diff options
Diffstat (limited to 't')
72 files changed, 2220 insertions, 430 deletions
diff --git a/t/helper/.gitignore b/t/helper/.gitignore index 758ed2e8fa..721650256e 100644 --- a/t/helper/.gitignore +++ b/t/helper/.gitignore @@ -16,16 +16,19 @@ /test-match-trees /test-mergesort /test-mktemp +/test-online-cpus /test-parse-options /test-path-utils /test-prio-queue /test-read-cache +/test-ref-store /test-regex /test-revision-walking /test-run-command /test-sha1 /test-sha1-array /test-sigchain +/test-strcmp-offset /test-string-list /test-submodule-config /test-subprocess diff --git a/t/helper/test-date.c b/t/helper/test-date.c index 506054bcd5..f414a3ac67 100644 --- a/t/helper/test-date.c +++ b/t/helper/test-date.c @@ -4,7 +4,9 @@ static const char *usage_msg = "\n" " test-date relative [time_t]...\n" " test-date show:<format> [time_t]...\n" " test-date parse [date]...\n" -" test-date approxidate [date]...\n"; +" test-date approxidate [date]...\n" +" test-date is64bit\n" +" test-date time_t-is64bit\n"; static void show_relative_dates(const char **argv, struct timeval *now) { @@ -25,14 +27,14 @@ static void show_dates(const char **argv, const char *format) parse_date_format(format, &mode); for (; *argv; argv++) { char *arg; - time_t t; + timestamp_t t; int tz; /* * Do not use our normal timestamp parsing here, as the point * is to test the formatting code in isolation. */ - t = strtol(*argv, &arg, 10); + t = parse_timestamp(*argv, &arg, 10); while (*arg == ' ') arg++; tz = atoi(arg); @@ -46,12 +48,12 @@ static void parse_dates(const char **argv, struct timeval *now) struct strbuf result = STRBUF_INIT; for (; *argv; argv++) { - unsigned long t; + timestamp_t t; int tz; strbuf_reset(&result); parse_date(*argv, &result); - if (sscanf(result.buf, "%lu %d", &t, &tz) == 2) + if (sscanf(result.buf, "%"PRItime" %d", &t, &tz) == 2) printf("%s -> %s\n", *argv, show_date(t, tz, DATE_MODE(ISO8601))); else @@ -63,7 +65,7 @@ static void parse_dates(const char **argv, struct timeval *now) static void parse_approxidate(const char **argv, struct timeval *now) { for (; *argv; argv++) { - time_t t; + timestamp_t t; t = approxidate_relative(*argv, now); printf("%s -> %s\n", *argv, show_date(t, 0, DATE_MODE(ISO8601))); } @@ -93,6 +95,10 @@ int cmd_main(int argc, const char **argv) parse_dates(argv+1, &now); else if (!strcmp(*argv, "approxidate")) parse_approxidate(argv+1, &now); + else if (!strcmp(*argv, "is64bit")) + return sizeof(timestamp_t) == 8 ? 0 : 1; + else if (!strcmp(*argv, "time_t-is64bit")) + return sizeof(time_t) == 8 ? 0 : 1; else usage(usage_msg); return 0; diff --git a/t/helper/test-online-cpus.c b/t/helper/test-online-cpus.c new file mode 100644 index 0000000000..06c09c6b88 --- /dev/null +++ b/t/helper/test-online-cpus.c @@ -0,0 +1,8 @@ +#include "git-compat-util.h" +#include "thread-utils.h" + +int cmd_main(int argc, const char **argv) +{ + printf("%d\n", online_cpus()); + return 0; +} diff --git a/t/helper/test-parse-options.c b/t/helper/test-parse-options.c index a01430c24b..75fe883aac 100644 --- a/t/helper/test-parse-options.c +++ b/t/helper/test-parse-options.c @@ -5,7 +5,7 @@ static int boolean = 0; static int integer = 0; static unsigned long magnitude = 0; -static unsigned long timestamp; +static timestamp_t timestamp; static int abbrev = 7; static int verbose = -1; /* unspecified */ static int dry_run = 0, quiet = 0; @@ -161,7 +161,7 @@ int cmd_main(int argc, const char **argv) show(&expect, &ret, "boolean: %d", boolean); show(&expect, &ret, "integer: %d", integer); show(&expect, &ret, "magnitude: %lu", magnitude); - show(&expect, &ret, "timestamp: %lu", timestamp); + show(&expect, &ret, "timestamp: %"PRItime, timestamp); show(&expect, &ret, "string: %s", string ? string : "(not set)"); show(&expect, &ret, "abbrev: %d", abbrev); show(&expect, &ret, "verbose: %d", verbose); diff --git a/t/helper/test-read-cache.c b/t/helper/test-read-cache.c index 2a7990efc3..48255eef31 100644 --- a/t/helper/test-read-cache.c +++ b/t/helper/test-read-cache.c @@ -5,6 +5,7 @@ int cmd_main(int argc, const char **argv) int i, cnt = 1; if (argc == 2) cnt = strtol(argv[1], NULL, 0); + setup_git_directory(); for (i = 0; i < cnt; i++) { read_cache(); discard_cache(); diff --git a/t/helper/test-ref-store.c b/t/helper/test-ref-store.c new file mode 100644 index 0000000000..fba85e7da5 --- /dev/null +++ b/t/helper/test-ref-store.c @@ -0,0 +1,295 @@ +#include "cache.h" +#include "refs.h" +#include "worktree.h" + +static const char *notnull(const char *arg, const char *name) +{ + if (!arg) + die("%s required", name); + return arg; +} + +static unsigned int arg_flags(const char *arg, const char *name) +{ + return atoi(notnull(arg, name)); +} + +static const char **get_store(const char **argv, struct ref_store **refs) +{ + const char *gitdir; + + if (!argv[0]) { + die("ref store required"); + } else if (!strcmp(argv[0], "main")) { + *refs = get_main_ref_store(); + } else if (skip_prefix(argv[0], "submodule:", &gitdir)) { + struct strbuf sb = STRBUF_INIT; + int ret; + + ret = strbuf_git_path_submodule(&sb, gitdir, "objects/"); + if (ret) + die("strbuf_git_path_submodule failed: %d", ret); + add_to_alternates_memory(sb.buf); + strbuf_release(&sb); + + *refs = get_submodule_ref_store(gitdir); + } else if (skip_prefix(argv[0], "worktree:", &gitdir)) { + struct worktree **p, **worktrees = get_worktrees(0); + + for (p = worktrees; *p; p++) { + struct worktree *wt = *p; + + if (!wt->id) { + /* special case for main worktree */ + if (!strcmp(gitdir, "main")) + break; + } else if (!strcmp(gitdir, wt->id)) + break; + } + if (!*p) + die("no such worktree: %s", gitdir); + + *refs = get_worktree_ref_store(*p); + } else + die("unknown backend %s", argv[0]); + + if (!*refs) + die("no ref store"); + + /* consume store-specific optional arguments if needed */ + + return argv + 1; +} + + +static int cmd_pack_refs(struct ref_store *refs, const char **argv) +{ + unsigned int flags = arg_flags(*argv++, "flags"); + + return refs_pack_refs(refs, flags); +} + +static int cmd_peel_ref(struct ref_store *refs, const char **argv) +{ + const char *refname = notnull(*argv++, "refname"); + unsigned char sha1[20]; + int ret; + + ret = refs_peel_ref(refs, refname, sha1); + if (!ret) + puts(sha1_to_hex(sha1)); + return ret; +} + +static int cmd_create_symref(struct ref_store *refs, const char **argv) +{ + const char *refname = notnull(*argv++, "refname"); + const char *target = notnull(*argv++, "target"); + const char *logmsg = *argv++; + + return refs_create_symref(refs, refname, target, logmsg); +} + +static int cmd_delete_refs(struct ref_store *refs, const char **argv) +{ + unsigned int flags = arg_flags(*argv++, "flags"); + struct string_list refnames = STRING_LIST_INIT_NODUP; + + while (*argv) + string_list_append(&refnames, *argv++); + + return refs_delete_refs(refs, &refnames, flags); +} + +static int cmd_rename_ref(struct ref_store *refs, const char **argv) +{ + const char *oldref = notnull(*argv++, "oldref"); + const char *newref = notnull(*argv++, "newref"); + const char *logmsg = *argv++; + + return refs_rename_ref(refs, oldref, newref, logmsg); +} + +static int each_ref(const char *refname, const struct object_id *oid, + int flags, void *cb_data) +{ + printf("%s %s 0x%x\n", oid_to_hex(oid), refname, flags); + return 0; +} + +static int cmd_for_each_ref(struct ref_store *refs, const char **argv) +{ + const char *prefix = notnull(*argv++, "prefix"); + + return refs_for_each_ref_in(refs, prefix, each_ref, NULL); +} + +static int cmd_resolve_ref(struct ref_store *refs, const char **argv) +{ + unsigned char sha1[20]; + const char *refname = notnull(*argv++, "refname"); + int resolve_flags = arg_flags(*argv++, "resolve-flags"); + int flags; + const char *ref; + + ref = refs_resolve_ref_unsafe(refs, refname, resolve_flags, + sha1, &flags); + printf("%s %s 0x%x\n", sha1_to_hex(sha1), ref, flags); + return ref ? 0 : 1; +} + +static int cmd_verify_ref(struct ref_store *refs, const char **argv) +{ + const char *refname = notnull(*argv++, "refname"); + struct strbuf err = STRBUF_INIT; + int ret; + + ret = refs_verify_refname_available(refs, refname, NULL, NULL, &err); + if (err.len) + puts(err.buf); + return ret; +} + +static int cmd_for_each_reflog(struct ref_store *refs, const char **argv) +{ + return refs_for_each_reflog(refs, each_ref, NULL); +} + +static int each_reflog(struct object_id *old_oid, struct object_id *new_oid, + const char *committer, timestamp_t timestamp, + int tz, const char *msg, void *cb_data) +{ + printf("%s %s %s %"PRItime" %d %s\n", + oid_to_hex(old_oid), oid_to_hex(new_oid), + committer, timestamp, tz, msg); + return 0; +} + +static int cmd_for_each_reflog_ent(struct ref_store *refs, const char **argv) +{ + const char *refname = notnull(*argv++, "refname"); + + return refs_for_each_reflog_ent(refs, refname, each_reflog, refs); +} + +static int cmd_for_each_reflog_ent_reverse(struct ref_store *refs, const char **argv) +{ + const char *refname = notnull(*argv++, "refname"); + + return refs_for_each_reflog_ent_reverse(refs, refname, each_reflog, refs); +} + +static int cmd_reflog_exists(struct ref_store *refs, const char **argv) +{ + const char *refname = notnull(*argv++, "refname"); + + return !refs_reflog_exists(refs, refname); +} + +static int cmd_create_reflog(struct ref_store *refs, const char **argv) +{ + const char *refname = notnull(*argv++, "refname"); + int force_create = arg_flags(*argv++, "force-create"); + struct strbuf err = STRBUF_INIT; + int ret; + + ret = refs_create_reflog(refs, refname, force_create, &err); + if (err.len) + puts(err.buf); + return ret; +} + +static int cmd_delete_reflog(struct ref_store *refs, const char **argv) +{ + const char *refname = notnull(*argv++, "refname"); + + return refs_delete_reflog(refs, refname); +} + +static int cmd_reflog_expire(struct ref_store *refs, const char **argv) +{ + die("not supported yet"); +} + +static int cmd_delete_ref(struct ref_store *refs, const char **argv) +{ + const char *msg = notnull(*argv++, "msg"); + const char *refname = notnull(*argv++, "refname"); + const char *sha1_buf = notnull(*argv++, "old-sha1"); + unsigned int flags = arg_flags(*argv++, "flags"); + unsigned char old_sha1[20]; + + if (get_sha1_hex(sha1_buf, old_sha1)) + die("not sha-1"); + + return refs_delete_ref(refs, msg, refname, old_sha1, flags); +} + +static int cmd_update_ref(struct ref_store *refs, const char **argv) +{ + const char *msg = notnull(*argv++, "msg"); + const char *refname = notnull(*argv++, "refname"); + const char *new_sha1_buf = notnull(*argv++, "old-sha1"); + const char *old_sha1_buf = notnull(*argv++, "old-sha1"); + unsigned int flags = arg_flags(*argv++, "flags"); + unsigned char old_sha1[20]; + unsigned char new_sha1[20]; + + if (get_sha1_hex(old_sha1_buf, old_sha1) || + get_sha1_hex(new_sha1_buf, new_sha1)) + die("not sha-1"); + + return refs_update_ref(refs, msg, refname, + new_sha1, old_sha1, + flags, UPDATE_REFS_DIE_ON_ERR); +} + +struct command { + const char *name; + int (*func)(struct ref_store *refs, const char **argv); +}; + +static struct command commands[] = { + { "pack-refs", cmd_pack_refs }, + { "peel-ref", cmd_peel_ref }, + { "create-symref", cmd_create_symref }, + { "delete-refs", cmd_delete_refs }, + { "rename-ref", cmd_rename_ref }, + { "for-each-ref", cmd_for_each_ref }, + { "resolve-ref", cmd_resolve_ref }, + { "verify-ref", cmd_verify_ref }, + { "for-each-reflog", cmd_for_each_reflog }, + { "for-each-reflog-ent", cmd_for_each_reflog_ent }, + { "for-each-reflog-ent-reverse", cmd_for_each_reflog_ent_reverse }, + { "reflog-exists", cmd_reflog_exists }, + { "create-reflog", cmd_create_reflog }, + { "delete-reflog", cmd_delete_reflog }, + { "reflog-expire", cmd_reflog_expire }, + /* + * backend transaction functions can't be tested separately + */ + { "delete-ref", cmd_delete_ref }, + { "update-ref", cmd_update_ref }, + { NULL, NULL } +}; + +int cmd_main(int argc, const char **argv) +{ + struct ref_store *refs; + const char *func; + struct command *cmd; + + setup_git_directory(); + + argv = get_store(argv + 1, &refs); + + func = *argv++; + if (!func) + die("ref function required"); + for (cmd = commands; cmd->name; cmd++) { + if (!strcmp(func, cmd->name)) + return cmd->func(refs, argv); + } + die("unknown function %s", func); + return 0; +} diff --git a/t/helper/test-sha1-array.c b/t/helper/test-sha1-array.c index f7a53c4ad6..edfd52d82a 100644 --- a/t/helper/test-sha1-array.c +++ b/t/helper/test-sha1-array.c @@ -1,33 +1,33 @@ #include "cache.h" #include "sha1-array.h" -static int print_sha1(const unsigned char sha1[20], void *data) +static int print_oid(const struct object_id *oid, void *data) { - puts(sha1_to_hex(sha1)); + puts(oid_to_hex(oid)); return 0; } int cmd_main(int argc, const char **argv) { - struct sha1_array array = SHA1_ARRAY_INIT; + struct oid_array array = OID_ARRAY_INIT; struct strbuf line = STRBUF_INIT; while (strbuf_getline(&line, stdin) != EOF) { const char *arg; - unsigned char sha1[20]; + struct object_id oid; if (skip_prefix(line.buf, "append ", &arg)) { - if (get_sha1_hex(arg, sha1)) + if (get_oid_hex(arg, &oid)) die("not a hexadecimal SHA1: %s", arg); - sha1_array_append(&array, sha1); + oid_array_append(&array, &oid); } else if (skip_prefix(line.buf, "lookup ", &arg)) { - if (get_sha1_hex(arg, sha1)) + if (get_oid_hex(arg, &oid)) die("not a hexadecimal SHA1: %s", arg); - printf("%d\n", sha1_array_lookup(&array, sha1)); + printf("%d\n", oid_array_lookup(&array, &oid)); } else if (!strcmp(line.buf, "clear")) - sha1_array_clear(&array); + oid_array_clear(&array); else if (!strcmp(line.buf, "for_each_unique")) - sha1_array_for_each_unique(&array, print_sha1, NULL); + oid_array_for_each_unique(&array, print_oid, NULL); else die("unknown command: %s", line.buf); } diff --git a/t/helper/test-strcmp-offset.c b/t/helper/test-strcmp-offset.c new file mode 100644 index 0000000000..4a45a54e92 --- /dev/null +++ b/t/helper/test-strcmp-offset.c @@ -0,0 +1,22 @@ +#include "cache.h" + +int cmd_main(int argc, const char **argv) +{ + int result; + size_t offset; + + if (!argv[1] || !argv[2]) + die("usage: %s <string1> <string2>", argv[0]); + + result = strcmp_offset(argv[1], argv[2], &offset); + + /* + * Because differnt CRTs behave differently, only rely on signs + * of the result values. + */ + result = (result < 0 ? -1 : + result > 0 ? 1 : + 0); + printf("%d %"PRIuMAX"\n", result, (uintmax_t)offset); + return 0; +} diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index 924b19dab4..1dbc85b214 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -88,6 +88,7 @@ for my $t (@tests) { sub read_descr { my $name = shift; open my $fh, "<", $name or return "<error reading description>"; + binmode $fh, ":utf8" or die "PANIC on binmode: $!"; my $line = <$fh>; close $fh or die "cannot close $name"; chomp $line; @@ -147,6 +148,8 @@ for my $t (@subtests) { my $totalwidth = 3*@dirs+$descrlen; $totalwidth += $_ for (@colwidth); +binmode STDOUT, ":utf8" or die "PANIC on binmode: $!"; + printf "%-${descrlen}s", "Test"; for my $i (0..$#dirs) { my $d = $dirs[$i]; diff --git a/t/perf/p0000-perf-lib-sanity.sh b/t/perf/p0000-perf-lib-sanity.sh index cf8e1efce7..002c21e52a 100755 --- a/t/perf/p0000-perf-lib-sanity.sh +++ b/t/perf/p0000-perf-lib-sanity.sh @@ -33,6 +33,8 @@ test_perf 'export a weird var' ' test_export bar ' +test_perf 'éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś' 'true' + test_expect_success 'test_export works with weird vars' ' echo "$bar" && test "$bar" = "weird # variable" diff --git a/t/perf/p0004-lazy-init-name-hash.sh b/t/perf/p0004-lazy-init-name-hash.sh index 5afa8c8df3..5afa8c8df3 100644..100755 --- a/t/perf/p0004-lazy-init-name-hash.sh +++ b/t/perf/p0004-lazy-init-name-hash.sh diff --git a/t/perf/p0005-status.sh b/t/perf/p0005-status.sh new file mode 100755 index 0000000000..0b0aa9858f --- /dev/null +++ b/t/perf/p0005-status.sh @@ -0,0 +1,49 @@ +#!/bin/sh +# +# This test measures the performance of various read-tree +# and status operations. It is primarily interested in +# the algorithmic costs of index operations and recursive +# tree traversal -- and NOT disk I/O on thousands of files. + +test_description="Tests performance of read-tree" + +. ./perf-lib.sh + +test_perf_default_repo + +# If the test repo was generated by ./repos/many-files.sh +# then we know something about the data shape and branches, +# so we can isolate testing to the ballast-related commits +# and setup sparse-checkout so we don't have to populate +# the ballast files and directories. +# +# Otherwise, we make some general assumptions about the +# repo and consider the entire history of the current +# branch to be the ballast. + +test_expect_success "setup repo" ' + if git rev-parse --verify refs/heads/p0006-ballast^{commit} + then + echo Assuming synthetic repo from many-files.sh + git branch br_base master + git branch br_ballast p0006-ballast + git config --local core.sparsecheckout 1 + cat >.git/info/sparse-checkout <<-EOF + /* + !ballast/* + EOF + else + echo Assuming non-synthetic repo... + git branch br_base $(git rev-list HEAD | tail -n 1) + git branch br_ballast HEAD + fi && + git checkout -q br_ballast && + nr_files=$(git ls-files | wc -l) +' + +test_perf "read-tree status br_ballast ($nr_files)" ' + git read-tree HEAD && + git status +' + +test_done diff --git a/t/perf/p0006-read-tree-checkout.sh b/t/perf/p0006-read-tree-checkout.sh new file mode 100755 index 0000000000..78cc23fe2f --- /dev/null +++ b/t/perf/p0006-read-tree-checkout.sh @@ -0,0 +1,67 @@ +#!/bin/sh +# +# This test measures the performance of various read-tree +# and checkout operations. It is primarily interested in +# the algorithmic costs of index operations and recursive +# tree traversal -- and NOT disk I/O on thousands of files. + +test_description="Tests performance of read-tree" + +. ./perf-lib.sh + +test_perf_default_repo + +# If the test repo was generated by ./repos/many-files.sh +# then we know something about the data shape and branches, +# so we can isolate testing to the ballast-related commits +# and setup sparse-checkout so we don't have to populate +# the ballast files and directories. +# +# Otherwise, we make some general assumptions about the +# repo and consider the entire history of the current +# branch to be the ballast. + +test_expect_success "setup repo" ' + if git rev-parse --verify refs/heads/p0006-ballast^{commit} + then + echo Assuming synthetic repo from many-files.sh + git branch br_base master + git branch br_ballast p0006-ballast^ + git branch br_ballast_alias p0006-ballast^ + git branch br_ballast_plus_1 p0006-ballast + git config --local core.sparsecheckout 1 + cat >.git/info/sparse-checkout <<-EOF + /* + !ballast/* + EOF + else + echo Assuming non-synthetic repo... + git branch br_base $(git rev-list HEAD | tail -n 1) + git branch br_ballast HEAD^ || error "no ancestor commit from current head" + git branch br_ballast_alias HEAD^ + git branch br_ballast_plus_1 HEAD + fi && + git checkout -q br_ballast && + nr_files=$(git ls-files | wc -l) +' + +test_perf "read-tree br_base br_ballast ($nr_files)" ' + git read-tree -m br_base br_ballast -n +' + +test_perf "switch between br_base br_ballast ($nr_files)" ' + git checkout -q br_base && + git checkout -q br_ballast +' + +test_perf "switch between br_ballast br_ballast_plus_1 ($nr_files)" ' + git checkout -q br_ballast_plus_1 && + git checkout -q br_ballast +' + +test_perf "switch between aliases ($nr_files)" ' + git checkout -q br_ballast_alias && + git checkout -q br_ballast +' + +test_done diff --git a/t/perf/repos/.gitignore b/t/perf/repos/.gitignore new file mode 100644 index 0000000000..72e3dc3e19 --- /dev/null +++ b/t/perf/repos/.gitignore @@ -0,0 +1 @@ +gen-*/ diff --git a/t/perf/repos/inflate-repo.sh b/t/perf/repos/inflate-repo.sh new file mode 100755 index 0000000000..fcfc992b5b --- /dev/null +++ b/t/perf/repos/inflate-repo.sh @@ -0,0 +1,85 @@ +#!/bin/sh +# Inflate the size of an EXISTING repo. +# +# This script should be run inside the worktree of a TEST repo. +# It will use the contents of the current HEAD to generate a +# commit containing copies of the current worktree such that the +# total size of the commit has at least <target_size> files. +# +# Usage: [-t target_size] [-b branch_name] + +set -e + +target_size=10000 +branch_name=p0006-ballast +ballast=ballast + +while test "$#" -ne 0 +do + case "$1" in + -b) + shift; + test "$#" -ne 0 || { echo 'error: -b requires an argument' >&2; exit 1; } + branch_name=$1; + shift ;; + -t) + shift; + test "$#" -ne 0 || { echo 'error: -t requires an argument' >&2; exit 1; } + target_size=$1; + shift ;; + *) + echo "error: unknown option '$1'" >&2; exit 1 ;; + esac +done + +git ls-tree -r HEAD >GEN_src_list +nr_src_files=$(cat GEN_src_list | wc -l) + +src_branch=$(git symbolic-ref --short HEAD) + +echo "Branch $src_branch initially has $nr_src_files files." + +if test $target_size -le $nr_src_files +then + echo "Repository already exceeds target size $target_size." + rm GEN_src_list + exit 1 +fi + +# Create well-known branch and add 1 file change to start +# if off before the ballast. +git checkout -b $branch_name HEAD +echo "$target_size" > inflate-repo.params +git add inflate-repo.params +git commit -q -m params + +# Create ballast for in our branch. +copy=1 +nr_files=$nr_src_files +while test $nr_files -lt $target_size +do + sed -e "s| | $ballast/$copy/|" <GEN_src_list | + git update-index --index-info + + nr_files=$(expr $nr_files + $nr_src_files) + copy=$(expr $copy + 1) +done +rm GEN_src_list +git commit -q -m "ballast" + +# Modify 1 file and commit. +echo "$target_size" >> inflate-repo.params +git add inflate-repo.params +git commit -q -m "ballast plus 1" + +nr_files=$(git ls-files | wc -l) + +# Checkout master to put repo in canonical state (because +# the perf test may need to clone and enable sparse-checkout +# before attempting to checkout a commit with the ballast +# (because it may contain 100K directories and 1M files)). +git checkout $src_branch + +echo "Repository inflated. Branch $branch_name has $nr_files files." + +exit 0 diff --git a/t/perf/repos/many-files.sh b/t/perf/repos/many-files.sh new file mode 100755 index 0000000000..28720e4e10 --- /dev/null +++ b/t/perf/repos/many-files.sh @@ -0,0 +1,110 @@ +#!/bin/sh +# Generate test data repository using the given parameters. +# When omitted, we create "gen-many-files-d-w-f.git". +# +# Usage: [-r repo] [-d depth] [-w width] [-f files] +# +# -r repo: path to the new repo to be generated +# -d depth: the depth of sub-directories +# -w width: the number of sub-directories at each level +# -f files: the number of files created in each directory +# +# Note that all files will have the same SHA-1 and each +# directory at a level will have the same SHA-1, so we +# will potentially have a large index, but not a large +# ODB. +# +# Ballast will be created under "ballast/". + +EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 + +set -e + +# (5, 10, 9) will create 999,999 ballast files. +# (4, 10, 9) will create 99,999 ballast files. +depth=5 +width=10 +files=9 + +while test "$#" -ne 0 +do + case "$1" in + -r) + shift; + test "$#" -ne 0 || { echo 'error: -r requires an argument' >&2; exit 1; } + repo=$1; + shift ;; + -d) + shift; + test "$#" -ne 0 || { echo 'error: -d requires an argument' >&2; exit 1; } + depth=$1; + shift ;; + -w) + shift; + test "$#" -ne 0 || { echo 'error: -w requires an argument' >&2; exit 1; } + width=$1; + shift ;; + -f) + shift; + test "$#" -ne 0 || { echo 'error: -f requires an argument' >&2; exit 1; } + files=$1; + shift ;; + *) + echo "error: unknown option '$1'" >&2; exit 1 ;; + esac +done + +# Inflate the index with thousands of empty files. +# usage: dir depth width files +fill_index() { + awk -v arg_dir=$1 -v arg_depth=$2 -v arg_width=$3 -v arg_files=$4 ' + function make_paths(dir, depth, width, files, f, w) { + for (f = 1; f <= files; f++) { + print dir "/file" f + } + if (depth > 0) { + for (w = 1; w <= width; w++) { + make_paths(dir "/dir" w, depth - 1, width, files) + } + } + } + END { make_paths(arg_dir, arg_depth, arg_width, arg_files) } + ' </dev/null | + sed "s/^/100644 $EMPTY_BLOB /" | + git update-index --index-info + return 0 +} + +[ -z "$repo" ] && repo=gen-many-files-$depth.$width.$files.git + +mkdir $repo +cd $repo +git init . + +# Create an initial commit just to define master. +touch many-files.empty +echo "$depth $width $files" >many-files.params +git add many-files.* +git commit -q -m params + +# Create ballast for p0006 based upon the given params and +# inflate the index with thousands of empty files and commit. +git checkout -b p0006-ballast +fill_index "ballast" $depth $width $files +git commit -q -m "ballast" + +nr_files=$(git ls-files | wc -l) + +# Modify 1 file and commit. +echo "$depth $width $files" >>many-files.params +git add many-files.params +git commit -q -m "ballast plus 1" + +# Checkout master to put repo in canonical state (because +# the perf test may need to clone and enable sparse-checkout +# before attempting to checkout a commit with the ballast +# (because it may contain 100K directories and 1M files)). +git checkout master + +echo "Repository "$repo" ($depth, $width, $files) created. Ballast $nr_files." +exit 0 diff --git a/t/t0006-date.sh b/t/t0006-date.sh index c0c910867d..42d4ea61ef 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -53,8 +53,8 @@ check_show unix-local "$TIME" '1466000000' # arbitrary time absurdly far in the future FUTURE="5758122296 -0400" -check_show iso "$FUTURE" "2152-06-19 18:24:56 -0400" LONG_IS_64BIT -check_show iso-local "$FUTURE" "2152-06-19 22:24:56 +0000" LONG_IS_64BIT +check_show iso "$FUTURE" "2152-06-19 18:24:56 -0400" TIME_IS_64BIT,TIME_T_IS_64BIT +check_show iso-local "$FUTURE" "2152-06-19 22:24:56 +0000" TIME_IS_64BIT,TIME_T_IS_64BIT check_parse() { echo "$1 -> $2" >expect diff --git a/t/t0025-crlf-auto.sh b/t/t0025-crlf-auto.sh deleted file mode 100755 index d0bee08b2e..0000000000 --- a/t/t0025-crlf-auto.sh +++ /dev/null @@ -1,155 +0,0 @@ -#!/bin/sh - -test_description='CRLF conversion' - -. ./test-lib.sh - -has_cr() { - tr '\015' Q <"$1" | grep Q >/dev/null -} - -test_expect_success setup ' - - git config core.autocrlf false && - - for w in Hello world how are you; do echo $w; done >LFonly && - for w in I am very very fine thank you; do echo ${w}Q; done | q_to_cr >CRLFonly && - for w in Oh here is a QNUL byte how alarming; do echo ${w}; done | q_to_nul >LFwithNUL && - git add . && - - git commit -m initial && - - LFonly=$(git rev-parse HEAD:LFonly) && - CRLFonly=$(git rev-parse HEAD:CRLFonly) && - LFwithNUL=$(git rev-parse HEAD:LFwithNUL) && - - echo happy. -' - -test_expect_success 'default settings cause no changes' ' - - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - git read-tree --reset -u HEAD && - - ! has_cr LFonly && - has_cr CRLFonly && - LFonlydiff=$(git diff LFonly) && - CRLFonlydiff=$(git diff CRLFonly) && - LFwithNULdiff=$(git diff LFwithNUL) && - test -z "$LFonlydiff" -a -z "$CRLFonlydiff" -a -z "$LFwithNULdiff" -' - -test_expect_success 'crlf=true causes a CRLF file to be normalized' ' - - # Backwards compatibility check - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - echo "CRLFonly crlf" > .gitattributes && - git read-tree --reset -u HEAD && - - # Note, "normalized" means that git will normalize it if added - has_cr CRLFonly && - CRLFonlydiff=$(git diff CRLFonly) && - test -n "$CRLFonlydiff" -' - -test_expect_success 'text=true causes a CRLF file to be normalized' ' - - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - echo "CRLFonly text" > .gitattributes && - git read-tree --reset -u HEAD && - - # Note, "normalized" means that git will normalize it if added - has_cr CRLFonly && - CRLFonlydiff=$(git diff CRLFonly) && - test -n "$CRLFonlydiff" -' - -test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=false' ' - - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - git config core.autocrlf false && - echo "LFonly eol=crlf" > .gitattributes && - git read-tree --reset -u HEAD && - - has_cr LFonly && - LFonlydiff=$(git diff LFonly) && - test -z "$LFonlydiff" -' - -test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=input' ' - - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - git config core.autocrlf input && - echo "LFonly eol=crlf" > .gitattributes && - git read-tree --reset -u HEAD && - - has_cr LFonly && - LFonlydiff=$(git diff LFonly) && - test -z "$LFonlydiff" -' - -test_expect_success 'eol=lf gives a normalized file LFs with autocrlf=true' ' - - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - git config core.autocrlf true && - echo "LFonly eol=lf" > .gitattributes && - git read-tree --reset -u HEAD && - - ! has_cr LFonly && - LFonlydiff=$(git diff LFonly) && - test -z "$LFonlydiff" -' - -test_expect_success 'autocrlf=true does not normalize CRLF files' ' - - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - git config core.autocrlf true && - git read-tree --reset -u HEAD && - - has_cr LFonly && - has_cr CRLFonly && - LFonlydiff=$(git diff LFonly) && - CRLFonlydiff=$(git diff CRLFonly) && - LFwithNULdiff=$(git diff LFwithNUL) && - test -z "$LFonlydiff" -a -z "$CRLFonlydiff" -a -z "$LFwithNULdiff" -' - -test_expect_success 'text=auto, autocrlf=true does not normalize CRLF files' ' - - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - git config core.autocrlf true && - echo "* text=auto" > .gitattributes && - git read-tree --reset -u HEAD && - - has_cr LFonly && - has_cr CRLFonly && - LFonlydiff=$(git diff LFonly) && - CRLFonlydiff=$(git diff CRLFonly) && - LFwithNULdiff=$(git diff LFwithNUL) && - test -z "$LFonlydiff" -a -z "$CRLFonlydiff" -a -z "$LFwithNULdiff" -' - -test_expect_success 'text=auto, autocrlf=true does not normalize binary files' ' - - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - git config core.autocrlf true && - echo "* text=auto" > .gitattributes && - git read-tree --reset -u HEAD && - - ! has_cr LFwithNUL && - LFwithNULdiff=$(git diff LFwithNUL) && - test -z "$LFwithNULdiff" -' - -test_expect_success 'eol=crlf _does_ normalize binary files' ' - - rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && - echo "LFwithNUL eol=crlf" > .gitattributes && - git read-tree --reset -u HEAD && - - has_cr LFwithNUL && - LFwithNULdiff=$(git diff LFwithNUL) && - test -z "$LFwithNULdiff" -' - -test_done diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh index 90db54c9f9..deb3ae7813 100755 --- a/t/t0027-auto-crlf.sh +++ b/t/t0027-auto-crlf.sh @@ -4,12 +4,6 @@ test_description='CRLF conversion all combinations' . ./test-lib.sh -if ! test_have_prereq EXPENSIVE -then - skip_all="EXPENSIVE not set" - test_done -fi - compare_files () { tr '\015\000' QN <"$1" >"$1".expect && tr '\015\000' QN <"$2" | tr -d 'Z' >"$2".actual && @@ -75,7 +69,7 @@ check_warning () { *) echo >&2 "Illegal 1": "$1" ; return false ;; esac grep "will be replaced by" "$2" | sed -e "s/\(.*\) in [^ ]*$/\1/" | uniq >"$2".actual - test_cmp "$2".expect "$2".actual + test_i18ncmp "$2".expect "$2".actual } commit_check_warn () { diff --git a/t/t0065-strcmp-offset.sh b/t/t0065-strcmp-offset.sh new file mode 100755 index 0000000000..7d6d21425f --- /dev/null +++ b/t/t0065-strcmp-offset.sh @@ -0,0 +1,21 @@ +#!/bin/sh + +test_description='Test strcmp_offset functionality' + +. ./test-lib.sh + +while read s1 s2 expect +do + test_expect_success "strcmp_offset($s1, $s2)" ' + echo "$expect" >expect && + test-strcmp-offset "$s1" "$s2" >actual && + test_cmp expect actual + ' +done <<-EOF +abc abc 0 3 +abc def -1 0 +abc abz -1 2 +abc abcdef -1 3 +EOF + +test_done diff --git a/t/t1305-config-include.sh b/t/t1305-config-include.sh index e833939320..933915ec06 100755 --- a/t/t1305-config-include.sh +++ b/t/t1305-config-include.sh @@ -3,6 +3,16 @@ test_description='test config file include directives' . ./test-lib.sh +# Force setup_explicit_git_dir() to run until the end. This is needed +# by some tests to make sure real_path() is called on $GIT_DIR. The +# caller needs to make sure git commands are run from a subdirectory +# though or real_path() will not be called. +force_setup_explicit_git_dir() { + GIT_DIR="$(pwd)/.git" + GIT_WORK_TREE="$(pwd)" + export GIT_DIR GIT_WORK_TREE +} + test_expect_success 'include file by absolute path' ' echo "[test]one = 1" >one && echo "[include]path = \"$(pwd)/one\"" >.gitconfig && @@ -208,6 +218,61 @@ test_expect_success 'conditional include, both unanchored, icase' ' ) ' +test_expect_success 'conditional include, early config reading' ' + ( + cd foo && + echo "[includeIf \"gitdir:foo/\"]path=bar6" >>.git/config && + echo "[test]six=6" >.git/bar6 && + echo 6 >expect && + test-config read_early_config test.six >actual && + test_cmp expect actual + ) +' + +test_expect_success SYMLINKS 'conditional include, set up symlinked $HOME' ' + mkdir real-home && + ln -s real-home home && + ( + HOME="$TRASH_DIRECTORY/home" && + export HOME && + cd "$HOME" && + + git init foo && + cd foo && + mkdir sub + ) +' + +test_expect_success SYMLINKS 'conditional include, $HOME expansion with symlinks' ' + ( + HOME="$TRASH_DIRECTORY/home" && + export HOME && + cd "$HOME"/foo && + + echo "[includeIf \"gitdir:~/foo/\"]path=bar2" >>.git/config && + echo "[test]two=2" >.git/bar2 && + echo 2 >expect && + force_setup_explicit_git_dir && + git -C sub config test.two >actual && + test_cmp expect actual + ) +' + +test_expect_success SYMLINKS 'conditional include, relative path with symlinks' ' + echo "[includeIf \"gitdir:./foo/.git\"]path=bar4" >home/.gitconfig && + echo "[test]four=4" >home/bar4 && + ( + HOME="$TRASH_DIRECTORY/home" && + export HOME && + cd "$HOME"/foo && + + echo 4 >expect && + force_setup_explicit_git_dir && + git -C sub config test.four >actual && + test_cmp expect actual + ) +' + test_expect_success 'include cycles are detected' ' cat >.gitconfig <<-\EOF && [test]value = gitconfig diff --git a/t/t1309-early-config.sh b/t/t1309-early-config.sh index b97357b8ab..3dda215e8e 100755 --- a/t/t1309-early-config.sh +++ b/t/t1309-early-config.sh @@ -47,6 +47,24 @@ test_expect_success 'ceiling #2' ' test xdg = "$(cat output)" ' +cmdline_config="'test.source=cmdline'" +test_expect_success 'read config file in right order' ' + echo "[test]source = home" >>.gitconfig && + git init foo && + ( + cd foo && + echo "[test]source = repo" >>.git/config && + GIT_CONFIG_PARAMETERS=$cmdline_config test-config \ + read_early_config test.source >actual && + cat >expected <<-\EOF && + home + repo + cmdline + EOF + test_cmp expected actual + ) +' + test_with_config () { rm -rf throwaway && git init throwaway && @@ -59,7 +77,7 @@ test_with_config () { test_expect_success 'ignore .git/ with incompatible repository version' ' test_with_config "[core]repositoryformatversion = 999999" 2>err && - grep "warning:.* Expected git repo version <= [1-9]" err + test_i18ngrep "warning:.* Expected git repo version <= [1-9]" err ' test_expect_failure 'ignore .git/ with invalid repository version' ' diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index a23cd7b576..dc98b4bc6d 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -35,14 +35,14 @@ test_expect_success setup ' cd - ' -test_expect_success \ - "create $m" \ - "git update-ref $m $A && - test $A"' = $(cat .git/'"$m"')' -test_expect_success \ - "create $m with oldvalue verification" \ - "git update-ref $m $B $A && - test $B"' = $(cat .git/'"$m"')' +test_expect_success "create $m" ' + git update-ref $m $A && + test $A = $(cat .git/$m) +' +test_expect_success "create $m with oldvalue verification" ' + git update-ref $m $B $A && + test $B = $(cat .git/$m) +' test_expect_success "fail to delete $m with stale ref" ' test_must_fail git update-ref -d $m $A && test $B = "$(cat .git/$m)" @@ -67,14 +67,14 @@ test_expect_success "fail to create $n" ' test_must_fail git update-ref $n $A ' -test_expect_success \ - "create $m (by HEAD)" \ - "git update-ref HEAD $A && - test $A"' = $(cat .git/'"$m"')' -test_expect_success \ - "create $m (by HEAD) with oldvalue verification" \ - "git update-ref HEAD $B $A && - test $B"' = $(cat .git/'"$m"')' +test_expect_success "create $m (by HEAD)" ' + git update-ref HEAD $A && + test $A = $(cat .git/$m) +' +test_expect_success "create $m (by HEAD) with oldvalue verification" ' + git update-ref HEAD $B $A && + test $B = $(cat .git/$m) +' test_expect_success "fail to delete $m (by HEAD) with stale ref" ' test_must_fail git update-ref -d HEAD $A && test $B = $(cat .git/$m) @@ -176,17 +176,17 @@ test_expect_success '--no-create-reflog overrides core.logAllRefUpdates=always' test_must_fail git reflog exists $outside ' -test_expect_success \ - "create $m (by HEAD)" \ - "git update-ref HEAD $A && - test $A"' = $(cat .git/'"$m"')' -test_expect_success \ - "pack refs" \ - "git pack-refs --all" -test_expect_success \ - "move $m (by HEAD)" \ - "git update-ref HEAD $B $A && - test $B"' = $(cat .git/'"$m"')' +test_expect_success "create $m (by HEAD)" ' + git update-ref HEAD $A && + test $A = $(cat .git/$m) +' +test_expect_success 'pack refs' ' + git pack-refs --all +' +test_expect_success "move $m (by HEAD)" ' + git update-ref HEAD $B $A && + test $B = $(cat .git/$m) +' test_expect_success "delete $m (by HEAD) should remove both packed and loose $m" ' test_when_finished "rm -f .git/$m" && git update-ref -d HEAD $B && @@ -195,13 +195,13 @@ test_expect_success "delete $m (by HEAD) should remove both packed and loose $m" ' cp -f .git/HEAD .git/HEAD.orig -test_expect_success "delete symref without dereference" ' +test_expect_success 'delete symref without dereference' ' test_when_finished "cp -f .git/HEAD.orig .git/HEAD" && git update-ref --no-deref -d HEAD && test_path_is_missing .git/HEAD ' -test_expect_success "delete symref without dereference when the referred ref is packed" ' +test_expect_success 'delete symref without dereference when the referred ref is packed' ' test_when_finished "cp -f .git/HEAD.orig .git/HEAD" && echo foo >foo.c && git add foo.c && @@ -239,46 +239,46 @@ test_expect_success 'update-ref --no-deref -d can delete reference to bad ref' ' test_path_is_missing .git/refs/heads/ref-to-bad ' -test_expect_success '(not) create HEAD with old sha1' " +test_expect_success '(not) create HEAD with old sha1' ' test_must_fail git update-ref HEAD $A $B -" +' test_expect_success "(not) prior created .git/$m" ' test_when_finished "rm -f .git/$m" && test_path_is_missing .git/$m ' -test_expect_success \ - "create HEAD" \ - "git update-ref HEAD $A" -test_expect_success '(not) change HEAD with wrong SHA1' " +test_expect_success 'create HEAD' ' + git update-ref HEAD $A +' +test_expect_success '(not) change HEAD with wrong SHA1' ' test_must_fail git update-ref HEAD $B $Z -" +' test_expect_success "(not) changed .git/$m" ' test_when_finished "rm -f .git/$m" && ! test $B = $(cat .git/$m) ' rm -f .git/logs/refs/heads/master -test_expect_success \ - "create $m (logged by touch)" \ - 'test_config core.logAllRefUpdates false && - GIT_COMMITTER_DATE="2005-05-26 23:30" \ - git update-ref --create-reflog HEAD '"$A"' -m "Initial Creation" && - test '"$A"' = $(cat .git/'"$m"')' -test_expect_success \ - "update $m (logged by touch)" \ - 'test_config core.logAllRefUpdates false && - GIT_COMMITTER_DATE="2005-05-26 23:31" \ - git update-ref HEAD'" $B $A "'-m "Switch" && - test '"$B"' = $(cat .git/'"$m"')' -test_expect_success \ - "set $m (logged by touch)" \ - 'test_config core.logAllRefUpdates false && - GIT_COMMITTER_DATE="2005-05-26 23:41" \ - git update-ref HEAD'" $A && - test $A"' = $(cat .git/'"$m"')' - -test_expect_success "empty directory removal" ' +test_expect_success "create $m (logged by touch)" ' + test_config core.logAllRefUpdates false && + GIT_COMMITTER_DATE="2005-05-26 23:30" \ + git update-ref --create-reflog HEAD $A -m "Initial Creation" && + test $A = $(cat .git/$m) +' +test_expect_success "update $m (logged by touch)" ' + test_config core.logAllRefUpdates false && + GIT_COMMITTER_DATE="2005-05-26 23:31" \ + git update-ref HEAD $B $A -m "Switch" && + test $B = $(cat .git/$m) +' +test_expect_success "set $m (logged by touch)" ' + test_config core.logAllRefUpdates false && + GIT_COMMITTER_DATE="2005-05-26 23:41" \ + git update-ref HEAD $A && + test $A = $(cat .git/$m) +' + +test_expect_success 'empty directory removal' ' git branch d1/d2/r1 HEAD && git branch d1/r2 HEAD && test_path_is_file .git/refs/heads/d1/d2/r1 && @@ -290,7 +290,7 @@ test_expect_success "empty directory removal" ' test_path_is_file .git/logs/refs/heads/d1/r2 ' -test_expect_success "symref empty directory removal" ' +test_expect_success 'symref empty directory removal' ' git branch e1/e2/r1 HEAD && git branch e1/r2 HEAD && git checkout e1/e2/r1 && @@ -315,34 +315,34 @@ test_expect_success "verifying $m's log (logged by touch)" ' test_cmp expect .git/logs/$m ' -test_expect_success \ - "create $m (logged by config)" \ - 'test_config core.logAllRefUpdates true && - GIT_COMMITTER_DATE="2005-05-26 23:32" \ - git update-ref HEAD'" $A "'-m "Initial Creation" && - test '"$A"' = $(cat .git/'"$m"')' -test_expect_success \ - "update $m (logged by config)" \ - 'test_config core.logAllRefUpdates true && - GIT_COMMITTER_DATE="2005-05-26 23:33" \ - git update-ref HEAD'" $B $A "'-m "Switch" && - test '"$B"' = $(cat .git/'"$m"')' -test_expect_success \ - "set $m (logged by config)" \ - 'test_config core.logAllRefUpdates true && - GIT_COMMITTER_DATE="2005-05-26 23:43" \ - git update-ref HEAD '"$A && - test $A"' = $(cat .git/'"$m"')' +test_expect_success "create $m (logged by config)" ' + test_config core.logAllRefUpdates true && + GIT_COMMITTER_DATE="2005-05-26 23:32" \ + git update-ref HEAD $A -m "Initial Creation" && + test $A = $(cat .git/$m) +' +test_expect_success "update $m (logged by config)" ' + test_config core.logAllRefUpdates true && + GIT_COMMITTER_DATE="2005-05-26 23:33" \ + git update-ref HEAD'" $B $A "'-m "Switch" && + test $B = $(cat .git/$m) +' +test_expect_success "set $m (logged by config)" ' + test_config core.logAllRefUpdates true && + GIT_COMMITTER_DATE="2005-05-26 23:43" \ + git update-ref HEAD $A && + test $A = $(cat .git/$m) +' cat >expect <<EOF $Z $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150320 +0000 Initial Creation $A $B $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150380 +0000 Switch $B $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150980 +0000 EOF -test_expect_success \ - "verifying $m's log (logged by config)" \ - 'test_when_finished "rm -f .git/$m .git/logs/$m expect" && - test_cmp expect .git/logs/$m' +test_expect_success "verifying $m's log (logged by config)" ' + test_when_finished "rm -f .git/$m .git/logs/$m expect" && + test_cmp expect .git/logs/$m +' git update-ref $m $D cat >.git/logs/$m <<EOF @@ -356,86 +356,85 @@ EOF ed="Thu, 26 May 2005 18:32:00 -0500" gd="Thu, 26 May 2005 18:33:00 -0500" ld="Thu, 26 May 2005 18:43:00 -0500" -test_expect_success \ - 'Query "master@{May 25 2005}" (before history)' \ - 'test_when_finished "rm -f o e" && - git rev-parse --verify "master@{May 25 2005}" >o 2>e && - test '"$C"' = $(cat o) && - test "warning: Log for '\'master\'' only goes back to $ed." = "$(cat e)"' -test_expect_success \ - "Query master@{2005-05-25} (before history)" \ - 'test_when_finished "rm -f o e" && - git rev-parse --verify master@{2005-05-25} >o 2>e && - test '"$C"' = $(cat o) && - echo test "warning: Log for '\'master\'' only goes back to $ed." = "$(cat e)"' -test_expect_success \ - 'Query "master@{May 26 2005 23:31:59}" (1 second before history)' \ - 'test_when_finished "rm -f o e" && - git rev-parse --verify "master@{May 26 2005 23:31:59}" >o 2>e && - test '"$C"' = $(cat o) && - test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)"' -test_expect_success \ - 'Query "master@{May 26 2005 23:32:00}" (exactly history start)' \ - 'test_when_finished "rm -f o e" && - git rev-parse --verify "master@{May 26 2005 23:32:00}" >o 2>e && - test '"$C"' = $(cat o) && - test "" = "$(cat e)"' -test_expect_success \ - 'Query "master@{May 26 2005 23:32:30}" (first non-creation change)' \ - 'test_when_finished "rm -f o e" && - git rev-parse --verify "master@{May 26 2005 23:32:30}" >o 2>e && - test '"$A"' = $(cat o) && - test "" = "$(cat e)"' -test_expect_success \ - 'Query "master@{2005-05-26 23:33:01}" (middle of history with gap)' \ - 'test_when_finished "rm -f o e" && - git rev-parse --verify "master@{2005-05-26 23:33:01}" >o 2>e && - test '"$B"' = $(cat o) && - test "warning: Log for ref '"$m has gap after $gd"'." = "$(cat e)"' -test_expect_success \ - 'Query "master@{2005-05-26 23:38:00}" (middle of history)' \ - 'test_when_finished "rm -f o e" && - git rev-parse --verify "master@{2005-05-26 23:38:00}" >o 2>e && - test '"$Z"' = $(cat o) && - test "" = "$(cat e)"' -test_expect_success \ - 'Query "master@{2005-05-26 23:43:00}" (exact end of history)' \ - 'test_when_finished "rm -f o e" && - git rev-parse --verify "master@{2005-05-26 23:43:00}" >o 2>e && - test '"$E"' = $(cat o) && - test "" = "$(cat e)"' -test_expect_success \ - 'Query "master@{2005-05-28}" (past end of history)' \ - 'test_when_finished "rm -f o e" && - git rev-parse --verify "master@{2005-05-28}" >o 2>e && - test '"$D"' = $(cat o) && - test "warning: Log for ref '"$m unexpectedly ended on $ld"'." = "$(cat e)"' - +test_expect_success 'Query "master@{May 25 2005}" (before history)' ' + test_when_finished "rm -f o e" && + git rev-parse --verify "master@{May 25 2005}" >o 2>e && + test $C = $(cat o) && + test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" +' +test_expect_success 'Query master@{2005-05-25} (before history)' ' + test_when_finished "rm -f o e" && + git rev-parse --verify master@{2005-05-25} >o 2>e && + test $C = $(cat o) && + echo test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" +' +test_expect_success 'Query "master@{May 26 2005 23:31:59}" (1 second before history)' ' + test_when_finished "rm -f o e" && + git rev-parse --verify "master@{May 26 2005 23:31:59}" >o 2>e && + test $C = $(cat o) && + test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" +' +test_expect_success 'Query "master@{May 26 2005 23:32:00}" (exactly history start)' ' + test_when_finished "rm -f o e" && + git rev-parse --verify "master@{May 26 2005 23:32:00}" >o 2>e && + test $C = $(cat o) && + test "" = "$(cat e)" +' +test_expect_success 'Query "master@{May 26 2005 23:32:30}" (first non-creation change)' ' + test_when_finished "rm -f o e" && + git rev-parse --verify "master@{May 26 2005 23:32:30}" >o 2>e && + test $A = $(cat o) && + test "" = "$(cat e)" +' +test_expect_success 'Query "master@{2005-05-26 23:33:01}" (middle of history with gap)' ' + test_when_finished "rm -f o e" && + git rev-parse --verify "master@{2005-05-26 23:33:01}" >o 2>e && + test $B = $(cat o) && + test "warning: Log for ref $m has gap after $gd." = "$(cat e)" +' +test_expect_success 'Query "master@{2005-05-26 23:38:00}" (middle of history)' ' + test_when_finished "rm -f o e" && + git rev-parse --verify "master@{2005-05-26 23:38:00}" >o 2>e && + test $Z = $(cat o) && + test "" = "$(cat e)" +' +test_expect_success 'Query "master@{2005-05-26 23:43:00}" (exact end of history)' ' + test_when_finished "rm -f o e" && + git rev-parse --verify "master@{2005-05-26 23:43:00}" >o 2>e && + test $E = $(cat o) && + test "" = "$(cat e)" +' +test_expect_success 'Query "master@{2005-05-28}" (past end of history)' ' + test_when_finished "rm -f o e" && + git rev-parse --verify "master@{2005-05-28}" >o 2>e && + test $D = $(cat o) && + test "warning: Log for ref $m unexpectedly ended on $ld." = "$(cat e)" +' rm -f .git/$m .git/logs/$m expect -test_expect_success \ - 'creating initial files' \ - 'test_when_finished rm -f M && - echo TEST >F && - git add F && - GIT_AUTHOR_DATE="2005-05-26 23:30" \ - GIT_COMMITTER_DATE="2005-05-26 23:30" git commit -m add -a && - h_TEST=$(git rev-parse --verify HEAD) && - echo The other day this did not work. >M && - echo And then Bob told me how to fix it. >>M && - echo OTHER >F && - GIT_AUTHOR_DATE="2005-05-26 23:41" \ - GIT_COMMITTER_DATE="2005-05-26 23:41" git commit -F M -a && - h_OTHER=$(git rev-parse --verify HEAD) && - GIT_AUTHOR_DATE="2005-05-26 23:44" \ - GIT_COMMITTER_DATE="2005-05-26 23:44" git commit --amend && - h_FIXED=$(git rev-parse --verify HEAD) && - echo Merged initial commit and a later commit. >M && - echo $h_TEST >.git/MERGE_HEAD && - GIT_AUTHOR_DATE="2005-05-26 23:45" \ - GIT_COMMITTER_DATE="2005-05-26 23:45" git commit -F M && - h_MERGED=$(git rev-parse --verify HEAD)' +test_expect_success 'creating initial files' ' + test_when_finished rm -f M && + echo TEST >F && + git add F && + GIT_AUTHOR_DATE="2005-05-26 23:30" \ + GIT_COMMITTER_DATE="2005-05-26 23:30" git commit -m add -a && + h_TEST=$(git rev-parse --verify HEAD) && + echo The other day this did not work. >M && + echo And then Bob told me how to fix it. >>M && + echo OTHER >F && + GIT_AUTHOR_DATE="2005-05-26 23:41" \ + GIT_COMMITTER_DATE="2005-05-26 23:41" git commit -F M -a && + h_OTHER=$(git rev-parse --verify HEAD) && + GIT_AUTHOR_DATE="2005-05-26 23:44" \ + GIT_COMMITTER_DATE="2005-05-26 23:44" git commit --amend && + h_FIXED=$(git rev-parse --verify HEAD) && + echo Merged initial commit and a later commit. >M && + echo $h_TEST >.git/MERGE_HEAD && + GIT_AUTHOR_DATE="2005-05-26 23:45" \ + GIT_COMMITTER_DATE="2005-05-26 23:45" git commit -F M && + h_MERGED=$(git rev-parse --verify HEAD) +' cat >expect <<EOF $Z $h_TEST $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 commit (initial): add @@ -443,20 +442,20 @@ $h_TEST $h_OTHER $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150860 +0000 com $h_OTHER $h_FIXED $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117151040 +0000 commit (amend): The other day this did not work. $h_FIXED $h_MERGED $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117151100 +0000 commit (merge): Merged initial commit and a later commit. EOF -test_expect_success \ - 'git commit logged updates' \ - "test_cmp expect .git/logs/$m" +test_expect_success 'git commit logged updates' ' + test_cmp expect .git/logs/$m +' unset h_TEST h_OTHER h_FIXED h_MERGED -test_expect_success \ - 'git cat-file blob master:F (expect OTHER)' \ - 'test OTHER = $(git cat-file blob master:F)' -test_expect_success \ - 'git cat-file blob master@{2005-05-26 23:30}:F (expect TEST)' \ - 'test TEST = $(git cat-file blob "master@{2005-05-26 23:30}:F")' -test_expect_success \ - 'git cat-file blob master@{2005-05-26 23:42}:F (expect OTHER)' \ - 'test OTHER = $(git cat-file blob "master@{2005-05-26 23:42}:F")' +test_expect_success 'git cat-file blob master:F (expect OTHER)' ' + test OTHER = $(git cat-file blob master:F) +' +test_expect_success 'git cat-file blob master@{2005-05-26 23:30}:F (expect TEST)' ' + test TEST = $(git cat-file blob "master@{2005-05-26 23:30}:F") +' +test_expect_success 'git cat-file blob master@{2005-05-26 23:42}:F (expect OTHER)' ' + test OTHER = $(git cat-file blob "master@{2005-05-26 23:42}:F") +' a=refs/heads/a b=refs/heads/b diff --git a/t/t1405-main-ref-store.sh b/t/t1405-main-ref-store.sh new file mode 100755 index 0000000000..490521f8cb --- /dev/null +++ b/t/t1405-main-ref-store.sh @@ -0,0 +1,129 @@ +#!/bin/sh + +test_description='test main ref store api' + +. ./test-lib.sh + +RUN="test-ref-store main" + +test_expect_success 'pack_refs(PACK_REFS_ALL | PACK_REFS_PRUNE)' ' + test_commit one && + N=`find .git/refs -type f | wc -l` && + test "$N" != 0 && + $RUN pack-refs 3 && + N=`find .git/refs -type f | wc -l` +' + +test_expect_success 'peel_ref(new-tag)' ' + git rev-parse HEAD >expected && + git tag -a -m new-tag new-tag HEAD && + $RUN peel-ref refs/tags/new-tag >actual && + test_cmp expected actual +' + +test_expect_success 'create_symref(FOO, refs/heads/master)' ' + $RUN create-symref FOO refs/heads/master nothing && + echo refs/heads/master >expected && + git symbolic-ref FOO >actual && + test_cmp expected actual +' + +test_expect_success 'delete_refs(FOO, refs/tags/new-tag)' ' + git rev-parse FOO -- && + git rev-parse refs/tags/new-tag -- && + $RUN delete-refs 0 FOO refs/tags/new-tag && + test_must_fail git rev-parse FOO -- && + test_must_fail git rev-parse refs/tags/new-tag -- +' + +test_expect_success 'rename_refs(master, new-master)' ' + git rev-parse master >expected && + $RUN rename-ref refs/heads/master refs/heads/new-master && + git rev-parse new-master >actual && + test_cmp expected actual && + test_commit recreate-master +' + +test_expect_success 'for_each_ref(refs/heads/)' ' + $RUN for-each-ref refs/heads/ | cut -c 42- >actual && + cat >expected <<-\EOF && + master 0x0 + new-master 0x0 + EOF + test_cmp expected actual +' + +test_expect_success 'for_each_ref() is sorted' ' + $RUN for-each-ref refs/heads/ | cut -c 42- >actual && + sort actual > expected && + test_cmp expected actual +' + +test_expect_success 'resolve_ref(new-master)' ' + SHA1=`git rev-parse new-master` && + echo "$SHA1 refs/heads/new-master 0x0" >expected && + $RUN resolve-ref refs/heads/new-master 0 >actual && + test_cmp expected actual +' + +test_expect_success 'verify_ref(new-master)' ' + $RUN verify-ref refs/heads/new-master +' + +test_expect_success 'for_each_reflog()' ' + $RUN for-each-reflog | sort | cut -c 42- >actual && + cat >expected <<-\EOF && + HEAD 0x1 + refs/heads/master 0x0 + refs/heads/new-master 0x0 + EOF + test_cmp expected actual +' + +test_expect_success 'for_each_reflog_ent()' ' + $RUN for-each-reflog-ent HEAD >actual && + head -n1 actual | grep one && + tail -n2 actual | head -n1 | grep recreate-master +' + +test_expect_success 'for_each_reflog_ent_reverse()' ' + $RUN for-each-reflog-ent-reverse HEAD >actual && + head -n1 actual | grep recreate-master && + tail -n2 actual | head -n1 | grep one +' + +test_expect_success 'reflog_exists(HEAD)' ' + $RUN reflog-exists HEAD +' + +test_expect_success 'delete_reflog(HEAD)' ' + $RUN delete-reflog HEAD && + ! test -f .git/logs/HEAD +' + +test_expect_success 'create-reflog(HEAD)' ' + $RUN create-reflog HEAD 1 && + test -f .git/logs/HEAD +' + +test_expect_success 'delete_ref(refs/heads/foo)' ' + git checkout -b foo && + FOO_SHA1=`git rev-parse foo` && + git checkout --detach && + test_commit bar-commit && + git checkout -b bar && + BAR_SHA1=`git rev-parse bar` && + $RUN update-ref updating refs/heads/foo $BAR_SHA1 $FOO_SHA1 0 && + echo $BAR_SHA1 >expected && + git rev-parse refs/heads/foo >actual && + test_cmp expected actual +' + +test_expect_success 'delete_ref(refs/heads/foo)' ' + SHA1=`git rev-parse foo` && + git checkout --detach && + $RUN delete-ref msg refs/heads/foo $SHA1 0 && + test_must_fail git rev-parse refs/heads/foo -- +' + +test_done diff --git a/t/t1406-submodule-ref-store.sh b/t/t1406-submodule-ref-store.sh new file mode 100755 index 0000000000..13b5454c56 --- /dev/null +++ b/t/t1406-submodule-ref-store.sh @@ -0,0 +1,101 @@ +#!/bin/sh + +test_description='test submodule ref store api' + +. ./test-lib.sh + +RUN="test-ref-store submodule:sub" + +test_expect_success 'setup' ' + git init sub && + ( + cd sub && + test_commit first && + git checkout -b new-master + ) +' + +test_expect_success 'pack_refs() not allowed' ' + test_must_fail $RUN pack-refs 3 +' + +test_expect_success 'peel_ref(new-tag)' ' + git -C sub rev-parse HEAD >expected && + git -C sub tag -a -m new-tag new-tag HEAD && + $RUN peel-ref refs/tags/new-tag >actual && + test_cmp expected actual +' + +test_expect_success 'create_symref() not allowed' ' + test_must_fail $RUN create-symref FOO refs/heads/master nothing +' + +test_expect_success 'delete_refs() not allowed' ' + test_must_fail $RUN delete-refs 0 FOO refs/tags/new-tag +' + +test_expect_success 'rename_refs() not allowed' ' + test_must_fail $RUN rename-ref refs/heads/master refs/heads/new-master +' + +test_expect_success 'for_each_ref(refs/heads/)' ' + $RUN for-each-ref refs/heads/ | cut -c 42- >actual && + cat >expected <<-\EOF && + master 0x0 + new-master 0x0 + EOF + test_cmp expected actual +' + +test_expect_success 'for_each_ref() is sorted' ' + $RUN for-each-ref refs/heads/ | cut -c 42- >actual && + sort actual > expected && + test_cmp expected actual +' + +test_expect_success 'resolve_ref(master)' ' + SHA1=`git -C sub rev-parse master` && + echo "$SHA1 refs/heads/master 0x0" >expected && + $RUN resolve-ref refs/heads/master 0 >actual && + test_cmp expected actual +' + +test_expect_success 'verify_ref(new-master)' ' + $RUN verify-ref refs/heads/new-master +' + +test_expect_success 'for_each_reflog()' ' + $RUN for-each-reflog | sort | cut -c 42- >actual && + cat >expected <<-\EOF && + HEAD 0x1 + refs/heads/master 0x0 + refs/heads/new-master 0x0 + EOF + test_cmp expected actual +' + +test_expect_success 'for_each_reflog_ent()' ' + $RUN for-each-reflog-ent HEAD >actual && cat actual && + head -n1 actual | grep first && + tail -n2 actual | head -n1 | grep master.to.new +' + +test_expect_success 'for_each_reflog_ent_reverse()' ' + $RUN for-each-reflog-ent-reverse HEAD >actual && + head -n1 actual | grep master.to.new && + tail -n2 actual | head -n1 | grep first +' + +test_expect_success 'reflog_exists(HEAD)' ' + $RUN reflog-exists HEAD +' + +test_expect_success 'delete_reflog() not allowed' ' + test_must_fail $RUN delete-reflog HEAD +' + +test_expect_success 'create-reflog() not allowed' ' + test_must_fail $RUN create-reflog HEAD 1 +' + +test_done diff --git a/t/t1407-worktree-ref-store.sh b/t/t1407-worktree-ref-store.sh new file mode 100755 index 0000000000..5df06f3556 --- /dev/null +++ b/t/t1407-worktree-ref-store.sh @@ -0,0 +1,52 @@ +#!/bin/sh + +test_description='test worktree ref store api' + +. ./test-lib.sh + +RWT="test-ref-store worktree:wt" +RMAIN="test-ref-store worktree:main" + +test_expect_success 'setup' ' + test_commit first && + git worktree add -b wt-master wt && + ( + cd wt && + test_commit second + ) +' + +test_expect_success 'resolve_ref(<shared-ref>)' ' + SHA1=`git rev-parse master` && + echo "$SHA1 refs/heads/master 0x0" >expected && + $RWT resolve-ref refs/heads/master 0 >actual && + test_cmp expected actual && + $RMAIN resolve-ref refs/heads/master 0 >actual && + test_cmp expected actual +' + +test_expect_success 'resolve_ref(<per-worktree-ref>)' ' + SHA1=`git -C wt rev-parse HEAD` && + echo "$SHA1 refs/heads/wt-master 0x1" >expected && + $RWT resolve-ref HEAD 0 >actual && + test_cmp expected actual && + + SHA1=`git rev-parse HEAD` && + echo "$SHA1 refs/heads/master 0x1" >expected && + $RMAIN resolve-ref HEAD 0 >actual && + test_cmp expected actual +' + +test_expect_success 'create_symref(FOO, refs/heads/master)' ' + $RWT create-symref FOO refs/heads/master nothing && + echo refs/heads/master >expected && + git -C wt symbolic-ref FOO >actual && + test_cmp expected actual && + + $RMAIN create-symref FOO refs/heads/wt-master nothing && + echo refs/heads/wt-master >expected && + git symbolic-ref FOO >actual && + test_cmp expected actual +' + +test_done diff --git a/t/t1430-bad-ref-name.sh b/t/t1430-bad-ref-name.sh index 8937e25e49..e88349c8a0 100755 --- a/t/t1430-bad-ref-name.sh +++ b/t/t1430-bad-ref-name.sh @@ -122,7 +122,7 @@ test_expect_success 'push cannot create a badly named ref' ' ! grep -e "broken\.\.\.ref" output ' -test_expect_failure 'push --mirror can delete badly named ref' ' +test_expect_failure C_LOCALE_OUTPUT 'push --mirror can delete badly named ref' ' top=$(pwd) && git init src && git init dest && diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 33a51c9a67..adf0bc88ba 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -689,4 +689,35 @@ test_expect_success 'bogus head does not fallback to all heads' ' ! grep $blob out ' +# Corrupt the checksum on the index. +# Add 1 to the last byte in the SHA. +corrupt_index_checksum () { + perl -w -e ' + use Fcntl ":seek"; + open my $fh, "+<", ".git/index" or die "open: $!"; + binmode $fh; + seek $fh, -1, SEEK_END or die "seek: $!"; + read $fh, my $in_byte, 1 or die "read: $!"; + + $in_value = unpack("C", $in_byte); + $out_value = ($in_value + 1) & 255; + + $out_byte = pack("C", $out_value); + + seek $fh, -1, SEEK_END or die "seek: $!"; + print $fh $out_byte; + close $fh or die "close: $!"; + ' +} + +# Corrupt the checksum on the index and then +# verify that only fsck notices. +test_expect_success 'detect corrupt index file in fsck' ' + cp .git/index .git/index.backup && + test_when_finished "mv .git/index.backup .git/index" && + corrupt_index_checksum && + test_must_fail git fsck --cache 2>errors && + grep "bad index file" errors +' + test_done diff --git a/t/t1601-index-bogus.sh b/t/t1601-index-bogus.sh new file mode 100755 index 0000000000..73cc9323cd --- /dev/null +++ b/t/t1601-index-bogus.sh @@ -0,0 +1,22 @@ +#!/bin/sh + +test_description='test handling of bogus index entries' +. ./test-lib.sh + +test_expect_success 'create tree with null sha1' ' + tree=$(printf "160000 commit $_z40\\tbroken\\n" | git mktree) +' + +test_expect_success 'read-tree refuses to read null sha1' ' + test_must_fail git read-tree $tree +' + +test_expect_success 'GIT_ALLOW_NULL_SHA1 overrides refusal' ' + GIT_ALLOW_NULL_SHA1=1 git read-tree $tree +' + +test_expect_success 'git write-tree refuses to write null sha1' ' + test_must_fail git write-tree +' + +test_done diff --git a/t/t2025-worktree-add.sh b/t/t2025-worktree-add.sh index b618d6be21..b5c47ac602 100755 --- a/t/t2025-worktree-add.sh +++ b/t/t2025-worktree-add.sh @@ -63,6 +63,12 @@ test_expect_success '"add" worktree' ' ) ' +test_expect_success '"add" worktree with lock' ' + git rev-parse HEAD >expect && + git worktree add --detach --lock here-with-lock master && + test -f .git/worktrees/here-with-lock/locked +' + test_expect_success '"add" worktree from a subdir' ' ( mkdir sub && diff --git a/t/t2027-worktree-list.sh b/t/t2027-worktree-list.sh index 848da5f368..720063bf0d 100755 --- a/t/t2027-worktree-list.sh +++ b/t/t2027-worktree-list.sh @@ -20,7 +20,7 @@ test_expect_success 'rev-parse --git-common-dir on main worktree' ' test_expect_success 'rev-parse --git-path objects linked worktree' ' echo "$(git rev-parse --show-toplevel)/.git/objects" >expect && - test_when_finished "rm -rf linked-tree && git worktree prune" && + test_when_finished "rm -rf linked-tree actual expect && git worktree prune" && git worktree add --detach linked-tree master && git -C linked-tree rev-parse --git-path objects >actual && test_cmp expect actual @@ -28,19 +28,21 @@ test_expect_success 'rev-parse --git-path objects linked worktree' ' test_expect_success '"list" all worktrees from main' ' echo "$(git rev-parse --show-toplevel) $(git rev-parse --short HEAD) [$(git symbolic-ref --short HEAD)]" >expect && - test_when_finished "rm -rf here && git worktree prune" && + test_when_finished "rm -rf here out actual expect && git worktree prune" && git worktree add --detach here master && echo "$(git -C here rev-parse --show-toplevel) $(git rev-parse --short HEAD) (detached HEAD)" >>expect && - git worktree list | sed "s/ */ /g" >actual && + git worktree list >out && + sed "s/ */ /g" <out >actual && test_cmp expect actual ' test_expect_success '"list" all worktrees from linked' ' echo "$(git rev-parse --show-toplevel) $(git rev-parse --short HEAD) [$(git symbolic-ref --short HEAD)]" >expect && - test_when_finished "rm -rf here && git worktree prune" && + test_when_finished "rm -rf here out actual expect && git worktree prune" && git worktree add --detach here master && echo "$(git -C here rev-parse --show-toplevel) $(git rev-parse --short HEAD) (detached HEAD)" >>expect && - git -C here worktree list | sed "s/ */ /g" >actual && + git -C here worktree list >out && + sed "s/ */ /g" <out >actual && test_cmp expect actual ' @@ -49,7 +51,7 @@ test_expect_success '"list" all worktrees --porcelain' ' echo "HEAD $(git rev-parse HEAD)" >>expect && echo "branch $(git symbolic-ref HEAD)" >>expect && echo >>expect && - test_when_finished "rm -rf here && git worktree prune" && + test_when_finished "rm -rf here actual expect && git worktree prune" && git worktree add --detach here master && echo "worktree $(git -C here rev-parse --show-toplevel)" >>expect && echo "HEAD $(git rev-parse HEAD)" >>expect && @@ -69,16 +71,17 @@ test_expect_success 'bare repo setup' ' ' test_expect_success '"list" all worktrees from bare main' ' - test_when_finished "rm -rf there && git -C bare1 worktree prune" && + test_when_finished "rm -rf there out actual expect && git -C bare1 worktree prune" && git -C bare1 worktree add --detach ../there master && echo "$(pwd)/bare1 (bare)" >expect && echo "$(git -C there rev-parse --show-toplevel) $(git -C there rev-parse --short HEAD) (detached HEAD)" >>expect && - git -C bare1 worktree list | sed "s/ */ /g" >actual && + git -C bare1 worktree list >out && + sed "s/ */ /g" <out >actual && test_cmp expect actual ' test_expect_success '"list" all worktrees --porcelain from bare main' ' - test_when_finished "rm -rf there && git -C bare1 worktree prune" && + test_when_finished "rm -rf there actual expect && git -C bare1 worktree prune" && git -C bare1 worktree add --detach ../there master && echo "worktree $(pwd)/bare1" >expect && echo "bare" >>expect && @@ -92,11 +95,12 @@ test_expect_success '"list" all worktrees --porcelain from bare main' ' ' test_expect_success '"list" all worktrees from linked with a bare main' ' - test_when_finished "rm -rf there && git -C bare1 worktree prune" && + test_when_finished "rm -rf there out actual expect && git -C bare1 worktree prune" && git -C bare1 worktree add --detach ../there master && echo "$(pwd)/bare1 (bare)" >expect && echo "$(git -C there rev-parse --show-toplevel) $(git -C there rev-parse --short HEAD) (detached HEAD)" >>expect && - git -C there worktree list | sed "s/ */ /g" >actual && + git -C there worktree list >out && + sed "s/ */ /g" <out >actual && test_cmp expect actual ' @@ -118,9 +122,11 @@ test_expect_success 'broken main worktree still at the top' ' cd linked && echo "worktree $(pwd)" >expected && echo "ref: .broken" >../.git/HEAD && - git worktree list --porcelain | head -n 3 >actual && + git worktree list --porcelain >out && + head -n 3 out >actual && test_cmp ../expected actual && - git worktree list | head -n 1 >actual.2 && + git worktree list >out && + head -n 1 out >actual.2 && grep -F "(error)" actual.2 ) ' @@ -134,7 +140,8 @@ test_expect_success 'linked worktrees are sorted' ' test_commit new && git worktree add ../first && git worktree add ../second && - git worktree list --porcelain | grep ^worktree >actual + git worktree list --porcelain >out && + grep ^worktree out >actual ) && cat >expected <<-EOF && worktree $(pwd)/sorted/main diff --git a/t/t3007-ls-files-recurse-submodules.sh b/t/t3007-ls-files-recurse-submodules.sh index 4cf6ccf5a8..ebb956fd16 100755 --- a/t/t3007-ls-files-recurse-submodules.sh +++ b/t/t3007-ls-files-recurse-submodules.sh @@ -77,10 +77,22 @@ test_expect_success 'ls-files recurses more than 1 level' ' git -C submodule/subsub commit -m "add d" && git -C submodule submodule add ./subsub && git -C submodule commit -m "added subsub" && + git submodule absorbgitdirs && git ls-files --recurse-submodules >actual && test_cmp expect actual ' +test_expect_success 'ls-files works with GIT_DIR' ' + cat >expect <<-\EOF && + .gitmodules + c + subsub/d + EOF + + git --git-dir=submodule/.git ls-files --recurse-submodules >actual && + test_cmp expect actual +' + test_expect_success '--recurse-submodules and pathspecs setup' ' echo e >submodule/subsub/e.txt && git -C submodule/subsub add e.txt && diff --git a/t/t3008-ls-files-lazy-init-name-hash.sh b/t/t3008-ls-files-lazy-init-name-hash.sh new file mode 100755 index 0000000000..bdf5198b7e --- /dev/null +++ b/t/t3008-ls-files-lazy-init-name-hash.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +test_description='Test the lazy init name hash with various folder structures' + +. ./test-lib.sh + +if test 1 -eq $($GIT_BUILD_DIR/t/helper/test-online-cpus) +then + skip_all='skipping lazy-init tests, single cpu' + test_done +fi + +LAZY_THREAD_COST=2000 + +test_expect_success 'no buffer overflow in lazy_init_name_hash' ' + ( + test_seq $LAZY_THREAD_COST | sed "s/^/a_/" + echo b/b/b + test_seq $LAZY_THREAD_COST | sed "s/^/c_/" + test_seq 50 | sed "s/^/d_/" | tr "\n" "/"; echo d + ) | + sed "s/^/100644 $EMPTY_BLOB /" | + git update-index --index-info && + test-lazy-init-name-hash -m +' + +test_done diff --git a/t/t3203-branch-output.sh b/t/t3203-branch-output.sh index 5778c0afe1..a428ae6703 100755 --- a/t/t3203-branch-output.sh +++ b/t/t3203-branch-output.sh @@ -236,7 +236,7 @@ test_expect_success 'git branch --format option' ' Refname is refs/heads/ref-to-remote EOF git branch --format="Refname is %(refname)" >actual && - test_cmp expect actual + test_i18ncmp expect actual ' test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 33d392ba11..5bd0275930 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -366,7 +366,7 @@ test_expect_success 'verbose flag is heeded, even after --continue' ' grep "^ file1 | 2 +-$" output ' -test_expect_success 'multi-squash only fires up editor once' ' +test_expect_success C_LOCALE_OUTPUT 'multi-squash only fires up editor once' ' base=$(git rev-parse HEAD~4) && set_fake_editor && FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 squash 2 squash 3 squash 4" \ @@ -376,7 +376,7 @@ test_expect_success 'multi-squash only fires up editor once' ' test 1 = $(git show | grep ONCE | wc -l) ' -test_expect_success 'multi-fixup does not fire up editor' ' +test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' ' git checkout -b multi-fixup E && base=$(git rev-parse HEAD~4) && set_fake_editor && @@ -426,7 +426,7 @@ D ONCE EOF -test_expect_success 'squash and fixup generate correct log messages' ' +test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' ' git checkout -b squash-fixup E && base=$(git rev-parse HEAD~4) && set_fake_editor && @@ -439,7 +439,7 @@ test_expect_success 'squash and fixup generate correct log messages' ' git branch -D squash-fixup ' -test_expect_success 'squash ignores comments' ' +test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' ' git checkout -b skip-comments E && base=$(git rev-parse HEAD~4) && set_fake_editor && @@ -452,7 +452,7 @@ test_expect_success 'squash ignores comments' ' git branch -D skip-comments ' -test_expect_success 'squash ignores blank lines' ' +test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' ' git checkout -b skip-blank-lines E && base=$(git rev-parse HEAD~4) && set_fake_editor && @@ -860,7 +860,7 @@ test_expect_success 'rebase -ix with several instances of --exec' ' test_cmp expected actual ' -test_expect_success 'rebase -ix with --autosquash' ' +test_expect_success C_LOCALE_OUTPUT 'rebase -ix with --autosquash' ' git reset --hard execute && git checkout -b autosquash && echo second >second.txt && @@ -943,7 +943,7 @@ test_expect_success 'rebase -i --root fixup root commit' ' test 0 = $(git cat-file commit HEAD | grep -c ^parent\ ) ' -test_expect_success 'rebase --edit-todo does not works on non-interactive rebase' ' +test_expect_success C_LOCALE_OUTPUT 'rebase --edit-todo does not work on non-interactive rebase' ' git reset --hard && git checkout conflict-branch && set_fake_editor && diff --git a/t/t3415-rebase-autosquash.sh b/t/t3415-rebase-autosquash.sh index 48346f1cc0..5848949ec3 100755 --- a/t/t3415-rebase-autosquash.sh +++ b/t/t3415-rebase-autosquash.sh @@ -234,23 +234,23 @@ test_auto_fixup_fixup () { fi } -test_expect_success 'fixup! fixup!' ' +test_expect_success C_LOCALE_OUTPUT 'fixup! fixup!' ' test_auto_fixup_fixup fixup fixup ' -test_expect_success 'fixup! squash!' ' +test_expect_success C_LOCALE_OUTPUT 'fixup! squash!' ' test_auto_fixup_fixup fixup squash ' -test_expect_success 'squash! squash!' ' +test_expect_success C_LOCALE_OUTPUT 'squash! squash!' ' test_auto_fixup_fixup squash squash ' -test_expect_success 'squash! fixup!' ' +test_expect_success C_LOCALE_OUTPUT 'squash! fixup!' ' test_auto_fixup_fixup squash fixup ' -test_expect_success 'autosquash with custom inst format' ' +test_expect_success C_LOCALE_OUTPUT 'autosquash with custom inst format' ' git reset --hard base && git config --add rebase.instructionFormat "[%an @ %ar] %s" && echo 2 >file1 && diff --git a/t/t3428-rebase-signoff.sh b/t/t3428-rebase-signoff.sh new file mode 100755 index 0000000000..2afb564701 --- /dev/null +++ b/t/t3428-rebase-signoff.sh @@ -0,0 +1,46 @@ +#!/bin/sh + +test_description='git rebase --signoff + +This test runs git rebase --signoff and make sure that it works. +' + +. ./test-lib.sh + +# A simple file to commit +cat >file <<EOF +a +EOF + +# Expected commit message after rebase --signoff +cat >expected-signed <<EOF +first + +Signed-off-by: $(git var GIT_COMMITTER_IDENT | sed -e "s/>.*/>/") +EOF + +# Expected commit message after rebase without --signoff (or with --no-signoff) +cat >expected-unsigned <<EOF +first +EOF + + +# We configure an alias to do the rebase --signoff so that +# on the next subtest we can show that --no-signoff overrides the alias +test_expect_success 'rebase --signoff adds a sign-off line' ' + git commit --allow-empty -m "Initial empty commit" && + git add file && git commit -m first && + git config alias.rbs "rebase --signoff" && + git rbs HEAD^ && + git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase --no-signoff does not add a sign-off line' ' + git commit --amend -m "first" && + git rbs --no-signoff HEAD^ && + git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + test_cmp expected-unsigned actual +' + +test_done diff --git a/t/t3429-rebase-edit-todo.sh b/t/t3429-rebase-edit-todo.sh new file mode 100755 index 0000000000..b9292dfc2a --- /dev/null +++ b/t/t3429-rebase-edit-todo.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +test_description='rebase should reread the todo file if an exec modifies it' + +. ./test-lib.sh + +test_expect_success 'rebase exec modifies rebase-todo' ' + test_commit initial && + todo=.git/rebase-merge/git-rebase-todo && + git rebase HEAD -x "echo exec touch F >>$todo" && + test -e F +' + +test_done diff --git a/t/t3511-cherry-pick-x.sh b/t/t3511-cherry-pick-x.sh index bf0a5c9887..9888bf34b9 100755 --- a/t/t3511-cherry-pick-x.sh +++ b/t/t3511-cherry-pick-x.sh @@ -208,6 +208,50 @@ test_expect_success 'cherry-pick -x -s adds sob even when trailing sob exists fo test_cmp expect actual ' +test_expect_success 'cherry-pick -x handles commits with no NL at end of message' ' + pristine_detach initial && + printf "title\n\nSigned-off-by: A <a@example.com>" >msg && + sha1=$(git commit-tree -p initial mesg-with-footer^{tree} <msg) && + git cherry-pick -x $sha1 && + git log -1 --pretty=format:%B >actual && + + printf "\n(cherry picked from commit %s)\n" $sha1 >>msg && + test_cmp msg actual +' + +test_expect_success 'cherry-pick -x handles commits with no footer and no NL at end of message' ' + pristine_detach initial && + printf "title\n\nnot a footer" >msg && + sha1=$(git commit-tree -p initial mesg-with-footer^{tree} <msg) && + git cherry-pick -x $sha1 && + git log -1 --pretty=format:%B >actual && + + printf "\n\n(cherry picked from commit %s)\n" $sha1 >>msg && + test_cmp msg actual +' + +test_expect_success 'cherry-pick -s handles commits with no NL at end of message' ' + pristine_detach initial && + printf "title\n\nSigned-off-by: A <a@example.com>" >msg && + sha1=$(git commit-tree -p initial mesg-with-footer^{tree} <msg) && + git cherry-pick -s $sha1 && + git log -1 --pretty=format:%B >actual && + + printf "\nSigned-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>\n" >>msg && + test_cmp msg actual +' + +test_expect_success 'cherry-pick -s handles commits with no footer and no NL at end of message' ' + pristine_detach initial && + printf "title\n\nnot a footer" >msg && + sha1=$(git commit-tree -p initial mesg-with-footer^{tree} <msg) && + git cherry-pick -s $sha1 && + git log -1 --pretty=format:%B >actual && + + printf "\n\nSigned-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>\n" >>msg && + test_cmp msg actual +' + test_expect_success 'cherry-pick -x treats "(cherry picked from..." line as part of footer' ' pristine_detach initial && sha1=$(git rev-parse mesg-with-cherry-footer^0) && diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index 3c63455729..5f9913ba33 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -268,6 +268,14 @@ cat >expect.modified <<EOF M submod EOF +cat >expect.modified_inside <<EOF + m submod +EOF + +cat >expect.modified_untracked <<EOF + ? submod +EOF + cat >expect.cached <<EOF D submod EOF @@ -421,7 +429,7 @@ test_expect_success 'rm of a populated submodule with modifications fails unless test -d submod && test -f submod/.git && git status -s -uno --ignore-submodules=none >actual && - test_cmp expect.modified actual && + test_cmp expect.modified_inside actual && git rm -f submod && test ! -d submod && git status -s -uno --ignore-submodules=none >actual && @@ -436,7 +444,7 @@ test_expect_success 'rm of a populated submodule with untracked files fails unle test -d submod && test -f submod/.git && git status -s -uno --ignore-submodules=none >actual && - test_cmp expect.modified actual && + test_cmp expect.modified_untracked actual && git rm -f submod && test ! -d submod && git status -s -uno --ignore-submodules=none >actual && @@ -621,7 +629,7 @@ test_expect_success 'rm of a populated nested submodule with different nested HE test -d submod && test -f submod/.git && git status -s -uno --ignore-submodules=none >actual && - test_cmp expect.modified actual && + test_cmp expect.modified_inside actual && git rm -f submod && test ! -d submod && git status -s -uno --ignore-submodules=none >actual && @@ -636,7 +644,7 @@ test_expect_success 'rm of a populated nested submodule with nested modification test -d submod && test -f submod/.git && git status -s -uno --ignore-submodules=none >actual && - test_cmp expect.modified actual && + test_cmp expect.modified_inside actual && git rm -f submod && test ! -d submod && git status -s -uno --ignore-submodules=none >actual && @@ -651,7 +659,7 @@ test_expect_success 'rm of a populated nested submodule with nested untracked fi test -d submod && test -f submod/.git && git status -s -uno --ignore-submodules=none >actual && - test_cmp expect.modified actual && + test_cmp expect.modified_untracked actual && git rm -f submod && test ! -d submod && git status -s -uno --ignore-submodules=none >actual && diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index f9528fa00c..2ecb43a616 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -436,6 +436,28 @@ test_expect_success 'add -p handles globs' ' test_cmp expect actual ' +test_expect_success 'add -p handles relative paths' ' + git reset --hard && + + echo base >relpath.c && + git add "*.c" && + git commit -m relpath && + + echo change >relpath.c && + mkdir -p subdir && + git -C subdir add -p .. 2>error <<-\EOF && + y + EOF + + test_must_be_empty error && + + cat >expect <<-\EOF && + relpath.c + EOF + git diff --cached --name-only >actual && + test_cmp expect actual +' + test_expect_success 'add -p does not expand argument lists' ' git reset --hard && diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index b71d1e659e..3b4bed5c9a 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -865,7 +865,7 @@ test_expect_success 'stash push -p with pathspec shows no changes only once' ' git stash push -p foo >actual && echo "No local changes to save" >expect && git reset --hard HEAD~ && - test_cmp expect actual + test_i18ncmp expect actual ' test_expect_success 'stash push with pathspec shows no changes when there are none' ' @@ -875,7 +875,7 @@ test_expect_success 'stash push with pathspec shows no changes when there are no git stash push foo >actual && echo "No local changes to save" >expect && git reset --hard HEAD~ && - test_cmp expect actual + test_i18ncmp expect actual ' test_expect_success 'stash push with pathspec not in the repository errors out' ' diff --git a/t/t4038-diff-combined.sh b/t/t4038-diff-combined.sh index 0b4f7dfdc6..e2824d3437 100755 --- a/t/t4038-diff-combined.sh +++ b/t/t4038-diff-combined.sh @@ -354,7 +354,7 @@ test_expect_failure 'combine diff coalesce three parents' ' ' # Test for a bug reported at -# http://thread.gmane.org/gmane.comp.version-control.git/224410 +# https://public-inbox.org/git/20130515143508.GO25742@login.drsnuggles.stderr.nl/ # where a delete lines were missing from combined diff output when they # occurred exactly before the context lines of a later change. test_expect_success 'combine diff missing delete bug' ' diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 89a5bacac5..44807e218d 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -983,7 +983,9 @@ test_expect_success 'am works with multi-line in-body headers' ' rm -fr .git/rebase-apply && git checkout -f first && echo one >> file && - git commit -am "$LONG" --author="$LONG <long@example.com>" && + git commit -am "$LONG + + Body test" --author="$LONG <long@example.com>" && git format-patch --stdout -1 >patch && # bump from, date, and subject down to in-body header perl -lpe " @@ -997,7 +999,7 @@ test_expect_success 'am works with multi-line in-body headers' ' git am msg && # Ensure that the author and full message are present git cat-file commit HEAD | grep "^author.*long@example.com" && - git cat-file commit HEAD | grep "^$LONG" + git cat-file commit HEAD | grep "^$LONG$" ' test_done diff --git a/t/t4202-log.sh b/t/t4202-log.sh index f577990716..1c7d6729c6 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -577,6 +577,18 @@ test_expect_success 'log.decorate configuration' ' ' +test_expect_success 'log.decorate config parsing' ' + git log --oneline --decorate=full >expect.full && + git log --oneline --decorate=short >expect.short && + + test_config log.decorate full && + test_config log.mailmap true && + git log --oneline >actual && + test_cmp expect.full actual && + git log --oneline --decorate=short >actual && + test_cmp expect.short actual +' + test_expect_success TTY 'log output on a TTY' ' git log --oneline --decorate >expect.short && diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index 21eb8c8587..18aa1b5889 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -126,12 +126,12 @@ test_expect_success 'NUL separation with --stat' ' test_i18ncmp expected actual ' -test_expect_failure 'NUL termination with --stat' ' +test_expect_failure C_LOCALE_OUTPUT 'NUL termination with --stat' ' stat0_part=$(git diff --stat HEAD^ HEAD) && stat1_part=$(git diff-tree --no-commit-id --stat --root HEAD^) && printf "add bar\n$stat0_part\n\0$(commit_msg)\n$stat1_part\n0" >expected && git log -z --stat --pretty="tformat:%s" >actual && - test_i18ncmp expected actual + test_cmp expected actual ' test_expect_success 'setup more commits' ' diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 886b6953e4..fe2d4f15a7 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -390,7 +390,7 @@ test_expect_success TAR_HUGE,LONG_IS_64BIT 'system tar can read our huge size' ' test_cmp expect actual ' -test_expect_success LONG_IS_64BIT 'set up repository with far-future commit' ' +test_expect_success TIME_IS_64BIT 'set up repository with far-future commit' ' rm -f .git/index && echo content >file && git add file && @@ -398,11 +398,11 @@ test_expect_success LONG_IS_64BIT 'set up repository with far-future commit' ' git commit -m "tempori parendum" ' -test_expect_success LONG_IS_64BIT 'generate tar with future mtime' ' +test_expect_success TIME_IS_64BIT 'generate tar with future mtime' ' git archive HEAD >future.tar ' -test_expect_success TAR_HUGE,LONG_IS_64BIT 'system tar can read our future mtime' ' +test_expect_success TAR_HUGE,TIME_IS_64BIT,TIME_T_IS_64BIT 'system tar can read our future mtime' ' echo 4147 >expect && tar_info future.tar | cut -d" " -f2 >actual && test_cmp expect actual diff --git a/t/t5004-archive-corner-cases.sh b/t/t5004-archive-corner-cases.sh index cca23383c5..f6207f42b5 100755 --- a/t/t5004-archive-corner-cases.sh +++ b/t/t5004-archive-corner-cases.sh @@ -27,6 +27,9 @@ check_dir() { test_cmp expect actual } +test_lazy_prereq UNZIP_ZIP64_SUPPORT ' + "$GIT_UNZIP" -v | grep ZIP64_SUPPORT +' # bsdtar/libarchive versions before 3.1.3 consider a tar file with a # global pax header that is not followed by a file record as corrupt. @@ -155,4 +158,51 @@ test_expect_success ZIPINFO 'zip archive with many entries' ' test_cmp expect actual ' +test_expect_success EXPENSIVE,UNZIP,UNZIP_ZIP64_SUPPORT \ + 'zip archive bigger than 4GB' ' + # build string containing 65536 characters + s=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef && + s=$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s && + s=$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s$s && + + # create blob with a length of 65536 + 1 bytes + blob=$(echo $s | git hash-object -w --stdin) && + + # create tree containing 65500 entries of that blob + for i in $(test_seq 1 65500) + do + echo "100644 blob $blob $i" + done >tree && + tree=$(git mktree <tree) && + + # zip it, creating an archive a bit bigger than 4GB + git archive -0 -o many-big.zip $tree && + + "$GIT_UNZIP" -t many-big.zip 9999 65500 && + "$GIT_UNZIP" -t many-big.zip +' + +test_expect_success EXPENSIVE,LONG_IS_64BIT,UNZIP,UNZIP_ZIP64_SUPPORT,ZIPINFO \ + 'zip archive with files bigger than 4GB' ' + # Pack created with: + # dd if=/dev/zero of=file bs=1M count=4100 && git hash-object -w file + mkdir -p .git/objects/pack && + ( + cd .git/objects/pack && + "$GIT_UNZIP" "$TEST_DIRECTORY"/t5004/big-pack.zip + ) && + blob=754a93d6fada4c6873360e6cb4b209132271ab0e && + size=$(expr 4100 "*" 1024 "*" 1024) && + + # create a tree containing the file + tree=$(echo "100644 blob $blob big-file" | git mktree) && + + # zip it, creating an archive with a file bigger than 4GB + git archive -o big.zip $tree && + + "$GIT_UNZIP" -t big.zip && + "$ZIPINFO" big.zip >big.lst && + grep $size big.lst +' + test_done diff --git a/t/t5004/big-pack.zip b/t/t5004/big-pack.zip Binary files differnew file mode 100644 index 0000000000..caaf614eee --- /dev/null +++ b/t/t5004/big-pack.zip diff --git a/t/t5316-pack-delta-depth.sh b/t/t5316-pack-delta-depth.sh index 37143ea0ac..2ed479b712 100755 --- a/t/t5316-pack-delta-depth.sh +++ b/t/t5316-pack-delta-depth.sh @@ -82,12 +82,16 @@ test_expect_success 'packing produces a long delta' ' # Use --window=0 to make sure we are seeing reused deltas, # not computing a new long chain. pack=$(git pack-objects --all --window=0 </dev/null pack) && - test 9 = "$(max_chain pack-$pack.pack)" + echo 9 >expect && + max_chain pack-$pack.pack >actual && + test_i18ncmp expect actual ' test_expect_success '--depth limits depth' ' pack=$(git pack-objects --all --depth=5 </dev/null pack) && - test 5 = "$(max_chain pack-$pack.pack)" + echo 5 >expect && + max_chain pack-$pack.pack >actual && + test_i18ncmp expect actual ' test_done diff --git a/t/t5531-deep-submodule-push.sh b/t/t5531-deep-submodule-push.sh index f55137f76f..57ba322628 100755 --- a/t/t5531-deep-submodule-push.sh +++ b/t/t5531-deep-submodule-push.sh @@ -475,4 +475,56 @@ test_expect_success 'push only unpushed submodules recursively' ' test_cmp expected_pub actual_pub ' +test_expect_success 'push propagating the remotes name to a submodule' ' + git -C work remote add origin ../pub.git && + git -C work remote add pub ../pub.git && + + > work/gar/bage/junk10 && + git -C work/gar/bage add junk10 && + git -C work/gar/bage commit -m "Tenth junk" && + git -C work add gar/bage && + git -C work commit -m "Tenth junk added to gar/bage" && + + # Fails when submodule does not have a matching remote + test_must_fail git -C work push --recurse-submodules=on-demand pub master && + # Succeeds when submodules has matching remote and refspec + git -C work push --recurse-submodules=on-demand origin master && + + git -C submodule.git rev-parse master >actual_submodule && + git -C pub.git rev-parse master >actual_pub && + git -C work/gar/bage rev-parse master >expected_submodule && + git -C work rev-parse master >expected_pub && + test_cmp expected_submodule actual_submodule && + test_cmp expected_pub actual_pub +' + +test_expect_success 'push propagating refspec to a submodule' ' + > work/gar/bage/junk11 && + git -C work/gar/bage add junk11 && + git -C work/gar/bage commit -m "Eleventh junk" && + + git -C work checkout branch2 && + git -C work add gar/bage && + git -C work commit -m "updating gar/bage in branch2" && + + # Fails when submodule does not have a matching branch + test_must_fail git -C work push --recurse-submodules=on-demand origin branch2 && + # Fails when refspec includes an object id + test_must_fail git -C work push --recurse-submodules=on-demand origin \ + "$(git -C work rev-parse branch2):refs/heads/branch2" && + # Fails when refspec includes 'HEAD' as it is unsupported at this time + test_must_fail git -C work push --recurse-submodules=on-demand origin \ + HEAD:refs/heads/branch2 && + + git -C work/gar/bage branch branch2 master && + git -C work push --recurse-submodules=on-demand origin branch2 && + + git -C submodule.git rev-parse branch2 >actual_submodule && + git -C pub.git rev-parse branch2 >actual_pub && + git -C work/gar/bage rev-parse branch2 >expected_submodule && + git -C work rev-parse branch2 >expected_pub && + test_cmp expected_submodule actual_submodule && + test_cmp expected_pub actual_pub +' + test_done diff --git a/t/t5533-push-cas.sh b/t/t5533-push-cas.sh index a2c9e7439f..d38ecee217 100755 --- a/t/t5533-push-cas.sh +++ b/t/t5533-push-cas.sh @@ -229,4 +229,33 @@ test_expect_success 'new branch already exists' ' ) ' +test_expect_success 'background updates of REMOTE can be mitigated with a non-updated REMOTE-push' ' + rm -rf src dst && + git init --bare src.bare && + test_when_finished "rm -rf src.bare" && + git clone --no-local src.bare dst && + test_when_finished "rm -rf dst" && + ( + cd dst && + test_commit G && + git remote add origin-push ../src.bare && + git push origin-push master:master + ) && + git clone --no-local src.bare dst2 && + test_when_finished "rm -rf dst2" && + ( + cd dst2 && + test_commit H && + git push + ) && + ( + cd dst && + test_commit I && + git fetch origin && + test_must_fail git push --force-with-lease origin-push && + git fetch origin-push && + git push --force-with-lease origin-push + ) +' + test_done diff --git a/t/t5534-push-signed.sh b/t/t5534-push-signed.sh index ecb8d446a5..5bcb288f5c 100755 --- a/t/t5534-push-signed.sh +++ b/t/t5534-push-signed.sh @@ -124,6 +124,43 @@ test_expect_success GPG 'signed push sends push certificate' ' test_cmp expect dst/push-cert-status ' +test_expect_success GPG 'inconsistent push options in signed push not allowed' ' + # First, invoke receive-pack with dummy input to obtain its preamble. + prepare_dst && + git -C dst config receive.certnonceseed sekrit && + git -C dst config receive.advertisepushoptions 1 && + printf xxxx | test_might_fail git receive-pack dst >preamble && + + # Then, invoke push. Simulate a receive-pack that sends the preamble we + # obtained, followed by a dummy packet. + write_script myscript <<-\EOF && + cat preamble && + printf xxxx && + cat >push + EOF + test_might_fail git push --push-option="foo" --push-option="bar" \ + --receive-pack="\"$(pwd)/myscript\"" --signed dst --delete ff && + + # Replay the push output on a fresh dst, checking that ff is truly + # deleted. + prepare_dst && + git -C dst config receive.certnonceseed sekrit && + git -C dst config receive.advertisepushoptions 1 && + git receive-pack dst <push && + test_must_fail git -C dst rev-parse ff && + + # Tweak the push output to make the push option outside the cert + # different, then replay it on a fresh dst, checking that ff is not + # deleted. + perl -pe "s/([^ ])bar/\$1baz/" push >push.tweak && + prepare_dst && + git -C dst config receive.certnonceseed sekrit && + git -C dst config receive.advertisepushoptions 1 && + git receive-pack dst <push.tweak >out && + git -C dst rev-parse ff && + grep "inconsistent push options" out +' + test_expect_success GPG 'fail without key and heed user.signingkey' ' prepare_dst && mkdir -p dst/.git/hooks && diff --git a/t/t5545-push-options.sh b/t/t5545-push-options.sh index 97065e62b8..f9232f5d0f 100755 --- a/t/t5545-push-options.sh +++ b/t/t5545-push-options.sh @@ -142,6 +142,46 @@ test_expect_success 'push options work properly across http' ' test_cmp expect actual ' +test_expect_success 'push options and submodules' ' + test_when_finished "rm -rf parent" && + test_when_finished "rm -rf parent_upstream" && + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + cp -r upstream parent_upstream && + test_commit -C upstream one && + + test_create_repo parent && + git -C parent remote add up ../parent_upstream && + test_commit -C parent one && + git -C parent push --mirror up && + + git -C parent submodule add ../upstream workbench && + git -C parent/workbench remote add up ../../upstream && + git -C parent commit -m "add submoule" && + + test_commit -C parent/workbench two && + git -C parent add workbench && + git -C parent commit -m "update workbench" && + + git -C parent push \ + --push-option=asdf --push-option="more structured text" \ + --recurse-submodules=on-demand up master && + + git -C upstream rev-parse --verify master >expect && + git -C parent/workbench rev-parse --verify master >actual && + test_cmp expect actual && + + git -C parent_upstream rev-parse --verify master >expect && + git -C parent rev-parse --verify master >actual && + test_cmp expect actual && + + printf "asdf\nmore structured text\n" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options && + test_cmp expect upstream/.git/hooks/post-receive.push_options && + test_cmp expect parent_upstream/.git/hooks/pre-receive.push_options && + test_cmp expect parent_upstream/.git/hooks/post-receive.push_options +' + stop_httpd test_done diff --git a/t/t5547-push-quarantine.sh b/t/t5547-push-quarantine.sh index af9fcd833a..113c87007f 100755 --- a/t/t5547-push-quarantine.sh +++ b/t/t5547-push-quarantine.sh @@ -58,4 +58,15 @@ test_expect_success 'push to repo path with path separator (colon)' ' git push "$(pwd)/xxx${pathsep}yyy.git" HEAD ' +test_expect_success 'updating a ref from quarantine is forbidden' ' + git init --bare update.git && + write_script update.git/hooks/pre-receive <<-\EOF && + read old new refname + git update-ref refs/heads/unrelated $new + exit 1 + EOF + test_must_fail git push update.git HEAD && + git -C update.git fsck +' + test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index b52b8acf98..9c56f771b6 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -427,6 +427,12 @@ test_expect_success 'GIT_SSH_VARIANT overrides plink to tortoiseplink' ' expect_ssh "-batch -P 123" myhost src ' +test_expect_success 'clean failure on broken quoting' ' + test_must_fail \ + env GIT_SSH_COMMAND="${SQ}plink.exe -v" \ + git clone "[myhost:123]:src" sq-failure +' + # Reset the GIT_SSH environment variable for clone tests. setup_ssh_wrapper diff --git a/t/t5611-clone-config.sh b/t/t5611-clone-config.sh index e4850b778c..39329eb7a8 100755 --- a/t/t5611-clone-config.sh +++ b/t/t5611-clone-config.sh @@ -19,6 +19,14 @@ test_expect_success 'clone -c can set multi-keys' ' test_cmp expect actual ' +test_expect_success 'clone -c can set multi-keys, including some empty' ' + rm -rf child && + git clone -c credential.helper= -c credential.helper=hi . child && + printf "%s\n" "" hi >expect && + git --git-dir=child/.git config --get-all credential.helper >actual && + test_cmp expect actual +' + test_expect_success 'clone -c without a value is boolean true' ' rm -rf child && git clone -c core.foo . child && diff --git a/t/t5612-clone-refspec.sh b/t/t5612-clone-refspec.sh index 7ace2535c8..fac5a73851 100755 --- a/t/t5612-clone-refspec.sh +++ b/t/t5612-clone-refspec.sh @@ -17,13 +17,20 @@ test_expect_success 'setup' ' echo four >file && git commit -a -m four && git checkout master && + git tag five && # default clone git clone . dir_all && + # default clone --no-tags + git clone --no-tags . dir_all_no_tags && + # default --single that follows HEAD=master git clone --single-branch . dir_master && + # default --single that follows HEAD=master with no tags + git clone --single-branch --no-tags . dir_master_no_tags && + # default --single that follows HEAD=side git checkout side && git clone --single-branch . dir_side && @@ -45,6 +52,9 @@ test_expect_success 'setup' ' # explicit --single with tag git clone --single-branch --branch two . dir_tag && + # explicit --single with tag and --no-tags + git clone --single-branch --no-tags --branch two . dir_tag_no_tags && + # advance both "master" and "side" branches git checkout side && echo five >file && @@ -59,7 +69,8 @@ test_expect_success 'setup' ' test_expect_success 'by default all branches will be kept updated' ' ( - cd dir_all && git fetch && + cd dir_all && + git fetch && git for-each-ref refs/remotes/origin | sed -e "/HEAD$/d" \ -e "s|/remotes/origin/|/heads/|" >../actual @@ -71,28 +82,82 @@ test_expect_success 'by default all branches will be kept updated' ' test_expect_success 'by default no tags will be kept updated' ' ( - cd dir_all && git fetch && + cd dir_all && + git fetch && git for-each-ref refs/tags >../actual ) && git for-each-ref refs/tags >expect && - test_must_fail test_cmp expect actual + test_must_fail test_cmp expect actual && + test_line_count = 2 actual +' + +test_expect_success 'clone with --no-tags' ' + ( + cd dir_all_no_tags && + git fetch && + git for-each-ref refs/tags >../actual + ) && + >expect && + test_cmp expect actual ' test_expect_success '--single-branch while HEAD pointing at master' ' ( - cd dir_master && git fetch && + cd dir_master && + git fetch && git for-each-ref refs/remotes/origin | sed -e "/HEAD$/d" \ -e "s|/remotes/origin/|/heads/|" >../actual ) && # only follow master git for-each-ref refs/heads/master >expect && - test_cmp expect actual + # get & check latest tags + test_cmp expect actual && + ( + cd dir_master && + git fetch --tags && + git for-each-ref refs/tags >../actual + ) && + git for-each-ref refs/tags >expect && + test_cmp expect actual && + test_line_count = 2 actual +' + +test_expect_success '--single-branch while HEAD pointing at master and --no-tags' ' + ( + cd dir_master_no_tags && + git fetch && + git for-each-ref refs/remotes/origin | + sed -e "/HEAD$/d" \ + -e "s|/remotes/origin/|/heads/|" >../actual + ) && + # only follow master + git for-each-ref refs/heads/master >expect && + test_cmp expect actual && + # get tags (noop) + ( + cd dir_master_no_tags && + git fetch && + git for-each-ref refs/tags >../actual + ) && + >expect && + test_cmp expect actual && + test_line_count = 0 actual && + # get tags with --tags overrides tagOpt + ( + cd dir_master_no_tags && + git fetch --tags && + git for-each-ref refs/tags >../actual + ) && + git for-each-ref refs/tags >expect && + test_cmp expect actual && + test_line_count = 2 actual ' test_expect_success '--single-branch while HEAD pointing at side' ' ( - cd dir_side && git fetch && + cd dir_side && + git fetch && git for-each-ref refs/remotes/origin | sed -e "/HEAD$/d" \ -e "s|/remotes/origin/|/heads/|" >../actual @@ -104,7 +169,8 @@ test_expect_success '--single-branch while HEAD pointing at side' ' test_expect_success '--single-branch with explicit --branch side' ' ( - cd dir_side2 && git fetch && + cd dir_side2 && + git fetch && git for-each-ref refs/remotes/origin | sed -e "/HEAD$/d" \ -e "s|/remotes/origin/|/heads/|" >../actual @@ -116,16 +182,29 @@ test_expect_success '--single-branch with explicit --branch side' ' test_expect_success '--single-branch with explicit --branch with tag fetches updated tag' ' ( - cd dir_tag && git fetch && + cd dir_tag && + git fetch && git for-each-ref refs/tags >../actual ) && git for-each-ref refs/tags >expect && test_cmp expect actual ' +test_expect_success '--single-branch with explicit --branch with tag fetches updated tag despite --no-tags' ' + ( + cd dir_tag_no_tags && + git fetch && + git for-each-ref refs/tags >../actual + ) && + git for-each-ref refs/tags/two >expect && + test_cmp expect actual && + test_line_count = 1 actual +' + test_expect_success '--single-branch with --mirror' ' ( - cd dir_mirror && git fetch && + cd dir_mirror && + git fetch && git for-each-ref refs > ../actual ) && git for-each-ref refs >expect && @@ -134,7 +213,8 @@ test_expect_success '--single-branch with --mirror' ' test_expect_success '--single-branch with explicit --branch and --mirror' ' ( - cd dir_mirror_side && git fetch && + cd dir_mirror_side && + git fetch && git for-each-ref refs > ../actual ) && git for-each-ref refs >expect && @@ -143,7 +223,8 @@ test_expect_success '--single-branch with explicit --branch and --mirror' ' test_expect_success '--single-branch with detached' ' ( - cd dir_detached && git fetch && + cd dir_detached && + git fetch && git for-each-ref refs/remotes/origin | sed -e "/HEAD$/d" \ -e "s|/remotes/origin/|/heads/|" >../actual diff --git a/t/t5614-clone-submodules.sh b/t/t5614-clone-submodules-shallow.sh index a87d329656..a87d329656 100755 --- a/t/t5614-clone-submodules.sh +++ b/t/t5614-clone-submodules-shallow.sh diff --git a/t/t6134-pathspec-in-submodule.sh b/t/t6134-pathspec-in-submodule.sh index fd401ca605..99a8982ab1 100755 --- a/t/t6134-pathspec-in-submodule.sh +++ b/t/t6134-pathspec-in-submodule.sh @@ -21,7 +21,7 @@ EOF test_expect_success 'error message for path inside submodule' ' echo a >sub/a && test_must_fail git add sub/a 2>actual && - test_cmp expect actual + test_i18ncmp expect actual ' cat <<EOF >expect @@ -30,7 +30,7 @@ EOF test_expect_success 'error message for path inside submodule from within submodule' ' test_must_fail git -C sub add . 2>actual && - test_cmp expect actual + test_i18ncmp expect actual ' test_done diff --git a/t/t6500-gc.sh b/t/t6500-gc.sh index 08de2e8ab0..cc7acd101d 100755 --- a/t/t6500-gc.sh +++ b/t/t6500-gc.sh @@ -67,6 +67,16 @@ test_expect_success 'auto gc with too many loose objects does not attempt to cre test_line_count = 2 new # There is one new pack and its .idx ' +run_and_wait_for_auto_gc () { + # We read stdout from gc for the side effect of waiting until the + # background gc process exits, closing its fd 9. Furthermore, the + # variable assignment from a command substitution preserves the + # exit status of the main gc process. + # Note: this fd trickery doesn't work on Windows, but there is no + # need to, because on Win the auto gc always runs in the foreground. + doesnt_matter=$(git gc --auto 9>&1) +} + test_expect_success 'background auto gc does not run if gc.log is present and recent but does if it is old' ' test_commit foo && test_commit bar && @@ -80,7 +90,13 @@ test_expect_success 'background auto gc does not run if gc.log is present and re test-chmtime =-345600 .git/gc.log && test_must_fail git gc --auto && test_config gc.logexpiry 2.days && - git gc --auto + run_and_wait_for_auto_gc && + ls .git/objects/pack/pack-*.pack >packs && + test_line_count = 1 packs ' +# DO NOT leave a detached auto gc process running near the end of the +# test script: it can run long enough in the background to racily +# interfere with the cleanup in 'test_done'. + test_done diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index bb2e4d704d..0ef7b94394 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -87,7 +87,7 @@ test_expect_success 'creating a tag with --create-reflog should create reflog' ' git tag --create-reflog tag_with_reflog && git reflog exists refs/tags/tag_with_reflog && sed -e "s/^.* //" .git/logs/refs/tags/tag_with_reflog >actual && - test_cmp expected actual + test_i18ncmp expected actual ' test_expect_success 'annotated tag with --create-reflog has correct message' ' @@ -98,7 +98,7 @@ test_expect_success 'annotated tag with --create-reflog has correct message' ' git tag -m "annotated tag" --create-reflog tag_with_reflog && git reflog exists refs/tags/tag_with_reflog && sed -e "s/^.* //" .git/logs/refs/tags/tag_with_reflog >actual && - test_cmp expected actual + test_i18ncmp expected actual ' test_expect_success '--create-reflog does not create reflog on failure' ' diff --git a/t/t7009-filter-branch-null-sha1.sh b/t/t7009-filter-branch-null-sha1.sh index c27f90f285..a8d9ec4987 100755 --- a/t/t7009-filter-branch-null-sha1.sh +++ b/t/t7009-filter-branch-null-sha1.sh @@ -31,6 +31,12 @@ test_expect_success 'setup: bring HEAD and index in sync' ' git commit -a -m "back to normal" ' +test_expect_success 'noop filter-branch complains' ' + test_must_fail git filter-branch \ + --force --prune-empty \ + --index-filter "true" +' + test_expect_success 'filter commands are still checked' ' test_must_fail git filter-branch \ --force --prune-empty \ diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index cf77a3a357..dcac364c5f 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -38,6 +38,14 @@ test_expect_success 'submodule update aborts on missing .gitmodules file' ' test_i18ngrep "Submodule path .sub. not initialized" actual ' +test_expect_success 'submodule update aborts on missing gitmodules url' ' + test_when_finished "git update-index --remove sub" && + git update-index --add --cacheinfo 160000,$(git rev-parse HEAD),sub && + test_when_finished "rm -f .gitmodules" && + git config -f .gitmodules submodule.s.path sub && + test_must_fail git submodule init +' + test_expect_success 'configuration parsing' ' test_when_finished "rm -f .gitmodules" && cat >.gitmodules <<-\EOF && @@ -273,6 +281,20 @@ test_expect_success 'submodule add with ./, /.. and // in path' ' test_cmp empty untracked ' +test_expect_success !CYGWIN 'submodule add with \\ in path' ' + test_when_finished "rm -rf parent sub\\with\\backslash" && + + # Initialize a repo with a backslash in its name + git init sub\\with\\backslash && + touch sub\\with\\backslash/empty.file && + git -C sub\\with\\backslash add empty.file && + git -C sub\\with\\backslash commit -m "Added empty.file" && + + # Add that repository as a submodule + git init parent && + git -C parent submodule add ../sub\\with\\backslash +' + test_expect_success 'submodule add in subdirectory' ' echo "refs/heads/master" >expect && >empty && diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index 4ac386d98b..034914a14f 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -447,7 +447,7 @@ test_expect_success 'submodule update - command run for initial population of su EOF rm -rf super/submodule && test_must_fail git -C super submodule update 2>actual && - test_cmp expect actual && + test_i18ncmp expect actual && git -C super submodule update --checkout ' diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh index d31b34da83..055c90736e 100755 --- a/t/t7506-status-submodule.sh +++ b/t/t7506-status-submodule.sh @@ -17,6 +17,12 @@ test_create_repo_with_commit () { ) } +sanitize_output () { + sed -e "s/$_x40/HASH/" -e "s/$_x40/HASH/" output >output2 && + mv output2 output +} + + test_expect_success 'setup' ' test_create_repo_with_commit sub && echo output > .gitignore && @@ -50,6 +56,15 @@ test_expect_success 'status with modified file in submodule (porcelain)' ' EOF ' +test_expect_success 'status with modified file in submodule (short)' ' + (cd sub && git reset --hard) && + echo "changed" >sub/foo && + git status --short >output && + diff output - <<-\EOF + m sub + EOF +' + test_expect_success 'status with added file in submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && git status >output && @@ -64,6 +79,14 @@ test_expect_success 'status with added file in submodule (porcelain)' ' EOF ' +test_expect_success 'status with added file in submodule (short)' ' + (cd sub && git reset --hard && echo >foo && git add foo) && + git status --short >output && + diff output - <<-\EOF + m sub + EOF +' + test_expect_success 'status with untracked file in submodule' ' (cd sub && git reset --hard) && echo "content" >sub/new-file && @@ -83,6 +106,13 @@ test_expect_success 'status with untracked file in submodule (porcelain)' ' EOF ' +test_expect_success 'status with untracked file in submodule (short)' ' + git status --short >output && + diff output - <<-\EOF + ? sub + EOF +' + test_expect_success 'status with added and untracked file in submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && echo "content" >sub/new-file && @@ -177,8 +207,24 @@ test_expect_success 'status with added file in modified submodule with .git file test_i18ngrep "modified: sub (new commits, modified content)" output ' +test_expect_success 'status with a lot of untracked files in the submodule' ' + ( + cd sub + i=0 && + while test $i -lt 1024 + do + >some-file-$i + i=$(( $i + 1 )) + done + ) && + git status --porcelain sub 2>err.actual && + test_must_be_empty err.actual && + rm err.actual +' + test_expect_success 'rm submodule contents' ' - rm -rf sub/* sub/.git + rm -rf sub && + mkdir sub ' test_expect_success 'status clean (empty submodule dir)' ' @@ -271,4 +317,91 @@ test_expect_success 'diff --submodule with merge conflict in .gitmodules' ' test_cmp diff_submodule_actual diff_submodule_expect ' +# We'll setup different cases for further testing: +# sub1 will contain a nested submodule, +# sub2 will have an untracked file +# sub3 will have an untracked repository +test_expect_success 'setup superproject with untracked file in nested submodule' ' + ( + cd super && + git clean -dfx && + rm .gitmodules && + git submodule add -f ./sub1 && + git submodule add -f ./sub2 && + git submodule add -f ./sub1 sub3 && + git commit -a -m "messy merge in superproject" && + ( + cd sub1 && + git submodule add ../sub2 && + git commit -a -m "add sub2 to sub1" + ) && + git add sub1 && + git commit -a -m "update sub1 to contain nested sub" + ) && + echo content >super/sub1/sub2/file && + echo content >super/sub2/file && + git -C super/sub3 clone ../../sub2 untracked_repository +' + +test_expect_success 'status with untracked file in nested submodule (porcelain)' ' + git -C super status --porcelain >output && + diff output - <<-\EOF + M sub1 + M sub2 + M sub3 + EOF +' + +test_expect_success 'status with untracked file in nested submodule (porcelain=2)' ' + git -C super status --porcelain=2 >output && + sanitize_output output && + diff output - <<-\EOF + 1 .M S..U 160000 160000 160000 HASH HASH sub1 + 1 .M S..U 160000 160000 160000 HASH HASH sub2 + 1 .M S..U 160000 160000 160000 HASH HASH sub3 + EOF +' + +test_expect_success 'status with untracked file in nested submodule (short)' ' + git -C super status --short >output && + diff output - <<-\EOF + ? sub1 + ? sub2 + ? sub3 + EOF +' + +test_expect_success 'setup superproject with modified file in nested submodule' ' + git -C super/sub1/sub2 add file && + git -C super/sub2 add file +' + +test_expect_success 'status with added file in nested submodule (porcelain)' ' + git -C super status --porcelain >output && + diff output - <<-\EOF + M sub1 + M sub2 + M sub3 + EOF +' + +test_expect_success 'status with added file in nested submodule (porcelain=2)' ' + git -C super status --porcelain=2 >output && + sanitize_output output && + diff output - <<-\EOF + 1 .M S.M. 160000 160000 160000 HASH HASH sub1 + 1 .M S.M. 160000 160000 160000 HASH HASH sub2 + 1 .M S..U 160000 160000 160000 HASH HASH sub3 + EOF +' + +test_expect_success 'status with added file in nested submodule (short)' ' + git -C super status --short >output && + diff output - <<-\EOF + m sub1 + m sub2 + ? sub3 + EOF +' + test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index fb00e6d9b0..79427840a4 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -32,6 +32,17 @@ test_expect_success 'commit -h in broken repository' ' test_i18ngrep "[Uu]sage" broken/usage ' +test_expect_success 'create upstream branch' ' + git checkout -b upstream && + test_commit upstream1 && + test_commit upstream2 && + # leave the first commit on master as root because several + # tests depend on this case; for our upstream we only + # care about commit counts anyway, so a totally divergent + # history is OK + git checkout --orphan master +' + test_expect_success 'setup' ' : >tracked && : >modified && @@ -53,7 +64,9 @@ test_expect_success 'setup' ' echo 1 >dir1/modified && echo 2 >dir2/modified && echo 3 >dir2/added && - git add dir2/added + git add dir2/added && + + git branch --set-upstream-to=upstream ' test_expect_success 'status (1)' ' @@ -75,6 +88,10 @@ EOF test_expect_success 'status --column' ' cat >expect <<\EOF && # On branch master +# Your branch and '\''upstream'\'' have diverged, +# and have 1 and 2 different commits each, respectively. +# (use "git pull" to merge the remote branch into yours) +# # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # @@ -105,6 +122,10 @@ test_expect_success 'status --column status.displayCommentPrefix=false' ' cat >expect <<\EOF # On branch master +# Your branch and 'upstream' have diverged, +# and have 1 and 2 different commits each, respectively. +# (use "git pull" to merge the remote branch into yours) +# # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # @@ -178,6 +199,9 @@ test_expect_success 'commit ignores status.displayCommentPrefix=false in COMMIT_ cat >expect <<\EOF On branch master +Your branch and 'upstream' have diverged, +and have 1 and 2 different commits each, respectively. + Changes to be committed: new file: dir2/added @@ -248,6 +272,10 @@ test_expect_success 'status with gitignore' ' cat >expect <<\EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -313,6 +341,10 @@ test_expect_success 'status with gitignore (nothing untracked)' ' cat >expect <<\EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -348,7 +380,7 @@ output* EOF cat >expect <<\EOF -## master +## master...upstream [ahead 1, behind 2] M dir1/modified A dir2/added ?? dir1/untracked @@ -360,7 +392,7 @@ EOF test_expect_success 'status -s -b' ' git status -s -b >output && - test_cmp expect output + test_i18ncmp expect output ' @@ -370,7 +402,7 @@ test_expect_success 'status -s -z -b' ' git status -s -z -b >output && nul_to_q <output >output.q && mv output.q output && - test_cmp expect output + test_i18ncmp expect output ' test_expect_success 'setup dir3' ' @@ -382,6 +414,10 @@ test_expect_success 'setup dir3' ' test_expect_success 'status -uno' ' cat >expect <<EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -408,6 +444,9 @@ test_expect_success 'status (status.showUntrackedFiles no)' ' test_expect_success 'status -uno (advice.statusHints false)' ' cat >expect <<EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + Changes to be committed: new file: dir2/added @@ -439,6 +478,10 @@ test_expect_success 'status -s (status.showUntrackedFiles no)' ' test_expect_success 'status -unormal' ' cat >expect <<EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -493,6 +536,10 @@ test_expect_success 'status -s (status.showUntrackedFiles normal)' ' test_expect_success 'status -uall' ' cat >expect <<EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -552,6 +599,10 @@ test_expect_success 'status -s (status.showUntrackedFiles all)' ' test_expect_success 'status with relative paths' ' cat >expect <<\EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -610,13 +661,19 @@ test_expect_success 'status --porcelain ignores relative paths setting' ' test_expect_success 'setup unique colors' ' git config status.color.untracked blue && - git config status.color.branch green + git config status.color.branch green && + git config status.color.localBranch yellow && + git config status.color.remoteBranch cyan ' test_expect_success 'status with color.ui' ' cat >expect <<\EOF && On branch <GREEN>master<RESET> +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -675,7 +732,7 @@ test_expect_success 'status -s with color.status' ' ' cat >expect <<\EOF -## <GREEN>master<RESET> +## <YELLOW>master<RESET>...<CYAN>upstream<RESET> [ahead <YELLOW>1<RESET>, behind <CYAN>2<RESET>] <RED>M<RESET> dir1/modified <GREEN>A<RESET> dir2/added <BLUE>??<RESET> dir1/untracked @@ -687,7 +744,7 @@ EOF test_expect_success 'status -s -b with color.status' ' git status -s -b | test_decode_color >output && - test_cmp expect output + test_i18ncmp expect output ' @@ -726,7 +783,7 @@ test_expect_success 'status --porcelain respects -b' ' git status --porcelain -b >output && { - echo "## master" && + echo "## master...upstream [ahead 1, behind 2]" && cat expect } >tmp && mv tmp expect && @@ -739,6 +796,10 @@ test_expect_success 'status --porcelain respects -b' ' test_expect_success 'status without relative paths' ' cat >expect <<\EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -785,6 +846,10 @@ test_expect_success 'status -s without relative paths' ' test_expect_success 'dry-run of partial commit excluding new file in index' ' cat >expect <<EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -825,6 +890,10 @@ test_expect_success 'setup status submodule summary' ' test_expect_success 'status submodule summary is disabled by default' ' cat >expect <<EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -881,6 +950,10 @@ head=$(cd sm && git rev-parse --short=7 --verify HEAD) test_expect_success 'status submodule summary' ' cat >expect <<EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 1 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -939,6 +1012,10 @@ test_expect_success 'status -s submodule summary' ' test_expect_success 'status submodule summary (clean submodule): commit' ' cat >expect <<EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 2 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git checkout -- <file>..." to discard changes in working directory) @@ -985,6 +1062,10 @@ test_expect_success 'status -z implies porcelain' ' test_expect_success 'commit --dry-run submodule summary (--amend)' ' cat >expect <<EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 2 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD^1 <file>..." to unstage) @@ -1038,6 +1119,10 @@ touch .gitmodules test_expect_success '--ignore-submodules=untracked suppresses submodules with untracked content' ' cat > expect << EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 2 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -1146,6 +1231,10 @@ test_expect_success '.git/config ignore=dirty suppresses submodules with modifie test_expect_success "--ignore-submodules=untracked doesn't suppress submodules with modified content" ' cat > expect << EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 2 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -1202,6 +1291,10 @@ head2=$(cd sm && git commit -q -m "2nd commit" foo && git rev-parse --short=7 -- test_expect_success "--ignore-submodules=untracked doesn't suppress submodule summary" ' cat > expect << EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 2 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -1282,6 +1375,10 @@ test_expect_success ".git/config ignore=dirty doesn't suppress submodule summary cat > expect << EOF ; On branch master +; Your branch and 'upstream' have diverged, +; and have 2 and 2 different commits each, respectively. +; (use "git pull" to merge the remote branch into yours) +; ; Changes to be committed: ; (use "git reset HEAD <file>..." to unstage) ; @@ -1329,6 +1426,10 @@ test_expect_success "status (core.commentchar with two chars with submodule summ test_expect_success "--ignore-submodules=all suppresses submodule summary" ' cat > expect << EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 2 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git checkout -- <file>..." to discard changes in working directory) @@ -1353,6 +1454,10 @@ EOF test_expect_success '.gitmodules ignore=all suppresses unstaged submodule summary' ' cat > expect << EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 2 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) @@ -1472,6 +1577,10 @@ test_expect_success 'git commit --dry-run will show a staged but ignored submodu git add sm && cat >expect << EOF && On branch master +Your branch and '\''upstream'\'' have diverged, +and have 2 and 2 different commits each, respectively. + (use "git pull" to merge the remote branch into yours) + Changes to be committed: (use "git reset HEAD <file>..." to unstage) diff --git a/t/t7509-commit.sh b/t/t7509-commit.sh index db9774e345..ddef7ea6b0 100755 --- a/t/t7509-commit.sh +++ b/t/t7509-commit.sh @@ -101,7 +101,7 @@ test_expect_success '--amend option with empty author' ' echo "Empty author test" >>foo && test_tick && test_must_fail git commit -a -m "empty author" --amend 2>err && - grep "empty ident" err + test_i18ngrep "empty ident" err ' test_expect_success '--amend option with missing author' ' @@ -114,7 +114,7 @@ test_expect_success '--amend option with missing author' ' echo "Missing author test" >>foo && test_tick && test_must_fail git commit -a -m "malformed author" --amend 2>err && - grep "empty ident" err + test_i18ngrep "empty ident" err ' test_expect_success '--reset-author makes the commit ours even with --amend option' ' diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 7f09867478..668bbee73c 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -25,14 +25,14 @@ prompt_given () test_expect_success 'basic usage requires no repo' ' test_expect_code 129 git difftool -h >output && - grep ^usage: output && + test_i18ngrep ^usage: output && # create a ceiling directory to prevent Git from finding a repo mkdir -p not/repo && test_when_finished rm -r not && test_expect_code 129 \ env GIT_CEILING_DIRECTORIES="$(pwd)/not" \ git -C not/repo difftool -h >output && - grep ^usage: output + test_i18ngrep ^usage: output ' # Create a file on master and change it on branch diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index e37239e657..3457d5db64 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -139,6 +139,22 @@ test_expect_success 'submit with master branch name from argv' ' ) ' +test_expect_success 'allow submit from branch with same revision but different name' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + test_commit "file8" && + git checkout -b branch1 && + git checkout -b branch2 && + git config git-p4.skipSubmitEdit true && + git config git-p4.allowSubmit "branch1" && + test_must_fail git p4 submit && + git checkout branch1 && + git p4 submit + ) +' + # # Basic submit tests, the five handled cases # diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 5ed28135be..2cb999ecfa 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -1457,4 +1457,38 @@ test_expect_failure 'complete with tilde expansion' ' test_completion "git add ~/tmp/" "~/tmp/file" ' +test_expect_success 'setup other remote for remote reference completion' ' + git remote add other otherrepo && + git fetch other +' + +for flag in -d --delete +do + test_expect_success "__git_complete_remote_or_refspec - push $flag other" ' + sed -e "s/Z$//" >expected <<-EOF && + master-in-other Z + EOF + ( + words=(git push '$flag' other ma) && + cword=${#words[@]} cur=${words[cword-1]} && + __git_complete_remote_or_refspec && + print_comp + ) && + test_cmp expected out + ' + + test_expect_failure "__git_complete_remote_or_refspec - push other $flag" ' + sed -e "s/Z$//" >expected <<-EOF && + master-in-other Z + EOF + ( + words=(git push other '$flag' ma) && + cword=${#words[@]} cur=${words[cword-1]} && + __git_complete_remote_or_refspec && + print_comp + ) && + test_cmp expected out + ' +done + test_done diff --git a/t/test-lib.sh b/t/test-lib.sh index 13b5696822..26b3edfb2e 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -761,10 +761,15 @@ test_done () { say "1..$test_count$skip_all" fi - test -d "$remove_trash" && - cd "$(dirname "$remove_trash")" && - rm -rf "$(basename "$remove_trash")" + if test -z "$debug" + then + test -d "$TRASH_DIRECTORY" || + error "Tests passed but trash directory already removed before test cleanup; aborting" + cd "$TRASH_DIRECTORY/.." && + rm -fr "$TRASH_DIRECTORY" || + error "Tests passed but test cleanup failed; aborting" + fi test_at_end_hook_ exit 0 ;; @@ -919,7 +924,6 @@ case "$TRASH_DIRECTORY" in /*) ;; # absolute path is good *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;; esac -test ! -z "$debug" || remove_trash=$TRASH_DIRECTORY rm -fr "$TRASH_DIRECTORY" || { GIT_EXIT_OK=t echo >&5 "FATAL: Cannot prepare test area" @@ -1164,3 +1168,6 @@ build_option () { test_lazy_prereq LONG_IS_64BIT ' test 8 -le "$(build_option sizeof-long)" ' + +test_lazy_prereq TIME_IS_64BIT 'test-date is64bit' +test_lazy_prereq TIME_T_IS_64BIT 'test-date time_t-is64bit' |