diff options
Diffstat (limited to 't')
| -rw-r--r-- | t/lib-submodule-update.sh | 16 | ||||
| -rwxr-xr-x | t/perf/p7519-fsmonitor.sh | 7 | ||||
| -rwxr-xr-x | t/t5526-fetch-submodules.sh | 117 | ||||
| -rwxr-xr-x | t/t7012-skip-worktree-writing.sh | 88 | ||||
| -rw-r--r-- | t/test-lib-functions.sh | 9 |
5 files changed, 226 insertions, 11 deletions
diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index bd3fa3c6da..4b714e9308 100644 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -316,14 +316,7 @@ test_submodule_switch_common () { command="$1" ######################### Appearing submodule ######################### # Switching to a commit letting a submodule appear creates empty dir ... - if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1 - then - # Restoring stash fails to restore submodule index entry - RESULT="failure" - else - RESULT="success" - fi - test_expect_$RESULT "$command: added submodule creates empty directory" ' + test_expect_success "$command: added submodule creates empty directory" ' prolog && reset_work_tree_to no_submodule && ( @@ -337,6 +330,13 @@ test_submodule_switch_common () { ) ' # ... and doesn't care if it already exists. + if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1 + then + # Restoring stash fails to restore submodule index entry + RESULT="failure" + else + RESULT="success" + fi test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" ' prolog && reset_work_tree_to no_submodule && diff --git a/t/perf/p7519-fsmonitor.sh b/t/perf/p7519-fsmonitor.sh index 9b43342806..1e20a184c7 100755 --- a/t/perf/p7519-fsmonitor.sh +++ b/t/perf/p7519-fsmonitor.sh @@ -129,7 +129,12 @@ setup_for_fsmonitor() { git config core.fsmonitor "$INTEGRATION_SCRIPT" && git update-index --fsmonitor 2>error && - test_must_be_empty error # ensure no silent error + if test_have_prereq WATCHMAN + then + test_must_be_empty error # ensure no silent error + else + grep "Empty last update token" error + fi } test_perf_w_drop_caches () { diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index a877dd145e..53d7b8ed75 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -722,4 +722,121 @@ test_expect_success 'fetch new submodule commit intermittently referenced by sup ) ' +add_commit_push () { + dir="$1" && + msg="$2" && + shift 2 && + git -C "$dir" add "$@" && + git -C "$dir" commit -a -m "$msg" && + git -C "$dir" push +} + +compare_refs_in_dir () { + fail= && + if test "x$1" = 'x!' + then + fail='!' && + shift + fi && + git -C "$1" rev-parse --verify "$2" >expect && + git -C "$3" rev-parse --verify "$4" >actual && + eval $fail test_cmp expect actual +} + + +test_expect_success 'setup nested submodule fetch test' ' + # does not depend on any previous test setups + + for repo in outer middle inner + do + git init --bare $repo && + git clone $repo ${repo}_content && + echo "$repo" >"${repo}_content/file" && + add_commit_push ${repo}_content "initial" file || + return 1 + done && + + git clone outer A && + git -C A submodule add "$pwd/middle" && + git -C A/middle/ submodule add "$pwd/inner" && + add_commit_push A/middle/ "adding inner sub" .gitmodules inner && + add_commit_push A/ "adding middle sub" .gitmodules middle && + + git clone outer B && + git -C B/ submodule update --init middle && + + compare_refs_in_dir A HEAD B HEAD && + compare_refs_in_dir A/middle HEAD B/middle HEAD && + test_path_is_file B/file && + test_path_is_file B/middle/file && + test_path_is_missing B/middle/inner/file && + + echo "change on inner repo of A" >"A/middle/inner/file" && + add_commit_push A/middle/inner "change on inner" file && + add_commit_push A/middle "change on inner" inner && + add_commit_push A "change on inner" middle +' + +test_expect_success 'fetching a superproject containing an uninitialized sub/sub project' ' + # depends on previous test for setup + + git -C B/ fetch && + compare_refs_in_dir A origin/HEAD B origin/HEAD +' + +fetch_with_recursion_abort () { + # In a regression the following git call will run into infinite recursion. + # To handle that, we connect the sed command to the git call by a pipe + # so that sed can kill the infinite recursion when detected. + # The recursion creates git output like: + # Fetching submodule sub + # Fetching submodule sub/sub <-- [1] + # Fetching submodule sub/sub/sub + # ... + # [1] sed will stop reading and cause git to eventually stop and die + + git -C "$1" fetch --recurse-submodules 2>&1 | + sed "/Fetching submodule $2[^$]/q" >out && + ! grep "Fetching submodule $2[^$]" out +} + +test_expect_success 'setup recursive fetch with uninit submodule' ' + # does not depend on any previous test setups + + test_create_repo super && + test_commit -C super initial && + test_create_repo sub && + test_commit -C sub initial && + git -C sub rev-parse HEAD >expect && + + git -C super submodule add ../sub && + git -C super commit -m "add sub" && + + git clone super superclone && + git -C superclone submodule status >out && + sed -e "s/^-//" -e "s/ sub.*$//" out >actual && + test_cmp expect actual +' + +test_expect_success 'recursive fetch with uninit submodule' ' + # depends on previous test for setup + + fetch_with_recursion_abort superclone sub && + git -C superclone submodule status >out && + sed -e "s/^-//" -e "s/ sub$//" out >actual && + test_cmp expect actual +' + +test_expect_success 'recursive fetch after deinit a submodule' ' + # depends on previous test for setup + + git -C superclone submodule update --init sub && + git -C superclone submodule deinit -f sub && + + fetch_with_recursion_abort superclone sub && + git -C superclone submodule status >out && + sed -e "s/^-//" -e "s/ sub$//" out >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7012-skip-worktree-writing.sh b/t/t7012-skip-worktree-writing.sh index 7476781979..e5c6a038fb 100755 --- a/t/t7012-skip-worktree-writing.sh +++ b/t/t7012-skip-worktree-writing.sh @@ -149,6 +149,94 @@ test_expect_success '--ignore-skip-worktree-entries leaves worktree alone' ' --diff-filter=D -- keep-me.t ' +test_expect_success 'stash restore in sparse checkout' ' + test_create_repo stash-restore && + ( + cd stash-restore && + + mkdir subdir && + echo A >subdir/A && + echo untouched >untouched && + echo removeme >removeme && + echo modified >modified && + git add . && + git commit -m Initial && + + echo AA >>subdir/A && + echo addme >addme && + echo tweaked >>modified && + rm removeme && + git add addme && + + git stash push && + + git sparse-checkout set subdir && + + # Ensure after sparse-checkout we only have expected files + cat >expect <<-EOF && + S modified + S removeme + H subdir/A + S untouched + EOF + git ls-files -t >actual && + test_cmp expect actual && + + test_path_is_missing addme && + test_path_is_missing modified && + test_path_is_missing removeme && + test_path_is_file subdir/A && + test_path_is_missing untouched && + + # Put a file in the working directory in the way + echo in the way >modified && + git stash apply && + + # Ensure stash vivifies modifies paths... + cat >expect <<-EOF && + H addme + H modified + H removeme + H subdir/A + S untouched + EOF + git ls-files -t >actual && + test_cmp expect actual && + + # ...and that the paths show up in status as changed... + cat >expect <<-EOF && + A addme + M modified + D removeme + M subdir/A + ?? actual + ?? expect + ?? modified.stash.XXXXXX + EOF + git status --porcelain | \ + sed -e s/stash......./stash.XXXXXX/ >actual && + test_cmp expect actual && + + # ...and that working directory reflects the files correctly + test_path_is_file addme && + test_path_is_file modified && + test_path_is_missing removeme && + test_path_is_file subdir/A && + test_path_is_missing untouched && + + # ...including that we have the expected "modified" file... + cat >expect <<-EOF && + modified + tweaked + EOF + test_cmp expect modified && + + # ...and that the other "modified" file is still present... + echo in the way >expect && + test_cmp expect modified.stash.* + ) +' + #TODO test_expect_failure 'git-apply adds file' false #TODO test_expect_failure 'git-apply updates file' false #TODO test_expect_failure 'git-apply removes file' false diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 999982fe4a..2f08ce7cba 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -367,9 +367,14 @@ test_chmod () { git update-index --add "--chmod=$@" } -# Get the modebits from a file or directory. +# Get the modebits from a file or directory, ignoring the setgid bit (g+s). +# This bit is inherited by subdirectories at their creation. So we remove it +# from the returning string to prevent callers from having to worry about the +# state of the bit in the test directory. +# test_modebits () { - ls -ld "$1" | sed -e 's|^\(..........\).*|\1|' + ls -ld "$1" | sed -e 's|^\(..........\).*|\1|' \ + -e 's|^\(......\)S|\1-|' -e 's|^\(......\)s|\1x|' } # Unset a configuration variable, but don't fail if it doesn't exist. |