diff options
Diffstat (limited to 't')
78 files changed, 2938 insertions, 817 deletions
@@ -84,9 +84,10 @@ appropriately before running "make". -x:: Turn on shell tracing (i.e., `set -x`) during the tests - themselves. Implies `--verbose`. Note that in non-bash shells, - this can cause failures in some tests which redirect and test - the output of shell functions. Use with caution. + themselves. Implies `--verbose`. + Ignored in test scripts that set the variable 'test_untraceable' + to a non-empty value, unless it's run with a Bash version + supporting BASH_XTRACEFD, i.e. v4.1 or later. -d:: --debug:: @@ -452,6 +453,22 @@ Don't: causing the next test to start in an unexpected directory. Do so inside a subshell if necessary. + - save and verify the standard error of compound commands, i.e. group + commands, subshells, and shell functions (except test helper + functions like 'test_must_fail') like this: + + ( cd dir && git cmd ) 2>error && + test_cmp expect error + + When running the test with '-x' tracing, then the trace of commands + executed in the compound command will be included in standard error + as well, quite possibly throwing off the subsequent checks examining + the output. Instead, save only the relevant git command's standard + error: + + ( cd dir && git cmd 2>../error ) && + test_cmp expect error + - Break the TAP output The raw output from your test may be interpreted by a TAP harness. TAP diff --git a/t/helper/test-dump-untracked-cache.c b/t/helper/test-dump-untracked-cache.c index f752532ffb..d7c55c2355 100644 --- a/t/helper/test-dump-untracked-cache.c +++ b/t/helper/test-dump-untracked-cache.c @@ -54,8 +54,8 @@ int cmd_main(int ac, const char **av) printf("no untracked cache\n"); return 0; } - printf("info/exclude %s\n", sha1_to_hex(uc->ss_info_exclude.sha1)); - printf("core.excludesfile %s\n", sha1_to_hex(uc->ss_excludes_file.sha1)); + printf("info/exclude %s\n", oid_to_hex(&uc->ss_info_exclude.oid)); + printf("core.excludesfile %s\n", oid_to_hex(&uc->ss_excludes_file.oid)); printf("exclude_per_dir %s\n", uc->exclude_per_dir); printf("flags %08x\n", uc->dir_flags); if (uc->root) diff --git a/t/helper/test-hashmap.c b/t/helper/test-hashmap.c index 1145d51671..9ae9281c07 100644 --- a/t/helper/test-hashmap.c +++ b/t/helper/test-hashmap.c @@ -1,5 +1,6 @@ #include "git-compat-util.h" #include "hashmap.h" +#include "strbuf.h" struct test_entry { @@ -29,11 +30,12 @@ static int test_entry_cmp(const void *cmp_data, return strcmp(e1->key, key ? key : e2->key); } -static struct test_entry *alloc_test_entry(int hash, char *key, int klen, - char *value, int vlen) +static struct test_entry *alloc_test_entry(unsigned int hash, + char *key, char *value) { - struct test_entry *entry = malloc(sizeof(struct test_entry) + klen - + vlen + 2); + size_t klen = strlen(key); + size_t vlen = strlen(value); + struct test_entry *entry = xmalloc(st_add4(sizeof(*entry), klen, vlen, 2)); hashmap_entry_init(entry, hash); memcpy(entry->key, key, klen + 1); memcpy(entry->key + klen + 1, value, vlen + 1); @@ -85,11 +87,11 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) unsigned int *hashes; unsigned int i, j; - entries = malloc(TEST_SIZE * sizeof(struct test_entry *)); - hashes = malloc(TEST_SIZE * sizeof(int)); + ALLOC_ARRAY(entries, TEST_SIZE); + ALLOC_ARRAY(hashes, TEST_SIZE); for (i = 0; i < TEST_SIZE; i++) { - snprintf(buf, sizeof(buf), "%i", i); - entries[i] = alloc_test_entry(0, buf, strlen(buf), "", 0); + xsnprintf(buf, sizeof(buf), "%i", i); + entries[i] = alloc_test_entry(0, buf, ""); hashes[i] = hash(method, i, entries[i]->key); } @@ -144,7 +146,7 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) */ int cmd_main(int argc, const char **argv) { - char line[1024]; + struct strbuf line = STRBUF_INIT; struct hashmap map; int icase; @@ -153,44 +155,42 @@ int cmd_main(int argc, const char **argv) hashmap_init(&map, test_entry_cmp, &icase, 0); /* process commands from stdin */ - while (fgets(line, sizeof(line), stdin)) { + while (strbuf_getline(&line, stdin) != EOF) { char *cmd, *p1 = NULL, *p2 = NULL; - int l1 = 0, l2 = 0, hash = 0; + unsigned int hash = 0; struct test_entry *entry; /* break line into command and up to two parameters */ - cmd = strtok(line, DELIM); + cmd = strtok(line.buf, DELIM); /* ignore empty lines */ if (!cmd || *cmd == '#') continue; p1 = strtok(NULL, DELIM); if (p1) { - l1 = strlen(p1); hash = icase ? strihash(p1) : strhash(p1); p2 = strtok(NULL, DELIM); - if (p2) - l2 = strlen(p2); } - if (!strcmp("hash", cmd) && l1) { + if (!strcmp("hash", cmd) && p1) { /* print results of different hash functions */ - printf("%u %u %u %u\n", strhash(p1), memhash(p1, l1), - strihash(p1), memihash(p1, l1)); + printf("%u %u %u %u\n", + strhash(p1), memhash(p1, strlen(p1)), + strihash(p1), memihash(p1, strlen(p1))); - } else if (!strcmp("add", cmd) && l1 && l2) { + } else if (!strcmp("add", cmd) && p1 && p2) { /* create entry with key = p1, value = p2 */ - entry = alloc_test_entry(hash, p1, l1, p2, l2); + entry = alloc_test_entry(hash, p1, p2); /* add to hashmap */ hashmap_add(&map, entry); - } else if (!strcmp("put", cmd) && l1 && l2) { + } else if (!strcmp("put", cmd) && p1 && p2) { /* create entry with key = p1, value = p2 */ - entry = alloc_test_entry(hash, p1, l1, p2, l2); + entry = alloc_test_entry(hash, p1, p2); /* add / replace entry */ entry = hashmap_put(&map, entry); @@ -199,7 +199,7 @@ int cmd_main(int argc, const char **argv) puts(entry ? get_value(entry) : "NULL"); free(entry); - } else if (!strcmp("get", cmd) && l1) { + } else if (!strcmp("get", cmd) && p1) { /* lookup entry in hashmap */ entry = hashmap_get_from_hash(&map, hash, p1); @@ -212,7 +212,7 @@ int cmd_main(int argc, const char **argv) entry = hashmap_get_next(&map, entry); } - } else if (!strcmp("remove", cmd) && l1) { + } else if (!strcmp("remove", cmd) && p1) { /* setup static key */ struct hashmap_entry key; @@ -238,7 +238,7 @@ int cmd_main(int argc, const char **argv) printf("%u %u\n", map.tablesize, hashmap_get_size(&map)); - } else if (!strcmp("intern", cmd) && l1) { + } else if (!strcmp("intern", cmd) && p1) { /* test that strintern works */ const char *i1 = strintern(p1); @@ -252,7 +252,7 @@ int cmd_main(int argc, const char **argv) else printf("%s\n", i1); - } else if (!strcmp("perfhashmap", cmd) && l1 && l2) { + } else if (!strcmp("perfhashmap", cmd) && p1 && p2) { perf_hashmap(atoi(p1), atoi(p2)); @@ -263,6 +263,7 @@ int cmd_main(int argc, const char **argv) } } + strbuf_release(&line); hashmap_free(&map, 1); return 0; } diff --git a/t/helper/test-run-command.c b/t/helper/test-run-command.c index d24d157379..153342e44d 100644 --- a/t/helper/test-run-command.c +++ b/t/helper/test-run-command.c @@ -56,6 +56,15 @@ int cmd_main(int argc, const char **argv) if (argc < 3) return 1; + while (!strcmp(argv[1], "env")) { + if (!argv[2]) + die("env specifier without a value"); + argv_array_push(&proc.env_array, argv[2]); + argv += 2; + argc -= 2; + } + if (argc < 3) + return 1; proc.argv = (const char **)argv + 2; if (!strcmp(argv[1], "start-command-ENOENT")) { diff --git a/t/helper/test-wildmatch.c b/t/helper/test-wildmatch.c index 921d7b3e7e..66d33dfcfd 100644 --- a/t/helper/test-wildmatch.c +++ b/t/helper/test-wildmatch.c @@ -16,6 +16,8 @@ int cmd_main(int argc, const char **argv) return !!wildmatch(argv[3], argv[2], WM_PATHNAME | WM_CASEFOLD); else if (!strcmp(argv[1], "pathmatch")) return !!wildmatch(argv[3], argv[2], 0); + else if (!strcmp(argv[1], "ipathmatch")) + return !!wildmatch(argv[3], argv[2], WM_CASEFOLD); else return 1; } diff --git a/t/lib-terminal.sh b/t/lib-terminal.sh index cd220e378e..e3809dcead 100644 --- a/t/lib-terminal.sh +++ b/t/lib-terminal.sh @@ -9,8 +9,8 @@ test_terminal () { echo >&4 "test_terminal: need to declare TTY prerequisite" return 127 fi - perl "$TEST_DIRECTORY"/test-terminal.perl "$@" -} + perl "$TEST_DIRECTORY"/test-terminal.perl "$@" 2>&7 +} 7>&2 2>&4 test_lazy_prereq TTY ' test_have_prereq PERL && diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index e401208488..821cf1498b 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -1,8 +1,9 @@ #!/usr/bin/perl -use lib '../../perl/blib/lib'; +use lib '../../perl/build/lib'; use strict; use warnings; +use JSON; use Git; sub get_times { @@ -35,10 +36,34 @@ sub format_times { return $out; } -my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests); +my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests, + $codespeed, $subsection, $reponame); while (scalar @ARGV) { my $arg = $ARGV[0]; my $dir; + if ($arg eq "--codespeed") { + $codespeed = 1; + shift @ARGV; + next; + } + if ($arg eq "--subsection") { + shift @ARGV; + $subsection = $ARGV[0]; + shift @ARGV; + if (! $subsection) { + die "empty subsection"; + } + next; + } + if ($arg eq "--reponame") { + shift @ARGV; + $reponame = $ARGV[0]; + shift @ARGV; + if (! $reponame) { + die "empty reponame"; + } + next; + } last if -f $arg or $arg eq "--"; if (! -d $arg) { my $rev = Git::command_oneline(qw(rev-parse --verify), $arg); @@ -70,8 +95,15 @@ if (not @tests) { } my $resultsdir = "test-results"; -if ($ENV{GIT_PERF_SUBSECTION} ne "") { - $resultsdir .= "/" . $ENV{GIT_PERF_SUBSECTION}; + +if (! $subsection and + exists $ENV{GIT_PERF_SUBSECTION} and + $ENV{GIT_PERF_SUBSECTION} ne "") { + $subsection = $ENV{GIT_PERF_SUBSECTION}; +} + +if ($subsection) { + $resultsdir .= "/" . $subsection; } my @subtests; @@ -100,13 +132,6 @@ sub read_descr { return $line; } -my %descrs; -my $descrlen = 4; # "Test" -for my $t (@subtests) { - $descrs{$t} = $shorttests{$t}.": ".read_descr("$resultsdir/$t.descr"); - $descrlen = length $descrs{$t} if length $descrs{$t}>$descrlen; -} - sub have_duplicate { my %seen; for (@_) { @@ -122,54 +147,119 @@ sub have_slash { return 0; } -my %newdirabbrevs = %dirabbrevs; -while (!have_duplicate(values %newdirabbrevs)) { - %dirabbrevs = %newdirabbrevs; - last if !have_slash(values %dirabbrevs); - %newdirabbrevs = %dirabbrevs; - for (values %newdirabbrevs) { - s{^[^/]*/}{}; +sub print_default_results { + my %descrs; + my $descrlen = 4; # "Test" + for my $t (@subtests) { + $descrs{$t} = $shorttests{$t}.": ".read_descr("$resultsdir/$t.descr"); + $descrlen = length $descrs{$t} if length $descrs{$t}>$descrlen; } -} -my %times; -my @colwidth = ((0)x@dirs); -for my $i (0..$#dirs) { - my $d = $dirs[$i]; - my $w = length (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); - $colwidth[$i] = $w if $w > $colwidth[$i]; -} -for my $t (@subtests) { - my $firstr; + my %newdirabbrevs = %dirabbrevs; + while (!have_duplicate(values %newdirabbrevs)) { + %dirabbrevs = %newdirabbrevs; + last if !have_slash(values %dirabbrevs); + %newdirabbrevs = %dirabbrevs; + for (values %newdirabbrevs) { + s{^[^/]*/}{}; + } + } + + my %times; + my @colwidth = ((0)x@dirs); for my $i (0..$#dirs) { my $d = $dirs[$i]; - $times{$prefixes{$d}.$t} = [get_times("$resultsdir/$prefixes{$d}$t.times")]; - my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; - my $w = length format_times($r,$u,$s,$firstr); + my $w = length (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); $colwidth[$i] = $w if $w > $colwidth[$i]; - $firstr = $r unless defined $firstr; } -} -my $totalwidth = 3*@dirs+$descrlen; -$totalwidth += $_ for (@colwidth); - -binmode STDOUT, ":utf8" or die "PANIC on binmode: $!"; + for my $t (@subtests) { + my $firstr; + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + $times{$prefixes{$d}.$t} = [get_times("$resultsdir/$prefixes{$d}$t.times")]; + my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; + my $w = length format_times($r,$u,$s,$firstr); + $colwidth[$i] = $w if $w > $colwidth[$i]; + $firstr = $r unless defined $firstr; + } + } + my $totalwidth = 3*@dirs+$descrlen; + $totalwidth += $_ for (@colwidth); -printf "%-${descrlen}s", "Test"; -for my $i (0..$#dirs) { - my $d = $dirs[$i]; - printf " %-$colwidth[$i]s", (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); -} -print "\n"; -print "-"x$totalwidth, "\n"; -for my $t (@subtests) { - printf "%-${descrlen}s", $descrs{$t}; - my $firstr; + printf "%-${descrlen}s", "Test"; for my $i (0..$#dirs) { my $d = $dirs[$i]; - my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; - printf " %-$colwidth[$i]s", format_times($r,$u,$s,$firstr); - $firstr = $r unless defined $firstr; + printf " %-$colwidth[$i]s", (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); } print "\n"; + print "-"x$totalwidth, "\n"; + for my $t (@subtests) { + printf "%-${descrlen}s", $descrs{$t}; + my $firstr; + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; + printf " %-$colwidth[$i]s", format_times($r,$u,$s,$firstr); + $firstr = $r unless defined $firstr; + } + print "\n"; + } +} + +sub print_codespeed_results { + my ($subsection) = @_; + + my $project = "Git"; + + my $executable = `uname -s -m`; + chomp $executable; + + if ($subsection) { + $executable .= ", " . $subsection; + } + + my $environment; + if ($reponame) { + $environment = $reponame; + } elsif (exists $ENV{GIT_PERF_REPO_NAME} and $ENV{GIT_PERF_REPO_NAME} ne "") { + $environment = $ENV{GIT_PERF_REPO_NAME}; + } elsif (exists $ENV{GIT_TEST_INSTALLED} and $ENV{GIT_TEST_INSTALLED} ne "") { + $environment = $ENV{GIT_TEST_INSTALLED}; + $environment =~ s|/bin-wrappers$||; + } else { + $environment = `uname -r`; + chomp $environment; + } + + my @data; + + for my $t (@subtests) { + for my $d (@dirs) { + my $commitid = $prefixes{$d}; + $commitid =~ s/^build_//; + $commitid =~ s/\.$//; + my ($result_value, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.times"); + + my %vals = ( + "commitid" => $commitid, + "project" => $project, + "branch" => $dirnames{$d}, + "executable" => $executable, + "benchmark" => $shorttests{$t} . " " . read_descr("$resultsdir/$t.descr"), + "environment" => $environment, + "result_value" => $result_value, + ); + push @data, \%vals; + } + } + + print to_json(\@data, {utf8 => 1, pretty => 1, canonical => 1}), "\n"; +} + +binmode STDOUT, ":utf8" or die "PANIC on binmode: $!"; + +if ($codespeed) { + print_codespeed_results($subsection); +} else { + print_default_results(); } diff --git a/t/perf/run b/t/perf/run index 43e4de49ef..213da5d6b9 100755 --- a/t/perf/run +++ b/t/perf/run @@ -105,7 +105,7 @@ get_var_from_env_or_config () { env_var="$1" conf_sec="$2" conf_var="$3" - # $4 can be set to a default value + conf_opts="$4" # optional # Do nothing if the env variable is already set eval "test -z \"\${$env_var+x}\"" || return @@ -116,18 +116,17 @@ get_var_from_env_or_config () { if test -n "$GIT_PERF_SUBSECTION" then var="$conf_sec.$GIT_PERF_SUBSECTION.$conf_var" - conf_value=$(git config -f "$GIT_PERF_CONFIG_FILE" "$var") && + conf_value=$(git config $conf_opts -f "$GIT_PERF_CONFIG_FILE" "$var") && eval "$env_var=\"$conf_value\"" && return fi var="$conf_sec.$conf_var" - conf_value=$(git config -f "$GIT_PERF_CONFIG_FILE" "$var") && - eval "$env_var=\"$conf_value\"" && return - - test -n "${4+x}" && eval "$env_var=\"$4\"" + conf_value=$(git config $conf_opts -f "$GIT_PERF_CONFIG_FILE" "$var") && + eval "$env_var=\"$conf_value\"" } run_subsection () { - get_var_from_env_or_config "GIT_PERF_REPEAT_COUNT" "perf" "repeatCount" 3 + get_var_from_env_or_config "GIT_PERF_REPEAT_COUNT" "perf" "repeatCount" "--int" + : ${GIT_PERF_REPEAT_COUNT:=3} export GIT_PERF_REPEAT_COUNT get_var_from_env_or_config "GIT_PERF_DIRS_OR_REVS" "perf" "dirsOrRevs" @@ -136,6 +135,9 @@ run_subsection () { get_var_from_env_or_config "GIT_PERF_MAKE_COMMAND" "perf" "makeCommand" get_var_from_env_or_config "GIT_PERF_MAKE_OPTS" "perf" "makeOpts" + get_var_from_env_or_config "GIT_PERF_REPO_NAME" "perf" "repoName" + export GIT_PERF_REPO_NAME + GIT_PERF_AGGREGATING_LATER=t export GIT_PERF_AGGREGATING_LATER @@ -143,10 +145,25 @@ run_subsection () { set -- . "$@" fi + codespeed_opt= + test "$GIT_PERF_CODESPEED_OUTPUT" = "true" && codespeed_opt="--codespeed" + run_dirs "$@" - ./aggregate.perl "$@" + + if test -z "$GIT_PERF_SEND_TO_CODESPEED" + then + ./aggregate.perl $codespeed_opt "$@" + else + json_res_file="test-results/$GIT_PERF_SUBSECTION/aggregate.json" + ./aggregate.perl --codespeed "$@" | tee "$json_res_file" + send_data_url="$GIT_PERF_SEND_TO_CODESPEED/result/add/json/" + curl -v --request POST --data-urlencode "json=$(cat "$json_res_file")" "$send_data_url" + fi } +get_var_from_env_or_config "GIT_PERF_CODESPEED_OUTPUT" "perf" "codespeedOutput" "--bool" +get_var_from_env_or_config "GIT_PERF_SEND_TO_CODESPEED" "perf" "sendToCodespeed" + cd "$(dirname $0)" . ../../GIT-BUILD-OPTIONS diff --git a/t/t0002-gitfile.sh b/t/t0002-gitfile.sh index 9670e8cbe6..3691023d51 100755 --- a/t/t0002-gitfile.sh +++ b/t/t0002-gitfile.sh @@ -10,15 +10,6 @@ objpath() { echo "$1" | sed -e 's|\(..\)|\1/|' } -objck() { - p=$(objpath "$1") - if test ! -f "$REAL/objects/$p" - then - echo "Object not found: $REAL/objects/$p" - false - fi -} - test_expect_success 'initial setup' ' REAL="$(pwd)/.real" && mv .git "$REAL" @@ -26,30 +17,14 @@ test_expect_success 'initial setup' ' test_expect_success 'bad setup: invalid .git file format' ' echo "gitdir $REAL" >.git && - if git rev-parse 2>.err - then - echo "git rev-parse accepted an invalid .git file" - false - fi && - if ! grep "Invalid gitfile format" .err - then - echo "git rev-parse returned wrong error" - false - fi + test_must_fail git rev-parse 2>.err && + test_i18ngrep "invalid gitfile format" .err ' test_expect_success 'bad setup: invalid .git file path' ' echo "gitdir: $REAL.not" >.git && - if git rev-parse 2>.err - then - echo "git rev-parse accepted an invalid .git file path" - false - fi && - if ! grep "Not a git repository" .err - then - echo "git rev-parse returned wrong error" - false - fi + test_must_fail git rev-parse 2>.err && + test_i18ngrep "not a git repository" .err ' test_expect_success 'final setup + check rev-parse --git-dir' ' @@ -60,7 +35,7 @@ test_expect_success 'final setup + check rev-parse --git-dir' ' test_expect_success 'check hash-object' ' echo "foo" >bar && SHA=$(cat bar | git hash-object -w --stdin) && - objck $SHA + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check cat-file' ' @@ -69,29 +44,21 @@ test_expect_success 'check cat-file' ' ' test_expect_success 'check update-index' ' - if test -f "$REAL/index" - then - echo "Hmm, $REAL/index exists?" - false - fi && + test_path_is_missing "$REAL/index" && rm -f "$REAL/objects/$(objpath $SHA)" && git update-index --add bar && - if ! test -f "$REAL/index" - then - echo "$REAL/index not found" - false - fi && - objck $SHA + test_path_is_file "$REAL/index" && + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check write-tree' ' SHA=$(git write-tree) && - objck $SHA + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check commit-tree' ' SHA=$(echo "commit bar" | git commit-tree $SHA) && - objck $SHA + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check rev-list' ' diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index d27f438bf4..c03f155a35 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -307,7 +307,7 @@ test_expect_success_multi 'needs work tree' '' ' cd .git && test_check_ignore "foo" 128 ) && - stderr_contains "fatal: This operation must be run in a work tree" + stderr_contains "fatal: this operation must be run in a work tree" ' ############################################################################ @@ -775,6 +775,26 @@ test_expect_success PIPE 'streaming support for --stdin' ' echo "$response" | grep "^:: two" ' +test_expect_success 'existing file and directory' ' + test_when_finished "rm one" && + test_when_finished "rmdir top-level-dir" && + >one && + mkdir top-level-dir && + git check-ignore one top-level-dir >actual && + grep one actual && + grep top-level-dir actual +' + +test_expect_success 'existing directory and file' ' + test_when_finished "rm one" && + test_when_finished "rmdir top-level-dir" && + >one && + mkdir top-level-dir && + git check-ignore top-level-dir one >actual && + grep one actual && + grep top-level-dir actual +' + ############################################################################ # # test whitespace handling diff --git a/t/t0050-filesystem.sh b/t/t0050-filesystem.sh index b29d749bb7..192c94eccd 100755 --- a/t/t0050-filesystem.sh +++ b/t/t0050-filesystem.sh @@ -80,7 +80,21 @@ test_expect_success 'merge (case change)' ' git merge topic ' - +test_expect_success CASE_INSENSITIVE_FS 'add directory (with different case)' ' + git reset --hard initial && + mkdir -p dir1/dir2 && + echo >dir1/dir2/a && + echo >dir1/dir2/b && + git add dir1/dir2/a && + git add dir1/DIR2/b && + git ls-files >actual && + cat >expected <<-\EOF && + camelcase + dir1/dir2/a + dir1/dir2/b + EOF + test_cmp expected actual +' test_expect_failure CASE_INSENSITIVE_FS 'add (with different case)' ' git reset --hard initial && diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index e4739170aa..24c92b6cd7 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -141,4 +141,41 @@ test_expect_success 'run_command outputs ' ' test_cmp expect actual ' +test_trace () { + expect="$1" + shift + GIT_TRACE=1 test-run-command "$@" run-command true 2>&1 >/dev/null | \ + sed 's/.* run_command: //' >actual && + echo "$expect true" >expect && + test_cmp expect actual +} + +test_expect_success 'GIT_TRACE with environment variables' ' + test_trace "abc=1 def=2" env abc=1 env def=2 && + test_trace "abc=2" env abc env abc=1 env abc=2 && + test_trace "abc=2" env abc env abc=2 && + ( + abc=1 && export abc && + test_trace "def=1" env abc=1 env def=1 + ) && + ( + abc=1 && export abc && + test_trace "def=1" env abc env abc=1 env def=1 + ) && + test_trace "def=1" env non-exist env def=1 && + test_trace "abc=2" env abc=1 env abc env abc=2 && + ( + abc=1 def=2 && export abc def && + test_trace "unset abc def;" env abc env def + ) && + ( + abc=1 def=2 && export abc def && + test_trace "unset def; abc=3" env abc env def env abc=3 + ) && + ( + abc=1 && export abc && + test_trace "unset abc;" env abc=2 env abc + ) +' + test_done diff --git a/t/t0410-partial-clone.sh b/t/t0410-partial-clone.sh new file mode 100755 index 0000000000..cc18b75c03 --- /dev/null +++ b/t/t0410-partial-clone.sh @@ -0,0 +1,343 @@ +#!/bin/sh + +test_description='partial clone' + +. ./test-lib.sh + +delete_object () { + rm $1/.git/objects/$(echo $2 | sed -e 's|^..|&/|') +} + +pack_as_from_promisor () { + HASH=$(git -C repo pack-objects .git/objects/pack/pack) && + >repo/.git/objects/pack/pack-$HASH.promisor && + echo $HASH +} + +promise_and_delete () { + HASH=$(git -C repo rev-parse "$1") && + git -C repo tag -a -m message my_annotated_tag "$HASH" && + git -C repo rev-parse my_annotated_tag | pack_as_from_promisor && + # tag -d prints a message to stdout, so redirect it + git -C repo tag -d my_annotated_tag >/dev/null && + delete_object repo "$HASH" +} + +test_expect_success 'missing reflog object, but promised by a commit, passes fsck' ' + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + C=$(git -C repo commit-tree -m c -p $A HEAD^{tree}) && + + # Reference $A only from reflog, and delete it + git -C repo branch my_branch "$A" && + git -C repo branch -f my_branch my_commit && + delete_object repo "$A" && + + # State that we got $C, which refers to $A, from promisor + printf "$C\n" | pack_as_from_promisor && + + # Normally, it fails + test_must_fail git -C repo fsck && + + # But with the extension, it succeeds + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing reflog object, but promised by a tag, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + git -C repo tag -a -m d my_tag_name $A && + T=$(git -C repo rev-parse my_tag_name) && + git -C repo tag -d my_tag_name && + + # Reference $A only from reflog, and delete it + git -C repo branch my_branch "$A" && + git -C repo branch -f my_branch my_commit && + delete_object repo "$A" && + + # State that we got $T, which refers to $A, from promisor + printf "$T\n" | pack_as_from_promisor && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing reflog object alone fails fsck, even with extension set' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + B=$(git -C repo commit-tree -m b HEAD^{tree}) && + + # Reference $A only from reflog, and delete it + git -C repo branch my_branch "$A" && + git -C repo branch -f my_branch my_commit && + delete_object repo "$A" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + test_must_fail git -C repo fsck +' + +test_expect_success 'missing ref object, but promised, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + + # Reference $A only from ref + git -C repo branch my_branch "$A" && + promise_and_delete "$A" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing object, but promised, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo 1 && + test_commit -C repo 2 && + test_commit -C repo 3 && + git -C repo tag -a annotated_tag -m "annotated tag" && + + C=$(git -C repo rev-parse 1) && + T=$(git -C repo rev-parse 2^{tree}) && + B=$(git hash-object repo/3.t) && + AT=$(git -C repo rev-parse annotated_tag) && + + promise_and_delete "$C" && + promise_and_delete "$T" && + promise_and_delete "$B" && + promise_and_delete "$AT" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing CLI object, but promised, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + promise_and_delete "$A" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck "$A" +' + +test_expect_success 'fetching of missing objects' ' + rm -rf repo && + test_create_repo server && + test_commit -C server foo && + git -C server repack -a -d --write-bitmap-index && + + git clone "file://$(pwd)/server" repo && + HASH=$(git -C repo rev-parse foo) && + rm -rf repo/.git/objects/* && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "origin" && + git -C repo cat-file -p "$HASH" && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(cat promisorlist | sed "s/promisor$/idx/") && + git verify-pack --verbose "$IDX" | grep "$HASH" +' + +test_expect_success 'rev-list stops traversal at missing and promised commit' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + + FOO=$(git -C repo rev-parse foo) && + promise_and_delete "$FOO" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects bar >out && + grep $(git -C repo rev-parse bar) out && + ! grep $FOO out +' + +test_expect_success 'rev-list stops traversal at missing and promised tree' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + mkdir repo/a_dir && + echo something >repo/a_dir/something && + git -C repo add a_dir/something && + git -C repo commit -m bar && + + # foo^{tree} (tree referenced from commit) + TREE=$(git -C repo rev-parse foo^{tree}) && + + # a tree referenced by HEAD^{tree} (tree referenced from tree) + TREE2=$(git -C repo ls-tree HEAD^{tree} | grep " tree " | head -1 | cut -b13-52) && + + promise_and_delete "$TREE" && + promise_and_delete "$TREE2" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >out && + grep $(git -C repo rev-parse foo) out && + ! grep $TREE out && + grep $(git -C repo rev-parse HEAD) out && + ! grep $TREE2 out +' + +test_expect_success 'rev-list stops traversal at missing and promised blob' ' + rm -rf repo && + test_create_repo repo && + echo something >repo/something && + git -C repo add something && + git -C repo commit -m foo && + + BLOB=$(git -C repo hash-object -w something) && + promise_and_delete "$BLOB" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >out && + grep $(git -C repo rev-parse HEAD) out && + ! grep $BLOB out +' + +test_expect_success 'rev-list stops traversal at promisor commit, tree, and blob' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + test_commit -C repo baz && + + COMMIT=$(git -C repo rev-parse foo) && + TREE=$(git -C repo rev-parse bar^{tree}) && + BLOB=$(git hash-object repo/baz.t) && + printf "%s\n%s\n%s\n" $COMMIT $TREE $BLOB | pack_as_from_promisor && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >out && + ! grep $COMMIT out && + ! grep $TREE out && + ! grep $BLOB out && + grep $(git -C repo rev-parse bar) out # sanity check that some walking was done +' + +test_expect_success 'rev-list accepts missing and promised objects on command line' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + test_commit -C repo baz && + + COMMIT=$(git -C repo rev-parse foo) && + TREE=$(git -C repo rev-parse bar^{tree}) && + BLOB=$(git hash-object repo/baz.t) && + + promise_and_delete $COMMIT && + promise_and_delete $TREE && + promise_and_delete $BLOB && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects "$COMMIT" "$TREE" "$BLOB" +' + +test_expect_success 'gc does not repack promisor objects' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + TREE_HASH=$(git -C repo rev-parse HEAD^{tree}) && + HASH=$(printf "$TREE_HASH\n" | pack_as_from_promisor) && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo gc && + + # Ensure that the promisor packfile still exists, and remove it + test -e repo/.git/objects/pack/pack-$HASH.pack && + rm repo/.git/objects/pack/pack-$HASH.* && + + # Ensure that the single other pack contains the commit, but not the tree + ls repo/.git/objects/pack/pack-*.pack >packlist && + test_line_count = 1 packlist && + git verify-pack repo/.git/objects/pack/pack-*.pack -v >out && + grep "$(git -C repo rev-parse HEAD)" out && + ! grep "$TREE_HASH" out +' + +test_expect_success 'gc stops traversal when a missing but promised object is reached' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + TREE_HASH=$(git -C repo rev-parse HEAD^{tree}) && + HASH=$(promise_and_delete $TREE_HASH) && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo gc && + + # Ensure that the promisor packfile still exists, and remove it + test -e repo/.git/objects/pack/pack-$HASH.pack && + rm repo/.git/objects/pack/pack-$HASH.* && + + # Ensure that the single other pack contains the commit, but not the tree + ls repo/.git/objects/pack/pack-*.pack >packlist && + test_line_count = 1 packlist && + git verify-pack repo/.git/objects/pack/pack-*.pack -v >out && + grep "$(git -C repo rev-parse HEAD)" out && + ! grep "$TREE_HASH" out +' + +LIB_HTTPD_PORT=12345 # default port, 410, cannot be used as non-root +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'fetching of missing objects from an HTTP server' ' + rm -rf repo && + SERVER="$HTTPD_DOCUMENT_ROOT_PATH/server" && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" foo && + git -C "$SERVER" repack -a -d --write-bitmap-index && + + git clone $HTTPD_URL/smart/server repo && + HASH=$(git -C repo rev-parse foo) && + rm -rf repo/.git/objects/* && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "origin" && + git -C repo cat-file -p "$HASH" && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(cat promisorlist | sed "s/promisor$/idx/") && + git verify-pack --verbose "$IDX" | grep "$HASH" +' + +stop_httpd + +test_done diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index cbeb9bebee..4f8e6f5fde 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -1206,6 +1206,29 @@ test_expect_success 'git -c is not confused by empty environment' ' GIT_CONFIG_PARAMETERS="" git -c x.one=1 config --list ' +sq="'" +test_expect_success 'detect bogus GIT_CONFIG_PARAMETERS' ' + cat >expect <<-\EOF && + env.one one + env.two two + EOF + GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq} ${sq}env.two=two${sq}" \ + git config --get-regexp "env.*" >actual && + test_cmp expect actual && + + cat >expect <<-EOF && + env.one one${sq} + env.two two + EOF + GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq$sq$sq ${sq}env.two=two${sq}" \ + git config --get-regexp "env.*" >actual && + test_cmp expect actual && + + test_must_fail env \ + GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq ${sq}env.two=two${sq}" \ + git config --get-regexp "env.*" +' + test_expect_success 'git config --edit works' ' git config -f tmp test.value no && echo test.value=yes >expect && diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 79a0251efa..4ee009da66 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -157,7 +157,7 @@ test_expect_success 'relative path not found' ' test_expect_success 'relative path outside worktree' ' test_must_fail git rev-parse HEAD:../file.txt >output 2>error && test -z "$(cat output)" && - grep "outside repository" error + test_i18ngrep "outside repository" error ' test_expect_success 'relative path when cwd is outside worktree' ' diff --git a/t/t1507-rev-parse-upstream.sh b/t/t1507-rev-parse-upstream.sh index b23c4e3fab..2ce68cc277 100755 --- a/t/t1507-rev-parse-upstream.sh +++ b/t/t1507-rev-parse-upstream.sh @@ -42,7 +42,7 @@ commit_subject () { error_message () { (cd clone && - test_must_fail git rev-parse --verify "$@") + test_must_fail git rev-parse --verify "$@" 2>../error) } test_expect_success '@{upstream} resolves to correct full name' ' @@ -159,8 +159,8 @@ test_expect_success 'branch@{u} error message when no upstream' ' cat >expect <<-EOF && fatal: no upstream configured for branch ${sq}non-tracking${sq} EOF - error_message non-tracking@{u} 2>actual && - test_i18ncmp expect actual + error_message non-tracking@{u} && + test_i18ncmp expect error ' test_expect_success '@{u} error message when no upstream' ' @@ -175,8 +175,8 @@ test_expect_success 'branch@{u} error message with misspelt branch' ' cat >expect <<-EOF && fatal: no such branch: ${sq}no-such-branch${sq} EOF - error_message no-such-branch@{u} 2>actual && - test_i18ncmp expect actual + error_message no-such-branch@{u} && + test_i18ncmp expect error ' test_expect_success '@{u} error message when not on a branch' ' @@ -192,8 +192,8 @@ test_expect_success 'branch@{u} error message if upstream branch not fetched' ' cat >expect <<-EOF && fatal: upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch EOF - error_message bad-upstream@{u} 2>actual && - test_i18ncmp expect actual + error_message bad-upstream@{u} && + test_i18ncmp expect error ' test_expect_success 'pull works when tracking a local branch' ' diff --git a/t/t1510-repo-setup.sh b/t/t1510-repo-setup.sh index 13ae12dfa7..e6854b828e 100755 --- a/t/t1510-repo-setup.sh +++ b/t/t1510-repo-setup.sh @@ -39,6 +39,10 @@ A few rules for repo setup: 11. When user's cwd is outside worktree, cwd remains unchanged, prefix is NULL. " + +# This test heavily relies on the standard error of nested function calls. +test_untraceable=UnfortunatelyYes + . ./test-lib.sh here=$(pwd) diff --git a/t/t2025-worktree-add.sh b/t/t2025-worktree-add.sh index 2b95944973..d0d2e4f7ec 100755 --- a/t/t2025-worktree-add.sh +++ b/t/t2025-worktree-add.sh @@ -451,32 +451,68 @@ test_expect_success 'git worktree --no-guess-remote option overrides config' ' ' post_checkout_hook () { - test_when_finished "rm -f .git/hooks/post-checkout" && - mkdir -p .git/hooks && - write_script .git/hooks/post-checkout <<-\EOF - echo $* >hook.actual + gitdir=${1:-.git} + test_when_finished "rm -f $gitdir/hooks/post-checkout" && + mkdir -p $gitdir/hooks && + write_script $gitdir/hooks/post-checkout <<-\EOF + { + echo $* + git rev-parse --git-dir --show-toplevel + } >hook.actual EOF } test_expect_success '"add" invokes post-checkout hook (branch)' ' post_checkout_hook && - printf "%s %s 1\n" $_z40 $(git rev-parse HEAD) >hook.expect && + { + echo $_z40 $(git rev-parse HEAD) 1 && + echo $(pwd)/.git/worktrees/gumby && + echo $(pwd)/gumby + } >hook.expect && git worktree add gumby && - test_cmp hook.expect hook.actual + test_cmp hook.expect gumby/hook.actual ' test_expect_success '"add" invokes post-checkout hook (detached)' ' post_checkout_hook && - printf "%s %s 1\n" $_z40 $(git rev-parse HEAD) >hook.expect && + { + echo $_z40 $(git rev-parse HEAD) 1 && + echo $(pwd)/.git/worktrees/grumpy && + echo $(pwd)/grumpy + } >hook.expect && git worktree add --detach grumpy && - test_cmp hook.expect hook.actual + test_cmp hook.expect grumpy/hook.actual ' test_expect_success '"add --no-checkout" suppresses post-checkout hook' ' post_checkout_hook && rm -f hook.actual && git worktree add --no-checkout gloopy && - test_path_is_missing hook.actual + test_path_is_missing gloopy/hook.actual +' + +test_expect_success '"add" in other worktree invokes post-checkout hook' ' + post_checkout_hook && + { + echo $_z40 $(git rev-parse HEAD) 1 && + echo $(pwd)/.git/worktrees/guppy && + echo $(pwd)/guppy + } >hook.expect && + git -C gloopy worktree add --detach ../guppy && + test_cmp hook.expect guppy/hook.actual +' + +test_expect_success '"add" in bare repo invokes post-checkout hook' ' + rm -rf bare && + git clone --bare . bare && + { + echo $_z40 $(git --git-dir=bare rev-parse HEAD) 1 && + echo $(pwd)/bare/worktrees/goozy && + echo $(pwd)/goozy + } >hook.expect && + post_checkout_hook bare && + git -C bare worktree add --detach ../goozy && + test_cmp hook.expect goozy/hook.actual ' test_done diff --git a/t/t2028-worktree-move.sh b/t/t2028-worktree-move.sh index 8298aaf97f..5d5b3632ba 100755 --- a/t/t2028-worktree-move.sh +++ b/t/t2028-worktree-move.sh @@ -7,7 +7,8 @@ test_description='test git worktree move, remove, lock and unlock' test_expect_success 'setup' ' test_commit init && git worktree add source && - git worktree list --porcelain | grep "^worktree" >actual && + git worktree list --porcelain >out && + grep "^worktree" out >actual && cat <<-EOF >expected && worktree $(pwd) worktree $(pwd)/source @@ -59,4 +60,86 @@ test_expect_success 'unlock worktree twice' ' test_path_is_missing .git/worktrees/source/locked ' +test_expect_success 'move non-worktree' ' + mkdir abc && + test_must_fail git worktree move abc def +' + +test_expect_success 'move locked worktree' ' + git worktree lock source && + test_when_finished "git worktree unlock source" && + test_must_fail git worktree move source destination +' + +test_expect_success 'move worktree' ' + toplevel="$(pwd)" && + git worktree move source destination && + test_path_is_missing source && + git worktree list --porcelain >out && + grep "^worktree.*/destination" out && + ! grep "^worktree.*/source" out && + git -C destination log --format=%s >actual2 && + echo init >expected2 && + test_cmp expected2 actual2 +' + +test_expect_success 'move main worktree' ' + test_must_fail git worktree move . def +' + +test_expect_success 'move worktree to another dir' ' + mkdir some-dir && + git worktree move destination some-dir && + test_when_finished "git worktree move some-dir/destination destination" && + test_path_is_missing destination && + git worktree list --porcelain >out && + grep "^worktree.*/some-dir/destination" out && + git -C some-dir/destination log --format=%s >actual2 && + echo init >expected2 && + test_cmp expected2 actual2 +' + +test_expect_success 'remove main worktree' ' + test_must_fail git worktree remove . +' + +test_expect_success 'remove locked worktree' ' + git worktree lock destination && + test_when_finished "git worktree unlock destination" && + test_must_fail git worktree remove destination +' + +test_expect_success 'remove worktree with dirty tracked file' ' + echo dirty >>destination/init.t && + test_when_finished "git -C destination checkout init.t" && + test_must_fail git worktree remove destination +' + +test_expect_success 'remove worktree with untracked file' ' + : >destination/untracked && + test_must_fail git worktree remove destination +' + +test_expect_success 'force remove worktree with untracked file' ' + git worktree remove --force destination && + test_path_is_missing destination +' + +test_expect_success 'remove missing worktree' ' + git worktree add to-be-gone && + test -d .git/worktrees/to-be-gone && + mv to-be-gone gone && + git worktree remove to-be-gone && + test_path_is_missing .git/worktrees/to-be-gone +' + +test_expect_success 'NOT remove missing-but-locked worktree' ' + git worktree add gone-but-locked && + git worktree lock gone-but-locked && + test -d .git/worktrees/gone-but-locked && + mv gone-but-locked really-gone-now && + test_must_fail git worktree remove gone-but-locked && + test_path_is_dir .git/worktrees/gone-but-locked +' + test_done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index cdc38fe5d1..3563e77b37 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -525,20 +525,22 @@ test_expect_success 'merge-recursive w/ empty work tree - ours has rename' ' GIT_INDEX_FILE="$PWD/ours-has-rename-index" && export GIT_INDEX_FILE && mkdir "$GIT_WORK_TREE" && - git read-tree -i -m $c7 && - git update-index --ignore-missing --refresh && - git merge-recursive $c0 -- $c7 $c3 && - git ls-files -s >actual-files - ) 2>actual-err && - >expected-err && + git read-tree -i -m $c7 2>actual-err && + test_must_be_empty actual-err && + git update-index --ignore-missing --refresh 2>actual-err && + test_must_be_empty actual-err && + git merge-recursive $c0 -- $c7 $c3 2>actual-err && + test_must_be_empty actual-err && + git ls-files -s >actual-files 2>actual-err && + test_must_be_empty actual-err + ) && cat >expected-files <<-EOF && 100644 $o3 0 b/c 100644 $o0 0 c 100644 $o0 0 d/e 100644 $o0 0 e EOF - test_cmp expected-files actual-files && - test_cmp expected-err actual-err + test_cmp expected-files actual-files ' test_expect_success 'merge-recursive w/ empty work tree - theirs has rename' ' @@ -548,20 +550,22 @@ test_expect_success 'merge-recursive w/ empty work tree - theirs has rename' ' GIT_INDEX_FILE="$PWD/theirs-has-rename-index" && export GIT_INDEX_FILE && mkdir "$GIT_WORK_TREE" && - git read-tree -i -m $c3 && - git update-index --ignore-missing --refresh && - git merge-recursive $c0 -- $c3 $c7 && - git ls-files -s >actual-files - ) 2>actual-err && - >expected-err && + git read-tree -i -m $c3 2>actual-err && + test_must_be_empty actual-err && + git update-index --ignore-missing --refresh 2>actual-err && + test_must_be_empty actual-err && + git merge-recursive $c0 -- $c3 $c7 2>actual-err && + test_must_be_empty actual-err && + git ls-files -s >actual-files 2>actual-err && + test_must_be_empty actual-err + ) && cat >expected-files <<-EOF && 100644 $o3 0 b/c 100644 $o0 0 c 100644 $o0 0 d/e 100644 $o0 0 e EOF - test_cmp expected-files actual-files && - test_cmp expected-err actual-err + test_cmp expected-files actual-files ' test_expect_success 'merge removes empty directories' ' diff --git a/t/t3070-wildmatch.sh b/t/t3070-wildmatch.sh index 163a14a1c2..c1fc6ca730 100755 --- a/t/t3070-wildmatch.sh +++ b/t/t3070-wildmatch.sh @@ -4,266 +4,431 @@ test_description='wildmatch tests' . ./test-lib.sh -match() { - if [ $1 = 1 ]; then - test_expect_success "wildmatch: match '$3' '$4'" " - test-wildmatch wildmatch '$3' '$4' - " - else - test_expect_success "wildmatch: no match '$3' '$4'" " - ! test-wildmatch wildmatch '$3' '$4' - " - fi +should_create_test_file() { + file=$1 + + case $file in + # `touch .` will succeed but obviously not do what we intend + # here. + ".") + return 1 + ;; + # We cannot create a file with an empty filename. + "") + return 1 + ;; + # The tests that are testing that e.g. foo//bar is matched by + # foo/*/bar can't be tested on filesystems since there's no + # way we're getting a double slash. + *//*) + return 1 + ;; + # When testing the difference between foo/bar and foo/bar/ we + # can't test the latter. + */) + return 1 + ;; + # On Windows, \ in paths is silently converted to /, which + # would result in the "touch" below working, but the test + # itself failing. See 6fd1106aa4 ("t3700: Skip a test with + # backslashes in pathspec", 2009-03-13) for prior art and + # details. + *\\*) + if ! test_have_prereq BSLASHPSPEC + then + return 1 + fi + # NOTE: The ;;& bash extension is not portable, so + # this test needs to be at the end of the pattern + # list. + # + # If we want to add more conditional returns we either + # need a new case statement, or turn this whole thing + # into a series of "if" tests. + ;; + esac + + + # On Windows proper (i.e. not Cygwin) many file names which + # under Cygwin would be emulated don't work. + if test_have_prereq MINGW + then + case $file in + " ") + # Files called " " are forbidden on Windows + return 1 + ;; + *\<*|*\>*|*:*|*\"*|*\|*|*\?*|*\**) + # Files with various special characters aren't + # allowed on Windows. Sourced from + # https://stackoverflow.com/a/31976060 + return 1 + ;; + esac + fi + + return 0 } -imatch() { - if [ $1 = 1 ]; then - test_expect_success "iwildmatch: match '$2' '$3'" " - test-wildmatch iwildmatch '$2' '$3' - " - else - test_expect_success "iwildmatch: no match '$2' '$3'" " - ! test-wildmatch iwildmatch '$2' '$3' - " - fi +match_with_function() { + text=$1 + pattern=$2 + match_expect=$3 + match_function=$4 + + if test "$match_expect" = 1 + then + test_expect_success "$match_function: match '$text' '$pattern'" " + test-wildmatch $match_function '$text' '$pattern' + " + elif test "$match_expect" = 0 + then + test_expect_success "$match_function: no match '$text' '$pattern'" " + test_must_fail test-wildmatch $match_function '$text' '$pattern' + " + else + test_expect_success "PANIC: Test framework error. Unknown matches value $match_expect" 'false' + fi + +} + +match_with_ls_files() { + text=$1 + pattern=$2 + match_expect=$3 + match_function=$4 + ls_files_args=$5 + + match_stdout_stderr_cmp=" + tr -d '\0' <actual.raw >actual && + >expect.err && + test_cmp expect.err actual.err && + test_cmp expect actual" + + if test "$match_expect" = 'E' + then + if test -e .git/created_test_file + then + test_expect_success EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match dies on '$pattern' '$text'" " + printf '%s' '$text' >expect && + test_must_fail git$ls_files_args ls-files -z -- '$pattern' + " + else + test_expect_failure EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match skip '$pattern' '$text'" 'false' + fi + elif test "$match_expect" = 1 + then + if test -e .git/created_test_file + then + test_expect_success EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match '$pattern' '$text'" " + printf '%s' '$text' >expect && + git$ls_files_args ls-files -z -- '$pattern' >actual.raw 2>actual.err && + $match_stdout_stderr_cmp + " + else + test_expect_failure EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match skip '$pattern' '$text'" 'false' + fi + elif test "$match_expect" = 0 + then + if test -e .git/created_test_file + then + test_expect_success EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): no match '$pattern' '$text'" " + >expect && + git$ls_files_args ls-files -z -- '$pattern' >actual.raw 2>actual.err && + $match_stdout_stderr_cmp + " + else + test_expect_failure EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): no match skip '$pattern' '$text'" 'false' + fi + else + test_expect_success "PANIC: Test framework error. Unknown matches value $match_expect" 'false' + fi } -pathmatch() { - if [ $1 = 1 ]; then - test_expect_success "pathmatch: match '$2' '$3'" " - test-wildmatch pathmatch '$2' '$3' - " - else - test_expect_success "pathmatch: no match '$2' '$3'" " - ! test-wildmatch pathmatch '$2' '$3' - " - fi +match() { + if test "$#" = 6 + then + # When test-wildmatch and git ls-files produce the same + # result. + match_glob=$1 + match_file_glob=$match_glob + match_iglob=$2 + match_file_iglob=$match_iglob + match_pathmatch=$3 + match_file_pathmatch=$match_pathmatch + match_pathmatchi=$4 + match_file_pathmatchi=$match_pathmatchi + text=$5 + pattern=$6 + elif test "$#" = 10 + then + match_glob=$1 + match_iglob=$2 + match_pathmatch=$3 + match_pathmatchi=$4 + match_file_glob=$5 + match_file_iglob=$6 + match_file_pathmatch=$7 + match_file_pathmatchi=$8 + text=$9 + pattern=${10} + fi + + test_expect_success EXPENSIVE_ON_WINDOWS 'cleanup after previous file test' ' + if test -e .git/created_test_file + then + git reset && + git clean -df + fi + ' + + printf '%s' "$text" >.git/expected_test_file + + test_expect_success EXPENSIVE_ON_WINDOWS "setup match file test for $text" ' + file=$(cat .git/expected_test_file) && + if should_create_test_file "$file" + then + dirs=${file%/*} + if test "$file" != "$dirs" + then + mkdir -p -- "$dirs" && + touch -- "./$text" + else + touch -- "./$file" + fi && + git add -A && + printf "%s" "$file" >.git/created_test_file + elif test -e .git/created_test_file + then + rm .git/created_test_file + fi + ' + + # $1: Case sensitive glob match: test-wildmatch & ls-files + match_with_function "$text" "$pattern" $match_glob "wildmatch" + match_with_ls_files "$text" "$pattern" $match_file_glob "wildmatch" " --glob-pathspecs" + + # $2: Case insensitive glob match: test-wildmatch & ls-files + match_with_function "$text" "$pattern" $match_iglob "iwildmatch" + match_with_ls_files "$text" "$pattern" $match_file_iglob "iwildmatch" " --glob-pathspecs --icase-pathspecs" + + # $3: Case sensitive path match: test-wildmatch & ls-files + match_with_function "$text" "$pattern" $match_pathmatch "pathmatch" + match_with_ls_files "$text" "$pattern" $match_file_pathmatch "pathmatch" "" + + # $4: Case insensitive path match: test-wildmatch & ls-files + match_with_function "$text" "$pattern" $match_pathmatchi "ipathmatch" + match_with_ls_files "$text" "$pattern" $match_file_pathmatchi "ipathmatch" " --icase-pathspecs" } -# Basic wildmat features -match 1 1 foo foo -match 0 0 foo bar -match 1 1 '' "" -match 1 1 foo '???' -match 0 0 foo '??' -match 1 1 foo '*' -match 1 1 foo 'f*' -match 0 0 foo '*f' -match 1 1 foo '*foo*' -match 1 1 foobar '*ob*a*r*' -match 1 1 aaaaaaabababab '*ab' -match 1 1 'foo*' 'foo\*' -match 0 0 foobar 'foo\*bar' -match 1 1 'f\oo' 'f\\oo' -match 1 1 ball '*[al]?' -match 0 0 ten '[ten]' -match 0 1 ten '**[!te]' -match 0 0 ten '**[!ten]' -match 1 1 ten 't[a-g]n' -match 0 0 ten 't[!a-g]n' -match 1 1 ton 't[!a-g]n' -match 1 1 ton 't[^a-g]n' -match 1 x 'a]b' 'a[]]b' -match 1 x a-b 'a[]-]b' -match 1 x 'a]b' 'a[]-]b' -match 0 x aab 'a[]-]b' -match 1 x aab 'a[]a-]b' -match 1 1 ']' ']' +# Basic wildmatch features +match 1 1 1 1 foo foo +match 0 0 0 0 foo bar +match 1 1 1 1 '' "" +match 1 1 1 1 foo '???' +match 0 0 0 0 foo '??' +match 1 1 1 1 foo '*' +match 1 1 1 1 foo 'f*' +match 0 0 0 0 foo '*f' +match 1 1 1 1 foo '*foo*' +match 1 1 1 1 foobar '*ob*a*r*' +match 1 1 1 1 aaaaaaabababab '*ab' +match 1 1 1 1 'foo*' 'foo\*' +match 0 0 0 0 foobar 'foo\*bar' +match 1 1 1 1 'f\oo' 'f\\oo' +match 1 1 1 1 ball '*[al]?' +match 0 0 0 0 ten '[ten]' +match 0 0 1 1 ten '**[!te]' +match 0 0 0 0 ten '**[!ten]' +match 1 1 1 1 ten 't[a-g]n' +match 0 0 0 0 ten 't[!a-g]n' +match 1 1 1 1 ton 't[!a-g]n' +match 1 1 1 1 ton 't[^a-g]n' +match 1 1 1 1 'a]b' 'a[]]b' +match 1 1 1 1 a-b 'a[]-]b' +match 1 1 1 1 'a]b' 'a[]-]b' +match 0 0 0 0 aab 'a[]-]b' +match 1 1 1 1 aab 'a[]a-]b' +match 1 1 1 1 ']' ']' # Extended slash-matching features -match 0 0 'foo/baz/bar' 'foo*bar' -match 0 0 'foo/baz/bar' 'foo**bar' -match 0 1 'foobazbar' 'foo**bar' -match 1 1 'foo/baz/bar' 'foo/**/bar' -match 1 0 'foo/baz/bar' 'foo/**/**/bar' -match 1 0 'foo/b/a/z/bar' 'foo/**/bar' -match 1 0 'foo/b/a/z/bar' 'foo/**/**/bar' -match 1 0 'foo/bar' 'foo/**/bar' -match 1 0 'foo/bar' 'foo/**/**/bar' -match 0 0 'foo/bar' 'foo?bar' -match 0 0 'foo/bar' 'foo[/]bar' -match 0 0 'foo/bar' 'foo[^a-z]bar' -match 0 0 'foo/bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' -match 1 1 'foo-bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' -match 1 0 'foo' '**/foo' -match 1 x 'XXX/foo' '**/foo' -match 1 0 'bar/baz/foo' '**/foo' -match 0 0 'bar/baz/foo' '*/foo' -match 0 0 'foo/bar/baz' '**/bar*' -match 1 0 'deep/foo/bar/baz' '**/bar/*' -match 0 0 'deep/foo/bar/baz/' '**/bar/*' -match 1 0 'deep/foo/bar/baz/' '**/bar/**' -match 0 0 'deep/foo/bar' '**/bar/*' -match 1 0 'deep/foo/bar/' '**/bar/**' -match 0 0 'foo/bar/baz' '**/bar**' -match 1 0 'foo/bar/baz/x' '*/bar/**' -match 0 0 'deep/foo/bar/baz/x' '*/bar/**' -match 1 0 'deep/foo/bar/baz/x' '**/bar/*/*' +match 0 0 1 1 'foo/baz/bar' 'foo*bar' +match 0 0 1 1 'foo/baz/bar' 'foo**bar' +match 0 0 1 1 'foobazbar' 'foo**bar' +match 1 1 1 1 'foo/baz/bar' 'foo/**/bar' +match 1 1 0 0 'foo/baz/bar' 'foo/**/**/bar' +match 1 1 1 1 'foo/b/a/z/bar' 'foo/**/bar' +match 1 1 1 1 'foo/b/a/z/bar' 'foo/**/**/bar' +match 1 1 0 0 'foo/bar' 'foo/**/bar' +match 1 1 0 0 'foo/bar' 'foo/**/**/bar' +match 0 0 1 1 'foo/bar' 'foo?bar' +match 0 0 1 1 'foo/bar' 'foo[/]bar' +match 0 0 1 1 'foo/bar' 'foo[^a-z]bar' +match 0 0 1 1 'foo/bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' +match 1 1 1 1 'foo-bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' +match 1 1 0 0 'foo' '**/foo' +match 1 1 1 1 'XXX/foo' '**/foo' +match 1 1 1 1 'bar/baz/foo' '**/foo' +match 0 0 1 1 'bar/baz/foo' '*/foo' +match 0 0 1 1 'foo/bar/baz' '**/bar*' +match 1 1 1 1 'deep/foo/bar/baz' '**/bar/*' +match 0 0 1 1 'deep/foo/bar/baz/' '**/bar/*' +match 1 1 1 1 'deep/foo/bar/baz/' '**/bar/**' +match 0 0 0 0 'deep/foo/bar' '**/bar/*' +match 1 1 1 1 'deep/foo/bar/' '**/bar/**' +match 0 0 1 1 'foo/bar/baz' '**/bar**' +match 1 1 1 1 'foo/bar/baz/x' '*/bar/**' +match 0 0 1 1 'deep/foo/bar/baz/x' '*/bar/**' +match 1 1 1 1 'deep/foo/bar/baz/x' '**/bar/*/*' # Various additional tests -match 0 0 'acrt' 'a[c-c]st' -match 1 1 'acrt' 'a[c-c]rt' -match 0 0 ']' '[!]-]' -match 1 x 'a' '[!]-]' -match 0 0 '' '\' -match 0 x '\' '\' -match 0 x 'XXX/\' '*/\' -match 1 x 'XXX/\' '*/\\' -match 1 1 'foo' 'foo' -match 1 1 '@foo' '@foo' -match 0 0 'foo' '@foo' -match 1 1 '[ab]' '\[ab]' -match 1 1 '[ab]' '[[]ab]' -match 1 x '[ab]' '[[:]ab]' -match 0 x '[ab]' '[[::]ab]' -match 1 x '[ab]' '[[:digit]ab]' -match 1 x '[ab]' '[\[:]ab]' -match 1 1 '?a?b' '\??\?b' -match 1 1 'abc' '\a\b\c' -match 0 0 'foo' '' -match 1 0 'foo/bar/baz/to' '**/t[o]' +match 0 0 0 0 'acrt' 'a[c-c]st' +match 1 1 1 1 'acrt' 'a[c-c]rt' +match 0 0 0 0 ']' '[!]-]' +match 1 1 1 1 'a' '[!]-]' +match 0 0 0 0 '' '\' +match 0 0 0 0 \ + 1 1 1 1 '\' '\' +match 0 0 0 0 'XXX/\' '*/\' +match 1 1 1 1 'XXX/\' '*/\\' +match 1 1 1 1 'foo' 'foo' +match 1 1 1 1 '@foo' '@foo' +match 0 0 0 0 'foo' '@foo' +match 1 1 1 1 '[ab]' '\[ab]' +match 1 1 1 1 '[ab]' '[[]ab]' +match 1 1 1 1 '[ab]' '[[:]ab]' +match 0 0 0 0 '[ab]' '[[::]ab]' +match 1 1 1 1 '[ab]' '[[:digit]ab]' +match 1 1 1 1 '[ab]' '[\[:]ab]' +match 1 1 1 1 '?a?b' '\??\?b' +match 1 1 1 1 'abc' '\a\b\c' +match 0 0 0 0 \ + E E E E 'foo' '' +match 1 1 1 1 'foo/bar/baz/to' '**/t[o]' # Character class tests -match 1 x 'a1B' '[[:alpha:]][[:digit:]][[:upper:]]' -match 0 x 'a' '[[:digit:][:upper:][:space:]]' -match 1 x 'A' '[[:digit:][:upper:][:space:]]' -match 1 x '1' '[[:digit:][:upper:][:space:]]' -match 0 x '1' '[[:digit:][:upper:][:spaci:]]' -match 1 x ' ' '[[:digit:][:upper:][:space:]]' -match 0 x '.' '[[:digit:][:upper:][:space:]]' -match 1 x '.' '[[:digit:][:punct:][:space:]]' -match 1 x '5' '[[:xdigit:]]' -match 1 x 'f' '[[:xdigit:]]' -match 1 x 'D' '[[:xdigit:]]' -match 1 x '_' '[[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:graph:][:lower:][:print:][:punct:][:space:][:upper:][:xdigit:]]' -match 1 x '.' '[^[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:lower:][:space:][:upper:][:xdigit:]]' -match 1 x '5' '[a-c[:digit:]x-z]' -match 1 x 'b' '[a-c[:digit:]x-z]' -match 1 x 'y' '[a-c[:digit:]x-z]' -match 0 x 'q' '[a-c[:digit:]x-z]' - -# Additional tests, including some malformed wildmats -match 1 x ']' '[\\-^]' -match 0 0 '[' '[\\-^]' -match 1 x '-' '[\-_]' -match 1 x ']' '[\]]' -match 0 0 '\]' '[\]]' -match 0 0 '\' '[\]]' -match 0 0 'ab' 'a[]b' -match 0 x 'a[]b' 'a[]b' -match 0 x 'ab[' 'ab[' -match 0 0 'ab' '[!' -match 0 0 'ab' '[-' -match 1 1 '-' '[-]' -match 0 0 '-' '[a-' -match 0 0 '-' '[!a-' -match 1 x '-' '[--A]' -match 1 x '5' '[--A]' -match 1 1 ' ' '[ --]' -match 1 1 '$' '[ --]' -match 1 1 '-' '[ --]' -match 0 0 '0' '[ --]' -match 1 x '-' '[---]' -match 1 x '-' '[------]' -match 0 0 'j' '[a-e-n]' -match 1 x '-' '[a-e-n]' -match 1 x 'a' '[!------]' -match 0 0 '[' '[]-a]' -match 1 x '^' '[]-a]' -match 0 0 '^' '[!]-a]' -match 1 x '[' '[!]-a]' -match 1 1 '^' '[a^bc]' -match 1 x '-b]' '[a-]b]' -match 0 0 '\' '[\]' -match 1 1 '\' '[\\]' -match 0 0 '\' '[!\\]' -match 1 1 'G' '[A-\\]' -match 0 0 'aaabbb' 'b*a' -match 0 0 'aabcaa' '*ba*' -match 1 1 ',' '[,]' -match 1 1 ',' '[\\,]' -match 1 1 '\' '[\\,]' -match 1 1 '-' '[,-.]' -match 0 0 '+' '[,-.]' -match 0 0 '-.]' '[,-.]' -match 1 1 '2' '[\1-\3]' -match 1 1 '3' '[\1-\3]' -match 0 0 '4' '[\1-\3]' -match 1 1 '\' '[[-\]]' -match 1 1 '[' '[[-\]]' -match 1 1 ']' '[[-\]]' -match 0 0 '-' '[[-\]]' +match 1 1 1 1 'a1B' '[[:alpha:]][[:digit:]][[:upper:]]' +match 0 1 0 1 'a' '[[:digit:][:upper:][:space:]]' +match 1 1 1 1 'A' '[[:digit:][:upper:][:space:]]' +match 1 1 1 1 '1' '[[:digit:][:upper:][:space:]]' +match 0 0 0 0 '1' '[[:digit:][:upper:][:spaci:]]' +match 1 1 1 1 ' ' '[[:digit:][:upper:][:space:]]' +match 0 0 0 0 '.' '[[:digit:][:upper:][:space:]]' +match 1 1 1 1 '.' '[[:digit:][:punct:][:space:]]' +match 1 1 1 1 '5' '[[:xdigit:]]' +match 1 1 1 1 'f' '[[:xdigit:]]' +match 1 1 1 1 'D' '[[:xdigit:]]' +match 1 1 1 1 '_' '[[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:graph:][:lower:][:print:][:punct:][:space:][:upper:][:xdigit:]]' +match 1 1 1 1 '.' '[^[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:lower:][:space:][:upper:][:xdigit:]]' +match 1 1 1 1 '5' '[a-c[:digit:]x-z]' +match 1 1 1 1 'b' '[a-c[:digit:]x-z]' +match 1 1 1 1 'y' '[a-c[:digit:]x-z]' +match 0 0 0 0 'q' '[a-c[:digit:]x-z]' -# Test recursion and the abort code (use "wildtest -i" to see iteration counts) -match 1 1 '-adobe-courier-bold-o-normal--12-120-75-75-m-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' -match 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-X-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' -match 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-/-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' -match 1 1 'XXX/adobe/courier/bold/o/normal//12/120/75/75/m/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' -match 0 0 'XXX/adobe/courier/bold/o/normal//12/120/75/75/X/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' -match 1 0 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txt' '**/*a*b*g*n*t' -match 0 0 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txtz' '**/*a*b*g*n*t' -match 0 x foo '*/*/*' -match 0 x foo/bar '*/*/*' -match 1 x foo/bba/arr '*/*/*' -match 0 x foo/bb/aa/rr '*/*/*' -match 1 x foo/bb/aa/rr '**/**/**' -match 1 x abcXdefXghi '*X*i' -match 0 x ab/cXd/efXg/hi '*X*i' -match 1 x ab/cXd/efXg/hi '*/*X*/*/*i' -match 1 x ab/cXd/efXg/hi '**/*X*/**/*i' +# Additional tests, including some malformed wildmatch patterns +match 1 1 1 1 ']' '[\\-^]' +match 0 0 0 0 '[' '[\\-^]' +match 1 1 1 1 '-' '[\-_]' +match 1 1 1 1 ']' '[\]]' +match 0 0 0 0 '\]' '[\]]' +match 0 0 0 0 '\' '[\]]' +match 0 0 0 0 'ab' 'a[]b' +match 0 0 0 0 \ + 1 1 1 1 'a[]b' 'a[]b' +match 0 0 0 0 \ + 1 1 1 1 'ab[' 'ab[' +match 0 0 0 0 'ab' '[!' +match 0 0 0 0 'ab' '[-' +match 1 1 1 1 '-' '[-]' +match 0 0 0 0 '-' '[a-' +match 0 0 0 0 '-' '[!a-' +match 1 1 1 1 '-' '[--A]' +match 1 1 1 1 '5' '[--A]' +match 1 1 1 1 ' ' '[ --]' +match 1 1 1 1 '$' '[ --]' +match 1 1 1 1 '-' '[ --]' +match 0 0 0 0 '0' '[ --]' +match 1 1 1 1 '-' '[---]' +match 1 1 1 1 '-' '[------]' +match 0 0 0 0 'j' '[a-e-n]' +match 1 1 1 1 '-' '[a-e-n]' +match 1 1 1 1 'a' '[!------]' +match 0 0 0 0 '[' '[]-a]' +match 1 1 1 1 '^' '[]-a]' +match 0 0 0 0 '^' '[!]-a]' +match 1 1 1 1 '[' '[!]-a]' +match 1 1 1 1 '^' '[a^bc]' +match 1 1 1 1 '-b]' '[a-]b]' +match 0 0 0 0 '\' '[\]' +match 1 1 1 1 '\' '[\\]' +match 0 0 0 0 '\' '[!\\]' +match 1 1 1 1 'G' '[A-\\]' +match 0 0 0 0 'aaabbb' 'b*a' +match 0 0 0 0 'aabcaa' '*ba*' +match 1 1 1 1 ',' '[,]' +match 1 1 1 1 ',' '[\\,]' +match 1 1 1 1 '\' '[\\,]' +match 1 1 1 1 '-' '[,-.]' +match 0 0 0 0 '+' '[,-.]' +match 0 0 0 0 '-.]' '[,-.]' +match 1 1 1 1 '2' '[\1-\3]' +match 1 1 1 1 '3' '[\1-\3]' +match 0 0 0 0 '4' '[\1-\3]' +match 1 1 1 1 '\' '[[-\]]' +match 1 1 1 1 '[' '[[-\]]' +match 1 1 1 1 ']' '[[-\]]' +match 0 0 0 0 '-' '[[-\]]' -pathmatch 1 foo foo -pathmatch 0 foo fo -pathmatch 1 foo/bar foo/bar -pathmatch 1 foo/bar 'foo/*' -pathmatch 1 foo/bba/arr 'foo/*' -pathmatch 1 foo/bba/arr 'foo/**' -pathmatch 1 foo/bba/arr 'foo*' -pathmatch 1 foo/bba/arr 'foo**' -pathmatch 1 foo/bba/arr 'foo/*arr' -pathmatch 1 foo/bba/arr 'foo/**arr' -pathmatch 0 foo/bba/arr 'foo/*z' -pathmatch 0 foo/bba/arr 'foo/**z' -pathmatch 1 foo/bar 'foo?bar' -pathmatch 1 foo/bar 'foo[/]bar' -pathmatch 1 foo/bar 'foo[^a-z]bar' -pathmatch 0 foo '*/*/*' -pathmatch 0 foo/bar '*/*/*' -pathmatch 1 foo/bba/arr '*/*/*' -pathmatch 1 foo/bb/aa/rr '*/*/*' -pathmatch 1 abcXdefXghi '*X*i' -pathmatch 1 ab/cXd/efXg/hi '*/*X*/*/*i' -pathmatch 1 ab/cXd/efXg/hi '*Xg*i' +# Test recursion +match 1 1 1 1 '-adobe-courier-bold-o-normal--12-120-75-75-m-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' +match 0 0 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-X-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' +match 0 0 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-/-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' +match 1 1 1 1 'XXX/adobe/courier/bold/o/normal//12/120/75/75/m/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' +match 0 0 0 0 'XXX/adobe/courier/bold/o/normal//12/120/75/75/X/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' +match 1 1 1 1 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txt' '**/*a*b*g*n*t' +match 0 0 0 0 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txtz' '**/*a*b*g*n*t' +match 0 0 0 0 foo '*/*/*' +match 0 0 0 0 foo/bar '*/*/*' +match 1 1 1 1 foo/bba/arr '*/*/*' +match 0 0 1 1 foo/bb/aa/rr '*/*/*' +match 1 1 1 1 foo/bb/aa/rr '**/**/**' +match 1 1 1 1 abcXdefXghi '*X*i' +match 0 0 1 1 ab/cXd/efXg/hi '*X*i' +match 1 1 1 1 ab/cXd/efXg/hi '*/*X*/*/*i' +match 1 1 1 1 ab/cXd/efXg/hi '**/*X*/**/*i' -# Case-sensitivity features -match 0 x 'a' '[A-Z]' -match 1 x 'A' '[A-Z]' -match 0 x 'A' '[a-z]' -match 1 x 'a' '[a-z]' -match 0 x 'a' '[[:upper:]]' -match 1 x 'A' '[[:upper:]]' -match 0 x 'A' '[[:lower:]]' -match 1 x 'a' '[[:lower:]]' -match 0 x 'A' '[B-Za]' -match 1 x 'a' '[B-Za]' -match 0 x 'A' '[B-a]' -match 1 x 'a' '[B-a]' -match 0 x 'z' '[Z-y]' -match 1 x 'Z' '[Z-y]' +# Extra pathmatch tests +match 0 0 0 0 foo fo +match 1 1 1 1 foo/bar foo/bar +match 1 1 1 1 foo/bar 'foo/*' +match 0 0 1 1 foo/bba/arr 'foo/*' +match 1 1 1 1 foo/bba/arr 'foo/**' +match 0 0 1 1 foo/bba/arr 'foo*' +match 0 0 1 1 \ + 1 1 1 1 foo/bba/arr 'foo**' +match 0 0 1 1 foo/bba/arr 'foo/*arr' +match 0 0 1 1 foo/bba/arr 'foo/**arr' +match 0 0 0 0 foo/bba/arr 'foo/*z' +match 0 0 0 0 foo/bba/arr 'foo/**z' +match 0 0 1 1 foo/bar 'foo?bar' +match 0 0 1 1 foo/bar 'foo[/]bar' +match 0 0 1 1 foo/bar 'foo[^a-z]bar' +match 0 0 1 1 ab/cXd/efXg/hi '*Xg*i' -imatch 1 'a' '[A-Z]' -imatch 1 'A' '[A-Z]' -imatch 1 'A' '[a-z]' -imatch 1 'a' '[a-z]' -imatch 1 'a' '[[:upper:]]' -imatch 1 'A' '[[:upper:]]' -imatch 1 'A' '[[:lower:]]' -imatch 1 'a' '[[:lower:]]' -imatch 1 'A' '[B-Za]' -imatch 1 'a' '[B-Za]' -imatch 1 'A' '[B-a]' -imatch 1 'a' '[B-a]' -imatch 1 'z' '[Z-y]' -imatch 1 'Z' '[Z-y]' +# Extra case-sensitivity tests +match 0 1 0 1 'a' '[A-Z]' +match 1 1 1 1 'A' '[A-Z]' +match 0 1 0 1 'A' '[a-z]' +match 1 1 1 1 'a' '[a-z]' +match 0 1 0 1 'a' '[[:upper:]]' +match 1 1 1 1 'A' '[[:upper:]]' +match 0 1 0 1 'A' '[[:lower:]]' +match 1 1 1 1 'a' '[[:lower:]]' +match 0 1 0 1 'A' '[B-Za]' +match 1 1 1 1 'a' '[B-Za]' +match 0 1 0 1 'A' '[B-a]' +match 1 1 1 1 'a' '[B-a]' +match 0 1 0 1 'z' '[Z-y]' +match 1 1 1 1 'Z' '[Z-y]' test_done diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 503a88d029..6c0b7ea4ad 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -528,7 +528,7 @@ test_expect_success 'git branch -c -f o/q o/p should work when o/p exists' ' git branch -c -f o/q o/p ' -test_expect_success 'git branch -c qq rr/qq should fail when r exists' ' +test_expect_success 'git branch -c qq rr/qq should fail when rr exists' ' git branch qq && git branch rr && test_must_fail git branch -c qq rr/qq diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 8ac58d5ea5..72d9564747 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -277,4 +277,38 @@ EOF test_cmp From_.msg out ' +test_expect_success 'rebase--am.sh and --show-current-patch' ' + test_create_repo conflict-apply && + ( + cd conflict-apply && + test_commit init && + echo one >>init.t && + git commit -a -m one && + echo two >>init.t && + git commit -a -m two && + git tag two && + test_must_fail git rebase --onto init HEAD^ && + GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && + grep "show.*$(git rev-parse two)" stderr + ) +' + +test_expect_success 'rebase--merge.sh and --show-current-patch' ' + test_create_repo conflict-merge && + ( + cd conflict-merge && + test_commit init && + echo one >>init.t && + git commit -a -m one && + echo two >>init.t && + git commit -a -m two && + git tag two && + test_must_fail git rebase --merge --onto init HEAD^ && + git rebase --show-current-patch >actual.patch && + GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && + grep "show.*REBASE_HEAD" stderr && + test "$(git rev-parse REBASE_HEAD)" = "$(git rev-parse two)" + ) +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 481a350090..3b905406df 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -225,6 +225,14 @@ test_expect_success 'stop on conflicting pick' ' test 0 = $(grep -c "^[^#]" < .git/rebase-merge/git-rebase-todo) ' +test_expect_success 'show conflicted patch' ' + GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && + grep "show.*REBASE_HEAD" stderr && + # the original stopped-sha1 is abbreviated + stopped_sha1="$(git rev-parse $(cat ".git/rebase-merge/stopped-sha"))" && + test "$(git rev-parse REBASE_HEAD)" = "$stopped_sha1" +' + test_expect_success 'abort' ' git rebase --abort && test $(git rev-parse new-branch1) = $(git rev-parse HEAD) && @@ -453,6 +461,10 @@ test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messa git rebase -i $base && git cat-file commit HEAD | sed -e 1,/^\$/d > actual-squash-fixup && test_cmp expect-squash-fixup actual-squash-fixup && + git cat-file commit HEAD@{2} | + grep "^# This is a combination of 3 commits\." && + git cat-file commit HEAD@{3} | + grep "^# This is a combination of 2 commits\." && git checkout to-be-rebased && git branch -D squash-fixup ' @@ -1336,6 +1348,16 @@ test_expect_success 'editor saves as CR/LF' ' SQ="'" test_expect_success 'rebase -i --gpg-sign=<key-id>' ' + test_when_finished "test_might_fail git rebase --abort" && + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ + >out 2>err && + test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err +' + +test_expect_success 'rebase -i --gpg-sign=<key-id> overrides commit.gpgSign' ' + test_when_finished "test_might_fail git rebase --abort" && + test_config commit.gpgsign true && set_fake_editor && FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ >out 2>err && diff --git a/t/t3405-rebase-malformed.sh b/t/t3405-rebase-malformed.sh index ff8c360cd5..cb7c6de84a 100755 --- a/t/t3405-rebase-malformed.sh +++ b/t/t3405-rebase-malformed.sh @@ -3,6 +3,7 @@ test_description='rebase should handle arbitrary git message' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh cat >F <<\EOF This is an example of a commit log message @@ -25,6 +26,7 @@ test_expect_success setup ' test_tick && git commit -m "Initial commit" && git branch diff-in-message && + git branch empty-message-merge && git checkout -b multi-line-subject && cat F >file2 && @@ -45,6 +47,11 @@ test_expect_success setup ' git cat-file commit HEAD | sed -e "1,/^\$/d" >G0 && + git checkout empty-message-merge && + echo file3 >file3 && + git add file3 && + git commit --allow-empty-message -m "" && + git checkout master && echo One >file1 && @@ -69,4 +76,20 @@ test_expect_success 'rebase commit with diff in message' ' test_cmp G G0 ' +test_expect_success 'rebase -m commit with empty message' ' + test_must_fail git rebase -m master empty-message-merge && + git rebase --abort && + git rebase -m --allow-empty-message master empty-message-merge +' + +test_expect_success 'rebase -i commit with empty message' ' + git checkout diff-in-message && + set_fake_editor && + test_must_fail env FAKE_COMMIT_MESSAGE=" " FAKE_LINES="reword 1" \ + git rebase -i HEAD^ && + git rebase --abort && + FAKE_COMMIT_MESSAGE=" " FAKE_LINES="reword 1" \ + git rebase -i --allow-empty-message HEAD^ +' + test_done diff --git a/t/t3408-rebase-multi-line.sh b/t/t3408-rebase-multi-line.sh index 6b84e6042a..e7292f5b9b 100755 --- a/t/t3408-rebase-multi-line.sh +++ b/t/t3408-rebase-multi-line.sh @@ -24,8 +24,23 @@ But otherwise with a sane description." && >elif && git add elif && test_tick && - git commit -m second + git commit -m second && + git checkout -b side2 && + >afile && + git add afile && + test_tick && + git commit -m third && + echo hello >afile && + test_tick && + git commit -a -m fourth && + git checkout -b side-merge && + git reset --hard HEAD^^ && + git merge --no-ff -m "A merge commit log message that has a long +summary that spills over multiple lines. + +But otherwise with a sane description." side2 && + git branch side-merge-original ' test_expect_success rebase ' @@ -37,5 +52,14 @@ test_expect_success rebase ' test_cmp expect actual ' +test_expect_success rebasep ' + + git checkout side-merge && + git rebase -p side && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + git cat-file commit side-merge-original | sed -e "1,/^\$/d" >expect && + test_cmp expect actual + +' test_done diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index 4f2a263b63..783bdbf59d 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -141,7 +141,7 @@ test_expect_success 'cherry-pick "-" works with arguments' ' test_cmp expect actual ' -test_expect_success 'cherry-pick works with dirty renamed file' ' +test_expect_failure 'cherry-pick works with dirty renamed file' ' test_commit to-rename && git checkout -b unrelated && test_commit unrelated && @@ -150,7 +150,10 @@ test_expect_success 'cherry-pick works with dirty renamed file' ' test_tick && git commit -m renamed && echo modified >renamed && - git cherry-pick refs/heads/unrelated + test_must_fail git cherry-pick refs/heads/unrelated >out && + test_i18ngrep "Refusing to lose dirty file at renamed" out && + test $(git rev-parse :0:renamed) = $(git rev-parse HEAD^:to-rename.t) && + grep -q "^modified$" renamed ' test_done diff --git a/t/t3512-cherry-pick-submodule.sh b/t/t3512-cherry-pick-submodule.sh index ce48c4fcca..bd78287841 100755 --- a/t/t3512-cherry-pick-submodule.sh +++ b/t/t3512-cherry-pick-submodule.sh @@ -5,7 +5,6 @@ test_description='cherry-pick can handle submodules' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-submodule-update.sh -KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 test_submodule_switch "git cherry-pick" diff --git a/t/t3513-revert-submodule.sh b/t/t3513-revert-submodule.sh index db9378142a..5e39fcdb66 100755 --- a/t/t3513-revert-submodule.sh +++ b/t/t3513-revert-submodule.sh @@ -25,7 +25,6 @@ git_revert () { git revert HEAD } -KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 test_submodule_switch "git_revert" diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index 058698df6a..b170fb02b8 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -10,6 +10,19 @@ then test_done fi +diff_cmp () { + for x + do + sed -e '/^index/s/[0-9a-f]*[1-9a-f][0-9a-f]*\.\./1234567../' \ + -e '/^index/s/\.\.[0-9a-f]*[1-9a-f][0-9a-f]*/..9abcdef/' \ + -e '/^index/s/ 00*\.\./ 0000000../' \ + -e '/^index/s/\.\.00*$/..0000000/' \ + -e '/^index/s/\.\.00* /..0000000 /' \ + "$x" >"$x.filtered" + done + test_cmp "$1.filtered" "$2.filtered" +} + test_expect_success 'setup (initial)' ' echo content >file && git add file && @@ -22,20 +35,20 @@ test_expect_success 'status works (initial)' ' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -new file mode 100644 -index 0000000..d95f3ad ---- /dev/null -+++ b/file -@@ -0,0 +1 @@ -+content -EOF + cat >expected <<-\EOF + new file mode 100644 + index 0000000..d95f3ad + --- /dev/null + +++ b/file + @@ -0,0 +1 @@ + +content + EOF ' test_expect_success 'diff works (initial)' ' (echo d; echo 1) | git add -i >output && sed -ne "/new file/,/content/p" <output >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'revert works (initial)' ' git add file && @@ -59,20 +72,20 @@ test_expect_success 'status works (commit)' ' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -index 180b47c..b6f2c08 100644 ---- a/file -+++ b/file -@@ -1 +1,2 @@ - baseline -+content -EOF + cat >expected <<-\EOF + index 180b47c..b6f2c08 100644 + --- a/file + +++ b/file + @@ -1 +1,2 @@ + baseline + +content + EOF ' test_expect_success 'diff works (commit)' ' (echo d; echo 1) | git add -i >output && sed -ne "/^index/,/content/p" <output >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'revert works (commit)' ' git add file && @@ -83,39 +96,32 @@ test_expect_success 'revert works (commit)' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -EOF -' - -test_expect_success 'setup fake editor' ' - >fake_editor.sh && - chmod a+x fake_editor.sh && - test_set_editor "$(pwd)/fake_editor.sh" + cat >expected <<-\EOF + EOF ' test_expect_success 'dummy edit works' ' + test_set_editor : && (echo e; echo a) | git add -p && git diff > diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'setup patch' ' -cat >patch <<EOF -@@ -1,1 +1,4 @@ - this -+patch --does not - apply -EOF + cat >patch <<-\EOF + @@ -1,1 +1,4 @@ + this + +patch + -does not + apply + EOF ' test_expect_success 'setup fake editor' ' - echo "#!$SHELL_PATH" >fake_editor.sh && - cat >>fake_editor.sh <<\EOF && -mv -f "$1" oldpatch && -mv -f patch "$1" -EOF - chmod a+x fake_editor.sh && + write_script "fake_editor.sh" <<-\EOF && + mv -f "$1" oldpatch && + mv -f patch "$1" + EOF test_set_editor "$(pwd)/fake_editor.sh" ' @@ -126,10 +132,10 @@ test_expect_success 'bad edit rejected' ' ' test_expect_success 'setup patch' ' -cat >patch <<EOF -this patch -is garbage -EOF + cat >patch <<-\EOF + this patch + is garbage + EOF ' test_expect_success 'garbage edit rejected' ' @@ -139,34 +145,34 @@ test_expect_success 'garbage edit rejected' ' ' test_expect_success 'setup patch' ' -cat >patch <<EOF -@@ -1,0 +1,0 @@ - baseline -+content -+newcontent -+lines -EOF + cat >patch <<-\EOF + @@ -1,0 +1,0 @@ + baseline + +content + +newcontent + +lines + EOF ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/file b/file -index b5dd6c9..f910ae9 100644 ---- a/file -+++ b/file -@@ -1,4 +1,4 @@ - baseline - content --newcontent -+more - lines -EOF + cat >expected <<-\EOF + diff --git a/file b/file + index b5dd6c9..f910ae9 100644 + --- a/file + +++ b/file + @@ -1,4 +1,4 @@ + baseline + content + -newcontent + +more + lines + EOF ' test_expect_success 'real edit works' ' (echo e; echo n; echo d) | git add -p && git diff >output && - test_cmp expected output + diff_cmp expected output ' test_expect_success 'skip files similarly as commit -a' ' @@ -178,7 +184,7 @@ test_expect_success 'skip files similarly as commit -a' ' git reset && git commit -am commit && git diff >expected && - test_cmp expected output && + diff_cmp expected output && git reset --hard HEAD^ ' rm -f .gitignore @@ -222,52 +228,67 @@ test_expect_success 'setup again' ' # Write the patch file with a new line at the top and bottom test_expect_success 'setup patch' ' -cat >patch <<EOF -index 180b47c..b6f2c08 100644 ---- a/file -+++ b/file -@@ -1,2 +1,4 @@ -+firstline - baseline - content -+lastline -EOF -' - -# Expected output, similar to the patch but w/ diff at the top + cat >patch <<-\EOF + index 180b47c..b6f2c08 100644 + --- a/file + +++ b/file + @@ -1,2 +1,4 @@ + +firstline + baseline + content + +lastline + \ No newline at end of file + EOF +' + +# Expected output, diff is similar to the patch but w/ diff at the top test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/file b/file -index b6f2c08..61b9053 100755 ---- a/file -+++ b/file -@@ -1,2 +1,4 @@ -+firstline - baseline - content -+lastline -EOF + echo diff --git a/file b/file >expected && + cat patch |sed "/^index/s/ 100644/ 100755/" >>expected && + cat >expected-output <<-\EOF + --- a/file + +++ b/file + @@ -1,2 +1,4 @@ + +firstline + baseline + content + +lastline + \ No newline at end of file + @@ -1,2 +1,3 @@ + +firstline + baseline + content + @@ -1,2 +2,3 @@ + baseline + content + +lastline + \ No newline at end of file + EOF ' # Test splitting the first patch, then adding both -test_expect_success 'add first line works' ' +test_expect_success C_LOCALE_OUTPUT 'add first line works' ' git commit -am "clear local changes" && git apply patch && - (echo s; echo y; echo y) | git add -p file && - git diff --cached > diff && - test_cmp expected diff + printf "%s\n" s y y | git add -p file 2>error | + sed -n -e "s/^Stage this hunk[^@]*\(@@ .*\)/\1/" \ + -e "/^[-+@ \\\\]"/p >output && + test_must_be_empty error && + git diff --cached >diff && + diff_cmp expected diff && + test_cmp expected-output output ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/non-empty b/non-empty -deleted file mode 100644 -index d95f3ad..0000000 ---- a/non-empty -+++ /dev/null -@@ -1 +0,0 @@ --content -EOF + cat >expected <<-\EOF + diff --git a/non-empty b/non-empty + deleted file mode 100644 + index d95f3ad..0000000 + --- a/non-empty + +++ /dev/null + @@ -1 +0,0 @@ + -content + EOF ' test_expect_success 'deleting a non-empty file' ' @@ -278,15 +299,15 @@ test_expect_success 'deleting a non-empty file' ' rm non-empty && echo y | git add -p non-empty && git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/empty b/empty -deleted file mode 100644 -index e69de29..0000000 -EOF + cat >expected <<-\EOF + diff --git a/empty b/empty + deleted file mode 100644 + index e69de29..0000000 + EOF ' test_expect_success 'deleting an empty file' ' @@ -297,23 +318,17 @@ test_expect_success 'deleting an empty file' ' rm empty && echo y | git add -p empty && git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'split hunk setup' ' git reset --hard && - for i in 10 20 30 40 50 60 - do - echo $i - done >test && + test_write_lines 10 20 30 40 50 60 >test && git add test && test_tick && git commit -m test && - for i in 10 15 20 21 22 23 24 30 40 50 60 - do - echo $i - done >test + test_write_lines 10 15 20 21 22 23 24 30 40 50 60 >test ' test_expect_success 'split hunk "add -p (edit)"' ' @@ -334,17 +349,7 @@ test_expect_success 'split hunk "add -p (edit)"' ' ' test_expect_failure 'split hunk "add -p (no, yes, edit)"' ' - cat >test <<-\EOF && - 5 - 10 - 20 - 21 - 30 - 31 - 40 - 50 - 60 - EOF + test_write_lines 5 10 20 21 30 31 40 50 60 >test && git reset && # test sequence is s(plit), n(o), y(es), e(dit) # q n q q is there to make sure we exit at the end. @@ -378,7 +383,7 @@ test_expect_success 'patch mode ignores unmerged entries' ' +changed EOF git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success TTY 'diffs can be colorized' ' @@ -392,6 +397,26 @@ test_expect_success TTY 'diffs can be colorized' ' grep "$(printf "\\033")" output ' +test_expect_success TTY 'diffFilter filters diff' ' + git reset --hard && + + echo content >test && + test_config interactive.diffFilter "sed s/^/foo:/" && + printf y | test_terminal git add -p >output 2>&1 && + + # avoid depending on the exact coloring or content of the prompts, + # and just make sure we saw our diff prefixed + grep foo:.*content output +' + +test_expect_success TTY 'detect bogus diffFilter output' ' + git reset --hard && + + echo content >test && + test_config interactive.diffFilter "echo too-short" && + printf y | test_must_fail test_terminal git add -p +' + test_expect_success 'patch-mode via -i prompts for files' ' git reset --hard && @@ -407,7 +432,7 @@ test_expect_success 'patch-mode via -i prompts for files' ' echo test >expect && git diff --cached --name-only >actual && - test_cmp expect actual + diff_cmp expect actual ' test_expect_success 'add -p handles globs' ' @@ -541,4 +566,34 @@ test_expect_success 'status ignores dirty submodules (except HEAD)' ' ! grep dirty-otherwise output ' +test_expect_success 'set up pathological context' ' + git reset --hard && + test_write_lines a a a a a a a a a a a >a && + git add a && + git commit -m a && + test_write_lines c b a a a a a a a b a a a a >a && + test_write_lines a a a a a a a b a a a a >expected-1 && + test_write_lines b a a a a a a a b a a a a >expected-2 && + # check editing can cope with missing header and deleted context lines + # as well as changes to other lines + test_write_lines +b " a" >patch +' + +test_expect_success 'add -p works with pathological context lines' ' + git reset && + printf "%s\n" n y | + git add -p && + git cat-file blob :a >actual && + test_cmp expected-1 actual +' + +test_expect_success 'add -p patch editing works with pathological context lines' ' + git reset && + # n q q below is in case edit fails + printf "%s\n" e y n q q | + git add -p && + git cat-file blob :a >actual && + test_cmp expected-2 actual +' + test_done diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index f10798b2df..3f9a24fd56 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -361,6 +361,11 @@ diff --no-index --raw dir2 dir diff --no-index --raw --abbrev=4 dir2 dir :noellipses diff --no-index --raw --abbrev=4 dir2 dir diff --no-index --raw --no-abbrev dir2 dir + +diff-tree --pretty --root --stat --compact-summary initial +diff-tree --pretty -R --root --stat --compact-summary initial +diff-tree --stat --compact-summary initial mode +diff-tree -R --stat --compact-summary initial mode EOF test_expect_success 'log -S requires an argument' ' diff --git a/t/t4013/diff.diff-tree_--pretty_--root_--stat_--compact-summary_initial b/t/t4013/diff.diff-tree_--pretty_--root_--stat_--compact-summary_initial new file mode 100644 index 0000000000..d6451ff7cc --- /dev/null +++ b/t/t4013/diff.diff-tree_--pretty_--root_--stat_--compact-summary_initial @@ -0,0 +1,12 @@ +$ git diff-tree --pretty --root --stat --compact-summary initial +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial + + dir/sub (new) | 2 ++ + file0 (new) | 3 +++ + file2 (new) | 3 +++ + 3 files changed, 8 insertions(+) +$ diff --git a/t/t4013/diff.diff-tree_--pretty_-R_--root_--stat_--compact-summary_initial b/t/t4013/diff.diff-tree_--pretty_-R_--root_--stat_--compact-summary_initial new file mode 100644 index 0000000000..1989e55cd0 --- /dev/null +++ b/t/t4013/diff.diff-tree_--pretty_-R_--root_--stat_--compact-summary_initial @@ -0,0 +1,12 @@ +$ git diff-tree --pretty -R --root --stat --compact-summary initial +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial + + dir/sub (gone) | 2 -- + file0 (gone) | 3 --- + file2 (gone) | 3 --- + 3 files changed, 8 deletions(-) +$ diff --git a/t/t4013/diff.diff-tree_--stat_--compact-summary_initial_mode b/t/t4013/diff.diff-tree_--stat_--compact-summary_initial_mode new file mode 100644 index 0000000000..9c7c8f63af --- /dev/null +++ b/t/t4013/diff.diff-tree_--stat_--compact-summary_initial_mode @@ -0,0 +1,4 @@ +$ git diff-tree --stat --compact-summary initial mode + file0 (mode +x) | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) +$ diff --git a/t/t4013/diff.diff-tree_-R_--stat_--compact-summary_initial_mode b/t/t4013/diff.diff-tree_-R_--stat_--compact-summary_initial_mode new file mode 100644 index 0000000000..e38f3d3bfb --- /dev/null +++ b/t/t4013/diff.diff-tree_-R_--stat_--compact-summary_initial_mode @@ -0,0 +1,4 @@ +$ git diff-tree -R --stat --compact-summary initial mode + file0 (mode -x) | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) +$ diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index 1795ffc3aa..22f9f88f0a 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -33,6 +33,7 @@ diffpatterns=" css fortran fountain + golang html java matlab diff --git a/t/t4018/golang-complex-function b/t/t4018/golang-complex-function new file mode 100644 index 0000000000..e057dcefed --- /dev/null +++ b/t/t4018/golang-complex-function @@ -0,0 +1,8 @@ +type Test struct { + a Type +} + +func (t *Test) RIGHT(a Type) (Type, error) { + t.a = a + return ChangeMe, nil +} diff --git a/t/t4018/golang-func b/t/t4018/golang-func new file mode 100644 index 0000000000..8e9c9ac7c3 --- /dev/null +++ b/t/t4018/golang-func @@ -0,0 +1,4 @@ +func RIGHT() { + a := 5 + b := ChangeMe +} diff --git a/t/t4018/golang-interface b/t/t4018/golang-interface new file mode 100644 index 0000000000..553bedec96 --- /dev/null +++ b/t/t4018/golang-interface @@ -0,0 +1,4 @@ +type RIGHT interface { + a() Type + b() ChangeMe +} diff --git a/t/t4018/golang-long-func b/t/t4018/golang-long-func new file mode 100644 index 0000000000..ac3a77b5c4 --- /dev/null +++ b/t/t4018/golang-long-func @@ -0,0 +1,5 @@ +func RIGHT(aVeryVeryVeryLongVariableName AVeryVeryVeryLongType, + anotherLongVariableName AnotherLongType) { + a := 5 + b := ChangeMe +} diff --git a/t/t4018/golang-struct b/t/t4018/golang-struct new file mode 100644 index 0000000000..5deda77fee --- /dev/null +++ b/t/t4018/golang-struct @@ -0,0 +1,4 @@ +type RIGHT struct { + a Type + b ChangeMe +} diff --git a/t/t4052-stat-output.sh b/t/t4052-stat-output.sh index 9f563db20a..6e2cf933f7 100755 --- a/t/t4052-stat-output.sh +++ b/t/t4052-stat-output.sh @@ -19,17 +19,33 @@ test_expect_success 'preparation' ' git commit -m message "$name" ' +cat >expect72 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +test_expect_success "format-patch: small change with long name gives more space to the name" ' + git format-patch -1 --stdout >output && + grep " | " output >actual && + test_cmp expect72 actual +' + while read cmd args do - cat >expect <<-'EOF' + cat >expect80 <<-'EOF' ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + EOF test_expect_success "$cmd: small change with long name gives more space to the name" ' git $cmd $args >output && grep " | " output >actual && - test_cmp expect actual + test_cmp expect80 actual ' +done <<\EOF +diff HEAD^ HEAD --stat +show --stat +log -1 --stat +EOF +while read cmd args +do cat >expect <<-'EOF' ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + EOF @@ -79,11 +95,11 @@ test_expect_success 'preparation for big change tests' ' git commit -m message abcd ' -cat >expect80 <<'EOF' - abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +cat >expect72 <<'EOF' + abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF -cat >expect80-graph <<'EOF' -| abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +cat >expect72-graph <<'EOF' +| abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF cat >expect200 <<'EOF' abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ @@ -107,7 +123,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect200 diff HEAD^ HEAD --stat respects expect200 show --stat respects expect200 log -1 --stat @@ -135,7 +151,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect40 diff HEAD^ HEAD --stat respects expect40 show --stat respects expect40 log -1 --stat @@ -163,7 +179,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect40 diff HEAD^ HEAD --stat respects expect40 show --stat respects expect40 log -1 --stat @@ -250,11 +266,11 @@ show --stat log -1 --stat EOF -cat >expect80 <<'EOF' - ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++++++++++ +cat >expect72 <<'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++ EOF -cat >expect80-graph <<'EOF' -| ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++++++++++ +cat >expect72-graph <<'EOF' +| ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++ EOF cat >expect200 <<'EOF' aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ @@ -278,7 +294,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect200 diff HEAD^ HEAD --stat respects expect200 show --stat respects expect200 log -1 --stat @@ -308,7 +324,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect1 diff HEAD^ HEAD --stat respects expect1 show --stat respects expect1 log -1 --stat diff --git a/t/t4064-diff-oidfind.sh b/t/t4064-diff-oidfind.sh new file mode 100755 index 0000000000..3bdf317af8 --- /dev/null +++ b/t/t4064-diff-oidfind.sh @@ -0,0 +1,68 @@ +#!/bin/sh + +test_description='test finding specific blobs in the revision walking' +. ./test-lib.sh + +test_expect_success 'setup ' ' + git commit --allow-empty -m "empty initial commit" && + + echo "Hello, world!" >greeting && + git add greeting && + git commit -m "add the greeting blob" && # borrowed from Git from the Bottom Up + git tag -m "the blob" greeting $(git rev-parse HEAD:greeting) && + + echo asdf >unrelated && + git add unrelated && + git commit -m "unrelated history" && + + git revert HEAD^ && + + git commit --allow-empty -m "another unrelated commit" +' + +test_expect_success 'find the greeting blob' ' + cat >expect <<-EOF && + Revert "add the greeting blob" + add the greeting blob + EOF + + git log --format=%s --find-object=greeting^{blob} >actual && + + test_cmp expect actual +' + +test_expect_success 'setup a tree' ' + mkdir a && + echo asdf >a/file && + git add a/file && + git commit -m "add a file in a subdirectory" +' + +test_expect_success 'find a tree' ' + cat >expect <<-EOF && + add a file in a subdirectory + EOF + + git log --format=%s -t --find-object=HEAD:a >actual && + + test_cmp expect actual +' + +test_expect_success 'setup a submodule' ' + test_create_repo sub && + test_commit -C sub sub && + git submodule add ./sub sub && + git commit -a -m "add sub" +' + +test_expect_success 'find a submodule' ' + cat >expect <<-EOF && + add sub + EOF + + git log --format=%s --find-object=HEAD:sub >actual && + + test_cmp expect actual +' + +test_done diff --git a/t/t4135-apply-weird-filenames.sh b/t/t4135-apply-weird-filenames.sh index 27cb0009fb..c7c688fcc4 100755 --- a/t/t4135-apply-weird-filenames.sh +++ b/t/t4135-apply-weird-filenames.sh @@ -89,4 +89,21 @@ test_expect_success 'traditional, whitespace-damaged, colon in timezone' ' test_cmp expected "post image.txt" ' +cat >diff-from-svn <<\EOF +Index: Makefile +=================================================================== +diff --git a/branches/Makefile +deleted file mode 100644 +--- a/branches/Makefile (revision 13) ++++ /dev/null (nonexistent) +@@ +1 0,0 @@ +- +EOF + +test_expect_success 'apply handles a diff generated by Subversion' ' + >Makefile && + git apply -p2 diff-from-svn && + test_path_is_missing Makefile +' + test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 73b67b4280..1eccfb71d0 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -662,6 +662,11 @@ test_expect_success 'am pauses on conflict' ' test -d .git/rebase-apply ' +test_expect_success 'am --show-current-patch' ' + git am --show-current-patch >actual.patch && + test_cmp .git/rebase-apply/0001 actual.patch +' + test_expect_success 'am --skip works' ' echo goodbye >expected && git am --skip && @@ -1045,4 +1050,16 @@ test_expect_success 'am works with multi-line in-body headers' ' git cat-file commit HEAD | grep "^$LONG$" ' +test_expect_success 'am --quit keeps HEAD where it is' ' + mkdir .git/rebase-apply && + >.git/rebase-apply/last && + >.git/rebase-apply/next && + git rev-parse HEAD^ >.git/ORIG_HEAD && + git rev-parse HEAD >expected && + git am --quit && + test_path_is_missing .git/rebase-apply && + git rev-parse HEAD >actual && + test_cmp expected actual +' + test_done diff --git a/t/t4151-am-abort.sh b/t/t4151-am-abort.sh index 9473c2779e..16432781d2 100755 --- a/t/t4151-am-abort.sh +++ b/t/t4151-am-abort.sh @@ -46,9 +46,8 @@ do test_expect_success "am$with3 --skip continue after failed am$with3" ' test_must_fail git am$with3 --skip >output && - test_i18ngrep "^Applying" output >output.applying && - test_i18ngrep "^Applying: 6$" output.applying && - test_i18ncmp file-2-expect file-2 && + test_i18ngrep "^Applying: 6$" output && + test_cmp file-2-expect file-2 && test ! -f .git/MERGE_RR ' diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index c2fc584dac..d695a6082e 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -262,4 +262,9 @@ EOF grep "^warning:.* expected .tagger. line" err ' +test_expect_success 'index-pack --fsck-objects also warns upon missing tagger in tag' ' + git index-pack --fsck-objects tag-test-${pack1}.pack 2>err && + grep "^warning:.* expected .tagger. line" err +' + test_done diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 80a1a3239a..0680dec808 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -482,24 +482,24 @@ test_expect_success 'set up tests of missing reference' ' test_expect_success 'test lonely missing ref' ' ( cd client && - test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy - ) >/dev/null 2>error-m && + test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy 2>../error-m + ) && test_i18ncmp expect-error error-m ' test_expect_success 'test missing ref after existing' ' ( cd client && - test_must_fail git fetch-pack --no-progress .. refs/heads/A refs/heads/xyzzy - ) >/dev/null 2>error-em && + test_must_fail git fetch-pack --no-progress .. refs/heads/A refs/heads/xyzzy 2>../error-em + ) && test_i18ncmp expect-error error-em ' test_expect_success 'test missing ref before existing' ' ( cd client && - test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy refs/heads/A - ) >/dev/null 2>error-me && + test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy refs/heads/A 2>../error-me + ) && test_i18ncmp expect-error error-me ' @@ -755,4 +755,67 @@ test_expect_success 'fetching deepen' ' ) ' +test_expect_success 'filtering by size' ' + rm -rf server client && + test_create_repo server && + test_commit -C server one && + test_config -C server uploadpack.allowfilter 1 && + + test_create_repo client && + git -C client fetch-pack --filter=blob:limit=0 ../server HEAD && + + # Ensure that object is not inadvertently fetched + test_must_fail git -C client cat-file -e $(git hash-object server/one.t) +' + +test_expect_success 'filtering by size has no effect if support for it is not advertised' ' + rm -rf server client && + test_create_repo server && + test_commit -C server one && + + test_create_repo client && + git -C client fetch-pack --filter=blob:limit=0 ../server HEAD 2> err && + + # Ensure that object is fetched + git -C client cat-file -e $(git hash-object server/one.t) && + + test_i18ngrep "filtering not recognized by server" err +' + +fetch_filter_blob_limit_zero () { + SERVER="$1" + URL="$2" + + rm -rf "$SERVER" client && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" one && + test_config -C "$SERVER" uploadpack.allowfilter 1 && + + git clone "$URL" client && + test_config -C client extensions.partialclone origin && + + test_commit -C "$SERVER" two && + + git -C client fetch --filter=blob:limit=0 origin HEAD:somewhere && + + # Ensure that commit is fetched, but blob is not + test_config -C client extensions.partialclone "arbitrary string" && + git -C client cat-file -e $(git -C "$SERVER" rev-parse two) && + test_must_fail git -C client cat-file -e $(git hash-object "$SERVER/two.t") +} + +test_expect_success 'fetch with --filter=blob:limit=0' ' + fetch_filter_blob_limit_zero server server +' + +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'fetch with --filter=blob:limit=0 and HTTP' ' + fetch_filter_blob_limit_zero "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" +' + +stop_httpd + + test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 3debc87d4a..da9ac00557 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -540,82 +540,232 @@ test_expect_success "should be able to fetch with duplicate refspecs" ' set_config_tristate () { # var=$1 val=$2 case "$2" in - unset) test_unconfig "$1" ;; - *) git config "$1" "$2" ;; + unset) + test_unconfig "$1" + ;; + *) + git config "$1" "$2" + key=$(echo $1 | sed -e 's/^remote\.origin/fetch/') + git_fetch_c="$git_fetch_c -c $key=$2" + ;; esac } test_configured_prune () { - fetch_prune=$1 remote_origin_prune=$2 cmdline=$3 expected=$4 + test_configured_prune_type "$@" "name" + test_configured_prune_type "$@" "link" +} - test_expect_success "prune fetch.prune=$1 remote.origin.prune=$2${3:+ $3}; $4" ' +test_configured_prune_type () { + fetch_prune=$1 + remote_origin_prune=$2 + fetch_prune_tags=$3 + remote_origin_prune_tags=$4 + expected_branch=$5 + expected_tag=$6 + cmdline=$7 + mode=$8 + + if test -z "$cmdline_setup" + then + test_expect_success 'setup cmdline_setup variable for subsequent test' ' + remote_url="file://$(git -C one config remote.origin.url)" && + remote_fetch="$(git -C one config remote.origin.fetch)" && + cmdline_setup="\"$remote_url\" \"$remote_fetch\"" + ' + fi + + if test "$mode" = 'link' + then + new_cmdline="" + + if test "$cmdline" = "" + then + new_cmdline=$cmdline_setup + else + new_cmdline=$(printf "%s" "$cmdline" | perl -pe 's[origin(?!/)]["'"$remote_url"'"]g') + fi + + if test "$fetch_prune_tags" = 'true' || + test "$remote_origin_prune_tags" = 'true' + then + if ! printf '%s' "$cmdline\n" | grep -q refs/remotes/origin/ + then + new_cmdline="$new_cmdline refs/tags/*:refs/tags/*" + fi + fi + + cmdline="$new_cmdline" + fi + + test_expect_success "$mode prune fetch.prune=$1 remote.origin.prune=$2 fetch.pruneTags=$3 remote.origin.pruneTags=$4${7:+ $7}; branch:$5 tag:$6" ' # make sure a newbranch is there in . and also in one git branch -f newbranch && + git tag -f newtag && ( cd one && test_unconfig fetch.prune && + test_unconfig fetch.pruneTags && test_unconfig remote.origin.prune && - git fetch && - git rev-parse --verify refs/remotes/origin/newbranch + test_unconfig remote.origin.pruneTags && + git fetch '"$cmdline_setup"' && + git rev-parse --verify refs/remotes/origin/newbranch && + git rev-parse --verify refs/tags/newtag ) && # now remove it git branch -d newbranch && + git tag -d newtag && # then test ( cd one && + git_fetch_c="" && set_config_tristate fetch.prune $fetch_prune && + set_config_tristate fetch.pruneTags $fetch_prune_tags && set_config_tristate remote.origin.prune $remote_origin_prune && - - git fetch $cmdline && - case "$expected" in + set_config_tristate remote.origin.pruneTags $remote_origin_prune_tags && + + if test "$mode" != "link" + then + git_fetch_c="" + fi && + git$git_fetch_c fetch '"$cmdline"' && + case "$expected_branch" in pruned) test_must_fail git rev-parse --verify refs/remotes/origin/newbranch ;; kept) git rev-parse --verify refs/remotes/origin/newbranch ;; + esac && + case "$expected_tag" in + pruned) + test_must_fail git rev-parse --verify refs/tags/newtag + ;; + kept) + git rev-parse --verify refs/tags/newtag + ;; esac ) ' } -test_configured_prune unset unset "" kept -test_configured_prune unset unset "--no-prune" kept -test_configured_prune unset unset "--prune" pruned - -test_configured_prune false unset "" kept -test_configured_prune false unset "--no-prune" kept -test_configured_prune false unset "--prune" pruned - -test_configured_prune true unset "" pruned -test_configured_prune true unset "--prune" pruned -test_configured_prune true unset "--no-prune" kept - -test_configured_prune unset false "" kept -test_configured_prune unset false "--no-prune" kept -test_configured_prune unset false "--prune" pruned - -test_configured_prune false false "" kept -test_configured_prune false false "--no-prune" kept -test_configured_prune false false "--prune" pruned - -test_configured_prune true false "" kept -test_configured_prune true false "--prune" pruned -test_configured_prune true false "--no-prune" kept - -test_configured_prune unset true "" pruned -test_configured_prune unset true "--no-prune" kept -test_configured_prune unset true "--prune" pruned - -test_configured_prune false true "" pruned -test_configured_prune false true "--no-prune" kept -test_configured_prune false true "--prune" pruned - -test_configured_prune true true "" pruned -test_configured_prune true true "--prune" pruned -test_configured_prune true true "--no-prune" kept +# $1 config: fetch.prune +# $2 config: remote.<name>.prune +# $3 config: fetch.pruneTags +# $4 config: remote.<name>.pruneTags +# $5 expect: branch to be pruned? +# $6 expect: tag to be pruned? +# $7 git-fetch $cmdline: +# +# $1 $2 $3 $4 $5 $6 $7 +test_configured_prune unset unset unset unset kept kept "" +test_configured_prune unset unset unset unset kept kept "--no-prune" +test_configured_prune unset unset unset unset pruned kept "--prune" +test_configured_prune unset unset unset unset kept pruned \ + "--prune origin refs/tags/*:refs/tags/*" +test_configured_prune unset unset unset unset pruned pruned \ + "--prune origin refs/tags/*:refs/tags/* +refs/heads/*:refs/remotes/origin/*" + +test_configured_prune false unset unset unset kept kept "" +test_configured_prune false unset unset unset kept kept "--no-prune" +test_configured_prune false unset unset unset pruned kept "--prune" + +test_configured_prune true unset unset unset pruned kept "" +test_configured_prune true unset unset unset pruned kept "--prune" +test_configured_prune true unset unset unset kept kept "--no-prune" + +test_configured_prune unset false unset unset kept kept "" +test_configured_prune unset false unset unset kept kept "--no-prune" +test_configured_prune unset false unset unset pruned kept "--prune" + +test_configured_prune false false unset unset kept kept "" +test_configured_prune false false unset unset kept kept "--no-prune" +test_configured_prune false false unset unset pruned kept "--prune" +test_configured_prune false false unset unset kept pruned \ + "--prune origin refs/tags/*:refs/tags/*" +test_configured_prune false false unset unset pruned pruned \ + "--prune origin refs/tags/*:refs/tags/* +refs/heads/*:refs/remotes/origin/*" + +test_configured_prune true false unset unset kept kept "" +test_configured_prune true false unset unset pruned kept "--prune" +test_configured_prune true false unset unset kept kept "--no-prune" + +test_configured_prune unset true unset unset pruned kept "" +test_configured_prune unset true unset unset kept kept "--no-prune" +test_configured_prune unset true unset unset pruned kept "--prune" + +test_configured_prune false true unset unset pruned kept "" +test_configured_prune false true unset unset kept kept "--no-prune" +test_configured_prune false true unset unset pruned kept "--prune" + +test_configured_prune true true unset unset pruned kept "" +test_configured_prune true true unset unset pruned kept "--prune" +test_configured_prune true true unset unset kept kept "--no-prune" +test_configured_prune true true unset unset kept pruned \ + "--prune origin refs/tags/*:refs/tags/*" +test_configured_prune true true unset unset pruned pruned \ + "--prune origin refs/tags/*:refs/tags/* +refs/heads/*:refs/remotes/origin/*" + +# --prune-tags on its own does nothing, needs --prune as well, same +# for for fetch.pruneTags without fetch.prune +test_configured_prune unset unset unset unset kept kept "--prune-tags" +test_configured_prune unset unset true unset kept kept "" +test_configured_prune unset unset unset true kept kept "" + +# These will prune the tags +test_configured_prune unset unset unset unset pruned pruned "--prune --prune-tags" +test_configured_prune true unset true unset pruned pruned "" +test_configured_prune unset true unset true pruned pruned "" + +# remote.<name>.pruneTags overrides fetch.pruneTags, just like +# remote.<name>.prune overrides fetch.prune if set. +test_configured_prune true unset true unset pruned pruned "" +test_configured_prune false true false true pruned pruned "" +test_configured_prune true false true false kept kept "" + +# When --prune-tags is supplied it's ignored if an explicit refspec is +# given, same for the configuration options. +test_configured_prune unset unset unset unset pruned kept \ + "--prune --prune-tags origin +refs/heads/*:refs/remotes/origin/*" +test_configured_prune unset unset true unset pruned kept \ + "--prune origin +refs/heads/*:refs/remotes/origin/*" +test_configured_prune unset unset unset true pruned kept \ + "--prune origin +refs/heads/*:refs/remotes/origin/*" + +# Pruning that also takes place if a file:// url replaces a named +# remote. However, because there's no implicit +# +refs/heads/*:refs/remotes/origin/* refspec and supplying it on the +# command-line negates --prune-tags, the branches will not be pruned. +test_configured_prune_type unset unset unset unset kept kept "origin --prune-tags" "name" +test_configured_prune_type unset unset unset unset kept kept "origin --prune-tags" "link" +test_configured_prune_type unset unset unset unset pruned pruned "origin --prune --prune-tags" "name" +test_configured_prune_type unset unset unset unset kept pruned "origin --prune --prune-tags" "link" +test_configured_prune_type unset unset unset unset pruned pruned "--prune --prune-tags origin" "name" +test_configured_prune_type unset unset unset unset kept pruned "--prune --prune-tags origin" "link" +test_configured_prune_type unset unset true unset pruned pruned "--prune origin" "name" +test_configured_prune_type unset unset true unset kept pruned "--prune origin" "link" +test_configured_prune_type unset unset unset true pruned pruned "--prune origin" "name" +test_configured_prune_type unset unset unset true kept pruned "--prune origin" "link" +test_configured_prune_type true unset true unset pruned pruned "origin" "name" +test_configured_prune_type true unset true unset kept pruned "origin" "link" +test_configured_prune_type unset true true unset pruned pruned "origin" "name" +test_configured_prune_type unset true true unset kept pruned "origin" "link" +test_configured_prune_type unset true unset true pruned pruned "origin" "name" +test_configured_prune_type unset true unset true kept pruned "origin" "link" + +# When all remote.origin.fetch settings are deleted a --prune +# --prune-tags still implicitly supplies refs/tags/*:refs/tags/* so +# tags, but not tracking branches, will be deleted. +test_expect_success 'remove remote.origin.fetch "one"' ' + ( + cd one && + git config --unset-all remote.origin.fetch + ) +' +test_configured_prune_type unset unset unset unset kept pruned "origin --prune --prune-tags" "name" +test_configured_prune_type unset unset unset unset kept pruned "origin --prune --prune-tags" "link" test_expect_success 'all boundary commits are excluded' ' test_commit base && diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index 74486c73b0..9cc4b569c0 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -85,7 +85,7 @@ test_expect_success "fetch --recurse-submodules -j2 has the same output behaviou add_upstream_commit && ( cd downstream && - GIT_TRACE=$(pwd)/../trace.out git fetch --recurse-submodules -j2 2>../actual.err + GIT_TRACE="$TRASH_DIRECTORY/trace.out" git fetch --recurse-submodules -j2 2>../actual.err ) && test_must_be_empty actual.out && test_i18ncmp expect.err actual.err && diff --git a/t/t5536-fetch-conflicts.sh b/t/t5536-fetch-conflicts.sh index 644736b8a3..91f28c2f78 100755 --- a/t/t5536-fetch-conflicts.sh +++ b/t/t5536-fetch-conflicts.sh @@ -18,14 +18,6 @@ setup_repository () { ) } -verify_stderr () { - cat >expected && - # We're not interested in the error - # "fatal: The remote end hung up unexpectedly": - test_i18ngrep -E '^(fatal|warning):' error | grep -v 'hung up' >actual | sort && - test_i18ncmp expected actual -} - test_expect_success 'setup' ' git commit --allow-empty -m "Initial" && git branch branch1 && @@ -48,9 +40,7 @@ test_expect_success 'fetch conflict: config vs. config' ' "+refs/heads/branch2:refs/remotes/origin/branch1" && ( cd ccc && test_must_fail git fetch origin 2>error && - verify_stderr <<-\EOF - fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1 - EOF + test_i18ngrep "fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1" error ) ' @@ -77,9 +67,7 @@ test_expect_success 'fetch conflict: arg vs. arg' ' test_must_fail git fetch origin \ refs/heads/*:refs/remotes/origin/* \ refs/heads/branch2:refs/remotes/origin/branch1 2>error && - verify_stderr <<-\EOF - fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1 - EOF + test_i18ngrep "fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1" error ) ' @@ -90,10 +78,8 @@ test_expect_success 'fetch conflict: criss-cross args' ' git fetch origin \ refs/heads/branch1:refs/remotes/origin/branch2 \ refs/heads/branch2:refs/remotes/origin/branch1 2>error && - verify_stderr <<-\EOF - warning: refs/remotes/origin/branch1 usually tracks refs/heads/branch1, not refs/heads/branch2 - warning: refs/remotes/origin/branch2 usually tracks refs/heads/branch2, not refs/heads/branch1 - EOF + test_i18ngrep "warning: refs/remotes/origin/branch1 usually tracks refs/heads/branch1, not refs/heads/branch2" error && + test_i18ngrep "warning: refs/remotes/origin/branch2 usually tracks refs/heads/branch2, not refs/heads/branch1" error ) ' diff --git a/t/t5545-push-options.sh b/t/t5545-push-options.sh index 463783789c..b47a95871c 100755 --- a/t/t5545-push-options.sh +++ b/t/t5545-push-options.sh @@ -217,17 +217,32 @@ test_expect_success 'invalid push option in config' ' test_refs master HEAD@{1} ' +test_expect_success 'push options keep quoted characters intact (direct)' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + test_commit -C workbench one && + git -C workbench push --push-option="\"embedded quotes\"" up master && + echo "\"embedded quotes\"" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd -test_expect_success 'push option denied properly by http server' ' +# set up http repository for fetching/pushing, with push options config +# bool set to $1 +mk_http_pair () { test_when_finished "rm -rf test_http_clone" && - test_when_finished "rm -rf \"$HTTPD_DOCUMENT_ROOT_PATH\"/upstream.git" && + test_when_finished 'rm -rf "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git' && mk_repo_pair && - git -C upstream config receive.advertisePushOptions false && + git -C upstream config receive.advertisePushOptions "$1" && git -C upstream config http.receivepack true && cp -R upstream/.git "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git && - git clone "$HTTPD_URL"/smart/upstream test_http_clone && + git clone "$HTTPD_URL"/smart/upstream test_http_clone +} + +test_expect_success 'push option denied properly by http server' ' + mk_http_pair false && test_commit -C test_http_clone one && test_must_fail git -C test_http_clone push --push-option=asdf origin master 2>actual && test_i18ngrep "the receiving end does not support push options" actual && @@ -235,13 +250,7 @@ test_expect_success 'push option denied properly by http server' ' ' test_expect_success 'push options work properly across http' ' - test_when_finished "rm -rf test_http_clone" && - test_when_finished "rm -rf \"$HTTPD_DOCUMENT_ROOT_PATH\"/upstream.git" && - mk_repo_pair && - git -C upstream config receive.advertisePushOptions true && - git -C upstream config http.receivepack true && - cp -R upstream/.git "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git && - git clone "$HTTPD_URL"/smart/upstream test_http_clone && + mk_http_pair true && test_commit -C test_http_clone one && git -C test_http_clone push origin master && @@ -260,6 +269,15 @@ test_expect_success 'push options work properly across http' ' test_cmp expect actual ' +test_expect_success 'push options keep quoted characters intact (http)' ' + mk_http_pair true && + + test_commit -C test_http_clone one && + git -C test_http_clone push --push-option="\"embedded quotes\"" origin master && + echo "\"embedded quotes\"" >expect && + test_cmp expect "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git/hooks/pre-receive.push_options +' + stop_httpd test_done diff --git a/t/t5570-git-daemon.sh b/t/t5570-git-daemon.sh index 755b05a8ae..0d4c52016b 100755 --- a/t/t5570-git-daemon.sh +++ b/t/t5570-git-daemon.sh @@ -50,7 +50,7 @@ test_expect_success 'no-op fetch -v stderr is as expected' ' ' test_expect_success 'no-op fetch without "-v" is quiet' ' - (cd clone && git fetch) 2>stderr && + (cd clone && git fetch 2>../stderr) && ! test -s stderr ' diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 8c437bf872..0b62037744 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -628,4 +628,105 @@ test_expect_success 'clone on case-insensitive fs' ' ) ' +partial_clone () { + SERVER="$1" && + URL="$2" && + + rm -rf "$SERVER" client && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" one && + HASH1=$(git hash-object "$SERVER/one.t") && + git -C "$SERVER" revert HEAD && + test_commit -C "$SERVER" two && + HASH2=$(git hash-object "$SERVER/two.t") && + test_config -C "$SERVER" uploadpack.allowfilter 1 && + test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 && + + git clone --filter=blob:limit=0 "$URL" client && + + git -C client fsck && + + # Ensure that unneeded blobs are not inadvertently fetched. + test_config -C client extensions.partialclone "not a remote" && + test_must_fail git -C client cat-file -e "$HASH1" && + + # But this blob was fetched, because clone performs an initial checkout + git -C client cat-file -e "$HASH2" +} + +test_expect_success 'partial clone' ' + partial_clone server "file://$(pwd)/server" +' + +test_expect_success 'partial clone: warn if server does not support object filtering' ' + rm -rf server client && + test_create_repo server && + test_commit -C server one && + + git clone --filter=blob:limit=0 "file://$(pwd)/server" client 2> err && + + test_i18ngrep "filtering not recognized by server" err +' + +test_expect_success 'batch missing blob request during checkout' ' + rm -rf server client && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + + git -C server commit -m x && + echo aa >server/a && + echo bb >server/b && + git -C server add a b && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + + git clone --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure that there is only one negotiation by checking that there is + # only "done" line sent. ("done" marks the end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client checkout HEAD^ && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_expect_success 'batch missing blob request does not inadvertently try to fetch gitlinks' ' + rm -rf server client && + + test_create_repo repo_for_submodule && + test_commit -C repo_for_submodule x && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + git -C server commit -m x && + + echo aa >server/a && + echo bb >server/b && + # Also add a gitlink pointing to an arbitrary repository + git -C server submodule add "$(pwd)/repo_for_submodule" c && + git -C server add a b c && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + + # Make sure that it succeeds + git clone --filter=blob:limit=0 "file://$(pwd)/server" client +' + +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'partial clone using HTTP' ' + partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" +' + +stop_httpd + test_done diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh new file mode 100755 index 0000000000..cee5565367 --- /dev/null +++ b/t/t5616-partial-clone.sh @@ -0,0 +1,157 @@ +#!/bin/sh + +test_description='git partial clone' + +. ./test-lib.sh + +# create a normal "src" repo where we can later create new commits. +# expect_1.oids will contain a list of the OIDs of all blobs. +test_expect_success 'setup normal src repo' ' + echo "{print \$1}" >print_1.awk && + echo "{print \$2}" >print_2.awk && + + git init src && + for n in 1 2 3 4 + do + echo "This is file: $n" > src/file.$n.txt + git -C src add file.$n.txt + git -C src commit -m "file $n" + git -C src ls-files -s file.$n.txt >>temp + done && + awk -f print_2.awk <temp | sort >expect_1.oids && + test_line_count = 4 expect_1.oids +' + +# bare clone "src" giving "srv.bare" for use as our server. +test_expect_success 'setup bare clone for server' ' + git clone --bare "file://$(pwd)/src" srv.bare && + git -C srv.bare config --local uploadpack.allowfilter 1 && + git -C srv.bare config --local uploadpack.allowanysha1inwant 1 +' + +# do basic partial clone from "srv.bare" +# confirm we are missing all of the known blobs. +# confirm partial clone was registered in the local config. +test_expect_success 'do partial clone 1' ' + git clone --no-checkout --filter=blob:none "file://$(pwd)/srv.bare" pc1 && + git -C pc1 rev-list HEAD --quiet --objects --missing=print \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed.oids && + test_cmp expect_1.oids observed.oids && + test "$(git -C pc1 config --local core.repositoryformatversion)" = "1" && + test "$(git -C pc1 config --local extensions.partialclone)" = "origin" && + test "$(git -C pc1 config --local core.partialclonefilter)" = "blob:none" +' + +# checkout master to force dynamic object fetch of blobs at HEAD. +test_expect_success 'verify checkout with dynamic object fetch' ' + git -C pc1 rev-list HEAD --quiet --objects --missing=print >observed && + test_line_count = 4 observed && + git -C pc1 checkout master && + git -C pc1 rev-list HEAD --quiet --objects --missing=print >observed && + test_line_count = 0 observed +' + +# create new commits in "src" repo to establish a blame history on file.1.txt +# and push to "srv.bare". +test_expect_success 'push new commits to server' ' + git -C src remote add srv "file://$(pwd)/srv.bare" && + for x in a b c d e + do + echo "Mod file.1.txt $x" >>src/file.1.txt + git -C src add file.1.txt + git -C src commit -m "mod $x" + done && + git -C src blame master -- file.1.txt >expect.blame && + git -C src push -u srv master +' + +# (partial) fetch in the partial clone repo from the promisor remote. +# verify that fetch inherited the filter-spec from the config and DOES NOT +# have the new blobs. +test_expect_success 'partial fetch inherits filter settings' ' + git -C pc1 fetch origin && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 5 observed +' + +# force dynamic object fetch using diff. +# we should only get 1 new blob (for the file in origin/master). +test_expect_success 'verify diff causes dynamic object fetch' ' + git -C pc1 diff master..origin/master -- file.1.txt && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 4 observed +' + +# force full dynamic object fetch of the file's history using blame. +# we should get the intermediate blobs for the file. +test_expect_success 'verify blame causes dynamic object fetch' ' + git -C pc1 blame origin/master -- file.1.txt >observed.blame && + test_cmp expect.blame observed.blame && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 0 observed +' + +# create new commits in "src" repo to establish a history on file.2.txt +# and push to "srv.bare". +test_expect_success 'push new commits to server for file.2.txt' ' + for x in a b c d e f + do + echo "Mod file.2.txt $x" >>src/file.2.txt + git -C src add file.2.txt + git -C src commit -m "mod $x" + done && + git -C src push -u srv master +' + +# Do FULL fetch by disabling inherited filter-spec using --no-filter. +# Verify we have all the new blobs. +test_expect_success 'override inherited filter-spec using --no-filter' ' + git -C pc1 fetch --no-filter origin && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 0 observed +' + +# create new commits in "src" repo to establish a history on file.3.txt +# and push to "srv.bare". +test_expect_success 'push new commits to server for file.3.txt' ' + for x in a b c d e f + do + echo "Mod file.3.txt $x" >>src/file.3.txt + git -C src add file.3.txt + git -C src commit -m "mod $x" + done && + git -C src push -u srv master +' + +# Do a partial fetch and then try to manually fetch the missing objects. +# This can be used as the basis of a pre-command hook to bulk fetch objects +# perhaps combined with a command in dry-run mode. +test_expect_success 'manual prefetch of missing objects' ' + git -C pc1 fetch --filter=blob:none origin && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed.oids && + test_line_count = 6 observed.oids && + git -C pc1 fetch-pack --stdin "file://$(pwd)/srv.bare" <observed.oids && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed.oids && + test_line_count = 0 observed.oids +' + +test_expect_success 'partial clone with transfer.fsckobjects=1 uses index-pack --fsck-objects' ' + git init src && + test_commit -C src x && + test_config -C src uploadpack.allowfilter 1 && + test_config -C src uploadpack.allowanysha1inwant 1 && + + GIT_TRACE="$(pwd)/trace" git -c transfer.fsckobjects=1 \ + clone --filter="blob:none" "file://$(pwd)/src" dst && + grep "git index-pack.*--fsck-objects" trace +' + +test_done diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index 8f17fd9da8..716283b274 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -147,6 +147,48 @@ test_expect_success 'status -s -b (diverged from upstream)' ' ' cat >expect <<\EOF +## b1...origin/master [different] +EOF + +test_expect_success 'status -s -b --no-ahead-behind (diverged from upstream)' ' + ( + cd test && + git checkout b1 >/dev/null && + git status -s -b --no-ahead-behind | head -1 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF +On branch b1 +Your branch and 'origin/master' have diverged, +and have 1 and 1 different commits each, respectively. +EOF + +test_expect_success 'status --long --branch' ' + ( + cd test && + git checkout b1 >/dev/null && + git status --long -b | head -3 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF +On branch b1 +Your branch and 'origin/master' refer to different commits. +EOF + +test_expect_success 'status --long --branch --no-ahead-behind' ' + ( + cd test && + git checkout b1 >/dev/null && + git status --long -b --no-ahead-behind | head -2 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF ## b5...brokenbase [gone] EOF diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index a5d9015024..bae78c4e89 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -378,4 +378,12 @@ check_describe tags/A --all A check_describe tags/c --all c check_describe heads/branch_A --all --match='branch_*' branch_A +test_expect_success 'describe complains about tree object' ' + test_must_fail git describe HEAD^{tree} +' + +test_expect_success 'describe complains about missing object' ' + test_must_fail git describe $_z40 +' + test_done diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 2e2fb0e957..a54a52aaa4 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -512,7 +512,7 @@ test_expect_success 'merge-msg with "merging" an annotated tag' ' test_when_finished "git reset --hard" && annote=$(git rev-parse annote) && - git merge --no-commit $annote && + git merge --no-commit --no-ff $annote && { cat <<-EOF Merge tag '\''$annote'\'' diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index c128dfc579..295d1475bd 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -373,11 +373,8 @@ test_expect_success 'Quoting style: tcl' ' for i in "--perl --shell" "-s --python" "--python --tcl" "--tcl --perl"; do test_expect_success "more than one quoting style: $i" " - git for-each-ref $i 2>&1 | (read line && - case \$line in - \"error: more than one quoting style\"*) : happy;; - *) false - esac) + test_must_fail git for-each-ref $i 2>err && + grep '^error: more than one quoting style' err " done diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index a9af2de996..2aac77af70 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -452,6 +452,21 @@ test_expect_success \ test_cmp expect actual ' +get_tag_header annotated-tag-edit $commit commit $time >expect +echo "An edited message" >>expect +test_expect_success 'set up editor' ' + write_script fakeeditor <<-\EOF + sed -e "s/A message/An edited message/g" <"$1" >"$1-" + mv "$1-" "$1" + EOF +' +test_expect_success \ + 'creating an annotated tag with -m message --edit should succeed' ' + GIT_EDITOR=./fakeeditor git tag -m "A message" --edit annotated-tag-edit && + get_tag_msg annotated-tag-edit >actual && + test_cmp expect actual +' + cat >msgfile <<EOF Another message in a file. @@ -465,6 +480,21 @@ test_expect_success \ test_cmp expect actual ' +get_tag_header file-annotated-tag-edit $commit commit $time >expect +sed -e "s/Another message/Another edited message/g" msgfile >>expect +test_expect_success 'set up editor' ' + write_script fakeeditor <<-\EOF + sed -e "s/Another message/Another edited message/g" <"$1" >"$1-" + mv "$1-" "$1" + EOF +' +test_expect_success \ + 'creating an annotated tag with -F messagefile --edit should succeed' ' + GIT_EDITOR=./fakeeditor git tag -F msgfile --edit file-annotated-tag-edit && + get_tag_msg file-annotated-tag-edit >actual && + test_cmp expect actual +' + cat >inputmsg <<EOF A message from the standard input diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index f5f46a95b4..7541ba5edb 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -110,13 +110,6 @@ test_expect_success TTY 'configuration can disable pager' ' ! test -e paginated.out ' -test_expect_success TTY 'git config uses a pager if configured to' ' - rm -f paginated.out && - test_config pager.config true && - test_terminal git config --list && - test -e paginated.out -' - test_expect_success TTY 'configuration can enable pager (from subdir)' ' rm -f paginated.out && mkdir -p subdir && @@ -252,6 +245,48 @@ test_expect_success TTY 'git branch --set-upstream-to ignores pager.branch' ' ! test -e paginated.out ' +test_expect_success TTY 'git config ignores pager.config when setting' ' + rm -f paginated.out && + test_terminal git -c pager.config config foo.bar bar && + ! test -e paginated.out +' + +test_expect_success TTY 'git config --edit ignores pager.config' ' + rm -f paginated.out editor.used && + write_script editor <<-\EOF && + touch editor.used + EOF + EDITOR=./editor test_terminal git -c pager.config config --edit && + ! test -e paginated.out && + test -e editor.used +' + +test_expect_success TTY 'git config --get ignores pager.config' ' + rm -f paginated.out && + test_terminal git -c pager.config config --get foo.bar && + ! test -e paginated.out +' + +test_expect_success TTY 'git config --get-urlmatch defaults to paging' ' + rm -f paginated.out && + test_terminal git -c http."https://foo.com/".bar=foo \ + config --get-urlmatch http https://foo.com && + test -e paginated.out +' + +test_expect_success TTY 'git config --get-all respects pager.config' ' + rm -f paginated.out && + test_terminal git -c pager.config=false config --get-all foo.bar && + ! test -e paginated.out +' + +test_expect_success TTY 'git config --list defaults to paging' ' + rm -f paginated.out && + test_terminal git config --list && + test -e paginated.out +' + + # A colored commit log will begin with an appropriate ANSI escape # for the first color; the text "commit" comes later. colorful() { diff --git a/t/t7063-status-untracked-cache.sh b/t/t7063-status-untracked-cache.sh index e5fb892f95..c61e304e97 100755 --- a/t/t7063-status-untracked-cache.sh +++ b/t/t7063-status-untracked-cache.sh @@ -14,6 +14,9 @@ test_description='test untracked cache' # See <20160803174522.5571-1-pclouds@gmail.com> if you want to know # more. +GIT_FORCE_UNTRACKED_CACHE=true +export GIT_FORCE_UNTRACKED_CACHE + sync_mtime () { find . -type d -ls >/dev/null } @@ -22,6 +25,12 @@ avoid_racy() { sleep 1 } +status_is_clean() { + >../status.expect && + git status --porcelain >../status.actual && + test_cmp ../status.expect ../status.actual +} + test_lazy_prereq UNTRACKED_CACHE ' { git update-index --test-untracked-cache; ret=$?; } && test $ret -ne 1 @@ -683,4 +692,85 @@ test_expect_success 'untracked cache survives a commit' ' test_cmp ../before ../after ' +test_expect_success 'teardown worktree' ' + cd .. +' + +test_expect_success SYMLINKS 'setup worktree for symlink test' ' + git init worktree-symlink && + cd worktree-symlink && + git config core.untrackedCache true && + mkdir one two && + touch one/file two/file && + git add one/file two/file && + git commit -m"first commit" && + git rm -rf one && + ln -s two one && + git add one && + git commit -m"second commit" +' + +test_expect_success SYMLINKS '"status" after symlink replacement should be clean with UC=true' ' + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + status_is_clean +' + +test_expect_success SYMLINKS '"status" after symlink replacement should be clean with UC=false' ' + git config core.untrackedCache false && + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + status_is_clean +' + +test_expect_success 'setup worktree for non-symlink test' ' + git init worktree-non-symlink && + cd worktree-non-symlink && + git config core.untrackedCache true && + mkdir one two && + touch one/file two/file && + git add one/file two/file && + git commit -m"first commit" && + git rm -rf one && + cp two/file one && + git add one && + git commit -m"second commit" +' + +test_expect_success '"status" after file replacement should be clean with UC=true' ' + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + test-dump-untracked-cache >../actual && + grep -F "recurse valid" ../actual >../actual.grep && + cat >../expect.grep <<EOF && +/ 0000000000000000000000000000000000000000 recurse valid +/two/ 0000000000000000000000000000000000000000 recurse valid +EOF + status_is_clean && + test_cmp ../expect.grep ../actual.grep +' + +test_expect_success '"status" after file replacement should be clean with UC=false' ' + git config core.untrackedCache false && + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + status_is_clean +' + test_done diff --git a/t/t7064-wtstatus-pv2.sh b/t/t7064-wtstatus-pv2.sh index e319fa2e84..8f795327a0 100755 --- a/t/t7064-wtstatus-pv2.sh +++ b/t/t7064-wtstatus-pv2.sh @@ -390,6 +390,68 @@ test_expect_success 'verify upstream fields in branch header' ' ) ' +test_expect_success 'verify --[no-]ahead-behind with V2 format' ' + git checkout master && + test_when_finished "rm -rf sub_repo" && + git clone . sub_repo && + ( + ## Confirm local master tracks remote master. + cd sub_repo && + HUF=$(git rev-parse HEAD) && + + # Confirm --no-ahead-behind reports traditional branch.ab with 0/0 for equal branches. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + EOF + + git status --no-ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm --ahead-behind reports traditional branch.ab with 0/0. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + EOF + + git status --ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + ## Test non-equal ahead/behind. + echo xyz >file_xyz && + git add file_xyz && + git commit -m xyz && + + HUF=$(git rev-parse HEAD) && + + # Confirm --no-ahead-behind reports branch.ab with ?/? for non-equal branches. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +? -? + EOF + + git status --no-ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm --ahead-behind reports traditional branch.ab with 1/0. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +1 -0 + EOF + + git status --ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + test_expect_success 'create and add submodule, submodule appears clean (A. S...)' ' git checkout master && git clone . sub_repo && diff --git a/t/t7505-prepare-commit-msg-hook.sh b/t/t7505-prepare-commit-msg-hook.sh index b13f72975e..1f43b3cd4c 100755 --- a/t/t7505-prepare-commit-msg-hook.sh +++ b/t/t7505-prepare-commit-msg-hook.sh @@ -4,6 +4,38 @@ test_description='prepare-commit-msg hook' . ./test-lib.sh +test_expect_success 'set up commits for rebasing' ' + test_commit root && + test_commit a a a && + test_commit b b b && + git checkout -b rebase-me root && + test_commit rebase-a a aa && + test_commit rebase-b b bb && + for i in $(test_seq 1 13) + do + test_commit rebase-$i c $i + done && + git checkout master && + + cat >rebase-todo <<-EOF + pick $(git rev-parse rebase-a) + pick $(git rev-parse rebase-b) + fixup $(git rev-parse rebase-1) + fixup $(git rev-parse rebase-2) + pick $(git rev-parse rebase-3) + fixup $(git rev-parse rebase-4) + squash $(git rev-parse rebase-5) + reword $(git rev-parse rebase-6) + squash $(git rev-parse rebase-7) + fixup $(git rev-parse rebase-8) + fixup $(git rev-parse rebase-9) + edit $(git rev-parse rebase-10) + squash $(git rev-parse rebase-11) + squash $(git rev-parse rebase-12) + edit $(git rev-parse rebase-13) + EOF +' + test_expect_success 'with no hook' ' echo "foo" > file && @@ -31,17 +63,41 @@ mkdir -p "$HOOKDIR" echo "#!$SHELL_PATH" > "$HOOK" cat >> "$HOOK" <<'EOF' -if test "$2" = commit; then - source=$(git rev-parse "$3") +GIT_DIR=$(git rev-parse --git-dir) +if test -d "$GIT_DIR/rebase-merge" +then + rebasing=1 else - source=${2-default} + rebasing=0 fi -if test "$GIT_EDITOR" = :; then - sed -e "1s/.*/$source (no editor)/" "$1" > msg.tmp + +get_last_cmd () { + tail -n1 "$GIT_DIR/rebase-merge/done" | { + read cmd id _ + git log --pretty="[$cmd %s]" -n1 $id + } +} + +if test "$2" = commit +then + if test $rebasing = 1 + then + source="$3" + else + source=$(git rev-parse "$3") + fi else - sed -e "1s/.*/$source/" "$1" > msg.tmp + source=${2-default} +fi +test "$GIT_EDITOR" = : && source="$source (no editor)" + +if test $rebasing = 1 +then + echo "$source $(get_last_cmd)" >"$1" +else + sed -e "1s/.*/$source/" "$1" >msg.tmp + mv msg.tmp "$1" fi -mv msg.tmp "$1" exit 0 EOF chmod +x "$HOOK" @@ -156,6 +212,63 @@ test_expect_success 'with hook and editor (merge)' ' test "$(git log -1 --pretty=format:%s)" = "merge" ' +test_rebase () { + expect=$1 && + mode=$2 && + test_expect_$expect C_LOCALE_OUTPUT "with hook (rebase $mode)" ' + test_when_finished "\ + git rebase --abort + git checkout -f master + git branch -D tmp" && + git checkout -b tmp rebase-me && + GIT_SEQUENCE_EDITOR="cp rebase-todo" && + GIT_EDITOR="\"$FAKE_EDITOR\"" && + ( + export GIT_SEQUENCE_EDITOR GIT_EDITOR && + test_must_fail git rebase $mode b && + echo x >a && + git add a && + test_must_fail git rebase --continue && + echo x >b && + git add b && + git commit && + git rebase --continue && + echo y >a && + git add a && + git commit && + git rebase --continue && + echo y >b && + git add b && + git rebase --continue + ) && + if test $mode = -p # reword amended after pick + then + n=18 + else + n=17 + fi && + git log --pretty=%s -g -n$n HEAD@{1} >actual && + test_cmp "$TEST_DIRECTORY/t7505/expected-rebase$mode" actual + ' +} + +test_rebase success -i +test_rebase success -p + +test_expect_success 'with hook (cherry-pick)' ' + test_when_finished "git checkout -f master" && + git checkout -B other b && + git cherry-pick rebase-1 && + test "$(git log -1 --pretty=format:%s)" = "message (no editor)" +' + +test_expect_success 'with hook and editor (cherry-pick)' ' + test_when_finished "git checkout -f master" && + git checkout -B other b && + git cherry-pick -e rebase-1 && + test "$(git log -1 --pretty=format:%s)" = merge +' + cat > "$HOOK" <<'EOF' #!/bin/sh exit 1 @@ -197,4 +310,11 @@ test_expect_success 'with failing hook (merge)' ' ' +test_expect_success C_LOCALE_OUTPUT 'with failing hook (cherry-pick)' ' + test_when_finished "git checkout -f master" && + git checkout -B other b && + test_must_fail git cherry-pick rebase-1 2>actual && + test $(grep -c prepare-commit-msg actual) = 1 +' + test_done diff --git a/t/t7505/expected-rebase-i b/t/t7505/expected-rebase-i new file mode 100644 index 0000000000..c514bdbb94 --- /dev/null +++ b/t/t7505/expected-rebase-i @@ -0,0 +1,17 @@ +message [edit rebase-13] +message (no editor) [edit rebase-13] +message [squash rebase-12] +message (no editor) [squash rebase-11] +default [edit rebase-10] +message (no editor) [edit rebase-10] +message [fixup rebase-9] +message (no editor) [fixup rebase-8] +message (no editor) [squash rebase-7] +message [reword rebase-6] +message [squash rebase-5] +message (no editor) [fixup rebase-4] +message (no editor) [pick rebase-3] +message (no editor) [fixup rebase-2] +message (no editor) [fixup rebase-1] +merge [pick rebase-b] +message [pick rebase-a] diff --git a/t/t7505/expected-rebase-p b/t/t7505/expected-rebase-p new file mode 100644 index 0000000000..93bada596e --- /dev/null +++ b/t/t7505/expected-rebase-p @@ -0,0 +1,18 @@ +message [edit rebase-13] +message (no editor) [edit rebase-13] +message [squash rebase-12] +message (no editor) [squash rebase-11] +default [edit rebase-10] +message (no editor) [edit rebase-10] +message [fixup rebase-9] +message (no editor) [fixup rebase-8] +message (no editor) [squash rebase-7] +HEAD [reword rebase-6] +message (no editor) [reword rebase-6] +message [squash rebase-5] +message (no editor) [fixup rebase-4] +message (no editor) [pick rebase-3] +message (no editor) [fixup rebase-2] +message (no editor) [fixup rebase-1] +merge [pick rebase-b] +message [pick rebase-a] diff --git a/t/t7519-status-fsmonitor.sh b/t/t7519-status-fsmonitor.sh index eb2d13bbcf..756beb0d8e 100755 --- a/t/t7519-status-fsmonitor.sh +++ b/t/t7519-status-fsmonitor.sh @@ -314,4 +314,43 @@ test_expect_success 'splitting the index results in the same state' ' test_cmp expect actual ' +test_expect_success UNTRACKED_CACHE 'ignore .git changes when invalidating UNTR' ' + test_create_repo dot-git && + ( + cd dot-git && + mkdir -p .git/hooks && + : >tracked && + : >modified && + mkdir dir1 && + : >dir1/tracked && + : >dir1/modified && + mkdir dir2 && + : >dir2/tracked && + : >dir2/modified && + write_integration_script && + git config core.fsmonitor .git/hooks/fsmonitor-test && + git update-index --untracked-cache && + git update-index --fsmonitor && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace-before" \ + git status && + test-dump-untracked-cache >../before + ) && + cat >>dot-git/.git/hooks/fsmonitor-test <<-\EOF && + printf ".git\0" + printf ".git/index\0" + printf "dir1/.git\0" + printf "dir1/.git/index\0" + EOF + ( + cd dot-git && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace-after" \ + git status && + test-dump-untracked-cache >../after + ) && + grep "directory invalidation" trace-before >>before && + grep "directory invalidation" trace-after >>after && + # UNTR extension unchanged, dir invalidation count unchanged + test_cmp before after +' + test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index dfde6a675a..6736d8d131 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -700,6 +700,42 @@ test_expect_success 'merge --no-ff --edit' ' test_cmp expected actual ' +test_expect_success 'merge annotated/signed tag w/o tracking' ' + test_when_finished "rm -rf dst; git tag -d anno1" && + git tag -a -m "anno c1" anno1 c1 && + git init dst && + git rev-parse c1 >dst/expect && + ( + # c0 fast-forwards to c1 but because this repository + # is not a "downstream" whose refs/tags follows along + # tag from the "upstream", this pull defaults to --no-ff + cd dst && + git pull .. c0 && + git pull .. anno1 && + git rev-parse HEAD^2 >actual && + test_cmp expect actual + ) +' + +test_expect_success 'merge annotated/signed tag w/ tracking' ' + test_when_finished "rm -rf dst; git tag -d anno1" && + git tag -a -m "anno c1" anno1 c1 && + git init dst && + git rev-parse c1 >dst/expect && + ( + # c0 fast-forwards to c1 and because this repository + # is a "downstream" whose refs/tags follows along + # tag from the "upstream", this pull defaults to --ff + cd dst && + git remote add origin .. && + git pull origin c0 && + git fetch origin && + git merge anno1 && + git rev-parse HEAD >actual && + test_cmp expect actual + ) +' + test_expect_success GPG 'merge --ff-only tag' ' git reset --hard c0 && git commit --allow-empty -m "A newer commit" && @@ -718,7 +754,7 @@ test_expect_success GPG 'merge --no-edit tag should skip editor' ' git tag -f -s -m "A newer commit" signed && git reset --hard c0 && - EDITOR=false git merge --no-edit signed && + EDITOR=false git merge --no-edit --no-ff signed && git rev-parse signed^0 >expect && git rev-parse HEAD^2 >actual && test_cmp expect actual diff --git a/t/t7607-merge-overwrite.sh b/t/t7607-merge-overwrite.sh index 9444d6a9b9..9c422bcd7c 100755 --- a/t/t7607-merge-overwrite.sh +++ b/t/t7607-merge-overwrite.sh @@ -97,7 +97,10 @@ test_expect_failure 'will not overwrite unstaged changes in renamed file' ' git mv c1.c other.c && git commit -m rename && cp important other.c && - git merge c1a && + test_must_fail git merge c1a >out && + test_i18ngrep "Refusing to lose dirty file at other.c" out && + test_path_is_file other.c~HEAD && + test $(git hash-object other.c~HEAD) = $(git rev-parse c1a:c1.c) && test_cmp important other.c ' diff --git a/t/t9000-addresses.sh b/t/t9000-addresses.sh deleted file mode 100755 index a1ebef6de2..0000000000 --- a/t/t9000-addresses.sh +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -test_description='compare address parsing with and without Mail::Address' -. ./test-lib.sh - -if ! test_have_prereq PERL; then - skip_all='skipping perl interface tests, perl not available' - test_done -fi - -perl -MTest::More -e 0 2>/dev/null || { - skip_all="Perl Test::More unavailable, skipping test" - test_done -} - -perl -MMail::Address -e 0 2>/dev/null || { - skip_all="Perl Mail::Address unavailable, skipping test" - test_done -} - -test_external_has_tap=1 - -test_external_without_stderr \ - 'Perl address parsing function' \ - perl "$TEST_DIRECTORY"/t9000/test.pl - -test_done diff --git a/t/t9000/test.pl b/t/t9000/test.pl deleted file mode 100755 index dfeaa9c655..0000000000 --- a/t/t9000/test.pl +++ /dev/null @@ -1,67 +0,0 @@ -#!/usr/bin/perl -use lib (split(/:/, $ENV{GITPERLLIB})); - -use 5.008; -use warnings; -use strict; - -use Test::More qw(no_plan); -use Mail::Address; - -BEGIN { use_ok('Git') } - -my @success_list = (q[Jane], - q[jdoe@example.com], - q[<jdoe@example.com>], - q[Jane <jdoe@example.com>], - q[Jane Doe <jdoe@example.com>], - q["Jane" <jdoe@example.com>], - q["Doe, Jane" <jdoe@example.com>], - q["Jane@:;\>.,()<Doe" <jdoe@example.com>], - q[Jane!#$%&'*+-/=?^_{|}~Doe' <jdoe@example.com>], - q["<jdoe@example.com>"], - q["Jane jdoe@example.com"], - q[Jane Doe <jdoe @ example.com >], - q[Jane Doe < jdoe@example.com >], - q[Jane @ Doe @ Jane @ Doe], - q["Jane, 'Doe'" <jdoe@example.com>], - q['Doe, "Jane' <jdoe@example.com>], - q["Jane" "Do"e <jdoe@example.com>], - q["Jane' Doe" <jdoe@example.com>], - q["Jane Doe <jdoe@example.com>" <jdoe@example.com>], - q["Jane\" Doe" <jdoe@example.com>], - q[Doe, jane <jdoe@example.com>], - q["Jane Doe <jdoe@example.com>], - q['Jane 'Doe' <jdoe@example.com>], - q[Jane@:;\.,()<>Doe <jdoe@example.com>], - q[Jane <jdoe@example.com> Doe], - q[<jdoe@example.com> Jane Doe]); - -my @known_failure_list = (q[Jane\ Doe <jdoe@example.com>], - q["Doe, Ja"ne <jdoe@example.com>], - q["Doe, Katarina" Jane <jdoe@example.com>], - q[Jane jdoe@example.com], - q["Jane "Kat"a" ri"na" ",Doe" <jdoe@example.com>], - q[Jane Doe], - q[Jane "Doe <jdoe@example.com>"], - q[\"Jane Doe <jdoe@example.com>], - q[Jane\"\" Doe <jdoe@example.com>], - q['Jane "Katarina\" \' Doe' <jdoe@example.com>]); - -foreach my $str (@success_list) { - my @expected = map { $_->format } Mail::Address->parse("$str"); - my @actual = Git::parse_mailboxes("$str"); - is_deeply(\@expected, \@actual, qq[same output : $str]); -} - -TODO: { - local $TODO = "known breakage"; - foreach my $str (@known_failure_list) { - my @expected = map { $_->format } Mail::Address->parse("$str"); - my @actual = Git::parse_mailboxes("$str"); - is_deeply(\@expected, \@actual, qq[same output : $str]); - } -} - -my $is_passing = eval { Test::More->is_passing }; -exit($is_passing ? 0 : 1) unless $@ =~ /Can't locate object method/; diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 81869d8913..e80eacbb1b 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -178,6 +178,25 @@ test_expect_success $PREREQ 'cc trailer with various syntax' ' test_cmp expected-cc commandline1 ' +test_expect_success $PREREQ 'setup fake get_maintainer.pl script for cc trailer' " + write_script expected-cc-script.sh <<-EOF + echo 'One Person <one@example.com> (supporter:THIS (FOO/bar))' + echo 'Two Person <two@example.com> (maintainer:THIS THING)' + echo 'Third List <three@example.com> (moderated list:THIS THING (FOO/bar))' + echo '<four@example.com> (moderated list:FOR THING)' + echo 'five@example.com (open list:FOR THING (FOO/bar))' + echo 'six@example.com (open list)' + EOF +" + +test_expect_success $PREREQ 'cc trailer with get_maintainer.pl output' ' + clean_fake_sendmail && + git send-email -1 --to=recipient@example.com \ + --cc-cmd=./expected-cc-script.sh \ + --smtp-server="$(pwd)/fake.sendmail" && + test_cmp expected-cc commandline1 +' + test_expect_success $PREREQ 'setup expect' " cat >expected-show-all-headers <<\EOF 0001-Second.patch @@ -205,6 +224,7 @@ Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING In-Reply-To: <unique-message-id@example.com> References: <unique-message-id@example.com> +Reply-To: Reply <reply@example.com> Result: OK EOF @@ -297,6 +317,7 @@ test_expect_success $PREREQ 'Show all headers' ' --dry-run \ --suppress-cc=sob \ --from="Example <from@example.com>" \ + --reply-to="Reply <reply@example.com>" \ --to=to@example.com \ --cc=cc@example.com \ --bcc=bcc@example.com \ diff --git a/t/t9400-git-cvsserver-server.sh b/t/t9400-git-cvsserver-server.sh index c30660d606..06742748e9 100755 --- a/t/t9400-git-cvsserver-server.sh +++ b/t/t9400-git-cvsserver-server.sh @@ -447,12 +447,10 @@ test_expect_success 'cvs update (-p)' ' git push gitcvs.git >/dev/null && cd cvswork && GIT_CONFIG="$git_config" cvs update && - rm -f failures && for i in merge no-lf empty really-empty; do - GIT_CONFIG="$git_config" cvs update -p "$i" >$i.out - test_cmp $i.out ../$i >>failures 2>&1 - done && - test -z "$(cat failures)" + GIT_CONFIG="$git_config" cvs update -p "$i" >$i.out && + test_cmp $i.out ../$i || return 1 + done ' cd "$WORKDIR" diff --git a/t/t9402-git-cvsserver-refs.sh b/t/t9402-git-cvsserver-refs.sh index 6d2d3c8739..cf31ace667 100755 --- a/t/t9402-git-cvsserver-refs.sh +++ b/t/t9402-git-cvsserver-refs.sh @@ -455,20 +455,20 @@ test_expect_success 'cvs up -r $(git rev-parse v1)' ' ' test_expect_success 'cvs diff -r v1 -u' ' - ( cd cvswork && cvs -f diff -r v1 -u ) >cvsDiff.out 2>cvs.log && + ( cd cvswork && cvs -f diff -r v1 -u >../cvsDiff.out 2>../cvs.log ) && test_must_be_empty cvsDiff.out && test_must_be_empty cvs.log ' test_expect_success 'cvs diff -N -r v2 -u' ' - ( cd cvswork && ! cvs -f diff -N -r v2 -u ) >cvsDiff.out 2>cvs.log && + ( cd cvswork && ! cvs -f diff -N -r v2 -u >../cvsDiff.out 2>../cvs.log ) && test_must_be_empty cvs.log && test -s cvsDiff.out && check_diff cvsDiff.out v2 v1 >check_diff.out 2>&1 ' test_expect_success 'cvs diff -N -r v2 -r v1.2' ' - ( cd cvswork && ! cvs -f diff -N -r v2 -r v1.2 -u ) >cvsDiff.out 2>cvs.log && + ( cd cvswork && ! cvs -f diff -N -r v2 -r v1.2 -u >../cvsDiff.out 2>../cvs.log ) && test_must_be_empty cvs.log && test -s cvsDiff.out && check_diff cvsDiff.out v2 v1.2 >check_diff.out 2>&1 @@ -487,7 +487,7 @@ test_expect_success 'apply early [cvswork3] diff to b3' ' ' test_expect_success 'check [cvswork3] diff' ' - ( cd cvswork3 && ! cvs -f diff -N -u ) >"$WORKDIR/cvsDiff.out" 2>cvs.log && + ( cd cvswork3 && ! cvs -f diff -N -u >"$WORKDIR/cvsDiff.out" 2>../cvs.log ) && test_must_be_empty cvs.log && test -s cvsDiff.out && test $(grep Index: cvsDiff.out | wc -l) = 3 && diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index fc614dcbfa..b7f5b1e632 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -1237,17 +1237,19 @@ test_expect_success 'double dash "git" itself' ' test_expect_success 'double dash "git checkout"' ' test_completion "git checkout --" <<-\EOF --quiet Z + --detach Z + --track Z + --orphan=Z --ours Z --theirs Z - --track Z - --no-track Z --merge Z - --conflict= - --orphan Z + --conflict=Z --patch Z - --detach Z --ignore-skip-worktree-bits Z + --ignore-other-worktrees Z --recurse-submodules Z + --progress Z + --no-track Z --no-recurse-submodules Z EOF ' @@ -1495,4 +1497,35 @@ do ' done +test_expect_success 'sourcing the completion script clears cached commands' ' + __git_compute_all_commands && + verbose test -n "$__git_all_commands" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__git_all_commands" +' + +test_expect_success 'sourcing the completion script clears cached porcelain commands' ' + __git_compute_porcelain_commands && + verbose test -n "$__git_porcelain_commands" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__git_porcelain_commands" +' + +test_expect_success !GETTEXT_POISON 'sourcing the completion script clears cached merge strategies' ' + __git_compute_merge_strategies && + verbose test -n "$__git_merge_strategies" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__git_merge_strategies" +' + +test_expect_success 'sourcing the completion script clears cached --options' ' + __gitcomp_builtin checkout && + verbose test -n "$__gitcomp_builtin_checkout" && + __gitcomp_builtin notes_edit && + verbose test -n "$__gitcomp_builtin_notes_edit" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__gitcomp_builtin_checkout" && + verbose test -z "$__gitcomp_builtin_notes_edit" +' + test_done diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 97c9b32c2e..8f5c811dd7 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -735,22 +735,12 @@ test_expect_success 'prompt - hide if pwd ignored - env var set, config unset, p test_cmp expected "$actual" ' -test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stdout)' ' +test_expect_success 'prompt - hide if pwd ignored - inside gitdir' ' printf " (GIT_DIR!)" >expected && ( GIT_PS1_HIDE_IF_PWD_IGNORED=y && cd .git && - __git_ps1 >"$actual" 2>/dev/null - ) && - test_cmp expected "$actual" -' - -test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stderr)' ' - printf "" >expected && - ( - GIT_PS1_HIDE_IF_PWD_IGNORED=y && - cd .git && - __git_ps1 >/dev/null 2>"$actual" + __git_ps1 >"$actual" ) && test_cmp expected "$actual" ' diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 8a8a9329ee..b895366fee 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -629,30 +629,30 @@ test_must_fail () { _test_ok= ;; esac - "$@" + "$@" 2>&7 exit_code=$? if test $exit_code -eq 0 && ! list_contains "$_test_ok" success then - echo >&2 "test_must_fail: command succeeded: $*" + echo >&4 "test_must_fail: command succeeded: $*" return 1 elif test_match_signal 13 $exit_code && list_contains "$_test_ok" sigpipe then return 0 elif test $exit_code -gt 129 && test $exit_code -le 192 then - echo >&2 "test_must_fail: died by signal $(($exit_code - 128)): $*" + echo >&4 "test_must_fail: died by signal $(($exit_code - 128)): $*" return 1 elif test $exit_code -eq 127 then - echo >&2 "test_must_fail: command not found: $*" + echo >&4 "test_must_fail: command not found: $*" return 1 elif test $exit_code -eq 126 then - echo >&2 "test_must_fail: valgrind error: $*" + echo >&4 "test_must_fail: valgrind error: $*" return 1 fi return 0 -} +} 7>&2 2>&4 # Similar to test_must_fail, but tolerates success, too. This is # meant to be used in contexts like: @@ -668,8 +668,8 @@ test_must_fail () { # Accepts the same options as test_must_fail. test_might_fail () { - test_must_fail ok=success "$@" -} + test_must_fail ok=success "$@" 2>&7 +} 7>&2 2>&4 # Similar to test_must_fail and test_might_fail, but check that a # given command exited with a given exit code. Meant to be used as: @@ -681,16 +681,16 @@ test_might_fail () { test_expect_code () { want_code=$1 shift - "$@" + "$@" 2>&7 exit_code=$? if test $exit_code = $want_code then return 0 fi - echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" + echo >&4 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" return 1 -} +} 7>&2 2>&4 # test_cmp is a helper function to compare actual and expected output. # You can use it like: @@ -752,18 +752,18 @@ test_i18ngrep () { shift ! grep "$@" && return 0 - echo >&2 "error: '! grep $@' did find a match in:" + echo >&4 "error: '! grep $@' did find a match in:" else grep "$@" && return 0 - echo >&2 "error: 'grep $@' didn't find a match in:" + echo >&4 "error: 'grep $@' didn't find a match in:" fi if test -s "$last_arg" then - cat >&2 "$last_arg" + cat >&4 "$last_arg" else - echo >&2 "<File '$last_arg' is empty>" + echo >&4 "<File '$last_arg' is empty>" fi return 1 @@ -774,7 +774,7 @@ test_i18ngrep () { # not output anything when they fail. verbose () { "$@" && return 0 - echo >&2 "command failed: $(git rev-parse --sq-quote "$@")" + echo >&4 "command failed: $(git rev-parse --sq-quote "$@")" return 1 } @@ -782,7 +782,11 @@ verbose () { # otherwise. test_must_be_empty () { - if test -s "$1" + if ! test -f "$1" + then + echo "'$1' is missing" + return 1 + elif test -s "$1" then echo "'$1' is not empty, it contains:" cat "$1" @@ -892,8 +896,8 @@ test_write_lines () { } perl () { - command "$PERL_PATH" "$@" -} + command "$PERL_PATH" "$@" 2>&7 +} 7>&2 2>&4 # Is the value one of the various ways to spell a boolean true/false? test_normalize_bool () { @@ -1033,13 +1037,13 @@ test_env () { shift ;; *) - "$@" + "$@" 2>&7 exit ;; esac done ) -} +} 7>&2 2>&4 # Returns true if the numeric exit code in "$2" represents the expected signal # in "$1". Signals should be given numerically. @@ -1081,9 +1085,9 @@ nongit () { GIT_CEILING_DIRECTORIES=$(pwd) && export GIT_CEILING_DIRECTORIES && cd non-repo && - "$@" + "$@" 2>&7 ) -} +} 7>&2 2>&4 # convert stdin to pktline representation; note that empty input becomes an # empty packet, not a flush packet (for that you can just print 0000 yourself). diff --git a/t/test-lib.sh b/t/test-lib.sh index 816e692391..7740d511d2 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -264,7 +264,24 @@ do GIT_TEST_CHAIN_LINT=0 shift ;; -x) - trace=t + # Some test scripts can't be reliably traced with '-x', + # unless the test is run with a Bash version supporting + # BASH_XTRACEFD (introduced in Bash v4.1). Check whether + # this test is marked as such, and ignore '-x' if it + # isn't executed with a suitable Bash version. + if test -z "$test_untraceable" || { + test -n "$BASH_VERSION" && { + test ${BASH_VERSINFO[0]} -gt 4 || { + test ${BASH_VERSINFO[0]} -eq 4 && + test ${BASH_VERSINFO[1]} -ge 1 + } + } + } + then + trace=t + else + echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" + fi shift ;; --verbose-log) verbose_log=t @@ -940,7 +957,7 @@ then fi fi -GITPERLLIB="$GIT_BUILD_DIR"/perl/blib/lib:"$GIT_BUILD_DIR"/perl/blib/arch/auto/Git +GITPERLLIB="$GIT_BUILD_DIR"/perl/build/lib export GITPERLLIB test -d "$GIT_BUILD_DIR"/templates/blt || { error "You haven't built things yet, have you?" @@ -1107,6 +1124,10 @@ test_lazy_prereq EXPENSIVE ' test -n "$GIT_TEST_LONG" ' +test_lazy_prereq EXPENSIVE_ON_WINDOWS ' + test_have_prereq EXPENSIVE || test_have_prereq !MINGW,!CYGWIN +' + test_lazy_prereq USR_BIN_TIME ' test -x /usr/bin/time ' |