diff options
Diffstat (limited to 't')
135 files changed, 4708 insertions, 728 deletions
@@ -79,6 +79,10 @@ appropriately before running "make". --debug:: This may help the person who is developing a new test. It causes the command defined with test_debug to run. + The "trash" directory (used to store all temporary data + during testing) is not deleted even if there are no + failed tests so that you can inspect its contents after + the test finished. --immediate:: This causes the test to immediately exit upon the first @@ -375,7 +379,7 @@ library for your script to use. - test_expect_success [<prereq>] <message> <script> - Usually takes two strings as parameter, and evaluates the + Usually takes two strings as parameters, and evaluates the <script>. If it yields success, test is considered successful. <message> should state what it is testing. @@ -386,7 +390,7 @@ library for your script to use. 'tree=$(git-write-tree)' If you supply three parameters the first will be taken to be a - prerequisite, see the test_set_prereq and test_have_prereq + prerequisite; see the test_set_prereq and test_have_prereq documentation below: test_expect_success TTY 'git --paginate rev-list uses a pager' \ @@ -442,7 +446,7 @@ library for your script to use. Merges the given rev using the given message. Like test_commit, creates a tag and calls test_tick before committing. - - test_set_prereq SOME_PREREQ + - test_set_prereq <prereq> Set a test prerequisite to be used later with test_have_prereq. The test-lib will set some prerequisites for you, see the @@ -452,7 +456,7 @@ library for your script to use. test_have_prereq directly, or the three argument invocation of test_expect_success and test_expect_failure. - - test_have_prereq SOME PREREQ + - test_have_prereq <prereq> Check if we have a prerequisite previously set with test_set_prereq. The most common use of this directly is to skip @@ -522,12 +526,13 @@ library for your script to use. Check whether a file has the length it is expected to. - - test_path_is_file <file> [<diagnosis>] - test_path_is_dir <dir> [<diagnosis>] + - test_path_is_file <path> [<diagnosis>] + test_path_is_dir <path> [<diagnosis>] test_path_is_missing <path> [<diagnosis>] - Check whether a file/directory exists or doesn't. <diagnosis> will - be displayed if the test fails. + Check if the named path is a file, if the named path is a + directory, or if the named path does not exist, respectively, + and fail otherwise, showing the <diagnosis> text. - test_when_finished <script> diff --git a/t/annotate-tests.sh b/t/annotate-tests.sh index d34208cc27..c56a77d237 100644 --- a/t/annotate-tests.sh +++ b/t/annotate-tests.sh @@ -1,5 +1,5 @@ # This file isn't used as a test script directly, instead it is -# sourced from t8001-annotate.sh and t8001-blame.sh. +# sourced from t8001-annotate.sh and t8002-blame.sh. check_count () { head= @@ -124,3 +124,14 @@ test_expect_success \ test_expect_success \ 'some edit' \ 'check_count A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1' + +test_expect_success \ + 'an obfuscated email added' \ + 'echo "No robots allowed" > file.new && + cat file >> file.new && + mv file.new file && + GIT_AUTHOR_NAME="E" GIT_AUTHOR_EMAIL="E at test dot git" git commit -a -m "norobots"' + +test_expect_success \ + 'obfuscated email parsed' \ + 'check_count A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1' diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index 3f24384371..b8996a373a 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -158,7 +158,6 @@ test_http_push_nonff() { ' test_expect_success 'non-fast-forward push shows help message' ' - grep "To prevent you from losing history, non-fast-forward updates were rejected" \ - output + test_i18ngrep "To prevent you from losing history, non-fast-forward updates were rejected" output ' } diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 8deec75c3a..f4e8f43bae 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -435,7 +435,7 @@ test_expect_success 'update-index D/F conflict' ' test $numpath0 = 1 ' -test_expect_success SYMLINKS 'absolute path works as expected' ' +test_expect_success SYMLINKS 'real path works as expected' ' mkdir first && ln -s ../.git first/.git && mkdir second && @@ -443,14 +443,14 @@ test_expect_success SYMLINKS 'absolute path works as expected' ' mkdir third && dir="$(cd .git; pwd -P)" && dir2=third/../second/other/.git && - test "$dir" = "$(test-path-utils make_absolute_path $dir2)" && + test "$dir" = "$(test-path-utils real_path $dir2)" && file="$dir"/index && - test "$file" = "$(test-path-utils make_absolute_path $dir2/index)" && + test "$file" = "$(test-path-utils real_path $dir2/index)" && basename=blub && - test "$dir/$basename" = "$(cd .git && test-path-utils make_absolute_path "$basename")" && + test "$dir/$basename" = "$(cd .git && test-path-utils real_path "$basename")" && ln -s ../first/file .git/syml && sym="$(cd first; pwd -P)"/file && - test "$sym" = "$(test-path-utils make_absolute_path "$dir2/syml")" + test "$sym" = "$(test-path-utils real_path "$dir2/syml")" ' test_expect_success 'very long name in the index handled sanely' ' diff --git a/t/t0001-init.sh b/t/t0001-init.sh index f684993211..ad66410564 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -47,7 +47,7 @@ test_expect_success 'plain nested in bare' ' test_expect_success 'plain through aliased command, outside any git repo' ' ( - sane_unset GIT_DIR GIT_WORK_TREE GIT_CONFIG_NOGLOBAL && + sane_unset GIT_DIR GIT_WORK_TREE && HOME=$(pwd)/alias-config && export HOME && mkdir alias-config && @@ -190,11 +190,11 @@ test_expect_success 'reinit' ' git init >out1 2>err1 && git init >out2 2>err2 ) && - grep "Initialized empty" again/out1 && - grep "Reinitialized existing" again/out2 && + test_i18ngrep "Initialized empty" again/out1 && + test_i18ngrep "Reinitialized existing" again/out2 && >again/empty && - test_cmp again/empty again/err1 && - test_cmp again/empty again/err2 + test_i18ncmp again/empty again/err1 && + test_i18ncmp again/empty again/err2 ' test_expect_success 'init with --template' ' @@ -231,7 +231,6 @@ test_expect_success 'init with init.templatedir set' ' git config -f "$test_config" init.templatedir "${HOME}/templatedir-source" && mkdir templatedir-set && cd templatedir-set && - sane_unset GIT_CONFIG_NOGLOBAL && sane_unset GIT_TEMPLATE_DIR && NO_SET_GIT_TEMPLATE_DIR=t && export NO_SET_GIT_TEMPLATE_DIR && @@ -243,7 +242,6 @@ test_expect_success 'init with init.templatedir set' ' test_expect_success 'init --bare/--shared overrides system/global config' ' ( test_config="$HOME"/.gitconfig && - sane_unset GIT_CONFIG_NOGLOBAL && git config -f "$test_config" core.bare false && git config -f "$test_config" core.sharedRepository 0640 && mkdir init-bare-shared-override && @@ -258,7 +256,6 @@ test_expect_success 'init --bare/--shared overrides system/global config' ' test_expect_success 'init honors global core.sharedRepository' ' ( test_config="$HOME"/.gitconfig && - sane_unset GIT_CONFIG_NOGLOBAL && git config -f "$test_config" core.sharedRepository 0666 && mkdir shared-honor-global && cd shared-honor-global && @@ -374,4 +371,50 @@ test_expect_success 'init prefers command line to GIT_DIR' ' ! test -d otherdir/refs ' +test_expect_success 'init with separate gitdir' ' + rm -rf newdir && + git init --separate-git-dir realgitdir newdir && + echo "gitdir: `pwd`/realgitdir" >expected && + test_cmp expected newdir/.git && + test -d realgitdir/refs +' + +test_expect_success 're-init to update git link' ' + ( + cd newdir && + git init --separate-git-dir ../surrealgitdir + ) && + echo "gitdir: `pwd`/surrealgitdir" >expected && + test_cmp expected newdir/.git && + test -d surrealgitdir/refs && + ! test -d realgitdir/refs +' + +test_expect_success 're-init to move gitdir' ' + rm -rf newdir realgitdir surrealgitdir && + git init newdir && + ( + cd newdir && + git init --separate-git-dir ../realgitdir + ) && + echo "gitdir: `pwd`/realgitdir" >expected && + test_cmp expected newdir/.git && + test -d realgitdir/refs +' + +test_expect_success SYMLINKS 're-init to move gitdir symlink' ' + rm -rf newdir realgitdir && + git init newdir && + ( + cd newdir && + mv .git here && + ln -s here .git && + git init --separate-git-dir ../realgitdir + ) && + echo "gitdir: `pwd`/realgitdir" >expected && + test_cmp expected newdir/.git && + test -d realgitdir/refs && + ! test -d newdir/here +' + test_done diff --git a/t/t0006-date.sh b/t/t0006-date.sh index 1d4d0a5c7d..f87abb5a06 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -25,6 +25,7 @@ check_show 37500000 '1 year, 2 months ago' check_show 55188000 '1 year, 9 months ago' check_show 630000000 '20 years ago' check_show 31449600 '12 months ago' +check_show 62985600 '2 years ago' check_parse() { echo "$1 -> $2" >expect diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index 10b26e4d8e..8d4938f019 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -7,8 +7,31 @@ test_description='Test run command' . ./test-lib.sh +cat >hello-script <<-EOF + #!$SHELL_PATH + cat hello-script +EOF +>empty + test_expect_success 'start_command reports ENOENT' ' test-run-command start-command-ENOENT ./does-not-exist ' +test_expect_success 'run_command can run a command' ' + cat hello-script >hello.sh && + chmod +x hello.sh && + test-run-command run-command ./hello.sh >actual 2>err && + + test_cmp hello-script actual && + test_cmp empty err +' + +test_expect_success POSIXPERM 'run_command reports EACCES' ' + cat hello-script >hello.sh && + chmod -x hello.sh && + test_must_fail test-run-command run-command ./hello.sh 2>err && + + grep "fatal: cannot exec.*hello.sh" err +' + test_done diff --git a/t/t0080-vcs-svn.sh b/t/t0080-vcs-svn.sh index d3225ada68..99a314b080 100755 --- a/t/t0080-vcs-svn.sh +++ b/t/t0080-vcs-svn.sh @@ -76,60 +76,6 @@ test_expect_success 'obj pool: high-water mark' ' test_cmp expected actual ' -test_expect_success 'line buffer' ' - echo HELLO >expected1 && - printf "%s\n" "" HELLO >expected2 && - echo >expected3 && - printf "%s\n" "" Q | q_to_nul >expected4 && - printf "%s\n" foo "" >expected5 && - printf "%s\n" "" foo >expected6 && - - test-line-buffer <<-\EOF >actual1 && - 5 - HELLO - EOF - - test-line-buffer <<-\EOF >actual2 && - 0 - - 5 - HELLO - EOF - - q_to_nul <<-\EOF | - 1 - Q - EOF - test-line-buffer >actual3 && - - q_to_nul <<-\EOF | - 0 - - 1 - Q - EOF - test-line-buffer >actual4 && - - test-line-buffer <<-\EOF >actual5 && - 5 - foo - EOF - - test-line-buffer <<-\EOF >actual6 && - 0 - - 5 - foo - EOF - - test_cmp expected1 actual1 && - test_cmp expected2 actual2 && - test_cmp expected3 actual3 && - test_cmp expected4 actual4 && - test_cmp expected5 actual5 && - test_cmp expected6 actual6 -' - test_expect_success 'string pool' ' echo a does not equal b >expected.differ && echo a equals a >expected.match && diff --git a/t/t0081-line-buffer.sh b/t/t0081-line-buffer.sh new file mode 100755 index 0000000000..bd83ed371a --- /dev/null +++ b/t/t0081-line-buffer.sh @@ -0,0 +1,90 @@ +#!/bin/sh + +test_description="Test the svn importer's input handling routines. + +These tests provide some simple checks that the line_buffer API +behaves as advertised. + +While at it, check that input of newlines and null bytes are handled +correctly. +" +. ./test-lib.sh + +test_expect_success 'hello world' ' + echo ">HELLO" >expect && + test-line-buffer <<-\EOF >actual && + binary 6 + HELLO + EOF + test_cmp expect actual +' + +test_expect_success '0-length read, send along greeting' ' + echo ">HELLO" >expect && + test-line-buffer <<-\EOF >actual && + binary 0 + copy 6 + HELLO + EOF + test_cmp expect actual +' + +test_expect_success 'read from file descriptor' ' + rm -f input && + echo hello >expect && + echo hello >input && + echo copy 6 | + test-line-buffer "&4" 4<input >actual && + test_cmp expect actual +' + +test_expect_success 'skip, copy null byte' ' + echo Q | q_to_nul >expect && + q_to_nul <<-\EOF | test-line-buffer >actual && + skip 2 + Q + copy 2 + Q + EOF + test_cmp expect actual +' + +test_expect_success 'read null byte' ' + echo ">QhelloQ" | q_to_nul >expect && + q_to_nul <<-\EOF | test-line-buffer >actual && + binary 8 + QhelloQ + EOF + test_cmp expect actual +' + +test_expect_success 'long reads are truncated' ' + echo ">foo" >expect && + test-line-buffer <<-\EOF >actual && + binary 5 + foo + EOF + test_cmp expect actual +' + +test_expect_success 'long copies are truncated' ' + printf "%s\n" ">" foo >expect && + test-line-buffer <<-\EOF >actual && + binary 1 + + copy 5 + foo + EOF + test_cmp expect actual +' + +test_expect_success 'long binary reads are truncated' ' + echo ">foo" >expect && + test-line-buffer <<-\EOF >actual && + binary 5 + foo + EOF + test_cmp expect actual +' + +test_done diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh index dd32432d62..6d52b824b1 100755 --- a/t/t1007-hash-object.sh +++ b/t/t1007-hash-object.sh @@ -188,4 +188,17 @@ for args in "-w --stdin-paths" "--stdin-paths -w"; do pop_repo done +test_expect_success 'corrupt tree' ' + echo abc >malformed-tree + test_must_fail git hash-object -t tree malformed-tree +' + +test_expect_success 'corrupt commit' ' + test_must_fail git hash-object -t commit --stdin </dev/null +' + +test_expect_success 'corrupt tag' ' + test_must_fail git hash-object -t tag --stdin </dev/null +' + test_done diff --git a/t/t1021-rerere-in-workdir.sh b/t/t1021-rerere-in-workdir.sh new file mode 100755 index 0000000000..301e071ff7 --- /dev/null +++ b/t/t1021-rerere-in-workdir.sh @@ -0,0 +1,55 @@ +#!/bin/sh + +test_description='rerere run in a workdir' +. ./test-lib.sh + +test_expect_success SYMLINKS setup ' + git config rerere.enabled true && + >world && + git add world && + test_tick && + git commit -m initial && + + echo hello >world && + test_tick && + git commit -a -m hello && + + git checkout -b side HEAD^ && + echo goodbye >world && + test_tick && + git commit -a -m goodbye && + + git checkout master +' + +test_expect_success SYMLINKS 'rerere in workdir' ' + rm -rf .git/rr-cache && + "$SHELL_PATH" "$TEST_DIRECTORY/../contrib/workdir/git-new-workdir" . work && + ( + cd work && + test_must_fail git merge side && + git rerere status >actual && + echo world >expect && + test_cmp expect actual + ) +' + +# This fails because we don't resolve relative symlink in mkdir_in_gitdir() +# For the purpose of helping contrib/workdir/git-new-workdir users, we do not +# have to support relative symlinks, but it might be nicer to make this work +# with a relative symbolic link someday. +test_expect_failure SYMLINKS 'rerere in workdir (relative)' ' + rm -rf .git/rr-cache && + "$SHELL_PATH" "$TEST_DIRECTORY/../contrib/workdir/git-new-workdir" . krow && + ( + cd krow && + rm -f .git/rr-cache && + ln -s ../.git/rr-cache .git/rr-cache && + test_must_fail git merge side && + git rerere status >actual && + echo world >expect && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t1200-tutorial.sh b/t/t1200-tutorial.sh index bfa2c2190d..5e29e13782 100755 --- a/t/t1200-tutorial.sh +++ b/t/t1200-tutorial.sh @@ -163,8 +163,11 @@ test_expect_success 'git resolve' ' git checkout mybranch && git merge -m "Merge upstream changes." master | sed -e "1s/[0-9a-f]\{7\}/VARIABLE/g" \ - -e "s/^Fast[- ]forward /FASTFORWARD /" >resolve.output && - test_cmp resolve.expect resolve.output + -e "s/^Fast[- ]forward /FASTFORWARD /" >resolve.output +' + +test_expect_success 'git resolve output' ' + test_i18ncmp resolve.expect resolve.output ' cat > show-branch2.expect << EOF diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 53fb8228cf..3db56267ee 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -897,4 +897,11 @@ test_expect_success 'key sanity-checking' ' git config foo."ba =z".bar false ' +test_expect_success 'git -c works with aliases of builtins' ' + git config alias.checkconfig "-c foo.check=bar config foo.check" && + echo bar >expect && + git checkconfig >actual && + test_cmp expect actual +' + test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index ff747f8229..4fd83a667a 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -6,7 +6,7 @@ test_description='Test git update-ref and basic ref logging' . ./test-lib.sh -Z=0000000000000000000000000000000000000000 +Z=$_z40 test_expect_success setup ' diff --git a/t/t1411-reflog-show.sh b/t/t1411-reflog-show.sh index ba25ff354d..caa687b5b4 100755 --- a/t/t1411-reflog-show.sh +++ b/t/t1411-reflog-show.sh @@ -28,6 +28,24 @@ test_expect_success 'oneline reflog format' ' test_cmp expect actual ' +test_expect_success 'reflog default format' ' + git reflog -1 >actual && + test_cmp expect actual +' + +cat >expect <<'EOF' +commit e46513e +Reflog: HEAD@{0} (C O Mitter <committer@example.com>) +Reflog message: commit (initial): one +Author: A U Thor <author@example.com> + + one +EOF +test_expect_success 'override reflog default format' ' + git reflog --format=short -1 >actual && + test_cmp expect actual +' + cat >expect <<'EOF' Reflog: HEAD@{Thu Apr 7 15:13:13 2005 -0700} (C O Mitter <committer@example.com>) Reflog message: commit (initial): one diff --git a/t/t1501-worktree.sh b/t/t1501-worktree.sh index da6252b117..63849836c8 100755 --- a/t/t1501-worktree.sh +++ b/t/t1501-worktree.sh @@ -7,7 +7,6 @@ test_expect_success 'setup' ' EMPTY_TREE=$(git write-tree) && EMPTY_BLOB=$(git hash-object -t blob --stdin </dev/null) && CHANGED_BLOB=$(echo changed | git hash-object -t blob --stdin) && - ZEROES=0000000000000000000000000000000000000000 && EMPTY_BLOB7=$(echo $EMPTY_BLOB | sed "s/\(.......\).*/\1/") && CHANGED_BLOB7=$(echo $CHANGED_BLOB | sed "s/\(.......\).*/\1/") && @@ -239,10 +238,10 @@ test_expect_success '_gently() groks relative GIT_DIR & GIT_WORK_TREE' ' test_expect_success 'diff-index respects work tree under .git dir' ' cat >diff-index-cached.expected <<-EOF && - :000000 100644 $ZEROES $EMPTY_BLOB A sub/dir/tracked + :000000 100644 $_z40 $EMPTY_BLOB A sub/dir/tracked EOF cat >diff-index.expected <<-EOF && - :000000 100644 $ZEROES $ZEROES A sub/dir/tracked + :000000 100644 $_z40 $_z40 A sub/dir/tracked EOF ( @@ -258,7 +257,7 @@ test_expect_success 'diff-index respects work tree under .git dir' ' test_expect_success 'diff-files respects work tree under .git dir' ' cat >diff-files.expected <<-EOF && - :100644 100644 $EMPTY_BLOB $ZEROES M sub/dir/tracked + :100644 100644 $EMPTY_BLOB $_z40 M sub/dir/tracked EOF ( diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 9f8adb1f82..0843a1c13b 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -6,6 +6,16 @@ exec </dev/null . ./test-lib.sh +test_did_you_mean () +{ + sq="'" && + cat >expected <<-EOF && + fatal: Path '$2$3' $4, but not ${5:-$sq$3$sq}. + Did you mean '$1:$2$3'${2:+ aka $sq$1:./$3$sq}? + EOF + test_cmp expected error +} + HASH_file= test_expect_success 'set up basic repo' ' @@ -106,7 +116,7 @@ test_expect_success 'incorrect file in sha1:path' ' grep "fatal: Path '"'"'index-only.txt'"'"' exists on disk, but not in '"'"'HEAD'"'"'." error && (cd subdir && test_must_fail git rev-parse HEAD:file2.txt 2> error && - grep "Did you mean '"'"'HEAD:subdir/file2.txt'"'"'?" error ) + test_did_you_mean HEAD subdir/ file2.txt exists ) ' test_expect_success 'incorrect file in :path and :N:path' ' @@ -115,14 +125,14 @@ test_expect_success 'incorrect file in :path and :N:path' ' test_must_fail git rev-parse :1:nothing.txt 2> error && grep "Path '"'"'nothing.txt'"'"' does not exist (neither on disk nor in the index)." error && test_must_fail git rev-parse :1:file.txt 2> error && - grep "Did you mean '"'"':0:file.txt'"'"'?" error && + test_did_you_mean ":0" "" file.txt "is in the index" "at stage 1" && (cd subdir && test_must_fail git rev-parse :1:file.txt 2> error && - grep "Did you mean '"'"':0:file.txt'"'"'?" error && + test_did_you_mean ":0" "" file.txt "is in the index" "at stage 1" && test_must_fail git rev-parse :file2.txt 2> error && - grep "Did you mean '"'"':0:subdir/file2.txt'"'"'?" error && + test_did_you_mean ":0" subdir/ file2.txt "is in the index" && test_must_fail git rev-parse :2:file2.txt 2> error && - grep "Did you mean '"'"':0:subdir/file2.txt'"'"'?" error) && + test_did_you_mean :0 subdir/ file2.txt "is in the index") && test_must_fail git rev-parse :disk-only.txt 2> error && grep "fatal: Path '"'"'disk-only.txt'"'"' exists on disk, but not in the index." error ' diff --git a/t/t1510-repo-setup.sh b/t/t1510-repo-setup.sh index 15101d5e03..ec50a9ad70 100755 --- a/t/t1510-repo-setup.sh +++ b/t/t1510-repo-setup.sh @@ -57,7 +57,7 @@ test_repo () { export GIT_WORK_TREE fi && rm -f trace && - GIT_TRACE="$(pwd)/trace" git symbolic-ref HEAD >/dev/null && + GIT_TRACE_SETUP="$(pwd)/trace" git symbolic-ref HEAD >/dev/null && grep '^setup: ' trace >result && test_cmp expected result ) diff --git a/t/t2011-checkout-invalid-head.sh b/t/t2011-checkout-invalid-head.sh index 15ebdc26eb..300f8bf25c 100755 --- a/t/t2011-checkout-invalid-head.sh +++ b/t/t2011-checkout-invalid-head.sh @@ -15,7 +15,7 @@ test_expect_success 'checkout should not start branch from a tree' ' ' test_expect_success 'checkout master from invalid HEAD' ' - echo 0000000000000000000000000000000000000000 >.git/HEAD && + echo $_z40 >.git/HEAD && git checkout master -- ' diff --git a/t/t2019-checkout-ambiguous-ref.sh b/t/t2019-checkout-ambiguous-ref.sh index 943541d40d..b99d5192a9 100755 --- a/t/t2019-checkout-ambiguous-ref.sh +++ b/t/t2019-checkout-ambiguous-ref.sh @@ -30,8 +30,8 @@ test_expect_success 'checkout chooses branch over tag' ' ' test_expect_success 'checkout reports switch to branch' ' - grep "Switched to branch" stderr && - ! grep "^HEAD is now at" stderr + test_i18ngrep "Switched to branch" stderr && + test_i18ngrep ! "^HEAD is now at" stderr ' test_expect_success 'checkout vague ref succeeds' ' @@ -52,8 +52,8 @@ test_expect_success VAGUENESS_SUCCESS 'checkout chooses branch over tag' ' ' test_expect_success VAGUENESS_SUCCESS 'checkout reports switch to branch' ' - grep "Switched to branch" stderr && - ! grep "^HEAD is now at" stderr + test_i18ngrep "Switched to branch" stderr && + test_i18ngrep ! "^HEAD is now at" stderr ' test_done diff --git a/t/t2020-checkout-detach.sh b/t/t2020-checkout-detach.sh new file mode 100755 index 0000000000..2366f0f414 --- /dev/null +++ b/t/t2020-checkout-detach.sh @@ -0,0 +1,151 @@ +#!/bin/sh + +test_description='checkout into detached HEAD state' +. ./test-lib.sh + +check_detached () { + test_must_fail git symbolic-ref -q HEAD >/dev/null +} + +check_not_detached () { + git symbolic-ref -q HEAD >/dev/null +} + +ORPHAN_WARNING='you are leaving .* commit.*behind' +check_orphan_warning() { + test_i18ngrep "$ORPHAN_WARNING" "$1" +} +check_no_orphan_warning() { + test_i18ngrep ! "$ORPHAN_WARNING" "$1" +} + +reset () { + git checkout master && + check_not_detached +} + +test_expect_success 'setup' ' + test_commit one && + test_commit two && + test_commit three && git tag -d three && + test_commit four && git tag -d four && + git branch branch && + git tag tag +' + +test_expect_success 'checkout branch does not detach' ' + reset && + git checkout branch && + check_not_detached +' + +test_expect_success 'checkout tag detaches' ' + reset && + git checkout tag && + check_detached +' + +test_expect_success 'checkout branch by full name detaches' ' + reset && + git checkout refs/heads/branch && + check_detached +' + +test_expect_success 'checkout non-ref detaches' ' + reset && + git checkout branch^ && + check_detached +' + +test_expect_success 'checkout ref^0 detaches' ' + reset && + git checkout branch^0 && + check_detached +' + +test_expect_success 'checkout --detach detaches' ' + reset && + git checkout --detach branch && + check_detached +' + +test_expect_success 'checkout --detach without branch name' ' + reset && + git checkout --detach && + check_detached +' + +test_expect_success 'checkout --detach errors out for non-commit' ' + reset && + test_must_fail git checkout --detach one^{tree} && + check_not_detached +' + +test_expect_success 'checkout --detach errors out for extra argument' ' + reset && + git checkout master && + test_must_fail git checkout --detach tag one.t && + check_not_detached +' + +test_expect_success 'checkout --detached and -b are incompatible' ' + reset && + test_must_fail git checkout --detach -b newbranch tag && + check_not_detached +' + +test_expect_success 'checkout --detach moves HEAD' ' + reset && + git checkout one && + git checkout --detach two && + git diff --exit-code HEAD && + git diff --exit-code two +' + +test_expect_success 'checkout warns on orphan commits' ' + reset && + git checkout --detach two && + echo content >orphan && + git add orphan && + git commit -a -m orphan && + git checkout master 2>stderr +' + +test_expect_success 'checkout warns on orphan commits: output' ' + check_orphan_warning stderr +' + +test_expect_success 'checkout does not warn leaving ref tip' ' + reset && + git checkout --detach two && + git checkout master 2>stderr +' + +test_expect_success 'checkout does not warn leaving ref tip' ' + check_no_orphan_warning stderr +' + +test_expect_success 'checkout does not warn leaving reachable commit' ' + reset && + git checkout --detach HEAD^ && + git checkout master 2>stderr +' + +test_expect_success 'checkout does not warn leaving reachable commit' ' + check_no_orphan_warning stderr +' + +cat >expect <<'EOF' +Your branch is behind 'master' by 1 commit, and can be fast-forwarded. +EOF +test_expect_success 'tracking count is accurate after orphan check' ' + reset && + git branch child master^ && + git config branch.child.remote . && + git config branch.child.merge refs/heads/master && + git checkout child^ && + git checkout child >stdout && + test_cmp expect stdout +' + +test_done diff --git a/t/t2200-add-update.sh b/t/t2200-add-update.sh index 0692427cb6..4cdebda6a5 100755 --- a/t/t2200-add-update.sh +++ b/t/t2200-add-update.sh @@ -124,7 +124,7 @@ test_expect_success 'add -n -u should not add but just report' ' after=$(git ls-files -s check top) && test "$before" = "$after" && - test_cmp expect actual + test_i18ncmp expect actual ' @@ -149,31 +149,21 @@ test_expect_success 'add -u resolves unmerged paths' ' echo 3 >path1 && echo 2 >path3 && echo 2 >path5 && - git add -u && - git ls-files -s path1 path2 path3 path4 path5 path6 >actual && - { - echo "100644 $three 0 path1" - echo "100644 $one 1 path3" - echo "100644 $one 1 path4" - echo "100644 $one 3 path5" - echo "100644 $one 3 path6" - } >expect && - test_cmp expect actual && - # Bonus tests. Explicit resolving - git add path3 path5 && + # Explicit resolving by adding removed paths should fail test_must_fail git add path4 && test_must_fail git add path6 && - git rm path4 && - git rm path6 && - git ls-files -s "path?" >actual && + # "add -u" should notice removals no matter what stages + # the index entries are in. + git add -u && + git ls-files -s path1 path2 path3 path4 path5 path6 >actual && { echo "100644 $three 0 path1" echo "100644 $two 0 path3" echo "100644 $two 0 path5" - } >expect - + } >expect && + test_cmp expect actual ' test_expect_success '"add -u non-existent" should fail' ' diff --git a/t/t2201-add-update-typechange.sh b/t/t2201-add-update-typechange.sh index 2e8f702452..954fc51e5b 100755 --- a/t/t2201-add-update-typechange.sh +++ b/t/t2201-add-update-typechange.sh @@ -4,8 +4,6 @@ test_description='more git add -u' . ./test-lib.sh -_z40=0000000000000000000000000000000000000000 - test_expect_success setup ' >xyzzy && _empty=$(git hash-object --stdin <xyzzy) && diff --git a/t/t2204-add-ignored.sh b/t/t2204-add-ignored.sh index 24afdabab7..8340ac2f07 100755 --- a/t/t2204-add-ignored.sh +++ b/t/t2204-add-ignored.sh @@ -31,18 +31,21 @@ do rm -f .git/index && test_must_fail git add "$i" 2>err && git ls-files "$i" >out && - ! test -s out && - grep -e "Use -f if" err && - cat err + ! test -s out + ' + + test_expect_success "complaints for ignored $i output" ' + test_i18ngrep -e "Use -f if" err ' test_expect_success "complaints for ignored $i with unignored file" ' rm -f .git/index && test_must_fail git add "$i" file 2>err && git ls-files "$i" >out && - ! test -s out && - grep -e "Use -f if" err && - cat err + ! test -s out + ' + test_expect_success "complaints for ignored $i with unignored file output" ' + test_i18ngrep -e "Use -f if" err ' done @@ -54,9 +57,14 @@ do cd dir && test_must_fail git add "$i" 2>err && git ls-files "$i" >out && - ! test -s out && - grep -e "Use -f if" err && - cat err + ! test -s out + ) + ' + + test_expect_success "complaints for ignored $i in dir output" ' + ( + cd dir && + test_i18ngrep -e "Use -f if" err ) ' done @@ -69,9 +77,14 @@ do cd sub && test_must_fail git add "$i" 2>err && git ls-files "$i" >out && - ! test -s out && - grep -e "Use -f if" err && - cat err + ! test -s out + ) + ' + + test_expect_success "complaints for ignored $i in sub output" ' + ( + cd sub && + test_i18ngrep -e "Use -f if" err ) ' done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index 34794f8a70..0c02d56952 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -319,13 +319,13 @@ test_expect_success 'fail if the index has unresolved entries' ' test_must_fail git merge "$c5" && test_must_fail git merge "$c5" 2> out && - grep "not possible because you have unmerged files" out && + test_i18ngrep "not possible because you have unmerged files" out && git add -u && test_must_fail git merge "$c5" 2> out && - grep "You have not concluded your merge" out && + test_i18ngrep "You have not concluded your merge" out && rm -f .git/MERGE_HEAD && test_must_fail git merge "$c5" 2> out && - grep "Your local changes to the following files would be overwritten by merge:" out + test_i18ngrep "Your local changes to the following files would be overwritten by merge:" out ' test_expect_success 'merge-recursive remove conflict' ' diff --git a/t/t3032-merge-recursive-options.sh b/t/t3032-merge-recursive-options.sh index 44f5421be4..2b17311cb0 100755 --- a/t/t3032-merge-recursive-options.sh +++ b/t/t3032-merge-recursive-options.sh @@ -110,6 +110,20 @@ test_expect_success '--ignore-space-change makes merge succeed' ' git merge-recursive --ignore-space-change HEAD^ -- HEAD remote ' +test_expect_success 'naive cherry-pick fails' ' + git read-tree --reset -u HEAD && + test_must_fail git cherry-pick --no-commit remote && + git read-tree --reset -u HEAD && + test_must_fail git cherry-pick remote && + test_must_fail git update-index --refresh && + grep "<<<<<<" text.txt +' + +test_expect_success '-Xignore-space-change makes cherry-pick succeed' ' + git read-tree --reset -u HEAD && + git cherry-pick --no-commit -Xignore-space-change remote +' + test_expect_success '--ignore-space-change: our w/s-only change wins' ' q_to_cr <<-\EOF >expected && justice and holiness and is the nurse of his age and theQ diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 78ce09f9d7..9e69c8c926 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -46,7 +46,7 @@ test_expect_success \ 'git branch a/b/c && test -f .git/refs/heads/a/b/c' cat >expect <<EOF -0000000000000000000000000000000000000000 $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master +$_z40 $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master EOF test_expect_success \ 'git branch -l d/e/f should create a branch and a log' \ @@ -206,7 +206,9 @@ test_expect_success 'test deleting branch deletes branch config' \ test_expect_success 'test deleting branch without config' \ 'git branch my7 s && sha1=$(git rev-parse my7 | cut -c 1-7) && - test "$(git branch -d my7 2>&1)" = "Deleted branch my7 (was $sha1)."' + echo "Deleted branch my7 (was $sha1)." >expect && + git branch -d my7 >actual 2>&1 && + test_i18ncmp expect actual' test_expect_success 'test --track without .fetch entries' \ 'git branch --track my8 && @@ -230,7 +232,7 @@ test_expect_success \ # Keep this test last, as it changes the current branch cat >expect <<EOF -0000000000000000000000000000000000000000 $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master +$_z40 $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master EOF test_expect_success \ 'git checkout -b g/h/i -l should create a branch and a log' \ diff --git a/t/t3203-branch-output.sh b/t/t3203-branch-output.sh index 6028748c6c..6b7c118e4f 100755 --- a/t/t3203-branch-output.sh +++ b/t/t3203-branch-output.sh @@ -75,7 +75,7 @@ EOF test_expect_success 'git branch shows detached HEAD properly' ' git checkout HEAD^0 && git branch >actual && - test_cmp expect actual + test_i18ncmp expect actual ' test_done diff --git a/t/t3409-rebase-preserve-merges.sh b/t/t3409-rebase-preserve-merges.sh index 19341e5ca1..08201e2331 100755 --- a/t/t3409-rebase-preserve-merges.sh +++ b/t/t3409-rebase-preserve-merges.sh @@ -27,7 +27,17 @@ export GIT_AUTHOR_EMAIL # \ # B2 <-- origin/topic # -# In both cases, 'topic' is rebased onto 'origin/topic'. +# Clone 3 (no-ff merge): +# +# A1--A2--B3 <-- origin/master +# \ +# B1------M <-- topic +# \ / +# \--A3 <-- topic2 +# \ +# B2 <-- origin/topic +# +# In all cases, 'topic' is rebased onto 'origin/topic'. test_expect_success 'setup for merge-preserving rebase' \ 'echo First > A && @@ -61,6 +71,16 @@ test_expect_success 'setup for merge-preserving rebase' \ git commit -m "Merge origin/master into topic" ) && + git clone ./. clone3 && + ( + cd clone3 && + git checkout -b topic2 origin/topic && + echo Sixth > A && + git commit -a -m "Modify A3" && + git checkout -b topic origin/topic && + git merge --no-ff topic2 + ) && + git checkout topic && echo Fourth >> B && git commit -a -m "Modify B2" @@ -93,4 +113,14 @@ test_expect_success '--continue works after a conflict' ' ) ' +test_expect_success 'rebase -p preserves no-ff merges' ' + ( + cd clone3 && + git fetch && + git rebase -p origin/topic && + test 3 = $(git rev-list --all --pretty=oneline | grep "Modify A" | wc -l) && + test 1 = $(git rev-list --all --pretty=oneline | grep "Merge branch" | wc -l) + ) +' + test_done diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index 043954422c..595d2ff990 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -96,7 +96,7 @@ test_expect_success 'revert forbidden on dirty working tree' ' echo content >extra_file && git add extra_file && test_must_fail git revert HEAD 2>errors && - grep "Your local changes would be overwritten by " errors + test_i18ngrep "Your local changes would be overwritten by " errors ' diff --git a/t/t3503-cherry-pick-root.sh b/t/t3503-cherry-pick-root.sh index b0faa29918..9aefe3a1be 100755 --- a/t/t3503-cherry-pick-root.sh +++ b/t/t3503-cherry-pick-root.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='test cherry-picking a root commit' +test_description='test cherry-picking (and reverting) a root commit' . ./test-lib.sh @@ -23,7 +23,30 @@ test_expect_success setup ' test_expect_success 'cherry-pick a root commit' ' git cherry-pick master && - test first = $(cat file1) + echo first >expect && + test_cmp expect file1 + +' + +test_expect_success 'revert a root commit' ' + + git revert master && + test_path_is_missing file1 + +' + +test_expect_success 'cherry-pick a root commit with an external strategy' ' + + git cherry-pick --strategy=resolve master && + echo first >expect && + test_cmp expect file1 + +' + +test_expect_success 'revert a root commit with an external strategy' ' + + git revert --strategy=resolve master && + test_path_is_missing file1 ' diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh index 607bf25d8f..212ec54aaf 100755 --- a/t/t3507-cherry-pick-conflict.sh +++ b/t/t3507-cherry-pick-conflict.sh @@ -11,6 +11,18 @@ test_description='test cherry-pick and revert with conflicts . ./test-lib.sh +test_cmp_rev () { + git rev-parse --verify "$1" >expect.rev && + git rev-parse --verify "$2" >actual.rev && + test_cmp expect.rev actual.rev +} + +pristine_detach () { + git checkout -f "$1^0" && + git read-tree -u --reset HEAD && + git clean -d -f -f -q -x +} + test_expect_success setup ' echo unrelated >unrelated && @@ -23,13 +35,7 @@ test_expect_success setup ' ' test_expect_success 'failed cherry-pick does not advance HEAD' ' - - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && - - git update-index --refresh && - git diff-index --exit-code HEAD && + pristine_detach initial && head=$(git rev-parse HEAD) && test_must_fail git cherry-pick picked && @@ -39,33 +45,96 @@ test_expect_success 'failed cherry-pick does not advance HEAD' ' ' test_expect_success 'advice from failed cherry-pick' " - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && - - git update-index --refresh && - git diff-index --exit-code HEAD && + pristine_detach initial && picked=\$(git rev-parse --short picked) && cat <<-EOF >expected && error: could not apply \$picked... picked hint: after resolving the conflicts, mark the corrected paths hint: with 'git add <paths>' or 'git rm <paths>' - hint: and commit the result with 'git commit -c \$picked' + hint: and commit the result with 'git commit' EOF test_must_fail git cherry-pick picked 2>actual && - test_cmp expected actual + test_i18ncmp expected actual " -test_expect_success 'failed cherry-pick produces dirty index' ' +test_expect_success 'failed cherry-pick sets CHERRY_PICK_HEAD' ' + pristine_detach initial && + test_must_fail git cherry-pick picked && + test_cmp_rev picked CHERRY_PICK_HEAD +' - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && +test_expect_success 'successful cherry-pick does not set CHERRY_PICK_HEAD' ' + pristine_detach initial && + git cherry-pick base && + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' + +test_expect_success 'cherry-pick --no-commit does not set CHERRY_PICK_HEAD' ' + pristine_detach initial && + git cherry-pick --no-commit base && + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' + +test_expect_success 'GIT_CHERRY_PICK_HELP suppresses CHERRY_PICK_HEAD' ' + pristine_detach initial && + ( + GIT_CHERRY_PICK_HELP="and then do something else" && + export GIT_CHERRY_PICK_HELP && + test_must_fail git cherry-pick picked + ) && + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' + +test_expect_success 'git reset clears CHERRY_PICK_HEAD' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + git reset && + + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' - git update-index --refresh && - git diff-index --exit-code HEAD && +test_expect_success 'failed commit does not clear CHERRY_PICK_HEAD' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + test_must_fail git commit && + + test_cmp_rev picked CHERRY_PICK_HEAD +' + +test_expect_success 'cancelled commit does not clear CHERRY_PICK_HEAD' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + echo resolved >foo && + git add foo && + git update-index --refresh -q && + test_must_fail git diff-index --exit-code HEAD && + ( + GIT_EDITOR=false && + export GIT_EDITOR && + test_must_fail git commit + ) && + + test_cmp_rev picked CHERRY_PICK_HEAD +' + +test_expect_success 'successful commit clears CHERRY_PICK_HEAD' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + echo resolved >foo && + git add foo && + git commit && + + test_must_fail git rev-parse --verify CHERRY_PICK_HEAD +' + +test_expect_success 'failed cherry-pick produces dirty index' ' + pristine_detach initial && test_must_fail git cherry-pick picked && @@ -74,9 +143,7 @@ test_expect_success 'failed cherry-pick produces dirty index' ' ' test_expect_success 'failed cherry-pick registers participants in index' ' - - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && + pristine_detach initial && { git checkout base -- foo && git ls-files --stage foo && @@ -90,10 +157,7 @@ test_expect_success 'failed cherry-pick registers participants in index' ' 2 s/ 0 / 2 / 3 s/ 0 / 3 / " < stages > expected && - git checkout -f initial^0 && - - git update-index --refresh && - git diff-index --exit-code HEAD && + git read-tree -u --reset HEAD && test_must_fail git cherry-pick picked && git ls-files --stage --unmerged > actual && @@ -102,10 +166,7 @@ test_expect_success 'failed cherry-pick registers participants in index' ' ' test_expect_success 'failed cherry-pick describes conflict in work tree' ' - - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && + pristine_detach initial && cat <<-EOF > expected && <<<<<<< HEAD a @@ -114,9 +175,6 @@ test_expect_success 'failed cherry-pick describes conflict in work tree' ' >>>>>>> objid picked EOF - git update-index --refresh && - git diff-index --exit-code HEAD && - test_must_fail git cherry-pick picked && sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && @@ -124,11 +182,8 @@ test_expect_success 'failed cherry-pick describes conflict in work tree' ' ' test_expect_success 'diff3 -m style' ' - + pristine_detach initial && git config merge.conflictstyle diff3 && - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && cat <<-EOF > expected && <<<<<<< HEAD a @@ -139,9 +194,6 @@ test_expect_success 'diff3 -m style' ' >>>>>>> objid picked EOF - git update-index --refresh && - git diff-index --exit-code HEAD && - test_must_fail git cherry-pick picked && sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && @@ -149,10 +201,8 @@ test_expect_success 'diff3 -m style' ' ' test_expect_success 'revert also handles conflicts sanely' ' - git config --unset merge.conflictstyle && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && + pristine_detach initial && cat <<-EOF > expected && <<<<<<< HEAD a @@ -173,10 +223,7 @@ test_expect_success 'revert also handles conflicts sanely' ' 2 s/ 0 / 2 / 3 s/ 0 / 3 / " < stages > expected-stages && - git checkout -f initial^0 && - - git update-index --refresh && - git diff-index --exit-code HEAD && + git read-tree -u --reset HEAD && head=$(git rev-parse HEAD) && test_must_fail git revert picked && @@ -192,10 +239,8 @@ test_expect_success 'revert also handles conflicts sanely' ' ' test_expect_success 'revert conflict, diff3 -m style' ' + pristine_detach initial && git config merge.conflictstyle diff3 && - git checkout -f initial^0 && - git read-tree -u --reset HEAD && - git clean -d -f -f -q -x && cat <<-EOF > expected && <<<<<<< HEAD a @@ -206,9 +251,6 @@ test_expect_success 'revert conflict, diff3 -m style' ' >>>>>>> parent of objid picked EOF - git update-index --refresh && - git diff-index --exit-code HEAD && - test_must_fail git revert picked && sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index cd093bd347..9fd28bcf34 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -240,11 +240,10 @@ test_expect_success 'refresh index before checking if it is up-to-date' ' test_expect_success 'choking "git rm" should not let it die with cruft' ' git reset -q --hard && - H=0000000000000000000000000000000000000000 && i=0 && while test $i -lt 12000 do - echo "100644 $H 0 some-file-$i" + echo "100644 $_z40 0 some-file-$i" i=$(( $i + 1 )) done | git update-index --index-info && git rm -n "some-file-*" | :; diff --git a/t/t3700-add.sh b/t/t3700-add.sh index ec7108358e..575d9508a0 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -268,8 +268,12 @@ test_expect_success 'git add --dry-run of existing changed file' " test_expect_success 'git add --dry-run of non-existing file' " echo ignored-file >>.gitignore && - test_must_fail git add --dry-run track-this ignored-file >actual 2>&1 && - echo \"fatal: pathspec 'ignored-file' did not match any files\" | test_cmp - actual + test_must_fail git add --dry-run track-this ignored-file >actual 2>&1 +" + +test_expect_success 'git add --dry-run of an existing file output' " + echo \"fatal: pathspec 'ignored-file' did not match any files\" >expect && + test_i18ncmp expect actual " cat >expect.err <<\EOF @@ -283,9 +287,12 @@ add 'track-this' EOF test_expect_success 'git add --dry-run --ignore-missing of non-existing file' ' - test_must_fail git add --dry-run --ignore-missing track-this ignored-file >actual.out 2>actual.err && - test_cmp expect.out actual.out && - test_cmp expect.err actual.err + test_must_fail git add --dry-run --ignore-missing track-this ignored-file >actual.out 2>actual.err +' + +test_expect_success 'git add --dry-run --ignore-missing of non-existing file output' ' + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err ' test_done diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index d6327e7c74..9e236f9cc0 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -82,10 +82,9 @@ EOF ' test_expect_success PERL 'setup fake editor' ' - cat >fake_editor.sh <<EOF - EOF + >fake_editor.sh && chmod a+x fake_editor.sh && - test_set_editor "$(pwd)/fake_editor.sh" && + test_set_editor "$(pwd)/fake_editor.sh" ' test_expect_success PERL 'dummy edit works' ' @@ -295,4 +294,40 @@ test_expect_success PERL 'deleting an empty file' ' test_cmp expected diff ' +test_expect_success PERL 'split hunk setup' ' + git reset --hard && + for i in 10 20 30 40 50 60 + do + echo $i + done >test && + git add test && + test_tick && + git commit -m test && + + for i in 10 15 20 21 22 23 24 30 40 50 60 + do + echo $i + done >test +' + +test_expect_success PERL 'split hunk "add -p (edit)"' ' + # Split, say Edit and do nothing. Then: + # + # 1. Broken version results in a patch that does not apply and + # only takes [y/n] (edit again) so the first q is discarded + # and then n attempts to discard the edit. Repeat q enough + # times to get out. + # + # 2. Correct version applies the (not)edited version, and asks + # about the next hunk, against wich we say q and program + # exits. + for a in s e q n q q + do + echo $a + done | + EDITOR=: git add -p && + git diff >actual && + ! grep "^+15" actual +' + test_done diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index f62aaf5816..5c72540642 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -37,14 +37,32 @@ test_expect_success 'parents of stash' ' test_cmp output expect ' -test_expect_success 'apply needs clean working directory' ' - echo 4 > other-file && +test_expect_success 'applying bogus stash does nothing' ' + test_must_fail git stash apply stash@{1} && + echo 1 >expect && + test_cmp expect file +' + +test_expect_success 'apply does not need clean working directory' ' + echo 4 >other-file && git add other-file && - echo 5 > other-file && - test_must_fail git stash apply + echo 5 >other-file && + git stash apply && + echo 3 >expect && + test_cmp expect file +' + +test_expect_success 'apply does not clobber working directory changes' ' + git reset --hard && + echo 4 >file && + test_must_fail git stash apply && + echo 4 >expect && + test_cmp expect file ' test_expect_success 'apply stashed changes' ' + git reset --hard && + echo 5 >other-file && git add other-file && test_tick && git commit -m other-file && @@ -218,6 +236,14 @@ test_expect_success 'stash -k' ' test bar,bar4 = $(cat file),$(cat file2) ' +test_expect_success 'stash --no-keep-index' ' + echo bar33 > file && + echo bar44 > file2 && + git add file2 && + git stash --no-keep-index && + test bar,bar2 = $(cat file),$(cat file2) +' + test_expect_success 'stash --invalid-option' ' echo bar5 > file && echo bar6 > file2 && @@ -537,11 +563,11 @@ test_expect_success 'invalid ref of the form stash@{n}, n >= N' ' echo bar6 > file2 && git add file2 && git stash && - test_must_fail git drop stash@{1} && - test_must_fail git pop stash@{1} && - test_must_fail git apply stash@{1} && - test_must_fail git show stash@{1} && - test_must_fail git branch tmp stash@{1} && + test_must_fail git stash drop stash@{1} && + test_must_fail git stash pop stash@{1} && + test_must_fail git stash apply stash@{1} && + test_must_fail git stash show stash@{1} && + test_must_fail git stash branch tmp stash@{1} && git stash drop ' diff --git a/t/t3904-stash-patch.sh b/t/t3904-stash-patch.sh index 1e7193ac0b..781fd71681 100755 --- a/t/t3904-stash-patch.sh +++ b/t/t3904-stash-patch.sh @@ -48,6 +48,18 @@ test_expect_success PERL 'git stash -p --no-keep-index' ' verify_state bar dummy bar_index ' +test_expect_success PERL 'git stash --no-keep-index -p' ' + set_state dir/foo work index && + set_state bar bar_work bar_index && + (echo n; echo y) | git stash save --no-keep-index -p && + verify_state dir/foo head head && + verify_state bar bar_work dummy && + git reset --hard && + git stash apply --index && + verify_state dir/foo work index && + verify_state bar dummy bar_index +' + test_expect_success PERL 'none of this moved HEAD' ' verify_saved_head ' diff --git a/t/t4001-diff-rename.sh b/t/t4001-diff-rename.sh index 71bac83dd5..844277cfa6 100755 --- a/t/t4001-diff-rename.sh +++ b/t/t4001-diff-rename.sh @@ -71,10 +71,35 @@ test_expect_success 'favour same basenames over different ones' ' git rm path1 && mkdir subdir && git mv another-path subdir/path1 && - git status | grep "renamed: .*path1 -> subdir/path1"' + git status | test_i18ngrep "renamed: .*path1 -> subdir/path1"' -test_expect_success 'favour same basenames even with minor differences' ' +test_expect_success 'favour same basenames even with minor differences' ' git show HEAD:path1 | sed "s/15/16/" > subdir/path1 && - git status | grep "renamed: .*path1 -> subdir/path1"' + git status | test_i18ngrep "renamed: .*path1 -> subdir/path1"' + +test_expect_success 'setup for many rename source candidates' ' + git reset --hard && + for i in 0 1 2 3 4 5 6 7 8 9; + do + for j in 0 1 2 3 4 5 6 7 8 9; + do + echo "$i$j" >"path$i$j" + done + done && + git add "path??" && + test_tick && + git commit -m "hundred" && + (cat path1; echo new) >new-path && + echo old >>path1 && + git add new-path path1 && + git diff -l 4 -C -C --cached --name-status >actual 2>actual.err && + sed -e "s/^\([CM]\)[0-9]* /\1 /" actual >actual.munged && + cat >expect <<-EOF && + C path1 new-path + M path1 + EOF + test_cmp expect actual.munged && + grep warning actual.err +' test_done diff --git a/t/t4002-diff-basic.sh b/t/t4002-diff-basic.sh index 9fb8ca06a8..a5e8b83083 100755 --- a/t/t4002-diff-basic.sh +++ b/t/t4002-diff-basic.sh @@ -126,15 +126,12 @@ cat >.test-recursive-AB <<\EOF :100644 100644 3fdbe17fd013303a2e981e1ca1c6cd6e72789087 7e09d6a3a14bd630913e8c75693cea32157b606d M Z/NM EOF -x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' -x40="$x40$x40$x40$x40$x40$x40$x40$x40" -z40='0000000000000000000000000000000000000000' cmp_diff_files_output () { # diff-files never reports additions. Also it does not fill in the # object ID for the changed files because it wants you to look at the # filesystem. sed <"$2" >.test-tmp \ - -e '/^:000000 /d;s/'$x40'\( [MCRNDU][0-9]*\) /'$z40'\1 /' && + -e '/^:000000 /d;s/'$_x40'\( [MCRNDU][0-9]*\) /'$_z40'\1 /' && test_cmp "$1" .test-tmp } diff --git a/t/t4010-diff-pathspec.sh b/t/t4010-diff-pathspec.sh index 94df7ae53a..fbc8cd8f05 100755 --- a/t/t4010-diff-pathspec.sh +++ b/t/t4010-diff-pathspec.sh @@ -70,4 +70,36 @@ test_expect_success 'diff-tree pathspec' ' test_cmp expected current ' +EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904 + +test_expect_success 'diff-tree with wildcard shows dir also matches' ' + git diff-tree --name-only $EMPTY_TREE $tree -- "f*" >result && + echo file0 >expected && + test_cmp expected result +' + +test_expect_success 'diff-tree -r with wildcard' ' + git diff-tree -r --name-only $EMPTY_TREE $tree -- "*file1" >result && + echo path1/file1 >expected && + test_cmp expected result +' + +test_expect_success 'diff-tree with wildcard shows dir also matches' ' + git diff-tree --name-only $tree $tree2 -- "path1/f*" >result && + echo path1 >expected && + test_cmp expected result +' + +test_expect_success 'diff-tree -r with wildcard from beginning' ' + git diff-tree -r --name-only $tree $tree2 -- "path1/*file1" >result && + echo path1/file1 >expected && + test_cmp expected result +' + +test_expect_success 'diff-tree -r with wildcard' ' + git diff-tree -r --name-only $tree $tree2 -- "path1/f*" >result && + echo path1/file1 >expected && + test_cmp expected result +' + test_done diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 5daa0f2a0c..93a6f20871 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -80,18 +80,31 @@ test_expect_success setup ' git config log.showroot false && git commit --amend && + + GIT_AUTHOR_DATE="2006-06-26 00:06:00 +0000" && + GIT_COMMITTER_DATE="2006-06-26 00:06:00 +0000" && + export GIT_AUTHOR_DATE GIT_COMMITTER_DATE && + git checkout -b rearrange initial && + for i in B A; do echo $i; done >dir/sub && + git add dir/sub && + git commit -m "Rearranged lines in dir/sub" && + git checkout master && + git show-branch ' : <<\EOF ! [initial] Initial * [master] Merge branch 'side' - ! [side] Side ---- - - [master] Merge branch 'side' - *+ [side] Side - * [master^] Second -+*+ [initial] Initial + ! [rearrange] Rearranged lines in dir/sub + ! [side] Side +---- + + [rearrange] Rearranged lines in dir/sub + - [master] Merge branch 'side' + * + [side] Side + * [master^] Third + * [master~2] Second ++*++ [initial] Initial EOF V=`git version | sed -e 's/^git version //' -e 's/\./\\./g'` @@ -287,6 +300,8 @@ diff --no-index --name-status -- dir2 dir diff --no-index dir dir3 diff master master^ side diff --dirstat master~1 master~2 +diff --dirstat initial rearrange +diff --dirstat-by-file initial rearrange EOF test_expect_success 'log -S requires an argument' ' diff --git a/t/t4013/diff.diff_--dirstat-by-file_initial_rearrange b/t/t4013/diff.diff_--dirstat-by-file_initial_rearrange new file mode 100644 index 0000000000..e48e33f678 --- /dev/null +++ b/t/t4013/diff.diff_--dirstat-by-file_initial_rearrange @@ -0,0 +1,3 @@ +$ git diff --dirstat-by-file initial rearrange + 100.0% dir/ +$ diff --git a/t/t4013/diff.diff_--dirstat_initial_rearrange b/t/t4013/diff.diff_--dirstat_initial_rearrange new file mode 100644 index 0000000000..5fb02c13bc --- /dev/null +++ b/t/t4013/diff.diff_--dirstat_initial_rearrange @@ -0,0 +1,3 @@ +$ git diff --dirstat initial rearrange + 100.0% dir/ +$ diff --git a/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^ b/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^ index 1f0f9ad44b..3b4e113012 100644 --- a/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^ +++ b/t/t4013/diff.format-patch_--stdout_--cover-letter_-n_initial..master^ @@ -1,7 +1,7 @@ $ git format-patch --stdout --cover-letter -n initial..master^ From 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 Mon Sep 17 00:00:00 2001 From: C O Mitter <committer@example.com> -Date: Mon, 26 Jun 2006 00:05:00 +0000 +Date: Mon, 26 Jun 2006 00:06:00 +0000 Subject: [DIFFERENT_PREFIX 0/2] *** SUBJECT HERE *** *** BLURB HERE *** diff --git a/t/t4013/diff.log_--decorate=full_--all b/t/t4013/diff.log_--decorate=full_--all index d155e0bab2..44d45257da 100644 --- a/t/t4013/diff.log_--decorate=full_--all +++ b/t/t4013/diff.log_--decorate=full_--all @@ -1,4 +1,10 @@ $ git log --decorate=full --all +commit cd4e72fd96faed3f0ba949dc42967430374e2290 (refs/heads/rearrange) +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + Rearranged lines in dir/sub + commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (HEAD, refs/heads/master) Merge: 9a6d494 c7a2ab9 Author: A U Thor <author@example.com> diff --git a/t/t4013/diff.log_--decorate_--all b/t/t4013/diff.log_--decorate_--all index fd7c3e6439..27d3eabc26 100644 --- a/t/t4013/diff.log_--decorate_--all +++ b/t/t4013/diff.log_--decorate_--all @@ -1,4 +1,10 @@ $ git log --decorate --all +commit cd4e72fd96faed3f0ba949dc42967430374e2290 (rearrange) +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + Rearranged lines in dir/sub + commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (HEAD, master) Merge: 9a6d494 c7a2ab9 Author: A U Thor <author@example.com> diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 9c663677df..4a3bf5ba40 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -616,11 +616,11 @@ echo "fatal: --check does not make sense" > expect.check test_expect_success 'options no longer allowed for format-patch' ' test_must_fail git format-patch --name-only 2> output && - test_cmp expect.name-only output && + test_i18ncmp expect.name-only output && test_must_fail git format-patch --name-status 2> output && - test_cmp expect.name-status output && + test_i18ncmp expect.name-status output && test_must_fail git format-patch --check 2> output && - test_cmp expect.check output' + test_i18ncmp expect.check output' test_expect_success 'format-patch --numstat should produce a patch' ' git format-patch --numstat --stdout master..side > output && @@ -793,4 +793,46 @@ test_expect_success 'format-patch wraps extremely long headers (rfc2047)' ' test_cmp expect subject ' +check_author() { + echo content >>file && + git add file && + GIT_AUTHOR_NAME=$1 git commit -m author-check && + git format-patch --stdout -1 >patch && + grep ^From: patch >actual && + test_cmp expect actual +} + +cat >expect <<'EOF' +From: "Foo B. Bar" <author@example.com> +EOF +test_expect_success 'format-patch quotes dot in headers' ' + check_author "Foo B. Bar" +' + +cat >expect <<'EOF' +From: "Foo \"The Baz\" Bar" <author@example.com> +EOF +test_expect_success 'format-patch quotes double-quote in headers' ' + check_author "Foo \"The Baz\" Bar" +' + +cat >expect <<'EOF' +From: =?UTF-8?q?"F=C3=B6o=20B.=20Bar"?= <author@example.com> +EOF +test_expect_success 'rfc2047-encoded headers also double-quote 822 specials' ' + check_author "Föo B. Bar" +' + +cat >expect <<'EOF' +Subject: header with . in it +EOF +test_expect_success 'subject lines do not have 822 atom-quoting' ' + echo content >>file && + git add file && + git commit -m "header with . in it" && + git format-patch -k -1 --stdout >patch && + grep ^Subject: patch >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4020-diff-external.sh b/t/t4020-diff-external.sh index a7602cf923..083f62d1d6 100755 --- a/t/t4020-diff-external.sh +++ b/t/t4020-diff-external.sh @@ -4,8 +4,6 @@ test_description='external diff interface test' . ./test-lib.sh -_z40=0000000000000000000000000000000000000000 - test_expect_success setup ' test_tick && diff --git a/t/t4027-diff-submodule.sh b/t/t4027-diff-submodule.sh index 241a74d2a2..518bf9524e 100755 --- a/t/t4027-diff-submodule.sh +++ b/t/t4027-diff-submodule.sh @@ -5,7 +5,6 @@ test_description='difference in submodules' . ./test-lib.sh . "$TEST_DIRECTORY"/diff-lib.sh -_z40=0000000000000000000000000000000000000000 test_expect_success setup ' test_tick && test_create_repo sub && diff --git a/t/t4034-diff-words.sh b/t/t4034-diff-words.sh index 8096d8a337..c374aa4c1c 100755 --- a/t/t4034-diff-words.sh +++ b/t/t4034-diff-words.sh @@ -4,331 +4,333 @@ test_description='word diff colors' . ./test-lib.sh -test_expect_success setup ' +cat >pre.simple <<-\EOF + h(4) - git config diff.color.old red && - git config diff.color.new green && - git config diff.color.func magenta + a = b + c +EOF +cat >post.simple <<-\EOF + h(4),hh[44] -' + a = b + c -word_diff () { - test_must_fail git diff --no-index "$@" pre post > output && - test_decode_color <output >output.decrypted && - test_cmp expect output.decrypted -} + aa = a -cat > pre <<\EOF -h(4) - -a = b + c + aeff = aeff * ( aaa ) EOF +cat >expect.letter-runs-are-words <<-\EOF + <BOLD>diff --git a/pre b/post<RESET> + <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>--- a/pre<RESET> + <BOLD>+++ b/post<RESET> + <CYAN>@@ -1,3 +1,7 @@<RESET> + h(4),<GREEN>hh<RESET>[44] -cat > post <<\EOF -h(4),hh[44] - -a = b + c + a = b + c<RESET> -aa = a + <GREEN>aa = a<RESET> -aeff = aeff * ( aaa ) + <GREEN>aeff = aeff * ( aaa<RESET> ) EOF +cat >expect.non-whitespace-is-word <<-\EOF + <BOLD>diff --git a/pre b/post<RESET> + <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>--- a/pre<RESET> + <BOLD>+++ b/post<RESET> + <CYAN>@@ -1,3 +1,7 @@<RESET> + h(4)<GREEN>,hh[44]<RESET> -cat > expect <<\EOF -<BOLD>diff --git a/pre b/post<RESET> -<BOLD>index 330b04f..5ed8eff 100644<RESET> -<BOLD>--- a/pre<RESET> -<BOLD>+++ b/post<RESET> -<CYAN>@@ -1,3 +1,7 @@<RESET> -<RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> - -a = b + c<RESET> + a = b + c<RESET> -<GREEN>aa = a<RESET> + <GREEN>aa = a<RESET> -<GREEN>aeff = aeff * ( aaa )<RESET> + <GREEN>aeff = aeff * ( aaa )<RESET> EOF -test_expect_success 'word diff with runs of whitespace' ' +word_diff () { + test_must_fail git diff --no-index "$@" pre post >output && + test_decode_color <output >output.decrypted && + test_cmp expect output.decrypted +} - word_diff --color-words +test_language_driver () { + lang=$1 + test_expect_success "diff driver '$lang'" ' + cp "$TEST_DIRECTORY/t4034/'"$lang"'/pre" \ + "$TEST_DIRECTORY/t4034/'"$lang"'/post" \ + "$TEST_DIRECTORY/t4034/'"$lang"'/expect" . && + echo "* diff='"$lang"'" >.gitattributes && + word_diff --color-words + ' +} +test_expect_success setup ' + git config diff.color.old red && + git config diff.color.new green && + git config diff.color.func magenta ' -test_expect_success '--word-diff=color' ' - - word_diff --word-diff=color - +test_expect_success 'set up pre and post with runs of whitespace' ' + cp pre.simple pre && + cp post.simple post ' -test_expect_success '--color --word-diff=color' ' - +test_expect_success 'word diff with runs of whitespace' ' + cat >expect <<-\EOF && + <BOLD>diff --git a/pre b/post<RESET> + <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>--- a/pre<RESET> + <BOLD>+++ b/post<RESET> + <CYAN>@@ -1,3 +1,7 @@<RESET> + <RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> + + a = b + c<RESET> + + <GREEN>aa = a<RESET> + + <GREEN>aeff = aeff * ( aaa )<RESET> + EOF + word_diff --color-words && + word_diff --word-diff=color && word_diff --color --word-diff=color - ' -sed 's/#.*$//' > expect <<EOF -diff --git a/pre b/post -index 330b04f..5ed8eff 100644 ---- a/pre -+++ b/post -@@ -1,3 +1,7 @@ --h(4) -+h(4),hh[44] -~ - # significant space -~ - a = b + c -~ -~ -+aa = a -~ -~ -+aeff = aeff * ( aaa ) -~ -EOF - test_expect_success '--word-diff=porcelain' ' - + sed 's/#.*$//' >expect <<-\EOF && + diff --git a/pre b/post + index 330b04f..5ed8eff 100644 + --- a/pre + +++ b/post + @@ -1,3 +1,7 @@ + -h(4) + +h(4),hh[44] + ~ + # significant space + ~ + a = b + c + ~ + ~ + +aa = a + ~ + ~ + +aeff = aeff * ( aaa ) + ~ + EOF word_diff --word-diff=porcelain - ' -cat > expect <<EOF -diff --git a/pre b/post -index 330b04f..5ed8eff 100644 ---- a/pre -+++ b/post -@@ -1,3 +1,7 @@ -[-h(4)-]{+h(4),hh[44]+} - -a = b + c - -{+aa = a+} - -{+aeff = aeff * ( aaa )+} -EOF - test_expect_success '--word-diff=plain' ' + cat >expect <<-\EOF && + diff --git a/pre b/post + index 330b04f..5ed8eff 100644 + --- a/pre + +++ b/post + @@ -1,3 +1,7 @@ + [-h(4)-]{+h(4),hh[44]+} - word_diff --word-diff=plain - -' + a = b + c -test_expect_success '--word-diff=plain --no-color' ' + {+aa = a+} + {+aeff = aeff * ( aaa )+} + EOF + word_diff --word-diff=plain && word_diff --word-diff=plain --no-color - ' -cat > expect <<EOF -<BOLD>diff --git a/pre b/post<RESET> -<BOLD>index 330b04f..5ed8eff 100644<RESET> -<BOLD>--- a/pre<RESET> -<BOLD>+++ b/post<RESET> -<CYAN>@@ -1,3 +1,7 @@<RESET> -<RED>[-h(4)-]<RESET><GREEN>{+h(4),hh[44]+}<RESET> - -a = b + c<RESET> - -<GREEN>{+aa = a+}<RESET> +test_expect_success '--word-diff=plain --color' ' + cat >expect <<-\EOF && + <BOLD>diff --git a/pre b/post<RESET> + <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>--- a/pre<RESET> + <BOLD>+++ b/post<RESET> + <CYAN>@@ -1,3 +1,7 @@<RESET> + <RED>[-h(4)-]<RESET><GREEN>{+h(4),hh[44]+}<RESET> -<GREEN>{+aeff = aeff * ( aaa )+}<RESET> -EOF + a = b + c<RESET> -test_expect_success '--word-diff=plain --color' ' + <GREEN>{+aa = a+}<RESET> + <GREEN>{+aeff = aeff * ( aaa )+}<RESET> + EOF word_diff --word-diff=plain --color - ' -cat > expect <<\EOF -<BOLD>diff --git a/pre b/post<RESET> -<BOLD>index 330b04f..5ed8eff 100644<RESET> -<BOLD>--- a/pre<RESET> -<BOLD>+++ b/post<RESET> -<CYAN>@@ -1 +1 @@<RESET> -<RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> -<CYAN>@@ -3,0 +4,4 @@<RESET> <RESET><MAGENTA>a = b + c<RESET> - -<GREEN>aa = a<RESET> - -<GREEN>aeff = aeff * ( aaa )<RESET> -EOF - test_expect_success 'word diff without context' ' - + cat >expect <<-\EOF && + <BOLD>diff --git a/pre b/post<RESET> + <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>--- a/pre<RESET> + <BOLD>+++ b/post<RESET> + <CYAN>@@ -1 +1 @@<RESET> + <RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET> + <CYAN>@@ -3,0 +4,4 @@<RESET> <RESET><MAGENTA>a = b + c<RESET> + + <GREEN>aa = a<RESET> + + <GREEN>aeff = aeff * ( aaa )<RESET> + EOF word_diff --color-words --unified=0 - ' -cat > expect <<\EOF -<BOLD>diff --git a/pre b/post<RESET> -<BOLD>index 330b04f..5ed8eff 100644<RESET> -<BOLD>--- a/pre<RESET> -<BOLD>+++ b/post<RESET> -<CYAN>@@ -1,3 +1,7 @@<RESET> -h(4),<GREEN>hh<RESET>[44] - -a = b + c<RESET> - -<GREEN>aa = a<RESET> - -<GREEN>aeff = aeff * ( aaa<RESET> ) -EOF -cp expect expect.letter-runs-are-words - test_expect_success 'word diff with a regular expression' ' - + cp expect.letter-runs-are-words expect && word_diff --color-words="[a-z]+" - ' -test_expect_success 'set a diff driver' ' +test_expect_success 'set up a diff driver' ' git config diff.testdriver.wordRegex "[^[:space:]]" && - cat <<EOF > .gitattributes -pre diff=testdriver -post diff=testdriver -EOF + cat <<-\EOF >.gitattributes + pre diff=testdriver + post diff=testdriver + EOF ' test_expect_success 'option overrides .gitattributes' ' - + cp expect.letter-runs-are-words expect && word_diff --color-words="[a-z]+" - ' -cat > expect <<\EOF -<BOLD>diff --git a/pre b/post<RESET> -<BOLD>index 330b04f..5ed8eff 100644<RESET> -<BOLD>--- a/pre<RESET> -<BOLD>+++ b/post<RESET> -<CYAN>@@ -1,3 +1,7 @@<RESET> -h(4)<GREEN>,hh[44]<RESET> - -a = b + c<RESET> - -<GREEN>aa = a<RESET> - -<GREEN>aeff = aeff * ( aaa )<RESET> -EOF -cp expect expect.non-whitespace-is-word - test_expect_success 'use regex supplied by driver' ' - + cp expect.non-whitespace-is-word expect && word_diff --color-words - ' -test_expect_success 'set diff.wordRegex option' ' +test_expect_success 'set up diff.wordRegex option' ' git config diff.wordRegex "[[:alnum:]]+" ' -cp expect.letter-runs-are-words expect - test_expect_success 'command-line overrides config' ' + cp expect.letter-runs-are-words expect && word_diff --color-words="[a-z]+" ' -cat > expect <<\EOF -<BOLD>diff --git a/pre b/post<RESET> -<BOLD>index 330b04f..5ed8eff 100644<RESET> -<BOLD>--- a/pre<RESET> -<BOLD>+++ b/post<RESET> -<CYAN>@@ -1,3 +1,7 @@<RESET> -h(4),<GREEN>{+hh+}<RESET>[44] - -a = b + c<RESET> +test_expect_success 'command-line overrides config: --word-diff-regex' ' + cat >expect <<-\EOF && + <BOLD>diff --git a/pre b/post<RESET> + <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>--- a/pre<RESET> + <BOLD>+++ b/post<RESET> + <CYAN>@@ -1,3 +1,7 @@<RESET> + h(4),<GREEN>{+hh+}<RESET>[44] -<GREEN>{+aa = a+}<RESET> + a = b + c<RESET> -<GREEN>{+aeff = aeff * ( aaa+}<RESET> ) -EOF + <GREEN>{+aa = a+}<RESET> -test_expect_success 'command-line overrides config: --word-diff-regex' ' + <GREEN>{+aeff = aeff * ( aaa+}<RESET> ) + EOF word_diff --color --word-diff-regex="[a-z]+" ' -cp expect.non-whitespace-is-word expect - test_expect_success '.gitattributes override config' ' + cp expect.non-whitespace-is-word expect && word_diff --color-words ' -test_expect_success 'remove diff driver regex' ' - git config --unset diff.testdriver.wordRegex +test_expect_success 'setup: remove diff driver regex' ' + test_might_fail git config --unset diff.testdriver.wordRegex ' -cat > expect <<\EOF -<BOLD>diff --git a/pre b/post<RESET> -<BOLD>index 330b04f..5ed8eff 100644<RESET> -<BOLD>--- a/pre<RESET> -<BOLD>+++ b/post<RESET> -<CYAN>@@ -1,3 +1,7 @@<RESET> -h(4),<GREEN>hh[44<RESET>] - -a = b + c<RESET> +test_expect_success 'use configured regex' ' + cat >expect <<-\EOF && + <BOLD>diff --git a/pre b/post<RESET> + <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>--- a/pre<RESET> + <BOLD>+++ b/post<RESET> + <CYAN>@@ -1,3 +1,7 @@<RESET> + h(4),<GREEN>hh[44<RESET>] -<GREEN>aa = a<RESET> + a = b + c<RESET> -<GREEN>aeff = aeff * ( aaa<RESET> ) -EOF + <GREEN>aa = a<RESET> -test_expect_success 'use configured regex' ' + <GREEN>aeff = aeff * ( aaa<RESET> ) + EOF word_diff --color-words ' -echo 'aaa (aaa)' > pre -echo 'aaa (aaa) aaa' > post - -cat > expect <<\EOF -<BOLD>diff --git a/pre b/post<RESET> -<BOLD>index c29453b..be22f37 100644<RESET> -<BOLD>--- a/pre<RESET> -<BOLD>+++ b/post<RESET> -<CYAN>@@ -1 +1 @@<RESET> -aaa (aaa) <GREEN>aaa<RESET> -EOF - test_expect_success 'test parsing words for newline' ' - + echo "aaa (aaa)" >pre && + echo "aaa (aaa) aaa" >post && + cat >expect <<-\EOF && + <BOLD>diff --git a/pre b/post<RESET> + <BOLD>index c29453b..be22f37 100644<RESET> + <BOLD>--- a/pre<RESET> + <BOLD>+++ b/post<RESET> + <CYAN>@@ -1 +1 @@<RESET> + aaa (aaa) <GREEN>aaa<RESET> + EOF word_diff --color-words="a+" - - ' -echo '(:' > pre -echo '(' > post - -cat > expect <<\EOF -<BOLD>diff --git a/pre b/post<RESET> -<BOLD>index 289cb9d..2d06f37 100644<RESET> -<BOLD>--- a/pre<RESET> -<BOLD>+++ b/post<RESET> -<CYAN>@@ -1 +1 @@<RESET> -(<RED>:<RESET> -EOF - test_expect_success 'test when words are only removed at the end' ' - + echo "(:" >pre && + echo "(" >post && + cat >expect <<-\EOF && + <BOLD>diff --git a/pre b/post<RESET> + <BOLD>index 289cb9d..2d06f37 100644<RESET> + <BOLD>--- a/pre<RESET> + <BOLD>+++ b/post<RESET> + <CYAN>@@ -1 +1 @@<RESET> + (<RED>:<RESET> + EOF word_diff --color-words=. - ' -cat > expect <<\EOF -diff --git a/pre b/post -index 289cb9d..2d06f37 100644 ---- a/pre -+++ b/post -@@ -1 +1 @@ --(: -+( -EOF - test_expect_success '--word-diff=none' ' - + echo "(:" >pre && + echo "(" >post && + cat >expect <<-\EOF && + diff --git a/pre b/post + index 289cb9d..2d06f37 100644 + --- a/pre + +++ b/post + @@ -1 +1 @@ + -(: + +( + EOF word_diff --word-diff=plain --word-diff=none +' +test_language_driver bibtex +test_language_driver cpp +test_language_driver csharp +test_language_driver fortran +test_language_driver html +test_language_driver java +test_language_driver objc +test_language_driver pascal +test_language_driver perl +test_language_driver php +test_language_driver python +test_language_driver ruby +test_language_driver tex + +test_expect_success 'word-diff with diff.sbe' ' + cat >expect <<-\EOF && + diff --git a/pre b/post + index a1a53b5..bc8fe6d 100644 + --- a/pre + +++ b/post + @@ -1,3 +1,3 @@ + a + + [-b-]{+c+} + EOF + cat >pre <<-\EOF && + a + + b + EOF + cat >post <<-\EOF && + a + + c + EOF + test_when_finished "git config --unset diff.suppress-blank-empty" && + git config diff.suppress-blank-empty true && + word_diff --word-diff=plain ' test_done diff --git a/t/t4034/bibtex/expect b/t/t4034/bibtex/expect new file mode 100644 index 0000000000..a157774f9d --- /dev/null +++ b/t/t4034/bibtex/expect @@ -0,0 +1,15 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 95cd55b..ddcba9b 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,9 +1,10 @@<RESET> +@article{aldous1987uie,<RESET> + title={{Ultimate instability of exponential back-off protocol for acknowledgment-based transmission control of random access communication channels}},<RESET> + author={Aldous, <RED>D.<RESET><GREEN>David<RESET>}, + journal={Information Theory, IEEE Transactions on},<RESET> + volume={<RED>33<RESET><GREEN>Bogus.<RESET>}, + number={<RED>2<RESET><GREEN>4<RESET>}, + pages={219--223},<RESET> + year=<GREEN>1987,<RESET> +<GREEN> note={This is in fact a rather funny read since ethernet works well in practice. The<RESET> {<RED>1987<RESET><GREEN>\em pre} reference is the right one, however.<RESET>}<RED>,<RESET> +}<RESET> diff --git a/t/t4034/bibtex/post b/t/t4034/bibtex/post new file mode 100644 index 0000000000..ddcba9b2fc --- /dev/null +++ b/t/t4034/bibtex/post @@ -0,0 +1,10 @@ +@article{aldous1987uie, + title={{Ultimate instability of exponential back-off protocol for acknowledgment-based transmission control of random access communication channels}}, + author={Aldous, David}, + journal={Information Theory, IEEE Transactions on}, + volume={Bogus.}, + number={4}, + pages={219--223}, + year=1987, + note={This is in fact a rather funny read since ethernet works well in practice. The {\em pre} reference is the right one, however.} +} diff --git a/t/t4034/bibtex/pre b/t/t4034/bibtex/pre new file mode 100644 index 0000000000..95cd55bd7b --- /dev/null +++ b/t/t4034/bibtex/pre @@ -0,0 +1,9 @@ +@article{aldous1987uie, + title={{Ultimate instability of exponential back-off protocol for acknowledgment-based transmission control of random access communication channels}}, + author={Aldous, D.}, + journal={Information Theory, IEEE Transactions on}, + volume={33}, + number={2}, + pages={219--223}, + year={1987}, +} diff --git a/t/t4034/cpp/expect b/t/t4034/cpp/expect new file mode 100644 index 0000000000..37d1ea2587 --- /dev/null +++ b/t/t4034/cpp/expect @@ -0,0 +1,36 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 23d5c8a..7e8c026 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,19 +1,19 @@<RESET> +Foo() : x(0<RED>&&1<RESET><GREEN>&42<RESET>) { <GREEN>bar(x);<RESET> } +cout<<"Hello World<RED>!<RESET><GREEN>?<RESET>\n"<<endl; +<GREEN>(<RESET>1<GREEN>) (<RESET>-1e10<GREEN>) (<RESET>0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>' +[<RED>a<RESET><GREEN>x<RESET>] <RED>a<RESET><GREEN>x<RESET>-><RED>b a<RESET><GREEN>y x<RESET>.<RED>b<RESET><GREEN>y<RESET> +!<RED>a<RESET><GREEN>x<RESET> ~<RED>a a<RESET><GREEN>x x<RESET>++ <RED>a<RESET><GREEN>x<RESET>-- <RED>a<RESET><GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>/<RED>b a<RESET><GREEN>y x<RESET>%<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>+<RED>b a<RESET><GREEN>y x<RESET>-<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<<RED>b a<RESET><GREEN>y x<RESET>>><RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<RED>b a<RESET><GREEN>y x<RESET><=<RED>b a<RESET><GREEN>y x<RESET>><RED>b a<RESET><GREEN>y x<RESET>>=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>==<RED>b a<RESET><GREEN>y x<RESET>!=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>^<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>|<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>||<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>?<RED>b<RESET><GREEN>y<RESET>:z +<RED>a<RESET><GREEN>x<RESET>=<RED>b a<RESET><GREEN>y x<RESET>+=<RED>b a<RESET><GREEN>y x<RESET>-=<RED>b a<RESET><GREEN>y x<RESET>*=<RED>b a<RESET><GREEN>y x<RESET>/=<RED>b a<RESET><GREEN>y x<RESET>%=<RED>b a<RESET><GREEN>y x<RESET><<=<RED>b a<RESET><GREEN>y x<RESET>>>=<RED>b a<RESET><GREEN>y x<RESET>&=<RED>b a<RESET><GREEN>y x<RESET>^=<RED>b a<RESET><GREEN>y x<RESET>|=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>,y +<RED>a<RESET><GREEN>x<RESET>::<RED>b<RESET><GREEN>y<RESET> diff --git a/t/t4034/cpp/post b/t/t4034/cpp/post new file mode 100644 index 0000000000..7e8c026cef --- /dev/null +++ b/t/t4034/cpp/post @@ -0,0 +1,19 @@ +Foo() : x(0&42) { bar(x); } +cout<<"Hello World?\n"<<endl; +(1) (-1e10) (0xabcdef) 'y' +[x] x->y x.y +!x ~x x++ x-- x*y x&y +x*y x/y x%y +x+y x-y +x<<y x>>y +x<y x<=y x>y x>=y +x==y x!=y +x&y +x^y +x|y +x&&y +x||y +x?y:z +x=y x+=y x-=y x*=y x/=y x%=y x<<=y x>>=y x&=y x^=y x|=y +x,y +x::y diff --git a/t/t4034/cpp/pre b/t/t4034/cpp/pre new file mode 100644 index 0000000000..23d5c8adf5 --- /dev/null +++ b/t/t4034/cpp/pre @@ -0,0 +1,19 @@ +Foo():x(0&&1){} +cout<<"Hello World!\n"<<endl; +1 -1e10 0xabcdef 'x' +[a] a->b a.b +!a ~a a++ a-- a*b a&b +a*b a/b a%b +a+b a-b +a<<b a>>b +a<b a<=b a>b a>=b +a==b a!=b +a&b +a^b +a|b +a&&b +a||b +a?b:z +a=b a+=b a-=b a*=b a/=b a%=b a<<=b a>>=b a&=b a^=b a|=b +a,y +a::b diff --git a/t/t4034/csharp/expect b/t/t4034/csharp/expect new file mode 100644 index 0000000000..e5d1dd2b3d --- /dev/null +++ b/t/t4034/csharp/expect @@ -0,0 +1,35 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 9106d63..dd5f421 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,18 +1,18 @@<RESET> +Foo() : x(0<RED>&&1<RESET><GREEN>&42<RESET>) { <GREEN>bar(x);<RESET> } +cout<<"Hello World<RED>!<RESET><GREEN>?<RESET>\n"<<endl; +<GREEN>(<RESET>1<GREEN>) (<RESET>-1e10<GREEN>) (<RESET>0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>' +[<RED>a<RESET><GREEN>x<RESET>] <RED>a<RESET><GREEN>x<RESET>-><RED>b a<RESET><GREEN>y x<RESET>.<RED>b<RESET><GREEN>y<RESET> +!<RED>a<RESET><GREEN>x<RESET> ~<RED>a a<RESET><GREEN>x x<RESET>++ <RED>a<RESET><GREEN>x<RESET>-- <RED>a<RESET><GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>/<RED>b a<RESET><GREEN>y x<RESET>%<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>+<RED>b a<RESET><GREEN>y x<RESET>-<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<<RED>b a<RESET><GREEN>y x<RESET>>><RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<RED>b a<RESET><GREEN>y x<RESET><=<RED>b a<RESET><GREEN>y x<RESET>><RED>b a<RESET><GREEN>y x<RESET>>=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>==<RED>b a<RESET><GREEN>y x<RESET>!=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>^<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>|<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>||<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>?<RED>b<RESET><GREEN>y<RESET>:z +<RED>a<RESET><GREEN>x<RESET>=<RED>b a<RESET><GREEN>y x<RESET>+=<RED>b a<RESET><GREEN>y x<RESET>-=<RED>b a<RESET><GREEN>y x<RESET>*=<RED>b a<RESET><GREEN>y x<RESET>/=<RED>b a<RESET><GREEN>y x<RESET>%=<RED>b a<RESET><GREEN>y x<RESET><<=<RED>b a<RESET><GREEN>y x<RESET>>>=<RED>b a<RESET><GREEN>y x<RESET>&=<RED>b a<RESET><GREEN>y x<RESET>^=<RED>b a<RESET><GREEN>y x<RESET>|=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>,y diff --git a/t/t4034/csharp/post b/t/t4034/csharp/post new file mode 100644 index 0000000000..dd5f4218a6 --- /dev/null +++ b/t/t4034/csharp/post @@ -0,0 +1,18 @@ +Foo() : x(0&42) { bar(x); } +cout<<"Hello World?\n"<<endl; +(1) (-1e10) (0xabcdef) 'y' +[x] x->y x.y +!x ~x x++ x-- x*y x&y +x*y x/y x%y +x+y x-y +x<<y x>>y +x<y x<=y x>y x>=y +x==y x!=y +x&y +x^y +x|y +x&&y +x||y +x?y:z +x=y x+=y x-=y x*=y x/=y x%=y x<<=y x>>=y x&=y x^=y x|=y +x,y diff --git a/t/t4034/csharp/pre b/t/t4034/csharp/pre new file mode 100644 index 0000000000..9106d63e87 --- /dev/null +++ b/t/t4034/csharp/pre @@ -0,0 +1,18 @@ +Foo():x(0&&1){} +cout<<"Hello World!\n"<<endl; +1 -1e10 0xabcdef 'x' +[a] a->b a.b +!a ~a a++ a-- a*b a&b +a*b a/b a%b +a+b a-b +a<<b a>>b +a<b a<=b a>b a>=b +a==b a!=b +a&b +a^b +a|b +a&&b +a||b +a?b:z +a=b a+=b a-=b a*=b a/=b a%=b a<<=b a>>=b a&=b a^=b a|=b +a,y diff --git a/t/t4034/fortran/expect b/t/t4034/fortran/expect new file mode 100644 index 0000000000..b233dbd621 --- /dev/null +++ b/t/t4034/fortran/expect @@ -0,0 +1,10 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 87f0d0b..d308da2 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,5 +1,5 @@<RESET> +print *, "Hello World<RED>!<RESET><GREEN>?<RESET>" + +DO10I = 1,10<RESET> +<RED>DO10I<RESET><GREEN>DO 10 I<RESET> = 1,10 +<RED>DO10I<RESET><GREEN>DO 1 0 I<RESET> = 1,10 diff --git a/t/t4034/fortran/post b/t/t4034/fortran/post new file mode 100644 index 0000000000..d308da2ad2 --- /dev/null +++ b/t/t4034/fortran/post @@ -0,0 +1,5 @@ +print *, "Hello World?" + +DO10I = 1,10 +DO 10 I = 1,10 +DO 1 0 I = 1,10 diff --git a/t/t4034/fortran/pre b/t/t4034/fortran/pre new file mode 100644 index 0000000000..87f0d0b031 --- /dev/null +++ b/t/t4034/fortran/pre @@ -0,0 +1,5 @@ +print *, "Hello World!" + +DO10I = 1,10 +DO10I = 1,10 +DO10I = 1,10 diff --git a/t/t4034/html/expect b/t/t4034/html/expect new file mode 100644 index 0000000000..447b49ab6d --- /dev/null +++ b/t/t4034/html/expect @@ -0,0 +1,8 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 8ca4aea..46921e5 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,3 +1,3 @@<RESET> +<tag <GREEN>newattr="newvalue"<RESET>><GREEN>added<RESET> content</tag> +<tag attr=<RED>"value"<RESET><GREEN>"newvalue"<RESET>><RED>content<RESET><GREEN>changed<RESET></tag> +<<RED>tag<RESET><GREEN>newtag<RESET>>content <RED>&entity;<RESET><GREEN>&newentity;<RESET><<RED>/tag<RESET><GREEN>/newtag<RESET>> diff --git a/t/t4034/html/post b/t/t4034/html/post new file mode 100644 index 0000000000..46921e586c --- /dev/null +++ b/t/t4034/html/post @@ -0,0 +1,3 @@ +<tag newattr="newvalue">added content</tag> +<tag attr="newvalue">changed</tag> +<newtag>content &newentity;</newtag> diff --git a/t/t4034/html/pre b/t/t4034/html/pre new file mode 100644 index 0000000000..8ca4aeae83 --- /dev/null +++ b/t/t4034/html/pre @@ -0,0 +1,3 @@ +<tag>content</tag> +<tag attr="value">content</tag> +<tag>content &entity;</tag> diff --git a/t/t4034/java/expect b/t/t4034/java/expect new file mode 100644 index 0000000000..37d1ea2587 --- /dev/null +++ b/t/t4034/java/expect @@ -0,0 +1,36 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 23d5c8a..7e8c026 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,19 +1,19 @@<RESET> +Foo() : x(0<RED>&&1<RESET><GREEN>&42<RESET>) { <GREEN>bar(x);<RESET> } +cout<<"Hello World<RED>!<RESET><GREEN>?<RESET>\n"<<endl; +<GREEN>(<RESET>1<GREEN>) (<RESET>-1e10<GREEN>) (<RESET>0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>' +[<RED>a<RESET><GREEN>x<RESET>] <RED>a<RESET><GREEN>x<RESET>-><RED>b a<RESET><GREEN>y x<RESET>.<RED>b<RESET><GREEN>y<RESET> +!<RED>a<RESET><GREEN>x<RESET> ~<RED>a a<RESET><GREEN>x x<RESET>++ <RED>a<RESET><GREEN>x<RESET>-- <RED>a<RESET><GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>/<RED>b a<RESET><GREEN>y x<RESET>%<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>+<RED>b a<RESET><GREEN>y x<RESET>-<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<<RED>b a<RESET><GREEN>y x<RESET>>><RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<RED>b a<RESET><GREEN>y x<RESET><=<RED>b a<RESET><GREEN>y x<RESET>><RED>b a<RESET><GREEN>y x<RESET>>=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>==<RED>b a<RESET><GREEN>y x<RESET>!=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>^<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>|<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>||<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>?<RED>b<RESET><GREEN>y<RESET>:z +<RED>a<RESET><GREEN>x<RESET>=<RED>b a<RESET><GREEN>y x<RESET>+=<RED>b a<RESET><GREEN>y x<RESET>-=<RED>b a<RESET><GREEN>y x<RESET>*=<RED>b a<RESET><GREEN>y x<RESET>/=<RED>b a<RESET><GREEN>y x<RESET>%=<RED>b a<RESET><GREEN>y x<RESET><<=<RED>b a<RESET><GREEN>y x<RESET>>>=<RED>b a<RESET><GREEN>y x<RESET>&=<RED>b a<RESET><GREEN>y x<RESET>^=<RED>b a<RESET><GREEN>y x<RESET>|=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>,y +<RED>a<RESET><GREEN>x<RESET>::<RED>b<RESET><GREEN>y<RESET> diff --git a/t/t4034/java/post b/t/t4034/java/post new file mode 100644 index 0000000000..7e8c026cef --- /dev/null +++ b/t/t4034/java/post @@ -0,0 +1,19 @@ +Foo() : x(0&42) { bar(x); } +cout<<"Hello World?\n"<<endl; +(1) (-1e10) (0xabcdef) 'y' +[x] x->y x.y +!x ~x x++ x-- x*y x&y +x*y x/y x%y +x+y x-y +x<<y x>>y +x<y x<=y x>y x>=y +x==y x!=y +x&y +x^y +x|y +x&&y +x||y +x?y:z +x=y x+=y x-=y x*=y x/=y x%=y x<<=y x>>=y x&=y x^=y x|=y +x,y +x::y diff --git a/t/t4034/java/pre b/t/t4034/java/pre new file mode 100644 index 0000000000..23d5c8adf5 --- /dev/null +++ b/t/t4034/java/pre @@ -0,0 +1,19 @@ +Foo():x(0&&1){} +cout<<"Hello World!\n"<<endl; +1 -1e10 0xabcdef 'x' +[a] a->b a.b +!a ~a a++ a-- a*b a&b +a*b a/b a%b +a+b a-b +a<<b a>>b +a<b a<=b a>b a>=b +a==b a!=b +a&b +a^b +a|b +a&&b +a||b +a?b:z +a=b a+=b a-=b a*=b a/=b a%=b a<<=b a>>=b a&=b a^=b a|=b +a,y +a::b diff --git a/t/t4034/objc/expect b/t/t4034/objc/expect new file mode 100644 index 0000000000..e5d1dd2b3d --- /dev/null +++ b/t/t4034/objc/expect @@ -0,0 +1,35 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 9106d63..dd5f421 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,18 +1,18 @@<RESET> +Foo() : x(0<RED>&&1<RESET><GREEN>&42<RESET>) { <GREEN>bar(x);<RESET> } +cout<<"Hello World<RED>!<RESET><GREEN>?<RESET>\n"<<endl; +<GREEN>(<RESET>1<GREEN>) (<RESET>-1e10<GREEN>) (<RESET>0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>' +[<RED>a<RESET><GREEN>x<RESET>] <RED>a<RESET><GREEN>x<RESET>-><RED>b a<RESET><GREEN>y x<RESET>.<RED>b<RESET><GREEN>y<RESET> +!<RED>a<RESET><GREEN>x<RESET> ~<RED>a a<RESET><GREEN>x x<RESET>++ <RED>a<RESET><GREEN>x<RESET>-- <RED>a<RESET><GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>/<RED>b a<RESET><GREEN>y x<RESET>%<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>+<RED>b a<RESET><GREEN>y x<RESET>-<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<<RED>b a<RESET><GREEN>y x<RESET>>><RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<RED>b a<RESET><GREEN>y x<RESET><=<RED>b a<RESET><GREEN>y x<RESET>><RED>b a<RESET><GREEN>y x<RESET>>=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>==<RED>b a<RESET><GREEN>y x<RESET>!=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>^<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>|<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>||<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>?<RED>b<RESET><GREEN>y<RESET>:z +<RED>a<RESET><GREEN>x<RESET>=<RED>b a<RESET><GREEN>y x<RESET>+=<RED>b a<RESET><GREEN>y x<RESET>-=<RED>b a<RESET><GREEN>y x<RESET>*=<RED>b a<RESET><GREEN>y x<RESET>/=<RED>b a<RESET><GREEN>y x<RESET>%=<RED>b a<RESET><GREEN>y x<RESET><<=<RED>b a<RESET><GREEN>y x<RESET>>>=<RED>b a<RESET><GREEN>y x<RESET>&=<RED>b a<RESET><GREEN>y x<RESET>^=<RED>b a<RESET><GREEN>y x<RESET>|=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>,y diff --git a/t/t4034/objc/post b/t/t4034/objc/post new file mode 100644 index 0000000000..dd5f4218a6 --- /dev/null +++ b/t/t4034/objc/post @@ -0,0 +1,18 @@ +Foo() : x(0&42) { bar(x); } +cout<<"Hello World?\n"<<endl; +(1) (-1e10) (0xabcdef) 'y' +[x] x->y x.y +!x ~x x++ x-- x*y x&y +x*y x/y x%y +x+y x-y +x<<y x>>y +x<y x<=y x>y x>=y +x==y x!=y +x&y +x^y +x|y +x&&y +x||y +x?y:z +x=y x+=y x-=y x*=y x/=y x%=y x<<=y x>>=y x&=y x^=y x|=y +x,y diff --git a/t/t4034/objc/pre b/t/t4034/objc/pre new file mode 100644 index 0000000000..9106d63e87 --- /dev/null +++ b/t/t4034/objc/pre @@ -0,0 +1,18 @@ +Foo():x(0&&1){} +cout<<"Hello World!\n"<<endl; +1 -1e10 0xabcdef 'x' +[a] a->b a.b +!a ~a a++ a-- a*b a&b +a*b a/b a%b +a+b a-b +a<<b a>>b +a<b a<=b a>b a>=b +a==b a!=b +a&b +a^b +a|b +a&&b +a||b +a?b:z +a=b a+=b a-=b a*=b a/=b a%=b a<<=b a>>=b a&=b a^=b a|=b +a,y diff --git a/t/t4034/pascal/expect b/t/t4034/pascal/expect new file mode 100644 index 0000000000..2ce4230954 --- /dev/null +++ b/t/t4034/pascal/expect @@ -0,0 +1,35 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 077046c..8865e6b 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,18 +1,18 @@<RESET> +writeln("Hello World<RED>!<RESET><GREEN>?<RESET>"); +<GREEN>(<RESET>1<GREEN>) (<RESET>-1e10<GREEN>) (<RESET>0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>' +[<RED>a<RESET><GREEN>x<RESET>] <RED>a<RESET><GREEN>x<RESET>-><RED>b a<RESET><GREEN>y x<RESET>.<RED>b<RESET><GREEN>y<RESET> +!<RED>a<RESET><GREEN>x<RESET> ~<RED>a a<RESET><GREEN>x x<RESET>++ <RED>a<RESET><GREEN>x<RESET>-- <RED>a<RESET><GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>/<RED>b a<RESET><GREEN>y x<RESET>%<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>+<RED>b a<RESET><GREEN>y x<RESET>-<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<<RED>b a<RESET><GREEN>y x<RESET>>><RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<RED>b a<RESET><GREEN>y x<RESET><=<RED>b a<RESET><GREEN>y x<RESET>><RED>b a<RESET><GREEN>y x<RESET>>=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>==<RED>b a<RESET><GREEN>y x<RESET>!=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>^<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>|<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>||<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>?<RED>b<RESET><GREEN>y<RESET>:z +<RED>a<RESET><GREEN>x<RESET>=<RED>b a<RESET><GREEN>y x<RESET>+=<RED>b a<RESET><GREEN>y x<RESET>-=<RED>b a<RESET><GREEN>y x<RESET>*=<RED>b a<RESET><GREEN>y x<RESET>/=<RED>b a<RESET><GREEN>y x<RESET>%=<RED>b a<RESET><GREEN>y x<RESET><<=<RED>b a<RESET><GREEN>y x<RESET>>>=<RED>b a<RESET><GREEN>y x<RESET>&=<RED>b a<RESET><GREEN>y x<RESET>^=<RED>b a<RESET><GREEN>y x<RESET>|=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>,y +<RED>a<RESET><GREEN>x<RESET>::<RED>b<RESET><GREEN>y<RESET> diff --git a/t/t4034/pascal/post b/t/t4034/pascal/post new file mode 100644 index 0000000000..8865e6bddd --- /dev/null +++ b/t/t4034/pascal/post @@ -0,0 +1,18 @@ +writeln("Hello World?"); +(1) (-1e10) (0xabcdef) 'y' +[x] x->y x.y +!x ~x x++ x-- x*y x&y +x*y x/y x%y +x+y x-y +x<<y x>>y +x<y x<=y x>y x>=y +x==y x!=y +x&y +x^y +x|y +x&&y +x||y +x?y:z +x=y x+=y x-=y x*=y x/=y x%=y x<<=y x>>=y x&=y x^=y x|=y +x,y +x::y diff --git a/t/t4034/pascal/pre b/t/t4034/pascal/pre new file mode 100644 index 0000000000..077046c832 --- /dev/null +++ b/t/t4034/pascal/pre @@ -0,0 +1,18 @@ +writeln("Hello World!"); +1 -1e10 0xabcdef 'x' +[a] a->b a.b +!a ~a a++ a-- a*b a&b +a*b a/b a%b +a+b a-b +a<<b a>>b +a<b a<=b a>b a>=b +a==b a!=b +a&b +a^b +a|b +a&&b +a||b +a?b:z +a=b a+=b a-=b a*=b a/=b a%=b a<<=b a>>=b a&=b a^=b a|=b +a,y +a::b diff --git a/t/t4034/perl/expect b/t/t4034/perl/expect new file mode 100644 index 0000000000..a1deb6b6ad --- /dev/null +++ b/t/t4034/perl/expect @@ -0,0 +1,13 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index f6610d3..e8b72ef 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -4,8 +4,8 @@<RESET> + +package Frotz;<RESET> +sub new {<RESET> + my <GREEN>(<RESET>$class<GREEN>, %opts)<RESET> = <RED>shift<RESET><GREEN>@_<RESET>; + return bless { <GREEN>xyzzy => "nitfol", %opts<RESET> }, $class; +}<RESET> + +__END__<RESET> diff --git a/t/t4034/perl/post b/t/t4034/perl/post new file mode 100644 index 0000000000..e8b72ef5dc --- /dev/null +++ b/t/t4034/perl/post @@ -0,0 +1,22 @@ +#!/usr/bin/perl + +use strict; + +package Frotz; +sub new { + my ($class, %opts) = @_; + return bless { xyzzy => "nitfol", %opts }, $class; +} + +__END__ +=head1 NAME + +frotz - Frotz + +=head1 SYNOPSIS + + use frotz; + + $nitfol = new Frotz(); + +=cut diff --git a/t/t4034/perl/pre b/t/t4034/perl/pre new file mode 100644 index 0000000000..f6610d37b8 --- /dev/null +++ b/t/t4034/perl/pre @@ -0,0 +1,22 @@ +#!/usr/bin/perl + +use strict; + +package Frotz; +sub new { + my $class = shift; + return bless {}, $class; +} + +__END__ +=head1 NAME + +frotz - Frotz + +=head1 SYNOPSIS + + use frotz; + + $nitfol = new Frotz(); + +=cut diff --git a/t/t4034/php/expect b/t/t4034/php/expect new file mode 100644 index 0000000000..040440860a --- /dev/null +++ b/t/t4034/php/expect @@ -0,0 +1,35 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index cf6e06b..4420a49 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,18 +1,18 @@<RESET> +<GREEN>(<RESET>$var<GREEN>)<RESET> $ var +<?="Hello World<RED>!<RESET><GREEN>?<RESET>"?> +<GREEN>(<RESET>1<GREEN>) (<RESET>-1e10<GREEN>) (<RESET>0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>' +[<RED>a<RESET><GREEN>x<RESET>] <RED>a<RESET><GREEN>x<RESET>-><RED>b a<RESET><GREEN>y x<RESET>.<RED>b<RESET><GREEN>y<RESET> +!<RED>a<RESET><GREEN>x<RESET> ~<RED>a a<RESET><GREEN>x x<RESET>++ <RED>a<RESET><GREEN>x<RESET>-- <RED>a<RESET><GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>/<RED>b a<RESET><GREEN>y x<RESET>%<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>+<RED>b a<RESET><GREEN>y x<RESET>-<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<<RED>b a<RESET><GREEN>y x<RESET>>><RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<RED>b a<RESET><GREEN>y x<RESET><=<RED>b a<RESET><GREEN>y x<RESET>><RED>b a<RESET><GREEN>y x<RESET>>=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>==<RED>b a<RESET><GREEN>y x<RESET>!=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>^<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>|<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>||<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>?<RED>b<RESET><GREEN>y<RESET>:z +<RED>a<RESET><GREEN>x<RESET>=<RED>b a<RESET><GREEN>y x<RESET>+=<RED>b a<RESET><GREEN>y x<RESET>-=<RED>b a<RESET><GREEN>y x<RESET>*=<RED>b a<RESET><GREEN>y x<RESET>/=<RED>b a<RESET><GREEN>y x<RESET>%=<RED>b a<RESET><GREEN>y x<RESET><<=<RED>b a<RESET><GREEN>y x<RESET>>>=<RED>b a<RESET><GREEN>y x<RESET>&=<RED>b a<RESET><GREEN>y x<RESET>^=<RED>b a<RESET><GREEN>y x<RESET>|=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>,y diff --git a/t/t4034/php/post b/t/t4034/php/post new file mode 100644 index 0000000000..4420a49192 --- /dev/null +++ b/t/t4034/php/post @@ -0,0 +1,18 @@ +($var) $ var +<?="Hello World?"?> +(1) (-1e10) (0xabcdef) 'y' +[x] x->y x.y +!x ~x x++ x-- x*y x&y +x*y x/y x%y +x+y x-y +x<<y x>>y +x<y x<=y x>y x>=y +x==y x!=y +x&y +x^y +x|y +x&&y +x||y +x?y:z +x=y x+=y x-=y x*=y x/=y x%=y x<<=y x>>=y x&=y x^=y x|=y +x,y diff --git a/t/t4034/php/pre b/t/t4034/php/pre new file mode 100644 index 0000000000..cf6e06bc22 --- /dev/null +++ b/t/t4034/php/pre @@ -0,0 +1,18 @@ +$var $var +<?= "Hello World!" ?> +1 -1e10 0xabcdef 'x' +[a] a->b a.b +!a ~a a++ a-- a*b a&b +a*b a/b a%b +a+b a-b +a<<b a>>b +a<b a<=b a>b a>=b +a==b a!=b +a&b +a^b +a|b +a&&b +a||b +a?b:z +a=b a+=b a-=b a*=b a/=b a%=b a<<=b a>>=b a&=b a^=b a|=b +a,y diff --git a/t/t4034/python/expect b/t/t4034/python/expect new file mode 100644 index 0000000000..8abb8a48b4 --- /dev/null +++ b/t/t4034/python/expect @@ -0,0 +1,34 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 438f776..68baf34 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,17 +1,17 @@<RESET> +print<RED>u<RESET> "Hello World<RED>!<RESET><GREEN>?<RESET>\n"<GREEN>; print<RESET> +<GREEN>(<RESET>1<GREEN>) (<RESET>-1e10<GREEN>) (<RESET>0xabcdef<GREEN>) u<RESET>'<RED>x<RESET><GREEN>y<RESET>' +[<RED>a<RESET><GREEN>x<RESET>] <RED>a<RESET><GREEN>x<RESET>-><RED>b a<RESET><GREEN>y x<RESET>.<RED>b<RESET><GREEN>y<RESET> +!<RED>a<RESET><GREEN>x<RESET> ~<RED>a a<RESET><GREEN>x x<RESET>++ <RED>a<RESET><GREEN>x<RESET>-- <RED>a<RESET><GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>/<RED>b a<RESET><GREEN>y x<RESET>%<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>+<RED>b a<RESET><GREEN>y x<RESET>-<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<<RED>b a<RESET><GREEN>y x<RESET>>><RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<RED>b a<RESET><GREEN>y x<RESET><=<RED>b a<RESET><GREEN>y x<RESET>><RED>b a<RESET><GREEN>y x<RESET>>=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>==<RED>b a<RESET><GREEN>y x<RESET>!=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>^<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>|<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>||<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>?<RED>b<RESET><GREEN>y<RESET>:z +<RED>a<RESET><GREEN>x<RESET>=<RED>b a<RESET><GREEN>y x<RESET>+=<RED>b a<RESET><GREEN>y x<RESET>-=<RED>b a<RESET><GREEN>y x<RESET>*=<RED>b a<RESET><GREEN>y x<RESET>/=<RED>b a<RESET><GREEN>y x<RESET>%=<RED>b a<RESET><GREEN>y x<RESET><<=<RED>b a<RESET><GREEN>y x<RESET>>>=<RED>b a<RESET><GREEN>y x<RESET>&=<RED>b a<RESET><GREEN>y x<RESET>^=<RED>b a<RESET><GREEN>y x<RESET>|=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>,y diff --git a/t/t4034/python/post b/t/t4034/python/post new file mode 100644 index 0000000000..68baf34f0e --- /dev/null +++ b/t/t4034/python/post @@ -0,0 +1,17 @@ +print "Hello World?\n"; print +(1) (-1e10) (0xabcdef) u'y' +[x] x->y x.y +!x ~x x++ x-- x*y x&y +x*y x/y x%y +x+y x-y +x<<y x>>y +x<y x<=y x>y x>=y +x==y x!=y +x&y +x^y +x|y +x&&y +x||y +x?y:z +x=y x+=y x-=y x*=y x/=y x%=y x<<=y x>>=y x&=y x^=y x|=y +x,y diff --git a/t/t4034/python/pre b/t/t4034/python/pre new file mode 100644 index 0000000000..438f776875 --- /dev/null +++ b/t/t4034/python/pre @@ -0,0 +1,17 @@ +print u"Hello World!\n" +1 -1e10 0xabcdef 'x' +[a] a->b a.b +!a ~a a++ a-- a*b a&b +a*b a/b a%b +a+b a-b +a<<b a>>b +a<b a<=b a>b a>=b +a==b a!=b +a&b +a^b +a|b +a&&b +a||b +a?b:z +a=b a+=b a-=b a*=b a/=b a%=b a<<=b a>>=b a&=b a^=b a|=b +a,y diff --git a/t/t4034/ruby/expect b/t/t4034/ruby/expect new file mode 100644 index 0000000000..16e1dd5674 --- /dev/null +++ b/t/t4034/ruby/expect @@ -0,0 +1,34 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 30ed9a1..7678f14 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,17 +1,17 @@<RESET> +10.downto(1) {|<RED>x<RESET><GREEN>y<RESET>| puts <RED>x<RESET><GREEN>y<RESET>} +<GREEN>(<RESET>1<GREEN>) (<RESET>-1e10<GREEN>) (<RESET>0xabcdef<GREEN>)<RESET> '<RED>x<RESET><GREEN>y<RESET>' +[<RED>a<RESET><GREEN>x<RESET>] <RED>a<RESET><GREEN>x<RESET>-><RED>b a<RESET><GREEN>y x<RESET>.<RED>b<RESET><GREEN>y<RESET> +!<RED>a<RESET><GREEN>x<RESET> ~<RED>a a<RESET><GREEN>x x<RESET>++ <RED>a<RESET><GREEN>x<RESET>-- <RED>a<RESET><GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>*<RED>b a<RESET><GREEN>y x<RESET>/<RED>b a<RESET><GREEN>y x<RESET>%<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>+<RED>b a<RESET><GREEN>y x<RESET>-<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<<RED>b a<RESET><GREEN>y x<RESET>>><RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET><<RED>b a<RESET><GREEN>y x<RESET><=<RED>b a<RESET><GREEN>y x<RESET>><RED>b a<RESET><GREEN>y x<RESET>>=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>==<RED>b a<RESET><GREEN>y x<RESET>!=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>^<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>|<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>&&<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>||<RED>b<RESET> +<RED>a?b<RESET><GREEN>y<RESET> +<GREEN>x?y<RESET>:z +<RED>a<RESET><GREEN>x<RESET>=<RED>b a<RESET><GREEN>y x<RESET>+=<RED>b a<RESET><GREEN>y x<RESET>-=<RED>b a<RESET><GREEN>y x<RESET>*=<RED>b a<RESET><GREEN>y x<RESET>/=<RED>b a<RESET><GREEN>y x<RESET>%=<RED>b a<RESET><GREEN>y x<RESET><<=<RED>b a<RESET><GREEN>y x<RESET>>>=<RED>b a<RESET><GREEN>y x<RESET>&=<RED>b a<RESET><GREEN>y x<RESET>^=<RED>b a<RESET><GREEN>y x<RESET>|=<RED>b<RESET> +<RED>a<RESET><GREEN>y<RESET> +<GREEN>x<RESET>,y diff --git a/t/t4034/ruby/post b/t/t4034/ruby/post new file mode 100644 index 0000000000..7678f14e14 --- /dev/null +++ b/t/t4034/ruby/post @@ -0,0 +1,17 @@ +10.downto(1) {|y| puts y} +(1) (-1e10) (0xabcdef) 'y' +[x] x->y x.y +!x ~x x++ x-- x*y x&y +x*y x/y x%y +x+y x-y +x<<y x>>y +x<y x<=y x>y x>=y +x==y x!=y +x&y +x^y +x|y +x&&y +x||y +x?y:z +x=y x+=y x-=y x*=y x/=y x%=y x<<=y x>>=y x&=y x^=y x|=y +x,y diff --git a/t/t4034/ruby/pre b/t/t4034/ruby/pre new file mode 100644 index 0000000000..30ed9a1595 --- /dev/null +++ b/t/t4034/ruby/pre @@ -0,0 +1,17 @@ +10.downto(1) {|x| puts x} +1 -1e10 0xabcdef 'x' +[a] a->b a.b +!a ~a a++ a-- a*b a&b +a*b a/b a%b +a+b a-b +a<<b a>>b +a<b a<=b a>b a>=b +a==b a!=b +a&b +a^b +a|b +a&&b +a||b +a?b:z +a=b a+=b a-=b a*=b a/=b a%=b a<<=b a>>=b a&=b a^=b a|=b +a,y diff --git a/t/t4034/tex/expect b/t/t4034/tex/expect new file mode 100644 index 0000000000..604969bcde --- /dev/null +++ b/t/t4034/tex/expect @@ -0,0 +1,9 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index 2b2dfcb..65cab61 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,4 +1,4 @@<RESET> +\section{Something <GREEN>new<RESET>} +<RED>\emph<RESET><GREEN>\textbf<RESET>{Macro style} +{<RED>\em<RESET><GREEN>\bfseries<RESET> State toggle style} +\\[<RED>1em<RESET><GREEN>1cm<RESET>] diff --git a/t/t4034/tex/post b/t/t4034/tex/post new file mode 100644 index 0000000000..65cab61a10 --- /dev/null +++ b/t/t4034/tex/post @@ -0,0 +1,4 @@ +\section{Something new} +\textbf{Macro style} +{\bfseries State toggle style} +\\[1cm] diff --git a/t/t4034/tex/pre b/t/t4034/tex/pre new file mode 100644 index 0000000000..2b2dfcb65c --- /dev/null +++ b/t/t4034/tex/pre @@ -0,0 +1,4 @@ +\section{Something} +\emph{Macro style} +{\em State toggle style} +\\[1em] diff --git a/t/t4046-diff-unmerged.sh b/t/t4046-diff-unmerged.sh new file mode 100755 index 0000000000..25d50a654a --- /dev/null +++ b/t/t4046-diff-unmerged.sh @@ -0,0 +1,87 @@ +#!/bin/sh + +test_description='diff with unmerged index entries' +. ./test-lib.sh + +test_expect_success setup ' + for i in 0 1 2 3 + do + blob=$(echo $i | git hash-object --stdin) && + eval "blob$i=$blob" && + eval "m$i=\"100644 \$blob$i $i\"" || break + done && + paths= && + for b in o x + do + for o in o x + do + for t in o x + do + path="$b$o$t" && + case "$path" in ooo) continue ;; esac + paths="$paths$path " && + p=" $path" && + case "$b" in x) echo "$m1$p" ;; esac && + case "$o" in x) echo "$m2$p" ;; esac && + case "$t" in x) echo "$m3$p" ;; esac || + break + done || break + done || break + done >ls-files-s.expect && + git update-index --index-info <ls-files-s.expect && + git ls-files -s >ls-files-s.actual && + test_cmp ls-files-s.expect ls-files-s.actual +' + +test_expect_success 'diff-files -0' ' + for path in $paths + do + >"$path" && + echo ":000000 100644 $_z40 $_z40 U $path" + done >diff-files-0.expect && + git diff-files -0 >diff-files-0.actual && + test_cmp diff-files-0.expect diff-files-0.actual +' + +test_expect_success 'diff-files -1' ' + for path in $paths + do + >"$path" && + echo ":000000 100644 $_z40 $_z40 U $path" && + case "$path" in + x??) echo ":100644 100644 $blob1 $_z40 M $path" + esac + done >diff-files-1.expect && + git diff-files -1 >diff-files-1.actual && + test_cmp diff-files-1.expect diff-files-1.actual +' + +test_expect_success 'diff-files -2' ' + for path in $paths + do + >"$path" && + echo ":000000 100644 $_z40 $_z40 U $path" && + case "$path" in + ?x?) echo ":100644 100644 $blob2 $_z40 M $path" + esac + done >diff-files-2.expect && + git diff-files -2 >diff-files-2.actual && + test_cmp diff-files-2.expect diff-files-2.actual && + git diff-files >diff-files-default-2.actual && + test_cmp diff-files-2.expect diff-files-default-2.actual +' + +test_expect_success 'diff-files -3' ' + for path in $paths + do + >"$path" && + echo ":000000 100644 $_z40 $_z40 U $path" && + case "$path" in + ??x) echo ":100644 100644 $blob3 $_z40 M $path" + esac + done >diff-files-3.expect && + git diff-files -3 >diff-files-3.actual && + test_cmp diff-files-3.expect diff-files-3.actual +' + +test_done diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index b0b2684a1f..0eace37a03 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -190,7 +190,7 @@ test_expect_success 'pushing explicit refspecs respects forcing' ' +refs/heads/master:refs/heads/master ) && parent_head=$(cd parent && git rev-parse --verify master) && - child_head=$(cd parent && git rev-parse --verify master) && + child_head=$(cd child && git rev-parse --verify master) && test "$parent_head" = "$child_head" ' @@ -210,7 +210,7 @@ test_expect_success 'pushing wildcard refspecs respects forcing' ' "+refs/heads/*:refs/heads/*" ) && parent_head=$(cd parent && git rev-parse --verify master) && - child_head=$(cd parent && git rev-parse --verify master) && + child_head=$(cd child && git rev-parse --verify master) && test "$parent_head" = "$child_head" ' diff --git a/t/t5501-fetch-push-alternates.sh b/t/t5501-fetch-push-alternates.sh new file mode 100755 index 0000000000..b5ced8483a --- /dev/null +++ b/t/t5501-fetch-push-alternates.sh @@ -0,0 +1,66 @@ +#!/bin/sh + +test_description='fetch/push involving alternates' +. ./test-lib.sh + +count_objects () { + loose=0 inpack=0 + eval "$( + git count-objects -v | + sed -n -e 's/^count: \(.*\)/loose=\1/p' \ + -e 's/^in-pack: \(.*\)/inpack=\1/p' + )" && + echo $(( $loose + $inpack )) +} + + +test_expect_success setup ' + ( + git init original && + cd original && + i=0 && + while test $i -le 100 + do + echo "$i" >count && + git add count && + git commit -m "$i" || exit + i=$(($i + 1)) + done + ) && + ( + git clone --reference=original "file:///$(pwd)/original" one && + cd one && + echo Z >count && + git add count && + git commit -m Z && + count_objects >../one.count + ) && + A=$(pwd)/original/.git/objects && + git init receiver && + echo "$A" >receiver/.git/objects/info/alternates && + git init fetcher && + echo "$A" >fetcher/.git/objects/info/alternates +' + +test_expect_success 'pushing into a repository with the same alternate' ' + ( + cd one && + git push ../receiver master:refs/heads/it + ) && + ( + cd receiver && + count_objects >../receiver.count + ) && + test_cmp one.count receiver.count +' + +test_expect_success 'fetching from a repository with the same alternate' ' + ( + cd fetcher && + git fetch ../one master:refs/heads/it && + count_objects >../fetcher.count + ) && + test_cmp one.count fetcher.count +' + +test_done diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index d189add2d0..4e69c907d8 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -304,6 +304,84 @@ test_expect_success 'add --mirror && prune' ' git rev-parse --verify refs/heads/side) ' +test_expect_success 'add --mirror=fetch' ' + mkdir mirror-fetch && + git init mirror-fetch/parent && + (cd mirror-fetch/parent && + test_commit one) && + git init --bare mirror-fetch/child && + (cd mirror-fetch/child && + git remote add --mirror=fetch -f parent ../parent) +' + +test_expect_success 'fetch mirrors act as mirrors during fetch' ' + (cd mirror-fetch/parent && + git branch new && + git branch -m master renamed + ) && + (cd mirror-fetch/child && + git fetch parent && + git rev-parse --verify refs/heads/new && + git rev-parse --verify refs/heads/renamed + ) +' + +test_expect_success 'fetch mirrors can prune' ' + (cd mirror-fetch/child && + git remote prune parent && + test_must_fail git rev-parse --verify refs/heads/master + ) +' + +test_expect_success 'fetch mirrors do not act as mirrors during push' ' + (cd mirror-fetch/parent && + git checkout HEAD^0 + ) && + (cd mirror-fetch/child && + git branch -m renamed renamed2 && + git push parent + ) && + (cd mirror-fetch/parent && + git rev-parse --verify renamed && + test_must_fail git rev-parse --verify refs/heads/renamed2 + ) +' + +test_expect_success 'add --mirror=push' ' + mkdir mirror-push && + git init --bare mirror-push/public && + git init mirror-push/private && + (cd mirror-push/private && + test_commit one && + git remote add --mirror=push public ../public + ) +' + +test_expect_success 'push mirrors act as mirrors during push' ' + (cd mirror-push/private && + git branch new && + git branch -m master renamed && + git push public + ) && + (cd mirror-push/private && + git rev-parse --verify refs/heads/new && + git rev-parse --verify refs/heads/renamed && + test_must_fail git rev-parse --verify refs/heads/master + ) +' + +test_expect_success 'push mirrors do not act as mirrors during fetch' ' + (cd mirror-push/public && + git branch -m renamed renamed2 && + git symbolic-ref HEAD refs/heads/renamed2 + ) && + (cd mirror-push/private && + git fetch public && + git rev-parse --verify refs/heads/renamed && + test_must_fail git rev-parse --verify refs/heads/renamed2 + ) +' + test_expect_success 'add alt && prune' ' (mkdir alttst && cd alttst && diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index a5f458533f..a1fddd4d15 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -67,8 +67,8 @@ test_expect_success "fetch --recurse-submodules recurses into submodules" ' cd downstream && git fetch --recurse-submodules >../actual.out 2>../actual.err ) && - test_cmp expect.out actual.out && - test_cmp expect.err actual.err + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err ' test_expect_success "fetch alone only fetches superproject" ' @@ -96,8 +96,8 @@ test_expect_success "using fetchRecurseSubmodules=true in .gitmodules recurses i git config -f .gitmodules submodule.submodule.fetchRecurseSubmodules true && git fetch >../actual.out 2>../actual.err ) && - test_cmp expect.out actual.out && - test_cmp expect.err actual.err + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err ' test_expect_success "--no-recurse-submodules overrides .gitmodules config" ' @@ -127,8 +127,8 @@ test_expect_success "--recurse-submodules overrides fetchRecurseSubmodules setti git config --unset -f .gitmodules submodule.submodule.fetchRecurseSubmodules && git config --unset submodule.submodule.fetchRecurseSubmodules ) && - test_cmp expect.out actual.out && - test_cmp expect.err actual.err + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err ' test_expect_success "--quiet propagates to submodules" ' @@ -146,14 +146,17 @@ test_expect_success "--dry-run propagates to submodules" ' cd downstream && git fetch --recurse-submodules --dry-run >../actual.out 2>../actual.err ) && - test_cmp expect.out actual.out && - test_cmp expect.err actual.err && + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err +' + +test_expect_success "Without --dry-run propagates to submodules" ' ( cd downstream && git fetch --recurse-submodules >../actual.out 2>../actual.err ) && - test_cmp expect.out actual.out && - test_cmp expect.err actual.err + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err ' test_expect_success "recurseSubmodules=true propagates into submodules" ' @@ -163,8 +166,8 @@ test_expect_success "recurseSubmodules=true propagates into submodules" ' git config fetch.recurseSubmodules true git fetch >../actual.out 2>../actual.err ) && - test_cmp expect.out actual.out && - test_cmp expect.err actual.err + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err ' test_expect_success "--recurse-submodules overrides config in submodule" ' @@ -177,8 +180,8 @@ test_expect_success "--recurse-submodules overrides config in submodule" ' ) && git fetch --recurse-submodules >../actual.out 2>../actual.err ) && - test_cmp expect.out actual.out && - test_cmp expect.err actual.err + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err ' test_expect_success "--no-recurse-submodules overrides config setting" ' @@ -192,4 +195,259 @@ test_expect_success "--no-recurse-submodules overrides config setting" ' ! test -s actual.err ' +test_expect_success "Recursion doesn't happen when no new commits are fetched in the superproject" ' + ( + cd downstream && + ( + cd submodule && + git config --unset fetch.recurseSubmodules + ) && + git config --unset fetch.recurseSubmodules + git fetch >../actual.out 2>../actual.err + ) && + ! test -s actual.out && + ! test -s actual.err +' + +test_expect_success "Recursion stops when no new submodule commits are fetched" ' + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "Fetching submodule submodule" > expect.out.sub && + echo "From $pwd/." > expect.err.sub && + echo " $head1..$head2 master -> origin/master" >> expect.err.sub + head -2 expect.err >> expect.err.sub && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err + ) && + test_i18ncmp expect.err.sub actual.err && + test_i18ncmp expect.out.sub actual.out +' + +test_expect_success "Recursion doesn't happen when new superproject commits don't change any submodules" ' + add_upstream_commit && + head1=$(git rev-parse --short HEAD) && + echo a > file && + git add file && + git commit -m "new file" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.file && + echo " $head1..$head2 master -> origin/master" >> expect.err.file && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err + ) && + ! test -s actual.out && + test_i18ncmp expect.err.file actual.err +' + +test_expect_success "Recursion picks up config in submodule" ' + ( + cd downstream && + git fetch --recurse-submodules && + ( + cd submodule && + git config fetch.recurseSubmodules true + ) + ) && + add_upstream_commit && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.sub && + echo " $head1..$head2 master -> origin/master" >> expect.err.sub && + cat expect.err >> expect.err.sub && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err && + ( + cd submodule && + git config --unset fetch.recurseSubmodules + ) + ) && + test_i18ncmp expect.err.sub actual.err && + test_i18ncmp expect.out actual.out +' + +test_expect_success "Recursion picks up all submodules when necessary" ' + add_upstream_commit && + ( + cd submodule && + ( + cd deepsubmodule && + git fetch && + git checkout -q FETCH_HEAD + ) && + head1=$(git rev-parse --short HEAD^) && + git add deepsubmodule && + git commit -m "new deepsubmodule" + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/submodule" > ../expect.err.sub && + echo " $head1..$head2 master -> origin/master" >> ../expect.err.sub + ) && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.2 && + echo " $head1..$head2 master -> origin/master" >> expect.err.2 && + cat expect.err.sub >> expect.err.2 && + tail -2 expect.err >> expect.err.2 && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err + ) && + test_i18ncmp expect.err.2 actual.err && + test_i18ncmp expect.out actual.out +' + +test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no new commits are fetched in the superproject (and ignores config)" ' + add_upstream_commit && + ( + cd submodule && + ( + cd deepsubmodule && + git fetch && + git checkout -q FETCH_HEAD + ) && + head1=$(git rev-parse --short HEAD^) && + git add deepsubmodule && + git commit -m "new deepsubmodule" + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/submodule" > ../expect.err.sub && + echo " $head1..$head2 master -> origin/master" >> ../expect.err.sub + ) && + ( + cd downstream && + git config fetch.recurseSubmodules true && + git fetch --recurse-submodules=on-demand >../actual.out 2>../actual.err && + git config --unset fetch.recurseSubmodules + ) && + ! test -s actual.out && + ! test -s actual.err +' + +test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necessary (and ignores config)" ' + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + tail -2 expect.err > expect.err.deepsub && + echo "From $pwd/." > expect.err && + echo " $head1..$head2 master -> origin/master" >> expect.err + cat expect.err.sub >> expect.err && + cat expect.err.deepsub >> expect.err && + ( + cd downstream && + git config fetch.recurseSubmodules false && + ( + cd submodule && + git config -f .gitmodules submodule.deepsubmodule.fetchRecursive false + ) && + git fetch --recurse-submodules=on-demand >../actual.out 2>../actual.err && + git config --unset fetch.recurseSubmodules + ( + cd submodule && + git config --unset -f .gitmodules submodule.deepsubmodule.fetchRecursive + ) + ) && + test_i18ncmp expect.out actual.out && + test_i18ncmp expect.err actual.err +' + +test_expect_success "'--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)" ' + add_upstream_commit && + head1=$(git rev-parse --short HEAD) && + echo a >> file && + git add file && + git commit -m "new file" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.file && + echo " $head1..$head2 master -> origin/master" >> expect.err.file && + ( + cd downstream && + git fetch --recurse-submodules=on-demand >../actual.out 2>../actual.err + ) && + ! test -s actual.out && + test_i18ncmp expect.err.file actual.err +' + +test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config" ' + ( + cd downstream && + git fetch --recurse-submodules + ) && + add_upstream_commit && + git config --global fetch.recurseSubmodules false && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.2 && + echo " $head1..$head2 master -> origin/master" >> expect.err.2 + head -2 expect.err >> expect.err.2 && + ( + cd downstream && + git config fetch.recurseSubmodules on-demand && + git fetch >../actual.out 2>../actual.err + ) && + git config --global --unset fetch.recurseSubmodules && + ( + cd downstream && + git config --unset fetch.recurseSubmodules + ) && + test_i18ncmp expect.out.sub actual.out && + test_i18ncmp expect.err.2 actual.err +' + +test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' overrides fetch.recurseSubmodules" ' + ( + cd downstream && + git fetch --recurse-submodules + ) && + add_upstream_commit && + git config fetch.recurseSubmodules false && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "new submodule" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err.2 && + echo " $head1..$head2 master -> origin/master" >> expect.err.2 + head -2 expect.err >> expect.err.2 && + ( + cd downstream && + git config submodule.submodule.fetchRecurseSubmodules on-demand && + git fetch >../actual.out 2>../actual.err + ) && + git config --unset fetch.recurseSubmodules && + ( + cd downstream && + git config --unset submodule.submodule.fetchRecurseSubmodules + ) && + test_i18ncmp expect.out.sub actual.out && + test_i18ncmp expect.err.2 actual.err +' + +test_expect_success "don't fetch submodule when newly recorded commits are already present" ' + ( + cd submodule && + git checkout -q HEAD^^ + ) && + head1=$(git rev-parse --short HEAD) && + git add submodule && + git commit -m "submodule rewound" && + head2=$(git rev-parse --short HEAD) && + echo "From $pwd/." > expect.err && + echo " $head1..$head2 master -> origin/master" >> expect.err && + ( + cd downstream && + git fetch >../actual.out 2>../actual.err + ) && + ! test -s actual.out && + test_i18ncmp expect.err actual.err +' + test_done diff --git a/t/t5541-http-push.sh b/t/t5541-http-push.sh index b0c2a2c3ae..d924056c8a 100755 --- a/t/t5541-http-push.sh +++ b/t/t5541-http-push.sh @@ -128,12 +128,15 @@ test_expect_success 'push fails for non-fast-forward refs unmatched by remote he # push master too; this ensures there is at least one '"'push'"' command to # the remote helper and triggers interaction with the helper. - test_must_fail git push -v origin +master master:retsam >output 2>&1 && + test_must_fail git push -v origin +master master:retsam >output 2>&1' +test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: remote output' ' grep "^ + [a-f0-9]*\.\.\.[a-f0-9]* *master -> master (forced update)$" output && - grep "^ ! \[rejected\] *master -> retsam (non-fast-forward)$" output && + grep "^ ! \[rejected\] *master -> retsam (non-fast-forward)$" output +' - grep "To prevent you from losing history, non-fast-forward updates were rejected" \ +test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: our output' ' + test_i18ngrep "To prevent you from losing history, non-fast-forward updates were rejected" \ output ' diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 987e0c8463..151ea531bd 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -31,7 +31,7 @@ test_expect_success 'clone with excess parameters (2)' ' ' -test_expect_success 'output from clone' ' +test_expect_success C_LOCALE_OUTPUT 'output from clone' ' rm -fr dst && git clone -n "file://$(pwd)/src" dst >output && test $(grep Clon output | wc -l) = 1 @@ -164,7 +164,6 @@ test_expect_success 'clone a void' ' test_expect_success 'clone respects global branch.autosetuprebase' ' ( test_config="$HOME/.gitconfig" && - unset GIT_CONFIG_NOGLOBAL && git config -f "$test_config" branch.autosetuprebase remote && rm -fr dst && git clone src dst && @@ -192,4 +191,20 @@ test_expect_success 'do not respect url-encoding of non-url path' ' git clone x+y xy-regular ' +test_expect_success 'clone separate gitdir' ' + rm -rf dst && + git clone --separate-git-dir realgitdir src dst && + test -d realgitdir/refs +' + +test_expect_success 'clone separate gitdir: output' ' + echo "gitdir: `pwd`/realgitdir" >expected && + test_cmp expected dst/.git +' + +test_expect_success 'clone separate gitdir where target already exists' ' + rm -rf dst && + test_must_fail git clone --separate-git-dir realgitdir src dst +' + test_done diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh new file mode 100755 index 0000000000..b10685af4e --- /dev/null +++ b/t/t6000-rev-list-misc.sh @@ -0,0 +1,51 @@ +#!/bin/sh + +test_description='miscellaneous rev-list tests' + +. ./test-lib.sh + +test_expect_success setup ' + echo content1 >wanted_file && + echo content2 >unwanted_file && + git add wanted_file unwanted_file && + git commit -m one +' + +test_expect_success 'rev-list --objects heeds pathspecs' ' + git rev-list --objects HEAD -- wanted_file >output && + grep wanted_file output && + ! grep unwanted_file output +' + +test_expect_success 'rev-list --objects with pathspecs and deeper paths' ' + mkdir foo && + >foo/file && + git add foo/file && + git commit -m two && + + git rev-list --objects HEAD -- foo >output && + grep foo/file output && + + git rev-list --objects HEAD -- foo/file >output && + grep foo/file output && + ! grep unwanted_file output +' + +test_expect_success 'rev-list --objects with pathspecs and copied files' ' + git checkout --orphan junio-testcase && + git rm -rf . && + + mkdir two && + echo frotz >one && + cp one two/three && + git add one two/three && + test_tick && + git commit -m that && + + ONE=$(git rev-parse HEAD:one) + git rev-list --objects HEAD two >output && + grep "$ONE two/three" output && + ! grep one output +' + +test_done diff --git a/t/t6004-rev-list-path-optim.sh b/t/t6004-rev-list-path-optim.sh index 5dabf1c5e3..3e8c42ee0b 100755 --- a/t/t6004-rev-list-path-optim.sh +++ b/t/t6004-rev-list-path-optim.sh @@ -1,51 +1,96 @@ #!/bin/sh -test_description='git rev-list trivial path optimization test' +test_description='git rev-list trivial path optimization test + + d/z1 + b0 b1 + o------------------------*----o master + / / + o---------o----o----o----o side + a0 c0 c1 a1 c2 + d/f0 d/f1 + d/z0 + +' . ./test-lib.sh test_expect_success setup ' -echo Hello > a && -git add a && -git commit -m "Initial commit" a && -initial=$(git rev-parse --verify HEAD) + echo Hello >a && + mkdir d && + echo World >d/f && + echo World >d/z && + git add a d && + test_tick && + git commit -m "Initial commit" && + git rev-parse --verify HEAD && + git tag initial ' test_expect_success path-optimization ' - commit=$(echo "Unchanged tree" | git commit-tree "HEAD^{tree}" -p HEAD) && - test $(git rev-list $commit | wc -l) = 2 && - test $(git rev-list $commit -- . | wc -l) = 1 + test_tick && + commit=$(echo "Unchanged tree" | git commit-tree "HEAD^{tree}" -p HEAD) && + test $(git rev-list $commit | wc -l) = 2 && + test $(git rev-list $commit -- . | wc -l) = 1 ' test_expect_success 'further setup' ' git checkout -b side && echo Irrelevant >c && - git add c && + echo Irrelevant >d/f && + git add c d/f && + test_tick && git commit -m "Side makes an irrelevant commit" && + git tag side_c0 && echo "More Irrelevancy" >c && git add c && + test_tick && git commit -m "Side makes another irrelevant commit" && echo Bye >a && git add a && + test_tick && git commit -m "Side touches a" && - side=$(git rev-parse --verify HEAD) && + git tag side_a1 && echo "Yet more Irrelevancy" >c && git add c && + test_tick && git commit -m "Side makes yet another irrelevant commit" && git checkout master && echo Another >b && - git add b && + echo Munged >d/z && + git add b d/z && + test_tick && git commit -m "Master touches b" && + git tag master_b0 && git merge side && echo Touched >b && git add b && + test_tick && git commit -m "Master touches b again" ' test_expect_success 'path optimization 2' ' - ( echo "$side"; echo "$initial" ) >expected && + git rev-parse side_a1 initial >expected && git rev-list HEAD -- a >actual && test_cmp expected actual ' +test_expect_success 'pathspec with leading path' ' + git rev-parse master^ master_b0 side_c0 initial >expected && + git rev-list HEAD -- d >actual && + test_cmp expected actual +' + +test_expect_success 'pathspec with glob (1)' ' + git rev-parse master^ master_b0 side_c0 initial >expected && + git rev-list HEAD -- "d/*" >actual && + test_cmp expected actual +' + +test_expect_success 'pathspec with glob (2)' ' + git rev-parse side_c0 initial >expected && + git rev-list HEAD -- "d/[a-m]*" >actual && + test_cmp expected actual +' + test_done diff --git a/t/t6007-rev-list-cherry-pick-file.sh b/t/t6007-rev-list-cherry-pick-file.sh index b565638e92..cacf3de6c9 100755 --- a/t/t6007-rev-list-cherry-pick-file.sh +++ b/t/t6007-rev-list-cherry-pick-file.sh @@ -4,13 +4,14 @@ test_description='test git rev-list --cherry-pick -- file' . ./test-lib.sh -# A---B +# A---B---D---F # \ # \ -# C +# C---E # # B changes a file foo.c, adding a line of text. C changes foo.c as # well as bar.c, but the change in foo.c was identical to change B. +# D and C change bar in the same way, E and F differently. test_expect_success setup ' echo Hallo > foo && @@ -25,11 +26,26 @@ test_expect_success setup ' test_tick && git commit -m "C" && git tag C && + echo Dello > bar && + git add bar && + test_tick && + git commit -m "E" && + git tag E && git checkout master && git checkout branch foo && test_tick && git commit -m "B" && - git tag B + git tag B && + echo Cello > bar && + git add bar && + test_tick && + git commit -m "D" && + git tag D && + echo Nello > bar && + git add bar && + test_tick && + git commit -m "F" && + git tag F ' cat >expect <<EOF @@ -53,8 +69,92 @@ test_expect_success '--cherry-pick foo comes up empty' ' test -z "$(git rev-list --left-right --cherry-pick B...C -- foo)" ' +cat >expect <<EOF +>tags/C +EOF + test_expect_success '--cherry-pick bar does not come up empty' ' - ! test -z "$(git rev-list --left-right --cherry-pick B...C -- bar)" + git rev-list --left-right --cherry-pick B...C -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +test_expect_success 'bar does not come up empty' ' + git rev-list --left-right B...C -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF +<tags/F +>tags/E +EOF + +test_expect_success '--cherry-pick bar does not come up empty (II)' ' + git rev-list --left-right --cherry-pick F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF ++tags/F +=tags/D ++tags/E +=tags/C +EOF + +test_expect_success '--cherry-mark' ' + git rev-list --cherry-mark F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF +<tags/F +=tags/D +>tags/E +=tags/C +EOF + +test_expect_success '--cherry-mark --left-right' ' + git rev-list --cherry-mark --left-right F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF +tags/E +EOF + +test_expect_success '--cherry-pick --right-only' ' + git rev-list --cherry-pick --right-only F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +test_expect_success '--cherry-pick --left-only' ' + git rev-list --cherry-pick --left-only E...F -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect +' + +cat >expect <<EOF ++tags/E +=tags/C +EOF + +test_expect_success '--cherry' ' + git rev-list --cherry F...E -- bar > actual && + git name-rev --stdin --name-only --refs="*tags/*" \ + < actual > actual.named && + test_cmp actual.named expect ' test_expect_success '--cherry-pick with independent, but identical branches' ' @@ -75,11 +175,8 @@ cat >expect <<EOF 1 2 EOF -# Insert an extra commit to break the symmetry test_expect_success '--count --left-right' ' - git checkout branch && - test_commit D && - git rev-list --count --left-right B...D > actual && + git rev-list --count --left-right C...D > actual && test_cmp expect actual ' diff --git a/t/t6009-rev-list-parent.sh b/t/t6009-rev-list-parent.sh index 52f7b277ce..30507407ff 100755 --- a/t/t6009-rev-list-parent.sh +++ b/t/t6009-rev-list-parent.sh @@ -1,14 +1,15 @@ #!/bin/sh -test_description='properly cull all ancestors' +test_description='ancestor culling and limiting by parent number' . ./test-lib.sh -commit () { - test_tick && - echo $1 >file && - git commit -a -m $1 && - git tag $1 +check_revlist () { + rev_list_args="$1" && + shift && + git rev-parse "$@" >expect && + git rev-list $rev_list_args --all >actual && + test_cmp expect actual } test_expect_success setup ' @@ -16,13 +17,13 @@ test_expect_success setup ' touch file && git add file && - commit one && + test_commit one && test_tick=$(($test_tick - 2400)) && - commit two && - commit three && - commit four && + test_commit two && + test_commit three && + test_commit four && git log --pretty=oneline --abbrev-commit ' @@ -35,4 +36,101 @@ test_expect_success 'one is ancestor of others and should not be shown' ' ' +test_expect_success 'setup roots, merges and octopuses' ' + + git checkout --orphan newroot && + test_commit five && + git checkout -b sidebranch two && + test_commit six && + git checkout -b anotherbranch three && + test_commit seven && + git checkout -b yetanotherbranch four && + test_commit eight && + git checkout master && + test_merge normalmerge newroot && + test_tick && + git merge -m tripus sidebranch anotherbranch && + git tag tripus && + git checkout -b tetrabranch normalmerge && + test_tick && + git merge -m tetrapus sidebranch anotherbranch yetanotherbranch && + git tag tetrapus && + git checkout master +' + +test_expect_success 'rev-list roots' ' + + check_revlist "--max-parents=0" one five +' + +test_expect_success 'rev-list no merges' ' + + check_revlist "--max-parents=1" one eight seven six five four three two && + check_revlist "--no-merges" one eight seven six five four three two +' + +test_expect_success 'rev-list no octopuses' ' + + check_revlist "--max-parents=2" one normalmerge eight seven six five four three two +' + +test_expect_success 'rev-list no roots' ' + + check_revlist "--min-parents=1" tetrapus tripus normalmerge eight seven six four three two +' + +test_expect_success 'rev-list merges' ' + + check_revlist "--min-parents=2" tetrapus tripus normalmerge && + check_revlist "--merges" tetrapus tripus normalmerge +' + +test_expect_success 'rev-list octopus' ' + + check_revlist "--min-parents=3" tetrapus tripus +' + +test_expect_success 'rev-list ordinary commits' ' + + check_revlist "--min-parents=1 --max-parents=1" eight seven six four three two +' + +test_expect_success 'rev-list --merges --no-merges yields empty set' ' + + check_revlist "--min-parents=2 --no-merges" && + check_revlist "--merges --no-merges" && + check_revlist "--no-merges --merges" +' + +test_expect_success 'rev-list override and infinities' ' + + check_revlist "--min-parents=2 --max-parents=1 --max-parents=3" tripus normalmerge && + check_revlist "--min-parents=1 --min-parents=2 --max-parents=7" tetrapus tripus normalmerge && + check_revlist "--min-parents=2 --max-parents=8" tetrapus tripus normalmerge && + check_revlist "--min-parents=2 --max-parents=-1" tetrapus tripus normalmerge && + check_revlist "--min-parents=2 --no-max-parents" tetrapus tripus normalmerge && + check_revlist "--max-parents=0 --min-parents=1 --no-min-parents" one five +' + +test_expect_success 'dodecapus' ' + + roots= && + for i in 1 2 3 4 5 6 7 8 9 10 11 + do + git checkout -b root$i five && + test_commit $i && + roots="$roots root$i" || + return + done && + git checkout master && + test_tick && + git merge -m dodecapus $roots && + git tag dodecapus && + + check_revlist "--min-parents=4" dodecapus tetrapus && + check_revlist "--min-parents=8" dodecapus && + check_revlist "--min-parents=12" dodecapus && + check_revlist "--min-parents=13" && + check_revlist "--min-parents=4 --max-parents=11" tetrapus +' test_done diff --git a/t/t6017-rev-list-stdin.sh b/t/t6017-rev-list-stdin.sh index f1c32dba42..667b37564e 100755 --- a/t/t6017-rev-list-stdin.sh +++ b/t/t6017-rev-list-stdin.sh @@ -58,4 +58,21 @@ check side-3 ^side-4 -- file-3 check side-3 ^side-2 check side-3 ^side-2 -- file-1 +test_expect_success 'not only --stdin' ' + cat >expect <<-EOF && + 7 + + file-1 + file-2 + EOF + cat >input <<-EOF && + ^master^ + -- + file-2 + EOF + git log --pretty=tformat:%s --name-only --stdin master -- file-1 \ + <input >actual && + test_cmp expect actual +' + test_done diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index cb85132642..a9b0ac1efc 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -48,7 +48,7 @@ test_expect_success 'branch -v' ' git branch -v ) | sed -n -e "$script" >actual && - test_cmp expect actual + test_i18ncmp expect actual ' test_expect_success 'checkout' ' diff --git a/t/t6060-merge-index.sh b/t/t6060-merge-index.sh new file mode 100755 index 0000000000..debadbd299 --- /dev/null +++ b/t/t6060-merge-index.sh @@ -0,0 +1,100 @@ +#!/bin/sh + +test_description='basic git merge-index / git-merge-one-file tests' +. ./test-lib.sh + +test_expect_success 'setup diverging branches' ' + for i in 1 2 3 4 5 6 7 8 9 10; do + echo $i + done >file && + git add file && + git commit -m base && + git tag base && + sed s/2/two/ <file >tmp && + mv tmp file && + git commit -a -m two && + git tag two && + git checkout -b other HEAD^ && + sed s/10/ten/ <file >tmp && + mv tmp file && + git commit -a -m ten && + git tag ten +' + +cat >expect-merged <<'EOF' +1 +two +3 +4 +5 +6 +7 +8 +9 +ten +EOF + +test_expect_success 'read-tree does not resolve content merge' ' + git read-tree -i -m base ten two && + echo file >expect && + git diff-files --name-only --diff-filter=U >unmerged && + test_cmp expect unmerged +' + +test_expect_success 'git merge-index git-merge-one-file resolves' ' + git merge-index git-merge-one-file -a && + git diff-files --name-only --diff-filter=U >unmerged && + >expect && + test_cmp expect unmerged && + test_cmp expect-merged file && + git cat-file blob :file >file-index && + test_cmp expect-merged file-index +' + +test_expect_success 'setup bare merge' ' + git clone --bare . bare.git && + (cd bare.git && + GIT_INDEX_FILE=$PWD/merge.index && + export GIT_INDEX_FILE && + git read-tree -i -m base ten two + ) +' + +test_expect_success 'merge-one-file fails without a work tree' ' + (cd bare.git && + GIT_INDEX_FILE=$PWD/merge.index && + export GIT_INDEX_FILE && + test_must_fail git merge-index git-merge-one-file -a + ) +' + +test_expect_success 'merge-one-file respects GIT_WORK_TREE' ' + (cd bare.git && + mkdir work && + GIT_WORK_TREE=$PWD/work && + export GIT_WORK_TREE && + GIT_INDEX_FILE=$PWD/merge.index && + export GIT_INDEX_FILE && + git merge-index git-merge-one-file -a && + git cat-file blob :file >work/file-index + ) && + test_cmp expect-merged bare.git/work/file && + test_cmp expect-merged bare.git/work/file-index +' + +test_expect_success 'merge-one-file respects core.worktree' ' + mkdir subdir && + git clone . subdir/child && + (cd subdir && + GIT_DIR=$PWD/child/.git && + export GIT_DIR && + git config core.worktree "$PWD/child" && + git read-tree -i -m base ten two && + git merge-index git-merge-one-file -a && + git cat-file blob :file >file-index + ) && + test_cmp expect-merged subdir/child/file && + test_cmp expect-merged subdir/file-index +' + +test_done diff --git a/t/t6110-rev-list-sparse.sh b/t/t6110-rev-list-sparse.sh index 2a267e84cd..656ac7fe9d 100755 --- a/t/t6110-rev-list-sparse.sh +++ b/t/t6110-rev-list-sparse.sh @@ -3,13 +3,6 @@ test_description='operations that cull histories in unusual ways' . ./test-lib.sh -test_commit () { - echo "$1" >"$1.file" && - git add "$1.file" && - test_tick && - git commit -m "$1" -} - test_expect_success setup ' test_commit A && test_commit B && diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index 876d1ab743..f67aa6ff6a 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -124,7 +124,7 @@ warning: tag 'A' is really 'Q' here EOF check_describe A-* HEAD test_expect_success 'warning was displayed for Q' ' - test_cmp err.expect err.actual + test_i18ncmp err.expect err.actual ' test_expect_success 'rename tag Q back to A' ' mv .git/refs/tags/Q .git/refs/tags/A diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 3e7baaf89f..2ac1c66079 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1120,12 +1120,11 @@ test_expect_success \ ! (GIT_EDITOR=cat git tag -a initial-comment > actual) ' -test_expect_success \ - 'message in editor has initial comment: first line' ' +test_expect_success 'message in editor has initial comment: first line' ' # check the first line --- should be empty echo >first.expect && sed -e 1q <actual >first.actual && - test_cmp first.expect first.actual + test_i18ncmp first.expect first.actual ' test_expect_success \ diff --git a/t/t7011-skip-worktree-reading.sh b/t/t7011-skip-worktree-reading.sh index bb4066f767..8f3b54d826 100755 --- a/t/t7011-skip-worktree-reading.sh +++ b/t/t7011-skip-worktree-reading.sh @@ -24,7 +24,7 @@ H sub/2 EOF NULL_SHA1=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 -ZERO_SHA0=0000000000000000000000000000000000000000 + setup_absent() { test -f 1 && rm 1 git update-index --remove 1 && @@ -120,7 +120,7 @@ test_expect_success 'grep with skip-worktree file' ' test "$(git grep --no-ext-grep test)" = "1:test" ' -echo ":000000 100644 $ZERO_SHA0 $NULL_SHA1 A 1" > expected +echo ":000000 100644 $_z40 $NULL_SHA1 A 1" > expected test_expect_success 'diff-index does not examine skip-worktree absent entries' ' setup_absent && git diff-index HEAD -- 1 > result && diff --git a/t/t7012-skip-worktree-writing.sh b/t/t7012-skip-worktree-writing.sh index 582d0b54f1..9ceaa4049f 100755 --- a/t/t7012-skip-worktree-writing.sh +++ b/t/t7012-skip-worktree-writing.sh @@ -54,7 +54,7 @@ test_expect_success 'read-tree removes worktree, dirty case' ' ' NULL_SHA1=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 -ZERO_SHA0=0000000000000000000000000000000000000000 + setup_absent() { test -f 1 && rm 1 git update-index --remove 1 && @@ -127,13 +127,13 @@ EOF test_expect_success 'git-clean, absent case' ' setup_absent && git clean -n > result && - test_cmp expected result + test_i18ncmp expected result ' test_expect_success 'git-clean, dirty case' ' setup_dirty && git clean -n > result && - test_cmp expected result + test_i18ncmp expected result ' #TODO test_expect_failure 'git-apply adds file' false diff --git a/t/t7060-wtstatus.sh b/t/t7060-wtstatus.sh index fcac472598..b8cb4906aa 100755 --- a/t/t7060-wtstatus.sh +++ b/t/t7060-wtstatus.sh @@ -50,10 +50,72 @@ test_expect_success 'M/D conflict does not segfault' ' git commit -m delete && test_must_fail git merge master && test_must_fail git commit --dry-run >../actual && - test_cmp ../expect ../actual && + test_i18ncmp ../expect ../actual && git status >../actual && - test_cmp ../expect ../actual + test_i18ncmp ../expect ../actual ) ' +test_expect_success 'rename & unmerged setup' ' + git rm -f -r . && + cat "$TEST_DIRECTORY/README" >ONE && + git add ONE && + test_tick && + git commit -m "One commit with ONE" && + + echo Modified >TWO && + cat ONE >>TWO && + cat ONE >>THREE && + git add TWO THREE && + sha1=$(git rev-parse :ONE) && + git rm --cached ONE && + ( + echo "100644 $sha1 1 ONE" && + echo "100644 $sha1 2 ONE" && + echo "100644 $sha1 3 ONE" + ) | git update-index --index-info && + echo Further >>THREE +' + +test_expect_success 'rename & unmerged status' ' + git status -suno >actual && + cat >expect <<-EOF && + UU ONE + AM THREE + A TWO + EOF + test_cmp expect actual +' + +test_expect_success 'git diff-index --cached shows 2 added + 1 unmerged' ' + cat >expected <<-EOF && + U ONE + A THREE + A TWO + EOF + git diff-index --cached --name-status HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'git diff-index --cached -M shows 2 added + 1 unmerged' ' + cat >expected <<-EOF && + U ONE + A THREE + A TWO + EOF + git diff-index --cached --name-status HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'git diff-index --cached -C shows 2 copies + 1 unmerged' ' + cat >expected <<-EOF && + U ONE + C ONE THREE + C ONE TWO + EOF + git diff-index --cached -C --name-status HEAD | + sed "s/^C[0-9]*/C/g" >actual && + test_cmp expected actual +' + test_done diff --git a/t/t7102-reset.sh b/t/t7102-reset.sh index b8cf2603a1..f1cfc9ac95 100755 --- a/t/t7102-reset.sh +++ b/t/t7102-reset.sh @@ -426,7 +426,7 @@ EOF test_expect_success '--mixed refreshes the index' ' echo 123 >> file2 && git reset --mixed HEAD > output && - test_cmp expect output + test_i18ncmp expect output ' test_expect_success 'disambiguation (1)' ' diff --git a/t/t7110-reset-merge.sh b/t/t7110-reset-merge.sh index 70cdd8e618..a82a07a04a 100755 --- a/t/t7110-reset-merge.sh +++ b/t/t7110-reset-merge.sh @@ -237,7 +237,7 @@ test_expect_success '"reset --keep HEAD^" fails with pending merge' ' git reset --hard third && test_must_fail git merge branch1 && test_must_fail git reset --keep HEAD^ 2>err.log && - grep "middle of a merge" err.log + test_i18ngrep "middle of a merge" err.log ' # The next test will test the following: @@ -263,7 +263,7 @@ test_expect_success '"reset --keep HEAD" fails with pending merge' ' git reset --hard third && test_must_fail git merge branch1 && test_must_fail git reset --keep HEAD 2>err.log && - grep "middle of a merge" err.log + test_i18ngrep "middle of a merge" err.log ' test_expect_success '--merge is ok with added/deleted merge' ' @@ -289,7 +289,7 @@ test_expect_success '--keep fails with added/deleted merge' ' git diff --exit-code file3 && git diff --exit-code branch3 file3 && test_must_fail git reset --keep HEAD 2>err.log && - grep "middle of a merge" err.log + test_i18ngrep "middle of a merge" err.log ' test_done diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 0c002ab695..07fb53adcb 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -228,7 +228,7 @@ test_expect_success 'checkout to detach HEAD (with advice declined)' ' git config advice.detachedHead false && git checkout -f renamer && git clean -f && git checkout renamer^ 2>messages && - grep "HEAD is now at 7329388" messages && + test_i18ngrep "HEAD is now at 7329388" messages && test 1 -eq $(wc -l <messages) && H=$(git rev-parse --verify HEAD) && M=$(git show-ref -s --verify refs/heads/master) && @@ -246,7 +246,7 @@ test_expect_success 'checkout to detach HEAD' ' git config advice.detachedHead true && git checkout -f renamer && git clean -f && git checkout renamer^ 2>messages && - grep "HEAD is now at 7329388" messages && + test_i18ngrep "HEAD is now at 7329388" messages && test 1 -lt $(wc -l <messages) && H=$(git rev-parse --verify HEAD) && M=$(git show-ref -s --verify refs/heads/master) && diff --git a/t/t7300-clean.sh b/t/t7300-clean.sh index 02f67b73b7..800b5368a5 100755 --- a/t/t7300-clean.sh +++ b/t/t7300-clean.sh @@ -110,7 +110,7 @@ test_expect_success 'git clean with prefix' ' ' -test_expect_success 'git clean with relative prefix' ' +test_expect_success C_LOCALE_OUTPUT 'git clean with relative prefix' ' mkdir -p build docs && touch a.out src/part3.c docs/manual.txt obj.o build/lib.so && @@ -125,7 +125,7 @@ test_expect_success 'git clean with relative prefix' ' } ' -test_expect_success 'git clean with absolute path' ' +test_expect_success C_LOCALE_OUTPUT 'git clean with absolute path' ' mkdir -p build docs && touch a.out src/part3.c docs/manual.txt obj.o build/lib.so && @@ -377,7 +377,7 @@ test_expect_success 'clean.requireForce and -f' ' ' -test_expect_success 'core.excludesfile' ' +test_expect_success C_LOCALE_OUTPUT 'core.excludesfile' ' echo excludes >excludes && echo included >included && @@ -453,4 +453,11 @@ test_expect_success 'git clean -e' ' ) ' +test_expect_success SANITY 'git clean -d with an unreadable empty directory' ' + mkdir foo && + chmod a= foo && + git clean -dfx foo && + ! test -d foo +' + test_done diff --git a/t/t7403-submodule-sync.sh b/t/t7403-submodule-sync.sh index e5b19538b0..d600583cef 100755 --- a/t/t7403-submodule-sync.sh +++ b/t/t7403-submodule-sync.sh @@ -52,7 +52,7 @@ test_expect_success 'change submodule url' ' test_expect_success '"git submodule sync" should update submodule URLs' ' (cd super-clone && - git pull && + git pull --no-recurse-submodules && git submodule sync ) && test -d "$(git config -f super-clone/submodule/.git/config \ diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index fa9d23aa31..bf7c788735 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -74,6 +74,26 @@ test_expect_success 'submodule update detaching the HEAD ' ' ) ' +apos="'"; +test_expect_success 'submodule update does not fetch already present commits' ' + (cd submodule && + echo line3 >> file && + git add file && + test_tick && + git commit -m "upstream line3" + ) && + (cd super/submodule && + head=$(git rev-parse --verify HEAD) && + echo "Submodule path ${apos}submodule$apos: checked out $apos$head$apos" > ../../expected && + git reset --hard HEAD~1 + ) && + (cd super && + git submodule update > ../actual 2> ../actual.err + ) && + test_cmp expected actual && + ! test -s actual.err +' + test_expect_success 'submodule update --rebase staying on master' ' (cd super/submodule && git checkout master diff --git a/t/t7500-commit.sh b/t/t7500-commit.sh index 5976f598fc..47096f9014 100755 --- a/t/t7500-commit.sh +++ b/t/t7500-commit.sh @@ -15,7 +15,7 @@ commit_msg_is () { printf "%s" "$(git log --pretty=format:%s%b -1)" >$expect && printf "%s" "$1" >$actual && - test_cmp $expect $actual + test_i18ncmp $expect $actual } # A sanity check to see if commit is working at all. diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index 8980738c75..7f7f7c7b95 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -14,8 +14,12 @@ test_tick test_expect_success \ "initial status" \ "echo 'bongo bongo' >file && - git add file && \ - git status | grep 'Initial commit'" + git add file" + +test_expect_success "Constructing initial commit" ' + git status >actual && + test_i18ngrep "Initial commit" actual +' test_expect_success \ "fail initial amend" \ diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 50da034cd3..3f3adc31b9 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -22,7 +22,7 @@ check_summary_oneline() { SUMMARY_POSTFIX="$(git log -1 --pretty='format:%h')" echo "[$SUMMARY_PREFIX $SUMMARY_POSTFIX] $2" >exp && - test_cmp exp act + test_i18ncmp exp act } test_expect_success 'output summary format' ' @@ -32,7 +32,10 @@ test_expect_success 'output summary format' ' check_summary_oneline "root-commit" "initial" && echo change >>file1 && - git add file1 && + git add file1 +' + +test_expect_success 'output summary format: root-commit' ' check_summary_oneline "" "a change" ' @@ -215,19 +218,21 @@ test_expect_success 'cleanup commit messages (strip,-F)' ' ' -echo "sample - -# Please enter the commit message for your changes. Lines starting -# with '#' will be ignored, and an empty message aborts the commit." >expect - test_expect_success 'cleanup commit messages (strip,-F,-e)' ' echo >>negative && { echo;echo sample;echo; } >text && git commit -e -F text -a && - head -n 4 .git/COMMIT_EDITMSG >actual && - test_cmp expect actual + head -n 4 .git/COMMIT_EDITMSG >actual +' + +echo "sample +# Please enter the commit message for your changes. Lines starting +# with '#' will be ignored, and an empty message aborts the commit." >expect + +test_expect_success 'cleanup commit messages (strip,-F,-e): output' ' + test_i18ncmp expect actual ' echo "# @@ -235,11 +240,10 @@ echo "# #" >> expect test_expect_success 'author different from committer' ' - echo >>negative && - git commit -e -m "sample" + test_might_fail git commit -e -m "sample" && head -n 7 .git/COMMIT_EDITMSG >actual && - test_cmp expect actual + test_i18ncmp expect actual ' mv expect expect.tmp @@ -258,8 +262,8 @@ test_expect_success 'committer is automatic' ' test_must_fail git commit -e -m "sample" ) && head -n 8 .git/COMMIT_EDITMSG | \ - sed "s/^# Committer: .*/# Committer:/" >actual && - test_cmp expect actual + sed "s/^# Committer: .*/# Committer:/" >actual + test_i18ncmp expect actual ' pwd=`pwd` @@ -362,9 +366,9 @@ try_commit () { GIT_EDITOR=.git/FAKE_EDITOR git commit -a $* $use_template && case "$use_template" in '') - ! grep "^## Custom template" .git/COMMIT_EDITMSG ;; + test_i18ngrep ! "^## Custom template" .git/COMMIT_EDITMSG ;; *) - grep "^## Custom template" .git/COMMIT_EDITMSG ;; + test_i18ngrep "^## Custom template" .git/COMMIT_EDITMSG ;; esac } @@ -373,67 +377,67 @@ try_commit_status_combo () { test_expect_success 'commit' ' clear_config commit.status && try_commit "" && - grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' test_expect_success 'commit' ' clear_config commit.status && try_commit "" && - grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' test_expect_success 'commit --status' ' clear_config commit.status && try_commit --status && - grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' test_expect_success 'commit --no-status' ' clear_config commit.status && try_commit --no-status && - ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep ! "^# Changes to be committed:" .git/COMMIT_EDITMSG ' test_expect_success 'commit with commit.status = yes' ' clear_config commit.status && git config commit.status yes && try_commit "" && - grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' test_expect_success 'commit with commit.status = no' ' clear_config commit.status && git config commit.status no && try_commit "" && - ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep ! "^# Changes to be committed:" .git/COMMIT_EDITMSG ' test_expect_success 'commit --status with commit.status = yes' ' clear_config commit.status && git config commit.status yes && try_commit --status && - grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' test_expect_success 'commit --no-status with commit.status = yes' ' clear_config commit.status && git config commit.status yes && try_commit --no-status && - ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep ! "^# Changes to be committed:" .git/COMMIT_EDITMSG ' test_expect_success 'commit --status with commit.status = no' ' clear_config commit.status && git config commit.status no && try_commit --status && - grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG ' test_expect_success 'commit --no-status with commit.status = no' ' clear_config commit.status && git config commit.status no && try_commit --no-status && - ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG + test_i18ngrep ! "^# Changes to be committed:" .git/COMMIT_EDITMSG ' } diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh index 3d4f85d74f..c8d50a6567 100755 --- a/t/t7506-status-submodule.sh +++ b/t/t7506-status-submodule.sh @@ -22,19 +22,19 @@ test_expect_success 'setup' ' test_expect_success 'status clean' ' git status >output && - grep "nothing to commit" output + test_i18ngrep "nothing to commit" output ' test_expect_success 'commit --dry-run -a clean' ' test_must_fail git commit --dry-run -a >output && - grep "nothing to commit" output + test_i18ngrep "nothing to commit" output ' test_expect_success 'status with modified file in submodule' ' (cd sub && git reset --hard) && echo "changed" >sub/foo && git status >output && - grep "modified: sub (modified content)" output + test_i18ngrep "modified: sub (modified content)" output ' test_expect_success 'status with modified file in submodule (porcelain)' ' @@ -49,7 +49,7 @@ test_expect_success 'status with modified file in submodule (porcelain)' ' test_expect_success 'status with added file in submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && git status >output && - grep "modified: sub (modified content)" output + test_i18ngrep "modified: sub (modified content)" output ' test_expect_success 'status with added file in submodule (porcelain)' ' @@ -64,12 +64,12 @@ test_expect_success 'status with untracked file in submodule' ' (cd sub && git reset --hard) && echo "content" >sub/new-file && git status >output && - grep "modified: sub (untracked content)" output + test_i18ngrep "modified: sub (untracked content)" output ' test_expect_success 'status -uno with untracked file in submodule' ' git status -uno >output && - grep "^nothing to commit" output + test_i18ngrep "^nothing to commit" output ' test_expect_success 'status with untracked file in submodule (porcelain)' ' @@ -83,7 +83,7 @@ test_expect_success 'status with added and untracked file in submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && echo "content" >sub/new-file && git status >output && - grep "modified: sub (modified content, untracked content)" output + test_i18ngrep "modified: sub (modified content, untracked content)" output ' test_expect_success 'status with added and untracked file in submodule (porcelain)' ' @@ -101,7 +101,7 @@ test_expect_success 'status with modified file in modified submodule' ' (cd sub && echo "next change" >foo && git commit -m "next change" foo) && echo "changed" >sub/foo && git status >output && - grep "modified: sub (new commits, modified content)" output + test_i18ngrep "modified: sub (new commits, modified content)" output ' test_expect_success 'status with modified file in modified submodule (porcelain)' ' @@ -116,7 +116,7 @@ test_expect_success 'status with modified file in modified submodule (porcelain) test_expect_success 'status with added file in modified submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && git status >output && - grep "modified: sub (new commits, modified content)" output + test_i18ngrep "modified: sub (new commits, modified content)" output ' test_expect_success 'status with added file in modified submodule (porcelain)' ' @@ -131,7 +131,7 @@ test_expect_success 'status with untracked file in modified submodule' ' (cd sub && git reset --hard) && echo "content" >sub/new-file && git status >output && - grep "modified: sub (new commits, untracked content)" output + test_i18ngrep "modified: sub (new commits, untracked content)" output ' test_expect_success 'status with untracked file in modified submodule (porcelain)' ' @@ -145,7 +145,7 @@ test_expect_success 'status with added and untracked file in modified submodule' (cd sub && git reset --hard && echo >foo && git add foo) && echo "content" >sub/new-file && git status >output && - grep "modified: sub (new commits, modified content, untracked content)" output + test_i18ngrep "modified: sub (new commits, modified content, untracked content)" output ' test_expect_success 'status with added and untracked file in modified submodule (porcelain)' ' @@ -170,7 +170,7 @@ test_expect_success 'setup .git file for sub' ' test_expect_success 'status with added file in modified submodule with .git file' ' (cd sub && git reset --hard && echo >foo && git add foo) && git status >output && - grep "modified: sub (new commits, modified content)" output + test_i18ngrep "modified: sub (new commits, modified content)" output ' test_expect_success 'rm submodule contents' ' @@ -179,12 +179,12 @@ test_expect_success 'rm submodule contents' ' test_expect_success 'status clean (empty submodule dir)' ' git status >output && - grep "nothing to commit" output + test_i18ngrep "nothing to commit" output ' test_expect_success 'status -a clean (empty submodule dir)' ' test_must_fail git commit --dry-run -a >output && - grep "nothing to commit" output + test_i18ngrep "nothing to commit" output ' test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index f1dc5c3b6a..cd6e2c5e87 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -16,7 +16,7 @@ test_expect_success 'status -h in broken repository' ' echo "[status] showuntrackedfiles = CORRUPT" >>.git/config && test_expect_code 129 git status -h >usage 2>&1 ) && - grep "[Uu]sage" broken/usage + test_i18ngrep "[Uu]sage" broken/usage ' test_expect_success 'commit -h in broken repository' ' @@ -28,7 +28,7 @@ test_expect_success 'commit -h in broken repository' ' echo "[status] showuntrackedfiles = CORRUPT" >>.git/config && test_expect_code 129 git commit -h >usage 2>&1 ) && - grep "[Uu]sage" broken/usage + test_i18ngrep "[Uu]sage" broken/usage ' test_expect_success 'setup' ' @@ -56,9 +56,7 @@ test_expect_success 'setup' ' ' test_expect_success 'status (1)' ' - - grep "use \"git rm --cached <file>\.\.\.\" to unstage" output - + test_i18ngrep "use \"git rm --cached <file>\.\.\.\" to unstage" output ' cat >expect <<\EOF @@ -86,10 +84,8 @@ cat >expect <<\EOF EOF test_expect_success 'status (2)' ' - git status >output && - test_cmp expect output - + test_i18ncmp expect output ' cat >expect <<\EOF @@ -109,17 +105,14 @@ cat >expect <<\EOF # untracked EOF -git config advice.statusHints false - test_expect_success 'status (advice.statusHints false)' ' - + test_when_finished "git config --unset advice.statusHints" && + git config advice.statusHints false && git status >output && - test_cmp expect output + test_i18ncmp expect output ' -git config --unset advice.statusHints - cat >expect <<\EOF M dir1/modified A dir2/added @@ -157,6 +150,12 @@ test_expect_success 'status -s -b' ' ' +test_expect_success 'setup dir3' ' + mkdir dir3 && + : >dir3/untracked1 && + : >dir3/untracked2 +' + cat >expect <<EOF # On branch master # Changes to be committed: @@ -173,17 +172,15 @@ cat >expect <<EOF # Untracked files not listed (use -u option to show untracked files) EOF test_expect_success 'status -uno' ' - mkdir dir3 && - : >dir3/untracked1 && - : >dir3/untracked2 && git status -uno >output && - test_cmp expect output + test_i18ncmp expect output ' test_expect_success 'status (status.showUntrackedFiles no)' ' git config status.showuntrackedfiles no + test_when_finished "git config --unset status.showuntrackedfiles" && git status >output && - test_cmp expect output + test_i18ncmp expect output ' cat >expect <<EOF @@ -199,7 +196,7 @@ EOF git config advice.statusHints false test_expect_success 'status -uno (advice.statusHints false)' ' git status -uno >output && - test_cmp expect output + test_i18ncmp expect output ' git config --unset advice.statusHints @@ -208,7 +205,6 @@ cat >expect << EOF A dir2/added EOF test_expect_success 'status -s -uno' ' - git config --unset status.showuntrackedfiles git status -s -uno >output && test_cmp expect output ' @@ -245,13 +241,14 @@ cat >expect <<EOF EOF test_expect_success 'status -unormal' ' git status -unormal >output && - test_cmp expect output + test_i18ncmp expect output ' test_expect_success 'status (status.showUntrackedFiles normal)' ' git config status.showuntrackedfiles normal + test_when_finished "git config --unset status.showuntrackedfiles" && git status >output && - test_cmp expect output + test_i18ncmp expect output ' cat >expect <<EOF @@ -266,7 +263,6 @@ A dir2/added ?? untracked EOF test_expect_success 'status -s -unormal' ' - git config --unset status.showuntrackedfiles git status -s -unormal >output && test_cmp expect output ' @@ -304,14 +300,18 @@ cat >expect <<EOF EOF test_expect_success 'status -uall' ' git status -uall >output && - test_cmp expect output + test_i18ncmp expect output ' + test_expect_success 'status (status.showUntrackedFiles all)' ' git config status.showuntrackedfiles all + test_when_finished "git config --unset status.showuntrackedfiles" && git status >output && - rm -rf dir3 && - git config --unset status.showuntrackedfiles && - test_cmp expect output + test_i18ncmp expect output +' + +test_expect_success 'teardown dir3' ' + rm -rf dir3 ' cat >expect <<EOF @@ -362,10 +362,8 @@ cat >expect <<\EOF EOF test_expect_success 'status with relative paths' ' - (cd dir1 && git status) >output && - test_cmp expect output - + test_i18ncmp expect output ' cat >expect <<\EOF @@ -435,20 +433,17 @@ cat >expect <<\EOF EOF test_expect_success 'status with color.ui' ' - git config color.ui always && + test_when_finished "git config --unset color.ui" && git status | test_decode_color >output && - test_cmp expect output - + test_i18ncmp expect output ' test_expect_success 'status with color.status' ' - - git config --unset color.ui && git config color.status always && + test_when_finished "git config --unset color.status" && git status | test_decode_color >output && - test_cmp expect output - + test_i18ncmp expect output ' cat >expect <<\EOF @@ -464,7 +459,6 @@ EOF test_expect_success 'status -s with color.ui' ' - git config --unset color.status && git config color.ui always && git status -s | test_decode_color >output && test_cmp expect output @@ -566,9 +560,10 @@ EOF test_expect_success 'status without relative paths' ' - git config status.relativePaths false + git config status.relativePaths false && + test_when_finished "git config --unset status.relativePaths" && (cd dir1 && git status) >output && - test_cmp expect output + test_i18ncmp expect output ' @@ -585,6 +580,8 @@ EOF test_expect_success 'status -s without relative paths' ' + git config status.relativePaths false && + test_when_finished "git config --unset status.relativePaths" && (cd dir1 && git status -s) >output && test_cmp expect output @@ -608,7 +605,7 @@ cat <<EOF >expect EOF test_expect_success 'dry-run of partial commit excluding new file in index' ' git commit --dry-run dir1/modified >output && - test_cmp expect output + test_i18ncmp expect output ' cat >expect <<EOF @@ -657,13 +654,13 @@ cat >expect <<EOF EOF test_expect_success 'status submodule summary is disabled by default' ' git status >output && - test_cmp expect output + test_i18ncmp expect output ' # we expect the same as the previous test test_expect_success 'status --untracked-files=all does not show submodule' ' git status --untracked-files=all >output && - test_cmp expect output + test_i18ncmp expect output ' cat >expect <<EOF @@ -722,7 +719,7 @@ EOF test_expect_success 'status submodule summary' ' git config status.submodulesummary 10 && git status >output && - test_cmp expect output + test_i18ncmp expect output ' cat >expect <<EOF @@ -760,13 +757,13 @@ cat >expect <<EOF # untracked no changes added to commit (use "git add" and/or "git commit -a") EOF -test_expect_success 'status submodule summary (clean submodule)' ' +test_expect_success 'status submodule summary (clean submodule): commit' ' git commit -m "commit submodule" && git config status.submodulesummary 10 && test_must_fail git commit --dry-run >output && - test_cmp expect output && + test_i18ncmp expect output && git status >output && - test_cmp expect output + test_i18ncmp expect output ' cat >expect <<EOF @@ -815,7 +812,7 @@ EOF test_expect_success 'commit --dry-run submodule summary (--amend)' ' git config status.submodulesummary 10 && git commit --dry-run --amend >output && - test_cmp expect output + test_i18ncmp expect output ' test_expect_success POSIXPERM,SANITY 'status succeeds in a read-only repository' ' @@ -868,19 +865,19 @@ cat > expect << EOF EOF test_expect_success '--ignore-submodules=untracked suppresses submodules with untracked content' ' - echo modified > sm/untracked && - git status --ignore-submodules=untracked > output && - test_cmp expect output + echo modified sm/untracked && + git status --ignore-submodules=untracked >output && + test_i18ncmp expect output ' test_expect_success '.gitmodules ignore=untracked suppresses submodules with untracked content' ' git config diff.ignoreSubmodules dirty && git status >output && - test_cmp expect output && + test_i18ncmp expect output && git config --add -f .gitmodules submodule.subname.ignore untracked && git config --add -f .gitmodules submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config -f .gitmodules --remove-section submodule.subname && git config --unset diff.ignoreSubmodules ' @@ -890,15 +887,15 @@ test_expect_success '.git/config ignore=untracked suppresses submodules with unt git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore untracked && git config --add submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config --remove-section submodule.subname && git config --remove-section -f .gitmodules submodule.subname ' test_expect_success '--ignore-submodules=dirty suppresses submodules with untracked content' ' - git status --ignore-submodules=dirty > output && - test_cmp expect output + git status --ignore-submodules=dirty >output && + test_i18ncmp expect output ' test_expect_success '.gitmodules ignore=dirty suppresses submodules with untracked content' ' @@ -907,8 +904,8 @@ test_expect_success '.gitmodules ignore=dirty suppresses submodules with untrack ! test -s actual && git config --add -f .gitmodules submodule.subname.ignore dirty && git config --add -f .gitmodules submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config -f .gitmodules --remove-section submodule.subname && git config --unset diff.ignoreSubmodules ' @@ -918,23 +915,23 @@ test_expect_success '.git/config ignore=dirty suppresses submodules with untrack git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore dirty && git config --add submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config --remove-section submodule.subname && git config -f .gitmodules --remove-section submodule.subname ' test_expect_success '--ignore-submodules=dirty suppresses submodules with modified content' ' - echo modified > sm/foo && - git status --ignore-submodules=dirty > output && - test_cmp expect output + echo modified >sm/foo && + git status --ignore-submodules=dirty >output && + test_i18ncmp expect output ' test_expect_success '.gitmodules ignore=dirty suppresses submodules with modified content' ' git config --add -f .gitmodules submodule.subname.ignore dirty && git config --add -f .gitmodules submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config -f .gitmodules --remove-section submodule.subname ' @@ -943,8 +940,8 @@ test_expect_success '.git/config ignore=dirty suppresses submodules with modifie git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore dirty && git config --add submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config --remove-section submodule.subname && git config -f .gitmodules --remove-section submodule.subname ' @@ -983,14 +980,14 @@ EOF test_expect_success "--ignore-submodules=untracked doesn't suppress submodules with modified content" ' git status --ignore-submodules=untracked > output && - test_cmp expect output + test_i18ncmp expect output ' test_expect_success ".gitmodules ignore=untracked doesn't suppress submodules with modified content" ' git config --add -f .gitmodules submodule.subname.ignore untracked && git config --add -f .gitmodules submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config -f .gitmodules --remove-section submodule.subname ' @@ -999,8 +996,8 @@ test_expect_success ".git/config ignore=untracked doesn't suppress submodules wi git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore untracked && git config --add submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config --remove-section submodule.subname && git config -f .gitmodules --remove-section submodule.subname ' @@ -1045,14 +1042,14 @@ EOF test_expect_success "--ignore-submodules=untracked doesn't suppress submodule summary" ' git status --ignore-submodules=untracked > output && - test_cmp expect output + test_i18ncmp expect output ' test_expect_success ".gitmodules ignore=untracked doesn't suppress submodule summary" ' git config --add -f .gitmodules submodule.subname.ignore untracked && git config --add -f .gitmodules submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config -f .gitmodules --remove-section submodule.subname ' @@ -1061,21 +1058,21 @@ test_expect_success ".git/config ignore=untracked doesn't suppress submodule sum git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore untracked && git config --add submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config --remove-section submodule.subname && git config -f .gitmodules --remove-section submodule.subname ' test_expect_success "--ignore-submodules=dirty doesn't suppress submodule summary" ' git status --ignore-submodules=dirty > output && - test_cmp expect output + test_i18ncmp expect output ' test_expect_success ".gitmodules ignore=dirty doesn't suppress submodule summary" ' git config --add -f .gitmodules submodule.subname.ignore dirty && git config --add -f .gitmodules submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config -f .gitmodules --remove-section submodule.subname ' @@ -1084,8 +1081,8 @@ test_expect_success ".git/config ignore=dirty doesn't suppress submodule summary git config --add -f .gitmodules submodule.subname.path sm && git config --add submodule.subname.ignore dirty && git config --add submodule.subname.path sm && - git status > output && - test_cmp expect output && + git status >output && + test_i18ncmp expect output && git config --remove-section submodule.subname && git config -f .gitmodules --remove-section submodule.subname ' @@ -1113,7 +1110,7 @@ EOF test_expect_success "--ignore-submodules=all suppresses submodule summary" ' git status --ignore-submodules=all > output && - test_cmp expect output + test_i18ncmp expect output ' test_expect_failure '.gitmodules ignore=all suppresses submodule summary' ' diff --git a/t/t7509-commit.sh b/t/t7509-commit.sh index 77b6920029..b61fd3c3c4 100755 --- a/t/t7509-commit.sh +++ b/t/t7509-commit.sh @@ -157,4 +157,33 @@ test_expect_success '--reset-author should be rejected without -c/-C/--amend' ' test_must_fail git commit -a --reset-author -m done ' +test_expect_success 'commit respects CHERRY_PICK_HEAD and MERGE_MSG' ' + echo "cherry-pick 1a" >>foo && + test_tick && + git commit -am "cherry-pick 1" --author="Cherry <cherry@pick.er>" && + git tag cherry-pick-head && + git rev-parse cherry-pick-head >.git/CHERRY_PICK_HEAD && + echo "This is a MERGE_MSG" >.git/MERGE_MSG && + echo "cherry-pick 1b" >>foo && + test_tick && + git commit -a && + author_header cherry-pick-head >expect && + author_header HEAD >actual && + test_cmp expect actual && + + echo "This is a MERGE_MSG" >expect && + message_body HEAD >actual && + test_cmp expect actual +' + +test_expect_success '--reset-author with CHERRY_PICK_HEAD' ' + git rev-parse cherry-pick-head >.git/CHERRY_PICK_HEAD && + echo "cherry-pick 2" >>foo && + test_tick && + git commit -am "cherry-pick 2" --reset-author && + echo "author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> $GIT_AUTHOR_DATE" >expect && + author_header HEAD >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index b147a1bd69..2d4ed206e1 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -324,6 +324,38 @@ test_expect_success 'merge c1 with c2 (no-commit in config)' ' test_debug 'git log --graph --decorate --oneline --all' +test_expect_success 'merge c1 with c2 (log in config)' ' + git config branch.master.mergeoptions "" && + git reset --hard c1 && + git merge --log c2 && + git show -s --pretty=tformat:%s%n%b >expect && + + git config branch.master.mergeoptions --log && + git reset --hard c1 && + git merge c2 && + git show -s --pretty=tformat:%s%n%b >actual && + + test_cmp expect actual +' + +test_expect_success 'merge c1 with c2 (log in config gets overridden)' ' + ( + git config --remove-section branch.master + git config --remove-section merge + ) + git reset --hard c1 && + git merge c2 && + git show -s --pretty=tformat:%s%n%b >expect && + + git config branch.master.mergeoptions "--no-log" && + git config merge.log true && + git reset --hard c1 && + git merge c2 && + git show -s --pretty=tformat:%s%n%b >actual && + + test_cmp expect actual +' + test_expect_success 'merge c1 with c2 (squash in config)' ' git reset --hard c1 && git config branch.master.mergeoptions "--squash" && @@ -498,7 +530,7 @@ test_debug 'git log --graph --decorate --oneline --all' test_expect_success 'in-index merge' ' git reset --hard c0 && git merge --no-ff -s resolve c1 >out && - grep "Wonderful." out && + test_i18ngrep "Wonderful." out && verify_parents $c0 $c1 ' diff --git a/t/t7607-merge-overwrite.sh b/t/t7607-merge-overwrite.sh index 4d5ce4e682..72a8731d5e 100755 --- a/t/t7607-merge-overwrite.sh +++ b/t/t7607-merge-overwrite.sh @@ -122,7 +122,7 @@ test_expect_success 'will not overwrite untracked file in leading path' ' rm -f sub sub2 ' -test_expect_failure SYMLINKS 'will not overwrite untracked symlink in leading path' ' +test_expect_success SYMLINKS 'will not overwrite untracked symlink in leading path' ' git reset --hard c0 && rm -rf sub && mkdir sub2 && @@ -151,9 +151,33 @@ test_expect_success 'will not overwrite untracked file on unborn branch' ' git checkout --orphan new && cp important c0.c && test_must_fail git merge c0 2>out && - test_cmp out expect && + test_i18ncmp out expect +' + +test_expect_success 'will not overwrite untracked file on unborn branch .git/MERGE_HEAD sanity etc.' ' + test_when_finished "rm c0.c" && test_path_is_missing .git/MERGE_HEAD && test_cmp important c0.c ' +test_expect_success 'failed merge leaves unborn branch in the womb' ' + test_must_fail git rev-parse --verify HEAD +' + +test_expect_success 'set up unborn branch and content' ' + git symbolic-ref HEAD refs/heads/unborn && + rm -f .git/index && + echo foo > tracked-file && + git add tracked-file && + echo bar > untracked-file +' + +test_expect_success 'will not clobber WT/index when merging into unborn' ' + git merge master && + grep foo tracked-file && + git show :tracked-file >expect && + grep foo expect && + grep bar untracked-file +' + test_done diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh index d78bdec330..cbc08e3276 100755 --- a/t/t7610-mergetool.sh +++ b/t/t7610-mergetool.sh @@ -16,23 +16,57 @@ Testing basic merge tool invocation' test_expect_success 'setup' ' git config rerere.enabled true && echo master >file1 && + echo master file11 >file11 && + echo master file12 >file12 && + echo master file13 >file13 && + echo master file14 >file14 && mkdir subdir && echo master sub >subdir/file3 && - git add file1 subdir/file3 && - git commit -m "added file1" && + test_create_repo submod && + ( + cd submod && + : >foo && + git add foo && + git commit -m "Add foo" + ) && + git submodule add git://example.com/submod submod && + git add file1 file1[1-4] subdir/file3 .gitmodules submod && + git commit -m "add initial versions" && git checkout -b branch1 master && + git submodule update -N && echo branch1 change >file1 && echo branch1 newfile >file2 && + echo branch1 change file11 >file11 && + echo branch1 change file13 >file13 && echo branch1 sub >subdir/file3 && - git add file1 file2 subdir/file3 && + ( + cd submod && + echo branch1 submodule >bar && + git add bar && + git commit -m "Add bar on branch1" && + git checkout -b submod-branch1 + ) && + git add file1 file11 file13 file2 subdir/file3 submod && + git rm file12 && git commit -m "branch1 changes" && git checkout master && + git submodule update -N && echo master updated >file1 && echo master new >file2 && + echo master updated file12 >file12 && + echo master updated file14 >file14 && echo master new sub >subdir/file3 && - git add file1 file2 subdir/file3 && + ( + cd submod && + echo master submodule >bar && + git add bar && + git commit -m "Add bar on master" && + git checkout -b submod-master + ) && + git add file1 file12 file14 file2 subdir/file3 submod && + git rm file11 && git commit -m "master updates" && git config merge.tool mytool && @@ -42,13 +76,18 @@ test_expect_success 'setup' ' test_expect_success 'custom mergetool' ' git checkout -b test1 branch1 && + git submodule update -N && test_must_fail git merge master >/dev/null 2>&1 && ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && test "$(cat file1)" = "master updated" && test "$(cat file2)" = "master new" && test "$(cat subdir/file3)" = "master new sub" && + test "$(cat submod/bar)" = "branch1 submodule" && git commit -m "branch1 resolved with mergetool" ' @@ -59,9 +98,14 @@ test_expect_success 'mergetool crlf' ' ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod >/dev/null 2>&1 ) && test "$(printf x | cat file1 -)" = "$(printf "master updated\r\nx")" && test "$(printf x | cat file2 -)" = "$(printf "master new\r\nx")" && test "$(printf x | cat subdir/file3 -)" = "$(printf "master new sub\r\nx")" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && git commit -m "branch1 resolved with mergetool - autocrlf" && git config core.autocrlf false && git reset --hard @@ -69,6 +113,7 @@ test_expect_success 'mergetool crlf' ' test_expect_success 'mergetool in subdir' ' git checkout -b test3 branch1 && + git submodule update -N && ( cd subdir && test_must_fail git merge master >/dev/null 2>&1 && @@ -82,16 +127,24 @@ test_expect_success 'mergetool on file in parent dir' ' cd subdir && ( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) && ( yes "" | git mergetool ../file2 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool ../file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool ../file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool ../submod >/dev/null 2>&1 ) && test "$(cat ../file1)" = "master updated" && test "$(cat ../file2)" = "master new" && + test "$(cat ../submod/bar)" = "branch1 submodule" && git commit -m "branch1 resolved with mergetool - subdir" ) ' test_expect_success 'mergetool skips autoresolved' ' git checkout -b test4 branch1 && + git submodule update -N && test_must_fail git merge master && test -n "$(git ls-files -u)" && + ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git reset --hard @@ -102,13 +155,272 @@ test_expect_success 'mergetool merges all from subdir' ' cd subdir && git config rerere.enabled false && test_must_fail git merge master && - git mergetool --no-prompt && + ( yes "r" | git mergetool ../submod ) && + ( yes "d" "d" | git mergetool --no-prompt ) && test "$(cat ../file1)" = "master updated" && test "$(cat ../file2)" = "master new" && test "$(cat file3)" = "master new sub" && - git add ../file1 ../file2 file3 && + ( cd .. && git submodule update -N ) && + test "$(cat ../submod/bar)" = "master submodule" && git commit -m "branch2 resolved by mergetool from subdir" ) ' +test_expect_success 'mergetool skips resolved paths when rerere is active' ' + git config rerere.enabled true && + rm -rf .git/rr-cache && + git checkout -b test5 branch1 + git submodule update -N && + test_must_fail git merge master >/dev/null 2>&1 && + ( yes "l" | git mergetool --no-prompt submod >/dev/null 2>&1 ) && + ( yes "d" "d" | git mergetool --no-prompt >/dev/null 2>&1 ) && + git submodule update -N && + output="$(yes "n" | git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git reset --hard +' + +test_expect_success 'deleted vs modified submodule' ' + git checkout -b test6 branch1 && + git submodule update -N && + mv submod submod-movedaside && + git rm submod && + git commit -m "Submodule deleted from branch" && + git checkout -b test6.a test6 && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod ) && + rmdir submod && mv submod-movedaside submod && + test "$(cat submod/bar)" = "branch1 submodule" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping module" && + + mv submod submod-movedaside && + git checkout -b test6.b test6 && + git submodule update -N && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod ) && + test ! -e submod && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by deleting module" && + + mv submod-movedaside submod && + git checkout -b test6.c master && + git submodule update -N && + test_must_fail git merge test6 && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod ) && + test ! -e submod && + test -d submod.orig && + git submodule update -N && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by deleting module" && + mv submod.orig submod && + + git checkout -b test6.d master && + git submodule update -N && + test_must_fail git merge test6 && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod ) && + test "$(cat submod/bar)" = "master submodule" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping module" && + git reset --hard HEAD +' + +test_expect_success 'file vs modified submodule' ' + git checkout -b test7 branch1 && + git submodule update -N && + mv submod submod-movedaside && + git rm submod && + echo not a submodule >submod && + git add submod && + git commit -m "Submodule path becomes file" && + git checkout -b test7.a branch1 && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod ) && + rmdir submod && mv submod-movedaside submod && + test "$(cat submod/bar)" = "branch1 submodule" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping module" && + + mv submod submod-movedaside && + git checkout -b test7.b test7 && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod ) && + git submodule update -N && + test "$(cat submod)" = "not a submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping file" && + + git checkout -b test7.c master && + rmdir submod && mv submod-movedaside submod && + test ! -e submod.orig && + git submodule update -N && + test_must_fail git merge test7 && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "r" | git mergetool submod ) && + test -d submod.orig && + git submodule update -N && + test "$(cat submod)" = "not a submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping file" && + + git checkout -b test7.d master && + rmdir submod && mv submod.orig submod && + git submodule update -N && + test_must_fail git merge test7 && + test -n "$(git ls-files -u)" && + ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) && + ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && + ( yes "l" | git mergetool submod ) && + test "$(cat submod/bar)" = "master submodule" && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + output="$(git mergetool --no-prompt)" && + test "$output" = "No files need merging" && + git commit -m "Merge resolved by keeping module" +' + +test_expect_success 'submodule in subdirectory' ' + git checkout -b test10 branch1 && + git submodule update -N && + ( + cd subdir && + test_create_repo subdir_module && + ( + cd subdir_module && + : >file15 && + git add file15 && + git commit -m "add initial versions" + ) + ) && + git submodule add git://example.com/subsubmodule subdir/subdir_module && + git add subdir/subdir_module && + git commit -m "add submodule in subdirectory" && + + git checkout -b test10.a test10 && + git submodule update -N && + ( + cd subdir/subdir_module && + git checkout -b super10.a && + echo test10.a >file15 && + git add file15 && + git commit -m "on branch 10.a" + ) && + git add subdir/subdir_module && + git commit -m "change submodule in subdirectory on test10.a" && + + git checkout -b test10.b test10 && + git submodule update -N && + ( + cd subdir/subdir_module && + git checkout -b super10.b && + echo test10.b >file15 && + git add file15 && + git commit -m "on branch 10.b" + ) && + git add subdir/subdir_module && + git commit -m "change submodule in subdirectory on test10.b" && + + test_must_fail git merge test10.a >/dev/null 2>&1 && + ( + cd subdir && + ( yes "l" | git mergetool subdir_module ) + ) && + test "$(cat subdir/subdir_module/file15)" = "test10.b" && + git submodule update -N && + test "$(cat subdir/subdir_module/file15)" = "test10.b" && + git reset --hard && + git submodule update -N && + + test_must_fail git merge test10.a >/dev/null 2>&1 && + ( yes "r" | git mergetool subdir/subdir_module ) && + test "$(cat subdir/subdir_module/file15)" = "test10.b" && + git submodule update -N && + test "$(cat subdir/subdir_module/file15)" = "test10.a" && + git commit -m "branch1 resolved with mergetool" && + rm -rf subdir/subdir_module +' + +test_expect_success 'directory vs modified submodule' ' + git checkout -b test11 branch1 && + mv submod submod-movedaside && + git rm submod && + mkdir submod && + echo not a submodule >submod/file16 && + git add submod/file16 && + git commit -m "Submodule path becomes directory" && + + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + ( yes "l" | git mergetool submod ) && + test "$(cat submod/file16)" = "not a submodule" && + rm -rf submod.orig && + + git reset --hard && + test_must_fail git merge master && + test -n "$(git ls-files -u)" && + test ! -e submod.orig && + ( yes "r" | git mergetool submod ) && + test -d submod.orig && + test "$(cat submod.orig/file16)" = "not a submodule" && + rm -r submod.orig && + mv submod-movedaside/.git submod && + ( cd submod && git clean -f && git reset --hard ) && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + git reset --hard && rm -rf submod-movedaside && + + git checkout -b test11.c master && + git submodule update -N && + test_must_fail git merge test11 && + test -n "$(git ls-files -u)" && + ( yes "l" | git mergetool submod ) && + git submodule update -N && + test "$(cat submod/bar)" = "master submodule" && + + git reset --hard && + git submodule update -N && + test_must_fail git merge test11 && + test -n "$(git ls-files -u)" && + test ! -e submod.orig && + ( yes "r" | git mergetool submod ) && + test "$(cat submod/file16)" = "not a submodule" && + + git reset --hard master && + ( cd submod && git clean -f && git reset --hard ) && + git submodule update -N +' + test_done diff --git a/t/t7611-merge-abort.sh b/t/t7611-merge-abort.sh index 61890bc892..7b4798e8e4 100755 --- a/t/t7611-merge-abort.sh +++ b/t/t7611-merge-abort.sh @@ -47,7 +47,10 @@ pre_merge_head="$(git rev-parse HEAD)" test_expect_success 'fails without MERGE_HEAD (unstarted merge)' ' test_must_fail git merge --abort 2>output && - grep -q MERGE_HEAD output && + test_i18ngrep MERGE_HEAD output +' + +test_expect_success 'fails without MERGE_HEAD (unstarted merge): .git/MERGE_HEAD sanity' ' test ! -f .git/MERGE_HEAD && test "$pre_merge_head" = "$(git rev-parse HEAD)" ' @@ -58,7 +61,10 @@ test_expect_success 'fails without MERGE_HEAD (completed merge)' ' # Merge successfully completed post_merge_head="$(git rev-parse HEAD)" && test_must_fail git merge --abort 2>output && - grep -q MERGE_HEAD output && + test_i18ngrep MERGE_HEAD output +' + +test_expect_success 'fails without MERGE_HEAD (completed merge): .git/MERGE_HEAD sanity' ' test ! -f .git/MERGE_HEAD && test "$post_merge_head" = "$(git rev-parse HEAD)" ' diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index c8777589ca..8184c264cf 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -59,7 +59,29 @@ do echo ${HC}file:4:foo mmap bar_mmap echo ${HC}file:5:foo_mmap bar mmap baz } >expected && - git grep -n -w -e mmap $H >actual && + git -c grep.linenumber=false grep -n -w -e mmap $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep -w $L" ' + { + echo ${HC}file:1:foo mmap bar + echo ${HC}file:3:foo_mmap bar mmap + echo ${HC}file:4:foo mmap bar_mmap + echo ${HC}file:5:foo_mmap bar mmap baz + } >expected && + git -c grep.linenumber=true grep -w -e mmap $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep -w $L" ' + { + echo ${HC}file:foo mmap bar + echo ${HC}file:foo_mmap bar mmap + echo ${HC}file:foo mmap bar_mmap + echo ${HC}file:foo_mmap bar mmap baz + } >expected && + git -c grep.linenumber=true grep --no-line-number -w -e mmap $H >actual && test_cmp expected actual ' @@ -182,6 +204,24 @@ do test_cmp expected actual ' + test_expect_success "grep --max-depth 0 -- . t $L" ' + { + echo ${HC}t/v:1:vvv + echo ${HC}v:1:vvv + } >expected && + git grep --max-depth 0 -n -e vvv $H -- . t >actual && + test_cmp expected actual + ' + + test_expect_success "grep --max-depth 0 -- t . $L" ' + { + echo ${HC}t/v:1:vvv + echo ${HC}v:1:vvv + } >expected && + git grep --max-depth 0 -n -e vvv $H -- t . >actual && + test_cmp expected actual + ' + done cat >expected <<EOF @@ -285,6 +325,11 @@ test_expect_success 'grep -f, ignore empty lines' ' test_cmp expected actual ' +test_expect_success 'grep -f, ignore empty lines, read patterns from stdin' ' + git grep -f - <patterns >actual && + test_cmp expected actual +' + cat >expected <<EOF y:y yy -- diff --git a/t/t7811-grep-open.sh b/t/t7811-grep-open.sh index 568a6f2b69..a8957782cf 100755 --- a/t/t7811-grep-open.sh +++ b/t/t7811-grep-open.sh @@ -63,7 +63,7 @@ test_expect_success SIMPLEPAGER 'git grep -O' ' test_expect_success 'git grep -O --cached' ' test_must_fail git grep --cached -O GREP_PATTERN >out 2>msg && - grep open-files-in-pager msg + test_i18ngrep open-files-in-pager msg ' test_expect_success 'git grep -O --no-index' ' diff --git a/t/t8002-blame.sh b/t/t8002-blame.sh index d3a51e1269..e2896cffc1 100755 --- a/t/t8002-blame.sh +++ b/t/t8002-blame.sh @@ -8,7 +8,7 @@ PROG='git blame -c' PROG='git blame -c -e' test_expect_success 'Blame --show-email works' ' - check_count "<A@test.git>" 1 "<B@test.git>" 1 "<B1@test.git>" 1 "<B2@test.git>" 1 "<author@example.com>" 1 "<C@test.git>" 1 "<D@test.git>" 1 + check_count "<A@test.git>" 1 "<B@test.git>" 1 "<B1@test.git>" 1 "<B2@test.git>" 1 "<author@example.com>" 1 "<C@test.git>" 1 "<D@test.git>" 1 "<E at test dot git>" 1 ' test_done diff --git a/t/t9010-svn-fe.sh b/t/t9010-svn-fe.sh index 88a9751dd3..6f6175a8f7 100755 --- a/t/t9010-svn-fe.sh +++ b/t/t9010-svn-fe.sh @@ -9,6 +9,30 @@ reinit_git () { git init } +properties () { + while test "$#" -ne 0 + do + property="$1" && + value="$2" && + printf "%s\n" "K ${#property}" && + printf "%s\n" "$property" && + printf "%s\n" "V ${#value}" && + printf "%s\n" "$value" && + shift 2 || + return 1 + done +} + +text_no_props () { + text="$1 +" && + printf "%s\n" "Prop-content-length: 10" && + printf "%s\n" "Text-content-length: ${#text}" && + printf "%s\n" "Content-length: $((${#text} + 10))" && + printf "%s\n" "" "PROPS-END" && + printf "%s\n" "$text" +} + >empty test_expect_success 'empty dump' ' @@ -18,13 +42,794 @@ test_expect_success 'empty dump' ' git fast-import <stream ' -test_expect_success 'v3 dumps not supported' ' +test_expect_success 'v4 dumps not supported' ' reinit_git && - echo "SVN-fs-dump-format-version: 3" >input && - test_must_fail test-svn-fe input >stream && + echo "SVN-fs-dump-format-version: 4" >v4.dump && + test_must_fail test-svn-fe v4.dump >stream && test_cmp empty stream ' +test_expect_failure 'empty revision' ' + reinit_git && + printf "rev <nobody, nobody@local>: %s\n" "" "" >expect && + cat >emptyrev.dump <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 0 + Content-length: 0 + + Revision-number: 2 + Prop-content-length: 0 + Content-length: 0 + + EOF + test-svn-fe emptyrev.dump >stream && + git fast-import <stream && + git log -p --format="rev <%an, %ae>: %s" HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'empty properties' ' + reinit_git && + printf "rev <nobody, nobody@local>: %s\n" "" "" >expect && + cat >emptyprop.dump <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Revision-number: 2 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + EOF + test-svn-fe emptyprop.dump >stream && + git fast-import <stream && + git log -p --format="rev <%an, %ae>: %s" HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'author name and commit message' ' + reinit_git && + echo "<author@example.com, author@example.com@local>" >expect.author && + cat >message <<-\EOF && + A concise summary of the change + + A detailed description of the change, why it is needed, what + was broken and why applying this is the best course of action. + + * file.c + Details pertaining to an individual file. + EOF + { + properties \ + svn:author author@example.com \ + svn:log "$(cat message)" && + echo PROPS-END + } >props && + { + echo "SVN-fs-dump-format-version: 3" && + echo && + echo "Revision-number: 1" && + echo Prop-content-length: $(wc -c <props) && + echo Content-length: $(wc -c <props) && + echo && + cat props + } >log.dump && + test-svn-fe log.dump >stream && + git fast-import <stream && + git log -p --format="%B" HEAD >actual.log && + git log --format="<%an, %ae>" >actual.author && + test_cmp message actual.log && + test_cmp expect.author actual.author +' + +test_expect_success 'unsupported properties are ignored' ' + reinit_git && + echo author >expect && + cat >extraprop.dump <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 56 + Content-length: 56 + + K 8 + nonsense + V 1 + y + K 10 + svn:author + V 6 + author + PROPS-END + EOF + test-svn-fe extraprop.dump >stream && + git fast-import <stream && + git log -p --format=%an HEAD >actual && + test_cmp expect actual +' + +test_expect_failure 'timestamp and empty file' ' + echo author@example.com >expect.author && + echo 1999-01-01 >expect.date && + echo file >expect.files && + reinit_git && + { + properties \ + svn:author author@example.com \ + svn:date "1999-01-01T00:01:002.000000Z" \ + svn:log "add empty file" && + echo PROPS-END + } >props && + { + cat <<-EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + EOF + echo Prop-content-length: $(wc -c <props) && + echo Content-length: $(wc -c <props) && + echo && + cat props && + cat <<-\EOF + + Node-path: empty-file + Node-kind: file + Node-action: add + Content-length: 0 + + EOF + } >emptyfile.dump && + test-svn-fe emptyfile.dump >stream && + git fast-import <stream && + git log --format=%an HEAD >actual.author && + git log --date=short --format=%ad HEAD >actual.date && + git ls-tree -r --name-only HEAD >actual.files && + test_cmp expect.author actual.author && + test_cmp expect.date actual.date && + test_cmp expect.files actual.files && + git checkout HEAD empty-file && + test_cmp empty file +' + +test_expect_success 'directory with files' ' + reinit_git && + printf "%s\n" directory/file1 directory/file2 >expect.files && + echo hi >hi && + echo hello >hello && + { + properties \ + svn:author author@example.com \ + svn:date "1999-02-01T00:01:002.000000Z" \ + svn:log "add directory with some files in it" && + echo PROPS-END + } >props && + { + cat <<-EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + EOF + echo Prop-content-length: $(wc -c <props) && + echo Content-length: $(wc -c <props) && + echo && + cat props && + cat <<-\EOF && + + Node-path: directory + Node-kind: dir + Node-action: add + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: directory/file1 + Node-kind: file + Node-action: add + EOF + text_no_props hello && + cat <<-\EOF && + Node-path: directory/file2 + Node-kind: file + Node-action: add + EOF + text_no_props hi + } >directory.dump && + test-svn-fe directory.dump >stream && + git fast-import <stream && + + git ls-tree -r --name-only HEAD >actual.files && + git checkout HEAD directory && + test_cmp expect.files actual.files && + test_cmp hello directory/file1 && + test_cmp hi directory/file2 +' + +test_expect_success 'node without action' ' + cat >inaction.dump <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: directory + Node-kind: dir + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + EOF + test_must_fail test-svn-fe inaction.dump +' + +test_expect_success 'action: add node without text' ' + cat >textless.dump <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: textless + Node-kind: file + Node-action: add + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + EOF + test_must_fail test-svn-fe textless.dump +' + +test_expect_failure 'change file mode but keep old content' ' + reinit_git && + cat >expect <<-\EOF && + OBJID + :120000 100644 OBJID OBJID T greeting + OBJID + :100644 120000 OBJID OBJID T greeting + OBJID + :000000 100644 OBJID OBJID A greeting + EOF + echo "link hello" >expect.blob && + echo hello >hello && + cat >filemode.dump <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: greeting + Node-kind: file + Node-action: add + Prop-content-length: 10 + Text-content-length: 11 + Content-length: 21 + + PROPS-END + link hello + + Revision-number: 2 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: greeting + Node-kind: file + Node-action: change + Prop-content-length: 33 + Content-length: 33 + + K 11 + svn:special + V 1 + * + PROPS-END + + Revision-number: 3 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: greeting + Node-kind: file + Node-action: change + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + EOF + test-svn-fe filemode.dump >stream && + git fast-import <stream && + { + git rev-list HEAD | + git diff-tree --root --stdin | + sed "s/$_x40/OBJID/g" + } >actual && + git show HEAD:greeting >actual.blob && + git show HEAD^:greeting >actual.target && + test_cmp expect actual && + test_cmp expect.blob actual.blob && + test_cmp hello actual.target +' + +test_expect_success 'NUL in property value' ' + reinit_git && + echo "commit message" >expect.message && + { + properties \ + unimportant "something with a NUL (Q)" \ + svn:log "commit message"&& + echo PROPS-END + } | + q_to_nul >props && + { + cat <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + EOF + echo Prop-content-length: $(wc -c <props) && + echo Content-length: $(wc -c <props) && + echo && + cat props + } >nulprop.dump && + test-svn-fe nulprop.dump >stream && + git fast-import <stream && + git diff-tree --always -s --format=%s HEAD >actual.message && + test_cmp expect.message actual.message +' + +test_expect_success 'NUL in log message, file content, and property name' ' + # Caveat: svnadmin 1.6.16 (r1073529) truncates at \0 in the + # svn:specialQnotreally example. + reinit_git && + cat >expect <<-\EOF && + OBJID + :100644 100644 OBJID OBJID M greeting + OBJID + :000000 100644 OBJID OBJID A greeting + EOF + printf "\n%s\n" "something with an ASCII NUL (Q)" >expect.message && + printf "%s\n" "helQo" >expect.hello1 && + printf "%s\n" "link hello" >expect.hello2 && + { + properties svn:log "something with an ASCII NUL (Q)" && + echo PROPS-END + } | + q_to_nul >props && + { + q_to_nul <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: greeting + Node-kind: file + Node-action: add + Prop-content-length: 10 + Text-content-length: 6 + Content-length: 16 + + PROPS-END + helQo + + Revision-number: 2 + EOF + echo Prop-content-length: $(wc -c <props) && + echo Content-length: $(wc -c <props) && + echo && + cat props && + q_to_nul <<-\EOF + + Node-path: greeting + Node-kind: file + Node-action: change + Prop-content-length: 43 + Text-content-length: 11 + Content-length: 54 + + K 21 + svn:specialQnotreally + V 1 + * + PROPS-END + link hello + EOF + } >8bitclean.dump && + test-svn-fe 8bitclean.dump >stream && + git fast-import <stream && + { + git rev-list HEAD | + git diff-tree --root --stdin | + sed "s/$_x40/OBJID/g" + } >actual && + { + git cat-file commit HEAD | nul_to_q && + echo + } | + sed -ne "/^\$/,\$ p" >actual.message && + git cat-file blob HEAD^:greeting | nul_to_q >actual.hello1 && + git cat-file blob HEAD:greeting | nul_to_q >actual.hello2 && + test_cmp expect actual && + test_cmp expect.message actual.message && + test_cmp expect.hello1 actual.hello1 && + test_cmp expect.hello2 actual.hello2 +' + +test_expect_success 'change file mode and reiterate content' ' + reinit_git && + cat >expect <<-\EOF && + OBJID + :120000 100644 OBJID OBJID T greeting + OBJID + :100644 120000 OBJID OBJID T greeting + OBJID + :000000 100644 OBJID OBJID A greeting + EOF + echo "link hello" >expect.blob && + echo hello >hello && + cat >filemode.dump <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: greeting + Node-kind: file + Node-action: add + Prop-content-length: 10 + Text-content-length: 11 + Content-length: 21 + + PROPS-END + link hello + + Revision-number: 2 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: greeting + Node-kind: file + Node-action: change + Prop-content-length: 33 + Text-content-length: 11 + Content-length: 44 + + K 11 + svn:special + V 1 + * + PROPS-END + link hello + + Revision-number: 3 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: greeting + Node-kind: file + Node-action: change + Prop-content-length: 10 + Text-content-length: 11 + Content-length: 21 + + PROPS-END + link hello + EOF + test-svn-fe filemode.dump >stream && + git fast-import <stream && + { + git rev-list HEAD | + git diff-tree --root --stdin | + sed "s/$_x40/OBJID/g" + } >actual && + git show HEAD:greeting >actual.blob && + git show HEAD^:greeting >actual.target && + test_cmp expect actual && + test_cmp expect.blob actual.blob && + test_cmp hello actual.target +' + +test_expect_success 'deltas not supported' ' + { + # (old) h + (inline) ello + (old) \n + printf "SVNQ%b%b%s" "Q\003\006\005\004" "\001Q\0204\001\002" "ello" | + q_to_nul + } >delta && + { + properties \ + svn:author author@example.com \ + svn:date "1999-01-05T00:01:002.000000Z" \ + svn:log "add greeting" && + echo PROPS-END + } >props && + { + properties \ + svn:author author@example.com \ + svn:date "1999-01-06T00:01:002.000000Z" \ + svn:log "change it" && + echo PROPS-END + } >props2 && + { + echo SVN-fs-dump-format-version: 3 && + echo && + echo Revision-number: 1 && + echo Prop-content-length: $(wc -c <props) && + echo Content-length: $(wc -c <props) && + echo && + cat props && + cat <<-\EOF && + + Node-path: hello + Node-kind: file + Node-action: add + Prop-content-length: 10 + Text-content-length: 3 + Content-length: 13 + + PROPS-END + hi + + EOF + echo Revision-number: 2 && + echo Prop-content-length: $(wc -c <props2) && + echo Content-length: $(wc -c <props2) && + echo && + cat props2 && + cat <<-\EOF && + + Node-path: hello + Node-kind: file + Node-action: change + Text-delta: true + Prop-content-length: 10 + EOF + echo Text-content-length: $(wc -c <delta) && + echo Content-length: $((10 + $(wc -c <delta))) && + echo && + echo PROPS-END && + cat delta + } >delta.dump && + test_must_fail test-svn-fe delta.dump +' + +test_expect_success 'property deltas supported' ' + reinit_git && + cat >expect <<-\EOF && + OBJID + :100755 100644 OBJID OBJID M script.sh + EOF + { + properties \ + svn:author author@example.com \ + svn:date "1999-03-06T00:01:002.000000Z" \ + svn:log "make an executable, or chmod -x it" && + echo PROPS-END + } >revprops && + { + echo SVN-fs-dump-format-version: 3 && + echo && + echo Revision-number: 1 && + echo Prop-content-length: $(wc -c <revprops) && + echo Content-length: $(wc -c <revprops) && + echo && + cat revprops && + echo && + cat <<-\EOF && + Node-path: script.sh + Node-kind: file + Node-action: add + Text-content-length: 0 + Prop-content-length: 39 + Content-length: 39 + + K 14 + svn:executable + V 4 + true + PROPS-END + + EOF + echo Revision-number: 2 && + echo Prop-content-length: $(wc -c <revprops) && + echo Content-length: $(wc -c <revprops) && + echo && + cat revprops && + echo && + cat <<-\EOF + Node-path: script.sh + Node-kind: file + Node-action: change + Prop-delta: true + Prop-content-length: 30 + Content-length: 30 + + D 14 + svn:executable + PROPS-END + EOF + } >propdelta.dump && + test-svn-fe propdelta.dump >stream && + git fast-import <stream && + { + git rev-list HEAD | + git diff-tree --stdin | + sed "s/$_x40/OBJID/g" + } >actual && + test_cmp expect actual +' + +test_expect_success 'properties on /' ' + reinit_git && + cat <<-\EOF >expect && + OBJID + OBJID + :000000 100644 OBJID OBJID A greeting + EOF + sed -e "s/X$//" <<-\EOF >changeroot.dump && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: greeting + Node-kind: file + Node-action: add + Text-content-length: 0 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Revision-number: 2 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: X + Node-kind: dir + Node-action: change + Prop-delta: true + Prop-content-length: 43 + Content-length: 43 + + K 10 + svn:ignore + V 11 + build-area + + PROPS-END + EOF + test-svn-fe changeroot.dump >stream && + git fast-import <stream && + { + git rev-list HEAD | + git diff-tree --root --always --stdin | + sed "s/$_x40/OBJID/g" + } >actual && + test_cmp expect actual +' + +test_expect_success 'deltas for typechange' ' + reinit_git && + cat >expect <<-\EOF && + OBJID + :120000 100644 OBJID OBJID T test-file + OBJID + :100755 120000 OBJID OBJID T test-file + OBJID + :000000 100755 OBJID OBJID A test-file + EOF + cat >deleteprop.dump <<-\EOF && + SVN-fs-dump-format-version: 3 + + Revision-number: 1 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: test-file + Node-kind: file + Node-action: add + Prop-delta: true + Prop-content-length: 35 + Text-content-length: 17 + Content-length: 52 + + K 14 + svn:executable + V 0 + + PROPS-END + link testing 123 + + Revision-number: 2 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: test-file + Node-kind: file + Node-action: change + Prop-delta: true + Prop-content-length: 53 + Text-content-length: 17 + Content-length: 70 + + K 11 + svn:special + V 1 + * + D 14 + svn:executable + PROPS-END + link testing 231 + + Revision-number: 3 + Prop-content-length: 10 + Content-length: 10 + + PROPS-END + + Node-path: test-file + Node-kind: file + Node-action: change + Prop-delta: true + Prop-content-length: 27 + Text-content-length: 17 + Content-length: 44 + + D 11 + svn:special + PROPS-END + link testing 321 + EOF + test-svn-fe deleteprop.dump >stream && + git fast-import <stream && + { + git rev-list HEAD | + git diff-tree --root --stdin | + sed "s/$_x40/OBJID/g" + } >actual && + test_cmp expect actual +' + + test_expect_success 'set up svn repo' ' svnconf=$PWD/svnconf && mkdir -p "$svnconf" && diff --git a/t/t9116-git-svn-log.sh b/t/t9116-git-svn-log.sh index 5d477e4bda..cf4c05261b 100755 --- a/t/t9116-git-svn-log.sh +++ b/t/t9116-git-svn-log.sh @@ -60,6 +60,21 @@ test_expect_success 'test ascending revision range' " git svn log -r 1:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2-r4 - " +test_expect_success 'test ascending revision range with --show-commit' " + git reset --hard trunk && + git svn log --show-commit -r 1:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2-r4 - + " + +test_expect_success 'test ascending revision range with --show-commit (sha1)' " + git svn find-rev r1 >expected-range-r1-r2-r4-sha1 && + git svn find-rev r2 >>expected-range-r1-r2-r4-sha1 && + git svn find-rev r4 >>expected-range-r1-r2-r4-sha1 && + git reset --hard trunk && + git svn log --show-commit -r 1:4 | grep '^r[0-9]' | cut -d'|' -f2 >out && + git rev-parse \$(cat out) >actual && + test_cmp expected-range-r1-r2-r4-sha1 actual + " + printf 'r4 \nr2 \nr1 \n' > expected-range-r4-r2-r1 test_expect_success 'test descending revision range' " diff --git a/t/t9130-git-svn-authors-file.sh b/t/t9130-git-svn-authors-file.sh index ec0a106614..b324c491c5 100755 --- a/t/t9130-git-svn-authors-file.sh +++ b/t/t9130-git-svn-authors-file.sh @@ -96,7 +96,6 @@ test_expect_success 'fresh clone with svn.authors-file in config' ' rm -r "$GIT_DIR" && test x = x"$(git config svn.authorsfile)" && test_config="$HOME"/.gitconfig && - unset GIT_CONFIG_NOGLOBAL && unset GIT_DIR && unset GIT_CONFIG && git config --global \ diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 986bc14d58..6b1ba6c858 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -42,6 +42,14 @@ echo "$@"' >empty +test_expect_success 'setup: have pipes?' ' + rm -f frob && + if mkfifo frob + then + test_set_prereq PIPE + fi +' + ### ### series A ### @@ -898,6 +906,77 @@ test_expect_success \ git diff-tree -C --find-copies-harder -r N4^ N4 >actual && compare_diff_raw expect actual' +test_expect_success PIPE 'N: read and copy directory' ' + cat >expect <<-\EOF + :100755 100755 f1fb5da718392694d0076d677d6d0e364c79b0bc f1fb5da718392694d0076d677d6d0e364c79b0bc C100 file2/newf file3/newf + :100644 100644 7123f7f44e39be127c5eb701e5968176ee9d78b1 7123f7f44e39be127c5eb701e5968176ee9d78b1 C100 file2/oldf file3/oldf + EOF + git update-ref -d refs/heads/N4 && + rm -f backflow && + mkfifo backflow && + ( + exec <backflow && + cat <<-EOF && + commit refs/heads/N4 + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + copy by tree hash, part 2 + COMMIT + + from refs/heads/branch^0 + ls "file2" + EOF + read mode type tree filename && + echo "M 040000 $tree file3" + ) | + git fast-import --cat-blob-fd=3 3>backflow && + git diff-tree -C --find-copies-harder -r N4^ N4 >actual && + compare_diff_raw expect actual +' + +test_expect_success PIPE 'N: empty directory reads as missing' ' + cat <<-\EOF >expect && + OBJNAME + :000000 100644 OBJNAME OBJNAME A unrelated + EOF + echo "missing src" >expect.response && + git update-ref -d refs/heads/read-empty && + rm -f backflow && + mkfifo backflow && + ( + exec <backflow && + cat <<-EOF && + commit refs/heads/read-empty + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + read "empty" (missing) directory + COMMIT + + M 100644 inline src/greeting + data <<BLOB + hello + BLOB + C src/greeting dst1/non-greeting + C src/greeting unrelated + # leave behind "empty" src directory + D src/greeting + ls "src" + EOF + read -r line && + printf "%s\n" "$line" >response && + cat <<-\EOF + D dst1 + D dst2 + EOF + ) | + git fast-import --cat-blob-fd=3 3>backflow && + test_cmp expect.response response && + git rev-list read-empty | + git diff-tree -r --root --stdin | + sed "s/$_x40/OBJNAME/g" >actual && + test_cmp expect actual +' + test_expect_success \ 'N: copy root directory by tree hash' \ 'cat >expect <<-\EOF && @@ -1748,6 +1827,61 @@ test_expect_success \ 'cat input | git fast-import --export-marks=other.marks && grep :1 other.marks' +test_expect_success 'R: catch typo in marks file name' ' + test_must_fail git fast-import --import-marks=nonexistent.marks </dev/null && + echo "feature import-marks=nonexistent.marks" | + test_must_fail git fast-import +' + +test_expect_success 'R: import and output marks can be the same file' ' + rm -f io.marks && + blob=$(echo hi | git hash-object --stdin) && + cat >expect <<-EOF && + :1 $blob + :2 $blob + EOF + git fast-import --export-marks=io.marks <<-\EOF && + blob + mark :1 + data 3 + hi + + EOF + git fast-import --import-marks=io.marks --export-marks=io.marks <<-\EOF && + blob + mark :2 + data 3 + hi + + EOF + test_cmp expect io.marks +' + +test_expect_success 'R: --import-marks=foo --output-marks=foo to create foo fails' ' + rm -f io.marks && + test_must_fail git fast-import --import-marks=io.marks --export-marks=io.marks <<-\EOF + blob + mark :1 + data 3 + hi + + EOF +' + +test_expect_success 'R: --import-marks-if-exists' ' + rm -f io.marks && + blob=$(echo hi | git hash-object --stdin) && + echo ":1 $blob" >expect && + git fast-import --import-marks-if-exists=io.marks --export-marks=io.marks <<-\EOF && + blob + mark :1 + data 3 + hi + + EOF + test_cmp expect io.marks +' + cat >input << EOF feature import-marks=marks.out feature export-marks=marks.new @@ -1806,6 +1940,11 @@ test_expect_success 'R: feature no-relative-marks should be honoured' ' test_cmp marks.new non-relative.out ' +test_expect_success 'R: feature ls supported' ' + echo "feature ls" | + git fast-import +' + test_expect_success 'R: feature cat-blob supported' ' echo "feature cat-blob" | git fast-import @@ -1931,14 +2070,6 @@ test_expect_success 'R: print two blobs to stdout' ' test_cmp expect actual ' -test_expect_success 'setup: have pipes?' ' - rm -f frob && - if mkfifo frob - then - test_set_prereq PIPE - fi -' - test_expect_success PIPE 'R: copy using cat-file' ' expect_id=$(git hash-object big) && expect_len=$(wc -c <big) && diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index 35c151d7ea..afac5b56a8 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -446,6 +446,8 @@ test_expect_success \ test_expect_success \ 'encode(commit): utf8' \ '. "$TEST_DIRECTORY"/t3901-utf8.txt && + test_when_finished "GIT_AUTHOR_NAME=\"A U Thor\"" && + test_when_finished "GIT_COMMITTER_NAME=\"C O Mitter\"" && echo "UTF-8" >> file && git add file && git commit -F "$TEST_DIRECTORY"/t3900/1-UTF-8.txt && @@ -454,11 +456,13 @@ test_expect_success \ test_expect_success \ 'encode(commit): iso-8859-1' \ '. "$TEST_DIRECTORY"/t3901-8859-1.txt && + test_when_finished "GIT_AUTHOR_NAME=\"A U Thor\"" && + test_when_finished "GIT_COMMITTER_NAME=\"C O Mitter\"" && echo "ISO-8859-1" >> file && git add file && git config i18n.commitencoding ISO-8859-1 && + test_when_finished "git config --unset i18n.commitencoding" && git commit -F "$TEST_DIRECTORY"/t3900/ISO8859-1.txt && - git config --unset i18n.commitencoding && gitweb_run "p=.git;a=commit"' test_expect_success \ diff --git a/t/t9800-git-p4.sh b/t/t9800-git-p4.sh new file mode 100755 index 0000000000..a523473954 --- /dev/null +++ b/t/t9800-git-p4.sh @@ -0,0 +1,139 @@ +#!/bin/sh + +test_description='git-p4 tests' + +. ./test-lib.sh + +( p4 -h && p4d -h ) >/dev/null 2>&1 || { + skip_all='skipping git-p4 tests; no p4 or p4d' + test_done +} + +GITP4=$GIT_BUILD_DIR/contrib/fast-import/git-p4 +P4DPORT=10669 + +db="$TRASH_DIRECTORY/db" +cli="$TRASH_DIRECTORY/cli" +git="$TRASH_DIRECTORY/git" + +test_debug 'echo p4d -q -d -r "$db" -p $P4DPORT' +test_expect_success setup ' + mkdir -p "$db" && + p4d -q -d -r "$db" -p $P4DPORT && + mkdir -p "$cli" && + mkdir -p "$git" && + export P4PORT=localhost:$P4DPORT +' + +test_expect_success 'add p4 files' ' + cd "$cli" && + p4 client -i <<-EOF && + Client: client + Description: client + Root: $cli + View: //depot/... //client/... + EOF + export P4CLIENT=client && + echo file1 >file1 && + p4 add file1 && + p4 submit -d "file1" && + echo file2 >file2 && + p4 add file2 && + p4 submit -d "file2" && + cd "$TRASH_DIRECTORY" +' + +test_expect_success 'basic git-p4 clone' ' + "$GITP4" clone --dest="$git" //depot && + cd "$git" && + git log --oneline >lines && + test_line_count = 1 lines && + cd .. && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'git-p4 clone @all' ' + "$GITP4" clone --dest="$git" //depot@all && + cd "$git" && + git log --oneline >lines && + test_line_count = 2 lines && + cd .. && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'git-p4 sync uninitialized repo' ' + test_create_repo "$git" && + cd "$git" && + test_must_fail "$GITP4" sync && + rm -rf "$git" && mkdir "$git" +' + +# +# Create a git repo by hand. Add a commit so that HEAD is valid. +# Test imports a new p4 repository into a new git branch. +# +test_expect_success 'git-p4 sync new branch' ' + test_create_repo "$git" && + cd "$git" && + test_commit head && + "$GITP4" sync --branch=refs/remotes/p4/depot //depot@all && + git log --oneline p4/depot >lines && + cat lines && + test_line_count = 2 lines && + cd .. && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'exit when p4 fails to produce marshaled output' ' + badp4dir="$TRASH_DIRECTORY/badp4dir" && + mkdir -p "$badp4dir" && + cat >"$badp4dir"/p4 <<-EOF && + #!$SHELL_PATH + exit 1 + EOF + chmod 755 "$badp4dir"/p4 && + PATH="$badp4dir:$PATH" "$GITP4" clone --dest="$git" //depot >errs 2>&1 ; retval=$? && + test $retval -eq 1 && + test_must_fail grep -q Traceback errs +' + +test_expect_success 'add p4 files with wildcards in the names' ' + cd "$cli" && + echo file-wild-hash >file-wild#hash && + echo file-wild-star >file-wild\*star && + echo file-wild-at >file-wild@at && + echo file-wild-percent >file-wild%percent && + p4 add -f file-wild* && + p4 submit -d "file wildcards" && + cd "$TRASH_DIRECTORY" +' + +test_expect_success 'wildcard files git-p4 clone' ' + "$GITP4" clone --dest="$git" //depot && + cd "$git" && + test -f file-wild#hash && + test -f file-wild\*star && + test -f file-wild@at && + test -f file-wild%percent && + cd "$TRASH_DIRECTORY" && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'clone bare' ' + "$GITP4" clone --dest="$git" --bare //depot && + cd "$git" && + test ! -d .git && + bare=`git config --get core.bare` && + test "$bare" = true && + cd "$TRASH_DIRECTORY" && + rm -rf "$git" && mkdir "$git" +' + +test_expect_success 'shutdown' ' + pid=`pgrep -f p4d` && + test -n "$pid" && + test_debug "ps wl `echo $pid`" && + kill $pid +' + +test_done diff --git a/t/test-lib.sh b/t/test-lib.sh index c91e232437..875d05ed50 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -43,36 +43,25 @@ TERM=dumb export LANG LC_ALL PAGER TERM TZ EDITOR=: unset VISUAL -unset GIT_EDITOR -unset AUTHOR_DATE -unset AUTHOR_EMAIL -unset AUTHOR_NAME -unset COMMIT_AUTHOR_EMAIL -unset COMMIT_AUTHOR_NAME unset EMAIL -unset GIT_ALTERNATE_OBJECT_DIRECTORIES -unset GIT_AUTHOR_DATE +unset $(perl -e ' + my @env = keys %ENV; + my $ok = join("|", qw( + TRACE + DEBUG + USE_LOOKUP + TEST + .*_TEST + PROVE + VALGRIND + )); + my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); + print join("\n", @vars); +') GIT_AUTHOR_EMAIL=author@example.com GIT_AUTHOR_NAME='A U Thor' -unset GIT_COMMITTER_DATE GIT_COMMITTER_EMAIL=committer@example.com GIT_COMMITTER_NAME='C O Mitter' -unset GIT_DIFF_OPTS -unset GIT_DIR -unset GIT_WORK_TREE -unset GIT_EXTERNAL_DIFF -unset GIT_INDEX_FILE -unset GIT_OBJECT_DIRECTORY -unset GIT_CEILING_DIRECTORIES -unset SHA1_FILE_DIRECTORIES -unset SHA1_FILE_DIRECTORY -unset GIT_NOTES_REF -unset GIT_NOTES_DISPLAY_REF -unset GIT_NOTES_REWRITE_REF -unset GIT_NOTES_REWRITE_MODE -unset GIT_REFLOG_ACTION -unset GIT_CHERRY_PICK_HELP -unset GIT_QUIET GIT_MERGE_VERBOSITY=5 export GIT_MERGE_VERBOSITY export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME @@ -100,6 +89,9 @@ esac _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' _x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05" +# Zero SHA-1 +_z40=0000000000000000000000000000000000000000 + # Each test should start with something like this, after copyright notices: # # test_description='Description of this test... @@ -454,9 +446,14 @@ test_debug () { test_run_ () { test_cleanup=: + expecting_failure=$2 eval >&3 2>&4 "$1" eval_ret=$? - eval >&3 2>&4 "$test_cleanup" + + if test -z "$immediate" || test $eval_ret = 0 || test -n "$expecting_failure" + then + eval >&3 2>&4 "$test_cleanup" + fi if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"; then echo "" fi @@ -505,7 +502,7 @@ test_expect_failure () { if ! test_skip "$@" then say >&3 "checking known breakage: $2" - test_run_ "$2" + test_run_ "$2" expecting_failure if [ "$?" = 0 -a "$eval_ret" = 0 ] then test_known_broken_ok_ "$1" @@ -783,6 +780,9 @@ test_cmp() { # # except that the greeting and config --unset must both succeed for # the test to pass. +# +# Note that under --immediate mode, no clean-up is done to help diagnose +# what went wrong. test_when_finished () { test_cleanup="{ $* @@ -954,8 +954,8 @@ fi GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt unset GIT_CONFIG GIT_CONFIG_NOSYSTEM=1 -GIT_CONFIG_NOGLOBAL=1 -export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_CONFIG_NOGLOBAL +GIT_ATTR_NOSYSTEM=1 +export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS @@ -1079,6 +1079,41 @@ esac test -z "$NO_PERL" && test_set_prereq PERL test -z "$NO_PYTHON" && test_set_prereq PYTHON +# Can we rely on git's output in the C locale? +if test -n "$GETTEXT_POISON" +then + GIT_GETTEXT_POISON=YesPlease + export GIT_GETTEXT_POISON +else + test_set_prereq C_LOCALE_OUTPUT +fi + +# Use this instead of test_cmp to compare files that contain expected and +# actual output from git commands that can be translated. When running +# under GETTEXT_POISON this pretends that the command produced expected +# results. +test_i18ncmp () { + test -n "$GETTEXT_POISON" || test_cmp "$@" +} + +# Use this instead of "grep expected-string actual" to see if the +# output from a git command that can be translated either contains an +# expected string, or does not contain an unwanted one. When running +# under GETTEXT_POISON this pretends that the command produced expected +# results. +test_i18ngrep () { + if test -n "$GETTEXT_POISON" + then + : # pretend success + elif test "x!" = "x$1" + then + shift + ! grep "$@" + else + grep "$@" + fi +} + # test whether the filesystem supports symbolic links ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS rm -f y |