diff options
Diffstat (limited to 't')
320 files changed, 13956 insertions, 3077 deletions
@@ -196,11 +196,10 @@ appropriately before running "make". variable to "1" or "0", respectively. --stress:: ---stress=<N>:: Run the test script repeatedly in multiple parallel jobs until one of them fails. Useful for reproducing rare failures in flaky tests. The number of parallel jobs is, in order of - precedence: <N>, or the value of the GIT_TEST_STRESS_LOAD + precedence: the value of the GIT_TEST_STRESS_LOAD environment variable, or twice the number of available processors (as shown by the 'getconf' utility), or 8. Implies `--verbose -x --immediate` to get the most information @@ -211,6 +210,14 @@ appropriately before running "make". '.stress-<nr>' suffix, and the trash directory of the failed test job is renamed to end with a '.stress-failed' suffix. +--stress-jobs=<N>:: + Override the number of parallel jobs. Implies `--stress`. + +--stress-limit=<N>:: + When combined with --stress run the test script repeatedly + this many times in each of the parallel jobs or until one of + them fails, whichever comes first. Implies `--stress`. + You can also set the GIT_TEST_INSTALLED environment variable to the bindir of an existing git installation to test that installation. You still need to have built this git sandbox, from which various @@ -327,15 +334,27 @@ that cannot be easily covered by a few specific test cases. These could be enabled by running the test suite with correct GIT_TEST_ environment set. -GIT_TEST_GETTEXT_POISON=<non-empty?> turns all strings marked for -translation into gibberish if non-empty (think "test -n"). Used for -spotting those tests that need to be marked with a C_LOCALE_OUTPUT -prerequisite when adding more strings for translation. See "Testing -marked strings" in po/README for details. +GIT_TEST_FAIL_PREREQS=<boolean> fails all prerequisites. This is +useful for discovering issues with the tests where say a later test +implicitly depends on an optional earlier test. + +There's a "FAIL_PREREQS" prerequisite that can be used to test for +whether this mode is active, and e.g. skip some tests that are hard to +refactor to deal with it. The "SYMLINKS" prerequisite is currently +excluded as so much relies on it, but this might change in the future. + +GIT_TEST_GETTEXT_POISON=<boolean> turns all strings marked for +translation into gibberish if true. Used for spotting those tests that +need to be marked with a C_LOCALE_OUTPUT prerequisite when adding more +strings for translation. See "Testing marked strings" in po/README for +details. GIT_TEST_SPLIT_INDEX=<boolean> forces split-index mode on the whole test suite. Accept any boolean values that are accepted by git-config. +GIT_TEST_PROTOCOL_VERSION=<n>, when set, overrides the +'protocol.version' setting to n if it is less than n. + GIT_TEST_FULL_IN_PACK_ARRAY=<boolean> exercises the uncommon pack-objects code path where there are more than 1024 packs even if the actual number of packs in repository is below this limit. Accept @@ -374,8 +393,8 @@ the --no-sparse command-line argument. GIT_TEST_PRELOAD_INDEX=<boolean> exercises the preload-index code path by overriding the minimum number of cache entries required per thread. -GIT_TEST_REBASE_USE_BUILTIN=<boolean>, when false, disables the -builtin version of git-rebase. See 'rebase.useBuiltin' in +GIT_TEST_STASH_USE_BUILTIN=<boolean>, when false, disables the +built-in version of git-stash. See 'stash.useBuiltin' in git-config(1). GIT_TEST_INDEX_THREADS=<n> enables exercising the multi-threaded loading @@ -392,6 +411,10 @@ GIT_TEST_SIDEBAND_ALL=<boolean>, when true, overrides the fetch-pack to not request sideband-all (even if the server advertises sideband-all). +GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=<boolean>, when true (which is +the default when running tests), errors out when an abbreviated option +is used. + Naming Tests ------------ @@ -857,6 +880,26 @@ library for your script to use. ... ' + - test_atexit <script> + + Prepend <script> to a list of commands to run unconditionally to + clean up before the test script exits, e.g. to stop a daemon: + + test_expect_success 'test git daemon' ' + git daemon & + daemon_pid=$! && + test_atexit 'kill $daemon_pid' && + hello world + ' + + The commands will be executed before the trash directory is removed, + i.e. the atexit commands will still be able to access any pidfiles or + socket files. + + Note that these commands will be run even when a test script run + with '--immediate' fails. Be careful with your atexit commands to + minimize any changes to the failed state. + - test_write_lines <lines> Write <lines> on standard output, one line per argument. @@ -927,6 +970,15 @@ library for your script to use. test_oid_init or test_oid_cache. Providing an unknown key is an error. + - yes [<string>] + + This is often seen in modern UNIX but some platforms lack it, so + the test harness overrides the platform implementation with a + more limited one. Use this only when feeding a handful lines of + output to the downstream---unlike the real version, it generates + only up to 99 lines. + + Prerequisites ------------- diff --git a/t/annotate-tests.sh b/t/annotate-tests.sh index 6da48a2e0a..d933af5714 100644 --- a/t/annotate-tests.sh +++ b/t/annotate-tests.sh @@ -68,6 +68,14 @@ test_expect_success 'blame 1 author' ' check_count A 2 ' +test_expect_success 'blame in a bare repo without starting commit' ' + git clone --bare . bare.git && + ( + cd bare.git && + check_count A 2 + ) +' + test_expect_success 'blame by tag objects' ' git tag -m "test tag" testTag && git tag -m "test tag #2" testTag2 testTag && diff --git a/t/check-non-portable-shell.pl b/t/check-non-portable-shell.pl index 166d64d4a2..38bfeebd88 100755 --- a/t/check-non-portable-shell.pl +++ b/t/check-non-portable-shell.pl @@ -27,14 +27,14 @@ for my $i (@ARGV) { close $f; } +my $line = ''; while (<>) { chomp; + $line .= $_; # stitch together incomplete lines (those ending with "\") - while (s/\\$//) { - $_ .= readline; - chomp; - } + next if $line =~ s/\\$//; + $_ = $line; /\bcp\s+-a/ and err 'cp -a is not portable'; /\bsed\s+-[^efn]\s+/ and err 'sed option not portable (use only -n, -e, -f)'; /\becho\s+-[neE]/ and err 'echo with option is not portable (use printf)'; @@ -48,6 +48,7 @@ while (<>) { /\bexport\s+[A-Za-z0-9_]*=/ and err '"export FOO=bar" is not portable (use FOO=bar && export FOO)'; /^\s*([A-Z0-9_]+=(\w+|(["']).*?\3)\s+)+(\w+)/ and exists($func{$4}) and err '"FOO=bar shell_func" assignment extends beyond "shell_func"'; + $line = ''; # this resets our $. for each file close ARGV if eof; } diff --git a/t/helper/test-date.c b/t/helper/test-date.c index b3253803ac..099eff4f0f 100644 --- a/t/helper/test-date.c +++ b/t/helper/test-date.c @@ -12,13 +12,13 @@ static const char *usage_msg = "\n" " test-tool date is64bit\n" " test-tool date time_t-is64bit\n"; -static void show_relative_dates(const char **argv, struct timeval *now) +static void show_relative_dates(const char **argv) { struct strbuf buf = STRBUF_INIT; for (; *argv; argv++) { time_t t = atoi(*argv); - show_date_relative(t, now, &buf); + show_date_relative(t, &buf); printf("%s -> %s\n", *argv, buf.buf); } strbuf_release(&buf); @@ -55,7 +55,7 @@ static void show_dates(const char **argv, const char *format) } } -static void parse_dates(const char **argv, struct timeval *now) +static void parse_dates(const char **argv) { struct strbuf result = STRBUF_INIT; @@ -74,20 +74,20 @@ static void parse_dates(const char **argv, struct timeval *now) strbuf_release(&result); } -static void parse_approxidate(const char **argv, struct timeval *now) +static void parse_approxidate(const char **argv) { for (; *argv; argv++) { timestamp_t t; - t = approxidate_relative(*argv, now); + t = approxidate_relative(*argv); printf("%s -> %s\n", *argv, show_date(t, 0, DATE_MODE(ISO8601))); } } -static void parse_approx_timestamp(const char **argv, struct timeval *now) +static void parse_approx_timestamp(const char **argv) { for (; *argv; argv++) { timestamp_t t; - t = approxidate_relative(*argv, now); + t = approxidate_relative(*argv); printf("%s -> %"PRItime"\n", *argv, t); } } @@ -103,32 +103,23 @@ static void getnanos(const char **argv) int cmd__date(int argc, const char **argv) { - struct timeval now; const char *x; - x = getenv("GIT_TEST_DATE_NOW"); - if (x) { - now.tv_sec = atoi(x); - now.tv_usec = 0; - } - else - gettimeofday(&now, NULL); - argv++; if (!*argv) usage(usage_msg); if (!strcmp(*argv, "relative")) - show_relative_dates(argv+1, &now); + show_relative_dates(argv+1); else if (!strcmp(*argv, "human")) show_human_dates(argv+1); else if (skip_prefix(*argv, "show:", &x)) show_dates(argv+1, x); else if (!strcmp(*argv, "parse")) - parse_dates(argv+1, &now); + parse_dates(argv+1); else if (!strcmp(*argv, "approxidate")) - parse_approxidate(argv+1, &now); + parse_approxidate(argv+1); else if (!strcmp(*argv, "timestamp")) - parse_approx_timestamp(argv+1, &now); + parse_approx_timestamp(argv+1); else if (!strcmp(*argv, "getnanos")) getnanos(argv+1); else if (!strcmp(*argv, "is64bit")) diff --git a/t/helper/test-dir-iterator.c b/t/helper/test-dir-iterator.c new file mode 100644 index 0000000000..659b6bfa81 --- /dev/null +++ b/t/helper/test-dir-iterator.c @@ -0,0 +1,65 @@ +#include "test-tool.h" +#include "git-compat-util.h" +#include "strbuf.h" +#include "iterator.h" +#include "dir-iterator.h" + +static const char *error_name(int error_number) +{ + switch (error_number) { + case ENOENT: return "ENOENT"; + case ENOTDIR: return "ENOTDIR"; + default: return "ESOMETHINGELSE"; + } +} + +/* + * usage: + * tool-test dir-iterator [--follow-symlinks] [--pedantic] directory_path + */ +int cmd__dir_iterator(int argc, const char **argv) +{ + struct dir_iterator *diter; + unsigned int flags = 0; + int iter_status; + + for (++argv, --argc; *argv && starts_with(*argv, "--"); ++argv, --argc) { + if (strcmp(*argv, "--follow-symlinks") == 0) + flags |= DIR_ITERATOR_FOLLOW_SYMLINKS; + else if (strcmp(*argv, "--pedantic") == 0) + flags |= DIR_ITERATOR_PEDANTIC; + else + die("invalid option '%s'", *argv); + } + + if (!*argv || argc != 1) + die("dir-iterator needs exactly one non-option argument"); + + diter = dir_iterator_begin(*argv, flags); + + if (!diter) { + printf("dir_iterator_begin failure: %s\n", error_name(errno)); + exit(EXIT_FAILURE); + } + + while ((iter_status = dir_iterator_advance(diter)) == ITER_OK) { + if (S_ISDIR(diter->st.st_mode)) + printf("[d] "); + else if (S_ISREG(diter->st.st_mode)) + printf("[f] "); + else if (S_ISLNK(diter->st.st_mode)) + printf("[s] "); + else + printf("[?] "); + + printf("(%s) [%s] %s\n", diter->relative_path, diter->basename, + diter->path.buf); + } + + if (iter_status != ITER_DONE) { + printf("dir_iterator_advance failure\n"); + return 1; + } + + return 0; +} diff --git a/t/helper/test-example-decorate.c b/t/helper/test-example-decorate.c index a20a6161e4..c8a1cde7d2 100644 --- a/t/helper/test-example-decorate.c +++ b/t/helper/test-example-decorate.c @@ -26,8 +26,8 @@ int cmd__example_decorate(int argc, const char **argv) * Add 2 objects, one with a non-NULL decoration and one with a NULL * decoration. */ - one = lookup_unknown_object(one_oid.hash); - two = lookup_unknown_object(two_oid.hash); + one = lookup_unknown_object(&one_oid); + two = lookup_unknown_object(&two_oid); ret = add_decoration(&n, one, &decoration_a); if (ret) BUG("when adding a brand-new object, NULL should be returned"); @@ -56,7 +56,7 @@ int cmd__example_decorate(int argc, const char **argv) ret = lookup_decoration(&n, two); if (ret != &decoration_b) BUG("lookup should return added declaration"); - three = lookup_unknown_object(three_oid.hash); + three = lookup_unknown_object(&three_oid); ret = lookup_decoration(&n, three); if (ret) BUG("lookup for unknown object should return NULL"); diff --git a/t/helper/test-genzeros.c b/t/helper/test-genzeros.c new file mode 100644 index 0000000000..9532f5bac9 --- /dev/null +++ b/t/helper/test-genzeros.c @@ -0,0 +1,21 @@ +#include "test-tool.h" +#include "git-compat-util.h" + +int cmd__genzeros(int argc, const char **argv) +{ + long count; + + if (argc > 2) { + fprintf(stderr, "usage: %s [<count>]\n", argv[0]); + return 1; + } + + count = argc > 1 ? strtol(argv[1], NULL, 0) : -1L; + + while (count < 0 || count--) { + if (putchar(0) == EOF) + return -1; + } + + return 0; +} diff --git a/t/helper/test-hashmap.c b/t/helper/test-hashmap.c index 23d2b172fe..aaf17b0ddf 100644 --- a/t/helper/test-hashmap.c +++ b/t/helper/test-hashmap.c @@ -173,14 +173,7 @@ int cmd__hashmap(int argc, const char **argv) p2 = strtok(NULL, DELIM); } - if (!strcmp("hash", cmd) && p1) { - - /* print results of different hash functions */ - printf("%u %u %u %u\n", - strhash(p1), memhash(p1, strlen(p1)), - strihash(p1), memihash(p1, strlen(p1))); - - } else if (!strcmp("add", cmd) && p1 && p2) { + if (!strcmp("add", cmd) && p1 && p2) { /* create entry with key = p1, value = p2 */ entry = alloc_test_entry(hash, p1, p2); diff --git a/t/helper/test-match-trees.c b/t/helper/test-match-trees.c index 96857f26ac..b9fd427571 100644 --- a/t/helper/test-match-trees.c +++ b/t/helper/test-match-trees.c @@ -20,7 +20,7 @@ int cmd__match_trees(int ac, const char **av) if (!two) die("not a tree-ish %s", av[2]); - shift_tree(&one->object.oid, &two->object.oid, &shifted, -1); + shift_tree(the_repository, &one->object.oid, &two->object.oid, &shifted, -1); printf("shifted: %s\n", oid_to_hex(&shifted)); exit(0); diff --git a/t/helper/test-oidmap.c b/t/helper/test-oidmap.c new file mode 100644 index 0000000000..0acf99931e --- /dev/null +++ b/t/helper/test-oidmap.c @@ -0,0 +1,112 @@ +#include "test-tool.h" +#include "cache.h" +#include "oidmap.h" +#include "strbuf.h" + +/* key is an oid and value is a name (could be a refname for example) */ +struct test_entry { + struct oidmap_entry entry; + char name[FLEX_ARRAY]; +}; + +#define DELIM " \t\r\n" + +/* + * Read stdin line by line and print result of commands to stdout: + * + * hash oidkey -> sha1hash(oidkey) + * put oidkey namevalue -> NULL / old namevalue + * get oidkey -> NULL / namevalue + * remove oidkey -> NULL / old namevalue + * iterate -> oidkey1 namevalue1\noidkey2 namevalue2\n... + * + */ +int cmd__oidmap(int argc, const char **argv) +{ + struct strbuf line = STRBUF_INIT; + struct oidmap map = OIDMAP_INIT; + + setup_git_directory(); + + /* init oidmap */ + oidmap_init(&map, 0); + + /* process commands from stdin */ + while (strbuf_getline(&line, stdin) != EOF) { + char *cmd, *p1 = NULL, *p2 = NULL; + struct test_entry *entry; + struct object_id oid; + + /* break line into command and up to two parameters */ + cmd = strtok(line.buf, DELIM); + /* ignore empty lines */ + if (!cmd || *cmd == '#') + continue; + + p1 = strtok(NULL, DELIM); + if (p1) + p2 = strtok(NULL, DELIM); + + if (!strcmp("put", cmd) && p1 && p2) { + + if (get_oid(p1, &oid)) { + printf("Unknown oid: %s\n", p1); + continue; + } + + /* create entry with oid_key = p1, name_value = p2 */ + FLEX_ALLOC_STR(entry, name, p2); + oidcpy(&entry->entry.oid, &oid); + + /* add / replace entry */ + entry = oidmap_put(&map, entry); + + /* print and free replaced entry, if any */ + puts(entry ? entry->name : "NULL"); + free(entry); + + } else if (!strcmp("get", cmd) && p1) { + + if (get_oid(p1, &oid)) { + printf("Unknown oid: %s\n", p1); + continue; + } + + /* lookup entry in oidmap */ + entry = oidmap_get(&map, &oid); + + /* print result */ + puts(entry ? entry->name : "NULL"); + + } else if (!strcmp("remove", cmd) && p1) { + + if (get_oid(p1, &oid)) { + printf("Unknown oid: %s\n", p1); + continue; + } + + /* remove entry from oidmap */ + entry = oidmap_remove(&map, &oid); + + /* print result and free entry*/ + puts(entry ? entry->name : "NULL"); + free(entry); + + } else if (!strcmp("iterate", cmd)) { + + struct oidmap_iter iter; + oidmap_iter_init(&map, &iter); + while ((entry = oidmap_iter_next(&iter))) + printf("%s %s\n", oid_to_hex(&entry->entry.oid), entry->name); + + } else { + + printf("Unknown command %s\n", cmd); + + } + } + + strbuf_release(&line); + oidmap_free(&map, 1); + return 0; +} diff --git a/t/helper/test-parse-options.c b/t/helper/test-parse-options.c index 47fee660b8..af82db06ac 100644 --- a/t/helper/test-parse-options.c +++ b/t/helper/test-parse-options.c @@ -2,6 +2,7 @@ #include "cache.h" #include "parse-options.h" #include "string-list.h" +#include "trace2.h" static int boolean = 0; static int integer = 0; @@ -131,7 +132,7 @@ int cmd__parse_options(int argc, const char **argv) OPT_NOOP_NOARG(0, "obsolete"), OPT_STRING_LIST(0, "list", &list, "str", "add str to list"), OPT_GROUP("Magic arguments"), - OPT_ARGUMENT("quux", "means --quux"), + OPT_ARGUMENT("quux", NULL, "means --quux"), OPT_NUMBER_CALLBACK(&integer, "set integer to NUM", number_callback), { OPTION_COUNTUP, '+', NULL, &boolean, NULL, "same as -b", @@ -148,11 +149,16 @@ int cmd__parse_options(int argc, const char **argv) OPT_CALLBACK(0, "expect", &expect, "string", "expected output in the variable dump", collect_expect), + OPT_GROUP("Alias"), + OPT_STRING('A', "alias-source", &string, "string", "get a string"), + OPT_ALIAS('Z', "alias-target", "alias-source"), OPT_END(), }; int i; int ret = 0; + trace2_cmd_name("_parse_"); + argc = parse_options(argc, (const char **)argv, prefix, options, usage, 0); if (length_cb.called) { diff --git a/t/helper/test-prio-queue.c b/t/helper/test-prio-queue.c index 5bc9c46ea5..f4028442e3 100644 --- a/t/helper/test-prio-queue.c +++ b/t/helper/test-prio-queue.c @@ -40,7 +40,7 @@ int cmd__prio_queue(int argc, const char **argv) } else if (!strcmp(*argv, "stack")) { pq.compare = NULL; } else { - int *v = malloc(sizeof(*v)); + int *v = xmalloc(sizeof(*v)); *v = atoi(*argv); prio_queue_put(&pq, v); } diff --git a/t/helper/test-read-cache.c b/t/helper/test-read-cache.c index d674c88ba0..244977a29b 100644 --- a/t/helper/test-read-cache.c +++ b/t/helper/test-read-cache.c @@ -1,14 +1,35 @@ #include "test-tool.h" #include "cache.h" +#include "config.h" int cmd__read_cache(int argc, const char **argv) { int i, cnt = 1; + const char *name = NULL; + + if (argc > 1 && skip_prefix(argv[1], "--print-and-refresh=", &name)) { + argc--; + argv++; + } + if (argc == 2) cnt = strtol(argv[1], NULL, 0); setup_git_directory(); + git_config(git_default_config, NULL); for (i = 0; i < cnt; i++) { read_cache(); + if (name) { + int pos; + + refresh_index(&the_index, REFRESH_QUIET, + NULL, NULL, NULL); + pos = index_name_pos(&the_index, name, strlen(name)); + if (pos < 0) + die("%s not in index", name); + printf("%s is%s up to date\n", name, + ce_uptodate(the_index.cache[pos]) ? "" : " not"); + write_file(name, "%d\n", i); + } discard_cache(); } return 0; diff --git a/t/helper/test-serve-v2.c b/t/helper/test-serve-v2.c new file mode 100644 index 0000000000..aee35e5aef --- /dev/null +++ b/t/helper/test-serve-v2.c @@ -0,0 +1,31 @@ +#include "test-tool.h" +#include "cache.h" +#include "parse-options.h" +#include "serve.h" + +static char const * const serve_usage[] = { + N_("test-tool serve-v2 [<options>]"), + NULL +}; + +int cmd__serve_v2(int argc, const char **argv) +{ + struct serve_options opts = SERVE_OPTIONS_INIT; + + struct option options[] = { + OPT_BOOL(0, "stateless-rpc", &opts.stateless_rpc, + N_("quit after a single request/response exchange")), + OPT_BOOL(0, "advertise-capabilities", &opts.advertise_capabilities, + N_("exit immediately after advertising capabilities")), + OPT_END() + }; + const char *prefix = setup_git_directory(); + + /* ignore all unknown cmdline switches for now */ + argc = parse_options(argc, argv, prefix, options, serve_usage, + PARSE_OPT_KEEP_DASHDASH | + PARSE_OPT_KEEP_UNKNOWN); + serve(&opts); + + return 0; +} diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c index 50c55f8b1a..ce7e89028c 100644 --- a/t/helper/test-tool.c +++ b/t/helper/test-tool.c @@ -1,5 +1,12 @@ #include "git-compat-util.h" #include "test-tool.h" +#include "trace2.h" +#include "parse-options.h" + +static const char * const test_tool_usage[] = { + "test-tool [-C <directory>] <command [<arguments>...]]", + NULL +}; struct test_cmd { const char *name; @@ -12,6 +19,7 @@ static struct test_cmd cmds[] = { { "ctype", cmd__ctype }, { "date", cmd__date }, { "delta", cmd__delta }, + { "dir-iterator", cmd__dir_iterator }, { "drop-caches", cmd__drop_caches }, { "dump-cache-tree", cmd__dump_cache_tree }, { "dump-fsmonitor", cmd__dump_fsmonitor }, @@ -19,6 +27,7 @@ static struct test_cmd cmds[] = { { "dump-untracked-cache", cmd__dump_untracked_cache }, { "example-decorate", cmd__example_decorate }, { "genrandom", cmd__genrandom }, + { "genzeros", cmd__genzeros }, { "hashmap", cmd__hashmap }, { "hash-speed", cmd__hash_speed }, { "index-version", cmd__index_version }, @@ -27,6 +36,7 @@ static struct test_cmd cmds[] = { { "match-trees", cmd__match_trees }, { "mergesort", cmd__mergesort }, { "mktemp", cmd__mktemp }, + { "oidmap", cmd__oidmap }, { "online-cpus", cmd__online_cpus }, { "parse-options", cmd__parse_options }, { "path-utils", cmd__path_utils }, @@ -41,6 +51,7 @@ static struct test_cmd cmds[] = { { "revision-walking", cmd__revision_walking }, { "run-command", cmd__run_command }, { "scrap-cache-tree", cmd__scrap_cache_tree }, + { "serve-v2", cmd__serve_v2 }, { "sha1", cmd__sha1 }, { "sha1-array", cmd__sha1_array }, { "sha256", cmd__sha256 }, @@ -50,6 +61,7 @@ static struct test_cmd cmds[] = { { "submodule-config", cmd__submodule_config }, { "submodule-nested-repo-config", cmd__submodule_nested_repo_config }, { "subprocess", cmd__subprocess }, + { "trace2", cmd__trace2 }, { "urlmatch-normalization", cmd__urlmatch_normalization }, { "xml-encode", cmd__xml_encode }, { "wildmatch", cmd__wildmatch }, @@ -72,15 +84,30 @@ static NORETURN void die_usage(void) int cmd_main(int argc, const char **argv) { int i; + const char *working_directory = NULL; + struct option options[] = { + OPT_STRING('C', NULL, &working_directory, "directory", + "change the working directory"), + OPT_END() + }; BUG_exit_code = 99; + argc = parse_options(argc, argv, NULL, options, test_tool_usage, + PARSE_OPT_STOP_AT_NON_OPTION | + PARSE_OPT_KEEP_ARGV0); + if (argc < 2) die_usage(); + if (working_directory && chdir(working_directory) < 0) + die("Could not cd to '%s'", working_directory); + for (i = 0; i < ARRAY_SIZE(cmds); i++) { if (!strcmp(cmds[i].name, argv[1])) { argv++; argc--; + trace2_cmd_name(cmds[i].name); + trace2_cmd_list_config(); return cmds[i].fn(argc, argv); } } diff --git a/t/helper/test-tool.h b/t/helper/test-tool.h index a563df49bf..f805bb39ae 100644 --- a/t/helper/test-tool.h +++ b/t/helper/test-tool.h @@ -9,6 +9,7 @@ int cmd__config(int argc, const char **argv); int cmd__ctype(int argc, const char **argv); int cmd__date(int argc, const char **argv); int cmd__delta(int argc, const char **argv); +int cmd__dir_iterator(int argc, const char **argv); int cmd__drop_caches(int argc, const char **argv); int cmd__dump_cache_tree(int argc, const char **argv); int cmd__dump_fsmonitor(int argc, const char **argv); @@ -16,6 +17,7 @@ int cmd__dump_split_index(int argc, const char **argv); int cmd__dump_untracked_cache(int argc, const char **argv); int cmd__example_decorate(int argc, const char **argv); int cmd__genrandom(int argc, const char **argv); +int cmd__genzeros(int argc, const char **argv); int cmd__hashmap(int argc, const char **argv); int cmd__hash_speed(int argc, const char **argv); int cmd__index_version(int argc, const char **argv); @@ -24,6 +26,7 @@ int cmd__lazy_init_name_hash(int argc, const char **argv); int cmd__match_trees(int argc, const char **argv); int cmd__mergesort(int argc, const char **argv); int cmd__mktemp(int argc, const char **argv); +int cmd__oidmap(int argc, const char **argv); int cmd__online_cpus(int argc, const char **argv); int cmd__parse_options(int argc, const char **argv); int cmd__path_utils(int argc, const char **argv); @@ -38,6 +41,7 @@ int cmd__repository(int argc, const char **argv); int cmd__revision_walking(int argc, const char **argv); int cmd__run_command(int argc, const char **argv); int cmd__scrap_cache_tree(int argc, const char **argv); +int cmd__serve_v2(int argc, const char **argv); int cmd__sha1(int argc, const char **argv); int cmd__sha1_array(int argc, const char **argv); int cmd__sha256(int argc, const char **argv); @@ -47,6 +51,7 @@ int cmd__string_list(int argc, const char **argv); int cmd__submodule_config(int argc, const char **argv); int cmd__submodule_nested_repo_config(int argc, const char **argv); int cmd__subprocess(int argc, const char **argv); +int cmd__trace2(int argc, const char **argv); int cmd__urlmatch_normalization(int argc, const char **argv); int cmd__xml_encode(int argc, const char **argv); int cmd__wildmatch(int argc, const char **argv); diff --git a/t/helper/test-trace2.c b/t/helper/test-trace2.c new file mode 100644 index 0000000000..197819c872 --- /dev/null +++ b/t/helper/test-trace2.c @@ -0,0 +1,273 @@ +#include "test-tool.h" +#include "cache.h" +#include "argv-array.h" +#include "run-command.h" +#include "exec-cmd.h" +#include "config.h" + +typedef int(fn_unit_test)(int argc, const char **argv); + +struct unit_test { + fn_unit_test *ut_fn; + const char *ut_name; + const char *ut_usage; +}; + +#define MyOk 0 +#define MyError 1 + +static int get_i(int *p_value, const char *data) +{ + char *endptr; + + if (!data || !*data) + return MyError; + + *p_value = strtol(data, &endptr, 10); + if (*endptr || errno == ERANGE) + return MyError; + + return MyOk; +} + +/* + * Cause process to exit with the requested value via "return". + * + * Rely on test-tool.c:cmd_main() to call trace2_cmd_exit() + * with our result. + * + * Test harness can confirm: + * [] the process-exit value. + * [] the "code" field in the "exit" trace2 event. + * [] the "code" field in the "atexit" trace2 event. + * [] the "name" field in the "cmd_name" trace2 event. + * [] "def_param" events for all of the "interesting" pre-defined + * config settings. + */ +static int ut_001return(int argc, const char **argv) +{ + int rc; + + if (get_i(&rc, argv[0])) + die("expect <exit_code>"); + + return rc; +} + +/* + * Cause the process to exit with the requested value via "exit()". + * + * Test harness can confirm: + * [] the "code" field in the "exit" trace2 event. + * [] the "code" field in the "atexit" trace2 event. + * [] the "name" field in the "cmd_name" trace2 event. + * [] "def_param" events for all of the "interesting" pre-defined + * config settings. + */ +static int ut_002exit(int argc, const char **argv) +{ + int rc; + + if (get_i(&rc, argv[0])) + die("expect <exit_code>"); + + exit(rc); +} + +/* + * Send an "error" event with each value in argv. Normally, git only issues + * a single "error" event immediately before issuing an "exit" event (such + * as in die() or BUG()), but multiple "error" events are allowed. + * + * Test harness can confirm: + * [] a trace2 "error" event for each value in argv. + * [] the "name" field in the "cmd_name" trace2 event. + * [] (optional) the file:line in the "exit" event refers to this function. + */ +static int ut_003error(int argc, const char **argv) +{ + int k; + + if (!argv[0] || !*argv[0]) + die("expect <error_message>"); + + for (k = 0; k < argc; k++) + error("%s", argv[k]); + + return 0; +} + +/* + * Run a child process and wait for it to finish and exit with its return code. + * test-tool trace2 004child [<child-command-line>] + * + * For example: + * test-tool trace2 004child git version + * test-tool trace2 004child test-tool trace2 001return 0 + * test-tool trace2 004child test-tool trace2 004child test-tool trace2 004child + * test-tool trace2 004child git -c alias.xyz=version xyz + * + * Test harness can confirm: + * [] the "name" field in the "cmd_name" trace2 event. + * [] that the outer process has a single component SID (or depth "d0" in + * the PERF stream). + * [] that "child_start" and "child_exit" events are generated for the child. + * [] if the child process is an instrumented executable: + * [] that "version", "start", ..., "exit", and "atexit" events are + * generated by the child process. + * [] that the child process events have a multiple component SID (or + * depth "dN+1" in the PERF stream). + * [] that the child exit code is propagated to the parent process "exit" + * and "atexit" events.. + * [] (optional) that the "t_abs" field in the child process "atexit" event + * is less than the "t_rel" field in the "child_exit" event of the parent + * process. + * [] if the child process is like the alias example above, + * [] (optional) the child process attempts to run "git-xyx" as a dashed + * command. + * [] the child process emits an "alias" event with "xyz" => "version" + * [] the child process runs "git version" as a child process. + * [] the child process has a 3 component SID (or depth "d2" in the PERF + * stream). + */ +static int ut_004child(int argc, const char **argv) +{ + int result; + + /* + * Allow empty <child_command_line> so we can do arbitrarily deep + * command nesting and let the last one be null. + */ + if (!argc) + return 0; + + result = run_command_v_opt(argv, 0); + exit(result); +} + +/* + * Exec a git command. This may either create a child process (Windows) + * or replace the existing process. + * test-tool trace2 005exec <git_command_args> + * + * For example: + * test-tool trace2 005exec version + * + * Test harness can confirm (on Windows): + * [] the "name" field in the "cmd_name" trace2 event. + * [] that the outer process has a single component SID (or depth "d0" in + * the PERF stream). + * [] that "exec" and "exec_result" events are generated for the child + * process (since the Windows compatibility layer fakes an exec() with + * a CreateProcess(), WaitForSingleObject(), and exit()). + * [] that the child process has multiple component SID (or depth "dN+1" + * in the PERF stream). + * + * Test harness can confirm (on platforms with a real exec() function): + * [] TODO talk about process replacement and how it affects SID. + */ +static int ut_005exec(int argc, const char **argv) +{ + int result; + + if (!argc) + return 0; + + result = execv_git_cmd(argv); + return result; +} + +static int ut_006data(int argc, const char **argv) +{ + const char *usage_error = + "expect <cat0> <k0> <v0> [<cat1> <k1> <v1> [...]]"; + + if (argc % 3 != 0) + die("%s", usage_error); + + while (argc) { + if (!argv[0] || !*argv[0] || !argv[1] || !*argv[1] || + !argv[2] || !*argv[2]) + die("%s", usage_error); + + trace2_data_string(argv[0], the_repository, argv[1], argv[2]); + argv += 3; + argc -= 3; + } + + return 0; +} + +/* + * Usage: + * test-tool trace2 <ut_name_1> <ut_usage_1> + * test-tool trace2 <ut_name_2> <ut_usage_2> + * ... + */ +#define USAGE_PREFIX "test-tool trace2" + +/* clang-format off */ +static struct unit_test ut_table[] = { + { ut_001return, "001return", "<exit_code>" }, + { ut_002exit, "002exit", "<exit_code>" }, + { ut_003error, "003error", "<error_message>+" }, + { ut_004child, "004child", "[<child_command_line>]" }, + { ut_005exec, "005exec", "<git_command_args>" }, + { ut_006data, "006data", "[<category> <key> <value>]+" }, +}; +/* clang-format on */ + +/* clang-format off */ +#define for_each_ut(k, ut_k) \ + for (k = 0, ut_k = &ut_table[k]; \ + k < ARRAY_SIZE(ut_table); \ + k++, ut_k = &ut_table[k]) +/* clang-format on */ + +static int print_usage(void) +{ + int k; + struct unit_test *ut_k; + + fprintf(stderr, "usage:\n"); + for_each_ut (k, ut_k) + fprintf(stderr, "\t%s %s %s\n", USAGE_PREFIX, ut_k->ut_name, + ut_k->ut_usage); + + return 129; +} + +/* + * Issue various trace2 events for testing. + * + * We assume that these trace2 routines has already been called: + * [] trace2_initialize() [common-main.c:main()] + * [] trace2_cmd_start() [common-main.c:main()] + * [] trace2_cmd_name() [test-tool.c:cmd_main()] + * [] tracd2_cmd_list_config() [test-tool.c:cmd_main()] + * So that: + * [] the various trace2 streams are open. + * [] the process SID has been created. + * [] the "version" event has been generated. + * [] the "start" event has been generated. + * [] the "cmd_name" event has been generated. + * [] this writes various "def_param" events for interesting config values. + * + * We further assume that if we return (rather than exit()), trace2_cmd_exit() + * will be called by test-tool.c:cmd_main(). + */ +int cmd__trace2(int argc, const char **argv) +{ + int k; + struct unit_test *ut_k; + + argc--; /* skip over "trace2" arg */ + argv++; + + if (argc) + for_each_ut (k, ut_k) + if (!strcmp(argv[0], ut_k->ut_name)) + return ut_k->ut_fn(argc - 1, argv + 1); + + return print_usage(); +} diff --git a/t/interop/i5500-git-daemon.sh b/t/interop/i5500-git-daemon.sh index 1daf69420b..4d22e42f84 100755 --- a/t/interop/i5500-git-daemon.sh +++ b/t/interop/i5500-git-daemon.sh @@ -37,5 +37,4 @@ test_expect_success "fetch with $VERSION_B" ' test_cmp expect actual ' -stop_git_daemon test_done diff --git a/t/lib-git-daemon.sh b/t/lib-git-daemon.sh index 79db3b7ae5..fb8f887080 100644 --- a/t/lib-git-daemon.sh +++ b/t/lib-git-daemon.sh @@ -13,11 +13,9 @@ # # test_expect_success ... # -# stop_git_daemon # test_done -test_tristate GIT_TEST_GIT_DAEMON -if test "$GIT_TEST_GIT_DAEMON" = false +if ! git env--helper --type=bool --default=true --exit-code GIT_TEST_GIT_DAEMON then skip_all="git-daemon testing disabled (unset GIT_TEST_GIT_DAEMON to enable)" test_done @@ -25,16 +23,18 @@ fi if test_have_prereq !PIPE then - test_skip_or_die $GIT_TEST_GIT_DAEMON "file system does not support FIFOs" + test_skip_or_die GIT_TEST_GIT_DAEMON "file system does not support FIFOs" fi test_set_port LIB_GIT_DAEMON_PORT GIT_DAEMON_PID= +GIT_DAEMON_PIDFILE="$PWD"/daemon.pid GIT_DAEMON_DOCUMENT_ROOT_PATH="$PWD"/repo GIT_DAEMON_HOST_PORT=127.0.0.1:$LIB_GIT_DAEMON_PORT GIT_DAEMON_URL=git://$GIT_DAEMON_HOST_PORT +registered_stop_git_daemon_atexit_handler= start_git_daemon() { if test -n "$GIT_DAEMON_PID" then @@ -43,13 +43,19 @@ start_git_daemon() { mkdir -p "$GIT_DAEMON_DOCUMENT_ROOT_PATH" - trap 'code=$?; stop_git_daemon; (exit $code); die' EXIT + # One of the test scripts stops and then re-starts 'git daemon'. + # Don't register and then run the same atexit handlers several times. + if test -z "$registered_stop_git_daemon_atexit_handler" + then + test_atexit 'stop_git_daemon' + registered_stop_git_daemon_atexit_handler=AlreadyDone + fi say >&3 "Starting git daemon ..." mkfifo git_daemon_output ${LIB_GIT_DAEMON_COMMAND:-git daemon} \ --listen=127.0.0.1 --port="$LIB_GIT_DAEMON_PORT" \ - --reuseaddr --verbose \ + --reuseaddr --verbose --pid-file="$GIT_DAEMON_PIDFILE" \ --base-path="$GIT_DAEMON_DOCUMENT_ROOT_PATH" \ "$@" "$GIT_DAEMON_DOCUMENT_ROOT_PATH" \ >&3 2>git_daemon_output & @@ -65,8 +71,8 @@ start_git_daemon() { then kill "$GIT_DAEMON_PID" wait "$GIT_DAEMON_PID" - trap 'die' EXIT - test_skip_or_die $GIT_TEST_GIT_DAEMON \ + unset GIT_DAEMON_PID + test_skip_or_die GIT_TEST_GIT_DAEMON \ "git daemon failed to start" fi } @@ -77,8 +83,6 @@ stop_git_daemon() { return fi - trap 'die' EXIT - # kill git-daemon child of git say >&3 "Stopping git daemon ..." kill "$GIT_DAEMON_PID" @@ -88,8 +92,9 @@ stop_git_daemon() { then error "git daemon exited with status: $ret" fi + kill "$(cat "$GIT_DAEMON_PIDFILE")" 2>/dev/null GIT_DAEMON_PID= - rm -f git_daemon_output + rm -f git_daemon_output "$GIT_DAEMON_PIDFILE" } # A stripped-down version of a netcat client, that connects to a "host:port" diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh index b3be3ba011..547b9f88e1 100644 --- a/t/lib-git-p4.sh +++ b/t/lib-git-p4.sh @@ -44,15 +44,6 @@ native_path () { echo "$path" } -# On Solaris the 'date +%s' function is not supported and therefore we -# need this replacement. -# Attention: This function is not safe again against time offset updates -# at runtime (e.g. via NTP). The 'clock_gettime(CLOCK_MONOTONIC)' -# function could fix that but it is not in Python until 3.3. -time_in_seconds () { - (cd / && "$PYTHON_PATH" -c 'import time; print(int(time.time()))') -} - test_set_port P4DPORT P4PORT=localhost:$P4DPORT @@ -67,14 +58,9 @@ cli="$TRASH_DIRECTORY/cli" git="$TRASH_DIRECTORY/git" pidfile="$TRASH_DIRECTORY/p4d.pid" -# Sometimes "prove" seems to hang on exit because p4d is still running -cleanup () { - if test -f "$pidfile" - then - kill -9 $(cat "$pidfile") 2>/dev/null && exit 255 - fi +stop_p4d_and_watchdog () { + kill -9 $p4d_pid $watchdog_pid } -trap cleanup EXIT # git p4 submit generates a temp file, which will # not get cleaned up if the submission fails. Don't @@ -82,7 +68,16 @@ trap cleanup EXIT TMPDIR="$TRASH_DIRECTORY" export TMPDIR +registered_stop_p4d_atexit_handler= start_p4d () { + # One of the test scripts stops and then re-starts p4d. + # Don't register and then run the same atexit handlers several times. + if test -z "$registered_stop_p4d_atexit_handler" + then + test_atexit 'stop_p4d_and_watchdog' + registered_stop_p4d_atexit_handler=AlreadyDone + fi + mkdir -p "$db" "$cli" "$git" && rm -f "$pidfile" && ( @@ -92,6 +87,7 @@ start_p4d () { echo $! >"$pidfile" } ) && + p4d_pid=$(cat "$pidfile") # This gives p4d a long time to start up, as it can be # quite slow depending on the machine. Set this environment @@ -99,18 +95,18 @@ start_p4d () { # an automated test setup. If the p4d process dies, that # will be caught with the "kill -0" check below. i=${P4D_START_PATIENCE:-300} - pid=$(cat "$pidfile") - timeout=$(($(time_in_seconds) + $P4D_TIMEOUT)) + nr_tries_left=$P4D_TIMEOUT while true do - if test $(time_in_seconds) -gt $timeout + if test $nr_tries_left -eq 0 then - kill -9 $pid + kill -9 $p4d_pid exit 1 fi sleep 1 - done & + nr_tries_left=$(($nr_tries_left - 1)) + done 2>/dev/null 4>&2 & watchdog_pid=$! ready= @@ -123,7 +119,7 @@ start_p4d () { break fi # fail if p4d died - kill -0 $pid 2>/dev/null || break + kill -0 $p4d_pid 2>/dev/null || break echo waiting for p4d to start sleep 1 i=$(( $i - 1 )) @@ -163,29 +159,18 @@ p4_add_job () { } retry_until_success () { - timeout=$(($(time_in_seconds) + $RETRY_TIMEOUT)) - until "$@" 2>/dev/null || test $(time_in_seconds) -gt $timeout - do - sleep 1 - done -} - -retry_until_fail () { - timeout=$(($(time_in_seconds) + $RETRY_TIMEOUT)) - until ! "$@" 2>/dev/null || test $(time_in_seconds) -gt $timeout + nr_tries_left=$RETRY_TIMEOUT + until "$@" 2>/dev/null || test $nr_tries_left -eq 0 do sleep 1 + nr_tries_left=$(($nr_tries_left - 1)) done } -kill_p4d () { - pid=$(cat "$pidfile") - retry_until_fail kill $pid - retry_until_fail kill -9 $pid - # complain if it would not die - test_must_fail kill $pid >/dev/null 2>&1 && - rm -rf "$db" "$cli" "$pidfile" && - retry_until_fail kill -9 $watchdog_pid +stop_and_cleanup_p4d () { + kill -9 $p4d_pid $watchdog_pid + wait $p4d_pid + rm -rf "$db" "$cli" "$pidfile" } cleanup_git () { diff --git a/t/lib-git-svn.sh b/t/lib-git-svn.sh index f3b478c307..bc0b9c71f8 100644 --- a/t/lib-git-svn.sh +++ b/t/lib-git-svn.sh @@ -69,19 +69,12 @@ svn_cmd () { maybe_start_httpd () { loc=${1-svn} - test_tristate GIT_SVN_TEST_HTTPD - case $GIT_SVN_TEST_HTTPD in - true) + if git env--helper --type=bool --default=false --exit-code GIT_TEST_SVN_HTTPD + then . "$TEST_DIRECTORY"/lib-httpd.sh LIB_HTTPD_SVN="$loc" start_httpd - ;; - *) - stop_httpd () { - : noop - } - ;; - esac + fi } convert_to_rev_db () { @@ -111,8 +104,7 @@ EOF } require_svnserve () { - test_tristate GIT_TEST_SVNSERVE - if ! test "$GIT_TEST_SVNSERVE" = true + if ! git env--helper --type=bool --default=false --exit-code GIT_TEST_SVNSERVE then skip_all='skipping svnserve test. (set $GIT_TEST_SVNSERVE to enable)' test_done diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index f1277bef4f..8d28652b72 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -63,8 +63,7 @@ then cut -d" " -f4 | tr -d '\n' >"${GNUPGHOME}/trustlist.txt" && - echo " S relax" >> ${GNUPGHOME}/trustlist.txt && - (gpgconf --kill gpg-agent >/dev/null 2>&1 || : ) && + echo " S relax" >>"${GNUPGHOME}/trustlist.txt" && echo hello | gpgsm --homedir "${GNUPGHOME}" >/dev/null \ -u committer@example.com -o /dev/null --sign - 2>&1 && test_set_prereq GPGSM diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index e465116ef9..0d985758c6 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -14,7 +14,6 @@ # # test_expect_success ... # -# stop_httpd # test_done # # Can be configured using the following variables. @@ -42,15 +41,14 @@ then test_done fi -test_tristate GIT_TEST_HTTPD -if test "$GIT_TEST_HTTPD" = false +if ! git env--helper --type=bool --default=true --exit-code GIT_TEST_HTTPD then skip_all="Network testing disabled (unset GIT_TEST_HTTPD to enable)" test_done fi if ! test_have_prereq NOT_ROOT; then - test_skip_or_die $GIT_TEST_HTTPD \ + test_skip_or_die GIT_TEST_HTTPD \ "Cannot run httpd tests as root" fi @@ -91,11 +89,12 @@ HTTPD_DOCUMENT_ROOT_PATH=$HTTPD_ROOT_PATH/www # hack to suppress apache PassEnv warnings GIT_VALGRIND=$GIT_VALGRIND; export GIT_VALGRIND GIT_VALGRIND_OPTIONS=$GIT_VALGRIND_OPTIONS; export GIT_VALGRIND_OPTIONS +GIT_TEST_SIDEBAND_ALL=$GIT_TEST_SIDEBAND_ALL; export GIT_TEST_SIDEBAND_ALL GIT_TRACE=$GIT_TRACE; export GIT_TRACE if ! test -x "$LIB_HTTPD_PATH" then - test_skip_or_die $GIT_TEST_HTTPD "no web server found at '$LIB_HTTPD_PATH'" + test_skip_or_die GIT_TEST_HTTPD "no web server found at '$LIB_HTTPD_PATH'" fi HTTPD_VERSION=$($LIB_HTTPD_PATH -v | \ @@ -107,19 +106,19 @@ then then if ! test $HTTPD_VERSION -ge 2 then - test_skip_or_die $GIT_TEST_HTTPD \ + test_skip_or_die GIT_TEST_HTTPD \ "at least Apache version 2 is required" fi if ! test -d "$DEFAULT_HTTPD_MODULE_PATH" then - test_skip_or_die $GIT_TEST_HTTPD \ + test_skip_or_die GIT_TEST_HTTPD \ "Apache module directory not found" fi LIB_HTTPD_MODULE_PATH="$DEFAULT_HTTPD_MODULE_PATH" fi else - test_skip_or_die $GIT_TEST_HTTPD \ + test_skip_or_die GIT_TEST_HTTPD \ "Could not identify web server at '$LIB_HTTPD_PATH'" fi @@ -131,6 +130,7 @@ prepare_httpd() { mkdir -p "$HTTPD_DOCUMENT_ROOT_PATH" cp "$TEST_PATH"/passwd "$HTTPD_ROOT_PATH" install_script broken-smart-http.sh + install_script error-smart-http.sh install_script error.sh install_script apply-one-time-sed.sh @@ -174,7 +174,7 @@ prepare_httpd() { start_httpd() { prepare_httpd >&3 2>&4 - trap 'code=$?; stop_httpd; (exit $code); die' EXIT + test_atexit stop_httpd "$LIB_HTTPD_PATH" -d "$HTTPD_ROOT_PATH" \ -f "$TEST_PATH/apache.conf" $HTTPD_PARA \ @@ -182,15 +182,12 @@ start_httpd() { >&3 2>&4 if test $? -ne 0 then - trap 'die' EXIT cat "$HTTPD_ROOT_PATH"/error.log >&4 2>/dev/null - test_skip_or_die $GIT_TEST_HTTPD "web server setup failed" + test_skip_or_die GIT_TEST_HTTPD "web server setup failed" fi } stop_httpd() { - trap 'die' EXIT - "$LIB_HTTPD_PATH" -d "$HTTPD_ROOT_PATH" \ -f "$TEST_PATH/apache.conf" $HTTPD_PARA -k stop } diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 5d63ed90c5..5c1c86c193 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -76,6 +76,7 @@ PassEnv GIT_VALGRIND PassEnv GIT_VALGRIND_OPTIONS PassEnv GNUPGHOME PassEnv ASAN_OPTIONS +PassEnv LSAN_OPTIONS PassEnv GIT_TRACE PassEnv GIT_CONFIG_NOSYSTEM PassEnv GIT_TEST_SIDEBAND_ALL @@ -119,6 +120,7 @@ Alias /auth/dumb/ www/auth/dumb/ ScriptAliasMatch /error_git_upload_pack/(.*)/git-upload-pack error.sh/ ScriptAliasMatch /smart_*[^/]*/(.*) ${GIT_EXEC_PATH}/git-http-backend/$1 ScriptAlias /broken_smart/ broken-smart-http.sh/ +ScriptAlias /error_smart/ error-smart-http.sh/ ScriptAlias /error/ error.sh/ ScriptAliasMatch /one_time_sed/(.*) apply-one-time-sed.sh/$1 <Directory ${GIT_EXEC_PATH}> @@ -127,6 +129,9 @@ ScriptAliasMatch /one_time_sed/(.*) apply-one-time-sed.sh/$1 <Files broken-smart-http.sh> Options ExecCGI </Files> +<Files error-smart-http.sh> + Options ExecCGI +</Files> <Files error.sh> Options ExecCGI </Files> diff --git a/t/lib-httpd/error-smart-http.sh b/t/lib-httpd/error-smart-http.sh new file mode 100644 index 0000000000..e65d447fc4 --- /dev/null +++ b/t/lib-httpd/error-smart-http.sh @@ -0,0 +1,3 @@ +echo "Content-Type: application/x-git-upload-pack-advertisement" +echo +printf "%s" "0019ERR server-side error" diff --git a/t/lib-patch-mode.sh b/t/lib-patch-mode.sh index 06c3c91762..cfd76bf987 100644 --- a/t/lib-patch-mode.sh +++ b/t/lib-patch-mode.sh @@ -2,28 +2,40 @@ . ./test-lib.sh +# set_state <path> <worktree-content> <index-content> +# +# Prepare the content for path in worktree and the index as specified. set_state () { echo "$3" > "$1" && git add "$1" && echo "$2" > "$1" } +# save_state <path> +# +# Save index/worktree content of <path> in the files _worktree_<path> +# and _index_<path> save_state () { noslash="$(echo "$1" | tr / _)" && cat "$1" > _worktree_"$noslash" && git show :"$1" > _index_"$noslash" } +# set_and_save_state <path> <worktree-content> <index-content> set_and_save_state () { set_state "$@" && save_state "$1" } +# verify_state <path> <expected-worktree-content> <expected-index-content> verify_state () { test "$(cat "$1")" = "$2" && test "$(git show :"$1")" = "$3" } +# verify_saved_state <path> +# +# Call verify_state with expected contents from the last save_state verify_saved_state () { noslash="$(echo "$1" | tr / _)" && verify_state "$1" "$(cat _worktree_"$noslash")" "$(cat _index_"$noslash")" diff --git a/t/lib-rebase.sh b/t/lib-rebase.sh index 7ea30e5006..6d87961e41 100644 --- a/t/lib-rebase.sh +++ b/t/lib-rebase.sh @@ -44,10 +44,10 @@ set_fake_editor () { rm -f "$1" echo 'rebase -i script before editing:' cat "$1".tmp - action=pick + action=\& for line in $FAKE_LINES; do case $line in - pick|p|squash|s|fixup|f|edit|e|reword|r|drop|d) + pick|p|squash|s|fixup|f|edit|e|reword|r|drop|d|label|l|reset|r|merge|m) action="$line";; exec_*|x_*|break|b) echo "$line" | sed 's/_/ /g' >> "$1";; @@ -58,11 +58,12 @@ set_fake_editor () { bad) action="badcmd";; fakesha) + test \& != "$action" || action=pick echo "$action XXXXXXX False commit" >> "$1" action=pick;; *) - sed -n "${line}s/^pick/$action/p" < "$1".tmp >> "$1" - action=pick;; + sed -n "${line}s/^[a-z][a-z]*/$action/p" < "$1".tmp >> "$1" + action=\&;; esac done echo 'rebase -i script after editing:' diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index 5b56b23166..1dd17fc03e 100755 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -139,7 +139,7 @@ create_lib_submodule_repo () { git revert HEAD && git checkout -b invalid_sub1 add_sub1 && - git update-index --cacheinfo 160000 0123456789012345678901234567890123456789 sub1 && + git update-index --cacheinfo 160000 $(test_oid numeric) sub1 && git commit -m "Invalid sub1 commit" && git checkout -b valid_sub1 && git revert HEAD && @@ -196,6 +196,7 @@ test_git_directory_exists() { # the submodule repo if it doesn't exist and configures the most problematic # settings for diff.ignoreSubmodules. prolog () { + test_oid_init && (test -d submodule_update_repo || create_lib_submodule_repo) && test_config_global diff.ignoreSubmodules all && test_config diff.ignoreSubmodules all diff --git a/t/perf/README b/t/perf/README index be12090c38..c7b70e2d28 100644 --- a/t/perf/README +++ b/t/perf/README @@ -45,7 +45,7 @@ call the aggregation script to summarize the results: $ ./p0001-rev-list.sh [...] - $ GIT_BUILD_DIR=/path/to/other/git ./p0001-rev-list.sh + $ ./run /path/to/other/git -- ./p0001-rev-list.sh [...] $ ./aggregate.perl . /path/to/other/git ./p0001-rev-list.sh diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index 494907a892..66554d2161 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -3,9 +3,9 @@ use lib '../../perl/build/lib'; use strict; use warnings; -use JSON; use Getopt::Long; use Git; +use Cwd qw(realpath); sub get_times { my $name = shift; @@ -99,18 +99,21 @@ usage() unless $rc; while (scalar @ARGV) { my $arg = $ARGV[0]; my $dir; + my $prefix = ''; last if -f $arg or $arg eq "--"; if (! -d $arg) { my $rev = Git::command_oneline(qw(rev-parse --verify), $arg); $dir = "build/".$rev; + } elsif ($arg eq '.') { + $dir = '.'; } else { - $arg =~ s{/*$}{}; - $dir = $arg; - $dirabbrevs{$dir} = $dir; + $dir = realpath($arg); + $dirnames{$dir} = $dir; + $prefix .= 'bindir'; } push @dirs, $dir; - $dirnames{$dir} = $arg; - my $prefix = $dir; + $dirnames{$dir} ||= $arg; + $prefix .= $dir; $prefix =~ tr/^a-zA-Z0-9/_/c; $prefixes{$dir} = $prefix . '.'; shift @ARGV; @@ -312,9 +315,6 @@ sub print_codespeed_results { $environment = $reponame; } elsif (exists $ENV{GIT_PERF_REPO_NAME} and $ENV{GIT_PERF_REPO_NAME} ne "") { $environment = $ENV{GIT_PERF_REPO_NAME}; - } elsif (exists $ENV{GIT_TEST_INSTALLED} and $ENV{GIT_TEST_INSTALLED} ne "") { - $environment = $ENV{GIT_TEST_INSTALLED}; - $environment =~ s|/bin-wrappers$||; } else { $environment = `uname -r`; chomp $environment; @@ -342,7 +342,8 @@ sub print_codespeed_results { } } - print to_json(\@data, {utf8 => 1, pretty => 1, canonical => 1}), "\n"; + require JSON; + print JSON::to_json(\@data, {utf8 => 1, pretty => 1, canonical => 1}), "\n"; } binmode STDOUT, ":utf8" or die "PANIC on binmode: $!"; diff --git a/t/perf/p0001-rev-list.sh b/t/perf/p0001-rev-list.sh index ebf172401b..3042a85666 100755 --- a/t/perf/p0001-rev-list.sh +++ b/t/perf/p0001-rev-list.sh @@ -14,6 +14,24 @@ test_perf 'rev-list --all --objects' ' git rev-list --all --objects >/dev/null ' +test_perf 'rev-list --parents' ' + git rev-list --parents HEAD >/dev/null +' + +test_expect_success 'create dummy file' ' + echo unlikely-to-already-be-there >dummy && + git add dummy && + git commit -m dummy +' + +test_perf 'rev-list -- dummy' ' + git rev-list HEAD -- dummy +' + +test_perf 'rev-list --parents -- dummy' ' + git rev-list --parents HEAD -- dummy +' + test_expect_success 'create new unreferenced commit' ' commit=$(git commit-tree HEAD^{tree} -p HEAD) && test_export commit diff --git a/t/perf/p5302-pack-index.sh b/t/perf/p5302-pack-index.sh index 99bdb16c85..a9b3e112d9 100755 --- a/t/perf/p5302-pack-index.sh +++ b/t/perf/p5302-pack-index.sh @@ -13,35 +13,40 @@ test_expect_success 'repack' ' export PACK ' -test_expect_success 'create target repositories' ' - for repo in t1 t2 t3 t4 t5 t6 - do - git init --bare $repo - done -' - test_perf 'index-pack 0 threads' ' - GIT_DIR=t1 git index-pack --threads=1 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --threads=1 --stdin < $PACK ' test_perf 'index-pack 1 thread ' ' - GIT_DIR=t2 GIT_FORCE_THREADS=1 git index-pack --threads=1 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git GIT_FORCE_THREADS=1 git index-pack --threads=1 --stdin < $PACK ' test_perf 'index-pack 2 threads' ' - GIT_DIR=t3 git index-pack --threads=2 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --threads=2 --stdin < $PACK ' test_perf 'index-pack 4 threads' ' - GIT_DIR=t4 git index-pack --threads=4 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --threads=4 --stdin < $PACK ' test_perf 'index-pack 8 threads' ' - GIT_DIR=t5 git index-pack --threads=8 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --threads=8 --stdin < $PACK ' test_perf 'index-pack default number of threads' ' - GIT_DIR=t6 git index-pack --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --stdin < $PACK ' test_done diff --git a/t/perf/p5304-prune.sh b/t/perf/p5304-prune.sh new file mode 100755 index 0000000000..83baedb8a4 --- /dev/null +++ b/t/perf/p5304-prune.sh @@ -0,0 +1,35 @@ +#!/bin/sh + +test_description='performance tests of prune' +. ./perf-lib.sh + +test_perf_default_repo + +test_expect_success 'remove reachable loose objects' ' + git repack -ad +' + +test_expect_success 'remove unreachable loose objects' ' + git prune +' + +test_expect_success 'confirm there are no loose objects' ' + git count-objects | grep ^0 +' + +test_perf 'prune with no objects' ' + git prune +' + +test_expect_success 'repack with bitmaps' ' + git repack -adb +' + +# We have to create the object in each trial run, since otherwise +# runs after the first see no object and just skip the traversal entirely! +test_perf 'prune with bitmaps' ' + echo "probably not present in repo" | git hash-object -w --stdin && + git prune +' + +test_done diff --git a/t/perf/p5310-pack-bitmaps.sh b/t/perf/p5310-pack-bitmaps.sh index bb91dbb173..6a3a42531b 100755 --- a/t/perf/p5310-pack-bitmaps.sh +++ b/t/perf/p5310-pack-bitmaps.sh @@ -12,8 +12,7 @@ test_perf_large_repo # We intentionally use the deprecated pack.writebitmaps # config so that we can test against older versions of git. test_expect_success 'setup bitmap config' ' - git config pack.writebitmaps true && - git config pack.writebitmaphashcache true + git config pack.writebitmaps true ' test_perf 'repack to disk' ' diff --git a/t/perf/p5311-pack-bitmaps-fetch.sh b/t/perf/p5311-pack-bitmaps-fetch.sh index b04575951f..47c3fd7581 100755 --- a/t/perf/p5311-pack-bitmaps-fetch.sh +++ b/t/perf/p5311-pack-bitmaps-fetch.sh @@ -7,7 +7,6 @@ test_perf_default_repo test_expect_success 'create bitmapped server repo' ' git config pack.writebitmaps true && - git config pack.writebitmaphashcache true && git repack -ad ' diff --git a/t/perf/p5600-partial-clone.sh b/t/perf/p5600-partial-clone.sh new file mode 100755 index 0000000000..3e04bd2ae1 --- /dev/null +++ b/t/perf/p5600-partial-clone.sh @@ -0,0 +1,26 @@ +#!/bin/sh + +test_description='performance of partial clones' +. ./perf-lib.sh + +test_perf_default_repo + +test_expect_success 'enable server-side config' ' + git config uploadpack.allowFilter true && + git config uploadpack.allowAnySHA1InWant true +' + +test_perf 'clone without blobs' ' + rm -rf bare.git && + git clone --no-local --bare --filter=blob:none . bare.git +' + +test_perf 'checkout of result' ' + rm -rf worktree && + mkdir -p worktree/.git && + tar -C bare.git -cf - . | tar -C worktree/.git -xf - && + git -C worktree config core.bare false && + git -C worktree checkout -f +' + +test_done diff --git a/t/perf/p5601-clone-reference.sh b/t/perf/p5601-clone-reference.sh new file mode 100755 index 0000000000..68fed66347 --- /dev/null +++ b/t/perf/p5601-clone-reference.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +test_description='speed of clone --reference' +. ./perf-lib.sh + +test_perf_default_repo + +test_expect_success 'create shareable repository' ' + git clone --bare . shared.git +' + +test_expect_success 'advance base repository' ' + # Do not use test_commit here; its test_tick will + # use some ancient hard-coded date. The resulting clock + # skew will cause pack-objects to traverse in a very + # sub-optimal order, skewing the results. + echo content >new-file-that-does-not-exist && + git add new-file-that-does-not-exist && + git commit -m "new commit" +' + +test_perf 'clone --reference' ' + rm -rf dst.git && + git clone --no-local --bare --reference shared.git . dst.git +' + +test_done diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh index 2e33ab3ec3..b58a43ea43 100644 --- a/t/perf/perf-lib.sh +++ b/t/perf/perf-lib.sh @@ -17,37 +17,27 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see http://www.gnu.org/licenses/ . -# do the --tee work early; it otherwise confuses our careful -# GIT_BUILD_DIR mangling -case "$GIT_TEST_TEE_STARTED, $* " in -done,*) - # do not redirect again - ;; -*' --tee '*|*' --va'*) - mkdir -p test-results - BASE=test-results/$(basename "$0" .sh) - (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1; - echo $? > $BASE.exit) | tee $BASE.out - test "$(cat $BASE.exit)" = 0 - exit - ;; -esac - +# These variables must be set before the inclusion of test-lib.sh below, +# because it will change our working directory. TEST_DIRECTORY=$(pwd)/.. TEST_OUTPUT_DIRECTORY=$(pwd) -if test -z "$GIT_TEST_INSTALLED"; then - perf_results_prefix= -else - perf_results_prefix=$(printf "%s" "${GIT_TEST_INSTALLED%/bin-wrappers}" | tr -c "[a-zA-Z0-9]" "[_*]")"." - # make the tested dir absolute - GIT_TEST_INSTALLED=$(cd "$GIT_TEST_INSTALLED" && pwd) -fi TEST_NO_CREATE_REPO=t TEST_NO_MALLOC_CHECK=t . ../test-lib.sh +if test -n "$GIT_TEST_INSTALLED" -a -z "$PERF_SET_GIT_TEST_INSTALLED" +then + error "Do not use GIT_TEST_INSTALLED with the perf tests. + +Instead use: + + ./run <path-to-git> -- <tests> + +See t/perf/README for details." +fi + # Variables from test-lib that are normally internal to the tests; we # need to export them for test_perf subshells export TEST_DIRECTORY TRASH_DIRECTORY GIT_BUILD_DIR GIT_TEST_CMP @@ -191,7 +181,7 @@ test_wrapper_ () { base=$(basename "$0" .sh) echo "$test_count" >>"$perf_results_dir"/$base.subtests echo "$1" >"$perf_results_dir"/$base.$test_count.descr - base="$perf_results_dir"/"$perf_results_prefix$(basename "$0" .sh)"."$test_count" + base="$perf_results_dir"/"$PERF_RESULTS_PREFIX$(basename "$0" .sh)"."$test_count" "$test_wrapper_func_" "$@" fi diff --git a/t/perf/run b/t/perf/run index 9aaa733c77..c7b86104e1 100755 --- a/t/perf/run +++ b/t/perf/run @@ -70,6 +70,24 @@ build_git_rev () { ) || die "failed to build revision '$mydir'" } +set_git_test_installed () { + mydir=$1 + + mydir_abs=$(cd $mydir && pwd) + mydir_abs_wrappers="$mydir_abs_wrappers/bin-wrappers" + if test -d "$mydir_abs_wrappers" + then + GIT_TEST_INSTALLED=$mydir_abs_wrappers + else + # Older versions of git lacked bin-wrappers; + # fallback to the files in the root. + GIT_TEST_INSTALLED=$mydir_abs + fi + export GIT_TEST_INSTALLED + PERF_SET_GIT_TEST_INSTALLED=true + export PERF_SET_GIT_TEST_INSTALLED +} + run_dirs_helper () { mydir=${1%/} shift @@ -79,7 +97,16 @@ run_dirs_helper () { if test $# -gt 0 -a "$1" = --; then shift fi - if [ ! -d "$mydir" ]; then + + PERF_RESULTS_PREFIX= + if test "$mydir" = "." + then + unset GIT_TEST_INSTALLED + elif test -d "$mydir" + then + PERF_RESULTS_PREFIX=bindir$(cd $mydir && printf "%s" "$(pwd)" | tr -c "[a-zA-Z0-9]" "_"). + set_git_test_installed "$mydir" + else rev=$(git rev-parse --verify "$mydir" 2>/dev/null) || die "'$mydir' is neither a directory nor a valid revision" if [ ! -d build/$rev ]; then @@ -87,16 +114,12 @@ run_dirs_helper () { fi build_git_rev $rev "$mydir" mydir=build/$rev + + PERF_RESULTS_PREFIX=build_$rev. + set_git_test_installed "$mydir" fi - if test "$mydir" = .; then - unset GIT_TEST_INSTALLED - else - GIT_TEST_INSTALLED="$mydir/bin-wrappers" - # Older versions of git lacked bin-wrappers; fallback to the - # files in the root. - test -d "$GIT_TEST_INSTALLED" || GIT_TEST_INSTALLED=$mydir - export GIT_TEST_INSTALLED - fi + export PERF_RESULTS_PREFIX + run_one_dir "$@" } diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index b6566003dd..4c01f60dd3 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -25,16 +25,14 @@ try_local_x () { echo "$x" } -# This test is an experiment to check whether any Git users are using -# Shells that don't support the "local" keyword. "local" is not +# Check whether the shell supports the "local" keyword. "local" is not # POSIX-standard, but it is very widely supported by POSIX-compliant -# shells, and if it doesn't cause problems for people, we would like -# to be able to use it in Git code. +# shells, and we rely on it within Git's test framework. # -# For now, this is the only test that requires "local". If your shell -# fails this test, you can ignore the failure, but please report the -# problem to the Git mailing list <git@vger.kernel.org>, as it might -# convince us to continue avoiding the use of "local". +# If your shell fails this test, the results of other tests may be +# unreliable. You may wish to report the problem to the Git mailing +# list <git@vger.kernel.org>, as it could cause us to reconsider +# relying on "local". test_expect_success 'verify that the running shell supports "local"' ' x="notlocal" && echo "local" >expected1 && @@ -276,23 +274,23 @@ test_expect_success 'pretend we have a mix of all possible results' " test_expect_success C_LOCALE_OUTPUT 'test --verbose' ' test_must_fail run_sub_test_lib_test \ - test-verbose "test verbose" --verbose <<-\EOF && + t1234-verbose "test verbose" --verbose <<-\EOF && test_expect_success "passing test" true test_expect_success "test with output" "echo foo" test_expect_success "failing test" false test_done EOF - mv test-verbose/out test-verbose/out+ && - grep -v "^Initialized empty" test-verbose/out+ >test-verbose/out && - check_sub_test_lib_test test-verbose <<-\EOF - > expecting success: true + mv t1234-verbose/out t1234-verbose/out+ && + grep -v "^Initialized empty" t1234-verbose/out+ >t1234-verbose/out && + check_sub_test_lib_test t1234-verbose <<-\EOF + > expecting success of 1234.1 '\''passing test'\'': true > ok 1 - passing test > Z - > expecting success: echo foo + > expecting success of 1234.2 '\''test with output'\'': echo foo > foo > ok 2 - test with output > Z - > expecting success: false + > expecting success of 1234.3 '\''failing test'\'': false > not ok 3 - failing test > # false > Z @@ -303,17 +301,17 @@ test_expect_success C_LOCALE_OUTPUT 'test --verbose' ' test_expect_success 'test --verbose-only' ' test_must_fail run_sub_test_lib_test \ - test-verbose-only-2 "test verbose-only=2" \ + t2345-verbose-only-2 "test verbose-only=2" \ --verbose-only=2 <<-\EOF && test_expect_success "passing test" true test_expect_success "test with output" "echo foo" test_expect_success "failing test" false test_done EOF - check_sub_test_lib_test test-verbose-only-2 <<-\EOF + check_sub_test_lib_test t2345-verbose-only-2 <<-\EOF > ok 1 - passing test > Z - > expecting success: echo foo + > expecting success of 2345.2 '\''test with output'\'': echo foo > foo > ok 2 - test with output > Z @@ -726,7 +724,7 @@ donthaveit=yes test_expect_success DONTHAVEIT 'unmet prerequisite causes test to be skipped' ' donthaveit=no ' -if test $haveit$donthaveit != yesyes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a $haveit$donthaveit != yesyes then say "bug in test framework: prerequisite tags do not work reliably" exit 1 @@ -747,7 +745,7 @@ donthaveiteither=yes test_expect_success DONTHAVEIT,HAVEIT 'unmet prerequisites causes test to be skipped' ' donthaveiteither=no ' -if test $haveit$donthaveit$donthaveiteither != yesyesyes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a $haveit$donthaveit$donthaveiteither != yesyesyes then say "bug in test framework: multiple prerequisite tags do not work reliably" exit 1 @@ -763,7 +761,7 @@ test_expect_success !LAZY_TRUE 'missing lazy prereqs skip tests' ' donthavetrue=no ' -if test "$havetrue$donthavetrue" != yesyes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a "$havetrue$donthavetrue" != yesyes then say 'bug in test framework: lazy prerequisites do not work' exit 1 @@ -779,7 +777,7 @@ test_expect_success LAZY_FALSE 'missing negative lazy prereqs will skip' ' havefalse=no ' -if test "$nothavefalse$havefalse" != yesyes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a "$nothavefalse$havefalse" != yesyes then say 'bug in test framework: negative lazy prerequisites do not work' exit 1 @@ -790,7 +788,7 @@ test_expect_success 'tests clean up after themselves' ' test_when_finished clean=yes ' -if test $clean != yes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a $clean != yes then say "bug in test framework: basic cleanup command does not work reliably" exit 1 @@ -825,6 +823,24 @@ test_expect_success 'tests clean up even on failures' " EOF " +test_expect_success 'test_atexit is run' " + test_must_fail run_sub_test_lib_test \ + atexit-cleanup 'Run atexit commands' -i <<-\\EOF && + test_expect_success 'tests clean up even after a failure' ' + > ../../clean-atexit && + test_atexit rm ../../clean-atexit && + > ../../also-clean-atexit && + test_atexit rm ../../also-clean-atexit && + > ../../dont-clean-atexit && + (exit 1) + ' + test_done + EOF + test_path_is_file dont-clean-atexit && + test_path_is_missing clean-atexit && + test_path_is_missing also-clean-atexit +" + test_expect_success 'test_oid setup' ' test_oid_init ' diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 42a263cada..26f8206326 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -93,6 +93,7 @@ test_expect_success 'No extra GIT_* on alias scripts' ' sed -n \ -e "/^GIT_PREFIX=/d" \ -e "/^GIT_TEXTDOMAINDIR=/d" \ + -e "/^GIT_TRACE2_PARENT/d" \ -e "/^GIT_/s/=.*//p" | sort EOF @@ -174,7 +175,7 @@ test_expect_success 'reinit' ' test_expect_success 'init with --template' ' mkdir template-source && echo content >template-source/file && - git init --template=../template-source template-custom && + git init --template=template-source template-custom && test_cmp template-source/file template-custom/.git/file ' @@ -310,8 +311,8 @@ test_expect_success 'init prefers command line to GIT_DIR' ' test_expect_success 'init with separate gitdir' ' rm -rf newdir && git init --separate-git-dir realgitdir newdir && - echo "gitdir: $(pwd)/realgitdir" >expected && - test_cmp expected newdir/.git && + newdir_git="$(cat newdir/.git)" && + test_cmp_fspath "$(pwd)/realgitdir" "${newdir_git#gitdir: }" && test_path_is_dir realgitdir/refs ' @@ -360,12 +361,9 @@ test_expect_success 're-init on .git file' ' ' test_expect_success 're-init to update git link' ' - ( - cd newdir && - git init --separate-git-dir ../surrealgitdir - ) && - echo "gitdir: $(pwd)/surrealgitdir" >expected && - test_cmp expected newdir/.git && + git -C newdir init --separate-git-dir ../surrealgitdir && + newdir_git="$(cat newdir/.git)" && + test_cmp_fspath "$(pwd)/surrealgitdir" "${newdir_git#gitdir: }" && test_path_is_dir surrealgitdir/refs && test_path_is_missing realgitdir/refs ' @@ -373,12 +371,9 @@ test_expect_success 're-init to update git link' ' test_expect_success 're-init to move gitdir' ' rm -rf newdir realgitdir surrealgitdir && git init newdir && - ( - cd newdir && - git init --separate-git-dir ../realgitdir - ) && - echo "gitdir: $(pwd)/realgitdir" >expected && - test_cmp expected newdir/.git && + git -C newdir init --separate-git-dir ../realgitdir && + newdir_git="$(cat newdir/.git)" && + test_cmp_fspath "$(pwd)/realgitdir" "${newdir_git#gitdir: }" && test_path_is_dir realgitdir/refs ' @@ -453,6 +448,17 @@ test_expect_success 're-init from a linked worktree' ' ) ' +test_expect_success MINGW 'core.hidedotfiles = false' ' + git config --global core.hidedotfiles false && + rm -rf newdir && + mkdir newdir && + ( + sane_unset GIT_DIR GIT_WORK_TREE GIT_CONFIG && + git -C newdir init + ) && + ! is_hidden newdir/.git +' + test_expect_success MINGW 'redirect std handles' ' GIT_REDIRECT_STDOUT=output.txt git rev-parse --git-dir && test .git = "$(cat output.txt)" && @@ -461,8 +467,8 @@ test_expect_success MINGW 'redirect std handles' ' GIT_REDIRECT_STDOUT=output.txt \ GIT_REDIRECT_STDERR="2>&1" \ git rev-parse --git-dir --verify refs/invalid && - printf ".git\nfatal: Needed a single revision\n" >expect && - test_cmp expect output.txt + grep "^\\.git\$" output.txt && + grep "Needed a single revision" output.txt ' test_done diff --git a/t/t0007-git-var.sh b/t/t0007-git-var.sh index 5868a87352..1f600e2cae 100755 --- a/t/t0007-git-var.sh +++ b/t/t0007-git-var.sh @@ -17,7 +17,7 @@ test_expect_success 'get GIT_COMMITTER_IDENT' ' test_cmp expect actual ' -test_expect_success !AUTOIDENT 'requested identites are strict' ' +test_expect_success !FAIL_PREREQS,!AUTOIDENT 'requested identites are strict' ' ( sane_unset GIT_COMMITTER_NAME && sane_unset GIT_COMMITTER_EMAIL && diff --git a/t/t0011-hashmap.sh b/t/t0011-hashmap.sh index 3f1f505e89..5343ffd3f9 100755 --- a/t/t0011-hashmap.sh +++ b/t/t0011-hashmap.sh @@ -9,15 +9,6 @@ test_hashmap() { test_cmp expect actual } -test_expect_success 'hash functions' ' - -test_hashmap "hash key1" "2215982743 2215982743 116372151 116372151" && -test_hashmap "hash key2" "2215982740 2215982740 116372148 116372148" && -test_hashmap "hash fooBarFrotz" "1383912807 1383912807 3189766727 3189766727" && -test_hashmap "hash foobarfrotz" "2862305959 2862305959 3189766727 3189766727" - -' - test_expect_success 'put' ' test_hashmap "put key1 value1 @@ -179,31 +170,45 @@ NULL ' test_expect_success 'iterate' ' - -test_hashmap "put key1 value1 -put key2 value2 -put fooBarFrotz value3 -iterate" "NULL -NULL -NULL -key2 value2 -key1 value1 -fooBarFrotz value3" - + test-tool hashmap >actual.raw <<-\EOF && + put key1 value1 + put key2 value2 + put fooBarFrotz value3 + iterate + EOF + + cat >expect <<-\EOF && + NULL + NULL + NULL + fooBarFrotz value3 + key1 value1 + key2 value2 + EOF + + sort <actual.raw >actual && + test_cmp expect actual ' test_expect_success 'iterate (case insensitive)' ' - -test_hashmap "put key1 value1 -put key2 value2 -put fooBarFrotz value3 -iterate" "NULL -NULL -NULL -fooBarFrotz value3 -key2 value2 -key1 value1" ignorecase - + test-tool hashmap ignorecase >actual.raw <<-\EOF && + put key1 value1 + put key2 value2 + put fooBarFrotz value3 + iterate + EOF + + cat >expect <<-\EOF && + NULL + NULL + NULL + fooBarFrotz value3 + key1 value1 + key2 value2 + EOF + + sort <actual.raw >actual && + test_cmp expect actual ' test_expect_success 'grow / shrink' ' diff --git a/t/t0016-oidmap.sh b/t/t0016-oidmap.sh new file mode 100755 index 0000000000..31f8276ba8 --- /dev/null +++ b/t/t0016-oidmap.sh @@ -0,0 +1,110 @@ +#!/bin/sh + +test_description='test oidmap' +. ./test-lib.sh + +# This purposefully is very similar to t0011-hashmap.sh + +test_oidmap () { + echo "$1" | test-tool oidmap $3 >actual && + echo "$2" >expect && + test_cmp expect actual +} + + +test_expect_success 'setup' ' + + test_commit one && + test_commit two && + test_commit three && + test_commit four + +' + +test_expect_success 'put' ' + +test_oidmap "put one 1 +put two 2 +put invalidOid 4 +put three 3" "NULL +NULL +Unknown oid: invalidOid +NULL" + +' + +test_expect_success 'replace' ' + +test_oidmap "put one 1 +put two 2 +put three 3 +put invalidOid 4 +put two deux +put one un" "NULL +NULL +NULL +Unknown oid: invalidOid +2 +1" + +' + +test_expect_success 'get' ' + +test_oidmap "put one 1 +put two 2 +put three 3 +get two +get four +get invalidOid +get one" "NULL +NULL +NULL +2 +NULL +Unknown oid: invalidOid +1" + +' + +test_expect_success 'remove' ' + +test_oidmap "put one 1 +put two 2 +put three 3 +remove one +remove two +remove invalidOid +remove four" "NULL +NULL +NULL +1 +2 +Unknown oid: invalidOid +NULL" + +' + +test_expect_success 'iterate' ' + test-tool oidmap >actual.raw <<-\EOF && + put one 1 + put two 2 + put three 3 + iterate + EOF + + # sort "expect" too so we do not rely on the order of particular oids + sort >expect <<-EOF && + NULL + NULL + NULL + $(git rev-parse one) 1 + $(git rev-parse two) 2 + $(git rev-parse three) 3 + EOF + + sort <actual.raw >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t0017-env-helper.sh b/t/t0017-env-helper.sh new file mode 100755 index 0000000000..c1ecf6aeac --- /dev/null +++ b/t/t0017-env-helper.sh @@ -0,0 +1,99 @@ +#!/bin/sh + +test_description='test env--helper' + +. ./test-lib.sh + + +test_expect_success 'env--helper usage' ' + test_must_fail git env--helper && + test_must_fail git env--helper --type=bool && + test_must_fail git env--helper --type=ulong && + test_must_fail git env--helper --type=bool && + test_must_fail git env--helper --type=bool --default && + test_must_fail git env--helper --type=bool --default= && + test_must_fail git env--helper --defaultxyz +' + +test_expect_success 'env--helper bad default values' ' + test_must_fail git env--helper --type=bool --default=1xyz MISSING && + test_must_fail git env--helper --type=ulong --default=1xyz MISSING +' + +test_expect_success 'env--helper --type=bool' ' + # Test various --default bool values + echo true >expected && + git env--helper --type=bool --default=1 MISSING >actual && + test_cmp expected actual && + git env--helper --type=bool --default=yes MISSING >actual && + test_cmp expected actual && + git env--helper --type=bool --default=true MISSING >actual && + test_cmp expected actual && + echo false >expected && + test_must_fail git env--helper --type=bool --default=0 MISSING >actual && + test_cmp expected actual && + test_must_fail git env--helper --type=bool --default=no MISSING >actual && + test_cmp expected actual && + test_must_fail git env--helper --type=bool --default=false MISSING >actual && + test_cmp expected actual && + + # No output with --exit-code + git env--helper --type=bool --default=true --exit-code MISSING >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + test_must_fail git env--helper --type=bool --default=false --exit-code MISSING >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + + # Existing variable + EXISTS=true git env--helper --type=bool --default=false --exit-code EXISTS >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + test_must_fail \ + env EXISTS=false \ + git env--helper --type=bool --default=true --exit-code EXISTS >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err +' + +test_expect_success 'env--helper --type=ulong' ' + echo 1234567890 >expected && + git env--helper --type=ulong --default=1234567890 MISSING >actual.out 2>actual.err && + test_cmp expected actual.out && + test_must_be_empty actual.err && + + echo 0 >expected && + test_must_fail git env--helper --type=ulong --default=0 MISSING >actual && + test_cmp expected actual && + + git env--helper --type=ulong --default=1234567890 --exit-code MISSING >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + + EXISTS=1234567890 git env--helper --type=ulong --default=0 EXISTS --exit-code >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + + echo 1234567890 >expected && + EXISTS=1234567890 git env--helper --type=ulong --default=0 EXISTS >actual.out 2>actual.err && + test_cmp expected actual.out && + test_must_be_empty actual.err +' + +test_expect_success 'env--helper reads config thanks to trace2' ' + mkdir home && + git config -f home/.gitconfig include.path cycle && + git config -f home/cycle include.path .gitconfig && + + test_must_fail \ + env HOME="$(pwd)/home" GIT_TEST_GETTEXT_POISON=false \ + git config -l 2>err && + grep "exceeded maximum include depth" err && + + test_must_fail \ + env HOME="$(pwd)/home" GIT_TEST_GETTEXT_POISON=true \ + git -C cycle env--helper --type=bool --default=0 --exit-code GIT_TEST_GETTEXT_POISON 2>err && + grep "# GETTEXT POISON #" err +' + +test_done diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index e10f5f787f..c954c709ad 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -390,6 +390,9 @@ test_expect_success PERL 'required process filter should filter data' ' EOF test_cmp_exclude_clean expected.log debug.log && + # Make sure that the file appears dirty, so checkout below has to + # run the configured filter. + touch test.r && filter_git checkout --quiet --no-progress empty-branch && cat >expected.log <<-EOF && START diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh index 3587e454f1..959b6da449 100755 --- a/t/t0027-auto-crlf.sh +++ b/t/t0027-auto-crlf.sh @@ -15,8 +15,10 @@ compare_ws_file () { pfx=$1 exp=$2.expect act=$pfx.actual.$3 - tr '\015\000abcdef0123456789' QN00000000000000000 <"$2" >"$exp" && - tr '\015\000abcdef0123456789' QN00000000000000000 <"$3" >"$act" && + tr '\015\000abcdef0123456789' QN00000000000000000 <"$2" | + sed -e "s/0000*/$ZERO_OID/" >"$exp" && + tr '\015\000abcdef0123456789' QN00000000000000000 <"$3" | + sed -e "s/0000*/$ZERO_OID/" >"$act" && test_cmp "$exp" "$act" && rm "$exp" "$act" } diff --git a/t/t0028-working-tree-encoding.sh b/t/t0028-working-tree-encoding.sh index e58ecbfc44..1090e650ed 100755 --- a/t/t0028-working-tree-encoding.sh +++ b/t/t0028-working-tree-encoding.sh @@ -6,6 +6,30 @@ test_description='working-tree-encoding conversion via gitattributes' GIT_TRACE_WORKING_TREE_ENCODING=1 && export GIT_TRACE_WORKING_TREE_ENCODING +test_lazy_prereq NO_UTF16_BOM ' + test $(printf abc | iconv -f UTF-8 -t UTF-16 | wc -c) = 6 +' + +test_lazy_prereq NO_UTF32_BOM ' + test $(printf abc | iconv -f UTF-8 -t UTF-32 | wc -c) = 12 +' + +write_utf16 () { + if test_have_prereq NO_UTF16_BOM + then + printf '\xfe\xff' + fi && + iconv -f UTF-8 -t UTF-16 +} + +write_utf32 () { + if test_have_prereq NO_UTF32_BOM + then + printf '\x00\x00\xfe\xff' + fi && + iconv -f UTF-8 -t UTF-32 +} + test_expect_success 'setup test files' ' git config core.eol lf && @@ -13,8 +37,8 @@ test_expect_success 'setup test files' ' echo "*.utf16 text working-tree-encoding=utf-16" >.gitattributes && echo "*.utf16lebom text working-tree-encoding=UTF-16LE-BOM" >>.gitattributes && printf "$text" >test.utf8.raw && - printf "$text" | iconv -f UTF-8 -t UTF-16 >test.utf16.raw && - printf "$text" | iconv -f UTF-8 -t UTF-32 >test.utf32.raw && + printf "$text" | write_utf16 >test.utf16.raw && + printf "$text" | write_utf32 >test.utf32.raw && printf "\377\376" >test.utf16lebom.raw && printf "$text" | iconv -f UTF-8 -t UTF-32LE >>test.utf16lebom.raw && @@ -25,12 +49,12 @@ test_expect_success 'setup test files' ' # BOM tests printf "\0a\0b\0c" >nobom.utf16be.raw && printf "a\0b\0c\0" >nobom.utf16le.raw && - printf "\376\777\0a\0b\0c" >bebom.utf16be.raw && - printf "\777\376a\0b\0c\0" >lebom.utf16le.raw && + printf "\376\377\0a\0b\0c" >bebom.utf16be.raw && + printf "\377\376a\0b\0c\0" >lebom.utf16le.raw && printf "\0\0\0a\0\0\0b\0\0\0c" >nobom.utf32be.raw && printf "a\0\0\0b\0\0\0c\0\0\0" >nobom.utf32le.raw && - printf "\0\0\376\777\0\0\0a\0\0\0b\0\0\0c" >bebom.utf32be.raw && - printf "\777\376\0\0a\0\0\0b\0\0\0c\0\0\0" >lebom.utf32le.raw && + printf "\0\0\376\377\0\0\0a\0\0\0b\0\0\0c" >bebom.utf32be.raw && + printf "\377\376\0\0a\0\0\0b\0\0\0c\0\0\0" >lebom.utf32le.raw && # Add only UTF-16 file, we will add the UTF-32 file later cp test.utf16.raw test.utf16 && @@ -124,8 +148,8 @@ do test_when_finished "rm -f crlf.utf${i}.raw lf.utf${i}.raw" && test_when_finished "git reset --hard HEAD^" && - cat lf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >lf.utf${i}.raw && - cat crlf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >crlf.utf${i}.raw && + cat lf.utf8.raw | write_utf${i} >lf.utf${i}.raw && + cat crlf.utf8.raw | write_utf${i} >crlf.utf${i}.raw && cp crlf.utf${i}.raw eol.utf${i} && cat >expectIndexLF <<-EOF && @@ -223,7 +247,7 @@ test_expect_success ICONV_SHIFT_JIS 'check roundtrip encoding' ' text="hallo there!\nroundtrip test here!" && printf "$text" | iconv -f UTF-8 -t SHIFT-JIS >roundtrip.shift && - printf "$text" | iconv -f UTF-8 -t UTF-16 >roundtrip.utf16 && + printf "$text" | write_utf16 >roundtrip.utf16 && echo "*.shift text working-tree-encoding=SHIFT-JIS" >>.gitattributes && # SHIFT-JIS encoded files are round-trip checked by default... diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index b8f366c442..705a136ed9 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -48,6 +48,12 @@ Standard options -q, --quiet be quiet --expect <string> expected output in the variable dump +Alias + -A, --alias-source <string> + get a string + -Z, --alias-target <string> + get a string + EOF test_expect_success 'test help' ' @@ -203,23 +209,38 @@ file: (not set) EOF test_expect_success 'unambiguously abbreviated option' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ test-tool parse-options --int 2 --boolean --no-bo >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' test_expect_success 'unambiguously abbreviated option with "="' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ test-tool parse-options --expect="integer: 2" --int=2 ' test_expect_success 'ambiguously abbreviated option' ' - test_expect_code 129 test-tool parse-options --strin 123 + test_expect_code 129 env GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ + test-tool parse-options --strin 123 ' test_expect_success 'non ambiguous option (after two options it abbreviates)' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ test-tool parse-options --expect="string: 123" --st 123 ' +test_expect_success 'Alias options do not contribute to abbreviation' ' + test-tool parse-options --alias-source 123 >output && + grep "^string: 123" output && + test-tool parse-options --alias-target 123 >output && + grep "^string: 123" output && + test_must_fail test-tool parse-options --alias && + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ + test-tool parse-options --alias 123 >output && + grep "^string: 123" output +' + cat >typo.err <<\EOF error: did you mean `--boolean` (with two dashes ?) EOF @@ -325,6 +346,7 @@ file: (not set) EOF test_expect_success 'negation of OPT_NONEG flags is not ambiguous' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ test-tool parse-options --no-ambig >output 2>output.err && test_must_be_empty output.err && test_cmp expect output @@ -370,4 +392,18 @@ test_expect_success '--no-verbose resets multiple verbose to 0' ' test-tool parse-options --expect="verbose: 0" -v -v -v --no-verbose ' +test_expect_success 'GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS works' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ + test-tool parse-options --ye && + test_must_fail env GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=true \ + test-tool parse-options --ye +' + +test_expect_success '--end-of-options treats remainder as args' ' + test-tool parse-options \ + --expect="verbose: -1" \ + --expect="arg 00: --verbose" \ + --end-of-options --verbose +' + test_done diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index ebc49561ac..015fac8b5d 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -210,4 +210,10 @@ test_expect_success MINGW 'verify curlies are quoted properly' ' test_cmp expect actual ' +test_expect_success MINGW 'can spawn with argv[0] containing spaces' ' + cp "$GIT_BUILD_DIR/t/helper/test-fake-ssh$X" ./ && + test_must_fail "$PWD/test-fake-ssh$X" 2>err && + grep TRASH_DIRECTORY err +' + test_done diff --git a/t/t0066-dir-iterator.sh b/t/t0066-dir-iterator.sh new file mode 100755 index 0000000000..92910e4e6c --- /dev/null +++ b/t/t0066-dir-iterator.sh @@ -0,0 +1,148 @@ +#!/bin/sh + +test_description='Test the dir-iterator functionality' + +. ./test-lib.sh + +test_expect_success 'setup' ' + mkdir -p dir && + mkdir -p dir/a/b/c/ && + >dir/b && + >dir/c && + mkdir -p dir/d/e/d/ && + >dir/a/b/c/d && + >dir/a/e && + >dir/d/e/d/a && + + mkdir -p dir2/a/b/c/ && + >dir2/a/b/c/d +' + +test_expect_success 'dir-iterator should iterate through all files' ' + cat >expected-iteration-sorted-output <<-EOF && + [d] (a) [a] ./dir/a + [d] (a/b) [b] ./dir/a/b + [d] (a/b/c) [c] ./dir/a/b/c + [d] (d) [d] ./dir/d + [d] (d/e) [e] ./dir/d/e + [d] (d/e/d) [d] ./dir/d/e/d + [f] (a/b/c/d) [d] ./dir/a/b/c/d + [f] (a/e) [e] ./dir/a/e + [f] (b) [b] ./dir/b + [f] (c) [c] ./dir/c + [f] (d/e/d/a) [a] ./dir/d/e/d/a + EOF + + test-tool dir-iterator ./dir >out && + sort out >./actual-iteration-sorted-output && + + test_cmp expected-iteration-sorted-output actual-iteration-sorted-output +' + +test_expect_success 'dir-iterator should list files in the correct order' ' + cat >expected-pre-order-output <<-EOF && + [d] (a) [a] ./dir2/a + [d] (a/b) [b] ./dir2/a/b + [d] (a/b/c) [c] ./dir2/a/b/c + [f] (a/b/c/d) [d] ./dir2/a/b/c/d + EOF + + test-tool dir-iterator ./dir2 >actual-pre-order-output && + + test_cmp expected-pre-order-output actual-pre-order-output +' + +test_expect_success 'begin should fail upon inexistent paths' ' + test_must_fail test-tool dir-iterator ./inexistent-path \ + >actual-inexistent-path-output && + echo "dir_iterator_begin failure: ENOENT" >expected-inexistent-path-output && + test_cmp expected-inexistent-path-output actual-inexistent-path-output +' + +test_expect_success 'begin should fail upon non directory paths' ' + test_must_fail test-tool dir-iterator ./dir/b >actual-non-dir-output && + echo "dir_iterator_begin failure: ENOTDIR" >expected-non-dir-output && + test_cmp expected-non-dir-output actual-non-dir-output +' + +test_expect_success POSIXPERM,SANITY 'advance should not fail on errors by default' ' + cat >expected-no-permissions-output <<-EOF && + [d] (a) [a] ./dir3/a + EOF + + mkdir -p dir3/a && + >dir3/a/b && + chmod 0 dir3/a && + + test-tool dir-iterator ./dir3 >actual-no-permissions-output && + test_cmp expected-no-permissions-output actual-no-permissions-output && + chmod 755 dir3/a && + rm -rf dir3 +' + +test_expect_success POSIXPERM,SANITY 'advance should fail on errors, w/ pedantic flag' ' + cat >expected-no-permissions-pedantic-output <<-EOF && + [d] (a) [a] ./dir3/a + dir_iterator_advance failure + EOF + + mkdir -p dir3/a && + >dir3/a/b && + chmod 0 dir3/a && + + test_must_fail test-tool dir-iterator --pedantic ./dir3 \ + >actual-no-permissions-pedantic-output && + test_cmp expected-no-permissions-pedantic-output \ + actual-no-permissions-pedantic-output && + chmod 755 dir3/a && + rm -rf dir3 +' + +test_expect_success SYMLINKS 'setup dirs with symlinks' ' + mkdir -p dir4/a && + mkdir -p dir4/b/c && + >dir4/a/d && + ln -s d dir4/a/e && + ln -s ../b dir4/a/f && + + mkdir -p dir5/a/b && + mkdir -p dir5/a/c && + ln -s ../c dir5/a/b/d && + ln -s ../ dir5/a/b/e && + ln -s ../../ dir5/a/b/f +' + +test_expect_success SYMLINKS 'dir-iterator should not follow symlinks by default' ' + cat >expected-no-follow-sorted-output <<-EOF && + [d] (a) [a] ./dir4/a + [d] (b) [b] ./dir4/b + [d] (b/c) [c] ./dir4/b/c + [f] (a/d) [d] ./dir4/a/d + [s] (a/e) [e] ./dir4/a/e + [s] (a/f) [f] ./dir4/a/f + EOF + + test-tool dir-iterator ./dir4 >out && + sort out >actual-no-follow-sorted-output && + + test_cmp expected-no-follow-sorted-output actual-no-follow-sorted-output +' + +test_expect_success SYMLINKS 'dir-iterator should follow symlinks w/ follow flag' ' + cat >expected-follow-sorted-output <<-EOF && + [d] (a) [a] ./dir4/a + [d] (a/f) [f] ./dir4/a/f + [d] (a/f/c) [c] ./dir4/a/f/c + [d] (b) [b] ./dir4/b + [d] (b/c) [c] ./dir4/b/c + [f] (a/d) [d] ./dir4/a/d + [f] (a/e) [e] ./dir4/a/e + EOF + + test-tool dir-iterator --follow-symlinks ./dir4 >out && + sort out >actual-follow-sorted-output && + + test_cmp expected-follow-sorted-output actual-follow-sorted-output +' + +test_done diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh index 504334e552..ce9a4a5f32 100755 --- a/t/t0090-cache-tree.sh +++ b/t/t0090-cache-tree.sh @@ -162,8 +162,8 @@ test_expect_success PERL 'commit --interactive gives cache-tree on partial commi ' test_expect_success PERL 'commit -p with shrinking cache-tree' ' - mkdir -p deep/subdir && - echo content >deep/subdir/file && + mkdir -p deep/very-long-subdir && + echo content >deep/very-long-subdir/file && git add deep && git commit -m add && git rm -r deep && diff --git a/t/t0205-gettext-poison.sh b/t/t0205-gettext-poison.sh index a06269f38a..f9fa16ad83 100755 --- a/t/t0205-gettext-poison.sh +++ b/t/t0205-gettext-poison.sh @@ -5,7 +5,7 @@ test_description='Gettext Shell poison' -GIT_TEST_GETTEXT_POISON=YesPlease +GIT_TEST_GETTEXT_POISON=true export GIT_TEST_GETTEXT_POISON . ./lib-gettext.sh @@ -31,4 +31,9 @@ test_expect_success 'eval_gettext: our eval_gettext() fallback has poison semant test_cmp expect actual ' +test_expect_success "gettext: invalid GIT_TEST_GETTEXT_POISON value doesn't infinitely loop" " + test_must_fail env GIT_TEST_GETTEXT_POISON=xyz git version 2>error && + grep \"fatal: bad numeric config value 'xyz' for 'GIT_TEST_GETTEXT_POISON': invalid unit\" error +" + test_done diff --git a/t/t0210-trace2-normal.sh b/t/t0210-trace2-normal.sh new file mode 100755 index 0000000000..ce7574edb1 --- /dev/null +++ b/t/t0210-trace2-normal.sh @@ -0,0 +1,189 @@ +#!/bin/sh + +test_description='test trace2 facility (normal target)' +. ./test-lib.sh + +# Turn off any inherited trace2 settings for this test. +sane_unset GIT_TRACE2 GIT_TRACE2_PERF GIT_TRACE2_EVENT +sane_unset GIT_TRACE2_BRIEF +sane_unset GIT_TRACE2_CONFIG_PARAMS + +# Add t/helper directory to PATH so that we can use a relative +# path to run nested instances of test-tool.exe (see 004child). +# This helps with HEREDOC comparisons later. +TTDIR="$GIT_BUILD_DIR/t/helper/" && export TTDIR +PATH="$TTDIR:$PATH" && export PATH + +# Warning: use of 'test_cmp' may run test-tool.exe and/or git.exe +# Warning: to do the actual diff/comparison, so the HEREDOCs here +# Warning: only cover our actual calls to test-tool and/or git. +# Warning: So you may see extra lines in artifact files when +# Warning: interactively debugging. + +V=$(git version | sed -e 's/^git version //') && export V + +# There are multiple trace2 targets: normal, perf, and event. +# Trace2 events will/can be written to each active target (subject +# to whatever filtering that target decides to do). +# This script tests the normal target in isolation. +# +# Defer setting GIT_TRACE2 until the actual command line we want to test +# because hidden git and test-tool commands run by the test harness +# can contaminate our output. + +# Enable "brief" feature which turns off "<clock> <file>:<line> " prefix. +GIT_TRACE2_BRIEF=1 && export GIT_TRACE2_BRIEF + +# Basic tests of the trace2 normal stream. Since this stream is used +# primarily with printf-style debugging/tracing, we do limited testing +# here. +# +# We do confirm the following API features: +# [] the 'version <v>' event +# [] the 'start <argv>' event +# [] the 'cmd_name <name>' event +# [] the 'exit <time> code:<code>' event +# [] the 'atexit <time> code:<code>' event +# +# Fields of the form _FIELD_ are tokens that have been replaced (such +# as the elapsed time). + +# Verb 001return +# +# Implicit return from cmd_<verb> function propagates <code>. + +test_expect_success 'normal stream, return code 0' ' + test_when_finished "rm trace.normal actual expect" && + GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +test_expect_success 'normal stream, return code 1' ' + test_when_finished "rm trace.normal actual expect" && + test_must_fail env GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 001return 1 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 1 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:1 + atexit elapsed:_TIME_ code:1 + EOF + test_cmp expect actual +' + +test_expect_success 'automatic filename' ' + test_when_finished "rm -r traces actual expect" && + mkdir traces && + GIT_TRACE2="$(pwd)/traces" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <"$(ls traces/*)" >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +# Verb 002exit +# +# Explicit exit(code) from within cmd_<verb> propagates <code>. + +test_expect_success 'normal stream, exit code 0' ' + test_when_finished "rm trace.normal actual expect" && + GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 002exit 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 002exit 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +test_expect_success 'normal stream, exit code 1' ' + test_when_finished "rm trace.normal actual expect" && + test_must_fail env GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 002exit 1 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 002exit 1 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:1 + atexit elapsed:_TIME_ code:1 + EOF + test_cmp expect actual +' + +# Verb 003error +# +# To the above, add multiple 'error <msg>' events + +test_expect_success 'normal stream, error event' ' + test_when_finished "rm trace.normal actual expect" && + GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 003error "hello world" "this is a test" && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 003error '\''hello world'\'' '\''this is a test'\'' + cmd_name trace2 (trace2) + error hello world + error this is a test + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +sane_unset GIT_TRACE2_BRIEF + +# Now test without environment variables and get all Trace2 settings +# from the global config. + +test_expect_success 'using global config, normal stream, return code 0' ' + test_when_finished "rm trace.normal actual expect" && + test_config_global trace2.normalBrief 1 && + test_config_global trace2.normalTarget "$(pwd)/trace.normal" && + test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +test_expect_success 'using global config with include' ' + test_when_finished "rm trace.normal actual expect real.gitconfig" && + test_config_global trace2.normalBrief 1 && + test_config_global trace2.normalTarget "$(pwd)/trace.normal" && + mv "$(pwd)/.gitconfig" "$(pwd)/real.gitconfig" && + test_config_global include.path "$(pwd)/real.gitconfig" && + test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +test_done diff --git a/t/t0210/scrub_normal.perl b/t/t0210/scrub_normal.perl new file mode 100644 index 0000000000..c65d1a815e --- /dev/null +++ b/t/t0210/scrub_normal.perl @@ -0,0 +1,48 @@ +#!/usr/bin/perl +# +# Scrub the variable fields from the normal trace2 output to +# make testing easier. + +use strict; +use warnings; + +my $float = '[0-9]*\.[0-9]+([eE][-+]?[0-9]+)?'; + +# This code assumes that the trace2 data was written with bare +# turned on (which omits the "<clock> <file>:<line>" prefix. + +while (<>) { + # Various messages include an elapsed time in the middle + # of the message. Replace the time with a placeholder to + # simplify our HEREDOC in the test script. + s/elapsed:$float/elapsed:_TIME_/g; + + my $line = $_; + + # we expect: + # start <argv0> [<argv1> [<argv2> [...]]] + # + # where argv0 might be a relative or absolute path, with + # or without quotes, and platform dependent. Replace argv0 + # with a token for HEREDOC matching in the test script. + + if ($line =~ m/^start/) { + $line =~ /^start\s+(.*)/; + my $argv = $1; + $argv =~ m/(\'[^\']*\'|[^ ]+)\s+(.*)/; + my $argv_0 = $1; + my $argv_rest = $2; + + print "start _EXE_ $argv_rest\n"; + } + elsif ($line =~ m/^cmd_path/) { + # Likewise, the 'cmd_path' message breaks out argv[0]. + # + # This line is only emitted when RUNTIME_PREFIX is defined, + # so just omit it for testing purposes. + # print "cmd_path _EXE_\n"; + } + else { + print "$line"; + } +} diff --git a/t/t0211-trace2-perf.sh b/t/t0211-trace2-perf.sh new file mode 100755 index 0000000000..6ee8ee3b67 --- /dev/null +++ b/t/t0211-trace2-perf.sh @@ -0,0 +1,174 @@ +#!/bin/sh + +test_description='test trace2 facility (perf target)' +. ./test-lib.sh + +# Turn off any inherited trace2 settings for this test. +sane_unset GIT_TRACE2 GIT_TRACE2_PERF GIT_TRACE2_EVENT +sane_unset GIT_TRACE2_PERF_BRIEF +sane_unset GIT_TRACE2_CONFIG_PARAMS + +# Add t/helper directory to PATH so that we can use a relative +# path to run nested instances of test-tool.exe (see 004child). +# This helps with HEREDOC comparisons later. +TTDIR="$GIT_BUILD_DIR/t/helper/" && export TTDIR +PATH="$TTDIR:$PATH" && export PATH + +# Warning: use of 'test_cmp' may run test-tool.exe and/or git.exe +# Warning: to do the actual diff/comparison, so the HEREDOCs here +# Warning: only cover our actual calls to test-tool and/or git. +# Warning: So you may see extra lines in artifact files when +# Warning: interactively debugging. + +V=$(git version | sed -e 's/^git version //') && export V + +# There are multiple trace2 targets: normal, perf, and event. +# Trace2 events will/can be written to each active target (subject +# to whatever filtering that target decides to do). +# Test each target independently. +# +# Defer setting GIT_TRACE2_PERF until the actual command we want to +# test because hidden git and test-tool commands in the test +# harness can contaminate our output. + +# Enable "brief" feature which turns off the prefix: +# "<clock> <file>:<line> | <nr_parents> | " +GIT_TRACE2_PERF_BRIEF=1 && export GIT_TRACE2_PERF_BRIEF + +# Repeat some of the t0210 tests using the perf target stream instead of +# the normal stream. +# +# Tokens here of the form _FIELD_ have been replaced in the observed output. + +# Verb 001return +# +# Implicit return from cmd_<verb> function propagates <code>. + +test_expect_success 'perf stream, return code 0' ' + test_when_finished "rm trace.perf actual expect" && + GIT_TRACE2_PERF="$(pwd)/trace.perf" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 001return 0 + d0|main|cmd_name|||||trace2 (trace2) + d0|main|exit||_T_ABS_|||code:0 + d0|main|atexit||_T_ABS_|||code:0 + EOF + test_cmp expect actual +' + +test_expect_success 'perf stream, return code 1' ' + test_when_finished "rm trace.perf actual expect" && + test_must_fail env GIT_TRACE2_PERF="$(pwd)/trace.perf" test-tool trace2 001return 1 && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 001return 1 + d0|main|cmd_name|||||trace2 (trace2) + d0|main|exit||_T_ABS_|||code:1 + d0|main|atexit||_T_ABS_|||code:1 + EOF + test_cmp expect actual +' + +# Verb 003error +# +# To the above, add multiple 'error <msg>' events + +test_expect_success 'perf stream, error event' ' + test_when_finished "rm trace.perf actual expect" && + GIT_TRACE2_PERF="$(pwd)/trace.perf" test-tool trace2 003error "hello world" "this is a test" && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 003error '\''hello world'\'' '\''this is a test'\'' + d0|main|cmd_name|||||trace2 (trace2) + d0|main|error|||||hello world + d0|main|error|||||this is a test + d0|main|exit||_T_ABS_|||code:0 + d0|main|atexit||_T_ABS_|||code:0 + EOF + test_cmp expect actual +' + +# Verb 004child +# +# Test nested spawning of child processes. +# +# Conceptually, this looks like: +# P1: TT trace2 004child +# P2: |--- TT trace2 004child +# P3: |--- TT trace2 001return 0 +# +# Which should generate events: +# P1: version +# P1: start +# P1: cmd_name +# P1: child_start +# P2: version +# P2: start +# P2: cmd_name +# P2: child_start +# P3: version +# P3: start +# P3: cmd_name +# P3: exit +# P3: atexit +# P2: child_exit +# P2: exit +# P2: atexit +# P1: child_exit +# P1: exit +# P1: atexit + +test_expect_success 'perf stream, child processes' ' + test_when_finished "rm trace.perf actual expect" && + GIT_TRACE2_PERF="$(pwd)/trace.perf" test-tool trace2 004child test-tool trace2 004child test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 004child test-tool trace2 004child test-tool trace2 001return 0 + d0|main|cmd_name|||||trace2 (trace2) + d0|main|child_start||_T_ABS_|||[ch0] class:? argv:[test-tool trace2 004child test-tool trace2 001return 0] + d1|main|version|||||$V + d1|main|start||_T_ABS_|||_EXE_ trace2 004child test-tool trace2 001return 0 + d1|main|cmd_name|||||trace2 (trace2/trace2) + d1|main|child_start||_T_ABS_|||[ch0] class:? argv:[test-tool trace2 001return 0] + d2|main|version|||||$V + d2|main|start||_T_ABS_|||_EXE_ trace2 001return 0 + d2|main|cmd_name|||||trace2 (trace2/trace2/trace2) + d2|main|exit||_T_ABS_|||code:0 + d2|main|atexit||_T_ABS_|||code:0 + d1|main|child_exit||_T_ABS_|_T_REL_||[ch0] pid:_PID_ code:0 + d1|main|exit||_T_ABS_|||code:0 + d1|main|atexit||_T_ABS_|||code:0 + d0|main|child_exit||_T_ABS_|_T_REL_||[ch0] pid:_PID_ code:0 + d0|main|exit||_T_ABS_|||code:0 + d0|main|atexit||_T_ABS_|||code:0 + EOF + test_cmp expect actual +' + +sane_unset GIT_TRACE2_PERF_BRIEF + +# Now test without environment variables and get all Trace2 settings +# from the global config. + +test_expect_success 'using global config, perf stream, return code 0' ' + test_when_finished "rm trace.perf actual expect" && + test_config_global trace2.perfBrief 1 && + test_config_global trace2.perfTarget "$(pwd)/trace.perf" && + test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 001return 0 + d0|main|cmd_name|||||trace2 (trace2) + d0|main|exit||_T_ABS_|||code:0 + d0|main|atexit||_T_ABS_|||code:0 + EOF + test_cmp expect actual +' + +test_done diff --git a/t/t0211/scrub_perf.perl b/t/t0211/scrub_perf.perl new file mode 100644 index 0000000000..351af7844e --- /dev/null +++ b/t/t0211/scrub_perf.perl @@ -0,0 +1,76 @@ +#!/usr/bin/perl +# +# Scrub the variable fields from the perf trace2 output to +# make testing easier. + +use strict; +use warnings; + +my $qpath = '\'[^\']*\'|[^ ]*'; + +my $col_depth=0; +my $col_thread=1; +my $col_event=2; +my $col_repo=3; +my $col_t_abs=4; +my $col_t_rel=5; +my $col_category=6; +my $col_rest=7; + +# This code assumes that the trace2 data was written with bare +# turned on (which omits the "<clock> <file>:<line> | <parents>" +# prefix. + +while (<>) { + my @tokens = split /\|/; + + foreach my $col (@tokens) { $col =~ s/^\s+|\s+$//g; } + + if ($tokens[$col_event] =~ m/^start/) { + # The 'start' message lists the contents of argv in $col_rest. + # On some platforms (Windows), argv[0] is *sometimes* a canonical + # absolute path to the EXE rather than the value passed in the + # shell script. Replace it with a placeholder to simplify our + # HEREDOC in the test script. + my $argv0; + my $argvRest; + $tokens[$col_rest] =~ s/^($qpath)\W*(.*)/_EXE_ $2/; + } + elsif ($tokens[$col_event] =~ m/cmd_path/) { + # Likewise, the 'cmd_path' message breaks out argv[0]. + # + # This line is only emitted when RUNTIME_PREFIX is defined, + # so just omit it for testing purposes. + # $tokens[$col_rest] = "_EXE_"; + goto SKIP_LINE; + } + elsif ($tokens[$col_event] =~ m/child_exit/) { + $tokens[$col_rest] =~ s/ pid:\d* / pid:_PID_ /; + } + elsif ($tokens[$col_event] =~ m/data/) { + if ($tokens[$col_category] =~ m/process/) { + # 'data' and 'data_json' events containing 'process' + # category data are assumed to be platform-specific + # and highly variable. Just omit them. + goto SKIP_LINE; + } + } + + # t_abs and t_rel are either blank or a float. Replace the float + # with a constant for matching the HEREDOC in the test script. + if ($tokens[$col_t_abs] =~ m/\d/) { + $tokens[$col_t_abs] = "_T_ABS_"; + } + if ($tokens[$col_t_rel] =~ m/\d/) { + $tokens[$col_t_rel] = "_T_REL_"; + } + + my $out; + + $out = join('|', @tokens); + print "$out\n"; + + SKIP_LINE: +} + + diff --git a/t/t0212-trace2-event.sh b/t/t0212-trace2-event.sh new file mode 100755 index 0000000000..ff5b9cc729 --- /dev/null +++ b/t/t0212-trace2-event.sh @@ -0,0 +1,268 @@ +#!/bin/sh + +test_description='test trace2 facility' +. ./test-lib.sh + +# Turn off any inherited trace2 settings for this test. +sane_unset GIT_TRACE2 GIT_TRACE2_PERF GIT_TRACE2_EVENT +sane_unset GIT_TRACE2_BARE +sane_unset GIT_TRACE2_CONFIG_PARAMS + +perl -MJSON::PP -e 0 >/dev/null 2>&1 && test_set_prereq JSON_PP + +# Add t/helper directory to PATH so that we can use a relative +# path to run nested instances of test-tool.exe (see 004child). +# This helps with HEREDOC comparisons later. +TTDIR="$GIT_BUILD_DIR/t/helper/" && export TTDIR +PATH="$TTDIR:$PATH" && export PATH + +# Warning: use of 'test_cmp' may run test-tool.exe and/or git.exe +# Warning: to do the actual diff/comparison, so the HEREDOCs here +# Warning: only cover our actual calls to test-tool and/or git. +# Warning: So you may see extra lines in artifact files when +# Warning: interactively debugging. + +V=$(git version | sed -e 's/^git version //') && export V + +# There are multiple trace2 targets: normal, perf, and event. +# Trace2 events will/can be written to each active target (subject +# to whatever filtering that target decides to do). +# Test each target independently. +# +# Defer setting GIT_TRACE2_PERF until the actual command we want to +# test because hidden git and test-tool commands in the test +# harness can contaminate our output. + +# We don't bother repeating the 001return and 002exit tests, since they +# have coverage in the normal and perf targets. + +# Verb 003error +# +# To the above, add multiple 'error <msg>' events + +test_expect_success JSON_PP 'event stream, error event' ' + test_when_finished "rm trace.event actual expect" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" test-tool trace2 003error "hello world" "this is a test" && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "003error", + | "hello world", + | "this is a test" + | ], + | "errors":[ + | "%s", + | "%s" + | ], + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +# Verb 004child +# +# Test nested spawning of child processes. +# +# Conceptually, this looks like: +# P1: TT trace2 004child +# P2: |--- TT trace2 004child +# P3: |--- TT trace2 001return 0 + +test_expect_success JSON_PP 'event stream, return code 0' ' + test_when_finished "rm trace.event actual expect" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" test-tool trace2 004child test-tool trace2 004child test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "004child", + | "test-tool", + | "trace2", + | "004child", + | "test-tool", + | "trace2", + | "001return", + | "0" + | ], + | "child":{ + | "0":{ + | "child_argv":[ + | "_EXE_", + | "trace2", + | "004child", + | "test-tool", + | "trace2", + | "001return", + | "0" + | ], + | "child_class":"?", + | "child_code":0, + | "use_shell":0 + | } + | }, + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "version":"$V" + | }, + | "_SID0_/_SID1_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "004child", + | "test-tool", + | "trace2", + | "001return", + | "0" + | ], + | "child":{ + | "0":{ + | "child_argv":[ + | "_EXE_", + | "trace2", + | "001return", + | "0" + | ], + | "child_class":"?", + | "child_code":0, + | "use_shell":0 + | } + | }, + | "exit_code":0, + | "hierarchy":"trace2/trace2", + | "name":"trace2", + | "version":"$V" + | }, + | "_SID0_/_SID1_/_SID2_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "001return", + | "0" + | ], + | "exit_code":0, + | "hierarchy":"trace2/trace2/trace2", + | "name":"trace2", + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +# Test listing of all "interesting" config settings. + +test_expect_success JSON_PP 'event stream, list config' ' + test_when_finished "rm trace.event actual expect" && + git config --local t0212.abc 1 && + git config --local t0212.def "hello world" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" GIT_TRACE2_CONFIG_PARAMS="t0212.*" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "001return", + | "0" + | ], + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "params":[ + | { + | "param":"t0212.abc", + | "value":"1" + | }, + | { + | "param":"t0212.def", + | "value":"hello world" + | } + | ], + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +test_expect_success JSON_PP 'basic trace2_data' ' + test_when_finished "rm trace.event actual expect" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" test-tool trace2 006data test_category k1 v1 test_category k2 v2 && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "006data", + | "test_category", + | "k1", + | "v1", + | "test_category", + | "k2", + | "v2" + | ], + | "data":{ + | "test_category":{ + | "k1":"v1", + | "k2":"v2" + | } + | }, + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +# Now test without environment variables and get all Trace2 settings +# from the global config. + +test_expect_success JSON_PP 'using global config, event stream, error event' ' + test_when_finished "rm trace.event actual expect" && + test_config_global trace2.eventTarget "$(pwd)/trace.event" && + test-tool trace2 003error "hello world" "this is a test" && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "003error", + | "hello world", + | "this is a test" + | ], + | "errors":[ + | "%s", + | "%s" + | ], + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +test_done diff --git a/t/t0212/parse_events.perl b/t/t0212/parse_events.perl new file mode 100644 index 0000000000..6584bb5634 --- /dev/null +++ b/t/t0212/parse_events.perl @@ -0,0 +1,251 @@ +#!/usr/bin/perl +# +# Parse event stream and convert individual events into a summary +# record for the process. +# +# Git.exe generates one or more "event" records for each API method, +# such as "start <argv>" and "exit <code>", during the life of the git +# process. Additionally, the input may contain interleaved events +# from multiple concurrent git processes and/or multiple threads from +# within a git process. +# +# Accumulate events for each process (based on its unique SID) in a +# dictionary and emit process summary records. +# +# Convert some of the variable fields (such as elapsed time) into +# placeholders (or omit them) to make HEREDOC comparisons easier in +# the test scripts. +# +# We may also omit fields not (currently) useful for testing purposes. + +use strict; +use warnings; +use JSON::PP; +use Data::Dumper; +use Getopt::Long; + +# The version of the trace2 event target format that we understand. +# This is reported in the 'version' event in the 'evt' field. +# It comes from the GIT_TRACE2_EVENT_VERSION macro in trace2/tr2_tgt_event.c +my $evt_version = '1'; + +my $show_children = 1; +my $show_exec = 1; +my $show_threads = 1; + +# A hack to generate test HEREDOC data for pasting into the test script. +# Usage: +# cd "t/trash directory.t0212-trace2-event" +# $TT trace ... >trace.event +# VV=$(../../git.exe version | sed -e 's/^git version //') +# perl ../t0212/parse_events.perl --HEREDOC --VERSION=$VV <trace.event >heredoc +# Then paste heredoc into your new test. + +my $gen_heredoc = 0; +my $gen_version = ''; + +GetOptions("children!" => \$show_children, + "exec!" => \$show_exec, + "threads!" => \$show_threads, + "HEREDOC!" => \$gen_heredoc, + "VERSION=s" => \$gen_version ) + or die("Error in command line arguments\n"); + + +# SIDs contains timestamps and PIDs of the process and its parents. +# This makes it difficult to match up in a HEREDOC in the test script. +# Build a map from actual SIDs to predictable constant values and yet +# keep the parent/child relationships. For example: +# {..., "sid":"1539706952458276-8652", ...} +# {..., "sid":"1539706952458276-8652/1539706952649493-15452", ...} +# becomes: +# {..., "sid":"_SID1_", ...} +# {..., "sid":"_SID1_/_SID2_", ...} +my $sid_map; +my $sid_count = 0; + +my $processes; + +while (<>) { + my $line = decode_json( $_ ); + + my $sid = ""; + my $sid_sep = ""; + + my $raw_sid = $line->{'sid'}; + my @raw_sid_parts = split /\//, $raw_sid; + foreach my $raw_sid_k (@raw_sid_parts) { + if (!exists $sid_map->{$raw_sid_k}) { + $sid_map->{$raw_sid_k} = '_SID' . $sid_count . '_'; + $sid_count++; + } + $sid = $sid . $sid_sep . $sid_map->{$raw_sid_k}; + $sid_sep = '/'; + } + + my $event = $line->{'event'}; + + if ($event eq 'version') { + $processes->{$sid}->{'version'} = $line->{'exe'}; + if ($gen_heredoc == 1 && $gen_version eq $line->{'exe'}) { + # If we are generating data FOR the test script, replace + # the reported git.exe version with a reference to an + # environment variable. When our output is pasted into + # the test script, it will then be expanded in future + # test runs to the THEN current version of git.exe. + # We assume that the test script uses env var $V. + $processes->{$sid}->{'version'} = "\$V"; + } + } + + elsif ($event eq 'start') { + $processes->{$sid}->{'argv'} = $line->{'argv'}; + $processes->{$sid}->{'argv'}[0] = "_EXE_"; + } + + elsif ($event eq 'exit') { + $processes->{$sid}->{'exit_code'} = $line->{'code'}; + } + + elsif ($event eq 'atexit') { + $processes->{$sid}->{'exit_code'} = $line->{'code'}; + } + + elsif ($event eq 'error') { + # For HEREDOC purposes, use the error message format string if + # available, rather than the formatted message (which probably + # has an absolute pathname). + if (exists $line->{'fmt'}) { + push( @{$processes->{$sid}->{'errors'}}, $line->{'fmt'} ); + } + elsif (exists $line->{'msg'}) { + push( @{$processes->{$sid}->{'errors'}}, $line->{'msg'} ); + } + } + + elsif ($event eq 'cmd_path') { + ## $processes->{$sid}->{'path'} = $line->{'path'}; + # + # Like in the 'start' event, we need to replace the value of + # argv[0] with a token for HEREDOC purposes. However, the + # event is only emitted when RUNTIME_PREFIX is defined, so + # just omit it for testing purposes. + # $processes->{$sid}->{'path'} = "_EXE_"; + } + + elsif ($event eq 'cmd_name') { + $processes->{$sid}->{'name'} = $line->{'name'}; + $processes->{$sid}->{'hierarchy'} = $line->{'hierarchy'}; + } + + elsif ($event eq 'alias') { + $processes->{$sid}->{'alias'}->{'key'} = $line->{'alias'}; + $processes->{$sid}->{'alias'}->{'argv'} = $line->{'argv'}; + } + + elsif ($event eq 'def_param') { + my $kv; + $kv->{'param'} = $line->{'param'}; + $kv->{'value'} = $line->{'value'}; + push( @{$processes->{$sid}->{'params'}}, $kv ); + } + + elsif ($event eq 'child_start') { + if ($show_children == 1) { + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'child_class'} = $line->{'child_class'}; + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'child_argv'} = $line->{'argv'}; + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'child_argv'}[0] = "_EXE_"; + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'use_shell'} = $line->{'use_shell'} ? 1 : 0; + } + } + + elsif ($event eq 'child_exit') { + if ($show_children == 1) { + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'child_code'} = $line->{'code'}; + } + } + + # TODO decide what information we want to test from thread events. + + elsif ($event eq 'thread_start') { + if ($show_threads == 1) { + } + } + + elsif ($event eq 'thread_exit') { + if ($show_threads == 1) { + } + } + + # TODO decide what information we want to test from exec events. + + elsif ($event eq 'exec') { + if ($show_exec == 1) { + } + } + + elsif ($event eq 'exec_result') { + if ($show_exec == 1) { + } + } + + elsif ($event eq 'def_param') { + # Accumulate parameter key/value pairs by key rather than in an array + # so that we get overwrite (last one wins) effects. + $processes->{$sid}->{'params'}->{$line->{'param'}} = $line->{'value'}; + } + + elsif ($event eq 'def_repo') { + # $processes->{$sid}->{'repos'}->{$line->{'repo'}} = $line->{'worktree'}; + $processes->{$sid}->{'repos'}->{$line->{'repo'}} = "_WORKTREE_"; + } + + # A series of potentially nested and threaded region and data events + # is fundamentally incompatibile with the type of summary record we + # are building in this script. Since they are intended for + # perf-trace-like analysis rather than a result summary, we ignore + # most of them here. + + # elsif ($event eq 'region_enter') { + # } + # elsif ($event eq 'region_leave') { + # } + + elsif ($event eq 'data') { + my $cat = $line->{'category'}; + if ($cat eq 'test_category') { + + my $key = $line->{'key'}; + my $value = $line->{'value'}; + $processes->{$sid}->{'data'}->{$cat}->{$key} = $value; + } + } + + # This trace2 target does not emit 'printf' events. + # + # elsif ($event eq 'printf') { + # } +} + +# Dump the resulting hash into something that we can compare against +# in the test script. These options make Dumper output look a little +# bit like JSON. Also convert variable references of the form "$VAR*" +# so that the matching HEREDOC doesn't need to escape it. + +$Data::Dumper::Sortkeys = 1; +$Data::Dumper::Indent = 1; +$Data::Dumper::Purity = 1; +$Data::Dumper::Pair = ':'; + +my $out = Dumper($processes); +$out =~ s/'/"/g; +$out =~ s/\$VAR/VAR/g; + +# Finally, if we're running this script to generate (manually confirmed) +# data to add to the test script, guard the indentation. + +if ($gen_heredoc == 1) { + $out =~ s/^/\t\|/gms; +} + +print $out; diff --git a/t/t0301-credential-cache.sh b/t/t0301-credential-cache.sh index fd92533acf..ebd5fa5249 100755 --- a/t/t0301-credential-cache.sh +++ b/t/t0301-credential-cache.sh @@ -10,7 +10,7 @@ test -z "$NO_UNIX_SOCKETS" || { } # don't leave a stale daemon running -trap 'code=$?; git credential-cache exit; (exit $code); die' EXIT +test_atexit 'git credential-cache exit' # test that the daemon works with no special setup helper_test cache @@ -108,9 +108,4 @@ test_expect_success SYMLINKS 'use user socket if user directory is a symlink to helper_test_timeout cache --timeout=1 -# we can't rely on our "trap" above working after test_done, -# as test_done will delete the trash directory containing -# our socket, leaving us with no way to access the daemon. -git credential-cache exit - test_done diff --git a/t/t0410-partial-clone.sh b/t/t0410-partial-clone.sh index bce02788e6..d4b7e535ea 100755 --- a/t/t0410-partial-clone.sh +++ b/t/t0410-partial-clone.sh @@ -26,7 +26,7 @@ promise_and_delete () { test_expect_success 'extensions.partialclone without filter' ' test_create_repo server && git clone --filter="blob:none" "file://$(pwd)/server" client && - git -C client config --unset core.partialclonefilter && + git -C client config --unset remote.origin.partialclonefilter && git -C client fetch origin ' @@ -166,8 +166,9 @@ test_expect_success 'fetching of missing objects' ' # associated packfile contains the object ls repo/.git/objects/pack/pack-*.promisor >promisorlist && test_line_count = 1 promisorlist && - IDX=$(cat promisorlist | sed "s/promisor$/idx/") && - git verify-pack --verbose "$IDX" | grep "$HASH" + IDX=$(sed "s/promisor$/idx/" promisorlist) && + git verify-pack --verbose "$IDX" >out && + grep "$HASH" out ' test_expect_success 'fetching of missing objects works with ref-in-want enabled' ' @@ -182,8 +183,55 @@ test_expect_success 'fetching of missing objects works with ref-in-want enabled' grep "git< fetch=.*ref-in-want" trace ' +test_expect_success 'fetching of missing objects from another promisor remote' ' + git clone "file://$(pwd)/server" server2 && + test_commit -C server2 bar && + git -C server2 repack -a -d --write-bitmap-index && + HASH2=$(git -C server2 rev-parse bar) && + + git -C repo remote add server2 "file://$(pwd)/server2" && + git -C repo config remote.server2.promisor true && + git -C repo cat-file -p "$HASH2" && + + git -C repo fetch server2 && + rm -rf repo/.git/objects/* && + git -C repo cat-file -p "$HASH2" && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(sed "s/promisor$/idx/" promisorlist) && + git verify-pack --verbose "$IDX" >out && + grep "$HASH2" out +' + +test_expect_success 'fetching of missing objects configures a promisor remote' ' + git clone "file://$(pwd)/server" server3 && + test_commit -C server3 baz && + git -C server3 repack -a -d --write-bitmap-index && + HASH3=$(git -C server3 rev-parse baz) && + git -C server3 config uploadpack.allowfilter 1 && + + rm repo/.git/objects/pack/pack-*.promisor && + + git -C repo remote add server3 "file://$(pwd)/server3" && + git -C repo fetch --filter="blob:none" server3 $HASH3 && + + test_cmp_config -C repo true remote.server3.promisor && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(sed "s/promisor$/idx/" promisorlist) && + git verify-pack --verbose "$IDX" >out && + grep "$HASH3" out +' + test_expect_success 'fetching of missing blobs works' ' - rm -rf server repo && + rm -rf server server2 repo && + rm -rf server server3 repo && test_create_repo server && test_commit -C server foo && git -C server repack -a -d --write-bitmap-index && @@ -234,7 +282,7 @@ test_expect_success 'rev-list stops traversal at missing and promised commit' ' git -C repo config core.repositoryformatversion 1 && git -C repo config extensions.partialclone "arbitrary string" && - GIT_TEST_COMMIT_GRAPH=0 git -C repo rev-list --exclude-promisor-objects --objects bar >out && + GIT_TEST_COMMIT_GRAPH=0 git -C repo -c core.commitGraph=false rev-list --exclude-promisor-objects --objects bar >out && grep $(git -C repo rev-parse bar) out && ! grep $FOO out ' @@ -514,10 +562,12 @@ test_expect_success 'fetching of missing objects from an HTTP server' ' # associated packfile contains the object ls repo/.git/objects/pack/pack-*.promisor >promisorlist && test_line_count = 1 promisorlist && - IDX=$(cat promisorlist | sed "s/promisor$/idx/") && - git verify-pack --verbose "$IDX" | grep "$HASH" + IDX=$(sed "s/promisor$/idx/" promisorlist) && + git verify-pack --verbose "$IDX" >out && + grep "$HASH" out ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh index a37753047e..64b340f227 100755 --- a/t/t1007-hash-object.sh +++ b/t/t1007-hash-object.sh @@ -9,22 +9,19 @@ echo_without_newline() { } test_blob_does_not_exist() { - test_expect_success SHA1 'blob does not exist in database' " + test_expect_success 'blob does not exist in database' " test_must_fail git cat-file blob $1 " } test_blob_exists() { - test_expect_success SHA1 'blob exists in database' " + test_expect_success 'blob exists in database' " git cat-file blob $1 " } hello_content="Hello World" -hello_sha1=5e1c309dae7f45e0f39b1bf3ac3cd9db12e7d689 - example_content="This is an example" -example_sha1=ddd3f836d3e3fbb7ae289aa9ae83536f76956399 setup_repo() { echo_without_newline "$hello_content" > hello @@ -44,7 +41,16 @@ pop_repo() { rm -rf $test_repo } -setup_repo +test_expect_success 'setup' ' + setup_repo && + test_oid_cache <<-EOF + hello sha1:5e1c309dae7f45e0f39b1bf3ac3cd9db12e7d689 + hello sha256:1e3b6c04d2eeb2b3e45c8a330445404c0b7cc7b257e2b097167d26f5230090c4 + + example sha1:ddd3f836d3e3fbb7ae289aa9ae83536f76956399 + example sha256:b44fe1fe65589848253737db859bd490453510719d7424daab03daf0767b85ae + EOF +' # Argument checking @@ -73,23 +79,23 @@ test_expect_success "Can't use --path with --no-filters" ' push_repo -test_expect_success SHA1 'hash a file' ' - test $hello_sha1 = $(git hash-object hello) +test_expect_success 'hash a file' ' + test "$(test_oid hello)" = $(git hash-object hello) ' -test_blob_does_not_exist $hello_sha1 +test_blob_does_not_exist "$(test_oid hello)" -test_expect_success SHA1 'hash from stdin' ' - test $example_sha1 = $(git hash-object --stdin < example) +test_expect_success 'hash from stdin' ' + test "$(test_oid example)" = $(git hash-object --stdin < example) ' -test_blob_does_not_exist $example_sha1 +test_blob_does_not_exist "$(test_oid example)" -test_expect_success SHA1 'hash a file and write to database' ' - test $hello_sha1 = $(git hash-object -w hello) +test_expect_success 'hash a file and write to database' ' + test "$(test_oid hello)" = $(git hash-object -w hello) ' -test_blob_exists $hello_sha1 +test_blob_exists "$(test_oid hello)" test_expect_success 'git hash-object --stdin file1 <file0 first operates on file0, then file1' ' echo foo > file1 && @@ -161,11 +167,11 @@ pop_repo for args in "-w --stdin" "--stdin -w"; do push_repo - test_expect_success SHA1 "hash from stdin and write to database ($args)" ' - test $example_sha1 = $(git hash-object $args < example) + test_expect_success "hash from stdin and write to database ($args)" ' + test "$(test_oid example)" = $(git hash-object $args < example) ' - test_blob_exists $example_sha1 + test_blob_exists "$(test_oid example)" pop_repo done @@ -173,22 +179,22 @@ done filenames="hello example" -sha1s="$hello_sha1 -$example_sha1" +oids="$(test_oid hello) +$(test_oid example)" -test_expect_success SHA1 "hash two files with names on stdin" ' - test "$sha1s" = "$(echo_without_newline "$filenames" | git hash-object --stdin-paths)" +test_expect_success "hash two files with names on stdin" ' + test "$oids" = "$(echo_without_newline "$filenames" | git hash-object --stdin-paths)" ' for args in "-w --stdin-paths" "--stdin-paths -w"; do push_repo - test_expect_success SHA1 "hash two files with names on stdin and write to database ($args)" ' - test "$sha1s" = "$(echo_without_newline "$filenames" | git hash-object $args)" + test_expect_success "hash two files with names on stdin and write to database ($args)" ' + test "$oids" = "$(echo_without_newline "$filenames" | git hash-object $args)" ' - test_blob_exists $hello_sha1 - test_blob_exists $example_sha1 + test_blob_exists "$(test_oid hello)" + test_blob_exists "$(test_oid example)" pop_repo done @@ -199,10 +205,6 @@ test_expect_success 'too-short tree' ' test_i18ngrep "too-short tree object" err ' -hex2oct() { - perl -ne 'printf "\\%03o", hex for /../g' -} - test_expect_success 'malformed mode in tree' ' hex_sha1=$(echo foo | git hash-object --stdin -w) && bin_sha1=$(echo $hex_sha1 | hex2oct) && diff --git a/t/t1060-object-corruption.sh b/t/t1060-object-corruption.sh index 4feb65157d..bc89371f53 100755 --- a/t/t1060-object-corruption.sh +++ b/t/t1060-object-corruption.sh @@ -127,4 +127,14 @@ test_expect_success 'fetch into corrupted repo with index-pack' ' ) ' +test_expect_success 'internal tree objects are not "missing"' ' + git init missing-empty && + ( + cd missing-empty && + empty_tree=$(git hash-object -t tree /dev/null) && + commit=$(echo foo | git commit-tree $empty_tree) && + git rev-list --objects $commit + ) +' + test_done diff --git a/t/t1090-sparse-checkout-scope.sh b/t/t1090-sparse-checkout-scope.sh index 090b7fc3d3..40cc004326 100755 --- a/t/t1090-sparse-checkout-scope.sh +++ b/t/t1090-sparse-checkout-scope.sh @@ -31,20 +31,6 @@ test_expect_success 'perform sparse checkout of master' ' test_path_is_file c ' -test_expect_success 'checkout -b checkout.optimizeNewBranch interaction' ' - cp .git/info/sparse-checkout .git/info/sparse-checkout.bak && - test_when_finished " - mv -f .git/info/sparse-checkout.bak .git/info/sparse-checkout - git checkout master - " && - echo "/b" >>.git/info/sparse-checkout && - test "$(git ls-files -t b)" = "S b" && - git -c checkout.optimizeNewBranch=true checkout -b fast && - test "$(git ls-files -t b)" = "S b" && - git checkout -b slow && - test "$(git ls-files -t b)" = "H b" -' - test_expect_success 'merge feature branch into sparse checkout of master' ' git merge feature && test_path_is_file a && diff --git a/t/t1300-config.sh b/t/t1300-config.sh index 9652b241c7..983a0a1583 100755 --- a/t/t1300-config.sh +++ b/t/t1300-config.sh @@ -892,6 +892,7 @@ test_expect_success 'get --expiry-date' ' 1510348087 0 EOF + : "work around heredoc parsing bug fixed in dash 0.5.7 (in ec2c84d)" && { echo "$rel_out $(git config --expiry-date date.valid1)" git config --expiry-date date.valid2 && @@ -1293,26 +1294,25 @@ test_expect_success 'git -c is not confused by empty environment' ' GIT_CONFIG_PARAMETERS="" git -c x.one=1 config --list ' -sq="'" test_expect_success 'detect bogus GIT_CONFIG_PARAMETERS' ' cat >expect <<-\EOF && env.one one env.two two EOF - GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq} ${sq}env.two=two${sq}" \ + GIT_CONFIG_PARAMETERS="${SQ}env.one=one${SQ} ${SQ}env.two=two${SQ}" \ git config --get-regexp "env.*" >actual && test_cmp expect actual && cat >expect <<-EOF && - env.one one${sq} + env.one one${SQ} env.two two EOF - GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq$sq$sq ${sq}env.two=two${sq}" \ + GIT_CONFIG_PARAMETERS="${SQ}env.one=one${SQ}\\$SQ$SQ$SQ ${SQ}env.two=two${SQ}" \ git config --get-regexp "env.*" >actual && test_cmp expect actual && test_must_fail env \ - GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq ${sq}env.two=two${sq}" \ + GIT_CONFIG_PARAMETERS="${SQ}env.one=one${SQ}\\$SQ ${SQ}env.two=two${SQ}" \ git config --get-regexp "env.*" ' diff --git a/t/t1301-shared-repo.sh b/t/t1301-shared-repo.sh index dfece751b5..2dc853d1be 100755 --- a/t/t1301-shared-repo.sh +++ b/t/t1301-shared-repo.sh @@ -136,7 +136,7 @@ test_expect_success POSIXPERM 'forced modes' ' ( cd new && umask 002 && - git init --shared=0660 --template=../templates && + git init --shared=0660 --template=templates && >frotz && git add frotz && git commit -a -m initial && @@ -192,7 +192,7 @@ test_expect_success POSIXPERM 're-init respects core.sharedrepository (remote)' umask 0022 && git init --bare --shared=0666 child.git && test_path_is_missing child.git/foo && - git init --bare --template=../templates child.git && + git init --bare --template=templates child.git && echo "-rw-rw-rw-" >expect && test_modebits child.git/foo >actual && test_cmp expect actual @@ -203,7 +203,7 @@ test_expect_success POSIXPERM 'template can set core.sharedrepository' ' umask 0022 && git config core.sharedrepository 0666 && cp .git/config templates/config && - git init --bare --template=../templates child.git && + git init --bare --template=templates child.git && echo "-rw-rw-rw-" >expect && test_modebits child.git/HEAD >actual && test_cmp expect actual diff --git a/t/t1305-config-include.sh b/t/t1305-config-include.sh index 635918505d..d20b4d150d 100755 --- a/t/t1305-config-include.sh +++ b/t/t1305-config-include.sh @@ -229,6 +229,19 @@ test_expect_success 'conditional include, early config reading' ' ) ' +test_expect_success 'conditional include with /**/' ' + REPO=foo/bar/repo && + git init $REPO && + cat >>$REPO/.git/config <<-\EOF && + [includeIf "gitdir:**/foo/**/bar/**"] + path=bar7 + EOF + echo "[test]seven=7" >$REPO/.git/bar7 && + echo 7 >expect && + git -C $REPO config test.seven >actual && + test_cmp expect actual +' + test_expect_success SYMLINKS 'conditional include, set up symlinked $HOME' ' mkdir real-home && ln -s real-home home && @@ -296,21 +309,53 @@ test_expect_success SYMLINKS 'conditional include, gitdir matching symlink, icas ) ' +test_expect_success 'conditional include, onbranch' ' + echo "[includeIf \"onbranch:foo-branch\"]path=bar9" >>.git/config && + echo "[test]nine=9" >.git/bar9 && + git checkout -b master && + test_must_fail git config test.nine && + git checkout -b foo-branch && + echo 9 >expect && + git config test.nine >actual && + test_cmp expect actual +' + +test_expect_success 'conditional include, onbranch, wildcard' ' + echo "[includeIf \"onbranch:?oo-*/**\"]path=bar10" >>.git/config && + echo "[test]ten=10" >.git/bar10 && + git checkout -b not-foo-branch/a && + test_must_fail git config test.ten && + + echo 10 >expect && + git checkout -b foo-branch/a/b/c && + git config test.ten >actual && + test_cmp expect actual && + + git checkout -b moo-bar/a && + git config test.ten >actual && + test_cmp expect actual +' + +test_expect_success 'conditional include, onbranch, implicit /** for /' ' + echo "[includeIf \"onbranch:foo-dir/\"]path=bar11" >>.git/config && + echo "[test]eleven=11" >.git/bar11 && + git checkout -b not-foo-dir/a && + test_must_fail git config test.eleven && + + echo 11 >expect && + git checkout -b foo-dir/a/b/c && + git config test.eleven >actual && + test_cmp expect actual +' + test_expect_success 'include cycles are detected' ' - cat >.gitconfig <<-\EOF && - [test]value = gitconfig - [include]path = cycle - EOF - cat >cycle <<-\EOF && - [test]value = cycle - [include]path = .gitconfig - EOF - cat >expect <<-\EOF && - gitconfig - cycle - EOF - test_must_fail git config --get-all test.value 2>stderr && - test_i18ngrep "exceeded maximum include depth" stderr + git init --bare cycle && + git -C cycle config include.path cycle && + git config -f cycle/cycle include.path config && + test_must_fail \ + env GIT_TEST_GETTEXT_POISON=false \ + git -C cycle config --get-all test.value 2>stderr && + grep "exceeded maximum include depth" stderr ' test_done diff --git a/t/t1309-early-config.sh b/t/t1309-early-config.sh index 413642aa56..3a0de0ddaa 100755 --- a/t/t1309-early-config.sh +++ b/t/t1309-early-config.sh @@ -89,4 +89,14 @@ test_expect_failure 'ignore .git/ with invalid config' ' test_with_config "[" ' +test_expect_success 'early config and onbranch' ' + echo "[broken" >broken && + test_with_config "[includeif \"onbranch:master\"]path=../broken" +' + +test_expect_success 'onbranch config outside of git repo' ' + test_config_global includeIf.onbranch:master.path non-existent && + nongit git help +' + test_done diff --git a/t/t1404-update-ref-errors.sh b/t/t1404-update-ref-errors.sh index 51a4f4c0ac..2d142e5535 100755 --- a/t/t1404-update-ref-errors.sh +++ b/t/t1404-update-ref-errors.sh @@ -32,8 +32,6 @@ test_update_rejected () { test_cmp unchanged actual } -Q="'" - # Test adding and deleting D/F-conflicting references in a single # transaction. df_test() { @@ -93,7 +91,7 @@ df_test() { delname="$delref" fi && cat >expected-err <<-EOF && - fatal: cannot lock ref $Q$addname$Q: $Q$delref$Q exists; cannot create $Q$addref$Q + fatal: cannot lock ref $SQ$addname$SQ: $SQ$delref$SQ exists; cannot create $SQ$addref$SQ EOF $pack && if $add_del @@ -123,7 +121,7 @@ test_expect_success 'existing loose ref is a simple prefix of new' ' prefix=refs/1l && test_update_rejected "a c e" false "b c/x d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" + "$SQ$prefix/c$SQ exists; cannot create $SQ$prefix/c/x$SQ" ' @@ -131,7 +129,7 @@ test_expect_success 'existing packed ref is a simple prefix of new' ' prefix=refs/1p && test_update_rejected "a c e" true "b c/x d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" + "$SQ$prefix/c$SQ exists; cannot create $SQ$prefix/c/x$SQ" ' @@ -139,7 +137,7 @@ test_expect_success 'existing loose ref is a deeper prefix of new' ' prefix=refs/2l && test_update_rejected "a c e" false "b c/x/y d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" + "$SQ$prefix/c$SQ exists; cannot create $SQ$prefix/c/x/y$SQ" ' @@ -147,7 +145,7 @@ test_expect_success 'existing packed ref is a deeper prefix of new' ' prefix=refs/2p && test_update_rejected "a c e" true "b c/x/y d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" + "$SQ$prefix/c$SQ exists; cannot create $SQ$prefix/c/x/y$SQ" ' @@ -155,7 +153,7 @@ test_expect_success 'new ref is a simple prefix of existing loose' ' prefix=refs/3l && test_update_rejected "a c/x e" false "b c d" \ - "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" + "$SQ$prefix/c/x$SQ exists; cannot create $SQ$prefix/c$SQ" ' @@ -163,7 +161,7 @@ test_expect_success 'new ref is a simple prefix of existing packed' ' prefix=refs/3p && test_update_rejected "a c/x e" true "b c d" \ - "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" + "$SQ$prefix/c/x$SQ exists; cannot create $SQ$prefix/c$SQ" ' @@ -171,7 +169,7 @@ test_expect_success 'new ref is a deeper prefix of existing loose' ' prefix=refs/4l && test_update_rejected "a c/x/y e" false "b c d" \ - "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" + "$SQ$prefix/c/x/y$SQ exists; cannot create $SQ$prefix/c$SQ" ' @@ -179,7 +177,7 @@ test_expect_success 'new ref is a deeper prefix of existing packed' ' prefix=refs/4p && test_update_rejected "a c/x/y e" true "b c d" \ - "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" + "$SQ$prefix/c/x/y$SQ exists; cannot create $SQ$prefix/c$SQ" ' @@ -187,7 +185,7 @@ test_expect_success 'one new ref is a simple prefix of another' ' prefix=refs/5 && test_update_rejected "a e" false "b c c/x d" \ - "cannot process $Q$prefix/c$Q and $Q$prefix/c/x$Q at the same time" + "cannot process $SQ$prefix/c$SQ and $SQ$prefix/c/x$SQ at the same time" ' @@ -334,7 +332,7 @@ test_expect_success 'D/F conflict prevents indirect delete long packed + indirec test_expect_success 'missing old value blocks update' ' prefix=refs/missing-update && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/foo$SQ: unable to resolve reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/foo $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -345,7 +343,7 @@ test_expect_success 'incorrect old value blocks update' ' prefix=refs/incorrect-update && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/foo$SQ: is at $C but expected $D EOF printf "%s\n" "update $prefix/foo $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -356,7 +354,7 @@ test_expect_success 'existing old value blocks create' ' prefix=refs/existing-create && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: reference already exists + fatal: cannot lock ref $SQ$prefix/foo$SQ: reference already exists EOF printf "%s\n" "create $prefix/foo $E" | test_must_fail git update-ref --stdin 2>output.err && @@ -367,7 +365,7 @@ test_expect_success 'incorrect old value blocks delete' ' prefix=refs/incorrect-delete && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/foo$SQ: is at $C but expected $D EOF printf "%s\n" "delete $prefix/foo $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -378,7 +376,7 @@ test_expect_success 'missing old value blocks indirect update' ' prefix=refs/missing-indirect-update && git symbolic-ref $prefix/symref $prefix/foo && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/symref$SQ: unable to resolve reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/symref $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -390,7 +388,7 @@ test_expect_success 'incorrect old value blocks indirect update' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: is at $C but expected $D EOF printf "%s\n" "update $prefix/symref $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -402,7 +400,7 @@ test_expect_success 'existing old value blocks indirect create' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: reference already exists + fatal: cannot lock ref $SQ$prefix/symref$SQ: reference already exists EOF printf "%s\n" "create $prefix/symref $E" | test_must_fail git update-ref --stdin 2>output.err && @@ -414,7 +412,7 @@ test_expect_success 'incorrect old value blocks indirect delete' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: is at $C but expected $D EOF printf "%s\n" "delete $prefix/symref $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -425,7 +423,7 @@ test_expect_success 'missing old value blocks indirect no-deref update' ' prefix=refs/missing-noderef-update && git symbolic-ref $prefix/symref $prefix/foo && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: reference is missing but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: reference is missing but expected $D EOF printf "%s\n" "option no-deref" "update $prefix/symref $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -437,7 +435,7 @@ test_expect_success 'incorrect old value blocks indirect no-deref update' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: is at $C but expected $D EOF printf "%s\n" "option no-deref" "update $prefix/symref $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -449,7 +447,7 @@ test_expect_success 'existing old value blocks indirect no-deref create' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: reference already exists + fatal: cannot lock ref $SQ$prefix/symref$SQ: reference already exists EOF printf "%s\n" "option no-deref" "create $prefix/symref $E" | test_must_fail git update-ref --stdin 2>output.err && @@ -461,7 +459,7 @@ test_expect_success 'incorrect old value blocks indirect no-deref delete' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: is at $C but expected $D EOF printf "%s\n" "option no-deref" "delete $prefix/symref $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -474,13 +472,13 @@ test_expect_success 'non-empty directory blocks create' ' : >.git/$prefix/foo/bar/baz.lock && test_when_finished "rm -f .git/$prefix/foo/bar/baz.lock" && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: there is a non-empty directory $Q.git/$prefix/foo$Q blocking reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/foo$SQ: there is a non-empty directory $SQ.git/$prefix/foo$SQ blocking reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/foo $C" | test_must_fail git update-ref --stdin 2>output.err && test_cmp expected output.err && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/foo$SQ: unable to resolve reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/foo $D $C" | test_must_fail git update-ref --stdin 2>output.err && @@ -493,13 +491,13 @@ test_expect_success 'broken reference blocks create' ' echo "gobbledigook" >.git/$prefix/foo && test_when_finished "rm -f .git/$prefix/foo" && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + fatal: cannot lock ref $SQ$prefix/foo$SQ: unable to resolve reference $SQ$prefix/foo$SQ: reference broken EOF printf "%s\n" "update $prefix/foo $C" | test_must_fail git update-ref --stdin 2>output.err && test_cmp expected output.err && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + fatal: cannot lock ref $SQ$prefix/foo$SQ: unable to resolve reference $SQ$prefix/foo$SQ: reference broken EOF printf "%s\n" "update $prefix/foo $D $C" | test_must_fail git update-ref --stdin 2>output.err && @@ -513,13 +511,13 @@ test_expect_success 'non-empty directory blocks indirect create' ' : >.git/$prefix/foo/bar/baz.lock && test_when_finished "rm -f .git/$prefix/foo/bar/baz.lock" && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: there is a non-empty directory $Q.git/$prefix/foo$Q blocking reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/symref$SQ: there is a non-empty directory $SQ.git/$prefix/foo$SQ blocking reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/symref $C" | test_must_fail git update-ref --stdin 2>output.err && test_cmp expected output.err && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/symref$SQ: unable to resolve reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/symref $D $C" | test_must_fail git update-ref --stdin 2>output.err && @@ -532,13 +530,13 @@ test_expect_success 'broken reference blocks indirect create' ' echo "gobbledigook" >.git/$prefix/foo && test_when_finished "rm -f .git/$prefix/foo" && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + fatal: cannot lock ref $SQ$prefix/symref$SQ: unable to resolve reference $SQ$prefix/foo$SQ: reference broken EOF printf "%s\n" "update $prefix/symref $C" | test_must_fail git update-ref --stdin 2>output.err && test_cmp expected output.err && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + fatal: cannot lock ref $SQ$prefix/symref$SQ: unable to resolve reference $SQ$prefix/foo$SQ: reference broken EOF printf "%s\n" "update $prefix/symref $D $C" | test_must_fail git update-ref --stdin 2>output.err && @@ -614,7 +612,23 @@ test_expect_success 'delete fails cleanly if packed-refs file is locked' ' test_when_finished "rm -f .git/packed-refs.lock" && test_must_fail git update-ref -d $prefix/foo >out 2>err && git for-each-ref $prefix >actual && - test_i18ngrep "Unable to create $Q.*packed-refs.lock$Q: File exists" err && + test_i18ngrep "Unable to create $SQ.*packed-refs.lock$SQ: " err && + test_cmp unchanged actual +' + +test_expect_success 'delete fails cleanly if packed-refs.new write fails' ' + # Setup and expectations are similar to the test above. + prefix=refs/failed-packed-refs && + git update-ref $prefix/foo $C && + git pack-refs --all && + git update-ref $prefix/foo $D && + git for-each-ref $prefix >unchanged && + # This should not happen in practice, but it is an easy way to get a + # reliable error (we open with create_tempfile(), which uses O_EXCL). + : >.git/packed-refs.new && + test_when_finished "rm -f .git/packed-refs.new" && + test_must_fail git update-ref -d $prefix/foo && + git for-each-ref $prefix >actual && test_cmp unchanged actual ' diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index ae8a448e34..82950c0282 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -30,14 +30,13 @@ check_fsck () { } corrupt () { - aa=${1%??????????????????????????????????????} zz=${1#??} - mv .git/objects/$aa/$zz .git/$aa$zz + mv .git/objects/$(test_oid_to_path $1) .git/$1 } recover () { - aa=${1%??????????????????????????????????????} zz=${1#??} + aa=$(echo $1 | cut -c 1-2) mkdir -p .git/objects/$aa - mv .git/$aa$zz .git/objects/$aa/$zz + mv .git/$1 .git/objects/$(test_oid_to_path $1) } check_dont_have () { @@ -55,6 +54,7 @@ check_dont_have () { } test_expect_success setup ' + test_oid_init && mkdir -p A/B && echo rat >C && echo ox >A/D && @@ -232,25 +232,34 @@ test_expect_success '--expire=never' ' ' test_expect_success 'gc.reflogexpire=never' ' + test_config gc.reflogexpire never && + test_config gc.reflogexpireunreachable never && + + git reflog expire --verbose --all >output && + test_line_count = 9 output && - git config gc.reflogexpire never && - git config gc.reflogexpireunreachable never && - git reflog expire --verbose --all && git reflog refs/heads/master >output && test_line_count = 4 output ' test_expect_success 'gc.reflogexpire=false' ' + test_config gc.reflogexpire false && + test_config gc.reflogexpireunreachable false && - git config gc.reflogexpire false && - git config gc.reflogexpireunreachable false && git reflog expire --verbose --all && git reflog refs/heads/master >output && - test_line_count = 4 output && + test_line_count = 4 output + +' - git config --unset gc.reflogexpire && - git config --unset gc.reflogexpireunreachable +test_expect_success 'git reflog expire unknown reference' ' + test_config gc.reflogexpire never && + test_config gc.reflogexpireunreachable never && + test_must_fail git reflog expire master@{123} 2>stderr && + test_i18ngrep "points nowhere" stderr && + test_must_fail git reflog expire does-not-exist 2>stderr && + test_i18ngrep "points nowhere" stderr ' test_expect_success 'checkout should not delete log for packed ref' ' @@ -304,12 +313,12 @@ test_expect_success 'stale dirs do not cause d/f conflicts (reflogs off)' ' # Each line is 114 characters, so we need 75 to still have a few before the # last 8K. The 89-character padding on the final entry lines up our # newline exactly. -test_expect_success 'parsing reverse reflogs at BUFSIZ boundaries' ' +test_expect_success SHA1 'parsing reverse reflogs at BUFSIZ boundaries' ' git checkout -b reflogskip && - z38=00000000000000000000000000000000000000 && + zf=$(test_oid zero_2) && ident="abc <xyz> 0000000001 +0000" && for i in $(test_seq 1 75); do - printf "$z38%02d $z38%02d %s\t" $i $(($i+1)) "$ident" && + printf "$zf%02d $zf%02d %s\t" $i $(($i+1)) "$ident" && if test $i = 75; then for j in $(test_seq 1 89); do printf X @@ -320,7 +329,7 @@ test_expect_success 'parsing reverse reflogs at BUFSIZ boundaries' ' printf "\n" done >.git/logs/refs/heads/reflogskip && git rev-parse reflogskip@{73} >actual && - echo ${z38}03 >expect && + echo ${zf}03 >expect && test_cmp expect actual ' diff --git a/t/t1414-reflog-walk.sh b/t/t1414-reflog-walk.sh index feb1efd8ff..1181a9fb28 100755 --- a/t/t1414-reflog-walk.sh +++ b/t/t1414-reflog-walk.sh @@ -18,10 +18,9 @@ do_walk () { git log -g --format="%gd %gs" "$@" } -sq="'" test_expect_success 'set up expected reflog' ' cat >expect.all <<-EOF - HEAD@{0} commit (merge): Merge branch ${sq}master${sq} into side + HEAD@{0} commit (merge): Merge branch ${SQ}master${SQ} into side HEAD@{1} commit: three HEAD@{2} checkout: moving from master to side HEAD@{3} commit: two diff --git a/t/t1415-worktree-refs.sh b/t/t1415-worktree-refs.sh index b664e51250..bb2c7572a3 100755 --- a/t/t1415-worktree-refs.sh +++ b/t/t1415-worktree-refs.sh @@ -76,4 +76,39 @@ test_expect_success 'reflog of worktrees/xx/HEAD' ' test_cmp expected actual.wt2 ' +test_expect_success 'for-each-ref from main repo' ' + mkdir fer1 && + git -C fer1 init repo && + test_commit -C fer1/repo initial && + git -C fer1/repo worktree add ../second && + git -C fer1/repo update-ref refs/bisect/main HEAD && + git -C fer1/repo update-ref refs/rewritten/main HEAD && + git -C fer1/repo update-ref refs/worktree/main HEAD && + git -C fer1/repo for-each-ref --format="%(refname)" | grep main >actual && + cat >expected <<-\EOF && + refs/bisect/main + refs/rewritten/main + refs/worktree/main + EOF + test_cmp expected actual +' + +test_expect_success 'for-each-ref from linked repo' ' + mkdir fer2 && + git -C fer2 init repo && + test_commit -C fer2/repo initial && + git -C fer2/repo worktree add ../second && + git -C fer2/second update-ref refs/bisect/second HEAD && + git -C fer2/second update-ref refs/rewritten/second HEAD && + git -C fer2/second update-ref refs/worktree/second HEAD && + git -C fer2/second for-each-ref --format="%(refname)" | grep second >actual && + cat >expected <<-\EOF && + refs/bisect/second + refs/heads/second + refs/rewritten/second + refs/worktree/second + EOF + test_cmp expected actual +' + test_done diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index c61f972141..b36e0528d0 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -9,6 +9,7 @@ test_description='git fsck random collection of tests . ./test-lib.sh test_expect_success setup ' + test_oid_init && git config gc.auto 0 && git config i18n.commitencoding ISO-8859-1 && test_commit A fileA one && @@ -54,8 +55,8 @@ test_expect_success 'setup: helpers for corruption tests' ' test_expect_success 'object with bad sha1' ' sha=$(echo blob | git hash-object -w --stdin) && - old=$(echo $sha | sed "s+^..+&/+") && - new=$(dirname $old)/ffffffffffffffffffffffffffffffffffffff && + old=$(test_oid_to_path "$sha") && + new=$(dirname $old)/$(test_oid ff_2) && sha="$(dirname $new)$(basename $new)" && mv .git/objects/$old .git/objects/$new && test_when_finished "remove_object $sha" && @@ -84,7 +85,7 @@ test_expect_success 'branch pointing to non-commit' ' test_expect_success 'HEAD link pointing at a funny object' ' test_when_finished "mv .git/SAVED_HEAD .git/HEAD" && mv .git/HEAD .git/SAVED_HEAD && - echo 0000000000000000000000000000000000000000 >.git/HEAD && + echo $ZERO_OID >.git/HEAD && # avoid corrupt/broken HEAD from interfering with repo discovery test_must_fail env GIT_DIR=.git git fsck 2>out && cat out && @@ -244,10 +245,16 @@ test_expect_success 'tree object with duplicate entries' ' ' test_expect_success 'unparseable tree object' ' + test_oid_cache <<-\EOF && + junk sha1:twenty-bytes-of-junk + junk sha256:twenty-bytes-of-junk-twelve-more + EOF + test_when_finished "git update-ref -d refs/heads/wrong" && test_when_finished "remove_object \$tree_sha1" && test_when_finished "remove_object \$commit_sha1" && - tree_sha1=$(printf "100644 \0twenty-bytes-of-junk" | git hash-object -t tree --stdin -w --literally) && + junk=$(test_oid junk) && + tree_sha1=$(printf "100644 \0$junk" | git hash-object -t tree --stdin -w --literally) && commit_sha1=$(git commit-tree $tree_sha1) && git update-ref refs/heads/wrong $commit_sha1 && test_must_fail git fsck 2>out && @@ -256,10 +263,6 @@ test_expect_success 'unparseable tree object' ' test_i18ngrep ! "fatal: empty filename in tree entry" out ' -hex2oct() { - perl -ne 'printf "\\%03o", hex for /../g' -} - test_expect_success 'tree entry with type mismatch' ' test_when_finished "remove_object \$blob" && test_when_finished "remove_object \$tree" && @@ -279,8 +282,9 @@ test_expect_success 'tree entry with type mismatch' ' ' test_expect_success 'tag pointing to nonexistent' ' - cat >invalid-tag <<-\EOF && - object ffffffffffffffffffffffffffffffffffffffff + badoid=$(test_oid deadbeef) && + cat >invalid-tag <<-EOF && + object $badoid type commit tag invalid tagger T A Gger <tagger@example.com> 1234567890 -0000 @@ -390,8 +394,8 @@ test_expect_success 'rev-list --verify-objects' ' test_expect_success 'rev-list --verify-objects with bad sha1' ' sha=$(echo blob | git hash-object -w --stdin) && - old=$(echo $sha | sed "s+^..+&/+") && - new=$(dirname $old)/ffffffffffffffffffffffffffffffffffffff && + old=$(test_oid_to_path $sha) && + new=$(dirname $old)/$(test_oid ff_2) && sha="$(dirname $new)$(basename $new)" && mv .git/objects/$old .git/objects/$new && test_when_finished "remove_object $sha" && @@ -406,7 +410,7 @@ test_expect_success 'rev-list --verify-objects with bad sha1' ' test_might_fail git rev-list --verify-objects refs/heads/bogus >/dev/null 2>out && cat out && - test_i18ngrep -q "error: hash mismatch 63ffffffffffffffffffffffffffffffffffffff" out + test_i18ngrep -q "error: hash mismatch $(dirname $new)$(test_oid ff_2)" out ' test_expect_success 'force fsck to ignore double author' ' @@ -421,13 +425,12 @@ test_expect_success 'force fsck to ignore double author' ' ' _bz='\0' -_bz5="$_bz$_bz$_bz$_bz$_bz" -_bz20="$_bz5$_bz5$_bz5$_bz5" +_bzoid=$(printf $ZERO_OID | sed -e 's/00/\\0/g') test_expect_success 'fsck notices blob entry pointing to null sha1' ' (git init null-blob && cd null-blob && - sha=$(printf "100644 file$_bz$_bz20" | + sha=$(printf "100644 file$_bz$_bzoid" | git hash-object -w --stdin -t tree) && git fsck 2>out && cat out && @@ -438,7 +441,7 @@ test_expect_success 'fsck notices blob entry pointing to null sha1' ' test_expect_success 'fsck notices submodule entry pointing to null sha1' ' (git init null-commit && cd null-commit && - sha=$(printf "160000 submodule$_bz$_bz20" | + sha=$(printf "160000 submodule$_bz$_bzoid" | git hash-object -w --stdin -t tree) && git fsck 2>out && cat out && @@ -590,7 +593,7 @@ test_expect_success 'fsck --connectivity-only' ' # its type. That lets us see that --connectivity-only is # not actually looking at the contents, but leaves it # free to examine the type if it chooses. - empty=.git/objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391 && + empty=.git/objects/$(test_oid_to_path $EMPTY_BLOB) && blob=$(echo unrelated | git hash-object -w --stdin) && mv -f $(sha1_file $blob) $empty && @@ -635,10 +638,12 @@ test_expect_success 'fsck --name-objects' ' test_expect_success 'alternate objects are correctly blamed' ' test_when_finished "rm -rf alt.git .git/objects/info/alternates" && + name=$(test_oid numeric) && + path=$(test_oid_to_path "$name") && git init --bare alt.git && echo "../../alt.git/objects" >.git/objects/info/alternates && - mkdir alt.git/objects/12 && - >alt.git/objects/12/34567890123456789012345678901234567890 && + mkdir alt.git/objects/$(dirname $path) && + >alt.git/objects/$(dirname $path)/$(basename $path) && test_must_fail git fsck >out 2>&1 && test_i18ngrep alt.git out ' @@ -740,7 +745,7 @@ test_expect_success 'fsck detects truncated loose object' ' # for each of type, we have one version which is referenced by another object # (and so while unreachable, not dangling), and another variant which really is # dangling. -test_expect_success 'fsck notices dangling objects' ' +test_expect_success 'create dangling-object repository' ' git init dangling && ( cd dangling && @@ -751,12 +756,17 @@ test_expect_success 'fsck notices dangling objects' ' commit=$(git commit-tree $tree) && dcommit=$(git commit-tree -p $commit $tree) && - cat >expect <<-EOF && + cat >expect <<-EOF dangling blob $dblob dangling commit $dcommit dangling tree $dtree EOF + ) +' +test_expect_success 'fsck notices dangling objects' ' + ( + cd dangling && git fsck >actual && # the output order is non-deterministic, as it comes from a hash sort <actual >actual.sorted && @@ -764,6 +774,16 @@ test_expect_success 'fsck notices dangling objects' ' ) ' +test_expect_success 'fsck --connectivity-only notices dangling objects' ' + ( + cd dangling && + git fsck --connectivity-only >actual && + # the output order is non-deterministic, as it comes from a hash + sort <actual >actual.sorted && + test_i18ncmp expect actual.sorted + ) +' + test_expect_success 'fsck $name notices bogus $name' ' test_must_fail git fsck bogus && test_must_fail git fsck $ZERO_OID diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 4ee009da66..21a9c8ffb2 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -8,10 +8,9 @@ exec </dev/null test_did_you_mean () { - sq="'" && cat >expected <<-EOF && - fatal: Path '$2$3' $4, but not ${5:-$sq$3$sq}. - Did you mean '$1:$2$3'${2:+ aka $sq$1:./$3$sq}? + fatal: Path '$2$3' $4, but not ${5:-$SQ$3$SQ}. + Did you mean '$1:$2$3'${2:+ aka $SQ$1:./$3$SQ}? EOF test_cmp expected error } diff --git a/t/t1507-rev-parse-upstream.sh b/t/t1507-rev-parse-upstream.sh index fa3e499641..8b4cf8a6e3 100755 --- a/t/t1507-rev-parse-upstream.sh +++ b/t/t1507-rev-parse-upstream.sh @@ -28,8 +28,6 @@ test_expect_success 'setup' ' ) ' -sq="'" - full_name () { (cd clone && git rev-parse --symbolic-full-name "$@") @@ -129,7 +127,7 @@ test_expect_success 'merge my-side@{u} records the correct name' ' git branch -t new my-side@{u} && git merge -s ours new@{u} && git show -s --pretty=tformat:%s >actual && - echo "Merge remote-tracking branch ${sq}origin/side${sq}" >expect && + echo "Merge remote-tracking branch ${SQ}origin/side${SQ}" >expect && test_cmp expect actual ) ' @@ -156,7 +154,7 @@ test_expect_success 'branch@{u} works when tracking a local branch' ' test_expect_success 'branch@{u} error message when no upstream' ' cat >expect <<-EOF && - fatal: no upstream configured for branch ${sq}non-tracking${sq} + fatal: no upstream configured for branch ${SQ}non-tracking${SQ} EOF error_message non-tracking@{u} && test_i18ncmp expect error @@ -164,7 +162,7 @@ test_expect_success 'branch@{u} error message when no upstream' ' test_expect_success '@{u} error message when no upstream' ' cat >expect <<-EOF && - fatal: no upstream configured for branch ${sq}master${sq} + fatal: no upstream configured for branch ${SQ}master${SQ} EOF test_must_fail git rev-parse --verify @{u} 2>actual && test_i18ncmp expect actual @@ -172,7 +170,7 @@ test_expect_success '@{u} error message when no upstream' ' test_expect_success 'branch@{u} error message with misspelt branch' ' cat >expect <<-EOF && - fatal: no such branch: ${sq}no-such-branch${sq} + fatal: no such branch: ${SQ}no-such-branch${SQ} EOF error_message no-such-branch@{u} && test_i18ncmp expect error @@ -189,7 +187,7 @@ test_expect_success '@{u} error message when not on a branch' ' test_expect_success 'branch@{u} error message if upstream branch not fetched' ' cat >expect <<-EOF && - fatal: upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch + fatal: upstream branch ${SQ}refs/heads/side${SQ} not stored as a remote-tracking branch EOF error_message bad-upstream@{u} && test_i18ncmp expect error diff --git a/t/t1600-index.sh b/t/t1600-index.sh index 42962ed7d4..c77721b580 100755 --- a/t/t1600-index.sh +++ b/t/t1600-index.sh @@ -59,17 +59,38 @@ test_expect_success 'out of bounds index.version issues warning' ' ) ' -test_expect_success 'GIT_INDEX_VERSION takes precedence over config' ' +test_index_version () { + INDEX_VERSION_CONFIG=$1 && + FEATURE_MANY_FILES=$2 && + ENV_VAR_VERSION=$3 + EXPECTED_OUTPUT_VERSION=$4 && ( rm -f .git/index && - GIT_INDEX_VERSION=4 && - export GIT_INDEX_VERSION && - git config --add index.version 2 && + rm -f .git/config && + if test "$INDEX_VERSION_CONFIG" -ne 0 + then + git config --add index.version $INDEX_VERSION_CONFIG + fi && + git config --add feature.manyFiles $FEATURE_MANY_FILES + if test "$ENV_VAR_VERSION" -ne 0 + then + GIT_INDEX_VERSION=$ENV_VAR_VERSION && + export GIT_INDEX_VERSION + else + unset GIT_INDEX_VERSION + fi && git add a 2>&1 && - echo 4 >expect && + echo $EXPECTED_OUTPUT_VERSION >expect && test-tool index-version <.git/index >actual && test_cmp expect actual ) +} + +test_expect_success 'index version config precedence' ' + test_index_version 2 false 4 4 && + test_index_version 2 true 0 2 && + test_index_version 0 true 0 4 && + test_index_version 0 true 2 2 ' test_done diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index 4667e1a190..12a5568844 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -20,6 +20,22 @@ create_non_racy_file () { test-tool chmtime =-5 "$1" } +test_expect_success 'setup' ' + test_oid_cache <<-EOF + own_v3 sha1:8299b0bcd1ac364e5f1d7768efb62fa2da79a339 + own_v3 sha256:38a6d2925e3eceec33ad7b34cbff4e0086caa0daf28f31e51f5bd94b4a7af86b + + base_v3 sha1:39d890139ee5356c7ef572216cebcd27aa41f9df + base_v3 sha256:c9baeadf905112bf6c17aefbd7d02267afd70ded613c30cafed2d40cb506e1ed + + own_v4 sha1:432ef4b63f32193984f339431fd50ca796493569 + own_v4 sha256:6738ac6319c25b694afa7bcc313deb182d1a59b68bf7a47b4296de83478c0420 + + base_v4 sha1:508851a7f0dfa8691e9f69c7f055865389012491 + base_v4 sha256:3177d4adfdd4b6904f7e921d91d715a471c0dde7cf6a4bba574927f02b699508 + EOF +' + test_expect_success 'enable split index' ' git config splitIndex.maxPercentChange 100 && git update-index --split-index && @@ -29,11 +45,11 @@ test_expect_success 'enable split index' ' # NEEDSWORK: Stop hard-coding checksums. if test "$indexversion" = "4" then - own=432ef4b63f32193984f339431fd50ca796493569 - base=508851a7f0dfa8691e9f69c7f055865389012491 + own=$(test_oid own_v4) + base=$(test_oid base_v4) else - own=8299b0bcd1ac364e5f1d7768efb62fa2da79a339 - base=39d890139ee5356c7ef572216cebcd27aa41f9df + own=$(test_oid own_v3) + base=$(test_oid base_v3) fi && cat >expect <<-EOF && @@ -99,17 +115,18 @@ test_expect_success 'enable split index again, "one" now belongs to base index"' test_expect_success 'modify original file, base index untouched' ' echo modified | create_non_racy_file one && + file1_blob=$(git hash-object one) && git update-index one && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one + 100644 $file1_blob 0 one EOF test_cmp ls-files.expect ls-files.actual && test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q + 100644 $file1_blob 0Q replacements: 0 deletions: EOF @@ -121,7 +138,7 @@ test_expect_success 'add another file, which stays index' ' git update-index --add two && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one + 100644 $file1_blob 0 one 100644 $EMPTY_BLOB 0 two EOF test_cmp ls-files.expect ls-files.actual && @@ -129,7 +146,7 @@ test_expect_success 'add another file, which stays index' ' test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q + 100644 $file1_blob 0Q 100644 $EMPTY_BLOB 0 two replacements: 0 deletions: @@ -141,14 +158,14 @@ test_expect_success 'remove file not in base index' ' git update-index --force-remove two && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one + 100644 $file1_blob 0 one EOF test_cmp ls-files.expect ls-files.actual && test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q + 100644 $file1_blob 0Q replacements: 0 deletions: EOF @@ -237,9 +254,9 @@ test_expect_success 'set core.splitIndex config variable to true' ' git update-index --add three && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 three - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two + 100644 $EMPTY_BLOB 0 one + 100644 $EMPTY_BLOB 0 three + 100644 $EMPTY_BLOB 0 two EOF test_cmp ls-files.expect ls-files.actual && BASE=$(test-tool dump-split-index .git/index | grep "^base") && @@ -257,8 +274,8 @@ test_expect_success 'set core.splitIndex config variable to false' ' git update-index --force-remove three && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two + 100644 $EMPTY_BLOB 0 one + 100644 $EMPTY_BLOB 0 two EOF test_cmp ls-files.expect ls-files.actual && test-tool dump-split-index .git/index | sed "/^own/d" >actual && @@ -285,7 +302,7 @@ test_expect_success 'set core.splitIndex config variable back to true' ' test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 four + 100644 $EMPTY_BLOB 0 four replacements: deletions: EOF @@ -309,7 +326,7 @@ test_expect_success 'check behavior with splitIndex.maxPercentChange unset' ' test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 six + 100644 $EMPTY_BLOB 0 six replacements: deletions: EOF @@ -472,4 +489,22 @@ test_expect_success 'writing split index with null sha1 does not write cache tre test_line_count = 0 cache-tree.out ' +test_expect_success 'do not refresh null base index' ' + test_create_repo merge && + ( + cd merge && + test_commit initial && + git checkout -b side-branch && + test_commit extra && + git checkout master && + git update-index --split-index && + test_commit more && + # must not write a new shareindex, or we wont catch the problem + git -c splitIndex.maxPercentChange=100 merge --no-edit side-branch 2>err && + # i.e. do not expect warnings like + # could not freshen shared index .../shareindex.00000... + test_must_be_empty err + ) +' + test_done diff --git a/t/t2014-switch.sh b/t/t2014-checkout-switch.sh index ccfb147113..ccfb147113 100755 --- a/t/t2014-switch.sh +++ b/t/t2014-checkout-switch.sh diff --git a/t/t2018-checkout-branch.sh b/t/t2018-checkout-branch.sh index c5014ad9a6..822381dd9d 100755 --- a/t/t2018-checkout-branch.sh +++ b/t/t2018-checkout-branch.sh @@ -60,38 +60,47 @@ test_expect_success 'setup' ' ' test_expect_success 'checkout -b to a new branch, set to HEAD' ' + test_when_finished " + git checkout branch1 && + test_might_fail git branch -D branch2" && do_checkout branch2 ' -test_expect_success 'checkout -b to a new branch, set to an explicit ref' ' - git checkout branch1 && - git branch -D branch2 && +test_expect_success 'checkout -b to a merge base' ' + test_when_finished " + git checkout branch1 && + test_might_fail git branch -D branch2" && + git checkout -b branch2 branch1... +' +test_expect_success 'checkout -b to a new branch, set to an explicit ref' ' + test_when_finished " + git checkout branch1 && + test_might_fail git branch -D branch2" && do_checkout branch2 $HEAD1 ' test_expect_success 'checkout -b to a new branch with unmergeable changes fails' ' - git checkout branch1 && - - # clean up from previous test - git branch -D branch2 && - setup_dirty_unmergeable && test_must_fail do_checkout branch2 $HEAD1 && test_dirty_unmergeable ' test_expect_success 'checkout -f -b to a new branch with unmergeable changes discards changes' ' + test_when_finished " + git checkout branch1 && + test_might_fail git branch -D branch2" && + # still dirty and on branch1 do_checkout branch2 $HEAD1 "-f -b" && test_must_fail test_dirty_unmergeable ' test_expect_success 'checkout -b to a new branch preserves mergeable changes' ' - git checkout branch1 && - - # clean up from previous test - git branch -D branch2 && + test_when_finished " + git reset --hard && + git checkout branch1 && + test_might_fail git branch -D branch2" && setup_dirty_mergeable && do_checkout branch2 $HEAD1 && @@ -99,27 +108,18 @@ test_expect_success 'checkout -b to a new branch preserves mergeable changes' ' ' test_expect_success 'checkout -f -b to a new branch with mergeable changes discards changes' ' - # clean up from previous test - git reset --hard && - - git checkout branch1 && - - # clean up from previous test - git branch -D branch2 && - + test_when_finished git reset --hard HEAD && setup_dirty_mergeable && do_checkout branch2 $HEAD1 "-f -b" && test_must_fail test_dirty_mergeable ' test_expect_success 'checkout -b to an existing branch fails' ' - git reset --hard HEAD && - + test_when_finished git reset --hard HEAD && test_must_fail do_checkout branch2 $HEAD2 ' test_expect_success 'checkout -b to @{-1} fails with the right branch name' ' - git reset --hard HEAD && git checkout branch1 && git checkout branch2 && echo >expect "fatal: A branch named '\''branch1'\'' already exists." && @@ -133,6 +133,12 @@ test_expect_success 'checkout -B to an existing branch resets branch to HEAD' ' do_checkout branch2 "" -B ' +test_expect_success 'checkout -B to a merge base' ' + git checkout branch1 && + + git checkout -B branch2 branch1... +' + test_expect_success 'checkout -B to an existing branch from detached HEAD resets branch to HEAD' ' git checkout $(git rev-parse --verify HEAD) && @@ -160,6 +166,7 @@ test_expect_success 'checkout -f -B to an existing branch with unmergeable chang ' test_expect_success 'checkout -B to an existing branch preserves mergeable changes' ' + test_when_finished git reset --hard && git checkout branch1 && setup_dirty_mergeable && @@ -168,9 +175,6 @@ test_expect_success 'checkout -B to an existing branch preserves mergeable chang ' test_expect_success 'checkout -f -B to an existing branch with mergeable changes discards changes' ' - # clean up from previous test - git reset --hard && - git checkout branch1 && setup_dirty_mergeable && diff --git a/t/t2020-checkout-detach.sh b/t/t2020-checkout-detach.sh index 1fa670625c..b748db9946 100755 --- a/t/t2020-checkout-detach.sh +++ b/t/t2020-checkout-detach.sh @@ -195,16 +195,22 @@ test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not as # The first detach operation is more chatty than the following ones. cat >1st_detach <<-EOF && - Note: checking out 'HEAD^'. + Note: switching to 'HEAD^'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this - state without impacting any branches by performing another checkout. + state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may - do so (now or later) by using -b with the checkout command again. Example: + do so (now or later) by using -c with the switch command. Example: - git checkout -b <new-branch-name> + git switch -c <new-branch-name> + + Or undo this operation with: + + git switch - + + Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at \$commit three EOF @@ -271,16 +277,22 @@ test_expect_success 'describe_detached_head does print SHA-1 ellipsis when asked # The first detach operation is more chatty than the following ones. cat >1st_detach <<-EOF && - Note: checking out 'HEAD^'. + Note: switching to 'HEAD^'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this - state without impacting any branches by performing another checkout. + state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may - do so (now or later) by using -b with the checkout command again. Example: + do so (now or later) by using -c with the switch command. Example: + + git switch -c <new-branch-name> + + Or undo this operation with: + + git switch - - git checkout -b <new-branch-name> + Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at \$commit... three EOF diff --git a/t/t2022-checkout-paths.sh b/t/t2022-checkout-paths.sh index fc3eb43b89..6844afafc0 100755 --- a/t/t2022-checkout-paths.sh +++ b/t/t2022-checkout-paths.sh @@ -78,4 +78,15 @@ test_expect_success 'do not touch files that are already up-to-date' ' test_cmp expect actual ' +test_expect_success 'checkout HEAD adds deleted intent-to-add file back to index' ' + echo "nonempty" >nonempty && + >empty && + git add nonempty empty && + git commit -m "create files to be deleted" && + git rm --cached nonempty empty && + git add -N nonempty empty && + git checkout HEAD nonempty empty && + git diff --cached --exit-code +' + test_done diff --git a/t/t2023-checkout-m.sh b/t/t2023-checkout-m.sh index 7e18985134..fca3f85824 100755 --- a/t/t2023-checkout-m.sh +++ b/t/t2023-checkout-m.sh @@ -46,4 +46,28 @@ test_expect_success '-m restores 3-way conflicted+resolved file' ' test_cmp both.txt.conflicted.cleaned both.txt.cleaned ' +test_expect_success 'force checkout a conflict file creates stage zero entry' ' + git init co-force && + ( + cd co-force && + echo a >a && + git add a && + git commit -ama && + A_OBJ=$(git rev-parse :a) && + git branch topic && + echo b >a && + git commit -amb && + B_OBJ=$(git rev-parse :a) && + git checkout topic && + echo c >a && + C_OBJ=$(git hash-object a) && + git checkout -m master && + test_cmp_rev :1:a $A_OBJ && + test_cmp_rev :2:a $B_OBJ && + test_cmp_rev :3:a $C_OBJ && + git checkout -f topic && + test_cmp_rev :0:a $A_OBJ + ) +' + test_done diff --git a/t/t2025-checkout-no-overlay.sh b/t/t2025-checkout-no-overlay.sh new file mode 100755 index 0000000000..76330cb5ab --- /dev/null +++ b/t/t2025-checkout-no-overlay.sh @@ -0,0 +1,47 @@ +#!/bin/sh + +test_description='checkout --no-overlay <tree-ish> -- <pathspec>' + +. ./test-lib.sh + +test_expect_success 'setup' ' + git commit --allow-empty -m "initial" +' + +test_expect_success 'checkout --no-overlay deletes files not in <tree-ish>' ' + >file && + mkdir dir && + >dir/file1 && + git add file dir/file1 && + git checkout --no-overlay HEAD -- file && + test_path_is_missing file && + test_path_is_file dir/file1 +' + +test_expect_success 'checkout --no-overlay removing last file from directory' ' + git checkout --no-overlay HEAD -- dir/file1 && + test_path_is_missing dir +' + +test_expect_success 'checkout -p --overlay is disallowed' ' + test_must_fail git checkout -p --overlay HEAD 2>actual && + test_i18ngrep "fatal: -p and --overlay are mutually exclusive" actual +' + +test_expect_success '--no-overlay --theirs with D/F conflict deletes file' ' + test_commit file1 file1 && + test_commit file2 file2 && + git rm --cached file1 && + echo 1234 >file1 && + F1=$(git rev-parse HEAD:file1) && + F2=$(git rev-parse HEAD:file2) && + { + echo "100644 $F1 1 file1" && + echo "100644 $F2 2 file1" + } | git update-index --index-info && + test_path_is_file file1 && + git checkout --theirs --no-overlay -- file1 && + test_path_is_missing file1 +' + +test_done diff --git a/t/t2060-switch.sh b/t/t2060-switch.sh new file mode 100755 index 0000000000..f9efa29dfb --- /dev/null +++ b/t/t2060-switch.sh @@ -0,0 +1,96 @@ +#!/bin/sh + +test_description='switch basic functionality' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit first && + git branch first-branch && + test_commit second && + test_commit third && + git remote add origin nohost:/nopath && + git update-ref refs/remotes/origin/foo first-branch +' + +test_expect_success 'switch branch no arguments' ' + test_must_fail git switch +' + +test_expect_success 'switch branch' ' + git switch first-branch && + test_path_is_missing second.t +' + +test_expect_success 'switch and detach' ' + test_when_finished git switch master && + test_must_fail git switch master^{commit} && + git switch --detach master^{commit} && + test_must_fail git symbolic-ref HEAD +' + +test_expect_success 'switch and detach current branch' ' + test_when_finished git switch master && + git switch master && + git switch --detach && + test_must_fail git symbolic-ref HEAD +' + +test_expect_success 'switch and create branch' ' + test_when_finished git switch master && + git switch -c temp master^ && + test_cmp_rev master^ refs/heads/temp && + echo refs/heads/temp >expected-branch && + git symbolic-ref HEAD >actual-branch && + test_cmp expected-branch actual-branch +' + +test_expect_success 'force create branch from HEAD' ' + test_when_finished git switch master && + git switch --detach master && + test_must_fail git switch -c temp && + git switch -C temp && + test_cmp_rev master refs/heads/temp && + echo refs/heads/temp >expected-branch && + git symbolic-ref HEAD >actual-branch && + test_cmp expected-branch actual-branch +' + +test_expect_success 'new orphan branch from empty' ' + test_when_finished git switch master && + test_must_fail git switch --orphan new-orphan HEAD && + git switch --orphan new-orphan && + test_commit orphan && + git cat-file commit refs/heads/new-orphan >commit && + ! grep ^parent commit && + git ls-files >tracked-files && + echo orphan.t >expected && + test_cmp expected tracked-files +' + +test_expect_success 'switching ignores file of same branch name' ' + test_when_finished git switch master && + : >first-branch && + git switch first-branch && + echo refs/heads/first-branch >expected && + git symbolic-ref HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'guess and create branch ' ' + test_when_finished git switch master && + test_must_fail git switch --no-guess foo && + git switch foo && + echo refs/heads/foo >expected && + git symbolic-ref HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'not switching when something is in progress' ' + test_when_finished rm -f .git/MERGE_HEAD && + # fake a merge-in-progress + cp .git/HEAD .git/MERGE_HEAD && + test_must_fail git switch -d @^ +' + +test_done diff --git a/t/t2070-restore.sh b/t/t2070-restore.sh new file mode 100755 index 0000000000..21c3f84459 --- /dev/null +++ b/t/t2070-restore.sh @@ -0,0 +1,109 @@ +#!/bin/sh + +test_description='restore basic functionality' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit first && + echo first-and-a-half >>first.t && + git add first.t && + test_commit second && + echo one >one && + echo two >two && + echo untracked >untracked && + echo ignored >ignored && + echo /ignored >.gitignore && + git add one two .gitignore && + git update-ref refs/heads/one master +' + +test_expect_success 'restore without pathspec is not ok' ' + test_must_fail git restore && + test_must_fail git restore --source=first +' + +test_expect_success 'restore a file, ignoring branch of same name' ' + cat one >expected && + echo dirty >>one && + git restore one && + test_cmp expected one +' + +test_expect_success 'restore a file on worktree from another ref' ' + test_when_finished git reset --hard && + git cat-file blob first:./first.t >expected && + git restore --source=first first.t && + test_cmp expected first.t && + git cat-file blob HEAD:./first.t >expected && + git show :first.t >actual && + test_cmp expected actual +' + +test_expect_success 'restore a file in the index from another ref' ' + test_when_finished git reset --hard && + git cat-file blob first:./first.t >expected && + git restore --source=first --staged first.t && + git show :first.t >actual && + test_cmp expected actual && + git cat-file blob HEAD:./first.t >expected && + test_cmp expected first.t +' + +test_expect_success 'restore a file in both the index and worktree from another ref' ' + test_when_finished git reset --hard && + git cat-file blob first:./first.t >expected && + git restore --source=first --staged --worktree first.t && + git show :first.t >actual && + test_cmp expected actual && + test_cmp expected first.t +' + +test_expect_success 'restore --staged uses HEAD as source' ' + test_when_finished git reset --hard && + git cat-file blob :./first.t >expected && + echo index-dirty >>first.t && + git add first.t && + git restore --staged first.t && + git cat-file blob :./first.t >actual && + test_cmp expected actual +' + +test_expect_success 'restore --ignore-unmerged ignores unmerged entries' ' + git init unmerged && + ( + cd unmerged && + echo one >unmerged && + echo one >common && + git add unmerged common && + git commit -m common && + git switch -c first && + echo first >unmerged && + git commit -am first && + git switch -c second master && + echo second >unmerged && + git commit -am second && + test_must_fail git merge first && + + echo dirty >>common && + test_must_fail git restore . && + + git restore --ignore-unmerged --quiet . >output 2>&1 && + git diff common >diff-output && + test_must_be_empty output && + test_must_be_empty diff-output + ) +' + +test_expect_success 'restore --staged adds deleted intent-to-add file back to index' ' + echo "nonempty" >nonempty && + >empty && + git add nonempty empty && + git commit -m "create files to be deleted" && + git rm --cached nonempty empty && + git add -N nonempty empty && + git restore --staged nonempty empty && + git diff --cached --exit-code +' + +test_done diff --git a/t/t2071-restore-patch.sh b/t/t2071-restore-patch.sh new file mode 100755 index 0000000000..98b2476e7c --- /dev/null +++ b/t/t2071-restore-patch.sh @@ -0,0 +1,110 @@ +#!/bin/sh + +test_description='git restore --patch' + +. ./lib-patch-mode.sh + +test_expect_success PERL 'setup' ' + mkdir dir && + echo parent >dir/foo && + echo dummy >bar && + git add bar dir/foo && + git commit -m initial && + test_tick && + test_commit second dir/foo head && + set_and_save_state bar bar_work bar_index && + save_head +' + +test_expect_success PERL 'restore -p without pathspec is fine' ' + echo q >cmd && + git restore -p <cmd +' + +# note: bar sorts before dir/foo, so the first 'n' is always to skip 'bar' + +test_expect_success PERL 'saying "n" does nothing' ' + set_and_save_state dir/foo work head && + test_write_lines n n | git restore -p && + verify_saved_state bar && + verify_saved_state dir/foo +' + +test_expect_success PERL 'git restore -p' ' + set_and_save_state dir/foo work head && + test_write_lines n y | git restore -p && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'git restore -p with staged changes' ' + set_state dir/foo work index && + test_write_lines n y | git restore -p && + verify_saved_state bar && + verify_state dir/foo index index +' + +test_expect_success PERL 'git restore -p --source=HEAD' ' + set_state dir/foo work index && + # the third n is to get out in case it mistakenly does not apply + test_write_lines n y n | git restore -p --source=HEAD && + verify_saved_state bar && + verify_state dir/foo head index +' + +test_expect_success PERL 'git restore -p --source=HEAD^' ' + set_state dir/foo work index && + # the third n is to get out in case it mistakenly does not apply + test_write_lines n y n | git restore -p --source=HEAD^ && + verify_saved_state bar && + verify_state dir/foo parent index +' + +test_expect_success PERL 'git restore -p handles deletion' ' + set_state dir/foo work index && + rm dir/foo && + test_write_lines n y | git restore -p && + verify_saved_state bar && + verify_state dir/foo index index +' + +# The idea in the rest is that bar sorts first, so we always say 'y' +# first and if the path limiter fails it'll apply to bar instead of +# dir/foo. There's always an extra 'n' to reject edits to dir/foo in +# the failure case (and thus get out of the loop). + +test_expect_success PERL 'path limiting works: dir' ' + set_state dir/foo work head && + test_write_lines y n | git restore -p dir && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'path limiting works: -- dir' ' + set_state dir/foo work head && + test_write_lines y n | git restore -p -- dir && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'path limiting works: HEAD^ -- dir' ' + set_state dir/foo work head && + # the third n is to get out in case it mistakenly does not apply + test_write_lines y n n | git restore -p --source=HEAD^ -- dir && + verify_saved_state bar && + verify_state dir/foo parent head +' + +test_expect_success PERL 'path limiting works: foo inside dir' ' + set_state dir/foo work head && + # the third n is to get out in case it mistakenly does not apply + test_write_lines y n n | (cd dir && git restore -p foo) && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'none of this moved HEAD' ' + verify_saved_head +' + +test_done diff --git a/t/t2203-add-intent.sh b/t/t2203-add-intent.sh index 68e54d5c44..5bbe8dcce4 100755 --- a/t/t2203-add-intent.sh +++ b/t/t2203-add-intent.sh @@ -247,12 +247,14 @@ test_expect_success 'diff-files/diff-cached shows ita as new/not-new files' ' test_expect_success '"diff HEAD" includes ita as new files' ' git reset --hard && echo new >new-ita && + oid=$(git hash-object new-ita) && + oid=$(git rev-parse --short $oid) && git add -N new-ita && git diff HEAD >actual && - cat >expected <<-\EOF && + cat >expected <<-EOF && diff --git a/new-ita b/new-ita new file mode 100644 - index 0000000..3e75765 + index 0000000..$oid --- /dev/null +++ b/new-ita @@ -0,0 +1 @@ diff --git a/t/t2025-worktree-add.sh b/t/t2400-worktree-add.sh index 286bba35d8..e819ba741e 100755 --- a/t/t2025-worktree-add.sh +++ b/t/t2400-worktree-add.sh @@ -570,4 +570,21 @@ test_expect_success '"add" an existing locked but missing worktree' ' git worktree add --force --force --detach gnoo ' +test_expect_success FUNNYNAMES 'sanitize generated worktree name' ' + git worktree add --detach ". weird*..?.lock.lock" && + test -d .git/worktrees/---weird-.- +' + +test_expect_success '"add" should not fail because of another bad worktree' ' + git init add-fail && + ( + cd add-fail && + test_commit first && + mkdir sub && + git worktree add sub/to-be-deleted && + rm -rf sub && + git worktree add second + ) +' + test_done diff --git a/t/t2026-worktree-prune.sh b/t/t2401-worktree-prune.sh index b7d6d5d45a..b7d6d5d45a 100755 --- a/t/t2026-worktree-prune.sh +++ b/t/t2401-worktree-prune.sh diff --git a/t/t2027-worktree-list.sh b/t/t2402-worktree-list.sh index bb6fb9b12c..bb6fb9b12c 100755 --- a/t/t2027-worktree-list.sh +++ b/t/t2402-worktree-list.sh diff --git a/t/t2028-worktree-move.sh b/t/t2403-worktree-move.sh index 939d18d728..939d18d728 100755 --- a/t/t2028-worktree-move.sh +++ b/t/t2403-worktree-move.sh diff --git a/t/t2029-worktree-config.sh b/t/t2404-worktree-config.sh index 286121d8de..286121d8de 100755 --- a/t/t2029-worktree-config.sh +++ b/t/t2404-worktree-config.sh diff --git a/t/t3000-ls-files-others.sh b/t/t3000-ls-files-others.sh index afd4756134..0aefadacb0 100755 --- a/t/t3000-ls-files-others.sh +++ b/t/t3000-ls-files-others.sh @@ -3,7 +3,7 @@ # Copyright (c) 2005 Junio C Hamano # -test_description='git ls-files test (--others should pick up symlinks). +test_description='basic tests for ls-files --others This test runs git ls-files --others with the following on the filesystem. diff --git a/t/t3005-ls-files-relative.sh b/t/t3005-ls-files-relative.sh index 209b4c7cd8..2ec69a8a26 100755 --- a/t/t3005-ls-files-relative.sh +++ b/t/t3005-ls-files-relative.sh @@ -7,10 +7,6 @@ This test runs git ls-files with various relative path arguments. . ./test-lib.sh -new_line=' -' -sq=\' - test_expect_success 'prepare' ' : >never-mind-me && git add never-mind-me && @@ -44,9 +40,9 @@ test_expect_success 'ls-files -c' ' cd top/sub && for f in ../y* do - echo "error: pathspec $sq$f$sq did not match any file(s) known to git" + echo "error: pathspec $SQ$f$SQ did not match any file(s) known to git" done >expect.err && - echo "Did you forget to ${sq}git add${sq}?" >>expect.err && + echo "Did you forget to ${SQ}git add${SQ}?" >>expect.err && ls ../x* >expect.out && test_must_fail git ls-files -c --error-unmatch ../[xy]* >actual.out 2>actual.err && test_cmp expect.out actual.out && @@ -59,9 +55,9 @@ test_expect_success 'ls-files -o' ' cd top/sub && for f in ../x* do - echo "error: pathspec $sq$f$sq did not match any file(s) known to git" + echo "error: pathspec $SQ$f$SQ did not match any file(s) known to git" done >expect.err && - echo "Did you forget to ${sq}git add${sq}?" >>expect.err && + echo "Did you forget to ${SQ}git add${SQ}?" >>expect.err && ls ../y* >expect.out && test_must_fail git ls-files -o --error-unmatch ../[xy]* >actual.out 2>actual.err && test_cmp expect.out actual.out && diff --git a/t/t3009-ls-files-others-nonsubmodule.sh b/t/t3009-ls-files-others-nonsubmodule.sh new file mode 100755 index 0000000000..963f3462b7 --- /dev/null +++ b/t/t3009-ls-files-others-nonsubmodule.sh @@ -0,0 +1,50 @@ +#!/bin/sh + +test_description='test git ls-files --others with non-submodule repositories + +This test runs git ls-files --others with the following working tree: + + nonrepo-no-files/ + plain directory with no files + nonrepo-untracked-file/ + plain directory with an untracked file + repo-no-commit-no-files/ + git repository without a commit or a file + repo-no-commit-untracked-file/ + git repository without a commit but with an untracked file + repo-with-commit-no-files/ + git repository with a commit and no untracked files + repo-with-commit-untracked-file/ + git repository with a commit and an untracked file +' + +. ./test-lib.sh + +test_expect_success 'setup: directories' ' + mkdir nonrepo-no-files/ && + mkdir nonrepo-untracked-file && + : >nonrepo-untracked-file/untracked && + git init repo-no-commit-no-files && + git init repo-no-commit-untracked-file && + : >repo-no-commit-untracked-file/untracked && + git init repo-with-commit-no-files && + git -C repo-with-commit-no-files commit --allow-empty -mmsg && + git init repo-with-commit-untracked-file && + test_commit -C repo-with-commit-untracked-file msg && + : >repo-with-commit-untracked-file/untracked +' + +test_expect_success 'ls-files --others handles untracked git repositories' ' + git ls-files -o >output && + cat >expect <<-EOF && + nonrepo-untracked-file/untracked + output + repo-no-commit-no-files/ + repo-no-commit-untracked-file/ + repo-with-commit-no-files/ + repo-with-commit-untracked-file/ + EOF + test_cmp expect output +' + +test_done diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 478b82cf9b..411a70b0ce 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -42,6 +42,10 @@ test_expect_success 'git branch a/b/c should create a branch' ' git branch a/b/c && test_path_is_file .git/refs/heads/a/b/c ' +test_expect_success 'git branch mb master... should create a branch' ' + git branch mb master... && test_path_is_file .git/refs/heads/mb +' + test_expect_success 'git branch HEAD should fail' ' test_must_fail git branch HEAD ' @@ -202,18 +206,22 @@ test_expect_success 'git branch -M baz bam should succeed when baz is checked ou git worktree add -f bazdir2 baz && git branch -M baz bam && test $(git -C bazdir rev-parse --abbrev-ref HEAD) = bam && - test $(git -C bazdir2 rev-parse --abbrev-ref HEAD) = bam + test $(git -C bazdir2 rev-parse --abbrev-ref HEAD) = bam && + rm -r bazdir bazdir2 && + git worktree prune ' test_expect_success 'git branch -M baz bam should succeed within a worktree in which baz is checked out' ' git checkout -b baz && - git worktree add -f bazdir3 baz && + git worktree add -f bazdir baz && ( - cd bazdir3 && + cd bazdir && git branch -M baz bam && test $(git rev-parse --abbrev-ref HEAD) = bam ) && - test $(git rev-parse --abbrev-ref HEAD) = bam + test $(git rev-parse --abbrev-ref HEAD) = bam && + rm -r bazdir && + git worktree prune ' test_expect_success 'git branch -M master should work when master is checked out' ' @@ -264,6 +272,30 @@ test_expect_success 'git branch --list -d t should fail' ' test_must_fail git rev-parse refs/heads/t ' +test_expect_success 'deleting checked-out branch from repo that is a submodule' ' + test_when_finished "rm -rf repo1 repo2" && + + git init repo1 && + git init repo1/sub && + test_commit -C repo1/sub x && + git -C repo1 submodule add ./sub && + git -C repo1 commit -m "adding sub" && + + git clone --recurse-submodules repo1 repo2 && + git -C repo2/sub checkout -b work && + test_must_fail git -C repo2/sub branch -D work +' + +test_expect_success 'bare main worktree has HEAD at branch deleted by secondary worktree' ' + test_when_finished "rm -rf nonbare base secondary" && + + git init nonbare && + test_commit -C nonbare x && + git clone --bare nonbare bare && + git -C bare worktree add --detach ../secondary master && + git -C secondary branch -D master +' + test_expect_success 'git branch --list -v with --abbrev' ' test_when_finished "git branch -D t" && git branch t && @@ -292,8 +324,8 @@ test_expect_success 'git branch --list -v with --abbrev' ' test_expect_success 'git branch --column' ' COLUMNS=81 git branch --column=column >actual && cat >expected <<\EOF && - a/b/c bam foo l * master n o/p r - abc bar j/k m/m master2 o/o q + a/b/c bam foo l * master mb o/o q + abc bar j/k m/m master2 n o/p r EOF test_cmp expected actual ' @@ -315,6 +347,7 @@ test_expect_success 'git branch --column with an extremely long branch name' ' m/m * master master2 + mb n o/o o/p @@ -332,8 +365,8 @@ test_expect_success 'git branch with column.*' ' git config --unset column.branch && git config --unset column.ui && cat >expected <<\EOF && - a/b/c bam foo l * master n o/p r - abc bar j/k m/m master2 o/o q + a/b/c bam foo l * master mb o/o q + abc bar j/k m/m master2 n o/p r EOF test_cmp expected actual ' @@ -357,6 +390,7 @@ test_expect_success 'git branch -v with column.ui ignored' ' m/m * master master2 + mb n o/o o/p @@ -774,7 +808,9 @@ test_expect_success 'test deleting branch without config' ' test_expect_success 'deleting currently checked out branch fails' ' git worktree add -b my7 my7 && test_must_fail git -C my7 branch -d my7 && - test_must_fail git branch -d my7 + test_must_fail git branch -d my7 && + rm -r my7 && + git worktree prune ' test_expect_success 'test --track without .fetch entries' ' diff --git a/t/t3201-branch-contains.sh b/t/t3201-branch-contains.sh index 0ea4fc4694..40251c9f8f 100755 --- a/t/t3201-branch-contains.sh +++ b/t/t3201-branch-contains.sh @@ -192,10 +192,10 @@ test_expect_success 'branch --merged with --verbose' ' EOF test_cmp expect actual && git branch --verbose --merged topic >actual && - cat >expect <<-\EOF && - master c77a0a9 second on master - * topic 2c939f4 [ahead 1] foo - zzz c77a0a9 second on master + cat >expect <<-EOF && + master $(git rev-parse --short master) second on master + * topic $(git rev-parse --short topic ) [ahead 1] foo + zzz $(git rev-parse --short zzz ) second on master EOF test_i18ncmp expect actual ' diff --git a/t/t3203-branch-output.sh b/t/t3203-branch-output.sh index ee6787614c..71818b90f0 100755 --- a/t/t3203-branch-output.sh +++ b/t/t3203-branch-output.sh @@ -100,6 +100,53 @@ test_expect_success 'git branch -v pattern does not show branch summaries' ' test_must_fail git branch -v branch* ' +test_expect_success 'git branch `--show-current` shows current branch' ' + cat >expect <<-\EOF && + branch-two + EOF + git checkout branch-two && + git branch --show-current >actual && + test_cmp expect actual +' + +test_expect_success 'git branch `--show-current` is silent when detached HEAD' ' + git checkout HEAD^0 && + git branch --show-current >actual && + test_must_be_empty actual +' + +test_expect_success 'git branch `--show-current` works properly when tag exists' ' + cat >expect <<-\EOF && + branch-and-tag-name + EOF + test_when_finished " + git checkout branch-one + git branch -D branch-and-tag-name + " && + git checkout -b branch-and-tag-name && + test_when_finished "git tag -d branch-and-tag-name" && + git tag branch-and-tag-name && + git branch --show-current >actual && + test_cmp expect actual +' + +test_expect_success 'git branch `--show-current` works properly with worktrees' ' + cat >expect <<-\EOF && + branch-one + branch-two + EOF + git checkout branch-one && + test_when_finished " + git worktree remove worktree_dir + " && + git worktree add worktree_dir branch-two && + { + git branch --show-current && + git -C worktree_dir branch --show-current + } >actual && + test_cmp expect actual +' + test_expect_success 'git branch shows detached HEAD properly' ' cat >expect <<EOF && * (HEAD detached at $(git rev-parse --short HEAD^0)) @@ -240,6 +287,24 @@ test_expect_success 'git branch --format option' ' test_i18ncmp expect actual ' +test_expect_success 'worktree colors correct' ' + cat >expect <<-EOF && + * <GREEN>(HEAD detached from fromtag)<RESET> + ambiguous<RESET> + branch-one<RESET> + + <CYAN>branch-two<RESET> + master<RESET> + ref-to-branch<RESET> -> branch-one + ref-to-remote<RESET> -> origin/branch-one + EOF + git worktree add worktree_dir branch-two && + git branch --color >actual.raw && + rm -r worktree_dir && + git worktree prune && + test_decode_color <actual.raw >actual && + test_i18ncmp expect actual +' + test_expect_success "set up color tests" ' echo "<RED>master<RESET>" >expect.color && echo "master" >expect.bare && @@ -264,4 +329,23 @@ test_expect_success '--color overrides auto-color' ' test_cmp expect.color actual ' +test_expect_success 'verbose output lists worktree path' ' + one=$(git rev-parse --short HEAD) && + two=$(git rev-parse --short master) && + cat >expect <<-EOF && + * (HEAD detached from fromtag) $one one + ambiguous $one one + branch-one $two two + + branch-two $one ($(pwd)/worktree_dir) one + master $two two + ref-to-branch $two two + ref-to-remote $two two + EOF + git worktree add worktree_dir branch-two && + git branch -vv >actual && + rm -r worktree_dir && + git worktree prune && + test_i18ncmp expect actual +' + test_done diff --git a/t/t3206-range-diff.sh b/t/t3206-range-diff.sh index 048feaf6dd..0120f769f1 100755 --- a/t/t3206-range-diff.sh +++ b/t/t3206-range-diff.sh @@ -8,17 +8,124 @@ test_description='range-diff tests' # harm than good. We need some real history. test_expect_success 'setup' ' - git fast-import < "$TEST_DIRECTORY"/t3206/history.export + git fast-import < "$TEST_DIRECTORY"/t3206/history.export && + test_oid_cache <<-EOF + # topic + t1 sha1:4de457d + t2 sha1:fccce22 + t3 sha1:147e64e + t4 sha1:a63e992 + t1 sha256:b89f8b9 + t2 sha256:5f12aad + t3 sha256:ea8b273 + t4 sha256:14b7336 + + # unmodified + u1 sha1:35b9b25 + u2 sha1:de345ab + u3 sha1:9af6654 + u4 sha1:2901f77 + u1 sha256:e3731be + u2 sha256:14fadf8 + u3 sha256:736c4bc + u4 sha256:673e77d + + # reordered + r1 sha1:aca177a + r2 sha1:14ad629 + r3 sha1:ee58208 + r4 sha1:307b27a + r1 sha256:f59d3aa + r2 sha256:fb261a8 + r3 sha256:cb2649b + r4 sha256:958577e + + # removed (deleted) + d1 sha1:7657159 + d2 sha1:43d84d3 + d3 sha1:a740396 + d1 sha256:e312513 + d2 sha256:eb19258 + d3 sha256:1ccb3c1 + + # added + a1 sha1:2716022 + a2 sha1:b62accd + a3 sha1:df46cfa + a4 sha1:3e64548 + a5 sha1:12b4063 + a1 sha256:d724f4d + a2 sha256:1de7762 + a3 sha256:e159431 + a4 sha256:b3e483c + a5 sha256:90866a7 + + # rebased + b1 sha1:cc9c443 + b2 sha1:c5d9641 + b3 sha1:28cc2b6 + b4 sha1:5628ab7 + b5 sha1:a31b12e + b1 sha256:a1a8717 + b2 sha256:20a5862 + b3 sha256:587172a + b4 sha256:2721c5d + b5 sha256:7b57864 + + # changed + c1 sha1:a4b3333 + c2 sha1:f51d370 + c3 sha1:0559556 + c4 sha1:d966c5c + c1 sha256:f8c2b9d + c2 sha256:3fb6318 + c3 sha256:168ab68 + c4 sha256:3526539 + + # changed-message + m1 sha1:f686024 + m2 sha1:4ab067d + m3 sha1:b9cb956 + m4 sha1:8add5f1 + m1 sha256:31e6281 + m2 sha256:a06bf1b + m3 sha256:82dc654 + m4 sha256:48470c5 + + # renamed + n1 sha1:f258d75 + n2 sha1:017b62d + n3 sha1:3ce7af6 + n4 sha1:1e6226b + n1 sha256:ad52114 + n2 sha256:3b54c8f + n3 sha256:3b0a644 + n4 sha256:e461653 + + # added and removed + s1 sha1:096b1ba + s2 sha1:d92e698 + s3 sha1:9a1db4d + s4 sha1:fea3b5c + s1 sha256:a7f9134 + s2 sha256:b4c2580 + s3 sha256:1d62aa2 + s4 sha256:48160e8 + + # Empty delimiter (included so lines match neatly) + __ sha1:------- + __ sha256:------- + EOF ' test_expect_success 'simple A..B A..C (unmodified)' ' git range-diff --no-color master..topic master..unmodified \ >actual && cat >expected <<-EOF && - 1: 4de457d = 1: 35b9b25 s/5/A/ - 2: fccce22 = 2: de345ab s/4/A/ - 3: 147e64e = 3: 9af6654 s/11/B/ - 4: a63e992 = 4: 2901f77 s/12/B/ + 1: $(test_oid t1) = 1: $(test_oid u1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid u2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid u3) s/11/B/ + 4: $(test_oid t4) = 4: $(test_oid u4) s/12/B/ EOF test_cmp expected actual ' @@ -38,10 +145,10 @@ test_expect_success 'simple A B C (unmodified)' ' test_expect_success 'trivial reordering' ' git range-diff --no-color master topic reordered >actual && cat >expected <<-EOF && - 1: 4de457d = 1: aca177a s/5/A/ - 3: 147e64e = 2: 14ad629 s/11/B/ - 4: a63e992 = 3: ee58208 s/12/B/ - 2: fccce22 = 4: 307b27a s/4/A/ + 1: $(test_oid t1) = 1: $(test_oid r1) s/5/A/ + 3: $(test_oid t3) = 2: $(test_oid r2) s/11/B/ + 4: $(test_oid t4) = 3: $(test_oid r3) s/12/B/ + 2: $(test_oid t2) = 4: $(test_oid r4) s/4/A/ EOF test_cmp expected actual ' @@ -49,10 +156,10 @@ test_expect_success 'trivial reordering' ' test_expect_success 'removed a commit' ' git range-diff --no-color master topic removed >actual && cat >expected <<-EOF && - 1: 4de457d = 1: 7657159 s/5/A/ - 2: fccce22 < -: ------- s/4/A/ - 3: 147e64e = 2: 43d84d3 s/11/B/ - 4: a63e992 = 3: a740396 s/12/B/ + 1: $(test_oid t1) = 1: $(test_oid d1) s/5/A/ + 2: $(test_oid t2) < -: $(test_oid __) s/4/A/ + 3: $(test_oid t3) = 2: $(test_oid d2) s/11/B/ + 4: $(test_oid t4) = 3: $(test_oid d3) s/12/B/ EOF test_cmp expected actual ' @@ -60,11 +167,11 @@ test_expect_success 'removed a commit' ' test_expect_success 'added a commit' ' git range-diff --no-color master topic added >actual && cat >expected <<-EOF && - 1: 4de457d = 1: 2716022 s/5/A/ - 2: fccce22 = 2: b62accd s/4/A/ - -: ------- > 3: df46cfa s/6/A/ - 3: 147e64e = 4: 3e64548 s/11/B/ - 4: a63e992 = 5: 12b4063 s/12/B/ + 1: $(test_oid t1) = 1: $(test_oid a1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid a2) s/4/A/ + -: $(test_oid __) > 3: $(test_oid a3) s/6/A/ + 3: $(test_oid t3) = 4: $(test_oid a4) s/11/B/ + 4: $(test_oid t4) = 5: $(test_oid a5) s/12/B/ EOF test_cmp expected actual ' @@ -72,10 +179,10 @@ test_expect_success 'added a commit' ' test_expect_success 'new base, A B C' ' git range-diff --no-color master topic rebased >actual && cat >expected <<-EOF && - 1: 4de457d = 1: cc9c443 s/5/A/ - 2: fccce22 = 2: c5d9641 s/4/A/ - 3: 147e64e = 3: 28cc2b6 s/11/B/ - 4: a63e992 = 4: 5628ab7 s/12/B/ + 1: $(test_oid t1) = 1: $(test_oid b1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid b2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid b3) s/11/B/ + 4: $(test_oid t4) = 4: $(test_oid b4) s/12/B/ EOF test_cmp expected actual ' @@ -84,11 +191,11 @@ test_expect_success 'new base, B...C' ' # this syntax includes the commits from master! git range-diff --no-color topic...rebased >actual && cat >expected <<-EOF && - -: ------- > 1: a31b12e unrelated - 1: 4de457d = 2: cc9c443 s/5/A/ - 2: fccce22 = 3: c5d9641 s/4/A/ - 3: 147e64e = 4: 28cc2b6 s/11/B/ - 4: a63e992 = 5: 5628ab7 s/12/B/ + -: $(test_oid __) > 1: $(test_oid b5) unrelated + 1: $(test_oid t1) = 2: $(test_oid b1) s/5/A/ + 2: $(test_oid t2) = 3: $(test_oid b2) s/4/A/ + 3: $(test_oid t3) = 4: $(test_oid b3) s/11/B/ + 4: $(test_oid t4) = 5: $(test_oid b4) s/12/B/ EOF test_cmp expected actual ' @@ -96,10 +203,10 @@ test_expect_success 'new base, B...C' ' test_expect_success 'changed commit' ' git range-diff --no-color topic...changed >actual && cat >expected <<-EOF && - 1: 4de457d = 1: a4b3333 s/5/A/ - 2: fccce22 = 2: f51d370 s/4/A/ - 3: 147e64e ! 3: 0559556 s/11/B/ - @@ -10,7 +10,7 @@ + 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ + 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ + @@ file: A 9 10 -11 @@ -108,9 +215,9 @@ test_expect_success 'changed commit' ' 12 13 14 - 4: a63e992 ! 4: d966c5c s/12/B/ - @@ -8,7 +8,7 @@ - @@ + 4: $(test_oid t4) ! 4: $(test_oid c4) s/12/B/ + @@ file + @@ file: A 9 10 - B @@ -125,10 +232,10 @@ test_expect_success 'changed commit' ' test_expect_success 'changed commit with --no-patch diff option' ' git range-diff --no-color --no-patch topic...changed >actual && cat >expected <<-EOF && - 1: 4de457d = 1: a4b3333 s/5/A/ - 2: fccce22 = 2: f51d370 s/4/A/ - 3: 147e64e ! 3: 0559556 s/11/B/ - 4: a63e992 ! 4: d966c5c s/12/B/ + 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ + 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ + 4: $(test_oid t4) ! 4: $(test_oid c4) s/12/B/ EOF test_cmp expected actual ' @@ -136,16 +243,16 @@ test_expect_success 'changed commit with --no-patch diff option' ' test_expect_success 'changed commit with --stat diff option' ' git range-diff --no-color --stat topic...changed >actual && cat >expected <<-EOF && - 1: 4de457d = 1: a4b3333 s/5/A/ + 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) - 2: fccce22 = 2: f51d370 s/4/A/ + 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) - 3: 147e64e ! 3: 0559556 s/11/B/ + 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) - 4: a63e992 ! 4: d966c5c s/12/B/ + 4: $(test_oid t4) ! 4: $(test_oid c4) s/12/B/ a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) EOF @@ -155,10 +262,10 @@ test_expect_success 'changed commit with --stat diff option' ' test_expect_success 'changed commit with sm config' ' git range-diff --no-color --submodule=log topic...changed >actual && cat >expected <<-EOF && - 1: 4de457d = 1: a4b3333 s/5/A/ - 2: fccce22 = 2: f51d370 s/4/A/ - 3: 147e64e ! 3: 0559556 s/11/B/ - @@ -10,7 +10,7 @@ + 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ + 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ + @@ file: A 9 10 -11 @@ -167,9 +274,9 @@ test_expect_success 'changed commit with sm config' ' 12 13 14 - 4: a63e992 ! 4: d966c5c s/12/B/ - @@ -8,7 +8,7 @@ - @@ + 4: $(test_oid t4) ! 4: $(test_oid c4) s/12/B/ + @@ file + @@ file: A 9 10 - B @@ -181,6 +288,92 @@ test_expect_success 'changed commit with sm config' ' test_cmp expected actual ' +test_expect_success 'renamed file' ' + git range-diff --no-color --submodule=log topic...renamed-file >actual && + sed s/Z/\ /g >expected <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid n1) s/5/A/ + 2: $(test_oid t2) ! 2: $(test_oid n2) s/4/A/ + @@ Metadata + ZAuthor: Thomas Rast <trast@inf.ethz.ch> + Z + Z ## Commit message ## + - s/4/A/ + + s/4/A/ + rename file + Z + - ## file ## + + ## file => renamed-file ## + Z@@ + Z 1 + Z 2 + 3: $(test_oid t3) ! 3: $(test_oid n3) s/11/B/ + @@ Metadata + Z ## Commit message ## + Z s/11/B/ + Z + - ## file ## + -@@ file: A + + ## renamed-file ## + +@@ renamed-file: A + Z 8 + Z 9 + Z 10 + 4: $(test_oid t4) ! 4: $(test_oid n4) s/12/B/ + @@ Metadata + Z ## Commit message ## + Z s/12/B/ + Z + - ## file ## + -@@ file: A + + ## renamed-file ## + +@@ renamed-file: A + Z 9 + Z 10 + Z B + EOF + test_cmp expected actual +' + +test_expect_success 'file added and later removed' ' + git range-diff --no-color --submodule=log topic...added-removed >actual && + sed s/Z/\ /g >expected <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid s1) s/5/A/ + 2: $(test_oid t2) ! 2: $(test_oid s2) s/4/A/ + @@ Metadata + ZAuthor: Thomas Rast <trast@inf.ethz.ch> + Z + Z ## Commit message ## + - s/4/A/ + + s/4/A/ + new-file + Z + Z ## file ## + Z@@ + @@ file + Z A + Z 6 + Z 7 + + + + ## new-file (new) ## + 3: $(test_oid t3) ! 3: $(test_oid s3) s/11/B/ + @@ Metadata + ZAuthor: Thomas Rast <trast@inf.ethz.ch> + Z + Z ## Commit message ## + - s/11/B/ + + s/11/B/ + remove file + Z + Z ## file ## + Z@@ file: A + @@ file: A + Z 12 + Z 13 + Z 14 + + + + ## new-file (deleted) ## + 4: $(test_oid t4) = 4: $(test_oid s4) s/12/B/ + EOF + test_cmp expected actual +' + test_expect_success 'no commits on one side' ' git commit --amend -m "new message" && git range-diff master HEAD@{1} HEAD @@ -189,38 +382,38 @@ test_expect_success 'no commits on one side' ' test_expect_success 'changed message' ' git range-diff --no-color topic...changed-message >actual && sed s/Z/\ /g >expected <<-EOF && - 1: 4de457d = 1: f686024 s/5/A/ - 2: fccce22 ! 2: 4ab067d s/4/A/ - @@ -2,6 +2,8 @@ - Z + 1: $(test_oid t1) = 1: $(test_oid m1) s/5/A/ + 2: $(test_oid t2) ! 2: $(test_oid m2) s/4/A/ + @@ Metadata + Z ## Commit message ## Z s/4/A/ Z + Also a silly comment here! + - Z diff --git a/file b/file - Z --- a/file - Z +++ b/file - 3: 147e64e = 3: b9cb956 s/11/B/ - 4: a63e992 = 4: 8add5f1 s/12/B/ + Z ## file ## + Z@@ + Z 1 + 3: $(test_oid t3) = 3: $(test_oid m3) s/11/B/ + 4: $(test_oid t4) = 4: $(test_oid m4) s/12/B/ EOF test_cmp expected actual ' test_expect_success 'dual-coloring' ' - sed -e "s|^:||" >expect <<-\EOF && - :<YELLOW>1: a4b3333 = 1: f686024 s/5/A/<RESET> - :<RED>2: f51d370 <RESET><YELLOW>!<RESET><GREEN> 2: 4ab067d<RESET><YELLOW> s/4/A/<RESET> - : <REVERSE><CYAN>@@ -2,6 +2,8 @@<RESET> - : <RESET> + sed -e "s|^:||" >expect <<-EOF && + :<YELLOW>1: $(test_oid c1) = 1: $(test_oid m1) s/5/A/<RESET> + :<RED>2: $(test_oid c2) <RESET><YELLOW>!<RESET><GREEN> 2: $(test_oid m2)<RESET><YELLOW> s/4/A/<RESET> + : <REVERSE><CYAN>@@<RESET> <RESET>Metadata<RESET> + : ## Commit message ##<RESET> : s/4/A/<RESET> : <RESET> : <REVERSE><GREEN>+<RESET><BOLD> Also a silly comment here!<RESET> : <REVERSE><GREEN>+<RESET> - : diff --git a/file b/file<RESET> - : --- a/file<RESET> - : +++ b/file<RESET> - :<RED>3: 0559556 <RESET><YELLOW>!<RESET><GREEN> 3: b9cb956<RESET><YELLOW> s/11/B/<RESET> - : <REVERSE><CYAN>@@ -10,7 +10,7 @@<RESET> + : ## file ##<RESET> + : <CYAN> @@<RESET> + : 1<RESET> + :<RED>3: $(test_oid c3) <RESET><YELLOW>!<RESET><GREEN> 3: $(test_oid m3)<RESET><YELLOW> s/11/B/<RESET> + : <REVERSE><CYAN>@@<RESET> <RESET>file: A<RESET> : 9<RESET> : 10<RESET> : <RED> -11<RESET> @@ -229,9 +422,9 @@ test_expect_success 'dual-coloring' ' : 12<RESET> : 13<RESET> : 14<RESET> - :<RED>4: d966c5c <RESET><YELLOW>!<RESET><GREEN> 4: 8add5f1<RESET><YELLOW> s/12/B/<RESET> - : <REVERSE><CYAN>@@ -8,7 +8,7 @@<RESET> - : <CYAN> @@<RESET> + :<RED>4: $(test_oid c4) <RESET><YELLOW>!<RESET><GREEN> 4: $(test_oid m4)<RESET><YELLOW> s/12/B/<RESET> + : <REVERSE><CYAN>@@<RESET> <RESET>file<RESET> + : <CYAN> @@ file: A<RESET> : 9<RESET> : 10<RESET> : <REVERSE><RED>-<RESET><FAINT> BB<RESET> diff --git a/t/t3206/history.export b/t/t3206/history.export index b8ffff0940..7bb3814962 100644 --- a/t/t3206/history.export +++ b/t/t3206/history.export @@ -22,8 +22,8 @@ data 51 19 20 -reset refs/heads/removed -commit refs/heads/removed +reset refs/heads/renamed-file +commit refs/heads/renamed-file mark :2 author Thomas Rast <trast@inf.ethz.ch> 1374424921 +0200 committer Thomas Rast <trast@inf.ethz.ch> 1374484724 +0200 @@ -599,6 +599,82 @@ s/12/B/ from :46 M 100644 :28 file -reset refs/heads/removed -from :47 +commit refs/heads/added-removed +mark :48 +author Thomas Rast <trast@inf.ethz.ch> 1374485014 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574151 +0100 +data 7 +s/5/A/ +from :2 +M 100644 :3 file + +blob +mark :49 +data 0 + +commit refs/heads/added-removed +mark :50 +author Thomas Rast <trast@inf.ethz.ch> 1374485024 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574177 +0100 +data 18 +s/4/A/ + new-file +from :48 +M 100644 :5 file +M 100644 :49 new-file + +commit refs/heads/added-removed +mark :51 +author Thomas Rast <trast@inf.ethz.ch> 1374485036 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574177 +0100 +data 22 +s/11/B/ + remove file +from :50 +M 100644 :7 file +D new-file + +commit refs/heads/added-removed +mark :52 +author Thomas Rast <trast@inf.ethz.ch> 1374485044 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574177 +0100 +data 8 +s/12/B/ +from :51 +M 100644 :9 file + +commit refs/heads/renamed-file +mark :53 +author Thomas Rast <trast@inf.ethz.ch> 1374485014 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574309 +0100 +data 7 +s/5/A/ +from :2 +M 100644 :3 file + +commit refs/heads/renamed-file +mark :54 +author Thomas Rast <trast@inf.ethz.ch> 1374485024 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574312 +0100 +data 21 +s/4/A/ + rename file +from :53 +D file +M 100644 :5 renamed-file + +commit refs/heads/renamed-file +mark :55 +author Thomas Rast <trast@inf.ethz.ch> 1374485036 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574319 +0100 +data 8 +s/11/B/ +from :54 +M 100644 :7 renamed-file + +commit refs/heads/renamed-file +mark :56 +author Thomas Rast <trast@inf.ethz.ch> 1374485044 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574319 +0100 +data 8 +s/12/B/ +from :55 +M 100644 :9 renamed-file diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh index 84bbf88cf9..d3fa298c6a 100755 --- a/t/t3301-notes.sh +++ b/t/t3301-notes.sh @@ -66,8 +66,9 @@ test_expect_success 'show notes entry with %N' ' ' test_expect_success 'create reflog entry' ' + ref=$(git rev-parse --short refs/notes/commits) && cat <<-EOF >expect && - a1d8fa6 refs/notes/commits@{0}: notes: Notes added by '\''git notes add'\'' + $ref refs/notes/commits@{0}: notes: Notes added by '\''git notes add'\'' EOF git reflog show refs/notes/commits >actual && test_cmp expect actual @@ -134,8 +135,9 @@ test_expect_success 'can overwrite existing note with "git notes add -f"' ' ' test_expect_success 'show notes' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 7a4ca6ee52a974a66cbaa78e33214535dff1d691 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:14:13 2005 -0700 @@ -152,8 +154,9 @@ test_expect_success 'show notes' ' test_expect_success 'show multi-line notes' ' test_commit 3rd && MSG="b3${LF}c3c3c3c3${LF}d3d3d3" git notes add && + commit=$(git rev-parse HEAD) && cat >expect-multiline <<-EOF && - commit d07d62e5208f22eb5695e7eb47667dc8b9860290 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:15:13 2005 -0700 @@ -174,8 +177,9 @@ test_expect_success 'show -F notes' ' test_commit 4th && echo "xyzzy" >note5 && git notes add -F note5 && + commit=$(git rev-parse HEAD) && cat >expect-F <<-EOF && - commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:16:13 2005 -0700 @@ -198,10 +202,13 @@ test_expect_success 'Re-adding -F notes without -f fails' ' ' test_expect_success 'git log --pretty=raw does not show notes' ' + commit=$(git rev-parse HEAD) && + tree=$(git rev-parse HEAD^{tree}) && + parent=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 - tree 05ac65288c4c4b3b709a020ae94b2ece2f2201ae - parent d07d62e5208f22eb5695e7eb47667dc8b9860290 + commit $commit + tree $tree + parent $parent author A U Thor <author@example.com> 1112912173 -0700 committer C O Mitter <committer@example.com> 1112912173 -0700 @@ -291,8 +298,9 @@ test_expect_success 'git log --no-notes resets ref list' ' test_expect_success 'show -m notes' ' test_commit 5th && git notes add -m spam -m "foo${LF}bar${LF}baz" && + commit=$(git rev-parse HEAD) && cat >expect-m <<-EOF && - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 @@ -313,8 +321,9 @@ test_expect_success 'show -m notes' ' test_expect_success 'remove note with add -f -F /dev/null' ' git notes add -f -F /dev/null && + commit=$(git rev-parse HEAD) && cat >expect-rm-F <<-EOF && - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 @@ -356,14 +365,16 @@ test_expect_success 'create note with combination of -m and -F' ' test_expect_success 'remove note with "git notes remove"' ' git notes remove HEAD^ && git notes remove && + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect-rm-remove <<-EOF && - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 ${indent}5th - commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:16:13 2005 -0700 @@ -459,9 +470,11 @@ test_expect_success 'removing with --stdin --ignore-missing' ' ' test_expect_success 'list notes with "git notes list"' ' - cat >expect <<-EOF && - c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 7a4ca6ee52a974a66cbaa78e33214535dff1d691 - c18dc024e14f08d18d14eea0d747ff692d66d6a3 d07d62e5208f22eb5695e7eb47667dc8b9860290 + commit_2=$(git rev-parse 2nd) && + commit_3=$(git rev-parse 3rd) && + sort -t" " -k2 >expect <<-EOF && + $(git rev-parse refs/notes/commits:$commit_2) $commit_2 + $(git rev-parse refs/notes/commits:$commit_3) $commit_3 EOF git notes list >actual && test_cmp expect actual @@ -474,7 +487,7 @@ test_expect_success 'list notes with "git notes"' ' test_expect_success 'list specific note with "git notes list <object>"' ' cat >expect <<-EOF && - c18dc024e14f08d18d14eea0d747ff692d66d6a3 + $(git rev-parse refs/notes/commits:$commit_3) EOF git notes list HEAD^^ >actual && test_cmp expect actual @@ -498,10 +511,11 @@ test_expect_success 'append to existing note with "git notes append"' ' ' test_expect_success '"git notes list" does not expand to "git notes list HEAD"' ' - cat >expect_list <<-EOF && - c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 7a4ca6ee52a974a66cbaa78e33214535dff1d691 - 4b6ad22357cc8a1296720574b8d2fbc22fab0671 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 - c18dc024e14f08d18d14eea0d747ff692d66d6a3 d07d62e5208f22eb5695e7eb47667dc8b9860290 + commit_5=$(git rev-parse 5th) && + sort -t" " -k2 >expect_list <<-EOF && + $(git rev-parse refs/notes/commits:$commit_2) $commit_2 + $(git rev-parse refs/notes/commits:$commit_3) $commit_3 + $(git rev-parse refs/notes/commits:$commit_5) $commit_5 EOF git notes list >actual && test_cmp expect_list actual @@ -531,8 +545,9 @@ test_expect_success 'appending empty string to non-existing note does not create test_expect_success 'create other note on a different notes ref (setup)' ' test_commit 6th && GIT_NOTES_REF="refs/notes/other" git notes add -m "other note" && + commit=$(git rev-parse HEAD) && cat >expect-not-other <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 @@ -569,8 +584,10 @@ test_expect_success 'Do not show note when core.notesRef is overridden' ' ' test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' ' + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect-both <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 @@ -582,7 +599,7 @@ test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' ' Notes (other): ${indent}other note - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 @@ -616,8 +633,9 @@ test_expect_success 'notes.displayRef can be given more than once' ' ' test_expect_success 'notes.displayRef respects order' ' + commit=$(git rev-parse HEAD) && cat >expect-both-reversed <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 @@ -642,14 +660,16 @@ test_expect_success 'GIT_NOTES_DISPLAY_REF works' ' ' test_expect_success 'GIT_NOTES_DISPLAY_REF overrides config' ' + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect-none <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 ${indent}6th - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 @@ -666,8 +686,9 @@ test_expect_success '--show-notes=* adds to GIT_NOTES_DISPLAY_REF' ' ' test_expect_success '--no-standard-notes' ' + commit=$(git rev-parse HEAD) && cat >expect-commits <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 @@ -712,8 +733,10 @@ test_expect_success 'Allow notes on non-commits (trees, blobs, tags)' ' ' test_expect_success 'create note from other note with "git notes add -C"' ' + test_commit 7th && + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit fb01e0ca8c33b6cc0c6451dde747f97df567cb5c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:19:13 2005 -0700 @@ -722,7 +745,6 @@ test_expect_success 'create note from other note with "git notes add -C"' ' Notes: ${indent}order test EOF - test_commit 7th && git notes add -C $(git notes list HEAD^) && git log -1 >actual && test_cmp expect actual && @@ -744,8 +766,9 @@ test_expect_success 'create note from non-blob with "git notes add -C" fails' ' ' test_expect_success 'create note from blob with "git notes add -C" reuses blob id' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 9a4c31c7f722b5d517e92c64e932dd751e1413bf + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:20:13 2005 -0700 @@ -762,8 +785,10 @@ test_expect_success 'create note from blob with "git notes add -C" reuses blob i ' test_expect_success 'create note from other note with "git notes add -c"' ' + test_commit 9th && + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 2e0db4bc649e174d667a1cde19e725cf897a5bd2 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:21:13 2005 -0700 @@ -772,7 +797,6 @@ test_expect_success 'create note from other note with "git notes add -c"' ' Notes: ${indent}yet another note EOF - test_commit 9th && MSG="yet another note" git notes add -c $(git notes list HEAD^^) && git log -1 >actual && test_cmp expect actual @@ -785,8 +809,9 @@ test_expect_success 'create note from non-existing note with "git notes add -c" ' test_expect_success 'append to note from other note with "git notes append -C"' ' + commit=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit 2e0db4bc649e174d667a1cde19e725cf897a5bd2 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:21:13 2005 -0700 @@ -803,8 +828,9 @@ test_expect_success 'append to note from other note with "git notes append -C"' ' test_expect_success 'create note from other note with "git notes append -c"' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 7c3b87ab368f81e11b1ea87b2ab99a71ccd25406 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:22:13 2005 -0700 @@ -819,8 +845,9 @@ test_expect_success 'create note from other note with "git notes append -c"' ' ' test_expect_success 'append to note from other note with "git notes append -c"' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 7c3b87ab368f81e11b1ea87b2ab99a71ccd25406 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:22:13 2005 -0700 @@ -837,8 +864,10 @@ test_expect_success 'append to note from other note with "git notes append -c"' ' test_expect_success 'copy note with "git notes copy"' ' + test_commit 11th && + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit a446fff8777efdc6eb8f4b7c8a5ff699484df0d5 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:23:13 2005 -0700 @@ -849,7 +878,6 @@ test_expect_success 'copy note with "git notes copy"' ' ${indent} ${indent}yet another note EOF - test_commit 11th && git notes copy HEAD^ HEAD && git log -1 >actual && test_cmp expect actual && @@ -864,8 +892,9 @@ test_expect_success 'prevent overwrite with "git notes copy"' ' ' test_expect_success 'allow overwrite with "git notes copy -f"' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit a446fff8777efdc6eb8f4b7c8a5ff699484df0d5 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:23:13 2005 -0700 @@ -889,8 +918,10 @@ test_expect_success 'cannot copy note from object without notes' ' ' test_expect_success 'git notes copy --stdin' ' + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit e871aa61182b1d95d0a6fb75445d891722863b6b + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:25:13 2005 -0700 @@ -901,7 +932,7 @@ test_expect_success 'git notes copy --stdin' ' ${indent} ${indent}yet another note - commit 65e263ded02ae4e8839bc151095113737579dc12 + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:24:13 2005 -0700 @@ -922,21 +953,23 @@ test_expect_success 'git notes copy --stdin' ' ' test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' + test_commit 14th && + test_commit 15th && + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 ${indent}15th - commit 07c85d77059393ed0154b8c96906547a59dfcddd + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:26:13 2005 -0700 ${indent}14th EOF - test_commit 14th && - test_commit 15th && (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^) && echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | git notes copy --for-rewrite=foo && @@ -945,8 +978,10 @@ test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' ' test_expect_success 'git notes copy --for-rewrite (enabled)' ' + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -957,7 +992,7 @@ test_expect_success 'git notes copy --for-rewrite (enabled)' ' ${indent} ${indent}yet another note - commit 07c85d77059393ed0154b8c96906547a59dfcddd + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:26:13 2005 -0700 @@ -986,8 +1021,9 @@ test_expect_success 'git notes copy --for-rewrite (disabled)' ' ' test_expect_success 'git notes copy --for-rewrite (overwrite)' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -1015,8 +1051,9 @@ test_expect_success 'git notes copy --for-rewrite (ignore)' ' ' test_expect_success 'git notes copy --for-rewrite (append)' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -1037,8 +1074,9 @@ test_expect_success 'git notes copy --for-rewrite (append)' ' ' test_expect_success 'git notes copy --for-rewrite (append two to one)' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -1075,8 +1113,9 @@ test_expect_success 'git notes copy --for-rewrite (append empty)' ' ' test_expect_success 'GIT_NOTES_REWRITE_MODE works' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -1095,8 +1134,9 @@ test_expect_success 'GIT_NOTES_REWRITE_MODE works' ' ' test_expect_success 'GIT_NOTES_REWRITE_REF works' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -1120,9 +1160,10 @@ test_expect_success 'GIT_NOTES_REWRITE_REF overrides config' ' test_config notes.rewriteMode overwrite && test_config notes.rewriteRef refs/notes/other && echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - GIT_NOTES_REWRITE_REF= git notes copy --for-rewrite=foo && + GIT_NOTES_REWRITE_REF=refs/notes/commits \ + git notes copy --for-rewrite=foo && git log -1 >actual && - test_cmp expect actual + grep "replacement note 3" actual ' test_expect_success 'git notes copy diagnoses too many or too few parameters' ' diff --git a/t/t3305-notes-fanout.sh b/t/t3305-notes-fanout.sh index 54460beec4..831f83d211 100755 --- a/t/t3305-notes-fanout.sh +++ b/t/t3305-notes-fanout.sh @@ -35,15 +35,10 @@ test_expect_success 'many notes created with git-notes triggers fanout' ' git ls-tree -r --name-only refs/notes/commits | while read path do - case "$path" in - ??/??????????????????????????????????????) - : true - ;; - *) + echo $path | grep "^../[0-9a-f]*$" || { echo "Invalid path \"$path\"" && - return 1 - ;; - esac + return 1; + } done ' @@ -77,15 +72,10 @@ test_expect_success 'deleting most notes triggers fanout consolidation' ' git ls-tree -r --name-only refs/notes/commits | while read path do - case "$path" in - ????????????????????????????????????????) - : true - ;; - *) + echo $path | grep -v "^../.*" || { echo "Invalid path \"$path\"" && - return 1 - ;; - esac + return 1; + } done ' diff --git a/t/t3306-notes-prune.sh b/t/t3306-notes-prune.sh index 61748088eb..8f4102ff9e 100755 --- a/t/t3306-notes-prune.sh +++ b/t/t3306-notes-prune.sh @@ -11,23 +11,26 @@ test_expect_success 'setup: create a few commits with notes' ' test_tick && git commit -m 1st && git notes add -m "Note #1" && + first=$(git rev-parse HEAD) && : > file2 && git add file2 && test_tick && git commit -m 2nd && git notes add -m "Note #2" && + second=$(git rev-parse HEAD) && : > file3 && git add file3 && test_tick && git commit -m 3rd && - COMMIT_FILE=.git/objects/5e/e1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && + third=$(git rev-parse HEAD) && + COMMIT_FILE=$(echo $third | sed "s!^..!.git/objects/&/!") && test -f $COMMIT_FILE && test-tool chmtime =+0 $COMMIT_FILE && git notes add -m "Note #3" ' cat > expect <<END_OF_LOG -commit 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 +commit $third Author: A U Thor <author@example.com> Date: Thu Apr 7 15:15:13 2005 -0700 @@ -36,7 +39,7 @@ Date: Thu Apr 7 15:15:13 2005 -0700 Notes: Note #3 -commit 08341ad9e94faa089d60fd3f523affb25c6da189 +commit $second Author: A U Thor <author@example.com> Date: Thu Apr 7 15:14:13 2005 -0700 @@ -45,7 +48,7 @@ Date: Thu Apr 7 15:14:13 2005 -0700 Notes: Note #2 -commit ab5f302035f2e7aaf04265f08b42034c23256e1f +commit $first Author: A U Thor <author@example.com> Date: Thu Apr 7 15:13:13 2005 -0700 @@ -70,16 +73,16 @@ test_expect_success 'remove some commits' ' test_expect_success 'verify that commits are gone' ' - test_must_fail git cat-file -p 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - git cat-file -p 08341ad9e94faa089d60fd3f523affb25c6da189 && - git cat-file -p ab5f302035f2e7aaf04265f08b42034c23256e1f + test_must_fail git cat-file -p $third && + git cat-file -p $second && + git cat-file -p $first ' test_expect_success 'verify that notes are still present' ' - git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && - git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f + git notes show $third && + git notes show $second && + git notes show $first ' test_expect_success 'prune -n does not remove notes' ' @@ -90,13 +93,10 @@ test_expect_success 'prune -n does not remove notes' ' test_cmp expect actual ' -cat > expect <<EOF -5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 -EOF test_expect_success 'prune -n lists prunable notes' ' - + echo $third >expect && git notes prune -n > actual && test_cmp expect actual ' @@ -109,9 +109,9 @@ test_expect_success 'prune notes' ' test_expect_success 'verify that notes are gone' ' - test_must_fail git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && - git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f + test_must_fail git notes show $third && + git notes show $second && + git notes show $first ' test_expect_success 'remove some commits' ' @@ -121,21 +121,18 @@ test_expect_success 'remove some commits' ' git gc --prune=now ' -cat > expect <<EOF -08341ad9e94faa089d60fd3f523affb25c6da189 -EOF - test_expect_success 'prune -v notes' ' + echo $second >expect && git notes prune -v > actual && test_cmp expect actual ' test_expect_success 'verify that notes are gone' ' - test_must_fail git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - test_must_fail git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && - git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f + test_must_fail git notes show $third && + test_must_fail git notes show $second && + git notes show $first ' test_done diff --git a/t/t3311-notes-merge-fanout.sh b/t/t3311-notes-merge-fanout.sh index 93516ef67c..37151a3adc 100755 --- a/t/t3311-notes-merge-fanout.sh +++ b/t/t3311-notes-merge-fanout.sh @@ -114,12 +114,12 @@ cp expect_log_x expect_log_y test_expect_success 'Add a few hundred commits w/notes to trigger fanout (x -> y)' ' git update-ref refs/notes/y refs/notes/x && git config core.notesRef refs/notes/y && - i=5 && - while test $i -lt $num + test_commit_bulk --start=6 --id=commit $((num - 5)) && + i=0 && + while test $i -lt $((num - 5)) do - i=$(($i + 1)) && - test_commit "commit$i" >/dev/null && - git notes add -m "notes for commit$i" || return 1 + git notes add -m "notes for commit$i" HEAD~$i || return 1 + i=$((i + 1)) done && test "$(git rev-parse refs/notes/y)" != "$(git rev-parse refs/notes/x)" && # Expected number of commits and notes diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 3e73f7584c..ab18ac5f28 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -59,6 +59,14 @@ test_expect_success 'rebase against master' ' git rebase master ' +test_expect_success 'rebase sets ORIG_HEAD to pre-rebase state' ' + git checkout -b orig-head topic && + pre="$(git rev-parse --verify HEAD)" && + git rebase master && + test_cmp_rev "$pre" ORIG_HEAD && + ! test_cmp_rev "$pre" HEAD +' + test_expect_success 'rebase, with <onto> and <upstream> specified as :/quuxery' ' test_when_finished "git branch -D torebase" && git checkout -b torebase my-topic-branch^ && @@ -277,7 +285,7 @@ EOF test_cmp From_.msg out ' -test_expect_success 'rebase--am.sh and --show-current-patch' ' +test_expect_success 'rebase --am and --show-current-patch' ' test_create_repo conflict-apply && ( cd conflict-apply && @@ -287,12 +295,48 @@ test_expect_success 'rebase--am.sh and --show-current-patch' ' echo two >>init.t && git commit -a -m two && git tag two && - test_must_fail git rebase --onto init HEAD^ && + test_must_fail git rebase -f --onto init HEAD^ && GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && grep "show.*$(git rev-parse two)" stderr ) ' +test_expect_success 'rebase --am and .gitattributes' ' + test_create_repo attributes && + ( + cd attributes && + test_commit init && + git config filter.test.clean "sed -e '\''s/smudged/clean/g'\''" && + git config filter.test.smudge "sed -e '\''s/clean/smudged/g'\''" && + + test_commit second && + git checkout -b test HEAD^ && + + echo "*.txt filter=test" >.gitattributes && + git add .gitattributes && + test_commit third && + + echo "This text is smudged." >a.txt && + git add a.txt && + test_commit fourth && + + git checkout -b removal HEAD^ && + git rm .gitattributes && + git add -u && + test_commit fifth && + git cherry-pick test && + + git checkout test && + git rebase master && + grep "smudged" a.txt && + + git checkout removal && + git reset --hard && + git rebase master && + grep "clean" a.txt + ) +' + test_expect_success 'rebase--merge.sh and --show-current-patch' ' test_create_repo conflict-merge && ( @@ -311,4 +355,20 @@ test_expect_success 'rebase--merge.sh and --show-current-patch' ' ) ' +test_expect_success 'rebase -c rebase.useBuiltin=false warning' ' + expected="rebase.useBuiltin support has been removed" && + + # Only warn when the legacy rebase is requested... + test_must_fail git -c rebase.useBuiltin=false rebase 2>err && + test_i18ngrep "$expected" err && + test_must_fail env GIT_TEST_REBASE_USE_BUILTIN=false git rebase 2>err && + test_i18ngrep "$expected" err && + + # ...not when we would have used the built-in anyway + test_must_fail git -c rebase.useBuiltin=true rebase 2>err && + test_must_be_empty err && + test_must_fail env GIT_TEST_REBASE_USE_BUILTIN=true git rebase 2>err && + test_must_be_empty err +' + test_done diff --git a/t/t3401-rebase-and-am-rename.sh b/t/t3401-rebase-and-am-rename.sh index e0b5111993..a0b9438b22 100755 --- a/t/t3401-rebase-and-am-rename.sh +++ b/t/t3401-rebase-and-am-rename.sh @@ -42,7 +42,7 @@ test_expect_success 'rebase --interactive: directory rename detected' ' git checkout B^0 && set_fake_editor && - FAKE_LINES="1" git rebase --interactive A && + FAKE_LINES="1" git -c merge.directoryRenames=true rebase --interactive A && git ls-files -s >out && test_line_count = 5 out && @@ -58,7 +58,7 @@ test_expect_failure 'rebase (am): directory rename detected' ' git checkout B^0 && - git rebase A && + git -c merge.directoryRenames=true rebase A && git ls-files -s >out && test_line_count = 5 out && @@ -74,7 +74,7 @@ test_expect_success 'rebase --merge: directory rename detected' ' git checkout B^0 && - git rebase --merge A && + git -c merge.directoryRenames=true rebase --merge A && git ls-files -s >out && test_line_count = 5 out && @@ -92,7 +92,7 @@ test_expect_failure 'am: directory rename detected' ' git format-patch -1 B && - git am --3way 0001*.patch && + git -c merge.directoryRenames=true am --3way 0001*.patch && git ls-files -s >out && test_line_count = 5 out && diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 52fa41c707..29a35840ed 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -29,9 +29,6 @@ Initial setup: . "$TEST_DIRECTORY"/lib-rebase.sh -# WARNING: Modifications to the initial repository can change the SHA ID used -# in the expect2 file for the 'stop on conflicting pick' test. - test_expect_success 'setup' ' test_commit A file1 && test_commit B file1 && @@ -75,11 +72,10 @@ test_expect_success 'rebase --keep-empty' ' test_line_count = 6 actual ' -cat > expect <<EOF -error: nothing to do -EOF - test_expect_success 'rebase -i with empty HEAD' ' + cat >expect <<-\EOF && + error: nothing to do + EOF set_fake_editor && test_must_fail env FAKE_LINES="1 exec_true" git rebase -i HEAD^ >actual 2>&1 && test_i18ncmp expect actual @@ -149,18 +145,16 @@ test_expect_success 'rebase -i with the exec command checks tree cleanness' ' test_expect_success 'rebase -x with empty command fails' ' test_when_finished "git rebase --abort ||:" && - test_must_fail git rebase -x "" @ 2>actual && + test_must_fail env git rebase -x "" @ 2>actual && test_write_lines "error: empty exec command" >expected && test_i18ncmp expected actual && - test_must_fail git rebase -x " " @ 2>actual && + test_must_fail env git rebase -x " " @ 2>actual && test_i18ncmp expected actual ' -LF=' -' test_expect_success 'rebase -x with newline in command fails' ' test_when_finished "git rebase --abort ||:" && - test_must_fail git rebase -x "a${LF}b" @ 2>actual && + test_must_fail env git rebase -x "a${LF}b" @ 2>actual && test_write_lines "error: exec commands cannot contain newlines" \ >expected && test_i18ncmp expected actual @@ -234,28 +228,29 @@ test_expect_success 'exchange two commits' ' set_fake_editor && FAKE_LINES="2 1" git rebase -i HEAD~2 && test H = $(git cat-file commit HEAD^ | sed -ne \$p) && - test G = $(git cat-file commit HEAD | sed -ne \$p) + test G = $(git cat-file commit HEAD | sed -ne \$p) && + blob1=$(git rev-parse --short HEAD^:file1) && + blob2=$(git rev-parse --short HEAD:file1) && + commit=$(git rev-parse --short HEAD) ' -cat > expect << EOF -diff --git a/file1 b/file1 -index f70f10e..fd79235 100644 ---- a/file1 -+++ b/file1 -@@ -1 +1 @@ --A -+G -EOF - -cat > expect2 << EOF -<<<<<<< HEAD -D -======= -G ->>>>>>> 5d18e54... G -EOF - test_expect_success 'stop on conflicting pick' ' + cat >expect <<-EOF && + diff --git a/file1 b/file1 + index $blob1..$blob2 100644 + --- a/file1 + +++ b/file1 + @@ -1 +1 @@ + -A + +G + EOF + cat >expect2 <<-EOF && + <<<<<<< HEAD + D + ======= + G + >>>>>>> $commit... G + EOF git tag new-branch1 && set_fake_editor && test_must_fail git rebase -i master && @@ -495,15 +490,14 @@ test_expect_success 'commit message retained after conflict' ' git branch -D conflict-squash ' -cat > expect-squash-fixup << EOF -B - -D +test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' ' + cat >expect-squash-fixup <<-\EOF && + B -ONCE -EOF + D -test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' ' + ONCE + EOF git checkout -b squash-fixup E && base=$(git rev-parse HEAD~4) && set_fake_editor && @@ -799,13 +793,12 @@ test_expect_success 'rebase -i can copy notes' ' test "a note" = "$(git notes show HEAD)" ' -cat >expect <<EOF -an earlier note - -a note -EOF - test_expect_success 'rebase -i can copy notes over a fixup' ' + cat >expect <<-\EOF && + an earlier note + + a note + EOF git reset --hard n3 && git notes add -m"an earlier note" n2 && set_fake_editor && @@ -1008,7 +1001,7 @@ test_expect_success 'rebase -i --root temporary sentinel commit' ' git checkout B && set_fake_editor && test_must_fail env FAKE_LINES="2" git rebase -i --root && - git cat-file commit HEAD | grep "^tree 4b825dc642cb" && + git cat-file commit HEAD | grep "^tree $EMPTY_TREE" && git rebase --abort ' @@ -1031,7 +1024,7 @@ test_expect_success 'rebase -i --root reword root commit' ' test -z "$(git show -s --format=%p HEAD^)" ' -test_expect_success 'rebase -i --root when root has untracked file confilct' ' +test_expect_success 'rebase -i --root when root has untracked file conflict' ' test_when_finished "reset_rebase" && git checkout -b failing-root-pick A && echo x >file2 && @@ -1063,7 +1056,7 @@ test_expect_success C_LOCALE_OUTPUT 'rebase --edit-todo does not work on non-int git reset --hard && git checkout conflict-branch && set_fake_editor && - test_must_fail git rebase --onto HEAD~2 HEAD~ && + test_must_fail git rebase -f --onto HEAD~2 HEAD~ && test_must_fail git rebase --edit-todo && git rebase --abort ' @@ -1166,7 +1159,7 @@ test_expect_success 'rebase -i error on commits with \ in message' ' test_expect_code 1 grep " emp" error ' -test_expect_success 'short SHA-1 setup' ' +test_expect_success SHA1 'short SHA-1 setup' ' test_when_finished "git checkout master" && git checkout --orphan collide && git rm -rf . && @@ -1178,7 +1171,7 @@ test_expect_success 'short SHA-1 setup' ' ) ' -test_expect_success 'short SHA-1 collide' ' +test_expect_success SHA1 'short SHA-1 collide' ' test_when_finished "reset_rebase && git checkout master" && git checkout collide && ( @@ -1304,52 +1297,37 @@ test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' actual ' -cat >expect <<EOF -Warning: some commits may have been dropped accidentally. -Dropped commits (newer to older): - - $(git rev-list --pretty=oneline --abbrev-commit -1 master) -To avoid this message, use "drop" to explicitly remove a commit. - -Use 'git config rebase.missingCommitsCheck' to change the level of warnings. -The possible behaviours are: ignore, warn, error. - -Rebasing (1/4) -Rebasing (2/4) -Rebasing (3/4) -Rebasing (4/4) -Successfully rebased and updated refs/heads/missing-commit. -EOF - -cr_to_nl () { - tr '\015' '\012' -} - test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' ' + cat >expect <<-EOF && + Warning: some commits may have been dropped accidentally. + Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + To avoid this message, use "drop" to explicitly remove a commit. + EOF test_config rebase.missingCommitsCheck warn && rebase_setup_and_clean missing-commit && set_fake_editor && FAKE_LINES="1 2 3 4" \ git rebase -i --root 2>actual.2 && - cr_to_nl <actual.2 >actual && + head -n4 actual.2 >actual && test_i18ncmp expect actual && test D = $(git cat-file commit HEAD | sed -ne \$p) ' -cat >expect <<EOF -Warning: some commits may have been dropped accidentally. -Dropped commits (newer to older): - - $(git rev-list --pretty=oneline --abbrev-commit -1 master) - - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2) -To avoid this message, use "drop" to explicitly remove a commit. - -Use 'git config rebase.missingCommitsCheck' to change the level of warnings. -The possible behaviours are: ignore, warn, error. - -You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. -Or you can abort the rebase with 'git rebase --abort'. -EOF - test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' ' + cat >expect <<-EOF && + Warning: some commits may have been dropped accidentally. + Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2) + To avoid this message, use "drop" to explicitly remove a commit. + + Use '\''git config rebase.missingCommitsCheck'\'' to change the level of warnings. + The possible behaviours are: ignore, warn, error. + + You can fix this with '\''git rebase --edit-todo'\'' and then run '\''git rebase --continue'\''. + Or you can abort the rebase with '\''git rebase --abort'\''. + EOF test_config rebase.missingCommitsCheck error && rebase_setup_and_clean missing-commit && set_fake_editor && @@ -1439,7 +1417,6 @@ test_expect_success 'editor saves as CR/LF' ' ) ' -SQ="'" test_expect_success 'rebase -i --gpg-sign=<key-id>' ' test_when_finished "test_might_fail git rebase --abort" && set_fake_editor && diff --git a/t/t3415-rebase-autosquash.sh b/t/t3415-rebase-autosquash.sh index 13f5688135..22d218698e 100755 --- a/t/t3415-rebase-autosquash.sh +++ b/t/t3415-rebase-autosquash.sh @@ -277,7 +277,7 @@ test_expect_success 'autosquash with empty custom instructionFormat' ' ( set_cat_todo_editor && test_must_fail git -c rebase.instructionFormat= \ - rebase --autosquash --force -i HEAD^ >actual && + rebase --autosquash --force-rebase -i HEAD^ >actual && git log -1 --format="pick %h %s" >expect && test_cmp expect actual ) diff --git a/t/t3416-rebase-onto-threedots.sh b/t/t3416-rebase-onto-threedots.sh index ddf2f64853..9c2548423b 100755 --- a/t/t3416-rebase-onto-threedots.sh +++ b/t/t3416-rebase-onto-threedots.sh @@ -99,7 +99,64 @@ test_expect_success 'rebase -i --onto master...side' ' git checkout side && git reset --hard K && + set_fake_editor && test_must_fail git rebase -i --onto master...side J ' +test_expect_success 'rebase --keep-base --onto incompatible' ' + test_must_fail git rebase --keep-base --onto master... +' + +test_expect_success 'rebase --keep-base --root incompatible' ' + test_must_fail git rebase --keep-base --root +' + +test_expect_success 'rebase --keep-base master from topic' ' + git reset --hard && + git checkout topic && + git reset --hard G && + + git rebase --keep-base master && + git rev-parse C >base.expect && + git merge-base master HEAD >base.actual && + test_cmp base.expect base.actual && + + git rev-parse HEAD~2 >actual && + git rev-parse C^0 >expect && + test_cmp expect actual +' + +test_expect_success 'rebase --keep-base master from side' ' + git reset --hard && + git checkout side && + git reset --hard K && + + test_must_fail git rebase --keep-base master +' + +test_expect_success 'rebase -i --keep-base master from topic' ' + git reset --hard && + git checkout topic && + git reset --hard G && + + set_fake_editor && + EXPECT_COUNT=2 git rebase -i --keep-base master && + git rev-parse C >base.expect && + git merge-base master HEAD >base.actual && + test_cmp base.expect base.actual && + + git rev-parse HEAD~2 >actual && + git rev-parse C^0 >expect && + test_cmp expect actual +' + +test_expect_success 'rebase -i --keep-base master from side' ' + git reset --hard && + git checkout side && + git reset --hard K && + + set_fake_editor && + test_must_fail git rebase -i --keep-base master +' + test_done diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh index 25aaacacfc..7a2da972fd 100755 --- a/t/t3418-rebase-continue.sh +++ b/t/t3418-rebase-continue.sh @@ -120,6 +120,20 @@ test_expect_success REBASE_P 'rebase passes merge strategy options correctly' ' git rebase --continue ' +test_expect_success 'rebase -r passes merge strategy options correctly' ' + rm -fr .git/rebase-* && + git reset --hard commit-new-file-F3-on-topic-branch && + test_commit merge-theirs && + git reset --hard HEAD^ && + test_commit some-other-commit && + test_tick && + git merge --no-ff merge-theirs && + FAKE_LINES="1 3 edit 4 5 7 8 9" git rebase -i -f -r -m \ + -s recursive --strategy-option=theirs HEAD~2 && + test_commit force-change-ours && + git rebase --continue +' + test_expect_success '--skip after failed fixup cleans commit message' ' test_when_finished "test_might_fail git rebase --abort" && git checkout -b with-conflicting-fixup && @@ -262,10 +276,15 @@ test_expect_success '--reschedule-failed-exec' ' test_must_fail git -c rebase.rescheduleFailedExec=true \ rebase -x false HEAD^ 2>err && grep "^exec false" .git/rebase-merge/git-rebase-todo && - test_i18ngrep "has been rescheduled" err && - git rebase --abort && - test_must_fail git rebase -y false HEAD^ 2>err && test_i18ngrep "has been rescheduled" err ' +test_expect_success 'rebase.reschedulefailedexec only affects `rebase -i`' ' + test_config rebase.reschedulefailedexec true && + test_must_fail git rebase -x false HEAD^ && + grep "^exec false" .git/rebase-merge/git-rebase-todo && + git rebase --abort && + git rebase HEAD^ +' + test_done diff --git a/t/t3420-rebase-autostash.sh b/t/t3420-rebase-autostash.sh index 2d1094e483..5f7e73cf83 100755 --- a/t/t3420-rebase-autostash.sh +++ b/t/t3420-rebase-autostash.sh @@ -30,13 +30,13 @@ test_expect_success setup ' echo conflicting-change >file2 && git add . && test_tick && - git commit -m "related commit" + git commit -m "related commit" && + remove_progress_re="$(printf "s/.*\\r//")" ' create_expected_success_am () { cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit First, rewinding head to replay your work on top of it... Applying: second commit Applying: third commit @@ -47,8 +47,7 @@ create_expected_success_am () { create_expected_success_interactive () { q_to_cr >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit - Rebasing (1/2)QRebasing (2/2)QApplied autostash. + Applied autostash. Successfully rebased and updated refs/heads/rebased-feature-branch. EOF } @@ -56,7 +55,6 @@ create_expected_success_interactive () { create_expected_failure_am () { cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit First, rewinding head to replay your work on top of it... Applying: second commit Applying: third commit @@ -67,10 +65,9 @@ create_expected_failure_am () { } create_expected_failure_interactive () { - q_to_cr >expected <<-EOF + cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit - Rebasing (1/2)QRebasing (2/2)QApplying autostash resulted in conflicts. + Applying autostash resulted in conflicts. Your changes are safe in the stash. You can run "git stash pop" or "git stash drop" at any time. Successfully rebased and updated refs/heads/rebased-feature-branch. @@ -109,7 +106,8 @@ testrebase () { suffix=interactive fi && create_expected_success_$suffix && - test_i18ncmp expected actual + sed "$remove_progress_re" <actual >actual2 && + test_i18ncmp expected actual2 ' test_expect_success "rebase$type: dirty index, non-conflicting rebase" ' @@ -209,7 +207,8 @@ testrebase () { suffix=interactive fi && create_expected_failure_$suffix && - test_i18ncmp expected actual + sed "$remove_progress_re" <actual >actual2 && + test_i18ncmp expected actual2 ' } @@ -303,4 +302,12 @@ test_expect_success 'branch is left alone when possible' ' test unchanged-branch = "$(git rev-parse --abbrev-ref HEAD)" ' +test_expect_success 'never change active branch' ' + git checkout -b not-the-feature-branch unrelated-onto-branch && + test_when_finished "git reset --hard && git checkout master" && + echo changed >file0 && + git rebase --autostash not-the-feature-branch feature-branch && + test_cmp_rev not-the-feature-branch unrelated-onto-branch +' + test_done diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index 7274dca40b..b847064f91 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -31,6 +31,16 @@ test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p +test_expect_success 'setup branches and remote tracking' ' + git tag -l >tags && + for tag in $(cat tags) + do + git branch branch-$tag $tag || return 1 + done && + git remote add origin "file://$PWD" && + git fetch origin +' + test_run_rebase () { result=$1 shift @@ -57,6 +67,7 @@ test_run_rebase () { " } test_run_rebase success '' +test_run_rebase success --fork-point test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase failure -p @@ -64,6 +75,23 @@ test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 shift + test_expect_$result "rebase $* -f rewrites even if remote upstream is an ancestor" " + reset_rebase && + git rebase $* -f branch-b branch-e && + ! test_cmp_rev branch-e origin/branch-e && + test_cmp_rev branch-b HEAD~2 && + test_linear_range 'd e' branch-b.. + " +} +test_run_rebase success '' +test_run_rebase success --fork-point +test_run_rebase success -m +test_run_rebase success -i +test_have_prereq !REBASE_P || test_run_rebase success -p + +test_run_rebase () { + result=$1 + shift test_expect_$result "rebase $* fast-forwards from ancestor of upstream" " reset_rebase && git rebase $* e b && @@ -71,6 +99,7 @@ test_run_rebase () { " } test_run_rebase success '' +test_run_rebase success --fork-point test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p diff --git a/t/t3422-rebase-incompatible-options.sh b/t/t3422-rebase-incompatible-options.sh index bb78a6ec86..50e7960702 100755 --- a/t/t3422-rebase-incompatible-options.sh +++ b/t/t3422-rebase-incompatible-options.sh @@ -65,24 +65,15 @@ test_rebase_am_only --ignore-whitespace test_rebase_am_only --committer-date-is-author-date test_rebase_am_only -C4 -test_expect_success '--preserve-merges incompatible with --signoff' ' +test_expect_success REBASE_P '--preserve-merges incompatible with --signoff' ' git checkout B^0 && test_must_fail git rebase --preserve-merges --signoff A ' -test_expect_success '--preserve-merges incompatible with --rebase-merges' ' +test_expect_success REBASE_P \ + '--preserve-merges incompatible with --rebase-merges' ' git checkout B^0 && test_must_fail git rebase --preserve-merges --rebase-merges A ' -test_expect_success '--rebase-merges incompatible with --strategy' ' - git checkout B^0 && - test_must_fail git rebase --rebase-merges -s resolve A -' - -test_expect_success '--rebase-merges incompatible with --strategy-option' ' - git checkout B^0 && - test_must_fail git rebase --rebase-merges -Xignore-space-change A -' - test_done diff --git a/t/t3427-rebase-subtree.sh b/t/t3427-rebase-subtree.sh index 3780877e4e..bec48e6a1f 100755 --- a/t/t3427-rebase-subtree.sh +++ b/t/t3427-rebase-subtree.sh @@ -11,108 +11,99 @@ commit_message() { git log --pretty=format:%s -1 "$1" } +# There are a few bugs in the rebase with regards to the subtree strategy, and +# this test script tries to document them. First, the following commit history +# is generated (the onelines are shown, time flows from left to right): +# +# master1 - master2 - master3 +# \ +# README ---------------------- Add subproject master - master4 - files_subtree/master5 +# +# Where the merge moves the files master[123].t into the subdirectory +# files_subtree/ and master4 as well as files_subtree/master5 add files to that +# directory directly. +# +# Then, in subsequent test cases, `git filter-branch` is used to distill just +# the commits that touch files_subtree/. To give it a final pre-rebase touch, +# an empty commit is added on top. The pre-rebase commit history looks like +# this: +# +# Add subproject master - master4 - files_subtree/master5 - Empty commit +# +# where the root commit adds three files: master1.t, master2.t and master3.t. +# +# This commit history is then rebased onto `master3` with the +# `-Xsubtree=files_subtree` option in three different ways: +# +# 1. using `--preserve-merges` +# 2. using `--preserve-merges` and --keep-empty +# 3. without specifying a rebase backend + test_expect_success 'setup' ' test_commit README && - mkdir files && - ( - cd files && - git init && - test_commit master1 && - test_commit master2 && - test_commit master3 - ) && - git fetch files master && - git branch files-master FETCH_HEAD && - git read-tree --prefix=files_subtree files-master && - git checkout -- files_subtree && - tree=$(git write-tree) && - head=$(git rev-parse HEAD) && - rev=$(git rev-parse --verify files-master^0) && - commit=$(git commit-tree -p $head -p $rev -m "Add subproject master" $tree) && - git update-ref HEAD $commit && - ( - cd files_subtree && - test_commit master4 - ) && - test_commit files_subtree/master5 -' -# FAILURE: Does not preserve master4. -test_expect_failure 'Rebase -Xsubtree --preserve-merges --onto commit 4' ' - reset_rebase && - git checkout -b rebase-preserve-merges-4 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --preserve-merges --onto files-master master && - verbose test "$(commit_message HEAD~)" = "files_subtree/master4" + git init files && + test_commit -C files master1 && + test_commit -C files master2 && + test_commit -C files master3 && + + : perform subtree merge into files_subtree/ && + git fetch files refs/heads/master:refs/heads/files-master && + git merge -s ours --no-commit --allow-unrelated-histories \ + files-master && + git read-tree --prefix=files_subtree -u files-master && + git commit -m "Add subproject master" && + + : add two extra commits to rebase && + test_commit -C files_subtree master4 && + test_commit files_subtree/master5 && + + git checkout -b to-rebase && + git fast-export --no-data HEAD -- files_subtree/ | + sed -e "s%\([0-9a-f]\{40\} \)files_subtree/%\1%" | + git fast-import --force --quiet && + git reset --hard && + git commit -m "Empty commit" --allow-empty ' -# FAILURE: Does not preserve master5. -test_expect_failure 'Rebase -Xsubtree --preserve-merges --onto commit 5' ' +# FAILURE: Does not preserve master4. +test_expect_failure REBASE_P 'Rebase -Xsubtree --preserve-merges --onto commit' ' reset_rebase && - git checkout -b rebase-preserve-merges-5 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && + git checkout -b rebase-preserve-merges to-rebase && git rebase -Xsubtree=files_subtree --preserve-merges --onto files-master master && + verbose test "$(commit_message HEAD~)" = "master4" && verbose test "$(commit_message HEAD)" = "files_subtree/master5" ' # FAILURE: Does not preserve master4. -test_expect_failure 'Rebase -Xsubtree --keep-empty --preserve-merges --onto commit 4' ' - reset_rebase && - git checkout -b rebase-keep-empty-4 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master && - verbose test "$(commit_message HEAD~2)" = "files_subtree/master4" -' - -# FAILURE: Does not preserve master5. -test_expect_failure 'Rebase -Xsubtree --keep-empty --preserve-merges --onto commit 5' ' - reset_rebase && - git checkout -b rebase-keep-empty-5 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master && - verbose test "$(commit_message HEAD~)" = "files_subtree/master5" -' - -# FAILURE: Does not preserve Empty. -test_expect_failure 'Rebase -Xsubtree --keep-empty --preserve-merges --onto empty commit' ' +test_expect_failure REBASE_P 'Rebase -Xsubtree --keep-empty --preserve-merges --onto commit' ' reset_rebase && - git checkout -b rebase-keep-empty-empty master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && + git checkout -b rebase-keep-empty to-rebase && git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master && + verbose test "$(commit_message HEAD~2)" = "master4" && + verbose test "$(commit_message HEAD~)" = "files_subtree/master5" && verbose test "$(commit_message HEAD)" = "Empty commit" ' -# FAILURE: fatal: Could not parse object -test_expect_failure 'Rebase -Xsubtree --onto commit 4' ' +test_expect_success 'Rebase -Xsubtree --keep-empty --onto commit' ' reset_rebase && - git checkout -b rebase-onto-4 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --onto files-master master && - verbose test "$(commit_message HEAD~2)" = "files_subtree/master4" + git checkout -b rebase-onto to-rebase && + test_must_fail git rebase -Xsubtree=files_subtree --keep-empty --onto files-master master && + : first pick results in no changes && + git rebase --continue && + verbose test "$(commit_message HEAD~2)" = "master4" && + verbose test "$(commit_message HEAD~)" = "files_subtree/master5" && + verbose test "$(commit_message HEAD)" = "Empty commit" ' -# FAILURE: fatal: Could not parse object -test_expect_failure 'Rebase -Xsubtree --onto commit 5' ' - reset_rebase && - git checkout -b rebase-onto-5 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --onto files-master master && - verbose test "$(commit_message HEAD~)" = "files_subtree/master5" -' -# FAILURE: fatal: Could not parse object -test_expect_failure 'Rebase -Xsubtree --onto empty commit' ' +test_expect_success 'Rebase -Xsubtree --keep-empty --rebase-merges --onto commit' ' reset_rebase && - git checkout -b rebase-onto-empty master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --onto files-master master && + git checkout -b rebase-merges-onto to-rebase && + test_must_fail git rebase -Xsubtree=files_subtree --keep-empty --rebase-merges --onto files-master --root && + : first pick results in no changes && + git rebase --continue && + verbose test "$(commit_message HEAD~2)" = "master4" && + verbose test "$(commit_message HEAD~)" = "files_subtree/master5" && verbose test "$(commit_message HEAD)" = "Empty commit" ' diff --git a/t/t3429-rebase-edit-todo.sh b/t/t3429-rebase-edit-todo.sh index b9292dfc2a..76f6d306ea 100755 --- a/t/t3429-rebase-edit-todo.sh +++ b/t/t3429-rebase-edit-todo.sh @@ -11,4 +11,26 @@ test_expect_success 'rebase exec modifies rebase-todo' ' test -e F ' +test_expect_success SHA1 'loose object cache vs re-reading todo list' ' + GIT_REBASE_TODO=.git/rebase-merge/git-rebase-todo && + export GIT_REBASE_TODO && + write_script append-todo.sh <<-\EOS && + # For values 5 and 6, this yields SHA-1s with the same first two digits + echo "pick $(git rev-parse --short \ + $(printf "%s\\n" \ + "tree $EMPTY_TREE" \ + "author A U Thor <author@example.org> $1 +0000" \ + "committer A U Thor <author@example.org> $1 +0000" \ + "" \ + "$1" | + git hash-object -t commit -w --stdin))" >>$GIT_REBASE_TODO + + shift + test -z "$*" || + echo "exec $0 $*" >>$GIT_REBASE_TODO + EOS + + git rebase HEAD -x "./append-todo.sh 5 6" +' + test_done diff --git a/t/t3430-rebase-merges.sh b/t/t3430-rebase-merges.sh index 4c69255ee6..9efcf4808a 100755 --- a/t/t3430-rebase-merges.sh +++ b/t/t3430-rebase-merges.sh @@ -37,20 +37,27 @@ test_expect_success 'setup' ' test_commit A && git checkout -b first && test_commit B && + b=$(git rev-parse --short HEAD) && git checkout master && test_commit C && + c=$(git rev-parse --short HEAD) && test_commit D && + d=$(git rev-parse --short HEAD) && git merge --no-commit B && test_tick && git commit -m E && git tag -m E E && + e=$(git rev-parse --short HEAD) && git checkout -b second C && test_commit F && + f=$(git rev-parse --short HEAD) && test_commit G && + g=$(git rev-parse --short HEAD) && git checkout master && git merge --no-commit G && test_tick && git commit -m H && + h=$(git rev-parse --short HEAD) && git tag -m H H && git checkout A && test_commit conflicting-G G.t @@ -93,24 +100,24 @@ test_expect_success 'create completely different structure' ' ' test_expect_success 'generate correct todo list' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && label onto reset onto - pick d9df450 B + pick $b B label E reset onto - pick 5dee784 C + pick $c C label branch-point - pick ca2c861 F - pick 088b00a G + pick $f F + pick $g G label H reset branch-point # C - pick 12bd07b D - merge -C 2051b56 E # E - merge -C 233d48a H # H + pick $d D + merge -C $e E # E + merge -C $h H # H EOF @@ -151,7 +158,6 @@ test_expect_success 'failed `merge -C` writes patch (may be rescheduled, too)' ' test_path_is_file .git/rebase-merge/patch ' -SQ="'" test_expect_success 'failed `merge <branch>` does not crash' ' test_when_finished "test_might_fail git rebase --abort" && git checkout conflicting-G && @@ -164,6 +170,19 @@ test_expect_success 'failed `merge <branch>` does not crash' ' grep "^Merge branch ${SQ}G${SQ}$" .git/rebase-merge/message ' +test_expect_success 'fast-forward merge -c still rewords' ' + git checkout -b fast-forward-merge-c H && + ( + set_fake_editor && + FAKE_COMMIT_MESSAGE=edited \ + GIT_SEQUENCE_EDITOR="echo merge -c H G >" \ + git rebase -ir @^ + ) && + echo edited >expected && + git log --pretty=format:%B -1 >actual && + test_cmp expected actual +' + test_expect_success 'with a branch tip that was cherry-picked already' ' git checkout -b already-upstream master && base="$(git rev-parse --verify HEAD)" && @@ -224,8 +243,24 @@ test_expect_success 'refs/rewritten/* is worktree-local' ' test_cmp_rev HEAD "$(cat wt/b)" ' +test_expect_success '--abort cleans up refs/rewritten' ' + git checkout -b abort-cleans-refs-rewritten H && + GIT_SEQUENCE_EDITOR="echo break >>" git rebase -ir @^ && + git rev-parse --verify refs/rewritten/onto && + git rebase --abort && + test_must_fail git rev-parse --verify refs/rewritten/onto +' + +test_expect_success '--quit cleans up refs/rewritten' ' + git checkout -b quit-cleans-refs-rewritten H && + GIT_SEQUENCE_EDITOR="echo break >>" git rebase -ir @^ && + git rev-parse --verify refs/rewritten/onto && + git rebase --quit && + test_must_fail git rev-parse --verify refs/rewritten/onto +' + test_expect_success 'post-rewrite hook and fixups work for merges' ' - git checkout -b post-rewrite && + git checkout -b post-rewrite H && test_commit same1 && git reset --hard HEAD^ && test_commit same2 && @@ -271,7 +306,7 @@ test_expect_success 'root commits' ' EOF test_config sequence.editor \""$PWD"/replace-editor.sh\" && test_tick && - git rebase -i --force --root -r && + git rebase -i --force-rebase --root -r && test "Parsnip" = "$(git show -s --format=%an HEAD^)" && test $(git rev-parse second-root^0) != $(git rev-parse HEAD^) && test $(git rev-parse second-root:second-root.t) = \ @@ -364,7 +399,7 @@ test_expect_success 'octopus merges' ' test_cmp_rev HEAD $before && test_tick && - git rebase -i --force -r HEAD^^ && + git rebase -i --force-rebase -r HEAD^^ && test "Hank" = "$(git show -s --format=%an HEAD)" && test "$before" != $(git rev-parse HEAD) && test_cmp_graph HEAD^^.. <<-\EOF @@ -412,4 +447,25 @@ test_expect_success '--continue after resolving conflicts after a merge' ' test_path_is_missing .git/MERGE_HEAD ' +test_expect_success '--rebase-merges with strategies' ' + git checkout -b with-a-strategy F && + test_tick && + git merge -m "Merge conflicting-G" conflicting-G && + + : first, test with a merge strategy option && + git rebase -ir -Xtheirs G && + echo conflicting-G >expect && + test_cmp expect G.t && + + : now, try with a merge strategy other than recursive && + git reset --hard @{1} && + write_script git-merge-override <<-\EOF && + echo overridden$1 >>G.t + git add G.t + EOF + PATH="$PWD:$PATH" git rebase -ir -s override -Xxopt G && + test_write_lines G overridden--xopt >expect && + test_cmp expect G.t +' + test_done diff --git a/t/t3431-rebase-fork-point.sh b/t/t3431-rebase-fork-point.sh new file mode 100755 index 0000000000..78851b9a2a --- /dev/null +++ b/t/t3431-rebase-fork-point.sh @@ -0,0 +1,57 @@ +#!/bin/sh +# +# Copyright (c) 2019 Denton Liu +# + +test_description='git rebase --fork-point test' + +. ./test-lib.sh + +# A---B---D---E (master) +# \ +# C*---F---G (side) +# +# C was formerly part of master but master was rewound to remove C +# +test_expect_success setup ' + test_commit A && + test_commit B && + test_commit C && + git branch -t side && + git reset --hard HEAD^ && + test_commit D && + test_commit E && + git checkout side && + test_commit F && + test_commit G +' + +test_rebase () { + expected="$1" && + shift && + test_expect_success "git rebase $*" " + git checkout master && + git reset --hard E && + git checkout side && + git reset --hard G && + git rebase $* && + test_write_lines $expected >expect && + git log --pretty=%s >actual && + test_cmp expect actual + " +} + +test_rebase 'G F E D B A' +test_rebase 'G F D B A' --onto D +test_rebase 'G F B A' --keep-base +test_rebase 'G F C E D B A' --no-fork-point +test_rebase 'G F C D B A' --no-fork-point --onto D +test_rebase 'G F C B A' --no-fork-point --keep-base +test_rebase 'G F E D B A' --fork-point refs/heads/master +test_rebase 'G F D B A' --fork-point --onto D refs/heads/master +test_rebase 'G F B A' --fork-point --keep-base refs/heads/master +test_rebase 'G F C E D B A' refs/heads/master +test_rebase 'G F C D B A' --onto D refs/heads/master +test_rebase 'G F C B A' --keep-base refs/heads/master + +test_done diff --git a/t/t3432-rebase-fast-forward.sh b/t/t3432-rebase-fast-forward.sh new file mode 100755 index 0000000000..034ffc7e76 --- /dev/null +++ b/t/t3432-rebase-fast-forward.sh @@ -0,0 +1,125 @@ +#!/bin/sh +# +# Copyright (c) 2019 Denton Liu +# + +test_description='ensure rebase fast-forwards commits when possible' + +. ./test-lib.sh + +test_expect_success setup ' + test_commit A && + test_commit B && + test_commit C && + test_commit D && + git checkout -t -b side +' + +test_rebase_same_head () { + status_n="$1" && + shift && + what_n="$1" && + shift && + cmp_n="$1" && + shift && + status_f="$1" && + shift && + what_f="$1" && + shift && + cmp_f="$1" && + shift && + test_rebase_same_head_ $status_n $what_n $cmp_n "" "$*" && + test_rebase_same_head_ $status_f $what_f $cmp_f " --no-ff" "$*" +} + +test_rebase_same_head_ () { + status="$1" && + shift && + what="$1" && + shift && + cmp="$1" && + shift && + flag="$1" + shift && + test_expect_$status "git rebase$flag $* with $changes is $what with $cmp HEAD" " + oldhead=\$(git rev-parse HEAD) && + test_when_finished 'git reset --hard \$oldhead' && + git rebase$flag $* >stdout && + if test $what = work + then + # Must check this case first, for 'is up to + # date, rebase forced[...]rewinding head' cases + test_i18ngrep 'rewinding head' stdout + elif test $what = noop + then + test_i18ngrep 'is up to date' stdout && + test_i18ngrep ! 'rebase forced' stdout + elif test $what = noop-force + then + test_i18ngrep 'is up to date, rebase forced' stdout + fi && + newhead=\$(git rev-parse HEAD) && + if test $cmp = same + then + test_cmp_rev \$oldhead \$newhead + elif test $cmp = diff + then + ! test_cmp_rev \$oldhead \$newhead + fi + " +} + +changes='no changes' +test_rebase_same_head success noop same success work same +test_rebase_same_head success noop same success noop-force same master +test_rebase_same_head success noop same success noop-force diff --onto B B +test_rebase_same_head success noop same success noop-force diff --onto B... B +test_rebase_same_head success noop same success noop-force same --onto master... master +test_rebase_same_head success noop same success noop-force same --keep-base master +test_rebase_same_head success noop same success noop-force same --keep-base +test_rebase_same_head success noop same success noop-force same --no-fork-point +test_rebase_same_head success noop same success noop-force same --keep-base --no-fork-point +test_rebase_same_head success noop same success work same --fork-point master +test_rebase_same_head success noop same success work diff --fork-point --onto B B +test_rebase_same_head success noop same success work diff --fork-point --onto B... B +test_rebase_same_head success noop same success work same --fork-point --onto master... master +test_rebase_same_head success noop same success work same --keep-base --keep-base master + +test_expect_success 'add work same to side' ' + test_commit E +' + +changes='our changes' +test_rebase_same_head success noop same success work same +test_rebase_same_head success noop same success noop-force same master +test_rebase_same_head success noop same success noop-force diff --onto B B +test_rebase_same_head success noop same success noop-force diff --onto B... B +test_rebase_same_head success noop same success noop-force same --onto master... master +test_rebase_same_head success noop same success noop-force same --keep-base master +test_rebase_same_head success noop same success noop-force same --keep-base +test_rebase_same_head success noop same success noop-force same --no-fork-point +test_rebase_same_head success noop same success noop-force same --keep-base --no-fork-point +test_rebase_same_head success noop same success work same --fork-point master +test_rebase_same_head success noop same success work diff --fork-point --onto B B +test_rebase_same_head success noop same success work diff --fork-point --onto B... B +test_rebase_same_head success noop same success work same --fork-point --onto master... master +test_rebase_same_head success noop same success work same --fork-point --keep-base master + +test_expect_success 'add work same to upstream' ' + git checkout master && + test_commit F && + git checkout side +' + +changes='our and their changes' +test_rebase_same_head success noop same success noop-force diff --onto B B +test_rebase_same_head success noop same success noop-force diff --onto B... B +test_rebase_same_head success noop same success work diff --onto master... master +test_rebase_same_head success noop same success work diff --keep-base master +test_rebase_same_head success noop same success work diff --keep-base +test_rebase_same_head failure work same success work diff --fork-point --onto B B +test_rebase_same_head failure work same success work diff --fork-point --onto B... B +test_rebase_same_head success noop same success work diff --fork-point --onto master... master +test_rebase_same_head success noop same success work diff --fork-point --keep-base master + +test_done diff --git a/t/t3506-cherry-pick-ff.sh b/t/t3506-cherry-pick-ff.sh index 127dd0082f..9d5adbc130 100755 --- a/t/t3506-cherry-pick-ff.sh +++ b/t/t3506-cherry-pick-ff.sh @@ -16,7 +16,11 @@ test_expect_success setup ' git add file1 && test_tick && git commit -m "second" && - git tag second + git tag second && + test_oid_cache <<-EOF + cp_ff sha1:1df192cd8bc58a2b275d842cede4d221ad9000d1 + cp_ff sha256:e70d6b7fc064bddb516b8d512c9057094b96ce6ff08e12080acc4fe7f1d60a1d + EOF ' test_expect_success 'cherry-pick using --ff fast forwards' ' @@ -102,7 +106,7 @@ test_expect_success 'cherry pick a root commit with --ff' ' git add file2 && git commit --amend -m "file2" && git cherry-pick --ff first && - test "$(git rev-parse --verify HEAD)" = "1df192cd8bc58a2b275d842cede4d221ad9000d1" + test "$(git rev-parse --verify HEAD)" = "$(test_oid cp_ff)" ' test_expect_success 'cherry-pick --ff on unborn branch' ' diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh index 0db166152a..9b9b4ca8d4 100755 --- a/t/t3507-cherry-pick-conflict.sh +++ b/t/t3507-cherry-pick-conflict.sh @@ -25,6 +25,11 @@ test_expect_success setup ' test_commit base foo b && test_commit picked foo c && test_commit --signoff picked-signed foo d && + git checkout -b topic initial && + test_commit redundant-pick foo c redundant && + git commit --allow-empty --allow-empty-message && + git tag empty && + git checkout master && git config advice.detachedhead false ' @@ -88,7 +93,7 @@ test_expect_success 'cherry-pick --no-commit does not set CHERRY_PICK_HEAD' ' test_expect_success 'cherry-pick w/dirty tree does not set CHERRY_PICK_HEAD' ' pristine_detach initial && - echo foo > foo && + echo foo >foo && test_must_fail git cherry-pick base && test_must_fail git rev-parse --verify CHERRY_PICK_HEAD ' @@ -96,7 +101,7 @@ test_expect_success 'cherry-pick w/dirty tree does not set CHERRY_PICK_HEAD' ' test_expect_success \ 'cherry-pick --strategy=resolve w/dirty tree does not set CHERRY_PICK_HEAD' ' pristine_detach initial && - echo foo > foo && + echo foo >foo && test_must_fail git cherry-pick --strategy=resolve base && test_must_fail git rev-parse --verify CHERRY_PICK_HEAD ' @@ -156,6 +161,25 @@ test_expect_success 'successful commit clears CHERRY_PICK_HEAD' ' test_must_fail git rev-parse --verify CHERRY_PICK_HEAD ' +test_expect_success 'successful final commit clears cherry-pick state' ' + pristine_detach initial && + + test_must_fail git cherry-pick base picked-signed && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git commit -a && + test_must_fail test_path_exists .git/sequencer +' + +test_expect_success 'reset after final pick clears cherry-pick state' ' + pristine_detach initial && + + test_must_fail git cherry-pick base picked-signed && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git reset && + test_must_fail test_path_exists .git/sequencer +' test_expect_success 'failed cherry-pick produces dirty index' ' pristine_detach initial && @@ -175,23 +199,63 @@ test_expect_success 'failed cherry-pick registers participants in index' ' git ls-files --stage foo && git checkout picked -- foo && git ls-files --stage foo - } > stages && + } >stages && sed " 1 s/ 0 / 1 / 2 s/ 0 / 2 / 3 s/ 0 / 3 / - " < stages > expected && + " stages >expected && git read-tree -u --reset HEAD && test_must_fail git cherry-pick picked && - git ls-files --stage --unmerged > actual && + git ls-files --stage --unmerged >actual && test_cmp expected actual ' +test_expect_success \ + 'cherry-pick conflict, ensure commit.cleanup = scissors places scissors line properly' ' + pristine_detach initial && + git config commit.cleanup scissors && + cat <<-EOF >expected && + picked + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # foo + EOF + + test_must_fail git cherry-pick picked && + + test_i18ncmp expected .git/MERGE_MSG +' + +test_expect_success \ + 'cherry-pick conflict, ensure cleanup=scissors places scissors line properly' ' + pristine_detach initial && + git config --unset commit.cleanup && + cat <<-EOF >expected && + picked + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # foo + EOF + + test_must_fail git cherry-pick --cleanup=scissors picked && + + test_i18ncmp expected .git/MERGE_MSG +' + test_expect_success 'failed cherry-pick describes conflict in work tree' ' pristine_detach initial && - cat <<-EOF > expected && + cat <<-EOF >expected && <<<<<<< HEAD a ======= @@ -201,14 +265,14 @@ test_expect_success 'failed cherry-pick describes conflict in work tree' ' test_must_fail git cherry-pick picked && - sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + sed "s/[a-f0-9]*\.\.\./objid/" foo >actual && test_cmp expected actual ' test_expect_success 'diff3 -m style' ' pristine_detach initial && git config merge.conflictstyle diff3 && - cat <<-EOF > expected && + cat <<-EOF >expected && <<<<<<< HEAD a ||||||| parent of objid picked @@ -220,14 +284,14 @@ test_expect_success 'diff3 -m style' ' test_must_fail git cherry-pick picked && - sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + sed "s/[a-f0-9]*\.\.\./objid/" foo >actual && test_cmp expected actual ' test_expect_success 'revert also handles conflicts sanely' ' git config --unset merge.conflictstyle && pristine_detach initial && - cat <<-EOF > expected && + cat <<-EOF >expected && <<<<<<< HEAD a ======= @@ -241,24 +305,24 @@ test_expect_success 'revert also handles conflicts sanely' ' git ls-files --stage foo && git checkout base -- foo && git ls-files --stage foo - } > stages && + } >stages && sed " 1 s/ 0 / 1 / 2 s/ 0 / 2 / 3 s/ 0 / 3 / - " < stages > expected-stages && + " stages >expected-stages && git read-tree -u --reset HEAD && head=$(git rev-parse HEAD) && test_must_fail git revert picked && newhead=$(git rev-parse HEAD) && - git ls-files --stage --unmerged > actual-stages && + git ls-files --stage --unmerged >actual-stages && test "$head" = "$newhead" && test_must_fail git update-index --refresh -q && test_must_fail git diff-index --exit-code HEAD && test_cmp expected-stages actual-stages && - sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + sed "s/[a-f0-9]*\.\.\./objid/" foo >actual && test_cmp expected actual ' @@ -284,7 +348,7 @@ test_expect_success 'revert --no-commit sets REVERT_HEAD' ' test_expect_success 'revert w/dirty tree does not set REVERT_HEAD' ' pristine_detach base && - echo foo > foo && + echo foo >foo && test_must_fail git revert base && test_must_fail git rev-parse --verify CHERRY_PICK_HEAD && test_must_fail git rev-parse --verify REVERT_HEAD @@ -316,10 +380,30 @@ test_expect_success 'failed commit does not clear REVERT_HEAD' ' test_cmp_rev picked REVERT_HEAD ' +test_expect_success 'successful final commit clears revert state' ' + pristine_detach picked-signed && + + test_must_fail git revert picked-signed base && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git commit -a && + test_must_fail test_path_exists .git/sequencer +' + +test_expect_success 'reset after final pick clears revert state' ' + pristine_detach picked-signed && + + test_must_fail git revert picked-signed base && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git reset && + test_must_fail test_path_exists .git/sequencer +' + test_expect_success 'revert conflict, diff3 -m style' ' pristine_detach initial && git config merge.conflictstyle diff3 && - cat <<-EOF > expected && + cat <<-EOF >expected && <<<<<<< HEAD a ||||||| objid picked @@ -331,10 +415,56 @@ test_expect_success 'revert conflict, diff3 -m style' ' test_must_fail git revert picked && - sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + sed "s/[a-f0-9]*\.\.\./objid/" foo >actual && test_cmp expected actual ' +test_expect_success \ + 'revert conflict, ensure commit.cleanup = scissors places scissors line properly' ' + pristine_detach initial && + git config commit.cleanup scissors && + cat >expected <<-EOF && + Revert "picked" + + This reverts commit OBJID. + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # foo + EOF + + test_must_fail git revert picked && + + sed "s/$OID_REGEX/OBJID/" .git/MERGE_MSG >actual && + test_i18ncmp expected actual +' + +test_expect_success \ + 'revert conflict, ensure cleanup=scissors places scissors line properly' ' + pristine_detach initial && + git config --unset commit.cleanup && + cat >expected <<-EOF && + Revert "picked" + + This reverts commit OBJID. + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # foo + EOF + + test_must_fail git revert --cleanup=scissors picked && + + sed "s/$OID_REGEX/OBJID/" .git/MERGE_MSG >actual && + test_i18ncmp expected actual +' + test_expect_success 'failed cherry-pick does not forget -s' ' pristine_detach initial && test_must_fail git cherry-pick -s picked && @@ -345,7 +475,7 @@ test_expect_success 'commit after failed cherry-pick does not add duplicated -s' pristine_detach initial && test_must_fail git cherry-pick -s picked-signed && git commit -a -s && - test $(git show -s |grep -c "Signed-off-by") = 1 + test $(git show -s >tmp && grep -c "Signed-off-by" tmp && rm tmp) = 1 ' test_expect_success 'commit after failed cherry-pick adds -s at the right place' ' @@ -359,7 +489,7 @@ test_expect_success 'commit after failed cherry-pick adds -s at the right place' Signed-off-by: C O Mitter <committer@example.com> # Conflicts: EOF - grep -e "^# Conflicts:" -e '^Signed-off-by' <.git/COMMIT_EDITMSG >actual && + grep -e "^# Conflicts:" -e '^Signed-off-by' .git/COMMIT_EDITMSG >actual && test_cmp expect actual && cat <<-\EOF >expected && @@ -378,7 +508,7 @@ test_expect_success 'commit --amend -s places the sign-off at the right place' ' # emulate old-style conflicts block mv .git/MERGE_MSG .git/MERGE_MSG+ && - sed -e "/^# Conflicts:/,\$s/^# *//" <.git/MERGE_MSG+ >.git/MERGE_MSG && + sed -e "/^# Conflicts:/,\$s/^# *//" .git/MERGE_MSG+ >.git/MERGE_MSG && git commit -a && git commit --amend -s && @@ -388,7 +518,7 @@ test_expect_success 'commit --amend -s places the sign-off at the right place' ' Signed-off-by: C O Mitter <committer@example.com> Conflicts: EOF - grep -e "^Conflicts:" -e '^Signed-off-by' <.git/COMMIT_EDITMSG >actual && + grep -e "^Conflicts:" -e '^Signed-off-by' .git/COMMIT_EDITMSG >actual && test_cmp expect actual ' @@ -405,4 +535,23 @@ test_expect_success 'cherry-pick preserves sparse-checkout' ' test_i18ngrep ! "Changes not staged for commit:" actual ' +test_expect_success 'cherry-pick --continue remembers --keep-redundant-commits' ' + test_when_finished "git cherry-pick --abort || :" && + pristine_detach initial && + test_must_fail git cherry-pick --keep-redundant-commits picked redundant && + echo c >foo && + git add foo && + git cherry-pick --continue +' + +test_expect_success 'cherry-pick --continue remembers --allow-empty and --allow-empty-message' ' + test_when_finished "git cherry-pick --abort || :" && + pristine_detach initial && + test_must_fail git cherry-pick --allow-empty --allow-empty-message \ + picked empty && + echo c >foo && + git add foo && + git cherry-pick --continue +' + test_done diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index 941d5026da..793bcc7fe3 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -93,6 +93,128 @@ test_expect_success 'cherry-pick cleans up sequencer state upon success' ' test_path_is_missing .git/sequencer ' +test_expect_success 'cherry-pick --skip requires cherry-pick in progress' ' + pristine_detach initial && + test_must_fail git cherry-pick --skip +' + +test_expect_success 'revert --skip requires revert in progress' ' + pristine_detach initial && + test_must_fail git revert --skip +' + +test_expect_success 'cherry-pick --skip to skip commit' ' + pristine_detach initial && + test_must_fail git cherry-pick anotherpick && + test_must_fail git revert --skip && + git cherry-pick --skip && + test_cmp_rev initial HEAD && + test_path_is_missing .git/CHERRY_PICK_HEAD +' + +test_expect_success 'revert --skip to skip commit' ' + pristine_detach anotherpick && + test_must_fail git revert anotherpick~1 && + test_must_fail git cherry-pick --skip && + git revert --skip && + test_cmp_rev anotherpick HEAD +' + +test_expect_success 'skip "empty" commit' ' + pristine_detach picked && + test_commit dummy foo d && + test_must_fail git cherry-pick anotherpick && + git cherry-pick --skip && + test_cmp_rev dummy HEAD +' + +test_expect_success 'skip a commit and check if rest of sequence is correct' ' + pristine_detach initial && + echo e >expect && + cat >expect.log <<-EOF && + OBJID + :100644 100644 OBJID OBJID M foo + OBJID + :100644 100644 OBJID OBJID M foo + OBJID + :100644 100644 OBJID OBJID M unrelated + OBJID + :000000 100644 OBJID OBJID A foo + :000000 100644 OBJID OBJID A unrelated + EOF + test_must_fail git cherry-pick base..yetanotherpick && + test_must_fail git cherry-pick --skip && + echo d >foo && + git add foo && + git cherry-pick --continue && + { + git rev-list HEAD | + git diff-tree --root --stdin | + sed "s/$OID_REGEX/OBJID/g" + } >actual.log && + test_cmp expect foo && + test_cmp expect.log actual.log +' + +test_expect_success 'check advice when we move HEAD by committing' ' + pristine_detach initial && + cat >expect <<-EOF && + error: there is nothing to skip + hint: have you committed already? + hint: try "git cherry-pick --continue" + fatal: cherry-pick failed + EOF + test_must_fail git cherry-pick base..yetanotherpick && + echo c >foo && + git commit -a && + test_path_is_missing .git/CHERRY_PICK_HEAD && + test_must_fail git cherry-pick --skip 2>advice && + test_i18ncmp expect advice +' + +test_expect_success 'selectively advise --skip while launching another sequence' ' + pristine_detach initial && + cat >expect <<-EOF && + error: cherry-pick is already in progress + hint: try "git cherry-pick (--continue | --skip | --abort | --quit)" + fatal: cherry-pick failed + EOF + test_must_fail git cherry-pick picked..yetanotherpick && + test_must_fail git cherry-pick picked..yetanotherpick 2>advice && + test_i18ncmp expect advice && + cat >expect <<-EOF && + error: cherry-pick is already in progress + hint: try "git cherry-pick (--continue | --abort | --quit)" + fatal: cherry-pick failed + EOF + git reset --merge && + test_must_fail git cherry-pick picked..yetanotherpick 2>advice && + test_i18ncmp expect advice +' + +test_expect_success 'allow skipping commit but not abort for a new history' ' + pristine_detach initial && + cat >expect <<-EOF && + error: cannot abort from a branch yet to be born + fatal: cherry-pick failed + EOF + git checkout --orphan new_disconnected && + git reset --hard && + test_must_fail git cherry-pick anotherpick && + test_must_fail git cherry-pick --abort 2>advice && + git cherry-pick --skip && + test_i18ncmp expect advice +' + +test_expect_success 'allow skipping stopped cherry-pick because of untracked file modifications' ' + pristine_detach initial && + git rm --cached unrelated && + git commit -m "untrack unrelated" && + test_must_fail git cherry-pick initial base && + test_path_is_missing .git/CHERRY_PICK_HEAD && + git cherry-pick --skip +' + test_expect_success '--quit does not complain when no cherry-pick is in progress' ' pristine_detach initial && git cherry-pick --quit diff --git a/t/t3511-cherry-pick-x.sh b/t/t3511-cherry-pick-x.sh index 9888bf34b9..84a587daf3 100755 --- a/t/t3511-cherry-pick-x.sh +++ b/t/t3511-cherry-pick-x.sh @@ -298,4 +298,24 @@ test_expect_success 'cherry-pick preserves commit message' ' test_cmp expect actual ' +test_expect_success 'cherry-pick -x cleans commit message' ' + pristine_detach initial && + git cherry-pick -x mesg-unclean && + git log -1 --pretty=format:%B >actual && + printf "%s\n(cherry picked from commit %s)\n" \ + "$mesg_unclean" $(git rev-parse mesg-unclean) | + git stripspace >expect && + test_cmp expect actual +' + +test_expect_success 'cherry-pick -x respects commit.cleanup' ' + pristine_detach initial && + git -c commit.cleanup=strip cherry-pick -x mesg-unclean && + git log -1 --pretty=format:%B >actual && + printf "%s\n(cherry picked from commit %s)\n" \ + "$mesg_unclean" $(git rev-parse mesg-unclean) | + git stripspace -s >expect && + test_cmp expect actual +' + test_done diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index 04e5d42bd3..8c8cca5bfb 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -8,91 +8,92 @@ test_description='Test of the various options to git rm.' . ./test-lib.sh # Setup some files to be removed, some with funny characters -test_expect_success \ - 'Initialize test directory' \ - "touch -- foo bar baz 'space embedded' -q && - git add -- foo bar baz 'space embedded' -q && - git commit -m 'add normal files'" +test_expect_success 'Initialize test directory' ' + touch -- foo bar baz "space embedded" -q && + git add -- foo bar baz "space embedded" -q && + git commit -m "add normal files" +' -if test_have_prereq !FUNNYNAMES; then +if test_have_prereq !FUNNYNAMES +then say 'Your filesystem does not allow tabs in filenames.' fi -test_expect_success FUNNYNAMES 'add files with funny names' " - touch -- 'tab embedded' 'newline -embedded' && - git add -- 'tab embedded' 'newline -embedded' && - git commit -m 'add files with tabs and newlines' -" - -test_expect_success \ - 'Pre-check that foo exists and is in index before git rm foo' \ - '[ -f foo ] && git ls-files --error-unmatch foo' - -test_expect_success \ - 'Test that git rm foo succeeds' \ - 'git rm --cached foo' - -test_expect_success \ - 'Test that git rm --cached foo succeeds if the index matches the file' \ - 'echo content >foo && - git add foo && - git rm --cached foo' - -test_expect_success \ - 'Test that git rm --cached foo succeeds if the index matches the file' \ - 'echo content >foo && - git add foo && - git commit -m foo && - echo "other content" >foo && - git rm --cached foo' - -test_expect_success \ - 'Test that git rm --cached foo fails if the index matches neither the file nor HEAD' ' - echo content >foo && - git add foo && - git commit -m foo --allow-empty && - echo "other content" >foo && - git add foo && - echo "yet another content" >foo && - test_must_fail git rm --cached foo -' - -test_expect_success \ - 'Test that git rm --cached -f foo works in case where --cached only did not' \ - 'echo content >foo && - git add foo && - git commit -m foo --allow-empty && - echo "other content" >foo && - git add foo && - echo "yet another content" >foo && - git rm --cached -f foo' - -test_expect_success \ - 'Post-check that foo exists but is not in index after git rm foo' \ - '[ -f foo ] && test_must_fail git ls-files --error-unmatch foo' - -test_expect_success \ - 'Pre-check that bar exists and is in index before "git rm bar"' \ - '[ -f bar ] && git ls-files --error-unmatch bar' - -test_expect_success \ - 'Test that "git rm bar" succeeds' \ - 'git rm bar' - -test_expect_success \ - 'Post-check that bar does not exist and is not in index after "git rm -f bar"' \ - '! [ -f bar ] && test_must_fail git ls-files --error-unmatch bar' - -test_expect_success \ - 'Test that "git rm -- -q" succeeds (remove a file that looks like an option)' \ - 'git rm -- -q' - -test_expect_success FUNNYNAMES \ - "Test that \"git rm -f\" succeeds with embedded space, tab, or newline characters." \ - "git rm -f 'space embedded' 'tab embedded' 'newline -embedded'" +test_expect_success FUNNYNAMES 'add files with funny names' ' + touch -- "tab embedded" "newline${LF}embedded" && + git add -- "tab embedded" "newline${LF}embedded" && + git commit -m "add files with tabs and newlines" +' + +test_expect_success 'Pre-check that foo exists and is in index before git rm foo' ' + test_path_is_file foo && + git ls-files --error-unmatch foo +' + +test_expect_success 'Test that git rm foo succeeds' ' + git rm --cached foo +' + +test_expect_success 'Test that git rm --cached foo succeeds if the index matches the file' ' + echo content >foo && + git add foo && + git rm --cached foo +' + +test_expect_success 'Test that git rm --cached foo succeeds if the index matches the file' ' + echo content >foo && + git add foo && + git commit -m foo && + echo "other content" >foo && + git rm --cached foo +' + +test_expect_success 'Test that git rm --cached foo fails if the index matches neither the file nor HEAD' ' + echo content >foo && + git add foo && + git commit -m foo --allow-empty && + echo "other content" >foo && + git add foo && + echo "yet another content" >foo && + test_must_fail git rm --cached foo +' + +test_expect_success 'Test that git rm --cached -f foo works in case where --cached only did not' ' + echo content >foo && + git add foo && + git commit -m foo --allow-empty && + echo "other content" >foo && + git add foo && + echo "yet another content" >foo && + git rm --cached -f foo +' + +test_expect_success 'Post-check that foo exists but is not in index after git rm foo' ' + test_path_is_file foo && + test_must_fail git ls-files --error-unmatch foo +' + +test_expect_success 'Pre-check that bar exists and is in index before "git rm bar"' ' + test_path_is_file bar && + git ls-files --error-unmatch bar +' + +test_expect_success 'Test that "git rm bar" succeeds' ' + git rm bar +' + +test_expect_success 'Post-check that bar does not exist and is not in index after "git rm -f bar"' ' + test_path_is_missing bar && + test_must_fail git ls-files --error-unmatch bar +' + +test_expect_success 'Test that "git rm -- -q" succeeds (remove a file that looks like an option)' ' + git rm -- -q +' + +test_expect_success FUNNYNAMES 'Test that "git rm -f" succeeds with embedded space, tab, or newline characters.' ' + git rm -f "space embedded" "tab embedded" "newline${LF}embedded" +' test_expect_success SANITY 'Test that "git rm -f" fails if its rm fails' ' test_when_finished "chmod 775 ." && @@ -100,9 +101,9 @@ test_expect_success SANITY 'Test that "git rm -f" fails if its rm fails' ' test_must_fail git rm -f baz ' -test_expect_success \ - 'When the rm in "git rm -f" fails, it should not remove the file from the index' \ - 'git ls-files --error-unmatch baz' +test_expect_success 'When the rm in "git rm -f" fails, it should not remove the file from the index' ' + git ls-files --error-unmatch baz +' test_expect_success 'Remove nonexistent file with --ignore-unmatch' ' git rm --ignore-unmatch nonexistent @@ -137,15 +138,15 @@ test_expect_success 'Re-add foo and baz' ' test_expect_success 'Modify foo -- rm should refuse' ' echo >>foo && test_must_fail git rm foo baz && - test -f foo && - test -f baz && + test_path_is_file foo && + test_path_is_file baz && git ls-files --error-unmatch foo baz ' test_expect_success 'Modified foo -- rm -f should work' ' git rm -f foo baz && - test ! -f foo && - test ! -f baz && + test_path_is_missing foo && + test_path_is_missing baz && test_must_fail git ls-files --error-unmatch foo && test_must_fail git ls-files --error-unmatch bar ' @@ -159,15 +160,15 @@ test_expect_success 'Re-add foo and baz for HEAD tests' ' test_expect_success 'foo is different in index from HEAD -- rm should refuse' ' test_must_fail git rm foo baz && - test -f foo && - test -f baz && + test_path_is_file foo && + test_path_is_file baz && git ls-files --error-unmatch foo baz ' test_expect_success 'but with -f it should work.' ' git rm -f foo baz && - test ! -f foo && - test ! -f baz && + test_path_is_missing foo && + test_path_is_missing baz && test_must_fail git ls-files --error-unmatch foo && test_must_fail git ls-files --error-unmatch baz ' @@ -194,21 +195,21 @@ test_expect_success 'Recursive test setup' ' test_expect_success 'Recursive without -r fails' ' test_must_fail git rm frotz && - test -d frotz && - test -f frotz/nitfol + test_path_is_dir frotz && + test_path_is_file frotz/nitfol ' test_expect_success 'Recursive with -r but dirty' ' echo qfwfq >>frotz/nitfol && test_must_fail git rm -r frotz && - test -d frotz && - test -f frotz/nitfol + test_path_is_dir frotz && + test_path_is_file frotz/nitfol ' test_expect_success 'Recursive with -r -f' ' git rm -f -r frotz && - ! test -f frotz/nitfol && - ! test -d frotz + test_path_is_missing frotz/nitfol && + test_path_is_missing frotz ' test_expect_success 'Remove nonexistent file returns nonzero exit status' ' @@ -217,44 +218,61 @@ test_expect_success 'Remove nonexistent file returns nonzero exit status' ' test_expect_success 'Call "rm" from outside the work tree' ' mkdir repo && - (cd repo && - git init && - echo something >somefile && - git add somefile && - git commit -m "add a file" && - (cd .. && - git --git-dir=repo/.git --work-tree=repo rm somefile) && - test_must_fail git ls-files --error-unmatch somefile) + ( + cd repo && + git init && + echo something >somefile && + git add somefile && + git commit -m "add a file" && + ( + cd .. && + git --git-dir=repo/.git --work-tree=repo rm somefile + ) && + test_must_fail git ls-files --error-unmatch somefile + ) ' test_expect_success 'refresh index before checking if it is up-to-date' ' - git reset --hard && test-tool chmtime -86400 frotz/nitfol && git rm frotz/nitfol && - test ! -f frotz/nitfol - + test_path_is_missing frotz/nitfol ' test_expect_success 'choking "git rm" should not let it die with cruft' ' + test_oid_init && git reset -q --hard && test_when_finished "rm -f .git/index.lock && git reset -q --hard" && i=0 && + hash=$(test_oid deadbeef) && while test $i -lt 12000 do - echo "100644 1234567890123456789012345678901234567890 0 some-file-$i" - i=$(( $i + 1 )) + echo "100644 $hash 0 some-file-$i" + i=$(( $i + 1 )) done | git update-index --index-info && git rm -n "some-file-*" | : && test_path_is_missing .git/index.lock ' +test_expect_success 'Resolving by removal is not a warning-worthy event' ' + git reset -q --hard && + test_when_finished "rm -f .git/index.lock msg && git reset -q --hard" && + blob=$(echo blob | git hash-object -w --stdin) && + for stage in 1 2 3 + do + echo "100644 $blob $stage blob" + done | git update-index --index-info && + git rm blob >msg 2>&1 && + test_i18ngrep ! "needs merge" msg && + test_must_fail git ls-files -s --error-unmatch blob +' + test_expect_success 'rm removes subdirectories recursively' ' mkdir -p dir/subdir/subsubdir && echo content >dir/subdir/subsubdir/file && git add dir/subdir/subsubdir/file && git rm -f dir/subdir/subsubdir/file && - ! test -d dir + test_path_is_missing dir ' cat >expect <<EOF @@ -292,7 +310,7 @@ test_expect_success 'rm removes empty submodules from work tree' ' git add .gitmodules && git commit -m "add submodule" && git rm submod && - test ! -e submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -314,7 +332,7 @@ test_expect_success 'rm removes work tree of unmodified submodules' ' git reset --hard && git submodule update && git rm submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -325,7 +343,7 @@ test_expect_success 'rm removes a submodule with a trailing /' ' git reset --hard && git submodule update && git rm submod/ && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -343,12 +361,12 @@ test_expect_success 'rm of a populated submodule with different HEAD fails unles git submodule update && git -C submod checkout HEAD^ && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -359,8 +377,8 @@ test_expect_success 'rm --cached leaves work tree of populated submodules and .g git reset --hard && git submodule update && git rm --cached submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno >actual && test_cmp expect.cached actual && git config -f .gitmodules submodule.sub.url && @@ -371,7 +389,7 @@ test_expect_success 'rm --dry-run does not touch the submodule or .gitmodules' ' git reset --hard && git submodule update && git rm -n submod && - test -f submod/.git && + test_path_is_file submod/.git && git diff-index --exit-code HEAD ' @@ -381,8 +399,8 @@ test_expect_success 'rm does not complain when no .gitmodules file is found' ' git rm .gitmodules && git rm submod >actual 2>actual.err && test_must_be_empty actual.err && - ! test -d submod && - ! test -f submod/.git && + test_path_is_missing submod && + test_path_is_missing submod/.git && git status -s -uno >actual && test_cmp expect.both_deleted actual ' @@ -392,15 +410,15 @@ test_expect_success 'rm will error out on a modified .gitmodules file unless sta git submodule update && git config -f .gitmodules foo.bar true && test_must_fail git rm submod >actual 2>actual.err && - test -s actual.err && - test -d submod && - test -f submod/.git && + test_file_not_empty actual.err && + test_path_is_dir submod && + test_path_is_file submod/.git && git diff-files --quiet -- submod && git add .gitmodules && git rm submod >actual 2>actual.err && test_must_be_empty actual.err && - ! test -d submod && - ! test -f submod/.git && + test_path_is_missing submod && + test_path_is_missing submod/.git && git status -s -uno >actual && test_cmp expect actual ' @@ -413,8 +431,8 @@ test_expect_success 'rm issues a warning when section is not found in .gitmodule echo "warning: Could not find section in .gitmodules where path=submod" >expect.err && git rm submod >actual 2>actual.err && test_i18ncmp expect.err actual.err && - ! test -d submod && - ! test -f submod/.git && + test_path_is_missing submod && + test_path_is_missing submod/.git && git status -s -uno >actual && test_cmp expect actual ' @@ -424,12 +442,12 @@ test_expect_success 'rm of a populated submodule with modifications fails unless git submodule update && echo X >submod/empty && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_inside actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -439,12 +457,12 @@ test_expect_success 'rm of a populated submodule with untracked files fails unle git submodule update && echo X >submod/untracked && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_untracked actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -481,7 +499,7 @@ test_expect_success 'rm removes work tree of unmodified conflicted submodule' ' git submodule update && test_must_fail git merge conflict2 && git rm submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -493,12 +511,12 @@ test_expect_success 'rm of a conflicted populated submodule with different HEAD git -C submod checkout HEAD^ && test_must_fail git merge conflict2 && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -512,12 +530,12 @@ test_expect_success 'rm of a conflicted populated submodule with modifications f echo X >submod/empty && test_must_fail git merge conflict2 && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -531,12 +549,12 @@ test_expect_success 'rm of a conflicted populated submodule with untracked files echo X >submod/untracked && test_must_fail git merge conflict2 && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -545,20 +563,21 @@ test_expect_success 'rm of a conflicted populated submodule with a .git director git checkout conflict1 && git reset --hard && git submodule update && - (cd submod && + ( + cd submod && rm .git && cp -R ../.git/modules/sub .git && GIT_WORK_TREE=. git config --unset core.worktree ) && test_must_fail git merge conflict2 && test_must_fail git rm submod && - test -d submod && - test -d submod/.git && + test_path_is_dir submod && + test_path_is_dir submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && test_must_fail git rm -f submod && - test -d submod && - test -d submod/.git && + test_path_is_dir submod && + test_path_is_dir submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git merge --abort && @@ -570,7 +589,7 @@ test_expect_success 'rm of a conflicted unpopulated submodule succeeds' ' git reset --hard && test_must_fail git merge conflict2 && git rm submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -579,17 +598,18 @@ test_expect_success 'rm of a populated submodule with a .git directory migrates git checkout -f master && git reset --hard && git submodule update && - (cd submod && + ( + cd submod && rm .git && cp -R ../.git/modules/sub .git && GIT_WORK_TREE=. git config --unset core.worktree && rm -r ../.git/modules/sub ) && git rm submod 2>output.err && - ! test -d submod && - ! test -d submod/.git && + test_path_is_missing submod && + test_path_is_missing submod/.git && git status -s -uno --ignore-submodules=none >actual && - test -s actual && + test_file_not_empty actual && test_i18ngrep Migrating output.err ' @@ -600,7 +620,8 @@ EOF test_expect_success 'setup subsubmodule' ' git reset --hard && git submodule update && - (cd submod && + ( + cd submod && git update-index --add --cacheinfo 160000 $(git rev-parse HEAD) subsubmod && git config -f .gitmodules submodule.sub.url ../. && git config -f .gitmodules submodule.sub.path subsubmod && @@ -614,7 +635,7 @@ test_expect_success 'setup subsubmodule' ' test_expect_success 'rm recursively removes work tree of unmodified submodules' ' git rm submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -624,12 +645,12 @@ test_expect_success 'rm of a populated nested submodule with different nested HE git submodule update --recursive && git -C submod/subsubmod checkout HEAD^ && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_inside actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -639,12 +660,12 @@ test_expect_success 'rm of a populated nested submodule with nested modification git submodule update --recursive && echo X >submod/subsubmod/empty && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_inside actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -654,12 +675,12 @@ test_expect_success 'rm of a populated nested submodule with nested untracked fi git submodule update --recursive && echo X >submod/subsubmod/untracked && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_untracked actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -667,16 +688,17 @@ test_expect_success 'rm of a populated nested submodule with nested untracked fi test_expect_success "rm absorbs submodule's nested .git directory" ' git reset --hard && git submodule update --recursive && - (cd submod/subsubmod && + ( + cd submod/subsubmod && rm .git && mv ../../.git/modules/sub/modules/sub .git && GIT_WORK_TREE=. git config --unset core.worktree ) && git rm submod 2>output.err && - ! test -d submod && - ! test -d submod/subsubmod/.git && + test_path_is_missing submod && + test_path_is_missing submod/subsubmod/.git && git status -s -uno --ignore-submodules=none >actual && - test -s actual && + test_file_not_empty actual && test_i18ngrep Migrating output.err ' diff --git a/t/t3700-add.sh b/t/t3700-add.sh index be582a513b..c325167b90 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -296,6 +296,17 @@ test_expect_success '"git add ." in empty repo' ' ) ' +test_expect_success 'error on a repository with no commits' ' + rm -fr empty && + git init empty && + test_must_fail git add empty >actual 2>&1 && + cat >expect <<-EOF && + error: '"'empty/'"' does not have a commit checked out + fatal: adding files failed + EOF + test_i18ncmp expect actual +' + test_expect_success 'git add --dry-run of existing changed file' " echo new >>track-this && git add --dry-run track-this >actual 2>&1 && @@ -396,6 +407,7 @@ test_expect_success 'no file status change if no pathspec is given in subdir' ' ' test_expect_success 'all statuses changed in folder if . is given' ' + rm -fr empty && git add --chmod=+x . && test $(git ls-files --stage | grep ^100644 | wc -l) -eq 0 && git add --chmod=-x . && diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index 65dfbc033a..69991a3168 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -639,4 +639,12 @@ test_expect_success 'add -p patch editing works with pathological context lines' test_cmp expected-2 actual ' +test_expect_success 'checkout -p works with pathological context lines' ' + test_write_lines a a a a a a >a && + git add a && + test_write_lines a b a b a b a b a b a > a&& + test_write_lines s n n y q | git checkout -p && + test_write_lines a b a b a a b a b a >expect && + test_cmp expect a +' test_done diff --git a/t/t3800-mktag.sh b/t/t3800-mktag.sh index 8eb47942e2..64dcc5ec28 100755 --- a/t/t3800-mktag.sh +++ b/t/t3800-mktag.sh @@ -23,6 +23,7 @@ check_verify_failure () { # first create a commit, so we have a valid object/type # for the tag. test_expect_success 'setup' ' + test_oid_init && echo Hello >A && git update-index --add A && git commit -m "Initial commit" && @@ -69,28 +70,28 @@ check_verify_failure '"object" line SHA1 check' '^error: char7: .*SHA1 hash$' # 4. type line label check cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $head xxxx tag tag mytag tagger . <> 0 +0000 EOF -check_verify_failure '"type" line label check' '^error: char47: .*"\\ntype "$' +check_verify_failure '"type" line label check' '^error: char.*: .*"\\ntype "$' ############################################################ # 5. type line eol check -echo "object 779e9b33986b1c2670fff52c5067603117b3e895" >tag.sig +echo "object $head" >tag.sig printf "type tagsssssssssssssssssssssssssssssss" >>tag.sig -check_verify_failure '"type" line eol check' '^error: char48: .*"\\n"$' +check_verify_failure '"type" line eol check' '^error: char.*: .*"\\n"$' ############################################################ # 6. tag line label check #1 cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $head type tag xxx mytag tagger . <> 0 +0000 @@ -98,37 +99,37 @@ tagger . <> 0 +0000 EOF check_verify_failure '"tag" line label check #1' \ - '^error: char57: no "tag " found$' + '^error: char.*: no "tag " found$' ############################################################ # 7. tag line label check #2 cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $head type taggggggggggggggggggggggggggggggg tag EOF check_verify_failure '"tag" line label check #2' \ - '^error: char87: no "tag " found$' + '^error: char.*: no "tag " found$' ############################################################ # 8. type line type-name length check cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $head type taggggggggggggggggggggggggggggggg tag mytag EOF check_verify_failure '"type" line type-name length check' \ - '^error: char53: type too long$' + '^error: char.*: type too long$' ############################################################ # 9. verify object (SHA1/type) check cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $(test_oid deadbeef) type tagggg tag mytag tagger . <> 0 +0000 @@ -150,7 +151,7 @@ tagger . <> 0 +0000 EOF check_verify_failure 'verify tag-name check' \ - '^error: char67: could not verify tag name$' + '^error: char.*: could not verify tag name$' ############################################################ # 11. tagger line label check #1 @@ -164,7 +165,7 @@ This is filler EOF check_verify_failure '"tagger" line label check #1' \ - '^error: char70: could not find "tagger "$' + '^error: char.*: could not find "tagger "$' ############################################################ # 12. tagger line label check #2 @@ -179,7 +180,7 @@ This is filler EOF check_verify_failure '"tagger" line label check #2' \ - '^error: char70: could not find "tagger "$' + '^error: char.*: could not find "tagger "$' ############################################################ # 13. disallow missing tag author name @@ -194,7 +195,7 @@ This is filler EOF check_verify_failure 'disallow missing tag author name' \ - '^error: char77: missing tagger name$' + '^error: char.*: missing tagger name$' ############################################################ # 14. disallow missing tag author name @@ -209,7 +210,7 @@ tagger T A Gger < EOF check_verify_failure 'disallow malformed tagger' \ - '^error: char77: malformed tagger field$' + '^error: char.*: malformed tagger field$' ############################################################ # 15. allow empty tag email @@ -238,7 +239,7 @@ tagger T A Gger <tag ger@example.com> 0 +0000 EOF check_verify_failure 'disallow spaces in tag email' \ - '^error: char77: malformed tagger field$' + '^error: char.*: malformed tagger field$' ############################################################ # 17. disallow missing tag timestamp @@ -252,7 +253,7 @@ tagger T A Gger <tagger@example.com>__ EOF check_verify_failure 'disallow missing tag timestamp' \ - '^error: char107: missing tag timestamp$' + '^error: char.*: missing tag timestamp$' ############################################################ # 18. detect invalid tag timestamp1 @@ -266,7 +267,7 @@ tagger T A Gger <tagger@example.com> Tue Mar 25 15:47:44 2008 EOF check_verify_failure 'detect invalid tag timestamp1' \ - '^error: char107: missing tag timestamp$' + '^error: char.*: missing tag timestamp$' ############################################################ # 19. detect invalid tag timestamp2 @@ -280,7 +281,7 @@ tagger T A Gger <tagger@example.com> 2008-03-31T12:20:15-0500 EOF check_verify_failure 'detect invalid tag timestamp2' \ - '^error: char111: malformed tag timestamp$' + '^error: char.*: malformed tag timestamp$' ############################################################ # 20. detect invalid tag timezone1 @@ -294,7 +295,7 @@ tagger T A Gger <tagger@example.com> 1206478233 GMT EOF check_verify_failure 'detect invalid tag timezone1' \ - '^error: char118: malformed tag timezone$' + '^error: char.*: malformed tag timezone$' ############################################################ # 21. detect invalid tag timezone2 @@ -308,7 +309,7 @@ tagger T A Gger <tagger@example.com> 1206478233 + 30 EOF check_verify_failure 'detect invalid tag timezone2' \ - '^error: char118: malformed tag timezone$' + '^error: char.*: malformed tag timezone$' ############################################################ # 22. detect invalid tag timezone3 @@ -322,7 +323,7 @@ tagger T A Gger <tagger@example.com> 1206478233 -1430 EOF check_verify_failure 'detect invalid tag timezone3' \ - '^error: char118: malformed tag timezone$' + '^error: char.*: malformed tag timezone$' ############################################################ # 23. detect invalid header entry @@ -337,7 +338,7 @@ this line should not be here EOF check_verify_failure 'detect invalid header entry' \ - '^error: char124: trailing garbage in tag header$' + '^error: char.*: trailing garbage in tag header$' ############################################################ # 24. create valid tag diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 5f8272b6f9..580bfbdc23 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -7,23 +7,35 @@ test_description='Test git stash' . ./test-lib.sh +diff_cmp () { + for i in "$1" "$2" + do + sed -e 's/^index 0000000\.\.[0-9a-f]*/index 0000000..1234567/' \ + -e 's/^index [0-9a-f]*\.\.[0-9a-f]*/index 1234567..89abcde/' \ + -e 's/^index [0-9a-f]*,[0-9a-f]*\.\.[0-9a-f]*/index 1234567,7654321..89abcde/' \ + "$i" >"$i.compare" || return 1 + done && + test_cmp "$1.compare" "$2.compare" && + rm -f "$1.compare" "$2.compare" +} + test_expect_success 'stash some dirty working directory' ' - echo 1 > file && + echo 1 >file && git add file && echo unrelated >other-file && git add other-file && test_tick && git commit -m initial && - echo 2 > file && + echo 2 >file && git add file && - echo 3 > file && + echo 3 >file && test_tick && git stash && git diff-files --quiet && git diff-index --cached --quiet HEAD ' -cat > expect << EOF +cat >expect <<EOF diff --git a/file b/file index 0cfbf08..00750ed 100644 --- a/file @@ -35,8 +47,8 @@ EOF test_expect_success 'parents of stash' ' test $(git rev-parse stash^) = $(git rev-parse HEAD) && - git diff stash^2..stash > output && - test_cmp expect output + git diff stash^2..stash >output && + diff_cmp expect output ' test_expect_success 'applying bogus stash does nothing' ' @@ -74,7 +86,7 @@ test_expect_success 'apply stashed changes' ' test_expect_success 'apply stashed changes (including index)' ' git reset --hard HEAD^ && - echo 6 > other-file && + echo 6 >other-file && git add other-file && test_tick && git commit -m other-file && @@ -99,12 +111,12 @@ test_expect_success 'stash drop complains of extra options' ' test_expect_success 'drop top stash' ' git reset --hard && - git stash list > stashlist1 && - echo 7 > file && + git stash list >expected && + echo 7 >file && git stash && git stash drop && - git stash list > stashlist2 && - test_cmp stashlist1 stashlist2 && + git stash list >actual && + test_cmp expected actual && git stash apply && test 3 = $(cat file) && test 1 = $(git show :file) && @@ -113,9 +125,9 @@ test_expect_success 'drop top stash' ' test_expect_success 'drop middle stash' ' git reset --hard && - echo 8 > file && + echo 8 >file && git stash && - echo 9 > file && + echo 9 >file && git stash && git stash drop stash@{1} && test 2 = $(git stash list | wc -l) && @@ -160,7 +172,7 @@ test_expect_success 'stash pop' ' test 0 = $(git stash list | wc -l) ' -cat > expect << EOF +cat >expect <<EOF diff --git a/file2 b/file2 new file mode 100644 index 0000000..1fe912c @@ -170,7 +182,7 @@ index 0000000..1fe912c +bar2 EOF -cat > expect1 << EOF +cat >expect1 <<EOF diff --git a/file b/file index 257cc56..5716ca5 100644 --- a/file @@ -180,7 +192,7 @@ index 257cc56..5716ca5 100644 +bar EOF -cat > expect2 << EOF +cat >expect2 <<EOF diff --git a/file b/file index 7601807..5716ca5 100644 --- a/file @@ -198,79 +210,79 @@ index 0000000..1fe912c EOF test_expect_success 'stash branch' ' - echo foo > file && + echo foo >file && git commit file -m first && - echo bar > file && - echo bar2 > file2 && + echo bar >file && + echo bar2 >file2 && git add file2 && git stash && - echo baz > file && + echo baz >file && git commit file -m second && git stash branch stashbranch && test refs/heads/stashbranch = $(git symbolic-ref HEAD) && test $(git rev-parse HEAD) = $(git rev-parse master^) && - git diff --cached > output && - test_cmp expect output && - git diff > output && - test_cmp expect1 output && + git diff --cached >output && + diff_cmp expect output && + git diff >output && + diff_cmp expect1 output && git add file && git commit -m alternate\ second && - git diff master..stashbranch > output && - test_cmp output expect2 && + git diff master..stashbranch >output && + diff_cmp output expect2 && test 0 = $(git stash list | wc -l) ' test_expect_success 'apply -q is quiet' ' - echo foo > file && + echo foo >file && git stash && - git stash apply -q > output.out 2>&1 && + git stash apply -q >output.out 2>&1 && test_must_be_empty output.out ' test_expect_success 'save -q is quiet' ' - git stash save --quiet > output.out 2>&1 && + git stash save --quiet >output.out 2>&1 && test_must_be_empty output.out ' test_expect_success 'pop -q is quiet' ' - git stash pop -q > output.out 2>&1 && + git stash pop -q >output.out 2>&1 && test_must_be_empty output.out ' test_expect_success 'pop -q --index works and is quiet' ' - echo foo > file && + echo foo >file && git add file && git stash save --quiet && - git stash pop -q --index > output.out 2>&1 && + git stash pop -q --index >output.out 2>&1 && test foo = "$(git show :file)" && test_must_be_empty output.out ' test_expect_success 'drop -q is quiet' ' git stash && - git stash drop -q > output.out 2>&1 && + git stash drop -q >output.out 2>&1 && test_must_be_empty output.out ' test_expect_success 'stash -k' ' - echo bar3 > file && - echo bar4 > file2 && + echo bar3 >file && + echo bar4 >file2 && git add file2 && git stash -k && test bar,bar4 = $(cat file),$(cat file2) ' test_expect_success 'stash --no-keep-index' ' - echo bar33 > file && - echo bar44 > file2 && + echo bar33 >file && + echo bar44 >file2 && git add file2 && git stash --no-keep-index && test bar,bar2 = $(cat file),$(cat file2) ' test_expect_success 'stash --invalid-option' ' - echo bar5 > file && - echo bar6 > file2 && + echo bar5 >file && + echo bar6 >file2 && git add file2 && test_must_fail git stash --invalid-option && test_must_fail git stash save --invalid-option && @@ -287,6 +299,14 @@ test_expect_success 'stash an added file' ' test new = "$(cat file3)" ' +test_expect_success 'stash --intent-to-add file' ' + git reset --hard && + echo new >file4 && + git add --intent-to-add file4 && + test_when_finished "git rm -f file4" && + test_must_fail git stash +' + test_expect_success 'stash rm then recreate' ' git reset --hard && git rm file && @@ -444,6 +464,36 @@ test_expect_failure 'stash file to directory' ' test foo = "$(cat file/file)" ' +test_expect_success 'giving too many ref arguments does not modify files' ' + git stash clear && + test_when_finished "git reset --hard HEAD" && + echo foo >file2 && + git stash && + echo bar >file2 && + git stash && + test-tool chmtime =123456789 file2 && + for type in apply pop "branch stash-branch" + do + test_must_fail git stash $type stash@{0} stash@{1} 2>err && + test_i18ngrep "Too many revisions" err && + test 123456789 = $(test-tool chmtime -g file2) || return 1 + done +' + +test_expect_success 'drop: too many arguments errors out (does nothing)' ' + git stash list >expect && + test_must_fail git stash drop stash@{0} stash@{1} 2>err && + test_i18ngrep "Too many revisions" err && + git stash list >actual && + test_cmp expect actual +' + +test_expect_success 'show: too many arguments errors out (does nothing)' ' + test_must_fail git stash show stash@{0} stash@{1} 2>err 1>out && + test_i18ngrep "Too many revisions" err && + test_must_be_empty out +' + test_expect_success 'stash create - no changes' ' git stash clear && test_when_finished "git reset --hard HEAD" && @@ -456,11 +506,12 @@ test_expect_success 'stash branch - no stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && STASH_ID=$(git stash create) && git reset --hard && git stash branch stash-branch ${STASH_ID} && - test_when_finished "git reset --hard HEAD && git checkout master && git branch -D stash-branch" && + test_when_finished "git reset --hard HEAD && git checkout master && + git branch -D stash-branch" && test $(git ls-files --modified | wc -l) -eq 1 ' @@ -468,25 +519,31 @@ test_expect_success 'stash branch - stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && git stash && test_when_finished "git stash drop" && - echo bar >> file && + echo bar >>file && STASH_ID=$(git stash create) && git reset --hard && git stash branch stash-branch ${STASH_ID} && - test_when_finished "git reset --hard HEAD && git checkout master && git branch -D stash-branch" && + test_when_finished "git reset --hard HEAD && git checkout master && + git branch -D stash-branch" && test $(git ls-files --modified | wc -l) -eq 1 ' +test_expect_success 'stash branch complains with no arguments' ' + test_must_fail git stash branch 2>err && + test_i18ngrep "No branch name specified" err +' + test_expect_success 'stash show format defaults to --stat' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && git stash && test_when_finished "git stash drop" && - echo bar >> file && + echo bar >>file && STASH_ID=$(git stash create) && git reset --hard && cat >expected <<-EOF && @@ -501,10 +558,10 @@ test_expect_success 'stash show - stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && git stash && test_when_finished "git stash drop" && - echo bar >> file && + echo bar >>file && STASH_ID=$(git stash create) && git reset --hard && echo "1 0 file" >expected && @@ -516,10 +573,10 @@ test_expect_success 'stash show -p - stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && git stash && test_when_finished "git stash drop" && - echo bar >> file && + echo bar >>file && STASH_ID=$(git stash create) && git reset --hard && cat >expected <<-EOF && @@ -532,14 +589,14 @@ test_expect_success 'stash show -p - stashes on stack, stash-like argument' ' +bar EOF git stash show -p ${STASH_ID} >actual && - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'stash show - no stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && STASH_ID=$(git stash create) && git reset --hard && echo "1 0 file" >expected && @@ -551,7 +608,7 @@ test_expect_success 'stash show -p - no stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && STASH_ID=$(git stash create) && git reset --hard && cat >expected <<-EOF && @@ -564,16 +621,34 @@ test_expect_success 'stash show -p - no stashes on stack, stash-like argument' ' +foo EOF git stash show -p ${STASH_ID} >actual && - test_cmp expected actual + diff_cmp expected actual +' + +test_expect_success 'stash show --patience shows diff' ' + git reset --hard && + echo foo >>file && + STASH_ID=$(git stash create) && + git reset --hard && + cat >expected <<-EOF && + diff --git a/file b/file + index 7601807..71b52c4 100644 + --- a/file + +++ b/file + @@ -1 +1,2 @@ + baz + +foo + EOF + git stash show --patience ${STASH_ID} >actual && + diff_cmp expected actual ' -test_expect_success 'stash drop - fail early if specified stash is not a stash reference' ' +test_expect_success 'drop: fail early if specified stash is not a stash ref' ' git stash clear && test_when_finished "git reset --hard HEAD && git stash clear" && git reset --hard && - echo foo > file && + echo foo >file && git stash && - echo bar > file && + echo bar >file && git stash && test_must_fail git stash drop $(git rev-parse stash@{0}) && git stash pop && @@ -581,13 +656,13 @@ test_expect_success 'stash drop - fail early if specified stash is not a stash r git reset --hard HEAD ' -test_expect_success 'stash pop - fail early if specified stash is not a stash reference' ' +test_expect_success 'pop: fail early if specified stash is not a stash ref' ' git stash clear && test_when_finished "git reset --hard HEAD && git stash clear" && git reset --hard && - echo foo > file && + echo foo >file && git stash && - echo bar > file && + echo bar >file && git stash && test_must_fail git stash pop $(git rev-parse stash@{0}) && git stash pop && @@ -597,8 +672,8 @@ test_expect_success 'stash pop - fail early if specified stash is not a stash re test_expect_success 'ref with non-existent reflog' ' git stash clear && - echo bar5 > file && - echo bar6 > file2 && + echo bar5 >file && + echo bar6 >file2 && git add file2 && git stash && test_must_fail git rev-parse --quiet --verify does-not-exist && @@ -618,8 +693,8 @@ test_expect_success 'ref with non-existent reflog' ' test_expect_success 'invalid ref of the form stash@{n}, n >= N' ' git stash clear && test_must_fail git stash drop stash@{0} && - echo bar5 > file && - echo bar6 > file2 && + echo bar5 >file && + echo bar6 >file2 && git add file2 && git stash && test_must_fail git stash drop stash@{1} && @@ -645,7 +720,25 @@ test_expect_success 'invalid ref of the form "n", n >= N' ' git stash drop ' -test_expect_success 'stash branch should not drop the stash if the branch exists' ' +test_expect_success 'valid ref of the form "n", n < N' ' + git stash clear && + echo bar5 >file && + echo bar6 >file2 && + git add file2 && + git stash && + git stash show 0 && + git stash branch tmp 0 && + git checkout master && + git stash && + git stash apply 0 && + git reset --hard && + git stash pop 0 && + git stash && + git stash drop 0 && + test_must_fail git stash drop +' + +test_expect_success 'branch: do not drop the stash if the branch exists' ' git stash clear && echo foo >file && git add file && @@ -656,7 +749,7 @@ test_expect_success 'stash branch should not drop the stash if the branch exists git rev-parse stash@{0} -- ' -test_expect_success 'stash branch should not drop the stash if the apply fails' ' +test_expect_success 'branch: should not drop the stash if the apply fails' ' git stash clear && git reset HEAD~1 --hard && echo foo >file && @@ -670,7 +763,7 @@ test_expect_success 'stash branch should not drop the stash if the apply fails' git rev-parse stash@{0} -- ' -test_expect_success 'stash apply shows status same as git status (relative to current directory)' ' +test_expect_success 'apply: show same status as git status (relative to ./)' ' git stash clear && echo 1 >subdir/subfile1 && echo 2 >subdir/subfile2 && @@ -689,7 +782,7 @@ test_expect_success 'stash apply shows status same as git status (relative to cu test_i18ncmp expect actual ' -cat > expect << EOF +cat >expect <<EOF diff --git a/HEAD b/HEAD new file mode 100644 index 0000000..fe0cbee @@ -702,15 +795,15 @@ EOF test_expect_success 'stash where working directory contains "HEAD" file' ' git stash clear && git reset --hard && - echo file-not-a-ref > HEAD && + echo file-not-a-ref >HEAD && git add HEAD && test_tick && git stash && git diff-files --quiet && git diff-index --cached --quiet HEAD && test "$(git rev-parse stash^)" = "$(git rev-parse HEAD)" && - git diff stash^..stash > output && - test_cmp expect output + git diff stash^..stash >output && + diff_cmp expect output ' test_expect_success 'store called with invalid commit' ' @@ -766,7 +859,7 @@ test_expect_success 'stash list implies --first-parent -m' ' +working EOF git stash list --format=%gd -p >actual && - test_cmp expect actual + diff_cmp expect actual ' test_expect_success 'stash list --cc shows combined diff' ' @@ -783,7 +876,7 @@ test_expect_success 'stash list --cc shows combined diff' ' ++working EOF git stash list --format=%gd -p --cc >actual && - test_cmp expect actual + diff_cmp expect actual ' test_expect_success 'stash is not confused by partial renames' ' @@ -1011,7 +1104,7 @@ test_expect_success 'stash push -p with pathspec shows no changes only once' ' test_i18ncmp expect actual ' -test_expect_success 'stash push with pathspec shows no changes when there are none' ' +test_expect_success 'push <pathspec>: show no changes when there are none' ' >foo && git add foo && git commit -m "tmp" && @@ -1021,12 +1114,35 @@ test_expect_success 'stash push with pathspec shows no changes when there are no test_i18ncmp expect actual ' -test_expect_success 'stash push with pathspec not in the repository errors out' ' +test_expect_success 'push: <pathspec> not in the repository errors out' ' >untracked && test_must_fail git stash push untracked && test_path_is_file untracked ' +test_expect_success 'push: -q is quiet with changes' ' + >foo && + git add foo && + git stash push -q >output 2>&1 && + test_must_be_empty output +' + +test_expect_success 'push: -q is quiet with no changes' ' + git stash push -q >output 2>&1 && + test_must_be_empty output +' + +test_expect_success 'push: -q is quiet even if there is no initial commit' ' + git init foo_dir && + test_when_finished rm -rf foo_dir && + ( + cd foo_dir && + >bar && + test_must_fail git stash push -q >output 2>&1 && + test_must_be_empty output + ) +' + test_expect_success 'untracked files are left in place when -u is not given' ' >file && git add file && @@ -1096,6 +1212,12 @@ test_expect_success 'stash -- <subdir> works with binary files' ' test_path_is_file subdir/untracked ' +test_expect_success 'stash with user.name and user.email set works' ' + test_config user.name "A U Thor" && + test_config user.email "a.u@thor" && + git stash +' + test_expect_success 'stash works when user.name and user.email are not set' ' git reset && >1 && @@ -1124,4 +1246,27 @@ test_expect_success 'stash works when user.name and user.email are not set' ' ) ' +test_expect_success 'stash --keep-index with file deleted in index does not resurrect it on disk' ' + test_commit to-remove to-remove && + git rm to-remove && + git stash --keep-index && + test_path_is_missing to-remove +' + +test_expect_success 'stash apply should succeed with unmodified file' ' + echo base >file && + git add file && + git commit -m base && + + # now stash a modification + echo modified >file && + git stash && + + # make the file stat dirty + cp file other && + mv other file && + + git stash apply +' + test_done diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index cc1c8a7bb2..29ca76f2fb 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -283,4 +283,10 @@ test_expect_success 'stash -u -- <non-existant> shows no changes when there are test_i18ncmp expect actual ' +test_expect_success 'stash -u with globs' ' + >untracked.txt && + git stash -u -- ":(glob)**/*.txt" && + test_path_is_missing untracked.txt +' + test_done diff --git a/t/t3907-stash-show-config.sh b/t/t3907-stash-show-config.sh new file mode 100755 index 0000000000..10914bba7b --- /dev/null +++ b/t/t3907-stash-show-config.sh @@ -0,0 +1,83 @@ +#!/bin/sh + +test_description='Test git stash show configuration.' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit file +' + +# takes three parameters: +# 1. the stash.showStat value (or "<unset>") +# 2. the stash.showPatch value (or "<unset>") +# 3. the diff options of the expected output (or nothing for no output) +test_stat_and_patch () { + if test "<unset>" = "$1" + then + test_unconfig stash.showStat + else + test_config stash.showStat "$1" + fi && + + if test "<unset>" = "$2" + then + test_unconfig stash.showPatch + else + test_config stash.showPatch "$2" + fi && + + shift 2 && + echo 2 >file.t && + if test $# != 0 + then + git diff "$@" >expect + fi && + git stash && + git stash show >actual && + + if test $# = 0 + then + test_must_be_empty actual + else + test_cmp expect actual + fi +} + +test_expect_success 'showStat unset showPatch unset' ' + test_stat_and_patch "<unset>" "<unset>" --stat +' + +test_expect_success 'showStat unset showPatch false' ' + test_stat_and_patch "<unset>" false --stat +' + +test_expect_success 'showStat unset showPatch true' ' + test_stat_and_patch "<unset>" true --stat -p +' + +test_expect_success 'showStat false showPatch unset' ' + test_stat_and_patch false "<unset>" +' + +test_expect_success 'showStat false showPatch false' ' + test_stat_and_patch false false +' + +test_expect_success 'showStat false showPatch true' ' + test_stat_and_patch false true -p +' + +test_expect_success 'showStat true showPatch unset' ' + test_stat_and_patch true "<unset>" --stat +' + +test_expect_success 'showStat true showPatch false' ' + test_stat_and_patch true false --stat +' + +test_expect_success 'showStat true showPatch true' ' + test_stat_and_patch true true --stat -p +' + +test_done diff --git a/t/t4000-diff-format.sh b/t/t4000-diff-format.sh index 8de36b7d12..e5116a76a1 100755 --- a/t/t4000-diff-format.sh +++ b/t/t4000-diff-format.sh @@ -78,7 +78,7 @@ test_expect_success 'git diff-files --no-patch --patch shows the patch' ' test_expect_success 'git diff-files --no-patch --patch-with-raw shows the patch and raw data' ' git diff-files --no-patch --patch-with-raw >actual && - grep -q "^:100644 100755 .* 0000000000000000000000000000000000000000 M path0\$" actual && + grep -q "^:100644 100755 .* $ZERO_OID M path0\$" actual && tail -n +4 actual >actual-patch && compare_diff_patch expected actual-patch ' diff --git a/t/t4002-diff-basic.sh b/t/t4002-diff-basic.sh index 3a6c21e825..cbcdd10464 100755 --- a/t/t4002-diff-basic.sh +++ b/t/t4002-diff-basic.sh @@ -7,123 +7,272 @@ test_description='Test diff raw-output. ' . ./test-lib.sh + . "$TEST_DIRECTORY"/lib-read-tree-m-3way.sh -cat >.test-plain-OA <<\EOF -:000000 100644 0000000000000000000000000000000000000000 ccba72ad3888a3520b39efcf780b9ee64167535d A AA -:000000 100644 0000000000000000000000000000000000000000 7e426fb079479fd67f6d81f984e4ec649a44bc25 A AN -:100644 000000 bcc68ef997017466d5c9094bcf7692295f588c9a 0000000000000000000000000000000000000000 D DD -:000000 040000 0000000000000000000000000000000000000000 6d50f65d3bdab91c63444294d38f08aeff328e42 A DF -:100644 000000 141c1f1642328e4bc46a7d801a71da392e66791e 0000000000000000000000000000000000000000 D DM -:100644 000000 35abde1506ddf806572ff4d407bd06885d0f8ee9 0000000000000000000000000000000000000000 D DN -:000000 100644 0000000000000000000000000000000000000000 1d41122ebdd7a640f29d3c9cc4f9d70094374762 A LL -:100644 100644 03f24c8c4700babccfd28b654e7e8eac402ad6cd 103d9f89b50b9aad03054b579be5e7aa665f2d57 M MD -:100644 100644 b258508afb7ceb449981bd9d63d2d3e971bf8d34 b431b272d829ff3aa4d1a5085f4394ab4d3305b6 M MM -:100644 100644 bd084b0c27c7b6cc34f11d6d0509a29be3caf970 a716d58de4a570e0038f5c307bd8db34daea021f M MN -:100644 100644 40c959f984c8b89a2b02520d17f00d717f024397 2ac547ae9614a00d1b28275de608131f7a0e259f M SS -:100644 100644 4ac13458899ab908ef3b1128fa378daefc88d356 4c86f9a85fbc5e6804ee2e17a797538fbe785bca M TT -:040000 040000 7d670fdcdb9929f6c7dac196ff78689cd1c566a1 5e5f22072bb39f6e12cf663a57cb634c76eefb49 M Z +test_oid_init + +test_oid_cache <<\EOF +aa_1 sha1:ccba72ad3888a3520b39efcf780b9ee64167535d +aa_1 sha256:9febfbf18197819b2735c45291f138525d2476d59470f98239647544586ba403 + +aa_2 sha1:6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 +aa_2 sha256:6eaa3437de83f145a4aaa6ba355303075ade547b128ec6a2cd00a81ff7ce7a56 + +an_1 sha1:7e426fb079479fd67f6d81f984e4ec649a44bc25 +an_1 sha256:8f92a0bec99e399a38e3bd0e1bf19fbf121e0160efb29b857df79d439f1c4536 + +dd_1 sha1:bcc68ef997017466d5c9094bcf7692295f588c9a +dd_1 sha256:07e17428b00639b85485d2b01083d219e2f3e3ba8579e9ca44e9cc8dd554d952 + +df_1 sha1:6d50f65d3bdab91c63444294d38f08aeff328e42 +df_1 sha256:e367cecc27e9bf5451b1c65828cb21938d36a5f8e39c1b03ad6509cc36bb8e9d + +df_2 sha1:71420ab81e254145d26d6fc0cddee64c1acd4787 +df_2 sha256:0f0a86d10347ff6921d03a3c954679f3f1d14fa3d5cd82f57b32c09755f3a47d + +dfd1 sha1:68a6d8b91da11045cf4aa3a5ab9f2a781c701249 +dfd1 sha256:f3bd3265b02b6978ce86490d8ad026c573639c974b3de1d9faf30d8d5a77d3d5 + +dm_1 sha1:141c1f1642328e4bc46a7d801a71da392e66791e +dm_1 sha256:c89f8656e7b94e21ee5fbaf0e2149bbf783c51edbe2ce110349cac13059ee7ed + +dm_2 sha1:3c4d8de5fbad08572bab8e10eef8dbb264cf0231 +dm_2 sha256:83a572e37e0c94086294dae2cecc43d9131afd6f6c906e495c78972230b54988 + +dn_1 sha1:35abde1506ddf806572ff4d407bd06885d0f8ee9 +dn_1 sha256:775d5852582070e620be63327bfa515fab8f71c7ac3e4f0c3cd6267b4377ba28 + +ll_2 sha1:1d41122ebdd7a640f29d3c9cc4f9d70094374762 +ll_2 sha256:7917b4948a883cfed0a77d3d5a625dc8577d6ddcc3c6c3bbc56c4d4226a2246d + +md_1 sha1:03f24c8c4700babccfd28b654e7e8eac402ad6cd +md_1 sha256:fc9f30369b978595ad685ba11ca9a17de0af16d79cd4b629975f4f1590033902 + +md_2 sha1:103d9f89b50b9aad03054b579be5e7aa665f2d57 +md_2 sha256:fc78ec75275628762fe520479a6b2398dec295ce7aabcb1d15e5963c7b4e9317 + +mm_1 sha1:b258508afb7ceb449981bd9d63d2d3e971bf8d34 +mm_1 sha256:a4b7847d228e900e3000285e240c20fd96f9dd41ce1445305f6eada126d4a04a + +mm_2 sha1:b431b272d829ff3aa4d1a5085f4394ab4d3305b6 +mm_2 sha256:3f8b83ea36aacf689bcf1a1290a9a8ed341564d32682ea6f76fea9a979186782 + +mm_3 sha1:19989d4559aae417fedee240ccf2ba315ea4dc2b +mm_3 sha256:71b3bfc5747ac033fff9ea0ab39ee453a3af2969890e75d6ef547b87544e2681 + +mn_1 sha1:bd084b0c27c7b6cc34f11d6d0509a29be3caf970 +mn_1 sha256:47a67450583d7a329eb01a7c4ba644945af72c0ed2c7c95eb5a00d6e46d4d483 + +mn_2 sha1:a716d58de4a570e0038f5c307bd8db34daea021f +mn_2 sha256:f95104c1ebe27acb84bac25a7be98c71f6b8d3054b21f357a5be0c524ad97e08 + +nm_1 sha1:c8f25781e8f1792e3e40b74225e20553041b5226 +nm_1 sha256:09baddc7afaa62e62e152c23c9c3ab94bf15a3894031e227e9be7fe68e1f4e49 + +nm_2 sha1:cdb9a8c3da571502ac30225e9c17beccb8387983 +nm_2 sha256:58b5227956ac2d2a08d0efa513c0ae37430948b16791ea3869a1308dbf05536d + +na_1 sha1:15885881ea69115351c09b38371f0348a3fb8c67 +na_1 sha256:18e4fdd1670cd7968ee23d35bfd29e5418d56fb190c840094c1c57ceee0aad8f + +nd_1 sha1:a4e179e4291e5536a5e1c82e091052772d2c5a93 +nd_1 sha256:07dac9b01d00956ea0c65bd993d7de4864aeef2ed3cbb1255d9f1d949fcd6df6 + +ss_1 sha1:40c959f984c8b89a2b02520d17f00d717f024397 +ss_1 sha256:50fc1b5df74d9910db2f9270993484235f15b69b75b01bcfb53e059289d14af9 + +ss_2 sha1:2ac547ae9614a00d1b28275de608131f7a0e259f +ss_2 sha256:a90f02e6044f1497d13db587d22ab12f90150a7d1e084afcf96065fab35ae2bc + +tt_1 sha1:4ac13458899ab908ef3b1128fa378daefc88d356 +tt_1 sha256:c53113c7dd5060e86b5b251428bd058f6726f66273c6a24bff1c61a04f498dd3 + +tt_2 sha1:4c86f9a85fbc5e6804ee2e17a797538fbe785bca +tt_2 sha256:0775f2a296129a7cf2862b46bc0e88c14d593f2773a3e3fb1c5193db6f5a7e77 + +tt_3 sha1:c4e4a12231b9fa79a0053cb6077fcb21bb5b135a +tt_3 sha256:47860f93cdd211f96443e0560f21c57ab6c2f4b0ac27ff03651a352e53fe8484 + +z__1 sha1:7d670fdcdb9929f6c7dac196ff78689cd1c566a1 +z__1 sha256:44d0f37aff5e51cfcfdd1134c93a6419bcca7b9964f792ffcd5f9b4fcba1ee63 + +z__2 sha1:5e5f22072bb39f6e12cf663a57cb634c76eefb49 +z__2 sha256:d29de162113190fed104eb5f010820cef4e315f89b9326e8497f7219fb737894 + +z__3 sha1:1ba523955d5160681af65cb776411f574c1e8155 +z__3 sha256:07422d772b07794ab4369a5648e617719f89c2d2212cbeab05d97214b6471636 + +zaa1 sha1:8acb8e9750e3f644bf323fcf3d338849db106c77 +zaa1 sha256:e79b029282c8abec2d9f3f7faceaf2a1405e02d1f368e66450ae66cf5b68d1f4 + +zaa2 sha1:6c0b99286d0bce551ac4a7b3dff8b706edff3715 +zaa2 sha256:c82bd78c3e69ea1796e6b1a7a3ba45bb106c50e819296475b862123d3f5cc5a0 + +zan1 sha1:087494262084cefee7ed484d20c8dc0580791272 +zan1 sha256:4b159eb3804d05599023dd074f771d06d02870f4ab24a7165add8ac3d703b8d3 + +zdd1 sha1:879007efae624d2b1307214b24a956f0a8d686a8 +zdd1 sha256:eecfdd4d8092dd0363fb6d4548b54c6afc8982c3ed9b34e393f1d6a921d8eaa3 + +zdm1 sha1:9b541b2275c06e3a7b13f28badf5294e2ae63df4 +zdm1 sha256:ab136e88e19a843c4bf7713d2090d5a2186ba16a6a80dacc12eeddd256a8e556 + +zdm2 sha1:d77371d15817fcaa57eeec27f770c505ba974ec1 +zdm2 sha256:1c1a5f57363f46a15d95ce8527b3c2c158d88d16853b4acbf81bd20fd2c89a46 + +zdn1 sha1:beb5d38c55283d280685ea21a0e50cfcc0ca064a +zdn1 sha256:0f0eca66183617b0aa5ad74b256540329f841470922ca6760263c996d825eb18 + +zmd1 sha1:d41fda41b7ec4de46b43cb7ea42a45001ae393d5 +zmd1 sha256:1ed32d481852eddf31a0ce12652a0ad14bf5b7a842667b5dbb0b50f35bf1c80a + +zmd2 sha1:a79ac3be9377639e1c7d1edf1ae1b3a5f0ccd8a9 +zmd2 sha256:b238da211b404f8917df2d9c6f7030535e904b2186131007a3c292ec6902f933 + +zmm1 sha1:4ca22bae2527d3d9e1676498a0fba3b355bd1278 +zmm1 sha256:072b1d85b5f34fabc99dfa46008c5418df68302d3e317430006f49b32d244226 + +zmm2 sha1:61422ba9c2c873416061a88cd40a59a35b576474 +zmm2 sha256:81dd5d2b3c5cda16fef552256aed4e2ea0802a8450a08f308a92142112ff6dda + +zmm3 sha1:697aad7715a1e7306ca76290a3dd4208fbaeddfa +zmm3 sha256:8b10fab49e9be3414aa5e9a93d0e46f9569053440138a7c19a5eb5536d8e95bf + +zmn1 sha1:b16d7b25b869f2beb124efa53467d8a1550ad694 +zmn1 sha256:609e4f75d1295e844c826feeba213acb0b6cfc609adfe8ff705b19e3829ae3e9 + +zmn2 sha1:a5c544c21cfcb07eb80a4d89a5b7d1570002edfd +zmn2 sha256:d6d03edf2dc1a3b267a8205de5f41a2ff4b03def8c7ae02052b543fb09d589fc + +zna1 sha1:d12979c22fff69c59ca9409e7a8fe3ee25eaee80 +zna1 sha256:b37b80e789e8ea32aa323f004628f02013f632124b0282c7fe00a127d3c64c3c + +znd1 sha1:a18393c636b98e9bd7296b8b437ea4992b72440c +znd1 sha256:af92a22eee8c38410a0c9d2b5135a10aeb052cbc7cf675541ed9a67bfcaf7cf9 + +znm1 sha1:3fdbe17fd013303a2e981e1ca1c6cd6e72789087 +znm1 sha256:f75aeaa0c11e76918e381c105f0752932c6150e941fec565d24fa31098a13dc1 + +znm2 sha1:7e09d6a3a14bd630913e8c75693cea32157b606d +znm2 sha256:938d73cfbaa1c902a84fb5b3afd9736aa0590367fb9bd59c6c4d072ce70fcd6d +EOF + +cat >.test-plain-OA <<EOF +:000000 100644 $(test_oid zero) $(test_oid aa_1) A AA +:000000 100644 $(test_oid zero) $(test_oid an_1) A AN +:100644 000000 $(test_oid dd_1) $(test_oid zero) D DD +:000000 040000 $(test_oid zero) $(test_oid df_1) A DF +:100644 000000 $(test_oid dm_1) $(test_oid zero) D DM +:100644 000000 $(test_oid dn_1) $(test_oid zero) D DN +:000000 100644 $(test_oid zero) $(test_oid ll_2) A LL +:100644 100644 $(test_oid md_1) $(test_oid md_2) M MD +:100644 100644 $(test_oid mm_1) $(test_oid mm_2) M MM +:100644 100644 $(test_oid mn_1) $(test_oid mn_2) M MN +:100644 100644 $(test_oid ss_1) $(test_oid ss_2) M SS +:100644 100644 $(test_oid tt_1) $(test_oid tt_2) M TT +:040000 040000 $(test_oid z__1) $(test_oid z__2) M Z EOF -cat >.test-recursive-OA <<\EOF -:000000 100644 0000000000000000000000000000000000000000 ccba72ad3888a3520b39efcf780b9ee64167535d A AA -:000000 100644 0000000000000000000000000000000000000000 7e426fb079479fd67f6d81f984e4ec649a44bc25 A AN -:100644 000000 bcc68ef997017466d5c9094bcf7692295f588c9a 0000000000000000000000000000000000000000 D DD -:000000 100644 0000000000000000000000000000000000000000 68a6d8b91da11045cf4aa3a5ab9f2a781c701249 A DF/DF -:100644 000000 141c1f1642328e4bc46a7d801a71da392e66791e 0000000000000000000000000000000000000000 D DM -:100644 000000 35abde1506ddf806572ff4d407bd06885d0f8ee9 0000000000000000000000000000000000000000 D DN -:000000 100644 0000000000000000000000000000000000000000 1d41122ebdd7a640f29d3c9cc4f9d70094374762 A LL -:100644 100644 03f24c8c4700babccfd28b654e7e8eac402ad6cd 103d9f89b50b9aad03054b579be5e7aa665f2d57 M MD -:100644 100644 b258508afb7ceb449981bd9d63d2d3e971bf8d34 b431b272d829ff3aa4d1a5085f4394ab4d3305b6 M MM -:100644 100644 bd084b0c27c7b6cc34f11d6d0509a29be3caf970 a716d58de4a570e0038f5c307bd8db34daea021f M MN -:100644 100644 40c959f984c8b89a2b02520d17f00d717f024397 2ac547ae9614a00d1b28275de608131f7a0e259f M SS -:100644 100644 4ac13458899ab908ef3b1128fa378daefc88d356 4c86f9a85fbc5e6804ee2e17a797538fbe785bca M TT -:000000 100644 0000000000000000000000000000000000000000 8acb8e9750e3f644bf323fcf3d338849db106c77 A Z/AA -:000000 100644 0000000000000000000000000000000000000000 087494262084cefee7ed484d20c8dc0580791272 A Z/AN -:100644 000000 879007efae624d2b1307214b24a956f0a8d686a8 0000000000000000000000000000000000000000 D Z/DD -:100644 000000 9b541b2275c06e3a7b13f28badf5294e2ae63df4 0000000000000000000000000000000000000000 D Z/DM -:100644 000000 beb5d38c55283d280685ea21a0e50cfcc0ca064a 0000000000000000000000000000000000000000 D Z/DN -:100644 100644 d41fda41b7ec4de46b43cb7ea42a45001ae393d5 a79ac3be9377639e1c7d1edf1ae1b3a5f0ccd8a9 M Z/MD -:100644 100644 4ca22bae2527d3d9e1676498a0fba3b355bd1278 61422ba9c2c873416061a88cd40a59a35b576474 M Z/MM -:100644 100644 b16d7b25b869f2beb124efa53467d8a1550ad694 a5c544c21cfcb07eb80a4d89a5b7d1570002edfd M Z/MN +cat >.test-recursive-OA <<EOF +:000000 100644 $(test_oid zero) $(test_oid aa_1) A AA +:000000 100644 $(test_oid zero) $(test_oid an_1) A AN +:100644 000000 $(test_oid dd_1) $(test_oid zero) D DD +:000000 100644 $(test_oid zero) $(test_oid dfd1) A DF/DF +:100644 000000 $(test_oid dm_1) $(test_oid zero) D DM +:100644 000000 $(test_oid dn_1) $(test_oid zero) D DN +:000000 100644 $(test_oid zero) $(test_oid ll_2) A LL +:100644 100644 $(test_oid md_1) $(test_oid md_2) M MD +:100644 100644 $(test_oid mm_1) $(test_oid mm_2) M MM +:100644 100644 $(test_oid mn_1) $(test_oid mn_2) M MN +:100644 100644 $(test_oid ss_1) $(test_oid ss_2) M SS +:100644 100644 $(test_oid tt_1) $(test_oid tt_2) M TT +:000000 100644 $(test_oid zero) $(test_oid zaa1) A Z/AA +:000000 100644 $(test_oid zero) $(test_oid zan1) A Z/AN +:100644 000000 $(test_oid zdd1) $(test_oid zero) D Z/DD +:100644 000000 $(test_oid zdm1) $(test_oid zero) D Z/DM +:100644 000000 $(test_oid zdn1) $(test_oid zero) D Z/DN +:100644 100644 $(test_oid zmd1) $(test_oid zmd2) M Z/MD +:100644 100644 $(test_oid zmm1) $(test_oid zmm2) M Z/MM +:100644 100644 $(test_oid zmn1) $(test_oid zmn2) M Z/MN EOF -cat >.test-plain-OB <<\EOF -:000000 100644 0000000000000000000000000000000000000000 6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 A AA -:100644 000000 bcc68ef997017466d5c9094bcf7692295f588c9a 0000000000000000000000000000000000000000 D DD -:000000 100644 0000000000000000000000000000000000000000 71420ab81e254145d26d6fc0cddee64c1acd4787 A DF -:100644 100644 141c1f1642328e4bc46a7d801a71da392e66791e 3c4d8de5fbad08572bab8e10eef8dbb264cf0231 M DM -:000000 100644 0000000000000000000000000000000000000000 1d41122ebdd7a640f29d3c9cc4f9d70094374762 A LL -:100644 000000 03f24c8c4700babccfd28b654e7e8eac402ad6cd 0000000000000000000000000000000000000000 D MD -:100644 100644 b258508afb7ceb449981bd9d63d2d3e971bf8d34 19989d4559aae417fedee240ccf2ba315ea4dc2b M MM -:000000 100644 0000000000000000000000000000000000000000 15885881ea69115351c09b38371f0348a3fb8c67 A NA -:100644 000000 a4e179e4291e5536a5e1c82e091052772d2c5a93 0000000000000000000000000000000000000000 D ND -:100644 100644 c8f25781e8f1792e3e40b74225e20553041b5226 cdb9a8c3da571502ac30225e9c17beccb8387983 M NM -:100644 100644 40c959f984c8b89a2b02520d17f00d717f024397 2ac547ae9614a00d1b28275de608131f7a0e259f M SS -:100644 100644 4ac13458899ab908ef3b1128fa378daefc88d356 c4e4a12231b9fa79a0053cb6077fcb21bb5b135a M TT -:040000 040000 7d670fdcdb9929f6c7dac196ff78689cd1c566a1 1ba523955d5160681af65cb776411f574c1e8155 M Z +cat >.test-plain-OB <<EOF +:000000 100644 $(test_oid zero) $(test_oid aa_2) A AA +:100644 000000 $(test_oid dd_1) $(test_oid zero) D DD +:000000 100644 $(test_oid zero) $(test_oid df_2) A DF +:100644 100644 $(test_oid dm_1) $(test_oid dm_2) M DM +:000000 100644 $(test_oid zero) $(test_oid ll_2) A LL +:100644 000000 $(test_oid md_1) $(test_oid zero) D MD +:100644 100644 $(test_oid mm_1) $(test_oid mm_3) M MM +:000000 100644 $(test_oid zero) $(test_oid na_1) A NA +:100644 000000 $(test_oid nd_1) $(test_oid zero) D ND +:100644 100644 $(test_oid nm_1) $(test_oid nm_2) M NM +:100644 100644 $(test_oid ss_1) $(test_oid ss_2) M SS +:100644 100644 $(test_oid tt_1) $(test_oid tt_3) M TT +:040000 040000 $(test_oid z__1) $(test_oid z__3) M Z EOF -cat >.test-recursive-OB <<\EOF -:000000 100644 0000000000000000000000000000000000000000 6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 A AA -:100644 000000 bcc68ef997017466d5c9094bcf7692295f588c9a 0000000000000000000000000000000000000000 D DD -:000000 100644 0000000000000000000000000000000000000000 71420ab81e254145d26d6fc0cddee64c1acd4787 A DF -:100644 100644 141c1f1642328e4bc46a7d801a71da392e66791e 3c4d8de5fbad08572bab8e10eef8dbb264cf0231 M DM -:000000 100644 0000000000000000000000000000000000000000 1d41122ebdd7a640f29d3c9cc4f9d70094374762 A LL -:100644 000000 03f24c8c4700babccfd28b654e7e8eac402ad6cd 0000000000000000000000000000000000000000 D MD -:100644 100644 b258508afb7ceb449981bd9d63d2d3e971bf8d34 19989d4559aae417fedee240ccf2ba315ea4dc2b M MM -:000000 100644 0000000000000000000000000000000000000000 15885881ea69115351c09b38371f0348a3fb8c67 A NA -:100644 000000 a4e179e4291e5536a5e1c82e091052772d2c5a93 0000000000000000000000000000000000000000 D ND -:100644 100644 c8f25781e8f1792e3e40b74225e20553041b5226 cdb9a8c3da571502ac30225e9c17beccb8387983 M NM -:100644 100644 40c959f984c8b89a2b02520d17f00d717f024397 2ac547ae9614a00d1b28275de608131f7a0e259f M SS -:100644 100644 4ac13458899ab908ef3b1128fa378daefc88d356 c4e4a12231b9fa79a0053cb6077fcb21bb5b135a M TT -:000000 100644 0000000000000000000000000000000000000000 6c0b99286d0bce551ac4a7b3dff8b706edff3715 A Z/AA -:100644 000000 879007efae624d2b1307214b24a956f0a8d686a8 0000000000000000000000000000000000000000 D Z/DD -:100644 100644 9b541b2275c06e3a7b13f28badf5294e2ae63df4 d77371d15817fcaa57eeec27f770c505ba974ec1 M Z/DM -:100644 000000 d41fda41b7ec4de46b43cb7ea42a45001ae393d5 0000000000000000000000000000000000000000 D Z/MD -:100644 100644 4ca22bae2527d3d9e1676498a0fba3b355bd1278 697aad7715a1e7306ca76290a3dd4208fbaeddfa M Z/MM -:000000 100644 0000000000000000000000000000000000000000 d12979c22fff69c59ca9409e7a8fe3ee25eaee80 A Z/NA -:100644 000000 a18393c636b98e9bd7296b8b437ea4992b72440c 0000000000000000000000000000000000000000 D Z/ND -:100644 100644 3fdbe17fd013303a2e981e1ca1c6cd6e72789087 7e09d6a3a14bd630913e8c75693cea32157b606d M Z/NM +cat >.test-recursive-OB <<EOF +:000000 100644 $(test_oid zero) $(test_oid aa_2) A AA +:100644 000000 $(test_oid dd_1) $(test_oid zero) D DD +:000000 100644 $(test_oid zero) $(test_oid df_2) A DF +:100644 100644 $(test_oid dm_1) $(test_oid dm_2) M DM +:000000 100644 $(test_oid zero) $(test_oid ll_2) A LL +:100644 000000 $(test_oid md_1) $(test_oid zero) D MD +:100644 100644 $(test_oid mm_1) $(test_oid mm_3) M MM +:000000 100644 $(test_oid zero) $(test_oid na_1) A NA +:100644 000000 $(test_oid nd_1) $(test_oid zero) D ND +:100644 100644 $(test_oid nm_1) $(test_oid nm_2) M NM +:100644 100644 $(test_oid ss_1) $(test_oid ss_2) M SS +:100644 100644 $(test_oid tt_1) $(test_oid tt_3) M TT +:000000 100644 $(test_oid zero) $(test_oid zaa2) A Z/AA +:100644 000000 $(test_oid zdd1) $(test_oid zero) D Z/DD +:100644 100644 $(test_oid zdm1) $(test_oid zdm2) M Z/DM +:100644 000000 $(test_oid zmd1) $(test_oid zero) D Z/MD +:100644 100644 $(test_oid zmm1) $(test_oid zmm3) M Z/MM +:000000 100644 $(test_oid zero) $(test_oid zna1) A Z/NA +:100644 000000 $(test_oid znd1) $(test_oid zero) D Z/ND +:100644 100644 $(test_oid znm1) $(test_oid znm2) M Z/NM EOF -cat >.test-plain-AB <<\EOF -:100644 100644 ccba72ad3888a3520b39efcf780b9ee64167535d 6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 M AA -:100644 000000 7e426fb079479fd67f6d81f984e4ec649a44bc25 0000000000000000000000000000000000000000 D AN -:000000 100644 0000000000000000000000000000000000000000 71420ab81e254145d26d6fc0cddee64c1acd4787 A DF -:040000 000000 6d50f65d3bdab91c63444294d38f08aeff328e42 0000000000000000000000000000000000000000 D DF -:000000 100644 0000000000000000000000000000000000000000 3c4d8de5fbad08572bab8e10eef8dbb264cf0231 A DM -:000000 100644 0000000000000000000000000000000000000000 35abde1506ddf806572ff4d407bd06885d0f8ee9 A DN -:100644 000000 103d9f89b50b9aad03054b579be5e7aa665f2d57 0000000000000000000000000000000000000000 D MD -:100644 100644 b431b272d829ff3aa4d1a5085f4394ab4d3305b6 19989d4559aae417fedee240ccf2ba315ea4dc2b M MM -:100644 100644 a716d58de4a570e0038f5c307bd8db34daea021f bd084b0c27c7b6cc34f11d6d0509a29be3caf970 M MN -:000000 100644 0000000000000000000000000000000000000000 15885881ea69115351c09b38371f0348a3fb8c67 A NA -:100644 000000 a4e179e4291e5536a5e1c82e091052772d2c5a93 0000000000000000000000000000000000000000 D ND -:100644 100644 c8f25781e8f1792e3e40b74225e20553041b5226 cdb9a8c3da571502ac30225e9c17beccb8387983 M NM -:100644 100644 4c86f9a85fbc5e6804ee2e17a797538fbe785bca c4e4a12231b9fa79a0053cb6077fcb21bb5b135a M TT -:040000 040000 5e5f22072bb39f6e12cf663a57cb634c76eefb49 1ba523955d5160681af65cb776411f574c1e8155 M Z +cat >.test-plain-AB <<EOF +:100644 100644 $(test_oid aa_1) $(test_oid aa_2) M AA +:100644 000000 $(test_oid an_1) $(test_oid zero) D AN +:000000 100644 $(test_oid zero) $(test_oid df_2) A DF +:040000 000000 $(test_oid df_1) $(test_oid zero) D DF +:000000 100644 $(test_oid zero) $(test_oid dm_2) A DM +:000000 100644 $(test_oid zero) $(test_oid dn_1) A DN +:100644 000000 $(test_oid md_2) $(test_oid zero) D MD +:100644 100644 $(test_oid mm_2) $(test_oid mm_3) M MM +:100644 100644 $(test_oid mn_2) $(test_oid mn_1) M MN +:000000 100644 $(test_oid zero) $(test_oid na_1) A NA +:100644 000000 $(test_oid nd_1) $(test_oid zero) D ND +:100644 100644 $(test_oid nm_1) $(test_oid nm_2) M NM +:100644 100644 $(test_oid tt_2) $(test_oid tt_3) M TT +:040000 040000 $(test_oid z__2) $(test_oid z__3) M Z EOF -cat >.test-recursive-AB <<\EOF -:100644 100644 ccba72ad3888a3520b39efcf780b9ee64167535d 6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 M AA -:100644 000000 7e426fb079479fd67f6d81f984e4ec649a44bc25 0000000000000000000000000000000000000000 D AN -:000000 100644 0000000000000000000000000000000000000000 71420ab81e254145d26d6fc0cddee64c1acd4787 A DF -:100644 000000 68a6d8b91da11045cf4aa3a5ab9f2a781c701249 0000000000000000000000000000000000000000 D DF/DF -:000000 100644 0000000000000000000000000000000000000000 3c4d8de5fbad08572bab8e10eef8dbb264cf0231 A DM -:000000 100644 0000000000000000000000000000000000000000 35abde1506ddf806572ff4d407bd06885d0f8ee9 A DN -:100644 000000 103d9f89b50b9aad03054b579be5e7aa665f2d57 0000000000000000000000000000000000000000 D MD -:100644 100644 b431b272d829ff3aa4d1a5085f4394ab4d3305b6 19989d4559aae417fedee240ccf2ba315ea4dc2b M MM -:100644 100644 a716d58de4a570e0038f5c307bd8db34daea021f bd084b0c27c7b6cc34f11d6d0509a29be3caf970 M MN -:000000 100644 0000000000000000000000000000000000000000 15885881ea69115351c09b38371f0348a3fb8c67 A NA -:100644 000000 a4e179e4291e5536a5e1c82e091052772d2c5a93 0000000000000000000000000000000000000000 D ND -:100644 100644 c8f25781e8f1792e3e40b74225e20553041b5226 cdb9a8c3da571502ac30225e9c17beccb8387983 M NM -:100644 100644 4c86f9a85fbc5e6804ee2e17a797538fbe785bca c4e4a12231b9fa79a0053cb6077fcb21bb5b135a M TT -:100644 100644 8acb8e9750e3f644bf323fcf3d338849db106c77 6c0b99286d0bce551ac4a7b3dff8b706edff3715 M Z/AA -:100644 000000 087494262084cefee7ed484d20c8dc0580791272 0000000000000000000000000000000000000000 D Z/AN -:000000 100644 0000000000000000000000000000000000000000 d77371d15817fcaa57eeec27f770c505ba974ec1 A Z/DM -:000000 100644 0000000000000000000000000000000000000000 beb5d38c55283d280685ea21a0e50cfcc0ca064a A Z/DN -:100644 000000 a79ac3be9377639e1c7d1edf1ae1b3a5f0ccd8a9 0000000000000000000000000000000000000000 D Z/MD -:100644 100644 61422ba9c2c873416061a88cd40a59a35b576474 697aad7715a1e7306ca76290a3dd4208fbaeddfa M Z/MM -:100644 100644 a5c544c21cfcb07eb80a4d89a5b7d1570002edfd b16d7b25b869f2beb124efa53467d8a1550ad694 M Z/MN -:000000 100644 0000000000000000000000000000000000000000 d12979c22fff69c59ca9409e7a8fe3ee25eaee80 A Z/NA -:100644 000000 a18393c636b98e9bd7296b8b437ea4992b72440c 0000000000000000000000000000000000000000 D Z/ND -:100644 100644 3fdbe17fd013303a2e981e1ca1c6cd6e72789087 7e09d6a3a14bd630913e8c75693cea32157b606d M Z/NM +cat >.test-recursive-AB <<EOF +:100644 100644 $(test_oid aa_1) $(test_oid aa_2) M AA +:100644 000000 $(test_oid an_1) $(test_oid zero) D AN +:000000 100644 $(test_oid zero) $(test_oid df_2) A DF +:100644 000000 $(test_oid dfd1) $(test_oid zero) D DF/DF +:000000 100644 $(test_oid zero) $(test_oid dm_2) A DM +:000000 100644 $(test_oid zero) $(test_oid dn_1) A DN +:100644 000000 $(test_oid md_2) $(test_oid zero) D MD +:100644 100644 $(test_oid mm_2) $(test_oid mm_3) M MM +:100644 100644 $(test_oid mn_2) $(test_oid mn_1) M MN +:000000 100644 $(test_oid zero) $(test_oid na_1) A NA +:100644 000000 $(test_oid nd_1) $(test_oid zero) D ND +:100644 100644 $(test_oid nm_1) $(test_oid nm_2) M NM +:100644 100644 $(test_oid tt_2) $(test_oid tt_3) M TT +:100644 100644 $(test_oid zaa1) $(test_oid zaa2) M Z/AA +:100644 000000 $(test_oid zan1) $(test_oid zero) D Z/AN +:000000 100644 $(test_oid zero) $(test_oid zdm2) A Z/DM +:000000 100644 $(test_oid zero) $(test_oid zdn1) A Z/DN +:100644 000000 $(test_oid zmd2) $(test_oid zero) D Z/MD +:100644 100644 $(test_oid zmm2) $(test_oid zmm3) M Z/MM +:100644 100644 $(test_oid zmn2) $(test_oid zmn1) M Z/MN +:000000 100644 $(test_oid zero) $(test_oid zna1) A Z/NA +:100644 000000 $(test_oid znd1) $(test_oid zero) D Z/ND +:100644 100644 $(test_oid znm1) $(test_oid znm2) M Z/NM EOF cmp_diff_files_output () { diff --git a/t/t4009-diff-rename-4.sh b/t/t4009-diff-rename-4.sh index 3641fd84d6..b63bdf031f 100755 --- a/t/t4009-diff-rename-4.sh +++ b/t/t4009-diff-rename-4.sh @@ -14,6 +14,7 @@ test_expect_success \ 'cat "$TEST_DIRECTORY"/diff-lib/COPYING >COPYING && echo frotz >rezrov && git update-index --add COPYING rezrov && + orig=$(git hash-object COPYING) && tree=$(git write-tree) && echo $tree' @@ -22,6 +23,8 @@ test_expect_success \ 'sed -e 's/HOWEVER/However/' <COPYING >COPYING.1 && sed -e 's/GPL/G.P.L/g' <COPYING >COPYING.2 && rm -f COPYING && + c1=$(git hash-object COPYING.1) && + c2=$(git hash-object COPYING.2) && git update-index --add --remove COPYING COPYING.?' # tree has COPYING and rezrov. work tree has COPYING.1 and COPYING.2, @@ -31,11 +34,11 @@ test_expect_success \ git diff-index -z -C $tree >current -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 0603b3238a076dc6c8022aedc6648fa523a17178 C1234 +cat >expected <<EOF +:100644 100644 $orig $c1 C1234 COPYING COPYING.1 -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 06c67961bbaed34a127f76d261f4c0bf73eda471 R1234 +:100644 100644 $orig $c2 R1234 COPYING COPYING.2 EOF @@ -57,10 +60,10 @@ test_expect_success \ # about rezrov. git diff-index -z -C $tree >current -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 06c67961bbaed34a127f76d261f4c0bf73eda471 M +cat >expected <<EOF +:100644 100644 $orig $c2 M COPYING -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 0603b3238a076dc6c8022aedc6648fa523a17178 C1234 +:100644 100644 $orig $c1 C1234 COPYING COPYING.1 EOF @@ -82,8 +85,8 @@ test_expect_success \ git update-index --add --remove COPYING COPYING.1' git diff-index -z -C --find-copies-harder $tree >current -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 0603b3238a076dc6c8022aedc6648fa523a17178 C1234 +cat >expected <<EOF +:100644 100644 $orig $c1 C1234 COPYING COPYING.1 EOF diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 9f8f0e84ad..5ac94b390d 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -7,9 +7,6 @@ test_description='Various diff formatting options' . ./test-lib.sh -LF=' -' - test_expect_success setup ' GIT_AUTHOR_DATE="2006-06-26 00:00:00 +0000" && @@ -338,6 +335,8 @@ format-patch --inline --stdout initial..master^^ format-patch --stdout --cover-letter -n initial..master^ diff --abbrev initial..side +diff -U initial..side +diff -U1 initial..side diff -r initial..side diff --stat initial..side diff -r --stat initial..side diff --git a/t/t4013/diff.diff_-U1_initial..side b/t/t4013/diff.diff_-U1_initial..side new file mode 100644 index 0000000000..b69f8f048a --- /dev/null +++ b/t/t4013/diff.diff_-U1_initial..side @@ -0,0 +1,29 @@ +$ git diff -U1 initial..side +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -2 +2,3 @@ A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -3 +3,4 @@ + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 +$ diff --git a/t/t4013/diff.diff_-U2_initial..side b/t/t4013/diff.diff_-U2_initial..side new file mode 100644 index 0000000000..8ffe04f203 --- /dev/null +++ b/t/t4013/diff.diff_-U2_initial..side @@ -0,0 +1,31 @@ +$ git diff -U2 initial..side +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -2,2 +2,5 @@ + 2 + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 +$ diff --git a/t/t4013/diff.diff_-U_initial..side b/t/t4013/diff.diff_-U_initial..side new file mode 100644 index 0000000000..c66c0dd5c6 --- /dev/null +++ b/t/t4013/diff.diff_-U_initial..side @@ -0,0 +1,32 @@ +$ git diff -U initial..side +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 +$ diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 909c743c13..83f52614d3 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -9,7 +9,6 @@ test_description='various format-patch tests' . "$TEST_DIRECTORY"/lib-terminal.sh test_expect_success setup ' - for i in 1 2 3 4 5 6 7 8 9 10; do echo "$i"; done >file && cat file >elif && git add file elif && @@ -34,39 +33,54 @@ test_expect_success setup ' git commit -m "Side changes #3 with \\n backslash-n in it." && git checkout master && - git diff-tree -p C2 | git apply --index && + git diff-tree -p C2 >patch && + git apply --index <patch && test_tick && - git commit -m "Master accepts moral equivalent of #2" + git commit -m "Master accepts moral equivalent of #2" && -' + git checkout side && + git checkout -b patchid && + for i in 5 6 1 2 3 A 4 B C 7 8 9 10 D E F; do echo "$i"; done >file2 && + for i in 1 2 3 A 4 B C 7 8 9 10 D E F 5 6; do echo "$i"; done >file3 && + for i in 8 9 10; do echo "$i"; done >file && + git add file file2 file3 && + test_tick && + git commit -m "patchid 1" && + for i in 4 A B 7 8 9 10; do echo "$i"; done >file2 && + for i in 8 9 10 5 6; do echo "$i"; done >file3 && + git add file2 file3 && + test_tick && + git commit -m "patchid 2" && + for i in 10 5 6; do echo "$i"; done >file && + git add file && + test_tick && + git commit -m "patchid 3" && -test_expect_success "format-patch --ignore-if-in-upstream" ' + git checkout master +' +test_expect_success 'format-patch --ignore-if-in-upstream' ' git format-patch --stdout master..side >patch0 && - cnt=$(grep "^From " patch0 | wc -l) && - test $cnt = 3 - + grep "^From " patch0 >from0 && + test_line_count = 3 from0 ' -test_expect_success "format-patch --ignore-if-in-upstream" ' - +test_expect_success 'format-patch --ignore-if-in-upstream' ' git format-patch --stdout \ --ignore-if-in-upstream master..side >patch1 && - cnt=$(grep "^From " patch1 | wc -l) && - test $cnt = 2 - + grep "^From " patch1 >from1 && + test_line_count = 2 from1 ' -test_expect_success "format-patch --ignore-if-in-upstream handles tags" ' +test_expect_success 'format-patch --ignore-if-in-upstream handles tags' ' git tag -a v1 -m tag side && git tag -a v2 -m tag master && git format-patch --stdout --ignore-if-in-upstream v2..v1 >patch1 && - cnt=$(grep "^From " patch1 | wc -l) && - test $cnt = 2 + grep "^From " patch1 >from1 && + test_line_count = 2 from1 ' test_expect_success "format-patch doesn't consider merge commits" ' - git checkout -b slave master && echo "Another line" >>file && test_tick && @@ -77,148 +91,138 @@ test_expect_success "format-patch doesn't consider merge commits" ' git checkout -b merger master && test_tick && git merge --no-ff slave && - cnt=$(git format-patch -3 --stdout | grep "^From " | wc -l) && - test $cnt = 3 + git format-patch -3 --stdout >patch && + grep "^From " patch >from && + test_line_count = 3 from ' -test_expect_success "format-patch result applies" ' - +test_expect_success 'format-patch result applies' ' git checkout -b rebuild-0 master && git am -3 patch0 && - cnt=$(git rev-list master.. | wc -l) && - test $cnt = 2 + git rev-list master.. >list && + test_line_count = 2 list ' -test_expect_success "format-patch --ignore-if-in-upstream result applies" ' - +test_expect_success 'format-patch --ignore-if-in-upstream result applies' ' git checkout -b rebuild-1 master && git am -3 patch1 && - cnt=$(git rev-list master.. | wc -l) && - test $cnt = 2 + git rev-list master.. >list && + test_line_count = 2 list ' test_expect_success 'commit did not screw up the log message' ' - - git cat-file commit side | grep "^Side .* with .* backslash-n" - + git cat-file commit side >actual && + grep "^Side .* with .* backslash-n" actual ' test_expect_success 'format-patch did not screw up the log message' ' - grep "^Subject: .*Side changes #3 with .* backslash-n" patch0 && grep "^Subject: .*Side changes #3 with .* backslash-n" patch1 - ' test_expect_success 'replay did not screw up the log message' ' - - git cat-file commit rebuild-1 | grep "^Side .* with .* backslash-n" - + git cat-file commit rebuild-1 >actual && + grep "^Side .* with .* backslash-n" actual ' test_expect_success 'extra headers' ' - git config format.headers "To: R E Cipient <rcipient@example.com> " && git config --add format.headers "Cc: S E Cipient <scipient@example.com> " && - git format-patch --stdout master..side > patch2 && - sed -e "/^\$/q" patch2 > hdrs2 && + git format-patch --stdout master..side >patch2 && + sed -e "/^\$/q" patch2 >hdrs2 && grep "^To: R E Cipient <rcipient@example.com>\$" hdrs2 && grep "^Cc: S E Cipient <scipient@example.com>\$" hdrs2 - ' test_expect_success 'extra headers without newlines' ' - git config --replace-all format.headers "To: R E Cipient <rcipient@example.com>" && git config --add format.headers "Cc: S E Cipient <scipient@example.com>" && git format-patch --stdout master..side >patch3 && - sed -e "/^\$/q" patch3 > hdrs3 && + sed -e "/^\$/q" patch3 >hdrs3 && grep "^To: R E Cipient <rcipient@example.com>\$" hdrs3 && grep "^Cc: S E Cipient <scipient@example.com>\$" hdrs3 - ' test_expect_success 'extra headers with multiple To:s' ' - git config --replace-all format.headers "To: R E Cipient <rcipient@example.com>" && git config --add format.headers "To: S E Cipient <scipient@example.com>" && - git format-patch --stdout master..side > patch4 && - sed -e "/^\$/q" patch4 > hdrs4 && + git format-patch --stdout master..side >patch4 && + sed -e "/^\$/q" patch4 >hdrs4 && grep "^To: R E Cipient <rcipient@example.com>,\$" hdrs4 && grep "^ *S E Cipient <scipient@example.com>\$" hdrs4 ' test_expect_success 'additional command line cc (ascii)' ' - git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" && - git format-patch --cc="S E Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch5 && - grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch5 && - grep "^ *S E Cipient <scipient@example.com>\$" patch5 + git format-patch --cc="S E Cipient <scipient@example.com>" --stdout master..side >patch5 && + sed -e "/^\$/q" patch5 >hdrs5 && + grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs5 && + grep "^ *S E Cipient <scipient@example.com>\$" hdrs5 ' test_expect_failure 'additional command line cc (rfc822)' ' - git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" && - git format-patch --cc="S. E. Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch5 && - grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch5 && - grep "^ *\"S. E. Cipient\" <scipient@example.com>\$" patch5 + git format-patch --cc="S. E. Cipient <scipient@example.com>" --stdout master..side >patch5 && + sed -e "/^\$/q" patch5 >hdrs5 && + grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs5 && + grep "^ *\"S. E. Cipient\" <scipient@example.com>\$" hdrs5 ' test_expect_success 'command line headers' ' - git config --unset-all format.headers && - git format-patch --add-header="Cc: R E Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch6 && - grep "^Cc: R E Cipient <rcipient@example.com>\$" patch6 + git format-patch --add-header="Cc: R E Cipient <rcipient@example.com>" --stdout master..side >patch6 && + sed -e "/^\$/q" patch6 >hdrs6 && + grep "^Cc: R E Cipient <rcipient@example.com>\$" hdrs6 ' test_expect_success 'configuration headers and command line headers' ' - git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" && - git format-patch --add-header="Cc: S E Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch7 && - grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch7 && - grep "^ *S E Cipient <scipient@example.com>\$" patch7 + git format-patch --add-header="Cc: S E Cipient <scipient@example.com>" --stdout master..side >patch7 && + sed -e "/^\$/q" patch7 >hdrs7 && + grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs7 && + grep "^ *S E Cipient <scipient@example.com>\$" hdrs7 ' test_expect_success 'command line To: header (ascii)' ' - git config --unset-all format.headers && - git format-patch --to="R E Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 && - grep "^To: R E Cipient <rcipient@example.com>\$" patch8 + git format-patch --to="R E Cipient <rcipient@example.com>" --stdout master..side >patch8 && + sed -e "/^\$/q" patch8 >hdrs8 && + grep "^To: R E Cipient <rcipient@example.com>\$" hdrs8 ' test_expect_failure 'command line To: header (rfc822)' ' - - git format-patch --to="R. E. Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 && - grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" patch8 + git format-patch --to="R. E. Cipient <rcipient@example.com>" --stdout master..side >patch8 && + sed -e "/^\$/q" patch8 >hdrs8 && + grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" hdrs8 ' test_expect_failure 'command line To: header (rfc2047)' ' - - git format-patch --to="R Ä Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 && - grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" patch8 + git format-patch --to="R Ä Cipient <rcipient@example.com>" --stdout master..side >patch8 && + sed -e "/^\$/q" patch8 >hdrs8 && + grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" hdrs8 ' test_expect_success 'configuration To: header (ascii)' ' - git config format.to "R E Cipient <rcipient@example.com>" && - git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 && - grep "^To: R E Cipient <rcipient@example.com>\$" patch9 + git format-patch --stdout master..side >patch9 && + sed -e "/^\$/q" patch9 >hdrs9 && + grep "^To: R E Cipient <rcipient@example.com>\$" hdrs9 ' test_expect_failure 'configuration To: header (rfc822)' ' - git config format.to "R. E. Cipient <rcipient@example.com>" && - git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 && - grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" patch9 + git format-patch --stdout master..side >patch9 && + sed -e "/^\$/q" patch9 >hdrs9 && + grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" hdrs9 ' test_expect_failure 'configuration To: header (rfc2047)' ' - git config format.to "R Ä Cipient <rcipient@example.com>" && - git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 && - grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" patch9 + git format-patch --stdout master..side >patch9 && + sed -e "/^\$/q" patch9 >hdrs9 && + grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" hdrs9 ' # check_patch <patch>: Verify that <patch> looks like a half-sane @@ -230,89 +234,79 @@ check_patch () { } test_expect_success 'format.from=false' ' - - git -c format.from=false format-patch --stdout master..side | - sed -e "/^\$/q" >patch && + git -c format.from=false format-patch --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && check_patch patch && - ! grep "^From: C O Mitter <committer@example.com>\$" patch + ! grep "^From: C O Mitter <committer@example.com>\$" hdrs ' test_expect_success 'format.from=true' ' - - git -c format.from=true format-patch --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - grep "^From: C O Mitter <committer@example.com>\$" patch + git -c format.from=true format-patch --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + grep "^From: C O Mitter <committer@example.com>\$" hdrs ' test_expect_success 'format.from with address' ' - - git -c format.from="F R Om <from@example.com>" format-patch --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - grep "^From: F R Om <from@example.com>\$" patch + git -c format.from="F R Om <from@example.com>" format-patch --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + grep "^From: F R Om <from@example.com>\$" hdrs ' test_expect_success '--no-from overrides format.from' ' - - git -c format.from="F R Om <from@example.com>" format-patch --no-from --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - ! grep "^From: F R Om <from@example.com>\$" patch + git -c format.from="F R Om <from@example.com>" format-patch --no-from --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + ! grep "^From: F R Om <from@example.com>\$" hdrs ' test_expect_success '--from overrides format.from' ' - - git -c format.from="F R Om <from@example.com>" format-patch --from --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - ! grep "^From: F R Om <from@example.com>\$" patch + git -c format.from="F R Om <from@example.com>" format-patch --from --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + ! grep "^From: F R Om <from@example.com>\$" hdrs ' test_expect_success '--no-to overrides config.to' ' - git config --replace-all format.to \ "R E Cipient <rcipient@example.com>" && - git format-patch --no-to --stdout master..side | - sed -e "/^\$/q" >patch10 && - check_patch patch10 && - ! grep "^To: R E Cipient <rcipient@example.com>\$" patch10 + git format-patch --no-to --stdout master..side >patch10 && + sed -e "/^\$/q" patch10 >hdrs10 && + check_patch hdrs10 && + ! grep "^To: R E Cipient <rcipient@example.com>\$" hdrs10 ' test_expect_success '--no-to and --to replaces config.to' ' - git config --replace-all format.to \ "Someone <someone@out.there>" && git format-patch --no-to --to="Someone Else <else@out.there>" \ - --stdout master..side | - sed -e "/^\$/q" >patch11 && - check_patch patch11 && - ! grep "^To: Someone <someone@out.there>\$" patch11 && - grep "^To: Someone Else <else@out.there>\$" patch11 + --stdout master..side >patch11 && + sed -e "/^\$/q" patch11 >hdrs11 && + check_patch hdrs11 && + ! grep "^To: Someone <someone@out.there>\$" hdrs11 && + grep "^To: Someone Else <else@out.there>\$" hdrs11 ' test_expect_success '--no-cc overrides config.cc' ' - git config --replace-all format.cc \ "C E Cipient <rcipient@example.com>" && - git format-patch --no-cc --stdout master..side | - sed -e "/^\$/q" >patch12 && - check_patch patch12 && - ! grep "^Cc: C E Cipient <rcipient@example.com>\$" patch12 + git format-patch --no-cc --stdout master..side >patch12 && + sed -e "/^\$/q" patch12 >hdrs12 && + check_patch hdrs12 && + ! grep "^Cc: C E Cipient <rcipient@example.com>\$" hdrs12 ' test_expect_success '--no-add-header overrides config.headers' ' - git config --replace-all format.headers \ "Header1: B E Cipient <rcipient@example.com>" && - git format-patch --no-add-header --stdout master..side | - sed -e "/^\$/q" >patch13 && - check_patch patch13 && - ! grep "^Header1: B E Cipient <rcipient@example.com>\$" patch13 + git format-patch --no-add-header --stdout master..side >patch13 && + sed -e "/^\$/q" patch13 >hdrs13 && + check_patch hdrs13 && + ! grep "^Header1: B E Cipient <rcipient@example.com>\$" hdrs13 ' test_expect_success 'multiple files' ' - rm -rf patches/ && git checkout side && git format-patch -o patches/ master && @@ -338,7 +332,7 @@ test_expect_success 'reroll count (-v)' ' check_threading () { expect="$1" && shift && - (git format-patch --stdout "$@"; echo $? > status.out) | + git format-patch --stdout "$@" >patch && # Prints everything between the Message-ID and In-Reply-To, # and replaces all Message-ID-lookalikes by a sequence number perl -ne ' @@ -353,12 +347,11 @@ check_threading () { print; } print "---\n" if /^From /i; - ' > actual && - test 0 = "$(cat status.out)" && + ' <patch >actual && test_cmp "$expect" actual } -cat >> expect.no-threading <<EOF +cat >>expect.no-threading <<EOF --- --- --- @@ -369,7 +362,7 @@ test_expect_success 'no threading' ' check_threading expect.no-threading master ' -cat > expect.thread <<EOF +cat >expect.thread <<EOF --- Message-Id: <0> --- @@ -386,7 +379,7 @@ test_expect_success 'thread' ' check_threading expect.thread --thread master ' -cat > expect.in-reply-to <<EOF +cat >expect.in-reply-to <<EOF --- Message-Id: <0> In-Reply-To: <1> @@ -406,7 +399,7 @@ test_expect_success 'thread in-reply-to' ' --thread master ' -cat > expect.cover-letter <<EOF +cat >expect.cover-letter <<EOF --- Message-Id: <0> --- @@ -427,7 +420,7 @@ test_expect_success 'thread cover-letter' ' check_threading expect.cover-letter --cover-letter --thread master ' -cat > expect.cl-irt <<EOF +cat >expect.cl-irt <<EOF --- Message-Id: <0> In-Reply-To: <1> @@ -459,7 +452,7 @@ test_expect_success 'thread explicit shallow' ' --in-reply-to="<test.message>" --thread=shallow master ' -cat > expect.deep <<EOF +cat >expect.deep <<EOF --- Message-Id: <0> --- @@ -477,7 +470,7 @@ test_expect_success 'thread deep' ' check_threading expect.deep --thread=deep master ' -cat > expect.deep-irt <<EOF +cat >expect.deep-irt <<EOF --- Message-Id: <0> In-Reply-To: <1> @@ -500,7 +493,7 @@ test_expect_success 'thread deep in-reply-to' ' --in-reply-to="<test.message>" master ' -cat > expect.deep-cl <<EOF +cat >expect.deep-cl <<EOF --- Message-Id: <0> --- @@ -524,7 +517,7 @@ test_expect_success 'thread deep cover-letter' ' check_threading expect.deep-cl --cover-letter --thread=deep master ' -cat > expect.deep-cl-irt <<EOF +cat >expect.deep-cl-irt <<EOF --- Message-Id: <0> In-Reply-To: <1> @@ -575,7 +568,6 @@ test_expect_success 'thread config + --no-thread' ' ' test_expect_success 'excessive subject' ' - rm -rf patches/ && git checkout side && before=$(git hash-object file) && @@ -589,6 +581,12 @@ test_expect_success 'excessive subject' ' ls patches/0004-This-is-an-excessively-long-subject-line-for-a-messa.patch ' +test_expect_success 'failure to write cover-letter aborts gracefully' ' + test_when_finished "rmdir 0000-cover-letter.patch" && + mkdir 0000-cover-letter.patch && + test_must_fail git format-patch --no-renames --cover-letter -1 +' + test_expect_success 'cover-letter inherits diff options' ' git mv file foo && git commit -m foo && @@ -597,10 +595,9 @@ test_expect_success 'cover-letter inherits diff options' ' ! grep "file => foo .* 0 *\$" 0000-cover-letter.patch && git format-patch --cover-letter -1 -M && grep "file => foo .* 0 *\$" 0000-cover-letter.patch - ' -cat > expect << EOF +cat >expect <<EOF This is an excessively long subject line for a message due to the habit some projects have of not having a short, one-line subject at the start of the commit message, but rather sticking a whole @@ -611,14 +608,12 @@ cat > expect << EOF EOF test_expect_success 'shortlog of cover-letter wraps overly-long onelines' ' - git format-patch --cover-letter -2 && - sed -e "1,/A U Thor/d" -e "/^\$/q" < 0000-cover-letter.patch > output && + sed -e "1,/A U Thor/d" -e "/^\$/q" 0000-cover-letter.patch >output && test_cmp expect output - ' -cat > expect << EOF +cat >expect <<EOF index $before..$after 100644 --- a/file +++ b/file @@ -631,16 +626,14 @@ index $before..$after 100644 EOF test_expect_success 'format-patch respects -U' ' - git format-patch -U4 -2 && sed -e "1,/^diff/d" -e "/^+5/q" \ <0001-This-is-an-excessively-long-subject-line-for-a-messa.patch \ >output && test_cmp expect output - ' -cat > expect << EOF +cat >expect <<EOF diff --git a/file b/file index $before..$after 100644 @@ -654,11 +647,9 @@ index $before..$after 100644 EOF test_expect_success 'format-patch -p suppresses stat' ' - git format-patch -p -2 && - sed -e "1,/^\$/d" -e "/^+5/q" < 0001-This-is-an-excessively-long-subject-line-for-a-messa.patch > output && + sed -e "1,/^\$/d" -e "/^+5/q" 0001-This-is-an-excessively-long-subject-line-for-a-messa.patch >output && test_cmp expect output - ' test_expect_success 'format-patch from a subdirectory (1)' ' @@ -711,7 +702,7 @@ test_expect_success 'format-patch from a subdirectory (3)' ' ' test_expect_success 'format-patch --in-reply-to' ' - git format-patch -1 --stdout --in-reply-to "baz@foo.bar" > patch8 && + git format-patch -1 --stdout --in-reply-to "baz@foo.bar" >patch8 && grep "^In-Reply-To: <baz@foo.bar>" patch8 && grep "^References: <baz@foo.bar>" patch8 ' @@ -732,21 +723,94 @@ test_expect_success 'format-patch --notes --signoff' ' sed "1,/^---$/d" out | grep "test message" ' -echo "fatal: --name-only does not make sense" > expect.name-only -echo "fatal: --name-status does not make sense" > expect.name-status -echo "fatal: --check does not make sense" > expect.check +test_expect_success 'format-patch notes output control' ' + git notes add -m "notes config message" HEAD && + test_when_finished git notes remove HEAD && + + git format-patch -1 --stdout >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --notes >out && + grep "notes config message" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --notes --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --no-notes --notes >out && + grep "notes config message" out && + + test_config format.notes true && + git format-patch -1 --stdout >out && + grep "notes config message" out && + git format-patch -1 --stdout --notes >out && + grep "notes config message" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --notes --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --no-notes --notes >out && + grep "notes config message" out +' + +test_expect_success 'format-patch with multiple notes refs' ' + git notes --ref note1 add -m "this is note 1" HEAD && + test_when_finished git notes --ref note1 remove HEAD && + git notes --ref note2 add -m "this is note 2" HEAD && + test_when_finished git notes --ref note2 remove HEAD && + + git format-patch -1 --stdout >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --notes=note1 >out && + grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --notes=note2 >out && + ! grep "this is note 1" out && + grep "this is note 2" out && + git format-patch -1 --stdout --notes=note1 --notes=note2 >out && + grep "this is note 1" out && + grep "this is note 2" out && + + test_config format.notes note1 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --notes=note2 >out && + grep "this is note 1" out && + grep "this is note 2" out && + git format-patch -1 --stdout --no-notes --notes=note2 >out && + ! grep "this is note 1" out && + grep "this is note 2" out && + + git config --add format.notes note2 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + grep "this is note 2" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out +' + +echo "fatal: --name-only does not make sense" >expect.name-only +echo "fatal: --name-status does not make sense" >expect.name-status +echo "fatal: --check does not make sense" >expect.check test_expect_success 'options no longer allowed for format-patch' ' - test_must_fail git format-patch --name-only 2> output && + test_must_fail git format-patch --name-only 2>output && test_i18ncmp expect.name-only output && - test_must_fail git format-patch --name-status 2> output && + test_must_fail git format-patch --name-status 2>output && test_i18ncmp expect.name-status output && - test_must_fail git format-patch --check 2> output && - test_i18ncmp expect.check output' + test_must_fail git format-patch --check 2>output && + test_i18ncmp expect.check output +' test_expect_success 'format-patch --numstat should produce a patch' ' - git format-patch --numstat --stdout master..side > output && - test 5 = $(grep "^diff --git a/" output | wc -l)' + git format-patch --numstat --stdout master..side >output && + grep "^diff --git a/" output >diff && + test_line_count = 5 diff +' test_expect_success 'format-patch -- <path>' ' git format-patch master..side -- file 2>error && @@ -757,20 +821,25 @@ test_expect_success 'format-patch --ignore-if-in-upstream HEAD' ' git format-patch --ignore-if-in-upstream HEAD ' -git_version="$(git --version | sed "s/.* //")" +test_expect_success 'get git version' ' + git_version=$(git --version) && + git_version=${git_version##* } +' signature() { printf "%s\n%s\n\n" "-- " "${1:-$git_version}" } test_expect_success 'format-patch default signature' ' - git format-patch --stdout -1 | tail -n 3 >output && + git format-patch --stdout -1 >patch && + tail -n 3 patch >output && signature >expect && test_cmp expect output ' test_expect_success 'format-patch --signature' ' - git format-patch --stdout --signature="my sig" -1 | tail -n 3 >output && + git format-patch --stdout --signature="my sig" -1 >patch && + tail -n 3 patch >output && signature "my sig" >expect && test_cmp expect output ' @@ -802,8 +871,8 @@ test_expect_success 'format-patch --signature --cover-letter' ' git config --unset-all format.signature && git format-patch --stdout --signature="my sig" --cover-letter \ -1 >output && - grep "my sig" output && - test 2 = $(grep "my sig" output | wc -l) + grep "my sig" output >sig && + test_line_count = 2 sig ' test_expect_success 'format.signature="" suppresses signatures' ' @@ -840,7 +909,7 @@ test_expect_success 'prepare mail-signature input' ' test_expect_success '--signature-file=file works' ' git format-patch --stdout --signature-file=mail-signature -1 >output && check_patch output && - sed -e "1,/^-- \$/d" <output >actual && + sed -e "1,/^-- \$/d" output >actual && { cat mail-signature && echo } >expect && @@ -851,7 +920,7 @@ test_expect_success 'format.signaturefile works' ' test_config format.signaturefile mail-signature && git format-patch --stdout -1 >output && check_patch output && - sed -e "1,/^-- \$/d" <output >actual && + sed -e "1,/^-- \$/d" output >actual && { cat mail-signature && echo } >expect && @@ -873,7 +942,7 @@ test_expect_success '--signature-file overrides format.signaturefile' ' git format-patch --stdout \ --signature-file=other-mail-signature -1 >output && check_patch output && - sed -e "1,/^-- \$/d" <output >actual && + sed -e "1,/^-- \$/d" output >actual && { cat other-mail-signature && echo } >expect && @@ -942,7 +1011,7 @@ test_expect_success 'format-patch wraps extremely long subject (ascii)' ' git add file && git commit -m "$M512" && git format-patch --stdout -1 >patch && - sed -n "/^Subject/p; /^ /p; /^$/q" <patch >subject && + sed -n "/^Subject/p; /^ /p; /^$/q" patch >subject && test_cmp expect subject ' @@ -981,7 +1050,7 @@ test_expect_success 'format-patch wraps extremely long subject (rfc2047)' ' git add file && git commit -m "$M512" && git format-patch --stdout -1 >patch && - sed -n "/^Subject/p; /^ /p; /^$/q" <patch >subject && + sed -n "/^Subject/p; /^ /p; /^$/q" patch >subject && test_cmp expect subject ' @@ -990,7 +1059,7 @@ check_author() { git add file && GIT_AUTHOR_NAME=$1 git commit -m author-check && git format-patch --stdout -1 >patch && - sed -n "/^From: /p; /^ /p; /^$/q" <patch >actual && + sed -n "/^From: /p; /^ /p; /^$/q" patch >actual && test_cmp expect actual } @@ -1110,7 +1179,7 @@ test_expect_success '--from=ident replaces author' ' From: A U Thor <author@example.com> EOF - sed -ne "/^From:/p; /^$/p; /^---$/q" <patch >patch.head && + sed -ne "/^From:/p; /^$/p; /^---$/q" patch >patch.head && test_cmp expect patch.head ' @@ -1122,7 +1191,7 @@ test_expect_success '--from uses committer ident' ' From: A U Thor <author@example.com> EOF - sed -ne "/^From:/p; /^$/p; /^---$/q" <patch >patch.head && + sed -ne "/^From:/p; /^$/p; /^---$/q" patch >patch.head && test_cmp expect patch.head ' @@ -1132,7 +1201,7 @@ test_expect_success '--from omits redundant in-body header' ' From: A U Thor <author@example.com> EOF - sed -ne "/^From:/p; /^$/p; /^---$/q" <patch >patch.head && + sed -ne "/^From:/p; /^$/p; /^---$/q" patch >patch.head && test_cmp expect patch.head ' @@ -1147,7 +1216,7 @@ test_expect_success 'in-body headers trigger content encoding' ' From: éxötìc <author@example.com> EOF - sed -ne "/^From:/p; /^$/p; /^Content-Type/p; /^---$/q" <patch >patch.head && + sed -ne "/^From:/p; /^$/p; /^Content-Type/p; /^---$/q" patch >patch.head && test_cmp expect patch.head ' @@ -1161,283 +1230,283 @@ append_signoff() test_expect_success 'signoff: commit with no body' ' append_signoff </dev/null >actual && - cat <<\EOF | sed "s/EOL$//" >expected && -4:Subject: [PATCH] EOL -8: -9:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat <<-\EOF | sed "s/EOL$//" >expect && + 4:Subject: [PATCH] EOL + 8: + 9:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: commit with only subject' ' echo subject | append_signoff >actual && - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: commit with only subject that does not end with NL' ' printf subject | append_signoff >actual && - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: no existing signoffs' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + body + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: no existing signoffs and no trailing NL' ' printf "subject\n\nbody" | append_signoff >actual && - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: some random signoff' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Signed-off-by: my@house -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: my@house -12:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Signed-off-by: my@house + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: my@house + 12:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: misc conforming footer elements' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Signed-off-by: my@house -(cherry picked from commit da39a3ee5e6b4b0d3255bfef95601890afd80709) -Tested-by: Some One <someone@example.com> -Bug: 1234 -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: my@house -15:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Signed-off-by: my@house + (cherry picked from commit da39a3ee5e6b4b0d3255bfef95601890afd80709) + Tested-by: Some One <someone@example.com> + Bug: 1234 + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: my@house + 15:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: some random signoff-alike' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body -Fooled-by-me: my@house -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -11: -12:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + body + Fooled-by-me: my@house + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 11: + 12:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: not really a signoff' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -I want to mention about Signed-off-by: here. -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:I want to mention about Signed-off-by: here. -10: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + I want to mention about Signed-off-by: here. + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:I want to mention about Signed-off-by: here. + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: not really a signoff (2)' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -My unfortunate -Signed-off-by: example happens to be wrapped here. -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10:Signed-off-by: example happens to be wrapped here. -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + My unfortunate + Signed-off-by: example happens to be wrapped here. + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10:Signed-off-by: example happens to be wrapped here. + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: valid S-o-b paragraph in the middle' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -Signed-off-by: my@house -Signed-off-by: your@house + Signed-off-by: my@house + Signed-off-by: your@house -A lot of houses. -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:Signed-off-by: my@house -10:Signed-off-by: your@house -11: -13: -14:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + A lot of houses. + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:Signed-off-by: my@house + 10:Signed-off-by: your@house + 11: + 13: + 14:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: the same signoff at the end' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Signed-off-by: C O Mitter <committer@example.com> -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Signed-off-by: C O Mitter <committer@example.com> + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: the same signoff at the end, no trailing NL' ' printf "subject\n\nSigned-off-by: C O Mitter <committer@example.com>" | append_signoff >actual && - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: the same signoff NOT at the end' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Signed-off-by: C O Mitter <committer@example.com> -Signed-off-by: my@house -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: C O Mitter <committer@example.com> -12:Signed-off-by: my@house -EOF - test_cmp expected actual + Signed-off-by: C O Mitter <committer@example.com> + Signed-off-by: my@house + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + 12:Signed-off-by: my@house + EOF + test_cmp expect actual ' test_expect_success 'signoff: tolerate garbage in conforming footer' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Tested-by: my@house -Some Trash -Signed-off-by: C O Mitter <committer@example.com> -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -13:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Tested-by: my@house + Some Trash + Signed-off-by: C O Mitter <committer@example.com> + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 13:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: respect trailer config' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -Myfooter: x -Some Trash -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -11: -12:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual && + Myfooter: x + Some Trash + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 11: + 12:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual && test_config trailer.Myfooter.ifexists add && - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -Myfooter: x -Some Trash -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Myfooter: x + Some Trash + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: footer begins with non-signoff without @ sign' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Reviewed-id: Noone -Tested-by: my@house -Change-id: Ideadbeef -Signed-off-by: C O Mitter <committer@example.com> -Bug: 1234 -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -14:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Reviewed-id: Noone + Tested-by: my@house + Change-id: Ideadbeef + Signed-off-by: C O Mitter <committer@example.com> + Bug: 1234 + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 14:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'format patch ignores color.ui' ' @@ -1452,42 +1521,42 @@ test_expect_success 'cover letter using branch description (1)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter master >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (2)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter rebuild-1~2..rebuild-1 >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (3)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter ^master rebuild-1 >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (4)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter master.. >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (5)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter -2 HEAD >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (6)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter -2 >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter with nothing' ' @@ -1541,7 +1610,8 @@ test_expect_success 'format-patch format.outputDirectory option' ' test_config format.outputDirectory patches && rm -fr patches && git format-patch master..side && - test $(git rev-list master..side | wc -l) -eq $(ls patches | wc -l) + git rev-list master..side >list && + test_line_count = $(ls patches | wc -l) list ' test_expect_success 'format-patch -o overrides format.outputDirectory' ' @@ -1553,16 +1623,44 @@ test_expect_success 'format-patch -o overrides format.outputDirectory' ' ' test_expect_success 'format-patch --base' ' - git checkout side && - git format-patch --stdout --base=HEAD~3 -1 | tail -n 7 >actual1 && - git format-patch --stdout --base=HEAD~3 HEAD~.. | tail -n 7 >actual2 && - echo >expected && - echo "base-commit: $(git rev-parse HEAD~3)" >>expected && - echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --stable | awk "{print \$1}")" >>expected && - echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --stable | awk "{print \$1}")" >>expected && - signature >> expected && - test_cmp expected actual1 && - test_cmp expected actual2 + git checkout patchid && + + git format-patch --stdout --base=HEAD~3 -1 >patch && + tail -n 7 patch >actual1 && + + git format-patch --stdout --base=HEAD~3 HEAD~.. >patch && + tail -n 7 patch >actual2 && + + echo >expect && + git rev-parse HEAD~3 >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >>expect && + + git show --patch HEAD~2 >patch && + git patch-id --stable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>expect && + + git show --patch HEAD~1 >patch && + git patch-id --stable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>expect && + + signature >>expect && + test_cmp expect actual1 && + test_cmp expect actual2 && + + echo >fail && + echo "base-commit: $(cat commit-id-base)" >>fail && + + git show --patch HEAD~2 >patch && + git patch-id --unstable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>fail && + + git show --patch HEAD~1 >patch && + git patch-id --unstable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>fail && + + signature >>fail && + ! test_cmp fail actual1 && + ! test_cmp fail actual2 ' test_expect_success 'format-patch --base errors out when base commit is in revision list' ' @@ -1570,8 +1668,9 @@ test_expect_success 'format-patch --base errors out when base commit is in revis test_must_fail git format-patch --base=HEAD~1 -2 && git format-patch --stdout --base=HEAD~2 -2 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse HEAD~2)" >expected && - test_cmp expected actual + git rev-parse HEAD~2 >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual ' test_expect_success 'format-patch --base errors out when base commit is not ancestor of revision list' ' @@ -1597,8 +1696,8 @@ test_expect_success 'format-patch --base errors out when base commit is not ance test_must_fail git format-patch --base=$(cat commit-id-Z) -3 && git format-patch --stdout --base=$(cat commit-id-base) -3 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(cat commit-id-base)" >expected && - test_cmp expected actual + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual ' test_expect_success 'format-patch --base=auto' ' @@ -1609,8 +1708,9 @@ test_expect_success 'format-patch --base=auto' ' test_commit N2 && git format-patch --stdout --base=auto -2 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse upstream)" >expected && - test_cmp expected actual + git rev-parse upstream >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual ' test_expect_success 'format-patch errors out when history involves criss-cross' ' @@ -1646,8 +1746,9 @@ test_expect_success 'format-patch format.useAutoBaseoption' ' git config format.useAutoBase true && git format-patch --stdout -1 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse upstream)" >expected && - test_cmp expected actual + git rev-parse upstream >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual ' test_expect_success 'format-patch --base overrides format.useAutoBase' ' @@ -1655,8 +1756,9 @@ test_expect_success 'format-patch --base overrides format.useAutoBase' ' git config format.useAutoBase true && git format-patch --stdout --base=HEAD~1 -1 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse HEAD~1)" >expected && - test_cmp expected actual + git rev-parse HEAD~1 >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual ' test_expect_success 'format-patch --base with --attach' ' @@ -1731,7 +1833,7 @@ test_expect_success 'interdiff: cover-letter' ' git format-patch --cover-letter --interdiff=boop~2 -1 boop && test_i18ngrep "^Interdiff:$" 0000-cover-letter.patch && test_i18ngrep ! "^Interdiff:$" 0001-fleep.patch && - sed "1,/^@@ /d; /^-- $/q" <0000-cover-letter.patch >actual && + sed "1,/^@@ /d; /^-- $/q" 0000-cover-letter.patch >actual && test_cmp expect actual ' @@ -1747,7 +1849,7 @@ test_expect_success 'interdiff: solo-patch' ' EOF git format-patch --interdiff=boop~2 -1 boop && test_i18ngrep "^Interdiff:$" 0001-fleep.patch && - sed "1,/^ @@ /d; /^$/q" <0001-fleep.patch >actual && + sed "1,/^ @@ /d; /^$/q" 0001-fleep.patch >actual && test_cmp expect actual ' diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index ab4670d236..6b087df3dc 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -2008,4 +2008,26 @@ test_expect_success 'compare mixed whitespace delta across moved blocks' ' test_cmp expected actual ' +# Note that the "6" in the expected hunk header below is funny, since we only +# show 5 lines (the missing one was blank and thus ignored). This is how +# --ignore-blank-lines behaves even without --function-context, and this test +# is just checking the interaction of the two features. Don't take it as an +# endorsement of that output. +test_expect_success 'combine --ignore-blank-lines with --function-context' ' + test_write_lines 1 "" 2 3 4 5 >a && + test_write_lines 1 2 3 4 >b && + test_must_fail git diff --no-index \ + --ignore-blank-lines --function-context a b >actual.raw && + sed -n "/@@/,\$p" <actual.raw >actual && + cat <<-\EOF >expect && + @@ -1,6 +1,4 @@ + 1 + 2 + 3 + 4 + -5 + EOF + test_cmp expect actual +' + test_done diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index 22f9f88f0a..6f5ef0035e 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -31,6 +31,7 @@ diffpatterns=" cpp csharp css + dts fortran fountain golang @@ -43,6 +44,7 @@ diffpatterns=" php python ruby + rust tex custom1 custom2 diff --git a/t/t4018/dts-labels b/t/t4018/dts-labels new file mode 100644 index 0000000000..b21ef8737b --- /dev/null +++ b/t/t4018/dts-labels @@ -0,0 +1,9 @@ +/ { + label_1: node1@ff00 { + label2: RIGHT { + vendor,some-property; + + ChangeMe = <0x45-30>; + }; + }; +}; diff --git a/t/t4018/dts-node-unitless b/t/t4018/dts-node-unitless new file mode 100644 index 0000000000..c5287d9141 --- /dev/null +++ b/t/t4018/dts-node-unitless @@ -0,0 +1,8 @@ +/ { + label_1: node1 { + RIGHT { + prop-array = <1>, <4>; + ChangeMe = <0xffeedd00>; + }; + }; +}; diff --git a/t/t4018/dts-nodes b/t/t4018/dts-nodes new file mode 100644 index 0000000000..5a4334bb16 --- /dev/null +++ b/t/t4018/dts-nodes @@ -0,0 +1,8 @@ +/ { + label_1: node1@ff00 { + RIGHT@deadf00,4000 { + #size-cells = <1>; + ChangeMe = <0xffeedd00>; + }; + }; +}; diff --git a/t/t4018/dts-nodes-comment1 b/t/t4018/dts-nodes-comment1 new file mode 100644 index 0000000000..559dfce9b3 --- /dev/null +++ b/t/t4018/dts-nodes-comment1 @@ -0,0 +1,8 @@ +/ { + label_1: node1@ff00 { + RIGHT@deadf00,4000 /* &a comment */ { + #size-cells = <1>; + ChangeMe = <0xffeedd00>; + }; + }; +}; diff --git a/t/t4018/dts-nodes-comment2 b/t/t4018/dts-nodes-comment2 new file mode 100644 index 0000000000..27e9718b31 --- /dev/null +++ b/t/t4018/dts-nodes-comment2 @@ -0,0 +1,8 @@ +/ { + label_1: node1@ff00 { + RIGHT@deadf00,4000 { /* a trailing comment */ + #size-cells = <1>; + ChangeMe = <0xffeedd00>; + }; + }; +}; diff --git a/t/t4018/dts-reference b/t/t4018/dts-reference new file mode 100644 index 0000000000..8f0c87d863 --- /dev/null +++ b/t/t4018/dts-reference @@ -0,0 +1,9 @@ +&label_1 { + TEST = <455>; +}; + +&RIGHT { + vendor,some-property; + + ChangeMe = <0x45-30>; +}; diff --git a/t/t4018/dts-root b/t/t4018/dts-root new file mode 100644 index 0000000000..2ef9e6ffaa --- /dev/null +++ b/t/t4018/dts-root @@ -0,0 +1,5 @@ +/RIGHT { /* Technically just supposed to be a slash */ + #size-cells = <1>; + + ChangeMe = <0xffeedd00>; +}; diff --git a/t/t4018/matlab-class-definition b/t/t4018/matlab-class-definition new file mode 100644 index 0000000000..84daedfb4e --- /dev/null +++ b/t/t4018/matlab-class-definition @@ -0,0 +1,5 @@ +classdef RIGHT + properties + ChangeMe + end +end diff --git a/t/t4018/matlab-function b/t/t4018/matlab-function new file mode 100644 index 0000000000..897a9b13ff --- /dev/null +++ b/t/t4018/matlab-function @@ -0,0 +1,4 @@ +function y = RIGHT() +x = 5; +y = ChangeMe + x; +end diff --git a/t/t4018/matlab-octave-section-1 b/t/t4018/matlab-octave-section-1 new file mode 100644 index 0000000000..3bb6c4670e --- /dev/null +++ b/t/t4018/matlab-octave-section-1 @@ -0,0 +1,3 @@ +%%% RIGHT section +# this is octave script +ChangeMe = 1; diff --git a/t/t4018/matlab-octave-section-2 b/t/t4018/matlab-octave-section-2 new file mode 100644 index 0000000000..ab2980f7f2 --- /dev/null +++ b/t/t4018/matlab-octave-section-2 @@ -0,0 +1,3 @@ +## RIGHT section +# this is octave script +ChangeMe = 1; diff --git a/t/t4018/matlab-section b/t/t4018/matlab-section new file mode 100644 index 0000000000..5ea59a5de0 --- /dev/null +++ b/t/t4018/matlab-section @@ -0,0 +1,3 @@ +%% RIGHT section +% this is understood by both matlab and octave +ChangeMe = 1; diff --git a/t/t4018/rust-fn b/t/t4018/rust-fn new file mode 100644 index 0000000000..cbe02155f1 --- /dev/null +++ b/t/t4018/rust-fn @@ -0,0 +1,5 @@ +pub(self) fn RIGHT<T>(x: &[T]) where T: Debug { + let _ = x; + // a comment + let a = ChangeMe; +} diff --git a/t/t4018/rust-impl b/t/t4018/rust-impl new file mode 100644 index 0000000000..09df3cd93b --- /dev/null +++ b/t/t4018/rust-impl @@ -0,0 +1,5 @@ +impl<'a, T: AsRef<[u8]>> std::RIGHT for Git<'a> { + + pub fn ChangeMe(&self) -> () { + } +} diff --git a/t/t4018/rust-struct b/t/t4018/rust-struct new file mode 100644 index 0000000000..76aff1c0d8 --- /dev/null +++ b/t/t4018/rust-struct @@ -0,0 +1,5 @@ +#[derive(Debug)] +pub(super) struct RIGHT<'a> { + name: &'a str, + age: ChangeMe, +} diff --git a/t/t4018/rust-trait b/t/t4018/rust-trait new file mode 100644 index 0000000000..ea397f09ed --- /dev/null +++ b/t/t4018/rust-trait @@ -0,0 +1,5 @@ +unsafe trait RIGHT<T> { + fn len(&self) -> u32; + fn ChangeMe(&self, n: u32) -> T; + fn iter<F>(&self, f: F) where F: Fn(T); +} diff --git a/t/t4034-diff-words.sh b/t/t4034-diff-words.sh index 912df91226..9a93c2a3e0 100755 --- a/t/t4034-diff-words.sh +++ b/t/t4034-diff-words.sh @@ -303,6 +303,7 @@ test_language_driver bibtex test_language_driver cpp test_language_driver csharp test_language_driver css +test_language_driver dts test_language_driver fortran test_language_driver html test_language_driver java diff --git a/t/t4034/dts/expect b/t/t4034/dts/expect new file mode 100644 index 0000000000..560fc99184 --- /dev/null +++ b/t/t4034/dts/expect @@ -0,0 +1,37 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index b6a9051..7803aee 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,32 +1,32 @@<RESET> +/ {<RESET> + <RED>this_handle<RESET><GREEN>HANDLE_2<RESET>: <RED>node<RESET><GREEN>new-node<RESET>@<RED>f00<RESET><GREEN>eeda<RESET> { + compatible = "<RED>mydev<RESET><GREEN>vendor,compat<RESET>"; + string-prop = <RED>start<RESET><GREEN>end<RESET>: "hello <RED>world!<RESET><GREEN>world?<RESET>" <RED>end<RESET><GREEN>start<RESET>: ; + <RED>#size-cells<RESET><GREEN>#address-cells<RESET> = <<RED>0+0<RESET><GREEN>0+40<RESET>>; + reg = <<RED>0xf00<RESET><GREEN>0xeeda<RESET>>; + prop = <<GREEN>(<RESET>1<GREEN>)<RESET>>; + prop = <<GREEN>(<RESET>-1e10<GREEN>)<RESET>>; + prop = <(!<RED>3<RESET><GREEN>1<RESET>)>; + prop = <(~<RED>3<RESET><GREEN>1<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>*<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>&<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>*<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>/<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>%<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3+4<RESET><GREEN>1+2<RESET>)>; + prop = <(<RED>3-4<RESET><GREEN>1-2<RESET>)>; + prop = /bits/ <RED>64<RESET><GREEN>32<RESET> <(<RED>3<RESET><GREEN>1<RESET><<<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>>><RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>&<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>^<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>|<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>&&<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>||<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>4?5<RESET><GREEN>1?2<RESET>:3)>; + list = <&<RED>this_handle<RESET><GREEN>HANDLE_2<RESET>>, <0 0 0 <RED>0<RESET><GREEN>1<RESET>>; + };<RESET> + + &<RED>phandle<RESET><GREEN>phandle2<RESET> { + <RED>pre-phandle<RESET><GREEN>prop_handle<RESET> = <&<RED>this_handle<RESET><GREEN>HANDLE_2<RESET>>; + };<RESET> +};<RESET> diff --git a/t/t4034/dts/post b/t/t4034/dts/post new file mode 100644 index 0000000000..7803aee280 --- /dev/null +++ b/t/t4034/dts/post @@ -0,0 +1,32 @@ +/ { + HANDLE_2: new-node@eeda { + compatible = "vendor,compat"; + string-prop = end: "hello world?" start: ; + #address-cells = <0+40>; + reg = <0xeeda>; + prop = <(1)>; + prop = <(-1e10)>; + prop = <(!1)>; + prop = <(~1)>; + prop = <(1*2)>; + prop = <(1&2)>; + prop = <(1*2)>; + prop = <(1/2)>; + prop = <(1%2)>; + prop = <(1+2)>; + prop = <(1-2)>; + prop = /bits/ 32 <(1<<2)>; + prop = <(1>>2)>; + prop = <(1&2)>; + prop = <(1^2)>; + prop = <(1|2)>; + prop = <(1&&2)>; + prop = <(1||2)>; + prop = <(1?2:3)>; + list = <&HANDLE_2>, <0 0 0 1>; + }; + + &phandle2 { + prop_handle = <&HANDLE_2>; + }; +}; diff --git a/t/t4034/dts/pre b/t/t4034/dts/pre new file mode 100644 index 0000000000..b6a905113c --- /dev/null +++ b/t/t4034/dts/pre @@ -0,0 +1,32 @@ +/ { + this_handle: node@f00 { + compatible = "mydev"; + string-prop = start: "hello world!" end: ; + #size-cells = <0+0>; + reg = <0xf00>; + prop = <1>; + prop = <-1e10>; + prop = <(!3)>; + prop = <(~3)>; + prop = <(3*4)>; + prop = <(3&4)>; + prop = <(3*4)>; + prop = <(3/4)>; + prop = <(3%4)>; + prop = <(3+4)>; + prop = <(3-4)>; + prop = /bits/ 64 <(3<<4)>; + prop = <(3>>4)>; + prop = <(3&4)>; + prop = <(3^4)>; + prop = <(3|4)>; + prop = <(3&&4)>; + prop = <(3||4)>; + prop = <(4?5:3)>; + list = <&this_handle>, <0 0 0 0>; + }; + + &phandle { + pre-phandle = <&this_handle>; + }; +}; diff --git a/t/t4038-diff-combined.sh b/t/t4038-diff-combined.sh index e2824d3437..d4afe12554 100755 --- a/t/t4038-diff-combined.sh +++ b/t/t4038-diff-combined.sh @@ -435,4 +435,92 @@ test_expect_success 'combine diff gets tree sorting right' ' test_cmp expect actual ' +test_expect_success 'setup for --combined-all-paths' ' + git branch side1c && + git branch side2c && + git checkout side1c && + test_seq 1 10 >filename-side1c && + git add filename-side1c && + git commit -m with && + git checkout side2c && + test_seq 1 9 >filename-side2c && + echo ten >>filename-side2c && + git add filename-side2c && + git commit -m iam && + git checkout -b mergery side1c && + git merge --no-commit side2c && + git rm filename-side1c && + echo eleven >>filename-side2c && + git mv filename-side2c filename-merged && + git add filename-merged && + git commit +' + +test_expect_success '--combined-all-paths and --raw' ' + cat <<-\EOF >expect && + ::100644 100644 100644 f00c965d8307308469e537302baa73048488f162 088bd5d92c2a8e0203ca8e7e4c2a5c692f6ae3f7 333b9c62519f285e1854830ade0fe1ef1d40ee1b RR filename-side1c filename-side2c filename-merged + EOF + git diff-tree -c -M --raw --combined-all-paths HEAD >actual.tmp && + sed 1d <actual.tmp >actual && + test_cmp expect actual +' + +test_expect_success '--combined-all-paths and --cc' ' + cat <<-\EOF >expect && + --- a/filename-side1c + --- a/filename-side2c + +++ b/filename-merged + EOF + git diff-tree --cc -M --combined-all-paths HEAD >actual.tmp && + grep ^[-+][-+][-+] <actual.tmp >actual && + test_cmp expect actual +' + +test_expect_success FUNNYNAMES 'setup for --combined-all-paths with funny names' ' + git branch side1d && + git branch side2d && + git checkout side1d && + test_seq 1 10 >"$(printf "file\twith\ttabs")" && + git add file* && + git commit -m with && + git checkout side2d && + test_seq 1 9 >"$(printf "i\tam\ttabbed")" && + echo ten >>"$(printf "i\tam\ttabbed")" && + git add *tabbed && + git commit -m iam && + git checkout -b funny-names-mergery side1d && + git merge --no-commit side2d && + git rm *tabs && + echo eleven >>"$(printf "i\tam\ttabbed")" && + git mv "$(printf "i\tam\ttabbed")" "$(printf "fickle\tnaming")" && + git add fickle* && + git commit +' + +test_expect_success FUNNYNAMES '--combined-all-paths and --raw and funny names' ' + cat <<-\EOF >expect && + ::100644 100644 100644 f00c965d8307308469e537302baa73048488f162 088bd5d92c2a8e0203ca8e7e4c2a5c692f6ae3f7 333b9c62519f285e1854830ade0fe1ef1d40ee1b RR "file\twith\ttabs" "i\tam\ttabbed" "fickle\tnaming" + EOF + git diff-tree -c -M --raw --combined-all-paths HEAD >actual.tmp && + sed 1d <actual.tmp >actual && + test_cmp expect actual +' + +test_expect_success FUNNYNAMES '--combined-all-paths and --raw -and -z and funny names' ' + printf "aaf8087c3cbd4db8e185a2d074cf27c53cfb75d7\0::100644 100644 100644 f00c965d8307308469e537302baa73048488f162 088bd5d92c2a8e0203ca8e7e4c2a5c692f6ae3f7 333b9c62519f285e1854830ade0fe1ef1d40ee1b RR\0file\twith\ttabs\0i\tam\ttabbed\0fickle\tnaming\0" >expect && + git diff-tree -c -M --raw --combined-all-paths -z HEAD >actual && + test_cmp -a expect actual +' + +test_expect_success FUNNYNAMES '--combined-all-paths and --cc and funny names' ' + cat <<-\EOF >expect && + --- "a/file\twith\ttabs" + --- "a/i\tam\ttabbed" + +++ "b/fickle\tnaming" + EOF + git diff-tree --cc -M --combined-all-paths HEAD >actual.tmp && + grep ^[-+][-+][-+] <actual.tmp >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4053-diff-no-index.sh b/t/t4053-diff-no-index.sh index 6e0dd6f9e5..0168946b63 100755 --- a/t/t4053-diff-no-index.sh +++ b/t/t4053-diff-no-index.sh @@ -50,8 +50,7 @@ test_expect_success 'git diff --no-index executed outside repo gives correct err export GIT_CEILING_DIRECTORIES && cd non/git && test_must_fail git diff --no-index a 2>actual.err && - echo "usage: git diff --no-index <path> <path>" >expect.err && - test_cmp expect.err actual.err + test_i18ngrep "usage: git diff --no-index" actual.err ) ' @@ -137,4 +136,12 @@ test_expect_success 'diff --no-index from repo subdir with absolute paths' ' test_cmp expect actual ' +test_expect_success 'diff --no-index allows external diff' ' + test_expect_code 1 \ + env GIT_EXTERNAL_DIFF="echo external ;:" \ + git diff --no-index non/git/a non/git/b >actual && + echo external >expect && + test_cmp expect actual +' + test_done diff --git a/t/t4067-diff-partial-clone.sh b/t/t4067-diff-partial-clone.sh new file mode 100755 index 0000000000..4831ad35e6 --- /dev/null +++ b/t/t4067-diff-partial-clone.sh @@ -0,0 +1,134 @@ +#!/bin/sh + +test_description='behavior of diff when reading objects in a partial clone' + +. ./test-lib.sh + +test_expect_success 'git show batches blobs' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure that there is exactly 1 negotiation by checking that there is + # only 1 "done" line sent. ("done" marks the end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client show HEAD && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_expect_success 'diff batches blobs' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + git -C server commit -m x && + echo c >server/c && + echo d >server/d && + git -C server add c d && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure that there is exactly 1 negotiation by checking that there is + # only 1 "done" line sent. ("done" marks the end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff HEAD^ HEAD && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_expect_success 'diff skips same-OID blobs' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + git -C server commit -m x && + echo another-a >server/a && + git -C server add a && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + echo a | git hash-object --stdin >hash-old-a && + echo another-a | git hash-object --stdin >hash-new-a && + echo b | git hash-object --stdin >hash-b && + + # Ensure that only a and another-a are fetched. + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff HEAD^ HEAD && + grep "want $(cat hash-old-a)" trace && + grep "want $(cat hash-new-a)" trace && + ! grep "want $(cat hash-b)" trace +' + +test_expect_success 'when fetching missing objects, diff skips GITLINKs' ' + test_when_finished "rm -rf sub server client trace" && + + test_create_repo sub && + test_commit -C sub first && + + test_create_repo server && + echo a >server/a && + git -C server add a && + git -C server submodule add "file://$(pwd)/sub" && + git -C server commit -m x && + + test_commit -C server/sub second && + echo another-a >server/a && + git -C server add a sub && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + echo a | git hash-object --stdin >hash-old-a && + echo another-a | git hash-object --stdin >hash-new-a && + + # Ensure that a and another-a are fetched, and check (by successful + # execution of the diff) that no invalid OIDs are sent. + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff HEAD^ HEAD && + grep "want $(cat hash-old-a)" trace && + grep "want $(cat hash-new-a)" trace +' + +test_expect_success 'diff with rename detection batches blobs' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + printf "b\nb\nb\nb\nb\n" >server/b && + git -C server add a b && + git -C server commit -m x && + rm server/b && + printf "b\nb\nb\nb\nbX\n" >server/c && + git -C server add c && + git -C server commit -a -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure that there is exactly 1 negotiation by checking that there is + # only 1 "done" line sent. ("done" marks the end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff -M HEAD^ HEAD >out && + grep "similarity index" out && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 55b577d919..4f1e24ecbe 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -77,14 +77,12 @@ test_expect_success 'setup: messages' ' printf "Subject: " >subject-prefix && - cat - subject-prefix msg-without-scissors-line >msg-with-scissors-line <<-\EOF && + cat - subject-prefix msg-without-scissors-line >msg-with-scissors-line <<-\EOF This line should not be included in the commit message with --scissors enabled. - - >8 - - remove everything above this line - - >8 - - EOF - - signoff="Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" ' test_expect_success setup ' @@ -1063,4 +1061,56 @@ test_expect_success 'am --quit keeps HEAD where it is' ' test_cmp expected actual ' +test_expect_success 'am and .gitattibutes' ' + test_create_repo attributes && + ( + cd attributes && + test_commit init && + git config filter.test.clean "sed -e '\''s/smudged/clean/g'\''" && + git config filter.test.smudge "sed -e '\''s/clean/smudged/g'\''" && + + test_commit second && + git checkout -b test HEAD^ && + + echo "*.txt filter=test conflict-marker-size=10" >.gitattributes && + git add .gitattributes && + test_commit third && + + echo "This text is smudged." >a.txt && + git add a.txt && + test_commit fourth && + + git checkout -b removal HEAD^ && + git rm .gitattributes && + git add -u && + test_commit fifth && + git cherry-pick test && + + git checkout -b conflict third && + echo "This text is different." >a.txt && + git add a.txt && + test_commit sixth && + + git checkout test && + git format-patch --stdout master..HEAD >patches && + git reset --hard master && + git am patches && + grep "smudged" a.txt && + + git checkout removal && + git reset --hard && + git format-patch --stdout master..HEAD >patches && + git reset --hard master && + git am patches && + grep "clean" a.txt && + + git checkout conflict && + git reset --hard && + git format-patch --stdout master..HEAD >patches && + git reset --hard fourth && + test_must_fail git am -3 patches && + grep "<<<<<<<<<<" a.txt + ) +' + test_done diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 819c24d10e..e803ba402e 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -352,7 +352,7 @@ test_expect_success 'log with grep.patternType configuration and command line' ' test_cmp expect actual ' -test_expect_success 'log with various grep.patternType configurations & command-lines' ' +test_expect_success !FAIL_PREREQS 'log with various grep.patternType configurations & command-lines' ' git init pattern-type && ( cd pattern-type && @@ -837,6 +837,21 @@ test_expect_success 'decorate-refs and decorate-refs-exclude' ' test_cmp expect.decorate actual ' +test_expect_success 'decorate-refs-exclude and simplify-by-decoration' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (HEAD -> master) + reach (tag: reach, reach) + seventh (tag: seventh) + Merge-branch-tangle + Merge-branch-side-early-part-into-tangle (tangle) + tangle-a (tag: tangle-a) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs-exclude="*octopus*" \ + --simplify-by-decoration >actual && + test_cmp expect.decorate actual +' + test_expect_success 'log.decorate config parsing' ' git log --oneline --decorate=full >expect.full && git log --oneline --decorate=short >expect.short && @@ -1707,4 +1722,11 @@ test_expect_success '--exclude-promisor-objects does not BUG-crash' ' test_must_fail git log --exclude-promisor-objects source-a ' +test_expect_success 'log --end-of-options' ' + git update-ref refs/heads/--source HEAD && + git log --end-of-options --source >actual && + git log >expect && + test_cmp expect actual +' + test_done diff --git a/t/t4203-mailmap.sh b/t/t4203-mailmap.sh index 43b1522ea2..918ada69eb 100755 --- a/t/t4203-mailmap.sh +++ b/t/t4203-mailmap.sh @@ -442,6 +442,34 @@ test_expect_success 'Log output with log.mailmap' ' test_cmp expect actual ' +test_expect_success 'log.mailmap=false disables mailmap' ' + cat >expect <<-\EOF && + Author: CTO <cto@coompany.xx> + Author: claus <me@company.xx> + Author: santa <me@company.xx> + Author: nick2 <nick2@company.xx> + Author: nick2 <bugs@company.xx> + Author: nick1 <bugs@company.xx> + Author: A U Thor <author@example.com> + EOF + git -c log.mailmap=False log | grep Author > actual && + test_cmp expect actual +' + +test_expect_success '--no-use-mailmap disables mailmap' ' + cat >expect <<-\EOF && + Author: CTO <cto@coompany.xx> + Author: claus <me@company.xx> + Author: santa <me@company.xx> + Author: nick2 <nick2@company.xx> + Author: nick2 <bugs@company.xx> + Author: nick1 <bugs@company.xx> + Author: A U Thor <author@example.com> + EOF + git log --no-use-mailmap | grep Author > actual && + test_cmp expect actual +' + cat >expect <<\EOF Author: Santa Claus <santa.claus@northpole.xx> Author: Santa Claus <santa.claus@northpole.xx> @@ -461,6 +489,11 @@ test_expect_success 'Grep author with log.mailmap' ' test_cmp expect actual ' +test_expect_success 'log.mailmap is true by default these days' ' + git log --author Santa | grep Author >actual && + test_cmp expect actual +' + test_expect_success 'Only grep replaced author with --use-mailmap' ' git log --use-mailmap --author "<cto@coompany.xx>" >actual && test_must_be_empty actual diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index 7df8c3d4ec..f42a69faa2 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -578,6 +578,24 @@ test_expect_success '%(trailers:only) shows only "key: value" trailers' ' test_cmp expect actual ' +test_expect_success '%(trailers:only=yes) shows only "key: value" trailers' ' + git log --no-walk --pretty=format:"%(trailers:only=yes)" >actual && + grep -v patch.description <trailers >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:only=no) shows all trailers' ' + git log --no-walk --pretty=format:"%(trailers:only=no)" >actual && + cat trailers >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:only=no,only=true) shows only "key: value" trailers' ' + git log --no-walk --pretty=format:"%(trailers:only=yes)" >actual && + grep -v patch.description <trailers >expect && + test_cmp expect actual +' + test_expect_success '%(trailers:unfold) unfolds trailers' ' git log --no-walk --pretty="%(trailers:unfold)" >actual && { @@ -598,6 +616,105 @@ test_expect_success ':only and :unfold work together' ' test_cmp expect actual ' +test_expect_success 'pretty format %(trailers:key=foo) shows that trailer' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by)" >actual && + echo "Acked-by: A U Thor <author@example.com>" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:key=foo) is case insensitive' ' + git log --no-walk --pretty="format:%(trailers:key=AcKed-bY)" >actual && + echo "Acked-by: A U Thor <author@example.com>" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:key=foo:) trailing colon also works' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by:)" >actual && + echo "Acked-by: A U Thor <author@example.com>" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:key=foo) multiple keys' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by:,key=Signed-off-By)" >actual && + grep -v patch.description <trailers >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key=nonexistant) becomes empty' ' + git log --no-walk --pretty="x%(trailers:key=Nacked-by)x" >actual && + echo "xx" >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key=foo) handles multiple lines even if folded' ' + git log --no-walk --pretty="format:%(trailers:key=Signed-Off-by)" >actual && + grep -v patch.description <trailers | grep -v Acked-by >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key=foo,unfold) properly unfolds' ' + git log --no-walk --pretty="format:%(trailers:key=Signed-Off-by,unfold)" >actual && + unfold <trailers | grep Signed-off-by >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:key=foo,only=no) also includes nontrailer lines' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by,only=no)" >actual && + { + echo "Acked-by: A U Thor <author@example.com>" && + grep patch.description <trailers + } >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key) without value is error' ' + git log --no-walk --pretty="tformat:%(trailers:key)" >actual && + echo "%(trailers:key)" >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key=foo,valueonly) shows only value' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by,valueonly)" >actual && + echo "A U Thor <author@example.com>" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:separator) changes separator' ' + git log --no-walk --pretty=format:"X%(trailers:separator=%x00,unfold)X" >actual && + printf "XSigned-off-by: A U Thor <author@example.com>\0Acked-by: A U Thor <author@example.com>\0[ v2 updated patch description ]\0Signed-off-by: A U Thor <author@example.com>X" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers) combining separator/key/valueonly' ' + git commit --allow-empty -F - <<-\EOF && + Important fix + + The fix is explained here + + Closes: #1234 + EOF + + git commit --allow-empty -F - <<-\EOF && + Another fix + + The fix is explained here + + Closes: #567 + Closes: #890 + EOF + + git commit --allow-empty -F - <<-\EOF && + Does not close any tickets + EOF + + git log --pretty="%s% (trailers:separator=%x2c%x20,key=Closes,valueonly)" HEAD~3.. >actual && + test_write_lines \ + "Does not close any tickets" \ + "Another fix #567, #890" \ + "Important fix #1234" >expect && + test_cmp expect actual +' + test_expect_success 'trailer parsing not fooled by --- line' ' git commit --allow-empty -F - <<-\EOF && this is the subject diff --git a/t/t4211-line-log.sh b/t/t4211-line-log.sh index bd5fe4d148..8319163744 100755 --- a/t/t4211-line-log.sh +++ b/t/t4211-line-log.sh @@ -115,4 +115,103 @@ test_expect_success 'range_set_union' ' git log $(for x in $(test_seq 200); do echo -L $((2*x)),+1:c.c; done) ' +test_expect_success '-s shows only line-log commits' ' + git log --format="commit %s" -L1,24:b.c >expect.raw && + grep ^commit expect.raw >expect && + git log --format="commit %s" -L1,24:b.c -s >actual && + test_cmp expect actual +' + +test_expect_success '-p shows the default patch output' ' + git log -L1,24:b.c >expect && + git log -L1,24:b.c -p >actual && + test_cmp expect actual +' + +test_expect_success '--raw is forbidden' ' + test_must_fail git log -L1,24:b.c --raw +' + +test_expect_success 'setup for checking fancy rename following' ' + git checkout --orphan moves-start && + git reset --hard && + + printf "%s\n" 12 13 14 15 b c d e >file-1 && + printf "%s\n" 22 23 24 25 B C D E >file-2 && + git add file-1 file-2 && + test_tick && + git commit -m "Add file-1 and file-2" && + oid_add_f1_f2=$(git rev-parse --short HEAD) && + + git checkout -b moves-main && + printf "%s\n" 11 12 13 14 15 b c d e >file-1 && + git commit -a -m "Modify file-1 on main" && + oid_mod_f1_main=$(git rev-parse --short HEAD) && + + printf "%s\n" 21 22 23 24 25 B C D E >file-2 && + git commit -a -m "Modify file-2 on main #1" && + oid_mod_f2_main_1=$(git rev-parse --short HEAD) && + + git mv file-1 renamed-1 && + git commit -m "Rename file-1 to renamed-1 on main" && + + printf "%s\n" 11 12 13 14 15 b c d e f >renamed-1 && + git commit -a -m "Modify renamed-1 on main" && + oid_mod_r1_main=$(git rev-parse --short HEAD) && + + printf "%s\n" 21 22 23 24 25 B C D E F >file-2 && + git commit -a -m "Modify file-2 on main #2" && + oid_mod_f2_main_2=$(git rev-parse --short HEAD) && + + git checkout -b moves-side moves-start && + printf "%s\n" 12 13 14 15 16 b c d e >file-1 && + git commit -a -m "Modify file-1 on side #1" && + oid_mod_f1_side_1=$(git rev-parse --short HEAD) && + + printf "%s\n" 22 23 24 25 26 B C D E >file-2 && + git commit -a -m "Modify file-2 on side" && + oid_mod_f2_side=$(git rev-parse --short HEAD) && + + git mv file-2 renamed-2 && + git commit -m "Rename file-2 to renamed-2 on side" && + + printf "%s\n" 12 13 14 15 16 a b c d e >file-1 && + git commit -a -m "Modify file-1 on side #2" && + oid_mod_f1_side_2=$(git rev-parse --short HEAD) && + + printf "%s\n" 22 23 24 25 26 A B C D E >renamed-2 && + git commit -a -m "Modify renamed-2 on side" && + oid_mod_r2_side=$(git rev-parse --short HEAD) && + + git checkout moves-main && + git merge moves-side && + oid_merge=$(git rev-parse --short HEAD) +' + +test_expect_success 'fancy rename following #1' ' + cat >expect <<-EOF && + $oid_merge Merge branch '\''moves-side'\'' into moves-main + $oid_mod_f1_side_2 Modify file-1 on side #2 + $oid_mod_f1_side_1 Modify file-1 on side #1 + $oid_mod_r1_main Modify renamed-1 on main + $oid_mod_f1_main Modify file-1 on main + $oid_add_f1_f2 Add file-1 and file-2 + EOF + git log -L1:renamed-1 --oneline --no-patch >actual && + test_cmp expect actual +' + +test_expect_success 'fancy rename following #2' ' + cat >expect <<-EOF && + $oid_merge Merge branch '\''moves-side'\'' into moves-main + $oid_mod_r2_side Modify renamed-2 on side + $oid_mod_f2_side Modify file-2 on side + $oid_mod_f2_main_2 Modify file-2 on main #2 + $oid_mod_f2_main_1 Modify file-2 on main #1 + $oid_add_f1_f2 Add file-1 and file-2 + EOF + git log -L1:renamed-2 --oneline --no-patch >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4253-am-keep-cr-dos.sh b/t/t4253-am-keep-cr-dos.sh index 553fe3e88e..6e1b73ec3a 100755 --- a/t/t4253-am-keep-cr-dos.sh +++ b/t/t4253-am-keep-cr-dos.sh @@ -51,14 +51,16 @@ test_expect_success 'am with dos files without --keep-cr' ' test_expect_success 'am with dos files with --keep-cr' ' git checkout -b dosfiles-keep-cr initial && - git format-patch -k --stdout initial..master | git am --keep-cr -k -3 && + git format-patch -k --stdout initial..master >output && + git am --keep-cr -k -3 output && git diff --exit-code master ' test_expect_success 'am with dos files config am.keepcr' ' git config am.keepcr 1 && git checkout -b dosfiles-conf-keepcr initial && - git format-patch -k --stdout initial..master | git am -k -3 && + git format-patch -k --stdout initial..master >output && + git am -k -3 output && git diff --exit-code master ' diff --git a/t/t4257-am-interactive.sh b/t/t4257-am-interactive.sh new file mode 100755 index 0000000000..5344bd248a --- /dev/null +++ b/t/t4257-am-interactive.sh @@ -0,0 +1,52 @@ +#!/bin/sh + +test_description='am --interactive tests' +. ./test-lib.sh + +test_expect_success 'set up patches to apply' ' + test_commit unrelated && + test_commit no-conflict && + test_commit conflict-patch file patch && + git format-patch --stdout -2 >mbox && + + git reset --hard unrelated && + test_commit conflict-master file master base +' + +# Sanity check our setup. +test_expect_success 'applying all patches generates conflict' ' + test_must_fail git am mbox && + echo resolved >file && + git add -u && + git am --resolved +' + +test_expect_success 'interactive am can apply a single patch' ' + git reset --hard base && + # apply the first, but not the second + test_write_lines y n | git am -i mbox && + + echo no-conflict >expect && + git log -1 --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'interactive am can resolve conflict' ' + git reset --hard base && + # apply both; the second one will conflict + test_write_lines y y | test_must_fail git am -i mbox && + echo resolved >file && + git add -u && + # interactive "--resolved" will ask us if we want to apply the result + echo y | git am -i --resolved && + + echo conflict-patch >expect && + git log -1 --format=%s >actual && + test_cmp expect actual && + + echo resolved >expect && + git cat-file blob HEAD:file >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 602bfd9574..37655a237c 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -94,6 +94,13 @@ check_tar() { ' } +test_expect_success 'setup' ' + test_oid_cache <<-EOF + obj sha1:19f9c8273ec45a8938e6999cb59b3ff66739902a + obj sha256:3c666f798798601571f5cec0adb57ce4aba8546875e7693177e0535f34d2c49b + EOF +' + test_expect_success \ 'populate workdir' \ 'mkdir a && @@ -369,11 +376,10 @@ test_lazy_prereq TAR_HUGE ' ' test_expect_success LONG_IS_64BIT 'set up repository with huge blob' ' - obj_d=19 && - obj_f=f9c8273ec45a8938e6999cb59b3ff66739902a && - obj=${obj_d}${obj_f} && - mkdir -p .git/objects/$obj_d && - cp "$TEST_DIRECTORY"/t5000/$obj .git/objects/$obj_d/$obj_f && + obj=$(test_oid obj) && + path=$(test_oid_to_path $obj) && + mkdir -p .git/objects/$(dirname $path) && + cp "$TEST_DIRECTORY"/t5000/huge-object .git/objects/$path && rm -f .git/index && git update-index --add --cacheinfo 100644,$obj,huge && git commit -m huge diff --git a/t/t5000/19f9c8273ec45a8938e6999cb59b3ff66739902a b/t/t5000/huge-object Binary files differindex 5cbe9ec312..5cbe9ec312 100644 --- a/t/t5000/19f9c8273ec45a8938e6999cb59b3ff66739902a +++ b/t/t5000/huge-object diff --git a/t/t5004-archive-corner-cases.sh b/t/t5004-archive-corner-cases.sh index 271eb5a1fd..3e7b23cb32 100755 --- a/t/t5004-archive-corner-cases.sh +++ b/t/t5004-archive-corner-cases.sh @@ -204,4 +204,23 @@ test_expect_success EXPENSIVE,LONG_IS_64BIT,UNZIP,UNZIP_ZIP64_SUPPORT,ZIPINFO \ grep $size big.lst ' +build_tree() { + perl -e ' + my $hash = $ARGV[0]; + foreach my $order (2..6) { + $first = 10 ** $order; + foreach my $i (-13..-9) { + my $name = "a" x ($first + $i); + print "100644 blob $hash\t$name\n" + } + } + ' "$1" +} + +test_expect_success 'tar archive with long paths' ' + blob=$(echo foo | git hash-object -w --stdin) && + tree=$(build_tree $blob | git mktree) && + git archive -o long_paths.tar $tree +' + test_done diff --git a/t/t5150-request-pull.sh b/t/t5150-request-pull.sh index fca001eb9b..852dcd913f 100755 --- a/t/t5150-request-pull.sh +++ b/t/t5150-request-pull.sh @@ -246,4 +246,57 @@ test_expect_success 'request-pull ignores OPTIONS_KEEPDASHDASH poison' ' ' +test_expect_success 'request-pull quotes regex metacharacters properly' ' + + rm -fr downstream.git && + git init --bare downstream.git && + ( + cd local && + git checkout initial && + git merge --ff-only master && + git tag -mrelease v2.0 && + git push origin refs/tags/v2.0:refs/tags/v2-0 && + test_must_fail git request-pull initial "$downstream_url" tags/v2.0 \ + 2>../err + ) && + grep "No match for commit .*" err && + grep "Are you sure you pushed" err + +' + +test_expect_success 'pull request with mismatched object' ' + + rm -fr downstream.git && + git init --bare downstream.git && + ( + cd local && + git checkout initial && + git merge --ff-only master && + git push origin HEAD:refs/tags/full && + test_must_fail git request-pull initial "$downstream_url" tags/full \ + 2>../err + ) && + grep "points to a different object" err && + grep "Are you sure you pushed" err + +' + +test_expect_success 'pull request with stale object' ' + + rm -fr downstream.git && + git init --bare downstream.git && + ( + cd local && + git checkout initial && + git merge --ff-only master && + git push origin refs/tags/full && + git tag -f -m"Thirty-one days" full && + test_must_fail git request-pull initial "$downstream_url" tags/full \ + 2>../err + ) && + grep "points to a different object" err && + grep "Are you sure you pushed" err + +' + test_done diff --git a/t/t5200-update-server-info.sh b/t/t5200-update-server-info.sh new file mode 100755 index 0000000000..21a58eecb9 --- /dev/null +++ b/t/t5200-update-server-info.sh @@ -0,0 +1,41 @@ +#!/bin/sh + +test_description='Test git update-server-info' + +. ./test-lib.sh + +test_expect_success 'setup' 'test_commit file' + +test_expect_success 'create info/refs' ' + git update-server-info && + test_path_is_file .git/info/refs +' + +test_expect_success 'modify and store mtime' ' + test-tool chmtime =0 .git/info/refs && + test-tool chmtime --get .git/info/refs >a +' + +test_expect_success 'info/refs is not needlessly overwritten' ' + git update-server-info && + test-tool chmtime --get .git/info/refs >b && + test_cmp a b +' + +test_expect_success 'info/refs can be forced to update' ' + git update-server-info -f && + test-tool chmtime --get .git/info/refs >b && + ! test_cmp a b +' + +test_expect_success 'info/refs updates when changes are made' ' + test-tool chmtime =0 .git/info/refs && + test-tool chmtime --get .git/info/refs >b && + test_cmp a b && + git update-ref refs/heads/foo HEAD && + git update-server-info && + test-tool chmtime --get .git/info/refs >b && + ! test_cmp a b +' + +test_done diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index 270da21ac3..df60f18fb8 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -118,10 +118,10 @@ test_expect_success 'prune: do not prune detached HEAD with no reflog' ' test_expect_success 'prune: prune former HEAD after checking out branch' ' - head_sha1=$(git rev-parse HEAD) && + head_oid=$(git rev-parse HEAD) && git checkout --quiet master && git prune -v >prune_actual && - grep "$head_sha1" prune_actual + grep "$head_oid" prune_actual ' @@ -265,15 +265,27 @@ EOF ' test_expect_success 'prune .git/shallow' ' - SHA1=$(echo hi|git commit-tree HEAD^{tree}) && - echo $SHA1 >.git/shallow && + oid=$(echo hi|git commit-tree HEAD^{tree}) && + echo $oid >.git/shallow && git prune --dry-run >out && - grep $SHA1 .git/shallow && - grep $SHA1 out && + grep $oid .git/shallow && + grep $oid out && git prune && test_path_is_missing .git/shallow ' +test_expect_success 'prune .git/shallow when there are no loose objects' ' + oid=$(echo hi|git commit-tree HEAD^{tree}) && + echo $oid >.git/shallow && + git update-ref refs/heads/shallow-tip $oid && + git repack -ad && + # verify assumption that all loose objects are gone + git count-objects | grep ^0 && + git prune && + echo $oid >expect && + test_cmp expect .git/shallow +' + test_expect_success 'prune: handle alternate object database' ' test_create_repo A && git -C A commit --allow-empty -m "initial commit" && @@ -314,8 +326,8 @@ test_expect_success 'prune: handle HEAD reflog in multiple worktrees' ' git reset --hard HEAD^ ) && git prune --expire=now && - SHA1=`git hash-object expected` && - git -C third-worktree show "$SHA1" >actual && + oid=`git hash-object expected` && + git -C third-worktree show "$oid" >actual && test_cmp expected actual ' @@ -329,4 +341,12 @@ test_expect_success 'prune: handle expire option correctly' ' git prune --no-expire ' +test_expect_success 'trivial prune with bitmaps enabled' ' + git repack -adb && + blob=$(echo bitmap-unreachable-blob | git hash-object -w --stdin) && + git prune --expire=now && + git cat-file -e HEAD && + test_must_fail git cat-file -e $blob +' + test_done diff --git a/t/t5307-pack-missing-commit.sh b/t/t5307-pack-missing-commit.sh index dacb440b27..f4338abb78 100755 --- a/t/t5307-pack-missing-commit.sh +++ b/t/t5307-pack-missing-commit.sh @@ -24,11 +24,11 @@ test_expect_success 'check corruption' ' ' test_expect_success 'rev-list notices corruption (1)' ' - test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git rev-list HEAD + test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git -c core.commitGraph=false rev-list HEAD ' test_expect_success 'rev-list notices corruption (2)' ' - test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git rev-list --objects HEAD + test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git -c core.commitGraph=false rev-list --objects HEAD ' test_expect_success 'pack-objects notices corruption' ' diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index 82d7f7f6a5..6640329ebf 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -21,21 +21,14 @@ has_any () { } test_expect_success 'setup repo with moderate-sized history' ' - for i in $(test_seq 1 10) - do - test_commit $i - done && + test_commit_bulk --id=file 100 && git checkout -b other HEAD~5 && - for i in $(test_seq 1 10) - do - test_commit side-$i - done && + test_commit_bulk --id=side 10 && git checkout master && bitmaptip=$(git rev-parse master) && blob=$(echo tagged-blob | git hash-object -w --stdin) && git tag tagged-blob $blob && - git config repack.writebitmaps true && - git config pack.writebitmaphashcache true + git config repack.writebitmaps true ' test_expect_success 'full repack creates bitmaps' ' @@ -107,10 +100,7 @@ test_expect_success 'clone from bitmapped repository' ' ' test_expect_success 'setup further non-bitmapped commits' ' - for i in $(test_seq 1 10) - do - test_commit further-$i - done + test_commit_bulk --id=further 10 ' rev_list_tests 'partial bitmap' @@ -269,7 +259,7 @@ test_expect_success JGIT 'we can read jgit bitmaps' ' git clone --bare . compat-jgit.git && ( cd compat-jgit.git && - rm -f .git/objects/pack/*.bitmap && + rm -f objects/pack/*.bitmap && jgit gc && git rev-list --test-bitmap HEAD ) diff --git a/t/t5317-pack-objects-filter-objects.sh b/t/t5317-pack-objects-filter-objects.sh index 24541ea137..2d2f5d0229 100755 --- a/t/t5317-pack-objects-filter-objects.sh +++ b/t/t5317-pack-objects-filter-objects.sh @@ -25,7 +25,7 @@ test_expect_success 'verify blob count in normal packfile' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r1 pack-objects --rev --stdout >all.pack <<-EOF && + git -C r1 pack-objects --revs --stdout >all.pack <<-EOF && HEAD EOF git -C r1 index-pack ../all.pack && @@ -39,7 +39,7 @@ test_expect_success 'verify blob count in normal packfile' ' ' test_expect_success 'verify blob:none packfile has no blobs' ' - git -C r1 pack-objects --rev --stdout --filter=blob:none >filter.pack <<-EOF && + git -C r1 pack-objects --revs --stdout --filter=blob:none >filter.pack <<-EOF && HEAD EOF git -C r1 index-pack ../filter.pack && @@ -74,7 +74,7 @@ test_expect_success 'get an error for missing tree object' ' git -C r5 commit -m "foo" && del=$(git -C r5 rev-parse HEAD^{tree} | sed "s|..|&/|") && rm r5/.git/objects/$del && - test_must_fail git -C r5 pack-objects --rev --stdout 2>bad_tree <<-EOF && + test_must_fail git -C r5 pack-objects --revs --stdout 2>bad_tree <<-EOF && HEAD EOF grep "bad tree object" bad_tree @@ -88,7 +88,7 @@ test_expect_success 'setup for tests of tree:0' ' ' test_expect_success 'verify tree:0 packfile has no blobs or trees' ' - git -C r1 pack-objects --rev --stdout --filter=tree:0 >commitsonly.pack <<-EOF && + git -C r1 pack-objects --revs --stdout --filter=tree:0 >commitsonly.pack <<-EOF && HEAD EOF git -C r1 index-pack ../commitsonly.pack && @@ -98,7 +98,7 @@ test_expect_success 'verify tree:0 packfile has no blobs or trees' ' test_expect_success 'grab tree directly when using tree:0' ' # We should get the tree specified directly but not its blobs or subtrees. - git -C r1 pack-objects --rev --stdout --filter=tree:0 >commitsonly.pack <<-EOF && + git -C r1 pack-objects --revs --stdout --filter=tree:0 >commitsonly.pack <<-EOF && HEAD: EOF git -C r1 index-pack ../commitsonly.pack && @@ -128,7 +128,7 @@ test_expect_success 'verify blob count in normal packfile' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout >all.pack <<-EOF && + git -C r2 pack-objects --revs --stdout >all.pack <<-EOF && HEAD EOF git -C r2 index-pack ../all.pack && @@ -142,7 +142,7 @@ test_expect_success 'verify blob count in normal packfile' ' ' test_expect_success 'verify blob:limit=500 omits all blobs' ' - git -C r2 pack-objects --rev --stdout --filter=blob:limit=500 >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=500 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -157,7 +157,7 @@ test_expect_success 'verify blob:limit=500 omits all blobs' ' ' test_expect_success 'verify blob:limit=1000' ' - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1000 >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1000 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -176,7 +176,7 @@ test_expect_success 'verify blob:limit=1001' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1001 >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1001 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -194,7 +194,7 @@ test_expect_success 'verify blob:limit=10001' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=10001 >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=10001 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -212,7 +212,7 @@ test_expect_success 'verify blob:limit=1k' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1k >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1k >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -230,7 +230,7 @@ test_expect_success 'verify explicitly specifying oversized blob in input' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1k >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1k >filter.pack <<-EOF && HEAD $(git -C r2 rev-parse HEAD:large.10000) EOF @@ -249,7 +249,7 @@ test_expect_success 'verify blob:limit=1m' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1m >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1m >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -277,6 +277,10 @@ test_expect_success 'verify normal and blob:limit packfiles have same commits/tr ' # Test sparse:path=<path> filter. +# !!!! +# NOTE: sparse:path filter support has been dropped for security reasons, +# so the tests have been changed to make sure that using it fails. +# !!!! # Use a local file containing a sparse-checkout specification to filter # out blobs not required for the corresponding sparse-checkout. We do not # require sparse-checkout to actually be enabled. @@ -302,7 +306,7 @@ test_expect_success 'verify blob count in normal packfile' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r3 pack-objects --rev --stdout >all.pack <<-EOF && + git -C r3 pack-objects --revs --stdout >all.pack <<-EOF && HEAD EOF git -C r3 index-pack ../all.pack && @@ -315,73 +319,24 @@ test_expect_success 'verify blob count in normal packfile' ' test_cmp expected observed ' -test_expect_success 'verify sparse:path=pattern1' ' - git -C r3 ls-files -s dir1/sparse1 dir1/sparse2 >ls_files_result && - awk -f print_2.awk ls_files_result | - sort >expected && - - git -C r3 pack-objects --rev --stdout --filter=sparse:path=../pattern1 >filter.pack <<-EOF && +test_expect_success 'verify sparse:path=pattern1 fails' ' + test_must_fail git -C r3 pack-objects --revs --stdout \ + --filter=sparse:path=../pattern1 <<-EOF HEAD EOF - git -C r3 index-pack ../filter.pack && - - git -C r3 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - test_cmp expected observed -' - -test_expect_success 'verify normal and sparse:path=pattern1 packfiles have same commits/trees' ' - git -C r3 verify-pack -v ../all.pack >verify_result && - grep -E "commit|tree" verify_result | - awk -f print_1.awk | - sort >expected && - - git -C r3 verify-pack -v ../filter.pack >verify_result && - grep -E "commit|tree" verify_result | - awk -f print_1.awk | - sort >observed && - - test_cmp expected observed ' -test_expect_success 'verify sparse:path=pattern2' ' - git -C r3 ls-files -s sparse1 dir1/sparse1 >ls_files_result && - awk -f print_2.awk ls_files_result | - sort >expected && - - git -C r3 pack-objects --rev --stdout --filter=sparse:path=../pattern2 >filter.pack <<-EOF && +test_expect_success 'verify sparse:path=pattern2 fails' ' + test_must_fail git -C r3 pack-objects --revs --stdout \ + --filter=sparse:path=../pattern2 <<-EOF HEAD EOF - git -C r3 index-pack ../filter.pack && - - git -C r3 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - test_cmp expected observed -' - -test_expect_success 'verify normal and sparse:path=pattern2 packfiles have same commits/trees' ' - git -C r3 verify-pack -v ../all.pack >verify_result && - grep -E "commit|tree" verify_result | - awk -f print_1.awk | - sort >expected && - - git -C r3 verify-pack -v ../filter.pack >verify_result && - grep -E "commit|tree" verify_result | - awk -f print_1.awk | - sort >observed && - - test_cmp expected observed ' # Test sparse:oid=<oid-ish> filter. -# Like sparse:path, but we get the sparse-checkout specification from -# a blob rather than a file on disk. +# Use a blob containing a sparse-checkout specification to filter +# out blobs not required for the corresponding sparse-checkout. We do not +# require sparse-checkout to actually be enabled. test_expect_success 'setup r4' ' git init r4 && @@ -404,7 +359,7 @@ test_expect_success 'verify blob count in normal packfile' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r4 pack-objects --rev --stdout >all.pack <<-EOF && + git -C r4 pack-objects --revs --stdout >all.pack <<-EOF && HEAD EOF git -C r4 index-pack ../all.pack && @@ -423,7 +378,7 @@ test_expect_success 'verify sparse:oid=OID' ' sort >expected && oid=$(git -C r4 ls-files -s pattern | awk -f print_2.awk) && - git -C r4 pack-objects --rev --stdout --filter=sparse:oid=$oid >filter.pack <<-EOF && + git -C r4 pack-objects --revs --stdout --filter=sparse:oid=$oid >filter.pack <<-EOF && HEAD EOF git -C r4 index-pack ../filter.pack && @@ -441,7 +396,7 @@ test_expect_success 'verify sparse:oid=oid-ish' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r4 pack-objects --rev --stdout --filter=sparse:oid=master:pattern >filter.pack <<-EOF && + git -C r4 pack-objects --revs --stdout --filter=sparse:oid=master:pattern >filter.pack <<-EOF && HEAD EOF git -C r4 index-pack ../filter.pack && @@ -470,19 +425,19 @@ test_expect_success 'setup r1 - delete loose blobs' ' ' test_expect_success 'verify pack-objects fails w/ missing objects' ' - test_must_fail git -C r1 pack-objects --rev --stdout >miss.pack <<-EOF + test_must_fail git -C r1 pack-objects --revs --stdout >miss.pack <<-EOF HEAD EOF ' test_expect_success 'verify pack-objects fails w/ --missing=error' ' - test_must_fail git -C r1 pack-objects --rev --stdout --missing=error >miss.pack <<-EOF + test_must_fail git -C r1 pack-objects --revs --stdout --missing=error >miss.pack <<-EOF HEAD EOF ' test_expect_success 'verify pack-objects w/ --missing=allow-any' ' - git -C r1 pack-objects --rev --stdout --missing=allow-any >miss.pack <<-EOF + git -C r1 pack-objects --revs --stdout --missing=allow-any >miss.pack <<-EOF HEAD EOF ' diff --git a/t/t5318-commit-graph.sh b/t/t5318-commit-graph.sh index 16d10ebce8..ab3eccf0fa 100755 --- a/t/t5318-commit-graph.sh +++ b/t/t5318-commit-graph.sh @@ -20,7 +20,14 @@ test_expect_success 'verify graph with no graph file' ' test_expect_success 'write graph with no packs' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write --object-dir . && - test_path_is_file info/commit-graph + test_path_is_missing info/commit-graph +' + +test_expect_success 'exit with correct error on bad input to --stdin-packs' ' + cd "$TRASH_DIRECTORY/full" && + echo doesnotexist >in && + test_expect_code 1 git commit-graph write --stdin-packs <in 2>stderr && + test_i18ngrep "error adding pack" stderr ' test_expect_success 'create commits and repack' ' @@ -33,6 +40,15 @@ test_expect_success 'create commits and repack' ' git repack ' +test_expect_success 'exit with correct error on bad input to --stdin-commits' ' + cd "$TRASH_DIRECTORY/full" && + echo HEAD | test_expect_code 1 git commit-graph write --stdin-commits 2>stderr && + test_i18ngrep "invalid commit object id" stderr && + # valid tree OID, but not a commit OID + git rev-parse HEAD^{tree} | test_expect_code 1 git commit-graph write --stdin-commits 2>stderr && + test_i18ngrep "invalid commit object id" stderr +' + graph_git_two_modes() { git -c core.commitGraph=true $1 >output git -c core.commitGraph=false $1 >expect @@ -75,7 +91,7 @@ graph_read_expect() { test_expect_success 'write graph' ' cd "$TRASH_DIRECTORY/full" && - graph1=$(git commit-graph write) && + git commit-graph write && test_path_is_file $objdir/info/commit-graph && graph_read_expect "3" ' @@ -366,6 +382,26 @@ GRAPH_OCTOPUS_DATA_OFFSET=$(($GRAPH_COMMIT_DATA_OFFSET + \ GRAPH_BYTE_OCTOPUS=$(($GRAPH_OCTOPUS_DATA_OFFSET + 4)) GRAPH_BYTE_FOOTER=$(($GRAPH_OCTOPUS_DATA_OFFSET + 4 * $NUM_OCTOPUS_EDGES)) +corrupt_graph_setup() { + cd "$TRASH_DIRECTORY/full" && + test_when_finished mv commit-graph-backup $objdir/info/commit-graph && + cp $objdir/info/commit-graph commit-graph-backup +} + +corrupt_graph_verify() { + grepstr=$1 + test_must_fail git commit-graph verify 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "$grepstr" err && + if test "$2" != "no-copy" + then + cp $objdir/info/commit-graph commit-graph-pre-write-test + fi && + git status --short && + GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD=true git commit-graph write && + git commit-graph verify +} + # usage: corrupt_graph_and_verify <position> <data> <string> [<zero_pos>] # Manipulates the commit-graph file at the position # by inserting the data, optionally zeroing the file @@ -376,19 +412,28 @@ corrupt_graph_and_verify() { pos=$1 data="${2:-\0}" grepstr=$3 - cd "$TRASH_DIRECTORY/full" && + corrupt_graph_setup && orig_size=$(wc -c < $objdir/info/commit-graph) && zero_pos=${4:-${orig_size}} && - test_when_finished mv commit-graph-backup $objdir/info/commit-graph && - cp $objdir/info/commit-graph commit-graph-backup && printf "$data" | dd of="$objdir/info/commit-graph" bs=1 seek="$pos" conv=notrunc && - dd of="$objdir/info/commit-graph" bs=1 seek="$zero_pos" count=0 && - dd if=/dev/zero of="$objdir/info/commit-graph" bs=1 seek="$zero_pos" count=$(($orig_size - $zero_pos)) && - test_must_fail git commit-graph verify 2>test_err && - grep -v "^+" test_err >err && - test_i18ngrep "$grepstr" err + dd of="$objdir/info/commit-graph" bs=1 seek="$zero_pos" if=/dev/null && + generate_zero_bytes $(($orig_size - $zero_pos)) >>"$objdir/info/commit-graph" && + corrupt_graph_verify "$grepstr" + } +test_expect_success POSIXPERM,SANITY 'detect permission problem' ' + corrupt_graph_setup && + chmod 000 $objdir/info/commit-graph && + corrupt_graph_verify "Could not open" "no-copy" +' + +test_expect_success 'detect too small' ' + corrupt_graph_setup && + echo "a small graph" >$objdir/info/commit-graph && + corrupt_graph_verify "too small" +' + test_expect_success 'detect bad signature' ' corrupt_graph_and_verify 0 "\0" \ "graph signature" @@ -499,6 +544,7 @@ test_expect_success 'git fsck (checks commit-graph)' ' git fsck && corrupt_graph_and_verify $GRAPH_BYTE_FOOTER "\00" \ "incorrect checksum" && + cp commit-graph-pre-write-test $objdir/info/commit-graph && test_must_fail git fsck ' diff --git a/t/t5319-multi-pack-index.sh b/t/t5319-multi-pack-index.sh index 70926b5bc0..c72ca04399 100755 --- a/t/t5319-multi-pack-index.sh +++ b/t/t5319-multi-pack-index.sh @@ -86,13 +86,14 @@ test_expect_success 'write midx with one v1 pack' ' ' midx_git_two_modes () { + git -c core.multiPackIndex=false $1 >expect && + git -c core.multiPackIndex=true $1 >actual && if [ "$2" = "sorted" ] then - git -c core.multiPackIndex=false $1 | sort >expect && - git -c core.multiPackIndex=true $1 | sort >actual - else - git -c core.multiPackIndex=false $1 >expect && - git -c core.multiPackIndex=true $1 >actual + sort <expect >expect.sorted && + mv expect.sorted expect && + sort <actual >actual.sorted && + mv actual.sorted actual fi && test_cmp expect actual } @@ -103,8 +104,8 @@ compare_results_with_midx () { midx_git_two_modes "rev-list --objects --all" && midx_git_two_modes "log --raw" && midx_git_two_modes "count-objects --verbose" && - midx_git_two_modes "cat-file --batch-all-objects --buffer --batch-check" && - midx_git_two_modes "cat-file --batch-all-objects --buffer --batch-check --unsorted" sorted + midx_git_two_modes "cat-file --batch-all-objects --batch-check" && + midx_git_two_modes "cat-file --batch-all-objects --batch-check --unordered" sorted ' } @@ -116,6 +117,20 @@ test_expect_success 'write midx with one v2 pack' ' compare_results_with_midx "one v2 pack" +test_expect_success 'corrupt idx not opened' ' + idx=$(test-tool read-midx $objdir | grep "\.idx\$") && + mv $objdir/pack/$idx backup-$idx && + test_when_finished "mv backup-\$idx \$objdir/pack/\$idx" && + + # This is the minimum size for a sha-1 based .idx; this lets + # us pass perfunctory tests, but anything that actually opens and reads + # the idx file will complain. + test_copy_bytes 1064 <backup-$idx >$objdir/pack/$idx && + + git -c core.multiPackIndex=true rev-list --objects --all 2>err && + test_must_be_empty err +' + test_expect_success 'add more objects' ' for i in $(test_seq 6 10) do @@ -348,4 +363,188 @@ test_expect_success 'verify incorrect 64-bit offset' ' "incorrect object offset" ' +test_expect_success 'setup expire tests' ' + mkdir dup && + ( + cd dup && + git init && + test-tool genrandom "data" 4096 >large_file.txt && + git update-index --add large_file.txt && + for i in $(test_seq 1 20) + do + test_commit $i + done && + git branch A HEAD && + git branch B HEAD~8 && + git branch C HEAD~13 && + git branch D HEAD~16 && + git branch E HEAD~18 && + git pack-objects --revs .git/objects/pack/pack-A <<-EOF && + refs/heads/A + ^refs/heads/B + EOF + git pack-objects --revs .git/objects/pack/pack-B <<-EOF && + refs/heads/B + ^refs/heads/C + EOF + git pack-objects --revs .git/objects/pack/pack-C <<-EOF && + refs/heads/C + ^refs/heads/D + EOF + git pack-objects --revs .git/objects/pack/pack-D <<-EOF && + refs/heads/D + ^refs/heads/E + EOF + git pack-objects --revs .git/objects/pack/pack-E <<-EOF && + refs/heads/E + EOF + git multi-pack-index write && + cp -r .git/objects/pack .git/objects/pack-backup + ) +' + +test_expect_success 'expire does not remove any packs' ' + ( + cd dup && + ls .git/objects/pack >expect && + git multi-pack-index expire && + ls .git/objects/pack >actual && + test_cmp expect actual + ) +' + +test_expect_success 'expire removes unreferenced packs' ' + ( + cd dup && + git pack-objects --revs .git/objects/pack/pack-combined <<-EOF && + refs/heads/A + ^refs/heads/C + EOF + git multi-pack-index write && + ls .git/objects/pack | grep -v -e pack-[AB] >expect && + git multi-pack-index expire && + ls .git/objects/pack >actual && + test_cmp expect actual && + ls .git/objects/pack/ | grep idx >expect-idx && + test-tool read-midx .git/objects | grep idx >actual-midx && + test_cmp expect-idx actual-midx && + git multi-pack-index verify && + git fsck + ) +' + +test_expect_success 'repack with minimum size does not alter existing packs' ' + ( + cd dup && + rm -rf .git/objects/pack && + mv .git/objects/pack-backup .git/objects/pack && + touch -m -t 201901010000 .git/objects/pack/pack-D* && + touch -m -t 201901010001 .git/objects/pack/pack-C* && + touch -m -t 201901010002 .git/objects/pack/pack-B* && + touch -m -t 201901010003 .git/objects/pack/pack-A* && + ls .git/objects/pack >expect && + MINSIZE=$(test-tool path-utils file-size .git/objects/pack/*pack | sort -n | head -n 1) && + git multi-pack-index repack --batch-size=$MINSIZE && + ls .git/objects/pack >actual && + test_cmp expect actual + ) +' + +test_expect_success 'repack creates a new pack' ' + ( + cd dup && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 5 idx-list && + THIRD_SMALLEST_SIZE=$(test-tool path-utils file-size .git/objects/pack/*pack | sort -n | head -n 3 | tail -n 1) && + BATCH_SIZE=$(($THIRD_SMALLEST_SIZE + 1)) && + git multi-pack-index repack --batch-size=$BATCH_SIZE && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 6 idx-list && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 6 midx-list + ) +' + +test_expect_success 'expire removes repacked packs' ' + ( + cd dup && + ls -al .git/objects/pack/*pack && + ls -S .git/objects/pack/*pack | head -n 4 >expect && + git multi-pack-index expire && + ls -S .git/objects/pack/*pack >actual && + test_cmp expect actual && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 4 midx-list + ) +' + +test_expect_success 'expire works when adding new packs' ' + ( + cd dup && + git pack-objects --revs .git/objects/pack/pack-combined <<-EOF && + refs/heads/A + ^refs/heads/B + EOF + git pack-objects --revs .git/objects/pack/pack-combined <<-EOF && + refs/heads/B + ^refs/heads/C + EOF + git pack-objects --revs .git/objects/pack/pack-combined <<-EOF && + refs/heads/C + ^refs/heads/D + EOF + git multi-pack-index write && + git pack-objects --revs .git/objects/pack/a-pack <<-EOF && + refs/heads/D + ^refs/heads/E + EOF + git multi-pack-index write && + git pack-objects --revs .git/objects/pack/z-pack <<-EOF && + refs/heads/E + EOF + git multi-pack-index expire && + ls .git/objects/pack/ | grep idx >expect && + test-tool read-midx .git/objects | grep idx >actual && + test_cmp expect actual && + git multi-pack-index verify + ) +' + +test_expect_success 'expire respects .keep files' ' + ( + cd dup && + git pack-objects --revs .git/objects/pack/pack-all <<-EOF && + refs/heads/A + EOF + git multi-pack-index write && + PACKA=$(ls .git/objects/pack/a-pack*\.pack | sed s/\.pack\$//) && + touch $PACKA.keep && + git multi-pack-index expire && + ls -S .git/objects/pack/a-pack* | grep $PACKA >a-pack-files && + test_line_count = 3 a-pack-files && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 2 midx-list + ) +' + +test_expect_success 'repack --batch-size=0 repacks everything' ' + ( + cd dup && + rm .git/objects/pack/*.keep && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 2 idx-list && + git multi-pack-index repack --batch-size=0 && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 3 idx-list && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 3 midx-list && + git multi-pack-index expire && + ls -al .git/objects/pack/*idx >idx-list && + test_line_count = 1 idx-list && + git multi-pack-index repack --batch-size=0 && + ls -al .git/objects/pack/*idx >new-idx-list && + test_cmp idx-list new-idx-list + ) +' + test_done diff --git a/t/t5323-pack-redundant.sh b/t/t5323-pack-redundant.sh new file mode 100755 index 0000000000..6b4d1ca353 --- /dev/null +++ b/t/t5323-pack-redundant.sh @@ -0,0 +1,467 @@ +#!/bin/sh +# +# Copyright (c) 2018 Jiang Xin +# + +test_description='Test git pack-redundant + +In order to test git-pack-redundant, we will create a number of objects and +packs in the repository `master.git`. The relationship between packs (P1-P8) +and objects (T, A-R) is showed in the following chart. Objects of a pack will +be marked with letter x, while objects of redundant packs will be marked with +exclamation point, and redundant pack itself will be marked with asterisk. + + | T A B C D E F G H I J K L M N O P Q R + ----+-------------------------------------- + P1 | x x x x x x x x + P2* | ! ! ! ! ! ! ! + P3 | x x x x x x + P4* | ! ! ! ! ! + P5 | x x x x + P6* | ! ! ! + P7 | x x + P8* | ! + ----+-------------------------------------- + ALL | x x x x x x x x x x x x x x x x x x x + +Another repository `shared.git` has unique objects (X-Z), while other objects +(marked with letter s) are shared through alt-odb (of `master.git`). The +relationship between packs and objects is as follows: + + | T A B C D E F G H I J K L M N O P Q R X Y Z + ----+---------------------------------------------- + Px1 | s s s x x x + Px2 | s s s x x x +' + +. ./test-lib.sh + +master_repo=master.git +shared_repo=shared.git + +# Create commits in <repo> and assign each commit's oid to shell variables +# given in the arguments (A, B, and C). E.g.: +# +# create_commits_in <repo> A B C +# +# NOTE: Avoid calling this function from a subshell since variable +# assignments will disappear when subshell exits. +create_commits_in () { + repo="$1" && + if ! parent=$(git -C "$repo" rev-parse HEAD^{} 2>/dev/null) + then + parent= + fi && + T=$(git -C "$repo" write-tree) && + shift && + while test $# -gt 0 + do + name=$1 && + test_tick && + if test -z "$parent" + then + oid=$(echo $name | git -C "$repo" commit-tree $T) + else + oid=$(echo $name | git -C "$repo" commit-tree -p $parent $T) + fi && + eval $name=$oid && + parent=$oid && + shift || + return 1 + done && + git -C "$repo" update-ref refs/heads/master $oid +} + +# Create pack in <repo> and assign pack id to variable given in the 2nd argument +# (<name>). Commits in the pack will be read from stdin. E.g.: +# +# create_pack_in <repo> <name> <<-EOF +# ... +# EOF +# +# NOTE: commits from stdin should be given using heredoc, not using pipe, and +# avoid calling this function from a subshell since variable assignments will +# disappear when subshell exits. +create_pack_in () { + repo="$1" && + name="$2" && + pack=$(git -C "$repo/objects/pack" pack-objects -q pack) && + eval $name=$pack && + eval P$pack=$name:$pack +} + +format_packfiles () { + sed \ + -e "s#.*/pack-\(.*\)\.idx#\1#" \ + -e "s#.*/pack-\(.*\)\.pack#\1#" | + sort -u | + while read p + do + if test -z "$(eval echo \${P$p})" + then + echo $p + else + eval echo "\${P$p}" + fi + done | + sort +} + +test_expect_success 'setup master repo' ' + git init --bare "$master_repo" && + create_commits_in "$master_repo" A B C D E F G H I J K L M N O P Q R +' + +############################################################################# +# Chart of packs and objects for this test case +# +# | T A B C D E F G H I J K L M N O P Q R +# ----+-------------------------------------- +# P1 | x x x x x x x x +# P2 | x x x x x x x +# P3 | x x x x x x +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'master: no redundant for pack 1, 2, 3' ' + create_pack_in "$master_repo" P1 <<-EOF && + $T + $A + $B + $C + $D + $E + $F + $R + EOF + create_pack_in "$master_repo" P2 <<-EOF && + $B + $C + $D + $E + $G + $H + $I + EOF + create_pack_in "$master_repo" P3 <<-EOF && + $F + $I + $J + $K + $L + $M + EOF + ( + cd "$master_repo" && + git pack-redundant --all >out && + test_must_be_empty out + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# | T A B C D E F G H I J K L M N O P Q R +# ----+-------------------------------------- +# P1 | x x x x x x x x +# P2 | x x x x x x x +# P3* | ! ! ! ! ! ! +# P4 | x x x x x +# P5 | x x x x +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'master: one of pack-2/pack-3 is redundant' ' + create_pack_in "$master_repo" P4 <<-EOF && + $J + $K + $L + $M + $P + EOF + create_pack_in "$master_repo" P5 <<-EOF && + $G + $H + $N + $O + EOF + ( + cd "$master_repo" && + cat >expect <<-EOF && + P3:$P3 + EOF + git pack-redundant --all >out && + format_packfiles <out >actual && + test_cmp expect actual + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# | T A B C D E F G H I J K L M N O P Q R +# ----+-------------------------------------- +# P1 | x x x x x x x x +# P2* | ! ! ! ! ! ! ! +# P3 | x x x x x x +# P4* | ! ! ! ! ! +# P5 | x x x x +# P6* | ! ! ! +# P7 | x x +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'master: pack 2, 4, and 6 are redundant' ' + create_pack_in "$master_repo" P6 <<-EOF && + $N + $O + $Q + EOF + create_pack_in "$master_repo" P7 <<-EOF && + $P + $Q + EOF + ( + cd "$master_repo" && + cat >expect <<-EOF && + P2:$P2 + P4:$P4 + P6:$P6 + EOF + git pack-redundant --all >out && + format_packfiles <out >actual && + test_cmp expect actual + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# | T A B C D E F G H I J K L M N O P Q R +# ----+-------------------------------------- +# P1 | x x x x x x x x +# P2* | ! ! ! ! ! ! ! +# P3 | x x x x x x +# P4* | ! ! ! ! ! +# P5 | x x x x +# P6* | ! ! ! +# P7 | x x +# P8* | ! +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'master: pack-8 (subset of pack-1) is also redundant' ' + create_pack_in "$master_repo" P8 <<-EOF && + $A + EOF + ( + cd "$master_repo" && + cat >expect <<-EOF && + P2:$P2 + P4:$P4 + P6:$P6 + P8:$P8 + EOF + git pack-redundant --all >out && + format_packfiles <out >actual && + test_cmp expect actual + ) +' + +test_expect_success 'master: clean loose objects' ' + ( + cd "$master_repo" && + git prune-packed && + find objects -type f | sed -e "/objects\/pack\//d" >out && + test_must_be_empty out + ) +' + +test_expect_success 'master: remove redundant packs and pass fsck' ' + ( + cd "$master_repo" && + git pack-redundant --all | xargs rm && + git fsck && + git pack-redundant --all >out && + test_must_be_empty out + ) +' + +# The following test cases will execute inside `shared.git`, instead of +# inside `master.git`. +test_expect_success 'setup shared.git' ' + git clone --mirror "$master_repo" "$shared_repo" && + ( + cd "$shared_repo" && + printf "../../$master_repo/objects\n" >objects/info/alternates + ) +' + +test_expect_success 'shared: all packs are redundant, but no output without --alt-odb' ' + ( + cd "$shared_repo" && + git pack-redundant --all >out && + test_must_be_empty out + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# ================ master.git =============== +# | T A B C D E F G H I J K L M N O P Q R <----------+ +# ----+-------------------------------------- | +# P1 | x x x x x x x x | +# P3 | x x x x x x | +# P5 | x x x x | +# P7 | x x | +# ----+-------------------------------------- | +# ALL | x x x x x x x x x x x x x x x x x x x | +# | +# | +# ================ shared.git =============== | +# | T A B C D E F G H I J K L M N O P Q R <objects/info/alternates> +# ----+-------------------------------------- +# P1* | s s s s s s s s +# P3* | s s s s s s +# P5* | s s s s +# P7* | s s +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'shared: show redundant packs in stderr for verbose mode' ' + ( + cd "$shared_repo" && + cat >expect <<-EOF && + P1:$P1 + P3:$P3 + P5:$P5 + P7:$P7 + EOF + git pack-redundant --all --verbose >out 2>out.err && + test_must_be_empty out && + grep "pack$" out.err | format_packfiles >actual && + test_cmp expect actual + ) +' + +test_expect_success 'shared: remove redundant packs, no packs left' ' + ( + cd "$shared_repo" && + cat >expect <<-EOF && + fatal: Zero packs found! + EOF + git pack-redundant --all --alt-odb | xargs rm && + git fsck && + test_must_fail git pack-redundant --all --alt-odb >actual 2>&1 && + test_cmp expect actual + ) +' + +test_expect_success 'shared: create new objects and packs' ' + create_commits_in "$shared_repo" X Y Z && + create_pack_in "$shared_repo" Px1 <<-EOF && + $X + $Y + $Z + $A + $B + $C + EOF + create_pack_in "$shared_repo" Px2 <<-EOF + $X + $Y + $Z + $D + $E + $F + EOF +' + +test_expect_success 'shared: no redundant without --alt-odb' ' + ( + cd "$shared_repo" && + git pack-redundant --all >out && + test_must_be_empty out + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# ================ master.git =============== +# | T A B C D E F G H I J K L M N O P Q R <----------------+ +# ----+-------------------------------------- | +# P1 | x x x x x x x x | +# P3 | x x x x x x | +# P5 | x x x x | +# P7 | x x | +# ----+-------------------------------------- | +# ALL | x x x x x x x x x x x x x x x x x x x | +# | +# | +# ================ shared.git ======================= | +# | T A B C D E F G H I J K L M N O P Q R X Y Z <objects/info/alternates> +# ----+---------------------------------------------- +# Px1 | s s s x x x +# Px2*| s s s ! ! ! +# ----+---------------------------------------------- +# ALL | s s s s s s s s s s s s s s s s s s s x x x +# +############################################################################# +test_expect_success 'shared: one pack is redundant with --alt-odb' ' + ( + cd "$shared_repo" && + git pack-redundant --all --alt-odb >out && + format_packfiles <out >actual && + test_line_count = 1 actual + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# ================ master.git =============== +# | T A B C D E F G H I J K L M N O P Q R <----------------+ +# ----+-------------------------------------- | +# P1 | x x x x x x x x | +# P3 | x x x x x x | +# P5 | x x x x | +# P7 | x x | +# ----+-------------------------------------- | +# ALL | x x x x x x x x x x x x x x x x x x x | +# | +# | +# ================ shared.git ======================= | +# | T A B C D E F G H I J K L M N O P Q R X Y Z <objects/info/alternates> +# ----+---------------------------------------------- +# Px1*| s s s i i i +# Px2*| s s s i i i +# ----+---------------------------------------------- +# ALL | s s s s s s s s s s s s s s s s s s s i i i +# (ignored objects, marked with i) +# +############################################################################# +test_expect_success 'shared: ignore unique objects and all two packs are redundant' ' + ( + cd "$shared_repo" && + cat >expect <<-EOF && + Px1:$Px1 + Px2:$Px2 + EOF + git pack-redundant --all --alt-odb >out <<-EOF && + $X + $Y + $Z + EOF + format_packfiles <out >actual && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t5324-split-commit-graph.sh b/t/t5324-split-commit-graph.sh new file mode 100755 index 0000000000..e2c39533d3 --- /dev/null +++ b/t/t5324-split-commit-graph.sh @@ -0,0 +1,347 @@ +#!/bin/sh + +test_description='split commit graph' +. ./test-lib.sh + +GIT_TEST_COMMIT_GRAPH=0 + +test_expect_success 'setup repo' ' + git init && + git config core.commitGraph true && + git config gc.writeCommitGraph false && + infodir=".git/objects/info" && + graphdir="$infodir/commit-graphs" && + test_oid_init +' + +graph_read_expect() { + NUM_BASE=0 + if test ! -z $2 + then + NUM_BASE=$2 + fi + cat >expect <<- EOF + header: 43475048 1 1 3 $NUM_BASE + num_commits: $1 + chunks: oid_fanout oid_lookup commit_metadata + EOF + git commit-graph read >output && + test_cmp expect output +} + +test_expect_success 'create commits and write commit-graph' ' + for i in $(test_seq 3) + do + test_commit $i && + git branch commits/$i || return 1 + done && + git commit-graph write --reachable && + test_path_is_file $infodir/commit-graph && + graph_read_expect 3 +' + +graph_git_two_modes() { + git -c core.commitGraph=true $1 >output + git -c core.commitGraph=false $1 >expect + test_cmp expect output +} + +graph_git_behavior() { + MSG=$1 + BRANCH=$2 + COMPARE=$3 + test_expect_success "check normal git operations: $MSG" ' + graph_git_two_modes "log --oneline $BRANCH" && + graph_git_two_modes "log --topo-order $BRANCH" && + graph_git_two_modes "log --graph $COMPARE..$BRANCH" && + graph_git_two_modes "branch -vv" && + graph_git_two_modes "merge-base -a $BRANCH $COMPARE" + ' +} + +graph_git_behavior 'graph exists' commits/3 commits/1 + +verify_chain_files_exist() { + for hash in $(cat $1/commit-graph-chain) + do + test_path_is_file $1/graph-$hash.graph || return 1 + done +} + +test_expect_success 'add more commits, and write a new base graph' ' + git reset --hard commits/1 && + for i in $(test_seq 4 5) + do + test_commit $i && + git branch commits/$i || return 1 + done && + git reset --hard commits/2 && + for i in $(test_seq 6 10) + do + test_commit $i && + git branch commits/$i || return 1 + done && + git reset --hard commits/2 && + git merge commits/4 && + git branch merge/1 && + git reset --hard commits/4 && + git merge commits/6 && + git branch merge/2 && + git commit-graph write --reachable && + graph_read_expect 12 +' + +test_expect_success 'fork and fail to base a chain on a commit-graph file' ' + test_when_finished rm -rf fork && + git clone . fork && + ( + cd fork && + rm .git/objects/info/commit-graph && + echo "$(pwd)/../.git/objects" >.git/objects/info/alternates && + test_commit new-commit && + git commit-graph write --reachable --split && + test_path_is_file $graphdir/commit-graph-chain && + test_line_count = 1 $graphdir/commit-graph-chain && + verify_chain_files_exist $graphdir + ) +' + +test_expect_success 'add three more commits, write a tip graph' ' + git reset --hard commits/3 && + git merge merge/1 && + git merge commits/5 && + git merge merge/2 && + git branch merge/3 && + git commit-graph write --reachable --split && + test_path_is_missing $infodir/commit-graph && + test_path_is_file $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 2 graph-files && + verify_chain_files_exist $graphdir +' + +graph_git_behavior 'split commit-graph: merge 3 vs 2' merge/3 merge/2 + +test_expect_success 'add one commit, write a tip graph' ' + test_commit 11 && + git branch commits/11 && + git commit-graph write --reachable --split && + test_path_is_missing $infodir/commit-graph && + test_path_is_file $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 3 graph-files && + verify_chain_files_exist $graphdir +' + +graph_git_behavior 'three-layer commit-graph: commit 11 vs 6' commits/11 commits/6 + +test_expect_success 'add one commit, write a merged graph' ' + test_commit 12 && + git branch commits/12 && + git commit-graph write --reachable --split && + test_path_is_file $graphdir/commit-graph-chain && + test_line_count = 2 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 2 graph-files && + verify_chain_files_exist $graphdir +' + +graph_git_behavior 'merged commit-graph: commit 12 vs 6' commits/12 commits/6 + +test_expect_success 'create fork and chain across alternate' ' + git clone . fork && + ( + cd fork && + git config core.commitGraph true && + rm -rf $graphdir && + echo "$(pwd)/../.git/objects" >.git/objects/info/alternates && + test_commit 13 && + git branch commits/13 && + git commit-graph write --reachable --split && + test_path_is_file $graphdir/commit-graph-chain && + test_line_count = 3 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files && + git -c core.commitGraph=true rev-list HEAD >expect && + git -c core.commitGraph=false rev-list HEAD >actual && + test_cmp expect actual && + test_commit 14 && + git commit-graph write --reachable --split --object-dir=.git/objects/ && + test_line_count = 3 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files + ) +' + +graph_git_behavior 'alternate: commit 13 vs 6' commits/13 commits/6 + +test_expect_success 'test merge stragety constants' ' + git clone . merge-2 && + ( + cd merge-2 && + git config core.commitGraph true && + test_line_count = 2 $graphdir/commit-graph-chain && + test_commit 14 && + git commit-graph write --reachable --split --size-multiple=2 && + test_line_count = 3 $graphdir/commit-graph-chain + + ) && + git clone . merge-10 && + ( + cd merge-10 && + git config core.commitGraph true && + test_line_count = 2 $graphdir/commit-graph-chain && + test_commit 14 && + git commit-graph write --reachable --split --size-multiple=10 && + test_line_count = 1 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files + ) && + git clone . merge-10-expire && + ( + cd merge-10-expire && + git config core.commitGraph true && + test_line_count = 2 $graphdir/commit-graph-chain && + test_commit 15 && + git commit-graph write --reachable --split --size-multiple=10 --expire-time=1980-01-01 && + test_line_count = 1 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 3 graph-files + ) && + git clone --no-hardlinks . max-commits && + ( + cd max-commits && + git config core.commitGraph true && + test_line_count = 2 $graphdir/commit-graph-chain && + test_commit 16 && + test_commit 17 && + git commit-graph write --reachable --split --max-commits=1 && + test_line_count = 1 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files + ) +' + +test_expect_success 'remove commit-graph-chain file after flattening' ' + git clone . flatten && + ( + cd flatten && + test_line_count = 2 $graphdir/commit-graph-chain && + git commit-graph write --reachable && + test_path_is_missing $graphdir/commit-graph-chain && + ls $graphdir >graph-files && + test_line_count = 0 graph-files + ) +' + +corrupt_file() { + file=$1 + pos=$2 + data="${3:-\0}" + chmod a+w "$file" && + printf "$data" | dd of="$file" bs=1 seek="$pos" conv=notrunc +} + +test_expect_success 'verify hashes along chain, even in shallow' ' + git clone --no-hardlinks . verify && + ( + cd verify && + git commit-graph verify && + base_file=$graphdir/graph-$(head -n 1 $graphdir/commit-graph-chain).graph && + corrupt_file "$base_file" 1760 "\01" && + test_must_fail git commit-graph verify --shallow 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "incorrect checksum" err + ) +' + +test_expect_success 'verify --shallow does not check base contents' ' + git clone --no-hardlinks . verify-shallow && + ( + cd verify-shallow && + git commit-graph verify && + base_file=$graphdir/graph-$(head -n 1 $graphdir/commit-graph-chain).graph && + corrupt_file "$base_file" 1000 "\01" && + git commit-graph verify --shallow && + test_must_fail git commit-graph verify 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "incorrect checksum" err + ) +' + +test_expect_success 'warn on base graph chunk incorrect' ' + git clone --no-hardlinks . base-chunk && + ( + cd base-chunk && + git commit-graph verify && + base_file=$graphdir/graph-$(tail -n 1 $graphdir/commit-graph-chain).graph && + corrupt_file "$base_file" 1376 "\01" && + git commit-graph verify --shallow 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "commit-graph chain does not match" err + ) +' + +test_expect_success 'verify after commit-graph-chain corruption' ' + git clone --no-hardlinks . verify-chain && + ( + cd verify-chain && + corrupt_file "$graphdir/commit-graph-chain" 60 "G" && + git commit-graph verify 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "invalid commit-graph chain" err && + corrupt_file "$graphdir/commit-graph-chain" 60 "A" && + git commit-graph verify 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "unable to find all commit-graph files" err + ) +' + +test_expect_success 'verify across alternates' ' + git clone --no-hardlinks . verify-alt && + ( + cd verify-alt && + rm -rf $graphdir && + altdir="$(pwd)/../.git/objects" && + echo "$altdir" >.git/objects/info/alternates && + git commit-graph verify --object-dir="$altdir/" && + test_commit extra && + git commit-graph write --reachable --split && + tip_file=$graphdir/graph-$(tail -n 1 $graphdir/commit-graph-chain).graph && + corrupt_file "$tip_file" 100 "\01" && + test_must_fail git commit-graph verify --shallow 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "commit-graph has incorrect fanout value" err + ) +' + +test_expect_success 'add octopus merge' ' + git reset --hard commits/10 && + git merge commits/3 commits/4 && + git branch merge/octopus && + git commit-graph write --reachable --split && + git commit-graph verify 2>err && + test_line_count = 3 err && + test_i18ngrep ! warning err && + test_line_count = 3 $graphdir/commit-graph-chain +' + +graph_git_behavior 'graph exists' merge/octopus commits/12 + +test_expect_success 'split across alternate where alternate is not split' ' + git commit-graph write --reachable && + test_path_is_file .git/objects/info/commit-graph && + cp .git/objects/info/commit-graph . && + git clone --no-hardlinks . alt-split && + ( + cd alt-split && + rm -f .git/objects/info/commit-graph && + echo "$(pwd)"/../.git/objects >.git/objects/info/alternates && + test_commit 18 && + git commit-graph write --reachable --split && + test_line_count = 1 $graphdir/commit-graph-chain + ) && + test_cmp commit-graph .git/objects/info/commit-graph +' + +test_done diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index f1932ea431..571d620aed 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -288,7 +288,7 @@ test_expect_success 'receive-pack de-dupes .have lines' ' $shared .have EOF - GIT_TRACE_PACKET=$(pwd)/trace \ + GIT_TRACE_PACKET=$(pwd)/trace GIT_TEST_PROTOCOL_VERSION= \ git push \ --receive-pack="unset GIT_TRACE_PACKET; git-receive-pack" \ fork HEAD:foo && diff --git a/t/t5403-post-checkout-hook.sh b/t/t5403-post-checkout-hook.sh index a539ffc080..a39b3b5c78 100755 --- a/t/t5403-post-checkout-hook.sh +++ b/t/t5403-post-checkout-hook.sh @@ -67,7 +67,7 @@ test_expect_success 'post-checkout is triggered on rebase with fast-forward' ' test_expect_success 'post-checkout hook is triggered by clone' ' mkdir -p templates/hooks && write_script templates/hooks/post-checkout <<-\EOF && - echo "$@" >$GIT_DIR/post-checkout.args + echo "$@" >"$GIT_DIR/post-checkout.args" EOF git clone --template=templates . clone3 && test -f clone3/.git/post-checkout.args diff --git a/t/t5407-post-rewrite-hook.sh b/t/t5407-post-rewrite-hook.sh index a4a5903cba..7344253bfb 100755 --- a/t/t5407-post-rewrite-hook.sh +++ b/t/t5407-post-rewrite-hook.sh @@ -131,7 +131,7 @@ test_expect_success 'git rebase -m --skip' ' test_expect_success 'git rebase with implicit use of interactive backend' ' git reset --hard D && clear_hook_input && - test_must_fail git rebase --keep --onto A B && + test_must_fail git rebase --keep-empty --onto A B && echo C > foo && git add foo && git rebase --continue && @@ -146,7 +146,7 @@ test_expect_success 'git rebase with implicit use of interactive backend' ' test_expect_success 'git rebase --skip with implicit use of interactive backend' ' git reset --hard D && clear_hook_input && - test_must_fail git rebase --keep --onto A B && + test_must_fail git rebase --keep-empty --onto A B && test_must_fail git rebase --skip && echo D > foo && git add foo && diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 49c540b1e1..6b97923964 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -636,7 +636,9 @@ test_expect_success 'fetch-pack cannot fetch a raw sha1 that is not advertised a test_commit -C server 6 && git init client && - test_must_fail git -C client fetch-pack ../server \ + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION= git -C client fetch-pack ../server \ $(git -C server rev-parse refs/heads/master^) 2>err && test_i18ngrep "Server does not allow request for unadvertised object" err ' @@ -706,13 +708,22 @@ do # file with scheme for p in file do - test_expect_success "fetch-pack --diag-url $p://$h/$r" ' + test_expect_success !MINGW "fetch-pack --diag-url $p://$h/$r" ' check_prot_path $p://$h/$r $p "/$r" ' + test_expect_success MINGW "fetch-pack --diag-url $p://$h/$r" ' + check_prot_path $p://$h/$r $p "//$h/$r" + ' + test_expect_success MINGW "fetch-pack --diag-url $p:///$r" ' + check_prot_path $p:///$r $p "/$r" + ' # No "/~" -> "~" conversion for file - test_expect_success "fetch-pack --diag-url $p://$h/~$r" ' + test_expect_success !MINGW "fetch-pack --diag-url $p://$h/~$r" ' check_prot_path $p://$h/~$r $p "/~$r" ' + test_expect_success MINGW "fetch-pack --diag-url $p://$h/~$r" ' + check_prot_path $p://$h/~$r $p "//$h/~$r" + ' done # file without scheme for h in nohost nohost:12 [::1] [::1]:23 [ [:aa @@ -781,6 +792,44 @@ test_expect_success 'clone shallow since selects no commits' ' ) ' +# A few subtle things about the request in this test: +# +# - the server must have commit-graphs present and enabled +# +# - the history is such that our want/have share a common ancestor ("base" +# here) +# +# - we send only a single have, which is fewer than a normal client would +# send. This ensures that we don't parse "base" up front with +# parse_object(), but rather traverse to it as a parent while deciding if we +# can stop the "have" negotiation, and call parse_commit(). The former +# sees the actual object data and so always loads the three oid, whereas the +# latter will try to load it lazily. +# +# - we must use protocol v2, because it handles the "have" negotiation before +# processing the shallow directives +# +test_expect_success 'shallow since with commit graph and already-seen commit' ' + test_create_repo shallow-since-graph && + ( + cd shallow-since-graph && + test_commit base && + test_commit master && + git checkout -b other HEAD^ && + test_commit other && + git commit-graph write --reachable && + git config core.commitGraph true && + + GIT_PROTOCOL=version=2 git upload-pack . <<-EOF >/dev/null + 0012command=fetch + 00010013deepen-since 1 + 0032want $(git rev-parse other) + 0032have $(git rev-parse master) + 0000 + EOF + ) +' + test_expect_success 'shallow clone exclude tag two' ' test_create_repo shallow-exclude && ( @@ -918,7 +967,7 @@ test_expect_success 'fetch with --filter=blob:limit=0 and HTTP' ' fetch_filter_blob_limit_zero "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" ' -stop_httpd - +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5503-tagfollow.sh b/t/t5503-tagfollow.sh index 4ca48f0276..6041a4dd32 100755 --- a/t/t5503-tagfollow.sh +++ b/t/t5503-tagfollow.sh @@ -47,7 +47,7 @@ get_needs () { test -s "$1" && perl -alne ' next unless $F[1] eq "upload-pack<"; - last if $F[2] eq "0000"; + next unless $F[2] eq "want"; print $F[2], " ", $F[3]; ' "$1" } diff --git a/t/t5504-fetch-receive-strict.sh b/t/t5504-fetch-receive-strict.sh index 7bc706873c..fdfe179b11 100755 --- a/t/t5504-fetch-receive-strict.sh +++ b/t/t5504-fetch-receive-strict.sh @@ -164,9 +164,9 @@ test_expect_success 'fsck with unsorted skipList' ' test_expect_success 'fsck with invalid or bogus skipList input' ' git -c fsck.skipList=/dev/null -c fsck.missingEmail=ignore fsck && test_must_fail git -c fsck.skipList=does-not-exist -c fsck.missingEmail=ignore fsck 2>err && - test_i18ngrep "Could not open skip list: does-not-exist" err && + test_i18ngrep "could not open.*: does-not-exist" err && test_must_fail git -c fsck.skipList=.git/config -c fsck.missingEmail=ignore fsck 2>err && - test_i18ngrep "Invalid SHA-1: \[core\]" err + test_i18ngrep "invalid object name: \[core\]" err ' test_expect_success 'fsck with other accepted skipList input (comments & empty lines)' ' @@ -193,7 +193,7 @@ test_expect_success 'fsck no garbage output from comments & empty lines errors' test_expect_success 'fsck with invalid abbreviated skipList input' ' echo $commit | test_copy_bytes 20 >SKIP.abbreviated && test_must_fail git -c fsck.skipList=SKIP.abbreviated fsck 2>err-abbreviated && - test_i18ngrep "^fatal: Invalid SHA-1: " err-abbreviated + test_i18ngrep "^fatal: invalid object name: " err-abbreviated ' test_expect_success 'fsck with exhaustive accepted skipList input (various types of comments etc.)' ' @@ -226,10 +226,10 @@ test_expect_success 'push with receive.fsck.skipList' ' test_must_fail git push --porcelain dst bogus && git --git-dir=dst/.git config receive.fsck.skipList does-not-exist && test_must_fail git push --porcelain dst bogus 2>err && - test_i18ngrep "Could not open skip list: does-not-exist" err && + test_i18ngrep "could not open.*: does-not-exist" err && git --git-dir=dst/.git config receive.fsck.skipList config && test_must_fail git push --porcelain dst bogus 2>err && - test_i18ngrep "Invalid SHA-1: \[core\]" err && + test_i18ngrep "invalid object name: \[core\]" err && git --git-dir=dst/.git config receive.fsck.skipList SKIP && git push --porcelain dst bogus @@ -255,10 +255,10 @@ test_expect_success 'fetch with fetch.fsck.skipList' ' test_must_fail git --git-dir=dst/.git fetch "file://$(pwd)" $refspec && git --git-dir=dst/.git config fetch.fsck.skipList does-not-exist && test_must_fail git --git-dir=dst/.git fetch "file://$(pwd)" $refspec 2>err && - test_i18ngrep "Could not open skip list: does-not-exist" err && + test_i18ngrep "could not open.*: does-not-exist" err && git --git-dir=dst/.git config fetch.fsck.skipList dst/.git/config && test_must_fail git --git-dir=dst/.git fetch "file://$(pwd)" $refspec 2>err && - test_i18ngrep "Invalid SHA-1: \[core\]" err && + test_i18ngrep "invalid object name: \[core\]" err && git --git-dir=dst/.git config fetch.fsck.skipList dst/.git/SKIP && git --git-dir=dst/.git fetch "file://$(pwd)" $refspec diff --git a/t/t5509-fetch-push-namespaces.sh b/t/t5509-fetch-push-namespaces.sh index c88df78c0b..75cbfcc392 100755 --- a/t/t5509-fetch-push-namespaces.sh +++ b/t/t5509-fetch-push-namespaces.sh @@ -124,4 +124,32 @@ test_expect_success 'try to update a hidden full ref' ' test_must_fail git -C original push pushee-namespaced master ' +test_expect_success 'set up ambiguous HEAD' ' + git init ambiguous && + ( + cd ambiguous && + git commit --allow-empty -m foo && + git update-ref refs/namespaces/ns/refs/heads/one HEAD && + git update-ref refs/namespaces/ns/refs/heads/two HEAD && + git symbolic-ref refs/namespaces/ns/HEAD \ + refs/namespaces/ns/refs/heads/two + ) +' + +test_expect_success 'clone chooses correct HEAD (v0)' ' + GIT_NAMESPACE=ns git -c protocol.version=0 \ + clone ambiguous ambiguous-v0 && + echo refs/heads/two >expect && + git -C ambiguous-v0 symbolic-ref HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'clone chooses correct HEAD (v2)' ' + GIT_NAMESPACE=ns git -c protocol.version=2 \ + clone ambiguous ambiguous-v2 && + echo refs/heads/two >expect && + git -C ambiguous-v2 symbolic-ref HEAD >actual && + test_cmp expect actual +' + test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 3b7b30568c..ecabbe1616 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -570,6 +570,19 @@ test_expect_success 'LHS of refspec follows ref disambiguation rules' ' ) ' +test_expect_success 'fetch.writeCommitGraph' ' + git clone three write && + ( + cd three && + test_commit new + ) && + ( + cd write && + git -c fetch.writeCommitGraph fetch origin && + test_path_is_file .git/objects/info/commit-graphs/commit-graph-chain + ) +' + # configured prune tests set_config_tristate () { @@ -902,6 +915,29 @@ test_expect_success C_LOCALE_OUTPUT 'fetch compact output' ' test_cmp expect actual ' +test_expect_success '--no-show-forced-updates' ' + mkdir forced-updates && + ( + cd forced-updates && + git init && + test_commit 1 && + test_commit 2 + ) && + git clone forced-updates forced-update-clone && + git clone forced-updates no-forced-update-clone && + git -C forced-updates reset --hard HEAD~1 && + ( + cd forced-update-clone && + git fetch --show-forced-updates origin 2>output && + test_i18ngrep "(forced update)" output + ) && + ( + cd no-forced-update-clone && + git fetch --no-show-forced-updates origin 2>output && + test_i18ngrep ! "(forced update)" output + ) +' + setup_negotiation_tip () { SERVER="$1" URL="$2" @@ -978,6 +1014,7 @@ test_expect_success '--negotiation-tip limits "have" lines sent with HTTP protoc check_negotiation_tip ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index ced15ae122..43e1d8d4d2 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -223,7 +223,9 @@ test_expect_success 'ls-remote --symref' ' $(git rev-parse refs/tags/mark1.10) refs/tags/mark1.10 $(git rev-parse refs/tags/mark1.2) refs/tags/mark1.2 EOF - git ls-remote --symref >actual && + # Protocol v2 supports sending symrefs for refs other than HEAD, so use + # protocol v0 here. + GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref >actual && test_cmp expect actual ' @@ -232,7 +234,9 @@ test_expect_success 'ls-remote with filtered symref (refname)' ' ref: refs/heads/master HEAD 1bd44cb9d13204b0fe1958db0082f5028a16eb3a HEAD EOF - git ls-remote --symref . HEAD >actual && + # Protocol v2 supports sending symrefs for refs other than HEAD, so use + # protocol v0 here. + GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref . HEAD >actual && test_cmp expect actual ' @@ -243,7 +247,9 @@ test_expect_failure 'ls-remote with filtered symref (--heads)' ' 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/foo 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master EOF - git ls-remote --symref --heads . >actual && + # Protocol v2 supports sending symrefs for refs other than HEAD, so use + # protocol v0 here. + GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref --heads . >actual && test_cmp expect actual ' @@ -252,15 +258,16 @@ test_expect_success 'ls-remote --symref omits filtered-out matches' ' 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/foo 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master EOF - git ls-remote --symref --heads . >actual && + # Protocol v2 supports sending symrefs for refs other than HEAD, so use + # protocol v0 here. + GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref --heads . >actual && test_cmp expect actual && - git ls-remote --symref . "refs/heads/*" >actual && + GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref . "refs/heads/*" >actual && test_cmp expect actual ' test_lazy_prereq GIT_DAEMON ' - test_tristate GIT_TEST_GIT_DAEMON && - test "$GIT_TEST_GIT_DAEMON" != false + git env--helper --type=bool --default=true --exit-code GIT_TEST_GIT_DAEMON ' # This test spawns a daemon, so run it only if the user would be OK with diff --git a/t/t5514-fetch-multiple.sh b/t/t5514-fetch-multiple.sh index 0030c92e1a..5426d4b5ab 100755 --- a/t/t5514-fetch-multiple.sh +++ b/t/t5514-fetch-multiple.sh @@ -105,9 +105,12 @@ test_expect_success 'git fetch --multiple (two remotes)' ' git remote rm origin && git remote add one ../one && git remote add two ../two && - git fetch --multiple one two && + GIT_TRACE=1 git fetch --multiple one two 2>trace && git branch -r > output && - test_cmp ../expect output) + test_cmp ../expect output && + grep "built-in: git gc" trace >gc && + test_line_count = 1 gc + ) ' test_expect_success 'git fetch --multiple (bad remote names)' ' diff --git a/t/t5515-fetch-merge-logic.sh b/t/t5515-fetch-merge-logic.sh index 36b0dbc01c..961eb35c99 100755 --- a/t/t5515-fetch-merge-logic.sh +++ b/t/t5515-fetch-merge-logic.sh @@ -6,10 +6,11 @@ test_description='Merge logic in fetch' -. ./test-lib.sh +# NEEDSWORK: If the overspecification of the expected result is reduced, we +# might be able to run this test in all protocol versions. +GIT_TEST_PROTOCOL_VERSION= -LF=' -' +. ./test-lib.sh test_expect_success setup ' GIT_AUTHOR_DATE="2006-06-26 00:00:00 +0000" && diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 37e8e80893..c81ca360ac 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -1147,8 +1147,12 @@ test_expect_success 'fetch exact SHA1' ' git prune && test_must_fail git cat-file -t $the_commit && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + # fetching the hidden object should fail by default - test_must_fail git fetch -v ../testrepo $the_commit:refs/heads/copy 2>err && + test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + git fetch -v ../testrepo $the_commit:refs/heads/copy 2>err && test_i18ngrep "Server does not allow request for unadvertised object" err && test_must_fail git rev-parse --verify refs/heads/copy && @@ -1204,7 +1208,10 @@ do mk_empty shallow && ( cd shallow && - test_must_fail git fetch --depth=1 ../testrepo/.git $SHA1 && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + git fetch --depth=1 ../testrepo/.git $SHA1 && git --git-dir=../testrepo/.git config uploadpack.allowreachablesha1inwant true && git fetch --depth=1 ../testrepo/.git $SHA1 && git cat-file commit $SHA1 @@ -1232,15 +1239,21 @@ do mk_empty shallow && ( cd shallow && - test_must_fail ok=sigpipe git fetch ../testrepo/.git $SHA1_3 && - test_must_fail ok=sigpipe git fetch ../testrepo/.git $SHA1_1 && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + git fetch ../testrepo/.git $SHA1_3 && + test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + git fetch ../testrepo/.git $SHA1_1 && git --git-dir=../testrepo/.git config uploadpack.allowreachablesha1inwant true && git fetch ../testrepo/.git $SHA1_1 && git cat-file commit $SHA1_1 && test_must_fail git cat-file commit $SHA1_2 && git fetch ../testrepo/.git $SHA1_2 && git cat-file commit $SHA1_2 && - test_must_fail ok=sigpipe git fetch ../testrepo/.git $SHA1_3 + test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + git fetch ../testrepo/.git $SHA1_3 2>err && + test_i18ngrep "remote error:.*not our ref.*$SHA1_3\$" err ) ' done @@ -1272,6 +1285,17 @@ test_expect_success 'fetch follows tags by default' ' test_cmp expect actual ' +test_expect_success 'peeled advertisements are not considered ref tips' ' + mk_empty testrepo && + git -C testrepo commit --allow-empty -m one && + git -C testrepo commit --allow-empty -m two && + git -C testrepo tag -m foo mytag HEAD^ && + oid=$(git -C testrepo rev-parse mytag^{commit}) && + test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + git fetch testrepo $oid 2>err && + test_i18ngrep "Server does not allow request for unadvertised object" err +' + test_expect_success 'pushing a specific ref applies remote.$name.push as refmap' ' mk_test testrepo heads/master && rm -fr src dst && @@ -1370,7 +1394,7 @@ test_expect_success 'push does not follow tags by default' ' test_cmp expect actual ' -test_expect_success 'push --follow-tag only pushes relevant tags' ' +test_expect_success 'push --follow-tags only pushes relevant tags' ' mk_test testrepo heads/master && rm -fr src dst && git init src && @@ -1384,7 +1408,7 @@ test_expect_success 'push --follow-tag only pushes relevant tags' ' git tag -m "future" future && git checkout master && git for-each-ref refs/heads/master refs/tags/tag >../expect && - git push --follow-tag ../dst master + git push --follow-tags ../dst master ) && ( cd dst && diff --git a/t/t5517-push-mirror.sh b/t/t5517-push-mirror.sh index c05a661400..e4edd56404 100755 --- a/t/t5517-push-mirror.sh +++ b/t/t5517-push-mirror.sh @@ -265,4 +265,14 @@ test_expect_success 'remote.foo.mirror=no has no effect' ' ' +test_expect_success 'push to mirrored repository with refspec fails' ' + mk_repo_pair && + ( + cd master && + echo one >foo && git add foo && git commit -m one && + git config --add remote.up.mirror true && + test_must_fail git push up master + ) +' + test_done diff --git a/t/t5521-pull-options.sh b/t/t5521-pull-options.sh index c19d8dbc9d..ccde8ba491 100755 --- a/t/t5521-pull-options.sh +++ b/t/t5521-pull-options.sh @@ -77,6 +77,14 @@ test_expect_success 'git pull -q -v' ' test_must_be_empty out && test -s err) ' +test_expect_success 'git pull --cleanup errors early on invalid argument' ' + mkdir clonedcleanup && + (cd clonedcleanup && git init && + test_must_fail git pull --cleanup invalid "../parent" >out 2>err && + test_must_be_empty out && + test -s err) +' + test_expect_success 'git pull --force' ' mkdir clonedoldstyle && diff --git a/t/t5530-upload-pack-error.sh b/t/t5530-upload-pack-error.sh index 4f6e32b04c..a1d3031d40 100755 --- a/t/t5530-upload-pack-error.sh +++ b/t/t5530-upload-pack-error.sh @@ -57,13 +57,25 @@ test_expect_success 'upload-pack fails due to error in rev-list' ' grep "bad tree object" output.err ' -test_expect_success 'upload-pack error message when bad ref requested' ' +test_expect_success 'upload-pack fails due to bad want (no object)' ' printf "0045want %s multi_ack_detailed\n00000009done\n0000" \ "deadbeefdeadbeefdeadbeefdeadbeefdeadbeef" >input && test_must_fail git upload-pack . <input >output 2>output.err && - grep -q "not our ref" output.err && - ! grep -q multi_ack_detailed output.err + grep "not our ref" output.err && + grep "ERR" output && + ! grep multi_ack_detailed output.err +' + +test_expect_success 'upload-pack fails due to bad want (not tip)' ' + + oid=$(echo an object we have | git hash-object -w --stdin) && + printf "0045want %s multi_ack_detailed\n00000009done\n0000" \ + "$oid" >input && + test_must_fail git upload-pack . <input >output 2>output.err && + grep "not our ref" output.err && + grep "ERR" output && + ! grep multi_ack_detailed output.err ' test_expect_success 'upload-pack fails due to error in pack-objects enumeration' ' diff --git a/t/t5531-deep-submodule-push.sh b/t/t5531-deep-submodule-push.sh index e2c37fd978..4ad059e6be 100755 --- a/t/t5531-deep-submodule-push.sh +++ b/t/t5531-deep-submodule-push.sh @@ -363,7 +363,7 @@ test_expect_success 'push succeeds if submodule has no remote and is on the firs ) && git add b && git commit -m "added submodule" && - git push --recurse-submodule=check origin master + git push --recurse-submodules=check origin master ) ' diff --git a/t/t5537-fetch-shallow.sh b/t/t5537-fetch-shallow.sh index 6caf628efa..97a67728ca 100755 --- a/t/t5537-fetch-shallow.sh +++ b/t/t5537-fetch-shallow.sh @@ -255,6 +255,7 @@ test_expect_success 'shallow fetches check connectivity before writing shallow f git -C client fsck ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh index 5fbf67c446..b4ad81f006 100755 --- a/t/t5539-fetch-http-shallow.sh +++ b/t/t5539-fetch-http-shallow.sh @@ -67,7 +67,10 @@ test_expect_success 'no shallow lines after receiving ACK ready' ' cd clone && git checkout --orphan newnew && test_commit new-too && - GIT_TRACE_PACKET="$TRASH_DIRECTORY/trace" git fetch --depth=2 && + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + GIT_TRACE_PACKET="$TRASH_DIRECTORY/trace" GIT_TEST_PROTOCOL_VERSION= \ + git fetch --depth=2 && grep "fetch-pack< ACK .* ready" ../trace && ! grep "fetch-pack> done" ../trace ) @@ -146,5 +149,4 @@ test_expect_success 'fetching deepen' ' ) ' -stop_httpd test_done diff --git a/t/t5540-http-push-webdav.sh b/t/t5540-http-push-webdav.sh index 88ff5a49e4..a094fd5e71 100755 --- a/t/t5540-http-push-webdav.sh +++ b/t/t5540-http-push-webdav.sh @@ -176,6 +176,4 @@ test_expect_failure 'push to password-protected repository (no user in URL)' ' test_cmp expect actual ' -stop_httpd - test_done diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index 5475afc052..b86ddb60f2 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -47,7 +47,12 @@ test_expect_success 'no empty path components' ' cd "$ROOT_PATH" && git clone $HTTPD_URL/smart/test_repo.git/ test_repo_clone && - check_access_log exp + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test -z "$GIT_TEST_PROTOCOL_VERSION" + then + check_access_log exp + fi ' test_expect_success 'clone remote repository' ' @@ -128,7 +133,12 @@ GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200 POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200 EOF test_expect_success 'used receive-pack service' ' - check_access_log exp + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test -z "$GIT_TEST_PROTOCOL_VERSION" + then + check_access_log exp + fi ' test_http_push_nonff "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git \ @@ -167,6 +177,55 @@ test_expect_success 'push (chunked)' ' test $HEAD = $(git rev-parse --verify HEAD)) ' +test_expect_success 'push --atomic also prevents branch creation, reports collateral' ' + # Setup upstream repo - empty for now + d=$HTTPD_DOCUMENT_ROOT_PATH/atomic-branches.git && + git init --bare "$d" && + test_config -C "$d" http.receivepack true && + up="$HTTPD_URL"/smart/atomic-branches.git && + + # Tell "$up" about two branches for now + test_commit atomic1 && + test_commit atomic2 && + git branch collateral && + git push "$up" master collateral && + + # collateral is a valid push, but should be failed by atomic push + git checkout collateral && + test_commit collateral1 && + + # Make master incompatible with upstream to provoke atomic + git checkout master && + git reset --hard HEAD^ && + + # Add a new branch which should be failed by atomic push. This is a + # regression case. + git branch atomic && + + # --atomic should cause entire push to be rejected + test_must_fail git push --atomic "$up" master atomic collateral 2>output && + + # the new branch should not have been created upstream + test_must_fail git -C "$d" show-ref --verify refs/heads/atomic && + + # upstream should still reflect atomic2, the last thing we pushed + # successfully + git rev-parse atomic2 >expected && + # on master... + git -C "$d" rev-parse refs/heads/master >actual && + test_cmp expected actual && + # ...and collateral. + git -C "$d" rev-parse refs/heads/collateral >actual && + test_cmp expected actual && + + # the failed refs should be indicated to the user + grep "^ ! .*rejected.* master -> master" output && + + # the collateral failure refs should be indicated to the user + grep "^ ! .*rejected.* atomic -> atomic .*atomic push failed" output && + grep "^ ! .*rejected.* collateral -> collateral .*atomic push failed" output +' + test_expect_success 'push --all can push to empty repo' ' d=$HTTPD_DOCUMENT_ROOT_PATH/empty-all.git && git init --bare "$d" && @@ -203,7 +262,7 @@ test_expect_success TTY 'push shows progress when stderr is a tty' ' cd "$ROOT_PATH"/test_repo_clone && test_commit noisy && test_terminal git push >output 2>&1 && - test_i18ngrep "^Writing objects" output + test_i18ngrep "Writing objects" output ' test_expect_success TTY 'push --quiet silences status and progress' ' @@ -218,7 +277,7 @@ test_expect_success TTY 'push --no-progress silences progress but not status' ' test_commit no-progress && test_terminal git push --no-progress >output 2>&1 && test_i18ngrep "^To http" output && - test_i18ngrep ! "^Writing objects" output + test_i18ngrep ! "Writing objects" output ' test_expect_success 'push --progress shows progress to non-tty' ' @@ -226,7 +285,7 @@ test_expect_success 'push --progress shows progress to non-tty' ' test_commit progress && git push --progress >output 2>&1 && test_i18ngrep "^To http" output && - test_i18ngrep "^Writing objects" output + test_i18ngrep "Writing objects" output ' test_expect_success 'http push gives sane defaults to reflog' ' @@ -373,5 +432,4 @@ test_expect_success 'colorize errors/hints' ' test_i18ngrep ! "^hint: " decoded ' -stop_httpd test_done diff --git a/t/t5542-push-http-shallow.sh b/t/t5542-push-http-shallow.sh index 5165833157..ddc1db722d 100755 --- a/t/t5542-push-http-shallow.sh +++ b/t/t5542-push-http-shallow.sh @@ -90,5 +90,4 @@ EOF ) ' -stop_httpd test_done diff --git a/t/t5545-push-options.sh b/t/t5545-push-options.sh index b47a95871c..04b34c4de1 100755 --- a/t/t5545-push-options.sh +++ b/t/t5545-push-options.sh @@ -278,6 +278,7 @@ test_expect_success 'push options keep quoted characters intact (http)' ' test_cmp expect "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git/hooks/pre-receive.push_options ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index 6d7d88ccc9..b811d89cfd 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -408,5 +408,20 @@ test_expect_success 'print HTTP error when any intermediate redirect throws erro test_i18ngrep "unable to access.*/redir-to/502" stderr ' -stop_httpd +test_expect_success 'fetching via http alternates works' ' + parent=$HTTPD_DOCUMENT_ROOT_PATH/alt-parent.git && + git init --bare "$parent" && + git -C "$parent" --work-tree=. commit --allow-empty -m foo && + git -C "$parent" update-server-info && + commit=$(git -C "$parent" rev-parse HEAD) && + + child=$HTTPD_DOCUMENT_ROOT_PATH/alt-child.git && + git init --bare "$child" && + echo "../../alt-parent.git/objects" >"$child/objects/info/alternates" && + git -C "$child" update-ref HEAD $commit && + git -C "$child" update-server-info && + + git -c http.followredirects=true clone "$HTTPD_URL/dumb/alt-child.git" +' + test_done diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index 8630b0cc39..e38e543867 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -43,7 +43,8 @@ test_expect_success 'clone http repository' ' < Cache-Control: no-cache, max-age=0, must-revalidate < Content-Type: application/x-git-upload-pack-result EOF - GIT_TRACE_CURL=true git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && + GIT_TRACE_CURL=true GIT_TEST_PROTOCOL_VERSION= \ + git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && test_cmp file clone/file && tr '\''\015'\'' Q <err | sed -e " @@ -80,12 +81,18 @@ test_expect_success 'clone http repository' ' /^< Content-Length: /d /^< Transfer-Encoding: /d " >actual && - sed -e "s/^> Accept-Encoding: .*/> Accept-Encoding: ENCODINGS/" \ - actual >actual.smudged && - test_cmp exp actual.smudged && - grep "Accept-Encoding:.*gzip" actual >actual.gzip && - test_line_count = 2 actual.gzip + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test -z "$GIT_TEST_PROTOCOL_VERSION" + then + sed -e "s/^> Accept-Encoding: .*/> Accept-Encoding: ENCODINGS/" \ + actual >actual.smudged && + test_cmp exp actual.smudged && + + grep "Accept-Encoding:.*gzip" actual >actual.gzip && + test_line_count = 2 actual.gzip + fi ' test_expect_success 'fetch changes via http' ' @@ -103,7 +110,13 @@ test_expect_success 'used upload-pack service' ' GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 POST /smart/repo.git/git-upload-pack HTTP/1.1 200 EOF - check_access_log exp + + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test -z "$GIT_TEST_PROTOCOL_VERSION" + then + check_access_log exp + fi ' test_expect_success 'follow redirects (301)' ' @@ -151,7 +164,17 @@ test_expect_success 'clone from auth-only-for-objects repository' ' test_expect_success 'no-op half-auth fetch does not require a password' ' set_askpass wrong && - git --git-dir=half-auth fetch && + + # NEEDSWORK: When using HTTP(S), protocol v0 supports a "half-auth" + # configuration with authentication required only when downloading + # objects and not refs, by having the HTTP server only require + # authentication for the "git-upload-pack" path and not "info/refs". + # This is not possible with protocol v2, since both objects and refs + # are obtained from the "git-upload-pack" path. A solution to this is + # to teach the server and client to be able to inline ls-refs requests + # as an Extra Parameter (see pack-protocol.txt), so that "info/refs" + # can serve refs, just like it does in protocol v0. + GIT_TEST_PROTOCOL_VERSION=0 git --git-dir=half-auth fetch && expect_askpass none ' @@ -176,7 +199,7 @@ test_expect_success 'GIT_SMART_HTTP can disable smart http' ' test_expect_success 'invalid Content-Type rejected' ' test_must_fail git clone $HTTPD_URL/broken_smart/repo.git 2>actual && - grep "not valid:" actual + test_i18ngrep "not valid:" actual ' test_expect_success 'create namespaced refs' ' @@ -215,8 +238,14 @@ test_expect_success 'cookies stored in http.cookiefile when http.savecookies set git config http.cookiefile cookies.txt && git config http.savecookies true && git ls-remote $HTTPD_URL/smart_cookies/repo.git master && - tail -3 cookies.txt | sort >cookies_tail.txt && - test_cmp expect_cookies.txt cookies_tail.txt + + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test -z "$GIT_TEST_PROTOCOL_VERSION" + then + tail -3 cookies.txt | sort >cookies_tail.txt && + test_cmp expect_cookies.txt cookies_tail.txt + fi ' test_expect_success 'transfer.hiderefs works over smart-http' ' @@ -272,11 +301,10 @@ test_expect_success CMDLINE_LIMIT \ ) ' -test_expect_success 'large fetch-pack requests can be split across POSTs' ' +test_expect_success 'large fetch-pack requests can be sent using chunked encoding' ' GIT_TRACE_CURL=true git -c http.postbuffer=65536 \ clone --bare "$HTTPD_URL/smart/repo.git" split.git 2>err && - grep "^=> Send header: POST" err >posts && - test_line_count = 2 posts + grep "^=> Send header: Transfer-Encoding: chunked" err ' test_expect_success 'test allowreachablesha1inwant' ' @@ -306,7 +334,10 @@ test_expect_success 'test allowreachablesha1inwant with unreachable' ' git init --bare test_reachable.git && git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && - test_must_fail git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" ' test_expect_success 'test allowanysha1inwant with unreachable' ' @@ -325,7 +356,10 @@ test_expect_success 'test allowanysha1inwant with unreachable' ' git init --bare test_reachable.git && git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && - test_must_fail git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" && git -C "$server" config uploadpack.allowanysha1inwant 1 && git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" @@ -429,5 +463,9 @@ test_expect_success 'GIT_TRACE_CURL_NO_DATA prevents data from being traced' ' ! grep "=> Send data" err ' -stop_httpd +test_expect_success 'server-side error detected' ' + test_must_fail git clone $HTTPD_URL/error_smart/repo.git 2>actual && + test_i18ngrep "server-side error" actual +' + test_done diff --git a/t/t5552-skipping-fetch-negotiator.sh b/t/t5552-skipping-fetch-negotiator.sh index 30857b84a8..f70cbcc9ca 100755 --- a/t/t5552-skipping-fetch-negotiator.sh +++ b/t/t5552-skipping-fetch-negotiator.sh @@ -60,29 +60,6 @@ test_expect_success 'commits with no parents are sent regardless of skip distanc have_not_sent c6 c4 c3 ' -test_expect_success 'unknown fetch.negotiationAlgorithm values error out' ' - rm -rf server client trace && - git init server && - test_commit -C server to_fetch && - - git init client && - test_commit -C client on_client && - git -C client checkout on_client && - - test_config -C client fetch.negotiationAlgorithm invalid && - test_must_fail git -C client fetch "$(pwd)/server" 2>err && - test_i18ngrep "unknown fetch negotiation algorithm" err && - - # Explicit "default" value - test_config -C client fetch.negotiationAlgorithm default && - git -C client -c fetch.negotiationAlgorithm=default fetch "$(pwd)/server" && - - # Implementation detail: If there is nothing to fetch, we will not error out - test_config -C client fetch.negotiationAlgorithm invalid && - git -C client fetch "$(pwd)/server" 2>err && - test_i18ngrep ! "unknown fetch negotiation algorithm" err -' - test_expect_success 'when two skips collide, favor the larger one' ' rm -rf server client trace && git init server && @@ -127,7 +104,10 @@ test_expect_success 'use ref advertisement to filter out commits' ' # not need to send any ancestors of "c3", but we still need to send "c3" # itself. test_config -C client fetch.negotiationalgorithm skipping && - trace_fetch client origin to_fetch && + + # The ref advertisement itself is filtered when protocol v2 is used, so + # use v0. + GIT_TEST_PROTOCOL_VERSION= trace_fetch client origin to_fetch && have_sent c5 c4^ c2side && have_not_sent c4 c4^^ c4^^^ ' diff --git a/t/t5553-set-upstream.sh b/t/t5553-set-upstream.sh new file mode 100755 index 0000000000..81975ad8f9 --- /dev/null +++ b/t/t5553-set-upstream.sh @@ -0,0 +1,178 @@ +#!/bin/sh + +test_description='"git fetch/pull --set-upstream" basic tests.' +. ./test-lib.sh + +check_config () { + printf "%s\n" "$2" "$3" >"expect.$1" && + { + git config "branch.$1.remote" && git config "branch.$1.merge" + } >"actual.$1" && + test_cmp "expect.$1" "actual.$1" +} + +check_config_missing () { + test_expect_code 1 git config "branch.$1.remote" && + test_expect_code 1 git config "branch.$1.merge" +} + +clear_config () { + for branch in "$@"; do + test_might_fail git config --unset-all "branch.$branch.remote" + test_might_fail git config --unset-all "branch.$branch.merge" + done +} + +ensure_fresh_upstream () { + rm -rf parent && git init --bare parent +} + +test_expect_success 'setup bare parent fetch' ' + ensure_fresh_upstream && + git remote add upstream parent +' + +test_expect_success 'setup commit on master and other fetch' ' + test_commit one && + git push upstream master && + git checkout -b other && + test_commit two && + git push upstream other +' + +# tests for fetch --set-upstream + +test_expect_success 'fetch --set-upstream does not set upstream w/o branch' ' + clear_config master other && + git checkout master && + git fetch --set-upstream upstream && + check_config_missing master && + check_config_missing other +' + +test_expect_success 'fetch --set-upstream upstream master sets branch master but not other' ' + clear_config master other && + git fetch --set-upstream upstream master && + check_config master upstream refs/heads/master && + check_config_missing other +' + +test_expect_success 'fetch --set-upstream upstream other sets branch other' ' + clear_config master other && + git fetch --set-upstream upstream other && + check_config master upstream refs/heads/other && + check_config_missing other +' + +test_expect_success 'fetch --set-upstream master:other does not set the branch other2' ' + clear_config other2 && + git fetch --set-upstream upstream master:other2 && + check_config_missing other2 +' + +test_expect_success 'fetch --set-upstream http://nosuchdomain.example.com fails with invalid url' ' + # master explicitly not cleared, we check that it is not touched from previous value + clear_config other other2 && + test_must_fail git fetch --set-upstream http://nosuchdomain.example.com && + check_config master upstream refs/heads/other && + check_config_missing other && + check_config_missing other2 +' + +test_expect_success 'fetch --set-upstream with valid URL sets upstream to URL' ' + clear_config other other2 && + url="file://'"$PWD"'" && + git fetch --set-upstream "$url" && + check_config master "$url" HEAD && + check_config_missing other && + check_config_missing other2 +' + +# tests for pull --set-upstream + +test_expect_success 'setup bare parent pull' ' + git remote rm upstream && + ensure_fresh_upstream && + git remote add upstream parent +' + +test_expect_success 'setup commit on master and other pull' ' + test_commit three && + git push --tags upstream master && + test_commit four && + git push upstream other +' + +test_expect_success 'pull --set-upstream upstream master sets branch master but not other' ' + clear_config master other && + git pull --set-upstream upstream master && + check_config master upstream refs/heads/master && + check_config_missing other +' + +test_expect_success 'pull --set-upstream master:other2 does not set the branch other2' ' + clear_config other2 && + git pull --set-upstream upstream master:other2 && + check_config_missing other2 +' + +test_expect_success 'pull --set-upstream upstream other sets branch master' ' + clear_config master other && + git pull --set-upstream upstream other && + check_config master upstream refs/heads/other && + check_config_missing other +' + +test_expect_success 'pull --set-upstream upstream tag does not set the tag' ' + clear_config three && + git pull --tags --set-upstream upstream three && + check_config_missing three +' + +test_expect_success 'pull --set-upstream http://nosuchdomain.example.com fails with invalid url' ' + # master explicitly not cleared, we check that it is not touched from previous value + clear_config other other2 three && + test_must_fail git pull --set-upstream http://nosuchdomain.example.com && + check_config master upstream refs/heads/other && + check_config_missing other && + check_config_missing other2 && + check_config_missing three +' + +test_expect_success 'pull --set-upstream upstream HEAD sets branch HEAD' ' + clear_config master other && + git pull --set-upstream upstream HEAD && + check_config master upstream HEAD && + git checkout other && + git pull --set-upstream upstream HEAD && + check_config other upstream HEAD +' + +test_expect_success 'pull --set-upstream upstream with more than one branch does nothing' ' + clear_config master three && + git pull --set-upstream upstream master three && + check_config_missing master && + check_config_missing three +' + +test_expect_success 'pull --set-upstream with valid URL sets upstream to URL' ' + clear_config master other other2 && + git checkout master && + url="file://'"$PWD"'" && + git pull --set-upstream "$url" && + check_config master "$url" HEAD && + check_config_missing other && + check_config_missing other2 +' + +test_expect_success 'pull --set-upstream with valid URL and branch sets branch' ' + clear_config master other other2 && + git checkout master && + url="file://'"$PWD"'" && + git pull --set-upstream "$url" master && + check_config master "$url" refs/heads/master && + check_config_missing other && + check_config_missing other2 +' + +test_done diff --git a/t/t5561-http-backend.sh b/t/t5561-http-backend.sh index 1c49054595..6eb0294978 100755 --- a/t/t5561-http-backend.sh +++ b/t/t5561-http-backend.sh @@ -132,5 +132,4 @@ test_expect_success 'server request log matches test results' ' check_access_log exp ' -stop_httpd test_done diff --git a/t/t5562-http-backend-content-length.sh b/t/t5562-http-backend-content-length.sh index 90d890d02f..f0f425b2cf 100755 --- a/t/t5562-http-backend-content-length.sh +++ b/t/t5562-http-backend-content-length.sh @@ -8,12 +8,12 @@ test_lazy_prereq GZIP 'gzip --version' verify_http_result() { # some fatal errors still produce status 200 # so check if there is the error message - if grep 'fatal:' act.err + if grep 'fatal:' act.err.$test_count then return 1 fi - if ! grep "Status" act.out >act + if ! grep "Status" act.out.$test_count >act then printf "Status: 200 OK\r\n" >act fi @@ -33,7 +33,7 @@ test_http_env() { REQUEST_METHOD=POST \ "$PERL_PATH" \ "$TEST_DIRECTORY"/t5562/invoke-with-content-length.pl \ - "$request_body" git http-backend >act.out 2>act.err + "$request_body" git http-backend >act.out.$test_count 2>act.err.$test_count } ssize_b100dots() { @@ -150,7 +150,7 @@ test_expect_success 'CONTENT_LENGTH overflow ssite_t' ' GIT_HTTP_EXPORT_ALL=TRUE \ REQUEST_METHOD=POST \ CONTENT_LENGTH="$NOT_FIT_IN_SSIZE" \ - git http-backend </dev/zero >/dev/null 2>err && + git http-backend </dev/null >/dev/null 2>err && grep "fatal:.*CONTENT_LENGTH" err ' @@ -161,7 +161,7 @@ test_expect_success 'empty CONTENT_LENGTH' ' GIT_HTTP_EXPORT_ALL=TRUE \ REQUEST_METHOD=GET \ CONTENT_LENGTH="" \ - git http-backend <empty_body >act.out 2>act.err && + git http-backend <empty_body >act.out.$test_count 2>act.err.$test_count && verify_http_result "200 OK" ' diff --git a/t/t5570-git-daemon.sh b/t/t5570-git-daemon.sh index 58ee787685..34487bbb8c 100755 --- a/t/t5570-git-daemon.sh +++ b/t/t5570-git-daemon.sh @@ -90,6 +90,7 @@ test_expect_success 'fetch notices corrupt pack' ' test_expect_success 'fetch notices corrupt idx' ' cp -R "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_pack.git "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_bad2.git && (cd "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_bad2.git && + rm -f objects/pack/multi-pack-index && p=$(ls objects/pack/pack-*.idx) && chmod u+w $p && printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc @@ -198,5 +199,4 @@ test_expect_success FAKENC 'hostname interpolation works after LF-stripping' ' test_cmp expect actual ' -stop_git_daemon test_done diff --git a/t/t5580-clone-push-unc.sh b/t/t5580-clone-push-unc.sh index 217adf3a63..b3c8a92450 100755 --- a/t/t5580-clone-push-unc.sh +++ b/t/t5580-clone-push-unc.sh @@ -62,4 +62,16 @@ test_expect_success MINGW 'remote nick cannot contain backslashes' ' test_i18ngrep ! "unable to access" err ' +test_expect_success 'unc alternates' ' + tree="$(git rev-parse HEAD:)" && + mkdir test-unc-alternate && + ( + cd test-unc-alternate && + git init && + test_must_fail git show $tree && + echo "$UNCPATH/.git/objects" >.git/objects/info/alternates && + git show $tree + ) +' + test_done diff --git a/t/t5581-http-curl-verbose.sh b/t/t5581-http-curl-verbose.sh index cd9283eeec..5129b0724f 100755 --- a/t/t5581-http-curl-verbose.sh +++ b/t/t5581-http-curl-verbose.sh @@ -23,6 +23,4 @@ test_expect_success 'failure in git-upload-pack is shown' ' grep "< HTTP/1.1 500 Intentional Breakage" curl_log ' -stop_httpd - test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index d6948cbdab..ad8c41176e 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -345,7 +345,7 @@ expect_ssh () { } test_expect_success 'clone myhost:src uses ssh' ' - git clone myhost:src ssh-clone && + GIT_TEST_PROTOCOL_VERSION=0 git clone myhost:src ssh-clone && expect_ssh myhost src ' @@ -356,12 +356,12 @@ test_expect_success !MINGW,!CYGWIN 'clone local path foo:bar' ' ' test_expect_success 'bracketed hostnames are still ssh' ' - git clone "[myhost:123]:src" ssh-bracket-clone && + GIT_TEST_PROTOCOL_VERSION=0 git clone "[myhost:123]:src" ssh-bracket-clone && expect_ssh "-p 123" myhost src ' test_expect_success 'OpenSSH variant passes -4' ' - git clone -4 "[myhost:123]:src" ssh-ipv4-clone && + GIT_TEST_PROTOCOL_VERSION=0 git clone -4 "[myhost:123]:src" ssh-ipv4-clone && expect_ssh "-4 -p 123" myhost src ' @@ -405,7 +405,7 @@ test_expect_success 'OpenSSH-like uplink is treated as ssh' ' test_when_finished "rm -f \"\$TRASH_DIRECTORY/uplink\"" && GIT_SSH="$TRASH_DIRECTORY/uplink" && test_when_finished "GIT_SSH=\"\$TRASH_DIRECTORY/ssh\$X\"" && - git clone "[myhost:123]:src" ssh-bracket-clone-sshlike-uplink && + GIT_TEST_PROTOCOL_VERSION=0 git clone "[myhost:123]:src" ssh-bracket-clone-sshlike-uplink && expect_ssh "-p 123" myhost src ' @@ -434,7 +434,6 @@ test_expect_success 'double quoted plink.exe in GIT_SSH_COMMAND' ' expect_ssh "-v -P 123" myhost src ' -SQ="'" test_expect_success 'single quoted plink.exe in GIT_SSH_COMMAND' ' copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink.exe" && GIT_SSH_COMMAND="$SQ$TRASH_DIRECTORY/plink.exe$SQ -v" \ @@ -444,14 +443,14 @@ test_expect_success 'single quoted plink.exe in GIT_SSH_COMMAND' ' test_expect_success 'GIT_SSH_VARIANT overrides plink detection' ' copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && - GIT_SSH_VARIANT=ssh \ - git clone "[myhost:123]:src" ssh-bracket-clone-variant-1 && + GIT_TEST_PROTOCOL_VERSION=0 GIT_SSH_VARIANT=ssh \ + git clone "[myhost:123]:src" ssh-bracket-clone-variant-1 && expect_ssh "-p 123" myhost src ' test_expect_success 'ssh.variant overrides plink detection' ' copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && - git -c ssh.variant=ssh \ + GIT_TEST_PROTOCOL_VERSION=0 git -c ssh.variant=ssh \ clone "[myhost:123]:src" ssh-bracket-clone-variant-2 && expect_ssh "-p 123" myhost src ' @@ -482,7 +481,7 @@ counter=0 # $3 path test_clone_url () { counter=$(($counter + 1)) - test_might_fail git clone "$1" tmp$counter && + test_might_fail env GIT_TEST_PROTOCOL_VERSION=0 git clone "$1" tmp$counter && shift && expect_ssh "$@" } @@ -611,10 +610,6 @@ test_expect_success 'GIT_TRACE_PACKFILE produces a usable pack' ' git -C replay.git index-pack -v --stdin <tmp.pack ' -hex2oct () { - perl -ne 'printf "\\%03o", hex for /../g' -} - test_expect_success 'clone on case-insensitive fs' ' git init icasefs && ( @@ -634,9 +629,8 @@ test_expect_success CASE_INSENSITIVE_FS 'colliding file detection' ' test_i18ngrep "the following paths have collided" icasefs/warning ' -partial_clone () { +partial_clone_server () { SERVER="$1" && - URL="$2" && rm -rf "$SERVER" client && test_create_repo "$SERVER" && @@ -646,14 +640,21 @@ partial_clone () { test_commit -C "$SERVER" two && HASH2=$(git hash-object "$SERVER/two.t") && test_config -C "$SERVER" uploadpack.allowfilter 1 && - test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 && + test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 +} +partial_clone () { + SERVER="$1" && + URL="$2" && + + partial_clone_server "${SERVER}" && git clone --filter=blob:limit=0 "$URL" client && git -C client fsck && # Ensure that unneeded blobs are not inadvertently fetched. - test_config -C client extensions.partialclone "not a remote" && + test_config -C client remote.origin.promisor "false" && + git -C client config --unset remote.origin.partialclonefilter && test_must_fail git -C client cat-file -e "$HASH1" && # But this blob was fetched, because clone performs an initial checkout @@ -664,6 +665,11 @@ test_expect_success 'partial clone' ' partial_clone server "file://$(pwd)/server" ' +test_expect_success 'partial clone with -o' ' + partial_clone_server server && + git clone -o blah --filter=blob:limit=0 "file://$(pwd)/server" client +' + test_expect_success 'partial clone: warn if server does not support object filtering' ' rm -rf server client && test_create_repo server && @@ -733,6 +739,7 @@ test_expect_success 'partial clone using HTTP' ' partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5604-clone-reference.sh b/t/t5604-clone-reference.sh index 4320082b1b..4894237ab8 100755 --- a/t/t5604-clone-reference.sh +++ b/t/t5604-clone-reference.sh @@ -221,4 +221,137 @@ test_expect_success 'clone, dissociate from alternates' ' ( cd C && git fsck ) ' +test_expect_success 'setup repo with garbage in objects/*' ' + git init S && + ( + cd S && + test_commit A && + + cd .git/objects && + >.some-hidden-file && + >some-file && + mkdir .some-hidden-dir && + >.some-hidden-dir/some-file && + >.some-hidden-dir/.some-dot-file && + mkdir some-dir && + >some-dir/some-file && + >some-dir/.some-dot-file + ) +' + +test_expect_success 'clone a repo with garbage in objects/*' ' + for option in --local --no-hardlinks --shared --dissociate + do + git clone $option S S$option || return 1 && + git -C S$option fsck || return 1 + done && + find S-* -name "*some*" | sort >actual && + cat >expected <<-EOF && + S--dissociate/.git/objects/.some-hidden-dir + S--dissociate/.git/objects/.some-hidden-dir/.some-dot-file + S--dissociate/.git/objects/.some-hidden-dir/some-file + S--dissociate/.git/objects/.some-hidden-file + S--dissociate/.git/objects/some-dir + S--dissociate/.git/objects/some-dir/.some-dot-file + S--dissociate/.git/objects/some-dir/some-file + S--dissociate/.git/objects/some-file + S--local/.git/objects/.some-hidden-dir + S--local/.git/objects/.some-hidden-dir/.some-dot-file + S--local/.git/objects/.some-hidden-dir/some-file + S--local/.git/objects/.some-hidden-file + S--local/.git/objects/some-dir + S--local/.git/objects/some-dir/.some-dot-file + S--local/.git/objects/some-dir/some-file + S--local/.git/objects/some-file + S--no-hardlinks/.git/objects/.some-hidden-dir + S--no-hardlinks/.git/objects/.some-hidden-dir/.some-dot-file + S--no-hardlinks/.git/objects/.some-hidden-dir/some-file + S--no-hardlinks/.git/objects/.some-hidden-file + S--no-hardlinks/.git/objects/some-dir + S--no-hardlinks/.git/objects/some-dir/.some-dot-file + S--no-hardlinks/.git/objects/some-dir/some-file + S--no-hardlinks/.git/objects/some-file + EOF + test_cmp expected actual +' + +test_expect_success SYMLINKS 'setup repo with manually symlinked or unknown files at objects/' ' + git init T && + ( + cd T && + git config gc.auto 0 && + test_commit A && + git gc && + test_commit B && + + cd .git/objects && + mv pack packs && + ln -s packs pack && + find ?? -type d >loose-dirs && + last_loose=$(tail -n 1 loose-dirs) && + mv $last_loose a-loose-dir && + ln -s a-loose-dir $last_loose && + first_loose=$(head -n 1 loose-dirs) && + rm -f loose-dirs && + + cd $first_loose && + obj=$(ls *) && + mv $obj ../an-object && + ln -s ../an-object $obj && + + cd ../ && + find . -type f | sort >../../../T.objects-files.raw && + find . -type l | sort >../../../T.objects-symlinks.raw && + echo unknown_content >unknown_file + ) && + git -C T fsck && + git -C T rev-list --all --objects >T.objects +' + + +test_expect_success SYMLINKS 'clone repo with symlinked or unknown files at objects/' ' + for option in --local --no-hardlinks --shared --dissociate + do + git clone $option T T$option || return 1 && + git -C T$option fsck || return 1 && + git -C T$option rev-list --all --objects >T$option.objects && + test_cmp T.objects T$option.objects && + ( + cd T$option/.git/objects && + find . -type f | sort >../../../T$option.objects-files.raw && + find . -type l | sort >../../../T$option.objects-symlinks.raw + ) + done && + + for raw in $(ls T*.raw) + do + sed -e "s!/../!/Y/!; s![0-9a-f]\{38,\}!Z!" -e "/commit-graph/d" \ + -e "/multi-pack-index/d" <$raw >$raw.de-sha || return 1 + done && + + cat >expected-files <<-EOF && + ./Y/Z + ./Y/Z + ./a-loose-dir/Z + ./an-object + ./Y/Z + ./info/packs + ./pack/pack-Z.idx + ./pack/pack-Z.pack + ./packs/pack-Z.idx + ./packs/pack-Z.pack + ./unknown_file + EOF + + for option in --local --no-hardlinks --dissociate + do + test_cmp expected-files T$option.objects-files.raw.de-sha || return 1 && + test_must_be_empty T$option.objects-symlinks.raw.de-sha || return 1 + done && + + echo ./info/alternates >expected-files && + test_cmp expected-files T--shared.objects-files.raw && + test_must_be_empty T--shared.objects-symlinks.raw +' + test_done diff --git a/t/t5607-clone-bundle.sh b/t/t5607-clone-bundle.sh index cf39e9e243..b7a3fdf02d 100755 --- a/t/t5607-clone-bundle.sh +++ b/t/t5607-clone-bundle.sh @@ -14,6 +14,12 @@ test_expect_success 'setup' ' git tag -d third ' +test_expect_success '"verify" needs a worktree' ' + git bundle create tip.bundle -1 master && + test_must_fail nongit git bundle verify ../tip.bundle 2>err && + test_i18ngrep "need a repository" err +' + test_expect_success 'annotated tags can be excluded by rev-list options' ' git bundle create bundle --all --since=7.Apr.2005.15:14:00.-0700 && git ls-remote bundle > output && @@ -77,4 +83,15 @@ test_expect_success 'failed bundle creation does not leave cruft' ' test_path_is_missing fail.bundle.lock ' +test_expect_success 'fetch SHA-1 from bundle' ' + test_create_repo foo && + test_commit -C foo x && + git -C foo bundle create tip.bundle -1 master && + git -C foo rev-parse HEAD >hash && + + # Exercise to ensure that fetching a SHA-1 from a bundle works with no + # errors + git fetch --no-tags foo/tip.bundle "$(cat hash)" +' + test_done diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh index 9643acb161..79f7b65f8c 100755 --- a/t/t5616-partial-clone.sh +++ b/t/t5616-partial-clone.sh @@ -42,8 +42,8 @@ test_expect_success 'do partial clone 1' ' test_cmp expect_1.oids observed.oids && test "$(git -C pc1 config --local core.repositoryformatversion)" = "1" && - test "$(git -C pc1 config --local extensions.partialclone)" = "origin" && - test "$(git -C pc1 config --local core.partialclonefilter)" = "blob:none" + test "$(git -C pc1 config --local remote.origin.promisor)" = "true" && + test "$(git -C pc1 config --local remote.origin.partialclonefilter)" = "blob:none" ' # checkout master to force dynamic object fetch of blobs at HEAD. @@ -208,6 +208,25 @@ test_expect_success 'use fsck before and after manually fetching a missing subtr test_cmp unique_types.expected unique_types.observed ' +test_expect_success 'implicitly construct combine: filter with repeated flags' ' + GIT_TRACE=$(pwd)/trace git clone --bare \ + --filter=blob:none --filter=tree:1 \ + "file://$(pwd)/srv.bare" pc2 && + grep "trace:.* git pack-objects .*--filter=combine:blob:none+tree:1" \ + trace && + git -C pc2 rev-list --objects --missing=allow-any HEAD >objects && + + # We should have gotten some root trees. + grep " $" objects && + # Should not have gotten any non-root trees or blobs. + ! grep " ." objects && + + xargs -n 1 git -C pc2 cat-file -t <objects >types && + sort -u types >unique_types.actual && + test_write_lines commit tree >unique_types.expected && + test_cmp unique_types.expected unique_types.actual +' + test_expect_success 'partial clone fetches blobs pointed to by refs even if normally filtered out' ' rm -rf src dst && git init src && @@ -241,14 +260,64 @@ test_expect_success 'fetch what is specified on CLI even if already promised' ' ! grep "?$(cat blob)" missing_after ' +test_expect_success 'setup src repo for sparse filter' ' + git init sparse-src && + git -C sparse-src config --local uploadpack.allowfilter 1 && + git -C sparse-src config --local uploadpack.allowanysha1inwant 1 && + test_commit -C sparse-src one && + test_commit -C sparse-src two && + echo /one.t >sparse-src/only-one && + git -C sparse-src add . && + git -C sparse-src commit -m "add sparse checkout files" +' + +test_expect_success 'partial clone with sparse filter succeeds' ' + rm -rf dst.git && + git clone --no-local --bare \ + --filter=sparse:oid=master:only-one \ + sparse-src dst.git && + ( + cd dst.git && + git rev-list --objects --missing=print HEAD >out && + grep "^$(git rev-parse HEAD:one.t)" out && + grep "^?$(git rev-parse HEAD:two.t)" out + ) +' + +test_expect_success 'partial clone with unresolvable sparse filter fails cleanly' ' + rm -rf dst.git && + test_must_fail git clone --no-local --bare \ + --filter=sparse:oid=master:no-such-name \ + sparse-src dst.git 2>err && + test_i18ngrep "unable to access sparse blob in .master:no-such-name" err && + test_must_fail git clone --no-local --bare \ + --filter=sparse:oid=master \ + sparse-src dst.git 2>err && + test_i18ngrep "unable to parse sparse filter data in" err +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd -# Converts bytes into a form suitable for inclusion in a sed command. For -# example, "printf 'ab\r\n' | hex_unpack" results in '\x61\x62\x0d\x0a'. -sed_escape () { - perl -e '$/ = undef; $input = <>; print unpack("H2" x length($input), $input)' | - sed 's/\(..\)/\\x\1/g' +# Converts bytes into their hexadecimal representation. For example, +# "printf 'ab\r\n' | hex_unpack" results in '61620d0a'. +hex_unpack () { + perl -e '$/ = undef; $input = <>; print unpack("H2" x length($input), $input)' +} + +# Inserts $1 at the start of the string and every 2 characters thereafter. +intersperse () { + sed 's/\(..\)/'$1'\1/g' +} + +# Create a one-time-sed command to replace the existing packfile with $1. +replace_packfile () { + # The protocol requires that the packfile be sent in sideband 1, hence + # the extra \x01 byte at the beginning. + printf "1,/packfile/!c %04x\\\\x01%s0000" \ + "$(($(wc -c <$1) + 5))" \ + "$(hex_unpack <$1 | intersperse '\\x')" \ + >"$HTTPD_ROOT_PATH/one-time-sed" } test_expect_success 'upon cloning, check that all refs point to objects' ' @@ -270,10 +339,7 @@ test_expect_success 'upon cloning, check that all refs point to objects' ' # Replace the existing packfile with the crafted one. The protocol # requires that the packfile be sent in sideband 1, hence the extra # \x01 byte at the beginning. - printf "1,/packfile/!c %04x\\\\x01%s0000" \ - "$(($(wc -c <incomplete.pack) + 5))" \ - "$(sed_escape <incomplete.pack)" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && + replace_packfile incomplete.pack && # Use protocol v2 because the sed command looks for the "packfile" # section header. @@ -313,10 +379,7 @@ test_expect_success 'when partial cloning, tolerate server not sending target of # Replace the existing packfile with the crafted one. The protocol # requires that the packfile be sent in sideband 1, hence the extra # \x01 byte at the beginning. - printf "1,/packfile/!c %04x\\\\x01%s0000" \ - "$(($(wc -c <incomplete.pack) + 5))" \ - "$(sed_escape <incomplete.pack)" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && + replace_packfile incomplete.pack && # Use protocol v2 because the sed command looks for the "packfile" # section header. @@ -331,6 +394,85 @@ test_expect_success 'when partial cloning, tolerate server not sending target of ! test -e "$HTTPD_ROOT_PATH/one-time-sed" ' -stop_httpd +test_expect_success 'tolerate server sending REF_DELTA against missing promisor objects' ' + SERVER="$HTTPD_DOCUMENT_ROOT_PATH/server" && + rm -rf "$SERVER" repo && + test_create_repo "$SERVER" && + test_config -C "$SERVER" uploadpack.allowfilter 1 && + test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 && + + # Create a commit with 2 blobs to be used as delta bases. + for i in $(test_seq 10) + do + echo "this is a line" >>"$SERVER/foo.txt" && + echo "this is another line" >>"$SERVER/have.txt" + done && + git -C "$SERVER" add foo.txt have.txt && + git -C "$SERVER" commit -m bar && + git -C "$SERVER" rev-parse HEAD:foo.txt >deltabase_missing && + git -C "$SERVER" rev-parse HEAD:have.txt >deltabase_have && + + # Clone. The client has deltabase_have but not deltabase_missing. + git -c protocol.version=2 clone --no-checkout \ + --filter=blob:none $HTTPD_URL/one_time_sed/server repo && + git -C repo hash-object -w -- "$SERVER/have.txt" && + + # Sanity check to ensure that the client does not have + # deltabase_missing. + git -C repo rev-list --objects --ignore-missing \ + -- $(cat deltabase_missing) >objlist && + test_line_count = 0 objlist && + + # Another commit. This commit will be fetched by the client. + echo "abcdefghijklmnopqrstuvwxyz" >>"$SERVER/foo.txt" && + echo "abcdefghijklmnopqrstuvwxyz" >>"$SERVER/have.txt" && + git -C "$SERVER" add foo.txt have.txt && + git -C "$SERVER" commit -m baz && + + # Pack a thin pack containing, among other things, HEAD:foo.txt + # delta-ed against HEAD^:foo.txt and HEAD:have.txt delta-ed against + # HEAD^:have.txt. + printf "%s\n--not\n%s\n" \ + $(git -C "$SERVER" rev-parse HEAD) \ + $(git -C "$SERVER" rev-parse HEAD^) | + git -C "$SERVER" pack-objects --thin --stdout >thin.pack && + + # Ensure that the pack contains one delta against HEAD^:foo.txt. Since + # the delta contains at least 26 novel characters, the size cannot be + # contained in 4 bits, so the object header will take up 2 bytes. The + # most significant nybble of the first byte is 0b1111 (0b1 to indicate + # that the header continues, and 0b111 to indicate REF_DELTA), followed + # by any 3 nybbles, then the OID of the delta base. + printf "f.,..%s" $(intersperse "," <deltabase_missing) >want && + hex_unpack <thin.pack | intersperse "," >have && + grep $(cat want) have && + + # Ensure that the pack contains one delta against HEAD^:have.txt, + # similar to the above. + printf "f.,..%s" $(intersperse "," <deltabase_have) >want && + hex_unpack <thin.pack | intersperse "," >have && + grep $(cat want) have && + + replace_packfile thin.pack && + + # Use protocol v2 because the sed command looks for the "packfile" + # section header. + test_config -C "$SERVER" protocol.version 2 && + + # Fetch the thin pack and ensure that index-pack is able to handle the + # REF_DELTA object with a missing promisor delta base. + GIT_TRACE_PACKET="$(pwd)/trace" git -C repo -c protocol.version=2 fetch && + + # Ensure that the missing delta base was directly fetched, but not the + # one that the client has. + grep "want $(cat deltabase_missing)" trace && + ! grep "want $(cat deltabase_have)" trace && + + # Ensure that the one-time-sed script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-sed" +' + +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5617-clone-submodules-remote.sh b/t/t5617-clone-submodules-remote.sh new file mode 100755 index 0000000000..37fcce9c40 --- /dev/null +++ b/t/t5617-clone-submodules-remote.sh @@ -0,0 +1,54 @@ +#!/bin/sh + +test_description='Test cloning repos with submodules using remote-tracking branches' + +. ./test-lib.sh + +pwd=$(pwd) + +test_expect_success 'setup' ' + git checkout -b master && + test_commit commit1 && + mkdir sub && + ( + cd sub && + git init && + test_commit subcommit1 && + git tag sub_when_added_to_super + ) && + git submodule add "file://$pwd/sub" sub && + git commit -m "add submodule" && + ( + cd sub && + test_commit subcommit2 + ) +' + +test_expect_success 'clone with --no-remote-submodules' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --no-remote-submodules "file://$pwd/." super_clone && + ( + cd super_clone/sub && + git diff --exit-code sub_when_added_to_super + ) +' + +test_expect_success 'clone with --remote-submodules' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --remote-submodules "file://$pwd/." super_clone && + ( + cd super_clone/sub && + git diff --exit-code remotes/origin/master + ) +' + +test_expect_success 'check the default is --no-remote-submodules' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules "file://$pwd/." super_clone && + ( + cd super_clone/sub && + git diff --exit-code sub_when_added_to_super + ) +' + +test_done diff --git a/t/t5618-alternate-refs.sh b/t/t5618-alternate-refs.sh new file mode 100755 index 0000000000..3353216f09 --- /dev/null +++ b/t/t5618-alternate-refs.sh @@ -0,0 +1,60 @@ +#!/bin/sh + +test_description='test handling of --alternate-refs traversal' +. ./test-lib.sh + +# Avoid test_commit because we want a specific and known set of refs: +# +# base -- one +# \ \ +# two -- merged +# +# where "one" and "two" are on separate refs, and "merged" is available only in +# the dependent child repository. +test_expect_success 'set up local refs' ' + git checkout -b one && + test_tick && + git commit --allow-empty -m base && + test_tick && + git commit --allow-empty -m one && + git checkout -b two HEAD^ && + test_tick && + git commit --allow-empty -m two +' + +# We'll enter the child repository after it's set up since that's where +# all of the subsequent tests will want to run (and it's easy to forget a +# "-C child" and get nonsense results). +test_expect_success 'set up shared clone' ' + git clone -s . child && + cd child && + git merge origin/one +' + +test_expect_success 'rev-list --alternate-refs' ' + git rev-list --remotes=origin >expect && + git rev-list --alternate-refs >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list --not --alternate-refs' ' + git rev-parse HEAD >expect && + git rev-list HEAD --not --alternate-refs >actual && + test_cmp expect actual +' + +test_expect_success 'limiting with alternateRefsPrefixes' ' + test_config core.alternateRefsPrefixes refs/heads/one && + git rev-list origin/one >expect && + git rev-list --alternate-refs >actual && + test_cmp expect actual +' + +test_expect_success 'log --source shows .alternate marker' ' + git log --oneline --source --remotes=origin >expect.orig && + sed "s/origin.* /.alternate /" <expect.orig >expect && + git log --oneline --source --alternate-refs >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t5700-protocol-v1.sh b/t/t5700-protocol-v1.sh index ba86a44eb1..2571eb90b7 100755 --- a/t/t5700-protocol-v1.sh +++ b/t/t5700-protocol-v1.sh @@ -4,6 +4,9 @@ test_description='test git wire-protocol transition' TEST_NO_CREATE_REPO=1 +# This is a protocol-specific test. +GIT_TEST_PROTOCOL_VERSION= + . ./test-lib.sh # Test protocol v1 with 'git://' transport @@ -289,6 +292,7 @@ test_expect_success 'push with http:// using protocol v1' ' grep "git< version 1" log ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5701-git-serve.sh b/t/t5701-git-serve.sh index fe45bf828d..ffb9613885 100755 --- a/t/t5701-git-serve.sh +++ b/t/t5701-git-serve.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='test git-serve and server commands' +test_description='test protocol v2 server commands' . ./test-lib.sh @@ -14,7 +14,8 @@ test_expect_success 'test capability advertisement' ' 0000 EOF - GIT_TEST_SIDEBAND_ALL=0 git serve --advertise-capabilities >out && + GIT_TEST_SIDEBAND_ALL=0 test-tool serve-v2 \ + --advertise-capabilities >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -24,11 +25,11 @@ test_expect_success 'stateless-rpc flag does not list capabilities' ' test-tool pkt-line pack >in <<-EOF && 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && test_must_be_empty out && # EOF - git serve --stateless-rpc >out && + test-tool serve-v2 --stateless-rpc >out && test_must_be_empty out ' @@ -37,7 +38,7 @@ test_expect_success 'request invalid capability' ' foobar 0000 EOF - test_must_fail git serve --stateless-rpc 2>err <in && + test_must_fail test-tool serve-v2 --stateless-rpc 2>err <in && test_i18ngrep "unknown capability" err ' @@ -46,7 +47,7 @@ test_expect_success 'request with no command' ' agent=git/test 0000 EOF - test_must_fail git serve --stateless-rpc 2>err <in && + test_must_fail test-tool serve-v2 --stateless-rpc 2>err <in && test_i18ngrep "no command requested" err ' @@ -56,7 +57,7 @@ test_expect_success 'request invalid command' ' agent=git/test 0000 EOF - test_must_fail git serve --stateless-rpc 2>err <in && + test_must_fail test-tool serve-v2 --stateless-rpc 2>err <in && test_i18ngrep "invalid command" err ' @@ -87,7 +88,7 @@ test_expect_success 'basics of ls-refs' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -107,7 +108,7 @@ test_expect_success 'basic ref-prefixes' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -127,7 +128,7 @@ test_expect_success 'refs/heads prefix' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -148,7 +149,7 @@ test_expect_success 'peel parameter' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -169,7 +170,7 @@ test_expect_success 'symrefs parameter' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -189,7 +190,7 @@ test_expect_success 'sending server-options' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -204,7 +205,10 @@ test_expect_success 'unexpected lines are not allowed in fetch request' ' 0000 EOF - test_must_fail git -C server serve --stateless-rpc <in >/dev/null 2>err && + ( + cd server && + test_must_fail test-tool serve-v2 --stateless-rpc + ) <in >/dev/null 2>err && grep "unexpected line: .this-is-not-a-command." err ' diff --git a/t/t5702-protocol-v2.sh b/t/t5702-protocol-v2.sh index db4ae09f2f..ae9175cedf 100755 --- a/t/t5702-protocol-v2.sh +++ b/t/t5702-protocol-v2.sh @@ -182,6 +182,13 @@ test_expect_success 'server-options are sent when using ls-remote' ' grep "server-option=world" log ' +test_expect_success 'warn if using server-option with ls-remote with legacy protocol' ' + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 git -c protocol.version=0 \ + ls-remote -o hello -o world "file://$(pwd)/file_parent" master 2>err && + + test_i18ngrep "see protocol.version in" err && + test_i18ngrep "server options require protocol version 2 or later" err +' test_expect_success 'clone with file:// using protocol v2' ' test_when_finished "rm -f log" && @@ -251,6 +258,40 @@ test_expect_success 'server-options are sent when fetching' ' grep "server-option=world" log ' +test_expect_success 'warn if using server-option with fetch with legacy protocol' ' + test_when_finished "rm -rf temp_child" && + + git init temp_child && + + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 git -C temp_child -c protocol.version=0 \ + fetch -o hello -o world "file://$(pwd)/file_parent" master 2>err && + + test_i18ngrep "see protocol.version in" err && + test_i18ngrep "server options require protocol version 2 or later" err +' + +test_expect_success 'server-options are sent when cloning' ' + test_when_finished "rm -rf log myclone" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + clone --server-option=hello --server-option=world \ + "file://$(pwd)/file_parent" myclone && + + grep "server-option=hello" log && + grep "server-option=world" log +' + +test_expect_success 'warn if using server-option with clone with legacy protocol' ' + test_when_finished "rm -rf myclone" && + + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 git -c protocol.version=0 \ + clone --server-option=hello --server-option=world \ + "file://$(pwd)/file_parent" myclone 2>err && + + test_i18ngrep "see protocol.version in" err && + test_i18ngrep "server options require protocol version 2 or later" err +' + test_expect_success 'upload-pack respects config using protocol v2' ' git init server && write_script server/.git/hook <<-\EOF && @@ -359,12 +400,13 @@ test_expect_success 'even with handcrafted request, filter does not work if not 0000 EOF - test_must_fail git -C server serve --stateless-rpc <in >/dev/null 2>err && + test_must_fail test-tool -C server serve-v2 --stateless-rpc \ + <in >/dev/null 2>err && grep "unexpected line: .filter blob:none." err && # Exercise to ensure that if advertised, filter works git -C server config uploadpack.allowfilter 1 && - git -C server serve --stateless-rpc <in >/dev/null + test-tool -C server serve-v2 --stateless-rpc <in >/dev/null ' test_expect_success 'default refspec is used to filter ref when fetchcing' ' @@ -457,10 +499,7 @@ test_expect_success 'upload-pack respects client shallows' ' # Add extra commits to the client so that the whole fetch takes more # than 1 request (due to negotiation) - for i in $(test_seq 1 32) - do - test_commit -C client c$i - done && + test_commit_bulk -C client --id=c 32 && git -C server checkout -b newbranch base && test_commit -C server client_wants && @@ -542,7 +581,38 @@ test_expect_success 'clone with http:// using protocol v2' ' # Client requested to use protocol v2 grep "Git-Protocol: version=2" log && # Server responded using protocol v2 - grep "git< version 2" log + grep "git< version 2" log && + # Verify that the chunked encoding sending codepath is NOT exercised + ! grep "Send header: Transfer-Encoding: chunked" log +' + +test_expect_success 'clone big repository with http:// using protocol v2' ' + test_when_finished "rm -f log" && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/big" && + # Ensure that the list of wants is greater than http.postbuffer below + for i in $(test_seq 1 1500) + do + # do not use here-doc, because it requires a process + # per loop iteration + echo "commit refs/heads/too-many-refs-$i" && + echo "committer git <git@example.com> $i +0000" && + echo "data 0" && + echo "M 644 inline bla.txt" && + echo "data 4" && + echo "bla" + done | git -C "$HTTPD_DOCUMENT_ROOT_PATH/big" fast-import && + + GIT_TRACE_PACKET="$(pwd)/log" GIT_TRACE_CURL="$(pwd)/log" git \ + -c protocol.version=2 -c http.postbuffer=65536 \ + clone "$HTTPD_URL/smart/big" big_child && + + # Client requested to use protocol v2 + grep "Git-Protocol: version=2" log && + # Server responded using protocol v2 + grep "git< version 2" log && + # Verify that the chunked encoding sending codepath is exercised + grep "Send header: Transfer-Encoding: chunked" log ' test_expect_success 'fetch with http:// using protocol v2' ' @@ -561,6 +631,19 @@ test_expect_success 'fetch with http:// using protocol v2' ' grep "git< version 2" log ' +test_expect_success 'fetch with http:// by hash without tag following with protocol v2 does not list refs' ' + test_when_finished "rm -f log" && + + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two_a && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" rev-parse two_a >two_a_hash && + + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + fetch --no-tags origin $(cat two_a_hash) && + + grep "fetch< version 2" log && + ! grep "fetch> command=ls-refs" log +' + test_expect_success 'fetch from namespaced repo respects namespaces' ' test_when_finished "rm -f log" && @@ -638,10 +721,7 @@ test_expect_success 'when server does not send "ready", expect FLUSH' ' # Create many commits to extend the negotiation phase across multiple # requests, so that the server does not send "ready" in the first # request. - for i in $(test_seq 1 32) - do - test_commit -C http_child c$i - done && + test_commit_bulk -C http_child --id=c 32 && # After the acknowledgments section, pretend that a DELIM # (0001) was sent instead of a FLUSH (0000). @@ -656,6 +736,7 @@ test_expect_success 'when server does not send "ready", expect FLUSH' ' test_i18ngrep "expected no other sections to be sent after no .ready." err ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5703-upload-pack-ref-in-want.sh b/t/t5703-upload-pack-ref-in-want.sh index f87b2f6df3..3a2c143c6d 100755 --- a/t/t5703-upload-pack-ref-in-want.sh +++ b/t/t5703-upload-pack-ref-in-want.sh @@ -48,15 +48,15 @@ test_expect_success 'setup repository' ' ' test_expect_success 'config controls ref-in-want advertisement' ' - git serve --advertise-capabilities >out && + test-tool serve-v2 --advertise-capabilities >out && ! grep -a ref-in-want out && git config uploadpack.allowRefInWant false && - git serve --advertise-capabilities >out && + test-tool serve-v2 --advertise-capabilities >out && ! grep -a ref-in-want out && git config uploadpack.allowRefInWant true && - git serve --advertise-capabilities >out && + test-tool serve-v2 --advertise-capabilities >out && grep -a ref-in-want out ' @@ -70,7 +70,7 @@ test_expect_success 'invalid want-ref line' ' 0000 EOF - test_must_fail git serve --stateless-rpc 2>out <in && + test_must_fail test-tool serve-v2 --stateless-rpc 2>out <in && grep "unknown ref" out ' @@ -90,7 +90,7 @@ test_expect_success 'basic want-ref' ' 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && check_output ' @@ -112,7 +112,7 @@ test_expect_success 'multiple want-ref lines' ' 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && check_output ' @@ -133,7 +133,7 @@ test_expect_success 'mix want and want-ref' ' 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && check_output ' @@ -153,112 +153,10 @@ test_expect_success 'want-ref with ref we already have commit for' ' 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && check_output ' -. "$TEST_DIRECTORY"/lib-httpd.sh -start_httpd - -REPO="$HTTPD_DOCUMENT_ROOT_PATH/repo" -LOCAL_PRISTINE="$(pwd)/local_pristine" - -test_expect_success 'setup repos for change-while-negotiating test' ' - ( - git init "$REPO" && - cd "$REPO" && - >.git/git-daemon-export-ok && - test_commit m1 && - git tag -d m1 && - - # Local repo with many commits (so that negotiation will take - # more than 1 request/response pair) - git clone "http://127.0.0.1:$LIB_HTTPD_PORT/smart/repo" "$LOCAL_PRISTINE" && - cd "$LOCAL_PRISTINE" && - git checkout -b side && - for i in $(test_seq 1 33); do test_commit s$i; done && - - # Add novel commits to upstream - git checkout master && - cd "$REPO" && - test_commit m2 && - test_commit m3 && - git tag -d m2 m3 - ) && - git -C "$LOCAL_PRISTINE" remote set-url origin "http://127.0.0.1:$LIB_HTTPD_PORT/one_time_sed/repo" && - git -C "$LOCAL_PRISTINE" config protocol.version 2 -' - -inconsistency () { - # Simulate that the server initially reports $2 as the ref - # corresponding to $1, and after that, $1 as the ref corresponding to - # $1. This corresponds to the real-life situation where the server's - # repository appears to change during negotiation, for example, when - # different servers in a load-balancing arrangement serve (stateless) - # RPCs during a single negotiation. - printf "s/%s/%s/" \ - $(git -C "$REPO" rev-parse $1 | tr -d "\n") \ - $(git -C "$REPO" rev-parse $2 | tr -d "\n") \ - >"$HTTPD_ROOT_PATH/one-time-sed" -} - -test_expect_success 'server is initially ahead - no ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant false && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - inconsistency master 1234567890123456789012345678901234567890 && - test_must_fail git -C local fetch 2>err && - test_i18ngrep "fatal: remote error: upload-pack: not our ref" err -' - -test_expect_success 'server is initially ahead - ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant true && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - inconsistency master 1234567890123456789012345678901234567890 && - git -C local fetch && - - git -C "$REPO" rev-parse --verify master >expected && - git -C local rev-parse --verify refs/remotes/origin/master >actual && - test_cmp expected actual -' - -test_expect_success 'server is initially behind - no ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant false && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - inconsistency master "master^" && - git -C local fetch && - - git -C "$REPO" rev-parse --verify "master^" >expected && - git -C local rev-parse --verify refs/remotes/origin/master >actual && - test_cmp expected actual -' - -test_expect_success 'server is initially behind - ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant true && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - inconsistency master "master^" && - git -C local fetch && - - git -C "$REPO" rev-parse --verify "master" >expected && - git -C local rev-parse --verify refs/remotes/origin/master >actual && - test_cmp expected actual -' - -test_expect_success 'server loses a ref - ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant true && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - echo "s/master/raster/" >"$HTTPD_ROOT_PATH/one-time-sed" && - test_must_fail git -C local fetch 2>err && - - test_i18ngrep "fatal: remote error: unknown ref refs/heads/raster" err -' - -stop_httpd - REPO="$(pwd)/repo" LOCAL_PRISTINE="$(pwd)/local_pristine" @@ -289,7 +187,7 @@ test_expect_success 'setup repos for fetching with ref-in-want tests' ' git clone "file://$REPO" "$LOCAL_PRISTINE" && cd "$LOCAL_PRISTINE" && git checkout -b side && - for i in $(test_seq 1 33); do test_commit s$i; done && + test_commit_bulk --id=s 33 && # Add novel commits to upstream git checkout master && @@ -374,4 +272,108 @@ test_expect_success 'fetching with wildcard that matches multiple refs' ' grep "want-ref refs/heads/o/bar" log ' +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +REPO="$HTTPD_DOCUMENT_ROOT_PATH/repo" +LOCAL_PRISTINE="$(pwd)/local_pristine" + +test_expect_success 'setup repos for change-while-negotiating test' ' + ( + git init "$REPO" && + cd "$REPO" && + >.git/git-daemon-export-ok && + test_commit m1 && + git tag -d m1 && + + # Local repo with many commits (so that negotiation will take + # more than 1 request/response pair) + rm -rf "$LOCAL_PRISTINE" && + git clone "http://127.0.0.1:$LIB_HTTPD_PORT/smart/repo" "$LOCAL_PRISTINE" && + cd "$LOCAL_PRISTINE" && + git checkout -b side && + test_commit_bulk --id=s 33 && + + # Add novel commits to upstream + git checkout master && + cd "$REPO" && + test_commit m2 && + test_commit m3 && + git tag -d m2 m3 + ) && + git -C "$LOCAL_PRISTINE" remote set-url origin "http://127.0.0.1:$LIB_HTTPD_PORT/one_time_sed/repo" && + git -C "$LOCAL_PRISTINE" config protocol.version 2 +' + +inconsistency () { + # Simulate that the server initially reports $2 as the ref + # corresponding to $1, and after that, $1 as the ref corresponding to + # $1. This corresponds to the real-life situation where the server's + # repository appears to change during negotiation, for example, when + # different servers in a load-balancing arrangement serve (stateless) + # RPCs during a single negotiation. + printf "s/%s/%s/" \ + $(git -C "$REPO" rev-parse $1 | tr -d "\n") \ + $(git -C "$REPO" rev-parse $2 | tr -d "\n") \ + >"$HTTPD_ROOT_PATH/one-time-sed" +} + +test_expect_success 'server is initially ahead - no ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant false && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master 1234567890123456789012345678901234567890 && + test_must_fail git -C local fetch 2>err && + test_i18ngrep "fatal: remote error: upload-pack: not our ref" err +' + +test_expect_success 'server is initially ahead - ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant true && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master 1234567890123456789012345678901234567890 && + git -C local fetch && + + git -C "$REPO" rev-parse --verify master >expected && + git -C local rev-parse --verify refs/remotes/origin/master >actual && + test_cmp expected actual +' + +test_expect_success 'server is initially behind - no ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant false && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master "master^" && + git -C local fetch && + + git -C "$REPO" rev-parse --verify "master^" >expected && + git -C local rev-parse --verify refs/remotes/origin/master >actual && + test_cmp expected actual +' + +test_expect_success 'server is initially behind - ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant true && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master "master^" && + git -C local fetch && + + git -C "$REPO" rev-parse --verify "master" >expected && + git -C local rev-parse --verify refs/remotes/origin/master >actual && + test_cmp expected actual +' + +test_expect_success 'server loses a ref - ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant true && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + echo "s/master/raster/" >"$HTTPD_ROOT_PATH/one-time-sed" && + test_must_fail git -C local fetch 2>err && + + test_i18ngrep "fatal: remote error: unknown ref refs/heads/raster" err +' + +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. + test_done diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh index aaaa722cca..2d6c4a281e 100755 --- a/t/t5801-remote-helpers.sh +++ b/t/t5801-remote-helpers.sh @@ -8,6 +8,8 @@ test_description='Test remote-helper import and export commands' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-gpg.sh +PATH="$TEST_DIRECTORY/t5801:$PATH" + compare_refs() { git --git-dir="$1/.git" rev-parse --verify $2 >expect && git --git-dir="$3/.git" rev-parse --verify $4 >actual && @@ -124,7 +126,7 @@ test_expect_success 'forced push' ' ' test_expect_success 'cloning without refspec' ' - GIT_REMOTE_TESTGIT_REFSPEC="" \ + GIT_REMOTE_TESTGIT_NOREFSPEC=1 \ git clone "testgit::${PWD}/server" local2 2>error && test_i18ngrep "this remote helper should implement refspec capability" error && compare_refs local2 HEAD server HEAD @@ -133,7 +135,7 @@ test_expect_success 'cloning without refspec' ' test_expect_success 'pulling without refspecs' ' (cd local2 && git reset --hard && - GIT_REMOTE_TESTGIT_REFSPEC="" git pull 2>../error) && + GIT_REMOTE_TESTGIT_NOREFSPEC=1 git pull 2>../error) && test_i18ngrep "this remote helper should implement refspec capability" error && compare_refs local2 HEAD server HEAD ' @@ -143,8 +145,8 @@ test_expect_success 'pushing without refspecs' ' (cd local2 && echo content >>file && git commit -a -m ten && - GIT_REMOTE_TESTGIT_REFSPEC="" && - export GIT_REMOTE_TESTGIT_REFSPEC && + GIT_REMOTE_TESTGIT_NOREFSPEC=1 && + export GIT_REMOTE_TESTGIT_NOREFSPEC && test_must_fail git push 2>../error) && test_i18ngrep "remote-helper doesn.t support push; refspec needed" error ' @@ -301,4 +303,14 @@ test_expect_success 'fetch url' ' compare_refs server HEAD local FETCH_HEAD ' +test_expect_success 'fetch tag' ' + (cd server && + git tag v1.0 + ) && + (cd local && + git fetch + ) && + compare_refs local v1.0 server v1.0 +' + test_done diff --git a/t/t5801/git-remote-testgit b/t/t5801/git-remote-testgit new file mode 100755 index 0000000000..6b9f0b5dc7 --- /dev/null +++ b/t/t5801/git-remote-testgit @@ -0,0 +1,151 @@ +#!/bin/sh +# Copyright (c) 2012 Felipe Contreras + +# The first argument can be a url when the fetch/push command was a url +# instead of a configured remote. In this case, use a generic alias. +if test "$1" = "testgit::$2"; then + alias=_ +else + alias=$1 +fi +url=$2 + +dir="$GIT_DIR/testgit/$alias" + +h_refspec="refs/heads/*:refs/testgit/$alias/heads/*" +t_refspec="refs/tags/*:refs/testgit/$alias/tags/*" + +if test -n "$GIT_REMOTE_TESTGIT_NOREFSPEC" +then + h_refspec="" + t_refspec="" +fi + +GIT_DIR="$url/.git" +export GIT_DIR + +force= + +mkdir -p "$dir" + +if test -z "$GIT_REMOTE_TESTGIT_NO_MARKS" +then + gitmarks="$dir/git.marks" + testgitmarks="$dir/testgit.marks" + test -e "$gitmarks" || >"$gitmarks" + test -e "$testgitmarks" || >"$testgitmarks" +fi + +while read line +do + case $line in + capabilities) + echo 'import' + echo 'export' + test -n "$h_refspec" && echo "refspec $h_refspec" + test -n "$t_refspec" && echo "refspec $t_refspec" + if test -n "$gitmarks" + then + echo "*import-marks $gitmarks" + echo "*export-marks $gitmarks" + fi + test -n "$GIT_REMOTE_TESTGIT_SIGNED_TAGS" && echo "signed-tags" + test -n "$GIT_REMOTE_TESTGIT_NO_PRIVATE_UPDATE" && echo "no-private-update" + echo 'option' + echo + ;; + list) + git for-each-ref --format='? %(refname)' 'refs/heads/' 'refs/tags/' + head=$(git symbolic-ref HEAD) + echo "@$head HEAD" + echo + ;; + import*) + # read all import lines + while true + do + ref="${line#* }" + refs="$refs $ref" + read line + test "${line%% *}" != "import" && break + done + + if test -n "$gitmarks" + then + echo "feature import-marks=$gitmarks" + echo "feature export-marks=$gitmarks" + fi + + if test -n "$GIT_REMOTE_TESTGIT_FAILURE" + then + echo "feature done" + exit 1 + fi + + echo "feature done" + git fast-export \ + ${h_refspec:+"--refspec=$h_refspec"} \ + ${t_refspec:+"--refspec=$t_refspec"} \ + ${testgitmarks:+"--import-marks=$testgitmarks"} \ + ${testgitmarks:+"--export-marks=$testgitmarks"} \ + $refs + echo "done" + ;; + export) + if test -n "$GIT_REMOTE_TESTGIT_FAILURE" + then + # consume input so fast-export doesn't get SIGPIPE; + # git would also notice that case, but we want + # to make sure we are exercising the later + # error checks + while read line; do + test "done" = "$line" && break + done + exit 1 + fi + + before=$(git for-each-ref --format=' %(refname) %(objectname) ') + + git fast-import \ + ${force:+--force} \ + ${testgitmarks:+"--import-marks=$testgitmarks"} \ + ${testgitmarks:+"--export-marks=$testgitmarks"} \ + --quiet + + # figure out which refs were updated + git for-each-ref --format='%(refname) %(objectname)' | + while read ref a + do + case "$before" in + *" $ref $a "*) + continue ;; # unchanged + esac + if test -z "$GIT_REMOTE_TESTGIT_PUSH_ERROR" + then + echo "ok $ref" + else + echo "error $ref $GIT_REMOTE_TESTGIT_PUSH_ERROR" + fi + done + + echo + ;; + option\ *) + read cmd opt val <<-EOF + $line + EOF + case $opt in + force) + test $val = "true" && force="true" || force= + echo "ok" + ;; + *) + echo "unsupported" + ;; + esac + ;; + '') + exit + ;; + esac +done diff --git a/t/t5812-proto-disable-http.sh b/t/t5812-proto-disable-http.sh index 872788ac8c..af8772fada 100755 --- a/t/t5812-proto-disable-http.sh +++ b/t/t5812-proto-disable-http.sh @@ -34,5 +34,4 @@ test_expect_success 'http can be limited to from-user' ' clone "$HTTPD_URL/smart-redir-perm/repo.git" redir.git ' -stop_httpd test_done diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh index 0507999729..b8cf82349b 100755 --- a/t/t6000-rev-list-misc.sh +++ b/t/t6000-rev-list-misc.sh @@ -48,6 +48,26 @@ test_expect_success 'rev-list --objects with pathspecs and copied files' ' ! grep one output ' +test_expect_success 'rev-list --objects --no-object-names has no space/names' ' + git rev-list --objects --no-object-names HEAD >output && + ! grep wanted_file output && + ! grep unwanted_file output && + ! grep " " output +' + +test_expect_success 'rev-list --objects --no-object-names works with cat-file' ' + git rev-list --objects --no-object-names --all >list-output && + git cat-file --batch-check <list-output >cat-output && + ! grep missing cat-output +' + +test_expect_success '--no-object-names and --object-names are last-one-wins' ' + git rev-list --objects --no-object-names --object-names --all >output && + grep wanted_file output && + git rev-list --objects --object-names --no-object-names --all >output && + ! grep wanted_file output +' + test_expect_success 'rev-list A..B and rev-list ^A B are the same' ' git commit --allow-empty -m another && git tag -a -m "annotated" v1.0 && @@ -120,4 +140,12 @@ test_expect_success '--header shows a NUL after each commit' ' test_cmp expect actual ' +test_expect_success 'rev-list --end-of-options' ' + git update-ref refs/heads/--output=yikes HEAD && + git rev-list --end-of-options --output=yikes >actual && + test_path_is_missing yikes && + git rev-list HEAD >expect && + test_cmp expect actual +' + test_done diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index da113d975b..cfb74d0e03 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -501,9 +501,8 @@ test_expect_success 'reflog identity' ' ' test_expect_success 'oneline with empty message' ' - git commit -m "dummy" --allow-empty && - git commit -m "dummy" --allow-empty && - git filter-branch --msg-filter "sed -e s/dummy//" HEAD^^.. && + git commit --allow-empty --cleanup=verbatim -m "$LF" && + git commit --allow-empty --allow-empty-message && git rev-list --oneline HEAD >test.txt && test_line_count = 5 test.txt && git rev-list --oneline --graph HEAD >testg.txt && diff --git a/t/t6011-rev-list-with-bad-commit.sh b/t/t6011-rev-list-with-bad-commit.sh index 545b461e51..bad02cf5b8 100755 --- a/t/t6011-rev-list-with-bad-commit.sh +++ b/t/t6011-rev-list-with-bad-commit.sh @@ -42,7 +42,7 @@ test_expect_success 'corrupt second commit object' \ ' test_expect_success 'rev-list should fail' ' - test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git rev-list --all > /dev/null + test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git -c core.commitGraph=false rev-list --all > /dev/null ' test_expect_success 'git repack _MUST_ fail' \ diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index 55835ee4a4..bdc42e9440 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -615,6 +615,7 @@ test_expect_success 'broken branch creation' ' git add missing/MISSING && git commit -m "6(broken): Added file that will be deleted" && git tag BROKEN_HASH6 && + deleted=$(git rev-parse --verify HEAD:missing) && add_line_into_file "7(broken): second line on a broken branch" hello2 && git tag BROKEN_HASH7 && add_line_into_file "8(broken): third line on a broken branch" hello2 && @@ -622,12 +623,12 @@ test_expect_success 'broken branch creation' ' git rm missing/MISSING && git commit -m "9(broken): Remove missing file" && git tag BROKEN_HASH9 && - rm .git/objects/39/f7e61a724187ab767d2e08442d9b6b9dab587d + rm .git/objects/$(test_oid_to_path $deleted) ' echo "" > expected.ok cat > expected.missing-tree.default <<EOF -fatal: unable to read tree 39f7e61a724187ab767d2e08442d9b6b9dab587d +fatal: unable to read tree $deleted EOF test_expect_success 'bisect fails if tree is broken on start commit' ' @@ -681,7 +682,7 @@ test_expect_success 'bisect: --no-checkout - target in breakage' ' check_same BROKEN_HASH6 BISECT_HEAD && git bisect bad BISECT_HEAD && check_same BROKEN_HASH5 BISECT_HEAD && - git bisect good BISECT_HEAD && + test_must_fail git bisect good BISECT_HEAD && check_same BROKEN_HASH6 bisect/bad && git bisect reset ' @@ -692,7 +693,7 @@ test_expect_success 'bisect: --no-checkout - target after breakage' ' check_same BROKEN_HASH6 BISECT_HEAD && git bisect good BISECT_HEAD && check_same BROKEN_HASH8 BISECT_HEAD && - git bisect good BISECT_HEAD && + test_must_fail git bisect good BISECT_HEAD && check_same BROKEN_HASH9 bisect/bad && git bisect reset ' @@ -701,7 +702,7 @@ test_expect_success 'bisect: demonstrate identification of damage boundary' " git bisect reset && git checkout broken && git bisect start broken master --no-checkout && - git bisect run \"\$SHELL_PATH\" -c ' + test_must_fail git bisect run \"\$SHELL_PATH\" -c ' GOOD=\$(git for-each-ref \"--format=%(objectname)\" refs/bisect/good-*) && git rev-list --objects BISECT_HEAD --not \$GOOD >tmp.\$\$ && git pack-objects --stdout >/dev/null < tmp.\$\$ @@ -713,12 +714,12 @@ test_expect_success 'bisect: demonstrate identification of damage boundary' " " cat > expected.bisect-log <<EOF -# bad: [32a594a3fdac2d57cf6d02987e30eec68511498c] Add <4: Ciao for now> into <hello>. -# good: [7b7f204a749c3125d5224ed61ea2ae1187ad046f] Add <2: A new day for git> into <hello>. -git bisect start '32a594a3fdac2d57cf6d02987e30eec68511498c' '7b7f204a749c3125d5224ed61ea2ae1187ad046f' -# good: [3de952f2416b6084f557ec417709eac740c6818c] Add <3: Another new day for git> into <hello>. -git bisect good 3de952f2416b6084f557ec417709eac740c6818c -# first bad commit: [32a594a3fdac2d57cf6d02987e30eec68511498c] Add <4: Ciao for now> into <hello>. +# bad: [$HASH4] Add <4: Ciao for now> into <hello>. +# good: [$HASH2] Add <2: A new day for git> into <hello>. +git bisect start '$HASH4' '$HASH2' +# good: [$HASH3] Add <3: Another new day for git> into <hello>. +git bisect good $HASH3 +# first bad commit: [$HASH4] Add <4: Ciao for now> into <hello>. EOF test_expect_success 'bisect log: successful result' ' @@ -731,14 +732,14 @@ test_expect_success 'bisect log: successful result' ' ' cat > expected.bisect-skip-log <<EOF -# bad: [32a594a3fdac2d57cf6d02987e30eec68511498c] Add <4: Ciao for now> into <hello>. -# good: [7b7f204a749c3125d5224ed61ea2ae1187ad046f] Add <2: A new day for git> into <hello>. -git bisect start '32a594a3fdac2d57cf6d02987e30eec68511498c' '7b7f204a749c3125d5224ed61ea2ae1187ad046f' -# skip: [3de952f2416b6084f557ec417709eac740c6818c] Add <3: Another new day for git> into <hello>. -git bisect skip 3de952f2416b6084f557ec417709eac740c6818c +# bad: [$HASH4] Add <4: Ciao for now> into <hello>. +# good: [$HASH2] Add <2: A new day for git> into <hello>. +git bisect start '$HASH4' '$HASH2' +# skip: [$HASH3] Add <3: Another new day for git> into <hello>. +git bisect skip $HASH3 # only skipped commits left to test -# possible first bad commit: [32a594a3fdac2d57cf6d02987e30eec68511498c] Add <4: Ciao for now> into <hello>. -# possible first bad commit: [3de952f2416b6084f557ec417709eac740c6818c] Add <3: Another new day for git> into <hello>. +# possible first bad commit: [$HASH4] Add <4: Ciao for now> into <hello>. +# possible first bad commit: [$HASH3] Add <3: Another new day for git> into <hello>. EOF test_expect_success 'bisect log: only skip commits left' ' diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index 716283b274..ad1922b999 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -38,7 +38,7 @@ test_expect_success setup ' advance h ' -script='s/^..\(b.\) *[0-9a-f]* \(.*\)$/\1 \2/p' +t6040_script='s/^..\(b.\) *[0-9a-f]* \(.*\)$/\1 \2/p' cat >expect <<\EOF b1 [ahead 1, behind 1] d b2 [ahead 1, behind 1] d @@ -53,7 +53,7 @@ test_expect_success 'branch -v' ' cd test && git branch -v ) | - sed -n -e "$script" >actual && + sed -n -e "$t6040_script" >actual && test_i18ncmp expect actual ' @@ -71,7 +71,7 @@ test_expect_success 'branch -vv' ' cd test && git branch -vv ) | - sed -n -e "$script" >actual && + sed -n -e "$t6040_script" >actual && test_i18ncmp expect actual ' @@ -160,6 +160,19 @@ test_expect_success 'status -s -b --no-ahead-behind (diverged from upstream)' ' ' cat >expect <<\EOF +## b1...origin/master [different] +EOF + +test_expect_success 'status.aheadbehind=false status -s -b (diverged from upstream)' ' + ( + cd test && + git checkout b1 >/dev/null && + git -c status.aheadbehind=false status -s -b | head -1 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF On branch b1 Your branch and 'origin/master' have diverged, and have 1 and 1 different commits each, respectively. @@ -174,6 +187,15 @@ test_expect_success 'status --long --branch' ' test_i18ncmp expect actual ' +test_expect_success 'status --long --branch' ' + ( + cd test && + git checkout b1 >/dev/null && + git -c status.aheadbehind=true status --long -b | head -3 + ) >actual && + test_i18ncmp expect actual +' + cat >expect <<\EOF On branch b1 Your branch and 'origin/master' refer to different commits. @@ -188,6 +210,15 @@ test_expect_success 'status --long --branch --no-ahead-behind' ' test_i18ncmp expect actual ' +test_expect_success 'status.aheadbehind=false status --long --branch' ' + ( + cd test && + git checkout b1 >/dev/null && + git -c status.aheadbehind=false status --long -b | head -2 + ) >actual && + test_i18ncmp expect actual +' + cat >expect <<\EOF ## b5...brokenbase [gone] EOF diff --git a/t/t6042-merge-rename-corner-cases.sh b/t/t6042-merge-rename-corner-cases.sh index 09dfa8bd92..c5b57f40c3 100755 --- a/t/t6042-merge-rename-corner-cases.sh +++ b/t/t6042-merge-rename-corner-cases.sh @@ -411,6 +411,122 @@ test_expect_success 'disappearing dir in rename/directory conflict handled' ' ) ' +# Test for basic rename/add-dest conflict, with rename needing content merge: +# Commit O: a +# Commit A: rename a->b, modifying b too +# Commit B: modify a, add different b + +test_expect_success 'setup rename-with-content-merge vs. add' ' + test_create_repo rename-with-content-merge-and-add && + ( + cd rename-with-content-merge-and-add && + + test_seq 1 5 >a && + git add a && + git commit -m O && + git tag O && + + git checkout -b A O && + git mv a b && + test_seq 0 5 >b && + git add b && + git commit -m A && + + git checkout -b B O && + echo 6 >>a && + echo hello world >b && + git add a b && + git commit -m B + ) +' + +test_expect_success 'handle rename-with-content-merge vs. add' ' + ( + cd rename-with-content-merge-and-add && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/add)" out && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + # Also, make sure both unmerged entries are for "b" + git ls-files -u b >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + test_path_is_missing a && + test_path_is_file b && + + test_seq 0 6 >tmp && + git hash-object tmp >expect && + git rev-parse B:b >>expect && + git rev-parse >actual \ + :2:b :3:b && + test_cmp expect actual && + + # Test that the two-way merge in b is as expected + git cat-file -p :2:b >>ours && + git cat-file -p :3:b >>theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + ours empty theirs && + test_cmp ours b + ) +' + +test_expect_success 'handle rename-with-content-merge vs. add, merge other way' ' + ( + cd rename-with-content-merge-and-add && + + git reset --hard && + git clean -fdx && + + git checkout B^0 && + + test_must_fail git merge -s recursive A^0 >out && + test_i18ngrep "CONFLICT (rename/add)" out && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + # Also, make sure both unmerged entries are for "b" + git ls-files -u b >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + test_path_is_missing a && + test_path_is_file b && + + test_seq 0 6 >tmp && + git rev-parse B:b >expect && + git hash-object tmp >>expect && + git rev-parse >actual \ + :2:b :3:b && + test_cmp expect actual && + + # Test that the two-way merge in b is as expected + git cat-file -p :2:b >>ours && + git cat-file -p :3:b >>theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "A^0" \ + ours empty theirs && + test_cmp ours b + ) +' + # Test for all kinds of things that can go wrong with rename/rename (2to1): # Commit A: new files: a & b # Commit B: rename a->c, modify b diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh index 62c564707b..c966147d5d 100755 --- a/t/t6043-merge-rename-directories.sh +++ b/t/t6043-merge-rename-directories.sh @@ -75,7 +75,7 @@ test_expect_success '1a-check: Simple directory rename detection' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && git ls-files -s >out && test_line_count = 4 out && @@ -142,7 +142,7 @@ test_expect_success '1b-check: Merge a directory with another' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -201,7 +201,7 @@ test_expect_success '1c-check: Transitive renaming' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && git ls-files -s >out && test_line_count = 3 out && @@ -270,7 +270,7 @@ test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) con git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename)" out && git ls-files -s >out && @@ -350,7 +350,7 @@ test_expect_success '1e-check: Renamed directory, with all files being renamed t git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -416,7 +416,7 @@ test_expect_success '1f-check: Split a directory into two other directories' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 6 out && @@ -497,7 +497,7 @@ test_expect_success '2a-check: Directory split into two on one side, with equal git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT.*directory rename split" out && git ls-files -s >out && @@ -559,7 +559,7 @@ test_expect_success '2b-check: Directory split into two on one side, with equal git checkout A^0 && - git merge -s recursive B^0 >out && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && git ls-files -s >out && test_line_count = 3 out && @@ -640,7 +640,7 @@ test_expect_success '3a-check: Avoid implicit rename if involved as source on ot git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -705,7 +705,7 @@ test_expect_success '3b-check: Avoid implicit rename if involved as source on cu git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep CONFLICT.*rename/rename.*z/d.*x/d.*w/d out && test_i18ngrep ! CONFLICT.*rename/rename.*y/d out && @@ -826,7 +826,7 @@ test_expect_success '4a-check: Directory split, with original directory still pr git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 5 out && @@ -915,7 +915,7 @@ test_expect_success '5a-check: Merge directories, other side adds files to origi git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT.*implicit dir rename" out && git ls-files -s >out && @@ -989,7 +989,7 @@ test_expect_success '5b-check: Rename/delete in order to get add/add/add conflic git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (add/add).* y/d" out && git ls-files -s >out && @@ -1069,7 +1069,7 @@ test_expect_success '5c-check: Transitive rename would cause rename/rename/renam git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*z/d" out && test_i18ngrep "CONFLICT (add/add).* y/d" out && @@ -1153,7 +1153,7 @@ test_expect_success '5d-check: Directory/file/file conflict due to directory ren git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (file/directory).*y/d" out && git ls-files -s >out && @@ -1243,7 +1243,7 @@ test_expect_success '6a-check: Tricky rename/delete' ' git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/delete).*z/c.*y/c" out && git ls-files -s >out && @@ -1308,7 +1308,7 @@ test_expect_success '6b-check: Same rename done on both sides' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -1370,7 +1370,7 @@ test_expect_success '6c-check: Rename only done on same side' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -1432,7 +1432,7 @@ test_expect_success '6d-check: We do not always want transitive renaming' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -1495,7 +1495,7 @@ test_expect_success '6e-check: Add/add from one side' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -1591,7 +1591,7 @@ test_expect_success '7a-check: rename-dir vs. rename-dir (NOT split evenly) PLUS git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename).*z/b.*y/b.*w/b" out && test_i18ngrep "CONFLICT (rename/rename).*z/c.*y/c.*x/c" out && @@ -1663,7 +1663,7 @@ test_expect_success '7b-check: rename/rename(2to1), but only due to transitive r git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename)" out && git ls-files -s >out && @@ -1740,7 +1740,7 @@ test_expect_success '7c-check: rename/rename(1to...2or3); transitive rename may git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*y/d" out && git ls-files -s >out && @@ -1804,7 +1804,7 @@ test_expect_success '7d-check: transitive rename involved in rename/delete; how git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && git ls-files -s >out && @@ -1894,7 +1894,7 @@ test_expect_success '7e-check: transitive rename in rename/delete AND dirs in th git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && git ls-files -s >out && @@ -1985,7 +1985,7 @@ test_expect_success '8a-check: Dual-directory rename, one into the others way' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 6 out && @@ -2063,7 +2063,7 @@ test_expect_success '8b-check: Dual-directory rename, one into the others way, w git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 6 out && @@ -2135,7 +2135,7 @@ test_expect_success '8c-check: modify/delete or rename+modify/delete' ' git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (modify/delete).* z/d" out && git ls-files -s >out && @@ -2212,7 +2212,7 @@ test_expect_success '8d-check: rename/delete...or not?' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -2287,7 +2287,7 @@ test_expect_success '8e-check: Both sides rename, one side adds to original dire git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep CONFLICT.*rename/rename.*z/c.*y/c.*w/c out && test_i18ngrep CONFLICT.*rename/rename.*z/b.*y/b.*w/b out && @@ -2374,7 +2374,7 @@ test_expect_success '9a-check: Inner renamed directory within outer renamed dire git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 7 out && @@ -2444,7 +2444,7 @@ test_expect_success '9b-check: Transitive rename with content merge' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -2534,7 +2534,7 @@ test_expect_success '9c-check: Doubly transitive rename?' ' git checkout A^0 && - git merge -s recursive B^0 >out && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "WARNING: Avoiding applying x -> z rename to x/f" out && git ls-files -s >out && @@ -2622,7 +2622,7 @@ test_expect_success '9d-check: N-way transitive rename?' ' git checkout A^0 && - git merge -s recursive B^0 >out && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "WARNING: Avoiding applying z -> y rename to z/t" out && test_i18ngrep "WARNING: Avoiding applying y -> x rename to y/a" out && test_i18ngrep "WARNING: Avoiding applying x -> w rename to x/b" out && @@ -2704,7 +2704,7 @@ test_expect_success C_LOCALE_OUTPUT '9e-check: N-to-1 whammo' ' git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && grep "CONFLICT (implicit dir rename): Cannot map more than one path to combined/yo" out >error_line && grep -q dir1/yo error_line && grep -q dir2/yo error_line && @@ -2782,7 +2782,7 @@ test_expect_success '9f-check: Renamed directory that only contained immediate s git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -2849,7 +2849,7 @@ test_expect_failure '9g-check: Renamed directory that only contained immediate s git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -2918,7 +2918,7 @@ test_expect_success '9h-check: Avoid dir rename on merely modified path' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -2993,7 +2993,7 @@ test_expect_success '10a-check: Overwrite untracked with normal rename/delete' ' echo very >z/c && echo important >z/d && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "The following untracked working tree files would be overwritten by merge" err && git ls-files -s >out && @@ -3061,7 +3061,7 @@ test_expect_success '10b-check: Overwrite untracked with dir rename + delete' ' echo important >y/d && echo contents >y/e && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/delete).*Version B\^0 of y/d left in tree at y/d~B\^0" out && test_i18ngrep "Error: Refusing to lose untracked file at y/e; writing to y/e~B\^0 instead" out && @@ -3137,7 +3137,7 @@ test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2) git checkout A^0 && echo important >y/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/rename)" out && test_i18ngrep "Refusing to lose untracked file at y/c; adding as y/c~B\^0 instead" out && @@ -3174,7 +3174,7 @@ test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2) mkdir y && echo important >y/c && - test_must_fail git merge -s recursive A^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive A^0 >out 2>err && test_i18ngrep "CONFLICT (rename/rename)" out && test_i18ngrep "Refusing to lose untracked file at y/c; adding as y/c~HEAD instead" out && @@ -3249,7 +3249,7 @@ test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' git checkout A^0 && echo important >y/wham && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/rename)" out && test_i18ngrep "Refusing to lose untracked file at y/wham" out && @@ -3327,7 +3327,7 @@ test_expect_failure '10e-check: Does git complain about untracked file that is n mkdir z && echo random >z/c && - git merge -s recursive B^0 >out 2>err && + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep ! "following untracked working tree files would be overwritten by merge" err && git ls-files -s >out && @@ -3407,7 +3407,7 @@ test_expect_success '11a-check: Avoid losing dirty contents with simple rename' git checkout A^0 && echo stuff >>z/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "Refusing to lose dirty file at z/c" out && test_seq 1 10 >expected && @@ -3479,7 +3479,7 @@ test_expect_success '11b-check: Avoid losing dirty file involved in directory re git checkout A^0 && echo stuff >>z/c && - git merge -s recursive B^0 >out 2>err && + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "Refusing to lose dirty file at z/c" out && grep -q stuff z/c && @@ -3554,7 +3554,7 @@ test_expect_success '11c-check: Avoid losing not-uptodate with rename + D/F conf git checkout A^0 && echo stuff >>y/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "following files would be overwritten by merge" err && grep -q stuff y/c && @@ -3621,7 +3621,7 @@ test_expect_success '11d-check: Avoid losing not-uptodate with rename + D/F conf git checkout A^0 && echo stuff >>z/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "Refusing to lose dirty file at z/c" out && grep -q stuff z/c && @@ -3700,7 +3700,7 @@ test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rena git checkout A^0 && echo mods >>y/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/rename)" out && test_i18ngrep "Refusing to lose dirty file at y/c" out && @@ -3782,7 +3782,7 @@ test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rena git checkout A^0 && echo important >>y/wham && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/rename)" out && test_i18ngrep "Refusing to lose dirty file at y/wham" out && @@ -3870,7 +3870,7 @@ test_expect_success '12a-check: Moving one directory hierarchy into another' ' git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 6 out && @@ -3910,7 +3910,7 @@ test_expect_success '12a-check: Moving one directory hierarchy into another' ' # To which, I can do no more than shrug my shoulders and say that # even simple rules give weird results when given weird inputs. -test_expect_success '12b-setup: Moving one directory hierarchy into another' ' +test_expect_success '12b-setup: Moving two directory hierarchies into each other' ' test_create_repo 12b && ( cd 12b && @@ -3940,13 +3940,13 @@ test_expect_success '12b-setup: Moving one directory hierarchy into another' ' ) ' -test_expect_success '12b-check: Moving one directory hierarchy into another' ' +test_expect_success '12b-check: Moving two directory hierarchies into each other' ' ( cd 12b && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -4016,7 +4016,7 @@ test_expect_success '12c-check: Moving one directory hierarchy into another w/ c git checkout A^0 && - test_must_fail git merge -s recursive B^0 && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -u >out && test_line_count = 12 out && @@ -4051,4 +4051,467 @@ test_expect_success '12c-check: Moving one directory hierarchy into another w/ c ) ' +########################################################################### +# SECTION 13: Checking informational and conflict messages +# +# A year after directory rename detection became the default, it was +# instead decided to report conflicts on the pathname on the basis that +# some users may expect the new files added or moved into a directory to +# be unrelated to all the other files in that directory, and thus that +# directory rename detection is unexpected. Test that the messages printed +# match our expectation. +########################################################################### + +# Testcase 13a, Basic directory rename with newly added files +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d,e/f} +# Expected: y/{b,c,d,e/f}, with notices/conflicts for both y/d and y/e/f + +test_expect_success '13a-setup: messages for newly added files' ' + test_create_repo 13a && + ( + cd 13a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + mkdir z/e && + echo f >z/e/f && + git add z/d z/e/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '13a-check(conflict): messages for newly added files' ' + ( + cd 13a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT..file.location.*z/e/f.added.in.B^0.*y/e/f out && + test_i18ngrep CONFLICT..file.location.*z/d.added.in.B^0.*y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/[de]" paths && + + test_path_is_missing z/d && + test_path_is_file y/d && + test_path_is_missing z/e/f && + test_path_is_file y/e/f + ) +' + +test_expect_success '13a-check(info): messages for newly added files' ' + ( + cd 13a && + + git reset --hard && + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && + + test_i18ngrep Path.updated:.*z/e/f.added.in.B^0.*y/e/f out && + test_i18ngrep Path.updated:.*z/d.added.in.B^0.*y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/[de]" paths && + + test_path_is_missing z/d && + test_path_is_file y/d && + test_path_is_missing z/e/f && + test_path_is_file y/e/f + ) +' + +# Testcase 13b, Transitive rename with conflicted content merge and default +# "conflict" setting +# (Related to testcase 1c, 9b) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c}, x/d_2 +# Commit B: z/{b,c,d_3} +# Expected: y/{b,c,d_merged}, with two conflict messages for y/d, +# one about content, and one about file location + +test_expect_success '13b-setup: messages for transitive rename with conflicted content' ' + test_create_repo 13b && + ( + cd 13b && + + mkdir x && + mkdir z && + test_seq 1 10 >x/d && + echo b >z/b && + echo c >z/c && + git add x z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + echo 11 >>x/d && + git add x/d && + test_tick && + git commit -m "A" && + + git checkout B && + echo eleven >>x/d && + git mv x/d z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '13b-check(conflict): messages for transitive rename with conflicted content' ' + ( + cd 13b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT.*content.*Merge.conflict.in.y/d out && + test_i18ngrep CONFLICT..file.location.*x/d.renamed.to.z/d.*moved.to.y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/d" paths && + + test_path_is_missing z/d && + test_path_is_file y/d + ) +' + +test_expect_success '13b-check(info): messages for transitive rename with conflicted content' ' + ( + cd 13b && + + git reset --hard && + git checkout A^0 && + + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT.*content.*Merge.conflict.in.y/d out && + test_i18ngrep Path.updated:.*x/d.renamed.to.z/d.in.B^0.*moving.it.to.y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/d" paths && + + test_path_is_missing z/d && + test_path_is_file y/d + ) +' + +# Testcase 13c, Rename/rename(1to1) due to directory rename +# Commit O: z/{b,c}, x/{d,e} +# Commit A: y/{b,c,d}, x/e +# Commit B: z/{b,c,d}, x/e +# Expected: y/{b,c,d}, with info or conflict messages for d ( +# A: renamed x/d -> z/d; B: renamed z/ -> y/ AND renamed x/d to y/d +# One could argue A had partial knowledge of what was done with +# d and B had full knowledge, but that's a slippery slope as +# shown in testcase 13d. + +test_expect_success '13c-setup: messages for rename/rename(1to1) via transitive rename' ' + test_create_repo 13c && + ( + cd 13c && + + mkdir x && + mkdir z && + test_seq 1 10 >x/d && + echo e >x/e && + echo b >z/b && + echo c >z/c && + git add x z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv x/d y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '13c-check(conflict): messages for rename/rename(1to1) via transitive rename' ' + ( + cd 13c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT..file.location.*x/d.renamed.to.z/d.*moved.to.y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/d" paths && + + test_path_is_missing z/d && + test_path_is_file y/d + ) +' + +test_expect_success '13c-check(info): messages for rename/rename(1to1) via transitive rename' ' + ( + cd 13c && + + git reset --hard && + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && + + test_i18ngrep Path.updated:.*x/d.renamed.to.z/d.in.B^0.*moving.it.to.y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/d" paths && + + test_path_is_missing z/d && + test_path_is_file y/d + ) +' + +# Testcase 13d, Rename/rename(1to1) due to directory rename on both sides +# Commit O: a/{z,y}, b/x, c/w +# Commit A: a/z, b/{y,x}, d/w +# Commit B: a/z, d/x, c/{y,w} +# Expected: a/z, d/{y,x,w} with no file location conflict for x +# Easy cases: +# * z is always in a; so it stays in a. +# * x starts in b, only modified on one side to move into d/ +# * w starts in c, only modified on one side to move into d/ +# Hard case: +# * A renames a/y to b/y, and B renames b/->d/ => a/y -> d/y +# * B renames a/y to c/y, and A renames c/->d/ => a/y -> d/y +# No conflict in where a/y ends up, so put it in d/y. + +test_expect_success '13d-setup: messages for rename/rename(1to1) via dual transitive rename' ' + test_create_repo 13d && + ( + cd 13d && + + mkdir a && + mkdir b && + mkdir c && + echo z >a/z && + echo y >a/y && + echo x >b/x && + echo w >c/w && + git add a b c && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv a/y b/ && + git mv c/ d/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv a/y c/ && + git mv b/ d/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '13d-check(conflict): messages for rename/rename(1to1) via dual transitive rename' ' + ( + cd 13d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT..file.location.*a/y.renamed.to.b/y.*moved.to.d/y out && + test_i18ngrep CONFLICT..file.location.*a/y.renamed.to.c/y.*moved.to.d/y out && + + git ls-files >paths && + ! grep b/ paths && + ! grep c/ paths && + grep "d/y" paths && + + test_path_is_missing b/y && + test_path_is_missing c/y && + test_path_is_file d/y + ) +' + +test_expect_success '13d-check(info): messages for rename/rename(1to1) via dual transitive rename' ' + ( + cd 13d && + + git reset --hard && + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && + + test_i18ngrep Path.updated.*a/y.renamed.to.b/y.*moving.it.to.d/y out && + test_i18ngrep Path.updated.*a/y.renamed.to.c/y.*moving.it.to.d/y out && + + git ls-files >paths && + ! grep b/ paths && + ! grep c/ paths && + grep "d/y" paths && + + test_path_is_missing b/y && + test_path_is_missing c/y && + test_path_is_file d/y + ) +' + +# Testcase 13e, directory rename in virtual merge base +# +# This testcase has a slightly different setup than all the above cases, in +# order to include a recursive case: +# +# A C +# o - o +# / \ / \ +# O o X ? +# \ / \ / +# o o +# B D +# +# Commit O: a/{z,y} +# Commit A: b/{z,y} +# Commit B: a/{z,y,x} +# Commit C: b/{z,y,x} +# Commit D: b/{z,y}, a/x +# Expected: b/{z,y,x} (sort of; see below for why this might not be expected) +# +# NOTES: 'X' represents a virtual merge base. With the default of +# directory rename detection yielding conflicts, merging A and B +# results in a conflict complaining about whether 'x' should be +# under 'a/' or 'b/'. However, when creating the virtual merge +# base 'X', since virtual merge bases need to be written out as a +# tree, we cannot have a conflict, so some resolution has to be +# picked. +# +# In choosing the right resolution, it's worth noting here that +# commits C & D are merges of A & B that choose different +# locations for 'x' (i.e. they resolve the conflict differently), +# and so it would be nice when merging C & D if git could detect +# this difference of opinion and report a conflict. But the only +# way to do so that I can think of would be to have the virtual +# merge base place 'x' in some directory other than either 'a/' or +# 'b/', which seems a little weird -- especially since it'd result +# in a rename/rename(1to2) conflict with a source path that never +# existed in any version. +# +# So, for now, when directory rename detection is set to +# 'conflict' just avoid doing directory rename detection at all in +# the recursive case. This will not allow us to detect a conflict +# in the outer merge for this special kind of setup, but it at +# least avoids hitting a BUG(). +# +test_expect_success '13e-setup: directory rename detection in recursive case' ' + test_create_repo 13e && + ( + cd 13e && + + mkdir a && + echo z >a/z && + echo y >a/y && + git add a && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv a/ b/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo x >a/x && + git add a && + test_tick && + git commit -m "B" && + + git branch C A && + git branch D B && + + git checkout C && + test_must_fail git -c merge.directoryRenames=conflict merge B && + git add b/x && + test_tick && + git commit -m "C" && + + + git checkout D && + test_must_fail git -c merge.directoryRenames=conflict merge A && + git add b/x && + mkdir a && + git mv b/x a/x && + test_tick && + git commit -m "D" + ) +' + +test_expect_success '13e-check: directory rename detection in recursive case' ' + ( + cd 13e && + + git checkout --quiet D^0 && + + git -c merge.directoryRenames=conflict merge -s recursive C^0 >out 2>err && + + test_i18ngrep ! CONFLICT out && + test_i18ngrep ! BUG: err && + test_i18ngrep ! core.dumped err && + test_must_be_empty err && + + git ls-files >paths && + ! grep a/x paths && + grep b/x paths + ) +' + test_done diff --git a/t/t6046-merge-skip-unneeded-updates.sh b/t/t6046-merge-skip-unneeded-updates.sh index 38e24f787c..3a47623ed3 100755 --- a/t/t6046-merge-skip-unneeded-updates.sh +++ b/t/t6046-merge-skip-unneeded-updates.sh @@ -466,7 +466,7 @@ test_expect_success '3a-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' git checkout A^0 && - GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && @@ -495,7 +495,7 @@ test_expect_success '3a-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' git checkout B^0 && - GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive A^0 >out 2>err && test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && @@ -560,7 +560,7 @@ test_expect_success '3b-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' git checkout A^0 && - GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && @@ -589,7 +589,7 @@ test_expect_success '3b-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' git checkout B^0 && - GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive A^0 >out 2>err && test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index d638119750..e7e64e085d 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -40,7 +40,8 @@ commit_peeling_shows_parents () test "$_found" = "$_parent" || return 1 _parent_number=$(( $_parent_number + 1 )) done && - test_must_fail git rev-parse --verify $_commit^$_parent_number + test_must_fail git rev-parse --verify $_commit^$_parent_number 2>err && + test_i18ngrep "Needed a single revision" err } commit_has_parents () @@ -393,9 +394,11 @@ test_expect_success 'replace ref cleanup' ' ' test_expect_success '--graft with and without already replaced object' ' - test $(git log --oneline | wc -l) = 7 && + git log --oneline >log && + test_line_count = 7 log && git replace --graft $HASH5 && - test $(git log --oneline | wc -l) = 3 && + git log --oneline >log && + test_line_count = 3 log && commit_has_parents $HASH5 && test_must_fail git replace --graft $HASH5 $HASH4 $HASH3 && git replace --force -g $HASH5 $HASH4 $HASH3 && @@ -403,6 +406,28 @@ test_expect_success '--graft with and without already replaced object' ' git replace -d $HASH5 ' +test_expect_success '--graft using a tag as the new parent' ' + git tag new_parent $HASH5 && + git replace --graft $HASH7 new_parent && + commit_has_parents $HASH7 $HASH5 && + git replace -d $HASH7 && + git tag -a -m "annotated new parent tag" annotated_new_parent $HASH5 && + git replace --graft $HASH7 annotated_new_parent && + commit_has_parents $HASH7 $HASH5 && + git replace -d $HASH7 +' + +test_expect_success '--graft using a tag as the replaced object' ' + git tag replaced_object $HASH7 && + git replace --graft replaced_object $HASH5 && + commit_has_parents $HASH7 $HASH5 && + git replace -d $HASH7 && + git tag -a -m "annotated replaced object tag" annotated_replaced_object $HASH7 && + git replace --graft annotated_replaced_object $HASH5 && + commit_has_parents $HASH7 $HASH5 && + git replace -d $HASH7 +' + test_expect_success GPG 'set up a signed commit' ' echo "line 17" >>hello && echo "line 18" >>hello && diff --git a/t/t6102-rev-list-unexpected-objects.sh b/t/t6102-rev-list-unexpected-objects.sh new file mode 100755 index 0000000000..28611c978e --- /dev/null +++ b/t/t6102-rev-list-unexpected-objects.sh @@ -0,0 +1,127 @@ +#!/bin/sh + +test_description='git rev-list should handle unexpected object types' + +. ./test-lib.sh + +test_expect_success 'setup well-formed objects' ' + blob="$(printf "foo" | git hash-object -w --stdin)" && + tree="$(printf "100644 blob $blob\tfoo" | git mktree)" && + commit="$(git commit-tree $tree -m "first commit")" && + git cat-file commit $commit >good-commit +' + +test_expect_success 'setup unexpected non-blob entry' ' + printf "100644 foo\0$(echo $tree | hex2oct)" >broken-tree && + broken_tree="$(git hash-object -w --literally -t tree broken-tree)" +' + +test_expect_failure 'traverse unexpected non-blob entry (lone)' ' + test_must_fail git rev-list --objects $broken_tree +' + +test_expect_success 'traverse unexpected non-blob entry (seen)' ' + test_must_fail git rev-list --objects $tree $broken_tree >output 2>&1 && + test_i18ngrep "is not a blob" output +' + +test_expect_success 'setup unexpected non-tree entry' ' + printf "40000 foo\0$(echo $blob | hex2oct)" >broken-tree && + broken_tree="$(git hash-object -w --literally -t tree broken-tree)" +' + +test_expect_success 'traverse unexpected non-tree entry (lone)' ' + test_must_fail git rev-list --objects $broken_tree +' + +test_expect_success 'traverse unexpected non-tree entry (seen)' ' + test_must_fail git rev-list --objects $blob $broken_tree >output 2>&1 && + test_i18ngrep "is not a tree" output +' + +test_expect_success 'setup unexpected non-commit parent' ' + sed "/^author/ { h; s/.*/parent $blob/; G; }" <good-commit \ + >broken-commit && + broken_commit="$(git hash-object -w --literally -t commit \ + broken-commit)" +' + +test_expect_success 'traverse unexpected non-commit parent (lone)' ' + test_must_fail git rev-list --objects $broken_commit >output 2>&1 && + test_i18ngrep "not a commit" output +' + +test_expect_success 'traverse unexpected non-commit parent (seen)' ' + test_must_fail git rev-list --objects $commit $broken_commit \ + >output 2>&1 && + test_i18ngrep "not a commit" output +' + +test_expect_success 'setup unexpected non-tree root' ' + sed -e "s/$tree/$blob/" <good-commit >broken-commit && + broken_commit="$(git hash-object -w --literally -t commit \ + broken-commit)" +' + +test_expect_success 'traverse unexpected non-tree root (lone)' ' + test_must_fail git rev-list --objects $broken_commit +' + +test_expect_success 'traverse unexpected non-tree root (seen)' ' + test_must_fail git rev-list --objects $blob $broken_commit \ + >output 2>&1 && + test_i18ngrep "not a tree" output +' + +test_expect_success 'setup unexpected non-commit tag' ' + git tag -a -m "tagged commit" tag $commit && + git cat-file tag tag >good-tag && + test_when_finished "git tag -d tag" && + sed -e "s/$commit/$blob/" <good-tag >broken-tag && + tag=$(git hash-object -w --literally -t tag broken-tag) +' + +test_expect_success 'traverse unexpected non-commit tag (lone)' ' + test_must_fail git rev-list --objects $tag +' + +test_expect_success 'traverse unexpected non-commit tag (seen)' ' + test_must_fail git rev-list --objects $blob $tag >output 2>&1 && + test_i18ngrep "not a commit" output +' + +test_expect_success 'setup unexpected non-tree tag' ' + git tag -a -m "tagged tree" tag $tree && + git cat-file tag tag >good-tag && + test_when_finished "git tag -d tag" && + sed -e "s/$tree/$blob/" <good-tag >broken-tag && + tag=$(git hash-object -w --literally -t tag broken-tag) +' + +test_expect_success 'traverse unexpected non-tree tag (lone)' ' + test_must_fail git rev-list --objects $tag +' + +test_expect_success 'traverse unexpected non-tree tag (seen)' ' + test_must_fail git rev-list --objects $blob $tag >output 2>&1 && + test_i18ngrep "not a tree" output +' + +test_expect_success 'setup unexpected non-blob tag' ' + git tag -a -m "tagged blob" tag $blob && + git cat-file tag tag >good-tag && + test_when_finished "git tag -d tag" && + sed -e "s/$blob/$commit/" <good-tag >broken-tag && + tag=$(git hash-object -w --literally -t tag broken-tag) +' + +test_expect_failure 'traverse unexpected non-blob tag (lone)' ' + test_must_fail git rev-list --objects $tag +' + +test_expect_success 'traverse unexpected non-blob tag (seen)' ' + test_must_fail git rev-list --objects $commit $tag >output 2>&1 && + test_i18ngrep "not a blob" output +' + +test_done diff --git a/t/t6112-rev-list-filters-objects.sh b/t/t6112-rev-list-filters-objects.sh index 9c11427719..de0e5a5d36 100755 --- a/t/t6112-rev-list-filters-objects.sh +++ b/t/t6112-rev-list-filters-objects.sh @@ -157,6 +157,10 @@ test_expect_success 'verify blob:limit=1m' ' ' # Test sparse:path=<path> filter. +# !!!! +# NOTE: sparse:path filter support has been dropped for security reasons, +# so the tests have been changed to make sure that using it fails. +# !!!! # Use a local file containing a sparse-checkout specification to filter # out blobs not required for the corresponding sparse-checkout. We do not # require sparse-checkout to actually be enabled. @@ -176,37 +180,20 @@ test_expect_success 'setup r3' ' echo sparse1 >pattern2 ' -test_expect_success 'verify sparse:path=pattern1 omits top-level files' ' - git -C r3 ls-files -s sparse1 sparse2 >ls_files_result && - awk -f print_2.awk ls_files_result | - sort >expected && - - git -C r3 rev-list --quiet --objects --filter-print-omitted \ - --filter=sparse:path=../pattern1 HEAD >revs && - awk -f print_1.awk revs | - sed "s/~//" | - sort >observed && - - test_cmp expected observed +test_expect_success 'verify sparse:path=pattern1 fails' ' + test_must_fail git -C r3 rev-list --quiet --objects \ + --filter-print-omitted --filter=sparse:path=../pattern1 HEAD ' -test_expect_success 'verify sparse:path=pattern2 omits both sparse2 files' ' - git -C r3 ls-files -s sparse2 dir1/sparse2 >ls_files_result && - awk -f print_2.awk ls_files_result | - sort >expected && - - git -C r3 rev-list --quiet --objects --filter-print-omitted \ - --filter=sparse:path=../pattern2 HEAD >revs && - awk -f print_1.awk revs | - sed "s/~//" | - sort >observed && - - test_cmp expected observed +test_expect_success 'verify sparse:path=pattern2 fails' ' + test_must_fail git -C r3 rev-list --quiet --objects \ + --filter-print-omitted --filter=sparse:path=../pattern2 HEAD ' # Test sparse:oid=<oid-ish> filter. -# Like sparse:path, but we get the sparse-checkout specification from -# a blob rather than a file on disk. +# Use a blob containing a sparse-checkout specification to filter +# out blobs not required for the corresponding sparse-checkout. We do not +# require sparse-checkout to actually be enabled. test_expect_success 'setup r3 part 2' ' echo dir1/ >r3/pattern && @@ -291,7 +278,19 @@ test_expect_success 'verify skipping tree iteration when not collecting omits' ' test_line_count = 2 actual && # Make sure no other trees were considered besides the root. - ! grep "Skipping contents of tree [^.]" filter_trace + ! grep "Skipping contents of tree [^.]" filter_trace && + + # Try this again with "combine:". If both sub-filters are skipping + # trees, the composite filter should also skip trees. This is not + # important unless the user does combine:tree:X+tree:Y or another filter + # besides "tree:" is implemented in the future which can skip trees. + GIT_TRACE=1 git -C r3 rev-list \ + --objects --filter=combine:tree:1+tree:3 HEAD 2>filter_trace && + + # Only skip the dir1/ tree, which is shared between the two commits. + grep "Skipping contents of tree " filter_trace >actual && + test_write_lines "Skipping contents of tree dir1/..." >expected && + test_cmp expected actual ' # Test tree:# filters. @@ -343,6 +342,148 @@ test_expect_success 'verify tree:3 includes everything expected' ' test_line_count = 10 actual ' +test_expect_success 'combine:... for a simple combination' ' + git -C r3 rev-list --objects --filter=combine:tree:2+blob:none HEAD \ + >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + + # There are also 2 commit objects + test_line_count = 5 actual && + + cp actual expected && + + # Try again using repeated --filter - this is equivalent to a manual + # combine with "combine:...+..." + git -C r3 rev-list --objects --filter=combine:tree:2 \ + --filter=blob:none HEAD >actual && + + test_cmp expected actual +' + +test_expect_success 'combine:... with URL encoding' ' + git -C r3 rev-list --objects \ + --filter=combine:tree%3a2+blob:%6Eon%65 HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + + # There are also 2 commit objects + test_line_count = 5 actual +' + +expect_invalid_filter_spec () { + spec="$1" && + err="$2" && + + test_must_fail git -C r3 rev-list --objects --filter="$spec" HEAD \ + >actual 2>actual_stderr && + test_must_be_empty actual && + test_i18ngrep "$err" actual_stderr +} + +test_expect_success 'combine:... while URL-encoding things that should not be' ' + expect_invalid_filter_spec combine%3Atree:2+blob:none \ + "invalid filter-spec" +' + +test_expect_success 'combine: with nothing after the :' ' + expect_invalid_filter_spec combine: "expected something after combine:" +' + +test_expect_success 'parse error in first sub-filter in combine:' ' + expect_invalid_filter_spec combine:tree:asdf+blob:none \ + "expected .tree:<depth>." +' + +test_expect_success 'combine:... with non-encoded reserved chars' ' + expect_invalid_filter_spec combine:tree:2+sparse:@xyz \ + "must escape char in sub-filter-spec: .@." && + expect_invalid_filter_spec combine:tree:2+sparse:\` \ + "must escape char in sub-filter-spec: .\`." && + expect_invalid_filter_spec combine:tree:2+sparse:~abc \ + "must escape char in sub-filter-spec: .\~." +' + +test_expect_success 'validate err msg for "combine:<valid-filter>+"' ' + expect_invalid_filter_spec combine:tree:2+ "expected .tree:<depth>." +' + +test_expect_success 'combine:... with edge-case hex digits: Ff Aa 0 9' ' + git -C r3 rev-list --objects --filter="combine:tree:2+bl%6Fb:n%6fne" \ + HEAD >actual && + test_line_count = 5 actual && + git -C r3 rev-list --objects --filter="combine:tree%3A2+blob%3anone" \ + HEAD >actual && + test_line_count = 5 actual && + git -C r3 rev-list --objects --filter="combine:tree:%30" HEAD >actual && + test_line_count = 2 actual && + git -C r3 rev-list --objects --filter="combine:tree:%39+blob:none" \ + HEAD >actual && + test_line_count = 5 actual +' + +test_expect_success 'add sparse pattern blobs whose paths have reserved chars' ' + cp r3/pattern r3/pattern1+renamed% && + cp r3/pattern "r3/p;at%ter+n" && + cp r3/pattern r3/^~pattern && + git -C r3 add pattern1+renamed% "p;at%ter+n" ^~pattern && + git -C r3 commit -m "add sparse pattern files with reserved chars" +' + +test_expect_success 'combine:... with more than two sub-filters' ' + git -C r3 rev-list --objects \ + --filter=combine:tree:3+blob:limit=40+sparse:oid=master:pattern \ + HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD~2 "" && + expect_has HEAD dir1 && + expect_has HEAD dir1/sparse1 && + expect_has HEAD dir1/sparse2 && + + # Should also have 3 commits + test_line_count = 9 actual && + + # Try again, this time making sure the last sub-filter is only + # URL-decoded once. + cp actual expect && + + git -C r3 rev-list --objects \ + --filter=combine:tree:3+blob:limit=40+sparse:oid=master:pattern1%2brenamed%25 \ + HEAD >actual && + test_cmp expect actual && + + # Use the same composite filter again, but with a pattern file name that + # requires encoding multiple characters, and use implicit filter + # combining. + test_when_finished "rm -f trace1" && + GIT_TRACE=$(pwd)/trace1 git -C r3 rev-list --objects \ + --filter=tree:3 --filter=blob:limit=40 \ + --filter=sparse:oid="master:p;at%ter+n" \ + HEAD >actual && + + test_cmp expect actual && + grep "Add to combine filter-spec: sparse:oid=master:p%3bat%25ter%2bn" \ + trace1 && + + # Repeat the above test, but this time, the characters to encode are in + # the LHS of the combined filter. + test_when_finished "rm -f trace2" && + GIT_TRACE=$(pwd)/trace2 git -C r3 rev-list --objects \ + --filter=sparse:oid=master:^~pattern \ + --filter=tree:3 --filter=blob:limit=40 \ + HEAD >actual && + + test_cmp expect actual && + grep "Add to combine filter-spec: sparse:oid=master:%5e%7epattern" \ + trace2 +' + # Test provisional omit collection logic with a repo that has objects appearing # at multiple depths - first deeper than the filter's threshold, then shallow. @@ -386,6 +527,37 @@ test_expect_success 'verify skipping tree iteration when collecting omits' ' test_cmp expect actual ' +test_expect_success 'setup r5' ' + git init r5 && + mkdir -p r5/subdir && + + echo 1 >r5/short-root && + echo 12345 >r5/long-root && + echo a >r5/subdir/short-subdir && + echo abcde >r5/subdir/long-subdir && + + git -C r5 add short-root long-root subdir && + git -C r5 commit -m "commit msg" +' + +test_expect_success 'verify collecting omits in combined: filter' ' + # Note that this test guards against the naive implementation of simply + # giving both filters the same "omits" set and expecting it to + # automatically merge them. + git -C r5 rev-list --objects --quiet --filter-print-omitted \ + --filter=combine:tree:2+blob:limit=3 HEAD >actual && + + # Expect 0 trees/commits, 3 blobs omitted (all blobs except short-root) + omitted_1=$(echo 12345 | git hash-object --stdin) && + omitted_2=$(echo a | git hash-object --stdin) && + omitted_3=$(echo abcde | git hash-object --stdin) && + + grep ~$omitted_1 actual && + grep ~$omitted_2 actual && + grep ~$omitted_3 actual && + test_line_count = 3 actual +' + # Test tree:<depth> where a tree is iterated to twice - once where a subentry is # too deep to be included, and again where the blob inside it is shallow enough # to be included. This makes sure we don't use LOFR_MARK_SEEN incorrectly (we @@ -454,11 +626,4 @@ test_expect_success 'expand blob limit in protocol' ' grep "blob:limit=1024" trace ' -test_expect_success 'expand tree depth limit in protocol' ' - GIT_TRACE_PACKET="$(pwd)/tree_trace" git -c protocol.version=2 clone \ - --filter=tree:0k "file://$(pwd)/r2" tree && - ! grep "tree:0k" tree_trace && - grep "tree:0" tree_trace -' - test_done diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index ee5b03ee18..2b883d8174 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -146,7 +146,7 @@ check_describe A-* HEAD test_expect_success 'describe works from outside repo using --git-dir' ' git clone --bare "$TRASH_DIRECTORY" "$TRASH_DIRECTORY/bare" && git --git-dir "$TRASH_DIRECTORY/bare" describe >out && - grep "^A-[1-9][0-9]\?-g[0-9a-f]\+$" out + grep -E "^A-[1-9][0-9]?-g[0-9a-f]+$" out ' check_describe "A-*[0-9a-f]" --dirty @@ -156,7 +156,7 @@ test_expect_success 'describe --dirty with --work-tree' ' cd "$TEST_DIRECTORY" && git --git-dir "$TRASH_DIRECTORY/.git" --work-tree "$TRASH_DIRECTORY" describe --dirty >"$TRASH_DIRECTORY/out" ) && - grep "^A-[1-9][0-9]\?-g[0-9a-f]\+$" out + grep -E "^A-[1-9][0-9]?-g[0-9a-f]+$" out ' test_expect_success 'set-up dirty work tree' ' @@ -170,7 +170,7 @@ test_expect_success 'describe --dirty with --work-tree (dirty)' ' cd "$TEST_DIRECTORY" && git --git-dir "$TRASH_DIRECTORY/.git" --work-tree "$TRASH_DIRECTORY" describe --dirty >"$TRASH_DIRECTORY/out" ) && - grep "^A-[1-9][0-9]\?-g[0-9a-f]\+-dirty$" out + grep -E "^A-[1-9][0-9]?-g[0-9a-f]+-dirty$" out ' check_describe "A-*[0-9a-f].mod" --dirty=.mod @@ -180,7 +180,7 @@ test_expect_success 'describe --dirty=.mod with --work-tree (dirty)' ' cd "$TEST_DIRECTORY" && git --git-dir "$TRASH_DIRECTORY/.git" --work-tree "$TRASH_DIRECTORY" describe --dirty=.mod >"$TRASH_DIRECTORY/out" ) && - grep "^A-[1-9][0-9]\?-g[0-9a-f]\+.mod$" out + grep -E "^A-[1-9][0-9]?-g[0-9a-f]+.mod$" out ' test_expect_success 'describe --dirty HEAD' ' diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 93f23cfa82..8a72b4c43a 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -66,12 +66,7 @@ test_expect_success setup ' git commit -a -m "Right #5" && git checkout -b long && - i=0 && - while test $i -lt 30 - do - test_commit $i one && - i=$(($i+1)) - done && + test_commit_bulk --start=0 --message=%s --filename=one 30 && git show-branch && diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 0ffd630713..9c910ce746 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -346,6 +346,32 @@ test_expect_success 'Verify descending sort' ' ' cat >expected <<\EOF +refs/tags/testtag +refs/tags/testtag-2 +EOF + +test_expect_success 'exercise patterns with prefixes' ' + git tag testtag-2 && + test_when_finished "git tag -d testtag-2" && + git for-each-ref --format="%(refname)" \ + refs/tags/testtag refs/tags/testtag-2 >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +refs/tags/testtag +refs/tags/testtag-2 +EOF + +test_expect_success 'exercise glob patterns with prefixes' ' + git tag testtag-2 && + test_when_finished "git tag -d testtag-2" && + git for-each-ref --format="%(refname)" \ + refs/tags/testtag "refs/tags/testtag-*" >actual && + test_cmp expected actual +' + +cat >expected <<\EOF 'refs/heads/master' 'refs/remotes/origin/master' 'refs/tags/testtag' @@ -392,8 +418,15 @@ test_atom head upstream:track '[ahead 1]' test_atom head upstream:trackshort '>' test_atom head upstream:track,nobracket 'ahead 1' test_atom head upstream:nobracket,track 'ahead 1' -test_atom head push:track '[ahead 1]' -test_atom head push:trackshort '>' + +test_expect_success 'setup for push:track[short]' ' + test_commit third && + git update-ref refs/remotes/myfork/master master && + git reset master~1 +' + +test_atom head push:track '[behind 1]' +test_atom head push:trackshort '<' test_expect_success 'Check that :track[short] cannot be used with other atoms' ' test_must_fail git for-each-ref --format="%(refname:track)" 2>/dev/null && @@ -420,8 +453,10 @@ test_expect_success 'Check for invalid refname format' ' test_expect_success 'set up color tests' ' cat >expected.color <<-EOF && $(git rev-parse --short refs/heads/master) <GREEN>master<RESET> + $(git rev-parse --short refs/remotes/myfork/master) <GREEN>myfork/master<RESET> $(git rev-parse --short refs/remotes/origin/master) <GREEN>origin/master<RESET> $(git rev-parse --short refs/tags/testtag) <GREEN>testtag<RESET> + $(git rev-parse --short refs/tags/third) <GREEN>third<RESET> $(git rev-parse --short refs/tags/two) <GREEN>two<RESET> EOF sed "s/<[^>]*>//g" <expected.color >expected.bare && @@ -491,6 +526,25 @@ test_expect_success 'Check ambiguous head and tag refs II (loose)' ' test_cmp expected actual ' +test_expect_success 'create tag without tagger' ' + git tag -a -m "Broken tag" taggerless && + git tag -f taggerless $(git cat-file tag taggerless | + sed -e "/^tagger /d" | + git hash-object --stdin -w -t tag) +' + +test_atom refs/tags/taggerless type 'commit' +test_atom refs/tags/taggerless tag 'taggerless' +test_atom refs/tags/taggerless tagger '' +test_atom refs/tags/taggerless taggername '' +test_atom refs/tags/taggerless taggeremail '' +test_atom refs/tags/taggerless taggerdate '' +test_atom refs/tags/taggerless committer '' +test_atom refs/tags/taggerless committername '' +test_atom refs/tags/taggerless committeremail '' +test_atom refs/tags/taggerless committerdate '' +test_atom refs/tags/taggerless subject 'Broken tag' + test_expect_success 'an unusual tag with an incomplete line' ' git tag -m "bogo" bogo && diff --git a/t/t6302-for-each-ref-filter.sh b/t/t6302-for-each-ref-filter.sh index fc067ed672..35408d53fd 100755 --- a/t/t6302-for-each-ref-filter.sh +++ b/t/t6302-for-each-ref-filter.sh @@ -441,4 +441,17 @@ test_expect_success '--merged is incompatible with --no-merged' ' test_must_fail git for-each-ref --merged HEAD --no-merged HEAD ' +test_expect_success 'validate worktree atom' ' + cat >expect <<-EOF && + master: $(pwd) + master_worktree: $(pwd)/worktree_dir + side: not checked out + EOF + git worktree add -b master_worktree worktree_dir master && + git for-each-ref --format="%(refname:short): %(if)%(worktreepath)%(then)%(worktreepath)%(else)not checked out%(end)" refs/heads/ >actual && + rm -r worktree_dir && + git worktree prune && + test_cmp expect actual +' + test_done diff --git a/t/t6500-gc.sh b/t/t6500-gc.sh index 4684d06552..c0f04dc6b0 100755 --- a/t/t6500-gc.sh +++ b/t/t6500-gc.sh @@ -71,6 +71,8 @@ test_expect_success 'gc --keep-largest-pack' ' git gc --keep-largest-pack && ( cd .git/objects/pack && ls *.pack ) >pack-list && test_line_count = 2 pack-list && + awk "/^P /{print \$2}" <.git/objects/info/packs >pack-info && + test_line_count = 2 pack-info && test_path_is_file $BASE_PACK && git fsck ) @@ -120,6 +122,25 @@ test_expect_success 'gc --quiet' ' test_must_be_empty stderr ' +test_expect_success 'gc.reflogExpire{Unreachable,}=never skips "expire" via "gc"' ' + test_config gc.reflogExpire never && + test_config gc.reflogExpireUnreachable never && + + GIT_TRACE=$(pwd)/trace.out git gc && + + # Check that git-pack-refs is run as a sanity check (done via + # gc_before_repack()) but that git-expire is not. + grep -E "^trace: (built-in|exec|run_command): git pack-refs --" trace.out && + ! grep -E "^trace: (built-in|exec|run_command): git reflog expire --" trace.out +' + +test_expect_success 'one of gc.reflogExpire{Unreachable,}=never does not skip "expire" via "gc"' ' + >trace.out && + test_config gc.reflogExpire never && + GIT_TRACE=$(pwd)/trace.out git gc && + grep -E "^trace: (built-in|exec|run_command): git reflog expire --" trace.out +' + run_and_wait_for_auto_gc () { # We read stdout from gc for the side effect of waiting until the # background gc process exits, closing its fd 9. Furthermore, the @@ -162,7 +183,15 @@ test_expect_success 'background auto gc respects lock for all operations' ' # now fake a concurrent gc that holds the lock; we can use our # shell pid so that it looks valid. hostname=$(hostname || echo unknown) && - printf "$$ %s" "$hostname" >.git/gc.pid && + shell_pid=$$ && + if test_have_prereq MINGW && test -f /proc/$shell_pid/winpid + then + # In Git for Windows, Bash (actually, the MSYS2 runtime) has a + # different idea of PIDs than git.exe (actually Windows). Use + # the Windows PID in this case. + shell_pid=$(cat /proc/$shell_pid/winpid) + fi && + printf "%d %s" "$shell_pid" "$hostname" >.git/gc.pid && # our gc should exit zero without doing anything run_and_wait_for_auto_gc && diff --git a/t/t6501-freshen-objects.sh b/t/t6501-freshen-objects.sh index 033871ee5f..f30b4849b6 100755 --- a/t/t6501-freshen-objects.sh +++ b/t/t6501-freshen-objects.sh @@ -137,7 +137,7 @@ test_expect_success 'do not complain about existing broken links (commit)' ' some message EOF commit=$(git hash-object -t commit -w broken-commit) && - git gc 2>stderr && + git gc -q 2>stderr && verbose git cat-file -e $commit && test_must_be_empty stderr ' @@ -147,7 +147,7 @@ test_expect_success 'do not complain about existing broken links (tree)' ' 100644 blob 0000000000000000000000000000000000000003 foo EOF tree=$(git mktree --missing <broken-tree) && - git gc 2>stderr && + git gc -q 2>stderr && git cat-file -e $tree && test_must_be_empty stderr ' @@ -162,7 +162,7 @@ test_expect_success 'do not complain about existing broken links (tag)' ' this is a broken tag EOF tag=$(git hash-object -t tag -w broken-tag) && - git gc 2>stderr && + git gc -q 2>stderr && git cat-file -e $tag && test_must_be_empty stderr ' diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 0b01862c23..80eb13d94e 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -932,6 +932,27 @@ test_expect_success GPG \ test_cmp expect actual ' +get_tag_header gpgsign-enabled $commit commit $time >expect +echo "A message" >>expect +echo '-----BEGIN PGP SIGNATURE-----' >>expect +test_expect_success GPG \ + 'git tag configured tag.gpgsign enables GPG sign' \ + 'test_config tag.gpgsign true && + git tag -m "A message" gpgsign-enabled && + get_tag_msg gpgsign-enabled>actual && + test_cmp expect actual +' + +get_tag_header no-sign $commit commit $time >expect +echo "A message" >>expect +test_expect_success GPG \ + 'git tag --no-sign configured tag.gpgsign skip GPG sign' \ + 'test_config tag.gpgsign true && + git tag -a --no-sign -m "A message" no-sign && + get_tag_msg no-sign>actual && + test_cmp expect actual +' + test_expect_success GPG \ 'trying to create a signed tag with non-existing -F file should fail' ' ! test -f nonexistingfile && @@ -1700,6 +1721,17 @@ test_expect_success '--points-at finds annotated tags of tags' ' test_cmp expect actual ' +test_expect_success 'recursive tagging should give advice' ' + sed -e "s/|$//" <<-EOF >expect && + hint: You have created a nested tag. The object referred to by your new tag is + hint: already a tag. If you meant to tag the object that it points to, use: + hint: | + hint: git tag -f nested annotated-v4.0^{} + EOF + git tag -m nested nested annotated-v4.0 2>actual && + test_i18ncmp expect actual +' + test_expect_success 'multiple --points-at are OR-ed together' ' cat >expect <<-\EOF && v2.0 diff --git a/t/t7060-wtstatus.sh b/t/t7060-wtstatus.sh index 53cf42fac1..d5218743e9 100755 --- a/t/t7060-wtstatus.sh +++ b/t/t7060-wtstatus.sh @@ -38,7 +38,6 @@ You have unmerged paths. Unmerged paths: (use "git add/rm <file>..." as appropriate to mark resolution) - deleted by us: foo no changes added to commit (use "git add" and/or "git commit -a") @@ -143,7 +142,6 @@ You have unmerged paths. Unmerged paths: (use "git add/rm <file>..." as appropriate to mark resolution) - both added: conflict.txt deleted by them: main.txt @@ -177,7 +175,6 @@ You have unmerged paths. Unmerged paths: (use "git add/rm <file>..." as appropriate to mark resolution) - both deleted: main.txt added by them: sub_master.txt added by us: sub_second.txt @@ -201,12 +198,10 @@ You have unmerged paths. (use "git merge --abort" to abort the merge) Changes to be committed: - new file: sub_master.txt Unmerged paths: (use "git rm <file>..." to mark resolution) - both deleted: main.txt Untracked files not listed (use -u option to show untracked files) diff --git a/t/t7064-wtstatus-pv2.sh b/t/t7064-wtstatus-pv2.sh index 11eccc231a..537787e598 100755 --- a/t/t7064-wtstatus-pv2.sh +++ b/t/t7064-wtstatus-pv2.sh @@ -445,6 +445,14 @@ test_expect_success 'verify --[no-]ahead-behind with V2 format' ' EOF git status --ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm that "status.aheadbehind" DOES NOT work on V2 format. + git -c status.aheadbehind=false status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm that "status.aheadbehind" DOES NOT work on V2 format. + git -c status.aheadbehind=true status --porcelain=v2 --branch --untracked-files=all >actual && test_cmp expect actual ) ' diff --git a/t/t7113-post-index-change-hook.sh b/t/t7113-post-index-change-hook.sh new file mode 100755 index 0000000000..f011ad7eec --- /dev/null +++ b/t/t7113-post-index-change-hook.sh @@ -0,0 +1,144 @@ +#!/bin/sh + +test_description='post index change hook' + +. ./test-lib.sh + +test_expect_success 'setup' ' + mkdir -p dir1 && + touch dir1/file1.txt && + echo testing >dir1/file2.txt && + git add . && + git commit -m "initial" +' + +test_expect_success 'test status, add, commit, others trigger hook without flags set' ' + mkdir -p .git/hooks && + write_script .git/hooks/post-index-change <<-\EOF && + if test "$1" -eq 1; then + echo "Invalid combination of flags passed to hook; updated_workdir is set." >testfailure + exit 1 + fi + if test "$2" -eq 1; then + echo "Invalid combination of flags passed to hook; updated_skipworktree is set." >testfailure + exit 1 + fi + if test -f ".git/index.lock"; then + echo ".git/index.lock exists" >testfailure + exit 3 + fi + if ! test -f ".git/index"; then + echo ".git/index does not exist" >testfailure + exit 3 + fi + echo "success" >testsuccess + EOF + mkdir -p dir2 && + touch dir2/file1.txt && + touch dir2/file2.txt && + : force index to be dirty && + test-tool chmtime +60 dir1/file1.txt && + git status && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git add . && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git commit -m "second" && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git checkout -- dir1/file1.txt && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git update-index && + test_path_is_missing testsuccess && + test_path_is_missing testfailure && + git reset --soft && + test_path_is_missing testsuccess && + test_path_is_missing testfailure +' + +test_expect_success 'test checkout and reset trigger the hook' ' + write_script .git/hooks/post-index-change <<-\EOF && + if test "$1" -eq 1 && test "$2" -eq 1; then + echo "Invalid combination of flags passed to hook; updated_workdir and updated_skipworktree are both set." >testfailure + exit 1 + fi + if test "$1" -eq 0 && test "$2" -eq 0; then + echo "Invalid combination of flags passed to hook; neither updated_workdir or updated_skipworktree are set." >testfailure + exit 2 + fi + if test "$1" -eq 1; then + if test -f ".git/index.lock"; then + echo "updated_workdir set but .git/index.lock exists" >testfailure + exit 3 + fi + if ! test -f ".git/index"; then + echo "updated_workdir set but .git/index does not exist" >testfailure + exit 3 + fi + else + echo "update_workdir should be set for checkout" >testfailure + exit 4 + fi + echo "success" >testsuccess + EOF + : force index to be dirty && + test-tool chmtime +60 dir1/file1.txt && + git checkout master && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + test-tool chmtime +60 dir1/file1.txt && + git checkout HEAD && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + test-tool chmtime +60 dir1/file1.txt && + git reset --hard && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git checkout -B test && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure +' + +test_expect_success 'test reset --mixed and update-index triggers the hook' ' + write_script .git/hooks/post-index-change <<-\EOF && + if test "$1" -eq 1 && test "$2" -eq 1; then + echo "Invalid combination of flags passed to hook; updated_workdir and updated_skipworktree are both set." >testfailure + exit 1 + fi + if test "$1" -eq 0 && test "$2" -eq 0; then + echo "Invalid combination of flags passed to hook; neither updated_workdir or updated_skipworktree are set." >testfailure + exit 2 + fi + if test "$2" -eq 1; then + if test -f ".git/index.lock"; then + echo "updated_skipworktree set but .git/index.lock exists" >testfailure + exit 3 + fi + if ! test -f ".git/index"; then + echo "updated_skipworktree set but .git/index does not exist" >testfailure + exit 3 + fi + else + echo "updated_skipworktree should be set for reset --mixed and update-index" >testfailure + exit 4 + fi + echo "success" >testsuccess + EOF + : force index to be dirty && + test-tool chmtime +60 dir1/file1.txt && + git reset --mixed --quiet HEAD~1 && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git hash-object -w --stdin <dir1/file2.txt >expect && + git update-index --cacheinfo 100644 "$(cat expect)" dir1/file1.txt && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git update-index --skip-worktree dir1/file2.txt && + git update-index --remove dir1/file2.txt && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure +' + +test_done diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 72b9b375ba..b696bae5f5 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -223,13 +223,8 @@ test_expect_success 'switch to another branch while carrying a deletion' ' test_must_fail git checkout simple 2>errs && test_i18ngrep overwritten errs && - git checkout --merge simple 2>errs && - test_i18ngrep ! overwritten errs && - git ls-files -u && - test_must_fail git cat-file -t :0:two && - test "$(git cat-file -t :1:two)" = blob && - test "$(git cat-file -t :2:two)" = blob && - test_must_fail git cat-file -t :3:two + test_must_fail git read-tree --quiet -m -u HEAD simple 2>errs && + test_must_be_empty errs ' test_expect_success 'checkout to detach HEAD (with advice declined)' ' @@ -254,7 +249,7 @@ test_expect_success 'checkout to detach HEAD (with advice declined)' ' test_expect_success 'checkout to detach HEAD' ' git config advice.detachedHead true && git checkout -f renamer && git clean -f && - GIT_TEST_GETTEXT_POISON= git checkout renamer^ 2>messages && + GIT_TEST_GETTEXT_POISON=false git checkout renamer^ 2>messages && grep "HEAD is now at 7329388" messages && test_line_count -gt 1 messages && H=$(git rev-parse --verify HEAD) && diff --git a/t/t7300-clean.sh b/t/t7300-clean.sh index 7b36954d63..d01fd120ab 100755 --- a/t/t7300-clean.sh +++ b/t/t7300-clean.sh @@ -669,4 +669,38 @@ test_expect_success 'git clean -d skips untracked dirs containing ignored files' test_path_is_missing foo/b/bb ' +test_expect_failure 'git clean -d skips nested repo containing ignored files' ' + test_when_finished "rm -rf nested-repo-with-ignored-file" && + + git init nested-repo-with-ignored-file && + ( + cd nested-repo-with-ignored-file && + >file && + git add file && + git commit -m Initial && + + # This file is ignored by a .gitignore rule in the outer repo + # added in the previous test. + >ignoreme + ) && + + git clean -fd && + + test_path_is_file nested-repo-with-ignored-file/.git/index && + test_path_is_file nested-repo-with-ignored-file/ignoreme && + test_path_is_file nested-repo-with-ignored-file/file +' + +test_expect_success MINGW 'handle clean & core.longpaths = false nicely' ' + test_config core.longpaths false && + a50=aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa && + mkdir -p $a50$a50/$a50$a50/$a50$a50 && + : >"$a50$a50/test.txt" 2>"$a50$a50/$a50$a50/$a50$a50/test.txt" && + # create a temporary outside the working tree to hide from "git clean" + test_must_fail git clean -xdf 2>.git/err && + # grepping for a strerror string is unportable but it is OK here with + # MINGW prereq + test_i18ngrep "too long" .git/err +' + test_done diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index aba2d4d6ee..a208cb26e1 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -46,6 +46,15 @@ test_expect_success 'submodule update aborts on missing gitmodules url' ' test_must_fail git submodule init ' +test_expect_success 'add aborts on repository with no commits' ' + cat >expect <<-\EOF && + '"'repo-no-commits'"' does not have a commit checked out + EOF + git init repo-no-commits && + test_must_fail git submodule add ../a ./repo-no-commits 2>actual && + test_i18ncmp expect actual +' + test_expect_success 'setup - repository in init subdirectory' ' mkdir init && ( @@ -809,7 +818,7 @@ test_expect_success '../bar/a/b/c works with relative local path - ../foo/bar.gi cp pristine-.git-config .git/config && cp pristine-.gitmodules .gitmodules && mkdir -p a/b/c && - (cd a/b/c && git init) && + (cd a/b/c && git init && test_commit msg) && git config remote.origin.url ../foo/bar.git && git submodule add ../bar/a/b/c ./a/b/c && git submodule init && diff --git a/t/t7405-submodule-merge.sh b/t/t7405-submodule-merge.sh index 7855bd8648..aa33978ed2 100755 --- a/t/t7405-submodule-merge.sh +++ b/t/t7405-submodule-merge.sh @@ -417,7 +417,7 @@ test_expect_failure 'directory/submodule conflict; keep submodule clean' ' ) ' -test_expect_failure 'directory/submodule conflict; should not treat submodule files as untracked or in the way' ' +test_expect_failure !FAIL_PREREQS 'directory/submodule conflict; should not treat submodule files as untracked or in the way' ' test_when_finished "git -C directory-submodule/path reset --hard" && test_when_finished "git -C directory-submodule reset --hard" && ( diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index e87164aa8f..df34c994d2 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -158,7 +158,6 @@ test_expect_success 'submodule update --init from and of subdirectory' ' test_i18ncmp expect2 actual2 ' -apos="'"; test_expect_success 'submodule update does not fetch already present commits' ' (cd submodule && echo line3 >> file && @@ -168,7 +167,7 @@ test_expect_success 'submodule update does not fetch already present commits' ' ) && (cd super/submodule && head=$(git rev-parse --verify HEAD) && - echo "Submodule path ${apos}submodule$apos: checked out $apos$head$apos" > ../../expected && + echo "Submodule path ${SQ}submodule$SQ: checked out $SQ$head$SQ" > ../../expected && git reset --hard HEAD~1 ) && (cd super && @@ -943,7 +942,10 @@ test_expect_success 'submodule update clone shallow submodule outside of depth' cd super3 && sed -e "s#url = ../#url = file://$pwd/#" <.gitmodules >.gitmodules.tmp && mv -f .gitmodules.tmp .gitmodules && - test_must_fail git submodule update --init --depth=1 2>actual && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + git submodule update --init --depth=1 2>actual && test_i18ngrep "Direct fetching of that commit failed." actual && git -C ../submodule config uploadpack.allowReachableSHA1InWant true && git submodule update --init --depth=1 >actual && diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh index 77729ac4aa..6b2aa917e1 100755 --- a/t/t7407-submodule-foreach.sh +++ b/t/t7407-submodule-foreach.sh @@ -411,4 +411,21 @@ test_expect_success 'multi-argument command passed to foreach is not shell-evalu test_cmp expected actual ' +test_expect_success 'option-like arguments passed to foreach commands are not lost' ' + ( + cd super && + git submodule foreach "echo be --quiet" > ../expected && + git submodule foreach echo be --quiet > ../actual + ) && + grep -sq -e "--quiet" expected && + test_cmp expected actual +' + +test_expect_success 'option-like arguments passed to foreach recurse correctly' ' + git -C clone2 submodule foreach --recursive "echo be --an-option" >expect && + git -C clone2 submodule foreach --recursive echo be --an-option >actual && + grep -e "--an-option" expect && + test_cmp expect actual +' + test_done diff --git a/t/t7411-submodule-config.sh b/t/t7411-submodule-config.sh index fcc0fb82d8..ad28e93880 100755 --- a/t/t7411-submodule-config.sh +++ b/t/t7411-submodule-config.sh @@ -243,18 +243,14 @@ test_expect_success 'reading nested submodules config' ' ) ' -# When this test eventually passes, before turning it into -# test_expect_success, remember to replace the test_i18ngrep below with -# a "test_must_be_empty warning" to be sure that the warning is actually -# removed from the code. -test_expect_failure 'reading nested submodules config when .gitmodules is not in the working tree' ' +test_expect_success 'reading nested submodules config when .gitmodules is not in the working tree' ' test_when_finished "git -C super/submodule checkout .gitmodules" && (cd super && echo "./nested_submodule" >expect && rm submodule/.gitmodules && test-tool submodule-nested-repo-config \ submodule submodule.nested_submodule.url >actual 2>warning && - test_i18ngrep "nested submodules without %s in the working tree are not supported yet" warning && + test_must_be_empty warning && test_cmp expect actual ) ' diff --git a/t/t7502-commit-porcelain.sh b/t/t7502-commit-porcelain.sh index ca4a740da0..14c92e4c25 100755 --- a/t/t7502-commit-porcelain.sh +++ b/t/t7502-commit-porcelain.sh @@ -16,7 +16,8 @@ commit_msg_is () { # Arguments: [<prefix] [<commit message>] [<commit options>] check_summary_oneline() { test_tick && - git commit ${3+"$3"} -m "$2" | head -1 > act && + git commit ${3+"$3"} -m "$2" >raw && + head -n 1 raw >act && # branch name SUMMARY_PREFIX="$(git name-rev --name-only HEAD)" && @@ -68,7 +69,7 @@ test_expect_success 'output summary format for merges' ' git checkout recursive-a && test_must_fail git merge recursive-b && # resolve the conflict - echo commit-a > file1 && + echo commit-a >file1 && git add file1 && check_summary_oneline "" "Merge" ' @@ -142,9 +143,11 @@ test_expect_success 'sign off' ' >positive && git add positive && git commit -s -m "thank you" && - actual=$(git cat-file commit HEAD | sed -ne "s/Signed-off-by: //p") && - expected=$(git var GIT_COMMITTER_IDENT | sed -e "s/>.*/>/") && - test "z$actual" = "z$expected" + git cat-file commit HEAD >commit.msg && + sed -ne "s/Signed-off-by: //p" commit.msg >actual && + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" ident >expected && + test_cmp expected actual ' @@ -153,8 +156,8 @@ test_expect_success 'multiple -m' ' >negative && git add negative && git commit -m "one" -m "two" -m "three" && - actual=$(git cat-file commit HEAD | sed -e "1,/^\$/d") && - expected=$(echo one; echo; echo two; echo; echo three) && + actual=$(git cat-file commit HEAD >tmp && sed -e "1,/^\$/d" tmp && rm tmp) && + expected=$(test_write_lines "one" "" "two" "" "three") && test "z$actual" = "z$expected" ' @@ -163,7 +166,8 @@ test_expect_success 'verbose' ' echo minus >negative && git add negative && - git status -v | sed -ne "/^diff --git /p" >actual && + git status -v >raw && + sed -ne "/^diff --git /p" raw >actual && echo "diff --git a/negative b/negative" >expect && test_cmp expect actual @@ -189,7 +193,8 @@ test_expect_success 'cleanup commit messages (verbatim option,-t)' ' echo >>negative && git commit --cleanup=verbatim --no-status -t expect -a && - git cat-file -p HEAD |sed -e "1,/^\$/d" >actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -198,7 +203,8 @@ test_expect_success 'cleanup commit messages (verbatim option,-F)' ' echo >>negative && git commit --cleanup=verbatim -F expect -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -207,7 +213,8 @@ test_expect_success 'cleanup commit messages (verbatim option,-m)' ' echo >>negative && git commit --cleanup=verbatim -m "$mesg_with_comment_and_newlines" -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -215,10 +222,11 @@ test_expect_success 'cleanup commit messages (verbatim option,-m)' ' test_expect_success 'cleanup commit messages (whitespace option,-F)' ' echo >>negative && - { echo;echo "# text";echo; } >text && + test_write_lines "" "# text" "" >text && echo "# text" >expect && git commit --cleanup=whitespace -F text -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -226,48 +234,51 @@ test_expect_success 'cleanup commit messages (whitespace option,-F)' ' test_expect_success 'cleanup commit messages (scissors option,-F,-e)' ' echo >>negative && - cat >text <<EOF && + cat >text <<-\EOF && -# to be kept + # to be kept - # ------------------------ >8 ------------------------ -# to be kept, too -# ------------------------ >8 ------------------------ -to be removed -# ------------------------ >8 ------------------------ -to be removed, too -EOF + # ------------------------ >8 ------------------------ + # to be kept, too + # ------------------------ >8 ------------------------ + to be removed + # ------------------------ >8 ------------------------ + to be removed, too + EOF - cat >expect <<EOF && -# to be kept + cat >expect <<-\EOF && + # to be kept - # ------------------------ >8 ------------------------ -# to be kept, too -EOF + # ------------------------ >8 ------------------------ + # to be kept, too + EOF git commit --cleanup=scissors -e -F text -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' test_expect_success 'cleanup commit messages (scissors option,-F,-e, scissors on first line)' ' echo >>negative && - cat >text <<EOF && -# ------------------------ >8 ------------------------ -to be removed -EOF + cat >text <<-\EOF && + # ------------------------ >8 ------------------------ + to be removed + EOF git commit --cleanup=scissors -e -F text -a --allow-empty-message && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_must_be_empty actual ' test_expect_success 'cleanup commit messages (strip option,-F)' ' echo >>negative && - { echo;echo "# text";echo sample;echo; } >text && + test_write_lines "" "# text" "sample" "" >text && echo sample >expect && git commit --cleanup=strip -F text -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -275,7 +286,7 @@ test_expect_success 'cleanup commit messages (strip option,-F)' ' test_expect_success 'cleanup commit messages (strip option,-F,-e)' ' echo >>negative && - { echo;echo sample;echo; } >text && + test_write_lines "" "sample" "" >text && git commit -e -F text -a && head -n 4 .git/COMMIT_EDITMSG >actual ' @@ -387,11 +398,11 @@ test_expect_success AUTOIDENT 'message shows committer when it is automatic' ' ' write_script .git/FAKE_EDITOR <<EOF -echo editor started > "$(pwd)/.git/result" +echo editor started >"$(pwd)/.git/result" exit 0 EOF -test_expect_success !AUTOIDENT 'do not fire editor when committer is bogus' ' +test_expect_success !FAIL_PREREQS,!AUTOIDENT 'do not fire editor when committer is bogus' ' >.git/result && echo >>negative && @@ -455,7 +466,7 @@ EOF test_expect_success EXECKEEPSPID 'a SIGTERM should break locks' ' echo >>negative && ! "$SHELL_PATH" -c '\'' - echo kill -TERM $$ >> .git/FAKE_EDITOR + echo kill -TERM $$ >>.git/FAKE_EDITOR GIT_EDITOR=.git/FAKE_EDITOR export GIT_EDITOR exec git commit -a'\'' && @@ -471,7 +482,8 @@ test_expect_success 'Hand committing of a redundant merge removes dups' ' test_must_fail git merge second master && git checkout master g && EDITOR=: git commit -a && - git cat-file commit HEAD | sed -n -e "s/^parent //p" -e "/^$/q" >actual && + git cat-file commit HEAD >raw && + sed -n -e "s/^parent //p" -e "/^$/q" raw >actual && test_cmp expect actual ' @@ -480,7 +492,8 @@ test_expect_success 'A single-liner subject with a token plus colon is not a foo git reset --hard && git commit -s -m "hello: kitty" --allow-empty && - git cat-file commit HEAD | sed -e "1,/^$/d" >actual && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && test_line_count = 3 actual ' diff --git a/t/t7503-pre-commit-and-pre-merge-commit-hooks.sh b/t/t7503-pre-commit-and-pre-merge-commit-hooks.sh new file mode 100755 index 0000000000..b3485450a2 --- /dev/null +++ b/t/t7503-pre-commit-and-pre-merge-commit-hooks.sh @@ -0,0 +1,281 @@ +#!/bin/sh + +test_description='pre-commit and pre-merge-commit hooks' + +. ./test-lib.sh + +HOOKDIR="$(git rev-parse --git-dir)/hooks" +PRECOMMIT="$HOOKDIR/pre-commit" +PREMERGE="$HOOKDIR/pre-merge-commit" + +# Prepare sample scripts that write their $0 to actual_hooks +test_expect_success 'sample script setup' ' + mkdir -p "$HOOKDIR" && + write_script "$HOOKDIR/success.sample" <<-\EOF && + echo $0 >>actual_hooks + exit 0 + EOF + write_script "$HOOKDIR/fail.sample" <<-\EOF && + echo $0 >>actual_hooks + exit 1 + EOF + write_script "$HOOKDIR/non-exec.sample" <<-\EOF && + echo $0 >>actual_hooks + exit 1 + EOF + chmod -x "$HOOKDIR/non-exec.sample" && + write_script "$HOOKDIR/require-prefix.sample" <<-\EOF && + echo $0 >>actual_hooks + test $GIT_PREFIX = "success/" + EOF + write_script "$HOOKDIR/check-author.sample" <<-\EOF + echo $0 >>actual_hooks + test "$GIT_AUTHOR_NAME" = "New Author" && + test "$GIT_AUTHOR_EMAIL" = "newauthor@example.com" + EOF +' + +test_expect_success 'root commit' ' + echo "root" >file && + git add file && + git commit -m "zeroth" && + git checkout -b side && + echo "foo" >foo && + git add foo && + git commit -m "make it non-ff" && + git branch side-orig side && + git checkout master +' + +test_expect_success 'setup conflicting branches' ' + test_when_finished "git checkout master" && + git checkout -b conflicting-a master && + echo a >conflicting && + git add conflicting && + git commit -m conflicting-a && + git checkout -b conflicting-b master && + echo b >conflicting && + git add conflicting && + git commit -m conflicting-b +' + +test_expect_success 'with no hook' ' + test_when_finished "rm -f actual_hooks" && + echo "foo" >file && + git add file && + git commit -m "first" && + test_path_is_missing actual_hooks +' + +test_expect_success 'with no hook (merge)' ' + test_when_finished "rm -f actual_hooks" && + git branch -f side side-orig && + git checkout side && + git merge -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success '--no-verify with no hook' ' + test_when_finished "rm -f actual_hooks" && + echo "bar" >file && + git add file && + git commit --no-verify -m "bar" && + test_path_is_missing actual_hooks +' + +test_expect_success '--no-verify with no hook (merge)' ' + test_when_finished "rm -f actual_hooks" && + git branch -f side side-orig && + git checkout side && + git merge --no-verify -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success 'with succeeding hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" expected_hooks actual_hooks" && + cp "$HOOKDIR/success.sample" "$PRECOMMIT" && + echo "$PRECOMMIT" >expected_hooks && + echo "more" >>file && + git add file && + git commit -m "more" && + test_cmp expected_hooks actual_hooks +' + +test_expect_success 'with succeeding hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" expected_hooks actual_hooks" && + cp "$HOOKDIR/success.sample" "$PREMERGE" && + echo "$PREMERGE" >expected_hooks && + git checkout side && + git merge -m "merge master" master && + git checkout master && + test_cmp expected_hooks actual_hooks +' + +test_expect_success 'automatic merge fails; both hooks are available' ' + test_when_finished "rm -f \"$PREMERGE\" \"$PRECOMMIT\"" && + test_when_finished "rm -f expected_hooks actual_hooks" && + test_when_finished "git checkout master" && + cp "$HOOKDIR/success.sample" "$PREMERGE" && + cp "$HOOKDIR/success.sample" "$PRECOMMIT" && + + git checkout conflicting-a && + test_must_fail git merge -m "merge conflicting-b" conflicting-b && + test_path_is_missing actual_hooks && + + echo "$PRECOMMIT" >expected_hooks && + echo a+b >conflicting && + git add conflicting && + git commit -m "resolve conflict" && + test_cmp expected_hooks actual_hooks +' + +test_expect_success '--no-verify with succeeding hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" actual_hooks" && + cp "$HOOKDIR/success.sample" "$PRECOMMIT" && + echo "even more" >>file && + git add file && + git commit --no-verify -m "even more" && + test_path_is_missing actual_hooks +' + +test_expect_success '--no-verify with succeeding hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" actual_hooks" && + cp "$HOOKDIR/success.sample" "$PREMERGE" && + git branch -f side side-orig && + git checkout side && + git merge --no-verify -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success 'with failing hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" expected_hooks actual_hooks" && + cp "$HOOKDIR/fail.sample" "$PRECOMMIT" && + echo "$PRECOMMIT" >expected_hooks && + echo "another" >>file && + git add file && + test_must_fail git commit -m "another" && + test_cmp expected_hooks actual_hooks +' + +test_expect_success '--no-verify with failing hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" actual_hooks" && + cp "$HOOKDIR/fail.sample" "$PRECOMMIT" && + echo "stuff" >>file && + git add file && + git commit --no-verify -m "stuff" && + test_path_is_missing actual_hooks +' + +test_expect_success 'with failing hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" expected_hooks actual_hooks" && + cp "$HOOKDIR/fail.sample" "$PREMERGE" && + echo "$PREMERGE" >expected_hooks && + git checkout side && + test_must_fail git merge -m "merge master" master && + git checkout master && + test_cmp expected_hooks actual_hooks +' + +test_expect_success '--no-verify with failing hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" actual_hooks" && + cp "$HOOKDIR/fail.sample" "$PREMERGE" && + git branch -f side side-orig && + git checkout side && + git merge --no-verify -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success POSIXPERM 'with non-executable hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" actual_hooks" && + cp "$HOOKDIR/non-exec.sample" "$PRECOMMIT" && + echo "content" >>file && + git add file && + git commit -m "content" && + test_path_is_missing actual_hooks +' + +test_expect_success POSIXPERM '--no-verify with non-executable hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" actual_hooks" && + cp "$HOOKDIR/non-exec.sample" "$PRECOMMIT" && + echo "more content" >>file && + git add file && + git commit --no-verify -m "more content" && + test_path_is_missing actual_hooks +' + +test_expect_success POSIXPERM 'with non-executable hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" actual_hooks" && + cp "$HOOKDIR/non-exec.sample" "$PREMERGE" && + git branch -f side side-orig && + git checkout side && + git merge -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success POSIXPERM '--no-verify with non-executable hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" actual_hooks" && + cp "$HOOKDIR/non-exec.sample" "$PREMERGE" && + git branch -f side side-orig && + git checkout side && + git merge --no-verify -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success 'with hook requiring GIT_PREFIX' ' + test_when_finished "rm -rf \"$PRECOMMIT\" expected_hooks actual_hooks success" && + cp "$HOOKDIR/require-prefix.sample" "$PRECOMMIT" && + echo "$PRECOMMIT" >expected_hooks && + echo "more content" >>file && + git add file && + mkdir success && + ( + cd success && + git commit -m "hook requires GIT_PREFIX = success/" + ) && + test_cmp expected_hooks actual_hooks +' + +test_expect_success 'with failing hook requiring GIT_PREFIX' ' + test_when_finished "rm -rf \"$PRECOMMIT\" expected_hooks actual_hooks fail" && + cp "$HOOKDIR/require-prefix.sample" "$PRECOMMIT" && + echo "$PRECOMMIT" >expected_hooks && + echo "more content" >>file && + git add file && + mkdir fail && + ( + cd fail && + test_must_fail git commit -m "hook must fail" + ) && + git checkout -- file && + test_cmp expected_hooks actual_hooks +' + +test_expect_success 'check the author in hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" expected_hooks actual_hooks" && + cp "$HOOKDIR/check-author.sample" "$PRECOMMIT" && + cat >expected_hooks <<-EOF && + $PRECOMMIT + $PRECOMMIT + $PRECOMMIT + EOF + test_must_fail git commit --allow-empty -m "by a.u.thor" && + ( + GIT_AUTHOR_NAME="New Author" && + GIT_AUTHOR_EMAIL="newauthor@example.com" && + export GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL && + git commit --allow-empty -m "by new.author via env" && + git show -s + ) && + git commit --author="New Author <newauthor@example.com>" \ + --allow-empty -m "by new.author via command line" && + git show -s && + test_cmp expected_hooks actual_hooks +' + +test_done diff --git a/t/t7503-pre-commit-hook.sh b/t/t7503-pre-commit-hook.sh deleted file mode 100755 index 984889b39d..0000000000 --- a/t/t7503-pre-commit-hook.sh +++ /dev/null @@ -1,139 +0,0 @@ -#!/bin/sh - -test_description='pre-commit hook' - -. ./test-lib.sh - -test_expect_success 'with no hook' ' - - echo "foo" > file && - git add file && - git commit -m "first" - -' - -test_expect_success '--no-verify with no hook' ' - - echo "bar" > file && - git add file && - git commit --no-verify -m "bar" - -' - -# now install hook that always succeeds -HOOKDIR="$(git rev-parse --git-dir)/hooks" -HOOK="$HOOKDIR/pre-commit" -mkdir -p "$HOOKDIR" -cat > "$HOOK" <<EOF -#!/bin/sh -exit 0 -EOF -chmod +x "$HOOK" - -test_expect_success 'with succeeding hook' ' - - echo "more" >> file && - git add file && - git commit -m "more" - -' - -test_expect_success '--no-verify with succeeding hook' ' - - echo "even more" >> file && - git add file && - git commit --no-verify -m "even more" - -' - -# now a hook that fails -cat > "$HOOK" <<EOF -#!/bin/sh -exit 1 -EOF - -test_expect_success 'with failing hook' ' - - echo "another" >> file && - git add file && - test_must_fail git commit -m "another" - -' - -test_expect_success '--no-verify with failing hook' ' - - echo "stuff" >> file && - git add file && - git commit --no-verify -m "stuff" - -' - -chmod -x "$HOOK" -test_expect_success POSIXPERM 'with non-executable hook' ' - - echo "content" >> file && - git add file && - git commit -m "content" - -' - -test_expect_success POSIXPERM '--no-verify with non-executable hook' ' - - echo "more content" >> file && - git add file && - git commit --no-verify -m "more content" - -' -chmod +x "$HOOK" - -# a hook that checks $GIT_PREFIX and succeeds inside the -# success/ subdirectory only -cat > "$HOOK" <<EOF -#!/bin/sh -test \$GIT_PREFIX = success/ -EOF - -test_expect_success 'with hook requiring GIT_PREFIX' ' - - echo "more content" >> file && - git add file && - mkdir success && - ( - cd success && - git commit -m "hook requires GIT_PREFIX = success/" - ) && - rmdir success -' - -test_expect_success 'with failing hook requiring GIT_PREFIX' ' - - echo "more content" >> file && - git add file && - mkdir fail && - ( - cd fail && - test_must_fail git commit -m "hook must fail" - ) && - rmdir fail && - git checkout -- file -' - -test_expect_success 'check the author in hook' ' - write_script "$HOOK" <<-\EOF && - test "$GIT_AUTHOR_NAME" = "New Author" && - test "$GIT_AUTHOR_EMAIL" = "newauthor@example.com" - EOF - test_must_fail git commit --allow-empty -m "by a.u.thor" && - ( - GIT_AUTHOR_NAME="New Author" && - GIT_AUTHOR_EMAIL="newauthor@example.com" && - export GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL && - git commit --allow-empty -m "by new.author via env" && - git show -s - ) && - git commit --author="New Author <newauthor@example.com>" \ - --allow-empty -m "by new.author via command line" && - git show -s -' - -test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index e1f11293e2..4e676cdce8 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -94,19 +94,16 @@ test_expect_success 'status --column' ' # (use "git pull" to merge the remote branch into yours) # # Changes to be committed: -# (use "git reset HEAD <file>..." to unstage) -# +# (use "git restore --staged <file>..." to unstage) # new file: dir2/added # # Changes not staged for commit: # (use "git add <file>..." to update what will be committed) -# (use "git checkout -- <file>..." to discard changes in working directory) -# +# (use "git restore <file>..." to discard changes in working directory) # modified: dir1/modified # # Untracked files: # (use "git add <file>..." to include in what will be committed) -# # dir1/untracked dir2/untracked # dir2/modified untracked # @@ -128,19 +125,16 @@ cat >expect <<\EOF # (use "git pull" to merge the remote branch into yours) # # Changes to be committed: -# (use "git reset HEAD <file>..." to unstage) -# +# (use "git restore --staged <file>..." to unstage) # new file: dir2/added # # Changes not staged for commit: # (use "git add <file>..." to update what will be committed) -# (use "git checkout -- <file>..." to discard changes in working directory) -# +# (use "git restore <file>..." to discard changes in working directory) # modified: dir1/modified # # Untracked files: # (use "git add <file>..." to include in what will be committed) -# # dir1/untracked # dir2/modified # dir2/untracked @@ -278,24 +272,20 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir2/modified Ignored files: (use "git add -f <file>..." to include in what will be committed) - .gitignore dir1/untracked dir2/untracked @@ -347,19 +337,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Ignored files: (use "git add -f <file>..." to include in what will be committed) - .gitignore dir1/untracked dir2/modified @@ -420,14 +407,12 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files not listed (use -u option to show untracked files) @@ -484,19 +469,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -542,19 +524,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -605,19 +584,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: ../dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: modified Untracked files: (use "git add <file>..." to include in what will be committed) - untracked ../dir2/modified ../dir2/untracked @@ -676,19 +652,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) <GREEN>new file: dir2/added<RESET> Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) <RED>modified: dir1/modified<RESET> Untracked files: (use "git add <file>..." to include in what will be committed) - <BLUE>dir1/untracked<RESET> <BLUE>dir2/modified<RESET> <BLUE>dir2/untracked<RESET> @@ -802,19 +775,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -852,13 +822,11 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/ untracked @@ -896,20 +864,17 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added new file: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -956,15 +921,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added new file: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Submodule changes to be committed: @@ -974,7 +937,6 @@ Submodule changes to be committed: Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -1019,13 +981,11 @@ and have 2 and 2 different commits each, respectively. Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -1068,15 +1028,13 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD^1 <file>..." to unstage) - + (use "git restore --source=HEAD^1 --staged <file>..." to unstage) new file: dir2/added new file: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Submodule changes to be committed: @@ -1086,7 +1044,6 @@ Submodule changes to be committed: Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -1123,14 +1080,12 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Submodule changes to be committed: @@ -1140,7 +1095,6 @@ Submodule changes to be committed: Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1235,15 +1189,13 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) (commit or discard the untracked or modified content in submodules) - modified: dir1/modified modified: sm (modified content) @@ -1254,7 +1206,6 @@ Submodule changes to be committed: Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1295,14 +1246,12 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified modified: sm (new commits) @@ -1318,7 +1267,6 @@ Submodules changed but not updated: Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1379,14 +1327,12 @@ cat > expect << EOF ; (use "git pull" to merge the remote branch into yours) ; ; Changes to be committed: -; (use "git reset HEAD <file>..." to unstage) -; +; (use "git restore --staged <file>..." to unstage) ; modified: sm ; ; Changes not staged for commit: ; (use "git add <file>..." to update what will be committed) -; (use "git checkout -- <file>..." to discard changes in working directory) -; +; (use "git restore <file>..." to discard changes in working directory) ; modified: dir1/modified ; modified: sm (new commits) ; @@ -1402,7 +1348,6 @@ cat > expect << EOF ; ; Untracked files: ; (use "git add <file>..." to include in what will be committed) -; ; .gitmodules ; dir1/untracked ; dir2/modified @@ -1431,13 +1376,11 @@ and have 2 and 2 different commits each, respectively. Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1458,19 +1401,16 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1581,14 +1521,12 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files not listed (use -u option to show untracked files) diff --git a/t/t7512-status-help.sh b/t/t7512-status-help.sh index 458608cc1e..66d7a62797 100755 --- a/t/t7512-status-help.sh +++ b/t/t7512-status-help.sh @@ -33,7 +33,6 @@ You have unmerged paths. Unmerged paths: (use "git add <file>..." to mark resolution) - both modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -54,7 +53,6 @@ All conflicts fixed but you are still merging. (use "git commit" to conclude merge) Changes to be committed: - modified: main.txt Untracked files not listed (use -u option to show untracked files) @@ -85,9 +83,8 @@ You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''. (use "git rebase --abort" to check out the original branch) Unmerged paths: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) (use "git add <file>..." to mark resolution) - both modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -110,8 +107,7 @@ You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''. (all conflicts fixed: run "git rebase --continue") Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: main.txt Untracked files not listed (use -u option to show untracked files) @@ -148,9 +144,8 @@ You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO (use "git rebase --abort" to check out the original branch) Unmerged paths: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) (use "git add <file>..." to mark resolution) - both modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -176,8 +171,7 @@ You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO (all conflicts fixed: run "git rebase --continue") Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: main.txt Untracked files not listed (use -u option to show untracked files) @@ -246,8 +240,7 @@ You are currently splitting a commit while rebasing branch '\''split_commit'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -354,8 +347,7 @@ You are currently splitting a commit while rebasing branch '\''several_edits'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -453,8 +445,7 @@ You are currently splitting a commit while rebasing branch '\''several_edits'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -557,8 +548,7 @@ You are currently splitting a commit while rebasing branch '\''several_edits'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -743,11 +733,11 @@ test_expect_success 'status when cherry-picking before resolving conflicts' ' On branch cherry_branch You are currently cherry-picking commit $TO_CHERRY_PICK. (fix conflicts and run "git cherry-pick --continue") + (use "git cherry-pick --skip" to skip this patch) (use "git cherry-pick --abort" to cancel the cherry-pick operation) Unmerged paths: (use "git add <file>..." to mark resolution) - both modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -768,10 +758,10 @@ test_expect_success 'status when cherry-picking after resolving conflicts' ' On branch cherry_branch You are currently cherry-picking commit $TO_CHERRY_PICK. (all conflicts fixed: run "git cherry-pick --continue") + (use "git cherry-pick --skip" to skip this patch) (use "git cherry-pick --abort" to cancel the cherry-pick operation) Changes to be committed: - modified: main.txt Untracked files not listed (use -u option to show untracked files) @@ -780,6 +770,41 @@ EOF test_i18ncmp expected actual ' +test_expect_success 'status when cherry-picking after committing conflict resolution' ' + git reset --hard cherry_branch && + test_when_finished "git cherry-pick --abort" && + test_must_fail git cherry-pick cherry_branch_second one_cherry && + echo end >main.txt && + git commit -a && + cat >expected <<EOF && +On branch cherry_branch +Cherry-pick currently in progress. + (run "git cherry-pick --continue" to continue) + (use "git cherry-pick --skip" to skip this patch) + (use "git cherry-pick --abort" to cancel the cherry-pick operation) + +nothing to commit (use -u to show untracked files) +EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + +test_expect_success 'status shows cherry-pick with invalid oid' ' + mkdir .git/sequencer && + test_write_lines "pick invalid-oid" >.git/sequencer/todo && + git status --untracked-files=no >actual 2>err && + git cherry-pick --quit && + test_must_be_empty err && + test_i18ncmp expected actual +' + +test_expect_success 'status does not show error if .git/sequencer is a file' ' + test_when_finished "rm .git/sequencer" && + test_write_lines hello >.git/sequencer && + git status --untracked-files=no 2>err && + test_must_be_empty err +' + test_expect_success 'status showing detached at and from a tag' ' test_commit atag tagging && git checkout atag && @@ -813,12 +838,12 @@ test_expect_success 'status while reverting commit (conflicts)' ' On branch master You are currently reverting commit $TO_REVERT. (fix conflicts and run "git revert --continue") + (use "git revert --skip" to skip this patch) (use "git revert --abort" to cancel the revert operation) Unmerged paths: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) (use "git add <file>..." to mark resolution) - both modified: to-revert.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -834,11 +859,11 @@ test_expect_success 'status while reverting commit (conflicts resolved)' ' On branch master You are currently reverting commit $TO_REVERT. (all conflicts fixed: run "git revert --continue") + (use "git revert --skip" to skip this patch) (use "git revert --abort" to cancel the revert operation) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: to-revert.txt Untracked files not listed (use -u option to show untracked files) @@ -857,6 +882,25 @@ EOF test_i18ncmp expected actual ' +test_expect_success 'status while reverting after committing conflict resolution' ' + test_when_finished "git revert --abort" && + git reset --hard new && + test_must_fail git revert old new && + echo reverted >to-revert.txt && + git commit -a && + cat >expected <<EOF && +On branch master +Revert currently in progress. + (run "git revert --continue" to continue) + (use "git revert --skip" to skip this patch) + (use "git revert --abort" to cancel the revert operation) + +nothing to commit (use -u to show untracked files) +EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + test_expect_success 'prepare for different number of commits rebased' ' git reset --hard master && git checkout -b several_commits && diff --git a/t/t7513-interpret-trailers.sh b/t/t7513-interpret-trailers.sh index c441861331..f19202b509 100755 --- a/t/t7513-interpret-trailers.sh +++ b/t/t7513-interpret-trailers.sh @@ -538,33 +538,50 @@ test_expect_success 'with 2 files arguments' ' test_cmp expected actual ' -test_expect_success 'with message that has comments' ' - cat basic_message >message_with_comments && - sed -e "s/ Z\$/ /" >>message_with_comments <<-\EOF && - # comment - - # other comment - Cc: Z - # yet another comment - Reviewed-by: Johan - Reviewed-by: Z - # last comment - - EOF - cat basic_patch >>message_with_comments && - cat basic_message >expected && - cat >>expected <<-\EOF && - # comment - - Reviewed-by: Johan - Cc: Peff - # last comment - - EOF - cat basic_patch >>expected && - git interpret-trailers --trim-empty --trailer "Cc: Peff" message_with_comments >actual && - test_cmp expected actual -' +# Cover multiple comment characters with the same test input. +for char in "#" ";" +do + case "$char" in + "#") + # This is the default, so let's explicitly _not_ + # set any config to make sure it behaves as we expect. + ;; + *) + config="-c core.commentChar=$char" + ;; + esac + + test_expect_success "with message that has comments ($char)" ' + cat basic_message >message_with_comments && + sed -e "s/ Z\$/ /" \ + -e "s/#/$char/g" >>message_with_comments <<-EOF && + # comment + + # other comment + Cc: Z + # yet another comment + Reviewed-by: Johan + Reviewed-by: Z + # last comment + + EOF + cat basic_patch >>message_with_comments && + cat basic_message >expected && + sed -e "s/#/$char/g" >>expected <<-\EOF && + # comment + + Reviewed-by: Johan + Cc: Peff + # last comment + + EOF + cat basic_patch >>expected && + git $config interpret-trailers \ + --trim-empty --trailer "Cc: Peff" \ + message_with_comments >actual && + test_cmp expected actual + ' +done test_expect_success 'with message that has an old style conflict block' ' cat basic_message >message_with_comments && diff --git a/t/t7517-per-repo-email.sh b/t/t7517-per-repo-email.sh index 231b8cc19d..b2401cec3e 100755 --- a/t/t7517-per-repo-email.sh +++ b/t/t7517-per-repo-email.sh @@ -85,4 +85,78 @@ test_expect_success REBASE_P \ test_must_fail git rebase -p master ' +test_expect_success 'author.name overrides user.name' ' + test_config user.name user && + test_config user.email user@example.com && + test_config author.name author && + test_commit author-name-override-user && + echo author user@example.com > expected-author && + echo user user@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + +test_expect_success 'author.email overrides user.email' ' + test_config user.name user && + test_config user.email user@example.com && + test_config author.email author@example.com && + test_commit author-email-override-user && + echo user author@example.com > expected-author && + echo user user@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + +test_expect_success 'committer.name overrides user.name' ' + test_config user.name user && + test_config user.email user@example.com && + test_config committer.name committer && + test_commit committer-name-override-user && + echo user user@example.com > expected-author && + echo committer user@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + +test_expect_success 'committer.email overrides user.email' ' + test_config user.name user && + test_config user.email user@example.com && + test_config committer.email committer@example.com && + test_commit committer-email-override-user && + echo user user@example.com > expected-author && + echo user committer@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + +test_expect_success 'author and committer environment variables override config settings' ' + test_config user.name user && + test_config user.email user@example.com && + test_config author.name author && + test_config author.email author@example.com && + test_config committer.name committer && + test_config committer.email committer@example.com && + GIT_AUTHOR_NAME=env_author && export GIT_AUTHOR_NAME && + GIT_AUTHOR_EMAIL=env_author@example.com && export GIT_AUTHOR_EMAIL && + GIT_COMMITTER_NAME=env_commit && export GIT_COMMITTER_NAME && + GIT_COMMITTER_EMAIL=env_commit@example.com && export GIT_COMMITTER_EMAIL && + test_commit env-override-conf && + echo env_author env_author@example.com > expected-author && + echo env_commit env_commit@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + sane_unset GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL && + sane_unset GIT_COMMITTER_NAME GIT_COMMITTER_EMAIL && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + test_done diff --git a/t/t7519-status-fsmonitor.sh b/t/t7519-status-fsmonitor.sh index 3e0a61db23..81a375fa0f 100755 --- a/t/t7519-status-fsmonitor.sh +++ b/t/t7519-status-fsmonitor.sh @@ -346,4 +346,12 @@ test_expect_success UNTRACKED_CACHE 'ignore .git changes when invalidating UNTR' test_cmp before after ' +test_expect_success 'discard_index() also discards fsmonitor info' ' + test_config core.fsmonitor "$TEST_DIRECTORY/t7519/fsmonitor-all" && + test_might_fail git update-index --refresh && + test-tool read-cache --print-and-refresh=tracked 2 >actual && + printf "tracked is%s up to date\n" "" " not" >expect && + test_cmp expect actual +' + test_done diff --git a/t/t7525-status-rename.sh b/t/t7525-status-rename.sh index ef8b1b3078..a62736dce0 100755 --- a/t/t7525-status-rename.sh +++ b/t/t7525-status-rename.sh @@ -84,7 +84,7 @@ test_expect_success 'status score=100%' ' test_i18ngrep "deleted:" actual && test_i18ngrep "new file:" actual && - git status --find-rename=100% >actual && + git status --find-renames=100% >actual && test_i18ngrep "deleted:" actual && test_i18ngrep "new file:" actual ' @@ -93,11 +93,11 @@ test_expect_success 'status score=01%' ' git status -M=01% >actual && test_i18ngrep "renamed:" actual && - git status --find-rename=01% >actual && + git status --find-renames=01% >actual && test_i18ngrep "renamed:" actual ' -test_expect_success 'copies not overridden by find-rename' ' +test_expect_success 'copies not overridden by find-renames' ' cp renamed copy && git add copy && @@ -105,7 +105,7 @@ test_expect_success 'copies not overridden by find-rename' ' test_i18ngrep "copied:" actual && test_i18ngrep "renamed:" actual && - git -c status.renames=copies status --find-rename=01% >actual && + git -c status.renames=copies status --find-renames=01% >actual && test_i18ngrep "copied:" actual && test_i18ngrep "renamed:" actual ' diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index 106148254d..132608879a 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -233,20 +233,65 @@ test_expect_success 'merge --squash c3 with c7' ' cat result.9z >file && git commit --no-edit -a && - { - cat <<-EOF - Squashed commit of the following: + cat >expect <<-EOF && + Squashed commit of the following: - $(git show -s c7) + $(git show -s c7) - # Conflicts: - # file - EOF - } >expect && - git cat-file commit HEAD | sed -e '1,/^$/d' >actual && + # Conflicts: + # file + EOF + git cat-file commit HEAD >raw && + sed -e '1,/^$/d' raw >actual && test_cmp expect actual ' +test_expect_success 'merge c3 with c7 with commit.cleanup = scissors' ' + git config commit.cleanup scissors && + git reset --hard c3 && + test_must_fail git merge c7 && + cat result.9z >file && + git commit --no-edit -a && + + cat >expect <<-\EOF && + Merge tag '"'"'c7'"'"' + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # file + EOF + git cat-file commit HEAD >raw && + sed -e '1,/^$/d' raw >actual && + test_i18ncmp expect actual +' + +test_expect_success 'merge c3 with c7 with --squash commit.cleanup = scissors' ' + git config commit.cleanup scissors && + git reset --hard c3 && + test_must_fail git merge --squash c7 && + cat result.9z >file && + git commit --no-edit -a && + + cat >expect <<-EOF && + Squashed commit of the following: + + $(git show -s c7) + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # file + EOF + git cat-file commit HEAD >raw && + sed -e '1,/^$/d' raw >actual && + test_i18ncmp expect actual +' + test_debug 'git log --graph --decorate --oneline --all' test_expect_success 'merge c1 with c2 and c3' ' @@ -525,6 +570,12 @@ test_expect_success 'combining --squash and --no-ff is refused' ' test_must_fail git merge --no-ff --squash c1 ' +test_expect_success 'combining --squash and --commit is refused' ' + git reset --hard c0 && + test_must_fail git merge --squash --commit c1 && + test_must_fail git merge --commit --squash c1 +' + test_expect_success 'option --ff-only overwrites --no-ff' ' git merge --no-ff --ff-only c1 && test_must_fail git merge --no-ff --ff-only c2 @@ -680,10 +731,10 @@ cat >editor <<\EOF ( echo "Merge work done on the side branch c1" echo - cat <"$1" + cat "$1" ) >"$1.tmp" && mv "$1.tmp" "$1" # strip comments and blank lines from end of message -sed -e '/^#/d' < "$1" | sed -e :a -e '/^\n*$/{$d;N;ba' -e '}' > expected +sed -e '/^#/d' "$1" | sed -e :a -e '/^\n*$/{$d;N;ba' -e '}' >expected EOF chmod 755 editor @@ -768,14 +819,14 @@ test_expect_success 'set up mod-256 conflict scenario' ' git commit -m base && # one side changes the first line of each to "master" - sed s/-1/-master/ <file >tmp && + sed s/-1/-master/ file >tmp && mv tmp file && git commit -am master && # and the other to "side"; merging the two will # yield 256 separate conflicts git checkout -b side HEAD^ && - sed s/-1/-side/ <file >tmp && + sed s/-1/-side/ file >tmp && mv tmp file && git commit -am side ' @@ -814,7 +865,7 @@ EOF test_expect_success EXECKEEPSPID 'killed merge can be completed with --continue' ' git reset --hard c0 && ! "$SHELL_PATH" -c '\'' - echo kill -TERM $$ >> .git/FAKE_EDITOR + echo kill -TERM $$ >>.git/FAKE_EDITOR GIT_EDITOR=.git/FAKE_EDITOR export GIT_EDITOR exec git merge --no-ff --edit c1'\'' && @@ -822,4 +873,50 @@ test_expect_success EXECKEEPSPID 'killed merge can be completed with --continue' verify_parents $c0 $c1 ' +test_expect_success 'merge --quit' ' + git init merge-quit && + ( + cd merge-quit && + test_commit base && + echo one >>base.t && + git commit -am one && + git branch one && + git checkout base && + echo two >>base.t && + git commit -am two && + test_must_fail git -c rerere.enabled=true merge one && + test_path_is_file .git/MERGE_HEAD && + test_path_is_file .git/MERGE_MODE && + test_path_is_file .git/MERGE_MSG && + git rerere status >rerere.before && + git merge --quit && + test_path_is_missing .git/MERGE_HEAD && + test_path_is_missing .git/MERGE_MODE && + test_path_is_missing .git/MERGE_MSG && + git rerere status >rerere.after && + test_must_be_empty rerere.after && + ! test_cmp rerere.after rerere.before + ) +' + +test_expect_success 'merge suggests matching remote refname' ' + git commit --allow-empty -m not-local && + git update-ref refs/remotes/origin/not-local HEAD && + git reset --hard HEAD^ && + + # This is white-box testing hackery; we happen to know + # that reading packed refs is more picky about the memory + # ownership of strings we pass to for_each_ref() callbacks. + git pack-refs --all --prune && + + test_must_fail git merge not-local 2>stderr && + grep origin/not-local stderr +' + +test_expect_success 'suggested names are not ambiguous' ' + git update-ref refs/heads/origin/not-local HEAD && + test_must_fail git merge not-local 2>stderr && + grep remotes/origin/not-local stderr +' + test_done diff --git a/t/t7604-merge-custom-message.sh b/t/t7604-merge-custom-message.sh index 89619cf446..cd4f9607dc 100755 --- a/t/t7604-merge-custom-message.sh +++ b/t/t7604-merge-custom-message.sh @@ -16,16 +16,16 @@ create_merge_msgs() { } test_expect_success 'setup' ' - echo c0 > c0.c && + echo c0 >c0.c && git add c0.c && git commit -m c0 && git tag c0 && - echo c1 > c1.c && + echo c1 >c1.c && git add c1.c && git commit -m c1 && git tag c1 && git reset --hard c0 && - echo c2 > c2.c && + echo c2 >c2.c && git add c2.c && git commit -m c2 && git tag c2 && @@ -36,15 +36,80 @@ test_expect_success 'setup' ' test_expect_success 'merge c2 with a custom message' ' git reset --hard c1 && git merge -m "$(cat exp.subject)" c2 && - git cat-file commit HEAD | sed -e "1,/^$/d" >actual && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && test_cmp exp.subject actual ' test_expect_success 'merge --log appends to custom message' ' git reset --hard c1 && git merge --log -m "$(cat exp.subject)" c2 && - git cat-file commit HEAD | sed -e "1,/^$/d" >actual && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && test_cmp exp.log actual ' +mesg_with_comment_and_newlines=' +# text + +' + +test_expect_success 'prepare file with comment line and trailing newlines' ' + printf "%s" "$mesg_with_comment_and_newlines" >expect +' + +test_expect_success 'cleanup commit messages (verbatim option)' ' + git reset --hard c1 && + git merge --cleanup=verbatim -F expect c2 && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && + test_cmp expect actual +' + +test_expect_success 'cleanup commit messages (whitespace option)' ' + git reset --hard c1 && + test_write_lines "" "# text" "" >text && + echo "# text" >expect && + git merge --cleanup=whitespace -F text c2 && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && + test_cmp expect actual +' + +test_expect_success 'cleanup merge messages (scissors option)' ' + git reset --hard c1 && + cat >text <<-\EOF && + + # to be kept + + # ------------------------ >8 ------------------------ + # to be kept, too + # ------------------------ >8 ------------------------ + to be removed + # ------------------------ >8 ------------------------ + to be removed, too + EOF + + cat >expect <<-\EOF && + # to be kept + + # ------------------------ >8 ------------------------ + # to be kept, too + EOF + git merge --cleanup=scissors -e -F text c2 && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && + test_cmp expect actual +' + +test_expect_success 'cleanup commit messages (strip option)' ' + git reset --hard c1 && + test_write_lines "" "# text" "sample" "" >text && + echo sample >expect && + git merge --cleanup=strip -F text c2 && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh index a9fb971615..ad288ddc69 100755 --- a/t/t7610-mergetool.sh +++ b/t/t7610-mergetool.sh @@ -130,18 +130,71 @@ test_expect_success 'custom mergetool' ' test_when_finished "git reset --hard" && git checkout -b test$test_count branch1 && git submodule update -N && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "" | git mergetool file1 file1 ) && - ( yes "" | git mergetool file2 "spaced name" >/dev/null 2>&1 ) && - ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && - test "$(cat file1)" = "master updated" && - test "$(cat file2)" = "master new" && - test "$(cat subdir/file3)" = "master new sub" && - test "$(cat submod/bar)" = "branch1 submodule" && + test_must_fail git merge master && + yes "" | git mergetool both && + yes "" | git mergetool file1 file1 && + yes "" | git mergetool file2 "spaced name" && + yes "" | git mergetool subdir/file3 && + yes "d" | git mergetool file11 && + yes "d" | git mergetool file12 && + yes "l" | git mergetool submod && + echo "master updated" >expect && + test_cmp expect file1 && + echo "master new" >expect && + test_cmp expect file2 && + echo "master new sub" >expect && + test_cmp expect subdir/file3 && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && + git commit -m "branch1 resolved with mergetool" +' + +test_expect_success 'gui mergetool' ' + test_config merge.guitool myguitool && + test_config mergetool.myguitool.cmd "(printf \"gui \" && cat \"\$REMOTE\") >\"\$MERGED\"" && + test_config mergetool.myguitool.trustExitCode true && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && + git submodule update -N && + test_must_fail git merge master && + yes "" | git mergetool --gui both && + yes "" | git mergetool -g file1 file1 && + yes "" | git mergetool --gui file2 "spaced name" && + yes "" | git mergetool --gui subdir/file3 && + yes "d" | git mergetool --gui file11 && + yes "d" | git mergetool --gui file12 && + yes "l" | git mergetool --gui submod && + echo "gui master updated" >expect && + test_cmp expect file1 && + echo "gui master new" >expect && + test_cmp expect file2 && + echo "gui master new sub" >expect && + test_cmp expect subdir/file3 && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && + git commit -m "branch1 resolved with mergetool" +' + +test_expect_success 'gui mergetool without merge.guitool set falls back to merge.tool' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && + git submodule update -N && + test_must_fail git merge master && + yes "" | git mergetool --gui both && + yes "" | git mergetool -g file1 file1 && + yes "" | git mergetool --gui file2 "spaced name" && + yes "" | git mergetool --gui subdir/file3 && + yes "d" | git mergetool --gui file11 && + yes "d" | git mergetool --gui file12 && + yes "l" | git mergetool --gui submod && + echo "master updated" >expect && + test_cmp expect file1 && + echo "master new" >expect && + test_cmp expect file2 && + echo "master new sub" >expect && + test_cmp expect subdir/file3 && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && git commit -m "branch1 resolved with mergetool" ' @@ -153,20 +206,21 @@ test_expect_success 'mergetool crlf' ' # test_when_finished is LIFO.) test_config core.autocrlf true && git checkout -b test$test_count branch1 && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && - ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && - ( yes "" | git mergetool "spaced name" >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod >/dev/null 2>&1 ) && + test_must_fail git merge master && + yes "" | git mergetool file1 && + yes "" | git mergetool file2 && + yes "" | git mergetool "spaced name" && + yes "" | git mergetool both && + yes "" | git mergetool subdir/file3 && + yes "d" | git mergetool file11 && + yes "d" | git mergetool file12 && + yes "r" | git mergetool submod && test "$(printf x | cat file1 -)" = "$(printf "master updated\r\nx")" && test "$(printf x | cat file2 -)" = "$(printf "master new\r\nx")" && test "$(printf x | cat subdir/file3 -)" = "$(printf "master new sub\r\nx")" && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && git commit -m "branch1 resolved with mergetool - autocrlf" ' @@ -176,9 +230,10 @@ test_expect_success 'mergetool in subdir' ' git submodule update -N && ( cd subdir && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool file3 >/dev/null 2>&1 ) && - test "$(cat file3)" = "master new sub" + test_must_fail git merge master && + yes "" | git mergetool file3 && + echo "master new sub" >expect && + test_cmp expect file3 ) ' @@ -188,17 +243,20 @@ test_expect_success 'mergetool on file in parent dir' ' git submodule update -N && ( cd subdir && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) && - ( yes "" | git mergetool ../file2 ../spaced\ name >/dev/null 2>&1 ) && - ( yes "" | git mergetool ../both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool ../file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool ../file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool ../submod >/dev/null 2>&1 ) && - test "$(cat ../file1)" = "master updated" && - test "$(cat ../file2)" = "master new" && - test "$(cat ../submod/bar)" = "branch1 submodule" && + test_must_fail git merge master && + yes "" | git mergetool file3 && + yes "" | git mergetool ../file1 && + yes "" | git mergetool ../file2 ../spaced\ name && + yes "" | git mergetool ../both && + yes "d" | git mergetool ../file11 && + yes "d" | git mergetool ../file12 && + yes "l" | git mergetool ../submod && + echo "master updated" >expect && + test_cmp expect ../file1 && + echo "master new" >expect && + test_cmp expect ../file2 && + echo "branch1 submodule" >expect && + test_cmp expect ../submod/bar && git commit -m "branch1 resolved with mergetool - subdir" ) ' @@ -209,9 +267,9 @@ test_expect_success 'mergetool skips autoresolved' ' git submodule update -N && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && + yes "d" | git mergetool file11 && + yes "d" | git mergetool file12 && + yes "l" | git mergetool submod && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" ' @@ -223,13 +281,17 @@ test_expect_success 'mergetool merges all from subdir (rerere disabled)' ' ( cd subdir && test_must_fail git merge master && - ( yes "r" | git mergetool ../submod ) && - ( yes "d" "d" | git mergetool --no-prompt ) && - test "$(cat ../file1)" = "master updated" && - test "$(cat ../file2)" = "master new" && - test "$(cat file3)" = "master new sub" && + yes "r" | git mergetool ../submod && + yes "d" "d" | git mergetool --no-prompt && + echo "master updated" >expect && + test_cmp expect ../file1 && + echo "master new" >expect && + test_cmp expect ../file2 && + echo "master new sub" >expect && + test_cmp expect file3 && ( cd .. && git submodule update -N ) && - test "$(cat ../submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect ../submod/bar && git commit -m "branch2 resolved by mergetool from subdir" ) ' @@ -242,13 +304,17 @@ test_expect_success 'mergetool merges all from subdir (rerere enabled)' ' ( cd subdir && test_must_fail git merge master && - ( yes "r" | git mergetool ../submod ) && - ( yes "d" "d" | git mergetool --no-prompt ) && - test "$(cat ../file1)" = "master updated" && - test "$(cat ../file2)" = "master new" && - test "$(cat file3)" = "master new sub" && + yes "r" | git mergetool ../submod && + yes "d" "d" | git mergetool --no-prompt && + echo "master updated" >expect && + test_cmp expect ../file1 && + echo "master new" >expect && + test_cmp expect ../file2 && + echo "master new sub" >expect && + test_cmp expect file3 && ( cd .. && git submodule update -N ) && - test "$(cat ../submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect ../submod/bar && git commit -m "branch2 resolved by mergetool from subdir" ) ' @@ -259,9 +325,9 @@ test_expect_success 'mergetool skips resolved paths when rerere is active' ' rm -rf .git/rr-cache && git checkout -b test$test_count branch1 && git submodule update -N && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "l" | git mergetool --no-prompt submod >/dev/null 2>&1 ) && - ( yes "d" "d" | git mergetool --no-prompt >/dev/null 2>&1 ) && + test_must_fail git merge master && + yes "l" | git mergetool --no-prompt submod && + yes "d" "d" | git mergetool --no-prompt && git submodule update -N && output="$(yes "n" | git mergetool --no-prompt)" && test "$output" = "No files need merging" @@ -302,9 +368,10 @@ test_expect_success 'mergetool takes partial path' ' git submodule update -N && test_must_fail git merge master && - ( yes "" | git mergetool subdir ) && + yes "" | git mergetool subdir && - test "$(cat subdir/file3)" = "master new sub" + echo "master new sub" >expect && + test_cmp expect subdir/file3 ' test_expect_success 'mergetool delete/delete conflict' ' @@ -369,14 +436,16 @@ test_expect_success 'deleted vs modified submodule' ' git checkout -b test$test_count.a test$test_count && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "r" | git mergetool submod && rmdir submod && mv submod-movedaside submod && - test "$(cat submod/bar)" = "branch1 submodule" && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping module" && @@ -386,10 +455,10 @@ test_expect_success 'deleted vs modified submodule' ' git submodule update -N && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "l" | git mergetool submod && test ! -e submod && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && @@ -400,10 +469,10 @@ test_expect_success 'deleted vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "r" | git mergetool submod && test ! -e submod && test -d submod.orig && git submodule update -N && @@ -416,13 +485,15 @@ test_expect_success 'deleted vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && - test "$(cat submod/bar)" = "master submodule" && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "l" | git mergetool submod && + echo "master submodule" >expect && + test_cmp expect submod/bar && + git submodule update -N && + echo "master submodule" >expect && + test_cmp expect submod/bar && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping module" @@ -440,14 +511,16 @@ test_expect_success 'file vs modified submodule' ' git checkout -b test$test_count.a branch1 && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "r" | git mergetool submod && rmdir submod && mv submod-movedaside submod && - test "$(cat submod/bar)" = "branch1 submodule" && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping module" && @@ -456,12 +529,13 @@ test_expect_success 'file vs modified submodule' ' git checkout -b test$test_count.b test$test_count && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "l" | git mergetool submod && git submodule update -N && - test "$(cat submod)" = "not a submodule" && + echo "not a submodule" >expect && + test_cmp expect submod && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping file" && @@ -472,13 +546,14 @@ test_expect_success 'file vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "r" | git mergetool submod && test -d submod.orig && git submodule update -N && - test "$(cat submod)" = "not a submodule" && + echo "not a submodule" >expect && + test_cmp expect submod && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping file" && @@ -488,13 +563,15 @@ test_expect_success 'file vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both>/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && - test "$(cat submod/bar)" = "master submodule" && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "l" | git mergetool submod && + echo "master submodule" >expect && + test_cmp expect submod/bar && + git submodule update -N && + echo "master submodule" >expect && + test_cmp expect submod/bar && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping module" @@ -543,22 +620,26 @@ test_expect_success 'submodule in subdirectory' ' git add subdir/subdir_module && git commit -m "change submodule in subdirectory on test$test_count.b" && - test_must_fail git merge test$test_count.a >/dev/null 2>&1 && + test_must_fail git merge test$test_count.a && ( cd subdir && - ( yes "l" | git mergetool subdir_module ) + yes "l" | git mergetool subdir_module ) && - test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && + echo "test$test_count.b" >expect && + test_cmp expect subdir/subdir_module/file15 && git submodule update -N && - test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && + echo "test$test_count.b" >expect && + test_cmp expect subdir/subdir_module/file15 && git reset --hard && git submodule update -N && - test_must_fail git merge test$test_count.a >/dev/null 2>&1 && - ( yes "r" | git mergetool subdir/subdir_module ) && - test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && + test_must_fail git merge test$test_count.a && + yes "r" | git mergetool subdir/subdir_module && + echo "test$test_count.b" >expect && + test_cmp expect subdir/subdir_module/file15 && git submodule update -N && - test "$(cat subdir/subdir_module/file15)" = "test$test_count.a" && + echo "test$test_count.a" >expect && + test_cmp expect subdir/subdir_module/file15 && git commit -m "branch1 resolved with mergetool" ' @@ -574,22 +655,25 @@ test_expect_success 'directory vs modified submodule' ' test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "l" | git mergetool submod ) && - test "$(cat submod/file16)" = "not a submodule" && + yes "l" | git mergetool submod && + echo "not a submodule" >expect && + test_cmp expect submod/file16 && rm -rf submod.orig && git reset --hard && test_must_fail git merge master && test -n "$(git ls-files -u)" && test ! -e submod.orig && - ( yes "r" | git mergetool submod ) && + yes "r" | git mergetool submod && test -d submod.orig && - test "$(cat submod.orig/file16)" = "not a submodule" && + echo "not a submodule" >expect && + test_cmp expect submod.orig/file16 && rm -r submod.orig && mv submod-movedaside/.git submod && ( cd submod && git clean -f && git reset --hard ) && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && git reset --hard && rm -rf submod-movedaside && @@ -597,17 +681,19 @@ test_expect_success 'directory vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "l" | git mergetool submod ) && + yes "l" | git mergetool submod && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && git reset --hard && git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && test ! -e submod.orig && - ( yes "r" | git mergetool submod ) && - test "$(cat submod/file16)" = "not a submodule" && + yes "r" | git mergetool submod && + echo "not a submodule" >expect && + test_cmp expect submod/file16 && git reset --hard master && ( cd submod && git clean -f && git reset --hard ) && @@ -641,7 +727,7 @@ test_expect_success 'filenames seen by tools start with ./' ' test_config mergetool.myecho.trustExitCode true && test_must_fail git merge master && git mergetool --no-prompt --tool myecho -- both >actual && - grep ^\./both_LOCAL_ actual >/dev/null + grep ^\./both_LOCAL_ actual ' test_lazy_prereq MKTEMP ' @@ -658,8 +744,8 @@ test_expect_success MKTEMP 'temporary filenames are used with mergetool.writeToT test_config mergetool.myecho.trustExitCode true && test_must_fail git merge master && git mergetool --no-prompt --tool myecho -- both >actual && - ! grep ^\./both_LOCAL_ actual >/dev/null && - grep /both_LOCAL_ actual >/dev/null + ! grep ^\./both_LOCAL_ actual && + grep /both_LOCAL_ actual ' test_expect_success 'diff.orderFile configuration is honored' ' diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 6162e2a8e6..4e855bc21b 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -221,5 +221,45 @@ test_expect_success 'repack --keep-pack' ' ) ' -test_done +test_expect_success 'bitmaps are created by default in bare repos' ' + git clone --bare .git bare.git && + git -C bare.git repack -ad && + bitmap=$(ls bare.git/objects/pack/*.bitmap) && + test_path_is_file "$bitmap" +' + +test_expect_success 'incremental repack does not complain' ' + git -C bare.git repack -q 2>repack.err && + test_must_be_empty repack.err +' + +test_expect_success 'bitmaps can be disabled on bare repos' ' + git -c repack.writeBitmaps=false -C bare.git repack -ad && + bitmap=$(ls bare.git/objects/pack/*.bitmap 2>/dev/null || :) && + test -z "$bitmap" +' +test_expect_success 'no bitmaps created if .keep files present' ' + pack=$(ls bare.git/objects/pack/*.pack) && + test_path_is_file "$pack" && + keep=${pack%.pack}.keep && + test_when_finished "rm -f \"\$keep\"" && + >"$keep" && + git -C bare.git repack -ad 2>stderr && + test_must_be_empty stderr && + find bare.git/objects/pack/ -type f -name "*.bitmap" >actual && + test_must_be_empty actual +' + +test_expect_success 'auto-bitmaps do not complain if unavailable' ' + test_config -C bare.git pack.packSizeLimit 1M && + blob=$(test-tool genrandom big $((1024*1024)) | + git -C bare.git hash-object -w --stdin) && + git -C bare.git update-ref refs/tags/big $blob && + git -C bare.git repack -ad 2>stderr && + test_must_be_empty stderr && + find bare.git/objects/pack -type f -name "*.bitmap" >actual && + test_must_be_empty actual +' + +test_done diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 22b9199d59..6bac9ed180 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -279,11 +279,27 @@ test_expect_success 'difftool + mergetool config variables' ' echo branch >expect && git difftool --no-prompt branch >actual && test_cmp expect actual && + git difftool --gui --no-prompt branch >actual && + test_cmp expect actual && # set merge.tool to something bogus, diff.tool to test-tool test_config merge.tool bogus-tool && test_config diff.tool test-tool && git difftool --no-prompt branch >actual && + test_cmp expect actual && + git difftool --gui --no-prompt branch >actual && + test_cmp expect actual && + + # set merge.tool, diff.tool to something bogus, merge.guitool to test-tool + test_config diff.tool bogus-tool && + test_config merge.guitool test-tool && + git difftool --gui --no-prompt branch >actual && + test_cmp expect actual && + + # set merge.tool, diff.tool, merge.guitool to something bogus, diff.guitool to test-tool + test_config merge.guitool bogus-tool && + test_config diff.guitool test-tool && + git difftool --gui --no-prompt branch >actual && test_cmp expect actual ' @@ -546,7 +562,7 @@ do done >actual EOF -test_expect_success SYMLINKS 'difftool --dir-diff --symlink without unstaged changes' ' +test_expect_success SYMLINKS 'difftool --dir-diff --symlinks without unstaged changes' ' cat >expect <<-EOF && file $PWD/file @@ -555,7 +571,7 @@ test_expect_success SYMLINKS 'difftool --dir-diff --symlink without unstaged cha sub/sub $PWD/sub/sub EOF - git difftool --dir-diff --symlink \ + git difftool --dir-diff --symlinks \ --extcmd "./.git/CHECK_SYMLINKS" branch HEAD && test_cmp expect actual ' @@ -705,4 +721,22 @@ test_expect_success SYMLINKS 'difftool --dir-diff handles modified symlinks' ' test_cmp expect actual ' +test_expect_success 'outside worktree' ' + echo 1 >1 && + echo 2 >2 && + test_expect_code 1 nongit git \ + -c diff.tool=echo -c difftool.echo.cmd="echo \$LOCAL \$REMOTE" \ + difftool --no-prompt --no-index ../1 ../2 >actual && + echo "../1 ../2" >expect && + test_cmp expect actual +' + +test_expect_success 'difftool --gui, --tool and --extcmd are mutually exclusive' ' + difftool_test_setup && + test_must_fail git difftool --gui --tool=test-tool && + test_must_fail git difftool --gui --extcmd=cat && + test_must_fail git difftool --tool=test-tool --extcmd=cat && + test_must_fail git difftool --gui --tool=test-tool --extcmd=cat +' + test_done diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 43aa4161cf..7d7b396c23 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -119,33 +119,33 @@ do test_cmp expected actual ' - test_expect_success "grep -w $L (with --column, --invert)" ' + test_expect_success "grep -w $L (with --column, --invert-match)" ' { echo ${HC}file:1:foo mmap bar echo ${HC}file:1:foo_mmap bar echo ${HC}file:1:foo_mmap bar mmap echo ${HC}file:1:foo mmap bar_mmap } >expected && - git grep --column --invert -w -e baz $H -- file >actual && + git grep --column --invert-match -w -e baz $H -- file >actual && test_cmp expected actual ' - test_expect_success "grep $L (with --column, --invert, extended OR)" ' + test_expect_success "grep $L (with --column, --invert-match, extended OR)" ' { echo ${HC}hello_world:6:HeLLo_world } >expected && - git grep --column --invert -e ll --or --not -e _ $H -- hello_world \ + git grep --column --invert-match -e ll --or --not -e _ $H -- hello_world \ >actual && test_cmp expected actual ' - test_expect_success "grep $L (with --column, --invert, extended AND)" ' + test_expect_success "grep $L (with --column, --invert-match, extended AND)" ' { echo ${HC}hello_world:3:Hello world echo ${HC}hello_world:3:Hello_world echo ${HC}hello_world:6:HeLLo_world } >expected && - git grep --column --invert --not -e _ --and --not -e ll $H -- hello_world \ + git grep --column --invert-match --not -e _ --and --not -e ll $H -- hello_world \ >actual && test_cmp expected actual ' @@ -412,7 +412,7 @@ do test_cmp expected actual ' - test_expect_success !PCRE "grep $L with grep.patterntype=perl errors without PCRE" ' + test_expect_success !FAIL_PREREQS,!PCRE "grep $L with grep.patterntype=perl errors without PCRE" ' test_must_fail git -c grep.patterntype=perl grep "foo.*bar" ' @@ -1010,7 +1010,7 @@ test_expect_success 'outside of git repository' ' echo ".gitignore:.*o*" && cat ../expect.full } >../expect.with.ignored && - git grep --no-index --no-exclude o >../actual.full && + git grep --no-index --no-exclude-standard o >../actual.full && test_cmp ../expect.with.ignored ../actual.full ) ' @@ -1051,7 +1051,7 @@ test_expect_success 'outside of git repository with fallbackToNoIndex' ' echo ".gitignore:.*o*" && cat ../expect.full } >../expect.with.ignored && - git -c grep.fallbackToNoIndex grep --no-exclude o >../actual.full && + git -c grep.fallbackToNoIndex grep --no-exclude-standard o >../actual.full && test_cmp ../expect.with.ignored ../actual.full ) ' @@ -1234,7 +1234,7 @@ test_expect_success PCRE 'grep --perl-regexp pattern' ' test_cmp expected actual ' -test_expect_success !PCRE 'grep --perl-regexp pattern errors without PCRE' ' +test_expect_success !FAIL_PREREQS,!PCRE 'grep --perl-regexp pattern errors without PCRE' ' test_must_fail git grep --perl-regexp "foo.*bar" ' @@ -1249,7 +1249,7 @@ test_expect_success LIBPCRE2 "grep -P with (*NO_JIT) doesn't error out" ' ' -test_expect_success !PCRE 'grep -P pattern errors without PCRE' ' +test_expect_success !FAIL_PREREQS,!PCRE 'grep -P pattern errors without PCRE' ' test_must_fail git grep -P "foo.*bar" ' diff --git a/t/t7814-grep-recurse-submodules.sh b/t/t7814-grep-recurse-submodules.sh index fa475d52fa..946f91fa57 100755 --- a/t/t7814-grep-recurse-submodules.sh +++ b/t/t7814-grep-recurse-submodules.sh @@ -14,12 +14,14 @@ test_expect_success 'setup directory structure and submodule' ' echo "(3|4)" >b/b && git add a b && git commit -m "add a and b" && + test_tick && git init submodule && echo "(1|2)d(3|4)" >submodule/a && git -C submodule add a && git -C submodule commit -m "add a" && git submodule add ./submodule && - git commit -m "added submodule" + git commit -m "added submodule" && + test_tick ' test_expect_success 'grep correctly finds patterns in a submodule' ' @@ -65,11 +67,14 @@ test_expect_success 'grep and nested submodules' ' echo "(1|2)d(3|4)" >submodule/sub/a && git -C submodule/sub add a && git -C submodule/sub commit -m "add a" && + test_tick && git -C submodule submodule add ./sub && git -C submodule add sub && git -C submodule commit -m "added sub" && + test_tick && git add submodule && git commit -m "updated submodule" && + test_tick && cat >expect <<-\EOF && a:(1|2)d(3|4) @@ -179,15 +184,18 @@ test_expect_success !MINGW 'grep recurse submodule colon in name' ' echo "(1|2)d(3|4)" >"parent/fi:le" && git -C parent add "fi:le" && git -C parent commit -m "add fi:le" && + test_tick && git init "su:b" && test_when_finished "rm -rf su:b" && echo "(1|2)d(3|4)" >"su:b/fi:le" && git -C "su:b" add "fi:le" && git -C "su:b" commit -m "add fi:le" && + test_tick && git -C parent submodule add "../su:b" "su:b" && git -C parent commit -m "add submodule" && + test_tick && cat >expect <<-\EOF && fi:le:(1|2)d(3|4) @@ -210,15 +218,18 @@ test_expect_success 'grep history with moved submoules' ' echo "(1|2)d(3|4)" >parent/file && git -C parent add file && git -C parent commit -m "add file" && + test_tick && git init sub && test_when_finished "rm -rf sub" && echo "(1|2)d(3|4)" >sub/file && git -C sub add file && git -C sub commit -m "add file" && + test_tick && git -C parent submodule add ../sub dir/sub && git -C parent commit -m "add submodule" && + test_tick && cat >expect <<-\EOF && dir/sub/file:(1|2)d(3|4) @@ -229,6 +240,7 @@ test_expect_success 'grep history with moved submoules' ' git -C parent mv dir/sub sub-moved && git -C parent commit -m "moved submodule" && + test_tick && cat >expect <<-\EOF && file:(1|2)d(3|4) @@ -251,6 +263,7 @@ test_expect_success 'grep using relative path' ' echo "(1|2)d(3|4)" >sub/file && git -C sub add file && git -C sub commit -m "add file" && + test_tick && git init parent && echo "(1|2)d(3|4)" >parent/file && @@ -260,6 +273,7 @@ test_expect_success 'grep using relative path' ' git -C parent add src/file2 && git -C parent submodule add ../sub && git -C parent commit -m "add files and submodule" && + test_tick && # From top works cat >expect <<-\EOF && @@ -293,6 +307,7 @@ test_expect_success 'grep from a subdir' ' echo "(1|2)d(3|4)" >sub/file && git -C sub add file && git -C sub commit -m "add file" && + test_tick && git init parent && mkdir parent/src && @@ -301,6 +316,7 @@ test_expect_success 'grep from a subdir' ' git -C parent submodule add ../sub src/sub && git -C parent submodule add ../sub sub && git -C parent commit -m "add files and submodules" && + test_tick && # Verify grep from root works cat >expect <<-\EOF && @@ -380,11 +396,7 @@ test_expect_success 'grep --recurse-submodules should pass the pattern type alon fi ' -# Recursing down into nested submodules which do not have .gitmodules in their -# working tree does not work yet. This is because config_from_gitmodules() -# uses get_oid() and the latter is still not able to get objects from an -# arbitrary repository (the nested submodule, in this case). -test_expect_failure 'grep --recurse-submodules with submodules without .gitmodules in the working tree' ' +test_expect_success 'grep --recurse-submodules with submodules without .gitmodules in the working tree' ' test_when_finished "git -C submodule checkout .gitmodules" && rm submodule/.gitmodules && git grep --recurse-submodules -e "(.|.)[\d]" >actual && @@ -396,4 +408,25 @@ test_expect_failure 'grep --recurse-submodules with submodules without .gitmodul test_cmp expect actual ' +reset_and_clean () { + git reset --hard && + git clean -fd && + git submodule foreach --recursive 'git reset --hard' && + git submodule foreach --recursive 'git clean -fd' +} + +test_expect_success 'grep --recurse-submodules without --cached considers worktree modifications' ' + reset_and_clean && + echo "A modified line in submodule" >>submodule/a && + echo "submodule/a:A modified line in submodule" >expect && + git grep --recurse-submodules "A modified line in submodule" >actual && + test_cmp expect actual +' + +test_expect_success 'grep --recurse-submodules with --cached ignores worktree modifications' ' + reset_and_clean && + echo "A modified line in submodule" >>submodule/a && + test_must_fail git grep --recurse-submodules --cached "A modified line in submodule" >actual 2>&1 && + test_must_be_empty actual +' test_done diff --git a/t/t8003-blame-corner-cases.sh b/t/t8003-blame-corner-cases.sh index c92a47b6d5..1c5fb1d1f8 100755 --- a/t/t8003-blame-corner-cases.sh +++ b/t/t8003-blame-corner-cases.sh @@ -275,4 +275,40 @@ test_expect_success 'blame file with CRLF core.autocrlf=true' ' grep "A U Thor" actual ' +# Tests the splitting and merging of blame entries in blame_coalesce(). +# The output of blame is the same, regardless of whether blame_coalesce() runs +# or not, so we'd likely only notice a problem if blame crashes or assigned +# blame to the "splitting" commit ('SPLIT' below). +test_expect_success 'blame coalesce' ' + cat >giraffe <<-\EOF && + ABC + DEF + EOF + git add giraffe && + git commit -m "original file" && + oid=$(git rev-parse HEAD) && + + cat >giraffe <<-\EOF && + ABC + SPLIT + DEF + EOF + git add giraffe && + git commit -m "interior SPLIT line" && + + cat >giraffe <<-\EOF && + ABC + DEF + EOF + git add giraffe && + git commit -m "same contents as original" && + + cat >expect <<-EOF && + $oid 1) ABC + $oid 2) DEF + EOF + git -c core.abbrev=40 blame -s giraffe >actual && + test_cmp expect actual +' + test_done diff --git a/t/t8013-blame-ignore-revs.sh b/t/t8013-blame-ignore-revs.sh new file mode 100755 index 0000000000..36dc31eb39 --- /dev/null +++ b/t/t8013-blame-ignore-revs.sh @@ -0,0 +1,274 @@ +#!/bin/sh + +test_description='ignore revisions when blaming' +. ./test-lib.sh + +# Creates: +# A--B--X +# A added line 1 and B added line 2. X makes changes to those lines. Sanity +# check that X is blamed for both lines. +test_expect_success setup ' + test_commit A file line1 && + + echo line2 >>file && + git add file && + test_tick && + git commit -m B && + git tag B && + + test_write_lines line-one line-two >file && + git add file && + test_tick && + git commit -m X && + git tag X && + + git blame --line-porcelain file >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse X >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse X >expect && + test_cmp expect actual + ' + +# Ignore X, make sure A is blamed for line 1 and B for line 2. +test_expect_success ignore_rev_changing_lines ' + git blame --line-porcelain --ignore-rev X file >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse A >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual + ' + +# For ignored revs that have added 'unblamable' lines, attribute those to the +# ignored commit. +# A--B--X--Y +# Where Y changes lines 1 and 2, and adds lines 3 and 4. The added lines ought +# to have nothing in common with "line-one" or "line-two", to keep any +# heuristics from matching them with any lines in the parent. +test_expect_success ignore_rev_adding_unblamable_lines ' + test_write_lines line-one-change line-two-changed y3 y4 >file && + git add file && + test_tick && + git commit -m Y && + git tag Y && + + git rev-parse Y >expect && + git blame --line-porcelain file --ignore-rev Y >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 3" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 4" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual + ' + +# Ignore X and Y, both in separate files. Lines 1 == A, 2 == B. +test_expect_success ignore_revs_from_files ' + git rev-parse X >ignore_x && + git rev-parse Y >ignore_y && + git blame --line-porcelain file --ignore-revs-file ignore_x --ignore-revs-file ignore_y >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse A >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual + ' + +# Ignore X from the config option, Y from a file. +test_expect_success ignore_revs_from_configs_and_files ' + git config --add blame.ignoreRevsFile ignore_x && + git blame --line-porcelain file --ignore-revs-file ignore_y >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse A >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual + ' + +# Override blame.ignoreRevsFile (ignore_x) with an empty string. X should be +# blamed now for lines 1 and 2, since we are no longer ignoring X. +test_expect_success override_ignore_revs_file ' + git blame --line-porcelain file --ignore-revs-file "" --ignore-revs-file ignore_y >blame_raw && + git rev-parse X >expect && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual + ' +test_expect_success bad_files_and_revs ' + test_must_fail git blame file --ignore-rev NOREV 2>err && + test_i18ngrep "cannot find revision NOREV to ignore" err && + + test_must_fail git blame file --ignore-revs-file NOFILE 2>err && + test_i18ngrep "could not open.*: NOFILE" err && + + echo NOREV >ignore_norev && + test_must_fail git blame file --ignore-revs-file ignore_norev 2>err && + test_i18ngrep "invalid object name: NOREV" err + ' + +# For ignored revs that have added 'unblamable' lines, mark those lines with a +# '*' +# A--B--X--Y +# Lines 3 and 4 are from Y and unblamable. This was set up in +# ignore_rev_adding_unblamable_lines. +test_expect_success mark_unblamable_lines ' + git config --add blame.markUnblamableLines true && + + git blame --ignore-rev Y file >blame_raw && + echo "*" >expect && + + sed -n "3p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "4p" blame_raw | cut -c1 >actual && + test_cmp expect actual + ' + +# Commit Z will touch the first two lines. Y touched all four. +# A--B--X--Y--Z +# The blame output when ignoring Z should be: +# ?Y ... 1) +# ?Y ... 2) +# Y ... 3) +# Y ... 4) +# We're checking only the first character +test_expect_success mark_ignored_lines ' + git config --add blame.markIgnoredLines true && + + test_write_lines line-one-Z line-two-Z y3 y4 >file && + git add file && + test_tick && + git commit -m Z && + git tag Z && + + git blame --ignore-rev Z file >blame_raw && + echo "?" >expect && + + sed -n "1p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "2p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "3p" blame_raw | cut -c1 >actual && + ! test_cmp expect actual && + + sed -n "4p" blame_raw | cut -c1 >actual && + ! test_cmp expect actual + ' + +# For ignored revs that added 'unblamable' lines and more recent commits changed +# the blamable lines, mark the unblamable lines with a +# '*' +# A--B--X--Y--Z +# Lines 3 and 4 are from Y and unblamable, as set up in +# ignore_rev_adding_unblamable_lines. Z changed lines 1 and 2. +test_expect_success mark_unblamable_lines_intermediate ' + git config --add blame.markUnblamableLines true && + + git blame --ignore-rev Y file >blame_raw 2>stderr && + echo "*" >expect && + + sed -n "3p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "4p" blame_raw | cut -c1 >actual && + test_cmp expect actual + ' + +# The heuristic called by guess_line_blames() tries to find the size of a +# blame_entry 'e' in the parent's address space. Those calculations need to +# check for negative or zero values for when a blame entry is completely outside +# the window of the parent's version of a file. +# +# This happens when one commit adds several lines (commit B below). A later +# commit (C) changes one line in the middle of B's change. Commit C gets blamed +# for its change, and that breaks up B's change into multiple blame entries. +# When processing B, one of the blame_entries is outside A's window (which was +# zero - it had no lines added on its side of the diff). +# +# A--B--C, ignore B to test the ignore heuristic's boundary checks. +test_expect_success ignored_chunk_negative_parent_size ' + rm -rf .git/ && + git init && + + test_write_lines L1 L2 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m A && + git tag A && + + test_write_lines L1 L2 L3 L4 L5 L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m B && + git tag B && + + test_write_lines L1 L2 L3 L4 xxx L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m C && + git tag C && + + git blame file --ignore-rev B >blame_raw + ' + +# Resetting the repo and creating: +# +# A--B--M +# \ / +# C-+ +# +# 'A' creates a file. B changes line 1, and C changes line 9. M merges. +test_expect_success ignore_merge ' + rm -rf .git/ && + git init && + + test_write_lines L1 L2 L3 L4 L5 L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m A && + git tag A && + + test_write_lines BB L2 L3 L4 L5 L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m B && + git tag B && + + git reset --hard A && + test_write_lines L1 L2 L3 L4 L5 L6 L7 L8 CC >file && + git add file && + test_tick && + git commit -m C && + git tag C && + + test_merge M B && + git blame --line-porcelain file --ignore-rev M >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 9" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse C >expect && + test_cmp expect actual + ' + +test_done diff --git a/t/t8014-blame-ignore-fuzzy.sh b/t/t8014-blame-ignore-fuzzy.sh new file mode 100755 index 0000000000..6e61882b6f --- /dev/null +++ b/t/t8014-blame-ignore-fuzzy.sh @@ -0,0 +1,437 @@ +#!/bin/sh + +test_description='git blame ignore fuzzy heuristic' +. ./test-lib.sh + +pick_author='s/^[0-9a-f^]* *(\([^ ]*\) .*/\1/' + +# Each test is composed of 4 variables: +# titleN - the test name +# aN - the initial content +# bN - the final content +# expectedN - the line numbers from aN that we expect git blame +# on bN to identify, or "Final" if bN itself should +# be identified as the origin of that line. + +# We start at test 2 because setup will show as test 1 +title2="Regression test for partially overlapping search ranges" +cat <<EOF >a2 +1 +2 +3 +abcdef +5 +6 +7 +ijkl +9 +10 +11 +pqrs +13 +14 +15 +wxyz +17 +18 +19 +EOF +cat <<EOF >b2 +abcde +ijk +pqr +wxy +EOF +cat <<EOF >expected2 +4 +8 +12 +16 +EOF + +title3="Combine 3 lines into 2" +cat <<EOF >a3 +if ((maxgrow==0) || + ( single_line_field && (field->dcols < maxgrow)) || + (!single_line_field && (field->drows < maxgrow))) +EOF +cat <<EOF >b3 +if ((maxgrow == 0) || (single_line_field && (field->dcols < maxgrow)) || + (!single_line_field && (field->drows < maxgrow))) { +EOF +cat <<EOF >expected3 +2 +3 +EOF + +title4="Add curly brackets" +cat <<EOF >a4 + if (rows) *rows = field->rows; + if (cols) *cols = field->cols; + if (frow) *frow = field->frow; + if (fcol) *fcol = field->fcol; +EOF +cat <<EOF >b4 + if (rows) { + *rows = field->rows; + } + if (cols) { + *cols = field->cols; + } + if (frow) { + *frow = field->frow; + } + if (fcol) { + *fcol = field->fcol; + } +EOF +cat <<EOF >expected4 +1 +1 +Final +2 +2 +Final +3 +3 +Final +4 +4 +Final +EOF + + +title5="Combine many lines and change case" +cat <<EOF >a5 +for(row=0,pBuffer=field->buf; + row<height; + row++,pBuffer+=width ) +{ + if ((len = (int)( After_End_Of_Data( pBuffer, width ) - pBuffer )) > 0) + { + wmove( win, row, 0 ); + waddnstr( win, pBuffer, len ); +EOF +cat <<EOF >b5 +for (Row = 0, PBuffer = field->buf; Row < Height; Row++, PBuffer += Width) { + if ((Len = (int)(afterEndOfData(PBuffer, Width) - PBuffer)) > 0) { + wmove(win, Row, 0); + waddnstr(win, PBuffer, Len); +EOF +cat <<EOF >expected5 +1 +5 +7 +8 +EOF + +title6="Rename and combine lines" +cat <<EOF >a6 +bool need_visual_update = ((form != (FORM *)0) && + (form->status & _POSTED) && + (form->current==field)); + +if (need_visual_update) + Synchronize_Buffer(form); + +if (single_line_field) +{ + growth = field->cols * amount; + if (field->maxgrow) + growth = Minimum(field->maxgrow - field->dcols,growth); + field->dcols += growth; + if (field->dcols == field->maxgrow) +EOF +cat <<EOF >b6 +bool NeedVisualUpdate = ((Form != (FORM *)0) && (Form->status & _POSTED) && + (Form->current == field)); + +if (NeedVisualUpdate) { + synchronizeBuffer(Form); +} + +if (SingleLineField) { + Growth = field->cols * amount; + if (field->maxgrow) { + Growth = Minimum(field->maxgrow - field->dcols, Growth); + } + field->dcols += Growth; + if (field->dcols == field->maxgrow) { +EOF +cat <<EOF >expected6 +1 +3 +4 +5 +6 +Final +7 +8 +10 +11 +12 +Final +13 +14 +EOF + +# Both lines match identically so position must be used to tie-break. +title7="Same line twice" +cat <<EOF >a7 +abc +abc +EOF +cat <<EOF >b7 +abcd +abcd +EOF +cat <<EOF >expected7 +1 +2 +EOF + +title8="Enforce line order" +cat <<EOF >a8 +abcdef +ghijkl +ab +EOF +cat <<EOF >b8 +ghijk +abcd +EOF +cat <<EOF >expected8 +2 +3 +EOF + +title9="Expand lines and rename variables" +cat <<EOF >a9 +int myFunction(int ArgumentOne, Thing *ArgTwo, Blah XuglyBug) { + Squiggle FabulousResult = squargle(ArgumentOne, *ArgTwo, + XuglyBug) + EwwwGlobalWithAReallyLongNameYepTooLong; + return FabulousResult * 42; +} +EOF +cat <<EOF >b9 +int myFunction(int argument_one, Thing *arg_asdfgh, + Blah xugly_bug) { + Squiggle fabulous_result = squargle(argument_one, + *arg_asdfgh, xugly_bug) + + g_ewww_global_with_a_really_long_name_yep_too_long; + return fabulous_result * 42; +} +EOF +cat <<EOF >expected9 +1 +1 +2 +3 +3 +4 +5 +EOF + +title10="Two close matches versus one less close match" +cat <<EOF >a10 +abcdef +abcdef +ghijkl +EOF +cat <<EOF >b10 +gh +abcdefx +EOF +cat <<EOF >expected10 +Final +2 +EOF + +# The first line of b matches best with the last line of a, but the overall +# match is better if we match it with the the first line of a. +title11="Piggy in the middle" +cat <<EOF >a11 +abcdefg +ijklmn +abcdefgh +EOF +cat <<EOF >b11 +abcdefghx +ijklm +EOF +cat <<EOF >expected11 +1 +2 +EOF + +title12="No trailing newline" +printf "abc\ndef" >a12 +printf "abx\nstu" >b12 +cat <<EOF >expected12 +1 +Final +EOF + +title13="Reorder includes" +cat <<EOF >a13 +#include "c.h" +#include "b.h" +#include "a.h" +#include "e.h" +#include "d.h" +EOF +cat <<EOF >b13 +#include "a.h" +#include "b.h" +#include "c.h" +#include "d.h" +#include "e.h" +EOF +cat <<EOF >expected13 +3 +2 +1 +5 +4 +EOF + +last_test=13 + +test_expect_success setup ' + for i in $(test_seq 2 $last_test) + do + # Append each line in a separate commit to make it easy to + # check which original line the blame output relates to. + + line_count=0 && + while IFS= read line + do + line_count=$((line_count+1)) && + echo "$line" >>"$i" && + git add "$i" && + test_tick && + GIT_AUTHOR_NAME="$line_count" git commit -m "$line_count" + done <"a$i" + done && + + for i in $(test_seq 2 $last_test) + do + # Overwrite the files with the final content. + cp b$i $i && + git add $i + done && + test_tick && + + # Commit the final content all at once so it can all be + # referred to with the same commit ID. + GIT_AUTHOR_NAME=Final git commit -m Final && + + IGNOREME=$(git rev-parse HEAD) +' + +for i in $(test_seq 2 $last_test); do + eval title="\$title$i" + test_expect_success "$title" \ + "git blame -M9 --ignore-rev $IGNOREME $i >output && + sed -e \"$pick_author\" output >actual && + test_cmp expected$i actual" +done + +# This invoked a null pointer dereference when the chunk callback was called +# with a zero length parent chunk and there were no more suspects. +test_expect_success 'Diff chunks with no suspects' ' + test_write_lines xy1 A B C xy1 >file && + git add file && + test_tick && + GIT_AUTHOR_NAME=1 git commit -m 1 && + + test_write_lines xy2 A B xy2 C xy2 >file && + git add file && + test_tick && + GIT_AUTHOR_NAME=2 git commit -m 2 && + REV_2=$(git rev-parse HEAD) && + + test_write_lines xy3 A >file && + git add file && + test_tick && + GIT_AUTHOR_NAME=3 git commit -m 3 && + REV_3=$(git rev-parse HEAD) && + + test_write_lines 1 1 >expected && + + git blame --ignore-rev $REV_2 --ignore-rev $REV_3 file >output && + sed -e "$pick_author" output >actual && + + test_cmp expected actual + ' + +test_expect_success 'position matching' ' + test_write_lines abc def >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=1 git commit -m 1 && + + test_write_lines abc def abc def >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=2 git commit -m 2 && + + test_write_lines abcx defx abcx defx >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=3 git commit -m 3 && + REV_3=$(git rev-parse HEAD) && + + test_write_lines abcy defy abcx defx >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=4 git commit -m 4 && + REV_4=$(git rev-parse HEAD) && + + test_write_lines 1 1 2 2 >expected && + + git blame --ignore-rev $REV_3 --ignore-rev $REV_4 file2 >output && + sed -e "$pick_author" output >actual && + + test_cmp expected actual + ' + +# This fails if each blame entry is processed independently instead of +# processing each diff change in full. +test_expect_success 'preserve order' ' + test_write_lines bcde >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=1 git commit -m 1 && + + test_write_lines bcde fghij >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=2 git commit -m 2 && + + test_write_lines bcde fghij abcd >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=3 git commit -m 3 && + + test_write_lines abcdx fghijx bcdex >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=4 git commit -m 4 && + REV_4=$(git rev-parse HEAD) && + + test_write_lines abcdx fghijy bcdex >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=5 git commit -m 5 && + REV_5=$(git rev-parse HEAD) && + + test_write_lines 1 2 3 >expected && + + git blame --ignore-rev $REV_4 --ignore-rev $REV_5 file3 >output && + sed -e "$pick_author" output >actual && + + test_cmp expected actual + ' + +test_done diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index ee1efcc59d..997f90b42b 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -481,6 +481,20 @@ test_expect_success $PREREQ 'long lines with auto encoding are quoted-printable' grep "Content-Transfer-Encoding: quoted-printable" msgtxt1 ' +test_expect_success $PREREQ 'carriage returns with auto encoding are quoted-printable' ' + clean_fake_sendmail && + cp $patches cr.patch && + printf "this is a line\r\n" >>cr.patch && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + --transfer-encoding=auto \ + --no-validate \ + cr.patch && + grep "Content-Transfer-Encoding: quoted-printable" msgtxt1 +' + for enc in auto quoted-printable base64 do test_expect_success $PREREQ "--validate passes with encoding $enc" ' @@ -1190,7 +1204,7 @@ test_expect_success $PREREQ 'no in-reply-to and no threading' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --no-thread \ - $patches $patches >stdout && + $patches >stdout && ! grep "In-Reply-To: " stdout ' @@ -1210,17 +1224,72 @@ test_expect_success $PREREQ 'sendemail.to works' ' git send-email \ --dry-run \ --from="Example <nobody@example.com>" \ - $patches $patches >stdout && + $patches >stdout && grep "To: Somebody <somebody@ex.com>" stdout ' +test_expect_success $PREREQ 'setup sendemail.identity' ' + git config --replace-all sendemail.to "default@example.com" && + git config --replace-all sendemail.isp.to "isp@example.com" && + git config --replace-all sendemail.cloud.to "cloud@example.com" +' + +test_expect_success $PREREQ 'sendemail.identity: reads the correct identity config' ' + git -c sendemail.identity=cloud send-email \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: cloud@example.com" stdout +' + +test_expect_success $PREREQ 'sendemail.identity: identity overrides sendemail.identity' ' + git -c sendemail.identity=cloud send-email \ + --identity=isp \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: isp@example.com" stdout +' + +test_expect_success $PREREQ 'sendemail.identity: --no-identity clears previous identity' ' + git -c sendemail.identity=cloud send-email \ + --no-identity \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: default@example.com" stdout +' + +test_expect_success $PREREQ 'sendemail.identity: bool identity variable existance overrides' ' + git -c sendemail.identity=cloud \ + -c sendemail.xmailer=true \ + -c sendemail.cloud.xmailer=false \ + send-email \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: cloud@example.com" stdout && + ! grep "X-Mailer" stdout +' + +test_expect_success $PREREQ 'sendemail.identity: bool variable fallback' ' + git -c sendemail.identity=cloud \ + -c sendemail.xmailer=false \ + send-email \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: cloud@example.com" stdout && + ! grep "X-Mailer" stdout +' + test_expect_success $PREREQ '--no-to overrides sendemail.to' ' git send-email \ --dry-run \ --from="Example <nobody@example.com>" \ --no-to \ --to=nobody@example.com \ - $patches $patches >stdout && + $patches >stdout && grep "To: nobody@example.com" stdout && ! grep "To: Somebody <somebody@ex.com>" stdout ' @@ -1231,7 +1300,7 @@ test_expect_success $PREREQ 'sendemail.cc works' ' --dry-run \ --from="Example <nobody@example.com>" \ --to=nobody@example.com \ - $patches $patches >stdout && + $patches >stdout && grep "Cc: Somebody <somebody@ex.com>" stdout ' @@ -1242,7 +1311,7 @@ test_expect_success $PREREQ '--no-cc overrides sendemail.cc' ' --no-cc \ --cc=bodies@example.com \ --to=nobody@example.com \ - $patches $patches >stdout && + $patches >stdout && grep "Cc: bodies@example.com" stdout && ! grep "Cc: Somebody <somebody@ex.com>" stdout ' @@ -1254,7 +1323,7 @@ test_expect_success $PREREQ 'sendemail.bcc works' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server relay.example.com \ - $patches $patches >stdout && + $patches >stdout && grep "RCPT TO:<other@ex.com>" stdout ' @@ -1266,7 +1335,7 @@ test_expect_success $PREREQ '--no-bcc overrides sendemail.bcc' ' --bcc=bodies@example.com \ --to=nobody@example.com \ --smtp-server relay.example.com \ - $patches $patches >stdout && + $patches >stdout && grep "RCPT TO:<bodies@example.com>" stdout && ! grep "RCPT TO:<other@ex.com>" stdout ' @@ -1423,10 +1492,10 @@ test_expect_success $PREREQ 'setup expect' ' EOF ' -test_expect_success $PREREQ 'sendemail.transferencoding=7bit fails on 8bit data' ' +test_expect_success $PREREQ '--transfer-encoding overrides sendemail.transferEncoding' ' clean_fake_sendmail && - git config sendemail.transferEncoding 7bit && - test_must_fail git send-email \ + test_must_fail git -c sendemail.transferEncoding=8bit \ + send-email \ --transfer-encoding=7bit \ --smtp-server="$(pwd)/fake.sendmail" \ email-using-8bit \ @@ -1435,11 +1504,10 @@ test_expect_success $PREREQ 'sendemail.transferencoding=7bit fails on 8bit data' test -z "$(ls msgtxt*)" ' -test_expect_success $PREREQ '--transfer-encoding overrides sendemail.transferEncoding' ' +test_expect_success $PREREQ 'sendemail.transferEncoding via config' ' clean_fake_sendmail && - git config sendemail.transferEncoding 8bit && - test_must_fail git send-email \ - --transfer-encoding=7bit \ + test_must_fail git -c sendemail.transferEncoding=7bit \ + send-email \ --smtp-server="$(pwd)/fake.sendmail" \ email-using-8bit \ 2>errors >out && @@ -1447,16 +1515,15 @@ test_expect_success $PREREQ '--transfer-encoding overrides sendemail.transferEnc test -z "$(ls msgtxt*)" ' -test_expect_success $PREREQ 'sendemail.transferencoding=8bit' ' +test_expect_success $PREREQ 'sendemail.transferEncoding via cli' ' clean_fake_sendmail && - git send-email \ - --transfer-encoding=8bit \ + test_must_fail git send-email \ + --transfer-encoding=7bit \ --smtp-server="$(pwd)/fake.sendmail" \ email-using-8bit \ 2>errors >out && - sed '1,/^$/d' msgtxt1 >actual && - sed '1,/^$/d' email-using-8bit >expected && - test_cmp expected actual + grep "cannot send message as 7bit" errors && + test -z "$(ls msgtxt*)" ' test_expect_success $PREREQ 'setup expect' ' @@ -1773,6 +1840,15 @@ test_expect_success '--dump-aliases must be used alone' ' test_must_fail git send-email --dump-aliases --to=janice@example.com -1 refs/heads/accounting ' +test_expect_success $PREREQ 'aliases and sendemail.identity' ' + test_must_fail git \ + -c sendemail.identity=cloud \ + -c sendemail.aliasesfile=default-aliases \ + -c sendemail.cloud.aliasesfile=cloud-aliases \ + send-email -1 2>stderr && + test_i18ngrep "cloud-aliases" stderr +' + test_sendmail_aliases () { msg="$1" && shift && expect="$@" && diff --git a/t/t9115-git-svn-dcommit-funky-renames.sh b/t/t9115-git-svn-dcommit-funky-renames.sh index 64bb495834..9b44a44bc1 100755 --- a/t/t9115-git-svn-dcommit-funky-renames.sh +++ b/t/t9115-git-svn-dcommit-funky-renames.sh @@ -120,6 +120,4 @@ test_expect_success !MINGW,!UTF8_NFD_TO_NFC 'svn.pathnameencoding=cp932 rename o git svn dcommit ' -stop_httpd - test_done diff --git a/t/t9118-git-svn-funky-branch-names.sh b/t/t9118-git-svn-funky-branch-names.sh index 41a026637f..a159ff96b7 100755 --- a/t/t9118-git-svn-funky-branch-names.sh +++ b/t/t9118-git-svn-funky-branch-names.sh @@ -87,6 +87,4 @@ test_expect_success 'test dcommit to trailing_dotlock branch' ' ) ' -stop_httpd - test_done diff --git a/t/t9120-git-svn-clone-with-percent-escapes.sh b/t/t9120-git-svn-clone-with-percent-escapes.sh index b28a1741e3..40b714df31 100755 --- a/t/t9120-git-svn-clone-with-percent-escapes.sh +++ b/t/t9120-git-svn-clone-with-percent-escapes.sh @@ -74,6 +74,4 @@ test_expect_success 'test clone -s with unescaped space' ' ) ' -stop_httpd - test_done diff --git a/t/t9142-git-svn-shallow-clone.sh b/t/t9142-git-svn-shallow-clone.sh index 9ee23be640..a30730502d 100755 --- a/t/t9142-git-svn-shallow-clone.sh +++ b/t/t9142-git-svn-shallow-clone.sh @@ -26,6 +26,4 @@ test_expect_success 'clone trunk with "-r HEAD"' ' ( cd g && git rev-parse --symbolic --verify HEAD ) ' -stop_httpd - test_done diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 59a13b6a77..141b7fa35e 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -3262,4 +3262,61 @@ test_expect_success PIPE 'V: checkpoint updates tags after tag' ' background_import_still_running ' +### +### series W (get-mark and empty orphan commits) +### + +cat >>W-input <<-W_INPUT_END + commit refs/heads/W-branch + mark :1 + author Full Name <user@company.tld> 1000000000 +0100 + committer Full Name <user@company.tld> 1000000000 +0100 + data 27 + Intentionally empty commit + LFsget-mark :1 + W_INPUT_END + +test_expect_success !MINGW 'W: get-mark & empty orphan commit with no newlines' ' + sed -e s/LFs// W-input | tr L "\n" | git fast-import +' + +test_expect_success !MINGW 'W: get-mark & empty orphan commit with one newline' ' + sed -e s/LFs/L/ W-input | tr L "\n" | git fast-import +' + +test_expect_success !MINGW 'W: get-mark & empty orphan commit with ugly second newline' ' + # Technically, this should fail as it has too many linefeeds + # according to the grammar in fast-import.txt. But, for whatever + # reason, it works. Since using the correct number of newlines + # does not work with older (pre-2.22) versions of git, allow apps + # that used this second-newline workaround to keep working by + # checking it with this test... + sed -e s/LFs/LL/ W-input | tr L "\n" | git fast-import +' + +test_expect_success !MINGW 'W: get-mark & empty orphan commit with erroneous third newline' ' + # ...but do NOT allow more empty lines than that (see previous test). + sed -e s/LFs/LLL/ W-input | tr L "\n" | test_must_fail git fast-import +' + +### +### series X (other new features) +### + +test_expect_success 'X: handling encoding' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/encoding + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + encoding iso-8859-7 + data <<COMMIT + INPUT_END + + printf "Pi: \360\nCOMMIT\n" >>input && + + git fast-import <input && + git cat-file -p encoding | grep $(printf "\360") && + git log -1 --format=%B encoding | grep $(printf "\317\200") +' + test_done diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 5690fe2810..b4004e05c2 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -94,22 +94,83 @@ test_expect_success 'fast-export --show-original-ids | git fast-import' ' test $MUSS = $(git rev-parse --verify refs/tags/muss) ' -test_expect_success 'iso-8859-1' ' +test_expect_success 'reencoding iso-8859-7' ' - git config i18n.commitencoding ISO8859-1 && - # use author and committer name in ISO-8859-1 to match it. - . "$TEST_DIRECTORY"/t3901/8859-1.txt && + test_when_finished "git reset --hard HEAD~1" && + test_config i18n.commitencoding iso-8859-7 && test_tick && echo rosten >file && - git commit -s -m den file && - git fast-export wer^..wer >iso8859-1.fi && - sed "s/wer/i18n/" iso8859-1.fi | + git commit -s -F "$TEST_DIRECTORY/t9350/simple-iso-8859-7-commit-message.txt" file && + git fast-export --reencode=yes wer^..wer >iso-8859-7.fi && + sed "s/wer/i18n/" iso-8859-7.fi | (cd new && git fast-import && + # The commit object, if not re-encoded, would be 240 bytes. + # Removing the "encoding iso-8859-7\n" header drops 20 bytes. + # Re-encoding the Pi character from \xF0 (\360) in iso-8859-7 + # to \xCF\x80 (\317\200) in UTF-8 adds a byte. Check for + # the expected size. + test 221 -eq "$(git cat-file -s i18n)" && + # ...and for the expected translation of bytes. git cat-file commit i18n >actual && - grep "Ãéà óú" actual) + grep $(printf "\317\200") actual && + # Also make sure the commit does not have the "encoding" header + ! grep ^encoding actual) +' + +test_expect_success 'aborting on iso-8859-7' ' + test_when_finished "git reset --hard HEAD~1" && + test_config i18n.commitencoding iso-8859-7 && + echo rosten >file && + git commit -s -F "$TEST_DIRECTORY/t9350/simple-iso-8859-7-commit-message.txt" file && + test_must_fail git fast-export --reencode=abort wer^..wer >iso-8859-7.fi ' + +test_expect_success 'preserving iso-8859-7' ' + + test_when_finished "git reset --hard HEAD~1" && + test_config i18n.commitencoding iso-8859-7 && + echo rosten >file && + git commit -s -F "$TEST_DIRECTORY/t9350/simple-iso-8859-7-commit-message.txt" file && + git fast-export --reencode=no wer^..wer >iso-8859-7.fi && + sed "s/wer/i18n-no-recoding/" iso-8859-7.fi | + (cd new && + git fast-import && + # The commit object, if not re-encoded, is 240 bytes. + # Removing the "encoding iso-8859-7\n" header would drops 20 + # bytes. Re-encoding the Pi character from \xF0 (\360) in + # iso-8859-7 to \xCF\x80 (\317\200) in UTF-8 adds a byte. + # Check for the expected size... + test 240 -eq "$(git cat-file -s i18n-no-recoding)" && + # ...as well as the expected byte. + git cat-file commit i18n-no-recoding >actual && + grep $(printf "\360") actual && + # Also make sure the commit has the "encoding" header + grep ^encoding actual) +' + +test_expect_success 'encoding preserved if reencoding fails' ' + + test_when_finished "git reset --hard HEAD~1" && + test_config i18n.commitencoding iso-8859-7 && + echo rosten >file && + git commit -s -F "$TEST_DIRECTORY/t9350/broken-iso-8859-7-commit-message.txt" file && + git fast-export --reencode=yes wer^..wer >iso-8859-7.fi && + sed "s/wer/i18n-invalid/" iso-8859-7.fi | + (cd new && + git fast-import && + git cat-file commit i18n-invalid >actual && + # Make sure the commit still has the encoding header + grep ^encoding actual && + # Verify that the commit has the expected size; i.e. + # that no bytes were re-encoded to a different encoding. + test 252 -eq "$(git cat-file -s i18n-invalid)" && + # ...and check for the original special bytes + grep $(printf "\360") actual && + grep $(printf "\377") actual) +' + test_expect_success 'import/export-marks' ' git checkout -b marks master && @@ -224,7 +285,6 @@ GIT_COMMITTER_NAME='C O Mitter'; export GIT_COMMITTER_NAME test_expect_success 'setup copies' ' - git config --unset i18n.commitencoding && git checkout -b copy rein && git mv file file3 && git commit -m move1 && diff --git a/t/t9350/broken-iso-8859-7-commit-message.txt b/t/t9350/broken-iso-8859-7-commit-message.txt new file mode 100644 index 0000000000..d06ad75b44 --- /dev/null +++ b/t/t9350/broken-iso-8859-7-commit-message.txt @@ -0,0 +1 @@ +Pi: ð; Invalid: ÿ
\ No newline at end of file diff --git a/t/t9350/simple-iso-8859-7-commit-message.txt b/t/t9350/simple-iso-8859-7-commit-message.txt new file mode 100644 index 0000000000..8b3f0c3dba --- /dev/null +++ b/t/t9350/simple-iso-8859-7-commit-message.txt @@ -0,0 +1 @@ +Pi: ð
\ No newline at end of file diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 729cd25770..5856563068 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -326,8 +326,4 @@ test_expect_success 'submit from worktree' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9801-git-p4-branch.sh b/t/t9801-git-p4-branch.sh index 6a86d6996b..67ff2711f5 100755 --- a/t/t9801-git-p4-branch.sh +++ b/t/t9801-git-p4-branch.sh @@ -151,7 +151,7 @@ test_expect_success 'import depot, branch detection, branchList branch definitio ' test_expect_success 'restart p4d' ' - kill_p4d && + stop_and_cleanup_p4d && start_p4d ' @@ -411,6 +411,46 @@ test_expect_failure 'git p4 clone file subset branch' ' ) ' +# Check that excluded files are omitted during import +test_expect_success 'git p4 clone complex branches with excluded files' ' + test_when_finished cleanup_git && + test_create_repo "$git" && + ( + cd "$git" && + git config git-p4.branchList branch1:branch2 && + git config --add git-p4.branchList branch1:branch3 && + git config --add git-p4.branchList branch1:branch4 && + git config --add git-p4.branchList branch1:branch5 && + git config --add git-p4.branchList branch1:branch6 && + git p4 clone --dest=. --detect-branches -//depot/branch1/file2 -//depot/branch2/file2 -//depot/branch3/file2 -//depot/branch4/file2 -//depot/branch5/file2 -//depot/branch6/file2 //depot@all && + git log --all --graph --decorate --stat && + git reset --hard p4/depot/branch1 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_file file3 && + git reset --hard p4/depot/branch2 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_missing file3 && + git reset --hard p4/depot/branch3 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_missing file3 && + git reset --hard p4/depot/branch4 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_file file3 && + git reset --hard p4/depot/branch5 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_file file3 && + git reset --hard p4/depot/branch6 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_missing file3 + ) +' + # From a report in http://stackoverflow.com/questions/11893688 # where --use-client-spec caused branch prefixes not to be removed; # every file in git appeared into a subdirectory of the branch name. @@ -505,7 +545,7 @@ test_expect_success 'use-client-spec detect-branches skips files in branches' ' ' test_expect_success 'restart p4d' ' - kill_p4d && + stop_and_cleanup_p4d && start_p4d ' @@ -610,8 +650,96 @@ test_expect_success 'Update a file in git side and submit to P4 using client vie ) ' -test_expect_success 'kill p4d' ' - kill_p4d +test_expect_success 'restart p4d (case folding enabled)' ' + stop_and_cleanup_p4d && + start_p4d -C1 +' + +# +# 1: //depot/main/mf1 +# 2: integrate //depot/main/... -> //depot/branch1/... +# 3: //depot/main/mf2 +# 4: //depot/BRANCH1/B1f3 +# 5: //depot/branch1/b1f4 +# +test_expect_success !CASE_INSENSITIVE_FS 'basic p4 branches for case folding' ' + ( + cd "$cli" && + mkdir -p main && + + echo mf1 >main/mf1 && + p4 add main/mf1 && + p4 submit -d "main/mf1" && + + p4 integrate //depot/main/... //depot/branch1/... && + p4 submit -d "integrate main to branch1" && + + echo mf2 >main/mf2 && + p4 add main/mf2 && + p4 submit -d "main/mf2" && + + mkdir BRANCH1 && + echo B1f3 >BRANCH1/B1f3 && + p4 add BRANCH1/B1f3 && + p4 submit -d "BRANCH1/B1f3" && + + echo b1f4 >branch1/b1f4 && + p4 add branch1/b1f4 && + p4 submit -d "branch1/b1f4" + ) +' + +# Check that files are properly split across branches when ignorecase is set +test_expect_success !CASE_INSENSITIVE_FS 'git p4 clone, branchList branch definition, ignorecase' ' + test_when_finished cleanup_git && + test_create_repo "$git" && + ( + cd "$git" && + git config git-p4.branchList main:branch1 && + git config --type=bool core.ignoreCase true && + git p4 clone --dest=. --detect-branches //depot@all && + + git log --all --graph --decorate --stat && + + git reset --hard p4/master && + test_path_is_file mf1 && + test_path_is_file mf2 && + test_path_is_missing B1f3 && + test_path_is_missing b1f4 && + + git reset --hard p4/depot/branch1 && + test_path_is_file mf1 && + test_path_is_missing mf2 && + test_path_is_file B1f3 && + test_path_is_file b1f4 + ) +' + +# Check that files are properly split across branches when ignorecase is set, use-client-spec case +test_expect_success !CASE_INSENSITIVE_FS 'git p4 clone with client-spec, branchList branch definition, ignorecase' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + test_create_repo "$git" && + ( + cd "$git" && + git config git-p4.branchList main:branch1 && + git config --type=bool core.ignoreCase true && + git p4 clone --dest=. --use-client-spec --detect-branches //depot@all && + + git log --all --graph --decorate --stat && + + git reset --hard p4/master && + test_path_is_file mf1 && + test_path_is_file mf2 && + test_path_is_missing B1f3 && + test_path_is_missing b1f4 && + + git reset --hard p4/depot/branch1 && + test_path_is_file mf1 && + test_path_is_missing mf2 && + test_path_is_file B1f3 && + test_path_is_file b1f4 + ) ' test_done diff --git a/t/t9802-git-p4-filetype.sh b/t/t9802-git-p4-filetype.sh index 9978352d78..94edebe272 100755 --- a/t/t9802-git-p4-filetype.sh +++ b/t/t9802-git-p4-filetype.sh @@ -333,8 +333,4 @@ test_expect_success SYMLINKS 'empty symlink target' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9803-git-p4-shell-metachars.sh b/t/t9803-git-p4-shell-metachars.sh index d5c3675100..2913277013 100755 --- a/t/t9803-git-p4-shell-metachars.sh +++ b/t/t9803-git-p4-shell-metachars.sh @@ -105,8 +105,4 @@ test_expect_success 'branch with shell char' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9804-git-p4-label.sh b/t/t9804-git-p4-label.sh index e30f80e617..3236457106 100755 --- a/t/t9804-git-p4-label.sh +++ b/t/t9804-git-p4-label.sh @@ -108,8 +108,4 @@ test_expect_failure 'two labels on the same changelist' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9805-git-p4-skip-submit-edit.sh b/t/t9805-git-p4-skip-submit-edit.sh index 5fbf904dc8..90ef647db7 100755 --- a/t/t9805-git-p4-skip-submit-edit.sh +++ b/t/t9805-git-p4-skip-submit-edit.sh @@ -98,8 +98,4 @@ test_expect_success 'no config, edited' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh index 3f5291b857..4e794a01bf 100755 --- a/t/t9806-git-p4-options.sh +++ b/t/t9806-git-p4-options.sh @@ -300,9 +300,4 @@ test_expect_success 'use --git-dir option and GIT_DIR' ' test_path_is_file "$git"/cli_file2.t ' - -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 850d979119..eaaae414a1 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -593,8 +593,4 @@ test_expect_success 'update a shelve involving moved and copied files' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9808-git-p4-chdir.sh b/t/t9808-git-p4-chdir.sh index 11d2b5102c..58a9b3b71e 100755 --- a/t/t9808-git-p4-chdir.sh +++ b/t/t9808-git-p4-chdir.sh @@ -83,8 +83,4 @@ test_expect_success SYMLINKS 'p4 client root symlink should stay symbolic' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh index 897b3c3034..3cff1fce1b 100755 --- a/t/t9809-git-p4-client-view.sh +++ b/t/t9809-git-p4-client-view.sh @@ -836,8 +836,4 @@ test_expect_success 'quotes on both sides' ' git_verify "cdir 1/file11" "cdir 1/file12" ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9810-git-p4-rcs.sh b/t/t9810-git-p4-rcs.sh index cc53debe19..57b533dc6f 100755 --- a/t/t9810-git-p4-rcs.sh +++ b/t/t9810-git-p4-rcs.sh @@ -360,8 +360,4 @@ test_expect_failure 'Add keywords in git which do not match the default p4 value ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9811-git-p4-label-import.sh b/t/t9811-git-p4-label-import.sh index 602b0a5d5c..c1446f26ab 100755 --- a/t/t9811-git-p4-label-import.sh +++ b/t/t9811-git-p4-label-import.sh @@ -191,7 +191,7 @@ test_expect_success 'tag that cannot be exported' ' ( cd "$cli" && p4 sync ... && - !(p4 labels | grep GIT_TAG_ON_A_BRANCH) + ! p4 labels | grep GIT_TAG_ON_A_BRANCH ) ' @@ -259,9 +259,4 @@ test_expect_success 'importing labels with missing revisions' ' ) ' - -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9812-git-p4-wildcards.sh b/t/t9812-git-p4-wildcards.sh index 0206771fbb..254a7c2446 100755 --- a/t/t9812-git-p4-wildcards.sh +++ b/t/t9812-git-p4-wildcards.sh @@ -211,8 +211,4 @@ test_expect_success 'wildcard files requiring keyword scrub' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9813-git-p4-preserve-users.sh b/t/t9813-git-p4-preserve-users.sh index 783c6ad165..fd018c87a8 100755 --- a/t/t9813-git-p4-preserve-users.sh +++ b/t/t9813-git-p4-preserve-users.sh @@ -138,8 +138,4 @@ test_expect_success 'not preserving user with mixed authorship' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh index 60baa06e27..468767cbf4 100755 --- a/t/t9814-git-p4-rename.sh +++ b/t/t9814-git-p4-rename.sh @@ -242,8 +242,4 @@ test_expect_success P4D_HAVE_CONFIGURABLE_RUN_MOVE_ALLOW \ ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9815-git-p4-submit-fail.sh b/t/t9815-git-p4-submit-fail.sh index eaf03a6563..9779dc0d11 100755 --- a/t/t9815-git-p4-submit-fail.sh +++ b/t/t9815-git-p4-submit-fail.sh @@ -422,8 +422,4 @@ test_expect_success 'cleanup chmod after submit cancel' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9816-git-p4-locked.sh b/t/t9816-git-p4-locked.sh index d048bd33fa..932841003c 100755 --- a/t/t9816-git-p4-locked.sh +++ b/t/t9816-git-p4-locked.sh @@ -138,8 +138,4 @@ test_expect_failure 'move with lock taken' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9817-git-p4-exclude.sh b/t/t9817-git-p4-exclude.sh index aac568eadf..ec3d937c6a 100755 --- a/t/t9817-git-p4-exclude.sh +++ b/t/t9817-git-p4-exclude.sh @@ -22,7 +22,9 @@ test_expect_success 'create exclude repo' ' mkdir -p wanted discard && echo wanted >wanted/foo && echo discard >discard/foo && - p4 add wanted/foo discard/foo && + echo discard_file >discard_file && + echo discard_file_not >discard_file_not && + p4 add wanted/foo discard/foo discard_file discard_file_not && p4 submit -d "initial revision" ) ' @@ -33,7 +35,9 @@ test_expect_success 'check the repo was created correctly' ' ( cd "$git" && test_path_is_file wanted/foo && - test_path_is_file discard/foo + test_path_is_file discard/foo && + test_path_is_file discard_file && + test_path_is_file discard_file_not ) ' @@ -43,7 +47,21 @@ test_expect_success 'clone, excluding part of repo' ' ( cd "$git" && test_path_is_file wanted/foo && - test_path_is_missing discard/foo + test_path_is_missing discard/foo && + test_path_is_file discard_file && + test_path_is_file discard_file_not + ) +' + +test_expect_success 'clone, excluding single file, no trailing /' ' + test_when_finished cleanup_git && + git p4 clone -//depot/discard_file --dest="$git" //depot/...@all && + ( + cd "$git" && + test_path_is_file wanted/foo && + test_path_is_file discard/foo && + test_path_is_missing discard_file && + test_path_is_file discard_file_not ) ' @@ -52,20 +70,39 @@ test_expect_success 'clone, then sync with exclude' ' git p4 clone -//depot/discard/... --dest="$git" //depot/...@all && ( cd "$cli" && - p4 edit wanted/foo discard/foo && + p4 edit wanted/foo discard/foo discard_file_not && date >>wanted/foo && date >>discard/foo && + date >>discard_file_not && p4 submit -d "updating" && cd "$git" && git p4 sync -//depot/discard/... && test_path_is_file wanted/foo && - test_path_is_missing discard/foo + test_path_is_missing discard/foo && + test_path_is_file discard_file && + test_path_is_file discard_file_not ) ' -test_expect_success 'kill p4d' ' - kill_p4d +test_expect_success 'clone, then sync with exclude, no trailing /' ' + test_when_finished cleanup_git && + git p4 clone -//depot/discard/... -//depot/discard_file --dest="$git" //depot/...@all && + ( + cd "$cli" && + p4 edit wanted/foo discard/foo discard_file_not && + date >>wanted/foo && + date >>discard/foo && + date >>discard_file_not && + p4 submit -d "updating" && + + cd "$git" && + git p4 sync -//depot/discard/... -//depot/discard_file && + test_path_is_file wanted/foo && + test_path_is_missing discard/foo && + test_path_is_missing discard_file && + test_path_is_file discard_file_not + ) ' test_done diff --git a/t/t9818-git-p4-block.sh b/t/t9818-git-p4-block.sh index ce7cb22ad3..0db7ab9918 100755 --- a/t/t9818-git-p4-block.sh +++ b/t/t9818-git-p4-block.sh @@ -146,8 +146,4 @@ test_expect_success 'Clone repo with self-sizing block size' ' test_line_count \> 10 log ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9819-git-p4-case-folding.sh b/t/t9819-git-p4-case-folding.sh index d808c008c1..600ce1e0b0 100755 --- a/t/t9819-git-p4-case-folding.sh +++ b/t/t9819-git-p4-case-folding.sh @@ -53,8 +53,4 @@ test_expect_failure 'Clone UC repo with lc name' ' test_must_fail git p4 clone //depot/uc/... ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9820-git-p4-editor-handling.sh b/t/t9820-git-p4-editor-handling.sh index 3c22f74bd4..fa1bba1dd9 100755 --- a/t/t9820-git-p4-editor-handling.sh +++ b/t/t9820-git-p4-editor-handling.sh @@ -31,8 +31,4 @@ test_expect_success 'EDITOR with options' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9821-git-p4-path-variations.sh b/t/t9821-git-p4-path-variations.sh index 81e46acfa8..ef80f1690b 100755 --- a/t/t9821-git-p4-path-variations.sh +++ b/t/t9821-git-p4-path-variations.sh @@ -193,8 +193,4 @@ test_expect_success 'Add a new file and clone path with new file (ignorecase)' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9822-git-p4-path-encoding.sh b/t/t9822-git-p4-path-encoding.sh index c78477c19b..572d395498 100755 --- a/t/t9822-git-p4-path-encoding.sh +++ b/t/t9822-git-p4-path-encoding.sh @@ -7,6 +7,13 @@ test_description='Clone repositories with non ASCII paths' UTF8_ESCAPED="a-\303\244_o-\303\266_u-\303\274.txt" ISO8859_ESCAPED="a-\344_o-\366_u-\374.txt" +ISO8859="$(printf "$ISO8859_ESCAPED")" && +echo content123 >"$ISO8859" && +rm "$ISO8859" || { + skip_all="fs does not accept ISO-8859-1 filenames" + test_done +} + test_expect_success 'start p4d' ' start_p4d ' @@ -67,8 +74,4 @@ test_expect_success 'Delete iso8859-1 encoded paths and clone' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9823-git-p4-mock-lfs.sh b/t/t9823-git-p4-mock-lfs.sh index 1f2dc369bf..88b76dc4d6 100755 --- a/t/t9823-git-p4-mock-lfs.sh +++ b/t/t9823-git-p4-mock-lfs.sh @@ -185,8 +185,4 @@ test_expect_success 'Run git p4 submit in repo configured with large file system ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9824-git-p4-git-lfs.sh b/t/t9824-git-p4-git-lfs.sh index ed80ca858c..a28dbbdd56 100755 --- a/t/t9824-git-p4-git-lfs.sh +++ b/t/t9824-git-p4-git-lfs.sh @@ -287,8 +287,4 @@ test_expect_success 'Add big files to repo and store files in LFS based on compr ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9825-git-p4-handle-utf16-without-bom.sh b/t/t9825-git-p4-handle-utf16-without-bom.sh index 1551845dc1..f049ff8229 100755 --- a/t/t9825-git-p4-handle-utf16-without-bom.sh +++ b/t/t9825-git-p4-handle-utf16-without-bom.sh @@ -43,8 +43,4 @@ test_expect_failure 'clone depot with invalid UTF-16 file in non-verbose mode' ' git p4 clone --dest="$git" //depot ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9826-git-p4-keep-empty-commits.sh b/t/t9826-git-p4-keep-empty-commits.sh index fa8b9daf1f..fd64afe064 100755 --- a/t/t9826-git-p4-keep-empty-commits.sh +++ b/t/t9826-git-p4-keep-empty-commits.sh @@ -127,8 +127,4 @@ test_expect_success 'Clone repo subdir with all history' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9827-git-p4-change-filetype.sh b/t/t9827-git-p4-change-filetype.sh index 7433998f47..d3670bd7a2 100755 --- a/t/t9827-git-p4-change-filetype.sh +++ b/t/t9827-git-p4-change-filetype.sh @@ -59,8 +59,4 @@ test_expect_success SYMLINKS 'change symbolic link to file' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9828-git-p4-map-user.sh b/t/t9828-git-p4-map-user.sh index e20395c89f..ca6c2942bd 100755 --- a/t/t9828-git-p4-map-user.sh +++ b/t/t9828-git-p4-map-user.sh @@ -54,8 +54,4 @@ test_expect_success 'Clone repo root path with all history' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9829-git-p4-jobs.sh b/t/t9829-git-p4-jobs.sh index 971aeeea1f..88cfb1fcd3 100755 --- a/t/t9829-git-p4-jobs.sh +++ b/t/t9829-git-p4-jobs.sh @@ -92,8 +92,4 @@ test_expect_success 'check log message of changelist with more jobs' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9830-git-p4-symlink-dir.sh b/t/t9830-git-p4-symlink-dir.sh index 2ad1b0810d..3fb6960c18 100755 --- a/t/t9830-git-p4-symlink-dir.sh +++ b/t/t9830-git-p4-symlink-dir.sh @@ -36,8 +36,4 @@ test_expect_success 'symlinked directory' ' ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9831-git-p4-triggers.sh b/t/t9831-git-p4-triggers.sh index be44c9751a..d743ca33ee 100755 --- a/t/t9831-git-p4-triggers.sh +++ b/t/t9831-git-p4-triggers.sh @@ -96,8 +96,4 @@ test_expect_success 'submit description with extra info lines from verbose p4 ch ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9832-unshelve.sh b/t/t9832-unshelve.sh index 41c09f11f4..e9276c48f4 100755 --- a/t/t9832-unshelve.sh +++ b/t/t9832-unshelve.sh @@ -22,7 +22,10 @@ test_expect_success 'init depot' ' : >file_to_move && p4 add file_to_delete && p4 add file_to_move && - p4 submit -d "add files to delete" + p4 submit -d "add files to delete" && + echo file_to_integrate >file_to_integrate && + p4 add file_to_integrate && + p4 submit -d "add file to integrate" ) ' @@ -40,6 +43,7 @@ test_expect_success 'create shelved changelist' ' p4 delete file_to_delete && p4 edit file_to_move && p4 move file_to_move moved_file && + p4 integrate file_to_integrate integrated_file && p4 opened && p4 shelve -i <<EOF Change: new @@ -53,6 +57,7 @@ Files: //depot/file_to_delete //depot/file_to_move //depot/moved_file + //depot/integrated_file EOF ) && @@ -65,6 +70,7 @@ EOF test_path_is_file file2 && test_cmp file1 "$cli"/file1 && test_cmp file2 "$cli"/file2 && + test_cmp file_to_integrate "$cli"/integrated_file && test_path_is_missing file_to_delete && test_path_is_missing file_to_move && test_path_is_file moved_file @@ -174,8 +180,5 @@ test_expect_success 'unshelve specifying the origin' ' test_path_is_file file_to_shelve ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' test_done diff --git a/t/t9833-errors.sh b/t/t9833-errors.sh index 277d347012..e22369ccdf 100755 --- a/t/t9833-errors.sh +++ b/t/t9833-errors.sh @@ -45,36 +45,4 @@ test_expect_success 'ticket logged out' ' ) ' -test_expect_success 'create group with short ticket expiry' ' - P4TICKETS="$cli/tickets" && - echo "newpassword" | p4 login && - p4_add_user short_expiry_user && - p4 -u short_expiry_user passwd -P password && - p4 group -i <<-EOF && - Group: testgroup - Timeout: 3 - Users: short_expiry_user - EOF - - p4 users | grep short_expiry_user -' - -test_expect_success 'git operation with expired ticket' ' - P4TICKETS="$cli/tickets" && - P4USER=short_expiry_user && - echo "password" | p4 login && - ( - cd "$git" && - git p4 sync && - sleep 5 && - test_must_fail git p4 sync 2>errmsg && - grep "failure accessing depot" errmsg - ) -' - -test_expect_success 'kill p4d' ' - kill_p4d -' - - test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 3a2c6326d8..54f8ce18cb 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -28,10 +28,10 @@ complete () # # (2) A test makes sure that common subcommands are included in the # completion for "git <TAB>", and a plumbing is excluded. "add", -# "filter-branch" and "ls-files" are listed for this. +# "rebase" and "ls-files" are listed for this. -GIT_TESTING_ALL_COMMAND_LIST='add checkout check-attr filter-branch ls-files' -GIT_TESTING_PORCELAIN_COMMAND_LIST='add checkout filter-branch' +GIT_TESTING_ALL_COMMAND_LIST='add checkout check-attr rebase ls-files' +GIT_TESTING_PORCELAIN_COMMAND_LIST='add checkout rebase' . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" @@ -1392,12 +1392,12 @@ test_expect_success 'basic' ' # built-in grep -q "^add \$" out && # script - grep -q "^filter-branch \$" out && + grep -q "^rebase \$" out && # plumbing ! grep -q "^ls-files \$" out && - run_completion "git f" && - ! grep -q -v "^f" out + run_completion "git r" && + ! grep -q -v "^r" out ' test_expect_success 'double dash "git" itself' ' @@ -1437,6 +1437,7 @@ test_expect_success 'double dash "git checkout"' ' --guess Z --no-guess Z --no-... Z + --overlay Z EOF ' @@ -1483,6 +1484,12 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' +test_expect_success 'completion.commands removes multiple commands' ' + test_config completion.commands "-cherry -mergetool" && + git --list-cmds=list-mainporcelain,list-complete,config >out && + ! grep -E "^(cherry|mergetool)$" out +' + test_expect_success 'setup for integration tests' ' echo content >file1 && echo more >file2 && @@ -1691,6 +1698,69 @@ do ' done +test_expect_success 'git config - section' ' + test_completion "git config br" <<-\EOF + branch.Z + browser.Z + EOF +' + +test_expect_success 'git config - variable name' ' + test_completion "git config log.d" <<-\EOF + log.date Z + log.decorate Z + EOF +' + +test_expect_success 'git config - value' ' + test_completion "git config color.pager " <<-\EOF + false Z + true Z + EOF +' + +test_expect_success 'git -c - section' ' + test_completion "git -c br" <<-\EOF + branch.Z + browser.Z + EOF +' + +test_expect_success 'git -c - variable name' ' + test_completion "git -c log.d" <<-\EOF + log.date=Z + log.decorate=Z + EOF +' + +test_expect_success 'git -c - value' ' + test_completion "git -c color.pager=" <<-\EOF + false Z + true Z + EOF +' + +test_expect_success 'git clone --config= - section' ' + test_completion "git clone --config=br" <<-\EOF + branch.Z + browser.Z + EOF +' + +test_expect_success 'git clone --config= - variable name' ' + test_completion "git clone --config=log.d" <<-\EOF + log.date=Z + log.decorate=Z + EOF +' + +test_expect_success 'git clone --config= - value' ' + test_completion "git clone --config=color.pager=" <<-\EOF + false Z + true Z + EOF +' + test_expect_success 'sourcing the completion script clears cached commands' ' __git_compute_all_commands && verbose test -n "$__git_all_commands" && @@ -1699,7 +1769,7 @@ test_expect_success 'sourcing the completion script clears cached commands' ' ' test_expect_success 'sourcing the completion script clears cached merge strategies' ' - GIT_TEST_GETTEXT_POISON= && + GIT_TEST_GETTEXT_POISON=false && __git_compute_merge_strategies && verbose test -n "$__git_merge_strategies" && . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 5cadedb2a9..88bc733ad6 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -211,8 +211,24 @@ test_expect_success 'prompt - merge' ' test_expect_success 'prompt - cherry-pick' ' printf " (master|CHERRY-PICKING)" >expected && - test_must_fail git cherry-pick b1 && - test_when_finished "git reset --hard" && + test_must_fail git cherry-pick b1 b1^ && + test_when_finished "git cherry-pick --abort" && + __git_ps1 >"$actual" && + test_cmp expected "$actual" && + git reset --merge && + test_must_fail git rev-parse CHERRY_PICK_HEAD && + __git_ps1 >"$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - revert' ' + printf " (master|REVERTING)" >expected && + test_must_fail git revert b1^ b1 && + test_when_finished "git revert --abort" && + __git_ps1 >"$actual" && + test_cmp expected "$actual" && + git reset --merge && + test_must_fail git rev-parse REVERT_HEAD && __git_ps1 >"$actual" && test_cmp expected "$actual" ' diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 92cf8f812c..87bf3a2287 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -116,6 +116,13 @@ remove_cr () { tr '\015' Q | sed -e 's/Q$//' } +# Generate an output of $1 bytes of all zeroes (NULs, not ASCII zeroes). +# If $1 is 'infinity', output forever or until the receiving pipe stops reading, +# whichever comes first. +generate_zero_bytes () { + test-tool genzeros "$@" +} + # In some bourne shell implementations, the "unset" builtin returns # nonzero status when a variable to be unset was not set in the first # place. @@ -226,6 +233,129 @@ test_merge () { git tag "$1" } +# Efficiently create <nr> commits, each with a unique number (from 1 to <nr> +# by default) in the commit message. +# +# Usage: test_commit_bulk [options] <nr> +# -C <dir>: +# Run all git commands in directory <dir> +# --ref=<n>: +# ref on which to create commits (default: HEAD) +# --start=<n>: +# number commit messages from <n> (default: 1) +# --message=<msg>: +# use <msg> as the commit mesasge (default: "commit %s") +# --filename=<fn>: +# modify <fn> in each commit (default: %s.t) +# --contents=<string>: +# place <string> in each file (default: "content %s") +# --id=<string>: +# shorthand to use <string> and %s in message, filename, and contents +# +# The message, filename, and contents strings are evaluated by printf, with the +# first "%s" replaced by the current commit number. So you can do: +# +# test_commit_bulk --filename=file --contents="modification %s" +# +# to have every commit touch the same file, but with unique content. +# +test_commit_bulk () { + tmpfile=.bulk-commit.input + indir=. + ref=HEAD + n=1 + message='commit %s' + filename='%s.t' + contents='content %s' + while test $# -gt 0 + do + case "$1" in + -C) + indir=$2 + shift + ;; + --ref=*) + ref=${1#--*=} + ;; + --start=*) + n=${1#--*=} + ;; + --message=*) + message=${1#--*=} + ;; + --filename=*) + filename=${1#--*=} + ;; + --contents=*) + contents=${1#--*=} + ;; + --id=*) + message="${1#--*=} %s" + filename="${1#--*=}-%s.t" + contents="${1#--*=} %s" + ;; + -*) + BUG "invalid test_commit_bulk option: $1" + ;; + *) + break + ;; + esac + shift + done + total=$1 + + add_from= + if git -C "$indir" rev-parse --verify "$ref" + then + add_from=t + fi + + while test "$total" -gt 0 + do + test_tick && + echo "commit $ref" + printf 'author %s <%s> %s\n' \ + "$GIT_AUTHOR_NAME" \ + "$GIT_AUTHOR_EMAIL" \ + "$GIT_AUTHOR_DATE" + printf 'committer %s <%s> %s\n' \ + "$GIT_COMMITTER_NAME" \ + "$GIT_COMMITTER_EMAIL" \ + "$GIT_COMMITTER_DATE" + echo "data <<EOF" + printf "$message\n" $n + echo "EOF" + if test -n "$add_from" + then + echo "from $ref^0" + add_from= + fi + printf "M 644 inline $filename\n" $n + echo "data <<EOF" + printf "$contents\n" $n + echo "EOF" + echo + n=$((n + 1)) + total=$((total - 1)) + done >"$tmpfile" + + git -C "$indir" \ + -c fastimport.unpacklimit=0 \ + fast-import <"$tmpfile" || return 1 + + # This will be left in place on failure, which may aid debugging. + rm -f "$tmpfile" + + # If we updated HEAD, then be nice and update the index and working + # tree, too. + if test "$ref" = "HEAD" + then + git -C "$indir" checkout -f HEAD || return 1 + fi + +} + # This function helps systems where core.filemode=false is set. # Use it instead of plain 'chmod +x' to set or unset the executable bit # of a file in the working directory and add it to the index. @@ -302,6 +432,26 @@ test_unset_prereq () { } test_set_prereq () { + if test -n "$GIT_TEST_FAIL_PREREQS_INTERNAL" + then + case "$1" in + # The "!" case is handled below with + # test_unset_prereq() + !*) + ;; + # (Temporary?) whitelist of things we can't easily + # pretend not to support + SYMLINKS) + ;; + # Inspecting whether GIT_TEST_FAIL_PREREQS is on + # should be unaffected. + FAIL_PREREQS) + ;; + *) + return + esac + fi + case "$1" in !*) test_unset_prereq "${1#!}" @@ -430,7 +580,7 @@ test_expect_failure () { export test_prereq if ! test_skip "$@" then - say >&3 "checking known breakage: $2" + say >&3 "checking known breakage of $TEST_NUMBER.$test_count '$1': $2" if test_run_ "$2" expecting_failure then test_known_broken_ok_ "$1" @@ -450,7 +600,7 @@ test_expect_success () { export test_prereq if ! test_skip "$@" then - say >&3 "expecting success: $2" + say >&3 "expecting success of $TEST_NUMBER.$test_count '$1': $2" if test_run_ "$2" then test_ok_ "$1" @@ -586,6 +736,15 @@ test_dir_is_empty () { fi } +# Check if the file exists and has a size greater than zero +test_file_not_empty () { + if ! test -s "$1" + then + echo "'$1' is not a non-empty file." + false + fi +} + test_path_is_missing () { if test -e "$1" then @@ -872,6 +1031,21 @@ test_cmp_rev () { fi } +# Compare paths respecting core.ignoreCase +test_cmp_fspath () { + if test "x$1" = "x$2" + then + return 0 + fi + + if test true != "$(git config --get --type=bool core.ignorecase)" + then + return 1 + fi + + test "x$(echo "$1" | tr A-Z a-z)" = "x$(echo "$2" | tr A-Z a-z)" +} + # Print a sequence of integers in increasing order, either with # two arguments (start and end): # @@ -927,6 +1101,34 @@ test_when_finished () { } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" } +# This function can be used to schedule some commands to be run +# unconditionally at the end of the test script, e.g. to stop a daemon: +# +# test_expect_success 'test git daemon' ' +# git daemon & +# daemon_pid=$! && +# test_atexit 'kill $daemon_pid' && +# hello world +# ' +# +# The commands will be executed before the trash directory is removed, +# i.e. the atexit commands will still be able to access any pidfiles or +# socket files. +# +# Note that these commands will be run even when a test script run +# with '--immediate' fails. Be careful with your atexit commands to +# minimize any changes to the failed state. + +test_atexit () { + # We cannot detect when we are in a subshell in general, but by + # doing so on Bash is better than nothing (the test will + # silently pass on other shells). + test "${BASH_SUBSHELL-0}" = 0 || + error "bug in test script: test_atexit does nothing in a subshell" + test_atexit_cleanup="{ $* + } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_atexit_cleanup" +} + # Most tests can use the created repository, but some may need to create more. # Usage: test_create_repo <directory> test_create_repo () { @@ -971,62 +1173,20 @@ perl () { command "$PERL_PATH" "$@" 2>&7 } 7>&2 2>&4 -# Is the value one of the various ways to spell a boolean true/false? -test_normalize_bool () { - git -c magic.variable="$1" config --bool magic.variable 2>/dev/null -} - -# Given a variable $1, normalize the value of it to one of "true", -# "false", or "auto" and store the result to it. -# -# test_tristate GIT_TEST_HTTPD -# -# A variable set to an empty string is set to 'false'. -# A variable set to 'false' or 'auto' keeps its value. -# Anything else is set to 'true'. -# An unset variable defaults to 'auto'. -# -# The last rule is to allow people to set the variable to an empty -# string and export it to decline testing the particular feature -# for versions both before and after this change. We used to treat -# both unset and empty variable as a signal for "do not test" and -# took any non-empty string as "please test". - -test_tristate () { - if eval "test x\"\${$1+isset}\" = xisset" - then - # explicitly set - eval " - case \"\$$1\" in - '') $1=false ;; - auto) ;; - *) $1=\$(test_normalize_bool \$$1 || echo true) ;; - esac - " - else - eval "$1=auto" - fi -} - # Exit the test suite, either by skipping all remaining tests or by -# exiting with an error. If "$1" is "auto", we then we assume we were -# opportunistically trying to set up some tests and we skip. If it is -# "true", then we report a failure. +# exiting with an error. If our prerequisite variable $1 falls back +# on a default assume we were opportunistically trying to set up some +# tests and we skip. If it is explicitly "true", then we report a failure. # # The error/skip message should be given by $2. # test_skip_or_die () { - case "$1" in - auto) + if ! git env--helper --type=bool --default=false --exit-code $1 + then skip_all=$2 test_done - ;; - true) - error "$2" - ;; - *) - error "BUG: test tristate is '$1' (real error: $2)" - esac + fi + error "$2" } # The following mingw_* functions obey POSIX shell syntax, but are actually @@ -1195,6 +1355,12 @@ depacketize () { ' } +# Converts base-16 data into base-8. The output is given as a sequence of +# escaped octals, suitable for consumption by 'printf'. +hex2oct () { + perl -ne 'printf "\\%03o", hex for /../g' +} + # Set the hash algorithm in use to $1. Only useful when testing the testsuite. test_set_hash () { test_hash_algo="$1" @@ -1264,6 +1430,13 @@ test_oid () { eval "printf '%s' \"\${$var}\"" } +# Insert a slash into an object ID so it can be used to reference a location +# under ".git/objects". For example, "deadbeef..." becomes "de/adbeef..". +test_oid_to_path () { + local basename=${1#??} + echo "${1%$basename}/$basename" +} + # Choose a port number based on the test script's number and store it in # the given variable name, unless that variable already contains a number. test_set_port () { @@ -1289,7 +1462,7 @@ test_set_port () { port=$(($port + 10000)) fi ;; - *[^0-9]*|0*) + *[!0-9]*|0*) error >&7 "invalid port number: $port" ;; *) diff --git a/t/test-lib.sh b/t/test-lib.sh index 42b1a0aa7f..ee602c4d9c 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -57,6 +57,13 @@ fi . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS export PERL_PATH SHELL_PATH +# Disallow the use of abbreviated options in the test suite by default +if test -z "${GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS}" +then + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=true + export GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS +fi + ################################################################ # It appears that people try to run tests without building... "${GIT_TEST_INSTALLED:-$GIT_BUILD_DIR}/git$X" >/dev/null @@ -147,10 +154,28 @@ do --stress) stress=t ;; --stress=*) + echo "error: --stress does not accept an argument: '$opt'" >&2 + echo "did you mean --stress-jobs=${opt#*=} or --stress-limit=${opt#*=}?" >&2 + exit 1 + ;; + --stress-jobs=*) + stress=t; stress=${opt#--*=} case "$stress" in - *[^0-9]*|0*|"") - echo "error: --stress=<N> requires the number of jobs to run" >&2 + *[!0-9]*|0*|"") + echo "error: --stress-jobs=<N> requires the number of jobs to run" >&2 + exit 1 + ;; + *) # Good. + ;; + esac + ;; + --stress-limit=*) + stress=t; + stress_limit=${opt#--*=} + case "$stress_limit" in + *[!0-9]*|0*|"") + echo "error: --stress-limit=<N> requires the number of repetitions" >&2 exit 1 ;; *) # Good. @@ -187,6 +212,8 @@ fi TEST_STRESS_JOB_SFX="${GIT_TEST_STRESS_JOB_NR:+.stress-$GIT_TEST_STRESS_JOB_NR}" TEST_NAME="$(basename "$0" .sh)" +TEST_NUMBER="${TEST_NAME%%-*}" +TEST_NUMBER="${TEST_NUMBER#t}" TEST_RESULTS_DIR="$TEST_OUTPUT_DIRECTORY/test-results" TEST_RESULTS_BASE="$TEST_RESULTS_DIR/$TEST_NAME$TEST_STRESS_JOB_SFX" TRASH_DIRECTORY="trash directory.$TEST_NAME$TEST_STRESS_JOB_SFX" @@ -242,8 +269,10 @@ then exit 1 ' TERM INT - cnt=0 - while ! test -e "$stressfail" + cnt=1 + while ! test -e "$stressfail" && + { test -z "$stress_limit" || + test $cnt -le $stress_limit ; } do $TEST_SHELL_PATH "$0" "$@" >"$TEST_RESULTS_BASE.stress-$job_nr.out" 2>&1 & test_pid=$! @@ -266,6 +295,7 @@ then if test -f "$stressfail" then + stress_exit=1 echo "Log(s) of failed test run(s):" for failed_job_nr in $(sort -n "$stressfail") do @@ -479,6 +509,9 @@ EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 LF=' ' +# Single quote +SQ=\' + # UTF-8 ZERO WIDTH NON-JOINER, which HFS+ ignores # when case-folding filenames u200c=$(printf '\342\200\214') @@ -606,6 +639,10 @@ test_external_has_tap=0 die () { code=$? + # This is responsible for running the atexit commands even when a + # test script run with '--immediate' fails, or when the user hits + # ctrl-C, i.e. when 'test_done' is not invoked at all. + test_atexit_handler || code=$? if test -n "$GIT_EXIT_OK" then exit $code @@ -617,7 +654,10 @@ die () { GIT_EXIT_OK= trap 'die' EXIT -trap 'exit $?' INT TERM HUP +# Disable '-x' tracing, because with some shells, notably dash, it +# prevents running the cleanup commands when a test script run with +# '--verbose-log -x' is interrupted. +trap '{ code=$?; set +x; } 2>/dev/null; exit $code' INT TERM HUP # The user-facing functions are loaded from a separate file so that # test_perf subshells can have them too @@ -1028,9 +1068,28 @@ write_junit_xml_testcase () { junit_have_testcase=t } +test_atexit_cleanup=: +test_atexit_handler () { + # In a succeeding test script 'test_atexit_handler' is invoked + # twice: first from 'test_done', then from 'die' in the trap on + # EXIT. + # This condition and resetting 'test_atexit_cleanup' below makes + # sure that the registered cleanup commands are run only once. + test : != "$test_atexit_cleanup" || return 0 + + setup_malloc_check + test_eval_ "$test_atexit_cleanup" + test_atexit_cleanup=: + teardown_malloc_check +} + test_done () { GIT_EXIT_OK=t + # Run the atexit commands _before_ the trash directory is + # removed, so the commands can access pidfiles and socket files. + test_atexit_handler + if test -n "$write_junit_xml" && test -n "$junit_xml_path" then test -n "$junit_have_testcase" || { @@ -1313,7 +1372,11 @@ then fi fi -# Provide an implementation of the 'yes' utility +# Provide an implementation of the 'yes' utility; the upper bound +# limit is there to help Windows that cannot stop this loop from +# wasting cycles when the downstream stops reading, so do not be +# tempted to turn it into an infinite loop. cf. 6129c930 ("test-lib: +# limit the output of the yes utility", 2016-02-02) yes () { if test $# = 0 then @@ -1330,6 +1393,25 @@ yes () { done } +# The GIT_TEST_FAIL_PREREQS code hooks into test_set_prereq(), and +# thus needs to be set up really early, and set an internal variable +# for convenience so the hot test_set_prereq() codepath doesn't need +# to call "git env--helper". Only do that work if needed by seeing if +# GIT_TEST_FAIL_PREREQS is set at all. +GIT_TEST_FAIL_PREREQS_INTERNAL= +if test -n "$GIT_TEST_FAIL_PREREQS" +then + if git env--helper --type=bool --default=0 --exit-code GIT_TEST_FAIL_PREREQS + then + GIT_TEST_FAIL_PREREQS_INTERNAL=true + test_set_prereq FAIL_PREREQS + fi +else + test_lazy_prereq FAIL_PREREQS ' + git env--helper --type=bool --default=0 --exit-code GIT_TEST_FAIL_PREREQS + ' +fi + # Fix some commands on Windows uname_s=$(uname -s) case $uname_s in @@ -1380,14 +1462,13 @@ test -z "$NO_GETTEXT" && test_set_prereq GETTEXT if test -n "$GIT_TEST_GETTEXT_POISON_ORIG" then GIT_TEST_GETTEXT_POISON=$GIT_TEST_GETTEXT_POISON_ORIG + export GIT_TEST_GETTEXT_POISON unset GIT_TEST_GETTEXT_POISON_ORIG fi -# Can we rely on git's output in the C locale? -if test -z "$GIT_TEST_GETTEXT_POISON" -then - test_set_prereq C_LOCALE_OUTPUT -fi +test_lazy_prereq C_LOCALE_OUTPUT ' + ! git env--helper --type=bool --default=0 --exit-code GIT_TEST_GETTEXT_POISON +' if test -z "$GIT_TEST_CHECK_CACHE_TREE" then @@ -1462,7 +1543,7 @@ test_lazy_prereq NOT_ROOT ' ' test_lazy_prereq JGIT ' - type jgit + jgit --version ' # SANITY is about "can you correctly predict what the filesystem would |