diff options
Diffstat (limited to 't')
49 files changed, 2372 insertions, 590 deletions
@@ -332,13 +332,10 @@ Writing Tests ------------- The test script is written as a shell script. It should start -with the standard "#!/bin/sh" with copyright notices, and an +with the standard "#!/bin/sh", and an assignment to variable 'test_description', like this: #!/bin/sh - # - # Copyright (c) 2005 Junio C Hamano - # test_description='xxx test (option --frotz) @@ -677,6 +674,11 @@ library for your script to use. <expected> file. This behaves like "cmp" but produces more helpful output when the test is run with "-v" option. + - test_cmp_rev <expected> <actual> + + Check whether the <expected> rev points to the same commit as the + <actual> rev. + - test_line_count (= | -lt | -ge | ...) <length> <file> Check whether a file has the length it is expected to. @@ -808,6 +810,18 @@ use these, and "test_set_prereq" for how to define your own. Git was compiled with support for PCRE. Wrap any tests that use git-grep --perl-regexp or git-grep -P in these. + - LIBPCRE1 + + Git was compiled with PCRE v1 support via + USE_LIBPCRE1=YesPlease. Wrap any PCRE using tests that for some + reason need v1 of the PCRE library instead of v2 in these. + + - LIBPCRE2 + + Git was compiled with PCRE v2 support via + USE_LIBPCRE2=YesPlease. Wrap any PCRE using tests that for some + reason need v2 of the PCRE library instead of v1 in these. + - CASE_INSENSITIVE_FS Test is run on a case insensitive file system. diff --git a/t/helper/.gitignore b/t/helper/.gitignore index 7c9d28a834..d02f9b39ac 100644 --- a/t/helper/.gitignore +++ b/t/helper/.gitignore @@ -3,7 +3,9 @@ /test-config /test-date /test-delta +/test-drop-caches /test-dump-cache-tree +/test-dump-fsmonitor /test-dump-split-index /test-dump-untracked-cache /test-fake-ssh diff --git a/t/helper/test-date.c b/t/helper/test-date.c index f414a3ac67..ac83687970 100644 --- a/t/helper/test-date.c +++ b/t/helper/test-date.c @@ -5,6 +5,7 @@ static const char *usage_msg = "\n" " test-date show:<format> [time_t]...\n" " test-date parse [date]...\n" " test-date approxidate [date]...\n" +" test-date timestamp [date]...\n" " test-date is64bit\n" " test-date time_t-is64bit\n"; @@ -71,6 +72,15 @@ static void parse_approxidate(const char **argv, struct timeval *now) } } +static void parse_approx_timestamp(const char **argv, struct timeval *now) +{ + for (; *argv; argv++) { + timestamp_t t; + t = approxidate_relative(*argv, now); + printf("%s -> %"PRItime"\n", *argv, t); + } +} + int cmd_main(int argc, const char **argv) { struct timeval now; @@ -95,6 +105,8 @@ int cmd_main(int argc, const char **argv) parse_dates(argv+1, &now); else if (!strcmp(*argv, "approxidate")) parse_approxidate(argv+1, &now); + else if (!strcmp(*argv, "timestamp")) + parse_approx_timestamp(argv+1, &now); else if (!strcmp(*argv, "is64bit")) return sizeof(timestamp_t) == 8 ? 0 : 1; else if (!strcmp(*argv, "time_t-is64bit")) diff --git a/t/helper/test-drop-caches.c b/t/helper/test-drop-caches.c new file mode 100644 index 0000000000..bd1a857d52 --- /dev/null +++ b/t/helper/test-drop-caches.c @@ -0,0 +1,164 @@ +#include "git-compat-util.h" + +#if defined(GIT_WINDOWS_NATIVE) + +static int cmd_sync(void) +{ + char Buffer[MAX_PATH]; + DWORD dwRet; + char szVolumeAccessPath[] = "\\\\.\\X:"; + HANDLE hVolWrite; + int success = 0; + + dwRet = GetCurrentDirectory(MAX_PATH, Buffer); + if ((0 == dwRet) || (dwRet > MAX_PATH)) + return error("Error getting current directory"); + + if ((Buffer[0] < 'A') || (Buffer[0] > 'Z')) + return error("Invalid drive letter '%c'", Buffer[0]); + + szVolumeAccessPath[4] = Buffer[0]; + hVolWrite = CreateFile(szVolumeAccessPath, GENERIC_READ | GENERIC_WRITE, + FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING, 0, NULL); + if (INVALID_HANDLE_VALUE == hVolWrite) + return error("Unable to open volume for writing, need admin access"); + + success = FlushFileBuffers(hVolWrite); + if (!success) + error("Unable to flush volume"); + + CloseHandle(hVolWrite); + + return !success; +} + +#define STATUS_SUCCESS (0x00000000L) +#define STATUS_PRIVILEGE_NOT_HELD (0xC0000061L) + +typedef enum _SYSTEM_INFORMATION_CLASS { + SystemMemoryListInformation = 80, +} SYSTEM_INFORMATION_CLASS; + +typedef enum _SYSTEM_MEMORY_LIST_COMMAND { + MemoryCaptureAccessedBits, + MemoryCaptureAndResetAccessedBits, + MemoryEmptyWorkingSets, + MemoryFlushModifiedList, + MemoryPurgeStandbyList, + MemoryPurgeLowPriorityStandbyList, + MemoryCommandMax +} SYSTEM_MEMORY_LIST_COMMAND; + +static BOOL GetPrivilege(HANDLE TokenHandle, LPCSTR lpName, int flags) +{ + BOOL bResult; + DWORD dwBufferLength; + LUID luid; + TOKEN_PRIVILEGES tpPreviousState; + TOKEN_PRIVILEGES tpNewState; + + dwBufferLength = 16; + bResult = LookupPrivilegeValueA(0, lpName, &luid); + if (bResult) { + tpNewState.PrivilegeCount = 1; + tpNewState.Privileges[0].Luid = luid; + tpNewState.Privileges[0].Attributes = 0; + bResult = AdjustTokenPrivileges(TokenHandle, 0, &tpNewState, + (DWORD)((LPBYTE)&(tpNewState.Privileges[1]) - (LPBYTE)&tpNewState), + &tpPreviousState, &dwBufferLength); + if (bResult) { + tpPreviousState.PrivilegeCount = 1; + tpPreviousState.Privileges[0].Luid = luid; + tpPreviousState.Privileges[0].Attributes = flags != 0 ? 2 : 0; + bResult = AdjustTokenPrivileges(TokenHandle, 0, &tpPreviousState, + dwBufferLength, 0, 0); + } + } + return bResult; +} + +static int cmd_dropcaches(void) +{ + HANDLE hProcess = GetCurrentProcess(); + HANDLE hToken; + HMODULE ntdll; + DWORD(WINAPI *NtSetSystemInformation)(INT, PVOID, ULONG); + SYSTEM_MEMORY_LIST_COMMAND command; + int status; + + if (!OpenProcessToken(hProcess, TOKEN_QUERY | TOKEN_ADJUST_PRIVILEGES, &hToken)) + return error("Can't open current process token"); + + if (!GetPrivilege(hToken, "SeProfileSingleProcessPrivilege", 1)) + return error("Can't get SeProfileSingleProcessPrivilege"); + + CloseHandle(hToken); + + ntdll = LoadLibrary("ntdll.dll"); + if (!ntdll) + return error("Can't load ntdll.dll, wrong Windows version?"); + + NtSetSystemInformation = + (DWORD(WINAPI *)(INT, PVOID, ULONG))GetProcAddress(ntdll, "NtSetSystemInformation"); + if (!NtSetSystemInformation) + return error("Can't get function addresses, wrong Windows version?"); + + command = MemoryPurgeStandbyList; + status = NtSetSystemInformation( + SystemMemoryListInformation, + &command, + sizeof(SYSTEM_MEMORY_LIST_COMMAND) + ); + if (status == STATUS_PRIVILEGE_NOT_HELD) + error("Insufficient privileges to purge the standby list, need admin access"); + else if (status != STATUS_SUCCESS) + error("Unable to execute the memory list command %d", status); + + FreeLibrary(ntdll); + + return status; +} + +#elif defined(__linux__) + +static int cmd_sync(void) +{ + return system("sync"); +} + +static int cmd_dropcaches(void) +{ + return system("echo 3 | sudo tee /proc/sys/vm/drop_caches"); +} + +#elif defined(__APPLE__) + +static int cmd_sync(void) +{ + return system("sync"); +} + +static int cmd_dropcaches(void) +{ + return system("sudo purge"); +} + +#else + +static int cmd_sync(void) +{ + return 0; +} + +static int cmd_dropcaches(void) +{ + return error("drop caches not implemented on this platform"); +} + +#endif + +int cmd_main(int argc, const char **argv) +{ + cmd_sync(); + return cmd_dropcaches(); +} diff --git a/t/helper/test-dump-fsmonitor.c b/t/helper/test-dump-fsmonitor.c new file mode 100644 index 0000000000..ad452707e8 --- /dev/null +++ b/t/helper/test-dump-fsmonitor.c @@ -0,0 +1,21 @@ +#include "cache.h" + +int cmd_main(int ac, const char **av) +{ + struct index_state *istate = &the_index; + int i; + + setup_git_directory(); + if (do_read_index(istate, get_index_file(), 0) < 0) + die("unable to read index file"); + if (!istate->fsmonitor_last_update) { + printf("no fsmonitor\n"); + return 0; + } + printf("fsmonitor last update %"PRIuMAX"\n", (uintmax_t)istate->fsmonitor_last_update); + + for (i = 0; i < istate->cache_nr; i++) + printf((istate->cache[i]->ce_flags & CE_FSMONITOR_VALID) ? "+" : "-"); + + return 0; +} diff --git a/t/interop/i5700-protocol-transition.sh b/t/interop/i5700-protocol-transition.sh new file mode 100755 index 0000000000..97e8e580ef --- /dev/null +++ b/t/interop/i5700-protocol-transition.sh @@ -0,0 +1,68 @@ +#!/bin/sh + +VERSION_A=. +VERSION_B=v2.0.0 + +: ${LIB_GIT_DAEMON_PORT:=5700} +LIB_GIT_DAEMON_COMMAND='git.b daemon' + +test_description='clone and fetch by client who is trying to use a new protocol' +. ./interop-lib.sh +. "$TEST_DIRECTORY"/lib-git-daemon.sh + +start_git_daemon --export-all + +repo=$GIT_DAEMON_DOCUMENT_ROOT_PATH/repo + +test_expect_success "create repo served by $VERSION_B" ' + git.b init "$repo" && + git.b -C "$repo" commit --allow-empty -m one +' + +test_expect_success "git:// clone with $VERSION_A and protocol v1" ' + GIT_TRACE_PACKET=1 git.a -c protocol.version=1 clone "$GIT_DAEMON_URL/repo" child 2>log && + git.a -C child log -1 --format=%s >actual && + git.b -C "$repo" log -1 --format=%s >expect && + test_cmp expect actual && + grep "version=1" log +' + +test_expect_success "git:// fetch with $VERSION_A and protocol v1" ' + git.b -C "$repo" commit --allow-empty -m two && + git.b -C "$repo" log -1 --format=%s >expect && + + GIT_TRACE_PACKET=1 git.a -C child -c protocol.version=1 fetch 2>log && + git.a -C child log -1 --format=%s FETCH_HEAD >actual && + + test_cmp expect actual && + grep "version=1" log && + ! grep "version 1" log +' + +stop_git_daemon + +test_expect_success "create repo served by $VERSION_B" ' + git.b init parent && + git.b -C parent commit --allow-empty -m one +' + +test_expect_success "file:// clone with $VERSION_A and protocol v1" ' + GIT_TRACE_PACKET=1 git.a -c protocol.version=1 clone --upload-pack="git.b upload-pack" parent child2 2>log && + git.a -C child2 log -1 --format=%s >actual && + git.b -C parent log -1 --format=%s >expect && + test_cmp expect actual && + ! grep "version 1" log +' + +test_expect_success "file:// fetch with $VERSION_A and protocol v1" ' + git.b -C parent commit --allow-empty -m two && + git.b -C parent log -1 --format=%s >expect && + + GIT_TRACE_PACKET=1 git.a -C child2 -c protocol.version=1 fetch --upload-pack="git.b upload-pack" 2>log && + git.a -C child2 log -1 --format=%s FETCH_HEAD >actual && + + test_cmp expect actual && + ! grep "version 1" log +' + +test_done diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index 43679a4c64..a5d3b2cbaa 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -31,7 +31,7 @@ then chmod 0700 ./gpghome && GNUPGHOME="$(pwd)/gpghome" && export GNUPGHOME && - (gpgconf --kill gpg-agent 2>&1 >/dev/null || : ) && + (gpgconf --kill gpg-agent >/dev/null 2>&1 || : ) && gpg --homedir "${GNUPGHOME}" 2>/dev/null --import \ "$TEST_DIRECTORY"/lib-gpg/keyring.gpg && gpg --homedir "${GNUPGHOME}" 2>/dev/null --import-ownertrust \ diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 0642ae7e6e..df19436314 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -67,6 +67,9 @@ LockFile accept.lock <IfModule !mod_unixd.c> LoadModule unixd_module modules/mod_unixd.so </IfModule> +<IfModule !mod_setenvif.c> + LoadModule setenvif_module modules/mod_setenvif.so +</IfModule> </IfVersion> PassEnv GIT_VALGRIND @@ -76,6 +79,10 @@ PassEnv ASAN_OPTIONS PassEnv GIT_TRACE PassEnv GIT_CONFIG_NOSYSTEM +<IfVersion >= 2.4> + SetEnvIf Git-Protocol ".*" GIT_PROTOCOL=$0 +</IfVersion> + Alias /dumb/ www/ Alias /auth/dumb/ www/auth/dumb/ diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index 2d26f86800..38dadd2c29 100755 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -306,9 +306,9 @@ test_submodule_content () { # to protect the history! # -# Test that submodule contents are currently not updated when switching -# between commits that change a submodule. -test_submodule_switch () { +# Internal function; use test_submodule_switch() or +# test_submodule_forced_switch() instead. +test_submodule_switch_common() { command="$1" ######################### Appearing submodule ######################### # Switching to a commit letting a submodule appear creates empty dir ... @@ -332,7 +332,7 @@ test_submodule_switch () { test_submodule_content sub1 origin/add_sub1 ) ' - # ... and doesn't care if it already exists ... + # ... and doesn't care if it already exists. test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" ' prolog && reset_work_tree_to no_submodule && @@ -347,19 +347,6 @@ test_submodule_switch () { test_submodule_content sub1 origin/add_sub1 ) ' - # ... unless there is an untracked file in its place. - test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" ' - prolog && - reset_work_tree_to no_submodule && - ( - cd submodule_update && - git branch -t add_sub1 origin/add_sub1 && - >sub1 && - test_must_fail $command add_sub1 && - test_superproject_content origin/no_submodule && - test_must_be_empty sub1 - ) - ' # Replacing a tracked file with a submodule produces an empty # directory ... test_expect_$RESULT "$command: replace tracked file with submodule creates empty directory" ' @@ -441,6 +428,11 @@ test_submodule_switch () { # submodule files with the newly checked out ones in the # directory of the same name while it shouldn't. RESULT="failure" + elif test "$KNOWN_FAILURE_FORCED_SWITCH_TESTS" = 1 + then + # All existing tests that use test_submodule_forced_switch() + # require this. + RESULT="failure" else RESULT="success" fi @@ -522,7 +514,6 @@ test_submodule_switch () { test_submodule_content sub1 origin/modify_sub1 ) ' - # Updating a submodule to an invalid sha1 doesn't update the # submodule's work tree, subsequent update will fail test_expect_$RESULT "$command: modified submodule does not update submodule work tree to invalid commit" ' @@ -555,235 +546,269 @@ test_submodule_switch () { ' } -# Test that submodule contents are currently not updated when switching -# between commits that change a submodule, but throwing away local changes in +# Declares and invokes several tests that, in various situations, checks that +# the provided transition function: +# - succeeds in updating the worktree and index of a superproject to a target +# commit, or fails atomically (depending on the test situation) +# - if succeeds, the contents of submodule directories are unchanged +# - if succeeds, once "git submodule update" is invoked, the contents of +# submodule directories are updated +# +# If the command under test is known to not work with submodules in certain +# conditions, set the appropriate KNOWN_FAILURE_* variable used in the tests +# below to 1. +# +# Use as follows: +# +# my_func () { +# target=$1 +# # Do something here that updates the worktree and index to match target, +# # but not any submodule directories. +# } +# test_submodule_switch "my_func" +test_submodule_switch () { + command="$1" + test_submodule_switch_common "$command" + + # An empty directory does not prevent the creation of a submodule of + # the same name, but a file does. + test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + >sub1 && + test_must_fail $command add_sub1 && + test_superproject_content origin/no_submodule && + test_must_be_empty sub1 + ) + ' +} + +# Same as test_submodule_switch(), except that throwing away local changes in # the superproject is allowed. test_submodule_forced_switch () { command="$1" - ######################### Appearing submodule ######################### - # Switching to a commit letting a submodule appear creates empty dir ... - test_expect_success "$command: added submodule creates empty directory" ' + KNOWN_FAILURE_FORCED_SWITCH_TESTS=1 + test_submodule_switch_common "$command" + + # When forced, a file in the superproject does not prevent creating a + # submodule of the same name. + test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" ' prolog && reset_work_tree_to no_submodule && ( cd submodule_update && git branch -t add_sub1 origin/add_sub1 && + >sub1 && $command add_sub1 && test_superproject_content origin/add_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && - test_submodule_content sub1 origin/add_sub1 + test_dir_is_empty sub1 ) ' - # ... and doesn't care if it already exists ... - test_expect_success "$command: added submodule leaves existing empty directory alone" ' +} + +# Test that submodule contents are correctly updated when switching +# between commits that change a submodule. +# Test that the following transitions are correctly handled: +# (These tests are also above in the case where we expect no change +# in the submodule) +# - Updated submodule +# - New submodule +# - Removed submodule +# - Directory containing tracked files replaced by submodule +# - Submodule replaced by tracked files in directory +# - Submodule replaced by tracked file with the same name +# - tracked file replaced by submodule +# +# New test cases +# - Removing a submodule with a git directory absorbs the submodules +# git directory first into the superproject. + +# Internal function; use test_submodule_switch_recursing_with_args() or +# test_submodule_forced_switch_recursing_with_args() instead. +test_submodule_recursing_with_args_common() { + command="$1" + + ######################### Appearing submodule ######################### + # Switching to a commit letting a submodule appear checks it out ... + test_expect_success "$command: added submodule is checked out" ' prolog && - reset_work_tree_to no_submodule && + reset_work_tree_to_interested no_submodule && ( cd submodule_update && git branch -t add_sub1 origin/add_sub1 && - mkdir sub1 && $command add_sub1 && test_superproject_content origin/add_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && test_submodule_content sub1 origin/add_sub1 ) ' - # ... unless there is an untracked file in its place. - test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" ' + # ... ignoring an empty existing directory. + test_expect_success "$command: added submodule is checked out in empty dir" ' prolog && - reset_work_tree_to no_submodule && + reset_work_tree_to_interested no_submodule && ( cd submodule_update && + mkdir sub1 && git branch -t add_sub1 origin/add_sub1 && - >sub1 && $command add_sub1 && test_superproject_content origin/add_sub1 && - test_dir_is_empty sub1 + test_submodule_content sub1 origin/add_sub1 ) ' - # Replacing a tracked file with a submodule produces an empty - # directory ... - test_expect_success "$command: replace tracked file with submodule creates empty directory" ' + test_expect_success "$command: submodule branch is not changed, detach HEAD instead" ' prolog && - reset_work_tree_to replace_sub1_with_file && + reset_work_tree_to_interested add_sub1 && + ( + cd submodule_update && + git -C sub1 checkout -b keep_branch && + git -C sub1 rev-parse HEAD >expect && + git branch -t check-keep origin/modify_sub1 && + $command check-keep && + test_superproject_content origin/modify_sub1 && + test_submodule_content sub1 origin/modify_sub1 && + git -C sub1 rev-parse keep_branch >actual && + test_cmp expect actual && + test_must_fail git -C sub1 symbolic-ref HEAD + ) + ' + + # Replacing a tracked file with a submodule produces a checked out submodule + test_expect_success "$command: replace tracked file with submodule checks out submodule" ' + prolog && + reset_work_tree_to_interested replace_sub1_with_file && ( cd submodule_update && git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && $command replace_file_with_sub1 && test_superproject_content origin/replace_file_with_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && test_submodule_content sub1 origin/replace_file_with_sub1 ) ' - # ... as does removing a directory with tracked files with a - # submodule. + # ... as does removing a directory with tracked files with a submodule. test_expect_success "$command: replace directory with submodule" ' prolog && - reset_work_tree_to replace_sub1_with_directory && + reset_work_tree_to_interested replace_sub1_with_directory && ( cd submodule_update && git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && $command replace_directory_with_sub1 && test_superproject_content origin/replace_directory_with_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && test_submodule_content sub1 origin/replace_directory_with_sub1 ) ' ######################## Disappearing submodule ####################### - # Removing a submodule doesn't remove its work tree ... - test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" ' + # Removing a submodule removes its work tree ... + test_expect_success "$command: removed submodule removes submodules working tree" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t remove_sub1 origin/remove_sub1 && $command remove_sub1 && test_superproject_content origin/remove_sub1 && - test_submodule_content sub1 origin/add_sub1 + ! test -e sub1 ) ' - # ... especially when it contains a .git directory. - test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" ' + # ... absorbing a .git directory along the way. + test_expect_success "$command: removed submodule absorbs submodules .git directory" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t remove_sub1 origin/remove_sub1 && replace_gitfile_with_git_dir sub1 && + rm -rf .git/modules && $command remove_sub1 && test_superproject_content origin/remove_sub1 && - test_git_directory_is_unchanged sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # Replacing a submodule with files in a directory must fail as the - # submodule work tree isn't removed ... - test_expect_failure "$command: replace submodule with a directory must fail" ' - prolog && - reset_work_tree_to add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && - test_must_fail $command replace_sub1_with_directory && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... especially when it contains a .git directory. - test_expect_failure "$command: replace submodule containing a .git directory with a directory must fail" ' - prolog && - reset_work_tree_to add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && - replace_gitfile_with_git_dir sub1 && - test_must_fail $command replace_sub1_with_directory && - test_superproject_content origin/add_sub1 && - test_git_directory_is_unchanged sub1 && - test_submodule_content sub1 origin/add_sub1 + ! test -e sub1 && + test_git_directory_exists sub1 ) ' - # Replacing it with a file must fail as it could throw away any local - # work tree changes ... - test_expect_failure "$command: replace submodule with a file must fail" ' + + # Replacing it with a file ... + test_expect_success "$command: replace submodule with a file" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - test_must_fail $command replace_sub1_with_file && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 + $command replace_sub1_with_file && + test_superproject_content origin/replace_sub1_with_file && + test -f sub1 ) ' - # ... or even destroy unpushed parts of submodule history if that - # still uses a .git directory. - test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" ' + RESULTDS=success + if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1 + then + RESULTDS=failure + fi + # ... must check its local work tree for untracked files + test_expect_$RESULTDS "$command: replace submodule with a file must fail with untracked files" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - replace_gitfile_with_git_dir sub1 && + : >sub1/untrackedfile && test_must_fail $command replace_sub1_with_file && test_superproject_content origin/add_sub1 && - test_git_directory_is_unchanged sub1 && test_submodule_content sub1 origin/add_sub1 + test -f sub1/untracked_file ) ' ########################## Modified submodule ######################### - # Updating a submodule sha1 doesn't update the submodule's work tree - test_expect_success "$command: modified submodule does not update submodule work tree" ' + # Updating a submodule sha1 updates the submodule's work tree + test_expect_success "$command: modified submodule updates submodule work tree" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t modify_sub1 origin/modify_sub1 && $command modify_sub1 && test_superproject_content origin/modify_sub1 && - test_submodule_content sub1 origin/add_sub1 && - git submodule update && test_submodule_content sub1 origin/modify_sub1 ) ' # Updating a submodule to an invalid sha1 doesn't update the - # submodule's work tree, subsequent update will fail - test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" ' + # superproject nor the submodule's work tree. + test_expect_success "$command: updating to a missing submodule commit fails" ' prolog && - reset_work_tree_to add_sub1 && + reset_work_tree_to_interested add_sub1 && ( cd submodule_update && git branch -t invalid_sub1 origin/invalid_sub1 && - $command invalid_sub1 && - test_superproject_content origin/invalid_sub1 && - test_submodule_content sub1 origin/add_sub1 && - test_must_fail git submodule update && + test_must_fail $command invalid_sub1 && + test_superproject_content origin/add_sub1 && test_submodule_content sub1 origin/add_sub1 ) ' - # Updating a submodule from an invalid sha1 doesn't update the - # submodule's work tree, subsequent update will succeed - test_expect_success "$command: modified submodule does not update submodule work tree from invalid commit" ' - prolog && - reset_work_tree_to invalid_sub1 && - ( - cd submodule_update && - git branch -t valid_sub1 origin/valid_sub1 && - $command valid_sub1 && - test_superproject_content origin/valid_sub1 && - test_dir_is_empty sub1 && - git submodule update --init --recursive && - test_submodule_content sub1 origin/valid_sub1 - ) - ' } -# Test that submodule contents are correctly updated when switching -# between commits that change a submodule. -# Test that the following transitions are correctly handled: -# (These tests are also above in the case where we expect no change -# in the submodule) -# - Updated submodule -# - New submodule -# - Removed submodule -# - Directory containing tracked files replaced by submodule -# - Submodule replaced by tracked files in directory -# - Submodule replaced by tracked file with the same name -# - tracked file replaced by submodule +# Declares and invokes several tests that, in various situations, checks that +# the provided Git command, when invoked with --recurse-submodules: +# - succeeds in updating the worktree and index of a superproject to a target +# commit, or fails atomically (depending on the test situation) +# - if succeeds, the contents of submodule directories are updated # -# New test cases -# - Removing a submodule with a git directory absorbs the submodules -# git directory first into the superproject. - +# Specify the Git command so that "git $GIT_COMMAND --recurse-submodules" +# works. +# +# If the command under test is known to not work with submodules in certain +# conditions, set the appropriate KNOWN_FAILURE_* variable used in the tests +# below to 1. +# +# Use as follows: +# +# test_submodule_switch_recursing_with_args "$GIT_COMMAND" test_submodule_switch_recursing_with_args () { cmd_args="$1" command="git $cmd_args --recurse-submodules" + test_submodule_recursing_with_args_common "$command" + RESULTDS=success if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1 then @@ -794,33 +819,8 @@ test_submodule_switch_recursing_with_args () { then RESULTOI=failure fi - ######################### Appearing submodule ######################### - # Switching to a commit letting a submodule appear checks it out ... - test_expect_success "$command: added submodule is checked out" ' - prolog && - reset_work_tree_to_interested no_submodule && - ( - cd submodule_update && - git branch -t add_sub1 origin/add_sub1 && - $command add_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... ignoring an empty existing directory ... - test_expect_success "$command: added submodule is checked out in empty dir" ' - prolog && - reset_work_tree_to_interested no_submodule && - ( - cd submodule_update && - mkdir sub1 && - git branch -t add_sub1 origin/add_sub1 && - $command add_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... unless there is an untracked file in its place. + # Switching to a commit letting a submodule appear cannot override an + # untracked file. test_expect_success "$command: added submodule doesn't remove untracked file with same name" ' prolog && reset_work_tree_to_interested no_submodule && @@ -848,59 +848,7 @@ test_submodule_switch_recursing_with_args () { test_submodule_content sub1 origin/add_sub1 ) ' - # Replacing a tracked file with a submodule produces a checked out submodule - test_expect_success "$command: replace tracked file with submodule checks out submodule" ' - prolog && - reset_work_tree_to_interested replace_sub1_with_file && - ( - cd submodule_update && - git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && - $command replace_file_with_sub1 && - test_superproject_content origin/replace_file_with_sub1 && - test_submodule_content sub1 origin/replace_file_with_sub1 - ) - ' - # ... as does removing a directory with tracked files with a submodule. - test_expect_success "$command: replace directory with submodule" ' - prolog && - reset_work_tree_to_interested replace_sub1_with_directory && - ( - cd submodule_update && - git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && - $command replace_directory_with_sub1 && - test_superproject_content origin/replace_directory_with_sub1 && - test_submodule_content sub1 origin/replace_directory_with_sub1 - ) - ' - ######################## Disappearing submodule ####################### - # Removing a submodule removes its work tree ... - test_expect_success "$command: removed submodule removes submodules working tree" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t remove_sub1 origin/remove_sub1 && - $command remove_sub1 && - test_superproject_content origin/remove_sub1 && - ! test -e sub1 - ) - ' - # ... absorbing a .git directory along the way. - test_expect_success "$command: removed submodule absorbs submodules .git directory" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t remove_sub1 origin/remove_sub1 && - replace_gitfile_with_git_dir sub1 && - rm -rf .git/modules && - $command remove_sub1 && - test_superproject_content origin/remove_sub1 && - ! test -e sub1 && - test_git_directory_exists sub1 - ) - ' # Replacing a submodule with files in a directory must succeeds # when the submodule is clean test_expect_$RESULTDS "$command: replace submodule with a directory" ' @@ -929,33 +877,6 @@ test_submodule_switch_recursing_with_args () { ) ' - # Replacing it with a file ... - test_expect_success "$command: replace submodule with a file" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - $command replace_sub1_with_file && - test_superproject_content origin/replace_sub1_with_file && - test -f sub1 - ) - ' - - # ... must check its local work tree for untracked files - test_expect_$RESULTDS "$command: replace submodule with a file must fail with untracked files" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - : >sub1/untrackedfile && - test_must_fail $command replace_sub1_with_file && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... and ignored files are ignored test_expect_success "$command: replace submodule with a file works ignores ignored files in submodule" ' test_when_finished "rm submodule_update/.git/modules/sub1/info/exclude" && @@ -971,20 +892,6 @@ test_submodule_switch_recursing_with_args () { ) ' - ########################## Modified submodule ######################### - # Updating a submodule sha1 updates the submodule's work tree - test_expect_success "$command: modified submodule updates submodule work tree" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t modify_sub1 origin/modify_sub1 && - $command modify_sub1 && - test_superproject_content origin/modify_sub1 && - test_submodule_content sub1 origin/modify_sub1 - ) - ' - test_expect_success "git -c submodule.recurse=true $cmd_args: modified submodule updates submodule work tree" ' prolog && reset_work_tree_to_interested add_sub1 && @@ -997,20 +904,6 @@ test_submodule_switch_recursing_with_args () { ) ' - # Updating a submodule to an invalid sha1 doesn't update the - # superproject nor the submodule's work tree. - test_expect_success "$command: updating to a missing submodule commit fails" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t invalid_sub1 origin/invalid_sub1 && - test_must_fail $command invalid_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # recursing deeper than one level doesn't work yet. test_expect_success "$command: modified submodule updates submodule recursively" ' prolog && @@ -1026,44 +919,20 @@ test_submodule_switch_recursing_with_args () { ' } -# Test that submodule contents are updated when switching between commits -# that change a submodule, but throwing away local changes in -# the superproject as well as the submodule is allowed. +# Same as test_submodule_switch_recursing_with_args(), except that throwing +# away local changes in the superproject is allowed. test_submodule_forced_switch_recursing_with_args () { cmd_args="$1" command="git $cmd_args --recurse-submodules" + test_submodule_recursing_with_args_common "$command" + RESULT=success if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1 then RESULT=failure fi - ######################### Appearing submodule ######################### - # Switching to a commit letting a submodule appear creates empty dir ... - test_expect_success "$command: added submodule is checked out" ' - prolog && - reset_work_tree_to_interested no_submodule && - ( - cd submodule_update && - git branch -t add_sub1 origin/add_sub1 && - $command add_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... and doesn't care if it already exists ... - test_expect_success "$command: added submodule ignores empty directory" ' - prolog && - reset_work_tree_to_interested no_submodule && - ( - cd submodule_update && - git branch -t add_sub1 origin/add_sub1 && - mkdir sub1 && - $command add_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' - # ... not caring about an untracked file either + # Switching to a commit letting a submodule appear does not care about + # an untracked file. test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" ' prolog && reset_work_tree_to_interested no_submodule && @@ -1076,60 +945,7 @@ test_submodule_forced_switch_recursing_with_args () { test_submodule_content sub1 origin/add_sub1 ) ' - # Replacing a tracked file with a submodule checks out the submodule - test_expect_success "$command: replace tracked file with submodule populates the submodule" ' - prolog && - reset_work_tree_to_interested replace_sub1_with_file && - ( - cd submodule_update && - git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && - $command replace_file_with_sub1 && - test_superproject_content origin/replace_file_with_sub1 && - test_submodule_content sub1 origin/replace_file_with_sub1 - ) - ' - # ... as does removing a directory with tracked files with a - # submodule. - test_expect_success "$command: replace directory with submodule" ' - prolog && - reset_work_tree_to_interested replace_sub1_with_directory && - ( - cd submodule_update && - git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && - $command replace_directory_with_sub1 && - test_superproject_content origin/replace_directory_with_sub1 && - test_submodule_content sub1 origin/replace_directory_with_sub1 - ) - ' - ######################## Disappearing submodule ####################### - # Removing a submodule doesn't remove its work tree ... - test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t remove_sub1 origin/remove_sub1 && - $command remove_sub1 && - test_superproject_content origin/remove_sub1 && - ! test -e sub1 - ) - ' - # ... especially when it contains a .git directory. - test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t remove_sub1 origin/remove_sub1 && - replace_gitfile_with_git_dir sub1 && - rm -rf .git/modules/sub1 && - $command remove_sub1 && - test_superproject_content origin/remove_sub1 && - test_git_directory_exists sub1 && - ! test -e sub1 - ) - ' # Replacing a submodule with files in a directory ... test_expect_success "$command: replace submodule with a directory" ' prolog && @@ -1156,17 +972,6 @@ test_submodule_forced_switch_recursing_with_args () { test_git_directory_exists sub1 ) ' - # Replacing it with a file - test_expect_success "$command: replace submodule with a file" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - $command replace_sub1_with_file && - test_superproject_content origin/replace_sub1_with_file - ) - ' # ... even if the submodule contains ignored files test_expect_success "$command: replace submodule with a file ignoring ignored files" ' @@ -1181,46 +986,6 @@ test_submodule_forced_switch_recursing_with_args () { ) ' - # ... but stops for untracked files that would be lost - test_expect_$RESULT "$command: replace submodule with a file stops for untracked files" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t replace_sub1_with_file origin/replace_sub1_with_file && - : >sub1/untracked_file && - test_must_fail $command replace_sub1_with_file && - test_superproject_content origin/add_sub1 && - test -f sub1/untracked_file - ) - ' - - ########################## Modified submodule ######################### - # Updating a submodule sha1 updates the submodule's work tree - test_expect_success "$command: modified submodule updates submodule work tree" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t modify_sub1 origin/modify_sub1 && - $command modify_sub1 && - test_superproject_content origin/modify_sub1 && - test_submodule_content sub1 origin/modify_sub1 - ) - ' - # Updating a submodule to an invalid sha1 doesn't update the - # submodule's work tree, subsequent update will fail - test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git branch -t invalid_sub1 origin/invalid_sub1 && - test_must_fail $command invalid_sub1 && - test_superproject_content origin/add_sub1 && - test_submodule_content sub1 origin/add_sub1 - ) - ' # Updating a submodule from an invalid sha1 updates test_expect_success "$command: modified submodule does update submodule work tree from invalid commit" ' prolog && diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index 1dbc85b214..e401208488 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -69,12 +69,17 @@ if (not @tests) { @tests = glob "p????-*.sh"; } +my $resultsdir = "test-results"; +if ($ENV{GIT_PERF_SUBSECTION} ne "") { + $resultsdir .= "/" . $ENV{GIT_PERF_SUBSECTION}; +} + my @subtests; my %shorttests; for my $t (@tests) { $t =~ s{(?:.*/)?(p(\d+)-[^/]+)\.sh$}{$1} or die "bad test name: $t"; my $n = $2; - my $fname = "test-results/$t.subtests"; + my $fname = "$resultsdir/$t.subtests"; open my $fp, "<", $fname or die "cannot open $fname: $!"; for (<$fp>) { chomp; @@ -98,7 +103,7 @@ sub read_descr { my %descrs; my $descrlen = 4; # "Test" for my $t (@subtests) { - $descrs{$t} = $shorttests{$t}.": ".read_descr("test-results/$t.descr"); + $descrs{$t} = $shorttests{$t}.": ".read_descr("$resultsdir/$t.descr"); $descrlen = length $descrs{$t} if length $descrs{$t}>$descrlen; } @@ -138,7 +143,7 @@ for my $t (@subtests) { my $firstr; for my $i (0..$#dirs) { my $d = $dirs[$i]; - $times{$prefixes{$d}.$t} = [get_times("test-results/$prefixes{$d}$t.times")]; + $times{$prefixes{$d}.$t} = [get_times("$resultsdir/$prefixes{$d}$t.times")]; my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; my $w = length format_times($r,$u,$s,$firstr); $colwidth[$i] = $w if $w > $colwidth[$i]; diff --git a/t/perf/lib-pack.sh b/t/perf/lib-pack.sh new file mode 100644 index 0000000000..d3865db286 --- /dev/null +++ b/t/perf/lib-pack.sh @@ -0,0 +1,25 @@ +# Helpers for dealing with large numbers of packs. + +# create $1 nonsense packs, each with a single blob +create_packs () { + perl -le ' + my ($n) = @ARGV; + for (1..$n) { + print "blob"; + print "data <<EOF"; + print "$_"; + print "EOF"; + print "checkpoint" + } + ' "$@" | + git fast-import +} + +# create a large number of packs, disabling any gc which might +# cause us to repack them +setup_many_packs () { + git config gc.auto 0 && + git config gc.autopacklimit 0 && + git config fastimport.unpacklimit 0 && + create_packs 500 +} diff --git a/t/perf/p4211-line-log.sh b/t/perf/p4211-line-log.sh index e0ed05907c..392bcc0e51 100755 --- a/t/perf/p4211-line-log.sh +++ b/t/perf/p4211-line-log.sh @@ -35,4 +35,8 @@ test_perf 'git log --oneline --raw --parents' ' git log --oneline --raw --parents >/dev/null ' +test_perf 'git log --oneline --raw --parents -1000' ' + git log --oneline --raw --parents -1000 >/dev/null +' + test_done diff --git a/t/perf/p5550-fetch-tags.sh b/t/perf/p5550-fetch-tags.sh index a5dc39f86a..d0e0e019ea 100755 --- a/t/perf/p5550-fetch-tags.sh +++ b/t/perf/p5550-fetch-tags.sh @@ -20,6 +20,7 @@ start to show a noticeable performance problem on my machine, but without taking too long to set up and run the tests. ' . ./perf-lib.sh +. "$TEST_DIRECTORY/perf/lib-pack.sh" # make a long nonsense history on branch $1, consisting of $2 commits, each # with a unique file pointing to the blob at $2. @@ -44,26 +45,6 @@ create_tags () { git update-ref --stdin } -# create $1 nonsense packs, each with a single blob -create_packs () { - perl -le ' - my ($n) = @ARGV; - for (1..$n) { - print "blob"; - print "data <<EOF"; - print "$_"; - print "EOF"; - } - ' "$@" | - git fast-import && - - git cat-file --batch-all-objects --batch-check='%(objectname)' | - while read sha1 - do - echo $sha1 | git pack-objects .git/objects/pack/pack - done -} - test_expect_success 'create parent and child' ' git init parent && git -C parent commit --allow-empty -m base && @@ -84,9 +65,7 @@ test_expect_success 'populate parent tags' ' test_expect_success 'create child packs' ' ( cd child && - git config gc.auto 0 && - git config gc.autopacklimit 0 && - create_packs 500 + setup_many_packs ) ' diff --git a/t/perf/p5551-fetch-rescan.sh b/t/perf/p5551-fetch-rescan.sh new file mode 100755 index 0000000000..b99dc23e32 --- /dev/null +++ b/t/perf/p5551-fetch-rescan.sh @@ -0,0 +1,55 @@ +#!/bin/sh + +test_description='fetch performance with many packs + +It is common for fetch to consider objects that we might not have, and it is an +easy mistake for the code to use a function like `parse_object` that might +give the correct _answer_ on such an object, but do so slowly (due to +re-scanning the pack directory for lookup failures). + +The resulting performance drop can be hard to notice in a real repository, but +becomes quite large in a repository with a large number of packs. So this +test creates a more pathological case, since any mistakes would produce a more +noticeable slowdown. +' +. ./perf-lib.sh +. "$TEST_DIRECTORY"/perf/lib-pack.sh + +test_expect_success 'create parent and child' ' + git init parent && + git clone parent child +' + + +test_expect_success 'create refs in the parent' ' + ( + cd parent && + git commit --allow-empty -m foo && + head=$(git rev-parse HEAD) && + test_seq 1000 | + sed "s,.*,update refs/heads/& $head," | + $MODERN_GIT update-ref --stdin + ) +' + +test_expect_success 'create many packs in the child' ' + ( + cd child && + setup_many_packs + ) +' + +test_perf 'fetch' ' + # start at the same state for each iteration + obj=$($MODERN_GIT -C parent rev-parse HEAD) && + ( + cd child && + $MODERN_GIT for-each-ref --format="delete %(refname)" refs/remotes | + $MODERN_GIT update-ref --stdin && + rm -vf .git/objects/$(echo $obj | sed "s|^..|&/|") && + + git fetch + ) +' + +test_done diff --git a/t/perf/p7519-fsmonitor.sh b/t/perf/p7519-fsmonitor.sh new file mode 100755 index 0000000000..16d1bf72e5 --- /dev/null +++ b/t/perf/p7519-fsmonitor.sh @@ -0,0 +1,184 @@ +#!/bin/sh + +test_description="Test core.fsmonitor" + +. ./perf-lib.sh + +# +# Performance test for the fsmonitor feature which enables git to talk to a +# file system change monitor and avoid having to scan the working directory +# for new or modified files. +# +# By default, the performance test will utilize the Watchman file system +# monitor if it is installed. If Watchman is not installed, it will use a +# dummy integration script that does not report any new or modified files. +# The dummy script has very little overhead which provides optimistic results. +# +# The performance test will also use the untracked cache feature if it is +# available as fsmonitor uses it to speed up scanning for untracked files. +# +# There are 3 environment variables that can be used to alter the default +# behavior of the performance test: +# +# GIT_PERF_7519_UNTRACKED_CACHE: used to configure core.untrackedCache +# GIT_PERF_7519_SPLIT_INDEX: used to configure core.splitIndex +# GIT_PERF_7519_FSMONITOR: used to configure core.fsMonitor +# +# The big win for using fsmonitor is the elimination of the need to scan the +# working directory looking for changed and untracked files. If the file +# information is all cached in RAM, the benefits are reduced. +# +# GIT_PERF_7519_DROP_CACHE: if set, the OS caches are dropped between tests +# + +test_perf_large_repo +test_checkout_worktree + +test_lazy_prereq UNTRACKED_CACHE ' + { git update-index --test-untracked-cache; ret=$?; } && + test $ret -ne 1 +' + +test_lazy_prereq WATCHMAN ' + { command -v watchman >/dev/null 2>&1; ret=$?; } && + test $ret -ne 1 +' + +if test_have_prereq WATCHMAN +then + # Convert unix style paths to escaped Windows style paths for Watchman + case "$(uname -s)" in + MSYS_NT*) + GIT_WORK_TREE="$(cygpath -aw "$PWD" | sed 's,\\,/,g')" + ;; + *) + GIT_WORK_TREE="$PWD" + ;; + esac +fi + +if test -n "$GIT_PERF_7519_DROP_CACHE" +then + # When using GIT_PERF_7519_DROP_CACHE, GIT_PERF_REPEAT_COUNT must be 1 to + # generate valid results. Otherwise the caching that happens for the nth + # run will negate the validity of the comparisons. + if test "$GIT_PERF_REPEAT_COUNT" -ne 1 + then + echo "warning: Setting GIT_PERF_REPEAT_COUNT=1" >&2 + GIT_PERF_REPEAT_COUNT=1 + fi +fi + +test_expect_success "setup for fsmonitor" ' + # set untrackedCache depending on the environment + if test -n "$GIT_PERF_7519_UNTRACKED_CACHE" + then + git config core.untrackedCache "$GIT_PERF_7519_UNTRACKED_CACHE" + else + if test_have_prereq UNTRACKED_CACHE + then + git config core.untrackedCache true + else + git config core.untrackedCache false + fi + fi && + + # set core.splitindex depending on the environment + if test -n "$GIT_PERF_7519_SPLIT_INDEX" + then + git config core.splitIndex "$GIT_PERF_7519_SPLIT_INDEX" + fi && + + # set INTEGRATION_SCRIPT depending on the environment + if test -n "$GIT_PERF_7519_FSMONITOR" + then + INTEGRATION_SCRIPT="$GIT_PERF_7519_FSMONITOR" + else + # + # Choose integration script based on existence of Watchman. + # If Watchman exists, watch the work tree and attempt a query. + # If everything succeeds, use Watchman integration script, + # else fall back to an empty integration script. + # + mkdir .git/hooks && + if test_have_prereq WATCHMAN + then + INTEGRATION_SCRIPT=".git/hooks/fsmonitor-watchman" && + cp "$TEST_DIRECTORY/../templates/hooks--fsmonitor-watchman.sample" "$INTEGRATION_SCRIPT" && + watchman watch "$GIT_WORK_TREE" && + watchman watch-list | grep -q -F "$GIT_WORK_TREE" + else + INTEGRATION_SCRIPT=".git/hooks/fsmonitor-empty" && + write_script "$INTEGRATION_SCRIPT"<<-\EOF + EOF + fi + fi && + + git config core.fsmonitor "$INTEGRATION_SCRIPT" && + git update-index --fsmonitor +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-drop-caches +fi + +test_perf "status (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-drop-caches +fi + +test_perf "status -uno (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status -uno +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-drop-caches +fi + +test_perf "status -uall (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status -uall +' + +test_expect_success "setup without fsmonitor" ' + unset INTEGRATION_SCRIPT && + git config --unset core.fsmonitor && + git update-index --no-fsmonitor +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-drop-caches +fi + +test_perf "status (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-drop-caches +fi + +test_perf "status -uno (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status -uno +' + +if test -n "$GIT_PERF_7519_DROP_CACHE"; then + test-drop-caches +fi + +test_perf "status -uall (fsmonitor=$INTEGRATION_SCRIPT)" ' + git status -uall +' + +if test_have_prereq WATCHMAN +then + watchman watch-del "$GIT_WORK_TREE" >/dev/null 2>&1 && + + # Work around Watchman bug on Windows where it holds on to handles + # preventing the removal of the trash directory + watchman shutdown-server >/dev/null 2>&1 +fi + +test_done diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh index b50211b259..e4c343a6b7 100644 --- a/t/perf/perf-lib.sh +++ b/t/perf/perf-lib.sh @@ -56,12 +56,10 @@ MODERN_GIT=$GIT_BUILD_DIR/bin-wrappers/git export MODERN_GIT perf_results_dir=$TEST_OUTPUT_DIRECTORY/test-results +test -n "$GIT_PERF_SUBSECTION" && perf_results_dir="$perf_results_dir/$GIT_PERF_SUBSECTION" mkdir -p "$perf_results_dir" rm -f "$perf_results_dir"/$(basename "$0" .sh).subtests -if test -z "$GIT_PERF_REPEAT_COUNT"; then - GIT_PERF_REPEAT_COUNT=3 -fi die_if_build_dir_not_repo () { if ! ( cd "$TEST_DIRECTORY/.." && git rev-parse --build-dir >/dev/null 2>&1 ); then diff --git a/t/perf/run b/t/perf/run index beb4acc0e4..43e4de49ef 100755 --- a/t/perf/run +++ b/t/perf/run @@ -2,9 +2,14 @@ case "$1" in --help) - echo "usage: $0 [other_git_tree...] [--] [test_scripts]" + echo "usage: $0 [--config file] [other_git_tree...] [--] [test_scripts]" exit 0 ;; + --config) + shift + GIT_PERF_CONFIG_FILE=$(cd "$(dirname "$1")"; pwd)/$(basename "$1") + export GIT_PERF_CONFIG_FILE + shift ;; esac die () { @@ -29,8 +34,10 @@ unpack_git_rev () { (cd "$(git rev-parse --show-cdup)" && git archive --format=tar $rev) | (cd build/$rev && tar x) } + build_git_rev () { rev=$1 + name="$2" for config in config.mak config.mak.autogen config.status do if test -e "../../$config" @@ -38,7 +45,7 @@ build_git_rev () { cp "../../$config" "build/$rev/" fi done - echo "=== Building $rev ===" + echo "=== Building $rev ($name) ===" ( cd build/$rev && if test -n "$GIT_PERF_MAKE_COMMAND" @@ -65,7 +72,7 @@ run_dirs_helper () { if [ ! -d build/$rev ]; then unpack_git_rev $rev fi - build_git_rev $rev + build_git_rev $rev "$mydir" mydir=build/$rev fi if test "$mydir" = .; then @@ -87,14 +94,78 @@ run_dirs () { done } -GIT_PERF_AGGREGATING_LATER=t -export GIT_PERF_AGGREGATING_LATER +get_subsections () { + section="$1" + test -z "$GIT_PERF_CONFIG_FILE" && return + git config -f "$GIT_PERF_CONFIG_FILE" --name-only --get-regex "$section\..*\.[^.]+" | + sed -e "s/$section\.\(.*\)\..*/\1/" | sort | uniq +} + +get_var_from_env_or_config () { + env_var="$1" + conf_sec="$2" + conf_var="$3" + # $4 can be set to a default value + + # Do nothing if the env variable is already set + eval "test -z \"\${$env_var+x}\"" || return + + test -z "$GIT_PERF_CONFIG_FILE" && return + + # Check if the variable is in the config file + if test -n "$GIT_PERF_SUBSECTION" + then + var="$conf_sec.$GIT_PERF_SUBSECTION.$conf_var" + conf_value=$(git config -f "$GIT_PERF_CONFIG_FILE" "$var") && + eval "$env_var=\"$conf_value\"" && return + fi + var="$conf_sec.$conf_var" + conf_value=$(git config -f "$GIT_PERF_CONFIG_FILE" "$var") && + eval "$env_var=\"$conf_value\"" && return + + test -n "${4+x}" && eval "$env_var=\"$4\"" +} + +run_subsection () { + get_var_from_env_or_config "GIT_PERF_REPEAT_COUNT" "perf" "repeatCount" 3 + export GIT_PERF_REPEAT_COUNT + + get_var_from_env_or_config "GIT_PERF_DIRS_OR_REVS" "perf" "dirsOrRevs" + set -- $GIT_PERF_DIRS_OR_REVS "$@" + + get_var_from_env_or_config "GIT_PERF_MAKE_COMMAND" "perf" "makeCommand" + get_var_from_env_or_config "GIT_PERF_MAKE_OPTS" "perf" "makeOpts" + + GIT_PERF_AGGREGATING_LATER=t + export GIT_PERF_AGGREGATING_LATER + + if test $# = 0 -o "$1" = -- -o -f "$1"; then + set -- . "$@" + fi + + run_dirs "$@" + ./aggregate.perl "$@" +} cd "$(dirname $0)" . ../../GIT-BUILD-OPTIONS -if test $# = 0 -o "$1" = -- -o -f "$1"; then - set -- . "$@" +mkdir -p test-results +get_subsections "perf" >test-results/run_subsections.names + +if test $(wc -l <test-results/run_subsections.names) -eq 0 +then + ( + run_subsection "$@" + ) +else + while read -r subsec + do + ( + GIT_PERF_SUBSECTION="$subsec" + export GIT_PERF_SUBSECTION + echo "======== Run for subsection '$GIT_PERF_SUBSECTION' ========" + run_subsection "$@" + ) + done <test-results/run_subsections.names fi -run_dirs "$@" -./aggregate.perl "$@" diff --git a/t/t0021/rot13-filter.pl b/t/t0021/rot13-filter.pl index ad685d92f8..f1678851de 100644 --- a/t/t0021/rot13-filter.pl +++ b/t/t0021/rot13-filter.pl @@ -30,9 +30,12 @@ # to the "list_available_blobs" response. # +use 5.008; +use lib (split(/:/, $ENV{GITPERLLIB})); use strict; use warnings; use IO::File; +use Git::Packet; my $MAX_PACKET_CONTENT_SIZE = 65516; my $log_file = shift @ARGV; @@ -55,89 +58,30 @@ sub rot13 { return $str; } -sub packet_bin_read { - my $buffer; - my $bytes_read = read STDIN, $buffer, 4; - if ( $bytes_read == 0 ) { - # EOF - Git stopped talking to us! - print $debug "STOP\n"; - exit(); - } - elsif ( $bytes_read != 4 ) { - die "invalid packet: '$buffer'"; - } - my $pkt_size = hex($buffer); - if ( $pkt_size == 0 ) { - return ( 1, "" ); - } - elsif ( $pkt_size > 4 ) { - my $content_size = $pkt_size - 4; - $bytes_read = read STDIN, $buffer, $content_size; - if ( $bytes_read != $content_size ) { - die "invalid packet ($content_size bytes expected; $bytes_read bytes read)"; - } - return ( 0, $buffer ); - } - else { - die "invalid packet size: $pkt_size"; - } -} - -sub packet_txt_read { - my ( $res, $buf ) = packet_bin_read(); - unless ( $buf eq '' or $buf =~ s/\n$// ) { - die "A non-binary line MUST be terminated by an LF."; - } - return ( $res, $buf ); -} - -sub packet_bin_write { - my $buf = shift; - print STDOUT sprintf( "%04x", length($buf) + 4 ); - print STDOUT $buf; - STDOUT->flush(); -} - -sub packet_txt_write { - packet_bin_write( $_[0] . "\n" ); -} - -sub packet_flush { - print STDOUT sprintf( "%04x", 0 ); - STDOUT->flush(); -} - print $debug "START\n"; $debug->flush(); -( packet_txt_read() eq ( 0, "git-filter-client" ) ) || die "bad initialize"; -( packet_txt_read() eq ( 0, "version=2" ) ) || die "bad version"; -( packet_bin_read() eq ( 1, "" ) ) || die "bad version end"; +packet_initialize("git-filter", 2); -packet_txt_write("git-filter-server"); -packet_txt_write("version=2"); -packet_flush(); +my %remote_caps = packet_read_and_check_capabilities("clean", "smudge", "delay"); +packet_check_and_write_capabilities(\%remote_caps, @capabilities); -( packet_txt_read() eq ( 0, "capability=clean" ) ) || die "bad capability"; -( packet_txt_read() eq ( 0, "capability=smudge" ) ) || die "bad capability"; -( packet_txt_read() eq ( 0, "capability=delay" ) ) || die "bad capability"; -( packet_bin_read() eq ( 1, "" ) ) || die "bad capability end"; - -foreach (@capabilities) { - packet_txt_write( "capability=" . $_ ); -} -packet_flush(); print $debug "init handshake complete\n"; $debug->flush(); while (1) { - my ( $command ) = packet_txt_read() =~ /^command=(.+)$/; + my ( $res, $command ) = packet_key_val_read("command"); + if ( $res == -1 ) { + print $debug "STOP\n"; + exit(); + } print $debug "IN: $command"; $debug->flush(); if ( $command eq "list_available_blobs" ) { # Flush - packet_bin_read(); + packet_compare_lists([1, ""], packet_bin_read()) || + die "bad list_available_blobs end"; foreach my $pathname ( sort keys %DELAY ) { if ( $DELAY{$pathname}{"requested"} >= 1 ) { @@ -161,16 +105,14 @@ while (1) { $debug->flush(); packet_txt_write("status=success"); packet_flush(); - } - else { - my ( $pathname ) = packet_txt_read() =~ /^pathname=(.+)$/; + } else { + my ( $res, $pathname ) = packet_key_val_read("pathname"); + if ( $res == -1 ) { + die "unexpected EOF while expecting pathname"; + } print $debug " $pathname"; $debug->flush(); - if ( $pathname eq "" ) { - die "bad pathname '$pathname'"; - } - # Read until flush my ( $done, $buffer ) = packet_txt_read(); while ( $buffer ne '' ) { @@ -184,6 +126,9 @@ while (1) { ( $done, $buffer ) = packet_txt_read(); } + if ( $done == -1 ) { + die "unexpected EOF after pathname '$pathname'"; + } my $input = ""; { @@ -194,6 +139,9 @@ while (1) { ( $done, $buffer ) = packet_bin_read(); $input .= $buffer; } + if ( $done == -1 ) { + die "unexpected EOF while reading input for '$pathname'"; + } print $debug " " . length($input) . " [OK] -- "; $debug->flush(); } @@ -201,17 +149,13 @@ while (1) { my $output; if ( exists $DELAY{$pathname} and exists $DELAY{$pathname}{"output"} ) { $output = $DELAY{$pathname}{"output"} - } - elsif ( $pathname eq "error.r" or $pathname eq "abort.r" ) { + } elsif ( $pathname eq "error.r" or $pathname eq "abort.r" ) { $output = ""; - } - elsif ( $command eq "clean" and grep( /^clean$/, @capabilities ) ) { + } elsif ( $command eq "clean" and grep( /^clean$/, @capabilities ) ) { $output = rot13($input); - } - elsif ( $command eq "smudge" and grep( /^smudge$/, @capabilities ) ) { + } elsif ( $command eq "smudge" and grep( /^smudge$/, @capabilities ) ) { $output = rot13($input); - } - else { + } else { die "bad command '$command'"; } @@ -220,25 +164,21 @@ while (1) { $debug->flush(); packet_txt_write("status=error"); packet_flush(); - } - elsif ( $pathname eq "abort.r" ) { + } elsif ( $pathname eq "abort.r" ) { print $debug "[ABORT]\n"; $debug->flush(); packet_txt_write("status=abort"); packet_flush(); - } - elsif ( $command eq "smudge" and + } elsif ( $command eq "smudge" and exists $DELAY{$pathname} and - $DELAY{$pathname}{"requested"} == 1 - ) { + $DELAY{$pathname}{"requested"} == 1 ) { print $debug "[DELAYED]\n"; $debug->flush(); packet_txt_write("status=delayed"); packet_flush(); $DELAY{$pathname}{"requested"} = 2; $DELAY{$pathname}{"output"} = $output; - } - else { + } else { packet_txt_write("status=success"); packet_flush(); @@ -258,8 +198,7 @@ while (1) { print $debug "."; if ( length($output) > $MAX_PACKET_CONTENT_SIZE ) { $output = substr( $output, $MAX_PACKET_CONTENT_SIZE ); - } - else { + } else { $output = ""; } } diff --git a/t/t0025-crlf-renormalize.sh b/t/t0025-crlf-renormalize.sh new file mode 100755 index 0000000000..9d9e02a211 --- /dev/null +++ b/t/t0025-crlf-renormalize.sh @@ -0,0 +1,30 @@ +#!/bin/sh + +test_description='CRLF renormalization' + +. ./test-lib.sh + +test_expect_success setup ' + git config core.autocrlf false && + printf "LINEONE\nLINETWO\nLINETHREE\n" >LF.txt && + printf "LINEONE\r\nLINETWO\r\nLINETHREE\r\n" >CRLF.txt && + printf "LINEONE\r\nLINETWO\nLINETHREE\n" >CRLF_mix_LF.txt && + git add . && + git commit -m initial +' + +test_expect_success 'renormalize CRLF in repo' ' + echo "*.txt text=auto" >.gitattributes && + git add --renormalize "*.txt" && + cat >expect <<-\EOF && + i/lf w/crlf attr/text=auto CRLF.txt + i/lf w/lf attr/text=auto LF.txt + i/lf w/mixed attr/text=auto CRLF_mix_LF.txt + EOF + git ls-files --eol | + sed -e "s/ / /g" -e "s/ */ /g" | + sort >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 364a537000..cbeb9bebee 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -901,6 +901,36 @@ test_expect_success 'get --path barfs on boolean variable' ' test_must_fail git config --get --path path.bool ' +test_expect_success 'get --expiry-date' ' + rel="3.weeks.5.days.00:00" && + rel_out="$rel ->" && + cat >.git/config <<-\EOF && + [date] + valid1 = "3.weeks.5.days 00:00" + valid2 = "Fri Jun 4 15:46:55 2010" + valid3 = "2017/11/11 11:11:11PM" + valid4 = "2017/11/10 09:08:07 PM" + valid5 = "never" + invalid1 = "abc" + EOF + cat >expect <<-EOF && + $(test-date timestamp $rel) + 1275666415 + 1510441871 + 1510348087 + 0 + EOF + { + echo "$rel_out $(git config --expiry-date date.valid1)" + git config --expiry-date date.valid2 && + git config --expiry-date date.valid3 && + git config --expiry-date date.valid4 && + git config --expiry-date date.valid5 + } >actual && + test_cmp expect actual && + test_must_fail git config --expiry-date date.invalid1 +' + cat > expect << EOF [quote] leading = " test" diff --git a/t/t1409-avoid-packing-refs.sh b/t/t1409-avoid-packing-refs.sh new file mode 100755 index 0000000000..e5cb8a252d --- /dev/null +++ b/t/t1409-avoid-packing-refs.sh @@ -0,0 +1,118 @@ +#!/bin/sh + +test_description='avoid rewriting packed-refs unnecessarily' + +. ./test-lib.sh + +# Add an identifying mark to the packed-refs file header line. This +# shouldn't upset readers, and it should be omitted if the file is +# ever rewritten. +mark_packed_refs () { + sed -e "s/^\(#.*\)/\1 t1409 /" <.git/packed-refs >.git/packed-refs.new && + mv .git/packed-refs.new .git/packed-refs +} + +# Verify that the packed-refs file is still marked. +check_packed_refs_marked () { + grep -q '^#.* t1409 ' .git/packed-refs +} + +test_expect_success 'setup' ' + git commit --allow-empty -m "Commit A" && + A=$(git rev-parse HEAD) && + git commit --allow-empty -m "Commit B" && + B=$(git rev-parse HEAD) && + git commit --allow-empty -m "Commit C" && + C=$(git rev-parse HEAD) +' + +test_expect_success 'do not create packed-refs file gratuitously' ' + test_must_fail test -f .git/packed-refs && + git update-ref refs/heads/foo $A && + test_must_fail test -f .git/packed-refs && + git update-ref refs/heads/foo $B && + test_must_fail test -f .git/packed-refs && + git update-ref refs/heads/foo $C $B && + test_must_fail test -f .git/packed-refs && + git update-ref -d refs/heads/foo && + test_must_fail test -f .git/packed-refs +' + +test_expect_success 'check that marking the packed-refs file works' ' + git for-each-ref >expected && + git pack-refs --all && + mark_packed_refs && + check_packed_refs_marked && + git for-each-ref >actual && + test_cmp expected actual && + git pack-refs --all && + test_must_fail check_packed_refs_marked && + git for-each-ref >actual2 && + test_cmp expected actual2 +' + +test_expect_success 'leave packed-refs untouched on update of packed' ' + git update-ref refs/heads/packed-update $A && + git pack-refs --all && + mark_packed_refs && + git update-ref refs/heads/packed-update $B && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on checked update of packed' ' + git update-ref refs/heads/packed-checked-update $A && + git pack-refs --all && + mark_packed_refs && + git update-ref refs/heads/packed-checked-update $B $A && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on verify of packed' ' + git update-ref refs/heads/packed-verify $A && + git pack-refs --all && + mark_packed_refs && + echo "verify refs/heads/packed-verify $A" | git update-ref --stdin && + check_packed_refs_marked +' + +test_expect_success 'touch packed-refs on delete of packed' ' + git update-ref refs/heads/packed-delete $A && + git pack-refs --all && + mark_packed_refs && + git update-ref -d refs/heads/packed-delete && + test_must_fail check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on update of loose' ' + git pack-refs --all && + git update-ref refs/heads/loose-update $A && + mark_packed_refs && + git update-ref refs/heads/loose-update $B && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on checked update of loose' ' + git pack-refs --all && + git update-ref refs/heads/loose-checked-update $A && + mark_packed_refs && + git update-ref refs/heads/loose-checked-update $B $A && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on verify of loose' ' + git pack-refs --all && + git update-ref refs/heads/loose-verify $A && + mark_packed_refs && + echo "verify refs/heads/loose-verify $A" | git update-ref --stdin && + check_packed_refs_marked +' + +test_expect_success 'leave packed-refs untouched on delete of loose' ' + git pack-refs --all && + git update-ref refs/heads/loose-delete $A && + mark_packed_refs && + git update-ref -d refs/heads/loose-delete && + check_packed_refs_marked +' + +test_done diff --git a/t/t1430-bad-ref-name.sh b/t/t1430-bad-ref-name.sh index e88349c8a0..c7878a60ed 100755 --- a/t/t1430-bad-ref-name.sh +++ b/t/t1430-bad-ref-name.sh @@ -331,4 +331,47 @@ test_expect_success 'update-ref --stdin -z fails delete with bad ref name' ' grep "fatal: invalid ref format: ~a" err ' +test_expect_success 'branch rejects HEAD as a branch name' ' + test_must_fail git branch HEAD HEAD^ && + test_must_fail git show-ref refs/heads/HEAD +' + +test_expect_success 'checkout -b rejects HEAD as a branch name' ' + test_must_fail git checkout -B HEAD HEAD^ && + test_must_fail git show-ref refs/heads/HEAD +' + +test_expect_success 'update-ref can operate on refs/heads/HEAD' ' + git update-ref refs/heads/HEAD HEAD^ && + git show-ref refs/heads/HEAD && + git update-ref -d refs/heads/HEAD && + test_must_fail git show-ref refs/heads/HEAD +' + +test_expect_success 'branch -d can remove refs/heads/HEAD' ' + git update-ref refs/heads/HEAD HEAD^ && + git branch -d HEAD && + test_must_fail git show-ref refs/heads/HEAD +' + +test_expect_success 'branch -m can rename refs/heads/HEAD' ' + git update-ref refs/heads/HEAD HEAD^ && + git branch -m HEAD tail && + test_must_fail git show-ref refs/heads/HEAD && + git show-ref refs/heads/tail +' + +test_expect_success 'branch -d can remove refs/heads/-dash' ' + git update-ref refs/heads/-dash HEAD^ && + git branch -d -- -dash && + test_must_fail git show-ref refs/heads/-dash +' + +test_expect_success 'branch -m can rename refs/heads/-dash' ' + git update-ref refs/heads/-dash HEAD^ && + git branch -m -- -dash dash && + test_must_fail git show-ref refs/heads/-dash && + git show-ref refs/heads/dash +' + test_done diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index 22f69a410b..af9b847761 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -6,6 +6,7 @@ test_description='split index mode tests' # We need total control of index splitting here sane_unset GIT_TEST_SPLIT_INDEX +sane_unset GIT_FSMONITOR_TEST test_expect_success 'enable split index' ' git config splitIndex.maxPercentChange 100 && diff --git a/t/t3310-notes-merge-manual-resolve.sh b/t/t3310-notes-merge-manual-resolve.sh index baef2d6924..9c1bf6eb3d 100755 --- a/t/t3310-notes-merge-manual-resolve.sh +++ b/t/t3310-notes-merge-manual-resolve.sh @@ -176,7 +176,7 @@ git rev-parse refs/notes/z > pre_merge_z test_expect_success 'merge z into m (== y) with default ("manual") resolver => Conflicting 3-way merge' ' git update-ref refs/notes/m refs/notes/y && git config core.notesRef refs/notes/m && - test_must_fail git notes merge z >output && + test_must_fail git notes merge z >output 2>&1 && # Output should point to where to resolve conflicts test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts @@ -379,7 +379,7 @@ git rev-parse refs/notes/z > pre_merge_z test_expect_success 'redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge' ' git update-ref refs/notes/m refs/notes/y && git config core.notesRef refs/notes/m && - test_must_fail git notes merge z >output && + test_must_fail git notes merge z >output 2>&1 && # Output should point to where to resolve conflicts test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts @@ -413,7 +413,7 @@ git rev-parse refs/notes/y > pre_merge_y git rev-parse refs/notes/z > pre_merge_z test_expect_success 'redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge' ' - test_must_fail git notes merge z >output && + test_must_fail git notes merge z >output 2>&1 && # Output should point to where to resolve conflicts test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts @@ -494,7 +494,7 @@ cp expect_log_y expect_log_m test_expect_success 'redo merge of z into m (== y) with default ("manual") resolver => Conflicting 3-way merge' ' git update-ref refs/notes/m refs/notes/y && - test_must_fail git notes merge z >output && + test_must_fail git notes merge z >output 2>&1 && # Output should point to where to resolve conflicts test_i18ngrep "\\.git/NOTES_MERGE_WORKTREE" output && # Inspect merge conflicts diff --git a/t/t3320-notes-merge-worktrees.sh b/t/t3320-notes-merge-worktrees.sh index b9c3bc2487..10bfc8b947 100755 --- a/t/t3320-notes-merge-worktrees.sh +++ b/t/t3320-notes-merge-worktrees.sh @@ -61,7 +61,7 @@ test_expect_success 'merge z into x while mid-merge on y succeeds' ' ( cd worktree2 && git config core.notesRef refs/notes/x && - test_must_fail git notes merge z 2>&1 >out && + test_must_fail git notes merge z >out 2>&1 && test_i18ngrep "Automatic notes merge failed" out && grep -v "A notes merge into refs/notes/x is already in-progress in" out ) && diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index f5fd15e559..8ac58d5ea5 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -255,4 +255,26 @@ test_expect_success 'rebase commit with an ancient timestamp' ' grep "author .* 34567 +0600$" actual ' +test_expect_success 'rebase with "From " line in commit message' ' + git checkout -b preserve-from master~1 && + cat >From_.msg <<EOF && +Somebody embedded an mbox in a commit message + +This is from so-and-so: + +From a@b Mon Sep 17 00:00:00 2001 +From: John Doe <nobody@example.com> +Date: Sat, 11 Nov 2017 00:00:00 +0000 +Subject: not this message + +something +EOF + >From_ && + git add From_ && + git commit -F From_.msg && + git rebase master && + git log -1 --pretty=format:%B >out && + test_cmp From_.msg out +' + test_done diff --git a/t/t3426-rebase-submodule.sh b/t/t3426-rebase-submodule.sh index ebf4f5e4b2..a2bba04ba9 100755 --- a/t/t3426-rebase-submodule.sh +++ b/t/t3426-rebase-submodule.sh @@ -40,4 +40,21 @@ git_rebase_interactive () { test_submodule_switch "git_rebase_interactive" +test_expect_success 'rebase interactive ignores modified submodules' ' + test_when_finished "rm -rf super sub" && + git init sub && + git -C sub commit --allow-empty -m "Initial commit" && + git init super && + git -C super submodule add ../sub && + git -C super config submodule.sub.ignore dirty && + >super/foo && + git -C super add foo && + git -C super commit -m "Initial commit" && + test_commit -C super a && + test_commit -C super b && + test_commit -C super/sub c && + set_fake_editor && + git -C super rebase -i HEAD^^ +' + test_done diff --git a/t/t3512-cherry-pick-submodule.sh b/t/t3512-cherry-pick-submodule.sh index 6863b7bb6f..ce48c4fcca 100755 --- a/t/t3512-cherry-pick-submodule.sh +++ b/t/t3512-cherry-pick-submodule.sh @@ -10,4 +10,40 @@ KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 test_submodule_switch "git cherry-pick" +test_expect_success 'unrelated submodule/file conflict is ignored' ' + test_create_repo sub && + + touch sub/file && + git -C sub add file && + git -C sub commit -m "add a file in a submodule" && + + test_create_repo a_repo && + ( + cd a_repo && + >a_file && + git add a_file && + git commit -m "add a file" && + + git branch test && + git checkout test && + + mkdir sub && + >sub/content && + git add sub/content && + git commit -m "add a regular folder with name sub" && + + echo "123" >a_file && + git add a_file && + git commit -m "modify a file" && + + git checkout master && + + git submodule add ../sub sub && + git submodule update sub && + git commit -m "add a submodule info folder with name sub" && + + git cherry-pick test + ) +' + test_done diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index 81c6059a2d..46f15169f5 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -688,7 +688,7 @@ test_expect_success 'checking out a commit after submodule removal needs manual git submodule update && git checkout -q HEAD^ && git checkout -q master 2>actual && - test_i18ngrep "^warning: unable to rmdir submod:" actual && + test_i18ngrep "^warning: unable to rmdir '\''submod'\'':" actual && git status -s submod >actual && echo "?? submod/" >expected && test_cmp expected actual && diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 3b1ac1971a..39c7f2ebd7 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -804,6 +804,99 @@ test_expect_success 'push -m shows right message' ' test_cmp expect actual ' +test_expect_success 'push -m also works without space' ' + >foo && + git add foo && + git stash push -m"unspaced test message" && + echo "stash@{0}: On master: unspaced test message" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'store -m foo shows right message' ' + git stash clear && + git reset --hard && + echo quux >bazzy && + git add bazzy && + STASH_ID=$(git stash create) && + git stash store -m "store m" $STASH_ID && + echo "stash@{0}: store m" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'store -mfoo shows right message' ' + git stash clear && + git reset --hard && + echo quux >bazzy && + git add bazzy && + STASH_ID=$(git stash create) && + git stash store -m"store mfoo" $STASH_ID && + echo "stash@{0}: store mfoo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'store --message=foo shows right message' ' + git stash clear && + git reset --hard && + echo quux >bazzy && + git add bazzy && + STASH_ID=$(git stash create) && + git stash store --message="store message=foo" $STASH_ID && + echo "stash@{0}: store message=foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'store --message foo shows right message' ' + git stash clear && + git reset --hard && + echo quux >bazzy && + git add bazzy && + STASH_ID=$(git stash create) && + git stash store --message "store message foo" $STASH_ID && + echo "stash@{0}: store message foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'push -mfoo uses right message' ' + >foo && + git add foo && + git stash push -m"test mfoo" && + echo "stash@{0}: On master: test mfoo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'push --message foo is synonym for -mfoo' ' + >foo && + git add foo && + git stash push --message "test message foo" && + echo "stash@{0}: On master: test message foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'push --message=foo is synonym for -mfoo' ' + >foo && + git add foo && + git stash push --message="test message=foo" && + echo "stash@{0}: On master: test message=foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + +test_expect_success 'push -m shows right message' ' + >foo && + git add foo && + git stash push -m "test m foo" && + echo "stash@{0}: On master: test m foo" >expect && + git stash list -1 >actual && + test_cmp expect actual +' + test_expect_success 'create stores correct message' ' >foo && git add foo && diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index 6c9a93b734..559a7541a8 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -106,6 +106,8 @@ test_expect_success 'another test, without options' ' git diff -w -b --ignore-space-at-eol >out && test_cmp expect out && + git diff -w --ignore-cr-at-eol >out && + test_cmp expect out && tr "Q_" "\015 " <<-\EOF >expect && diff --git a/x b/x @@ -128,6 +130,9 @@ test_expect_success 'another test, without options' ' git diff -b --ignore-space-at-eol >out && test_cmp expect out && + git diff -b --ignore-cr-at-eol >out && + test_cmp expect out && + tr "Q_" "\015 " <<-\EOF >expect && diff --git a/x b/x index d99af23..22d9f73 100644 @@ -145,6 +150,29 @@ test_expect_success 'another test, without options' ' CR at end EOF git diff --ignore-space-at-eol >out && + test_cmp expect out && + + git diff --ignore-space-at-eol --ignore-cr-at-eol >out && + test_cmp expect out && + + tr "Q_" "\015 " <<-\EOF >expect && + diff --git a/x b/x + index_d99af23..22d9f73 100644 + --- a/x + +++ b/x + @@ -1,6 +1,6 @@ + -whitespace at beginning + -whitespace change + -whitespace in the middle + -whitespace at end + +_ whitespace at beginning + +whitespace_ _change + +white space in the middle + +whitespace at end__ + unchanged line + CR at end + EOF + git diff --ignore-cr-at-eol >out && test_cmp expect out ' diff --git a/t/t4051-diff-function-context.sh b/t/t4051-diff-function-context.sh index 3e6b485ecb..2d76a971c4 100755 --- a/t/t4051-diff-function-context.sh +++ b/t/t4051-diff-function-context.sh @@ -85,6 +85,10 @@ test_expect_success 'setup' ' check_diff changed_hello 'changed function' +test_expect_success ' context includes comment' ' + grep "^ .*Hello comment" changed_hello.diff +' + test_expect_success ' context includes begin' ' grep "^ .*Begin of hello" changed_hello.diff ' diff --git a/t/t4051/hello.c b/t/t4051/hello.c index 63b1a1e4ef..73e767e178 100644 --- a/t/t4051/hello.c +++ b/t/t4051/hello.c @@ -1,4 +1,7 @@ +/* + * Hello comment. + */ static void hello(void) // Begin of hello { /* diff --git a/t/t4107-apply-ignore-whitespace.sh b/t/t4107-apply-ignore-whitespace.sh index 9e29b5262d..ac72eeaf27 100755 --- a/t/t4107-apply-ignore-whitespace.sh +++ b/t/t4107-apply-ignore-whitespace.sh @@ -178,4 +178,18 @@ test_expect_success 'patch5 fails (--no-ignore-whitespace)' ' test_must_fail git apply --no-ignore-whitespace patch5.patch ' +test_expect_success 'apply --ignore-space-change --inaccurate-eof' ' + echo 1 >file && + git apply --ignore-space-change --inaccurate-eof <<-\EOF && + diff --git a/file b/file + --- a/file + +++ b/file + @@ -1 +1 @@ + -1 + +2 + EOF + printf 2 >expect && + test_cmp expect file +' + test_done diff --git a/t/t4201-shortlog.sh b/t/t4201-shortlog.sh index 9df054bf05..da10478f59 100755 --- a/t/t4201-shortlog.sh +++ b/t/t4201-shortlog.sh @@ -9,6 +9,7 @@ test_description='git shortlog . ./test-lib.sh test_expect_success 'setup' ' + test_tick && echo 1 >a1 && git add a1 && tree=$(git write-tree) && @@ -59,7 +60,7 @@ fuzz() { file=$1 && sed " s/$_x40/OBJECT_NAME/g - s/$_x05/OBJID/g + s/$_x35/OBJID/g s/^ \{6\}[CTa].*/ SUBJECT/g s/^ \{8\}[^ ].*/ CONTINUATION/g " <"$file" >"$file.fuzzy" && @@ -81,7 +82,7 @@ test_expect_success 'pretty format' ' test_expect_success '--abbrev' ' sed s/SUBJECT/OBJID/ expect.template >expect && - git shortlog --format="%h" --abbrev=5 HEAD >log && + git shortlog --format="%h" --abbrev=35 HEAD >log && fuzz log >log.predictable && test_cmp expect log.predictable ' diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 8f155da7a5..25b1f8cc73 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -737,6 +737,107 @@ test_expect_success 'log.decorate configuration' ' ' +test_expect_success 'decorate-refs with glob' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b (octopus-b) + octopus-a (octopus-a) + reach + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs="heads/octopus*" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'decorate-refs without globs' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b + octopus-a + reach (tag: reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs="tags/reach" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'multiple decorate-refs' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b (octopus-b) + octopus-a (octopus-a) + reach (tag: reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs="heads/octopus*" \ + --decorate-refs="tags/reach" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'decorate-refs-exclude with glob' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (HEAD -> master) + Merge-tags-octopus-a-and-octopus-b + seventh (tag: seventh) + octopus-b (tag: octopus-b) + octopus-a (tag: octopus-a) + reach (tag: reach, reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs-exclude="heads/octopus*" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'decorate-refs-exclude without globs' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (HEAD -> master) + Merge-tags-octopus-a-and-octopus-b + seventh (tag: seventh) + octopus-b (tag: octopus-b, octopus-b) + octopus-a (tag: octopus-a, octopus-a) + reach (reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs-exclude="tags/reach" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'multiple decorate-refs-exclude' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (HEAD -> master) + Merge-tags-octopus-a-and-octopus-b + seventh (tag: seventh) + octopus-b (tag: octopus-b) + octopus-a (tag: octopus-a) + reach (reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs-exclude="heads/octopus*" \ + --decorate-refs-exclude="tags/reach" >actual && + test_cmp expect.decorate actual +' + +test_expect_success 'decorate-refs and decorate-refs-exclude' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (master) + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b + octopus-a + reach (reach) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs="heads/*" \ + --decorate-refs-exclude="heads/oc*" >actual && + test_cmp expect.decorate actual +' + test_expect_success 'log.decorate config parsing' ' git log --oneline --decorate=full >expect.full && git log --oneline --decorate=short >expect.short && diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 50e40abb11..0f895478f0 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -306,23 +306,21 @@ test_expect_success 'clone checking out a tag' ' test_cmp fetch.expected fetch.actual ' -setup_ssh_wrapper () { - test_expect_success 'setup ssh wrapper' ' - rm -f "$TRASH_DIRECTORY/ssh-wrapper$X" && - cp "$GIT_BUILD_DIR/t/helper/test-fake-ssh$X" \ - "$TRASH_DIRECTORY/ssh-wrapper$X" && - GIT_SSH="$TRASH_DIRECTORY/ssh-wrapper$X" && - export GIT_SSH && - export TRASH_DIRECTORY && - >"$TRASH_DIRECTORY"/ssh-output - ' -} +test_expect_success 'set up ssh wrapper' ' + cp "$GIT_BUILD_DIR/t/helper/test-fake-ssh$X" \ + "$TRASH_DIRECTORY/ssh$X" && + GIT_SSH="$TRASH_DIRECTORY/ssh$X" && + export GIT_SSH && + export TRASH_DIRECTORY && + >"$TRASH_DIRECTORY"/ssh-output +' copy_ssh_wrapper_as () { rm -f "${1%$X}$X" && - cp "$TRASH_DIRECTORY/ssh-wrapper$X" "${1%$X}$X" && + cp "$TRASH_DIRECTORY/ssh$X" "${1%$X}$X" && + test_when_finished "rm $(git rev-parse --sq-quote "${1%$X}$X")" && GIT_SSH="${1%$X}$X" && - export GIT_SSH + test_when_finished "GIT_SSH=\"\$TRASH_DIRECTORY/ssh\$X\"" } expect_ssh () { @@ -346,8 +344,6 @@ expect_ssh () { (cd "$TRASH_DIRECTORY" && test_cmp ssh-expect ssh-output) } -setup_ssh_wrapper - test_expect_success 'clone myhost:src uses ssh' ' git clone myhost:src ssh-clone && expect_ssh myhost src @@ -364,9 +360,52 @@ test_expect_success 'bracketed hostnames are still ssh' ' expect_ssh "-p 123" myhost src ' -test_expect_success 'uplink is not treated as putty' ' +test_expect_success 'OpenSSH variant passes -4' ' + git clone -4 "[myhost:123]:src" ssh-ipv4-clone && + expect_ssh "-4 -p 123" myhost src +' + +test_expect_success 'variant can be overridden' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/putty" && + git -c ssh.variant=putty clone -4 "[myhost:123]:src" ssh-putty-clone && + expect_ssh "-4 -P 123" myhost src +' + +test_expect_success 'variant=auto picks based on basename' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && + git -c ssh.variant=auto clone -4 "[myhost:123]:src" ssh-auto-clone && + expect_ssh "-4 -P 123" myhost src +' + +test_expect_success 'simple does not support -4/-6' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/simple" && + test_must_fail git clone -4 "myhost:src" ssh-4-clone-simple +' + +test_expect_success 'simple does not support port' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/simple" && + test_must_fail git clone "[myhost:123]:src" ssh-bracket-clone-simple +' + +test_expect_success 'uplink is treated as simple' ' copy_ssh_wrapper_as "$TRASH_DIRECTORY/uplink" && - git clone "[myhost:123]:src" ssh-bracket-clone-uplink && + test_must_fail git clone "[myhost:123]:src" ssh-bracket-clone-uplink && + git clone "myhost:src" ssh-clone-uplink && + expect_ssh myhost src +' + +test_expect_success 'OpenSSH-like uplink is treated as ssh' ' + write_script "$TRASH_DIRECTORY/uplink" <<-EOF && + if test "\$1" = "-G" + then + exit 0 + fi && + exec "\$TRASH_DIRECTORY/ssh$X" "\$@" + EOF + test_when_finished "rm -f \"\$TRASH_DIRECTORY/uplink\"" && + GIT_SSH="$TRASH_DIRECTORY/uplink" && + test_when_finished "GIT_SSH=\"\$TRASH_DIRECTORY/ssh\$X\"" && + git clone "[myhost:123]:src" ssh-bracket-clone-sshlike-uplink && expect_ssh "-p 123" myhost src ' @@ -418,12 +457,14 @@ test_expect_success 'ssh.variant overrides plink detection' ' ' test_expect_success 'GIT_SSH_VARIANT overrides plink detection to plink' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && GIT_SSH_VARIANT=plink \ git clone "[myhost:123]:src" ssh-bracket-clone-variant-3 && expect_ssh "-P 123" myhost src ' test_expect_success 'GIT_SSH_VARIANT overrides plink to tortoiseplink' ' + copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && GIT_SSH_VARIANT=tortoiseplink \ git clone "[myhost:123]:src" ssh-bracket-clone-variant-4 && expect_ssh "-batch -P 123" myhost src @@ -435,9 +476,6 @@ test_expect_success 'clean failure on broken quoting' ' git clone "[myhost:123]:src" sq-failure ' -# Reset the GIT_SSH environment variable for clone tests. -setup_ssh_wrapper - counter=0 # $1 url # $2 none|host diff --git a/t/t5603-clone-dirname.sh b/t/t5603-clone-dirname.sh index d5af758129..13b5e5eb9b 100755 --- a/t/t5603-clone-dirname.sh +++ b/t/t5603-clone-dirname.sh @@ -11,7 +11,9 @@ test_expect_success 'setup ssh wrapper' ' git upload-pack "$TRASH_DIRECTORY" EOF GIT_SSH="$TRASH_DIRECTORY/ssh-wrapper" && + GIT_SSH_VARIANT=ssh && export GIT_SSH && + export GIT_SSH_VARIANT && export TRASH_DIRECTORY ' diff --git a/t/t5700-protocol-v1.sh b/t/t5700-protocol-v1.sh new file mode 100755 index 0000000000..ba86a44eb1 --- /dev/null +++ b/t/t5700-protocol-v1.sh @@ -0,0 +1,294 @@ +#!/bin/sh + +test_description='test git wire-protocol transition' + +TEST_NO_CREATE_REPO=1 + +. ./test-lib.sh + +# Test protocol v1 with 'git://' transport +# +. "$TEST_DIRECTORY"/lib-git-daemon.sh +start_git_daemon --export-all --enable=receive-pack +daemon_parent=$GIT_DAEMON_DOCUMENT_ROOT_PATH/parent + +test_expect_success 'create repo to be served by git-daemon' ' + git init "$daemon_parent" && + test_commit -C "$daemon_parent" one +' + +test_expect_success 'clone with git:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -c protocol.version=1 \ + clone "$GIT_DAEMON_URL/parent" daemon_child 2>log && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "clone> .*\\\0\\\0version=1\\\0$" log && + # Server responded using protocol v1 + grep "clone< version 1" log +' + +test_expect_success 'fetch with git:// using protocol v1' ' + test_commit -C "$daemon_parent" two && + + GIT_TRACE_PACKET=1 git -C daemon_child -c protocol.version=1 \ + fetch 2>log && + + git -C daemon_child log -1 --format=%s origin/master >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "fetch> .*\\\0\\\0version=1\\\0$" log && + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'pull with git:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -C daemon_child -c protocol.version=1 \ + pull 2>log && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "fetch> .*\\\0\\\0version=1\\\0$" log && + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'push with git:// using protocol v1' ' + test_commit -C daemon_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET=1 git -C daemon_child -c protocol.version=1 \ + push origin HEAD:client_branch 2>log && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "push> .*\\\0\\\0version=1\\\0$" log && + # Server responded using protocol v1 + grep "push< version 1" log +' + +stop_git_daemon + +# Test protocol v1 with 'file://' transport +# +test_expect_success 'create repo to be served by file:// transport' ' + git init file_parent && + test_commit -C file_parent one +' + +test_expect_success 'clone with file:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -c protocol.version=1 \ + clone "file://$(pwd)/file_parent" file_child 2>log && + + git -C file_child log -1 --format=%s >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "clone< version 1" log +' + +test_expect_success 'fetch with file:// using protocol v1' ' + test_commit -C file_parent two && + + GIT_TRACE_PACKET=1 git -C file_child -c protocol.version=1 \ + fetch 2>log && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'pull with file:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -C file_child -c protocol.version=1 \ + pull 2>log && + + git -C file_child log -1 --format=%s >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'push with file:// using protocol v1' ' + test_commit -C file_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET=1 git -C file_child -c protocol.version=1 \ + push origin HEAD:client_branch 2>log && + + git -C file_child log -1 --format=%s >actual && + git -C file_parent log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "push< version 1" log +' + +# Test protocol v1 with 'ssh://' transport +# +test_expect_success 'setup ssh wrapper' ' + GIT_SSH="$GIT_BUILD_DIR/t/helper/test-fake-ssh" && + export GIT_SSH && + GIT_SSH_VARIANT=ssh && + export GIT_SSH_VARIANT && + export TRASH_DIRECTORY && + >"$TRASH_DIRECTORY"/ssh-output +' + +expect_ssh () { + test_when_finished '(cd "$TRASH_DIRECTORY" && rm -f ssh-expect && >ssh-output)' && + echo "ssh: -o SendEnv=GIT_PROTOCOL myhost $1 '$PWD/ssh_parent'" >"$TRASH_DIRECTORY/ssh-expect" && + (cd "$TRASH_DIRECTORY" && test_cmp ssh-expect ssh-output) +} + +test_expect_success 'create repo to be served by ssh:// transport' ' + git init ssh_parent && + test_commit -C ssh_parent one +' + +test_expect_success 'clone with ssh:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -c protocol.version=1 \ + clone "ssh://myhost:$(pwd)/ssh_parent" ssh_child 2>log && + expect_ssh git-upload-pack && + + git -C ssh_child log -1 --format=%s >actual && + git -C ssh_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "clone< version 1" log +' + +test_expect_success 'fetch with ssh:// using protocol v1' ' + test_commit -C ssh_parent two && + + GIT_TRACE_PACKET=1 git -C ssh_child -c protocol.version=1 \ + fetch 2>log && + expect_ssh git-upload-pack && + + git -C ssh_child log -1 --format=%s origin/master >actual && + git -C ssh_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'pull with ssh:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -C ssh_child -c protocol.version=1 \ + pull 2>log && + expect_ssh git-upload-pack && + + git -C ssh_child log -1 --format=%s >actual && + git -C ssh_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "fetch< version 1" log +' + +test_expect_success 'push with ssh:// using protocol v1' ' + test_commit -C ssh_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET=1 git -C ssh_child -c protocol.version=1 \ + push origin HEAD:client_branch 2>log && + expect_ssh git-receive-pack && + + git -C ssh_child log -1 --format=%s >actual && + git -C ssh_parent log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "push< version 1" log +' + +# Test protocol v1 with 'http://' transport +# +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'create repo to be served by http:// transport' ' + git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config http.receivepack true && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" one +' + +test_expect_success 'clone with http:// using protocol v1' ' + GIT_TRACE_PACKET=1 GIT_TRACE_CURL=1 git -c protocol.version=1 \ + clone "$HTTPD_URL/smart/http_parent" http_child 2>log && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v1 + grep "Git-Protocol: version=1" log && + # Server responded using protocol v1 + grep "git< version 1" log +' + +test_expect_success 'fetch with http:// using protocol v1' ' + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two && + + GIT_TRACE_PACKET=1 git -C http_child -c protocol.version=1 \ + fetch 2>log && + + git -C http_child log -1 --format=%s origin/master >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "git< version 1" log +' + +test_expect_success 'pull with http:// using protocol v1' ' + GIT_TRACE_PACKET=1 git -C http_child -c protocol.version=1 \ + pull 2>log && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "git< version 1" log +' + +test_expect_success 'push with http:// using protocol v1' ' + test_commit -C http_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET=1 git -C http_child -c protocol.version=1 \ + push origin HEAD:client_branch && #2>log && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Server responded using protocol v1 + grep "git< version 1" log +' + +stop_httpd + +test_done diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 3aa534933e..c128dfc579 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -766,4 +766,36 @@ test_expect_success 'Verify usage of %(symref:rstrip) atom' ' test_cmp expected actual ' +test_expect_success ':remotename and :remoteref' ' + git init remote-tests && + ( + cd remote-tests && + test_commit initial && + git remote add from fifth.coffee:blub && + git config branch.master.remote from && + git config branch.master.merge refs/heads/stable && + git remote add to southridge.audio:repo && + git config remote.to.push "refs/heads/*:refs/heads/pushed/*" && + git config branch.master.pushRemote to && + for pair in "%(upstream)=refs/remotes/from/stable" \ + "%(upstream:remotename)=from" \ + "%(upstream:remoteref)=refs/heads/stable" \ + "%(push)=refs/remotes/to/pushed/master" \ + "%(push:remotename)=to" \ + "%(push:remoteref)=refs/heads/pushed/master" + do + echo "${pair#*=}" >expect && + git for-each-ref --format="${pair%=*}" \ + refs/heads/master >actual && + test_cmp expect actual + done && + git branch push-simple && + git config branch.push-simple.pushRemote from && + actual="$(git for-each-ref \ + --format="%(push:remotename),%(push:remoteref)" \ + refs/heads/push-simple)" && + test from, = "$actual" + ) +' + test_done diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index f5929c46f3..6e5031f56f 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -452,7 +452,7 @@ test_expect_success 'checking out a commit before submodule moved needs manual u git mv sub sub2 && git commit -m "moved sub to sub2" && git checkout -q HEAD^ 2>actual && - test_i18ngrep "^warning: unable to rmdir sub2:" actual && + test_i18ngrep "^warning: unable to rmdir '\''sub2'\'':" actual && git status -s sub2 >actual && echo "?? sub2/" >expected && test_cmp expected actual && diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index 865168ec6a..f5f46a95b4 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -214,6 +214,44 @@ test_expect_success TTY 'git tag as alias respects pager.tag with -l' ' ! test -e paginated.out ' +test_expect_success TTY 'git branch defaults to paging' ' + rm -f paginated.out && + test_terminal git branch && + test -e paginated.out +' + +test_expect_success TTY 'git branch respects pager.branch' ' + rm -f paginated.out && + test_terminal git -c pager.branch=false branch && + ! test -e paginated.out +' + +test_expect_success TTY 'git branch respects --no-pager' ' + rm -f paginated.out && + test_terminal git --no-pager branch && + ! test -e paginated.out +' + +test_expect_success TTY 'git branch --edit-description ignores pager.branch' ' + rm -f paginated.out editor.used && + write_script editor <<-\EOF && + echo "New description" >"$1" + touch editor.used + EOF + EDITOR=./editor test_terminal git -c pager.branch branch --edit-description && + ! test -e paginated.out && + test -e editor.used +' + +test_expect_success TTY 'git branch --set-upstream-to ignores pager.branch' ' + rm -f paginated.out && + git branch other && + test_when_finished "git branch -D other" && + test_terminal git -c pager.branch branch --set-upstream-to=other && + test_when_finished "git branch --unset-upstream" && + ! test -e paginated.out +' + # A colored commit log will begin with an appropriate ANSI escape # for the first color; the text "commit" comes later. colorful() { diff --git a/t/t7519-status-fsmonitor.sh b/t/t7519-status-fsmonitor.sh new file mode 100755 index 0000000000..eb2d13bbcf --- /dev/null +++ b/t/t7519-status-fsmonitor.sh @@ -0,0 +1,317 @@ +#!/bin/sh + +test_description='git status with file system watcher' + +. ./test-lib.sh + +# +# To run the entire git test suite using fsmonitor: +# +# copy t/t7519/fsmonitor-all to a location in your path and then set +# GIT_FSMONITOR_TEST=fsmonitor-all and run your tests. +# + +# Note, after "git reset --hard HEAD" no extensions exist other than 'TREE' +# "git update-index --fsmonitor" can be used to get the extension written +# before testing the results. + +clean_repo () { + git reset --hard HEAD && + git clean -fd +} + +dirty_repo () { + : >untracked && + : >dir1/untracked && + : >dir2/untracked && + echo 1 >modified && + echo 2 >dir1/modified && + echo 3 >dir2/modified && + echo 4 >new && + echo 5 >dir1/new && + echo 6 >dir2/new +} + +write_integration_script () { + write_script .git/hooks/fsmonitor-test<<-\EOF + if test "$#" -ne 2 + then + echo "$0: exactly 2 arguments expected" + exit 2 + fi + if test "$1" != 1 + then + echo "Unsupported core.fsmonitor hook version." >&2 + exit 1 + fi + printf "untracked\0" + printf "dir1/untracked\0" + printf "dir2/untracked\0" + printf "modified\0" + printf "dir1/modified\0" + printf "dir2/modified\0" + printf "new\0" + printf "dir1/new\0" + printf "dir2/new\0" + EOF +} + +test_lazy_prereq UNTRACKED_CACHE ' + { git update-index --test-untracked-cache; ret=$?; } && + test $ret -ne 1 +' + +test_expect_success 'setup' ' + mkdir -p .git/hooks && + : >tracked && + : >modified && + mkdir dir1 && + : >dir1/tracked && + : >dir1/modified && + mkdir dir2 && + : >dir2/tracked && + : >dir2/modified && + git -c core.fsmonitor= add . && + git -c core.fsmonitor= commit -m initial && + git config core.fsmonitor .git/hooks/fsmonitor-test && + cat >.gitignore <<-\EOF + .gitignore + expect* + actual* + marker* + EOF +' + +# test that the fsmonitor extension is off by default +test_expect_success 'fsmonitor extension is off by default' ' + test-dump-fsmonitor >actual && + grep "^no fsmonitor" actual +' + +# test that "update-index --fsmonitor" adds the fsmonitor extension +test_expect_success 'update-index --fsmonitor" adds the fsmonitor extension' ' + git update-index --fsmonitor && + test-dump-fsmonitor >actual && + grep "^fsmonitor last update" actual +' + +# test that "update-index --no-fsmonitor" removes the fsmonitor extension +test_expect_success 'update-index --no-fsmonitor" removes the fsmonitor extension' ' + git update-index --no-fsmonitor && + test-dump-fsmonitor >actual && + grep "^no fsmonitor" actual +' + +cat >expect <<EOF && +h dir1/modified +H dir1/tracked +h dir2/modified +H dir2/tracked +h modified +H tracked +EOF + +# test that "update-index --fsmonitor-valid" sets the fsmonitor valid bit +test_expect_success 'update-index --fsmonitor-valid" sets the fsmonitor valid bit' ' + git update-index --fsmonitor && + git update-index --fsmonitor-valid dir1/modified && + git update-index --fsmonitor-valid dir2/modified && + git update-index --fsmonitor-valid modified && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +H dir1/tracked +H dir2/modified +H dir2/tracked +H modified +H tracked +EOF + +# test that "update-index --no-fsmonitor-valid" clears the fsmonitor valid bit +test_expect_success 'update-index --no-fsmonitor-valid" clears the fsmonitor valid bit' ' + git update-index --no-fsmonitor-valid dir1/modified && + git update-index --no-fsmonitor-valid dir2/modified && + git update-index --no-fsmonitor-valid modified && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +H dir1/tracked +H dir2/modified +H dir2/tracked +H modified +H tracked +EOF + +# test that all files returned by the script get flagged as invalid +test_expect_success 'all files returned by integration script get flagged as invalid' ' + write_integration_script && + dirty_repo && + git update-index --fsmonitor && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +h dir1/new +H dir1/tracked +H dir2/modified +h dir2/new +H dir2/tracked +H modified +h new +H tracked +EOF + +# test that newly added files are marked valid +test_expect_success 'newly added files are marked valid' ' + git add new && + git add dir1/new && + git add dir2/new && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +h dir1/new +h dir1/tracked +H dir2/modified +h dir2/new +h dir2/tracked +H modified +h new +h tracked +EOF + +# test that all unmodified files get marked valid +test_expect_success 'all unmodified files get marked valid' ' + # modified files result in update-index returning 1 + test_must_fail git update-index --refresh --force-write-index && + git ls-files -f >actual && + test_cmp expect actual +' + +cat >expect <<EOF && +H dir1/modified +h dir1/tracked +h dir2/modified +h dir2/tracked +h modified +h tracked +EOF + +# test that *only* files returned by the integration script get flagged as invalid +test_expect_success '*only* files returned by the integration script get flagged as invalid' ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "dir1/modified\0" + EOF + clean_repo && + git update-index --refresh --force-write-index && + echo 1 >modified && + echo 2 >dir1/modified && + echo 3 >dir2/modified && + test_must_fail git update-index --refresh --force-write-index && + git ls-files -f >actual && + test_cmp expect actual +' + +# Ensure commands that call refresh_index() to move the index back in time +# properly invalidate the fsmonitor cache +test_expect_success 'refresh_index() invalidates fsmonitor cache' ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + EOF + clean_repo && + dirty_repo && + git add . && + git commit -m "to reset" && + git reset HEAD~1 && + git status >actual && + git -c core.fsmonitor= status >expect && + test_i18ncmp expect actual +' + +# test fsmonitor with and without preloadIndex +preload_values="false true" +for preload_val in $preload_values +do + test_expect_success "setup preloadIndex to $preload_val" ' + git config core.preloadIndex $preload_val && + if test $preload_val = true + then + GIT_FORCE_PRELOAD_TEST=$preload_val; export GIT_FORCE_PRELOAD_TEST + else + unset GIT_FORCE_PRELOAD_TEST + fi + ' + + # test fsmonitor with and without the untracked cache (if available) + uc_values="false" + test_have_prereq UNTRACKED_CACHE && uc_values="false true" + for uc_val in $uc_values + do + test_expect_success "setup untracked cache to $uc_val" ' + git config core.untrackedcache $uc_val + ' + + # Status is well tested elsewhere so we'll just ensure that the results are + # the same when using core.fsmonitor. + test_expect_success 'compare status with and without fsmonitor' ' + write_integration_script && + clean_repo && + dirty_repo && + git add new && + git add dir1/new && + git add dir2/new && + git status >actual && + git -c core.fsmonitor= status >expect && + test_i18ncmp expect actual + ' + + # Make sure it's actually skipping the check for modified and untracked + # (if enabled) files unless it is told about them. + test_expect_success "status doesn't detect unreported modifications" ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + :>marker + EOF + clean_repo && + git status && + test_path_is_file marker && + dirty_repo && + rm -f marker && + git status >actual && + test_path_is_file marker && + test_i18ngrep ! "Changes not staged for commit:" actual && + if test $uc_val = true + then + test_i18ngrep ! "Untracked files:" actual + fi && + if test $uc_val = false + then + test_i18ngrep "Untracked files:" actual + fi && + rm -f marker + ' + done +done + +# test that splitting the index dosn't interfere +test_expect_success 'splitting the index results in the same state' ' + write_integration_script && + dirty_repo && + git update-index --fsmonitor && + git ls-files -f >expect && + test-dump-fsmonitor >&2 && echo && + git update-index --fsmonitor --split-index && + test-dump-fsmonitor >&2 && echo && + git ls-files -f >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t7519/fsmonitor-all b/t/t7519/fsmonitor-all new file mode 100755 index 0000000000..691bc94dc2 --- /dev/null +++ b/t/t7519/fsmonitor-all @@ -0,0 +1,24 @@ +#!/bin/sh +# +# An test hook script to integrate with git to test fsmonitor. +# +# The hook is passed a version (currently 1) and a time in nanoseconds +# formatted as a string and outputs to stdout all files that have been +# modified since the given time. Paths must be relative to the root of +# the working tree and separated by a single NUL. +# +#echo "$0 $*" >&2 + +if test "$#" -ne 2 +then + echo "$0: exactly 2 arguments expected" >&2 + exit 2 +fi + +if test "$1" != 1 +then + echo "Unsupported core.fsmonitor hook version." >&2 + exit 1 +fi + +echo "/" diff --git a/t/t7519/fsmonitor-none b/t/t7519/fsmonitor-none new file mode 100755 index 0000000000..ed9cf5a6a9 --- /dev/null +++ b/t/t7519/fsmonitor-none @@ -0,0 +1,22 @@ +#!/bin/sh +# +# An test hook script to integrate with git to test fsmonitor. +# +# The hook is passed a version (currently 1) and a time in nanoseconds +# formatted as a string and outputs to stdout all files that have been +# modified since the given time. Paths must be relative to the root of +# the working tree and separated by a single NUL. +# +#echo "$0 $*" >&2 + +if test "$#" -ne 2 +then + echo "$0: exactly 2 arguments expected" >&2 + exit 2 +fi + +if test "$1" != 1 +then + echo "Unsupported core.fsmonitor hook version." >&2 + exit 1 +fi diff --git a/t/t7519/fsmonitor-watchman b/t/t7519/fsmonitor-watchman new file mode 100755 index 0000000000..5514edcf68 --- /dev/null +++ b/t/t7519/fsmonitor-watchman @@ -0,0 +1,133 @@ +#!/usr/bin/perl + +use strict; +use warnings; +use IPC::Open2; + +# An example hook script to integrate Watchman +# (https://facebook.github.io/watchman/) with git to speed up detecting +# new and modified files. +# +# The hook is passed a version (currently 1) and a time in nanoseconds +# formatted as a string and outputs to stdout all files that have been +# modified since the given time. Paths must be relative to the root of +# the working tree and separated by a single NUL. +# +# To enable this hook, rename this file to "query-watchman" and set +# 'git config core.fsmonitor .git/hooks/query-watchman' +# +my ($version, $time) = @ARGV; +#print STDERR "$0 $version $time\n"; + +# Check the hook interface version + +if ($version == 1) { + # convert nanoseconds to seconds + $time = int $time / 1000000000; +} else { + die "Unsupported query-fsmonitor hook version '$version'.\n" . + "Falling back to scanning...\n"; +} + +my $git_work_tree; +if ($^O =~ 'msys' || $^O =~ 'cygwin') { + $git_work_tree = Win32::GetCwd(); + $git_work_tree =~ tr/\\/\//; +} else { + require Cwd; + $git_work_tree = Cwd::cwd(); +} + +my $retry = 1; + +launch_watchman(); + +sub launch_watchman { + + my $pid = open2(\*CHLD_OUT, \*CHLD_IN, 'watchman -j') + or die "open2() failed: $!\n" . + "Falling back to scanning...\n"; + + # In the query expression below we're asking for names of files that + # changed since $time but were not transient (ie created after + # $time but no longer exist). + # + # To accomplish this, we're using the "since" generator to use the + # recency index to select candidate nodes and "fields" to limit the + # output to file names only. Then we're using the "expression" term to + # further constrain the results. + # + # The category of transient files that we want to ignore will have a + # creation clock (cclock) newer than $time_t value and will also not + # currently exist. + + my $query = <<" END"; + ["query", "$git_work_tree", { + "since": $time, + "fields": ["name"], + "expression": ["not", ["allof", ["since", $time, "cclock"], ["not", "exists"]]] + }] + END + + open (my $fh, ">", ".git/watchman-query.json"); + print $fh $query; + close $fh; + + print CHLD_IN $query; + close CHLD_IN; + my $response = do {local $/; <CHLD_OUT>}; + + open ($fh, ">", ".git/watchman-response.json"); + print $fh $response; + close $fh; + + die "Watchman: command returned no output.\n" . + "Falling back to scanning...\n" if $response eq ""; + die "Watchman: command returned invalid output: $response\n" . + "Falling back to scanning...\n" unless $response =~ /^\{/; + + my $json_pkg; + eval { + require JSON::XS; + $json_pkg = "JSON::XS"; + 1; + } or do { + require JSON::PP; + $json_pkg = "JSON::PP"; + }; + + my $o = $json_pkg->new->utf8->decode($response); + + if ($retry > 0 and $o->{error} and $o->{error} =~ m/unable to resolve root .* directory (.*) is not watched/) { + print STDERR "Adding '$git_work_tree' to watchman's watch list.\n"; + $retry--; + qx/watchman watch "$git_work_tree"/; + die "Failed to make watchman watch '$git_work_tree'.\n" . + "Falling back to scanning...\n" if $? != 0; + + # Watchman will always return all files on the first query so + # return the fast "everything is dirty" flag to git and do the + # Watchman query just to get it over with now so we won't pay + # the cost in git to look up each individual file. + + open ($fh, ">", ".git/watchman-output.out"); + print "/\0"; + close $fh; + + print "/\0"; + eval { launch_watchman() }; + exit 0; + } + + die "Watchman: $o->{error}.\n" . + "Falling back to scanning...\n" if $o->{error}; + + open ($fh, ">", ".git/watchman-output.out"); + binmode $fh, ":utf8"; + print $fh @{$o->{files}}; + close $fh; + + binmode STDOUT, ":utf8"; + local $, = "\0"; + print @{$o->{files}}; +} diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 2a6679c2f5..1797f632a3 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -60,6 +60,18 @@ test_expect_success setup ' echo " line with leading space3" echo "line without leading space2" } >space && + cat >hello.ps1 <<-\EOF && + # No-op. + function dummy() {} + + # Say hello. + function hello() { + echo "Hello world." + } # hello + + # Still a no-op. + function dummy() {} + EOF git add . && test_tick && git commit -m initial @@ -766,18 +778,27 @@ test_expect_success 'grep -W shows no trailing empty lines' ' test_cmp expected actual ' -cat >expected <<EOF -hello.c= printf("Hello world.\n"); -hello.c: return 0; -hello.c- /* char ?? */ -EOF - test_expect_success 'grep -W with userdiff' ' test_when_finished "rm -f .gitattributes" && - git config diff.custom.xfuncname "(printf.*|})$" && - echo "hello.c diff=custom" >.gitattributes && - git grep -W return >actual && - test_cmp expected actual + git config diff.custom.xfuncname "^function .*$" && + echo "hello.ps1 diff=custom" >.gitattributes && + git grep -W echo >function-context-userdiff-actual +' + +test_expect_success ' includes preceding comment' ' + grep "# Say hello" function-context-userdiff-actual +' + +test_expect_success ' includes function line' ' + grep "=function hello" function-context-userdiff-actual +' + +test_expect_success ' includes matching line' ' + grep ": echo" function-context-userdiff-actual +' + +test_expect_success ' includes last line of the function' ' + grep "} # hello" function-context-userdiff-actual ' for threads in $(test_seq 0 10) @@ -1110,6 +1131,12 @@ test_expect_success PCRE 'grep -P pattern' ' test_cmp expected actual ' +test_expect_success LIBPCRE2 "grep -P with (*NO_JIT) doesn't error out" ' + git grep -P "(*NO_JIT)\p{Ps}.*?\p{Pe}" hello.c >actual && + test_cmp expected actual + +' + test_expect_success !PCRE 'grep -P pattern errors without PCRE' ' test_must_fail git grep -P "foo.*bar" ' diff --git a/t/t9114-git-svn-dcommit-merge.sh b/t/t9114-git-svn-dcommit-merge.sh index a3d388228a..50bca62def 100755 --- a/t/t9114-git-svn-dcommit-merge.sh +++ b/t/t9114-git-svn-dcommit-merge.sh @@ -27,9 +27,7 @@ cat << EOF # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# along with this program; if not, see <http://www.gnu.org/licenses/>. # EOF } diff --git a/t/test-lib.sh b/t/test-lib.sh index 9b61f16f7a..e7065df2bb 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -175,9 +175,10 @@ esac # Convenience # -# A regexp to match 5 and 40 hexdigits +# A regexp to match 5, 35 and 40 hexdigits _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' -_x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05" +_x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05" +_x40="$_x35$_x05" # Zero SHA-1 _z40=0000000000000000000000000000000000000000 @@ -193,7 +194,7 @@ LF=' # when case-folding filenames u200c=$(printf '\342\200\214') -export _x05 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB +export _x05 _x35 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB # Each test should start with something like this, after copyright notices: # @@ -1027,6 +1028,8 @@ test -z "$NO_PERL" && test_set_prereq PERL test -z "$NO_PTHREADS" && test_set_prereq PTHREADS test -z "$NO_PYTHON" && test_set_prereq PYTHON test -n "$USE_LIBPCRE1$USE_LIBPCRE2" && test_set_prereq PCRE +test -n "$USE_LIBPCRE1" && test_set_prereq LIBPCRE1 +test -n "$USE_LIBPCRE2" && test_set_prereq LIBPCRE2 test -z "$NO_GETTEXT" && test_set_prereq GETTEXT # Can we rely on git's output in the C locale? |