diff options
Diffstat (limited to 't')
358 files changed, 19110 insertions, 3164 deletions
diff --git a/t/Makefile b/t/Makefile index 1bb06c36f2..96317a35f4 100644 --- a/t/Makefile +++ b/t/Makefile @@ -8,6 +8,7 @@ #GIT_TEST_OPTS = --verbose --debug SHELL_PATH ?= $(SHELL) +TEST_SHELL_PATH ?= $(SHELL_PATH) PERL_PATH ?= /usr/bin/perl TAR ?= $(TAR) RM ?= rm -f @@ -23,6 +24,7 @@ endif # Shell quote; SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) +TEST_SHELL_PATH_SQ = $(subst ','\'',$(TEST_SHELL_PATH)) PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH)) TEST_RESULTS_DIRECTORY_SQ = $(subst ','\'',$(TEST_RESULTS_DIRECTORY)) @@ -42,11 +44,11 @@ failed: test -z "$$failed" || $(MAKE) $$failed prove: pre-clean $(TEST_LINT) - @echo "*** prove ***"; $(PROVE) --exec '$(SHELL_PATH_SQ)' $(GIT_PROVE_OPTS) $(T) :: $(GIT_TEST_OPTS) + @echo "*** prove ***"; $(PROVE) --exec '$(TEST_SHELL_PATH_SQ)' $(GIT_PROVE_OPTS) $(T) :: $(GIT_TEST_OPTS) $(MAKE) clean-except-prove-cache $(T): - @echo "*** $@ ***"; '$(SHELL_PATH_SQ)' $@ $(GIT_TEST_OPTS) + @echo "*** $@ ***"; '$(TEST_SHELL_PATH_SQ)' $@ $(GIT_TEST_OPTS) pre-clean: $(RM) -r '$(TEST_RESULTS_DIRECTORY_SQ)' @@ -84,9 +84,10 @@ appropriately before running "make". -x:: Turn on shell tracing (i.e., `set -x`) during the tests - themselves. Implies `--verbose`. Note that in non-bash shells, - this can cause failures in some tests which redirect and test - the output of shell functions. Use with caution. + themselves. Implies `--verbose`. + Ignored in test scripts that set the variable 'test_untraceable' + to a non-empty value, unless it's run with a Bash version + supporting BASH_XTRACEFD, i.e. v4.1 or later. -d:: --debug:: @@ -292,6 +293,28 @@ and know what setup is needed for it. Or when you want to run everything up to a certain test. +Running tests with special setups +--------------------------------- + +The whole test suite could be run to test some special features +that cannot be easily covered by a few specific test cases. These +could be enabled by running the test suite with correct GIT_TEST_ +environment set. + +GIT_TEST_SPLIT_INDEX=<boolean> forces split-index mode on the whole +test suite. Accept any boolean values that are accepted by git-config. + +GIT_TEST_FULL_IN_PACK_ARRAY=<boolean> exercises the uncommon +pack-objects code path where there are more than 1024 packs even if +the actual number of packs in repository is below this limit. Accept +any boolean values that are accepted by git-config. + +GIT_TEST_OE_SIZE=<n> exercises the uncommon pack-objects code path +where we do not cache object size in memory and read it from existing +packs on demand. This normally only happens when the object size is +over 2GB. This variable forces the code path on any object larger than +<n> bytes. + Naming Tests ------------ @@ -332,13 +355,10 @@ Writing Tests ------------- The test script is written as a shell script. It should start -with the standard "#!/bin/sh" with copyright notices, and an +with the standard "#!/bin/sh", and an assignment to variable 'test_description', like this: #!/bin/sh - # - # Copyright (c) 2005 Junio C Hamano - # test_description='xxx test (option --frotz) @@ -455,6 +475,22 @@ Don't: causing the next test to start in an unexpected directory. Do so inside a subshell if necessary. + - save and verify the standard error of compound commands, i.e. group + commands, subshells, and shell functions (except test helper + functions like 'test_must_fail') like this: + + ( cd dir && git cmd ) 2>error && + test_cmp expect error + + When running the test with '-x' tracing, then the trace of commands + executed in the compound command will be included in standard error + as well, quite possibly throwing off the subsequent checks examining + the output. Instead, save only the relevant git command's standard + error: + + ( cd dir && git cmd 2>../error ) && + test_cmp expect error + - Break the TAP output The raw output from your test may be interpreted by a TAP harness. TAP @@ -658,7 +694,7 @@ library for your script to use. test_expect_code 1 git merge "merge msg" B master ' - - test_must_fail <git-command> + - test_must_fail [<options>] <git-command> Run a git command and ensure it fails in a controlled way. Use this instead of "! <git-command>". When git-command dies due to a @@ -666,17 +702,32 @@ library for your script to use. treats it as just another expected failure, which would let such a bug go unnoticed. - - test_might_fail <git-command> + Accepts the following options: + + ok=<signal-name>[,<...>]: + Don't treat an exit caused by the given signal as error. + Multiple signals can be specified as a comma separated list. + Currently recognized signal names are: sigpipe, success. + (Don't use 'success', use 'test_might_fail' instead.) + + - test_might_fail [<options>] <git-command> Similar to test_must_fail, but tolerate success, too. Use this instead of "<git-command> || :" to catch failures due to segv. + Accepts the same options as test_must_fail. + - test_cmp <expected> <actual> Check whether the content of the <actual> file matches the <expected> file. This behaves like "cmp" but produces more helpful output when the test is run with "-v" option. + - test_cmp_rev <expected> <actual> + + Check whether the <expected> rev points to the same commit as the + <actual> rev. + - test_line_count (= | -lt | -ge | ...) <length> <file> Check whether a file has the length it is expected to. @@ -808,6 +859,18 @@ use these, and "test_set_prereq" for how to define your own. Git was compiled with support for PCRE. Wrap any tests that use git-grep --perl-regexp or git-grep -P in these. + - LIBPCRE1 + + Git was compiled with PCRE v1 support via + USE_LIBPCRE1=YesPlease. Wrap any PCRE using tests that for some + reason need v1 of the PCRE library instead of v2 in these. + + - LIBPCRE2 + + Git was compiled with PCRE v2 support via + USE_LIBPCRE2=YesPlease. Wrap any PCRE using tests that for some + reason need v2 of the PCRE library instead of v1 in these. + - CASE_INSENSITIVE_FS Test is run on a case insensitive file system. diff --git a/t/check-non-portable-shell.pl b/t/check-non-portable-shell.pl index 03dc9d2852..e07f028437 100755 --- a/t/check-non-portable-shell.pl +++ b/t/check-non-portable-shell.pl @@ -21,6 +21,7 @@ while (<>) { /^\s*declare\s+/ and err 'arrays/declare not portable'; /^\s*[^#]\s*which\s/ and err 'which is not portable (please use type)'; /\btest\s+[^=]*==/ and err '"test a == b" is not portable (please use =)'; + /\bwc -l.*"\s*=/ and err '`"$(wc -l)"` is not portable (please use test_line_count)'; /\bexport\s+[A-Za-z0-9_]*=/ and err '"export FOO=bar" is not portable (please use FOO=bar && export FOO)'; # this resets our $. for each file close ARGV if eof; diff --git a/t/helper/.gitignore b/t/helper/.gitignore index 721650256e..2bad28af92 100644 --- a/t/helper/.gitignore +++ b/t/helper/.gitignore @@ -1,37 +1,5 @@ -/test-chmtime -/test-ctype -/test-config -/test-date -/test-delta -/test-dump-cache-tree -/test-dump-split-index -/test-dump-untracked-cache -/test-fake-ssh -/test-scrap-cache-tree -/test-genrandom -/test-hashmap -/test-index-version -/test-lazy-init-name-hash -/test-line-buffer -/test-match-trees -/test-mergesort -/test-mktemp -/test-online-cpus -/test-parse-options -/test-path-utils -/test-prio-queue -/test-read-cache -/test-ref-store -/test-regex -/test-revision-walking -/test-run-command -/test-sha1 -/test-sha1-array -/test-sigchain -/test-strcmp-offset -/test-string-list -/test-submodule-config -/test-subprocess -/test-svn-fe -/test-urlmatch-normalization -/test-wildmatch +* +!*.sh +!*.[ch] +!*.gitignore + diff --git a/t/helper/test-chmtime.c b/t/helper/test-chmtime.c index e760256406..aa22af48c2 100644 --- a/t/helper/test-chmtime.c +++ b/t/helper/test-chmtime.c @@ -5,32 +5,43 @@ * * The mtime can be changed to an absolute value: * - * test-chmtime =<seconds> file... + * test-tool chmtime =<seconds> file... * * Relative to the current time as returned by time(3): * - * test-chmtime =+<seconds> (or =-<seconds>) file... + * test-tool chmtime =+<seconds> (or =-<seconds>) file... * * Or relative to the current mtime of the file: * - * test-chmtime <seconds> file... - * test-chmtime +<seconds> (or -<seconds>) file... + * test-tool chmtime <seconds> file... + * test-tool chmtime +<seconds> (or -<seconds>) file... * * Examples: * - * To just print the mtime use --verbose and set the file mtime offset to 0: + * To print the mtime and the file name use --verbose and set + * the file mtime offset to 0: * - * test-chmtime -v +0 file + * test-tool chmtime -v +0 file + * + * To print only the mtime use --get: + * + * test-tool chmtime --get file * * To set the mtime to current time: * - * test-chmtime =+0 file + * test-tool chmtime =+0 file + * + * To set the file mtime offset to +1 and print the new value: + * + * test-tool chmtime --get +1 file * */ +#include "test-tool.h" #include "git-compat-util.h" #include <utime.h> -static const char usage_str[] = "-v|--verbose (+|=|=+|=-|-)<seconds> <file>..."; +static const char usage_str[] = + "(-v|--verbose|-g|--get) (+|=|=+|=-|-)<seconds> <file>..."; static int timespec_arg(const char *arg, long int *set_time, int *set_eq) { @@ -46,7 +57,6 @@ static int timespec_arg(const char *arg, long int *set_time, int *set_eq) } *set_time = strtol(timespec, &test, 10); if (*test) { - fprintf(stderr, "Not a base-10 integer: %s\n", arg + 1); return 0; } if ((*set_eq && *set_time < 0) || *set_eq == 2) { @@ -56,9 +66,10 @@ static int timespec_arg(const char *arg, long int *set_time, int *set_eq) return 1; } -int cmd_main(int argc, const char **argv) +int cmd__chmtime(int argc, const char **argv) { static int verbose; + static int get; int i = 1; /* no mtime change by default */ @@ -68,18 +79,34 @@ int cmd_main(int argc, const char **argv) if (argc < 3) goto usage; - if (strcmp(argv[i], "--verbose") == 0 || strcmp(argv[i], "-v") == 0) { + if (strcmp(argv[i], "--get") == 0 || strcmp(argv[i], "-g") == 0) { + get = 1; + ++i; + } else if (strcmp(argv[i], "--verbose") == 0 || strcmp(argv[i], "-v") == 0) { verbose = 1; ++i; } - if (timespec_arg(argv[i], &set_time, &set_eq)) + + if (i == argc) { + goto usage; + } + + if (timespec_arg(argv[i], &set_time, &set_eq)) { ++i; - else + } else { + if (get == 0) { + fprintf(stderr, "Not a base-10 integer: %s\n", argv[i] + 1); + goto usage; + } + } + + if (i == argc) goto usage; for (; i < argc; i++) { struct stat sb; struct utimbuf utb; + uintmax_t mtime; if (stat(argv[i], &sb) < 0) { fprintf(stderr, "Failed to stat %s: %s\n", @@ -99,8 +126,10 @@ int cmd_main(int argc, const char **argv) utb.actime = sb.st_atime; utb.modtime = set_eq ? set_time : sb.st_mtime + set_time; - if (verbose) { - uintmax_t mtime = utb.modtime < 0 ? 0: utb.modtime; + mtime = utb.modtime < 0 ? 0: utb.modtime; + if (get) { + printf("%"PRIuMAX"\n", mtime); + } else if (verbose) { printf("%"PRIuMAX"\t%s\n", mtime, argv[i]); } diff --git a/t/helper/test-config.c b/t/helper/test-config.c index 1a7b8bd3d6..214003d5b2 100644 --- a/t/helper/test-config.c +++ b/t/helper/test-config.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "config.h" #include "string-list.h" @@ -32,7 +33,7 @@ * Examples: * * To print the value with highest priority for key "foo.bAr Baz.rock": - * test-config get_value "foo.bAr Baz.rock" + * test-tool config get_value "foo.bAr Baz.rock" * */ @@ -77,7 +78,7 @@ static int early_config_cb(const char *var, const char *value, void *vdata) return 0; } -int cmd_main(int argc, const char **argv) +int cmd__config(int argc, const char **argv) { int i, val; const char *v; diff --git a/t/helper/test-ctype.c b/t/helper/test-ctype.c index bb72c47df5..92c4c2313e 100644 --- a/t/helper/test-ctype.c +++ b/t/helper/test-ctype.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" static int rc; @@ -28,7 +29,7 @@ static int is_in(const char *s, int ch) #define LOWER "abcdefghijklmnopqrstuvwxyz" #define UPPER "ABCDEFGHIJKLMNOPQRSTUVWXYZ" -int cmd_main(int argc, const char **argv) +int cmd__ctype(int argc, const char **argv) { TEST_CLASS(isdigit, DIGIT); TEST_CLASS(isspace, " \n\r\t"); diff --git a/t/helper/test-date.c b/t/helper/test-date.c index f414a3ac67..a0837371ab 100644 --- a/t/helper/test-date.c +++ b/t/helper/test-date.c @@ -1,12 +1,14 @@ +#include "test-tool.h" #include "cache.h" static const char *usage_msg = "\n" -" test-date relative [time_t]...\n" -" test-date show:<format> [time_t]...\n" -" test-date parse [date]...\n" -" test-date approxidate [date]...\n" -" test-date is64bit\n" -" test-date time_t-is64bit\n"; +" test-tool date relative [time_t]...\n" +" test-tool date show:<format> [time_t]...\n" +" test-tool date parse [date]...\n" +" test-tool date approxidate [date]...\n" +" test-tool date timestamp [date]...\n" +" test-tool date is64bit\n" +" test-tool date time_t-is64bit\n"; static void show_relative_dates(const char **argv, struct timeval *now) { @@ -71,7 +73,16 @@ static void parse_approxidate(const char **argv, struct timeval *now) } } -int cmd_main(int argc, const char **argv) +static void parse_approx_timestamp(const char **argv, struct timeval *now) +{ + for (; *argv; argv++) { + timestamp_t t; + t = approxidate_relative(*argv, now); + printf("%s -> %"PRItime"\n", *argv, t); + } +} + +int cmd__date(int argc, const char **argv) { struct timeval now; const char *x; @@ -95,6 +106,8 @@ int cmd_main(int argc, const char **argv) parse_dates(argv+1, &now); else if (!strcmp(*argv, "approxidate")) parse_approxidate(argv+1, &now); + else if (!strcmp(*argv, "timestamp")) + parse_approx_timestamp(argv+1, &now); else if (!strcmp(*argv, "is64bit")) return sizeof(timestamp_t) == 8 ? 0 : 1; else if (!strcmp(*argv, "time_t-is64bit")) diff --git a/t/helper/test-delta.c b/t/helper/test-delta.c index 591730adc4..34c7259248 100644 --- a/t/helper/test-delta.c +++ b/t/helper/test-delta.c @@ -8,14 +8,15 @@ * published by the Free Software Foundation. */ +#include "test-tool.h" #include "git-compat-util.h" #include "delta.h" #include "cache.h" static const char usage_str[] = - "test-delta (-d|-p) <from_file> <data_file> <out_file>"; + "test-tool delta (-d|-p) <from_file> <data_file> <out_file>"; -int cmd_main(int argc, const char **argv) +int cmd__delta(int argc, const char **argv) { int fd; struct stat st; diff --git a/t/helper/test-drop-caches.c b/t/helper/test-drop-caches.c new file mode 100644 index 0000000000..838760898b --- /dev/null +++ b/t/helper/test-drop-caches.c @@ -0,0 +1,165 @@ +#include "test-tool.h" +#include "git-compat-util.h" + +#if defined(GIT_WINDOWS_NATIVE) + +static int cmd_sync(void) +{ + char Buffer[MAX_PATH]; + DWORD dwRet; + char szVolumeAccessPath[] = "\\\\.\\X:"; + HANDLE hVolWrite; + int success = 0; + + dwRet = GetCurrentDirectory(MAX_PATH, Buffer); + if ((0 == dwRet) || (dwRet > MAX_PATH)) + return error("Error getting current directory"); + + if ((Buffer[0] < 'A') || (Buffer[0] > 'Z')) + return error("Invalid drive letter '%c'", Buffer[0]); + + szVolumeAccessPath[4] = Buffer[0]; + hVolWrite = CreateFile(szVolumeAccessPath, GENERIC_READ | GENERIC_WRITE, + FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING, 0, NULL); + if (INVALID_HANDLE_VALUE == hVolWrite) + return error("Unable to open volume for writing, need admin access"); + + success = FlushFileBuffers(hVolWrite); + if (!success) + error("Unable to flush volume"); + + CloseHandle(hVolWrite); + + return !success; +} + +#define STATUS_SUCCESS (0x00000000L) +#define STATUS_PRIVILEGE_NOT_HELD (0xC0000061L) + +typedef enum _SYSTEM_INFORMATION_CLASS { + SystemMemoryListInformation = 80, +} SYSTEM_INFORMATION_CLASS; + +typedef enum _SYSTEM_MEMORY_LIST_COMMAND { + MemoryCaptureAccessedBits, + MemoryCaptureAndResetAccessedBits, + MemoryEmptyWorkingSets, + MemoryFlushModifiedList, + MemoryPurgeStandbyList, + MemoryPurgeLowPriorityStandbyList, + MemoryCommandMax +} SYSTEM_MEMORY_LIST_COMMAND; + +static BOOL GetPrivilege(HANDLE TokenHandle, LPCSTR lpName, int flags) +{ + BOOL bResult; + DWORD dwBufferLength; + LUID luid; + TOKEN_PRIVILEGES tpPreviousState; + TOKEN_PRIVILEGES tpNewState; + + dwBufferLength = 16; + bResult = LookupPrivilegeValueA(0, lpName, &luid); + if (bResult) { + tpNewState.PrivilegeCount = 1; + tpNewState.Privileges[0].Luid = luid; + tpNewState.Privileges[0].Attributes = 0; + bResult = AdjustTokenPrivileges(TokenHandle, 0, &tpNewState, + (DWORD)((LPBYTE)&(tpNewState.Privileges[1]) - (LPBYTE)&tpNewState), + &tpPreviousState, &dwBufferLength); + if (bResult) { + tpPreviousState.PrivilegeCount = 1; + tpPreviousState.Privileges[0].Luid = luid; + tpPreviousState.Privileges[0].Attributes = flags != 0 ? 2 : 0; + bResult = AdjustTokenPrivileges(TokenHandle, 0, &tpPreviousState, + dwBufferLength, 0, 0); + } + } + return bResult; +} + +static int cmd_dropcaches(void) +{ + HANDLE hProcess = GetCurrentProcess(); + HANDLE hToken; + HMODULE ntdll; + DWORD(WINAPI *NtSetSystemInformation)(INT, PVOID, ULONG); + SYSTEM_MEMORY_LIST_COMMAND command; + int status; + + if (!OpenProcessToken(hProcess, TOKEN_QUERY | TOKEN_ADJUST_PRIVILEGES, &hToken)) + return error("Can't open current process token"); + + if (!GetPrivilege(hToken, "SeProfileSingleProcessPrivilege", 1)) + return error("Can't get SeProfileSingleProcessPrivilege"); + + CloseHandle(hToken); + + ntdll = LoadLibrary("ntdll.dll"); + if (!ntdll) + return error("Can't load ntdll.dll, wrong Windows version?"); + + NtSetSystemInformation = + (DWORD(WINAPI *)(INT, PVOID, ULONG))GetProcAddress(ntdll, "NtSetSystemInformation"); + if (!NtSetSystemInformation) + return error("Can't get function addresses, wrong Windows version?"); + + command = MemoryPurgeStandbyList; + status = NtSetSystemInformation( + SystemMemoryListInformation, + &command, + sizeof(SYSTEM_MEMORY_LIST_COMMAND) + ); + if (status == STATUS_PRIVILEGE_NOT_HELD) + error("Insufficient privileges to purge the standby list, need admin access"); + else if (status != STATUS_SUCCESS) + error("Unable to execute the memory list command %d", status); + + FreeLibrary(ntdll); + + return status; +} + +#elif defined(__linux__) + +static int cmd_sync(void) +{ + return system("sync"); +} + +static int cmd_dropcaches(void) +{ + return system("echo 3 | sudo tee /proc/sys/vm/drop_caches"); +} + +#elif defined(__APPLE__) + +static int cmd_sync(void) +{ + return system("sync"); +} + +static int cmd_dropcaches(void) +{ + return system("sudo purge"); +} + +#else + +static int cmd_sync(void) +{ + return 0; +} + +static int cmd_dropcaches(void) +{ + return error("drop caches not implemented on this platform"); +} + +#endif + +int cmd__drop_caches(int argc, const char **argv) +{ + cmd_sync(); + return cmd_dropcaches(); +} diff --git a/t/helper/test-dump-cache-tree.c b/t/helper/test-dump-cache-tree.c index ebf3aab22d..98a4891f1d 100644 --- a/t/helper/test-dump-cache-tree.c +++ b/t/helper/test-dump-cache-tree.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "tree.h" #include "cache-tree.h" @@ -54,7 +55,7 @@ static int dump_cache_tree(struct cache_tree *it, return errs; } -int cmd_main(int ac, const char **av) +int cmd__dump_cache_tree(int ac, const char **av) { struct index_state istate; struct cache_tree *another = cache_tree(); diff --git a/t/helper/test-dump-fsmonitor.c b/t/helper/test-dump-fsmonitor.c new file mode 100644 index 0000000000..ad452707e8 --- /dev/null +++ b/t/helper/test-dump-fsmonitor.c @@ -0,0 +1,21 @@ +#include "cache.h" + +int cmd_main(int ac, const char **av) +{ + struct index_state *istate = &the_index; + int i; + + setup_git_directory(); + if (do_read_index(istate, get_index_file(), 0) < 0) + die("unable to read index file"); + if (!istate->fsmonitor_last_update) { + printf("no fsmonitor\n"); + return 0; + } + printf("fsmonitor last update %"PRIuMAX"\n", (uintmax_t)istate->fsmonitor_last_update); + + for (i = 0; i < istate->cache_nr; i++) + printf((istate->cache[i]->ce_flags & CE_FSMONITOR_VALID) ? "+" : "-"); + + return 0; +} diff --git a/t/helper/test-dump-split-index.c b/t/helper/test-dump-split-index.c index e44430b699..4e2fdb5e30 100644 --- a/t/helper/test-dump-split-index.c +++ b/t/helper/test-dump-split-index.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "split-index.h" #include "ewah/ewok.h" @@ -7,7 +8,7 @@ static void show_bit(size_t pos, void *data) printf(" %d", (int)pos); } -int cmd_main(int ac, const char **av) +int cmd__dump_split_index(int ac, const char **av) { struct split_index *si; int i; diff --git a/t/helper/test-dump-untracked-cache.c b/t/helper/test-dump-untracked-cache.c index f752532ffb..d7c55c2355 100644 --- a/t/helper/test-dump-untracked-cache.c +++ b/t/helper/test-dump-untracked-cache.c @@ -54,8 +54,8 @@ int cmd_main(int ac, const char **av) printf("no untracked cache\n"); return 0; } - printf("info/exclude %s\n", sha1_to_hex(uc->ss_info_exclude.sha1)); - printf("core.excludesfile %s\n", sha1_to_hex(uc->ss_excludes_file.sha1)); + printf("info/exclude %s\n", oid_to_hex(&uc->ss_info_exclude.oid)); + printf("core.excludesfile %s\n", oid_to_hex(&uc->ss_excludes_file.oid)); printf("exclude_per_dir %s\n", uc->exclude_per_dir); printf("flags %08x\n", uc->dir_flags); if (uc->root) diff --git a/t/helper/test-example-decorate.c b/t/helper/test-example-decorate.c new file mode 100644 index 0000000000..081115bf8e --- /dev/null +++ b/t/helper/test-example-decorate.c @@ -0,0 +1,75 @@ +#include "test-tool.h" +#include "cache.h" +#include "object.h" +#include "decorate.h" + +int cmd__example_decorate(int argc, const char **argv) +{ + struct decoration n; + struct object_id one_oid = { {1} }; + struct object_id two_oid = { {2} }; + struct object_id three_oid = { {3} }; + struct object *one, *two, *three; + + int decoration_a, decoration_b; + + void *ret; + + int i, objects_noticed = 0; + + /* + * The struct must be zero-initialized. + */ + memset(&n, 0, sizeof(n)); + + /* + * Add 2 objects, one with a non-NULL decoration and one with a NULL + * decoration. + */ + one = lookup_unknown_object(one_oid.hash); + two = lookup_unknown_object(two_oid.hash); + ret = add_decoration(&n, one, &decoration_a); + if (ret) + die("BUG: when adding a brand-new object, NULL should be returned"); + ret = add_decoration(&n, two, NULL); + if (ret) + die("BUG: when adding a brand-new object, NULL should be returned"); + + /* + * When re-adding an already existing object, the old decoration is + * returned. + */ + ret = add_decoration(&n, one, NULL); + if (ret != &decoration_a) + die("BUG: when readding an already existing object, existing decoration should be returned"); + ret = add_decoration(&n, two, &decoration_b); + if (ret) + die("BUG: when readding an already existing object, existing decoration should be returned"); + + /* + * Lookup returns the added declarations, or NULL if the object was + * never added. + */ + ret = lookup_decoration(&n, one); + if (ret) + die("BUG: lookup should return added declaration"); + ret = lookup_decoration(&n, two); + if (ret != &decoration_b) + die("BUG: lookup should return added declaration"); + three = lookup_unknown_object(three_oid.hash); + ret = lookup_decoration(&n, three); + if (ret) + die("BUG: lookup for unknown object should return NULL"); + + /* + * The user can also loop through all entries. + */ + for (i = 0; i < n.size; i++) { + if (n.entries[i].base) + objects_noticed++; + } + if (objects_noticed != 2) + die("BUG: should have 2 objects"); + + return 0; +} diff --git a/t/helper/test-genrandom.c b/t/helper/test-genrandom.c index 8d11d22d98..99b8dc1e2d 100644 --- a/t/helper/test-genrandom.c +++ b/t/helper/test-genrandom.c @@ -4,9 +4,10 @@ * Copyright (C) 2007 by Nicolas Pitre, licensed under the GPL version 2. */ +#include "test-tool.h" #include "git-compat-util.h" -int cmd_main(int argc, const char **argv) +int cmd__genrandom(int argc, const char **argv) { unsigned long count, next = 0; unsigned char *c; diff --git a/t/helper/test-hashmap.c b/t/helper/test-hashmap.c index 095d7395f3..23d2b172fe 100644 --- a/t/helper/test-hashmap.c +++ b/t/helper/test-hashmap.c @@ -1,5 +1,7 @@ +#include "test-tool.h" #include "git-compat-util.h" #include "hashmap.h" +#include "strbuf.h" struct test_entry { @@ -13,27 +15,28 @@ static const char *get_value(const struct test_entry *e) return e->key + strlen(e->key) + 1; } -static int test_entry_cmp(const void *unused_cmp_data, - const struct test_entry *e1, - const struct test_entry *e2, - const char* key) +static int test_entry_cmp(const void *cmp_data, + const void *entry, + const void *entry_or_key, + const void *keydata) { - return strcmp(e1->key, key ? key : e2->key); + const int ignore_case = cmp_data ? *((int *)cmp_data) : 0; + const struct test_entry *e1 = entry; + const struct test_entry *e2 = entry_or_key; + const char *key = keydata; + + if (ignore_case) + return strcasecmp(e1->key, key ? key : e2->key); + else + return strcmp(e1->key, key ? key : e2->key); } -static int test_entry_cmp_icase(const void *unused_cmp_data, - const struct test_entry *e1, - const struct test_entry *e2, - const char* key) +static struct test_entry *alloc_test_entry(unsigned int hash, + char *key, char *value) { - return strcasecmp(e1->key, key ? key : e2->key); -} - -static struct test_entry *alloc_test_entry(int hash, char *key, int klen, - char *value, int vlen) -{ - struct test_entry *entry = malloc(sizeof(struct test_entry) + klen - + vlen + 2); + size_t klen = strlen(key); + size_t vlen = strlen(value); + struct test_entry *entry = xmalloc(st_add4(sizeof(*entry), klen, vlen, 2)); hashmap_entry_init(entry, hash); memcpy(entry->key, key, klen + 1); memcpy(entry->key + klen + 1, value, vlen + 1); @@ -75,7 +78,7 @@ static unsigned int hash(unsigned int method, unsigned int i, const char *key) /* * Test performance of hashmap.[ch] - * Usage: time echo "perfhashmap method rounds" | test-hashmap + * Usage: time echo "perfhashmap method rounds" | test-tool hashmap */ static void perf_hashmap(unsigned int method, unsigned int rounds) { @@ -85,19 +88,18 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) unsigned int *hashes; unsigned int i, j; - entries = malloc(TEST_SIZE * sizeof(struct test_entry *)); - hashes = malloc(TEST_SIZE * sizeof(int)); + ALLOC_ARRAY(entries, TEST_SIZE); + ALLOC_ARRAY(hashes, TEST_SIZE); for (i = 0; i < TEST_SIZE; i++) { - snprintf(buf, sizeof(buf), "%i", i); - entries[i] = alloc_test_entry(0, buf, strlen(buf), "", 0); + xsnprintf(buf, sizeof(buf), "%i", i); + entries[i] = alloc_test_entry(0, buf, ""); hashes[i] = hash(method, i, entries[i]->key); } if (method & TEST_ADD) { /* test adding to the map */ for (j = 0; j < rounds; j++) { - hashmap_init(&map, (hashmap_cmp_fn) test_entry_cmp, - NULL, 0); + hashmap_init(&map, test_entry_cmp, NULL, 0); /* add entries */ for (i = 0; i < TEST_SIZE; i++) { @@ -109,7 +111,7 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) } } else { /* test map lookups */ - hashmap_init(&map, (hashmap_cmp_fn) test_entry_cmp, NULL, 0); + hashmap_init(&map, test_entry_cmp, NULL, 0); /* fill the map (sparsely if specified) */ j = (method & TEST_SPARSE) ? TEST_SIZE / 10 : TEST_SIZE; @@ -143,56 +145,53 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) * * perfhashmap method rounds -> test hashmap.[ch] performance */ -int cmd_main(int argc, const char **argv) +int cmd__hashmap(int argc, const char **argv) { - char line[1024]; + struct strbuf line = STRBUF_INIT; struct hashmap map; int icase; /* init hash map */ icase = argc > 1 && !strcmp("ignorecase", argv[1]); - hashmap_init(&map, (hashmap_cmp_fn) (icase ? test_entry_cmp_icase - : test_entry_cmp), NULL, 0); + hashmap_init(&map, test_entry_cmp, &icase, 0); /* process commands from stdin */ - while (fgets(line, sizeof(line), stdin)) { + while (strbuf_getline(&line, stdin) != EOF) { char *cmd, *p1 = NULL, *p2 = NULL; - int l1 = 0, l2 = 0, hash = 0; + unsigned int hash = 0; struct test_entry *entry; /* break line into command and up to two parameters */ - cmd = strtok(line, DELIM); + cmd = strtok(line.buf, DELIM); /* ignore empty lines */ if (!cmd || *cmd == '#') continue; p1 = strtok(NULL, DELIM); if (p1) { - l1 = strlen(p1); hash = icase ? strihash(p1) : strhash(p1); p2 = strtok(NULL, DELIM); - if (p2) - l2 = strlen(p2); } - if (!strcmp("hash", cmd) && l1) { + if (!strcmp("hash", cmd) && p1) { /* print results of different hash functions */ - printf("%u %u %u %u\n", strhash(p1), memhash(p1, l1), - strihash(p1), memihash(p1, l1)); + printf("%u %u %u %u\n", + strhash(p1), memhash(p1, strlen(p1)), + strihash(p1), memihash(p1, strlen(p1))); - } else if (!strcmp("add", cmd) && l1 && l2) { + } else if (!strcmp("add", cmd) && p1 && p2) { /* create entry with key = p1, value = p2 */ - entry = alloc_test_entry(hash, p1, l1, p2, l2); + entry = alloc_test_entry(hash, p1, p2); /* add to hashmap */ hashmap_add(&map, entry); - } else if (!strcmp("put", cmd) && l1 && l2) { + } else if (!strcmp("put", cmd) && p1 && p2) { /* create entry with key = p1, value = p2 */ - entry = alloc_test_entry(hash, p1, l1, p2, l2); + entry = alloc_test_entry(hash, p1, p2); /* add / replace entry */ entry = hashmap_put(&map, entry); @@ -201,7 +200,7 @@ int cmd_main(int argc, const char **argv) puts(entry ? get_value(entry) : "NULL"); free(entry); - } else if (!strcmp("get", cmd) && l1) { + } else if (!strcmp("get", cmd) && p1) { /* lookup entry in hashmap */ entry = hashmap_get_from_hash(&map, hash, p1); @@ -214,7 +213,7 @@ int cmd_main(int argc, const char **argv) entry = hashmap_get_next(&map, entry); } - } else if (!strcmp("remove", cmd) && l1) { + } else if (!strcmp("remove", cmd) && p1) { /* setup static key */ struct hashmap_entry key; @@ -237,9 +236,10 @@ int cmd_main(int argc, const char **argv) } else if (!strcmp("size", cmd)) { /* print table sizes */ - printf("%u %u\n", map.tablesize, map.size); + printf("%u %u\n", map.tablesize, + hashmap_get_size(&map)); - } else if (!strcmp("intern", cmd) && l1) { + } else if (!strcmp("intern", cmd) && p1) { /* test that strintern works */ const char *i1 = strintern(p1); @@ -253,7 +253,7 @@ int cmd_main(int argc, const char **argv) else printf("%s\n", i1); - } else if (!strcmp("perfhashmap", cmd) && l1 && l2) { + } else if (!strcmp("perfhashmap", cmd) && p1 && p2) { perf_hashmap(atoi(p1), atoi(p2)); @@ -264,6 +264,7 @@ int cmd_main(int argc, const char **argv) } } + strbuf_release(&line); hashmap_free(&map, 1); return 0; } diff --git a/t/helper/test-index-version.c b/t/helper/test-index-version.c index f569f6b7ef..fcd10968cc 100644 --- a/t/helper/test-index-version.c +++ b/t/helper/test-index-version.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int argc, const char **argv) +int cmd__index_version(int argc, const char **argv) { struct cache_header hdr; int version; diff --git a/t/helper/test-lazy-init-name-hash.c b/t/helper/test-lazy-init-name-hash.c index 6368a89345..b99a37080d 100644 --- a/t/helper/test-lazy-init-name-hash.c +++ b/t/helper/test-lazy-init-name-hash.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "parse-options.h" @@ -112,7 +113,7 @@ static void analyze_run(void) { uint64_t t1s, t1m, t2s, t2m; int cache_nr_limit; - int nr_threads_used; + int nr_threads_used = 0; int i; int nr; @@ -184,14 +185,14 @@ static void analyze_run(void) } } -int cmd_main(int argc, const char **argv) +int cmd__lazy_init_name_hash(int argc, const char **argv) { const char *usage[] = { - "test-lazy-init-name-hash -d (-s | -m)", - "test-lazy-init-name-hash -p [-c c]", - "test-lazy-init-name-hash -a a [--step s] [-c c]", - "test-lazy-init-name-hash (-s | -m) [-c c]", - "test-lazy-init-name-hash -s -m [-c c]", + "test-tool lazy-init-name-hash -d (-s | -m)", + "test-tool lazy-init-name-hash -p [-c c]", + "test-tool lazy-init-name-hash -a a [--step s] [-c c]", + "test-tool lazy-init-name-hash (-s | -m) [-c c]", + "test-tool lazy-init-name-hash -s -m [-c c]", NULL }; struct option options[] = { diff --git a/t/helper/test-line-buffer.c b/t/helper/test-line-buffer.c index 81575fe2ab..078dd7e29d 100644 --- a/t/helper/test-line-buffer.c +++ b/t/helper/test-line-buffer.c @@ -17,27 +17,17 @@ static uint32_t strtouint32(const char *s) static void handle_command(const char *command, const char *arg, struct line_buffer *buf) { - switch (*command) { - case 'b': - if (starts_with(command, "binary ")) { - struct strbuf sb = STRBUF_INIT; - strbuf_addch(&sb, '>'); - buffer_read_binary(buf, &sb, strtouint32(arg)); - fwrite(sb.buf, 1, sb.len, stdout); - strbuf_release(&sb); - return; - } - case 'c': - if (starts_with(command, "copy ")) { - buffer_copy_bytes(buf, strtouint32(arg)); - return; - } - case 's': - if (starts_with(command, "skip ")) { - buffer_skip_bytes(buf, strtouint32(arg)); - return; - } - default: + if (starts_with(command, "binary ")) { + struct strbuf sb = STRBUF_INIT; + strbuf_addch(&sb, '>'); + buffer_read_binary(buf, &sb, strtouint32(arg)); + fwrite(sb.buf, 1, sb.len, stdout); + strbuf_release(&sb); + } else if (starts_with(command, "copy ")) { + buffer_copy_bytes(buf, strtouint32(arg)); + } else if (starts_with(command, "skip ")) { + buffer_skip_bytes(buf, strtouint32(arg)); + } else { die("unrecognized command: %s", command); } } diff --git a/t/helper/test-match-trees.c b/t/helper/test-match-trees.c index 356d8edef1..96857f26ac 100644 --- a/t/helper/test-match-trees.c +++ b/t/helper/test-match-trees.c @@ -1,7 +1,8 @@ +#include "test-tool.h" #include "cache.h" #include "tree.h" -int cmd_main(int ac, const char **av) +int cmd__match_trees(int ac, const char **av) { struct object_id hash1, hash2, shifted; struct tree *one, *two; diff --git a/t/helper/test-mergesort.c b/t/helper/test-mergesort.c index 335cf6b626..c5cffaa4b7 100644 --- a/t/helper/test-mergesort.c +++ b/t/helper/test-mergesort.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "mergesort.h" @@ -22,7 +23,7 @@ static int compare_strings(const void *a, const void *b) return strcmp(x->text, y->text); } -int cmd_main(int argc, const char **argv) +int cmd__mergesort(int argc, const char **argv) { struct line *line, *p = NULL, *lines = NULL; struct strbuf sb = STRBUF_INIT; diff --git a/t/helper/test-mktemp.c b/t/helper/test-mktemp.c index 89d9b2f7be..2290688940 100644 --- a/t/helper/test-mktemp.c +++ b/t/helper/test-mktemp.c @@ -1,9 +1,10 @@ /* * test-mktemp.c: code to exercise the creation of temporary files */ +#include "test-tool.h" #include "git-compat-util.h" -int cmd_main(int argc, const char **argv) +int cmd__mktemp(int argc, const char **argv) { if (argc != 2) usage("Expected 1 parameter defining the temporary file template"); diff --git a/t/helper/test-online-cpus.c b/t/helper/test-online-cpus.c index 06c09c6b88..8cb0d53840 100644 --- a/t/helper/test-online-cpus.c +++ b/t/helper/test-online-cpus.c @@ -1,7 +1,8 @@ +#include "test-tool.h" #include "git-compat-util.h" #include "thread-utils.h" -int cmd_main(int argc, const char **argv) +int cmd__online_cpus(int argc, const char **argv) { printf("%d\n", online_cpus()); return 0; diff --git a/t/helper/test-parse-options.c b/t/helper/test-parse-options.c index 75fe883aac..630c76d127 100644 --- a/t/helper/test-parse-options.c +++ b/t/helper/test-parse-options.c @@ -99,6 +99,8 @@ int cmd_main(int argc, const char **argv) const char *prefix = "prefix/"; const char *usage[] = { "test-parse-options <options>", + "", + "A helper function for the parse-options API.", NULL }; struct string_list expect = STRING_LIST_INIT_NODUP; diff --git a/t/helper/test-path-utils.c b/t/helper/test-path-utils.c index 2b3c5092a1..e115d44ac2 100644 --- a/t/helper/test-path-utils.c +++ b/t/helper/test-path-utils.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "string-list.h" @@ -170,7 +171,7 @@ static struct test_data dirname_data[] = { { NULL, NULL } }; -int cmd_main(int argc, const char **argv) +int cmd__path_utils(int argc, const char **argv) { if (argc == 3 && !strcmp(argv[1], "normalize_path_copy")) { char *buf = xmallocz(strlen(argv[2])); diff --git a/t/helper/test-pkt-line.c b/t/helper/test-pkt-line.c new file mode 100644 index 0000000000..0f19e53c75 --- /dev/null +++ b/t/helper/test-pkt-line.c @@ -0,0 +1,64 @@ +#include "pkt-line.h" + +static void pack_line(const char *line) +{ + if (!strcmp(line, "0000") || !strcmp(line, "0000\n")) + packet_flush(1); + else if (!strcmp(line, "0001") || !strcmp(line, "0001\n")) + packet_delim(1); + else + packet_write_fmt(1, "%s", line); +} + +static void pack(int argc, const char **argv) +{ + if (argc) { /* read from argv */ + int i; + for (i = 0; i < argc; i++) + pack_line(argv[i]); + } else { /* read from stdin */ + char line[LARGE_PACKET_MAX]; + while (fgets(line, sizeof(line), stdin)) { + pack_line(line); + } + } +} + +static void unpack(void) +{ + struct packet_reader reader; + packet_reader_init(&reader, 0, NULL, 0, + PACKET_READ_GENTLE_ON_EOF | + PACKET_READ_CHOMP_NEWLINE); + + while (packet_reader_read(&reader) != PACKET_READ_EOF) { + switch (reader.status) { + case PACKET_READ_EOF: + break; + case PACKET_READ_NORMAL: + printf("%s\n", reader.line); + break; + case PACKET_READ_FLUSH: + printf("0000\n"); + break; + case PACKET_READ_DELIM: + printf("0001\n"); + break; + } + } +} + +int cmd_main(int argc, const char **argv) +{ + if (argc < 2) + die("too few arguments"); + + if (!strcmp(argv[1], "pack")) + pack(argc - 2, argv + 2); + else if (!strcmp(argv[1], "unpack")) + unpack(); + else + die("invalid argument '%s'", argv[1]); + + return 0; +} diff --git a/t/helper/test-prio-queue.c b/t/helper/test-prio-queue.c index ae58fff359..9807b649b1 100644 --- a/t/helper/test-prio-queue.c +++ b/t/helper/test-prio-queue.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "prio-queue.h" @@ -16,7 +17,7 @@ static void show(int *v) free(v); } -int cmd_main(int argc, const char **argv) +int cmd__prio_queue(int argc, const char **argv) { struct prio_queue pq = { intcmp }; diff --git a/t/helper/test-read-cache.c b/t/helper/test-read-cache.c index 48255eef31..d674c88ba0 100644 --- a/t/helper/test-read-cache.c +++ b/t/helper/test-read-cache.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int argc, const char **argv) +int cmd__read_cache(int argc, const char **argv) { int i, cnt = 1; if (argc == 2) diff --git a/t/helper/test-ref-store.c b/t/helper/test-ref-store.c index 05d8c4d8af..e9e0541276 100644 --- a/t/helper/test-ref-store.c +++ b/t/helper/test-ref-store.c @@ -1,6 +1,9 @@ +#include "test-tool.h" #include "cache.h" #include "refs.h" #include "worktree.h" +#include "object-store.h" +#include "repository.h" static const char *notnull(const char *arg, const char *name) { @@ -21,7 +24,7 @@ static const char **get_store(const char **argv, struct ref_store **refs) if (!argv[0]) { die("ref store required"); } else if (!strcmp(argv[0], "main")) { - *refs = get_main_ref_store(); + *refs = get_main_ref_store(the_repository); } else if (skip_prefix(argv[0], "submodule:", &gitdir)) { struct strbuf sb = STRBUF_INIT; int ret; @@ -72,12 +75,12 @@ static int cmd_pack_refs(struct ref_store *refs, const char **argv) static int cmd_peel_ref(struct ref_store *refs, const char **argv) { const char *refname = notnull(*argv++, "refname"); - unsigned char sha1[20]; + struct object_id oid; int ret; - ret = refs_peel_ref(refs, refname, sha1); + ret = refs_peel_ref(refs, refname, &oid); if (!ret) - puts(sha1_to_hex(sha1)); + puts(oid_to_hex(&oid)); return ret; } @@ -127,15 +130,15 @@ static int cmd_for_each_ref(struct ref_store *refs, const char **argv) static int cmd_resolve_ref(struct ref_store *refs, const char **argv) { - unsigned char sha1[20]; + struct object_id oid; const char *refname = notnull(*argv++, "refname"); int resolve_flags = arg_flags(*argv++, "resolve-flags"); int flags; const char *ref; ref = refs_resolve_ref_unsafe(refs, refname, resolve_flags, - sha1, &flags); - printf("%s %s 0x%x\n", sha1_to_hex(sha1), ref, flags); + &oid, &flags); + printf("%s %s 0x%x\n", oid_to_hex(&oid), ref ? ref : "(null)", flags); return ref ? 0 : 1; } @@ -218,12 +221,12 @@ static int cmd_delete_ref(struct ref_store *refs, const char **argv) const char *refname = notnull(*argv++, "refname"); const char *sha1_buf = notnull(*argv++, "old-sha1"); unsigned int flags = arg_flags(*argv++, "flags"); - unsigned char old_sha1[20]; + struct object_id old_oid; - if (get_sha1_hex(sha1_buf, old_sha1)) + if (get_oid_hex(sha1_buf, &old_oid)) die("not sha-1"); - return refs_delete_ref(refs, msg, refname, old_sha1, flags); + return refs_delete_ref(refs, msg, refname, &old_oid, flags); } static int cmd_update_ref(struct ref_store *refs, const char **argv) @@ -233,15 +236,15 @@ static int cmd_update_ref(struct ref_store *refs, const char **argv) const char *new_sha1_buf = notnull(*argv++, "old-sha1"); const char *old_sha1_buf = notnull(*argv++, "old-sha1"); unsigned int flags = arg_flags(*argv++, "flags"); - unsigned char old_sha1[20]; - unsigned char new_sha1[20]; + struct object_id old_oid; + struct object_id new_oid; - if (get_sha1_hex(old_sha1_buf, old_sha1) || - get_sha1_hex(new_sha1_buf, new_sha1)) + if (get_oid_hex(old_sha1_buf, &old_oid) || + get_oid_hex(new_sha1_buf, &new_oid)) die("not sha-1"); return refs_update_ref(refs, msg, refname, - new_sha1, old_sha1, + &new_oid, &old_oid, flags, UPDATE_REFS_DIE_ON_ERR); } @@ -274,7 +277,7 @@ static struct command commands[] = { { NULL, NULL } }; -int cmd_main(int argc, const char **argv) +int cmd__ref_store(int argc, const char **argv) { struct ref_store *refs; const char *func; diff --git a/t/helper/test-regex.c b/t/helper/test-regex.c index b5ea8a97c5..10284cc56f 100644 --- a/t/helper/test-regex.c +++ b/t/helper/test-regex.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "git-compat-util.h" #include "gettext.h" @@ -36,7 +37,7 @@ static int test_regex_bug(void) return 0; } -int cmd_main(int argc, const char **argv) +int cmd__regex(int argc, const char **argv) { const char *pat; const char *str; @@ -47,8 +48,8 @@ int cmd_main(int argc, const char **argv) if (argc == 2 && !strcmp(argv[1], "--bug")) return test_regex_bug(); else if (argc < 3) - usage("test-regex --bug\n" - "test-regex <pattern> <string> [<options>]"); + usage("test-tool regex --bug\n" + "test-tool regex <pattern> <string> [<options>]"); argv++; pat = *argv++; diff --git a/t/helper/test-revision-walking.c b/t/helper/test-revision-walking.c index b8e6fe1d00..4f8bc75821 100644 --- a/t/helper/test-revision-walking.c +++ b/t/helper/test-revision-walking.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include "test-tool.h" #include "cache.h" #include "commit.h" #include "diff.h" @@ -45,7 +46,7 @@ static int run_revision_walk(void) return got_revision; } -int cmd_main(int argc, const char **argv) +int cmd__revision_walking(int argc, const char **argv) { if (argc < 2) return 1; diff --git a/t/helper/test-run-command.c b/t/helper/test-run-command.c index d24d157379..2cc93bb69c 100644 --- a/t/helper/test-run-command.c +++ b/t/helper/test-run-command.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include "test-tool.h" #include "git-compat-util.h" #include "run-command.h" #include "argv-array.h" @@ -49,13 +50,22 @@ static int task_finished(int result, return 1; } -int cmd_main(int argc, const char **argv) +int cmd__run_command(int argc, const char **argv) { struct child_process proc = CHILD_PROCESS_INIT; int jobs; if (argc < 3) return 1; + while (!strcmp(argv[1], "env")) { + if (!argv[2]) + die("env specifier without a value"); + argv_array_push(&proc.env_array, argv[2]); + argv += 2; + argc -= 2; + } + if (argc < 3) + return 1; proc.argv = (const char **)argv + 2; if (!strcmp(argv[1], "start-command-ENOENT")) { diff --git a/t/helper/test-scrap-cache-tree.c b/t/helper/test-scrap-cache-tree.c index d2a63bea43..d26d3e7c8b 100644 --- a/t/helper/test-scrap-cache-tree.c +++ b/t/helper/test-scrap-cache-tree.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "lockfile.h" #include "tree.h" @@ -5,7 +6,7 @@ static struct lock_file index_lock; -int cmd_main(int ac, const char **av) +int cmd__scrap_cache_tree(int ac, const char **av) { setup_git_directory(); hold_locked_index(&index_lock, LOCK_DIE_ON_ERROR); diff --git a/t/helper/test-sha1-array.c b/t/helper/test-sha1-array.c index edfd52d82a..ad5e69f9d3 100644 --- a/t/helper/test-sha1-array.c +++ b/t/helper/test-sha1-array.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "sha1-array.h" @@ -7,7 +8,7 @@ static int print_oid(const struct object_id *oid, void *data) return 0; } -int cmd_main(int argc, const char **argv) +int cmd__sha1_array(int argc, const char **argv) { struct oid_array array = OID_ARRAY_INIT; struct strbuf line = STRBUF_INIT; diff --git a/t/helper/test-sha1.c b/t/helper/test-sha1.c index a1c13f54ec..1ba0675c75 100644 --- a/t/helper/test-sha1.c +++ b/t/helper/test-sha1.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int ac, const char **av) +int cmd__sha1(int ac, const char **av) { git_SHA_CTX ctx; unsigned char sha1[20]; diff --git a/t/helper/test-sha1.sh b/t/helper/test-sha1.sh index 750b95a0a1..84594885c7 100755 --- a/t/helper/test-sha1.sh +++ b/t/helper/test-sha1.sh @@ -1,7 +1,7 @@ #!/bin/sh dd if=/dev/zero bs=1048576 count=100 2>/dev/null | -/usr/bin/time t/helper/test-sha1 >/dev/null +/usr/bin/time t/helper/test-tool sha1 >/dev/null while read expect cnt pfx do @@ -11,7 +11,7 @@ do test -z "$pfx" || echo "$pfx" dd if=/dev/zero bs=1048576 count=$cnt 2>/dev/null | perl -pe 'y/\000/g/' - } | ./t/helper/test-sha1 $cnt + } | ./t/helper/test-tool sha1 $cnt ) if test "$expect" = "$actual" then diff --git a/t/helper/test-sigchain.c b/t/helper/test-sigchain.c index b71edbd442..77ac5bc33f 100644 --- a/t/helper/test-sigchain.c +++ b/t/helper/test-sigchain.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "sigchain.h" @@ -13,7 +14,7 @@ X(two) X(three) #undef X -int cmd_main(int argc, const char **argv) { +int cmd__sigchain(int argc, const char **argv) { sigchain_push(SIGTERM, one); sigchain_push(SIGTERM, two); sigchain_push(SIGTERM, three); diff --git a/t/helper/test-strcmp-offset.c b/t/helper/test-strcmp-offset.c index e159c9a127..44e4a6d143 100644 --- a/t/helper/test-strcmp-offset.c +++ b/t/helper/test-strcmp-offset.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int argc, const char **argv) +int cmd__strcmp_offset(int argc, const char **argv) { int result; size_t offset; diff --git a/t/helper/test-string-list.c b/t/helper/test-string-list.c index 829ec3d7d2..2123dda85b 100644 --- a/t/helper/test-string-list.c +++ b/t/helper/test-string-list.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "string-list.h" @@ -41,7 +42,7 @@ static int prefix_cb(struct string_list_item *item, void *cb_data) return starts_with(item->string, prefix); } -int cmd_main(int argc, const char **argv) +int cmd__string_list(int argc, const char **argv) { if (argc == 5 && !strcmp(argv[1], "split")) { struct string_list list = STRING_LIST_INIT_DUP; diff --git a/t/helper/test-submodule-config.c b/t/helper/test-submodule-config.c index c6c57bba0d..e2692746df 100644 --- a/t/helper/test-submodule-config.c +++ b/t/helper/test-submodule-config.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "config.h" #include "submodule-config.h" @@ -10,12 +11,7 @@ static void die_usage(int argc, const char **argv, const char *msg) exit(1); } -static int git_test_config(const char *var, const char *value, void *cb) -{ - return parse_submodule_config_option(var, value); -} - -int cmd_main(int argc, const char **argv) +int cmd__submodule_config(int argc, const char **argv) { const char **arg = argv; int my_argc = argc; @@ -37,11 +33,9 @@ int cmd_main(int argc, const char **argv) die_usage(argc, argv, "Wrong number of arguments."); setup_git_directory(); - gitmodules_config(); - git_config(git_test_config, NULL); while (*arg) { - unsigned char commit_sha1[20]; + struct object_id commit_oid; const struct submodule *submodule; const char *commit; const char *path_or_name; @@ -50,14 +44,16 @@ int cmd_main(int argc, const char **argv) path_or_name = arg[1]; if (commit[0] == '\0') - hashclr(commit_sha1); - else if (get_sha1(commit, commit_sha1) < 0) + oidclr(&commit_oid); + else if (get_oid(commit, &commit_oid) < 0) die_usage(argc, argv, "Commit not found."); if (lookup_name) { - submodule = submodule_from_name(commit_sha1, path_or_name); + submodule = submodule_from_name(the_repository, + &commit_oid, path_or_name); } else - submodule = submodule_from_path(commit_sha1, path_or_name); + submodule = submodule_from_path(the_repository, + &commit_oid, path_or_name); if (!submodule) die_usage(argc, argv, "Submodule not found."); @@ -71,7 +67,7 @@ int cmd_main(int argc, const char **argv) arg += 2; } - submodule_free(); + submodule_free(the_repository); return 0; } diff --git a/t/helper/test-subprocess.c b/t/helper/test-subprocess.c index 30c5765bfc..92b69de635 100644 --- a/t/helper/test-subprocess.c +++ b/t/helper/test-subprocess.c @@ -1,7 +1,8 @@ +#include "test-tool.h" #include "cache.h" #include "run-command.h" -int cmd_main(int argc, const char **argv) +int cmd__subprocess(int argc, const char **argv) { struct child_process cp = CHILD_PROCESS_INIT; int nogit = 0; diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c new file mode 100644 index 0000000000..87066ced62 --- /dev/null +++ b/t/helper/test-tool.c @@ -0,0 +1,62 @@ +#include "git-compat-util.h" +#include "test-tool.h" + +struct test_cmd { + const char *name; + int (*fn)(int argc, const char **argv); +}; + +static struct test_cmd cmds[] = { + { "chmtime", cmd__chmtime }, + { "config", cmd__config }, + { "ctype", cmd__ctype }, + { "date", cmd__date }, + { "delta", cmd__delta }, + { "drop-caches", cmd__drop_caches }, + { "dump-cache-tree", cmd__dump_cache_tree }, + { "dump-split-index", cmd__dump_split_index }, + { "example-decorate", cmd__example_decorate }, + { "genrandom", cmd__genrandom }, + { "hashmap", cmd__hashmap }, + { "index-version", cmd__index_version }, + { "lazy-init-name-hash", cmd__lazy_init_name_hash }, + { "match-trees", cmd__match_trees }, + { "mergesort", cmd__mergesort }, + { "mktemp", cmd__mktemp }, + { "online-cpus", cmd__online_cpus }, + { "path-utils", cmd__path_utils }, + { "prio-queue", cmd__prio_queue }, + { "read-cache", cmd__read_cache }, + { "ref-store", cmd__ref_store }, + { "regex", cmd__regex }, + { "revision-walking", cmd__revision_walking }, + { "run-command", cmd__run_command }, + { "scrap-cache-tree", cmd__scrap_cache_tree }, + { "sha1-array", cmd__sha1_array }, + { "sha1", cmd__sha1 }, + { "sigchain", cmd__sigchain }, + { "strcmp-offset", cmd__strcmp_offset }, + { "string-list", cmd__string_list }, + { "submodule-config", cmd__submodule_config }, + { "subprocess", cmd__subprocess }, + { "urlmatch-normalization", cmd__urlmatch_normalization }, + { "wildmatch", cmd__wildmatch }, + { "write-cache", cmd__write_cache }, +}; + +int cmd_main(int argc, const char **argv) +{ + int i; + + if (argc < 2) + die("I need a test name!"); + + for (i = 0; i < ARRAY_SIZE(cmds); i++) { + if (!strcmp(cmds[i].name, argv[1])) { + argv++; + argc--; + return cmds[i].fn(argc, argv); + } + } + die("There is no test named '%s'", argv[1]); +} diff --git a/t/helper/test-tool.h b/t/helper/test-tool.h new file mode 100644 index 0000000000..7116ddfb94 --- /dev/null +++ b/t/helper/test-tool.h @@ -0,0 +1,40 @@ +#ifndef __TEST_TOOL_H__ +#define __TEST_TOOL_H__ + +int cmd__chmtime(int argc, const char **argv); +int cmd__config(int argc, const char **argv); +int cmd__ctype(int argc, const char **argv); +int cmd__date(int argc, const char **argv); +int cmd__delta(int argc, const char **argv); +int cmd__drop_caches(int argc, const char **argv); +int cmd__dump_cache_tree(int argc, const char **argv); +int cmd__dump_split_index(int argc, const char **argv); +int cmd__example_decorate(int argc, const char **argv); +int cmd__genrandom(int argc, const char **argv); +int cmd__hashmap(int argc, const char **argv); +int cmd__index_version(int argc, const char **argv); +int cmd__lazy_init_name_hash(int argc, const char **argv); +int cmd__match_trees(int argc, const char **argv); +int cmd__mergesort(int argc, const char **argv); +int cmd__mktemp(int argc, const char **argv); +int cmd__online_cpus(int argc, const char **argv); +int cmd__path_utils(int argc, const char **argv); +int cmd__prio_queue(int argc, const char **argv); +int cmd__read_cache(int argc, const char **argv); +int cmd__ref_store(int argc, const char **argv); +int cmd__regex(int argc, const char **argv); +int cmd__revision_walking(int argc, const char **argv); +int cmd__run_command(int argc, const char **argv); +int cmd__scrap_cache_tree(int argc, const char **argv); +int cmd__sha1_array(int argc, const char **argv); +int cmd__sha1(int argc, const char **argv); +int cmd__sigchain(int argc, const char **argv); +int cmd__strcmp_offset(int argc, const char **argv); +int cmd__string_list(int argc, const char **argv); +int cmd__submodule_config(int argc, const char **argv); +int cmd__subprocess(int argc, const char **argv); +int cmd__urlmatch_normalization(int argc, const char **argv); +int cmd__wildmatch(int argc, const char **argv); +int cmd__write_cache(int argc, const char **argv); + +#endif diff --git a/t/helper/test-urlmatch-normalization.c b/t/helper/test-urlmatch-normalization.c index 49b6e836be..8f4d67e646 100644 --- a/t/helper/test-urlmatch-normalization.c +++ b/t/helper/test-urlmatch-normalization.c @@ -1,9 +1,10 @@ +#include "test-tool.h" #include "git-compat-util.h" #include "urlmatch.h" -int cmd_main(int argc, const char **argv) +int cmd__urlmatch_normalization(int argc, const char **argv) { - const char usage[] = "test-urlmatch-normalization [-p | -l] <url1> | <url1> <url2>"; + const char usage[] = "test-tool urlmatch-normalization [-p | -l] <url1> | <url1> <url2>"; char *url1, *url2; int opt_p = 0, opt_l = 0; diff --git a/t/helper/test-wildmatch.c b/t/helper/test-wildmatch.c index 921d7b3e7e..2c103d1824 100644 --- a/t/helper/test-wildmatch.c +++ b/t/helper/test-wildmatch.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int argc, const char **argv) +int cmd__wildmatch(int argc, const char **argv) { int i; for (i = 2; i < argc; i++) { @@ -16,6 +17,8 @@ int cmd_main(int argc, const char **argv) return !!wildmatch(argv[3], argv[2], WM_PATHNAME | WM_CASEFOLD); else if (!strcmp(argv[1], "pathmatch")) return !!wildmatch(argv[3], argv[2], 0); + else if (!strcmp(argv[1], "ipathmatch")) + return !!wildmatch(argv[3], argv[2], WM_CASEFOLD); else return 1; } diff --git a/t/helper/test-write-cache.c b/t/helper/test-write-cache.c new file mode 100644 index 0000000000..017dc30380 --- /dev/null +++ b/t/helper/test-write-cache.c @@ -0,0 +1,24 @@ +#include "test-tool.h" +#include "cache.h" +#include "lockfile.h" + +static struct lock_file index_lock; + +int cmd__write_cache(int argc, const char **argv) +{ + int i, cnt = 1, lockfd; + if (argc == 2) + cnt = strtol(argv[1], NULL, 0); + setup_git_directory(); + read_cache(); + for (i = 0; i < cnt; i++) { + lockfd = hold_locked_index(&index_lock, LOCK_DIE_ON_ERROR); + if (0 <= lockfd) { + write_locked_index(&the_index, &index_lock, COMMIT_LOCK); + } else { + rollback_lock_file(&index_lock); + } + } + + return 0; +} diff --git a/t/interop/i5700-protocol-transition.sh b/t/interop/i5700-protocol-transition.sh new file mode 100755 index 0000000000..97e8e580ef --- /dev/null +++ b/t/interop/i5700-protocol-transition.sh @@ -0,0 +1,68 @@ +#!/bin/sh + +VERSION_A=. +VERSION_B=v2.0.0 + +: ${LIB_GIT_DAEMON_PORT:=5700} +LIB_GIT_DAEMON_COMMAND='git.b daemon' + +test_description='clone and fetch by client who is trying to use a new protocol' +. ./interop-lib.sh +. "$TEST_DIRECTORY"/lib-git-daemon.sh + +start_git_daemon --export-all + +repo=$GIT_DAEMON_DOCUMENT_ROOT_PATH/repo + +test_expect_success "create repo served by $VERSION_B" ' + git.b init "$repo" && + git.b -C "$repo" commit --allow-empty -m one +' + +test_expect_success "git:// clone with $VERSION_A and protocol v1" ' + GIT_TRACE_PACKET=1 git.a -c protocol.version=1 clone "$GIT_DAEMON_URL/repo" child 2>log && + git.a -C child log -1 --format=%s >actual && + git.b -C "$repo" log -1 --format=%s >expect && + test_cmp expect actual && + grep "version=1" log +' + +test_expect_success "git:// fetch with $VERSION_A and protocol v1" ' + git.b -C "$repo" commit --allow-empty -m two && + git.b -C "$repo" log -1 --format=%s >expect && + + GIT_TRACE_PACKET=1 git.a -C child -c protocol.version=1 fetch 2>log && + git.a -C child log -1 --format=%s FETCH_HEAD >actual && + + test_cmp expect actual && + grep "version=1" log && + ! grep "version 1" log +' + +stop_git_daemon + +test_expect_success "create repo served by $VERSION_B" ' + git.b init parent && + git.b -C parent commit --allow-empty -m one +' + +test_expect_success "file:// clone with $VERSION_A and protocol v1" ' + GIT_TRACE_PACKET=1 git.a -c protocol.version=1 clone --upload-pack="git.b upload-pack" parent child2 2>log && + git.a -C child2 log -1 --format=%s >actual && + git.b -C parent log -1 --format=%s >expect && + test_cmp expect actual && + ! grep "version 1" log +' + +test_expect_success "file:// fetch with $VERSION_A and protocol v1" ' + git.b -C parent commit --allow-empty -m two && + git.b -C parent log -1 --format=%s >expect && + + GIT_TRACE_PACKET=1 git.a -C child2 -c protocol.version=1 fetch --upload-pack="git.b upload-pack" 2>log && + git.a -C child2 log -1 --format=%s FETCH_HEAD >actual && + + test_cmp expect actual && + ! grep "version 1" log +' + +test_done diff --git a/t/lib-credential.sh b/t/lib-credential.sh index d8e41f7ddd..937b831ea6 100755 --- a/t/lib-credential.sh +++ b/t/lib-credential.sh @@ -44,6 +44,7 @@ helper_test_clean() { reject $1 https example.com user2 reject $1 http path.tld user reject $1 https timeout.tld user + reject $1 https sso.tld } reject() { @@ -250,6 +251,24 @@ helper_test() { password=pass2 EOF ' + + test_expect_success "helper ($HELPER) can store empty username" ' + check approve $HELPER <<-\EOF && + protocol=https + host=sso.tld + username= + password= + EOF + check fill $HELPER <<-\EOF + protocol=https + host=sso.tld + -- + protocol=https + host=sso.tld + username= + password= + EOF + ' } helper_test_timeout() { diff --git a/t/lib-git-daemon.sh b/t/lib-git-daemon.sh index 987d40680b..edbea2d986 100644 --- a/t/lib-git-daemon.sh +++ b/t/lib-git-daemon.sh @@ -32,7 +32,8 @@ LIB_GIT_DAEMON_PORT=${LIB_GIT_DAEMON_PORT-${this_test#t}} GIT_DAEMON_PID= GIT_DAEMON_DOCUMENT_ROOT_PATH="$PWD"/repo -GIT_DAEMON_URL=git://127.0.0.1:$LIB_GIT_DAEMON_PORT +GIT_DAEMON_HOST_PORT=127.0.0.1:$LIB_GIT_DAEMON_PORT +GIT_DAEMON_URL=git://$GIT_DAEMON_HOST_PORT start_git_daemon() { if test -n "$GIT_DAEMON_PID" @@ -53,11 +54,19 @@ start_git_daemon() { "$@" "$GIT_DAEMON_DOCUMENT_ROOT_PATH" \ >&3 2>git_daemon_output & GIT_DAEMON_PID=$! + >daemon.log { - read line <&7 - echo >&4 "$line" - cat <&7 >&4 & - } 7<git_daemon_output && + read -r line <&7 + printf "%s\n" "$line" + printf >&4 "%s\n" "$line" + ( + while read -r line <&7 + do + printf "%s\n" "$line" + printf >&4 "%s\n" "$line" + done + ) & + } 7<git_daemon_output >>"$TRASH_DIRECTORY/daemon.log" && # Check expected output if test x"$(expr "$line" : "\[[0-9]*\] \(.*\)")" != x"Ready to rumble" @@ -90,3 +99,25 @@ stop_git_daemon() { GIT_DAEMON_PID= rm -f git_daemon_output } + +# A stripped-down version of a netcat client, that connects to a "host:port" +# given in $1, sends its stdin followed by EOF, then dumps the response (until +# EOF) to stdout. +fake_nc() { + if ! test_declared_prereq FAKENC + then + echo >&4 "fake_nc: need to declare FAKENC prerequisite" + return 127 + fi + perl -Mstrict -MIO::Socket::INET -e ' + my $s = IO::Socket::INET->new(shift) + or die "unable to open socket: $!"; + print $s <STDIN>; + $s->shutdown(1); + print <$s>; + ' "$@" +} + +test_lazy_prereq FAKENC ' + perl -MIO::Socket::INET -e "exit 0" +' diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh index 54fd5a6ca0..c27599474c 100644 --- a/t/lib-git-p4.sh +++ b/t/lib-git-p4.sh @@ -39,7 +39,7 @@ native_path () { then path=$(cygpath --windows "$path") else - path=$(test-path-utils real_path "$path") + path=$(test-tool path-utils real_path "$path") fi && echo "$path" } diff --git a/t/lib-git-svn.sh b/t/lib-git-svn.sh index 688313ed5c..a8130f9119 100644 --- a/t/lib-git-svn.sh +++ b/t/lib-git-svn.sh @@ -17,8 +17,8 @@ SVN_TREE=$GIT_SVN_DIR/svn-tree svn >/dev/null 2>&1 if test $? -ne 1 then - skip_all='skipping git svn tests, svn not found' - test_done + skip_all='skipping git svn tests, svn not found' + test_done fi svnrepo=$PWD/svnrepo @@ -49,7 +49,7 @@ rawsvnrepo="$svnrepo" svnrepo="file://$svnrepo" poke() { - test-chmtime +1 "$1" + test-tool chmtime +1 "$1" } # We need this, because we should pass empty configuration directory to @@ -110,18 +110,20 @@ EOF } require_svnserve () { - if test -z "$SVNSERVE_PORT" - then - skip_all='skipping svnserve test. (set $SVNSERVE_PORT to enable)' - test_done - fi + test_tristate GIT_TEST_SVNSERVE + if ! test "$GIT_TEST_SVNSERVE" = true + then + skip_all='skipping svnserve test. (set $GIT_TEST_SVNSERVE to enable)' + test_done + fi } start_svnserve () { - svnserve --listen-port $SVNSERVE_PORT \ - --root "$rawsvnrepo" \ - --listen-once \ - --listen-host 127.0.0.1 & + SVNSERVE_PORT=${SVNSERVE_PORT-${this_test#t}} + svnserve --listen-port $SVNSERVE_PORT \ + --root "$rawsvnrepo" \ + --listen-once \ + --listen-host 127.0.0.1 & } prepare_a_utf8_locale () { diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index 43679a4c64..a5d3b2cbaa 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -31,7 +31,7 @@ then chmod 0700 ./gpghome && GNUPGHOME="$(pwd)/gpghome" && export GNUPGHOME && - (gpgconf --kill gpg-agent 2>&1 >/dev/null || : ) && + (gpgconf --kill gpg-agent >/dev/null 2>&1 || : ) && gpg --homedir "${GNUPGHOME}" 2>/dev/null --import \ "$TEST_DIRECTORY"/lib-gpg/keyring.gpg && gpg --homedir "${GNUPGHOME}" 2>/dev/null --import-ownertrust \ diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 0642ae7e6e..724d9ae462 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -25,6 +25,9 @@ ErrorLog error.log <IfModule !mod_headers.c> LoadModule headers_module modules/mod_headers.so </IfModule> +<IfModule !mod_setenvif.c> + LoadModule setenvif_module modules/mod_setenvif.so +</IfModule> <IfVersion < 2.4> LockFile accept.lock @@ -76,6 +79,8 @@ PassEnv ASAN_OPTIONS PassEnv GIT_TRACE PassEnv GIT_CONFIG_NOSYSTEM +SetEnvIf Git-Protocol ".*" GIT_PROTOCOL=$0 + Alias /dumb/ www/ Alias /auth/dumb/ www/auth/dumb/ diff --git a/t/lib-pack.sh b/t/lib-pack.sh index 7509846571..501078249d 100644 --- a/t/lib-pack.sh +++ b/t/lib-pack.sh @@ -85,7 +85,7 @@ pack_obj () { # Compute and append pack trailer to "$1" pack_trailer () { - test-sha1 -b <"$1" >trailer.tmp && + test-tool sha1 -b <"$1" >trailer.tmp && cat trailer.tmp >>"$1" && rm -f trailer.tmp } diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index 2d26f86800..1f38a85371 100755 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -306,9 +306,9 @@ test_submodule_content () { # to protect the history! # -# Test that submodule contents are currently not updated when switching -# between commits that change a submodule. -test_submodule_switch () { +# Internal function; use test_submodule_switch() or +# test_submodule_forced_switch() instead. +test_submodule_switch_common() { command="$1" ######################### Appearing submodule ######################### # Switching to a commit letting a submodule appear creates empty dir ... @@ -332,7 +332,7 @@ test_submodule_switch () { test_submodule_content sub1 origin/add_sub1 ) ' - # ... and doesn't care if it already exists ... + # ... and doesn't care if it already exists. test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" ' prolog && reset_work_tree_to no_submodule && @@ -347,19 +347,6 @@ test_submodule_switch () { test_submodule_content sub1 origin/add_sub1 ) ' - # ... unless there is an untracked file in its place. - test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" ' - prolog && - reset_work_tree_to no_submodule && - ( - cd submodule_update && - git branch -t add_sub1 origin/add_sub1 && - >sub1 && - test_must_fail $command add_sub1 && - test_superproject_content origin/no_submodule && - test_must_be_empty sub1 - ) - ' # Replacing a tracked file with a submodule produces an empty # directory ... test_expect_$RESULT "$command: replace tracked file with submodule creates empty directory" ' @@ -441,6 +428,11 @@ test_submodule_switch () { # submodule files with the newly checked out ones in the # directory of the same name while it shouldn't. RESULT="failure" + elif test "$KNOWN_FAILURE_FORCED_SWITCH_TESTS" = 1 + then + # All existing tests that use test_submodule_forced_switch() + # require this. + RESULT="failure" else RESULT="success" fi @@ -522,7 +514,6 @@ test_submodule_switch () { test_submodule_content sub1 origin/modify_sub1 ) ' - # Updating a submodule to an invalid sha1 doesn't update the # submodule's work tree, subsequent update will fail test_expect_$RESULT "$command: modified submodule does not update submodule work tree to invalid commit" ' @@ -555,235 +546,269 @@ test_submodule_switch () { ' } -# Test that submodule contents are currently not updated when switching -# between commits that change a submodule, but throwing away local changes in +# Declares and invokes several tests that, in various situations, checks that +# the provided transition function: +# - succeeds in updating the worktree and index of a superproject to a target +# commit, or fails atomically (depending on the test situation) +# - if succeeds, the contents of submodule directories are unchanged +# - if succeeds, once "git submodule update" is invoked, the contents of +# submodule directories are updated +# +# If the command under test is known to not work with submodules in certain +# conditions, set the appropriate KNOWN_FAILURE_* variable used in the tests +# below to 1. +# +# Use as follows: +# +# my_func () { +# target=$1 +# # Do something here that updates the worktree and index to match target, +# # but not any submodule directories. +# } +# test_submodule_switch "my_func" +test_submodule_switch () { + command="$1" + test_submodule_switch_common "$command" + + # An empty directory does not prevent the creation of a submodule of + # the same name, but a file does. + test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + >sub1 && + test_must_fail $command add_sub1 && + test_superproject_content origin/no_submodule && + test_must_be_empty sub1 + ) + ' +} + +# Same as test_submodule_switch(), except that throwing away local changes in # the superproject is allowed. test_submodule_forced_switch () { command="$1" - ######################### Appearing submodule ######################### - # Switching to a commit letting a submodule appear creates empty dir ... - test_expect_success "$command: added submodule creates empty directory" ' + KNOWN_FAILURE_FORCED_SWITCH_TESTS=1 + test_submodule_switch_common "$command" + + # When forced, a file in the superproject does not prevent creating a + # submodule of the same name. + test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" ' prolog && reset_work_tree_to no_submodule && ( cd submodule_update && git branch -t add_sub1 origin/add_sub1 && + >sub1 && $command add_sub1 && test_superproject_content origin/add_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && - test_submodule_content sub1 origin/add_sub1 + test_dir_is_empty sub1 ) ' - # ... and doesn't care if it already exists ... - test_expect_success "$command: added submodule leaves existing empty directory alone" ' +} + +# Test that submodule contents are correctly updated when switching +# between commits that change a submodule. +# Test that the following transitions are correctly handled: +# (These tests are also above in the case where we expect no change +# in the submodule) +# - Updated submodule +# - New submodule +# - Removed submodule +# - Directory containing tracked files replaced by submodule +# - Submodule replaced by tracked files in directory +# - Submodule replaced by tracked file with the same name +# - tracked file replaced by submodule +# +# New test cases +# - Removing a submodule with a git directory absorbs the submodules +# git directory first into the superproject. + +# Internal function; use test_submodule_switch_recursing_with_args() or +# test_submodule_forced_switch_recursing_with_args() instead. +test_submodule_recursing_with_args_common() { + command="$1" + + ######################### Appearing submodule ######################### + # Switching to a commit letting a submodule appear checks it out ... + test_expect_success "$command: added submodule is checked out" ' prolog && - reset_work_tree_to no_submodule && + reset_work_tree_to_interested no_submodule && ( cd submodule_update && git branch -t add_sub1 origin/add_sub1 && - mkdir sub1 && $command add_sub1 && test_superproject_content origin/add_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && test_submodule_content sub1 origin/add_sub1 ) ' - # ... unless there is an untracked file in its place. - test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" ' + # ... ignoring an empty existing directory. + test_expect_success "$command: added submodule is checked out in empty dir" ' prolog && - reset_work_tree_to no_submodule && + reset_work_tree_to_interested no_submodule && ( cd submodule_update && + mkdir sub1 && git branch -t add_sub1 origin/add_sub1 && - >sub1 && $command add_sub1 && test_superproject_content origin/add_sub1 && - test_dir_is_empty sub1 + test_submodule_content sub1 origin/add_sub1 ) ' - # Replacing a tracked file with a submodule produces an empty - # directory ... - test_expect_success "$command: replace tracked file with submodule creates empty directory" ' + test_expect_success "$command: submodule branch is not changed, detach HEAD instead" ' prolog && - reset_work_tree_to replace_sub1_with_file && + reset_work_tree_to_interested add_sub1 && + ( + cd submodule_update && + git -C sub1 checkout -b keep_branch && + git -C sub1 rev-parse HEAD >expect && + git branch -t modify_sub1 origin/modify_sub1 && + $command modify_sub1 && + test_superproject_content origin/modify_sub1 && + test_submodule_content sub1 origin/modify_sub1 && + git -C sub1 rev-parse keep_branch >actual && + test_cmp expect actual && + test_must_fail git -C sub1 symbolic-ref HEAD + ) + ' + + # Replacing a tracked file with a submodule produces a checked out submodule + test_expect_success "$command: replace tracked file with submodule checks out submodule" ' + prolog && + reset_work_tree_to_interested replace_sub1_with_file && ( cd submodule_update && git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && $command replace_file_with_sub1 && test_superproject_content origin/replace_file_with_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && test_submodule_content sub1 origin/replace_file_with_sub1 ) ' - # ... as does removing a directory with tracked files with a - # submodule. + # ... as does removing a directory with tracked files with a submodule. test_expect_success "$command: replace directory with submodule" ' prolog && - reset_work_tree_to replace_sub1_with_directory && + reset_work_tree_to_interested replace_sub1_with_directory && ( cd submodule_update && git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && $command replace_directory_with_sub1 && test_superproject_content origin/replace_directory_with_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && test_submodule_content sub1 origin/replace_directory_with_sub1 ) ' ######################## Disappearing submodule ####################### - # Removing a submodule doesn't remove its work tree ... - test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" ' + # Removing a submodule removes its work tree ... + test_expect_success "$command: removed submodule removes submodules working tree" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t remove_sub1 origin/remove_sub1 && $command remove_sub1 && test_superproject_content origin/remove_sub1 && - test_submodule_content sub1 origin/add_sub1 + ! test -e sub1 ) ' - # ... especially when it contains a .git directory. - test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" ' + # ... absorbing a .git directory along the way. + test_expect_success "$command: removed submodule absorbs submodules .git directory" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t remove_sub1 origin/remove_sub1 && replace_gitfile_with_git_dir sub1 && + rm -rf .git/modules && $command remove_sub1 && test_superproject_content origin/remove_sub1 && - test_git_directory_is_unchanged sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # Replacing a submodule with files in a directory must fail as the - # submodule work tree isn't removed ... - test_expect_failure "$command: replace submodule with a directory must fail" ' - prolog && - reset_work_tree_to add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && - test_must_fail $command replace_sub1_with_directory && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... especially when it contains a .git directory. - test_expect_failure "$command: replace submodule containing a .git directory with a directory must fail" ' - prolog && - reset_work_tree_to add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && - replace_gitfile_with_git_dir sub1 && - test_must_fail $command replace_sub1_with_directory && - test_superproject_content origin/add_sub1 && - test_git_directory_is_unchanged sub1 && - test_submodule_content sub1 origin/add_sub1 + ! test -e sub1 && + test_git_directory_exists sub1 ) ' - # Replacing it with a file must fail as it could throw away any local - # work tree changes ... - test_expect_failure "$command: replace submodule with a file must fail" ' + + # Replacing it with a file ... + test_expect_success "$command: replace submodule with a file" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - test_must_fail $command replace_sub1_with_file && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 + $command replace_sub1_with_file && + test_superproject_content origin/replace_sub1_with_file && + test -f sub1 ) ' - # ... or even destroy unpushed parts of submodule history if that - # still uses a .git directory. - test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" ' + RESULTDS=success + if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1 + then + RESULTDS=failure + fi + # ... must check its local work tree for untracked files + test_expect_$RESULTDS "$command: replace submodule with a file must fail with untracked files" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - replace_gitfile_with_git_dir sub1 && + : >sub1/untrackedfile && test_must_fail $command replace_sub1_with_file && test_superproject_content origin/add_sub1 && - test_git_directory_is_unchanged sub1 && test_submodule_content sub1 origin/add_sub1 + test -f sub1/untracked_file ) ' ########################## Modified submodule ######################### - # Updating a submodule sha1 doesn't update the submodule's work tree - test_expect_success "$command: modified submodule does not update submodule work tree" ' + # Updating a submodule sha1 updates the submodule's work tree + test_expect_success "$command: modified submodule updates submodule work tree" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t modify_sub1 origin/modify_sub1 && $command modify_sub1 && test_superproject_content origin/modify_sub1 && - test_submodule_content sub1 origin/add_sub1 && - git submodule update && test_submodule_content sub1 origin/modify_sub1 ) ' # Updating a submodule to an invalid sha1 doesn't update the - # submodule's work tree, subsequent update will fail - test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" ' + # superproject nor the submodule's work tree. + test_expect_success "$command: updating to a missing submodule commit fails" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t invalid_sub1 origin/invalid_sub1 && - $command invalid_sub1 && - test_superproject_content origin/invalid_sub1 && - test_submodule_content sub1 origin/add_sub1 && - test_must_fail git submodule update && + test_must_fail $command invalid_sub1 && + test_superproject_content origin/add_sub1 && test_submodule_content sub1 origin/add_sub1 ) ' - # Updating a submodule from an invalid sha1 doesn't update the - # submodule's work tree, subsequent update will succeed - test_expect_success "$command: modified submodule does not update submodule work tree from invalid commit" ' - prolog && - reset_work_tree_to invalid_sub1 && - ( - cd submodule_update && - git branch -t valid_sub1 origin/valid_sub1 && - $command valid_sub1 && - test_superproject_content origin/valid_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && - test_submodule_content sub1 origin/valid_sub1 - ) - ' } -# Test that submodule contents are correctly updated when switching -# between commits that change a submodule. -# Test that the following transitions are correctly handled: -# (These tests are also above in the case where we expect no change -# in the submodule) -# - Updated submodule -# - New submodule -# - Removed submodule -# - Directory containing tracked files replaced by submodule -# - Submodule replaced by tracked files in directory -# - Submodule replaced by tracked file with the same name -# - tracked file replaced by submodule +# Declares and invokes several tests that, in various situations, checks that +# the provided Git command, when invoked with --recurse-submodules: +# - succeeds in updating the worktree and index of a superproject to a target +# commit, or fails atomically (depending on the test situation) +# - if succeeds, the contents of submodule directories are updated # -# New test cases -# - Removing a submodule with a git directory absorbs the submodules -# git directory first into the superproject. - +# Specify the Git command so that "git $GIT_COMMAND --recurse-submodules" +# works. +# +# If the command under test is known to not work with submodules in certain +# conditions, set the appropriate KNOWN_FAILURE_* variable used in the tests +# below to 1. +# +# Use as follows: +# +# test_submodule_switch_recursing_with_args "$GIT_COMMAND" test_submodule_switch_recursing_with_args () { cmd_args="$1" command="git $cmd_args --recurse-submodules" + test_submodule_recursing_with_args_common "$command" + RESULTDS=success if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1 then @@ -794,33 +819,8 @@ test_submodule_switch_recursing_with_args () { then RESULTOI=failure fi - ######################### Appearing submodule ######################### - # Switching to a commit letting a submodule appear checks it out ... - test_expect_success "$command: added submodule is checked out" ' - prolog && - reset_work_tree_to_interested no_submodule && - ( - cd submodule_update && - git branch -t add_sub1 origin/add_sub1 && - $command add_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... ignoring an empty existing directory ... - test_expect_success "$command: added submodule is checked out in empty dir" ' - prolog && - reset_work_tree_to_interested no_submodule && - ( - cd submodule_update && - mkdir sub1 && - git branch -t add_sub1 origin/add_sub1 && - $command add_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... unless there is an untracked file in its place. + # Switching to a commit letting a submodule appear cannot override an + # untracked file. test_expect_success "$command: added submodule doesn't remove untracked file with same name" ' prolog && reset_work_tree_to_interested no_submodule && @@ -848,59 +848,7 @@ test_submodule_switch_recursing_with_args () { test_submodule_content sub1 origin/add_sub1 ) ' - # Replacing a tracked file with a submodule produces a checked out submodule - test_expect_success "$command: replace tracked file with submodule checks out submodule" ' - prolog && - reset_work_tree_to_interested replace_sub1_with_file && - ( - cd submodule_update && - git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && - $command replace_file_with_sub1 && - test_superproject_content origin/replace_file_with_sub1 && - test_submodule_content sub1 origin/replace_file_with_sub1 - ) - ' - # ... as does removing a directory with tracked files with a submodule. - test_expect_success "$command: replace directory with submodule" ' - prolog && - reset_work_tree_to_interested replace_sub1_with_directory && - ( - cd submodule_update && - git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && - $command replace_directory_with_sub1 && - test_superproject_content origin/replace_directory_with_sub1 && - test_submodule_content sub1 origin/replace_directory_with_sub1 - ) - ' - ######################## Disappearing submodule ####################### - # Removing a submodule removes its work tree ... - test_expect_success "$command: removed submodule removes submodules working tree" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t remove_sub1 origin/remove_sub1 && - $command remove_sub1 && - test_superproject_content origin/remove_sub1 && - ! test -e sub1 - ) - ' - # ... absorbing a .git directory along the way. - test_expect_success "$command: removed submodule absorbs submodules .git directory" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t remove_sub1 origin/remove_sub1 && - replace_gitfile_with_git_dir sub1 && - rm -rf .git/modules && - $command remove_sub1 && - test_superproject_content origin/remove_sub1 && - ! test -e sub1 && - test_git_directory_exists sub1 - ) - ' # Replacing a submodule with files in a directory must succeeds # when the submodule is clean test_expect_$RESULTDS "$command: replace submodule with a directory" ' @@ -929,33 +877,6 @@ test_submodule_switch_recursing_with_args () { ) ' - # Replacing it with a file ... - test_expect_success "$command: replace submodule with a file" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - $command replace_sub1_with_file && - test_superproject_content origin/replace_sub1_with_file && - test -f sub1 - ) - ' - - # ... must check its local work tree for untracked files - test_expect_$RESULTDS "$command: replace submodule with a file must fail with untracked files" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - : >sub1/untrackedfile && - test_must_fail $command replace_sub1_with_file && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... and ignored files are ignored test_expect_success "$command: replace submodule with a file works ignores ignored files in submodule" ' test_when_finished "rm submodule_update/.git/modules/sub1/info/exclude" && @@ -964,6 +885,7 @@ test_submodule_switch_recursing_with_args () { ( cd submodule_update && git branch -t replace_sub1_with_file origin/replace_sub1_with_file && + echo ignored >.git/modules/sub1/info/exclude && : >sub1/ignored && $command replace_sub1_with_file && test_superproject_content origin/replace_sub1_with_file && @@ -971,20 +893,6 @@ test_submodule_switch_recursing_with_args () { ) ' - ########################## Modified submodule ######################### - # Updating a submodule sha1 updates the submodule's work tree - test_expect_success "$command: modified submodule updates submodule work tree" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t modify_sub1 origin/modify_sub1 && - $command modify_sub1 && - test_superproject_content origin/modify_sub1 && - test_submodule_content sub1 origin/modify_sub1 - ) - ' - test_expect_success "git -c submodule.recurse=true $cmd_args: modified submodule updates submodule work tree" ' prolog && reset_work_tree_to_interested add_sub1 && @@ -997,20 +905,6 @@ test_submodule_switch_recursing_with_args () { ) ' - # Updating a submodule to an invalid sha1 doesn't update the - # superproject nor the submodule's work tree. - test_expect_success "$command: updating to a missing submodule commit fails" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t invalid_sub1 origin/invalid_sub1 && - test_must_fail $command invalid_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # recursing deeper than one level doesn't work yet. test_expect_success "$command: modified submodule updates submodule recursively" ' prolog && @@ -1026,44 +920,20 @@ test_submodule_switch_recursing_with_args () { ' } -# Test that submodule contents are updated when switching between commits -# that change a submodule, but throwing away local changes in -# the superproject as well as the submodule is allowed. +# Same as test_submodule_switch_recursing_with_args(), except that throwing +# away local changes in the superproject is allowed. test_submodule_forced_switch_recursing_with_args () { cmd_args="$1" command="git $cmd_args --recurse-submodules" + test_submodule_recursing_with_args_common "$command" + RESULT=success if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1 then RESULT=failure fi - ######################### Appearing submodule ######################### - # Switching to a commit letting a submodule appear creates empty dir ... - test_expect_success "$command: added submodule is checked out" ' - prolog && - reset_work_tree_to_interested no_submodule && - ( - cd submodule_update && - git branch -t add_sub1 origin/add_sub1 && - $command add_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... and doesn't care if it already exists ... - test_expect_success "$command: added submodule ignores empty directory" ' - prolog && - reset_work_tree_to_interested no_submodule && - ( - cd submodule_update && - git branch -t add_sub1 origin/add_sub1 && - mkdir sub1 && - $command add_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... not caring about an untracked file either + # Switching to a commit letting a submodule appear does not care about + # an untracked file. test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" ' prolog && reset_work_tree_to_interested no_submodule && @@ -1076,60 +946,7 @@ test_submodule_forced_switch_recursing_with_args () { test_submodule_content sub1 origin/add_sub1 ) ' - # Replacing a tracked file with a submodule checks out the submodule - test_expect_success "$command: replace tracked file with submodule populates the submodule" ' - prolog && - reset_work_tree_to_interested replace_sub1_with_file && - ( - cd submodule_update && - git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && - $command replace_file_with_sub1 && - test_superproject_content origin/replace_file_with_sub1 && - test_submodule_content sub1 origin/replace_file_with_sub1 - ) - ' - # ... as does removing a directory with tracked files with a - # submodule. - test_expect_success "$command: replace directory with submodule" ' - prolog && - reset_work_tree_to_interested replace_sub1_with_directory && - ( - cd submodule_update && - git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && - $command replace_directory_with_sub1 && - test_superproject_content origin/replace_directory_with_sub1 && - test_submodule_content sub1 origin/replace_directory_with_sub1 - ) - ' - ######################## Disappearing submodule ####################### - # Removing a submodule doesn't remove its work tree ... - test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t remove_sub1 origin/remove_sub1 && - $command remove_sub1 && - test_superproject_content origin/remove_sub1 && - ! test -e sub1 - ) - ' - # ... especially when it contains a .git directory. - test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t remove_sub1 origin/remove_sub1 && - replace_gitfile_with_git_dir sub1 && - rm -rf .git/modules/sub1 && - $command remove_sub1 && - test_superproject_content origin/remove_sub1 && - test_git_directory_exists sub1 && - ! test -e sub1 - ) - ' # Replacing a submodule with files in a directory ... test_expect_success "$command: replace submodule with a directory" ' prolog && @@ -1156,17 +973,6 @@ test_submodule_forced_switch_recursing_with_args () { test_git_directory_exists sub1 ) ' - # Replacing it with a file - test_expect_success "$command: replace submodule with a file" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - $command replace_sub1_with_file && - test_superproject_content origin/replace_sub1_with_file - ) - ' # ... even if the submodule contains ignored files test_expect_success "$command: replace submodule with a file ignoring ignored files" ' @@ -1181,46 +987,6 @@ test_submodule_forced_switch_recursing_with_args () { ) ' - # ... but stops for untracked files that would be lost - test_expect_$RESULT "$command: replace submodule with a file stops for untracked files" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - : >sub1/untracked_file && - test_must_fail $command replace_sub1_with_file && - test_superproject_content origin/add_sub1 && - test -f sub1/untracked_file - ) - ' - - ########################## Modified submodule ######################### - # Updating a submodule sha1 updates the submodule's work tree - test_expect_success "$command: modified submodule updates submodule work tree" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t modify_sub1 origin/modify_sub1 && - $command modify_sub1 && - test_superproject_content origin/modify_sub1 && - test_submodule_content sub1 origin/modify_sub1 - ) - ' - # Updating a submodule to an invalid sha1 doesn't update the - # submodule's work tree, subsequent update will fail - test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t invalid_sub1 origin/invalid_sub1 && - test_must_fail $command invalid_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' # Updating a submodule from an invalid sha1 updates test_expect_success "$command: modified submodule does update submodule work tree from invalid commit" ' prolog && @@ -1249,4 +1015,18 @@ test_submodule_forced_switch_recursing_with_args () { test_submodule_content sub1 origin/modify_sub1 ) ' + + test_expect_success "$command: changed submodule worktree is reset" ' + prolog && + reset_work_tree_to_interested add_sub1 && + ( + cd submodule_update && + rm sub1/file1 && + : >sub1/new_file && + git -C sub1 add new_file && + $command HEAD && + test_path_is_file sub1/file1 && + test_path_is_missing sub1/new_file + ) + ' } diff --git a/t/lib-terminal.sh b/t/lib-terminal.sh index cd220e378e..e3809dcead 100644 --- a/t/lib-terminal.sh +++ b/t/lib-terminal.sh @@ -9,8 +9,8 @@ test_terminal () { echo >&4 "test_terminal: need to declare TTY prerequisite" return 127 fi - perl "$TEST_DIRECTORY"/test-terminal.perl "$@" -} + perl "$TEST_DIRECTORY"/test-terminal.perl "$@" 2>&7 +} 7>&2 2>&4 test_lazy_prereq TTY ' test_have_prereq PERL && diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index 1dbc85b214..bc865160e7 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -1,8 +1,10 @@ #!/usr/bin/perl -use lib '../../perl/blib/lib'; +use lib '../../perl/build/lib'; use strict; use warnings; +use JSON; +use Getopt::Long; use Git; sub get_times { @@ -35,7 +37,31 @@ sub format_times { return $out; } -my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests); +sub usage { + print <<EOT; +./aggregate.perl [options] [--] [<dir_or_rev>...] [--] [<test_script>...] > + + Options: + --codespeed * Format output for Codespeed + --reponame <str> * Send given reponame to codespeed + --sort-by <str> * Sort output (only "regression" criteria is supported) + --subsection <str> * Use results from given subsection + +EOT + exit(1); +} + +my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests, + $codespeed, $sortby, $subsection, $reponame); + +Getopt::Long::Configure qw/ require_order /; + +my $rc = GetOptions("codespeed" => \$codespeed, + "reponame=s" => \$reponame, + "sort-by=s" => \$sortby, + "subsection=s" => \$subsection); +usage() unless $rc; + while (scalar @ARGV) { my $arg = $ARGV[0]; my $dir; @@ -69,12 +95,24 @@ if (not @tests) { @tests = glob "p????-*.sh"; } +my $resultsdir = "test-results"; + +if (! $subsection and + exists $ENV{GIT_PERF_SUBSECTION} and + $ENV{GIT_PERF_SUBSECTION} ne "") { + $subsection = $ENV{GIT_PERF_SUBSECTION}; +} + +if ($subsection) { + $resultsdir .= "/" . $subsection; +} + my @subtests; my %shorttests; for my $t (@tests) { $t =~ s{(?:.*/)?(p(\d+)-[^/]+)\.sh$}{$1} or die "bad test name: $t"; my $n = $2; - my $fname = "test-results/$t.subtests"; + my $fname = "$resultsdir/$t.subtests"; open my $fp, "<", $fname or die "cannot open $fname: $!"; for (<$fp>) { chomp; @@ -95,13 +133,6 @@ sub read_descr { return $line; } -my %descrs; -my $descrlen = 4; # "Test" -for my $t (@subtests) { - $descrs{$t} = $shorttests{$t}.": ".read_descr("test-results/$t.descr"); - $descrlen = length $descrs{$t} if length $descrs{$t}>$descrlen; -} - sub have_duplicate { my %seen; for (@_) { @@ -117,54 +148,168 @@ sub have_slash { return 0; } -my %newdirabbrevs = %dirabbrevs; -while (!have_duplicate(values %newdirabbrevs)) { - %dirabbrevs = %newdirabbrevs; - last if !have_slash(values %dirabbrevs); - %newdirabbrevs = %dirabbrevs; - for (values %newdirabbrevs) { - s{^[^/]*/}{}; - } +sub display_dir { + my ($d) = @_; + return exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}; } -my %times; -my @colwidth = ((0)x@dirs); -for my $i (0..$#dirs) { - my $d = $dirs[$i]; - my $w = length (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); - $colwidth[$i] = $w if $w > $colwidth[$i]; -} -for my $t (@subtests) { - my $firstr; +sub print_default_results { + my %descrs; + my $descrlen = 4; # "Test" + for my $t (@subtests) { + $descrs{$t} = $shorttests{$t}.": ".read_descr("$resultsdir/$t.descr"); + $descrlen = length $descrs{$t} if length $descrs{$t}>$descrlen; + } + + my %newdirabbrevs = %dirabbrevs; + while (!have_duplicate(values %newdirabbrevs)) { + %dirabbrevs = %newdirabbrevs; + last if !have_slash(values %dirabbrevs); + %newdirabbrevs = %dirabbrevs; + for (values %newdirabbrevs) { + s{^[^/]*/}{}; + } + } + + my %times; + my @colwidth = ((0)x@dirs); for my $i (0..$#dirs) { - my $d = $dirs[$i]; - $times{$prefixes{$d}.$t} = [get_times("test-results/$prefixes{$d}$t.times")]; - my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; - my $w = length format_times($r,$u,$s,$firstr); + my $w = length display_dir($dirs[$i]); $colwidth[$i] = $w if $w > $colwidth[$i]; - $firstr = $r unless defined $firstr; + } + for my $t (@subtests) { + my $firstr; + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + $times{$prefixes{$d}.$t} = [get_times("$resultsdir/$prefixes{$d}$t.times")]; + my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; + my $w = length format_times($r,$u,$s,$firstr); + $colwidth[$i] = $w if $w > $colwidth[$i]; + $firstr = $r unless defined $firstr; + } + } + my $totalwidth = 3*@dirs+$descrlen; + $totalwidth += $_ for (@colwidth); + + printf "%-${descrlen}s", "Test"; + for my $i (0..$#dirs) { + printf " %-$colwidth[$i]s", display_dir($dirs[$i]); + } + print "\n"; + print "-"x$totalwidth, "\n"; + for my $t (@subtests) { + printf "%-${descrlen}s", $descrs{$t}; + my $firstr; + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; + printf " %-$colwidth[$i]s", format_times($r,$u,$s,$firstr); + $firstr = $r unless defined $firstr; + } + print "\n"; } } -my $totalwidth = 3*@dirs+$descrlen; -$totalwidth += $_ for (@colwidth); -binmode STDOUT, ":utf8" or die "PANIC on binmode: $!"; +sub print_sorted_results { + my ($sortby) = @_; + + if ($sortby ne "regression") { + print "Only 'regression' is supported as '--sort-by' argument\n"; + usage(); + } + + my @evolutions; + for my $t (@subtests) { + my ($prevr, $prevu, $prevs, $prevrev); + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + my ($r, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.times"); + if ($i > 0 and defined $r and defined $prevr and $prevr > 0) { + my $percent = 100.0 * ($r - $prevr) / $prevr; + push @evolutions, { "percent" => $percent, + "test" => $t, + "prevrev" => $prevrev, + "rev" => $d, + "prevr" => $prevr, + "r" => $r, + "prevu" => $prevu, + "u" => $u, + "prevs" => $prevs, + "s" => $s}; + } + ($prevr, $prevu, $prevs, $prevrev) = ($r, $u, $s, $d); + } + } -printf "%-${descrlen}s", "Test"; -for my $i (0..$#dirs) { - my $d = $dirs[$i]; - printf " %-$colwidth[$i]s", (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); + my @sorted_evolutions = sort { $b->{percent} <=> $a->{percent} } @evolutions; + + for my $e (@sorted_evolutions) { + printf "%+.1f%%", $e->{percent}; + print " " . $e->{test}; + print " " . format_times($e->{prevr}, $e->{prevu}, $e->{prevs}); + print " " . format_times($e->{r}, $e->{u}, $e->{s}); + print " " . display_dir($e->{prevrev}); + print " " . display_dir($e->{rev}); + print "\n"; + } } -print "\n"; -print "-"x$totalwidth, "\n"; -for my $t (@subtests) { - printf "%-${descrlen}s", $descrs{$t}; - my $firstr; - for my $i (0..$#dirs) { - my $d = $dirs[$i]; - my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; - printf " %-$colwidth[$i]s", format_times($r,$u,$s,$firstr); - $firstr = $r unless defined $firstr; + +sub print_codespeed_results { + my ($subsection) = @_; + + my $project = "Git"; + + my $executable = `uname -s -m`; + chomp $executable; + + if ($subsection) { + $executable .= ", " . $subsection; } - print "\n"; + + my $environment; + if ($reponame) { + $environment = $reponame; + } elsif (exists $ENV{GIT_PERF_REPO_NAME} and $ENV{GIT_PERF_REPO_NAME} ne "") { + $environment = $ENV{GIT_PERF_REPO_NAME}; + } elsif (exists $ENV{GIT_TEST_INSTALLED} and $ENV{GIT_TEST_INSTALLED} ne "") { + $environment = $ENV{GIT_TEST_INSTALLED}; + $environment =~ s|/bin-wrappers$||; + } else { + $environment = `uname -r`; + chomp $environment; + } + + my @data; + + for my $t (@subtests) { + for my $d (@dirs) { + my $commitid = $prefixes{$d}; + $commitid =~ s/^build_//; + $commitid =~ s/\.$//; + my ($result_value, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.times"); + + my %vals = ( + "commitid" => $commitid, + "project" => $project, + "branch" => $dirnames{$d}, + "executable" => $executable, + "benchmark" => $shorttests{$t} . " " . read_descr("$resultsdir/$t.descr"), + "environment" => $environment, + "result_value" => $result_value, + ); + push @data, \%vals; + } + } + + print to_json(\@data, {utf8 => 1, pretty => 1, canonical => 1}), "\n"; +} + +binmode STDOUT, ":utf8" or die "PANIC on binmode: $!"; + +if ($codespeed) { + print_codespeed_results($subsection); +} elsif (defined $sortby) { + print_sorted_results($sortby); +} else { + print_default_results(); } diff --git a/t/perf/bisect_regression b/t/perf/bisect_regression new file mode 100755 index 0000000000..a94d9955d0 --- /dev/null +++ b/t/perf/bisect_regression @@ -0,0 +1,73 @@ +#!/bin/sh + +# Read a line coming from `./aggregate.perl --sort-by regression ...` +# and automatically bisect to find the commit responsible for the +# performance regression. +# +# Lines from `./aggregate.perl --sort-by regression ...` look like: +# +# +100.0% p7821-grep-engines-fixed.1 0.04(0.10+0.03) 0.08(0.11+0.08) v2.14.3 v2.15.1 +# +33.3% p7820-grep-engines.1 0.03(0.08+0.02) 0.04(0.08+0.02) v2.14.3 v2.15.1 +# + +die () { + echo >&2 "error: $*" + exit 1 +} + +while [ $# -gt 0 ]; do + arg="$1" + case "$arg" in + --help) + echo "usage: $0 [--config file] [--subsection subsection]" + exit 0 + ;; + --config) + shift + GIT_PERF_CONFIG_FILE=$(cd "$(dirname "$1")"; pwd)/$(basename "$1") + export GIT_PERF_CONFIG_FILE + shift ;; + --subsection) + shift + GIT_PERF_SUBSECTION="$1" + export GIT_PERF_SUBSECTION + shift ;; + --*) + die "unrecognised option: '$arg'" ;; + *) + die "unknown argument '$arg'" + ;; + esac +done + +read -r regression subtest oldtime newtime oldrev newrev + +test_script=$(echo "$subtest" | sed -e 's/\(.*\)\.[0-9]*$/\1.sh/') +test_number=$(echo "$subtest" | sed -e 's/.*\.\([0-9]*\)$/\1/') + +# oldtime and newtime are decimal number, not integers + +oldtime=$(echo "$oldtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') +newtime=$(echo "$newtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') + +test $(echo "$newtime" "$oldtime" | awk '{ print ($1 > $2) }') = 1 || + die "New time '$newtime' shoud be greater than old time '$oldtime'" + +tmpdir=$(mktemp -d -t bisect_regression_XXXXXX) || die "Failed to create temp directory" +echo "$oldtime" >"$tmpdir/oldtime" || die "Failed to write to '$tmpdir/oldtime'" +echo "$newtime" >"$tmpdir/newtime" || die "Failed to write to '$tmpdir/newtime'" + +# Bisecting must be performed from the top level directory (even with --no-checkout) +( + toplevel_dir=$(git rev-parse --show-toplevel) || die "Failed to find top level directory" + cd "$toplevel_dir" || die "Failed to cd into top level directory '$toplevel_dir'" + + git bisect start --no-checkout "$newrev" "$oldrev" || die "Failed to start bisecting" + + git bisect run t/perf/bisect_run_script "$test_script" "$test_number" "$tmpdir" + res="$?" + + git bisect reset + + exit "$res" +) diff --git a/t/perf/bisect_run_script b/t/perf/bisect_run_script new file mode 100755 index 0000000000..038255df4b --- /dev/null +++ b/t/perf/bisect_run_script @@ -0,0 +1,47 @@ +#!/bin/sh + +script="$1" +test_number="$2" +info_dir="$3" + +# This aborts the bisection immediately +die () { + echo >&2 "error: $*" + exit 255 +} + +bisect_head=$(git rev-parse --verify BISECT_HEAD) || die "Failed to find BISECT_HEAD ref" + +script_number=$(echo "$script" | sed -e "s/^p\([0-9]*\).*\$/\1/") || die "Failed to get script number for '$script'" + +oldtime=$(cat "$info_dir/oldtime") || die "Failed to access '$info_dir/oldtime'" +newtime=$(cat "$info_dir/newtime") || die "Failed to access '$info_dir/newtime'" + +cd t/perf || die "Failed to cd into 't/perf'" + +result_file="$info_dir/perf_${script_number}_${bisect_head}_results.txt" + +GIT_PERF_DIRS_OR_REVS="$bisect_head" +export GIT_PERF_DIRS_OR_REVS + +./run "$script" >"$result_file" 2>&1 || die "Failed to run perf test '$script'" + +rtime=$(sed -n "s/^$script_number\.$test_number:.*\([0-9]\+\.[0-9]\+\)(.*).*\$/\1/p" "$result_file") + +echo "newtime: $newtime" +echo "rtime: $rtime" +echo "oldtime: $oldtime" + +# Compare ($newtime - $rtime) with ($rtime - $oldtime) +# Times are decimal number, not integers + +if test $(echo "$newtime" "$rtime" "$oldtime" | awk '{ print ($1 - $2 > $2 - $3) }') = 1 +then + # Current commit is considered "good/old" + echo "$rtime" >"$info_dir/oldtime" + exit 0 +else + # Current commit is considered "bad/new" + echo "$rtime" >"$info_dir/newtime" + exit 1 +fi diff --git a/t/perf/lib-pack.sh b/t/perf/lib-pack.sh new file mode 100644 index 0000000000..d3865db286 --- /dev/null +++ b/t/perf/lib-pack.sh @@ -0,0 +1,25 @@ +# Helpers for dealing with large numbers of packs. + +# create $1 nonsense packs, each with a single blob +create_packs () { + perl -le ' + my ($n) = @ARGV; + for (1..$n) { + print "blob"; + print "data <<EOF"; + print "$_"; + print "EOF"; + print "checkpoint" + } + ' "$@" | + git fast-import +} + +# create a large number of packs, disabling any gc which might +# cause us to repack them +setup_many_packs () { + git config gc.auto 0 && + git config gc.autopacklimit 0 && + git config fastimport.unpacklimit 0 && + create_packs 500 +} diff --git a/t/perf/p0002-read-cache.sh b/t/perf/p0002-read-cache.sh index 9180ae9343..cdd105a594 100755 --- a/t/perf/p0002-read-cache.sh +++ b/t/perf/p0002-read-cache.sh @@ -8,7 +8,7 @@ test_perf_default_repo count=1000 test_perf "read_cache/discard_cache $count times" " - test-read-cache $count + test-tool read-cache $count " test_done diff --git a/t/perf/p0004-lazy-init-name-hash.sh b/t/perf/p0004-lazy-init-name-hash.sh index 8de5a98cfc..1afc08fe7f 100755 --- a/t/perf/p0004-lazy-init-name-hash.sh +++ b/t/perf/p0004-lazy-init-name-hash.sh @@ -7,8 +7,8 @@ test_perf_large_repo test_checkout_worktree test_expect_success 'verify both methods build the same hashmaps' ' - test-lazy-init-name-hash --dump --single >out.single && - if test-lazy-init-name-hash --dump --multi >out.multi + test-tool lazy-init-name-hash --dump --single >out.single && + if test-tool lazy-init-name-hash --dump --multi >out.multi then test_set_prereq REPO_BIG_ENOUGH_FOR_MULTI && sort <out.single >sorted.single && @@ -46,11 +46,11 @@ test_expect_success 'calibrate' ' ' test_perf "single-threaded, $desc" " - test-lazy-init-name-hash --single --count=$count + test-tool lazy-init-name-hash --single --count=$count " test_perf REPO_BIG_ENOUGH_FOR_MULTI "multi-threaded, $desc" " - test-lazy-init-name-hash --multi --count=$count + test-tool lazy-init-name-hash --multi --count=$count " test_done diff --git a/t/perf/p0007-write-cache.sh b/t/perf/p0007-write-cache.sh new file mode 100755 index 0000000000..09595264f0 --- /dev/null +++ b/t/perf/p0007-write-cache.sh @@ -0,0 +1,29 @@ +#!/bin/sh + +test_description="Tests performance of writing the index" + +. ./perf-lib.sh + +test_perf_default_repo + +test_expect_success "setup repo" ' + if git rev-parse --verify refs/heads/p0006-ballast^{commit} + then + echo Assuming synthetic repo from many-files.sh + git config --local core.sparsecheckout 1 + cat >.git/info/sparse-checkout <<-EOF + /* + !ballast/* + EOF + else + echo Assuming non-synthetic repo... + fi && + nr_files=$(git ls-files | wc -l) +' + +count=3 +test_perf "write_locked_index $count times ($nr_files files)" " + test-tool write-cache $count +" + +test_done diff --git a/t/perf/p0071-sort.sh b/t/perf/p0071-sort.sh index 7c9a35a646..6e924f5fa3 100755 --- a/t/perf/p0071-sort.sh +++ b/t/perf/p0071-sort.sh @@ -16,7 +16,7 @@ test_perf 'sort(1)' ' ' test_perf 'string_list_sort()' ' - test-string-list sort <unsorted >actual + test-tool string-list sort <unsorted >actual ' test_expect_success 'string_list_sort() sorts like sort(1)' ' diff --git a/t/perf/p4211-line-log.sh b/t/perf/p4211-line-log.sh index b7ff68d4fa..392bcc0e51 100755 --- a/t/perf/p4211-line-log.sh +++ b/t/perf/p4211-line-log.sh @@ -31,4 +31,12 @@ test_perf 'git log -L (renames on)' ' git log -M -L 1:"$file" >/dev/null ' +test_perf 'git log --oneline --raw --parents' ' + git log --oneline --raw --parents >/dev/null +' + +test_perf 'git log --oneline --raw --parents -1000' ' + git log --oneline --raw --parents -1000 >/dev/null +' + test_done diff --git a/t/perf/p5550-fetch-tags.sh b/t/perf/p5550-fetch-tags.sh index a5dc39f86a..d0e0e019ea 100755 --- a/t/perf/p5550-fetch-tags.sh +++ b/t/perf/p5550-fetch-tags.sh @@ -20,6 +20,7 @@ start to show a noticeable performance problem on my machine, but without taking too long to set up and run the tests. ' . ./perf-lib.sh +. "$TEST_DIRECTORY/perf/lib-pack.sh" # make a long nonsense history on branch $1, consisting of $2 commits, each # with a unique file pointing to the blob at $2. @@ -44,26 +45,6 @@ create_tags () { git update-ref --stdin } -# create $1 nonsense packs, each with a single blob -create_packs () { - perl -le ' - my ($n) = @ARGV; - for (1..$n) { - print "blob"; - print "data <<EOF"; - print "$_"; - print "EOF"; - } - ' "$@" | - git fast-import && - - git cat-file --batch-all-objects --batch-check='%(objectname)' | - while read sha1 - do - echo $sha1 | git pack-objects .git/objects/pack/pack - done -} - test_expect_success 'create parent and child' ' git init parent && git -C parent commit --allow-empty -m base && @@ -84,9 +65,7 @@ test_expect_success 'populate parent tags' ' test_expect_success 'create child packs' ' ( cd child && - git config gc.auto 0 && - git config gc.autopacklimit 0 && - create_packs 500 + setup_many_packs ) ' diff --git a/t/perf/p5551-fetch-rescan.sh b/t/perf/p5551-fetch-rescan.sh new file mode 100755 index 0000000000..b99dc23e32 --- /dev/null +++ b/t/perf/p5551-fetch-rescan.sh @@ -0,0 +1,55 @@ +#!/bin/sh + +test_description='fetch performance with many packs + +It is common for fetch to consider objects that we might not have, and it is an +easy mistake for the code to use a function like `parse_object` that might +give the correct _answer_ on such an object, but do so slowly (due to +re-scanning the pack directory for lookup failures). + +The resulting performance drop can be hard to notice in a real repository, but +becomes quite large in a repository with a large number of packs. So this +test creates a more pathological case, since any mistakes would produce a more +noticeable slowdown. +' +. ./perf-lib.sh +. "$TEST_DIRECTORY"/perf/lib-pack.sh + +test_expect_success 'create parent and child' ' + git init parent && + git clone parent child +' + + +test_expect_success 'create refs in the parent' ' + ( + cd parent && + git commit --allow-empty -m foo && + head=$(git rev-parse HEAD) && + test_seq 1000 | + sed "s,.*,update refs/heads/& $head," | + $MODERN_GIT update-ref --stdin + ) +' + +test_expect_success 'create many packs in the child' ' + ( + cd child && + setup_many_packs + ) +' + +test_perf 'fetch' ' + # start at the same state for each iteration + obj=$($MODERN_GIT -C parent rev-parse HEAD) && + ( + cd child && + $MODERN_GIT for-each-ref --format="delete %(refname)" refs/remotes | + $MODERN_GIT update-ref --stdin && + rm -vf .git/objects/$(echo $obj | sed "s|^..|&/|") && + + git fetch + ) +' + +test_done diff --git a/t/perf/p7519-fsmonitor.sh b/t/perf/p7519-fsmonitor.sh new file mode 100755 index 0000000000..def7ecdbc7 --- /dev/null +++ b/t/perf/p7519-fsmonitor.sh @@ -0,0 +1,183 @@ +#!/bin/sh + +test_description="Test core.fsmonitor" + +. ./perf-lib.sh + +# +# Performance test for the fsmonitor feature which enables git to talk to a +# file system change monitor and avoid having to scan the working directory +# for new or modified files. +# +# By default, the performance test will utilize the Watchman file system +# monitor if it is installed. If Watchman is not installed, it will use a +# dummy integration script that does not report any new or modified files. +# The dummy script has very little overhead which provides optimistic results. +# +# The performance test will also use the untracked cache feature if it is +# available as fsmonitor uses it to speed up scanning for untracked files. +# +# There are 3 environment variables that can be used to alter the default +# behavior of the performance test: +# +# GIT_PERF_7519_UNTRACKED_CACHE: used to configure core.untrackedCache +# GIT_PERF_7519_SPLIT_INDEX: used to configure core.splitIndex +# GIT_PERF_7519_FSMONITOR: used to configure core.fsMonitor +# +# The big win for using fsmonitor is the elimination of the need to scan the +# working directory looking for changed and untracked files. If the file +# information is all cached in RAM, the benefits are reduced. +# +# GIT_PERF_7519_DROP_CACHE: if set, the OS caches are dropped between tests +# + +test_perf_large_repo +test_checkout_worktree + +test_lazy_prereq UNTRACKED_CACHE ' + { git update-index --test-untracked-cache; ret=$?; } && + test $ret -ne 1 +' + +test_lazy_prereq WATCHMAN ' + command -v watchman +' + +if test_have_prereq WATCHMAN +then + # Convert unix style paths to escaped Windows style paths for Watchman + case "$(uname -s)" in + MSYS_NT*) + GIT_WORK_TREE="$(cygpath -aw "$PWD" | sed 's,\\,/,g')" + ;; + *) + GIT_WORK_TREE="$PWD" + ;; + esac +fi + +if test -n "$GIT_PERF_7519_DROP_CACHE" +then + # When using GIT_PERF_7519_DROP_CACHE, GIT_PERF_REPEAT_COUNT must be 1 to + # generate valid results. Otherwise the caching that happens for the nth + # run will negate the validity of the comparisons. + if test "$GIT_PERF_REPEAT_COUNT" -ne 1 + then + echo "warning: Setting GIT_PERF_REPEAT_COUNT=1" >&2 + GIT_PERF_REPEAT_COUNT=1 + fi +fi + +test_expect_success "setup for fsmonitor" ' + # set untrackedCache depending on the environment + if test -n "$GIT_PERF_7519_UNTRACKED_CACHE" + then + git config core.untrackedCache "$GIT_PERF_7519_UNTRACKED_CACHE" + else + if test_have_prereq UNTRACKED_CACHE + then + git config core.untrackedCache true + else + git config core.untrackedCache false + fi + fi && + + # set core.splitindex depending on the environment + if test -n "$GIT_PERF_7519_SPLIT_INDEX" + then + git config core.splitIndex "$GIT_PERF_7519_SPLIT_INDEX" + fi && + + # set INTEGRATION_SCRIPT depending on the environment + if test -n "$GIT_PERF_7519_FSMONITOR" + then + INTEGRATION_SCRIPT="$GIT_PERF_7519_FSMONITOR" + else + # + # Choose integration script based on existence of Watchman. + # If Watchman exists, watch the work tree and attempt a query. + # If everything succeeds, use Watchman integration script, + # else fall back to an empty integration script. + # + mkdir .git/hooks && + if test_have_prereq WATCHMAN + then + INTEGRATION_SCRIPT=".git/hooks/fsmonitor-watchman" && + cp "$TEST_DIRECTORY/../templates/hooks--fsmonitor-watchman.sample" "$INTEGRATION_SCRIPT" && + watchman watch "$GIT_WORK_TREE" && + watchman watch-list | grep -q -F "$GIT_WORK_TREE" + else + INTEGRATION_SCRIPT=".git/hooks/fsmonitor-empty" && + write_script "$INTEGRATION_SCRIPT"<<-\EOF + EOF + fi + fi && + + git config core.fsmonitor "$INTEGRATION_SCRIPT" && + git update-index --fsmonitor +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-tool drop-caches +fi + +test_perf "status (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-tool drop-caches +fi + +test_perf "status -uno (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status -uno +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-tool drop-caches +fi + +test_perf "status -uall (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status -uall +' + +test_expect_success "setup without fsmonitor" ' + unset INTEGRATION_SCRIPT && + git config --unset core.fsmonitor && + git update-index --no-fsmonitor +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-tool drop-caches +fi + +test_perf "status (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-tool drop-caches +fi + +test_perf "status -uno (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status -uno +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-tool drop-caches +fi + +test_perf "status -uall (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status -uall +' + +if test_have_prereq WATCHMAN +then + watchman watch-del "$GIT_WORK_TREE" >/dev/null 2>&1 && + + # Work around Watchman bug on Windows where it holds on to handles + # preventing the removal of the trash directory + watchman shutdown-server >/dev/null 2>&1 +fi + +test_done diff --git a/t/perf/p7820-grep-engines.sh b/t/perf/p7820-grep-engines.sh index 62aba19e76..8b09c5bf32 100755 --- a/t/perf/p7820-grep-engines.sh +++ b/t/perf/p7820-grep-engines.sh @@ -12,6 +12,9 @@ e.g. GIT_PERF_7820_GREP_OPTS=' -i'. Some options to try: -vi -vw -viw + +If GIT_PERF_GREP_THREADS is set to a list of threads (e.g. '1 4 8' +etc.) we will test the patterns under those numbers of threads. " . ./perf-lib.sh @@ -19,6 +22,11 @@ e.g. GIT_PERF_7820_GREP_OPTS=' -i'. Some options to try: test_perf_large_repo test_checkout_worktree +if test -n "$GIT_PERF_GREP_THREADS" +then + test_set_prereq PERF_GREP_ENGINES_THREADS +fi + for pattern in \ 'how.to' \ '^how to' \ @@ -39,18 +47,42 @@ do else prereq="" fi - test_perf $prereq "$engine grep$GIT_PERF_7820_GREP_OPTS '$pattern'" " - git -c grep.patternType=$engine grep$GIT_PERF_7820_GREP_OPTS -- '$pattern' >'out.$engine' || : - " - done - - test_expect_success "assert that all engines found the same for$GIT_PERF_7820_GREP_OPTS '$pattern'" ' - test_cmp out.basic out.extended && - if test_have_prereq PCRE + if ! test_have_prereq PERF_GREP_ENGINES_THREADS then - test_cmp out.basic out.perl + test_perf $prereq "$engine grep$GIT_PERF_7820_GREP_OPTS '$pattern'" " + git -c grep.patternType=$engine grep$GIT_PERF_7820_GREP_OPTS -- '$pattern' >'out.$engine' || : + " + else + for threads in $GIT_PERF_GREP_THREADS + do + test_perf PTHREADS,$prereq "$engine grep$GIT_PERF_7820_GREP_OPTS '$pattern' with $threads threads" " + git -c grep.patternType=$engine -c grep.threads=$threads grep$GIT_PERF_7820_GREP_OPTS -- '$pattern' >'out.$engine.$threads' || : + " + done fi - ' + done + + if ! test_have_prereq PERF_GREP_ENGINES_THREADS + then + test_expect_success "assert that all engines found the same for$GIT_PERF_7820_GREP_OPTS '$pattern'" ' + test_cmp out.basic out.extended && + if test_have_prereq PCRE + then + test_cmp out.basic out.perl + fi + ' + else + for threads in $GIT_PERF_GREP_THREADS + do + test_expect_success PTHREADS "assert that all engines found the same for$GIT_PERF_7820_GREP_OPTS '$pattern' under threading" " + test_cmp out.basic.$threads out.extended.$threads && + if test_have_prereq PCRE + then + test_cmp out.basic.$threads out.perl.$threads + fi + " + done + fi done test_done diff --git a/t/perf/p7821-grep-engines-fixed.sh b/t/perf/p7821-grep-engines-fixed.sh index c7ef1e198f..61e41b82cf 100755 --- a/t/perf/p7821-grep-engines-fixed.sh +++ b/t/perf/p7821-grep-engines-fixed.sh @@ -6,6 +6,9 @@ Set GIT_PERF_7821_GREP_OPTS in the environment to pass options to git-grep. Make sure to include a leading space, e.g. GIT_PERF_7821_GREP_OPTS=' -w'. See p7820-grep-engines.sh for more options to try. + +If GIT_PERF_7821_THREADS is set to a list of threads (e.g. '1 4 8' +etc.) we will test the patterns under those numbers of threads. " . ./perf-lib.sh @@ -13,6 +16,11 @@ options to try. test_perf_large_repo test_checkout_worktree +if test -n "$GIT_PERF_GREP_THREADS" +then + test_set_prereq PERF_GREP_ENGINES_THREADS +fi + for pattern in 'int' 'uncommon' 'æ' do for engine in fixed basic extended perl @@ -23,19 +31,44 @@ do else prereq="" fi - test_perf $prereq "$engine grep$GIT_PERF_7821_GREP_OPTS $pattern" " - git -c grep.patternType=$engine grep$GIT_PERF_7821_GREP_OPTS $pattern >'out.$engine' || : - " - done - - test_expect_success "assert that all engines found the same for$GIT_PERF_7821_GREP_OPTS $pattern" ' - test_cmp out.fixed out.basic && - test_cmp out.fixed out.extended && - if test_have_prereq PCRE + if ! test_have_prereq PERF_GREP_ENGINES_THREADS then - test_cmp out.fixed out.perl + test_perf $prereq "$engine grep$GIT_PERF_7821_GREP_OPTS $pattern" " + git -c grep.patternType=$engine grep$GIT_PERF_7821_GREP_OPTS $pattern >'out.$engine' || : + " + else + for threads in $GIT_PERF_GREP_THREADS + do + test_perf PTHREADS,$prereq "$engine grep$GIT_PERF_7821_GREP_OPTS $pattern with $threads threads" " + git -c grep.patternType=$engine -c grep.threads=$threads grep$GIT_PERF_7821_GREP_OPTS $pattern >'out.$engine.$threads' || : + " + done fi - ' + done + + if ! test_have_prereq PERF_GREP_ENGINES_THREADS + then + test_expect_success "assert that all engines found the same for$GIT_PERF_7821_GREP_OPTS $pattern" ' + test_cmp out.fixed out.basic && + test_cmp out.fixed out.extended && + if test_have_prereq PCRE + then + test_cmp out.fixed out.perl + fi + ' + else + for threads in $GIT_PERF_GREP_THREADS + do + test_expect_success PTHREADS "assert that all engines found the same for$GIT_PERF_7821_GREP_OPTS $pattern under threading" " + test_cmp out.fixed.$threads out.basic.$threads && + test_cmp out.fixed.$threads out.extended.$threads && + if test_have_prereq PCRE + then + test_cmp out.fixed.$threads out.perl.$threads + fi + " + done + fi done test_done diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh index b50211b259..e4c343a6b7 100644 --- a/t/perf/perf-lib.sh +++ b/t/perf/perf-lib.sh @@ -56,12 +56,10 @@ MODERN_GIT=$GIT_BUILD_DIR/bin-wrappers/git export MODERN_GIT perf_results_dir=$TEST_OUTPUT_DIRECTORY/test-results +test -n "$GIT_PERF_SUBSECTION" && perf_results_dir="$perf_results_dir/$GIT_PERF_SUBSECTION" mkdir -p "$perf_results_dir" rm -f "$perf_results_dir"/$(basename "$0" .sh).subtests -if test -z "$GIT_PERF_REPEAT_COUNT"; then - GIT_PERF_REPEAT_COUNT=3 -fi die_if_build_dir_not_repo () { if ! ( cd "$TEST_DIRECTORY/.." && git rev-parse --build-dir >/dev/null 2>&1 ); then diff --git a/t/perf/run b/t/perf/run index beb4acc0e4..9aaa733c77 100755 --- a/t/perf/run +++ b/t/perf/run @@ -1,17 +1,35 @@ #!/bin/sh -case "$1" in - --help) - echo "usage: $0 [other_git_tree...] [--] [test_scripts]" - exit 0 - ;; -esac - die () { echo >&2 "error: $*" exit 1 } +while [ $# -gt 0 ]; do + arg="$1" + case "$arg" in + --) + break ;; + --help) + echo "usage: $0 [--config file] [--subsection subsec] [other_git_tree...] [--] [test_scripts]" + exit 0 ;; + --config) + shift + GIT_PERF_CONFIG_FILE=$(cd "$(dirname "$1")"; pwd)/$(basename "$1") + export GIT_PERF_CONFIG_FILE + shift ;; + --subsection) + shift + GIT_PERF_SUBSECTION="$1" + export GIT_PERF_SUBSECTION + shift ;; + --*) + die "unrecognised option: '$arg'" ;; + *) + break ;; + esac +done + run_one_dir () { if test $# -eq 0; then set -- p????-*.sh @@ -29,8 +47,10 @@ unpack_git_rev () { (cd "$(git rev-parse --show-cdup)" && git archive --format=tar $rev) | (cd build/$rev && tar x) } + build_git_rev () { rev=$1 + name="$2" for config in config.mak config.mak.autogen config.status do if test -e "../../$config" @@ -38,7 +58,7 @@ build_git_rev () { cp "../../$config" "build/$rev/" fi done - echo "=== Building $rev ===" + echo "=== Building $rev ($name) ===" ( cd build/$rev && if test -n "$GIT_PERF_MAKE_COMMAND" @@ -65,7 +85,7 @@ run_dirs_helper () { if [ ! -d build/$rev ]; then unpack_git_rev $rev fi - build_git_rev $rev + build_git_rev $rev "$mydir" mydir=build/$rev fi if test "$mydir" = .; then @@ -87,14 +107,118 @@ run_dirs () { done } -GIT_PERF_AGGREGATING_LATER=t -export GIT_PERF_AGGREGATING_LATER +get_subsections () { + section="$1" + test -z "$GIT_PERF_CONFIG_FILE" && return + git config -f "$GIT_PERF_CONFIG_FILE" --name-only --get-regex "$section\..*\.[^.]+" | + sed -e "s/$section\.\(.*\)\..*/\1/" | sort | uniq +} + +get_var_from_env_or_config () { + env_var="$1" + conf_sec="$2" + conf_var="$3" + conf_opts="$4" # optional + + # Do nothing if the env variable is already set + eval "test -z \"\${$env_var+x}\"" || return + + test -z "$GIT_PERF_CONFIG_FILE" && return + + # Check if the variable is in the config file + if test -n "$GIT_PERF_SUBSECTION" + then + var="$conf_sec.$GIT_PERF_SUBSECTION.$conf_var" + conf_value=$(git config $conf_opts -f "$GIT_PERF_CONFIG_FILE" "$var") && + eval "$env_var=\"$conf_value\"" && return + fi + var="$conf_sec.$conf_var" + conf_value=$(git config $conf_opts -f "$GIT_PERF_CONFIG_FILE" "$var") && + eval "$env_var=\"$conf_value\"" +} + +run_subsection () { + get_var_from_env_or_config "GIT_PERF_REPEAT_COUNT" "perf" "repeatCount" "--int" + : ${GIT_PERF_REPEAT_COUNT:=3} + export GIT_PERF_REPEAT_COUNT + + get_var_from_env_or_config "GIT_PERF_DIRS_OR_REVS" "perf" "dirsOrRevs" + set -- $GIT_PERF_DIRS_OR_REVS "$@" + + get_var_from_env_or_config "GIT_PERF_MAKE_COMMAND" "perf" "makeCommand" + get_var_from_env_or_config "GIT_PERF_MAKE_OPTS" "perf" "makeOpts" + + get_var_from_env_or_config "GIT_PERF_REPO_NAME" "perf" "repoName" + export GIT_PERF_REPO_NAME + + GIT_PERF_AGGREGATING_LATER=t + export GIT_PERF_AGGREGATING_LATER + + if test $# = 0 -o "$1" = -- -o -f "$1"; then + set -- . "$@" + fi + + codespeed_opt= + test "$GIT_PERF_CODESPEED_OUTPUT" = "true" && codespeed_opt="--codespeed" + + run_dirs "$@" + + if test -z "$GIT_PERF_SEND_TO_CODESPEED" + then + ./aggregate.perl $codespeed_opt "$@" + else + json_res_file="test-results/$GIT_PERF_SUBSECTION/aggregate.json" + ./aggregate.perl --codespeed "$@" | tee "$json_res_file" + send_data_url="$GIT_PERF_SEND_TO_CODESPEED/result/add/json/" + curl -v --request POST --data-urlencode "json=$(cat "$json_res_file")" "$send_data_url" + fi +} + +get_var_from_env_or_config "GIT_PERF_CODESPEED_OUTPUT" "perf" "codespeedOutput" "--bool" +get_var_from_env_or_config "GIT_PERF_SEND_TO_CODESPEED" "perf" "sendToCodespeed" cd "$(dirname $0)" . ../../GIT-BUILD-OPTIONS -if test $# = 0 -o "$1" = -- -o -f "$1"; then - set -- . "$@" +mkdir -p test-results +get_subsections "perf" >test-results/run_subsections.names + +if test $(wc -l <test-results/run_subsections.names) -eq 0 +then + if test -n "$GIT_PERF_SUBSECTION" + then + if test -n "$GIT_PERF_CONFIG_FILE" + then + die "no subsections are defined in config file '$GIT_PERF_CONFIG_FILE'" + else + die "subsection '$GIT_PERF_SUBSECTION' defined without a config file" + fi + fi + ( + run_subsection "$@" + ) +elif test -n "$GIT_PERF_SUBSECTION" +then + egrep "^$GIT_PERF_SUBSECTION\$" test-results/run_subsections.names >/dev/null || + die "subsection '$GIT_PERF_SUBSECTION' not found in '$GIT_PERF_CONFIG_FILE'" + + egrep "^$GIT_PERF_SUBSECTION\$" test-results/run_subsections.names | while read -r subsec + do + ( + GIT_PERF_SUBSECTION="$subsec" + export GIT_PERF_SUBSECTION + echo "======== Run for subsection '$GIT_PERF_SUBSECTION' ========" + run_subsection "$@" + ) + done +else + while read -r subsec + do + ( + GIT_PERF_SUBSECTION="$subsec" + export GIT_PERF_SUBSECTION + echo "======== Run for subsection '$GIT_PERF_SUBSECTION' ========" + run_subsection "$@" + ) + done <test-results/run_subsections.names fi -run_dirs "$@" -./aggregate.perl "$@" diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 1aa5093f36..7fd87dd544 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -20,6 +20,31 @@ modification *should* take notice and update the test vectors here. . ./test-lib.sh +try_local_x () { + local x="local" && + echo "$x" +} + +# This test is an experiment to check whether any Git users are using +# Shells that don't support the "local" keyword. "local" is not +# POSIX-standard, but it is very widely supported by POSIX-compliant +# shells, and if it doesn't cause problems for people, we would like +# to be able to use it in Git code. +# +# For now, this is the only test that requires "local". If your shell +# fails this test, you can ignore the failure, but please report the +# problem to the Git mailing list <git@vger.kernel.org>, as it might +# convince us to continue avoiding the use of "local". +test_expect_success 'verify that the running shell supports "local"' ' + x="notlocal" && + echo "local" >expected1 && + try_local_x >actual1 && + test_cmp expected1 actual1 && + echo "notlocal" >expected2 && + echo "$x" >actual2 && + test_cmp expected2 actual2 +' + ################################################################ # git init has been done in an empty repository. # make sure it is empty. diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 86c1a51654..c413bff9cf 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -453,4 +453,16 @@ test_expect_success 're-init from a linked worktree' ' ) ' +test_expect_success MINGW 'redirect std handles' ' + GIT_REDIRECT_STDOUT=output.txt git rev-parse --git-dir && + test .git = "$(cat output.txt)" && + test -z "$(GIT_REDIRECT_STDOUT=off git rev-parse --git-dir)" && + test_must_fail env \ + GIT_REDIRECT_STDOUT=output.txt \ + GIT_REDIRECT_STDERR="2>&1" \ + git rev-parse --git-dir --verify refs/invalid && + printf ".git\nfatal: Needed a single revision\n" >expect && + test_cmp expect output.txt +' + test_done diff --git a/t/t0002-gitfile.sh b/t/t0002-gitfile.sh index 9670e8cbe6..3691023d51 100755 --- a/t/t0002-gitfile.sh +++ b/t/t0002-gitfile.sh @@ -10,15 +10,6 @@ objpath() { echo "$1" | sed -e 's|\(..\)|\1/|' } -objck() { - p=$(objpath "$1") - if test ! -f "$REAL/objects/$p" - then - echo "Object not found: $REAL/objects/$p" - false - fi -} - test_expect_success 'initial setup' ' REAL="$(pwd)/.real" && mv .git "$REAL" @@ -26,30 +17,14 @@ test_expect_success 'initial setup' ' test_expect_success 'bad setup: invalid .git file format' ' echo "gitdir $REAL" >.git && - if git rev-parse 2>.err - then - echo "git rev-parse accepted an invalid .git file" - false - fi && - if ! grep "Invalid gitfile format" .err - then - echo "git rev-parse returned wrong error" - false - fi + test_must_fail git rev-parse 2>.err && + test_i18ngrep "invalid gitfile format" .err ' test_expect_success 'bad setup: invalid .git file path' ' echo "gitdir: $REAL.not" >.git && - if git rev-parse 2>.err - then - echo "git rev-parse accepted an invalid .git file path" - false - fi && - if ! grep "Not a git repository" .err - then - echo "git rev-parse returned wrong error" - false - fi + test_must_fail git rev-parse 2>.err && + test_i18ngrep "not a git repository" .err ' test_expect_success 'final setup + check rev-parse --git-dir' ' @@ -60,7 +35,7 @@ test_expect_success 'final setup + check rev-parse --git-dir' ' test_expect_success 'check hash-object' ' echo "foo" >bar && SHA=$(cat bar | git hash-object -w --stdin) && - objck $SHA + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check cat-file' ' @@ -69,29 +44,21 @@ test_expect_success 'check cat-file' ' ' test_expect_success 'check update-index' ' - if test -f "$REAL/index" - then - echo "Hmm, $REAL/index exists?" - false - fi && + test_path_is_missing "$REAL/index" && rm -f "$REAL/objects/$(objpath $SHA)" && git update-index --add bar && - if ! test -f "$REAL/index" - then - echo "$REAL/index not found" - false - fi && - objck $SHA + test_path_is_file "$REAL/index" && + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check write-tree' ' SHA=$(git write-tree) && - objck $SHA + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check commit-tree' ' SHA=$(echo "commit bar" | git commit-tree $SHA) && - objck $SHA + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check rev-list' ' diff --git a/t/t0005-signals.sh b/t/t0005-signals.sh index 46042f1f13..4c214bd11c 100755 --- a/t/t0005-signals.sh +++ b/t/t0005-signals.sh @@ -10,7 +10,7 @@ one EOF test_expect_success 'sigchain works' ' - { test-sigchain >actual; ret=$?; } && + { test-tool sigchain >actual; ret=$?; } && { # Signal death by raise() on Windows acts like exit(3), # regardless of the signal number. So we must allow that @@ -24,7 +24,7 @@ test_expect_success 'sigchain works' ' test_expect_success !MINGW 'signals are propagated using shell convention' ' # we use exec here to avoid any sub-shell interpretation # of the exit code - git config alias.sigterm "!exec test-sigchain" && + git config alias.sigterm "!exec test-tool sigchain" && test_expect_code 143 git sigterm ' @@ -36,7 +36,7 @@ large_git () { } test_expect_success 'create blob' ' - test-genrandom foo 16384 >file && + test-tool genrandom foo 16384 >file && git add file ' diff --git a/t/t0006-date.sh b/t/t0006-date.sh index 7ac9466d50..64ff86df8e 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -10,7 +10,7 @@ check_relative() { t=$(($TEST_DATE_NOW - $1)) echo "$t -> $2" >expect test_expect_${3:-success} "relative date ($2)" " - test-date relative $t >actual && + test-tool date relative $t >actual && test_i18ncmp expect actual " } @@ -35,7 +35,7 @@ check_show () { zone=$5 test_expect_success $prereqs "show date ($format:$time)" ' echo "$time -> $expect" >expect && - TZ=${zone:-$TZ} test-date show:"$format" "$time" >actual && + TZ=${zone:-$TZ} test-tool date show:"$format" "$time" >actual && test_cmp expect actual ' } @@ -71,7 +71,7 @@ check_show iso-local "$FUTURE" "2152-06-19 22:24:56 +0000" TIME_IS_64BIT,TIME_T_ check_parse() { echo "$1 -> $2" >expect test_expect_${4:-success} "parse date ($1${3:+ TZ=$3})" " - TZ=${3:-$TZ} test-date parse '$1' >actual && + TZ=${3:-$TZ} test-tool date parse '$1' >actual && test_cmp expect actual " } @@ -92,7 +92,7 @@ check_parse '2008-02-14 20:30:45' '2008-02-14 20:30:45 -0500' EST5 check_approxidate() { echo "$1 -> $2 +0000" >expect test_expect_${3:-success} "parse approxidate ($1)" " - test-date approxidate '$1' >actual && + test-tool date approxidate '$1' >actual && test_cmp expect actual " } diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index d27f438bf4..c03f155a35 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -307,7 +307,7 @@ test_expect_success_multi 'needs work tree' '' ' cd .git && test_check_ignore "foo" 128 ) && - stderr_contains "fatal: This operation must be run in a work tree" + stderr_contains "fatal: this operation must be run in a work tree" ' ############################################################################ @@ -775,6 +775,26 @@ test_expect_success PIPE 'streaming support for --stdin' ' echo "$response" | grep "^:: two" ' +test_expect_success 'existing file and directory' ' + test_when_finished "rm one" && + test_when_finished "rmdir top-level-dir" && + >one && + mkdir top-level-dir && + git check-ignore one top-level-dir >actual && + grep one actual && + grep top-level-dir actual +' + +test_expect_success 'existing directory and file' ' + test_when_finished "rm one" && + test_when_finished "rmdir top-level-dir" && + >one && + mkdir top-level-dir && + git check-ignore top-level-dir one >actual && + grep one actual && + grep top-level-dir actual +' + ############################################################################ # # test whitespace handling diff --git a/t/t0009-prio-queue.sh b/t/t0009-prio-queue.sh index 94045c3fad..e56dfce668 100755 --- a/t/t0009-prio-queue.sh +++ b/t/t0009-prio-queue.sh @@ -17,7 +17,7 @@ cat >expect <<'EOF' 10 EOF test_expect_success 'basic ordering' ' - test-prio-queue 2 6 3 10 9 5 7 4 5 8 1 dump >actual && + test-tool prio-queue 2 6 3 10 9 5 7 4 5 8 1 dump >actual && test_cmp expect actual ' @@ -30,7 +30,7 @@ cat >expect <<'EOF' 6 EOF test_expect_success 'mixed put and get' ' - test-prio-queue 6 2 4 get 5 3 get get 1 dump >actual && + test-tool prio-queue 6 2 4 get 5 3 get get 1 dump >actual && test_cmp expect actual ' @@ -43,7 +43,7 @@ NULL NULL EOF test_expect_success 'notice empty queue' ' - test-prio-queue 1 2 get get get 1 2 get get get >actual && + test-tool prio-queue 1 2 get get get 1 2 get get get >actual && test_cmp expect actual ' diff --git a/t/t0011-hashmap.sh b/t/t0011-hashmap.sh index 9c217d948c..3f1f505e89 100755 --- a/t/t0011-hashmap.sh +++ b/t/t0011-hashmap.sh @@ -4,7 +4,7 @@ test_description='test hashmap and string hash functions' . ./test-lib.sh test_hashmap() { - echo "$1" | test-hashmap $3 > actual && + echo "$1" | test-tool hashmap $3 > actual && echo "$2" > expect && test_cmp expect actual } @@ -232,7 +232,7 @@ test_expect_success 'grow / shrink' ' echo value40 >> expect && echo size >> in && echo 64 39 >> expect && - cat in | test-hashmap > out && + cat in | test-tool hashmap > out && test_cmp expect out ' diff --git a/t/t0013-sha1dc.sh b/t/t0013-sha1dc.sh index 6d655cb161..419f31a8f7 100755 --- a/t/t0013-sha1dc.sh +++ b/t/t0013-sha1dc.sh @@ -11,7 +11,7 @@ then fi test_expect_success 'test-sha1 detects shattered pdf' ' - test_must_fail test-sha1 <"$TEST_DATA/shattered-1.pdf" 2>err && + test_must_fail test-tool sha1 <"$TEST_DATA/shattered-1.pdf" 2>err && test_i18ngrep collision err && grep 38762cf7f55934b34d179ae6a4c80cadccbb7f0a err ' diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index 46f8e583c3..9479a4aaab 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -19,7 +19,7 @@ write_script rot13-filter.pl "$PERL_PATH" \ generate_random_characters () { LEN=$1 NAME=$2 - test-genrandom some-seed $LEN | + test-tool genrandom some-seed $LEN | perl -pe "s/./chr((ord($&) % 26) + ord('a'))/sge" >"$TEST_ROOT/$NAME" } @@ -267,7 +267,7 @@ test_expect_success 'filtering large input to small output should use little mem ' test_expect_success 'filter that does not read is fine' ' - test-genrandom foo $((128 * 1024 + 1)) >big && + test-tool genrandom foo $((128 * 1024 + 1)) >big && echo "big filter=epipe" >.gitattributes && test_config filter.epipe.clean "echo xyzzy" && git add big && diff --git a/t/t0021/rot13-filter.pl b/t/t0021/rot13-filter.pl index ad685d92f8..470107248e 100644 --- a/t/t0021/rot13-filter.pl +++ b/t/t0021/rot13-filter.pl @@ -30,9 +30,27 @@ # to the "list_available_blobs" response. # +use 5.008; +sub gitperllib { + # Git assumes that all path lists are Unix-y colon-separated ones. But + # when the Git for Windows executes the test suite, its MSYS2 Bash + # calls git.exe, and colon-separated path lists are converted into + # Windows-y semicolon-separated lists of *Windows* paths (which + # naturally contain a colon after the drive letter, so splitting by + # colons simply does not cut it). + # + # Detect semicolon-separated path list and handle them appropriately. + + if ($ENV{GITPERLLIB} =~ /;/) { + return split(/;/, $ENV{GITPERLLIB}); + } + return split(/:/, $ENV{GITPERLLIB}); +} +use lib (gitperllib()); use strict; use warnings; use IO::File; +use Git::Packet; my $MAX_PACKET_CONTENT_SIZE = 65516; my $log_file = shift @ARGV; @@ -55,89 +73,30 @@ sub rot13 { return $str; } -sub packet_bin_read { - my $buffer; - my $bytes_read = read STDIN, $buffer, 4; - if ( $bytes_read == 0 ) { - # EOF - Git stopped talking to us! - print $debug "STOP\n"; - exit(); - } - elsif ( $bytes_read != 4 ) { - die "invalid packet: '$buffer'"; - } - my $pkt_size = hex($buffer); - if ( $pkt_size == 0 ) { - return ( 1, "" ); - } - elsif ( $pkt_size > 4 ) { - my $content_size = $pkt_size - 4; - $bytes_read = read STDIN, $buffer, $content_size; - if ( $bytes_read != $content_size ) { - die "invalid packet ($content_size bytes expected; $bytes_read bytes read)"; - } - return ( 0, $buffer ); - } - else { - die "invalid packet size: $pkt_size"; - } -} - -sub packet_txt_read { - my ( $res, $buf ) = packet_bin_read(); - unless ( $buf eq '' or $buf =~ s/\n$// ) { - die "A non-binary line MUST be terminated by an LF."; - } - return ( $res, $buf ); -} - -sub packet_bin_write { - my $buf = shift; - print STDOUT sprintf( "%04x", length($buf) + 4 ); - print STDOUT $buf; - STDOUT->flush(); -} - -sub packet_txt_write { - packet_bin_write( $_[0] . "\n" ); -} - -sub packet_flush { - print STDOUT sprintf( "%04x", 0 ); - STDOUT->flush(); -} - print $debug "START\n"; $debug->flush(); -( packet_txt_read() eq ( 0, "git-filter-client" ) ) || die "bad initialize"; -( packet_txt_read() eq ( 0, "version=2" ) ) || die "bad version"; -( packet_bin_read() eq ( 1, "" ) ) || die "bad version end"; - -packet_txt_write("git-filter-server"); -packet_txt_write("version=2"); -packet_flush(); +packet_initialize("git-filter", 2); -( packet_txt_read() eq ( 0, "capability=clean" ) ) || die "bad capability"; -( packet_txt_read() eq ( 0, "capability=smudge" ) ) || die "bad capability"; -( packet_txt_read() eq ( 0, "capability=delay" ) ) || die "bad capability"; -( packet_bin_read() eq ( 1, "" ) ) || die "bad capability end"; +my %remote_caps = packet_read_and_check_capabilities("clean", "smudge", "delay"); +packet_check_and_write_capabilities(\%remote_caps, @capabilities); -foreach (@capabilities) { - packet_txt_write( "capability=" . $_ ); -} -packet_flush(); print $debug "init handshake complete\n"; $debug->flush(); while (1) { - my ( $command ) = packet_txt_read() =~ /^command=(.+)$/; + my ( $res, $command ) = packet_key_val_read("command"); + if ( $res == -1 ) { + print $debug "STOP\n"; + exit(); + } print $debug "IN: $command"; $debug->flush(); if ( $command eq "list_available_blobs" ) { # Flush - packet_bin_read(); + packet_compare_lists([1, ""], packet_bin_read()) || + die "bad list_available_blobs end"; foreach my $pathname ( sort keys %DELAY ) { if ( $DELAY{$pathname}{"requested"} >= 1 ) { @@ -161,16 +120,14 @@ while (1) { $debug->flush(); packet_txt_write("status=success"); packet_flush(); - } - else { - my ( $pathname ) = packet_txt_read() =~ /^pathname=(.+)$/; + } else { + my ( $res, $pathname ) = packet_key_val_read("pathname"); + if ( $res == -1 ) { + die "unexpected EOF while expecting pathname"; + } print $debug " $pathname"; $debug->flush(); - if ( $pathname eq "" ) { - die "bad pathname '$pathname'"; - } - # Read until flush my ( $done, $buffer ) = packet_txt_read(); while ( $buffer ne '' ) { @@ -184,6 +141,9 @@ while (1) { ( $done, $buffer ) = packet_txt_read(); } + if ( $done == -1 ) { + die "unexpected EOF after pathname '$pathname'"; + } my $input = ""; { @@ -194,6 +154,9 @@ while (1) { ( $done, $buffer ) = packet_bin_read(); $input .= $buffer; } + if ( $done == -1 ) { + die "unexpected EOF while reading input for '$pathname'"; + } print $debug " " . length($input) . " [OK] -- "; $debug->flush(); } @@ -201,17 +164,13 @@ while (1) { my $output; if ( exists $DELAY{$pathname} and exists $DELAY{$pathname}{"output"} ) { $output = $DELAY{$pathname}{"output"} - } - elsif ( $pathname eq "error.r" or $pathname eq "abort.r" ) { + } elsif ( $pathname eq "error.r" or $pathname eq "abort.r" ) { $output = ""; - } - elsif ( $command eq "clean" and grep( /^clean$/, @capabilities ) ) { + } elsif ( $command eq "clean" and grep( /^clean$/, @capabilities ) ) { $output = rot13($input); - } - elsif ( $command eq "smudge" and grep( /^smudge$/, @capabilities ) ) { + } elsif ( $command eq "smudge" and grep( /^smudge$/, @capabilities ) ) { $output = rot13($input); - } - else { + } else { die "bad command '$command'"; } @@ -220,25 +179,21 @@ while (1) { $debug->flush(); packet_txt_write("status=error"); packet_flush(); - } - elsif ( $pathname eq "abort.r" ) { + } elsif ( $pathname eq "abort.r" ) { print $debug "[ABORT]\n"; $debug->flush(); packet_txt_write("status=abort"); packet_flush(); - } - elsif ( $command eq "smudge" and + } elsif ( $command eq "smudge" and exists $DELAY{$pathname} and - $DELAY{$pathname}{"requested"} == 1 - ) { + $DELAY{$pathname}{"requested"} == 1 ) { print $debug "[DELAYED]\n"; $debug->flush(); packet_txt_write("status=delayed"); packet_flush(); $DELAY{$pathname}{"requested"} = 2; $DELAY{$pathname}{"output"} = $output; - } - else { + } else { packet_txt_write("status=success"); packet_flush(); @@ -258,8 +213,7 @@ while (1) { print $debug "."; if ( length($output) > $MAX_PACKET_CONTENT_SIZE ) { $output = substr( $output, $MAX_PACKET_CONTENT_SIZE ); - } - else { + } else { $output = ""; } } diff --git a/t/t0025-crlf-renormalize.sh b/t/t0025-crlf-renormalize.sh new file mode 100755 index 0000000000..9d9e02a211 --- /dev/null +++ b/t/t0025-crlf-renormalize.sh @@ -0,0 +1,30 @@ +#!/bin/sh + +test_description='CRLF renormalization' + +. ./test-lib.sh + +test_expect_success setup ' + git config core.autocrlf false && + printf "LINEONE\nLINETWO\nLINETHREE\n" >LF.txt && + printf "LINEONE\r\nLINETWO\r\nLINETHREE\r\n" >CRLF.txt && + printf "LINEONE\r\nLINETWO\nLINETHREE\n" >CRLF_mix_LF.txt && + git add . && + git commit -m initial +' + +test_expect_success 'renormalize CRLF in repo' ' + echo "*.txt text=auto" >.gitattributes && + git add --renormalize "*.txt" && + cat >expect <<-\EOF && + i/lf w/crlf attr/text=auto CRLF.txt + i/lf w/lf attr/text=auto LF.txt + i/lf w/mixed attr/text=auto CRLF_mix_LF.txt + EOF + git ls-files --eol | + sed -e "s/ / /g" -e "s/ */ /g" | + sort >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh index deb3ae7813..beb5927f77 100755 --- a/t/t0027-auto-crlf.sh +++ b/t/t0027-auto-crlf.sh @@ -43,19 +43,31 @@ create_gitattributes () { } >.gitattributes } -create_NNO_files () { +# Create 2 sets of files: +# The NNO files are "Not NOrmalized in the repo. We use CRLF_mix_LF and store +# it under different names for the different test cases, see ${pfx} +# Depending on .gitattributes they are normalized at the next commit (or not) +# The MIX files have different contents in the repo. +# Depending on its contents, the "new safer autocrlf" may kick in. +create_NNO_MIX_files () { for crlf in false true input do for attr in "" auto text -text do for aeol in "" lf crlf do - pfx=NNO_attr_${attr}_aeol_${aeol}_${crlf} + pfx=NNO_attr_${attr}_aeol_${aeol}_${crlf} && cp CRLF_mix_LF ${pfx}_LF.txt && cp CRLF_mix_LF ${pfx}_CRLF.txt && cp CRLF_mix_LF ${pfx}_CRLF_mix_LF.txt && cp CRLF_mix_LF ${pfx}_LF_mix_CR.txt && - cp CRLF_mix_LF ${pfx}_CRLF_nul.txt + cp CRLF_mix_LF ${pfx}_CRLF_nul.txt && + pfx=MIX_attr_${attr}_aeol_${aeol}_${crlf} && + cp LF ${pfx}_LF.txt && + cp CRLF ${pfx}_CRLF.txt && + cp CRLF_mix_LF ${pfx}_CRLF_mix_LF.txt && + cp LF_mix_CR ${pfx}_LF_mix_CR.txt && + cp CRLF_nul ${pfx}_CRLF_nul.txt done done done @@ -136,6 +148,49 @@ commit_chk_wrnNNO () { ' } +# Commit a file with mixed line endings on top of different files +# in the index. Check for warnings +commit_MIX_chkwrn () { + attr=$1 ; shift + aeol=$1 ; shift + crlf=$1 ; shift + lfwarn=$1 ; shift + crlfwarn=$1 ; shift + lfmixcrlf=$1 ; shift + lfmixcr=$1 ; shift + crlfnul=$1 ; shift + pfx=MIX_attr_${attr}_aeol_${aeol}_${crlf} + #Commit file with CLRF_mix_LF on top of existing file + create_gitattributes "$attr" $aeol && + for f in LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + do + fname=${pfx}_$f.txt && + cp CRLF_mix_LF $fname && + printf Z >>"$fname" && + git -c core.autocrlf=$crlf add $fname 2>"${pfx}_$f.err" + done + + test_expect_success "commit file with mixed EOL onto LF crlf=$crlf attr=$attr" ' + check_warning "$lfwarn" ${pfx}_LF.err + ' + test_expect_success "commit file with mixed EOL onto CLRF attr=$attr aeol=$aeol crlf=$crlf" ' + check_warning "$crlfwarn" ${pfx}_CRLF.err + ' + + test_expect_success "commit file with mixed EOL onto CRLF_mix_LF attr=$attr aeol=$aeol crlf=$crlf" ' + check_warning "$lfmixcrlf" ${pfx}_CRLF_mix_LF.err + ' + + test_expect_success "commit file with mixed EOL onto LF_mix_cr attr=$attr aeol=$aeol crlf=$crlf " ' + check_warning "$lfmixcr" ${pfx}_LF_mix_CR.err + ' + + test_expect_success "commit file with mixed EOL onto CRLF_nul attr=$attr aeol=$aeol crlf=$crlf" ' + check_warning "$crlfnul" ${pfx}_CRLF_nul.err + ' +} + + stats_ascii () { case "$1" in LF) @@ -315,7 +370,7 @@ test_expect_success 'setup master' ' echo >.gitattributes && git checkout -b master && git add .gitattributes && - git commit -m "add .gitattributes" "" && + git commit -m "add .gitattributes" . && printf "\$Id: 0000000000000000000000000000000000000000 \$\nLINEONE\nLINETWO\nLINETHREE" >LF && printf "\$Id: 0000000000000000000000000000000000000000 \$\r\nLINEONE\r\nLINETWO\r\nLINETHREE" >CRLF && printf "\$Id: 0000000000000000000000000000000000000000 \$\nLINEONE\r\nLINETWO\nLINETHREE" >CRLF_mix_LF && @@ -323,8 +378,8 @@ test_expect_success 'setup master' ' printf "\$Id: 0000000000000000000000000000000000000000 \$\r\nLINEONE\r\nLINETWO\rLINETHREE" >CRLF_mix_CR && printf "\$Id: 0000000000000000000000000000000000000000 \$\r\nLINEONEQ\r\nLINETWO\r\nLINETHREE" | q_to_nul >CRLF_nul && printf "\$Id: 0000000000000000000000000000000000000000 \$\nLINEONEQ\nLINETWO\nLINETHREE" | q_to_nul >LF_nul && - create_NNO_files CRLF_mix_LF CRLF_mix_LF CRLF_mix_LF CRLF_mix_LF CRLF_mix_LF && - git -c core.autocrlf=false add NNO_*.txt && + create_NNO_MIX_files && + git -c core.autocrlf=false add NNO_*.txt MIX_*.txt && git commit -m "mixed line endings" && test_tick ' @@ -385,6 +440,18 @@ test_expect_success 'commit files attr=crlf' ' commit_check_warn input "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" ' +# Commit "CRLFmixLF" on top of these files already in the repo: +# mixed mixed mixed mixed mixed +# onto onto onto onto onto +# attr LF CRLF CRLFmixLF LF_mix_CR CRLFNUL +commit_MIX_chkwrn "" "" false "" "" "" "" "" +commit_MIX_chkwrn "" "" true "LF_CRLF" "" "" "LF_CRLF" "LF_CRLF" +commit_MIX_chkwrn "" "" input "CRLF_LF" "" "" "CRLF_LF" "CRLF_LF" + +commit_MIX_chkwrn "auto" "" false "$WAMIX" "" "" "$WAMIX" "$WAMIX" +commit_MIX_chkwrn "auto" "" true "LF_CRLF" "" "" "LF_CRLF" "LF_CRLF" +commit_MIX_chkwrn "auto" "" input "CRLF_LF" "" "" "CRLF_LF" "CRLF_LF" + # attr LF CRLF CRLFmixLF LF_mix_CR CRLFNUL commit_chk_wrnNNO "" "" false "" "" "" "" "" commit_chk_wrnNNO "" "" true LF_CRLF "" "" "" "" diff --git a/t/t0028-working-tree-encoding.sh b/t/t0028-working-tree-encoding.sh new file mode 100755 index 0000000000..12b8eb963a --- /dev/null +++ b/t/t0028-working-tree-encoding.sh @@ -0,0 +1,245 @@ +#!/bin/sh + +test_description='working-tree-encoding conversion via gitattributes' + +. ./test-lib.sh + +GIT_TRACE_WORKING_TREE_ENCODING=1 && export GIT_TRACE_WORKING_TREE_ENCODING + +test_expect_success 'setup test files' ' + git config core.eol lf && + + text="hallo there!\ncan you read me?" && + echo "*.utf16 text working-tree-encoding=utf-16" >.gitattributes && + printf "$text" >test.utf8.raw && + printf "$text" | iconv -f UTF-8 -t UTF-16 >test.utf16.raw && + printf "$text" | iconv -f UTF-8 -t UTF-32 >test.utf32.raw && + + # Line ending tests + printf "one\ntwo\nthree\n" >lf.utf8.raw && + printf "one\r\ntwo\r\nthree\r\n" >crlf.utf8.raw && + + # BOM tests + printf "\0a\0b\0c" >nobom.utf16be.raw && + printf "a\0b\0c\0" >nobom.utf16le.raw && + printf "\376\777\0a\0b\0c" >bebom.utf16be.raw && + printf "\777\376a\0b\0c\0" >lebom.utf16le.raw && + printf "\0\0\0a\0\0\0b\0\0\0c" >nobom.utf32be.raw && + printf "a\0\0\0b\0\0\0c\0\0\0" >nobom.utf32le.raw && + printf "\0\0\376\777\0\0\0a\0\0\0b\0\0\0c" >bebom.utf32be.raw && + printf "\777\376\0\0a\0\0\0b\0\0\0c\0\0\0" >lebom.utf32le.raw && + + # Add only UTF-16 file, we will add the UTF-32 file later + cp test.utf16.raw test.utf16 && + cp test.utf32.raw test.utf32 && + git add .gitattributes test.utf16 && + git commit -m initial +' + +test_expect_success 'ensure UTF-8 is stored in Git' ' + test_when_finished "rm -f test.utf16.git" && + + git cat-file -p :test.utf16 >test.utf16.git && + test_cmp_bin test.utf8.raw test.utf16.git +' + +test_expect_success 're-encode to UTF-16 on checkout' ' + test_when_finished "rm -f test.utf16.raw" && + + rm test.utf16 && + git checkout test.utf16 && + test_cmp_bin test.utf16.raw test.utf16 +' + +test_expect_success 'check $GIT_DIR/info/attributes support' ' + test_when_finished "rm -f test.utf32.git" && + test_when_finished "git reset --hard HEAD" && + + echo "*.utf32 text working-tree-encoding=utf-32" >.git/info/attributes && + git add test.utf32 && + + git cat-file -p :test.utf32 >test.utf32.git && + test_cmp_bin test.utf8.raw test.utf32.git +' + +for i in 16 32 +do + test_expect_success "check prohibited UTF-${i} BOM" ' + test_when_finished "git reset --hard HEAD" && + + echo "*.utf${i}be text working-tree-encoding=utf-${i}be" >>.gitattributes && + echo "*.utf${i}le text working-tree-encoding=utf-${i}LE" >>.gitattributes && + + # Here we add a UTF-16 (resp. UTF-32) files with BOM (big/little-endian) + # but we tell Git to treat it as UTF-16BE/UTF-16LE (resp. UTF-32). + # In these cases the BOM is prohibited. + cp bebom.utf${i}be.raw bebom.utf${i}be && + test_must_fail git add bebom.utf${i}be 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}be" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out && + + cp lebom.utf${i}le.raw lebom.utf${i}be && + test_must_fail git add lebom.utf${i}be 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}be" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out && + + cp bebom.utf${i}be.raw bebom.utf${i}le && + test_must_fail git add bebom.utf${i}le 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}LE" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out && + + cp lebom.utf${i}le.raw lebom.utf${i}le && + test_must_fail git add lebom.utf${i}le 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}LE" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out + ' + + test_expect_success "check required UTF-${i} BOM" ' + test_when_finished "git reset --hard HEAD" && + + echo "*.utf${i} text working-tree-encoding=utf-${i}" >>.gitattributes && + + cp nobom.utf${i}be.raw nobom.utf${i} && + test_must_fail git add nobom.utf${i} 2>err.out && + test_i18ngrep "fatal: BOM is required .* utf-${i}" err.out && + test_i18ngrep "use UTF-${i}BE or UTF-${i}LE" err.out && + + cp nobom.utf${i}le.raw nobom.utf${i} && + test_must_fail git add nobom.utf${i} 2>err.out && + test_i18ngrep "fatal: BOM is required .* utf-${i}" err.out && + test_i18ngrep "use UTF-${i}BE or UTF-${i}LE" err.out + ' + + test_expect_success "eol conversion for UTF-${i} encoded files on checkout" ' + test_when_finished "rm -f crlf.utf${i}.raw lf.utf${i}.raw" && + test_when_finished "git reset --hard HEAD^" && + + cat lf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >lf.utf${i}.raw && + cat crlf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >crlf.utf${i}.raw && + cp crlf.utf${i}.raw eol.utf${i} && + + cat >expectIndexLF <<-EOF && + i/lf w/-text attr/text eol.utf${i} + EOF + + git add eol.utf${i} && + git commit -m eol && + + # UTF-${i} with CRLF (Windows line endings) + rm eol.utf${i} && + git -c core.eol=crlf checkout eol.utf${i} && + test_cmp_bin crlf.utf${i}.raw eol.utf${i} && + + # Although the file has CRLF in the working tree, + # ensure LF in the index + git ls-files --eol eol.utf${i} >actual && + test_cmp expectIndexLF actual && + + # UTF-${i} with LF (Unix line endings) + rm eol.utf${i} && + git -c core.eol=lf checkout eol.utf${i} && + test_cmp_bin lf.utf${i}.raw eol.utf${i} && + + # The file LF in the working tree, ensure LF in the index + git ls-files --eol eol.utf${i} >actual && + test_cmp expectIndexLF actual + ' +done + +test_expect_success 'check unsupported encodings' ' + test_when_finished "git reset --hard HEAD" && + + echo "*.set text working-tree-encoding" >.gitattributes && + printf "set" >t.set && + test_must_fail git add t.set 2>err.out && + test_i18ngrep "true/false are no valid working-tree-encodings" err.out && + + echo "*.unset text -working-tree-encoding" >.gitattributes && + printf "unset" >t.unset && + git add t.unset && + + echo "*.empty text working-tree-encoding=" >.gitattributes && + printf "empty" >t.empty && + git add t.empty && + + echo "*.garbage text working-tree-encoding=garbage" >.gitattributes && + printf "garbage" >t.garbage && + test_must_fail git add t.garbage 2>err.out && + test_i18ngrep "failed to encode" err.out +' + +test_expect_success 'error if encoding round trip is not the same during refresh' ' + BEFORE_STATE=$(git rev-parse HEAD) && + test_when_finished "git reset --hard $BEFORE_STATE" && + + # Add and commit a UTF-16 file but skip the "working-tree-encoding" + # filter. Consequently, the in-repo representation is UTF-16 and not + # UTF-8. This simulates a Git version that has no working tree encoding + # support. + echo "*.utf16le text working-tree-encoding=utf-16le" >.gitattributes && + echo "hallo" >nonsense.utf16le && + TEST_HASH=$(git hash-object --no-filters -w nonsense.utf16le) && + git update-index --add --cacheinfo 100644 $TEST_HASH nonsense.utf16le && + COMMIT=$(git commit-tree -p $(git rev-parse HEAD) -m "plain commit" $(git write-tree)) && + git update-ref refs/heads/master $COMMIT && + + test_must_fail git checkout HEAD^ 2>err.out && + test_i18ngrep "error: .* overwritten by checkout:" err.out +' + +test_expect_success 'error if encoding garbage is already in Git' ' + BEFORE_STATE=$(git rev-parse HEAD) && + test_when_finished "git reset --hard $BEFORE_STATE" && + + # Skip the UTF-16 filter for the added file + # This simulates a Git version that has no checkoutEncoding support + cp nobom.utf16be.raw nonsense.utf16 && + TEST_HASH=$(git hash-object --no-filters -w nonsense.utf16) && + git update-index --add --cacheinfo 100644 $TEST_HASH nonsense.utf16 && + COMMIT=$(git commit-tree -p $(git rev-parse HEAD) -m "plain commit" $(git write-tree)) && + git update-ref refs/heads/master $COMMIT && + + git diff 2>err.out && + test_i18ngrep "error: BOM is required" err.out +' + +test_expect_success 'check roundtrip encoding' ' + test_when_finished "rm -f roundtrip.shift roundtrip.utf16" && + test_when_finished "git reset --hard HEAD" && + + text="hallo there!\nroundtrip test here!" && + printf "$text" | iconv -f UTF-8 -t SHIFT-JIS >roundtrip.shift && + printf "$text" | iconv -f UTF-8 -t UTF-16 >roundtrip.utf16 && + echo "*.shift text working-tree-encoding=SHIFT-JIS" >>.gitattributes && + + # SHIFT-JIS encoded files are round-trip checked by default... + GIT_TRACE=1 git add .gitattributes roundtrip.shift 2>&1 | + grep "Checking roundtrip encoding for SHIFT-JIS" && + git reset && + + # ... unless we overwrite the Git config! + ! GIT_TRACE=1 git -c core.checkRoundtripEncoding=garbage \ + add .gitattributes roundtrip.shift 2>&1 | + grep "Checking roundtrip encoding for SHIFT-JIS" && + git reset && + + # UTF-16 encoded files should not be round-trip checked by default... + ! GIT_TRACE=1 git add roundtrip.utf16 2>&1 | + grep "Checking roundtrip encoding for UTF-16" && + git reset && + + # ... unless we tell Git to check it! + GIT_TRACE=1 git -c core.checkRoundtripEncoding="UTF-16, UTF-32" \ + add roundtrip.utf16 2>&1 | + grep "Checking roundtrip encoding for utf-16" && + git reset && + + # ... unless we tell Git to check it! + # (here we also check that the casing of the encoding is irrelevant) + GIT_TRACE=1 git -c core.checkRoundtripEncoding="UTF-32, utf-16" \ + add roundtrip.utf16 2>&1 | + grep "Checking roundtrip encoding for utf-16" && + git reset +' + +test_done diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index 74d2cd76fe..04d474c84f 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -10,6 +10,8 @@ test_description='our own option parser' cat >expect <<\EOF usage: test-parse-options <options> + A helper function for the parse-options API. + --yes get a boolean -D, --no-doubt begins with 'no-' -B, --no-fear be brave @@ -289,7 +291,7 @@ test_expect_success 'OPT_CALLBACK() and OPT_BIT() work' ' test_expect_success 'OPT_CALLBACK() and callback errors work' ' test_must_fail test-parse-options --no-length >output 2>output.err && test_i18ncmp expect output && - test_i18ncmp expect.err output.err + test_must_be_empty output.err ' cat >expect <<\EOF diff --git a/t/t0041-usage.sh b/t/t0041-usage.sh new file mode 100755 index 0000000000..5b927b76fe --- /dev/null +++ b/t/t0041-usage.sh @@ -0,0 +1,107 @@ +#!/bin/sh + +test_description='Test commands behavior when given invalid argument value' + +. ./test-lib.sh + +test_expect_success 'setup ' ' + test_commit "v1.0" +' + +test_expect_success 'tag --contains <existent_tag>' ' + git tag --contains "v1.0" >actual 2>actual.err && + grep "v1.0" actual && + test_line_count = 0 actual.err +' + +test_expect_success 'tag --contains <inexistent_tag>' ' + test_must_fail git tag --contains "notag" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'tag --no-contains <existent_tag>' ' + git tag --no-contains "v1.0" >actual 2>actual.err && + test_line_count = 0 actual && + test_line_count = 0 actual.err +' + +test_expect_success 'tag --no-contains <inexistent_tag>' ' + test_must_fail git tag --no-contains "notag" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'tag usage error' ' + test_must_fail git tag --noopt >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "usage" actual.err +' + +test_expect_success 'branch --contains <existent_commit>' ' + git branch --contains "master" >actual 2>actual.err && + test_i18ngrep "master" actual && + test_line_count = 0 actual.err +' + +test_expect_success 'branch --contains <inexistent_commit>' ' + test_must_fail git branch --no-contains "nocommit" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'branch --no-contains <existent_commit>' ' + git branch --no-contains "master" >actual 2>actual.err && + test_line_count = 0 actual && + test_line_count = 0 actual.err +' + +test_expect_success 'branch --no-contains <inexistent_commit>' ' + test_must_fail git branch --no-contains "nocommit" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'branch usage error' ' + test_must_fail git branch --noopt >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "usage" actual.err +' + +test_expect_success 'for-each-ref --contains <existent_object>' ' + git for-each-ref --contains "master" >actual 2>actual.err && + test_line_count = 2 actual && + test_line_count = 0 actual.err +' + +test_expect_success 'for-each-ref --contains <inexistent_object>' ' + test_must_fail git for-each-ref --no-contains "noobject" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'for-each-ref --no-contains <existent_object>' ' + git for-each-ref --no-contains "master" >actual 2>actual.err && + test_line_count = 0 actual && + test_line_count = 0 actual.err +' + +test_expect_success 'for-each-ref --no-contains <inexistent_object>' ' + test_must_fail git for-each-ref --no-contains "noobject" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'for-each-ref usage error' ' + test_must_fail git for-each-ref --noopt >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "usage" actual.err +' + +test_done diff --git a/t/t0050-filesystem.sh b/t/t0050-filesystem.sh index b29d749bb7..192c94eccd 100755 --- a/t/t0050-filesystem.sh +++ b/t/t0050-filesystem.sh @@ -80,7 +80,21 @@ test_expect_success 'merge (case change)' ' git merge topic ' - +test_expect_success CASE_INSENSITIVE_FS 'add directory (with different case)' ' + git reset --hard initial && + mkdir -p dir1/dir2 && + echo >dir1/dir2/a && + echo >dir1/dir2/b && + git add dir1/dir2/a && + git add dir1/DIR2/b && + git ls-files >actual && + cat >expected <<-\EOF && + camelcase + dir1/dir2/a + dir1/dir2/b + EOF + test_cmp expected actual +' test_expect_failure CASE_INSENSITIVE_FS 'add (with different case)' ' git reset --hard initial && diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index 7ea2bb515b..f46e3c4995 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -8,15 +8,15 @@ test_description='Test various path utilities' . ./test-lib.sh norm_path() { - expected=$(test-path-utils print_path "$2") + expected=$(test-tool path-utils print_path "$2") test_expect_success $3 "normalize path: $1 => $2" \ - "test \"\$(test-path-utils normalize_path_copy '$1')\" = '$expected'" + "test \"\$(test-tool path-utils normalize_path_copy '$1')\" = '$expected'" } relative_path() { - expected=$(test-path-utils print_path "$3") + expected=$(test-tool path-utils print_path "$3") test_expect_success $4 "relative path: $1 $2 => $3" \ - "test \"\$(test-path-utils relative_path '$1' '$2')\" = '$expected'" + "test \"\$(test-tool path-utils relative_path '$1' '$2')\" = '$expected'" } test_submodule_relative_url() { @@ -37,7 +37,7 @@ test_git_path() { # On Windows, we are using MSYS's bash, which mangles the paths. # Absolute paths are anchored at the MSYS installation directory, # which means that the path / accounts for this many characters: -rootoff=$(test-path-utils normalize_path_copy / | wc -c) +rootoff=$(test-tool path-utils normalize_path_copy / | wc -c) # Account for the trailing LF: if test $rootoff = 2; then rootoff= # we are on Unix @@ -46,7 +46,7 @@ else # In MSYS2, the root directory "/" is translated into a Windows # directory *with* trailing slash. Let's test for that and adjust # our expected longest ancestor length accordingly. - case "$(test-path-utils print_path /)" in + case "$(test-tool path-utils print_path /)" in */) rootslash=1;; *) rootslash=0;; esac @@ -61,7 +61,7 @@ ancestor() { expected=$(($expected+$rootoff)) fi test_expect_success "longest ancestor: $1 $2 => $expected" \ - "actual=\$(test-path-utils longest_ancestor_length '$1' '$2') && + "actual=\$(test-tool path-utils longest_ancestor_length '$1' '$2') && test \"\$actual\" = '$expected'" } @@ -77,8 +77,8 @@ case $(uname -s) in ;; esac -test_expect_success basename 'test-path-utils basename' -test_expect_success dirname 'test-path-utils dirname' +test_expect_success basename 'test-tool path-utils basename' +test_expect_success dirname 'test-tool path-utils dirname' norm_path "" "" norm_path . "" @@ -157,48 +157,48 @@ ancestor /foo/bar /foo:/bar 4 ancestor /foo/bar /bar -1 test_expect_success 'strip_path_suffix' ' - test c:/msysgit = $(test-path-utils strip_path_suffix \ + test c:/msysgit = $(test-tool path-utils strip_path_suffix \ c:/msysgit/libexec//git-core libexec/git-core) ' test_expect_success 'absolute path rejects the empty string' ' - test_must_fail test-path-utils absolute_path "" + test_must_fail test-tool path-utils absolute_path "" ' test_expect_success 'real path rejects the empty string' ' - test_must_fail test-path-utils real_path "" + test_must_fail test-tool path-utils real_path "" ' test_expect_success POSIX 'real path works on absolute paths 1' ' nopath="hopefully-absent-path" && - test "/" = "$(test-path-utils real_path "/")" && - test "/$nopath" = "$(test-path-utils real_path "/$nopath")" + test "/" = "$(test-tool path-utils real_path "/")" && + test "/$nopath" = "$(test-tool path-utils real_path "/$nopath")" ' test_expect_success 'real path works on absolute paths 2' ' nopath="hopefully-absent-path" && # Find an existing top-level directory for the remaining tests: d=$(pwd -P | sed -e "s|^\([^/]*/[^/]*\)/.*|\1|") && - test "$d" = "$(test-path-utils real_path "$d")" && - test "$d/$nopath" = "$(test-path-utils real_path "$d/$nopath")" + test "$d" = "$(test-tool path-utils real_path "$d")" && + test "$d/$nopath" = "$(test-tool path-utils real_path "$d/$nopath")" ' test_expect_success POSIX 'real path removes extra leading slashes' ' nopath="hopefully-absent-path" && - test "/" = "$(test-path-utils real_path "///")" && - test "/$nopath" = "$(test-path-utils real_path "///$nopath")" && + test "/" = "$(test-tool path-utils real_path "///")" && + test "/$nopath" = "$(test-tool path-utils real_path "///$nopath")" && # Find an existing top-level directory for the remaining tests: d=$(pwd -P | sed -e "s|^\([^/]*/[^/]*\)/.*|\1|") && - test "$d" = "$(test-path-utils real_path "//$d")" && - test "$d/$nopath" = "$(test-path-utils real_path "//$d/$nopath")" + test "$d" = "$(test-tool path-utils real_path "//$d")" && + test "$d/$nopath" = "$(test-tool path-utils real_path "//$d/$nopath")" ' test_expect_success 'real path removes other extra slashes' ' nopath="hopefully-absent-path" && # Find an existing top-level directory for the remaining tests: d=$(pwd -P | sed -e "s|^\([^/]*/[^/]*\)/.*|\1|") && - test "$d" = "$(test-path-utils real_path "$d///")" && - test "$d/$nopath" = "$(test-path-utils real_path "$d///$nopath")" + test "$d" = "$(test-tool path-utils real_path "$d///")" && + test "$d/$nopath" = "$(test-tool path-utils real_path "$d///$nopath")" ' test_expect_success SYMLINKS 'real path works on symlinks' ' @@ -209,35 +209,35 @@ test_expect_success SYMLINKS 'real path works on symlinks' ' mkdir third && dir="$(cd .git; pwd -P)" && dir2=third/../second/other/.git && - test "$dir" = "$(test-path-utils real_path $dir2)" && + test "$dir" = "$(test-tool path-utils real_path $dir2)" && file="$dir"/index && - test "$file" = "$(test-path-utils real_path $dir2/index)" && + test "$file" = "$(test-tool path-utils real_path $dir2/index)" && basename=blub && - test "$dir/$basename" = "$(cd .git && test-path-utils real_path "$basename")" && + test "$dir/$basename" = "$(cd .git && test-tool path-utils real_path "$basename")" && ln -s ../first/file .git/syml && sym="$(cd first; pwd -P)"/file && - test "$sym" = "$(test-path-utils real_path "$dir2/syml")" + test "$sym" = "$(test-tool path-utils real_path "$dir2/syml")" ' test_expect_success SYMLINKS 'prefix_path works with absolute paths to work tree symlinks' ' ln -s target symlink && - test "$(test-path-utils prefix_path prefix "$(pwd)/symlink")" = "symlink" + test "$(test-tool path-utils prefix_path prefix "$(pwd)/symlink")" = "symlink" ' test_expect_success 'prefix_path works with only absolute path to work tree' ' echo "" >expected && - test-path-utils prefix_path prefix "$(pwd)" >actual && + test-tool path-utils prefix_path prefix "$(pwd)" >actual && test_cmp expected actual ' test_expect_success 'prefix_path rejects absolute path to dir with same beginning as work tree' ' - test_must_fail test-path-utils prefix_path prefix "$(pwd)a" + test_must_fail test-tool path-utils prefix_path prefix "$(pwd)a" ' test_expect_success SYMLINKS 'prefix_path works with absolute path to a symlink to work tree having same beginning as work tree' ' git init repo && ln -s repo repolink && - test "a" = "$(cd repo && test-path-utils prefix_path prefix "$(pwd)/../repolink/a")" + test "a" = "$(cd repo && test-tool path-utils prefix_path prefix "$(pwd)/../repolink/a")" ' relative_path /foo/a/b/c/ /foo/a/b/ c/ diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index e4739170aa..c887ed5b45 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -14,13 +14,13 @@ EOF >empty test_expect_success 'start_command reports ENOENT' ' - test-run-command start-command-ENOENT ./does-not-exist + test-tool run-command start-command-ENOENT ./does-not-exist ' test_expect_success 'run_command can run a command' ' cat hello-script >hello.sh && chmod +x hello.sh && - test-run-command run-command ./hello.sh >actual 2>err && + test-tool run-command run-command ./hello.sh >actual 2>err && test_cmp hello-script actual && test_cmp empty err @@ -31,7 +31,7 @@ test_expect_success !MINGW 'run_command can run a script without a #! line' ' cat hello-script EOF chmod +x hello && - test-run-command run-command ./hello >actual 2>err && + test-tool run-command run-command ./hello >actual 2>err && test_cmp hello-script actual && test_cmp empty err @@ -45,7 +45,7 @@ test_expect_success 'run_command does not try to execute a directory' ' EOF PATH=$PWD/bin1:$PWD/bin2:$PATH \ - test-run-command run-command greet >actual 2>err && + test-tool run-command run-command greet >actual 2>err && test_cmp bin2/greet actual && test_cmp empty err ' @@ -62,7 +62,7 @@ test_expect_success POSIXPERM 'run_command passes over non-executable file' ' EOF PATH=$PWD/bin1:$PWD/bin2:$PATH \ - test-run-command run-command greet >actual 2>err && + test-tool run-command run-command greet >actual 2>err && test_cmp bin2/greet actual && test_cmp empty err ' @@ -70,7 +70,7 @@ test_expect_success POSIXPERM 'run_command passes over non-executable file' ' test_expect_success POSIXPERM 'run_command reports EACCES' ' cat hello-script >hello.sh && chmod -x hello.sh && - test_must_fail test-run-command run-command ./hello.sh 2>err && + test_must_fail test-tool run-command run-command ./hello.sh 2>err && grep "fatal: cannot exec.*hello.sh" err ' @@ -104,17 +104,17 @@ World EOF test_expect_success 'run_command runs in parallel with more jobs available than tasks' ' - test-run-command run-command-parallel 5 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test-tool run-command run-command-parallel 5 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && test_cmp expect actual ' test_expect_success 'run_command runs in parallel with as many jobs as tasks' ' - test-run-command run-command-parallel 4 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test-tool run-command run-command-parallel 4 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && test_cmp expect actual ' test_expect_success 'run_command runs in parallel with more tasks than jobs available' ' - test-run-command run-command-parallel 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test-tool run-command run-command-parallel 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && test_cmp expect actual ' @@ -128,7 +128,7 @@ asking for a quick stop EOF test_expect_success 'run_command is asked to abort gracefully' ' - test-run-command run-command-abort 3 false 2>actual && + test-tool run-command run-command-abort 3 false 2>actual && test_cmp expect actual ' @@ -137,8 +137,45 @@ no further jobs available EOF test_expect_success 'run_command outputs ' ' - test-run-command run-command-no-jobs 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test-tool run-command run-command-no-jobs 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && test_cmp expect actual ' +test_trace () { + expect="$1" + shift + GIT_TRACE=1 test-tool run-command "$@" run-command true 2>&1 >/dev/null | \ + sed -e 's/.* run_command: //' -e '/trace: .*/d' >actual && + echo "$expect true" >expect && + test_cmp expect actual +} + +test_expect_success 'GIT_TRACE with environment variables' ' + test_trace "abc=1 def=2" env abc=1 env def=2 && + test_trace "abc=2" env abc env abc=1 env abc=2 && + test_trace "abc=2" env abc env abc=2 && + ( + abc=1 && export abc && + test_trace "def=1" env abc=1 env def=1 + ) && + ( + abc=1 && export abc && + test_trace "def=1" env abc env abc=1 env def=1 + ) && + test_trace "def=1" env non-exist env def=1 && + test_trace "abc=2" env abc=1 env abc env abc=2 && + ( + abc=1 def=2 && export abc def && + test_trace "unset abc def;" env abc env def + ) && + ( + abc=1 def=2 && export abc def && + test_trace "unset def; abc=3" env abc env def env abc=3 + ) && + ( + abc=1 && export abc && + test_trace "unset abc;" env abc=2 env abc + ) +' + test_done diff --git a/t/t0062-revision-walking.sh b/t/t0062-revision-walking.sh index 113c728e67..8e215867b8 100755 --- a/t/t0062-revision-walking.sh +++ b/t/t0062-revision-walking.sh @@ -26,7 +26,7 @@ test_expect_success 'setup' ' ' test_expect_success 'revision walking can be done twice' ' - test-revision-walking run-twice >run_twice_actual && + test-tool revision-walking run-twice >run_twice_actual && test_cmp run_twice_expected run_twice_actual ' diff --git a/t/t0063-string-list.sh b/t/t0063-string-list.sh index dbfc05ebdc..c6ee9f66b1 100755 --- a/t/t0063-string-list.sh +++ b/t/t0063-string-list.sh @@ -10,9 +10,9 @@ test_description='Test string list functionality' test_split () { cat >expected && test_expect_success "split $1 at $2, max $3" " - test-string-list split '$1' '$2' '$3' >actual && + test-tool string-list split '$1' '$2' '$3' >actual && test_cmp expected actual && - test-string-list split_in_place '$1' '$2' '$3' >actual && + test-tool string-list split_in_place '$1' '$2' '$3' >actual && test_cmp expected actual " } @@ -61,31 +61,31 @@ test_split ":" ":" "-1" <<EOF EOF test_expect_success "test filter_string_list" ' - test "x-" = "x$(test-string-list filter - y)" && - test "x-" = "x$(test-string-list filter no y)" && - test yes = "$(test-string-list filter yes y)" && - test yes = "$(test-string-list filter no:yes y)" && - test yes = "$(test-string-list filter yes:no y)" && - test y1:y2 = "$(test-string-list filter y1:y2 y)" && - test y2:y1 = "$(test-string-list filter y2:y1 y)" && - test "x-" = "x$(test-string-list filter x1:x2 y)" + test "x-" = "x$(test-tool string-list filter - y)" && + test "x-" = "x$(test-tool string-list filter no y)" && + test yes = "$(test-tool string-list filter yes y)" && + test yes = "$(test-tool string-list filter no:yes y)" && + test yes = "$(test-tool string-list filter yes:no y)" && + test y1:y2 = "$(test-tool string-list filter y1:y2 y)" && + test y2:y1 = "$(test-tool string-list filter y2:y1 y)" && + test "x-" = "x$(test-tool string-list filter x1:x2 y)" ' test_expect_success "test remove_duplicates" ' - test "x-" = "x$(test-string-list remove_duplicates -)" && - test "x" = "x$(test-string-list remove_duplicates "")" && - test a = "$(test-string-list remove_duplicates a)" && - test a = "$(test-string-list remove_duplicates a:a)" && - test a = "$(test-string-list remove_duplicates a:a:a:a:a)" && - test a:b = "$(test-string-list remove_duplicates a:b)" && - test a:b = "$(test-string-list remove_duplicates a:a:b)" && - test a:b = "$(test-string-list remove_duplicates a:b:b)" && - test a:b:c = "$(test-string-list remove_duplicates a:b:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:a:b:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:b:b:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:b:c:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:a:b:b:c:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:a:a:b:b:b:c:c:c)" + test "x-" = "x$(test-tool string-list remove_duplicates -)" && + test "x" = "x$(test-tool string-list remove_duplicates "")" && + test a = "$(test-tool string-list remove_duplicates a)" && + test a = "$(test-tool string-list remove_duplicates a:a)" && + test a = "$(test-tool string-list remove_duplicates a:a:a:a:a)" && + test a:b = "$(test-tool string-list remove_duplicates a:b)" && + test a:b = "$(test-tool string-list remove_duplicates a:a:b)" && + test a:b = "$(test-tool string-list remove_duplicates a:b:b)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:b:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:a:b:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:b:b:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:b:c:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:a:b:b:c:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:a:a:b:b:b:c:c:c)" ' test_done diff --git a/t/t0064-sha1-array.sh b/t/t0064-sha1-array.sh index 50b31ffe75..67484502a0 100755 --- a/t/t0064-sha1-array.sh +++ b/t/t0064-sha1-array.sh @@ -18,7 +18,7 @@ test_expect_success 'ordered enumeration' ' { echo20 append 88 44 aa 55 && echo for_each_unique - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && test_cmp expect actual ' @@ -28,7 +28,7 @@ test_expect_success 'ordered enumeration with duplicate suppression' ' echo20 append 88 44 aa 55 && echo20 append 88 44 aa 55 && echo for_each_unique - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && test_cmp expect actual ' @@ -36,7 +36,7 @@ test_expect_success 'lookup' ' { echo20 append 88 44 aa 55 && echo20 lookup 55 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -eq 1 ' @@ -45,7 +45,7 @@ test_expect_success 'lookup non-existing entry' ' { echo20 append 88 44 aa 55 && echo20 lookup 33 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -lt 0 ' @@ -55,7 +55,7 @@ test_expect_success 'lookup with duplicates' ' echo20 append 88 44 aa 55 && echo20 append 88 44 aa 55 && echo20 lookup 55 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -ge 2 && test "$n" -le 3 @@ -66,7 +66,7 @@ test_expect_success 'lookup non-existing entry with duplicates' ' echo20 append 88 44 aa 55 && echo20 append 88 44 aa 55 && echo20 lookup 66 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -lt 0 ' @@ -76,7 +76,7 @@ test_expect_success 'lookup with almost duplicate values' ' echo "append 5555555555555555555555555555555555555555" && echo "append 555555555555555555555555555555555555555f" && echo20 lookup 55 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -eq 0 ' @@ -85,7 +85,7 @@ test_expect_success 'lookup with single duplicate value' ' { echo20 append 55 55 && echo20 lookup 55 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -ge 0 && test "$n" -le 1 diff --git a/t/t0065-strcmp-offset.sh b/t/t0065-strcmp-offset.sh index 7d6d21425f..91fa639c4a 100755 --- a/t/t0065-strcmp-offset.sh +++ b/t/t0065-strcmp-offset.sh @@ -8,7 +8,7 @@ while read s1 s2 expect do test_expect_success "strcmp_offset($s1, $s2)" ' echo "$expect" >expect && - test-strcmp-offset "$s1" "$s2" >actual && + test-tool strcmp-offset "$s1" "$s2" >actual && test_cmp expect actual ' done <<-EOF diff --git a/t/t0070-fundamental.sh b/t/t0070-fundamental.sh index 991ed2a48d..23fbe6434a 100755 --- a/t/t0070-fundamental.sh +++ b/t/t0070-fundamental.sh @@ -9,11 +9,11 @@ Verify wrappers and compatibility functions. . ./test-lib.sh test_expect_success 'character classes (isspace, isalpha etc.)' ' - test-ctype + test-tool ctype ' test_expect_success 'mktemp to nonexistent directory prints filename' ' - test_must_fail test-mktemp doesnotexist/testXXXXXX 2>err && + test_must_fail test-tool mktemp doesnotexist/testXXXXXX 2>err && grep "doesnotexist/test" err ' @@ -21,7 +21,7 @@ test_expect_success POSIXPERM,SANITY 'mktemp to unwritable directory prints file mkdir cannotwrite && chmod -w cannotwrite && test_when_finished "chmod +w cannotwrite" && - test_must_fail test-mktemp cannotwrite/testXXXXXX 2>err && + test_must_fail test-tool mktemp cannotwrite/testXXXXXX 2>err && grep "cannotwrite/test" err ' @@ -31,7 +31,7 @@ test_expect_success 'git_mkstemps_mode does not fail if fd 0 is not open' ' test_expect_success 'check for a bug in the regex routines' ' # if this test fails, re-build git with NO_REGEX=1 - test-regex --bug + test-tool regex --bug ' test_done diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh index adfd4f0b5e..4ae0995cd9 100755 --- a/t/t0090-cache-tree.sh +++ b/t/t0090-cache-tree.sh @@ -8,13 +8,13 @@ cache-tree extension. . ./test-lib.sh cmp_cache_tree () { - test-dump-cache-tree | sed -e '/#(ref)/d' >actual && + test-tool dump-cache-tree | sed -e '/#(ref)/d' >actual && sed "s/$_x40/SHA/" <actual >filtered && test_cmp "$1" filtered } # We don't bother with actually checking the SHA1: -# test-dump-cache-tree already verifies that all existing data is +# test-tool dump-cache-tree already verifies that all existing data is # correct. generate_expected_cache_tree_rec () { dir="$1${1:+/}" && @@ -47,7 +47,7 @@ test_cache_tree () { test_invalid_cache_tree () { printf "invalid %s ()\n" "" "$@" >expect && - test-dump-cache-tree | + test-tool dump-cache-tree | sed -n -e "s/[0-9]* subtrees//" -e '/#(ref)/d' -e '/^invalid /p' >actual && test_cmp expect actual } @@ -115,14 +115,14 @@ test_expect_success 'update-index invalidates cache-tree' ' ' test_expect_success 'write-tree establishes cache-tree' ' - test-scrap-cache-tree && + test-tool scrap-cache-tree && git write-tree && test_cache_tree ' -test_expect_success 'test-scrap-cache-tree works' ' +test_expect_success 'test-tool scrap-cache-tree works' ' git read-tree HEAD && - test-scrap-cache-tree && + test-tool scrap-cache-tree && test_no_cache_tree ' @@ -170,7 +170,7 @@ test_expect_success 'commit in child dir has cache-tree' ' ' test_expect_success 'reset --hard gives cache-tree' ' - test-scrap-cache-tree && + test-tool scrap-cache-tree && git reset --hard && test_cache_tree ' @@ -246,9 +246,9 @@ test_expect_success 'switching trees does not invalidate shared index' ' git update-index --split-index && >split && git add split && - test-dump-split-index .git/index | grep -v ^own >before && + test-tool dump-split-index .git/index | grep -v ^own >before && git commit -m "as-is" && - test-dump-split-index .git/index | grep -v ^own >after && + test-tool dump-split-index .git/index | grep -v ^own >after && test_cmp before after ' diff --git a/t/t0110-urlmatch-normalization.sh b/t/t0110-urlmatch-normalization.sh index 410d5768ca..f99529d838 100755 --- a/t/t0110-urlmatch-normalization.sh +++ b/t/t0110-urlmatch-normalization.sh @@ -9,172 +9,172 @@ tu="$TEST_DIRECTORY/t0110/url" # Note that only file: URLs should be allowed without a host test_expect_success 'url scheme' ' - ! test-urlmatch-normalization "" && - ! test-urlmatch-normalization "_" && - ! test-urlmatch-normalization "scheme" && - ! test-urlmatch-normalization "scheme:" && - ! test-urlmatch-normalization "scheme:/" && - ! test-urlmatch-normalization "scheme://" && - ! test-urlmatch-normalization "file" && - ! test-urlmatch-normalization "file:" && - ! test-urlmatch-normalization "file:/" && - test-urlmatch-normalization "file://" && - ! test-urlmatch-normalization "://acme.co" && - ! test-urlmatch-normalization "x_test://acme.co" && - ! test-urlmatch-normalization "-test://acme.co" && - ! test-urlmatch-normalization "0test://acme.co" && - ! test-urlmatch-normalization "+test://acme.co" && - ! test-urlmatch-normalization ".test://acme.co" && - ! test-urlmatch-normalization "schem%6e://" && - test-urlmatch-normalization "x-Test+v1.0://acme.co" && - test "$(test-urlmatch-normalization -p "AbCdeF://x.Y")" = "abcdef://x.y/" + ! test-tool urlmatch-normalization "" && + ! test-tool urlmatch-normalization "_" && + ! test-tool urlmatch-normalization "scheme" && + ! test-tool urlmatch-normalization "scheme:" && + ! test-tool urlmatch-normalization "scheme:/" && + ! test-tool urlmatch-normalization "scheme://" && + ! test-tool urlmatch-normalization "file" && + ! test-tool urlmatch-normalization "file:" && + ! test-tool urlmatch-normalization "file:/" && + test-tool urlmatch-normalization "file://" && + ! test-tool urlmatch-normalization "://acme.co" && + ! test-tool urlmatch-normalization "x_test://acme.co" && + ! test-tool urlmatch-normalization "-test://acme.co" && + ! test-tool urlmatch-normalization "0test://acme.co" && + ! test-tool urlmatch-normalization "+test://acme.co" && + ! test-tool urlmatch-normalization ".test://acme.co" && + ! test-tool urlmatch-normalization "schem%6e://" && + test-tool urlmatch-normalization "x-Test+v1.0://acme.co" && + test "$(test-tool urlmatch-normalization -p "AbCdeF://x.Y")" = "abcdef://x.y/" ' test_expect_success 'url authority' ' - ! test-urlmatch-normalization "scheme://user:pass@" && - ! test-urlmatch-normalization "scheme://?" && - ! test-urlmatch-normalization "scheme://#" && - ! test-urlmatch-normalization "scheme:///" && - ! test-urlmatch-normalization "scheme://:" && - ! test-urlmatch-normalization "scheme://:555" && - test-urlmatch-normalization "file://user:pass@" && - test-urlmatch-normalization "file://?" && - test-urlmatch-normalization "file://#" && - test-urlmatch-normalization "file:///" && - test-urlmatch-normalization "file://:" && - ! test-urlmatch-normalization "file://:555" && - test-urlmatch-normalization "scheme://user:pass@host" && - test-urlmatch-normalization "scheme://@host" && - test-urlmatch-normalization "scheme://%00@host" && - ! test-urlmatch-normalization "scheme://%%@host" && - ! test-urlmatch-normalization "scheme://host_" && - test-urlmatch-normalization "scheme://user:pass@host/" && - test-urlmatch-normalization "scheme://@host/" && - test-urlmatch-normalization "scheme://host/" && - test-urlmatch-normalization "scheme://host?x" && - test-urlmatch-normalization "scheme://host#x" && - test-urlmatch-normalization "scheme://host/@" && - test-urlmatch-normalization "scheme://host?@x" && - test-urlmatch-normalization "scheme://host#@x" && - test-urlmatch-normalization "scheme://[::1]" && - test-urlmatch-normalization "scheme://[::1]/" && - ! test-urlmatch-normalization "scheme://hos%41/" && - test-urlmatch-normalization "scheme://[invalid....:/" && - test-urlmatch-normalization "scheme://invalid....:]/" && - ! test-urlmatch-normalization "scheme://invalid....:[/" && - ! test-urlmatch-normalization "scheme://invalid....:[" + ! test-tool urlmatch-normalization "scheme://user:pass@" && + ! test-tool urlmatch-normalization "scheme://?" && + ! test-tool urlmatch-normalization "scheme://#" && + ! test-tool urlmatch-normalization "scheme:///" && + ! test-tool urlmatch-normalization "scheme://:" && + ! test-tool urlmatch-normalization "scheme://:555" && + test-tool urlmatch-normalization "file://user:pass@" && + test-tool urlmatch-normalization "file://?" && + test-tool urlmatch-normalization "file://#" && + test-tool urlmatch-normalization "file:///" && + test-tool urlmatch-normalization "file://:" && + ! test-tool urlmatch-normalization "file://:555" && + test-tool urlmatch-normalization "scheme://user:pass@host" && + test-tool urlmatch-normalization "scheme://@host" && + test-tool urlmatch-normalization "scheme://%00@host" && + ! test-tool urlmatch-normalization "scheme://%%@host" && + ! test-tool urlmatch-normalization "scheme://host_" && + test-tool urlmatch-normalization "scheme://user:pass@host/" && + test-tool urlmatch-normalization "scheme://@host/" && + test-tool urlmatch-normalization "scheme://host/" && + test-tool urlmatch-normalization "scheme://host?x" && + test-tool urlmatch-normalization "scheme://host#x" && + test-tool urlmatch-normalization "scheme://host/@" && + test-tool urlmatch-normalization "scheme://host?@x" && + test-tool urlmatch-normalization "scheme://host#@x" && + test-tool urlmatch-normalization "scheme://[::1]" && + test-tool urlmatch-normalization "scheme://[::1]/" && + ! test-tool urlmatch-normalization "scheme://hos%41/" && + test-tool urlmatch-normalization "scheme://[invalid....:/" && + test-tool urlmatch-normalization "scheme://invalid....:]/" && + ! test-tool urlmatch-normalization "scheme://invalid....:[/" && + ! test-tool urlmatch-normalization "scheme://invalid....:[" ' test_expect_success 'url port checks' ' - test-urlmatch-normalization "xyz://q@some.host:" && - test-urlmatch-normalization "xyz://q@some.host:456/" && - ! test-urlmatch-normalization "xyz://q@some.host:0" && - ! test-urlmatch-normalization "xyz://q@some.host:0000000" && - test-urlmatch-normalization "xyz://q@some.host:0000001?" && - test-urlmatch-normalization "xyz://q@some.host:065535#" && - test-urlmatch-normalization "xyz://q@some.host:65535" && - ! test-urlmatch-normalization "xyz://q@some.host:65536" && - ! test-urlmatch-normalization "xyz://q@some.host:99999" && - ! test-urlmatch-normalization "xyz://q@some.host:100000" && - ! test-urlmatch-normalization "xyz://q@some.host:100001" && - test-urlmatch-normalization "http://q@some.host:80" && - test-urlmatch-normalization "https://q@some.host:443" && - test-urlmatch-normalization "http://q@some.host:80/" && - test-urlmatch-normalization "https://q@some.host:443?" && - ! test-urlmatch-normalization "http://q@:8008" && - ! test-urlmatch-normalization "http://:8080" && - ! test-urlmatch-normalization "http://:" && - test-urlmatch-normalization "xyz://q@some.host:456/" && - test-urlmatch-normalization "xyz://[::1]:456/" && - test-urlmatch-normalization "xyz://[::1]:/" && - ! test-urlmatch-normalization "xyz://[::1]:000/" && - ! test-urlmatch-normalization "xyz://[::1]:0%300/" && - ! test-urlmatch-normalization "xyz://[::1]:0x80/" && - ! test-urlmatch-normalization "xyz://[::1]:4294967297/" && - ! test-urlmatch-normalization "xyz://[::1]:030f/" + test-tool urlmatch-normalization "xyz://q@some.host:" && + test-tool urlmatch-normalization "xyz://q@some.host:456/" && + ! test-tool urlmatch-normalization "xyz://q@some.host:0" && + ! test-tool urlmatch-normalization "xyz://q@some.host:0000000" && + test-tool urlmatch-normalization "xyz://q@some.host:0000001?" && + test-tool urlmatch-normalization "xyz://q@some.host:065535#" && + test-tool urlmatch-normalization "xyz://q@some.host:65535" && + ! test-tool urlmatch-normalization "xyz://q@some.host:65536" && + ! test-tool urlmatch-normalization "xyz://q@some.host:99999" && + ! test-tool urlmatch-normalization "xyz://q@some.host:100000" && + ! test-tool urlmatch-normalization "xyz://q@some.host:100001" && + test-tool urlmatch-normalization "http://q@some.host:80" && + test-tool urlmatch-normalization "https://q@some.host:443" && + test-tool urlmatch-normalization "http://q@some.host:80/" && + test-tool urlmatch-normalization "https://q@some.host:443?" && + ! test-tool urlmatch-normalization "http://q@:8008" && + ! test-tool urlmatch-normalization "http://:8080" && + ! test-tool urlmatch-normalization "http://:" && + test-tool urlmatch-normalization "xyz://q@some.host:456/" && + test-tool urlmatch-normalization "xyz://[::1]:456/" && + test-tool urlmatch-normalization "xyz://[::1]:/" && + ! test-tool urlmatch-normalization "xyz://[::1]:000/" && + ! test-tool urlmatch-normalization "xyz://[::1]:0%300/" && + ! test-tool urlmatch-normalization "xyz://[::1]:0x80/" && + ! test-tool urlmatch-normalization "xyz://[::1]:4294967297/" && + ! test-tool urlmatch-normalization "xyz://[::1]:030f/" ' test_expect_success 'url port normalization' ' - test "$(test-urlmatch-normalization -p "http://x:800")" = "http://x:800/" && - test "$(test-urlmatch-normalization -p "http://x:0800")" = "http://x:800/" && - test "$(test-urlmatch-normalization -p "http://x:00000800")" = "http://x:800/" && - test "$(test-urlmatch-normalization -p "http://x:065535")" = "http://x:65535/" && - test "$(test-urlmatch-normalization -p "http://x:1")" = "http://x:1/" && - test "$(test-urlmatch-normalization -p "http://x:80")" = "http://x/" && - test "$(test-urlmatch-normalization -p "http://x:080")" = "http://x/" && - test "$(test-urlmatch-normalization -p "http://x:000000080")" = "http://x/" && - test "$(test-urlmatch-normalization -p "https://x:443")" = "https://x/" && - test "$(test-urlmatch-normalization -p "https://x:0443")" = "https://x/" && - test "$(test-urlmatch-normalization -p "https://x:000000443")" = "https://x/" + test "$(test-tool urlmatch-normalization -p "http://x:800")" = "http://x:800/" && + test "$(test-tool urlmatch-normalization -p "http://x:0800")" = "http://x:800/" && + test "$(test-tool urlmatch-normalization -p "http://x:00000800")" = "http://x:800/" && + test "$(test-tool urlmatch-normalization -p "http://x:065535")" = "http://x:65535/" && + test "$(test-tool urlmatch-normalization -p "http://x:1")" = "http://x:1/" && + test "$(test-tool urlmatch-normalization -p "http://x:80")" = "http://x/" && + test "$(test-tool urlmatch-normalization -p "http://x:080")" = "http://x/" && + test "$(test-tool urlmatch-normalization -p "http://x:000000080")" = "http://x/" && + test "$(test-tool urlmatch-normalization -p "https://x:443")" = "https://x/" && + test "$(test-tool urlmatch-normalization -p "https://x:0443")" = "https://x/" && + test "$(test-tool urlmatch-normalization -p "https://x:000000443")" = "https://x/" ' test_expect_success 'url general escapes' ' - ! test-urlmatch-normalization "http://x.y?%fg" && - test "$(test-urlmatch-normalization -p "X://W/%7e%41^%3a")" = "x://w/~A%5E%3A" && - test "$(test-urlmatch-normalization -p "X://W/:/?#[]@")" = "x://w/:/?#[]@" && - test "$(test-urlmatch-normalization -p "X://W/$&()*+,;=")" = "x://w/$&()*+,;=" && - test "$(test-urlmatch-normalization -p "X://W/'\''")" = "x://w/'\''" && - test "$(test-urlmatch-normalization -p "X://W?'\!'")" = "x://w/?'\!'" + ! test-tool urlmatch-normalization "http://x.y?%fg" && + test "$(test-tool urlmatch-normalization -p "X://W/%7e%41^%3a")" = "x://w/~A%5E%3A" && + test "$(test-tool urlmatch-normalization -p "X://W/:/?#[]@")" = "x://w/:/?#[]@" && + test "$(test-tool urlmatch-normalization -p "X://W/$&()*+,;=")" = "x://w/$&()*+,;=" && + test "$(test-tool urlmatch-normalization -p "X://W/'\''")" = "x://w/'\''" && + test "$(test-tool urlmatch-normalization -p "X://W?'\!'")" = "x://w/?'\!'" ' test_expect_success !MINGW 'url high-bit escapes' ' - test "$(test-urlmatch-normalization -p "$(cat "$tu-1")")" = "x://q/%01%02%03%04%05%06%07%08%0E%0F%10%11%12" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-2")")" = "x://q/%13%14%15%16%17%18%19%1B%1C%1D%1E%1F%7F" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-3")")" = "x://q/%80%81%82%83%84%85%86%87%88%89%8A%8B%8C%8D%8E%8F" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-4")")" = "x://q/%90%91%92%93%94%95%96%97%98%99%9A%9B%9C%9D%9E%9F" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-5")")" = "x://q/%A0%A1%A2%A3%A4%A5%A6%A7%A8%A9%AA%AB%AC%AD%AE%AF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-6")")" = "x://q/%B0%B1%B2%B3%B4%B5%B6%B7%B8%B9%BA%BB%BC%BD%BE%BF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-7")")" = "x://q/%C0%C1%C2%C3%C4%C5%C6%C7%C8%C9%CA%CB%CC%CD%CE%CF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-8")")" = "x://q/%D0%D1%D2%D3%D4%D5%D6%D7%D8%D9%DA%DB%DC%DD%DE%DF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-9")")" = "x://q/%E0%E1%E2%E3%E4%E5%E6%E7%E8%E9%EA%EB%EC%ED%EE%EF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-10")")" = "x://q/%F0%F1%F2%F3%F4%F5%F6%F7%F8%F9%FA%FB%FC%FD%FE%FF" + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-1")")" = "x://q/%01%02%03%04%05%06%07%08%0E%0F%10%11%12" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-2")")" = "x://q/%13%14%15%16%17%18%19%1B%1C%1D%1E%1F%7F" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-3")")" = "x://q/%80%81%82%83%84%85%86%87%88%89%8A%8B%8C%8D%8E%8F" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-4")")" = "x://q/%90%91%92%93%94%95%96%97%98%99%9A%9B%9C%9D%9E%9F" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-5")")" = "x://q/%A0%A1%A2%A3%A4%A5%A6%A7%A8%A9%AA%AB%AC%AD%AE%AF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-6")")" = "x://q/%B0%B1%B2%B3%B4%B5%B6%B7%B8%B9%BA%BB%BC%BD%BE%BF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-7")")" = "x://q/%C0%C1%C2%C3%C4%C5%C6%C7%C8%C9%CA%CB%CC%CD%CE%CF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-8")")" = "x://q/%D0%D1%D2%D3%D4%D5%D6%D7%D8%D9%DA%DB%DC%DD%DE%DF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-9")")" = "x://q/%E0%E1%E2%E3%E4%E5%E6%E7%E8%E9%EA%EB%EC%ED%EE%EF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-10")")" = "x://q/%F0%F1%F2%F3%F4%F5%F6%F7%F8%F9%FA%FB%FC%FD%FE%FF" ' test_expect_success 'url utf-8 escapes' ' - test "$(test-urlmatch-normalization -p "$(cat "$tu-11")")" = "x://q/%C2%80%DF%BF%E0%A0%80%EF%BF%BD%F0%90%80%80%F0%AF%BF%BD" + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-11")")" = "x://q/%C2%80%DF%BF%E0%A0%80%EF%BF%BD%F0%90%80%80%F0%AF%BF%BD" ' test_expect_success 'url username/password escapes' ' - test "$(test-urlmatch-normalization -p "x://%41%62(^):%70+d@foo")" = "x://Ab(%5E):p+d@foo/" + test "$(test-tool urlmatch-normalization -p "x://%41%62(^):%70+d@foo")" = "x://Ab(%5E):p+d@foo/" ' test_expect_success 'url normalized lengths' ' - test "$(test-urlmatch-normalization -l "Http://%4d%65:%4d^%70@The.Host")" = 25 && - test "$(test-urlmatch-normalization -l "http://%41:%42@x.y/%61/")" = 17 && - test "$(test-urlmatch-normalization -l "http://@x.y/^")" = 15 + test "$(test-tool urlmatch-normalization -l "Http://%4d%65:%4d^%70@The.Host")" = 25 && + test "$(test-tool urlmatch-normalization -l "http://%41:%42@x.y/%61/")" = 17 && + test "$(test-tool urlmatch-normalization -l "http://@x.y/^")" = 15 ' test_expect_success 'url . and .. segments' ' - test "$(test-urlmatch-normalization -p "x://y/.")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/./")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/a/.")" = "x://y/a" && - test "$(test-urlmatch-normalization -p "x://y/a/./")" = "x://y/a/" && - test "$(test-urlmatch-normalization -p "x://y/.?")" = "x://y/?" && - test "$(test-urlmatch-normalization -p "x://y/./?")" = "x://y/?" && - test "$(test-urlmatch-normalization -p "x://y/a/.?")" = "x://y/a?" && - test "$(test-urlmatch-normalization -p "x://y/a/./?")" = "x://y/a/?" && - test "$(test-urlmatch-normalization -p "x://y/a/./b/.././../c")" = "x://y/c" && - test "$(test-urlmatch-normalization -p "x://y/a/./b/../.././c/")" = "x://y/c/" && - test "$(test-urlmatch-normalization -p "x://y/a/./b/.././../c/././.././.")" = "x://y/" && - ! test-urlmatch-normalization "x://y/a/./b/.././../c/././.././.." && - test "$(test-urlmatch-normalization -p "x://y/a/./?/././..")" = "x://y/a/?/././.." && - test "$(test-urlmatch-normalization -p "x://y/%2e/")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/%2E/")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/a/%2e./")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/b/.%2E/")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/c/%2e%2E/")" = "x://y/" + test "$(test-tool urlmatch-normalization -p "x://y/.")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/./")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/a/.")" = "x://y/a" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./")" = "x://y/a/" && + test "$(test-tool urlmatch-normalization -p "x://y/.?")" = "x://y/?" && + test "$(test-tool urlmatch-normalization -p "x://y/./?")" = "x://y/?" && + test "$(test-tool urlmatch-normalization -p "x://y/a/.?")" = "x://y/a?" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./?")" = "x://y/a/?" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./b/.././../c")" = "x://y/c" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./b/../.././c/")" = "x://y/c/" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./b/.././../c/././.././.")" = "x://y/" && + ! test-tool urlmatch-normalization "x://y/a/./b/.././../c/././.././.." && + test "$(test-tool urlmatch-normalization -p "x://y/a/./?/././..")" = "x://y/a/?/././.." && + test "$(test-tool urlmatch-normalization -p "x://y/%2e/")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/%2E/")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/a/%2e./")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/b/.%2E/")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/c/%2e%2E/")" = "x://y/" ' # http://@foo specifies an empty user name but does not specify a password # http://foo specifies neither a user name nor a password # So they should not be equivalent test_expect_success 'url equivalents' ' - test-urlmatch-normalization "httP://x" "Http://X/" && - test-urlmatch-normalization "Http://%4d%65:%4d^%70@The.Host" "hTTP://Me:%4D^p@the.HOST:80/" && - ! test-urlmatch-normalization "https://@x.y/^" "httpS://x.y:443/^" && - test-urlmatch-normalization "https://@x.y/^" "httpS://@x.y:0443/^" && - test-urlmatch-normalization "https://@x.y/^/../abc" "httpS://@x.y:0443/abc" && - test-urlmatch-normalization "https://@x.y/^/.." "httpS://@x.y:0443/" + test-tool urlmatch-normalization "httP://x" "Http://X/" && + test-tool urlmatch-normalization "Http://%4d%65:%4d^%70@The.Host" "hTTP://Me:%4D^p@the.HOST:80/" && + ! test-tool urlmatch-normalization "https://@x.y/^" "httpS://x.y:443/^" && + test-tool urlmatch-normalization "https://@x.y/^" "httpS://@x.y:0443/^" && + test-tool urlmatch-normalization "https://@x.y/^/../abc" "httpS://@x.y:0443/abc" && + test-tool urlmatch-normalization "https://@x.y/^/.." "httpS://@x.y:0443/" ' test_done diff --git a/t/t0205-gettext-poison.sh b/t/t0205-gettext-poison.sh index 2361590d54..438e778d6a 100755 --- a/t/t0205-gettext-poison.sh +++ b/t/t0205-gettext-poison.sh @@ -7,10 +7,6 @@ test_description='Gettext Shell poison' . ./lib-gettext.sh -test_expect_success GETTEXT_POISON "sanity: \$GIT_INTERNAL_GETTEXT_SH_SCHEME is set (to $GIT_INTERNAL_GETTEXT_SH_SCHEME)" ' - test -n "$GIT_INTERNAL_GETTEXT_SH_SCHEME" -' - test_expect_success GETTEXT_POISON 'sanity: $GIT_INTERNAL_GETTEXT_SH_SCHEME" is poison' ' test "$GIT_INTERNAL_GETTEXT_SH_SCHEME" = "poison" ' diff --git a/t/t0302-credential-store.sh b/t/t0302-credential-store.sh index 1d8d1f210b..d6b54e8c65 100755 --- a/t/t0302-credential-store.sh +++ b/t/t0302-credential-store.sh @@ -37,7 +37,7 @@ helper_test store unset XDG_CONFIG_HOME test_expect_success 'if custom xdg file exists, home and xdg files not created' ' - test_when_finished "rm -f $HOME/xdg/git/credentials" && + test_when_finished "rm -f \"$HOME/xdg/git/credentials\"" && test -s "$HOME/xdg/git/credentials" && test_path_is_missing "$HOME/.git-credentials" && test_path_is_missing "$HOME/.config/git/credentials" diff --git a/t/t0410-partial-clone.sh b/t/t0410-partial-clone.sh new file mode 100755 index 0000000000..cc18b75c03 --- /dev/null +++ b/t/t0410-partial-clone.sh @@ -0,0 +1,343 @@ +#!/bin/sh + +test_description='partial clone' + +. ./test-lib.sh + +delete_object () { + rm $1/.git/objects/$(echo $2 | sed -e 's|^..|&/|') +} + +pack_as_from_promisor () { + HASH=$(git -C repo pack-objects .git/objects/pack/pack) && + >repo/.git/objects/pack/pack-$HASH.promisor && + echo $HASH +} + +promise_and_delete () { + HASH=$(git -C repo rev-parse "$1") && + git -C repo tag -a -m message my_annotated_tag "$HASH" && + git -C repo rev-parse my_annotated_tag | pack_as_from_promisor && + # tag -d prints a message to stdout, so redirect it + git -C repo tag -d my_annotated_tag >/dev/null && + delete_object repo "$HASH" +} + +test_expect_success 'missing reflog object, but promised by a commit, passes fsck' ' + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + C=$(git -C repo commit-tree -m c -p $A HEAD^{tree}) && + + # Reference $A only from reflog, and delete it + git -C repo branch my_branch "$A" && + git -C repo branch -f my_branch my_commit && + delete_object repo "$A" && + + # State that we got $C, which refers to $A, from promisor + printf "$C\n" | pack_as_from_promisor && + + # Normally, it fails + test_must_fail git -C repo fsck && + + # But with the extension, it succeeds + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing reflog object, but promised by a tag, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + git -C repo tag -a -m d my_tag_name $A && + T=$(git -C repo rev-parse my_tag_name) && + git -C repo tag -d my_tag_name && + + # Reference $A only from reflog, and delete it + git -C repo branch my_branch "$A" && + git -C repo branch -f my_branch my_commit && + delete_object repo "$A" && + + # State that we got $T, which refers to $A, from promisor + printf "$T\n" | pack_as_from_promisor && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing reflog object alone fails fsck, even with extension set' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + B=$(git -C repo commit-tree -m b HEAD^{tree}) && + + # Reference $A only from reflog, and delete it + git -C repo branch my_branch "$A" && + git -C repo branch -f my_branch my_commit && + delete_object repo "$A" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + test_must_fail git -C repo fsck +' + +test_expect_success 'missing ref object, but promised, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + + # Reference $A only from ref + git -C repo branch my_branch "$A" && + promise_and_delete "$A" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing object, but promised, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo 1 && + test_commit -C repo 2 && + test_commit -C repo 3 && + git -C repo tag -a annotated_tag -m "annotated tag" && + + C=$(git -C repo rev-parse 1) && + T=$(git -C repo rev-parse 2^{tree}) && + B=$(git hash-object repo/3.t) && + AT=$(git -C repo rev-parse annotated_tag) && + + promise_and_delete "$C" && + promise_and_delete "$T" && + promise_and_delete "$B" && + promise_and_delete "$AT" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing CLI object, but promised, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + promise_and_delete "$A" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck "$A" +' + +test_expect_success 'fetching of missing objects' ' + rm -rf repo && + test_create_repo server && + test_commit -C server foo && + git -C server repack -a -d --write-bitmap-index && + + git clone "file://$(pwd)/server" repo && + HASH=$(git -C repo rev-parse foo) && + rm -rf repo/.git/objects/* && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "origin" && + git -C repo cat-file -p "$HASH" && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(cat promisorlist | sed "s/promisor$/idx/") && + git verify-pack --verbose "$IDX" | grep "$HASH" +' + +test_expect_success 'rev-list stops traversal at missing and promised commit' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + + FOO=$(git -C repo rev-parse foo) && + promise_and_delete "$FOO" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects bar >out && + grep $(git -C repo rev-parse bar) out && + ! grep $FOO out +' + +test_expect_success 'rev-list stops traversal at missing and promised tree' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + mkdir repo/a_dir && + echo something >repo/a_dir/something && + git -C repo add a_dir/something && + git -C repo commit -m bar && + + # foo^{tree} (tree referenced from commit) + TREE=$(git -C repo rev-parse foo^{tree}) && + + # a tree referenced by HEAD^{tree} (tree referenced from tree) + TREE2=$(git -C repo ls-tree HEAD^{tree} | grep " tree " | head -1 | cut -b13-52) && + + promise_and_delete "$TREE" && + promise_and_delete "$TREE2" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >out && + grep $(git -C repo rev-parse foo) out && + ! grep $TREE out && + grep $(git -C repo rev-parse HEAD) out && + ! grep $TREE2 out +' + +test_expect_success 'rev-list stops traversal at missing and promised blob' ' + rm -rf repo && + test_create_repo repo && + echo something >repo/something && + git -C repo add something && + git -C repo commit -m foo && + + BLOB=$(git -C repo hash-object -w something) && + promise_and_delete "$BLOB" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >out && + grep $(git -C repo rev-parse HEAD) out && + ! grep $BLOB out +' + +test_expect_success 'rev-list stops traversal at promisor commit, tree, and blob' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + test_commit -C repo baz && + + COMMIT=$(git -C repo rev-parse foo) && + TREE=$(git -C repo rev-parse bar^{tree}) && + BLOB=$(git hash-object repo/baz.t) && + printf "%s\n%s\n%s\n" $COMMIT $TREE $BLOB | pack_as_from_promisor && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >out && + ! grep $COMMIT out && + ! grep $TREE out && + ! grep $BLOB out && + grep $(git -C repo rev-parse bar) out # sanity check that some walking was done +' + +test_expect_success 'rev-list accepts missing and promised objects on command line' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + test_commit -C repo baz && + + COMMIT=$(git -C repo rev-parse foo) && + TREE=$(git -C repo rev-parse bar^{tree}) && + BLOB=$(git hash-object repo/baz.t) && + + promise_and_delete $COMMIT && + promise_and_delete $TREE && + promise_and_delete $BLOB && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects "$COMMIT" "$TREE" "$BLOB" +' + +test_expect_success 'gc does not repack promisor objects' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + TREE_HASH=$(git -C repo rev-parse HEAD^{tree}) && + HASH=$(printf "$TREE_HASH\n" | pack_as_from_promisor) && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo gc && + + # Ensure that the promisor packfile still exists, and remove it + test -e repo/.git/objects/pack/pack-$HASH.pack && + rm repo/.git/objects/pack/pack-$HASH.* && + + # Ensure that the single other pack contains the commit, but not the tree + ls repo/.git/objects/pack/pack-*.pack >packlist && + test_line_count = 1 packlist && + git verify-pack repo/.git/objects/pack/pack-*.pack -v >out && + grep "$(git -C repo rev-parse HEAD)" out && + ! grep "$TREE_HASH" out +' + +test_expect_success 'gc stops traversal when a missing but promised object is reached' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + TREE_HASH=$(git -C repo rev-parse HEAD^{tree}) && + HASH=$(promise_and_delete $TREE_HASH) && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo gc && + + # Ensure that the promisor packfile still exists, and remove it + test -e repo/.git/objects/pack/pack-$HASH.pack && + rm repo/.git/objects/pack/pack-$HASH.* && + + # Ensure that the single other pack contains the commit, but not the tree + ls repo/.git/objects/pack/pack-*.pack >packlist && + test_line_count = 1 packlist && + git verify-pack repo/.git/objects/pack/pack-*.pack -v >out && + grep "$(git -C repo rev-parse HEAD)" out && + ! grep "$TREE_HASH" out +' + +LIB_HTTPD_PORT=12345 # default port, 410, cannot be used as non-root +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'fetching of missing objects from an HTTP server' ' + rm -rf repo && + SERVER="$HTTPD_DOCUMENT_ROOT_PATH/server" && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" foo && + git -C "$SERVER" repack -a -d --write-bitmap-index && + + git clone $HTTPD_URL/smart/server repo && + HASH=$(git -C repo rev-parse foo) && + rm -rf repo/.git/objects/* && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "origin" && + git -C repo cat-file -p "$HASH" && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(cat promisorlist | sed "s/promisor$/idx/") && + git verify-pack --verbose "$IDX" | grep "$HASH" +' + +stop_httpd + +test_done diff --git a/t/t1004-read-tree-m-u-wf.sh b/t/t1004-read-tree-m-u-wf.sh index c70cf42300..c7ce5d8bb5 100755 --- a/t/t1004-read-tree-m-u-wf.sh +++ b/t/t1004-read-tree-m-u-wf.sh @@ -218,7 +218,7 @@ test_expect_success 'D/F' ' echo "100644 $a 2 subdir/file2" echo "100644 $b 3 subdir/file2/another" ) >expect && - test_cmp actual expect + test_cmp expect actual ' diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index b19f332694..2ac3b940c6 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -282,7 +282,7 @@ test_expect_success "--batch-check with multiple sha1s gives correct format" ' ' test_expect_success 'setup blobs which are likely to delta' ' - test-genrandom foo 10240 >foo && + test-tool genrandom foo 10240 >foo && { cat foo; echo plus; } >foo-plus && git add foo foo-plus && git commit -m foo && diff --git a/t/t1011-read-tree-sparse-checkout.sh b/t/t1011-read-tree-sparse-checkout.sh index c167f606ca..0c6f48f302 100755 --- a/t/t1011-read-tree-sparse-checkout.sh +++ b/t/t1011-read-tree-sparse-checkout.sh @@ -15,8 +15,11 @@ test_description='sparse checkout tests . "$TEST_DIRECTORY"/lib-read-tree.sh test_expect_success 'setup' ' + test_commit init && + echo modified >>init.t && + cat >expected <<-EOF && - 100644 77f0ba1734ed79d12881f81b36ee134de6a3327b 0 init.t + 100644 $(git hash-object init.t) 0 init.t 100644 $EMPTY_BLOB 0 sub/added 100644 $EMPTY_BLOB 0 sub/addedtoo 100644 $EMPTY_BLOB 0 subsub/added @@ -28,8 +31,6 @@ test_expect_success 'setup' ' H subsub/added EOF - test_commit init && - echo modified >>init.t && mkdir sub subsub && touch sub/added sub/addedtoo subsub/added && git add init.t sub/added sub/addedtoo subsub/added && diff --git a/t/t1050-large.sh b/t/t1050-large.sh index 6fd264cff0..f9eb143f43 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -103,9 +103,9 @@ test_expect_success 'packsize limit' ' # mid1 and mid2 will fit within 256k limit but # appending mid3 will bust the limit and will # result in a separate packfile. - test-genrandom "a" $(( 66 * 1024 )) >mid1 && - test-genrandom "b" $(( 80 * 1024 )) >mid2 && - test-genrandom "c" $(( 128 * 1024 )) >mid3 && + test-tool genrandom "a" $(( 66 * 1024 )) >mid1 && + test-tool genrandom "b" $(( 80 * 1024 )) >mid2 && + test-tool genrandom "c" $(( 128 * 1024 )) >mid3 && git add mid1 mid2 mid3 && count=0 diff --git a/t/t1200-tutorial.sh b/t/t1200-tutorial.sh deleted file mode 100755 index 397ccb6909..0000000000 --- a/t/t1200-tutorial.sh +++ /dev/null @@ -1,268 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2005 Johannes Schindelin -# - -test_description='A simple turial in the form of a test case' - -. ./test-lib.sh - -test_expect_success 'blob' ' - echo "Hello World" > hello && - echo "Silly example" > example && - - git update-index --add hello example && - - test blob = "$(git cat-file -t 557db03)" -' - -test_expect_success 'blob 557db03' ' - test "Hello World" = "$(git cat-file blob 557db03)" -' - -echo "It's a new day for git" >>hello -cat > diff.expect << EOF -diff --git a/hello b/hello -index 557db03..263414f 100644 ---- a/hello -+++ b/hello -@@ -1 +1,2 @@ - Hello World -+It's a new day for git -EOF - -test_expect_success 'git diff-files -p' ' - git diff-files -p > diff.output && - test_cmp diff.expect diff.output -' - -test_expect_success 'git diff' ' - git diff > diff.output && - test_cmp diff.expect diff.output -' - -test_expect_success 'tree' ' - tree=$(git write-tree 2>/dev/null) && - test 8988da15d077d4829fc51d8544c097def6644dbb = $tree -' - -test_expect_success 'git diff-index -p HEAD' ' - test_tick && - tree=$(git write-tree) && - commit=$(echo "Initial commit" | git commit-tree $tree) && - git update-ref HEAD $commit && - git diff-index -p HEAD > diff.output && - test_cmp diff.expect diff.output -' - -test_expect_success 'git diff HEAD' ' - git diff HEAD > diff.output && - test_cmp diff.expect diff.output -' - -cat > whatchanged.expect << EOF -commit VARIABLE -Author: VARIABLE -Date: VARIABLE - - Initial commit - -diff --git a/example b/example -new file mode 100644 -index 0000000..f24c74a ---- /dev/null -+++ b/example -@@ -0,0 +1 @@ -+Silly example -diff --git a/hello b/hello -new file mode 100644 -index 0000000..557db03 ---- /dev/null -+++ b/hello -@@ -0,0 +1 @@ -+Hello World -EOF - -test_expect_success 'git whatchanged -p --root' ' - git whatchanged -p --root | - sed -e "1s/^\(.\{7\}\).\{40\}/\1VARIABLE/" \ - -e "2,3s/^\(.\{8\}\).*$/\1VARIABLE/" \ - > whatchanged.output && - test_cmp whatchanged.expect whatchanged.output -' - -test_expect_success 'git tag my-first-tag' ' - git tag my-first-tag && - test_cmp .git/refs/heads/master .git/refs/tags/my-first-tag -' - -test_expect_success 'git checkout -b mybranch' ' - git checkout -b mybranch && - test_cmp .git/refs/heads/master .git/refs/heads/mybranch -' - -cat > branch.expect <<EOF - master -* mybranch -EOF - -test_expect_success 'git branch' ' - git branch > branch.output && - test_cmp branch.expect branch.output -' - -test_expect_success 'git resolve now fails' ' - git checkout mybranch && - echo "Work, work, work" >>hello && - test_tick && - git commit -m "Some work." -i hello && - - git checkout master && - - echo "Play, play, play" >>hello && - echo "Lots of fun" >>example && - test_tick && - git commit -m "Some fun." -i hello example && - - test_must_fail git merge -m "Merge work in mybranch" mybranch -' - -cat > hello << EOF -Hello World -It's a new day for git -Play, play, play -Work, work, work -EOF - -cat > show-branch.expect << EOF -* [master] Merge work in mybranch - ! [mybranch] Some work. --- -- [master] Merge work in mybranch -*+ [mybranch] Some work. -* [master^] Some fun. -EOF - -test_expect_success 'git show-branch' ' - test_tick && - git commit -m "Merge work in mybranch" -i hello && - git show-branch --topo-order --more=1 master mybranch \ - > show-branch.output && - test_cmp show-branch.expect show-branch.output -' - -cat > resolve.expect << EOF -Updating VARIABLE..VARIABLE -FASTFORWARD (no commit created; -m option ignored) - example | 1 + - hello | 1 + - 2 files changed, 2 insertions(+) -EOF - -test_expect_success 'git resolve' ' - git checkout mybranch && - git merge -m "Merge upstream changes." master | - sed -e "1s/[0-9a-f]\{7\}/VARIABLE/g" \ - -e "s/^Fast[- ]forward /FASTFORWARD /" >resolve.output -' - -test_expect_success 'git resolve output' ' - test_i18ncmp resolve.expect resolve.output -' - -cat > show-branch2.expect << EOF -! [master] Merge work in mybranch - * [mybranch] Merge work in mybranch --- --- [master] Merge work in mybranch -EOF - -test_expect_success 'git show-branch (part 2)' ' - git show-branch --topo-order master mybranch > show-branch2.output && - test_cmp show-branch2.expect show-branch2.output -' - -cat > show-branch3.expect << EOF -! [master] Merge work in mybranch - * [mybranch] Merge work in mybranch --- --- [master] Merge work in mybranch -+* [master^2] Some work. -+* [master^] Some fun. -EOF - -test_expect_success 'git show-branch (part 3)' ' - git show-branch --topo-order --more=2 master mybranch \ - > show-branch3.output && - test_cmp show-branch3.expect show-branch3.output -' - -test_expect_success 'rewind to "Some fun." and "Some work."' ' - git checkout mybranch && - git reset --hard master^2 && - git checkout master && - git reset --hard master^ -' - -cat > show-branch4.expect << EOF -* [master] Some fun. - ! [mybranch] Some work. --- -* [master] Some fun. - + [mybranch] Some work. -*+ [master^] Initial commit -EOF - -test_expect_success 'git show-branch (part 4)' ' - git show-branch --topo-order > show-branch4.output && - test_cmp show-branch4.expect show-branch4.output -' - -test_expect_success 'manual merge' ' - mb=$(git merge-base HEAD mybranch) && - git name-rev --name-only --tags $mb > name-rev.output && - test "my-first-tag" = $(cat name-rev.output) && - - git read-tree -m -u $mb HEAD mybranch -' - -cat > ls-files.expect << EOF -100644 7f8b141b65fdcee47321e399a2598a235a032422 0 example -100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1 hello -100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2 hello -100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello -EOF - -test_expect_success 'git ls-files --stage' ' - git ls-files --stage > ls-files.output && - test_cmp ls-files.expect ls-files.output -' - -cat > ls-files-unmerged.expect << EOF -100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1 hello -100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2 hello -100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello -EOF - -test_expect_success 'git ls-files --unmerged' ' - git ls-files --unmerged > ls-files-unmerged.output && - test_cmp ls-files-unmerged.expect ls-files-unmerged.output -' - -test_expect_success 'git-merge-index' ' - test_must_fail git merge-index git-merge-one-file hello -' - -test_expect_success 'git ls-files --stage (part 2)' ' - git ls-files --stage > ls-files.output2 && - test_cmp ls-files.expect ls-files.output2 -' - -test_expect_success 'git repack' 'git repack' -test_expect_success 'git prune-packed' 'git prune-packed' -test_expect_success '-> only packed objects' ' - git prune && # Remove conflict marked blobs - test $(find .git/objects/[0-9a-f][0-9a-f] -type f -print 2>/dev/null | wc -l) = 0 -' - -test_done diff --git a/t/t1300-repo-config.sh b/t/t1300-config.sh index 364a537000..03c223708e 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-config.sh @@ -108,6 +108,7 @@ bar = foo [beta] baz = multiple \ lines +foo = bar EOF test_expect_success 'unset with cont. lines' ' @@ -118,6 +119,7 @@ cat > expect <<\EOF [alpha] bar = foo [beta] +foo = bar EOF test_expect_success 'unset with cont. lines is correct' 'test_cmp expect .git/config' @@ -740,7 +742,7 @@ test_expect_success bool ' do git config --bool --get bool.true$i >>result git config --bool --get bool.false$i >>result - done && + done && test_cmp expect result' test_expect_success 'invalid bool (--get)' ' @@ -901,6 +903,66 @@ test_expect_success 'get --path barfs on boolean variable' ' test_must_fail git config --get --path path.bool ' +test_expect_success 'get --expiry-date' ' + rel="3.weeks.5.days.00:00" && + rel_out="$rel ->" && + cat >.git/config <<-\EOF && + [date] + valid1 = "3.weeks.5.days 00:00" + valid2 = "Fri Jun 4 15:46:55 2010" + valid3 = "2017/11/11 11:11:11PM" + valid4 = "2017/11/10 09:08:07 PM" + valid5 = "never" + invalid1 = "abc" + EOF + cat >expect <<-EOF && + $(test-tool date timestamp $rel) + 1275666415 + 1510441871 + 1510348087 + 0 + EOF + { + echo "$rel_out $(git config --expiry-date date.valid1)" + git config --expiry-date date.valid2 && + git config --expiry-date date.valid3 && + git config --expiry-date date.valid4 && + git config --expiry-date date.valid5 + } >actual && + test_cmp expect actual && + test_must_fail git config --expiry-date date.invalid1 +' + +test_expect_success 'get --type=color' ' + rm .git/config && + git config foo.color "red" && + git config --get --type=color foo.color >actual.raw && + test_decode_color <actual.raw >actual && + echo "<RED>" >expect && + test_cmp expect actual +' + +cat >expect << EOF +[foo] + color = red +EOF + +test_expect_success 'set --type=color' ' + rm .git/config && + git config --type=color foo.color "red" && + test_cmp expect .git/config +' + +test_expect_success 'get --type=color barfs on non-color' ' + echo "[foo]bar=not-a-color" >.git/config && + test_must_fail git config --get --type=color foo.bar +' + +test_expect_success 'set --type=color barfs on non-color' ' + test_must_fail git config --type=color foo.color "not-a-color" 2>error && + test_i18ngrep "cannot parse color" error +' + cat > expect << EOF [quote] leading = " test" @@ -1176,6 +1238,29 @@ test_expect_success 'git -c is not confused by empty environment' ' GIT_CONFIG_PARAMETERS="" git -c x.one=1 config --list ' +sq="'" +test_expect_success 'detect bogus GIT_CONFIG_PARAMETERS' ' + cat >expect <<-\EOF && + env.one one + env.two two + EOF + GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq} ${sq}env.two=two${sq}" \ + git config --get-regexp "env.*" >actual && + test_cmp expect actual && + + cat >expect <<-EOF && + env.one one${sq} + env.two two + EOF + GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq$sq$sq ${sq}env.two=two${sq}" \ + git config --get-regexp "env.*" >actual && + test_cmp expect actual && + + test_must_fail env \ + GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq ${sq}env.two=two${sq}" \ + git config --get-regexp "env.*" +' + test_expect_success 'git config --edit works' ' git config -f tmp test.value no && echo test.value=yes >expect && @@ -1358,7 +1443,7 @@ test_expect_success 'urlmatch with wildcard' ' ' # good section hygiene -test_expect_failure 'unsetting the last key in a section removes header' ' +test_expect_success '--unset last key removes section (except if commented)' ' cat >.git/config <<-\EOF && # some generic comment on the configuration file itself # a comment specific to this "section" section. @@ -1372,13 +1457,86 @@ test_expect_failure 'unsetting the last key in a section removes header' ' cat >expect <<-\EOF && # some generic comment on the configuration file itself + # a comment specific to this "section" section. + [section] + # some intervening lines + # that should also be dropped + + # please be careful when you update the above variable EOF git config --unset section.key && - test_cmp expect .git/config + test_cmp expect .git/config && + + cat >.git/config <<-\EOF && + [section] + key = value + [next-section] + EOF + + cat >expect <<-\EOF && + [next-section] + EOF + + git config --unset section.key && + test_cmp expect .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = "multiline \ + QQ# with comment" + [two] + key = true + EOF + git config --unset two.key && + ! grep two .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = "multiline \ + QQ# with comment" + [one] + key = true + EOF + git config --unset-all one.key && + test_line_count = 0 .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = true + Q# a comment not at the start + [two] + Qkey = true + EOF + git config --unset two.key && + grep two .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = not [two "subsection"] + [two "subsection"] + [two "subsection"] + Qkey = true + [TWO "subsection"] + [one] + EOF + git config --unset two.subsection.key && + test "not [two subsection]" = "$(git config one.key)" && + test_line_count = 3 .git/config +' + +test_expect_success '--unset-all removes section if empty & uncommented' ' + cat >.git/config <<-\EOF && + [section] + key = value1 + key = value2 + EOF + + git config --unset-all section.key && + test_line_count = 0 .git/config ' -test_expect_failure 'adding a key into an empty section reuses header' ' +test_expect_success 'adding a key into an empty section reuses header' ' cat >.git/config <<-\EOF && [section] EOF @@ -1534,10 +1692,10 @@ test_expect_success '--show-origin stdin with file include' ' ' test_expect_success !MINGW '--show-origin blob' ' - cat >expect <<-\EOF && - blob:a9d9f9e555b5c6f07cbe09d3f06fe3df11e09c08 user.custom=true - EOF blob=$(git hash-object -w "$CUSTOM_CONFIG_FILE") && + cat >expect <<-EOF && + blob:$blob user.custom=true + EOF git config --blob=$blob --show-origin --list >output && test_cmp expect output ' @@ -1558,4 +1716,88 @@ test_expect_success '--local requires a repo' ' test_expect_code 128 nongit git config --local foo.bar ' +cat >.git/config <<-\EOF && +[core] +foo = true +number = 10 +big = 1M +EOF + +test_expect_success 'identical modern --type specifiers are allowed' ' + git config --type=int --type=int core.big >actual && + echo 1048576 >expect && + test_cmp expect actual +' + +test_expect_success 'identical legacy --type specifiers are allowed' ' + git config --int --int core.big >actual && + echo 1048576 >expect && + test_cmp expect actual +' + +test_expect_success 'identical mixed --type specifiers are allowed' ' + git config --int --type=int core.big >actual && + echo 1048576 >expect && + test_cmp expect actual +' + +test_expect_success 'non-identical modern --type specifiers are not allowed' ' + test_must_fail git config --type=int --type=bool core.big 2>error && + test_i18ngrep "only one type at a time" error +' + +test_expect_success 'non-identical legacy --type specifiers are not allowed' ' + test_must_fail git config --int --bool core.big 2>error && + test_i18ngrep "only one type at a time" error +' + +test_expect_success 'non-identical mixed --type specifiers are not allowed' ' + test_must_fail git config --type=int --bool core.big 2>error && + test_i18ngrep "only one type at a time" error +' + +test_expect_success '--type allows valid type specifiers' ' + echo "true" >expect && + git config --type=bool core.foo >actual && + test_cmp expect actual +' + +test_expect_success '--no-type unsets type specifiers' ' + echo "10" >expect && + git config --type=bool --no-type core.number >actual && + test_cmp expect actual +' + +test_expect_success 'unset type specifiers may be reset to conflicting ones' ' + echo 1048576 >expect && + git config --type=bool --no-type --type=int core.big >actual && + test_cmp expect actual +' + +test_expect_success '--type rejects unknown specifiers' ' + test_must_fail git config --type=nonsense core.foo 2>error && + test_i18ngrep "unrecognized --type argument" error +' + +test_expect_success '--replace-all does not invent newlines' ' + q_to_tab >.git/config <<-\EOF && + [abc]key + QkeepSection + [xyz] + Qkey = 1 + [abc] + Qkey = a + EOF + q_to_tab >expect <<-\EOF && + [abc] + QkeepSection + [xyz] + Qkey = 1 + [abc] + Qkey = b + EOF + git config --replace-all abc.key b && + test_cmp .git/config expect +' + test_done diff --git a/t/t1304-default-acl.sh b/t/t1304-default-acl.sh index f5422f1d33..335d3f3211 100755 --- a/t/t1304-default-acl.sh +++ b/t/t1304-default-acl.sh @@ -54,7 +54,7 @@ test_expect_success SETFACL 'Setup test repo' ' test_expect_success SETFACL 'Objects creation does not break ACLs with restrictive umask' ' # SHA1 for empty blob - check_perms_and_acl .git/objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391 + check_perms_and_acl .git/objects/$(echo $EMPTY_BLOB | sed -e "s,^\(..\),\1/,") ' test_expect_success SETFACL 'git gc does not break ACLs with restrictive umask' ' diff --git a/t/t1305-config-include.sh b/t/t1305-config-include.sh index d9d2f545a4..f035ee40a3 100755 --- a/t/t1305-config-include.sh +++ b/t/t1305-config-include.sh @@ -224,7 +224,7 @@ test_expect_success 'conditional include, early config reading' ' echo "[includeIf \"gitdir:foo/\"]path=bar6" >>.git/config && echo "[test]six=6" >.git/bar6 && echo 6 >expect && - test-config read_early_config test.six >actual && + test-tool config read_early_config test.six >actual && test_cmp expect actual ) ' diff --git a/t/t1308-config-set.sh b/t/t1308-config-set.sh index bafed5c9b8..3e00d1af01 100755 --- a/t/t1308-config-set.sh +++ b/t/t1308-config-set.sh @@ -18,7 +18,7 @@ check_config () { then printf "%s\n" "$@" fi >expect && - test_expect_code $expect_code test-config "$op" "$key" >actual && + test_expect_code $expect_code test-tool config "$op" "$key" >actual && test_cmp expect actual } @@ -125,7 +125,7 @@ test_expect_success 'find string value for a key' ' ' test_expect_success 'check line error when NULL string is queried' ' - test_expect_code 128 test-config get_string case.foo 2>result && + test_expect_code 128 test-tool config get_string case.foo 2>result && test_i18ngrep "fatal: .*case\.foo.*\.git/config.*line 7" result ' @@ -155,13 +155,13 @@ test_expect_success 'find value from a configset' ' baz = ball EOF echo silk >expect && - test-config configset_get_value my.new config2 .git/config >actual && + test-tool config configset_get_value my.new config2 .git/config >actual && test_cmp expect actual ' test_expect_success 'find value with highest priority from a configset' ' echo hask >expect && - test-config configset_get_value case.baz config2 .git/config >actual && + test-tool config configset_get_value case.baz config2 .git/config >actual && test_cmp expect actual ' @@ -173,20 +173,20 @@ test_expect_success 'find value_list for a key from a configset' ' lama ball EOF - test-config configset_get_value case.baz config2 .git/config >actual && + test-tool config configset_get_value case.baz config2 .git/config >actual && test_cmp expect actual ' test_expect_success 'proper error on non-existent files' ' echo "Error (-1) reading configuration file non-existent-file." >expect && - test_expect_code 2 test-config configset_get_value foo.bar non-existent-file 2>actual && + test_expect_code 2 test-tool config configset_get_value foo.bar non-existent-file 2>actual && test_cmp expect actual ' test_expect_success 'proper error on directory "files"' ' echo "Error (-1) reading configuration file a-directory." >expect && mkdir a-directory && - test_expect_code 2 test-config configset_get_value foo.bar a-directory 2>output && + test_expect_code 2 test-tool config configset_get_value foo.bar a-directory 2>output && grep "^warning:" output && grep "^Error" output >actual && test_cmp expect actual @@ -196,7 +196,7 @@ test_expect_success POSIXPERM,SANITY 'proper error on non-accessible files' ' chmod -r .git/config && test_when_finished "chmod +r .git/config" && echo "Error (-1) reading configuration file .git/config." >expect && - test_expect_code 2 test-config configset_get_value foo.bar .git/config 2>output && + test_expect_code 2 test-tool config configset_get_value foo.bar .git/config 2>output && grep "^warning:" output && grep "^Error" output >actual && test_cmp expect actual @@ -207,14 +207,14 @@ test_expect_success 'proper error on error in default config files' ' test_when_finished "mv .git/config.old .git/config" && echo "[" >>.git/config && echo "fatal: bad config line 34 in file .git/config" >expect && - test_expect_code 128 test-config get_value foo.bar 2>actual && + test_expect_code 128 test-tool config get_value foo.bar 2>actual && test_i18ncmp expect actual ' test_expect_success 'proper error on error in custom config files' ' echo "[" >>syntax-error && echo "fatal: bad config line 1 in file syntax-error" >expect && - test_expect_code 128 test-config configset_get_value foo.bar syntax-error 2>actual && + test_expect_code 128 test-tool config configset_get_value foo.bar syntax-error 2>actual && test_i18ncmp expect actual ' @@ -267,7 +267,7 @@ test_expect_success 'iteration shows correct origins' ' name= scope=cmdline EOF - GIT_CONFIG_PARAMETERS=$cmdline_config test-config iterate >actual && + GIT_CONFIG_PARAMETERS=$cmdline_config test-tool config iterate >actual && test_cmp expect actual ' diff --git a/t/t1309-early-config.sh b/t/t1309-early-config.sh index 3dda215e8e..413642aa56 100755 --- a/t/t1309-early-config.sh +++ b/t/t1309-early-config.sh @@ -6,7 +6,7 @@ test_description='Test read_early_config()' test_expect_success 'read early config' ' test_config early.config correct && - test-config read_early_config early.config >output && + test-tool config read_early_config early.config >output && test correct = "$(cat output)" ' @@ -15,7 +15,7 @@ test_expect_success 'in a sub-directory' ' mkdir -p sub && ( cd sub && - test-config read_early_config early.config + test-tool config read_early_config early.config ) >output && test sub = "$(cat output)" ' @@ -27,7 +27,7 @@ test_expect_success 'ceiling' ' GIT_CEILING_DIRECTORIES="$PWD" && export GIT_CEILING_DIRECTORIES && cd sub && - test-config read_early_config early.config + test-tool config read_early_config early.config ) >output && test -z "$(cat output)" ' @@ -42,7 +42,7 @@ test_expect_success 'ceiling #2' ' GIT_CEILING_DIRECTORIES="$PWD" && export GIT_CEILING_DIRECTORIES XDG_CONFIG_HOME && cd sub && - test-config read_early_config early.config + test-tool config read_early_config early.config ) >output && test xdg = "$(cat output)" ' @@ -54,7 +54,7 @@ test_expect_success 'read config file in right order' ' ( cd foo && echo "[test]source = repo" >>.git/config && - GIT_CONFIG_PARAMETERS=$cmdline_config test-config \ + GIT_CONFIG_PARAMETERS=$cmdline_config test-tool config \ read_early_config test.source >actual && cat >expected <<-\EOF && home @@ -71,7 +71,7 @@ test_with_config () { ( cd throwaway && echo "$*" >.git/config && - test-config read_early_config early.config + test-tool config read_early_config early.config ) } diff --git a/t/t1310-config-default.sh b/t/t1310-config-default.sh new file mode 100755 index 0000000000..6049d91708 --- /dev/null +++ b/t/t1310-config-default.sh @@ -0,0 +1,36 @@ +#!/bin/sh + +test_description='Test git config in different settings (with --default)' + +. ./test-lib.sh + +test_expect_success 'uses --default when entry missing' ' + echo quux >expect && + git config -f config --default=quux core.foo >actual && + test_cmp expect actual +' + +test_expect_success 'does not use --default when entry present' ' + echo bar >expect && + git -c core.foo=bar config --default=baz core.foo >actual && + test_cmp expect actual +' + +test_expect_success 'canonicalizes --default with appropriate type' ' + echo true >expect && + git config -f config --default=yes --bool core.foo >actual && + test_cmp expect actual +' + +test_expect_success 'dies when --default cannot be parsed' ' + test_must_fail git config -f config --type=expiry-date --default=x --get \ + not.a.section 2>error && + test_i18ngrep "failed to format default config value" error +' + +test_expect_success 'does not allow --default without --get' ' + test_must_fail git config --default=quux --unset a.section >output 2>&1 && + test_i18ngrep "\-\-default is only applicable to" output +' + +test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index dc98b4bc6d..664a3a4e4e 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -1253,7 +1253,10 @@ run_with_limited_open_files () { (ulimit -n 32 && "$@") } -test_lazy_prereq ULIMIT_FILE_DESCRIPTORS 'run_with_limited_open_files true' +test_lazy_prereq ULIMIT_FILE_DESCRIPTORS ' + test_have_prereq !MINGW,!CYGWIN && + run_with_limited_open_files true +' test_expect_success ULIMIT_FILE_DESCRIPTORS 'large transaction creating branches does not burst open file limit' ' ( diff --git a/t/t1401-symbolic-ref.sh b/t/t1401-symbolic-ref.sh index eec3e90f9c..9e782a8122 100755 --- a/t/t1401-symbolic-ref.sh +++ b/t/t1401-symbolic-ref.sh @@ -129,11 +129,35 @@ test_expect_success 'symbolic-ref does not create ref d/f conflicts' ' test_must_fail git symbolic-ref refs/heads/df/conflict refs/heads/df ' -test_expect_success 'symbolic-ref handles existing pointer to invalid name' ' +test_expect_success 'symbolic-ref can overwrite pointer to invalid name' ' + test_when_finished reset_to_sane && head=$(git rev-parse HEAD) && git symbolic-ref HEAD refs/heads/outer && + test_when_finished "git update-ref -d refs/heads/outer/inner" && git update-ref refs/heads/outer/inner $head && git symbolic-ref HEAD refs/heads/unrelated ' +test_expect_success 'symbolic-ref can resolve d/f name (EISDIR)' ' + test_when_finished reset_to_sane && + head=$(git rev-parse HEAD) && + git symbolic-ref HEAD refs/heads/outer/inner && + test_when_finished "git update-ref -d refs/heads/outer" && + git update-ref refs/heads/outer $head && + echo refs/heads/outer/inner >expect && + git symbolic-ref HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'symbolic-ref can resolve d/f name (ENOTDIR)' ' + test_when_finished reset_to_sane && + head=$(git rev-parse HEAD) && + git symbolic-ref HEAD refs/heads/outer && + test_when_finished "git update-ref -d refs/heads/outer/inner" && + git update-ref refs/heads/outer/inner $head && + echo refs/heads/outer >expect && + git symbolic-ref HEAD >actual && + test_cmp expect actual +' + test_done diff --git a/t/t1402-check-ref-format.sh b/t/t1402-check-ref-format.sh index 0790edf60d..98e4a8613b 100755 --- a/t/t1402-check-ref-format.sh +++ b/t/t1402-check-ref-format.sh @@ -144,6 +144,11 @@ test_expect_success "check-ref-format --branch @{-1}" ' refname2=$(git check-ref-format --branch @{-2}) && test "$refname2" = master' +test_expect_success 'check-ref-format --branch -naster' ' + test_must_fail git check-ref-format --branch -naster >actual && + test_must_be_empty actual +' + test_expect_success 'check-ref-format --branch from subdir' ' mkdir subdir && @@ -161,6 +166,17 @@ test_expect_success 'check-ref-format --branch from subdir' ' test "$refname" = "$sha1" ' +test_expect_success 'check-ref-format --branch @{-1} from non-repo' ' + nongit test_must_fail git check-ref-format --branch @{-1} >actual && + test_must_be_empty actual +' + +test_expect_success 'check-ref-format --branch master from non-repo' ' + echo master >expect && + nongit git check-ref-format --branch master >actual && + test_cmp expect actual +' + valid_ref_normalized() { prereq= case $1 in diff --git a/t/t1404-update-ref-errors.sh b/t/t1404-update-ref-errors.sh index c34ece48f5..3a887b5113 100755 --- a/t/t1404-update-ref-errors.sh +++ b/t/t1404-update-ref-errors.sh @@ -34,6 +34,81 @@ test_update_rejected () { Q="'" +# Test adding and deleting D/F-conflicting references in a single +# transaction. +df_test() { + prefix="$1" + pack=: symadd=false symdel=false add_del=false addref= delref= + shift + while test $# -gt 0 + do + case "$1" in + --pack) + pack="git pack-refs --all" + shift + ;; + --sym-add) + # Perform the add via a symbolic reference + symadd=true + shift + ;; + --sym-del) + # Perform the del via a symbolic reference + symdel=true + shift + ;; + --del-add) + # Delete first reference then add second + add_del=false + delref="$prefix/r/$2" + addref="$prefix/r/$3" + shift 3 + ;; + --add-del) + # Add first reference then delete second + add_del=true + addref="$prefix/r/$2" + delref="$prefix/r/$3" + shift 3 + ;; + *) + echo 1>&2 "Extra args to df_test: $*" + return 1 + ;; + esac + done + git update-ref "$delref" $C && + if $symadd + then + addname="$prefix/s/symadd" && + git symbolic-ref "$addname" "$addref" + else + addname="$addref" + fi && + if $symdel + then + delname="$prefix/s/symdel" && + git symbolic-ref "$delname" "$delref" + else + delname="$delref" + fi && + cat >expected-err <<-EOF && + fatal: cannot lock ref $Q$addname$Q: $Q$delref$Q exists; cannot create $Q$addref$Q + EOF + $pack && + if $add_del + then + printf "%s\n" "create $addname $D" "delete $delname" + else + printf "%s\n" "delete $delname" "create $addname $D" + fi >commands && + test_must_fail git update-ref --stdin <commands 2>output.err && + test_cmp expected-err output.err && + printf "%s\n" "$C $delref" >expected-refs && + git for-each-ref --format="%(objectname) %(refname)" $prefix/r >actual-refs && + test_cmp expected-refs actual-refs +} + test_expect_success 'setup' ' git commit --allow-empty -m Initial && @@ -188,6 +263,72 @@ test_expect_success 'empty directory should not fool 1-arg delete' ' git update-ref --stdin ' +test_expect_success 'D/F conflict prevents add long + delete short' ' + df_test refs/df-al-ds --add-del foo/bar foo +' + +test_expect_success 'D/F conflict prevents add short + delete long' ' + df_test refs/df-as-dl --add-del foo foo/bar +' + +test_expect_success 'D/F conflict prevents delete long + add short' ' + df_test refs/df-dl-as --del-add foo/bar foo +' + +test_expect_success 'D/F conflict prevents delete short + add long' ' + df_test refs/df-ds-al --del-add foo foo/bar +' + +test_expect_success 'D/F conflict prevents add long + delete short packed' ' + df_test refs/df-al-dsp --pack --add-del foo/bar foo +' + +test_expect_success 'D/F conflict prevents add short + delete long packed' ' + df_test refs/df-as-dlp --pack --add-del foo foo/bar +' + +test_expect_success 'D/F conflict prevents delete long packed + add short' ' + df_test refs/df-dlp-as --pack --del-add foo/bar foo +' + +test_expect_success 'D/F conflict prevents delete short packed + add long' ' + df_test refs/df-dsp-al --pack --del-add foo foo/bar +' + +# Try some combinations involving symbolic refs... + +test_expect_success 'D/F conflict prevents indirect add long + delete short' ' + df_test refs/df-ial-ds --sym-add --add-del foo/bar foo +' + +test_expect_success 'D/F conflict prevents indirect add long + indirect delete short' ' + df_test refs/df-ial-ids --sym-add --sym-del --add-del foo/bar foo +' + +test_expect_success 'D/F conflict prevents indirect add short + indirect delete long' ' + df_test refs/df-ias-idl --sym-add --sym-del --add-del foo foo/bar +' + +test_expect_success 'D/F conflict prevents indirect delete long + indirect add short' ' + df_test refs/df-idl-ias --sym-add --sym-del --del-add foo/bar foo +' + +test_expect_success 'D/F conflict prevents indirect add long + delete short packed' ' + df_test refs/df-ial-dsp --sym-add --pack --add-del foo/bar foo +' + +test_expect_success 'D/F conflict prevents indirect add long + indirect delete short packed' ' + df_test refs/df-ial-idsp --sym-add --sym-del --pack --add-del foo/bar foo +' + +test_expect_success 'D/F conflict prevents add long + indirect delete short packed' ' + df_test refs/df-al-idsp --sym-del --pack --add-del foo/bar foo +' + +test_expect_success 'D/F conflict prevents indirect delete long packed + indirect add short' ' + df_test refs/df-idlp-ias --sym-add --sym-del --pack --del-add foo/bar foo +' + # Test various errors when reading the old values of references... test_expect_success 'missing old value blocks update' ' @@ -404,4 +545,77 @@ test_expect_success 'broken reference blocks indirect create' ' test_cmp expected output.err ' +test_expect_success 'no bogus intermediate values during delete' ' + prefix=refs/slow-transaction && + # Set up a reference with differing loose and packed versions: + git update-ref $prefix/foo $C && + git pack-refs --all && + git update-ref $prefix/foo $D && + git for-each-ref $prefix >unchanged && + # Now try to update the reference, but hold the `packed-refs` lock + # for a while to see what happens while the process is blocked: + : >.git/packed-refs.lock && + test_when_finished "rm -f .git/packed-refs.lock" && + { + # Note: the following command is intentionally run in the + # background. We increase the timeout so that `update-ref` + # attempts to acquire the `packed-refs` lock for longer than + # it takes for us to do the check then delete it: + git -c core.packedrefstimeout=3000 update-ref -d $prefix/foo & + } && + pid2=$! && + # Give update-ref plenty of time to get to the point where it tries + # to lock packed-refs: + sleep 1 && + # Make sure that update-ref did not complete despite the lock: + kill -0 $pid2 && + # Verify that the reference still has its old value: + sha1=$(git rev-parse --verify --quiet $prefix/foo || echo undefined) && + case "$sha1" in + $D) + # This is what we hope for; it means that nothing + # user-visible has changed yet. + : ;; + undefined) + # This is not correct; it means the deletion has happened + # already even though update-ref should not have been + # able to acquire the lock yet. + echo "$prefix/foo deleted prematurely" && + break + ;; + $C) + # This value should never be seen. Probably the loose + # reference has been deleted but the packed reference + # is still there: + echo "$prefix/foo incorrectly observed to be C" && + break + ;; + *) + # WTF? + echo "unexpected value observed for $prefix/foo: $sha1" && + break + ;; + esac >out && + rm -f .git/packed-refs.lock && + wait $pid2 && + test_must_be_empty out && + test_must_fail git rev-parse --verify --quiet $prefix/foo +' + +test_expect_success 'delete fails cleanly if packed-refs file is locked' ' + prefix=refs/locked-packed-refs && + # Set up a reference with differing loose and packed versions: + git update-ref $prefix/foo $C && + git pack-refs --all && + git update-ref $prefix/foo $D && + git for-each-ref $prefix >unchanged && + # Now try to delete it while the `packed-refs` lock is held: + : >.git/packed-refs.lock && + test_when_finished "rm -f .git/packed-refs.lock" && + test_must_fail git update-ref -d $prefix/foo >out 2>err && + git for-each-ref $prefix >actual && + test_i18ngrep "Unable to create $Q.*packed-refs.lock$Q: File exists" err && + test_cmp unchanged actual +' + test_done diff --git a/t/t1405-main-ref-store.sh b/t/t1405-main-ref-store.sh index e8115df5ba..a74c38b5fb 100755 --- a/t/t1405-main-ref-store.sh +++ b/t/t1405-main-ref-store.sh @@ -4,7 +4,7 @@ test_description='test main ref store api' . ./test-lib.sh -RUN="test-ref-store main" +RUN="test-tool ref-store main" test_expect_success 'pack_refs(PACK_REFS_ALL | PACK_REFS_PRUNE)' ' test_commit one && @@ -45,7 +45,7 @@ test_expect_success 'rename_refs(master, new-master)' ' ' test_expect_success 'for_each_ref(refs/heads/)' ' - $RUN for-each-ref refs/heads/ | cut -c 42- >actual && + $RUN for-each-ref refs/heads/ | cut -d" " -f 2- >actual && cat >expected <<-\EOF && master 0x0 new-master 0x0 @@ -71,7 +71,7 @@ test_expect_success 'verify_ref(new-master)' ' ' test_expect_success 'for_each_reflog()' ' - $RUN for-each-reflog | sort | cut -c 42- >actual && + $RUN for-each-reflog | sort -k2 | cut -c 42- >actual && cat >expected <<-\EOF && HEAD 0x1 refs/heads/master 0x0 diff --git a/t/t1406-submodule-ref-store.sh b/t/t1406-submodule-ref-store.sh index c32d4cc465..e093782cc3 100755 --- a/t/t1406-submodule-ref-store.sh +++ b/t/t1406-submodule-ref-store.sh @@ -4,7 +4,7 @@ test_description='test submodule ref store api' . ./test-lib.sh -RUN="test-ref-store submodule:sub" +RUN="test-tool ref-store submodule:sub" test_expect_success 'setup' ' git init sub && diff --git a/t/t1407-worktree-ref-store.sh b/t/t1407-worktree-ref-store.sh index 5df06f3556..2211f9831f 100755 --- a/t/t1407-worktree-ref-store.sh +++ b/t/t1407-worktree-ref-store.sh @@ -4,8 +4,8 @@ test_description='test worktree ref store api' . ./test-lib.sh -RWT="test-ref-store worktree:wt" -RMAIN="test-ref-store worktree:main" +RWT="test-tool ref-store worktree:wt" +RMAIN="test-tool ref-store worktree:main" test_expect_success 'setup' ' test_commit first && @@ -49,4 +49,34 @@ test_expect_success 'create_symref(FOO, refs/heads/master)' ' test_cmp expected actual ' +test_expect_success 'for_each_reflog()' ' + echo $_z40 > .git/logs/PSEUDO-MAIN && + mkdir -p .git/logs/refs/bisect && + echo $_z40 > .git/logs/refs/bisect/random && + + echo $_z40 > .git/worktrees/wt/logs/PSEUDO-WT && + mkdir -p .git/worktrees/wt/logs/refs/bisect && + echo $_z40 > .git/worktrees/wt/logs/refs/bisect/wt-random && + + $RWT for-each-reflog | cut -c 42- | sort >actual && + cat >expected <<-\EOF && + HEAD 0x1 + PSEUDO-WT 0x0 + refs/bisect/wt-random 0x0 + refs/heads/master 0x0 + refs/heads/wt-master 0x0 + EOF + test_cmp expected actual && + + $RMAIN for-each-reflog | cut -c 42- | sort >actual && + cat >expected <<-\EOF && + HEAD 0x1 + PSEUDO-MAIN 0x0 + refs/bisect/random 0x0 + refs/heads/master 0x0 + refs/heads/wt-master 0x0 + EOF + test_cmp expected actual +' + test_done diff --git a/t/t1408-packed-refs.sh b/t/t1408-packed-refs.sh new file mode 100755 index 0000000000..1e44a17eea --- /dev/null +++ b/t/t1408-packed-refs.sh @@ -0,0 +1,42 @@ +#!/bin/sh + +test_description='packed-refs entries are covered by loose refs' + +. ./test-lib.sh + +test_expect_success setup ' + test_tick && + git commit --allow-empty -m one && + one=$(git rev-parse HEAD) && + git for-each-ref >actual && + echo "$one commit refs/heads/master" >expect && + test_cmp expect actual && + + git pack-refs --all && + git for-each-ref >actual && + echo "$one commit refs/heads/master" >expect && + test_cmp expect actual && + + git checkout --orphan another && + test_tick && + git commit --allow-empty -m two && + two=$(git rev-parse HEAD) && + git checkout -B master && + git branch -D another && + + git for-each-ref >actual && + echo "$two commit refs/heads/master" >expect && + test_cmp expect actual && + + git reflog expire --expire=now --all && + git prune && + git tag -m v1.0 v1.0 master +' + +test_expect_success 'no error from stale entry in packed-refs' ' + git describe master >actual 2>&1 && + echo "v1.0" >expect && + test_cmp expect actual +' + +test_done diff --git a/t/t1409-avoid-packing-refs.sh b/t/t1409-avoid-packing-refs.sh new file mode 100755 index 0000000000..e5cb8a252d --- /dev/null +++ b/t/t1409-avoid-packing-refs.sh @@ -0,0 +1,118 @@ +#!/bin/sh + +test_description='avoid rewriting packed-refs unnecessarily' + +. ./test-lib.sh + +# Add an identifying mark to the packed-refs file header line. This +# shouldn't upset readers, and it should be omitted if the file is +# ever rewritten. +mark_packed_refs () { + sed -e "s/^\(#.*\)/\1 t1409 /" <.git/packed-refs >.git/packed-refs.new && + mv .git/packed-refs.new .git/packed-refs +} + +# Verify that the packed-refs file is still marked. +check_packed_refs_marked () { + grep -q '^#.* t1409 ' .git/packed-refs +} + +test_expect_success 'setup' ' + git commit --allow-empty -m "Commit A" && + A=$(git rev-parse HEAD) && + git commit --allow-empty -m "Commit B" && + B=$(git rev-parse HEAD) && + git commit --allow-empty -m "Commit C" && + C=$(git rev-parse HEAD) +' + +test_expect_success 'do not create packed-refs file gratuitously' ' + test_must_fail test -f .git/packed-refs && + git update-ref refs/heads/foo $A && + test_must_fail test -f .git/packed-refs && + git update-ref refs/heads/foo $B && + test_must_fail test -f .git/packed-refs && + git update-ref refs/heads/foo $C $B && + test_must_fail test -f .git/packed-refs && + git update-ref -d refs/heads/foo && + test_must_fail test -f .git/packed-refs +' + +test_expect_success 'check that marking the packed-refs file works' ' + git for-each-ref >expected && + git pack-refs --all && + mark_packed_refs && + check_packed_refs_marked && + git for-each-ref >actual && + test_cmp expected actual && + git pack-refs --all && + test_must_fail check_packed_refs_marked && + git for-each-ref >actual2 && + test_cmp expected actual2 +' + +test_expect_success 'leave packed-refs untouched on update of packed' ' + git update-ref refs/heads/packed-update $A && + git pack-refs --all && + mark_packed_refs && + git update-ref refs/heads/packed-update $B && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on checked update of packed' ' + git update-ref refs/heads/packed-checked-update $A && + git pack-refs --all && + mark_packed_refs && + git update-ref refs/heads/packed-checked-update $B $A && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on verify of packed' ' + git update-ref refs/heads/packed-verify $A && + git pack-refs --all && + mark_packed_refs && + echo "verify refs/heads/packed-verify $A" | git update-ref --stdin && + check_packed_refs_marked +' + +test_expect_success 'touch packed-refs on delete of packed' ' + git update-ref refs/heads/packed-delete $A && + git pack-refs --all && + mark_packed_refs && + git update-ref -d refs/heads/packed-delete && + test_must_fail check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on update of loose' ' + git pack-refs --all && + git update-ref refs/heads/loose-update $A && + mark_packed_refs && + git update-ref refs/heads/loose-update $B && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on checked update of loose' ' + git pack-refs --all && + git update-ref refs/heads/loose-checked-update $A && + mark_packed_refs && + git update-ref refs/heads/loose-checked-update $B $A && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on verify of loose' ' + git pack-refs --all && + git update-ref refs/heads/loose-verify $A && + mark_packed_refs && + echo "verify refs/heads/loose-verify $A" | git update-ref --stdin && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on delete of loose' ' + git pack-refs --all && + git update-ref refs/heads/loose-delete $A && + mark_packed_refs && + git update-ref -d refs/heads/loose-delete && + check_packed_refs_marked +' + +test_done diff --git a/t/t1411-reflog-show.sh b/t/t1411-reflog-show.sh index 6ac7734d79..596907758d 100755 --- a/t/t1411-reflog-show.sh +++ b/t/t1411-reflog-show.sh @@ -10,6 +10,7 @@ test_expect_success 'setup' ' git commit -m one ' +commit=$(git rev-parse --short HEAD) cat >expect <<'EOF' Reflog: HEAD@{0} (C O Mitter <committer@example.com>) Reflog message: commit (initial): one @@ -20,8 +21,8 @@ test_expect_success 'log -g shows reflog headers' ' test_cmp expect actual ' -cat >expect <<'EOF' -e46513e HEAD@{0}: commit (initial): one +cat >expect <<EOF +$commit HEAD@{0}: commit (initial): one EOF test_expect_success 'oneline reflog format' ' git log -g -1 --oneline >actual && @@ -33,8 +34,8 @@ test_expect_success 'reflog default format' ' test_cmp expect actual ' -cat >expect <<'EOF' -commit e46513e +cat >expect <<EOF +commit $commit Reflog: HEAD@{0} (C O Mitter <committer@example.com>) Reflog message: commit (initial): one Author: A U Thor <author@example.com> @@ -56,8 +57,8 @@ test_expect_success 'using @{now} syntax shows reflog date (multiline)' ' test_cmp expect actual ' -cat >expect <<'EOF' -e46513e HEAD@{Thu Apr 7 15:13:13 2005 -0700}: commit (initial): one +cat >expect <<EOF +$commit HEAD@{Thu Apr 7 15:13:13 2005 -0700}: commit (initial): one EOF test_expect_success 'using @{now} syntax shows reflog date (oneline)' ' git log -g -1 --oneline HEAD@{now} >actual && @@ -82,8 +83,8 @@ test_expect_success 'using --date= shows reflog date (multiline)' ' test_cmp expect actual ' -cat >expect <<'EOF' -e46513e HEAD@{Thu Apr 7 15:13:13 2005 -0700}: commit (initial): one +cat >expect <<EOF +$commit HEAD@{Thu Apr 7 15:13:13 2005 -0700}: commit (initial): one EOF test_expect_success 'using --date= shows reflog date (oneline)' ' git log -g -1 --oneline --date=default >actual && @@ -109,8 +110,8 @@ test_expect_success 'log.date does not invoke "--date" magic (multiline)' ' test_cmp expect actual ' -cat >expect <<'EOF' -e46513e HEAD@{0}: commit (initial): one +cat >expect <<EOF +$commit HEAD@{0}: commit (initial): one EOF test_expect_success 'log.date does not invoke "--date" magic (oneline)' ' test_config log.date raw && diff --git a/t/t1430-bad-ref-name.sh b/t/t1430-bad-ref-name.sh index e88349c8a0..c7878a60ed 100755 --- a/t/t1430-bad-ref-name.sh +++ b/t/t1430-bad-ref-name.sh @@ -331,4 +331,47 @@ test_expect_success 'update-ref --stdin -z fails delete with bad ref name' ' grep "fatal: invalid ref format: ~a" err ' +test_expect_success 'branch rejects HEAD as a branch name' ' + test_must_fail git branch HEAD HEAD^ && + test_must_fail git show-ref refs/heads/HEAD +' + +test_expect_success 'checkout -b rejects HEAD as a branch name' ' + test_must_fail git checkout -B HEAD HEAD^ && + test_must_fail git show-ref refs/heads/HEAD +' + +test_expect_success 'update-ref can operate on refs/heads/HEAD' ' + git update-ref refs/heads/HEAD HEAD^ && + git show-ref refs/heads/HEAD && + git update-ref -d refs/heads/HEAD && + test_must_fail git show-ref refs/heads/HEAD +' + +test_expect_success 'branch -d can remove refs/heads/HEAD' ' + git update-ref refs/heads/HEAD HEAD^ && + git branch -d HEAD && + test_must_fail git show-ref refs/heads/HEAD +' + +test_expect_success 'branch -m can rename refs/heads/HEAD' ' + git update-ref refs/heads/HEAD HEAD^ && + git branch -m HEAD tail && + test_must_fail git show-ref refs/heads/HEAD && + git show-ref refs/heads/tail +' + +test_expect_success 'branch -d can remove refs/heads/-dash' ' + git update-ref refs/heads/-dash HEAD^ && + git branch -d -- -dash && + test_must_fail git show-ref refs/heads/-dash +' + +test_expect_success 'branch -m can rename refs/heads/-dash' ' + git update-ref refs/heads/-dash HEAD^ && + git branch -m -- -dash dash && + test_must_fail git show-ref refs/heads/-dash && + git show-ref refs/heads/dash +' + test_done diff --git a/t/t1500-rev-parse.sh b/t/t1500-rev-parse.sh index 03d3c7f6d6..5c715fe2cf 100755 --- a/t/t1500-rev-parse.sh +++ b/t/t1500-rev-parse.sh @@ -116,6 +116,21 @@ test_expect_success 'git-path inside sub-dir' ' test_cmp expect actual ' +test_expect_success 'rev-parse --is-shallow-repository in shallow repo' ' + test_commit test_commit && + echo true >expect && + git clone --depth 1 --no-local . shallow && + test_when_finished "rm -rf shallow" && + git -C shallow rev-parse --is-shallow-repository >actual && + test_cmp expect actual +' + +test_expect_success 'rev-parse --is-shallow-repository in non-shallow repo' ' + echo false >expect && + git rev-parse --is-shallow-repository >actual && + test_cmp expect actual +' + test_expect_success 'showing the superproject correctly' ' git rev-parse --show-superproject-working-tree >out && test_must_be_empty out && diff --git a/t/t1501-work-tree.sh b/t/t1501-work-tree.sh index b06210ec5e..9c0bc65250 100755 --- a/t/t1501-work-tree.sh +++ b/t/t1501-work-tree.sh @@ -341,7 +341,7 @@ test_expect_success 'make_relative_path handles double slashes in GIT_DIR' ' test_expect_success 'relative $GIT_WORK_TREE and git subprocesses' ' GIT_DIR=repo.git GIT_WORK_TREE=repo.git/work \ - test-subprocess --setup-work-tree rev-parse --show-toplevel >actual && + test-tool subprocess --setup-work-tree rev-parse --show-toplevel >actual && echo "$(pwd)/repo.git/work" >expected && test_cmp expected actual ' @@ -360,7 +360,7 @@ test_expect_success 'GIT_DIR set (1)' ' ( cd work && GIT_DIR=../gitfile git rev-parse --git-common-dir >actual && - test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test-tool path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && test_cmp expect actual ) ' @@ -371,7 +371,7 @@ test_expect_success 'GIT_DIR set (2)' ' ( cd work && GIT_DIR=../gitfile git rev-parse --git-common-dir >actual && - test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test-tool path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && test_cmp expect actual ) ' @@ -382,7 +382,7 @@ test_expect_success 'Auto discovery' ' ( cd work && git rev-parse --git-common-dir >actual && - test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test-tool path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && test_cmp expect actual && echo haha >data1 && git add data1 && @@ -400,7 +400,7 @@ test_expect_success '$GIT_DIR/common overrides core.worktree' ' ( cd work && git rev-parse --git-common-dir >actual && - test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test-tool path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && test_cmp expect actual && echo haha >data2 && git add data2 && @@ -431,4 +431,16 @@ test_expect_success 'error out gracefully on invalid $GIT_WORK_TREE' ' ) ' +test_expect_success 'refs work with relative gitdir and work tree' ' + git init relative && + git -C relative commit --allow-empty -m one && + git -C relative commit --allow-empty -m two && + + GIT_DIR=relative/.git GIT_WORK_TREE=relative git reset HEAD^ && + + git -C relative log -1 --format=%s >actual && + echo one >expect && + test_cmp expect actual +' + test_done diff --git a/t/t1502-rev-parse-parseopt.sh b/t/t1502-rev-parse-parseopt.sh index 310f93fd30..a859abedf5 100755 --- a/t/t1502-rev-parse-parseopt.sh +++ b/t/t1502-rev-parse-parseopt.sh @@ -28,6 +28,9 @@ test_expect_success 'setup optionspec' ' |g,fluf?path short and long option optional argument |longest=very-long-argument-hint a very long argument hint |pair=key=value with an equals sign in the hint +|aswitch help te=t contains? fl*g characters!` +|bswitch=hint hint has trailing tab character +|cswitch switch has trailing tab character |short-hint=a with a one symbol hint | |Extras @@ -35,6 +38,25 @@ test_expect_success 'setup optionspec' ' EOF ' +test_expect_success 'setup optionspec-no-switches' ' + sed -e "s/^|//" >optionspec_no_switches <<\EOF +|some-command [options] <args>... +| +|some-command does foo and bar! +|-- +EOF +' + +test_expect_success 'setup optionspec-only-hidden-switches' ' + sed -e "s/^|//" >optionspec_only_hidden_switches <<\EOF +|some-command [options] <args>... +| +|some-command does foo and bar! +|-- +|hidden1* A hidden switch +EOF +' + test_expect_success 'test --parseopt help output' ' sed -e "s/^|//" >expect <<\END_EXPECT && |cat <<\EOF @@ -62,6 +84,9 @@ test_expect_success 'test --parseopt help output' ' | --longest <very-long-argument-hint> | a very long argument hint | --pair <key=value> with an equals sign in the hint +| --aswitch help te=t contains? fl*g characters!` +| --bswitch <hint> hint has trailing tab character +| --cswitch switch has trailing tab character | --short-hint <a> with a one symbol hint | |Extras @@ -73,19 +98,100 @@ END_EXPECT test_i18ncmp expect output ' +test_expect_success 'test --parseopt help output no switches' ' + sed -e "s/^|//" >expect <<\END_EXPECT && +|cat <<\EOF +|usage: some-command [options] <args>... +| +| some-command does foo and bar! +| +|EOF +END_EXPECT + test_expect_code 129 git rev-parse --parseopt -- -h > output < optionspec_no_switches && + test_i18ncmp expect output +' + +test_expect_success 'test --parseopt help output hidden switches' ' + sed -e "s/^|//" >expect <<\END_EXPECT && +|cat <<\EOF +|usage: some-command [options] <args>... +| +| some-command does foo and bar! +| +|EOF +END_EXPECT + test_expect_code 129 git rev-parse --parseopt -- -h > output < optionspec_only_hidden_switches && + test_i18ncmp expect output +' + +test_expect_success 'test --parseopt help-all output hidden switches' ' + sed -e "s/^|//" >expect <<\END_EXPECT && +|cat <<\EOF +|usage: some-command [options] <args>... +| +| some-command does foo and bar! +| +| --hidden1 A hidden switch +| +|EOF +END_EXPECT + test_expect_code 129 git rev-parse --parseopt -- --help-all > output < optionspec_only_hidden_switches && + test_i18ncmp expect output +' + +test_expect_success 'test --parseopt invalid switch help output' ' + sed -e "s/^|//" >expect <<\END_EXPECT && +|error: unknown option `does-not-exist'\'' +|usage: some-command [options] <args>... +| +| some-command does foo and bar! +| +| -h, --help show the help +| --foo some nifty option --foo +| --bar ... some cool option --bar with an argument +| -b, --baz a short and long option +| +|An option group Header +| -C[...] option C with an optional argument +| -d, --data[=...] short and long option with an optional argument +| +|Argument hints +| -B <arg> short option required argument +| --bar2 <arg> long option required argument +| -e, --fuz <with-space> +| short and long option required argument +| -s[<some>] short option optional argument +| --long[=<data>] long option optional argument +| -g, --fluf[=<path>] short and long option optional argument +| --longest <very-long-argument-hint> +| a very long argument hint +| --pair <key=value> with an equals sign in the hint +| --aswitch help te=t contains? fl*g characters!` +| --bswitch <hint> hint has trailing tab character +| --cswitch switch has trailing tab character +| --short-hint <a> with a one symbol hint +| +|Extras +| --extra1 line above used to cause a segfault but no longer does +| +END_EXPECT + test_expect_code 129 git rev-parse --parseopt -- --does-not-exist 1>/dev/null 2>output < optionspec && + test_i18ncmp expect output +' + test_expect_success 'setup expect.1' " cat > expect <<EOF -set -- --foo --bar 'ham' -b -- 'arg' +set -- --foo --bar 'ham' -b --aswitch -- 'arg' EOF " test_expect_success 'test --parseopt' ' - git rev-parse --parseopt -- --foo --bar=ham --baz arg < optionspec > output && + git rev-parse --parseopt -- --foo --bar=ham --baz --aswitch arg < optionspec > output && test_cmp expect output ' test_expect_success 'test --parseopt with mixed options and arguments' ' - git rev-parse --parseopt -- --foo arg --bar=ham --baz < optionspec > output && + git rev-parse --parseopt -- --foo arg --bar=ham --baz --aswitch < optionspec > output && test_cmp expect output ' diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 79a0251efa..4ee009da66 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -157,7 +157,7 @@ test_expect_success 'relative path not found' ' test_expect_success 'relative path outside worktree' ' test_must_fail git rev-parse HEAD:../file.txt >output 2>error && test -z "$(cat output)" && - grep "outside repository" error + test_i18ngrep "outside repository" error ' test_expect_success 'relative path when cwd is outside worktree' ' diff --git a/t/t1507-rev-parse-upstream.sh b/t/t1507-rev-parse-upstream.sh index b23c4e3fab..93c77eac45 100755 --- a/t/t1507-rev-parse-upstream.sh +++ b/t/t1507-rev-parse-upstream.sh @@ -42,7 +42,7 @@ commit_subject () { error_message () { (cd clone && - test_must_fail git rev-parse --verify "$@") + test_must_fail git rev-parse --verify "$@" 2>../error) } test_expect_success '@{upstream} resolves to correct full name' ' @@ -159,8 +159,8 @@ test_expect_success 'branch@{u} error message when no upstream' ' cat >expect <<-EOF && fatal: no upstream configured for branch ${sq}non-tracking${sq} EOF - error_message non-tracking@{u} 2>actual && - test_i18ncmp expect actual + error_message non-tracking@{u} && + test_i18ncmp expect error ' test_expect_success '@{u} error message when no upstream' ' @@ -175,8 +175,8 @@ test_expect_success 'branch@{u} error message with misspelt branch' ' cat >expect <<-EOF && fatal: no such branch: ${sq}no-such-branch${sq} EOF - error_message no-such-branch@{u} 2>actual && - test_i18ncmp expect actual + error_message no-such-branch@{u} && + test_i18ncmp expect error ' test_expect_success '@{u} error message when not on a branch' ' @@ -192,8 +192,8 @@ test_expect_success 'branch@{u} error message if upstream branch not fetched' ' cat >expect <<-EOF && fatal: upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch EOF - error_message bad-upstream@{u} 2>actual && - test_i18ncmp expect actual + error_message bad-upstream@{u} && + test_i18ncmp expect error ' test_expect_success 'pull works when tracking a local branch' ' @@ -209,8 +209,9 @@ test_expect_success '@{u} works when tracking a local branch' ' test refs/heads/master = "$(full_name @{u})" ' +commit=$(git rev-parse HEAD) cat >expect <<EOF -commit 8f489d01d0cc65c3b0f09504ec50b5ed02a70bd5 +commit $commit Reflog: master@{0} (C O Mitter <committer@example.com>) Reflog message: branch: Created from HEAD Author: A U Thor <author@example.com> @@ -224,7 +225,7 @@ test_expect_success 'log -g other@{u}' ' ' cat >expect <<EOF -commit 8f489d01d0cc65c3b0f09504ec50b5ed02a70bd5 +commit $commit Reflog: master@{Thu Apr 7 15:17:13 2005 -0700} (C O Mitter <committer@example.com>) Reflog message: branch: Created from HEAD Author: A U Thor <author@example.com> diff --git a/t/t1510-repo-setup.sh b/t/t1510-repo-setup.sh index 13ae12dfa7..972bd9c785 100755 --- a/t/t1510-repo-setup.sh +++ b/t/t1510-repo-setup.sh @@ -39,6 +39,10 @@ A few rules for repo setup: 11. When user's cwd is outside worktree, cwd remains unchanged, prefix is NULL. " + +# This test heavily relies on the standard error of nested function calls. +test_untraceable=UnfortunatelyYes + . ./test-lib.sh here=$(pwd) @@ -234,7 +238,6 @@ test_expect_success '#0: nonbare repo, no explicit configuration' ' ' test_expect_success '#1: GIT_WORK_TREE without explicit GIT_DIR is accepted' ' - mkdir -p wt && try_repo 1 "$here" unset unset "" unset \ "$here/1/.git" "$here" "$here" 1/ \ "$here/1/.git" "$here" "$here" 1/sub/ 2>message && diff --git a/t/t1600-index.sh b/t/t1600-index.sh index 079d241145..c4422312f4 100755 --- a/t/t1600-index.sh +++ b/t/t1600-index.sh @@ -68,7 +68,7 @@ test_expect_success 'GIT_INDEX_VERSION takes precedence over config' ' git config --add index.version 2 && git add a 2>&1 && echo 4 >expect && - test-index-version <.git/index >actual && + test-tool index-version <.git/index >actual && test_cmp expect actual ) ' diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index 22f69a410b..e4f4c4df4e 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -6,12 +6,13 @@ test_description='split index mode tests' # We need total control of index splitting here sane_unset GIT_TEST_SPLIT_INDEX +sane_unset GIT_FSMONITOR_TEST test_expect_success 'enable split index' ' git config splitIndex.maxPercentChange 100 && git update-index --split-index && - test-dump-split-index .git/index >actual && - indexversion=$(test-index-version <.git/index) && + test-tool dump-split-index .git/index >actual && + indexversion=$(test-tool index-version <.git/index) && if test "$indexversion" = "4" then own=432ef4b63f32193984f339431fd50ca796493569 @@ -38,7 +39,7 @@ test_expect_success 'add one file' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && base $base 100644 $EMPTY_BLOB 0 one @@ -56,8 +57,8 @@ test_expect_success 'disable split index' ' EOF test_cmp ls-files.expect ls-files.actual && - BASE=$(test-dump-split-index .git/index | grep "^own" | sed "s/own/base/") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^own" | sed "s/own/base/") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && not a split index EOF @@ -72,7 +73,7 @@ test_expect_success 'enable split index again, "one" now belongs to base index"' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -90,7 +91,7 @@ test_expect_success 'modify original file, base index untouched' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q @@ -110,7 +111,7 @@ test_expect_success 'add another file, which stays index' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q @@ -129,7 +130,7 @@ test_expect_success 'remove file not in base index' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q @@ -146,7 +147,7 @@ test_expect_success 'remove file in base index' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -164,7 +165,7 @@ test_expect_success 'add original file back' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE 100644 $EMPTY_BLOB 0 one @@ -194,7 +195,7 @@ test_expect_success 'unify index, two files remain' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && not a split index EOF @@ -228,8 +229,8 @@ test_expect_success 'set core.splitIndex config variable to true' ' 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two EOF test_cmp ls-files.expect ls-files.actual && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -247,7 +248,7 @@ test_expect_success 'set core.splitIndex config variable to false' ' 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && not a split index EOF @@ -258,8 +259,8 @@ test_expect_success 'set core.splitIndex config variable to true' ' git config core.splitIndex true && : >three && git update-index --add three && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -268,7 +269,7 @@ test_expect_success 'set core.splitIndex config variable to true' ' test_cmp expect actual && : >four && git update-index --add four && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 four @@ -282,8 +283,8 @@ test_expect_success 'check behavior with splitIndex.maxPercentChange unset' ' git config --unset splitIndex.maxPercentChange && : >five && git update-index --add five && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -292,7 +293,7 @@ test_expect_success 'check behavior with splitIndex.maxPercentChange unset' ' test_cmp expect actual && : >six && git update-index --add six && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 six @@ -306,8 +307,8 @@ test_expect_success 'check splitIndex.maxPercentChange set to 0' ' git config splitIndex.maxPercentChange 0 && : >seven && git update-index --add seven && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -316,8 +317,8 @@ test_expect_success 'check splitIndex.maxPercentChange set to 0' ' test_cmp expect actual && : >eight && git update-index --add eight && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -331,12 +332,12 @@ test_expect_success 'shared index files expire after 2 weeks by default' ' git update-index --add ten && test $(ls .git/sharedindex.* | wc -l) -gt 2 && just_under_2_weeks_ago=$((5-14*86400)) && - test-chmtime =$just_under_2_weeks_ago .git/sharedindex.* && + test-tool chmtime =$just_under_2_weeks_ago .git/sharedindex.* && : >eleven && git update-index --add eleven && test $(ls .git/sharedindex.* | wc -l) -gt 2 && just_over_2_weeks_ago=$((-1-14*86400)) && - test-chmtime =$just_over_2_weeks_ago .git/sharedindex.* && + test-tool chmtime =$just_over_2_weeks_ago .git/sharedindex.* && : >twelve && git update-index --add twelve && test $(ls .git/sharedindex.* | wc -l) -le 2 @@ -344,12 +345,12 @@ test_expect_success 'shared index files expire after 2 weeks by default' ' test_expect_success 'check splitIndex.sharedIndexExpire set to 16 days' ' git config splitIndex.sharedIndexExpire "16.days.ago" && - test-chmtime =$just_over_2_weeks_ago .git/sharedindex.* && + test-tool chmtime =$just_over_2_weeks_ago .git/sharedindex.* && : >thirteen && git update-index --add thirteen && test $(ls .git/sharedindex.* | wc -l) -gt 2 && just_over_16_days_ago=$((-1-16*86400)) && - test-chmtime =$just_over_16_days_ago .git/sharedindex.* && + test-tool chmtime =$just_over_16_days_ago .git/sharedindex.* && : >fourteen && git update-index --add fourteen && test $(ls .git/sharedindex.* | wc -l) -le 2 @@ -358,13 +359,13 @@ test_expect_success 'check splitIndex.sharedIndexExpire set to 16 days' ' test_expect_success 'check splitIndex.sharedIndexExpire set to "never" and "now"' ' git config splitIndex.sharedIndexExpire never && just_10_years_ago=$((-365*10*86400)) && - test-chmtime =$just_10_years_ago .git/sharedindex.* && + test-tool chmtime =$just_10_years_ago .git/sharedindex.* && : >fifteen && git update-index --add fifteen && test $(ls .git/sharedindex.* | wc -l) -gt 2 && git config splitIndex.sharedIndexExpire now && just_1_second_ago=-1 && - test-chmtime =$just_1_second_ago .git/sharedindex.* && + test-tool chmtime =$just_1_second_ago .git/sharedindex.* && : >sixteen && git update-index --add sixteen && test $(ls .git/sharedindex.* | wc -l) -le 2 @@ -400,4 +401,42 @@ done <<\EOF 0642 -rw-r---w- EOF +test_expect_success POSIXPERM,SANITY 'graceful handling when splitting index is not allowed' ' + test_create_repo ro && + ( + cd ro && + test_commit initial && + git update-index --split-index && + test -f .git/sharedindex.* + ) && + cp ro/.git/index new-index && + test_when_finished "chmod u+w ro/.git" && + chmod u-w ro/.git && + GIT_INDEX_FILE="$(pwd)/new-index" git -C ro update-index --split-index && + chmod u+w ro/.git && + rm ro/.git/sharedindex.* && + GIT_INDEX_FILE=new-index git ls-files >actual && + echo initial.t >expected && + test_cmp expected actual +' + +test_expect_success 'writing split index with null sha1 does not write cache tree' ' + git config core.splitIndex true && + git config splitIndex.maxPercentChange 0 && + git commit -m "commit" && + { + git ls-tree HEAD && + printf "160000 commit $_z40\\tbroken\\n" + } >broken-tree && + echo "add broken entry" >msg && + + tree=$(git mktree <broken-tree) && + test_tick && + commit=$(git commit-tree $tree -p HEAD <msg) && + git update-ref HEAD "$commit" && + GIT_ALLOW_NULL_SHA1=1 git reset --hard && + (test-tool dump-cache-tree >cache-tree.out || true) && + test_line_count = 0 cache-tree.out +' + test_done diff --git a/t/t2020-checkout-detach.sh b/t/t2020-checkout-detach.sh index fbb4ee9bb4..1fa670625c 100755 --- a/t/t2020-checkout-detach.sh +++ b/t/t2020-checkout-detach.sh @@ -186,4 +186,135 @@ test_expect_success 'no advice given for explicit detached head state' ' test_cmp expect.no-advice actual ' +# Detached HEAD tests for GIT_PRINT_SHA1_ELLIPSIS (new format) +test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not asked to' " + + commit=$(git rev-parse --short=12 master^) && + commit2=$(git rev-parse --short=12 master~2) && + commit3=$(git rev-parse --short=12 master~3) && + + # The first detach operation is more chatty than the following ones. + cat >1st_detach <<-EOF && + Note: checking out 'HEAD^'. + + You are in 'detached HEAD' state. You can look around, make experimental + changes and commit them, and you can discard any commits you make in this + state without impacting any branches by performing another checkout. + + If you want to create a new branch to retain commits you create, you may + do so (now or later) by using -b with the checkout command again. Example: + + git checkout -b <new-branch-name> + + HEAD is now at \$commit three + EOF + + # The remaining ones just show info about previous and current HEADs. + cat >2nd_detach <<-EOF && + Previous HEAD position was \$commit three + HEAD is now at \$commit2 two + EOF + + cat >3rd_detach <<-EOF && + Previous HEAD position was \$commit2 two + HEAD is now at \$commit3 one + EOF + + reset && + check_not_detached && + + # Various ways of *not* asking for ellipses + + sane_unset GIT_PRINT_SHA1_ELLIPSIS && + git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 1st_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS="no" git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 2nd_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS= git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 3rd_detach actual && + + sane_unset GIT_PRINT_SHA1_ELLIPSIS && + + # We only have four commits, but we can re-use them + reset && + check_not_detached && + + # Make no mention of the env var at all + git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 1st_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS='nope' && + git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 2nd_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS=nein && + git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 3rd_detach actual && + + true +" + +# Detached HEAD tests for GIT_PRINT_SHA1_ELLIPSIS (old format) +test_expect_success 'describe_detached_head does print SHA-1 ellipsis when asked to' " + + commit=$(git rev-parse --short=12 master^) && + commit2=$(git rev-parse --short=12 master~2) && + commit3=$(git rev-parse --short=12 master~3) && + + # The first detach operation is more chatty than the following ones. + cat >1st_detach <<-EOF && + Note: checking out 'HEAD^'. + + You are in 'detached HEAD' state. You can look around, make experimental + changes and commit them, and you can discard any commits you make in this + state without impacting any branches by performing another checkout. + + If you want to create a new branch to retain commits you create, you may + do so (now or later) by using -b with the checkout command again. Example: + + git checkout -b <new-branch-name> + + HEAD is now at \$commit... three + EOF + + # The remaining ones just show info about previous and current HEADs. + cat >2nd_detach <<-EOF && + Previous HEAD position was \$commit... three + HEAD is now at \$commit2... two + EOF + + cat >3rd_detach <<-EOF && + Previous HEAD position was \$commit2... two + HEAD is now at \$commit3... one + EOF + + reset && + check_not_detached && + + # Various ways of asking for ellipses... + # The user can just use any kind of quoting (including none). + + GIT_PRINT_SHA1_ELLIPSIS=yes git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 1st_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS=Yes git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 2nd_detach actual && + + GIT_PRINT_SHA1_ELLIPSIS=YES git -c 'core.abbrev=12' checkout HEAD^ >actual 2>&1 && + check_detached && + test_i18ncmp 3rd_detach actual && + + true +" + test_done diff --git a/t/t2022-checkout-paths.sh b/t/t2022-checkout-paths.sh index f46d0499bc..fc3eb43b89 100755 --- a/t/t2022-checkout-paths.sh +++ b/t/t2022-checkout-paths.sh @@ -68,13 +68,13 @@ test_expect_success 'do not touch files that are already up-to-date' ' git add file1 file2 && git commit -m base && echo modified >file1 && - test-chmtime =1000000000 file2 && + test-tool chmtime =1000000000 file2 && git update-index -q --refresh && git checkout HEAD -- file1 file2 && echo one >expect && test_cmp expect file1 && - echo "1000000000 file2" >expect && - test-chmtime -v +0 file2 >actual && + echo "1000000000" >expect && + test-tool chmtime --get file2 >actual && test_cmp expect actual ' diff --git a/t/t2025-worktree-add.sh b/t/t2025-worktree-add.sh index b5c47ac602..2240498924 100755 --- a/t/t2025-worktree-add.sh +++ b/t/t2025-worktree-add.sh @@ -198,13 +198,25 @@ test_expect_success '"add" with <branch> omitted' ' test_cmp_rev HEAD bat ' -test_expect_success '"add" auto-vivify does not clobber existing branch' ' - test_commit c1 && - test_commit c2 && - git branch precious HEAD~1 && - test_must_fail git worktree add precious && - test_cmp_rev HEAD~1 precious && - test_path_is_missing precious +test_expect_success '"add" checks out existing branch of dwimd name' ' + git branch dwim HEAD~1 && + git worktree add dwim && + test_cmp_rev HEAD~1 dwim && + ( + cd dwim && + test_cmp_rev HEAD dwim + ) +' + +test_expect_success '"add <path>" dwim fails with checked out branch' ' + git checkout -b test-branch && + test_must_fail git worktree add test-branch && + test_path_is_missing test-branch +' + +test_expect_success '"add --force" with existing dwimd name doesnt die' ' + git checkout test-branch && + git worktree add --force test-branch ' test_expect_success '"add" no auto-vivify with --detach and <branch> omitted' ' @@ -245,6 +257,12 @@ test_expect_success 'local clone from linked checkout' ' ( cd here-clone && git fsck ) ' +test_expect_success 'local clone --shared from linked checkout' ' + git -C bare worktree add --detach ../baretree && + git clone --local --shared baretree bare-clone && + grep /bare/ bare-clone/.git/objects/info/alternates +' + test_expect_success '"add" worktree with --no-checkout' ' git worktree add --no-checkout -b swamp swamp && ! test -e swamp/init.t && @@ -313,5 +331,200 @@ test_expect_success 'checkout a branch under bisect' ' test_expect_success 'rename a branch under bisect not allowed' ' test_must_fail git branch -M under-bisect bisect-with-new-name ' +# Is branch "refs/heads/$1" set to pull from "$2/$3"? +test_branch_upstream () { + printf "%s\n" "$2" "refs/heads/$3" >expect.upstream && + { + git config "branch.$1.remote" && + git config "branch.$1.merge" + } >actual.upstream && + test_cmp expect.upstream actual.upstream +} + +test_expect_success '--track sets up tracking' ' + test_when_finished rm -rf track && + git worktree add --track -b track track master && + test_branch_upstream track . master +' + +# setup remote repository $1 and repository $2 with $1 set up as +# remote. The remote has two branches, master and foo. +setup_remote_repo () { + git init $1 && + ( + cd $1 && + test_commit $1_master && + git checkout -b foo && + test_commit upstream_foo + ) && + git init $2 && + ( + cd $2 && + test_commit $2_master && + git remote add $1 ../$1 && + git config remote.$1.fetch \ + "refs/heads/*:refs/remotes/$1/*" && + git fetch --all + ) +} + +test_expect_success '--no-track avoids setting up tracking' ' + test_when_finished rm -rf repo_upstream repo_local foo && + setup_remote_repo repo_upstream repo_local && + ( + cd repo_local && + git worktree add --no-track -b foo ../foo repo_upstream/foo + ) && + ( + cd foo && + test_must_fail git config "branch.foo.remote" && + test_must_fail git config "branch.foo.merge" && + test_cmp_rev refs/remotes/repo_upstream/foo refs/heads/foo + ) +' + +test_expect_success '"add" <path> <non-existent-branch> fails' ' + test_must_fail git worktree add foo non-existent +' + +test_expect_success '"add" <path> <branch> dwims' ' + test_when_finished rm -rf repo_upstream repo_dwim foo && + setup_remote_repo repo_upstream repo_dwim && + git init repo_dwim && + ( + cd repo_dwim && + git worktree add ../foo foo + ) && + ( + cd foo && + test_branch_upstream foo repo_upstream foo && + test_cmp_rev refs/remotes/repo_upstream/foo refs/heads/foo + ) +' + +test_expect_success 'git worktree add does not match remote' ' + test_when_finished rm -rf repo_a repo_b foo && + setup_remote_repo repo_a repo_b && + ( + cd repo_b && + git worktree add ../foo + ) && + ( + cd foo && + test_must_fail git config "branch.foo.remote" && + test_must_fail git config "branch.foo.merge" && + ! test_cmp_rev refs/remotes/repo_a/foo refs/heads/foo + ) +' + +test_expect_success 'git worktree add --guess-remote sets up tracking' ' + test_when_finished rm -rf repo_a repo_b foo && + setup_remote_repo repo_a repo_b && + ( + cd repo_b && + git worktree add --guess-remote ../foo + ) && + ( + cd foo && + test_branch_upstream foo repo_a foo && + test_cmp_rev refs/remotes/repo_a/foo refs/heads/foo + ) +' + +test_expect_success 'git worktree add with worktree.guessRemote sets up tracking' ' + test_when_finished rm -rf repo_a repo_b foo && + setup_remote_repo repo_a repo_b && + ( + cd repo_b && + git config worktree.guessRemote true && + git worktree add ../foo + ) && + ( + cd foo && + test_branch_upstream foo repo_a foo && + test_cmp_rev refs/remotes/repo_a/foo refs/heads/foo + ) +' + +test_expect_success 'git worktree --no-guess-remote option overrides config' ' + test_when_finished rm -rf repo_a repo_b foo && + setup_remote_repo repo_a repo_b && + ( + cd repo_b && + git config worktree.guessRemote true && + git worktree add --no-guess-remote ../foo + ) && + ( + cd foo && + test_must_fail git config "branch.foo.remote" && + test_must_fail git config "branch.foo.merge" && + ! test_cmp_rev refs/remotes/repo_a/foo refs/heads/foo + ) +' + +post_checkout_hook () { + gitdir=${1:-.git} + test_when_finished "rm -f $gitdir/hooks/post-checkout" && + mkdir -p $gitdir/hooks && + write_script $gitdir/hooks/post-checkout <<-\EOF + { + echo $* + git rev-parse --git-dir --show-toplevel + } >hook.actual + EOF +} + +test_expect_success '"add" invokes post-checkout hook (branch)' ' + post_checkout_hook && + { + echo $_z40 $(git rev-parse HEAD) 1 && + echo $(pwd)/.git/worktrees/gumby && + echo $(pwd)/gumby + } >hook.expect && + git worktree add gumby && + test_cmp hook.expect gumby/hook.actual +' + +test_expect_success '"add" invokes post-checkout hook (detached)' ' + post_checkout_hook && + { + echo $_z40 $(git rev-parse HEAD) 1 && + echo $(pwd)/.git/worktrees/grumpy && + echo $(pwd)/grumpy + } >hook.expect && + git worktree add --detach grumpy && + test_cmp hook.expect grumpy/hook.actual +' + +test_expect_success '"add --no-checkout" suppresses post-checkout hook' ' + post_checkout_hook && + rm -f hook.actual && + git worktree add --no-checkout gloopy && + test_path_is_missing gloopy/hook.actual +' + +test_expect_success '"add" in other worktree invokes post-checkout hook' ' + post_checkout_hook && + { + echo $_z40 $(git rev-parse HEAD) 1 && + echo $(pwd)/.git/worktrees/guppy && + echo $(pwd)/guppy + } >hook.expect && + git -C gloopy worktree add --detach ../guppy && + test_cmp hook.expect guppy/hook.actual +' + +test_expect_success '"add" in bare repo invokes post-checkout hook' ' + rm -rf bare && + git clone --bare . bare && + { + echo $_z40 $(git --git-dir=bare rev-parse HEAD) 1 && + echo $(pwd)/bare/worktrees/goozy && + echo $(pwd)/goozy + } >hook.expect && + post_checkout_hook bare && + git -C bare worktree add --detach ../goozy && + test_cmp hook.expect goozy/hook.actual +' test_done diff --git a/t/t2026-worktree-prune.sh b/t/t2026-worktree-prune.sh index a0f1e3bb80..b7d6d5d45a 100755 --- a/t/t2026-worktree-prune.sh +++ b/t/t2026-worktree-prune.sh @@ -78,10 +78,9 @@ test_expect_success 'not prune locked checkout' ' test_expect_success 'not prune recent checkouts' ' test_when_finished rm -r .git/worktrees && - mkdir zz && - mkdir -p .git/worktrees/jlm && - echo "$(pwd)"/zz >.git/worktrees/jlm/gitdir && - rmdir zz && + git worktree add jlm HEAD && + test -d .git/worktrees/jlm && + rm -rf jlm && git worktree prune --verbose --expire=2.days.ago && test -d .git/worktrees/jlm ' diff --git a/t/t2028-worktree-move.sh b/t/t2028-worktree-move.sh index 8298aaf97f..5f7d45b7b7 100755 --- a/t/t2028-worktree-move.sh +++ b/t/t2028-worktree-move.sh @@ -7,7 +7,8 @@ test_description='test git worktree move, remove, lock and unlock' test_expect_success 'setup' ' test_commit init && git worktree add source && - git worktree list --porcelain | grep "^worktree" >actual && + git worktree list --porcelain >out && + grep "^worktree" out >actual && cat <<-EOF >expected && worktree $(pwd) worktree $(pwd)/source @@ -59,4 +60,85 @@ test_expect_success 'unlock worktree twice' ' test_path_is_missing .git/worktrees/source/locked ' +test_expect_success 'move non-worktree' ' + mkdir abc && + test_must_fail git worktree move abc def +' + +test_expect_success 'move locked worktree' ' + git worktree lock source && + test_when_finished "git worktree unlock source" && + test_must_fail git worktree move source destination +' + +test_expect_success 'move worktree' ' + git worktree move source destination && + test_path_is_missing source && + git worktree list --porcelain >out && + grep "^worktree.*/destination$" out && + ! grep "^worktree.*/source$" out && + git -C destination log --format=%s >actual2 && + echo init >expected2 && + test_cmp expected2 actual2 +' + +test_expect_success 'move main worktree' ' + test_must_fail git worktree move . def +' + +test_expect_success 'move worktree to another dir' ' + mkdir some-dir && + git worktree move destination some-dir && + test_when_finished "git worktree move some-dir/destination destination" && + test_path_is_missing destination && + git worktree list --porcelain >out && + grep "^worktree.*/some-dir/destination$" out && + git -C some-dir/destination log --format=%s >actual2 && + echo init >expected2 && + test_cmp expected2 actual2 +' + +test_expect_success 'remove main worktree' ' + test_must_fail git worktree remove . +' + +test_expect_success 'remove locked worktree' ' + git worktree lock destination && + test_when_finished "git worktree unlock destination" && + test_must_fail git worktree remove destination +' + +test_expect_success 'remove worktree with dirty tracked file' ' + echo dirty >>destination/init.t && + test_when_finished "git -C destination checkout init.t" && + test_must_fail git worktree remove destination +' + +test_expect_success 'remove worktree with untracked file' ' + : >destination/untracked && + test_must_fail git worktree remove destination +' + +test_expect_success 'force remove worktree with untracked file' ' + git worktree remove --force destination && + test_path_is_missing destination +' + +test_expect_success 'remove missing worktree' ' + git worktree add to-be-gone && + test -d .git/worktrees/to-be-gone && + mv to-be-gone gone && + git worktree remove to-be-gone && + test_path_is_missing .git/worktrees/to-be-gone +' + +test_expect_success 'NOT remove missing-but-locked worktree' ' + git worktree add gone-but-locked && + git worktree lock gone-but-locked && + test -d .git/worktrees/gone-but-locked && + mv gone-but-locked really-gone-now && + test_must_fail git worktree remove gone-but-locked && + test_path_is_dir .git/worktrees/gone-but-locked +' + test_done diff --git a/t/t2101-update-index-reupdate.sh b/t/t2101-update-index-reupdate.sh index c8bce8c2e4..685ec45639 100755 --- a/t/t2101-update-index-reupdate.sh +++ b/t/t2101-update-index-reupdate.sh @@ -8,19 +8,20 @@ test_description='git update-index --again test. . ./test-lib.sh -cat > expected <<\EOF -100644 3b18e512dba79e4c8300dd08aeb37f8e728b8dad 0 file1 -100644 9db8893856a8a02eaa73470054b7c1c5a7c82e47 0 file2 -EOF -test_expect_success 'update-index --add' \ - 'echo hello world >file1 && - echo goodbye people >file2 && - git update-index --add file1 file2 && - git ls-files -s >current && - cmp current expected' +test_expect_success 'update-index --add' ' + echo hello world >file1 && + echo goodbye people >file2 && + git update-index --add file1 file2 && + git ls-files -s >current && + cat >expected <<-EOF && + 100644 $(git hash-object file1) 0 file1 + 100644 $(git hash-object file2) 0 file2 + EOF + cmp current expected +' -test_expect_success 'update-index --again' \ - 'rm -f file1 && +test_expect_success 'update-index --again' ' + rm -f file1 && echo hello everybody >file2 && if git update-index --again then @@ -29,25 +30,23 @@ test_expect_success 'update-index --again' \ else echo happy - failed as expected fi && - git ls-files -s >current && - cmp current expected' + git ls-files -s >current && + cmp current expected +' -cat > expected <<\EOF -100644 0f1ae1422c2bf43f117d3dbd715c988a9ed2103f 0 file2 -EOF -test_expect_success 'update-index --remove --again' \ - 'git update-index --remove --again && - git ls-files -s >current && - cmp current expected' +test_expect_success 'update-index --remove --again' ' + git update-index --remove --again && + git ls-files -s >current && + cat >expected <<-EOF && + 100644 $(git hash-object file2) 0 file2 + EOF + cmp current expected +' test_expect_success 'first commit' 'git commit -m initial' -cat > expected <<\EOF -100644 53ab446c3f4e42ce9bb728a0ccb283a101be4979 0 dir1/file3 -100644 0f1ae1422c2bf43f117d3dbd715c988a9ed2103f 0 file2 -EOF -test_expect_success 'update-index again' \ - 'mkdir -p dir1 && +test_expect_success 'update-index again' ' + mkdir -p dir1 && echo hello world >dir1/file3 && echo goodbye people >file2 && git update-index --add file2 dir1/file3 && @@ -55,30 +54,38 @@ test_expect_success 'update-index again' \ echo happy >dir1/file3 && git update-index --again && git ls-files -s >current && - cmp current expected' + cat >expected <<-EOF && + 100644 $(git hash-object dir1/file3) 0 dir1/file3 + 100644 $(git hash-object file2) 0 file2 + EOF + cmp current expected +' -cat > expected <<\EOF -100644 d7fb3f695f06c759dbf3ab00046e7cc2da22d10f 0 dir1/file3 -100644 0f1ae1422c2bf43f117d3dbd715c988a9ed2103f 0 file2 -EOF -test_expect_success 'update-index --update from subdir' \ - 'echo not so happy >file2 && +file2=$(git hash-object file2) +test_expect_success 'update-index --update from subdir' ' + echo not so happy >file2 && (cd dir1 && cat ../file2 >file3 && git update-index --again ) && git ls-files -s >current && - cmp current expected' + cat >expected <<-EOF && + 100644 $(git hash-object dir1/file3) 0 dir1/file3 + 100644 $file2 0 file2 + EOF + test_cmp current expected +' -cat > expected <<\EOF -100644 594fb5bb1759d90998e2bf2a38261ae8e243c760 0 dir1/file3 -100644 0f1ae1422c2bf43f117d3dbd715c988a9ed2103f 0 file2 -EOF -test_expect_success 'update-index --update with pathspec' \ - 'echo very happy >file2 && +test_expect_success 'update-index --update with pathspec' ' + echo very happy >file2 && cat file2 >dir1/file3 && git update-index --again dir1/ && git ls-files -s >current && - cmp current expected' + cat >expected <<-EOF && + 100644 $(git hash-object dir1/file3) 0 dir1/file3 + 100644 $file2 0 file2 + EOF + cmp current expected +' test_done diff --git a/t/t2104-update-index-skip-worktree.sh b/t/t2104-update-index-skip-worktree.sh index cc830da58d..7e2e7dd4ae 100755 --- a/t/t2104-update-index-skip-worktree.sh +++ b/t/t2104-update-index-skip-worktree.sh @@ -33,7 +33,7 @@ test_expect_success 'setup' ' ' test_expect_success 'index is at version 2' ' - test "$(test-index-version < .git/index)" = 2 + test "$(test-tool index-version < .git/index)" = 2 ' test_expect_success 'update-index --skip-worktree' ' @@ -42,7 +42,7 @@ test_expect_success 'update-index --skip-worktree' ' ' test_expect_success 'index is at version 3 after having some skip-worktree entries' ' - test "$(test-index-version < .git/index)" = 3 + test "$(test-tool index-version < .git/index)" = 3 ' test_expect_success 'ls-files -t' ' @@ -55,7 +55,7 @@ test_expect_success 'update-index --no-skip-worktree' ' ' test_expect_success 'index version is back to 2 when there is no skip-worktree entry' ' - test "$(test-index-version < .git/index)" = 2 + test "$(test-tool index-version < .git/index)" = 2 ' test_done diff --git a/t/t2107-update-index-basic.sh b/t/t2107-update-index-basic.sh index 32ac6e09bd..1db7e6a1ab 100755 --- a/t/t2107-update-index-basic.sh +++ b/t/t2107-update-index-basic.sh @@ -85,9 +85,9 @@ test_expect_success '--chmod=+x and chmod=-x in the same argument list' ' >B && git add A B && git update-index --chmod=+x A --chmod=-x B && - cat >expect <<-\EOF && - 100755 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 A - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 B + cat >expect <<-EOF && + 100755 $EMPTY_BLOB 0 A + 100644 $EMPTY_BLOB 0 B EOF git ls-files --stage A B >actual && test_cmp expect actual diff --git a/t/t2203-add-intent.sh b/t/t2203-add-intent.sh index 1bdf38e80d..78236dc7d8 100755 --- a/t/t2203-add-intent.sh +++ b/t/t2203-add-intent.sh @@ -25,6 +25,18 @@ test_expect_success 'git status' ' test_cmp expect actual ' +test_expect_success 'git status with porcelain v2' ' + git status --porcelain=v2 | grep -v "^?" >actual && + nam1=d00491fd7e5bb6fa28c517a0bb32b8b506539d4d && + nam2=ce013625030ba8dba906f756967f9e9ca394464a && + cat >expect <<-EOF && + 1 DA N... 100644 000000 100644 $nam1 $_z40 1.t + 1 A. N... 000000 100644 100644 $_z40 $nam2 elif + 1 .A N... 000000 000000 100644 $_z40 $_z40 file + EOF + test_cmp expect actual +' + test_expect_success 'check result of "add -N"' ' git ls-files -s file >actual && empty=$(git hash-object --stdin </dev/null) && @@ -150,5 +162,65 @@ test_expect_success 'commit: ita entries ignored in empty commit check' ' ) ' +test_expect_success 'rename detection finds the right names' ' + git init rename-detection && + ( + cd rename-detection && + echo contents >first && + git add first && + git commit -m first && + mv first third && + git add -N third && + + git status | grep -v "^?" >actual.1 && + test_i18ngrep "renamed: *first -> third" actual.1 && + + git status --porcelain | grep -v "^?" >actual.2 && + cat >expected.2 <<-\EOF && + R first -> third + EOF + test_cmp expected.2 actual.2 && + + hash=12f00e90b6ef79117ce6e650416b8cf517099b78 && + git status --porcelain=v2 | grep -v "^?" >actual.3 && + cat >expected.3 <<-EOF && + 2 .R N... 100644 100644 100644 $hash $hash R100 third first + EOF + test_cmp expected.3 actual.3 + ) +' + +test_expect_success 'double rename detection in status' ' + git init rename-detection-2 && + ( + cd rename-detection-2 && + echo contents >first && + git add first && + git commit -m first && + git mv first second && + mv second third && + git add -N third && + + git status | grep -v "^?" >actual.1 && + test_i18ngrep "renamed: *first -> second" actual.1 && + test_i18ngrep "renamed: *second -> third" actual.1 && + + git status --porcelain | grep -v "^?" >actual.2 && + cat >expected.2 <<-\EOF && + R first -> second + R second -> third + EOF + test_cmp expected.2 actual.2 && + + hash=12f00e90b6ef79117ce6e650416b8cf517099b78 && + git status --porcelain=v2 | grep -v "^?" >actual.3 && + cat >expected.3 <<-EOF && + 2 R. N... 100644 100644 100644 $hash $hash R100 second first + 2 .R N... 100644 100644 100644 $hash $hash R100 third second + EOF + test_cmp expected.3 actual.3 + ) +' + test_done diff --git a/t/t3008-ls-files-lazy-init-name-hash.sh b/t/t3008-ls-files-lazy-init-name-hash.sh index bdf5198b7e..08af596ba6 100755 --- a/t/t3008-ls-files-lazy-init-name-hash.sh +++ b/t/t3008-ls-files-lazy-init-name-hash.sh @@ -4,7 +4,7 @@ test_description='Test the lazy init name hash with various folder structures' . ./test-lib.sh -if test 1 -eq $($GIT_BUILD_DIR/t/helper/test-online-cpus) +if test 1 -eq $($GIT_BUILD_DIR/t/helper/test-tool online-cpus) then skip_all='skipping lazy-init tests, single cpu' test_done @@ -21,7 +21,7 @@ test_expect_success 'no buffer overflow in lazy_init_name_hash' ' ) | sed "s/^/100644 $EMPTY_BLOB /" | git update-index --index-info && - test-lazy-init-name-hash -m + test-tool lazy-init-name-hash -m ' test_done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index 9a893b5fe7..3563e77b37 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -525,20 +525,22 @@ test_expect_success 'merge-recursive w/ empty work tree - ours has rename' ' GIT_INDEX_FILE="$PWD/ours-has-rename-index" && export GIT_INDEX_FILE && mkdir "$GIT_WORK_TREE" && - git read-tree -i -m $c7 && - git update-index --ignore-missing --refresh && - git merge-recursive $c0 -- $c7 $c3 && - git ls-files -s >actual-files - ) 2>actual-err && - >expected-err && + git read-tree -i -m $c7 2>actual-err && + test_must_be_empty actual-err && + git update-index --ignore-missing --refresh 2>actual-err && + test_must_be_empty actual-err && + git merge-recursive $c0 -- $c7 $c3 2>actual-err && + test_must_be_empty actual-err && + git ls-files -s >actual-files 2>actual-err && + test_must_be_empty actual-err + ) && cat >expected-files <<-EOF && 100644 $o3 0 b/c 100644 $o0 0 c 100644 $o0 0 d/e 100644 $o0 0 e EOF - test_cmp expected-files actual-files && - test_cmp expected-err actual-err + test_cmp expected-files actual-files ' test_expect_success 'merge-recursive w/ empty work tree - theirs has rename' ' @@ -548,20 +550,22 @@ test_expect_success 'merge-recursive w/ empty work tree - theirs has rename' ' GIT_INDEX_FILE="$PWD/theirs-has-rename-index" && export GIT_INDEX_FILE && mkdir "$GIT_WORK_TREE" && - git read-tree -i -m $c3 && - git update-index --ignore-missing --refresh && - git merge-recursive $c0 -- $c3 $c7 && - git ls-files -s >actual-files - ) 2>actual-err && - >expected-err && + git read-tree -i -m $c3 2>actual-err && + test_must_be_empty actual-err && + git update-index --ignore-missing --refresh 2>actual-err && + test_must_be_empty actual-err && + git merge-recursive $c0 -- $c3 $c7 2>actual-err && + test_must_be_empty actual-err && + git ls-files -s >actual-files 2>actual-err && + test_must_be_empty actual-err + ) && cat >expected-files <<-EOF && 100644 $o3 0 b/c 100644 $o0 0 c 100644 $o0 0 d/e 100644 $o0 0 e EOF - test_cmp expected-files actual-files && - test_cmp expected-err actual-err + test_cmp expected-files actual-files ' test_expect_success 'merge removes empty directories' ' @@ -678,4 +682,54 @@ test_expect_success 'merge-recursive remembers the names of all base trees' ' test_cmp expect actual ' +test_expect_success 'merge-recursive internal merge resolves to the sameness' ' + git reset --hard HEAD && + + # We are going to create a history leading to two criss-cross + # branches A and B. The common ancestor at the bottom, O0, + # has two child commits O1 and O2, both of which will be merge + # base between A and B, like so: + # + # O1---A + # / \ / + # O0 . + # \ / \ + # O2---B + # + # The recently added "check to see if the index is different from + # the tree into which something else is getting merged" check must + # NOT kick in when an inner merge between O1 and O2 is made. Both + # O1 and O2 happen to have the same tree as O0 in this test to + # trigger the bug---whether the inner merge is made by merging O2 + # into O1 or O1 into O2, their common ancestor O0 and the branch + # being merged have the same tree. We should not trigger the "is + # the index dirty?" check in this case. + + echo "zero" >file && + git add file && + test_tick && + git commit -m "O0" && + O0=$(git rev-parse HEAD) && + + test_tick && + git commit --allow-empty -m "O1" && + O1=$(git rev-parse HEAD) && + + git reset --hard $O0 && + test_tick && + git commit --allow-empty -m "O2" && + O2=$(git rev-parse HEAD) && + + test_tick && + git merge -s ours $O1 && + B=$(git rev-parse HEAD) && + + git reset --hard $O1 && + test_tick && + git merge -s ours $O2 && + A=$(git rev-parse HEAD) && + + git merge $B +' + test_done diff --git a/t/t3040-subprojects-basic.sh b/t/t3040-subprojects-basic.sh index 0a4ff6d824..b81eb5fd6f 100755 --- a/t/t3040-subprojects-basic.sh +++ b/t/t3040-subprojects-basic.sh @@ -19,7 +19,7 @@ test_expect_success 'setup: create subprojects' ' git update-index --add sub1 && git add sub2 && git commit -q -m "subprojects added" && - git diff-tree --abbrev=5 HEAD^ HEAD |cut -d" " -f-3,5- >current && + GIT_PRINT_SHA1_ELLIPSIS="yes" git diff-tree --abbrev=5 HEAD^ HEAD |cut -d" " -f-3,5- >current && git branch save HEAD && cat >expected <<-\EOF && :000000 160000 00000... A sub1 diff --git a/t/t3070-wildmatch.sh b/t/t3070-wildmatch.sh index 163a14a1c2..dce102130f 100755 --- a/t/t3070-wildmatch.sh +++ b/t/t3070-wildmatch.sh @@ -4,266 +4,431 @@ test_description='wildmatch tests' . ./test-lib.sh -match() { - if [ $1 = 1 ]; then - test_expect_success "wildmatch: match '$3' '$4'" " - test-wildmatch wildmatch '$3' '$4' - " - else - test_expect_success "wildmatch: no match '$3' '$4'" " - ! test-wildmatch wildmatch '$3' '$4' - " - fi +should_create_test_file() { + file=$1 + + case $file in + # `touch .` will succeed but obviously not do what we intend + # here. + ".") + return 1 + ;; + # We cannot create a file with an empty filename. + "") + return 1 + ;; + # The tests that are testing that e.g. foo//bar is matched by + # foo/*/bar can't be tested on filesystems since there's no + # way we're getting a double slash. + *//*) + return 1 + ;; + # When testing the difference between foo/bar and foo/bar/ we + # can't test the latter. + */) + return 1 + ;; + # On Windows, \ in paths is silently converted to /, which + # would result in the "touch" below working, but the test + # itself failing. See 6fd1106aa4 ("t3700: Skip a test with + # backslashes in pathspec", 2009-03-13) for prior art and + # details. + *\\*) + if ! test_have_prereq BSLASHPSPEC + then + return 1 + fi + # NOTE: The ;;& bash extension is not portable, so + # this test needs to be at the end of the pattern + # list. + # + # If we want to add more conditional returns we either + # need a new case statement, or turn this whole thing + # into a series of "if" tests. + ;; + esac + + + # On Windows proper (i.e. not Cygwin) many file names which + # under Cygwin would be emulated don't work. + if test_have_prereq MINGW + then + case $file in + " ") + # Files called " " are forbidden on Windows + return 1 + ;; + *\<*|*\>*|*:*|*\"*|*\|*|*\?*|*\**) + # Files with various special characters aren't + # allowed on Windows. Sourced from + # https://stackoverflow.com/a/31976060 + return 1 + ;; + esac + fi + + return 0 } -imatch() { - if [ $1 = 1 ]; then - test_expect_success "iwildmatch: match '$2' '$3'" " - test-wildmatch iwildmatch '$2' '$3' - " - else - test_expect_success "iwildmatch: no match '$2' '$3'" " - ! test-wildmatch iwildmatch '$2' '$3' - " - fi +match_with_function() { + text=$1 + pattern=$2 + match_expect=$3 + match_function=$4 + + if test "$match_expect" = 1 + then + test_expect_success "$match_function: match '$text' '$pattern'" " + test-tool wildmatch $match_function '$text' '$pattern' + " + elif test "$match_expect" = 0 + then + test_expect_success "$match_function: no match '$text' '$pattern'" " + test_must_fail test-tool wildmatch $match_function '$text' '$pattern' + " + else + test_expect_success "PANIC: Test framework error. Unknown matches value $match_expect" 'false' + fi + +} + +match_with_ls_files() { + text=$1 + pattern=$2 + match_expect=$3 + match_function=$4 + ls_files_args=$5 + + match_stdout_stderr_cmp=" + tr -d '\0' <actual.raw >actual && + >expect.err && + test_cmp expect.err actual.err && + test_cmp expect actual" + + if test "$match_expect" = 'E' + then + if test -e .git/created_test_file + then + test_expect_success EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match dies on '$pattern' '$text'" " + printf '%s' '$text' >expect && + test_must_fail git$ls_files_args ls-files -z -- '$pattern' + " + else + test_expect_failure EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match skip '$pattern' '$text'" 'false' + fi + elif test "$match_expect" = 1 + then + if test -e .git/created_test_file + then + test_expect_success EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match '$pattern' '$text'" " + printf '%s' '$text' >expect && + git$ls_files_args ls-files -z -- '$pattern' >actual.raw 2>actual.err && + $match_stdout_stderr_cmp + " + else + test_expect_failure EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match skip '$pattern' '$text'" 'false' + fi + elif test "$match_expect" = 0 + then + if test -e .git/created_test_file + then + test_expect_success EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): no match '$pattern' '$text'" " + >expect && + git$ls_files_args ls-files -z -- '$pattern' >actual.raw 2>actual.err && + $match_stdout_stderr_cmp + " + else + test_expect_failure EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): no match skip '$pattern' '$text'" 'false' + fi + else + test_expect_success "PANIC: Test framework error. Unknown matches value $match_expect" 'false' + fi } -pathmatch() { - if [ $1 = 1 ]; then - test_expect_success "pathmatch: match '$2' '$3'" " - test-wildmatch pathmatch '$2' '$3' - " - else - test_expect_success "pathmatch: no match '$2' '$3'" " - ! test-wildmatch pathmatch '$2' '$3' - " - fi +match() { + if test "$#" = 6 + then + # When test-tool wildmatch and git ls-files produce the same + # result. + match_glob=$1 + match_file_glob=$match_glob + match_iglob=$2 + match_file_iglob=$match_iglob + match_pathmatch=$3 + match_file_pathmatch=$match_pathmatch + match_pathmatchi=$4 + match_file_pathmatchi=$match_pathmatchi + text=$5 + pattern=$6 + elif test "$#" = 10 + then + match_glob=$1 + match_iglob=$2 + match_pathmatch=$3 + match_pathmatchi=$4 + match_file_glob=$5 + match_file_iglob=$6 + match_file_pathmatch=$7 + match_file_pathmatchi=$8 + text=$9 + pattern=${10} + fi + + test_expect_success EXPENSIVE_ON_WINDOWS 'cleanup after previous file test' ' + if test -e .git/created_test_file + then + git reset && + git clean -df + fi + ' + + printf '%s' "$text" >.git/expected_test_file + + test_expect_success EXPENSIVE_ON_WINDOWS "setup match file test for $text" ' + file=$(cat .git/expected_test_file) && + if should_create_test_file "$file" + then + dirs=${file%/*} + if test "$file" != "$dirs" + then + mkdir -p -- "$dirs" && + touch -- "./$text" + else + touch -- "./$file" + fi && + git add -A && + printf "%s" "$file" >.git/created_test_file + elif test -e .git/created_test_file + then + rm .git/created_test_file + fi + ' + + # $1: Case sensitive glob match: test-tool wildmatch & ls-files + match_with_function "$text" "$pattern" $match_glob "wildmatch" + match_with_ls_files "$text" "$pattern" $match_file_glob "wildmatch" " --glob-pathspecs" + + # $2: Case insensitive glob match: test-tool wildmatch & ls-files + match_with_function "$text" "$pattern" $match_iglob "iwildmatch" + match_with_ls_files "$text" "$pattern" $match_file_iglob "iwildmatch" " --glob-pathspecs --icase-pathspecs" + + # $3: Case sensitive path match: test-tool wildmatch & ls-files + match_with_function "$text" "$pattern" $match_pathmatch "pathmatch" + match_with_ls_files "$text" "$pattern" $match_file_pathmatch "pathmatch" "" + + # $4: Case insensitive path match: test-tool wildmatch & ls-files + match_with_function "$text" "$pattern" $match_pathmatchi "ipathmatch" + match_with_ls_files "$text" "$pattern" $match_file_pathmatchi "ipathmatch" " --icase-pathspecs" } -# Basic wildmat features -match 1 1 foo foo -match 0 0 foo bar -match 1 1 '' "" -match 1 1 foo '???' -match 0 0 foo '??' -match 1 1 foo '*' -match 1 1 foo 'f*' -match 0 0 foo '*f' -match 1 1 foo '*foo*' -match 1 1 foobar '*ob*a*r*' -match 1 1 aaaaaaabababab '*ab' -match 1 1 'foo*' 'foo\*' -match 0 0 foobar 'foo\*bar' -match 1 1 'f\oo' 'f\\oo' -match 1 1 ball '*[al]?' -match 0 0 ten '[ten]' -match 0 1 ten '**[!te]' -match 0 0 ten '**[!ten]' -match 1 1 ten 't[a-g]n' -match 0 0 ten 't[!a-g]n' -match 1 1 ton 't[!a-g]n' -match 1 1 ton 't[^a-g]n' -match 1 x 'a]b' 'a[]]b' -match 1 x a-b 'a[]-]b' -match 1 x 'a]b' 'a[]-]b' -match 0 x aab 'a[]-]b' -match 1 x aab 'a[]a-]b' -match 1 1 ']' ']' +# Basic wildmatch features +match 1 1 1 1 foo foo +match 0 0 0 0 foo bar +match 1 1 1 1 '' "" +match 1 1 1 1 foo '???' +match 0 0 0 0 foo '??' +match 1 1 1 1 foo '*' +match 1 1 1 1 foo 'f*' +match 0 0 0 0 foo '*f' +match 1 1 1 1 foo '*foo*' +match 1 1 1 1 foobar '*ob*a*r*' +match 1 1 1 1 aaaaaaabababab '*ab' +match 1 1 1 1 'foo*' 'foo\*' +match 0 0 0 0 foobar 'foo\*bar' +match 1 1 1 1 'f\oo' 'f\\oo' +match 1 1 1 1 ball '*[al]?' +match 0 0 0 0 ten '[ten]' +match 0 0 1 1 ten '**[!te]' +match 0 0 0 0 ten '**[!ten]' +match 1 1 1 1 ten 't[a-g]n' +match 0 0 0 0 ten 't[!a-g]n' +match 1 1 1 1 ton 't[!a-g]n' +match 1 1 1 1 ton 't[^a-g]n' +match 1 1 1 1 'a]b' 'a[]]b' +match 1 1 1 1 a-b 'a[]-]b' +match 1 1 1 1 'a]b' 'a[]-]b' +match 0 0 0 0 aab 'a[]-]b' +match 1 1 1 1 aab 'a[]a-]b' +match 1 1 1 1 ']' ']' # Extended slash-matching features -match 0 0 'foo/baz/bar' 'foo*bar' -match 0 0 'foo/baz/bar' 'foo**bar' -match 0 1 'foobazbar' 'foo**bar' -match 1 1 'foo/baz/bar' 'foo/**/bar' -match 1 0 'foo/baz/bar' 'foo/**/**/bar' -match 1 0 'foo/b/a/z/bar' 'foo/**/bar' -match 1 0 'foo/b/a/z/bar' 'foo/**/**/bar' -match 1 0 'foo/bar' 'foo/**/bar' -match 1 0 'foo/bar' 'foo/**/**/bar' -match 0 0 'foo/bar' 'foo?bar' -match 0 0 'foo/bar' 'foo[/]bar' -match 0 0 'foo/bar' 'foo[^a-z]bar' -match 0 0 'foo/bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' -match 1 1 'foo-bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' -match 1 0 'foo' '**/foo' -match 1 x 'XXX/foo' '**/foo' -match 1 0 'bar/baz/foo' '**/foo' -match 0 0 'bar/baz/foo' '*/foo' -match 0 0 'foo/bar/baz' '**/bar*' -match 1 0 'deep/foo/bar/baz' '**/bar/*' -match 0 0 'deep/foo/bar/baz/' '**/bar/*' -match 1 0 'deep/foo/bar/baz/' '**/bar/**' -match 0 0 'deep/foo/bar' '**/bar/*' -match 1 0 'deep/foo/bar/' '**/bar/**' -match 0 0 'foo/bar/baz' '**/bar**' -match 1 0 'foo/bar/baz/x' '*/bar/**' -match 0 0 'deep/foo/bar/baz/x' '*/bar/**' -match 1 0 'deep/foo/bar/baz/x' '**/bar/*/*' +match 0 0 1 1 'foo/baz/bar' 'foo*bar' +match 0 0 1 1 'foo/baz/bar' 'foo**bar' +match 0 0 1 1 'foobazbar' 'foo**bar' +match 1 1 1 1 'foo/baz/bar' 'foo/**/bar' +match 1 1 0 0 'foo/baz/bar' 'foo/**/**/bar' +match 1 1 1 1 'foo/b/a/z/bar' 'foo/**/bar' +match 1 1 1 1 'foo/b/a/z/bar' 'foo/**/**/bar' +match 1 1 0 0 'foo/bar' 'foo/**/bar' +match 1 1 0 0 'foo/bar' 'foo/**/**/bar' +match 0 0 1 1 'foo/bar' 'foo?bar' +match 0 0 1 1 'foo/bar' 'foo[/]bar' +match 0 0 1 1 'foo/bar' 'foo[^a-z]bar' +match 0 0 1 1 'foo/bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' +match 1 1 1 1 'foo-bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' +match 1 1 0 0 'foo' '**/foo' +match 1 1 1 1 'XXX/foo' '**/foo' +match 1 1 1 1 'bar/baz/foo' '**/foo' +match 0 0 1 1 'bar/baz/foo' '*/foo' +match 0 0 1 1 'foo/bar/baz' '**/bar*' +match 1 1 1 1 'deep/foo/bar/baz' '**/bar/*' +match 0 0 1 1 'deep/foo/bar/baz/' '**/bar/*' +match 1 1 1 1 'deep/foo/bar/baz/' '**/bar/**' +match 0 0 0 0 'deep/foo/bar' '**/bar/*' +match 1 1 1 1 'deep/foo/bar/' '**/bar/**' +match 0 0 1 1 'foo/bar/baz' '**/bar**' +match 1 1 1 1 'foo/bar/baz/x' '*/bar/**' +match 0 0 1 1 'deep/foo/bar/baz/x' '*/bar/**' +match 1 1 1 1 'deep/foo/bar/baz/x' '**/bar/*/*' # Various additional tests -match 0 0 'acrt' 'a[c-c]st' -match 1 1 'acrt' 'a[c-c]rt' -match 0 0 ']' '[!]-]' -match 1 x 'a' '[!]-]' -match 0 0 '' '\' -match 0 x '\' '\' -match 0 x 'XXX/\' '*/\' -match 1 x 'XXX/\' '*/\\' -match 1 1 'foo' 'foo' -match 1 1 '@foo' '@foo' -match 0 0 'foo' '@foo' -match 1 1 '[ab]' '\[ab]' -match 1 1 '[ab]' '[[]ab]' -match 1 x '[ab]' '[[:]ab]' -match 0 x '[ab]' '[[::]ab]' -match 1 x '[ab]' '[[:digit]ab]' -match 1 x '[ab]' '[\[:]ab]' -match 1 1 '?a?b' '\??\?b' -match 1 1 'abc' '\a\b\c' -match 0 0 'foo' '' -match 1 0 'foo/bar/baz/to' '**/t[o]' +match 0 0 0 0 'acrt' 'a[c-c]st' +match 1 1 1 1 'acrt' 'a[c-c]rt' +match 0 0 0 0 ']' '[!]-]' +match 1 1 1 1 'a' '[!]-]' +match 0 0 0 0 '' '\' +match 0 0 0 0 \ + 1 1 1 1 '\' '\' +match 0 0 0 0 'XXX/\' '*/\' +match 1 1 1 1 'XXX/\' '*/\\' +match 1 1 1 1 'foo' 'foo' +match 1 1 1 1 '@foo' '@foo' +match 0 0 0 0 'foo' '@foo' +match 1 1 1 1 '[ab]' '\[ab]' +match 1 1 1 1 '[ab]' '[[]ab]' +match 1 1 1 1 '[ab]' '[[:]ab]' +match 0 0 0 0 '[ab]' '[[::]ab]' +match 1 1 1 1 '[ab]' '[[:digit]ab]' +match 1 1 1 1 '[ab]' '[\[:]ab]' +match 1 1 1 1 '?a?b' '\??\?b' +match 1 1 1 1 'abc' '\a\b\c' +match 0 0 0 0 \ + E E E E 'foo' '' +match 1 1 1 1 'foo/bar/baz/to' '**/t[o]' # Character class tests -match 1 x 'a1B' '[[:alpha:]][[:digit:]][[:upper:]]' -match 0 x 'a' '[[:digit:][:upper:][:space:]]' -match 1 x 'A' '[[:digit:][:upper:][:space:]]' -match 1 x '1' '[[:digit:][:upper:][:space:]]' -match 0 x '1' '[[:digit:][:upper:][:spaci:]]' -match 1 x ' ' '[[:digit:][:upper:][:space:]]' -match 0 x '.' '[[:digit:][:upper:][:space:]]' -match 1 x '.' '[[:digit:][:punct:][:space:]]' -match 1 x '5' '[[:xdigit:]]' -match 1 x 'f' '[[:xdigit:]]' -match 1 x 'D' '[[:xdigit:]]' -match 1 x '_' '[[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:graph:][:lower:][:print:][:punct:][:space:][:upper:][:xdigit:]]' -match 1 x '.' '[^[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:lower:][:space:][:upper:][:xdigit:]]' -match 1 x '5' '[a-c[:digit:]x-z]' -match 1 x 'b' '[a-c[:digit:]x-z]' -match 1 x 'y' '[a-c[:digit:]x-z]' -match 0 x 'q' '[a-c[:digit:]x-z]' - -# Additional tests, including some malformed wildmats -match 1 x ']' '[\\-^]' -match 0 0 '[' '[\\-^]' -match 1 x '-' '[\-_]' -match 1 x ']' '[\]]' -match 0 0 '\]' '[\]]' -match 0 0 '\' '[\]]' -match 0 0 'ab' 'a[]b' -match 0 x 'a[]b' 'a[]b' -match 0 x 'ab[' 'ab[' -match 0 0 'ab' '[!' -match 0 0 'ab' '[-' -match 1 1 '-' '[-]' -match 0 0 '-' '[a-' -match 0 0 '-' '[!a-' -match 1 x '-' '[--A]' -match 1 x '5' '[--A]' -match 1 1 ' ' '[ --]' -match 1 1 '$' '[ --]' -match 1 1 '-' '[ --]' -match 0 0 '0' '[ --]' -match 1 x '-' '[---]' -match 1 x '-' '[------]' -match 0 0 'j' '[a-e-n]' -match 1 x '-' '[a-e-n]' -match 1 x 'a' '[!------]' -match 0 0 '[' '[]-a]' -match 1 x '^' '[]-a]' -match 0 0 '^' '[!]-a]' -match 1 x '[' '[!]-a]' -match 1 1 '^' '[a^bc]' -match 1 x '-b]' '[a-]b]' -match 0 0 '\' '[\]' -match 1 1 '\' '[\\]' -match 0 0 '\' '[!\\]' -match 1 1 'G' '[A-\\]' -match 0 0 'aaabbb' 'b*a' -match 0 0 'aabcaa' '*ba*' -match 1 1 ',' '[,]' -match 1 1 ',' '[\\,]' -match 1 1 '\' '[\\,]' -match 1 1 '-' '[,-.]' -match 0 0 '+' '[,-.]' -match 0 0 '-.]' '[,-.]' -match 1 1 '2' '[\1-\3]' -match 1 1 '3' '[\1-\3]' -match 0 0 '4' '[\1-\3]' -match 1 1 '\' '[[-\]]' -match 1 1 '[' '[[-\]]' -match 1 1 ']' '[[-\]]' -match 0 0 '-' '[[-\]]' +match 1 1 1 1 'a1B' '[[:alpha:]][[:digit:]][[:upper:]]' +match 0 1 0 1 'a' '[[:digit:][:upper:][:space:]]' +match 1 1 1 1 'A' '[[:digit:][:upper:][:space:]]' +match 1 1 1 1 '1' '[[:digit:][:upper:][:space:]]' +match 0 0 0 0 '1' '[[:digit:][:upper:][:spaci:]]' +match 1 1 1 1 ' ' '[[:digit:][:upper:][:space:]]' +match 0 0 0 0 '.' '[[:digit:][:upper:][:space:]]' +match 1 1 1 1 '.' '[[:digit:][:punct:][:space:]]' +match 1 1 1 1 '5' '[[:xdigit:]]' +match 1 1 1 1 'f' '[[:xdigit:]]' +match 1 1 1 1 'D' '[[:xdigit:]]' +match 1 1 1 1 '_' '[[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:graph:][:lower:][:print:][:punct:][:space:][:upper:][:xdigit:]]' +match 1 1 1 1 '.' '[^[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:lower:][:space:][:upper:][:xdigit:]]' +match 1 1 1 1 '5' '[a-c[:digit:]x-z]' +match 1 1 1 1 'b' '[a-c[:digit:]x-z]' +match 1 1 1 1 'y' '[a-c[:digit:]x-z]' +match 0 0 0 0 'q' '[a-c[:digit:]x-z]' -# Test recursion and the abort code (use "wildtest -i" to see iteration counts) -match 1 1 '-adobe-courier-bold-o-normal--12-120-75-75-m-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' -match 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-X-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' -match 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-/-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' -match 1 1 'XXX/adobe/courier/bold/o/normal//12/120/75/75/m/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' -match 0 0 'XXX/adobe/courier/bold/o/normal//12/120/75/75/X/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' -match 1 0 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txt' '**/*a*b*g*n*t' -match 0 0 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txtz' '**/*a*b*g*n*t' -match 0 x foo '*/*/*' -match 0 x foo/bar '*/*/*' -match 1 x foo/bba/arr '*/*/*' -match 0 x foo/bb/aa/rr '*/*/*' -match 1 x foo/bb/aa/rr '**/**/**' -match 1 x abcXdefXghi '*X*i' -match 0 x ab/cXd/efXg/hi '*X*i' -match 1 x ab/cXd/efXg/hi '*/*X*/*/*i' -match 1 x ab/cXd/efXg/hi '**/*X*/**/*i' +# Additional tests, including some malformed wildmatch patterns +match 1 1 1 1 ']' '[\\-^]' +match 0 0 0 0 '[' '[\\-^]' +match 1 1 1 1 '-' '[\-_]' +match 1 1 1 1 ']' '[\]]' +match 0 0 0 0 '\]' '[\]]' +match 0 0 0 0 '\' '[\]]' +match 0 0 0 0 'ab' 'a[]b' +match 0 0 0 0 \ + 1 1 1 1 'a[]b' 'a[]b' +match 0 0 0 0 \ + 1 1 1 1 'ab[' 'ab[' +match 0 0 0 0 'ab' '[!' +match 0 0 0 0 'ab' '[-' +match 1 1 1 1 '-' '[-]' +match 0 0 0 0 '-' '[a-' +match 0 0 0 0 '-' '[!a-' +match 1 1 1 1 '-' '[--A]' +match 1 1 1 1 '5' '[--A]' +match 1 1 1 1 ' ' '[ --]' +match 1 1 1 1 '$' '[ --]' +match 1 1 1 1 '-' '[ --]' +match 0 0 0 0 '0' '[ --]' +match 1 1 1 1 '-' '[---]' +match 1 1 1 1 '-' '[------]' +match 0 0 0 0 'j' '[a-e-n]' +match 1 1 1 1 '-' '[a-e-n]' +match 1 1 1 1 'a' '[!------]' +match 0 0 0 0 '[' '[]-a]' +match 1 1 1 1 '^' '[]-a]' +match 0 0 0 0 '^' '[!]-a]' +match 1 1 1 1 '[' '[!]-a]' +match 1 1 1 1 '^' '[a^bc]' +match 1 1 1 1 '-b]' '[a-]b]' +match 0 0 0 0 '\' '[\]' +match 1 1 1 1 '\' '[\\]' +match 0 0 0 0 '\' '[!\\]' +match 1 1 1 1 'G' '[A-\\]' +match 0 0 0 0 'aaabbb' 'b*a' +match 0 0 0 0 'aabcaa' '*ba*' +match 1 1 1 1 ',' '[,]' +match 1 1 1 1 ',' '[\\,]' +match 1 1 1 1 '\' '[\\,]' +match 1 1 1 1 '-' '[,-.]' +match 0 0 0 0 '+' '[,-.]' +match 0 0 0 0 '-.]' '[,-.]' +match 1 1 1 1 '2' '[\1-\3]' +match 1 1 1 1 '3' '[\1-\3]' +match 0 0 0 0 '4' '[\1-\3]' +match 1 1 1 1 '\' '[[-\]]' +match 1 1 1 1 '[' '[[-\]]' +match 1 1 1 1 ']' '[[-\]]' +match 0 0 0 0 '-' '[[-\]]' -pathmatch 1 foo foo -pathmatch 0 foo fo -pathmatch 1 foo/bar foo/bar -pathmatch 1 foo/bar 'foo/*' -pathmatch 1 foo/bba/arr 'foo/*' -pathmatch 1 foo/bba/arr 'foo/**' -pathmatch 1 foo/bba/arr 'foo*' -pathmatch 1 foo/bba/arr 'foo**' -pathmatch 1 foo/bba/arr 'foo/*arr' -pathmatch 1 foo/bba/arr 'foo/**arr' -pathmatch 0 foo/bba/arr 'foo/*z' -pathmatch 0 foo/bba/arr 'foo/**z' -pathmatch 1 foo/bar 'foo?bar' -pathmatch 1 foo/bar 'foo[/]bar' -pathmatch 1 foo/bar 'foo[^a-z]bar' -pathmatch 0 foo '*/*/*' -pathmatch 0 foo/bar '*/*/*' -pathmatch 1 foo/bba/arr '*/*/*' -pathmatch 1 foo/bb/aa/rr '*/*/*' -pathmatch 1 abcXdefXghi '*X*i' -pathmatch 1 ab/cXd/efXg/hi '*/*X*/*/*i' -pathmatch 1 ab/cXd/efXg/hi '*Xg*i' +# Test recursion +match 1 1 1 1 '-adobe-courier-bold-o-normal--12-120-75-75-m-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' +match 0 0 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-X-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' +match 0 0 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-/-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' +match 1 1 1 1 'XXX/adobe/courier/bold/o/normal//12/120/75/75/m/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' +match 0 0 0 0 'XXX/adobe/courier/bold/o/normal//12/120/75/75/X/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' +match 1 1 1 1 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txt' '**/*a*b*g*n*t' +match 0 0 0 0 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txtz' '**/*a*b*g*n*t' +match 0 0 0 0 foo '*/*/*' +match 0 0 0 0 foo/bar '*/*/*' +match 1 1 1 1 foo/bba/arr '*/*/*' +match 0 0 1 1 foo/bb/aa/rr '*/*/*' +match 1 1 1 1 foo/bb/aa/rr '**/**/**' +match 1 1 1 1 abcXdefXghi '*X*i' +match 0 0 1 1 ab/cXd/efXg/hi '*X*i' +match 1 1 1 1 ab/cXd/efXg/hi '*/*X*/*/*i' +match 1 1 1 1 ab/cXd/efXg/hi '**/*X*/**/*i' -# Case-sensitivity features -match 0 x 'a' '[A-Z]' -match 1 x 'A' '[A-Z]' -match 0 x 'A' '[a-z]' -match 1 x 'a' '[a-z]' -match 0 x 'a' '[[:upper:]]' -match 1 x 'A' '[[:upper:]]' -match 0 x 'A' '[[:lower:]]' -match 1 x 'a' '[[:lower:]]' -match 0 x 'A' '[B-Za]' -match 1 x 'a' '[B-Za]' -match 0 x 'A' '[B-a]' -match 1 x 'a' '[B-a]' -match 0 x 'z' '[Z-y]' -match 1 x 'Z' '[Z-y]' +# Extra pathmatch tests +match 0 0 0 0 foo fo +match 1 1 1 1 foo/bar foo/bar +match 1 1 1 1 foo/bar 'foo/*' +match 0 0 1 1 foo/bba/arr 'foo/*' +match 1 1 1 1 foo/bba/arr 'foo/**' +match 0 0 1 1 foo/bba/arr 'foo*' +match 0 0 1 1 \ + 1 1 1 1 foo/bba/arr 'foo**' +match 0 0 1 1 foo/bba/arr 'foo/*arr' +match 0 0 1 1 foo/bba/arr 'foo/**arr' +match 0 0 0 0 foo/bba/arr 'foo/*z' +match 0 0 0 0 foo/bba/arr 'foo/**z' +match 0 0 1 1 foo/bar 'foo?bar' +match 0 0 1 1 foo/bar 'foo[/]bar' +match 0 0 1 1 foo/bar 'foo[^a-z]bar' +match 0 0 1 1 ab/cXd/efXg/hi '*Xg*i' -imatch 1 'a' '[A-Z]' -imatch 1 'A' '[A-Z]' -imatch 1 'A' '[a-z]' -imatch 1 'a' '[a-z]' -imatch 1 'a' '[[:upper:]]' -imatch 1 'A' '[[:upper:]]' -imatch 1 'A' '[[:lower:]]' -imatch 1 'a' '[[:lower:]]' -imatch 1 'A' '[B-Za]' -imatch 1 'a' '[B-Za]' -imatch 1 'A' '[B-a]' -imatch 1 'a' '[B-a]' -imatch 1 'z' '[Z-y]' -imatch 1 'Z' '[Z-y]' +# Extra case-sensitivity tests +match 0 1 0 1 'a' '[A-Z]' +match 1 1 1 1 'A' '[A-Z]' +match 0 1 0 1 'A' '[a-z]' +match 1 1 1 1 'a' '[a-z]' +match 0 1 0 1 'a' '[[:upper:]]' +match 1 1 1 1 'A' '[[:upper:]]' +match 0 1 0 1 'A' '[[:lower:]]' +match 1 1 1 1 'a' '[[:lower:]]' +match 0 1 0 1 'A' '[B-Za]' +match 1 1 1 1 'a' '[B-Za]' +match 0 1 0 1 'A' '[B-a]' +match 1 1 1 1 'a' '[B-a]' +match 0 1 0 1 'z' '[Z-y]' +match 1 1 1 1 'Z' '[Z-y]' test_done diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 5fc2fb425b..c0ef946811 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -6,6 +6,7 @@ test_description='git branch assorted tests' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh test_expect_success 'prepare a trivial repository' ' echo Hello >A && @@ -117,6 +118,16 @@ test_expect_success 'git branch -m bbb should rename checked out branch' ' test_cmp expect actual ' +test_expect_success 'renaming checked out branch works with d/f conflict' ' + test_when_finished "git branch -D foo/bar || git branch -D foo" && + test_when_finished git checkout master && + git checkout -b foo && + git branch -m foo/bar && + git symbolic-ref HEAD >actual && + echo refs/heads/foo/bar >expect && + test_cmp expect actual +' + test_expect_success 'git branch -m o/o o should fail when o/p exists' ' git branch o/o && git branch o/p && @@ -381,6 +392,262 @@ test_expect_success 'config information was renamed, too' ' test_must_fail git config branch.s/s.dummy ' +test_expect_success 'git branch -m correctly renames multiple config sections' ' + test_when_finished "git checkout master" && + git checkout -b source master && + + # Assert that a config file with multiple config sections has + # those sections preserved... + cat >expect <<-\EOF && + branch.dest.key1=value1 + some.gar.b=age + branch.dest.key2=value2 + EOF + cat >config.branch <<\EOF && +;; Note the lack of -\EOF above & mixed indenting here. This is +;; intentional, we are also testing that the formatting of copied +;; sections is preserved. + +;; Comment for source. Tabs +[branch "source"] + ;; Comment for the source value + key1 = value1 +;; Comment for some.gar. Spaces +[some "gar"] + ;; Comment for the some.gar value + b = age +;; Comment for source, again. Mixed tabs/spaces. +[branch "source"] + ;; Comment for the source value, again + key2 = value2 +EOF + cat config.branch >>.git/config && + git branch -m source dest && + git config -f .git/config -l | grep -F -e source -e dest -e some.gar >actual && + test_cmp expect actual && + + # ...and that the comments for those sections are also + # preserved. + cat config.branch | sed "s/\"source\"/\"dest\"/" >expect && + sed -n -e "/Note the lack/,\$p" .git/config >actual && + test_cmp expect actual +' + +test_expect_success 'git branch -c dumps usage' ' + test_expect_code 128 git branch -c 2>err && + test_i18ngrep "branch name required" err +' + +test_expect_success 'git branch --copy dumps usage' ' + test_expect_code 128 git branch --copy 2>err && + test_i18ngrep "branch name required" err +' + +test_expect_success 'git branch -c d e should work' ' + git branch -l d && + git reflog exists refs/heads/d && + git config branch.d.dummy Hello && + git branch -c d e && + git reflog exists refs/heads/d && + git reflog exists refs/heads/e && + echo Hello >expect && + git config branch.e.dummy >actual && + test_cmp expect actual && + echo Hello >expect && + git config branch.d.dummy >actual && + test_cmp expect actual +' + +test_expect_success 'git branch --copy is a synonym for -c' ' + git branch -l copy && + git reflog exists refs/heads/copy && + git config branch.copy.dummy Hello && + git branch --copy copy copy-to && + git reflog exists refs/heads/copy && + git reflog exists refs/heads/copy-to && + echo Hello >expect && + git config branch.copy.dummy >actual && + test_cmp expect actual && + echo Hello >expect && + git config branch.copy-to.dummy >actual && + test_cmp expect actual +' + +test_expect_success 'git branch -c ee ef should copy ee to create branch ef' ' + git checkout -b ee && + git reflog exists refs/heads/ee && + git config branch.ee.dummy Hello && + git branch -c ee ef && + git reflog exists refs/heads/ee && + git reflog exists refs/heads/ef && + test $(git config branch.ee.dummy) = Hello && + test $(git config branch.ef.dummy) = Hello && + test $(git rev-parse --abbrev-ref HEAD) = ee +' + +test_expect_success 'git branch -c f/f g/g should work' ' + git branch -l f/f && + git reflog exists refs/heads/f/f && + git config branch.f/f.dummy Hello && + git branch -c f/f g/g && + git reflog exists refs/heads/f/f && + git reflog exists refs/heads/g/g && + test $(git config branch.f/f.dummy) = Hello && + test $(git config branch.g/g.dummy) = Hello +' + +test_expect_success 'git branch -c m2 m2 should work' ' + git branch -l m2 && + git reflog exists refs/heads/m2 && + git config branch.m2.dummy Hello && + git branch -c m2 m2 && + git reflog exists refs/heads/m2 && + test $(git config branch.m2.dummy) = Hello +' + +test_expect_success 'git branch -c zz zz/zz should fail' ' + git branch -l zz && + git reflog exists refs/heads/zz && + test_must_fail git branch -c zz zz/zz +' + +test_expect_success 'git branch -c b/b b should fail' ' + git branch -l b/b && + test_must_fail git branch -c b/b b +' + +test_expect_success 'git branch -C o/q o/p should work when o/p exists' ' + git branch -l o/q && + git reflog exists refs/heads/o/q && + git reflog exists refs/heads/o/p && + git branch -C o/q o/p +' + +test_expect_success 'git branch -c -f o/q o/p should work when o/p exists' ' + git reflog exists refs/heads/o/q && + git reflog exists refs/heads/o/p && + git branch -c -f o/q o/p +' + +test_expect_success 'git branch -c qq rr/qq should fail when rr exists' ' + git branch qq && + git branch rr && + test_must_fail git branch -c qq rr/qq +' + +test_expect_success 'git branch -C b1 b2 should fail when b2 is checked out' ' + git branch b1 && + git checkout -b b2 && + test_must_fail git branch -C b1 b2 +' + +test_expect_success 'git branch -C c1 c2 should succeed when c1 is checked out' ' + git checkout -b c1 && + git branch c2 && + git branch -C c1 c2 && + test $(git rev-parse --abbrev-ref HEAD) = c1 +' + +test_expect_success 'git branch -C c1 c2 should never touch HEAD' ' + msg="Branch: copied refs/heads/c1 to refs/heads/c2" && + ! grep "$msg$" .git/logs/HEAD +' + +test_expect_success 'git branch -C master should work when master is checked out' ' + git checkout master && + git branch -C master +' + +test_expect_success 'git branch -C master master should work when master is checked out' ' + git checkout master && + git branch -C master master +' + +test_expect_success 'git branch -C master5 master5 should work when master is checked out' ' + git checkout master && + git branch master5 && + git branch -C master5 master5 +' + +test_expect_success 'git branch -C ab cd should overwrite existing config for cd' ' + git branch -l cd && + git reflog exists refs/heads/cd && + git config branch.cd.dummy CD && + git branch -l ab && + git reflog exists refs/heads/ab && + git config branch.ab.dummy AB && + git branch -C ab cd && + git reflog exists refs/heads/ab && + git reflog exists refs/heads/cd && + test $(git config branch.ab.dummy) = AB && + test $(git config branch.cd.dummy) = AB +' + +test_expect_success 'git branch -c correctly copies multiple config sections' ' + FOO=1 && + export FOO && + test_when_finished "git checkout master" && + git checkout -b source2 master && + + # Assert that a config file with multiple config sections has + # those sections preserved... + cat >expect <<-\EOF && + branch.source2.key1=value1 + branch.dest2.key1=value1 + more.gar.b=age + branch.source2.key2=value2 + branch.dest2.key2=value2 + EOF + cat >config.branch <<\EOF && +;; Note the lack of -\EOF above & mixed indenting here. This is +;; intentional, we are also testing that the formatting of copied +;; sections is preserved. + +;; Comment for source2. Tabs +[branch "source2"] + ;; Comment for the source2 value + key1 = value1 +;; Comment for more.gar. Spaces +[more "gar"] + ;; Comment for the more.gar value + b = age +;; Comment for source2, again. Mixed tabs/spaces. +[branch "source2"] + ;; Comment for the source2 value, again + key2 = value2 +EOF + cat config.branch >>.git/config && + git branch -c source2 dest2 && + git config -f .git/config -l | grep -F -e source2 -e dest2 -e more.gar >actual && + test_cmp expect actual && + + # ...and that the comments and formatting for those sections + # is also preserved. + cat >expect <<\EOF && +;; Comment for source2. Tabs +[branch "source2"] + ;; Comment for the source2 value + key1 = value1 +;; Comment for more.gar. Spaces +[branch "dest2"] + ;; Comment for the source2 value + key1 = value1 +;; Comment for more.gar. Spaces +[more "gar"] + ;; Comment for the more.gar value + b = age +;; Comment for source2, again. Mixed tabs/spaces. +[branch "source2"] + ;; Comment for the source2 value, again + key2 = value2 +[branch "dest2"] + ;; Comment for the source2 value, again + key2 = value2 +EOF + sed -n -e "/Comment for source2/,\$p" .git/config >actual && + test_cmp expect actual +' + test_expect_success 'deleting a symref' ' git branch target && git symbolic-ref refs/heads/symref refs/heads/target && @@ -572,6 +839,7 @@ test_expect_success 'use --set-upstream-to modify HEAD' ' test_expect_success 'use --set-upstream-to modify a particular branch' ' git branch my13 && git branch --set-upstream-to master my13 && + test_when_finished "git branch --unset-upstream my13" && test "$(git config branch.my13.remote)" = "." && test "$(git config branch.my13.merge)" = "refs/heads/master" ' @@ -617,38 +885,8 @@ test_expect_success 'test --unset-upstream on a particular branch' ' test_must_fail git config branch.my14.merge ' -test_expect_success '--set-upstream shows message when creating a new branch that exists as remote-tracking' ' - git update-ref refs/remotes/origin/master HEAD && - git branch --set-upstream origin/master 2>actual && - test_when_finished git update-ref -d refs/remotes/origin/master && - test_when_finished git branch -d origin/master && - cat >expected <<EOF && -The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to - -If you wanted to make '"'master'"' track '"'origin/master'"', do this: - - git branch -d origin/master - git branch --set-upstream-to origin/master -EOF - test_i18ncmp expected actual -' - -test_expect_success '--set-upstream with two args only shows the deprecation message' ' - git branch --set-upstream master my13 2>actual && - test_when_finished git branch --unset-upstream master && - cat >expected <<EOF && -The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to -EOF - test_i18ncmp expected actual -' - -test_expect_success '--set-upstream with one arg only shows the deprecation message if the branch existed' ' - git branch --set-upstream my13 2>actual && - test_when_finished git branch --unset-upstream my13 && - cat >expected <<EOF && -The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to -EOF - test_i18ncmp expected actual +test_expect_success '--set-upstream fails' ' + test_must_fail git branch --set-upstream origin/master ' test_expect_success '--set-upstream-to notices an error to set branch as own upstream' ' @@ -973,19 +1211,6 @@ test_expect_success 'attempt to delete a branch merged to its base' ' test_must_fail git branch -d my10 ' -test_expect_success 'use set-upstream on the current branch' ' - git checkout master && - git --bare init myupstream.git && - git push myupstream.git master:refs/heads/frotz && - git remote add origin myupstream.git && - git fetch && - git branch --set-upstream master origin/frotz && - - test "z$(git config branch.master.remote)" = "zorigin" && - test "z$(git config branch.master.merge)" = "zrefs/heads/frotz" - -' - test_expect_success 'use --edit-description' ' write_script editor <<-\EOF && echo "New contents" >"$1" @@ -1022,6 +1247,29 @@ test_expect_success '--merged is incompatible with --no-merged' ' test_must_fail git branch --merged HEAD --no-merged HEAD ' +test_expect_success '--list during rebase' ' + test_when_finished "reset_rebase" && + git checkout master && + FAKE_LINES="1 edit 2" && + export FAKE_LINES && + set_fake_editor && + git rebase -i HEAD~2 && + git branch --list >actual && + test_i18ngrep "rebasing master" actual +' + +test_expect_success '--list during rebase from detached HEAD' ' + test_when_finished "reset_rebase && git checkout master" && + git checkout master^0 && + oid=$(git rev-parse --short HEAD) && + FAKE_LINES="1 edit 2" && + export FAKE_LINES && + set_fake_editor && + git rebase -i HEAD~2 && + git branch --list >actual && + test_i18ngrep "rebasing detached HEAD $oid" actual +' + test_expect_success 'tracking with unexpected .fetch refspec' ' rm -rf a b c d && git init a && diff --git a/t/t3210-pack-refs.sh b/t/t3210-pack-refs.sh index 9b182a0c32..afa27ffe2d 100755 --- a/t/t3210-pack-refs.sh +++ b/t/t3210-pack-refs.sh @@ -194,6 +194,33 @@ test_expect_success 'notice d/f conflict with existing ref' ' test_must_fail git branch foo/bar/baz/lots/of/extra/components ' +test_expect_success 'reject packed-refs with unterminated line' ' + cp .git/packed-refs .git/packed-refs.bak && + test_when_finished "mv .git/packed-refs.bak .git/packed-refs" && + printf "%s" "$HEAD refs/zzzzz" >>.git/packed-refs && + echo "fatal: unterminated line in .git/packed-refs: $HEAD refs/zzzzz" >expected_err && + test_must_fail git for-each-ref >out 2>err && + test_cmp expected_err err +' + +test_expect_success 'reject packed-refs containing junk' ' + cp .git/packed-refs .git/packed-refs.bak && + test_when_finished "mv .git/packed-refs.bak .git/packed-refs" && + printf "%s\n" "bogus content" >>.git/packed-refs && + echo "fatal: unexpected line in .git/packed-refs: bogus content" >expected_err && + test_must_fail git for-each-ref >out 2>err && + test_cmp expected_err err +' + +test_expect_success 'reject packed-refs with a short SHA-1' ' + cp .git/packed-refs .git/packed-refs.bak && + test_when_finished "mv .git/packed-refs.bak .git/packed-refs" && + printf "%.7s %s\n" $HEAD refs/zzzzz >>.git/packed-refs && + printf "fatal: unexpected line in .git/packed-refs: %.7s %s\n" $HEAD refs/zzzzz >expected_err && + test_must_fail git for-each-ref >out 2>err && + test_cmp expected_err err +' + test_expect_success 'timeout if packed-refs.lock exists' ' LOCK=.git/packed-refs.lock && >"$LOCK" && @@ -211,4 +238,19 @@ test_expect_success 'retry acquiring packed-refs.lock' ' git -c core.packedrefstimeout=3000 pack-refs --all --prune ' +test_expect_success SYMLINKS 'pack symlinked packed-refs' ' + # First make sure that symlinking works when reading: + git update-ref refs/heads/loosy refs/heads/master && + git for-each-ref >all-refs-before && + mv .git/packed-refs .git/my-deviant-packed-refs && + ln -s my-deviant-packed-refs .git/packed-refs && + git for-each-ref >all-refs-linked && + test_cmp all-refs-before all-refs-linked && + git pack-refs --all --prune && + git for-each-ref >all-refs-packed && + test_cmp all-refs-before all-refs-packed && + test -h .git/packed-refs && + test "$(readlink .git/packed-refs)" = "my-deviant-packed-refs" +' + test_done diff --git a/t/t3306-notes-prune.sh b/t/t3306-notes-prune.sh index 86bf909ee3..61748088eb 100755 --- a/t/t3306-notes-prune.sh +++ b/t/t3306-notes-prune.sh @@ -22,7 +22,7 @@ test_expect_success 'setup: create a few commits with notes' ' git commit -m 3rd && COMMIT_FILE=.git/objects/5e/e1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && test -f $COMMIT_FILE && - test-chmtime =+0 $COMMIT_FILE && + test-tool chmtime =+0 $COMMIT_FILE && git notes add -m "Note #3" ' diff --git a/t/t3308-notes-merge.sh b/t/t3308-notes-merge.sh index 19aed7ec95..ab946a5153 100755 --- a/t/t3308-notes-merge.sh +++ b/t/t3308-notes-merge.sh @@ -79,7 +79,7 @@ test_expect_success 'fail to merge empty notes ref into empty notes ref (z => y) test_expect_success 'fail to merge into various non-notes refs' ' test_must_fail git -c "core.notesRef=refs/notes" notes merge x && test_must_fail git -c "core.notesRef=refs/notes/" notes merge x && - mkdir -p .git/refs/notes/dir && + git update-ref refs/notes/dir/foo HEAD && test_must_fail git -c "core.notesRef=refs/notes/dir" notes merge x && test_must_fail git -c "core.notesRef=refs/notes/dir/" notes merge x && test_must_fail git -c "core.notesRef=refs/heads/master" notes merge x && diff --git a/t/t3310-notes-merge-manual-resolve.sh b/t/t3310-notes-merge-manual-resolve.sh index baef2d6924..9c1bf6eb3d 100755 --- a/t/t3310-notes-merge-manual-resolve.sh +++ b/t/t3310-notes-merge-manual-resolve.sh @@ -176,7 +176,7 @@ git rev-parse refs/notes/z > pre_merge_z test_expect_success 'merge z into m (== y) with default ("manual") resolver => Conflicting 3-way merge' ' git update-ref refs/notes/m refs/notes/y && git config core.notesRef refs/notes/m && - test_must_fail git notes merge z >output && + test_must_fail git notes merge z >output 2>&1 && # Output should point to where to resolve conflicts test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts @@ -379,7 +379,7 @@ git rev-parse refs/notes/z > pre_merge_z test_expect_success 'redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge' ' git update-ref refs/notes/m refs/notes/y && git config core.notesRef refs/notes/m && - test_must_fail git notes merge z >output && + test_must_fail git notes merge z >output 2>&1 && # Output should point to where to resolve conflicts test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts @@ -413,7 +413,7 @@ git rev-parse refs/notes/y > pre_merge_y git rev-parse refs/notes/z > pre_merge_z test_expect_success 'redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge' ' - test_must_fail git notes merge z >output && + test_must_fail git notes merge z >output 2>&1 && # Output should point to where to resolve conflicts test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts @@ -494,7 +494,7 @@ cp expect_log_y expect_log_m test_expect_success 'redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge' ' git update-ref refs/notes/m refs/notes/y && - test_must_fail git notes merge z >output && + test_must_fail git notes merge z >output 2>&1 && # Output should point to where to resolve conflicts test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts diff --git a/t/t3320-notes-merge-worktrees.sh b/t/t3320-notes-merge-worktrees.sh index b9c3bc2487..10bfc8b947 100755 --- a/t/t3320-notes-merge-worktrees.sh +++ b/t/t3320-notes-merge-worktrees.sh @@ -61,7 +61,7 @@ test_expect_success 'merge z into x while mid-merge on y succeeds' ' ( cd worktree2 && git config core.notesRef refs/notes/x && - test_must_fail git notes merge z 2>&1 >out && + test_must_fail git notes merge z >out 2>&1 && test_i18ngrep "Automatic notes merge failed" out && grep -v "A notes merge into refs/notes/x is already in-progress in" out ) && diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index f5fd15e559..72d9564747 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -255,4 +255,60 @@ test_expect_success 'rebase commit with an ancient timestamp' ' grep "author .* 34567 +0600$" actual ' +test_expect_success 'rebase with "From " line in commit message' ' + git checkout -b preserve-from master~1 && + cat >From_.msg <<EOF && +Somebody embedded an mbox in a commit message + +This is from so-and-so: + +From a@b Mon Sep 17 00:00:00 2001 +From: John Doe <nobody@example.com> +Date: Sat, 11 Nov 2017 00:00:00 +0000 +Subject: not this message + +something +EOF + >From_ && + git add From_ && + git commit -F From_.msg && + git rebase master && + git log -1 --pretty=format:%B >out && + test_cmp From_.msg out +' + +test_expect_success 'rebase--am.sh and --show-current-patch' ' + test_create_repo conflict-apply && + ( + cd conflict-apply && + test_commit init && + echo one >>init.t && + git commit -a -m one && + echo two >>init.t && + git commit -a -m two && + git tag two && + test_must_fail git rebase --onto init HEAD^ && + GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && + grep "show.*$(git rev-parse two)" stderr + ) +' + +test_expect_success 'rebase--merge.sh and --show-current-patch' ' + test_create_repo conflict-merge && + ( + cd conflict-merge && + test_commit init && + echo one >>init.t && + git commit -a -m one && + echo two >>init.t && + git commit -a -m two && + git tag two && + test_must_fail git rebase --merge --onto init HEAD^ && + git rebase --show-current-patch >actual.patch && + GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && + grep "show.*REBASE_HEAD" stderr && + test "$(git rev-parse REBASE_HEAD)" = "$(git rev-parse two)" + ) +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 37821d2454..59c766540e 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -108,6 +108,17 @@ test_expect_success 'rebase -i with the exec command runs from tree root' ' rm -fr subdir ' +test_expect_success 'rebase -i with exec allows git commands in subdirs' ' + test_when_finished "rm -rf subdir" && + test_when_finished "git rebase --abort ||:" && + git checkout master && + mkdir subdir && (cd subdir && + set_fake_editor && + FAKE_LINES="1 exec_cd_subdir_&&_git_rev-parse_--is-inside-work-tree" \ + git rebase -i HEAD^ + ) +' + test_expect_success 'rebase -i with the exec command checks tree cleanness' ' git checkout master && set_fake_editor && @@ -214,6 +225,14 @@ test_expect_success 'stop on conflicting pick' ' test 0 = $(grep -c "^[^#]" < .git/rebase-merge/git-rebase-todo) ' +test_expect_success 'show conflicted patch' ' + GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && + grep "show.*REBASE_HEAD" stderr && + # the original stopped-sha1 is abbreviated + stopped_sha1="$(git rev-parse $(cat ".git/rebase-merge/stopped-sha"))" && + test "$(git rev-parse REBASE_HEAD)" = "$stopped_sha1" +' + test_expect_success 'abort' ' git rebase --abort && test $(git rev-parse new-branch1) = $(git rev-parse HEAD) && @@ -442,6 +461,10 @@ test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messa git rebase -i $base && git cat-file commit HEAD | sed -e 1,/^\$/d > actual-squash-fixup && test_cmp expect-squash-fixup actual-squash-fixup && + git cat-file commit HEAD@{2} | + grep "^# This is a combination of 3 commits\." && + git cat-file commit HEAD@{3} | + grep "^# This is a combination of 2 commits\." && git checkout to-be-rebased && git branch -D squash-fixup ' @@ -688,13 +711,13 @@ test_expect_success 'rebase -i continue with unstaged submodule' ' test_expect_success 'avoid unnecessary reset' ' git checkout master && git reset --hard && - test-chmtime =123456789 file3 && + test-tool chmtime =123456789 file3 && git update-index --refresh && HEAD=$(git rev-parse HEAD) && set_fake_editor && git rebase -i HEAD~4 && test $HEAD = $(git rev-parse HEAD) && - MTIME=$(test-chmtime -v +0 file3 | sed 's/[^0-9].*$//') && + MTIME=$(test-tool chmtime --get file3) && test 123456789 = $MTIME ' @@ -904,10 +927,8 @@ test_expect_success 'rebase --exec works without -i ' ' test_expect_success 'rebase -i --exec without <CMD>' ' git reset --hard execute && set_fake_editor && - test_must_fail git rebase -i --exec 2>tmp && - sed -e "1d" tmp >actual && - test_must_fail git rebase -h >expected && - test_cmp expected actual && + test_must_fail git rebase -i --exec 2>actual && + test_i18ngrep "requires a value" actual && git checkout master ' @@ -1249,20 +1270,35 @@ test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' ' test B = $(git cat-file commit HEAD^ | sed -ne \$p) ' -cat >expect <<EOF -Warning: the command isn't recognized in the following line: - - badcmd $(git rev-list --oneline -1 master~1) - -You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. -Or you can abort the rebase with 'git rebase --abort'. -EOF +test_expect_success 'respects rebase.abbreviateCommands with fixup, squash and exec' ' + rebase_setup_and_clean abbrevcmd && + test_commit "first" file1.txt "first line" first && + test_commit "second" file1.txt "another line" second && + test_commit "fixup! first" file2.txt "first line again" first_fixup && + test_commit "squash! second" file1.txt "another line here" second_squash && + cat >expected <<-EOF && + p $(git rev-list --abbrev-commit -1 first) first + f $(git rev-list --abbrev-commit -1 first_fixup) fixup! first + x git show HEAD + p $(git rev-list --abbrev-commit -1 second) second + s $(git rev-list --abbrev-commit -1 second_squash) squash! second + x git show HEAD + EOF + git checkout abbrevcmd && + set_cat_todo_editor && + test_config rebase.abbreviateCommands true && + test_must_fail git rebase -i --exec "git show HEAD" \ + --autosquash master >actual && + test_cmp expected actual +' test_expect_success 'static check of bad command' ' rebase_setup_and_clean bad-cmd && set_fake_editor && test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \ git rebase -i --root 2>actual && - test_i18ncmp expect actual && + test_i18ngrep "badcmd $(git rev-list --oneline -1 master~1)" actual && + test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual && FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo && git rebase --continue && test E = $(git cat-file commit HEAD | sed -ne \$p) && @@ -1284,20 +1320,13 @@ test_expect_success 'tabs and spaces are accepted in the todolist' ' test E = $(git cat-file commit HEAD | sed -ne \$p) ' -cat >expect <<EOF -Warning: the SHA-1 is missing or isn't a commit in the following line: - - edit XXXXXXX False commit - -You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. -Or you can abort the rebase with 'git rebase --abort'. -EOF - test_expect_success 'static check of bad SHA-1' ' rebase_setup_and_clean bad-sha && set_fake_editor && test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \ git rebase -i --root 2>actual && - test_i18ncmp expect actual && + test_i18ngrep "edit XXXXXXX False commit" actual && + test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual && FAKE_LINES="1 2 4 5 6" git rebase --edit-todo && git rebase --continue && test E = $(git cat-file commit HEAD | sed -ne \$p) @@ -1317,6 +1346,16 @@ test_expect_success 'editor saves as CR/LF' ' SQ="'" test_expect_success 'rebase -i --gpg-sign=<key-id>' ' + test_when_finished "test_might_fail git rebase --abort" && + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ + >out 2>err && + test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err +' + +test_expect_success 'rebase -i --gpg-sign=<key-id> overrides commit.gpgSign' ' + test_when_finished "test_might_fail git rebase --abort" && + test_config commit.gpgsign true && set_fake_editor && FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ >out 2>err && diff --git a/t/t3405-rebase-malformed.sh b/t/t3405-rebase-malformed.sh index ff8c360cd5..cb7c6de84a 100755 --- a/t/t3405-rebase-malformed.sh +++ b/t/t3405-rebase-malformed.sh @@ -3,6 +3,7 @@ test_description='rebase should handle arbitrary git message' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh cat >F <<\EOF This is an example of a commit log message @@ -25,6 +26,7 @@ test_expect_success setup ' test_tick && git commit -m "Initial commit" && git branch diff-in-message && + git branch empty-message-merge && git checkout -b multi-line-subject && cat F >file2 && @@ -45,6 +47,11 @@ test_expect_success setup ' git cat-file commit HEAD | sed -e "1,/^\$/d" >G0 && + git checkout empty-message-merge && + echo file3 >file3 && + git add file3 && + git commit --allow-empty-message -m "" && + git checkout master && echo One >file1 && @@ -69,4 +76,20 @@ test_expect_success 'rebase commit with diff in message' ' test_cmp G G0 ' +test_expect_success 'rebase -m commit with empty message' ' + test_must_fail git rebase -m master empty-message-merge && + git rebase --abort && + git rebase -m --allow-empty-message master empty-message-merge +' + +test_expect_success 'rebase -i commit with empty message' ' + git checkout diff-in-message && + set_fake_editor && + test_must_fail env FAKE_COMMIT_MESSAGE=" " FAKE_LINES="reword 1" \ + git rebase -i HEAD^ && + git rebase --abort && + FAKE_COMMIT_MESSAGE=" " FAKE_LINES="reword 1" \ + git rebase -i --allow-empty-message HEAD^ +' + test_done diff --git a/t/t3408-rebase-multi-line.sh b/t/t3408-rebase-multi-line.sh index 6b84e6042a..e7292f5b9b 100755 --- a/t/t3408-rebase-multi-line.sh +++ b/t/t3408-rebase-multi-line.sh @@ -24,8 +24,23 @@ But otherwise with a sane description." && >elif && git add elif && test_tick && - git commit -m second + git commit -m second && + git checkout -b side2 && + >afile && + git add afile && + test_tick && + git commit -m third && + echo hello >afile && + test_tick && + git commit -a -m fourth && + git checkout -b side-merge && + git reset --hard HEAD^^ && + git merge --no-ff -m "A merge commit log message that has a long +summary that spills over multiple lines. + +But otherwise with a sane description." side2 && + git branch side-merge-original ' test_expect_success rebase ' @@ -37,5 +52,14 @@ test_expect_success rebase ' test_cmp expect actual ' +test_expect_success rebasep ' + + git checkout side-merge && + git rebase -p side && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + git cat-file commit side-merge-original | sed -e "1,/^\$/d" >expect && + test_cmp expect actual + +' test_done diff --git a/t/t3415-rebase-autosquash.sh b/t/t3415-rebase-autosquash.sh index 5848949ec3..e364c12622 100755 --- a/t/t3415-rebase-autosquash.sh +++ b/t/t3415-rebase-autosquash.sh @@ -271,6 +271,18 @@ test_expect_success C_LOCALE_OUTPUT 'autosquash with custom inst format' ' test 2 = $(git cat-file commit HEAD^ | grep squash | wc -l) ' +test_expect_success 'autosquash with empty custom instructionFormat' ' + git reset --hard base && + test_commit empty-instructionFormat-test && + ( + set_cat_todo_editor && + test_must_fail git -c rebase.instructionFormat= \ + rebase --autosquash --force -i HEAD^ >actual && + git log -1 --format="pick %h %s" >expect && + test_cmp expect actual + ) +' + set_backup_editor () { write_script backup-editor.sh <<-\EOF cp "$1" .git/backup-"$(basename "$1")" @@ -278,7 +290,7 @@ set_backup_editor () { test_set_editor "$PWD/backup-editor.sh" } -test_expect_failure 'autosquash with multiple empty patches' ' +test_expect_success 'autosquash with multiple empty patches' ' test_tick && git commit --allow-empty -m "empty" && test_tick && @@ -304,4 +316,18 @@ test_expect_success 'extra spaces after fixup!' ' test $base = $parent ' +test_expect_success 'wrapped original subject' ' + if test -d .git/rebase-merge; then git rebase --abort; fi && + base=$(git rev-parse HEAD) && + echo "wrapped subject" >wrapped && + git add wrapped && + test_tick && + git commit --allow-empty -m "$(printf "To\nfixup")" && + test_tick && + git commit --allow-empty -m "fixup! To fixup" && + git rebase -i --autosquash --keep-empty HEAD~2 && + parent=$(git rev-parse HEAD^) && + test $base = $parent +' + test_done diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh index fcfdd197bd..03bf1b8a3b 100755 --- a/t/t3418-rebase-continue.sh +++ b/t/t3418-rebase-continue.sh @@ -24,7 +24,7 @@ test_expect_success 'interactive rebase --continue works with touched file' ' git checkout master && FAKE_LINES="edit 1" git rebase -i HEAD^ && - test-chmtime =-60 F1 && + test-tool chmtime =-60 F1 && git rebase --continue ' @@ -36,7 +36,7 @@ test_expect_success 'non-interactive rebase --continue works with touched file' test_must_fail git rebase --onto master master topic && echo "Resolved" >F2 && git add F2 && - test-chmtime =-60 F1 && + test-tool chmtime =-60 F1 && git rebase --continue ' @@ -74,6 +74,69 @@ test_expect_success 'rebase --continue remembers merge strategy and options' ' test -f funny.was.run ' +test_expect_success 'rebase passes merge strategy options correctly' ' + rm -fr .git/rebase-* && + git reset --hard commit-new-file-F3-on-topic-branch && + test_commit theirs-to-merge && + git reset --hard HEAD^ && + test_commit some-commit && + test_tick && + git merge --no-ff theirs-to-merge && + FAKE_LINES="1 edit 2 3" git rebase -i -f -p -m \ + -s recursive --strategy-option=theirs HEAD~2 && + test_commit force-change && + git rebase --continue +' + +test_expect_success '--skip after failed fixup cleans commit message' ' + test_when_finished "test_might_fail git rebase --abort" && + git checkout -b with-conflicting-fixup && + test_commit wants-fixup && + test_commit "fixup! wants-fixup" wants-fixup.t 1 wants-fixup-1 && + test_commit "fixup! wants-fixup" wants-fixup.t 2 wants-fixup-2 && + test_commit "fixup! wants-fixup" wants-fixup.t 3 wants-fixup-3 && + test_must_fail env FAKE_LINES="1 fixup 2 squash 4" \ + git rebase -i HEAD~4 && + + : now there is a conflict, and comments in the commit message && + git show HEAD >out && + grep "fixup! wants-fixup" out && + + : skip and continue && + echo "cp \"\$1\" .git/copy.txt" | write_script copy-editor.sh && + (test_set_editor "$PWD/copy-editor.sh" && git rebase --skip) && + + : the user should not have had to edit the commit message && + test_path_is_missing .git/copy.txt && + + : now the comments in the commit message should have been cleaned up && + git show HEAD >out && + ! grep "fixup! wants-fixup" out && + + : now, let us ensure that "squash" is handled correctly && + git reset --hard wants-fixup-3 && + test_must_fail env FAKE_LINES="1 squash 4 squash 2 squash 4" \ + git rebase -i HEAD~4 && + + : the first squash failed, but there are two more in the chain && + (test_set_editor "$PWD/copy-editor.sh" && + test_must_fail git rebase --skip) && + + : not the final squash, no need to edit the commit message && + test_path_is_missing .git/copy.txt && + + : The first squash was skipped, therefore: && + git show HEAD >out && + test_i18ngrep "# This is a combination of 2 commits" out && + + (test_set_editor "$PWD/copy-editor.sh" && git rebase --skip) && + git show HEAD >out && + test_i18ngrep ! "# This is a combination" out && + + : Final squash failed, but there was still a squash && + test_i18ngrep "# This is a combination of 2 commits" .git/copy.txt +' + test_expect_success 'setup rerere database' ' rm -fr .git/rebase-* && git reset --hard commit-new-file-F3-on-topic-branch && diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index 68fe2003ef..e7438ad06a 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -199,7 +199,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_run_rebase failure -p @@ -214,9 +214,10 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m -test_run_rebase failure -i +test_run_rebase success -m +test_run_rebase success -i test_run_rebase failure -p +test_run_rebase success --rebase-merges # m # / diff --git a/t/t3426-rebase-submodule.sh b/t/t3426-rebase-submodule.sh index ebf4f5e4b2..a2bba04ba9 100755 --- a/t/t3426-rebase-submodule.sh +++ b/t/t3426-rebase-submodule.sh @@ -40,4 +40,21 @@ git_rebase_interactive () { test_submodule_switch "git_rebase_interactive" +test_expect_success 'rebase interactive ignores modified submodules' ' + test_when_finished "rm -rf super sub" && + git init sub && + git -C sub commit --allow-empty -m "Initial commit" && + git init super && + git -C super submodule add ../sub && + git -C super config submodule.sub.ignore dirty && + >super/foo && + git -C super add foo && + git -C super commit -m "Initial commit" && + test_commit -C super a && + test_commit -C super b && + test_commit -C super/sub c && + set_fake_editor && + git -C super rebase -i HEAD^^ +' + test_done diff --git a/t/t3428-rebase-signoff.sh b/t/t3428-rebase-signoff.sh index 2afb564701..f6993b7e14 100755 --- a/t/t3428-rebase-signoff.sh +++ b/t/t3428-rebase-signoff.sh @@ -12,6 +12,13 @@ cat >file <<EOF a EOF +# Expected commit message for initial commit after rebase --signoff +cat >expected-initial-signed <<EOF +Initial empty commit + +Signed-off-by: $(git var GIT_COMMITTER_IDENT | sed -e "s/>.*/>/") +EOF + # Expected commit message after rebase --signoff cat >expected-signed <<EOF first @@ -43,4 +50,35 @@ test_expect_success 'rebase --no-signoff does not add a sign-off line' ' test_cmp expected-unsigned actual ' +test_expect_success 'rebase --exec --signoff adds a sign-off line' ' + test_when_finished "rm exec" && + git commit --amend -m "first" && + git rebase --exec "touch exec" --signoff HEAD^ && + test_path_is_file exec && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase --root --signoff adds a sign-off line' ' + git commit --amend -m "first" && + git rebase --root --keep-empty --signoff && + git cat-file commit HEAD^ | sed -e "1,/^\$/d" >actual && + test_cmp expected-initial-signed actual && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase -i --signoff fails' ' + git commit --amend -m "first" && + git rebase -i --signoff HEAD^ && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase -m --signoff fails' ' + git commit --amend -m "first" && + git rebase -m --signoff HEAD^ && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' test_done diff --git a/t/t3430-rebase-merges.sh b/t/t3430-rebase-merges.sh new file mode 100755 index 0000000000..3d4dfdf7be --- /dev/null +++ b/t/t3430-rebase-merges.sh @@ -0,0 +1,244 @@ +#!/bin/sh +# +# Copyright (c) 2018 Johannes E. Schindelin +# + +test_description='git rebase -i --rebase-merges + +This test runs git rebase "interactively", retaining the branch structure by +recreating merge commits. + +Initial setup: + + -- B -- (first) + / \ + A - C - D - E - H (master) + \ / + F - G (second) +' +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + +test_cmp_graph () { + cat >expect && + git log --graph --boundary --format=%s "$@" >output && + sed "s/ *$//" <output >output.trimmed && + test_cmp expect output.trimmed +} + +test_expect_success 'setup' ' + write_script replace-editor.sh <<-\EOF && + mv "$1" "$(git rev-parse --git-path ORIGINAL-TODO)" + cp script-from-scratch "$1" + EOF + + test_commit A && + git checkout -b first && + test_commit B && + git checkout master && + test_commit C && + test_commit D && + git merge --no-commit B && + test_tick && + git commit -m E && + git tag -m E E && + git checkout -b second C && + test_commit F && + test_commit G && + git checkout master && + git merge --no-commit G && + test_tick && + git commit -m H && + git tag -m H H +' + +test_expect_success 'create completely different structure' ' + cat >script-from-scratch <<-\EOF && + label onto + + # onebranch + pick G + pick D + label onebranch + + # second + reset onto + pick B + label second + + reset onto + merge -C H second + merge onebranch # Merge the topic branch '\''onebranch'\'' + EOF + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + git rebase -i -r A && + test_cmp_graph <<-\EOF + * Merge the topic branch '\''onebranch'\'' + |\ + | * D + | * G + * | H + |\ \ + | |/ + |/| + | * B + |/ + * A + EOF +' + +test_expect_success 'generate correct todo list' ' + cat >expect <<-\EOF && + label onto + + reset onto + pick d9df450 B + label E + + reset onto + pick 5dee784 C + label branch-point + pick ca2c861 F + pick 088b00a G + label H + + reset branch-point # C + pick 12bd07b D + merge -C 2051b56 E # E + merge -C 233d48a H # H + + EOF + + grep -v "^#" <.git/ORIGINAL-TODO >output && + test_cmp expect output +' + +test_expect_success '`reset` refuses to overwrite untracked files' ' + git checkout -b refuse-to-reset && + test_commit dont-overwrite-untracked && + git checkout @{-1} && + : >dont-overwrite-untracked.t && + echo "reset refs/tags/dont-overwrite-untracked" >script-from-scratch && + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_must_fail git rebase -r HEAD && + git rebase --abort +' + +test_expect_success 'failed `merge` writes patch (may be rescheduled, too)' ' + test_when_finished "test_might_fail git rebase --abort" && + git checkout -b conflicting-merge A && + + : fail because of conflicting untracked file && + >G.t && + echo "merge -C H G" >script-from-scratch && + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + test_must_fail git rebase -ir HEAD && + grep "^merge -C .* G$" .git/rebase-merge/done && + grep "^merge -C .* G$" .git/rebase-merge/git-rebase-todo && + test_path_is_file .git/rebase-merge/patch && + + : fail because of merge conflict && + rm G.t .git/rebase-merge/patch && + git reset --hard && + test_commit conflicting-G G.t not-G conflicting-G && + test_must_fail git rebase --continue && + ! grep "^merge -C .* G$" .git/rebase-merge/git-rebase-todo && + test_path_is_file .git/rebase-merge/patch +' + +test_expect_success 'with a branch tip that was cherry-picked already' ' + git checkout -b already-upstream master && + base="$(git rev-parse --verify HEAD)" && + + test_commit A1 && + test_commit A2 && + git reset --hard $base && + test_commit B1 && + test_tick && + git merge -m "Merge branch A" A2 && + + git checkout -b upstream-with-a2 $base && + test_tick && + git cherry-pick A2 && + + git checkout already-upstream && + test_tick && + git rebase -i -r upstream-with-a2 && + test_cmp_graph upstream-with-a2.. <<-\EOF + * Merge branch A + |\ + | * A1 + * | B1 + |/ + o A2 + EOF +' + +test_expect_success 'do not rebase cousins unless asked for' ' + git checkout -b cousins master && + before="$(git rev-parse --verify HEAD)" && + test_tick && + git rebase -r HEAD^ && + test_cmp_rev HEAD $before && + test_tick && + git rebase --rebase-merges=rebase-cousins HEAD^ && + test_cmp_graph HEAD^.. <<-\EOF + * Merge the topic branch '\''onebranch'\'' + |\ + | * D + | * G + |/ + o H + EOF +' + +test_expect_success 'refs/rewritten/* is worktree-local' ' + git worktree add wt && + cat >wt/script-from-scratch <<-\EOF && + label xyz + exec GIT_DIR=../.git git rev-parse --verify refs/rewritten/xyz >a || : + exec git rev-parse --verify refs/rewritten/xyz >b + EOF + + test_config -C wt sequence.editor \""$PWD"/replace-editor.sh\" && + git -C wt rebase -i HEAD && + test_must_be_empty wt/a && + test_cmp_rev HEAD "$(cat wt/b)" +' + +test_expect_success 'post-rewrite hook and fixups work for merges' ' + git checkout -b post-rewrite && + test_commit same1 && + git reset --hard HEAD^ && + test_commit same2 && + git merge -m "to fix up" same1 && + echo same old same old >same2.t && + test_tick && + git commit --fixup HEAD same2.t && + fixup="$(git rev-parse HEAD)" && + + mkdir -p .git/hooks && + test_when_finished "rm .git/hooks/post-rewrite" && + echo "cat >actual" | write_script .git/hooks/post-rewrite && + + test_tick && + git rebase -i --autosquash -r HEAD^^^ && + printf "%s %s\n%s %s\n%s %s\n%s %s\n" >expect $(git rev-parse \ + $fixup^^2 HEAD^2 \ + $fixup^^ HEAD^ \ + $fixup^ HEAD \ + $fixup HEAD) && + test_cmp expect actual +' + +test_expect_success 'refuse to merge ancestors of HEAD' ' + echo "merge HEAD^" >script-from-scratch && + test_config -C wt sequence.editor \""$PWD"/replace-editor.sh\" && + before="$(git rev-parse HEAD)" && + git rebase -i HEAD && + test_cmp_rev HEAD $before +' + +test_done diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index 4f2a263b63..d1c68af8c5 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -86,7 +86,7 @@ test_expect_success 'cherry-pick on stat-dirty working tree' ' ( cd copy && git checkout initial && - test-chmtime +40 oops && + test-tool chmtime +40 oops && git cherry-pick added ) ' @@ -150,7 +150,9 @@ test_expect_success 'cherry-pick works with dirty renamed file' ' test_tick && git commit -m renamed && echo modified >renamed && - git cherry-pick refs/heads/unrelated + git cherry-pick refs/heads/unrelated >out && + test $(git rev-parse :0:renamed) = $(git rev-parse HEAD~2:to-rename.t) && + grep -q "^modified$" renamed ' test_done diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index 0acf4b1461..21b4f194a2 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -247,9 +247,9 @@ test_expect_success '--abort after last commit in sequence' ' test_expect_success 'cherry-pick does not implicitly stomp an existing operation' ' pristine_detach initial && test_expect_code 1 git cherry-pick base..anotherpick && - test-chmtime -v +0 .git/sequencer >expect && + test-tool chmtime --get .git/sequencer >expect && test_expect_code 128 git cherry-pick unrelatedpick && - test-chmtime -v +0 .git/sequencer >actual && + test-tool chmtime --get .git/sequencer >actual && test_cmp expect actual ' diff --git a/t/t3512-cherry-pick-submodule.sh b/t/t3512-cherry-pick-submodule.sh index 6863b7bb6f..bd78287841 100755 --- a/t/t3512-cherry-pick-submodule.sh +++ b/t/t3512-cherry-pick-submodule.sh @@ -5,9 +5,44 @@ test_description='cherry-pick can handle submodules' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-submodule-update.sh -KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 test_submodule_switch "git cherry-pick" +test_expect_success 'unrelated submodule/file conflict is ignored' ' + test_create_repo sub && + + touch sub/file && + git -C sub add file && + git -C sub commit -m "add a file in a submodule" && + + test_create_repo a_repo && + ( + cd a_repo && + >a_file && + git add a_file && + git commit -m "add a file" && + + git branch test && + git checkout test && + + mkdir sub && + >sub/content && + git add sub/content && + git commit -m "add a regular folder with name sub" && + + echo "123" >a_file && + git add a_file && + git commit -m "modify a file" && + + git checkout master && + + git submodule add ../sub sub && + git submodule update sub && + git commit -m "add a submodule info folder with name sub" && + + git cherry-pick test + ) +' + test_done diff --git a/t/t3513-revert-submodule.sh b/t/t3513-revert-submodule.sh index db9378142a..5e39fcdb66 100755 --- a/t/t3513-revert-submodule.sh +++ b/t/t3513-revert-submodule.sh @@ -25,7 +25,6 @@ git_revert () { git revert HEAD } -KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 test_submodule_switch "git_revert" diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index f8568f8841..b8fbdefcdc 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -232,7 +232,7 @@ test_expect_success 'Call "rm" from outside the work tree' ' test_expect_success 'refresh index before checking if it is up-to-date' ' git reset --hard && - test-chmtime -86400 frotz/nitfol && + test-tool chmtime -86400 frotz/nitfol && git rm frotz/nitfol && test ! -f frotz/nitfol @@ -688,7 +688,7 @@ test_expect_success 'checking out a commit after submodule removal needs manual git submodule update && git checkout -q HEAD^ && git checkout -q master 2>actual && - test_i18ngrep "^warning: unable to rmdir submod:" actual && + test_i18ngrep "^warning: unable to rmdir '\''submod'\'':" actual && git status -s submod >actual && echo "?? submod/" >expected && test_cmp expected actual && @@ -858,9 +858,8 @@ test_expect_success 'rm files with two different errors' ' test_i18ncmp expect actual ' -test_expect_success 'rm empty string should invoke warning' ' - git rm -rf "" 2>output && - test_i18ngrep "warning: empty strings" output +test_expect_success 'rm empty string should fail' ' + test_must_fail git rm -rf "" ' test_done diff --git a/t/t3700-add.sh b/t/t3700-add.sh index 0aae21d698..07af05d7ae 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -187,7 +187,7 @@ test_expect_success 'git add --refresh with pathspec' ' echo >foo && echo >bar && echo >baz && git add foo bar baz && H=$(git rev-parse :foo) && git rm -f foo && echo "100644 $H 3 foo" | git update-index --index-info && - test-chmtime -60 bar baz && + test-tool chmtime -60 bar baz && >expect && git add --refresh bar >actual && test_cmp expect actual && @@ -331,9 +331,8 @@ test_expect_success 'git add --dry-run --ignore-missing of non-existing file out test_i18ncmp expect.err actual.err ' -test_expect_success 'git add empty string should invoke warning' ' - git add "" 2>output && - test_i18ngrep "warning: empty strings" output +test_expect_success 'git add empty string should fail' ' + test_must_fail git add "" ' test_expect_success 'git add --chmod=[+-]x stages correctly' ' diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index a49c12c79b..b170fb02b8 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -10,6 +10,19 @@ then test_done fi +diff_cmp () { + for x + do + sed -e '/^index/s/[0-9a-f]*[1-9a-f][0-9a-f]*\.\./1234567../' \ + -e '/^index/s/\.\.[0-9a-f]*[1-9a-f][0-9a-f]*/..9abcdef/' \ + -e '/^index/s/ 00*\.\./ 0000000../' \ + -e '/^index/s/\.\.00*$/..0000000/' \ + -e '/^index/s/\.\.00* /..0000000 /' \ + "$x" >"$x.filtered" + done + test_cmp "$1.filtered" "$2.filtered" +} + test_expect_success 'setup (initial)' ' echo content >file && git add file && @@ -22,20 +35,20 @@ test_expect_success 'status works (initial)' ' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -new file mode 100644 -index 0000000..d95f3ad ---- /dev/null -+++ b/file -@@ -0,0 +1 @@ -+content -EOF + cat >expected <<-\EOF + new file mode 100644 + index 0000000..d95f3ad + --- /dev/null + +++ b/file + @@ -0,0 +1 @@ + +content + EOF ' test_expect_success 'diff works (initial)' ' (echo d; echo 1) | git add -i >output && sed -ne "/new file/,/content/p" <output >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'revert works (initial)' ' git add file && @@ -59,20 +72,20 @@ test_expect_success 'status works (commit)' ' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -index 180b47c..b6f2c08 100644 ---- a/file -+++ b/file -@@ -1 +1,2 @@ - baseline -+content -EOF + cat >expected <<-\EOF + index 180b47c..b6f2c08 100644 + --- a/file + +++ b/file + @@ -1 +1,2 @@ + baseline + +content + EOF ' test_expect_success 'diff works (commit)' ' (echo d; echo 1) | git add -i >output && sed -ne "/^index/,/content/p" <output >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'revert works (commit)' ' git add file && @@ -83,39 +96,32 @@ test_expect_success 'revert works (commit)' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -EOF -' - -test_expect_success 'setup fake editor' ' - >fake_editor.sh && - chmod a+x fake_editor.sh && - test_set_editor "$(pwd)/fake_editor.sh" + cat >expected <<-\EOF + EOF ' test_expect_success 'dummy edit works' ' + test_set_editor : && (echo e; echo a) | git add -p && git diff > diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'setup patch' ' -cat >patch <<EOF -@@ -1,1 +1,4 @@ - this -+patch --does not - apply -EOF + cat >patch <<-\EOF + @@ -1,1 +1,4 @@ + this + +patch + -does not + apply + EOF ' test_expect_success 'setup fake editor' ' - echo "#!$SHELL_PATH" >fake_editor.sh && - cat >>fake_editor.sh <<\EOF && -mv -f "$1" oldpatch && -mv -f patch "$1" -EOF - chmod a+x fake_editor.sh && + write_script "fake_editor.sh" <<-\EOF && + mv -f "$1" oldpatch && + mv -f patch "$1" + EOF test_set_editor "$(pwd)/fake_editor.sh" ' @@ -126,10 +132,10 @@ test_expect_success 'bad edit rejected' ' ' test_expect_success 'setup patch' ' -cat >patch <<EOF -this patch -is garbage -EOF + cat >patch <<-\EOF + this patch + is garbage + EOF ' test_expect_success 'garbage edit rejected' ' @@ -139,34 +145,34 @@ test_expect_success 'garbage edit rejected' ' ' test_expect_success 'setup patch' ' -cat >patch <<EOF -@@ -1,0 +1,0 @@ - baseline -+content -+newcontent -+lines -EOF + cat >patch <<-\EOF + @@ -1,0 +1,0 @@ + baseline + +content + +newcontent + +lines + EOF ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/file b/file -index b5dd6c9..f910ae9 100644 ---- a/file -+++ b/file -@@ -1,4 +1,4 @@ - baseline - content --newcontent -+more - lines -EOF + cat >expected <<-\EOF + diff --git a/file b/file + index b5dd6c9..f910ae9 100644 + --- a/file + +++ b/file + @@ -1,4 +1,4 @@ + baseline + content + -newcontent + +more + lines + EOF ' test_expect_success 'real edit works' ' (echo e; echo n; echo d) | git add -p && git diff >output && - test_cmp expected output + diff_cmp expected output ' test_expect_success 'skip files similarly as commit -a' ' @@ -178,7 +184,7 @@ test_expect_success 'skip files similarly as commit -a' ' git reset && git commit -am commit && git diff >expected && - test_cmp expected output && + diff_cmp expected output && git reset --hard HEAD^ ' rm -f .gitignore @@ -222,52 +228,67 @@ test_expect_success 'setup again' ' # Write the patch file with a new line at the top and bottom test_expect_success 'setup patch' ' -cat >patch <<EOF -index 180b47c..b6f2c08 100644 ---- a/file -+++ b/file -@@ -1,2 +1,4 @@ -+firstline - baseline - content -+lastline -EOF -' - -# Expected output, similar to the patch but w/ diff at the top + cat >patch <<-\EOF + index 180b47c..b6f2c08 100644 + --- a/file + +++ b/file + @@ -1,2 +1,4 @@ + +firstline + baseline + content + +lastline + \ No newline at end of file + EOF +' + +# Expected output, diff is similar to the patch but w/ diff at the top test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/file b/file -index b6f2c08..61b9053 100755 ---- a/file -+++ b/file -@@ -1,2 +1,4 @@ -+firstline - baseline - content -+lastline -EOF + echo diff --git a/file b/file >expected && + cat patch |sed "/^index/s/ 100644/ 100755/" >>expected && + cat >expected-output <<-\EOF + --- a/file + +++ b/file + @@ -1,2 +1,4 @@ + +firstline + baseline + content + +lastline + \ No newline at end of file + @@ -1,2 +1,3 @@ + +firstline + baseline + content + @@ -1,2 +2,3 @@ + baseline + content + +lastline + \ No newline at end of file + EOF ' # Test splitting the first patch, then adding both -test_expect_success 'add first line works' ' +test_expect_success C_LOCALE_OUTPUT 'add first line works' ' git commit -am "clear local changes" && git apply patch && - (echo s; echo y; echo y) | git add -p file && - git diff --cached > diff && - test_cmp expected diff + printf "%s\n" s y y | git add -p file 2>error | + sed -n -e "s/^Stage this hunk[^@]*\(@@ .*\)/\1/" \ + -e "/^[-+@ \\\\]"/p >output && + test_must_be_empty error && + git diff --cached >diff && + diff_cmp expected diff && + test_cmp expected-output output ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/non-empty b/non-empty -deleted file mode 100644 -index d95f3ad..0000000 ---- a/non-empty -+++ /dev/null -@@ -1 +0,0 @@ --content -EOF + cat >expected <<-\EOF + diff --git a/non-empty b/non-empty + deleted file mode 100644 + index d95f3ad..0000000 + --- a/non-empty + +++ /dev/null + @@ -1 +0,0 @@ + -content + EOF ' test_expect_success 'deleting a non-empty file' ' @@ -278,15 +299,15 @@ test_expect_success 'deleting a non-empty file' ' rm non-empty && echo y | git add -p non-empty && git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/empty b/empty -deleted file mode 100644 -index e69de29..0000000 -EOF + cat >expected <<-\EOF + diff --git a/empty b/empty + deleted file mode 100644 + index e69de29..0000000 + EOF ' test_expect_success 'deleting an empty file' ' @@ -297,23 +318,17 @@ test_expect_success 'deleting an empty file' ' rm empty && echo y | git add -p empty && git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'split hunk setup' ' git reset --hard && - for i in 10 20 30 40 50 60 - do - echo $i - done >test && + test_write_lines 10 20 30 40 50 60 >test && git add test && test_tick && git commit -m test && - for i in 10 15 20 21 22 23 24 30 40 50 60 - do - echo $i - done >test + test_write_lines 10 15 20 21 22 23 24 30 40 50 60 >test ' test_expect_success 'split hunk "add -p (edit)"' ' @@ -334,17 +349,7 @@ test_expect_success 'split hunk "add -p (edit)"' ' ' test_expect_failure 'split hunk "add -p (no, yes, edit)"' ' - cat >test <<-\EOF && - 5 - 10 - 20 - 21 - 30 - 31 - 40 - 50 - 60 - EOF + test_write_lines 5 10 20 21 30 31 40 50 60 >test && git reset && # test sequence is s(plit), n(o), y(es), e(dit) # q n q q is there to make sure we exit at the end. @@ -378,7 +383,7 @@ test_expect_success 'patch mode ignores unmerged entries' ' +changed EOF git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success TTY 'diffs can be colorized' ' @@ -392,6 +397,26 @@ test_expect_success TTY 'diffs can be colorized' ' grep "$(printf "\\033")" output ' +test_expect_success TTY 'diffFilter filters diff' ' + git reset --hard && + + echo content >test && + test_config interactive.diffFilter "sed s/^/foo:/" && + printf y | test_terminal git add -p >output 2>&1 && + + # avoid depending on the exact coloring or content of the prompts, + # and just make sure we saw our diff prefixed + grep foo:.*content output +' + +test_expect_success TTY 'detect bogus diffFilter output' ' + git reset --hard && + + echo content >test && + test_config interactive.diffFilter "echo too-short" && + printf y | test_must_fail test_terminal git add -p +' + test_expect_success 'patch-mode via -i prompts for files' ' git reset --hard && @@ -407,7 +432,7 @@ test_expect_success 'patch-mode via -i prompts for files' ' echo test >expect && git diff --cached --name-only >actual && - test_cmp expect actual + diff_cmp expect actual ' test_expect_success 'add -p handles globs' ' @@ -493,4 +518,82 @@ test_expect_success 'add -p works even with color.ui=always' ' test_cmp expect actual ' +test_expect_success 'setup different kinds of dirty submodules' ' + test_create_repo for-submodules && + ( + cd for-submodules && + test_commit initial && + test_create_repo dirty-head && + ( + cd dirty-head && + test_commit initial + ) && + cp -R dirty-head dirty-otherwise && + cp -R dirty-head dirty-both-ways && + git add dirty-head && + git add dirty-otherwise dirty-both-ways && + git commit -m initial && + + cd dirty-head && + test_commit updated && + cd ../dirty-both-ways && + test_commit updated && + echo dirty >>initial && + : >untracked && + cd ../dirty-otherwise && + echo dirty >>initial && + : >untracked + ) && + git -C for-submodules diff-files --name-only >actual && + cat >expected <<-\EOF && + dirty-both-ways + dirty-head + dirty-otherwise + EOF + test_cmp expected actual && + git -C for-submodules diff-files --name-only --ignore-submodules=dirty >actual && + cat >expected <<-\EOF && + dirty-both-ways + dirty-head + EOF + test_cmp expected actual +' + +test_expect_success 'status ignores dirty submodules (except HEAD)' ' + git -C for-submodules add -i </dev/null >output && + grep dirty-head output && + grep dirty-both-ways output && + ! grep dirty-otherwise output +' + +test_expect_success 'set up pathological context' ' + git reset --hard && + test_write_lines a a a a a a a a a a a >a && + git add a && + git commit -m a && + test_write_lines c b a a a a a a a b a a a a >a && + test_write_lines a a a a a a a b a a a a >expected-1 && + test_write_lines b a a a a a a a b a a a a >expected-2 && + # check editing can cope with missing header and deleted context lines + # as well as changes to other lines + test_write_lines +b " a" >patch +' + +test_expect_success 'add -p works with pathological context lines' ' + git reset && + printf "%s\n" n y | + git add -p && + git cat-file blob :a >actual && + test_cmp expected-1 actual +' + +test_expect_success 'add -p patch editing works with pathological context lines' ' + git reset && + # n q q below is in case edit fails + printf "%s\n" e y n q q | + git add -p && + git cat-file blob :a >actual && + test_cmp expected-2 actual +' + test_done diff --git a/t/t3900-i18n-commit.sh b/t/t3900-i18n-commit.sh index 3b94283e35..b92ff95977 100755 --- a/t/t3900-i18n-commit.sh +++ b/t/t3900-i18n-commit.sh @@ -40,7 +40,7 @@ test_expect_success 'UTF-16 refused because of NULs' ' ' test_expect_success 'UTF-8 invalid characters refused' ' - test_when_finished "rm -f $HOME/stderr $HOME/invalid" && + test_when_finished "rm -f \"\$HOME/stderr\" \"\$HOME/invalid\"" && echo "UTF-8 characters" >F && printf "Commit message\n\nInvalid surrogate:\355\240\200\n" \ >"$HOME/invalid" && @@ -49,7 +49,7 @@ test_expect_success 'UTF-8 invalid characters refused' ' ' test_expect_success 'UTF-8 overlong sequences rejected' ' - test_when_finished "rm -f $HOME/stderr $HOME/invalid" && + test_when_finished "rm -f \"\$HOME/stderr\" \"\$HOME/invalid\"" && rm -f "$HOME/stderr" "$HOME/invalid" && echo "UTF-8 overlong" >F && printf "\340\202\251ommit message\n\nThis is not a space:\300\240\n" \ @@ -59,7 +59,7 @@ test_expect_success 'UTF-8 overlong sequences rejected' ' ' test_expect_success 'UTF-8 non-characters refused' ' - test_when_finished "rm -f $HOME/stderr $HOME/invalid" && + test_when_finished "rm -f \"\$HOME/stderr\" \"\$HOME/invalid\"" && echo "UTF-8 non-character 1" >F && printf "Commit message\n\nNon-character:\364\217\277\276\n" \ >"$HOME/invalid" && @@ -68,7 +68,7 @@ test_expect_success 'UTF-8 non-characters refused' ' ' test_expect_success 'UTF-8 non-characters refused' ' - test_when_finished "rm -f $HOME/stderr $HOME/invalid" && + test_when_finished "rm -f \"\$HOME/stderr\" \"\$HOME/invalid\"" && echo "UTF-8 non-character 2." >F && printf "Commit message\n\nNon-character:\357\267\220\n" \ >"$HOME/invalid" && diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 4046817d70..aefde7b172 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -444,6 +444,14 @@ test_expect_failure 'stash file to directory' ' test foo = "$(cat file/file)" ' +test_expect_success 'stash create - no changes' ' + git stash clear && + test_when_finished "git reset --hard HEAD" && + git reset --hard && + git stash create >actual && + test_must_be_empty actual +' + test_expect_success 'stash branch - no stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && @@ -648,6 +656,20 @@ test_expect_success 'stash branch should not drop the stash if the branch exists git rev-parse stash@{0} -- ' +test_expect_success 'stash branch should not drop the stash if the apply fails' ' + git stash clear && + git reset HEAD~1 --hard && + echo foo >file && + git add file && + git commit -m initial && + echo bar >file && + git stash && + echo baz >file && + test_when_finished "git checkout master" && + test_must_fail git stash branch new_branch stash@{0} && + git rev-parse stash@{0} -- +' + test_expect_success 'stash apply shows status same as git status (relative to current directory)' ' git stash clear && echo 1 >subdir/subfile1 && @@ -782,6 +804,99 @@ test_expect_success 'push -m shows right message' ' test_cmp expect actual ' +test_expect_success 'push -m also works without space' ' + >foo && + git add foo && + git stash push -m"unspaced test message" && + echo "stash@{0}: On master: unspaced test message" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'store -m foo shows right message' ' + git stash clear && + git reset --hard && + echo quux >bazzy && + git add bazzy && + STASH_ID=$(git stash create) && + git stash store -m "store m" $STASH_ID && + echo "stash@{0}: store m" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'store -mfoo shows right message' ' + git stash clear && + git reset --hard && + echo quux >bazzy && + git add bazzy && + STASH_ID=$(git stash create) && + git stash store -m"store mfoo" $STASH_ID && + echo "stash@{0}: store mfoo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'store --message=foo shows right message' ' + git stash clear && + git reset --hard && + echo quux >bazzy && + git add bazzy && + STASH_ID=$(git stash create) && + git stash store --message="store message=foo" $STASH_ID && + echo "stash@{0}: store message=foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'store --message foo shows right message' ' + git stash clear && + git reset --hard && + echo quux >bazzy && + git add bazzy && + STASH_ID=$(git stash create) && + git stash store --message "store message foo" $STASH_ID && + echo "stash@{0}: store message foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'push -mfoo uses right message' ' + >foo && + git add foo && + git stash push -m"test mfoo" && + echo "stash@{0}: On master: test mfoo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'push --message foo is synonym for -mfoo' ' + >foo && + git add foo && + git stash push --message "test message foo" && + echo "stash@{0}: On master: test message foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'push --message=foo is synonym for -mfoo' ' + >foo && + git add foo && + git stash push --message="test message=foo" && + echo "stash@{0}: On master: test message=foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'push -m shows right message' ' + >foo && + git add foo && + git stash push -m "test m foo" && + echo "stash@{0}: On master: test m foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + test_expect_success 'create stores correct message' ' >foo && git add foo && @@ -800,6 +915,18 @@ test_expect_success 'create with multiple arguments for the message' ' test_cmp expect actual ' +test_expect_success 'create in a detached state' ' + test_when_finished "git checkout master" && + git checkout HEAD~1 && + >foo && + git add foo && + STASH_ID=$(git stash create) && + HEAD_ID=$(git rev-parse --short HEAD) && + echo "WIP on (no branch): ${HEAD_ID} initial" >expect && + git show --pretty=%s -s ${STASH_ID} >actual && + test_cmp expect actual +' + test_expect_success 'stash -- <pathspec> stashes and restores the file' ' >foo && >bar && @@ -937,4 +1064,36 @@ test_expect_success 'stash -k -- <pathspec> leaves unstaged files intact' ' test foo,bar = $(cat foo),$(cat bar) ' +test_expect_success 'stash -- <subdir> leaves untracked files in subdir intact' ' + git reset && + >subdir/untracked && + >subdir/tracked1 && + >subdir/tracked2 && + git add subdir/tracked* && + git stash -- subdir/ && + test_path_is_missing subdir/tracked1 && + test_path_is_missing subdir/tracked2 && + test_path_is_file subdir/untracked && + git stash pop && + test_path_is_file subdir/tracked1 && + test_path_is_file subdir/tracked2 && + test_path_is_file subdir/untracked +' + +test_expect_success 'stash -- <subdir> works with binary files' ' + git reset && + >subdir/untracked && + >subdir/tracked && + cp "$TEST_DIRECTORY"/test-binary-1.png subdir/tracked-binary && + git add subdir/tracked* && + git stash -- subdir/ && + test_path_is_missing subdir/tracked && + test_path_is_missing subdir/tracked-binary && + test_path_is_file subdir/untracked && + git stash pop && + test_path_is_file subdir/tracked && + test_path_is_file subdir/tracked-binary && + test_path_is_file subdir/untracked +' + test_done diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index 193adc7b68..3ea5b9bb3f 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -211,4 +211,73 @@ test_expect_success 'stash push with $IFS character' ' test_path_is_file bar ' +cat > .gitignore <<EOF +ignored +ignored.d/* +EOF + +test_expect_success 'stash previously ignored file' ' + git reset HEAD && + git add .gitignore && + git commit -m "Add .gitignore" && + >ignored.d/foo && + echo "!ignored.d/foo" >> .gitignore && + git stash save --include-untracked && + test_path_is_missing ignored.d/foo && + git stash pop && + test_path_is_file ignored.d/foo +' + +test_expect_success 'stash -u -- <untracked> doesnt print error' ' + >untracked && + git stash push -u -- untracked 2>actual && + test_path_is_missing untracked && + test_line_count = 0 actual +' + +test_expect_success 'stash -u -- <untracked> leaves rest of working tree in place' ' + >tracked && + git add tracked && + >untracked && + git stash push -u -- untracked && + test_path_is_missing untracked && + test_path_is_file tracked +' + +test_expect_success 'stash -u -- <tracked> <untracked> clears changes in both' ' + >tracked && + git add tracked && + >untracked && + git stash push -u -- tracked untracked && + test_path_is_missing tracked && + test_path_is_missing untracked +' + +test_expect_success 'stash --all -- <ignored> stashes ignored file' ' + >ignored.d/bar && + git stash push --all -- ignored.d/bar && + test_path_is_missing ignored.d/bar +' + +test_expect_success 'stash --all -- <tracked> <ignored> clears changes in both' ' + >tracked && + git add tracked && + >ignored.d/bar && + git stash push --all -- tracked ignored.d/bar && + test_path_is_missing tracked && + test_path_is_missing ignored.d/bar +' + +test_expect_success 'stash -u -- <ignored> leaves ignored file alone' ' + >ignored.d/bar && + git stash push -u -- ignored.d/bar && + test_path_is_file ignored.d/bar +' + +test_expect_success 'stash -u -- <non-existant> shows no changes when there are none' ' + git stash push -u -- non-existant >actual && + echo "No local changes to save" >expect && + test_i18ncmp expect actual +' + test_done diff --git a/t/t4001-diff-rename.sh b/t/t4001-diff-rename.sh index 0d1fa45d25..a07816d560 100755 --- a/t/t4001-diff-rename.sh +++ b/t/t4001-diff-rename.sh @@ -134,11 +134,15 @@ test_expect_success 'favour same basenames over different ones' ' git rm path1 && mkdir subdir && git mv another-path subdir/path1 && - git status | test_i18ngrep "renamed: .*path1 -> subdir/path1"' + git status >out && + test_i18ngrep "renamed: .*path1 -> subdir/path1" out +' test_expect_success 'favour same basenames even with minor differences' ' git show HEAD:path1 | sed "s/15/16/" > subdir/path1 && - git status | test_i18ngrep "renamed: .*path1 -> subdir/path1"' + git status >out && + test_i18ngrep "renamed: .*path1 -> subdir/path1" out +' test_expect_success 'two files with same basename and same content' ' git reset --hard && @@ -148,7 +152,8 @@ test_expect_success 'two files with same basename and same content' ' git add dir && git commit -m 2 && git mv dir other-dir && - git status | test_i18ngrep "renamed: .*dir/A/file -> other-dir/A/file" + git status >out && + test_i18ngrep "renamed: .*dir/A/file -> other-dir/A/file" out ' test_expect_success 'setup for many rename source candidates' ' @@ -230,4 +235,19 @@ test_expect_success 'rename pretty print common prefix and suffix overlap' ' test_i18ngrep " d/f/{ => f}/e " output ' +test_expect_success 'diff-tree -l0 defaults to a big rename limit, not zero' ' + test_write_lines line1 line2 line3 >myfile && + git add myfile && + git commit -m x && + + test_write_lines line1 line2 line4 >myotherfile && + git rm myfile && + git add myotherfile && + git commit -m x && + + git diff-tree -M -l0 HEAD HEAD^ >actual && + # Verify that a rename from myotherfile to myfile was detected + grep "myotherfile.*myfile" actual +' + test_done diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index 13e7f621ab..cf0f3a1ee7 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -73,7 +73,7 @@ test_expect_success 'diff identical, but newly created symlink and file' ' >expected && rm -f frotz nitfol && echo xyzzy >nitfol && - test-chmtime +10 nitfol && + test-tool chmtime +10 nitfol && if test_have_prereq SYMLINKS then ln -s xyzzy frotz diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index d09acfe48e..f8d853595b 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -76,7 +76,7 @@ test_expect_success setup ' mkdir dir3 && cp dir/sub dir3/sub && - test-chmtime +1 dir3/sub && + test-tool chmtime +1 dir3/sub && git config log.showroot false && git commit --amend && @@ -90,6 +90,14 @@ test_expect_success setup ' git commit -m "Rearranged lines in dir/sub" && git checkout master && + GIT_AUTHOR_DATE="2006-06-26 00:06:00 +0000" && + GIT_COMMITTER_DATE="2006-06-26 00:06:00 +0000" && + export GIT_AUTHOR_DATE GIT_COMMITTER_DATE && + git checkout -b mode initial && + git update-index --chmod=+x file0 && + git commit -m "update mode" && + git checkout -f master && + git config diff.renames false && git show-branch @@ -110,20 +118,37 @@ test_expect_success setup ' EOF V=$(git version | sed -e 's/^git version //' -e 's/\./\\./g') -while read cmd +while read magic cmd do - case "$cmd" in - '' | '#'*) continue ;; + case "$magic" in + '' | '#'*) + continue ;; + :*) + magic=${magic#:} + label="$magic-$cmd" + case "$magic" in + noellipses) ;; + *) + die "bug in t4103: unknown magic $magic" ;; + esac ;; + *) + cmd="$magic $cmd" magic= + label="$cmd" ;; esac - test=$(echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g') + test=$(echo "$label" | sed -e 's|[/ ][/ ]*|_|g') pfx=$(printf "%04d" $test_count) expect="$TEST_DIRECTORY/t4013/diff.$test" actual="$pfx-diff.$test" - test_expect_success "git $cmd" ' + test_expect_success "git $cmd # magic is ${magic:-"(not used)"}" ' { - echo "\$ git $cmd" - git $cmd | + echo "$ git $cmd" + case "$magic" in + "") + GIT_PRINT_SHA1_ELLIPSIS=yes git $cmd ;; + noellipses) + git $cmd ;; + esac | sed -e "s/^\\(-*\\)$V\\(-*\\)\$/\\1g-i-t--v-e-r-s-i-o-n\2/" \ -e "s/^\\(.*mixed; boundary=\"-*\\)$V\\(-*\\)\"\$/\\1g-i-t--v-e-r-s-i-o-n\2\"/" echo "\$" @@ -150,9 +175,12 @@ diff-tree -r --abbrev initial diff-tree -r --abbrev=4 initial diff-tree --root initial diff-tree --root --abbrev initial +:noellipses diff-tree --root --abbrev initial diff-tree --root -r initial diff-tree --root -r --abbrev initial +:noellipses diff-tree --root -r --abbrev initial diff-tree --root -r --abbrev=4 initial +:noellipses diff-tree --root -r --abbrev=4 initial diff-tree -p initial diff-tree --root -p initial diff-tree --patch-with-stat initial @@ -192,11 +220,16 @@ diff-tree --pretty side diff-tree --pretty -p side diff-tree --pretty --patch-with-stat side +diff-tree initial mode +diff-tree --stat initial mode +diff-tree --summary initial mode + diff-tree master diff-tree -p master diff-tree -p -m master diff-tree -c master diff-tree -c --abbrev master +:noellipses diff-tree -c --abbrev master diff-tree --cc master # stat only should show the diffstat with the first parent diff-tree -c --stat master @@ -243,8 +276,10 @@ rev-list --parents HEAD rev-list --children HEAD whatchanged master +:noellipses whatchanged master whatchanged -p master whatchanged --root master +:noellipses whatchanged --root master whatchanged --root -p master whatchanged --patch-with-stat master whatchanged --root --patch-with-stat master @@ -254,6 +289,7 @@ whatchanged --root -c --patch-with-stat --summary master # improved by Timo's patch whatchanged --root --cc --patch-with-stat --summary master whatchanged -SF master +:noellipses whatchanged -SF master whatchanged -SF -p master log --patch-with-stat master -- dir/ @@ -272,6 +308,7 @@ show --stat side show --stat --summary side show --patch-with-stat side show --patch-with-raw side +:noellipses show --patch-with-raw side show --patch-with-stat --summary side format-patch --stdout initial..side @@ -299,8 +336,10 @@ diff -r --stat initial..side diff initial..side diff --patch-with-stat initial..side diff --patch-with-raw initial..side +:noellipses diff --patch-with-raw initial..side diff --patch-with-stat -r initial..side diff --patch-with-raw -r initial..side +:noellipses diff --patch-with-raw -r initial..side diff --name-status dir2 dir diff --no-index --name-status dir2 dir diff --no-index --name-status -- dir2 dir @@ -313,11 +352,20 @@ diff --dirstat initial rearrange diff --dirstat-by-file initial rearrange # No-index --abbrev and --no-abbrev diff --raw initial +:noellipses diff --raw initial diff --raw --abbrev=4 initial +:noellipses diff --raw --abbrev=4 initial diff --raw --no-abbrev initial diff --no-index --raw dir2 dir +:noellipses diff --no-index --raw dir2 dir diff --no-index --raw --abbrev=4 dir2 dir +:noellipses diff --no-index --raw --abbrev=4 dir2 dir diff --no-index --raw --no-abbrev dir2 dir + +diff-tree --pretty --root --stat --compact-summary initial +diff-tree --pretty -R --root --stat --compact-summary initial +diff-tree --stat --compact-summary initial mode +diff-tree -R --stat --compact-summary initial mode EOF test_expect_success 'log -S requires an argument' ' diff --git a/t/t4013/diff.diff-tree_--pretty_--root_--stat_--compact-summary_initial b/t/t4013/diff.diff-tree_--pretty_--root_--stat_--compact-summary_initial new file mode 100644 index 0000000000..d6451ff7cc --- /dev/null +++ b/t/t4013/diff.diff-tree_--pretty_--root_--stat_--compact-summary_initial @@ -0,0 +1,12 @@ +$ git diff-tree --pretty --root --stat --compact-summary initial +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial + + dir/sub (new) | 2 ++ + file0 (new) | 3 +++ + file2 (new) | 3 +++ + 3 files changed, 8 insertions(+) +$ diff --git a/t/t4013/diff.diff-tree_--pretty_-R_--root_--stat_--compact-summary_initial b/t/t4013/diff.diff-tree_--pretty_-R_--root_--stat_--compact-summary_initial new file mode 100644 index 0000000000..1989e55cd0 --- /dev/null +++ b/t/t4013/diff.diff-tree_--pretty_-R_--root_--stat_--compact-summary_initial @@ -0,0 +1,12 @@ +$ git diff-tree --pretty -R --root --stat --compact-summary initial +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial + + dir/sub (gone) | 2 -- + file0 (gone) | 3 --- + file2 (gone) | 3 --- + 3 files changed, 8 deletions(-) +$ diff --git a/t/t4013/diff.diff-tree_--stat_--compact-summary_initial_mode b/t/t4013/diff.diff-tree_--stat_--compact-summary_initial_mode new file mode 100644 index 0000000000..9c7c8f63af --- /dev/null +++ b/t/t4013/diff.diff-tree_--stat_--compact-summary_initial_mode @@ -0,0 +1,4 @@ +$ git diff-tree --stat --compact-summary initial mode + file0 (mode +x) | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) +$ diff --git a/t/t4013/diff.diff-tree_--stat_initial_mode b/t/t4013/diff.diff-tree_--stat_initial_mode new file mode 100644 index 0000000000..0e5943c2c6 --- /dev/null +++ b/t/t4013/diff.diff-tree_--stat_initial_mode @@ -0,0 +1,4 @@ +$ git diff-tree --stat initial mode + file0 | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) +$ diff --git a/t/t4013/diff.diff-tree_--summary_initial_mode b/t/t4013/diff.diff-tree_--summary_initial_mode new file mode 100644 index 0000000000..25846b6af8 --- /dev/null +++ b/t/t4013/diff.diff-tree_--summary_initial_mode @@ -0,0 +1,3 @@ +$ git diff-tree --summary initial mode + mode change 100644 => 100755 file0 +$ diff --git a/t/t4013/diff.diff-tree_-R_--stat_--compact-summary_initial_mode b/t/t4013/diff.diff-tree_-R_--stat_--compact-summary_initial_mode new file mode 100644 index 0000000000..e38f3d3bfb --- /dev/null +++ b/t/t4013/diff.diff-tree_-R_--stat_--compact-summary_initial_mode @@ -0,0 +1,4 @@ +$ git diff-tree -R --stat --compact-summary initial mode + file0 (mode -x) | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) +$ diff --git a/t/t4013/diff.diff-tree_initial_mode b/t/t4013/diff.diff-tree_initial_mode new file mode 100644 index 0000000000..c47c09423e --- /dev/null +++ b/t/t4013/diff.diff-tree_initial_mode @@ -0,0 +1,3 @@ +$ git diff-tree initial mode +:100644 100755 01e79c32a8c99c557f0757da7cb6d65b3414466d 01e79c32a8c99c557f0757da7cb6d65b3414466d M file0 +$ diff --git a/t/t4013/diff.log_--decorate=full_--all b/t/t4013/diff.log_--decorate=full_--all index b345b2ebfa..2afe91f116 100644 --- a/t/t4013/diff.log_--decorate=full_--all +++ b/t/t4013/diff.log_--decorate=full_--all @@ -1,4 +1,10 @@ $ git log --decorate=full --all +commit b7e0bc69303b488b47deca799a7d723971dfa6cd (refs/heads/mode) +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + update mode + commit cd4e72fd96faed3f0ba949dc42967430374e2290 (refs/heads/rearrange) Author: A U Thor <author@example.com> Date: Mon Jun 26 00:06:00 2006 +0000 diff --git a/t/t4013/diff.log_--decorate_--all b/t/t4013/diff.log_--decorate_--all index 3aa16a9e42..d0f308ab2b 100644 --- a/t/t4013/diff.log_--decorate_--all +++ b/t/t4013/diff.log_--decorate_--all @@ -1,4 +1,10 @@ $ git log --decorate --all +commit b7e0bc69303b488b47deca799a7d723971dfa6cd (mode) +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + update mode + commit cd4e72fd96faed3f0ba949dc42967430374e2290 (rearrange) Author: A U Thor <author@example.com> Date: Mon Jun 26 00:06:00 2006 +0000 diff --git a/t/t4013/diff.noellipses-diff-tree_--root_--abbrev_initial b/t/t4013/diff.noellipses-diff-tree_--root_--abbrev_initial new file mode 100644 index 0000000000..4bdad4072e --- /dev/null +++ b/t/t4013/diff.noellipses-diff-tree_--root_--abbrev_initial @@ -0,0 +1,6 @@ +$ git diff-tree --root --abbrev initial +444ac553ac7612cc88969031b02b3767fb8a353a +:000000 040000 0000000 da7a33f A dir +:000000 100644 0000000 01e79c3 A file0 +:000000 100644 0000000 01e79c3 A file2 +$ diff --git a/t/t4013/diff.noellipses-diff-tree_--root_-r_--abbrev=4_initial b/t/t4013/diff.noellipses-diff-tree_--root_-r_--abbrev=4_initial new file mode 100644 index 0000000000..26fbfeb177 --- /dev/null +++ b/t/t4013/diff.noellipses-diff-tree_--root_-r_--abbrev=4_initial @@ -0,0 +1,6 @@ +$ git diff-tree --root -r --abbrev=4 initial +444ac553ac7612cc88969031b02b3767fb8a353a +:000000 100644 0000 35d2 A dir/sub +:000000 100644 0000 01e7 A file0 +:000000 100644 0000 01e7 A file2 +$ diff --git a/t/t4013/diff.noellipses-diff-tree_--root_-r_--abbrev_initial b/t/t4013/diff.noellipses-diff-tree_--root_-r_--abbrev_initial new file mode 100644 index 0000000000..2ac8561191 --- /dev/null +++ b/t/t4013/diff.noellipses-diff-tree_--root_-r_--abbrev_initial @@ -0,0 +1,6 @@ +$ git diff-tree --root -r --abbrev initial +444ac553ac7612cc88969031b02b3767fb8a353a +:000000 100644 0000000 35d242b A dir/sub +:000000 100644 0000000 01e79c3 A file0 +:000000 100644 0000000 01e79c3 A file2 +$ diff --git a/t/t4013/diff.noellipses-diff-tree_-c_--abbrev_master b/t/t4013/diff.noellipses-diff-tree_-c_--abbrev_master new file mode 100644 index 0000000000..bb80f013b3 --- /dev/null +++ b/t/t4013/diff.noellipses-diff-tree_-c_--abbrev_master @@ -0,0 +1,5 @@ +$ git diff-tree -c --abbrev master +59d314ad6f356dd08601a4cd5e530381da3e3c64 +::100644 100644 100644 cead32e 7289e35 992913c MM dir/sub +::100644 100644 100644 b414108 f4615da 10a8a9f MM file0 +$ diff --git a/t/t4013/diff.noellipses-diff_--no-index_--raw_--abbrev=4_dir2_dir b/t/t4013/diff.noellipses-diff_--no-index_--raw_--abbrev=4_dir2_dir new file mode 100644 index 0000000000..41b7baf0a5 --- /dev/null +++ b/t/t4013/diff.noellipses-diff_--no-index_--raw_--abbrev=4_dir2_dir @@ -0,0 +1,3 @@ +$ git diff --no-index --raw --abbrev=4 dir2 dir +:000000 100644 0000 0000 A dir/sub +$ diff --git a/t/t4013/diff.noellipses-diff_--no-index_--raw_dir2_dir b/t/t4013/diff.noellipses-diff_--no-index_--raw_dir2_dir new file mode 100644 index 0000000000..0cf3a3efea --- /dev/null +++ b/t/t4013/diff.noellipses-diff_--no-index_--raw_dir2_dir @@ -0,0 +1,3 @@ +$ git diff --no-index --raw dir2 dir +:000000 100644 0000000 0000000 A dir/sub +$ diff --git a/t/t4013/diff.noellipses-diff_--patch-with-raw_-r_initial..side b/t/t4013/diff.noellipses-diff_--patch-with-raw_-r_initial..side new file mode 100644 index 0000000000..8d1f1e3721 --- /dev/null +++ b/t/t4013/diff.noellipses-diff_--patch-with-raw_-r_initial..side @@ -0,0 +1,36 @@ +$ git diff --patch-with-raw -r initial..side +:100644 100644 35d242b 7289e35 M dir/sub +:100644 100644 01e79c3 f4615da M file0 +:000000 100644 0000000 7289e35 A file3 + +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 +$ diff --git a/t/t4013/diff.noellipses-diff_--patch-with-raw_initial..side b/t/t4013/diff.noellipses-diff_--patch-with-raw_initial..side new file mode 100644 index 0000000000..50d8aee4f7 --- /dev/null +++ b/t/t4013/diff.noellipses-diff_--patch-with-raw_initial..side @@ -0,0 +1,36 @@ +$ git diff --patch-with-raw initial..side +:100644 100644 35d242b 7289e35 M dir/sub +:100644 100644 01e79c3 f4615da M file0 +:000000 100644 0000000 7289e35 A file3 + +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 +$ diff --git a/t/t4013/diff.noellipses-diff_--raw_--abbrev=4_initial b/t/t4013/diff.noellipses-diff_--raw_--abbrev=4_initial new file mode 100644 index 0000000000..8ae44d6c83 --- /dev/null +++ b/t/t4013/diff.noellipses-diff_--raw_--abbrev=4_initial @@ -0,0 +1,6 @@ +$ git diff --raw --abbrev=4 initial +:100644 100644 35d2 9929 M dir/sub +:100644 100644 01e7 10a8 M file0 +:000000 100644 0000 b1e6 A file1 +:100644 000000 01e7 0000 D file2 +$ diff --git a/t/t4013/diff.noellipses-diff_--raw_initial b/t/t4013/diff.noellipses-diff_--raw_initial new file mode 100644 index 0000000000..0175bfb281 --- /dev/null +++ b/t/t4013/diff.noellipses-diff_--raw_initial @@ -0,0 +1,6 @@ +$ git diff --raw initial +:100644 100644 35d242b 992913c M dir/sub +:100644 100644 01e79c3 10a8a9f M file0 +:000000 100644 0000000 b1e6722 A file1 +:100644 000000 01e79c3 0000000 D file2 +$ diff --git a/t/t4013/diff.noellipses-show_--patch-with-raw_side b/t/t4013/diff.noellipses-show_--patch-with-raw_side new file mode 100644 index 0000000000..32fed3d576 --- /dev/null +++ b/t/t4013/diff.noellipses-show_--patch-with-raw_side @@ -0,0 +1,42 @@ +$ git show --patch-with-raw side +commit c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:03:00 2006 +0000 + + Side + +:100644 100644 35d242b 7289e35 M dir/sub +:100644 100644 01e79c3 f4615da M file0 +:000000 100644 0000000 7289e35 A file3 + +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 +$ diff --git a/t/t4013/diff.noellipses-whatchanged_--root_master b/t/t4013/diff.noellipses-whatchanged_--root_master new file mode 100644 index 0000000000..c2cfd4e729 --- /dev/null +++ b/t/t4013/diff.noellipses-whatchanged_--root_master @@ -0,0 +1,42 @@ +$ git whatchanged --root master +commit c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:03:00 2006 +0000 + + Side + +:100644 100644 35d242b 7289e35 M dir/sub +:100644 100644 01e79c3 f4615da M file0 +:000000 100644 0000000 7289e35 A file3 + +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third + +:100644 100644 8422d40 cead32e M dir/sub +:000000 100644 0000000 b1e6722 A file1 + +commit 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:01:00 2006 +0000 + + Second + + This is the second commit. + +:100644 100644 35d242b 8422d40 M dir/sub +:100644 100644 01e79c3 b414108 M file0 +:100644 000000 01e79c3 0000000 D file2 + +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial + +:000000 100644 0000000 35d242b A dir/sub +:000000 100644 0000000 01e79c3 A file0 +:000000 100644 0000000 01e79c3 A file2 +$ diff --git a/t/t4013/diff.noellipses-whatchanged_-SF_master b/t/t4013/diff.noellipses-whatchanged_-SF_master new file mode 100644 index 0000000000..b36ce5886e --- /dev/null +++ b/t/t4013/diff.noellipses-whatchanged_-SF_master @@ -0,0 +1,9 @@ +$ git whatchanged -SF master +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third + +:100644 100644 8422d40 cead32e M dir/sub +$ diff --git a/t/t4013/diff.noellipses-whatchanged_master b/t/t4013/diff.noellipses-whatchanged_master new file mode 100644 index 0000000000..55e500f2ed --- /dev/null +++ b/t/t4013/diff.noellipses-whatchanged_master @@ -0,0 +1,32 @@ +$ git whatchanged master +commit c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:03:00 2006 +0000 + + Side + +:100644 100644 35d242b 7289e35 M dir/sub +:100644 100644 01e79c3 f4615da M file0 +:000000 100644 0000000 7289e35 A file3 + +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third + +:100644 100644 8422d40 cead32e M dir/sub +:000000 100644 0000000 b1e6722 A file1 + +commit 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:01:00 2006 +0000 + + Second + + This is the second commit. + +:100644 100644 35d242b 8422d40 M dir/sub +:100644 100644 01e79c3 b414108 M file0 +:100644 000000 01e79c3 0000000 D file2 +$ diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index 94597ff284..17df491a3a 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -106,6 +106,8 @@ test_expect_success 'another test, without options' ' git diff -w -b --ignore-space-at-eol >out && test_cmp expect out && + git diff -w --ignore-cr-at-eol >out && + test_cmp expect out && tr "Q_" "\015 " <<-\EOF >expect && diff --git a/x b/x @@ -128,6 +130,9 @@ test_expect_success 'another test, without options' ' git diff -b --ignore-space-at-eol >out && test_cmp expect out && + git diff -b --ignore-cr-at-eol >out && + test_cmp expect out && + tr "Q_" "\015 " <<-\EOF >expect && diff --git a/x b/x index d99af23..22d9f73 100644 @@ -145,6 +150,29 @@ test_expect_success 'another test, without options' ' CR at end EOF git diff --ignore-space-at-eol >out && + test_cmp expect out && + + git diff --ignore-space-at-eol --ignore-cr-at-eol >out && + test_cmp expect out && + + tr "Q_" "\015 " <<-\EOF >expect && + diff --git a/x b/x + index_d99af23..22d9f73 100644 + --- a/x + +++ b/x + @@ -1,6 +1,6 @@ + -whitespace at beginning + -whitespace change + -whitespace in the middle + -whitespace at end + +_ whitespace at beginning + +whitespace_ _change + +white space in the middle + +whitespace at end__ + unchanged line + CR at end + EOF + git diff --ignore-cr-at-eol >out && test_cmp expect out ' @@ -155,7 +183,7 @@ test_expect_success 'ignore-blank-lines: only new lines' ' " >x && git diff --ignore-blank-lines >out && >expect && - test_cmp out expect + test_cmp expect out ' test_expect_success 'ignore-blank-lines: only new lines with space' ' @@ -165,7 +193,7 @@ test_expect_success 'ignore-blank-lines: only new lines with space' ' " >x && git diff -w --ignore-blank-lines >out && >expect && - test_cmp out expect + test_cmp expect out ' test_expect_success 'ignore-blank-lines: after change' ' @@ -608,6 +636,23 @@ test_expect_success 'check with space before tab in indent (diff-tree)' ' test_must_fail git diff-tree --check HEAD^ HEAD ' +test_expect_success 'check with ignored trailing whitespace attr (diff-tree)' ' + test_when_finished "git reset --hard HEAD^" && + + # create a whitespace error that should be ignored + echo "* -whitespace" >.gitattributes && + git add .gitattributes && + echo "foo(); " >x && + git add x && + git commit -m "add trailing space" && + + # with a worktree diff-tree ignores the whitespace error + git diff-tree --root --check HEAD && + + # without a worktree diff-tree still ignores the whitespace error + git -C .git diff-tree --root --check HEAD +' + test_expect_success 'check trailing whitespace (trailing-space: off)' ' git config core.whitespace "-trailing-space" && echo "foo (); " >x && @@ -802,7 +847,6 @@ test_expect_success 'combined diff with autocrlf conversion' ' # Start testing the colored format for whitespace checks test_expect_success 'setup diff colors' ' - git config color.diff always && git config color.diff.plain normal && git config color.diff.meta bold && git config color.diff.frag cyan && @@ -972,4 +1016,713 @@ test_expect_success 'option overrides diff.wsErrorHighlight' ' ' +test_expect_success 'detect moved code, complete file' ' + git reset --hard && + cat <<-\EOF >test.c && + #include<stdio.h> + main() + { + printf("Hello World"); + } + EOF + git add test.c && + git commit -m "add main function" && + git mv test.c main.c && + test_config color.diff.oldMoved "normal red" && + test_config color.diff.newMoved "normal green" && + git diff HEAD --color-moved=zebra --color --no-renames | test_decode_color >actual && + cat >expected <<-\EOF && + <BOLD>diff --git a/main.c b/main.c<RESET> + <BOLD>new file mode 100644<RESET> + <BOLD>index 0000000..a986c57<RESET> + <BOLD>--- /dev/null<RESET> + <BOLD>+++ b/main.c<RESET> + <CYAN>@@ -0,0 +1,5 @@<RESET> + <BGREEN>+<RESET><BGREEN>#include<stdio.h><RESET> + <BGREEN>+<RESET><BGREEN>main()<RESET> + <BGREEN>+<RESET><BGREEN>{<RESET> + <BGREEN>+<RESET><BGREEN>printf("Hello World");<RESET> + <BGREEN>+<RESET><BGREEN>}<RESET> + <BOLD>diff --git a/test.c b/test.c<RESET> + <BOLD>deleted file mode 100644<RESET> + <BOLD>index a986c57..0000000<RESET> + <BOLD>--- a/test.c<RESET> + <BOLD>+++ /dev/null<RESET> + <CYAN>@@ -1,5 +0,0 @@<RESET> + <BRED>-#include<stdio.h><RESET> + <BRED>-main()<RESET> + <BRED>-{<RESET> + <BRED>-printf("Hello World");<RESET> + <BRED>-}<RESET> + EOF + + test_cmp expected actual +' + +test_expect_success 'detect malicious moved code, inside file' ' + test_config color.diff.oldMoved "normal red" && + test_config color.diff.newMoved "normal green" && + test_config color.diff.oldMovedAlternative "blue" && + test_config color.diff.newMovedAlternative "yellow" && + git reset --hard && + cat <<-\EOF >main.c && + #include<stdio.h> + int stuff() + { + printf("Hello "); + printf("World\n"); + } + + int secure_foo(struct user *u) + { + if (!u->is_allowed_foo) + return; + foo(u); + } + + int main() + { + foo(); + } + EOF + cat <<-\EOF >test.c && + #include<stdio.h> + int bar() + { + printf("Hello World, but different\n"); + } + + int another_function() + { + bar(); + } + EOF + git add main.c test.c && + git commit -m "add main and test file" && + cat <<-\EOF >main.c && + #include<stdio.h> + int stuff() + { + printf("Hello "); + printf("World\n"); + } + + int main() + { + foo(); + } + EOF + cat <<-\EOF >test.c && + #include<stdio.h> + int bar() + { + printf("Hello World, but different\n"); + } + + int secure_foo(struct user *u) + { + foo(u); + if (!u->is_allowed_foo) + return; + } + + int another_function() + { + bar(); + } + EOF + git diff HEAD --no-renames --color-moved=zebra --color | test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/main.c b/main.c<RESET> + <BOLD>index 27a619c..7cf9336 100644<RESET> + <BOLD>--- a/main.c<RESET> + <BOLD>+++ b/main.c<RESET> + <CYAN>@@ -5,13 +5,6 @@<RESET> <RESET>printf("Hello ");<RESET> + printf("World\n");<RESET> + }<RESET> + <RESET> + <BRED>-int secure_foo(struct user *u)<RESET> + <BRED>-{<RESET> + <BLUE>-if (!u->is_allowed_foo)<RESET> + <BLUE>-return;<RESET> + <RED>-foo(u);<RESET> + <RED>-}<RESET> + <RED>-<RESET> + int main()<RESET> + {<RESET> + foo();<RESET> + <BOLD>diff --git a/test.c b/test.c<RESET> + <BOLD>index 1dc1d85..2bedec9 100644<RESET> + <BOLD>--- a/test.c<RESET> + <BOLD>+++ b/test.c<RESET> + <CYAN>@@ -4,6 +4,13 @@<RESET> <RESET>int bar()<RESET> + printf("Hello World, but different\n");<RESET> + }<RESET> + <RESET> + <BGREEN>+<RESET><BGREEN>int secure_foo(struct user *u)<RESET> + <BGREEN>+<RESET><BGREEN>{<RESET> + <GREEN>+<RESET><GREEN>foo(u);<RESET> + <BGREEN>+<RESET><BGREEN>if (!u->is_allowed_foo)<RESET> + <BGREEN>+<RESET><BGREEN>return;<RESET> + <GREEN>+<RESET><GREEN>}<RESET> + <GREEN>+<RESET> + int another_function()<RESET> + {<RESET> + bar();<RESET> + EOF + + test_cmp expected actual +' + +test_expect_success 'plain moved code, inside file' ' + test_config color.diff.oldMoved "normal red" && + test_config color.diff.newMoved "normal green" && + test_config color.diff.oldMovedAlternative "blue" && + test_config color.diff.newMovedAlternative "yellow" && + # needs previous test as setup + git diff HEAD --no-renames --color-moved=plain --color | test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/main.c b/main.c<RESET> + <BOLD>index 27a619c..7cf9336 100644<RESET> + <BOLD>--- a/main.c<RESET> + <BOLD>+++ b/main.c<RESET> + <CYAN>@@ -5,13 +5,6 @@<RESET> <RESET>printf("Hello ");<RESET> + printf("World\n");<RESET> + }<RESET> + <RESET> + <BRED>-int secure_foo(struct user *u)<RESET> + <BRED>-{<RESET> + <BRED>-if (!u->is_allowed_foo)<RESET> + <BRED>-return;<RESET> + <BRED>-foo(u);<RESET> + <BRED>-}<RESET> + <BRED>-<RESET> + int main()<RESET> + {<RESET> + foo();<RESET> + <BOLD>diff --git a/test.c b/test.c<RESET> + <BOLD>index 1dc1d85..2bedec9 100644<RESET> + <BOLD>--- a/test.c<RESET> + <BOLD>+++ b/test.c<RESET> + <CYAN>@@ -4,6 +4,13 @@<RESET> <RESET>int bar()<RESET> + printf("Hello World, but different\n");<RESET> + }<RESET> + <RESET> + <BGREEN>+<RESET><BGREEN>int secure_foo(struct user *u)<RESET> + <BGREEN>+<RESET><BGREEN>{<RESET> + <BGREEN>+<RESET><BGREEN>foo(u);<RESET> + <BGREEN>+<RESET><BGREEN>if (!u->is_allowed_foo)<RESET> + <BGREEN>+<RESET><BGREEN>return;<RESET> + <BGREEN>+<RESET><BGREEN>}<RESET> + <BGREEN>+<RESET> + int another_function()<RESET> + {<RESET> + bar();<RESET> + EOF + + test_cmp expected actual +' + +test_expect_success 'detect permutations inside moved code -- dimmed_zebra' ' + git reset --hard && + cat <<-\EOF >lines.txt && + long line 1 + long line 2 + long line 3 + line 4 + line 5 + line 6 + line 7 + line 8 + line 9 + line 10 + line 11 + line 12 + line 13 + long line 14 + long line 15 + long line 16 + EOF + git add lines.txt && + git commit -m "add poetry" && + cat <<-\EOF >lines.txt && + line 4 + line 5 + line 6 + line 7 + line 8 + line 9 + long line 1 + long line 2 + long line 3 + long line 14 + long line 15 + long line 16 + line 10 + line 11 + line 12 + line 13 + EOF + test_config color.diff.oldMoved "magenta" && + test_config color.diff.newMoved "cyan" && + test_config color.diff.oldMovedAlternative "blue" && + test_config color.diff.newMovedAlternative "yellow" && + test_config color.diff.oldMovedDimmed "normal magenta" && + test_config color.diff.newMovedDimmed "normal cyan" && + test_config color.diff.oldMovedAlternativeDimmed "normal blue" && + test_config color.diff.newMovedAlternativeDimmed "normal yellow" && + git diff HEAD --no-renames --color-moved=dimmed_zebra --color | + grep -v "index" | + test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/lines.txt b/lines.txt<RESET> + <BOLD>--- a/lines.txt<RESET> + <BOLD>+++ b/lines.txt<RESET> + <CYAN>@@ -1,16 +1,16 @@<RESET> + <BMAGENTA>-long line 1<RESET> + <BMAGENTA>-long line 2<RESET> + <BMAGENTA>-long line 3<RESET> + line 4<RESET> + line 5<RESET> + line 6<RESET> + line 7<RESET> + line 8<RESET> + line 9<RESET> + <BCYAN>+<RESET><BCYAN>long line 1<RESET> + <BCYAN>+<RESET><BCYAN>long line 2<RESET> + <CYAN>+<RESET><CYAN>long line 3<RESET> + <YELLOW>+<RESET><YELLOW>long line 14<RESET> + <BYELLOW>+<RESET><BYELLOW>long line 15<RESET> + <BYELLOW>+<RESET><BYELLOW>long line 16<RESET> + line 10<RESET> + line 11<RESET> + line 12<RESET> + line 13<RESET> + <BMAGENTA>-long line 14<RESET> + <BMAGENTA>-long line 15<RESET> + <BMAGENTA>-long line 16<RESET> + EOF + test_cmp expected actual +' + +test_expect_success 'cmd option assumes configured colored-moved' ' + test_config color.diff.oldMoved "magenta" && + test_config color.diff.newMoved "cyan" && + test_config color.diff.oldMovedAlternative "blue" && + test_config color.diff.newMovedAlternative "yellow" && + test_config color.diff.oldMovedDimmed "normal magenta" && + test_config color.diff.newMovedDimmed "normal cyan" && + test_config color.diff.oldMovedAlternativeDimmed "normal blue" && + test_config color.diff.newMovedAlternativeDimmed "normal yellow" && + test_config diff.colorMoved zebra && + git diff HEAD --no-renames --color-moved --color | + grep -v "index" | + test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/lines.txt b/lines.txt<RESET> + <BOLD>--- a/lines.txt<RESET> + <BOLD>+++ b/lines.txt<RESET> + <CYAN>@@ -1,16 +1,16 @@<RESET> + <MAGENTA>-long line 1<RESET> + <MAGENTA>-long line 2<RESET> + <MAGENTA>-long line 3<RESET> + line 4<RESET> + line 5<RESET> + line 6<RESET> + line 7<RESET> + line 8<RESET> + line 9<RESET> + <CYAN>+<RESET><CYAN>long line 1<RESET> + <CYAN>+<RESET><CYAN>long line 2<RESET> + <CYAN>+<RESET><CYAN>long line 3<RESET> + <YELLOW>+<RESET><YELLOW>long line 14<RESET> + <YELLOW>+<RESET><YELLOW>long line 15<RESET> + <YELLOW>+<RESET><YELLOW>long line 16<RESET> + line 10<RESET> + line 11<RESET> + line 12<RESET> + line 13<RESET> + <MAGENTA>-long line 14<RESET> + <MAGENTA>-long line 15<RESET> + <MAGENTA>-long line 16<RESET> + EOF + test_cmp expected actual +' + +test_expect_success 'no effect from --color-moved with --word-diff' ' + cat <<-\EOF >text.txt && + Lorem Ipsum is simply dummy text of the printing and typesetting industry. + EOF + git add text.txt && + git commit -a -m "clean state" && + cat <<-\EOF >text.txt && + simply Lorem Ipsum dummy is text of the typesetting and printing industry. + EOF + git diff --color-moved --word-diff >actual && + git diff --word-diff >expect && + test_cmp expect actual +' + +test_expect_success 'set up whitespace tests' ' + git reset --hard && + # Note that these lines have no leading or trailing whitespace. + cat <<-\EOF >lines.txt && + line 1 + line 2 + line 3 + line 4 + line 5 + long line 6 + long line 7 + long line 8 + long line 9 + EOF + git add lines.txt && + git commit -m "add poetry" && + git config color.diff.oldMoved "magenta" && + git config color.diff.newMoved "cyan" +' + +test_expect_success 'move detection ignoring whitespace ' ' + q_to_tab <<-\EOF >lines.txt && + Qlong line 6 + Qlong line 7 + Qlong line 8 + Qchanged long line 9 + line 1 + line 2 + line 3 + line 4 + line 5 + EOF + git diff HEAD --no-renames --color-moved --color | + grep -v "index" | + test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/lines.txt b/lines.txt<RESET> + <BOLD>--- a/lines.txt<RESET> + <BOLD>+++ b/lines.txt<RESET> + <CYAN>@@ -1,9 +1,9 @@<RESET> + <GREEN>+<RESET> <GREEN>long line 6<RESET> + <GREEN>+<RESET> <GREEN>long line 7<RESET> + <GREEN>+<RESET> <GREEN>long line 8<RESET> + <GREEN>+<RESET> <GREEN>changed long line 9<RESET> + line 1<RESET> + line 2<RESET> + line 3<RESET> + line 4<RESET> + line 5<RESET> + <RED>-long line 6<RESET> + <RED>-long line 7<RESET> + <RED>-long line 8<RESET> + <RED>-long line 9<RESET> + EOF + test_cmp expected actual && + + git diff HEAD --no-renames -w --color-moved --color | + grep -v "index" | + test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/lines.txt b/lines.txt<RESET> + <BOLD>--- a/lines.txt<RESET> + <BOLD>+++ b/lines.txt<RESET> + <CYAN>@@ -1,9 +1,9 @@<RESET> + <CYAN>+<RESET> <CYAN>long line 6<RESET> + <CYAN>+<RESET> <CYAN>long line 7<RESET> + <CYAN>+<RESET> <CYAN>long line 8<RESET> + <GREEN>+<RESET> <GREEN>changed long line 9<RESET> + line 1<RESET> + line 2<RESET> + line 3<RESET> + line 4<RESET> + line 5<RESET> + <MAGENTA>-long line 6<RESET> + <MAGENTA>-long line 7<RESET> + <MAGENTA>-long line 8<RESET> + <RED>-long line 9<RESET> + EOF + test_cmp expected actual +' + +test_expect_success 'move detection ignoring whitespace changes' ' + git reset --hard && + # Lines 6-8 have a space change, but 9 is new whitespace + q_to_tab <<-\EOF >lines.txt && + longQline 6 + longQline 7 + longQline 8 + long liQne 9 + line 1 + line 2 + line 3 + line 4 + line 5 + EOF + + git diff HEAD --no-renames --color-moved --color | + grep -v "index" | + test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/lines.txt b/lines.txt<RESET> + <BOLD>--- a/lines.txt<RESET> + <BOLD>+++ b/lines.txt<RESET> + <CYAN>@@ -1,9 +1,9 @@<RESET> + <GREEN>+<RESET><GREEN>long line 6<RESET> + <GREEN>+<RESET><GREEN>long line 7<RESET> + <GREEN>+<RESET><GREEN>long line 8<RESET> + <GREEN>+<RESET><GREEN>long li ne 9<RESET> + line 1<RESET> + line 2<RESET> + line 3<RESET> + line 4<RESET> + line 5<RESET> + <RED>-long line 6<RESET> + <RED>-long line 7<RESET> + <RED>-long line 8<RESET> + <RED>-long line 9<RESET> + EOF + test_cmp expected actual && + + git diff HEAD --no-renames -b --color-moved --color | + grep -v "index" | + test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/lines.txt b/lines.txt<RESET> + <BOLD>--- a/lines.txt<RESET> + <BOLD>+++ b/lines.txt<RESET> + <CYAN>@@ -1,9 +1,9 @@<RESET> + <CYAN>+<RESET><CYAN>long line 6<RESET> + <CYAN>+<RESET><CYAN>long line 7<RESET> + <CYAN>+<RESET><CYAN>long line 8<RESET> + <GREEN>+<RESET><GREEN>long li ne 9<RESET> + line 1<RESET> + line 2<RESET> + line 3<RESET> + line 4<RESET> + line 5<RESET> + <MAGENTA>-long line 6<RESET> + <MAGENTA>-long line 7<RESET> + <MAGENTA>-long line 8<RESET> + <RED>-long line 9<RESET> + EOF + test_cmp expected actual +' + +test_expect_success 'move detection ignoring whitespace at eol' ' + git reset --hard && + # Lines 6-9 have new eol whitespace, but 9 also has it in the middle + q_to_tab <<-\EOF >lines.txt && + long line 6Q + long line 7Q + long line 8Q + longQline 9Q + line 1 + line 2 + line 3 + line 4 + line 5 + EOF + + # avoid cluttering the output with complaints about our eol whitespace + test_config core.whitespace -blank-at-eol && + + git diff HEAD --no-renames --color-moved --color | + grep -v "index" | + test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/lines.txt b/lines.txt<RESET> + <BOLD>--- a/lines.txt<RESET> + <BOLD>+++ b/lines.txt<RESET> + <CYAN>@@ -1,9 +1,9 @@<RESET> + <GREEN>+<RESET><GREEN>long line 6 <RESET> + <GREEN>+<RESET><GREEN>long line 7 <RESET> + <GREEN>+<RESET><GREEN>long line 8 <RESET> + <GREEN>+<RESET><GREEN>long line 9 <RESET> + line 1<RESET> + line 2<RESET> + line 3<RESET> + line 4<RESET> + line 5<RESET> + <RED>-long line 6<RESET> + <RED>-long line 7<RESET> + <RED>-long line 8<RESET> + <RED>-long line 9<RESET> + EOF + test_cmp expected actual && + + git diff HEAD --no-renames --ignore-space-at-eol --color-moved --color | + grep -v "index" | + test_decode_color >actual && + cat <<-\EOF >expected && + <BOLD>diff --git a/lines.txt b/lines.txt<RESET> + <BOLD>--- a/lines.txt<RESET> + <BOLD>+++ b/lines.txt<RESET> + <CYAN>@@ -1,9 +1,9 @@<RESET> + <CYAN>+<RESET><CYAN>long line 6 <RESET> + <CYAN>+<RESET><CYAN>long line 7 <RESET> + <CYAN>+<RESET><CYAN>long line 8 <RESET> + <GREEN>+<RESET><GREEN>long line 9 <RESET> + line 1<RESET> + line 2<RESET> + line 3<RESET> + line 4<RESET> + line 5<RESET> + <MAGENTA>-long line 6<RESET> + <MAGENTA>-long line 7<RESET> + <MAGENTA>-long line 8<RESET> + <RED>-long line 9<RESET> + EOF + test_cmp expected actual +' + +test_expect_success 'clean up whitespace-test colors' ' + git config --unset color.diff.oldMoved && + git config --unset color.diff.newMoved +' + +test_expect_success '--color-moved block at end of diff output respects MIN_ALNUM_COUNT' ' + git reset --hard && + >bar && + cat <<-\EOF >foo && + irrelevant_line + line1 + EOF + git add foo bar && + git commit -m x && + + cat <<-\EOF >bar && + line1 + EOF + cat <<-\EOF >foo && + irrelevant_line + EOF + + git diff HEAD --color-moved=zebra --color --no-renames | + grep -v "index" | + test_decode_color >actual && + cat >expected <<-\EOF && + <BOLD>diff --git a/bar b/bar<RESET> + <BOLD>--- a/bar<RESET> + <BOLD>+++ b/bar<RESET> + <CYAN>@@ -0,0 +1 @@<RESET> + <GREEN>+<RESET><GREEN>line1<RESET> + <BOLD>diff --git a/foo b/foo<RESET> + <BOLD>--- a/foo<RESET> + <BOLD>+++ b/foo<RESET> + <CYAN>@@ -1,2 +1 @@<RESET> + irrelevant_line<RESET> + <RED>-line1<RESET> + EOF + + test_cmp expected actual +' + +test_expect_success '--color-moved respects MIN_ALNUM_COUNT' ' + git reset --hard && + cat <<-\EOF >foo && + nineteen chars 456789 + irrelevant_line + twenty chars 234567890 + EOF + >bar && + git add foo bar && + git commit -m x && + + cat <<-\EOF >foo && + irrelevant_line + EOF + cat <<-\EOF >bar && + twenty chars 234567890 + nineteen chars 456789 + EOF + + git diff HEAD --color-moved=zebra --color --no-renames | + grep -v "index" | + test_decode_color >actual && + cat >expected <<-\EOF && + <BOLD>diff --git a/bar b/bar<RESET> + <BOLD>--- a/bar<RESET> + <BOLD>+++ b/bar<RESET> + <CYAN>@@ -0,0 +1,2 @@<RESET> + <BOLD;CYAN>+<RESET><BOLD;CYAN>twenty chars 234567890<RESET> + <GREEN>+<RESET><GREEN>nineteen chars 456789<RESET> + <BOLD>diff --git a/foo b/foo<RESET> + <BOLD>--- a/foo<RESET> + <BOLD>+++ b/foo<RESET> + <CYAN>@@ -1,3 +1 @@<RESET> + <RED>-nineteen chars 456789<RESET> + irrelevant_line<RESET> + <BOLD;MAGENTA>-twenty chars 234567890<RESET> + EOF + + test_cmp expected actual +' + +test_expect_success '--color-moved treats adjacent blocks as separate for MIN_ALNUM_COUNT' ' + git reset --hard && + cat <<-\EOF >foo && + 7charsA + irrelevant_line + 7charsB + 7charsC + EOF + >bar && + git add foo bar && + git commit -m x && + + cat <<-\EOF >foo && + irrelevant_line + EOF + cat <<-\EOF >bar && + 7charsB + 7charsC + 7charsA + EOF + + git diff HEAD --color-moved=zebra --color --no-renames | grep -v "index" | test_decode_color >actual && + cat >expected <<-\EOF && + <BOLD>diff --git a/bar b/bar<RESET> + <BOLD>--- a/bar<RESET> + <BOLD>+++ b/bar<RESET> + <CYAN>@@ -0,0 +1,3 @@<RESET> + <GREEN>+<RESET><GREEN>7charsB<RESET> + <GREEN>+<RESET><GREEN>7charsC<RESET> + <GREEN>+<RESET><GREEN>7charsA<RESET> + <BOLD>diff --git a/foo b/foo<RESET> + <BOLD>--- a/foo<RESET> + <BOLD>+++ b/foo<RESET> + <CYAN>@@ -1,4 +1 @@<RESET> + <RED>-7charsA<RESET> + irrelevant_line<RESET> + <RED>-7charsB<RESET> + <RED>-7charsC<RESET> + EOF + + test_cmp expected actual +' + +test_expect_success 'move detection with submodules' ' + test_create_repo bananas && + echo ripe >bananas/recipe && + git -C bananas add recipe && + test_commit fruit && + test_commit -C bananas recipe && + git submodule add ./bananas && + git add bananas && + git commit -a -m "bananas are like a heavy library?" && + echo foul >bananas/recipe && + echo ripe >fruit.t && + + git diff --submodule=diff --color-moved --color >actual && + + # no move detection as the moved line is across repository boundaries. + test_decode_color <actual >decoded_actual && + ! grep BGREEN decoded_actual && + ! grep BRED decoded_actual && + + # nor did we mess with it another way + git diff --submodule=diff --color | test_decode_color >expect && + test_cmp expect decoded_actual +' + test_done diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index 1795ffc3aa..22f9f88f0a 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -33,6 +33,7 @@ diffpatterns=" css fortran fountain + golang html java matlab diff --git a/t/t4018/golang-complex-function b/t/t4018/golang-complex-function new file mode 100644 index 0000000000..e057dcefed --- /dev/null +++ b/t/t4018/golang-complex-function @@ -0,0 +1,8 @@ +type Test struct { + a Type +} + +func (t *Test) RIGHT(a Type) (Type, error) { + t.a = a + return ChangeMe, nil +} diff --git a/t/t4018/golang-func b/t/t4018/golang-func new file mode 100644 index 0000000000..8e9c9ac7c3 --- /dev/null +++ b/t/t4018/golang-func @@ -0,0 +1,4 @@ +func RIGHT() { + a := 5 + b := ChangeMe +} diff --git a/t/t4018/golang-interface b/t/t4018/golang-interface new file mode 100644 index 0000000000..553bedec96 --- /dev/null +++ b/t/t4018/golang-interface @@ -0,0 +1,4 @@ +type RIGHT interface { + a() Type + b() ChangeMe +} diff --git a/t/t4018/golang-long-func b/t/t4018/golang-long-func new file mode 100644 index 0000000000..ac3a77b5c4 --- /dev/null +++ b/t/t4018/golang-long-func @@ -0,0 +1,5 @@ +func RIGHT(aVeryVeryVeryLongVariableName AVeryVeryVeryLongType, + anotherLongVariableName AnotherLongType) { + a := 5 + b := ChangeMe +} diff --git a/t/t4018/golang-struct b/t/t4018/golang-struct new file mode 100644 index 0000000000..5deda77fee --- /dev/null +++ b/t/t4018/golang-struct @@ -0,0 +1,4 @@ +type RIGHT struct { + a Type + b ChangeMe +} diff --git a/t/t4027-diff-submodule.sh b/t/t4027-diff-submodule.sh index 518bf9524e..2ffd11a142 100755 --- a/t/t4027-diff-submodule.sh +++ b/t/t4027-diff-submodule.sh @@ -113,35 +113,6 @@ test_expect_success 'git diff HEAD with dirty submodule (work tree, refs match)' ! test -s actual4 ' -test_expect_success 'git diff HEAD with dirty submodule (work tree, refs match) [.git/config]' ' - git config diff.ignoreSubmodules all && - git diff HEAD >actual && - ! test -s actual && - git config submodule.subname.ignore none && - git config submodule.subname.path sub && - git diff HEAD >actual && - sed -e "1,/^@@/d" actual >actual.body && - expect_from_to >expect.body $subprev $subprev-dirty && - test_cmp expect.body actual.body && - git config submodule.subname.ignore all && - git diff HEAD >actual2 && - ! test -s actual2 && - git config submodule.subname.ignore untracked && - git diff HEAD >actual3 && - sed -e "1,/^@@/d" actual3 >actual3.body && - expect_from_to >expect.body $subprev $subprev-dirty && - test_cmp expect.body actual3.body && - git config submodule.subname.ignore dirty && - git diff HEAD >actual4 && - ! test -s actual4 && - git diff HEAD --ignore-submodules=none >actual && - sed -e "1,/^@@/d" actual >actual.body && - expect_from_to >expect.body $subprev $subprev-dirty && - test_cmp expect.body actual.body && - git config --remove-section submodule.subname && - git config --unset diff.ignoreSubmodules -' - test_expect_success 'git diff HEAD with dirty submodule (work tree, refs match) [.gitmodules]' ' git config diff.ignoreSubmodules dirty && git diff HEAD >actual && @@ -208,24 +179,6 @@ test_expect_success 'git diff HEAD with dirty submodule (untracked, refs match)' ! test -s actual4 ' -test_expect_success 'git diff HEAD with dirty submodule (untracked, refs match) [.git/config]' ' - git config submodule.subname.ignore all && - git config submodule.subname.path sub && - git diff HEAD >actual2 && - ! test -s actual2 && - git config submodule.subname.ignore untracked && - git diff HEAD >actual3 && - ! test -s actual3 && - git config submodule.subname.ignore dirty && - git diff HEAD >actual4 && - ! test -s actual4 && - git diff --ignore-submodules=none HEAD >actual && - sed -e "1,/^@@/d" actual >actual.body && - expect_from_to >expect.body $subprev $subprev-dirty && - test_cmp expect.body actual.body && - git config --remove-section submodule.subname -' - test_expect_success 'git diff HEAD with dirty submodule (untracked, refs match) [.gitmodules]' ' git config --add -f .gitmodules submodule.subname.ignore all && git config --add -f .gitmodules submodule.subname.path sub && @@ -261,26 +214,6 @@ test_expect_success 'git diff between submodule commits' ' ! test -s actual ' -test_expect_success 'git diff between submodule commits [.git/config]' ' - git diff HEAD^..HEAD >actual && - sed -e "1,/^@@/d" actual >actual.body && - expect_from_to >expect.body $subtip $subprev && - test_cmp expect.body actual.body && - git config submodule.subname.ignore dirty && - git config submodule.subname.path sub && - git diff HEAD^..HEAD >actual && - sed -e "1,/^@@/d" actual >actual.body && - expect_from_to >expect.body $subtip $subprev && - test_cmp expect.body actual.body && - git config submodule.subname.ignore all && - git diff HEAD^..HEAD >actual && - ! test -s actual && - git diff --ignore-submodules=dirty HEAD^..HEAD >actual && - sed -e "1,/^@@/d" actual >actual.body && - expect_from_to >expect.body $subtip $subprev && - git config --remove-section submodule.subname -' - test_expect_success 'git diff between submodule commits [.gitmodules]' ' git diff HEAD^..HEAD >actual && sed -e "1,/^@@/d" actual >actual.body && diff --git a/t/t4035-diff-quiet.sh b/t/t4035-diff-quiet.sh index 2f1737fcef..0352bf81a9 100755 --- a/t/t4035-diff-quiet.sh +++ b/t/t4035-diff-quiet.sh @@ -147,7 +147,7 @@ test_expect_success 'git diff --ignore-all-space, both files outside repo' ' ' test_expect_success 'git diff --quiet ignores stat-change only entries' ' - test-chmtime +10 a && + test-tool chmtime +10 a && echo modified >>b && test_expect_code 1 git diff --quiet ' diff --git a/t/t4045-diff-relative.sh b/t/t4045-diff-relative.sh index 3950f5034d..6471a68701 100755 --- a/t/t4045-diff-relative.sh +++ b/t/t4045-diff-relative.sh @@ -12,62 +12,76 @@ test_expect_success 'setup' ' git commit -m one ' -check_diff() { -expect=$1; shift -cat >expected <<EOF -diff --git a/$expect b/$expect -new file mode 100644 -index 0000000..25c05ef ---- /dev/null -+++ b/$expect -@@ -0,0 +1 @@ -+other content -EOF -test_expect_success "-p $*" " - git diff -p $* HEAD^ >actual && - test_cmp expected actual -" +check_diff () { + dir=$1 + shift + expect=$1 + shift + cat >expected <<-EOF + diff --git a/$expect b/$expect + new file mode 100644 + index 0000000..25c05ef + --- /dev/null + +++ b/$expect + @@ -0,0 +1 @@ + +other content + EOF + test_expect_success "-p $*" " + git -C '$dir' diff -p $* HEAD^ >actual && + test_cmp expected actual + " } -check_numstat() { -expect=$1; shift -cat >expected <<EOF -1 0 $expect -EOF -test_expect_success "--numstat $*" " - echo '1 0 $expect' >expected && - git diff --numstat $* HEAD^ >actual && - test_cmp expected actual -" +check_numstat () { + dir=$1 + shift + expect=$1 + shift + cat >expected <<-EOF + 1 0 $expect + EOF + test_expect_success "--numstat $*" " + echo '1 0 $expect' >expected && + git -C '$dir' diff --numstat $* HEAD^ >actual && + test_cmp expected actual + " } -check_stat() { -expect=$1; shift -cat >expected <<EOF - $expect | 1 + - 1 file changed, 1 insertion(+) -EOF -test_expect_success "--stat $*" " - git diff --stat $* HEAD^ >actual && - test_i18ncmp expected actual -" +check_stat () { + dir=$1 + shift + expect=$1 + shift + cat >expected <<-EOF + $expect | 1 + + 1 file changed, 1 insertion(+) + EOF + test_expect_success "--stat $*" " + git -C '$dir' diff --stat $* HEAD^ >actual && + test_i18ncmp expected actual + " } -check_raw() { -expect=$1; shift -cat >expected <<EOF -:000000 100644 0000000000000000000000000000000000000000 25c05ef3639d2d270e7fe765a67668f098092bc5 A $expect -EOF -test_expect_success "--raw $*" " - git diff --no-abbrev --raw $* HEAD^ >actual && - test_cmp expected actual -" +check_raw () { + dir=$1 + shift + expect=$1 + shift + cat >expected <<-EOF + :000000 100644 0000000000000000000000000000000000000000 25c05ef3639d2d270e7fe765a67668f098092bc5 A $expect + EOF + test_expect_success "--raw $*" " + git -C '$dir' diff --no-abbrev --raw $* HEAD^ >actual && + test_cmp expected actual + " } -for type in diff numstat stat raw; do - check_$type file2 --relative=subdir/ - check_$type file2 --relative=subdir - check_$type dir/file2 --relative=sub +for type in diff numstat stat raw +do + check_$type . file2 --relative=subdir/ + check_$type . file2 --relative=subdir + check_$type subdir file2 --relative + check_$type . dir/file2 --relative=sub done test_done diff --git a/t/t4051-diff-function-context.sh b/t/t4051-diff-function-context.sh index 3e6b485ecb..2d76a971c4 100755 --- a/t/t4051-diff-function-context.sh +++ b/t/t4051-diff-function-context.sh @@ -85,6 +85,10 @@ test_expect_success 'setup' ' check_diff changed_hello 'changed function' +test_expect_success ' context includes comment' ' + grep "^ .*Hello comment" changed_hello.diff +' + test_expect_success ' context includes begin' ' grep "^ .*Begin of hello" changed_hello.diff ' diff --git a/t/t4051/hello.c b/t/t4051/hello.c index 63b1a1e4ef..73e767e178 100644 --- a/t/t4051/hello.c +++ b/t/t4051/hello.c @@ -1,4 +1,7 @@ +/* + * Hello comment. + */ static void hello(void) // Begin of hello { /* diff --git a/t/t4052-stat-output.sh b/t/t4052-stat-output.sh index 9f563db20a..6e2cf933f7 100755 --- a/t/t4052-stat-output.sh +++ b/t/t4052-stat-output.sh @@ -19,17 +19,33 @@ test_expect_success 'preparation' ' git commit -m message "$name" ' +cat >expect72 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +test_expect_success "format-patch: small change with long name gives more space to the name" ' + git format-patch -1 --stdout >output && + grep " | " output >actual && + test_cmp expect72 actual +' + while read cmd args do - cat >expect <<-'EOF' + cat >expect80 <<-'EOF' ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + EOF test_expect_success "$cmd: small change with long name gives more space to the name" ' git $cmd $args >output && grep " | " output >actual && - test_cmp expect actual + test_cmp expect80 actual ' +done <<\EOF +diff HEAD^ HEAD --stat +show --stat +log -1 --stat +EOF +while read cmd args +do cat >expect <<-'EOF' ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + EOF @@ -79,11 +95,11 @@ test_expect_success 'preparation for big change tests' ' git commit -m message abcd ' -cat >expect80 <<'EOF' - abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +cat >expect72 <<'EOF' + abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF -cat >expect80-graph <<'EOF' -| abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +cat >expect72-graph <<'EOF' +| abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF cat >expect200 <<'EOF' abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ @@ -107,7 +123,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect200 diff HEAD^ HEAD --stat respects expect200 show --stat respects expect200 log -1 --stat @@ -135,7 +151,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect40 diff HEAD^ HEAD --stat respects expect40 show --stat respects expect40 log -1 --stat @@ -163,7 +179,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect40 diff HEAD^ HEAD --stat respects expect40 show --stat respects expect40 log -1 --stat @@ -250,11 +266,11 @@ show --stat log -1 --stat EOF -cat >expect80 <<'EOF' - ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++++++++++ +cat >expect72 <<'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++ EOF -cat >expect80-graph <<'EOF' -| ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++++++++++ +cat >expect72-graph <<'EOF' +| ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++ EOF cat >expect200 <<'EOF' aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ @@ -278,7 +294,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect200 diff HEAD^ HEAD --stat respects expect200 show --stat respects expect200 log -1 --stat @@ -308,7 +324,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect1 diff HEAD^ HEAD --stat respects expect1 show --stat respects expect1 log -1 --stat diff --git a/t/t4059-diff-submodule-not-initialized.sh b/t/t4059-diff-submodule-not-initialized.sh index cd70fd5192..49bca7b48d 100755 --- a/t/t4059-diff-submodule-not-initialized.sh +++ b/t/t4059-diff-submodule-not-initialized.sh @@ -95,7 +95,7 @@ test_expect_success 'submodule not initialized in new clone' ' git clone . sm3 && git -C sm3 diff-tree -p --no-commit-id --submodule=log HEAD >actual && cat >expected <<-EOF && - Submodule sm1 $smhead1...$smhead2 (not initialized) + Submodule sm1 $smhead1...$smhead2 (commits not present) EOF test_cmp expected actual ' diff --git a/t/t4064-diff-oidfind.sh b/t/t4064-diff-oidfind.sh new file mode 100755 index 0000000000..3bdf317af8 --- /dev/null +++ b/t/t4064-diff-oidfind.sh @@ -0,0 +1,68 @@ +#!/bin/sh + +test_description='test finding specific blobs in the revision walking' +. ./test-lib.sh + +test_expect_success 'setup ' ' + git commit --allow-empty -m "empty initial commit" && + + echo "Hello, world!" >greeting && + git add greeting && + git commit -m "add the greeting blob" && # borrowed from Git from the Bottom Up + git tag -m "the blob" greeting $(git rev-parse HEAD:greeting) && + + echo asdf >unrelated && + git add unrelated && + git commit -m "unrelated history" && + + git revert HEAD^ && + + git commit --allow-empty -m "another unrelated commit" +' + +test_expect_success 'find the greeting blob' ' + cat >expect <<-EOF && + Revert "add the greeting blob" + add the greeting blob + EOF + + git log --format=%s --find-object=greeting^{blob} >actual && + + test_cmp expect actual +' + +test_expect_success 'setup a tree' ' + mkdir a && + echo asdf >a/file && + git add a/file && + git commit -m "add a file in a subdirectory" +' + +test_expect_success 'find a tree' ' + cat >expect <<-EOF && + add a file in a subdirectory + EOF + + git log --format=%s -t --find-object=HEAD:a >actual && + + test_cmp expect actual +' + +test_expect_success 'setup a submodule' ' + test_create_repo sub && + test_commit -C sub sub && + git submodule add ./sub sub && + git commit -a -m "add sub" +' + +test_expect_success 'find a submodule' ' + cat >expect <<-EOF && + add sub + EOF + + git log --format=%s --find-object=HEAD:sub >actual && + + test_cmp expect actual +' + +test_done diff --git a/t/t4065-diff-anchored.sh b/t/t4065-diff-anchored.sh new file mode 100755 index 0000000000..b3f510f040 --- /dev/null +++ b/t/t4065-diff-anchored.sh @@ -0,0 +1,94 @@ +#!/bin/sh + +test_description='anchored diff algorithm' + +. ./test-lib.sh + +test_expect_success '--anchored' ' + printf "a\nb\nc\n" >pre && + printf "c\na\nb\n" >post && + + # normally, c is moved to produce the smallest diff + test_expect_code 1 git diff --no-index pre post >diff && + grep "^+c" diff && + + # with anchor, a is moved + test_expect_code 1 git diff --no-index --anchored=c pre post >diff && + grep "^+a" diff +' + +test_expect_success '--anchored multiple' ' + printf "a\nb\nc\nd\ne\nf\n" >pre && + printf "c\na\nb\nf\nd\ne\n" >post && + + # with 1 anchor, c is not moved, but f is moved + test_expect_code 1 git diff --no-index --anchored=c pre post >diff && + grep "^+a" diff && # a is moved instead of c + grep "^+f" diff && + + # with 2 anchors, c and f are not moved + test_expect_code 1 git diff --no-index --anchored=c --anchored=f pre post >diff && + grep "^+a" diff && + grep "^+d" diff # d is moved instead of f +' + +test_expect_success '--anchored with nonexistent line has no effect' ' + printf "a\nb\nc\n" >pre && + printf "c\na\nb\n" >post && + + test_expect_code 1 git diff --no-index --anchored=x pre post >diff && + grep "^+c" diff +' + +test_expect_success '--anchored with non-unique line has no effect' ' + printf "a\nb\nc\nd\ne\nc\n" >pre && + printf "c\na\nb\nc\nd\ne\n" >post && + + test_expect_code 1 git diff --no-index --anchored=c pre post >diff && + grep "^+c" diff +' + +test_expect_success 'diff still produced with impossible multiple --anchored' ' + printf "a\nb\nc\n" >pre && + printf "c\na\nb\n" >post && + + test_expect_code 1 git diff --no-index --anchored=a --anchored=c pre post >diff && + mv post expected_post && + + # Ensure that the diff is correct by applying it and then + # comparing the result with the original + git apply diff && + diff expected_post post +' + +test_expect_success 'later algorithm arguments override earlier ones' ' + printf "a\nb\nc\n" >pre && + printf "c\na\nb\n" >post && + + test_expect_code 1 git diff --no-index --patience --anchored=c pre post >diff && + grep "^+a" diff && + + test_expect_code 1 git diff --no-index --anchored=c --patience pre post >diff && + grep "^+c" diff && + + test_expect_code 1 git diff --no-index --histogram --anchored=c pre post >diff && + grep "^+a" diff && + + test_expect_code 1 git diff --no-index --anchored=c --histogram pre post >diff && + grep "^+c" diff +' + +test_expect_success '--anchored works with other commands like "git show"' ' + printf "a\nb\nc\n" >file && + git add file && + git commit -m foo && + printf "c\na\nb\n" >file && + git add file && + git commit -m foo && + + # with anchor, a is moved + git show --patience --anchored=c >diff && + grep "^+a" diff +' + +test_done diff --git a/t/t4107-apply-ignore-whitespace.sh b/t/t4107-apply-ignore-whitespace.sh index 9e29b5262d..ac72eeaf27 100755 --- a/t/t4107-apply-ignore-whitespace.sh +++ b/t/t4107-apply-ignore-whitespace.sh @@ -178,4 +178,18 @@ test_expect_success 'patch5 fails (--no-ignore-whitespace)' ' test_must_fail git apply --no-ignore-whitespace patch5.patch ' +test_expect_success 'apply --ignore-space-change --inaccurate-eof' ' + echo 1 >file && + git apply --ignore-space-change --inaccurate-eof <<-\EOF && + diff --git a/file b/file + --- a/file + +++ b/file + @@ -1 +1 @@ + -1 + +2 + EOF + printf 2 >expect && + test_cmp expect file +' + test_done diff --git a/t/t4135-apply-weird-filenames.sh b/t/t4135-apply-weird-filenames.sh index 27cb0009fb..c7c688fcc4 100755 --- a/t/t4135-apply-weird-filenames.sh +++ b/t/t4135-apply-weird-filenames.sh @@ -89,4 +89,21 @@ test_expect_success 'traditional, whitespace-damaged, colon in timezone' ' test_cmp expected "post image.txt" ' +cat >diff-from-svn <<\EOF +Index: Makefile +=================================================================== +diff --git a/branches/Makefile +deleted file mode 100644 +--- a/branches/Makefile (revision 13) ++++ /dev/null (nonexistent) +@@ +1 0,0 @@ +- +EOF + +test_expect_success 'apply handles a diff generated by Subversion' ' + >Makefile && + git apply -p2 diff-from-svn && + test_path_is_missing Makefile +' + test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 73b67b4280..1eccfb71d0 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -662,6 +662,11 @@ test_expect_success 'am pauses on conflict' ' test -d .git/rebase-apply ' +test_expect_success 'am --show-current-patch' ' + git am --show-current-patch >actual.patch && + test_cmp .git/rebase-apply/0001 actual.patch +' + test_expect_success 'am --skip works' ' echo goodbye >expected && git am --skip && @@ -1045,4 +1050,16 @@ test_expect_success 'am works with multi-line in-body headers' ' git cat-file commit HEAD | grep "^$LONG$" ' +test_expect_success 'am --quit keeps HEAD where it is' ' + mkdir .git/rebase-apply && + >.git/rebase-apply/last && + >.git/rebase-apply/next && + git rev-parse HEAD^ >.git/ORIG_HEAD && + git rev-parse HEAD >expected && + git am --quit && + test_path_is_missing .git/rebase-apply && + git rev-parse HEAD >actual && + test_cmp expected actual +' + test_done diff --git a/t/t4151-am-abort.sh b/t/t4151-am-abort.sh index 9473c2779e..9d8d3c72e7 100755 --- a/t/t4151-am-abort.sh +++ b/t/t4151-am-abort.sh @@ -46,9 +46,8 @@ do test_expect_success "am$with3 --skip continue after failed am$with3" ' test_must_fail git am$with3 --skip >output && - test_i18ngrep "^Applying" output >output.applying && - test_i18ngrep "^Applying: 6$" output.applying && - test_i18ncmp file-2-expect file-2 && + test_i18ngrep "^Applying: 6$" output && + test_cmp file-2-expect file-2 && test ! -f .git/MERGE_RR ' @@ -172,7 +171,7 @@ test_expect_success 'am --skip leaves index stat info alone' ' git checkout -f --orphan skip-stat-info && git reset && test_commit skip-should-be-untouched && - test-chmtime =0 skip-should-be-untouched.t && + test-tool chmtime =0 skip-should-be-untouched.t && git update-index --refresh && git diff-files --exit-code --quiet && test_must_fail git am 0001-*.patch && @@ -184,7 +183,7 @@ test_expect_success 'am --abort leaves index stat info alone' ' git checkout -f --orphan abort-stat-info && git reset && test_commit abort-should-be-untouched && - test-chmtime =0 abort-should-be-untouched.t && + test-tool chmtime =0 abort-should-be-untouched.t && git update-index --refresh && git diff-files --exit-code --quiet && test_must_fail git am 0001-*.patch && diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh index 1a080e7823..eaf18c81cb 100755 --- a/t/t4200-rerere.sh +++ b/t/t4200-rerere.sh @@ -166,7 +166,7 @@ test_expect_success 'first postimage wins' ' git commit -q -a -m "prefer first over second" && test -f $rr/postimage && - oldmtimepost=$(test-chmtime -v -60 $rr/postimage | cut -f 1) && + oldmtimepost=$(test-tool chmtime --get -60 $rr/postimage) && git checkout -b third master && git show second^:a1 | sed "s/To die: t/To die! T/" >a1 && @@ -179,7 +179,7 @@ test_expect_success 'first postimage wins' ' ' test_expect_success 'rerere updates postimage timestamp' ' - newmtimepost=$(test-chmtime -v +0 $rr/postimage | cut -f 1) && + newmtimepost=$(test-tool chmtime --get $rr/postimage) && test $oldmtimepost -lt $newmtimepost ' @@ -220,9 +220,9 @@ test_expect_success 'set up for garbage collection tests' ' almost_60_days_ago=$((60-60*86400)) && just_over_60_days_ago=$((-1-60*86400)) && - test-chmtime =$just_over_60_days_ago $rr/preimage && - test-chmtime =$almost_60_days_ago $rr/postimage && - test-chmtime =$almost_15_days_ago $rr2/preimage + test-tool chmtime =$just_over_60_days_ago $rr/preimage && + test-tool chmtime =$almost_60_days_ago $rr/postimage && + test-tool chmtime =$almost_15_days_ago $rr2/preimage ' test_expect_success 'gc preserves young or recently used records' ' @@ -232,13 +232,50 @@ test_expect_success 'gc preserves young or recently used records' ' ' test_expect_success 'old records rest in peace' ' - test-chmtime =$just_over_60_days_ago $rr/postimage && - test-chmtime =$just_over_15_days_ago $rr2/preimage && + test-tool chmtime =$just_over_60_days_ago $rr/postimage && + test-tool chmtime =$just_over_15_days_ago $rr2/preimage && git rerere gc && ! test -f $rr/preimage && ! test -f $rr2/preimage ' +rerere_gc_custom_expiry_test () { + five_days="$1" right_now="$2" + test_expect_success "rerere gc with custom expiry ($five_days, $right_now)" ' + rm -fr .git/rr-cache && + rr=.git/rr-cache/$_z40 && + mkdir -p "$rr" && + >"$rr/preimage" && + >"$rr/postimage" && + + two_days_ago=$((-2*86400)) && + test-tool chmtime =$two_days_ago "$rr/preimage" && + test-tool chmtime =$two_days_ago "$rr/postimage" && + + find .git/rr-cache -type f | sort >original && + + git -c "gc.rerereresolved=$five_days" \ + -c "gc.rerereunresolved=$five_days" rerere gc && + find .git/rr-cache -type f | sort >actual && + test_cmp original actual && + + git -c "gc.rerereresolved=$five_days" \ + -c "gc.rerereunresolved=$right_now" rerere gc && + find .git/rr-cache -type f | sort >actual && + test_cmp original actual && + + git -c "gc.rerereresolved=$right_now" \ + -c "gc.rerereunresolved=$right_now" rerere gc && + find .git/rr-cache -type f | sort >actual && + >expect && + test_cmp expect actual + ' +} + +rerere_gc_custom_expiry_test 5 0 + +rerere_gc_custom_expiry_test 5.days.ago now + test_expect_success 'setup: file2 added differently in two branches' ' git reset --hard && @@ -419,24 +456,6 @@ count_pre_post () { test_line_count = "$2" actual } -test_expect_success 'rerere gc' ' - find .git/rr-cache -type f >original && - xargs test-chmtime -172800 <original && - - git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && - find .git/rr-cache -type f >actual && - test_cmp original actual && - - git -c gc.rerereresolved=5 -c gc.rerereunresolved=0 rerere gc && - find .git/rr-cache -type f >actual && - test_cmp original actual && - - git -c gc.rerereresolved=0 -c gc.rerereunresolved=0 rerere gc && - find .git/rr-cache -type f >actual && - >expect && - test_cmp expect actual -' - merge_conflict_resolve () { git reset --hard && test_must_fail git merge six.1 && @@ -446,6 +465,8 @@ merge_conflict_resolve () { } test_expect_success 'multiple identical conflicts' ' + rm -fr .git/rr-cache && + mkdir .git/rr-cache && git reset --hard && test_seq 1 6 >early && @@ -491,7 +512,7 @@ test_expect_success 'multiple identical conflicts' ' count_pre_post 2 0 && # Pretend that the conflicts were made quite some time ago - find .git/rr-cache/ -type f | xargs test-chmtime -172800 && + test-tool chmtime -172800 $(find .git/rr-cache/ -type f) && # Unresolved entries have not expired yet git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && @@ -547,7 +568,7 @@ test_expect_success 'multiple identical conflicts' ' git rerere && # Pretend that the resolutions are old again - find .git/rr-cache/ -type f | xargs test-chmtime -172800 && + test-tool chmtime -172800 $(find .git/rr-cache/ -type f) && # Resolved entries have not expired yet git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && diff --git a/t/t4201-shortlog.sh b/t/t4201-shortlog.sh index 9df054bf05..ff6649ed9a 100755 --- a/t/t4201-shortlog.sh +++ b/t/t4201-shortlog.sh @@ -9,6 +9,7 @@ test_description='git shortlog . ./test-lib.sh test_expect_success 'setup' ' + test_tick && echo 1 >a1 && git add a1 && tree=$(git write-tree) && @@ -59,7 +60,7 @@ fuzz() { file=$1 && sed " s/$_x40/OBJECT_NAME/g - s/$_x05/OBJID/g + s/$_x35/OBJID/g s/^ \{6\}[CTa].*/ SUBJECT/g s/^ \{8\}[^ ].*/ CONTINUATION/g " <"$file" >"$file.fuzzy" && @@ -81,7 +82,7 @@ test_expect_success 'pretty format' ' test_expect_success '--abbrev' ' sed s/SUBJECT/OBJID/ expect.template >expect && - git shortlog --format="%h" --abbrev=5 HEAD >log && + git shortlog --format="%h" --abbrev=35 HEAD >log && fuzz log >log.predictable && test_cmp expect log.predictable ' @@ -126,6 +127,11 @@ test_expect_success !MINGW 'shortlog can read --format=raw output' ' test_cmp expect out ' +test_expect_success 'shortlog from non-git directory refuses extra arguments' ' + test_must_fail env GIT_DIR=non-existing git shortlog foo 2>out && + test_i18ngrep "too many arguments" out +' + test_expect_success 'shortlog should add newline when input line matches wraplen' ' cat >expect <<\EOF && A U Thor (2): diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 8f155da7a5..25b1f8cc73 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -737,6 +737,107 @@ test_expect_success 'log.decorate configuration' ' ' +test_expect_success 'decorate-refs with glob' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b (octopus-b) + octopus-a (octopus-a) + reach + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs="heads/octopus*" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'decorate-refs without globs' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b + octopus-a + reach (tag: reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs="tags/reach" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'multiple decorate-refs' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b (octopus-b) + octopus-a (octopus-a) + reach (tag: reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs="heads/octopus*" \ + --decorate-refs="tags/reach" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'decorate-refs-exclude with glob' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (HEAD -> master) + Merge-tags-octopus-a-and-octopus-b + seventh (tag: seventh) + octopus-b (tag: octopus-b) + octopus-a (tag: octopus-a) + reach (tag: reach, reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs-exclude="heads/octopus*" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'decorate-refs-exclude without globs' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (HEAD -> master) + Merge-tags-octopus-a-and-octopus-b + seventh (tag: seventh) + octopus-b (tag: octopus-b, octopus-b) + octopus-a (tag: octopus-a, octopus-a) + reach (reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs-exclude="tags/reach" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'multiple decorate-refs-exclude' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (HEAD -> master) + Merge-tags-octopus-a-and-octopus-b + seventh (tag: seventh) + octopus-b (tag: octopus-b) + octopus-a (tag: octopus-a) + reach (reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs-exclude="heads/octopus*" \ + --decorate-refs-exclude="tags/reach" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'decorate-refs and decorate-refs-exclude' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (master) + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b + octopus-a + reach (reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs="heads/*" \ + --decorate-refs-exclude="heads/oc*" >actual && + test_cmp expect.decorate actual +' + test_expect_success 'log.decorate config parsing' ' git log --oneline --decorate=full >expect.full && git log --oneline --decorate=short >expect.short && diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index 18aa1b5889..591f35daaf 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -539,25 +539,62 @@ cat >trailers <<EOF Signed-off-by: A U Thor <author@example.com> Acked-by: A U Thor <author@example.com> [ v2 updated patch description ] -Signed-off-by: A U Thor <author@example.com> +Signed-off-by: A U Thor + <author@example.com> EOF -test_expect_success 'pretty format %(trailers) shows trailers' ' +unfold () { + perl -0pe 's/\n\s+/ /g' +} + +test_expect_success 'set up trailer tests' ' echo "Some contents" >trailerfile && git add trailerfile && - git commit -F - <<-EOF && + git commit -F - <<-EOF trailers: this commit message has trailers This commit is a test commit with trailers at the end. We parse this - message and display the trailers using %bT + message and display the trailers using %(trailers). $(cat trailers) EOF +' + +test_expect_success 'pretty format %(trailers) shows trailers' ' git log --no-walk --pretty="%(trailers)" >actual && - cat >expect <<-EOF && - $(cat trailers) + { + cat trailers && + echo + } >expect && + test_cmp expect actual +' - EOF +test_expect_success '%(trailers:only) shows only "key: value" trailers' ' + git log --no-walk --pretty="%(trailers:only)" >actual && + { + grep -v patch.description <trailers && + echo + } >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:unfold) unfolds trailers' ' + git log --no-walk --pretty="%(trailers:unfold)" >actual && + { + unfold <trailers && + echo + } >expect && + test_cmp expect actual +' + +test_expect_success ':only and :unfold work together' ' + git log --no-walk --pretty="%(trailers:only,unfold)" >actual && + git log --no-walk --pretty="%(trailers:unfold,only)" >reverse && + test_cmp actual reverse && + { + grep -v patch.description <trailers | unfold && + echo + } >expect && test_cmp expect actual ' diff --git a/t/t4208-log-magic-pathspec.sh b/t/t4208-log-magic-pathspec.sh index 935df6a65c..a1705f70cf 100755 --- a/t/t4208-log-magic-pathspec.sh +++ b/t/t4208-log-magic-pathspec.sh @@ -93,4 +93,23 @@ test_expect_success 'command line pathspec parsing for "git log"' ' git log --merge -- a ' +test_expect_success 'tree_entry_interesting does not match past submodule boundaries' ' + test_when_finished "rm -rf repo submodule" && + git init submodule && + test_commit -C submodule initial && + git init repo && + >"repo/[bracket]" && + git -C repo add "[bracket]" && + test_tick && + git -C repo commit -m bracket && + git -C repo rev-list HEAD -- "[bracket]" >expect && + + git -C repo submodule add ../submodule && + test_tick && + git -C repo commit -m submodule && + + git -C repo rev-list HEAD -- "[bracket]" >actual && + test_cmp expect actual +' + test_done diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index fe2d4f15a7..2a97b27b0a 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -101,7 +101,7 @@ test_expect_success \ ten=0123456789 && hundred=$ten$ten$ten$ten$ten$ten$ten$ten$ten$ten && echo long filename >a/four$hundred && mkdir a/bin && - test-genrandom "frotz" 500000 >a/bin/sh && + test-tool genrandom "frotz" 500000 >a/bin/sh && printf "A\$Format:%s\$O" "$SUBSTFORMAT" >a/substfile1 && printf "A not substituted O" >a/substfile2 && if test_have_prereq SYMLINKS; then @@ -192,7 +192,7 @@ test_expect_success \ 'validate file modification time' \ 'mkdir extract && "$TAR" xf b.tar -C extract a/a && - test-chmtime -v +0 extract/a/a |cut -f 1 >b.mtime && + test-tool chmtime --get extract/a/a >b.mtime && echo "1117231200" >expected.mtime && test_cmp expected.mtime b.mtime' diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 9c68b99251..54eff03851 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -16,8 +16,8 @@ test_expect_success \ perl -e "print \"a\" x 4096;" > a && perl -e "print \"b\" x 4096;" > b && perl -e "print \"c\" x 4096;" > c && - test-genrandom "seed a" 2097152 > a_big && - test-genrandom "seed b" 2097152 > b_big && + test-tool genrandom "seed a" 2097152 > a_big && + test-tool genrandom "seed b" 2097152 > b_big && git update-index --add a a_big b b_big c && cat c >d && echo foo >>d && git update-index --add d && tree=$(git write-tree) && @@ -311,8 +311,8 @@ test_expect_success 'unpacking with --strict' ' rm -f .git/index && tail -n 10 LIST | git update-index --index-info && ST=$(git write-tree) && - PACK5=$( git rev-list --objects "$LIST" "$LI" "$ST" | \ - git pack-objects test-5 ) && + git rev-list --objects "$LIST" "$LI" "$ST" >actual && + PACK5=$( git pack-objects test-5 <actual ) && PACK6=$( ( echo "$LIST" echo "$LI" @@ -358,8 +358,8 @@ test_expect_success 'index-pack with --strict' ' rm -f .git/index && tail -n 10 LIST | git update-index --index-info && ST=$(git write-tree) && - PACK5=$( git rev-list --objects "$LIST" "$LI" "$ST" | \ - git pack-objects test-5 ) && + git rev-list --objects "$LIST" "$LI" "$ST" >actual && + PACK5=$( git pack-objects test-5 <actual ) && PACK6=$( ( echo "$LIST" echo "$LI" @@ -457,6 +457,11 @@ test_expect_success !PTHREADS,C_LOCALE_OUTPUT 'pack-objects --threads=N or pack. grep -F "no threads support, ignoring pack.threads" err ' +test_expect_success 'pack-objects in too-many-packs mode' ' + GIT_TEST_FULL_IN_PACK_ARRAY=1 git repack -ad && + git fsck +' + # # WARNING! # diff --git a/t/t5301-sliding-window.sh b/t/t5301-sliding-window.sh index cae8c2e882..76f9798ab9 100755 --- a/t/t5301-sliding-window.sh +++ b/t/t5301-sliding-window.sh @@ -12,7 +12,7 @@ test_expect_success \ for i in a b c do echo $i >$i && - test-genrandom "$i" 32768 >>$i && + test-tool genrandom "$i" 32768 >>$i && git update-index --add $i || return 1 done && echo d >d && cat c >>d && git update-index --add d && diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index c2fc584dac..bb9b8bb309 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -15,17 +15,17 @@ test_expect_success \ while test $i -le 100 do iii=$(printf '%03i' $i) - test-genrandom "bar" 200 > wide_delta_$iii && - test-genrandom "baz $iii" 50 >> wide_delta_$iii && - test-genrandom "foo"$i 100 > deep_delta_$iii && - test-genrandom "foo"$(expr $i + 1) 100 >> deep_delta_$iii && - test-genrandom "foo"$(expr $i + 2) 100 >> deep_delta_$iii && + test-tool genrandom "bar" 200 > wide_delta_$iii && + test-tool genrandom "baz $iii" 50 >> wide_delta_$iii && + test-tool genrandom "foo"$i 100 > deep_delta_$iii && + test-tool genrandom "foo"$(expr $i + 1) 100 >> deep_delta_$iii && + test-tool genrandom "foo"$(expr $i + 2) 100 >> deep_delta_$iii && echo $iii >file_$iii && - test-genrandom "$iii" 8192 >>file_$iii && + test-tool genrandom "$iii" 8192 >>file_$iii && git update-index --add file_$iii deep_delta_$iii wide_delta_$iii && i=$(expr $i + 1) || return 1 done && - { echo 101 && test-genrandom 100 8192; } >file_101 && + { echo 101 && test-tool genrandom 100 8192; } >file_101 && git update-index --add file_101 && tree=$(git write-tree) && commit=$(git commit-tree $tree </dev/null) && { @@ -262,4 +262,9 @@ EOF grep "^warning:.* expected .tagger. line" err ' +test_expect_success 'index-pack --fsck-objects also warns upon missing tagger in tag' ' + git index-pack --fsck-objects tag-test-${pack1}.pack 2>err && + grep "^warning:.* expected .tagger. line" err +' + test_done diff --git a/t/t5303-pack-corruption-resilience.sh b/t/t5303-pack-corruption-resilience.sh index 5940ce2084..3634e258f8 100755 --- a/t/t5303-pack-corruption-resilience.sh +++ b/t/t5303-pack-corruption-resilience.sh @@ -19,14 +19,14 @@ test_description='resilience to pack corruptions with redundant objects' # 3) object header is always 2 bytes. create_test_files() { - test-genrandom "foo" 2000 > file_1 && - test-genrandom "foo" 1800 > file_2 && - test-genrandom "foo" 1800 > file_3 && + test-tool genrandom "foo" 2000 > file_1 && + test-tool genrandom "foo" 1800 > file_2 && + test-tool genrandom "foo" 1800 > file_3 && echo " base " >> file_1 && echo " delta1 " >> file_2 && echo " delta delta2 " >> file_3 && - test-genrandom "bar" 150 >> file_2 && - test-genrandom "baz" 100 >> file_3 + test-tool genrandom "bar" 150 >> file_2 && + test-tool genrandom "baz" 100 >> file_3 } create_new_pack() { diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index 133b5842b1..f20f03c103 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -15,7 +15,7 @@ add_blob() { BLOB_FILE=.git/objects/$(echo $BLOB | sed "s/^../&\//") && verbose test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && test_path_is_file $BLOB_FILE && - test-chmtime =+0 $BLOB_FILE + test-tool chmtime =+0 $BLOB_FILE } test_expect_success setup ' @@ -33,7 +33,7 @@ test_expect_success 'prune stale packs' ' orig_pack=$(echo .git/objects/pack/*.pack) && : > .git/objects/tmp_1.pack && : > .git/objects/tmp_2.pack && - test-chmtime =-86501 .git/objects/tmp_1.pack && + test-tool chmtime =-86501 .git/objects/tmp_1.pack && git prune --expire 1.day && test_path_is_file $orig_pack && test_path_is_file .git/objects/tmp_2.pack && @@ -47,7 +47,7 @@ test_expect_success 'prune --expire' ' git prune --expire=1.hour.ago && verbose test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && test_path_is_file $BLOB_FILE && - test-chmtime =-86500 $BLOB_FILE && + test-tool chmtime =-86500 $BLOB_FILE && git prune --expire 1.day && verbose test $before = $(git count-objects | sed "s/ .*//") && test_path_is_missing $BLOB_FILE @@ -57,11 +57,11 @@ test_expect_success 'prune --expire' ' test_expect_success 'gc: implicit prune --expire' ' add_blob && - test-chmtime =-$((2*$week-30)) $BLOB_FILE && + test-tool chmtime =-$((2*$week-30)) $BLOB_FILE && git gc && verbose test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && test_path_is_file $BLOB_FILE && - test-chmtime =-$((2*$week+1)) $BLOB_FILE && + test-tool chmtime =-$((2*$week+1)) $BLOB_FILE && git gc && verbose test $before = $(git count-objects | sed "s/ .*//") && test_path_is_missing $BLOB_FILE @@ -141,7 +141,7 @@ test_expect_success 'prune: do not prune heads listed as an argument' ' test_expect_success 'gc --no-prune' ' add_blob && - test-chmtime =-$((5001*$day)) $BLOB_FILE && + test-tool chmtime =-$((5001*$day)) $BLOB_FILE && git config gc.pruneExpire 2.days.ago && git gc --no-prune && verbose test 1 = $(git count-objects | sed "s/ .*//") && @@ -163,7 +163,7 @@ test_expect_success 'gc respects gc.pruneExpire' ' test_expect_success 'gc --prune=<date>' ' add_blob && - test-chmtime =-$((5001*$day)) $BLOB_FILE && + test-tool chmtime =-$((5001*$day)) $BLOB_FILE && git gc --prune=5002.days.ago && test_path_is_file $BLOB_FILE && git gc --prune=5000.days.ago && @@ -205,7 +205,7 @@ test_expect_success 'prune --expire=never' ' test_expect_success 'gc: prune old objects after local clone' ' add_blob && - test-chmtime =-$((2*$week+1)) $BLOB_FILE && + test-tool chmtime =-$((2*$week+1)) $BLOB_FILE && git clone --no-hardlinks . aclone && ( cd aclone && @@ -283,4 +283,51 @@ test_expect_success 'prune: handle alternate object database' ' git -C B prune ' +test_expect_success 'prune: handle index in multiple worktrees' ' + git worktree add second-worktree && + echo "new blob for second-worktree" >second-worktree/blob && + git -C second-worktree add blob && + git prune --expire=now && + git -C second-worktree show :blob >actual && + test_cmp second-worktree/blob actual +' + +test_expect_success 'prune: handle HEAD in multiple worktrees' ' + git worktree add --detach third-worktree && + echo "new blob for third-worktree" >third-worktree/blob && + git -C third-worktree add blob && + git -C third-worktree commit -m "third" && + rm .git/worktrees/third-worktree/index && + test_must_fail git -C third-worktree show :blob && + git prune --expire=now && + git -C third-worktree show HEAD:blob >actual && + test_cmp third-worktree/blob actual +' + +test_expect_success 'prune: handle HEAD reflog in multiple worktrees' ' + git config core.logAllRefUpdates true && + echo "lost blob for third-worktree" >expected && + ( + cd third-worktree && + cat ../expected >blob && + git add blob && + git commit -m "second commit in third" && + git reset --hard HEAD^ + ) && + git prune --expire=now && + SHA1=`git hash-object expected` && + git -C third-worktree show "$SHA1" >actual && + test_cmp expected actual +' + +test_expect_success 'prune: handle expire option correctly' ' + test_must_fail git prune --expire 2>error && + test_i18ngrep "requires a value" error && + + test_must_fail git prune --expire=nyah 2>error && + test_i18ngrep "malformed expiration" error && + + git prune --no-expire +' + test_done diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index 20e2473a03..423c0a475f 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -264,9 +264,9 @@ test_expect_success 'pack with missing parent' ' ' test_expect_success JGIT 'we can read jgit bitmaps' ' - git clone . compat-jgit && + git clone --bare . compat-jgit.git && ( - cd compat-jgit && + cd compat-jgit.git && rm -f .git/objects/pack/*.bitmap && jgit gc && git rev-list --test-bitmap HEAD @@ -274,9 +274,9 @@ test_expect_success JGIT 'we can read jgit bitmaps' ' ' test_expect_success JGIT 'jgit can read our bitmaps' ' - git clone . compat-us && + git clone --bare . compat-us.git && ( - cd compat-us && + cd compat-us.git && git repack -adb && # jgit gc will barf if it does not like our bitmaps jgit gc @@ -284,7 +284,7 @@ test_expect_success JGIT 'jgit can read our bitmaps' ' ' test_expect_success 'splitting packs does not generate bogus bitmaps' ' - test-genrandom foo $((1024 * 1024)) >rand && + test-tool genrandom foo $((1024 * 1024)) >rand && git add rand && git commit -m "commit with big file" && git -c pack.packSizeLimit=500k repack -adb && diff --git a/t/t5313-pack-bounds-checks.sh b/t/t5313-pack-bounds-checks.sh index 9372508c99..4fe4ad9d61 100755 --- a/t/t5313-pack-bounds-checks.sh +++ b/t/t5313-pack-bounds-checks.sh @@ -163,8 +163,8 @@ test_expect_success 'bogus offset inside v2 extended table' ' test_expect_success 'bogus OFS_DELTA in packfile' ' # Generate a pack with a delta in it. - base=$(test-genrandom foo 3000 | git hash-object --stdin -w) && - delta=$(test-genrandom foo 2000 | git hash-object --stdin -w) && + base=$(test-tool genrandom foo 3000 | git hash-object --stdin -w) && + delta=$(test-tool genrandom foo 2000 | git hash-object --stdin -w) && do_pack "$base $delta" --delta-base-offset && rm -f .git/objects/??/* && diff --git a/t/t5314-pack-cycle-detection.sh b/t/t5314-pack-cycle-detection.sh index f7dbdfb412..f31995d3d2 100755 --- a/t/t5314-pack-cycle-detection.sh +++ b/t/t5314-pack-cycle-detection.sh @@ -73,7 +73,7 @@ make_pack () { } test_expect_success 'setup' ' - test-genrandom base 4096 >base && + test-tool genrandom base 4096 >base && for i in one two do # we want shared content here to encourage deltas... diff --git a/t/t5316-pack-delta-depth.sh b/t/t5316-pack-delta-depth.sh index 2ed479b712..0f06c40eb1 100755 --- a/t/t5316-pack-delta-depth.sh +++ b/t/t5316-pack-delta-depth.sh @@ -47,7 +47,7 @@ test_description='pack-objects breaks long cross-pack delta chains' # repeatedly-modified file to generate the delta chain). test_expect_success 'create series of packs' ' - test-genrandom foo 4096 >content && + test-tool genrandom foo 4096 >content && prev= && for i in $(test_seq 1 10) do diff --git a/t/t5317-pack-objects-filter-objects.sh b/t/t5317-pack-objects-filter-objects.sh new file mode 100755 index 0000000000..1b0acc383b --- /dev/null +++ b/t/t5317-pack-objects-filter-objects.sh @@ -0,0 +1,375 @@ +#!/bin/sh + +test_description='git pack-objects using object filtering' + +. ./test-lib.sh + +# Test blob:none filter. + +test_expect_success 'setup r1' ' + echo "{print \$1}" >print_1.awk && + echo "{print \$2}" >print_2.awk && + + git init r1 && + for n in 1 2 3 4 5 + do + echo "This is file: $n" > r1/file.$n + git -C r1 add file.$n + git -C r1 commit -m "$n" + done +' + +test_expect_success 'verify blob count in normal packfile' ' + git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r1 pack-objects --rev --stdout >all.pack <<-EOF && + HEAD + EOF + git -C r1 index-pack ../all.pack && + git -C r1 verify-pack -v ../all.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify blob:none packfile has no blobs' ' + git -C r1 pack-objects --rev --stdout --filter=blob:none >filter.pack <<-EOF && + HEAD + EOF + git -C r1 index-pack ../filter.pack && + git -C r1 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + nr=$(wc -l <observed) && + test 0 -eq $nr +' + +test_expect_success 'verify normal and blob:none packfiles have same commits/trees' ' + git -C r1 verify-pack -v ../all.pack \ + | grep -E "commit|tree" \ + | awk -f print_1.awk \ + | sort >expected && + git -C r1 verify-pack -v ../filter.pack \ + | grep -E "commit|tree" \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +# Test blob:limit=<n>[kmg] filter. +# We boundary test around the size parameter. The filter is strictly less than +# the value, so size 500 and 1000 should have the same results, but 1001 should +# filter more. + +test_expect_success 'setup r2' ' + git init r2 && + for n in 1000 10000 + do + printf "%"$n"s" X > r2/large.$n + git -C r2 add large.$n + git -C r2 commit -m "$n" + done +' + +test_expect_success 'verify blob count in normal packfile' ' + git -C r2 ls-files -s large.1000 large.10000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 pack-objects --rev --stdout >all.pack <<-EOF && + HEAD + EOF + git -C r2 index-pack ../all.pack && + git -C r2 verify-pack -v ../all.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify blob:limit=500 omits all blobs' ' + git -C r2 pack-objects --rev --stdout --filter=blob:limit=500 >filter.pack <<-EOF && + HEAD + EOF + git -C r2 index-pack ../filter.pack && + git -C r2 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + nr=$(wc -l <observed) && + test 0 -eq $nr +' + +test_expect_success 'verify blob:limit=1000' ' + git -C r2 pack-objects --rev --stdout --filter=blob:limit=1000 >filter.pack <<-EOF && + HEAD + EOF + git -C r2 index-pack ../filter.pack && + git -C r2 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + nr=$(wc -l <observed) && + test 0 -eq $nr +' + +test_expect_success 'verify blob:limit=1001' ' + git -C r2 ls-files -s large.1000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=1001 >filter.pack <<-EOF && + HEAD + EOF + git -C r2 index-pack ../filter.pack && + git -C r2 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify blob:limit=10001' ' + git -C r2 ls-files -s large.1000 large.10000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=10001 >filter.pack <<-EOF && + HEAD + EOF + git -C r2 index-pack ../filter.pack && + git -C r2 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify blob:limit=1k' ' + git -C r2 ls-files -s large.1000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=1k >filter.pack <<-EOF && + HEAD + EOF + git -C r2 index-pack ../filter.pack && + git -C r2 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify blob:limit=1m' ' + git -C r2 ls-files -s large.1000 large.10000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=1m >filter.pack <<-EOF && + HEAD + EOF + git -C r2 index-pack ../filter.pack && + git -C r2 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify normal and blob:limit packfiles have same commits/trees' ' + git -C r2 verify-pack -v ../all.pack \ + | grep -E "commit|tree" \ + | awk -f print_1.awk \ + | sort >expected && + git -C r2 verify-pack -v ../filter.pack \ + | grep -E "commit|tree" \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +# Test sparse:path=<path> filter. +# Use a local file containing a sparse-checkout specification to filter +# out blobs not required for the corresponding sparse-checkout. We do not +# require sparse-checkout to actually be enabled. + +test_expect_success 'setup r3' ' + git init r3 && + mkdir r3/dir1 && + for n in sparse1 sparse2 + do + echo "This is file: $n" > r3/$n + git -C r3 add $n + echo "This is file: dir1/$n" > r3/dir1/$n + git -C r3 add dir1/$n + done && + git -C r3 commit -m "sparse" && + echo dir1/ >pattern1 && + echo sparse1 >pattern2 +' + +test_expect_success 'verify blob count in normal packfile' ' + git -C r3 ls-files -s sparse1 sparse2 dir1/sparse1 dir1/sparse2 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r3 pack-objects --rev --stdout >all.pack <<-EOF && + HEAD + EOF + git -C r3 index-pack ../all.pack && + git -C r3 verify-pack -v ../all.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify sparse:path=pattern1' ' + git -C r3 ls-files -s dir1/sparse1 dir1/sparse2 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r3 pack-objects --rev --stdout --filter=sparse:path=../pattern1 >filter.pack <<-EOF && + HEAD + EOF + git -C r3 index-pack ../filter.pack && + git -C r3 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify normal and sparse:path=pattern1 packfiles have same commits/trees' ' + git -C r3 verify-pack -v ../all.pack \ + | grep -E "commit|tree" \ + | awk -f print_1.awk \ + | sort >expected && + git -C r3 verify-pack -v ../filter.pack \ + | grep -E "commit|tree" \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify sparse:path=pattern2' ' + git -C r3 ls-files -s sparse1 dir1/sparse1 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r3 pack-objects --rev --stdout --filter=sparse:path=../pattern2 >filter.pack <<-EOF && + HEAD + EOF + git -C r3 index-pack ../filter.pack && + git -C r3 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify normal and sparse:path=pattern2 packfiles have same commits/trees' ' + git -C r3 verify-pack -v ../all.pack \ + | grep -E "commit|tree" \ + | awk -f print_1.awk \ + | sort >expected && + git -C r3 verify-pack -v ../filter.pack \ + | grep -E "commit|tree" \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +# Test sparse:oid=<oid-ish> filter. +# Like sparse:path, but we get the sparse-checkout specification from +# a blob rather than a file on disk. + +test_expect_success 'setup r4' ' + git init r4 && + mkdir r4/dir1 && + for n in sparse1 sparse2 + do + echo "This is file: $n" > r4/$n + git -C r4 add $n + echo "This is file: dir1/$n" > r4/dir1/$n + git -C r4 add dir1/$n + done && + echo dir1/ >r4/pattern && + git -C r4 add pattern && + git -C r4 commit -m "pattern" +' + +test_expect_success 'verify blob count in normal packfile' ' + git -C r4 ls-files -s pattern sparse1 sparse2 dir1/sparse1 dir1/sparse2 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r4 pack-objects --rev --stdout >all.pack <<-EOF && + HEAD + EOF + git -C r4 index-pack ../all.pack && + git -C r4 verify-pack -v ../all.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify sparse:oid=OID' ' + git -C r4 ls-files -s dir1/sparse1 dir1/sparse2 \ + | awk -f print_2.awk \ + | sort >expected && + oid=$(git -C r4 ls-files -s pattern | awk -f print_2.awk) && + git -C r4 pack-objects --rev --stdout --filter=sparse:oid=$oid >filter.pack <<-EOF && + HEAD + EOF + git -C r4 index-pack ../filter.pack && + git -C r4 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify sparse:oid=oid-ish' ' + git -C r4 ls-files -s dir1/sparse1 dir1/sparse2 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r4 pack-objects --rev --stdout --filter=sparse:oid=master:pattern >filter.pack <<-EOF && + HEAD + EOF + git -C r4 index-pack ../filter.pack && + git -C r4 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + +# Delete some loose objects and use pack-objects, but WITHOUT any filtering. +# This models previously omitted objects that we did not receive. + +test_expect_success 'setup r1 - delete loose blobs' ' + git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \ + | awk -f print_2.awk \ + | sort >expected && + for id in `cat expected | sed "s|..|&/|"` + do + rm r1/.git/objects/$id + done +' + +test_expect_success 'verify pack-objects fails w/ missing objects' ' + test_must_fail git -C r1 pack-objects --rev --stdout >miss.pack <<-EOF + HEAD + EOF +' + +test_expect_success 'verify pack-objects fails w/ --missing=error' ' + test_must_fail git -C r1 pack-objects --rev --stdout --missing=error >miss.pack <<-EOF + HEAD + EOF +' + +test_expect_success 'verify pack-objects w/ --missing=allow-any' ' + git -C r1 pack-objects --rev --stdout --missing=allow-any >miss.pack <<-EOF + HEAD + EOF +' + +test_done diff --git a/t/t5318-commit-graph.sh b/t/t5318-commit-graph.sh new file mode 100755 index 0000000000..a380419b65 --- /dev/null +++ b/t/t5318-commit-graph.sh @@ -0,0 +1,224 @@ +#!/bin/sh + +test_description='commit graph' +. ./test-lib.sh + +test_expect_success 'setup full repo' ' + mkdir full && + cd "$TRASH_DIRECTORY/full" && + git init && + git config core.commitGraph true && + objdir=".git/objects" +' + +test_expect_success 'write graph with no packs' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write --object-dir . && + test_path_is_file info/commit-graph +' + +test_expect_success 'create commits and repack' ' + cd "$TRASH_DIRECTORY/full" && + for i in $(test_seq 3) + do + test_commit $i && + git branch commits/$i + done && + git repack +' + +graph_git_two_modes() { + git -c core.graph=true $1 >output + git -c core.graph=false $1 >expect + test_cmp output expect +} + +graph_git_behavior() { + MSG=$1 + DIR=$2 + BRANCH=$3 + COMPARE=$4 + test_expect_success "check normal git operations: $MSG" ' + cd "$TRASH_DIRECTORY/$DIR" && + graph_git_two_modes "log --oneline $BRANCH" && + graph_git_two_modes "log --topo-order $BRANCH" && + graph_git_two_modes "log --graph $COMPARE..$BRANCH" && + graph_git_two_modes "branch -vv" && + graph_git_two_modes "merge-base -a $BRANCH $COMPARE" + ' +} + +graph_git_behavior 'no graph' full commits/3 commits/1 + +graph_read_expect() { + OPTIONAL="" + NUM_CHUNKS=3 + if test ! -z $2 + then + OPTIONAL=" $2" + NUM_CHUNKS=$((3 + $(echo "$2" | wc -w))) + fi + cat >expect <<- EOF + header: 43475048 1 1 $NUM_CHUNKS 0 + num_commits: $1 + chunks: oid_fanout oid_lookup commit_metadata$OPTIONAL + EOF + git commit-graph read >output && + test_cmp expect output +} + +test_expect_success 'write graph' ' + cd "$TRASH_DIRECTORY/full" && + graph1=$(git commit-graph write) && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "3" +' + +graph_git_behavior 'graph exists' full commits/3 commits/1 + +test_expect_success 'Add more commits' ' + cd "$TRASH_DIRECTORY/full" && + git reset --hard commits/1 && + for i in $(test_seq 4 5) + do + test_commit $i && + git branch commits/$i + done && + git reset --hard commits/2 && + for i in $(test_seq 6 7) + do + test_commit $i && + git branch commits/$i + done && + git reset --hard commits/2 && + git merge commits/4 && + git branch merge/1 && + git reset --hard commits/4 && + git merge commits/6 && + git branch merge/2 && + git reset --hard commits/3 && + git merge commits/5 commits/7 && + git branch merge/3 && + git repack +' + +# Current graph structure: +# +# __M3___ +# / | \ +# 3 M1 5 M2 7 +# |/ \|/ \| +# 2 4 6 +# |___/____/ +# 1 + +test_expect_success 'write graph with merges' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "10" "large_edges" +' + +graph_git_behavior 'merge 1 vs 2' full merge/1 merge/2 +graph_git_behavior 'merge 1 vs 3' full merge/1 merge/3 +graph_git_behavior 'merge 2 vs 3' full merge/2 merge/3 + +test_expect_success 'Add one more commit' ' + cd "$TRASH_DIRECTORY/full" && + test_commit 8 && + git branch commits/8 && + ls $objdir/pack | grep idx >existing-idx && + git repack && + ls $objdir/pack| grep idx | grep -v --file=existing-idx >new-idx +' + +# Current graph structure: +# +# 8 +# | +# __M3___ +# / | \ +# 3 M1 5 M2 7 +# |/ \|/ \| +# 2 4 6 +# |___/____/ +# 1 + +graph_git_behavior 'mixed mode, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'mixed mode, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'write graph with new commit' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "11" "large_edges" +' + +graph_git_behavior 'full graph, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'full graph, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'write graph with nothing new' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "11" "large_edges" +' + +graph_git_behavior 'cleared graph, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'cleared graph, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'build graph from latest pack with closure' ' + cd "$TRASH_DIRECTORY/full" && + cat new-idx | git commit-graph write --stdin-packs && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "9" "large_edges" +' + +graph_git_behavior 'graph from pack, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'graph from pack, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'build graph from commits with closure' ' + cd "$TRASH_DIRECTORY/full" && + git tag -a -m "merge" tag/merge merge/2 && + git rev-parse tag/merge >commits-in && + git rev-parse merge/1 >>commits-in && + cat commits-in | git commit-graph write --stdin-commits && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "6" +' + +graph_git_behavior 'graph from commits, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'graph from commits, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'build graph from commits with append' ' + cd "$TRASH_DIRECTORY/full" && + git rev-parse merge/3 | git commit-graph write --stdin-commits --append && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "10" "large_edges" +' + +graph_git_behavior 'append graph, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'append graph, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'setup bare repo' ' + cd "$TRASH_DIRECTORY" && + git clone --bare --no-local full bare && + cd bare && + git config core.commitGraph true && + baredir="./objects" +' + +graph_git_behavior 'bare repo, commit 8 vs merge 1' bare commits/8 merge/1 +graph_git_behavior 'bare repo, commit 8 vs merge 2' bare commits/8 merge/2 + +test_expect_success 'write graph in bare repo' ' + cd "$TRASH_DIRECTORY/bare" && + git commit-graph write && + test_path_is_file $baredir/info/commit-graph && + graph_read_expect "11" "large_edges" +' + +graph_git_behavior 'bare repo with graph, commit 8 vs merge 1' bare commits/8 merge/1 +graph_git_behavior 'bare repo with graph, commit 8 vs merge 2' bare commits/8 merge/2 + +test_done diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index d375d7110d..911eae1bf7 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -180,7 +180,7 @@ test_expect_success 'receive-pack runs auto-gc in remote repo' ' # And create a file that follows the temporary object naming # convention for the auto-gc to remove : >.git/objects/tmp_test_object && - test-chmtime =-1209601 .git/objects/tmp_test_object + test-tool chmtime =-1209601 .git/objects/tmp_test_object ) && ( cd parent && diff --git a/t/t5404-tracking-branches.sh b/t/t5404-tracking-branches.sh index 2b8c0bac7d..2762f420bc 100755 --- a/t/t5404-tracking-branches.sh +++ b/t/t5404-tracking-branches.sh @@ -56,7 +56,7 @@ test_expect_success 'deleted branches have their tracking branches removed' ' test_expect_success 'already deleted tracking branches ignored' ' git branch -d -r origin/b3 && git push origin :b3 >output 2>&1 && - ! grep error output + ! grep "^error: " output ' test_done diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 80a1a3239a..0680dec808 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -482,24 +482,24 @@ test_expect_success 'set up tests of missing reference' ' test_expect_success 'test lonely missing ref' ' ( cd client && - test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy - ) >/dev/null 2>error-m && + test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy 2>../error-m + ) && test_i18ncmp expect-error error-m ' test_expect_success 'test missing ref after existing' ' ( cd client && - test_must_fail git fetch-pack --no-progress .. refs/heads/A refs/heads/xyzzy - ) >/dev/null 2>error-em && + test_must_fail git fetch-pack --no-progress .. refs/heads/A refs/heads/xyzzy 2>../error-em + ) && test_i18ncmp expect-error error-em ' test_expect_success 'test missing ref before existing' ' ( cd client && - test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy refs/heads/A - ) >/dev/null 2>error-me && + test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy refs/heads/A 2>../error-me + ) && test_i18ncmp expect-error error-me ' @@ -755,4 +755,67 @@ test_expect_success 'fetching deepen' ' ) ' +test_expect_success 'filtering by size' ' + rm -rf server client && + test_create_repo server && + test_commit -C server one && + test_config -C server uploadpack.allowfilter 1 && + + test_create_repo client && + git -C client fetch-pack --filter=blob:limit=0 ../server HEAD && + + # Ensure that object is not inadvertently fetched + test_must_fail git -C client cat-file -e $(git hash-object server/one.t) +' + +test_expect_success 'filtering by size has no effect if support for it is not advertised' ' + rm -rf server client && + test_create_repo server && + test_commit -C server one && + + test_create_repo client && + git -C client fetch-pack --filter=blob:limit=0 ../server HEAD 2> err && + + # Ensure that object is fetched + git -C client cat-file -e $(git hash-object server/one.t) && + + test_i18ngrep "filtering not recognized by server" err +' + +fetch_filter_blob_limit_zero () { + SERVER="$1" + URL="$2" + + rm -rf "$SERVER" client && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" one && + test_config -C "$SERVER" uploadpack.allowfilter 1 && + + git clone "$URL" client && + test_config -C client extensions.partialclone origin && + + test_commit -C "$SERVER" two && + + git -C client fetch --filter=blob:limit=0 origin HEAD:somewhere && + + # Ensure that commit is fetched, but blob is not + test_config -C client extensions.partialclone "arbitrary string" && + git -C client cat-file -e $(git -C "$SERVER" rev-parse two) && + test_must_fail git -C client cat-file -e $(git hash-object "$SERVER/two.t") +} + +test_expect_success 'fetch with --filter=blob:limit=0' ' + fetch_filter_blob_limit_zero server server +' + +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'fetch with --filter=blob:limit=0 and HTTP' ' + fetch_filter_blob_limit_zero "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" +' + +stop_httpd + + test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 668c54be41..ae5a530a2d 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -222,12 +222,9 @@ test_expect_success 'fetch uses remote ref names to describe new refs' ' ( cd descriptive && git fetch o 2>actual && - grep " -> refs/crazyheads/descriptive-branch$" actual | - test_i18ngrep "new branch" && - grep " -> descriptive-tag$" actual | - test_i18ngrep "new tag" && - grep " -> crazy$" actual | - test_i18ngrep "new ref" + test_i18ngrep "new branch.* -> refs/crazyheads/descriptive-branch$" actual && + test_i18ngrep "new tag.* -> descriptive-tag$" actual && + test_i18ngrep "new ref.* -> crazy$" actual ) && git checkout master ' @@ -543,82 +540,232 @@ test_expect_success "should be able to fetch with duplicate refspecs" ' set_config_tristate () { # var=$1 val=$2 case "$2" in - unset) test_unconfig "$1" ;; - *) git config "$1" "$2" ;; + unset) + test_unconfig "$1" + ;; + *) + git config "$1" "$2" + key=$(echo $1 | sed -e 's/^remote\.origin/fetch/') + git_fetch_c="$git_fetch_c -c $key=$2" + ;; esac } test_configured_prune () { - fetch_prune=$1 remote_origin_prune=$2 cmdline=$3 expected=$4 + test_configured_prune_type "$@" "name" + test_configured_prune_type "$@" "link" +} - test_expect_success "prune fetch.prune=$1 remote.origin.prune=$2${3:+ $3}; $4" ' +test_configured_prune_type () { + fetch_prune=$1 + remote_origin_prune=$2 + fetch_prune_tags=$3 + remote_origin_prune_tags=$4 + expected_branch=$5 + expected_tag=$6 + cmdline=$7 + mode=$8 + + if test -z "$cmdline_setup" + then + test_expect_success 'setup cmdline_setup variable for subsequent test' ' + remote_url="file://$(git -C one config remote.origin.url)" && + remote_fetch="$(git -C one config remote.origin.fetch)" && + cmdline_setup="\"$remote_url\" \"$remote_fetch\"" + ' + fi + + if test "$mode" = 'link' + then + new_cmdline="" + + if test "$cmdline" = "" + then + new_cmdline=$cmdline_setup + else + new_cmdline=$(printf "%s" "$cmdline" | perl -pe 's[origin(?!/)]["'"$remote_url"'"]g') + fi + + if test "$fetch_prune_tags" = 'true' || + test "$remote_origin_prune_tags" = 'true' + then + if ! printf '%s' "$cmdline\n" | grep -q refs/remotes/origin/ + then + new_cmdline="$new_cmdline refs/tags/*:refs/tags/*" + fi + fi + + cmdline="$new_cmdline" + fi + + test_expect_success "$mode prune fetch.prune=$1 remote.origin.prune=$2 fetch.pruneTags=$3 remote.origin.pruneTags=$4${7:+ $7}; branch:$5 tag:$6" ' # make sure a newbranch is there in . and also in one git branch -f newbranch && + git tag -f newtag && ( cd one && test_unconfig fetch.prune && + test_unconfig fetch.pruneTags && test_unconfig remote.origin.prune && - git fetch && - git rev-parse --verify refs/remotes/origin/newbranch + test_unconfig remote.origin.pruneTags && + git fetch '"$cmdline_setup"' && + git rev-parse --verify refs/remotes/origin/newbranch && + git rev-parse --verify refs/tags/newtag ) && # now remove it git branch -d newbranch && + git tag -d newtag && # then test ( cd one && + git_fetch_c="" && set_config_tristate fetch.prune $fetch_prune && + set_config_tristate fetch.pruneTags $fetch_prune_tags && set_config_tristate remote.origin.prune $remote_origin_prune && - - git fetch $cmdline && - case "$expected" in + set_config_tristate remote.origin.pruneTags $remote_origin_prune_tags && + + if test "$mode" != "link" + then + git_fetch_c="" + fi && + git$git_fetch_c fetch '"$cmdline"' && + case "$expected_branch" in pruned) test_must_fail git rev-parse --verify refs/remotes/origin/newbranch ;; kept) git rev-parse --verify refs/remotes/origin/newbranch ;; + esac && + case "$expected_tag" in + pruned) + test_must_fail git rev-parse --verify refs/tags/newtag + ;; + kept) + git rev-parse --verify refs/tags/newtag + ;; esac ) ' } -test_configured_prune unset unset "" kept -test_configured_prune unset unset "--no-prune" kept -test_configured_prune unset unset "--prune" pruned - -test_configured_prune false unset "" kept -test_configured_prune false unset "--no-prune" kept -test_configured_prune false unset "--prune" pruned - -test_configured_prune true unset "" pruned -test_configured_prune true unset "--prune" pruned -test_configured_prune true unset "--no-prune" kept - -test_configured_prune unset false "" kept -test_configured_prune unset false "--no-prune" kept -test_configured_prune unset false "--prune" pruned - -test_configured_prune false false "" kept -test_configured_prune false false "--no-prune" kept -test_configured_prune false false "--prune" pruned - -test_configured_prune true false "" kept -test_configured_prune true false "--prune" pruned -test_configured_prune true false "--no-prune" kept - -test_configured_prune unset true "" pruned -test_configured_prune unset true "--no-prune" kept -test_configured_prune unset true "--prune" pruned - -test_configured_prune false true "" pruned -test_configured_prune false true "--no-prune" kept -test_configured_prune false true "--prune" pruned - -test_configured_prune true true "" pruned -test_configured_prune true true "--prune" pruned -test_configured_prune true true "--no-prune" kept +# $1 config: fetch.prune +# $2 config: remote.<name>.prune +# $3 config: fetch.pruneTags +# $4 config: remote.<name>.pruneTags +# $5 expect: branch to be pruned? +# $6 expect: tag to be pruned? +# $7 git-fetch $cmdline: +# +# $1 $2 $3 $4 $5 $6 $7 +test_configured_prune unset unset unset unset kept kept "" +test_configured_prune unset unset unset unset kept kept "--no-prune" +test_configured_prune unset unset unset unset pruned kept "--prune" +test_configured_prune unset unset unset unset kept pruned \ + "--prune origin refs/tags/*:refs/tags/*" +test_configured_prune unset unset unset unset pruned pruned \ + "--prune origin refs/tags/*:refs/tags/* +refs/heads/*:refs/remotes/origin/*" + +test_configured_prune false unset unset unset kept kept "" +test_configured_prune false unset unset unset kept kept "--no-prune" +test_configured_prune false unset unset unset pruned kept "--prune" + +test_configured_prune true unset unset unset pruned kept "" +test_configured_prune true unset unset unset pruned kept "--prune" +test_configured_prune true unset unset unset kept kept "--no-prune" + +test_configured_prune unset false unset unset kept kept "" +test_configured_prune unset false unset unset kept kept "--no-prune" +test_configured_prune unset false unset unset pruned kept "--prune" + +test_configured_prune false false unset unset kept kept "" +test_configured_prune false false unset unset kept kept "--no-prune" +test_configured_prune false false unset unset pruned kept "--prune" +test_configured_prune false false unset unset kept pruned \ + "--prune origin refs/tags/*:refs/tags/*" +test_configured_prune false false unset unset pruned pruned \ + "--prune origin refs/tags/*:refs/tags/* +refs/heads/*:refs/remotes/origin/*" + +test_configured_prune true false unset unset kept kept "" +test_configured_prune true false unset unset pruned kept "--prune" +test_configured_prune true false unset unset kept kept "--no-prune" + +test_configured_prune unset true unset unset pruned kept "" +test_configured_prune unset true unset unset kept kept "--no-prune" +test_configured_prune unset true unset unset pruned kept "--prune" + +test_configured_prune false true unset unset pruned kept "" +test_configured_prune false true unset unset kept kept "--no-prune" +test_configured_prune false true unset unset pruned kept "--prune" + +test_configured_prune true true unset unset pruned kept "" +test_configured_prune true true unset unset pruned kept "--prune" +test_configured_prune true true unset unset kept kept "--no-prune" +test_configured_prune true true unset unset kept pruned \ + "--prune origin refs/tags/*:refs/tags/*" +test_configured_prune true true unset unset pruned pruned \ + "--prune origin refs/tags/*:refs/tags/* +refs/heads/*:refs/remotes/origin/*" + +# --prune-tags on its own does nothing, needs --prune as well, same +# for for fetch.pruneTags without fetch.prune +test_configured_prune unset unset unset unset kept kept "--prune-tags" +test_configured_prune unset unset true unset kept kept "" +test_configured_prune unset unset unset true kept kept "" + +# These will prune the tags +test_configured_prune unset unset unset unset pruned pruned "--prune --prune-tags" +test_configured_prune true unset true unset pruned pruned "" +test_configured_prune unset true unset true pruned pruned "" + +# remote.<name>.pruneTags overrides fetch.pruneTags, just like +# remote.<name>.prune overrides fetch.prune if set. +test_configured_prune true unset true unset pruned pruned "" +test_configured_prune false true false true pruned pruned "" +test_configured_prune true false true false kept kept "" + +# When --prune-tags is supplied it's ignored if an explicit refspec is +# given, same for the configuration options. +test_configured_prune unset unset unset unset pruned kept \ + "--prune --prune-tags origin +refs/heads/*:refs/remotes/origin/*" +test_configured_prune unset unset true unset pruned kept \ + "--prune origin +refs/heads/*:refs/remotes/origin/*" +test_configured_prune unset unset unset true pruned kept \ + "--prune origin +refs/heads/*:refs/remotes/origin/*" + +# Pruning that also takes place if a file:// url replaces a named +# remote. However, because there's no implicit +# +refs/heads/*:refs/remotes/origin/* refspec and supplying it on the +# command-line negates --prune-tags, the branches will not be pruned. +test_configured_prune_type unset unset unset unset kept kept "origin --prune-tags" "name" +test_configured_prune_type unset unset unset unset kept kept "origin --prune-tags" "link" +test_configured_prune_type unset unset unset unset pruned pruned "origin --prune --prune-tags" "name" +test_configured_prune_type unset unset unset unset kept pruned "origin --prune --prune-tags" "link" +test_configured_prune_type unset unset unset unset pruned pruned "--prune --prune-tags origin" "name" +test_configured_prune_type unset unset unset unset kept pruned "--prune --prune-tags origin" "link" +test_configured_prune_type unset unset true unset pruned pruned "--prune origin" "name" +test_configured_prune_type unset unset true unset kept pruned "--prune origin" "link" +test_configured_prune_type unset unset unset true pruned pruned "--prune origin" "name" +test_configured_prune_type unset unset unset true kept pruned "--prune origin" "link" +test_configured_prune_type true unset true unset pruned pruned "origin" "name" +test_configured_prune_type true unset true unset kept pruned "origin" "link" +test_configured_prune_type unset true true unset pruned pruned "origin" "name" +test_configured_prune_type unset true true unset kept pruned "origin" "link" +test_configured_prune_type unset true unset true pruned pruned "origin" "name" +test_configured_prune_type unset true unset true kept pruned "origin" "link" + +# When all remote.origin.fetch settings are deleted a --prune +# --prune-tags still implicitly supplies refs/tags/*:refs/tags/* so +# tags, but not tracking branches, will be deleted. +test_expect_success 'remove remote.origin.fetch "one"' ' + ( + cd one && + git config --unset-all remote.origin.fetch + ) +' +test_configured_prune_type unset unset unset unset kept pruned "origin --prune --prune-tags" "name" +test_configured_prune_type unset unset unset unset kept pruned "origin --prune --prune-tags" "link" test_expect_success 'all boundary commits are excluded' ' test_commit base && @@ -693,8 +840,8 @@ test_expect_success C_LOCALE_OUTPUT 'fetch aligned output' ' test_commit looooooooooooong-tag && ( cd full-output && - git -c fetch.output=full fetch origin 2>&1 | \ - grep -e "->" | cut -c 22- >../actual + git -c fetch.output=full fetch origin >actual 2>&1 && + grep -e "->" actual | cut -c 22- >../actual ) && cat >expect <<-\EOF && master -> origin/master @@ -708,8 +855,8 @@ test_expect_success C_LOCALE_OUTPUT 'fetch compact output' ' test_commit extraaa && ( cd compact && - git -c fetch.output=compact fetch origin 2>&1 | \ - grep -e "->" | cut -c 22- >../actual + git -c fetch.output=compact fetch origin >actual 2>&1 && + grep -e "->" actual | cut -c 22- >../actual ) && cat >expect <<-\EOF && master -> origin/* diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 02106c9226..6a949484d0 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -10,6 +10,9 @@ test_expect_success setup ' test_tick && git commit -m initial && git tag mark && + git tag mark1.1 && + git tag mark1.2 && + git tag mark1.10 && git show-ref --tags -d | sed -e "s/ / /" >expected.tag && ( echo "$(git rev-parse HEAD) HEAD" @@ -39,6 +42,39 @@ test_expect_success 'ls-remote self' ' test_cmp expected.all actual ' +test_expect_success 'ls-remote --sort="version:refname" --tags self' ' + cat >expect <<-EOF && + $(git rev-parse mark) refs/tags/mark + $(git rev-parse mark1.1) refs/tags/mark1.1 + $(git rev-parse mark1.2) refs/tags/mark1.2 + $(git rev-parse mark1.10) refs/tags/mark1.10 + EOF + git ls-remote --sort="version:refname" --tags self >actual && + test_cmp expect actual +' + +test_expect_success 'ls-remote --sort="-version:refname" --tags self' ' + cat >expect <<-EOF && + $(git rev-parse mark1.10) refs/tags/mark1.10 + $(git rev-parse mark1.2) refs/tags/mark1.2 + $(git rev-parse mark1.1) refs/tags/mark1.1 + $(git rev-parse mark) refs/tags/mark + EOF + git ls-remote --sort="-version:refname" --tags self >actual && + test_cmp expect actual +' + +test_expect_success 'ls-remote --sort="-refname" --tags self' ' + cat >expect <<-EOF && + $(git rev-parse mark1.2) refs/tags/mark1.2 + $(git rev-parse mark1.10) refs/tags/mark1.10 + $(git rev-parse mark1.1) refs/tags/mark1.1 + $(git rev-parse mark) refs/tags/mark + EOF + git ls-remote --sort="-refname" --tags self >actual && + test_cmp expect actual +' + test_expect_success 'dies when no remote specified and no default remotes found' ' test_must_fail git ls-remote ' @@ -131,7 +167,7 @@ test_expect_success 'Report no-match with --exit-code' ' test_expect_success 'Report match with --exit-code' ' git ls-remote --exit-code other.git "refs/tags/*" >actual && - git ls-remote . tags/mark >expect && + git ls-remote . tags/mark* >expect && test_cmp expect actual ' @@ -171,13 +207,17 @@ test_expect_success 'overrides work between mixed transfer/upload-pack hideRefs' ' test_expect_success 'ls-remote --symref' ' - cat >expect <<-\EOF && + git fetch origin && + cat >expect <<-EOF && ref: refs/heads/master HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/remotes/origin/HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/remotes/origin/master - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/tags/mark + $(git rev-parse HEAD) HEAD + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse HEAD) refs/remotes/origin/HEAD + $(git rev-parse refs/remotes/origin/master) refs/remotes/origin/master + $(git rev-parse refs/tags/mark) refs/tags/mark + $(git rev-parse refs/tags/mark1.1) refs/tags/mark1.1 + $(git rev-parse refs/tags/mark1.10) refs/tags/mark1.10 + $(git rev-parse refs/tags/mark1.2) refs/tags/mark1.2 EOF git ls-remote --symref >actual && test_cmp expect actual diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 177897ea0b..3e8940eee5 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -94,6 +94,9 @@ mk_child() { } check_push_result () { + test $# -ge 3 || + error "bug in the test script: check_push_result requires at least 3 parameters" + repo_name="$1" shift @@ -553,10 +556,7 @@ test_expect_success 'branch.*.pushremote config order is irrelevant' ' test_expect_success 'push with dry-run' ' mk_test testrepo heads/master && - ( - cd testrepo && - old_commit=$(git show-ref -s --verify refs/heads/master) - ) && + old_commit=$(git -C testrepo show-ref -s --verify refs/heads/master) && git push --dry-run testrepo : && check_push_result testrepo $old_commit heads/master ' @@ -612,7 +612,7 @@ test_expect_success 'push does not update local refs on failure' ' chmod +x testrepo/.git/hooks/pre-receive && ( cd child && - git pull .. master + git pull .. master && test_must_fail git push && test $(git rev-parse master) != \ $(git rev-parse remotes/origin/master) @@ -1418,7 +1418,7 @@ test_expect_success 'receive.denyCurrentBranch = updateInstead' ' cd testrepo && git reset --hard HEAD^ && test $(git -C .. rev-parse HEAD^) = $(git rev-parse HEAD) && - test-chmtime +100 path1 + test-tool chmtime +100 path1 ) && git push testrepo master && ( diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index f15f7a3329..59c4b778d3 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -305,7 +305,7 @@ test_expect_success '--rebase with conflicts shows advice' ' test_tick && git commit -m "Create conflict" seq.txt && test_must_fail git pull --rebase . seq 2>err >out && - test_i18ngrep "When you have resolved this problem" out + test_i18ngrep "Resolve all conflicts manually" out ' test_expect_success 'failed --rebase shows advice' ' @@ -319,7 +319,7 @@ test_expect_success 'failed --rebase shows advice' ' git checkout -f -b fails-to-rebase HEAD^ && test_commit v2-without-cr file "2" file2-lf && test_must_fail git pull --rebase . diverging 2>err >out && - test_i18ngrep "When you have resolved this problem" out + test_i18ngrep "Resolve all conflicts manually" out ' test_expect_success '--rebase fails with multiple branches' ' diff --git a/t/t5521-pull-options.sh b/t/t5521-pull-options.sh index ded8f98dbe..c19d8dbc9d 100755 --- a/t/t5521-pull-options.sh +++ b/t/t5521-pull-options.sh @@ -165,4 +165,49 @@ test_expect_success 'git pull --allow-unrelated-histories' ' ) ' +test_expect_success 'git pull does not add a sign-off line' ' + test_when_finished "rm -fr src dst actual" && + git init src && + test_commit -C src one && + git clone src dst && + test_commit -C src two && + git -C dst pull --no-ff && + git -C dst show -s --pretty="format:%(trailers)" HEAD >actual && + test_must_be_empty actual +' + +test_expect_success 'git pull --no-signoff does not add sign-off line' ' + test_when_finished "rm -fr src dst actual" && + git init src && + test_commit -C src one && + git clone src dst && + test_commit -C src two && + git -C dst pull --no-signoff --no-ff && + git -C dst show -s --pretty="format:%(trailers)" HEAD >actual && + test_must_be_empty actual +' + +test_expect_success 'git pull --signoff add a sign-off line' ' + test_when_finished "rm -fr src dst expected actual" && + echo "Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" >expected && + git init src && + test_commit -C src one && + git clone src dst && + test_commit -C src two && + git -C dst pull --signoff --no-ff && + git -C dst show -s --pretty="format:%(trailers)" HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'git pull --no-signoff flag cancels --signoff flag' ' + test_when_finished "rm -fr src dst actual" && + git init src && + test_commit -C src one && + git clone src dst && + test_commit -C src two && + git -C dst pull --signoff --no-signoff --no-ff && + git -C dst show -s --pretty="format:%(trailers)" HEAD >actual && + test_must_be_empty actual +' + test_done diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index 42251f7f3a..9cc4b569c0 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -85,7 +85,7 @@ test_expect_success "fetch --recurse-submodules -j2 has the same output behaviou add_upstream_commit && ( cd downstream && - GIT_TRACE=$(pwd)/../trace.out git fetch --recurse-submodules -j2 2>../actual.err + GIT_TRACE="$TRASH_DIRECTORY/trace.out" git fetch --recurse-submodules -j2 2>../actual.err ) && test_must_be_empty actual.out && test_i18ncmp expect.err actual.err && @@ -478,7 +478,47 @@ test_expect_success "don't fetch submodule when newly recorded commits are alrea git fetch >../actual.out 2>../actual.err ) && ! test -s actual.out && - test_i18ncmp expect.err actual.err + test_i18ncmp expect.err actual.err && + ( + cd submodule && + git checkout -q master + ) +' + +test_expect_success "'fetch.recurseSubmodules=on-demand' works also without .gitmodules entry" ' + ( + cd downstream && + git fetch --recurse-submodules + ) && + add_upstream_commit && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git rm .gitmodules && + git commit -m "new submodule without .gitmodules" && + printf "" >expect.out && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." >expect.err.2 && + echo " $head1..$head2 master -> origin/master" >>expect.err.2 && + head -3 expect.err >>expect.err.2 && + ( + cd downstream && + rm .gitmodules && + git config fetch.recurseSubmodules on-demand && + # fake submodule configuration to avoid skipping submodule handling + git config -f .gitmodules submodule.fake.path fake && + git config -f .gitmodules submodule.fake.url fakeurl && + git add .gitmodules && + git config --unset submodule.submodule.url && + git fetch >../actual.out 2>../actual.err && + # cleanup + git config --unset fetch.recurseSubmodules && + git reset --hard + ) && + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err.2 actual.err && + git checkout HEAD^ -- .gitmodules && + git add .gitmodules && + git commit -m "new submodule restored .gitmodules" ' test_expect_success 'fetching submodules respects parallel settings' ' @@ -530,4 +570,39 @@ test_expect_success 'fetching submodule into a broken repository' ' test_must_fail git -C dst fetch --recurse-submodules ' +test_expect_success "fetch new commits when submodule got renamed" ' + git clone . downstream_rename && + ( + cd downstream_rename && + git submodule update --init && +# NEEDSWORK: we omitted --recursive for the submodule update here since +# that does not work. See test 7001 for mv "moving nested submodules" +# for details. Once that is fixed we should add the --recursive option +# here. + git checkout -b rename && + git mv submodule submodule_renamed && + ( + cd submodule_renamed && + git checkout -b rename_sub && + echo a >a && + git add a && + git commit -ma && + git push origin rename_sub && + git rev-parse HEAD >../../expect + ) && + git add submodule_renamed && + git commit -m "update renamed submodule" && + git push origin rename + ) && + ( + cd downstream && + git fetch --recurse-submodules=on-demand && + ( + cd submodule && + git rev-parse origin/rename_sub >../../actual + ) + ) && + test_cmp expect actual +' + test_done diff --git a/t/t5531-deep-submodule-push.sh b/t/t5531-deep-submodule-push.sh index 0f84a53146..39cb2c1c34 100755 --- a/t/t5531-deep-submodule-push.sh +++ b/t/t5531-deep-submodule-push.sh @@ -298,6 +298,16 @@ test_expect_success 'push succeeds if submodule commit disabling recursion from ) ' +test_expect_success 'submodule entry pointing at a tag is error' ' + git -C work/gar/bage tag -a test1 -m "tag" && + tag=$(git -C work/gar/bage rev-parse test1^{tag}) && + git -C work update-index --cacheinfo 160000 "$tag" gar/bage && + git -C work commit -m "bad commit" && + test_when_finished "git -C work reset --hard HEAD^" && + test_must_fail git -C work push --recurse-submodules=on-demand ../pub.git master 2>err && + test_i18ngrep "is a tag, not a commit" err +' + test_expect_success 'push fails if recurse submodules option passed as yes' ' ( cd work/gar/bage && diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh index 464ffdd147..1cea758f78 100755 --- a/t/t5534-push-signed.sh +++ b/t/t5534-push-signed.sh @@ -71,6 +71,13 @@ test_expect_success 'push --signed fails with a receiver without push certificat test_i18ngrep "the receiving end does not support" err ' +test_expect_success 'push --signed=1 is accepted' ' + prepare_dst && + mkdir -p dst/.git/hooks && + test_must_fail git push --signed=1 dst noop ff +noff 2>err && + test_i18ngrep "the receiving end does not support" err +' + test_expect_success GPG 'no certificate for a signed push with no update' ' prepare_dst && mkdir -p dst/.git/hooks && diff --git a/t/t5536-fetch-conflicts.sh b/t/t5536-fetch-conflicts.sh index 2e42cf3316..91f28c2f78 100755 --- a/t/t5536-fetch-conflicts.sh +++ b/t/t5536-fetch-conflicts.sh @@ -18,14 +18,6 @@ setup_repository () { ) } -verify_stderr () { - cat >expected && - # We're not interested in the error - # "fatal: The remote end hung up unexpectedly": - test_i18ngrep -E '^(fatal|warning):' <error | grep -v 'hung up' >actual | sort && - test_i18ncmp expected actual -} - test_expect_success 'setup' ' git commit --allow-empty -m "Initial" && git branch branch1 && @@ -48,9 +40,7 @@ test_expect_success 'fetch conflict: config vs. config' ' "+refs/heads/branch2:refs/remotes/origin/branch1" && ( cd ccc && test_must_fail git fetch origin 2>error && - verify_stderr <<-\EOF - fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1 - EOF + test_i18ngrep "fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1" error ) ' @@ -77,9 +67,7 @@ test_expect_success 'fetch conflict: arg vs. arg' ' test_must_fail git fetch origin \ refs/heads/*:refs/remotes/origin/* \ refs/heads/branch2:refs/remotes/origin/branch1 2>error && - verify_stderr <<-\EOF - fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1 - EOF + test_i18ngrep "fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1" error ) ' @@ -90,10 +78,8 @@ test_expect_success 'fetch conflict: criss-cross args' ' git fetch origin \ refs/heads/branch1:refs/remotes/origin/branch2 \ refs/heads/branch2:refs/remotes/origin/branch1 2>error && - verify_stderr <<-\EOF - warning: refs/remotes/origin/branch1 usually tracks refs/heads/branch1, not refs/heads/branch2 - warning: refs/remotes/origin/branch2 usually tracks refs/heads/branch2, not refs/heads/branch1 - EOF + test_i18ngrep "warning: refs/remotes/origin/branch1 usually tracks refs/heads/branch1, not refs/heads/branch2" error && + test_i18ngrep "warning: refs/remotes/origin/branch2 usually tracks refs/heads/branch2, not refs/heads/branch1" error ) ' diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index d38bf32470..a2af693068 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -234,7 +234,7 @@ test_expect_success TTY 'push --no-progress silences progress but not status' ' test_commit no-progress && test_terminal git push --no-progress >output 2>&1 && test_i18ngrep "^To http" output && - test_i18ngrep ! "^Writing objects" + test_i18ngrep ! "^Writing objects" output ' test_expect_success 'push --progress shows progress to non-tty' ' @@ -377,5 +377,17 @@ test_expect_success 'push status output scrubs password' ' grep "^To $HTTPD_URL/smart/test_repo.git" status ' +test_expect_success 'colorize errors/hints' ' + cd "$ROOT_PATH"/test_repo_clone && + test_must_fail git -c color.transport=always -c color.advice=always \ + -c color.push=always \ + push origin origin/master^:master 2>act && + test_decode_color <act >decoded && + test_i18ngrep "<RED>.*rejected.*<RESET>" decoded && + test_i18ngrep "<RED>error: failed to push some refs" decoded && + test_i18ngrep "<YELLOW>hint: " decoded && + test_i18ngrep ! "^hint: " decoded +' + stop_httpd test_done diff --git a/t/t5545-push-options.sh b/t/t5545-push-options.sh index 90a4b0d2fe..b47a95871c 100755 --- a/t/t5545-push-options.sh +++ b/t/t5545-push-options.sh @@ -140,17 +140,109 @@ test_expect_success 'push options and submodules' ' test_cmp expect parent_upstream/.git/hooks/post-receive.push_options ' +test_expect_success 'default push option' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + git -c push.pushOption=default push up master + ) && + test_refs master master && + echo "default" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options && + test_cmp expect upstream/.git/hooks/post-receive.push_options +' + +test_expect_success 'two default push options' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + git -c push.pushOption=default1 -c push.pushOption=default2 push up master + ) && + test_refs master master && + printf "default1\ndefault2\n" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options && + test_cmp expect upstream/.git/hooks/post-receive.push_options +' + +test_expect_success 'push option from command line overrides from-config push option' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + git -c push.pushOption=default push --push-option=manual up master + ) && + test_refs master master && + echo "manual" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options && + test_cmp expect upstream/.git/hooks/post-receive.push_options +' + +test_expect_success 'empty value of push.pushOption in config clears the list' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + git -c push.pushOption=default1 -c push.pushOption= -c push.pushOption=default2 push up master + ) && + test_refs master master && + echo "default2" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options && + test_cmp expect upstream/.git/hooks/post-receive.push_options +' + +test_expect_success 'invalid push option in config' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + ( + cd workbench && + test_commit one && + git push --mirror up && + test_commit two && + test_must_fail git -c push.pushOption push up master + ) && + test_refs master HEAD@{1} +' + +test_expect_success 'push options keep quoted characters intact (direct)' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + test_commit -C workbench one && + git -C workbench push --push-option="\"embedded quotes\"" up master && + echo "\"embedded quotes\"" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd -test_expect_success 'push option denied properly by http server' ' +# set up http repository for fetching/pushing, with push options config +# bool set to $1 +mk_http_pair () { test_when_finished "rm -rf test_http_clone" && - test_when_finished "rm -rf \"$HTTPD_DOCUMENT_ROOT_PATH\"/upstream.git" && + test_when_finished 'rm -rf "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git' && mk_repo_pair && - git -C upstream config receive.advertisePushOptions false && + git -C upstream config receive.advertisePushOptions "$1" && git -C upstream config http.receivepack true && cp -R upstream/.git "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git && - git clone "$HTTPD_URL"/smart/upstream test_http_clone && + git clone "$HTTPD_URL"/smart/upstream test_http_clone +} + +test_expect_success 'push option denied properly by http server' ' + mk_http_pair false && test_commit -C test_http_clone one && test_must_fail git -C test_http_clone push --push-option=asdf origin master 2>actual && test_i18ngrep "the receiving end does not support push options" actual && @@ -158,13 +250,7 @@ test_expect_success 'push option denied properly by http server' ' ' test_expect_success 'push options work properly across http' ' - test_when_finished "rm -rf test_http_clone" && - test_when_finished "rm -rf \"$HTTPD_DOCUMENT_ROOT_PATH\"/upstream.git" && - mk_repo_pair && - git -C upstream config receive.advertisePushOptions true && - git -C upstream config http.receivepack true && - cp -R upstream/.git "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git && - git clone "$HTTPD_URL"/smart/upstream test_http_clone && + mk_http_pair true && test_commit -C test_http_clone one && git -C test_http_clone push origin master && @@ -183,6 +269,15 @@ test_expect_success 'push options work properly across http' ' test_cmp expect actual ' +test_expect_success 'push options keep quoted characters intact (http)' ' + mk_http_pair true && + + test_commit -C test_http_clone one && + git -C test_http_clone push --push-option="\"embedded quotes\"" origin master && + echo "\"embedded quotes\"" >expect && + test_cmp expect "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git/hooks/pre-receive.push_options +' + stop_httpd test_done diff --git a/t/t5546-receive-limits.sh b/t/t5546-receive-limits.sh index 10cb0be2b7..0b0e987fdb 100755 --- a/t/t5546-receive-limits.sh +++ b/t/t5546-receive-limits.sh @@ -44,7 +44,7 @@ test_pack_input_limit () { } test_expect_success "create known-size (1024 bytes) commit" ' - test-genrandom foo 1024 >one-k && + test-tool genrandom foo 1024 >one-k && git add one-k && test_commit one-k ' diff --git a/t/t5547-push-quarantine.sh b/t/t5547-push-quarantine.sh index 113c87007f..faaa51ccc5 100755 --- a/t/t5547-push-quarantine.sh +++ b/t/t5547-push-quarantine.sh @@ -39,7 +39,7 @@ test_expect_success 'push to repo path with path separator (colon)' ' # so make it likely for us to generate a delta by having # a non-trivial file with multiple versions. - test-genrandom foo 4096 >file.bin && + test-tool genrandom foo 4096 >file.bin && git add file.bin && git commit -m bin && diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index 8552184e74..6d7d88ccc9 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -169,6 +169,17 @@ test_expect_success 'fetch changes via manual http-fetch' ' test_cmp file clone2/file ' +test_expect_success 'manual http-fetch without -a works just as well' ' + cp -R clone-tmpl clone3 && + + HEAD=$(git rev-parse --verify HEAD) && + (cd clone3 && + git http-fetch -w heads/master-new $HEAD $(git config remote.origin.url) && + git checkout master-new && + test $HEAD = $(git rev-parse --verify HEAD)) && + test_cmp file clone3/file +' + test_expect_success 'http remote detects correct HEAD' ' git push public master:other && (cd clone && diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index a51b7e20d3..f5721b4a59 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -364,5 +364,38 @@ test_expect_success 'custom http headers' ' submodule update sub ' +test_expect_success 'GIT_REDACT_COOKIES redacts cookies' ' + rm -rf clone && + echo "Set-Cookie: Foo=1" >cookies && + echo "Set-Cookie: Bar=2" >>cookies && + GIT_TRACE_CURL=true GIT_REDACT_COOKIES=Bar,Baz \ + git -c "http.cookieFile=$(pwd)/cookies" clone \ + $HTTPD_URL/smart/repo.git clone 2>err && + grep "Cookie:.*Foo=1" err && + grep "Cookie:.*Bar=<redacted>" err && + ! grep "Cookie:.*Bar=2" err +' + +test_expect_success 'GIT_REDACT_COOKIES handles empty values' ' + rm -rf clone && + echo "Set-Cookie: Foo=" >cookies && + GIT_TRACE_CURL=true GIT_REDACT_COOKIES=Foo \ + git -c "http.cookieFile=$(pwd)/cookies" clone \ + $HTTPD_URL/smart/repo.git clone 2>err && + grep "Cookie:.*Foo=<redacted>" err +' + +test_expect_success 'GIT_TRACE_CURL_NO_DATA prevents data from being traced' ' + rm -rf clone && + GIT_TRACE_CURL=true \ + git clone $HTTPD_URL/smart/repo.git clone 2>err && + grep "=> Send data" err && + + rm -rf clone && + GIT_TRACE_CURL=true GIT_TRACE_CURL_NO_DATA=1 \ + git clone $HTTPD_URL/smart/repo.git clone 2>err && + ! grep "=> Send data" err +' + stop_httpd test_done diff --git a/t/t5561-http-backend.sh b/t/t5561-http-backend.sh index 90e0d6f0fe..84a955770a 100755 --- a/t/t5561-http-backend.sh +++ b/t/t5561-http-backend.sh @@ -3,10 +3,16 @@ test_description='test git-http-backend' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-httpd.sh + +if ! test_have_prereq CURL; then + skip_all='skipping raw http-backend tests, curl not available' + test_done +fi + start_httpd GET() { - curl --include "$HTTPD_URL/$SMART/repo.git/$1" >out 2>/dev/null && + curl --include "$HTTPD_URL/$SMART/repo.git/$1" >out && tr '\015' Q <out | sed ' s/Q$// @@ -19,7 +25,7 @@ GET() { POST() { curl --include --data "$2" \ --header "Content-Type: application/x-$1-request" \ - "$HTTPD_URL/smart/repo.git/$1" >out 2>/dev/null && + "$HTTPD_URL/smart/repo.git/$1" >out && tr '\015' Q <out | sed ' s/Q$// diff --git a/t/t5570-git-daemon.sh b/t/t5570-git-daemon.sh index 225a022e8a..0d4c52016b 100755 --- a/t/t5570-git-daemon.sh +++ b/t/t5570-git-daemon.sh @@ -50,7 +50,7 @@ test_expect_success 'no-op fetch -v stderr is as expected' ' ' test_expect_success 'no-op fetch without "-v" is quiet' ' - (cd clone && git fetch) 2>stderr && + (cd clone && git fetch 2>../stderr) && ! test -s stderr ' @@ -167,23 +167,48 @@ test_expect_success 'access repo via interpolated hostname' ' git init --bare "$repo" && git push "$repo" HEAD && >"$repo"/git-daemon-export-ok && - rm -rf tmp.git && GIT_OVERRIDE_VIRTUAL_HOST=localhost \ - git clone --bare "$GIT_DAEMON_URL/interp.git" tmp.git && - rm -rf tmp.git && + git ls-remote "$GIT_DAEMON_URL/interp.git" && GIT_OVERRIDE_VIRTUAL_HOST=LOCALHOST \ - git clone --bare "$GIT_DAEMON_URL/interp.git" tmp.git + git ls-remote "$GIT_DAEMON_URL/interp.git" ' test_expect_success 'hostname cannot break out of directory' ' - rm -rf tmp.git && repo="$GIT_DAEMON_DOCUMENT_ROOT_PATH/../escape.git" && git init --bare "$repo" && git push "$repo" HEAD && >"$repo"/git-daemon-export-ok && test_must_fail \ env GIT_OVERRIDE_VIRTUAL_HOST=.. \ - git clone --bare "$GIT_DAEMON_URL/escape.git" tmp.git + git ls-remote "$GIT_DAEMON_URL/escape.git" +' + +test_expect_success 'daemon log records all attributes' ' + cat >expect <<-\EOF && + Extended attribute "host": localhost + Extended attribute "protocol": version=1 + EOF + >daemon.log && + GIT_OVERRIDE_VIRTUAL_HOST=localhost \ + git -c protocol.version=1 \ + ls-remote "$GIT_DAEMON_URL/interp.git" && + grep -i extended.attribute daemon.log | cut -d" " -f2- >actual && + test_cmp expect actual +' + +test_expect_success FAKENC 'hostname interpolation works after LF-stripping' ' + { + printf "git-upload-pack /interp.git\n\0host=localhost" | packetize + printf "0000" + } >input && + fake_nc "$GIT_DAEMON_HOST_PORT" <input >output && + depacketize <output >output.raw && + + # just pick out the value of master, which avoids any protocol + # particulars + perl -lne "print \$1 if m{^(\\S+) refs/heads/master}" <output.raw >actual && + git -C "$repo" rev-parse master >expect && + test_cmp expect actual ' stop_git_daemon diff --git a/t/t5572-pull-submodule.sh b/t/t5572-pull-submodule.sh index 077eb07e11..321bd37deb 100755 --- a/t/t5572-pull-submodule.sh +++ b/t/t5572-pull-submodule.sh @@ -65,6 +65,38 @@ test_expect_success 'recursive pull updates working tree' ' test_path_is_file super/sub/merge_strategy.t ' +test_expect_success "submodule.recurse option triggers recursive pull" ' + test_commit -C child merge_strategy_2 && + git -C parent submodule update --remote && + git -C parent add sub && + git -C parent commit -m "update submodule" && + + git -C super -c submodule.recurse pull --no-rebase && + test_path_is_file super/sub/merge_strategy_2.t +' + +test_expect_success " --[no-]recurse-submodule and submodule.recurse" ' + test_commit -C child merge_strategy_3 && + git -C parent submodule update --remote && + git -C parent add sub && + git -C parent commit -m "update submodule" && + + git -C super -c submodule.recurse pull --no-recurse-submodules --no-rebase && + test_path_is_missing super/sub/merge_strategy_3.t && + git -C super -c submodule.recurse=false pull --recurse-submodules --no-rebase && + test_path_is_file super/sub/merge_strategy_3.t && + + test_commit -C child merge_strategy_4 && + git -C parent submodule update --remote && + git -C parent add sub && + git -C parent commit -m "update submodule" && + + git -C super -c submodule.recurse=false pull --no-recurse-submodules --no-rebase && + test_path_is_missing super/sub/merge_strategy_4.t && + git -C super -c submodule.recurse=true pull --recurse-submodules --no-rebase && + test_path_is_file super/sub/merge_strategy_4.t +' + test_expect_success 'recursive rebasing pull' ' # change upstream test_commit -C child rebase_strategy && diff --git a/t/t5573-pull-verify-signatures.sh b/t/t5573-pull-verify-signatures.sh new file mode 100755 index 0000000000..9594e891f4 --- /dev/null +++ b/t/t5573-pull-verify-signatures.sh @@ -0,0 +1,81 @@ +#!/bin/sh + +test_description='pull signature verification tests' +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-gpg.sh" + +test_expect_success GPG 'create repositories with signed commits' ' + echo 1 >a && git add a && + test_tick && git commit -m initial && + git tag initial && + + git clone . signed && + ( + cd signed && + echo 2 >b && git add b && + test_tick && git commit -S -m "signed" + ) && + + git clone . unsigned && + ( + cd unsigned && + echo 3 >c && git add c && + test_tick && git commit -m "unsigned" + ) && + + git clone . bad && + ( + cd bad && + echo 4 >d && git add d && + test_tick && git commit -S -m "bad" && + git cat-file commit HEAD >raw && + sed -e "s/bad/forged bad/" raw >forged && + git hash-object -w -t commit forged >forged.commit && + git checkout $(cat forged.commit) + ) && + + git clone . untrusted && + ( + cd untrusted && + echo 5 >e && git add e && + test_tick && git commit -SB7227189 -m "untrusted" + ) +' + +test_expect_success GPG 'pull unsigned commit with --verify-signatures' ' + test_when_finished "git reset --hard && git checkout initial" && + test_must_fail git pull --ff-only --verify-signatures unsigned 2>pullerror && + test_i18ngrep "does not have a GPG signature" pullerror +' + +test_expect_success GPG 'pull commit with bad signature with --verify-signatures' ' + test_when_finished "git reset --hard && git checkout initial" && + test_must_fail git pull --ff-only --verify-signatures bad 2>pullerror && + test_i18ngrep "has a bad GPG signature" pullerror +' + +test_expect_success GPG 'pull commit with untrusted signature with --verify-signatures' ' + test_when_finished "git reset --hard && git checkout initial" && + test_must_fail git pull --ff-only --verify-signatures untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull signed commit with --verify-signatures' ' + test_when_finished "git reset --hard && git checkout initial" && + git pull --verify-signatures signed >pulloutput && + test_i18ngrep "has a good GPG signature" pulloutput +' + +test_expect_success GPG 'pull commit with bad signature without verification' ' + test_when_finished "git reset --hard && git checkout initial" && + git pull --ff-only bad 2>pullerror +' + +test_expect_success GPG 'pull commit with bad signature with --no-verify-signatures' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config merge.verifySignatures true && + test_config pull.verifySignatures true && + git pull --ff-only --no-verify-signatures bad 2>pullerror +' + +test_done diff --git a/t/t5580-clone-push-unc.sh b/t/t5580-clone-push-unc.sh index b322c2f722..ba548df4a9 100755 --- a/t/t5580-clone-push-unc.sh +++ b/t/t5580-clone-push-unc.sh @@ -3,12 +3,18 @@ test_description='various Windows-only path tests' . ./test-lib.sh -if ! test_have_prereq MINGW; then +if test_have_prereq CYGWIN +then + alias winpwd='cygpath -aw .' +elif test_have_prereq MINGW +then + alias winpwd=pwd +else skip_all='skipping Windows-only path tests' test_done fi -UNCPATH="$(pwd)" +UNCPATH="$(winpwd)" case "$UNCPATH" in [A-Z]:*) # Use administrative share e.g. \\localhost\C$\git-sdk-64\usr\src\git @@ -45,8 +51,8 @@ test_expect_success push ' test "$rev" = "$(git rev-parse --verify refs/heads/to-push)" ' -test_expect_success 'remote nick cannot contain backslashes' ' - BACKSLASHED="$(pwd | tr / \\\\)" && +test_expect_success MINGW 'remote nick cannot contain backslashes' ' + BACKSLASHED="$(winpwd | tr / \\\\)" && git ls-remote "$BACKSLASHED" >out 2>err && test_i18ngrep ! "unable to access" err ' diff --git a/t/t5600-clone-fail-cleanup.sh b/t/t5600-clone-fail-cleanup.sh index 4435693bb2..4a1a912e03 100755 --- a/t/t5600-clone-fail-cleanup.sh +++ b/t/t5600-clone-fail-cleanup.sh @@ -7,46 +7,94 @@ test_description='test git clone to cleanup after failure This test covers the fact that if git clone fails, it should remove the directory it created, to avoid the user having to manually -remove the directory before attempting a clone again.' +remove the directory before attempting a clone again. + +Unless the directory already exists, in which case we clean up only what we +wrote. +' . ./test-lib.sh -test_expect_success \ - 'clone of non-existent source should fail' \ - 'test_must_fail git clone foo bar' +corrupt_repo () { + test_when_finished "rmdir foo/.git/objects.bak" && + mkdir foo/.git/objects.bak/ && + test_when_finished "mv foo/.git/objects.bak/* foo/.git/objects/" && + mv foo/.git/objects/* foo/.git/objects.bak/ +} -test_expect_success \ - 'failed clone should not leave a directory' \ - '! test -d bar' +test_expect_success 'clone of non-existent source should fail' ' + test_must_fail git clone foo bar +' -# Need a repo to clone -test_create_repo foo +test_expect_success 'failed clone should not leave a directory' ' + test_path_is_missing bar +' -# clone doesn't like it if there is no HEAD. Is that a bug? -(cd foo && touch file && git add file && git commit -m 'add file' >/dev/null 2>&1) +test_expect_success 'create a repo to clone' ' + test_create_repo foo +' + +test_expect_success 'create objects in repo for later corruption' ' + test_commit -C foo file +' # source repository given to git clone should be relative to the # current path not to the target dir -test_expect_success \ - 'clone of non-existent (relative to $PWD) source should fail' \ - 'test_must_fail git clone ../foo baz' +test_expect_success 'clone of non-existent (relative to $PWD) source should fail' ' + test_must_fail git clone ../foo baz +' -test_expect_success \ - 'clone should work now that source exists' \ - 'git clone foo bar' +test_expect_success 'clone should work now that source exists' ' + git clone foo bar +' -test_expect_success \ - 'successful clone must leave the directory' \ - 'test -d bar' +test_expect_success 'successful clone must leave the directory' ' + test_path_is_dir bar +' test_expect_success 'failed clone --separate-git-dir should not leave any directories' ' - mkdir foo/.git/objects.bak/ && - mv foo/.git/objects/* foo/.git/objects.bak/ && + corrupt_repo && test_must_fail git clone --separate-git-dir gitdir foo worktree && - test_must_fail test -e gitdir && - test_must_fail test -e worktree && - mv foo/.git/objects.bak/* foo/.git/objects/ && - rmdir foo/.git/objects.bak + test_path_is_missing gitdir && + test_path_is_missing worktree +' + +test_expect_success 'failed clone into empty leaves directory (vanilla)' ' + mkdir -p empty && + corrupt_repo && + test_must_fail git clone foo empty && + test_dir_is_empty empty +' + +test_expect_success 'failed clone into empty leaves directory (bare)' ' + mkdir -p empty && + corrupt_repo && + test_must_fail git clone --bare foo empty && + test_dir_is_empty empty +' + +test_expect_success 'failed clone into empty leaves directory (separate)' ' + mkdir -p empty-git empty-wt && + corrupt_repo && + test_must_fail git clone --separate-git-dir empty-git foo empty-wt && + test_dir_is_empty empty-git && + test_dir_is_empty empty-wt +' + +test_expect_success 'failed clone into empty leaves directory (separate, git)' ' + mkdir -p empty-git && + corrupt_repo && + test_must_fail git clone --separate-git-dir empty-git foo no-wt && + test_dir_is_empty empty-git && + test_path_is_missing no-wt +' + +test_expect_success 'failed clone into empty leaves directory (separate, wt)' ' + mkdir -p empty-wt && + corrupt_repo && + test_must_fail git clone --separate-git-dir no-git foo empty-wt && + test_path_is_missing no-git && + test_dir_is_empty empty-wt ' test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 9c56f771b6..0b62037744 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -306,21 +306,21 @@ test_expect_success 'clone checking out a tag' ' test_cmp fetch.expected fetch.actual ' -setup_ssh_wrapper () { - test_expect_success 'setup ssh wrapper' ' - cp "$GIT_BUILD_DIR/t/helper/test-fake-ssh$X" \ - "$TRASH_DIRECTORY/ssh-wrapper$X" && - GIT_SSH="$TRASH_DIRECTORY/ssh-wrapper$X" && - export GIT_SSH && - export TRASH_DIRECTORY && - >"$TRASH_DIRECTORY"/ssh-output - ' -} +test_expect_success 'set up ssh wrapper' ' + cp "$GIT_BUILD_DIR/t/helper/test-fake-ssh$X" \ + "$TRASH_DIRECTORY/ssh$X" && + GIT_SSH="$TRASH_DIRECTORY/ssh$X" && + export GIT_SSH && + export TRASH_DIRECTORY && + >"$TRASH_DIRECTORY"/ssh-output +' copy_ssh_wrapper_as () { - cp "$TRASH_DIRECTORY/ssh-wrapper$X" "${1%$X}$X" && + rm -f "${1%$X}$X" && + cp "$TRASH_DIRECTORY/ssh$X" "${1%$X}$X" && + test_when_finished "rm $(git rev-parse --sq-quote "${1%$X}$X")" && GIT_SSH="${1%$X}$X" && - export GIT_SSH + test_when_finished "GIT_SSH=\"\$TRASH_DIRECTORY/ssh\$X\"" } expect_ssh () { @@ -344,8 +344,6 @@ expect_ssh () { (cd "$TRASH_DIRECTORY" && test_cmp ssh-expect ssh-output) } -setup_ssh_wrapper - test_expect_success 'clone myhost:src uses ssh' ' git clone myhost:src ssh-clone && expect_ssh myhost src @@ -362,9 +360,52 @@ test_expect_success 'bracketed hostnames are still ssh' ' expect_ssh "-p 123" myhost src ' -test_expect_success 'uplink is not treated as putty' ' +test_expect_success 'OpenSSH variant passes -4' ' + git clone -4 "[myhost:123]:src" ssh-ipv4-clone && + expect_ssh "-4 -p 123" myhost src +' + +test_expect_success 'variant can be overridden' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/putty" && + git -c ssh.variant=putty clone -4 "[myhost:123]:src" ssh-putty-clone && + expect_ssh "-4 -P 123" myhost src +' + +test_expect_success 'variant=auto picks based on basename' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && + git -c ssh.variant=auto clone -4 "[myhost:123]:src" ssh-auto-clone && + expect_ssh "-4 -P 123" myhost src +' + +test_expect_success 'simple does not support -4/-6' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/simple" && + test_must_fail git clone -4 "myhost:src" ssh-4-clone-simple +' + +test_expect_success 'simple does not support port' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/simple" && + test_must_fail git clone "[myhost:123]:src" ssh-bracket-clone-simple +' + +test_expect_success 'uplink is treated as simple' ' copy_ssh_wrapper_as "$TRASH_DIRECTORY/uplink" && - git clone "[myhost:123]:src" ssh-bracket-clone-uplink && + test_must_fail git clone "[myhost:123]:src" ssh-bracket-clone-uplink && + git clone "myhost:src" ssh-clone-uplink && + expect_ssh myhost src +' + +test_expect_success 'OpenSSH-like uplink is treated as ssh' ' + write_script "$TRASH_DIRECTORY/uplink" <<-EOF && + if test "\$1" = "-G" + then + exit 0 + fi && + exec "\$TRASH_DIRECTORY/ssh$X" "\$@" + EOF + test_when_finished "rm -f \"\$TRASH_DIRECTORY/uplink\"" && + GIT_SSH="$TRASH_DIRECTORY/uplink" && + test_when_finished "GIT_SSH=\"\$TRASH_DIRECTORY/ssh\$X\"" && + git clone "[myhost:123]:src" ssh-bracket-clone-sshlike-uplink && expect_ssh "-p 123" myhost src ' @@ -416,12 +457,14 @@ test_expect_success 'ssh.variant overrides plink detection' ' ' test_expect_success 'GIT_SSH_VARIANT overrides plink detection to plink' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && GIT_SSH_VARIANT=plink \ git clone "[myhost:123]:src" ssh-bracket-clone-variant-3 && expect_ssh "-P 123" myhost src ' test_expect_success 'GIT_SSH_VARIANT overrides plink to tortoiseplink' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && GIT_SSH_VARIANT=tortoiseplink \ git clone "[myhost:123]:src" ssh-bracket-clone-variant-4 && expect_ssh "-batch -P 123" myhost src @@ -433,9 +476,6 @@ test_expect_success 'clean failure on broken quoting' ' git clone "[myhost:123]:src" sq-failure ' -# Reset the GIT_SSH environment variable for clone tests. -setup_ssh_wrapper - counter=0 # $1 url # $2 none|host @@ -571,4 +611,122 @@ test_expect_success 'GIT_TRACE_PACKFILE produces a usable pack' ' git -C replay.git index-pack -v --stdin <tmp.pack ' +hex2oct () { + perl -ne 'printf "\\%03o", hex for /../g' +} + +test_expect_success 'clone on case-insensitive fs' ' + git init icasefs && + ( + cd icasefs + o=$(git hash-object -w --stdin </dev/null | hex2oct) && + t=$(printf "100644 X\0${o}100644 x\0${o}" | + git hash-object -w -t tree --stdin) && + c=$(git commit-tree -m bogus $t) && + git update-ref refs/heads/bogus $c && + git clone -b bogus . bogus + ) +' + +partial_clone () { + SERVER="$1" && + URL="$2" && + + rm -rf "$SERVER" client && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" one && + HASH1=$(git hash-object "$SERVER/one.t") && + git -C "$SERVER" revert HEAD && + test_commit -C "$SERVER" two && + HASH2=$(git hash-object "$SERVER/two.t") && + test_config -C "$SERVER" uploadpack.allowfilter 1 && + test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 && + + git clone --filter=blob:limit=0 "$URL" client && + + git -C client fsck && + + # Ensure that unneeded blobs are not inadvertently fetched. + test_config -C client extensions.partialclone "not a remote" && + test_must_fail git -C client cat-file -e "$HASH1" && + + # But this blob was fetched, because clone performs an initial checkout + git -C client cat-file -e "$HASH2" +} + +test_expect_success 'partial clone' ' + partial_clone server "file://$(pwd)/server" +' + +test_expect_success 'partial clone: warn if server does not support object filtering' ' + rm -rf server client && + test_create_repo server && + test_commit -C server one && + + git clone --filter=blob:limit=0 "file://$(pwd)/server" client 2> err && + + test_i18ngrep "filtering not recognized by server" err +' + +test_expect_success 'batch missing blob request during checkout' ' + rm -rf server client && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + + git -C server commit -m x && + echo aa >server/a && + echo bb >server/b && + git -C server add a b && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + + git clone --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure that there is only one negotiation by checking that there is + # only "done" line sent. ("done" marks the end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client checkout HEAD^ && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_expect_success 'batch missing blob request does not inadvertently try to fetch gitlinks' ' + rm -rf server client && + + test_create_repo repo_for_submodule && + test_commit -C repo_for_submodule x && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + git -C server commit -m x && + + echo aa >server/a && + echo bb >server/b && + # Also add a gitlink pointing to an arbitrary repository + git -C server submodule add "$(pwd)/repo_for_submodule" c && + git -C server add a b c && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + + # Make sure that it succeeds + git clone --filter=blob:limit=0 "file://$(pwd)/server" client +' + +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'partial clone using HTTP' ' + partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" +' + +stop_httpd + test_done diff --git a/t/t5603-clone-dirname.sh b/t/t5603-clone-dirname.sh index d5af758129..13b5e5eb9b 100755 --- a/t/t5603-clone-dirname.sh +++ b/t/t5603-clone-dirname.sh @@ -11,7 +11,9 @@ test_expect_success 'setup ssh wrapper' ' git upload-pack "$TRASH_DIRECTORY" EOF GIT_SSH="$TRASH_DIRECTORY/ssh-wrapper" && + GIT_SSH_VARIANT=ssh && export GIT_SSH && + export GIT_SSH_VARIANT && export TRASH_DIRECTORY ' diff --git a/t/t5608-clone-2gb.sh b/t/t5608-clone-2gb.sh index 191d6d3a78..df822d9a3e 100755 --- a/t/t5608-clone-2gb.sh +++ b/t/t5608-clone-2gb.sh @@ -21,7 +21,7 @@ test_expect_success CLONE_2GB 'setup' ' do printf "Generating blob $i/$blobcount\r" >&2 && printf "blob\nmark :$i\ndata $blobsize\n" && - #test-genrandom $i $blobsize && + #test-tool genrandom $i $blobsize && printf "%-${blobsize}s" $i && echo "M 100644 :$i $i" >> commit i=$(($i+1)) || diff --git a/t/t5615-alternate-env.sh b/t/t5615-alternate-env.sh index d2d883f3a1..b4905b822c 100755 --- a/t/t5615-alternate-env.sh +++ b/t/t5615-alternate-env.sh @@ -7,9 +7,9 @@ check_obj () { alt=$1; shift while read obj expect do - echo "$obj" >&3 && - echo "$obj $expect" >&4 - done 3>input 4>expect && + echo "$obj" >&5 && + echo "$obj $expect" >&6 + done 5>input 6>expect && GIT_ALTERNATE_OBJECT_DIRECTORIES=$alt \ git "$@" cat-file --batch-check='%(objectname) %(objecttype)' \ <input >actual && diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh new file mode 100755 index 0000000000..cee5565367 --- /dev/null +++ b/t/t5616-partial-clone.sh @@ -0,0 +1,157 @@ +#!/bin/sh + +test_description='git partial clone' + +. ./test-lib.sh + +# create a normal "src" repo where we can later create new commits. +# expect_1.oids will contain a list of the OIDs of all blobs. +test_expect_success 'setup normal src repo' ' + echo "{print \$1}" >print_1.awk && + echo "{print \$2}" >print_2.awk && + + git init src && + for n in 1 2 3 4 + do + echo "This is file: $n" > src/file.$n.txt + git -C src add file.$n.txt + git -C src commit -m "file $n" + git -C src ls-files -s file.$n.txt >>temp + done && + awk -f print_2.awk <temp | sort >expect_1.oids && + test_line_count = 4 expect_1.oids +' + +# bare clone "src" giving "srv.bare" for use as our server. +test_expect_success 'setup bare clone for server' ' + git clone --bare "file://$(pwd)/src" srv.bare && + git -C srv.bare config --local uploadpack.allowfilter 1 && + git -C srv.bare config --local uploadpack.allowanysha1inwant 1 +' + +# do basic partial clone from "srv.bare" +# confirm we are missing all of the known blobs. +# confirm partial clone was registered in the local config. +test_expect_success 'do partial clone 1' ' + git clone --no-checkout --filter=blob:none "file://$(pwd)/srv.bare" pc1 && + git -C pc1 rev-list HEAD --quiet --objects --missing=print \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed.oids && + test_cmp expect_1.oids observed.oids && + test "$(git -C pc1 config --local core.repositoryformatversion)" = "1" && + test "$(git -C pc1 config --local extensions.partialclone)" = "origin" && + test "$(git -C pc1 config --local core.partialclonefilter)" = "blob:none" +' + +# checkout master to force dynamic object fetch of blobs at HEAD. +test_expect_success 'verify checkout with dynamic object fetch' ' + git -C pc1 rev-list HEAD --quiet --objects --missing=print >observed && + test_line_count = 4 observed && + git -C pc1 checkout master && + git -C pc1 rev-list HEAD --quiet --objects --missing=print >observed && + test_line_count = 0 observed +' + +# create new commits in "src" repo to establish a blame history on file.1.txt +# and push to "srv.bare". +test_expect_success 'push new commits to server' ' + git -C src remote add srv "file://$(pwd)/srv.bare" && + for x in a b c d e + do + echo "Mod file.1.txt $x" >>src/file.1.txt + git -C src add file.1.txt + git -C src commit -m "mod $x" + done && + git -C src blame master -- file.1.txt >expect.blame && + git -C src push -u srv master +' + +# (partial) fetch in the partial clone repo from the promisor remote. +# verify that fetch inherited the filter-spec from the config and DOES NOT +# have the new blobs. +test_expect_success 'partial fetch inherits filter settings' ' + git -C pc1 fetch origin && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 5 observed +' + +# force dynamic object fetch using diff. +# we should only get 1 new blob (for the file in origin/master). +test_expect_success 'verify diff causes dynamic object fetch' ' + git -C pc1 diff master..origin/master -- file.1.txt && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 4 observed +' + +# force full dynamic object fetch of the file's history using blame. +# we should get the intermediate blobs for the file. +test_expect_success 'verify blame causes dynamic object fetch' ' + git -C pc1 blame origin/master -- file.1.txt >observed.blame && + test_cmp expect.blame observed.blame && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 0 observed +' + +# create new commits in "src" repo to establish a history on file.2.txt +# and push to "srv.bare". +test_expect_success 'push new commits to server for file.2.txt' ' + for x in a b c d e f + do + echo "Mod file.2.txt $x" >>src/file.2.txt + git -C src add file.2.txt + git -C src commit -m "mod $x" + done && + git -C src push -u srv master +' + +# Do FULL fetch by disabling inherited filter-spec using --no-filter. +# Verify we have all the new blobs. +test_expect_success 'override inherited filter-spec using --no-filter' ' + git -C pc1 fetch --no-filter origin && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 0 observed +' + +# create new commits in "src" repo to establish a history on file.3.txt +# and push to "srv.bare". +test_expect_success 'push new commits to server for file.3.txt' ' + for x in a b c d e f + do + echo "Mod file.3.txt $x" >>src/file.3.txt + git -C src add file.3.txt + git -C src commit -m "mod $x" + done && + git -C src push -u srv master +' + +# Do a partial fetch and then try to manually fetch the missing objects. +# This can be used as the basis of a pre-command hook to bulk fetch objects +# perhaps combined with a command in dry-run mode. +test_expect_success 'manual prefetch of missing objects' ' + git -C pc1 fetch --filter=blob:none origin && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed.oids && + test_line_count = 6 observed.oids && + git -C pc1 fetch-pack --stdin "file://$(pwd)/srv.bare" <observed.oids && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed.oids && + test_line_count = 0 observed.oids +' + +test_expect_success 'partial clone with transfer.fsckobjects=1 uses index-pack --fsck-objects' ' + git init src && + test_commit -C src x && + test_config -C src uploadpack.allowfilter 1 && + test_config -C src uploadpack.allowanysha1inwant 1 && + + GIT_TRACE="$(pwd)/trace" git -c transfer.fsckobjects=1 \ + clone --filter="blob:none" "file://$(pwd)/src" dst && + grep "git index-pack.*--fsck-objects" trace +' + +test_done diff --git a/t/t5700-protocol-v1.sh b/t/t5700-protocol-v1.sh new file mode 100755 index 0000000000..ba86a44eb1 --- /dev/null +++ b/t/t5700-protocol-v1.sh @@ -0,0 +1,294 @@ +#!/bin/sh + +test_description='test git wire-protocol transition' + +TEST_NO_CREATE_REPO=1 + +. ./test-lib.sh + +# Test protocol v1 with 'git://' transport +# +. "$TEST_DIRECTORY"/lib-git-daemon.sh +start_git_daemon --export-all --enable=receive-pack +daemon_parent=$GIT_DAEMON_DOCUMENT_ROOT_PATH/parent + +test_expect_success 'create repo to be served by git-daemon' ' + git init "$daemon_parent" && + test_commit -C "$daemon_parent" one +' + +test_expect_success 'clone with git:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -c protocol.version=1 \ + clone "$GIT_DAEMON_URL/parent" daemon_child 2>log && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "clone> .*\\\0\\\0version=1\\\0$" log && + # Server responded using protocol v1 + grep "clone< version 1" log +' + +test_expect_success 'fetch with git:// using protocol v1' ' + test_commit -C "$daemon_parent" two && + + GIT_TRACE_PACKET=1 git -C daemon_child -c protocol.version=1 \ + fetch 2>log && + + git -C daemon_child log -1 --format=%s origin/master >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "fetch> .*\\\0\\\0version=1\\\0$" log && + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'pull with git:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -C daemon_child -c protocol.version=1 \ + pull 2>log && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "fetch> .*\\\0\\\0version=1\\\0$" log && + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'push with git:// using protocol v1' ' + test_commit -C daemon_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET=1 git -C daemon_child -c protocol.version=1 \ + push origin HEAD:client_branch 2>log && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "push> .*\\\0\\\0version=1\\\0$" log && + # Server responded using protocol v1 + grep "push< version 1" log +' + +stop_git_daemon + +# Test protocol v1 with 'file://' transport +# +test_expect_success 'create repo to be served by file:// transport' ' + git init file_parent && + test_commit -C file_parent one +' + +test_expect_success 'clone with file:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -c protocol.version=1 \ + clone "file://$(pwd)/file_parent" file_child 2>log && + + git -C file_child log -1 --format=%s >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "clone< version 1" log +' + +test_expect_success 'fetch with file:// using protocol v1' ' + test_commit -C file_parent two && + + GIT_TRACE_PACKET=1 git -C file_child -c protocol.version=1 \ + fetch 2>log && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'pull with file:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -C file_child -c protocol.version=1 \ + pull 2>log && + + git -C file_child log -1 --format=%s >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'push with file:// using protocol v1' ' + test_commit -C file_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET=1 git -C file_child -c protocol.version=1 \ + push origin HEAD:client_branch 2>log && + + git -C file_child log -1 --format=%s >actual && + git -C file_parent log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "push< version 1" log +' + +# Test protocol v1 with 'ssh://' transport +# +test_expect_success 'setup ssh wrapper' ' + GIT_SSH="$GIT_BUILD_DIR/t/helper/test-fake-ssh" && + export GIT_SSH && + GIT_SSH_VARIANT=ssh && + export GIT_SSH_VARIANT && + export TRASH_DIRECTORY && + >"$TRASH_DIRECTORY"/ssh-output +' + +expect_ssh () { + test_when_finished '(cd "$TRASH_DIRECTORY" && rm -f ssh-expect && >ssh-output)' && + echo "ssh: -o SendEnv=GIT_PROTOCOL myhost $1 '$PWD/ssh_parent'" >"$TRASH_DIRECTORY/ssh-expect" && + (cd "$TRASH_DIRECTORY" && test_cmp ssh-expect ssh-output) +} + +test_expect_success 'create repo to be served by ssh:// transport' ' + git init ssh_parent && + test_commit -C ssh_parent one +' + +test_expect_success 'clone with ssh:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -c protocol.version=1 \ + clone "ssh://myhost:$(pwd)/ssh_parent" ssh_child 2>log && + expect_ssh git-upload-pack && + + git -C ssh_child log -1 --format=%s >actual && + git -C ssh_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "clone< version 1" log +' + +test_expect_success 'fetch with ssh:// using protocol v1' ' + test_commit -C ssh_parent two && + + GIT_TRACE_PACKET=1 git -C ssh_child -c protocol.version=1 \ + fetch 2>log && + expect_ssh git-upload-pack && + + git -C ssh_child log -1 --format=%s origin/master >actual && + git -C ssh_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'pull with ssh:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -C ssh_child -c protocol.version=1 \ + pull 2>log && + expect_ssh git-upload-pack && + + git -C ssh_child log -1 --format=%s >actual && + git -C ssh_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'push with ssh:// using protocol v1' ' + test_commit -C ssh_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET=1 git -C ssh_child -c protocol.version=1 \ + push origin HEAD:client_branch 2>log && + expect_ssh git-receive-pack && + + git -C ssh_child log -1 --format=%s >actual && + git -C ssh_parent log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "push< version 1" log +' + +# Test protocol v1 with 'http://' transport +# +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'create repo to be served by http:// transport' ' + git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config http.receivepack true && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" one +' + +test_expect_success 'clone with http:// using protocol v1' ' + GIT_TRACE_PACKET=1 GIT_TRACE_CURL=1 git -c protocol.version=1 \ + clone "$HTTPD_URL/smart/http_parent" http_child 2>log && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "Git-Protocol: version=1" log && + # Server responded using protocol v1 + grep "git< version 1" log +' + +test_expect_success 'fetch with http:// using protocol v1' ' + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two && + + GIT_TRACE_PACKET=1 git -C http_child -c protocol.version=1 \ + fetch 2>log && + + git -C http_child log -1 --format=%s origin/master >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "git< version 1" log +' + +test_expect_success 'pull with http:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -C http_child -c protocol.version=1 \ + pull 2>log && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "git< version 1" log +' + +test_expect_success 'push with http:// using protocol v1' ' + test_commit -C http_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET=1 git -C http_child -c protocol.version=1 \ + push origin HEAD:client_branch && #2>log && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "git< version 1" log +' + +stop_httpd + +test_done diff --git a/t/t5701-git-serve.sh b/t/t5701-git-serve.sh new file mode 100755 index 0000000000..011a5796db --- /dev/null +++ b/t/t5701-git-serve.sh @@ -0,0 +1,197 @@ +#!/bin/sh + +test_description='test git-serve and server commands' + +. ./test-lib.sh + +test_expect_success 'test capability advertisement' ' + cat >expect <<-EOF && + version 2 + agent=git/$(git version | cut -d" " -f3) + ls-refs + fetch=shallow + server-option + 0000 + EOF + + git serve --advertise-capabilities >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'stateless-rpc flag does not list capabilities' ' + # Empty request + test-pkt-line pack >in <<-EOF && + 0000 + EOF + git serve --stateless-rpc >out <in && + test_must_be_empty out && + + # EOF + git serve --stateless-rpc >out && + test_must_be_empty out +' + +test_expect_success 'request invalid capability' ' + test-pkt-line pack >in <<-EOF && + foobar + 0000 + EOF + test_must_fail git serve --stateless-rpc 2>err <in && + test_i18ngrep "unknown capability" err +' + +test_expect_success 'request with no command' ' + test-pkt-line pack >in <<-EOF && + agent=git/test + 0000 + EOF + test_must_fail git serve --stateless-rpc 2>err <in && + test_i18ngrep "no command requested" err +' + +test_expect_success 'request invalid command' ' + test-pkt-line pack >in <<-EOF && + command=foo + agent=git/test + 0000 + EOF + test_must_fail git serve --stateless-rpc 2>err <in && + test_i18ngrep "invalid command" err +' + +# Test the basics of ls-refs +# +test_expect_success 'setup some refs and tags' ' + test_commit one && + git branch dev master && + test_commit two && + git symbolic-ref refs/heads/release refs/heads/master && + git tag -a -m "annotated tag" annotated-tag +' + +test_expect_success 'basics of ls-refs' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse HEAD) HEAD + $(git rev-parse refs/heads/dev) refs/heads/dev + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/heads/release) refs/heads/release + $(git rev-parse refs/tags/annotated-tag) refs/tags/annotated-tag + $(git rev-parse refs/tags/one) refs/tags/one + $(git rev-parse refs/tags/two) refs/tags/two + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'basic ref-prefixes' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + ref-prefix refs/heads/master + ref-prefix refs/tags/one + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/tags/one) refs/tags/one + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'refs/heads prefix' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + ref-prefix refs/heads/ + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/heads/dev) refs/heads/dev + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/heads/release) refs/heads/release + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'peel parameter' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + peel + ref-prefix refs/tags/ + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/tags/annotated-tag) refs/tags/annotated-tag peeled:$(git rev-parse refs/tags/annotated-tag^{}) + $(git rev-parse refs/tags/one) refs/tags/one + $(git rev-parse refs/tags/two) refs/tags/two + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'symrefs parameter' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + symrefs + ref-prefix refs/heads/ + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/heads/dev) refs/heads/dev + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/heads/release) refs/heads/release symref-target:refs/heads/master + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'sending server-options' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + server-option=hello + server-option=world + 0001 + ref-prefix HEAD + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse HEAD) HEAD + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_done diff --git a/t/t5702-protocol-v2.sh b/t/t5702-protocol-v2.sh new file mode 100755 index 0000000000..dbfd0691c0 --- /dev/null +++ b/t/t5702-protocol-v2.sh @@ -0,0 +1,305 @@ +#!/bin/sh + +test_description='test git wire-protocol version 2' + +TEST_NO_CREATE_REPO=1 + +. ./test-lib.sh + +# Test protocol v2 with 'git://' transport +# +. "$TEST_DIRECTORY"/lib-git-daemon.sh +start_git_daemon --export-all --enable=receive-pack +daemon_parent=$GIT_DAEMON_DOCUMENT_ROOT_PATH/parent + +test_expect_success 'create repo to be served by git-daemon' ' + git init "$daemon_parent" && + test_commit -C "$daemon_parent" one +' + +test_expect_success 'list refs with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote --symref "$GIT_DAEMON_URL/parent" >actual && + + # Client requested to use protocol v2 + grep "git> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "git< version 2" log && + + git ls-remote --symref "$GIT_DAEMON_URL/parent" >expect && + test_cmp actual expect +' + +test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote "$GIT_DAEMON_URL/parent" master >actual && + + cat >expect <<-EOF && + $(git -C "$daemon_parent" rev-parse refs/heads/master)$(printf "\t")refs/heads/master + EOF + + test_cmp actual expect +' + +test_expect_success 'clone with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + clone "$GIT_DAEMON_URL/parent" daemon_child && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "clone> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "clone< version 2" log +' + +test_expect_success 'fetch with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C "$daemon_parent" two && + + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + fetch && + + git -C daemon_child log -1 --format=%s origin/master >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "fetch> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "fetch< version 2" log +' + +test_expect_success 'pull with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + pull && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "fetch> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "fetch< version 2" log +' + +test_expect_success 'push with git:// and a config of v2 does not request v2' ' + test_when_finished "rm -f log" && + + # Till v2 for push is designed, make sure that if a client has + # protocol.version configured to use v2, that the client instead falls + # back and uses v0. + + test_commit -C daemon_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + push origin HEAD:client_branch && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + ! grep "push> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + ! grep "push< version 2" log +' + +stop_git_daemon + +# Test protocol v2 with 'file://' transport +# +test_expect_success 'create repo to be served by file:// transport' ' + git init file_parent && + test_commit -C file_parent one +' + +test_expect_success 'list refs with file:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote --symref "file://$(pwd)/file_parent" >actual && + + # Server responded using protocol v2 + grep "git< version 2" log && + + git ls-remote --symref "file://$(pwd)/file_parent" >expect && + test_cmp actual expect +' + +test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote "file://$(pwd)/file_parent" master >actual && + + cat >expect <<-EOF && + $(git -C file_parent rev-parse refs/heads/master)$(printf "\t")refs/heads/master + EOF + + test_cmp actual expect +' + +test_expect_success 'server-options are sent when using ls-remote' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote -o hello -o world "file://$(pwd)/file_parent" master >actual && + + cat >expect <<-EOF && + $(git -C file_parent rev-parse refs/heads/master)$(printf "\t")refs/heads/master + EOF + + test_cmp actual expect && + grep "server-option=hello" log && + grep "server-option=world" log +' + + +test_expect_success 'clone with file:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + clone "file://$(pwd)/file_parent" file_child && + + git -C file_child log -1 --format=%s >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v2 + grep "clone< version 2" log +' + +test_expect_success 'fetch with file:// using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C file_parent two && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch origin && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v2 + grep "fetch< version 2" log +' + +test_expect_success 'ref advertisment is filtered during fetch using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C file_parent three && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch origin master && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + ! grep "refs/tags/one" log && + ! grep "refs/tags/two" log && + ! grep "refs/tags/three" log +' + +test_expect_success 'server-options are sent when fetching' ' + test_when_finished "rm -f log" && + + test_commit -C file_parent four && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch -o hello -o world origin master && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + grep "server-option=hello" log && + grep "server-option=world" log +' + +# Test protocol v2 with 'http://' transport +# +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'create repo to be served by http:// transport' ' + git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config http.receivepack true && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" one +' + +test_expect_success 'clone with http:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" GIT_TRACE_CURL="$(pwd)/log" git -c protocol.version=2 \ + clone "$HTTPD_URL/smart/http_parent" http_child && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "Git-Protocol: version=2" log && + # Server responded using protocol v2 + grep "git< version 2" log +' + +test_expect_success 'fetch with http:// using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two && + + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + fetch && + + git -C http_child log -1 --format=%s origin/master >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v2 + grep "git< version 2" log +' + +test_expect_success 'push with http:// and a config of v2 does not request v2' ' + test_when_finished "rm -f log" && + # Till v2 for push is designed, make sure that if a client has + # protocol.version configured to use v2, that the client instead falls + # back and uses v0. + + test_commit -C http_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + push origin HEAD:client_branch && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Client didnt request to use protocol v2 + ! grep "Git-Protocol: version=2" log && + # Server didnt respond using protocol v2 + ! grep "git< version 2" log +' + + +stop_httpd + +test_done diff --git a/t/t5812-proto-disable-http.sh b/t/t5812-proto-disable-http.sh index d911afd24c..872788ac8c 100755 --- a/t/t5812-proto-disable-http.sh +++ b/t/t5812-proto-disable-http.sh @@ -20,10 +20,7 @@ test_expect_success 'curl redirects respect whitelist' ' test_must_fail env GIT_ALLOW_PROTOCOL=http:https \ GIT_SMART_HTTP=0 \ git clone "$HTTPD_URL/ftp-redir/repo.git" 2>stderr && - { - test_i18ngrep "ftp.*disabled" stderr || - test_i18ngrep "your curl version is too old" - } + test_i18ngrep -E "(ftp.*disabled|your curl version is too old)" stderr ' test_expect_success 'curl limits redirects' ' diff --git a/t/t6001-rev-list-graft.sh b/t/t6001-rev-list-graft.sh index 05ddc69cf2..7504ba4751 100755 --- a/t/t6001-rev-list-graft.sh +++ b/t/t6001-rev-list-graft.sh @@ -110,4 +110,13 @@ do " done + +test_expect_success 'show advice that grafts are deprecated' ' + git show HEAD 2>err && + test_i18ngrep "git replace" err && + test_config advice.graftFileDeprecated false && + git show HEAD 2>err && + test_i18ngrep ! "git replace" err +' + test_done diff --git a/t/t6007-rev-list-cherry-pick-file.sh b/t/t6007-rev-list-cherry-pick-file.sh index 2959745196..f0268372d2 100755 --- a/t/t6007-rev-list-cherry-pick-file.sh +++ b/t/t6007-rev-list-cherry-pick-file.sh @@ -57,7 +57,7 @@ test_expect_success '--left-right' ' git rev-list --left-right B...C > actual && git name-rev --stdin --name-only --refs="*tags/*" \ < actual > actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' test_expect_success '--count' ' @@ -77,14 +77,14 @@ test_expect_success '--cherry-pick bar does not come up empty' ' git rev-list --left-right --cherry-pick B...C -- bar > actual && git name-rev --stdin --name-only --refs="*tags/*" \ < actual > actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' test_expect_success 'bar does not come up empty' ' git rev-list --left-right B...C -- bar > actual && git name-rev --stdin --name-only --refs="*tags/*" \ < actual > actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' cat >expect <<EOF @@ -96,14 +96,14 @@ test_expect_success '--cherry-pick bar does not come up empty (II)' ' git rev-list --left-right --cherry-pick F...E -- bar > actual && git name-rev --stdin --name-only --refs="*tags/*" \ < actual > actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' test_expect_success 'name-rev multiple --refs combine inclusive' ' git rev-list --left-right --cherry-pick F...E -- bar >actual && git name-rev --stdin --name-only --refs="*tags/F" --refs="*tags/E" \ <actual >actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' cat >expect <<EOF @@ -115,7 +115,7 @@ test_expect_success 'name-rev --refs excludes non-matched patterns' ' git rev-list --left-right --cherry-pick F...E -- bar >actual && git name-rev --stdin --name-only --refs="*tags/F" \ <actual >actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' cat >expect <<EOF @@ -127,14 +127,14 @@ test_expect_success 'name-rev --exclude excludes matched patterns' ' git rev-list --left-right --cherry-pick F...E -- bar >actual && git name-rev --stdin --name-only --refs="*tags/*" --exclude="*E" \ <actual >actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' test_expect_success 'name-rev --no-refs clears the refs list' ' git rev-list --left-right --cherry-pick F...E -- bar >expect && git name-rev --stdin --name-only --refs="*tags/F" --refs="*tags/E" --no-refs --refs="*tags/G" \ <expect >actual && - test_cmp actual expect + test_cmp expect actual ' cat >expect <<EOF @@ -148,7 +148,7 @@ test_expect_success '--cherry-mark' ' git rev-list --cherry-mark F...E -- bar > actual && git name-rev --stdin --name-only --refs="*tags/*" \ < actual > actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' cat >expect <<EOF @@ -162,7 +162,7 @@ test_expect_success '--cherry-mark --left-right' ' git rev-list --cherry-mark --left-right F...E -- bar > actual && git name-rev --stdin --name-only --refs="*tags/*" \ < actual > actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' cat >expect <<EOF @@ -173,14 +173,14 @@ test_expect_success '--cherry-pick --right-only' ' git rev-list --cherry-pick --right-only F...E -- bar > actual && git name-rev --stdin --name-only --refs="*tags/*" \ < actual > actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' test_expect_success '--cherry-pick --left-only' ' git rev-list --cherry-pick --left-only E...F -- bar > actual && git name-rev --stdin --name-only --refs="*tags/*" \ < actual > actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' cat >expect <<EOF @@ -192,7 +192,7 @@ test_expect_success '--cherry' ' git rev-list --cherry F...E -- bar > actual && git name-rev --stdin --name-only --refs="*tags/*" \ < actual > actual.named && - test_cmp actual.named expect + test_cmp expect actual.named ' cat >expect <<EOF @@ -201,7 +201,7 @@ EOF test_expect_success '--cherry --count' ' git rev-list --cherry --count F...E -- bar > actual && - test_cmp actual expect + test_cmp expect actual ' cat >expect <<EOF @@ -210,7 +210,7 @@ EOF test_expect_success '--cherry-mark --count' ' git rev-list --cherry-mark --count F...E -- bar > actual && - test_cmp actual expect + test_cmp expect actual ' cat >expect <<EOF @@ -219,7 +219,7 @@ EOF test_expect_success '--cherry-mark --left-right --count' ' git rev-list --cherry-mark --left-right --count F...E -- bar > actual && - test_cmp actual expect + test_cmp expect actual ' test_expect_success '--cherry-pick with independent, but identical branches' ' diff --git a/t/t6013-rev-list-reverse-parents.sh b/t/t6013-rev-list-reverse-parents.sh index 59fc2f06e0..89458d370f 100755 --- a/t/t6013-rev-list-reverse-parents.sh +++ b/t/t6013-rev-list-reverse-parents.sh @@ -28,7 +28,7 @@ test_expect_success '--reverse --parents --full-history combines correctly' ' perl -e "print reverse <>" > expected && git rev-list --reverse --parents --full-history master -- foo \ > actual && - test_cmp actual expected + test_cmp expected actual ' test_expect_success '--boundary does too' ' @@ -36,7 +36,7 @@ test_expect_success '--boundary does too' ' perl -e "print reverse <>" > expected && git rev-list --boundary --reverse --parents --full-history \ master ^root -- foo > actual && - test_cmp actual expected + test_cmp expected actual ' test_done diff --git a/t/t6015-rev-list-show-all-parents.sh b/t/t6015-rev-list-show-all-parents.sh deleted file mode 100755 index 3c73c93ba6..0000000000 --- a/t/t6015-rev-list-show-all-parents.sh +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/sh - -test_description='--show-all --parents does not rewrite TREESAME commits' - -. ./test-lib.sh - -test_expect_success 'set up --show-all --parents test' ' - test_commit one foo.txt && - commit1=$(git rev-list -1 HEAD) && - test_commit two bar.txt && - commit2=$(git rev-list -1 HEAD) && - test_commit three foo.txt && - commit3=$(git rev-list -1 HEAD) - ' - -test_expect_success '--parents rewrites TREESAME parents correctly' ' - echo $commit3 $commit1 > expected && - echo $commit1 >> expected && - git rev-list --parents HEAD -- foo.txt > actual && - test_cmp expected actual - ' - -test_expect_success '--parents --show-all does not rewrites TREESAME parents' ' - echo $commit3 $commit2 > expected && - echo $commit2 $commit1 >> expected && - echo $commit1 >> expected && - git rev-list --parents --show-all HEAD -- foo.txt > actual && - test_cmp expected actual - ' - -test_done diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh index 05ebba7afa..b760c223c6 100755 --- a/t/t6022-merge-rename.sh +++ b/t/t6022-merge-rename.sh @@ -242,10 +242,12 @@ test_expect_success 'merge of identical changes in a renamed file' ' rm -f A M N && git reset --hard && git checkout change+rename && - GIT_MERGE_VERBOSITY=3 git merge change | test_i18ngrep "^Skipped B" && + GIT_MERGE_VERBOSITY=3 git merge change >out && + test_i18ngrep "^Skipped B" out && git reset --hard HEAD^ && git checkout change && - GIT_MERGE_VERBOSITY=3 git merge change+rename | test_i18ngrep "^Skipped B" + GIT_MERGE_VERBOSITY=3 git merge change+rename >out && + test_i18ngrep ! "^Skipped B" out ' test_expect_success 'setup for rename + d/f conflicts' ' @@ -633,10 +635,9 @@ test_expect_success 'setup avoid unnecessary update, normal rename' ' test_expect_success 'avoid unnecessary update, normal rename' ' git checkout -q avoid-unnecessary-update-1^0 && - test-chmtime =1000000000 rename && - test-chmtime -v +0 rename >expect && + test-tool chmtime --get =1000000000 rename >expect && git merge merge-branch-1 && - test-chmtime -v +0 rename >actual && + test-tool chmtime --get rename >actual && test_cmp expect actual # "rename" should have stayed intact ' @@ -666,10 +667,9 @@ test_expect_success 'setup to test avoiding unnecessary update, with D/F conflic test_expect_success 'avoid unnecessary update, with D/F conflict' ' git checkout -q avoid-unnecessary-update-2^0 && - test-chmtime =1000000000 df && - test-chmtime -v +0 df >expect && + test-tool chmtime --get =1000000000 df >expect && git merge merge-branch-2 && - test-chmtime -v +0 df >actual && + test-tool chmtime --get df >actual && test_cmp expect actual # "df" should have stayed intact ' @@ -698,10 +698,9 @@ test_expect_success 'setup avoid unnecessary update, dir->(file,nothing)' ' test_expect_success 'avoid unnecessary update, dir->(file,nothing)' ' git checkout -q master^0 && - test-chmtime =1000000000 df && - test-chmtime -v +0 df >expect && + test-tool chmtime --get =1000000000 df >expect && git merge side && - test-chmtime -v +0 df >actual && + test-tool chmtime --get df >actual && test_cmp expect actual # "df" should have stayed intact ' @@ -728,10 +727,9 @@ test_expect_success 'setup avoid unnecessary update, modify/delete' ' test_expect_success 'avoid unnecessary update, modify/delete' ' git checkout -q master^0 && - test-chmtime =1000000000 file && - test-chmtime -v +0 file >expect && + test-tool chmtime --get =1000000000 file >expect && test_must_fail git merge side && - test-chmtime -v +0 file >actual && + test-tool chmtime --get file >actual && test_cmp expect actual # "file" should have stayed intact ' @@ -757,10 +755,9 @@ test_expect_success 'setup avoid unnecessary update, rename/add-dest' ' test_expect_success 'avoid unnecessary update, rename/add-dest' ' git checkout -q master^0 && - test-chmtime =1000000000 newfile && - test-chmtime -v +0 newfile >expect && + test-tool chmtime --get =1000000000 newfile >expect && git merge side && - test-chmtime -v +0 newfile >actual && + test-tool chmtime --get newfile >actual && test_cmp expect actual # "file" should have stayed intact ' diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index 8c2c6eaef8..f84ff941c3 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -894,4 +894,21 @@ test_expect_success 'bisect start takes options and revs in any order' ' test_cmp expected actual ' +test_expect_success 'git bisect reset cleans bisection state properly' ' + git bisect reset && + git bisect start && + git bisect good $HASH1 && + git bisect bad $HASH4 && + git bisect reset && + test -z "$(git for-each-ref "refs/bisect/*")" && + test_path_is_missing "$GIT_DIR/BISECT_EXPECTED_REV" && + test_path_is_missing "$GIT_DIR/BISECT_ANCESTORS_OK" && + test_path_is_missing "$GIT_DIR/BISECT_LOG" && + test_path_is_missing "$GIT_DIR/BISECT_RUN" && + test_path_is_missing "$GIT_DIR/BISECT_TERMS" && + test_path_is_missing "$GIT_DIR/head-name" && + test_path_is_missing "$GIT_DIR/BISECT_HEAD" && + test_path_is_missing "$GIT_DIR/BISECT_START" +' + test_done diff --git a/t/t6037-merge-ours-theirs.sh b/t/t6037-merge-ours-theirs.sh index 3889eca4ae..0aebc6c028 100755 --- a/t/t6037-merge-ours-theirs.sh +++ b/t/t6037-merge-ours-theirs.sh @@ -73,4 +73,36 @@ test_expect_success 'pull passes -X to underlying merge' ' git reset --hard master && test_must_fail git pull -s recursive -X bork . side ' +test_expect_success SYMLINKS 'symlink with -Xours/-Xtheirs' ' + git reset --hard master && + git checkout -b two master && + ln -s target-zero link && + git add link && + git commit -m "add link pointing to zero" && + + ln -f -s target-two link && + git commit -m "add link pointing to two" link && + + git checkout -b one HEAD^ && + ln -f -s target-one link && + git commit -m "add link pointing to one" link && + + # we expect symbolic links not to resolve automatically, of course + git checkout one^0 && + test_must_fail git merge -s recursive two && + + # favor theirs to resolve to target-two? + git reset --hard && + git checkout one^0 && + git merge -s recursive -X theirs two && + git diff --exit-code two HEAD link && + + # favor ours to resolve to target-one? + git reset --hard && + git checkout one^0 && + git merge -s recursive -X ours two && + git diff --exit-code one HEAD link + +' + test_done diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index 97a07655a0..716283b274 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -100,7 +100,7 @@ test_expect_success 'checkout (up-to-date with upstream)' ' ( cd test && git checkout b6 ) >actual && - test_i18ngrep "Your branch is up-to-date with .origin/master" actual + test_i18ngrep "Your branch is up to date with .origin/master" actual ' test_expect_success 'status (diverged from upstream)' ' @@ -130,7 +130,7 @@ test_expect_success 'status (up-to-date with upstream)' ' # reports nothing to commit test_must_fail git commit --dry-run ) >actual && - test_i18ngrep "Your branch is up-to-date with .origin/master" actual + test_i18ngrep "Your branch is up to date with .origin/master" actual ' cat >expect <<\EOF @@ -147,6 +147,48 @@ test_expect_success 'status -s -b (diverged from upstream)' ' ' cat >expect <<\EOF +## b1...origin/master [different] +EOF + +test_expect_success 'status -s -b --no-ahead-behind (diverged from upstream)' ' + ( + cd test && + git checkout b1 >/dev/null && + git status -s -b --no-ahead-behind | head -1 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF +On branch b1 +Your branch and 'origin/master' have diverged, +and have 1 and 1 different commits each, respectively. +EOF + +test_expect_success 'status --long --branch' ' + ( + cd test && + git checkout b1 >/dev/null && + git status --long -b | head -3 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF +On branch b1 +Your branch and 'origin/master' refer to different commits. +EOF + +test_expect_success 'status --long --branch --no-ahead-behind' ' + ( + cd test && + git checkout b1 >/dev/null && + git status --long -b --no-ahead-behind | head -2 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF ## b5...brokenbase [gone] EOF @@ -188,35 +230,29 @@ test_expect_success 'fail to track annotated tags' ' test_must_fail git checkout heavytrack ' -test_expect_success 'setup tracking with branch --set-upstream on existing branch' ' +test_expect_success '--set-upstream-to does not change branch' ' git branch from-master master && - test_must_fail git config branch.from-master.merge > actual && - git branch --set-upstream from-master master && - git config branch.from-master.merge > actual && - grep -q "^refs/heads/master$" actual -' - -test_expect_success '--set-upstream does not change branch' ' + git branch --set-upstream-to master from-master && git branch from-master2 master && test_must_fail git config branch.from-master2.merge > actual && git rev-list from-master2 && git update-ref refs/heads/from-master2 from-master2^ && git rev-parse from-master2 >expect2 && - git branch --set-upstream from-master2 master && + git branch --set-upstream-to master from-master2 && git config branch.from-master.merge > actual && git rev-parse from-master2 >actual2 && grep -q "^refs/heads/master$" actual && cmp expect2 actual2 ' -test_expect_success '--set-upstream @{-1}' ' - git checkout from-master && +test_expect_success '--set-upstream-to @{-1}' ' + git checkout follower && git checkout from-master2 && git config branch.from-master2.merge > expect2 && - git branch --set-upstream @{-1} follower && + git branch --set-upstream-to @{-1} from-master && git config branch.from-master.merge > actual && git config branch.from-master2.merge > actual2 && - git branch --set-upstream from-master follower && + git branch --set-upstream-to follower from-master && git config branch.from-master.merge > expect && test_cmp expect2 actual2 && test_cmp expect actual diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh new file mode 100755 index 0000000000..2e28f2908d --- /dev/null +++ b/t/t6043-merge-rename-directories.sh @@ -0,0 +1,3998 @@ +#!/bin/sh + +test_description="recursive merge with directory renames" +# includes checking of many corner cases, with a similar methodology to: +# t6042: corner cases with renames but not criss-cross merges +# t6036: corner cases with both renames and criss-cross merges +# +# The setup for all of them, pictorially, is: +# +# A +# o +# / \ +# O o ? +# \ / +# o +# B +# +# To help make it easier to follow the flow of tests, they have been +# divided into sections and each test will start with a quick explanation +# of what commits O, A, and B contain. +# +# Notation: +# z/{b,c} means files z/b and z/c both exist +# x/d_1 means file x/d exists with content d1. (Purpose of the +# underscore notation is to differentiate different +# files that might be renamed into each other's paths.) + +. ./test-lib.sh + + +########################################################################### +# SECTION 1: Basic cases we should be able to handle +########################################################################### + +# Testcase 1a, Basic directory rename. +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d,e/f} +# Expected: y/{b,c,d,e/f} + +test_expect_success '1a-setup: Simple directory rename detection' ' + test_create_repo 1a && + ( + cd 1a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + mkdir z/e && + echo f >z/e/f && + git add z/d z/e/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1a-check: Simple directory rename detection' ' + ( + cd 1a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:y/e/f && + git rev-parse >expect \ + O:z/b O:z/c B:z/d B:z/e/f && + test_cmp expect actual && + + git hash-object y/d >actual && + git rev-parse B:z/d >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:z/d && + test_must_fail git rev-parse HEAD:z/e/f && + test_path_is_missing z/d && + test_path_is_missing z/e/f + ) +' + +# Testcase 1b, Merge a directory with another +# Commit O: z/{b,c}, y/d +# Commit A: z/{b,c,e}, y/d +# Commit B: y/{b,c,d} +# Expected: y/{b,c,d,e} + +test_expect_success '1b-setup: Merge a directory with another' ' + test_create_repo 1b && + ( + cd 1b && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir y && + echo d >y/d && + git add z y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e >z/e && + git add z/e && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/b y && + git mv z/c y && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1b-check: Merge a directory with another' ' + ( + cd 1b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:y/e && + git rev-parse >expect \ + O:z/b O:z/c O:y/d A:z/e && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:z/e + ) +' + +# Testcase 1c, Transitive renaming +# (Related to testcases 3a and 6d -- when should a transitive rename apply?) +# (Related to testcases 9c and 9d -- can transitivity repeat?) +# (Related to testcase 12b -- joint-transitivity?) +# Commit O: z/{b,c}, x/d +# Commit A: y/{b,c}, x/d +# Commit B: z/{b,c,d} +# Expected: y/{b,c,d} (because x/d -> z/d -> y/d) + +test_expect_success '1c-setup: Transitive renaming' ' + test_create_repo 1c && + ( + cd 1c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1c-check: Transitive renaming' ' + ( + cd 1c && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:x/d && + test_must_fail git rev-parse HEAD:z/d && + test_path_is_missing z/d + ) +' + +# Testcase 1d, Directory renames (merging two directories into one new one) +# cause a rename/rename(2to1) conflict +# (Related to testcases 1c and 7b) +# Commit O. z/{b,c}, y/{d,e} +# Commit A. x/{b,c}, y/{d,e,m,wham_1} +# Commit B. z/{b,c,n,wham_2}, x/{d,e} +# Expected: x/{b,c,d,e,m,n}, CONFLICT:(y/wham_1 & z/wham_2 -> x/wham) +# Note: y/m & z/n should definitely move into x. By the same token, both +# y/wham_1 & z/wham_2 should too...giving us a conflict. + +test_expect_success '1d-setup: Directory renames cause a rename/rename(2to1) conflict' ' + test_create_repo 1d && + ( + cd 1d && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir y && + echo d >y/d && + echo e >y/e && + git add z y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z x && + echo m >y/m && + echo wham1 >y/wham && + git add y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv y x && + echo n >z/n && + echo wham2 >z/wham && + git add z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) conflict' ' + ( + cd 1d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename)" out && + + git ls-files -s >out && + test_line_count = 8 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:x/b :0:x/c :0:x/d :0:x/e :0:x/m :0:x/n && + git rev-parse >expect \ + O:z/b O:z/c O:y/d O:y/e A:y/m B:z/n && + test_cmp expect actual && + + test_must_fail git rev-parse :0:x/wham && + git rev-parse >actual \ + :2:x/wham :3:x/wham && + git rev-parse >expect \ + A:y/wham B:z/wham && + test_cmp expect actual && + + test_path_is_missing x/wham && + test_path_is_file x/wham~HEAD && + test_path_is_file x/wham~B^0 && + + git hash-object >actual \ + x/wham~HEAD x/wham~B^0 && + git rev-parse >expect \ + A:y/wham B:z/wham && + test_cmp expect actual + ) +' + +# Testcase 1e, Renamed directory, with all filenames being renamed too +# (Related to testcases 9f & 9g) +# Commit O: z/{oldb,oldc} +# Commit A: y/{newb,newc} +# Commit B: z/{oldb,oldc,d} +# Expected: y/{newb,newc,d} + +test_expect_success '1e-setup: Renamed directory, with all files being renamed too' ' + test_create_repo 1e && + ( + cd 1e && + + mkdir z && + echo b >z/oldb && + echo c >z/oldc && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + git mv z/oldb y/newb && + git mv z/oldc y/newc && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1e-check: Renamed directory, with all files being renamed too' ' + ( + cd 1e && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/newb HEAD:y/newc HEAD:y/d && + git rev-parse >expect \ + O:z/oldb O:z/oldc B:z/d && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:z/d + ) +' + +# Testcase 1f, Split a directory into two other directories +# (Related to testcases 3a, all of section 2, and all of section 4) +# Commit O: z/{b,c,d,e,f} +# Commit A: z/{b,c,d,e,f,g} +# Commit B: y/{b,c}, x/{d,e,f} +# Expected: y/{b,c}, x/{d,e,f,g} + +test_expect_success '1f-setup: Split a directory into two other directories' ' + test_create_repo 1f && + ( + cd 1f && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + echo e >z/e && + echo f >z/f && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo g >z/g && + git add z/g && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + git mv z/e x/ && + git mv z/f x/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1f-check: Split a directory into two other directories' ' + ( + cd 1f && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:x/d HEAD:x/e HEAD:x/f HEAD:x/g && + git rev-parse >expect \ + O:z/b O:z/c O:z/d O:z/e O:z/f A:z/g && + test_cmp expect actual && + test_path_is_missing z/g && + test_must_fail git rev-parse HEAD:z/g + ) +' + +########################################################################### +# Rules suggested by testcases in section 1: +# +# We should still detect the directory rename even if it wasn't just +# the directory renamed, but the files within it. (see 1b) +# +# If renames split a directory into two or more others, the directory +# with the most renames, "wins" (see 1c). However, see the testcases +# in section 2, plus testcases 3a and 4a. +########################################################################### + + +########################################################################### +# SECTION 2: Split into multiple directories, with equal number of paths +# +# Explore the splitting-a-directory rules a bit; what happens in the +# edge cases? +# +# Note that there is a closely related case of a directory not being +# split on either side of history, but being renamed differently on +# each side. See testcase 8e for that. +########################################################################### + +# Testcase 2a, Directory split into two on one side, with equal numbers of paths +# Commit O: z/{b,c} +# Commit A: y/b, w/c +# Commit B: z/{b,c,d} +# Expected: y/b, w/c, z/d, with warning about z/ -> (y/ vs. w/) conflict +test_expect_success '2a-setup: Directory split into two on one side, with equal numbers of paths' ' + test_create_repo 2a && + ( + cd 2a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + mkdir w && + git mv z/b y/ && + git mv z/c w/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2a-check: Directory split into two on one side, with equal numbers of paths' ' + ( + cd 2a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT.*directory rename split" out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:w/c :0:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/d && + test_cmp expect actual + ) +' + +# Testcase 2b, Directory split into two on one side, with equal numbers of paths +# Commit O: z/{b,c} +# Commit A: y/b, w/c +# Commit B: z/{b,c}, x/d +# Expected: y/b, w/c, x/d; No warning about z/ -> (y/ vs. w/) conflict +test_expect_success '2b-setup: Directory split into two on one side, with equal numbers of paths' ' + test_create_repo 2b && + ( + cd 2b && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + mkdir w && + git mv z/b y/ && + git mv z/c w/ && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir x && + echo d >x/d && + git add x/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2b-check: Directory split into two on one side, with equal numbers of paths' ' + ( + cd 2b && + + git checkout A^0 && + + git merge -s recursive B^0 >out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:w/c :0:x/d && + git rev-parse >expect \ + O:z/b O:z/c B:x/d && + test_cmp expect actual && + test_i18ngrep ! "CONFLICT.*directory rename split" out + ) +' + +########################################################################### +# Rules suggested by section 2: +# +# None; the rule was already covered in section 1. These testcases are +# here just to make sure the conflict resolution and necessary warning +# messages are handled correctly. +########################################################################### + + +########################################################################### +# SECTION 3: Path in question is the source path for some rename already +# +# Combining cases from Section 1 and trying to handle them could lead to +# directory renaming detection being over-applied. So, this section +# provides some good testcases to check that the implementation doesn't go +# too far. +########################################################################### + +# Testcase 3a, Avoid implicit rename if involved as source on other side +# (Related to testcases 1c, 1f, and 9h) +# Commit O: z/{b,c,d} +# Commit A: z/{b,c,d} (no change) +# Commit B: y/{b,c}, x/d +# Expected: y/{b,c}, x/d +test_expect_success '3a-setup: Avoid implicit rename if involved as source on other side' ' + test_create_repo 3a && + ( + cd 3a && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3a-check: Avoid implicit rename if involved as source on other side' ' + ( + cd 3a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:x/d && + git rev-parse >expect \ + O:z/b O:z/c O:z/d && + test_cmp expect actual + ) +' + +# Testcase 3b, Avoid implicit rename if involved as source on other side +# (Related to testcases 5c and 7c, also kind of 1e and 1f) +# Commit O: z/{b,c,d} +# Commit A: y/{b,c}, x/d +# Commit B: z/{b,c}, w/d +# Expected: y/{b,c}, CONFLICT:(z/d -> x/d vs. w/d) +# NOTE: We're particularly checking that since z/d is already involved as +# a source in a file rename on the same side of history, that we don't +# get it involved in directory rename detection. If it were, we might +# end up with CONFLICT:(z/d -> y/d vs. x/d vs. w/d), i.e. a +# rename/rename/rename(1to3) conflict, which is just weird. +test_expect_success '3b-setup: Avoid implicit rename if involved as source on current side' ' + test_create_repo 3b && + ( + cd 3b && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + rmdir z && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir w && + git mv z/d w/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3b-check: Avoid implicit rename if involved as source on current side' ' + ( + cd 3b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep CONFLICT.*rename/rename.*z/d.*x/d.*w/d out && + test_i18ngrep ! CONFLICT.*rename/rename.*y/d out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :1:z/d :2:x/d :3:w/d && + git rev-parse >expect \ + O:z/b O:z/c O:z/d O:z/d O:z/d && + test_cmp expect actual && + + test_path_is_missing z/d && + git hash-object >actual \ + x/d w/d && + git rev-parse >expect \ + O:z/d O:z/d && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 3: +# +# Avoid directory-rename-detection for a path, if that path is the source +# of a rename on either side of a merge. +########################################################################### + + +########################################################################### +# SECTION 4: Partially renamed directory; still exists on both sides of merge +# +# What if we were to attempt to do directory rename detection when someone +# "mostly" moved a directory but still left some files around, or, +# equivalently, fully renamed a directory in one commmit and then recreated +# that directory in a later commit adding some new files and then tried to +# merge? +# +# It's hard to divine user intent in these cases, because you can make an +# argument that, depending on the intermediate history of the side being +# merged, that some users will want files in that directory to +# automatically be detected and renamed, while users with a different +# intermediate history wouldn't want that rename to happen. +# +# I think that it is best to simply not have directory rename detection +# apply to such cases. My reasoning for this is four-fold: (1) it's +# easiest for users in general to figure out what happened if we don't +# apply directory rename detection in any such case, (2) it's an easy rule +# to explain ["We don't do directory rename detection if the directory +# still exists on both sides of the merge"], (3) we can get some hairy +# edge/corner cases that would be really confusing and possibly not even +# representable in the index if we were to even try, and [related to 3] (4) +# attempting to resolve this issue of divining user intent by examining +# intermediate history goes against the spirit of three-way merges and is a +# path towards crazy corner cases that are far more complex than what we're +# already dealing with. +# +# Note that the wording of the rule ("We don't do directory rename +# detection if the directory still exists on both sides of the merge.") +# also excludes "renaming" of a directory into a subdirectory of itself +# (e.g. /some/dir/* -> /some/dir/subdir/*). It may be possible to carve +# out an exception for "renaming"-beneath-itself cases without opening +# weird edge/corner cases for other partial directory renames, but for now +# we are keeping the rule simple. +# +# This section contains a test for a partially-renamed-directory case. +########################################################################### + +# Testcase 4a, Directory split, with original directory still present +# (Related to testcase 1f) +# Commit O: z/{b,c,d,e} +# Commit A: y/{b,c,d}, z/e +# Commit B: z/{b,c,d,e,f} +# Expected: y/{b,c,d}, z/{e,f} +# NOTE: Even though most files from z moved to y, we don't want f to follow. + +test_expect_success '4a-setup: Directory split, with original directory still present' ' + test_create_repo 4a && + ( + cd 4a && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + echo e >z/e && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d y/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo f >z/f && + git add z/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '4a-check: Directory split, with original directory still present' ' + ( + cd 4a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:z/e HEAD:z/f && + git rev-parse >expect \ + O:z/b O:z/c O:z/d O:z/e B:z/f && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 4: +# +# Directory-rename-detection should be turned off for any directories (as +# a source for renames) that exist on both sides of the merge. (The "as +# a source for renames" clarification is due to cases like 1c where +# the target directory exists on both sides and we do want the rename +# detection.) But, sadly, see testcase 8b. +########################################################################### + + +########################################################################### +# SECTION 5: Files/directories in the way of subset of to-be-renamed paths +# +# Implicitly renaming files due to a detected directory rename could run +# into problems if there are files or directories in the way of the paths +# we want to rename. Explore such cases in this section. +########################################################################### + +# Testcase 5a, Merge directories, other side adds files to original and target +# Commit O: z/{b,c}, y/d +# Commit A: z/{b,c,e_1,f}, y/{d,e_2} +# Commit B: y/{b,c,d} +# Expected: z/e_1, y/{b,c,d,e_2,f} + CONFLICT warning +# NOTE: While directory rename detection is active here causing z/f to +# become y/f, we did not apply this for z/e_1 because that would +# give us an add/add conflict for y/e_1 vs y/e_2. This problem with +# this add/add, is that both versions of y/e are from the same side +# of history, giving us no way to represent this conflict in the +# index. + +test_expect_success '5a-setup: Merge directories, other side adds files to original and target' ' + test_create_repo 5a && + ( + cd 5a && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir y && + echo d >y/d && + git add z y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e1 >z/e && + echo f >z/f && + echo e2 >y/e && + git add z/e z/f y/e && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/b y/ && + git mv z/c y/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5a-check: Merge directories, other side adds files to original and target' ' + ( + cd 5a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT.*implicit dir rename" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/d :0:y/e :0:z/e :0:y/f && + git rev-parse >expect \ + O:z/b O:z/c O:y/d A:y/e A:z/e A:z/f && + test_cmp expect actual + ) +' + +# Testcase 5b, Rename/delete in order to get add/add/add conflict +# (Related to testcase 8d; these may appear slightly inconsistent to users; +# Also related to testcases 7d and 7e) +# Commit O: z/{b,c,d_1} +# Commit A: y/{b,c,d_2} +# Commit B: z/{b,c,d_1,e}, y/d_3 +# Expected: y/{b,c,e}, CONFLICT(add/add: y/d_2 vs. y/d_3) +# NOTE: If z/d_1 in commit B were to be involved in dir rename detection, as +# we normaly would since z/ is being renamed to y/, then this would be +# a rename/delete (z/d_1 -> y/d_1 vs. deleted) AND an add/add/add +# conflict of y/d_1 vs. y/d_2 vs. y/d_3. Add/add/add is not +# representable in the index, so the existence of y/d_3 needs to +# cause us to bail on directory rename detection for that path, falling +# back to git behavior without the directory rename detection. + +test_expect_success '5b-setup: Rename/delete in order to get add/add/add conflict' ' + test_create_repo 5b && + ( + cd 5b && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d1 >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/d && + git mv z y && + echo d2 >y/d && + git add y/d && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y && + echo d3 >y/d && + echo e >z/e && + git add y/d z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5b-check: Rename/delete in order to get add/add/add conflict' ' + ( + cd 5b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (add/add).* y/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/e :2:y/d :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/e A:y/d B:y/d && + test_cmp expect actual && + + test_must_fail git rev-parse :1:y/d && + test_path_is_file y/d + ) +' + +# Testcase 5c, Transitive rename would cause rename/rename/rename/add/add/add +# (Directory rename detection would result in transitive rename vs. +# rename/rename(1to2) and turn it into a rename/rename(1to3). Further, +# rename paths conflict with separate adds on the other side) +# (Related to testcases 3b and 7c) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c,d_2}, w/d_1 +# Commit B: z/{b,c,d_1,e}, w/d_3, y/d_4 +# Expected: A mess, but only a rename/rename(1to2)/add/add mess. Use the +# presence of y/d_4 in B to avoid doing transitive rename of +# x/d_1 -> z/d_1 -> y/d_1, so that the only paths we have at +# y/d are y/d_2 and y/d_4. We still do the move from z/e to y/e, +# though, because it doesn't have anything in the way. + +test_expect_success '5c-setup: Transitive rename would cause rename/rename/rename/add/add/add' ' + test_create_repo 5c && + ( + cd 5c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d1 >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + echo d2 >y/d && + git add y/d && + git mv x w && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + mkdir w && + mkdir y && + echo d3 >w/d && + echo d4 >y/d && + echo e >z/e && + git add w/ y/ z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5c-check: Transitive rename would cause rename/rename/rename/add/add/add' ' + ( + cd 5c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*z/d" out && + test_i18ngrep "CONFLICT (add/add).* y/d" out && + + git ls-files -s >out && + test_line_count = 9 out && + git ls-files -u >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/e && + test_cmp expect actual && + + test_must_fail git rev-parse :1:y/d && + git rev-parse >actual \ + :2:w/d :3:w/d :1:x/d :2:y/d :3:y/d :3:z/d && + git rev-parse >expect \ + O:x/d B:w/d O:x/d A:y/d B:y/d O:x/d && + test_cmp expect actual && + + git hash-object >actual \ + w/d~HEAD w/d~B^0 z/d && + git rev-parse >expect \ + O:x/d B:w/d O:x/d && + test_cmp expect actual && + test_path_is_missing x/d && + test_path_is_file y/d && + grep -q "<<<<" y/d # conflict markers should be present + ) +' + +# Testcase 5d, Directory/file/file conflict due to directory rename +# Commit O: z/{b,c} +# Commit A: y/{b,c,d_1} +# Commit B: z/{b,c,d_2,f}, y/d/e +# Expected: y/{b,c,d/e,f}, z/d_2, CONFLICT(file/directory), y/d_1~HEAD +# Note: The fact that y/d/ exists in B makes us bail on directory rename +# detection for z/d_2, but that doesn't prevent us from applying the +# directory rename detection for z/f -> y/f. + +test_expect_success '5d-setup: Directory/file/file conflict due to directory rename' ' + test_create_repo 5d && + ( + cd 5d && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + echo d1 >y/d && + git add y/d && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir -p y/d && + echo e >y/d/e && + echo d2 >z/d && + echo f >z/f && + git add y/d/e z/d z/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5d-check: Directory/file/file conflict due to directory rename' ' + ( + cd 5d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (file/directory).*y/d" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:z/d :0:y/f :2:y/d :0:y/d/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/d B:z/f A:y/d B:y/d/e && + test_cmp expect actual && + + git hash-object y/d~HEAD >actual && + git rev-parse A:y/d >expect && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 5: +# +# If a subset of to-be-renamed files have a file or directory in the way, +# "turn off" the directory rename for those specific sub-paths, falling +# back to old handling. But, sadly, see testcases 8a and 8b. +########################################################################### + + +########################################################################### +# SECTION 6: Same side of the merge was the one that did the rename +# +# It may sound obvious that you only want to apply implicit directory +# renames to directories if the _other_ side of history did the renaming. +# If you did make an implementation that didn't explicitly enforce this +# rule, the majority of cases that would fall under this section would +# also be solved by following the rules from the above sections. But +# there are still a few that stick out, so this section covers them just +# to make sure we also get them right. +########################################################################### + +# Testcase 6a, Tricky rename/delete +# Commit O: z/{b,c,d} +# Commit A: z/b +# Commit B: y/{b,c}, z/d +# Expected: y/b, CONFLICT(rename/delete, z/c -> y/c vs. NULL) +# Note: We're just checking here that the rename of z/b and z/c to put +# them under y/ doesn't accidentally catch z/d and make it look like +# it is also involved in a rename/delete conflict. + +test_expect_success '6a-setup: Tricky rename/delete' ' + test_create_repo 6a && + ( + cd 6a && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/c && + git rm z/d && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y && + git mv z/b y/ && + git mv z/c y/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6a-check: Tricky rename/delete' ' + ( + cd 6a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/delete).*z/c.*y/c" out && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :3:y/c && + git rev-parse >expect \ + O:z/b O:z/c && + test_cmp expect actual + ) +' + +# Testcase 6b, Same rename done on both sides +# (Related to testcases 6c and 8e) +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: y/{b,c}, z/d +# Expected: y/{b,c}, z/d +# Note: If we did directory rename detection here, we'd move z/d into y/, +# but B did that rename and still decided to put the file into z/, +# so we probably shouldn't apply directory rename detection for it. + +test_expect_success '6b-setup: Same rename done on both sides' ' + test_create_repo 6b && + ( + cd 6b && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z y && + mkdir z && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6b-check: Same rename done on both sides' ' + ( + cd 6b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/d && + test_cmp expect actual + ) +' + +# Testcase 6c, Rename only done on same side +# (Related to testcases 6b and 8e) +# Commit O: z/{b,c} +# Commit A: z/{b,c} (no change) +# Commit B: y/{b,c}, z/d +# Expected: y/{b,c}, z/d +# NOTE: Seems obvious, but just checking that the implementation doesn't +# "accidentally detect a rename" and give us y/{b,c,d}. + +test_expect_success '6c-setup: Rename only done on same side' ' + test_create_repo 6c && + ( + cd 6c && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + git mv z y && + mkdir z && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6c-check: Rename only done on same side' ' + ( + cd 6c && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/d && + test_cmp expect actual + ) +' + +# Testcase 6d, We don't always want transitive renaming +# (Related to testcase 1c) +# Commit O: z/{b,c}, x/d +# Commit A: z/{b,c}, x/d (no change) +# Commit B: y/{b,c}, z/d +# Expected: y/{b,c}, z/d +# NOTE: Again, this seems obvious but just checking that the implementation +# doesn't "accidentally detect a rename" and give us y/{b,c,d}. + +test_expect_success '6d-setup: We do not always want transitive renaming' ' + test_create_repo 6d && + ( + cd 6d && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + git mv z y && + git mv x z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6d-check: We do not always want transitive renaming' ' + ( + cd 6d && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d && + test_cmp expect actual + ) +' + +# Testcase 6e, Add/add from one-side +# Commit O: z/{b,c} +# Commit A: z/{b,c} (no change) +# Commit B: y/{b,c,d_1}, z/d_2 +# Expected: y/{b,c,d_1}, z/d_2 +# NOTE: Again, this seems obvious but just checking that the implementation +# doesn't "accidentally detect a rename" and give us y/{b,c} + +# add/add conflict on y/d_1 vs y/d_2. + +test_expect_success '6e-setup: Add/add from one side' ' + test_create_repo 6e && + ( + cd 6e && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + git mv z y && + echo d1 > y/d && + mkdir z && + echo d2 > z/d && + git add y/d z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6e-check: Add/add from one side' ' + ( + cd 6e && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:y/d B:z/d && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 6: +# +# Only apply implicit directory renames to directories if the other +# side of history is the one doing the renaming. +########################################################################### + + +########################################################################### +# SECTION 7: More involved Edge/Corner cases +# +# The ruleset we have generated in the above sections seems to provide +# well-defined merges. But can we find edge/corner cases that either (a) +# are harder for users to understand, or (b) have a resolution that is +# non-intuitive or suboptimal? +# +# The testcases in this section dive into cases that I've tried to craft in +# a way to find some that might be surprising to users or difficult for +# them to understand (the next section will look at non-intuitive or +# suboptimal merge results). Some of the testcases are similar to ones +# from past sections, but have been simplified to try to highlight error +# messages using a "modified" path (due to the directory rename). Are +# users okay with these? +# +# In my opinion, testcases that are difficult to understand from this +# section is due to difficulty in the testcase rather than the directory +# renaming (similar to how t6042 and t6036 have difficult resolutions due +# to the problem setup itself being complex). And I don't think the +# error messages are a problem. +# +# On the other hand, the testcases in section 8 worry me slightly more... +########################################################################### + +# Testcase 7a, rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: w/b, x/c, z/d +# Expected: y/d, CONFLICT(rename/rename for both z/b and z/c) +# NOTE: There's a rename of z/ here, y/ has more renames, so z/d -> y/d. + +test_expect_success '7a-setup: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' + test_create_repo 7a && + ( + cd 7a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir w && + mkdir x && + git mv z/b w/ && + git mv z/c x/ && + echo d > z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7a-check: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' + ( + cd 7a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename).*z/b.*y/b.*w/b" out && + test_i18ngrep "CONFLICT (rename/rename).*z/c.*y/c.*x/c" out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :1:z/b :2:y/b :3:w/b :1:z/c :2:y/c :3:x/c :0:y/d && + git rev-parse >expect \ + O:z/b O:z/b O:z/b O:z/c O:z/c O:z/c B:z/d && + test_cmp expect actual && + + git hash-object >actual \ + y/b w/b y/c x/c && + git rev-parse >expect \ + O:z/b O:z/b O:z/c O:z/c && + test_cmp expect actual + ) +' + +# Testcase 7b, rename/rename(2to1), but only due to transitive rename +# (Related to testcase 1d) +# Commit O: z/{b,c}, x/d_1, w/d_2 +# Commit A: y/{b,c,d_2}, x/d_1 +# Commit B: z/{b,c,d_1}, w/d_2 +# Expected: y/{b,c}, CONFLICT(rename/rename(2to1): x/d_1, w/d_2 -> y_d) + +test_expect_success '7b-setup: rename/rename(2to1), but only due to transitive rename' ' + test_create_repo 7b && + ( + cd 7b && + + mkdir z && + mkdir x && + mkdir w && + echo b >z/b && + echo c >z/c && + echo d1 > x/d && + echo d2 > w/d && + git add z x w && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv w/d y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7b-check: rename/rename(2to1), but only due to transitive rename' ' + ( + cd 7b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename)" out && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :2:y/d :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:w/d O:x/d && + test_cmp expect actual && + + test_path_is_missing y/d && + test_path_is_file y/d~HEAD && + test_path_is_file y/d~B^0 && + + git hash-object >actual \ + y/d~HEAD y/d~B^0 && + git rev-parse >expect \ + O:w/d O:x/d && + test_cmp expect actual + ) +' + +# Testcase 7c, rename/rename(1to...2or3); transitive rename may add complexity +# (Related to testcases 3b and 5c) +# Commit O: z/{b,c}, x/d +# Commit A: y/{b,c}, w/d +# Commit B: z/{b,c,d} +# Expected: y/{b,c}, CONFLICT(x/d -> w/d vs. y/d) +# NOTE: z/ was renamed to y/ so we do want to report +# neither CONFLICT(x/d -> w/d vs. z/d) +# nor CONFLiCT x/d -> w/d vs. y/d vs. z/d) + +test_expect_success '7c-setup: rename/rename(1to...2or3); transitive rename may add complexity' ' + test_create_repo 7c && + ( + cd 7c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv x w && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7c-check: rename/rename(1to...2or3); transitive rename may add complexity' ' + ( + cd 7c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*y/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :1:x/d :2:w/d :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d O:x/d O:x/d && + test_cmp expect actual + ) +' + +# Testcase 7d, transitive rename involved in rename/delete; how is it reported? +# (Related somewhat to testcases 5b and 8d) +# Commit O: z/{b,c}, x/d +# Commit A: y/{b,c} +# Commit B: z/{b,c,d} +# Expected: y/{b,c}, CONFLICT(delete x/d vs rename to y/d) +# NOTE: z->y so NOT CONFLICT(delete x/d vs rename to z/d) + +test_expect_success '7d-setup: transitive rename involved in rename/delete; how is it reported?' ' + test_create_repo 7d && + ( + cd 7d && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git rm -rf x && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7d-check: transitive rename involved in rename/delete; how is it reported?' ' + ( + cd 7d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d && + test_cmp expect actual + ) +' + +# Testcase 7e, transitive rename in rename/delete AND dirs in the way +# (Very similar to 'both rename source and destination involved in D/F conflict' from t6022-merge-rename.sh) +# (Also related to testcases 9c and 9d) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c,d/g}, x/d/f +# Commit B: z/{b,c,d_1} +# Expected: rename/delete(x/d_1->y/d_1 vs. None) + D/F conflict on y/d +# y/{b,c,d/g}, y/d_1~B^0, x/d/f + +# NOTE: The main path of interest here is d_1 and where it ends up, but +# this is actually a case that has two potential directory renames +# involved and D/F conflict(s), so it makes sense to walk through +# each step. +# +# Commit A renames z/ -> y/. Thus everything that B adds to z/ +# should be instead moved to y/. This gives us the D/F conflict on +# y/d because x/d_1 -> z/d_1 -> y/d_1 conflicts with y/d/g. +# +# Further, commit B renames x/ -> z/, thus everything A adds to x/ +# should instead be moved to z/...BUT we removed z/ and renamed it +# to y/, so maybe everything should move not from x/ to z/, but +# from x/ to z/ to y/. Doing so might make sense from the logic so +# far, but note that commit A had both an x/ and a y/; it did the +# renaming of z/ to y/ and created x/d/f and it clearly made these +# things separate, so it doesn't make much sense to push these +# together. Doing so is what I'd call a doubly transitive rename; +# see testcases 9c and 9d for further discussion of this issue and +# how it's resolved. + +test_expect_success '7e-setup: transitive rename in rename/delete AND dirs in the way' ' + test_create_repo 7e && + ( + cd 7e && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d1 >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git rm x/d && + mkdir -p x/d && + mkdir -p y/d && + echo f >x/d/f && + echo g >y/d/g && + git add x/d/f y/d/g && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7e-check: transitive rename in rename/delete AND dirs in the way' ' + ( + cd 7e && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :0:x/d/f :0:y/d/g :0:y/b :0:y/c :3:y/d && + git rev-parse >expect \ + A:x/d/f A:y/d/g O:z/b O:z/c O:x/d && + test_cmp expect actual && + + git hash-object y/d~B^0 >actual && + git rev-parse O:x/d >expect && + test_cmp expect actual + ) +' + +########################################################################### +# SECTION 8: Suboptimal merges +# +# As alluded to in the last section, the ruleset we have built up for +# detecting directory renames unfortunately has some special cases where it +# results in slightly suboptimal or non-intuitive behavior. This section +# explores these cases. +# +# To be fair, we already had non-intuitive or suboptimal behavior for most +# of these cases in git before introducing implicit directory rename +# detection, but it'd be nice if there was a modified ruleset out there +# that handled these cases a bit better. +########################################################################### + +# Testcase 8a, Dual-directory rename, one into the others' way +# Commit O. x/{a,b}, y/{c,d} +# Commit A. x/{a,b,e}, y/{c,d,f} +# Commit B. y/{a,b}, z/{c,d} +# +# Possible Resolutions: +# w/o dir-rename detection: y/{a,b,f}, z/{c,d}, x/e +# Currently expected: y/{a,b,e,f}, z/{c,d} +# Optimal: y/{a,b,e}, z/{c,d,f} +# +# Note: Both x and y got renamed and it'd be nice to detect both, and we do +# better with directory rename detection than git did without, but the +# simple rule from section 5 prevents me from handling this as optimally as +# we potentially could. + +test_expect_success '8a-setup: Dual-directory rename, one into the others way' ' + test_create_repo 8a && + ( + cd 8a && + + mkdir x && + mkdir y && + echo a >x/a && + echo b >x/b && + echo c >y/c && + echo d >y/d && + git add x y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e >x/e && + echo f >y/f && + git add x/e y/f && + test_tick && + git commit -m "A" && + + git checkout B && + git mv y z && + git mv x y && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8a-check: Dual-directory rename, one into the others way' ' + ( + cd 8a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/a HEAD:y/b HEAD:y/e HEAD:y/f HEAD:z/c HEAD:z/d && + git rev-parse >expect \ + O:x/a O:x/b A:x/e A:y/f O:y/c O:y/d && + test_cmp expect actual + ) +' + +# Testcase 8b, Dual-directory rename, one into the others' way, with conflicting filenames +# Commit O. x/{a_1,b_1}, y/{a_2,b_2} +# Commit A. x/{a_1,b_1,e_1}, y/{a_2,b_2,e_2} +# Commit B. y/{a_1,b_1}, z/{a_2,b_2} +# +# w/o dir-rename detection: y/{a_1,b_1,e_2}, z/{a_2,b_2}, x/e_1 +# Currently expected: <same> +# Scary: y/{a_1,b_1}, z/{a_2,b_2}, CONFLICT(add/add, e_1 vs. e_2) +# Optimal: y/{a_1,b_1,e_1}, z/{a_2,b_2,e_2} +# +# Note: Very similar to 8a, except instead of 'e' and 'f' in directories x and +# y, both are named 'e'. Without directory rename detection, neither file +# moves directories. Implement directory rename detection suboptimally, and +# you get an add/add conflict, but both files were added in commit A, so this +# is an add/add conflict where one side of history added both files -- +# something we can't represent in the index. Obviously, we'd prefer the last +# resolution, but our previous rules are too coarse to allow it. Using both +# the rules from section 4 and section 5 save us from the Scary resolution, +# making us fall back to pre-directory-rename-detection behavior for both +# e_1 and e_2. + +test_expect_success '8b-setup: Dual-directory rename, one into the others way, with conflicting filenames' ' + test_create_repo 8b && + ( + cd 8b && + + mkdir x && + mkdir y && + echo a1 >x/a && + echo b1 >x/b && + echo a2 >y/a && + echo b2 >y/b && + git add x y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e1 >x/e && + echo e2 >y/e && + git add x/e y/e && + test_tick && + git commit -m "A" && + + git checkout B && + git mv y z && + git mv x y && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8b-check: Dual-directory rename, one into the others way, with conflicting filenames' ' + ( + cd 8b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/a HEAD:y/b HEAD:z/a HEAD:z/b HEAD:x/e HEAD:y/e && + git rev-parse >expect \ + O:x/a O:x/b O:y/a O:y/b A:x/e A:y/e && + test_cmp expect actual + ) +' + +# Testcase 8c, modify/delete or rename+modify/delete? +# (Related to testcases 5b, 8d, and 9h) +# Commit O: z/{b,c,d} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d_modified,e} +# Expected: y/{b,c,e}, CONFLICT(modify/delete: on z/d) +# +# Note: It could easily be argued that the correct resolution here is +# y/{b,c,e}, CONFLICT(rename/delete: z/d -> y/d vs deleted) +# and that the modifed version of d should be present in y/ after +# the merge, just marked as conflicted. Indeed, I previously did +# argue that. But applying directory renames to the side of +# history where a file is merely modified results in spurious +# rename/rename(1to2) conflicts -- see testcase 9h. See also +# notes in 8d. + +test_expect_success '8c-setup: modify/delete or rename+modify/delete?' ' + test_create_repo 8c && + ( + cd 8c && + + mkdir z && + echo b >z/b && + echo c >z/c && + test_seq 1 10 >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/d && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo 11 >z/d && + test_chmod +x z/d && + echo e >z/e && + git add z/d z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8c-check: modify/delete or rename+modify/delete' ' + ( + cd 8c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (modify/delete).* z/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/e :1:z/d :3:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/e O:z/d B:z/d && + test_cmp expect actual && + + test_must_fail git rev-parse :2:z/d && + git ls-files -s z/d | grep ^100755 && + test_path_is_file z/d && + test_path_is_missing y/d + ) +' + +# Testcase 8d, rename/delete...or not? +# (Related to testcase 5b; these may appear slightly inconsistent to users; +# Also related to testcases 7d and 7e) +# Commit O: z/{b,c,d} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d,e} +# Expected: y/{b,c,e} +# +# Note: It would also be somewhat reasonable to resolve this as +# y/{b,c,e}, CONFLICT(rename/delete: x/d -> y/d or deleted) +# +# In this case, I'm leaning towards: commit A was the one that deleted z/d +# and it did the rename of z to y, so the two "conflicts" (rename vs. +# delete) are both coming from commit A, which is illogical. Conflicts +# during merging are supposed to be about opposite sides doing things +# differently. + +test_expect_success '8d-setup: rename/delete...or not?' ' + test_create_repo 8d && + ( + cd 8d && + + mkdir z && + echo b >z/b && + echo c >z/c && + test_seq 1 10 >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/d && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo e >z/e && + git add z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8d-check: rename/delete...or not?' ' + ( + cd 8d && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/e && + test_cmp expect actual + ) +' + +# Testcase 8e, Both sides rename, one side adds to original directory +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: w/{b,c}, z/d +# +# Possible Resolutions: +# w/o dir-rename detection: z/d, CONFLICT(z/b -> y/b vs. w/b), +# CONFLICT(z/c -> y/c vs. w/c) +# Currently expected: y/d, CONFLICT(z/b -> y/b vs. w/b), +# CONFLICT(z/c -> y/c vs. w/c) +# Optimal: ?? +# +# Notes: In commit A, directory z got renamed to y. In commit B, directory z +# did NOT get renamed; the directory is still present; instead it is +# considered to have just renamed a subset of paths in directory z +# elsewhere. Therefore, the directory rename done in commit A to z/ +# applies to z/d and maps it to y/d. +# +# It's possible that users would get confused about this, but what +# should we do instead? Silently leaving at z/d seems just as bad or +# maybe even worse. Perhaps we could print a big warning about z/d +# and how we're moving to y/d in this case, but when I started thinking +# about the ramifications of doing that, I didn't know how to rule out +# that opening other weird edge and corner cases so I just punted. + +test_expect_success '8e-setup: Both sides rename, one side adds to original directory' ' + test_create_repo 8e && + ( + cd 8e && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z w && + mkdir z && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8e-check: Both sides rename, one side adds to original directory' ' + ( + cd 8e && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep CONFLICT.*rename/rename.*z/c.*y/c.*w/c out && + test_i18ngrep CONFLICT.*rename/rename.*z/b.*y/b.*w/b out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :1:z/b :2:y/b :3:w/b :1:z/c :2:y/c :3:w/c :0:y/d && + git rev-parse >expect \ + O:z/b O:z/b O:z/b O:z/c O:z/c O:z/c B:z/d && + test_cmp expect actual && + + git hash-object >actual \ + y/b w/b y/c w/c && + git rev-parse >expect \ + O:z/b O:z/b O:z/c O:z/c && + test_cmp expect actual && + + test_path_is_missing z/b && + test_path_is_missing z/c + ) +' + +########################################################################### +# SECTION 9: Other testcases +# +# This section consists of miscellaneous testcases I thought of during +# the implementation which round out the testing. +########################################################################### + +# Testcase 9a, Inner renamed directory within outer renamed directory +# (Related to testcase 1f) +# Commit O: z/{b,c,d/{e,f,g}} +# Commit A: y/{b,c}, x/w/{e,f,g} +# Commit B: z/{b,c,d/{e,f,g,h},i} +# Expected: y/{b,c,i}, x/w/{e,f,g,h} +# NOTE: The only reason this one is interesting is because when a directory +# is split into multiple other directories, we determine by the weight +# of which one had the most paths going to it. A naive implementation +# of that could take the new file in commit B at z/i to x/w/i or x/i. + +test_expect_success '9a-setup: Inner renamed directory within outer renamed directory' ' + test_create_repo 9a && + ( + cd 9a && + + mkdir -p z/d && + echo b >z/b && + echo c >z/c && + echo e >z/d/e && + echo f >z/d/f && + echo g >z/d/g && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir x && + git mv z/d x/w && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo h >z/d/h && + echo i >z/i && + git add z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9a-check: Inner renamed directory within outer renamed directory' ' + ( + cd 9a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/i && + git rev-parse >expect \ + O:z/b O:z/c B:z/i && + test_cmp expect actual && + + git rev-parse >actual \ + HEAD:x/w/e HEAD:x/w/f HEAD:x/w/g HEAD:x/w/h && + git rev-parse >expect \ + O:z/d/e O:z/d/f O:z/d/g B:z/d/h && + test_cmp expect actual + ) +' + +# Testcase 9b, Transitive rename with content merge +# (Related to testcase 1c) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c}, x/d_2 +# Commit B: z/{b,c,d_3} +# Expected: y/{b,c,d_merged} + +test_expect_success '9b-setup: Transitive rename with content merge' ' + test_create_repo 9b && + ( + cd 9b && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + test_seq 1 10 >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_seq 1 11 >x/d && + git add x/d && + test_tick && + git commit -m "A" && + + git checkout B && + test_seq 0 10 >x/d && + git mv x/d z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9b-check: Transitive rename with content merge' ' + ( + cd 9b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + test_seq 0 11 >expected && + test_cmp expected y/d && + git add expected && + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d && + git rev-parse >expect \ + O:z/b O:z/c :0:expected && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:x/d && + test_must_fail git rev-parse HEAD:z/d && + test_path_is_missing z/d && + + test $(git rev-parse HEAD:y/d) != $(git rev-parse O:x/d) && + test $(git rev-parse HEAD:y/d) != $(git rev-parse A:x/d) && + test $(git rev-parse HEAD:y/d) != $(git rev-parse B:z/d) + ) +' + +# Testcase 9c, Doubly transitive rename? +# (Related to testcase 1c, 7e, and 9d) +# Commit O: z/{b,c}, x/{d,e}, w/f +# Commit A: y/{b,c}, x/{d,e,f,g} +# Commit B: z/{b,c,d,e}, w/f +# Expected: y/{b,c,d,e}, x/{f,g} +# +# NOTE: x/f and x/g may be slightly confusing here. The rename from w/f to +# x/f is clear. Let's look beyond that. Here's the logic: +# Commit B renamed x/ -> z/ +# Commit A renamed z/ -> y/ +# So, we could possibly further rename x/f to z/f to y/f, a doubly +# transient rename. However, where does it end? We can chain these +# indefinitely (see testcase 9d). What if there is a D/F conflict +# at z/f/ or y/f/? Or just another file conflict at one of those +# paths? In the case of an N-long chain of transient renamings, +# where do we "abort" the rename at? Can the user make sense of +# the resulting conflict and resolve it? +# +# To avoid this confusion I use the simple rule that if the other side +# of history did a directory rename to a path that your side renamed +# away, then ignore that particular rename from the other side of +# history for any implicit directory renames. + +test_expect_success '9c-setup: Doubly transitive rename?' ' + test_create_repo 9c && + ( + cd 9c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + echo e >x/e && + mkdir w && + echo f >w/f && + git add z x w && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv w/f x/ && + echo g >x/g && + git add x/g && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/d && + git mv x/e z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9c-check: Doubly transitive rename?' ' + ( + cd 9c && + + git checkout A^0 && + + git merge -s recursive B^0 >out && + test_i18ngrep "WARNING: Avoiding applying x -> z rename to x/f" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:y/e HEAD:x/f HEAD:x/g && + git rev-parse >expect \ + O:z/b O:z/c O:x/d O:x/e O:w/f A:x/g && + test_cmp expect actual + ) +' + +# Testcase 9d, N-fold transitive rename? +# (Related to testcase 9c...and 1c and 7e) +# Commit O: z/a, y/b, x/c, w/d, v/e, u/f +# Commit A: y/{a,b}, w/{c,d}, u/{e,f} +# Commit B: z/{a,t}, x/{b,c}, v/{d,e}, u/f +# Expected: <see NOTE first> +# +# NOTE: z/ -> y/ (in commit A) +# y/ -> x/ (in commit B) +# x/ -> w/ (in commit A) +# w/ -> v/ (in commit B) +# v/ -> u/ (in commit A) +# So, if we add a file to z, say z/t, where should it end up? In u? +# What if there's another file or directory named 't' in one of the +# intervening directories and/or in u itself? Also, shouldn't the +# same logic that places 't' in u/ also move ALL other files to u/? +# What if there are file or directory conflicts in any of them? If +# we attempted to do N-way (N-fold? N-ary? N-uple?) transitive renames +# like this, would the user have any hope of understanding any +# conflicts or how their working tree ended up? I think not, so I'm +# ruling out N-ary transitive renames for N>1. +# +# Therefore our expected result is: +# z/t, y/a, x/b, w/c, u/d, u/e, u/f +# The reason that v/d DOES get transitively renamed to u/d is that u/ isn't +# renamed somewhere. A slightly sub-optimal result, but it uses fairly +# simple rules that are consistent with what we need for all the other +# testcases and simplifies things for the user. + +test_expect_success '9d-setup: N-way transitive rename?' ' + test_create_repo 9d && + ( + cd 9d && + + mkdir z y x w v u && + echo a >z/a && + echo b >y/b && + echo c >x/c && + echo d >w/d && + echo e >v/e && + echo f >u/f && + git add z y x w v u && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/a y/ && + git mv x/c w/ && + git mv v/e u/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo t >z/t && + git mv y/b x/ && + git mv w/d v/ && + git add z/t && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9d-check: N-way transitive rename?' ' + ( + cd 9d && + + git checkout A^0 && + + git merge -s recursive B^0 >out && + test_i18ngrep "WARNING: Avoiding applying z -> y rename to z/t" out && + test_i18ngrep "WARNING: Avoiding applying y -> x rename to y/a" out && + test_i18ngrep "WARNING: Avoiding applying x -> w rename to x/b" out && + test_i18ngrep "WARNING: Avoiding applying w -> v rename to w/c" out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:z/t \ + HEAD:y/a HEAD:x/b HEAD:w/c \ + HEAD:u/d HEAD:u/e HEAD:u/f && + git rev-parse >expect \ + B:z/t \ + O:z/a O:y/b O:x/c \ + O:w/d O:v/e A:u/f && + test_cmp expect actual + ) +' + +# Testcase 9e, N-to-1 whammo +# (Related to testcase 9c...and 1c and 7e) +# Commit O: dir1/{a,b}, dir2/{d,e}, dir3/{g,h}, dirN/{j,k} +# Commit A: dir1/{a,b,c,yo}, dir2/{d,e,f,yo}, dir3/{g,h,i,yo}, dirN/{j,k,l,yo} +# Commit B: combined/{a,b,d,e,g,h,j,k} +# Expected: combined/{a,b,c,d,e,f,g,h,i,j,k,l}, CONFLICT(Nto1) warnings, +# dir1/yo, dir2/yo, dir3/yo, dirN/yo + +test_expect_success '9e-setup: N-to-1 whammo' ' + test_create_repo 9e && + ( + cd 9e && + + mkdir dir1 dir2 dir3 dirN && + echo a >dir1/a && + echo b >dir1/b && + echo d >dir2/d && + echo e >dir2/e && + echo g >dir3/g && + echo h >dir3/h && + echo j >dirN/j && + echo k >dirN/k && + git add dir* && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo c >dir1/c && + echo yo >dir1/yo && + echo f >dir2/f && + echo yo >dir2/yo && + echo i >dir3/i && + echo yo >dir3/yo && + echo l >dirN/l && + echo yo >dirN/yo && + git add dir* && + test_tick && + git commit -m "A" && + + git checkout B && + git mv dir1 combined && + git mv dir2/* combined/ && + git mv dir3/* combined/ && + git mv dirN/* combined/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success C_LOCALE_OUTPUT '9e-check: N-to-1 whammo' ' + ( + cd 9e && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + grep "CONFLICT (implicit dir rename): Cannot map more than one path to combined/yo" out >error_line && + grep -q dir1/yo error_line && + grep -q dir2/yo error_line && + grep -q dir3/yo error_line && + grep -q dirN/yo error_line && + + git ls-files -s >out && + test_line_count = 16 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :0:combined/a :0:combined/b :0:combined/c \ + :0:combined/d :0:combined/e :0:combined/f \ + :0:combined/g :0:combined/h :0:combined/i \ + :0:combined/j :0:combined/k :0:combined/l && + git rev-parse >expect \ + O:dir1/a O:dir1/b A:dir1/c \ + O:dir2/d O:dir2/e A:dir2/f \ + O:dir3/g O:dir3/h A:dir3/i \ + O:dirN/j O:dirN/k A:dirN/l && + test_cmp expect actual && + + git rev-parse >actual \ + :0:dir1/yo :0:dir2/yo :0:dir3/yo :0:dirN/yo && + git rev-parse >expect \ + A:dir1/yo A:dir2/yo A:dir3/yo A:dirN/yo && + test_cmp expect actual + ) +' + +# Testcase 9f, Renamed directory that only contained immediate subdirs +# (Related to testcases 1e & 9g) +# Commit O: goal/{a,b}/$more_files +# Commit A: priority/{a,b}/$more_files +# Commit B: goal/{a,b}/$more_files, goal/c +# Expected: priority/{a,b}/$more_files, priority/c + +test_expect_success '9f-setup: Renamed directory that only contained immediate subdirs' ' + test_create_repo 9f && + ( + cd 9f && + + mkdir -p goal/a && + mkdir -p goal/b && + echo foo >goal/a/foo && + echo bar >goal/b/bar && + echo baz >goal/b/baz && + git add goal && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv goal/ priority && + test_tick && + git commit -m "A" && + + git checkout B && + echo c >goal/c && + git add goal/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9f-check: Renamed directory that only contained immediate subdirs' ' + ( + cd 9f && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:priority/a/foo \ + HEAD:priority/b/bar \ + HEAD:priority/b/baz \ + HEAD:priority/c && + git rev-parse >expect \ + O:goal/a/foo \ + O:goal/b/bar \ + O:goal/b/baz \ + B:goal/c && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:goal/c + ) +' + +# Testcase 9g, Renamed directory that only contained immediate subdirs, immediate subdirs renamed +# (Related to testcases 1e & 9f) +# Commit O: goal/{a,b}/$more_files +# Commit A: priority/{alpha,bravo}/$more_files +# Commit B: goal/{a,b}/$more_files, goal/c +# Expected: priority/{alpha,bravo}/$more_files, priority/c + +test_expect_success '9g-setup: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' + test_create_repo 9g && + ( + cd 9g && + + mkdir -p goal/a && + mkdir -p goal/b && + echo foo >goal/a/foo && + echo bar >goal/b/bar && + echo baz >goal/b/baz && + git add goal && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir priority && + git mv goal/a/ priority/alpha && + git mv goal/b/ priority/beta && + rmdir goal/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo c >goal/c && + git add goal/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_failure '9g-check: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' + ( + cd 9g && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:priority/alpha/foo \ + HEAD:priority/beta/bar \ + HEAD:priority/beta/baz \ + HEAD:priority/c && + git rev-parse >expect \ + O:goal/a/foo \ + O:goal/b/bar \ + O:goal/b/baz \ + B:goal/c && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:goal/c + ) +' + +# Testcase 9h, Avoid implicit rename if involved as source on other side +# (Extremely closely related to testcase 3a) +# Commit O: z/{b,c,d_1} +# Commit A: z/{b,c,d_2} +# Commit B: y/{b,c}, x/d_1 +# Expected: y/{b,c}, x/d_2 +# NOTE: If we applied the z/ -> y/ rename to z/d, then we'd end up with +# a rename/rename(1to2) conflict (z/d -> y/d vs. x/d) +test_expect_success '9h-setup: Avoid dir rename on merely modified path' ' + test_create_repo 9h && + ( + cd 9h && + + mkdir z && + echo b >z/b && + echo c >z/c && + printf "1\n2\n3\n4\n5\n6\n7\n8\nd\n" >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + echo more >>z/d && + git add z/d && + git commit -m "A" && + + git checkout B && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9h-check: Avoid dir rename on merely modified path' ' + ( + cd 9h && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:x/d && + git rev-parse >expect \ + O:z/b O:z/c A:z/d && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 9: +# +# If the other side of history did a directory rename to a path that your +# side renamed away, then ignore that particular rename from the other +# side of history for any implicit directory renames. +########################################################################### + +########################################################################### +# SECTION 10: Handling untracked files +# +# unpack_trees(), upon which the recursive merge algorithm is based, aborts +# the operation if untracked or dirty files would be deleted or overwritten +# by the merge. Unfortunately, unpack_trees() does not understand renames, +# and if it doesn't abort, then it muddies up the working directory before +# we even get to the point of detecting renames, so we need some special +# handling, at least in the case of directory renames. +########################################################################### + +# Testcase 10a, Overwrite untracked: normal rename/delete +# Commit O: z/{b,c_1} +# Commit A: z/b + untracked z/c + untracked z/d +# Commit B: z/{b,d_1} +# Expected: Aborted Merge + +# ERROR_MSG(untracked working tree files would be overwritten by merge) + +test_expect_success '10a-setup: Overwrite untracked with normal rename/delete' ' + test_create_repo 10a && + ( + cd 10a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/c z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10a-check: Overwrite untracked with normal rename/delete' ' + ( + cd 10a && + + git checkout A^0 && + echo very >z/c && + echo important >z/d && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "The following untracked working tree files would be overwritten by merge" err && + + git ls-files -s >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 4 out && + + echo very >expect && + test_cmp expect z/c && + + echo important >expect && + test_cmp expect z/d && + + git rev-parse HEAD:z/b >actual && + git rev-parse O:z/b >expect && + test_cmp expect actual + ) +' + +# Testcase 10b, Overwrite untracked: dir rename + delete +# Commit O: z/{b,c_1} +# Commit A: y/b + untracked y/{c,d,e} +# Commit B: z/{b,d_1,e} +# Expected: Failed Merge; y/b + untracked y/c + untracked y/d on disk + +# z/c_1 -> z/d_1 rename recorded at stage 3 for y/d + +# ERROR_MSG(refusing to lose untracked file at 'y/d') + +test_expect_success '10b-setup: Overwrite untracked with dir rename + delete' ' + test_create_repo 10b && + ( + cd 10b && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/c && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/c z/d && + echo e >z/e && + git add z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10b-check: Overwrite untracked with dir rename + delete' ' + ( + cd 10b && + + git checkout A^0 && + echo very >y/c && + echo important >y/d && + echo contents >y/e && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/delete).*Version B\^0 of y/d left in tree at y/d~B\^0" out && + test_i18ngrep "Error: Refusing to lose untracked file at y/e; writing to y/e~B\^0 instead" out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 5 out && + + git rev-parse >actual \ + :0:y/b :3:y/d :3:y/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/e && + test_cmp expect actual && + + echo very >expect && + test_cmp expect y/c && + + echo important >expect && + test_cmp expect y/d && + + echo contents >expect && + test_cmp expect y/e + ) +' + +# Testcase 10c, Overwrite untracked: dir rename/rename(1to2) +# Commit O: z/{a,b}, x/{c,d} +# Commit A: y/{a,b}, w/c, x/d + different untracked y/c +# Commit B: z/{a,b,c}, x/d +# Expected: Failed Merge; y/{a,b} + x/d + untracked y/c + +# CONFLICT(rename/rename) x/c -> w/c vs y/c + +# y/c~B^0 + +# ERROR_MSG(Refusing to lose untracked file at y/c) + +test_expect_success '10c-setup: Overwrite untracked with dir rename/rename(1to2)' ' + test_create_repo 10c && + ( + cd 10c && + + mkdir z x && + echo a >z/a && + echo b >z/b && + echo c >x/c && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir w && + git mv x/c w/c && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/c z/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2)' ' + ( + cd 10c && + + git checkout A^0 && + echo important >y/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose untracked file at y/c; adding as y/c~B\^0 instead" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:x/d :1:x/c :2:w/c :3:y/c && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/c O:x/c O:x/c && + test_cmp expect actual && + + git hash-object y/c~B^0 >actual && + git rev-parse O:x/c >expect && + test_cmp expect actual && + + echo important >expect && + test_cmp expect y/c + ) +' + +# Testcase 10d, Delete untracked w/ dir rename/rename(2to1) +# Commit O: z/{a,b,c_1}, x/{d,e,f_2} +# Commit A: y/{a,b}, x/{d,e,f_2,wham_1} + untracked y/wham +# Commit B: z/{a,b,c_1,wham_2}, y/{d,e} +# Expected: Failed Merge; y/{a,b,d,e} + untracked y/{wham,wham~B^0,wham~HEAD}+ +# CONFLICT(rename/rename) z/c_1 vs x/f_2 -> y/wham +# ERROR_MSG(Refusing to lose untracked file at y/wham) + +test_expect_success '10d-setup: Delete untracked with dir rename/rename(2to1)' ' + test_create_repo 10d && + ( + cd 10d && + + mkdir z x && + echo a >z/a && + echo b >z/b && + echo c >z/c && + echo d >x/d && + echo e >x/e && + echo f >x/f && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/c x/wham && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/f z/wham && + git mv x/ y/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' + ( + cd 10d && + + git checkout A^0 && + echo important >y/wham && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose untracked file at y/wham" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 4 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:y/d :0:y/e :2:y/wham :3:y/wham && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/e O:z/c O:x/f && + test_cmp expect actual && + + test_must_fail git rev-parse :1:y/wham && + + echo important >expect && + test_cmp expect y/wham && + + git hash-object >actual \ + y/wham~B^0 y/wham~HEAD && + git rev-parse >expect \ + O:x/f O:z/c && + test_cmp expect actual + ) +' + +# Testcase 10e, Does git complain about untracked file that's not in the way? +# Commit O: z/{a,b} +# Commit A: y/{a,b} + untracked z/c +# Commit B: z/{a,b,c} +# Expected: y/{a,b,c} + untracked z/c + +test_expect_success '10e-setup: Does git complain about untracked file that is not really in the way?' ' + test_create_repo 10e && + ( + cd 10e && + + mkdir z && + echo a >z/a && + echo b >z/b && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo c >z/c && + git add z/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_failure '10e-check: Does git complain about untracked file that is not really in the way?' ' + ( + cd 10e && + + git checkout A^0 && + mkdir z && + echo random >z/c && + + git merge -s recursive B^0 >out 2>err && + test_i18ngrep ! "following untracked working tree files would be overwritten by merge" err && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:y/c && + git rev-parse >expect \ + O:z/a O:z/b B:z/c && + test_cmp expect actual && + + echo random >expect && + test_cmp expect z/c + ) +' + +########################################################################### +# SECTION 11: Handling dirty (not up-to-date) files +# +# unpack_trees(), upon which the recursive merge algorithm is based, aborts +# the operation if untracked or dirty files would be deleted or overwritten +# by the merge. Unfortunately, unpack_trees() does not understand renames, +# and if it doesn't abort, then it muddies up the working directory before +# we even get to the point of detecting renames, so we need some special +# handling. This was true even of normal renames, but there are additional +# codepaths that need special handling with directory renames. Add +# testcases for both renamed-by-directory-rename-detection and standard +# rename cases. +########################################################################### + +# Testcase 11a, Avoid losing dirty contents with simple rename +# Commit O: z/{a,b_v1}, +# Commit A: z/{a,c_v1}, and z/c_v1 has uncommitted mods +# Commit B: z/{a,b_v2} +# Expected: ERROR_MSG(Refusing to lose dirty file at z/c) + +# z/a, staged version of z/c has sha1sum matching B:z/b_v2, +# z/c~HEAD with contents of B:z/b_v2, +# z/c with uncommitted mods on top of A:z/c_v1 + +test_expect_success '11a-setup: Avoid losing dirty contents with simple rename' ' + test_create_repo 11a && + ( + cd 11a && + + mkdir z && + echo a >z/a && + test_seq 1 10 >z/b && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/b z/c && + test_tick && + git commit -m "A" && + + git checkout B && + echo 11 >>z/b && + git add z/b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11a-check: Avoid losing dirty contents with simple rename' ' + ( + cd 11a && + + git checkout A^0 && + echo stuff >>z/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "Refusing to lose dirty file at z/c" out && + + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected z/c && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 4 out && + + git rev-parse >actual \ + :0:z/a :2:z/c && + git rev-parse >expect \ + O:z/a B:z/b && + test_cmp expect actual && + + git hash-object z/c~HEAD >actual && + git rev-parse B:z/b >expect && + test_cmp expect actual + ) +' + +# Testcase 11b, Avoid losing dirty file involved in directory rename +# Commit O: z/a, x/{b,c_v1} +# Commit A: z/{a,c_v1}, x/b, and z/c_v1 has uncommitted mods +# Commit B: y/a, x/{b,c_v2} +# Expected: y/{a,c_v2}, x/b, z/c_v1 with uncommitted mods untracked, +# ERROR_MSG(Refusing to lose dirty file at z/c) + + +test_expect_success '11b-setup: Avoid losing dirty file involved in directory rename' ' + test_create_repo 11b && + ( + cd 11b && + + mkdir z x && + echo a >z/a && + echo b >x/b && + test_seq 1 10 >x/c && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x/c z/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z y && + echo 11 >>x/c && + git add x/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11b-check: Avoid losing dirty file involved in directory rename' ' + ( + cd 11b && + + git checkout A^0 && + echo stuff >>z/c && + + git merge -s recursive B^0 >out 2>err && + test_i18ngrep "Refusing to lose dirty file at z/c" out && + + grep -q stuff z/c && + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected z/c && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -m >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 4 out && + + git rev-parse >actual \ + :0:x/b :0:y/a :0:y/c && + git rev-parse >expect \ + O:x/b O:z/a B:x/c && + test_cmp expect actual && + + git hash-object y/c >actual && + git rev-parse B:x/c >expect && + test_cmp expect actual + ) +' + +# Testcase 11c, Avoid losing not-up-to-date with rename + D/F conflict +# Commit O: y/a, x/{b,c_v1} +# Commit A: y/{a,c_v1}, x/b, and y/c_v1 has uncommitted mods +# Commit B: y/{a,c/d}, x/{b,c_v2} +# Expected: Abort_msg("following files would be overwritten by merge") + +# y/c left untouched (still has uncommitted mods) + +test_expect_success '11c-setup: Avoid losing not-uptodate with rename + D/F conflict' ' + test_create_repo 11c && + ( + cd 11c && + + mkdir y x && + echo a >y/a && + echo b >x/b && + test_seq 1 10 >x/c && + git add y x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x/c y/c && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y/c && + echo d >y/c/d && + echo 11 >>x/c && + git add x/c y/c/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11c-check: Avoid losing not-uptodate with rename + D/F conflict' ' + ( + cd 11c && + + git checkout A^0 && + echo stuff >>y/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "following files would be overwritten by merge" err && + + grep -q stuff y/c && + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected y/c && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -m >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 3 out + ) +' + +# Testcase 11d, Avoid losing not-up-to-date with rename + D/F conflict +# Commit O: z/a, x/{b,c_v1} +# Commit A: z/{a,c_v1}, x/b, and z/c_v1 has uncommitted mods +# Commit B: y/{a,c/d}, x/{b,c_v2} +# Expected: D/F: y/c_v2 vs y/c/d) + +# Warning_Msg("Refusing to lose dirty file at z/c) + +# y/{a,c~HEAD,c/d}, x/b, now-untracked z/c_v1 with uncommitted mods + +test_expect_success '11d-setup: Avoid losing not-uptodate with rename + D/F conflict' ' + test_create_repo 11d && + ( + cd 11d && + + mkdir z x && + echo a >z/a && + echo b >x/b && + test_seq 1 10 >x/c && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x/c z/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z y && + mkdir y/c && + echo d >y/c/d && + echo 11 >>x/c && + git add x/c y/c/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11d-check: Avoid losing not-uptodate with rename + D/F conflict' ' + ( + cd 11d && + + git checkout A^0 && + echo stuff >>z/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "Refusing to lose dirty file at z/c" out && + + grep -q stuff z/c && + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected z/c + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 5 out && + + git rev-parse >actual \ + :0:x/b :0:y/a :0:y/c/d :3:y/c && + git rev-parse >expect \ + O:x/b O:z/a B:y/c/d B:x/c && + test_cmp expect actual && + + git hash-object y/c~HEAD >actual && + git rev-parse B:x/c >expect && + test_cmp expect actual + ) +' + +# Testcase 11e, Avoid deleting not-up-to-date with dir rename/rename(1to2)/add +# Commit O: z/{a,b}, x/{c_1,d} +# Commit A: y/{a,b,c_2}, x/d, w/c_1, and y/c_2 has uncommitted mods +# Commit B: z/{a,b,c_1}, x/d +# Expected: Failed Merge; y/{a,b} + x/d + +# CONFLICT(rename/rename) x/c_1 -> w/c_1 vs y/c_1 + +# ERROR_MSG(Refusing to lose dirty file at y/c) +# y/c~B^0 has O:x/c_1 contents +# y/c~HEAD has A:y/c_2 contents +# y/c has dirty file from before merge + +test_expect_success '11e-setup: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' + test_create_repo 11e && + ( + cd 11e && + + mkdir z x && + echo a >z/a && + echo b >z/b && + echo c >x/c && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/ y/ && + echo different >y/c && + mkdir w && + git mv x/c w/ && + git add y/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/c z/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' + ( + cd 11e && + + git checkout A^0 && + echo mods >>y/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose dirty file at y/c" out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 4 out && + git ls-files -o >out && + test_line_count = 4 out && + + echo different >expected && + echo mods >>expected && + test_cmp expected y/c && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:x/d :1:x/c :2:w/c :2:y/c :3:y/c && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/c O:x/c A:y/c O:x/c && + test_cmp expect actual && + + git hash-object >actual \ + y/c~B^0 y/c~HEAD && + git rev-parse >expect \ + O:x/c A:y/c && + test_cmp expect actual + ) +' + +# Testcase 11f, Avoid deleting not-up-to-date w/ dir rename/rename(2to1) +# Commit O: z/{a,b}, x/{c_1,d_2} +# Commit A: y/{a,b,wham_1}, x/d_2, except y/wham has uncommitted mods +# Commit B: z/{a,b,wham_2}, x/c_1 +# Expected: Failed Merge; y/{a,b} + untracked y/{wham~B^0,wham~B^HEAD} + +# y/wham with dirty changes from before merge + +# CONFLICT(rename/rename) x/c vs x/d -> y/wham +# ERROR_MSG(Refusing to lose dirty file at y/wham) + +test_expect_success '11f-setup: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' + test_create_repo 11f && + ( + cd 11f && + + mkdir z x && + echo a >z/a && + echo b >z/b && + test_seq 1 10 >x/c && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/ y/ && + git mv x/c y/wham && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/wham && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' + ( + cd 11f && + + git checkout A^0 && + echo important >>y/wham && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose dirty file at y/wham" out && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 4 out && + + test_seq 1 10 >expected && + echo important >>expected && + test_cmp expected y/wham && + + test_must_fail git rev-parse :1:y/wham && + git hash-object >actual \ + y/wham~B^0 y/wham~HEAD && + git rev-parse >expect \ + O:x/d O:x/c && + test_cmp expect actual && + + git rev-parse >actual \ + :0:y/a :0:y/b :2:y/wham :3:y/wham && + git rev-parse >expect \ + O:z/a O:z/b O:x/c O:x/d && + test_cmp expect actual + ) +' + +########################################################################### +# SECTION 12: Everything else +# +# Tests suggested by others. Tests added after implementation completed +# and submitted. Grab bag. +########################################################################### + +# Testcase 12a, Moving one directory hierarchy into another +# (Related to testcase 9a) +# Commit O: node1/{leaf1,leaf2}, node2/{leaf3,leaf4} +# Commit A: node1/{leaf1,leaf2,node2/{leaf3,leaf4}} +# Commit B: node1/{leaf1,leaf2,leaf5}, node2/{leaf3,leaf4,leaf6} +# Expected: node1/{leaf1,leaf2,leaf5,node2/{leaf3,leaf4,leaf6}} + +test_expect_success '12a-setup: Moving one directory hierarchy into another' ' + test_create_repo 12a && + ( + cd 12a && + + mkdir -p node1 node2 && + echo leaf1 >node1/leaf1 && + echo leaf2 >node1/leaf2 && + echo leaf3 >node2/leaf3 && + echo leaf4 >node2/leaf4 && + git add node1 node2 && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv node2/ node1/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo leaf5 >node1/leaf5 && + echo leaf6 >node2/leaf6 && + git add node1 node2 && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '12a-check: Moving one directory hierarchy into another' ' + ( + cd 12a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + + git rev-parse >actual \ + HEAD:node1/leaf1 HEAD:node1/leaf2 HEAD:node1/leaf5 \ + HEAD:node1/node2/leaf3 \ + HEAD:node1/node2/leaf4 \ + HEAD:node1/node2/leaf6 && + git rev-parse >expect \ + O:node1/leaf1 O:node1/leaf2 B:node1/leaf5 \ + O:node2/leaf3 \ + O:node2/leaf4 \ + B:node2/leaf6 && + test_cmp expect actual + ) +' + +# Testcase 12b, Moving two directory hierarchies into each other +# (Related to testcases 1c and 12c) +# Commit O: node1/{leaf1, leaf2}, node2/{leaf3, leaf4} +# Commit A: node1/{leaf1, leaf2, node2/{leaf3, leaf4}} +# Commit B: node2/{leaf3, leaf4, node1/{leaf1, leaf2}} +# Expected: node1/node2/node1/{leaf1, leaf2}, +# node2/node1/node2/{leaf3, leaf4} +# NOTE: Without directory renames, we would expect +# node2/node1/{leaf1, leaf2}, +# node1/node2/{leaf3, leaf4} +# with directory rename detection, we note that +# commit A renames node2/ -> node1/node2/ +# commit B renames node1/ -> node2/node1/ +# therefore, applying those directory renames to the initial result +# (making all four paths experience a transitive renaming), yields +# the expected result. +# +# You may ask, is it weird to have two directories rename each other? +# To which, I can do no more than shrug my shoulders and say that +# even simple rules give weird results when given weird inputs. + +test_expect_success '12b-setup: Moving one directory hierarchy into another' ' + test_create_repo 12b && + ( + cd 12b && + + mkdir -p node1 node2 && + echo leaf1 >node1/leaf1 && + echo leaf2 >node1/leaf2 && + echo leaf3 >node2/leaf3 && + echo leaf4 >node2/leaf4 && + git add node1 node2 && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv node2/ node1/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv node1/ node2/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '12b-check: Moving one directory hierarchy into another' ' + ( + cd 12b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:node1/node2/node1/leaf1 \ + HEAD:node1/node2/node1/leaf2 \ + HEAD:node2/node1/node2/leaf3 \ + HEAD:node2/node1/node2/leaf4 && + git rev-parse >expect \ + O:node1/leaf1 \ + O:node1/leaf2 \ + O:node2/leaf3 \ + O:node2/leaf4 && + test_cmp expect actual + ) +' + +# Testcase 12c, Moving two directory hierarchies into each other w/ content merge +# (Related to testcase 12b) +# Commit O: node1/{ leaf1_1, leaf2_1}, node2/{leaf3_1, leaf4_1} +# Commit A: node1/{ leaf1_2, leaf2_2, node2/{leaf3_2, leaf4_2}} +# Commit B: node2/{node1/{leaf1_3, leaf2_3}, leaf3_3, leaf4_3} +# Expected: Content merge conflicts for each of: +# node1/node2/node1/{leaf1, leaf2}, +# node2/node1/node2/{leaf3, leaf4} +# NOTE: This is *exactly* like 12c, except that every path is modified on +# each side of the merge. + +test_expect_success '12c-setup: Moving one directory hierarchy into another w/ content merge' ' + test_create_repo 12c && + ( + cd 12c && + + mkdir -p node1 node2 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf1\n" >node1/leaf1 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf2\n" >node1/leaf2 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf3\n" >node2/leaf3 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf4\n" >node2/leaf4 && + git add node1 node2 && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv node2/ node1/ && + for i in `git ls-files`; do echo side A >>$i; done && + git add -u && + test_tick && + git commit -m "A" && + + git checkout B && + git mv node1/ node2/ && + for i in `git ls-files`; do echo side B >>$i; done && + git add -u && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '12c-check: Moving one directory hierarchy into another w/ content merge' ' + ( + cd 12c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 && + + git ls-files -u >out && + test_line_count = 12 out && + + git rev-parse >actual \ + :1:node1/node2/node1/leaf1 \ + :1:node1/node2/node1/leaf2 \ + :1:node2/node1/node2/leaf3 \ + :1:node2/node1/node2/leaf4 \ + :2:node1/node2/node1/leaf1 \ + :2:node1/node2/node1/leaf2 \ + :2:node2/node1/node2/leaf3 \ + :2:node2/node1/node2/leaf4 \ + :3:node1/node2/node1/leaf1 \ + :3:node1/node2/node1/leaf2 \ + :3:node2/node1/node2/leaf3 \ + :3:node2/node1/node2/leaf4 && + git rev-parse >expect \ + O:node1/leaf1 \ + O:node1/leaf2 \ + O:node2/leaf3 \ + O:node2/leaf4 \ + A:node1/leaf1 \ + A:node1/leaf2 \ + A:node1/node2/leaf3 \ + A:node1/node2/leaf4 \ + B:node2/node1/leaf1 \ + B:node2/node1/leaf2 \ + B:node2/leaf3 \ + B:node2/leaf4 && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t6044-merge-unrelated-index-changes.sh b/t/t6044-merge-unrelated-index-changes.sh index 01023486c5..23b86fb977 100755 --- a/t/t6044-merge-unrelated-index-changes.sh +++ b/t/t6044-merge-unrelated-index-changes.sh @@ -6,18 +6,21 @@ test_description="merges with unrelated index changes" # Testcase for some simple merges # A -# o-----o B +# o-------o B # \ -# \---o C +# \-----o C # \ -# \-o D +# \---o D # \ -# o E +# \-o E +# \ +# o F # Commit A: some file a # Commit B: adds file b, modifies end of a # Commit C: adds file c # Commit D: adds file d, modifies beginning of a # Commit E: renames a->subdir/a, adds subdir/e +# Commit F: empty commit test_expect_success 'setup trivial merges' ' test_seq 1 10 >a && @@ -29,6 +32,7 @@ test_expect_success 'setup trivial merges' ' git branch C && git branch D && git branch E && + git branch F && git checkout B && echo b >b && @@ -52,7 +56,10 @@ test_expect_success 'setup trivial merges' ' git mv a subdir/a && echo e >subdir/e && git add subdir && - test_tick && git commit -m E + test_tick && git commit -m E && + + git checkout F && + test_tick && git commit --allow-empty -m F ' test_expect_success 'ff update' ' @@ -105,6 +112,15 @@ test_expect_success 'recursive' ' test_must_fail git merge -s recursive C^0 ' +test_expect_success 'recursive, when merge branch matches merge base' ' + git reset --hard && + git checkout B^0 && + + touch random_file && git add random_file && + + test_must_fail git merge -s recursive F^0 +' + test_expect_success 'octopus, unrelated file touched' ' git reset --hard && git checkout B^0 && diff --git a/t/t6046-merge-skip-unneeded-updates.sh b/t/t6046-merge-skip-unneeded-updates.sh new file mode 100755 index 0000000000..fcefffcaec --- /dev/null +++ b/t/t6046-merge-skip-unneeded-updates.sh @@ -0,0 +1,761 @@ +#!/bin/sh + +test_description="merge cases" + +# The setup for all of them, pictorially, is: +# +# A +# o +# / \ +# O o ? +# \ / +# o +# B +# +# To help make it easier to follow the flow of tests, they have been +# divided into sections and each test will start with a quick explanation +# of what commits O, A, and B contain. +# +# Notation: +# z/{b,c} means files z/b and z/c both exist +# x/d_1 means file x/d exists with content d1. (Purpose of the +# underscore notation is to differentiate different +# files that might be renamed into each other's paths.) + +. ./test-lib.sh + + +########################################################################### +# SECTION 1: Cases involving no renames (one side has subset of changes of +# the other side) +########################################################################### + +# Testcase 1a, Changes on A, subset of changes on B +# Commit O: b_1 +# Commit A: b_2 +# Commit B: b_3 +# Expected: b_2 + +test_expect_success '1a-setup: Modify(A)/Modify(B), change on B subset of A' ' + test_create_repo 1a && + ( + cd 1a && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1a-check-L: Modify(A)/Modify(B), change on B subset of A' ' + test_when_finished "git -C 1a reset --hard" && + test_when_finished "git -C 1a clean -fd" && + ( + cd 1a && + + git checkout A^0 && + + test-tool chmtime =31337 b && + test-tool chmtime -v +0 b >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped b" out && + test_must_be_empty err && + + test-tool chmtime -v +0 b >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:b && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object b >actual && + git rev-parse A:b >expect && + test_cmp expect actual + ) +' + +test_expect_success '1a-check-R: Modify(A)/Modify(B), change on B subset of A' ' + test_when_finished "git -C 1a reset --hard" && + test_when_finished "git -C 1a clean -fd" && + ( + cd 1a && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep "Auto-merging b" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:b && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object b >actual && + git rev-parse A:b >expect && + test_cmp expect actual + ) +' + + +########################################################################### +# SECTION 2: Cases involving basic renames +########################################################################### + +# Testcase 2a, Changes on A, rename on B +# Commit O: b_1 +# Commit A: b_2 +# Commit B: c_1 +# Expected: c_2 + +test_expect_success '2a-setup: Modify(A)/rename(B)' ' + test_create_repo 2a && + ( + cd 2a && + + test_seq 1 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_seq 1 11 >b && + git add b && + test_tick && + git commit -m "A" && + + git checkout B && + git mv b c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2a-check-L: Modify/rename, merge into modify side' ' + test_when_finished "git -C 2a reset --hard" && + test_when_finished "git -C 2a clean -fd" && + ( + cd 2a && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep ! "Skipped c" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:b >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +test_expect_success '2a-check-R: Modify/rename, merge into rename side' ' + test_when_finished "git -C 2a reset --hard" && + test_when_finished "git -C 2a clean -fd" && + ( + cd 2a && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep ! "Skipped c" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:b >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +# Testcase 2b, Changed and renamed on A, subset of changes on B +# Commit O: b_1 +# Commit A: c_2 +# Commit B: b_3 +# Expected: c_2 + +test_expect_success '2b-setup: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_create_repo 2b && + ( + cd 2b && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + git mv b c && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2b-check-L: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_when_finished "git -C 2b reset --hard" && + test_when_finished "git -C 2b clean -fd" && + ( + cd 2b && + + git checkout A^0 && + + test-tool chmtime =31337 c && + test-tool chmtime -v +0 c >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped c" out && + test_must_be_empty err && + + test-tool chmtime -v +0 c >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:c && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:c >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +test_expect_success '2b-check-R: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_when_finished "git -C 2b reset --hard" && + test_when_finished "git -C 2b clean -fd" && + ( + cd 2b && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep "Auto-merging c" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:c && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:c >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +# Testcase 2c, Changes on A, rename on B +# Commit O: b_1 +# Commit A: b_2, c_3 +# Commit B: c_1 +# Expected: rename/add conflict c_2 vs c_3 +# +# NOTE: Since A modified b_1->b_2, and B renamed b_1->c_1, the threeway +# merge of those files should result in c_2. We then should have a +# rename/add conflict between c_2 and c_3. However, if we note in +# merge_content() that A had the right contents (b_2 has same +# contents as c_2, just at a different name), and that A had the +# right path present (c_3 existed) and thus decides that it can +# skip the update, then we're in trouble. This test verifies we do +# not make that particular mistake. + +test_expect_success '2c-setup: Modify b & add c VS rename b->c' ' + test_create_repo 2c && + ( + cd 2c && + + test_seq 1 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_seq 1 11 >b && + echo whatever >c && + git add b c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv b c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2c-check: Modify b & add c VS rename b->c' ' + ( + cd 2c && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "CONFLICT (rename/add): Rename b->c" out && + test_i18ngrep ! "Skipped c" out && + test_must_be_empty err + + # FIXME: rename/add conflicts are horribly broken right now; + # when I get back to my patch series fixing it and + # rename/rename(2to1) conflicts to bring them in line with + # how add/add conflicts behave, then checks like the below + # could be added. But that patch series is waiting until + # the rename-directory-detection series lands, which this + # is part of. And in the mean time, I do not want to further + # enforce broken behavior. So for now, the main test is the + # one above that err is an empty file. + + #git ls-files -s >index_files && + #test_line_count = 2 index_files && + + #git rev-parse >actual :2:c :3:c && + #git rev-parse >expect A:b A:c && + #test_cmp expect actual && + + #git cat-file -p A:b >>merged && + #git cat-file -p A:c >>merge-me && + #>empty && + #test_must_fail git merge-file \ + # -L "Temporary merge branch 1" \ + # -L "" \ + # -L "Temporary merge branch 2" \ + # merged empty merge-me && + #sed -e "s/^\([<=>]\)/\1\1\1/" merged >merged-internal && + + #git hash-object c >actual && + #git hash-object merged-internal >expect && + #test_cmp expect actual && + + #test_path_is_missing b + ) +' + + +########################################################################### +# SECTION 3: Cases involving directory renames +# +# NOTE: +# Directory renames only apply when one side renames a directory, and the +# other side adds or renames a path into that directory. Applying the +# directory rename to that new path creates a new pathname that didn't +# exist on either side of history. Thus, it is impossible for the +# merge contents to already be at the right path, so all of these checks +# exist just to make sure that updates are not skipped. +########################################################################### + +# Testcase 3a, Change + rename into dir foo on A, dir rename foo->bar on B +# Commit O: bq_1, foo/whatever +# Commit A: foo/{bq_2, whatever} +# Commit B: bq_1, bar/whatever +# Expected: bar/{bq_2, whatever} + +test_expect_success '3a-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_create_repo 3a && + ( + cd 3a && + + mkdir foo && + test_seq 1 10 >bq && + test_write_lines a b c d e f g h i j k >foo/whatever && + git add bq foo/whatever && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_seq 1 11 >bq && + git add bq && + git mv bq foo/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv foo/ bar/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3a-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3a reset --hard" && + test_when_finished "git -C 3a clean -fd" && + ( + cd 3a && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect A:foo/bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse A:foo/bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +test_expect_success '3a-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3a reset --hard" && + test_when_finished "git -C 3a clean -fd" && + ( + cd 3a && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect A:foo/bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse A:foo/bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +# Testcase 3b, rename into dir foo on A, dir rename foo->bar + change on B +# Commit O: bq_1, foo/whatever +# Commit A: foo/{bq_1, whatever} +# Commit B: bq_2, bar/whatever +# Expected: bar/{bq_2, whatever} + +test_expect_success '3b-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_create_repo 3b && + ( + cd 3b && + + mkdir foo && + test_seq 1 10 >bq && + test_write_lines a b c d e f g h i j k >foo/whatever && + git add bq foo/whatever && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv bq foo/ && + test_tick && + git commit -m "A" && + + git checkout B && + test_seq 1 11 >bq && + git add bq && + git mv foo/ bar/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3b-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3b reset --hard" && + test_when_finished "git -C 3b clean -fd" && + ( + cd 3b && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect B:bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse B:bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +test_expect_success '3b-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3b reset --hard" && + test_when_finished "git -C 3b clean -fd" && + ( + cd 3b && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect B:bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse B:bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +########################################################################### +# SECTION 4: Cases involving dirty changes +########################################################################### + +# Testcase 4a, Changed on A, subset of changes on B, locally modified +# Commit O: b_1 +# Commit A: b_2 +# Commit B: b_3 +# Working copy: b_4 +# Expected: b_2 for merge, b_4 in working copy + +test_expect_success '4a-setup: Change on A, change on B subset of A, dirty mods present' ' + test_create_repo 4a && + ( + cd 4a && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +# NOTE: For as long as we continue using unpack_trees() without index_only +# set to true, it will error out on a case like this claiming the the locally +# modified file would be overwritten by the merge. Getting this testcase +# correct requires doing the merge in-memory first, then realizing that no +# updates to the file are necessary, and thus that we can just leave the path +# alone. +test_expect_failure '4a-check: Change on A, change on B subset of A, dirty mods present' ' + test_when_finished "git -C 4a reset --hard" && + test_when_finished "git -C 4a clean -fd" && + ( + cd 4a && + + git checkout A^0 && + echo "File rewritten" >b && + + test-tool chmtime =31337 b && + test-tool chmtime -v +0 b >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped b" out && + test_must_be_empty err && + + test-tool chmtime -v +0 b >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual :0:b && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object b >actual && + echo "File rewritten" | git hash-object --stdin >expect && + test_cmp expect actual + ) +' + +# Testcase 4b, Changed+renamed on A, subset of changes on B, locally modified +# Commit O: b_1 +# Commit A: c_2 +# Commit B: b_3 +# Working copy: c_4 +# Expected: c_2 + +test_expect_success '4b-setup: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' + test_create_repo 4b && + ( + cd 4b && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + git mv b c && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '4b-check: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' + test_when_finished "git -C 4b reset --hard" && + test_when_finished "git -C 4b clean -fd" && + ( + cd 4b && + + git checkout A^0 && + echo "File rewritten" >c && + + test-tool chmtime =31337 c && + test-tool chmtime -v +0 c >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped c" out && + test_must_be_empty err && + + test-tool chmtime -v +0 c >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual :0:c && + git rev-parse >expect A:c && + test_cmp expect actual && + + git hash-object c >actual && + echo "File rewritten" | git hash-object --stdin >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +test_done diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index c630aba657..d174bfed30 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -444,4 +444,32 @@ test_expect_success GPG '--graft on a commit with a mergetag' ' git replace -d $HASH10 ' +test_expect_success '--convert-graft-file' ' + git checkout -b with-graft-file && + test_commit root2 && + git reset --hard root2^ && + test_commit root1 && + test_commit after-root1 && + test_tick && + git merge -m merge-root2 root2 && + + : add and convert graft file && + printf "%s\n%s %s\n\n# comment\n%s\n" \ + $(git rev-parse HEAD^^ HEAD^ HEAD^^ HEAD^2) \ + >.git/info/grafts && + git replace --convert-graft-file && + test_path_is_missing .git/info/grafts && + + : verify that the history is now "grafted" && + git rev-list HEAD >out && + test_line_count = 4 out && + + : create invalid graft file and verify that it is not deleted && + test_when_finished "rm -f .git/info/grafts" && + echo $EMPTY_BLOB $EMPTY_TREE >.git/info/grafts && + test_must_fail git replace --convert-graft-file 2>err && + test_i18ngrep "$EMPTY_BLOB $EMPTY_TREE" err && + test_i18ngrep "$EMPTY_BLOB $EMPTY_TREE" .git/info/grafts +' + test_done diff --git a/t/t6100-rev-list-in-order.sh b/t/t6100-rev-list-in-order.sh new file mode 100755 index 0000000000..b2bb0a7f61 --- /dev/null +++ b/t/t6100-rev-list-in-order.sh @@ -0,0 +1,77 @@ +#!/bin/sh + +test_description='rev-list testing in-commit-order' + +. ./test-lib.sh + +test_expect_success 'setup a commit history with trees, blobs' ' + for x in one two three four + do + echo $x >$x && + git add $x && + git commit -m "add file $x" || + return 1 + done && + for x in four three + do + git rm $x && + git commit -m "remove $x" || + return 1 + done +' + +test_expect_success 'rev-list --in-commit-order' ' + git rev-list --in-commit-order --objects HEAD >actual.raw && + cut -c 1-40 >actual <actual.raw && + + git cat-file --batch-check="%(objectname)" >expect.raw <<-\EOF && + HEAD^{commit} + HEAD^{tree} + HEAD^{tree}:one + HEAD^{tree}:two + HEAD~1^{commit} + HEAD~1^{tree} + HEAD~1^{tree}:three + HEAD~2^{commit} + HEAD~2^{tree} + HEAD~2^{tree}:four + HEAD~3^{commit} + # HEAD~3^{tree} skipped, same as HEAD~1^{tree} + HEAD~4^{commit} + # HEAD~4^{tree} skipped, same as HEAD^{tree} + HEAD~5^{commit} + HEAD~5^{tree} + EOF + grep -v "#" >expect <expect.raw && + + test_cmp expect actual +' + +test_expect_success 'rev-list lists blobs and trees after commits' ' + git rev-list --objects HEAD >actual.raw && + cut -c 1-40 >actual <actual.raw && + + git cat-file --batch-check="%(objectname)" >expect.raw <<-\EOF && + HEAD^{commit} + HEAD~1^{commit} + HEAD~2^{commit} + HEAD~3^{commit} + HEAD~4^{commit} + HEAD~5^{commit} + HEAD^{tree} + HEAD^{tree}:one + HEAD^{tree}:two + HEAD~1^{tree} + HEAD~1^{tree}:three + HEAD~2^{tree} + HEAD~2^{tree}:four + # HEAD~3^{tree} skipped, same as HEAD~1^{tree} + # HEAD~4^{tree} skipped, same as HEAD^{tree} + HEAD~5^{tree} + EOF + grep -v "#" >expect <expect.raw && + + test_cmp expect actual +' + +test_done diff --git a/t/t6112-rev-list-filters-objects.sh b/t/t6112-rev-list-filters-objects.sh new file mode 100755 index 0000000000..0a37dd5f97 --- /dev/null +++ b/t/t6112-rev-list-filters-objects.sh @@ -0,0 +1,225 @@ +#!/bin/sh + +test_description='git rev-list using object filtering' + +. ./test-lib.sh + +# Test the blob:none filter. + +test_expect_success 'setup r1' ' + echo "{print \$1}" >print_1.awk && + echo "{print \$2}" >print_2.awk && + + git init r1 && + for n in 1 2 3 4 5 + do + echo "This is file: $n" > r1/file.$n + git -C r1 add file.$n + git -C r1 commit -m "$n" + done +' + +test_expect_success 'verify blob:none omits all 5 blobs' ' + git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r1 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:none \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify emitted+omitted == all' ' + git -C r1 rev-list HEAD --objects \ + | awk -f print_1.awk \ + | sort >expected && + git -C r1 rev-list HEAD --objects --filter-print-omitted --filter=blob:none \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + + +# Test blob:limit=<n>[kmg] filter. +# We boundary test around the size parameter. The filter is strictly less than +# the value, so size 500 and 1000 should have the same results, but 1001 should +# filter more. + +test_expect_success 'setup r2' ' + git init r2 && + for n in 1000 10000 + do + printf "%"$n"s" X > r2/large.$n + git -C r2 add large.$n + git -C r2 commit -m "$n" + done +' + +test_expect_success 'verify blob:limit=500 omits all blobs' ' + git -C r2 ls-files -s large.1000 large.10000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=500 \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify emitted+omitted == all' ' + git -C r2 rev-list HEAD --objects \ + | awk -f print_1.awk \ + | sort >expected && + git -C r2 rev-list HEAD --objects --filter-print-omitted --filter=blob:limit=500 \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify blob:limit=1000' ' + git -C r2 ls-files -s large.1000 large.10000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1000 \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify blob:limit=1001' ' + git -C r2 ls-files -s large.10000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1001 \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify blob:limit=1k' ' + git -C r2 ls-files -s large.10000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1k \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify blob:limit=1m' ' + cat </dev/null >expected && + git -C r2 rev-list HEAD --quiet --objects --filter-print-omitted --filter=blob:limit=1m \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +# Test sparse:path=<path> filter. +# Use a local file containing a sparse-checkout specification to filter +# out blobs not required for the corresponding sparse-checkout. We do not +# require sparse-checkout to actually be enabled. + +test_expect_success 'setup r3' ' + git init r3 && + mkdir r3/dir1 && + for n in sparse1 sparse2 + do + echo "This is file: $n" > r3/$n + git -C r3 add $n + echo "This is file: dir1/$n" > r3/dir1/$n + git -C r3 add dir1/$n + done && + git -C r3 commit -m "sparse" && + echo dir1/ >pattern1 && + echo sparse1 >pattern2 +' + +test_expect_success 'verify sparse:path=pattern1 omits top-level files' ' + git -C r3 ls-files -s sparse1 sparse2 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:path=../pattern1 \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify sparse:path=pattern2 omits both sparse2 files' ' + git -C r3 ls-files -s sparse2 dir1/sparse2 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:path=../pattern2 \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +# Test sparse:oid=<oid-ish> filter. +# Like sparse:path, but we get the sparse-checkout specification from +# a blob rather than a file on disk. + +test_expect_success 'setup r3 part 2' ' + echo dir1/ >r3/pattern && + git -C r3 add pattern && + git -C r3 commit -m "pattern" +' + +test_expect_success 'verify sparse:oid=OID omits top-level files' ' + git -C r3 ls-files -s pattern sparse1 sparse2 \ + | awk -f print_2.awk \ + | sort >expected && + oid=$(git -C r3 ls-files -s pattern | awk -f print_2.awk) && + git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:oid=$oid \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'verify sparse:oid=oid-ish omits top-level files' ' + git -C r3 ls-files -s pattern sparse1 sparse2 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r3 rev-list HEAD --quiet --objects --filter-print-omitted --filter=sparse:oid=master:pattern \ + | awk -f print_1.awk \ + | sed "s/~//" \ + | sort >observed && + test_cmp observed expected +' + +# Delete some loose objects and use rev-list, but WITHOUT any filtering. +# This models previously omitted objects that we did not receive. + +test_expect_success 'rev-list W/ --missing=print' ' + git -C r1 ls-files -s file.1 file.2 file.3 file.4 file.5 \ + | awk -f print_2.awk \ + | sort >expected && + for id in `cat expected | sed "s|..|&/|"` + do + rm r1/.git/objects/$id + done && + git -C r1 rev-list --quiet HEAD --missing=print --objects \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed && + test_cmp observed expected +' + +test_expect_success 'rev-list W/O --missing fails' ' + test_must_fail git -C r1 rev-list --quiet --objects HEAD +' + +test_expect_success 'rev-list W/ missing=allow-any' ' + git -C r1 rev-list --quiet --missing=allow-any --objects HEAD +' + +test_done diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index 25110ea55d..bae78c4e89 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -122,7 +122,7 @@ test_expect_success 'describe --contains defaults to HEAD without commit-ish' ' ' : >err.expect -check_describe A --all A^0 +check_describe tags/A --all A^0 test_expect_success 'no warning was displayed for A' ' test_cmp err.expect err.actual ' @@ -190,6 +190,33 @@ check_describe "test1-lightweight-*" --long --tags --match="test1-*" --match="te check_describe "test1-lightweight-*" --long --tags --match="test3-*" --match="test1-*" HEAD +test_expect_success 'set-up branches' ' + git branch branch_A A && + git branch branch_C c && + git update-ref refs/remotes/origin/remote_branch_A "A^{commit}" && + git update-ref refs/remotes/origin/remote_branch_C "c^{commit}" && + git update-ref refs/original/original_branch_A test-annotated~2 +' + +check_describe "heads/branch_A*" --all --match="branch_*" --exclude="branch_C" HEAD + +check_describe "remotes/origin/remote_branch_A*" --all --match="origin/remote_branch_*" --exclude="origin/remote_branch_C" HEAD + +check_describe "original/original_branch_A*" --all test-annotated~1 + +test_expect_success '--match does not work for other types' ' + test_must_fail git describe --all --match="*original_branch_*" test-annotated~1 +' + +test_expect_success '--exclude does not work for other types' ' + R=$(git describe --all --exclude="any_pattern_even_not_matching" test-annotated~1) && + case "$R" in + *original_branch_A*) echo "fail: Found unknown reference $R with --exclude" + false;; + *) echo ok: Found some known type;; + esac +' + test_expect_success 'name-rev with exact tags' ' echo A >expect && tag_object=$(git rev-parse refs/tags/A) && @@ -202,6 +229,31 @@ test_expect_success 'name-rev with exact tags' ' test_cmp expect actual ' +test_expect_success 'name-rev --all' ' + >expect.unsorted && + for rev in $(git rev-list --all) + do + git name-rev $rev >>expect.unsorted + done && + sort <expect.unsorted >expect && + git name-rev --all >actual.unsorted && + sort <actual.unsorted >actual && + test_cmp expect actual +' + +test_expect_success 'name-rev --stdin' ' + >expect.unsorted && + for rev in $(git rev-list --all) + do + name=$(git name-rev --name-only $rev) && + echo "$rev ($name)" >>expect.unsorted + done && + sort <expect.unsorted >expect && + git rev-list --all | git name-rev --stdin >actual.unsorted && + sort <actual.unsorted >actual && + test_cmp expect actual +' + test_expect_success 'describe --contains with the exact tags' ' echo "A^0" >expect && tag_object=$(git rev-parse refs/tags/A) && @@ -252,9 +304,86 @@ test_expect_success 'describe chokes on severely broken submodules' ' mv .git/modules/sub1/ .git/modules/sub_moved && test_must_fail git describe --dirty ' -test_expect_success 'describe ignoring a borken submodule' ' +test_expect_success 'describe ignoring a broken submodule' ' git describe --broken >out && + test_when_finished "mv .git/modules/sub_moved .git/modules/sub1" && grep broken out ' +test_expect_success 'describe a blob at a directly tagged commit' ' + echo "make it a unique blob" >file && + git add file && git commit -m "content in file" && + git tag -a -m "latest annotated tag" unique-file && + git describe HEAD:file >actual && + echo "unique-file:file" >expect && + test_cmp expect actual +' + +test_expect_success 'describe a blob with its first introduction' ' + git commit --allow-empty -m "empty commit" && + git rm file && + git commit -m "delete blob" && + git revert HEAD && + git commit --allow-empty -m "empty commit" && + git describe HEAD:file >actual && + echo "unique-file:file" >expect && + test_cmp expect actual +' + +test_expect_success 'describe directly tagged blob' ' + git tag test-blob unique-file:file && + git describe test-blob >actual && + echo "unique-file:file" >expect && + # suboptimal: we rather want to see "test-blob" + test_cmp expect actual +' + +test_expect_success 'describe tag object' ' + git tag test-blob-1 -a -m msg unique-file:file && + test_must_fail git describe test-blob-1 2>actual && + test_i18ngrep "fatal: test-blob-1 is neither a commit nor blob" actual +' + +test_expect_failure ULIMIT_STACK_SIZE 'name-rev works in a deep repo' ' + i=1 && + while test $i -lt 8000 + do + echo "commit refs/heads/master +committer A U Thor <author@example.com> $((1000000000 + $i * 100)) +0200 +data <<EOF +commit #$i +EOF" + test $i = 1 && echo "from refs/heads/master^0" + i=$(($i + 1)) + done | git fast-import && + git checkout master && + git tag far-far-away HEAD^ && + echo "HEAD~4000 tags/far-far-away~3999" >expect && + git name-rev HEAD~4000 >actual && + test_cmp expect actual && + run_with_limited_stack git name-rev HEAD~4000 >actual && + test_cmp expect actual +' + +test_expect_success ULIMIT_STACK_SIZE 'describe works in a deep repo' ' + git tag -f far-far-away HEAD~7999 && + echo "far-far-away" >expect && + git describe --tags --abbrev=0 HEAD~4000 >actual && + test_cmp expect actual && + run_with_limited_stack git describe --tags --abbrev=0 HEAD~4000 >actual && + test_cmp expect actual +' + +check_describe tags/A --all A +check_describe tags/c --all c +check_describe heads/branch_A --all --match='branch_*' branch_A + +test_expect_success 'describe complains about tree object' ' + test_must_fail git describe HEAD^{tree} +' + +test_expect_success 'describe complains about missing object' ' + test_must_fail git describe $_z40 +' + test_done diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 2e2fb0e957..a54a52aaa4 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -512,7 +512,7 @@ test_expect_success 'merge-msg with "merging" an annotated tag' ' test_when_finished "git reset --hard" && annote=$(git rev-parse annote) && - git merge --no-commit $annote && + git merge --no-commit --no-ff $annote && { cat <<-EOF Merge tag '\''$annote'\'' diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index d0ad902911..295d1475bd 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -373,11 +373,8 @@ test_expect_success 'Quoting style: tcl' ' for i in "--perl --shell" "-s --python" "--python --tcl" "--tcl --perl"; do test_expect_success "more than one quoting style: $i" " - git for-each-ref $i 2>&1 | (read line && - case \$line in - \"error: more than one quoting style\"*) : happy;; - *) false - esac) + test_must_fail git for-each-ref $i 2>err && + grep '^error: more than one quoting style' err " done @@ -610,18 +607,104 @@ test_expect_success 'do not dereference NULL upon %(HEAD) on unborn branch' ' cat >trailers <<EOF Reviewed-by: A U Thor <author@example.com> Signed-off-by: A U Thor <author@example.com> +[ v2 updated patch description ] +Acked-by: A U Thor + <author@example.com> EOF -test_expect_success 'basic atom: head contents:trailers' ' +unfold () { + perl -0pe 's/\n\s+/ /g' +} + +test_expect_success 'set up trailers for next test' ' echo "Some contents" > two && git add two && - git commit -F - <<-EOF && + git commit -F - <<-EOF trailers: this commit message has trailers Some message contents $(cat trailers) EOF +' + +test_expect_success '%(trailers:unfold) unfolds trailers' ' + git for-each-ref --format="%(trailers:unfold)" refs/heads/master >actual && + { + unfold <trailers + echo + } >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:only) shows only "key: value" trailers' ' + git for-each-ref --format="%(trailers:only)" refs/heads/master >actual && + { + grep -v patch.description <trailers && + echo + } >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:only) and %(trailers:unfold) work together' ' + git for-each-ref --format="%(trailers:only,unfold)" refs/heads/master >actual && + git for-each-ref --format="%(trailers:unfold,only)" refs/heads/master >reverse && + test_cmp actual reverse && + { + grep -v patch.description <trailers | unfold && + echo + } >expect && + test_cmp expect actual +' + +test_expect_success '%(contents:trailers:unfold) unfolds trailers' ' + git for-each-ref --format="%(contents:trailers:unfold)" refs/heads/master >actual && + { + unfold <trailers + echo + } >expect && + test_cmp expect actual +' + +test_expect_success '%(contents:trailers:only) shows only "key: value" trailers' ' + git for-each-ref --format="%(contents:trailers:only)" refs/heads/master >actual && + { + grep -v patch.description <trailers && + echo + } >expect && + test_cmp expect actual +' + +test_expect_success '%(contents:trailers:only) and %(contents:trailers:unfold) work together' ' + git for-each-ref --format="%(contents:trailers:only,unfold)" refs/heads/master >actual && + git for-each-ref --format="%(contents:trailers:unfold,only)" refs/heads/master >reverse && + test_cmp actual reverse && + { + grep -v patch.description <trailers | unfold && + echo + } >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers) rejects unknown trailers arguments' ' + # error message cannot be checked under i18n + cat >expect <<-EOF && + fatal: unknown %(trailers) argument: unsupported + EOF + test_must_fail git for-each-ref --format="%(trailers:unsupported)" 2>actual && + test_i18ncmp expect actual +' + +test_expect_success '%(contents:trailers) rejects unknown trailers arguments' ' + # error message cannot be checked under i18n + cat >expect <<-EOF && + fatal: unknown %(trailers) argument: unsupported + EOF + test_must_fail git for-each-ref --format="%(contents:trailers:unsupported)" 2>actual && + test_i18ncmp expect actual +' + +test_expect_success 'basic atom: head contents:trailers' ' git for-each-ref --format="%(contents:trailers)" refs/heads/master >actual && sanitize_pgp <actual >actual.clean && # git for-each-ref ends with a blank line @@ -680,4 +763,36 @@ test_expect_success 'Verify usage of %(symref:rstrip) atom' ' test_cmp expected actual ' +test_expect_success ':remotename and :remoteref' ' + git init remote-tests && + ( + cd remote-tests && + test_commit initial && + git remote add from fifth.coffee:blub && + git config branch.master.remote from && + git config branch.master.merge refs/heads/stable && + git remote add to southridge.audio:repo && + git config remote.to.push "refs/heads/*:refs/heads/pushed/*" && + git config branch.master.pushRemote to && + for pair in "%(upstream)=refs/remotes/from/stable" \ + "%(upstream:remotename)=from" \ + "%(upstream:remoteref)=refs/heads/stable" \ + "%(push)=refs/remotes/to/pushed/master" \ + "%(push:remotename)=to" \ + "%(push:remoteref)=refs/heads/pushed/master" + do + echo "${pair#*=}" >expect && + git for-each-ref --format="${pair%=*}" \ + refs/heads/master >actual && + test_cmp expect actual + done && + git branch push-simple && + git config branch.push-simple.pushRemote from && + actual="$(git for-each-ref \ + --format="%(push:remotename),%(push:remoteref)" \ + refs/heads/push-simple)" && + test from, = "$actual" + ) +' + test_done diff --git a/t/t6500-gc.sh b/t/t6500-gc.sh index 41b0be575d..818435f04e 100755 --- a/t/t6500-gc.sh +++ b/t/t6500-gc.sh @@ -5,6 +5,13 @@ test_description='basic git gc tests . ./test-lib.sh +test_expect_success 'setup' ' + # do not let the amount of physical memory affects gc + # behavior, make sure we always pack everything to one pack by + # default + git config gc.bigPackThreshold 2g +' + test_expect_success 'gc empty repository' ' git gc ' @@ -43,6 +50,31 @@ test_expect_success 'gc is not aborted due to a stale symref' ' ) ' +test_expect_success 'gc --keep-largest-pack' ' + test_create_repo keep-pack && + ( + cd keep-pack && + test_commit one && + test_commit two && + test_commit three && + git gc && + ( cd .git/objects/pack && ls *.pack ) >pack-list && + test_line_count = 1 pack-list && + BASE_PACK=.git/objects/pack/pack-*.pack && + test_commit four && + git repack -d && + test_commit five && + git repack -d && + ( cd .git/objects/pack && ls *.pack ) >pack-list && + test_line_count = 3 pack-list && + git gc --keep-largest-pack && + ( cd .git/objects/pack && ls *.pack ) >pack-list && + test_line_count = 2 pack-list && + test_path_is_file $BASE_PACK && + git fsck + ) +' + test_expect_success 'auto gc with too many loose objects does not attempt to create bitmaps' ' test_config gc.auto 3 && test_config gc.autodetach false && @@ -87,7 +119,7 @@ test_expect_success 'background auto gc does not run if gc.log is present and re test_must_fail git gc --auto 2>err && test_i18ngrep "^error:" err && test_config gc.logexpiry 5.days && - test-chmtime =-345600 .git/gc.log && + test-tool chmtime =-345600 .git/gc.log && test_must_fail git gc --auto && test_config gc.logexpiry 2.days && run_and_wait_for_auto_gc && diff --git a/t/t6501-freshen-objects.sh b/t/t6501-freshen-objects.sh index 394b169ead..033871ee5f 100755 --- a/t/t6501-freshen-objects.sh +++ b/t/t6501-freshen-objects.sh @@ -72,8 +72,7 @@ for repack in '' true; do ' test_expect_success "simulate time passing ($title)" ' - find .git/objects -type f | - xargs test-chmtime -v -86400 + test-tool chmtime --get -86400 $(find .git/objects -type f) ' test_expect_success "start writing new commit with old blob ($title)" ' @@ -103,8 +102,7 @@ for repack in '' true; do test_expect_success "abandon objects again ($title)" ' git reset --hard HEAD^ && - find .git/objects -type f | - xargs test-chmtime -v -86400 + test-tool chmtime --get -86400 $(find .git/objects -type f) ' test_expect_success "start writing new commit with same tree ($title)" ' diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index e365d1ff77..cc3fd2baf2 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -21,8 +21,8 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path0/COPYING..*path1/COPYING"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path0/COPYING..*path1/COPYING" actual' test_expect_success \ 'moving the file back into subdirectory' \ @@ -35,8 +35,14 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path1/COPYING..*path0/COPYING"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path1/COPYING..*path0/COPYING" actual' + +test_expect_success \ + 'mv --dry-run does not move file' \ + 'git mv -n path0/COPYING MOVED && + test -f path0/COPYING && + test ! -f MOVED' test_expect_success \ 'checking -k on non-existing file' \ @@ -116,10 +122,9 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path0/COPYING..*path2/COPYING" && - git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path0/README..*path2/README"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path0/COPYING..*path2/COPYING" actual && + grep "^R100..*path0/README..*path2/README" actual' test_expect_success \ 'succeed when source is a prefix of destination' \ @@ -135,10 +140,9 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path2/COPYING..*path1/path2/COPYING" && - git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path2/README..*path1/path2/README"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path2/COPYING..*path1/path2/COPYING" actual && + grep "^R100..*path2/README..*path1/path2/README" actual' test_expect_success \ 'do not move directory over existing directory' \ @@ -452,7 +456,7 @@ test_expect_success 'checking out a commit before submodule moved needs manual u git mv sub sub2 && git commit -m "moved sub to sub2" && git checkout -q HEAD^ 2>actual && - test_i18ngrep "^warning: unable to rmdir sub2:" actual && + test_i18ngrep "^warning: unable to rmdir '\''sub2'\'':" actual && git status -s sub2 >actual && echo "?? sub2/" >expected && test_cmp expected actual && @@ -488,7 +492,32 @@ test_expect_success 'moving a submodule in nested directories' ' git config -f ../.gitmodules submodule.deep/directory/hierarchy/sub.path >../actual && echo "directory/hierarchy/sub" >../expect ) && - test_cmp actual expect + test_cmp expect actual +' + +test_expect_success 'moving nested submodules' ' + git commit -am "cleanup commit" && + mkdir sub_nested_nested && + (cd sub_nested_nested && + touch nested_level2 && + git init && + git add . && + git commit -m "nested level 2" + ) && + mkdir sub_nested && + (cd sub_nested && + touch nested_level1 && + git init && + git add . && + git commit -m "nested level 1" + git submodule add ../sub_nested_nested && + git commit -m "add nested level 2" + ) && + git submodule add ./sub_nested nested_move && + git commit -m "add nested_move" && + git submodule update --init --recursive && + git mv nested_move sub_nested_moved && + git status ' test_done diff --git a/t/t7003-filter-branch.sh b/t/t7003-filter-branch.sh index 7cb60799be..ec4b160ddb 100755 --- a/t/t7003-filter-branch.sh +++ b/t/t7003-filter-branch.sh @@ -187,7 +187,8 @@ test_expect_success 'author information is preserved' ' test \$GIT_COMMIT != $(git rev-parse master) || \ echo Hallo" \ preserved-author) && - test 1 = $(git rev-list --author="B V Uips" preserved-author | wc -l) + git rev-list --author="B V Uips" preserved-author >actual && + test_line_count = 1 actual ' test_expect_success "remove a certain author's commits" ' @@ -205,7 +206,8 @@ test_expect_success "remove a certain author's commits" ' cnt1=$(git rev-list master | wc -l) && cnt2=$(git rev-list removed-author | wc -l) && test $cnt1 -eq $(($cnt2 + 1)) && - test 0 = $(git rev-list --author="B V Uips" removed-author | wc -l) + git rev-list --author="B V Uips" removed-author >actual && + test_line_count = 0 actual ' test_expect_success 'barf on invalid name' ' @@ -258,7 +260,8 @@ test_expect_success 'Subdirectory filter with disappearing trees' ' git commit -m "Re-adding foo" && git filter-branch -f --subdirectory-filter foo && - test $(git rev-list master | wc -l) = 3 + git rev-list master >actual && + test_line_count = 3 actual ' test_expect_success 'Tag name filtering retains tag message' ' @@ -470,4 +473,18 @@ test_expect_success 'tree-filter deals with object name vs pathname ambiguity' ' git show HEAD:$ambiguous ' +test_expect_success 'rewrite repository including refs that point at non-commit object' ' + test_when_finished "git reset --hard original" && + tree=$(git rev-parse HEAD^{tree}) && + test_when_finished "git replace -d $tree" && + echo A >new && + git add new && + new_tree=$(git write-tree) && + git replace $tree $new_tree && + git tag -a -m "tag to a tree" treetag $new_tree && + git reset --hard HEAD && + git filter-branch -f -- --all >filter-output 2>&1 && + ! fgrep fatal filter-output +' + test_done diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 62aa322846..d7b319e919 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -363,7 +363,7 @@ test_expect_success 'tag -l <pattern> -l <pattern> works, as our buggy documenta ' test_expect_success 'listing tags in column' ' - COLUMNS=40 git tag -l --column=row >actual && + COLUMNS=41 git tag -l --column=row >actual && cat >expected <<\EOF && a1 aa1 cba t210 t211 v0.2.1 v1.0 v1.0.1 v1.1.3 @@ -452,6 +452,21 @@ test_expect_success \ test_cmp expect actual ' +get_tag_header annotated-tag-edit $commit commit $time >expect +echo "An edited message" >>expect +test_expect_success 'set up editor' ' + write_script fakeeditor <<-\EOF + sed -e "s/A message/An edited message/g" <"$1" >"$1-" + mv "$1-" "$1" + EOF +' +test_expect_success \ + 'creating an annotated tag with -m message --edit should succeed' ' + GIT_EDITOR=./fakeeditor git tag -m "A message" --edit annotated-tag-edit && + get_tag_msg annotated-tag-edit >actual && + test_cmp expect actual +' + cat >msgfile <<EOF Another message in a file. @@ -465,6 +480,21 @@ test_expect_success \ test_cmp expect actual ' +get_tag_header file-annotated-tag-edit $commit commit $time >expect +sed -e "s/Another message/Another edited message/g" msgfile >>expect +test_expect_success 'set up editor' ' + write_script fakeeditor <<-\EOF + sed -e "s/Another message/Another edited message/g" <"$1" >"$1-" + mv "$1-" "$1" + EOF +' +test_expect_success \ + 'creating an annotated tag with -F messagefile --edit should succeed' ' + GIT_EDITOR=./fakeeditor git tag -F msgfile --edit file-annotated-tag-edit && + get_tag_msg file-annotated-tag-edit >actual && + test_cmp expect actual +' + cat >inputmsg <<EOF A message from the standard input @@ -1026,7 +1056,18 @@ test_expect_success GPG \ git tag -s -F sigblanknonlfile blanknonlfile-signed-tag && get_tag_msg blanknonlfile-signed-tag >actual && test_cmp expect actual && - git tag -v signed-tag + git tag -v blanknonlfile-signed-tag +' + +test_expect_success GPG 'signed tag with embedded PGP message' ' + cat >msg <<-\EOF && + -----BEGIN PGP MESSAGE----- + + this is not a real PGP message + -----END PGP MESSAGE----- + EOF + git tag -s -F msg confusing-pgp-message && + git tag -v confusing-pgp-message ' # messages with commented lines for signed tags: @@ -1863,13 +1904,6 @@ test_expect_success 'version sort with very long prerelease suffix' ' git tag -l --sort=version:refname ' -run_with_limited_stack () { - (ulimit -s 128 && "$@") -} - -test_lazy_prereq ULIMIT_STACK_SIZE 'run_with_limited_stack true' - -# we require ulimit, this excludes Windows test_expect_success ULIMIT_STACK_SIZE '--contains and --no-contains work in a deep repo' ' >expect && i=1 && diff --git a/t/t7005-editor.sh b/t/t7005-editor.sh index 1b530b5022..b2ca77b338 100755 --- a/t/t7005-editor.sh +++ b/t/t7005-editor.sh @@ -38,7 +38,7 @@ test_expect_success setup ' test_commit "$msg" && echo "$msg" >expect && git show -s --format=%s > actual && - test_cmp actual expect + test_cmp expect actual ' @@ -85,7 +85,7 @@ do git --exec-path=. commit --amend && git show -s --pretty=oneline | sed -e "s/^[0-9a-f]* //" >actual && - test_cmp actual expect + test_cmp expect actual ' done @@ -107,18 +107,12 @@ do git --exec-path=. commit --amend && git show -s --pretty=oneline | sed -e "s/^[0-9a-f]* //" >actual && - test_cmp actual expect + test_cmp expect actual ' done -if echo 'echo space > "$1"' > "e space.sh" -then - # FS supports spaces in filenames - test_set_prereq SPACES_IN_FILENAMES -fi - -test_expect_success SPACES_IN_FILENAMES 'editor with a space' ' - +test_expect_success 'editor with a space' ' + echo "echo space >\$1" >"e space.sh" && chmod a+x "e space.sh" && GIT_EDITOR="./e\ space.sh" git commit --amend && test space = "$(git show -s --pretty=format:%s)" @@ -126,7 +120,7 @@ test_expect_success SPACES_IN_FILENAMES 'editor with a space' ' ' unset GIT_EDITOR -test_expect_success SPACES_IN_FILENAMES 'core.editor with a space' ' +test_expect_success 'core.editor with a space' ' git config core.editor \"./e\ space.sh\" && git commit --amend && diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index f0f1abd1c2..7541ba5edb 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -110,13 +110,6 @@ test_expect_success TTY 'configuration can disable pager' ' ! test -e paginated.out ' -test_expect_success TTY 'git config uses a pager if configured to' ' - rm -f paginated.out && - test_config pager.config true && - test_terminal git config --list && - test -e paginated.out -' - test_expect_success TTY 'configuration can enable pager (from subdir)' ' rm -f paginated.out && mkdir -p subdir && @@ -214,6 +207,86 @@ test_expect_success TTY 'git tag as alias respects pager.tag with -l' ' ! test -e paginated.out ' +test_expect_success TTY 'git branch defaults to paging' ' + rm -f paginated.out && + test_terminal git branch && + test -e paginated.out +' + +test_expect_success TTY 'git branch respects pager.branch' ' + rm -f paginated.out && + test_terminal git -c pager.branch=false branch && + ! test -e paginated.out +' + +test_expect_success TTY 'git branch respects --no-pager' ' + rm -f paginated.out && + test_terminal git --no-pager branch && + ! test -e paginated.out +' + +test_expect_success TTY 'git branch --edit-description ignores pager.branch' ' + rm -f paginated.out editor.used && + write_script editor <<-\EOF && + echo "New description" >"$1" + touch editor.used + EOF + EDITOR=./editor test_terminal git -c pager.branch branch --edit-description && + ! test -e paginated.out && + test -e editor.used +' + +test_expect_success TTY 'git branch --set-upstream-to ignores pager.branch' ' + rm -f paginated.out && + git branch other && + test_when_finished "git branch -D other" && + test_terminal git -c pager.branch branch --set-upstream-to=other && + test_when_finished "git branch --unset-upstream" && + ! test -e paginated.out +' + +test_expect_success TTY 'git config ignores pager.config when setting' ' + rm -f paginated.out && + test_terminal git -c pager.config config foo.bar bar && + ! test -e paginated.out +' + +test_expect_success TTY 'git config --edit ignores pager.config' ' + rm -f paginated.out editor.used && + write_script editor <<-\EOF && + touch editor.used + EOF + EDITOR=./editor test_terminal git -c pager.config config --edit && + ! test -e paginated.out && + test -e editor.used +' + +test_expect_success TTY 'git config --get ignores pager.config' ' + rm -f paginated.out && + test_terminal git -c pager.config config --get foo.bar && + ! test -e paginated.out +' + +test_expect_success TTY 'git config --get-urlmatch defaults to paging' ' + rm -f paginated.out && + test_terminal git -c http."https://foo.com/".bar=foo \ + config --get-urlmatch http https://foo.com && + test -e paginated.out +' + +test_expect_success TTY 'git config --get-all respects pager.config' ' + rm -f paginated.out && + test_terminal git -c pager.config=false config --get-all foo.bar && + ! test -e paginated.out +' + +test_expect_success TTY 'git config --list defaults to paging' ' + rm -f paginated.out && + test_terminal git config --list && + test -e paginated.out +' + + # A colored commit log will begin with an appropriate ANSI escape # for the first color; the text "commit" comes later. colorful() { @@ -570,4 +643,18 @@ test_expect_success 'command with underscores does not complain' ' test_cmp expect actual ' +test_expect_success TTY 'git tag with auto-columns ' ' + test_commit one && + test_commit two && + test_commit three && + test_commit four && + test_commit five && + cat >expect <<-\EOF && + initial one two three four five + EOF + test_terminal env PAGER="cat >actual" COLUMNS=80 \ + git -c column.ui=auto tag --sort=authordate && + test_cmp expect actual +' + test_done diff --git a/t/t7061-wtstatus-ignore.sh b/t/t7061-wtstatus-ignore.sh index fc6013ba3c..0c394cf995 100755 --- a/t/t7061-wtstatus-ignore.sh +++ b/t/t7061-wtstatus-ignore.sh @@ -272,4 +272,15 @@ test_expect_success 'status ignored tracked directory with uncommitted file in t test_cmp expected actual ' +cat >expected <<\EOF +!! tracked/submodule/ +EOF + +test_expect_success 'status ignores submodule in excluded directory' ' + git init tracked/submodule && + test_commit -C tracked/submodule initial && + git status --porcelain --ignored -u tracked/submodule >actual && + test_cmp expected actual +' + test_done diff --git a/t/t7063-status-untracked-cache.sh b/t/t7063-status-untracked-cache.sh index e5fb892f95..c61e304e97 100755 --- a/t/t7063-status-untracked-cache.sh +++ b/t/t7063-status-untracked-cache.sh @@ -14,6 +14,9 @@ test_description='test untracked cache' # See <20160803174522.5571-1-pclouds@gmail.com> if you want to know # more. +GIT_FORCE_UNTRACKED_CACHE=true +export GIT_FORCE_UNTRACKED_CACHE + sync_mtime () { find . -type d -ls >/dev/null } @@ -22,6 +25,12 @@ avoid_racy() { sleep 1 } +status_is_clean() { + >../status.expect && + git status --porcelain >../status.actual && + test_cmp ../status.expect ../status.actual +} + test_lazy_prereq UNTRACKED_CACHE ' { git update-index --test-untracked-cache; ret=$?; } && test $ret -ne 1 @@ -683,4 +692,85 @@ test_expect_success 'untracked cache survives a commit' ' test_cmp ../before ../after ' +test_expect_success 'teardown worktree' ' + cd .. +' + +test_expect_success SYMLINKS 'setup worktree for symlink test' ' + git init worktree-symlink && + cd worktree-symlink && + git config core.untrackedCache true && + mkdir one two && + touch one/file two/file && + git add one/file two/file && + git commit -m"first commit" && + git rm -rf one && + ln -s two one && + git add one && + git commit -m"second commit" +' + +test_expect_success SYMLINKS '"status" after symlink replacement should be clean with UC=true' ' + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + status_is_clean +' + +test_expect_success SYMLINKS '"status" after symlink replacement should be clean with UC=false' ' + git config core.untrackedCache false && + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + status_is_clean +' + +test_expect_success 'setup worktree for non-symlink test' ' + git init worktree-non-symlink && + cd worktree-non-symlink && + git config core.untrackedCache true && + mkdir one two && + touch one/file two/file && + git add one/file two/file && + git commit -m"first commit" && + git rm -rf one && + cp two/file one && + git add one && + git commit -m"second commit" +' + +test_expect_success '"status" after file replacement should be clean with UC=true' ' + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + test-dump-untracked-cache >../actual && + grep -F "recurse valid" ../actual >../actual.grep && + cat >../expect.grep <<EOF && +/ 0000000000000000000000000000000000000000 recurse valid +/two/ 0000000000000000000000000000000000000000 recurse valid +EOF + status_is_clean && + test_cmp ../expect.grep ../actual.grep +' + +test_expect_success '"status" after file replacement should be clean with UC=false' ' + git config core.untrackedCache false && + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + status_is_clean +' + test_done diff --git a/t/t7064-wtstatus-pv2.sh b/t/t7064-wtstatus-pv2.sh index e319fa2e84..8f795327a0 100755 --- a/t/t7064-wtstatus-pv2.sh +++ b/t/t7064-wtstatus-pv2.sh @@ -390,6 +390,68 @@ test_expect_success 'verify upstream fields in branch header' ' ) ' +test_expect_success 'verify --[no-]ahead-behind with V2 format' ' + git checkout master && + test_when_finished "rm -rf sub_repo" && + git clone . sub_repo && + ( + ## Confirm local master tracks remote master. + cd sub_repo && + HUF=$(git rev-parse HEAD) && + + # Confirm --no-ahead-behind reports traditional branch.ab with 0/0 for equal branches. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + EOF + + git status --no-ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm --ahead-behind reports traditional branch.ab with 0/0. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + EOF + + git status --ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + ## Test non-equal ahead/behind. + echo xyz >file_xyz && + git add file_xyz && + git commit -m xyz && + + HUF=$(git rev-parse HEAD) && + + # Confirm --no-ahead-behind reports branch.ab with ?/? for non-equal branches. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +? -? + EOF + + git status --no-ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm --ahead-behind reports traditional branch.ab with 1/0. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +1 -0 + EOF + + git status --ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + test_expect_success 'create and add submodule, submodule appears clean (A. S...)' ' git checkout master && git clone . sub_repo && diff --git a/t/t7102-reset.sh b/t/t7102-reset.sh index 86f23be34a..95653a08ca 100755 --- a/t/t7102-reset.sh +++ b/t/t7102-reset.sh @@ -428,9 +428,9 @@ test_expect_success 'test --mixed <paths>' ' git reset HEAD -- file1 file2 file3 && test_must_fail git diff --quiet && git diff > output && - test_cmp output expect && + test_cmp expect output && git diff --cached > output && - test_cmp output cached_expect + test_cmp cached_expect output ' test_expect_success 'test resetting the index at give paths' ' diff --git a/t/t7201-co.sh b/t/t7201-co.sh index d4b217b0ee..76c223c967 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -187,7 +187,7 @@ test_expect_success 'format of merge conflict from checkout -m' ' d >>>>>>> local EOF - test_cmp two expect + test_cmp expect two ' test_expect_success 'checkout --merge --conflict=diff3 <branch>' ' @@ -213,7 +213,7 @@ test_expect_success 'checkout --merge --conflict=diff3 <branch>' ' d >>>>>>> local EOF - test_cmp two expect + test_cmp expect two ' test_expect_success 'switch to another branch while carrying a deletion' ' diff --git a/t/t7301-clean-interactive.sh b/t/t7301-clean-interactive.sh index 3ae394e934..1bf9789c8a 100755 --- a/t/t7301-clean-interactive.sh +++ b/t/t7301-clean-interactive.sh @@ -3,6 +3,7 @@ test_description='git clean -i basic tests' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-terminal.sh test_expect_success 'setup' ' @@ -472,4 +473,14 @@ test_expect_success 'git clean -id with prefix and path (ask)' ' ' +test_expect_success TTY 'git clean -i paints the header in HEADER color' ' + >a.out && + echo q | + test_terminal git clean -i | + test_decode_color | + head -n 1 >header && + # not i18ngrep + grep "^<BOLD>" header +' + test_done diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index e9c3335b78..152104412f 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -46,16 +46,6 @@ test_expect_success 'submodule update aborts on missing gitmodules url' ' test_must_fail git submodule init ' -test_expect_success 'configuration parsing' ' - test_when_finished "rm -f .gitmodules" && - cat >.gitmodules <<-\EOF && - [submodule "s"] - path - ignore - EOF - test_must_fail git status -' - test_expect_success 'setup - repository in init subdirectory' ' mkdir init && ( @@ -831,6 +821,21 @@ test_expect_success 'moving the superproject does not break submodules' ' ) ' +test_expect_success 'moving the submodule does not break the superproject' ' + ( + cd addtest2 && + git submodule status + ) >actual && + sed -e "s/^ \([^ ]* repo\) .*/-\1/" <actual >expect && + mv addtest2/repo addtest2/repo.bak && + test_when_finished "mv addtest2/repo.bak addtest2/repo" && + ( + cd addtest2 && + git submodule status + ) >actual && + test_cmp expect actual +' + test_expect_success 'submodule add --name allows to replace a submodule with another at the same path' ' ( cd addtest2 && @@ -1221,7 +1226,7 @@ test_expect_success 'clone --recurse-submodules with a pathspec works' ' git clone --recurse-submodules="sub0" multisuper multisuper_clone && git -C multisuper_clone submodule status |cut -c1,43- >actual && - test_cmp actual expected + test_cmp expected actual ' test_expect_success 'clone with multiple --recurse-submodules options' ' diff --git a/t/t7405-submodule-merge.sh b/t/t7405-submodule-merge.sh index 0d5b42a25b..7bfb2f498d 100755 --- a/t/t7405-submodule-merge.sh +++ b/t/t7405-submodule-merge.sh @@ -119,7 +119,7 @@ test_expect_success 'merge with one side as a fast-forward of the other' ' git ls-tree test-forward sub | cut -f1 | cut -f3 -d" " > actual && (cd sub && git rev-parse sub-d > ../expect) && - test_cmp actual expect) + test_cmp expect actual) ' test_expect_success 'merging should conflict for non fast-forward' ' diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index 034914a14f..6f083c4d68 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -406,6 +406,14 @@ test_expect_success 'submodule update - command in .git/config' ' ) ' +test_expect_success 'submodule update - command in .gitmodules is ignored' ' + test_when_finished "git -C super reset --hard HEAD^" && + git -C super config -f .gitmodules submodule.submodule.update "!false" && + git -C super commit -a -m "add command to .gitmodules file" && + git -C super/submodule reset --hard $submodulesha1^ && + git -C super submodule update submodule +' + cat << EOF >expect Execution of 'false $submodulesha1' failed in submodule path 'submodule' EOF diff --git a/t/t7409-submodule-detached-work-tree.sh b/t/t7409-submodule-detached-work-tree.sh index c20717181e..fc018e3638 100755 --- a/t/t7409-submodule-detached-work-tree.sh +++ b/t/t7409-submodule-detached-work-tree.sh @@ -6,7 +6,7 @@ test_description='Test submodules on detached working tree This test verifies that "git submodule" initialization, update and addition works -on detahced working trees +on detached working trees ' TEST_NO_CREATE_REPO=1 diff --git a/t/t7411-submodule-config.sh b/t/t7411-submodule-config.sh index eea36f1dbe..0bde5850ac 100755 --- a/t/t7411-submodule-config.sh +++ b/t/t7411-submodule-config.sh @@ -31,6 +31,21 @@ test_expect_success 'submodule config cache setup' ' ) ' +test_expect_success 'configuration parsing with error' ' + test_when_finished "rm -rf repo" && + test_create_repo repo && + cat >repo/.gitmodules <<-\EOF && + [submodule "s"] + path + ignore + EOF + ( + cd repo && + test_must_fail test-tool submodule-config "" s 2>actual && + test_i18ngrep "bad config" actual + ) +' + cat >super/expect <<EOF Submodule name: 'a' for path 'a' Submodule name: 'a' for path 'b' @@ -40,7 +55,7 @@ EOF test_expect_success 'test parsing and lookup of submodule config by path' ' (cd super && - test-submodule-config \ + test-tool submodule-config \ HEAD^ a \ HEAD b \ HEAD^ submodule \ @@ -52,7 +67,7 @@ test_expect_success 'test parsing and lookup of submodule config by path' ' test_expect_success 'test parsing and lookup of submodule config by name' ' (cd super && - test-submodule-config --name \ + test-tool submodule-config --name \ HEAD^ a \ HEAD a \ HEAD^ submodule \ @@ -74,7 +89,7 @@ test_expect_success 'error in one submodule config lets continue' ' git add .gitmodules && mv .gitmodules.bak .gitmodules && git commit -m "add error" && - test-submodule-config \ + test-tool submodule-config \ HEAD b \ HEAD submodule \ >actual && @@ -85,7 +100,7 @@ test_expect_success 'error in one submodule config lets continue' ' test_expect_success 'error message contains blob reference' ' (cd super && sha1=$(git rev-parse HEAD) && - test-submodule-config \ + test-tool submodule-config \ HEAD b \ HEAD submodule \ 2>actual_err && @@ -99,86 +114,14 @@ test_expect_success 'using different treeishs works' ' git tag new_tag && tree=$(git rev-parse HEAD^{tree}) && commit=$(git rev-parse HEAD^{commit}) && - test-submodule-config $commit b >expect && - test-submodule-config $tree b >actual.1 && - test-submodule-config new_tag b >actual.2 && + test-tool submodule-config $commit b >expect && + test-tool submodule-config $tree b >actual.1 && + test-tool submodule-config new_tag b >actual.2 && test_cmp expect actual.1 && test_cmp expect actual.2 ) ' -cat >super/expect_url <<EOF -Submodule url: 'git@somewhere.else.net:a.git' for path 'b' -Submodule url: 'git@somewhere.else.net:submodule.git' for path 'submodule' -EOF - -cat >super/expect_local_path <<EOF -Submodule name: 'a' for path 'c' -Submodule name: 'submodule' for path 'submodule' -EOF - -test_expect_success 'reading of local configuration' ' - (cd super && - old_a=$(git config submodule.a.url) && - old_submodule=$(git config submodule.submodule.url) && - git config submodule.a.url git@somewhere.else.net:a.git && - git config submodule.submodule.url git@somewhere.else.net:submodule.git && - test-submodule-config --url \ - "" b \ - "" submodule \ - >actual && - test_cmp expect_url actual && - git config submodule.a.path c && - test-submodule-config \ - "" c \ - "" submodule \ - >actual && - test_cmp expect_local_path actual && - git config submodule.a.url "$old_a" && - git config submodule.submodule.url "$old_submodule" && - git config --unset submodule.a.path c - ) -' - -cat >super/expect_url <<EOF -Submodule url: '../submodule' for path 'b' -Submodule url: 'git@somewhere.else.net:submodule.git' for path 'submodule' -EOF - -test_expect_success 'reading of local configuration for uninitialized submodules' ' - ( - cd super && - git submodule deinit -f b && - old_submodule=$(git config submodule.submodule.url) && - git config submodule.submodule.url git@somewhere.else.net:submodule.git && - test-submodule-config --url \ - "" b \ - "" submodule \ - >actual && - test_cmp expect_url actual && - git config submodule.submodule.url "$old_submodule" && - git submodule init b - ) -' - -cat >super/expect_fetchrecurse_die.err <<EOF -fatal: bad submodule.submodule.fetchrecursesubmodules argument: blabla -EOF - -test_expect_success 'local error in fetchrecursesubmodule dies early' ' - (cd super && - git config submodule.submodule.fetchrecursesubmodules blabla && - test_must_fail test-submodule-config \ - "" b \ - "" submodule \ - >actual.out 2>actual.err && - touch expect_fetchrecurse_die.out && - test_cmp expect_fetchrecurse_die.out actual.out && - test_cmp expect_fetchrecurse_die.err actual.err && - git config --unset submodule.submodule.fetchrecursesubmodules - ) -' - test_expect_success 'error in history in fetchrecursesubmodule lets continue' ' (cd super && git config -f .gitmodules \ @@ -187,7 +130,7 @@ test_expect_success 'error in history in fetchrecursesubmodule lets continue' ' git config --unset -f .gitmodules \ submodule.submodule.fetchrecursesubmodules && git commit -m "add error in fetchrecursesubmodules" && - test-submodule-config \ + test-tool submodule-config \ HEAD b \ HEAD submodule \ >actual && diff --git a/t/t7500-commit.sh b/t/t7500-commit.sh index 5739d3ed23..170b4810e0 100755 --- a/t/t7500-commit.sh +++ b/t/t7500-commit.sh @@ -130,8 +130,8 @@ EOF test_expect_success 'commit message from template with whitespace issue' ' echo "content galore" >>foo && git add foo && - GIT_EDITOR="$TEST_DIRECTORY"/t7500/add-whitespaced-content git commit \ - --template "$TEMPLATE" && + GIT_EDITOR=\""$TEST_DIRECTORY"\"/t7500/add-whitespaced-content \ + git commit --template "$TEMPLATE" && commit_msg_is "commit message" ' @@ -272,6 +272,14 @@ test_expect_success 'commit --fixup provides correct one-line commit message' ' commit_msg_is "fixup! target message subject line" ' +test_expect_success 'commit --fixup -m"something" -m"extra"' ' + commit_for_rebase_autosquash_setup && + git commit --fixup HEAD~1 -m"something" -m"extra" && + commit_msg_is "fixup! target message subject linesomething + +extra" +' + test_expect_success 'commit --squash works with -F' ' commit_for_rebase_autosquash_setup && echo "log message from file" >msgfile && @@ -325,7 +333,6 @@ test_expect_success 'invalid message options when using --fixup' ' test_must_fail git commit --fixup HEAD~1 --squash HEAD~2 && test_must_fail git commit --fixup HEAD~1 -C HEAD~2 && test_must_fail git commit --fixup HEAD~1 -c HEAD~2 && - test_must_fail git commit --fixup HEAD~1 -m "cmdline message" && test_must_fail git commit --fixup HEAD~1 -F log ' diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index fa61b1a4ee..9dbbd01fc0 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -52,6 +52,18 @@ test_expect_success PERL 'can use paths with --interactive' ' git reset --hard HEAD^ ' +test_expect_success 'removed files and relative paths' ' + test_when_finished "rm -rf foo" && + git init foo && + >foo/foo.txt && + git -C foo add foo.txt && + git -C foo commit -m first && + git -C foo rm foo.txt && + + mkdir -p foo/bar && + git -C foo/bar commit -m second ../foo.txt +' + test_expect_success 'using invalid commit with -C' ' test_must_fail git commit --allow-empty -C bogus ' diff --git a/t/t7504-commit-msg-hook.sh b/t/t7504-commit-msg-hook.sh index 88d4cda299..302a3a2082 100755 --- a/t/t7504-commit-msg-hook.sh +++ b/t/t7504-commit-msg-hook.sh @@ -101,6 +101,10 @@ cat > "$HOOK" <<EOF exit 1 EOF +commit_msg_is () { + test "$(git log --pretty=format:%s%b -1)" = "$1" +} + test_expect_success 'with failing hook' ' echo "another" >> file && @@ -135,6 +139,32 @@ test_expect_success '--no-verify with failing hook (editor)' ' ' +test_expect_success 'merge fails with failing hook' ' + + test_when_finished "git branch -D newbranch" && + test_when_finished "git checkout -f master" && + git checkout --orphan newbranch && + : >file2 && + git add file2 && + git commit --no-verify file2 -m in-side-branch && + test_must_fail git merge --allow-unrelated-histories master && + commit_msg_is "in-side-branch" # HEAD before merge + +' + +test_expect_success 'merge bypasses failing hook with --no-verify' ' + + test_when_finished "git branch -D newbranch" && + test_when_finished "git checkout -f master" && + git checkout --orphan newbranch && + : >file2 && + git add file2 && + git commit --no-verify file2 -m in-side-branch && + git merge --no-verify --allow-unrelated-histories master && + commit_msg_is "Merge branch '\''master'\'' into newbranch" +' + + chmod -x "$HOOK" test_expect_success POSIXPERM 'with non-executable hook' ' @@ -178,10 +208,6 @@ exit 0 EOF chmod +x "$HOOK" -commit_msg_is () { - test "$(git log --pretty=format:%s%b -1)" = "$1" -} - test_expect_success 'hook edits commit message' ' echo "additional" >> file && @@ -217,7 +243,36 @@ test_expect_success "hook doesn't edit commit message (editor)" ' echo "more plus" > FAKE_MSG && GIT_EDITOR="\"\$FAKE_EDITOR\"" git commit --no-verify && commit_msg_is "more plus" +' +test_expect_success 'hook called in git-merge picks up commit message' ' + test_when_finished "git branch -D newbranch" && + test_when_finished "git checkout -f master" && + git checkout --orphan newbranch && + : >file2 && + git add file2 && + git commit --no-verify file2 -m in-side-branch && + git merge --allow-unrelated-histories master && + commit_msg_is "new message" +' + +test_expect_failure 'merge --continue remembers --no-verify' ' + test_when_finished "git branch -D newbranch" && + test_when_finished "git checkout -f master" && + git checkout master && + echo a >file2 && + git add file2 && + git commit --no-verify -m "add file2 to master" && + git checkout -b newbranch master^ && + echo b >file2 && + git add file2 && + git commit --no-verify file2 -m in-side-branch && + git merge --no-verify -m not-rewritten-by-hook master && + # resolve conflict: + echo c >file2 && + git add file2 && + git merge --continue && + commit_msg_is not-rewritten-by-hook ' # set up fake editor to replace `pick` by `reword` @@ -237,4 +292,5 @@ test_expect_success 'hook is called for reword during `rebase -i`' ' ' + test_done diff --git a/t/t7505-prepare-commit-msg-hook.sh b/t/t7505-prepare-commit-msg-hook.sh index b13f72975e..1f43b3cd4c 100755 --- a/t/t7505-prepare-commit-msg-hook.sh +++ b/t/t7505-prepare-commit-msg-hook.sh @@ -4,6 +4,38 @@ test_description='prepare-commit-msg hook' . ./test-lib.sh +test_expect_success 'set up commits for rebasing' ' + test_commit root && + test_commit a a a && + test_commit b b b && + git checkout -b rebase-me root && + test_commit rebase-a a aa && + test_commit rebase-b b bb && + for i in $(test_seq 1 13) + do + test_commit rebase-$i c $i + done && + git checkout master && + + cat >rebase-todo <<-EOF + pick $(git rev-parse rebase-a) + pick $(git rev-parse rebase-b) + fixup $(git rev-parse rebase-1) + fixup $(git rev-parse rebase-2) + pick $(git rev-parse rebase-3) + fixup $(git rev-parse rebase-4) + squash $(git rev-parse rebase-5) + reword $(git rev-parse rebase-6) + squash $(git rev-parse rebase-7) + fixup $(git rev-parse rebase-8) + fixup $(git rev-parse rebase-9) + edit $(git rev-parse rebase-10) + squash $(git rev-parse rebase-11) + squash $(git rev-parse rebase-12) + edit $(git rev-parse rebase-13) + EOF +' + test_expect_success 'with no hook' ' echo "foo" > file && @@ -31,17 +63,41 @@ mkdir -p "$HOOKDIR" echo "#!$SHELL_PATH" > "$HOOK" cat >> "$HOOK" <<'EOF' -if test "$2" = commit; then - source=$(git rev-parse "$3") +GIT_DIR=$(git rev-parse --git-dir) +if test -d "$GIT_DIR/rebase-merge" +then + rebasing=1 else - source=${2-default} + rebasing=0 fi -if test "$GIT_EDITOR" = :; then - sed -e "1s/.*/$source (no editor)/" "$1" > msg.tmp + +get_last_cmd () { + tail -n1 "$GIT_DIR/rebase-merge/done" | { + read cmd id _ + git log --pretty="[$cmd %s]" -n1 $id + } +} + +if test "$2" = commit +then + if test $rebasing = 1 + then + source="$3" + else + source=$(git rev-parse "$3") + fi else - sed -e "1s/.*/$source/" "$1" > msg.tmp + source=${2-default} +fi +test "$GIT_EDITOR" = : && source="$source (no editor)" + +if test $rebasing = 1 +then + echo "$source $(get_last_cmd)" >"$1" +else + sed -e "1s/.*/$source/" "$1" >msg.tmp + mv msg.tmp "$1" fi -mv msg.tmp "$1" exit 0 EOF chmod +x "$HOOK" @@ -156,6 +212,63 @@ test_expect_success 'with hook and editor (merge)' ' test "$(git log -1 --pretty=format:%s)" = "merge" ' +test_rebase () { + expect=$1 && + mode=$2 && + test_expect_$expect C_LOCALE_OUTPUT "with hook (rebase $mode)" ' + test_when_finished "\ + git rebase --abort + git checkout -f master + git branch -D tmp" && + git checkout -b tmp rebase-me && + GIT_SEQUENCE_EDITOR="cp rebase-todo" && + GIT_EDITOR="\"$FAKE_EDITOR\"" && + ( + export GIT_SEQUENCE_EDITOR GIT_EDITOR && + test_must_fail git rebase $mode b && + echo x >a && + git add a && + test_must_fail git rebase --continue && + echo x >b && + git add b && + git commit && + git rebase --continue && + echo y >a && + git add a && + git commit && + git rebase --continue && + echo y >b && + git add b && + git rebase --continue + ) && + if test $mode = -p # reword amended after pick + then + n=18 + else + n=17 + fi && + git log --pretty=%s -g -n$n HEAD@{1} >actual && + test_cmp "$TEST_DIRECTORY/t7505/expected-rebase$mode" actual + ' +} + +test_rebase success -i +test_rebase success -p + +test_expect_success 'with hook (cherry-pick)' ' + test_when_finished "git checkout -f master" && + git checkout -B other b && + git cherry-pick rebase-1 && + test "$(git log -1 --pretty=format:%s)" = "message (no editor)" +' + +test_expect_success 'with hook and editor (cherry-pick)' ' + test_when_finished "git checkout -f master" && + git checkout -B other b && + git cherry-pick -e rebase-1 && + test "$(git log -1 --pretty=format:%s)" = merge +' + cat > "$HOOK" <<'EOF' #!/bin/sh exit 1 @@ -197,4 +310,11 @@ test_expect_success 'with failing hook (merge)' ' ' +test_expect_success C_LOCALE_OUTPUT 'with failing hook (cherry-pick)' ' + test_when_finished "git checkout -f master" && + git checkout -B other b && + test_must_fail git cherry-pick rebase-1 2>actual && + test $(grep -c prepare-commit-msg actual) = 1 +' + test_done diff --git a/t/t7505/expected-rebase-i b/t/t7505/expected-rebase-i new file mode 100644 index 0000000000..c514bdbb94 --- /dev/null +++ b/t/t7505/expected-rebase-i @@ -0,0 +1,17 @@ +message [edit rebase-13] +message (no editor) [edit rebase-13] +message [squash rebase-12] +message (no editor) [squash rebase-11] +default [edit rebase-10] +message (no editor) [edit rebase-10] +message [fixup rebase-9] +message (no editor) [fixup rebase-8] +message (no editor) [squash rebase-7] +message [reword rebase-6] +message [squash rebase-5] +message (no editor) [fixup rebase-4] +message (no editor) [pick rebase-3] +message (no editor) [fixup rebase-2] +message (no editor) [fixup rebase-1] +merge [pick rebase-b] +message [pick rebase-a] diff --git a/t/t7505/expected-rebase-p b/t/t7505/expected-rebase-p new file mode 100644 index 0000000000..93bada596e --- /dev/null +++ b/t/t7505/expected-rebase-p @@ -0,0 +1,18 @@ +message [edit rebase-13] +message (no editor) [edit rebase-13] +message [squash rebase-12] +message (no editor) [squash rebase-11] +default [edit rebase-10] +message (no editor) [edit rebase-10] +message [fixup rebase-9] +message (no editor) [fixup rebase-8] +message (no editor) [squash rebase-7] +HEAD [reword rebase-6] +message (no editor) [reword rebase-6] +message [squash rebase-5] +message (no editor) [fixup rebase-4] +message (no editor) [pick rebase-3] +message (no editor) [fixup rebase-2] +message (no editor) [fixup rebase-1] +merge [pick rebase-b] +message [pick rebase-a] diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh index 055c90736e..9edf6572ed 100755 --- a/t/t7506-status-submodule.sh +++ b/t/t7506-status-submodule.sh @@ -306,7 +306,7 @@ test_expect_success 'diff with merge conflict in .gitmodules' ' cd super && git diff >../diff_actual 2>&1 ) && - test_cmp diff_actual diff_expect + test_cmp diff_expect diff_actual ' test_expect_success 'diff --submodule with merge conflict in .gitmodules' ' @@ -314,7 +314,7 @@ test_expect_success 'diff --submodule with merge conflict in .gitmodules' ' cd super && git diff --submodule >../diff_submodule_actual 2>&1 ) && - test_cmp diff_submodule_actual diff_submodule_expect + test_cmp diff_submodule_expect diff_submodule_actual ' # We'll setup different cases for further testing: diff --git a/t/t7508-status.sh b/t/t7508-status.sh index a3d760e63a..18a40257fb 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -1671,4 +1671,14 @@ test_expect_success '"Initial commit" should not be noted in commit template' ' test_i18ngrep ! "Initial commit" output ' +test_expect_success '--no-optional-locks prevents index update' ' + test-tool chmtime =1234567890 .git/index && + git --no-optional-locks status && + test-tool chmtime --get .git/index >out && + grep ^1234567890 out && + git status && + test-tool chmtime --get .git/index >out && + ! grep ^1234567890 out +' + test_done diff --git a/t/t7513-interpret-trailers.sh b/t/t7513-interpret-trailers.sh index 0c6f91c433..164719d1c9 100755 --- a/t/t7513-interpret-trailers.sh +++ b/t/t7513-interpret-trailers.sh @@ -681,6 +681,36 @@ test_expect_success 'using "where = before"' ' test_cmp expected actual ' +test_expect_success 'overriding configuration with "--where after"' ' + git config trailer.ack.where "before" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Fixes: Z + Acked-by= Z + Acked-by= Peff + Reviewed-by: Z + Signed-off-by: Z + EOF + git interpret-trailers --where after --trailer "ack: Peff" \ + complex_message >actual && + test_cmp expected actual +' + +test_expect_success 'using "where = before" with "--no-where"' ' + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Fixes: Z + Acked-by= Peff + Acked-by= Z + Reviewed-by: Z + Signed-off-by: Z + EOF + git interpret-trailers --where after --no-where --trailer "ack: Peff" \ + --trailer "bug: 42" complex_message >actual && + test_cmp expected actual +' + test_expect_success 'using "where = after"' ' git config trailer.ack.where "after" && cat complex_message_body >expected && @@ -947,6 +977,23 @@ test_expect_success 'using "ifExists = add" with "where = after"' ' test_cmp expected actual ' +test_expect_success 'overriding configuration with "--if-exists replace"' ' + git config trailer.fix.key "Fixes: " && + git config trailer.fix.ifExists "add" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Bug #42 + Acked-by= Z + Reviewed-by: + Signed-off-by: Z + Fixes: 22 + EOF + git interpret-trailers --if-exists replace --trailer "review:" \ + --trailer "fix=53" --trailer "fix=22" --trailer "bug: 42" \ + <complex_message >actual && + test_cmp expected actual +' + test_expect_success 'using "ifExists = replace"' ' git config trailer.fix.key "Fixes: " && git config trailer.fix.ifExists "replace" && @@ -1026,6 +1073,25 @@ test_expect_success 'the default is "ifMissing = add"' ' test_cmp expected actual ' +test_expect_success 'overriding configuration with "--if-missing doNothing"' ' + git config trailer.ifmissing "add" && + cat complex_message_body >expected && + sed -e "s/ Z\$/ /" >>expected <<-\EOF && + Fixes: Z + Acked-by= Z + Acked-by= Junio + Acked-by= Peff + Reviewed-by: + Signed-off-by: Z + EOF + git interpret-trailers --if-missing doNothing \ + --trailer "review:" --trailer "fix=53" \ + --trailer "cc=Linus" --trailer "ack: Junio" \ + --trailer "fix=22" --trailer "bug: 42" --trailer "ack: Peff" \ + <complex_message >actual && + test_cmp expected actual +' + test_expect_success 'when default "ifMissing" is "doNothing"' ' git config trailer.ifmissing "doNothing" && cat complex_message_body >expected && @@ -1275,4 +1341,80 @@ test_expect_success 'with cut line' ' test_cmp expected actual ' +test_expect_success 'only trailers' ' + git config trailer.sign.command "echo config-value" && + cat >expected <<-\EOF && + existing: existing-value + sign: config-value + added: added-value + EOF + git interpret-trailers \ + --trailer added:added-value \ + --only-trailers >actual <<-\EOF && + my subject + + my body + + existing: existing-value + EOF + test_cmp expected actual +' + +test_expect_success 'only-trailers omits non-trailer in middle of block' ' + git config trailer.sign.command "echo config-value" && + cat >expected <<-\EOF && + Signed-off-by: nobody <nobody@nowhere> + Signed-off-by: somebody <somebody@somewhere> + sign: config-value + EOF + git interpret-trailers --only-trailers >actual <<-\EOF && + subject + + it is important that the trailers below are signed-off-by + so that they meet the "25% trailers Git knows about" heuristic + + Signed-off-by: nobody <nobody@nowhere> + this is not a trailer + Signed-off-by: somebody <somebody@somewhere> + EOF + test_cmp expected actual +' + +test_expect_success 'only input' ' + git config trailer.sign.command "echo config-value" && + cat >expected <<-\EOF && + existing: existing-value + EOF + git interpret-trailers \ + --only-trailers --only-input >actual <<-\EOF && + my subject + + my body + + existing: existing-value + EOF + test_cmp expected actual +' + +test_expect_success 'unfold' ' + cat >expected <<-\EOF && + foo: continued across several lines + EOF + # pass through tr to make leading and trailing whitespace more obvious + tr _ " " <<-\EOF | + my subject + + my body + + foo:_ + __continued + ___across + ____several + _____lines + ___ + EOF + git interpret-trailers --only-trailers --only-input --unfold >actual && + test_cmp expected actual +' + test_done diff --git a/t/t7519-status-fsmonitor.sh b/t/t7519-status-fsmonitor.sh new file mode 100755 index 0000000000..756beb0d8e --- /dev/null +++ b/t/t7519-status-fsmonitor.sh @@ -0,0 +1,356 @@ +#!/bin/sh + +test_description='git status with file system watcher' + +. ./test-lib.sh + +# +# To run the entire git test suite using fsmonitor: +# +# copy t/t7519/fsmonitor-all to a location in your path and then set +# GIT_FSMONITOR_TEST=fsmonitor-all and run your tests. +# + +# Note, after "git reset --hard HEAD" no extensions exist other than 'TREE' +# "git update-index --fsmonitor" can be used to get the extension written +# before testing the results. + +clean_repo () { + git reset --hard HEAD && + git clean -fd +} + +dirty_repo () { + : >untracked && + : >dir1/untracked && + : >dir2/untracked && + echo 1 >modified && + echo 2 >dir1/modified && + echo 3 >dir2/modified && + echo 4 >new && + echo 5 >dir1/new && + echo 6 >dir2/new +} + +write_integration_script () { + write_script .git/hooks/fsmonitor-test<<-\EOF + if test "$#" -ne 2 + then + echo "$0: exactly 2 arguments expected" + exit 2 + fi + if test "$1" != 1 + then + echo "Unsupported core.fsmonitor hook version." >&2 + exit 1 + fi + printf "untracked\0" + printf "dir1/untracked\0" + printf "dir2/untracked\0" + printf "modified\0" + printf "dir1/modified\0" + printf "dir2/modified\0" + printf "new\0" + printf "dir1/new\0" + printf "dir2/new\0" + EOF +} + +test_lazy_prereq UNTRACKED_CACHE ' + { git update-index --test-untracked-cache; ret=$?; } && + test $ret -ne 1 +' + +test_expect_success 'setup' ' + mkdir -p .git/hooks && + : >tracked && + : >modified && + mkdir dir1 && + : >dir1/tracked && + : >dir1/modified && + mkdir dir2 && + : >dir2/tracked && + : >dir2/modified && + git -c core.fsmonitor= add . && + git -c core.fsmonitor= commit -m initial && + git config core.fsmonitor .git/hooks/fsmonitor-test && + cat >.gitignore <<-\EOF + .gitignore + expect* + actual* + marker* + EOF +' + +# test that the fsmonitor extension is off by default +test_expect_success 'fsmonitor extension is off by default' ' + test-dump-fsmonitor >actual && + grep "^no fsmonitor" actual +' + +# test that "update-index --fsmonitor" adds the fsmonitor extension +test_expect_success 'update-index --fsmonitor" adds the fsmonitor extension' ' + git update-index --fsmonitor && + test-dump-fsmonitor >actual && + grep "^fsmonitor last update" actual +' + +# test that "update-index --no-fsmonitor" removes the fsmonitor extension +test_expect_success 'update-index --no-fsmonitor" removes the fsmonitor extension' ' + git update-index --no-fsmonitor && + test-dump-fsmonitor >actual && + grep "^no fsmonitor" actual +' + +cat >expect <<EOF && +h dir1/modified +H dir1/tracked +h dir2/modified +H dir2/tracked +h modified +H tracked +EOF + +# test that "update-index --fsmonitor-valid" sets the fsmonitor valid bit +test_expect_success 'update-index --fsmonitor-valid" sets the fsmonitor valid bit' ' + git update-index --fsmonitor && + git update-index --fsmonitor-valid dir1/modified && + git update-index --fsmonitor-valid dir2/modified && + git update-index --fsmonitor-valid modified && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +H dir1/tracked +H dir2/modified +H dir2/tracked +H modified +H tracked +EOF + +# test that "update-index --no-fsmonitor-valid" clears the fsmonitor valid bit +test_expect_success 'update-index --no-fsmonitor-valid" clears the fsmonitor valid bit' ' + git update-index --no-fsmonitor-valid dir1/modified && + git update-index --no-fsmonitor-valid dir2/modified && + git update-index --no-fsmonitor-valid modified && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +H dir1/tracked +H dir2/modified +H dir2/tracked +H modified +H tracked +EOF + +# test that all files returned by the script get flagged as invalid +test_expect_success 'all files returned by integration script get flagged as invalid' ' + write_integration_script && + dirty_repo && + git update-index --fsmonitor && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +h dir1/new +H dir1/tracked +H dir2/modified +h dir2/new +H dir2/tracked +H modified +h new +H tracked +EOF + +# test that newly added files are marked valid +test_expect_success 'newly added files are marked valid' ' + git add new && + git add dir1/new && + git add dir2/new && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +h dir1/new +h dir1/tracked +H dir2/modified +h dir2/new +h dir2/tracked +H modified +h new +h tracked +EOF + +# test that all unmodified files get marked valid +test_expect_success 'all unmodified files get marked valid' ' + # modified files result in update-index returning 1 + test_must_fail git update-index --refresh --force-write-index && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +h dir1/tracked +h dir2/modified +h dir2/tracked +h modified +h tracked +EOF + +# test that *only* files returned by the integration script get flagged as invalid +test_expect_success '*only* files returned by the integration script get flagged as invalid' ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "dir1/modified\0" + EOF + clean_repo && + git update-index --refresh --force-write-index && + echo 1 >modified && + echo 2 >dir1/modified && + echo 3 >dir2/modified && + test_must_fail git update-index --refresh --force-write-index && + git ls-files -f >actual && + test_cmp expect actual +' + +# Ensure commands that call refresh_index() to move the index back in time +# properly invalidate the fsmonitor cache +test_expect_success 'refresh_index() invalidates fsmonitor cache' ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + EOF + clean_repo && + dirty_repo && + git add . && + git commit -m "to reset" && + git reset HEAD~1 && + git status >actual && + git -c core.fsmonitor= status >expect && + test_i18ncmp expect actual +' + +# test fsmonitor with and without preloadIndex +preload_values="false true" +for preload_val in $preload_values +do + test_expect_success "setup preloadIndex to $preload_val" ' + git config core.preloadIndex $preload_val && + if test $preload_val = true + then + GIT_FORCE_PRELOAD_TEST=$preload_val; export GIT_FORCE_PRELOAD_TEST + else + unset GIT_FORCE_PRELOAD_TEST + fi + ' + + # test fsmonitor with and without the untracked cache (if available) + uc_values="false" + test_have_prereq UNTRACKED_CACHE && uc_values="false true" + for uc_val in $uc_values + do + test_expect_success "setup untracked cache to $uc_val" ' + git config core.untrackedcache $uc_val + ' + + # Status is well tested elsewhere so we'll just ensure that the results are + # the same when using core.fsmonitor. + test_expect_success 'compare status with and without fsmonitor' ' + write_integration_script && + clean_repo && + dirty_repo && + git add new && + git add dir1/new && + git add dir2/new && + git status >actual && + git -c core.fsmonitor= status >expect && + test_i18ncmp expect actual + ' + + # Make sure it's actually skipping the check for modified and untracked + # (if enabled) files unless it is told about them. + test_expect_success "status doesn't detect unreported modifications" ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + :>marker + EOF + clean_repo && + git status && + test_path_is_file marker && + dirty_repo && + rm -f marker && + git status >actual && + test_path_is_file marker && + test_i18ngrep ! "Changes not staged for commit:" actual && + if test $uc_val = true + then + test_i18ngrep ! "Untracked files:" actual + fi && + if test $uc_val = false + then + test_i18ngrep "Untracked files:" actual + fi && + rm -f marker + ' + done +done + +# test that splitting the index dosn't interfere +test_expect_success 'splitting the index results in the same state' ' + write_integration_script && + dirty_repo && + git update-index --fsmonitor && + git ls-files -f >expect && + test-dump-fsmonitor >&2 && echo && + git update-index --fsmonitor --split-index && + test-dump-fsmonitor >&2 && echo && + git ls-files -f >actual && + test_cmp expect actual +' + +test_expect_success UNTRACKED_CACHE 'ignore .git changes when invalidating UNTR' ' + test_create_repo dot-git && + ( + cd dot-git && + mkdir -p .git/hooks && + : >tracked && + : >modified && + mkdir dir1 && + : >dir1/tracked && + : >dir1/modified && + mkdir dir2 && + : >dir2/tracked && + : >dir2/modified && + write_integration_script && + git config core.fsmonitor .git/hooks/fsmonitor-test && + git update-index --untracked-cache && + git update-index --fsmonitor && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace-before" \ + git status && + test-dump-untracked-cache >../before + ) && + cat >>dot-git/.git/hooks/fsmonitor-test <<-\EOF && + printf ".git\0" + printf ".git/index\0" + printf "dir1/.git\0" + printf "dir1/.git/index\0" + EOF + ( + cd dot-git && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace-after" \ + git status && + test-dump-untracked-cache >../after + ) && + grep "directory invalidation" trace-before >>before && + grep "directory invalidation" trace-after >>after && + # UNTR extension unchanged, dir invalidation count unchanged + test_cmp before after +' + +test_done diff --git a/t/t7519/fsmonitor-all b/t/t7519/fsmonitor-all new file mode 100755 index 0000000000..691bc94dc2 --- /dev/null +++ b/t/t7519/fsmonitor-all @@ -0,0 +1,24 @@ +#!/bin/sh +# +# An test hook script to integrate with git to test fsmonitor. +# +# The hook is passed a version (currently 1) and a time in nanoseconds +# formatted as a string and outputs to stdout all files that have been +# modified since the given time. Paths must be relative to the root of +# the working tree and separated by a single NUL. +# +#echo "$0 $*" >&2 + +if test "$#" -ne 2 +then + echo "$0: exactly 2 arguments expected" >&2 + exit 2 +fi + +if test "$1" != 1 +then + echo "Unsupported core.fsmonitor hook version." >&2 + exit 1 +fi + +echo "/" diff --git a/t/t7519/fsmonitor-none b/t/t7519/fsmonitor-none new file mode 100755 index 0000000000..ed9cf5a6a9 --- /dev/null +++ b/t/t7519/fsmonitor-none @@ -0,0 +1,22 @@ +#!/bin/sh +# +# An test hook script to integrate with git to test fsmonitor. +# +# The hook is passed a version (currently 1) and a time in nanoseconds +# formatted as a string and outputs to stdout all files that have been +# modified since the given time. Paths must be relative to the root of +# the working tree and separated by a single NUL. +# +#echo "$0 $*" >&2 + +if test "$#" -ne 2 +then + echo "$0: exactly 2 arguments expected" >&2 + exit 2 +fi + +if test "$1" != 1 +then + echo "Unsupported core.fsmonitor hook version." >&2 + exit 1 +fi diff --git a/t/t7519/fsmonitor-watchman b/t/t7519/fsmonitor-watchman new file mode 100755 index 0000000000..5514edcf68 --- /dev/null +++ b/t/t7519/fsmonitor-watchman @@ -0,0 +1,133 @@ +#!/usr/bin/perl + +use strict; +use warnings; +use IPC::Open2; + +# An example hook script to integrate Watchman +# (https://facebook.github.io/watchman/) with git to speed up detecting +# new and modified files. +# +# The hook is passed a version (currently 1) and a time in nanoseconds +# formatted as a string and outputs to stdout all files that have been +# modified since the given time. Paths must be relative to the root of +# the working tree and separated by a single NUL. +# +# To enable this hook, rename this file to "query-watchman" and set +# 'git config core.fsmonitor .git/hooks/query-watchman' +# +my ($version, $time) = @ARGV; +#print STDERR "$0 $version $time\n"; + +# Check the hook interface version + +if ($version == 1) { + # convert nanoseconds to seconds + $time = int $time / 1000000000; +} else { + die "Unsupported query-fsmonitor hook version '$version'.\n" . + "Falling back to scanning...\n"; +} + +my $git_work_tree; +if ($^O =~ 'msys' || $^O =~ 'cygwin') { + $git_work_tree = Win32::GetCwd(); + $git_work_tree =~ tr/\\/\//; +} else { + require Cwd; + $git_work_tree = Cwd::cwd(); +} + +my $retry = 1; + +launch_watchman(); + +sub launch_watchman { + + my $pid = open2(\*CHLD_OUT, \*CHLD_IN, 'watchman -j') + or die "open2() failed: $!\n" . + "Falling back to scanning...\n"; + + # In the query expression below we're asking for names of files that + # changed since $time but were not transient (ie created after + # $time but no longer exist). + # + # To accomplish this, we're using the "since" generator to use the + # recency index to select candidate nodes and "fields" to limit the + # output to file names only. Then we're using the "expression" term to + # further constrain the results. + # + # The category of transient files that we want to ignore will have a + # creation clock (cclock) newer than $time_t value and will also not + # currently exist. + + my $query = <<" END"; + ["query", "$git_work_tree", { + "since": $time, + "fields": ["name"], + "expression": ["not", ["allof", ["since", $time, "cclock"], ["not", "exists"]]] + }] + END + + open (my $fh, ">", ".git/watchman-query.json"); + print $fh $query; + close $fh; + + print CHLD_IN $query; + close CHLD_IN; + my $response = do {local $/; <CHLD_OUT>}; + + open ($fh, ">", ".git/watchman-response.json"); + print $fh $response; + close $fh; + + die "Watchman: command returned no output.\n" . + "Falling back to scanning...\n" if $response eq ""; + die "Watchman: command returned invalid output: $response\n" . + "Falling back to scanning...\n" unless $response =~ /^\{/; + + my $json_pkg; + eval { + require JSON::XS; + $json_pkg = "JSON::XS"; + 1; + } or do { + require JSON::PP; + $json_pkg = "JSON::PP"; + }; + + my $o = $json_pkg->new->utf8->decode($response); + + if ($retry > 0 and $o->{error} and $o->{error} =~ m/unable to resolve root .* directory (.*) is not watched/) { + print STDERR "Adding '$git_work_tree' to watchman's watch list.\n"; + $retry--; + qx/watchman watch "$git_work_tree"/; + die "Failed to make watchman watch '$git_work_tree'.\n" . + "Falling back to scanning...\n" if $? != 0; + + # Watchman will always return all files on the first query so + # return the fast "everything is dirty" flag to git and do the + # Watchman query just to get it over with now so we won't pay + # the cost in git to look up each individual file. + + open ($fh, ">", ".git/watchman-output.out"); + print "/\0"; + close $fh; + + print "/\0"; + eval { launch_watchman() }; + exit 0; + } + + die "Watchman: $o->{error}.\n" . + "Falling back to scanning...\n" if $o->{error}; + + open ($fh, ">", ".git/watchman-output.out"); + binmode $fh, ":utf8"; + print $fh @{$o->{files}}; + close $fh; + + binmode STDOUT, ":utf8"; + local $, = "\0"; + print @{$o->{files}}; +} diff --git a/t/t7520-ignored-hook-warning.sh b/t/t7520-ignored-hook-warning.sh new file mode 100755 index 0000000000..634fb7f23a --- /dev/null +++ b/t/t7520-ignored-hook-warning.sh @@ -0,0 +1,41 @@ +#!/bin/sh + +test_description='ignored hook warning' + +. ./test-lib.sh + +test_expect_success setup ' + hookdir="$(git rev-parse --git-dir)/hooks" && + hook="$hookdir/pre-commit" && + mkdir -p "$hookdir" && + write_script "$hook" <<-\EOF + exit 0 + EOF +' + +test_expect_success 'no warning if hook is not ignored' ' + git commit --allow-empty -m "more" 2>message && + test_i18ngrep ! -e "hook was ignored" message +' + +test_expect_success POSIXPERM 'warning if hook is ignored' ' + chmod -x "$hook" && + git commit --allow-empty -m "even more" 2>message && + test_i18ngrep -e "hook was ignored" message +' + +test_expect_success POSIXPERM 'no warning if advice.ignoredHook set to false' ' + test_config advice.ignoredHook false && + chmod -x "$hook" && + git commit --allow-empty -m "even more" 2>message && + test_i18ngrep ! -e "hook was ignored" message +' + +test_expect_success 'no warning if unset advice.ignoredHook and hook removed' ' + rm -f "$hook" && + test_unconfig advice.ignoredHook && + git commit --allow-empty -m "even more" 2>message && + test_i18ngrep ! -e "hook was ignored" message +' + +test_done diff --git a/t/t7521-ignored-mode.sh b/t/t7521-ignored-mode.sh new file mode 100755 index 0000000000..91790943c3 --- /dev/null +++ b/t/t7521-ignored-mode.sh @@ -0,0 +1,233 @@ +#!/bin/sh + +test_description='git status ignored modes' + +. ./test-lib.sh + +test_expect_success 'setup initial commit and ignore file' ' + cat >.gitignore <<-\EOF && + *.ign + ignored_dir/ + !*.unignore + EOF + git add . && + git commit -m "Initial commit" +' + +test_expect_success 'Verify behavior of status on directories with ignored files' ' + test_when_finished "git clean -fdx" && + cat >expect <<-\EOF && + ? expect + ? output + ! dir/ignored/ignored_1.ign + ! dir/ignored/ignored_2.ign + ! ignored/ignored_1.ign + ! ignored/ignored_2.ign + EOF + + mkdir -p ignored dir/ignored && + touch ignored/ignored_1.ign ignored/ignored_2.ign \ + dir/ignored/ignored_1.ign dir/ignored/ignored_2.ign && + + git status --porcelain=v2 --ignored=matching --untracked-files=all >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify status behavior on directory with tracked & ignored files' ' + test_when_finished "git clean -fdx && git reset HEAD~1 --hard" && + cat >expect <<-\EOF && + ? expect + ? output + ! dir/tracked_ignored/ignored_1.ign + ! dir/tracked_ignored/ignored_2.ign + ! tracked_ignored/ignored_1.ign + ! tracked_ignored/ignored_2.ign + EOF + + mkdir -p tracked_ignored dir/tracked_ignored && + touch tracked_ignored/tracked_1 tracked_ignored/tracked_2 \ + tracked_ignored/ignored_1.ign tracked_ignored/ignored_2.ign \ + dir/tracked_ignored/tracked_1 dir/tracked_ignored/tracked_2 \ + dir/tracked_ignored/ignored_1.ign dir/tracked_ignored/ignored_2.ign && + + git add tracked_ignored/tracked_1 tracked_ignored/tracked_2 \ + dir/tracked_ignored/tracked_1 dir/tracked_ignored/tracked_2 && + git commit -m "commit tracked files" && + + git status --porcelain=v2 --ignored=matching --untracked-files=all >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify status behavior on directory with untracked and ignored files' ' + test_when_finished "git clean -fdx" && + cat >expect <<-\EOF && + ? dir/untracked_ignored/untracked_1 + ? dir/untracked_ignored/untracked_2 + ? expect + ? output + ? untracked_ignored/untracked_1 + ? untracked_ignored/untracked_2 + ! dir/untracked_ignored/ignored_1.ign + ! dir/untracked_ignored/ignored_2.ign + ! untracked_ignored/ignored_1.ign + ! untracked_ignored/ignored_2.ign + EOF + + mkdir -p untracked_ignored dir/untracked_ignored && + touch untracked_ignored/untracked_1 untracked_ignored/untracked_2 \ + untracked_ignored/ignored_1.ign untracked_ignored/ignored_2.ign \ + dir/untracked_ignored/untracked_1 dir/untracked_ignored/untracked_2 \ + dir/untracked_ignored/ignored_1.ign dir/untracked_ignored/ignored_2.ign && + + git status --porcelain=v2 --ignored=matching --untracked-files=all >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify status matching ignored files on ignored directory' ' + test_when_finished "git clean -fdx" && + cat >expect <<-\EOF && + ? expect + ? output + ! ignored_dir/ + EOF + + mkdir ignored_dir && + touch ignored_dir/ignored_1 ignored_dir/ignored_2 \ + ignored_dir/ignored_1.ign ignored_dir/ignored_2.ign && + + git status --porcelain=v2 --ignored=matching --untracked-files=all >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify status behavior on ignored directory containing tracked file' ' + test_when_finished "git clean -fdx && git reset HEAD~1 --hard" && + cat >expect <<-\EOF && + ? expect + ? output + ! ignored_dir/ignored_1 + ! ignored_dir/ignored_1.ign + ! ignored_dir/ignored_2 + ! ignored_dir/ignored_2.ign + EOF + + mkdir ignored_dir && + touch ignored_dir/ignored_1 ignored_dir/ignored_2 \ + ignored_dir/ignored_1.ign ignored_dir/ignored_2.ign \ + ignored_dir/tracked && + git add -f ignored_dir/tracked && + git commit -m "Force add file in ignored directory" && + git status --porcelain=v2 --ignored=matching --untracked-files=all >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify matching ignored files with --untracked-files=normal' ' + test_when_finished "git clean -fdx" && + cat >expect <<-\EOF && + ? expect + ? output + ? untracked_dir/ + ! ignored_dir/ + ! ignored_files/ignored_1.ign + ! ignored_files/ignored_2.ign + EOF + + mkdir ignored_dir ignored_files untracked_dir && + touch ignored_dir/ignored_1 ignored_dir/ignored_2 \ + ignored_files/ignored_1.ign ignored_files/ignored_2.ign \ + untracked_dir/untracked && + git status --porcelain=v2 --ignored=matching --untracked-files=normal >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify matching ignored files with --untracked-files=normal' ' + test_when_finished "git clean -fdx" && + cat >expect <<-\EOF && + ? expect + ? output + ? untracked_dir/ + ! ignored_dir/ + ! ignored_files/ignored_1.ign + ! ignored_files/ignored_2.ign + EOF + + mkdir ignored_dir ignored_files untracked_dir && + touch ignored_dir/ignored_1 ignored_dir/ignored_2 \ + ignored_files/ignored_1.ign ignored_files/ignored_2.ign \ + untracked_dir/untracked && + git status --porcelain=v2 --ignored=matching --untracked-files=normal >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify status behavior on ignored directory containing tracked file' ' + test_when_finished "git clean -fdx && git reset HEAD~1 --hard" && + cat >expect <<-\EOF && + ? expect + ? output + ! ignored_dir/ignored_1 + ! ignored_dir/ignored_1.ign + ! ignored_dir/ignored_2 + ! ignored_dir/ignored_2.ign + EOF + + mkdir ignored_dir && + touch ignored_dir/ignored_1 ignored_dir/ignored_2 \ + ignored_dir/ignored_1.ign ignored_dir/ignored_2.ign \ + ignored_dir/tracked && + git add -f ignored_dir/tracked && + git commit -m "Force add file in ignored directory" && + git status --porcelain=v2 --ignored=matching --untracked-files=normal >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify behavior of status with --ignored=no' ' + test_when_finished "git clean -fdx" && + cat >expect <<-\EOF && + ? expect + ? output + EOF + + mkdir -p ignored dir/ignored && + touch ignored/ignored_1.ign ignored/ignored_2.ign \ + dir/ignored/ignored_1.ign dir/ignored/ignored_2.ign && + + git status --porcelain=v2 --ignored=no --untracked-files=all >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify behavior of status with --ignored=traditional and --untracked-files=all' ' + test_when_finished "git clean -fdx" && + cat >expect <<-\EOF && + ? expect + ? output + ! dir/ignored/ignored_1.ign + ! dir/ignored/ignored_2.ign + ! ignored/ignored_1.ign + ! ignored/ignored_2.ign + EOF + + mkdir -p ignored dir/ignored && + touch ignored/ignored_1.ign ignored/ignored_2.ign \ + dir/ignored/ignored_1.ign dir/ignored/ignored_2.ign && + + git status --porcelain=v2 --ignored=traditional --untracked-files=all >output && + test_i18ncmp expect output +' + +test_expect_success 'Verify behavior of status with --ignored=traditional and --untracked-files=normal' ' + test_when_finished "git clean -fdx" && + cat >expect <<-\EOF && + ? expect + ? output + ! dir/ + ! ignored/ + EOF + + mkdir -p ignored dir/ignored && + touch ignored/ignored_1.ign ignored/ignored_2.ign \ + dir/ignored/ignored_1.ign dir/ignored/ignored_2.ign && + + git status --porcelain=v2 --ignored=traditional --untracked-files=normal >output && + test_i18ncmp expect output +' + +test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index 80194b79f9..6736d8d131 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -697,7 +697,43 @@ test_expect_success 'merge --no-ff --edit' ' git cat-file commit HEAD >raw && grep "work done on the side branch" raw && sed "1,/^$/d" >actual raw && - test_cmp actual expected + test_cmp expected actual +' + +test_expect_success 'merge annotated/signed tag w/o tracking' ' + test_when_finished "rm -rf dst; git tag -d anno1" && + git tag -a -m "anno c1" anno1 c1 && + git init dst && + git rev-parse c1 >dst/expect && + ( + # c0 fast-forwards to c1 but because this repository + # is not a "downstream" whose refs/tags follows along + # tag from the "upstream", this pull defaults to --no-ff + cd dst && + git pull .. c0 && + git pull .. anno1 && + git rev-parse HEAD^2 >actual && + test_cmp expect actual + ) +' + +test_expect_success 'merge annotated/signed tag w/ tracking' ' + test_when_finished "rm -rf dst; git tag -d anno1" && + git tag -a -m "anno c1" anno1 c1 && + git init dst && + git rev-parse c1 >dst/expect && + ( + # c0 fast-forwards to c1 and because this repository + # is a "downstream" whose refs/tags follows along + # tag from the "upstream", this pull defaults to --ff + cd dst && + git remote add origin .. && + git pull origin c0 && + git fetch origin && + git merge anno1 && + git rev-parse HEAD >actual && + test_cmp expect actual + ) ' test_expect_success GPG 'merge --ff-only tag' ' @@ -709,7 +745,7 @@ test_expect_success GPG 'merge --ff-only tag' ' git merge --ff-only signed && git rev-parse signed^0 >expect && git rev-parse HEAD >actual && - test_cmp actual expect + test_cmp expect actual ' test_expect_success GPG 'merge --no-edit tag should skip editor' ' @@ -718,10 +754,10 @@ test_expect_success GPG 'merge --no-edit tag should skip editor' ' git tag -f -s -m "A newer commit" signed && git reset --hard c0 && - EDITOR=false git merge --no-edit signed && + EDITOR=false git merge --no-edit --no-ff signed && git rev-parse signed^0 >expect && git rev-parse HEAD^2 >actual && - test_cmp actual expect + test_cmp expect actual ' test_expect_success 'set up mod-256 conflict scenario' ' diff --git a/t/t7607-merge-overwrite.sh b/t/t7607-merge-overwrite.sh index 9444d6a9b9..dd8ab7ede1 100755 --- a/t/t7607-merge-overwrite.sh +++ b/t/t7607-merge-overwrite.sh @@ -92,12 +92,15 @@ test_expect_success 'will not overwrite removed file with staged changes' ' test_cmp important c1.c ' -test_expect_failure 'will not overwrite unstaged changes in renamed file' ' +test_expect_success 'will not overwrite unstaged changes in renamed file' ' git reset --hard c1 && git mv c1.c other.c && git commit -m rename && cp important other.c && - git merge c1a && + test_must_fail git merge c1a >out && + test_i18ngrep "Refusing to lose dirty file at other.c" out && + test_path_is_file other.c~HEAD && + test $(git hash-object other.c~HEAD) = $(git rev-parse c1a:c1.c) && test_cmp important other.c ' diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh index 381b7df452..1a430b9c40 100755 --- a/t/t7610-mergetool.sh +++ b/t/t7610-mergetool.sh @@ -621,7 +621,7 @@ test_expect_success 'file with no base' ' test_must_fail git merge master && git mergetool --no-prompt --tool mybase -- both && >expected && - test_cmp both expected + test_cmp expected both ' test_expect_success 'custom commands override built-ins' ' @@ -632,7 +632,7 @@ test_expect_success 'custom commands override built-ins' ' test_must_fail git merge master && git mergetool --no-prompt --tool defaults -- both && echo master both added >expected && - test_cmp both expected + test_cmp expected both ' test_expect_success 'filenames seen by tools start with ./' ' diff --git a/t/t7612-merge-verify-signatures.sh b/t/t7612-merge-verify-signatures.sh index 8ae69a61c3..e797c74112 100755 --- a/t/t7612-merge-verify-signatures.sh +++ b/t/t7612-merge-verify-signatures.sh @@ -35,27 +35,72 @@ test_expect_success GPG 'create signed commits' ' ' test_expect_success GPG 'merge unsigned commit with verification' ' + test_when_finished "git reset --hard && git checkout initial" && test_must_fail git merge --ff-only --verify-signatures side-unsigned 2>mergeerror && test_i18ngrep "does not have a GPG signature" mergeerror ' +test_expect_success GPG 'merge unsigned commit with merge.verifySignatures=true' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config merge.verifySignatures true && + test_must_fail git merge --ff-only side-unsigned 2>mergeerror && + test_i18ngrep "does not have a GPG signature" mergeerror +' + test_expect_success GPG 'merge commit with bad signature with verification' ' + test_when_finished "git reset --hard && git checkout initial" && test_must_fail git merge --ff-only --verify-signatures $(cat forged.commit) 2>mergeerror && test_i18ngrep "has a bad GPG signature" mergeerror ' +test_expect_success GPG 'merge commit with bad signature with merge.verifySignatures=true' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config merge.verifySignatures true && + test_must_fail git merge --ff-only $(cat forged.commit) 2>mergeerror && + test_i18ngrep "has a bad GPG signature" mergeerror +' + test_expect_success GPG 'merge commit with untrusted signature with verification' ' + test_when_finished "git reset --hard && git checkout initial" && test_must_fail git merge --ff-only --verify-signatures side-untrusted 2>mergeerror && test_i18ngrep "has an untrusted GPG signature" mergeerror ' +test_expect_success GPG 'merge commit with untrusted signature with merge.verifySignatures=true' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config merge.verifySignatures true && + test_must_fail git merge --ff-only side-untrusted 2>mergeerror && + test_i18ngrep "has an untrusted GPG signature" mergeerror +' + test_expect_success GPG 'merge signed commit with verification' ' + test_when_finished "git reset --hard && git checkout initial" && git merge --verbose --ff-only --verify-signatures side-signed >mergeoutput && test_i18ngrep "has a good GPG signature" mergeoutput ' +test_expect_success GPG 'merge signed commit with merge.verifySignatures=true' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config merge.verifySignatures true && + git merge --verbose --ff-only side-signed >mergeoutput && + test_i18ngrep "has a good GPG signature" mergeoutput +' + test_expect_success GPG 'merge commit with bad signature without verification' ' + test_when_finished "git reset --hard && git checkout initial" && + git merge $(cat forged.commit) +' + +test_expect_success GPG 'merge commit with bad signature with merge.verifySignatures=false' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config merge.verifySignatures false && git merge $(cat forged.commit) ' +test_expect_success GPG 'merge commit with bad signature with merge.verifySignatures=true and --no-verify-signatures' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config merge.verifySignatures true && + git merge --no-verify-signatures $(cat forged.commit) +' + test_done diff --git a/t/t7614-merge-signoff.sh b/t/t7614-merge-signoff.sh new file mode 100755 index 0000000000..c1b8446f49 --- /dev/null +++ b/t/t7614-merge-signoff.sh @@ -0,0 +1,69 @@ +#!/bin/sh + +test_description='git merge --signoff + +This test runs git merge --signoff and makes sure that it works. +' + +. ./test-lib.sh + +# Setup test files +test_setup() { + # Expected commit message after merge --signoff + cat >expected-signed <<EOF && +Merge branch 'master' into other-branch + +Signed-off-by: $(git var GIT_COMMITTER_IDENT | sed -e "s/>.*/>/") +EOF + + # Expected commit message after merge without --signoff (or with --no-signoff) + cat >expected-unsigned <<EOF && +Merge branch 'master' into other-branch +EOF + + # Initial commit and feature branch to merge master into it. + git commit --allow-empty -m "Initial empty commit" && + git checkout -b other-branch && + test_commit other-branch file1 1 +} + +# Setup repository, files & feature branch +# This step must be run if You want to test 2,3 or 4 +# Order of 2,3,4 is not important, but 1 must be run before +# For example `-r 1,4` or `-r 1,4,2 -v` etc +# But not `-r 2` or `-r 4,3,2,1` +test_expect_success 'setup' ' + test_setup +' + +# Test with --signoff flag +test_expect_success 'git merge --signoff adds a sign-off line' ' + git checkout master && + test_commit master-branch-2 file2 2 && + git checkout other-branch && + git merge master --signoff --no-edit && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +# Test without --signoff flag +test_expect_success 'git merge does not add a sign-off line' ' + git checkout master && + test_commit master-branch-3 file3 3 && + git checkout other-branch && + git merge master --no-edit && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-unsigned actual +' + +# Test for --no-signoff flag +test_expect_success 'git merge --no-signoff flag cancels --signoff flag' ' + git checkout master && + test_commit master-branch-4 file4 4 && + git checkout other-branch && + git merge master --no-edit --signoff --no-signoff && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-unsigned actual +' + +test_done diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 6061a04147..6162e2a8e6 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -4,6 +4,12 @@ test_description='git repack works correctly' . ./test-lib.sh +commit_and_pack() { + test_commit "$@" >/dev/null && + SHA1=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) && + echo pack-${SHA1}.pack +} + test_expect_success 'objects in packs marked .keep are not repacked' ' echo content1 > file1 && echo content2 > file2 && @@ -194,7 +200,26 @@ test_expect_success 'objects made unreachable by grafts only are kept' ' git reflog expire --expire=$test_tick --expire-unreachable=$test_tick --all && git repack -a -d && git cat-file -t $H1 - ' +' + +test_expect_success 'repack --keep-pack' ' + test_create_repo keep-pack && + ( + cd keep-pack && + P1=$(commit_and_pack 1) && + P2=$(commit_and_pack 2) && + P3=$(commit_and_pack 3) && + P4=$(commit_and_pack 4) && + ls .git/objects/pack/*.pack >old-counts && + test_line_count = 4 old-counts && + git repack -a -d --keep-pack $P1 --keep-pack $P4 && + ls .git/objects/pack/*.pack >new-counts && + grep -q $P1 new-counts && + grep -q $P4 new-counts && + test_line_count = 3 new-counts && + git fsck + ) +' test_done diff --git a/t/t7701-repack-unpack-unreachable.sh b/t/t7701-repack-unpack-unreachable.sh index 987573c41f..48261ba080 100755 --- a/t/t7701-repack-unpack-unreachable.sh +++ b/t/t7701-repack-unpack-unreachable.sh @@ -55,8 +55,8 @@ test_expect_success '-A with -d option leaves unreachable objects unpacked' ' compare_mtimes () { - read tref rest && - while read t rest; do + read tref && + while read t; do test "$tref" = "$t" || return 1 done } @@ -90,7 +90,7 @@ test_expect_success 'unpacked objects receive timestamp of pack file' ' tmppack=".git/objects/pack/tmp_pack" && ln "$packfile" "$tmppack" && git repack -A -l -d && - test-chmtime -v +0 "$tmppack" "$fsha1path" "$csha1path" "$tsha1path" \ + test-tool chmtime --get "$tmppack" "$fsha1path" "$csha1path" "$tsha1path" \ > mtimes && compare_mtimes < mtimes ' @@ -103,7 +103,7 @@ test_expect_success 'do not bother loosening old objects' ' git prune-packed && git cat-file -p $obj1 && git cat-file -p $obj2 && - test-chmtime =-86400 .git/objects/pack/pack-$pack2.pack && + test-tool chmtime =-86400 .git/objects/pack/pack-$pack2.pack && git repack -A -d --unpack-unreachable=1.hour.ago && git cat-file -p $obj1 && test_must_fail git cat-file -p $obj2 @@ -117,7 +117,7 @@ test_expect_success 'keep packed objects found only in index' ' git reset HEAD^ && git reflog expire --expire=now --all && git add file && - test-chmtime =-86400 .git/objects/pack/* && + test-tool chmtime =-86400 .git/objects/pack/* && git gc --prune=1.hour.ago && git cat-file blob :file ' diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 2a6679c2f5..1797f632a3 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -60,6 +60,18 @@ test_expect_success setup ' echo " line with leading space3" echo "line without leading space2" } >space && + cat >hello.ps1 <<-\EOF && + # No-op. + function dummy() {} + + # Say hello. + function hello() { + echo "Hello world." + } # hello + + # Still a no-op. + function dummy() {} + EOF git add . && test_tick && git commit -m initial @@ -766,18 +778,27 @@ test_expect_success 'grep -W shows no trailing empty lines' ' test_cmp expected actual ' -cat >expected <<EOF -hello.c= printf("Hello world.\n"); -hello.c: return 0; -hello.c- /* char ?? */ -EOF - test_expect_success 'grep -W with userdiff' ' test_when_finished "rm -f .gitattributes" && - git config diff.custom.xfuncname "(printf.*|})$" && - echo "hello.c diff=custom" >.gitattributes && - git grep -W return >actual && - test_cmp expected actual + git config diff.custom.xfuncname "^function .*$" && + echo "hello.ps1 diff=custom" >.gitattributes && + git grep -W echo >function-context-userdiff-actual +' + +test_expect_success ' includes preceding comment' ' + grep "# Say hello" function-context-userdiff-actual +' + +test_expect_success ' includes function line' ' + grep "=function hello" function-context-userdiff-actual +' + +test_expect_success ' includes matching line' ' + grep ": echo" function-context-userdiff-actual +' + +test_expect_success ' includes last line of the function' ' + grep "} # hello" function-context-userdiff-actual ' for threads in $(test_seq 0 10) @@ -1110,6 +1131,12 @@ test_expect_success PCRE 'grep -P pattern' ' test_cmp expected actual ' +test_expect_success LIBPCRE2 "grep -P with (*NO_JIT) doesn't error out" ' + git grep -P "(*NO_JIT)\p{Ps}.*?\p{Pe}" hello.c >actual && + test_cmp expected actual + +' + test_expect_success !PCRE 'grep -P pattern errors without PCRE' ' test_must_fail git grep -P "foo.*bar" ' diff --git a/t/t7812-grep-icase-non-ascii.sh b/t/t7812-grep-icase-non-ascii.sh index 0059a1f837..0c685d3598 100755 --- a/t/t7812-grep-icase-non-ascii.sh +++ b/t/t7812-grep-icase-non-ascii.sh @@ -12,7 +12,7 @@ test_expect_success GETTEXT_LOCALE 'setup' ' ' test_have_prereq GETTEXT_LOCALE && -test-regex "HALLÓ" "Halló" ICASE && +test-tool regex "HALLÓ" "Halló" ICASE && test_set_prereq REGEX_LOCALE test_expect_success REGEX_LOCALE 'grep literal string, no -F' ' diff --git a/t/t9000-addresses.sh b/t/t9000-addresses.sh deleted file mode 100755 index a1ebef6de2..0000000000 --- a/t/t9000-addresses.sh +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -test_description='compare address parsing with and without Mail::Address' -. ./test-lib.sh - -if ! test_have_prereq PERL; then - skip_all='skipping perl interface tests, perl not available' - test_done -fi - -perl -MTest::More -e 0 2>/dev/null || { - skip_all="Perl Test::More unavailable, skipping test" - test_done -} - -perl -MMail::Address -e 0 2>/dev/null || { - skip_all="Perl Mail::Address unavailable, skipping test" - test_done -} - -test_external_has_tap=1 - -test_external_without_stderr \ - 'Perl address parsing function' \ - perl "$TEST_DIRECTORY"/t9000/test.pl - -test_done diff --git a/t/t9000/test.pl b/t/t9000/test.pl deleted file mode 100755 index dfeaa9c655..0000000000 --- a/t/t9000/test.pl +++ /dev/null @@ -1,67 +0,0 @@ -#!/usr/bin/perl -use lib (split(/:/, $ENV{GITPERLLIB})); - -use 5.008; -use warnings; -use strict; - -use Test::More qw(no_plan); -use Mail::Address; - -BEGIN { use_ok('Git') } - -my @success_list = (q[Jane], - q[jdoe@example.com], - q[<jdoe@example.com>], - q[Jane <jdoe@example.com>], - q[Jane Doe <jdoe@example.com>], - q["Jane" <jdoe@example.com>], - q["Doe, Jane" <jdoe@example.com>], - q["Jane@:;\>.,()<Doe" <jdoe@example.com>], - q[Jane!#$%&'*+-/=?^_{|}~Doe' <jdoe@example.com>], - q["<jdoe@example.com>"], - q["Jane jdoe@example.com"], - q[Jane Doe <jdoe @ example.com >], - q[Jane Doe < jdoe@example.com >], - q[Jane @ Doe @ Jane @ Doe], - q["Jane, 'Doe'" <jdoe@example.com>], - q['Doe, "Jane' <jdoe@example.com>], - q["Jane" "Do"e <jdoe@example.com>], - q["Jane' Doe" <jdoe@example.com>], - q["Jane Doe <jdoe@example.com>" <jdoe@example.com>], - q["Jane\" Doe" <jdoe@example.com>], - q[Doe, jane <jdoe@example.com>], - q["Jane Doe <jdoe@example.com>], - q['Jane 'Doe' <jdoe@example.com>], - q[Jane@:;\.,()<>Doe <jdoe@example.com>], - q[Jane <jdoe@example.com> Doe], - q[<jdoe@example.com> Jane Doe]); - -my @known_failure_list = (q[Jane\ Doe <jdoe@example.com>], - q["Doe, Ja"ne <jdoe@example.com>], - q["Doe, Katarina" Jane <jdoe@example.com>], - q[Jane jdoe@example.com], - q["Jane "Kat"a" ri"na" ",Doe" <jdoe@example.com>], - q[Jane Doe], - q[Jane "Doe <jdoe@example.com>"], - q[\"Jane Doe <jdoe@example.com>], - q[Jane\"\" Doe <jdoe@example.com>], - q['Jane "Katarina\" \' Doe' <jdoe@example.com>]); - -foreach my $str (@success_list) { - my @expected = map { $_->format } Mail::Address->parse("$str"); - my @actual = Git::parse_mailboxes("$str"); - is_deeply(\@expected, \@actual, qq[same output : $str]); -} - -TODO: { - local $TODO = "known breakage"; - foreach my $str (@known_failure_list) { - my @expected = map { $_->format } Mail::Address->parse("$str"); - my @actual = Git::parse_mailboxes("$str"); - is_deeply(\@expected, \@actual, qq[same output : $str]); - } -} - -my $is_passing = eval { Test::More->is_passing }; -exit($is_passing ? 0 : 1) unless $@ =~ /Can't locate object method/; diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index f30980895c..e80eacbb1b 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -6,6 +6,12 @@ test_description='git send-email' # May be altered later in the test PREREQ="PERL" +replace_variable_fields () { + sed -e "s/^\(Date:\).*/\1 DATE-STRING/" \ + -e "s/^\(Message-Id:\).*/\1 MESSAGE-ID-STRING/" \ + -e "s/^\(X-Mailer:\).*/\1 X-MAILER-STRING/" +} + test_expect_success $PREREQ 'prepare reference tree' ' echo "1A quick brown fox jumps over the" >file && echo "lazy dog" >>file && @@ -172,6 +178,25 @@ test_expect_success $PREREQ 'cc trailer with various syntax' ' test_cmp expected-cc commandline1 ' +test_expect_success $PREREQ 'setup fake get_maintainer.pl script for cc trailer' " + write_script expected-cc-script.sh <<-EOF + echo 'One Person <one@example.com> (supporter:THIS (FOO/bar))' + echo 'Two Person <two@example.com> (maintainer:THIS THING)' + echo 'Third List <three@example.com> (moderated list:THIS THING (FOO/bar))' + echo '<four@example.com> (moderated list:FOR THING)' + echo 'five@example.com (open list:FOR THING (FOO/bar))' + echo 'six@example.com (open list)' + EOF +" + +test_expect_success $PREREQ 'cc trailer with get_maintainer.pl output' ' + clean_fake_sendmail && + git send-email -1 --to=recipient@example.com \ + --cc-cmd=./expected-cc-script.sh \ + --smtp-server="$(pwd)/fake.sendmail" && + test_cmp expected-cc commandline1 +' + test_expect_success $PREREQ 'setup expect' " cat >expected-show-all-headers <<\EOF 0001-Second.patch @@ -199,6 +224,7 @@ Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING In-Reply-To: <unique-message-id@example.com> References: <unique-message-id@example.com> +Reply-To: Reply <reply@example.com> Result: OK EOF @@ -291,15 +317,13 @@ test_expect_success $PREREQ 'Show all headers' ' --dry-run \ --suppress-cc=sob \ --from="Example <from@example.com>" \ + --reply-to="Reply <reply@example.com>" \ --to=to@example.com \ --cc=cc@example.com \ --bcc=bcc@example.com \ --in-reply-to="<unique-message-id@example.com>" \ --smtp-server relay.example.com \ - $patches | - sed -e "s/^\(Date:\).*/\1 DATE-STRING/" \ - -e "s/^\(Message-Id:\).*/\1 MESSAGE-ID-STRING/" \ - -e "s/^\(X-Mailer:\).*/\1 X-MAILER-STRING/" \ + $patches | replace_variable_fields \ >actual-show-all-headers && test_cmp expected-show-all-headers actual-show-all-headers ' @@ -554,12 +578,6 @@ Result: OK EOF " -replace_variable_fields () { - sed -e "s/^\(Date:\).*/\1 DATE-STRING/" \ - -e "s/^\(Message-Id:\).*/\1 MESSAGE-ID-STRING/" \ - -e "s/^\(X-Mailer:\).*/\1 X-MAILER-STRING/" -} - test_suppression () { git send-email \ --dry-run \ @@ -1266,7 +1284,7 @@ test_expect_success $PREREQ 'asks about and fixes 8bit encodings' ' grep email-using-8bit stdout && grep "Which 8bit encoding" stdout && egrep "Content|MIME" msgtxt1 >actual && - test_cmp actual content-type-decl + test_cmp content-type-decl actual ' test_expect_success $PREREQ 'sendemail.8bitEncoding works' ' @@ -1277,7 +1295,7 @@ test_expect_success $PREREQ 'sendemail.8bitEncoding works' ' --smtp-server="$(pwd)/fake.sendmail" \ email-using-8bit >stdout && egrep "Content|MIME" msgtxt1 >actual && - test_cmp actual content-type-decl + test_cmp content-type-decl actual ' test_expect_success $PREREQ '--8bit-encoding overrides sendemail.8bitEncoding' ' @@ -1289,7 +1307,7 @@ test_expect_success $PREREQ '--8bit-encoding overrides sendemail.8bitEncoding' ' --8bit-encoding=UTF-8 \ email-using-8bit >stdout && egrep "Content|MIME" msgtxt1 >actual && - test_cmp actual content-type-decl + test_cmp content-type-decl actual ' test_expect_success $PREREQ 'setup expect' ' diff --git a/t/t9004-example.sh b/t/t9004-example.sh new file mode 100755 index 0000000000..7e8894a4a7 --- /dev/null +++ b/t/t9004-example.sh @@ -0,0 +1,10 @@ +#!/bin/sh + +test_description='check that example code compiles and runs' +. ./test-lib.sh + +test_expect_success 'decorate' ' + test-tool example-decorate +' + +test_done diff --git a/t/t9010-svn-fe.sh b/t/t9010-svn-fe.sh index 6dafe7e99a..8eaaca6f99 100755 --- a/t/t9010-svn-fe.sh +++ b/t/t9010-svn-fe.sh @@ -4,12 +4,13 @@ test_description='check svn dumpfile importer' . ./test-lib.sh +if test_have_prereq !PIPE +then + skip_all="svn dumpfile importer testing requires the PIPE prerequisite" + test_done +fi + reinit_git () { - if ! test_declared_prereq PIPE - then - echo >&4 "reinit_git: need to declare PIPE prerequisite" - return 127 - fi rm -fr .git && rm -f stream backflow && git init && @@ -54,19 +55,19 @@ text_no_props () { >empty -test_expect_success PIPE 'empty dump' ' +test_expect_success 'empty dump' ' reinit_git && echo "SVN-fs-dump-format-version: 2" >input && try_dump input ' -test_expect_success PIPE 'v4 dumps not supported' ' +test_expect_success 'v4 dumps not supported' ' reinit_git && echo "SVN-fs-dump-format-version: 4" >v4.dump && try_dump v4.dump must_fail ' -test_expect_failure PIPE 'empty revision' ' +test_expect_failure 'empty revision' ' reinit_git && printf "rev <nobody, nobody@local>: %s\n" "" "" >expect && cat >emptyrev.dump <<-\EOF && @@ -86,7 +87,7 @@ test_expect_failure PIPE 'empty revision' ' test_cmp expect actual ' -test_expect_success PIPE 'empty properties' ' +test_expect_success 'empty properties' ' reinit_git && printf "rev <nobody, nobody@local>: %s\n" "" "" >expect && cat >emptyprop.dump <<-\EOF && @@ -109,7 +110,7 @@ test_expect_success PIPE 'empty properties' ' test_cmp expect actual ' -test_expect_success PIPE 'author name and commit message' ' +test_expect_success 'author name and commit message' ' reinit_git && echo "<author@example.com, author@example.com@local>" >expect.author && cat >message <<-\EOF && @@ -143,7 +144,7 @@ test_expect_success PIPE 'author name and commit message' ' test_cmp expect.author actual.author ' -test_expect_success PIPE 'unsupported properties are ignored' ' +test_expect_success 'unsupported properties are ignored' ' reinit_git && echo author >expect && cat >extraprop.dump <<-\EOF && @@ -168,7 +169,7 @@ test_expect_success PIPE 'unsupported properties are ignored' ' test_cmp expect actual ' -test_expect_failure PIPE 'timestamp and empty file' ' +test_expect_failure 'timestamp and empty file' ' echo author@example.com >expect.author && echo 1999-01-01 >expect.date && echo file >expect.files && @@ -210,7 +211,7 @@ test_expect_failure PIPE 'timestamp and empty file' ' test_cmp empty file ' -test_expect_success PIPE 'directory with files' ' +test_expect_success 'directory with files' ' reinit_git && printf "%s\n" directory/file1 directory/file2 >expect.files && echo hi >hi && @@ -263,7 +264,7 @@ test_expect_success PIPE 'directory with files' ' test_cmp hi directory/file2 ' -test_expect_success PIPE 'branch name with backslash' ' +test_expect_success 'branch name with backslash' ' reinit_git && sort <<-\EOF >expect.branch-files && trunk/file1 @@ -362,7 +363,7 @@ test_expect_success PIPE 'branch name with backslash' ' test_cmp expect.branch-files actual.branch-files ' -test_expect_success PIPE 'node without action' ' +test_expect_success 'node without action' ' reinit_git && cat >inaction.dump <<-\EOF && SVN-fs-dump-format-version: 3 @@ -383,7 +384,7 @@ test_expect_success PIPE 'node without action' ' try_dump inaction.dump must_fail ' -test_expect_success PIPE 'action: add node without text' ' +test_expect_success 'action: add node without text' ' reinit_git && cat >textless.dump <<-\EOF && SVN-fs-dump-format-version: 3 @@ -405,7 +406,7 @@ test_expect_success PIPE 'action: add node without text' ' try_dump textless.dump must_fail ' -test_expect_failure PIPE 'change file mode but keep old content' ' +test_expect_failure 'change file mode but keep old content' ' reinit_git && cat >expect <<-\EOF && OBJID @@ -481,7 +482,7 @@ test_expect_failure PIPE 'change file mode but keep old content' ' test_cmp hello actual.target ' -test_expect_success PIPE 'NUL in property value' ' +test_expect_success 'NUL in property value' ' reinit_git && echo "commit message" >expect.message && { @@ -507,7 +508,7 @@ test_expect_success PIPE 'NUL in property value' ' test_cmp expect.message actual.message ' -test_expect_success PIPE 'NUL in log message, file content, and property name' ' +test_expect_success 'NUL in log message, file content, and property name' ' # Caveat: svnadmin 1.6.16 (r1073529) truncates at \0 in the # svn:specialQnotreally example. reinit_git && @@ -587,7 +588,7 @@ test_expect_success PIPE 'NUL in log message, file content, and property name' ' test_cmp expect.hello2 actual.hello2 ' -test_expect_success PIPE 'change file mode and reiterate content' ' +test_expect_success 'change file mode and reiterate content' ' reinit_git && cat >expect <<-\EOF && OBJID @@ -667,7 +668,7 @@ test_expect_success PIPE 'change file mode and reiterate content' ' test_cmp hello actual.target ' -test_expect_success PIPE 'deltas supported' ' +test_expect_success 'deltas supported' ' reinit_git && { # (old) h + (inline) ello + (old) \n @@ -731,7 +732,7 @@ test_expect_success PIPE 'deltas supported' ' try_dump delta.dump ' -test_expect_success PIPE 'property deltas supported' ' +test_expect_success 'property deltas supported' ' reinit_git && cat >expect <<-\EOF && OBJID @@ -796,7 +797,7 @@ test_expect_success PIPE 'property deltas supported' ' test_cmp expect actual ' -test_expect_success PIPE 'properties on /' ' +test_expect_success 'properties on /' ' reinit_git && cat <<-\EOF >expect && OBJID @@ -850,7 +851,7 @@ test_expect_success PIPE 'properties on /' ' test_cmp expect actual ' -test_expect_success PIPE 'deltas for typechange' ' +test_expect_success 'deltas for typechange' ' reinit_git && cat >expect <<-\EOF && OBJID @@ -935,7 +936,7 @@ test_expect_success PIPE 'deltas for typechange' ' test_cmp expect actual ' -test_expect_success PIPE 'deltas need not consume the whole preimage' ' +test_expect_success 'deltas need not consume the whole preimage' ' reinit_git && cat >expect <<-\EOF && OBJID @@ -1040,7 +1041,7 @@ test_expect_success PIPE 'deltas need not consume the whole preimage' ' test_cmp expect.3 actual.3 ' -test_expect_success PIPE 'no hang for delta trying to read past end of preimage' ' +test_expect_success 'no hang for delta trying to read past end of preimage' ' reinit_git && { # COPY 1 @@ -1087,7 +1088,7 @@ test_expect_success 'set up svn repo' ' fi ' -test_expect_success SVNREPO,PIPE 't9135/svn.dump' ' +test_expect_success SVNREPO 't9135/svn.dump' ' mkdir -p simple-git && ( cd simple-git && diff --git a/t/t9020-remote-svn.sh b/t/t9020-remote-svn.sh index 4d81ba1c2c..6fca08e5e3 100755 --- a/t/t9020-remote-svn.sh +++ b/t/t9020-remote-svn.sh @@ -25,8 +25,8 @@ init_git () { git init && #git remote add svnsim testsvn::sim:///$TEST_DIRECTORY/t9020/example.svnrdump # let's reuse an existing dump file!? - git remote add svnsim testsvn::sim://$TEST_DIRECTORY/t9154/svn.dump - git remote add svnfile testsvn::file://$TEST_DIRECTORY/t9154/svn.dump + git remote add svnsim "testsvn::sim://$TEST_DIRECTORY/t9154/svn.dump" + git remote add svnfile "testsvn::file://$TEST_DIRECTORY/t9154/svn.dump" } if test -e "$GIT_BUILD_DIR/git-remote-testsvn" diff --git a/t/t9100-git-svn-basic.sh b/t/t9100-git-svn-basic.sh index 8a8ba65a2a..c937330a5f 100755 --- a/t/t9100-git-svn-basic.sh +++ b/t/t9100-git-svn-basic.sh @@ -288,12 +288,12 @@ test_expect_success 'able to dcommit to a subdirectory' ' test_expect_success 'dcommit should not fail with a touched file' ' test_commit "commit-new-file-foo2" foo2 && - test-chmtime =-60 foo && + test-tool chmtime =-60 foo && git svn dcommit ' test_expect_success 'rebase should not fail with a touched file' ' - test-chmtime =-60 foo && + test-tool chmtime =-60 foo && git svn rebase ' diff --git a/t/t9104-git-svn-follow-parent.sh b/t/t9104-git-svn-follow-parent.sh index cd480edf16..a735fa3717 100755 --- a/t/t9104-git-svn-follow-parent.sh +++ b/t/t9104-git-svn-follow-parent.sh @@ -33,8 +33,8 @@ test_expect_success 'init and fetch a moved directory' ' git svn fetch -i thunk && test "$(git rev-parse --verify refs/remotes/thunk@2)" \ = "$(git rev-parse --verify refs/remotes/thunk~1)" && - test "$(git cat-file blob refs/remotes/thunk:readme |\ - sed -n -e "3p")" = goodbye && + git cat-file blob refs/remotes/thunk:readme >actual && + test "$(sed -n -e "3p" actual)" = goodbye && test -z "$(git config --get svn-remote.svn.fetch \ "^trunk:refs/remotes/thunk@2$")" ' @@ -48,8 +48,8 @@ test_expect_success 'init and fetch from one svn-remote' ' git svn fetch -i svn/thunk && test "$(git rev-parse --verify refs/remotes/svn/trunk)" \ = "$(git rev-parse --verify refs/remotes/svn/thunk~1)" && - test "$(git cat-file blob refs/remotes/svn/thunk:readme |\ - sed -n -e "3p")" = goodbye + git cat-file blob refs/remotes/svn/thunk:readme >actual && + test "$(sed -n -e "3p" actual)" = goodbye ' test_expect_success 'follow deleted parent' ' @@ -107,7 +107,8 @@ test_expect_success 'follow deleted directory' ' git svn init --minimize-url -i glob "$svnrepo"/glob && git svn fetch -i glob && test "$(git cat-file blob refs/remotes/glob:blob/bye)" = hi && - test "$(git ls-tree refs/remotes/glob | wc -l )" -eq 1 + git ls-tree refs/remotes/glob >actual && + test_line_count = 1 actual ' # ref: r9270 of the Subversion repository: (http://svn.collab.net/repos/svn) @@ -204,8 +205,9 @@ test_expect_success "follow-parent is atomic" ' test_expect_success "track multi-parent paths" ' svn_cmd cp -m "resurrect /glob" "$svnrepo"/r9270 "$svnrepo"/glob && git svn multi-fetch && - test $(git cat-file commit refs/remotes/glob | \ - grep "^parent " | wc -l) -eq 2 + git cat-file commit refs/remotes/glob >actual && + grep "^parent " actual >actual2 && + test_line_count = 2 actual2 ' test_expect_success "multi-fetch continues to work" " diff --git a/t/t9107-git-svn-migrate.sh b/t/t9107-git-svn-migrate.sh index 9f3ef8f2ef..ceaa5bad10 100755 --- a/t/t9107-git-svn-migrate.sh +++ b/t/t9107-git-svn-migrate.sh @@ -28,7 +28,7 @@ test_expect_success 'git-svn-HEAD is a real HEAD' ' git rev-parse --verify refs/heads/git-svn-HEAD^0 ' -svnrepo_escaped=$(echo $svnrepo | sed 's/ /%20/') +svnrepo_escaped=$(echo $svnrepo | sed 's/ /%20/g') test_expect_success 'initialize old-style (v0) git svn layout' ' mkdir -p "$GIT_DIR"/git-svn/info "$GIT_DIR"/svn/info && diff --git a/t/t9108-git-svn-glob.sh b/t/t9108-git-svn-glob.sh index a94286c8ec..6990f64364 100755 --- a/t/t9108-git-svn-glob.sh +++ b/t/t9108-git-svn-glob.sh @@ -47,8 +47,8 @@ test_expect_success 'test refspec globbing' ' git config --add svn-remote.svn.tags\ "tags/*/src/a:refs/remotes/tags/*" && git svn multi-fetch && - git log --pretty=oneline refs/remotes/tags/end | \ - sed -e "s/^.\{41\}//" > output.end && + git log --pretty=oneline refs/remotes/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.end && test_cmp expect.end output.end && test "$(git rev-parse refs/remotes/tags/end~1)" = \ "$(git rev-parse refs/remotes/branches/start)" && @@ -75,14 +75,16 @@ test_expect_success 'test left-hand-side only globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test $(git rev-list refs/remotes/two/tags/end | wc -l) -eq 6 && - test $(git rev-list refs/remotes/two/branches/start | wc -l) -eq 3 && + git rev-list refs/remotes/two/tags/end >actual && + test_line_count = 6 actual && + git rev-list refs/remotes/two/branches/start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/two/branches/start~2) = \ $(git rev-parse refs/remotes/two/trunk) && test $(git rev-parse refs/remotes/two/tags/end~3) = \ $(git rev-parse refs/remotes/two/branches/start) && - git log --pretty=oneline refs/remotes/two/tags/end | \ - sed -e "s/^.\{41\}//" > output.two && + git log --pretty=oneline refs/remotes/two/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.two && test_cmp expect.two output.two ' diff --git a/t/t9109-git-svn-multi-glob.sh b/t/t9109-git-svn-multi-glob.sh index 8d99e848d4..c1e7542a37 100755 --- a/t/t9109-git-svn-multi-glob.sh +++ b/t/t9109-git-svn-multi-glob.sh @@ -47,8 +47,8 @@ test_expect_success 'test refspec globbing' ' git config --add svn-remote.svn.tags\ "tags/*/src/a:refs/remotes/tags/*" && git svn multi-fetch && - git log --pretty=oneline refs/remotes/tags/end | \ - sed -e "s/^.\{41\}//" > output.end && + git log --pretty=oneline refs/remotes/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.end && test_cmp expect.end output.end && test "$(git rev-parse refs/remotes/tags/end~1)" = \ "$(git rev-parse refs/remotes/branches/v1/start)" && @@ -75,14 +75,16 @@ test_expect_success 'test left-hand-side only globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test $(git rev-list refs/remotes/two/tags/end | wc -l) -eq 6 && - test $(git rev-list refs/remotes/two/branches/v1/start | wc -l) -eq 3 && + git rev-list refs/remotes/two/tags/end >actual && + test_line_count = 6 actual && + git rev-list refs/remotes/two/branches/v1/start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/two/branches/v1/start~2) = \ $(git rev-parse refs/remotes/two/trunk) && test $(git rev-parse refs/remotes/two/tags/end~3) = \ $(git rev-parse refs/remotes/two/branches/v1/start) && - git log --pretty=oneline refs/remotes/two/tags/end | \ - sed -e "s/^.\{41\}//" > output.two && + git log --pretty=oneline refs/remotes/two/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.two && test_cmp expect.two output.two ' cat > expect.four <<EOF @@ -124,14 +126,16 @@ test_expect_success 'test another branch' ' git config --add svn-remote.four.tags \ "tags/*:refs/remotes/four/tags/*" && git svn fetch four && - test $(git rev-list refs/remotes/four/tags/next | wc -l) -eq 5 && - test $(git rev-list refs/remotes/four/branches/v2/start | wc -l) -eq 3 && + git rev-list refs/remotes/four/tags/next >actual && + test_line_count = 5 actual && + git rev-list refs/remotes/four/branches/v2/start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/four/branches/v2/start~2) = \ $(git rev-parse refs/remotes/four/trunk) && test $(git rev-parse refs/remotes/four/tags/next~2) = \ $(git rev-parse refs/remotes/four/branches/v2/start) && - git log --pretty=oneline refs/remotes/four/tags/next | \ - sed -e "s/^.\{41\}//" > output.four && + git log --pretty=oneline refs/remotes/four/tags/next >actual && + sed -e "s/^.\{41\}//" actual >output.four && test_cmp expect.four output.four ' diff --git a/t/t9110-git-svn-use-svm-props.sh b/t/t9110-git-svn-use-svm-props.sh index dde0a3c222..ad37d980c9 100755 --- a/t/t9110-git-svn-use-svm-props.sh +++ b/t/t9110-git-svn-use-svm-props.sh @@ -21,37 +21,37 @@ uuid=161ce429-a9dd-4828-af4a-52023f968c89 bar_url=http://mayonaise/svnrepo/bar test_expect_success 'verify metadata for /bar' " - git cat-file commit refs/remotes/bar | \ - grep '^git-svn-id: $bar_url@12 $uuid$' && - git cat-file commit refs/remotes/bar~1 | \ - grep '^git-svn-id: $bar_url@11 $uuid$' && - git cat-file commit refs/remotes/bar~2 | \ - grep '^git-svn-id: $bar_url@10 $uuid$' && - git cat-file commit refs/remotes/bar~3 | \ - grep '^git-svn-id: $bar_url@9 $uuid$' && - git cat-file commit refs/remotes/bar~4 | \ - grep '^git-svn-id: $bar_url@6 $uuid$' && - git cat-file commit refs/remotes/bar~5 | \ - grep '^git-svn-id: $bar_url@1 $uuid$' + git cat-file commit refs/remotes/bar >actual && + grep '^git-svn-id: $bar_url@12 $uuid$' actual && + git cat-file commit refs/remotes/bar~1 >actual && + grep '^git-svn-id: $bar_url@11 $uuid$' actual && + git cat-file commit refs/remotes/bar~2 >actual && + grep '^git-svn-id: $bar_url@10 $uuid$' actual && + git cat-file commit refs/remotes/bar~3 >actual && + grep '^git-svn-id: $bar_url@9 $uuid$' actual && + git cat-file commit refs/remotes/bar~4 >actual && + grep '^git-svn-id: $bar_url@6 $uuid$' actual && + git cat-file commit refs/remotes/bar~5 >actual && + grep '^git-svn-id: $bar_url@1 $uuid$' actual " e_url=http://mayonaise/svnrepo/dir/a/b/c/d/e test_expect_success 'verify metadata for /dir/a/b/c/d/e' " - git cat-file commit refs/remotes/e | \ - grep '^git-svn-id: $e_url@1 $uuid$' + git cat-file commit refs/remotes/e >actual && + grep '^git-svn-id: $e_url@1 $uuid$' actual " dir_url=http://mayonaise/svnrepo/dir test_expect_success 'verify metadata for /dir' " - git cat-file commit refs/remotes/dir | \ - grep '^git-svn-id: $dir_url@2 $uuid$' && - git cat-file commit refs/remotes/dir~1 | \ - grep '^git-svn-id: $dir_url@1 $uuid$' + git cat-file commit refs/remotes/dir >actual && + grep '^git-svn-id: $dir_url@2 $uuid$' actual && + git cat-file commit refs/remotes/dir~1 >actual && + grep '^git-svn-id: $dir_url@1 $uuid$' actual " test_expect_success 'find commit based on SVN revision number' " - git svn find-rev r12 | - grep $(git rev-parse HEAD) + git svn find-rev r12 >actual && + grep $(git rev-parse HEAD) actual " test_expect_success 'empty rebase' " diff --git a/t/t9111-git-svn-use-svnsync-props.sh b/t/t9111-git-svn-use-svnsync-props.sh index 22b6e5ee7d..6c93073551 100755 --- a/t/t9111-git-svn-use-svnsync-props.sh +++ b/t/t9111-git-svn-use-svnsync-props.sh @@ -20,32 +20,32 @@ uuid=161ce429-a9dd-4828-af4a-52023f968c89 bar_url=http://mayonaise/svnrepo/bar test_expect_success 'verify metadata for /bar' " - git cat-file commit refs/remotes/bar | \ - grep '^git-svn-id: $bar_url@12 $uuid$' && - git cat-file commit refs/remotes/bar~1 | \ - grep '^git-svn-id: $bar_url@11 $uuid$' && - git cat-file commit refs/remotes/bar~2 | \ - grep '^git-svn-id: $bar_url@10 $uuid$' && - git cat-file commit refs/remotes/bar~3 | \ - grep '^git-svn-id: $bar_url@9 $uuid$' && - git cat-file commit refs/remotes/bar~4 | \ - grep '^git-svn-id: $bar_url@6 $uuid$' && - git cat-file commit refs/remotes/bar~5 | \ - grep '^git-svn-id: $bar_url@1 $uuid$' + git cat-file commit refs/remotes/bar >actual && + grep '^git-svn-id: $bar_url@12 $uuid$' actual && + git cat-file commit refs/remotes/bar~1 >actual && + grep '^git-svn-id: $bar_url@11 $uuid$' actual && + git cat-file commit refs/remotes/bar~2 >actual && + grep '^git-svn-id: $bar_url@10 $uuid$' actual && + git cat-file commit refs/remotes/bar~3 >actual && + grep '^git-svn-id: $bar_url@9 $uuid$' actual && + git cat-file commit refs/remotes/bar~4 >actual && + grep '^git-svn-id: $bar_url@6 $uuid$' actual && + git cat-file commit refs/remotes/bar~5 >actual && + grep '^git-svn-id: $bar_url@1 $uuid$' actual " e_url=http://mayonaise/svnrepo/dir/a/b/c/d/e test_expect_success 'verify metadata for /dir/a/b/c/d/e' " - git cat-file commit refs/remotes/e | \ - grep '^git-svn-id: $e_url@1 $uuid$' + git cat-file commit refs/remotes/e >actual && + grep '^git-svn-id: $e_url@1 $uuid$' actual " dir_url=http://mayonaise/svnrepo/dir test_expect_success 'verify metadata for /dir' " - git cat-file commit refs/remotes/dir | \ - grep '^git-svn-id: $dir_url@2 $uuid$' && - git cat-file commit refs/remotes/dir~1 | \ - grep '^git-svn-id: $dir_url@1 $uuid$' + git cat-file commit refs/remotes/dir >actual && + grep '^git-svn-id: $dir_url@2 $uuid$' actual && + git cat-file commit refs/remotes/dir~1 >actual && + grep '^git-svn-id: $dir_url@1 $uuid$' actual " test_done diff --git a/t/t9114-git-svn-dcommit-merge.sh b/t/t9114-git-svn-dcommit-merge.sh index a3d388228a..32317d6bca 100755 --- a/t/t9114-git-svn-dcommit-merge.sh +++ b/t/t9114-git-svn-dcommit-merge.sh @@ -27,9 +27,7 @@ cat << EOF # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# along with this program; if not, see <http://www.gnu.org/licenses/>. # EOF } @@ -70,7 +68,8 @@ test_debug 'gitk --all & sleep 1' test_expect_success 'verify pre-merge ancestry' " test x\$(git rev-parse --verify refs/heads/svn^2) = \ x\$(git rev-parse --verify refs/heads/merge) && - git cat-file commit refs/heads/svn^ | grep '^friend$' + git cat-file commit refs/heads/svn^ >actual && + grep '^friend$' actual " test_expect_success 'git svn dcommit merges' " @@ -84,12 +83,13 @@ test_expect_success 'verify post-merge ancestry' " x\$(git rev-parse --verify refs/remotes/origin/trunk) && test x\$(git rev-parse --verify refs/heads/svn^2) = \ x\$(git rev-parse --verify refs/heads/merge) && - git cat-file commit refs/heads/svn^ | grep '^friend$' + git cat-file commit refs/heads/svn^ >actual && + grep '^friend$' actual " test_expect_success 'verify merge commit message' " - git rev-list --pretty=raw -1 refs/heads/svn | \ - grep \" Merge branch 'merge' into svn\" + git rev-list --pretty=raw -1 refs/heads/svn >actual && + grep \" Merge branch 'merge' into svn\" actual " test_done diff --git a/t/t9130-git-svn-authors-file.sh b/t/t9130-git-svn-authors-file.sh index 41264818cc..d8262854bb 100755 --- a/t/t9130-git-svn-authors-file.sh +++ b/t/t9130-git-svn-authors-file.sh @@ -26,11 +26,12 @@ test_expect_success 'start import with incomplete authors file' ' test_expect_success 'imported 2 revisions successfully' ' ( cd x - test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 2 && - git rev-list -1 --pretty=raw refs/remotes/git-svn | \ - grep "^author BBBBBBB BBBBBBB <bb@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ - grep "^author AAAAAAA AAAAAAA <aa@example\.com> " + git rev-list refs/remotes/git-svn >actual && + test_line_count = 2 actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author BBBBBBB BBBBBBB <bb@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~1 >actual && + grep "^author AAAAAAA AAAAAAA <aa@example\.com> " actual ) ' @@ -43,11 +44,12 @@ test_expect_success 'continues to import once authors have been added' ' ( cd x git svn fetch --authors-file=../svn-authors && - test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 4 && - git rev-list -1 --pretty=raw refs/remotes/git-svn | \ - grep "^author DDDDDDD DDDDDDD <dd@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ - grep "^author CCCCCCC CCCCCCC <cc@example\.com> " + git rev-list refs/remotes/git-svn >actual && + test_line_count = 4 actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author DDDDDDD DDDDDDD <dd@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~1 >actual && + grep "^author CCCCCCC CCCCCCC <cc@example\.com> " actual ) ' @@ -102,12 +104,28 @@ test_expect_success !MINGW 'fresh clone with svn.authors-file in config' ' test x"$HOME"/svn-authors = x"$(git config svn.authorsfile)" && git svn clone "$svnrepo" gitconfig.clone && cd gitconfig.clone && - nr_ex=$(git log | grep "^Author:.*example.com" | wc -l) && - nr_rev=$(git rev-list HEAD | wc -l) && + git log >actual && + nr_ex=$(grep "^Author:.*example.com" actual | wc -l) && + git rev-list HEAD >actual && + nr_rev=$(wc -l <actual) && test $nr_rev -eq $nr_ex ) ' +cat >> svn-authors <<EOF +ff = FFFFFFF FFFFFFF <> +EOF + +test_expect_success 'authors-file imported user without email' ' + svn_cmd mkdir -m aa/branches/ff --username ff "$svnrepo/aa/branches/ff" && + ( + cd aa-work && + git svn fetch --authors-file=../svn-authors && + git rev-list -1 --pretty=raw refs/remotes/origin/ff | \ + grep "^author FFFFFFF FFFFFFF <> " + ) + ' + test_debug 'GIT_DIR=gitconfig.clone/.git git log' test_done diff --git a/t/t9138-git-svn-authors-prog.sh b/t/t9138-git-svn-authors-prog.sh index 7d7e9d46bc..93ef44fae8 100755 --- a/t/t9138-git-svn-authors-prog.sh +++ b/t/t9138-git-svn-authors-prog.sh @@ -9,7 +9,9 @@ test_description='git svn authors prog tests' write_script svn-authors-prog "$PERL_PATH" <<-\EOF $_ = shift; - if (s/-sub$//) { + if (s/-hermit//) { + print "$_ <>\n"; + } elsif (s/-sub$//) { print "$_ <$_\@sub.example.com>\n"; } else { print "$_ <$_\@example.com>\n"; @@ -37,44 +39,67 @@ test_expect_success 'import authors with prog and file' ' test_expect_success 'imported 6 revisions successfully' ' ( cd x - test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 6 + git rev-list refs/remotes/git-svn >actual && + test_line_count = 6 actual ) ' test_expect_success 'authors-prog ran correctly' ' ( cd x - git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ - grep "^author ee-foo <ee-foo@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~2 | \ - grep "^author dd <dd@sub\.example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~3 | \ - grep "^author cc <cc@sub\.example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~4 | \ - grep "^author bb <bb@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~5 | \ - grep "^author aa <aa@example\.com> " + git rev-list -1 --pretty=raw refs/remotes/git-svn~1 >actual && + grep "^author ee-foo <ee-foo@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~2 >actual && + grep "^author dd <dd@sub\.example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~3 >actual && + grep "^author cc <cc@sub\.example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~4 >actual && + grep "^author bb <bb@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~5 >actual && + grep "^author aa <aa@example\.com> " actual ) ' test_expect_success 'authors-file overrode authors-prog' ' ( cd x - git rev-list -1 --pretty=raw refs/remotes/git-svn | \ - grep "^author FFFFFFF FFFFFFF <fFf@other\.example\.com> " + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author FFFFFFF FFFFFFF <fFf@other\.example\.com> " actual ) ' git --git-dir=x/.git config --unset svn.authorsfile git --git-dir=x/.git config --unset svn.authorsprog +test_expect_success 'authors-prog imported user without email' ' + svn mkdir -m gg --username gg-hermit "$svnrepo"/gg && + ( + cd x && + git svn fetch --authors-prog=../svn-authors-prog && + git rev-list -1 --pretty=raw refs/remotes/git-svn | \ + grep "^author gg <> " + ) +' + +test_expect_success 'imported without authors-prog and authors-file' ' + svn mkdir -m hh --username hh "$svnrepo"/hh && + ( + uuid=$(svn info "$svnrepo" | + sed -n "s/^Repository UUID: //p") && + cd x && + git svn fetch && + git rev-list -1 --pretty=raw refs/remotes/git-svn | \ + grep "^author hh <hh@$uuid> " + ) +' + test_expect_success 'authors-prog handled special characters in username' ' svn mkdir -m bad --username "xyz; touch evil" "$svnrepo"/bad && ( cd x && git svn --authors-prog=../svn-authors-prog fetch && - git rev-list -1 --pretty=raw refs/remotes/git-svn | - grep "^author xyz; touch evil <xyz; touch evil@example\.com> " && + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author xyz; touch evil <xyz; touch evil@example\.com> " actual && ! test -f evil ) ' diff --git a/t/t9153-git-svn-rewrite-uuid.sh b/t/t9153-git-svn-rewrite-uuid.sh index 372ef15685..8cb2b5c69c 100755 --- a/t/t9153-git-svn-rewrite-uuid.sh +++ b/t/t9153-git-svn-rewrite-uuid.sh @@ -16,10 +16,10 @@ test_expect_success 'load svn repo' " " test_expect_success 'verify uuid' " - git cat-file commit refs/remotes/git-svn~0 | \ - grep '^git-svn-id: .*@2 $uuid$' && - git cat-file commit refs/remotes/git-svn~1 | \ - grep '^git-svn-id: .*@1 $uuid$' + git cat-file commit refs/remotes/git-svn~0 >actual && + grep '^git-svn-id: .*@2 $uuid$' actual && + git cat-file commit refs/remotes/git-svn~1 >actual && + grep '^git-svn-id: .*@1 $uuid$' actual " test_done diff --git a/t/t9168-git-svn-partially-globbed-names.sh b/t/t9168-git-svn-partially-globbed-names.sh index 8b22f2272c..bdf6e84999 100755 --- a/t/t9168-git-svn-partially-globbed-names.sh +++ b/t/t9168-git-svn-partially-globbed-names.sh @@ -48,8 +48,8 @@ test_expect_success 'test refspec prefixed globbing' ' git config --add svn-remote.svn.tags\ "tags/t_*/src/a:refs/remotes/tags/t_*" && git svn multi-fetch && - git log --pretty=oneline refs/remotes/tags/t_end | \ - sed -e "s/^.\{41\}//" >output.end && + git log --pretty=oneline refs/remotes/tags/t_end >actual && + sed -e "s/^.\{41\}//" actual >output.end && test_cmp expect.end output.end && test "$(git rev-parse refs/remotes/tags/t_end~1)" = \ "$(git rev-parse refs/remotes/branches/b_start)" && @@ -78,14 +78,16 @@ test_expect_success 'test left-hand-side only prefixed globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test $(git rev-list refs/remotes/two/tags/t_end | wc -l) -eq 6 && - test $(git rev-list refs/remotes/two/branches/b_start | wc -l) -eq 3 && + git rev-list refs/remotes/two/tags/t_end >actual && + test_line_count = 6 actual && + git rev-list refs/remotes/two/branches/b_start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/two/branches/b_start~2) = \ $(git rev-parse refs/remotes/two/trunk) && test $(git rev-parse refs/remotes/two/tags/t_end~3) = \ $(git rev-parse refs/remotes/two/branches/b_start) && - git log --pretty=oneline refs/remotes/two/tags/t_end | \ - sed -e "s/^.\{41\}//" >output.two && + git log --pretty=oneline refs/remotes/two/tags/t_end >actual && + sed -e "s/^.\{41\}//" actual >output.two && test_cmp expect.two output.two ' @@ -118,14 +120,16 @@ test_expect_success 'test prefixed globs match just prefix' ' svn_cmd up ) && git svn fetch three && - test $(git rev-list refs/remotes/three/branches/b_ | wc -l) -eq 2 && - test $(git rev-list refs/remotes/three/tags/t_ | wc -l) -eq 3 && + git rev-list refs/remotes/three/branches/b_ >actual && + test_line_count = 2 actual && + git rev-list refs/remotes/three/tags/t_ >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/three/branches/b_~1) = \ $(git rev-parse refs/remotes/three/trunk) && test $(git rev-parse refs/remotes/three/tags/t_~1) = \ $(git rev-parse refs/remotes/three/branches/b_) && - git log --pretty=oneline refs/remotes/three/tags/t_ | \ - sed -e "s/^.\{41\}//" >output.three && + git log --pretty=oneline refs/remotes/three/tags/t_ >actual && + sed -e "s/^.\{41\}//" actual >output.three && test_cmp expect.three output.three ' @@ -186,14 +190,16 @@ test_expect_success 'test globbing in the middle of the word' ' svn_cmd up ) && git svn fetch five && - test $(git rev-list refs/remotes/five/branches/abcde | wc -l) -eq 2 && - test $(git rev-list refs/remotes/five/tags/fghij | wc -l) -eq 3 && + git rev-list refs/remotes/five/branches/abcde >actual && + test_line_count = 2 actual && + git rev-list refs/remotes/five/tags/fghij >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/five/branches/abcde~1) = \ $(git rev-parse refs/remotes/five/trunk) && test $(git rev-parse refs/remotes/five/tags/fghij~1) = \ $(git rev-parse refs/remotes/five/branches/abcde) && - git log --pretty=oneline refs/remotes/five/tags/fghij | \ - sed -e "s/^.\{41\}//" >output.five && + git log --pretty=oneline refs/remotes/five/tags/fghij >actual && + sed -e "s/^.\{41\}//" actual >output.five && test_cmp expect.five output.five ' diff --git a/t/t9169-git-svn-dcommit-crlf.sh b/t/t9169-git-svn-dcommit-crlf.sh new file mode 100755 index 0000000000..54b1f61a2a --- /dev/null +++ b/t/t9169-git-svn-dcommit-crlf.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +test_description='git svn dcommit CRLF' +. ./lib-git-svn.sh + +test_expect_success 'setup commit repository' ' + svn_cmd mkdir -m "$test_description" "$svnrepo/dir" && + git svn clone "$svnrepo" work && + ( + cd work && + echo foo >>foo && + git update-index --add foo && + printf "a\\r\\n\\r\\nb\\r\\nc\\r\\n" >cmt && + p=$(git rev-parse HEAD) && + t=$(git write-tree) && + cmt=$(git commit-tree -p $p $t <cmt) && + git update-ref refs/heads/master $cmt && + git cat-file commit HEAD | tail -n4 >out && + test_cmp cmt out && + git svn dcommit && + printf "a\\n\\nb\\nc\\n" >exp && + git cat-file commit HEAD | sed -ne 6,9p >out && + test_cmp exp out + ) +' + +test_done diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index d47560b634..dc79df7b04 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -876,7 +876,7 @@ test_expect_success 'L: verify internal tree sorting' ' EXPECT_END git fast-import <input && - git diff-tree --abbrev --raw L^ L >output && + GIT_PRINT_SHA1_ELLIPSIS="yes" git diff-tree --abbrev --raw L^ L >output && test_cmp expect output ' @@ -2654,7 +2654,7 @@ test_expect_success 'R: corrupt lines do not mess marks file' ' ## test_expect_success 'R: blob bigger than threshold' ' blobsize=$((2*1024*1024 + 53)) && - test-genrandom bar $blobsize >expect && + test-tool genrandom bar $blobsize >expect && cat >input <<-INPUT_END && commit refs/heads/big-file committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 866ddf6058..6a392e87bc 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -43,20 +43,20 @@ test_expect_success 'fast-export | fast-import' ' MUSS=$(git rev-parse --verify muss) && mkdir new && git --git-dir=new/.git init && - git fast-export --all | + git fast-export --all >actual && (cd new && git fast-import && test $MASTER = $(git rev-parse --verify refs/heads/master) && test $REIN = $(git rev-parse --verify refs/tags/rein) && test $WER = $(git rev-parse --verify refs/heads/wer) && - test $MUSS = $(git rev-parse --verify refs/tags/muss)) + test $MUSS = $(git rev-parse --verify refs/tags/muss)) <actual ' test_expect_success 'fast-export master~2..master' ' - git fast-export master~2..master | - sed "s/master/partial/" | + git fast-export master~2..master >actual && + sed "s/master/partial/" actual | (cd new && git fast-import && test $MASTER != $(git rev-parse --verify refs/heads/partial) && @@ -74,11 +74,12 @@ test_expect_success 'iso-8859-1' ' test_tick && echo rosten >file && git commit -s -m den file && - git fast-export wer^..wer | - sed "s/wer/i18n/" | + git fast-export wer^..wer >iso8859-1.fi && + sed "s/wer/i18n/" iso8859-1.fi | (cd new && git fast-import && - git cat-file commit i18n | grep "Áéí óú") + git cat-file commit i18n >actual && + grep "Áéí óú" actual) ' test_expect_success 'import/export-marks' ' @@ -87,20 +88,14 @@ test_expect_success 'import/export-marks' ' git fast-export --export-marks=tmp-marks HEAD && test -s tmp-marks && test_line_count = 3 tmp-marks && - test $( - git fast-export --import-marks=tmp-marks\ - --export-marks=tmp-marks HEAD | - grep ^commit | - wc -l) \ - -eq 0 && + git fast-export --import-marks=tmp-marks \ + --export-marks=tmp-marks HEAD >actual && + test $(grep ^commit actual | wc -l) -eq 0 && echo change > file && git commit -m "last commit" file && - test $( - git fast-export --import-marks=tmp-marks \ - --export-marks=tmp-marks HEAD | - grep ^commit\ | - wc -l) \ - -eq 1 && + git fast-export --import-marks=tmp-marks \ + --export-marks=tmp-marks HEAD >actual && + test $(grep ^commit\ actual | wc -l) -eq 1 && test_line_count = 4 tmp-marks ' @@ -184,7 +179,7 @@ test_expect_success 'submodule fast-export | fast-import' ' rm -rf new && mkdir new && git --git-dir=new/.git init && - git fast-export --signed-tags=strip --all | + git fast-export --signed-tags=strip --all >actual && (cd new && git fast-import && test "$SUBENT1" = "$(git ls-tree refs/heads/master^ sub)" && @@ -192,7 +187,7 @@ test_expect_success 'submodule fast-export | fast-import' ' git checkout master && git submodule init && git submodule update && - cmp sub/file ../sub/file) + cmp sub/file ../sub/file) <actual ' @@ -367,12 +362,14 @@ test_expect_success 'path limiting with import-marks does not lose unmodified fi echo more content >> file && test_tick && git commit -mnext file && - git fast-export --import-marks=marks simple -- file file0 | grep file0 + git fast-export --import-marks=marks simple -- file file0 >actual && + grep file0 actual ' test_expect_success 'full-tree re-shows unmodified files' ' git checkout -f simple && - test $(git fast-export --full-tree simple | grep -c file0) -eq 3 + git fast-export --full-tree simple >actual && + test $(grep -c file0 actual) -eq 3 ' test_expect_success 'set-up a few more tags for tag export tests' ' @@ -505,8 +502,8 @@ test_expect_success 'refs are updated even if no commits need to be exported' ' ' test_expect_success 'use refspec' ' - git fast-export --refspec refs/heads/master:refs/heads/foobar master | \ - grep "^commit " | sort | uniq > actual && + git fast-export --refspec refs/heads/master:refs/heads/foobar master >actual2 && + grep "^commit " actual2 | sort | uniq >actual && echo "commit refs/heads/foobar" > expected && test_cmp expected actual ' @@ -534,10 +531,29 @@ test_expect_success 'when using -C, do not declare copy when source of copy is a git -C src commit -m 2nd_commit && test_create_repo dst && - git -C src fast-export --all -C | git -C dst fast-import && + git -C src fast-export --all -C >actual && + git -C dst fast-import <actual && git -C src show >expected && git -C dst show >actual && test_cmp expected actual ' +test_expect_success 'merge commit gets exported with --import-marks' ' + test_create_repo merging && + ( + cd merging && + test_commit initial && + git checkout -b topic && + test_commit on-topic && + git checkout master && + test_commit on-master && + test_tick && + git merge --no-ff -m Yeah topic && + + echo ":1 $(git rev-parse HEAD^^)" >marks && + git fast-export --import-marks=marks master >out && + grep Yeah out + ) +' + test_done diff --git a/t/t9400-git-cvsserver-server.sh b/t/t9400-git-cvsserver-server.sh index c30660d606..06742748e9 100755 --- a/t/t9400-git-cvsserver-server.sh +++ b/t/t9400-git-cvsserver-server.sh @@ -447,12 +447,10 @@ test_expect_success 'cvs update (-p)' ' git push gitcvs.git >/dev/null && cd cvswork && GIT_CONFIG="$git_config" cvs update && - rm -f failures && for i in merge no-lf empty really-empty; do - GIT_CONFIG="$git_config" cvs update -p "$i" >$i.out - test_cmp $i.out ../$i >>failures 2>&1 - done && - test -z "$(cat failures)" + GIT_CONFIG="$git_config" cvs update -p "$i" >$i.out && + test_cmp $i.out ../$i || return 1 + done ' cd "$WORKDIR" diff --git a/t/t9402-git-cvsserver-refs.sh b/t/t9402-git-cvsserver-refs.sh index 6d2d3c8739..cf31ace667 100755 --- a/t/t9402-git-cvsserver-refs.sh +++ b/t/t9402-git-cvsserver-refs.sh @@ -455,20 +455,20 @@ test_expect_success 'cvs up -r $(git rev-parse v1)' ' ' test_expect_success 'cvs diff -r v1 -u' ' - ( cd cvswork && cvs -f diff -r v1 -u ) >cvsDiff.out 2>cvs.log && + ( cd cvswork && cvs -f diff -r v1 -u >../cvsDiff.out 2>../cvs.log ) && test_must_be_empty cvsDiff.out && test_must_be_empty cvs.log ' test_expect_success 'cvs diff -N -r v2 -u' ' - ( cd cvswork && ! cvs -f diff -N -r v2 -u ) >cvsDiff.out 2>cvs.log && + ( cd cvswork && ! cvs -f diff -N -r v2 -u >../cvsDiff.out 2>../cvs.log ) && test_must_be_empty cvs.log && test -s cvsDiff.out && check_diff cvsDiff.out v2 v1 >check_diff.out 2>&1 ' test_expect_success 'cvs diff -N -r v2 -r v1.2' ' - ( cd cvswork && ! cvs -f diff -N -r v2 -r v1.2 -u ) >cvsDiff.out 2>cvs.log && + ( cd cvswork && ! cvs -f diff -N -r v2 -r v1.2 -u >../cvsDiff.out 2>../cvs.log ) && test_must_be_empty cvs.log && test -s cvsDiff.out && check_diff cvsDiff.out v2 v1.2 >check_diff.out 2>&1 @@ -487,7 +487,7 @@ test_expect_success 'apply early [cvswork3] diff to b3' ' ' test_expect_success 'check [cvswork3] diff' ' - ( cd cvswork3 && ! cvs -f diff -N -u ) >"$WORKDIR/cvsDiff.out" 2>cvs.log && + ( cd cvswork3 && ! cvs -f diff -N -u >"$WORKDIR/cvsDiff.out" 2>../cvs.log ) && test_must_be_empty cvs.log && test -s cvsDiff.out && test $(grep Index: cvsDiff.out | wc -l) = 3 && diff --git a/t/t9802-git-p4-filetype.sh b/t/t9802-git-p4-filetype.sh index eb9a8ed197..1fc9b33aeb 100755 --- a/t/t9802-git-p4-filetype.sh +++ b/t/t9802-git-p4-filetype.sh @@ -237,7 +237,7 @@ test_expect_success 'ignore apple' ' build_gendouble && ( cd "$cli" && - test-genrandom apple 1024 >double.png && + test-tool genrandom apple 1024 >double.png && "$PYTHON_PATH" "$TRASH_DIRECTORY/gendouble.py" >%double.png && p4 add -t apple double.png && p4 submit -d appledouble diff --git a/t/t9803-git-p4-shell-metachars.sh b/t/t9803-git-p4-shell-metachars.sh index d950c7d665..d5c3675100 100755 --- a/t/t9803-git-p4-shell-metachars.sh +++ b/t/t9803-git-p4-shell-metachars.sh @@ -28,7 +28,7 @@ test_expect_success 'shell metachars in filenames' ' echo f2 >"file with spaces" && git add "file with spaces" && git commit -m "add files" && - P4EDITOR="test-chmtime +5" git p4 submit + P4EDITOR="test-tool chmtime +5" git p4 submit ) && ( cd "$cli" && @@ -47,7 +47,7 @@ test_expect_success 'deleting with shell metachars' ' git rm foo\$bar && git rm file\ with\ spaces && git commit -m "remove files" && - P4EDITOR="test-chmtime +5" git p4 submit + P4EDITOR="test-tool chmtime +5" git p4 submit ) && ( cd "$cli" && diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 3457d5db64..71cae2874d 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -460,7 +460,13 @@ test_expect_success 'submit --shelve' ' ) ' -# Update an existing shelved changelist +make_shelved_cl() { + test_commit "$1" >/dev/null && + git p4 submit --origin HEAD^ --shelve >/dev/null && + p4 -G changes -s shelved -m 1 | marshal_dump change +} + +# Update existing shelved changelists test_expect_success 'submit --update-shelve' ' test_when_finished cleanup_git && @@ -470,21 +476,19 @@ test_expect_success 'submit --update-shelve' ' p4 revert ... && cd "$git" && git config git-p4.skipSubmitEdit true && - test_commit "test-update-shelved-change" && - git p4 submit --origin=HEAD^ --shelve && + shelved_cl0=$(make_shelved_cl "shelved-change-0") && + echo shelved_cl0=$shelved_cl0 && + shelved_cl1=$(make_shelved_cl "shelved-change-1") && - shelf_cl=$(p4 -G changes -s shelved -m 1 |\ - marshal_dump change) && - test -n $shelf_cl && - echo "updating shelved change list $shelf_cl" && + echo "updating shelved change lists $shelved_cl0 and $shelved_cl1" && echo "updated-line" >>shelf.t && echo added-file.t >added-file.t && git add shelf.t added-file.t && - git rm -f test-update-shelved-change.t && + git rm -f shelved-change-1.t && git commit --amend -C HEAD && git show --stat HEAD && - git p4 submit -v --origin HEAD^ --update-shelve $shelf_cl && + git p4 submit -v --origin HEAD~2 --update-shelve $shelved_cl0 --update-shelve $shelved_cl1 && echo "done git p4 submit" ) && ( @@ -494,7 +498,7 @@ test_expect_success 'submit --update-shelve' ' p4 unshelve -c $change -s $change && grep -q updated-line shelf.t && p4 describe -S $change | grep added-file.t && - test_path_is_missing test-update-shelved-change.t + test_path_is_missing shelved-change-1.t ) ' diff --git a/t/t9813-git-p4-preserve-users.sh b/t/t9813-git-p4-preserve-users.sh index bda222aa02..783c6ad165 100755 --- a/t/t9813-git-p4-preserve-users.sh +++ b/t/t9813-git-p4-preserve-users.sh @@ -53,7 +53,7 @@ test_expect_success 'preserve users' ' git commit --author "Alice <alice@example.com>" -m "a change by alice" file1 && git commit --author "Bob <bob@example.com>" -m "a change by bob" file2 && git config git-p4.skipSubmitEditCheck true && - P4EDITOR="test-chmtime +5" P4USER=alice P4PASSWD=secret && + P4EDITOR="test-tool chmtime +5" P4USER=alice P4PASSWD=secret && export P4EDITOR P4USER P4PASSWD && git p4 commit --preserve-user && p4_check_commit_author file1 alice && @@ -71,7 +71,7 @@ test_expect_success 'refuse to preserve users without perms' ' git config git-p4.skipSubmitEditCheck true && echo "username-noperms: a change by alice" >>file1 && git commit --author "Alice <alice@example.com>" -m "perms: a change by alice" file1 && - P4EDITOR="test-chmtime +5" P4USER=bob P4PASSWD=secret && + P4EDITOR="test-tool chmtime +5" P4USER=bob P4PASSWD=secret && export P4EDITOR P4USER P4PASSWD && test_must_fail git p4 commit --preserve-user && ! git diff --exit-code HEAD..p4/master @@ -89,7 +89,7 @@ test_expect_success 'preserve user where author is unknown to p4' ' git commit --author "Bob <bob@example.com>" -m "preserve: a change by bob" file1 && echo "username-unknown: a change by charlie" >>file1 && git commit --author "Charlie <charlie@example.com>" -m "preserve: a change by charlie" file1 && - P4EDITOR="test-chmtime +5" P4USER=alice P4PASSWD=secret && + P4EDITOR="test-tool chmtime +5" P4USER=alice P4PASSWD=secret && export P4EDITOR P4USER P4PASSWD && test_must_fail git p4 commit --preserve-user && ! git diff --exit-code HEAD..p4/master && diff --git a/t/t9820-git-p4-editor-handling.sh b/t/t9820-git-p4-editor-handling.sh index 6dc6df032e..3c22f74bd4 100755 --- a/t/t9820-git-p4-editor-handling.sh +++ b/t/t9820-git-p4-editor-handling.sh @@ -26,7 +26,7 @@ test_expect_success 'EDITOR with options' ' cd "$git" && echo change >file1 && git commit -m "change" file1 && - P4EDITOR=": >\"$git/touched\" && test-chmtime +5" git p4 submit && + P4EDITOR=": >\"$git/touched\" && test-tool chmtime +5" git p4 submit && test_path_is_file "$git/touched" ) ' diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 2cb999ecfa..1b34caa1e1 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -1237,14 +1237,20 @@ test_expect_success 'double dash "git" itself' ' test_expect_success 'double dash "git checkout"' ' test_completion "git checkout --" <<-\EOF --quiet Z + --detach Z + --track Z + --orphan=Z --ours Z --theirs Z - --track Z - --no-track Z --merge Z - --conflict= - --orphan Z + --conflict=Z --patch Z + --ignore-skip-worktree-bits Z + --ignore-other-worktrees Z + --recurse-submodules Z + --progress Z + --no-track Z + --no-recurse-submodules Z EOF ' @@ -1448,6 +1454,12 @@ test_expect_success 'completion used <cmd> completion for alias: !f() { : git <c EOF ' +test_expect_success 'completion without explicit _git_xxx function' ' + test_completion "git version --" <<-\EOF + --build-options Z + EOF +' + test_expect_failure 'complete with tilde expansion' ' git init tmp && cd tmp && test_when_finished "cd .. && rm -rf tmp" && @@ -1491,4 +1503,35 @@ do ' done +test_expect_success 'sourcing the completion script clears cached commands' ' + __git_compute_all_commands && + verbose test -n "$__git_all_commands" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__git_all_commands" +' + +test_expect_success 'sourcing the completion script clears cached porcelain commands' ' + __git_compute_porcelain_commands && + verbose test -n "$__git_porcelain_commands" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__git_porcelain_commands" +' + +test_expect_success !GETTEXT_POISON 'sourcing the completion script clears cached merge strategies' ' + __git_compute_merge_strategies && + verbose test -n "$__git_merge_strategies" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__git_merge_strategies" +' + +test_expect_success 'sourcing the completion script clears cached --options' ' + __gitcomp_builtin checkout && + verbose test -n "$__gitcomp_builtin_checkout" && + __gitcomp_builtin notes_edit && + verbose test -n "$__gitcomp_builtin_notes_edit" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__gitcomp_builtin_checkout" && + verbose test -z "$__gitcomp_builtin_notes_edit" +' + test_done diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 97c9b32c2e..8f5c811dd7 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -735,22 +735,12 @@ test_expect_success 'prompt - hide if pwd ignored - env var set, config unset, p test_cmp expected "$actual" ' -test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stdout)' ' +test_expect_success 'prompt - hide if pwd ignored - inside gitdir' ' printf " (GIT_DIR!)" >expected && ( GIT_PS1_HIDE_IF_PWD_IGNORED=y && cd .git && - __git_ps1 >"$actual" 2>/dev/null - ) && - test_cmp expected "$actual" -' - -test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stderr)' ' - printf "" >expected && - ( - GIT_PS1_HIDE_IF_PWD_IGNORED=y && - cd .git && - __git_ps1 >/dev/null 2>"$actual" + __git_ps1 >"$actual" ) && test_cmp expected "$actual" ' diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 1701fe2a06..2b2181dca0 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -145,12 +145,28 @@ test_pause () { "$SHELL_PATH" <&6 >&5 2>&7 } -# Wrap git in gdb. Adding this to a command can make it easier to -# understand what is going on in a failing test. +# Wrap git with a debugger. Adding this to a command can make it easier +# to understand what is going on in a failing test. # -# Example: "debug git checkout master". +# Examples: +# debug git checkout master +# debug --debugger=nemiver git $ARGS +# debug -d "valgrind --tool=memcheck --track-origins=yes" git $ARGS debug () { - GIT_TEST_GDB=1 "$@" <&6 >&5 2>&7 + case "$1" in + -d) + GIT_DEBUGGER="$2" && + shift 2 + ;; + --debugger=*) + GIT_DEBUGGER="${1#*=}" && + shift 1 + ;; + *) + GIT_DEBUGGER=1 + ;; + esac && + GIT_DEBUGGER="${GIT_DEBUGGER}" "$@" <&6 >&5 2>&7 } # Call test_commit with the arguments @@ -278,8 +294,20 @@ write_script () { # The single parameter is the prerequisite tag (a simple word, in all # capital letters by convention). +test_unset_prereq () { + ! test_have_prereq "$1" || + satisfied_prereq="${satisfied_prereq% $1 *} ${satisfied_prereq#* $1 }" +} + test_set_prereq () { - satisfied_prereq="$satisfied_prereq$1 " + case "$1" in + !*) + test_unset_prereq "${1#!}" + ;; + *) + satisfied_prereq="$satisfied_prereq$1 " + ;; + esac } satisfied_prereq=" " lazily_testable_prereq= lazily_tested_prereq= @@ -610,6 +638,14 @@ list_contains () { # # Writing this as "! git checkout ../outerspace" is wrong, because # the failure could be due to a segv. We want a controlled failure. +# +# Accepts the following options: +# +# ok=<signal-name>[,<...>]: +# Don't treat an exit caused by the given signal as error. +# Multiple signals can be specified as a comma separated list. +# Currently recognized signal names are: sigpipe, success. +# (Don't use 'success', use 'test_might_fail' instead.) test_must_fail () { case "$1" in @@ -621,30 +657,30 @@ test_must_fail () { _test_ok= ;; esac - "$@" + "$@" 2>&7 exit_code=$? if test $exit_code -eq 0 && ! list_contains "$_test_ok" success then - echo >&2 "test_must_fail: command succeeded: $*" + echo >&4 "test_must_fail: command succeeded: $*" return 1 elif test_match_signal 13 $exit_code && list_contains "$_test_ok" sigpipe then return 0 elif test $exit_code -gt 129 && test $exit_code -le 192 then - echo >&2 "test_must_fail: died by signal $(($exit_code - 128)): $*" + echo >&4 "test_must_fail: died by signal $(($exit_code - 128)): $*" return 1 elif test $exit_code -eq 127 then - echo >&2 "test_must_fail: command not found: $*" + echo >&4 "test_must_fail: command not found: $*" return 1 elif test $exit_code -eq 126 then - echo >&2 "test_must_fail: valgrind error: $*" + echo >&4 "test_must_fail: valgrind error: $*" return 1 fi return 0 -} +} 7>&2 2>&4 # Similar to test_must_fail, but tolerates success, too. This is # meant to be used in contexts like: @@ -656,10 +692,12 @@ test_must_fail () { # # Writing "git config --unset all.configuration || :" would be wrong, # because we want to notice if it fails due to segv. +# +# Accepts the same options as test_must_fail. test_might_fail () { - test_must_fail ok=success "$@" -} + test_must_fail ok=success "$@" 2>&7 +} 7>&2 2>&4 # Similar to test_must_fail and test_might_fail, but check that a # given command exited with a given exit code. Meant to be used as: @@ -671,16 +709,16 @@ test_might_fail () { test_expect_code () { want_code=$1 shift - "$@" + "$@" 2>&7 exit_code=$? if test $exit_code = $want_code then return 0 fi - echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" + echo >&4 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" return 1 -} +} 7>&2 2>&4 # test_cmp is a helper function to compare actual and expected output. # You can use it like: @@ -705,12 +743,66 @@ test_cmp_bin() { cmp "$@" } +# Use this instead of test_cmp to compare files that contain expected and +# actual output from git commands that can be translated. When running +# under GETTEXT_POISON this pretends that the command produced expected +# results. +test_i18ncmp () { + test -n "$GETTEXT_POISON" || test_cmp "$@" +} + +# Use this instead of "grep expected-string actual" to see if the +# output from a git command that can be translated either contains an +# expected string, or does not contain an unwanted one. When running +# under GETTEXT_POISON this pretends that the command produced expected +# results. +test_i18ngrep () { + eval "last_arg=\${$#}" + + test -f "$last_arg" || + error "bug in the test script: test_i18ngrep requires a file" \ + "to read as the last parameter" + + if test $# -lt 2 || + { test "x!" = "x$1" && test $# -lt 3 ; } + then + error "bug in the test script: too few parameters to test_i18ngrep" + fi + + if test -n "$GETTEXT_POISON" + then + # pretend success + return 0 + fi + + if test "x!" = "x$1" + then + shift + ! grep "$@" && return 0 + + echo >&4 "error: '! grep $@' did find a match in:" + else + grep "$@" && return 0 + + echo >&4 "error: 'grep $@' didn't find a match in:" + fi + + if test -s "$last_arg" + then + cat >&4 "$last_arg" + else + echo >&4 "<File '$last_arg' is empty>" + fi + + return 1 +} + # Call any command "$@" but be more verbose about its # failure. This is handy for commands like "test" which do # not output anything when they fail. verbose () { "$@" && return 0 - echo >&2 "command failed: $(git rev-parse --sq-quote "$@")" + echo >&4 "command failed: $(git rev-parse --sq-quote "$@")" return 1 } @@ -718,6 +810,7 @@ verbose () { # otherwise. test_must_be_empty () { + test_path_is_file "$1" && if test -s "$1" then echo "'$1' is not empty, it contains:" @@ -828,8 +921,8 @@ test_write_lines () { } perl () { - command "$PERL_PATH" "$@" -} + command "$PERL_PATH" "$@" 2>&7 +} 7>&2 2>&4 # Is the value one of the various ways to spell a boolean true/false? test_normalize_bool () { @@ -969,13 +1062,13 @@ test_env () { shift ;; *) - "$@" + "$@" 2>&7 exit ;; esac done ) -} +} 7>&2 2>&4 # Returns true if the numeric exit code in "$2" represents the expected signal # in "$1". Signals should be given numerically. @@ -1017,6 +1110,40 @@ nongit () { GIT_CEILING_DIRECTORIES=$(pwd) && export GIT_CEILING_DIRECTORIES && cd non-repo && - "$@" + "$@" 2>&7 ) +} 7>&2 2>&4 + +# convert stdin to pktline representation; note that empty input becomes an +# empty packet, not a flush packet (for that you can just print 0000 yourself). +packetize() { + cat >packetize.tmp && + len=$(wc -c <packetize.tmp) && + printf '%04x%s' "$(($len + 4))" && + cat packetize.tmp && + rm -f packetize.tmp +} + +# Parse the input as a series of pktlines, writing the result to stdout. +# Sideband markers are removed automatically, and the output is routed to +# stderr if appropriate. +# +# NUL bytes are converted to "\\0" for ease of parsing with text tools. +depacketize () { + perl -e ' + while (read(STDIN, $len, 4) == 4) { + if ($len eq "0000") { + print "FLUSH\n"; + } else { + read(STDIN, $buf, hex($len) - 4); + $buf =~ s/\0/\\0/g; + if ($buf =~ s/^[\x2\x3]//) { + print STDERR $buf; + } else { + $buf =~ s/^\x1//; + print $buf; + } + } + } + ' } diff --git a/t/test-lib.sh b/t/test-lib.sh index 8abd135a47..f3771ab195 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -44,6 +44,11 @@ GIT_BUILD_DIR="$TEST_DIRECTORY"/.. : ${ASAN_OPTIONS=detect_leaks=0:abort_on_error=1} export ASAN_OPTIONS +# If LSAN is in effect we _do_ want leak checking, but we still +# want to abort so that we notice the problems. +: ${LSAN_OPTIONS=abort_on_error=1} +export LSAN_OPTIONS + ################################################################ # It appears that people try to run tests without building... "$GIT_BUILD_DIR/git" >/dev/null @@ -75,7 +80,7 @@ done,*) # from any previous runs. >"$GIT_TEST_TEE_OUTPUT_FILE" - (GIT_TEST_TEE_STARTED=done ${SHELL_PATH} "$0" "$@" 2>&1; + (GIT_TEST_TEE_STARTED=done ${TEST_SHELL_PATH} "$0" "$@" 2>&1; echo $? >"$BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE" test "$(cat "$BASE.exit")" = 0 exit @@ -111,6 +116,7 @@ unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e ' my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); print join("\n", @vars); ') +unset XDG_CACHE_HOME unset XDG_CONFIG_HOME unset GITPERLLIB GIT_AUTHOR_EMAIL=author@example.com @@ -170,9 +176,10 @@ esac # Convenience # -# A regexp to match 5 and 40 hexdigits +# A regexp to match 5, 35 and 40 hexdigits _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' -_x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05" +_x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05" +_x40="$_x35$_x05" # Zero SHA-1 _z40=0000000000000000000000000000000000000000 @@ -188,7 +195,7 @@ LF=' # when case-folding filenames u200c=$(printf '\342\200\214') -export _x05 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB +export _x05 _x35 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB # Each test should start with something like this, after copyright notices: # @@ -257,8 +264,24 @@ do GIT_TEST_CHAIN_LINT=0 shift ;; -x) - trace=t - verbose=t + # Some test scripts can't be reliably traced with '-x', + # unless the test is run with a Bash version supporting + # BASH_XTRACEFD (introduced in Bash v4.1). Check whether + # this test is marked as such, and ignore '-x' if it + # isn't executed with a suitable Bash version. + if test -z "$test_untraceable" || { + test -n "$BASH_VERSION" && { + test ${BASH_VERSINFO[0]} -gt 4 || { + test ${BASH_VERSINFO[0]} -eq 4 && + test ${BASH_VERSINFO[1]} -ge 1 + } + } + } + then + trace=t + else + echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" + fi shift ;; --verbose-log) verbose_log=t @@ -274,6 +297,11 @@ then test -z "$verbose" && verbose_only="$valgrind_only" elif test -n "$valgrind" then + test -z "$verbose_log" && verbose=t +fi + +if test -n "$trace" && test -z "$verbose_log" +then verbose=t fi @@ -580,7 +608,9 @@ maybe_setup_valgrind () { } want_trace () { - test "$trace" = t && test "$verbose" = t + test "$trace" = t && { + test "$verbose" = t || test "$verbose_log" = t + } } # This is a separate function because some tests use @@ -595,26 +625,40 @@ test_eval_inner_ () { } test_eval_ () { - # We run this block with stderr redirected to avoid extra cruft - # during a "-x" trace. Once in "set -x" mode, we cannot prevent + # If "-x" tracing is in effect, then we want to avoid polluting stderr + # with non-test commands. But once in "set -x" mode, we cannot prevent # the shell from printing the "set +x" to turn it off (nor the saving # of $? before that). But we can make sure that the output goes to # /dev/null. # - # The test itself is run with stderr put back to &4 (so either to - # /dev/null, or to the original stderr if --verbose was used). + # There are a few subtleties here: + # + # - we have to redirect descriptor 4 in addition to 2, to cover + # BASH_XTRACEFD + # + # - the actual eval has to come before the redirection block (since + # it needs to see descriptor 4 to set up its stderr) + # + # - likewise, any error message we print must be outside the block to + # access descriptor 4 + # + # - checking $? has to come immediately after the eval, but it must + # be _inside_ the block to avoid polluting the "set -x" output + # + + test_eval_inner_ "$@" </dev/null >&3 2>&4 { - test_eval_inner_ "$@" </dev/null >&3 2>&4 test_eval_ret_=$? if want_trace then set +x - if test "$test_eval_ret_" != 0 - then - say_color error >&4 "error: last command exited with \$?=$test_eval_ret_" - fi fi - } 2>/dev/null + } 2>/dev/null 4>&2 + + if test "$test_eval_ret_" != 0 && want_trace + then + say_color error >&4 "error: last command exited with \$?=$test_eval_ret_" + fi return $test_eval_ret_ } @@ -913,16 +957,16 @@ then fi fi -GITPERLLIB="$GIT_BUILD_DIR"/perl/blib/lib:"$GIT_BUILD_DIR"/perl/blib/arch/auto/Git +GITPERLLIB="$GIT_BUILD_DIR"/perl/build/lib export GITPERLLIB test -d "$GIT_BUILD_DIR"/templates/blt || { error "You haven't built things yet, have you?" } -if ! test -x "$GIT_BUILD_DIR"/t/helper/test-chmtime +if ! test -x "$GIT_BUILD_DIR"/t/helper/test-tool then - echo >&2 'You need to build test-chmtime:' - echo >&2 'Run "make t/helper/test-chmtime" in the source (toplevel) directory' + echo >&2 'You need to build test-tool:' + echo >&2 'Run "make t/helper/test-tool" in the source (toplevel) directory' exit 1 fi @@ -1022,6 +1066,8 @@ test -z "$NO_PERL" && test_set_prereq PERL test -z "$NO_PTHREADS" && test_set_prereq PTHREADS test -z "$NO_PYTHON" && test_set_prereq PYTHON test -n "$USE_LIBPCRE1$USE_LIBPCRE2" && test_set_prereq PCRE +test -n "$USE_LIBPCRE1" && test_set_prereq LIBPCRE1 +test -n "$USE_LIBPCRE2" && test_set_prereq LIBPCRE2 test -z "$NO_GETTEXT" && test_set_prereq GETTEXT # Can we rely on git's output in the C locale? @@ -1034,42 +1080,10 @@ else test_set_prereq C_LOCALE_OUTPUT fi -# Use this instead of test_cmp to compare files that contain expected and -# actual output from git commands that can be translated. When running -# under GETTEXT_POISON this pretends that the command produced expected -# results. -test_i18ncmp () { - test -n "$GETTEXT_POISON" || test_cmp "$@" -} - -# Use this instead of "grep expected-string actual" to see if the -# output from a git command that can be translated either contains an -# expected string, or does not contain an unwanted one. When running -# under GETTEXT_POISON this pretends that the command produced expected -# results. -test_i18ngrep () { - if test -n "$GETTEXT_POISON" - then - : # pretend success - elif test "x!" = "x$1" - then - shift - ! grep "$@" - else - grep "$@" - fi -} - test_lazy_prereq PIPE ' # test whether the filesystem supports FIFOs - case $(uname -s) in - CYGWIN*|MINGW*) - false - ;; - *) - rm -f testfifo && mkfifo testfifo - ;; - esac + test_have_prereq !MINGW,!CYGWIN && + rm -f testfifo && mkfifo testfifo ' test_lazy_prereq SYMLINKS ' @@ -1105,6 +1119,10 @@ test_lazy_prereq EXPENSIVE ' test -n "$GIT_TEST_LONG" ' +test_lazy_prereq EXPENSIVE_ON_WINDOWS ' + test_have_prereq EXPENSIVE || test_have_prereq !MINGW,!CYGWIN +' + test_lazy_prereq USR_BIN_TIME ' test -x /usr/bin/time ' @@ -1160,7 +1178,19 @@ run_with_limited_cmdline () { (ulimit -s 128 && "$@") } -test_lazy_prereq CMDLINE_LIMIT 'run_with_limited_cmdline true' +test_lazy_prereq CMDLINE_LIMIT ' + test_have_prereq !MINGW,!CYGWIN && + run_with_limited_cmdline true +' + +run_with_limited_stack () { + (ulimit -s 128 && "$@") +} + +test_lazy_prereq ULIMIT_STACK_SIZE ' + test_have_prereq !MINGW,!CYGWIN && + run_with_limited_stack true +' build_option () { git version --build-options | @@ -1171,5 +1201,9 @@ test_lazy_prereq LONG_IS_64BIT ' test 8 -le "$(build_option sizeof-long)" ' -test_lazy_prereq TIME_IS_64BIT 'test-date is64bit' -test_lazy_prereq TIME_T_IS_64BIT 'test-date time_t-is64bit' +test_lazy_prereq TIME_IS_64BIT 'test-tool date is64bit' +test_lazy_prereq TIME_T_IS_64BIT 'test-tool date time_t-is64bit' + +test_lazy_prereq CURL ' + curl --version +' |