diff options
Diffstat (limited to 't')
| -rwxr-xr-x | t/t5616-partial-clone.sh | 19 | ||||
| -rwxr-xr-x | t/t6112-rev-list-filters-objects.sh | 194 |
2 files changed, 205 insertions, 8 deletions
diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh index 73cd95812f..fc634a56b2 100755 --- a/t/t5616-partial-clone.sh +++ b/t/t5616-partial-clone.sh @@ -208,6 +208,25 @@ test_expect_success 'use fsck before and after manually fetching a missing subtr test_cmp unique_types.expected unique_types.observed ' +test_expect_success 'implicitly construct combine: filter with repeated flags' ' + GIT_TRACE=$(pwd)/trace git clone --bare \ + --filter=blob:none --filter=tree:1 \ + "file://$(pwd)/srv.bare" pc2 && + grep "trace:.* git pack-objects .*--filter=combine:blob:none+tree:1" \ + trace && + git -C pc2 rev-list --objects --missing=allow-any HEAD >objects && + + # We should have gotten some root trees. + grep " $" objects && + # Should not have gotten any non-root trees or blobs. + ! grep " ." objects && + + xargs -n 1 git -C pc2 cat-file -t <objects >types && + sort -u types >unique_types.actual && + test_write_lines commit tree >unique_types.expected && + test_cmp unique_types.expected unique_types.actual +' + test_expect_success 'partial clone fetches blobs pointed to by refs even if normally filtered out' ' rm -rf src dst && git init src && diff --git a/t/t6112-rev-list-filters-objects.sh b/t/t6112-rev-list-filters-objects.sh index acd7f5ab80..de0e5a5d36 100755 --- a/t/t6112-rev-list-filters-objects.sh +++ b/t/t6112-rev-list-filters-objects.sh @@ -278,7 +278,19 @@ test_expect_success 'verify skipping tree iteration when not collecting omits' ' test_line_count = 2 actual && # Make sure no other trees were considered besides the root. - ! grep "Skipping contents of tree [^.]" filter_trace + ! grep "Skipping contents of tree [^.]" filter_trace && + + # Try this again with "combine:". If both sub-filters are skipping + # trees, the composite filter should also skip trees. This is not + # important unless the user does combine:tree:X+tree:Y or another filter + # besides "tree:" is implemented in the future which can skip trees. + GIT_TRACE=1 git -C r3 rev-list \ + --objects --filter=combine:tree:1+tree:3 HEAD 2>filter_trace && + + # Only skip the dir1/ tree, which is shared between the two commits. + grep "Skipping contents of tree " filter_trace >actual && + test_write_lines "Skipping contents of tree dir1/..." >expected && + test_cmp expected actual ' # Test tree:# filters. @@ -330,6 +342,148 @@ test_expect_success 'verify tree:3 includes everything expected' ' test_line_count = 10 actual ' +test_expect_success 'combine:... for a simple combination' ' + git -C r3 rev-list --objects --filter=combine:tree:2+blob:none HEAD \ + >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + + # There are also 2 commit objects + test_line_count = 5 actual && + + cp actual expected && + + # Try again using repeated --filter - this is equivalent to a manual + # combine with "combine:...+..." + git -C r3 rev-list --objects --filter=combine:tree:2 \ + --filter=blob:none HEAD >actual && + + test_cmp expected actual +' + +test_expect_success 'combine:... with URL encoding' ' + git -C r3 rev-list --objects \ + --filter=combine:tree%3a2+blob:%6Eon%65 HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + + # There are also 2 commit objects + test_line_count = 5 actual +' + +expect_invalid_filter_spec () { + spec="$1" && + err="$2" && + + test_must_fail git -C r3 rev-list --objects --filter="$spec" HEAD \ + >actual 2>actual_stderr && + test_must_be_empty actual && + test_i18ngrep "$err" actual_stderr +} + +test_expect_success 'combine:... while URL-encoding things that should not be' ' + expect_invalid_filter_spec combine%3Atree:2+blob:none \ + "invalid filter-spec" +' + +test_expect_success 'combine: with nothing after the :' ' + expect_invalid_filter_spec combine: "expected something after combine:" +' + +test_expect_success 'parse error in first sub-filter in combine:' ' + expect_invalid_filter_spec combine:tree:asdf+blob:none \ + "expected .tree:<depth>." +' + +test_expect_success 'combine:... with non-encoded reserved chars' ' + expect_invalid_filter_spec combine:tree:2+sparse:@xyz \ + "must escape char in sub-filter-spec: .@." && + expect_invalid_filter_spec combine:tree:2+sparse:\` \ + "must escape char in sub-filter-spec: .\`." && + expect_invalid_filter_spec combine:tree:2+sparse:~abc \ + "must escape char in sub-filter-spec: .\~." +' + +test_expect_success 'validate err msg for "combine:<valid-filter>+"' ' + expect_invalid_filter_spec combine:tree:2+ "expected .tree:<depth>." +' + +test_expect_success 'combine:... with edge-case hex digits: Ff Aa 0 9' ' + git -C r3 rev-list --objects --filter="combine:tree:2+bl%6Fb:n%6fne" \ + HEAD >actual && + test_line_count = 5 actual && + git -C r3 rev-list --objects --filter="combine:tree%3A2+blob%3anone" \ + HEAD >actual && + test_line_count = 5 actual && + git -C r3 rev-list --objects --filter="combine:tree:%30" HEAD >actual && + test_line_count = 2 actual && + git -C r3 rev-list --objects --filter="combine:tree:%39+blob:none" \ + HEAD >actual && + test_line_count = 5 actual +' + +test_expect_success 'add sparse pattern blobs whose paths have reserved chars' ' + cp r3/pattern r3/pattern1+renamed% && + cp r3/pattern "r3/p;at%ter+n" && + cp r3/pattern r3/^~pattern && + git -C r3 add pattern1+renamed% "p;at%ter+n" ^~pattern && + git -C r3 commit -m "add sparse pattern files with reserved chars" +' + +test_expect_success 'combine:... with more than two sub-filters' ' + git -C r3 rev-list --objects \ + --filter=combine:tree:3+blob:limit=40+sparse:oid=master:pattern \ + HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD~2 "" && + expect_has HEAD dir1 && + expect_has HEAD dir1/sparse1 && + expect_has HEAD dir1/sparse2 && + + # Should also have 3 commits + test_line_count = 9 actual && + + # Try again, this time making sure the last sub-filter is only + # URL-decoded once. + cp actual expect && + + git -C r3 rev-list --objects \ + --filter=combine:tree:3+blob:limit=40+sparse:oid=master:pattern1%2brenamed%25 \ + HEAD >actual && + test_cmp expect actual && + + # Use the same composite filter again, but with a pattern file name that + # requires encoding multiple characters, and use implicit filter + # combining. + test_when_finished "rm -f trace1" && + GIT_TRACE=$(pwd)/trace1 git -C r3 rev-list --objects \ + --filter=tree:3 --filter=blob:limit=40 \ + --filter=sparse:oid="master:p;at%ter+n" \ + HEAD >actual && + + test_cmp expect actual && + grep "Add to combine filter-spec: sparse:oid=master:p%3bat%25ter%2bn" \ + trace1 && + + # Repeat the above test, but this time, the characters to encode are in + # the LHS of the combined filter. + test_when_finished "rm -f trace2" && + GIT_TRACE=$(pwd)/trace2 git -C r3 rev-list --objects \ + --filter=sparse:oid=master:^~pattern \ + --filter=tree:3 --filter=blob:limit=40 \ + HEAD >actual && + + test_cmp expect actual && + grep "Add to combine filter-spec: sparse:oid=master:%5e%7epattern" \ + trace2 +' + # Test provisional omit collection logic with a repo that has objects appearing # at multiple depths - first deeper than the filter's threshold, then shallow. @@ -373,6 +527,37 @@ test_expect_success 'verify skipping tree iteration when collecting omits' ' test_cmp expect actual ' +test_expect_success 'setup r5' ' + git init r5 && + mkdir -p r5/subdir && + + echo 1 >r5/short-root && + echo 12345 >r5/long-root && + echo a >r5/subdir/short-subdir && + echo abcde >r5/subdir/long-subdir && + + git -C r5 add short-root long-root subdir && + git -C r5 commit -m "commit msg" +' + +test_expect_success 'verify collecting omits in combined: filter' ' + # Note that this test guards against the naive implementation of simply + # giving both filters the same "omits" set and expecting it to + # automatically merge them. + git -C r5 rev-list --objects --quiet --filter-print-omitted \ + --filter=combine:tree:2+blob:limit=3 HEAD >actual && + + # Expect 0 trees/commits, 3 blobs omitted (all blobs except short-root) + omitted_1=$(echo 12345 | git hash-object --stdin) && + omitted_2=$(echo a | git hash-object --stdin) && + omitted_3=$(echo abcde | git hash-object --stdin) && + + grep ~$omitted_1 actual && + grep ~$omitted_2 actual && + grep ~$omitted_3 actual && + test_line_count = 3 actual +' + # Test tree:<depth> where a tree is iterated to twice - once where a subentry is # too deep to be included, and again where the blob inside it is shallow enough # to be included. This makes sure we don't use LOFR_MARK_SEEN incorrectly (we @@ -441,11 +626,4 @@ test_expect_success 'expand blob limit in protocol' ' grep "blob:limit=1024" trace ' -test_expect_success 'expand tree depth limit in protocol' ' - GIT_TRACE_PACKET="$(pwd)/tree_trace" git -c protocol.version=2 clone \ - --filter=tree:0k "file://$(pwd)/r2" tree && - ! grep "tree:0k" tree_trace && - grep "tree:0" tree_trace -' - test_done |