diff options
Diffstat (limited to 't')
122 files changed, 3892 insertions, 529 deletions
diff --git a/t/Makefile b/t/Makefile index 8fd1a72357..43b15e36ae 100644 --- a/t/Makefile +++ b/t/Makefile @@ -13,7 +13,7 @@ TAR ?= $(TAR) RM ?= rm -f PROVE ?= prove DEFAULT_TEST_TARGET ?= test -TEST_LINT ?= test-lint-duplicates test-lint-executable +TEST_LINT ?= test-lint ifdef TEST_OUTPUT_DIRECTORY TEST_RESULTS_DIRECTORY = $(TEST_OUTPUT_DIRECTORY)/test-results @@ -29,6 +29,7 @@ TEST_RESULTS_DIRECTORY_SQ = $(subst ','\'',$(TEST_RESULTS_DIRECTORY)) T = $(sort $(wildcard t[0-9][0-9][0-9][0-9]-*.sh)) TSVN = $(sort $(wildcard t91[0-9][0-9]-*.sh)) TGITWEB = $(sort $(wildcard t95[0-9][0-9]-*.sh)) +THELPERS = $(sort $(filter-out $(T),$(wildcard *.sh))) all: $(DEFAULT_TEST_TARGET) @@ -65,7 +66,7 @@ test-lint-executable: echo >&2 "non-executable tests:" $$bad; exit 1; } test-lint-shell-syntax: - @'$(PERL_PATH_SQ)' check-non-portable-shell.pl $(T) + @'$(PERL_PATH_SQ)' check-non-portable-shell.pl $(T) $(THELPERS) aggregate-results-and-cleanup: $(T) $(MAKE) aggregate-results @@ -71,6 +71,7 @@ You can pass --verbose (or -v), --debug (or -d), and --immediate (or -i) command line argument to the test, or by setting GIT_TEST_OPTS appropriately before running "make". +-v:: --verbose:: This makes the test more verbose. Specifically, the command being run and their output if any are also @@ -81,6 +82,7 @@ appropriately before running "make". numbers matching <pattern>. The number matched against is simply the running count of the test within the file. +-d:: --debug:: This may help the person who is developing a new test. It causes the command defined with test_debug to run. @@ -89,6 +91,7 @@ appropriately before running "make". failed tests so that you can inspect its contents after the test finished. +-i:: --immediate:: This causes the test to immediately exit upon the first failed test. Cleanup commands requested with @@ -96,10 +99,17 @@ appropriately before running "make". in order to keep the state for inspection by the tester to diagnose the bug. +-l:: --long-tests:: This causes additional long-running tests to be run (where available), for more exhaustive testing. +-r:: +--run=<test-selector>:: + Run only the subset of tests indicated by + <test-selector>. See section "Skipping Tests" below for + <test-selector> syntax. + --valgrind=<tool>:: Execute all Git binaries under valgrind tool <tool> and exit with status 126 on errors (just like regular tests, this will @@ -187,10 +197,77 @@ and either can match the "t[0-9]{4}" part to skip the whole test, or t[0-9]{4} followed by ".$number" to say which particular test to skip. -Note that some tests in the existing test suite rely on previous -test item, so you cannot arbitrarily disable one and expect the -remainder of test to check what the test originally was intended -to check. +For an individual test suite --run could be used to specify that +only some tests should be run or that some tests should be +excluded from a run. + +The argument for --run is a list of individual test numbers or +ranges with an optional negation prefix that define what tests in +a test suite to include in the run. A range is two numbers +separated with a dash and matches a range of tests with both ends +been included. You may omit the first or the second number to +mean "from the first test" or "up to the very last test" +respectively. + +Optional prefix of '!' means that the test or a range of tests +should be excluded from the run. + +If --run starts with an unprefixed number or range the initial +set of tests to run is empty. If the first item starts with '!' +all the tests are added to the initial set. After initial set is +determined every test number or range is added or excluded from +the set one by one, from left to right. + +Individual numbers or ranges could be separated either by a space +or a comma. + +For example, to run only tests up to a specific test (21), one +could do this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='1-21' + +or this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='-21' + +Common case is to run several setup tests (1, 2, 3) and then a +specific test (21) that relies on that setup: + + $ sh ./t9200-git-cvsexport-commit.sh --run='1 2 3 21' + +or: + + $ sh ./t9200-git-cvsexport-commit.sh --run=1,2,3,21 + +or: + + $ sh ./t9200-git-cvsexport-commit.sh --run='-3 21' + +As noted above, the test set is built going though items left to +right, so this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='1-4 !3' + +will run tests 1, 2, and 4. Items that comes later have higher +precendence. It means that this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='!3 1-4' + +would just run tests from 1 to 4, including 3. + +You may use negation with ranges. The following will run all +test in the test suite except from 7 up to 11: + + $ sh ./t9200-git-cvsexport-commit.sh --run='!7-11' + +Some tests in a test suite rely on the previous tests performing +certain actions, specifically some tests are designated as +"setup" test, so you cannot _arbitrarily_ disable one test and +expect the rest to function correctly. + +--run is mostly useful when you want to focus on a specific test +and know what setup is needed for it. Or when you want to run +everything up to a certain test. Naming Tests @@ -596,6 +673,27 @@ library for your script to use. ... ' + - test_write_lines <lines> + + Write <lines> on standard output, one line per argument. + Useful to prepare multi-line files in a compact form. + + Example: + + test_write_lines a b c d e f g >foo + + Is a more compact equivalent of: + cat >foo <<-EOF + a + b + c + d + e + f + g + EOF + + - test_pause This command is useful for writing and debugging tests and must be diff --git a/t/annotate-tests.sh b/t/annotate-tests.sh index 304c7b7d87..071e4d7d3e 100644 --- a/t/annotate-tests.sh +++ b/t/annotate-tests.sh @@ -1,6 +1,17 @@ # This file isn't used as a test script directly, instead it is # sourced from t8001-annotate.sh and t8002-blame.sh. +if test_have_prereq MINGW +then + sanitize_L () { + echo "$1" | sed 'sX\(^-L\|,\)\^\?/X&\\;*Xg' + } +else + sanitize_L () { + echo "$1" + } +fi + check_count () { head= && file='file' && @@ -10,6 +21,7 @@ check_count () { case "$1" in -h) head="$2"; shift; shift ;; -f) file="$2"; shift; shift ;; + -L*) options="$options $(sanitize_L "$1")"; shift ;; -*) options="$options $1"; shift ;; *) break ;; esac diff --git a/t/check-non-portable-shell.pl b/t/check-non-portable-shell.pl index 45971f43b7..b170cbc045 100755 --- a/t/check-non-portable-shell.pl +++ b/t/check-non-portable-shell.pl @@ -16,12 +16,12 @@ sub err { while (<>) { chomp; - /^\s*sed\s+-i/ and err 'sed -i is not portable'; - /^\s*echo\s+-n/ and err 'echo -n is not portable (please use printf)'; + /\bsed\s+-i/ and err 'sed -i is not portable'; + /\becho\s+-n/ and err 'echo -n is not portable (please use printf)'; /^\s*declare\s+/ and err 'arrays/declare not portable'; /^\s*[^#]\s*which\s/ and err 'which is not portable (please use type)'; - /test\s+[^=]*==/ and err '"test a == b" is not portable (please use =)'; - /^\s*export\s+[^=]*=/ and err '"export FOO=bar" is not portable (please use FOO=bar && export FOO)'; + /\btest\s+[^=]*==/ and err '"test a == b" is not portable (please use =)'; + /\bexport\s+[A-Za-z0-9_]*=/ and err '"export FOO=bar" is not portable (please use FOO=bar && export FOO)'; # this resets our $. for each file close ARGV if eof; } diff --git a/t/lib-credential.sh b/t/lib-credential.sh index 957ae936e8..9e7d7962b0 100755 --- a/t/lib-credential.sh +++ b/t/lib-credential.sh @@ -281,7 +281,7 @@ helper_test_timeout() { cat >askpass <<\EOF #!/bin/sh echo >&2 askpass: $* -what=`echo $1 | cut -d" " -f1 | tr A-Z a-z | tr -cd a-z` +what=$(echo $1 | cut -d" " -f1 | tr A-Z a-z | tr -cd a-z) echo "askpass-$what" EOF chmod +x askpass diff --git a/t/lib-cvs.sh b/t/lib-cvs.sh index 5076718916..9b2bcfb1b0 100644 --- a/t/lib-cvs.sh +++ b/t/lib-cvs.sh @@ -13,7 +13,7 @@ fi CVS="cvs -f" export CVS -cvsps_version=`cvsps -h 2>&1 | sed -ne 's/cvsps version //p'` +cvsps_version=$(cvsps -h 2>&1 | sed -ne 's/cvsps version //p') case "$cvsps_version" in 2.1 | 2.2*) ;; diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index 05824fa8e4..fd499e7c49 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -1,6 +1,6 @@ #!/bin/sh -gpg_version=`gpg --version 2>&1` +gpg_version=$(gpg --version 2>&1) if test $? = 127; then say "You do not seem to have gpg installed" else diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index 252cbf163b..fd53b57187 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -37,6 +37,11 @@ then test_done fi +if ! test_have_prereq SANITY; then + test_skip_or_die $GIT_TEST_HTTPD \ + "Cannot run httpd tests as root" +fi + HTTPD_PARA="" for DEFAULT_HTTPD_PATH in '/usr/sbin/httpd' '/usr/sbin/apache2' @@ -105,10 +110,15 @@ else "Could not identify web server at '$LIB_HTTPD_PATH'" fi +install_script () { + write_script "$HTTPD_ROOT_PATH/$1" <"$TEST_PATH/$1" +} + prepare_httpd() { mkdir -p "$HTTPD_DOCUMENT_ROOT_PATH" cp "$TEST_PATH"/passwd "$HTTPD_ROOT_PATH" - cp "$TEST_PATH"/broken-smart-http.sh "$HTTPD_ROOT_PATH" + install_script broken-smart-http.sh + install_script error.sh ln -s "$LIB_HTTPD_MODULE_PATH" "$HTTPD_ROOT_PATH/modules" @@ -132,7 +142,7 @@ prepare_httpd() { HTTPD_URL_USER=$HTTPD_PROTO://user%40host@$HTTPD_DEST HTTPD_URL_USER_PASS=$HTTPD_PROTO://user%40host:pass%40host@$HTTPD_DEST - if test -n "$LIB_HTTPD_DAV" -o -n "$LIB_HTTPD_SVN" + if test -n "$LIB_HTTPD_DAV" || test -n "$LIB_HTTPD_SVN" then HTTPD_PARA="$HTTPD_PARA -DDAV" diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 3a03e8263d..b384d79935 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -97,12 +97,16 @@ Alias /auth/dumb/ www/auth/dumb/ </LocationMatch> ScriptAliasMatch /smart_*[^/]*/(.*) ${GIT_EXEC_PATH}/git-http-backend/$1 ScriptAlias /broken_smart/ broken-smart-http.sh/ +ScriptAlias /error/ error.sh/ <Directory ${GIT_EXEC_PATH}> Options FollowSymlinks </Directory> <Files broken-smart-http.sh> Options ExecCGI </Files> +<Files error.sh> + Options ExecCGI +</Files> <Files ${GIT_EXEC_PATH}/git-http-backend> Options ExecCGI </Files> diff --git a/t/lib-httpd/broken-smart-http.sh b/t/lib-httpd/broken-smart-http.sh index f7ebfffa80..82cc610b0a 100755..100644 --- a/t/lib-httpd/broken-smart-http.sh +++ b/t/lib-httpd/broken-smart-http.sh @@ -1,4 +1,3 @@ -#!/bin/sh printf "Content-Type: text/%s\n" "html" echo printf "%s\n" "001e# service=git-upload-pack" diff --git a/t/lib-httpd/error.sh b/t/lib-httpd/error.sh new file mode 100755 index 0000000000..a77b8e5469 --- /dev/null +++ b/t/lib-httpd/error.sh @@ -0,0 +1,31 @@ +#!/bin/sh + +printf "Status: 500 Intentional Breakage\n" + +printf "Content-Type: " +charset=iso-8859-1 +case "$PATH_INFO" in +*html*) + printf "text/html" + ;; +*text*) + printf "text/plain" + ;; +*charset*) + printf "text/plain; charset=utf-8" + charset=utf-8 + ;; +*utf16*) + printf "text/plain; charset=utf-16" + charset=utf-16 + ;; +*odd-spacing*) + printf "text/plain; foo=bar ;charset=utf-16; other=nonsense" + charset=utf-16 + ;; +esac +printf "\n" + +printf "\n" +printf "this is the error message\n" | +iconv -f us-ascii -t $charset diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh new file mode 100755 index 0000000000..79cdd34a54 --- /dev/null +++ b/t/lib-submodule-update.sh @@ -0,0 +1,680 @@ +# Create a submodule layout used for all tests below. +# +# The following use cases are covered: +# - New submodule (no_submodule => add_sub1) +# - Removed submodule (add_sub1 => remove_sub1) +# - Updated submodule (add_sub1 => modify_sub1) +# - Submodule updated to invalid commit (add_sub1 => invalid_sub1) +# - Submodule updated from invalid commit (invalid_sub1 => valid_sub1) +# - Submodule replaced by tracked files in directory (add_sub1 => +# replace_sub1_with_directory) +# - Directory containing tracked files replaced by submodule +# (replace_sub1_with_directory => replace_directory_with_sub1) +# - Submodule replaced by tracked file with the same name (add_sub1 => +# replace_sub1_with_file) +# - Tracked file replaced by submodule (replace_sub1_with_file => +# replace_file_with_sub1) +# +# --O-----O +# / ^ replace_directory_with_sub1 +# / replace_sub1_with_directory +# /----O +# / ^ +# / modify_sub1 +# O------O-------O +# ^ ^\ ^ +# | | \ remove_sub1 +# | | -----O-----O +# | | \ ^ replace_file_with_sub1 +# | | \ replace_sub1_with_file +# | add_sub1 --O-----O +# no_submodule ^ valid_sub1 +# invalid_sub1 +# +create_lib_submodule_repo () { + git init submodule_update_repo && + ( + cd submodule_update_repo && + echo "expect" >>.gitignore && + echo "actual" >>.gitignore && + echo "x" >file1 && + echo "y" >file2 && + git add .gitignore file1 file2 && + git commit -m "Base" && + git branch "no_submodule" && + + git checkout -b "add_sub1" && + git submodule add ./. sub1 && + git config -f .gitmodules submodule.sub1.ignore all && + git config submodule.sub1.ignore all && + git add .gitmodules && + git commit -m "Add sub1" && + git checkout -b remove_sub1 && + git revert HEAD && + + git checkout -b "modify_sub1" "add_sub1" && + git submodule update && + ( + cd sub1 && + git fetch && + git checkout -b "modifications" && + echo "z" >file2 && + echo "x" >file3 && + git add file2 file3 && + git commit -m "modified file2 and added file3" && + git push origin modifications + ) && + git add sub1 && + git commit -m "Modify sub1" && + + git checkout -b "replace_sub1_with_directory" "add_sub1" && + git submodule update && + ( + cd sub1 && + git checkout modifications + ) && + git rm --cached sub1 && + rm sub1/.git* && + git config -f .gitmodules --remove-section "submodule.sub1" && + git add .gitmodules sub1/* && + git commit -m "Replace sub1 with directory" && + git checkout -b replace_directory_with_sub1 && + git revert HEAD && + + git checkout -b "replace_sub1_with_file" "add_sub1" && + git rm sub1 && + echo "content" >sub1 && + git add sub1 && + git commit -m "Replace sub1 with file" && + git checkout -b replace_file_with_sub1 && + git revert HEAD && + + git checkout -b "invalid_sub1" "add_sub1" && + git update-index --cacheinfo 160000 0123456789012345678901234567890123456789 sub1 && + git commit -m "Invalid sub1 commit" && + git checkout -b valid_sub1 && + git revert HEAD && + git checkout master + ) +} + +# Helper function to replace gitfile with .git directory +replace_gitfile_with_git_dir () { + ( + cd "$1" && + git_dir="$(git rev-parse --git-dir)" && + rm -f .git && + cp -R "$git_dir" .git && + GIT_WORK_TREE=. git config --unset core.worktree + ) +} + +# Test that the .git directory in the submodule is unchanged (except for the +# core.worktree setting, which appears only in $GIT_DIR/modules/$1/config). +# Call this function before test_submodule_content as the latter might +# write the index file leading to false positive index differences. +# +# Note that this only supports submodules at the root level of the +# superproject, with the default name, i.e. same as its path. +test_git_directory_is_unchanged () { + ( + cd ".git/modules/$1" && + # does core.worktree point at the right place? + test "$(git config core.worktree)" = "../../../$1" && + # remove it temporarily before comparing, as + # "$1/.git/config" lacks it... + git config --unset core.worktree + ) && + diff -r ".git/modules/$1" "$1/.git" && + ( + # ... and then restore. + cd ".git/modules/$1" && + git config core.worktree "../../../$1" + ) +} + +# Helper function to be executed at the start of every test below, it sets up +# the submodule repo if it doesn't exist and configures the most problematic +# settings for diff.ignoreSubmodules. +prolog () { + (test -d submodule_update_repo || create_lib_submodule_repo) && + test_config_global diff.ignoreSubmodules all && + test_config diff.ignoreSubmodules all +} + +# Helper function to bring work tree back into the state given by the +# commit. This includes trying to populate sub1 accordingly if it exists and +# should be updated to an existing commit. +reset_work_tree_to () { + rm -rf submodule_update && + git clone submodule_update_repo submodule_update && + ( + cd submodule_update && + rm -rf sub1 && + git checkout -f "$1" && + git status -u -s >actual && + test_must_be_empty actual && + sha1=$(git rev-parse --revs-only HEAD:sub1) && + if test -n "$sha1" && + test $(cd "sub1" && git rev-parse --verify "$sha1^{commit}") + then + git submodule update --init --recursive "sub1" + fi + ) +} + +# Test that the superproject contains the content according to commit "$1" +# (the work tree must match the index for everything but submodules but the +# index must exactly match the given commit including any submodule SHA-1s). +test_superproject_content () { + git diff-index --cached "$1" >actual && + test_must_be_empty actual && + git diff-files --ignore-submodules >actual && + test_must_be_empty actual +} + +# Test that the given submodule at path "$1" contains the content according +# to the submodule commit recorded in the superproject's commit "$2" +test_submodule_content () { + if test $# != 2 + then + echo "test_submodule_content needs two arguments" + return 1 + fi && + submodule="$1" && + commit="$2" && + test -d "$submodule"/ && + if ! test -f "$submodule"/.git && ! test -d "$submodule"/.git + then + echo "Submodule $submodule is not populated" + return 1 + fi && + sha1=$(git rev-parse --verify "$commit:$submodule") && + if test -z "$sha1" + then + echo "Couldn't retrieve SHA-1 of $submodule for $commit" + return 1 + fi && + ( + cd "$submodule" && + git status -u -s >actual && + test_must_be_empty actual && + git diff "$sha1" >actual && + test_must_be_empty actual + ) +} + +# Test that the following transitions are correctly handled: +# - Updated submodule +# - New submodule +# - Removed submodule +# - Directory containing tracked files replaced by submodule +# - Submodule replaced by tracked files in directory +# - Submodule replaced by tracked file with the same name +# - tracked file replaced by submodule +# +# The default is that submodule contents aren't changed until "git submodule +# update" is run. And even then that command doesn't delete the work tree of +# a removed submodule. +# +# Removing a submodule containing a .git directory must fail even when forced +# to protect the history! +# + +# Test that submodule contents are currently not updated when switching +# between commits that change a submodule. +test_submodule_switch () { + command="$1" + ######################### Appearing submodule ######################### + # Switching to a commit letting a submodule appear creates empty dir ... + if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1 + then + # Restoring stash fails to restore submodule index entry + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: added submodule creates empty directory" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... and doesn't care if it already exists ... + test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + mkdir sub1 && + git branch -t add_sub1 origin/add_sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... unless there is an untracked file in its place. + test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + >sub1 && + test_must_fail $command add_sub1 && + test_superproject_content origin/no_submodule && + test_must_be_empty sub1 + ) + ' + # Replacing a tracked file with a submodule produces an empty + # directory ... + test_expect_$RESULT "$command: replace tracked file with submodule creates empty directory" ' + prolog && + reset_work_tree_to replace_sub1_with_file && + ( + cd submodule_update && + git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && + $command replace_file_with_sub1 && + test_superproject_content origin/replace_file_with_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/replace_file_with_sub1 + ) + ' + # ... as does removing a directory with tracked files with a + # submodule. + if test "$KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR" = 1 + then + # Non fast-forward merges fail with "Directory sub1 doesn't + # exist. sub1" because the empty submodule directory is not + # created + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: replace directory with submodule" ' + prolog && + reset_work_tree_to replace_sub1_with_directory && + ( + cd submodule_update && + git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && + $command replace_directory_with_sub1 && + test_superproject_content origin/replace_directory_with_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/replace_directory_with_sub1 + ) + ' + + ######################## Disappearing submodule ####################### + # Removing a submodule doesn't remove its work tree ... + if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1 + then + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: removed submodule leaves submodule directory and its contents in place" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t remove_sub1 origin/remove_sub1 && + $command remove_sub1 && + test_superproject_content origin/remove_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... especially when it contains a .git directory. + test_expect_$RESULT "$command: removed submodule leaves submodule containing a .git directory alone" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t remove_sub1 origin/remove_sub1 && + replace_gitfile_with_git_dir sub1 && + $command remove_sub1 && + test_superproject_content origin/remove_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Replacing a submodule with files in a directory must fail as the + # submodule work tree isn't removed ... + if test "$KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES" = 1 + then + # Non fast-forward merges attempt to merge the former + # submodule files with the newly checked out ones in the + # directory of the same name while it shouldn't. + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: replace submodule with a directory must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && + test_must_fail $command replace_sub1_with_directory && + test_superproject_content origin/add_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... especially when it contains a .git directory. + test_expect_$RESULT "$command: replace submodule containing a .git directory with a directory must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && + replace_gitfile_with_git_dir sub1 && + test_must_fail $command replace_sub1_with_directory && + test_superproject_content origin/add_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Replacing it with a file must fail as it could throw away any local + # work tree changes ... + test_expect_failure "$command: replace submodule with a file must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_file origin/replace_sub1_with_file && + test_must_fail $command replace_sub1_with_file && + test_superproject_content origin/add_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... or even destroy unpushed parts of submodule history if that + # still uses a .git directory. + test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_file origin/replace_sub1_with_file && + replace_gitfile_with_git_dir sub1 && + test_must_fail $command replace_sub1_with_file && + test_superproject_content origin/add_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + + ########################## Modified submodule ######################### + # Updating a submodule sha1 doesn't update the submodule's work tree + if test "$KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT" = 1 + then + # When cherry picking a SHA-1 update for an ignored submodule + # the commit incorrectly fails with "The previous cherry-pick + # is now empty, possibly due to conflict resolution." + RESULT="failure" + else + RESULT="success" + fi + test_expect_$RESULT "$command: modified submodule does not update submodule work tree" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t modify_sub1 origin/modify_sub1 && + $command modify_sub1 && + test_superproject_content origin/modify_sub1 && + test_submodule_content sub1 origin/add_sub1 && + git submodule update && + test_submodule_content sub1 origin/modify_sub1 + ) + ' + + # Updating a submodule to an invalid sha1 doesn't update the + # submodule's work tree, subsequent update will fail + test_expect_$RESULT "$command: modified submodule does not update submodule work tree to invalid commit" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t invalid_sub1 origin/invalid_sub1 && + $command invalid_sub1 && + test_superproject_content origin/invalid_sub1 && + test_submodule_content sub1 origin/add_sub1 && + test_must_fail git submodule update && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Updating a submodule from an invalid sha1 doesn't update the + # submodule's work tree, subsequent update will succeed + test_expect_$RESULT "$command: modified submodule does not update submodule work tree from invalid commit" ' + prolog && + reset_work_tree_to invalid_sub1 && + ( + cd submodule_update && + git branch -t valid_sub1 origin/valid_sub1 && + $command valid_sub1 && + test_superproject_content origin/valid_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/valid_sub1 + ) + ' +} + +# Test that submodule contents are currently not updated when switching +# between commits that change a submodule, but throwing away local changes in +# the superproject is allowed. +test_submodule_forced_switch () { + command="$1" + ######################### Appearing submodule ######################### + # Switching to a commit letting a submodule appear creates empty dir ... + test_expect_success "$command: added submodule creates empty directory" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... and doesn't care if it already exists ... + test_expect_success "$command: added submodule leaves existing empty directory alone" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + mkdir sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... unless there is an untracked file in its place. + test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" ' + prolog && + reset_work_tree_to no_submodule && + ( + cd submodule_update && + git branch -t add_sub1 origin/add_sub1 && + >sub1 && + $command add_sub1 && + test_superproject_content origin/add_sub1 && + test_dir_is_empty sub1 + ) + ' + # Replacing a tracked file with a submodule produces an empty + # directory ... + test_expect_success "$command: replace tracked file with submodule creates empty directory" ' + prolog && + reset_work_tree_to replace_sub1_with_file && + ( + cd submodule_update && + git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 && + $command replace_file_with_sub1 && + test_superproject_content origin/replace_file_with_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/replace_file_with_sub1 + ) + ' + # ... as does removing a directory with tracked files with a + # submodule. + test_expect_success "$command: replace directory with submodule" ' + prolog && + reset_work_tree_to replace_sub1_with_directory && + ( + cd submodule_update && + git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 && + $command replace_directory_with_sub1 && + test_superproject_content origin/replace_directory_with_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/replace_directory_with_sub1 + ) + ' + + ######################## Disappearing submodule ####################### + # Removing a submodule doesn't remove its work tree ... + test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t remove_sub1 origin/remove_sub1 && + $command remove_sub1 && + test_superproject_content origin/remove_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... especially when it contains a .git directory. + test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t remove_sub1 origin/remove_sub1 && + replace_gitfile_with_git_dir sub1 && + $command remove_sub1 && + test_superproject_content origin/remove_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Replacing a submodule with files in a directory must fail as the + # submodule work tree isn't removed ... + test_expect_failure "$command: replace submodule with a directory must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && + test_must_fail $command replace_sub1_with_directory && + test_superproject_content origin/add_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... especially when it contains a .git directory. + test_expect_failure "$command: replace submodule containing a .git directory with a directory must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory && + replace_gitfile_with_git_dir sub1 && + test_must_fail $command replace_sub1_with_directory && + test_superproject_content origin/add_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Replacing it with a file must fail as it could throw away any local + # work tree changes ... + test_expect_failure "$command: replace submodule with a file must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_file origin/replace_sub1_with_file && + test_must_fail $command replace_sub1_with_file && + test_superproject_content origin/add_sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # ... or even destroy unpushed parts of submodule history if that + # still uses a .git directory. + test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t replace_sub1_with_file origin/replace_sub1_with_file && + replace_gitfile_with_git_dir sub1 && + test_must_fail $command replace_sub1_with_file && + test_superproject_content origin/add_sub1 && + test_git_directory_is_unchanged sub1 && + test_submodule_content sub1 origin/add_sub1 + ) + ' + + ########################## Modified submodule ######################### + # Updating a submodule sha1 doesn't update the submodule's work tree + test_expect_success "$command: modified submodule does not update submodule work tree" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t modify_sub1 origin/modify_sub1 && + $command modify_sub1 && + test_superproject_content origin/modify_sub1 && + test_submodule_content sub1 origin/add_sub1 && + git submodule update && + test_submodule_content sub1 origin/modify_sub1 + ) + ' + # Updating a submodule to an invalid sha1 doesn't update the + # submodule's work tree, subsequent update will fail + test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" ' + prolog && + reset_work_tree_to add_sub1 && + ( + cd submodule_update && + git branch -t invalid_sub1 origin/invalid_sub1 && + $command invalid_sub1 && + test_superproject_content origin/invalid_sub1 && + test_submodule_content sub1 origin/add_sub1 && + test_must_fail git submodule update && + test_submodule_content sub1 origin/add_sub1 + ) + ' + # Updating a submodule from an invalid sha1 doesn't update the + # submodule's work tree, subsequent update will succeed + test_expect_success "$command: modified submodule does not update submodule work tree from invalid commit" ' + prolog && + reset_work_tree_to invalid_sub1 && + ( + cd submodule_update && + git branch -t valid_sub1 origin/valid_sub1 && + $command valid_sub1 && + test_superproject_content origin/valid_sub1 && + test_dir_is_empty sub1 && + git submodule update --init --recursive && + test_submodule_content sub1 origin/valid_sub1 + ) + ' +} diff --git a/t/perf/p5302-pack-index.sh b/t/perf/p5302-pack-index.sh index 6cb5b0d55b..5ee9211f98 100755 --- a/t/perf/p5302-pack-index.sh +++ b/t/perf/p5302-pack-index.sh @@ -8,7 +8,7 @@ test_perf_large_repo test_expect_success 'repack' ' git repack -ad && - PACK=`ls .git/objects/pack/*.pack | head -n1` && + PACK=$(ls .git/objects/pack/*.pack | head -n1) && test -f "$PACK" && export PACK ' diff --git a/t/perf/p5310-pack-bitmaps.sh b/t/perf/p5310-pack-bitmaps.sh index 685d46f8b7..f8ed8573b7 100755 --- a/t/perf/p5310-pack-bitmaps.sh +++ b/t/perf/p5310-pack-bitmaps.sh @@ -8,6 +8,9 @@ test_perf_large_repo # note that we do everything through config, # since we want to be able to compare bitmap-aware # git versus non-bitmap git +# +# We intentionally use the deprecated pack.writebitmaps +# config so that we can test against older versions of git. test_expect_success 'setup bitmap config' ' git config pack.writebitmaps true && git config pack.writebitmaphashcache true diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index a2bb63ce8e..f10ba4a01e 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -42,9 +42,9 @@ test_expect_success 'success is reported like this' ' : ' -run_sub_test_lib_test () { - name="$1" descr="$2" # stdin is the body of the test code - shift 2 +_run_sub_test_lib_test_common () { + neg="$1" name="$2" descr="$3" # stdin is the body of the test code + shift 3 mkdir "$name" && ( # Pretend we're not running under a test harness, whether we @@ -70,10 +70,23 @@ run_sub_test_lib_test () { export TEST_DIRECTORY && TEST_OUTPUT_DIRECTORY=$(pwd) && export TEST_OUTPUT_DIRECTORY && - ./"$name.sh" "$@" >out 2>err + if test -z "$neg" + then + ./"$name.sh" "$@" >out 2>err + else + ! ./"$name.sh" "$@" >out 2>err + fi ) } +run_sub_test_lib_test () { + _run_sub_test_lib_test_common '' "$@" +} + +run_sub_test_lib_test_err () { + _run_sub_test_lib_test_common '!' "$@" +} + check_sub_test_lib_test () { name="$1" # stdin is the expected output from the test ( @@ -84,6 +97,18 @@ check_sub_test_lib_test () { ) } +check_sub_test_lib_test_err () { + name="$1" # stdin is the expected output output from the test + # expected error output is in descriptior 3 + ( + cd "$name" && + sed -e 's/^> //' -e 's/Z$//' >expect.out && + test_cmp expect.out out && + sed -e 's/^> //' -e 's/Z$//' <&3 >expect.err && + test_cmp expect.err err + ) +} + test_expect_success 'pretend we have a fully passing test suite' " run_sub_test_lib_test full-pass '3 passing tests' <<-\\EOF && for i in 1 2 3 @@ -270,6 +295,398 @@ test_expect_success 'test --verbose-only' ' EOF ' +test_expect_success 'GIT_SKIP_TESTS' " + ( + GIT_SKIP_TESTS='git.2' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-basic \ + 'GIT_SKIP_TESTS' <<-\\EOF && + for i in 1 2 3 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-basic <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) + > ok 3 - passing test #3 + > # passed all 3 test(s) + > 1..3 + EOF + ) +" + +test_expect_success 'GIT_SKIP_TESTS several tests' " + ( + GIT_SKIP_TESTS='git.2 git.5' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-several \ + 'GIT_SKIP_TESTS several tests' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-several <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) + > ok 3 - passing test #3 + > ok 4 - passing test #4 + > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF + ) +" + +test_expect_success 'GIT_SKIP_TESTS sh pattern' " + ( + GIT_SKIP_TESTS='git.[2-5]' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-sh-pattern \ + 'GIT_SKIP_TESTS sh pattern' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-sh-pattern <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) + > ok 3 # skip passing test #3 (GIT_SKIP_TESTS) + > ok 4 # skip passing test #4 (GIT_SKIP_TESTS) + > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF + ) +" + +test_expect_success '--run basic' " + run_sub_test_lib_test run-basic \ + '--run basic' --run='1 3 5' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-basic <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (--run) + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with a range' " + run_sub_test_lib_test run-range \ + '--run with a range' --run='1-3' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-range <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 # skip passing test #5 (--run) + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with two ranges' " + run_sub_test_lib_test run-two-ranges \ + '--run with two ranges' --run='1-2 5-6' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-two-ranges <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with a left open range' " + run_sub_test_lib_test run-left-open-range \ + '--run with a left open range' --run='-3' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-left-open-range <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 # skip passing test #5 (--run) + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with a right open range' " + run_sub_test_lib_test run-right-open-range \ + '--run with a right open range' --run='4-' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-right-open-range <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 # skip passing test #2 (--run) + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with basic negation' " + run_sub_test_lib_test run-basic-neg \ + '--run with basic negation' --run='"'!3'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-basic-neg <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with two negations' " + run_sub_test_lib_test run-two-neg \ + '--run with two negations' --run='"'!3 !6'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-two-neg <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run a range and negation' " + run_sub_test_lib_test run-range-and-neg \ + '--run a range and negation' --run='"'-4 !2'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-range-and-neg <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (--run) + > ok 3 - passing test #3 + > ok 4 - passing test #4 + > ok 5 # skip passing test #5 (--run) + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run range negation' " + run_sub_test_lib_test run-range-neg \ + '--run range negation' --run='"'!1-3'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-range-neg <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 # skip passing test #2 (--run) + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run include, exclude and include' " + run_sub_test_lib_test run-inc-neg-inc \ + '--run include, exclude and include' \ + --run='"'1-5 !1-3 2'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-inc-neg-inc <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run include, exclude and include, comma separated' " + run_sub_test_lib_test run-inc-neg-inc-comma \ + '--run include, exclude and include, comma separated' \ + --run=1-5,\!1-3,2 <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-inc-neg-inc-comma <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run exclude and include' " + run_sub_test_lib_test run-neg-inc \ + '--run exclude and include' \ + --run='"'!3- 5'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-neg-inc <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run empty selectors' " + run_sub_test_lib_test run-empty-sel \ + '--run empty selectors' \ + --run='1,,3,,,5' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-empty-sel <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (--run) + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run invalid range start' " + run_sub_test_lib_test_err run-inv-range-start \ + '--run invalid range start' \ + --run='a-5' <<-\\EOF && + test_expect_success \"passing test #1\" 'true' + test_done + EOF + check_sub_test_lib_test_err run-inv-range-start \ + <<-\\EOF_OUT 3<<-\\EOF_ERR + > FATAL: Unexpected exit with code 1 + EOF_OUT + > error: --run: invalid non-numeric in range start: 'a-5' + EOF_ERR +" + +test_expect_success '--run invalid range end' " + run_sub_test_lib_test_err run-inv-range-end \ + '--run invalid range end' \ + --run='1-z' <<-\\EOF && + test_expect_success \"passing test #1\" 'true' + test_done + EOF + check_sub_test_lib_test_err run-inv-range-end \ + <<-\\EOF_OUT 3<<-\\EOF_ERR + > FATAL: Unexpected exit with code 1 + EOF_OUT + > error: --run: invalid non-numeric in range end: '1-z' + EOF_ERR +" + +test_expect_success '--run invalid selector' " + run_sub_test_lib_test_err run-inv-selector \ + '--run invalid selector' \ + --run='1?' <<-\\EOF && + test_expect_success \"passing test #1\" 'true' + test_done + EOF + check_sub_test_lib_test_err run-inv-selector \ + <<-\\EOF_OUT 3<<-\\EOF_ERR + > FATAL: Unexpected exit with code 1 + EOF_OUT + > error: --run: invalid non-numeric in test selector: '1?' + EOF_ERR +" + + test_set_prereq HAVEIT haveit=no test_expect_success HAVEIT 'test runs if prerequisite is satisfied' ' diff --git a/t/t0001-init.sh b/t/t0001-init.sh index bbc9cb60dd..e62c0ffbc2 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -56,7 +56,7 @@ test_expect_success 'plain through aliased command, outside any git repo' ' check_config plain-aliased/.git false unset ' -test_expect_failure 'plain nested through aliased command' ' +test_expect_success 'plain nested through aliased command' ' ( git init plain-ancestor-aliased && cd plain-ancestor-aliased && @@ -68,7 +68,7 @@ test_expect_failure 'plain nested through aliased command' ' check_config plain-ancestor-aliased/plain-nested/.git false unset ' -test_expect_failure 'plain nested in bare through aliased command' ' +test_expect_success 'plain nested in bare through aliased command' ' ( git init --bare bare-ancestor-aliased.git && cd bare-ancestor-aliased.git && @@ -185,14 +185,14 @@ test_expect_success 'init --bare/--shared overrides system/global config' ' git init --bare --shared=0666 init-bare-shared-override && check_config init-bare-shared-override true unset && test x0666 = \ - x`git config -f init-bare-shared-override/config core.sharedRepository` + x$(git config -f init-bare-shared-override/config core.sharedRepository) ' test_expect_success 'init honors global core.sharedRepository' ' test_config_global core.sharedRepository 0666 && git init shared-honor-global && test x0666 = \ - x`git config -f shared-honor-global/.git/config core.sharedRepository` + x$(git config -f shared-honor-global/.git/config core.sharedRepository) ' test_expect_success 'init rejects insanely long --template' ' @@ -285,7 +285,7 @@ test_expect_success 'init prefers command line to GIT_DIR' ' test_expect_success 'init with separate gitdir' ' rm -rf newdir && git init --separate-git-dir realgitdir newdir && - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected newdir/.git && test_path_is_dir realgitdir/refs ' @@ -299,7 +299,7 @@ test_expect_success 're-init to update git link' ' cd newdir && git init --separate-git-dir ../surrealgitdir ) && - echo "gitdir: `pwd`/surrealgitdir" >expected && + echo "gitdir: $(pwd)/surrealgitdir" >expected && test_cmp expected newdir/.git && test_path_is_dir surrealgitdir/refs && test_path_is_missing realgitdir/refs @@ -312,7 +312,7 @@ test_expect_success 're-init to move gitdir' ' cd newdir && git init --separate-git-dir ../realgitdir ) && - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected newdir/.git && test_path_is_dir realgitdir/refs ' @@ -326,7 +326,7 @@ test_expect_success SYMLINKS 're-init to move gitdir symlink' ' ln -s here .git && git init --separate-git-dir ../realgitdir ) && - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected newdir/.git && test_cmp expected newdir/here && test_path_is_dir realgitdir/refs diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index 39e55a13c8..8dc6939b90 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -806,7 +806,7 @@ test_expect_success !MINGW 'quoting allows trailing whitespace' ' test_cmp err.expect err ' -test_expect_success NOT_MINGW,NOT_CYGWIN 'correct handling of backslashes' ' +test_expect_success !MINGW,!CYGWIN 'correct handling of backslashes' ' rm -rf whitespace && mkdir whitespace && >"whitespace/trailing 1 " && diff --git a/t/t0010-racy-git.sh b/t/t0010-racy-git.sh index e45a9e40e4..5657c5a87b 100755 --- a/t/t0010-racy-git.sh +++ b/t/t0010-racy-git.sh @@ -14,7 +14,7 @@ do git update-index --add infocom echo xyzzy >infocom - files=`git diff-files -p` + files=$(git diff-files -p) test_expect_success \ "Racy GIT trial #$trial part A" \ 'test "" != "$files"' @@ -23,7 +23,7 @@ do echo xyzzy >cornerstone git update-index --add cornerstone - files=`git diff-files -p` + files=$(git diff-files -p) test_expect_success \ "Racy GIT trial #$trial part B" \ 'test "" != "$files"' diff --git a/t/t0011-hashmap.sh b/t/t0011-hashmap.sh index 391e2b6492..f97c80556f 100755 --- a/t/t0011-hashmap.sh +++ b/t/t0011-hashmap.sh @@ -237,4 +237,17 @@ test_expect_success 'grow / shrink' ' ' +test_expect_success 'string interning' ' + +test_hashmap "intern value1 +intern Value1 +intern value2 +intern value2 +" "value1 +Value1 +value2 +value2" + +' + test_done diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index e526184a0b..d2e51a81bc 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -20,14 +20,14 @@ test_expect_success setup ' git commit -m initial && - one=`git rev-parse HEAD:one` && - dir=`git rev-parse HEAD:dir` && - two=`git rev-parse HEAD:dir/two` && - three=`git rev-parse HEAD:three` && + one=$(git rev-parse HEAD:one) && + dir=$(git rev-parse HEAD:dir) && + two=$(git rev-parse HEAD:dir/two) && + three=$(git rev-parse HEAD:three) && for w in Some extra lines here; do echo $w; done >>one && git diff >patch.file && - patched=`git hash-object --stdin <one` && + patched=$(git hash-object --stdin <one) && git read-tree --reset -u HEAD && echo happy. @@ -111,7 +111,7 @@ test_expect_success 'update with autocrlf=input' ' } done && - differs=`git diff-index --cached HEAD` && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -135,7 +135,7 @@ test_expect_success 'update with autocrlf=true' ' } done && - differs=`git diff-index --cached HEAD` && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -158,9 +158,9 @@ test_expect_success 'checkout with autocrlf=true' ' break } done && - test "$one" = `git hash-object --stdin <one` && - test "$two" = `git hash-object --stdin <dir/two` && - differs=`git diff-index --cached HEAD` && + test "$one" = $(git hash-object --stdin <one) && + test "$two" = $(git hash-object --stdin <dir/two) && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -184,9 +184,9 @@ test_expect_success 'checkout with autocrlf=input' ' git update-index -- $f fi done && - test "$one" = `git hash-object --stdin <one` && - test "$two" = `git hash-object --stdin <dir/two` && - differs=`git diff-index --cached HEAD` && + test "$one" = $(git hash-object --stdin <one) && + test "$two" = $(git hash-object --stdin <dir/two) && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -200,7 +200,7 @@ test_expect_success 'apply patch (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply patch.file && - test "$patched" = "`git hash-object --stdin <one`" || { + test "$patched" = "$(git hash-object --stdin <one)" || { echo "Eh? apply without index" false } @@ -213,7 +213,7 @@ test_expect_success 'apply patch --cached (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply --cached patch.file && - test "$patched" = `git rev-parse :one` || { + test "$patched" = $(git rev-parse :one) || { echo "Eh? apply with --cached" false } @@ -226,8 +226,8 @@ test_expect_success 'apply patch --index (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply --index patch.file && - test "$patched" = `git rev-parse :one` && - test "$patched" = `git hash-object --stdin <one` || { + test "$patched" = $(git rev-parse :one) && + test "$patched" = $(git hash-object --stdin <one) || { echo "Eh? apply with --index" false } @@ -240,7 +240,7 @@ test_expect_success 'apply patch (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply patch.file && - test "$patched" = "`remove_cr <one | git hash-object --stdin`" || { + test "$patched" = "$(remove_cr <one | git hash-object --stdin)" || { echo "Eh? apply without index" false } @@ -253,7 +253,7 @@ test_expect_success 'apply patch --cached (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply --cached patch.file && - test "$patched" = `git rev-parse :one` || { + test "$patched" = $(git rev-parse :one) || { echo "Eh? apply without index" false } @@ -266,8 +266,8 @@ test_expect_success 'apply patch --index (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply --index patch.file && - test "$patched" = `git rev-parse :one` && - test "$patched" = "`remove_cr <one | git hash-object --stdin`" || { + test "$patched" = $(git rev-parse :one) && + test "$patched" = "$(remove_cr <one | git hash-object --stdin)" || { echo "Eh? apply with --index" false } diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index b92e6cb046..f890c54d13 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -190,8 +190,6 @@ test_expect_success 'required filter clean failure' ' test_must_fail git add test.fc ' -test -n "$GIT_TEST_LONG" && test_set_prereq EXPENSIVE - test_expect_success EXPENSIVE 'filter large file' ' git config filter.largefile.smudge cat && git config filter.largefile.clean cat && diff --git a/t/t0025-crlf-auto.sh b/t/t0025-crlf-auto.sh index f5f67a6337..c164b4662a 100755 --- a/t/t0025-crlf-auto.sh +++ b/t/t0025-crlf-auto.sh @@ -12,144 +12,144 @@ test_expect_success setup ' git config core.autocrlf false && - for w in Hello world how are you; do echo $w; done >one && - for w in I am very very fine thank you; do echo ${w}Q; done | q_to_cr >two && - for w in Oh here is a QNUL byte how alarming; do echo ${w}; done | q_to_nul >three && + for w in Hello world how are you; do echo $w; done >LFonly && + for w in I am very very fine thank you; do echo ${w}Q; done | q_to_cr >CRLFonly && + for w in Oh here is a QNUL byte how alarming; do echo ${w}; done | q_to_nul >LFwithNUL && git add . && git commit -m initial && - one=`git rev-parse HEAD:one` && - two=`git rev-parse HEAD:two` && - three=`git rev-parse HEAD:three` && + LFonly=$(git rev-parse HEAD:LFonly) && + CRLFonly=$(git rev-parse HEAD:CRLFonly) && + LFwithNUL=$(git rev-parse HEAD:LFwithNUL) && echo happy. ' test_expect_success 'default settings cause no changes' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git read-tree --reset -u HEAD && - ! has_cr one && - has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - threediff=`git diff three` && - test -z "$onediff" -a -z "$twodiff" -a -z "$threediff" + ! has_cr LFonly && + has_cr CRLFonly && + LFonlydiff=$(git diff LFonly) && + CRLFonlydiff=$(git diff CRLFonly) && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFonlydiff" -a -z "$CRLFonlydiff" -a -z "$LFwithNULdiff" ' test_expect_success 'crlf=true causes a CRLF file to be normalized' ' # Backwards compatibility check - rm -f .gitattributes tmp one two three && - echo "two crlf" > .gitattributes && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && + echo "CRLFonly crlf" > .gitattributes && git read-tree --reset -u HEAD && # Note, "normalized" means that git will normalize it if added - has_cr two && - twodiff=`git diff two` && - test -n "$twodiff" + has_cr CRLFonly && + CRLFonlydiff=$(git diff CRLFonly) && + test -n "$CRLFonlydiff" ' test_expect_success 'text=true causes a CRLF file to be normalized' ' - rm -f .gitattributes tmp one two three && - echo "two text" > .gitattributes && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && + echo "CRLFonly text" > .gitattributes && git read-tree --reset -u HEAD && # Note, "normalized" means that git will normalize it if added - has_cr two && - twodiff=`git diff two` && - test -n "$twodiff" + has_cr CRLFonly && + CRLFonlydiff=$(git diff CRLFonly) && + test -n "$CRLFonlydiff" ' test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=false' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf false && - echo "one eol=crlf" > .gitattributes && + echo "LFonly eol=crlf" > .gitattributes && git read-tree --reset -u HEAD && - has_cr one && - onediff=`git diff one` && - test -z "$onediff" + has_cr LFonly && + LFonlydiff=$(git diff LFonly) && + test -z "$LFonlydiff" ' test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=input' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf input && - echo "one eol=crlf" > .gitattributes && + echo "LFonly eol=crlf" > .gitattributes && git read-tree --reset -u HEAD && - has_cr one && - onediff=`git diff one` && - test -z "$onediff" + has_cr LFonly && + LFonlydiff=$(git diff LFonly) && + test -z "$LFonlydiff" ' test_expect_success 'eol=lf gives a normalized file LFs with autocrlf=true' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf true && - echo "one eol=lf" > .gitattributes && + echo "LFonly eol=lf" > .gitattributes && git read-tree --reset -u HEAD && - ! has_cr one && - onediff=`git diff one` && - test -z "$onediff" + ! has_cr LFonly && + LFonlydiff=$(git diff LFonly) && + test -z "$LFonlydiff" ' test_expect_success 'autocrlf=true does not normalize CRLF files' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf true && git read-tree --reset -u HEAD && - has_cr one && - has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - threediff=`git diff three` && - test -z "$onediff" -a -z "$twodiff" -a -z "$threediff" + has_cr LFonly && + has_cr CRLFonly && + LFonlydiff=$(git diff LFonly) && + CRLFonlydiff=$(git diff CRLFonly) && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFonlydiff" -a -z "$CRLFonlydiff" -a -z "$LFwithNULdiff" ' test_expect_success 'text=auto, autocrlf=true _does_ normalize CRLF files' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf true && echo "* text=auto" > .gitattributes && git read-tree --reset -u HEAD && - has_cr one && - has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - threediff=`git diff three` && - test -z "$onediff" -a -n "$twodiff" -a -z "$threediff" + has_cr LFonly && + has_cr CRLFonly && + LFonlydiff=$(git diff LFonly) && + CRLFonlydiff=$(git diff CRLFonly) && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFonlydiff" -a -n "$CRLFonlydiff" -a -z "$LFwithNULdiff" ' test_expect_success 'text=auto, autocrlf=true does not normalize binary files' ' - rm -f .gitattributes tmp one two three && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && git config core.autocrlf true && echo "* text=auto" > .gitattributes && git read-tree --reset -u HEAD && - ! has_cr three && - threediff=`git diff three` && - test -z "$threediff" + ! has_cr LFwithNUL && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFwithNULdiff" ' test_expect_success 'eol=crlf _does_ normalize binary files' ' - rm -f .gitattributes tmp one two three && - echo "three eol=crlf" > .gitattributes && + rm -f .gitattributes tmp LFonly CRLFonly LFwithNUL && + echo "LFwithNUL eol=crlf" > .gitattributes && git read-tree --reset -u HEAD && - has_cr three && - threediff=`git diff three` && - test -z "$threediff" + has_cr LFwithNUL && + LFwithNULdiff=$(git diff LFwithNUL) && + test -z "$LFwithNULdiff" ' test_done diff --git a/t/t0026-eol-config.sh b/t/t0026-eol-config.sh index fe0164be62..4807b0f015 100755 --- a/t/t0026-eol-config.sh +++ b/t/t0026-eol-config.sh @@ -20,8 +20,8 @@ test_expect_success setup ' git commit -m initial && - one=`git rev-parse HEAD:one` && - two=`git rev-parse HEAD:two` && + one=$(git rev-parse HEAD:one) && + two=$(git rev-parse HEAD:two) && echo happy. ' @@ -34,9 +34,9 @@ test_expect_success 'eol=lf puts LFs in normalized file' ' ! has_cr one && ! has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_expect_success 'eol=crlf puts CRLFs in normalized file' ' @@ -47,9 +47,9 @@ test_expect_success 'eol=crlf puts CRLFs in normalized file' ' has_cr one && ! has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_expect_success 'autocrlf=true overrides eol=lf' ' @@ -61,9 +61,9 @@ test_expect_success 'autocrlf=true overrides eol=lf' ' has_cr one && has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_expect_success 'autocrlf=true overrides unset eol' ' @@ -75,9 +75,9 @@ test_expect_success 'autocrlf=true overrides unset eol' ' has_cr one && has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_done diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh new file mode 100755 index 0000000000..72dd3e8bb4 --- /dev/null +++ b/t/t0027-auto-crlf.sh @@ -0,0 +1,265 @@ +#!/bin/sh + +test_description='CRLF conversion all combinations' + +. ./test-lib.sh + +if ! test_have_prereq EXPENSIVE +then + skip_all="EXPENSIVE not set" + test_done +fi + + +compare_files() +{ + od -c <"$1" >"$1".expect && + od -c <"$2" >"$2".actual && + test_cmp "$1".expect "$2".actual && + rm "$1".expect "$2".actual +} + +compare_ws_file() +{ + pfx=$1 + exp=$2.expect + act=$pfx.actual.$3 + od -c <"$2" >"$exp" && + od -c <"$3" >"$act" && + test_cmp $exp $act && + rm $exp $act +} + +create_gitattributes() +{ + txtbin=$1 + case "$txtbin" in + auto) + echo "*.txt text=auto" >.gitattributes + ;; + text) + echo "*.txt text" >.gitattributes + ;; + -text) + echo "*.txt -text" >.gitattributes + ;; + *) + echo >.gitattributes + ;; + esac +} + +create_file_in_repo() +{ + crlf=$1 + txtbin=$2 + create_gitattributes "$txtbin" && + for f in LF CRLF LF_mix_CR CRLF_mix_LF CRLF_nul + do + pfx=crlf_${crlf}_attr_${txtbin}_$f.txt && + cp $f $pfx && git -c core.autocrlf=$crlf add $pfx + done && + git commit -m "core.autocrlf $crlf" +} + +check_files_in_repo() +{ + crlf=$1 + txtbin=$2 + lfname=$3 + crlfname=$4 + lfmixcrlf=$5 + lfmixcr=$6 + crlfnul=$7 + pfx=crlf_${crlf}_attr_${txtbin}_ && + compare_files $lfname ${pfx}LF.txt && + compare_files $crlfname ${pfx}CRLF.txt && + compare_files $lfmixcrlf ${pfx}CRLF_mix_LF.txt && + compare_files $lfmixcr ${pfx}LF_mix_CR.txt && + compare_files $crlfnul ${pfx}CRLF_nul.txt +} + + +check_files_in_ws() +{ + eol=$1 + crlf=$2 + txtbin=$3 + lfname=$4 + crlfname=$5 + lfmixcrlf=$6 + lfmixcr=$7 + crlfnul=$8 + create_gitattributes $txtbin && + git config core.autocrlf $crlf && + pfx=eol_${eol}_crlf_${crlf}_attr_${txtbin}_ && + src=crlf_false_attr__ && + for f in LF CRLF LF_mix_CR CRLF_mix_LF CRLF_nul + do + rm $src$f.txt && + if test -z "$eol"; then + git checkout $src$f.txt + else + git -c core.eol=$eol checkout $src$f.txt + fi + done + + + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$txtbin file=LF" " + compare_ws_file $pfx $lfname ${src}LF.txt + " + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$txtbin file=CRLF" " + compare_ws_file $pfx $crlfname ${src}CRLF.txt + " + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$txtbin file=CRLF_mix_LF" " + compare_ws_file $pfx $lfmixcrlf ${src}CRLF_mix_LF.txt + " + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$txtbin file=LF_mix_CR" " + compare_ws_file $pfx $lfmixcr ${src}LF_mix_CR.txt + " + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$txtbin file=CRLF_nul" " + compare_ws_file $pfx $crlfnul ${src}CRLF_nul.txt + " +} + +####### +( + type od >/dev/null && + printf "line1Q\r\nline2\r\nline3" | q_to_nul >CRLF_nul && + cat >expect <<-EOF && + 0000000 l i n e 1 \0 \r \n l i n e 2 \r \n l + 0000020 i n e 3 + 0000024 +EOF + od -c CRLF_nul | sed -e "s/[ ][ ]*/ /g" -e "s/ *$//" >actual + test_cmp expect actual && + rm expect actual +) || { + skip_all="od not found or od -c not usable" + exit 0 + test_done +} + +test_expect_success 'setup master' ' + echo >.gitattributes && + git checkout -b master && + git add .gitattributes && + git commit -m "add .gitattributes" "" && + printf "line1\nline2\nline3" >LF && + printf "line1\r\nline2\r\nline3" >CRLF && + printf "line1\r\nline2\nline3" >CRLF_mix_LF && + printf "line1\nline2\rline3" >LF_mix_CR && + printf "line1\r\nline2\rline3" >CRLF_mix_CR && + printf "line1Q\nline2\nline3" | q_to_nul >LF_nul +' +# CRLF_nul had been created above + +test_expect_success 'create files' ' + create_file_in_repo false "" && + create_file_in_repo true "" && + create_file_in_repo input "" && + + create_file_in_repo false "auto" && + create_file_in_repo true "auto" && + create_file_in_repo input "auto" && + + create_file_in_repo false "text" && + create_file_in_repo true "text" && + create_file_in_repo input "text" && + + create_file_in_repo false "-text" && + create_file_in_repo true "-text" && + create_file_in_repo input "-text" && + rm -f *.txt && + git reset --hard +' + +test_expect_success 'commit empty gitattribues' ' + check_files_in_repo false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul && + check_files_in_repo true "" LF LF LF LF_mix_CR CRLF_nul && + check_files_in_repo input "" LF LF LF LF_mix_CR CRLF_nul +' + +test_expect_success 'commit text=auto' ' + check_files_in_repo false "auto" LF LF LF LF_mix_CR CRLF_nul && + check_files_in_repo true "auto" LF LF LF LF_mix_CR CRLF_nul && + check_files_in_repo input "auto" LF LF LF LF_mix_CR CRLF_nul +' + +test_expect_success 'commit text' ' + check_files_in_repo false "text" LF LF LF LF_mix_CR LF_nul && + check_files_in_repo true "text" LF LF LF LF_mix_CR LF_nul && + check_files_in_repo input "text" LF LF LF LF_mix_CR LF_nul +' + +test_expect_success 'commit -text' ' + check_files_in_repo false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul && + check_files_in_repo true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul && + check_files_in_repo input "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +' + +################################################################################ +# Check how files in the repo are changed when they are checked out +# How to read the table below: +# - check_files_in_ws will check multiple files, see below +# - parameter $1 : core.eol lf | crlf +# - parameter $2 : core.autocrlf false | true | input +# - parameter $3 : text in .gitattributs "" (empty) | auto | text | -text +# - parameter $4 : reference for a file with only LF in the repo +# - parameter $5 : reference for a file with only CRLF in the repo +# - parameter $6 : reference for a file with mixed LF and CRLF in the repo +# - parameter $7 : reference for a file with LF and CR in the repo (does somebody uses this ?) +# - parameter $8 : reference for a file with CRLF and a NUL (should be handled as binary when auto) + +check_files_in_ws lf false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf input "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + +check_files_in_ws lf false "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul +check_files_in_ws lf input "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + +check_files_in_ws lf false "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws lf input "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + +check_files_in_ws lf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws lf input "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + +########### +#core.autocrlf=input is forbidden with core.eol=crlf +check_files_in_ws crlf false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws crlf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + +check_files_in_ws crlf false "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul +check_files_in_ws crlf true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul + +check_files_in_ws crlf false "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws crlf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + +check_files_in_ws crlf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws crlf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + +if test_have_prereq MINGW +then +check_files_in_ws "" false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" false "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul +check_files_in_ws "" false "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws "" false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws "" true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul + +check_files_in_ws native false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native false "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul +check_files_in_ws native false "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +check_files_in_ws native false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +check_files_in_ws native true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +fi + +test_done diff --git a/t/t0030-stripspace.sh b/t/t0030-stripspace.sh index a8e84d8546..0333dd9875 100755 --- a/t/t0030-stripspace.sh +++ b/t/t0030-stripspace.sh @@ -225,22 +225,22 @@ test_expect_success \ test_expect_success \ 'text without newline at end should end with newline' ' - test `printf "$ttt" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$ttt" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$ttt$ttt" | git stripspace | wc -l` -gt 0 + test $(printf "$ttt" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$ttt" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$ttt$ttt" | git stripspace | wc -l) -gt 0 ' # text plus spaces at the end: test_expect_success \ 'text plus spaces without newline at end should end with newline' ' - test `printf "$ttt$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$ttt$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$sss$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$sss$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$sss$sss$sss" | git stripspace | wc -l` -gt 0 + test $(printf "$ttt$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$ttt$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$sss$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$sss$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$sss$sss$sss" | git stripspace | wc -l) -gt 0 ' test_expect_success \ diff --git a/t/t0081-line-buffer.sh b/t/t0081-line-buffer.sh index bd83ed371a..ce92e6acad 100755 --- a/t/t0081-line-buffer.sh +++ b/t/t0081-line-buffer.sh @@ -29,7 +29,7 @@ test_expect_success '0-length read, send along greeting' ' test_cmp expect actual ' -test_expect_success 'read from file descriptor' ' +test_expect_success !MINGW 'read from file descriptor' ' rm -f input && echo hello >expect && echo hello >input && diff --git a/t/t0110-urlmatch-normalization.sh b/t/t0110-urlmatch-normalization.sh index 8d6096d4d1..410d5768ca 100755 --- a/t/t0110-urlmatch-normalization.sh +++ b/t/t0110-urlmatch-normalization.sh @@ -117,7 +117,7 @@ test_expect_success 'url general escapes' ' test "$(test-urlmatch-normalization -p "X://W?'\!'")" = "x://w/?'\!'" ' -test_expect_success 'url high-bit escapes' ' +test_expect_success !MINGW 'url high-bit escapes' ' test "$(test-urlmatch-normalization -p "$(cat "$tu-1")")" = "x://q/%01%02%03%04%05%06%07%08%0E%0F%10%11%12" && test "$(test-urlmatch-normalization -p "$(cat "$tu-2")")" = "x://q/%13%14%15%16%17%18%19%1B%1C%1D%1E%1F%7F" && test "$(test-urlmatch-normalization -p "$(cat "$tu-3")")" = "x://q/%80%81%82%83%84%85%86%87%88%89%8A%8B%8C%8D%8E%8F" && @@ -127,7 +127,10 @@ test_expect_success 'url high-bit escapes' ' test "$(test-urlmatch-normalization -p "$(cat "$tu-7")")" = "x://q/%C0%C1%C2%C3%C4%C5%C6%C7%C8%C9%CA%CB%CC%CD%CE%CF" && test "$(test-urlmatch-normalization -p "$(cat "$tu-8")")" = "x://q/%D0%D1%D2%D3%D4%D5%D6%D7%D8%D9%DA%DB%DC%DD%DE%DF" && test "$(test-urlmatch-normalization -p "$(cat "$tu-9")")" = "x://q/%E0%E1%E2%E3%E4%E5%E6%E7%E8%E9%EA%EB%EC%ED%EE%EF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-10")")" = "x://q/%F0%F1%F2%F3%F4%F5%F6%F7%F8%F9%FA%FB%FC%FD%FE%FF" && + test "$(test-urlmatch-normalization -p "$(cat "$tu-10")")" = "x://q/%F0%F1%F2%F3%F4%F5%F6%F7%F8%F9%FA%FB%FC%FD%FE%FF" +' + +test_expect_success 'url utf-8 escapes' ' test "$(test-urlmatch-normalization -p "$(cat "$tu-11")")" = "x://q/%C2%80%DF%BF%E0%A0%80%EF%BF%BD%F0%90%80%80%F0%AF%BF%BD" ' diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index 538ea5fb1c..57ea5a10c5 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -6,7 +6,7 @@ test_description='basic credential helper tests' test_expect_success 'setup helper scripts' ' cat >dump <<-\EOF && - whoami=`echo $0 | sed s/.*git-credential-//` + whoami=$(echo $0 | sed s/.*git-credential-//) echo >&2 "$whoami: $*" OIFS=$IFS IFS== diff --git a/t/t1000-read-tree-m-3way.sh b/t/t1000-read-tree-m-3way.sh index babcdd2343..a0b79b4839 100755 --- a/t/t1000-read-tree-m-3way.sh +++ b/t/t1000-read-tree-m-3way.sh @@ -519,10 +519,10 @@ test_expect_success \ 'rm -f .git/index F16 && echo F16 >F16 && git update-index --add F16 && - tree0=`git write-tree` && + tree0=$(git write-tree) && echo E16 >F16 && git update-index F16 && - tree1=`git write-tree` && + tree1=$(git write-tree) && read_tree_must_succeed -m $tree0 $tree1 $tree1 $tree0 && git ls-files --stage' diff --git a/t/t1001-read-tree-m-2way.sh b/t/t1001-read-tree-m-2way.sh index 3a24abf549..db1b6f5cf4 100755 --- a/t/t1001-read-tree-m-2way.sh +++ b/t/t1001-read-tree-m-2way.sh @@ -36,7 +36,7 @@ compare_change () { } check_cache_at () { - clean_if_empty=`git diff-files -- "$1"` + clean_if_empty=$(git diff-files -- "$1") case "$clean_if_empty" in '') echo "$1: clean" ;; ?*) echo "$1: dirty" ;; @@ -68,14 +68,14 @@ test_expect_success \ echo rezrov >rezrov && echo yomin >yomin && git update-index --add nitfol bozbar rezrov && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH && cat bozbar-new >bozbar && git update-index --add frotz bozbar --force-remove rezrov && git ls-files --stage >M.out && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && git diff-tree $treeH $treeM' @@ -315,7 +315,7 @@ test_expect_success \ 'rm -f .git/index && echo DF >DF && git update-index --add DF && - treeDF=`git write-tree` && + treeDF=$(git write-tree) && echo treeDF $treeDF && git ls-tree $treeDF && @@ -323,7 +323,7 @@ test_expect_success \ mkdir DF && echo DF/DF >DF/DF && git update-index --add --remove DF DF/DF && - treeDFDF=`git write-tree` && + treeDFDF=$(git write-tree) && echo treeDFDF $treeDFDF && git ls-tree $treeDFDF && git ls-files --stage >DFDF.out' @@ -345,7 +345,7 @@ test_expect_success \ 'rm -f .git/index && : >a && git update-index --add a && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && git ls-files --stage >treeM.out && @@ -354,7 +354,7 @@ test_expect_success \ git update-index --remove a && mkdir a && : >a/b && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH' @@ -372,7 +372,7 @@ test_expect_success \ mkdir c && : >c/d && git update-index --add a c/d && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && git ls-files --stage >treeM.out && @@ -381,7 +381,7 @@ test_expect_success \ mkdir a && : >a/b && git update-index --add --remove a a/b && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH' diff --git a/t/t1002-read-tree-m-u-2way.sh b/t/t1002-read-tree-m-u-2way.sh index a847709a13..fed877b20f 100755 --- a/t/t1002-read-tree-m-u-2way.sh +++ b/t/t1002-read-tree-m-u-2way.sh @@ -21,7 +21,7 @@ compare_change () { } check_cache_at () { - clean_if_empty=`git diff-files -- "$1"` + clean_if_empty=$(git diff-files -- "$1") case "$clean_if_empty" in '') echo "$1: clean" ;; ?*) echo "$1: dirty" ;; @@ -41,14 +41,14 @@ test_expect_success \ echo bozbar >bozbar && echo rezrov >rezrov && git update-index --add nitfol bozbar rezrov && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH && echo gnusto >bozbar && git update-index --add frotz bozbar --force-remove rezrov && git ls-files --stage >M.out && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && sum bozbar frotz nitfol >M.sum && @@ -318,7 +318,7 @@ test_expect_success \ 'rm -f .git/index && echo DF >DF && git update-index --add DF && - treeDF=`git write-tree` && + treeDF=$(git write-tree) && echo treeDF $treeDF && git ls-tree $treeDF && @@ -326,7 +326,7 @@ test_expect_success \ mkdir DF && echo DF/DF >DF/DF && git update-index --add --remove DF DF/DF && - treeDFDF=`git write-tree` && + treeDFDF=$(git write-tree) && echo treeDFDF $treeDFDF && git ls-tree $treeDFDF && git ls-files --stage >DFDF.out' diff --git a/t/t1003-read-tree-prefix.sh b/t/t1003-read-tree-prefix.sh index 8c6d67edda..b6111cd150 100755 --- a/t/t1003-read-tree-prefix.sh +++ b/t/t1003-read-tree-prefix.sh @@ -11,7 +11,7 @@ test_description='git read-tree --prefix test. test_expect_success setup ' echo hello >one && git update-index --add one && - tree=`git write-tree` && + tree=$(git write-tree) && echo tree is $tree ' diff --git a/t/t1004-read-tree-m-u-wf.sh b/t/t1004-read-tree-m-u-wf.sh index 3e72aff470..c70cf42300 100755 --- a/t/t1004-read-tree-m-u-wf.sh +++ b/t/t1004-read-tree-m-u-wf.sh @@ -30,7 +30,7 @@ test_expect_success 'two-way not clobbering' ' echo >file2 master creates untracked file2 && echo >subdir/file2 master creates untracked subdir/file2 && - if err=`read_tree_u_must_succeed -m -u master side 2>&1` + if err=$(read_tree_u_must_succeed -m -u master side 2>&1) then echo should have complained false @@ -43,7 +43,7 @@ echo file2 >.gitignore test_expect_success 'two-way with incorrect --exclude-per-directory (1)' ' - if err=`read_tree_u_must_succeed -m --exclude-per-directory=.gitignore master side 2>&1` + if err=$(read_tree_u_must_succeed -m --exclude-per-directory=.gitignore master side 2>&1) then echo should have complained false @@ -54,7 +54,7 @@ test_expect_success 'two-way with incorrect --exclude-per-directory (1)' ' test_expect_success 'two-way with incorrect --exclude-per-directory (2)' ' - if err=`read_tree_u_must_succeed -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore master side 2>&1` + if err=$(read_tree_u_must_succeed -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore master side 2>&1) then echo should have complained false @@ -95,7 +95,7 @@ test_expect_success 'three-way not clobbering a working tree file' ' git checkout master && echo >file3 file three created in master, untracked && echo >subdir/file3 file three created in master, untracked && - if err=`read_tree_u_must_succeed -m -u branch-point master side 2>&1` + if err=$(read_tree_u_must_succeed -m -u branch-point master side 2>&1) then echo should have complained false diff --git a/t/t1013-read-tree-submodule.sh b/t/t1013-read-tree-submodule.sh new file mode 100755 index 0000000000..20526aed34 --- /dev/null +++ b/t/t1013-read-tree-submodule.sh @@ -0,0 +1,12 @@ +#!/bin/sh + +test_description='read-tree can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +test_submodule_switch "git read-tree -u -m" + +test_submodule_forced_switch "git read-tree -u --reset" + +test_done diff --git a/t/t1020-subdirectory.sh b/t/t1020-subdirectory.sh index 6902320e81..2edb4f2de5 100755 --- a/t/t1020-subdirectory.sh +++ b/t/t1020-subdirectory.sh @@ -20,27 +20,27 @@ test_expect_success setup ' test_expect_success 'update-index and ls-files' ' git update-index --add one && - case "`git ls-files`" in + case "$(git ls-files)" in one) echo pass one ;; *) echo bad one; exit 1 ;; esac && ( cd dir && git update-index --add two && - case "`git ls-files`" in + case "$(git ls-files)" in two) echo pass two ;; *) echo bad two; exit 1 ;; esac ) && - case "`git ls-files`" in + case "$(git ls-files)" in dir/two"$LF"one) echo pass both ;; *) echo bad; exit 1 ;; esac ' test_expect_success 'cat-file' ' - two=`git ls-files -s dir/two` && - two=`expr "$two" : "[0-7]* \\([0-9a-f]*\\)"` && + two=$(git ls-files -s dir/two) && + two=$(expr "$two" : "[0-7]* \\([0-9a-f]*\\)") && echo "$two" && git cat-file -p "$two" >actual && cmp dir/two actual && @@ -55,18 +55,18 @@ rm -f actual dir/actual test_expect_success 'diff-files' ' echo a >>one && echo d >>dir/two && - case "`git diff-files --name-only`" in + case "$(git diff-files --name-only)" in dir/two"$LF"one) echo pass top ;; *) echo bad top; exit 1 ;; esac && # diff should not omit leading paths ( cd dir && - case "`git diff-files --name-only`" in + case "$(git diff-files --name-only)" in dir/two"$LF"one) echo pass subdir ;; *) echo bad subdir; exit 1 ;; esac && - case "`git diff-files --name-only .`" in + case "$(git diff-files --name-only .)" in dir/two) echo pass subdir limited ;; *) echo bad subdir limited; exit 1 ;; esac @@ -74,11 +74,11 @@ test_expect_success 'diff-files' ' ' test_expect_success 'write-tree' ' - top=`git write-tree` && + top=$(git write-tree) && echo $top && ( cd dir && - sub=`git write-tree` && + sub=$(git write-tree) && echo $sub && test "z$top" = "z$sub" ) @@ -96,7 +96,7 @@ test_expect_success 'checkout-index' ' test_expect_success 'read-tree' ' rm -f one dir/two && - tree=`git write-tree` && + tree=$(git write-tree) && read_tree_u_must_succeed --reset -u "$tree" && cmp one original.one && cmp dir/two original.two && @@ -118,7 +118,7 @@ test_expect_success 'alias expansion' ' ) ' -test_expect_success NOT_MINGW '!alias expansion' ' +test_expect_success !MINGW '!alias expansion' ' pwd >expect && ( git config alias.test-alias-directory !pwd && diff --git a/t/t1050-large.sh b/t/t1050-large.sh index fd10528009..aea493646e 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -131,7 +131,7 @@ test_expect_success 'git-show a large file' ' ' test_expect_success 'index-pack' ' - git clone file://"`pwd`"/.git foo && + git clone file://"$(pwd)"/.git foo && GIT_DIR=non-existent git index-pack --strict --verify foo/.git/objects/pack/*.pack ' @@ -140,7 +140,7 @@ test_expect_success 'repack' ' ' test_expect_success 'pack-objects with large loose object' ' - SHA1=`git hash-object huge` && + SHA1=$(git hash-object huge) && test_create_repo loose && echo $SHA1 | git pack-objects --stdout | GIT_ALLOC_LIMIT=0 GIT_DIR=loose/.git git unpack-objects && diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 58cd5435be..938fc8bfd7 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -824,14 +824,14 @@ cat >expect <<\EOF trailingtilde = foo~ EOF -test_expect_success NOT_MINGW 'set --path' ' +test_expect_success !MINGW 'set --path' ' rm -f .git/config && git config --path path.home "~/" && git config --path path.normal "/dev/null" && git config --path path.trailingtilde "foo~" && test_cmp expect .git/config' -if test_have_prereq NOT_MINGW && test "${HOME+set}" +if test_have_prereq !MINGW && test "${HOME+set}" then test_set_prereq HOMEVAR fi @@ -854,7 +854,7 @@ cat >expect <<\EOF foo~ EOF -test_expect_success NOT_MINGW 'get --path copes with unset $HOME' ' +test_expect_success !MINGW 'get --path copes with unset $HOME' ' ( unset HOME; test_must_fail git config --get --path path.home \ @@ -1010,6 +1010,17 @@ test_expect_success 'git -c "key=value" support' ' test_must_fail git -c name=value config core.name ' +# We just need a type-specifier here that cares about the +# distinction internally between a NULL boolean and a real +# string (because most of git's internal parsers do care). +# Using "--path" works, but we do not otherwise care about +# its semantics. +test_expect_success 'git -c can represent empty string' ' + echo >expect && + git -c foo.empty= config --path foo.empty >actual && + test_cmp expect actual +' + test_expect_success 'key sanity-checking' ' test_must_fail git config foo=bar && test_must_fail git config foo=.bar && @@ -1158,4 +1169,14 @@ test_expect_failure 'adding a key into an empty section reuses header' ' test_cmp expect .git/config ' +test_expect_success POSIXPERM,PERL 'preserves existing permissions' ' + chmod 0600 .git/config && + git config imap.pass Hunter2 && + perl -e \ + "die q(badset) if ((stat(q(.git/config)))[2] & 07777) != 0600" && + git config --rename-section imap pop && + perl -e \ + "die q(badrename) if ((stat(q(.git/config)))[2] & 07777) != 0600" +' + test_done diff --git a/t/t1308-config-set.sh b/t/t1308-config-set.sh new file mode 100755 index 0000000000..7fdf840b00 --- /dev/null +++ b/t/t1308-config-set.sh @@ -0,0 +1,200 @@ +#!/bin/sh + +test_description='Test git config-set API in different settings' + +. ./test-lib.sh + +# 'check_config get_* section.key value' verifies that the entry for +# section.key is 'value' +check_config () { + if test "$1" = expect_code + then + expect_code="$2" && shift && shift + else + expect_code=0 + fi && + op=$1 key=$2 && shift && shift && + if test $# != 0 + then + printf "%s\n" "$@" + fi >expect && + test_expect_code $expect_code test-config "$op" "$key" >actual && + test_cmp expect actual +} + +test_expect_success 'setup default config' ' + cat >.git/config <<\EOF + [case] + penguin = very blue + Movie = BadPhysics + UPPERCASE = true + MixedCase = true + my = + foo + baz = sam + [Cores] + WhatEver = Second + baz = bar + [cores] + baz = bat + [CORES] + baz = ball + [my "Foo bAr"] + hi = mixed-case + [my "FOO BAR"] + hi = upper-case + [my "foo bar"] + hi = lower-case + [case] + baz = bat + baz = hask + [lamb] + chop = 65 + head = none + [goat] + legs = 4 + head = true + skin = false + nose = 1 + horns + EOF +' + +test_expect_success 'get value for a simple key' ' + check_config get_value case.penguin "very blue" +' + +test_expect_success 'get value for a key with value as an empty string' ' + check_config get_value case.my "" +' + +test_expect_success 'get value for a key with value as NULL' ' + check_config get_value case.foo "(NULL)" +' + +test_expect_success 'upper case key' ' + check_config get_value case.UPPERCASE "true" && + check_config get_value case.uppercase "true" +' + +test_expect_success 'mixed case key' ' + check_config get_value case.MixedCase "true" && + check_config get_value case.MIXEDCASE "true" && + check_config get_value case.mixedcase "true" +' + +test_expect_success 'key and value with mixed case' ' + check_config get_value case.Movie "BadPhysics" +' + +test_expect_success 'key with case sensitive subsection' ' + check_config get_value "my.Foo bAr.hi" "mixed-case" && + check_config get_value "my.FOO BAR.hi" "upper-case" && + check_config get_value "my.foo bar.hi" "lower-case" +' + +test_expect_success 'key with case insensitive section header' ' + check_config get_value cores.baz "ball" && + check_config get_value Cores.baz "ball" && + check_config get_value CORES.baz "ball" && + check_config get_value coreS.baz "ball" +' + +test_expect_success 'key with case insensitive section header & variable' ' + check_config get_value CORES.BAZ "ball" && + check_config get_value cores.baz "ball" && + check_config get_value cores.BaZ "ball" && + check_config get_value cOreS.bAz "ball" +' + +test_expect_success 'find value with misspelled key' ' + check_config expect_code 1 get_value "my.fOo Bar.hi" "Value not found for \"my.fOo Bar.hi\"" +' + +test_expect_success 'find value with the highest priority' ' + check_config get_value case.baz "hask" +' + +test_expect_success 'find integer value for a key' ' + check_config get_int lamb.chop 65 +' + +test_expect_success 'find integer if value is non parse-able' ' + check_config expect_code 128 get_int lamb.head +' + +test_expect_success 'find bool value for the entered key' ' + check_config get_bool goat.head 1 && + check_config get_bool goat.skin 0 && + check_config get_bool goat.nose 1 && + check_config get_bool goat.horns 1 && + check_config get_bool goat.legs 1 +' + +test_expect_success 'find multiple values' ' + check_config get_value_multi case.baz sam bat hask +' + +test_expect_success 'find value from a configset' ' + cat >config2 <<-\EOF && + [case] + baz = lama + [my] + new = silk + [case] + baz = ball + EOF + echo silk >expect && + test-config configset_get_value my.new config2 .git/config >actual && + test_cmp expect actual +' + +test_expect_success 'find value with highest priority from a configset' ' + echo hask >expect && + test-config configset_get_value case.baz config2 .git/config >actual && + test_cmp expect actual +' + +test_expect_success 'find value_list for a key from a configset' ' + cat >except <<-\EOF && + sam + bat + hask + lama + ball + EOF + test-config configset_get_value case.baz config2 .git/config >actual && + test_cmp expect actual +' + +test_expect_success 'proper error on non-existent files' ' + echo "Error (-1) reading configuration file non-existent-file." >expect && + test_expect_code 2 test-config configset_get_value foo.bar non-existent-file 2>actual && + test_cmp expect actual +' + +test_expect_success POSIXPERM,SANITY 'proper error on non-accessible files' ' + chmod -r .git/config && + test_when_finished "chmod +r .git/config" && + echo "Error (-1) reading configuration file .git/config." >expect && + test_expect_code 2 test-config configset_get_value foo.bar .git/config 2>actual && + test_cmp expect actual +' + +test_expect_success 'proper error on error in default config files' ' + cp .git/config .git/config.old && + test_when_finished "mv .git/config.old .git/config" && + echo "[" >>.git/config && + echo "fatal: bad config file line 35 in .git/config" >expect && + test_expect_code 128 test-config get_value foo.bar 2>actual && + test_cmp expect actual +' + +test_expect_success 'proper error on error in custom config files' ' + echo "[" >>syntax-error && + echo "fatal: bad config file line 1 in syntax-error" >expect && + test_expect_code 128 test-config configset_get_value foo.bar syntax-error 2>actual && + test_cmp expect actual +' + +test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index e130c528fe..0218e96366 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -235,7 +235,7 @@ test_expect_success \ 'rm -f o e && git rev-parse --verify "master@{2005-05-26 23:33:01}" >o 2>e && test '"$B"' = $(cat o) && - test "warning: Log .git/logs/'"$m has gap after $gd"'." = "$(cat e)"' + test "warning: Log for ref '"$m has gap after $gd"'." = "$(cat e)"' test_expect_success \ 'Query "master@{2005-05-26 23:38:00}" (middle of history)' \ 'rm -f o e && @@ -253,7 +253,7 @@ test_expect_success \ 'rm -f o e && git rev-parse --verify "master@{2005-05-28}" >o 2>e && test '"$D"' = $(cat o) && - test "warning: Log .git/logs/'"$m unexpectedly ended on $ld"'." = "$(cat e)"' + test "warning: Log for ref '"$m unexpectedly ended on $ld"'." = "$(cat e)"' rm -f .git/$m .git/logs/$m expect @@ -350,22 +350,28 @@ test_expect_success 'stdin fails on unknown command' ' grep "fatal: unknown command: unknown $a" err ' -test_expect_success 'stdin fails on badly quoted input' ' +test_expect_success 'stdin fails on unbalanced quotes' ' echo "create $a \"master" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && grep "fatal: badly quoted argument: \\\"master" err ' -test_expect_success 'stdin fails on arguments not separated by space' ' +test_expect_success 'stdin fails on invalid escape' ' + echo "create $a \"ma\zter\"" >stdin && + test_must_fail git update-ref --stdin <stdin 2>err && + grep "fatal: badly quoted argument: \\\"ma\\\\zter\\\"" err +' + +test_expect_success 'stdin fails on junk after quoted argument' ' echo "create \"$a\"master" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: expected SP but got: master" err + grep "fatal: unexpected character after quoted argument: \\\"$a\\\"master" err ' test_expect_success 'stdin fails create with no ref' ' echo "create " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create line missing <ref>" err + grep "fatal: create: missing <ref>" err ' test_expect_success 'stdin fails create with bad ref name' ' @@ -377,19 +383,19 @@ test_expect_success 'stdin fails create with bad ref name' ' test_expect_success 'stdin fails create with no new value' ' echo "create $a" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create $a missing <newvalue>" err + grep "fatal: create $a: missing <newvalue>" err ' test_expect_success 'stdin fails create with too many arguments' ' echo "create $a $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create $a has extra input: $m" err + grep "fatal: create $a: extra input: $m" err ' test_expect_success 'stdin fails update with no ref' ' echo "update " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: update line missing <ref>" err + grep "fatal: update: missing <ref>" err ' test_expect_success 'stdin fails update with bad ref name' ' @@ -401,19 +407,19 @@ test_expect_success 'stdin fails update with bad ref name' ' test_expect_success 'stdin fails update with no new value' ' echo "update $a" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: update $a missing <newvalue>" err + grep "fatal: update $a: missing <newvalue>" err ' test_expect_success 'stdin fails update with too many arguments' ' echo "update $a $m $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: update $a has extra input: $m" err + grep "fatal: update $a: extra input: $m" err ' test_expect_success 'stdin fails delete with no ref' ' echo "delete " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: delete line missing <ref>" err + grep "fatal: delete: missing <ref>" err ' test_expect_success 'stdin fails delete with bad ref name' ' @@ -425,13 +431,13 @@ test_expect_success 'stdin fails delete with bad ref name' ' test_expect_success 'stdin fails delete with too many arguments' ' echo "delete $a $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: delete $a has extra input: $m" err + grep "fatal: delete $a: extra input: $m" err ' test_expect_success 'stdin fails verify with too many arguments' ' echo "verify $a $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: verify $a has extra input: $m" err + grep "fatal: verify $a: extra input: $m" err ' test_expect_success 'stdin fails option with unknown name' ' @@ -458,6 +464,24 @@ test_expect_success 'stdin create ref works' ' test_cmp expect actual ' +test_expect_success 'stdin succeeds with quoted argument' ' + git update-ref -d $a && + echo "create $a \"$m\"" >stdin && + git update-ref --stdin <stdin && + git rev-parse $m >expect && + git rev-parse $a >actual && + test_cmp expect actual +' + +test_expect_success 'stdin succeeds with escaped character' ' + git update-ref -d $a && + echo "create $a \"ma\\163ter\"" >stdin && + git update-ref --stdin <stdin && + git rev-parse $m >expect && + git rev-parse $a >actual && + test_cmp expect actual +' + test_expect_success 'stdin update ref creates with zero old value' ' echo "update $b $m $Z" >stdin && git update-ref --stdin <stdin && @@ -494,21 +518,21 @@ test_expect_success 'stdin update ref fails with wrong old value' ' test_expect_success 'stdin update ref fails with bad old value' ' echo "update $c $m does-not-exist" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: invalid old value for ref $c: does-not-exist" err && + grep "fatal: update $c: invalid <oldvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' test_expect_success 'stdin create ref fails with bad new value' ' echo "create $c does-not-exist" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: invalid new value for ref $c: does-not-exist" err && + grep "fatal: create $c: invalid <newvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' test_expect_success 'stdin create ref fails with zero new value' ' echo "create $c " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create $c given zero new value" err && + grep "fatal: create $c: zero <newvalue>" err && test_must_fail git rev-parse --verify -q $c ' @@ -532,7 +556,7 @@ test_expect_success 'stdin delete ref fails with wrong old value' ' test_expect_success 'stdin delete ref fails with zero old value' ' echo "delete $a " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: delete $a given zero old value" err && + grep "fatal: delete $a: zero <oldvalue>" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual @@ -673,7 +697,7 @@ test_expect_success 'stdin -z fails on unknown command' ' test_expect_success 'stdin -z fails create with no ref' ' printf $F "create " >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: create line missing <ref>" err + grep "fatal: create: missing <ref>" err ' test_expect_success 'stdin -z fails create with bad ref name' ' @@ -685,7 +709,7 @@ test_expect_success 'stdin -z fails create with bad ref name' ' test_expect_success 'stdin -z fails create with no new value' ' printf $F "create $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: create $a missing <newvalue>" err + grep "fatal: create $a: unexpected end of input when reading <newvalue>" err ' test_expect_success 'stdin -z fails create with too many arguments' ' @@ -697,25 +721,39 @@ test_expect_success 'stdin -z fails create with too many arguments' ' test_expect_success 'stdin -z fails update with no ref' ' printf $F "update " >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: update line missing <ref>" err + grep "fatal: update: missing <ref>" err +' + +test_expect_success 'stdin -z fails update with too few args' ' + printf $F "update $a" "$m" >stdin && + test_must_fail git update-ref -z --stdin <stdin 2>err && + grep "fatal: update $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails update with bad ref name' ' - printf $F "update ~a" "$m" >stdin && + printf $F "update ~a" "$m" "" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && grep "fatal: invalid ref format: ~a" err ' +test_expect_success 'stdin -z emits warning with empty new value' ' + git update-ref $a $m && + printf $F "update $a" "" "" >stdin && + git update-ref -z --stdin <stdin 2>err && + grep "warning: update $a: missing <newvalue>, treating as zero" err && + test_must_fail git rev-parse --verify -q $a +' + test_expect_success 'stdin -z fails update with no new value' ' printf $F "update $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: update $a missing <newvalue>" err + grep "fatal: update $a: unexpected end of input when reading <newvalue>" err ' test_expect_success 'stdin -z fails update with no old value' ' printf $F "update $a" "$m" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: update $a missing \\[<oldvalue>\\] NUL" err + grep "fatal: update $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails update with too many arguments' ' @@ -727,7 +765,7 @@ test_expect_success 'stdin -z fails update with too many arguments' ' test_expect_success 'stdin -z fails delete with no ref' ' printf $F "delete " >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: delete line missing <ref>" err + grep "fatal: delete: missing <ref>" err ' test_expect_success 'stdin -z fails delete with bad ref name' ' @@ -739,7 +777,7 @@ test_expect_success 'stdin -z fails delete with bad ref name' ' test_expect_success 'stdin -z fails delete with no old value' ' printf $F "delete $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: delete $a missing \\[<oldvalue>\\] NUL" err + grep "fatal: delete $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails delete with too many arguments' ' @@ -757,7 +795,7 @@ test_expect_success 'stdin -z fails verify with too many arguments' ' test_expect_success 'stdin -z fails verify with no old value' ' printf $F "verify $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: verify $a missing \\[<oldvalue>\\] NUL" err + grep "fatal: verify $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails option with unknown name' ' @@ -816,7 +854,7 @@ test_expect_success 'stdin -z update ref fails with wrong old value' ' test_expect_success 'stdin -z update ref fails with bad old value' ' printf $F "update $c" "$m" "does-not-exist" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: invalid old value for ref $c: does-not-exist" err && + grep "fatal: update $c: invalid <oldvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' @@ -834,14 +872,14 @@ test_expect_success 'stdin -z create ref fails with bad new value' ' git update-ref -d "$c" && printf $F "create $c" "does-not-exist" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: invalid new value for ref $c: does-not-exist" err && + grep "fatal: create $c: invalid <newvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' -test_expect_success 'stdin -z create ref fails with zero new value' ' +test_expect_success 'stdin -z create ref fails with empty new value' ' printf $F "create $c" "" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: create $c given zero new value" err && + grep "fatal: create $c: missing <newvalue>" err && test_must_fail git rev-parse --verify -q $c ' @@ -865,7 +903,7 @@ test_expect_success 'stdin -z delete ref fails with wrong old value' ' test_expect_success 'stdin -z delete ref fails with zero old value' ' printf $F "delete $a" "$Z" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: delete $a given zero old value" err && + grep "fatal: delete $a: zero <oldvalue>" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual @@ -923,7 +961,7 @@ test_expect_success 'stdin -z update refs works with identity updates' ' test_expect_success 'stdin -z update refs fails with wrong old value' ' git update-ref $c $m && - printf $F "update $a" "$m" "$m" "update $b" "$m" "$m" "update $c" "" "$Z" >stdin && + printf $F "update $a" "$m" "$m" "update $b" "$m" "$m" "update $c" "$m" "$Z" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && grep "fatal: Cannot lock the ref '"'"'$c'"'"'" err && git rev-parse $m >expect && diff --git a/t/t1402-check-ref-format.sh b/t/t1402-check-ref-format.sh index 1a5a5f39fd..e5dc62e9ef 100755 --- a/t/t1402-check-ref-format.sh +++ b/t/t1402-check-ref-format.sh @@ -7,7 +7,7 @@ test_description='Test git check-ref-format' valid_ref() { prereq= case $1 in - [A-Z]*) + [A-Z!]*) prereq=$1 shift esac @@ -19,7 +19,7 @@ valid_ref() { invalid_ref() { prereq= case $1 in - [A-Z]*) + [A-Z!]*) prereq=$1 shift esac @@ -30,17 +30,17 @@ invalid_ref() { } invalid_ref '' -invalid_ref NOT_MINGW '/' -invalid_ref NOT_MINGW '/' --allow-onelevel -invalid_ref NOT_MINGW '/' --normalize -invalid_ref NOT_MINGW '/' '--allow-onelevel --normalize' +invalid_ref !MINGW '/' +invalid_ref !MINGW '/' --allow-onelevel +invalid_ref !MINGW '/' --normalize +invalid_ref !MINGW '/' '--allow-onelevel --normalize' valid_ref 'foo/bar/baz' valid_ref 'foo/bar/baz' --normalize invalid_ref 'refs///heads/foo' valid_ref 'refs///heads/foo' --normalize invalid_ref 'heads/foo/' -invalid_ref NOT_MINGW '/heads/foo' -valid_ref NOT_MINGW '/heads/foo' --normalize +invalid_ref !MINGW '/heads/foo' +valid_ref !MINGW '/heads/foo' --normalize invalid_ref '///heads/foo' valid_ref '///heads/foo' --normalize invalid_ref './foo' @@ -48,6 +48,7 @@ invalid_ref './foo/bar' invalid_ref 'foo/./bar' invalid_ref 'foo/bar/.' invalid_ref '.refs/foo' +invalid_ref 'refs/heads/foo.' invalid_ref 'heads/foo..bar' invalid_ref 'heads/foo?bar' valid_ref 'foo./bar' @@ -119,14 +120,14 @@ invalid_ref "$ref" --refspec-pattern invalid_ref "$ref" '--refspec-pattern --allow-onelevel' ref='/foo' -invalid_ref NOT_MINGW "$ref" -invalid_ref NOT_MINGW "$ref" --allow-onelevel -invalid_ref NOT_MINGW "$ref" --refspec-pattern -invalid_ref NOT_MINGW "$ref" '--refspec-pattern --allow-onelevel' -invalid_ref NOT_MINGW "$ref" --normalize -valid_ref NOT_MINGW "$ref" '--allow-onelevel --normalize' -invalid_ref NOT_MINGW "$ref" '--refspec-pattern --normalize' -valid_ref NOT_MINGW "$ref" '--refspec-pattern --allow-onelevel --normalize' +invalid_ref !MINGW "$ref" +invalid_ref !MINGW "$ref" --allow-onelevel +invalid_ref !MINGW "$ref" --refspec-pattern +invalid_ref !MINGW "$ref" '--refspec-pattern --allow-onelevel' +invalid_ref !MINGW "$ref" --normalize +valid_ref !MINGW "$ref" '--allow-onelevel --normalize' +invalid_ref !MINGW "$ref" '--refspec-pattern --normalize' +valid_ref !MINGW "$ref" '--refspec-pattern --allow-onelevel --normalize' test_expect_success "check-ref-format --branch @{-1}" ' T=$(git write-tree) && @@ -161,7 +162,7 @@ test_expect_success 'check-ref-format --branch from subdir' ' valid_ref_normalized() { prereq= case $1 in - [A-Z]*) + [A-Z!]*) prereq=$1 shift esac @@ -173,7 +174,7 @@ valid_ref_normalized() { invalid_ref_normalized() { prereq= case $1 in - [A-Z]*) + [A-Z!]*) prereq=$1 shift esac @@ -184,10 +185,10 @@ invalid_ref_normalized() { valid_ref_normalized 'heads/foo' 'heads/foo' valid_ref_normalized 'refs///heads/foo' 'refs/heads/foo' -valid_ref_normalized NOT_MINGW '/heads/foo' 'heads/foo' +valid_ref_normalized !MINGW '/heads/foo' 'heads/foo' valid_ref_normalized '///heads/foo' 'heads/foo' invalid_ref_normalized 'foo' -invalid_ref_normalized NOT_MINGW '/foo' +invalid_ref_normalized !MINGW '/foo' invalid_ref_normalized 'heads/foo/../bar' invalid_ref_normalized 'heads/./foo' invalid_ref_normalized 'heads\foo' diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 236b13a3ab..8cab06f90a 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -245,4 +245,12 @@ test_expect_success 'gc.reflogexpire=false' ' ' +test_expect_success 'checkout should not delete log for packed ref' ' + test $(git reflog master | wc -l) = 4 && + git branch foo && + git pack-refs --all && + git checkout foo && + test $(git reflog master | wc -l) = 4 +' + test_done diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh new file mode 100755 index 0000000000..94fb473e7c --- /dev/null +++ b/t/t1700-split-index.sh @@ -0,0 +1,194 @@ +#!/bin/sh + +test_description='split index mode tests' + +. ./test-lib.sh + +# We need total control of index splitting here +sane_unset GIT_TEST_SPLIT_INDEX + +test_expect_success 'enable split index' ' + git update-index --split-index && + test-dump-split-index .git/index >actual && + cat >expect <<EOF && +own 8299b0bcd1ac364e5f1d7768efb62fa2da79a339 +base 39d890139ee5356c7ef572216cebcd27aa41f9df +replacements: +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'add one file' ' + : >one && + git update-index --add one && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +base 39d890139ee5356c7ef572216cebcd27aa41f9df +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +replacements: +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'disable split index' ' + git update-index --no-split-index && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + BASE=`test-dump-split-index .git/index | grep "^own" | sed "s/own/base/"` && + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +not a split index +EOF + test_cmp expect actual +' + +test_expect_success 'enable split index again, "one" now belongs to base index"' ' + git update-index --split-index && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +$BASE +replacements: +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'modify original file, base index untouched' ' + echo modified >one && + git update-index one && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + q_to_tab >expect <<EOF && +$BASE +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q +replacements: 0 +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'add another file, which stays index' ' + : >two && + git update-index --add two && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + q_to_tab >expect <<EOF && +$BASE +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +replacements: 0 +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'remove file not in base index' ' + git update-index --force-remove two && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + q_to_tab >expect <<EOF && +$BASE +100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q +replacements: 0 +deletions: +EOF + test_cmp expect actual +' + +test_expect_success 'remove file in base index' ' + git update-index --force-remove one && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +$BASE +replacements: +deletions: 0 +EOF + test_cmp expect actual +' + +test_expect_success 'add original file back' ' + : >one && + git update-index --add one && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +EOF + test_cmp ls-files.expect ls-files.actual && + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +$BASE +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +replacements: +deletions: 0 +EOF + test_cmp expect actual +' + +test_expect_success 'add new file' ' + : >two && + git update-index --add two && + git ls-files --stage >actual && + cat >expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +EOF + test_cmp expect actual +' + +test_expect_success 'unify index, two files remain' ' + git update-index --no-split-index && + git ls-files --stage >ls-files.actual && + cat >ls-files.expect <<EOF && +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one +100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two +EOF + test_cmp ls-files.expect ls-files.actual + + test-dump-split-index .git/index | sed "/^own/d" >actual && + cat >expect <<EOF && +not a split index +EOF + test_cmp expect actual +' + +test_done diff --git a/t/t2013-checkout-submodule.sh b/t/t2013-checkout-submodule.sh index 06b18f8bc1..6847f75822 100755 --- a/t/t2013-checkout-submodule.sh +++ b/t/t2013-checkout-submodule.sh @@ -3,6 +3,7 @@ test_description='checkout can handle submodules' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh test_expect_success 'setup' ' mkdir submodule && @@ -62,4 +63,8 @@ test_expect_success '"checkout <submodule>" honors submodule.*.ignore from .git/ ! test -s actual ' +test_submodule_switch "git checkout" + +test_submodule_forced_switch "git checkout -f" + test_done diff --git a/t/t2104-update-index-skip-worktree.sh b/t/t2104-update-index-skip-worktree.sh index 29c1fb10ca..cc830da58d 100755 --- a/t/t2104-update-index-skip-worktree.sh +++ b/t/t2104-update-index-skip-worktree.sh @@ -7,6 +7,8 @@ test_description='skip-worktree bit test' . ./test-lib.sh +sane_unset GIT_TEST_SPLIT_INDEX + test_set_index_version 3 cat >expect.full <<EOF diff --git a/t/t3302-notes-index-expensive.sh b/t/t3302-notes-index-expensive.sh index e35d7811ac..8d44e04354 100755 --- a/t/t3302-notes-index-expensive.sh +++ b/t/t3302-notes-index-expensive.sh @@ -7,9 +7,7 @@ test_description='Test commit notes index (expensive!)' . ./test-lib.sh -test_set_prereq NOT_EXPENSIVE test -n "$GIT_NOTES_TIMING_TESTS" && test_set_prereq EXPENSIVE -test -x /usr/bin/time && test_set_prereq USR_BIN_TIME create_repo () { number_of_commits=$1 @@ -17,43 +15,43 @@ create_repo () { test -d .git || { git init && ( - while [ $nr -lt $number_of_commits ]; do + while test $nr -lt $number_of_commits + do nr=$(($nr+1)) mark=$(($nr+$nr)) notemark=$(($mark+1)) test_tick && - cat <<INPUT_END && -commit refs/heads/master -mark :$mark -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -commit #$nr -COMMIT - -M 644 inline file -data <<EOF -file in commit #$nr -EOF - -blob -mark :$notemark -data <<EOF -note for commit #$nr -EOF - -INPUT_END - - echo "N :$notemark :$mark" >> note_commit + cat <<-INPUT_END && + commit refs/heads/master + mark :$mark + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + commit #$nr + COMMIT + + M 644 inline file + data <<EOF + file in commit #$nr + EOF + + blob + mark :$notemark + data <<EOF + note for commit #$nr + EOF + + INPUT_END + echo "N :$notemark :$mark" >>note_commit done && test_tick && - cat <<INPUT_END && -commit refs/notes/commits -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -notes -COMMIT + cat <<-INPUT_END && + commit refs/notes/commits + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + notes + COMMIT -INPUT_END + INPUT_END cat note_commit ) | @@ -65,62 +63,74 @@ INPUT_END test_notes () { count=$1 && git config core.notesRef refs/notes/commits && - git log | grep "^ " > output && + git log | grep "^ " >output && i=$count && - while [ $i -gt 0 ]; do + while test $i -gt 0 + do echo " commit #$i" && echo " note for commit #$i" && - i=$(($i-1)); - done > expect && + i=$(($i-1)) + done >expect && test_cmp expect output } -cat > time_notes << \EOF +write_script time_notes <<\EOF mode=$1 i=1 - while [ $i -lt $2 ]; do + while test $i -lt $2 + do case $1 in no-notes) - GIT_NOTES_REF=non-existing; export GIT_NOTES_REF - ;; + GIT_NOTES_REF=non-existing + export GIT_NOTES_REF + ;; notes) unset GIT_NOTES_REF - ;; + ;; esac - git log >/dev/null + git log i=$(($i+1)) - done + done >/dev/null EOF time_notes () { for mode in no-notes notes do echo $mode - /usr/bin/time "$SHELL_PATH" ../time_notes $mode $1 + /usr/bin/time ../time_notes $mode $1 done } do_tests () { - pr=$1 - count=$2 - - test_expect_success $pr 'setup / mkdir' ' - mkdir $count && - cd $count + count=$1 pr=${2-} + + test_expect_success $pr "setup $count" ' + mkdir "$count" && + ( + cd "$count" && + create_repo "$count" + ) ' - test_expect_success $pr "setup $count" "create_repo $count" - - test_expect_success $pr 'notes work' "test_notes $count" - - test_expect_success USR_BIN_TIME,$pr 'notes timing with /usr/bin/time' "time_notes 100" + test_expect_success $pr 'notes work' ' + ( + cd "$count" && + test_notes "$count" + ) + ' - test_expect_success $pr 'teardown / cd ..' 'cd ..' + test_expect_success "USR_BIN_TIME${pr:+,$pr}" 'notes timing with /usr/bin/time' ' + ( + cd "$count" && + time_notes 100 + ) + ' } -do_tests NOT_EXPENSIVE 10 -for count in 100 1000 10000; do - do_tests EXPENSIVE $count +do_tests 10 +for count in 100 1000 10000 +do + do_tests "$count" EXPENSIVE done test_done diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 80e0a951ea..47b5682662 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -169,6 +169,29 @@ test_expect_success 'default to common base in @{upstream}s reflog if no upstrea test_cmp expect actual ' +test_expect_success 'cherry-picked commits and fork-point work together' ' + git checkout default-base && + echo Amended >A && + git commit -a --no-edit --amend && + test_commit B B && + test_commit new_B B "New B" && + test_commit C C && + git checkout default && + git reset --hard default-base@{4} && + test_commit D D && + git cherry-pick -2 default-base^ && + test_commit final_B B "Final B" && + git rebase && + echo Amended >expect && + test_cmp A expect && + echo "Final B" >expect && + test_cmp B expect && + echo C >expect && + test_cmp C expect && + echo D >expect && + test_cmp D expect +' + test_expect_success 'rebase -q is quiet' ' git checkout -b quiet topic && git rebase -q master >output.out 2>&1 && diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index c0023a5b4f..8197ed29a9 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -67,6 +67,14 @@ test_expect_success 'setup' ' SHELL= export SHELL +test_expect_success 'rebase --keep-empty' ' + git checkout -b emptybranch master && + git commit --allow-empty -m "empty" && + git rebase --keep-empty -i HEAD~2 && + git log --oneline >actual && + test_line_count = 6 actual +' + test_expect_success 'rebase -i with the exec command' ' git checkout master && ( diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh index e70ac10a0c..9292b499f3 100755 --- a/t/t3419-rebase-patch-id.sh +++ b/t/t3419-rebase-patch-id.sh @@ -4,12 +4,9 @@ test_description='git rebase - test patch id computation' . ./test-lib.sh -test_set_prereq NOT_EXPENSIVE test -n "$GIT_PATCHID_TIMING_TESTS" && test_set_prereq EXPENSIVE -test -x /usr/bin/time && test_set_prereq USR_BIN_TIME -count() -{ +count () { i=0 while test $i -lt $1 do @@ -18,8 +15,7 @@ count() done } -scramble() -{ +scramble () { i=0 while read x do @@ -28,12 +24,11 @@ scramble() echo "$x" fi i=$((($i+1) % 10)) - done < "$1" > "$1.new" + done <"$1" >"$1.new" mv -f "$1.new" "$1" } -run() -{ +run () { echo \$ "$@" /usr/bin/time "$@" >/dev/null } @@ -43,10 +38,8 @@ test_expect_success 'setup' ' git tag root ' -do_tests() -{ - pr=$1 - nlines=$2 +do_tests () { + nlines=$1 pr=${2-} test_expect_success $pr "setup: $nlines lines" " rm -f .gitattributes && @@ -103,7 +96,7 @@ do_tests() " } -do_tests NOT_EXPENSIVE 500 -do_tests EXPENSIVE 50000 +do_tests 500 +do_tests 50000 EXPENSIVE test_done diff --git a/t/t3426-rebase-submodule.sh b/t/t3426-rebase-submodule.sh new file mode 100755 index 0000000000..d5b896d445 --- /dev/null +++ b/t/t3426-rebase-submodule.sh @@ -0,0 +1,46 @@ +#!/bin/sh + +test_description='rebase can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + +git_rebase () { + git status -su >expect && + ls -1pR * >>expect && + git checkout -b ours HEAD && + echo x >>file1 && + git add file1 && + git commit -m add_x && + git revert HEAD && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + git rebase "$1" +} + +test_submodule_switch "git_rebase" + +git_rebase_interactive () { + git status -su >expect && + ls -1pR * >>expect && + git checkout -b ours HEAD && + echo x >>file1 && + git add file1 && + git commit -m add_x && + git revert HEAD && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + set_fake_editor && + echo "fake-editor.sh" >.git/info/exclude && + git rebase -i "$1" +} + +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +# The real reason "replace directory with submodule" fails is because a +# directory "sub1" exists, but we reuse the suppression added for merge here +test_submodule_switch "git_rebase_interactive" + +test_done diff --git a/t/t3508-cherry-pick-many-commits.sh b/t/t3508-cherry-pick-many-commits.sh index 19c99d7ef1..b457333e18 100755 --- a/t/t3508-cherry-pick-many-commits.sh +++ b/t/t3508-cherry-pick-many-commits.sh @@ -65,12 +65,15 @@ test_expect_success 'output to keep user entertained during multi-pick' ' cat <<-\EOF >expected && [master OBJID] second Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:14:13 2005 -0700 1 file changed, 1 insertion(+) [master OBJID] third Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 1 file changed, 1 insertion(+) [master OBJID] fourth Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 1 file changed, 1 insertion(+) EOF @@ -98,14 +101,17 @@ test_expect_success 'output during multi-pick indicates merge strategy' ' Trying simple merge. [master OBJID] second Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:14:13 2005 -0700 1 file changed, 1 insertion(+) Trying simple merge. [master OBJID] third Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 1 file changed, 1 insertion(+) Trying simple merge. [master OBJID] fourth Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 1 file changed, 1 insertion(+) EOF diff --git a/t/t3512-cherry-pick-submodule.sh b/t/t3512-cherry-pick-submodule.sh new file mode 100755 index 0000000000..6863b7bb6f --- /dev/null +++ b/t/t3512-cherry-pick-submodule.sh @@ -0,0 +1,13 @@ +#!/bin/sh + +test_description='cherry-pick can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 +test_submodule_switch "git cherry-pick" + +test_done diff --git a/t/t3513-revert-submodule.sh b/t/t3513-revert-submodule.sh new file mode 100755 index 0000000000..a1c4e0216f --- /dev/null +++ b/t/t3513-revert-submodule.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +test_description='revert can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +# Create a revert that moves from HEAD (including any test modifications to +# the work tree) to $1 by first checking out $1 and reverting it. Reverting +# the revert is the transition we test for. We tar the current work tree +# first so we can restore the work tree test setup after doing the checkout +# and revert. We test here that the restored work tree content is identical +# to that at the beginning. The last revert is then tested by the framework. +git_revert () { + git status -su >expect && + ls -1pR * >>expect && + tar czf "$TRASH_DIRECTORY/tmp.tgz" * && + git checkout "$1" && + git revert HEAD && + rm -rf * && + tar xzf "$TRASH_DIRECTORY/tmp.tgz" && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + git revert HEAD +} + +KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +test_submodule_switch "git_revert" + +test_done diff --git a/t/t3901-i18n-patch.sh b/t/t3901-i18n-patch.sh index 31a5770b34..a392f3d1d6 100755 --- a/t/t3901-i18n-patch.sh +++ b/t/t3901-i18n-patch.sh @@ -54,10 +54,13 @@ test_expect_success setup ' git add yours && git commit -s -m "Second on side" && - # the second one on the side branch is ISO-8859-1 - git config i18n.commitencoding ISO8859-1 && - # use author and committer name in ISO-8859-1 to match it. - . "$TEST_DIRECTORY"/t3901-8859-1.txt && + if test_have_prereq !MINGW + then + # the second one on the side branch is ISO-8859-1 + git config i18n.commitencoding ISO8859-1 && + # use author and committer name in ISO-8859-1 to match it. + . "$TEST_DIRECTORY"/t3901-8859-1.txt + fi && test_tick && echo Yet another >theirs && git add theirs && @@ -119,7 +122,7 @@ test_expect_success 'rebase (U/L)' ' check_encoding 2 ' -test_expect_success 'rebase (L/L)' ' +test_expect_success !MINGW 'rebase (L/L)' ' # In this test we want ISO-8859-1 encoded commits as the result git config i18n.commitencoding ISO8859-1 && git config i18n.logoutputencoding ISO8859-1 && @@ -131,7 +134,7 @@ test_expect_success 'rebase (L/L)' ' check_encoding 2 8859 ' -test_expect_success 'rebase (L/U)' ' +test_expect_success !MINGW 'rebase (L/U)' ' # This is pathological -- use UTF-8 as intermediate form # to get ISO-8859-1 results. git config i18n.commitencoding ISO8859-1 && @@ -159,7 +162,7 @@ test_expect_success 'cherry-pick(U/U)' ' check_encoding 3 ' -test_expect_success 'cherry-pick(L/L)' ' +test_expect_success !MINGW 'cherry-pick(L/L)' ' # Both the commitencoding and logoutputencoding is set to ISO-8859-1 git config i18n.commitencoding ISO8859-1 && @@ -189,7 +192,7 @@ test_expect_success 'cherry-pick(U/L)' ' check_encoding 3 ' -test_expect_success 'cherry-pick(L/U)' ' +test_expect_success !MINGW 'cherry-pick(L/U)' ' # Again, the commitencoding is set to ISO-8859-1 but # logoutputencoding is set to UTF-8. diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 5b79b216e2..1e29962fad 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -685,4 +685,46 @@ test_expect_success 'handle stash specification with spaces' ' grep pig file ' +test_expect_success 'setup stash with index and worktree changes' ' + git stash clear && + git reset --hard && + echo index >file && + git add file && + echo working >file && + git stash +' + +test_expect_success 'stash list implies --first-parent -m' ' + cat >expect <<-\EOF && + stash@{0}: WIP on master: b27a2bc subdir + + diff --git a/file b/file + index 257cc56..d26b33d 100644 + --- a/file + +++ b/file + @@ -1 +1 @@ + -foo + +working + EOF + git stash list -p >actual && + test_cmp expect actual +' + +test_expect_success 'stash list --cc shows combined diff' ' + cat >expect <<-\EOF && + stash@{0}: WIP on master: b27a2bc subdir + + diff --cc file + index 257cc56,9015a7a..d26b33d + --- a/file + +++ b/file + @@@ -1,1 -1,1 +1,1 @@@ + - foo + -index + ++working + EOF + git stash list -p --cc >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index a5e7e6b2ba..f372fc8ca8 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -96,8 +96,8 @@ test_expect_success 'stash pop after save --include-untracked leaves files untra git stash pop && git status --porcelain >actual && test_cmp expect actual && - test "1" = "`cat file2`" && - test untracked = "`cat untracked/untracked`" + test "1" = "$(cat file2)" && + test untracked = "$(cat untracked/untracked)" ' git clean --force --quiet -d diff --git a/t/t3906-stash-submodule.sh b/t/t3906-stash-submodule.sh new file mode 100755 index 0000000000..d7219d6f8f --- /dev/null +++ b/t/t3906-stash-submodule.sh @@ -0,0 +1,24 @@ +#!/bin/sh + +test_description='stash apply can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +git_stash () { + git status -su >expect && + ls -1pR * >>expect && + git read-tree -u -m "$1" && + git stash && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + git stash apply +} + +KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES=1 +KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +test_submodule_switch "git_stash" + +test_done diff --git a/t/t3910-mac-os-precompose.sh b/t/t3910-mac-os-precompose.sh index e4ba6013e4..831935665e 100755 --- a/t/t3910-mac-os-precompose.sh +++ b/t/t3910-mac-os-precompose.sh @@ -14,13 +14,13 @@ then fi # create utf-8 variables -Adiarnfc=`printf '\303\204'` -Adiarnfd=`printf 'A\314\210'` +Adiarnfc=$(printf '\303\204') +Adiarnfd=$(printf 'A\314\210') -Odiarnfc=`printf '\303\226'` -Odiarnfd=`printf 'O\314\210'` -AEligatu=`printf '\303\206'` -Invalidu=`printf '\303\377'` +Odiarnfc=$(printf '\303\226') +Odiarnfd=$(printf 'O\314\210') +AEligatu=$(printf '\303\206') +Invalidu=$(printf '\303\377') #Create a string with 255 bytes (decomposed) @@ -35,7 +35,7 @@ Alongc=$Alongc$Alongc$Alongc$Alongc$Alongc #250 Byte Alongc=$Alongc$AEligatu$AEligatu #254 Byte test_expect_success "detect if nfd needed" ' - precomposeunicode=`git config core.precomposeunicode` && + precomposeunicode=$(git config core.precomposeunicode) && test "$precomposeunicode" = true && git config core.precomposeunicode true ' @@ -140,13 +140,23 @@ test_expect_success "Add long precomposed filename" ' git add * && git commit -m "Long filename" ' + +test_expect_failure 'handle existing decomposed filenames' ' + echo content >"verbatim.$Adiarnfd" && + git -c core.precomposeunicode=false add "verbatim.$Adiarnfd" && + git commit -m "existing decomposed file" && + >expect && + git ls-files --exclude-standard -o "verbatim*" >untracked && + test_cmp expect untracked +' + # Test if the global core.precomposeunicode stops autosensing # Must be the last test case test_expect_success "respect git config --global core.precomposeunicode" ' git config --global core.precomposeunicode true && rm -rf .git && git init && - precomposeunicode=`git config core.precomposeunicode` && + precomposeunicode=$(git config core.precomposeunicode) && test "$precomposeunicode" = "true" ' diff --git a/t/t4006-diff-mode.sh b/t/t4006-diff-mode.sh index 05911492ca..76f643b2c2 100755 --- a/t/t4006-diff-mode.sh +++ b/t/t4006-diff-mode.sh @@ -13,7 +13,7 @@ sed_script='s/\(:100644 100755\) \('"$_x40"'\) \2 /\1 X X /' test_expect_success 'setup' ' echo frotz >rezrov && git update-index --add rezrov && - tree=`git write-tree` && + tree=$(git write-tree) && echo $tree ' diff --git a/t/t4010-diff-pathspec.sh b/t/t4010-diff-pathspec.sh index 2bb973655b..bf07841866 100755 --- a/t/t4010-diff-pathspec.sh +++ b/t/t4010-diff-pathspec.sh @@ -18,7 +18,7 @@ test_expect_success \ mkdir path1 && echo rezrov >path1/file1 && git update-index --add file0 path1/file1 && - tree=`git write-tree` && + tree=$(git write-tree) && echo "$tree" && echo nitfol >file0 && echo yomin >path1/file1 && @@ -131,7 +131,7 @@ test_expect_success 'diff multiple wildcard pathspecs' ' mkdir path2 && echo rezrov >path2/file1 && git update-index --add path2/file1 && - tree3=`git write-tree` && + tree3=$(git write-tree) && git diff --name-only $tree $tree3 -- "path2*1" "path1*1" >actual && cat <<-\EOF >expect && path1/file1 diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh index 1215ae544b..643d729157 100755 --- a/t/t4012-diff-binary.sh +++ b/t/t4012-diff-binary.sh @@ -67,18 +67,18 @@ test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' git diff >output && sed -e "s/-CIT/xCIT/" <output >broken && test_must_fail git apply --stat --summary broken 2>detected && - detected=`cat detected` && - detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && - detected=`sed -ne "${detected}p" broken` && + detected=$(cat detected) && + detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' git diff --binary | sed -e "s/-CIT/xCIT/" >broken && test_must_fail git apply --stat --summary broken 2>detected && - detected=`cat detected` && - detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && - detected=`sed -ne "${detected}p" broken` && + detected=$(cat detected) && + detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' @@ -88,7 +88,7 @@ test_expect_success 'initial commit' 'git commit -a -m initial' test_expect_success 'diff-index with --binary' ' echo AIT >a && mv b e && echo CIT >c && cat e >d && git update-index --add --remove a b c d e && - tree0=`git write-tree` && + tree0=$(git write-tree) && git diff --cached --binary >current && git apply --stat --summary current ' @@ -96,7 +96,7 @@ test_expect_success 'diff-index with --binary' ' test_expect_success 'apply binary patch' ' git reset --hard && git apply --binary --index <current && - tree1=`git write-tree` && + tree1=$(git write-tree) && test "$tree1" = "$tree0" ' diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index f7a9af893b..6ec6072118 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -107,14 +107,14 @@ test_expect_success setup ' +*++ [initial] Initial EOF -V=`git version | sed -e 's/^git version //' -e 's/\./\\./g'` +V=$(git version | sed -e 's/^git version //' -e 's/\./\\./g') while read cmd do case "$cmd" in '' | '#'*) continue ;; esac - test=`echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g'` - pfx=`printf "%04d" $test_count` + test=$(echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g') + pfx=$(printf "%04d" $test_count) expect="$TEST_DIRECTORY/t4013/diff.$test" actual="$pfx-diff.$test" diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 9c80633146..256affce89 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -43,7 +43,7 @@ test_expect_success setup ' test_expect_success "format-patch --ignore-if-in-upstream" ' git format-patch --stdout master..side >patch0 && - cnt=`grep "^From " patch0 | wc -l` && + cnt=$(grep "^From " patch0 | wc -l) && test $cnt = 3 ' @@ -52,7 +52,7 @@ test_expect_success "format-patch --ignore-if-in-upstream" ' git format-patch --stdout \ --ignore-if-in-upstream master..side >patch1 && - cnt=`grep "^From " patch1 | wc -l` && + cnt=$(grep "^From " patch1 | wc -l) && test $cnt = 2 ' @@ -69,7 +69,7 @@ test_expect_success "format-patch doesn't consider merge commits" ' git checkout -b merger master && test_tick && git merge --no-ff slave && - cnt=`git format-patch -3 --stdout | grep "^From " | wc -l` && + cnt=$(git format-patch -3 --stdout | grep "^From " | wc -l) && test $cnt = 3 ' @@ -77,7 +77,7 @@ test_expect_success "format-patch result applies" ' git checkout -b rebuild-0 master && git am -3 patch0 && - cnt=`git rev-list master.. | wc -l` && + cnt=$(git rev-list master.. | wc -l) && test $cnt = 2 ' @@ -85,7 +85,7 @@ test_expect_success "format-patch --ignore-if-in-upstream result applies" ' git checkout -b rebuild-1 master && git am -3 patch1 && - cnt=`git rev-list master.. | wc -l` && + cnt=$(git rev-list master.. | wc -l) && test $cnt = 2 ' @@ -762,6 +762,67 @@ test_expect_success 'format-patch --signature="" suppresses signatures' ' ! grep "^-- \$" output ' +test_expect_success 'prepare mail-signature input' ' + cat >mail-signature <<-\EOF + + Test User <test.email@kernel.org> + http://git.kernel.org/cgit/git/git.git + + git.kernel.org/?p=git/git.git;a=summary + + EOF +' + +test_expect_success '--signature-file=file works' ' + git format-patch --stdout --signature-file=mail-signature -1 >output && + check_patch output && + sed -e "1,/^-- \$/d" <output >actual && + { + cat mail-signature && echo + } >expect && + test_cmp expect actual +' + +test_expect_success 'format.signaturefile works' ' + test_config format.signaturefile mail-signature && + git format-patch --stdout -1 >output && + check_patch output && + sed -e "1,/^-- \$/d" <output >actual && + { + cat mail-signature && echo + } >expect && + test_cmp expect actual +' + +test_expect_success '--no-signature suppresses format.signaturefile ' ' + test_config format.signaturefile mail-signature && + git format-patch --stdout --no-signature -1 >output && + check_patch output && + ! grep "^-- \$" output +' + +test_expect_success '--signature-file overrides format.signaturefile' ' + cat >other-mail-signature <<-\EOF + Use this other signature instead of mail-signature. + EOF + test_config format.signaturefile mail-signature && + git format-patch --stdout \ + --signature-file=other-mail-signature -1 >output && + check_patch output && + sed -e "1,/^-- \$/d" <output >actual && + { + cat other-mail-signature && echo + } >expect && + test_cmp expect actual +' + +test_expect_success '--signature overrides format.signaturefile' ' + test_config format.signaturefile mail-signature && + git format-patch --stdout --signature="my sig" -1 >output && + check_patch output && + grep "my sig" output +' + test_expect_success TTY 'format-patch --stdout paginates' ' rm -f pager_used && test_terminal env GIT_PAGER="wc >pager_used" git format-patch --stdout --all && diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index 34591c23da..1dbaa3864a 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -52,15 +52,15 @@ do echo "*.java diff=$p" >.gitattributes && test_expect_code 1 git diff --no-index \ A.java B.java 2>msg && - ! test_i18ngrep fatal msg && - ! test_i18ngrep error msg + test_i18ngrep ! fatal msg && + test_i18ngrep ! error msg ' test_expect_success "builtin $p wordRegex pattern compiles" ' echo "*.java diff=$p" >.gitattributes && test_expect_code 1 git diff --no-index --word-diff \ A.java B.java 2>msg && - ! test_i18ngrep fatal msg && - ! test_i18ngrep error msg + test_i18ngrep ! fatal msg && + test_i18ngrep ! error msg ' done diff --git a/t/t4036-format-patch-signer-mime.sh b/t/t4036-format-patch-signer-mime.sh index ba43f18549..98d9713d8b 100755 --- a/t/t4036-format-patch-signer-mime.sh +++ b/t/t4036-format-patch-signer-mime.sh @@ -42,7 +42,7 @@ test_expect_success 'attach and signoff do not duplicate mime headers' ' GIT_COMMITTER_NAME="はまの ふにおう" \ git format-patch -s --stdout -1 --attach >output && - test `grep -ci ^MIME-Version: output` = 1 + test $(grep -ci ^MIME-Version: output) = 1 ' diff --git a/t/t4038-diff-combined.sh b/t/t4038-diff-combined.sh index 1019d7b35f..0b4f7dfdc6 100755 --- a/t/t4038-diff-combined.sh +++ b/t/t4038-diff-combined.sh @@ -94,7 +94,7 @@ test_expect_success 'setup for --cc --raw' ' blob=$(echo file | git hash-object --stdin -w) && base_tree=$(echo "100644 blob $blob file" | git mktree) && trees= && - for i in `test_seq 1 40` + for i in $(test_seq 1 40) do blob=$(echo file$i | git hash-object --stdin -w) && trees="$trees$(echo "100644 blob $blob file" | git mktree)$LF" @@ -401,4 +401,38 @@ test_expect_success 'combine diff missing delete bug' ' compare_diff_patch expected actual ' +test_expect_success 'combine diff gets tree sorting right' ' + # create a directory and a file that sort differently in trees + # versus byte-wise (implied "/" sorts after ".") + git checkout -f master && + mkdir foo && + echo base >foo/one && + echo base >foo/two && + echo base >foo.ext && + git add foo foo.ext && + git commit -m base && + + # one side modifies a file in the directory, along with the root + # file... + echo master >foo/one && + echo master >foo.ext && + git commit -a -m master && + + # the other side modifies the other file in the directory + git checkout -b other HEAD^ && + echo other >foo/two && + git commit -a -m other && + + # And now we merge. The files in the subdirectory will resolve cleanly, + # meaning that a combined diff will not find them interesting. But it + # will find the tree itself interesting, because it had to be merged. + git checkout master && + git merge other && + + printf "MM\tfoo\n" >expect && + git diff-tree -c --name-status -t HEAD >actual.tmp && + sed 1d <actual.tmp >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4041-diff-submodule-option.sh b/t/t4041-diff-submodule-option.sh index 463d63bde0..e4328964a7 100755 --- a/t/t4041-diff-submodule-option.sh +++ b/t/t4041-diff-submodule-option.sh @@ -26,8 +26,10 @@ add_file () { echo "$name" >"$name" && git add "$name" && test_tick && - msg_added_iso88591=$(echo "Add $name ($added $name)" | iconv -f utf-8 -t $test_encoding) && - git -c "i18n.commitEncoding=$test_encoding" commit -m "$msg_added_iso88591" + # "git commit -m" would break MinGW, as Windows refuse to pass + # $test_encoding encoded parameter to git. + echo "Add $name ($added $name)" | iconv -f utf-8 -t $test_encoding | + git -c "i18n.commitEncoding=$test_encoding" commit -F - done >/dev/null && git rev-parse --short --verify HEAD ) diff --git a/t/t4057-diff-combined-paths.sh b/t/t4057-diff-combined-paths.sh index 097e63215e..dff36b77ec 100755 --- a/t/t4057-diff-combined-paths.sh +++ b/t/t4057-diff-combined-paths.sh @@ -5,7 +5,7 @@ test_description='combined diff show only paths that are different to all parent . ./test-lib.sh # verify that diffc.expect matches output of -# `git diff -c --name-only HEAD HEAD^ HEAD^2` +# $(git diff -c --name-only HEAD HEAD^ HEAD^2) diffc_verify () { git diff -c --name-only HEAD HEAD^ HEAD^2 >diffc.actual && test_cmp diffc.expect diffc.actual diff --git a/t/t4102-apply-rename.sh b/t/t4102-apply-rename.sh index 49e2d6c349..fae305979a 100755 --- a/t/t4102-apply-rename.sh +++ b/t/t4102-apply-rename.sh @@ -52,6 +52,6 @@ EOF test_expect_success 'apply copy' \ 'git apply --index --stat --summary --apply test-patch && - test "$(cat bar)" = "This is bar" -a "$(cat foo)" = "This is foo"' + test "$(cat bar)" = "This is bar" && test "$(cat foo)" = "This is foo"' test_done diff --git a/t/t4116-apply-reverse.sh b/t/t4116-apply-reverse.sh index 1e4d4380bf..ce8567f496 100755 --- a/t/t4116-apply-reverse.sh +++ b/t/t4116-apply-reverse.sh @@ -30,10 +30,10 @@ test_expect_success setup ' test_expect_success 'apply in forward' ' - T0=`git rev-parse "second^{tree}"` && + T0=$(git rev-parse "second^{tree}") && git reset --hard initial && git apply --index --binary patch && - T1=`git write-tree` && + T1=$(git write-tree) && test "$T0" = "$T1" ' @@ -62,22 +62,22 @@ test_expect_success 'setup separate repository lacking postimage' ' test_expect_success 'apply in forward without postimage' ' - T0=`git rev-parse "second^{tree}"` && + T0=$(git rev-parse "second^{tree}") && ( cd initial && git apply --index --binary ../patch && - T1=`git write-tree` && + T1=$(git write-tree) && test "$T0" = "$T1" ) ' test_expect_success 'apply in reverse without postimage' ' - T0=`git rev-parse "initial^{tree}"` && + T0=$(git rev-parse "initial^{tree}") && ( cd second && git apply --index --binary --reverse ../patch && - T1=`git write-tree` && + T1=$(git write-tree) && test "$T0" = "$T1" ) ' diff --git a/t/t4119-apply-config.sh b/t/t4119-apply-config.sh index 3d0384daa8..a9a0583811 100755 --- a/t/t4119-apply-config.sh +++ b/t/t4119-apply-config.sh @@ -68,7 +68,7 @@ test_expect_success 'apply --whitespace=strip from config' ' check_result sub/file1 ' -D=`pwd` +D=$(pwd) test_expect_success 'apply --whitespace=strip in subdir' ' @@ -159,4 +159,21 @@ test_expect_success 'same but with traditional patch input of depth 2' ' check_result sub/file1 ' +test_expect_success 'in subdir with traditional patch input' ' + cd "$D" && + git config apply.whitespace strip && + cat >.gitattributes <<-EOF && + /* whitespace=blank-at-eol + sub/* whitespace=-blank-at-eol + EOF + rm -f sub/file1 && + cp saved sub/file1 && + git update-index --refresh && + + cd sub && + git apply ../gpatch.file && + echo "B " >expect && + test_cmp expect file1 +' + test_done diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index 5d0c598338..c6474de4c8 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -512,4 +512,15 @@ test_expect_success 'whitespace=fix to expand' ' git -c core.whitespace=tab-in-indent apply --whitespace=fix patch ' +test_expect_success 'whitespace check skipped for excluded paths' ' + git config core.whitespace blank-at-eol && + >used && + >unused && + git add used unused && + echo "used" >used && + echo "unused " >unused && + git diff-files -p used unused >patch && + git apply --include=used --stat --whitespace=error <patch +' + test_done diff --git a/t/t4137-apply-submodule.sh b/t/t4137-apply-submodule.sh new file mode 100755 index 0000000000..a9bd40a6d0 --- /dev/null +++ b/t/t4137-apply-submodule.sh @@ -0,0 +1,20 @@ +#!/bin/sh + +test_description='git apply handling submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +apply_index () { + git diff --ignore-submodules=dirty "..$1" | git apply --index - +} + +test_submodule_switch "apply_index" + +apply_3way () { + git diff --ignore-submodules=dirty "..$1" | git apply --3way - +} + +test_submodule_switch "apply_3way" + +test_done diff --git a/t/t4201-shortlog.sh b/t/t4201-shortlog.sh index 97fcb31d6e..7600a3e3e8 100755 --- a/t/t4201-shortlog.sh +++ b/t/t4201-shortlog.sh @@ -93,7 +93,7 @@ test_expect_success 'output from user-defined format is re-wrapped' ' test_cmp expect log.predictable ' -test_expect_success 'shortlog wrapping' ' +test_expect_success !MINGW 'shortlog wrapping' ' cat >expect <<\EOF && A U Thor (5): Test @@ -114,7 +114,7 @@ EOF test_cmp expect out ' -test_expect_success 'shortlog from non-git directory' ' +test_expect_success !MINGW 'shortlog from non-git directory' ' git log HEAD >log && GIT_DIR=non-existing git shortlog -w <log >out && test_cmp expect out @@ -159,7 +159,7 @@ $DSCHO (2): EOF -test_expect_success 'shortlog encoding' ' +test_expect_success !MINGW 'shortlog encoding' ' git reset --hard "$commit" && git config --unset i18n.commitencoding && echo 2 > a1 && diff --git a/t/t4204-patch-id.sh b/t/t4204-patch-id.sh index d2c930de87..baa9d3c82e 100755 --- a/t/t4204-patch-id.sh +++ b/t/t4204-patch-id.sh @@ -5,27 +5,44 @@ test_description='git patch-id' . ./test-lib.sh test_expect_success 'setup' ' - test_commit initial foo a && - test_commit first foo b && - git checkout -b same HEAD^ && - test_commit same-msg foo b && - git checkout -b notsame HEAD^ && - test_commit notsame-msg foo c + as="a a a a a a a a" && # eight a + test_write_lines $as >foo && + test_write_lines $as >bar && + git add foo bar && + git commit -a -m initial && + test_write_lines $as b >foo && + test_write_lines $as b >bar && + git commit -a -m first && + git checkout -b same master && + git commit --amend -m same-msg && + git checkout -b notsame master && + echo c >foo && + echo c >bar && + git commit --amend -a -m notsame-msg && + test_write_lines bar foo >bar-then-foo && + test_write_lines foo bar >foo-then-bar ' test_expect_success 'patch-id output is well-formed' ' - git log -p -1 | git patch-id > output && + git log -p -1 | git patch-id >output && grep "^[a-f0-9]\{40\} $(git rev-parse HEAD)$" output ' +#calculate patch id. Make sure output is not empty. calc_patch_id () { - git patch-id | - sed "s# .*##" > patch-id_"$1" + name="$1" + shift + git patch-id "$@" | + sed "s/ .*//" >patch-id_"$name" && + test_line_count -gt 0 patch-id_"$name" +} + +get_top_diff () { + git log -p -1 "$@" -O bar-then-foo -- } get_patch_id () { - git log -p -1 "$1" | git patch-id | - sed "s# .*##" > patch-id_"$1" + get_top_diff "$1" | calc_patch_id "$@" } test_expect_success 'patch-id detects equality' ' @@ -45,8 +62,8 @@ test_expect_success 'patch-id supports git-format-patch output' ' git checkout same && git format-patch -1 --stdout | calc_patch_id same && test_cmp patch-id_master patch-id_same && - set `git format-patch -1 --stdout | git patch-id` && - test "$2" = `git rev-parse HEAD` + set $(git format-patch -1 --stdout | git patch-id) && + test "$2" = $(git rev-parse HEAD) ' test_expect_success 'whitespace is irrelevant in footer' ' @@ -56,6 +73,69 @@ test_expect_success 'whitespace is irrelevant in footer' ' test_cmp patch-id_master patch-id_same ' +cmp_patch_id () { + if + test "$1" = "relevant" + then + ! test_cmp patch-id_"$2" patch-id_"$3" + else + test_cmp patch-id_"$2" patch-id_"$3" + fi +} + +test_patch_id_file_order () { + relevant="$1" + shift + name="order-${1}-$relevant" + shift + get_top_diff "master" | calc_patch_id "$name" "$@" && + git checkout same && + git format-patch -1 --stdout -O foo-then-bar | + calc_patch_id "ordered-$name" "$@" && + cmp_patch_id $relevant "$name" "ordered-$name" + +} + +# combined test for options: add more tests here to make them +# run with all options +test_patch_id () { + test_patch_id_file_order "$@" +} + +# small tests with detailed diagnostic for basic options. +test_expect_success 'file order is irrelevant with --stable' ' + test_patch_id_file_order irrelevant --stable --stable +' + +test_expect_success 'file order is relevant with --unstable' ' + test_patch_id_file_order relevant --unstable --unstable +' + +#Now test various option combinations. +test_expect_success 'default is unstable' ' + test_patch_id relevant default +' + +test_expect_success 'patchid.stable = true is stable' ' + test_config patchid.stable true && + test_patch_id irrelevant patchid.stable=true +' + +test_expect_success 'patchid.stable = false is unstable' ' + test_config patchid.stable false && + test_patch_id relevant patchid.stable=false +' + +test_expect_success '--unstable overrides patchid.stable = true' ' + test_config patchid.stable true && + test_patch_id relevant patchid.stable=true--unstable --unstable +' + +test_expect_success '--stable overrides patchid.stable = false' ' + test_config patchid.stable false && + test_patch_id irrelevant patchid.stable=false--stable --stable +' + test_expect_success 'patch-id supports git-format-patch MIME output' ' get_patch_id master && git checkout same && diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index c84ec9ae61..de0cc4a0fd 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -31,7 +31,7 @@ test_expect_success 'set up basic repos' ' git add foo && test_tick && git config i18n.commitEncoding $test_encoding && - git commit -m "$(commit_msg $test_encoding)" && + commit_msg $test_encoding | git commit -F - && git add bar && test_tick && git commit -m "add bar" && @@ -431,6 +431,13 @@ EOF test_cmp expected actual ' +test_expect_success 'strbuf_utf8_replace() not producing NUL' ' + git log --color --pretty="tformat:%<(10,trunc)%s%>>(10,ltrunc)%C(auto)%d" | + test_decode_color | + nul_to_q >actual && + ! grep Q actual +' + # get new digests (with no abbreviations) head1=$(git rev-parse --verify HEAD~0) && head2=$(git rev-parse --verify HEAD~1) && diff --git a/t/t4210-log-i18n.sh b/t/t4210-log-i18n.sh index 52a74729ba..e585fe6129 100755 --- a/t/t4210-log-i18n.sh +++ b/t/t4210-log-i18n.sh @@ -34,7 +34,7 @@ test_expect_success 'log --grep searches in log output encoding (utf8)' ' test_cmp expect actual ' -test_expect_success 'log --grep searches in log output encoding (latin1)' ' +test_expect_success !MINGW 'log --grep searches in log output encoding (latin1)' ' cat >expect <<-\EOF && latin1 utf8 @@ -43,7 +43,7 @@ test_expect_success 'log --grep searches in log output encoding (latin1)' ' test_cmp expect actual ' -test_expect_success 'log --grep does not find non-reencoded values (utf8)' ' +test_expect_success !MINGW 'log --grep does not find non-reencoded values (utf8)' ' >expect && git log --encoding=utf8 --format=%s --grep=$latin1_e >actual && test_cmp expect actual diff --git a/t/t4255-am-submodule.sh b/t/t4255-am-submodule.sh new file mode 100755 index 0000000000..8bde7dbb6d --- /dev/null +++ b/t/t4255-am-submodule.sh @@ -0,0 +1,21 @@ +#!/bin/sh + +test_description='git am handling submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +am () { + git format-patch --stdout --ignore-submodules=dirty "..$1" | git am - +} + +test_submodule_switch "am" + +am_3way () { + git format-patch --stdout --ignore-submodules=dirty "..$1" | git am --3way - +} + +KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 +test_submodule_switch "am_3way" + +test_done diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 4efaf8c58e..7b8babd89b 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -72,7 +72,7 @@ check_tar() { for header in *.paxheader do data=${header%.paxheader}.data && - if test -h $data -o -e $data + if test -h $data || test -e $data then path=$(get_pax_header $header path) && if test -n "$path" @@ -119,14 +119,10 @@ test_expect_success \ 'echo ignore me >a/ignored && echo ignored export-ignore >.git/info/attributes' -test_expect_success \ - 'add files to repository' \ - 'find a -type f | xargs git update-index --add && - find a -type l | xargs git update-index --add && - treeid=`git write-tree` && - echo $treeid >treeid && - git update-ref HEAD $(TZ=GMT GIT_COMMITTER_DATE="2005-05-27 22:00:00" \ - git commit-tree $treeid </dev/null)' +test_expect_success 'add files to repository' ' + git add a && + GIT_COMMITTER_DATE="2005-05-27 22:00" git commit -m initial +' test_expect_success 'setup export-subst' ' echo "substfile?" export-subst >>.git/info/attributes && @@ -207,7 +203,7 @@ test_expect_success \ test_expect_success 'clients cannot access unreachable commits' ' test_commit unreachable && - sha1=`git rev-parse HEAD` && + sha1=$(git rev-parse HEAD) && git reset --hard HEAD^ && git archive $sha1 >remote.tar && test_must_fail git archive --remote=. $sha1 >remote.tar @@ -215,7 +211,7 @@ test_expect_success 'clients cannot access unreachable commits' ' test_expect_success 'upload-archive can allow unreachable commits' ' test_commit unreachable1 && - sha1=`git rev-parse HEAD` && + sha1=$(git rev-parse HEAD) && git reset --hard HEAD^ && git archive $sha1 >remote.tar && test_config uploadarchive.allowUnreachable true && diff --git a/t/t5003-archive-zip.sh b/t/t5003-archive-zip.sh index 21a5c93f41..c929db5633 100755 --- a/t/t5003-archive-zip.sh +++ b/t/t5003-archive-zip.sh @@ -61,14 +61,10 @@ test_expect_success \ 'echo ignore me >a/ignored && echo ignored export-ignore >.git/info/attributes' -test_expect_success \ - 'add files to repository' \ - 'find a -type f | xargs git update-index --add && - find a -type l | xargs git update-index --add && - treeid=`git write-tree` && - echo $treeid >treeid && - git update-ref HEAD $(TZ=GMT GIT_COMMITTER_DATE="2005-05-27 22:00:00" \ - git commit-tree $treeid </dev/null)' +test_expect_success 'add files to repository' ' + git add a && + GIT_COMMITTER_DATE="2005-05-27 22:00" git commit -m initial +' test_expect_success 'setup export-subst' ' echo "substfile?" export-subst >>.git/info/attributes && diff --git a/t/t5004-archive-corner-cases.sh b/t/t5004-archive-corner-cases.sh index 305bcac6b7..83d20c4ba9 100755 --- a/t/t5004-archive-corner-cases.sh +++ b/t/t5004-archive-corner-cases.sh @@ -113,4 +113,9 @@ test_expect_success 'archive empty subtree by direct pathspec' ' check_dir extract sub ' +test_expect_success 'archive applies umask even for pax headers' ' + git archive --format=tar HEAD >archive.tar && + ! grep 0666 archive.tar +' + test_done diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index f4f02ba918..0580258c91 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -18,7 +18,7 @@ test_expect_success 'setup repo with moderate-sized history' ' git checkout master && blob=$(echo tagged-blob | git hash-object -w --stdin) && git tag tagged-blob $blob && - git config pack.writebitmaps true && + git config repack.writebitmaps true && git config pack.writebitmaphashcache true ' diff --git a/t/t5311-pack-bitmaps-shallow.sh b/t/t5311-pack-bitmaps-shallow.sh new file mode 100755 index 0000000000..872a95df33 --- /dev/null +++ b/t/t5311-pack-bitmaps-shallow.sh @@ -0,0 +1,39 @@ +#!/bin/sh + +test_description='check bitmap operation with shallow repositories' +. ./test-lib.sh + +# We want to create a situation where the shallow, grafted +# view of reachability does not match reality in a way that +# might cause us to send insufficient objects. +# +# We do this with a history that repeats a state, like: +# +# A -- B -- C +# file=1 file=2 file=1 +# +# and then create a shallow clone to the second commit, B. +# In a non-shallow clone, that would mean we already have +# the tree for A. But in a shallow one, we've grafted away +# A, and fetching A to B requires that the other side send +# us the tree for file=1. +test_expect_success 'setup shallow repo' ' + echo 1 >file && + git add file && + git commit -m orig && + echo 2 >file && + git commit -a -m update && + git clone --no-local --bare --depth=1 . shallow.git && + echo 1 >file && + git commit -a -m repeat +' + +test_expect_success 'turn on bitmaps in the parent' ' + git repack -adb +' + +test_expect_success 'shallow fetch from bitmapped repo' ' + (cd shallow.git && git fetch) +' + +test_done diff --git a/t/t5403-post-checkout-hook.sh b/t/t5403-post-checkout-hook.sh index 1753ef2b91..fc898c9eac 100755 --- a/t/t5403-post-checkout-hook.sh +++ b/t/t5403-post-checkout-hook.sh @@ -39,7 +39,7 @@ test_expect_success 'post-checkout receives the right arguments with HEAD unchan old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && - test $old = $new -a $flag = 1 + test $old = $new && test $flag = 1 ' test_expect_success 'post-checkout runs as expected ' ' @@ -52,7 +52,7 @@ test_expect_success 'post-checkout args are correct with git checkout -b ' ' old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && - test $old = $new -a $flag = 1 + test $old = $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args with HEAD changed ' ' @@ -60,7 +60,7 @@ test_expect_success 'post-checkout receives the right args with HEAD changed ' ' old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && - test $old != $new -a $flag = 1 + test $old != $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args when not switching branches ' ' @@ -68,7 +68,7 @@ test_expect_success 'post-checkout receives the right args when not switching br old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && - test $old = $new -a $flag = 0 + test $old = $new && test $flag = 0 ' if test "$(git config --bool core.filemode)" = true; then diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 29d59ef9fa..d78f3201f4 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -447,6 +447,43 @@ test_expect_success 'explicit pull should update tracking' ' ) ' +test_expect_success 'explicit --refmap is allowed only with command-line refspec' ' + cd "$D" && + ( + cd three && + test_must_fail git fetch --refmap="*:refs/remotes/none/*" + ) +' + +test_expect_success 'explicit --refmap option overrides remote.*.fetch' ' + cd "$D" && + git branch -f side && + ( + cd three && + git update-ref refs/remotes/origin/master base-origin-master && + o=$(git rev-parse --verify refs/remotes/origin/master) && + git fetch --refmap="refs/heads/*:refs/remotes/other/*" origin master && + n=$(git rev-parse --verify refs/remotes/origin/master) && + test "$o" = "$n" && + test_must_fail git rev-parse --verify refs/remotes/origin/side && + git rev-parse --verify refs/remotes/other/master + ) +' + +test_expect_success 'explicitly empty --refmap option disables remote.*.fetch' ' + cd "$D" && + git branch -f side && + ( + cd three && + git update-ref refs/remotes/origin/master base-origin-master && + o=$(git rev-parse --verify refs/remotes/origin/master) && + git fetch --refmap="" origin master && + n=$(git rev-parse --verify refs/remotes/origin/master) && + test "$o" = "$n" && + test_must_fail git rev-parse --verify refs/remotes/origin/side + ) +' + test_expect_success 'configured fetch updates tracking' ' cd "$D" && diff --git a/t/t5511-refspec.sh b/t/t5511-refspec.sh index c28932216b..de6db86ccf 100755 --- a/t/t5511-refspec.sh +++ b/t/t5511-refspec.sh @@ -5,7 +5,6 @@ test_description='refspec parsing' . ./test-lib.sh test_refspec () { - kind=$1 refspec=$2 expect=$3 git config remote.frotz.url "." && git config --remove-section remote.frotz && @@ -84,4 +83,9 @@ test_refspec push 'refs/heads/*/*/for-linus:refs/remotes/mine/*' invalid test_refspec fetch 'refs/heads/*/for-linus:refs/remotes/mine/*' test_refspec push 'refs/heads/*/for-linus:refs/remotes/mine/*' +good=$(printf '\303\204') +test_refspec fetch "refs/heads/${good}" +bad=$(printf '\011tab') +test_refspec fetch "refs/heads/${bad}" invalid + test_done diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh index 94553e1039..b46118846c 100755 --- a/t/t5539-fetch-http-shallow.sh +++ b/t/t5539-fetch-http-shallow.sh @@ -54,6 +54,7 @@ EOF test_expect_success 'no shallow lines after receiving ACK ready' ' ( cd shallow && + test_tick && for i in $(test_seq 15) do git checkout --orphan unrelated$i && diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index 1a3a2b6c1a..ac71418a1b 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -171,5 +171,30 @@ test_expect_success 'did not use upload-pack service' ' test_cmp exp act ' +test_expect_success 'git client shows text/plain errors' ' + test_must_fail git clone "$HTTPD_URL/error/text" 2>stderr && + grep "this is the error message" stderr +' + +test_expect_success 'git client does not show html errors' ' + test_must_fail git clone "$HTTPD_URL/error/html" 2>stderr && + ! grep "this is the error message" stderr +' + +test_expect_success 'git client shows text/plain with a charset' ' + test_must_fail git clone "$HTTPD_URL/error/charset" 2>stderr && + grep "this is the error message" stderr +' + +test_expect_success 'http error messages are reencoded' ' + test_must_fail git clone "$HTTPD_URL/error/utf16" 2>stderr && + grep "this is the error message" stderr +' + +test_expect_success 'reencoding is robust to whitespace oddities' ' + test_must_fail git clone "$HTTPD_URL/error/odd-spacing" 2>stderr && + grep "this is the error message" stderr +' + stop_httpd test_done diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index e07eaf35f1..6cbc12d9a7 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -213,8 +213,6 @@ test_expect_success 'cookies stored in http.cookiefile when http.savecookies set test_cmp expect_cookies.txt cookies_tail.txt ' -test -n "$GIT_TEST_LONG" && test_set_prereq EXPENSIVE - test_expect_success EXPENSIVE 'create 50,000 tags in the repo' ' ( cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && @@ -240,8 +238,7 @@ test_expect_success EXPENSIVE 'create 50,000 tags in the repo' ' ' test_expect_success EXPENSIVE 'clone the 50,000 tag repo to check OS command line overflow' ' - git clone $HTTPD_URL/smart/repo.git too-many-refs 2>err && - test_line_count = 0 err && + git clone $HTTPD_URL/smart/repo.git too-many-refs && ( cd too-many-refs && test $(git for-each-ref refs/tags | wc -l) = 50000 diff --git a/t/t5572-pull-submodule.sh b/t/t5572-pull-submodule.sh new file mode 100755 index 0000000000..accfa5cc0c --- /dev/null +++ b/t/t5572-pull-submodule.sh @@ -0,0 +1,45 @@ +#!/bin/sh + +test_description='pull can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +reset_branch_to_HEAD () { + git branch -D "$1" && + git checkout -b "$1" HEAD && + git branch --set-upstream-to="origin/$1" "$1" +} + +git_pull () { + reset_branch_to_HEAD "$1" && + git pull +} + +# pulls without conflicts +test_submodule_switch "git_pull" + +git_pull_ff () { + reset_branch_to_HEAD "$1" && + git pull --ff +} + +test_submodule_switch "git_pull_ff" + +git_pull_ff_only () { + reset_branch_to_HEAD "$1" && + git pull --ff-only +} + +test_submodule_switch "git_pull_ff_only" + +git_pull_noff () { + reset_branch_to_HEAD "$1" && + git pull --no-ff +} + +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 +test_submodule_switch "git_pull_noff" + +test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 5e67035be8..e4f10c0f68 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -318,7 +318,7 @@ test_expect_success 'clone myhost:src uses ssh' ' expect_ssh myhost src ' -test_expect_success NOT_MINGW,NOT_CYGWIN 'clone local path foo:bar' ' +test_expect_success !MINGW,!CYGWIN 'clone local path foo:bar' ' cp -R src "foo:bar" && git clone "foo:bar" foobar && expect_ssh none @@ -339,7 +339,7 @@ test_clone_url () { expect_ssh "$2" "$3" } -test_expect_success NOT_MINGW 'clone c:temp is ssl' ' +test_expect_success !MINGW 'clone c:temp is ssl' ' test_clone_url c:temp c temp ' diff --git a/t/t5704-bundle.sh b/t/t5704-bundle.sh index a45c31692e..348d9b3bc7 100755 --- a/t/t5704-bundle.sh +++ b/t/t5704-bundle.sh @@ -14,7 +14,10 @@ test_expect_success 'setup' ' git tag -d third ' -test_expect_success 'tags can be excluded by rev-list options' ' +test_expect_success 'annotated tags can be excluded by rev-list options' ' + git bundle create bundle --all --since=7.Apr.2005.15:14:00.-0700 && + git ls-remote bundle > output && + grep tag output && git bundle create bundle --all --since=7.Apr.2005.15:16:00.-0700 && git ls-remote bundle > output && ! grep tag output diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh index a00a660763..2419407546 100755 --- a/t/t5801-remote-helpers.sh +++ b/t/t5801-remote-helpers.sh @@ -87,13 +87,29 @@ test_expect_success 'push new branch by name' ' compare_refs local HEAD server refs/heads/new-name ' -test_expect_failure 'push new branch with old:new refspec' ' +test_expect_success 'push new branch with old:new refspec' ' (cd local && git push origin new-name:new-refspec ) && compare_refs local HEAD server refs/heads/new-refspec ' +test_expect_success 'push new branch with HEAD:new refspec' ' + (cd local && + git checkout new-name + git push origin HEAD:new-refspec-2 + ) && + compare_refs local HEAD server refs/heads/new-refspec-2 +' + +test_expect_success 'push delete branch' ' + (cd local && + git push origin :new-name + ) && + test_must_fail git --git-dir="server/.git" \ + rev-parse --verify refs/heads/new-name +' + test_expect_success 'forced push' ' (cd local && git checkout -b force-test && diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index 88ed3191e8..a02a45afd2 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -35,13 +35,13 @@ test_expect_success 'setup' ' : >foo && git add foo && git config i18n.commitEncoding $test_encoding && - git commit -m "$added_iso88591" && + echo "$added_iso88591" | git commit -F - && head1=$(git rev-parse --verify HEAD) && head1_short=$(git rev-parse --verify --short $head1) && tree1=$(git rev-parse --verify HEAD:) && tree1_short=$(git rev-parse --verify --short $tree1) && echo "$changed" > foo && - git commit -a -m "$changed_iso88591" && + echo "$changed_iso88591" | git commit -a -F - && head2=$(git rev-parse --verify HEAD) && head2_short=$(git rev-parse --verify --short $head2) && tree2=$(git rev-parse --verify HEAD:) && diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index 432f086c06..3758961765 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -77,12 +77,29 @@ test_expect_success "merge without conflict (--quiet)" \ "git merge-file --quiet test.txt orig.txt new2.txt" cp new1.txt test2.txt -test_expect_success "merge without conflict (missing LF at EOF)" \ - "git merge-file test2.txt orig.txt new2.txt" +test_expect_failure "merge without conflict (missing LF at EOF)" \ + "git merge-file test2.txt orig.txt new4.txt" -test_expect_success "merge result added missing LF" \ +test_expect_failure "merge result added missing LF" \ "test_cmp test.txt test2.txt" +cp new4.txt test3.txt +test_expect_success "merge without conflict (missing LF at EOF, away from change in the other file)" \ + "git merge-file --quiet test3.txt new2.txt new3.txt" + +cat > expect.txt << EOF +DOMINUS regit me, +et nihil mihi deerit. +In loco pascuae ibi me collocavit, +super aquam refectionis educavit me; +animam meam convertit, +deduxit me super semitas jusitiae, +EOF +printf "propter nomen suum." >> expect.txt + +test_expect_success "merge does not add LF away of change" \ + "test_cmp test3.txt expect.txt" + cp test.txt backup.txt test_expect_success "merge with conflicts" \ "test_must_fail git merge-file test.txt orig.txt new3.txt" @@ -107,6 +124,55 @@ EOF test_expect_success "expected conflict markers" "test_cmp test.txt expect.txt" cp backup.txt test.txt + +cat > expect.txt << EOF +Dominus regit me, et nihil mihi deerit. +In loco pascuae ibi me collocavit, +super aquam refectionis educavit me; +animam meam convertit, +deduxit me super semitas jusitiae, +propter nomen suum. +Nam et si ambulavero in medio umbrae mortis, +non timebo mala, quoniam tu mecum es: +virga tua et baculus tuus ipsa me consolata sunt. +EOF +test_expect_success "merge conflicting with --ours" \ + "git merge-file --ours test.txt orig.txt new3.txt && test_cmp test.txt expect.txt" +cp backup.txt test.txt + +cat > expect.txt << EOF +DOMINUS regit me, +et nihil mihi deerit. +In loco pascuae ibi me collocavit, +super aquam refectionis educavit me; +animam meam convertit, +deduxit me super semitas jusitiae, +propter nomen suum. +Nam et si ambulavero in medio umbrae mortis, +non timebo mala, quoniam tu mecum es: +virga tua et baculus tuus ipsa me consolata sunt. +EOF +test_expect_success "merge conflicting with --theirs" \ + "git merge-file --theirs test.txt orig.txt new3.txt && test_cmp test.txt expect.txt" +cp backup.txt test.txt + +cat > expect.txt << EOF +Dominus regit me, et nihil mihi deerit. +DOMINUS regit me, +et nihil mihi deerit. +In loco pascuae ibi me collocavit, +super aquam refectionis educavit me; +animam meam convertit, +deduxit me super semitas jusitiae, +propter nomen suum. +Nam et si ambulavero in medio umbrae mortis, +non timebo mala, quoniam tu mecum es: +virga tua et baculus tuus ipsa me consolata sunt. +EOF +test_expect_success "merge conflicting with --union" \ + "git merge-file --union test.txt orig.txt new3.txt && test_cmp test.txt expect.txt" +cp backup.txt test.txt + test_expect_success "merge with conflicts, using -L" \ "test_must_fail git merge-file -L 1 -L 2 test.txt orig.txt new3.txt" @@ -260,4 +326,23 @@ test_expect_success 'marker size' ' test_cmp expect actual ' +printf "line1\nline2\nline3" >nolf-orig.txt +printf "line1\nline2\nline3x" >nolf-diff1.txt +printf "line1\nline2\nline3y" >nolf-diff2.txt + +test_expect_success 'conflict at EOF without LF resolved by --ours' \ + 'git merge-file -p --ours nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3x" >expect.txt && + test_cmp expect.txt output.txt' + +test_expect_success 'conflict at EOF without LF resolved by --theirs' \ + 'git merge-file -p --theirs nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3y" >expect.txt && + test_cmp expect.txt output.txt' + +test_expect_success 'conflict at EOF without LF resolved by --union' \ + 'git merge-file -p --union nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3x\nline3y" >expect.txt && + test_cmp expect.txt output.txt' + test_done diff --git a/t/t6041-bisect-submodule.sh b/t/t6041-bisect-submodule.sh new file mode 100755 index 0000000000..c6b7aa6977 --- /dev/null +++ b/t/t6041-bisect-submodule.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +test_description='bisect can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +git_bisect () { + git status -su >expect && + ls -1pR * >>expect && + tar czf "$TRASH_DIRECTORY/tmp.tgz" * && + GOOD=$(git rev-parse --verify HEAD) && + git checkout "$1" && + echo "foo" >bar && + git add bar && + git commit -m "bisect bad" && + BAD=$(git rev-parse --verify HEAD) && + git reset --hard HEAD^^ && + git submodule update && + git bisect start && + git bisect good $GOOD && + rm -rf * && + tar xzf "$TRASH_DIRECTORY/tmp.tgz" && + git status -su >actual && + ls -1pR * >>actual && + test_cmp expect actual && + git bisect bad $BAD +} + +test_submodule_switch "git_bisect" + +test_done diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index 719a11673b..4d5a25eedf 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -7,8 +7,9 @@ test_description='Tests replace refs functionality' exec </dev/null . ./test-lib.sh +. "$TEST_DIRECTORY/lib-gpg.sh" -add_and_commit_file() +add_and_commit_file () { _file="$1" _msg="$2" @@ -18,6 +19,38 @@ add_and_commit_file() git commit --quiet -m "$_file: $_msg" } +commit_buffer_contains_parents () +{ + git cat-file commit "$1" >payload && + sed -n -e '/^$/q' -e '/^parent /p' <payload >actual && + shift && + for _parent + do + echo "parent $_parent" + done >expected && + test_cmp expected actual +} + +commit_peeling_shows_parents () +{ + _parent_number=1 + _commit="$1" + shift && + for _parent + do + _found=$(git rev-parse --verify $_commit^$_parent_number) || return 1 + test "$_found" = "$_parent" || return 1 + _parent_number=$(( $_parent_number + 1 )) + done && + test_must_fail git rev-parse --verify $_commit^$_parent_number +} + +commit_has_parents () +{ + commit_buffer_contains_parents "$@" && + commit_peeling_shows_parents "$@" +} + HASH1= HASH2= HASH3= @@ -27,36 +60,36 @@ HASH6= HASH7= test_expect_success 'set up buggy branch' ' - echo "line 1" >> hello && - echo "line 2" >> hello && - echo "line 3" >> hello && - echo "line 4" >> hello && + echo "line 1" >>hello && + echo "line 2" >>hello && + echo "line 3" >>hello && + echo "line 4" >>hello && add_and_commit_file hello "4 lines" && HASH1=$(git rev-parse --verify HEAD) && - echo "line BUG" >> hello && - echo "line 6" >> hello && - echo "line 7" >> hello && - echo "line 8" >> hello && + echo "line BUG" >>hello && + echo "line 6" >>hello && + echo "line 7" >>hello && + echo "line 8" >>hello && add_and_commit_file hello "4 more lines with a BUG" && HASH2=$(git rev-parse --verify HEAD) && - echo "line 9" >> hello && - echo "line 10" >> hello && + echo "line 9" >>hello && + echo "line 10" >>hello && add_and_commit_file hello "2 more lines" && HASH3=$(git rev-parse --verify HEAD) && - echo "line 11" >> hello && + echo "line 11" >>hello && add_and_commit_file hello "1 more line" && HASH4=$(git rev-parse --verify HEAD) && - sed -e "s/BUG/5/" hello > hello.new && + sed -e "s/BUG/5/" hello >hello.new && mv hello.new hello && add_and_commit_file hello "BUG fixed" && HASH5=$(git rev-parse --verify HEAD) && - echo "line 12" >> hello && - echo "line 13" >> hello && + echo "line 12" >>hello && + echo "line 13" >>hello && add_and_commit_file hello "2 more lines" && HASH6=$(git rev-parse --verify HEAD) && - echo "line 14" >> hello && - echo "line 15" >> hello && - echo "line 16" >> hello && + echo "line 14" >>hello && + echo "line 15" >>hello && + echo "line 16" >>hello && add_and_commit_file hello "again 3 more lines" && HASH7=$(git rev-parse --verify HEAD) ' @@ -95,7 +128,7 @@ test_expect_success 'tag replaced commit' ' ' test_expect_success '"git fsck" works' ' - git fsck master > fsck_master.out && + git fsck master >fsck_master.out && grep "dangling commit $R" fsck_master.out && grep "dangling tag $(cat .git/refs/tags/mytag)" fsck_master.out && test -z "$(git fsck)" @@ -217,14 +250,14 @@ test_expect_success 'fetch branch with replacement' ' ( cd clone_dir && git fetch origin refs/heads/tofetch:refs/heads/parallel3 && - git log --pretty=oneline parallel3 > output.txt && + git log --pretty=oneline parallel3 >output.txt && ! grep $PARA3 output.txt && - git show $PARA3 > para3.txt && + git show $PARA3 >para3.txt && grep "A U Thor" para3.txt && git fetch origin "refs/replace/*:refs/replace/*" && - git log --pretty=oneline parallel3 > output.txt && + git log --pretty=oneline parallel3 >output.txt && grep $PARA3 output.txt && - git show $PARA3 > para3.txt && + git show $PARA3 >para3.txt && grep "O Thor" para3.txt ) ' @@ -302,7 +335,7 @@ test_expect_success 'test --format medium' ' echo "$PARA3 -> $S" && echo "$MYTAG -> $HASH1" } | sort >expected && - git replace -l --format medium | sort > actual && + git replace -l --format medium | sort >actual && test_cmp expected actual ' @@ -314,14 +347,97 @@ test_expect_success 'test --format long' ' echo "$PARA3 (commit) -> $S (commit)" && echo "$MYTAG (tag) -> $HASH1 (commit)" } | sort >expected && - git replace --format=long | sort > actual && + git replace --format=long | sort >actual && test_cmp expected actual ' +test_expect_success 'setup a fake editor' ' + write_script fakeeditor <<-\EOF + sed -e "s/A U Thor/A fake Thor/" "$1" >"$1.new" + mv "$1.new" "$1" + EOF +' + +test_expect_success '--edit with and without already replaced object' ' + test_must_fail env GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && + GIT_EDITOR=./fakeeditor git replace --force --edit "$PARA3" && + git replace -l | grep "$PARA3" && + git cat-file commit "$PARA3" | grep "A fake Thor" && + git replace -d "$PARA3" && + GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && + git replace -l | grep "$PARA3" && + git cat-file commit "$PARA3" | grep "A fake Thor" +' + +test_expect_success '--edit and change nothing or command failed' ' + git replace -d "$PARA3" && + test_must_fail env GIT_EDITOR=true git replace --edit "$PARA3" && + test_must_fail env GIT_EDITOR="./fakeeditor;false" git replace --edit "$PARA3" && + GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && + git replace -l | grep "$PARA3" && + git cat-file commit "$PARA3" | grep "A fake Thor" +' + test_expect_success 'replace ref cleanup' ' test -n "$(git replace)" && git replace -d $(git replace) && test -z "$(git replace)" ' +test_expect_success '--graft with and without already replaced object' ' + test $(git log --oneline | wc -l) = 7 && + git replace --graft $HASH5 && + test $(git log --oneline | wc -l) = 3 && + commit_has_parents $HASH5 && + test_must_fail git replace --graft $HASH5 $HASH4 $HASH3 && + git replace --force -g $HASH5 $HASH4 $HASH3 && + commit_has_parents $HASH5 $HASH4 $HASH3 && + git replace -d $HASH5 +' + +test_expect_success GPG 'set up a signed commit' ' + echo "line 17" >>hello && + echo "line 18" >>hello && + git add hello && + test_tick && + git commit --quiet -S -m "hello: 2 more lines in a signed commit" && + HASH8=$(git rev-parse --verify HEAD) && + git verify-commit $HASH8 +' + +test_expect_success GPG '--graft with a signed commit' ' + git cat-file commit $HASH8 >orig && + git replace --graft $HASH8 && + git cat-file commit $HASH8 >repl && + commit_has_parents $HASH8 && + test_must_fail git verify-commit $HASH8 && + sed -n -e "/^tree /p" -e "/^author /p" -e "/^committer /p" orig >expected && + echo >>expected && + sed -e "/^$/q" repl >actual && + test_cmp expected actual && + git replace -d $HASH8 +' + +test_expect_success GPG 'set up a merge commit with a mergetag' ' + git reset --hard HEAD && + git checkout -b test_branch HEAD~2 && + echo "line 1 from test branch" >>hello && + echo "line 2 from test branch" >>hello && + git add hello && + test_tick && + git commit -m "hello: 2 more lines from a test branch" && + HASH9=$(git rev-parse --verify HEAD) && + git tag -s -m "tag for testing with a mergetag" test_tag HEAD && + git checkout master && + git merge -s ours test_tag && + HASH10=$(git rev-parse --verify HEAD) && + git cat-file commit $HASH10 | grep "^mergetag object" +' + +test_expect_success GPG '--graft on a commit with a mergetag' ' + test_must_fail git replace --graft $HASH10 $HASH8^1 && + git replace --graft $HASH10 $HASH8^1 $HASH9 && + git replace -d $HASH10 +' + test_done diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 143a8ea605..0366653088 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1385,41 +1385,103 @@ test_expect_success 'lexical sort' ' git tag foo1.6 && git tag foo1.10 && git tag -l --sort=refname "foo*" >actual && - cat >expect <<EOF && -foo1.10 -foo1.3 -foo1.6 -EOF + cat >expect <<-\EOF && + foo1.10 + foo1.3 + foo1.6 + EOF test_cmp expect actual ' test_expect_success 'version sort' ' git tag -l --sort=version:refname "foo*" >actual && - cat >expect <<EOF && -foo1.3 -foo1.6 -foo1.10 -EOF + cat >expect <<-\EOF && + foo1.3 + foo1.6 + foo1.10 + EOF test_cmp expect actual ' test_expect_success 'reverse version sort' ' git tag -l --sort=-version:refname "foo*" >actual && - cat >expect <<EOF && -foo1.10 -foo1.6 -foo1.3 -EOF + cat >expect <<-\EOF && + foo1.10 + foo1.6 + foo1.3 + EOF test_cmp expect actual ' test_expect_success 'reverse lexical sort' ' git tag -l --sort=-refname "foo*" >actual && - cat >expect <<EOF && -foo1.6 -foo1.3 -foo1.10 -EOF + cat >expect <<-\EOF && + foo1.6 + foo1.3 + foo1.10 + EOF + test_cmp expect actual +' + +test_expect_success 'configured lexical sort' ' + git config tag.sort "v:refname" && + git tag -l "foo*" >actual && + cat >expect <<-\EOF && + foo1.3 + foo1.6 + foo1.10 + EOF + test_cmp expect actual +' + +test_expect_success 'option override configured sort' ' + git tag -l --sort=-refname "foo*" >actual && + cat >expect <<-\EOF && + foo1.6 + foo1.3 + foo1.10 + EOF + test_cmp expect actual +' + +test_expect_success 'invalid sort parameter on command line' ' + test_must_fail git tag -l --sort=notvalid "foo*" >actual +' + +test_expect_success 'invalid sort parameter in configuratoin' ' + git config tag.sort "v:notvalid" && + git tag -l "foo*" >actual && + cat >expect <<-\EOF && + foo1.10 + foo1.3 + foo1.6 + EOF + test_cmp expect actual +' + +run_with_limited_stack () { + (ulimit -s 64 && "$@") +} + +test_lazy_prereq ULIMIT 'run_with_limited_stack true' + +# we require ulimit, this excludes Windows +test_expect_success ULIMIT '--contains works in a deep repo' ' + >expect && + i=1 && + while test $i -lt 4000 + do + echo "commit refs/heads/master +committer A U Thor <author@example.com> $((1000000000 + $i * 100)) +0200 +data <<EOF +commit #$i +EOF" + test $i = 1 && echo "from refs/heads/master^0" + i=$(($i + 1)) + done | git fast-import && + git checkout master && + git tag far-far-away HEAD^ && + run_with_limited_stack git tag --contains HEAD >actual && test_cmp expect actual ' diff --git a/t/t7102-reset.sh b/t/t7102-reset.sh index ee703bed64..98bcfe21aa 100755 --- a/t/t7102-reset.sh +++ b/t/t7102-reset.sh @@ -44,7 +44,9 @@ test_expect_success 'creating initial files and commits' ' echo "1st line 2nd file" >secondfile && echo "2nd line 2nd file" >>secondfile && - git -c "i18n.commitEncoding=$test_encoding" commit -a -m "$(commit_msg $test_encoding)" && + # "git commit -m" would break MinGW, as Windows refuse to pass + # $test_encoding encoded parameter to git. + commit_msg $test_encoding | git -c "i18n.commitEncoding=$test_encoding" commit -a -F - && head5=$(git rev-parse --verify HEAD) ' # git log --pretty=oneline # to see those SHA1 involved @@ -334,7 +336,9 @@ test_expect_success 'redoing the last two commits should succeed' ' echo "1st line 2nd file" >secondfile && echo "2nd line 2nd file" >>secondfile && - git -c "i18n.commitEncoding=$test_encoding" commit -a -m "$(commit_msg $test_encoding)" && + # "git commit -m" would break MinGW, as Windows refuse to pass + # $test_encoding encoded parameter to git. + commit_msg $test_encoding | git -c "i18n.commitEncoding=$test_encoding" commit -a -F - && check_changes $head5 ' diff --git a/t/t7112-reset-submodule.sh b/t/t7112-reset-submodule.sh new file mode 100755 index 0000000000..2eda6adeb1 --- /dev/null +++ b/t/t7112-reset-submodule.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +test_description='reset can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +test_submodule_switch "git reset --keep" + +test_submodule_switch "git reset --merge" + +test_submodule_forced_switch "git reset --hard" + +test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index d58b097ff3..63e04277f9 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -346,8 +346,21 @@ test_expect_success 'amend commit to fix date' ' ' -test_expect_success 'commit complains about bogus date' ' - test_must_fail git commit --amend --date=10.11.2010 +test_expect_success 'commit mentions forced date in output' ' + git commit --amend --date=2010-01-02T03:04:05 >output && + grep "Date: *Sat Jan 2 03:04:05 2010" output +' + +test_expect_success 'commit complains about completely bogus dates' ' + test_must_fail git commit --amend --date=seventeen +' + +test_expect_success 'commit --date allows approxidate' ' + git commit --amend \ + --date="midnight the 12th of october, anno domini 1979" && + echo "Fri Oct 12 00:00:00 1979 +0000" >expect && + git log -1 --format=%ad >actual && + test_cmp expect actual ' test_expect_success 'sign off (1)' ' diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 9a3f3a1b41..051489ea33 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -344,6 +344,13 @@ test_expect_success 'message shows author when it is not equal to committer' ' .git/COMMIT_EDITMSG ' +test_expect_success 'message shows date when it is explicitly set' ' + git commit --allow-empty -e -m foo --date="2010-01-02T03:04:05" && + test_i18ngrep \ + "^# Date: *Sat Jan 2 03:04:05 2010 +0000" \ + .git/COMMIT_EDITMSG +' + test_expect_success AUTOIDENT 'message shows committer when it is automatic' ' echo >>negative && @@ -563,4 +570,30 @@ test_expect_success 'commit --status with custom comment character' ' test_i18ngrep "^; Changes to be committed:" .git/COMMIT_EDITMSG ' +test_expect_success 'switch core.commentchar' ' + test_commit "#foo" foo && + GIT_EDITOR=.git/FAKE_EDITOR git -c core.commentChar=auto commit --amend && + test_i18ngrep "^; Changes to be committed:" .git/COMMIT_EDITMSG +' + +test_expect_success 'switch core.commentchar but out of options' ' + cat >text <<\EOF && +# 1 +; 2 +@ 3 +! 4 +$ 5 +% 6 +^ 7 +& 8 +| 9 +: 10 +EOF + git commit --amend -F text && + ( + test_set_editor .git/FAKE_EDITOR && + test_must_fail git -c core.commentChar=auto commit --amend + ) +' + test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index d48006960e..8ed5788808 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -1350,8 +1350,7 @@ test_expect_success "status (core.commentchar with submodule summary)" ' test_expect_success "status (core.commentchar with two chars with submodule summary)" ' test_config core.commentchar ";;" && - git -c status.displayCommentPrefix=true status >output && - test_i18ncmp expect output + test_must_fail git -c status.displayCommentPrefix=true status ' test_expect_success "--ignore-submodules=all suppresses submodule summary" ' diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index e97477a3b9..474dab381a 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -48,10 +48,11 @@ test_expect_success GPG 'create signed commits' ' git tag eighth-signed-alt ' -test_expect_success GPG 'show signatures' ' +test_expect_success GPG 'verify and show signatures' ' ( for commit in initial second merge fourth-signed fifth-signed sixth-signed seventh-signed do + git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && grep "Good signature from" actual && ! grep "BAD signature from" actual && @@ -61,6 +62,7 @@ test_expect_success GPG 'show signatures' ' ( for commit in merge^2 fourth-unsigned sixth-unsigned seventh-unsigned do + test_must_fail git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && ! grep "Good signature from" actual && ! grep "BAD signature from" actual && @@ -79,11 +81,25 @@ test_expect_success GPG 'show signatures' ' ) ' +test_expect_success GPG 'show signed commit with signature' ' + git show -s initial >commit && + git show -s --show-signature initial >show && + git verify-commit -v initial >verify.1 2>verify.2 && + git cat-file commit initial >cat && + grep -v "gpg: " show >show.commit && + grep "gpg: " show >show.gpg && + grep -v "^ " cat | grep -v "^gpgsig " >cat.commit && + test_cmp show.commit commit && + test_cmp show.gpg verify.2 && + test_cmp cat.commit verify.1 +' + test_expect_success GPG 'detect fudged signature' ' git cat-file commit seventh-signed >raw && sed -e "s/seventh/7th forged/" raw >forged1 && git hash-object -w -t commit forged1 >forged1.commit && + ! git verify-commit $(cat forged1.commit) && git show --pretty=short --show-signature $(cat forged1.commit) >actual1 && grep "BAD signature from" actual1 && ! grep "Good signature from" actual1 @@ -94,6 +110,7 @@ test_expect_success GPG 'detect fudged signature with NUL' ' cat raw >forged2 && echo Qwik | tr "Q" "\000" >>forged2 && git hash-object -w -t commit forged2 >forged2.commit && + ! git verify-commit $(cat forged2.commit) && git show --pretty=short --show-signature $(cat forged2.commit) >actual2 && grep "BAD signature from" actual2 && ! grep "Good signature from" actual2 @@ -102,6 +119,7 @@ test_expect_success GPG 'detect fudged signature with NUL' ' test_expect_success GPG 'amending already signed commit' ' git checkout fourth-signed^0 && git commit --amend -S --no-edit && + git verify-commit HEAD && git show -s --show-signature HEAD >actual && grep "Good signature from" actual && ! grep "BAD signature from" actual diff --git a/t/t7515-status-symlinks.sh b/t/t7515-status-symlinks.sh new file mode 100755 index 0000000000..9f989be01b --- /dev/null +++ b/t/t7515-status-symlinks.sh @@ -0,0 +1,43 @@ +#!/bin/sh + +test_description='git status and symlinks' + +. ./test-lib.sh + +test_expect_success 'setup' ' + echo .gitignore >.gitignore && + echo actual >>.gitignore && + echo expect >>.gitignore && + mkdir dir && + echo x >dir/file1 && + echo y >dir/file2 && + git add dir && + git commit -m initial && + git tag initial +' + +test_expect_success SYMLINKS 'symlink to a directory' ' + test_when_finished "rm symlink" && + ln -s dir symlink && + echo "?? symlink" >expect && + git status --porcelain >actual && + test_cmp expect actual +' + +test_expect_success SYMLINKS 'symlink replacing a directory' ' + test_when_finished "rm -rf copy && git reset --hard initial" && + mkdir copy && + cp dir/file1 copy/file1 && + echo "changed in copy" >copy/file2 && + git add copy && + git commit -m second && + rm -rf copy && + ln -s dir copy && + echo " D copy/file1" >expect && + echo " D copy/file2" >>expect && + echo "?? copy" >>expect && + git status --porcelain >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t7613-merge-submodule.sh b/t/t7613-merge-submodule.sh new file mode 100755 index 0000000000..d1e9fcc781 --- /dev/null +++ b/t/t7613-merge-submodule.sh @@ -0,0 +1,19 @@ +#!/bin/sh + +test_description='merge can handle submodules' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-submodule-update.sh + +# merges without conflicts +test_submodule_switch "git merge" + +test_submodule_switch "git merge --ff" + +test_submodule_switch "git merge --ff-only" + +KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 +KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 +test_submodule_switch "git merge --no-ff" + +test_done diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 61e6ed37aa..021c5479bd 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -21,7 +21,7 @@ test_expect_success 'objects in packs marked .keep are not repacked' ' objsha1=$(git verify-pack -v pack-$packsha1.idx | head -n 1 | sed -e "s/^\([0-9a-f]\{40\}\).*/\1/") && mv pack-* .git/objects/pack/ && - git repack --no-pack-kept-objects -A -d -l && + git repack -A -d -l && git prune-packed && for p in .git/objects/pack/*.idx; do idx=$(basename $p) @@ -53,7 +53,7 @@ test_expect_success 'writing bitmaps via command-line can duplicate .keep object test_expect_success 'writing bitmaps via config can duplicate .keep objects' ' # build on $objsha1, $packsha1, and .keep state from previous - git -c pack.writebitmaps=true repack -Adl && + git -c repack.writebitmaps=true repack -Adl && test_when_finished "found_duplicate_object=" && for p in .git/objects/pack/*.idx; do idx=$(basename $p) diff --git a/t/t7702-repack-cyclic-alternate.sh b/t/t7702-repack-cyclic-alternate.sh new file mode 100755 index 0000000000..93b74867ac --- /dev/null +++ b/t/t7702-repack-cyclic-alternate.sh @@ -0,0 +1,24 @@ +#!/bin/sh +# +# Copyright (c) 2014 Ephrim Khong +# + +test_description='repack involving cyclic alternate' +. ./test-lib.sh + +test_expect_success setup ' + GIT_OBJECT_DIRECTORY=.git//../.git/objects && + export GIT_OBJECT_DIRECTORY && + touch a && + git add a && + git commit -m 1 && + git repack -adl && + echo "$(pwd)"/.git/objects/../objects >.git/objects/info/alternates +' + +test_expect_success 're-packing repository with itsself as alternate' ' + git repack -adl && + git fsck +' + +test_done diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 5a193c500d..dc30a514bf 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -58,7 +58,7 @@ test_expect_success PERL 'custom tool commands override built-ins' ' test_expect_success PERL 'difftool ignores bad --tool values' ' : >expect && - test_expect_code 1 \ + test_must_fail \ git difftool --no-prompt --tool=bad-tool branch >actual && test_cmp expect actual ' diff --git a/t/t8005-blame-i18n.sh b/t/t8005-blame-i18n.sh index cb390559f9..847d098c09 100755 --- a/t/t8005-blame-i18n.sh +++ b/t/t8005-blame-i18n.sh @@ -33,7 +33,7 @@ author $SJIS_NAME summary $SJIS_MSG EOF -test_expect_success \ +test_expect_success !MINGW \ 'blame respects i18n.commitencoding' ' git blame --incremental file | \ egrep "^(author|summary) " > actual && @@ -49,7 +49,7 @@ author $EUC_JAPAN_NAME summary $EUC_JAPAN_MSG EOF -test_expect_success \ +test_expect_success !MINGW \ 'blame respects i18n.logoutputencoding' ' git config i18n.logoutputencoding eucJP && git blame --incremental file | \ @@ -66,7 +66,7 @@ author $UTF8_NAME summary $UTF8_MSG EOF -test_expect_success \ +test_expect_success !MINGW \ 'blame respects --encoding=UTF-8' ' git blame --incremental --encoding=UTF-8 file | \ egrep "^(author|summary) " > actual && @@ -82,7 +82,7 @@ author $UTF8_NAME summary $UTF8_MSG EOF -test_expect_success \ +test_expect_success !MINGW \ 'blame respects --encoding=none' ' git blame --incremental --encoding=none file | \ egrep "^(author|summary) " > actual && diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 1ecdacb6fd..19a3ced600 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -1334,6 +1334,51 @@ test_expect_success $PREREQ '--force sends cover letter template anyway' ' test -n "$(ls msgtxt*)" ' +test_cover_addresses () { + header="$1" + shift + clean_fake_sendmail && + rm -fr outdir && + git format-patch --cover-letter -2 -o outdir && + cover=`echo outdir/0000-*.patch` && + mv $cover cover-to-edit.patch && + perl -pe "s/^From:/$header: extra\@address.com\nFrom:/" cover-to-edit.patch >"$cover" && + git send-email \ + --force \ + --from="Example <nobody@example.com>" \ + --no-to --no-cc \ + "$@" \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + outdir/0002-*.patch \ + 2>errors >out && + grep "^$header: extra@address.com" msgtxt1 >to1 && + grep "^$header: extra@address.com" msgtxt2 >to2 && + grep "^$header: extra@address.com" msgtxt3 >to3 && + test_line_count = 1 to1 && + test_line_count = 1 to2 && + test_line_count = 1 to3 +} + +test_expect_success $PREREQ 'to-cover adds To to all mail' ' + test_cover_addresses "To" --to-cover +' + +test_expect_success $PREREQ 'cc-cover adds Cc to all mail' ' + test_cover_addresses "Cc" --cc-cover +' + +test_expect_success $PREREQ 'tocover adds To to all mail' ' + test_config sendemail.tocover true && + test_cover_addresses "To" +' + +test_expect_success $PREREQ 'cccover adds Cc to all mail' ' + test_config sendemail.cccover true && + test_cover_addresses "Cc" +' + test_expect_success $PREREQ 'sendemail.aliasfiletype=mailrc' ' clean_fake_sendmail && echo "alias sbd somebody@example.org" >.mailrc && diff --git a/t/t9138-git-svn-authors-prog.sh b/t/t9138-git-svn-authors-prog.sh index 83cc5fc9d1..2937f4c265 100755 --- a/t/t9138-git-svn-authors-prog.sh +++ b/t/t9138-git-svn-authors-prog.sh @@ -7,40 +7,39 @@ test_description='git svn authors prog tests' . ./lib-git-svn.sh -cat > svn-authors-prog <<'EOF' -#!/usr/bin/perl -$_ = shift; -if (s/-sub$//) { - print "$_ <$_\@sub.example.com>\n"; -} -else { - print "$_ <$_\@example.com>\n"; -} +write_script svn-authors-prog "$PERL_PATH" <<-\EOF + $_ = shift; + if (s/-sub$//) { + print "$_ <$_\@sub.example.com>\n"; + } else { + print "$_ <$_\@example.com>\n"; + } EOF -chmod +x svn-authors-prog -cat > svn-authors <<'EOF' -ff = FFFFFFF FFFFFFF <fFf@other.example.com> -EOF +test_expect_success 'svn-authors setup' ' + cat >svn-authors <<-\EOF + ff = FFFFFFF FFFFFFF <fFf@other.example.com> + EOF +' test_expect_success 'setup svnrepo' ' for i in aa bb cc-sub dd-sub ee-foo ff do svn mkdir -m $i --username $i "$svnrepo"/$i done - ' +' test_expect_success 'import authors with prog and file' ' git svn clone --authors-prog=./svn-authors-prog \ --authors-file=svn-authors "$svnrepo" x - ' +' test_expect_success 'imported 6 revisions successfully' ' ( cd x test "`git rev-list refs/remotes/git-svn | wc -l`" -eq 6 ) - ' +' test_expect_success 'authors-prog ran correctly' ' ( @@ -56,7 +55,7 @@ test_expect_success 'authors-prog ran correctly' ' git rev-list -1 --pretty=raw refs/remotes/git-svn~5 | \ grep "^author aa <aa@example\.com> " ) - ' +' test_expect_success 'authors-file overrode authors-prog' ' ( @@ -64,7 +63,7 @@ test_expect_success 'authors-file overrode authors-prog' ' git rev-list -1 --pretty=raw refs/remotes/git-svn | \ grep "^author FFFFFFF FFFFFFF <fFf@other\.example\.com> " ) - ' +' git --git-dir=x/.git config --unset svn.authorsfile git --git-dir=x/.git config --unset svn.authorsprog diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 27263dfb80..99f51614ad 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -2336,7 +2336,7 @@ test_expect_success 'R: cat-blob-fd must be a nonnegative integer' ' test_must_fail git fast-import --cat-blob-fd=-1 </dev/null ' -test_expect_success NOT_MINGW 'R: print old blob' ' +test_expect_success !MINGW 'R: print old blob' ' blob=$(echo "yes it can" | git hash-object -w --stdin) && cat >expect <<-EOF && ${blob} blob 11 @@ -2348,7 +2348,7 @@ test_expect_success NOT_MINGW 'R: print old blob' ' test_cmp expect actual ' -test_expect_success NOT_MINGW 'R: in-stream cat-blob-fd not respected' ' +test_expect_success !MINGW 'R: in-stream cat-blob-fd not respected' ' echo hello >greeting && blob=$(git hash-object -w greeting) && cat >expect <<-EOF && @@ -2369,7 +2369,7 @@ test_expect_success NOT_MINGW 'R: in-stream cat-blob-fd not respected' ' test_cmp expect actual.1 ' -test_expect_success NOT_MINGW 'R: print new blob' ' +test_expect_success !MINGW 'R: print new blob' ' blob=$(echo "yep yep yep" | git hash-object --stdin) && cat >expect <<-EOF && ${blob} blob 12 @@ -2387,7 +2387,7 @@ test_expect_success NOT_MINGW 'R: print new blob' ' test_cmp expect actual ' -test_expect_success NOT_MINGW 'R: print new blob by sha1' ' +test_expect_success !MINGW 'R: print new blob by sha1' ' blob=$(echo "a new blob named by sha1" | git hash-object --stdin) && cat >expect <<-EOF && ${blob} blob 25 @@ -2999,4 +2999,22 @@ test_expect_success 'T: ls root tree' ' test_cmp expect actual ' +test_expect_success 'T: delete branch' ' + git branch to-delete && + git fast-import <<-EOF && + reset refs/heads/to-delete + from 0000000000000000000000000000000000000000 + EOF + test_must_fail git rev-parse --verify refs/heads/to-delete +' + +test_expect_success 'T: empty reset doesnt delete branch' ' + git branch not-to-delete && + git fast-import <<-EOF && + reset refs/heads/not-to-delete + EOF + git show-ref && + git rev-parse --verify refs/heads/not-to-delete +' + test_done diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 2312dec8f0..66c8b0a371 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -504,4 +504,22 @@ test_expect_success 'refs are updated even if no commits need to be exported' ' test_cmp expected actual ' +test_expect_success 'use refspec' ' + git fast-export --refspec refs/heads/master:refs/heads/foobar master | \ + grep "^commit " | sort | uniq > actual && + echo "commit refs/heads/foobar" > expected && + test_cmp expected actual +' + +test_expect_success 'delete refspec' ' + git branch to-delete && + git fast-export --refspec :refs/heads/to-delete to-delete ^to-delete > actual && + cat > expected <<-EOF && + reset refs/heads/to-delete + from 0000000000000000000000000000000000000000 + + EOF + test_cmp expected actual +' + test_done diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 665607c9cb..5b562122a1 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -145,7 +145,7 @@ test_expect_success 'exit when p4 fails to produce marshaled output' ' test_expect_code 1 git p4 clone --dest="$git" //depot >errs 2>&1 ) && cat errs && - ! test_i18ngrep Traceback errs + test_i18ngrep ! Traceback errs ' # Hide a file from p4d, make sure we catch its complaint. This won't fail in diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 4caf36e006..1f74a88385 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -403,7 +403,8 @@ test_expect_success 'submit --prepare-p4-only' ' git commit -m "prep only add" && git p4 submit --prepare-p4-only >out && test_i18ngrep "prepared for submission" out && - test_i18ngrep "must be deleted" out + test_i18ngrep "must be deleted" out && + test_i18ngrep ! "everything below this line is just the diff" out ) && ( cd "$cli" && diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh index 23a827fa77..897b3c3034 100755 --- a/t/t9809-git-p4-client-view.sh +++ b/t/t9809-git-p4-client-view.sh @@ -365,7 +365,7 @@ test_expect_success 'wildcard files submit back to p4, client-spec case' ' ( cd "$git" && echo git-wild-hash >dir1/git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then echo git-wild-star >dir1/git-wild\*star fi && @@ -379,7 +379,7 @@ test_expect_success 'wildcard files submit back to p4, client-spec case' ' ( cd "$cli" && test_path_is_file dir1/git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test_path_is_file dir1/git-wild\*star fi && diff --git a/t/t9812-git-p4-wildcards.sh b/t/t9812-git-p4-wildcards.sh index c7472cbf54..0206771fbb 100755 --- a/t/t9812-git-p4-wildcards.sh +++ b/t/t9812-git-p4-wildcards.sh @@ -14,7 +14,7 @@ test_expect_success 'add p4 files with wildcards in the names' ' printf "file2\nhas\nsome\nrandom\ntext\n" >file2 && p4 add file2 && echo file-wild-hash >file-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then echo file-wild-star >file-wild\*star fi && @@ -31,7 +31,7 @@ test_expect_success 'wildcard files git p4 clone' ' ( cd "$git" && test -f file-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test -f file-wild\*star fi && @@ -46,7 +46,7 @@ test_expect_success 'wildcard files submit back to p4, add' ' ( cd "$git" && echo git-wild-hash >git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then echo git-wild-star >git-wild\*star fi && @@ -60,7 +60,7 @@ test_expect_success 'wildcard files submit back to p4, add' ' ( cd "$cli" && test_path_is_file git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test_path_is_file git-wild\*star fi && @@ -75,7 +75,7 @@ test_expect_success 'wildcard files submit back to p4, modify' ' ( cd "$git" && echo new-line >>git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then echo new-line >>git-wild\*star fi && @@ -89,7 +89,7 @@ test_expect_success 'wildcard files submit back to p4, modify' ' ( cd "$cli" && test_line_count = 2 git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test_line_count = 2 git-wild\*star fi && @@ -152,7 +152,7 @@ test_expect_success 'wildcard files submit back to p4, delete' ' ( cd "$cli" && test_path_is_missing git-wild#hash && - if test_have_prereq NOT_MINGW NOT_CYGWIN + if test_have_prereq !MINGW,!CYGWIN then test_path_is_missing git-wild\*star fi && diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh index be802e0e16..95f4421f71 100755 --- a/t/t9814-git-p4-rename.sh +++ b/t/t9814-git-p4-rename.sh @@ -177,7 +177,10 @@ test_expect_success 'detect copies' ' level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 -o "$src" = file11 && + case "$src" in + file10 | file11) : ;; # happy + *) false ;; # not + && git config git-p4.detectCopies $(($level + 2)) && git p4 submit && p4 filelog //depot/file12 && @@ -191,7 +194,10 @@ test_expect_success 'detect copies' ' level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 -o "$src" = file11 -o "$src" = file12 && + case "$src" in + file10 | file11 | file12) : ;; # happy + *) false ;; # not + && git config git-p4.detectCopies $(($level - 2)) && git p4 submit && p4 filelog //depot/file13 && diff --git a/t/t9815-git-p4-submit-fail.sh b/t/t9815-git-p4-submit-fail.sh index 1243d96092..4cff6a760f 100755 --- a/t/t9815-git-p4-submit-fail.sh +++ b/t/t9815-git-p4-submit-fail.sh @@ -417,7 +417,7 @@ test_expect_success 'cleanup chmod after submit cancel' ' ! p4 fstat -T action text && test_path_is_file text+x && ! p4 fstat -T action text+x && - if test_have_prereq NOT_CYGWIN + if test_have_prereq !CYGWIN then stat --format=%A text | egrep ^-r-- && stat --format=%A text+x | egrep ^-r-x diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 2d4beb5e50..f10a75290e 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -212,9 +212,18 @@ test_expect_success '__gitdir - non-existing $GIT_DIR' ' ) ' +function pwd_P_W () { + if test_have_prereq MINGW + then + pwd -W + else + pwd -P + fi +} + test_expect_success '__gitdir - gitfile in cwd' ' - echo "$(pwd -P)/otherrepo/.git" >expected && - echo "gitdir: $TRASH_DIRECTORY/otherrepo/.git" >subdir/.git && + echo "$(pwd_P_W)/otherrepo/.git" >expected && + echo "gitdir: $(pwd_P_W)/otherrepo/.git" >subdir/.git && test_when_finished "rm -f subdir/.git" && ( cd subdir && @@ -224,8 +233,8 @@ test_expect_success '__gitdir - gitfile in cwd' ' ' test_expect_success '__gitdir - gitfile in parent' ' - echo "$(pwd -P)/otherrepo/.git" >expected && - echo "gitdir: $TRASH_DIRECTORY/otherrepo/.git" >subdir/.git && + echo "$(pwd_P_W)/otherrepo/.git" >expected && + echo "gitdir: $(pwd_P_W)/otherrepo/.git" >subdir/.git && test_when_finished "rm -f subdir/.git" && ( cd subdir/subsubdir && @@ -550,6 +559,33 @@ test_expect_success 'complete files' ' test_completion "git add mom" "momified" ' +test_expect_success "completion uses <cmd> completion for alias: !sh -c 'git <cmd> ...'" ' + test_config alias.co "!sh -c '"'"'git checkout ...'"'"'" && + test_completion "git co m" <<-\EOF + master Z + mybranch Z + mytag Z + EOF +' + +test_expect_success 'completion uses <cmd> completion for alias: !f () { VAR=val git <cmd> ... }' ' + test_config alias.co "!f () { VAR=val git checkout ... ; } f" && + test_completion "git co m" <<-\EOF + master Z + mybranch Z + mytag Z + EOF +' + +test_expect_success 'completion used <cmd> completion for alias: !f() { : git <cmd> ; ... }' ' + test_config alias.co "!f() { : git checkout ; if ... } f" && + test_completion "git co m" <<-\EOF + master Z + mybranch Z + mytag Z + EOF +' + test_expect_failure 'complete with tilde expansion' ' git init tmp && cd tmp && test_when_finished "cd .. && rm -rf tmp" && diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index cf7b41f66d..dafd6ad21a 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -489,6 +489,17 @@ test_path_is_dir () { fi } +# Check if the directory exists and is empty as expected, barf otherwise. +test_dir_is_empty () { + test_path_is_dir "$1" && + if test -n "$(ls -a1 "$1" | egrep -v '^\.\.?$')" + then + echo "Directory '$1' is not empty, it contains:" + ls -la "$1" + return 1 + fi +} + test_path_is_missing () { if [ -e "$1" ] then @@ -542,7 +553,7 @@ test_must_fail () { if test $exit_code = 0; then echo >&2 "test_must_fail: command succeeded: $*" return 1 - elif test $exit_code -gt 129 -a $exit_code -le 192; then + elif test $exit_code -gt 129 && test $exit_code -le 192; then echo >&2 "test_must_fail: died by signal: $*" return 1 elif test $exit_code = 127; then @@ -569,7 +580,7 @@ test_must_fail () { test_might_fail () { "$@" exit_code=$? - if test $exit_code -gt 129 -a $exit_code -le 192; then + if test $exit_code -gt 129 && test $exit_code -le 192; then echo >&2 "test_might_fail: died by signal: $*" return 1 elif test $exit_code = 127; then @@ -723,6 +734,11 @@ test_ln_s_add () { fi } +# This function writes out its parameters, one per line +test_write_lines () { + printf "%s\n" "$@" +} + perl () { command "$PERL_PATH" "$@" } diff --git a/t/test-lib.sh b/t/test-lib.sh index c081668dfe..2b525a8e1d 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -91,6 +91,7 @@ unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e ' VALGRIND UNZIP PERF_ + CURL_VERBOSE )); my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); print join("\n", @vars); @@ -108,6 +109,10 @@ export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME export EDITOR +# Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output +GIT_TRACE_BARE=1 +export GIT_TRACE_BARE + if test -n "${TEST_GIT_INDEX_VERSION:+isset}" then GIT_INDEX_VERSION="$TEST_GIT_INDEX_VERSION" @@ -191,6 +196,14 @@ do immediate=t; shift ;; -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;; + -r) + shift; test "$#" -ne 0 || { + echo 'error: -r requires an argument' >&2; + exit 1; + } + run_list=$1; shift ;; + --run=*) + run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;; -h|--h|--he|--hel|--help) help=t; shift ;; -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) @@ -366,6 +379,99 @@ match_pattern_list () { return 1 } +match_test_selector_list () { + title="$1" + shift + arg="$1" + shift + test -z "$1" && return 0 + + # Both commas and whitespace are accepted as separators. + OLDIFS=$IFS + IFS=' ,' + set -- $1 + IFS=$OLDIFS + + # If the first selector is negative we include by default. + include= + case "$1" in + !*) include=t ;; + esac + + for selector + do + orig_selector=$selector + + positive=t + case "$selector" in + !*) + positive= + selector=${selector##?} + ;; + esac + + test -z "$selector" && continue + + case "$selector" in + *-*) + if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in range" \ + "start: '$orig_selector'" >&2 + exit 1 + fi + if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in range" \ + "end: '$orig_selector'" >&2 + exit 1 + fi + ;; + *) + if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in test" \ + "selector: '$orig_selector'" >&2 + exit 1 + fi + esac + + # Short cut for "obvious" cases + test -z "$include" && test -z "$positive" && continue + test -n "$include" && test -n "$positive" && continue + + case "$selector" in + -*) + if test $arg -le ${selector#-} + then + include=$positive + fi + ;; + *-) + if test $arg -ge ${selector%-} + then + include=$positive + fi + ;; + *-*) + if test ${selector%%-*} -le $arg \ + && test $arg -le ${selector#*-} + then + include=$positive + fi + ;; + *) + if test $arg -eq $selector + then + include=$positive + fi + ;; + esac + done + + test -n "$include" +} + maybe_teardown_verbose () { test -z "$verbose_only" && return exec 4>/dev/null 3>/dev/null @@ -452,25 +558,35 @@ test_finish_ () { test_skip () { to_skip= + skipped_reason= if match_pattern_list $this_test.$test_count $GIT_SKIP_TESTS then to_skip=t + skipped_reason="GIT_SKIP_TESTS" fi if test -z "$to_skip" && test -n "$test_prereq" && ! test_have_prereq "$test_prereq" then to_skip=t - fi - case "$to_skip" in - t) + of_prereq= if test "$missing_prereq" != "$test_prereq" then of_prereq=" of $test_prereq" fi + skipped_reason="missing $missing_prereq${of_prereq}" + fi + if test -z "$to_skip" && test -n "$run_list" && + ! match_test_selector_list '--run' $test_count "$run_list" + then + to_skip=t + skipped_reason="--run" + fi + case "$to_skip" in + t) say_color skip >&3 "skipping test: $@" - say_color skip "ok $test_count # skip $1 (missing $missing_prereq${of_prereq})" + say_color skip "ok $test_count # skip $1 ($skipped_reason)" : true ;; *) @@ -754,7 +870,6 @@ case $(uname -s) in # backslashes in pathspec are converted to '/' # exec does not inherit the PID test_set_prereq MINGW - test_set_prereq NOT_CYGWIN test_set_prereq SED_STRIPS_CR test_set_prereq GREP_STRIPS_CR GIT_TEST_CMP=mingw_test_cmp @@ -762,7 +877,6 @@ case $(uname -s) in *CYGWIN*) test_set_prereq POSIXPERM test_set_prereq EXECKEEPSPID - test_set_prereq NOT_MINGW test_set_prereq CYGWIN test_set_prereq SED_STRIPS_CR test_set_prereq GREP_STRIPS_CR @@ -771,8 +885,6 @@ case $(uname -s) in test_set_prereq POSIXPERM test_set_prereq BSLASHPSPEC test_set_prereq EXECKEEPSPID - test_set_prereq NOT_MINGW - test_set_prereq NOT_CYGWIN ;; esac @@ -864,6 +976,14 @@ test_lazy_prereq AUTOIDENT ' git var GIT_AUTHOR_IDENT ' +test_lazy_prereq EXPENSIVE ' + test -n "$GIT_TEST_LONG" +' + +test_lazy_prereq USR_BIN_TIME ' + test -x /usr/bin/time +' + # When the tests are run as root, permission tests will report that # things are writable when they shouldn't be. test -w / || test_set_prereq SANITY |