fb8 @@ -0,0 +1 @@ +sm1 EOF + test_cmp expected actual " test_expect_success 'typechanged submodule(submodule->blob)' " git diff --submodule=log >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 deleted file mode 100644 index 9da5fb8..0000000 @@ -147,13 +155,14 @@ index 9da5fb8..0000000 -sm1 Submodule sm1 0000000...$head4 (new submodule) EOF + test_cmp expected actual " rm -rf sm1 && git checkout-index sm1 test_expect_success 'typechanged submodule(submodule->blob)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head4...0000000 (submodule deleted) diff --git a/sm1 b/sm1 new file mode 100644 @@ -163,6 +172,7 @@ index 0000000..$head5 @@ -0,0 +1 @@ +sm1 EOF + test_cmp expected actual " rm -f sm1 && @@ -171,15 +181,16 @@ head6=$(add_file sm1 foo6 foo7) fullhead6=$(cd sm1; git rev-list --max-count=1 $head6) test_expect_success 'nonexistent commit' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head4...$head6 (commits not present) EOF + test_cmp expected actual " commit_file test_expect_success 'typechanged submodule(blob->submodule)' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 deleted file mode 100644 index $head5..0000000 @@ -189,21 +200,24 @@ index $head5..0000000 -sm1 Submodule sm1 0000000...$head6 (new submodule) EOF + test_cmp expected actual " commit_file sm1 && test_expect_success 'submodule is up to date' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked content' " echo new > sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked content (untracked ignored)' " @@ -224,18 +238,20 @@ test_expect_success 'submodule contains untracked content (all ignored)' " test_expect_success 'submodule contains untracked and modifed content' " echo new > sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 contains modified content EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked and modifed content (untracked ignored)' " echo new > sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content EOF + test_cmp expected actual " test_expect_success 'submodule contains untracked and modifed content (dirty ignored)' " @@ -253,45 +269,50 @@ test_expect_success 'submodule contains untracked and modifed content (all ignor test_expect_success 'submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content EOF + test_cmp expected actual " (cd sm1; git commit -mchange foo6 >/dev/null) && head8=$(cd sm1; git rev-parse --verify HEAD | cut -c1-7) && test_expect_success 'submodule is modified' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content' " echo new > sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content (untracked ignored)' " git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content (dirty ignored)' " git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked content (all ignored)' " @@ -302,31 +323,34 @@ test_expect_success 'modified submodule contains untracked content (all ignored) test_expect_success 'modified submodule contains untracked and modifed content' " echo modification >> sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 contains modified content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked and modifed content (untracked ignored)' " echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked and modifed content (dirty ignored)' " echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " test_expect_success 'modified submodule contains untracked and modifed content (all ignored)' " @@ -338,19 +362,21 @@ test_expect_success 'modified submodule contains untracked and modifed content ( test_expect_success 'modified submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 contains modified content Submodule sm1 $head6..$head8: > change EOF + test_cmp expected actual " rm -rf sm1 test_expect_success 'deleted submodule' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) EOF + test_cmp expected actual " test_create_repo sm2 && @@ -359,41 +385,45 @@ git add sm2 test_expect_success 'multiple submodules' " git diff-index -p --submodule=log HEAD >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " test_expect_success 'path filter' " git diff-index -p --submodule=log HEAD sm2 >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " commit_file sm2 test_expect_success 'given commit' " git diff-index -p --submodule=log HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " test_expect_success 'given commit --submodule' " git diff-index -p --submodule HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual " fullhead7=$(cd sm2; git rev-list --max-count=1 $head7) test_expect_success 'given commit --submodule=short' " git diff-index -p --submodule=short HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && diff --git a/sm1 b/sm1 deleted file mode 160000 index $head6..0000000 @@ -409,6 +439,7 @@ index 0000000..$head7 @@ -0,0 +1 @@ +Subproject commit $fullhead7 EOF + test_cmp expected actual " test_expect_success 'setup .git file for sm2' ' @@ -420,10 +451,11 @@ test_expect_success 'setup .git file for sm2' ' test_expect_success 'diff --submodule with .git file' ' git diff --submodule HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && Submodule sm1 $head6...0000000 (submodule deleted) Submodule sm2 0000000...$head7 (new submodule) EOF + test_cmp expected actual ' test_done diff --git a/t/t4103-apply-binary.sh b/t/t4103-apply-binary.sh index 9692f16f35..08ad6d8b9e 100755 --- a/t/t4103-apply-binary.sh +++ b/t/t4103-apply-binary.sh @@ -37,7 +37,16 @@ test_expect_success 'setup' " git diff-tree -p -C master binary >C.diff && git diff-tree -p --binary master binary >BF.diff && - git diff-tree -p --binary -C master binary >CF.diff + git diff-tree -p --binary -C master binary >CF.diff && + + git diff-tree -p --full-index master binary >B-index.diff && + git diff-tree -p -C --full-index master binary >C-index.diff && + + git init other-repo && + (cd other-repo && + git fetch .. master && + git reset --hard FETCH_HEAD + ) " test_expect_success 'stat binary diff -- should not fail.' \ @@ -100,6 +109,22 @@ test_expect_success 'apply binary diff (copy) -- should fail.' \ 'do_reset && test_must_fail git apply --index C.diff' +test_expect_success 'apply binary diff with full-index' ' + do_reset && + git apply B-index.diff +' + +test_expect_success 'apply binary diff with full-index (copy)' ' + do_reset && + git apply C-index.diff +' + +test_expect_success 'apply full-index binary diff in new repo' ' + (cd other-repo && + do_reset && + test_must_fail git apply ../B-index.diff) +' + test_expect_success 'apply binary diff without replacement.' \ 'do_reset && git apply BF.diff' diff --git a/t/t4203-mailmap.sh b/t/t4203-mailmap.sh index 9a7d1b4466..e818de6ddd 100755 --- a/t/t4203-mailmap.sh +++ b/t/t4203-mailmap.sh @@ -4,6 +4,14 @@ test_description='.mailmap configurations' . ./test-lib.sh +fuzz_blame () { + sed " + s/$_x05[0-9a-f][0-9a-f][0-9a-f]/OBJID/g + s/$_x05[0-9a-f][0-9a-f]/OBJI/g + s/[-0-9]\{10\} [:0-9]\{8\} [-+][0-9]\{4\}/DATE/g + " "$@" +} + test_expect_success setup ' echo one >one && git add one && @@ -11,6 +19,7 @@ test_expect_success setup ' git commit -m initial && echo two >>one && git add one && + test_tick && git commit --author "nick1 <bugs@company.xx>" -m second ' @@ -54,7 +63,7 @@ Repo Guy (1): EOF test_expect_success 'mailmap.file set' ' - mkdir internal_mailmap && + mkdir -p internal_mailmap && echo "Internal Guy <bugs@company.xx>" > internal_mailmap/.mailmap && git config mailmap.file internal_mailmap/.mailmap && git shortlog HEAD >actual && @@ -93,6 +102,40 @@ test_expect_success 'mailmap.file non-existant' ' ' cat >expect <<\EOF +Internal Guy (1): + second + +Repo Guy (1): + initial + +EOF + +test_expect_success 'name entry after email entry' ' + mkdir -p internal_mailmap && + echo "<bugs@company.xy> <bugs@company.xx>" >internal_mailmap/.mailmap && + echo "Internal Guy <bugs@company.xx>" >>internal_mailmap/.mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF +Internal Guy (1): + second + +Repo Guy (1): + initial + +EOF + +test_expect_success 'name entry after email entry, case-insensitive' ' + mkdir -p internal_mailmap && + echo "<bugs@company.xy> <bugs@company.xx>" >internal_mailmap/.mailmap && + echo "Internal Guy <BUGS@Company.xx>" >>internal_mailmap/.mailmap && + git shortlog HEAD >actual && + test_cmp expect actual +' + +cat >expect <<\EOF A U Thor (1): initial @@ -101,7 +144,7 @@ nick1 (1): EOF test_expect_success 'No mailmap files, but configured' ' - rm .mailmap && + rm -f .mailmap internal_mailmap/.mailmap && git shortlog HEAD >actual && test_cmp expect actual ' @@ -153,7 +196,7 @@ test_expect_success 'Shortlog output (complex mapping)' ' test_tick && git commit --author "CTO <cto@coompany.xx>" -m seventh && - mkdir internal_mailmap && + mkdir -p internal_mailmap && echo "Committed <committer@example.com>" > internal_mailmap/.mailmap && echo "<cto@company.xx> <cto@coompany.xx>" >> internal_mailmap/.mailmap && echo "Some Dude <some@dude.xx> nick1 <bugs@company.xx>" >> internal_mailmap/.mailmap && @@ -198,18 +241,18 @@ test_expect_success 'Log output (complex mapping)' ' # git blame cat >expect <<\EOF -^3a2fdcb (A U Thor 2005-04-07 15:13:13 -0700 1) one -7de6f99b (Some Dude 2005-04-07 15:13:13 -0700 2) two -5815879d (Other Author 2005-04-07 15:14:13 -0700 3) three -ff859d96 (Other Author 2005-04-07 15:15:13 -0700 4) four -5ab6d4fa (Santa Claus 2005-04-07 15:16:13 -0700 5) five -38a42d8b (Santa Claus 2005-04-07 15:17:13 -0700 6) six -8ddc0386 (CTO 2005-04-07 15:18:13 -0700 7) seven +^OBJI (A U Thor DATE 1) one +OBJID (Some Dude DATE 2) two +OBJID (Other Author DATE 3) three +OBJID (Other Author DATE 4) four +OBJID (Santa Claus DATE 5) five +OBJID (Santa Claus DATE 6) six +OBJID (CTO DATE 7) seven EOF - test_expect_success 'Blame output (complex mapping)' ' git blame one >actual && - test_cmp expect actual + fuzz_blame actual >actual.fuzz && + test_cmp expect actual.fuzz ' test_done diff --git a/t/t5523-push-upstream.sh b/t/t5523-push-upstream.sh index 00da70763b..c229fe68f1 100755 --- a/t/t5523-push-upstream.sh +++ b/t/t5523-push-upstream.sh @@ -2,9 +2,14 @@ test_description='push with --set-upstream' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-terminal.sh + +ensure_fresh_upstream() { + rm -rf parent && git init --bare parent +} test_expect_success 'setup bare parent' ' - git init --bare parent && + ensure_fresh_upstream && git remote add upstream parent ' @@ -66,4 +71,41 @@ test_expect_success 'push -u HEAD' ' check_config headbranch upstream refs/heads/headbranch ' +test_expect_success TTY 'progress messages go to tty' ' + ensure_fresh_upstream && + + test_terminal git push -u upstream master >out 2>err && + grep "Writing objects" err +' + +test_expect_success 'progress messages do not go to non-tty' ' + ensure_fresh_upstream && + + # skip progress messages, since stderr is non-tty + git push -u upstream master >out 2>err && + ! grep "Writing objects" err +' + +test_expect_success 'progress messages go to non-tty (forced)' ' + ensure_fresh_upstream && + + # force progress messages to stderr, even though it is non-tty + git push -u --progress upstream master >out 2>err && + grep "Writing objects" err +' + +test_expect_success TTY 'push -q suppresses progress' ' + ensure_fresh_upstream && + + test_terminal git push -u -q upstream master >out 2>err && + ! grep "Writing objects" err +' + +test_expect_failure TTY 'push --no-progress suppresses progress' ' + ensure_fresh_upstream && + + test_terminal git push -u --no-progress upstream master >out 2>err && + ! grep "Writing objects" err +' + test_done diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index cccacd4add..d918cc02d0 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -162,6 +162,14 @@ commit 131a310eb913d107dd3c09a65d1651175898735d commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873 EOF +test_expect_success '%x00 shows NUL' ' + echo >expect commit f58db70b055c5718631e5c61528b28b12090cdea && + echo >>expect fooQbar && + git rev-list -1 --format=foo%x00bar HEAD >actual.nul && + nul_to_q <actual.nul >actual && + test_cmp expect actual +' + test_expect_success '%ad respects --date=' ' echo 2005-04-07 >expect.ad-short && git log -1 --date=short --pretty=tformat:%ad >output.ad-short master && diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index d486d73994..d9f343942c 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -64,6 +64,14 @@ cp new1.txt test.txt test_expect_success "merge without conflict" \ "git merge-file test.txt orig.txt new2.txt" +test_expect_success 'works in subdirectory' ' + mkdir dir && + cp new1.txt dir/a.txt && + cp orig.txt dir/o.txt && + cp new2.txt dir/b.txt && + ( cd dir && git merge-file a.txt o.txt b.txt ) +' + cp new1.txt test.txt test_expect_success "merge without conflict (--quiet)" \ "git merge-file --quiet test.txt orig.txt new2.txt" diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index ac943f5eee..700b556fe8 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1051,13 +1051,23 @@ test_expect_success \ test_expect_success \ 'message in editor has initial comment' ' - GIT_EDITOR=cat git tag -a initial-comment > actual + ! (GIT_EDITOR=cat git tag -a initial-comment > actual) +' + +test_expect_success \ + 'message in editor has initial comment: first line' ' # check the first line --- should be empty - first=$(sed -e 1q <actual) && - test -z "$first" && + echo >first.expect && + sed -e 1q <actual >first.actual && + test_cmp first.expect first.actual +' + +test_expect_success \ + 'message in editor has initial comment: remainder' ' # remove commented lines from the remainder -- should be empty - rest=$(sed -e 1d -e '/^#/d' <actual) && - test -z "$rest" + >rest.expect + sed -e 1d -e '/^#/d' <actual >rest.actual && + test_cmp rest.expect rest.actual ' get_tag_header reuse $commit commit $time >expect diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index fb744e3c4a..5641b59559 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -4,42 +4,13 @@ test_description='Test automatic use of a pager.' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-pager.sh +. "$TEST_DIRECTORY"/lib-terminal.sh cleanup_fail() { echo >&2 cleanup failed (exit 1) } -test_expect_success 'set up terminal for tests' ' - rm -f stdout_is_tty || - cleanup_fail && - - if test -t 1 - then - >stdout_is_tty - elif - test_have_prereq PERL && - "$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl \ - sh -c "test -t 1" - then - >test_terminal_works - fi -' - -if test -e stdout_is_tty -then - test_terminal() { "$@"; } - test_set_prereq TTY -elif test -e test_terminal_works -then - test_terminal() { - "$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl "$@" - } - test_set_prereq TTY -else - say "# no usable terminal, so skipping some tests" -fi - test_expect_success 'setup' ' unset GIT_PAGER GIT_PAGER_IN_USE; test_might_fail git config --unset core.pager && @@ -213,11 +184,6 @@ test_expect_success 'color when writing to a file intended for a pager' ' colorful colorful.log ' -if test_have_prereq SIMPLEPAGER && test_have_prereq TTY -then - test_set_prereq SIMPLEPAGERTTY -fi - # Use this helper to make it easy for the caller of your # terminal-using function to specify whether it should fail. # If you write @@ -253,7 +219,7 @@ parse_args() { test_default_pager() { parse_args "$@" - $test_expectation SIMPLEPAGERTTY "$cmd - default pager is used by default" " + $test_expectation SIMPLEPAGER,TTY "$cmd - default pager is used by default" " unset PAGER GIT_PAGER; test_might_fail git config --unset core.pager && rm -f default_pager_used || diff --git a/t/t7401-submodule-summary.sh b/t/t7401-submodule-summary.sh index 294584452b..7d7fde057b 100755 --- a/t/t7401-submodule-summary.sh +++ b/t/t7401-submodule-summary.sh @@ -37,11 +37,12 @@ head1=$(add_file sm1 foo1 foo2) test_expect_success 'added submodule' " git add sm1 && git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 0000000...$head1 (2): > Add foo2 EOF + test_cmp expected actual " commit_file sm1 && @@ -49,20 +50,22 @@ head2=$(add_file sm1 foo3) test_expect_success 'modified submodule(forward)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head1...$head2 (1): > Add foo3 EOF + test_cmp expected actual " test_expect_success 'modified submodule(forward), --files' " git submodule summary --files >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head1...$head2 (1): > Add foo3 EOF + test_cmp expected actual " commit_file sm1 && @@ -74,19 +77,20 @@ head3=$( test_expect_success 'modified submodule(backward)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head2...$head3 (2): < Add foo3 < Add foo2 EOF + test_cmp expected actual " head4=$(add_file sm1 foo4 foo5) && head4_full=$(GIT_DIR=sm1/.git git rev-parse --verify HEAD) test_expect_success 'modified submodule(backward and forward)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head2...$head4 (4): > Add foo5 > Add foo4 @@ -94,17 +98,19 @@ test_expect_success 'modified submodule(backward and forward)' " < Add foo2 EOF + test_cmp expected actual " test_expect_success '--summary-limit' " git submodule summary -n 3 >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head2...$head4 (4): > Add foo5 > Add foo4 < Add foo3 EOF + test_cmp expected actual " commit_file sm1 && @@ -117,30 +123,33 @@ mv sm1-bak sm1 test_expect_success 'typechanged submodule(submodule->blob), --cached' " git submodule summary --cached >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head4(submodule)->$head5(blob) (3): < Add foo5 EOF + test_cmp actual expected " test_expect_success 'typechanged submodule(submodule->blob), --files' " git submodule summary --files >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head5(blob)->$head4(submodule) (3): > Add foo5 EOF + test_cmp actual expected " rm -rf sm1 && git checkout-index sm1 test_expect_success 'typechanged submodule(submodule->blob)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head4(submodule)->$head5(blob): EOF + test_cmp actual expected " rm -f sm1 && @@ -148,31 +157,34 @@ test_create_repo sm1 && head6=$(add_file sm1 foo6 foo7) test_expect_success 'nonexistent commit' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head4...$head6: Warn: sm1 doesn't contain commit $head4_full EOF + test_cmp actual expected " commit_file test_expect_success 'typechanged submodule(blob->submodule)' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head5(blob)->$head6(submodule) (2): > Add foo7 EOF + test_cmp expected actual " commit_file sm1 && rm -rf sm1 test_expect_success 'deleted submodule' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head6...0000000: EOF + test_cmp expected actual " test_create_repo sm2 && @@ -181,34 +193,37 @@ git add sm2 test_expect_success 'multiple submodules' " git submodule summary >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head6...0000000: * sm2 0000000...$head7 (2): > Add foo9 EOF + test_cmp expected actual " test_expect_success 'path filter' " git submodule summary sm2 >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm2 0000000...$head7 (2): > Add foo9 EOF + test_cmp expected actual " commit_file sm2 test_expect_success 'given commit' " git submodule summary HEAD^ >actual && - diff actual - <<-EOF + cat >expected <<-EOF && * sm1 $head6...0000000: * sm2 0000000...$head7 (2): > Add foo9 EOF + test_cmp expected actual " test_expect_success '--for-status' " diff --git a/t/t7403-submodule-sync.sh b/t/t7403-submodule-sync.sh index 02522f9627..e5b19538b0 100755 --- a/t/t7403-submodule-sync.sh +++ b/t/t7403-submodule-sync.sh @@ -23,7 +23,9 @@ test_expect_success setup ' git commit -m "submodule" ) && git clone super super-clone && - (cd super-clone && git submodule update --init) + (cd super-clone && git submodule update --init) && + git clone super empty-clone && + (cd empty-clone && git submodule init) ' test_expect_success 'change submodule' ' @@ -64,4 +66,12 @@ test_expect_success '"git submodule sync" should update submodule URLs' ' ) ' +test_expect_success '"git submodule sync" should update submodule URLs if not yet cloned' ' + (cd empty-clone && + git pull && + git submodule sync && + test -d "$(git config submodule.submodule.url)" + ) +' + test_done diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh index 905a8baae9..d8ad25036f 100755 --- a/t/t7407-submodule-foreach.sh +++ b/t/t7407-submodule-foreach.sh @@ -226,6 +226,21 @@ test_expect_success 'test "status --recursive"' ' test_cmp expect actual ' +sed -e "/nested1 /s/.*/+$nested1sha1 nested1 (file2~1)/;/sub[1-3]/d" < expect > expect2 +mv -f expect2 expect + +test_expect_success 'ensure "status --cached --recursive" preserves the --cached flag' ' + ( + cd clone3 && + ( + cd nested1 && + test_commit file2 + ) && + git submodule status --cached --recursive -- nested1 > ../actual + ) && + test_cmp expect actual +' + test_expect_success 'use "git clone --recursive" to checkout all submodules' ' git clone --recursive super clone4 && test -d clone4/.git && @@ -238,4 +253,39 @@ test_expect_success 'use "git clone --recursive" to checkout all submodules' ' test -d clone4/nested1/nested2/nested3/submodule/.git ' +test_expect_success 'test "update --recursive" with a flag with spaces' ' + git clone super "common objects" && + git clone super clone5 && + ( + cd clone5 && + test ! -d nested1/.git && + git submodule update --init --recursive --reference="$(dirname "$PWD")/common objects" && + test -d nested1/.git && + test -d nested1/nested2/.git && + test -d nested1/nested2/nested3/.git && + test -f nested1/.git/objects/info/alternates && + test -f nested1/nested2/.git/objects/info/alternates && + test -f nested1/nested2/nested3/.git/objects/info/alternates + ) +' + +test_expect_success 'use "update --recursive nested1" to checkout all submodules rooted in nested1' ' + git clone super clone6 && + ( + cd clone6 && + test ! -d sub1/.git && + test ! -d sub2/.git && + test ! -d sub3/.git && + test ! -d nested1/.git && + git submodule update --init --recursive -- nested1 && + test ! -d sub1/.git && + test ! -d sub2/.git && + test ! -d sub3/.git && + test -d nested1/.git && + test -d nested1/nested2/.git && + test -d nested1/nested2/nested3/.git && + test -d nested1/nested2/nested3/submodule/.git + ) +' + test_done diff --git a/t/t8006-blame-textconv.sh b/t/t8006-blame-textconv.sh index 9ad96d4d32..dbf623bce5 100755 --- a/t/t8006-blame-textconv.sh +++ b/t/t8006-blame-textconv.sh @@ -9,22 +9,29 @@ find_blame() { cat >helper <<'EOF' #!/bin/sh -sed 's/^/converted: /' "$@" +grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; } +sed 's/^bin: /converted: /' "$1" EOF chmod +x helper test_expect_success 'setup ' ' - echo test 1 >one.bin && - echo test number 2 >two.bin && + echo "bin: test 1" >one.bin && + echo "bin: test number 2" >two.bin && + if test_have_prereq SYMLINKS; then + ln -s one.bin symlink.bin + fi && git add . && GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" && - echo test 1 version 2 >one.bin && - echo test number 2 version 2 >>two.bin && + echo "bin: test 1 version 2" >one.bin && + echo "bin: test number 2 version 2" >>two.bin && + if test_have_prereq SYMLINKS; then + ln -sf two.bin symlink.bin + fi && GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00" ' cat >expected <<EOF -(Number2 2010-01-01 20:00:00 +0000 1) test 1 version 2 +(Number2 2010-01-01 20:00:00 +0000 1) bin: test 1 version 2 EOF test_expect_success 'no filter specified' ' @@ -67,7 +74,7 @@ test_expect_success 'blame --textconv going through revisions' ' ' test_expect_success 'make a new commit' ' - echo "test number 2 version 3" >>two.bin && + echo "bin: test number 2 version 3" >>two.bin && GIT_AUTHOR_NAME=Number3 git commit -a -m Third --date="2010-01-01 22:00:00" ' @@ -77,4 +84,45 @@ test_expect_success 'blame from previous revision' ' test_cmp expected result ' +cat >expected <<EOF +(Number2 2010-01-01 20:00:00 +0000 1) two.bin +EOF + +test_expect_success SYMLINKS 'blame with --no-textconv (on symlink)' ' + git blame --no-textconv symlink.bin >blame && + find_blame <blame >result && + test_cmp expected result +' + +test_expect_success SYMLINKS 'blame --textconv (on symlink)' ' + git blame --textconv symlink.bin >blame && + find_blame <blame >result && + test_cmp expected result +' + +# cp two.bin three.bin and make small tweak +# (this will direct blame -C -C three.bin to consider two.bin and symlink.bin) +test_expect_success SYMLINKS 'make another new commit' ' + cat >three.bin <<\EOF && +bin: test number 2 +bin: test number 2 version 2 +bin: test number 2 version 3 +bin: test number 3 +EOF + git add three.bin && + GIT_AUTHOR_NAME=Number4 git commit -a -m Fourth --date="2010-01-01 23:00:00" +' + +test_expect_success SYMLINKS 'blame on last commit (-C -C, symlink)' ' + git blame -C -C three.bin >blame && + find_blame <blame >result && + cat >expected <<\EOF && +(Number1 2010-01-01 18:00:00 +0000 1) converted: test number 2 +(Number2 2010-01-01 20:00:00 +0000 2) converted: test number 2 version 2 +(Number3 2010-01-01 22:00:00 +0000 3) converted: test number 2 version 3 +(Number4 2010-01-01 23:00:00 +0000 4) converted: test number 3 +EOF + test_cmp expected result +' + test_done diff --git a/t/t8007-cat-file-textconv.sh b/t/t8007-cat-file-textconv.sh index 38ac05e4a0..78a0085e64 100755 --- a/t/t8007-cat-file-textconv.sh +++ b/t/t8007-cat-file-textconv.sh @@ -5,15 +5,19 @@ test_description='git cat-file textconv support' cat >helper <<'EOF' #!/bin/sh -sed 's/^/converted: /' "$@" +grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; } +sed 's/^bin: /converted: /' "$1" EOF chmod +x helper test_expect_success 'setup ' ' - echo test >one.bin && + echo "bin: test" >one.bin && + if test_have_prereq SYMLINKS; then + ln -s one.bin symlink.bin + fi && git add . && GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" && - echo test version 2 >one.bin && + echo "bin: test version 2" >one.bin && GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00" ' @@ -33,7 +37,7 @@ test_expect_success 'setup textconv filters' ' ' cat >expected <<EOF -test version 2 +bin: test version 2 EOF test_expect_success 'cat-file without --textconv' ' @@ -42,7 +46,7 @@ test_expect_success 'cat-file without --textconv' ' ' cat >expected <<EOF -test +bin: test EOF test_expect_success 'cat-file without --textconv on previous commit' ' @@ -67,4 +71,28 @@ test_expect_success 'cat-file --textconv on previous commit' ' git cat-file --textconv HEAD^:one.bin >result && test_cmp expected result ' + +test_expect_success SYMLINKS 'cat-file without --textconv (symlink)' ' + git cat-file blob :symlink.bin >result && + printf "%s" "one.bin" >expected + test_cmp expected result +' + + +test_expect_success SYMLINKS 'cat-file --textconv on index (symlink)' ' + ! git cat-file --textconv :symlink.bin 2>result && + cat >expected <<\EOF && +fatal: git cat-file --textconv: unable to run textconv on :symlink.bin +EOF + test_cmp expected result +' + +test_expect_success SYMLINKS 'cat-file --textconv on HEAD (symlink)' ' + ! git cat-file --textconv HEAD:symlink.bin 2>result && + cat >expected <<EOF && +fatal: git cat-file --textconv: unable to run textconv on HEAD:symlink.bin +EOF + test_cmp expected result +' + test_done diff --git a/t/test-lib.sh b/t/test-lib.sh index 2af8f10c83..38e5a59ff7 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -238,14 +238,51 @@ test_set_editor () { } test_decode_color () { - sed -e 's/.\[1m/<WHITE>/g' \ - -e 's/.\[31m/<RED>/g' \ - -e 's/.\[32m/<GREEN>/g' \ - -e 's/.\[33m/<YELLOW>/g' \ - -e 's/.\[34m/<BLUE>/g' \ - -e 's/.\[35m/<MAGENTA>/g' \ - -e 's/.\[36m/<CYAN>/g' \ - -e 's/.\[m/<RESET>/g' + awk ' + function name(n) { + if (n == 0) return "RESET"; + if (n == 1) return "BOLD"; + if (n == 30) return "BLACK"; + if (n == 31) return "RED"; + if (n == 32) return "GREEN"; + if (n == 33) return "YELLOW"; + if (n == 34) return "BLUE"; + if (n == 35) return "MAGENTA"; + if (n == 36) return "CYAN"; + if (n == 37) return "WHITE"; + if (n == 40) return "BLACK"; + if (n == 41) return "BRED"; + if (n == 42) return "BGREEN"; + if (n == 43) return "BYELLOW"; + if (n == 44) return "BBLUE"; + if (n == 45) return "BMAGENTA"; + if (n == 46) return "BCYAN"; + if (n == 47) return "BWHITE"; + } + { + while (match($0, /\x1b\[[0-9;]*m/) != 0) { + printf "%s<", substr($0, 1, RSTART-1); + codes = substr($0, RSTART+2, RLENGTH-3); + if (length(codes) == 0) + printf "%s", name(0) + else { + n = split(codes, ary, ";"); + sep = ""; + for (i = 1; i <= n; i++) { + printf "%s%s", sep, name(ary[i]); + sep = ";" + } + } + printf ">"; + $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1); + } + print + } + ' +} + +nul_to_q () { + perl -pe 'y/\000/Q/' } q_to_nul () { @@ -362,6 +399,15 @@ test_have_prereq () { test $total_prereq = $ok_prereq } +test_declared_prereq () { + case ",$test_prereq," in + *,$1,*) + return 0 + ;; + esac + return 1 +} + # You are not expected to call test_ok_ and test_failure_ directly, use # the text_expect_* functions instead. @@ -414,17 +460,17 @@ test_skip () { break esac done - if test -z "$to_skip" && test -n "$prereq" && - ! test_have_prereq "$prereq" + if test -z "$to_skip" && test -n "$test_prereq" && + ! test_have_prereq "$test_prereq" then to_skip=t fi case "$to_skip" in t) of_prereq= - if test "$missing_prereq" != "$prereq" + if test "$missing_prereq" != "$test_prereq" then - of_prereq=" of $prereq" + of_prereq=" of $test_prereq" fi say_color skip >&3 "skipping test: $@" @@ -438,9 +484,10 @@ test_skip () { } test_expect_failure () { - test "$#" = 3 && { prereq=$1; shift; } || prereq= + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-failure" + export test_prereq if ! test_skip "$@" then say >&3 "checking known breakage: $2" @@ -456,9 +503,10 @@ test_expect_failure () { } test_expect_success () { - test "$#" = 3 && { prereq=$1; shift; } || prereq= + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-success" + export test_prereq if ! test_skip "$@" then say >&3 "expecting success: $2" @@ -500,11 +548,12 @@ test_expect_code () { # Usage: test_external description command arguments... # Example: test_external 'Perl API' perl ../path/to/test.pl test_external () { - test "$#" = 4 && { prereq=$1; shift; } || prereq= + test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 3 || error >&5 "bug in the test script: not 3 or 4 parameters to test_external" descr="$1" shift + export test_prereq if ! test_skip "$descr" "$@" then # Announce the script to reduce confusion about the diff --git a/t/t7006/test-terminal.perl b/t/test-terminal.perl index 6b5f22ae4a..ee01eb957e 100755 --- a/t/t7006/test-terminal.perl +++ b/t/test-terminal.perl @@ -5,14 +5,15 @@ use warnings; use IO::Pty; use File::Copy; -# Run @$argv in the background with stdout redirected to $out. +# Run @$argv in the background with stdio redirected to $out and $err. sub start_child { - my ($argv, $out) = @_; + my ($argv, $out, $err) = @_; my $pid = fork; if (not defined $pid) { die "fork failed: $!" } elsif ($pid == 0) { open STDOUT, ">&", $out; + open STDERR, ">&", $err; close $out; exec(@$argv) or die "cannot exec '$argv->[0]': $!" } @@ -48,12 +49,28 @@ sub xsendfile { copy($in, $out, 4096) or $!{EIO} or die "cannot copy from child: $!"; } +sub copy_stdio { + my ($out, $err) = @_; + my $pid = fork; + defined $pid or die "fork failed: $!"; + if (!$pid) { + close($out); + xsendfile(\*STDERR, $err); + exit 0; + } + close($err); + xsendfile(\*STDOUT, $out); + finish_child($pid) == 0 + or exit 1; +} + if ($#ARGV < 1) { die "usage: test-terminal program args"; } -my $master = new IO::Pty; -my $slave = $master->slave; -my $pid = start_child(\@ARGV, $slave); -close $slave; -xsendfile(\*STDOUT, $master); +my $master_out = new IO::Pty; +my $master_err = new IO::Pty; +my $pid = start_child(\@ARGV, $master_out->slave, $master_err->slave); +close $master_out->slave; +close $master_err->slave; +copy_stdio($master_out, $master_err); exit(finish_child($pid)); |