diff options
Diffstat (limited to 't')
| -rwxr-xr-x | t/t4014-format-patch.sh | 197 |
1 files changed, 120 insertions, 77 deletions
diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 67f4c62ed6..83f52614d3 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -33,7 +33,8 @@ test_expect_success setup ' git commit -m "Side changes #3 with \\n backslash-n in it." && git checkout master && - git diff-tree -p C2 | git apply --index && + git diff-tree -p C2 >patch && + git apply --index <patch && test_tick && git commit -m "Master accepts moral equivalent of #2" && @@ -110,7 +111,8 @@ test_expect_success 'format-patch --ignore-if-in-upstream result applies' ' ' test_expect_success 'commit did not screw up the log message' ' - git cat-file commit side | grep "^Side .* with .* backslash-n" + git cat-file commit side >actual && + grep "^Side .* with .* backslash-n" actual ' test_expect_success 'format-patch did not screw up the log message' ' @@ -119,7 +121,8 @@ test_expect_success 'format-patch did not screw up the log message' ' ' test_expect_success 'replay did not screw up the log message' ' - git cat-file commit rebuild-1 | grep "^Side .* with .* backslash-n" + git cat-file commit rebuild-1 >actual && + grep "^Side .* with .* backslash-n" actual ' test_expect_success 'extra headers' ' @@ -153,63 +156,73 @@ test_expect_success 'extra headers with multiple To:s' ' test_expect_success 'additional command line cc (ascii)' ' git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" && - git format-patch --cc="S E Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch5 && - grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch5 && - grep "^ *S E Cipient <scipient@example.com>\$" patch5 + git format-patch --cc="S E Cipient <scipient@example.com>" --stdout master..side >patch5 && + sed -e "/^\$/q" patch5 >hdrs5 && + grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs5 && + grep "^ *S E Cipient <scipient@example.com>\$" hdrs5 ' test_expect_failure 'additional command line cc (rfc822)' ' git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" && - git format-patch --cc="S. E. Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch5 && - grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch5 && - grep "^ *\"S. E. Cipient\" <scipient@example.com>\$" patch5 + git format-patch --cc="S. E. Cipient <scipient@example.com>" --stdout master..side >patch5 && + sed -e "/^\$/q" patch5 >hdrs5 && + grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs5 && + grep "^ *\"S. E. Cipient\" <scipient@example.com>\$" hdrs5 ' test_expect_success 'command line headers' ' git config --unset-all format.headers && - git format-patch --add-header="Cc: R E Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch6 && - grep "^Cc: R E Cipient <rcipient@example.com>\$" patch6 + git format-patch --add-header="Cc: R E Cipient <rcipient@example.com>" --stdout master..side >patch6 && + sed -e "/^\$/q" patch6 >hdrs6 && + grep "^Cc: R E Cipient <rcipient@example.com>\$" hdrs6 ' test_expect_success 'configuration headers and command line headers' ' git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" && - git format-patch --add-header="Cc: S E Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch7 && - grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch7 && - grep "^ *S E Cipient <scipient@example.com>\$" patch7 + git format-patch --add-header="Cc: S E Cipient <scipient@example.com>" --stdout master..side >patch7 && + sed -e "/^\$/q" patch7 >hdrs7 && + grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs7 && + grep "^ *S E Cipient <scipient@example.com>\$" hdrs7 ' test_expect_success 'command line To: header (ascii)' ' git config --unset-all format.headers && - git format-patch --to="R E Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 && - grep "^To: R E Cipient <rcipient@example.com>\$" patch8 + git format-patch --to="R E Cipient <rcipient@example.com>" --stdout master..side >patch8 && + sed -e "/^\$/q" patch8 >hdrs8 && + grep "^To: R E Cipient <rcipient@example.com>\$" hdrs8 ' test_expect_failure 'command line To: header (rfc822)' ' - git format-patch --to="R. E. Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 && - grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" patch8 + git format-patch --to="R. E. Cipient <rcipient@example.com>" --stdout master..side >patch8 && + sed -e "/^\$/q" patch8 >hdrs8 && + grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" hdrs8 ' test_expect_failure 'command line To: header (rfc2047)' ' - git format-patch --to="R Ä Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 && - grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" patch8 + git format-patch --to="R Ä Cipient <rcipient@example.com>" --stdout master..side >patch8 && + sed -e "/^\$/q" patch8 >hdrs8 && + grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" hdrs8 ' test_expect_success 'configuration To: header (ascii)' ' git config format.to "R E Cipient <rcipient@example.com>" && - git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 && - grep "^To: R E Cipient <rcipient@example.com>\$" patch9 + git format-patch --stdout master..side >patch9 && + sed -e "/^\$/q" patch9 >hdrs9 && + grep "^To: R E Cipient <rcipient@example.com>\$" hdrs9 ' test_expect_failure 'configuration To: header (rfc822)' ' git config format.to "R. E. Cipient <rcipient@example.com>" && - git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 && - grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" patch9 + git format-patch --stdout master..side >patch9 && + sed -e "/^\$/q" patch9 >hdrs9 && + grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" hdrs9 ' test_expect_failure 'configuration To: header (rfc2047)' ' git config format.to "R Ä Cipient <rcipient@example.com>" && - git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 && - grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" patch9 + git format-patch --stdout master..side >patch9 && + sed -e "/^\$/q" patch9 >hdrs9 && + grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" hdrs9 ' # check_patch <patch>: Verify that <patch> looks like a half-sane @@ -221,76 +234,76 @@ check_patch () { } test_expect_success 'format.from=false' ' - git -c format.from=false format-patch --stdout master..side | - sed -e "/^\$/q" >patch && + git -c format.from=false format-patch --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && check_patch patch && - ! grep "^From: C O Mitter <committer@example.com>\$" patch + ! grep "^From: C O Mitter <committer@example.com>\$" hdrs ' test_expect_success 'format.from=true' ' - git -c format.from=true format-patch --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - grep "^From: C O Mitter <committer@example.com>\$" patch + git -c format.from=true format-patch --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + grep "^From: C O Mitter <committer@example.com>\$" hdrs ' test_expect_success 'format.from with address' ' - git -c format.from="F R Om <from@example.com>" format-patch --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - grep "^From: F R Om <from@example.com>\$" patch + git -c format.from="F R Om <from@example.com>" format-patch --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + grep "^From: F R Om <from@example.com>\$" hdrs ' test_expect_success '--no-from overrides format.from' ' - git -c format.from="F R Om <from@example.com>" format-patch --no-from --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - ! grep "^From: F R Om <from@example.com>\$" patch + git -c format.from="F R Om <from@example.com>" format-patch --no-from --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + ! grep "^From: F R Om <from@example.com>\$" hdrs ' test_expect_success '--from overrides format.from' ' - git -c format.from="F R Om <from@example.com>" format-patch --from --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - ! grep "^From: F R Om <from@example.com>\$" patch + git -c format.from="F R Om <from@example.com>" format-patch --from --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + ! grep "^From: F R Om <from@example.com>\$" hdrs ' test_expect_success '--no-to overrides config.to' ' git config --replace-all format.to \ "R E Cipient <rcipient@example.com>" && - git format-patch --no-to --stdout master..side | - sed -e "/^\$/q" >patch10 && - check_patch patch10 && - ! grep "^To: R E Cipient <rcipient@example.com>\$" patch10 + git format-patch --no-to --stdout master..side >patch10 && + sed -e "/^\$/q" patch10 >hdrs10 && + check_patch hdrs10 && + ! grep "^To: R E Cipient <rcipient@example.com>\$" hdrs10 ' test_expect_success '--no-to and --to replaces config.to' ' git config --replace-all format.to \ "Someone <someone@out.there>" && git format-patch --no-to --to="Someone Else <else@out.there>" \ - --stdout master..side | - sed -e "/^\$/q" >patch11 && - check_patch patch11 && - ! grep "^To: Someone <someone@out.there>\$" patch11 && - grep "^To: Someone Else <else@out.there>\$" patch11 + --stdout master..side >patch11 && + sed -e "/^\$/q" patch11 >hdrs11 && + check_patch hdrs11 && + ! grep "^To: Someone <someone@out.there>\$" hdrs11 && + grep "^To: Someone Else <else@out.there>\$" hdrs11 ' test_expect_success '--no-cc overrides config.cc' ' git config --replace-all format.cc \ "C E Cipient <rcipient@example.com>" && - git format-patch --no-cc --stdout master..side | - sed -e "/^\$/q" >patch12 && - check_patch patch12 && - ! grep "^Cc: C E Cipient <rcipient@example.com>\$" patch12 + git format-patch --no-cc --stdout master..side >patch12 && + sed -e "/^\$/q" patch12 >hdrs12 && + check_patch hdrs12 && + ! grep "^Cc: C E Cipient <rcipient@example.com>\$" hdrs12 ' test_expect_success '--no-add-header overrides config.headers' ' git config --replace-all format.headers \ "Header1: B E Cipient <rcipient@example.com>" && - git format-patch --no-add-header --stdout master..side | - sed -e "/^\$/q" >patch13 && - check_patch patch13 && - ! grep "^Header1: B E Cipient <rcipient@example.com>\$" patch13 + git format-patch --no-add-header --stdout master..side >patch13 && + sed -e "/^\$/q" patch13 >hdrs13 && + check_patch hdrs13 && + ! grep "^Header1: B E Cipient <rcipient@example.com>\$" hdrs13 ' test_expect_success 'multiple files' ' @@ -808,20 +821,25 @@ test_expect_success 'format-patch --ignore-if-in-upstream HEAD' ' git format-patch --ignore-if-in-upstream HEAD ' -git_version="$(git --version | sed "s/.* //")" +test_expect_success 'get git version' ' + git_version=$(git --version) && + git_version=${git_version##* } +' signature() { printf "%s\n%s\n\n" "-- " "${1:-$git_version}" } test_expect_success 'format-patch default signature' ' - git format-patch --stdout -1 | tail -n 3 >output && + git format-patch --stdout -1 >patch && + tail -n 3 patch >output && signature >expect && test_cmp expect output ' test_expect_success 'format-patch --signature' ' - git format-patch --stdout --signature="my sig" -1 | tail -n 3 >output && + git format-patch --stdout --signature="my sig" -1 >patch && + tail -n 3 patch >output && signature "my sig" >expect && test_cmp expect output ' @@ -1606,19 +1624,40 @@ test_expect_success 'format-patch -o overrides format.outputDirectory' ' test_expect_success 'format-patch --base' ' git checkout patchid && - git format-patch --stdout --base=HEAD~3 -1 | tail -n 7 >actual1 && - git format-patch --stdout --base=HEAD~3 HEAD~.. | tail -n 7 >actual2 && + + git format-patch --stdout --base=HEAD~3 -1 >patch && + tail -n 7 patch >actual1 && + + git format-patch --stdout --base=HEAD~3 HEAD~.. >patch && + tail -n 7 patch >actual2 && + echo >expect && - echo "base-commit: $(git rev-parse HEAD~3)" >>expect && - echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --stable | awk "{print \$1}")" >>expect && - echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --stable | awk "{print \$1}")" >>expect && + git rev-parse HEAD~3 >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >>expect && + + git show --patch HEAD~2 >patch && + git patch-id --stable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>expect && + + git show --patch HEAD~1 >patch && + git patch-id --stable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>expect && + signature >>expect && test_cmp expect actual1 && test_cmp expect actual2 && + echo >fail && - echo "base-commit: $(git rev-parse HEAD~3)" >>fail && - echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --unstable | awk "{print \$1}")" >>fail && - echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --unstable | awk "{print \$1}")" >>fail && + echo "base-commit: $(cat commit-id-base)" >>fail && + + git show --patch HEAD~2 >patch && + git patch-id --unstable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>fail && + + git show --patch HEAD~1 >patch && + git patch-id --unstable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>fail && + signature >>fail && ! test_cmp fail actual1 && ! test_cmp fail actual2 @@ -1629,7 +1668,8 @@ test_expect_success 'format-patch --base errors out when base commit is in revis test_must_fail git format-patch --base=HEAD~1 -2 && git format-patch --stdout --base=HEAD~2 -2 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse HEAD~2)" >expect && + git rev-parse HEAD~2 >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && test_cmp expect actual ' @@ -1668,7 +1708,8 @@ test_expect_success 'format-patch --base=auto' ' test_commit N2 && git format-patch --stdout --base=auto -2 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse upstream)" >expect && + git rev-parse upstream >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && test_cmp expect actual ' @@ -1705,7 +1746,8 @@ test_expect_success 'format-patch format.useAutoBaseoption' ' git config format.useAutoBase true && git format-patch --stdout -1 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse upstream)" >expect && + git rev-parse upstream >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && test_cmp expect actual ' @@ -1714,7 +1756,8 @@ test_expect_success 'format-patch --base overrides format.useAutoBase' ' git config format.useAutoBase true && git format-patch --stdout --base=HEAD~1 -1 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse HEAD~1)" >expect && + git rev-parse HEAD~1 >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && test_cmp expect actual ' |