diff options
Diffstat (limited to 't')
401 files changed, 17221 insertions, 4395 deletions
@@ -69,7 +69,8 @@ You can also run each test individually from command line, like this: You can pass --verbose (or -v), --debug (or -d), and --immediate (or -i) command line argument to the test, or by setting GIT_TEST_OPTS -appropriately before running "make". +appropriately before running "make". Short options can be bundled, i.e. +'-d -v' is the same as '-dv'. -v:: --verbose:: @@ -352,8 +353,8 @@ details. GIT_TEST_SPLIT_INDEX=<boolean> forces split-index mode on the whole test suite. Accept any boolean values that are accepted by git-config. -GIT_TEST_PROTOCOL_VERSION=<n>, when set, overrides the -'protocol.version' setting to n if it is less than n. +GIT_TEST_PROTOCOL_VERSION=<n>, when set, makes 'protocol.version' +default to n. GIT_TEST_FULL_IN_PACK_ARRAY=<boolean> exercises the uncommon pack-objects code path where there are more than 1024 packs even if @@ -378,6 +379,11 @@ GIT_TEST_COMMIT_GRAPH=<boolean>, when true, forces the commit-graph to be written after every 'git commit' command, and overrides the 'core.commitGraph' setting to true. +GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=<boolean>, when true, forces +commit-graph write to compute and write changed path Bloom filters for +every 'git commit-graph write', as if the `--changed-paths` option was +passed in. + GIT_TEST_FSMONITOR=$PWD/t7519/fsmonitor-all exercises the fsmonitor code path for utilizing a file system monitor to speed up detecting new or changed files. @@ -386,17 +392,13 @@ GIT_TEST_INDEX_VERSION=<n> exercises the index read/write code path for the index version specified. Can be set to any valid version (currently 2, 3, or 4). -GIT_TEST_PACK_SPARSE=<boolean> if enabled will default the pack-objects -builtin to use the sparse object walk. This can still be overridden by -the --no-sparse command-line argument. +GIT_TEST_PACK_SPARSE=<boolean> if disabled will default the pack-objects +builtin to use the non-sparse object walk. This can still be overridden by +the --sparse command-line argument. GIT_TEST_PRELOAD_INDEX=<boolean> exercises the preload-index code path by overriding the minimum number of cache entries required per thread. -GIT_TEST_STASH_USE_BUILTIN=<boolean>, when false, disables the -built-in version of git-stash. See 'stash.useBuiltin' in -git-config(1). - GIT_TEST_ADD_I_USE_BUILTIN=<boolean>, when true, enables the built-in version of git add -i. See 'add.interactive.useBuiltin' in git-config(1). @@ -550,6 +552,41 @@ Here are the "do's:" reports "ok" or "not ok" to the end user running the tests. Under --verbose, they are shown to help debug the tests. + - Be careful when you loop + + You may need to verify multiple things in a loop, but the + following does not work correctly: + + test_expect_success 'test three things' ' + for i in one two three + do + test_something "$i" + done && + test_something_else + ' + + Because the status of the loop itself is the exit status of the + test_something in the last round, the loop does not fail when + "test_something" for "one" or "two" fails. This is not what you + want. + + Instead, you can break out of the loop immediately when you see a + failure. Because all test_expect_* snippets are executed inside + a function, "return 1" can be used to fail the test immediately + upon a failure: + + test_expect_success 'test three things' ' + for i in one two three + do + test_something "$i" || return 1 + done && + test_something_else + ' + + Note that we still &&-chain the loop to propagate failures from + earlier commands. + + And here are the "don'ts:" - Don't exit() within a <script> part. @@ -982,6 +1019,15 @@ library for your script to use. output to the downstream---unlike the real version, it generates only up to 99 lines. + - test_bool_env <env-variable-name> <default-value> + + Given the name of an environment variable with a bool value, + normalize its value to a 0 (true) or 1 (false or empty string) + return code. Return with code corresponding to the given default + value if the variable is unset. + Abort the test script if either the value of the variable or the + default are not valid bool values. + Prerequisites ------------- diff --git a/t/check-non-portable-shell.pl b/t/check-non-portable-shell.pl index 38bfeebd88..fd3303552b 100755 --- a/t/check-non-portable-shell.pl +++ b/t/check-non-portable-shell.pl @@ -46,7 +46,7 @@ while (<>) { /(?:\$\(seq|^\s*seq\b)/ and err 'seq is not portable (use test_seq)'; /\bgrep\b.*--file\b/ and err 'grep --file FILE is not portable (use grep -f FILE)'; /\bexport\s+[A-Za-z0-9_]*=/ and err '"export FOO=bar" is not portable (use FOO=bar && export FOO)'; - /^\s*([A-Z0-9_]+=(\w+|(["']).*?\3)\s+)+(\w+)/ and exists($func{$4}) and + /^\s*([A-Z0-9_]+=(\w*|(["']).*?\3)\s+)+(\w+)/ and exists($func{$4}) and err '"FOO=bar shell_func" assignment extends beyond "shell_func"'; $line = ''; # this resets our $. for each file diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh index 006d2a8152..1f32ca66ea 100644 --- a/t/gitweb-lib.sh +++ b/t/gitweb-lib.sh @@ -58,10 +58,11 @@ gitweb_run () { GATEWAY_INTERFACE='CGI/1.1' HTTP_ACCEPT='*/*' REQUEST_METHOD='GET' - QUERY_STRING=""$1"" - PATH_INFO=""$2"" + QUERY_STRING=$1 + PATH_INFO=$2 + REQUEST_URI=/gitweb.cgi$PATH_INFO export GATEWAY_INTERFACE HTTP_ACCEPT REQUEST_METHOD \ - QUERY_STRING PATH_INFO + QUERY_STRING PATH_INFO REQUEST_URI GITWEB_CONFIG=$(pwd)/gitweb_config.perl export GITWEB_CONFIG diff --git a/t/helper/test-advise.c b/t/helper/test-advise.c new file mode 100644 index 0000000000..38cdc2884e --- /dev/null +++ b/t/helper/test-advise.c @@ -0,0 +1,22 @@ +#include "test-tool.h" +#include "cache.h" +#include "advice.h" +#include "config.h" + +int cmd__advise_if_enabled(int argc, const char **argv) +{ + if (!argv[1]) + die("usage: %s <advice>", argv[0]); + + setup_git_directory(); + git_config(git_default_config, NULL); + + /* + * Any advice type can be used for testing, but NESTED_TAG was + * selected here and in t0018 where this command is being + * executed. + */ + advise_if_enabled(ADVICE_NESTED_TAG, argv[1]); + + return 0; +} diff --git a/t/helper/test-bloom.c b/t/helper/test-bloom.c new file mode 100644 index 0000000000..f0aa80b98e --- /dev/null +++ b/t/helper/test-bloom.c @@ -0,0 +1,93 @@ +#include "git-compat-util.h" +#include "bloom.h" +#include "test-tool.h" +#include "commit.h" + +static struct bloom_filter_settings settings = DEFAULT_BLOOM_FILTER_SETTINGS; + +static void add_string_to_filter(const char *data, struct bloom_filter *filter) { + struct bloom_key key; + int i; + + fill_bloom_key(data, strlen(data), &key, &settings); + printf("Hashes:"); + for (i = 0; i < settings.num_hashes; i++){ + printf("0x%08x|", key.hashes[i]); + } + printf("\n"); + add_key_to_filter(&key, filter, &settings); +} + +static void print_bloom_filter(struct bloom_filter *filter) { + int i; + + if (!filter) { + printf("No filter.\n"); + return; + } + printf("Filter_Length:%d\n", (int)filter->len); + printf("Filter_Data:"); + for (i = 0; i < filter->len; i++) { + printf("%02x|", filter->data[i]); + } + printf("\n"); +} + +static void get_bloom_filter_for_commit(const struct object_id *commit_oid) +{ + struct commit *c; + struct bloom_filter *filter; + setup_git_directory(); + c = lookup_commit(the_repository, commit_oid); + filter = get_bloom_filter(the_repository, c, 1); + print_bloom_filter(filter); +} + +static const char *bloom_usage = "\n" +" test-tool bloom get_murmur3 <string>\n" +" test-tool bloom generate_filter <string> [<string>...]\n" +" test-tool get_filter_for_commit <commit-hex>\n"; + +int cmd__bloom(int argc, const char **argv) +{ + if (argc < 2) + usage(bloom_usage); + + if (!strcmp(argv[1], "get_murmur3")) { + uint32_t hashed; + if (argc < 3) + usage(bloom_usage); + hashed = murmur3_seeded(0, argv[2], strlen(argv[2])); + printf("Murmur3 Hash with seed=0:0x%08x\n", hashed); + } + + if (!strcmp(argv[1], "generate_filter")) { + struct bloom_filter filter; + int i = 2; + filter.len = (settings.bits_per_entry + BITS_PER_WORD - 1) / BITS_PER_WORD; + filter.data = xcalloc(filter.len, sizeof(unsigned char)); + + if (argc - 1 < i) + usage(bloom_usage); + + while (argv[i]) { + add_string_to_filter(argv[i], &filter); + i++; + } + + print_bloom_filter(&filter); + } + + if (!strcmp(argv[1], "get_filter_for_commit")) { + struct object_id oid; + const char *end; + if (argc < 3) + usage(bloom_usage); + if (parse_oid_hex(argv[2], &oid, &end)) + die("cannot parse oid '%s'", argv[2]); + init_bloom_filters(); + get_bloom_filter_for_commit(&oid); + } + + return 0; +} diff --git a/t/helper/test-config.c b/t/helper/test-config.c index 214003d5b2..234c722b48 100644 --- a/t/helper/test-config.c +++ b/t/helper/test-config.c @@ -37,21 +37,6 @@ * */ -static const char *scope_name(enum config_scope scope) -{ - switch (scope) { - case CONFIG_SCOPE_SYSTEM: - return "system"; - case CONFIG_SCOPE_GLOBAL: - return "global"; - case CONFIG_SCOPE_REPO: - return "repo"; - case CONFIG_SCOPE_CMDLINE: - return "cmdline"; - default: - return "unknown"; - } -} static int iterate_cb(const char *var, const char *value, void *data) { static int nr; @@ -63,7 +48,8 @@ static int iterate_cb(const char *var, const char *value, void *data) printf("value=%s\n", value ? value : "(null)"); printf("origin=%s\n", current_config_origin_type()); printf("name=%s\n", current_config_name()); - printf("scope=%s\n", scope_name(current_config_scope())); + printf("lno=%d\n", current_config_line()); + printf("scope=%s\n", config_scope_name(current_config_scope())); return 0; } diff --git a/t/helper/test-drop-caches.c b/t/helper/test-drop-caches.c index f65e301f9d..7b4278462b 100644 --- a/t/helper/test-drop-caches.c +++ b/t/helper/test-drop-caches.c @@ -8,18 +8,21 @@ static int cmd_sync(void) { char Buffer[MAX_PATH]; DWORD dwRet; - char szVolumeAccessPath[] = "\\\\.\\X:"; + char szVolumeAccessPath[] = "\\\\.\\XXXX:"; HANDLE hVolWrite; - int success = 0; + int success = 0, dos_drive_prefix; dwRet = GetCurrentDirectory(MAX_PATH, Buffer); if ((0 == dwRet) || (dwRet > MAX_PATH)) return error("Error getting current directory"); - if (!has_dos_drive_prefix(Buffer)) + dos_drive_prefix = has_dos_drive_prefix(Buffer); + if (!dos_drive_prefix) return error("'%s': invalid drive letter", Buffer); - szVolumeAccessPath[4] = Buffer[0]; + memcpy(szVolumeAccessPath, Buffer, dos_drive_prefix); + szVolumeAccessPath[dos_drive_prefix] = '\0'; + hVolWrite = CreateFile(szVolumeAccessPath, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING, 0, NULL); if (INVALID_HANDLE_VALUE == hVolWrite) diff --git a/t/helper/test-dump-fsmonitor.c b/t/helper/test-dump-fsmonitor.c index 2786f47088..975f0ac890 100644 --- a/t/helper/test-dump-fsmonitor.c +++ b/t/helper/test-dump-fsmonitor.c @@ -13,7 +13,7 @@ int cmd__dump_fsmonitor(int ac, const char **av) printf("no fsmonitor\n"); return 0; } - printf("fsmonitor last update %"PRIuMAX"\n", (uintmax_t)istate->fsmonitor_last_update); + printf("fsmonitor last update %s\n", istate->fsmonitor_last_update); for (i = 0; i < istate->cache_nr; i++) printf((istate->cache[i]->ce_flags & CE_FSMONITOR_VALID) ? "+" : "-"); diff --git a/t/helper/test-dump-split-index.c b/t/helper/test-dump-split-index.c index 63c689d6ee..a209880eb3 100644 --- a/t/helper/test-dump-split-index.c +++ b/t/helper/test-dump-split-index.c @@ -13,6 +13,8 @@ int cmd__dump_split_index(int ac, const char **av) struct split_index *si; int i; + setup_git_directory(); + do_read_index(&the_index, av[1], 1); printf("own %s\n", oid_to_hex(&the_index.oid)); si = the_index.split_index; diff --git a/t/helper/test-sha1-array.c b/t/helper/test-oid-array.c index ad5e69f9d3..ce9fd5f091 100644 --- a/t/helper/test-sha1-array.c +++ b/t/helper/test-oid-array.c @@ -1,6 +1,6 @@ #include "test-tool.h" #include "cache.h" -#include "sha1-array.h" +#include "oid-array.h" static int print_oid(const struct object_id *oid, void *data) { @@ -8,7 +8,7 @@ static int print_oid(const struct object_id *oid, void *data) return 0; } -int cmd__sha1_array(int argc, const char **argv) +int cmd__oid_array(int argc, const char **argv) { struct oid_array array = OID_ARRAY_INIT; struct strbuf line = STRBUF_INIT; @@ -19,11 +19,11 @@ int cmd__sha1_array(int argc, const char **argv) if (skip_prefix(line.buf, "append ", &arg)) { if (get_oid_hex(arg, &oid)) - die("not a hexadecimal SHA1: %s", arg); + die("not a hexadecimal oid: %s", arg); oid_array_append(&array, &oid); } else if (skip_prefix(line.buf, "lookup ", &arg)) { if (get_oid_hex(arg, &oid)) - die("not a hexadecimal SHA1: %s", arg); + die("not a hexadecimal oid: %s", arg); printf("%d\n", oid_array_lookup(&array, &oid)); } else if (!strcmp(line.buf, "clear")) oid_array_clear(&array); diff --git a/t/helper/test-parse-options.c b/t/helper/test-parse-options.c index af82db06ac..2051ce57db 100644 --- a/t/helper/test-parse-options.c +++ b/t/helper/test-parse-options.c @@ -121,6 +121,8 @@ int cmd__parse_options(int argc, const char **argv) OPT_INTEGER('j', NULL, &integer, "get a integer, too"), OPT_MAGNITUDE('m', "magnitude", &magnitude, "get a magnitude"), OPT_SET_INT(0, "set23", &integer, "set integer to 23", 23), + OPT_CMDMODE(0, "mode1", &integer, "set integer to 1 (cmdmode option)", 1), + OPT_CMDMODE(0, "mode2", &integer, "set integer to 2 (cmdmode option)", 2), OPT_CALLBACK('L', "length", &integer, "str", "get length of <str>", length_callback), OPT_FILENAME('F', "file", &file, "set file to <file>"), diff --git a/t/helper/test-parse-pathspec-file.c b/t/helper/test-parse-pathspec-file.c new file mode 100644 index 0000000000..b3e08cef4b --- /dev/null +++ b/t/helper/test-parse-pathspec-file.c @@ -0,0 +1,33 @@ +#include "test-tool.h" +#include "parse-options.h" +#include "pathspec.h" +#include "gettext.h" + +int cmd__parse_pathspec_file(int argc, const char **argv) +{ + struct pathspec pathspec; + const char *pathspec_from_file = NULL; + int pathspec_file_nul = 0, i; + + static const char *const usage[] = { + "test-tool parse-pathspec-file --pathspec-from-file [--pathspec-file-nul]", + NULL + }; + + struct option options[] = { + OPT_PATHSPEC_FROM_FILE(&pathspec_from_file), + OPT_PATHSPEC_FILE_NUL(&pathspec_file_nul), + OPT_END() + }; + + parse_options(argc, argv, NULL, options, usage, 0); + + parse_pathspec_file(&pathspec, 0, 0, NULL, pathspec_from_file, + pathspec_file_nul); + + for (i = 0; i < pathspec.nr; i++) + printf("%s\n", pathspec.items[i].original); + + clear_pathspec(&pathspec); + return 0; +} diff --git a/t/helper/test-path-utils.c b/t/helper/test-path-utils.c index 5d543ad21f..313a153209 100644 --- a/t/helper/test-path-utils.c +++ b/t/helper/test-path-utils.c @@ -185,6 +185,99 @@ static int cmp_by_st_size(const void *a, const void *b) return x > y ? -1 : (x < y ? +1 : 0); } +/* + * A very simple, reproducible pseudo-random generator. Copied from + * `test-genrandom.c`. + */ +static uint64_t my_random_value = 1234; + +static uint64_t my_random(void) +{ + my_random_value = my_random_value * 1103515245 + 12345; + return my_random_value; +} + +/* + * A fast approximation of the square root, without requiring math.h. + * + * It uses Newton's method to approximate the solution of 0 = x^2 - value. + */ +static double my_sqrt(double value) +{ + const double epsilon = 1e-6; + double x = value; + + if (value == 0) + return 0; + + for (;;) { + double delta = (value / x - x) / 2; + if (delta < epsilon && delta > -epsilon) + return x + delta; + x += delta; + } +} + +static int protect_ntfs_hfs_benchmark(int argc, const char **argv) +{ + size_t i, j, nr, min_len = 3, max_len = 20; + char **names; + int repetitions = 15, file_mode = 0100644; + uint64_t begin, end; + double m[3][2], v[3][2]; + uint64_t cumul; + double cumul2; + + if (argc > 1 && !strcmp(argv[1], "--with-symlink-mode")) { + file_mode = 0120000; + argc--; + argv++; + } + + nr = argc > 1 ? strtoul(argv[1], NULL, 0) : 1000000; + ALLOC_ARRAY(names, nr); + + if (argc > 2) { + min_len = strtoul(argv[2], NULL, 0); + if (argc > 3) + max_len = strtoul(argv[3], NULL, 0); + if (min_len > max_len) + die("min_len > max_len"); + } + + for (i = 0; i < nr; i++) { + size_t len = min_len + (my_random() % (max_len + 1 - min_len)); + + names[i] = xmallocz(len); + while (len > 0) + names[i][--len] = (char)(' ' + (my_random() % ('\x7f' - ' '))); + } + + for (protect_ntfs = 0; protect_ntfs < 2; protect_ntfs++) + for (protect_hfs = 0; protect_hfs < 2; protect_hfs++) { + cumul = 0; + cumul2 = 0; + for (i = 0; i < repetitions; i++) { + begin = getnanotime(); + for (j = 0; j < nr; j++) + verify_path(names[j], file_mode); + end = getnanotime(); + printf("protect_ntfs = %d, protect_hfs = %d: %lfms\n", protect_ntfs, protect_hfs, (end-begin) / (double)1e6); + cumul += end - begin; + cumul2 += (end - begin) * (end - begin); + } + m[protect_ntfs][protect_hfs] = cumul / (double)repetitions; + v[protect_ntfs][protect_hfs] = my_sqrt(cumul2 / (double)repetitions - m[protect_ntfs][protect_hfs] * m[protect_ntfs][protect_hfs]); + printf("mean: %lfms, stddev: %lfms\n", m[protect_ntfs][protect_hfs] / (double)1e6, v[protect_ntfs][protect_hfs] / (double)1e6); + } + + for (protect_ntfs = 0; protect_ntfs < 2; protect_ntfs++) + for (protect_hfs = 0; protect_hfs < 2; protect_hfs++) + printf("ntfs=%d/hfs=%d: %lf%% slower\n", protect_ntfs, protect_hfs, (m[protect_ntfs][protect_hfs] - m[0][0]) * 100 / m[0][0]); + + return 0; +} + int cmd__path_utils(int argc, const char **argv) { if (argc == 3 && !strcmp(argv[1], "normalize_path_copy")) { @@ -197,11 +290,14 @@ int cmd__path_utils(int argc, const char **argv) } if (argc >= 2 && !strcmp(argv[1], "real_path")) { + struct strbuf realpath = STRBUF_INIT; while (argc > 2) { - puts(real_path(argv[2])); + strbuf_realpath(&realpath, argv[2], 1); + puts(realpath.buf); argc--; argv++; } + strbuf_release(&realpath); return 0; } @@ -355,6 +451,26 @@ int cmd__path_utils(int argc, const char **argv) return !!res; } + if (argc > 1 && !strcmp(argv[1], "protect_ntfs_hfs")) + return !!protect_ntfs_hfs_benchmark(argc - 1, argv + 1); + + if (argc > 1 && !strcmp(argv[1], "is_valid_path")) { + int res = 0, expect = 1, i; + + for (i = 2; i < argc; i++) + if (!strcmp("--not", argv[i])) + expect = 0; + else if (expect != is_valid_path(argv[i])) + res = error("'%s' is%s a valid path", + argv[i], expect ? " not" : ""); + else + fprintf(stderr, + "'%s' is%s a valid path\n", + argv[i], expect ? "" : " not"); + + return !!res; + } + fprintf(stderr, "%s: unknown function name: %s\n", argv[0], argv[1] ? argv[1] : "(there was none)"); return 1; diff --git a/t/helper/test-pkt-line.c b/t/helper/test-pkt-line.c index 282d536384..69152958e5 100644 --- a/t/helper/test-pkt-line.c +++ b/t/helper/test-pkt-line.c @@ -46,6 +46,9 @@ static void unpack(void) case PACKET_READ_DELIM: printf("0001\n"); break; + case PACKET_READ_RESPONSE_END: + printf("0002\n"); + break; } } } @@ -67,7 +70,7 @@ static void unpack_sideband(void) case PACKET_READ_NORMAL: band = reader.line[0] & 0xff; if (band < 1 || band > 2) - die("unexpected side band %d", band); + continue; /* skip non-sideband packets */ fd = band; write_or_die(fd, reader.line + 1, reader.pktlen - 1); @@ -75,6 +78,7 @@ static void unpack_sideband(void) case PACKET_READ_FLUSH: return; case PACKET_READ_DELIM: + case PACKET_READ_RESPONSE_END: break; } } diff --git a/t/helper/test-progress.c b/t/helper/test-progress.c index 42b96cb103..5d05cbe789 100644 --- a/t/helper/test-progress.c +++ b/t/helper/test-progress.c @@ -13,20 +13,13 @@ * * See 't0500-progress-display.sh' for examples. */ +#define GIT_TEST_PROGRESS_ONLY #include "test-tool.h" #include "gettext.h" #include "parse-options.h" #include "progress.h" #include "strbuf.h" -/* - * These are defined in 'progress.c', but are not exposed in 'progress.h', - * because they are exclusively for testing. - */ -extern int progress_testing; -extern uint64_t progress_test_ns; -void progress_test_force_update(void); - int cmd__progress(int argc, const char **argv) { int total = 0; diff --git a/t/helper/test-read-graph.c b/t/helper/test-read-graph.c new file mode 100644 index 0000000000..6d0c962438 --- /dev/null +++ b/t/helper/test-read-graph.c @@ -0,0 +1,46 @@ +#include "test-tool.h" +#include "cache.h" +#include "commit-graph.h" +#include "repository.h" +#include "object-store.h" + +int cmd__read_graph(int argc, const char **argv) +{ + struct commit_graph *graph = NULL; + struct object_directory *odb; + + setup_git_directory(); + odb = the_repository->objects->odb; + + graph = read_commit_graph_one(the_repository, odb); + if (!graph) + return 1; + + + printf("header: %08x %d %d %d %d\n", + ntohl(*(uint32_t*)graph->data), + *(unsigned char*)(graph->data + 4), + *(unsigned char*)(graph->data + 5), + *(unsigned char*)(graph->data + 6), + *(unsigned char*)(graph->data + 7)); + printf("num_commits: %u\n", graph->num_commits); + printf("chunks:"); + + if (graph->chunk_oid_fanout) + printf(" oid_fanout"); + if (graph->chunk_oid_lookup) + printf(" oid_lookup"); + if (graph->chunk_commit_data) + printf(" commit_metadata"); + if (graph->chunk_extra_edges) + printf(" extra_edges"); + if (graph->chunk_bloom_indexes) + printf(" bloom_indexes"); + if (graph->chunk_bloom_data) + printf(" bloom_data"); + printf("\n"); + + UNLEAK(graph); + + return 0; +} diff --git a/t/helper/test-regex.c b/t/helper/test-regex.c index 10284cc56f..d6f28ca8d1 100644 --- a/t/helper/test-regex.c +++ b/t/helper/test-regex.c @@ -1,5 +1,4 @@ #include "test-tool.h" -#include "git-compat-util.h" #include "gettext.h" struct reg_flag { @@ -8,12 +7,13 @@ struct reg_flag { }; static struct reg_flag reg_flags[] = { - { "EXTENDED", REG_EXTENDED }, - { "NEWLINE", REG_NEWLINE }, - { "ICASE", REG_ICASE }, - { "NOTBOL", REG_NOTBOL }, + { "EXTENDED", REG_EXTENDED }, + { "NEWLINE", REG_NEWLINE }, + { "ICASE", REG_ICASE }, + { "NOTBOL", REG_NOTBOL }, + { "NOTEOL", REG_NOTEOL }, #ifdef REG_STARTEND - { "STARTEND", REG_STARTEND }, + { "STARTEND", REG_STARTEND }, #endif { NULL, 0 } }; @@ -41,36 +41,74 @@ int cmd__regex(int argc, const char **argv) { const char *pat; const char *str; - int flags = 0; + int ret, silent = 0, flags = 0; regex_t r; regmatch_t m[1]; - - if (argc == 2 && !strcmp(argv[1], "--bug")) - return test_regex_bug(); - else if (argc < 3) - usage("test-tool regex --bug\n" - "test-tool regex <pattern> <string> [<options>]"); + char errbuf[64]; argv++; - pat = *argv++; - str = *argv++; - while (*argv) { - struct reg_flag *rf; - for (rf = reg_flags; rf->name; rf++) - if (!strcmp(*argv, rf->name)) { - flags |= rf->flag; - break; - } - if (!rf->name) - die("do not recognize %s", *argv); + argc--; + + if (!argc) + goto usage; + + if (!strcmp(*argv, "--bug")) { + if (argc == 1) + return test_regex_bug(); + else + goto usage; + } + if (!strcmp(*argv, "--silent")) { + silent = 1; argv++; + argc--; + } + if (!argc) + goto usage; + + pat = *argv++; + if (argc == 1) + str = NULL; + else { + str = *argv++; + while (*argv) { + struct reg_flag *rf; + for (rf = reg_flags; rf->name; rf++) + if (!strcmp(*argv, rf->name)) { + flags |= rf->flag; + break; + } + if (!rf->name) + die("do not recognize flag %s", *argv); + argv++; + } } git_setup_gettext(); - if (regcomp(&r, pat, flags)) - die("failed regcomp() for pattern '%s'", pat); - if (regexec(&r, str, 1, m, 0)) - return 1; + ret = regcomp(&r, pat, flags); + if (ret) { + if (silent) + return ret; + + regerror(ret, &r, errbuf, sizeof(errbuf)); + die("failed regcomp() for pattern '%s' (%s)", pat, errbuf); + } + if (!str) + return 0; + + ret = regexec(&r, str, 1, m, 0); + if (ret) { + if (silent || ret == REG_NOMATCH) + return ret; + + regerror(ret, &r, errbuf, sizeof(errbuf)); + die("failed regexec() for subject '%s' (%s)", str, errbuf); + } return 0; +usage: + usage("\ttest-tool regex --bug\n" + "\ttest-tool regex [--silent] <pattern>\n" + "\ttest-tool regex [--silent] <pattern> <string> [<options>]"); + return -1; } diff --git a/t/helper/test-repository.c b/t/helper/test-repository.c index f7f8618445..56f0e3c1be 100644 --- a/t/helper/test-repository.c +++ b/t/helper/test-repository.c @@ -19,12 +19,11 @@ static void test_parse_commit_in_graph(const char *gitdir, const char *worktree, memset(the_repository, 0, sizeof(*the_repository)); - /* TODO: Needed for temporary hack in hashcmp, see 183a638b7da. */ - repo_set_hash_algo(the_repository, GIT_HASH_SHA1); - if (repo_init(&r, gitdir, worktree)) die("Couldn't init repo"); + repo_set_hash_algo(the_repository, hash_algo_by_ptr(r.hash_algo)); + c = lookup_commit(&r, commit_oid); if (!parse_commit_in_graph(&r, c)) @@ -50,12 +49,11 @@ static void test_get_commit_tree_in_graph(const char *gitdir, memset(the_repository, 0, sizeof(*the_repository)); - /* TODO: Needed for temporary hack in hashcmp, see 183a638b7da. */ - repo_set_hash_algo(the_repository, GIT_HASH_SHA1); - if (repo_init(&r, gitdir, worktree)) die("Couldn't init repo"); + repo_set_hash_algo(the_repository, hash_algo_by_ptr(r.hash_algo)); + c = lookup_commit(&r, commit_oid); /* @@ -75,6 +73,10 @@ static void test_get_commit_tree_in_graph(const char *gitdir, int cmd__repository(int argc, const char **argv) { + int nongit_ok = 0; + + setup_git_directory_gently(&nongit_ok); + if (argc < 2) die("must have at least 2 arguments"); if (!strcmp(argv[1], "parse_commit_in_graph")) { diff --git a/t/helper/test-run-command.c b/t/helper/test-run-command.c index ead6dc611a..1646aa25d8 100644 --- a/t/helper/test-run-command.c +++ b/t/helper/test-run-command.c @@ -18,8 +18,8 @@ #include "string-list.h" #include "thread-utils.h" #include "wildmatch.h" -#include <string.h> -#include <errno.h> +#include "gettext.h" +#include "parse-options.h" static int number_callbacks; static int parallel_next(struct child_process *cp, @@ -200,6 +200,174 @@ static int testsuite(int argc, const char **argv) return !!ret; } +static uint64_t my_random_next = 1234; + +static uint64_t my_random(void) +{ + uint64_t res = my_random_next; + my_random_next = my_random_next * 1103515245 + 12345; + return res; +} + +static int quote_stress_test(int argc, const char **argv) +{ + /* + * We are running a quote-stress test. + * spawn a subprocess that runs quote-stress with a + * special option that echoes back the arguments that + * were passed in. + */ + char special[] = ".?*\\^_\"'`{}()[]<>@~&+:;$%"; // \t\r\n\a"; + int i, j, k, trials = 100, skip = 0, msys2 = 0; + struct strbuf out = STRBUF_INIT; + struct argv_array args = ARGV_ARRAY_INIT; + struct option options[] = { + OPT_INTEGER('n', "trials", &trials, "Number of trials"), + OPT_INTEGER('s', "skip", &skip, "Skip <n> trials"), + OPT_BOOL('m', "msys2", &msys2, "Test quoting for MSYS2's sh"), + OPT_END() + }; + const char * const usage[] = { + "test-tool run-command quote-stress-test <options>", + NULL + }; + + argc = parse_options(argc, argv, NULL, options, usage, 0); + + setenv("MSYS_NO_PATHCONV", "1", 0); + + for (i = 0; i < trials; i++) { + struct child_process cp = CHILD_PROCESS_INIT; + size_t arg_count, arg_offset; + int ret = 0; + + argv_array_clear(&args); + if (msys2) + argv_array_pushl(&args, "sh", "-c", + "printf %s\\\\0 \"$@\"", "skip", NULL); + else + argv_array_pushl(&args, "test-tool", "run-command", + "quote-echo", NULL); + arg_offset = args.argc; + + if (argc > 0) { + trials = 1; + arg_count = argc; + for (j = 0; j < arg_count; j++) + argv_array_push(&args, argv[j]); + } else { + arg_count = 1 + (my_random() % 5); + for (j = 0; j < arg_count; j++) { + char buf[20]; + size_t min_len = 1; + size_t arg_len = min_len + + (my_random() % (ARRAY_SIZE(buf) - min_len)); + + for (k = 0; k < arg_len; k++) + buf[k] = special[my_random() % + ARRAY_SIZE(special)]; + buf[arg_len] = '\0'; + + argv_array_push(&args, buf); + } + } + + if (i < skip) + continue; + + cp.argv = args.argv; + strbuf_reset(&out); + if (pipe_command(&cp, NULL, 0, &out, 0, NULL, 0) < 0) + return error("Failed to spawn child process"); + + for (j = 0, k = 0; j < arg_count; j++) { + const char *arg = args.argv[j + arg_offset]; + + if (strcmp(arg, out.buf + k)) + ret = error("incorrectly quoted arg: '%s', " + "echoed back as '%s'", + arg, out.buf + k); + k += strlen(out.buf + k) + 1; + } + + if (k != out.len) + ret = error("got %d bytes, but consumed only %d", + (int)out.len, (int)k); + + if (ret) { + fprintf(stderr, "Trial #%d failed. Arguments:\n", i); + for (j = 0; j < arg_count; j++) + fprintf(stderr, "arg #%d: '%s'\n", + (int)j, args.argv[j + arg_offset]); + + strbuf_release(&out); + argv_array_clear(&args); + + return ret; + } + + if (i && (i % 100) == 0) + fprintf(stderr, "Trials completed: %d\n", (int)i); + } + + strbuf_release(&out); + argv_array_clear(&args); + + return 0; +} + +static int quote_echo(int argc, const char **argv) +{ + while (argc > 1) { + fwrite(argv[1], strlen(argv[1]), 1, stdout); + fputc('\0', stdout); + argv++; + argc--; + } + + return 0; +} + +static int inherit_handle(const char *argv0) +{ + struct child_process cp = CHILD_PROCESS_INIT; + char path[PATH_MAX]; + int tmp; + + /* First, open an inheritable handle */ + xsnprintf(path, sizeof(path), "out-XXXXXX"); + tmp = xmkstemp(path); + + argv_array_pushl(&cp.args, + "test-tool", argv0, "inherited-handle-child", NULL); + cp.in = -1; + cp.no_stdout = cp.no_stderr = 1; + if (start_command(&cp) < 0) + die("Could not start child process"); + + /* Then close it, and try to delete it. */ + close(tmp); + if (unlink(path)) + die("Could not delete '%s'", path); + + if (close(cp.in) < 0 || finish_command(&cp) < 0) + die("Child did not finish"); + + return 0; +} + +static int inherit_handle_child(void) +{ + struct strbuf buf = STRBUF_INIT; + + if (strbuf_read(&buf, 0, 0) < 0) + die("Could not read stdin"); + printf("Received %s\n", buf.buf); + strbuf_release(&buf); + + return 0; +} + int cmd__run_command(int argc, const char **argv) { struct child_process proc = CHILD_PROCESS_INIT; @@ -207,6 +375,16 @@ int cmd__run_command(int argc, const char **argv) if (argc > 1 && !strcmp(argv[1], "testsuite")) exit(testsuite(argc - 1, argv + 1)); + if (!strcmp(argv[1], "inherited-handle")) + exit(inherit_handle(argv[0])); + if (!strcmp(argv[1], "inherited-handle-child")) + exit(inherit_handle_child()); + + if (argc >= 2 && !strcmp(argv[1], "quote-stress-test")) + return !!quote_stress_test(argc - 1, argv + 1); + + if (argc >= 2 && !strcmp(argv[1], "quote-echo")) + return !!quote_echo(argc - 1, argv + 1); if (argc < 3) return 1; diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c index 19ee26d931..590b2efca7 100644 --- a/t/helper/test-tool.c +++ b/t/helper/test-tool.c @@ -14,6 +14,8 @@ struct test_cmd { }; static struct test_cmd cmds[] = { + { "advise", cmd__advise_if_enabled }, + { "bloom", cmd__bloom }, { "chmtime", cmd__chmtime }, { "config", cmd__config }, { "ctype", cmd__ctype }, @@ -36,15 +38,18 @@ static struct test_cmd cmds[] = { { "match-trees", cmd__match_trees }, { "mergesort", cmd__mergesort }, { "mktemp", cmd__mktemp }, + { "oid-array", cmd__oid_array }, { "oidmap", cmd__oidmap }, { "online-cpus", cmd__online_cpus }, { "parse-options", cmd__parse_options }, + { "parse-pathspec-file", cmd__parse_pathspec_file }, { "path-utils", cmd__path_utils }, { "pkt-line", cmd__pkt_line }, { "prio-queue", cmd__prio_queue }, { "progress", cmd__progress }, { "reach", cmd__reach }, { "read-cache", cmd__read_cache }, + { "read-graph", cmd__read_graph }, { "read-midx", cmd__read_midx }, { "ref-store", cmd__ref_store }, { "regex", cmd__regex }, @@ -54,7 +59,6 @@ static struct test_cmd cmds[] = { { "scrap-cache-tree", cmd__scrap_cache_tree }, { "serve-v2", cmd__serve_v2 }, { "sha1", cmd__sha1 }, - { "sha1-array", cmd__sha1_array }, { "sha256", cmd__sha256 }, { "sigchain", cmd__sigchain }, { "strcmp-offset", cmd__strcmp_offset }, @@ -109,6 +113,7 @@ int cmd_main(int argc, const char **argv) argc--; trace2_cmd_name(cmds[i].name); trace2_cmd_list_config(); + trace2_cmd_list_env_vars(); return cmds[i].fn(argc, argv); } } diff --git a/t/helper/test-tool.h b/t/helper/test-tool.h index c2aa56ef50..ddc8e990e9 100644 --- a/t/helper/test-tool.h +++ b/t/helper/test-tool.h @@ -4,6 +4,8 @@ #define USE_THE_INDEX_COMPATIBILITY_MACROS #include "git-compat-util.h" +int cmd__advise_if_enabled(int argc, const char **argv); +int cmd__bloom(int argc, const char **argv); int cmd__chmtime(int argc, const char **argv); int cmd__config(int argc, const char **argv); int cmd__ctype(int argc, const char **argv); @@ -29,12 +31,14 @@ int cmd__mktemp(int argc, const char **argv); int cmd__oidmap(int argc, const char **argv); int cmd__online_cpus(int argc, const char **argv); int cmd__parse_options(int argc, const char **argv); +int cmd__parse_pathspec_file(int argc, const char** argv); int cmd__path_utils(int argc, const char **argv); int cmd__pkt_line(int argc, const char **argv); int cmd__prio_queue(int argc, const char **argv); int cmd__progress(int argc, const char **argv); int cmd__reach(int argc, const char **argv); int cmd__read_cache(int argc, const char **argv); +int cmd__read_graph(int argc, const char **argv); int cmd__read_midx(int argc, const char **argv); int cmd__ref_store(int argc, const char **argv); int cmd__regex(int argc, const char **argv); @@ -44,7 +48,7 @@ int cmd__run_command(int argc, const char **argv); int cmd__scrap_cache_tree(int argc, const char **argv); int cmd__serve_v2(int argc, const char **argv); int cmd__sha1(int argc, const char **argv); -int cmd__sha1_array(int argc, const char **argv); +int cmd__oid_array(int argc, const char **argv); int cmd__sha256(int argc, const char **argv); int cmd__sigchain(int argc, const char **argv); int cmd__strcmp_offset(int argc, const char **argv); diff --git a/t/helper/test-windows-named-pipe.c b/t/helper/test-windows-named-pipe.c index b4b752b01a..ae52183e63 100644 --- a/t/helper/test-windows-named-pipe.c +++ b/t/helper/test-windows-named-pipe.c @@ -19,7 +19,7 @@ int cmd__windows_named_pipe(int argc, const char **argv) if (argc < 2) goto print_usage; filename = argv[1]; - if (strchr(filename, '/') || strchr(filename, '\\')) + if (strpbrk(filename, "/\\")) goto print_usage; strbuf_addf(&pathname, "//./pipe/%s", filename); diff --git a/t/lib-bash.sh b/t/lib-bash.sh index 2be955fafb..b0b6060929 100644 --- a/t/lib-bash.sh +++ b/t/lib-bash.sh @@ -2,10 +2,12 @@ # to run under Bash; primarily intended for tests of the completion # script. -if test -n "$BASH" && test -z "$POSIXLY_CORRECT"; then +if test -n "$BASH" && test -z "$POSIXLY_CORRECT" +then # we are in full-on bash mode true -elif type bash >/dev/null 2>&1; then +elif type bash >/dev/null 2>&1 +then # execute in full-on bash mode unset POSIXLY_CORRECT exec bash "$0" "$@" diff --git a/t/lib-credential.sh b/t/lib-credential.sh index 937b831ea6..dea2cbef51 100755..100644 --- a/t/lib-credential.sh +++ b/t/lib-credential.sh @@ -1,4 +1,5 @@ -#!/bin/sh +# Shell library for testing credential handling including helpers. See t0302 +# for an example of testing a specific helper. # Try a set of credential helpers; the expected stdin, # stdout and stderr should be provided on stdin, @@ -19,7 +20,7 @@ check() { false fi && test_cmp expect-stdout stdout && - test_cmp expect-stderr stderr + test_i18ncmp expect-stderr stderr } read_chunk() { diff --git a/t/lib-git-daemon.sh b/t/lib-git-daemon.sh index fb8f887080..e62569222b 100644 --- a/t/lib-git-daemon.sh +++ b/t/lib-git-daemon.sh @@ -15,7 +15,7 @@ # # test_done -if ! git env--helper --type=bool --default=true --exit-code GIT_TEST_GIT_DAEMON +if ! test_bool_env GIT_TEST_GIT_DAEMON true then skip_all="git-daemon testing disabled (unset GIT_TEST_GIT_DAEMON to enable)" test_done diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh index 547b9f88e1..5aff2abe8b 100644 --- a/t/lib-git-p4.sh +++ b/t/lib-git-p4.sh @@ -175,7 +175,7 @@ stop_and_cleanup_p4d () { cleanup_git () { retry_until_success rm -r "$git" - test_must_fail test -d "$git" && + test_path_is_missing "$git" && retry_until_success mkdir "$git" } diff --git a/t/lib-git-svn.sh b/t/lib-git-svn.sh index bc0b9c71f8..7d248e6588 100644 --- a/t/lib-git-svn.sh +++ b/t/lib-git-svn.sh @@ -69,7 +69,7 @@ svn_cmd () { maybe_start_httpd () { loc=${1-svn} - if git env--helper --type=bool --default=false --exit-code GIT_TEST_SVN_HTTPD + if test_bool_env GIT_TEST_SVN_HTTPD false then . "$TEST_DIRECTORY"/lib-httpd.sh LIB_HTTPD_SVN="$loc" @@ -104,7 +104,7 @@ EOF } require_svnserve () { - if ! git env--helper --type=bool --default=false --exit-code GIT_TEST_SVNSERVE + if ! test_bool_env GIT_TEST_SVNSERVE false then skip_all='skipping svnserve test. (set $GIT_TEST_SVNSERVE to enable)' test_done diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index 8d28652b72..9fc5241228 100755..100644 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -1,14 +1,25 @@ -#!/bin/sh +# We always set GNUPGHOME, even if no usable GPG was found, as +# +# - It does not hurt, and +# +# - we cannot set global environment variables in lazy prereqs because they are +# executed in an eval'ed subshell that changes the working directory to a +# temporary one. + +GNUPGHOME="$PWD/gpghome" +export GNUPGHOME + +test_lazy_prereq GPG ' + gpg_version=$(gpg --version 2>&1) + test $? != 127 || exit 1 -gpg_version=$(gpg --version 2>&1) -if test $? != 127 -then # As said here: http://www.gnupg.org/documentation/faqs.html#q6.19 - # the gpg version 1.0.6 didn't parse trust packets correctly, so for + # the gpg version 1.0.6 did not parse trust packets correctly, so for # that version, creation of signed tags using the generated key fails. case "$gpg_version" in - 'gpg (GnuPG) 1.0.6'*) + "gpg (GnuPG) 1.0.6"*) say "Your version of gpg (1.0.6) is too buggy for testing" + exit 1 ;; *) # Available key info: @@ -27,55 +38,54 @@ then # To export ownertrust: # gpg --homedir /tmp/gpghome --export-ownertrust \ # > lib-gpg/ownertrust - mkdir ./gpghome && - chmod 0700 ./gpghome && - GNUPGHOME="$(pwd)/gpghome" && - export GNUPGHOME && - (gpgconf --kill gpg-agent >/dev/null 2>&1 || : ) && - gpg --homedir "${GNUPGHOME}" 2>/dev/null --import \ + mkdir "$GNUPGHOME" && + chmod 0700 "$GNUPGHOME" && + (gpgconf --kill gpg-agent || : ) && + gpg --homedir "${GNUPGHOME}" --import \ "$TEST_DIRECTORY"/lib-gpg/keyring.gpg && - gpg --homedir "${GNUPGHOME}" 2>/dev/null --import-ownertrust \ + gpg --homedir "${GNUPGHOME}" --import-ownertrust \ "$TEST_DIRECTORY"/lib-gpg/ownertrust && - gpg --homedir "${GNUPGHOME}" </dev/null >/dev/null 2>&1 \ - --sign -u committer@example.com && - test_set_prereq GPG && - # Available key info: - # * see t/lib-gpg/gpgsm-gen-key.in - # To generate new certificate: - # * no passphrase - # gpgsm --homedir /tmp/gpghome/ \ - # -o /tmp/gpgsm.crt.user \ - # --generate-key \ - # --batch t/lib-gpg/gpgsm-gen-key.in - # To import certificate: - # gpgsm --homedir /tmp/gpghome/ \ - # --import /tmp/gpgsm.crt.user - # To export into a .p12 we can later import: - # gpgsm --homedir /tmp/gpghome/ \ - # -o t/lib-gpg/gpgsm_cert.p12 \ - # --export-secret-key-p12 "committer@example.com" - echo | gpgsm --homedir "${GNUPGHOME}" 2>/dev/null \ - --passphrase-fd 0 --pinentry-mode loopback \ - --import "$TEST_DIRECTORY"/lib-gpg/gpgsm_cert.p12 && - - gpgsm --homedir "${GNUPGHOME}" 2>/dev/null -K | - grep fingerprint: | - cut -d" " -f4 | - tr -d '\n' >"${GNUPGHOME}/trustlist.txt" && - - echo " S relax" >>"${GNUPGHOME}/trustlist.txt" && - echo hello | gpgsm --homedir "${GNUPGHOME}" >/dev/null \ - -u committer@example.com -o /dev/null --sign - 2>&1 && - test_set_prereq GPGSM + gpg --homedir "${GNUPGHOME}" </dev/null >/dev/null \ + --sign -u committer@example.com ;; esac -fi +' + +test_lazy_prereq GPGSM ' + test_have_prereq GPG && + # Available key info: + # * see t/lib-gpg/gpgsm-gen-key.in + # To generate new certificate: + # * no passphrase + # gpgsm --homedir /tmp/gpghome/ \ + # -o /tmp/gpgsm.crt.user \ + # --generate-key \ + # --batch t/lib-gpg/gpgsm-gen-key.in + # To import certificate: + # gpgsm --homedir /tmp/gpghome/ \ + # --import /tmp/gpgsm.crt.user + # To export into a .p12 we can later import: + # gpgsm --homedir /tmp/gpghome/ \ + # -o t/lib-gpg/gpgsm_cert.p12 \ + # --export-secret-key-p12 "committer@example.com" + echo | gpgsm --homedir "${GNUPGHOME}" \ + --passphrase-fd 0 --pinentry-mode loopback \ + --import "$TEST_DIRECTORY"/lib-gpg/gpgsm_cert.p12 && + + gpgsm --homedir "${GNUPGHOME}" -K | + grep fingerprint: | + cut -d" " -f4 | + tr -d "\\n" >"${GNUPGHOME}/trustlist.txt" && + + echo " S relax" >>"${GNUPGHOME}/trustlist.txt" && + echo hello | gpgsm --homedir "${GNUPGHOME}" >/dev/null \ + -u committer@example.com -o /dev/null --sign - +' -if test_have_prereq GPG && - echo | gpg --homedir "${GNUPGHOME}" -b --rfc1991 >/dev/null 2>&1 -then - test_set_prereq RFC1991 -fi +test_lazy_prereq RFC1991 ' + test_have_prereq GPG && + echo | gpg --homedir "${GNUPGHOME}" -b --rfc1991 >/dev/null +' sanitize_pgp() { perl -ne ' diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index 0d985758c6..d2edfa4c50 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -41,7 +41,7 @@ then test_done fi -if ! git env--helper --type=bool --default=true --exit-code GIT_TEST_HTTPD +if ! test_bool_env GIT_TEST_HTTPD true then skip_all="Network testing disabled (unset GIT_TEST_HTTPD to enable)" test_done @@ -129,10 +129,12 @@ install_script () { prepare_httpd() { mkdir -p "$HTTPD_DOCUMENT_ROOT_PATH" cp "$TEST_PATH"/passwd "$HTTPD_ROOT_PATH" + install_script incomplete-length-upload-pack-v2-http.sh + install_script incomplete-body-upload-pack-v2-http.sh install_script broken-smart-http.sh install_script error-smart-http.sh install_script error.sh - install_script apply-one-time-sed.sh + install_script apply-one-time-perl.sh ln -s "$LIB_HTTPD_MODULE_PATH" "$HTTPD_ROOT_PATH/modules" diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 5c1c86c193..afa91e38b0 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -113,19 +113,27 @@ Alias /auth/dumb/ www/auth/dumb/ SetEnv GIT_EXEC_PATH ${GIT_EXEC_PATH} SetEnv GIT_HTTP_EXPORT_ALL </LocationMatch> -<LocationMatch /one_time_sed/> +<LocationMatch /one_time_perl/> SetEnv GIT_EXEC_PATH ${GIT_EXEC_PATH} SetEnv GIT_HTTP_EXPORT_ALL </LocationMatch> +ScriptAlias /smart/incomplete_length/git-upload-pack incomplete-length-upload-pack-v2-http.sh/ +ScriptAlias /smart/incomplete_body/git-upload-pack incomplete-body-upload-pack-v2-http.sh/ ScriptAliasMatch /error_git_upload_pack/(.*)/git-upload-pack error.sh/ ScriptAliasMatch /smart_*[^/]*/(.*) ${GIT_EXEC_PATH}/git-http-backend/$1 ScriptAlias /broken_smart/ broken-smart-http.sh/ ScriptAlias /error_smart/ error-smart-http.sh/ ScriptAlias /error/ error.sh/ -ScriptAliasMatch /one_time_sed/(.*) apply-one-time-sed.sh/$1 +ScriptAliasMatch /one_time_perl/(.*) apply-one-time-perl.sh/$1 <Directory ${GIT_EXEC_PATH}> Options FollowSymlinks </Directory> +<Files incomplete-length-upload-pack-v2-http.sh> + Options ExecCGI +</Files> +<Files incomplete-body-upload-pack-v2-http.sh> + Options ExecCGI +</Files> <Files broken-smart-http.sh> Options ExecCGI </Files> @@ -135,7 +143,7 @@ ScriptAliasMatch /one_time_sed/(.*) apply-one-time-sed.sh/$1 <Files error.sh> Options ExecCGI </Files> -<Files apply-one-time-sed.sh> +<Files apply-one-time-perl.sh> Options ExecCGI </Files> <Files ${GIT_EXEC_PATH}/git-http-backend> diff --git a/t/lib-httpd/apply-one-time-perl.sh b/t/lib-httpd/apply-one-time-perl.sh new file mode 100644 index 0000000000..09a0abdff7 --- /dev/null +++ b/t/lib-httpd/apply-one-time-perl.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +# If "one-time-perl" exists in $HTTPD_ROOT_PATH, run perl on the HTTP response, +# using the contents of "one-time-perl" as the perl command to be run. If the +# response was modified as a result, delete "one-time-perl" so that subsequent +# HTTP responses are no longer modified. +# +# This can be used to simulate the effects of the repository changing in +# between HTTP request-response pairs. +if test -f one-time-perl +then + LC_ALL=C + export LC_ALL + + "$GIT_EXEC_PATH/git-http-backend" >out + perl -pe "$(cat one-time-perl)" out >out_modified + + if cmp -s out out_modified + then + cat out + else + cat out_modified + rm one-time-perl + fi +else + "$GIT_EXEC_PATH/git-http-backend" +fi diff --git a/t/lib-httpd/apply-one-time-sed.sh b/t/lib-httpd/apply-one-time-sed.sh deleted file mode 100644 index fcef728925..0000000000 --- a/t/lib-httpd/apply-one-time-sed.sh +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh - -# If "one-time-sed" exists in $HTTPD_ROOT_PATH, run sed on the HTTP response, -# using the contents of "one-time-sed" as the sed command to be run. If the -# response was modified as a result, delete "one-time-sed" so that subsequent -# HTTP responses are no longer modified. -# -# This can be used to simulate the effects of the repository changing in -# between HTTP request-response pairs. -if [ -e one-time-sed ]; then - "$GIT_EXEC_PATH/git-http-backend" >out - sed "$(cat one-time-sed)" <out >out_modified - - if diff out out_modified >/dev/null; then - cat out - else - cat out_modified - rm one-time-sed - fi -else - "$GIT_EXEC_PATH/git-http-backend" -fi diff --git a/t/lib-httpd/incomplete-body-upload-pack-v2-http.sh b/t/lib-httpd/incomplete-body-upload-pack-v2-http.sh new file mode 100644 index 0000000000..90e73ef8d5 --- /dev/null +++ b/t/lib-httpd/incomplete-body-upload-pack-v2-http.sh @@ -0,0 +1,3 @@ +printf "Content-Type: text/%s\n" "application/x-git-upload-pack-result" +echo +printf "%s%s" "0079" "45" diff --git a/t/lib-httpd/incomplete-length-upload-pack-v2-http.sh b/t/lib-httpd/incomplete-length-upload-pack-v2-http.sh new file mode 100644 index 0000000000..dce552e348 --- /dev/null +++ b/t/lib-httpd/incomplete-length-upload-pack-v2-http.sh @@ -0,0 +1,3 @@ +printf "Content-Type: text/%s\n" "application/x-git-upload-pack-result" +echo +printf "%s" "00" diff --git a/t/lib-log-graph.sh b/t/lib-log-graph.sh new file mode 100644 index 0000000000..1184cceef2 --- /dev/null +++ b/t/lib-log-graph.sh @@ -0,0 +1,28 @@ +# Helps shared by the test scripts for comparing log graphs. + +sanitize_log_output () { + sed -e 's/ *$//' \ + -e 's/commit [0-9a-f]*$/commit COMMIT_OBJECT_NAME/' \ + -e 's/Merge: [ 0-9a-f]*$/Merge: MERGE_PARENTS/' \ + -e 's/Merge tag.*/Merge HEADS DESCRIPTION/' \ + -e 's/Merge commit.*/Merge HEADS DESCRIPTION/' \ + -e 's/index [0-9a-f]*\.\.[0-9a-f]*/index BEFORE..AFTER/' +} + +lib_test_cmp_graph () { + git log --graph "$@" >output && + sed 's/ *$//' >output.sanitized <output && + test_i18ncmp expect output.sanitized +} + +lib_test_cmp_short_graph () { + git log --graph --pretty=short "$@" >output && + sanitize_log_output >output.sanitized <output && + test_i18ncmp expect output.sanitized +} + +lib_test_cmp_colored_graph () { + git log --graph --color=always "$@" >output.colors.raw && + test_decode_color <output.colors.raw | sed "s/ *\$//" >output.colors && + test_cmp expect.colors output.colors +} diff --git a/t/lib-pack.sh b/t/lib-pack.sh index c4d907a450..f3463170b3 100644 --- a/t/lib-pack.sh +++ b/t/lib-pack.sh @@ -35,9 +35,11 @@ pack_header () { # have hardcoded some well-known objects. See the case statements below for the # complete list. pack_obj () { + test_oid_init + case "$1" in # empty blob - e69de29bb2d1d6434b8b29ae775ad8c2e48c5391) + $EMPTY_BLOB) case "$2" in '') printf '\060\170\234\003\0\0\0\0\1' @@ -47,7 +49,7 @@ pack_obj () { ;; # blob containing "\7\76" - e68fe8129b546b101aee9510c5328e7f21ca1d18) + $(test_oid packlib_7_76)) case "$2" in '') printf '\062\170\234\143\267\3\0\0\116\0\106' @@ -59,11 +61,18 @@ pack_obj () { printf '\234\143\142\142\142\267\003\0\0\151\0\114' return ;; + 37c8e2c15bb22b912e59b43fd51a4f7e9465ed0b5084c5a1411d991cbe630683) + printf '\165\67\310\342\301\133\262\53\221\56\131' && + printf '\264\77\325\32\117\176\224\145\355\13\120' && + printf '\204\305\241\101\35\231\34\276\143\6\203\170' && + printf '\234\143\142\142\142\267\003\0\0\151\0\114' + return + ;; esac ;; # blob containing "\7\0" - 01d7713666f4de822776c7622c10f1b07de280dc) + $(test_oid packlib_7_0)) case "$2" in '') printf '\062\170\234\143\147\0\0\0\20\0\10' @@ -75,6 +84,13 @@ pack_obj () { printf '\143\142\142\142\147\0\0\0\53\0\16' return ;; + 5d8e6fc40f2dab00e6983a48523fe57e621f46434cb58dbd4422fba03380d886) + printf '\165\135\216\157\304\17\55\253\0\346\230\72' && + printf '\110\122\77\345\176\142\37\106\103\114\265' && + printf '\215\275\104\42\373\240\63\200\330\206\170\234' && + printf '\143\142\142\142\147\0\0\0\53\0\16' + return + ;; esac ;; esac @@ -86,7 +102,7 @@ pack_obj () { then echo "$1" | git pack-objects --stdout >pack_obj.tmp && size=$(wc -c <pack_obj.tmp) && - dd if=pack_obj.tmp bs=1 count=$((size - 20 - 12)) skip=12 && + dd if=pack_obj.tmp bs=1 count=$((size - $(test_oid rawsz) - 12)) skip=12 && rm -f pack_obj.tmp return fi @@ -97,7 +113,8 @@ pack_obj () { # Compute and append pack trailer to "$1" pack_trailer () { - test-tool sha1 -b <"$1" >trailer.tmp && + test_oid_init && + test-tool $(test_oid algo) -b <"$1" >trailer.tmp && cat trailer.tmp >>"$1" && rm -f trailer.tmp } @@ -108,3 +125,11 @@ pack_trailer () { clear_packs () { rm -f .git/objects/pack/* } + +test_oid_cache <<-EOF +packlib_7_0 sha1:01d7713666f4de822776c7622c10f1b07de280dc +packlib_7_0 sha256:37c8e2c15bb22b912e59b43fd51a4f7e9465ed0b5084c5a1411d991cbe630683 + +packlib_7_76 sha1:e68fe8129b546b101aee9510c5328e7f21ca1d18 +packlib_7_76 sha256:5d8e6fc40f2dab00e6983a48523fe57e621f46434cb58dbd4422fba03380d886 +EOF diff --git a/t/lib-rebase.sh b/t/lib-rebase.sh index 6d87961e41..b72c051f47 100644 --- a/t/lib-rebase.sh +++ b/t/lib-rebase.sh @@ -119,3 +119,31 @@ make_empty () { git commit --allow-empty -m "$1" && git tag "$1" } + +# Call this (inside test_expect_success) at the end of a test file to +# check that no tests have changed editor related environment +# variables or config settings +test_editor_unchanged () { + # We're only interested in exported variables hence 'sh -c' + sh -c 'cat >actual <<-EOF + EDITOR=$EDITOR + FAKE_COMMIT_AMEND=$FAKE_COMMIT_AMEND + FAKE_COMMIT_MESSAGE=$FAKE_COMMIT_MESSAGE + FAKE_LINES=$FAKE_LINES + GIT_EDITOR=$GIT_EDITOR + GIT_SEQUENCE_EDITOR=$GIT_SEQUENCE_EDITOR + core.editor=$(git config core.editor) + sequence.editor=$(git config sequence.editor) + EOF' + cat >expect <<-\EOF + EDITOR=: + FAKE_COMMIT_AMEND= + FAKE_COMMIT_MESSAGE= + FAKE_LINES= + GIT_EDITOR= + GIT_SEQUENCE_EDITOR= + core.editor= + sequence.editor= + EOF + test_cmp expect actual +} diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index 1dd17fc03e..64fc6487dd 100755..100644 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -297,7 +297,7 @@ test_submodule_content () { # - Directory containing tracked files replaced by submodule # - Submodule replaced by tracked files in directory # - Submodule replaced by tracked file with the same name -# - tracked file replaced by submodule +# - Tracked file replaced by submodule # # The default is that submodule contents aren't changed until "git submodule # update" is run. And even then that command doesn't delete the work tree of @@ -621,11 +621,13 @@ test_submodule_forced_switch () { # - Directory containing tracked files replaced by submodule # - Submodule replaced by tracked files in directory # - Submodule replaced by tracked file with the same name -# - tracked file replaced by submodule +# - Tracked file replaced by submodule # # New test cases # - Removing a submodule with a git directory absorbs the submodules # git directory first into the superproject. +# - Switching from no submodule to nested submodules +# - Switching from nested submodules to no submodule # Internal function; use test_submodule_switch_recursing_with_args() or # test_submodule_forced_switch_recursing_with_args() instead. @@ -658,22 +660,6 @@ test_submodule_recursing_with_args_common() { test_submodule_content sub1 origin/add_sub1 ) ' - test_expect_success "$command: submodule branch is not changed, detach HEAD instead" ' - prolog && - reset_work_tree_to_interested add_sub1 && - ( - cd submodule_update && - git -C sub1 checkout -b keep_branch && - git -C sub1 rev-parse HEAD >expect && - git branch -t modify_sub1 origin/modify_sub1 && - $command modify_sub1 && - test_superproject_content origin/modify_sub1 && - test_submodule_content sub1 origin/modify_sub1 && - git -C sub1 rev-parse keep_branch >actual && - test_cmp expect actual && - test_must_fail git -C sub1 symbolic-ref HEAD - ) - ' # Replacing a tracked file with a submodule produces a checked out submodule test_expect_success "$command: replace tracked file with submodule checks out submodule" ' @@ -699,6 +685,19 @@ test_submodule_recursing_with_args_common() { test_submodule_content sub1 origin/replace_directory_with_sub1 ) ' + # Switching to a commit with nested submodules recursively checks them out + test_expect_success "$command: nested submodules are checked out" ' + prolog && + reset_work_tree_to_interested no_submodule && + ( + cd submodule_update && + git branch -t modify_sub1_recursively origin/modify_sub1_recursively && + $command modify_sub1_recursively && + test_superproject_content origin/modify_sub1_recursively && + test_submodule_content sub1 origin/modify_sub1_recursively && + test_submodule_content -C sub1 sub2 origin/modify_sub1_recursively + ) + ' ######################## Disappearing submodule ####################### # Removing a submodule removes its work tree ... @@ -762,6 +761,21 @@ test_submodule_recursing_with_args_common() { ) ' + # Switching to a commit without nested submodules removes their worktrees + test_expect_success "$command: worktrees of nested submodules are removed" ' + prolog && + reset_work_tree_to_interested add_nested_sub && + ( + cd submodule_update && + git branch -t no_submodule origin/no_submodule && + $command no_submodule && + test_superproject_content origin/no_submodule && + ! test_path_is_dir sub1 && + test_must_fail git config -f .git/modules/sub1/config core.worktree && + test_must_fail git config -f .git/modules/sub1/modules/sub2/config core.worktree + ) + ' + ########################## Modified submodule ######################### # Updating a submodule sha1 updates the submodule's work tree test_expect_success "$command: modified submodule updates submodule work tree" ' @@ -789,6 +803,23 @@ test_submodule_recursing_with_args_common() { test_submodule_content sub1 origin/add_sub1 ) ' + # Updating a submodule does not touch the currently checked out branch in the submodule + test_expect_success "$command: submodule branch is not changed, detach HEAD instead" ' + prolog && + reset_work_tree_to_interested add_sub1 && + ( + cd submodule_update && + git -C sub1 checkout -b keep_branch && + git -C sub1 rev-parse HEAD >expect && + git branch -t modify_sub1 origin/modify_sub1 && + $command modify_sub1 && + test_superproject_content origin/modify_sub1 && + test_submodule_content sub1 origin/modify_sub1 && + git -C sub1 rev-parse keep_branch >actual && + test_cmp expect actual && + test_must_fail git -C sub1 symbolic-ref HEAD + ) + ' } # Declares and invokes several tests that, in various situations, checks that @@ -908,7 +939,6 @@ test_submodule_switch_recursing_with_args () { ) ' - # recursing deeper than one level doesn't work yet. test_expect_success "$command: modified submodule updates submodule recursively" ' prolog && reset_work_tree_to_interested add_nested_sub && diff --git a/t/oid-info/hash-info b/t/oid-info/hash-info index ccdbfdf974..d0736dd1a0 100644 --- a/t/oid-info/hash-info +++ b/t/oid-info/hash-info @@ -6,3 +6,12 @@ hexsz sha256:64 zero sha1:0000000000000000000000000000000000000000 zero sha256:0000000000000000000000000000000000000000000000000000000000000000 + +algo sha1:sha1 +algo sha256:sha256 + +empty_blob sha1:e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +empty_blob sha256:473a0f4c3be8a93681a267e3b1e9a7dcda1185436fe141f7749120a303721813 + +empty_tree sha1:4b825dc642cb6eb9a060e54bf8d69288fbee4904 +empty_tree sha256:6ef19b41225c5369f1c104d45d8d85efa9b057b53b14b4b9b939dd74decc5321 diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index 66554d2161..14e4cda287 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -4,7 +4,6 @@ use lib '../../perl/build/lib'; use strict; use warnings; use Getopt::Long; -use Git; use Cwd qw(realpath); sub get_times { @@ -85,6 +84,11 @@ sub format_size { return $out; } +sub sane_backticks { + open(my $fh, '-|', @_); + return <$fh>; +} + my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests, $codespeed, $sortby, $subsection, $reponame); @@ -102,7 +106,8 @@ while (scalar @ARGV) { my $prefix = ''; last if -f $arg or $arg eq "--"; if (! -d $arg) { - my $rev = Git::command_oneline(qw(rev-parse --verify), $arg); + my $rev = sane_backticks(qw(git rev-parse --verify), $arg); + chomp $rev; $dir = "build/".$rev; } elsif ($arg eq '.') { $dir = '.'; @@ -219,13 +224,7 @@ sub print_default_results { for my $i (0..$#dirs) { my $d = $dirs[$i]; my $base = "$resultsdir/$prefixes{$d}$t"; - $times{$prefixes{$d}.$t} = []; - foreach my $type (qw(times size)) { - if (-e "$base.$type") { - $times{$prefixes{$d}.$t} = [get_times("$base.$type")]; - last; - } - } + $times{$prefixes{$d}.$t} = [get_times("$base.result")]; my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; my $w = length format_times($r,$u,$s,$firstr); $colwidth[$i] = $w if $w > $colwidth[$i]; @@ -267,7 +266,7 @@ sub print_sorted_results { my ($prevr, $prevu, $prevs, $prevrev); for my $i (0..$#dirs) { my $d = $dirs[$i]; - my ($r, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.times"); + my ($r, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.result"); if ($i > 0 and defined $r and defined $prevr and $prevr > 0) { my $percent = 100.0 * ($r - $prevr) / $prevr; push @evolutions, { "percent" => $percent, @@ -327,7 +326,7 @@ sub print_codespeed_results { my $commitid = $prefixes{$d}; $commitid =~ s/^build_//; $commitid =~ s/\.$//; - my ($result_value, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.times"); + my ($result_value, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.result"); my %vals = ( "commitid" => $commitid, diff --git a/t/perf/bisect_regression b/t/perf/bisect_regression index a94d9955d0..ce47e1662a 100755 --- a/t/perf/bisect_regression +++ b/t/perf/bisect_regression @@ -51,7 +51,7 @@ oldtime=$(echo "$oldtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') newtime=$(echo "$newtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') test $(echo "$newtime" "$oldtime" | awk '{ print ($1 > $2) }') = 1 || - die "New time '$newtime' shoud be greater than old time '$oldtime'" + die "New time '$newtime' should be greater than old time '$oldtime'" tmpdir=$(mktemp -d -t bisect_regression_XXXXXX) || die "Failed to create temp directory" echo "$oldtime" >"$tmpdir/oldtime" || die "Failed to write to '$tmpdir/oldtime'" diff --git a/t/perf/p5303-many-packs.sh b/t/perf/p5303-many-packs.sh index 3779851941..7ee791669a 100755 --- a/t/perf/p5303-many-packs.sh +++ b/t/perf/p5303-many-packs.sh @@ -77,6 +77,7 @@ do # actual pack generation, without smudging the on-disk setup # between trials. test_perf "repack ($nr_packs)" ' + GIT_TEST_FULL_IN_PACK_ARRAY=1 \ git pack-objects --keep-true-parents \ --honor-pack-keep --non-empty --all \ --reflog --indexed-objects --delta-base-offset \ @@ -84,4 +85,22 @@ do ' done +# Measure pack loading with 10,000 packs. +test_expect_success 'generate lots of packs' ' + for i in $(test_seq 10000); do + echo "blob" + echo "data <<EOF" + echo "blob $i" + echo "EOF" + echo "checkpoint" + done | + git -c fastimport.unpackLimit=0 fast-import +' + +# The purpose of this test is to evaluate load time for a large number +# of packs while doing as little other work as possible. +test_perf "load 10,000 packs" ' + git rev-parse --verify "HEAD^{commit}" +' + test_done diff --git a/t/perf/p5310-pack-bitmaps.sh b/t/perf/p5310-pack-bitmaps.sh index 6a3a42531b..b3e725f031 100755 --- a/t/perf/p5310-pack-bitmaps.sh +++ b/t/perf/p5310-pack-bitmaps.sh @@ -31,14 +31,37 @@ test_perf 'simulated fetch' ' } | git pack-objects --revs --stdout >/dev/null ' -test_perf 'pack to file' ' - git pack-objects --all pack1 </dev/null >/dev/null -' - test_perf 'pack to file (bitmap)' ' git pack-objects --use-bitmap-index --all pack1b </dev/null >/dev/null ' +test_perf 'rev-list (commits)' ' + git rev-list --all --use-bitmap-index >/dev/null +' + +test_perf 'rev-list (objects)' ' + git rev-list --all --use-bitmap-index --objects >/dev/null +' + +test_perf 'rev-list count with blob:none' ' + git rev-list --use-bitmap-index --count --objects --all \ + --filter=blob:none >/dev/null +' + +test_perf 'rev-list count with blob:limit=1k' ' + git rev-list --use-bitmap-index --count --objects --all \ + --filter=blob:limit=1k >/dev/null +' + +test_perf 'rev-list count with tree:0' ' + git rev-list --use-bitmap-index --count --objects --all \ + --filter=tree:0 >/dev/null +' + +test_perf 'simulated partial clone' ' + git pack-objects --stdout --all --filter=blob:none </dev/null >/dev/null +' + test_expect_success 'create partial bitmap state' ' # pick a commit to represent the repo tip in the past cutoff=$(git rev-list HEAD~100 -1) && @@ -68,4 +91,9 @@ test_perf 'pack to file (partial bitmap)' ' git pack-objects --use-bitmap-index --all pack2b </dev/null >/dev/null ' +test_perf 'rev-list with tree filter (partial bitmap)' ' + git rev-list --use-bitmap-index --count --objects --all \ + --filter=tree:0 >/dev/null +' + test_done diff --git a/t/perf/p9300-fast-import-export.sh b/t/perf/p9300-fast-import-export.sh new file mode 100755 index 0000000000..586161e9ad --- /dev/null +++ b/t/perf/p9300-fast-import-export.sh @@ -0,0 +1,23 @@ +#!/bin/sh + +test_description='test fast-import and fast-export performance' +. ./perf-lib.sh + +test_perf_default_repo + +# Use --no-data here to produce a vastly smaller export file. +# This is much cheaper to work with but should still exercise +# fast-import pretty well (we'll still process all commits and +# trees, which account for 60% or more of objects in most repos). +# +# Use --reencode to avoid the default of aborting on non-utf8 commits, +# which lets this test run against a wider variety of sample repos. +test_perf 'export (no-blobs)' ' + git fast-export --reencode=yes --no-data HEAD >export +' + +test_perf 'import (no-blobs)' ' + git fast-import --force <export +' + +test_done diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh index b58a43ea43..13e389367a 100644 --- a/t/perf/perf-lib.sh +++ b/t/perf/perf-lib.sh @@ -214,7 +214,7 @@ test_perf_ () { else test_ok_ "$1" fi - "$TEST_DIRECTORY"/perf/min_time.perl test_time.* >"$base".times + "$TEST_DIRECTORY"/perf/min_time.perl test_time.* >"$base".result } test_perf () { @@ -223,7 +223,7 @@ test_perf () { test_size_ () { say >&3 "running: $2" - if test_eval_ "$2" 3>"$base".size; then + if test_eval_ "$2" 3>"$base".result; then test_ok_ "$1" else test_failure_ "$@" diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 4d3f7ba295..2ff176cd5d 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -20,9 +20,9 @@ modification *should* take notice and update the test vectors here. . ./test-lib.sh -try_local_x () { - local x="local" && - echo "$x" +try_local_xy () { + local x="local" y="alsolocal" && + echo "$x $y" } # Check whether the shell supports the "local" keyword. "local" is not @@ -35,11 +35,12 @@ try_local_x () { # relying on "local". test_expect_success 'verify that the running shell supports "local"' ' x="notlocal" && - echo "local" >expected1 && - try_local_x >actual1 && + y="alsonotlocal" && + echo "local alsolocal" >expected1 && + try_local_xy >actual1 && test_cmp expected1 actual1 && - echo "notlocal" >expected2 && - echo "$x" >actual2 && + echo "notlocal alsonotlocal" >expected2 && + echo "$x $y" >actual2 && test_cmp expected2 actual2 ' @@ -76,9 +77,7 @@ _run_sub_test_lib_test_common () { # the sub-test. sane_unset HARNESS_ACTIVE && cd "$name" && - cat >"$name.sh" <<-EOF && - #!$SHELL_PATH - + write_script "$name.sh" "$TEST_SHELL_PATH" <<-EOF && test_description='$descr (run in sub test-lib) This is run in a sub test-lib so that we do not get incorrect @@ -93,15 +92,15 @@ _run_sub_test_lib_test_common () { . "\$TEST_DIRECTORY"/test-lib.sh EOF cat >>"$name.sh" && - chmod +x "$name.sh" && export TEST_DIRECTORY && TEST_OUTPUT_DIRECTORY=$(pwd) && export TEST_OUTPUT_DIRECTORY && + sane_unset GIT_TEST_FAIL_PREREQS && if test -z "$neg" then ./"$name.sh" "$@" >out 2>err else - ! ./"$name.sh" "$@" >out 2>err + ! ./"$name.sh" "$@" >out 2>err fi ) } @@ -126,7 +125,7 @@ check_sub_test_lib_test () { check_sub_test_lib_test_err () { name="$1" # stdin is the expected output from the test - # expected error output is in descriptior 3 + # expected error output is in descriptor 3 ( cd "$name" && sed -e 's/^> //' -e 's/Z$//' >expect.out && @@ -154,7 +153,7 @@ test_expect_success 'pretend we have a fully passing test suite' " " test_expect_success 'pretend we have a partially passing test suite' " - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ partial-pass '2/3 tests passing' <<-\\EOF && test_expect_success 'passing test #1' 'true' test_expect_success 'failing test #2' 'false' @@ -218,7 +217,7 @@ test_expect_success 'pretend we have fixed one of two known breakages (run in su " test_expect_success 'pretend we have a pass, fail, and known breakage' " - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ mixed-results1 'mixed results #1' <<-\\EOF && test_expect_success 'passing test' 'true' test_expect_success 'failing test' 'false' @@ -237,7 +236,7 @@ test_expect_success 'pretend we have a pass, fail, and known breakage' " " test_expect_success 'pretend we have a mix of all possible results' " - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ mixed-results2 'mixed results #2' <<-\\EOF && test_expect_success 'passing test' 'true' test_expect_success 'passing test' 'true' @@ -273,7 +272,7 @@ test_expect_success 'pretend we have a mix of all possible results' " " test_expect_success C_LOCALE_OUTPUT 'test --verbose' ' - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ t1234-verbose "test verbose" --verbose <<-\EOF && test_expect_success "passing test" true test_expect_success "test with output" "echo foo" @@ -300,7 +299,7 @@ test_expect_success C_LOCALE_OUTPUT 'test --verbose' ' ' test_expect_success 'test --verbose-only' ' - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ t2345-verbose-only-2 "test verbose-only=2" \ --verbose-only=2 <<-\EOF && test_expect_success "passing test" true @@ -832,8 +831,21 @@ then exit 1 fi +test_expect_success 'lazy prereqs do not turn off tracing' " + run_sub_test_lib_test lazy-prereq-and-tracing \ + 'lazy prereqs and -x' -v -x <<-\\EOF && + test_lazy_prereq LAZY true + + test_expect_success lazy 'test_have_prereq LAZY && echo trace' + + test_done + EOF + + grep 'echo trace' lazy-prereq-and-tracing/err +" + test_expect_success 'tests clean up even on failures' " - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ failing-cleanup 'Failing tests with cleanup commands' <<-\\EOF && test_expect_success 'tests clean up even after a failure' ' touch clean-after-failure && @@ -862,7 +874,7 @@ test_expect_success 'tests clean up even on failures' " " test_expect_success 'test_atexit is run' " - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ atexit-cleanup 'Run atexit commands' -i <<-\\EOF && test_expect_success 'tests clean up even after a failure' ' > ../../clean-atexit && @@ -916,6 +928,40 @@ test_expect_success 'test_oid can look up data for SHA-256' ' test "$hexsz" -eq 64 ' +test_expect_success 'test_bool_env' ' + ( + sane_unset envvar && + + test_bool_env envvar true && + ! test_bool_env envvar false && + + envvar= && + export envvar && + ! test_bool_env envvar true && + ! test_bool_env envvar false && + + envvar=true && + test_bool_env envvar true && + test_bool_env envvar false && + + envvar=false && + ! test_bool_env envvar true && + ! test_bool_env envvar false && + + envvar=invalid && + # When encountering an invalid bool value, test_bool_env + # prints its error message to the original stderr of the + # test script, hence the redirection of fd 7, and aborts + # with "exit 1", hence the subshell. + ! ( test_bool_env envvar true ) 7>err && + grep "error: test_bool_env requires bool values" err && + + envvar=true && + ! ( test_bool_env envvar invalid ) 7>err && + grep "error: test_bool_env requires bool values" err + ) +' + ################################################################ # Basics of the basics diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 26f8206326..1edd5aeb8f 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -392,13 +392,6 @@ test_expect_success SYMLINKS 're-init to move gitdir symlink' ' test_path_is_dir realgitdir/refs ' -# Tests for the hidden file attribute on windows -is_hidden () { - # Use the output of `attrib`, ignore the absolute path - case "$(attrib "$1")" in *H*?:*) return 0;; esac - return 1 -} - test_expect_success MINGW '.git hidden' ' rm -rf newdir && ( @@ -406,7 +399,7 @@ test_expect_success MINGW '.git hidden' ' mkdir newdir && cd newdir && git init && - is_hidden .git + test_path_is_hidden .git ) && check_config newdir/.git false unset ' diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh index 71e63d8b50..b660593c20 100755 --- a/t/t0003-attributes.sh +++ b/t/t0003-attributes.sh @@ -5,19 +5,16 @@ test_description=gitattributes . ./test-lib.sh attr_check () { - path="$1" expect="$2" + path="$1" expect="$2" git_opts="$3" && - git $3 check-attr test -- "$path" >actual 2>err && - echo "$path: test: $2" >expect && + git $git_opts check-attr test -- "$path" >actual 2>err && + echo "$path: test: $expect" >expect && test_cmp expect actual && - test_line_count = 0 err + test_must_be_empty err } attr_check_quote () { - - path="$1" - quoted_path="$2" - expect="$3" + path="$1" quoted_path="$2" expect="$3" && git check-attr test -- "$path" >actual && echo "\"$quoted_path\": test: $expect" >expect && @@ -27,7 +24,7 @@ attr_check_quote () { test_expect_success 'open-quoted pathname' ' echo "\"a test=a" >.gitattributes && - test_must_fail attr_check a a + attr_check a unspecified ' @@ -112,20 +109,20 @@ test_expect_success 'attribute test' ' test_expect_success 'attribute matching is case sensitive when core.ignorecase=0' ' - test_must_fail attr_check F f "-c core.ignorecase=0" && - test_must_fail attr_check a/F f "-c core.ignorecase=0" && - test_must_fail attr_check a/c/F f "-c core.ignorecase=0" && - test_must_fail attr_check a/G a/g "-c core.ignorecase=0" && - test_must_fail attr_check a/B/g a/b/g "-c core.ignorecase=0" && - test_must_fail attr_check a/b/G a/b/g "-c core.ignorecase=0" && - test_must_fail attr_check a/b/H a/b/h "-c core.ignorecase=0" && - test_must_fail attr_check a/b/D/g "a/b/d/*" "-c core.ignorecase=0" && - test_must_fail attr_check oNoFf unset "-c core.ignorecase=0" && - test_must_fail attr_check oFfOn set "-c core.ignorecase=0" && + attr_check F unspecified "-c core.ignorecase=0" && + attr_check a/F unspecified "-c core.ignorecase=0" && + attr_check a/c/F unspecified "-c core.ignorecase=0" && + attr_check a/G unspecified "-c core.ignorecase=0" && + attr_check a/B/g a/g "-c core.ignorecase=0" && + attr_check a/b/G unspecified "-c core.ignorecase=0" && + attr_check a/b/H unspecified "-c core.ignorecase=0" && + attr_check a/b/D/g a/g "-c core.ignorecase=0" && + attr_check oNoFf unspecified "-c core.ignorecase=0" && + attr_check oFfOn unspecified "-c core.ignorecase=0" && attr_check NO unspecified "-c core.ignorecase=0" && - test_must_fail attr_check a/b/D/NO "a/b/d/*" "-c core.ignorecase=0" && + attr_check a/b/D/NO unspecified "-c core.ignorecase=0" && attr_check a/b/d/YES a/b/d/* "-c core.ignorecase=0" && - test_must_fail attr_check a/E/f "A/e/F" "-c core.ignorecase=0" + attr_check a/E/f f "-c core.ignorecase=0" ' @@ -149,8 +146,8 @@ test_expect_success 'attribute matching is case insensitive when core.ignorecase ' test_expect_success CASE_INSENSITIVE_FS 'additional case insensitivity tests' ' - test_must_fail attr_check a/B/D/g "a/b/d/*" "-c core.ignorecase=0" && - test_must_fail attr_check A/B/D/NO "a/b/d/*" "-c core.ignorecase=0" && + attr_check a/B/D/g a/g "-c core.ignorecase=0" && + attr_check A/B/D/NO unspecified "-c core.ignorecase=0" && attr_check A/b/h a/b/h "-c core.ignorecase=1" && attr_check a/B/D/g "a/b/d/*" "-c core.ignorecase=1" && attr_check A/B/D/NO "a/b/d/*" "-c core.ignorecase=1" @@ -244,7 +241,7 @@ EOF git check-attr foo -- "a/b/f" >>actual 2>>err && git check-attr foo -- "a/b/c/f" >>actual 2>>err && test_cmp expect actual && - test_line_count = 0 err + test_must_be_empty err ' test_expect_success '"**" with no slashes test' ' @@ -265,7 +262,7 @@ EOF git check-attr foo -- "a/b/f" >>actual 2>>err && git check-attr foo -- "a/b/c/f" >>actual 2>>err && test_cmp expect actual && - test_line_count = 0 err + test_must_be_empty err ' test_expect_success 'using --git-dir and --work-tree' ' diff --git a/t/t0006-date.sh b/t/t0006-date.sh index d9fcc829a9..75ee9a96b8 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -81,6 +81,11 @@ check_parse 2008-02 bad check_parse 2008-02-14 bad check_parse '2008-02-14 20:30:45' '2008-02-14 20:30:45 +0000' check_parse '2008-02-14 20:30:45 -0500' '2008-02-14 20:30:45 -0500' +check_parse '2008.02.14 20:30:45 -0500' '2008-02-14 20:30:45 -0500' +check_parse '20080214T203045-04:00' '2008-02-14 20:30:45 -0400' +check_parse '20080214T203045 -04:00' '2008-02-14 20:30:45 -0400' +check_parse '20080214T203045.019-04:00' '2008-02-14 20:30:45 -0400' +check_parse '2008-02-14 20:30:45.019-04:00' '2008-02-14 20:30:45 -0400' check_parse '2008-02-14 20:30:45 -0015' '2008-02-14 20:30:45 -0015' check_parse '2008-02-14 20:30:45 -5' '2008-02-14 20:30:45 +0000' check_parse '2008-02-14 20:30:45 -5:' '2008-02-14 20:30:45 +0000' @@ -103,6 +108,7 @@ check_approxidate 5.seconds.ago '2009-08-30 19:19:55' check_approxidate 10.minutes.ago '2009-08-30 19:10:00' check_approxidate yesterday '2009-08-29 19:20:00' check_approxidate 3.days.ago '2009-08-27 19:20:00' +check_approxidate '12:34:56.3.days.ago' '2009-08-27 12:34:56' check_approxidate 3.weeks.ago '2009-08-09 19:20:00' check_approxidate 3.months.ago '2009-05-30 19:20:00' check_approxidate 2.years.3.months.ago '2007-05-30 19:20:00' diff --git a/t/t0007-git-var.sh b/t/t0007-git-var.sh index 1f600e2cae..88b9ae8158 100755 --- a/t/t0007-git-var.sh +++ b/t/t0007-git-var.sh @@ -17,7 +17,7 @@ test_expect_success 'get GIT_COMMITTER_IDENT' ' test_cmp expect actual ' -test_expect_success !FAIL_PREREQS,!AUTOIDENT 'requested identites are strict' ' +test_expect_success !FAIL_PREREQS,!AUTOIDENT 'requested identities are strict' ' ( sane_unset GIT_COMMITTER_NAME && sane_unset GIT_COMMITTER_EMAIL && diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index 1744cee5e9..370a389e5c 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -424,9 +424,24 @@ test_expect_success 'local ignore inside a sub-directory with --verbose' ' ) ' -test_expect_success_multi 'nested include' \ - 'a/b/.gitignore:8:!on* a/b/one' ' - test_check_ignore "a/b/one" +test_expect_success 'nested include of negated pattern' ' + expect "" && + test_check_ignore "a/b/one" 1 +' + +test_expect_success 'nested include of negated pattern with -q' ' + expect "" && + test_check_ignore "-q a/b/one" 1 +' + +test_expect_success 'nested include of negated pattern with -v' ' + expect "a/b/.gitignore:8:!on* a/b/one" && + test_check_ignore "-v a/b/one" 0 +' + +test_expect_success 'nested include of negated pattern with -v -n' ' + expect "a/b/.gitignore:8:!on* a/b/one" && + test_check_ignore "-v -n a/b/one" 0 ' ############################################################################ @@ -460,7 +475,6 @@ test_expect_success 'cd to ignored sub-directory' ' expect_from_stdin <<-\EOF && foo twoooo - ../one seven ../../one EOF @@ -543,7 +557,6 @@ test_expect_success 'global ignore' ' globalthree a/globalthree a/per-repo - globaltwo EOF test_check_ignore "globalone per-repo globalthree a/globalthree a/per-repo not-ignored globaltwo" ' @@ -586,17 +599,7 @@ EOF cat <<-\EOF >expected-default one a/one - a/b/on - a/b/one - a/b/one one - a/b/one two - "a/b/one\"three" - a/b/two a/b/twooo - globaltwo - a/globaltwo - a/b/globaltwo - b/globaltwo EOF cat <<-EOF >expected-verbose .gitignore:1:one one @@ -696,8 +699,12 @@ cat <<-EOF >expected-all $global_excludes:2:!globaltwo ../b/globaltwo :: c/not-ignored EOF +cat <<-EOF >expected-default +../one +one +b/twooo +EOF grep -v '^:: ' expected-all >expected-verbose -sed -e 's/.* //' expected-verbose >expected-default broken_c_unquote stdin >stdin0 diff --git a/t/t0014-alias.sh b/t/t0014-alias.sh index 2694c81afd..8d3d9144c0 100755 --- a/t/t0014-alias.sh +++ b/t/t0014-alias.sh @@ -38,8 +38,8 @@ test_expect_success 'looping aliases - internal execution' ' #' test_expect_success 'run-command formats empty args properly' ' - GIT_TRACE=1 git frotz a "" b " " c 2>&1 | - sed -ne "/run_command:/s/.*trace: run_command: //p" >actual && + test_must_fail env GIT_TRACE=1 git frotz a "" b " " c 2>actual.raw && + sed -ne "/run_command:/s/.*trace: run_command: //p" actual.raw >actual && echo "git-frotz a '\'''\'' b '\'' '\'' c" >expect && test_cmp expect actual ' diff --git a/t/t0018-advice.sh b/t/t0018-advice.sh new file mode 100755 index 0000000000..e03554d2f3 --- /dev/null +++ b/t/t0018-advice.sh @@ -0,0 +1,32 @@ +#!/bin/sh + +test_description='Test advise_if_enabled functionality' + +. ./test-lib.sh + +test_expect_success 'advice should be printed when config variable is unset' ' + cat >expect <<-\EOF && + hint: This is a piece of advice + hint: Disable this message with "git config advice.nestedTag false" + EOF + test-tool advise "This is a piece of advice" 2>actual && + test_i18ncmp expect actual +' + +test_expect_success 'advice should be printed when config variable is set to true' ' + cat >expect <<-\EOF && + hint: This is a piece of advice + hint: Disable this message with "git config advice.nestedTag false" + EOF + test_config advice.nestedTag true && + test-tool advise "This is a piece of advice" 2>actual && + test_i18ncmp expect actual +' + +test_expect_success 'advice should not be printed when config variable is set to false' ' + test_config advice.nestedTag false && + test-tool advise "This is a piece of advice" 2>actual && + test_must_be_empty actual +' + +test_done diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index 854da0ae16..b63ba62e5d 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -159,8 +159,8 @@ test_expect_success 'checkout with autocrlf=input' ' rm -f tmp one dir/two three && git config core.autocrlf input && git read-tree --reset -u HEAD && - test_must_fail has_cr one && - test_must_fail has_cr dir/two && + ! has_cr one && + ! has_cr dir/two && git update-index -- one dir/two && test "$one" = $(git hash-object --stdin <one) && test "$two" = $(git hash-object --stdin <dir/two) && @@ -237,9 +237,9 @@ test_expect_success '.gitattributes says two is binary' ' git config core.autocrlf true && git read-tree --reset -u HEAD && - test_must_fail has_cr dir/two && + ! has_cr dir/two && verbose has_cr one && - test_must_fail has_cr three + ! has_cr three ' test_expect_success '.gitattributes says two is input' ' @@ -248,7 +248,7 @@ test_expect_success '.gitattributes says two is input' ' echo "two crlf=input" >.gitattributes && git read-tree --reset -u HEAD && - test_must_fail has_cr dir/two + ! has_cr dir/two ' test_expect_success '.gitattributes says two and three are text' ' @@ -270,7 +270,7 @@ test_expect_success 'in-tree .gitattributes (1)' ' rm -rf tmp one dir .gitattributes patch.file three && git read-tree --reset -u HEAD && - test_must_fail has_cr one && + ! has_cr one && verbose has_cr three ' @@ -280,7 +280,7 @@ test_expect_success 'in-tree .gitattributes (2)' ' git read-tree --reset HEAD && git checkout-index -f -q -u -a && - test_must_fail has_cr one && + ! has_cr one && verbose has_cr three ' @@ -291,7 +291,7 @@ test_expect_success 'in-tree .gitattributes (3)' ' git checkout-index -u .gitattributes && git checkout-index -u one dir/two three && - test_must_fail has_cr one && + ! has_cr one && verbose has_cr three ' @@ -302,7 +302,7 @@ test_expect_success 'in-tree .gitattributes (4)' ' git checkout-index -u one dir/two three && git checkout-index -u .gitattributes && - test_must_fail has_cr one && + ! has_cr one && verbose has_cr three ' diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index c954c709ad..4bfffa9c31 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -35,7 +35,7 @@ filter_git () { # Compare two files and ensure that `clean` and `smudge` respectively are # called at least once if specified in the `expect` file. The actual # invocation count is not relevant because their number can vary. -# c.f. http://public-inbox.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ +# c.f. http://lore.kernel.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ test_cmp_count () { expect=$1 actual=$2 @@ -50,7 +50,7 @@ test_cmp_count () { # Compare two files but exclude all `clean` invocations because Git can # call `clean` zero or more times. -# c.f. http://public-inbox.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ +# c.f. http://lore.kernel.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ test_cmp_exclude_clean () { expect=$1 actual=$2 @@ -364,6 +364,10 @@ test_expect_success PERL 'required process filter should filter data' ' S=$(file_size test.r) && S2=$(file_size test2.r) && S3=$(file_size "testsubdir/test3 '\''sq'\'',\$x=.r") && + M=$(git hash-object test.r) && + M2=$(git hash-object test2.r) && + M3=$(git hash-object "testsubdir/test3 '\''sq'\'',\$x=.r") && + EMPTY=$(git hash-object /dev/null) && filter_git add . && cat >expected.log <<-EOF && @@ -378,14 +382,16 @@ test_expect_success PERL 'required process filter should filter data' ' test_cmp_count expected.log debug.log && git commit -m "test commit 2" && + MASTER=$(git rev-parse --verify master) && + META="ref=refs/heads/master treeish=$MASTER" && rm -f test2.r "testsubdir/test3 '\''sq'\'',\$x=.r" && filter_git checkout --quiet --no-progress . && cat >expected.log <<-EOF && START init handshake complete - IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] - IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $S3 [OK] -- OUT: $S3 . [OK] + IN: smudge test2.r blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -406,10 +412,10 @@ test_expect_success PERL 'required process filter should filter data' ' cat >expected.log <<-EOF && START init handshake complete - IN: smudge test.r $S [OK] -- OUT: $S . [OK] - IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] - IN: smudge test4-empty.r 0 [OK] -- OUT: 0 [OK] - IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $S3 [OK] -- OUT: $S3 . [OK] + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -420,6 +426,117 @@ test_expect_success PERL 'required process filter should filter data' ' ) ' +test_expect_success PERL 'required process filter should filter data for various subcommands' ' + test_config_global filter.protocol.process "rot13-filter.pl debug.log clean smudge" && + test_config_global filter.protocol.required true && + ( + cd repo && + + S=$(file_size test.r) && + S2=$(file_size test2.r) && + S3=$(file_size "testsubdir/test3 '\''sq'\'',\$x=.r") && + M=$(git hash-object test.r) && + M2=$(git hash-object test2.r) && + M3=$(git hash-object "testsubdir/test3 '\''sq'\'',\$x=.r") && + EMPTY=$(git hash-object /dev/null) && + + MASTER=$(git rev-parse --verify master) && + + cp "$TEST_ROOT/test.o" test5.r && + git add test5.r && + git commit -m "test commit 3" && + git checkout empty-branch && + filter_git rebase --onto empty-branch master^^ master && + MASTER2=$(git rev-parse --verify master) && + META="ref=refs/heads/master treeish=$MASTER2" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge test5.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + git reset --hard empty-branch && + filter_git reset --hard $MASTER && + META="treeish=$MASTER" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + git branch old-master $MASTER && + git reset --hard empty-branch && + filter_git reset --hard old-master && + META="ref=refs/heads/old-master treeish=$MASTER" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + git checkout -b merge empty-branch && + git branch -f master $MASTER2 && + filter_git merge master && + META="treeish=$MASTER2" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge test5.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + filter_git archive master >/dev/null && + META="ref=refs/heads/master treeish=$MASTER2" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge test5.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log && + + TREE="$(git rev-parse $MASTER2^{tree})" && + filter_git archive $TREE >/dev/null && + META="treeish=$TREE" && + cat >expected.log <<-EOF && + START + init handshake complete + IN: smudge test.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r $META blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test4-empty.r $META blob=$EMPTY 0 [OK] -- OUT: 0 [OK] + IN: smudge test5.r $META blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge testsubdir/test3 '\''sq'\'',\$x=.r $META blob=$M3 $S3 [OK] -- OUT: $S3 . [OK] + STOP + EOF + test_cmp_exclude_clean expected.log debug.log + ) +' + test_expect_success PERL 'required process filter takes precedence' ' test_config_global filter.protocol.clean false && test_config_global filter.protocol.process "rot13-filter.pl debug.log clean" && @@ -519,17 +636,22 @@ test_expect_success PERL 'required process filter should process multiple packet EOF test_cmp_count expected.log debug.log && - rm -f *.file && + M1="blob=$(git hash-object 1pkt_1__.file)" && + M2="blob=$(git hash-object 2pkt_1+1.file)" && + M3="blob=$(git hash-object 2pkt_2-1.file)" && + M4="blob=$(git hash-object 2pkt_2__.file)" && + M5="blob=$(git hash-object 3pkt_2+1.file)" && + rm -f *.file debug.log && filter_git checkout --quiet --no-progress -- *.file && cat >expected.log <<-EOF && START init handshake complete - IN: smudge 1pkt_1__.file $(($S )) [OK] -- OUT: $(($S )) . [OK] - IN: smudge 2pkt_1+1.file $(($S +1)) [OK] -- OUT: $(($S +1)) .. [OK] - IN: smudge 2pkt_2-1.file $(($S*2-1)) [OK] -- OUT: $(($S*2-1)) .. [OK] - IN: smudge 2pkt_2__.file $(($S*2 )) [OK] -- OUT: $(($S*2 )) .. [OK] - IN: smudge 3pkt_2+1.file $(($S*2+1)) [OK] -- OUT: $(($S*2+1)) ... [OK] + IN: smudge 1pkt_1__.file $M1 $(($S )) [OK] -- OUT: $(($S )) . [OK] + IN: smudge 2pkt_1+1.file $M2 $(($S +1)) [OK] -- OUT: $(($S +1)) .. [OK] + IN: smudge 2pkt_2-1.file $M3 $(($S*2-1)) [OK] -- OUT: $(($S*2-1)) .. [OK] + IN: smudge 2pkt_2__.file $M4 $(($S*2 )) [OK] -- OUT: $(($S*2 )) .. [OK] + IN: smudge 3pkt_2+1.file $M5 $(($S*2+1)) [OK] -- OUT: $(($S*2+1)) ... [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -578,6 +700,10 @@ test_expect_success PERL 'process filter should restart after unexpected write f S=$(file_size test.r) && S2=$(file_size test2.r) && SF=$(file_size smudge-write-fail.r) && + M=$(git hash-object test.r) && + M2=$(git hash-object test2.r) && + MF=$(git hash-object smudge-write-fail.r) && + rm -f debug.log && git add . && rm -f *.r && @@ -591,11 +717,11 @@ test_expect_success PERL 'process filter should restart after unexpected write f cat >expected.log <<-EOF && START init handshake complete - IN: smudge smudge-write-fail.r $SF [OK] -- [WRITE FAIL] + IN: smudge smudge-write-fail.r blob=$MF $SF [OK] -- [WRITE FAIL] START init handshake complete - IN: smudge test.r $S [OK] -- OUT: $S . [OK] - IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge test.r blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -629,6 +755,10 @@ test_expect_success PERL 'process filter should not be restarted if it signals a S=$(file_size test.r) && S2=$(file_size test2.r) && SE=$(file_size error.r) && + M=$(git hash-object test.r) && + M2=$(git hash-object test2.r) && + ME=$(git hash-object error.r) && + rm -f debug.log && git add . && rm -f *.r && @@ -637,9 +767,9 @@ test_expect_success PERL 'process filter should not be restarted if it signals a cat >expected.log <<-EOF && START init handshake complete - IN: smudge error.r $SE [OK] -- [ERROR] - IN: smudge test.r $S [OK] -- OUT: $S . [OK] - IN: smudge test2.r $S2 [OK] -- OUT: $S2 . [OK] + IN: smudge error.r blob=$ME $SE [OK] -- [ERROR] + IN: smudge test.r blob=$M $S [OK] -- OUT: $S . [OK] + IN: smudge test2.r blob=$M2 $S2 [OK] -- OUT: $S2 . [OK] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -665,18 +795,21 @@ test_expect_success PERL 'process filter abort stops processing of all further f echo "error this blob and all future blobs" >abort.o && cp abort.o abort.r && + M="blob=$(git hash-object abort.r)" && + rm -f debug.log && SA=$(file_size abort.r) && git add . && rm -f *.r && + # Note: This test assumes that Git filters files in alphabetical # order ("abort.r" before "test.r"). filter_git checkout --quiet --no-progress . && cat >expected.log <<-EOF && START init handshake complete - IN: smudge abort.r $SA [OK] -- [ABORT] + IN: smudge abort.r $M $SA [OK] -- [ABORT] STOP EOF test_cmp_exclude_clean expected.log debug.log && @@ -727,27 +860,29 @@ test_expect_success PERL 'delayed checkout in process filter' ' ) && S=$(file_size "$TEST_ROOT/test.o") && + PM="ref=refs/heads/master treeish=$(git -C repo rev-parse --verify master) " && + M="${PM}blob=$(git -C repo rev-parse --verify master:test.a)" && cat >a.exp <<-EOF && START init handshake complete - IN: smudge test.a $S [OK] -- OUT: $S . [OK] - IN: smudge test-delay10.a $S [OK] -- [DELAYED] - IN: smudge test-delay11.a $S [OK] -- [DELAYED] - IN: smudge test-delay20.a $S [OK] -- [DELAYED] + IN: smudge test.a $M $S [OK] -- OUT: $S . [OK] + IN: smudge test-delay10.a $M $S [OK] -- [DELAYED] + IN: smudge test-delay11.a $M $S [OK] -- [DELAYED] + IN: smudge test-delay20.a $M $S [OK] -- [DELAYED] IN: list_available_blobs test-delay10.a test-delay11.a [OK] - IN: smudge test-delay10.a 0 [OK] -- OUT: $S . [OK] - IN: smudge test-delay11.a 0 [OK] -- OUT: $S . [OK] + IN: smudge test-delay10.a $M 0 [OK] -- OUT: $S . [OK] + IN: smudge test-delay11.a $M 0 [OK] -- OUT: $S . [OK] IN: list_available_blobs test-delay20.a [OK] - IN: smudge test-delay20.a 0 [OK] -- OUT: $S . [OK] + IN: smudge test-delay20.a $M 0 [OK] -- OUT: $S . [OK] IN: list_available_blobs [OK] STOP EOF cat >b.exp <<-EOF && START init handshake complete - IN: smudge test-delay10.b $S [OK] -- [DELAYED] + IN: smudge test-delay10.b $M $S [OK] -- [DELAYED] IN: list_available_blobs test-delay10.b [OK] - IN: smudge test-delay10.b 0 [OK] -- OUT: $S . [OK] + IN: smudge test-delay10.b $M 0 [OK] -- OUT: $S . [OK] IN: list_available_blobs [OK] STOP EOF @@ -767,8 +902,11 @@ test_expect_success PERL 'delayed checkout in process filter' ' rm *.a *.b && filter_git checkout . && - test_cmp_count ../a.exp a.log && - test_cmp_count ../b.exp b.log && + # We are not checking out a ref here, so filter out ref metadata. + sed -e "s!$PM!!" ../a.exp >a.exp.filtered && + sed -e "s!$PM!!" ../b.exp >b.exp.filtered && + test_cmp_count a.exp.filtered a.log && + test_cmp_count b.exp.filtered b.log && test_cmp_committed_rot13 "$TEST_ROOT/test.o" test.a && test_cmp_committed_rot13 "$TEST_ROOT/test.o" test-delay10.a && @@ -795,7 +933,6 @@ test_expect_success PERL 'missing file in delayed checkout' ' rm -rf repo-cloned && test_must_fail git clone repo repo-cloned 2>git-stderr.log && - cat git-stderr.log && grep "error: .missing-delay\.a. was not filtered properly" git-stderr.log ' diff --git a/t/t0021/rot13-filter.pl b/t/t0021/rot13-filter.pl index 470107248e..cd32a82da5 100644 --- a/t/t0021/rot13-filter.pl +++ b/t/t0021/rot13-filter.pl @@ -135,7 +135,13 @@ while (1) { if ( exists $DELAY{$pathname} and $DELAY{$pathname}{"requested"} == 0 ) { $DELAY{$pathname}{"requested"} = 1; } + } elsif ($buffer =~ /^(ref|treeish|blob)=/) { + print $debug " $buffer"; } else { + # In general, filters need to be graceful about + # new metadata, since it's documented that we + # can pass any key-value pairs, but for tests, + # let's be a little stricter. die "Unknown message '$buffer'"; } diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh index 959b6da449..9fcd56fab3 100755 --- a/t/t0027-auto-crlf.sh +++ b/t/t0027-auto-crlf.sh @@ -215,7 +215,7 @@ stats_ascii () { } -# contruct the attr/ returned by git ls-files --eol +# construct the attr/ returned by git ls-files --eol # Take none (=empty), one or two args # convert.c: eol=XX overrides text=auto attr_ascii () { diff --git a/t/t0028-working-tree-encoding.sh b/t/t0028-working-tree-encoding.sh index 7aa0945d8d..bfc4fb9af5 100755 --- a/t/t0028-working-tree-encoding.sh +++ b/t/t0028-working-tree-encoding.sh @@ -17,7 +17,7 @@ test_lazy_prereq NO_UTF32_BOM ' write_utf16 () { if test_have_prereq NO_UTF16_BOM then - printf '\xfe\xff' + printf '\376\377' fi && iconv -f UTF-8 -t UTF-16 } @@ -25,7 +25,7 @@ write_utf16 () { write_utf32 () { if test_have_prereq NO_UTF32_BOM then - printf '\x00\x00\xfe\xff' + printf '\0\0\376\377' fi && iconv -f UTF-8 -t UTF-32 } diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index 705a136ed9..f8178ee4e3 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -23,6 +23,8 @@ usage: test-tool parse-options <options> -j <n> get a integer, too -m, --magnitude <n> get a magnitude --set23 set integer to 23 + --mode1 set integer to 1 (cmdmode option) + --mode2 set integer to 2 (cmdmode option) -L, --length <str> get length of <str> -F, --file <file> set file to <file> @@ -52,7 +54,7 @@ Alias -A, --alias-source <string> get a string -Z, --alias-target <string> - get a string + alias of --alias-source EOF @@ -242,7 +244,7 @@ test_expect_success 'Alias options do not contribute to abbreviation' ' ' cat >typo.err <<\EOF -error: did you mean `--boolean` (with two dashes ?) +error: did you mean `--boolean` (with two dashes)? EOF test_expect_success 'detect possible typos' ' @@ -252,7 +254,7 @@ test_expect_success 'detect possible typos' ' ' cat >typo.err <<\EOF -error: did you mean `--ambiguous` (with two dashes ?) +error: did you mean `--ambiguous` (with two dashes)? EOF test_expect_success 'detect possible typos' ' @@ -324,6 +326,22 @@ test_expect_success 'OPT_NEGBIT() works' ' test-tool parse-options --expect="boolean: 6" -bb --no-neg-or4 ' +test_expect_success 'OPT_CMDMODE() works' ' + test-tool parse-options --expect="integer: 1" --mode1 +' + +test_expect_success 'OPT_CMDMODE() detects incompatibility' ' + test_must_fail test-tool parse-options --mode1 --mode2 >output 2>output.err && + test_must_be_empty output && + test_i18ngrep "incompatible with --mode" output.err +' + +test_expect_success 'OPT_CMDMODE() detects incompatibility with something else' ' + test_must_fail test-tool parse-options --set23 --mode2 >output 2>output.err && + test_must_be_empty output && + test_i18ngrep "incompatible with something else" output.err +' + test_expect_success 'OPT_COUNTUP() with PARSE_OPT_NODASH works' ' test-tool parse-options --expect="boolean: 6" + + + + + + ' diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index c7b53e494b..56db5c8aba 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -165,6 +165,15 @@ test_expect_success 'absolute path rejects the empty string' ' test_must_fail test-tool path-utils absolute_path "" ' +test_expect_success MINGW '<drive-letter>:\\abc is an absolute path' ' + for letter in : \" C Z 1 ä + do + path=$letter:\\abc && + absolute="$(test-tool path-utils absolute_path "$path")" && + test "$path" = "$absolute" || return 1 + done +' + test_expect_success 'real path rejects the empty string' ' test_must_fail test-tool path-utils real_path "" ' @@ -285,9 +294,13 @@ test_git_path GIT_OBJECT_DIRECTORY=foo objects/foo foo/foo test_git_path GIT_OBJECT_DIRECTORY=foo objects2 .git/objects2 test_expect_success 'setup common repository' 'git --git-dir=bar init' test_git_path GIT_COMMON_DIR=bar index .git/index +test_git_path GIT_COMMON_DIR=bar index.lock .git/index.lock test_git_path GIT_COMMON_DIR=bar HEAD .git/HEAD test_git_path GIT_COMMON_DIR=bar logs/HEAD .git/logs/HEAD +test_git_path GIT_COMMON_DIR=bar logs/HEAD.lock .git/logs/HEAD.lock test_git_path GIT_COMMON_DIR=bar logs/refs/bisect/foo .git/logs/refs/bisect/foo +test_git_path GIT_COMMON_DIR=bar logs/refs bar/logs/refs +test_git_path GIT_COMMON_DIR=bar logs/refs/ bar/logs/refs/ test_git_path GIT_COMMON_DIR=bar logs/refs/bisec/foo bar/logs/refs/bisec/foo test_git_path GIT_COMMON_DIR=bar logs/refs/bisec bar/logs/refs/bisec test_git_path GIT_COMMON_DIR=bar logs/refs/bisectfoo bar/logs/refs/bisectfoo @@ -423,6 +436,9 @@ test_expect_success 'match .gitmodules' ' ~1000000 \ ~9999999 \ \ + .gitmodules:\$DATA \ + "gitmod~4 . :\$DATA" \ + \ --not \ ".gitmodules x" \ ".gitmodules .x" \ @@ -447,7 +463,36 @@ test_expect_success 'match .gitmodules' ' \ GI7EB~1 \ GI7EB~01 \ - GI7EB~1X + GI7EB~1X \ + \ + .gitmodules,:\$DATA +' + +test_expect_success MINGW 'is_valid_path() on Windows' ' + test-tool path-utils is_valid_path \ + win32 \ + "win32 x" \ + ../hello.txt \ + C:\\git \ + comm \ + conout.c \ + com0.c \ + lptN \ + \ + --not \ + "win32 " \ + "win32 /x " \ + "win32." \ + "win32 . ." \ + .../hello.txt \ + colon:test \ + "AUX.c" \ + "abc/conOut\$ .xyz/test" \ + lpt8 \ + com9.c \ + "lpt*" \ + Nul \ + "PRN./abc" ' test_done diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index 17c9c0f3bb..7d599675e3 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -12,6 +12,10 @@ cat >hello-script <<-EOF cat hello-script EOF +test_expect_success MINGW 'subprocess inherits only std handles' ' + test-tool run-command inherited-handle +' + test_expect_success 'start_command reports ENOENT (slash)' ' test-tool run-command start-command-ENOENT ./does-not-exist 2>err && test_i18ngrep "\./does-not-exist" err diff --git a/t/t0064-sha1-array.sh b/t/t0064-sha1-array.sh index 5dda570b9a..45685af2fd 100755 --- a/t/t0064-sha1-array.sh +++ b/t/t0064-sha1-array.sh @@ -18,7 +18,7 @@ test_expect_success 'ordered enumeration' ' { echoid append 88 44 aa 55 && echo for_each_unique - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && test_cmp expect actual ' @@ -28,7 +28,7 @@ test_expect_success 'ordered enumeration with duplicate suppression' ' echoid append 88 44 aa 55 && echoid append 88 44 aa 55 && echo for_each_unique - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && test_cmp expect actual ' @@ -36,7 +36,7 @@ test_expect_success 'lookup' ' { echoid append 88 44 aa 55 && echoid lookup 55 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -eq 1 ' @@ -45,7 +45,7 @@ test_expect_success 'lookup non-existing entry' ' { echoid append 88 44 aa 55 && echoid lookup 33 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -lt 0 ' @@ -55,7 +55,7 @@ test_expect_success 'lookup with duplicates' ' echoid append 88 44 aa 55 && echoid append 88 44 aa 55 && echoid lookup 55 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -ge 2 && test "$n" -le 3 @@ -66,7 +66,7 @@ test_expect_success 'lookup non-existing entry with duplicates' ' echoid append 88 44 aa 55 && echoid append 88 44 aa 55 && echoid lookup 66 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -lt 0 ' @@ -81,7 +81,7 @@ test_expect_success 'lookup with almost duplicate values' ' echo "append $id1" && echo "append $id2" && echoid lookup 55 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -eq 0 ' @@ -90,7 +90,7 @@ test_expect_success 'lookup with single duplicate value' ' { echoid append 55 55 && echoid lookup 55 - } | test-tool sha1-array >actual && + } | test-tool oid-array >actual && n=$(cat actual) && test "$n" -ge 0 && test "$n" -le 1 diff --git a/t/t0067-parse_pathspec_file.sh b/t/t0067-parse_pathspec_file.sh new file mode 100755 index 0000000000..7bab49f361 --- /dev/null +++ b/t/t0067-parse_pathspec_file.sh @@ -0,0 +1,108 @@ +#!/bin/sh + +test_description='Test parse_pathspec_file()' + +. ./test-lib.sh + +test_expect_success 'one item from stdin' ' + cat >expect <<-\EOF && + fileA.t + EOF + + echo fileA.t | + test-tool parse-pathspec-file --pathspec-from-file=- >actual && + + test_cmp expect actual +' + +test_expect_success 'one item from file' ' + cat >expect <<-\EOF && + fileA.t + EOF + + echo fileA.t >list && + test-tool parse-pathspec-file --pathspec-from-file=list >actual && + + test_cmp expect actual +' + +test_expect_success 'NUL delimiters' ' + cat >expect <<-\EOF && + fileA.t + fileB.t + EOF + + printf "fileA.t\0fileB.t\0" | + test-tool parse-pathspec-file --pathspec-from-file=- --pathspec-file-nul >actual && + + test_cmp expect actual +' + +test_expect_success 'LF delimiters' ' + cat >expect <<-\EOF && + fileA.t + fileB.t + EOF + + printf "fileA.t\nfileB.t\n" | + test-tool parse-pathspec-file --pathspec-from-file=- >actual && + + test_cmp expect actual +' + +test_expect_success 'no trailing delimiter' ' + cat >expect <<-\EOF && + fileA.t + fileB.t + EOF + + printf "fileA.t\nfileB.t" | + test-tool parse-pathspec-file --pathspec-from-file=- >actual && + + test_cmp expect actual +' + +test_expect_success 'CRLF delimiters' ' + cat >expect <<-\EOF && + fileA.t + fileB.t + EOF + + printf "fileA.t\r\nfileB.t\r\n" | + test-tool parse-pathspec-file --pathspec-from-file=- >actual && + + test_cmp expect actual +' + +test_expect_success 'quotes' ' + cat >expect <<-\EOF && + fileA.t + EOF + + cat >list <<-\EOF && + "file\101.t" + EOF + + test-tool parse-pathspec-file --pathspec-from-file=list >actual && + + test_cmp expect actual +' + +test_expect_success '--pathspec-file-nul takes quotes literally' ' + # Note: there is an extra newline because --pathspec-file-nul takes + # input \n literally, too + cat >expect <<-\EOF && + "file\101.t" + + EOF + + cat >list <<-\EOF && + "file\101.t" + EOF + + test-tool parse-pathspec-file --pathspec-from-file=list --pathspec-file-nul >actual && + + test_cmp expect actual +' + +test_done diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh index ce9a4a5f32..5a633690bf 100755 --- a/t/t0090-cache-tree.sh +++ b/t/t0090-cache-tree.sh @@ -21,9 +21,10 @@ generate_expected_cache_tree_rec () { parent="$2" && # ls-files might have foo/bar, foo/bar/baz, and foo/bar/quux # We want to count only foo because it's the only direct child - subtrees=$(git ls-files|grep /|cut -d / -f 1|uniq) && + git ls-files >files && + subtrees=$(grep / files|cut -d / -f 1|uniq) && subtree_count=$(echo "$subtrees"|awk -v c=0 '$1 != "" {++c} END {print c}') && - entries=$(git ls-files|wc -l) && + entries=$(wc -l <files) && printf "SHA $dir (%d entries, %d subtrees)\n" "$entries" "$subtree_count" && for subtree in $subtrees do diff --git a/t/t0091-bugreport.sh b/t/t0091-bugreport.sh new file mode 100755 index 0000000000..526304ff95 --- /dev/null +++ b/t/t0091-bugreport.sh @@ -0,0 +1,76 @@ +#!/bin/sh + +test_description='git bugreport' + +. ./test-lib.sh + +# Headers "[System Info]" will be followed by a non-empty line if we put some +# information there; we can make sure all our headers were followed by some +# information to check if the command was successful. +HEADER_PATTERN="^\[.*\]$" + +check_all_headers_populated () { + while read -r line + do + if test "$(grep "$HEADER_PATTERN" "$line")" + then + echo "$line" + read -r nextline + if test -z "$nextline"; then + return 1; + fi + fi + done +} + +test_expect_success 'creates a report with content in the right places' ' + test_when_finished rm git-bugreport-check-headers.txt && + git bugreport -s check-headers && + check_all_headers_populated <git-bugreport-check-headers.txt +' + +test_expect_success 'dies if file with same name as report already exists' ' + test_when_finished rm git-bugreport-duplicate.txt && + >>git-bugreport-duplicate.txt && + test_must_fail git bugreport --suffix duplicate +' + +test_expect_success '--output-directory puts the report in the provided dir' ' + test_when_finished rm -fr foo/ && + git bugreport -o foo/ && + test_path_is_file foo/git-bugreport-* +' + +test_expect_success 'incorrect arguments abort with usage' ' + test_must_fail git bugreport --false 2>output && + test_i18ngrep usage output && + test_path_is_missing git-bugreport-* +' + +test_expect_success 'runs outside of a git dir' ' + test_when_finished rm non-repo/git-bugreport-* && + nongit git bugreport +' + +test_expect_success 'can create leading directories outside of a git dir' ' + test_when_finished rm -fr foo/bar/baz && + nongit git bugreport -o foo/bar/baz +' + +test_expect_success 'indicates populated hooks' ' + test_when_finished rm git-bugreport-hooks.txt && + test_when_finished rm -fr .git/hooks && + rm -fr .git/hooks && + mkdir .git/hooks && + for hook in applypatch-msg prepare-commit-msg.sample + do + write_script ".git/hooks/$hook" <<-EOF || return 1 + echo "hook $hook exists" + EOF + done && + git bugreport -s hooks && + grep applypatch-msg git-bugreport-hooks.txt && + ! grep prepare-commit-msg git-bugreport-hooks.txt +' + +test_done diff --git a/t/t0095-bloom.sh b/t/t0095-bloom.sh new file mode 100755 index 0000000000..232ba2c485 --- /dev/null +++ b/t/t0095-bloom.sh @@ -0,0 +1,117 @@ +#!/bin/sh + +test_description='Testing the various Bloom filter computations in bloom.c' +. ./test-lib.sh + +test_expect_success 'compute unseeded murmur3 hash for empty string' ' + cat >expect <<-\EOF && + Murmur3 Hash with seed=0:0x00000000 + EOF + test-tool bloom get_murmur3 "" >actual && + test_cmp expect actual +' + +test_expect_success 'compute unseeded murmur3 hash for test string 1' ' + cat >expect <<-\EOF && + Murmur3 Hash with seed=0:0x627b0c2c + EOF + test-tool bloom get_murmur3 "Hello world!" >actual && + test_cmp expect actual +' + +test_expect_success 'compute unseeded murmur3 hash for test string 2' ' + cat >expect <<-\EOF && + Murmur3 Hash with seed=0:0x2e4ff723 + EOF + test-tool bloom get_murmur3 "The quick brown fox jumps over the lazy dog" >actual && + test_cmp expect actual +' + +test_expect_success 'compute bloom key for empty string' ' + cat >expect <<-\EOF && + Hashes:0x5615800c|0x5b966560|0x61174ab4|0x66983008|0x6c19155c|0x7199fab0|0x771ae004| + Filter_Length:2 + Filter_Data:11|11| + EOF + test-tool bloom generate_filter "" >actual && + test_cmp expect actual +' + +test_expect_success 'compute bloom key for whitespace' ' + cat >expect <<-\EOF && + Hashes:0xf178874c|0x5f3d6eb6|0xcd025620|0x3ac73d8a|0xa88c24f4|0x16510c5e|0x8415f3c8| + Filter_Length:2 + Filter_Data:51|55| + EOF + test-tool bloom generate_filter " " >actual && + test_cmp expect actual +' + +test_expect_success 'compute bloom key for test string 1' ' + cat >expect <<-\EOF && + Hashes:0xb270de9b|0x1bb6f26e|0x84fd0641|0xee431a14|0x57892de7|0xc0cf41ba|0x2a15558d| + Filter_Length:2 + Filter_Data:92|6c| + EOF + test-tool bloom generate_filter "Hello world!" >actual && + test_cmp expect actual +' + +test_expect_success 'compute bloom key for test string 2' ' + cat >expect <<-\EOF && + Hashes:0x20ab385b|0xf5237fe2|0xc99bc769|0x9e140ef0|0x728c5677|0x47049dfe|0x1b7ce585| + Filter_Length:2 + Filter_Data:a5|4a| + EOF + test-tool bloom generate_filter "file.txt" >actual && + test_cmp expect actual +' + +test_expect_success 'get bloom filters for commit with no changes' ' + git init && + git commit --allow-empty -m "c0" && + cat >expect <<-\EOF && + Filter_Length:0 + Filter_Data: + EOF + test-tool bloom get_filter_for_commit "$(git rev-parse HEAD)" >actual && + test_cmp expect actual +' + +test_expect_success 'get bloom filter for commit with 10 changes' ' + rm actual && + rm expect && + mkdir smallDir && + for i in $(test_seq 0 9) + do + echo $i >smallDir/$i + done && + git add smallDir && + git commit -m "commit with 10 changes" && + cat >expect <<-\EOF && + Filter_Length:14 + Filter_Data:02|b3|c4|a0|34|e7|fe|eb|cb|47|fe|a0|e8|72| + EOF + test-tool bloom get_filter_for_commit "$(git rev-parse HEAD)" >actual && + test_cmp expect actual +' + +test_expect_success EXPENSIVE 'get bloom filter for commit with 513 changes' ' + rm actual && + rm expect && + mkdir bigDir && + for i in $(test_seq 0 511) + do + echo $i >bigDir/$i + done && + git add bigDir && + git commit -m "commit with 513 changes" && + cat >expect <<-\EOF && + Filter_Length:0 + Filter_Data: + EOF + test-tool bloom get_filter_for_commit "$(git rev-parse HEAD)" >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t0212-trace2-event.sh b/t/t0212-trace2-event.sh index 7065a1b937..1529155cf0 100755 --- a/t/t0212-trace2-event.sh +++ b/t/t0212-trace2-event.sh @@ -199,6 +199,43 @@ test_expect_success JSON_PP 'event stream, list config' ' test_cmp expect actual ' +# Test listing of all "interesting" environment variables. + +test_expect_success JSON_PP 'event stream, list env vars' ' + test_when_finished "rm trace.event actual expect" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" \ + GIT_TRACE2_ENV_VARS="A_VAR,OTHER_VAR,MISSING" \ + A_VAR=1 OTHER_VAR="hello world" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "001return", + | "0" + | ], + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "params":[ + | { + | "param":"A_VAR", + | "value":"1" + | }, + | { + | "param":"OTHER_VAR", + | "value":"hello world" + | } + | ], + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + test_expect_success JSON_PP 'basic trace2_data' ' test_when_finished "rm trace.event actual expect" && GIT_TRACE2_EVENT="$(pwd)/trace.event" test-tool trace2 006data test_category k1 v1 test_category k2 v2 && diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index 82eaaea0f4..bc2d74098f 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -22,6 +22,11 @@ test_expect_success 'setup helper scripts' ' exit 0 EOF + write_script git-credential-quit <<-\EOF && + . ./dump + echo quit=1 + EOF + write_script git-credential-verbatim <<-\EOF && user=$1; shift pass=$1; shift @@ -35,43 +40,71 @@ test_expect_success 'setup helper scripts' ' test_expect_success 'credential_fill invokes helper' ' check fill "verbatim foo bar" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=foo password=bar -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com EOF ' test_expect_success 'credential_fill invokes multiple helpers' ' check fill useless "verbatim foo bar" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=foo password=bar -- useless: get + useless: protocol=http + useless: host=example.com verbatim: get + verbatim: protocol=http + verbatim: host=example.com EOF ' test_expect_success 'credential_fill stops when we get a full response' ' check fill "verbatim one two" "verbatim three four" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=one password=two -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com EOF ' test_expect_success 'credential_fill continues through partial response' ' check fill "verbatim one \"\"" "verbatim two three" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=two password=three -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com verbatim: get + verbatim: protocol=http + verbatim: host=example.com verbatim: username=one EOF ' @@ -97,14 +130,20 @@ test_expect_success 'credential_fill passes along metadata' ' test_expect_success 'credential_approve calls all helpers' ' check approve useless "verbatim one two" <<-\EOF + protocol=http + host=example.com username=foo password=bar -- -- useless: store + useless: protocol=http + useless: host=example.com useless: username=foo useless: password=bar verbatim: store + verbatim: protocol=http + verbatim: host=example.com verbatim: username=foo verbatim: password=bar EOF @@ -112,6 +151,8 @@ test_expect_success 'credential_approve calls all helpers' ' test_expect_success 'do not bother storing password-less credential' ' check approve useless <<-\EOF + protocol=http + host=example.com username=foo -- -- @@ -121,14 +162,20 @@ test_expect_success 'do not bother storing password-less credential' ' test_expect_success 'credential_reject calls all helpers' ' check reject useless "verbatim one two" <<-\EOF + protocol=http + host=example.com username=foo password=bar -- -- useless: erase + useless: protocol=http + useless: host=example.com useless: username=foo useless: password=bar verbatim: erase + verbatim: protocol=http + verbatim: host=example.com verbatim: username=foo verbatim: password=bar EOF @@ -136,33 +183,49 @@ test_expect_success 'credential_reject calls all helpers' ' test_expect_success 'usernames can be preserved' ' check fill "verbatim \"\" three" <<-\EOF + protocol=http + host=example.com username=one -- + protocol=http + host=example.com username=one password=three -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com verbatim: username=one EOF ' test_expect_success 'usernames can be overridden' ' check fill "verbatim two three" <<-\EOF + protocol=http + host=example.com username=one -- + protocol=http + host=example.com username=two password=three -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com verbatim: username=one EOF ' test_expect_success 'do not bother completing already-full credential' ' check fill "verbatim three four" <<-\EOF + protocol=http + host=example.com username=one password=two -- + protocol=http + host=example.com username=one password=two -- @@ -174,23 +237,31 @@ test_expect_success 'do not bother completing already-full credential' ' # askpass helper is run, we know the internal getpass is working. test_expect_success 'empty helper list falls back to internal getpass' ' check fill <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=askpass-username password=askpass-password -- - askpass: Username: - askpass: Password: + askpass: Username for '\''http://example.com'\'': + askpass: Password for '\''http://askpass-username@example.com'\'': EOF ' test_expect_success 'internal getpass does not ask for known username' ' check fill <<-\EOF + protocol=http + host=example.com username=foo -- + protocol=http + host=example.com username=foo password=askpass-password -- - askpass: Password: + askpass: Password for '\''http://foo@example.com'\'': EOF ' @@ -202,7 +273,11 @@ HELPER="!f() { test_expect_success 'respect configured credentials' ' test_config credential.helper "$HELPER" && check fill <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=foo password=bar -- @@ -240,6 +315,102 @@ test_expect_success 'do not match configured credential' ' EOF ' +test_expect_success 'match multiple configured helpers' ' + test_config credential.helper "verbatim \"\" \"\"" && + test_config credential.https://example.com.helper "$HELPER" && + check fill <<-\EOF + protocol=https + host=example.com + path=repo.git + -- + protocol=https + host=example.com + username=foo + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + EOF +' + +test_expect_success 'match multiple configured helpers with URLs' ' + test_config credential.https://example.com/repo.git.helper "verbatim \"\" \"\"" && + test_config credential.https://example.com.helper "$HELPER" && + check fill <<-\EOF + protocol=https + host=example.com + path=repo.git + -- + protocol=https + host=example.com + username=foo + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + EOF +' + +test_expect_success 'match percent-encoded values' ' + test_config credential.https://example.com/%2566.git.helper "$HELPER" && + check fill <<-\EOF + url=https://example.com/%2566.git + -- + protocol=https + host=example.com + username=foo + password=bar + -- + EOF +' + +test_expect_success 'match percent-encoded UTF-8 values in path' ' + test_config credential.https://example.com.useHttpPath true && + test_config credential.https://example.com/perú.git.helper "$HELPER" && + check fill <<-\EOF + url=https://example.com/per%C3%BA.git + -- + protocol=https + host=example.com + path=perú.git + username=foo + password=bar + -- + EOF +' + +test_expect_success 'match percent-encoded values in username' ' + test_config credential.https://user%2fname@example.com/foo/bar.git.helper "$HELPER" && + check fill <<-\EOF + url=https://user%2fname@example.com/foo/bar.git + -- + protocol=https + host=example.com + username=foo + password=bar + -- + EOF +' + +test_expect_success 'fetch with multiple path components' ' + test_unconfig credential.helper && + test_config credential.https://example.com/foo/repo.git.helper "verbatim foo bar" && + check fill <<-\EOF + url=https://example.com/foo/repo.git + -- + protocol=https + host=example.com + username=foo + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + EOF +' + test_expect_success 'pull username from config' ' test_config credential.https://example.com.username foo && check fill <<-\EOF @@ -255,6 +426,63 @@ test_expect_success 'pull username from config' ' EOF ' +test_expect_success 'honors username from URL over helper (URL)' ' + test_config credential.https://example.com.username bob && + test_config credential.https://example.com.helper "verbatim \"\" bar" && + check fill <<-\EOF + url=https://alice@example.com + -- + protocol=https + host=example.com + username=alice + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + verbatim: username=alice + EOF +' + +test_expect_success 'honors username from URL over helper (components)' ' + test_config credential.https://example.com.username bob && + test_config credential.https://example.com.helper "verbatim \"\" bar" && + check fill <<-\EOF + protocol=https + host=example.com + username=alice + -- + protocol=https + host=example.com + username=alice + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + verbatim: username=alice + EOF +' + +test_expect_success 'last matching username wins' ' + test_config credential.https://example.com/path.git.username bob && + test_config credential.https://example.com.username alice && + test_config credential.https://example.com.helper "verbatim \"\" bar" && + check fill <<-\EOF + url=https://example.com/path.git + -- + protocol=https + host=example.com + username=alice + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + verbatim: username=alice + EOF +' + test_expect_success 'http paths can be part of context' ' check fill "verbatim foo bar" <<-\EOF && protocol=https @@ -289,23 +517,179 @@ test_expect_success 'http paths can be part of context' ' EOF ' +test_expect_success 'context uses urlmatch' ' + test_config "credential.https://*.org.useHttpPath" true && + check fill "verbatim foo bar" <<-\EOF + protocol=https + host=example.org + path=foo.git + -- + protocol=https + host=example.org + path=foo.git + username=foo + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.org + verbatim: path=foo.git + EOF +' + test_expect_success 'helpers can abort the process' ' test_must_fail git \ - -c credential.helper="!f() { echo quit=1; }; f" \ + -c credential.helper=quit \ -c credential.helper="verbatim foo bar" \ - credential fill >stdout && - test_must_be_empty stdout + credential fill >stdout 2>stderr <<-\EOF && + protocol=http + host=example.com + EOF + test_must_be_empty stdout && + cat >expect <<-\EOF && + quit: get + quit: protocol=http + quit: host=example.com + fatal: credential helper '\''quit'\'' told us to quit + EOF + test_i18ncmp expect stderr ' test_expect_success 'empty helper spec resets helper list' ' test_config credential.helper "verbatim file file" && check fill "" "verbatim cmdline cmdline" <<-\EOF + protocol=http + host=example.com -- + protocol=http + host=example.com username=cmdline password=cmdline -- verbatim: get + verbatim: protocol=http + verbatim: host=example.com + EOF +' + +test_expect_success 'url parser rejects embedded newlines' ' + test_must_fail git credential fill 2>stderr <<-\EOF && + url=https://one.example.com?%0ahost=two.example.com/ + EOF + cat >expect <<-\EOF && + warning: url contains a newline in its path component: https://one.example.com?%0ahost=two.example.com/ + fatal: credential url cannot be parsed: https://one.example.com?%0ahost=two.example.com/ + EOF + test_i18ncmp expect stderr +' + +test_expect_success 'host-less URLs are parsed as empty host' ' + check fill "verbatim foo bar" <<-\EOF + url=cert:///path/to/cert.pem + -- + protocol=cert + host= + path=path/to/cert.pem + username=foo + password=bar + -- + verbatim: get + verbatim: protocol=cert + verbatim: host= + verbatim: path=path/to/cert.pem EOF ' +test_expect_success 'credential system refuses to work with missing host' ' + test_must_fail git credential fill 2>stderr <<-\EOF && + protocol=http + EOF + cat >expect <<-\EOF && + fatal: refusing to work with credential missing host field + EOF + test_i18ncmp expect stderr +' + +test_expect_success 'credential system refuses to work with missing protocol' ' + test_must_fail git credential fill 2>stderr <<-\EOF && + host=example.com + EOF + cat >expect <<-\EOF && + fatal: refusing to work with credential missing protocol field + EOF + test_i18ncmp expect stderr +' + +# usage: check_host_and_path <url> <expected-host> <expected-path> +check_host_and_path () { + # we always parse the path component, but we need this to make sure it + # is passed to the helper + test_config credential.useHTTPPath true && + check fill "verbatim user pass" <<-EOF + url=$1 + -- + protocol=https + host=$2 + path=$3 + username=user + password=pass + -- + verbatim: get + verbatim: protocol=https + verbatim: host=$2 + verbatim: path=$3 + EOF +} + +test_expect_success 'url parser handles bare query marker' ' + check_host_and_path https://example.com?foo.git example.com ?foo.git +' + +test_expect_success 'url parser handles bare fragment marker' ' + check_host_and_path https://example.com#foo.git example.com "#foo.git" +' + +test_expect_success 'url parser not confused by encoded markers' ' + check_host_and_path https://example.com%23%3f%2f/foo.git \ + "example.com#?/" foo.git +' + +test_expect_success 'credential config with partial URLs' ' + echo "echo password=yep" | write_script git-credential-yep && + test_write_lines url=https://user@example.com/repo.git >stdin && + for partial in \ + example.com \ + user@example.com \ + https:// \ + https://example.com \ + https://example.com/ \ + https://user@example.com \ + https://user@example.com/ \ + https://example.com/repo.git \ + https://user@example.com/repo.git \ + /repo.git + do + git -c credential.$partial.helper=yep \ + credential fill <stdin >stdout && + grep yep stdout || + return 1 + done && + + for partial in \ + dont.use.this \ + http:// \ + /repo + do + git -c credential.$partial.helper=yep \ + credential fill <stdin >stdout && + ! grep yep stdout || + return 1 + done && + + git -c credential.$partial.helper=yep \ + -c credential.with%0anewline.username=uh-oh \ + credential fill <stdin >stdout 2>stderr && + test_i18ngrep "skipping credential lookup for key" stderr +' + test_done diff --git a/t/t0302-credential-store.sh b/t/t0302-credential-store.sh index d6b54e8c65..716bf1af9f 100755 --- a/t/t0302-credential-store.sh +++ b/t/t0302-credential-store.sh @@ -107,7 +107,6 @@ test_expect_success 'store: if both xdg and home files exist, only store in home test_must_be_empty "$HOME/.config/git/credentials" ' - test_expect_success 'erase: erase matching credentials from both xdg and home files' ' echo "https://home-user:home-pass@example.com" >"$HOME/.git-credentials" && mkdir -p "$HOME/.config/git" && @@ -120,4 +119,94 @@ test_expect_success 'erase: erase matching credentials from both xdg and home fi test_must_be_empty "$HOME/.config/git/credentials" ' +invalid_credential_test() { + test_expect_success "get: ignore credentials without $1 as invalid" ' + echo "$2" >"$HOME/.git-credentials" && + check fill store <<-\EOF + protocol=https + host=example.com + -- + protocol=https + host=example.com + username=askpass-username + password=askpass-password + -- + askpass: Username for '\''https://example.com'\'': + askpass: Password for '\''https://askpass-username@example.com'\'': + -- + EOF + ' +} + +invalid_credential_test "scheme" ://user:pass@example.com +invalid_credential_test "valid host/path" https://user:pass@ +invalid_credential_test "username/password" https://pass@example.com + +test_expect_success 'get: credentials with DOS line endings are invalid' ' + printf "https://user:pass@example.com\r\n" >"$HOME/.git-credentials" && + check fill store <<-\EOF + protocol=https + host=example.com + -- + protocol=https + host=example.com + username=askpass-username + password=askpass-password + -- + askpass: Username for '\''https://example.com'\'': + askpass: Password for '\''https://askpass-username@example.com'\'': + -- + EOF +' + +test_expect_success 'get: credentials with path and DOS line endings are valid' ' + printf "https://user:pass@example.com/repo.git\r\n" >"$HOME/.git-credentials" && + check fill store <<-\EOF + url=https://example.com/repo.git + -- + protocol=https + host=example.com + username=user + password=pass + -- + EOF +' + +test_expect_success 'get: credentials with DOS line endings are invalid if path is relevant' ' + printf "https://user:pass@example.com/repo.git\r\n" >"$HOME/.git-credentials" && + test_config credential.useHttpPath true && + check fill store <<-\EOF + url=https://example.com/repo.git + -- + protocol=https + host=example.com + path=repo.git + username=askpass-username + password=askpass-password + -- + askpass: Username for '\''https://example.com/repo.git'\'': + askpass: Password for '\''https://askpass-username@example.com/repo.git'\'': + -- + EOF +' + +test_expect_success 'get: store file can contain empty/bogus lines' ' + echo "" >"$HOME/.git-credentials" && + q_to_tab <<-\CREDENTIAL >>"$HOME/.git-credentials" && + #comment + Q + https://user:pass@example.com + CREDENTIAL + check fill store <<-\EOF + protocol=https + host=example.com + -- + protocol=https + host=example.com + username=user + password=pass + -- + EOF +' + test_done diff --git a/t/t0500-progress-display.sh b/t/t0500-progress-display.sh index 24ccbd8d3b..1ed1df351c 100755 --- a/t/t0500-progress-display.sh +++ b/t/t0500-progress-display.sh @@ -76,7 +76,7 @@ EOF ' test_expect_success 'progress display breaks long lines #2' ' - # Note: we dont need that many spaces after the title to cover up + # Note: we do not need that many spaces after the title to cover up # the last line before breaking the progress line. sed -e "s/Z$//" >expect <<\EOF && Working hard.......2.........3.........4.........5.........6: 0% (1/100000)<CR> @@ -104,7 +104,7 @@ EOF ' test_expect_success 'progress display breaks long lines #3 - even the first is too long' ' - # Note: we dont actually need any spaces at the end of the title + # Note: we do not actually need any spaces at the end of the title # line, because there is no previous progress line to cover up. sed -e "s/Z$//" >expect <<\EOF && Working hard.......2.........3.........4.........5.........6: Z @@ -283,4 +283,30 @@ test_expect_success 'cover up after throughput shortens a lot' ' test_i18ncmp expect out ' +test_expect_success 'progress generates traces' ' + cat >in <<-\EOF && + throughput 102400 1000 + update + progress 10 + throughput 204800 2000 + update + progress 20 + throughput 307200 3000 + update + progress 30 + throughput 409600 4000 + update + progress 40 + EOF + + GIT_TRACE2_EVENT="$(pwd)/trace.event" test-tool progress --total=40 \ + "Working hard" <in 2>stderr && + + # t0212/parse_events.perl intentionally omits regions and data. + grep -e "region_enter" -e "\"category\":\"progress\"" trace.event && + grep -e "region_leave" -e "\"category\":\"progress\"" trace.event && + grep "\"key\":\"total_objects\",\"value\":\"40\"" trace.event && + grep "\"key\":\"total_bytes\",\"value\":\"409600\"" trace.event +' + test_done diff --git a/t/t1011-read-tree-sparse-checkout.sh b/t/t1011-read-tree-sparse-checkout.sh index ba71b159ba..140f459977 100755 --- a/t/t1011-read-tree-sparse-checkout.sh +++ b/t/t1011-read-tree-sparse-checkout.sh @@ -74,13 +74,19 @@ test_expect_success 'read-tree --no-sparse-checkout with empty .git/info/sparse- test_expect_success 'read-tree with empty .git/info/sparse-checkout' ' git config core.sparsecheckout true && echo >.git/info/sparse-checkout && - read_tree_u_must_fail -m -u HEAD && + read_tree_u_must_succeed -m -u HEAD && git ls-files --stage >result && test_cmp expected result && git ls-files -t >result && + cat >expected.swt <<-\EOF && + S init.t + S sub/added + S sub/addedtoo + S subsub/added + EOF test_cmp expected.swt result && - test -f init.t && - test -f sub/added + ! test -f init.t && + ! test -f sub/added ' test_expect_success 'match directories with trailing slash' ' @@ -215,7 +221,6 @@ test_expect_success 'read-tree adds to worktree, dirty case' ' ' test_expect_success 'index removal and worktree narrowing at the same time' ' - >empty && echo init.t >.git/info/sparse-checkout && echo sub/added >>.git/info/sparse-checkout && git checkout -f top && @@ -223,7 +228,7 @@ test_expect_success 'index removal and worktree narrowing at the same time' ' git checkout removed && git ls-files sub/added >result && test ! -f sub/added && - test_cmp empty result + test_must_be_empty result ' test_expect_success 'read-tree --reset removes outside worktree' ' @@ -234,18 +239,19 @@ test_expect_success 'read-tree --reset removes outside worktree' ' test_must_be_empty result ' -test_expect_success 'print errors when failed to update worktree' ' +test_expect_success 'print warnings when some worktree updates disabled' ' echo sub >.git/info/sparse-checkout && git checkout -f init && mkdir sub && touch sub/added sub/addedtoo && - test_must_fail git checkout top 2>actual && + # Use -q to suppress "Previous HEAD position" and "Head is now at" msgs + git checkout -q top 2>actual && cat >expected <<\EOF && -error: The following untracked working tree files would be overwritten by checkout: +warning: The following paths were already present and thus not updated despite sparse patterns: sub/added sub/addedtoo -Please move or remove them before you switch branches. -Aborting + +After fixing the above paths, you may want to run `git sparse-checkout reapply`. EOF test_i18ncmp expected actual ' diff --git a/t/t1014-read-tree-confusing.sh b/t/t1014-read-tree-confusing.sh index 2f5a25d503..da3376b3bb 100755 --- a/t/t1014-read-tree-confusing.sh +++ b/t/t1014-read-tree-confusing.sh @@ -49,6 +49,7 @@ git~1 .git.SPACE .git.{space} .\\\\.GIT\\\\foobar backslashes .git\\\\foobar backslashes2 +.git...:alternate-stream EOF test_expect_success 'utf-8 paths allowed with core.protectHFS off' ' diff --git a/t/t1050-large.sh b/t/t1050-large.sh index dcb4dbba67..184b479a21 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -53,7 +53,8 @@ test_expect_success 'add a large file or two' ' for p in .git/objects/pack/pack-*.pack do count=$(( $count + 1 )) - if test -f "$p" && idx=${p%.pack}.idx && test -f "$idx" + if test_path_is_file "$p" && + idx=${p%.pack}.idx && test_path_is_file "$idx" then continue fi @@ -65,7 +66,7 @@ test_expect_success 'add a large file or two' ' test $cnt = 2 && for l in .git/objects/??/?????????????????????????????????????? do - test -f "$l" || continue + test_path_is_file "$l" || continue bad=t done && test -z "$bad" && @@ -76,7 +77,8 @@ test_expect_success 'add a large file or two' ' for p in .git/objects/pack/pack-*.pack do count=$(( $count + 1 )) - if test -f "$p" && idx=${p%.pack}.idx && test -f "$idx" + if test_path_is_file "$p" && + idx=${p%.pack}.idx && test_path_is_file "$idx" then continue fi @@ -111,7 +113,7 @@ test_expect_success 'packsize limit' ' count=0 && for pi in .git/objects/pack/pack-*.idx do - test -f "$pi" && count=$(( $count + 1 )) + test_path_is_file "$pi" && count=$(( $count + 1 )) done && test $count = 2 && @@ -194,15 +196,15 @@ test_expect_success 'pack-objects with large loose object' ' test_cmp huge actual ' -test_expect_success 'tar achiving' ' +test_expect_success 'tar archiving' ' git archive --format=tar HEAD >/dev/null ' -test_expect_success 'zip achiving, store only' ' +test_expect_success 'zip archiving, store only' ' git archive --format=zip -0 HEAD >/dev/null ' -test_expect_success 'zip achiving, deflate' ' +test_expect_success 'zip archiving, deflate' ' git archive --format=zip HEAD >/dev/null ' diff --git a/t/t1091-sparse-checkout-builtin.sh b/t/t1091-sparse-checkout-builtin.sh new file mode 100755 index 0000000000..88cdde255c --- /dev/null +++ b/t/t1091-sparse-checkout-builtin.sh @@ -0,0 +1,607 @@ +#!/bin/sh + +test_description='sparse checkout builtin tests' + +. ./test-lib.sh + +list_files() { + # Do not replace this with 'ls "$1"', as "ls" with BSD-lineage + # enables "-A" by default for root and ends up including ".git" and + # such in its output. (Note, though, that running the test suite as + # root is generally not recommended.) + (cd "$1" && printf '%s\n' *) +} + +check_files() { + list_files "$1" >actual && + shift && + printf "%s\n" $@ >expect && + test_cmp expect actual +} + +test_expect_success 'setup' ' + git init repo && + ( + cd repo && + echo "initial" >a && + mkdir folder1 folder2 deep && + mkdir deep/deeper1 deep/deeper2 && + mkdir deep/deeper1/deepest && + cp a folder1 && + cp a folder2 && + cp a deep && + cp a deep/deeper1 && + cp a deep/deeper2 && + cp a deep/deeper1/deepest && + git add . && + git commit -m "initial commit" + ) +' + +test_expect_success 'git sparse-checkout list (empty)' ' + git -C repo sparse-checkout list >list 2>err && + test_must_be_empty list && + test_i18ngrep "this worktree is not sparse (sparse-checkout file may not exist)" err +' + +test_expect_success 'git sparse-checkout list (populated)' ' + test_when_finished rm -f repo/.git/info/sparse-checkout && + cat >repo/.git/info/sparse-checkout <<-\EOF && + /folder1/* + /deep/ + **/a + !*bin* + EOF + cp repo/.git/info/sparse-checkout expect && + git -C repo sparse-checkout list >list && + test_cmp expect list +' + +test_expect_success 'git sparse-checkout init' ' + git -C repo sparse-checkout init && + cat >expect <<-\EOF && + /* + !/*/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + test_cmp_config -C repo true core.sparsecheckout && + check_files repo a +' + +test_expect_success 'git sparse-checkout list after init' ' + git -C repo sparse-checkout list >actual && + cat >expect <<-\EOF && + /* + !/*/ + EOF + test_cmp expect actual +' + +test_expect_success 'init with existing sparse-checkout' ' + echo "*folder*" >> repo/.git/info/sparse-checkout && + git -C repo sparse-checkout init && + cat >expect <<-\EOF && + /* + !/*/ + *folder* + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a folder1 folder2 +' + +test_expect_success 'clone --sparse' ' + git clone --sparse "file://$(pwd)/repo" clone && + git -C clone sparse-checkout list >actual && + cat >expect <<-\EOF && + /* + !/*/ + EOF + test_cmp expect actual && + check_files clone a +' + +test_expect_success 'set enables config' ' + git init empty-config && + ( + cd empty-config && + test_commit test file && + test_path_is_missing .git/config.worktree && + git sparse-checkout set nothing && + test_path_is_file .git/config.worktree && + test_cmp_config true core.sparseCheckout + ) +' + +test_expect_success 'set sparse-checkout using builtin' ' + git -C repo sparse-checkout set "/*" "!/*/" "*folder*" && + cat >expect <<-\EOF && + /* + !/*/ + *folder* + EOF + git -C repo sparse-checkout list >actual && + test_cmp expect actual && + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a folder1 folder2 +' + +test_expect_success 'set sparse-checkout using --stdin' ' + cat >expect <<-\EOF && + /* + !/*/ + /folder1/ + /folder2/ + EOF + git -C repo sparse-checkout set --stdin <expect && + git -C repo sparse-checkout list >actual && + test_cmp expect actual && + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo "a folder1 folder2" +' + +test_expect_success 'add to sparse-checkout' ' + cat repo/.git/info/sparse-checkout >expect && + cat >add <<-\EOF && + pattern1 + /folder1/ + pattern2 + EOF + cat add >>expect && + git -C repo sparse-checkout add --stdin <add && + git -C repo sparse-checkout list >actual && + test_cmp expect actual && + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo "a folder1 folder2" +' + +test_expect_success 'cone mode: match patterns' ' + git -C repo config --worktree core.sparseCheckoutCone true && + rm -rf repo/a repo/folder1 repo/folder2 && + git -C repo read-tree -mu HEAD 2>err && + test_i18ngrep ! "disabling cone patterns" err && + git -C repo reset --hard && + check_files repo a folder1 folder2 +' + +test_expect_success 'cone mode: warn on bad pattern' ' + test_when_finished mv sparse-checkout repo/.git/info/ && + cp repo/.git/info/sparse-checkout . && + echo "!/deep/deeper/*" >>repo/.git/info/sparse-checkout && + git -C repo read-tree -mu HEAD 2>err && + test_i18ngrep "unrecognized negative pattern" err +' + +test_expect_success 'sparse-checkout disable' ' + test_when_finished rm -rf repo/.git/info/sparse-checkout && + git -C repo sparse-checkout disable && + test_path_is_file repo/.git/info/sparse-checkout && + git -C repo config --list >config && + test_must_fail git config core.sparseCheckout && + check_files repo a deep folder1 folder2 +' + +test_expect_success 'cone mode: init and set' ' + git -C repo sparse-checkout init --cone && + git -C repo config --list >config && + test_i18ngrep "core.sparsecheckoutcone=true" config && + list_files repo >dir && + echo a >expect && + test_cmp expect dir && + git -C repo sparse-checkout set deep/deeper1/deepest/ 2>err && + test_must_be_empty err && + check_files repo a deep && + check_files repo/deep a deeper1 && + check_files repo/deep/deeper1 a deepest && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + !/deep/*/ + /deep/deeper1/ + !/deep/deeper1/*/ + /deep/deeper1/deepest/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + git -C repo sparse-checkout set --stdin 2>err <<-\EOF && + folder1 + folder2 + EOF + test_must_be_empty err && + check_files repo a folder1 folder2 +' + +test_expect_success 'cone mode: list' ' + cat >expect <<-\EOF && + folder1 + folder2 + EOF + git -C repo sparse-checkout set --stdin <expect && + git -C repo sparse-checkout list >actual 2>err && + test_must_be_empty err && + test_cmp expect actual +' + +test_expect_success 'cone mode: set with nested folders' ' + git -C repo sparse-checkout set deep deep/deeper1/deepest 2>err && + test_line_count = 0 err && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + EOF + test_cmp repo/.git/info/sparse-checkout expect +' + +test_expect_success 'cone mode: add independent path' ' + git -C repo sparse-checkout set deep/deeper1 && + git -C repo sparse-checkout add folder1 && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + !/deep/*/ + /deep/deeper1/ + /folder1/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep folder1 +' + +test_expect_success 'cone mode: add sibling path' ' + git -C repo sparse-checkout set deep/deeper1 && + git -C repo sparse-checkout add deep/deeper2 && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + !/deep/*/ + /deep/deeper1/ + /deep/deeper2/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep +' + +test_expect_success 'cone mode: add parent path' ' + git -C repo sparse-checkout set deep/deeper1 folder1 && + git -C repo sparse-checkout add deep && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + /folder1/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep folder1 +' + +test_expect_success 'not-up-to-date does not block rest of sparsification' ' + test_when_finished git -C repo sparse-checkout disable && + test_when_finished git -C repo reset --hard && + git -C repo sparse-checkout set deep && + + echo update >repo/deep/deeper2/a && + cp repo/.git/info/sparse-checkout expect && + test_write_lines "!/deep/*/" "/deep/deeper1/" >>expect && + + git -C repo sparse-checkout set deep/deeper1 2>err && + + test_i18ngrep "The following paths are not up to date" err && + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo/deep a deeper1 deeper2 && + check_files repo/deep/deeper1 a deepest && + check_files repo/deep/deeper1/deepest a && + check_files repo/deep/deeper2 a +' + +test_expect_success 'revert to old sparse-checkout on empty update' ' + git init empty-test && + ( + echo >file && + git add file && + git commit -m "test" && + git sparse-checkout set nothing 2>err && + test_i18ngrep ! "Sparse checkout leaves no entry on working directory" err && + test_i18ngrep ! ".git/index.lock" err && + git sparse-checkout set file + ) +' + +test_expect_success 'fail when lock is taken' ' + test_when_finished rm -rf repo/.git/info/sparse-checkout.lock && + touch repo/.git/info/sparse-checkout.lock && + test_must_fail git -C repo sparse-checkout set deep 2>err && + test_i18ngrep "Unable to create .*\.lock" err +' + +test_expect_success '.gitignore should not warn about cone mode' ' + git -C repo config --worktree core.sparseCheckoutCone true && + echo "**/bin/*" >repo/.gitignore && + git -C repo reset --hard 2>err && + test_i18ngrep ! "disabling cone patterns" err +' + +test_expect_success 'sparse-checkout (init|set|disable) warns with dirty status' ' + git clone repo dirty && + echo dirty >dirty/folder1/a && + + git -C dirty sparse-checkout init 2>err && + test_i18ngrep "warning.*The following paths are not up to date" err && + + git -C dirty sparse-checkout set /folder2/* /deep/deeper1/* 2>err && + test_i18ngrep "warning.*The following paths are not up to date" err && + test_path_is_file dirty/folder1/a && + + git -C dirty sparse-checkout disable 2>err && + test_must_be_empty err && + + git -C dirty reset --hard && + git -C dirty sparse-checkout init && + git -C dirty sparse-checkout set /folder2/* /deep/deeper1/* && + test_path_is_missing dirty/folder1/a && + git -C dirty sparse-checkout disable && + test_path_is_file dirty/folder1/a +' + +test_expect_success 'sparse-checkout (init|set|disable) warns with unmerged status' ' + git clone repo unmerged && + + cat >input <<-EOF && + 0 0000000000000000000000000000000000000000 folder1/a + 100644 $(git -C unmerged rev-parse HEAD:folder1/a) 1 folder1/a + EOF + git -C unmerged update-index --index-info <input && + + git -C unmerged sparse-checkout init 2>err && + test_i18ngrep "warning.*The following paths are unmerged" err && + + git -C unmerged sparse-checkout set /folder2/* /deep/deeper1/* 2>err && + test_i18ngrep "warning.*The following paths are unmerged" err && + test_path_is_file dirty/folder1/a && + + git -C unmerged sparse-checkout disable 2>err && + test_i18ngrep "warning.*The following paths are unmerged" err && + + git -C unmerged reset --hard && + git -C unmerged sparse-checkout init && + git -C unmerged sparse-checkout set /folder2/* /deep/deeper1/* && + git -C unmerged sparse-checkout disable +' + +test_expect_success 'sparse-checkout reapply' ' + git clone repo tweak && + + echo dirty >tweak/deep/deeper2/a && + + cat >input <<-EOF && + 0 0000000000000000000000000000000000000000 folder1/a + 100644 $(git -C tweak rev-parse HEAD:folder1/a) 1 folder1/a + EOF + git -C tweak update-index --index-info <input && + + git -C tweak sparse-checkout init --cone 2>err && + test_i18ngrep "warning.*The following paths are not up to date" err && + test_i18ngrep "warning.*The following paths are unmerged" err && + + git -C tweak sparse-checkout set folder2 deep/deeper1 2>err && + test_i18ngrep "warning.*The following paths are not up to date" err && + test_i18ngrep "warning.*The following paths are unmerged" err && + + git -C tweak sparse-checkout reapply 2>err && + test_i18ngrep "warning.*The following paths are not up to date" err && + test_path_is_file tweak/deep/deeper2/a && + test_i18ngrep "warning.*The following paths are unmerged" err && + test_path_is_file tweak/folder1/a && + + git -C tweak checkout HEAD deep/deeper2/a && + git -C tweak sparse-checkout reapply 2>err && + test_i18ngrep ! "warning.*The following paths are not up to date" err && + test_path_is_missing tweak/deep/deeper2/a && + test_i18ngrep "warning.*The following paths are unmerged" err && + test_path_is_file tweak/folder1/a && + + git -C tweak add folder1/a && + git -C tweak sparse-checkout reapply 2>err && + test_must_be_empty err && + test_path_is_missing tweak/deep/deeper2/a && + test_path_is_missing tweak/folder1/a && + + git -C tweak sparse-checkout disable +' + +test_expect_success 'cone mode: set with core.ignoreCase=true' ' + rm repo/.git/info/sparse-checkout && + git -C repo sparse-checkout init --cone && + git -C repo -c core.ignoreCase=true sparse-checkout set folder1 && + cat >expect <<-\EOF && + /* + !/*/ + /folder1/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a folder1 +' + +test_expect_success 'interaction with submodules' ' + git clone repo super && + ( + cd super && + mkdir modules && + git submodule add ../repo modules/child && + git add . && + git commit -m "add submodule" && + git sparse-checkout init --cone && + git sparse-checkout set folder1 + ) && + check_files super a folder1 modules && + check_files super/modules/child a deep folder1 folder2 +' + +test_expect_success 'different sparse-checkouts with worktrees' ' + git -C repo worktree add --detach ../worktree && + check_files worktree "a deep folder1 folder2" && + git -C worktree sparse-checkout init --cone && + git -C repo sparse-checkout set folder1 && + git -C worktree sparse-checkout set deep/deeper1 && + check_files repo a folder1 && + check_files worktree a deep +' + +test_expect_success 'set using filename keeps file on-disk' ' + git -C repo sparse-checkout set a deep && + cat >expect <<-\EOF && + /* + !/*/ + /a/ + /deep/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep +' + +check_read_tree_errors () { + REPO=$1 + FILES=$2 + ERRORS=$3 + git -C $REPO -c core.sparseCheckoutCone=false read-tree -mu HEAD 2>err && + test_must_be_empty err && + check_files $REPO "$FILES" && + git -C $REPO read-tree -mu HEAD 2>err && + if test -z "$ERRORS" + then + test_must_be_empty err + else + test_i18ngrep "$ERRORS" err + fi && + check_files $REPO $FILES +} + +test_expect_success 'pattern-checks: /A/**' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + /folder1/** + EOF + check_read_tree_errors repo "a folder1" "disabling cone pattern matching" +' + +test_expect_success 'pattern-checks: /A/**/B/' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + /deep/**/deepest + EOF + check_read_tree_errors repo "a deep" "disabling cone pattern matching" && + check_files repo/deep "deeper1" && + check_files repo/deep/deeper1 "deepest" +' + +test_expect_success 'pattern-checks: too short' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + / + EOF + check_read_tree_errors repo "a" "disabling cone pattern matching" +' +test_expect_success 'pattern-checks: not too short' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + /b/ + EOF + git -C repo read-tree -mu HEAD 2>err && + test_must_be_empty err && + check_files repo a +' + +test_expect_success 'pattern-checks: trailing "*"' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + /a* + EOF + check_read_tree_errors repo "a" "disabling cone pattern matching" +' + +test_expect_success 'pattern-checks: starting "*"' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + *eep/ + EOF + check_read_tree_errors repo "a deep" "disabling cone pattern matching" +' + +test_expect_success 'pattern-checks: contained glob characters' ' + for c in "[a]" "\\" "?" "*" + do + cat >repo/.git/info/sparse-checkout <<-EOF && + /* + !/*/ + something$c-else/ + EOF + check_read_tree_errors repo "a" "disabling cone pattern matching" + done +' + +test_expect_success BSLASHPSPEC 'pattern-checks: escaped characters' ' + git clone repo escaped && + TREEOID=$(git -C escaped rev-parse HEAD:folder1) && + NEWTREE=$(git -C escaped mktree <<-EOF + $(git -C escaped ls-tree HEAD) + 040000 tree $TREEOID zbad\\dir + 040000 tree $TREEOID zdoes*exist + 040000 tree $TREEOID zglob[!a]? + EOF + ) && + COMMIT=$(git -C escaped commit-tree $NEWTREE -p HEAD) && + git -C escaped reset --hard $COMMIT && + check_files escaped "a deep folder1 folder2 zbad\\dir zdoes*exist" zglob[!a]? && + git -C escaped sparse-checkout init --cone && + git -C escaped sparse-checkout set zbad\\dir/bogus "zdoes*not*exist" "zdoes*exist" "zglob[!a]?" && + cat >expect <<-\EOF && + /* + !/*/ + /zbad\\dir/ + !/zbad\\dir/*/ + /zbad\\dir/bogus/ + /zdoes\*exist/ + /zdoes\*not\*exist/ + /zglob\[!a]\?/ + EOF + test_cmp expect escaped/.git/info/sparse-checkout && + check_read_tree_errors escaped "a zbad\\dir zdoes*exist zglob[!a]?" && + git -C escaped ls-tree -d --name-only HEAD >list-expect && + git -C escaped sparse-checkout set --stdin <list-expect && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + /folder1/ + /folder2/ + /zbad\\dir/ + /zdoes\*exist/ + /zglob\[!a]\?/ + EOF + test_cmp expect escaped/.git/info/sparse-checkout && + check_files escaped "a deep folder1 folder2 zbad\\dir zdoes*exist" zglob[!a]? && + git -C escaped sparse-checkout list >list-actual && + test_cmp list-expect list-actual +' + +test_expect_success MINGW 'cone mode replaces backslashes with slashes' ' + git -C repo sparse-checkout set deep\\deeper1 && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + !/deep/*/ + /deep/deeper1/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep && + check_files repo/deep a deeper1 +' + +test_done diff --git a/t/t1300-config.sh b/t/t1300-config.sh index 983a0a1583..97ebfe1f9d 100755 --- a/t/t1300-config.sh +++ b/t/t1300-config.sh @@ -1191,47 +1191,47 @@ test_expect_success 'old-fashioned settings are case insensitive' ' test_when_finished "rm -f testConfig testConfig_expect testConfig_actual" && cat >testConfig_actual <<-EOF && - [V.A] - r = value1 + [V.A] + r = value1 EOF q_to_tab >testConfig_expect <<-EOF && - [V.A] - Qr = value2 + [V.A] + Qr = value2 EOF git config -f testConfig_actual "v.a.r" value2 && test_cmp testConfig_expect testConfig_actual && cat >testConfig_actual <<-EOF && - [V.A] - r = value1 + [V.A] + r = value1 EOF q_to_tab >testConfig_expect <<-EOF && - [V.A] - QR = value2 + [V.A] + QR = value2 EOF git config -f testConfig_actual "V.a.R" value2 && test_cmp testConfig_expect testConfig_actual && cat >testConfig_actual <<-EOF && - [V.A] - r = value1 + [V.A] + r = value1 EOF q_to_tab >testConfig_expect <<-EOF && - [V.A] - r = value1 - Qr = value2 + [V.A] + r = value1 + Qr = value2 EOF git config -f testConfig_actual "V.A.r" value2 && test_cmp testConfig_expect testConfig_actual && cat >testConfig_actual <<-EOF && - [V.A] - r = value1 + [V.A] + r = value1 EOF q_to_tab >testConfig_expect <<-EOF && - [V.A] - r = value1 - Qr = value2 + [V.A] + r = value1 + Qr = value2 EOF git config -f testConfig_actual "v.A.r" value2 && test_cmp testConfig_expect testConfig_actual @@ -1241,26 +1241,26 @@ test_expect_success 'setting different case sensitive subsections ' ' test_when_finished "rm -f testConfig testConfig_expect testConfig_actual" && cat >testConfig_actual <<-EOF && - [V "A"] - R = v1 - [K "E"] - Y = v1 - [a "b"] - c = v1 - [d "e"] - f = v1 + [V "A"] + R = v1 + [K "E"] + Y = v1 + [a "b"] + c = v1 + [d "e"] + f = v1 EOF q_to_tab >testConfig_expect <<-EOF && - [V "A"] - Qr = v2 - [K "E"] - Qy = v2 - [a "b"] - Qc = v2 - [d "e"] - f = v1 - [d "E"] - Qf = v2 + [V "A"] + Qr = v2 + [K "E"] + Qy = v2 + [a "b"] + Qc = v2 + [d "e"] + f = v1 + [d "E"] + Qf = v2 EOF # exact match git config -f testConfig_actual a.b.c v2 && @@ -1408,6 +1408,8 @@ test_expect_success 'urlmatch favors more specific URLs' ' cookieFile = /tmp/wildcard.txt [http "https://*.example.com/wildcardwithsubdomain"] cookieFile = /tmp/wildcardwithsubdomain.txt + [http "https://*.example.*"] + cookieFile = /tmp/multiwildcard.txt [http "https://trailing.example.com"] cookieFile = /tmp/trailing.txt [http "https://user@*.example.com/"] @@ -1454,6 +1456,10 @@ test_expect_success 'urlmatch favors more specific URLs' ' echo http.cookiefile /tmp/sub.txt >expect && git config --get-urlmatch HTTP https://user@sub.example.com >actual && + test_cmp expect actual && + + echo http.cookiefile /tmp/multiwildcard.txt >expect && + git config --get-urlmatch HTTP https://wildcard.example.org >actual && test_cmp expect actual ' @@ -1622,40 +1628,40 @@ test_expect_success 'set up --show-origin tests' ' INCLUDE_DIR="$HOME/include" && mkdir -p "$INCLUDE_DIR" && cat >"$INCLUDE_DIR"/absolute.include <<-\EOF && - [user] - absolute = include + [user] + absolute = include EOF cat >"$INCLUDE_DIR"/relative.include <<-\EOF && - [user] - relative = include + [user] + relative = include EOF cat >"$HOME"/.gitconfig <<-EOF && - [user] - global = true - override = global - [include] - path = "$INCLUDE_DIR/absolute.include" + [user] + global = true + override = global + [include] + path = "$INCLUDE_DIR/absolute.include" EOF cat >.git/config <<-\EOF - [user] - local = true - override = local - [include] - path = ../include/relative.include + [user] + local = true + override = local + [include] + path = ../include/relative.include EOF ' test_expect_success '--show-origin with --list' ' cat >expect <<-EOF && - file:$HOME/.gitconfig user.global=true - file:$HOME/.gitconfig user.override=global - file:$HOME/.gitconfig include.path=$INCLUDE_DIR/absolute.include - file:$INCLUDE_DIR/absolute.include user.absolute=include - file:.git/config user.local=true - file:.git/config user.override=local - file:.git/config include.path=../include/relative.include - file:.git/../include/relative.include user.relative=include - command line: user.cmdline=true + file:$HOME/.gitconfig user.global=true + file:$HOME/.gitconfig user.override=global + file:$HOME/.gitconfig include.path=$INCLUDE_DIR/absolute.include + file:$INCLUDE_DIR/absolute.include user.absolute=include + file:.git/config user.local=true + file:.git/config user.override=local + file:.git/config include.path=../include/relative.include + file:.git/../include/relative.include user.relative=include + command line: user.cmdline=true EOF git -c user.cmdline=true config --list --show-origin >output && test_cmp expect output @@ -1663,16 +1669,16 @@ test_expect_success '--show-origin with --list' ' test_expect_success '--show-origin with --list --null' ' cat >expect <<-EOF && - file:$HOME/.gitconfigQuser.global - trueQfile:$HOME/.gitconfigQuser.override - globalQfile:$HOME/.gitconfigQinclude.path - $INCLUDE_DIR/absolute.includeQfile:$INCLUDE_DIR/absolute.includeQuser.absolute - includeQfile:.git/configQuser.local - trueQfile:.git/configQuser.override - localQfile:.git/configQinclude.path - ../include/relative.includeQfile:.git/../include/relative.includeQuser.relative - includeQcommand line:Quser.cmdline - trueQ + file:$HOME/.gitconfigQuser.global + trueQfile:$HOME/.gitconfigQuser.override + globalQfile:$HOME/.gitconfigQinclude.path + $INCLUDE_DIR/absolute.includeQfile:$INCLUDE_DIR/absolute.includeQuser.absolute + includeQfile:.git/configQuser.local + trueQfile:.git/configQuser.override + localQfile:.git/configQinclude.path + ../include/relative.includeQfile:.git/../include/relative.includeQuser.relative + includeQcommand line:Quser.cmdline + trueQ EOF git -c user.cmdline=true config --null --list --show-origin >output.raw && nul_to_q <output.raw >output && @@ -1684,9 +1690,9 @@ test_expect_success '--show-origin with --list --null' ' test_expect_success '--show-origin with single file' ' cat >expect <<-\EOF && - file:.git/config user.local=true - file:.git/config user.override=local - file:.git/config include.path=../include/relative.include + file:.git/config user.local=true + file:.git/config user.override=local + file:.git/config include.path=../include/relative.include EOF git config --local --list --show-origin >output && test_cmp expect output @@ -1694,8 +1700,8 @@ test_expect_success '--show-origin with single file' ' test_expect_success '--show-origin with --get-regexp' ' cat >expect <<-EOF && - file:$HOME/.gitconfig user.global true - file:.git/config user.local true + file:$HOME/.gitconfig user.global true + file:.git/config user.local true EOF git config --show-origin --get-regexp "user\.[g|l].*" >output && test_cmp expect output @@ -1703,31 +1709,36 @@ test_expect_success '--show-origin with --get-regexp' ' test_expect_success '--show-origin getting a single key' ' cat >expect <<-\EOF && - file:.git/config local + file:.git/config local EOF git config --show-origin user.override >output && test_cmp expect output ' test_expect_success 'set up custom config file' ' - CUSTOM_CONFIG_FILE="file\" (dq) and spaces.conf" && + CUSTOM_CONFIG_FILE="custom.conf" && cat >"$CUSTOM_CONFIG_FILE" <<-\EOF - [user] - custom = true + [user] + custom = true EOF ' +test_expect_success !MINGW 'set up custom config file with special name characters' ' + WEIRDLY_NAMED_FILE="file\" (dq) and spaces.conf" && + cp "$CUSTOM_CONFIG_FILE" "$WEIRDLY_NAMED_FILE" +' + test_expect_success !MINGW '--show-origin escape special file name characters' ' cat >expect <<-\EOF && - file:"file\" (dq) and spaces.conf" user.custom=true + file:"file\" (dq) and spaces.conf" user.custom=true EOF - git config --file "$CUSTOM_CONFIG_FILE" --show-origin --list >output && + git config --file "$WEIRDLY_NAMED_FILE" --show-origin --list >output && test_cmp expect output ' test_expect_success '--show-origin stdin' ' cat >expect <<-\EOF && - standard input: user.custom=true + standard input: user.custom=true EOF git config --file - --show-origin --list <"$CUSTOM_CONFIG_FILE" >output && test_cmp expect output @@ -1735,11 +1746,11 @@ test_expect_success '--show-origin stdin' ' test_expect_success '--show-origin stdin with file include' ' cat >"$INCLUDE_DIR"/stdin.include <<-EOF && - [user] - stdin = include + [user] + stdin = include EOF cat >expect <<-EOF && - file:$INCLUDE_DIR/stdin.include include + file:$INCLUDE_DIR/stdin.include include EOF echo "[include]path=\"$INCLUDE_DIR\"/stdin.include" | git config --show-origin --includes --file - user.stdin >output && @@ -1747,18 +1758,18 @@ test_expect_success '--show-origin stdin with file include' ' test_cmp expect output ' -test_expect_success !MINGW '--show-origin blob' ' +test_expect_success '--show-origin blob' ' blob=$(git hash-object -w "$CUSTOM_CONFIG_FILE") && cat >expect <<-EOF && - blob:$blob user.custom=true + blob:$blob user.custom=true EOF git config --blob=$blob --show-origin --list >output && test_cmp expect output ' -test_expect_success !MINGW '--show-origin blob ref' ' +test_expect_success '--show-origin blob ref' ' cat >expect <<-\EOF && - blob:"master:file\" (dq) and spaces.conf" user.custom=true + blob:master:custom.conf user.custom=true EOF git add "$CUSTOM_CONFIG_FILE" && git commit -m "new config file" && @@ -1766,6 +1777,65 @@ test_expect_success !MINGW '--show-origin blob ref' ' test_cmp expect output ' +test_expect_success '--show-scope with --list' ' + cat >expect <<-EOF && + global user.global=true + global user.override=global + global include.path=$INCLUDE_DIR/absolute.include + global user.absolute=include + local user.local=true + local user.override=local + local include.path=../include/relative.include + local user.relative=include + command user.cmdline=true + EOF + git -c user.cmdline=true config --list --show-scope >output && + test_cmp expect output +' + +test_expect_success !MINGW '--show-scope with --blob' ' + blob=$(git hash-object -w "$CUSTOM_CONFIG_FILE") && + cat >expect <<-EOF && + command user.custom=true + EOF + git config --blob=$blob --show-scope --list >output && + test_cmp expect output +' + +test_expect_success '--show-scope with --local' ' + cat >expect <<-\EOF && + local user.local=true + local user.override=local + local include.path=../include/relative.include + EOF + git config --local --list --show-scope >output && + test_cmp expect output +' + +test_expect_success '--show-scope getting a single value' ' + cat >expect <<-\EOF && + local true + EOF + git config --show-scope --get user.local >output && + test_cmp expect output +' + +test_expect_success '--show-scope with --show-origin' ' + cat >expect <<-EOF && + global file:$HOME/.gitconfig user.global=true + global file:$HOME/.gitconfig user.override=global + global file:$HOME/.gitconfig include.path=$INCLUDE_DIR/absolute.include + global file:$INCLUDE_DIR/absolute.include user.absolute=include + local file:.git/config user.local=true + local file:.git/config user.override=local + local file:.git/config include.path=../include/relative.include + local file:.git/../include/relative.include user.relative=include + command command line: user.cmdline=true + EOF + git -c user.cmdline=true config --list --show-origin --show-scope >output && + test_cmp expect output +' + test_expect_success '--local requires a repo' ' # we expect 128 to ensure that we do not simply # fail to find anything and return code "1" diff --git a/t/t1305-config-include.sh b/t/t1305-config-include.sh index d20b4d150d..f1e1b289f9 100755 --- a/t/t1305-config-include.sh +++ b/t/t1305-config-include.sh @@ -63,7 +63,7 @@ test_expect_success 'listing includes option and expansion' ' test.one=1 EOF git config --list >actual.full && - grep -v ^core actual.full >actual && + grep -v -e ^core -e ^extensions actual.full >actual && test_cmp expect actual ' diff --git a/t/t1306-xdg-files.sh b/t/t1306-xdg-files.sh index 21e139a313..dd87b43be1 100755 --- a/t/t1306-xdg-files.sh +++ b/t/t1306-xdg-files.sh @@ -153,7 +153,7 @@ test_expect_success 'Checking attributes in both XDG and local attributes files' test_expect_success 'Checking attributes in a non-XDG global attributes file' ' - test_might_fail rm .gitattributes && + rm -f .gitattributes && echo "f attr_f=test" >"$HOME"/my_gitattributes && git config core.attributesfile "$HOME"/my_gitattributes && echo "f: attr_f: test" >expected && @@ -165,7 +165,7 @@ test_expect_success 'Checking attributes in a non-XDG global attributes file' ' test_expect_success 'write: xdg file exists and ~/.gitconfig doesn'\''t' ' mkdir -p "$HOME"/.config/git && >"$HOME"/.config/git/config && - test_might_fail rm "$HOME"/.gitconfig && + rm -f "$HOME"/.gitconfig && git config --global user.name "write_config" && echo "[user]" >expected && echo " name = write_config" >>expected && @@ -183,8 +183,8 @@ test_expect_success 'write: xdg file exists and ~/.gitconfig exists' ' test_expect_success 'write: ~/.config/git/ exists and config file doesn'\''t' ' - test_might_fail rm "$HOME"/.gitconfig && - test_might_fail rm "$HOME"/.config/git/config && + rm -f "$HOME"/.gitconfig && + rm -f "$HOME"/.config/git/config && git config --global user.name "write_gitconfig" && echo "[user]" >expected && echo " name = write_gitconfig" >>expected && diff --git a/t/t1307-config-blob.sh b/t/t1307-config-blob.sh index 37dc689d8c..002e6d3388 100755 --- a/t/t1307-config-blob.sh +++ b/t/t1307-config-blob.sh @@ -74,7 +74,7 @@ test_expect_success 'can parse blob ending with CR' ' ' test_expect_success 'config --blob outside of a repository is an error' ' - test_must_fail nongit git config --blob=foo --list + nongit test_must_fail git config --blob=foo --list ' test_done diff --git a/t/t1308-config-set.sh b/t/t1308-config-set.sh index 7b4e1a63eb..3a527e3a84 100755 --- a/t/t1308-config-set.sh +++ b/t/t1308-config-set.sh @@ -238,8 +238,8 @@ test_expect_success 'error on modifying repo config without repo' ' cmdline_config="'foo.bar=from-cmdline'" test_expect_success 'iteration shows correct origins' ' - echo "[foo]bar = from-repo" >.git/config && - echo "[foo]bar = from-home" >.gitconfig && + printf "[ignore]\n\tthis = please\n[foo]bar = from-repo\n" >.git/config && + printf "[foo]\n\tbar = from-home\n" >.gitconfig && if test_have_prereq MINGW then # Use Windows path (i.e. *not* $HOME) @@ -253,19 +253,29 @@ test_expect_success 'iteration shows correct origins' ' value=from-home origin=file name=$HOME_GITCONFIG + lno=2 scope=global + key=ignore.this + value=please + origin=file + name=.git/config + lno=2 + scope=local + key=foo.bar value=from-repo origin=file name=.git/config - scope=repo + lno=3 + scope=local key=foo.bar value=from-cmdline origin=command line name= - scope=cmdline + lno=-1 + scope=command EOF GIT_CONFIG_PARAMETERS=$cmdline_config test-tool config iterate >actual && test_cmp expect actual diff --git a/t/t1309-early-config.sh b/t/t1309-early-config.sh index 3a0de0ddaa..ebb8e1aecb 100755 --- a/t/t1309-early-config.sh +++ b/t/t1309-early-config.sh @@ -29,7 +29,7 @@ test_expect_success 'ceiling' ' cd sub && test-tool config read_early_config early.config ) >output && - test -z "$(cat output)" + test_must_be_empty output ' test_expect_success 'ceiling #2' ' diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index 1fbd940408..e1197ac818 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -344,14 +344,16 @@ test_expect_success "verifying $m's log (logged by config)" ' test_cmp expect .git/logs/$m ' -git update-ref $m $D -cat >.git/logs/$m <<EOF -$Z $C $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150320 -0500 -$C $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150350 -0500 -$A $B $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150380 -0500 -$F $Z $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150680 -0500 -$Z $E $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150980 -0500 -EOF +test_expect_success 'set up for querying the reflog' ' + git update-ref $m $D && + cat >.git/logs/$m <<-EOF + $Z $C $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150320 -0500 + $C $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150350 -0500 + $A $B $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150380 -0500 + $F $Z $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150680 -0500 + $Z $E $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150980 -0500 + EOF +' ed="Thu, 26 May 2005 18:32:00 -0500" gd="Thu, 26 May 2005 18:33:00 -0500" @@ -359,55 +361,67 @@ ld="Thu, 26 May 2005 18:43:00 -0500" test_expect_success 'Query "master@{May 25 2005}" (before history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{May 25 2005}" >o 2>e && - test $C = $(cat o) && - test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" + echo "$C" >expect && + test_cmp expect o && + echo "warning: log for '\''master'\'' only goes back to $ed" >expect && + test_i18ncmp expect e ' test_expect_success 'Query master@{2005-05-25} (before history)' ' test_when_finished "rm -f o e" && git rev-parse --verify master@{2005-05-25} >o 2>e && - test $C = $(cat o) && - test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" + echo "$C" >expect && + test_cmp expect o && + echo "warning: log for '\''master'\'' only goes back to $ed" >expect && + test_i18ncmp expect e ' test_expect_success 'Query "master@{May 26 2005 23:31:59}" (1 second before history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{May 26 2005 23:31:59}" >o 2>e && - test $C = $(cat o) && - test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" + echo "$C" >expect && + test_cmp expect o && + echo "warning: log for '\''master'\'' only goes back to $ed" >expect && + test_i18ncmp expect e ' test_expect_success 'Query "master@{May 26 2005 23:32:00}" (exactly history start)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{May 26 2005 23:32:00}" >o 2>e && - test $C = $(cat o) && - test "" = "$(cat e)" + echo "$C" >expect && + test_cmp expect o && + test_must_be_empty e ' test_expect_success 'Query "master@{May 26 2005 23:32:30}" (first non-creation change)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{May 26 2005 23:32:30}" >o 2>e && - test $A = $(cat o) && - test "" = "$(cat e)" + echo "$A" >expect && + test_cmp expect o && + test_must_be_empty e ' test_expect_success 'Query "master@{2005-05-26 23:33:01}" (middle of history with gap)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{2005-05-26 23:33:01}" >o 2>e && - test $B = $(cat o) && + echo "$B" >expect && + test_cmp expect o && test_i18ngrep -F "warning: log for ref $m has gap after $gd" e ' test_expect_success 'Query "master@{2005-05-26 23:38:00}" (middle of history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{2005-05-26 23:38:00}" >o 2>e && - test $Z = $(cat o) && - test "" = "$(cat e)" + echo "$Z" >expect && + test_cmp expect o && + test_must_be_empty e ' test_expect_success 'Query "master@{2005-05-26 23:43:00}" (exact end of history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{2005-05-26 23:43:00}" >o 2>e && - test $E = $(cat o) && - test "" = "$(cat e)" + echo "$E" >expect && + test_cmp expect o && + test_must_be_empty e ' test_expect_success 'Query "master@{2005-05-28}" (past end of history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{2005-05-28}" >o 2>e && - test $D = $(cat o) && + echo "$D" >expect && + test_cmp expect o && test_i18ngrep -F "warning: log for ref $m unexpectedly ended on $ld" e ' @@ -1340,15 +1354,6 @@ test_expect_success 'fails with duplicate ref update via symref' ' test_cmp expect actual ' -run_with_limited_open_files () { - (ulimit -n 32 && "$@") -} - -test_lazy_prereq ULIMIT_FILE_DESCRIPTORS ' - test_have_prereq !MINGW,!CYGWIN && - run_with_limited_open_files true -' - test_expect_success ULIMIT_FILE_DESCRIPTORS 'large transaction creating branches does not burst open file limit' ' ( for i in $(test_seq 33) @@ -1390,4 +1395,135 @@ test_expect_success 'handle per-worktree refs in refs/bisect' ' ! test_cmp main-head worktree-head ' +test_expect_success 'transaction handles empty commit' ' + cat >stdin <<-EOF && + start + prepare + commit + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" start prepare commit >expect && + test_cmp expect actual +' + +test_expect_success 'transaction handles empty commit with missing prepare' ' + cat >stdin <<-EOF && + start + commit + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" start commit >expect && + test_cmp expect actual +' + +test_expect_success 'transaction handles sole commit' ' + cat >stdin <<-EOF && + commit + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" commit >expect && + test_cmp expect actual +' + +test_expect_success 'transaction handles empty abort' ' + cat >stdin <<-EOF && + start + prepare + abort + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" start prepare abort >expect && + test_cmp expect actual +' + +test_expect_success 'transaction exits on multiple aborts' ' + cat >stdin <<-EOF && + abort + abort + EOF + test_must_fail git update-ref --stdin <stdin >actual 2>err && + printf "%s: ok\n" abort >expect && + test_cmp expect actual && + grep "fatal: transaction is closed" err +' + +test_expect_success 'transaction exits on start after prepare' ' + cat >stdin <<-EOF && + prepare + start + EOF + test_must_fail git update-ref --stdin <stdin 2>err >actual && + printf "%s: ok\n" prepare >expect && + test_cmp expect actual && + grep "fatal: prepared transactions can only be closed" err +' + +test_expect_success 'transaction handles empty abort with missing prepare' ' + cat >stdin <<-EOF && + start + abort + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" start abort >expect && + test_cmp expect actual +' + +test_expect_success 'transaction handles sole abort' ' + cat >stdin <<-EOF && + abort + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" abort >expect && + test_cmp expect actual +' + +test_expect_success 'transaction can handle commit' ' + cat >stdin <<-EOF && + start + create $a HEAD + commit + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" start commit >expect && + test_cmp expect actual && + git rev-parse HEAD >expect && + git rev-parse $a >actual && + test_cmp expect actual +' + +test_expect_success 'transaction can handle abort' ' + cat >stdin <<-EOF && + start + create $b HEAD + abort + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" start abort >expect && + test_cmp expect actual && + test_path_is_missing .git/$b +' + +test_expect_success 'transaction aborts by default' ' + cat >stdin <<-EOF && + start + create $b HEAD + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" start >expect && + test_cmp expect actual && + test_path_is_missing .git/$b +' + +test_expect_success 'transaction with prepare aborts by default' ' + cat >stdin <<-EOF && + start + create $b HEAD + prepare + EOF + git update-ref --stdin <stdin >actual && + printf "%s: ok\n" start prepare >expect && + test_cmp expect actual && + test_path_is_missing .git/$b +' + test_done diff --git a/t/t1406-submodule-ref-store.sh b/t/t1406-submodule-ref-store.sh index d199d872fb..36b7ef5046 100755 --- a/t/t1406-submodule-ref-store.sh +++ b/t/t1406-submodule-ref-store.sh @@ -75,7 +75,7 @@ test_expect_success 'for_each_reflog()' ' ' test_expect_success 'for_each_reflog_ent()' ' - $RUN for-each-reflog-ent HEAD >actual && cat actual && + $RUN for-each-reflog-ent HEAD >actual && head -n1 actual | grep first && tail -n2 actual | head -n1 | grep master.to.new ' diff --git a/t/t1409-avoid-packing-refs.sh b/t/t1409-avoid-packing-refs.sh index e5cb8a252d..be12fb6350 100755 --- a/t/t1409-avoid-packing-refs.sh +++ b/t/t1409-avoid-packing-refs.sh @@ -8,7 +8,7 @@ test_description='avoid rewriting packed-refs unnecessarily' # shouldn't upset readers, and it should be omitted if the file is # ever rewritten. mark_packed_refs () { - sed -e "s/^\(#.*\)/\1 t1409 /" <.git/packed-refs >.git/packed-refs.new && + sed -e "s/^\(#.*\)/\1 t1409 /" .git/packed-refs >.git/packed-refs.new && mv .git/packed-refs.new .git/packed-refs } @@ -27,15 +27,15 @@ test_expect_success 'setup' ' ' test_expect_success 'do not create packed-refs file gratuitously' ' - test_must_fail test -f .git/packed-refs && + test_path_is_missing .git/packed-refs && git update-ref refs/heads/foo $A && - test_must_fail test -f .git/packed-refs && + test_path_is_missing .git/packed-refs && git update-ref refs/heads/foo $B && - test_must_fail test -f .git/packed-refs && + test_path_is_missing .git/packed-refs && git update-ref refs/heads/foo $C $B && - test_must_fail test -f .git/packed-refs && + test_path_is_missing .git/packed-refs && git update-ref -d refs/heads/foo && - test_must_fail test -f .git/packed-refs + test_path_is_missing .git/packed-refs ' test_expect_success 'check that marking the packed-refs file works' ' @@ -46,7 +46,7 @@ test_expect_success 'check that marking the packed-refs file works' ' git for-each-ref >actual && test_cmp expected actual && git pack-refs --all && - test_must_fail check_packed_refs_marked && + ! check_packed_refs_marked && git for-each-ref >actual2 && test_cmp expected actual2 ' @@ -80,7 +80,7 @@ test_expect_success 'touch packed-refs on delete of packed' ' git pack-refs --all && mark_packed_refs && git update-ref -d refs/heads/packed-delete && - test_must_fail check_packed_refs_marked + ! check_packed_refs_marked ' test_expect_success 'leave packed-refs untouched on update of loose' ' diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 82950c0282..76d9b744a6 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -195,7 +195,7 @@ test_expect_success 'delete' ' git reflog delete master@{1} && git reflog show master > output && - test $(($master_entry_count - 1)) = $(wc -l < output) && + test_line_count = $(($master_entry_count - 1)) output && test $HEAD_entry_count = $(git reflog | wc -l) && ! grep ox < output && @@ -209,7 +209,7 @@ test_expect_success 'delete' ' git reflog delete master@{07.04.2005.15:15:00.-0700} && git reflog show master > output && - test $(($master_entry_count - 1)) = $(wc -l < output) && + test_line_count = $(($master_entry_count - 1)) output && ! grep dragon < output ' diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index 50d28e6fdb..344a2aad82 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -133,6 +133,30 @@ test_expect_success 'other worktree HEAD link pointing at a funny place' ' test_i18ngrep "worktrees/other/HEAD points to something strange" out ' +test_expect_success 'commit with multiple signatures is okay' ' + git cat-file commit HEAD >basis && + cat >sigs <<-EOF && + gpgsig -----BEGIN PGP SIGNATURE----- + VGhpcyBpcyBub3QgcmVhbGx5IGEgc2lnbmF0dXJlLg== + -----END PGP SIGNATURE----- + gpgsig-sha256 -----BEGIN PGP SIGNATURE----- + VGhpcyBpcyBub3QgcmVhbGx5IGEgc2lnbmF0dXJlLg== + -----END PGP SIGNATURE----- + EOF + sed -e "/^committer/q" basis >okay && + cat sigs >>okay && + echo >>okay && + sed -e "1,/^$/d" basis >>okay && + cat okay && + new=$(git hash-object -t commit -w --stdin <okay) && + test_when_finished "remove_object $new" && + git update-ref refs/heads/bogus "$new" && + test_when_finished "git update-ref -d refs/heads/bogus" && + git fsck 2>out && + cat out && + ! grep "commit $new" out +' + test_expect_success 'email without @ is okay' ' git cat-file commit HEAD >basis && sed "s/@/AT/" basis >okay && @@ -141,7 +165,6 @@ test_expect_success 'email without @ is okay' ' git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && git fsck 2>out && - cat out && ! grep "commit $new" out ' @@ -234,6 +257,35 @@ test_expect_success 'tree object with duplicate entries' ' test_i18ngrep "error in tree .*contains duplicate file entries" out ' +check_duplicate_names () { + expect=$1 && + shift && + names=$@ && + test_expect_$expect "tree object with duplicate names: $names" ' + test_when_finished "remove_object \$blob" && + test_when_finished "remove_object \$tree" && + test_when_finished "remove_object \$badtree" && + blob=$(echo blob | git hash-object -w --stdin) && + printf "100644 blob %s\t%s\n" $blob x.2 >tree && + tree=$(git mktree <tree) && + for name in $names + do + case "$name" in + */) printf "040000 tree %s\t%s\n" $tree "${name%/}" ;; + *) printf "100644 blob %s\t%s\n" $blob "$name" ;; + esac + done >badtree && + badtree=$(git mktree <badtree) && + test_must_fail git fsck 2>out && + test_i18ngrep "$badtree" out && + test_i18ngrep "error in tree .*contains duplicate file entries" out + ' +} + +check_duplicate_names success x x.1 x/ +check_duplicate_names success x x.1.2 x.1/ x/ +check_duplicate_names success x x.1 x.1.2 x/ + test_expect_success 'unparseable tree object' ' test_oid_cache <<-\EOF && junk sha1:twenty-bytes-of-junk @@ -441,6 +493,7 @@ while read name path pretty; do ( git init $name-$type && cd $name-$type && + git config core.protectNTFS false && echo content >file && git add file && git commit -m base && @@ -616,7 +669,7 @@ test_expect_success 'fsck --name-objects' ' remove_object $(git rev-parse julius:caesar.t) && test_must_fail git fsck --name-objects >out && tree=$(git rev-parse --verify julius:) && - test_i18ngrep -E "$tree \((refs/heads/master|HEAD)@\{[0-9]*\}:" out + test_i18ngrep "$tree (refs/tags/julius:" out ) ' diff --git a/t/t1500-rev-parse.sh b/t/t1500-rev-parse.sh index 01abee533d..603019b541 100755 --- a/t/t1500-rev-parse.sh +++ b/t/t1500-rev-parse.sh @@ -59,6 +59,7 @@ test_rev_parse () { ROOT=$(pwd) test_expect_success 'setup' ' + test_oid_init && mkdir -p sub/dir work && cp -R .git repo.git ' @@ -131,6 +132,30 @@ test_expect_success 'rev-parse --is-shallow-repository in non-shallow repo' ' test_cmp expect actual ' +test_expect_success 'rev-parse --show-object-format in repo' ' + echo "$(test_oid algo)" >expect && + git rev-parse --show-object-format >actual && + test_cmp expect actual && + git rev-parse --show-object-format=storage >actual && + test_cmp expect actual && + git rev-parse --show-object-format=input >actual && + test_cmp expect actual && + git rev-parse --show-object-format=output >actual && + test_cmp expect actual && + test_must_fail git rev-parse --show-object-format=squeamish-ossifrage 2>err && + grep "unknown mode for --show-object-format: squeamish-ossifrage" err +' + +test_expect_success '--show-toplevel from subdir of working tree' ' + pwd >expect && + git -C sub/dir rev-parse --show-toplevel >actual && + test_cmp expect actual +' + +test_expect_success '--show-toplevel from inside .git' ' + test_must_fail git -C .git rev-parse --show-toplevel +' + test_expect_success 'showing the superproject correctly' ' git rev-parse --show-superproject-working-tree >out && test_must_be_empty out && diff --git a/t/t1501-work-tree.sh b/t/t1501-work-tree.sh index 3498d3d55e..b75558040f 100755 --- a/t/t1501-work-tree.sh +++ b/t/t1501-work-tree.sh @@ -350,7 +350,7 @@ test_expect_success 'Multi-worktree setup' ' mkdir work && mkdir -p repo.git/repos/foo && cp repo.git/HEAD repo.git/index repo.git/repos/foo && - test_might_fail cp repo.git/sharedindex.* repo.git/repos/foo && + { cp repo.git/sharedindex.* repo.git/repos/foo || :; } && sane_unset GIT_DIR GIT_CONFIG GIT_WORK_TREE ' diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 624d0a588f..52edcbdcc3 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -9,10 +9,10 @@ exec </dev/null test_did_you_mean () { cat >expected <<-EOF && - fatal: Path '$2$3' $4, but not ${5:-$SQ$3$SQ}. - Did you mean '$1:$2$3'${2:+ aka $SQ$1:./$3$SQ}? + fatal: path '$2$3' $4, but not ${5:-$SQ$3$SQ} + hint: Did you mean '$1:$2$3'${2:+ aka $SQ$1:./$3$SQ}? EOF - test_cmp expected error + test_i18ncmp expected error } HASH_file= @@ -103,66 +103,66 @@ test_expect_success 'correct relative file objects (6)' ' test_expect_success 'incorrect revision id' ' test_must_fail git rev-parse foobar:file.txt 2>error && - grep "Invalid object name '"'"'foobar'"'"'." error && - test_must_fail git rev-parse foobar 2> error && + test_i18ngrep "invalid object name .foobar." error && + test_must_fail git rev-parse foobar 2>error && test_i18ngrep "unknown revision or path not in the working tree." error ' test_expect_success 'incorrect file in sha1:path' ' - test_must_fail git rev-parse HEAD:nothing.txt 2> error && - grep "fatal: Path '"'"'nothing.txt'"'"' does not exist in '"'"'HEAD'"'"'" error && - test_must_fail git rev-parse HEAD:index-only.txt 2> error && - grep "fatal: Path '"'"'index-only.txt'"'"' exists on disk, but not in '"'"'HEAD'"'"'." error && + test_must_fail git rev-parse HEAD:nothing.txt 2>error && + test_i18ngrep "path .nothing.txt. does not exist in .HEAD." error && + test_must_fail git rev-parse HEAD:index-only.txt 2>error && + test_i18ngrep "path .index-only.txt. exists on disk, but not in .HEAD." error && (cd subdir && - test_must_fail git rev-parse HEAD:file2.txt 2> error && + test_must_fail git rev-parse HEAD:file2.txt 2>error && test_did_you_mean HEAD subdir/ file2.txt exists ) ' test_expect_success 'incorrect file in :path and :N:path' ' - test_must_fail git rev-parse :nothing.txt 2> error && - grep "fatal: Path '"'"'nothing.txt'"'"' does not exist (neither on disk nor in the index)." error && - test_must_fail git rev-parse :1:nothing.txt 2> error && - grep "Path '"'"'nothing.txt'"'"' does not exist (neither on disk nor in the index)." error && - test_must_fail git rev-parse :1:file.txt 2> error && + test_must_fail git rev-parse :nothing.txt 2>error && + test_i18ngrep "path .nothing.txt. does not exist (neither on disk nor in the index)" error && + test_must_fail git rev-parse :1:nothing.txt 2>error && + test_i18ngrep "path .nothing.txt. does not exist (neither on disk nor in the index)" error && + test_must_fail git rev-parse :1:file.txt 2>error && test_did_you_mean ":0" "" file.txt "is in the index" "at stage 1" && (cd subdir && - test_must_fail git rev-parse :1:file.txt 2> error && + test_must_fail git rev-parse :1:file.txt 2>error && test_did_you_mean ":0" "" file.txt "is in the index" "at stage 1" && - test_must_fail git rev-parse :file2.txt 2> error && + test_must_fail git rev-parse :file2.txt 2>error && test_did_you_mean ":0" subdir/ file2.txt "is in the index" && - test_must_fail git rev-parse :2:file2.txt 2> error && + test_must_fail git rev-parse :2:file2.txt 2>error && test_did_you_mean :0 subdir/ file2.txt "is in the index") && - test_must_fail git rev-parse :disk-only.txt 2> error && - grep "fatal: Path '"'"'disk-only.txt'"'"' exists on disk, but not in the index." error + test_must_fail git rev-parse :disk-only.txt 2>error && + test_i18ngrep "path .disk-only.txt. exists on disk, but not in the index" error ' test_expect_success 'invalid @{n} reference' ' test_must_fail git rev-parse master@{99999} >output 2>error && - test -z "$(cat output)" && - grep "fatal: Log for [^ ]* only has [0-9][0-9]* entries." error && + test_must_be_empty output && + test_i18ngrep "log for [^ ]* only has [0-9][0-9]* entries" error && test_must_fail git rev-parse --verify master@{99999} >output 2>error && - test -z "$(cat output)" && - grep "fatal: Log for [^ ]* only has [0-9][0-9]* entries." error + test_must_be_empty output && + test_i18ngrep "log for [^ ]* only has [0-9][0-9]* entries" error ' test_expect_success 'relative path not found' ' ( cd subdir && test_must_fail git rev-parse HEAD:./nonexistent.txt 2>error && - grep subdir/nonexistent.txt error + test_i18ngrep subdir/nonexistent.txt error ) ' test_expect_success 'relative path outside worktree' ' test_must_fail git rev-parse HEAD:../file.txt >output 2>error && - test -z "$(cat output)" && + test_must_be_empty output && test_i18ngrep "outside repository" error ' test_expect_success 'relative path when cwd is outside worktree' ' test_must_fail git --git-dir=.git --work-tree=subdir rev-parse HEAD:./file.txt >output 2>error && - test -z "$(cat output)" && - grep "relative path syntax can.t be used outside working tree." error + test_must_be_empty output && + test_i18ngrep "relative path syntax can.t be used outside working tree" error ' test_expect_success '<commit>:file correctly diagnosed after a pathname' ' @@ -222,4 +222,18 @@ test_expect_success 'reject Nth ancestor if N is too high' ' test_must_fail git rev-parse HEAD~100000000000000000000000000000000 ' +test_expect_success 'pathspecs with wildcards are not ambiguous' ' + echo "*.c" >expect && + git rev-parse "*.c" >actual && + test_cmp expect actual +' + +test_expect_success 'backslash does not trigger wildcard rule' ' + test_must_fail git rev-parse "foo\\bar" +' + +test_expect_success 'escaped char does not trigger wildcard rule' ' + test_must_fail git rev-parse "foo\\*bar" +' + test_done diff --git a/t/t1507-rev-parse-upstream.sh b/t/t1507-rev-parse-upstream.sh index 8b4cf8a6e3..dfc0d96d8a 100755 --- a/t/t1507-rev-parse-upstream.sh +++ b/t/t1507-rev-parse-upstream.sh @@ -28,14 +28,9 @@ test_expect_success 'setup' ' ) ' -full_name () { - (cd clone && - git rev-parse --symbolic-full-name "$@") -} - commit_subject () { (cd clone && - git show -s --pretty=format:%s "$@") + git show -s --pretty=tformat:%s "$@") } error_message () { @@ -44,63 +39,78 @@ error_message () { } test_expect_success '@{upstream} resolves to correct full name' ' - test refs/remotes/origin/master = "$(full_name @{upstream})" && - test refs/remotes/origin/master = "$(full_name @{UPSTREAM})" && - test refs/remotes/origin/master = "$(full_name @{UpSTReam})" + echo refs/remotes/origin/master >expect && + git -C clone rev-parse --symbolic-full-name @{upstream} >actual && + test_cmp expect actual && + git -C clone rev-parse --symbolic-full-name @{UPSTREAM} >actual && + test_cmp expect actual && + git -C clone rev-parse --symbolic-full-name @{UpSTReam} >actual && + test_cmp expect actual ' test_expect_success '@{u} resolves to correct full name' ' - test refs/remotes/origin/master = "$(full_name @{u})" && - test refs/remotes/origin/master = "$(full_name @{U})" + echo refs/remotes/origin/master >expect && + git -C clone rev-parse --symbolic-full-name @{u} >actual && + test_cmp expect actual && + git -C clone rev-parse --symbolic-full-name @{U} >actual && + test_cmp expect actual ' test_expect_success 'my-side@{upstream} resolves to correct full name' ' - test refs/remotes/origin/side = "$(full_name my-side@{u})" + echo refs/remotes/origin/side >expect && + git -C clone rev-parse --symbolic-full-name my-side@{u} >actual && + test_cmp expect actual ' test_expect_success 'upstream of branch with @ in middle' ' - full_name fun@ny@{u} >actual && + git -C clone rev-parse --symbolic-full-name fun@ny@{u} >actual && echo refs/remotes/origin/side >expect && test_cmp expect actual && - full_name fun@ny@{U} >actual && + git -C clone rev-parse --symbolic-full-name fun@ny@{U} >actual && test_cmp expect actual ' test_expect_success 'upstream of branch with @ at start' ' - full_name @funny@{u} >actual && + git -C clone rev-parse --symbolic-full-name @funny@{u} >actual && echo refs/remotes/origin/side >expect && test_cmp expect actual ' test_expect_success 'upstream of branch with @ at end' ' - full_name funny@@{u} >actual && + git -C clone rev-parse --symbolic-full-name funny@@{u} >actual && echo refs/remotes/origin/side >expect && test_cmp expect actual ' test_expect_success 'refs/heads/my-side@{upstream} does not resolve to my-side{upstream}' ' - test_must_fail full_name refs/heads/my-side@{upstream} + test_must_fail git -C clone rev-parse --symbolic-full-name refs/heads/my-side@{upstream} ' test_expect_success 'my-side@{u} resolves to correct commit' ' git checkout side && test_commit 5 && (cd clone && git fetch) && - test 2 = "$(commit_subject my-side)" && - test 5 = "$(commit_subject my-side@{u})" + echo 2 >expect && + commit_subject my-side >actual && + test_cmp expect actual && + echo 5 >expect && + commit_subject my-side@{u} >actual ' test_expect_success 'not-tracking@{u} fails' ' - test_must_fail full_name non-tracking@{u} && + test_must_fail git -C clone rev-parse --symbolic-full-name non-tracking@{u} && (cd clone && git checkout --no-track -b non-tracking) && - test_must_fail full_name non-tracking@{u} + test_must_fail git -C clone rev-parse --symbolic-full-name non-tracking@{u} ' test_expect_success '<branch>@{u}@{1} resolves correctly' ' test_commit 6 && (cd clone && git fetch) && - test 5 = $(commit_subject my-side@{u}@{1}) && - test 5 = $(commit_subject my-side@{U}@{1}) + echo 5 >expect && + commit_subject my-side@{u}@{1} >actual && + test_cmp expect actual && + commit_subject my-side@{U}@{1} >actual && + test_cmp expect actual ' test_expect_success '@{u} without specifying branch fails on a detached HEAD' ' @@ -149,7 +159,9 @@ test_expect_success 'checkout other@{u}' ' ' test_expect_success 'branch@{u} works when tracking a local branch' ' - test refs/heads/master = "$(full_name local-master@{u})" + echo refs/heads/master >expect && + git -C clone rev-parse --symbolic-full-name local-master@{u} >actual && + test_cmp expect actual ' test_expect_success 'branch@{u} error message when no upstream' ' @@ -203,35 +215,37 @@ test_expect_success 'pull works when tracking a local branch' ' # makes sense if the previous one succeeded test_expect_success '@{u} works when tracking a local branch' ' - test refs/heads/master = "$(full_name @{u})" + echo refs/heads/master >expect && + git -C clone rev-parse --symbolic-full-name @{u} >actual && + test_cmp expect actual ' -commit=$(git rev-parse HEAD) -cat >expect <<EOF -commit $commit -Reflog: master@{0} (C O Mitter <committer@example.com>) -Reflog message: branch: Created from HEAD -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:15:13 2005 -0700 - - 3 -EOF test_expect_success 'log -g other@{u}' ' + commit=$(git rev-parse HEAD) && + cat >expect <<-EOF && + commit $commit + Reflog: master@{0} (C O Mitter <committer@example.com>) + Reflog message: branch: Created from HEAD + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 + + 3 + EOF git log -1 -g other@{u} >actual && test_cmp expect actual ' -cat >expect <<EOF -commit $commit -Reflog: master@{Thu Apr 7 15:17:13 2005 -0700} (C O Mitter <committer@example.com>) -Reflog message: branch: Created from HEAD -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:15:13 2005 -0700 - - 3 -EOF - test_expect_success 'log -g other@{u}@{now}' ' + commit=$(git rev-parse HEAD) && + cat >expect <<-EOF && + commit $commit + Reflog: master@{Thu Apr 7 15:17:13 2005 -0700} (C O Mitter <committer@example.com>) + Reflog message: branch: Created from HEAD + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 + + 3 + EOF git log -1 -g other@{u}@{now} >actual && test_cmp expect actual ' diff --git a/t/t1509-root-work-tree.sh b/t/t1509-root-work-tree.sh index 553a3f601b..fd2f7abf1c 100755 --- a/t/t1509-root-work-tree.sh +++ b/t/t1509-root-work-tree.sh @@ -221,7 +221,7 @@ test_expect_success 'setup' ' rm -rf /.git && echo "Initialized empty Git repository in /.git/" > expected && git init > result && - test_cmp expected result + test_i18ncmp expected result ' test_vars 'auto gitdir, root' ".git" "/" "" @@ -246,7 +246,7 @@ test_expect_success 'setup' ' cd / && echo "Initialized empty Git repository in /" > expected && git init --bare > result && - test_cmp expected result + test_i18ncmp expected result ' test_vars 'auto gitdir, root' "." "" "" diff --git a/t/t1512-rev-parse-disambiguation.sh b/t/t1512-rev-parse-disambiguation.sh index c19fb500cb..18fa6cf40d 100755 --- a/t/t1512-rev-parse-disambiguation.sh +++ b/t/t1512-rev-parse-disambiguation.sh @@ -282,7 +282,7 @@ test_expect_success 'rev-parse --disambiguate' ' # commits created by commit-tree in earlier tests share a # different prefix. git rev-parse --disambiguate=000000000 >actual && - test $(wc -l <actual) = 16 && + test_line_count = 16 actual && test "$(sed -e "s/^\(.........\).*/\1/" actual | sort -u)" = 000000000 ' @@ -339,7 +339,7 @@ test_expect_success C_LOCALE_OUTPUT 'ambiguity hints' ' test_expect_success C_LOCALE_OUTPUT 'ambiguity hints respect type' ' test_must_fail git rev-parse 000000000^{commit} 2>stderr && grep ^hint: stderr >hints && - # 5 commits, 1 tag (which is a commitish), plus intro line + # 5 commits, 1 tag (which is a committish), plus intro line test_line_count = 7 hints ' diff --git a/t/t2018-checkout-branch.sh b/t/t2018-checkout-branch.sh index 822381dd9d..5f761bc616 100755 --- a/t/t2018-checkout-branch.sh +++ b/t/t2018-checkout-branch.sh @@ -1,50 +1,76 @@ #!/bin/sh -test_description='checkout ' +test_description='checkout' . ./test-lib.sh -# Arguments: <branch> <sha> [<checkout options>] +# Arguments: [!] <branch> <oid> [<checkout options>] # # Runs "git checkout" to switch to <branch>, testing that # # 1) we are on the specified branch, <branch>; -# 2) HEAD is <sha>; if <sha> is not specified, the old HEAD is used. +# 2) HEAD is <oid>; if <oid> is not specified, the old HEAD is used. # # If <checkout options> is not specified, "git checkout" is run with -b. -do_checkout() { +# +# If the first argument is `!`, "git checkout" is expected to fail when +# it is run. +do_checkout () { + should_fail= && + if test "x$1" = "x!" + then + should_fail=yes && + shift + fi && exp_branch=$1 && exp_ref="refs/heads/$exp_branch" && - # if <sha> is not specified, use HEAD. - exp_sha=${2:-$(git rev-parse --verify HEAD)} && + # if <oid> is not specified, use HEAD. + exp_oid=${2:-$(git rev-parse --verify HEAD)} && # default options for git checkout: -b - if [ -z "$3" ]; then + if test -z "$3" + then opts="-b" else opts="$3" fi - git checkout $opts $exp_branch $exp_sha && + if test -n "$should_fail" + then + test_must_fail git checkout $opts $exp_branch $exp_oid + else + git checkout $opts $exp_branch $exp_oid && + echo "$exp_ref" >ref.expect && + git rev-parse --symbolic-full-name HEAD >ref.actual && + test_cmp ref.expect ref.actual && + echo "$exp_oid" >oid.expect && + git rev-parse --verify HEAD >oid.actual && + test_cmp oid.expect oid.actual + fi +} - test $exp_ref = $(git rev-parse --symbolic-full-name HEAD) && - test $exp_sha = $(git rev-parse --verify HEAD) +test_dirty_unmergeable () { + test_expect_code 1 git diff --exit-code } -test_dirty_unmergeable() { - ! git diff --exit-code >/dev/null +test_dirty_unmergeable_discards_changes () { + git diff --exit-code } -setup_dirty_unmergeable() { +setup_dirty_unmergeable () { echo >>file1 change2 } -test_dirty_mergeable() { - ! git diff --cached --exit-code >/dev/null +test_dirty_mergeable () { + test_expect_code 1 git diff --cached --exit-code +} + +test_dirty_mergeable_discards_changes () { + git diff --cached --exit-code } -setup_dirty_mergeable() { +setup_dirty_mergeable () { echo >file2 file2 && git add file2 } @@ -82,7 +108,7 @@ test_expect_success 'checkout -b to a new branch, set to an explicit ref' ' test_expect_success 'checkout -b to a new branch with unmergeable changes fails' ' setup_dirty_unmergeable && - test_must_fail do_checkout branch2 $HEAD1 && + do_checkout ! branch2 $HEAD1 && test_dirty_unmergeable ' @@ -93,7 +119,7 @@ test_expect_success 'checkout -f -b to a new branch with unmergeable changes dis # still dirty and on branch1 do_checkout branch2 $HEAD1 "-f -b" && - test_must_fail test_dirty_unmergeable + test_dirty_unmergeable_discards_changes ' test_expect_success 'checkout -b to a new branch preserves mergeable changes' ' @@ -111,12 +137,12 @@ test_expect_success 'checkout -f -b to a new branch with mergeable changes disca test_when_finished git reset --hard HEAD && setup_dirty_mergeable && do_checkout branch2 $HEAD1 "-f -b" && - test_must_fail test_dirty_mergeable + test_dirty_mergeable_discards_changes ' test_expect_success 'checkout -b to an existing branch fails' ' test_when_finished git reset --hard HEAD && - test_must_fail do_checkout branch2 $HEAD2 + do_checkout ! branch2 $HEAD2 ' test_expect_success 'checkout -b to @{-1} fails with the right branch name' ' @@ -140,7 +166,8 @@ test_expect_success 'checkout -B to a merge base' ' ' test_expect_success 'checkout -B to an existing branch from detached HEAD resets branch to HEAD' ' - git checkout $(git rev-parse --verify HEAD) && + head=$(git rev-parse --verify HEAD) && + git checkout "$head" && do_checkout branch2 "" -B ' @@ -155,14 +182,14 @@ test_expect_success 'checkout -B to an existing branch with unmergeable changes git checkout branch1 && setup_dirty_unmergeable && - test_must_fail do_checkout branch2 $HEAD1 -B && + do_checkout ! branch2 $HEAD1 -B && test_dirty_unmergeable ' test_expect_success 'checkout -f -B to an existing branch with unmergeable changes discards changes' ' # still dirty and on branch1 do_checkout branch2 $HEAD1 "-f -B" && - test_must_fail test_dirty_unmergeable + test_dirty_unmergeable_discards_changes ' test_expect_success 'checkout -B to an existing branch preserves mergeable changes' ' @@ -179,7 +206,7 @@ test_expect_success 'checkout -f -B to an existing branch with mergeable changes setup_dirty_mergeable && do_checkout branch2 $HEAD1 "-f -B" && - test_must_fail test_dirty_mergeable + test_dirty_mergeable_discards_changes ' test_expect_success 'checkout -b <describe>' ' @@ -211,4 +238,36 @@ test_expect_success 'checkout -b after clone --no-checkout does a checkout of HE test_path_is_file dest/a.t ' +test_expect_success 'checkout -b to a new branch preserves mergeable changes despite sparse-checkout' ' + test_when_finished " + git reset --hard && + git checkout branch1-scratch && + test_might_fail git branch -D branch3 && + git config core.sparseCheckout false && + rm .git/info/sparse-checkout" && + + test_commit file2 && + + echo stuff >>file1 && + echo file2 >.git/info/sparse-checkout && + git config core.sparseCheckout true && + + CURHEAD=$(git rev-parse HEAD) && + do_checkout branch3 $CURHEAD && + + echo file1 >expect && + git diff --name-only >actual && + test_cmp expect actual +' + +test_expect_success 'checkout -b rejects an invalid start point' ' + test_must_fail git checkout -b branch4 file1 2>err && + test_i18ngrep "is not a commit" err +' + +test_expect_success 'checkout -b rejects an extra path argument' ' + test_must_fail git checkout -b branch5 branch1 file1 2>err && + test_i18ngrep "Cannot update paths and switch to branch" err +' + test_done diff --git a/t/t2024-checkout-dwim.sh b/t/t2024-checkout-dwim.sh index fa0718c730..accfa9aa4b 100755 --- a/t/t2024-checkout-dwim.sh +++ b/t/t2024-checkout-dwim.sh @@ -37,7 +37,9 @@ test_expect_success 'setup' ' git checkout -b foo && test_commit a_foo && git checkout -b bar && - test_commit a_bar + test_commit a_bar && + git checkout -b ambiguous_branch_and_file && + test_commit a_ambiguous_branch_and_file ) && git init repo_b && ( @@ -46,7 +48,9 @@ test_expect_success 'setup' ' git checkout -b foo && test_commit b_foo && git checkout -b baz && - test_commit b_baz + test_commit b_baz && + git checkout -b ambiguous_branch_and_file && + test_commit b_ambiguous_branch_and_file ) && git remote add repo_a repo_a && git remote add repo_b repo_b && @@ -75,6 +79,26 @@ test_expect_success 'checkout of branch from multiple remotes fails #1' ' test_branch master ' +test_expect_success 'when arg matches multiple remotes, do not fallback to interpreting as pathspec' ' + # create a file with name matching remote branch name + git checkout -b t_ambiguous_branch_and_file && + >ambiguous_branch_and_file && + git add ambiguous_branch_and_file && + git commit -m "ambiguous_branch_and_file" && + + # modify file to verify that it will not be touched by checkout + test_when_finished "git checkout -- ambiguous_branch_and_file" && + echo "file contents" >ambiguous_branch_and_file && + cp ambiguous_branch_and_file expect && + + test_must_fail git checkout ambiguous_branch_and_file 2>err && + + test_i18ngrep "matched multiple (2) remote tracking branches" err && + + # file must not be altered + test_cmp expect ambiguous_branch_and_file +' + test_expect_success 'checkout of branch from multiple remotes fails with advice' ' git checkout -B master && test_might_fail git branch -D foo && diff --git a/t/t2026-checkout-pathspec-file.sh b/t/t2026-checkout-pathspec-file.sh new file mode 100755 index 0000000000..43d31d7948 --- /dev/null +++ b/t/t2026-checkout-pathspec-file.sh @@ -0,0 +1,163 @@ +#!/bin/sh + +test_description='checkout --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + test_commit file0 && + + echo 1 >fileA.t && + echo 1 >fileB.t && + echo 1 >fileC.t && + echo 1 >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files 1" && + + echo 2 >fileA.t && + echo 2 >fileB.t && + echo 2 >fileC.t && + echo 2 >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files 2" && + + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git status --porcelain --untracked-files=no -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + echo fileA.t | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + echo fileA.t >list && + git checkout --pathspec-from-file=list HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + printf "fileA.t\0fileB.t\0" | git checkout --pathspec-from-file=- --pathspec-file-nul HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t\n" | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t" | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + printf "fileA.t\r\nfileB.t\r\n" | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git checkout --pathspec-from-file=list HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + test_must_fail git checkout --pathspec-from-file=list --pathspec-file-nul HEAD^1 +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + printf "fileB.t\nfileC.t\n" | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileB.t + M fileC.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + + test_must_fail git checkout --pathspec-from-file=list --detach 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --detach" err && + + test_must_fail git checkout --pathspec-from-file=list --patch 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --patch" err && + + test_must_fail git checkout --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git checkout --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err +' + +test_done diff --git a/t/t2027-checkout-track.sh b/t/t2027-checkout-track.sh new file mode 100755 index 0000000000..bcba1bf90c --- /dev/null +++ b/t/t2027-checkout-track.sh @@ -0,0 +1,24 @@ +#!/bin/sh + +test_description='tests for git branch --track' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit one && + test_commit two +' + +test_expect_success 'checkout --track -b creates a new tracking branch' ' + git checkout --track -b branch1 master && + test $(git rev-parse --abbrev-ref HEAD) = branch1 && + test $(git config --get branch.branch1.remote) = . && + test $(git config --get branch.branch1.merge) = refs/heads/master +' + +test_expect_success 'checkout --track -b rejects an extra path argument' ' + test_must_fail git checkout --track -b branch2 master one.t 2>err && + test_i18ngrep "cannot be used with updating paths" err +' + +test_done diff --git a/t/t2060-switch.sh b/t/t2060-switch.sh index f9efa29dfb..2c1b8c0d6d 100755 --- a/t/t2060-switch.sh +++ b/t/t2060-switch.sh @@ -68,6 +68,14 @@ test_expect_success 'new orphan branch from empty' ' test_cmp expected tracked-files ' +test_expect_success 'orphan branch works with --discard-changes' ' + test_when_finished git switch master && + echo foo >foo.txt && + git switch --discard-changes --orphan new-orphan2 && + git ls-files >tracked-files && + test_must_be_empty tracked-files +' + test_expect_success 'switching ignores file of same branch name' ' test_when_finished git switch master && : >first-branch && diff --git a/t/t2070-restore.sh b/t/t2070-restore.sh index 21c3f84459..89e5a142c9 100755 --- a/t/t2070-restore.sh +++ b/t/t2070-restore.sh @@ -69,6 +69,17 @@ test_expect_success 'restore --staged uses HEAD as source' ' test_cmp expected actual ' +test_expect_success 'restore --worktree --staged uses HEAD as source' ' + test_when_finished git reset --hard && + git show HEAD:./first.t >expected && + echo dirty >>first.t && + git add first.t && + git restore --worktree --staged first.t && + git show :./first.t >actual && + test_cmp expected actual && + test_cmp expected first.t +' + test_expect_success 'restore --ignore-unmerged ignores unmerged entries' ' git init unmerged && ( @@ -106,4 +117,21 @@ test_expect_success 'restore --staged adds deleted intent-to-add file back to in git diff --cached --exit-code ' +test_expect_success 'restore --staged invalidates cache tree for deletions' ' + test_when_finished git reset --hard && + >new1 && + >new2 && + git add new1 new2 && + + # It is important to commit and then reset here, so that the index + # contains a valid cache-tree for the "both" tree. + git commit -m both && + git reset --soft HEAD^ && + + git restore --staged new1 && + git commit -m "just new2" && + git rev-parse HEAD:new2 && + test_must_fail git rev-parse HEAD:new1 +' + test_done diff --git a/t/t2072-restore-pathspec-file.sh b/t/t2072-restore-pathspec-file.sh new file mode 100755 index 0000000000..0d47946e8a --- /dev/null +++ b/t/t2072-restore-pathspec-file.sh @@ -0,0 +1,164 @@ +#!/bin/sh + +test_description='restore --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + test_commit file0 && + + echo 1 >fileA.t && + echo 1 >fileB.t && + echo 1 >fileC.t && + echo 1 >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files 1" && + + echo 2 >fileA.t && + echo 2 >fileB.t && + echo 2 >fileC.t && + echo 2 >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files 2" && + + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git status --porcelain --untracked-files=no -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + echo fileA.t | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + echo fileA.t >list && + git restore --pathspec-from-file=list --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + printf "fileA.t\0fileB.t\0" | git restore --pathspec-from-file=- --pathspec-file-nul --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t\n" | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t" | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + printf "fileA.t\r\nfileB.t\r\n" | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git restore --pathspec-from-file=list --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + test_must_fail git restore --pathspec-from-file=list --pathspec-file-nul --source=HEAD^1 +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + printf "fileB.t\nfileC.t\n" | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileB.t + M fileC.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + >empty_list && + + test_must_fail git restore --pathspec-from-file=list --patch --source=HEAD^1 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --patch" err && + + test_must_fail git restore --pathspec-from-file=list --source=HEAD^1 -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git restore --pathspec-file-nul --source=HEAD^1 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + test_must_fail git restore --pathspec-from-file=empty_list --source=HEAD^1 2>err && + test_i18ngrep -e "you must specify path(s) to restore" err +' + +test_done diff --git a/t/t2107-update-index-basic.sh b/t/t2107-update-index-basic.sh index 2242cd098e..a30b7ca6bc 100755 --- a/t/t2107-update-index-basic.sh +++ b/t/t2107-update-index-basic.sh @@ -9,7 +9,6 @@ Tests for command-line parsing and basic operation. test_expect_success 'update-index --nonsense fails' ' test_must_fail git update-index --nonsense 2>msg && - cat msg && test -s msg ' diff --git a/t/t2400-worktree-add.sh b/t/t2400-worktree-add.sh index e819ba741e..5a7495474a 100755 --- a/t/t2400-worktree-add.sh +++ b/t/t2400-worktree-add.sh @@ -438,7 +438,7 @@ test_expect_success 'git worktree add does not match remote' ' cd foo && test_must_fail git config "branch.foo.remote" && test_must_fail git config "branch.foo.merge" && - ! test_cmp_rev refs/remotes/repo_a/foo refs/heads/foo + test_cmp_rev ! refs/remotes/repo_a/foo refs/heads/foo ) ' @@ -483,7 +483,7 @@ test_expect_success 'git worktree --no-guess-remote option overrides config' ' cd foo && test_must_fail git config "branch.foo.remote" && test_must_fail git config "branch.foo.merge" && - ! test_cmp_rev refs/remotes/repo_a/foo refs/heads/foo + test_cmp_rev ! refs/remotes/repo_a/foo refs/heads/foo ) ' @@ -570,6 +570,15 @@ test_expect_success '"add" an existing locked but missing worktree' ' git worktree add --force --force --detach gnoo ' +test_expect_success '"add" not tripped up by magic worktree matching"' ' + # if worktree "sub1/bar" exists, "git worktree add bar" in distinct + # directory `sub2` should not mistakenly complain that `bar` is an + # already-registered worktree + mkdir sub1 sub2 && + git -C sub1 --git-dir=../.git worktree add --detach bozo && + git -C sub2 --git-dir=../.git worktree add --detach bozo +' + test_expect_success FUNNYNAMES 'sanitize generated worktree name' ' git worktree add --detach ". weird*..?.lock.lock" && test -d .git/worktrees/---weird-.- @@ -587,4 +596,28 @@ test_expect_success '"add" should not fail because of another bad worktree' ' ) ' +test_expect_success '"add" with uninitialized submodule, with submodule.recurse unset' ' + test_create_repo submodule && + test_commit -C submodule first && + test_create_repo project && + git -C project submodule add ../submodule && + git -C project add submodule && + test_tick && + git -C project commit -m add_sub && + git clone project project-clone && + git -C project-clone worktree add ../project-2 +' +test_expect_success '"add" with uninitialized submodule, with submodule.recurse set' ' + git -C project-clone -c submodule.recurse worktree add ../project-3 +' + +test_expect_success '"add" with initialized submodule, with submodule.recurse unset' ' + git -C project-clone submodule update --init && + git -C project-clone worktree add ../project-4 +' + +test_expect_success '"add" with initialized submodule, with submodule.recurse set' ' + git -C project-clone -c submodule.recurse worktree add ../project-5 +' + test_done diff --git a/t/t2402-worktree-list.sh b/t/t2402-worktree-list.sh index bb6fb9b12c..52585ec2aa 100755 --- a/t/t2402-worktree-list.sh +++ b/t/t2402-worktree-list.sh @@ -151,4 +151,10 @@ test_expect_success 'linked worktrees are sorted' ' test_cmp expected sorted/main/actual ' +test_expect_success 'worktree path when called in .git directory' ' + git worktree list >list1 && + git -C .git worktree list >list2 && + test_cmp list1 list2 +' + test_done diff --git a/t/t2405-worktree-submodule.sh b/t/t2405-worktree-submodule.sh new file mode 100755 index 0000000000..e1b2bfd87e --- /dev/null +++ b/t/t2405-worktree-submodule.sh @@ -0,0 +1,90 @@ +#!/bin/sh + +test_description='Combination of submodules and multiple worktrees' + +. ./test-lib.sh + +base_path=$(pwd -P) + +test_expect_success 'setup: create origin repos' ' + git init origin/sub && + test_commit -C origin/sub file1 && + git init origin/main && + test_commit -C origin/main first && + git -C origin/main submodule add ../sub && + git -C origin/main commit -m "add sub" && + test_commit -C origin/sub "file1 updated" file1 file1updated file1updated && + git -C origin/main/sub pull && + git -C origin/main add sub && + git -C origin/main commit -m "sub updated" +' + +test_expect_success 'setup: clone superproject to create main worktree' ' + git clone --recursive "$base_path/origin/main" main +' + +rev1_hash_main=$(git --git-dir=origin/main/.git show --pretty=format:%h -q "HEAD~1") +rev1_hash_sub=$(git --git-dir=origin/sub/.git show --pretty=format:%h -q "HEAD~1") + +test_expect_success 'add superproject worktree' ' + git -C main worktree add "$base_path/worktree" "$rev1_hash_main" +' + +test_expect_failure 'submodule is checked out just after worktree add' ' + git -C worktree diff --submodule master"^!" >out && + grep "file1 updated" out +' + +test_expect_success 'add superproject worktree and initialize submodules' ' + git -C main worktree add "$base_path/worktree-submodule-update" "$rev1_hash_main" && + git -C worktree-submodule-update submodule update +' + +test_expect_success 'submodule is checked out just after submodule update in linked worktree' ' + git -C worktree-submodule-update diff --submodule master"^!" >out && + grep "file1 updated" out +' + +test_expect_success 'add superproject worktree and manually add submodule worktree' ' + git -C main worktree add "$base_path/linked_submodule" "$rev1_hash_main" && + git -C main/sub worktree add "$base_path/linked_submodule/sub" "$rev1_hash_sub" +' + +test_expect_success 'submodule is checked out after manually adding submodule worktree' ' + git -C linked_submodule diff --submodule master"^!" >out && + grep "file1 updated" out +' + +test_expect_success 'checkout --recurse-submodules uses $GIT_DIR for submodules in a linked worktree' ' + git -C main worktree add "$base_path/checkout-recurse" --detach && + git -C checkout-recurse submodule update --init && + echo "gitdir: ../../main/.git/worktrees/checkout-recurse/modules/sub" >expect-gitfile && + cat checkout-recurse/sub/.git >actual-gitfile && + test_cmp expect-gitfile actual-gitfile && + git -C main/sub rev-parse HEAD >expect-head-main && + git -C checkout-recurse checkout --recurse-submodules HEAD~1 && + cat checkout-recurse/sub/.git >actual-gitfile && + git -C main/sub rev-parse HEAD >actual-head-main && + test_cmp expect-gitfile actual-gitfile && + test_cmp expect-head-main actual-head-main +' + +test_expect_success 'core.worktree is removed in $GIT_DIR/modules/<name>/config, not in $GIT_COMMON_DIR/modules/<name>/config' ' + echo "../../../sub" >expect-main && + git -C main/sub config --get core.worktree >actual-main && + test_cmp expect-main actual-main && + echo "../../../../../../checkout-recurse/sub" >expect-linked && + git -C checkout-recurse/sub config --get core.worktree >actual-linked && + test_cmp expect-linked actual-linked && + git -C checkout-recurse checkout --recurse-submodules first && + test_expect_code 1 git -C main/.git/worktrees/checkout-recurse/modules/sub config --get core.worktree >linked-config && + test_must_be_empty linked-config && + git -C main/sub config --get core.worktree >actual-main && + test_cmp expect-main actual-main +' + +test_expect_success 'unsetting core.worktree does not prevent running commands directly against the submodule repository' ' + git -C main/.git/worktrees/checkout-recurse/modules/sub log +' + +test_done diff --git a/t/t3000-ls-files-others.sh b/t/t3000-ls-files-others.sh index 0aefadacb0..ffdfb16f58 100755 --- a/t/t3000-ls-files-others.sh +++ b/t/t3000-ls-files-others.sh @@ -91,4 +91,125 @@ test_expect_success SYMLINKS 'ls-files --others with symlinked submodule' ' test_cmp expect actual ' +test_expect_success 'setup nested pathspec search' ' + test_create_repo nested && + ( + cd nested && + + mkdir -p partially_tracked/untracked_dir && + > partially_tracked/content && + > partially_tracked/untracked_dir/file && + + mkdir -p untracked/deep && + > untracked/deep/path && + > untracked/deep/foo.c && + + git add partially_tracked/content + ) +' + +test_expect_success 'ls-files -o --directory with single deep dir pathspec' ' + ( + cd nested && + + git ls-files -o --directory untracked/deep/ >actual && + + cat <<-EOF >expect && + untracked/deep/ + EOF + + test_cmp expect actual + ) +' + +test_expect_success 'ls-files -o --directory with multiple dir pathspecs' ' + ( + cd nested && + + git ls-files -o --directory partially_tracked/ untracked/ >actual && + + cat <<-EOF >expect && + partially_tracked/untracked_dir/ + untracked/ + EOF + + test_cmp expect actual + ) +' + +test_expect_success 'ls-files -o --directory with mix dir/file pathspecs' ' + ( + cd nested && + + git ls-files -o --directory partially_tracked/ untracked/deep/path >actual && + + cat <<-EOF >expect && + partially_tracked/untracked_dir/ + untracked/deep/path + EOF + + test_cmp expect actual + ) +' + +test_expect_success 'ls-files --o --directory with glob filetype match' ' + ( + cd nested && + + # globs kinda defeat --directory, but only for that pathspec + git ls-files --others --directory partially_tracked "untracked/*.c" >actual && + + cat <<-EOF >expect && + partially_tracked/untracked_dir/ + untracked/deep/foo.c + EOF + + test_cmp expect actual + ) +' + +test_expect_success 'ls-files --o --directory with mix of tracked states' ' + ( + cd nested && + + # globs kinda defeat --directory, but only for that pathspec + git ls-files --others --directory partially_tracked/ "untracked/?*" >actual && + + cat <<-EOF >expect && + partially_tracked/untracked_dir/ + untracked/deep/ + EOF + + test_cmp expect actual + ) +' + +test_expect_success 'ls-files --o --directory with glob filetype match only' ' + ( + cd nested && + + git ls-files --others --directory "untracked/*.c" >actual && + + cat <<-EOF >expect && + untracked/deep/foo.c + EOF + + test_cmp expect actual + ) +' + +test_expect_success 'ls-files --o --directory to get immediate paths under one dir only' ' + ( + cd nested && + + git ls-files --others --directory "untracked/?*" >actual && + + cat <<-EOF >expect && + untracked/deep/ + EOF + + test_cmp expect actual + ) +' + test_done diff --git a/t/t3007-ls-files-recurse-submodules.sh b/t/t3007-ls-files-recurse-submodules.sh index 318b5bce7e..4a08000713 100755 --- a/t/t3007-ls-files-recurse-submodules.sh +++ b/t/t3007-ls-files-recurse-submodules.sh @@ -130,7 +130,6 @@ test_expect_success '--recurse-submodules and pathspecs setup' ' git ls-files --recurse-submodules >actual && test_cmp expect actual && - cat actual && git ls-files --recurse-submodules "*" >actual && test_cmp expect actual ' diff --git a/t/t3008-ls-files-lazy-init-name-hash.sh b/t/t3008-ls-files-lazy-init-name-hash.sh index 64f047332b..85f3704958 100755 --- a/t/t3008-ls-files-lazy-init-name-hash.sh +++ b/t/t3008-ls-files-lazy-init-name-hash.sh @@ -4,7 +4,7 @@ test_description='Test the lazy init name hash with various folder structures' . ./test-lib.sh -if test 1 -eq $($GIT_BUILD_DIR/t/helper/test-tool online-cpus) +if test 1 -eq $(test-tool online-cpus) then skip_all='skipping lazy-init tests, single cpu' test_done diff --git a/t/t3011-common-prefixes-and-directory-traversal.sh b/t/t3011-common-prefixes-and-directory-traversal.sh new file mode 100755 index 0000000000..3da5b2b6e7 --- /dev/null +++ b/t/t3011-common-prefixes-and-directory-traversal.sh @@ -0,0 +1,209 @@ +#!/bin/sh + +test_description='directory traversal handling, especially with common prefixes' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit hello && + + >empty && + mkdir untracked_dir && + >untracked_dir/empty && + git init untracked_repo && + >untracked_repo/empty && + + cat <<-EOF >.gitignore && + ignored + an_ignored_dir/ + EOF + mkdir an_ignored_dir && + mkdir an_untracked_dir && + >an_ignored_dir/ignored && + >an_ignored_dir/untracked && + >an_untracked_dir/ignored && + >an_untracked_dir/untracked +' + +test_expect_success 'git ls-files -o shows the right entries' ' + cat <<-EOF >expect && + .gitignore + actual + an_ignored_dir/ignored + an_ignored_dir/untracked + an_untracked_dir/ignored + an_untracked_dir/untracked + empty + expect + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --exclude-standard shows the right entries' ' + cat <<-EOF >expect && + .gitignore + actual + an_untracked_dir/untracked + empty + expect + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o --exclude-standard >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_dir recurses' ' + echo untracked_dir/empty >expect && + git ls-files -o untracked_dir >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_dir/ recurses' ' + echo untracked_dir/empty >expect && + git ls-files -o untracked_dir/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --directory untracked_dir does not recurse' ' + echo untracked_dir/ >expect && + git ls-files -o --directory untracked_dir >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --directory untracked_dir/ does not recurse' ' + echo untracked_dir/ >expect && + git ls-files -o --directory untracked_dir/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_repo does not recurse' ' + echo untracked_repo/ >expect && + git ls-files -o untracked_repo >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_repo/ does not recurse' ' + echo untracked_repo/ >expect && + git ls-files -o untracked_repo/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_dir untracked_repo recurses into untracked_dir only' ' + cat <<-EOF >expect && + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o untracked_dir untracked_repo >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_dir/ untracked_repo/ recurses into untracked_dir only' ' + cat <<-EOF >expect && + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o untracked_dir/ untracked_repo/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --directory untracked_dir untracked_repo does not recurse' ' + cat <<-EOF >expect && + untracked_dir/ + untracked_repo/ + EOF + git ls-files -o --directory untracked_dir untracked_repo >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --directory untracked_dir/ untracked_repo/ does not recurse' ' + cat <<-EOF >expect && + untracked_dir/ + untracked_repo/ + EOF + git ls-files -o --directory untracked_dir/ untracked_repo/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o .git shows nothing' ' + git ls-files -o .git >actual && + test_must_be_empty actual +' + +test_expect_success 'git ls-files -o .git/ shows nothing' ' + git ls-files -o .git/ >actual && + test_must_be_empty actual +' + +test_expect_success FUNNYNAMES 'git ls-files -o untracked_* recurses appropriately' ' + mkdir "untracked_*" && + >"untracked_*/empty" && + + cat <<-EOF >expect && + untracked_*/empty + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o "untracked_*" >actual && + test_cmp expect actual +' + +# It turns out fill_directory returns the right paths, but ls-files' post-call +# filtering in show_dir_entry() via calling dir_path_match() which ends up +# in git_fnmatch() has logic for PATHSPEC_ONESTAR that assumes the pathspec +# must match the full path; it doesn't check it for matching a leading +# directory. +test_expect_failure FUNNYNAMES 'git ls-files -o untracked_*/ recurses appropriately' ' + cat <<-EOF >expect && + untracked_*/empty + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o "untracked_*/" >actual && + test_cmp expect actual +' + +test_expect_success FUNNYNAMES 'git ls-files -o --directory untracked_* does not recurse' ' + cat <<-EOF >expect && + untracked_*/ + untracked_dir/ + untracked_repo/ + EOF + git ls-files -o --directory "untracked_*" >actual && + test_cmp expect actual +' + +test_expect_success FUNNYNAMES 'git ls-files -o --directory untracked_*/ does not recurse' ' + cat <<-EOF >expect && + untracked_*/ + untracked_dir/ + untracked_repo/ + EOF + git ls-files -o --directory "untracked_*/" >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o consistent between one or two dirs' ' + git ls-files -o --exclude-standard an_ignored_dir/ an_untracked_dir/ >tmp && + ! grep ^an_ignored_dir/ tmp >expect && + git ls-files -o --exclude-standard an_ignored_dir/ >actual && + test_cmp expect actual +' + +# ls-files doesn't have a way to request showing both untracked and ignored +# files at the same time, so use `git status --ignored` +test_expect_success 'git status --ignored shows same files under dir with or without pathspec' ' + cat <<-EOF >expect && + ?? an_untracked_dir/ + !! an_untracked_dir/ignored + EOF + git status --porcelain --ignored >output && + grep an_untracked_dir output >expect && + git status --porcelain --ignored an_untracked_dir/ >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index 2170758e38..d48d211a95 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -604,7 +604,7 @@ test_expect_success 'merge removes empty directories' ' git commit -mremoved-d/e && git checkout master && git merge -s recursive rm && - test_must_fail test -d d + test_path_is_missing d ' test_expect_success 'merge-recursive simple w/submodule' ' diff --git a/t/t3033-merge-toplevel.sh b/t/t3033-merge-toplevel.sh index d314599428..e29c284b9b 100755 --- a/t/t3033-merge-toplevel.sh +++ b/t/t3033-merge-toplevel.sh @@ -142,6 +142,17 @@ test_expect_success 'refuse two-project merge by default' ' test_must_fail git merge five ' +test_expect_success 'refuse two-project merge by default, quit before --autostash happens' ' + t3033_reset && + git reset --hard four && + echo change >>one.t && + git diff >expect && + test_must_fail git merge --autostash five 2>err && + test_i18ngrep ! "stash" err && + git diff >actual && + test_cmp expect actual +' + test_expect_success 'two-project merge with --allow-unrelated-histories' ' t3033_reset && git reset --hard four && @@ -149,4 +160,15 @@ test_expect_success 'two-project merge with --allow-unrelated-histories' ' git diff --exit-code five ' +test_expect_success 'two-project merge with --allow-unrelated-histories with --autostash' ' + t3033_reset && + git reset --hard four && + echo change >>one.t && + git diff one.t >expect && + git merge --allow-unrelated-histories --autostash five 2>err && + test_i18ngrep "Applied autostash." err && + git diff one.t >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3035-merge-sparse.sh b/t/t3035-merge-sparse.sh index c4b4a94324..74562e1235 100755 --- a/t/t3035-merge-sparse.sh +++ b/t/t3035-merge-sparse.sh @@ -28,7 +28,7 @@ test_expect_success 'setup' ' git config core.sparseCheckout true && echo "/checked-out" >.git/info/sparse-checkout && git reset --hard && - ! git merge theirs + test_must_fail git merge theirs ' test_expect_success 'reset --hard works after the conflict' ' @@ -42,7 +42,7 @@ test_expect_success 'is reset properly' ' ' test_expect_success 'setup: conflict back' ' - ! git merge theirs + test_must_fail git merge theirs ' test_expect_success 'Merge abort works after the conflict' ' diff --git a/t/t3060-ls-files-with-tree.sh b/t/t3060-ls-files-with-tree.sh index 44f378ce41..52ed665fcd 100755 --- a/t/t3060-ls-files-with-tree.sh +++ b/t/t3060-ls-files-with-tree.sh @@ -47,7 +47,7 @@ test_expect_success setup ' git add . ' -test_expect_success 'git -ls-files --with-tree should succeed from subdir' ' +test_expect_success 'git ls-files --with-tree should succeed from subdir' ' # We have to run from a sub-directory to trigger prune_path # Then we finally get to run our --with-tree test ( @@ -57,7 +57,7 @@ test_expect_success 'git -ls-files --with-tree should succeed from subdir' ' ' test_expect_success \ - 'git -ls-files --with-tree should add entries from named tree.' \ + 'git ls-files --with-tree should add entries from named tree.' \ 'test_cmp expected output' test_done diff --git a/t/t3206-range-diff.sh b/t/t3206-range-diff.sh index 0579cd9969..e024cff65c 100755 --- a/t/t3206-range-diff.sh +++ b/t/t3206-range-diff.sh @@ -8,8 +8,8 @@ test_description='range-diff tests' # harm than good. We need some real history. test_expect_success 'setup' ' - git fast-import < "$TEST_DIRECTORY"/t3206/history.export && - test_oid_cache <<-EOF + git fast-import <"$TEST_DIRECTORY"/t3206/history.export && + test_oid_cache <<-\EOF # topic t1 sha1:4de457d t2 sha1:fccce22 @@ -102,6 +102,14 @@ test_expect_success 'setup' ' n3 sha256:3b0a644 n4 sha256:e461653 + # mode change + o1 sha1:4d39cb3 + o2 sha1:26c107f + o3 sha1:4c1e0f5 + o1 sha256:d0dd598 + o2 sha256:c4a279e + o3 sha256:78459d7 + # added and removed s1 sha1:096b1ba s2 sha1:d92e698 @@ -121,88 +129,88 @@ test_expect_success 'setup' ' test_expect_success 'simple A..B A..C (unmodified)' ' git range-diff --no-color master..topic master..unmodified \ >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid u1) s/5/A/ 2: $(test_oid t2) = 2: $(test_oid u2) s/4/A/ 3: $(test_oid t3) = 3: $(test_oid u3) s/11/B/ 4: $(test_oid t4) = 4: $(test_oid u4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'simple B...C (unmodified)' ' git range-diff --no-color topic...unmodified >actual && - # same "expected" as above - test_cmp expected actual + # same "expect" as above + test_cmp expect actual ' test_expect_success 'simple A B C (unmodified)' ' git range-diff --no-color master topic unmodified >actual && - # same "expected" as above - test_cmp expected actual + # same "expect" as above + test_cmp expect actual ' test_expect_success 'trivial reordering' ' git range-diff --no-color master topic reordered >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid r1) s/5/A/ 3: $(test_oid t3) = 2: $(test_oid r2) s/11/B/ 4: $(test_oid t4) = 3: $(test_oid r3) s/12/B/ 2: $(test_oid t2) = 4: $(test_oid r4) s/4/A/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'removed a commit' ' git range-diff --no-color master topic removed >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid d1) s/5/A/ 2: $(test_oid t2) < -: $(test_oid __) s/4/A/ 3: $(test_oid t3) = 2: $(test_oid d2) s/11/B/ 4: $(test_oid t4) = 3: $(test_oid d3) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'added a commit' ' git range-diff --no-color master topic added >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid a1) s/5/A/ 2: $(test_oid t2) = 2: $(test_oid a2) s/4/A/ -: $(test_oid __) > 3: $(test_oid a3) s/6/A/ 3: $(test_oid t3) = 4: $(test_oid a4) s/11/B/ 4: $(test_oid t4) = 5: $(test_oid a5) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'new base, A B C' ' git range-diff --no-color master topic rebased >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid b1) s/5/A/ 2: $(test_oid t2) = 2: $(test_oid b2) s/4/A/ 3: $(test_oid t3) = 3: $(test_oid b3) s/11/B/ 4: $(test_oid t4) = 4: $(test_oid b4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'new base, B...C' ' # this syntax includes the commits from master! git range-diff --no-color topic...rebased >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && -: $(test_oid __) > 1: $(test_oid b5) unrelated 1: $(test_oid t1) = 2: $(test_oid b1) s/5/A/ 2: $(test_oid t2) = 3: $(test_oid b2) s/4/A/ 3: $(test_oid t3) = 4: $(test_oid b3) s/11/B/ 4: $(test_oid t4) = 5: $(test_oid b4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'changed commit' ' git range-diff --no-color topic...changed >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ @@ -226,23 +234,23 @@ test_expect_success 'changed commit' ' +B 13 EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'changed commit with --no-patch diff option' ' git range-diff --no-color --no-patch topic...changed >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ 4: $(test_oid t4) ! 4: $(test_oid c4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'changed commit with --stat diff option' ' git range-diff --no-color --stat topic...changed >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) @@ -256,12 +264,12 @@ test_expect_success 'changed commit with --stat diff option' ' a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'changed commit with sm config' ' git range-diff --no-color --submodule=log topic...changed >actual && - cat >expected <<-EOF && + cat >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ @@ -285,12 +293,12 @@ test_expect_success 'changed commit with sm config' ' +B 13 EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'renamed file' ' git range-diff --no-color --submodule=log topic...renamed-file >actual && - sed s/Z/\ /g >expected <<-EOF && + sed s/Z/\ /g >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid n1) s/5/A/ 2: $(test_oid t2) ! 2: $(test_oid n2) s/4/A/ @@ Metadata @@ -330,13 +338,13 @@ test_expect_success 'renamed file' ' Z 10 Z B EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'file with mode only change' ' git range-diff --no-color --submodule=log topic...mode-only-change >actual && - sed s/Z/\ /g >expected <<-EOF && - 1: fccce22 ! 1: 4d39cb3 s/4/A/ + sed s/Z/\ /g >expect <<-EOF && + 1: $(test_oid t2) ! 1: $(test_oid o1) s/4/A/ @@ Metadata ZAuthor: Thomas Rast <trast@inf.ethz.ch> Z @@ -352,7 +360,7 @@ test_expect_success 'file with mode only change' ' Z 7 + + ## other-file (new) ## - 2: 147e64e ! 2: 26c107f s/11/B/ + 2: $(test_oid t3) ! 2: $(test_oid o2) s/11/B/ @@ Metadata ZAuthor: Thomas Rast <trast@inf.ethz.ch> Z @@ -368,14 +376,14 @@ test_expect_success 'file with mode only change' ' Z 14 + + ## other-file (mode change 100644 => 100755) ## - 3: a63e992 = 3: 4c1e0f5 s/12/B/ + 3: $(test_oid t4) = 3: $(test_oid o3) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'file added and later removed' ' git range-diff --no-color --submodule=log topic...added-removed >actual && - sed s/Z/\ /g >expected <<-EOF && + sed s/Z/\ /g >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid s1) s/5/A/ 2: $(test_oid t2) ! 2: $(test_oid s2) s/4/A/ @@ Metadata @@ -411,7 +419,7 @@ test_expect_success 'file added and later removed' ' + ## new-file (deleted) ## 4: $(test_oid t4) = 4: $(test_oid s4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'no commits on one side' ' @@ -421,7 +429,7 @@ test_expect_success 'no commits on one side' ' test_expect_success 'changed message' ' git range-diff --no-color topic...changed-message >actual && - sed s/Z/\ /g >expected <<-EOF && + sed s/Z/\ /g >expect <<-EOF && 1: $(test_oid t1) = 1: $(test_oid m1) s/5/A/ 2: $(test_oid t2) ! 2: $(test_oid m2) s/4/A/ @@ Metadata @@ -436,7 +444,7 @@ test_expect_success 'changed message' ' 3: $(test_oid t3) = 3: $(test_oid m3) s/11/B/ 4: $(test_oid t4) = 4: $(test_oid m4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'dual-coloring' ' @@ -505,4 +513,212 @@ test_expect_success 'range-diff overrides diff.noprefix internally' ' git -c diff.noprefix=true range-diff HEAD^... ' +test_expect_success 'basic with modified format.pretty with suffix' ' + git -c format.pretty="format:commit %H%d%n" range-diff \ + master..topic master..unmodified +' + +test_expect_success 'basic with modified format.pretty without "commit "' ' + git -c format.pretty="format:%H%n" range-diff \ + master..topic master..unmodified +' + +test_expect_success 'range-diff compares notes by default' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git range-diff --no-color master..topic master..unmodified \ + >actual && + sed s/Z/\ /g >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid u1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid u2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid u3) s/11/B/ + 4: $(test_oid t4) ! 4: $(test_oid u4) s/12/B/ + @@ Commit message + Z + Z + Z ## Notes ## + - topic note + + unmodified note + Z + Z ## file ## + Z@@ file: A + EOF + test_cmp expect actual +' + +test_expect_success 'range-diff with --no-notes' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git range-diff --no-color --no-notes master..topic master..unmodified \ + >actual && + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid u1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid u2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid u3) s/11/B/ + 4: $(test_oid t4) = 4: $(test_oid u4) s/12/B/ + EOF + test_cmp expect actual +' + +test_expect_success 'range-diff with multiple --notes' ' + git notes --ref=note1 add -m "topic note1" topic && + git notes --ref=note1 add -m "unmodified note1" unmodified && + test_when_finished git notes --ref=note1 remove topic unmodified && + git notes --ref=note2 add -m "topic note2" topic && + git notes --ref=note2 add -m "unmodified note2" unmodified && + test_when_finished git notes --ref=note2 remove topic unmodified && + git range-diff --no-color --notes=note1 --notes=note2 master..topic master..unmodified \ + >actual && + sed s/Z/\ /g >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid u1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid u2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid u3) s/11/B/ + 4: $(test_oid t4) ! 4: $(test_oid u4) s/12/B/ + @@ Commit message + Z + Z + Z ## Notes (note1) ## + - topic note1 + + unmodified note1 + Z + Z + Z ## Notes (note2) ## + - topic note2 + + unmodified note2 + Z + Z ## file ## + Z@@ file: A + EOF + test_cmp expect actual +' + +test_expect_success 'format-patch --range-diff does not compare notes by default' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git format-patch --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "= 4: .* s/12/B" 0000-* && + ! grep "Notes" 0000-* && + ! grep "note" 0000-* +' + +test_expect_success 'format-patch --range-diff with --no-notes' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git format-patch --no-notes --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "= 4: .* s/12/B" 0000-* && + ! grep "Notes" 0000-* && + ! grep "note" 0000-* +' + +test_expect_success 'format-patch --range-diff with --notes' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git format-patch --notes --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "! 4: .* s/12/B" 0000-* && + sed s/Z/\ /g >expect <<-EOF && + @@ Commit message + Z + Z + Z ## Notes ## + - topic note + + unmodified note + Z + Z ## file ## + Z@@ file: A + EOF + sed "/@@ Commit message/,/@@ file: A/!d" 0000-* >actual && + test_cmp expect actual +' + +test_expect_success 'format-patch --range-diff with format.notes config' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + test_config format.notes true && + git format-patch --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "! 4: .* s/12/B" 0000-* && + sed s/Z/\ /g >expect <<-EOF && + @@ Commit message + Z + Z + Z ## Notes ## + - topic note + + unmodified note + Z + Z ## file ## + Z@@ file: A + EOF + sed "/@@ Commit message/,/@@ file: A/!d" 0000-* >actual && + test_cmp expect actual +' + +test_expect_success 'format-patch --range-diff with multiple notes' ' + git notes --ref=note1 add -m "topic note1" topic && + git notes --ref=note1 add -m "unmodified note1" unmodified && + test_when_finished git notes --ref=note1 remove topic unmodified && + git notes --ref=note2 add -m "topic note2" topic && + git notes --ref=note2 add -m "unmodified note2" unmodified && + test_when_finished git notes --ref=note2 remove topic unmodified && + git format-patch --notes=note1 --notes=note2 --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "! 4: .* s/12/B" 0000-* && + sed s/Z/\ /g >expect <<-EOF && + @@ Commit message + Z + Z + Z ## Notes (note1) ## + - topic note1 + + unmodified note1 + Z + Z + Z ## Notes (note2) ## + - topic note2 + + unmodified note2 + Z + Z ## file ## + Z@@ file: A + EOF + sed "/@@ Commit message/,/@@ file: A/!d" 0000-* >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3210-pack-refs.sh b/t/t3210-pack-refs.sh index 9ea5fa4fd2..f41b2afb99 100755 --- a/t/t3210-pack-refs.sh +++ b/t/t3210-pack-refs.sh @@ -240,7 +240,7 @@ test_expect_success 'retry acquiring packed-refs.lock' ' test_expect_success SYMLINKS 'pack symlinked packed-refs' ' # First make sure that symlinking works when reading: - git update-ref refs/heads/loosy refs/heads/master && + git update-ref refs/heads/lossy refs/heads/master && git for-each-ref >all-refs-before && mv .git/packed-refs .git/my-deviant-packed-refs && ln -s my-deviant-packed-refs .git/packed-refs && diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh index d3fa298c6a..8f43303007 100755 --- a/t/t3301-notes.sh +++ b/t/t3301-notes.sh @@ -54,7 +54,9 @@ test_expect_success 'create notes' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b4" = "$(git notes show)" && + echo b4 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' @@ -79,14 +81,21 @@ test_expect_success 'edit existing notes' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b3" = "$(git notes show)" && + echo b3 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'show notes from treeish' ' - test "b3" = "$(git notes --ref commits^{tree} show)" && - test "b4" = "$(git notes --ref commits@{1} show)" + echo b3 >expect && + git notes --ref commits^{tree} show >actual && + test_cmp expect actual && + + echo b4 >expect && + git notes --ref commits@{1} show >actual && + test_cmp expect actual ' test_expect_success 'cannot edit notes from non-ref' ' @@ -99,7 +108,9 @@ test_expect_success 'cannot "git notes add -m" where notes already exists' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b3" = "$(git notes show)" && + echo b3 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' @@ -109,7 +120,9 @@ test_expect_success 'can overwrite existing note with "git notes add -f -m"' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b1" = "$(git notes show)" && + echo b1 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' @@ -119,7 +132,9 @@ test_expect_success 'add w/no options on existing note morphs into edit' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b2" = "$(git notes show)" && + echo b2 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' @@ -129,7 +144,9 @@ test_expect_success 'can overwrite existing note with "git notes add -f"' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b1" = "$(git notes show)" && + echo b1 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' @@ -146,7 +163,8 @@ test_expect_success 'show notes' ' Notes: ${indent}b1 EOF - ! (git cat-file commit HEAD | grep b1) && + git cat-file commit HEAD >commits && + ! grep b1 commits && git log -1 >actual && test_cmp expect actual ' @@ -472,9 +490,11 @@ test_expect_success 'removing with --stdin --ignore-missing' ' test_expect_success 'list notes with "git notes list"' ' commit_2=$(git rev-parse 2nd) && commit_3=$(git rev-parse 3rd) && + note_2=$(git rev-parse refs/notes/commits:$commit_2) && + note_3=$(git rev-parse refs/notes/commits:$commit_3) && sort -t" " -k2 >expect <<-EOF && - $(git rev-parse refs/notes/commits:$commit_2) $commit_2 - $(git rev-parse refs/notes/commits:$commit_3) $commit_3 + $note_2 $commit_2 + $note_3 $commit_3 EOF git notes list >actual && test_cmp expect actual @@ -486,9 +506,7 @@ test_expect_success 'list notes with "git notes"' ' ' test_expect_success 'list specific note with "git notes list <object>"' ' - cat >expect <<-EOF && - $(git rev-parse refs/notes/commits:$commit_3) - EOF + git rev-parse refs/notes/commits:$commit_3 >expect && git notes list HEAD^^ >actual && test_cmp expect actual ' @@ -512,10 +530,11 @@ test_expect_success 'append to existing note with "git notes append"' ' test_expect_success '"git notes list" does not expand to "git notes list HEAD"' ' commit_5=$(git rev-parse 5th) && + note_5=$(git rev-parse refs/notes/commits:$commit_5) && sort -t" " -k2 >expect_list <<-EOF && - $(git rev-parse refs/notes/commits:$commit_2) $commit_2 - $(git rev-parse refs/notes/commits:$commit_3) $commit_3 - $(git rev-parse refs/notes/commits:$commit_5) $commit_5 + $note_2 $commit_2 + $note_3 $commit_3 + $note_5 $commit_5 EOF git notes list >actual && test_cmp expect_list actual @@ -721,7 +740,8 @@ test_expect_success 'Allow notes on non-commits (trees, blobs, tags)' ' git notes show HEAD: >actual && test_cmp expect actual && echo "Note on a blob" >expect && - filename=$(git ls-tree --name-only HEAD | head -n1) && + git ls-tree --name-only HEAD >files && + filename=$(head -n1 files) && git notes add -m "Note on a blob" HEAD:$filename && git notes show HEAD:$filename >actual && test_cmp expect actual && @@ -745,10 +765,13 @@ test_expect_success 'create note from other note with "git notes add -C"' ' Notes: ${indent}order test EOF - git notes add -C $(git notes list HEAD^) && + note=$(git notes list HEAD^) && + git notes add -C $note && git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD^)" + git notes list HEAD^ >expect && + git notes list HEAD >actual && + test_cmp expect actual ' test_expect_success 'create note from non-existing note with "git notes add -C" fails' ' @@ -777,11 +800,12 @@ test_expect_success 'create note from blob with "git notes add -C" reuses blob i Notes: ${indent}This is a blob object EOF - blob=$(echo "This is a blob object" | git hash-object -w --stdin) && - git notes add -C $blob && + echo "This is a blob object" | git hash-object -w --stdin >blob && + git notes add -C $(cat blob) && git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$blob" + git notes list HEAD >actual && + test_cmp blob actual ' test_expect_success 'create note from other note with "git notes add -c"' ' @@ -797,7 +821,8 @@ test_expect_success 'create note from other note with "git notes add -c"' ' Notes: ${indent}yet another note EOF - MSG="yet another note" git notes add -c $(git notes list HEAD^^) && + note=$(git notes list HEAD^^) && + MSG="yet another note" git notes add -c $note && git log -1 >actual && test_cmp expect actual ' @@ -822,7 +847,8 @@ test_expect_success 'append to note from other note with "git notes append -C"' ${indent} ${indent}yet another note EOF - git notes append -C $(git notes list HEAD^) HEAD^ && + note=$(git notes list HEAD^) && + git notes append -C $note HEAD^ && git log -1 HEAD^ >actual && test_cmp expect actual ' @@ -839,7 +865,8 @@ test_expect_success 'create note from other note with "git notes append -c"' ' Notes: ${indent}other note EOF - MSG="other note" git notes append -c $(git notes list HEAD^) && + note=$(git notes list HEAD^) && + MSG="other note" git notes append -c $note && git log -1 >actual && test_cmp expect actual ' @@ -858,12 +885,33 @@ test_expect_success 'append to note from other note with "git notes append -c"' ${indent} ${indent}yet another note EOF - MSG="yet another note" git notes append -c $(git notes list HEAD) && + note=$(git notes list HEAD) && + MSG="yet another note" git notes append -c $note && git log -1 >actual && test_cmp expect actual ' test_expect_success 'copy note with "git notes copy"' ' + commit=$(git rev-parse 4th) && + cat >expect <<-EOF && + commit $commit + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 + + ${indent}4th + + Notes: + ${indent}This is a blob object + EOF + git notes copy 8th 4th && + git log 3rd..4th >actual && + test_cmp expect actual && + git notes list 4th >expect && + git notes list 8th >actual && + test_cmp expect actual +' + +test_expect_success 'copy note with "git notes copy" with default' ' test_commit 11th && commit=$(git rev-parse HEAD) && cat >expect <<-EOF && @@ -878,17 +926,33 @@ test_expect_success 'copy note with "git notes copy"' ' ${indent} ${indent}yet another note EOF - git notes copy HEAD^ HEAD && + git notes copy HEAD^ && git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD^)" + git notes list HEAD^ >expect && + git notes list HEAD >actual && + test_cmp expect actual ' test_expect_success 'prevent overwrite with "git notes copy"' ' test_must_fail git notes copy HEAD~2 HEAD && + cat >expect <<-EOF && + commit $commit + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:23:13 2005 -0700 + + ${indent}11th + + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD^)" + git notes list HEAD^ >expect && + git notes list HEAD >actual && + test_cmp expect actual ' test_expect_success 'allow overwrite with "git notes copy -f"' ' @@ -901,14 +965,36 @@ test_expect_success 'allow overwrite with "git notes copy -f"' ' ${indent}11th Notes: + ${indent}This is a blob object + EOF + git notes copy -f HEAD~3 HEAD && + git log -1 >actual && + test_cmp expect actual && + git notes list HEAD~3 >expect && + git notes list HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'allow overwrite with "git notes copy -f" with default' ' + commit=$(git rev-parse HEAD) && + cat >expect <<-EOF && + commit $commit + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:23:13 2005 -0700 + + ${indent}11th + + Notes: ${indent}yet another note ${indent} ${indent}yet another note EOF - git notes copy -f HEAD~2 HEAD && + git notes copy -f HEAD~2 && git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" + git notes list HEAD~2 >expect && + git notes list HEAD >actual && + test_cmp expect actual ' test_expect_success 'cannot copy note from object without notes' ' @@ -943,13 +1029,21 @@ test_expect_success 'git notes copy --stdin' ' ${indent} ${indent}yet another note EOF - (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^) && - echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | - git notes copy --stdin && + from=$(git rev-parse HEAD~3) && + to=$(git rev-parse HEAD^) && + echo "$from" "$to" >copy && + from=$(git rev-parse HEAD~2) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >>copy && + git notes copy --stdin <copy && git log -2 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" && - test "$(git notes list HEAD^)" = "$(git notes list HEAD~3)" + git notes list HEAD~2 >expect && + git notes list HEAD >actual && + test_cmp expect actual && + git notes list HEAD~3 >expect && + git notes list HEAD^ >actual && + test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' @@ -970,9 +1064,13 @@ test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' ${indent}14th EOF - (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^) && - echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD~3) && + to=$(git rev-parse HEAD^) && + echo "$from" "$to" >copy && + from=$(git rev-parse HEAD~2) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >>copy && + git notes copy --for-rewrite=foo <copy && git log -2 >actual && test_cmp expect actual ' @@ -1005,17 +1103,23 @@ test_expect_success 'git notes copy --for-rewrite (enabled)' ' EOF test_config notes.rewriteMode overwrite && test_config notes.rewriteRef "refs/notes/*" && - (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^) && - echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD~3) && + to=$(git rev-parse HEAD^) && + echo "$from" "$to" >copy && + from=$(git rev-parse HEAD~2) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >>copy && + git notes copy --for-rewrite=foo <copy && git log -2 >actual && test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (disabled)' ' test_config notes.rewrite.bar false && - echo $(git rev-parse HEAD~3) $(git rev-parse HEAD) | - git notes copy --for-rewrite=bar && + from=$(git rev-parse HEAD~3) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=bar <copy && git log -2 >actual && test_cmp expect actual ' @@ -1035,8 +1139,10 @@ test_expect_success 'git notes copy --for-rewrite (overwrite)' ' git notes add -f -m"a fresh note" HEAD^ && test_config notes.rewriteMode overwrite && test_config notes.rewriteRef "refs/notes/*" && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1044,8 +1150,10 @@ test_expect_success 'git notes copy --for-rewrite (overwrite)' ' test_expect_success 'git notes copy --for-rewrite (ignore)' ' test_config notes.rewriteMode ignore && test_config notes.rewriteRef "refs/notes/*" && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1067,8 +1175,10 @@ test_expect_success 'git notes copy --for-rewrite (append)' ' git notes add -f -m"another fresh note" HEAD^ && test_config notes.rewriteMode concatenate && test_config notes.rewriteRef "refs/notes/*" && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1095,9 +1205,13 @@ test_expect_success 'git notes copy --for-rewrite (append two to one)' ' git notes add -f -m"append 2" HEAD^^ && test_config notes.rewriteMode concatenate && test_config notes.rewriteRef "refs/notes/*" && - (echo $(git rev-parse HEAD^) $(git rev-parse HEAD) && - echo $(git rev-parse HEAD^^) $(git rev-parse HEAD)) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + from=$(git rev-parse HEAD^^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >>copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1106,8 +1220,10 @@ test_expect_success 'git notes copy --for-rewrite (append empty)' ' git notes remove HEAD^ && test_config notes.rewriteMode concatenate && test_config notes.rewriteRef "refs/notes/*" && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1127,8 +1243,10 @@ test_expect_success 'GIT_NOTES_REWRITE_MODE works' ' test_config notes.rewriteMode concatenate && test_config notes.rewriteRef "refs/notes/*" && git notes add -f -m"replacement note 1" HEAD^ && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - GIT_NOTES_REWRITE_MODE=overwrite git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + GIT_NOTES_REWRITE_MODE=overwrite git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1148,9 +1266,11 @@ test_expect_success 'GIT_NOTES_REWRITE_REF works' ' git notes add -f -m"replacement note 2" HEAD^ && test_config notes.rewriteMode overwrite && test_unconfig notes.rewriteRef && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && GIT_NOTES_REWRITE_REF=refs/notes/commits:refs/notes/other \ - git notes copy --for-rewrite=foo && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1159,41 +1279,55 @@ test_expect_success 'GIT_NOTES_REWRITE_REF overrides config' ' git notes add -f -m"replacement note 3" HEAD^ && test_config notes.rewriteMode overwrite && test_config notes.rewriteRef refs/notes/other && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && GIT_NOTES_REWRITE_REF=refs/notes/commits \ - git notes copy --for-rewrite=foo && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && grep "replacement note 3" actual ' test_expect_success 'git notes copy diagnoses too many or too few parameters' ' - test_must_fail git notes copy && - test_must_fail git notes copy one two three + test_must_fail git notes copy 2>error && + test_i18ngrep "too few parameters" error && + test_must_fail git notes copy one two three 2>error && + test_i18ngrep "too many parameters" error ' test_expect_success 'git notes get-ref expands refs/heads/master to refs/notes/refs/heads/master' ' test_unconfig core.notesRef && sane_unset GIT_NOTES_REF && - test "$(git notes --ref=refs/heads/master get-ref)" = "refs/notes/refs/heads/master" + echo refs/notes/refs/heads/master >expect && + git notes --ref=refs/heads/master get-ref >actual && + test_cmp expect actual ' test_expect_success 'git notes get-ref (no overrides)' ' test_unconfig core.notesRef && sane_unset GIT_NOTES_REF && - test "$(git notes get-ref)" = "refs/notes/commits" + echo refs/notes/commits >expect && + git notes get-ref >actual && + test_cmp expect actual ' test_expect_success 'git notes get-ref (core.notesRef)' ' test_config core.notesRef refs/notes/foo && - test "$(git notes get-ref)" = "refs/notes/foo" + echo refs/notes/foo >expect && + git notes get-ref >actual && + test_cmp expect actual ' test_expect_success 'git notes get-ref (GIT_NOTES_REF)' ' - test "$(GIT_NOTES_REF=refs/notes/bar git notes get-ref)" = "refs/notes/bar" + echo refs/notes/bar >expect && + GIT_NOTES_REF=refs/notes/bar git notes get-ref >actual && + test_cmp expect actual ' test_expect_success 'git notes get-ref (--ref)' ' - test "$(GIT_NOTES_REF=refs/notes/bar git notes --ref=baz get-ref)" = "refs/notes/baz" + echo refs/notes/baz >expect && + GIT_NOTES_REF=refs/notes/bar git notes --ref=baz get-ref >actual && + test_cmp expect actual ' test_expect_success 'setup testing of empty notes' ' diff --git a/t/t3305-notes-fanout.sh b/t/t3305-notes-fanout.sh index 831f83d211..3b4753e1b4 100755 --- a/t/t3305-notes-fanout.sh +++ b/t/t3305-notes-fanout.sh @@ -4,6 +4,38 @@ test_description='Test that adding/removing many notes triggers automatic fanout . ./test-lib.sh +path_has_fanout() { + path=$1 && + fanout=$2 && + after_last_slash=$((40 - $fanout * 2)) && + echo $path | grep -q "^\([0-9a-f]\{2\}/\)\{$fanout\}[0-9a-f]\{$after_last_slash\}$" +} + +touched_one_note_with_fanout() { + notes_commit=$1 && + modification=$2 && # 'A' for addition, 'D' for deletion + fanout=$3 && + diff=$(git diff-tree --no-commit-id --name-status --root -r $notes_commit) && + path=$(echo $diff | sed -e "s/^$modification[\t ]//") && + path_has_fanout "$path" $fanout; +} + +all_notes_have_fanout() { + notes_commit=$1 && + fanout=$2 && + git ls-tree -r --name-only $notes_commit 2>/dev/null | + while read path + do + path_has_fanout $path $fanout || return 1 + done +} + +test_expect_success 'tweak test environment' ' + git checkout -b nondeterminism && + test_commit A && + git checkout --orphan with_notes; +' + test_expect_success 'creating many notes with git-notes' ' num_notes=300 && i=0 && @@ -20,7 +52,7 @@ test_expect_success 'creating many notes with git-notes' ' test_expect_success 'many notes created correctly with git-notes' ' git log | grep "^ " > output && - i=300 && + i=$num_notes && while test $i -gt 0 do echo " commit #$i" && @@ -30,34 +62,46 @@ test_expect_success 'many notes created correctly with git-notes' ' test_cmp expect output ' -test_expect_success 'many notes created with git-notes triggers fanout' ' - # Expect entire notes tree to have a fanout == 1 - git ls-tree -r --name-only refs/notes/commits | - while read path +test_expect_success 'stable fanout 0 is followed by stable fanout 1' ' + i=$num_notes && + fanout=0 && + while test $i -gt 0 do - echo $path | grep "^../[0-9a-f]*$" || { - echo "Invalid path \"$path\"" && - return 1; - } - done + i=$(($i - 1)) && + if touched_one_note_with_fanout refs/notes/commits~$i A $fanout + then + continue + elif test $fanout -eq 0 + then + fanout=1 && + if all_notes_have_fanout refs/notes/commits~$i $fanout + then + echo "Fanout 0 -> 1 at refs/notes/commits~$i" && + continue + fi + fi && + echo "Failed fanout=$fanout check at refs/notes/commits~$i" && + git ls-tree -r --name-only refs/notes/commits~$i && + return 1 + done && + all_notes_have_fanout refs/notes/commits 1 ' test_expect_success 'deleting most notes with git-notes' ' - num_notes=250 && + remove_notes=285 && i=0 && git rev-list HEAD | - while test $i -lt $num_notes && read sha1 + while test $i -lt $remove_notes && read sha1 do i=$(($i + 1)) && test_tick && - git notes remove "$sha1" || - exit 1 + git notes remove "$sha1" 2>/dev/null || return 1 done ' test_expect_success 'most notes deleted correctly with git-notes' ' - git log HEAD~250 | grep "^ " > output && - i=50 && + git log HEAD~$remove_notes | grep "^ " > output && + i=$(($num_notes - $remove_notes)) && while test $i -gt 0 do echo " commit #$i" && @@ -67,16 +111,29 @@ test_expect_success 'most notes deleted correctly with git-notes' ' test_cmp expect output ' -test_expect_success 'deleting most notes triggers fanout consolidation' ' - # Expect entire notes tree to have a fanout == 0 - git ls-tree -r --name-only refs/notes/commits | - while read path +test_expect_success 'stable fanout 1 is followed by stable fanout 0' ' + i=$remove_notes && + fanout=1 && + while test $i -gt 0 do - echo $path | grep -v "^../.*" || { - echo "Invalid path \"$path\"" && - return 1; - } - done + i=$(($i - 1)) && + if touched_one_note_with_fanout refs/notes/commits~$i D $fanout + then + continue + elif test $fanout -eq 1 + then + fanout=0 && + if all_notes_have_fanout refs/notes/commits~$i $fanout + then + echo "Fanout 1 -> 0 at refs/notes/commits~$i" && + continue + fi + fi && + echo "Failed fanout=$fanout check at refs/notes/commits~$i" && + git ls-tree -r --name-only refs/notes/commits~$i && + return 1 + done && + all_notes_have_fanout refs/notes/commits 0 ' test_done diff --git a/t/t3308-notes-merge.sh b/t/t3308-notes-merge.sh index d60588ec8f..790e292966 100755 --- a/t/t3308-notes-merge.sh +++ b/t/t3308-notes-merge.sh @@ -20,7 +20,34 @@ test_expect_success setup ' git notes add -m "Notes on 3rd commit" 3rd && git notes add -m "Notes on 4th commit" 4th && # Copy notes to remote-notes - git fetch . refs/notes/*:refs/remote-notes/origin/* + git fetch . refs/notes/*:refs/remote-notes/origin/* && + + test_oid_init && + test_oid_cache <<-EOF + hash4a sha1:5e93d24084d32e1cb61f7070505b9d2530cca987 + hash3a sha1:8366731eeee53787d2bdf8fc1eff7d94757e8da0 + hash2a sha1:eede89064cd42441590d6afec6c37b321ada3389 + hash1a sha1:daa55ffad6cb99bf64226532147ffcaf5ce8bdd1 + hash5b sha1:0f2efbd00262f2fd41dfae33df8765618eeacd99 + hash4b sha1:dec2502dac3ea161543f71930044deff93fa945c + hash3b sha1:4069cdb399fd45463ec6eef8e051a16a03592d91 + hash2c sha1:d000d30e6ddcfce3a8122c403226a2ce2fd04d9d + hash1c sha1:43add6bd0c8c0bc871ac7991e0f5573cfba27804 + hash4d sha1:1f257a3a90328557c452f0817d6cc50c89d315d4 + hash3d sha1:05a4927951bcef347f51486575b878b2b60137f2 + + hash4a sha256:eef876be1d32ac2e2e42240e0429325cec116e55e88cb2969899fac695aa762f + hash3a sha256:cf7cd1bc091d7ba4166a86df864110e42087cd893a5ae96bc50d637e0290939d + hash2a sha256:21ddde7ebce2c285213898cb04deca0fd3209610cf7aaf8222e4e2f45262fae2 + hash1a sha256:f9fe0eda16c6027732ed9d4295689a03abd16f893be69b3dcbf4037ddb191921 + hash5b sha256:20046f2244577797a9e3d3f790ea9eca4d8a6bafb2a5570bcb0e03aa02ce100b + hash4b sha256:f90563d134c61a95bb88afbd45d48ccc9e919c62aa6fbfcd483302b3e4d8dbcb + hash3b sha256:988f2aca9f2d87e93e6a73197c2bb99560cc44a2f92d18653968f956f01221e0 + hash2c sha256:84153b777b4d42827a756c6578dcdb59d8ae5d1360b874fb37c430150c825c26 + hash1c sha256:9beb2bc4eef72e4c4087be168a20573e34d993d9ab1883055f23e322afa06567 + hash4d sha256:32de39dc06e679a7abb2d4a55ede7709b3124340a4a90aa305971b1c72ac319d + hash3d sha256:fa73b20e41cbb7541c4c81d1535016131dbfbeb05bf6a71f6115e9cad31c7af5 + EOF ' commit_sha1=$(git rev-parse 1st^{commit}) @@ -40,10 +67,10 @@ verify_notes () { } cat <<EOF | sort >expect_notes_x -5e93d24084d32e1cb61f7070505b9d2530cca987 $commit_sha4 -8366731eeee53787d2bdf8fc1eff7d94757e8da0 $commit_sha3 -eede89064cd42441590d6afec6c37b321ada3389 $commit_sha2 -daa55ffad6cb99bf64226532147ffcaf5ce8bdd1 $commit_sha1 +$(test_oid hash4a) $commit_sha4 +$(test_oid hash3a) $commit_sha3 +$(test_oid hash2a) $commit_sha2 +$(test_oid hash1a) $commit_sha1 EOF cat >expect_log_x <<EOF @@ -126,10 +153,10 @@ test_expect_success 'merge previous notes commit (y^ => y) => No-op' ' ' cat <<EOF | sort >expect_notes_y -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -dec2502dac3ea161543f71930044deff93fa945c $commit_sha4 -4069cdb399fd45463ec6eef8e051a16a03592d91 $commit_sha3 -daa55ffad6cb99bf64226532147ffcaf5ce8bdd1 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4b) $commit_sha4 +$(test_oid hash3b) $commit_sha3 +$(test_oid hash1a) $commit_sha1 EOF cat >expect_log_y <<EOF @@ -193,11 +220,11 @@ test_expect_success 'merge empty notes ref (z => y)' ' ' cat <<EOF | sort >expect_notes_y -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -dec2502dac3ea161543f71930044deff93fa945c $commit_sha4 -4069cdb399fd45463ec6eef8e051a16a03592d91 $commit_sha3 -d000d30e6ddcfce3a8122c403226a2ce2fd04d9d $commit_sha2 -43add6bd0c8c0bc871ac7991e0f5573cfba27804 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4b) $commit_sha4 +$(test_oid hash3b) $commit_sha3 +$(test_oid hash2c) $commit_sha2 +$(test_oid hash1c) $commit_sha1 EOF cat >expect_log_y <<EOF @@ -231,9 +258,9 @@ test_expect_success 'change notes on other notes ref (y)' ' ' cat <<EOF | sort >expect_notes_x -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -1f257a3a90328557c452f0817d6cc50c89d315d4 $commit_sha4 -daa55ffad6cb99bf64226532147ffcaf5ce8bdd1 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4d) $commit_sha4 +$(test_oid hash1a) $commit_sha1 EOF cat >expect_log_x <<EOF @@ -262,10 +289,10 @@ test_expect_success 'change notes on notes ref (x)' ' ' cat <<EOF | sort >expect_notes_x -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -1f257a3a90328557c452f0817d6cc50c89d315d4 $commit_sha4 -d000d30e6ddcfce3a8122c403226a2ce2fd04d9d $commit_sha2 -43add6bd0c8c0bc871ac7991e0f5573cfba27804 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4d) $commit_sha4 +$(test_oid hash2c) $commit_sha2 +$(test_oid hash1c) $commit_sha1 EOF cat >expect_log_x <<EOF @@ -296,8 +323,8 @@ test_expect_success 'merge y into x => Non-conflicting 3-way merge' ' ' cat <<EOF | sort >expect_notes_w -05a4927951bcef347f51486575b878b2b60137f2 $commit_sha3 -d000d30e6ddcfce3a8122c403226a2ce2fd04d9d $commit_sha2 +$(test_oid hash3d) $commit_sha3 +$(test_oid hash2c) $commit_sha2 EOF cat >expect_log_w <<EOF @@ -326,11 +353,11 @@ test_expect_success 'create notes on new, separate notes ref (w)' ' ' cat <<EOF | sort >expect_notes_x -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -1f257a3a90328557c452f0817d6cc50c89d315d4 $commit_sha4 -05a4927951bcef347f51486575b878b2b60137f2 $commit_sha3 -d000d30e6ddcfce3a8122c403226a2ce2fd04d9d $commit_sha2 -43add6bd0c8c0bc871ac7991e0f5573cfba27804 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4d) $commit_sha4 +$(test_oid hash3d) $commit_sha3 +$(test_oid hash2c) $commit_sha2 +$(test_oid hash1c) $commit_sha1 EOF cat >expect_log_x <<EOF diff --git a/t/t3309-notes-merge-auto-resolve.sh b/t/t3309-notes-merge-auto-resolve.sh index 14c2adf970..141d3e4ca4 100755 --- a/t/t3309-notes-merge-auto-resolve.sh +++ b/t/t3309-notes-merge-auto-resolve.sh @@ -23,7 +23,67 @@ test_expect_success 'setup commits' ' test_commit 12th && test_commit 13th && test_commit 14th && - test_commit 15th + test_commit 15th && + + test_oid_cache <<-EOF + hash15a sha1:457a85d6c814ea208550f15fcc48f804ac8dc023 + hash14a sha1:b0c95b954301d69da2bc3723f4cb1680d355937c + hash13a sha1:5d30216a129eeffa97d9694ffe8c74317a560315 + hash12a sha1:dd161bc149470fd890dd4ab52a4cbd79bbd18c36 + hash11a sha1:7abbc45126d680336fb24294f013a7cdfa3ed545 + hash10a sha1:b8d03e173f67f6505a76f6e00cf93440200dd9be + hash09a sha1:20c613c835011c48a5abe29170a2402ca6354910 + hash08a sha1:a3daf8a1e4e5dc3409a303ad8481d57bfea7f5d6 + hash07a sha1:897003322b53bc6ca098e9324ee508362347e734 + hash06a sha1:11d97fdebfa5ceee540a3da07bce6fa0222bc082 + hash15b sha1:68b8630d25516028bed862719855b3d6768d7833 + hash14b sha1:5de7ea7ad4f47e7ff91989fb82234634730f75df + hash13b sha1:3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc + hash12b sha1:a66055fa82f7a03fe0c02a6aba3287a85abf7c62 + hash05b sha1:154508c7a0bcad82b6fe4b472bc4c26b3bf0825b + hash04b sha1:e2bfd06a37dd2031684a59a6e2b033e212239c78 + hash03b sha1:5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 + hash15c sha1:9b4b2c61f0615412da3c10f98ff85b57c04ec765 + hash11c sha1:7e3c53503a3db8dd996cb62e37c66e070b44b54d + hash08c sha1:851e1638784a884c7dd26c5d41f3340f6387413a + hash05c sha1:99fc34adfc400b95c67b013115e37e31aa9a6d23 + hash02c sha1:283b48219aee9a4105f6cab337e789065c82c2b9 + hash15d sha1:7c4e546efd0fe939f876beb262ece02797880b54 + hash05d sha1:6c841cc36ea496027290967ca96bd2bef54dbb47 + hash15e sha1:d682107b8bf7a7aea1e537a8d5cb6a12b60135f1 + hash05e sha1:357b6ca14c7afd59b7f8b8aaaa6b8b723771135b + hash15f sha1:6be90240b5f54594203e25d9f2f64b7567175aee + hash05f sha1:660311d7f78dc53db12ac373a43fca7465381a7e + + hash15a sha256:45b1558e5c1b75f570010fa48aaa67bb2289fcd431b34ad81cb4c8b95f4f872a + hash14a sha256:6e7af179ea4dd28afdc83ae6912ba0098cdeff764b26a8b750b157dd81749092 + hash13a sha256:7353089961baf555388e1bac68c67c8ea94b08ccbd97532201cf7f6790703052 + hash12a sha256:5863e4521689ee1879ceab3b38d39e93ab5b51ec70aaf6a96ad388fbdedfa25e + hash11a sha256:82a0ec0338b4ecf8b44304badf4ad38d7469dc41827f38d7ba6c42e3bae3ee98 + hash10a sha256:e84f2564e92de9792c93b8d197262c735d7ccb1de6025cef8759af8f6c3308eb + hash09a sha256:4dd07764bcec696f195c0ea71ae89e174876403af1637e4642b8f4453fd23028 + hash08a sha256:02132c4546cd88a1d0aa5854dd55da120927f7904ba16afe36fe03e91a622067 + hash07a sha256:369baf7d00c6720efdc10273493555f943051f84a4706fb24caeb353fa4789db + hash06a sha256:52d32c10353583b2d96a5849b1f1f43c8018e76f3e8ef1b0d46eb5cff7cdefaf + hash15b sha256:345e6660b345fa174738a31a7a59423c394bdf414804e200bc510c65d971ae96 + hash14b sha256:7653a6596021c52e405cba979eea15a729993e7102b9a61ba4667e34f0ead4a1 + hash13b sha256:0f202a0b6b9690de2349c173dfd766a37e82744f61c14f1c389306f1d69f470b + hash12b sha256:eb00f219c026136ea6535b16ff8ec3efa510e6bf50098ca041e1a2a1d4b79840 + hash05b sha256:993b2290cd0c24c27c849d99f1904f3b590f77af0f539932734ad05679ac5a2f + hash04b sha256:c7fba0d6104917fbf35258f40b9fa4fc697cfa992deecd1570a3b08d0a5587a9 + hash03b sha256:7287a2d78a3766c181b08df38951d784b08b72a44f571ed6d855bd0be22c70f6 + hash15c sha256:62316660a22bf97857dc4a16709ec4d93a224e8c9f37d661ef91751e1f4c4166 + hash11c sha256:51c3763de9b08309370adc5036d58debb331980e73097902957c444602551daa + hash08c sha256:22cf1fa29599898a7218c51135d66ed85d22aad584f77db3305dedce4c3d4798 + hash05c sha256:2508fd86db980f0508893a1c1571bdf3b2ee113dc25ddb1a3a2fb94bd6cd0d58 + hash02c sha256:63bb527e0b4e1c8e1dd0d54dd778ca7c3718689fd6e37c473044cfbcf1cacfdb + hash15d sha256:667acb4e2d5f8df15e5aea4506dfd16d25bc7feca70fdb0d965a7222f983bb88 + hash05d sha256:09e6b5a6fe666c4a027674b6611a254b7d2528cd211c6b5288d1b4db6c741dfa + hash15e sha256:e8cbf52f6fcadc6de3c7761e64a89e9fe38d19a03d3e28ef6ca8596d93fc4f3a + hash05e sha256:cdb1e19f7ba1539f95af51a57edeb88a7ecc97d3c2f52da8c4c86af308595607 + hash15f sha256:29c14cb92da448a923963b8a43994268b19c2e57913de73f3667421fd2c0eeec + hash05f sha256:14a6e641b2c0a9f398ebac6b4d34afa5efea4c52d2631382f45f8f662266903b + EOF ' commit_sha1=$(git rev-parse 1st^{commit}) @@ -68,16 +128,16 @@ test_expect_success 'setup merge base (x)' ' ' cat <<EOF | sort >expect_notes_x -457a85d6c814ea208550f15fcc48f804ac8dc023 $commit_sha15 -b0c95b954301d69da2bc3723f4cb1680d355937c $commit_sha14 -5d30216a129eeffa97d9694ffe8c74317a560315 $commit_sha13 -dd161bc149470fd890dd4ab52a4cbd79bbd18c36 $commit_sha12 -7abbc45126d680336fb24294f013a7cdfa3ed545 $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -20c613c835011c48a5abe29170a2402ca6354910 $commit_sha9 -a3daf8a1e4e5dc3409a303ad8481d57bfea7f5d6 $commit_sha8 -897003322b53bc6ca098e9324ee508362347e734 $commit_sha7 -11d97fdebfa5ceee540a3da07bce6fa0222bc082 $commit_sha6 +$(test_oid hash15a) $commit_sha15 +$(test_oid hash14a) $commit_sha14 +$(test_oid hash13a) $commit_sha13 +$(test_oid hash12a) $commit_sha12 +$(test_oid hash11a) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash09a) $commit_sha9 +$(test_oid hash08a) $commit_sha8 +$(test_oid hash07a) $commit_sha7 +$(test_oid hash06a) $commit_sha6 EOF cat >expect_log_x <<EOF @@ -141,16 +201,16 @@ test_expect_success 'setup local branch (y)' ' ' cat <<EOF | sort >expect_notes_y -68b8630d25516028bed862719855b3d6768d7833 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7abbc45126d680336fb24294f013a7cdfa3ed545 $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -20c613c835011c48a5abe29170a2402ca6354910 $commit_sha9 -154508c7a0bcad82b6fe4b472bc4c26b3bf0825b $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 +$(test_oid hash15b) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11a) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash09a) $commit_sha9 +$(test_oid hash05b) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 EOF cat >expect_log_y <<EOF @@ -214,16 +274,16 @@ test_expect_success 'setup remote branch (z)' ' ' cat <<EOF | sort >expect_notes_z -9b4b2c61f0615412da3c10f98ff85b57c04ec765 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -5d30216a129eeffa97d9694ffe8c74317a560315 $commit_sha13 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -897003322b53bc6ca098e9324ee508362347e734 $commit_sha7 -99fc34adfc400b95c67b013115e37e31aa9a6d23 $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15c) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13a) $commit_sha13 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash07a) $commit_sha7 +$(test_oid hash05c) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_z <<EOF @@ -306,16 +366,16 @@ test_expect_success 'merge z into y with invalid configuration option => Fail/No ' cat <<EOF | sort >expect_notes_ours -68b8630d25516028bed862719855b3d6768d7833 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -154508c7a0bcad82b6fe4b472bc4c26b3bf0825b $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15b) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash05b) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_ours <<EOF @@ -395,16 +455,16 @@ test_expect_success 'reset to pre-merge state (y)' ' ' cat <<EOF | sort >expect_notes_theirs -9b4b2c61f0615412da3c10f98ff85b57c04ec765 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -99fc34adfc400b95c67b013115e37e31aa9a6d23 $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15c) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash05c) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_theirs <<EOF @@ -473,17 +533,17 @@ test_expect_success 'reset to pre-merge state (y)' ' ' cat <<EOF | sort >expect_notes_union -7c4e546efd0fe939f876beb262ece02797880b54 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -6c841cc36ea496027290967ca96bd2bef54dbb47 $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15d) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash05d) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_union <<EOF @@ -574,17 +634,17 @@ test_expect_success 'merge z into y with "manual" per-ref only checks specific r ' cat <<EOF | sort >expect_notes_union2 -d682107b8bf7a7aea1e537a8d5cb6a12b60135f1 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -357b6ca14c7afd59b7f8b8aaaa6b8b723771135b $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15e) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash05e) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_union2 <<EOF @@ -648,17 +708,17 @@ test_expect_success 'reset to pre-merge state (z)' ' ' cat <<EOF | sort >expect_notes_cat_sort_uniq -6be90240b5f54594203e25d9f2f64b7567175aee $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -660311d7f78dc53db12ac373a43fca7465381a7e $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15f) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash05f) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_cat_sort_uniq <<EOF diff --git a/t/t3310-notes-merge-manual-resolve.sh b/t/t3310-notes-merge-manual-resolve.sh index 2dea846e25..d3d72e25fe 100755 --- a/t/t3310-notes-merge-manual-resolve.sh +++ b/t/t3310-notes-merge-manual-resolve.sh @@ -13,7 +13,39 @@ test_expect_success 'setup commits' ' test_commit 2nd && test_commit 3rd && test_commit 4th && - test_commit 5th + test_commit 5th && + + test_oid_cache <<-EOF + hash04a sha1:6e8e3febca3c2bb896704335cc4d0c34cb2f8715 + hash03a sha1:e5388c10860456ee60673025345fe2e153eb8cf8 + hash02a sha1:ceefa674873670e7ecd131814d909723cce2b669 + hash04b sha1:e2bfd06a37dd2031684a59a6e2b033e212239c78 + hash03b sha1:5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 + hash01b sha1:b0a6021ec006d07e80e9b20ec9b444cbd9d560d3 + hash04c sha1:cff59c793c20bb49a4e01bc06fb06bad642e0d54 + hash02c sha1:283b48219aee9a4105f6cab337e789065c82c2b9 + hash01c sha1:0a81da8956346e19bcb27a906f04af327e03e31b + hash04d sha1:00494adecf2d9635a02fa431308d67993f853968 + hash01e sha1:f75d1df88cbfe4258d49852f26cfc83f2ad4494b + hash04f sha1:021faa20e931fb48986ffc6282b4bb05553ac946 + hash01f sha1:0a59e787e6d688aa6309e56e8c1b89431a0fc1c1 + hash05g sha1:304dfb4325cf243025b9957486eb605a9b51c199 + + hash04a sha256:f18a935e65866345098b3b754071dbf9f3aa3520eb27a7b036b278c5e2f1ed7e + hash03a sha256:713035dc94067a64e5fa6e4e1821b7c3bde49a77c7cb3f80eaadefa1ca41b3d2 + hash02a sha256:f160a67e048b6fa75bec3952184154045076692cf5dccd3da21e3fd34b7a3f0f + hash04b sha256:c7fba0d6104917fbf35258f40b9fa4fc697cfa992deecd1570a3b08d0a5587a9 + hash03b sha256:7287a2d78a3766c181b08df38951d784b08b72a44f571ed6d855bd0be22c70f6 + hash01b sha256:da96cf778c15d0a2bb76f98b2a62f6c9c01730fa7030e8f08ef0191048e7d620 + hash04c sha256:cb615d2def4b834d5f55b2351df97dc92bee4f5009d285201427f349081c8aca + hash02c sha256:63bb527e0b4e1c8e1dd0d54dd778ca7c3718689fd6e37c473044cfbcf1cacfdb + hash01c sha256:5b87237ac1fbae0246256fed9f9a1f077c4140fb7e6444925f8dbfa5ae406cd8 + hash04d sha256:eeddc9f9f6cb3d6b39b861659853f10891dc373e0b6eecb09e03e39b6ce64714 + hash01e sha256:108f521b1a74c2e6d0b52a4eda87e09162bf847f7d190cfce496ee1af0b29a5a + hash04f sha256:901acda0454502b3bbd281f130c419e6c8de78afcf72a8def8d45ad31462bce4 + hash01f sha256:a2d99d1b8bf23c8af7d9d91368454adc110dfd5cc068a4cebb486ee8f5a1e16c + hash05g sha256:4fef015b01da8efe929a68e3bb9b8fbad81f53995f097befe8ebc93f12ab98ec + EOF ' commit_sha1=$(git rev-parse 1st^{commit}) @@ -32,10 +64,16 @@ verify_notes () { test_cmp "expect_log_$notes_ref" "output_log_$notes_ref" } +notes_merge_files_gone () { + # No .git/NOTES_MERGE_* files left + { ls .git/NOTES_MERGE_* >output || :; } && + test_must_be_empty output +} + cat <<EOF | sort >expect_notes_x -6e8e3febca3c2bb896704335cc4d0c34cb2f8715 $commit_sha4 -e5388c10860456ee60673025345fe2e153eb8cf8 $commit_sha3 -ceefa674873670e7ecd131814d909723cce2b669 $commit_sha2 +$(test_oid hash04a) $commit_sha4 +$(test_oid hash03a) $commit_sha3 +$(test_oid hash02a) $commit_sha2 EOF cat >expect_log_x <<EOF @@ -63,9 +101,9 @@ test_expect_success 'setup merge base (x)' ' ' cat <<EOF | sort >expect_notes_y -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -b0a6021ec006d07e80e9b20ec9b444cbd9d560d3 $commit_sha1 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash01b) $commit_sha1 EOF cat >expect_log_y <<EOF @@ -95,9 +133,9 @@ test_expect_success 'setup local branch (y)' ' ' cat <<EOF | sort >expect_notes_z -cff59c793c20bb49a4e01bc06fb06bad642e0d54 $commit_sha4 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 -0a81da8956346e19bcb27a906f04af327e03e31b $commit_sha1 +$(test_oid hash04c) $commit_sha4 +$(test_oid hash02c) $commit_sha2 +$(test_oid hash01c) $commit_sha1 EOF cat >expect_log_z <<EOF @@ -193,9 +231,9 @@ test_expect_success 'merge z into m (== y) with default ("manual") resolver => C ' cat <<EOF | sort >expect_notes_z -00494adecf2d9635a02fa431308d67993f853968 $commit_sha4 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 -0a81da8956346e19bcb27a906f04af327e03e31b $commit_sha1 +$(test_oid hash04d) $commit_sha4 +$(test_oid hash02c) $commit_sha2 +$(test_oid hash01c) $commit_sha1 EOF cat >expect_log_z <<EOF @@ -231,8 +269,8 @@ test_expect_success 'cannot do merge w/conflicts when previous merge is unfinish # Setup non-conflicting merge between x and new notes ref w cat <<EOF | sort >expect_notes_w -ceefa674873670e7ecd131814d909723cce2b669 $commit_sha2 -f75d1df88cbfe4258d49852f26cfc83f2ad4494b $commit_sha1 +$(test_oid hash02a) $commit_sha2 +$(test_oid hash01e) $commit_sha1 EOF cat >expect_log_w <<EOF @@ -258,10 +296,10 @@ test_expect_success 'setup unrelated notes ref (w)' ' ' cat <<EOF | sort >expect_notes_w -6e8e3febca3c2bb896704335cc4d0c34cb2f8715 $commit_sha4 -e5388c10860456ee60673025345fe2e153eb8cf8 $commit_sha3 -ceefa674873670e7ecd131814d909723cce2b669 $commit_sha2 -f75d1df88cbfe4258d49852f26cfc83f2ad4494b $commit_sha1 +$(test_oid hash04a) $commit_sha4 +$(test_oid hash03a) $commit_sha3 +$(test_oid hash02a) $commit_sha2 +$(test_oid hash01e) $commit_sha1 EOF cat >expect_log_w <<EOF @@ -291,10 +329,10 @@ test_expect_success 'can do merge without conflicts even if previous merge is un ' cat <<EOF | sort >expect_notes_m -021faa20e931fb48986ffc6282b4bb05553ac946 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 -0a59e787e6d688aa6309e56e8c1b89431a0fc1c1 $commit_sha1 +$(test_oid hash04f) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 +$(test_oid hash01f) $commit_sha1 EOF cat >expect_log_m <<EOF @@ -335,9 +373,7 @@ EOF y and z notes on 4th commit EOF git notes merge --commit && - # No .git/NOTES_MERGE_* files left - test_might_fail ls .git/NOTES_MERGE_* >output 2>/dev/null && - test_must_be_empty output && + notes_merge_files_gone && # Merge commit has pre-merge y and pre-merge z as parents test "$(git rev-parse refs/notes/m^1)" = "$(cat pre_merge_y)" && test "$(git rev-parse refs/notes/m^2)" = "$(cat pre_merge_z)" && @@ -397,9 +433,7 @@ test_expect_success 'redo merge of z into m (== y) with default ("manual") resol test_expect_success 'abort notes merge' ' git notes merge --abort && - # No .git/NOTES_MERGE_* files left - test_might_fail ls .git/NOTES_MERGE_* >output 2>/dev/null && - test_must_be_empty output && + notes_merge_files_gone && # m has not moved (still == y) test "$(git rev-parse refs/notes/m)" = "$(cat pre_merge_y)" && # Verify that other notes refs has not changed (w, x, y and z) @@ -430,9 +464,9 @@ test_expect_success 'redo merge of z into m (== y) with default ("manual") resol ' cat <<EOF | sort >expect_notes_m -304dfb4325cf243025b9957486eb605a9b51c199 $commit_sha5 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 -0a59e787e6d688aa6309e56e8c1b89431a0fc1c1 $commit_sha1 +$(test_oid hash05g) $commit_sha5 +$(test_oid hash02c) $commit_sha2 +$(test_oid hash01f) $commit_sha1 EOF cat >expect_log_m <<EOF @@ -464,9 +498,7 @@ EOF echo "new note on 5th commit" > .git/NOTES_MERGE_WORKTREE/$commit_sha5 && # Finalize merge git notes merge --commit && - # No .git/NOTES_MERGE_* files left - test_might_fail ls .git/NOTES_MERGE_* >output 2>/dev/null && - test_must_be_empty output && + notes_merge_files_gone && # Merge commit has pre-merge y and pre-merge z as parents test "$(git rev-parse refs/notes/m^1)" = "$(cat pre_merge_y)" && test "$(git rev-parse refs/notes/m^2)" = "$(cat pre_merge_z)" && @@ -553,9 +585,7 @@ EOF test_expect_success 'resolve situation by aborting the notes merge' ' git notes merge --abort && - # No .git/NOTES_MERGE_* files left - test_might_fail ls .git/NOTES_MERGE_* >output 2>/dev/null && - test_must_be_empty output && + notes_merge_files_gone && # m has not moved (still == w) test "$(git rev-parse refs/notes/m)" = "$(git rev-parse refs/notes/w)" && # Verify that other notes refs has not changed (w, x, y and z) diff --git a/t/t3311-notes-merge-fanout.sh b/t/t3311-notes-merge-fanout.sh index 37151a3adc..5b675417e9 100755 --- a/t/t3311-notes-merge-fanout.sh +++ b/t/t3311-notes-merge-fanout.sh @@ -29,15 +29,10 @@ verify_fanout () { git ls-tree -r --name-only "refs/notes/$notes_ref" | while read path do - case "$path" in - ??/??????????????????????????????????????) - : true - ;; - *) + echo "$path" | grep "^../[0-9a-f]*$" || { echo "Invalid path \"$path\"" && - return 1 - ;; - esac + return 1; + } done } @@ -48,15 +43,10 @@ verify_no_fanout () { git ls-tree -r --name-only "refs/notes/$notes_ref" | while read path do - case "$path" in - ????????????????????????????????????????) - : true - ;; - *) + echo "$path" | grep -v "^../.*" || { echo "Invalid path \"$path\"" && - return 1 - ;; - esac + return 1; + } done } @@ -67,7 +57,27 @@ test_expect_success 'setup a few initial commits with notes (notes ref: x)' ' do test_commit "commit$i" >/dev/null && git notes add -m "notes for commit$i" || return 1 - done + done && + + git log --format=oneline && + + test_oid_cache <<-EOF + hash05a sha1:aed91155c7a72c2188e781fdf40e0f3761b299db + hash04a sha1:99fab268f9d7ee7b011e091a436c78def8eeee69 + hash03a sha1:953c20ae26c7aa0b428c20693fe38bc687f9d1a9 + hash02a sha1:6358796131b8916eaa2dde6902642942a1cb37e1 + hash01a sha1:b02d459c32f0e68f2fe0981033bb34f38776ba47 + hash03b sha1:9f506ee70e20379d7f78204c77b334f43d77410d + hash02b sha1:23a47d6ea7d589895faf800752054818e1e7627b + + hash05a sha256:3aae5d26619d96dba93795f66325716e4cbc486884f95a6adee8fb0615a76d12 + hash04a sha256:07e43dd3d89fe634d3252e253b426aacc7285a995dcdbcf94ac284060a1122cf + hash03a sha256:26fb52eaa7f4866bf735254587be7b31209ec10e525912ffd8e8ba549ba892ff + hash02a sha256:b57ebdf23634e750dcbc4b9a37991d70f90830d568a0e4529ce9de0a3f8d605c + hash01a sha256:377903b1572bd5117087a5518fcb1011b5053cccbc59e3c7c823a8615204173b + hash03b sha256:04e7b392fda7c185bfa17c9179b56db732edc2dc2b3bf887308dcaabb717270d + hash02b sha256:66099aaaec49a485ed990acadd9a9b81232ea592079964113d8f581ff69ef50b + EOF ' commit_sha1=$(git rev-parse commit1^{commit}) @@ -77,11 +87,11 @@ commit_sha4=$(git rev-parse commit4^{commit}) commit_sha5=$(git rev-parse commit5^{commit}) cat <<EOF | sort >expect_notes_x -aed91155c7a72c2188e781fdf40e0f3761b299db $commit_sha5 -99fab268f9d7ee7b011e091a436c78def8eeee69 $commit_sha4 -953c20ae26c7aa0b428c20693fe38bc687f9d1a9 $commit_sha3 -6358796131b8916eaa2dde6902642942a1cb37e1 $commit_sha2 -b02d459c32f0e68f2fe0981033bb34f38776ba47 $commit_sha1 +$(test_oid hash05a) $commit_sha5 +$(test_oid hash04a) $commit_sha4 +$(test_oid hash03a) $commit_sha3 +$(test_oid hash02a) $commit_sha2 +$(test_oid hash01a) $commit_sha1 EOF cat >expect_log_x <<EOF @@ -145,9 +155,9 @@ test_expect_success 'Fast-forward merge (y => x)' ' ' cat <<EOF | sort >expect_notes_z -9f506ee70e20379d7f78204c77b334f43d77410d $commit_sha3 -23a47d6ea7d589895faf800752054818e1e7627b $commit_sha2 -b02d459c32f0e68f2fe0981033bb34f38776ba47 $commit_sha1 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02b) $commit_sha2 +$(test_oid hash01a) $commit_sha1 EOF cat >expect_log_z <<EOF diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index ab18ac5f28..40d2975995 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -64,7 +64,7 @@ test_expect_success 'rebase sets ORIG_HEAD to pre-rebase state' ' pre="$(git rev-parse --verify HEAD)" && git rebase master && test_cmp_rev "$pre" ORIG_HEAD && - ! test_cmp_rev "$pre" HEAD + test_cmp_rev ! "$pre" HEAD ' test_expect_success 'rebase, with <onto> and <upstream> specified as :/quuxery' ' @@ -143,11 +143,11 @@ test_expect_success 'setup: recover' ' test_expect_success 'Show verbose error when HEAD could not be detached' ' >B && + test_when_finished "rm -f B" && test_must_fail git rebase topic 2>output.err >output.out && test_i18ngrep "The following untracked working tree files would be overwritten by checkout:" output.err && test_i18ngrep B output.err ' -rm -f B test_expect_success 'fail when upstream arg is missing and not on branch' ' git checkout topic && @@ -159,19 +159,43 @@ test_expect_success 'fail when upstream arg is missing and not configured' ' test_must_fail git rebase ' -test_expect_success 'default to common base in @{upstream}s reflog if no upstream arg' ' +test_expect_success 'rebase works with format.useAutoBase' ' + test_config format.useAutoBase true && + git checkout topic && + git rebase master +' + +test_expect_success 'default to common base in @{upstream}s reflog if no upstream arg (--merge)' ' git checkout -b default-base master && git checkout -b default topic && git config branch.default.remote . && git config branch.default.merge refs/heads/default-base && - git rebase && + git rebase --merge && git rev-parse --verify default-base >expect && git rev-parse default~1 >actual && test_cmp expect actual && git checkout default-base && git reset --hard HEAD^ && git checkout default && - git rebase && + git rebase --merge && + git rev-parse --verify default-base >expect && + git rev-parse default~1 >actual && + test_cmp expect actual +' + +test_expect_success 'default to common base in @{upstream}s reflog if no upstream arg (--apply)' ' + git checkout -B default-base master && + git checkout -B default topic && + git config branch.default.remote . && + git config branch.default.merge refs/heads/default-base && + git rebase --apply && + git rev-parse --verify default-base >expect && + git rev-parse default~1 >actual && + test_cmp expect actual && + git checkout default-base && + git reset --hard HEAD^ && + git checkout default && + git rebase --apply && git rev-parse --verify default-base >expect && git rev-parse default~1 >actual && test_cmp expect actual @@ -200,9 +224,15 @@ test_expect_success 'cherry-picked commits and fork-point work together' ' test_cmp expect D ' -test_expect_success 'rebase -q is quiet' ' +test_expect_success 'rebase --apply -q is quiet' ' git checkout -b quiet topic && - git rebase -q master >output.out 2>&1 && + git rebase --apply -q master >output.out 2>&1 && + test_must_be_empty output.out +' + +test_expect_success 'rebase --merge -q is quiet' ' + git checkout -B quiet topic && + git rebase --merge -q master >output.out 2>&1 && test_must_be_empty output.out ' @@ -285,7 +315,7 @@ EOF test_cmp From_.msg out ' -test_expect_success 'rebase --am and --show-current-patch' ' +test_expect_success 'rebase --apply and --show-current-patch' ' test_create_repo conflict-apply && ( cd conflict-apply && @@ -295,13 +325,13 @@ test_expect_success 'rebase --am and --show-current-patch' ' echo two >>init.t && git commit -a -m two && git tag two && - test_must_fail git rebase -f --onto init HEAD^ && + test_must_fail git rebase --apply -f --onto init HEAD^ && GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && grep "show.*$(git rev-parse two)" stderr ) ' -test_expect_success 'rebase --am and .gitattributes' ' +test_expect_success 'rebase --apply and .gitattributes' ' test_create_repo attributes && ( cd attributes && @@ -371,4 +401,22 @@ test_expect_success 'rebase -c rebase.useBuiltin=false warning' ' test_must_be_empty err ' +test_expect_success 'switch to branch checked out here' ' + git checkout master && + git rebase master master +' + +test_expect_success 'switch to branch not checked out' ' + git checkout master && + git branch other && + git rebase master other +' + +test_expect_success 'refuse to switch to branch checked out elsewhere' ' + git checkout master && + git worktree add wt && + test_must_fail git -C wt rebase master master 2>err && + test_i18ngrep "already checked out" err +' + test_done diff --git a/t/t3401-rebase-and-am-rename.sh b/t/t3401-rebase-and-am-rename.sh index a0b9438b22..f18bae9450 100755 --- a/t/t3401-rebase-and-am-rename.sh +++ b/t/t3401-rebase-and-am-rename.sh @@ -52,13 +52,13 @@ test_expect_success 'rebase --interactive: directory rename detected' ' ) ' -test_expect_failure 'rebase (am): directory rename detected' ' +test_expect_failure 'rebase --apply: directory rename detected' ' ( cd dir-rename && git checkout B^0 && - git -c merge.directoryRenames=true rebase A && + git -c merge.directoryRenames=true rebase --apply A && git ls-files -s >out && test_line_count = 5 out && diff --git a/t/t3402-rebase-merge.sh b/t/t3402-rebase-merge.sh index a1ec501a87..6e032716a6 100755 --- a/t/t3402-rebase-merge.sh +++ b/t/t3402-rebase-merge.sh @@ -162,4 +162,81 @@ test_expect_success 'rebase --skip works with two conflicts in a row' ' git rebase --skip ' +test_expect_success '--reapply-cherry-picks' ' + git init repo && + + # O(1-10) -- O(1-11) -- O(0-10) master + # \ + # -- O(1-11) -- O(1-12) otherbranch + + printf "Line %d\n" $(test_seq 1 10) >repo/file.txt && + git -C repo add file.txt && + git -C repo commit -m "base commit" && + + printf "Line %d\n" $(test_seq 1 11) >repo/file.txt && + git -C repo commit -a -m "add 11" && + + printf "Line %d\n" $(test_seq 0 10) >repo/file.txt && + git -C repo commit -a -m "add 0 delete 11" && + + git -C repo checkout -b otherbranch HEAD^^ && + printf "Line %d\n" $(test_seq 1 11) >repo/file.txt && + git -C repo commit -a -m "add 11 in another branch" && + + printf "Line %d\n" $(test_seq 1 12) >repo/file.txt && + git -C repo commit -a -m "add 12 in another branch" && + + # Regular rebase fails, because the 1-11 commit is deduplicated + test_must_fail git -C repo rebase --merge master 2> err && + test_i18ngrep "error: could not apply.*add 12 in another branch" err && + git -C repo rebase --abort && + + # With --reapply-cherry-picks, it works + git -C repo rebase --merge --reapply-cherry-picks master +' + +test_expect_success '--reapply-cherry-picks refrains from reading unneeded blobs' ' + git init server && + + # O(1-10) -- O(1-11) -- O(1-12) master + # \ + # -- O(0-10) otherbranch + + printf "Line %d\n" $(test_seq 1 10) >server/file.txt && + git -C server add file.txt && + git -C server commit -m "merge base" && + + printf "Line %d\n" $(test_seq 1 11) >server/file.txt && + git -C server commit -a -m "add 11" && + + printf "Line %d\n" $(test_seq 1 12) >server/file.txt && + git -C server commit -a -m "add 12" && + + git -C server checkout -b otherbranch HEAD^^ && + printf "Line %d\n" $(test_seq 0 10) >server/file.txt && + git -C server commit -a -m "add 0" && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + + git clone --filter=blob:none "file://$(pwd)/server" client && + git -C client checkout origin/master && + git -C client checkout origin/otherbranch && + + # Sanity check to ensure that the blobs from the merge base and "add + # 11" are missing + git -C client rev-list --objects --all --missing=print >missing_list && + MERGE_BASE_BLOB=$(git -C server rev-parse master^^:file.txt) && + ADD_11_BLOB=$(git -C server rev-parse master^:file.txt) && + grep "[?]$MERGE_BASE_BLOB" missing_list && + grep "[?]$ADD_11_BLOB" missing_list && + + git -C client rebase --merge --reapply-cherry-picks origin/master && + + # The blob from the merge base had to be fetched, but not "add 11" + git -C client rev-list --objects --all --missing=print >missing_list && + ! grep "[?]$MERGE_BASE_BLOB" missing_list && + grep "[?]$ADD_11_BLOB" missing_list +' + test_done diff --git a/t/t3403-rebase-skip.sh b/t/t3403-rebase-skip.sh index 1f5122b632..a927774910 100755 --- a/t/t3403-rebase-skip.sh +++ b/t/t3403-rebase-skip.sh @@ -7,6 +7,8 @@ test_description='git rebase --merge --skip tests' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + # we assume the default git am -3 --skip strategy is tested independently # and always works :) @@ -20,6 +22,20 @@ test_expect_success setup ' git commit -a -m "hello world" && echo goodbye >> hello && git commit -a -m "goodbye" && + git tag goodbye && + + git checkout --detach && + git checkout HEAD^ . && + test_tick && + git commit -m reverted-goodbye && + git tag reverted-goodbye && + git checkout goodbye && + test_tick && + GIT_AUTHOR_NAME="Another Author" \ + GIT_AUTHOR_EMAIL="another.author@example.com" \ + git commit --amend --no-edit -m amended-goodbye && + test_tick && + git tag amended-goodbye && git checkout -f skip-reference && echo moo > hello && @@ -76,4 +92,99 @@ test_expect_success 'moved back to branch correctly' ' test_debug 'gitk --all & sleep 1' +test_expect_success 'correct advice upon picking empty commit' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase -i --onto goodbye \ + amended-goodbye^ amended-goodbye 2>err && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git rebase --skip" err && + test_must_fail git commit && + test_i18ngrep "git rebase --skip" err +' + +test_expect_success 'correct authorship when committing empty pick' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase -i --onto goodbye \ + amended-goodbye^ amended-goodbye && + git commit --allow-empty && + git log --pretty=format:"%an <%ae>%n%ad%B" -1 amended-goodbye >expect && + git log --pretty=format:"%an <%ae>%n%ad%B" -1 HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'correct advice upon rewording empty commit' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="reword 1" git rebase -i \ + --onto goodbye amended-goodbye^ amended-goodbye 2>err + ) && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git rebase --skip" err && + test_must_fail git commit && + test_i18ngrep "git rebase --skip" err +' + +test_expect_success 'correct advice upon editing empty commit' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="edit 1" git rebase -i \ + --onto goodbye amended-goodbye^ amended-goodbye 2>err + ) && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git rebase --skip" err && + test_must_fail git commit && + test_i18ngrep "git rebase --skip" err +' + +test_expect_success 'correct advice upon cherry-picking an empty commit during a rebase' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 exec_git_cherry-pick_amended-goodbye" \ + git rebase -i goodbye^ goodbye 2>err + ) && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git cherry-pick --skip" err && + test_must_fail git commit 2>err && + test_i18ngrep "git cherry-pick --skip" err +' + +test_expect_success 'correct advice upon multi cherry-pick picking an empty commit during a rebase' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 exec_git_cherry-pick_goodbye_amended-goodbye" \ + git rebase -i goodbye^^ goodbye 2>err + ) && + test_i18ngrep "previous cherry-pick is now empty" err && + test_i18ngrep "git cherry-pick --skip" err && + test_must_fail git commit 2>err && + test_i18ngrep "git cherry-pick --skip" err +' + +test_expect_success 'fixup that empties commit fails' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 fixup 2" git rebase -i \ + goodbye^ reverted-goodbye + ) +' + +test_expect_success 'squash that empties commit fails' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 squash 2" git rebase -i \ + goodbye^ reverted-goodbye + ) +' + +# Must be the last test in this file +test_expect_success '$EDITOR and friends are unchanged' ' + test_editor_unchanged +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index d2dfbe46b9..4a7d21f898 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -72,12 +72,16 @@ test_expect_success 'rebase --keep-empty' ' test_line_count = 6 actual ' -test_expect_success 'rebase -i with empty HEAD' ' +test_expect_success 'rebase -i with empty todo list' ' cat >expect <<-\EOF && error: nothing to do EOF - set_fake_editor && - test_must_fail env FAKE_LINES="1 exec_true" git rebase -i HEAD^ >actual 2>&1 && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="#" \ + git rebase -i HEAD^ >output 2>&1 + ) && + tail -n 1 output >actual && # Ignore output about changing todo list test_i18ncmp expect actual ' @@ -136,8 +140,11 @@ test_expect_success 'rebase -i sets work tree properly' ' test_expect_success 'rebase -i with the exec command checks tree cleanness' ' git checkout master && - set_fake_editor && - test_must_fail env FAKE_LINES="exec_echo_foo_>file1 1" git rebase -i HEAD^ && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="exec_echo_foo_>file1 1" \ + git rebase -i HEAD^ + ) && test_cmp_rev master^ HEAD && git reset --hard && git rebase --continue @@ -163,9 +170,11 @@ test_expect_success 'rebase -x with newline in command fails' ' test_expect_success 'rebase -i with exec of inexistent command' ' git checkout master && test_when_finished "git rebase --abort" && - set_fake_editor && - test_must_fail env FAKE_LINES="exec_this-command-does-not-exist 1" \ - git rebase -i HEAD^ >actual 2>&1 && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="exec_this-command-does-not-exist 1" \ + git rebase -i HEAD^ >actual 2>&1 + ) && ! grep "Maybe git-rebase is broken" actual ' @@ -176,57 +185,55 @@ test_expect_success 'implicit interactive rebase does not invoke sequence editor test_expect_success 'no changes are a nop' ' git checkout branch2 && - set_fake_editor && git rebase -i F && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" && - test $(git rev-parse I) = $(git rev-parse HEAD) + test_cmp_rev I HEAD ' test_expect_success 'test the [branch] option' ' git checkout -b dead-end && git rm file6 && git commit -m "stop here" && - set_fake_editor && git rebase -i F branch2 && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" && - test $(git rev-parse I) = $(git rev-parse branch2) && - test $(git rev-parse I) = $(git rev-parse HEAD) + test_cmp_rev I branch2 && + test_cmp_rev I HEAD ' test_expect_success 'test --onto <branch>' ' git checkout -b test-onto branch2 && - set_fake_editor && git rebase -i --onto branch1 F && test "$(git symbolic-ref -q HEAD)" = "refs/heads/test-onto" && - test $(git rev-parse HEAD^) = $(git rev-parse branch1) && - test $(git rev-parse I) = $(git rev-parse branch2) + test_cmp_rev HEAD^ branch1 && + test_cmp_rev I branch2 ' test_expect_success 'rebase on top of a non-conflicting commit' ' git checkout branch1 && git tag original-branch1 && - set_fake_editor && git rebase -i branch2 && test file6 = $(git diff --name-only original-branch1) && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" && - test $(git rev-parse I) = $(git rev-parse branch2) && - test $(git rev-parse I) = $(git rev-parse HEAD~2) + test_cmp_rev I branch2 && + test_cmp_rev I HEAD~2 ' test_expect_success 'reflog for the branch shows state before rebase' ' - test $(git rev-parse branch1@{1}) = $(git rev-parse original-branch1) + test_cmp_rev branch1@{1} original-branch1 ' test_expect_success 'reflog for the branch shows correct finish message' ' - printf "rebase -i (finish): refs/heads/branch1 onto %s\n" \ + printf "rebase (finish): refs/heads/branch1 onto %s\n" \ "$(git rev-parse branch2)" >expected && git log -g --pretty=%gs -1 refs/heads/branch1 >actual && test_cmp expected actual ' test_expect_success 'exchange two commits' ' - set_fake_editor && - FAKE_LINES="2 1" git rebase -i HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="2 1" git rebase -i HEAD~2 + ) && test H = $(git cat-file commit HEAD^ | sed -ne \$p) && test G = $(git cat-file commit HEAD | sed -ne \$p) && blob1=$(git rev-parse --short HEAD^:file1) && @@ -252,7 +259,6 @@ test_expect_success 'stop on conflicting pick' ' >>>>>>> $commit... G EOF git tag new-branch1 && - set_fake_editor && test_must_fail git rebase -i master && test "$(git rev-parse HEAD~3)" = "$(git rev-parse master)" && test_cmp expect .git/rebase-merge/patch && @@ -273,7 +279,7 @@ test_expect_success 'show conflicted patch' ' test_expect_success 'abort' ' git rebase --abort && - test $(git rev-parse new-branch1) = $(git rev-parse HEAD) && + test_cmp_rev new-branch1 HEAD && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" && test_path_is_missing .git/rebase-merge ' @@ -281,7 +287,6 @@ test_expect_success 'abort' ' test_expect_success 'abort with error when new base cannot be checked out' ' git rm --cached file1 && git commit -m "remove file in base" && - set_fake_editor && test_must_fail git rebase -i master > output 2>&1 && test_i18ngrep "The following untracked working tree files would be overwritten by checkout:" \ output && @@ -296,7 +301,6 @@ test_expect_success 'retain authorship' ' test_tick && GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" && git tag twerp && - set_fake_editor && git rebase -i --onto master HEAD^ && git show HEAD | grep "^Author: Twerp Snog" ' @@ -314,12 +318,11 @@ test_expect_success 'retain authorship w/ conflicts' ' test_commit b conflict b conflict-b && GIT_AUTHOR_NAME=$oGIT_AUTHOR_NAME && - set_fake_editor && test_must_fail git rebase -i conflict-a && echo resolved >conflict && git add conflict && git rebase --continue && - test $(git rev-parse conflict-a^0) = $(git rev-parse HEAD^) && + test_cmp_rev conflict-a^0 HEAD^ && git show >out && grep AttributeMe out ' @@ -330,11 +333,13 @@ test_expect_success 'squash' ' test_tick && GIT_AUTHOR_NAME="Nitfol" git commit -m "nitfol" file7 && echo "******************************" && - set_fake_editor && - FAKE_LINES="1 squash 2" EXPECT_HEADER_COUNT=2 \ - git rebase -i --onto master HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="1 squash 2" EXPECT_HEADER_COUNT=2 \ + git rebase -i --onto master HEAD~2 + ) && test B = $(cat file7) && - test $(git rev-parse HEAD^) = $(git rev-parse master) + test_cmp_rev HEAD^ master ' test_expect_success 'retain authorship when squashing' ' @@ -343,7 +348,6 @@ test_expect_success 'retain authorship when squashing' ' test_expect_success REBASE_P '-p handles "no changes" gracefully' ' HEAD=$(git rev-parse HEAD) && - set_fake_editor && git rebase -i -p HEAD^ && git update-index --refresh && git diff-files --quiet && @@ -353,8 +357,10 @@ test_expect_success REBASE_P '-p handles "no changes" gracefully' ' test_expect_failure REBASE_P 'exchange two commits with -p' ' git checkout H && - set_fake_editor && - FAKE_LINES="2 1" git rebase -i -p HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="2 1" git rebase -i -p HEAD~2 + ) && test H = $(git cat-file commit HEAD^ | sed -ne \$p) && test G = $(git cat-file commit HEAD | sed -ne \$p) ' @@ -388,14 +394,13 @@ test_expect_success REBASE_P 'preserve merges with -p' ' git commit -m M file1 && git checkout -b to-be-rebased && test_tick && - set_fake_editor && git rebase -i -p --onto branch1 master && git update-index --refresh && git diff-files --quiet && git diff-index --quiet --cached HEAD -- && - test $(git rev-parse HEAD~6) = $(git rev-parse branch1) && - test $(git rev-parse HEAD~4^2) = $(git rev-parse to-be-preserved) && - test $(git rev-parse HEAD^^2^) = $(git rev-parse HEAD^^^) && + test_cmp_rev HEAD~6 branch1 && + test_cmp_rev HEAD~4^2 to-be-preserved && + test_cmp_rev HEAD^^2^ HEAD^^^ && test $(git show HEAD~5:file1) = B && test $(git show HEAD~3:file1) = C && test $(git show HEAD:file1) = E && @@ -403,8 +408,10 @@ test_expect_success REBASE_P 'preserve merges with -p' ' ' test_expect_success REBASE_P 'edit ancestor with -p' ' - set_fake_editor && - FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3 && + ( + set_fake_editor && + FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3 + ) && echo 2 > unrelated-file && test_tick && git commit -m L2-modified --amend unrelated-file && @@ -418,19 +425,20 @@ test_expect_success REBASE_P 'edit ancestor with -p' ' test_expect_success '--continue tries to commit' ' git reset --hard D && test_tick && - set_fake_editor && - test_must_fail git rebase -i --onto new-branch1 HEAD^ && - echo resolved > file1 && - git add file1 && - FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue && - test $(git rev-parse HEAD^) = $(git rev-parse new-branch1) && + ( + set_fake_editor && + test_must_fail git rebase -i --onto new-branch1 HEAD^ && + echo resolved > file1 && + git add file1 && + FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue + ) && + test_cmp_rev HEAD^ new-branch1 && git show HEAD | grep chouette ' test_expect_success 'verbose flag is heeded, even after --continue' ' git reset --hard master@{1} && test_tick && - set_fake_editor && test_must_fail git rebase -v -i --onto new-branch1 HEAD^ && echo resolved > file1 && git add file1 && @@ -440,10 +448,13 @@ test_expect_success 'verbose flag is heeded, even after --continue' ' test_expect_success C_LOCALE_OUTPUT 'multi-squash only fires up editor once' ' base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 squash 2 squash 3 squash 4" \ - EXPECT_HEADER_COUNT=4 \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="ONCE" \ + FAKE_LINES="1 squash 2 squash 3 squash 4" \ + EXPECT_HEADER_COUNT=4 \ + git rebase -i $base + ) && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) ' @@ -451,9 +462,12 @@ test_expect_success C_LOCALE_OUTPUT 'multi-squash only fires up editor once' ' test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' ' git checkout -b multi-fixup E && base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="NEVER" FAKE_LINES="1 fixup 2 fixup 3 fixup 4" \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="NEVER" \ + FAKE_LINES="1 fixup 2 fixup 3 fixup 4" \ + git rebase -i $base + ) && test $base = $(git rev-parse HEAD^) && test 0 = $(git show | grep NEVER | wc -l) && git checkout @{-1} && @@ -463,12 +477,15 @@ test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' ' test_expect_success 'commit message used after conflict' ' git checkout -b conflict-fixup conflict-branch && base=$(git rev-parse HEAD~4) && - set_fake_editor && - test_must_fail env FAKE_LINES="1 fixup 3 fixup 4" git rebase -i $base && - echo three > conflict && - git add conflict && - FAKE_COMMIT_AMEND="ONCE" EXPECT_HEADER_COUNT=2 \ - git rebase --continue && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 fixup 3 fixup 4" \ + git rebase -i $base && + echo three > conflict && + git add conflict && + FAKE_COMMIT_AMEND="ONCE" EXPECT_HEADER_COUNT=2 \ + git rebase --continue + ) && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && git checkout @{-1} && @@ -478,12 +495,15 @@ test_expect_success 'commit message used after conflict' ' test_expect_success 'commit message retained after conflict' ' git checkout -b conflict-squash conflict-branch && base=$(git rev-parse HEAD~4) && - set_fake_editor && - test_must_fail env FAKE_LINES="1 fixup 3 squash 4" git rebase -i $base && - echo three > conflict && - git add conflict && - FAKE_COMMIT_AMEND="TWICE" EXPECT_HEADER_COUNT=2 \ - git rebase --continue && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 fixup 3 squash 4" \ + git rebase -i $base && + echo three > conflict && + git add conflict && + FAKE_COMMIT_AMEND="TWICE" EXPECT_HEADER_COUNT=2 \ + git rebase --continue + ) && test $base = $(git rev-parse HEAD^) && test 2 = $(git show | grep TWICE | wc -l) && git checkout @{-1} && @@ -500,10 +520,13 @@ test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messa EOF git checkout -b squash-fixup E && base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 fixup 2 squash 3 fixup 4" \ - EXPECT_HEADER_COUNT=4 \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="ONCE" \ + FAKE_LINES="1 fixup 2 squash 3 fixup 4" \ + EXPECT_HEADER_COUNT=4 \ + git rebase -i $base + ) && git cat-file commit HEAD | sed -e 1,/^\$/d > actual-squash-fixup && test_cmp expect-squash-fixup actual-squash-fixup && git cat-file commit HEAD@{2} | @@ -517,10 +540,13 @@ test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messa test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' ' git checkout -b skip-comments E && base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="# 1 # squash 2 # squash 3 # squash 4 #" \ - EXPECT_HEADER_COUNT=4 \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="ONCE" \ + FAKE_LINES="# 1 # squash 2 # squash 3 # squash 4 #" \ + EXPECT_HEADER_COUNT=4 \ + git rebase -i $base + ) && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && git checkout @{-1} && @@ -530,10 +556,13 @@ test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' ' test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' ' git checkout -b skip-blank-lines E && base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="> 1 > squash 2 > squash 3 > squash 4 >" \ - EXPECT_HEADER_COUNT=4 \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="ONCE" \ + FAKE_LINES="> 1 > squash 2 > squash 3 > squash 4 >" \ + EXPECT_HEADER_COUNT=4 \ + git rebase -i $base + ) && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && git checkout @{-1} && @@ -543,17 +572,21 @@ test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' ' test_expect_success 'squash works as expected' ' git checkout -b squash-works no-conflict-branch && one=$(git rev-parse HEAD~3) && - set_fake_editor && - FAKE_LINES="1 s 3 2" EXPECT_HEADER_COUNT=2 \ - git rebase -i HEAD~3 && + ( + set_fake_editor && + FAKE_LINES="1 s 3 2" EXPECT_HEADER_COUNT=2 git rebase -i HEAD~3 + ) && test $one = $(git rev-parse HEAD~2) ' test_expect_success 'interrupted squash works as expected' ' git checkout -b interrupted-squash conflict-branch && one=$(git rev-parse HEAD~3) && - set_fake_editor && - test_must_fail env FAKE_LINES="1 squash 3 2" git rebase -i HEAD~3 && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 squash 3 2" \ + git rebase -i HEAD~3 + ) && test_write_lines one two four > conflict && git add conflict && test_must_fail git rebase --continue && @@ -566,8 +599,11 @@ test_expect_success 'interrupted squash works as expected' ' test_expect_success 'interrupted squash works as expected (case 2)' ' git checkout -b interrupted-squash2 conflict-branch && one=$(git rev-parse HEAD~3) && - set_fake_editor && - test_must_fail env FAKE_LINES="3 squash 1 2" git rebase -i HEAD~3 && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="3 squash 1 2" \ + git rebase -i HEAD~3 + ) && test_write_lines one four > conflict && git add conflict && test_must_fail git rebase --continue && @@ -587,11 +623,13 @@ test_expect_success '--continue tries to commit, even for "edit"' ' git commit -m "unrelated change" && parent=$(git rev-parse HEAD^) && test_tick && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i HEAD^ && - echo edited > file7 && - git add file7 && - FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i HEAD^ && + echo edited > file7 && + git add file7 && + FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue + ) && test edited = $(git show HEAD:file7) && git show HEAD | grep chouette && test $parent = $(git rev-parse HEAD^) @@ -600,34 +638,41 @@ test_expect_success '--continue tries to commit, even for "edit"' ' test_expect_success 'aborted --continue does not squash commits after "edit"' ' old=$(git rev-parse HEAD) && test_tick && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i HEAD^ && - echo "edited again" > file7 && - git add file7 && - test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i HEAD^ && + echo "edited again" > file7 && + git add file7 && + test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue + ) && test $old = $(git rev-parse HEAD) && git rebase --abort ' test_expect_success 'auto-amend only edited commits after "edit"' ' test_tick && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i HEAD^ && - echo "edited again" > file7 && - git add file7 && - FAKE_COMMIT_MESSAGE="edited file7 again" git commit && - echo "and again" > file7 && - git add file7 && - test_tick && - test_must_fail env FAKE_COMMIT_MESSAGE="and again" git rebase --continue && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i HEAD^ && + echo "edited again" > file7 && + git add file7 && + FAKE_COMMIT_MESSAGE="edited file7 again" git commit && + echo "and again" > file7 && + git add file7 && + test_tick && + test_must_fail env FAKE_COMMIT_MESSAGE="and again" \ + git rebase --continue + ) && git rebase --abort ' test_expect_success 'clean error after failed "exec"' ' test_tick && test_when_finished "git rebase --abort || :" && - set_fake_editor && - test_must_fail env FAKE_LINES="1 exec_false" git rebase -i HEAD^ && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 exec_false" git rebase -i HEAD^ + ) && echo "edited again" > file7 && git add file7 && test_must_fail git rebase --continue 2>error && @@ -638,8 +683,10 @@ test_expect_success 'rebase a detached HEAD' ' grandparent=$(git rev-parse HEAD~2) && git checkout $(git rev-parse HEAD) && test_tick && - set_fake_editor && - FAKE_LINES="2 1" git rebase -i HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="2 1" git rebase -i HEAD~2 + ) && test $grandparent = $(git rev-parse HEAD~2) ' @@ -654,9 +701,10 @@ test_expect_success 'rebase a commit violating pre-commit' ' test_must_fail git commit -m doesnt-verify file1 && git commit -m doesnt-verify --no-verify file1 && test_tick && - set_fake_editor && - FAKE_LINES=2 git rebase -i HEAD~2 - + ( + set_fake_editor && + FAKE_LINES=2 git rebase -i HEAD~2 + ) ' test_expect_success 'rebase with a file named HEAD in worktree' ' @@ -676,8 +724,10 @@ test_expect_success 'rebase with a file named HEAD in worktree' ' git commit -m "Add body" ) && - set_fake_editor && - FAKE_LINES="1 squash 2" git rebase -i @{-1} && + ( + set_fake_editor && + FAKE_LINES="1 squash 2" git rebase -i @{-1} + ) && test "$(git show -s --pretty=format:%an)" = "Squashed Away" ' @@ -688,9 +738,8 @@ test_expect_success 'do "noop" when there is nothing to cherry-pick' ' GIT_EDITOR=: git commit --amend \ --author="Somebody else <somebody@else.com>" && test $(git rev-parse branch3) != $(git rev-parse branch4) && - set_fake_editor && git rebase -i branch3 && - test $(git rev-parse branch3) = $(git rev-parse branch4) + test_cmp_rev branch3 branch4 ' @@ -713,13 +762,14 @@ test_expect_success 'submodule rebase setup' ' git commit -a -m "submodule second" ) && test_tick && - set_fake_editor && git commit -a -m "Three changes submodule" ' test_expect_success 'submodule rebase -i' ' - set_fake_editor && - FAKE_LINES="1 squash 2 3" git rebase -i A + ( + set_fake_editor && + FAKE_LINES="1 squash 2 3" git rebase -i A + ) ' test_expect_success 'submodule conflict setup' ' @@ -736,7 +786,6 @@ test_expect_success 'submodule conflict setup' ' ' test_expect_success 'rebase -i continue with only submodule staged' ' - set_fake_editor && test_must_fail git rebase -i submodule-base && git add sub && git rebase --continue && @@ -746,11 +795,10 @@ test_expect_success 'rebase -i continue with only submodule staged' ' test_expect_success 'rebase -i continue with unstaged submodule' ' git checkout submodule-topic && git reset --hard && - set_fake_editor && test_must_fail git rebase -i submodule-base && git reset && git rebase --continue && - test $(git rev-parse submodule-base) = $(git rev-parse HEAD) + test_cmp_rev submodule-base HEAD ' test_expect_success 'avoid unnecessary reset' ' @@ -759,7 +807,6 @@ test_expect_success 'avoid unnecessary reset' ' test-tool chmtime =123456789 file3 && git update-index --refresh && HEAD=$(git rev-parse HEAD) && - set_fake_editor && git rebase -i HEAD~4 && test $HEAD = $(git rev-parse HEAD) && MTIME=$(test-tool chmtime --get file3) && @@ -768,16 +815,22 @@ test_expect_success 'avoid unnecessary reset' ' test_expect_success 'reword' ' git checkout -b reword-branch master && - set_fake_editor && - FAKE_LINES="1 2 3 reword 4" FAKE_COMMIT_MESSAGE="E changed" git rebase -i A && - git show HEAD | grep "E changed" && - test $(git rev-parse master) != $(git rev-parse HEAD) && - test $(git rev-parse master^) = $(git rev-parse HEAD^) && - FAKE_LINES="1 2 reword 3 4" FAKE_COMMIT_MESSAGE="D changed" git rebase -i A && - git show HEAD^ | grep "D changed" && - FAKE_LINES="reword 1 2 3 4" FAKE_COMMIT_MESSAGE="B changed" git rebase -i A && - git show HEAD~3 | grep "B changed" && - FAKE_LINES="1 r 2 pick 3 p 4" FAKE_COMMIT_MESSAGE="C changed" git rebase -i A && + ( + set_fake_editor && + FAKE_LINES="1 2 3 reword 4" FAKE_COMMIT_MESSAGE="E changed" \ + git rebase -i A && + git show HEAD | grep "E changed" && + test $(git rev-parse master) != $(git rev-parse HEAD) && + test_cmp_rev master^ HEAD^ && + FAKE_LINES="1 2 reword 3 4" FAKE_COMMIT_MESSAGE="D changed" \ + git rebase -i A && + git show HEAD^ | grep "D changed" && + FAKE_LINES="reword 1 2 3 4" FAKE_COMMIT_MESSAGE="B changed" \ + git rebase -i A && + git show HEAD~3 | grep "B changed" && + FAKE_LINES="1 r 2 pick 3 p 4" FAKE_COMMIT_MESSAGE="C changed" \ + git rebase -i A + ) && git show HEAD~2 | grep "C changed" ' @@ -788,7 +841,6 @@ test_expect_success 'rebase -i can copy notes' ' test_commit n2 && test_commit n3 && git notes add -m"a note" n3 && - set_fake_editor && git rebase -i --onto n1 n2 && test "a note" = "$(git notes show HEAD)" ' @@ -801,8 +853,11 @@ test_expect_success 'rebase -i can copy notes over a fixup' ' EOF git reset --hard n3 && git notes add -m"an earlier note" n2 && - set_fake_editor && - GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 f 2" git rebase -i n1 && + ( + set_fake_editor && + GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 f 2" \ + git rebase -i n1 + ) && git notes show > output && test_cmp expect output ' @@ -811,8 +866,10 @@ test_expect_success 'rebase while detaching HEAD' ' git symbolic-ref HEAD && grandparent=$(git rev-parse HEAD~2) && test_tick && - set_fake_editor && - FAKE_LINES="2 1" git rebase -i HEAD~2 HEAD^0 && + ( + set_fake_editor && + FAKE_LINES="2 1" git rebase -i HEAD~2 HEAD^0 + ) && test $grandparent = $(git rev-parse HEAD~2) && test_must_fail git symbolic-ref HEAD ' @@ -821,7 +878,6 @@ test_tick # Ensure that the rebased commits get a different timestamp. test_expect_success 'always cherry-pick with --no-ff' ' git checkout no-ff-branch && git tag original-no-ff-branch && - set_fake_editor && git rebase -i --no-ff A && for p in 0 1 2 do @@ -829,7 +885,7 @@ test_expect_success 'always cherry-pick with --no-ff' ' git diff HEAD~$p original-no-ff-branch~$p > out && test_must_be_empty out done && - test $(git rev-parse HEAD~3) = $(git rev-parse original-no-ff-branch~3) && + test_cmp_rev HEAD~3 original-no-ff-branch~3 && git diff HEAD~3 original-no-ff-branch~3 > out && test_must_be_empty out ' @@ -853,8 +909,10 @@ test_expect_success 'set up commits with funny messages' ' test_expect_success 'rebase-i history with funny messages' ' git rev-list A..funny >expect && test_tick && - set_fake_editor && - FAKE_LINES="1 2 3 4" git rebase -i A && + ( + set_fake_editor && + FAKE_LINES="1 2 3 4" git rebase -i A + ) && git rev-list A.. >actual && test_cmp expect actual ' @@ -868,9 +926,9 @@ test_expect_success 'prepare for rebase -i --exec' ' ' test_expect_success 'running "git rebase -i --exec git show HEAD"' ' - set_fake_editor && - git rebase -i --exec "git show HEAD" HEAD~2 >actual && ( + set_fake_editor && + git rebase -i --exec "git show HEAD" HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && export FAKE_LINES && git rebase -i HEAD~2 >expect @@ -881,9 +939,9 @@ test_expect_success 'running "git rebase -i --exec git show HEAD"' ' test_expect_success 'running "git rebase --exec git show HEAD -i"' ' git reset --hard execute && - set_fake_editor && - git rebase --exec "git show HEAD" -i HEAD~2 >actual && ( + set_fake_editor && + git rebase --exec "git show HEAD" -i HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && export FAKE_LINES && git rebase -i HEAD~2 >expect @@ -894,9 +952,9 @@ test_expect_success 'running "git rebase --exec git show HEAD -i"' ' test_expect_success 'running "git rebase -ix git show HEAD"' ' git reset --hard execute && - set_fake_editor && - git rebase -ix "git show HEAD" HEAD~2 >actual && ( + set_fake_editor && + git rebase -ix "git show HEAD" HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && export FAKE_LINES && git rebase -i HEAD~2 >expect @@ -908,9 +966,9 @@ test_expect_success 'running "git rebase -ix git show HEAD"' ' test_expect_success 'rebase -ix with several <CMD>' ' git reset --hard execute && - set_fake_editor && - git rebase -ix "git show HEAD; pwd" HEAD~2 >actual && ( + set_fake_editor && + git rebase -ix "git show HEAD; pwd" HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD;_pwd 2 exec_git_show_HEAD;_pwd" && export FAKE_LINES && git rebase -i HEAD~2 >expect @@ -921,9 +979,9 @@ test_expect_success 'rebase -ix with several <CMD>' ' test_expect_success 'rebase -ix with several instances of --exec' ' git reset --hard execute && - set_fake_editor && - git rebase -i --exec "git show HEAD" --exec "pwd" HEAD~2 >actual && ( + set_fake_editor && + git rebase -i --exec "git show HEAD" --exec "pwd" HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD exec_pwd 2 exec_git_show_HEAD exec_pwd" && export FAKE_LINES && @@ -942,13 +1000,11 @@ test_expect_success C_LOCALE_OUTPUT 'rebase -ix with --autosquash' ' echo bis >bis.txt && git add bis.txt && git commit -m "fixup! two_exec" && - set_fake_editor && - ( - git checkout -b autosquash_actual && - git rebase -i --exec "git show HEAD" --autosquash HEAD~4 >actual - ) && + git checkout -b autosquash_actual && + git rebase -i --exec "git show HEAD" --autosquash HEAD~4 >actual && git checkout autosquash && ( + set_fake_editor && git checkout -b autosquash_expected && FAKE_LINES="1 fixup 3 fixup 4 exec_git_show_HEAD 2 exec_git_show_HEAD" && export FAKE_LINES && @@ -969,7 +1025,6 @@ test_expect_success 'rebase --exec works without -i ' ' test_expect_success 'rebase -i --exec without <CMD>' ' git reset --hard execute && - set_fake_editor && test_must_fail git rebase -i --exec 2>actual && test_i18ngrep "requires a value" actual && git checkout master @@ -977,8 +1032,10 @@ test_expect_success 'rebase -i --exec without <CMD>' ' test_expect_success 'rebase -i --root re-order and drop commits' ' git checkout E && - set_fake_editor && - FAKE_LINES="3 1 2 5" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="3 1 2 5" git rebase -i --root + ) && test E = $(git cat-file commit HEAD | sed -ne \$p) && test B = $(git cat-file commit HEAD^ | sed -ne \$p) && test A = $(git cat-file commit HEAD^^ | sed -ne \$p) && @@ -991,24 +1048,30 @@ test_expect_success 'rebase -i --root retain root commit author and message' ' echo B >file7 && git add file7 && GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" && - set_fake_editor && - FAKE_LINES="2" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="2" git rebase -i --root + ) && git cat-file commit HEAD | grep -q "^author Twerp Snog" && git cat-file commit HEAD | grep -q "^different author$" ' test_expect_success 'rebase -i --root temporary sentinel commit' ' git checkout B && - set_fake_editor && - test_must_fail env FAKE_LINES="2" git rebase -i --root && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="2" git rebase -i --root + ) && git cat-file commit HEAD | grep "^tree $EMPTY_TREE" && git rebase --abort ' test_expect_success 'rebase -i --root fixup root commit' ' git checkout B && - set_fake_editor && - FAKE_LINES="1 fixup 2" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="1 fixup 2" git rebase -i --root + ) && test A = $(git cat-file commit HEAD | sed -ne \$p) && test B = $(git show HEAD:file1) && test 0 = $(git cat-file commit HEAD | grep -c ^parent\ ) @@ -1017,9 +1080,11 @@ test_expect_success 'rebase -i --root fixup root commit' ' test_expect_success 'rebase -i --root reword original root commit' ' test_when_finished "test_might_fail git rebase --abort" && git checkout -b reword-original-root-branch master && - set_fake_editor && - FAKE_LINES="reword 1 2" FAKE_COMMIT_MESSAGE="A changed" \ - git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="reword 1 2" FAKE_COMMIT_MESSAGE="A changed" \ + git rebase -i --root + ) && git show HEAD^ | grep "A changed" && test -z "$(git show -s --format=%p HEAD^)" ' @@ -1027,9 +1092,11 @@ test_expect_success 'rebase -i --root reword original root commit' ' test_expect_success 'rebase -i --root reword new root commit' ' test_when_finished "test_might_fail git rebase --abort" && git checkout -b reword-now-root-branch master && - set_fake_editor && - FAKE_LINES="reword 3 1" FAKE_COMMIT_MESSAGE="C changed" \ - git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="reword 3 1" FAKE_COMMIT_MESSAGE="C changed" \ + git rebase -i --root + ) && git show HEAD^ | grep "C changed" && test -z "$(git show -s --format=%p HEAD^)" ' @@ -1041,8 +1108,10 @@ test_expect_success 'rebase -i --root when root has untracked file conflict' ' git rm file1 && git commit -m "remove file 1 add file 2" && echo z >file1 && - set_fake_editor && - test_must_fail env FAKE_LINES="1 2" git rebase -i --root && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 2" git rebase -i --root + ) && rm file1 && git rebase --continue && test "$(git log -1 --format=%B)" = "remove file 1 add file 2" && @@ -1052,11 +1121,13 @@ test_expect_success 'rebase -i --root when root has untracked file conflict' ' test_expect_success 'rebase -i --root reword root when root has untracked file conflict' ' test_when_finished "reset_rebase" && echo z>file1 && - set_fake_editor && - test_must_fail env FAKE_LINES="reword 1 2" \ - FAKE_COMMIT_MESSAGE="Modified A" git rebase -i --root && - rm file1 && - FAKE_COMMIT_MESSAGE="Reworded A" git rebase --continue && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="reword 1 2" \ + FAKE_COMMIT_MESSAGE="Modified A" git rebase -i --root && + rm file1 && + FAKE_COMMIT_MESSAGE="Reworded A" git rebase --continue + ) && test "$(git log -1 --format=%B HEAD^)" = "Reworded A" && test "$(git rev-list --count HEAD)" = 2 ' @@ -1065,19 +1136,23 @@ test_expect_success C_LOCALE_OUTPUT 'rebase --edit-todo does not work on non-int git checkout reword-original-root-branch && git reset --hard && git checkout conflict-branch && - set_fake_editor && - test_must_fail git rebase -f --onto HEAD~2 HEAD~ && - test_must_fail git rebase --edit-todo && + ( + set_fake_editor && + test_must_fail git rebase -f --apply --onto HEAD~2 HEAD~ && + test_must_fail git rebase --edit-todo + ) && git rebase --abort ' test_expect_success 'rebase --edit-todo can be used to modify todo' ' git reset --hard && git checkout no-conflict-branch^0 && - set_fake_editor && - FAKE_LINES="edit 1 2 3" git rebase -i HEAD~3 && - FAKE_LINES="2 1" git rebase --edit-todo && - git rebase --continue && + ( + set_fake_editor && + FAKE_LINES="edit 1 2 3" git rebase -i HEAD~3 && + FAKE_LINES="2 1" git rebase --edit-todo && + git rebase --continue + ) && test M = $(git cat-file commit HEAD^ | sed -ne \$p) && test L = $(git cat-file commit HEAD | sed -ne \$p) ' @@ -1085,13 +1160,12 @@ test_expect_success 'rebase --edit-todo can be used to modify todo' ' test_expect_success 'rebase -i produces readable reflog' ' git reset --hard && git branch -f branch-reflog-test H && - set_fake_editor && git rebase -i --onto I F branch-reflog-test && cat >expect <<-\EOF && - rebase -i (finish): returning to refs/heads/branch-reflog-test - rebase -i (pick): H - rebase -i (pick): G - rebase -i (start): checkout I + rebase (finish): returning to refs/heads/branch-reflog-test + rebase (pick): H + rebase (pick): G + rebase (start): checkout I EOF git reflog -n4 HEAD | sed "s/[^:]*: //" >actual && @@ -1106,8 +1180,10 @@ test_expect_success 'rebase -i respects core.commentchar' ' sed -e "2,\$s/^/\\\\/" "$1" >"$1.tmp" && mv "$1.tmp" "$1" EOF - test_set_editor "$(pwd)/remove-all-but-first.sh" && - git rebase -i B && + ( + test_set_editor "$(pwd)/remove-all-but-first.sh" && + git rebase -i B + ) && test B = $(git cat-file commit HEAD^ | sed -ne \$p) ' @@ -1116,9 +1192,11 @@ test_expect_success 'rebase -i respects core.commentchar=auto' ' write_script copy-edit-script.sh <<-\EOF && cp "$1" edit-script EOF - test_set_editor "$(pwd)/copy-edit-script.sh" && test_when_finished "git rebase --abort || :" && - git rebase -i HEAD^ && + ( + test_set_editor "$(pwd)/copy-edit-script.sh" && + git rebase -i HEAD^ + ) && test -z "$(grep -ve "^#" -e "^\$" -e "^pick" edit-script)" ' @@ -1153,8 +1231,11 @@ test_expect_success 'interrupted rebase -i with --strategy and -X' ' echo five >conflict && echo Z >file1 && git commit -a -m "one file conflict" && - set_fake_editor && - FAKE_LINES="edit 1 2" git rebase -i --strategy=recursive -Xours conflict-branch && + ( + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i --strategy=recursive \ + -Xours conflict-branch + ) && git rebase --continue && test $(git show conflict-branch:conflict) = $(cat conflict) && test $(cat file1) = Z @@ -1184,19 +1265,34 @@ test_expect_success SHA1 'short SHA-1 setup' ' test_expect_success SHA1 'short SHA-1 collide' ' test_when_finished "reset_rebase && git checkout master" && git checkout collide && + colliding_sha1=6bcda37 && + test $colliding_sha1 = "$(git rev-parse HEAD | cut -c 1-7)" && ( - unset test_tick && - test_tick && - set_fake_editor && - FAKE_COMMIT_MESSAGE="collide2 ac4f2ee" \ - FAKE_LINES="reword 1 2" git rebase -i HEAD~2 - ) + unset test_tick && + test_tick && + set_fake_editor && + FAKE_COMMIT_MESSAGE="collide2 ac4f2ee" \ + FAKE_LINES="reword 1 break 2" git rebase -i HEAD~2 && + test $colliding_sha1 = "$(git rev-parse HEAD | cut -c 1-7)" && + grep "^pick $colliding_sha1 " \ + .git/rebase-merge/git-rebase-todo.tmp && + grep "^pick [0-9a-f]\{40\}" \ + .git/rebase-merge/git-rebase-todo && + grep "^pick [0-9a-f]\{40\}" \ + .git/rebase-merge/git-rebase-todo.backup && + git rebase --continue + ) && + collide2="$(git rev-parse HEAD~1 | cut -c 1-4)" && + collide3="$(git rev-parse collide3 | cut -c 1-4)" && + test "$collide2" = "$collide3" ' test_expect_success 'respect core.abbrev' ' git config core.abbrev 12 && - set_cat_todo_editor && - test_must_fail git rebase -i HEAD~4 >todo-list && + ( + set_cat_todo_editor && + test_must_fail git rebase -i HEAD~4 >todo-list + ) && test 4 = $(grep -c "pick [0-9a-f]\{12,\}" todo-list) ' @@ -1204,16 +1300,20 @@ test_expect_success 'todo count' ' write_script dump-raw.sh <<-\EOF && cat "$1" EOF - test_set_editor "$(pwd)/dump-raw.sh" && - git rebase -i HEAD~4 >actual && + ( + test_set_editor "$(pwd)/dump-raw.sh" && + git rebase -i HEAD~4 >actual + ) && test_i18ngrep "^# Rebase ..* onto ..* ([0-9]" actual ' test_expect_success 'rebase -i commits that overwrite untracked files (pick)' ' git checkout --force branch2 && git clean -f && - set_fake_editor && - FAKE_LINES="edit 1 2" git rebase -i A && + ( + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i A + ) && test_cmp_rev HEAD F && test_path_is_missing file6 && >file6 && @@ -1228,8 +1328,10 @@ test_expect_success 'rebase -i commits that overwrite untracked files (squash)' git checkout --force branch2 && git clean -f && git tag original-branch2 && - set_fake_editor && - FAKE_LINES="edit 1 squash 2" git rebase -i A && + ( + set_fake_editor && + FAKE_LINES="edit 1 squash 2" git rebase -i A + ) && test_cmp_rev HEAD F && test_path_is_missing file6 && >file6 && @@ -1244,8 +1346,10 @@ test_expect_success 'rebase -i commits that overwrite untracked files (squash)' test_expect_success 'rebase -i commits that overwrite untracked files (no ff)' ' git checkout --force branch2 && git clean -f && - set_fake_editor && - FAKE_LINES="edit 1 2" git rebase -i --no-ff A && + ( + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i --no-ff A + ) && test $(git cat-file commit HEAD | sed -ne \$p) = F && test_path_is_missing file6 && >file6 && @@ -1268,8 +1372,10 @@ test_expect_success 'rebase --continue removes CHERRY_PICK_HEAD' ' git tag seq-onto && git reset --hard HEAD~2 && git cherry-pick seq-onto && - set_fake_editor && - test_must_fail env FAKE_LINES= git rebase -i seq-onto && + ( + set_fake_editor && + test_must_fail env FAKE_LINES= git rebase -i seq-onto + ) && test -d .git/rebase-merge && git rebase --continue && git diff --exit-code seq-onto && @@ -1288,8 +1394,10 @@ rebase_setup_and_clean () { test_expect_success 'drop' ' rebase_setup_and_clean drop-test && - set_fake_editor && - FAKE_LINES="1 drop 2 3 d 4 5" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="1 drop 2 3 d 4 5" git rebase -i --root + ) && test E = $(git cat-file commit HEAD | sed -ne \$p) && test C = $(git cat-file commit HEAD^ | sed -ne \$p) && test A = $(git cat-file commit HEAD^^ | sed -ne \$p) @@ -1298,9 +1406,10 @@ test_expect_success 'drop' ' test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' test_config rebase.missingCommitsCheck ignore && rebase_setup_and_clean missing-commit && - set_fake_editor && - FAKE_LINES="1 2 3 4" \ - git rebase -i --root 2>actual && + ( + set_fake_editor && + FAKE_LINES="1 2 3 4" git rebase -i --root 2>actual + ) && test D = $(git cat-file commit HEAD | sed -ne \$p) && test_i18ngrep \ "Successfully rebased and updated refs/heads/missing-commit" \ @@ -1316,9 +1425,10 @@ test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' ' EOF test_config rebase.missingCommitsCheck warn && rebase_setup_and_clean missing-commit && - set_fake_editor && - FAKE_LINES="1 2 3 4" \ - git rebase -i --root 2>actual.2 && + ( + set_fake_editor && + FAKE_LINES="1 2 3 4" git rebase -i --root 2>actual.2 + ) && head -n4 actual.2 >actual && test_i18ncmp expect actual && test D = $(git cat-file commit HEAD | sed -ne \$p) @@ -1340,19 +1450,141 @@ test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' ' EOF test_config rebase.missingCommitsCheck error && rebase_setup_and_clean missing-commit && - set_fake_editor && - test_must_fail env FAKE_LINES="1 2 4" \ - git rebase -i --root 2>actual && - test_i18ncmp expect actual && - cp .git/rebase-merge/git-rebase-todo.backup \ - .git/rebase-merge/git-rebase-todo && - FAKE_LINES="1 2 drop 3 4 drop 5" \ - git rebase --edit-todo && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 4" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + cp .git/rebase-merge/git-rebase-todo.backup \ + .git/rebase-merge/git-rebase-todo && + FAKE_LINES="1 2 drop 3 4 drop 5" git rebase --edit-todo + ) && git rebase --continue && test D = $(git cat-file commit HEAD | sed -ne \$p) && test B = $(git cat-file commit HEAD^ | sed -ne \$p) ' +test_expect_success 'rebase --edit-todo respects rebase.missingCommitsCheck = ignore' ' + test_config rebase.missingCommitsCheck ignore && + rebase_setup_and_clean missing-commit && + ( + set_fake_editor && + FAKE_LINES="break 1 2 3 4 5" git rebase -i --root && + FAKE_LINES="1 2 3 4" git rebase --edit-todo && + git rebase --continue 2>actual + ) && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test_i18ngrep \ + "Successfully rebased and updated refs/heads/missing-commit" \ + actual +' + +test_expect_success 'rebase --edit-todo respects rebase.missingCommitsCheck = warn' ' + cat >expect <<-EOF && + error: invalid line 1: badcmd $(git rev-list --pretty=oneline --abbrev-commit -1 master~4) + Warning: some commits may have been dropped accidentally. + Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + - $(git rev-list --pretty=oneline --abbrev-commit -1 master~4) + To avoid this message, use "drop" to explicitly remove a commit. + EOF + head -n4 expect >expect.2 && + tail -n1 expect >>expect.2 && + tail -n4 expect.2 >expect.3 && + test_config rebase.missingCommitsCheck warn && + rebase_setup_and_clean missing-commit && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="bad 1 2 3 4 5" \ + git rebase -i --root && + cp .git/rebase-merge/git-rebase-todo.backup orig && + FAKE_LINES="2 3 4" git rebase --edit-todo 2>actual.2 && + head -n6 actual.2 >actual && + test_i18ncmp expect actual && + cp orig .git/rebase-merge/git-rebase-todo && + FAKE_LINES="1 2 3 4" git rebase --edit-todo 2>actual.2 && + head -n4 actual.2 >actual && + test_i18ncmp expect.3 actual && + git rebase --continue 2>actual + ) && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test_i18ngrep \ + "Successfully rebased and updated refs/heads/missing-commit" \ + actual +' + +test_expect_success 'rebase --edit-todo respects rebase.missingCommitsCheck = error' ' + cat >expect <<-EOF && + error: invalid line 1: badcmd $(git rev-list --pretty=oneline --abbrev-commit -1 master~4) + Warning: some commits may have been dropped accidentally. + Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + - $(git rev-list --pretty=oneline --abbrev-commit -1 master~4) + To avoid this message, use "drop" to explicitly remove a commit. + + Use '\''git config rebase.missingCommitsCheck'\'' to change the level of warnings. + The possible behaviours are: ignore, warn, error. + + You can fix this with '\''git rebase --edit-todo'\'' and then run '\''git rebase --continue'\''. + Or you can abort the rebase with '\''git rebase --abort'\''. + EOF + tail -n11 expect >expect.2 && + head -n3 expect.2 >expect.3 && + tail -n7 expect.2 >>expect.3 && + test_config rebase.missingCommitsCheck error && + rebase_setup_and_clean missing-commit && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="bad 1 2 3 4 5" \ + git rebase -i --root && + cp .git/rebase-merge/git-rebase-todo.backup orig && + test_must_fail env FAKE_LINES="2 3 4" \ + git rebase --edit-todo 2>actual && + test_i18ncmp expect actual && + test_must_fail git rebase --continue 2>actual && + test_i18ncmp expect.2 actual && + test_must_fail git rebase --edit-todo && + cp orig .git/rebase-merge/git-rebase-todo && + test_must_fail env FAKE_LINES="1 2 3 4" \ + git rebase --edit-todo 2>actual && + test_i18ncmp expect.3 actual && + test_must_fail git rebase --continue 2>actual && + test_i18ncmp expect.3 actual && + cp orig .git/rebase-merge/git-rebase-todo && + FAKE_LINES="1 2 3 4 drop 5" git rebase --edit-todo && + git rebase --continue 2>actual + ) && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test_i18ngrep \ + "Successfully rebased and updated refs/heads/missing-commit" \ + actual +' + +test_expect_success 'rebase.missingCommitsCheck = error after resolving conflicts' ' + test_config rebase.missingCommitsCheck error && + ( + set_fake_editor && + FAKE_LINES="drop 1 break 2 3 4" git rebase -i A E + ) && + git rebase --edit-todo && + test_must_fail git rebase --continue && + echo x >file1 && + git add file1 && + git rebase --continue +' + +test_expect_success 'rebase.missingCommitsCheck = error when editing for a second time' ' + test_config rebase.missingCommitsCheck error && + ( + set_fake_editor && + FAKE_LINES="1 break 2 3" git rebase -i A D && + cp .git/rebase-merge/git-rebase-todo todo && + test_must_fail env FAKE_LINES=2 git rebase --edit-todo && + GIT_SEQUENCE_EDITOR="cp todo" git rebase --edit-todo && + git rebase --continue + ) +' + test_expect_success 'respects rebase.abbreviateCommands with fixup, squash and exec' ' rebase_setup_and_clean abbrevcmd && test_commit "first" file1.txt "first line" first && @@ -1368,21 +1600,27 @@ test_expect_success 'respects rebase.abbreviateCommands with fixup, squash and e x git show HEAD EOF git checkout abbrevcmd && - set_cat_todo_editor && test_config rebase.abbreviateCommands true && - test_must_fail git rebase -i --exec "git show HEAD" \ - --autosquash master >actual && + ( + set_cat_todo_editor && + test_must_fail git rebase -i --exec "git show HEAD" \ + --autosquash master >actual + ) && test_cmp expected actual ' test_expect_success 'static check of bad command' ' rebase_setup_and_clean bad-cmd && - set_fake_editor && - test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \ + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \ git rebase -i --root 2>actual && - test_i18ngrep "badcmd $(git rev-list --oneline -1 master~1)" actual && - test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual && - FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo && + test_i18ngrep "badcmd $(git rev-list --oneline -1 master~1)" \ + actual && + test_i18ngrep "You can fix this with .git rebase --edit-todo.." \ + actual && + FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo + ) && git rebase --continue && test E = $(git cat-file commit HEAD | sed -ne \$p) && test C = $(git cat-file commit HEAD^ | sed -ne \$p) @@ -1398,19 +1636,24 @@ test_expect_success 'tabs and spaces are accepted in the todolist' ' ) >"$1.new" mv "$1.new" "$1" EOF - test_set_editor "$(pwd)/add-indent.sh" && - git rebase -i HEAD^^^ && + ( + test_set_editor "$(pwd)/add-indent.sh" && + git rebase -i HEAD^^^ + ) && test E = $(git cat-file commit HEAD | sed -ne \$p) ' test_expect_success 'static check of bad SHA-1' ' rebase_setup_and_clean bad-sha && - set_fake_editor && - test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \ - git rebase -i --root 2>actual && - test_i18ngrep "edit XXXXXXX False commit" actual && - test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual && - FAKE_LINES="1 2 4 5 6" git rebase --edit-todo && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \ + git rebase -i --root 2>actual && + test_i18ngrep "edit XXXXXXX False commit" actual && + test_i18ngrep "You can fix this with .git rebase --edit-todo.." \ + actual && + FAKE_LINES="1 2 4 5 6" git rebase --edit-todo + ) && git rebase --continue && test E = $(git cat-file commit HEAD | sed -ne \$p) ' @@ -1429,39 +1672,97 @@ test_expect_success 'editor saves as CR/LF' ' test_expect_success 'rebase -i --gpg-sign=<key-id>' ' test_when_finished "test_might_fail git rebase --abort" && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ - >out 2>err && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" \ + HEAD^ >out 2>err + ) && test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err ' test_expect_success 'rebase -i --gpg-sign=<key-id> overrides commit.gpgSign' ' test_when_finished "test_might_fail git rebase --abort" && test_config commit.gpgsign true && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ - >out 2>err && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" \ + HEAD^ >out 2>err + ) && test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err ' test_expect_success 'valid author header after --root swap' ' rebase_setup_and_clean author-header no-conflict-branch && - set_fake_editor && git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit && git cat-file commit HEAD | grep ^author >expected && - FAKE_LINES="5 1" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="5 1" git rebase -i --root + ) && git cat-file commit HEAD^ | grep ^author >actual && test_cmp expected actual ' test_expect_success 'valid author header when author contains single quote' ' rebase_setup_and_clean author-header no-conflict-branch && - set_fake_editor && git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit && git cat-file commit HEAD | grep ^author >expected && - FAKE_LINES="2" git rebase -i HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="2" git rebase -i HEAD~2 + ) && git cat-file commit HEAD | grep ^author >actual && test_cmp expected actual ' +test_expect_success 'post-commit hook is called' ' + test_when_finished "rm -f .git/hooks/post-commit" && + >actual && + mkdir -p .git/hooks && + write_script .git/hooks/post-commit <<-\EOS && + git rev-parse HEAD >>actual + EOS + ( + set_fake_editor && + FAKE_LINES="edit 4 1 reword 2 fixup 3" git rebase -i A E && + echo x>file3 && + git add file3 && + FAKE_COMMIT_MESSAGE=edited git rebase --continue + ) && + git rev-parse HEAD@{5} HEAD@{4} HEAD@{3} HEAD@{2} HEAD@{1} HEAD \ + >expect && + test_cmp expect actual +' + +test_expect_success 'correct error message for partial commit after empty pick' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + FAKE_LINES="2 1 1" && + export FAKE_LINES && + test_must_fail git rebase -i A D + ) && + echo x >file1 && + test_must_fail git commit file1 2>err && + test_i18ngrep "cannot do a partial commit during a rebase." err +' + +test_expect_success 'correct error message for commit --amend after empty pick' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + FAKE_LINES="1 1" && + export FAKE_LINES && + test_must_fail git rebase -i A D + ) && + echo x>file1 && + test_must_fail git commit -a --amend 2>err && + test_i18ngrep "middle of a rebase -- cannot amend." err +' + +# This must be the last test in this file +test_expect_success '$EDITOR and friends are unchanged' ' + test_editor_unchanged +' + test_done diff --git a/t/t3406-rebase-message.sh b/t/t3406-rebase-message.sh index b393e1e9fe..927a4f4a4e 100755 --- a/t/t3406-rebase-message.sh +++ b/t/t3406-rebase-message.sh @@ -18,32 +18,29 @@ test_expect_success 'setup' ' ' test_expect_success 'rebase -m' ' - git rebase -m master >report && - >expect && - sed -n -e "/^Already applied: /p" \ - -e "/^Committed: /p" report >actual && - test_cmp expect actual + git rebase -m master >actual && + test_must_be_empty actual ' test_expect_success 'rebase against master twice' ' - git rebase master >out && + git rebase --apply master >out && test_i18ngrep "Current branch topic is up to date" out ' test_expect_success 'rebase against master twice with --force' ' - git rebase --force-rebase master >out && + git rebase --force-rebase --apply master >out && test_i18ngrep "Current branch topic is up to date, rebase forced" out ' test_expect_success 'rebase against master twice from another branch' ' git checkout topic^ && - git rebase master topic >out && + git rebase --apply master topic >out && test_i18ngrep "Current branch topic is up to date" out ' test_expect_success 'rebase fast-forward to master' ' git checkout topic^ && - git rebase topic >out && + git rebase --apply topic >out && test_i18ngrep "Fast-forwarded HEAD to topic" out ' @@ -95,9 +92,9 @@ test_expect_success 'GIT_REFLOG_ACTION' ' git rebase reflog-onto && git log -g --format=%gs -3 >actual && cat >expect <<-\EOF && - rebase finished: returning to refs/heads/reflog-topic - rebase: reflog-to-rebase - rebase: checkout reflog-onto + rebase (finish): returning to refs/heads/reflog-topic + rebase (pick): reflog-to-rebase + rebase (start): checkout reflog-onto EOF test_cmp expect actual && @@ -105,9 +102,9 @@ test_expect_success 'GIT_REFLOG_ACTION' ' GIT_REFLOG_ACTION=change-the-reflog git rebase reflog-onto && git log -g --format=%gs -3 >actual && cat >expect <<-\EOF && - rebase finished: returning to refs/heads/reflog-prefix - change-the-reflog: reflog-to-rebase - change-the-reflog: checkout reflog-onto + change-the-reflog (finish): returning to refs/heads/reflog-prefix + change-the-reflog (pick): reflog-to-rebase + change-the-reflog (start): checkout reflog-onto EOF test_cmp expect actual ' diff --git a/t/t3407-rebase-abort.sh b/t/t3407-rebase-abort.sh index 910f218284..97efea0f56 100755 --- a/t/t3407-rebase-abort.sh +++ b/t/t3407-rebase-abort.sh @@ -96,14 +96,14 @@ testrebase() { ' } -testrebase "" .git/rebase-apply +testrebase " --apply" .git/rebase-apply testrebase " --merge" .git/rebase-merge -test_expect_success 'rebase --quit' ' +test_expect_success 'rebase --apply --quit' ' cd "$work_dir" && # Clean up the state from the previous one git reset --hard pre-rebase && - test_must_fail git rebase master && + test_must_fail git rebase --apply master && test_path_is_dir .git/rebase-apply && head_before=$(git rev-parse HEAD) && git rebase --quit && diff --git a/t/t3415-rebase-autosquash.sh b/t/t3415-rebase-autosquash.sh index 22d218698e..7bab6000dc 100755 --- a/t/t3415-rebase-autosquash.sh +++ b/t/t3415-rebase-autosquash.sh @@ -25,6 +25,13 @@ test_expect_success setup ' ' test_auto_fixup () { + no_squash= && + if test "x$1" = 'x!' + then + no_squash=true + shift + fi && + git reset --hard base && echo 1 >file1 && git add -u && @@ -35,10 +42,19 @@ test_auto_fixup () { test_tick && git rebase $2 -i HEAD^^^ && git log --oneline >actual && - test_line_count = 3 actual && - git diff --exit-code $1 && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 1 = $(git cat-file commit HEAD^ | grep first | wc -l) + if test -n "$no_squash" + then + test_line_count = 4 actual + else + test_line_count = 3 actual && + git diff --exit-code $1 && + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep first commit >actual && + test_line_count = 1 actual + fi } test_expect_success 'auto fixup (option)' ' @@ -48,12 +64,19 @@ test_expect_success 'auto fixup (option)' ' test_expect_success 'auto fixup (config)' ' git config rebase.autosquash true && test_auto_fixup final-fixup-config-true && - test_must_fail test_auto_fixup fixup-config-true-no --no-autosquash && + test_auto_fixup ! fixup-config-true-no --no-autosquash && git config rebase.autosquash false && - test_must_fail test_auto_fixup final-fixup-config-false + test_auto_fixup ! final-fixup-config-false ' test_auto_squash () { + no_squash= && + if test "x$1" = 'x!' + then + no_squash=true + shift + fi && + git reset --hard base && echo 1 >file1 && git add -u && @@ -64,10 +87,19 @@ test_auto_squash () { test_tick && git rebase $2 -i HEAD^^^ && git log --oneline >actual && - test_line_count = 3 actual && - git diff --exit-code $1 && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 2 = $(git cat-file commit HEAD^ | grep first | wc -l) + if test -n "$no_squash" + then + test_line_count = 4 actual + else + test_line_count = 3 actual && + git diff --exit-code $1 && + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep first commit >actual && + test_line_count = 2 actual + fi } test_expect_success 'auto squash (option)' ' @@ -77,9 +109,9 @@ test_expect_success 'auto squash (option)' ' test_expect_success 'auto squash (config)' ' git config rebase.autosquash true && test_auto_squash final-squash-config-true && - test_must_fail test_auto_squash squash-config-true-no --no-autosquash && + test_auto_squash ! squash-config-true-no --no-autosquash && git config rebase.autosquash false && - test_must_fail test_auto_squash final-squash-config-false + test_auto_squash ! final-squash-config-false ' test_expect_success 'misspelled auto squash' ' @@ -94,7 +126,8 @@ test_expect_success 'misspelled auto squash' ' git log --oneline >actual && test_line_count = 4 actual && git diff --exit-code final-missquash && - test 0 = $(git rev-list final-missquash...HEAD | wc -l) + git rev-list final-missquash...HEAD >list && + test_must_be_empty list ' test_expect_success 'auto squash that matches 2 commits' ' @@ -113,9 +146,15 @@ test_expect_success 'auto squash that matches 2 commits' ' git log --oneline >actual && test_line_count = 4 actual && git diff --exit-code final-multisquash && - test 1 = "$(git cat-file blob HEAD^^:file1)" && - test 2 = $(git cat-file commit HEAD^^ | grep first | wc -l) && - test 1 = $(git cat-file commit HEAD | grep first | wc -l) + echo 1 >expect && + git cat-file blob HEAD^^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^^ >commit && + grep first commit >actual && + test_line_count = 2 actual && + git cat-file commit HEAD >commit && + grep first commit >actual && + test_line_count = 1 actual ' test_expect_success 'auto squash that matches a commit after the squash' ' @@ -134,25 +173,38 @@ test_expect_success 'auto squash that matches a commit after the squash' ' git log --oneline >actual && test_line_count = 5 actual && git diff --exit-code final-presquash && - test 0 = "$(git cat-file blob HEAD^^:file1)" && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 1 = $(git cat-file commit HEAD | grep third | wc -l) && - test 1 = $(git cat-file commit HEAD^ | grep third | wc -l) + echo 0 >expect && + git cat-file blob HEAD^^:file1 >actual && + test_cmp expect actual && + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD >commit && + grep third commit >actual && + test_line_count = 1 actual && + git cat-file commit HEAD^ >commit && + grep third commit >actual && + test_line_count = 1 actual ' test_expect_success 'auto squash that matches a sha1' ' git reset --hard base && echo 1 >file1 && git add -u && test_tick && - git commit -m "squash! $(git rev-parse --short HEAD^)" && + oid=$(git rev-parse --short HEAD^) && + git commit -m "squash! $oid" && git tag final-shasquash && test_tick && git rebase --autosquash -i HEAD^^^ && git log --oneline >actual && test_line_count = 3 actual && git diff --exit-code final-shasquash && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 1 = $(git cat-file commit HEAD^ | grep squash | wc -l) + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep squash commit >actual && + test_line_count = 1 actual ' test_expect_success 'auto squash that matches longer sha1' ' @@ -160,15 +212,20 @@ test_expect_success 'auto squash that matches longer sha1' ' echo 1 >file1 && git add -u && test_tick && - git commit -m "squash! $(git rev-parse --short=11 HEAD^)" && + oid=$(git rev-parse --short=11 HEAD^) && + git commit -m "squash! $oid" && git tag final-longshasquash && test_tick && git rebase --autosquash -i HEAD^^^ && git log --oneline >actual && test_line_count = 3 actual && git diff --exit-code final-longshasquash && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 1 = $(git cat-file commit HEAD^ | grep squash | wc -l) + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep squash commit >actual && + test_line_count = 1 actual ' test_auto_commit_flags () { @@ -183,8 +240,12 @@ test_auto_commit_flags () { git log --oneline >actual && test_line_count = 3 actual && git diff --exit-code final-commit-$1 && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test $2 = $(git cat-file commit HEAD^ | grep first | wc -l) + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep first commit >actual && + test_line_count = $2 actual } test_expect_success 'use commit --fixup' ' @@ -210,11 +271,15 @@ test_auto_fixup_fixup () { ( set_cat_todo_editor && test_must_fail git rebase --autosquash -i HEAD^^^^ >actual && + head=$(git rev-parse --short HEAD) && + parent1=$(git rev-parse --short HEAD^) && + parent2=$(git rev-parse --short HEAD^^) && + parent3=$(git rev-parse --short HEAD^^^) && cat >expected <<-EOF && - pick $(git rev-parse --short HEAD^^^) first commit - $1 $(git rev-parse --short HEAD^) $1! first - $1 $(git rev-parse --short HEAD) $1! $2! first - pick $(git rev-parse --short HEAD^^) second commit + pick $parent3 first commit + $1 $parent1 $1! first + $1 $head $1! $2! first + pick $parent2 second commit EOF test_cmp expected actual ) && @@ -222,13 +287,17 @@ test_auto_fixup_fixup () { git log --oneline >actual && test_line_count = 3 actual git diff --exit-code "final-$1-$2" && - test 2 = "$(git cat-file blob HEAD^:file1)" && + echo 2 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep first commit >actual && if test "$1" = "fixup" then - test 1 = $(git cat-file commit HEAD^ | grep first | wc -l) + test_line_count = 1 actual elif test "$1" = "squash" then - test 3 = $(git cat-file commit HEAD^ | grep first | wc -l) + test_line_count = 3 actual else false fi @@ -256,19 +325,25 @@ test_expect_success C_LOCALE_OUTPUT 'autosquash with custom inst format' ' echo 2 >file1 && git add -u && test_tick && - git commit -m "squash! $(git rev-parse --short HEAD^)" && + oid=$(git rev-parse --short HEAD^) && + git commit -m "squash! $oid" && echo 1 >file1 && git add -u && test_tick && - git commit -m "squash! $(git log -n 1 --format=%s HEAD~2)" && + subject=$(git log -n 1 --format=%s HEAD~2) && + git commit -m "squash! $subject" && git tag final-squash-instFmt && test_tick && git rebase --autosquash -i HEAD~4 && git log --oneline >actual && test_line_count = 3 actual && git diff --exit-code final-squash-instFmt && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 2 = $(git cat-file commit HEAD^ | grep squash | wc -l) + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep squash commit >actual && + test_line_count = 2 actual ' test_expect_success 'autosquash with empty custom instructionFormat' ' @@ -349,4 +424,20 @@ test_expect_success 'abort last squash' ' ! grep first actual ' +test_expect_success 'fixup a fixup' ' + echo 0to-fixup >file0 && + test_tick && + git commit -m "to-fixup" file0 && + test_tick && + git commit --squash HEAD -m X --allow-empty && + test_tick && + git commit --squash HEAD^ -m Y --allow-empty && + test_tick && + git commit -m "squash! $(git rev-parse HEAD^)" -m Z --allow-empty && + test_tick && + git commit -m "squash! $(git rev-parse HEAD^^)" -m W --allow-empty && + git rebase -ki --autosquash HEAD~5 && + test XZWY = $(git show | tr -cd W-Z) +' + test_done diff --git a/t/t3417-rebase-whitespace-fix.sh b/t/t3417-rebase-whitespace-fix.sh index e85cdc7037..946e92f8da 100755 --- a/t/t3417-rebase-whitespace-fix.sh +++ b/t/t3417-rebase-whitespace-fix.sh @@ -52,7 +52,7 @@ test_expect_success 'blank line at end of file; extend at end of file' ' git commit --allow-empty -m "Initial empty commit" && git add file && git commit -m first && mv second file && - git add file && git commit -m second && + git add file && git commit -m second && git rebase --whitespace=fix HEAD^^ && git diff --exit-code HEAD^:file expect-first && test_cmp expect-second file @@ -118,7 +118,7 @@ test_expect_success 'at beginning of file' ' for i in 1 2 3 4 5; do echo $i done >> file && - git commit -m more file && + git commit -m more file && git rebase --whitespace=fix HEAD^^ && test_cmp expect-beginning file ' diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh index 49f548cdb9..1f32faa4a4 100755 --- a/t/t3419-rebase-patch-id.sh +++ b/t/t3419-rebase-patch-id.sh @@ -4,15 +4,6 @@ test_description='git rebase - test patch id computation' . ./test-lib.sh -count () { - i=0 - while test $i -lt $1 - do - echo "$i" - i=$(($i+1)) - done -} - scramble () { i=0 while read x @@ -26,75 +17,55 @@ scramble () { mv -f "$1.new" "$1" } -run () { - echo \$ "$@" - /usr/bin/time "$@" >/dev/null -} - test_expect_success 'setup' ' git commit --allow-empty -m initial && git tag root ' -do_tests () { - nlines=$1 pr=${2-} - - test_expect_success $pr "setup: $nlines lines" " - rm -f .gitattributes && - git checkout -q -f master && - git reset --hard root && - count $nlines >file && - git add file && - git commit -q -m initial && - git branch -f other && - - scramble file && - git add file && - git commit -q -m 'change big file' && - - git checkout -q other && - : >newfile && - git add newfile && - git commit -q -m 'add small file' && - - git cherry-pick master >/dev/null 2>&1 - " - - test_debug " - run git diff master^\! - " - - test_expect_success $pr 'setup attributes' " - echo 'file binary' >.gitattributes - " - - test_debug " - run git format-patch --stdout master && - run git format-patch --stdout --ignore-if-in-upstream master - " +test_expect_success 'setup: 500 lines' ' + rm -f .gitattributes && + git checkout -q -f master && + git reset --hard root && + test_seq 500 >file && + git add file && + git commit -q -m initial && + git branch -f other && + + scramble file && + git add file && + git commit -q -m "change big file" && + + git checkout -q other && + : >newfile && + git add newfile && + git commit -q -m "add small file" && + + git cherry-pick master >/dev/null 2>&1 +' - test_expect_success $pr 'detect upstream patch' ' - git checkout -q master && - scramble file && - git add file && - git commit -q -m "change big file again" && - git checkout -q other^{} && - git rebase master && - test_must_fail test -n "$(git rev-list master...HEAD~)" - ' +test_expect_success 'setup attributes' ' + echo "file binary" >.gitattributes +' - test_expect_success $pr 'do not drop patch' ' - git branch -f squashed master && - git checkout -q -f squashed && - git reset -q --soft HEAD~2 && - git commit -q -m squashed && - git checkout -q other^{} && - test_must_fail git rebase squashed && - rm -rf .git/rebase-apply - ' -} +test_expect_success 'detect upstream patch' ' + git checkout -q master && + scramble file && + git add file && + git commit -q -m "change big file again" && + git checkout -q other^{} && + git rebase master && + git rev-list master...HEAD~ >revs && + test_must_be_empty revs +' -do_tests 500 -do_tests 50000 EXPENSIVE +test_expect_success 'do not drop patch' ' + git branch -f squashed master && + git checkout -q -f squashed && + git reset -q --soft HEAD~2 && + git commit -q -m squashed && + git checkout -q other^{} && + test_must_fail git rebase squashed && + git rebase --quit +' test_done diff --git a/t/t3420-rebase-autostash.sh b/t/t3420-rebase-autostash.sh index 5f7e73cf83..ca331733fb 100755 --- a/t/t3420-rebase-autostash.sh +++ b/t/t3420-rebase-autostash.sh @@ -34,7 +34,7 @@ test_expect_success setup ' remove_progress_re="$(printf "s/.*\\r//")" ' -create_expected_success_am () { +create_expected_success_apply () { cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) First, rewinding head to replay your work on top of it... @@ -44,7 +44,7 @@ create_expected_success_am () { EOF } -create_expected_success_interactive () { +create_expected_success_merge () { q_to_cr >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) Applied autostash. @@ -52,7 +52,7 @@ create_expected_success_interactive () { EOF } -create_expected_failure_am () { +create_expected_failure_apply () { cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) First, rewinding head to replay your work on top of it... @@ -64,7 +64,7 @@ create_expected_failure_am () { EOF } -create_expected_failure_interactive () { +create_expected_failure_merge () { cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) Applying autostash resulted in conflicts. @@ -101,9 +101,9 @@ testrebase () { test_expect_success "rebase$type --autostash: check output" ' test_when_finished git branch -D rebased-feature-branch && - suffix=${type#\ --} && suffix=${suffix:-am} && - if test ${suffix} = "merge"; then - suffix=interactive + suffix=${type#\ --} && suffix=${suffix:-apply} && + if test ${suffix} = "interactive"; then + suffix=merge fi && create_expected_success_$suffix && sed "$remove_progress_re" <actual >actual2 && @@ -184,6 +184,26 @@ testrebase () { git checkout feature-branch ' + test_expect_success "rebase$type: --quit" ' + test_config rebase.autostash true && + git reset --hard && + git checkout -b rebased-feature-branch feature-branch && + test_when_finished git branch -D rebased-feature-branch && + echo dirty >>file3 && + git diff >expect && + test_must_fail git rebase$type related-onto-branch && + test_path_is_file $dotest/autostash && + test_path_is_missing file3 && + git rebase --quit && + test_when_finished git stash drop && + test_path_is_missing $dotest/autostash && + ! grep dirty file3 && + git stash show -p >actual && + test_cmp expect actual && + git reset --hard && + git checkout feature-branch + ' + test_expect_success "rebase$type: non-conflicting rebase, conflicting stash" ' test_config rebase.autostash true && git reset --hard && @@ -202,9 +222,9 @@ testrebase () { test_expect_success "rebase$type: check output with conflicting stash" ' test_when_finished git branch -D rebased-feature-branch && - suffix=${type#\ --} && suffix=${suffix:-am} && - if test ${suffix} = "merge"; then - suffix=interactive + suffix=${type#\ --} && suffix=${suffix:-apply} && + if test ${suffix} = "interactive"; then + suffix=merge fi && create_expected_failure_$suffix && sed "$remove_progress_re" <actual >actual2 && @@ -234,7 +254,7 @@ test_expect_success "rebase: noop rebase" ' git checkout feature-branch ' -testrebase "" .git/rebase-apply +testrebase " --apply" .git/rebase-apply testrebase " --merge" .git/rebase-merge testrebase " --interactive" .git/rebase-merge diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index b847064f91..4a9204b4b6 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -26,7 +26,7 @@ test_run_rebase () { test_linear_range 'd e' c.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -50,7 +50,7 @@ test_run_rebase () { test_cmp_rev e HEAD " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -61,12 +61,12 @@ test_run_rebase () { test_expect_$result "rebase $* -f rewrites even if upstream is an ancestor" " reset_rebase && git rebase $* -f b e && - ! test_cmp_rev e HEAD && + test_cmp_rev ! e HEAD && test_cmp_rev b HEAD~2 && test_linear_range 'd e' b.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success --fork-point test_run_rebase success -m test_run_rebase success -i @@ -78,12 +78,12 @@ test_run_rebase () { test_expect_$result "rebase $* -f rewrites even if remote upstream is an ancestor" " reset_rebase && git rebase $* -f branch-b branch-e && - ! test_cmp_rev branch-e origin/branch-e && + test_cmp_rev ! branch-e origin/branch-e && test_cmp_rev branch-b HEAD~2 && test_linear_range 'd e' branch-b.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success --fork-point test_run_rebase success -m test_run_rebase success -i @@ -98,7 +98,7 @@ test_run_rebase () { test_cmp_rev e HEAD " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success --fork-point test_run_rebase success -m test_run_rebase success -i @@ -139,7 +139,7 @@ test_run_rebase () { test_linear_range 'd i' h.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -154,7 +154,7 @@ test_run_rebase () { test_linear_range 'd' h.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -169,7 +169,7 @@ test_run_rebase () { test_linear_range 'd i' f.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -184,7 +184,7 @@ test_run_rebase () { test_linear_range 'd gp i' h.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -205,32 +205,31 @@ test_expect_success 'setup of linear history for empty commit tests' ' test_run_rebase () { result=$1 shift - test_expect_$result "rebase $* drops empty commit" " + test_expect_$result "rebase $* keeps begin-empty commits" " reset_rebase && - git rebase $* c l && - test_cmp_rev c HEAD~2 && - test_linear_range 'd l' c.. + git rebase $* j l && + test_cmp_rev c HEAD~4 && + test_linear_range 'j d k l' c.. " } -test_run_rebase success '' +test_run_rebase failure --apply test_run_rebase success -m test_run_rebase success -i -test_have_prereq !REBASE_P || test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 shift - test_expect_$result "rebase $* --keep-empty" " + test_expect_$result "rebase $* --no-keep-empty drops begin-empty commits" " reset_rebase && - git rebase $* --keep-empty c l && - test_cmp_rev c HEAD~3 && - test_linear_range 'd k l' c.. + git rebase $* --no-keep-empty c l && + test_cmp_rev c HEAD~2 && + test_linear_range 'd l' c.. " } -test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_have_prereq !REBASE_P || test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -242,10 +241,9 @@ test_run_rebase () { test_linear_range 'd k l' j.. " } -test_run_rebase success '' test_run_rebase success -m test_run_rebase success -i -test_have_prereq !REBASE_P || test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase success --rebase-merges # m @@ -282,7 +280,7 @@ test_run_rebase () { test_linear_range 'x y' c.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -297,7 +295,7 @@ test_run_rebase () { test_linear_range 'x y' c.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase failure -p @@ -312,7 +310,7 @@ test_run_rebase () { test_linear_range 'x y' m.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -328,7 +326,7 @@ test_run_rebase () { " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase failure -p @@ -343,7 +341,7 @@ test_run_rebase () { test_linear_range 'x y' m.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase failure -p @@ -368,7 +366,7 @@ test_run_rebase () { test_expect_$result "rebase $* -f --root on linear history causes re-write" " reset_rebase && git rebase $* -f --root c && - ! test_cmp_rev a HEAD~2 && + test_cmp_rev ! a HEAD~2 && test_linear_range 'a b c' HEAD " } diff --git a/t/t3424-rebase-empty.sh b/t/t3424-rebase-empty.sh new file mode 100755 index 0000000000..5e1045a0af --- /dev/null +++ b/t/t3424-rebase-empty.sh @@ -0,0 +1,170 @@ +#!/bin/sh + +test_description='git rebase of commits that start or become empty' + +. ./test-lib.sh + +test_expect_success 'setup test repository' ' + test_write_lines 1 2 3 4 5 6 7 8 9 10 >numbers && + test_write_lines A B C D E F G H I J >letters && + git add numbers letters && + git commit -m A && + + git branch upstream && + git branch localmods && + + git checkout upstream && + test_write_lines A B C D E >letters && + git add letters && + git commit -m B && + + test_write_lines 1 2 3 4 five 6 7 8 9 ten >numbers && + git add numbers && + git commit -m C && + + git checkout localmods && + test_write_lines 1 2 3 4 five 6 7 8 9 10 >numbers && + git add numbers && + git commit -m C2 && + + git commit --allow-empty -m D && + + test_write_lines A B C D E >letters && + git add letters && + git commit -m "Five letters ought to be enough for anybody" +' + +test_expect_failure 'rebase (apply-backend)' ' + test_when_finished "git rebase --abort" && + git checkout -B testing localmods && + # rebase (--apply) should not drop commits that start empty + git rebase --apply upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=drop' ' + git checkout -B testing localmods && + git rebase --merge --empty=drop upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge uses default of --empty=drop' ' + git checkout -B testing localmods && + git rebase --merge upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=keep' ' + git checkout -B testing localmods && + git rebase --merge --empty=keep upstream && + + test_write_lines D C2 C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=ask' ' + git checkout -B testing localmods && + test_must_fail git rebase --merge --empty=ask upstream && + + git rebase --skip && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --interactive --empty=drop' ' + git checkout -B testing localmods && + git rebase --interactive --empty=drop upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --interactive --empty=keep' ' + git checkout -B testing localmods && + git rebase --interactive --empty=keep upstream && + + test_write_lines D C2 C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --interactive --empty=ask' ' + git checkout -B testing localmods && + test_must_fail git rebase --interactive --empty=ask upstream && + + git rebase --skip && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --interactive uses default of --empty=ask' ' + git checkout -B testing localmods && + test_must_fail git rebase --interactive upstream && + + git rebase --skip && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=drop --keep-empty' ' + git checkout -B testing localmods && + git rebase --merge --empty=drop --keep-empty upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=drop --no-keep-empty' ' + git checkout -B testing localmods && + git rebase --merge --empty=drop --no-keep-empty upstream && + + test_write_lines C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=keep --keep-empty' ' + git checkout -B testing localmods && + git rebase --merge --empty=keep --keep-empty upstream && + + test_write_lines D C2 C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=keep --no-keep-empty' ' + git checkout -B testing localmods && + git rebase --merge --empty=keep --no-keep-empty upstream && + + test_write_lines C2 C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge does not leave state laying around' ' + git checkout -B testing localmods~2 && + git rebase --merge upstream && + + test_path_is_missing .git/CHERRY_PICK_HEAD && + test_path_is_missing .git/MERGE_MSG +' + +test_done diff --git a/t/t3425-rebase-topology-merges.sh b/t/t3425-rebase-topology-merges.sh index fd8efe84fe..e42faa44e7 100755 --- a/t/t3425-rebase-topology-merges.sh +++ b/t/t3425-rebase-topology-merges.sh @@ -54,7 +54,7 @@ test_run_rebase () { test_linear_range 'n o' e.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i @@ -70,7 +70,7 @@ test_run_rebase () { test_linear_range "\'"$expected"\'" d.. " } -test_run_rebase success 'n o e' '' +test_run_rebase success 'n o e' --apply test_run_rebase success 'n o e' -m test_run_rebase success 'n o e' -i @@ -86,7 +86,7 @@ test_run_rebase () { test_linear_range "\'"$expected"\'" c.. " } -test_run_rebase success 'd n o e' '' +test_run_rebase success 'd n o e' --apply test_run_rebase success 'd n o e' -m test_run_rebase success 'd n o e' -i @@ -102,7 +102,7 @@ test_run_rebase () { test_linear_range "\'"$expected"\'" c.. " } -test_run_rebase success 'd n o e' '' +test_run_rebase success 'd n o e' --apply test_run_rebase success 'd n o e' -m test_run_rebase success 'd n o e' -i diff --git a/t/t3427-rebase-subtree.sh b/t/t3427-rebase-subtree.sh index bec48e6a1f..79e43a370b 100755 --- a/t/t3427-rebase-subtree.sh +++ b/t/t3427-rebase-subtree.sh @@ -85,23 +85,23 @@ test_expect_failure REBASE_P 'Rebase -Xsubtree --keep-empty --preserve-merges -- verbose test "$(commit_message HEAD)" = "Empty commit" ' -test_expect_success 'Rebase -Xsubtree --keep-empty --onto commit' ' +test_expect_success 'Rebase -Xsubtree --empty=ask --onto commit' ' reset_rebase && git checkout -b rebase-onto to-rebase && - test_must_fail git rebase -Xsubtree=files_subtree --keep-empty --onto files-master master && + test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --onto files-master master && : first pick results in no changes && - git rebase --continue && + git rebase --skip && verbose test "$(commit_message HEAD~2)" = "master4" && verbose test "$(commit_message HEAD~)" = "files_subtree/master5" && verbose test "$(commit_message HEAD)" = "Empty commit" ' -test_expect_success 'Rebase -Xsubtree --keep-empty --rebase-merges --onto commit' ' +test_expect_success 'Rebase -Xsubtree --empty=ask --rebase-merges --onto commit' ' reset_rebase && git checkout -b rebase-merges-onto to-rebase && - test_must_fail git rebase -Xsubtree=files_subtree --keep-empty --rebase-merges --onto files-master --root && + test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --rebase-merges --onto files-master --root && : first pick results in no changes && - git rebase --continue && + git rebase --skip && verbose test "$(commit_message HEAD~2)" = "master4" && verbose test "$(commit_message HEAD~)" = "files_subtree/master5" && verbose test "$(commit_message HEAD)" = "Empty commit" diff --git a/t/t3429-rebase-edit-todo.sh b/t/t3429-rebase-edit-todo.sh index 8739cb60a7..7024d49ae7 100755 --- a/t/t3429-rebase-edit-todo.sh +++ b/t/t3429-rebase-edit-todo.sh @@ -17,7 +17,7 @@ test_expect_success 'rebase exec modifies rebase-todo' ' test -e F ' -test_expect_success SHA1 'loose object cache vs re-reading todo list' ' +test_expect_success 'loose object cache vs re-reading todo list' ' GIT_REBASE_TODO=.git/rebase-merge/git-rebase-todo && export GIT_REBASE_TODO && write_script append-todo.sh <<-\EOS && @@ -52,4 +52,34 @@ test_expect_success 'todo is re-read after reword and squash' ' test_cmp expected actual ' +test_expect_success 're-reading todo doesnt interfere with revert --edit' ' + git reset --hard third && + + git revert --edit third second && + + cat >expect <<-\EOF && + Revert "second" + Revert "third" + third + second + first + EOF + git log --format="%s" >actual && + test_cmp expect actual +' + +test_expect_success 're-reading todo doesnt interfere with cherry-pick --edit' ' + git reset --hard first && + + git cherry-pick --edit second third && + + cat >expect <<-\EOF && + third + second + first + EOF + git log --format="%s" >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3430-rebase-merges.sh b/t/t3430-rebase-merges.sh index 9efcf4808a..a1bc3e2001 100755 --- a/t/t3430-rebase-merges.sh +++ b/t/t3430-rebase-merges.sh @@ -20,12 +20,11 @@ Initial setup: ' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-rebase.sh +. "$TEST_DIRECTORY"/lib-log-graph.sh test_cmp_graph () { cat >expect && - git log --graph --boundary --format=%s "$@" >output && - sed "s/ *$//" <output >output.trimmed && - test_cmp expect output.trimmed + lib_test_cmp_graph --boundary --format=%s "$@" } test_expect_success 'setup' ' @@ -346,7 +345,7 @@ test_expect_success 'A root commit can be a cousin, treat it that way' ' git merge --allow-unrelated-histories khnum && test_tick && git rebase -f -r HEAD^ && - ! test_cmp_rev HEAD^2 khnum && + test_cmp_rev ! HEAD^2 khnum && test_cmp_graph HEAD^.. <<-\EOF && * Merge branch '\''khnum'\'' into asherah |\ @@ -408,7 +407,7 @@ test_expect_success 'octopus merges' ' | | * three | * | two | |/ - * | one + * / one |/ o before-octopus EOF @@ -468,4 +467,31 @@ test_expect_success '--rebase-merges with strategies' ' test_cmp expect G.t ' +test_expect_success '--rebase-merges with commit that can generate bad characters for filename' ' + git checkout -b colon-in-label E && + git merge -m "colon: this should work" G && + git rebase --rebase-merges --force-rebase E +' + +test_expect_success '--rebase-merges with message matched with onto label' ' + git checkout -b onto-label E && + git merge -m onto G && + git rebase --rebase-merges --force-rebase E && + test_cmp_graph <<-\EOF + * onto + |\ + | * G + | * F + * | E + |\ \ + | * | B + * | | D + | |/ + |/| + * | C + |/ + * A + EOF +' + test_done diff --git a/t/t3431-rebase-fork-point.sh b/t/t3431-rebase-fork-point.sh index 78851b9a2a..172562789e 100755 --- a/t/t3431-rebase-fork-point.sh +++ b/t/t3431-rebase-fork-point.sh @@ -47,11 +47,31 @@ test_rebase 'G F B A' --keep-base test_rebase 'G F C E D B A' --no-fork-point test_rebase 'G F C D B A' --no-fork-point --onto D test_rebase 'G F C B A' --no-fork-point --keep-base + test_rebase 'G F E D B A' --fork-point refs/heads/master +test_rebase 'G F E D B A' --fork-point master + test_rebase 'G F D B A' --fork-point --onto D refs/heads/master +test_rebase 'G F D B A' --fork-point --onto D master + test_rebase 'G F B A' --fork-point --keep-base refs/heads/master +test_rebase 'G F B A' --fork-point --keep-base master + test_rebase 'G F C E D B A' refs/heads/master +test_rebase 'G F C E D B A' master + test_rebase 'G F C D B A' --onto D refs/heads/master +test_rebase 'G F C D B A' --onto D master + test_rebase 'G F C B A' --keep-base refs/heads/master +test_rebase 'G F C B A' --keep-base master + +test_expect_success 'git rebase --fork-point with ambigous refname' ' + git checkout master && + git checkout -b one && + git checkout side && + git tag one && + test_must_fail git rebase --fork-point --onto D one +' test_done diff --git a/t/t3432-rebase-fast-forward.sh b/t/t3432-rebase-fast-forward.sh index 034ffc7e76..6f0452c0ea 100755 --- a/t/t3432-rebase-fast-forward.sh +++ b/t/t3432-rebase-fast-forward.sh @@ -28,8 +28,12 @@ test_rebase_same_head () { shift && cmp_f="$1" && shift && - test_rebase_same_head_ $status_n $what_n $cmp_n "" "$*" && - test_rebase_same_head_ $status_f $what_f $cmp_f " --no-ff" "$*" + test_rebase_same_head_ $status_n $what_n $cmp_n 0 " --apply" "$*" && + test_rebase_same_head_ $status_f $what_f $cmp_f 0 " --apply --no-ff" "$*" + test_rebase_same_head_ $status_n $what_n $cmp_n 0 " --merge" "$*" && + test_rebase_same_head_ $status_f $what_f $cmp_f 0 " --merge --no-ff" "$*" + test_rebase_same_head_ $status_n $what_n $cmp_n 1 " --merge" "$*" && + test_rebase_same_head_ $status_f $what_f $cmp_f 1 " --merge --no-ff" "$*" } test_rebase_same_head_ () { @@ -39,24 +43,32 @@ test_rebase_same_head_ () { shift && cmp="$1" && shift && + abbreviate="$1" && + shift && flag="$1" shift && - test_expect_$status "git rebase$flag $* with $changes is $what with $cmp HEAD" " + if test $abbreviate -eq 1 + then + msg="git rebase$flag $* (rebase.abbreviateCommands = true) with $changes is $what with $cmp HEAD" + else + msg="git rebase$flag $* with $changes is $what with $cmp HEAD" + fi && + test_expect_$status "$msg" " + if test $abbreviate -eq 1 + then + test_config rebase.abbreviateCommands true + fi && oldhead=\$(git rev-parse HEAD) && test_when_finished 'git reset --hard \$oldhead' && + cp .git/logs/HEAD expect && git rebase$flag $* >stdout && if test $what = work then - # Must check this case first, for 'is up to - # date, rebase forced[...]rewinding head' cases - test_i18ngrep 'rewinding head' stdout + old=\$(wc -l <expect) && + test_line_count '-gt' \$old .git/logs/HEAD elif test $what = noop then - test_i18ngrep 'is up to date' stdout && - test_i18ngrep ! 'rebase forced' stdout - elif test $what = noop-force - then - test_i18ngrep 'is up to date, rebase forced' stdout + test_cmp expect .git/logs/HEAD fi && newhead=\$(git rev-parse HEAD) && if test $cmp = same @@ -64,21 +76,21 @@ test_rebase_same_head_ () { test_cmp_rev \$oldhead \$newhead elif test $cmp = diff then - ! test_cmp_rev \$oldhead \$newhead + test_cmp_rev ! \$oldhead \$newhead fi " } changes='no changes' test_rebase_same_head success noop same success work same -test_rebase_same_head success noop same success noop-force same master -test_rebase_same_head success noop same success noop-force diff --onto B B -test_rebase_same_head success noop same success noop-force diff --onto B... B -test_rebase_same_head success noop same success noop-force same --onto master... master -test_rebase_same_head success noop same success noop-force same --keep-base master -test_rebase_same_head success noop same success noop-force same --keep-base -test_rebase_same_head success noop same success noop-force same --no-fork-point -test_rebase_same_head success noop same success noop-force same --keep-base --no-fork-point +test_rebase_same_head success noop same success work same master +test_rebase_same_head success noop same success work diff --onto B B +test_rebase_same_head success noop same success work diff --onto B... B +test_rebase_same_head success noop same success work same --onto master... master +test_rebase_same_head success noop same success work same --keep-base master +test_rebase_same_head success noop same success work same --keep-base +test_rebase_same_head success noop same success work same --no-fork-point +test_rebase_same_head success noop same success work same --keep-base --no-fork-point test_rebase_same_head success noop same success work same --fork-point master test_rebase_same_head success noop same success work diff --fork-point --onto B B test_rebase_same_head success noop same success work diff --fork-point --onto B... B @@ -91,14 +103,14 @@ test_expect_success 'add work same to side' ' changes='our changes' test_rebase_same_head success noop same success work same -test_rebase_same_head success noop same success noop-force same master -test_rebase_same_head success noop same success noop-force diff --onto B B -test_rebase_same_head success noop same success noop-force diff --onto B... B -test_rebase_same_head success noop same success noop-force same --onto master... master -test_rebase_same_head success noop same success noop-force same --keep-base master -test_rebase_same_head success noop same success noop-force same --keep-base -test_rebase_same_head success noop same success noop-force same --no-fork-point -test_rebase_same_head success noop same success noop-force same --keep-base --no-fork-point +test_rebase_same_head success noop same success work same master +test_rebase_same_head success noop same success work diff --onto B B +test_rebase_same_head success noop same success work diff --onto B... B +test_rebase_same_head success noop same success work same --onto master... master +test_rebase_same_head success noop same success work same --keep-base master +test_rebase_same_head success noop same success work same --keep-base +test_rebase_same_head success noop same success work same --no-fork-point +test_rebase_same_head success noop same success work same --keep-base --no-fork-point test_rebase_same_head success noop same success work same --fork-point master test_rebase_same_head success noop same success work diff --fork-point --onto B B test_rebase_same_head success noop same success work diff --fork-point --onto B... B @@ -112,8 +124,8 @@ test_expect_success 'add work same to upstream' ' ' changes='our and their changes' -test_rebase_same_head success noop same success noop-force diff --onto B B -test_rebase_same_head success noop same success noop-force diff --onto B... B +test_rebase_same_head success noop same success work diff --onto B B +test_rebase_same_head success noop same success work diff --onto B... B test_rebase_same_head success noop same success work diff --onto master... master test_rebase_same_head success noop same success work diff --keep-base master test_rebase_same_head success noop same success work diff --keep-base diff --git a/t/t3433-rebase-across-mode-change.sh b/t/t3433-rebase-across-mode-change.sh new file mode 100755 index 0000000000..05df964670 --- /dev/null +++ b/t/t3433-rebase-across-mode-change.sh @@ -0,0 +1,48 @@ +#!/bin/sh + +test_description='git rebase across mode change' + +. ./test-lib.sh + +test_expect_success 'setup' ' + mkdir DS && + >DS/whatever && + git add DS && + git commit -m base && + + git branch side1 && + git branch side2 && + + git checkout side1 && + git rm -rf DS && + test_ln_s_add unrelated DS && + git commit -m side1 && + + git checkout side2 && + >unrelated && + git add unrelated && + git commit -m commit1 && + + echo >>unrelated && + git commit -am commit2 +' + +test_expect_success 'rebase changes with the apply backend' ' + test_when_finished "git rebase --abort || true" && + git checkout -b apply-backend side2 && + git rebase side1 +' + +test_expect_success 'rebase changes with the merge backend' ' + test_when_finished "git rebase --abort || true" && + git checkout -b merge-backend side2 && + git rebase -m side1 +' + +test_expect_success 'rebase changes with the merge backend with a delay' ' + test_when_finished "git rebase --abort || true" && + git checkout -b merge-delay-backend side2 && + git rebase -m --exec "sleep 1" side1 +' + +test_done diff --git a/t/t3434-rebase-i18n.sh b/t/t3434-rebase-i18n.sh new file mode 100755 index 0000000000..c7c835cde9 --- /dev/null +++ b/t/t3434-rebase-i18n.sh @@ -0,0 +1,84 @@ +#!/bin/sh +# +# Copyright (c) 2019 Doan Tran Cong Danh +# + +test_description='rebase with changing encoding + +Initial setup: + +1 - 2 master + \ + 3 - 4 first + \ + 5 - 6 second +' + +. ./test-lib.sh + +compare_msg () { + iconv -f "$2" -t "$3" "$TEST_DIRECTORY/t3434/$1" >expect && + git cat-file commit HEAD >raw && + sed "1,/^$/d" raw >actual && + test_cmp expect actual +} + +test_expect_success setup ' + test_commit one && + git branch first && + test_commit two && + git switch first && + test_commit three && + git branch second && + test_commit four && + git switch second && + test_commit five && + test_commit six +' + +test_expect_success 'rebase --rebase-merges update encoding eucJP to UTF-8' ' + git switch -c merge-eucJP-UTF-8 first && + git config i18n.commitencoding eucJP && + git merge -F "$TEST_DIRECTORY/t3434/eucJP.txt" second && + git config i18n.commitencoding UTF-8 && + git rebase --rebase-merges master && + compare_msg eucJP.txt eucJP UTF-8 +' + +test_expect_success 'rebase --rebase-merges update encoding eucJP to ISO-2022-JP' ' + git switch -c merge-eucJP-ISO-2022-JP first && + git config i18n.commitencoding eucJP && + git merge -F "$TEST_DIRECTORY/t3434/eucJP.txt" second && + git config i18n.commitencoding ISO-2022-JP && + git rebase --rebase-merges master && + compare_msg eucJP.txt eucJP ISO-2022-JP +' + +test_rebase_continue_update_encode () { + old=$1 + new=$2 + msgfile=$3 + test_expect_success "rebase --continue update from $old to $new" ' + (git rebase --abort || : abort current git-rebase failure) && + git switch -c conflict-$old-$new one && + echo for-conflict >two.t && + git add two.t && + git config i18n.commitencoding $old && + git commit -F "$TEST_DIRECTORY/t3434/$msgfile" && + git config i18n.commitencoding $new && + test_must_fail git rebase -m master && + test -f .git/rebase-merge/message && + git stripspace <.git/rebase-merge/message >two.t && + git add two.t && + git rebase --continue && + compare_msg $msgfile $old $new && + : git-commit assume invalid utf-8 is latin1 && + test_cmp expect two.t + ' +} + +test_rebase_continue_update_encode ISO-8859-1 UTF-8 ISO8859-1.txt +test_rebase_continue_update_encode eucJP UTF-8 eucJP.txt +test_rebase_continue_update_encode eucJP ISO-2022-JP eucJP.txt + +test_done diff --git a/t/t3434/ISO8859-1.txt b/t/t3434/ISO8859-1.txt new file mode 100644 index 0000000000..7cbef0ee6f --- /dev/null +++ b/t/t3434/ISO8859-1.txt @@ -0,0 +1,3 @@ +ÄËÑÏÖ + +Ábçdèfg diff --git a/t/t3434/eucJP.txt b/t/t3434/eucJP.txt new file mode 100644 index 0000000000..546f2aac01 --- /dev/null +++ b/t/t3434/eucJP.txt @@ -0,0 +1,4 @@ +¤Ï¤ì¤Ò¤Û¤Õ + +¤·¤Æ¤¤¤ë¤Î¤¬¡¢¤¤¤ë¤Î¤Ç¡£ +ßÀÉͤۤì¤×¤ê¤Ý¤ì¤Þ¤Ó¤°¤ê¤í¤Ø¡£ diff --git a/t/t3435-rebase-gpg-sign.sh b/t/t3435-rebase-gpg-sign.sh new file mode 100755 index 0000000000..b47c59c190 --- /dev/null +++ b/t/t3435-rebase-gpg-sign.sh @@ -0,0 +1,71 @@ +#!/bin/sh +# +# Copyright (c) 2020 Doan Tran Cong Danh +# + +test_description='test rebase --[no-]gpg-sign' + +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-rebase.sh" +. "$TEST_DIRECTORY/lib-gpg.sh" + +if ! test_have_prereq GPG +then + skip_all='skip all test rebase --[no-]gpg-sign, gpg not available' + test_done +fi + +test_rebase_gpg_sign () { + local must_fail= will=will fake_editor= + if test "x$1" = "x!" + then + must_fail=test_must_fail + will="won't" + shift + fi + conf=$1 + shift + test_expect_success "rebase $* with commit.gpgsign=$conf $will sign commit" " + git reset two && + git config commit.gpgsign $conf && + set_fake_editor && + FAKE_LINES='r 1 p 2' git rebase --force-rebase --root $* && + $must_fail git verify-commit HEAD^ && + $must_fail git verify-commit HEAD + " +} + +test_expect_success 'setup' ' + test_commit one && + test_commit two && + test_must_fail git verify-commit HEAD && + test_must_fail git verify-commit HEAD^ +' + +test_expect_success 'setup: merge commit' ' + test_commit fork-point && + git switch -c side && + test_commit three && + git switch master && + git merge --no-ff side && + git tag merged +' + +test_rebase_gpg_sign ! false +test_rebase_gpg_sign true +test_rebase_gpg_sign ! true --no-gpg-sign +test_rebase_gpg_sign ! true --gpg-sign --no-gpg-sign +test_rebase_gpg_sign false --no-gpg-sign --gpg-sign +test_rebase_gpg_sign true -i +test_rebase_gpg_sign ! true -i --no-gpg-sign +test_rebase_gpg_sign ! true -i --gpg-sign --no-gpg-sign +test_rebase_gpg_sign false -i --no-gpg-sign --gpg-sign + +test_expect_failure 'rebase -p --no-gpg-sign override commit.gpgsign' ' + git reset --hard merged && + git config commit.gpgsign true && + git rebase -p --no-gpg-sign --onto=one fork-point master && + test_must_fail git verify-commit HEAD +' + +test_done diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index d1c68af8c5..7c1da21df1 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -106,7 +106,7 @@ test_expect_success 'cherry-pick on unborn branch' ' rm -rf * && git cherry-pick initial && git diff --quiet initial && - ! test_cmp_rev initial HEAD + test_cmp_rev ! initial HEAD ' test_expect_success 'cherry-pick "-" to pick from previous branch' ' @@ -150,7 +150,7 @@ test_expect_success 'cherry-pick works with dirty renamed file' ' test_tick && git commit -m renamed && echo modified >renamed && - git cherry-pick refs/heads/unrelated >out && + git cherry-pick refs/heads/unrelated && test $(git rev-parse :0:renamed) = $(git rev-parse HEAD~2:to-rename.t) && grep -q "^modified$" renamed ' diff --git a/t/t3504-cherry-pick-rerere.sh b/t/t3504-cherry-pick-rerere.sh index a267b2d144..80a0d08706 100755 --- a/t/t3504-cherry-pick-rerere.sh +++ b/t/t3504-cherry-pick-rerere.sh @@ -94,8 +94,10 @@ test_expect_success 'cherry-pick --rerere-autoupdate more than once' ' test_expect_success 'cherry-pick conflict without rerere' ' test_config rerere.enabled false && - test_must_fail git cherry-pick master && - test_must_fail test_cmp expect foo + test_must_fail git cherry-pick foo-master && + grep ===== foo && + grep foo-dev foo && + grep foo-master foo ' test_done diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh index 9b9b4ca8d4..752bc43487 100755 --- a/t/t3507-cherry-pick-conflict.sh +++ b/t/t3507-cherry-pick-conflict.sh @@ -161,6 +161,29 @@ test_expect_success 'successful commit clears CHERRY_PICK_HEAD' ' test_must_fail git rev-parse --verify CHERRY_PICK_HEAD ' + +test_expect_success 'partial commit of cherry-pick fails' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + echo resolved >foo && + git add foo && + test_must_fail git commit foo 2>err && + + test_i18ngrep "cannot do a partial commit during a cherry-pick." err +' + +test_expect_success 'commit --amend of cherry-pick fails' ' + pristine_detach initial && + + test_must_fail git cherry-pick picked && + echo resolved >foo && + git add foo && + test_must_fail git commit --amend 2>err && + + test_i18ngrep "in the middle of a cherry-pick -- cannot amend." err +' + test_expect_success 'successful final commit clears cherry-pick state' ' pristine_detach initial && @@ -168,7 +191,7 @@ test_expect_success 'successful final commit clears cherry-pick state' ' echo resolved >foo && test_path_is_file .git/sequencer/todo && git commit -a && - test_must_fail test_path_exists .git/sequencer + test_path_is_missing .git/sequencer ' test_expect_success 'reset after final pick clears cherry-pick state' ' @@ -178,7 +201,7 @@ test_expect_success 'reset after final pick clears cherry-pick state' ' echo resolved >foo && test_path_is_file .git/sequencer/todo && git reset && - test_must_fail test_path_exists .git/sequencer + test_path_is_missing .git/sequencer ' test_expect_success 'failed cherry-pick produces dirty index' ' @@ -381,23 +404,23 @@ test_expect_success 'failed commit does not clear REVERT_HEAD' ' ' test_expect_success 'successful final commit clears revert state' ' - pristine_detach picked-signed && + pristine_detach picked-signed && - test_must_fail git revert picked-signed base && - echo resolved >foo && - test_path_is_file .git/sequencer/todo && - git commit -a && - test_must_fail test_path_exists .git/sequencer + test_must_fail git revert picked-signed base && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git commit -a && + test_path_is_missing .git/sequencer ' test_expect_success 'reset after final pick clears revert state' ' - pristine_detach picked-signed && + pristine_detach picked-signed && - test_must_fail git revert picked-signed base && - echo resolved >foo && - test_path_is_file .git/sequencer/todo && - git reset && - test_must_fail test_path_exists .git/sequencer + test_must_fail git revert picked-signed base && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git reset && + test_path_is_missing .git/sequencer ' test_expect_success 'revert conflict, diff3 -m style' ' diff --git a/t/t3508-cherry-pick-many-commits.sh b/t/t3508-cherry-pick-many-commits.sh index b457333e18..23070a7b73 100755 --- a/t/t3508-cherry-pick-many-commits.sh +++ b/t/t3508-cherry-pick-many-commits.sh @@ -5,7 +5,7 @@ test_description='test cherry-picking many commits' . ./test-lib.sh check_head_differs_from() { - ! test_cmp_rev HEAD "$1" + test_cmp_rev ! HEAD "$1" } check_head_equals() { diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index 793bcc7fe3..5b94fdaa67 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -123,7 +123,8 @@ test_expect_success 'revert --skip to skip commit' ' test_expect_success 'skip "empty" commit' ' pristine_detach picked && test_commit dummy foo d && - test_must_fail git cherry-pick anotherpick && + test_must_fail git cherry-pick anotherpick 2>err && + test_i18ngrep "git cherry-pick --skip" err && git cherry-pick --skip && test_cmp_rev dummy HEAD ' diff --git a/t/t3514-cherry-pick-revert-gpg.sh b/t/t3514-cherry-pick-revert-gpg.sh new file mode 100755 index 0000000000..5b2e250eaa --- /dev/null +++ b/t/t3514-cherry-pick-revert-gpg.sh @@ -0,0 +1,86 @@ +#!/bin/sh +# +# Copyright (c) 2020 Doan Tran Cong Danh +# + +test_description='test {cherry-pick,revert} --[no-]gpg-sign' + +. ./test-lib.sh +. "$TEST_DIRECTORY/lib-gpg.sh" + +if ! test_have_prereq GPG +then + skip_all='skip all test {cherry-pick,revert} --[no-]gpg-sign, gpg not available' + test_done +fi + +test_gpg_sign () { + local must_fail= will=will fake_editor= + if test "x$1" = "x!" + then + must_fail=test_must_fail + will="won't" + shift + fi + conf=$1 + cmd=$2 + cmit=$3 + shift 3 + test_expect_success "$cmd $* $cmit with commit.gpgsign=$conf $will sign commit" " + git reset --hard tip && + git config commit.gpgsign $conf && + git $cmd $* $cmit && + git rev-list tip.. >rev-list && + $must_fail git verify-commit \$(cat rev-list) + " +} + +test_expect_success 'setup' ' + test_commit one && + git switch -c side && + test_commit side1 && + test_commit side2 && + git switch - && + test_commit two && + test_commit three && + test_commit tip +' + +test_gpg_sign ! false cherry-pick side +test_gpg_sign ! false cherry-pick ..side +test_gpg_sign true cherry-pick side +test_gpg_sign true cherry-pick ..side +test_gpg_sign ! true cherry-pick side --no-gpg-sign +test_gpg_sign ! true cherry-pick ..side --no-gpg-sign +test_gpg_sign ! true cherry-pick side --gpg-sign --no-gpg-sign +test_gpg_sign ! true cherry-pick ..side --gpg-sign --no-gpg-sign +test_gpg_sign false cherry-pick side --no-gpg-sign --gpg-sign +test_gpg_sign false cherry-pick ..side --no-gpg-sign --gpg-sign +test_gpg_sign true cherry-pick side --edit +test_gpg_sign true cherry-pick ..side --edit +test_gpg_sign ! true cherry-pick side --edit --no-gpg-sign +test_gpg_sign ! true cherry-pick ..side --edit --no-gpg-sign +test_gpg_sign ! true cherry-pick side --edit --gpg-sign --no-gpg-sign +test_gpg_sign ! true cherry-pick ..side --edit --gpg-sign --no-gpg-sign +test_gpg_sign false cherry-pick side --edit --no-gpg-sign --gpg-sign +test_gpg_sign false cherry-pick ..side --edit --no-gpg-sign --gpg-sign + +test_gpg_sign ! false revert HEAD --edit +test_gpg_sign ! false revert two.. --edit +test_gpg_sign true revert HEAD --edit +test_gpg_sign true revert two.. --edit +test_gpg_sign ! true revert HEAD --edit --no-gpg-sign +test_gpg_sign ! true revert two.. --edit --no-gpg-sign +test_gpg_sign ! true revert HEAD --edit --gpg-sign --no-gpg-sign +test_gpg_sign ! true revert two.. --edit --gpg-sign --no-gpg-sign +test_gpg_sign false revert HEAD --edit --no-gpg-sign --gpg-sign +test_gpg_sign false revert two.. --edit --no-gpg-sign --gpg-sign +test_gpg_sign true revert HEAD --no-edit +test_gpg_sign true revert two.. --no-edit +test_gpg_sign ! true revert HEAD --no-edit --no-gpg-sign +test_gpg_sign ! true revert two.. --no-edit --no-gpg-sign +test_gpg_sign ! true revert HEAD --no-edit --gpg-sign --no-gpg-sign +test_gpg_sign ! true revert two.. --no-edit --gpg-sign --no-gpg-sign +test_gpg_sign false revert HEAD --no-edit --no-gpg-sign --gpg-sign + +test_done diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index 8c8cca5bfb..f2c0168941 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -113,9 +113,10 @@ test_expect_success '"rm" command printed' ' echo frotz >test-file && git add test-file && git commit -m "add file for rm test" && - git rm test-file >rm-output && - test $(grep "^rm " rm-output | wc -l) = 1 && - rm -f test-file rm-output && + git rm test-file >rm-output.raw && + grep "^rm " rm-output.raw >rm-output && + test_line_count = 1 rm-output && + rm -f test-file rm-output.raw rm-output && git commit -m "remove file from rm test" ' @@ -250,6 +251,7 @@ test_expect_success 'choking "git rm" should not let it die with cruft' ' echo "100644 $hash 0 some-file-$i" i=$(( $i + 1 )) done | git update-index --index-info && + # git command is intentionally placed upstream of pipe to induce SIGPIPE git rm -n "some-file-*" | : && test_path_is_missing .git/index.lock ' @@ -303,7 +305,8 @@ EOF test_expect_success 'rm removes empty submodules from work tree' ' mkdir submod && - git update-index --add --cacheinfo 160000 $(git rev-parse HEAD) submod && + hash=$(git rev-parse HEAD) && + git update-index --add --cacheinfo 160000 "$hash" submod && git config -f .gitmodules submodule.sub.url ./. && git config -f .gitmodules submodule.sub.path submod && git submodule init && @@ -422,6 +425,13 @@ test_expect_success 'rm will error out on a modified .gitmodules file unless sta git status -s -uno >actual && test_cmp expect actual ' +test_expect_success 'rm will not error out on .gitmodules file with zero stat data' ' + git reset --hard && + git submodule update && + git read-tree HEAD && + git rm submod && + test_path_is_missing submod +' test_expect_success 'rm issues a warning when section is not found in .gitmodules' ' git reset --hard && @@ -622,7 +632,8 @@ test_expect_success 'setup subsubmodule' ' git submodule update && ( cd submod && - git update-index --add --cacheinfo 160000 $(git rev-parse HEAD) subsubmod && + hash=$(git rev-parse HEAD) && + git update-index --add --cacheinfo 160000 "$hash" subsubmod && git config -f .gitmodules submodule.sub.url ../. && git config -f .gitmodules submodule.sub.path subsubmod && git submodule init && diff --git a/t/t3601-rm-pathspec-file.sh b/t/t3601-rm-pathspec-file.sh new file mode 100755 index 0000000000..7de21f8bcf --- /dev/null +++ b/t/t3601-rm-pathspec-file.sh @@ -0,0 +1,79 @@ +#!/bin/sh + +test_description='rm --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files" && + + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git status --porcelain --untracked-files=no -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success 'simplest' ' + restore_checkpoint && + + cat >expect <<-\EOF && + D fileA.t + EOF + + echo fileA.t | git rm --pathspec-from-file=- && + verify_expect +' + +test_expect_success '--pathspec-file-nul' ' + restore_checkpoint && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + + printf "fileA.t\0fileB.t\0" | git rm --pathspec-from-file=- --pathspec-file-nul && + verify_expect +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + cat >expect <<-\EOF && + D fileB.t + D fileC.t + EOF + + printf "fileB.t\nfileC.t\n" | git rm --pathspec-from-file=- && + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + + test_must_fail git rm --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git rm --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + >empty_list && + test_must_fail git rm --pathspec-from-file=empty_list 2>err && + test_i18ngrep -e "No pathspec was given. Which files should I remove?" err +' + +test_done diff --git a/t/t3700-add.sh b/t/t3700-add.sh index c325167b90..b7d4ba608c 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -192,7 +192,7 @@ test_expect_success 'git add --refresh with pathspec' ' test_must_be_empty actual && git diff-files --name-only >actual && - ! grep bar actual&& + ! grep bar actual && grep baz actual ' @@ -326,7 +326,9 @@ test_expect_success 'git add --dry-run of an existing file output' " cat >expect.err <<\EOF The following paths are ignored by one of your .gitignore files: ignored-file -Use -f if you really want to add them. +hint: Use -f if you really want to add them. +hint: Turn this message off by running +hint: "git config advice.addIgnoredFile false" EOF cat >expect.out <<\EOF add 'track-this' diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index 7bc0c3fe6e..49decbac71 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -68,6 +68,15 @@ test_expect_success 'revert works (initial)' ' ! grep . output ' +test_expect_success 'add untracked (multiple)' ' + test_when_finished "git reset && rm [1-9]" && + touch $(test_seq 9) && + test_write_lines a "2-5 8-" | git add -i -- [1-9] && + test_write_lines 2 3 4 5 8 9 >expected && + git ls-files [1-9] >output && + test_cmp expected output +' + test_expect_success 'setup (commit)' ' echo baseline >file && git add file && @@ -563,6 +572,19 @@ test_expect_success 'diffs can be colorized' ' grep "$(printf "\\033")" output ' +test_expect_success 'colorized diffs respect diff.wsErrorHighlight' ' + git reset --hard && + + echo "old " >test && + git add test && + echo "new " >test && + + printf y >y && + force_color git -c diff.wsErrorHighlight=all add -p >output.raw 2>&1 <y && + test_decode_color <output.raw >output && + grep "old<" output +' + test_expect_success 'diffFilter filters diff' ' git reset --hard && @@ -777,7 +799,7 @@ test_expect_success 'add -p patch editing works with pathological context lines' test_expect_success 'checkout -p works with pathological context lines' ' test_write_lines a a a a a a >a && git add a && - test_write_lines a b a b a b a b a b a > a&& + test_write_lines a b a b a b a b a b a >a && test_write_lines s n n y q | git checkout -p && test_write_lines a b a b a a b a b a >expect && test_cmp expect a diff --git a/t/t3704-add-pathspec-file.sh b/t/t3704-add-pathspec-file.sh new file mode 100755 index 0000000000..9e35c1fbca --- /dev/null +++ b/t/t3704-add-pathspec-file.sh @@ -0,0 +1,159 @@ +#!/bin/sh + +test_description='add --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + test_commit file0 && + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t +' + +restore_checkpoint () { + git reset +} + +verify_expect () { + git status --porcelain --untracked-files=no -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + echo fileA.t | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + echo fileA.t >list && + git add --pathspec-from-file=list && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + printf "fileA.t\0fileB.t\0" | git add --pathspec-from-file=- --pathspec-file-nul && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t\n" | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t" | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + printf "fileA.t\r\nfileB.t\r\n" | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git add --pathspec-from-file=list && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + test_must_fail git add --pathspec-from-file=list --pathspec-file-nul +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + printf "fileB.t\nfileC.t\n" | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileB.t + A fileC.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + >empty_list && + + test_must_fail git add --pathspec-from-file=list --interactive 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --interactive/--patch" err && + + test_must_fail git add --pathspec-from-file=list --patch 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --interactive/--patch" err && + + test_must_fail git add --pathspec-from-file=list --edit 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --edit" err && + + test_must_fail git add --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git add --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + # This case succeeds, but still prints to stderr + git add --pathspec-from-file=empty_list 2>err && + test_i18ngrep -e "Nothing specified, nothing added." err +' + +test_done diff --git a/t/t3900-i18n-commit.sh b/t/t3900-i18n-commit.sh index b92ff95977..d277a9f4b7 100755 --- a/t/t3900-i18n-commit.sh +++ b/t/t3900-i18n-commit.sh @@ -204,4 +204,41 @@ test_commit_autosquash_flags eucJP fixup test_commit_autosquash_flags ISO-2022-JP squash +test_commit_autosquash_multi_encoding () { + flag=$1 + old=$2 + new=$3 + msg=$4 + test_expect_success "commit --$flag into $old from $new" ' + git checkout -b $flag-$old-$new C0 && + git config i18n.commitencoding $old && + echo $old >>F && + git commit -a -F "$TEST_DIRECTORY"/t3900/$msg && + test_tick && + echo intermediate stuff >>G && + git add G && + git commit -a -m "intermediate commit" && + test_tick && + git config i18n.commitencoding $new && + echo $new-$flag >>F && + git commit -a --$flag HEAD^ && + git rebase --autosquash -i HEAD^^^ && + git rev-list HEAD >actual && + test_line_count = 3 actual && + iconv -f $old -t UTF-8 "$TEST_DIRECTORY"/t3900/$msg >expect && + if test $flag = squash; then + subject="$(head -1 expect)" && + printf "\nsquash! %s\n" "$subject" >>expect + fi && + git cat-file commit HEAD^ >raw && + (sed "1,/^$/d" raw | iconv -f $new -t utf-8) >actual && + test_cmp expect actual + ' +} + +test_commit_autosquash_multi_encoding fixup UTF-8 ISO-8859-1 1-UTF-8.txt +test_commit_autosquash_multi_encoding squash ISO-8859-1 UTF-8 ISO8859-1.txt +test_commit_autosquash_multi_encoding squash eucJP ISO-2022-JP eucJP.txt +test_commit_autosquash_multi_encoding fixup ISO-2022-JP UTF-8 ISO-2022-JP.txt + test_done diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 580bfbdc23..9f7ca98967 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -244,8 +244,11 @@ test_expect_success 'save -q is quiet' ' test_must_be_empty output.out ' -test_expect_success 'pop -q is quiet' ' +test_expect_success 'pop -q works and is quiet' ' git stash pop -q >output.out 2>&1 && + echo bar >expect && + git show :file >actual && + test_cmp expect actual && test_must_be_empty output.out ' @@ -254,6 +257,8 @@ test_expect_success 'pop -q --index works and is quiet' ' git add file && git stash save --quiet && git stash pop -q --index >output.out 2>&1 && + git diff-files file2 >file2.diff && + test_must_be_empty file2.diff && test foo = "$(git show :file)" && test_must_be_empty output.out ' @@ -280,6 +285,11 @@ test_expect_success 'stash --no-keep-index' ' test bar,bar2 = $(cat file),$(cat file2) ' +test_expect_success 'dont assume push with non-option args' ' + test_must_fail git stash -q drop 2>err && + test_i18ngrep -e "subcommand wasn'\''t specified; '\''push'\'' can'\''t be assumed due to unexpected token '\''drop'\''" err +' + test_expect_success 'stash --invalid-option' ' echo bar5 >file && echo bar6 >file2 && @@ -1269,4 +1279,29 @@ test_expect_success 'stash apply should succeed with unmodified file' ' git stash apply ' +test_expect_success 'stash handles skip-worktree entries nicely' ' + test_commit A && + echo changed >A.t && + git add A.t && + git update-index --skip-worktree A.t && + rm A.t && + git stash && + + git rev-parse --verify refs/stash:A.t +' + +test_expect_success 'stash -c stash.useBuiltin=false warning ' ' + expected="stash.useBuiltin support has been removed" && + + git -c stash.useBuiltin=false stash 2>err && + test_i18ngrep "$expected" err && + env GIT_TEST_STASH_USE_BUILTIN=false git stash 2>err && + test_i18ngrep "$expected" err && + + git -c stash.useBuiltin=true stash 2>err && + test_must_be_empty err && + env GIT_TEST_STASH_USE_BUILTIN=true git stash 2>err && + test_must_be_empty err +' + test_done diff --git a/t/t3904-stash-patch.sh b/t/t3904-stash-patch.sh index 9546b6f8a4..accfe3845c 100755 --- a/t/t3904-stash-patch.sh +++ b/t/t3904-stash-patch.sh @@ -89,7 +89,7 @@ test_expect_success 'none of this moved HEAD' ' verify_saved_head ' -test_expect_failure 'stash -p with split hunk' ' +test_expect_success 'stash -p with split hunk' ' git reset --hard && cat >test <<-\EOF && aaa @@ -106,8 +106,8 @@ test_expect_failure 'stash -p with split hunk' ' ccc EOF printf "%s\n" s n y q | - test_might_fail git stash -p 2>error && - ! test_must_be_empty error && + git stash -p 2>error && + test_must_be_empty error && grep "added line 1" test && ! grep "added line 2" test ' diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index 29ca76f2fb..f075c7f1f3 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -277,8 +277,8 @@ test_expect_success 'stash -u -- <ignored> leaves ignored file alone' ' test_path_is_file ignored.d/bar ' -test_expect_success 'stash -u -- <non-existant> shows no changes when there are none' ' - git stash push -u -- non-existant >actual && +test_expect_success 'stash -u -- <non-existent> shows no changes when there are none' ' + git stash push -u -- non-existent >actual && echo "No local changes to save" >expect && test_i18ncmp expect actual ' diff --git a/t/t3909-stash-pathspec-file.sh b/t/t3909-stash-pathspec-file.sh new file mode 100755 index 0000000000..55e050cfd4 --- /dev/null +++ b/t/t3909-stash-pathspec-file.sh @@ -0,0 +1,100 @@ +#!/bin/sh + +test_description='stash --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + >fileA.t && + >fileB.t && + >fileC.t && + >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "Files" && + + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git stash show --name-status >actual && + test_cmp expect actual +} + +test_expect_success 'simplest' ' + restore_checkpoint && + + # More files are written to make sure that git didnt ignore + # --pathspec-from-file, stashing everything + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + + cat >expect <<-\EOF && + M fileA.t + EOF + + echo fileA.t | git stash push --pathspec-from-file=- && + verify_expect +' + +test_expect_success '--pathspec-file-nul' ' + restore_checkpoint && + + # More files are written to make sure that git didnt ignore + # --pathspec-from-file, stashing everything + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + + printf "fileA.t\0fileB.t\0" | git stash push --pathspec-from-file=- --pathspec-file-nul && + verify_expect +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + # More files are written to make sure that git didnt ignore + # --pathspec-from-file, stashing everything + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + + cat >expect <<-\EOF && + M fileB.t + M fileC.t + EOF + + printf "fileB.t\nfileC.t\n" | git stash push --pathspec-from-file=- && + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo A >fileA.t && + echo fileA.t >list && + + test_must_fail git stash push --pathspec-from-file=list --patch 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --patch" err && + + test_must_fail git stash push --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git stash push --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err +' + +test_done diff --git a/t/t4010-diff-pathspec.sh b/t/t4010-diff-pathspec.sh index 281f8fad0c..e5ca359edf 100755 --- a/t/t4010-diff-pathspec.sh +++ b/t/t4010-diff-pathspec.sh @@ -17,11 +17,15 @@ test_expect_success \ 'echo frotz >file0 && mkdir path1 && echo rezrov >path1/file1 && + before0=$(git hash-object file0) && + before1=$(git hash-object path1/file1) && git update-index --add file0 path1/file1 && tree=$(git write-tree) && echo "$tree" && echo nitfol >file0 && echo yomin >path1/file1 && + after0=$(git hash-object file0) && + after1=$(git hash-object path1/file1) && git update-index file0 path1/file1' cat >expected <<\EOF @@ -31,32 +35,32 @@ test_expect_success \ 'git diff-index --cached $tree -- path >current && compare_diff_raw current expected' -cat >expected <<\EOF -:100644 100644 766498d93a4b06057a8e49d23f4068f1170ff38f 0a41e115ab61be0328a19b29f18cdcb49338d516 M path1/file1 +cat >expected <<EOF +:100644 100644 $before1 $after1 M path1/file1 EOF test_expect_success \ 'limit to path1 should show path1/file1' \ 'git diff-index --cached $tree -- path1 >current && compare_diff_raw current expected' -cat >expected <<\EOF -:100644 100644 766498d93a4b06057a8e49d23f4068f1170ff38f 0a41e115ab61be0328a19b29f18cdcb49338d516 M path1/file1 +cat >expected <<EOF +:100644 100644 $before1 $after1 M path1/file1 EOF test_expect_success \ 'limit to path1/ should show path1/file1' \ 'git diff-index --cached $tree -- path1/ >current && compare_diff_raw current expected' -cat >expected <<\EOF -:100644 100644 766498d93a4b06057a8e49d23f4068f1170ff38f 0a41e115ab61be0328a19b29f18cdcb49338d516 M path1/file1 +cat >expected <<EOF +:100644 100644 $before1 $after1 M path1/file1 EOF test_expect_success \ '"*file1" should show path1/file1' \ 'git diff-index --cached $tree -- "*file1" >current && compare_diff_raw current expected' -cat >expected <<\EOF -:100644 100644 8e4020bb5a8d8c873b25de15933e75cc0fc275df dca6b92303befc93086aa025d90a5facd7eb2812 M file0 +cat >expected <<EOF +:100644 100644 $before0 $after0 M file0 EOF test_expect_success \ 'limit to file0 should show file0' \ diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index 5ae19b987d..717034bb50 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -9,11 +9,24 @@ test_description='Test diff of symlinks. . ./test-lib.sh . "$TEST_DIRECTORY"/diff-lib.sh +# Print the short OID of a symlink with the given name. +symlink_oid () { + local oid=$(printf "%s" "$1" | git hash-object --stdin) && + git rev-parse --short "$oid" +} + +# Print the short OID of the given file. +short_oid () { + local oid=$(git hash-object "$1") && + git rev-parse --short "$oid" +} + test_expect_success 'diff new symlink and file' ' - cat >expected <<-\EOF && + symlink=$(symlink_oid xyzzy) && + cat >expected <<-EOF && diff --git a/frotz b/frotz new file mode 120000 - index 0000000..7c465af + index 0000000..$symlink --- /dev/null +++ b/frotz @@ -0,0 +1 @@ @@ -21,7 +34,7 @@ test_expect_success 'diff new symlink and file' ' \ No newline at end of file diff --git a/nitfol b/nitfol new file mode 100644 - index 0000000..7c465af + index 0000000..$symlink --- /dev/null +++ b/nitfol @@ -0,0 +1 @@ @@ -46,10 +59,10 @@ test_expect_success 'diff unchanged symlink and file' ' ' test_expect_success 'diff removed symlink and file' ' - cat >expected <<-\EOF && + cat >expected <<-EOF && diff --git a/frotz b/frotz deleted file mode 120000 - index 7c465af..0000000 + index $symlink..0000000 --- a/frotz +++ /dev/null @@ -1 +0,0 @@ @@ -57,7 +70,7 @@ test_expect_success 'diff removed symlink and file' ' \ No newline at end of file diff --git a/nitfol b/nitfol deleted file mode 100644 - index 7c465af..0000000 + index $symlink..0000000 --- a/nitfol +++ /dev/null @@ -1 +0,0 @@ @@ -90,9 +103,10 @@ test_expect_success 'diff identical, but newly created symlink and file' ' ' test_expect_success 'diff different symlink and file' ' - cat >expected <<-\EOF && + new=$(symlink_oid yxyyz) && + cat >expected <<-EOF && diff --git a/frotz b/frotz - index 7c465af..df1db54 120000 + index $symlink..$new 120000 --- a/frotz +++ b/frotz @@ -1 +1 @@ @@ -101,7 +115,7 @@ test_expect_success 'diff different symlink and file' ' +yxyyz \ No newline at end of file diff --git a/nitfol b/nitfol - index 7c465af..df1db54 100644 + index $symlink..$new 100644 --- a/nitfol +++ b/nitfol @@ -1 +1 @@ @@ -137,14 +151,16 @@ test_expect_success SYMLINKS 'setup symlinks with attributes' ' ' test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' ' - cat >expect <<-\EOF && + file=$(short_oid file.bin) && + link=$(symlink_oid file.bin) && + cat >expect <<-EOF && diff --git a/file.bin b/file.bin new file mode 100644 - index 0000000..d95f3ad + index 0000000..$file Binary files /dev/null and b/file.bin differ diff --git a/link.bin b/link.bin new file mode 120000 - index 0000000..dce41ec + index 0000000..$link --- /dev/null +++ b/link.bin @@ -0,0 +1 @@ diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 5ac94b390d..3f60f7d96c 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -95,6 +95,15 @@ test_expect_success setup ' git commit -m "update mode" && git checkout -f master && + GIT_AUTHOR_DATE="2006-06-26 00:06:00 +0000" && + GIT_COMMITTER_DATE="2006-06-26 00:06:00 +0000" && + export GIT_AUTHOR_DATE GIT_COMMITTER_DATE && + git checkout -b note initial && + git update-index --chmod=+x file2 && + git commit -m "update mode (file2)" && + git notes add -m "note" && + git checkout -f master && + # Same merge as master, but with parents reversed. Hide it in a # pseudo-ref to avoid impacting tests with --all. commit=$(echo reverse | @@ -120,6 +129,30 @@ test_expect_success setup ' +*++ [initial] Initial EOF +process_diffs () { + _x04="[0-9a-f][0-9a-f][0-9a-f][0-9a-f]" && + _x07="$_x05[0-9a-f][0-9a-f]" && + sed -e "s/$OID_REGEX/$ZERO_OID/g" \ + -e "s/From $_x40 /From $ZERO_OID /" \ + -e "s/from $_x40)/from $ZERO_OID)/" \ + -e "s/commit $_x40\$/commit $ZERO_OID/" \ + -e "s/commit $_x40 (/commit $ZERO_OID (/" \ + -e "s/$_x40 $_x40 $_x40/$ZERO_OID $ZERO_OID $ZERO_OID/" \ + -e "s/$_x40 $_x40 /$ZERO_OID $ZERO_OID /" \ + -e "s/^$_x40 $_x40$/$ZERO_OID $ZERO_OID/" \ + -e "s/^$_x40 /$ZERO_OID /" \ + -e "s/^$_x40$/$ZERO_OID/" \ + -e "s/$_x07\.\.$_x07/fffffff..fffffff/g" \ + -e "s/$_x07,$_x07\.\.$_x07/fffffff,fffffff..fffffff/g" \ + -e "s/$_x07 $_x07 $_x07/fffffff fffffff fffffff/g" \ + -e "s/$_x07 $_x07 /fffffff fffffff /g" \ + -e "s/Merge: $_x07 $_x07/Merge: fffffff fffffff/g" \ + -e "s/$_x07\.\.\./fffffff.../g" \ + -e "s/ $_x04\.\.\./ ffff.../g" \ + -e "s/ $_x04/ ffff/g" \ + "$1" +} + V=$(git version | sed -e 's/^git version //' -e 's/\./\\./g') while read magic cmd do @@ -158,13 +191,15 @@ do } >"$actual" && if test -f "$expect" then + process_diffs "$actual" >actual && + process_diffs "$expect" >expect && case $cmd in *format-patch* | *-stat*) - test_i18ncmp "$expect" "$actual";; + test_i18ncmp expect actual;; *) - test_cmp "$expect" "$actual";; + test_cmp expect actual;; esac && - rm -f "$actual" + rm -f "$actual" actual expect else # this is to help developing new tests. cp "$actual" "$expect" @@ -372,6 +407,9 @@ diff --no-index --raw --no-abbrev dir2 dir diff-tree --pretty --root --stat --compact-summary initial diff-tree --pretty -R --root --stat --compact-summary initial +diff-tree --pretty note +diff-tree --pretty --notes note +diff-tree --format=%N note diff-tree --stat --compact-summary initial mode diff-tree -R --stat --compact-summary initial mode EOF @@ -383,16 +421,22 @@ test_expect_success 'log -S requires an argument' ' test_expect_success 'diff --cached on unborn branch' ' echo ref: refs/heads/unborn >.git/HEAD && git diff --cached >result && - test_cmp "$TEST_DIRECTORY/t4013/diff.diff_--cached" result + process_diffs result >actual && + process_diffs "$TEST_DIRECTORY/t4013/diff.diff_--cached" >expected && + test_cmp expected actual ' test_expect_success 'diff --cached -- file on unborn branch' ' git diff --cached -- file0 >result && - test_cmp "$TEST_DIRECTORY/t4013/diff.diff_--cached_--_file0" result + process_diffs result >actual && + process_diffs "$TEST_DIRECTORY/t4013/diff.diff_--cached_--_file0" >expected && + test_cmp expected actual ' test_expect_success 'diff --line-prefix with spaces' ' git diff --line-prefix="| | | " --cached -- file0 >result && - test_cmp "$TEST_DIRECTORY/t4013/diff.diff_--line-prefix_--cached_--_file0" result + process_diffs result >actual && + process_diffs "$TEST_DIRECTORY/t4013/diff.diff_--line-prefix_--cached_--_file0" >expected && + test_cmp expected actual ' test_expect_success 'diff-tree --stdin with log formatting' ' diff --git a/t/t4013/diff.diff-tree_--format=%N_note b/t/t4013/diff.diff-tree_--format=%N_note new file mode 100644 index 0000000000..93042ed539 --- /dev/null +++ b/t/t4013/diff.diff-tree_--format=%N_note @@ -0,0 +1,6 @@ +$ git diff-tree --format=%N note +note + + +:100644 100755 01e79c32a8c99c557f0757da7cb6d65b3414466d 01e79c32a8c99c557f0757da7cb6d65b3414466d M file2 +$ diff --git a/t/t4013/diff.diff-tree_--pretty_--notes_note b/t/t4013/diff.diff-tree_--pretty_--notes_note new file mode 100644 index 0000000000..4d0bde601c --- /dev/null +++ b/t/t4013/diff.diff-tree_--pretty_--notes_note @@ -0,0 +1,12 @@ +$ git diff-tree --pretty --notes note +commit a6f364368ca320bc5a92e18912e16fa6b3dff598 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + update mode (file2) + +Notes: + note + +:100644 100755 01e79c32a8c99c557f0757da7cb6d65b3414466d 01e79c32a8c99c557f0757da7cb6d65b3414466d M file2 +$ diff --git a/t/t4013/diff.diff-tree_--pretty_note b/t/t4013/diff.diff-tree_--pretty_note new file mode 100644 index 0000000000..1fa5967083 --- /dev/null +++ b/t/t4013/diff.diff-tree_--pretty_note @@ -0,0 +1,9 @@ +$ git diff-tree --pretty note +commit a6f364368ca320bc5a92e18912e16fa6b3dff598 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + update mode (file2) + +:100644 100755 01e79c32a8c99c557f0757da7cb6d65b3414466d 01e79c32a8c99c557f0757da7cb6d65b3414466d M file2 +$ diff --git a/t/t4013/diff.log_--decorate=full_--all b/t/t4013/diff.log_--decorate=full_--all index 2afe91f116..3f9b872ece 100644 --- a/t/t4013/diff.log_--decorate=full_--all +++ b/t/t4013/diff.log_--decorate=full_--all @@ -5,12 +5,27 @@ Date: Mon Jun 26 00:06:00 2006 +0000 update mode +commit a6f364368ca320bc5a92e18912e16fa6b3dff598 (refs/heads/note) +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + update mode (file2) + +Notes: + note + commit cd4e72fd96faed3f0ba949dc42967430374e2290 (refs/heads/rearrange) Author: A U Thor <author@example.com> Date: Mon Jun 26 00:06:00 2006 +0000 Rearranged lines in dir/sub +commit cbacedd14cb8b89255a2c02b59e77a2e9a8021a0 (refs/notes/commits) +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + Notes added by 'git notes add' + commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (HEAD -> refs/heads/master) Merge: 9a6d494 c7a2ab9 Author: A U Thor <author@example.com> diff --git a/t/t4013/diff.log_--decorate_--all b/t/t4013/diff.log_--decorate_--all index d0f308ab2b..f5e20e1e14 100644 --- a/t/t4013/diff.log_--decorate_--all +++ b/t/t4013/diff.log_--decorate_--all @@ -5,12 +5,27 @@ Date: Mon Jun 26 00:06:00 2006 +0000 update mode +commit a6f364368ca320bc5a92e18912e16fa6b3dff598 (note) +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + update mode (file2) + +Notes: + note + commit cd4e72fd96faed3f0ba949dc42967430374e2290 (rearrange) Author: A U Thor <author@example.com> Date: Mon Jun 26 00:06:00 2006 +0000 Rearranged lines in dir/sub +commit cbacedd14cb8b89255a2c02b59e77a2e9a8021a0 (refs/notes/commits) +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:06:00 2006 +0000 + + Notes added by 'git notes add' + commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (HEAD -> master) Merge: 9a6d494 c7a2ab9 Author: A U Thor <author@example.com> diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index b8969998b5..575e079cc2 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -793,6 +793,38 @@ test_expect_success 'format-patch with multiple notes refs' ' ! grep "this is note 2" out ' +test_expect_success 'format-patch with multiple notes refs in config' ' + test_when_finished "test_unconfig format.notes" && + + git notes --ref note1 add -m "this is note 1" HEAD && + test_when_finished git notes --ref note1 remove HEAD && + git notes --ref note2 add -m "this is note 2" HEAD && + test_when_finished git notes --ref note2 remove HEAD && + + git config format.notes note1 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + ! grep "this is note 2" out && + git config format.notes note2 && + git format-patch -1 --stdout >out && + ! grep "this is note 1" out && + grep "this is note 2" out && + git config --add format.notes note1 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + grep "this is note 2" out && + + git config --replace-all format.notes note1 && + git config --add format.notes false && + git format-patch -1 --stdout >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out && + git config --add format.notes note2 && + git format-patch -1 --stdout >out && + ! grep "this is note 1" out && + grep "this is note 2" out +' + echo "fatal: --name-only does not make sense" >expect.name-only echo "fatal: --name-status does not make sense" >expect.name-status echo "fatal: --check does not make sense" >expect.check @@ -1129,6 +1161,59 @@ test_expect_success 'format-patch wraps extremely long from-header (rfc2047)' ' ' cat >expect <<'EOF' +From: Foö Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar + Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo + Bar Foo Bar Foo Bar Foo Bar <author@example.com> +EOF +test_expect_success 'format-patch wraps extremely long from-header (non-ASCII without Q-encoding)' ' + echo content >>file && + git add file && + GIT_AUTHOR_NAME="Foö Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar Foo Bar" \ + git commit -m author-check && + git format-patch --no-encode-email-headers --stdout -1 >patch && + sed -n "/^From: /p; /^ /p; /^$/q" patch >actual && + test_cmp expect actual +' + +cat >expect <<'EOF' +Subject: [PATCH] Foö +EOF +test_expect_success 'subject lines are unencoded with --no-encode-email-headers' ' + echo content >>file && + git add file && + git commit -m "Foö" && + git format-patch --no-encode-email-headers -1 --stdout >patch && + grep ^Subject: patch >actual && + test_cmp expect actual +' + +cat >expect <<'EOF' +Subject: [PATCH] Foö +EOF +test_expect_success 'subject lines are unencoded with format.encodeEmailHeaders=false' ' + echo content >>file && + git add file && + git commit -m "Foö" && + git config format.encodeEmailHeaders false && + git format-patch -1 --stdout >patch && + grep ^Subject: patch >actual && + test_cmp expect actual +' + +cat >expect <<'EOF' +Subject: [PATCH] =?UTF-8?q?Fo=C3=B6?= +EOF +test_expect_success '--encode-email-headers overrides format.encodeEmailHeaders' ' + echo content >>file && + git add file && + git commit -m "Foö" && + git config format.encodeEmailHeaders false && + git format-patch --encode-email-headers -1 --stdout >patch && + grep ^Subject: patch >actual && + test_cmp expect actual +' + +cat >expect <<'EOF' Subject: header with . in it EOF test_expect_success 'subject lines do not have 822 atom-quoting' ' @@ -1517,6 +1602,191 @@ test_expect_success 'format patch ignores color.ui' ' test_cmp expect actual ' +test_expect_success 'format patch respects diff.relative' ' + rm -rf subdir && + mkdir subdir && + echo other content >subdir/file2 && + git add subdir/file2 && + git commit -F msg && + test_unconfig diff.relative && + git format-patch --relative=subdir --stdout -1 >expect && + test_config diff.relative true && + git -C subdir format-patch --stdout -1 >actual && + test_cmp expect actual +' + +test_expect_success 'cover letter with invalid --cover-from-description and config' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_must_fail git format-patch --cover-letter --cover-from-description garbage master && + test_config format.coverFromDescription garbage && + test_must_fail git format-patch --cover-letter master +' + +test_expect_success 'cover letter with format.coverFromDescription = default' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription default && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description default' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description default master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = none' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription none && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + ! grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description none' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description none master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + ! grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = message' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription message && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description message' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description message master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = subject' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription subject && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description subject' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description subject master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = auto (short subject line)' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription auto && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description auto (short subject line)' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description auto master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = auto (long subject line)' ' + test_config branch.rebuild-1.description "this is a really long first line and it is over 100 characters long which is the threshold for long subjects + +body" && + test_config format.coverFromDescription auto && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^this is a really long first line and it is over 100 characters long which is the threshold for long subjects$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description auto (long subject line)' ' + test_config branch.rebuild-1.description "this is a really long first line and it is over 100 characters long which is the threshold for long subjects + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description auto master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^this is a really long first line and it is over 100 characters long which is the threshold for long subjects$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with command-line --cover-from-description overrides config' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription none && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description subject master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + test_expect_success 'cover letter using branch description (1)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && @@ -1767,10 +2037,9 @@ test_expect_success 'format-patch errors out when history involves criss-cross' test_must_fail git format-patch --base=auto -1 ' -test_expect_success 'format-patch format.useAutoBaseoption' ' - test_when_finished "git config --unset format.useAutoBase" && +test_expect_success 'format-patch format.useAutoBase option' ' git checkout local && - git config format.useAutoBase true && + test_config format.useAutoBase true && git format-patch --stdout -1 >patch && grep "^base-commit:" patch >actual && git rev-parse upstream >commit-id-base && @@ -1779,8 +2048,7 @@ test_expect_success 'format-patch format.useAutoBaseoption' ' ' test_expect_success 'format-patch --base overrides format.useAutoBase' ' - test_when_finished "git config --unset format.useAutoBase" && - git config format.useAutoBase true && + test_config format.useAutoBase true && git format-patch --stdout --base=HEAD~1 -1 >patch && grep "^base-commit:" patch >actual && git rev-parse HEAD~1 >commit-id-base && @@ -1788,6 +2056,12 @@ test_expect_success 'format-patch --base overrides format.useAutoBase' ' test_cmp expect actual ' +test_expect_success 'format-patch --no-base overrides format.useAutoBase' ' + test_config format.useAutoBase true && + git format-patch --stdout --no-base -1 >patch && + ! grep "^base-commit:" patch +' + test_expect_success 'format-patch --base with --attach' ' git format-patch --attach=mimemime --stdout --base=HEAD~ -1 >patch && sed -n -e "/^base-commit:/s/.*/1/p" -e "/^---*mimemime--$/s/.*/2/p" \ diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index 6b087df3dc..88d3026894 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -16,6 +16,8 @@ test_expect_success "Ray Lehtiniemi's example" ' } while (0); EOF git update-index --add x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && cat <<-\EOF >x && do @@ -24,10 +26,12 @@ test_expect_success "Ray Lehtiniemi's example" ' } while (0); EOF + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && - cat <<-\EOF >expect && + cat <<-EOF >expect && diff --git a/x b/x - index adf3937..6edc172 100644 + index $before..$after 100644 --- a/x +++ b/x @@ -1,3 +1,5 @@ @@ -61,6 +65,8 @@ test_expect_success 'another test, without options' ' EOF git update-index x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && tr "_" " " <<-\EOF >x && _ whitespace at beginning @@ -70,10 +76,12 @@ test_expect_success 'another test, without options' ' unchanged line CR at end EOF + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && - tr "Q_" "\015 " <<-\EOF >expect && + tr "Q_" "\015 " <<-EOF >expect && diff --git a/x b/x - index d99af23..22d9f73 100644 + index $before..$after 100644 --- a/x +++ b/x @@ -1,6 +1,6 @@ @@ -108,9 +116,9 @@ test_expect_success 'another test, without options' ' git diff -w --ignore-cr-at-eol >out && test_must_be_empty out && - tr "Q_" "\015 " <<-\EOF >expect && + tr "Q_" "\015 " <<-EOF >expect && diff --git a/x b/x - index d99af23..22d9f73 100644 + index $before..$after 100644 --- a/x +++ b/x @@ -1,6 +1,6 @@ @@ -132,9 +140,9 @@ test_expect_success 'another test, without options' ' git diff -b --ignore-cr-at-eol >out && test_cmp expect out && - tr "Q_" "\015 " <<-\EOF >expect && + tr "Q_" "\015 " <<-EOF >expect && diff --git a/x b/x - index d99af23..22d9f73 100644 + index $before..$after 100644 --- a/x +++ b/x @@ -1,6 +1,6 @@ @@ -154,9 +162,9 @@ test_expect_success 'another test, without options' ' git diff --ignore-space-at-eol --ignore-cr-at-eol >out && test_cmp expect out && - tr "Q_" "\015 " <<-\EOF >expect && + tr "Q_" "\015 " <<-EOF >expect && diff --git a/x b/x - index_d99af23..22d9f73 100644 + index_$before..$after 100644 --- a/x +++ b/x @@ -1,6 +1,6 @@ @@ -522,13 +530,15 @@ test_expect_success 'ignore-blank-lines: mix changes and blank lines' ' test_expect_success 'check mixed spaces and tabs in indent' ' # This is indented with SP HT SP. echo " foo();" >x && - git diff --check | grep "space before tab in indent" + test_must_fail git diff --check >check && + grep "space before tab in indent" check ' test_expect_success 'check mixed tabs and spaces in indent' ' # This is indented with HT SP HT. echo " foo();" >x && - git diff --check | grep "space before tab in indent" + test_must_fail git diff --check >check && + grep "space before tab in indent" check ' test_expect_success 'check with no whitespace errors' ' @@ -749,20 +759,23 @@ test_expect_success 'check tab-in-indent excluded from wildcard whitespace attri test_expect_success 'line numbers in --check output are correct' ' echo "" >x && echo "foo(); " >>x && - git diff --check | grep "x:2:" + test_must_fail git diff --check >check && + grep "x:2:" check ' test_expect_success 'checkdiff detects new trailing blank lines (1)' ' echo "foo();" >x && echo "" >>x && - git diff --check | grep "new blank line" + test_must_fail git diff --check >check && + grep "new blank line" check ' test_expect_success 'checkdiff detects new trailing blank lines (2)' ' - { echo a; echo b; echo; echo; } >x && + test_write_lines a b "" "" >x && git add x && - { echo a; echo; echo; echo; echo; } >x && - git diff --check | grep "new blank line" + test_write_lines a "" "" "" "" >x && + test_must_fail git diff --check >check && + grep "new blank line" check ' test_expect_success 'checkdiff allows new blank lines' ' @@ -786,23 +799,27 @@ test_expect_success 'whitespace-only changes not reported' ' test_must_be_empty actual ' -cat <<EOF >expect -diff --git a/x b/z -similarity index NUM% -rename from x -rename to z -index 380c32a..a97b785 100644 -EOF test_expect_success 'whitespace-only changes reported across renames' ' git reset --hard && for i in 1 2 3 4 5 6 7 8 9; do echo "$i$i$i$i$i$i"; done >x && git add x && + hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$hash_x") && git commit -m "base" && sed -e "5s/^/ /" x >z && git rm x && git add z && - git diff -w -M --cached | - sed -e "/^similarity index /s/[0-9][0-9]*/NUM/" >actual && + hash_z=$(git hash-object z) && + after=$(git rev-parse --short "$hash_z") && + git diff -w -M --cached >actual.raw && + sed -e "/^similarity index /s/[0-9][0-9]*/NUM/" actual.raw >actual && + cat <<-EOF >expect && + diff --git a/x b/z + similarity index NUM% + rename from x + rename to z + index $before..$after 100644 + EOF test_cmp expect actual ' @@ -834,7 +851,8 @@ test_expect_success 'combined diff with autocrlf conversion' ' git config core.autocrlf true && test_must_fail git merge master && - git diff | sed -e "1,/^@@@/d" >actual && + git diff >actual.raw && + sed -e "1,/^@@@/d" actual.raw >actual && ! grep "^-" actual ' @@ -858,13 +876,18 @@ test_expect_success 'diff that introduces a line with only tabs' ' git config core.whitespace blank-at-eol && git reset --hard && echo "test" >x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && git commit -m "initial" x && echo "{NTN}" | tr "NT" "\n\t" >>x && - git diff --color | test_decode_color >current && + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && + git diff --color >current.raw && + test_decode_color <current.raw >current && - cat >expected <<-\EOF && + cat >expected <<-EOF && <BOLD>diff --git a/x b/x<RESET> - <BOLD>index 9daeafb..2874b91 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1 +1,4 @@<RESET> @@ -883,19 +906,23 @@ test_expect_success 'diff that introduces and removes ws breakages' ' echo "0. blank-at-eol " && echo "1. blank-at-eol " } >x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && git commit -a --allow-empty -m preimage && { echo "0. blank-at-eol " && echo "1. still-blank-at-eol " && echo "2. and a new line " } >x && + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && - git diff --color | - test_decode_color >current && + git diff --color >current.raw && + test_decode_color <current.raw >current && - cat >expected <<-\EOF && + cat >expected <<-EOF && <BOLD>diff --git a/x b/x<RESET> - <BOLD>index d0233a2..700886e 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1,2 +1,3 @@<RESET> @@ -915,16 +942,20 @@ test_expect_success 'ws-error-highlight test setup' ' echo "0. blank-at-eol " && echo "1. blank-at-eol " } >x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && git commit -a --allow-empty -m preimage && { echo "0. blank-at-eol " && echo "1. still-blank-at-eol " && echo "2. and a new line " } >x && + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && - cat >expect.default-old <<-\EOF && + cat >expect.default-old <<-EOF && <BOLD>diff --git a/x b/x<RESET> - <BOLD>index d0233a2..700886e 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1,2 +1,3 @@<RESET> @@ -934,9 +965,9 @@ test_expect_success 'ws-error-highlight test setup' ' <GREEN>+<RESET><GREEN>2. and a new line<RESET><BLUE> <RESET> EOF - cat >expect.all <<-\EOF && + cat >expect.all <<-EOF && <BOLD>diff --git a/x b/x<RESET> - <BOLD>index d0233a2..700886e 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1,2 +1,3 @@<RESET> @@ -946,9 +977,9 @@ test_expect_success 'ws-error-highlight test setup' ' <GREEN>+<RESET><GREEN>2. and a new line<RESET><BLUE> <RESET> EOF - cat >expect.none <<-\EOF + cat >expect.none <<-EOF <BOLD>diff --git a/x b/x<RESET> - <BOLD>index d0233a2..700886e 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1,2 +1,3 @@<RESET> @@ -962,32 +993,32 @@ test_expect_success 'ws-error-highlight test setup' ' test_expect_success 'test --ws-error-highlight option' ' - git diff --color --ws-error-highlight=default,old | - test_decode_color >current && + git diff --color --ws-error-highlight=default,old >current.raw && + test_decode_color <current.raw >current && test_cmp expect.default-old current && - git diff --color --ws-error-highlight=all | - test_decode_color >current && + git diff --color --ws-error-highlight=all >current.raw && + test_decode_color <current.raw >current && test_cmp expect.all current && - git diff --color --ws-error-highlight=none | - test_decode_color >current && + git diff --color --ws-error-highlight=none >current.raw && + test_decode_color <current.raw >current && test_cmp expect.none current ' test_expect_success 'test diff.wsErrorHighlight config' ' - git -c diff.wsErrorHighlight=default,old diff --color | - test_decode_color >current && + git -c diff.wsErrorHighlight=default,old diff --color >current.raw && + test_decode_color <current.raw >current && test_cmp expect.default-old current && - git -c diff.wsErrorHighlight=all diff --color | - test_decode_color >current && + git -c diff.wsErrorHighlight=all diff --color >current.raw && + test_decode_color <current.raw >current && test_cmp expect.all current && - git -c diff.wsErrorHighlight=none diff --color | - test_decode_color >current && + git -c diff.wsErrorHighlight=none diff --color >current.raw && + test_decode_color <current.raw >current && test_cmp expect.none current ' @@ -995,18 +1026,18 @@ test_expect_success 'test diff.wsErrorHighlight config' ' test_expect_success 'option overrides diff.wsErrorHighlight' ' git -c diff.wsErrorHighlight=none \ - diff --color --ws-error-highlight=default,old | - test_decode_color >current && + diff --color --ws-error-highlight=default,old >current.raw && + test_decode_color <current.raw >current && test_cmp expect.default-old current && git -c diff.wsErrorHighlight=default \ - diff --color --ws-error-highlight=all | - test_decode_color >current && + diff --color --ws-error-highlight=all >current.raw && + test_decode_color <current.raw >current && test_cmp expect.all current && git -c diff.wsErrorHighlight=all \ - diff --color --ws-error-highlight=none | - test_decode_color >current && + diff --color --ws-error-highlight=none >current.raw && + test_decode_color <current.raw >current && test_cmp expect.none current ' @@ -1022,14 +1053,16 @@ test_expect_success 'detect moved code, complete file' ' EOF git add test.c && git commit -m "add main function" && + file=$(git rev-parse --short HEAD:test.c) && git mv test.c main.c && test_config color.diff.oldMoved "normal red" && test_config color.diff.newMoved "normal green" && - git diff HEAD --color-moved=zebra --color --no-renames | test_decode_color >actual && - cat >expected <<-\EOF && + git diff HEAD --color-moved=zebra --color --no-renames >actual.raw && + test_decode_color <actual.raw >actual && + cat >expected <<-EOF && <BOLD>diff --git a/main.c b/main.c<RESET> <BOLD>new file mode 100644<RESET> - <BOLD>index 0000000..a986c57<RESET> + <BOLD>index 0000000..$file<RESET> <BOLD>--- /dev/null<RESET> <BOLD>+++ b/main.c<RESET> <CYAN>@@ -0,0 +1,5 @@<RESET> @@ -1040,7 +1073,7 @@ test_expect_success 'detect moved code, complete file' ' <BGREEN>+<RESET><BGREEN>}<RESET> <BOLD>diff --git a/test.c b/test.c<RESET> <BOLD>deleted file mode 100644<RESET> - <BOLD>index a986c57..0000000<RESET> + <BOLD>index $file..0000000<RESET> <BOLD>--- a/test.c<RESET> <BOLD>+++ /dev/null<RESET> <CYAN>@@ -1,5 +0,0 @@<RESET> @@ -1094,6 +1127,8 @@ test_expect_success 'detect malicious moved code, inside file' ' EOF git add main.c test.c && git commit -m "add main and test file" && + before_main=$(git rev-parse --short HEAD:main.c) && + before_test=$(git rev-parse --short HEAD:test.c) && cat <<-\EOF >main.c && #include<stdio.h> int stuff() @@ -1126,10 +1161,15 @@ test_expect_success 'detect malicious moved code, inside file' ' bar(); } EOF - git diff HEAD --no-renames --color-moved=zebra --color | test_decode_color >actual && - cat <<-\EOF >expected && + hash_main=$(git hash-object main.c) && + after_main=$(git rev-parse --short "$hash_main") && + hash_test=$(git hash-object test.c) && + after_test=$(git rev-parse --short "$hash_test") && + git diff HEAD --no-renames --color-moved=zebra --color >actual.raw && + test_decode_color <actual.raw >actual && + cat <<-EOF >expected && <BOLD>diff --git a/main.c b/main.c<RESET> - <BOLD>index 27a619c..7cf9336 100644<RESET> + <BOLD>index $before_main..$after_main 100644<RESET> <BOLD>--- a/main.c<RESET> <BOLD>+++ b/main.c<RESET> <CYAN>@@ -5,13 +5,6 @@<RESET> <RESET>printf("Hello ");<RESET> @@ -1147,7 +1187,7 @@ test_expect_success 'detect malicious moved code, inside file' ' {<RESET> foo();<RESET> <BOLD>diff --git a/test.c b/test.c<RESET> - <BOLD>index 1dc1d85..2bedec9 100644<RESET> + <BOLD>index $before_test..$after_test 100644<RESET> <BOLD>--- a/test.c<RESET> <BOLD>+++ b/test.c<RESET> <CYAN>@@ -4,6 +4,13 @@<RESET> <RESET>int bar()<RESET> @@ -1175,10 +1215,11 @@ test_expect_success 'plain moved code, inside file' ' test_config color.diff.oldMovedAlternative "blue" && test_config color.diff.newMovedAlternative "yellow" && # needs previous test as setup - git diff HEAD --no-renames --color-moved=plain --color | test_decode_color >actual && - cat <<-\EOF >expected && + git diff HEAD --no-renames --color-moved=plain --color >actual.raw && + test_decode_color <actual.raw >actual && + cat <<-EOF >expected && <BOLD>diff --git a/main.c b/main.c<RESET> - <BOLD>index 27a619c..7cf9336 100644<RESET> + <BOLD>index $before_main..$after_main 100644<RESET> <BOLD>--- a/main.c<RESET> <BOLD>+++ b/main.c<RESET> <CYAN>@@ -5,13 +5,6 @@<RESET> <RESET>printf("Hello ");<RESET> @@ -1196,7 +1237,7 @@ test_expect_success 'plain moved code, inside file' ' {<RESET> foo();<RESET> <BOLD>diff --git a/test.c b/test.c<RESET> - <BOLD>index 1dc1d85..2bedec9 100644<RESET> + <BOLD>index $before_test..$after_test 100644<RESET> <BOLD>--- a/test.c<RESET> <BOLD>+++ b/test.c<RESET> <CYAN>@@ -4,6 +4,13 @@<RESET> <RESET>int bar()<RESET> @@ -1754,7 +1795,8 @@ test_expect_success 'move detection with submodules' ' ! grep BRED decoded_actual && # nor did we mess with it another way - git diff --submodule=diff --color | test_decode_color >expect && + git diff --submodule=diff --color >expect.raw && + test_decode_color <expect.raw >expect && test_cmp expect decoded_actual && rm -rf bananas && git submodule deinit bananas @@ -2008,11 +2050,6 @@ test_expect_success 'compare mixed whitespace delta across moved blocks' ' test_cmp expected actual ' -# Note that the "6" in the expected hunk header below is funny, since we only -# show 5 lines (the missing one was blank and thus ignored). This is how -# --ignore-blank-lines behaves even without --function-context, and this test -# is just checking the interaction of the two features. Don't take it as an -# endorsement of that output. test_expect_success 'combine --ignore-blank-lines with --function-context' ' test_write_lines 1 "" 2 3 4 5 >a && test_write_lines 1 2 3 4 >b && @@ -2022,6 +2059,7 @@ test_expect_success 'combine --ignore-blank-lines with --function-context' ' cat <<-\EOF >expect && @@ -1,6 +1,4 @@ 1 + - 2 3 4 @@ -2030,4 +2068,27 @@ test_expect_success 'combine --ignore-blank-lines with --function-context' ' test_cmp expect actual ' +test_expect_success 'combine --ignore-blank-lines with --function-context 2' ' + test_write_lines a b c "" function 1 2 3 4 5 "" 6 7 8 9 >a && + test_write_lines "" a b c "" function 1 2 3 4 5 6 7 8 >b && + test_must_fail git diff --no-index \ + --ignore-blank-lines --function-context a b >actual.raw && + sed -n "/@@/,\$p" <actual.raw >actual && + cat <<-\EOF >expect && + @@ -5,11 +6,9 @@ c + function + 1 + 2 + 3 + 4 + 5 + - + 6 + 7 + 8 + -9 + EOF + test_cmp expect actual +' + test_done diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index 6f5ef0035e..9d07797579 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -32,11 +32,13 @@ diffpatterns=" csharp css dts + elixir fortran fountain golang html java + markdown matlab objc pascal @@ -105,7 +107,6 @@ do result=success fi test_expect_$result "hunk header: $i" " - test_when_finished 'cat actual' && # for debugging only git diff -U1 $i >actual && grep '@@ .* @@.*RIGHT' actual " diff --git a/t/t4018/elixir-do-not-pick-end b/t/t4018/elixir-do-not-pick-end new file mode 100644 index 0000000000..fae08ba7e8 --- /dev/null +++ b/t/t4018/elixir-do-not-pick-end @@ -0,0 +1,5 @@ +defmodule RIGHT do +end +# +# +# ChangeMe; do not pick up 'end' line diff --git a/t/t4018/elixir-ex-unit-test b/t/t4018/elixir-ex-unit-test new file mode 100644 index 0000000000..0560a2b697 --- /dev/null +++ b/t/t4018/elixir-ex-unit-test @@ -0,0 +1,6 @@ +defmodule Test do + test "RIGHT" do + assert true == true + assert ChangeMe + end +end diff --git a/t/t4018/elixir-function b/t/t4018/elixir-function new file mode 100644 index 0000000000..d452f495a7 --- /dev/null +++ b/t/t4018/elixir-function @@ -0,0 +1,5 @@ +def function(RIGHT, arg) do + # comment + # comment + ChangeMe +end diff --git a/t/t4018/elixir-macro b/t/t4018/elixir-macro new file mode 100644 index 0000000000..4f925e9ad4 --- /dev/null +++ b/t/t4018/elixir-macro @@ -0,0 +1,5 @@ +defmacro foo(RIGHT) do + # Code + # Code + ChangeMe +end diff --git a/t/t4018/elixir-module b/t/t4018/elixir-module new file mode 100644 index 0000000000..91a4e7aa20 --- /dev/null +++ b/t/t4018/elixir-module @@ -0,0 +1,9 @@ +defmodule RIGHT do + @moduledoc """ + Foo bar + """ + + def ChangeMe(a) where is_map(a) do + a + end +end diff --git a/t/t4018/elixir-module-func b/t/t4018/elixir-module-func new file mode 100644 index 0000000000..c9910d0675 --- /dev/null +++ b/t/t4018/elixir-module-func @@ -0,0 +1,8 @@ +defmodule Foo do + def fun(RIGHT) do + # Code + # Code + # Code + ChangeMe + end +end diff --git a/t/t4018/elixir-nested-module b/t/t4018/elixir-nested-module new file mode 100644 index 0000000000..771ebc5c42 --- /dev/null +++ b/t/t4018/elixir-nested-module @@ -0,0 +1,9 @@ +defmodule MyApp.RIGHT do + @moduledoc """ + Foo bar + """ + + def ChangeMe(a) where is_map(a) do + a + end +end diff --git a/t/t4018/elixir-private-function b/t/t4018/elixir-private-function new file mode 100644 index 0000000000..1aabe33b7a --- /dev/null +++ b/t/t4018/elixir-private-function @@ -0,0 +1,5 @@ +defp function(RIGHT, arg) do + # comment + # comment + ChangeMe +end diff --git a/t/t4018/elixir-protocol b/t/t4018/elixir-protocol new file mode 100644 index 0000000000..7d9173691e --- /dev/null +++ b/t/t4018/elixir-protocol @@ -0,0 +1,6 @@ +defprotocol RIGHT do + @doc """ + Calculates the size (and not the length!) of a data structure + """ + def size(data, ChangeMe) +end diff --git a/t/t4018/elixir-protocol-implementation b/t/t4018/elixir-protocol-implementation new file mode 100644 index 0000000000..f9234bbfc4 --- /dev/null +++ b/t/t4018/elixir-protocol-implementation @@ -0,0 +1,5 @@ +defimpl RIGHT do + # Docs + # Docs + def foo(ChangeMe), do: :ok +end diff --git a/t/t4018/markdown-heading-indented b/t/t4018/markdown-heading-indented new file mode 100644 index 0000000000..1991c2bd45 --- /dev/null +++ b/t/t4018/markdown-heading-indented @@ -0,0 +1,6 @@ +Indented headings are allowed, as long as the indent is no more than 3 spaces. + + ### RIGHT + +- something +- ChangeMe diff --git a/t/t4018/markdown-heading-non-headings b/t/t4018/markdown-heading-non-headings new file mode 100644 index 0000000000..c479c1a3f1 --- /dev/null +++ b/t/t4018/markdown-heading-non-headings @@ -0,0 +1,17 @@ +Headings can be right next to other lines of the file: +# RIGHT +Indents of four or more spaces make a code block: + + # code comment, not heading + +If there's no space after the final hash, it's not a heading: + +#hashtag + +Sequences of more than 6 hashes don't make a heading: + +####### over-enthusiastic heading + +So the detected heading should be right up at the start of this file. + +ChangeMe diff --git a/t/t4018/python-async-def b/t/t4018/python-async-def new file mode 100644 index 0000000000..87640e03d2 --- /dev/null +++ b/t/t4018/python-async-def @@ -0,0 +1,4 @@ +async def RIGHT(pi: int = 3.14): + while True: + break + return ChangeMe() diff --git a/t/t4018/python-class b/t/t4018/python-class new file mode 100644 index 0000000000..ba9e741430 --- /dev/null +++ b/t/t4018/python-class @@ -0,0 +1,4 @@ +class RIGHT(int, str): + # comment + # another comment + # ChangeMe diff --git a/t/t4018/python-def b/t/t4018/python-def new file mode 100644 index 0000000000..e50b31b0ad --- /dev/null +++ b/t/t4018/python-def @@ -0,0 +1,4 @@ +def RIGHT(pi: int = 3.14): + while True: + break + return ChangeMe() diff --git a/t/t4018/python-indented-async-def b/t/t4018/python-indented-async-def new file mode 100644 index 0000000000..f5d03258af --- /dev/null +++ b/t/t4018/python-indented-async-def @@ -0,0 +1,7 @@ +class Foo: + async def RIGHT(self, x: int): + return [ + 1, + 2, + ChangeMe, + ] diff --git a/t/t4018/python-indented-class b/t/t4018/python-indented-class new file mode 100644 index 0000000000..19b4f35c4c --- /dev/null +++ b/t/t4018/python-indented-class @@ -0,0 +1,5 @@ +if TYPE_CHECKING: + class RIGHT: + # comment + # another comment + # ChangeMe diff --git a/t/t4018/python-indented-def b/t/t4018/python-indented-def new file mode 100644 index 0000000000..208fbadd2b --- /dev/null +++ b/t/t4018/python-indented-def @@ -0,0 +1,7 @@ +class Foo: + def RIGHT(self, x: int): + return [ + 1, + 2, + ChangeMe, + ] diff --git a/t/t4026-color.sh b/t/t4026-color.sh index 671e951ee5..c0b642c1ab 100755 --- a/t/t4026-color.sh +++ b/t/t4026-color.sh @@ -30,6 +30,14 @@ test_expect_success 'attribute before color name' ' color "bold red" "[1;31m" ' +test_expect_success 'aixterm bright fg color' ' + color "brightred" "[91m" +' + +test_expect_success 'aixterm bright bg color' ' + color "green brightblue" "[32;104m" +' + test_expect_success 'color name before attribute' ' color "red bold" "[1;31m" ' @@ -74,6 +82,10 @@ test_expect_success '0-7 are aliases for basic ANSI color names' ' color "0 7" "[30;47m" ' +test_expect_success '8-15 are aliases for aixterm color names' ' + color "12 13" "[94;105m" +' + test_expect_success '256 colors' ' color "254 bold 255" "[1;38;5;254;48;5;255m" ' diff --git a/t/t4027-diff-submodule.sh b/t/t4027-diff-submodule.sh index 9aa8e2b39b..e29deaf4a5 100755 --- a/t/t4027-diff-submodule.sh +++ b/t/t4027-diff-submodule.sh @@ -6,6 +6,7 @@ test_description='difference in submodules' . "$TEST_DIRECTORY"/diff-lib.sh test_expect_success setup ' + test_oid_init && test_tick && test_create_repo sub && ( @@ -36,7 +37,8 @@ test_expect_success setup ' ' test_expect_success 'git diff --raw HEAD' ' - git diff --raw --abbrev=40 HEAD >actual && + hexsz=$(test_oid hexsz) && + git diff --raw --abbrev=$hexsz HEAD >actual && test_cmp expect actual ' @@ -245,23 +247,21 @@ test_expect_success 'git diff (empty submodule dir)' ' ' test_expect_success 'conflicted submodule setup' ' - - # 39 efs - c=fffffffffffffffffffffffffffffffffffffff && + c=$(test_oid ff_1) && ( echo "000000 $ZERO_OID 0 sub" && echo "160000 1$c 1 sub" && echo "160000 2$c 2 sub" && echo "160000 3$c 3 sub" ) | git update-index --index-info && - echo >expect.nosub '\''diff --cc sub + echo >expect.nosub "diff --cc sub index 2ffffff,3ffffff..0000000 --- a/sub +++ b/sub @@@ -1,1 -1,1 +1,1 @@@ -- Subproject commit 2fffffffffffffffffffffffffffffffffffffff - -Subproject commit 3fffffffffffffffffffffffffffffffffffffff -++Subproject commit 0000000000000000000000000000000000000000'\'' && +- Subproject commit 2$c + -Subproject commit 3$c +++Subproject commit $ZERO_OID" && hh=$(git rev-parse HEAD) && sed -e "s/$ZERO_OID/$hh/" expect.nosub >expect.withsub diff --git a/t/t4034-diff-words.sh b/t/t4034-diff-words.sh index 9a93c2a3e0..fb145aa173 100755 --- a/t/t4034-diff-words.sh +++ b/t/t4034-diff-words.sh @@ -19,9 +19,11 @@ cat >post.simple <<-\EOF aeff = aeff * ( aaa ) EOF -cat >expect.letter-runs-are-words <<-\EOF +pre=$(git rev-parse --short $(git hash-object pre.simple)) +post=$(git rev-parse --short $(git hash-object post.simple)) +cat >expect.letter-runs-are-words <<-EOF <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -33,9 +35,9 @@ cat >expect.letter-runs-are-words <<-\EOF <GREEN>aeff = aeff * ( aaa<RESET> ) EOF -cat >expect.non-whitespace-is-word <<-\EOF +cat >expect.non-whitespace-is-word <<-EOF <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -49,9 +51,12 @@ cat >expect.non-whitespace-is-word <<-\EOF EOF word_diff () { + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && test_must_fail git diff --no-index "$@" pre post >output && test_decode_color <output >output.decrypted && - test_cmp expect output.decrypted + sed -e "2s/index [^ ]*/index $pre..$post/" expect >expected + test_cmp expected output.decrypted } test_language_driver () { @@ -77,9 +82,9 @@ test_expect_success 'set up pre and post with runs of whitespace' ' ' test_expect_success 'word diff with runs of whitespace' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -97,9 +102,9 @@ test_expect_success 'word diff with runs of whitespace' ' ' test_expect_success '--word-diff=porcelain' ' - sed 's/#.*$//' >expect <<-\EOF && + sed 's/#.*$//' >expect <<-EOF && diff --git a/pre b/post - index 330b04f..5ed8eff 100644 + index $pre..$post 100644 --- a/pre +++ b/post @@ -1,3 +1,7 @@ @@ -121,9 +126,9 @@ test_expect_success '--word-diff=porcelain' ' ' test_expect_success '--word-diff=plain' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && diff --git a/pre b/post - index 330b04f..5ed8eff 100644 + index $pre..$post 100644 --- a/pre +++ b/post @@ -1,3 +1,7 @@ @@ -140,9 +145,9 @@ test_expect_success '--word-diff=plain' ' ' test_expect_success '--word-diff=plain --color' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -158,9 +163,9 @@ test_expect_success '--word-diff=plain --color' ' ' test_expect_success 'word diff without context' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> @@ -207,9 +212,9 @@ test_expect_success 'command-line overrides config' ' ' test_expect_success 'command-line overrides config: --word-diff-regex' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -234,9 +239,9 @@ test_expect_success 'setup: remove diff driver regex' ' ' test_expect_success 'use configured regex' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -254,9 +259,11 @@ test_expect_success 'use configured regex' ' test_expect_success 'test parsing words for newline' ' echo "aaa (aaa)" >pre && echo "aaa (aaa) aaa" >post && - cat >expect <<-\EOF && + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index c29453b..be22f37 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> @@ -268,9 +275,11 @@ test_expect_success 'test parsing words for newline' ' test_expect_success 'test when words are only removed at the end' ' echo "(:" >pre && echo "(" >post && - cat >expect <<-\EOF && + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 289cb9d..2d06f37 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> @@ -282,9 +291,11 @@ test_expect_success 'test when words are only removed at the end' ' test_expect_success '--word-diff=none' ' echo "(:" >pre && echo "(" >post && - cat >expect <<-\EOF && + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && diff --git a/pre b/post - index 289cb9d..2d06f37 100644 + index $pre..$post 100644 --- a/pre +++ b/post @@ -1 +1 @@ @@ -317,16 +328,6 @@ test_language_driver ruby test_language_driver tex test_expect_success 'word-diff with diff.sbe' ' - cat >expect <<-\EOF && - diff --git a/pre b/post - index a1a53b5..bc8fe6d 100644 - --- a/pre - +++ b/post - @@ -1,3 +1,3 @@ - a - - [-b-]{+c+} - EOF cat >pre <<-\EOF && a @@ -337,21 +338,35 @@ test_expect_success 'word-diff with diff.sbe' ' c EOF + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && + diff --git a/pre b/post + index $pre..$post 100644 + --- a/pre + +++ b/post + @@ -1,3 +1,3 @@ + a + + [-b-]{+c+} + EOF test_config diff.suppress-blank-empty true && word_diff --word-diff=plain ' test_expect_success 'word-diff with no newline at EOF' ' - cat >expect <<-\EOF && + printf "%s" "a a a a a" >pre && + printf "%s" "a a ab a a" >post && + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && diff --git a/pre b/post - index 7bf316e..3dd0303 100644 + index $pre..$post 100644 --- a/pre +++ b/post @@ -1 +1 @@ a a [-a-]{+ab+} a a EOF - printf "%s" "a a a a a" >pre && - printf "%s" "a a ab a a" >post && word_diff --word-diff=plain ' diff --git a/t/t4038-diff-combined.sh b/t/t4038-diff-combined.sh index b9d876efa2..94680836ce 100755 --- a/t/t4038-diff-combined.sh +++ b/t/t4038-diff-combined.sh @@ -354,7 +354,7 @@ test_expect_failure 'combine diff coalesce three parents' ' ' # Test for a bug reported at -# https://public-inbox.org/git/20130515143508.GO25742@login.drsnuggles.stderr.nl/ +# https://lore.kernel.org/git/20130515143508.GO25742@login.drsnuggles.stderr.nl/ # where a delete lines were missing from combined diff output when they # occurred exactly before the context lines of a later change. test_expect_success 'combine diff missing delete bug' ' @@ -440,11 +440,13 @@ test_expect_success 'setup for --combined-all-paths' ' git branch side2c && git checkout side1c && test_seq 1 10 >filename-side1c && + side1cf=$(git hash-object filename-side1c) && git add filename-side1c && git commit -m with && git checkout side2c && test_seq 1 9 >filename-side2c && echo ten >>filename-side2c && + side2cf=$(git hash-object filename-side2c) && git add filename-side2c && git commit -m iam && git checkout -b mergery side1c && @@ -452,13 +454,14 @@ test_expect_success 'setup for --combined-all-paths' ' git rm filename-side1c && echo eleven >>filename-side2c && git mv filename-side2c filename-merged && + mergedf=$(git hash-object filename-merged) && git add filename-merged && git commit ' test_expect_success '--combined-all-paths and --raw' ' - cat <<-\EOF >expect && - ::100644 100644 100644 f00c965d8307308469e537302baa73048488f162 088bd5d92c2a8e0203ca8e7e4c2a5c692f6ae3f7 333b9c62519f285e1854830ade0fe1ef1d40ee1b RR filename-side1c filename-side2c filename-merged + cat <<-EOF >expect && + ::100644 100644 100644 $side1cf $side2cf $mergedf RR filename-side1c filename-side2c filename-merged EOF git diff-tree -c -M --raw --combined-all-paths HEAD >actual.tmp && sed 1d <actual.tmp >actual && @@ -482,11 +485,13 @@ test_expect_success FUNNYNAMES 'setup for --combined-all-paths with funny names' git checkout side1d && test_seq 1 10 >"$(printf "file\twith\ttabs")" && git add file* && + side1df=$(git hash-object *tabs) && git commit -m with && git checkout side2d && test_seq 1 9 >"$(printf "i\tam\ttabbed")" && echo ten >>"$(printf "i\tam\ttabbed")" && git add *tabbed && + side2df=$(git hash-object *tabbed) && git commit -m iam && git checkout -b funny-names-mergery side1d && git merge --no-commit side2d && @@ -494,12 +499,14 @@ test_expect_success FUNNYNAMES 'setup for --combined-all-paths with funny names' echo eleven >>"$(printf "i\tam\ttabbed")" && git mv "$(printf "i\tam\ttabbed")" "$(printf "fickle\tnaming")" && git add fickle* && - git commit + headf=$(git hash-object fickle*) && + git commit && + head=$(git rev-parse HEAD) ' test_expect_success FUNNYNAMES '--combined-all-paths and --raw and funny names' ' - cat <<-\EOF >expect && - ::100644 100644 100644 f00c965d8307308469e537302baa73048488f162 088bd5d92c2a8e0203ca8e7e4c2a5c692f6ae3f7 333b9c62519f285e1854830ade0fe1ef1d40ee1b RR "file\twith\ttabs" "i\tam\ttabbed" "fickle\tnaming" + cat <<-EOF >expect && + ::100644 100644 100644 $side1df $side2df $headf RR "file\twith\ttabs" "i\tam\ttabbed" "fickle\tnaming" EOF git diff-tree -c -M --raw --combined-all-paths HEAD >actual.tmp && sed 1d <actual.tmp >actual && @@ -507,7 +514,7 @@ test_expect_success FUNNYNAMES '--combined-all-paths and --raw and funny names' ' test_expect_success FUNNYNAMES '--combined-all-paths and --raw -and -z and funny names' ' - printf "aaf8087c3cbd4db8e185a2d074cf27c53cfb75d7\0::100644 100644 100644 f00c965d8307308469e537302baa73048488f162 088bd5d92c2a8e0203ca8e7e4c2a5c692f6ae3f7 333b9c62519f285e1854830ade0fe1ef1d40ee1b RR\0file\twith\ttabs\0i\tam\ttabbed\0fickle\tnaming\0" >expect && + printf "$head\0::100644 100644 100644 $side1df $side2df $headf RR\0file\twith\ttabs\0i\tam\ttabbed\0fickle\tnaming\0" >expect && git diff-tree -c -M --raw --combined-all-paths -z HEAD >actual && test_cmp expect actual ' diff --git a/t/t4039-diff-assume-unchanged.sh b/t/t4039-diff-assume-unchanged.sh index 53ac44b0f0..0eb0314a8b 100755 --- a/t/t4039-diff-assume-unchanged.sh +++ b/t/t4039-diff-assume-unchanged.sh @@ -12,6 +12,7 @@ test_expect_success 'setup' ' git commit -m zero && echo one > one && echo two > two && + blob=$(git hash-object one) && git add one two && git commit -m onetwo && git update-index --assume-unchanged one && @@ -20,7 +21,7 @@ test_expect_success 'setup' ' ' test_expect_success 'diff-index does not examine assume-unchanged entries' ' - git diff-index HEAD^ -- one | grep -q 5626abf0f72e58d7a153368ba57db4c673c0e171 + git diff-index HEAD^ -- one | grep -q $blob ' test_expect_success 'diff-files does not examine assume-unchanged entries' ' diff --git a/t/t4041-diff-submodule-option.sh b/t/t4041-diff-submodule-option.sh index 619bf97098..f852136585 100755 --- a/t/t4041-diff-submodule-option.sh +++ b/t/t4041-diff-submodule-option.sh @@ -284,7 +284,7 @@ test_expect_success 'submodule contains untracked content (all ignored)' ' test_must_be_empty actual ' -test_expect_success 'submodule contains untracked and modifed content' ' +test_expect_success 'submodule contains untracked and modified content' ' echo new > sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -294,7 +294,7 @@ test_expect_success 'submodule contains untracked and modifed content' ' test_cmp expected actual ' -test_expect_success 'submodule contains untracked and modifed content (untracked ignored)' ' +test_expect_success 'submodule contains untracked and modified content (untracked ignored)' ' echo new > sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -303,19 +303,19 @@ test_expect_success 'submodule contains untracked and modifed content (untracked test_cmp expected actual ' -test_expect_success 'submodule contains untracked and modifed content (dirty ignored)' ' +test_expect_success 'submodule contains untracked and modified content (dirty ignored)' ' echo new > sm1/foo6 && git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && test_must_be_empty actual ' -test_expect_success 'submodule contains untracked and modifed content (all ignored)' ' +test_expect_success 'submodule contains untracked and modified content (all ignored)' ' echo new > sm1/foo6 && git diff-index -p --ignore-submodules --submodule=log HEAD >actual && test_must_be_empty actual ' -test_expect_success 'submodule contains modifed content' ' +test_expect_success 'submodule contains modified content' ' rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -369,7 +369,7 @@ test_expect_success 'modified submodule contains untracked content (all ignored) test_must_be_empty actual ' -test_expect_success 'modified submodule contains untracked and modifed content' ' +test_expect_success 'modified submodule contains untracked and modified content' ' echo modification >> sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -381,7 +381,7 @@ test_expect_success 'modified submodule contains untracked and modifed content' test_cmp expected actual ' -test_expect_success 'modified submodule contains untracked and modifed content (untracked ignored)' ' +test_expect_success 'modified submodule contains untracked and modified content (untracked ignored)' ' echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -392,7 +392,7 @@ test_expect_success 'modified submodule contains untracked and modifed content ( test_cmp expected actual ' -test_expect_success 'modified submodule contains untracked and modifed content (dirty ignored)' ' +test_expect_success 'modified submodule contains untracked and modified content (dirty ignored)' ' echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -402,13 +402,13 @@ test_expect_success 'modified submodule contains untracked and modifed content ( test_cmp expected actual ' -test_expect_success 'modified submodule contains untracked and modifed content (all ignored)' ' +test_expect_success 'modified submodule contains untracked and modified content (all ignored)' ' echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules --submodule=log HEAD >actual && test_must_be_empty actual ' -test_expect_success 'modified submodule contains modifed content' ' +test_expect_success 'modified submodule contains modified content' ' rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && cat >expected <<-EOF && diff --git a/t/t4044-diff-index-unique-abbrev.sh b/t/t4044-diff-index-unique-abbrev.sh index 647905e01f..4701796d10 100755 --- a/t/t4044-diff-index-unique-abbrev.sh +++ b/t/t4044-diff-index-unique-abbrev.sh @@ -3,34 +3,48 @@ test_description='test unique sha1 abbreviation on "index from..to" line' . ./test-lib.sh -if ! test_have_prereq SHA1 -then - skip_all='not using SHA-1 for objects' - test_done -fi - -cat >expect_initial <<EOF -100644 blob 51d2738463ea4ca66f8691c91e33ce64b7d41bb1 foo -EOF +test_expect_success 'setup' ' + test_oid_cache <<-EOF && + val1 sha1:4827 + val1 sha256:5664 -cat >expect_update <<EOF -100644 blob 51d2738efb4ad8a1e40bed839ab8e116f0a15e47 foo -EOF + val2 sha1:11742 + val2 sha256:10625 -test_expect_success 'setup' ' - echo 4827 > foo && + hash1 sha1:51d2738463ea4ca66f8691c91e33ce64b7d41bb1 + hash1 sha256:ae31dfff0af93b2c62b0098a039b38569c43b0a7e97b873000ca42d128f27350 + + hasht1 sha1:51d27384 + hasht1 sha256:ae31dfff + + hash2 sha1:51d2738efb4ad8a1e40bed839ab8e116f0a15e47 + hash2 sha256:ae31dffada88a46fd5f53c7ed5aa25a7a8951f1d5e88456c317c8d5484d263e5 + + hasht2 sha1:51d2738e + hasht2 sha256:ae31dffa + EOF + + cat >expect_initial <<-EOF && + 100644 blob $(test_oid hash1) foo + EOF + + cat >expect_update <<-EOF && + 100644 blob $(test_oid hash2) foo + EOF + + echo "$(test_oid val1)" > foo && git add foo && git commit -m "initial" && git cat-file -p HEAD: > actual && test_cmp expect_initial actual && - echo 11742 > foo && + echo "$(test_oid val2)" > foo && git commit -a -m "update" && git cat-file -p HEAD: > actual && test_cmp expect_update actual ' cat >expect <<EOF -index 51d27384..51d2738e 100644 +index $(test_oid hasht1)..$(test_oid hasht2) 100644 EOF test_expect_success 'diff does not produce ambiguous index line' ' diff --git a/t/t4045-diff-relative.sh b/t/t4045-diff-relative.sh index 36f8ed8a81..7be1de736d 100755 --- a/t/t4045-diff-relative.sh +++ b/t/t4045-diff-relative.sh @@ -8,7 +8,8 @@ test_expect_success 'setup' ' echo content >file1 && mkdir subdir && echo other content >subdir/file2 && - blob=$(git hash-object subdir/file2) && + blob_file1=$(git hash-object file1) && + blob_file2=$(git hash-object subdir/file2) && git add . && git commit -m one ' @@ -18,7 +19,7 @@ check_diff () { shift expect=$1 shift - short_blob=$(git rev-parse --short $blob) + short_blob=$(git rev-parse --short $blob_file2) cat >expected <<-EOF diff --git a/$expect b/$expect new file mode 100644 @@ -70,7 +71,7 @@ check_raw () { expect=$1 shift cat >expected <<-EOF - :000000 100644 0000000000000000000000000000000000000000 $blob A $expect + :000000 100644 $ZERO_OID $blob_file2 A $expect EOF test_expect_success "--raw $*" " git -C '$dir' diff --no-abbrev --raw $* HEAD^ >actual && @@ -86,4 +87,79 @@ do check_$type . dir/file2 --relative=sub done +check_diff_relative_option () { + dir=$1 + shift + expect=$1 + shift + relative_opt=$1 + shift + test_expect_success "config diff.relative $relative_opt -p $*" " + short_blob=\$(git rev-parse --short $blob_file2) && + cat >expected <<-EOF && + diff --git a/$expect b/$expect + new file mode 100644 + index 0000000..\$short_blob + --- /dev/null + +++ b/$expect + @@ -0,0 +1 @@ + +other content + EOF + test_config -C $dir diff.relative $relative_opt && + git -C '$dir' diff -p $* HEAD^ >actual && + test_cmp expected actual + " +} + +check_diff_no_relative_option () { + dir=$1 + shift + expect=$1 + shift + relative_opt=$1 + shift + test_expect_success "config diff.relative $relative_opt -p $*" " + short_blob_file1=\$(git rev-parse --short $blob_file1) && + short_blob_file2=\$(git rev-parse --short $blob_file2) && + cat >expected <<-EOF && + diff --git a/file1 b/file1 + new file mode 100644 + index 0000000..\$short_blob_file1 + --- /dev/null + +++ b/file1 + @@ -0,0 +1 @@ + +content + diff --git a/$expect b/$expect + new file mode 100644 + index 0000000..\$short_blob_file2 + --- /dev/null + +++ b/$expect + @@ -0,0 +1 @@ + +other content + EOF + test_config -C $dir diff.relative $relative_opt && + git -C '$dir' diff -p $* HEAD^ >actual && + test_cmp expected actual + " +} + +check_diff_no_relative_option . subdir/file2 false +check_diff_no_relative_option . subdir/file2 true --no-relative +check_diff_no_relative_option . subdir/file2 false --no-relative +check_diff_no_relative_option subdir subdir/file2 false +check_diff_no_relative_option subdir subdir/file2 true --no-relative +check_diff_no_relative_option subdir subdir/file2 false --no-relative + +check_diff_relative_option . file2 false --relative=subdir/ +check_diff_relative_option . file2 false --relative=subdir +check_diff_relative_option . file2 true --relative=subdir/ +check_diff_relative_option . file2 true --relative=subdir +check_diff_relative_option subdir file2 false --relative +check_diff_relative_option subdir file2 true --relative +check_diff_relative_option subdir file2 true +check_diff_relative_option subdir file2 false --no-relative --relative +check_diff_relative_option subdir file2 true --no-relative --relative +check_diff_relative_option . file2 false --no-relative --relative=subdir +check_diff_relative_option . file2 true --no-relative --relative=subdir + test_done diff --git a/t/t4048-diff-combined-binary.sh b/t/t4048-diff-combined-binary.sh index 87a8949500..7f9ad9fa3d 100755 --- a/t/t4048-diff-combined-binary.sh +++ b/t/t4048-diff-combined-binary.sh @@ -9,24 +9,27 @@ test_expect_success 'setup binary merge conflict' ' git commit -m one && echo twoQ2 | q_to_nul >binary && git commit -a -m two && + two=$(git rev-parse --short HEAD:binary) && git checkout -b branch-binary HEAD^ && echo threeQ3 | q_to_nul >binary && git commit -a -m three && + three=$(git rev-parse --short HEAD:binary) && test_must_fail git merge master && echo resolvedQhooray | q_to_nul >binary && - git commit -a -m resolved + git commit -a -m resolved && + res=$(git rev-parse --short HEAD:binary) ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --git a/binary b/binary -index 7ea6ded..9563691 100644 +index $three..$res 100644 Binary files a/binary and b/binary differ resolved diff --git a/binary b/binary -index 6197570..9563691 100644 +index $two..$res 100644 Binary files a/binary and b/binary differ EOF test_expect_success 'diff -m indicates binary-ness' ' @@ -34,11 +37,11 @@ test_expect_success 'diff -m indicates binary-ness' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --combined binary -index 7ea6ded,6197570..9563691 +index $three,$two..$res Binary files differ EOF test_expect_success 'diff -c indicates binary-ness' ' @@ -46,11 +49,11 @@ test_expect_success 'diff -c indicates binary-ness' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --cc binary -index 7ea6ded,6197570..9563691 +index $three,$two..$res Binary files differ EOF test_expect_success 'diff --cc indicates binary-ness' ' @@ -62,23 +65,26 @@ test_expect_success 'setup non-binary with binary attribute' ' git checkout master && test_commit one text && test_commit two text && + two=$(git rev-parse --short HEAD:text) && git checkout -b branch-text HEAD^ && test_commit three text && + three=$(git rev-parse --short HEAD:text) && test_must_fail git merge master && test_commit resolved text && + res=$(git rev-parse --short HEAD:text) && echo text -diff >.gitattributes ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --git a/text b/text -index 2bdf67a..2ab19ae 100644 +index $three..$res 100644 Binary files a/text and b/text differ resolved diff --git a/text b/text -index f719efd..2ab19ae 100644 +index $two..$res 100644 Binary files a/text and b/text differ EOF test_expect_success 'diff -m respects binary attribute' ' @@ -86,11 +92,11 @@ test_expect_success 'diff -m respects binary attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --combined text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res Binary files differ EOF test_expect_success 'diff -c respects binary attribute' ' @@ -98,11 +104,11 @@ test_expect_success 'diff -c respects binary attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --cc text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res Binary files differ EOF test_expect_success 'diff --cc respects binary attribute' ' @@ -115,11 +121,11 @@ test_expect_success 'setup textconv attribute' ' git config diff.upcase.textconv "tr a-z A-Z <" ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --git a/text b/text -index 2bdf67a..2ab19ae 100644 +index $three..$res 100644 --- a/text +++ b/text @@ -1 +1 @@ @@ -128,7 +134,7 @@ index 2bdf67a..2ab19ae 100644 resolved diff --git a/text b/text -index f719efd..2ab19ae 100644 +index $two..$res 100644 --- a/text +++ b/text @@ -1 +1 @@ @@ -140,11 +146,11 @@ test_expect_success 'diff -m respects textconv attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --combined text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res --- a/text +++ b/text @@@ -1,1 -1,1 +1,1 @@@ @@ -157,11 +163,11 @@ test_expect_success 'diff -c respects textconv attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --cc text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res --- a/text +++ b/text @@@ -1,1 -1,1 +1,1 @@@ @@ -174,9 +180,9 @@ test_expect_success 'diff --cc respects textconv attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF diff --combined text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res --- a/text +++ b/text @@@ -1,1 -1,1 +1,1 @@@ @@ -190,9 +196,9 @@ test_expect_success 'diff-tree plumbing does not respect textconv' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF diff --cc text -index 2bdf67a,f719efd..0000000 +index $three,$two..0000000 --- a/text +++ b/text @@@ -1,1 -1,1 +1,5 @@@ diff --git a/t/t4054-diff-bogus-tree.sh b/t/t4054-diff-bogus-tree.sh index fcae82fffa..8c95f152b2 100755 --- a/t/t4054-diff-bogus-tree.sh +++ b/t/t4054-diff-bogus-tree.sh @@ -4,8 +4,9 @@ test_description='test diff with a bogus tree containing the null sha1' . ./test-lib.sh test_expect_success 'create bogus tree' ' + name=$(echo $ZERO_OID | sed -e "s/00/Q/g") && bogus_tree=$( - printf "100644 fooQQQQQQQQQQQQQQQQQQQQQ" | + printf "100644 fooQ$name" | q_to_nul | git hash-object -w --stdin -t tree ) diff --git a/t/t4057-diff-combined-paths.sh b/t/t4057-diff-combined-paths.sh index dff36b77ec..0b78573733 100755 --- a/t/t4057-diff-combined-paths.sh +++ b/t/t4057-diff-combined-paths.sh @@ -14,7 +14,7 @@ diffc_verify () { test_expect_success 'trivial merge - combine-diff empty' ' for i in $(test_seq 1 9) do - echo $i >$i.txt && + echo $i >$i.txt && git add $i.txt done && git commit -m "init" && @@ -33,7 +33,7 @@ test_expect_success 'trivial merge - combine-diff empty' ' ' -test_expect_success 'only one trully conflicting path' ' +test_expect_success 'only one truly conflicting path' ' git checkout side && for i in $(test_seq 2 9) do diff --git a/t/t4060-diff-submodule-option-diff-format.sh b/t/t4060-diff-submodule-option-diff-format.sh index 9dcb69df5c..fc8229c726 100755 --- a/t/t4060-diff-submodule-option-diff-format.sh +++ b/t/t4060-diff-submodule-option-diff-format.sh @@ -42,6 +42,17 @@ commit_file () { git commit "$@" -m "Commit $*" >/dev/null } +diff_cmp () { + for i in "$1" "$2" + do + sed -e 's/^index 0000000\.\.[0-9a-f]*/index 0000000..1234567/' \ + -e 's/^index [0-9a-f]*\.\.[0-9a-f]*/index 1234567..89abcde/' \ + "$i" >"$i.compare" || return 1 + done && + test_cmp "$1.compare" "$2.compare" && + rm -f "$1.compare" "$2.compare" +} + test_expect_success 'setup repository' ' test_create_repo sm1 && add_file . foo && @@ -69,7 +80,7 @@ test_expect_success 'added submodule' ' @@ -0,0 +1 @@ +foo2 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'added submodule, set diff.submodule' ' @@ -93,7 +104,7 @@ test_expect_success 'added submodule, set diff.submodule' ' @@ -0,0 +1 @@ +foo2 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success '--submodule=short overrides diff.submodule' ' @@ -109,7 +120,7 @@ test_expect_success '--submodule=short overrides diff.submodule' ' @@ -0,0 +1 @@ +Subproject commit $fullhead1 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'diff.submodule does not affect plumbing' ' @@ -124,7 +135,7 @@ test_expect_success 'diff.submodule does not affect plumbing' ' @@ -0,0 +1 @@ +Subproject commit $fullhead1 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm1 && @@ -142,7 +153,7 @@ test_expect_success 'modified submodule(forward)' ' @@ -0,0 +1 @@ +foo3 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule(forward)' ' @@ -157,7 +168,7 @@ test_expect_success 'modified submodule(forward)' ' @@ -0,0 +1 @@ +foo3 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule(forward) --submodule' ' @@ -166,7 +177,7 @@ test_expect_success 'modified submodule(forward) --submodule' ' Submodule sm1 $head1..$head2: > Add foo3 ($added foo3) EOF - test_cmp expected actual + diff_cmp expected actual ' fullhead2=$(cd sm1; git rev-parse --verify HEAD) @@ -181,7 +192,7 @@ test_expect_success 'modified submodule(forward) --submodule=short' ' -Subproject commit $fullhead1 +Subproject commit $fullhead2 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm1 && @@ -210,7 +221,7 @@ test_expect_success 'modified submodule(backward)' ' @@ -1 +0,0 @@ -foo3 EOF - test_cmp expected actual + diff_cmp expected actual ' head4=$(add_file sm1 foo4 foo5) @@ -247,7 +258,7 @@ test_expect_success 'modified submodule(backward and forward)' ' @@ -0,0 +1 @@ +foo5 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm1 && @@ -291,7 +302,7 @@ test_expect_success 'typechanged submodule(submodule->blob), --cached' ' @@ -0,0 +1 @@ +sm1 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'typechanged submodule(submodule->blob)' ' @@ -327,7 +338,7 @@ test_expect_success 'typechanged submodule(submodule->blob)' ' @@ -0,0 +1 @@ +foo5 EOF - test_cmp expected actual + diff_cmp expected actual ' rm -rf sm1 && @@ -344,7 +355,7 @@ test_expect_success 'typechanged submodule(submodule->blob)' ' @@ -0,0 +1 @@ +sm1 EOF - test_cmp expected actual + diff_cmp expected actual ' rm -f sm1 && @@ -356,7 +367,7 @@ test_expect_success 'nonexistent commit' ' cat >expected <<-EOF && Submodule sm1 $head4...$head6 (commits not present) EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file @@ -386,11 +397,12 @@ test_expect_success 'typechanged submodule(blob->submodule)' ' @@ -0,0 +1 @@ +foo7 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm1 && test_expect_success 'submodule is up to date' ' + head7=$(git -C sm1 rev-parse --short --verify HEAD) && git diff-index -p --submodule=diff HEAD >actual && test_must_be_empty actual ' @@ -401,7 +413,7 @@ test_expect_success 'submodule contains untracked content' ' cat >expected <<-EOF && Submodule sm1 contains untracked content EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'submodule contains untracked content (untracked ignored)' ' @@ -433,7 +445,7 @@ test_expect_success 'submodule contains untracked and modified content' ' -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' # NOT OK @@ -450,7 +462,7 @@ test_expect_success 'submodule contains untracked and modified content (untracke -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'submodule contains untracked and modified content (dirty ignored)' ' @@ -478,7 +490,7 @@ test_expect_success 'submodule contains modified content' ' -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' (cd sm1; git commit -mchange foo6 >/dev/null) && @@ -486,7 +498,7 @@ head8=$(cd sm1; git rev-parse --short --verify HEAD) && test_expect_success 'submodule is modified' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9..$head8: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -495,7 +507,7 @@ test_expect_success 'submodule is modified' ' -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked content' ' @@ -503,7 +515,7 @@ test_expect_success 'modified submodule contains untracked content' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && Submodule sm1 contains untracked content - Submodule sm1 17243c9..$head8: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -512,13 +524,13 @@ test_expect_success 'modified submodule contains untracked content' ' -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked content (untracked ignored)' ' git diff-index -p --ignore-submodules=untracked --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9..$head8: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -527,13 +539,13 @@ test_expect_success 'modified submodule contains untracked content (untracked ig -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked content (dirty ignored)' ' git diff-index -p --ignore-submodules=dirty --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -542,7 +554,7 @@ test_expect_success 'modified submodule contains untracked content (dirty ignore -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked content (all ignored)' ' @@ -556,7 +568,7 @@ test_expect_success 'modified submodule contains untracked and modified content' cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 contains modified content - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..dfda541 100644 --- a/sm1/foo6 @@ -566,7 +578,7 @@ test_expect_success 'modified submodule contains untracked and modified content' +new +modification EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked and modified content (untracked ignored)' ' @@ -574,7 +586,7 @@ test_expect_success 'modified submodule contains untracked and modified content git diff-index -p --ignore-submodules=untracked --submodule=diff HEAD >actual && cat >expected <<-EOF && Submodule sm1 contains modified content - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..e20e2d9 100644 --- a/sm1/foo6 @@ -585,14 +597,14 @@ test_expect_success 'modified submodule contains untracked and modified content +modification +modification EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked and modified content (dirty ignored)' ' echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=dirty --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -601,7 +613,7 @@ test_expect_success 'modified submodule contains untracked and modified content -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked and modified content (all ignored)' ' @@ -616,7 +628,7 @@ test_expect_success 'modified submodule contains modified content' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && Submodule sm1 contains modified content - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..ac466ca 100644 --- a/sm1/foo6 @@ -629,29 +641,29 @@ test_expect_success 'modified submodule contains modified content' ' +modification +modification EOF - test_cmp expected actual + diff_cmp expected actual ' rm -rf sm1 test_expect_success 'deleted submodule' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9...0000000 (submodule deleted) + Submodule sm1 $head7...0000000 (submodule deleted) EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'create second submodule' ' test_create_repo sm2 && - head7=$(add_file sm2 foo8 foo9) && + head9=$(add_file sm2 foo8 foo9) && git add sm2 ' test_expect_success 'multiple submodules' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9...0000000 (submodule deleted) - Submodule sm2 0000000...a5a65c9 (new submodule) + Submodule sm1 $head7...0000000 (submodule deleted) + Submodule sm2 0000000...$head9 (new submodule) diff --git a/sm2/foo8 b/sm2/foo8 new file mode 100644 index 0000000..db9916b @@ -667,13 +679,13 @@ test_expect_success 'multiple submodules' ' @@ -0,0 +1 @@ +foo9 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'path filter' ' git diff-index -p --submodule=diff HEAD sm2 >actual && cat >expected <<-EOF && - Submodule sm2 0000000...a5a65c9 (new submodule) + Submodule sm2 0000000...$head9 (new submodule) diff --git a/sm2/foo8 b/sm2/foo8 new file mode 100644 index 0000000..db9916b @@ -689,15 +701,15 @@ test_expect_success 'path filter' ' @@ -0,0 +1 @@ +foo9 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm2 test_expect_success 'given commit' ' git diff-index -p --submodule=diff HEAD^ >actual && cat >expected <<-EOF && - Submodule sm1 17243c9...0000000 (submodule deleted) - Submodule sm2 0000000...a5a65c9 (new submodule) + Submodule sm1 $head7...0000000 (submodule deleted) + Submodule sm2 0000000...$head9 (new submodule) diff --git a/sm2/foo8 b/sm2/foo8 new file mode 100644 index 0000000..db9916b @@ -713,7 +725,7 @@ test_expect_success 'given commit' ' @@ -0,0 +1 @@ +foo9 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'setup .git file for sm2' ' @@ -726,8 +738,8 @@ test_expect_success 'setup .git file for sm2' ' test_expect_success 'diff --submodule=diff with .git file' ' git diff --submodule=diff HEAD^ >actual && cat >expected <<-EOF && - Submodule sm1 17243c9...0000000 (submodule deleted) - Submodule sm2 0000000...a5a65c9 (new submodule) + Submodule sm1 $head7...0000000 (submodule deleted) + Submodule sm2 0000000...$head9 (new submodule) diff --git a/sm2/foo8 b/sm2/foo8 new file mode 100644 index 0000000..db9916b @@ -743,25 +755,27 @@ test_expect_success 'diff --submodule=diff with .git file' ' @@ -0,0 +1 @@ +foo9 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'setup nested submodule' ' git submodule add -f ./sm2 && git commit -a -m "add sm2" && git -C sm2 submodule add ../sm2 nested && - git -C sm2 commit -a -m "nested sub" + git -C sm2 commit -a -m "nested sub" && + head10=$(git -C sm2 rev-parse --short --verify HEAD) ' test_expect_success 'move nested submodule HEAD' ' echo "nested content" >sm2/nested/file && git -C sm2/nested add file && - git -C sm2/nested commit --allow-empty -m "new HEAD" + git -C sm2/nested commit --allow-empty -m "new HEAD" && + head11=$(git -C sm2/nested rev-parse --short --verify HEAD) ' test_expect_success 'diff --submodule=diff with moved nested submodule HEAD' ' cat >expected <<-EOF && - Submodule nested a5a65c9..b55928c: + Submodule nested $head9..$head11: diff --git a/nested/file b/nested/file new file mode 100644 index 0000000..ca281f5 @@ -772,13 +786,13 @@ test_expect_success 'diff --submodule=diff with moved nested submodule HEAD' ' EOF git -C sm2 diff --submodule=diff >actual 2>err && test_must_be_empty err && - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'diff --submodule=diff recurses into nested submodules' ' cat >expected <<-EOF && Submodule sm2 contains modified content - Submodule sm2 a5a65c9..280969a: + Submodule sm2 $head9..$head10: diff --git a/sm2/.gitmodules b/sm2/.gitmodules new file mode 100644 index 0000000..3a816b8 @@ -788,7 +802,7 @@ test_expect_success 'diff --submodule=diff recurses into nested submodules' ' +[submodule "nested"] + path = nested + url = ../sm2 - Submodule nested 0000000...b55928c (new submodule) + Submodule nested 0000000...$head11 (new submodule) diff --git a/sm2/nested/file b/sm2/nested/file new file mode 100644 index 0000000..ca281f5 @@ -813,7 +827,7 @@ test_expect_success 'diff --submodule=diff recurses into nested submodules' ' EOF git diff --submodule=diff >actual 2>err && test_must_be_empty err && - test_cmp expected actual + diff_cmp expected actual ' test_done diff --git a/t/t4061-diff-indent.sh b/t/t4061-diff-indent.sh index 2affd7a100..0f7a6d97a8 100755 --- a/t/t4061-diff-indent.sh +++ b/t/t4061-diff-indent.sh @@ -17,7 +17,7 @@ compare_diff () { # Compare blame output using the expectation for a diff as reference. # Only look for the lines coming from non-boundary commits. compare_blame () { - sed -n -e "1,4d" -e "s/^\+//p" <"$1" >.tmp-1 + sed -n -e "1,4d" -e "s/^+//p" <"$1" >.tmp-1 sed -ne "s/^[^^][^)]*) *//p" <"$2" >.tmp-2 test_cmp .tmp-1 .tmp-2 && rm -f .tmp-1 .tmp-2 } diff --git a/t/t4066-diff-emit-delay.sh b/t/t4066-diff-emit-delay.sh index 5df6b5e64e..6331f63b12 100755 --- a/t/t4066-diff-emit-delay.sh +++ b/t/t4066-diff-emit-delay.sh @@ -18,7 +18,7 @@ test_expect_success 'set up history with a merge' ' ' test_expect_success 'log --cc -p --stat --color-moved' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && commit D --- D.t | 1 + @@ -26,7 +26,7 @@ test_expect_success 'log --cc -p --stat --color-moved' ' diff --git a/D.t b/D.t new file mode 100644 - index 0000000..1784810 + index 0000000..$(git rev-parse --short D:D.t) --- /dev/null +++ b/D.t @@ -0,0 +1 @@ @@ -42,7 +42,7 @@ test_expect_success 'log --cc -p --stat --color-moved' ' diff --git a/C.t b/C.t new file mode 100644 - index 0000000..3cc58df + index 0000000..$(git rev-parse --short C:C.t) --- /dev/null +++ b/C.t @@ -0,0 +1 @@ @@ -54,7 +54,7 @@ test_expect_success 'log --cc -p --stat --color-moved' ' diff --git a/B.t b/B.t new file mode 100644 - index 0000000..223b783 + index 0000000..$(git rev-parse --short B:B.t) --- /dev/null +++ b/B.t @@ -0,0 +1 @@ @@ -66,7 +66,7 @@ test_expect_success 'log --cc -p --stat --color-moved' ' diff --git a/A.t b/A.t new file mode 100644 - index 0000000..f70f10e + index 0000000..$(git rev-parse --short A:A.t) --- /dev/null +++ b/A.t @@ -0,0 +1 @@ diff --git a/t/t4067-diff-partial-clone.sh b/t/t4067-diff-partial-clone.sh index 4831ad35e6..ef8e0e9cb0 100755 --- a/t/t4067-diff-partial-clone.sh +++ b/t/t4067-diff-partial-clone.sh @@ -125,8 +125,56 @@ test_expect_success 'diff with rename detection batches blobs' ' # Ensure that there is exactly 1 negotiation by checking that there is # only 1 "done" line sent. ("done" marks the end of negotiation.) - GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff -M HEAD^ HEAD >out && - grep "similarity index" out && + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff --raw -M HEAD^ HEAD >out && + grep ":100644 100644.*R[0-9][0-9][0-9].*b.*c" out && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_expect_success 'diff does not fetch anything if inexact rename detection is not needed' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + printf "b\nb\nb\nb\nb\n" >server/b && + git -C server add a b && + git -C server commit -m x && + mv server/b server/c && + git -C server add c && + git -C server commit -a -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure no fetches. + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff --raw -M HEAD^ HEAD && + ! test_path_exists trace +' + +test_expect_success 'diff --break-rewrites fetches only if necessary, and batches blobs if it does' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + printf "b\nb\nb\nb\nb\n" >server/b && + git -C server add a b && + git -C server commit -m x && + printf "c\nc\nc\nc\nc\n" >server/b && + git -C server commit -a -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure no fetches. + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff --raw -M HEAD^ HEAD && + ! test_path_exists trace && + + # But with --break-rewrites, ensure that there is exactly 1 negotiation + # by checking that there is only 1 "done" line sent. ("done" marks the + # end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff --break-rewrites --raw -M HEAD^ HEAD && grep "git> done" trace >done_lines && test_line_count = 1 done_lines ' diff --git a/t/t4100/t-apply-1.patch b/t/t4100/t-apply-1.patch index 90ab54f0f5..43394f8285 100644 --- a/t/t4100/t-apply-1.patch +++ b/t/t4100/t-apply-1.patch @@ -75,8 +75,8 @@ diff --git a/Documentation/git.txt b/Documentation/git.txt +link:git-ssh-pull.html[git-ssh-pull]:: Pulls from a remote repository over ssh connection - Interogators: -@@ -156,8 +156,8 @@ Interogators: + Interrogators: +@@ -156,8 +156,8 @@ Interrogators: link:git-diff-helper.html[git-diff-helper]:: Generates patch format output for git-diff-* diff --git a/t/t4100/t-apply-3.patch b/t/t4100/t-apply-3.patch index 90cdbaa5bb..cac172e779 100644 --- a/t/t4100/t-apply-3.patch +++ b/t/t4100/t-apply-3.patch @@ -211,7 +211,7 @@ dissimilarity index 82% - - /* If this is an exact directory match, we may have - * directory files following this path. Match on them. -- * Otherwise, we're at a pach subcomponent, and we need +- * Otherwise, we're at a patch subcomponent, and we need - * to try to match again. - */ - if (mtype == 0) diff --git a/t/t4100/t-apply-5.patch b/t/t4100/t-apply-5.patch index 5f6ddc1059..57ec79d887 100644 --- a/t/t4100/t-apply-5.patch +++ b/t/t4100/t-apply-5.patch @@ -185,8 +185,8 @@ diff a/Documentation/git.txt b/Documentation/git.txt +link:git-ssh-pull.html[git-ssh-pull]:: Pulls from a remote repository over ssh connection - Interogators: -@@ -156,8 +156,8 @@ Interogators: + Interrogators: +@@ -156,8 +156,8 @@ Interrogators: link:git-diff-helper.html[git-diff-helper]:: Generates patch format output for git-diff-* diff --git a/t/t4100/t-apply-7.patch b/t/t4100/t-apply-7.patch index 07c6589e74..fa24305108 100644 --- a/t/t4100/t-apply-7.patch +++ b/t/t4100/t-apply-7.patch @@ -335,7 +335,7 @@ diff a/ls-tree.c b/ls-tree.c - /* If this is an exact directory match, we may have - * directory files following this path. Match on them. -- * Otherwise, we're at a pach subcomponent, and we need +- * Otherwise, we're at a patch subcomponent, and we need - * to try to match again. + if (e->directory) { + /* If this is a directory, we have the following cases: diff --git a/t/t4108-apply-threeway.sh b/t/t4108-apply-threeway.sh index fa5d4efb89..d7349ced6b 100755 --- a/t/t4108-apply-threeway.sh +++ b/t/t4108-apply-threeway.sh @@ -4,23 +4,17 @@ test_description='git apply --3way' . ./test-lib.sh -create_file () { - for i - do - echo "$i" - done -} - -sanitize_conflicted_diff () { +print_sanitized_conflicted_diff () { + git diff HEAD >diff.raw && sed -e ' /^index /d - s/^\(+[<>][<>][<>][<>]*\) .*/\1/ - ' + s/^\(+[<>|][<>|][<>|][<>|]*\) .*/\1/ + ' diff.raw } test_expect_success setup ' test_tick && - create_file >one 1 2 3 4 5 6 7 && + test_write_lines 1 2 3 4 5 6 7 >one && cat one >two && git add one two && git commit -m initial && @@ -28,13 +22,13 @@ test_expect_success setup ' git branch side && test_tick && - create_file >one 1 two 3 4 5 six 7 && - create_file >two 1 two 3 4 5 6 7 && + test_write_lines 1 two 3 4 5 six 7 >one && + test_write_lines 1 two 3 4 5 6 7 >two && git commit -a -m master && git checkout side && - create_file >one 1 2 3 4 five 6 7 && - create_file >two 1 2 3 4 five 6 7 && + test_write_lines 1 2 3 4 five 6 7 >one && + test_write_lines 1 2 3 4 five 6 7 >two && git commit -a -m side && git checkout master @@ -52,7 +46,7 @@ test_expect_success 'apply without --3way' ' git diff-index --exit-code --cached HEAD ' -test_expect_success 'apply with --3way' ' +test_apply_with_3way () { # Merging side should be similar to applying this patch git diff ...side >P.diff && @@ -61,22 +55,31 @@ test_expect_success 'apply with --3way' ' git checkout master^0 && test_must_fail git merge --no-commit side && git ls-files -s >expect.ls && - git diff HEAD | sanitize_conflicted_diff >expect.diff && + print_sanitized_conflicted_diff >expect.diff && # should fail to apply git reset --hard && git checkout master^0 && test_must_fail git apply --index --3way P.diff && git ls-files -s >actual.ls && - git diff HEAD | sanitize_conflicted_diff >actual.diff && + print_sanitized_conflicted_diff >actual.diff && # The result should resemble the corresponding merge test_cmp expect.ls actual.ls && test_cmp expect.diff actual.diff +} + +test_expect_success 'apply with --3way' ' + test_apply_with_3way +' + +test_expect_success 'apply with --3way with merge.conflictStyle = diff3' ' + test_config merge.conflictStyle diff3 && + test_apply_with_3way ' test_expect_success 'apply with --3way with rerere enabled' ' - git config rerere.enabled true && + test_config rerere.enabled true && # Merging side should be similar to applying this patch git diff ...side >P.diff && @@ -87,7 +90,7 @@ test_expect_success 'apply with --3way with rerere enabled' ' test_must_fail git merge --no-commit side && # Manually resolve and record the resolution - create_file 1 two 3 4 five six 7 >one && + test_write_lines 1 two 3 4 five six 7 >one && git rerere && cat one >expect && @@ -104,14 +107,14 @@ test_expect_success 'apply -3 with add/add conflict setup' ' git reset --hard && git checkout -b adder && - create_file 1 2 3 4 5 6 7 >three && - create_file 1 2 3 4 5 6 7 >four && + test_write_lines 1 2 3 4 5 6 7 >three && + test_write_lines 1 2 3 4 5 6 7 >four && git add three four && git commit -m "add three and four" && git checkout -b another adder^ && - create_file 1 2 3 4 5 6 7 >three && - create_file 1 2 3 four 5 6 7 >four && + test_write_lines 1 2 3 4 5 6 7 >three && + test_write_lines 1 2 3 four 5 6 7 >four && git add three four && git commit -m "add three and four" && @@ -121,7 +124,7 @@ test_expect_success 'apply -3 with add/add conflict setup' ' git checkout adder^0 && test_must_fail git merge --no-commit another && git ls-files -s >expect.ls && - git diff HEAD | sanitize_conflicted_diff >expect.diff + print_sanitized_conflicted_diff >expect.diff ' test_expect_success 'apply -3 with add/add conflict' ' @@ -131,7 +134,7 @@ test_expect_success 'apply -3 with add/add conflict' ' test_must_fail git apply --index --3way P.diff && # ... and leave conflicts in the index and in the working tree git ls-files -s >actual.ls && - git diff HEAD | sanitize_conflicted_diff >actual.diff && + print_sanitized_conflicted_diff >actual.diff && # The result should resemble the corresponding merge test_cmp expect.ls actual.ls && diff --git a/t/t4117-apply-reject.sh b/t/t4117-apply-reject.sh index f7de6f077a..0ee93fe845 100755 --- a/t/t4117-apply-reject.sh +++ b/t/t4117-apply-reject.sh @@ -74,7 +74,7 @@ test_expect_success 'apply with --reject should fail but update the file' ' test_must_fail git apply --reject patch.1 && test_cmp expected file1 && - cat file1.rej && + test_path_is_file file1.rej && test_path_is_missing file2.rej ' @@ -87,7 +87,7 @@ test_expect_success 'apply with --reject should fail but update the file' ' test_path_is_missing file1 && test_cmp expected file2 && - cat file2.rej && + test_path_is_file file2.rej && test_path_is_missing file1.rej ' @@ -101,7 +101,7 @@ test_expect_success 'the same test with --verbose' ' test_path_is_missing file1 && test_cmp expected file2 && - cat file2.rej && + test_path_is_file file2.rej && test_path_is_missing file1.rej ' diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index ff51e9e789..0ca29821ec 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -35,9 +35,15 @@ prepare_test_file () { } apply_patch () { + cmd_prefix= && + if test "x$1" = 'x!' + then + cmd_prefix=test_must_fail && + shift + fi && >target && sed -e "s|\([ab]\)/file|\1/target|" <patch | - git apply "$@" + $cmd_prefix git apply "$@" } test_fix () { @@ -46,6 +52,13 @@ test_fix () { # find touched lines $DIFF file target | sed -n -e "s/^> //p" >fixed + # busybox's diff(1) doesn't output normal format + if ! test -s fixed + then + $DIFF -u file target | + grep -v '^+++ target' | + sed -ne "/^+/s/+//p" >fixed + fi # the changed lines are all expected to change fixed_cnt=$(wc -l <fixed) @@ -99,7 +112,7 @@ test_expect_success 'whitespace=warn, default rule' ' test_expect_success 'whitespace=error-all, default rule' ' - test_must_fail apply_patch --whitespace=error-all && + apply_patch ! --whitespace=error-all && test_must_be_empty target ' diff --git a/t/t4134-apply-submodule.sh b/t/t4134-apply-submodule.sh index 0043930ca6..99ed4cc546 100755 --- a/t/t4134-apply-submodule.sh +++ b/t/t4134-apply-submodule.sh @@ -8,6 +8,7 @@ test_description='git apply submodule tests' . ./test-lib.sh test_expect_success setup ' + test_oid_init && cat > create-sm.patch <<EOF && diff --git a/dir/sm b/dir/sm new file mode 160000 @@ -15,7 +16,7 @@ index 0000000..0123456 --- /dev/null +++ b/dir/sm @@ -0,0 +1 @@ -+Subproject commit 0123456789abcdef0123456789abcdef01234567 ++Subproject commit $(test_oid numeric) EOF cat > remove-sm.patch <<EOF diff --git a/dir/sm b/dir/sm @@ -24,7 +25,7 @@ index 0123456..0000000 --- a/dir/sm +++ /dev/null @@ -1 +0,0 @@ --Subproject commit 0123456789abcdef0123456789abcdef01234567 +-Subproject commit $(test_oid numeric) EOF ' diff --git a/t/t4138-apply-ws-expansion.sh b/t/t4138-apply-ws-expansion.sh index 3b636a63a3..b19faeb67a 100755 --- a/t/t4138-apply-ws-expansion.sh +++ b/t/t4138-apply-ws-expansion.sh @@ -17,8 +17,8 @@ test_expect_success setup ' printf "\t%s\n" 1 2 3 >after && printf "%64s\n" a b c >>after && printf "\t%s\n" 4 5 6 >>after && - git diff --no-index before after | - sed -e "s/before/test-1/" -e "s/after/test-1/" >patch1.patch && + test_expect_code 1 git diff --no-index before after >patch1.patch.raw && + sed -e "s/before/test-1/" -e "s/after/test-1/" patch1.patch.raw >patch1.patch && printf "%64s\n" 1 2 3 4 5 6 >test-1 && printf "%64s\n" 1 2 3 a b c 4 5 6 >expect-1 && @@ -33,8 +33,8 @@ test_expect_success setup ' x=$(( $x + 1 )) done && printf "\t%s\n" d e f >>after && - git diff --no-index before after | - sed -e "s/before/test-2/" -e "s/after/test-2/" >patch2.patch && + test_expect_code 1 git diff --no-index before after >patch2.patch.raw && + sed -e "s/before/test-2/" -e "s/after/test-2/" patch2.patch.raw >patch2.patch && printf "%64s\n" a b c d e f >test-2 && printf "%64s\n" a b c >expect-2 && x=1 && @@ -56,8 +56,8 @@ test_expect_success setup ' x=$(( $x + 1 )) done && printf "\t%s\n" d e f >>after && - git diff --no-index before after | - sed -e "s/before/test-3/" -e "s/after/test-3/" >patch3.patch && + test_expect_code 1 git diff --no-index before after >patch3.patch.raw && + sed -e "s/before/test-3/" -e "s/after/test-3/" patch3.patch.raw >patch3.patch && printf "%64s\n" a b c d e f >test-3 && printf "%64s\n" a b c >expect-3 && x=0 && @@ -84,8 +84,8 @@ test_expect_success setup ' printf "\t%02d\n" $x >>after x=$(( $x + 1 )) done && - git diff --no-index before after | - sed -e "s/before/test-4/" -e "s/after/test-4/" >patch4.patch && + test_expect_code 1 git diff --no-index before after >patch4.patch.raw && + sed -e "s/before/test-4/" -e "s/after/test-4/" patch4.patch.raw >patch4.patch && >test-4 && x=0 && while test $x -lt 50 diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 4f1e24ecbe..bda4586a79 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -166,7 +166,7 @@ test_expect_success setup ' test_tick && git commit -m third && - git format-patch --stdout first >patch2 && + git format-patch --stdout first >patch2 && git checkout -b lorem && sed -n -e "11,\$p" msg >file && @@ -666,6 +666,26 @@ test_expect_success 'am --show-current-patch' ' test_cmp .git/rebase-apply/0001 actual.patch ' +test_expect_success 'am --show-current-patch=raw' ' + git am --show-current-patch=raw >actual.patch && + test_cmp .git/rebase-apply/0001 actual.patch +' + +test_expect_success 'am --show-current-patch=diff' ' + git am --show-current-patch=diff >actual.patch && + test_cmp .git/rebase-apply/patch actual.patch +' + +test_expect_success 'am accepts repeated --show-current-patch' ' + git am --show-current-patch --show-current-patch=raw >actual.patch && + test_cmp .git/rebase-apply/0001 actual.patch +' + +test_expect_success 'am detects incompatible --show-current-patch' ' + test_must_fail git am --show-current-patch=raw --show-current-patch=diff && + test_must_fail git am --show-current-patch --show-current-patch=diff +' + test_expect_success 'am --skip works' ' echo goodbye >expected && git am --skip && diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh index 55b7750ade..831d424c47 100755 --- a/t/t4200-rerere.sh +++ b/t/t4200-rerere.sh @@ -25,6 +25,7 @@ test_description='git rerere . ./test-lib.sh test_expect_success 'setup' ' + test_oid_init && cat >a1 <<-\EOF && Some title ========== @@ -210,7 +211,7 @@ test_expect_success 'set up for garbage collection tests' ' echo Hello >$rr/preimage && echo World >$rr/postimage && - sha2=4000000000000000000000000000000000000000 && + sha2=$(test_oid deadbeef) && rr2=.git/rr-cache/$sha2 && mkdir $rr2 && echo Hello >$rr2/preimage && diff --git a/t/t4202-log.sh b/t/t4202-log.sh index e803ba402e..a0930599aa 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -5,6 +5,11 @@ test_description='git log' . ./test-lib.sh . "$TEST_DIRECTORY/lib-gpg.sh" . "$TEST_DIRECTORY/lib-terminal.sh" +. "$TEST_DIRECTORY/lib-log-graph.sh" + +test_cmp_graph () { + lib_test_cmp_graph --format=%s "$@" +} test_expect_success setup ' @@ -87,12 +92,12 @@ test_expect_success 'format %w(,1,2)' ' ' cat > expect << EOF -804a787 sixth -394ef78 fifth -5d31159 fourth -2fbe8c0 third -f7dab8e second -3a2fdcb initial +$(git rev-parse --short :/sixth ) sixth +$(git rev-parse --short :/fifth ) fifth +$(git rev-parse --short :/fourth ) fourth +$(git rev-parse --short :/third ) third +$(git rev-parse --short :/second ) second +$(git rev-parse --short :/initial) initial EOF test_expect_success 'oneline' ' @@ -173,43 +178,45 @@ test_expect_success 'git config log.follow is overridden by --no-follow' ' verbose test "$actual" = "$expect" ' +# Note that these commits are intentionally listed out of order. +last_three="$(git rev-parse :/fourth :/sixth :/fifth)" cat > expect << EOF -804a787 sixth -394ef78 fifth -5d31159 fourth +$(git rev-parse --short :/sixth ) sixth +$(git rev-parse --short :/fifth ) fifth +$(git rev-parse --short :/fourth) fourth EOF test_expect_success 'git log --no-walk <commits> sorts by commit time' ' - git log --no-walk --oneline 5d31159 804a787 394ef78 > actual && + git log --no-walk --oneline $last_three > actual && test_cmp expect actual ' test_expect_success 'git log --no-walk=sorted <commits> sorts by commit time' ' - git log --no-walk=sorted --oneline 5d31159 804a787 394ef78 > actual && + git log --no-walk=sorted --oneline $last_three > actual && test_cmp expect actual ' cat > expect << EOF -=== 804a787 sixth -=== 394ef78 fifth -=== 5d31159 fourth +=== $(git rev-parse --short :/sixth ) sixth +=== $(git rev-parse --short :/fifth ) fifth +=== $(git rev-parse --short :/fourth) fourth EOF test_expect_success 'git log --line-prefix="=== " --no-walk <commits> sorts by commit time' ' - git log --line-prefix="=== " --no-walk --oneline 5d31159 804a787 394ef78 > actual && + git log --line-prefix="=== " --no-walk --oneline $last_three > actual && test_cmp expect actual ' cat > expect << EOF -5d31159 fourth -804a787 sixth -394ef78 fifth +$(git rev-parse --short :/fourth) fourth +$(git rev-parse --short :/sixth ) sixth +$(git rev-parse --short :/fifth ) fifth EOF test_expect_success 'git log --no-walk=unsorted <commits> leaves list of commits as given' ' - git log --no-walk=unsorted --oneline 5d31159 804a787 394ef78 > actual && + git log --no-walk=unsorted --oneline $last_three > actual && test_cmp expect actual ' test_expect_success 'git show <commits> leaves list of commits as given' ' - git show --oneline -s 5d31159 804a787 394ef78 > actual && + git show --oneline -s $last_three > actual && test_cmp expect actual ' @@ -450,8 +457,7 @@ cat > expect <<EOF EOF test_expect_success 'simple log --graph' ' - git log --graph --pretty=tformat:%s >actual && - test_cmp expect actual + test_cmp_graph ' cat > expect <<EOF @@ -465,8 +471,7 @@ cat > expect <<EOF EOF test_expect_success 'simple log --graph --line-prefix="123 "' ' - git log --graph --line-prefix="123 " --pretty=tformat:%s >actual && - test_cmp expect actual + test_cmp_graph --line-prefix="123 " ' test_expect_success 'set up merge history' ' @@ -493,9 +498,7 @@ cat > expect <<\EOF EOF test_expect_success 'log --graph with merge' ' - git log --graph --date-order --pretty=tformat:%s | - sed "s/ *\$//" >actual && - test_cmp expect actual + test_cmp_graph --date-order ' cat > expect <<\EOF @@ -514,9 +517,7 @@ cat > expect <<\EOF EOF test_expect_success 'log --graph --line-prefix="| | | " with merge' ' - git log --line-prefix="| | | " --graph --date-order --pretty=tformat:%s | - sed "s/ *\$//" >actual && - test_cmp expect actual + test_cmp_graph --line-prefix="| | | " --date-order ' cat > expect.colors <<\EOF @@ -536,9 +537,7 @@ EOF test_expect_success 'log --graph with merge with log.graphColors' ' test_config log.graphColors " blue,invalid-color, cyan, red , " && - git log --color=always --graph --date-order --pretty=tformat:%s | - test_decode_color | sed "s/ *\$//" >actual && - test_cmp expect.colors actual + lib_test_cmp_colored_graph --date-order --format=%s ' test_expect_success 'log --raw --graph -m with merge' ' @@ -667,16 +666,14 @@ cat > expect <<\EOF * | | fifth * | | fourth |/ / -* | third +* / third |/ * second * initial EOF test_expect_success 'log --graph with merge' ' - git log --graph --date-order --pretty=tformat:%s | - sed "s/ *\$//" >actual && - test_cmp expect actual + test_cmp_graph --date-order ' test_expect_success 'log.decorate configuration' ' @@ -745,8 +742,24 @@ test_expect_success 'decorate-refs with glob' ' octopus-a (octopus-a) reach EOF + cat >expect.no-decorate <<-\EOF && + Merge-tag-reach + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b + octopus-a + reach + EOF git log -n6 --decorate=short --pretty="tformat:%f%d" \ --decorate-refs="heads/octopus*" >actual && + test_cmp expect.decorate actual && + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs-exclude="heads/octopus*" \ + --decorate-refs="heads/octopus*" >actual && + test_cmp expect.no-decorate actual && + git -c log.excludeDecoration="heads/octopus*" log \ + -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs="heads/octopus*" >actual && test_cmp expect.decorate actual ' @@ -790,6 +803,9 @@ test_expect_success 'decorate-refs-exclude with glob' ' EOF git log -n6 --decorate=short --pretty="tformat:%f%d" \ --decorate-refs-exclude="heads/octopus*" >actual && + test_cmp expect.decorate actual && + git -c log.excludeDecoration="heads/octopus*" log \ + -n6 --decorate=short --pretty="tformat:%f%d" >actual && test_cmp expect.decorate actual ' @@ -804,6 +820,9 @@ test_expect_success 'decorate-refs-exclude without globs' ' EOF git log -n6 --decorate=short --pretty="tformat:%f%d" \ --decorate-refs-exclude="tags/reach" >actual && + test_cmp expect.decorate actual && + git -c log.excludeDecoration="tags/reach" log \ + -n6 --decorate=short --pretty="tformat:%f%d" >actual && test_cmp expect.decorate actual ' @@ -819,11 +838,19 @@ test_expect_success 'multiple decorate-refs-exclude' ' git log -n6 --decorate=short --pretty="tformat:%f%d" \ --decorate-refs-exclude="heads/octopus*" \ --decorate-refs-exclude="tags/reach" >actual && + test_cmp expect.decorate actual && + git -c log.excludeDecoration="heads/octopus*" \ + -c log.excludeDecoration="tags/reach" log \ + -n6 --decorate=short --pretty="tformat:%f%d" >actual && + test_cmp expect.decorate actual && + git -c log.excludeDecoration="heads/octopus*" log \ + --decorate-refs-exclude="tags/reach" \ + -n6 --decorate=short --pretty="tformat:%f%d" >actual && test_cmp expect.decorate actual ' test_expect_success 'decorate-refs and decorate-refs-exclude' ' - cat >expect.decorate <<-\EOF && + cat >expect.no-decorate <<-\EOF && Merge-tag-reach (master) Merge-tags-octopus-a-and-octopus-b seventh @@ -834,6 +861,21 @@ test_expect_success 'decorate-refs and decorate-refs-exclude' ' git log -n6 --decorate=short --pretty="tformat:%f%d" \ --decorate-refs="heads/*" \ --decorate-refs-exclude="heads/oc*" >actual && + test_cmp expect.no-decorate actual +' + +test_expect_success 'deocrate-refs and log.excludeDecoration' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (master) + Merge-tags-octopus-a-and-octopus-b + seventh + octopus-b (octopus-b) + octopus-a (octopus-a) + reach (reach) + EOF + git -c log.excludeDecoration="heads/oc*" log \ + --decorate-refs="heads/*" \ + -n6 --decorate=short --pretty="tformat:%f%d" >actual && test_cmp expect.decorate actual ' @@ -849,6 +891,10 @@ test_expect_success 'decorate-refs-exclude and simplify-by-decoration' ' git log -n6 --decorate=short --pretty="tformat:%f%d" \ --decorate-refs-exclude="*octopus*" \ --simplify-by-decoration >actual && + test_cmp expect.decorate actual && + git -c log.excludeDecoration="*octopus*" log \ + -n6 --decorate=short --pretty="tformat:%f%d" \ + --simplify-by-decoration >actual && test_cmp expect.decorate actual ' @@ -957,7 +1003,7 @@ cat >expect <<\EOF | | | | diff --git a/reach.t b/reach.t | | new file mode 100644 -| | index 0000000..10c9591 +| | index BEFORE..AFTER | | --- /dev/null | | +++ b/reach.t | | @@ -0,0 +1 @@ @@ -980,7 +1026,7 @@ cat >expect <<\EOF | | | | | | diff --git a/octopus-b.t b/octopus-b.t | | | new file mode 100644 -| | | index 0000000..d5fcad0 +| | | index BEFORE..AFTER | | | --- /dev/null | | | +++ b/octopus-b.t | | | @@ -0,0 +1 @@ @@ -996,7 +1042,7 @@ cat >expect <<\EOF | | | | diff --git a/octopus-a.t b/octopus-a.t | | new file mode 100644 -| | index 0000000..11ee015 +| | index BEFORE..AFTER | | --- /dev/null | | +++ b/octopus-a.t | | @@ -0,0 +1 @@ @@ -1012,7 +1058,7 @@ cat >expect <<\EOF | | diff --git a/seventh.t b/seventh.t | new file mode 100644 -| index 0000000..9744ffc +| index BEFORE..AFTER | --- /dev/null | +++ b/seventh.t | @@ -0,0 +1 @@ @@ -1046,7 +1092,7 @@ cat >expect <<\EOF | | | | | | | | diff --git a/tangle-a b/tangle-a | | | | new file mode 100644 -| | | | index 0000000..7898192 +| | | | index BEFORE..AFTER | | | | --- /dev/null | | | | +++ b/tangle-a | | | | @@ -0,0 +1 @@ @@ -1068,7 +1114,7 @@ cat >expect <<\EOF | | | | | | | | diff --git a/2 b/2 | | | | new file mode 100644 -| | | | index 0000000..0cfbf08 +| | | | index BEFORE..AFTER | | | | --- /dev/null | | | | +++ b/2 | | | | @@ -0,0 +1 @@ @@ -1084,7 +1130,7 @@ cat >expect <<\EOF | | | | | | | | diff --git a/1 b/1 | | | | new file mode 100644 -| | | | index 0000000..d00491f +| | | | index BEFORE..AFTER | | | | --- /dev/null | | | | +++ b/1 | | | | @@ -0,0 +1 @@ @@ -1100,7 +1146,7 @@ cat >expect <<\EOF | | | | | | | | diff --git a/one b/one | | | | new file mode 100644 -| | | | index 0000000..9a33383 +| | | | index BEFORE..AFTER | | | | --- /dev/null | | | | +++ b/one | | | | @@ -0,0 +1 @@ @@ -1116,7 +1162,7 @@ cat >expect <<\EOF | | | | | | diff --git a/a/two b/a/two | | | deleted file mode 100644 -| | | index 9245af5..0000000 +| | | index BEFORE..AFTER | | | --- a/a/two | | | +++ /dev/null | | | @@ -1 +0,0 @@ @@ -1132,7 +1178,7 @@ cat >expect <<\EOF | | | | | | diff --git a/a/two b/a/two | | | new file mode 100644 -| | | index 0000000..9245af5 +| | | index BEFORE..AFTER | | | --- /dev/null | | | +++ b/a/two | | | @@ -0,0 +1 @@ @@ -1148,7 +1194,7 @@ cat >expect <<\EOF | | | | diff --git a/ein b/ein | | new file mode 100644 -| | index 0000000..9d7e69f +| | index BEFORE..AFTER | | --- /dev/null | | +++ b/ein | | @@ -0,0 +1 @@ @@ -1165,14 +1211,14 @@ cat >expect <<\EOF | | diff --git a/ichi b/ichi | new file mode 100644 -| index 0000000..9d7e69f +| index BEFORE..AFTER | --- /dev/null | +++ b/ichi | @@ -0,0 +1 @@ | +ichi | diff --git a/one b/one | deleted file mode 100644 -| index 9d7e69f..0000000 +| index BEFORE..AFTER | --- a/one | +++ /dev/null | @@ -1 +0,0 @@ @@ -1187,7 +1233,7 @@ cat >expect <<\EOF | 1 file changed, 1 insertion(+), 1 deletion(-) | | diff --git a/one b/one -| index 5626abf..9d7e69f 100644 +| index BEFORE..AFTER 100644 | --- a/one | +++ b/one | @@ -1 +1 @@ @@ -1204,30 +1250,15 @@ cat >expect <<\EOF diff --git a/one b/one new file mode 100644 - index 0000000..5626abf + index BEFORE..AFTER --- /dev/null +++ b/one @@ -0,0 +1 @@ +one EOF -sanitize_output () { - sed -e 's/ *$//' \ - -e 's/commit [0-9a-f]*$/commit COMMIT_OBJECT_NAME/' \ - -e 's/Merge: [ 0-9a-f]*$/Merge: MERGE_PARENTS/' \ - -e 's/Merge tag.*/Merge HEADS DESCRIPTION/' \ - -e 's/Merge commit.*/Merge HEADS DESCRIPTION/' \ - -e 's/, 0 deletions(-)//' \ - -e 's/, 0 insertions(+)//' \ - -e 's/ 1 files changed, / 1 file changed, /' \ - -e 's/, 1 deletions(-)/, 1 deletion(-)/' \ - -e 's/, 1 insertions(+)/, 1 insertion(+)/' -} - test_expect_success 'log --graph with diff and stats' ' - git log --no-renames --graph --pretty=short --stat -p >actual && - sanitize_output >actual.sanitized <actual && - test_i18ncmp expect actual.sanitized + lib_test_cmp_short_graph --no-renames --stat -p ' cat >expect <<\EOF @@ -1247,7 +1278,7 @@ cat >expect <<\EOF *** | | *** | | diff --git a/reach.t b/reach.t *** | | new file mode 100644 -*** | | index 0000000..10c9591 +*** | | index BEFORE..AFTER *** | | --- /dev/null *** | | +++ b/reach.t *** | | @@ -0,0 +1 @@ @@ -1270,7 +1301,7 @@ cat >expect <<\EOF *** | | | *** | | | diff --git a/octopus-b.t b/octopus-b.t *** | | | new file mode 100644 -*** | | | index 0000000..d5fcad0 +*** | | | index BEFORE..AFTER *** | | | --- /dev/null *** | | | +++ b/octopus-b.t *** | | | @@ -0,0 +1 @@ @@ -1286,7 +1317,7 @@ cat >expect <<\EOF *** | | *** | | diff --git a/octopus-a.t b/octopus-a.t *** | | new file mode 100644 -*** | | index 0000000..11ee015 +*** | | index BEFORE..AFTER *** | | --- /dev/null *** | | +++ b/octopus-a.t *** | | @@ -0,0 +1 @@ @@ -1302,7 +1333,7 @@ cat >expect <<\EOF *** | *** | diff --git a/seventh.t b/seventh.t *** | new file mode 100644 -*** | index 0000000..9744ffc +*** | index BEFORE..AFTER *** | --- /dev/null *** | +++ b/seventh.t *** | @@ -0,0 +1 @@ @@ -1336,7 +1367,7 @@ cat >expect <<\EOF *** | | | | *** | | | | diff --git a/tangle-a b/tangle-a *** | | | | new file mode 100644 -*** | | | | index 0000000..7898192 +*** | | | | index BEFORE..AFTER *** | | | | --- /dev/null *** | | | | +++ b/tangle-a *** | | | | @@ -0,0 +1 @@ @@ -1358,7 +1389,7 @@ cat >expect <<\EOF *** | | | | *** | | | | diff --git a/2 b/2 *** | | | | new file mode 100644 -*** | | | | index 0000000..0cfbf08 +*** | | | | index BEFORE..AFTER *** | | | | --- /dev/null *** | | | | +++ b/2 *** | | | | @@ -0,0 +1 @@ @@ -1374,7 +1405,7 @@ cat >expect <<\EOF *** | | | | *** | | | | diff --git a/1 b/1 *** | | | | new file mode 100644 -*** | | | | index 0000000..d00491f +*** | | | | index BEFORE..AFTER *** | | | | --- /dev/null *** | | | | +++ b/1 *** | | | | @@ -0,0 +1 @@ @@ -1390,7 +1421,7 @@ cat >expect <<\EOF *** | | | | *** | | | | diff --git a/one b/one *** | | | | new file mode 100644 -*** | | | | index 0000000..9a33383 +*** | | | | index BEFORE..AFTER *** | | | | --- /dev/null *** | | | | +++ b/one *** | | | | @@ -0,0 +1 @@ @@ -1406,7 +1437,7 @@ cat >expect <<\EOF *** | | | *** | | | diff --git a/a/two b/a/two *** | | | deleted file mode 100644 -*** | | | index 9245af5..0000000 +*** | | | index BEFORE..AFTER *** | | | --- a/a/two *** | | | +++ /dev/null *** | | | @@ -1 +0,0 @@ @@ -1422,7 +1453,7 @@ cat >expect <<\EOF *** | | | *** | | | diff --git a/a/two b/a/two *** | | | new file mode 100644 -*** | | | index 0000000..9245af5 +*** | | | index BEFORE..AFTER *** | | | --- /dev/null *** | | | +++ b/a/two *** | | | @@ -0,0 +1 @@ @@ -1438,7 +1469,7 @@ cat >expect <<\EOF *** | | *** | | diff --git a/ein b/ein *** | | new file mode 100644 -*** | | index 0000000..9d7e69f +*** | | index BEFORE..AFTER *** | | --- /dev/null *** | | +++ b/ein *** | | @@ -0,0 +1 @@ @@ -1455,14 +1486,14 @@ cat >expect <<\EOF *** | *** | diff --git a/ichi b/ichi *** | new file mode 100644 -*** | index 0000000..9d7e69f +*** | index BEFORE..AFTER *** | --- /dev/null *** | +++ b/ichi *** | @@ -0,0 +1 @@ *** | +ichi *** | diff --git a/one b/one *** | deleted file mode 100644 -*** | index 9d7e69f..0000000 +*** | index BEFORE..AFTER *** | --- a/one *** | +++ /dev/null *** | @@ -1 +0,0 @@ @@ -1477,7 +1508,7 @@ cat >expect <<\EOF *** | 1 file changed, 1 insertion(+), 1 deletion(-) *** | *** | diff --git a/one b/one -*** | index 5626abf..9d7e69f 100644 +*** | index BEFORE..AFTER 100644 *** | --- a/one *** | +++ b/one *** | @@ -1 +1 @@ @@ -1494,7 +1525,7 @@ cat >expect <<\EOF *** *** diff --git a/one b/one *** new file mode 100644 -*** index 0000000..5626abf +*** index BEFORE..AFTER *** --- /dev/null *** +++ b/one *** @@ -0,0 +1 @@ @@ -1502,9 +1533,7 @@ cat >expect <<\EOF EOF test_expect_success 'log --line-prefix="*** " --graph with diff and stats' ' - git log --line-prefix="*** " --no-renames --graph --pretty=short --stat -p >actual && - sanitize_output >actual.sanitized <actual && - test_i18ncmp expect actual.sanitized + lib_test_cmp_short_graph --line-prefix="*** " --no-renames --stat -p ' cat >expect <<-\EOF @@ -1526,9 +1555,7 @@ cat >expect <<-\EOF EOF test_expect_success 'log --graph with --name-status' ' - git log --graph --format=%s --name-status tangle..reach >actual && - sanitize_output <actual >actual.sanitized && - test_cmp expect actual.sanitized + test_cmp_graph --name-status tangle..reach ' cat >expect <<-\EOF @@ -1550,9 +1577,7 @@ cat >expect <<-\EOF EOF test_expect_success 'log --graph with --name-only' ' - git log --graph --format=%s --name-only tangle..reach >actual && - sanitize_output <actual >actual.sanitized && - test_cmp expect actual.sanitized + test_cmp_graph --name-only tangle..reach ' test_expect_success 'dotdot is a parent directory' ' @@ -1570,6 +1595,14 @@ test_expect_success GPG 'setup signed branch' ' git commit -S -m signed_commit ' +test_expect_success GPG 'setup signed branch with subkey' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b signed-subkey master && + echo foo >foo && + git add foo && + git commit -SB7227189 -m signed_commit +' + test_expect_success GPGSM 'setup signed branch x509' ' test_when_finished "git reset --hard && git checkout master" && git checkout -b signed-x509 master && @@ -1580,6 +1613,18 @@ test_expect_success GPGSM 'setup signed branch x509' ' git commit -S -m signed_commit ' +test_expect_success GPGSM 'log x509 fingerprint' ' + echo "F8BF62E0693D0694816377099909C779FA23FD65 | " >expect && + git log -n1 --format="%GF | %GP" signed-x509 >actual && + test_cmp expect actual +' + +test_expect_success GPGSM 'log OpenPGP fingerprint' ' + echo "D4BE22311AD3131E5EDA29A461092E85B7227189" > expect && + git log -n1 --format="%GP" signed-subkey >actual && + test_cmp expect actual +' + test_expect_success GPG 'log --graph --show-signature' ' git log --graph --show-signature -n1 signed >actual && grep "^| gpg: Signature made" actual && @@ -1611,6 +1656,86 @@ test_expect_success GPG 'log --graph --show-signature for merged tag' ' grep "^| | gpg: Good signature" actual ' +test_expect_success GPG 'log --graph --show-signature for merged tag in shallow clone' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b plain-shallow master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout --detach master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_shallow && + hash=$(git rev-parse HEAD) && + git checkout plain-shallow && + git merge --no-ff -m msg signed_tag_shallow && + git clone --depth 1 --no-local . shallow && + test_when_finished "rm -rf shallow" && + git -C shallow log --graph --show-signature -n1 plain-shallow >actual && + grep "tag signed_tag_shallow names a non-parent $hash" actual +' + +test_expect_success GPG 'log --graph --show-signature for merged tag with missing key' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b plain-nokey master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-nokey master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_nokey && + git checkout plain-nokey && + git merge --no-ff -m msg signed_tag_nokey && + GNUPGHOME=. git log --graph --show-signature -n1 plain-nokey >actual && + grep "^|\\\ merged tag" actual && + grep "^| | gpg: Signature made" actual && + grep -E "^| | gpg: Can'"'"'t check signature: (public key not found|No public key)" actual +' + +test_expect_success GPG 'log --graph --show-signature for merged tag with bad signature' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b plain-bad master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-bad master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_bad && + git cat-file tag signed_tag_bad >raw && + sed -e "s/signed_tag_msg/forged/" raw >forged && + git hash-object -w -t tag forged >forged.tag && + git checkout plain-bad && + git merge --no-ff -m msg "$(cat forged.tag)" && + git log --graph --show-signature -n1 plain-bad >actual && + grep "^|\\\ merged tag" actual && + grep "^| | gpg: Signature made" actual && + grep "^| | gpg: BAD signature from" actual +' + +test_expect_success GPG 'log --show-signature for merged tag with GPG failure' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b plain-fail master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-fail master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_fail && + git checkout plain-fail && + git merge --no-ff -m msg signed_tag_fail && + TMPDIR="$(pwd)/bogus" git log --show-signature -n1 plain-fail >actual && + grep "^merged tag" actual && + grep "^No signature" actual && + ! grep "^gpg: Signature made" actual +' + test_expect_success GPGSM 'log --graph --show-signature for merged tag x509' ' test_when_finished "git reset --hard && git checkout master" && test_config gpg.format x509 && @@ -1632,6 +1757,51 @@ test_expect_success GPGSM 'log --graph --show-signature for merged tag x509' ' grep "^| | gpgsm: Good signature" actual ' +test_expect_success GPGSM 'log --graph --show-signature for merged tag x509 missing key' ' + test_when_finished "git reset --hard && git checkout master" && + test_config gpg.format x509 && + test_config user.signingkey $GIT_COMMITTER_EMAIL && + git checkout -b plain-x509-nokey master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-x509-nokey master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_x509_nokey && + git checkout plain-x509-nokey && + git merge --no-ff -m msg signed_tag_x509_nokey && + GNUPGHOME=. git log --graph --show-signature -n1 plain-x509-nokey >actual && + grep "^|\\\ merged tag" actual && + grep "^| | gpgsm: certificate not found" actual +' + +test_expect_success GPGSM 'log --graph --show-signature for merged tag x509 bad signature' ' + test_when_finished "git reset --hard && git checkout master" && + test_config gpg.format x509 && + test_config user.signingkey $GIT_COMMITTER_EMAIL && + git checkout -b plain-x509-bad master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout -b tagged-x509-bad master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_x509_bad && + git cat-file tag signed_tag_x509_bad >raw && + sed -e "s/signed_tag_msg/forged/" raw >forged && + git hash-object -w -t tag forged >forged.tag && + git checkout plain-x509-bad && + git merge --no-ff -m msg "$(cat forged.tag)" && + git log --graph --show-signature -n1 plain-x509-bad >actual && + grep "^|\\\ merged tag" actual && + grep "^| | gpgsm: Signature made" actual && + grep "^| | gpgsm: invalid signature" actual +' + + test_expect_success GPG '--no-show-signature overrides --show-signature' ' git log -1 --show-signature --no-show-signature signed >actual && ! grep "^gpg:" actual @@ -1689,10 +1859,10 @@ test_expect_success 'set up --source tests' ' ' test_expect_success 'log --source paints branch names' ' - cat >expect <<-\EOF && - 09e12a9 source-b three - 8e393e1 source-a two - 1ac6c77 source-b one + cat >expect <<-EOF && + $(git rev-parse --short :/three) source-b three + $(git rev-parse --short :/two ) source-a two + $(git rev-parse --short :/one ) source-b one EOF git log --oneline --source source-a source-b >actual && test_cmp expect actual @@ -1700,19 +1870,19 @@ test_expect_success 'log --source paints branch names' ' test_expect_success 'log --source paints tag names' ' git tag -m tagged source-tag && - cat >expect <<-\EOF && - 09e12a9 source-tag three - 8e393e1 source-a two - 1ac6c77 source-tag one + cat >expect <<-EOF && + $(git rev-parse --short :/three) source-tag three + $(git rev-parse --short :/two ) source-a two + $(git rev-parse --short :/one ) source-tag one EOF git log --oneline --source source-tag source-a >actual && test_cmp expect actual ' test_expect_success 'log --source paints symmetric ranges' ' - cat >expect <<-\EOF && - 09e12a9 source-b three - 8e393e1 source-a two + cat >expect <<-EOF && + $(git rev-parse --short :/three) source-b three + $(git rev-parse --short :/two ) source-a two EOF git log --oneline --source source-a...source-b >actual && test_cmp expect actual diff --git a/t/t4203-mailmap.sh b/t/t4203-mailmap.sh index 918ada69eb..586c3a86b1 100755 --- a/t/t4203-mailmap.sh +++ b/t/t4203-mailmap.sh @@ -13,8 +13,8 @@ fuzz_blame () { } test_expect_success setup ' - cat >contacts <<-\EOF && - A U Thor <author@example.com> + cat >contacts <<- EOF && + $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> nick1 <bugs@company.xx> EOF @@ -33,19 +33,19 @@ test_expect_success 'check-mailmap no arguments' ' ' test_expect_success 'check-mailmap arguments' ' - cat >expect <<-\EOF && - A U Thor <author@example.com> + cat >expect <<- EOF && + $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> nick1 <bugs@company.xx> EOF git check-mailmap \ - "A U Thor <author@example.com>" \ + "$GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>" \ "nick1 <bugs@company.xx>" >actual && test_cmp expect actual ' test_expect_success 'check-mailmap --stdin' ' - cat >expect <<-\EOF && - A U Thor <author@example.com> + cat >expect <<- EOF && + $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> nick1 <bugs@company.xx> EOF git check-mailmap --stdin <contacts >actual && @@ -66,8 +66,8 @@ test_expect_success 'check-mailmap bogus contact' ' test_must_fail git check-mailmap bogus ' -cat >expect <<\EOF -A U Thor (1): +cat >expect << EOF +$GIT_AUTHOR_NAME (1): initial nick1 (1): @@ -90,7 +90,7 @@ nick1 (1): EOF test_expect_success 'default .mailmap' ' - echo "Repo Guy <author@example.com>" > .mailmap && + echo "Repo Guy <$GIT_AUTHOR_EMAIL>" > .mailmap && git shortlog HEAD >actual && test_cmp expect actual ' @@ -122,7 +122,7 @@ Internal Guy (1): EOF test_expect_success 'mailmap.file override' ' - echo "External Guy <author@example.com>" >> internal_mailmap/.mailmap && + echo "External Guy <$GIT_AUTHOR_EMAIL>" >> internal_mailmap/.mailmap && git config mailmap.file internal_mailmap/.mailmap && git shortlog HEAD >actual && test_cmp expect actual @@ -178,8 +178,8 @@ test_expect_success 'name entry after email entry, case-insensitive' ' test_cmp expect actual ' -cat >expect <<\EOF -A U Thor (1): +cat >expect << EOF +$GIT_AUTHOR_NAME (1): initial nick1 (1): @@ -195,18 +195,18 @@ test_expect_success 'No mailmap files, but configured' ' test_expect_success 'setup mailmap blob tests' ' git checkout -b map && test_when_finished "git checkout master" && - cat >just-bugs <<-\EOF && + cat >just-bugs <<- EOF && Blob Guy <bugs@company.xx> EOF - cat >both <<-\EOF && - Blob Guy <author@example.com> + cat >both <<- EOF && + Blob Guy <$GIT_AUTHOR_EMAIL> Blob Guy <bugs@company.xx> EOF - printf "Tricky Guy <author@example.com>" >no-newline && + printf "Tricky Guy <$GIT_AUTHOR_EMAIL>" >no-newline && git add just-bugs both no-newline && git commit -m "my mailmaps" && - echo "Repo Guy <author@example.com>" >.mailmap && - echo "Internal Guy <author@example.com>" >internal.map + echo "Repo Guy <$GIT_AUTHOR_EMAIL>" >.mailmap && + echo "Internal Guy <$GIT_AUTHOR_EMAIL>" >internal.map ' test_expect_success 'mailmap.blob set' ' @@ -266,12 +266,12 @@ test_expect_success 'mailmap.blob defaults to off in non-bare repo' ' git init non-bare && ( cd non-bare && - test_commit one .mailmap "Fake Name <author@example.com>" && + test_commit one .mailmap "Fake Name <$GIT_AUTHOR_EMAIL>" && echo " 1 Fake Name" >expect && git shortlog -ns HEAD >actual && test_cmp expect actual && rm .mailmap && - echo " 1 A U Thor" >expect && + echo " 1 $GIT_AUTHOR_NAME" >expect && git shortlog -ns HEAD >actual && test_cmp expect actual ) @@ -305,26 +305,26 @@ test_expect_success 'cleanup after mailmap.blob tests' ' ' test_expect_success 'single-character name' ' - echo " 1 A <author@example.com>" >expect && + echo " 1 A <$GIT_AUTHOR_EMAIL>" >expect && echo " 1 nick1 <bugs@company.xx>" >>expect && - echo "A <author@example.com>" >.mailmap && + echo "A <$GIT_AUTHOR_EMAIL>" >.mailmap && test_when_finished "rm .mailmap" && git shortlog -es HEAD >actual && test_cmp expect actual ' test_expect_success 'preserve canonical email case' ' - echo " 1 A U Thor <AUTHOR@example.com>" >expect && + echo " 1 $GIT_AUTHOR_NAME <AUTHOR@example.com>" >expect && echo " 1 nick1 <bugs@company.xx>" >>expect && - echo "<AUTHOR@example.com> <author@example.com>" >.mailmap && + echo "<AUTHOR@example.com> <$GIT_AUTHOR_EMAIL>" >.mailmap && test_when_finished "rm .mailmap" && git shortlog -es HEAD >actual && test_cmp expect actual ' # Extended mailmap configurations should give us the following output for shortlog -cat >expect <<\EOF -A U Thor <author@example.com> (1): +cat >expect << EOF +$GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> (1): initial CTO <cto@company.xx> (1): @@ -370,7 +370,7 @@ test_expect_success 'Shortlog output (complex mapping)' ' git commit --author "CTO <cto@coompany.xx>" -m seventh && mkdir -p internal_mailmap && - echo "Committed <committer@example.com>" > internal_mailmap/.mailmap && + echo "Committed <$GIT_COMMITTER_EMAIL>" > internal_mailmap/.mailmap && echo "<cto@company.xx> <cto@coompany.xx>" >> internal_mailmap/.mailmap && echo "Some Dude <some@dude.xx> nick1 <bugs@company.xx>" >> internal_mailmap/.mailmap && echo "Other Author <other@author.xx> nick2 <bugs@company.xx>" >> internal_mailmap/.mailmap && @@ -384,27 +384,27 @@ test_expect_success 'Shortlog output (complex mapping)' ' ' # git log with --pretty format which uses the name and email mailmap placemarkers -cat >expect <<\EOF +cat >expect << EOF Author CTO <cto@coompany.xx> maps to CTO <cto@company.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author claus <me@company.xx> maps to Santa Claus <santa.claus@northpole.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author santa <me@company.xx> maps to Santa Claus <santa.claus@northpole.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author nick2 <nick2@company.xx> maps to Other Author <other@author.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author nick2 <bugs@company.xx> maps to Other Author <other@author.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author nick1 <bugs@company.xx> maps to Some Dude <some@dude.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> -Author A U Thor <author@example.com> maps to A U Thor <author@example.com> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> maps to $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> EOF test_expect_success 'Log output (complex mapping)' ' @@ -412,14 +412,42 @@ test_expect_success 'Log output (complex mapping)' ' test_cmp expect actual ' -cat >expect <<\EOF +cat >expect << EOF +Author email cto@coompany.xx has local-part cto +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email me@company.xx has local-part me +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email me@company.xx has local-part me +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email nick2@company.xx has local-part nick2 +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email bugs@company.xx has local-part bugs +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email bugs@company.xx has local-part bugs +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email author@example.com has local-part author +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME +EOF + +test_expect_success 'Log output (local-part email address)' ' + git log --pretty=format:"Author email %ae has local-part %al%nCommitter email %ce has local-part %cl%n" >actual && + test_cmp expect actual +' + +cat >expect << EOF Author: CTO <cto@company.xx> Author: Santa Claus <santa.claus@northpole.xx> Author: Santa Claus <santa.claus@northpole.xx> Author: Other Author <other@author.xx> Author: Other Author <other@author.xx> Author: Some Dude <some@dude.xx> -Author: A U Thor <author@example.com> +Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> EOF test_expect_success 'Log output with --use-mailmap' ' @@ -427,14 +455,14 @@ test_expect_success 'Log output with --use-mailmap' ' test_cmp expect actual ' -cat >expect <<\EOF +cat >expect << EOF Author: CTO <cto@company.xx> Author: Santa Claus <santa.claus@northpole.xx> Author: Santa Claus <santa.claus@northpole.xx> Author: Other Author <other@author.xx> Author: Other Author <other@author.xx> Author: Some Dude <some@dude.xx> -Author: A U Thor <author@example.com> +Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> EOF test_expect_success 'Log output with log.mailmap' ' @@ -443,28 +471,28 @@ test_expect_success 'Log output with log.mailmap' ' ' test_expect_success 'log.mailmap=false disables mailmap' ' - cat >expect <<-\EOF && + cat >expect <<- EOF && Author: CTO <cto@coompany.xx> Author: claus <me@company.xx> Author: santa <me@company.xx> Author: nick2 <nick2@company.xx> Author: nick2 <bugs@company.xx> Author: nick1 <bugs@company.xx> - Author: A U Thor <author@example.com> + Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> EOF git -c log.mailmap=False log | grep Author > actual && test_cmp expect actual ' test_expect_success '--no-use-mailmap disables mailmap' ' - cat >expect <<-\EOF && + cat >expect <<- EOF && Author: CTO <cto@coompany.xx> Author: claus <me@company.xx> Author: santa <me@company.xx> Author: nick2 <nick2@company.xx> Author: nick2 <bugs@company.xx> Author: nick1 <bugs@company.xx> - Author: A U Thor <author@example.com> + Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> EOF git log --no-use-mailmap | grep Author > actual && test_cmp expect actual @@ -500,8 +528,8 @@ test_expect_success 'Only grep replaced author with --use-mailmap' ' ' # git blame -cat >expect <<\EOF -^OBJI (A U Thor DATE 1) one +cat >expect <<EOF +^OBJI ($GIT_AUTHOR_NAME DATE 1) one OBJID (Some Dude DATE 2) two OBJID (Other Author DATE 3) three OBJID (Other Author DATE 4) four diff --git a/t/t4204-patch-id.sh b/t/t4204-patch-id.sh index 0288c17ec6..8ff8bd84c7 100755 --- a/t/t4204-patch-id.sh +++ b/t/t4204-patch-id.sh @@ -25,7 +25,7 @@ test_expect_success 'setup' ' test_expect_success 'patch-id output is well-formed' ' git log -p -1 | git patch-id >output && - grep "^[a-f0-9]\{40\} $(git rev-parse HEAD)$" output + grep "^$OID_REGEX $(git rev-parse HEAD)$" output ' #calculate patch id. Make sure output is not empty. diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index f42a69faa2..204c149d5a 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -134,6 +134,36 @@ test_expect_failure C_LOCALE_OUTPUT 'NUL termination with --stat' ' test_cmp expected actual ' +for p in short medium full fuller email raw +do + test_expect_success "NUL termination with --reflog --pretty=$p" ' + revs="$(git rev-list --reflog)" && + for r in $revs + do + git show -s "$r" --pretty="$p" && + printf "\0" || return 1 + done >expect && + { + git log -z --reflog --pretty="$p" && + printf "\0" + } >actual && + test_cmp expect actual + ' +done + +test_expect_success 'NUL termination with --reflog --pretty=oneline' ' + revs="$(git rev-list --reflog)" && + for r in $revs + do + git show -s --pretty=oneline "$r" >raw && + cat raw | lf_to_nul || exit 1 + done >expect && + # the trailing NUL is already produced so we do not need to + # output another one + git log -z --pretty=oneline --reflog >actual && + test_cmp expect actual +' + test_expect_success 'setup more commits' ' test_commit "message one" one one message-one && test_commit "message two" two two message-two && @@ -503,6 +533,12 @@ test_expect_success 'ISO and ISO-strict date formats display the same values' ' test_cmp expected actual ' +test_expect_success 'short date' ' + git log --format=%ad%n%cd --date=short >expected && + git log --format=%as%n%cs >actual && + test_cmp expected actual +' + # get new digests (with no abbreviations) test_expect_success 'set up log decoration tests' ' head1=$(git rev-parse --verify HEAD~0) && @@ -640,7 +676,7 @@ test_expect_success 'pretty format %(trailers:key=foo) multiple keys' ' test_cmp expect actual ' -test_expect_success '%(trailers:key=nonexistant) becomes empty' ' +test_expect_success '%(trailers:key=nonexistent) becomes empty' ' git log --no-walk --pretty="x%(trailers:key=Nacked-by)x" >actual && echo "xx" >expect && test_cmp expect actual @@ -788,4 +824,47 @@ test_expect_success '%S in git log --format works with other placeholders (part test_cmp expect actual ' +test_expect_success 'log --pretty=reference' ' + git log --pretty="tformat:%h (%s, %as)" >expect && + git log --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference with log.date is overridden by short date' ' + git log --pretty="tformat:%h (%s, %as)" >expect && + test_config log.date rfc && + git log --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference with explicit date overrides short date' ' + git log --date=rfc --pretty="tformat:%h (%s, %ad)" >expect && + git log --date=rfc --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference is never unabbreviated' ' + git log --pretty="tformat:%h (%s, %as)" >expect && + git log --no-abbrev-commit --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference is never decorated' ' + git log --pretty="tformat:%h (%s, %as)" >expect && + git log --decorate=short --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference does not output reflog info' ' + git log --walk-reflogs --pretty="tformat:%h (%s, %as)" >expect && + git log --walk-reflogs --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference is colored appropriately' ' + git log --color=always --pretty="tformat:%C(auto)%h (%s, %as)" >expect && + git log --color=always --pretty=reference >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4208-log-magic-pathspec.sh b/t/t4208-log-magic-pathspec.sh index 4c8f3b8e1b..6cdbe4747a 100755 --- a/t/t4208-log-magic-pathspec.sh +++ b/t/t4208-log-magic-pathspec.sh @@ -55,6 +55,10 @@ test_expect_success '"git log -- :/a" should not be ambiguous' ' git log -- :/a ' +test_expect_success '"git log :/any/path/" should not segfault' ' + test_must_fail git log :/any/path/ +' + # This differs from the ":/a" check above in that :/in looks like a pathspec, # but doesn't match an actual file. test_expect_success '"git log :/in" should not be ambiguous' ' diff --git a/t/t4210-log-i18n.sh b/t/t4210-log-i18n.sh index 6e61f57f09..d2dfcf164e 100755 --- a/t/t4210-log-i18n.sh +++ b/t/t4210-log-i18n.sh @@ -10,6 +10,13 @@ latin1_e=$(printf '\351') # invalid UTF-8 invalid_e=$(printf '\303\50)') # ")" at end to close opening "(" +have_reg_illseq= +if test_have_prereq GETTEXT_LOCALE && + ! LC_ALL=$is_IS_locale test-tool regex --silent $latin1_e +then + have_reg_illseq=1 +fi + test_expect_success 'create commits in different encodings' ' test_tick && cat >msg <<-EOF && @@ -51,43 +58,77 @@ test_expect_success !MINGW 'log --grep does not find non-reencoded values (utf8) test_must_be_empty actual ' -test_expect_success !MINGW 'log --grep does not find non-reencoded values (latin1)' ' +test_expect_success 'log --grep does not find non-reencoded values (latin1)' ' git log --encoding=ISO-8859-1 --format=%s --grep=$utf8_e >actual && test_must_be_empty actual ' +triggers_undefined_behaviour () { + local engine=$1 + + case $engine in + fixed) + if test -n "$have_reg_illseq" && + ! test_have_prereq LIBPCRE2 + then + return 0 + fi + ;; + basic|extended) + if test -n "$have_reg_illseq" + then + return 0 + fi + ;; + esac + return 1 +} + +mismatched_git_log () { + local pattern=$1 + + LC_ALL=$is_IS_locale git log --encoding=ISO-8859-1 --format=%s \ + --grep=$pattern +} + for engine in fixed basic extended perl do prereq= if test $engine = "perl" then - prereq="PCRE" - else - prereq="" + prereq=PCRE fi force_regex= if test $engine != "fixed" then - force_regex=.* + force_regex='.*' fi - test_expect_success !MINGW,GETTEXT_LOCALE,$prereq "-c grep.patternType=$engine log --grep does not find non-reencoded values (latin1 + locale)" " - cat >expect <<-\EOF && - latin1 - utf8 - EOF - LC_ALL=\"$is_IS_locale\" git -c grep.patternType=$engine log --encoding=ISO-8859-1 --format=%s --grep=\"$force_regex$latin1_e\" >actual && - test_cmp expect actual - " - test_expect_success !MINGW,GETTEXT_LOCALE,$prereq "-c grep.patternType=$engine log --grep does not find non-reencoded values (latin1 + locale)" " - LC_ALL=\"$is_IS_locale\" git -c grep.patternType=$engine log --encoding=ISO-8859-1 --format=%s --grep=\"$force_regex$utf8_e\" >actual && - test_must_be_empty actual + test_expect_success $prereq "config grep.patternType=$engine" " + git config grep.patternType $engine " - test_expect_success !MINGW,GETTEXT_LOCALE,$prereq "-c grep.patternType=$engine log --grep does not die on invalid UTF-8 value (latin1 + locale + invalid needle)" " - LC_ALL=\"$is_IS_locale\" git -c grep.patternType=$engine log --encoding=ISO-8859-1 --format=%s --grep=\"$force_regex$invalid_e\" >actual && + test_expect_success GETTEXT_LOCALE,$prereq "log --grep does not find non-reencoded values (latin1 + locale)" " + mismatched_git_log '$force_regex$utf8_e' >actual && test_must_be_empty actual " + + if ! triggers_undefined_behaviour $engine + then + test_expect_success !MINGW,GETTEXT_LOCALE,$prereq "log --grep searches in log output encoding (latin1 + locale)" " + cat >expect <<-\EOF && + latin1 + utf8 + EOF + mismatched_git_log '$force_regex$latin1_e' >actual && + test_cmp expect actual + " + + test_expect_success GETTEXT_LOCALE,$prereq "log --grep does not die on invalid UTF-8 value (latin1 + locale + invalid needle)" " + mismatched_git_log '$force_regex$invalid_e' >actual && + test_must_be_empty actual + " + fi done test_done diff --git a/t/t4211-line-log.sh b/t/t4211-line-log.sh index 8319163744..1428eae262 100755 --- a/t/t4211-line-log.sh +++ b/t/t4211-line-log.sh @@ -4,6 +4,7 @@ test_description='test log -L' . ./test-lib.sh test_expect_success 'setup (import history)' ' + test_oid_init && git fast-import < "$TEST_DIRECTORY"/t4211/history.export && git reset --hard ' @@ -11,7 +12,7 @@ test_expect_success 'setup (import history)' ' canned_test_1 () { test_expect_$1 "$2" " git log $2 >actual && - test_cmp \"\$TEST_DIRECTORY\"/t4211/expect.$3 actual + test_cmp \"\$TEST_DIRECTORY\"/t4211/$(test_oid algo)/expect.$3 actual " } @@ -214,4 +215,72 @@ test_expect_success 'fancy rename following #2' ' test_cmp expect actual ' +# Create the following linear history, where each commit does what its +# subject line promises: +# +# * 66c6410 Modify func2() in file.c +# * 50834e5 Modify other-file +# * fe5851c Modify func1() in file.c +# * 8c7c7dd Add other-file +# * d5f4417 Add func1() and func2() in file.c +test_expect_success 'setup for checking line-log and parent oids' ' + git checkout --orphan parent-oids && + git reset --hard && + + cat >file.c <<-\EOF && + int func1() + { + return F1; + } + + int func2() + { + return F2; + } + EOF + git add file.c && + test_tick && + git commit -m "Add func1() and func2() in file.c" && + + echo 1 >other-file && + git add other-file && + git commit -m "Add other-file" && + + sed -e "s/F1/F1 + 1/" file.c >tmp && + mv tmp file.c && + git commit -a -m "Modify func1() in file.c" && + + echo 2 >other-file && + git commit -a -m "Modify other-file" && + + sed -e "s/F2/F2 + 2/" file.c >tmp && + mv tmp file.c && + git commit -a -m "Modify func2() in file.c" && + + head_oid=$(git rev-parse --short HEAD) && + prev_oid=$(git rev-parse --short HEAD^) && + root_oid=$(git rev-parse --short HEAD~4) +' + +# Parent oid should be from immediate parent. +test_expect_success 'parent oids without parent rewriting' ' + cat >expect <<-EOF && + $head_oid $prev_oid Modify func2() in file.c + $root_oid Add func1() and func2() in file.c + EOF + git log --format="%h %p %s" --no-patch -L:func2:file.c >actual && + test_cmp expect actual +' + +# Parent oid should be from the most recent ancestor touching func2(), +# i.e. in this case from the root commit. +test_expect_success 'parent oids with parent rewriting' ' + cat >expect <<-EOF && + $head_oid $root_oid Modify func2() in file.c + $root_oid Add func1() and func2() in file.c + EOF + git log --format="%h %p %s" --no-patch -L:func2:file.c --parents >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4211/expect.beginning-of-file b/t/t4211/sha1/expect.beginning-of-file index 91b4054898..91b4054898 100644 --- a/t/t4211/expect.beginning-of-file +++ b/t/t4211/sha1/expect.beginning-of-file diff --git a/t/t4211/expect.end-of-file b/t/t4211/sha1/expect.end-of-file index bd25bb2f59..bd25bb2f59 100644 --- a/t/t4211/expect.end-of-file +++ b/t/t4211/sha1/expect.end-of-file diff --git a/t/t4211/expect.move-support-f b/t/t4211/sha1/expect.move-support-f index c905e01bc2..c905e01bc2 100644 --- a/t/t4211/expect.move-support-f +++ b/t/t4211/sha1/expect.move-support-f diff --git a/t/t4211/expect.multiple b/t/t4211/sha1/expect.multiple index 76ad5b598c..76ad5b598c 100644 --- a/t/t4211/expect.multiple +++ b/t/t4211/sha1/expect.multiple diff --git a/t/t4211/expect.multiple-overlapping b/t/t4211/sha1/expect.multiple-overlapping index d930b6eec4..d930b6eec4 100644 --- a/t/t4211/expect.multiple-overlapping +++ b/t/t4211/sha1/expect.multiple-overlapping diff --git a/t/t4211/expect.multiple-superset b/t/t4211/sha1/expect.multiple-superset index d930b6eec4..d930b6eec4 100644 --- a/t/t4211/expect.multiple-superset +++ b/t/t4211/sha1/expect.multiple-superset diff --git a/t/t4211/expect.parallel-change-f-to-main b/t/t4211/sha1/expect.parallel-change-f-to-main index 052def8074..052def8074 100644 --- a/t/t4211/expect.parallel-change-f-to-main +++ b/t/t4211/sha1/expect.parallel-change-f-to-main diff --git a/t/t4211/expect.simple-f b/t/t4211/sha1/expect.simple-f index a1f5bc49c8..a1f5bc49c8 100644 --- a/t/t4211/expect.simple-f +++ b/t/t4211/sha1/expect.simple-f diff --git a/t/t4211/expect.simple-f-to-main b/t/t4211/sha1/expect.simple-f-to-main index a475768710..a475768710 100644 --- a/t/t4211/expect.simple-f-to-main +++ b/t/t4211/sha1/expect.simple-f-to-main diff --git a/t/t4211/expect.simple-main b/t/t4211/sha1/expect.simple-main index 39ce39bebe..39ce39bebe 100644 --- a/t/t4211/expect.simple-main +++ b/t/t4211/sha1/expect.simple-main diff --git a/t/t4211/expect.simple-main-to-end b/t/t4211/sha1/expect.simple-main-to-end index 8480bd9cc4..8480bd9cc4 100644 --- a/t/t4211/expect.simple-main-to-end +++ b/t/t4211/sha1/expect.simple-main-to-end diff --git a/t/t4211/expect.two-ranges b/t/t4211/sha1/expect.two-ranges index 6109aa0dce..6109aa0dce 100644 --- a/t/t4211/expect.two-ranges +++ b/t/t4211/sha1/expect.two-ranges diff --git a/t/t4211/expect.vanishes-early b/t/t4211/sha1/expect.vanishes-early index 1f7cd06941..1f7cd06941 100644 --- a/t/t4211/expect.vanishes-early +++ b/t/t4211/sha1/expect.vanishes-early diff --git a/t/t4211/sha256/expect.beginning-of-file b/t/t4211/sha256/expect.beginning-of-file new file mode 100644 index 0000000000..5adfdfc1a1 --- /dev/null +++ b/t/t4211/sha256/expect.beginning-of-file @@ -0,0 +1,43 @@ +commit 62a40b38fa4f00800004aee81ef287b7201317594ebcb990f38cbe493b01d200 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:47:40 2013 +0100 + + change at very beginning + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -1,3 +1,4 @@ ++#include <unistd.h> + #include <stdio.h> + + long f(long x) + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -1,3 +1,3 @@ + #include <stdio.h> + +-int f(int x) ++long f(long x) + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +1,3 @@ ++#include <stdio.h> ++ ++int f(int x) diff --git a/t/t4211/sha256/expect.end-of-file b/t/t4211/sha256/expect.end-of-file new file mode 100644 index 0000000000..03ab5c1784 --- /dev/null +++ b/t/t4211/sha256/expect.end-of-file @@ -0,0 +1,62 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -20,3 +20,5 @@ + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -20,3 +20,3 @@ + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -19,3 +19,3 @@ +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +18,3 @@ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.move-support-f b/t/t4211/sha256/expect.move-support-f new file mode 100644 index 0000000000..223b4ed2a0 --- /dev/null +++ b/t/t4211/sha256/expect.move-support-f @@ -0,0 +1,80 @@ +commit 4f7a58195a92c400e28a2354328587f1ff14fb77f5cf894536f17ccbc72931b9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:49:50 2013 +0100 + + another simple change + +diff --git a/b.c b/b.c +--- a/b.c ++++ b/b.c +@@ -4,9 +4,9 @@ + long f(long x) + { + int s = 0; + while (x) { +- x >>= 1; ++ x /= 2; + s++; + } + return s; + } + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,9 +3,9 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,8 +3,9 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,8 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} diff --git a/t/t4211/sha256/expect.multiple b/t/t4211/sha256/expect.multiple new file mode 100644 index 0000000000..ca00409b9a --- /dev/null +++ b/t/t4211/sha256/expect.multiple @@ -0,0 +1,104 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,7 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,9 +3,9 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } +@@ -17,5 +17,5 @@ + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,8 +3,9 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,8 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} diff --git a/t/t4211/sha256/expect.multiple-overlapping b/t/t4211/sha256/expect.multiple-overlapping new file mode 100644 index 0000000000..9015a45a25 --- /dev/null +++ b/t/t4211/sha256/expect.multiple-overlapping @@ -0,0 +1,187 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,19 +4,21 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,19 +4,19 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit 5a1b3989063d55e71e7685efa3392f133385b4034bddde530dcb5090d8b8b8ca +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:41 2013 +0100 + + touch comment + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,19 +3,19 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * A comment. ++ * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; + } + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,19 +3,19 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * A comment. + */ + + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,18 +3,19 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + + /* + * A comment. + */ + + int main () + { + printf("%d\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,18 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} ++ ++/* ++ * A comment. ++ */ ++ ++int main () ++{ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.multiple-superset b/t/t4211/sha256/expect.multiple-superset new file mode 100644 index 0000000000..9015a45a25 --- /dev/null +++ b/t/t4211/sha256/expect.multiple-superset @@ -0,0 +1,187 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,19 +4,21 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,19 +4,19 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit 5a1b3989063d55e71e7685efa3392f133385b4034bddde530dcb5090d8b8b8ca +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:41 2013 +0100 + + touch comment + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,19 +3,19 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * A comment. ++ * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; + } + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,19 +3,19 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * A comment. + */ + + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,18 +3,19 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + + /* + * A comment. + */ + + int main () + { + printf("%d\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,18 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} ++ ++/* ++ * A comment. ++ */ ++ ++int main () ++{ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.parallel-change-f-to-main b/t/t4211/sha256/expect.parallel-change-f-to-main new file mode 100644 index 0000000000..e68f8928ea --- /dev/null +++ b/t/t4211/sha256/expect.parallel-change-f-to-main @@ -0,0 +1,160 @@ +commit 98117c2059b76c36995748fb97b02542aef477fe26379e94c18fd70f7790bc67 +Merge: b511694 4f7a581 +Author: Thomas Rast <trast@inf.ethz.ch> +Date: Fri Apr 12 16:16:24 2013 +0200 + + Merge across the rename + + +commit 4f7a58195a92c400e28a2354328587f1ff14fb77f5cf894536f17ccbc72931b9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:49:50 2013 +0100 + + another simple change + +diff --git a/b.c b/b.c +--- a/b.c ++++ b/b.c +@@ -4,14 +4,14 @@ + long f(long x) + { + int s = 0; + while (x) { +- x >>= 1; ++ x /= 2; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + +commit b511694f5337663fbd697622993a5f8e1099eca84be4df313f2b3ee94a098b42 +Author: Thomas Rast <trast@inf.ethz.ch> +Date: Fri Apr 12 16:15:57 2013 +0200 + + change on another line of history while rename happens + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,14 +4,14 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * This is only an example! ++ * This is only a short example! + */ + + +commit 5a1b3989063d55e71e7685efa3392f133385b4034bddde530dcb5090d8b8b8ca +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:41 2013 +0100 + + touch comment + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,14 +3,14 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * A comment. ++ * This is only an example! + */ + + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,14 +3,14 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * A comment. + */ + + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,13 +3,14 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + + /* + * A comment. + */ + + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,13 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} ++ ++/* ++ * A comment. ++ */ ++ diff --git a/t/t4211/sha256/expect.simple-f b/t/t4211/sha256/expect.simple-f new file mode 100644 index 0000000000..65508d7c0b --- /dev/null +++ b/t/t4211/sha256/expect.simple-f @@ -0,0 +1,59 @@ +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,9 +3,9 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,8 +3,9 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,8 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} diff --git a/t/t4211/sha256/expect.simple-f-to-main b/t/t4211/sha256/expect.simple-f-to-main new file mode 100644 index 0000000000..77b721c196 --- /dev/null +++ b/t/t4211/sha256/expect.simple-f-to-main @@ -0,0 +1,100 @@ +commit 5a1b3989063d55e71e7685efa3392f133385b4034bddde530dcb5090d8b8b8ca +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:41 2013 +0100 + + touch comment + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,14 +3,14 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * A comment. ++ * This is only an example! + */ + + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,14 +3,14 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * A comment. + */ + + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,13 +3,14 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + + /* + * A comment. + */ + + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,13 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} ++ ++/* ++ * A comment. ++ */ ++ diff --git a/t/t4211/sha256/expect.simple-main b/t/t4211/sha256/expect.simple-main new file mode 100644 index 0000000000..d20708c9f9 --- /dev/null +++ b/t/t4211/sha256/expect.simple-main @@ -0,0 +1,68 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -17,5 +17,5 @@ + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +16,5 @@ ++int main () ++{ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.simple-main-to-end b/t/t4211/sha256/expect.simple-main-to-end new file mode 100644 index 0000000000..617cdf3481 --- /dev/null +++ b/t/t4211/sha256/expect.simple-main-to-end @@ -0,0 +1,70 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,7 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -17,5 +17,5 @@ + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +16,5 @@ ++int main () ++{ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.two-ranges b/t/t4211/sha256/expect.two-ranges new file mode 100644 index 0000000000..af57c8b997 --- /dev/null +++ b/t/t4211/sha256/expect.two-ranges @@ -0,0 +1,102 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,9 +3,9 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } +@@ -17,5 +17,5 @@ + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,8 +3,9 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,8 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} diff --git a/t/t4211/sha256/expect.vanishes-early b/t/t4211/sha256/expect.vanishes-early new file mode 100644 index 0000000000..11ec9bdecf --- /dev/null +++ b/t/t4211/sha256/expect.vanishes-early @@ -0,0 +1,39 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -22,1 +24,1 @@ +-} +\ No newline at end of file ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -22,1 +22,1 @@ +-} ++} +\ No newline at end of file + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +20,1 @@ ++} diff --git a/t/t4213-log-tabexpand.sh b/t/t4213-log-tabexpand.sh index 7f90f58c03..53a4af3244 100755 --- a/t/t4213-log-tabexpand.sh +++ b/t/t4213-log-tabexpand.sh @@ -36,7 +36,7 @@ count_expand () esac # Prefix the output with the command line arguments, and - # replace SP with a dot both in the expecte and actual output + # replace SP with a dot both in the expected and actual output # so that test_cmp would show the difference together with the # breakage in a way easier to consume by the debugging user. { diff --git a/t/t4214-log-graph-octopus.sh b/t/t4214-log-graph-octopus.sh index 3ae8e51e50..a080325098 100755 --- a/t/t4214-log-graph-octopus.sh +++ b/t/t4214-log-graph-octopus.sh @@ -3,6 +3,16 @@ test_description='git log --graph of skewed left octopus merge.' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-log-graph.sh + +test_cmp_graph () { + cat >expect && + lib_test_cmp_graph --color=never --date-order --format=%s "$@" +} + +test_cmp_colored_graph () { + lib_test_cmp_colored_graph --date-order --format=%s "$@" +} test_expect_success 'set up merge history' ' test_commit initial && @@ -24,65 +34,55 @@ test_expect_success 'set up merge history' ' ' test_expect_success 'log --graph with tricky octopus merge, no color' ' - cat >expect.uncolored <<-\EOF && + test_cmp_graph left octopus-merge <<-\EOF * left - | *---. octopus-merge - | |\ \ \ - |/ / / / + | *-. octopus-merge + |/|\ \ | | | * 4 | | * | 3 | | |/ - | * | 2 + | * / 2 | |/ - * | 1 + * / 1 |/ * initial EOF - git log --color=never --graph --date-order --pretty=tformat:%s left octopus-merge >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual ' test_expect_success 'log --graph with tricky octopus merge with colors' ' test_config log.graphColors red,green,yellow,blue,magenta,cyan && cat >expect.colors <<-\EOF && * left - <RED>|<RESET> *<BLUE>-<RESET><BLUE>-<RESET><MAGENTA>-<RESET><MAGENTA>.<RESET> octopus-merge - <RED>|<RESET> <RED>|<RESET><YELLOW>\<RESET> <BLUE>\<RESET> <MAGENTA>\<RESET> - <RED>|<RESET><RED>/<RESET> <YELLOW>/<RESET> <BLUE>/<RESET> <MAGENTA>/<RESET> + <RED>|<RESET> *<MAGENTA>-<RESET><MAGENTA>.<RESET> octopus-merge + <RED>|<RESET><RED>/<RESET><YELLOW>|<RESET><BLUE>\<RESET> <MAGENTA>\<RESET> <RED>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 4 <RED>|<RESET> <YELLOW>|<RESET> * <MAGENTA>|<RESET> 3 <RED>|<RESET> <YELLOW>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> - <RED>|<RESET> * <MAGENTA>|<RESET> 2 + <RED>|<RESET> * <MAGENTA>/<RESET> 2 <RED>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> - * <MAGENTA>|<RESET> 1 + * <MAGENTA>/<RESET> 1 <MAGENTA>|<RESET><MAGENTA>/<RESET> * initial EOF - git log --color=always --graph --date-order --pretty=tformat:%s left octopus-merge >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors + test_cmp_colored_graph left octopus-merge ' # Repeat the previous two tests with "normal" octopus merge (i.e., # without the first parent skewing to the "left" branch column). test_expect_success 'log --graph with normal octopus merge, no color' ' - cat >expect.uncolored <<-\EOF && + test_cmp_graph octopus-merge <<-\EOF *---. octopus-merge |\ \ \ | | | * 4 | | * | 3 | | |/ - | * | 2 + | * / 2 | |/ - * | 1 + * / 1 |/ * initial EOF - git log --color=never --graph --date-order --pretty=tformat:%s octopus-merge >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual ' test_expect_success 'log --graph with normal octopus merge with colors' ' @@ -92,38 +92,33 @@ test_expect_success 'log --graph with normal octopus merge with colors' ' <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> * 4 <RED>|<RESET> <GREEN>|<RESET> * <BLUE>|<RESET> 3 <RED>|<RESET> <GREEN>|<RESET> <BLUE>|<RESET><BLUE>/<RESET> - <RED>|<RESET> * <BLUE>|<RESET> 2 + <RED>|<RESET> * <BLUE>/<RESET> 2 <RED>|<RESET> <BLUE>|<RESET><BLUE>/<RESET> - * <BLUE>|<RESET> 1 + * <BLUE>/<RESET> 1 <BLUE>|<RESET><BLUE>/<RESET> * initial EOF test_config log.graphColors red,green,yellow,blue,magenta,cyan && - git log --color=always --graph --date-order --pretty=tformat:%s octopus-merge >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors + test_cmp_colored_graph octopus-merge ' test_expect_success 'log --graph with normal octopus merge and child, no color' ' - cat >expect.uncolored <<-\EOF && + test_cmp_graph after-merge <<-\EOF * after-merge *---. octopus-merge |\ \ \ | | | * 4 | | * | 3 | | |/ - | * | 2 + | * / 2 | |/ - * | 1 + * / 1 |/ * initial EOF - git log --color=never --graph --date-order --pretty=tformat:%s after-merge >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual ' -test_expect_failure 'log --graph with normal octopus and child merge with colors' ' +test_expect_success 'log --graph with normal octopus and child merge with colors' ' cat >expect.colors <<-\EOF && * after-merge *<BLUE>-<RESET><BLUE>-<RESET><MAGENTA>-<RESET><MAGENTA>.<RESET> octopus-merge @@ -131,63 +126,54 @@ test_expect_failure 'log --graph with normal octopus and child merge with colors <GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 4 <GREEN>|<RESET> <YELLOW>|<RESET> * <MAGENTA>|<RESET> 3 <GREEN>|<RESET> <YELLOW>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> - <GREEN>|<RESET> * <MAGENTA>|<RESET> 2 + <GREEN>|<RESET> * <MAGENTA>/<RESET> 2 <GREEN>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> - * <MAGENTA>|<RESET> 1 + * <MAGENTA>/<RESET> 1 <MAGENTA>|<RESET><MAGENTA>/<RESET> * initial EOF test_config log.graphColors red,green,yellow,blue,magenta,cyan && - git log --color=always --graph --date-order --pretty=tformat:%s after-merge >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors + test_cmp_colored_graph after-merge ' test_expect_success 'log --graph with tricky octopus merge and its child, no color' ' - cat >expect.uncolored <<-\EOF && + test_cmp_graph left after-merge <<-\EOF * left | * after-merge - | *---. octopus-merge - | |\ \ \ - |/ / / / + | *-. octopus-merge + |/|\ \ | | | * 4 | | * | 3 | | |/ - | * | 2 + | * / 2 | |/ - * | 1 + * / 1 |/ * initial EOF - git log --color=never --graph --date-order --pretty=tformat:%s left after-merge >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual ' -test_expect_failure 'log --graph with tricky octopus merge and its child with colors' ' +test_expect_success 'log --graph with tricky octopus merge and its child with colors' ' test_config log.graphColors red,green,yellow,blue,magenta,cyan && cat >expect.colors <<-\EOF && * left <RED>|<RESET> * after-merge - <RED>|<RESET> *<MAGENTA>-<RESET><MAGENTA>-<RESET><CYAN>-<RESET><CYAN>.<RESET> octopus-merge - <RED>|<RESET> <RED>|<RESET><BLUE>\<RESET> <MAGENTA>\<RESET> <CYAN>\<RESET> - <RED>|<RESET><RED>/<RESET> <BLUE>/<RESET> <MAGENTA>/<RESET> <CYAN>/<RESET> + <RED>|<RESET> *<CYAN>-<RESET><CYAN>.<RESET> octopus-merge + <RED>|<RESET><RED>/<RESET><BLUE>|<RESET><MAGENTA>\<RESET> <CYAN>\<RESET> <RED>|<RESET> <BLUE>|<RESET> <MAGENTA>|<RESET> * 4 <RED>|<RESET> <BLUE>|<RESET> * <CYAN>|<RESET> 3 <RED>|<RESET> <BLUE>|<RESET> <CYAN>|<RESET><CYAN>/<RESET> - <RED>|<RESET> * <CYAN>|<RESET> 2 + <RED>|<RESET> * <CYAN>/<RESET> 2 <RED>|<RESET> <CYAN>|<RESET><CYAN>/<RESET> - * <CYAN>|<RESET> 1 + * <CYAN>/<RESET> 1 <CYAN>|<RESET><CYAN>/<RESET> * initial EOF - git log --color=always --graph --date-order --pretty=tformat:%s left after-merge >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors + test_cmp_colored_graph left after-merge ' test_expect_success 'log --graph with crossover in octopus merge, no color' ' - cat >expect.uncolored <<-\EOF && + test_cmp_graph after-4 octopus-merge <<-\EOF * after-4 | *---. octopus-merge | |\ \ \ @@ -204,12 +190,9 @@ test_expect_success 'log --graph with crossover in octopus merge, no color' ' |/ * initial EOF - git log --color=never --graph --date-order --pretty=tformat:%s after-4 octopus-merge >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual ' -test_expect_failure 'log --graph with crossover in octopus merge with colors' ' +test_expect_success 'log --graph with crossover in octopus merge with colors' ' test_config log.graphColors red,green,yellow,blue,magenta,cyan && cat >expect.colors <<-\EOF && * after-4 @@ -228,13 +211,11 @@ test_expect_failure 'log --graph with crossover in octopus merge with colors' ' <MAGENTA>|<RESET><MAGENTA>/<RESET> * initial EOF - git log --color=always --graph --date-order --pretty=tformat:%s after-4 octopus-merge >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors + test_cmp_colored_graph after-4 octopus-merge ' test_expect_success 'log --graph with crossover in octopus merge and its child, no color' ' - cat >expect.uncolored <<-\EOF && + test_cmp_graph after-4 after-merge <<-\EOF * after-4 | * after-merge | *---. octopus-merge @@ -252,12 +233,9 @@ test_expect_success 'log --graph with crossover in octopus merge and its child, |/ * initial EOF - git log --color=never --graph --date-order --pretty=tformat:%s after-4 after-merge >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual ' -test_expect_failure 'log --graph with crossover in octopus merge and its child with colors' ' +test_expect_success 'log --graph with crossover in octopus merge and its child with colors' ' test_config log.graphColors red,green,yellow,blue,magenta,cyan && cat >expect.colors <<-\EOF && * after-4 @@ -277,13 +255,11 @@ test_expect_failure 'log --graph with crossover in octopus merge and its child w <CYAN>|<RESET><CYAN>/<RESET> * initial EOF - git log --color=always --graph --date-order --pretty=tformat:%s after-4 after-merge >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors + test_cmp_colored_graph after-4 after-merge ' test_expect_success 'log --graph with unrelated commit and octopus tip, no color' ' - cat >expect.uncolored <<-\EOF && + test_cmp_graph after-initial octopus-merge <<-\EOF * after-initial | *---. octopus-merge | |\ \ \ @@ -300,9 +276,6 @@ test_expect_success 'log --graph with unrelated commit and octopus tip, no color |/ * initial EOF - git log --color=never --graph --date-order --pretty=tformat:%s after-initial octopus-merge >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual ' test_expect_success 'log --graph with unrelated commit and octopus tip with colors' ' @@ -324,13 +297,11 @@ test_expect_success 'log --graph with unrelated commit and octopus tip with colo <RED>|<RESET><RED>/<RESET> * initial EOF - git log --color=always --graph --date-order --pretty=tformat:%s after-initial octopus-merge >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors + test_cmp_colored_graph after-initial octopus-merge ' test_expect_success 'log --graph with unrelated commit and octopus child, no color' ' - cat >expect.uncolored <<-\EOF && + test_cmp_graph after-initial after-merge <<-\EOF * after-initial | * after-merge | *---. octopus-merge @@ -348,12 +319,9 @@ test_expect_success 'log --graph with unrelated commit and octopus child, no col |/ * initial EOF - git log --color=never --graph --date-order --pretty=tformat:%s after-initial after-merge >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual ' -test_expect_failure 'log --graph with unrelated commit and octopus child with colors' ' +test_expect_success 'log --graph with unrelated commit and octopus child with colors' ' test_config log.graphColors red,green,yellow,blue,magenta,cyan && cat >expect.colors <<-\EOF && * after-initial @@ -373,9 +341,7 @@ test_expect_failure 'log --graph with unrelated commit and octopus child with co <RED>|<RESET><RED>/<RESET> * initial EOF - git log --color=always --graph --date-order --pretty=tformat:%s after-initial after-merge >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors + test_cmp_colored_graph after-initial after-merge ' test_done diff --git a/t/t4215-log-skewed-merges.sh b/t/t4215-log-skewed-merges.sh new file mode 100755 index 0000000000..28d0779a8c --- /dev/null +++ b/t/t4215-log-skewed-merges.sh @@ -0,0 +1,373 @@ +#!/bin/sh + +test_description='git log --graph of skewed merges' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-log-graph.sh + +check_graph () { + cat >expect && + lib_test_cmp_graph --format=%s "$@" +} + +test_expect_success 'log --graph with merge fusing with its left and right neighbors' ' + git checkout --orphan _p && + test_commit A && + test_commit B && + git checkout -b _q @^ && test_commit C && + git checkout -b _r @^ && test_commit D && + git checkout _p && git merge --no-ff _q _r -m E && + git checkout _r && test_commit F && + git checkout _p && git merge --no-ff _r -m G && + git checkout @^^ && git merge --no-ff _p -m H && + + check_graph <<-\EOF + * H + |\ + | * G + | |\ + | | * F + | * | E + |/|\| + | | * D + | * | C + | |/ + * / B + |/ + * A + EOF +' + +test_expect_success 'log --graph with left-skewed merge' ' + git checkout --orphan 0_p && test_commit 0_A && + git checkout -b 0_q 0_p && test_commit 0_B && + git checkout -b 0_r 0_p && + test_commit 0_C && + test_commit 0_D && + git checkout -b 0_s 0_p && test_commit 0_E && + git checkout -b 0_t 0_p && git merge --no-ff 0_r^ 0_s -m 0_F && + git checkout 0_p && git merge --no-ff 0_s -m 0_G && + git checkout @^ && git merge --no-ff 0_q 0_r 0_t 0_p -m 0_H && + + check_graph <<-\EOF + *-----. 0_H + |\ \ \ \ + | | | | * 0_G + | |_|_|/| + |/| | | | + | | | * | 0_F + | |_|/|\| + |/| | | | + | | | | * 0_E + | |_|_|/ + |/| | | + | | * | 0_D + | | |/ + | | * 0_C + | |/ + |/| + | * 0_B + |/ + * 0_A + EOF +' + +test_expect_success 'log --graph with nested left-skewed merge' ' + git checkout --orphan 1_p && + test_commit 1_A && + test_commit 1_B && + test_commit 1_C && + git checkout -b 1_q @^ && test_commit 1_D && + git checkout 1_p && git merge --no-ff 1_q -m 1_E && + git checkout -b 1_r @~3 && test_commit 1_F && + git checkout 1_p && git merge --no-ff 1_r -m 1_G && + git checkout @^^ && git merge --no-ff 1_p -m 1_H && + + check_graph <<-\EOF + * 1_H + |\ + | * 1_G + | |\ + | | * 1_F + | * | 1_E + |/| | + | * | 1_D + * | | 1_C + |/ / + * / 1_B + |/ + * 1_A + EOF +' + +test_expect_success 'log --graph with nested left-skewed merge following normal merge' ' + git checkout --orphan 2_p && + test_commit 2_A && + test_commit 2_B && + test_commit 2_C && + git checkout -b 2_q @^^ && + test_commit 2_D && + test_commit 2_E && + git checkout -b 2_r @^ && test_commit 2_F && + git checkout 2_q && + git merge --no-ff 2_r -m 2_G && + git merge --no-ff 2_p^ -m 2_H && + git checkout -b 2_s @^^ && git merge --no-ff 2_q -m 2_J && + git checkout 2_p && git merge --no-ff 2_s -m 2_K && + + check_graph <<-\EOF + * 2_K + |\ + | * 2_J + | |\ + | | * 2_H + | | |\ + | | * | 2_G + | |/| | + | | * | 2_F + | * | | 2_E + | |/ / + | * | 2_D + * | | 2_C + | |/ + |/| + * | 2_B + |/ + * 2_A + EOF +' + +test_expect_success 'log --graph with nested right-skewed merge following left-skewed merge' ' + git checkout --orphan 3_p && + test_commit 3_A && + git checkout -b 3_q && + test_commit 3_B && + test_commit 3_C && + git checkout -b 3_r @^ && + test_commit 3_D && + git checkout 3_q && git merge --no-ff 3_r -m 3_E && + git checkout 3_p && git merge --no-ff 3_q -m 3_F && + git checkout 3_r && test_commit 3_G && + git checkout 3_p && git merge --no-ff 3_r -m 3_H && + git checkout @^^ && git merge --no-ff 3_p -m 3_J && + + check_graph <<-\EOF + * 3_J + |\ + | * 3_H + | |\ + | | * 3_G + | * | 3_F + |/| | + | * | 3_E + | |\| + | | * 3_D + | * | 3_C + | |/ + | * 3_B + |/ + * 3_A + EOF +' + +test_expect_success 'log --graph with right-skewed merge following a left-skewed one' ' + git checkout --orphan 4_p && + test_commit 4_A && + test_commit 4_B && + test_commit 4_C && + git checkout -b 4_q @^^ && test_commit 4_D && + git checkout -b 4_r 4_p^ && git merge --no-ff 4_q -m 4_E && + git checkout -b 4_s 4_p^^ && + git merge --no-ff 4_r -m 4_F && + git merge --no-ff 4_p -m 4_G && + git checkout @^^ && git merge --no-ff 4_s -m 4_H && + + check_graph --date-order <<-\EOF + * 4_H + |\ + | * 4_G + | |\ + | * | 4_F + |/| | + | * | 4_E + | |\ \ + | | * | 4_D + | |/ / + |/| | + | | * 4_C + | |/ + | * 4_B + |/ + * 4_A + EOF +' + +test_expect_success 'log --graph with octopus merge with column joining its penultimate parent' ' + git checkout --orphan 5_p && + test_commit 5_A && + git branch 5_q && + git branch 5_r && + test_commit 5_B && + git checkout 5_q && test_commit 5_C && + git checkout 5_r && test_commit 5_D && + git checkout 5_p && + git merge --no-ff 5_q 5_r -m 5_E && + git checkout 5_q && test_commit 5_F && + git checkout -b 5_s 5_p^ && + git merge --no-ff 5_p 5_q -m 5_G && + git checkout 5_r && + git merge --no-ff 5_s -m 5_H && + + check_graph <<-\EOF + * 5_H + |\ + | *-. 5_G + | |\ \ + | | | * 5_F + | | * | 5_E + | |/|\ \ + | |_|/ / + |/| | / + | | |/ + * | | 5_D + | | * 5_C + | |/ + |/| + | * 5_B + |/ + * 5_A + EOF +' + +test_expect_success 'log --graph with multiple tips' ' + git checkout --orphan 6_1 && + test_commit 6_A && + git branch 6_2 && + git branch 6_4 && + test_commit 6_B && + git branch 6_3 && + test_commit 6_C && + git checkout 6_2 && test_commit 6_D && + git checkout 6_3 && test_commit 6_E && + git checkout -b 6_5 6_1 && + git merge --no-ff 6_2 -m 6_F && + git checkout 6_4 && test_commit 6_G && + git checkout 6_3 && + git merge --no-ff 6_4 -m 6_H && + git checkout 6_1 && + git merge --no-ff 6_2 -m 6_I && + + check_graph 6_1 6_3 6_5 <<-\EOF + * 6_I + |\ + | | * 6_H + | | |\ + | | | * 6_G + | | * | 6_E + | | | | * 6_F + | |_|_|/| + |/| | |/ + | | |/| + | |/| | + | * | | 6_D + | | |/ + | |/| + * | | 6_C + | |/ + |/| + * | 6_B + |/ + * 6_A + EOF +' + +test_expect_success 'log --graph with multiple tips and colors' ' + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + cat >expect.colors <<-\EOF && + * 6_I + <RED>|<RESET><GREEN>\<RESET> + <RED>|<RESET> <GREEN>|<RESET> * 6_H + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET><BLUE>\<RESET> + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> * 6_G + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 6_F + <RED>|<RESET> <GREEN>|<RESET><RED>_<RESET><YELLOW>|<RESET><RED>_<RESET><BLUE>|<RESET><RED>/<RESET><GREEN>|<RESET> + <RED>|<RESET><RED>/<RESET><GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET><GREEN>/<RESET> + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET><GREEN>/<RESET><BLUE>|<RESET> + <RED>|<RESET> <GREEN>|<RESET><GREEN>/<RESET><YELLOW>|<RESET> <BLUE>|<RESET> + <RED>|<RESET> <GREEN>|<RESET> * <BLUE>|<RESET> 6_E + <RED>|<RESET> * <CYAN>|<RESET> <BLUE>|<RESET> 6_D + <RED>|<RESET> <BLUE>|<RESET> <CYAN>|<RESET><BLUE>/<RESET> + <RED>|<RESET> <BLUE>|<RESET><BLUE>/<RESET><CYAN>|<RESET> + * <BLUE>|<RESET> <CYAN>|<RESET> 6_C + <CYAN>|<RESET> <BLUE>|<RESET><CYAN>/<RESET> + <CYAN>|<RESET><CYAN>/<RESET><BLUE>|<RESET> + * <BLUE>|<RESET> 6_B + <BLUE>|<RESET><BLUE>/<RESET> + * 6_A + EOF + lib_test_cmp_colored_graph --date-order --pretty=tformat:%s 6_1 6_3 6_5 +' + +test_expect_success 'log --graph with multiple tips' ' + git checkout --orphan 7_1 && + test_commit 7_A && + test_commit 7_B && + test_commit 7_C && + git checkout -b 7_2 7_1~2 && + test_commit 7_D && + test_commit 7_E && + git checkout -b 7_3 7_1~1 && + test_commit 7_F && + test_commit 7_G && + git checkout -b 7_4 7_2~1 && + test_commit 7_H && + git checkout -b 7_5 7_1~2 && + test_commit 7_I && + git checkout -b 7_6 7_3~1 && + test_commit 7_J && + git checkout -b M_1 7_1 && + git merge --no-ff 7_2 -m 7_M1 && + git checkout -b M_3 7_3 && + git merge --no-ff 7_4 -m 7_M2 && + git checkout -b M_5 7_5 && + git merge --no-ff 7_6 -m 7_M3 && + git checkout -b M_7 7_1 && + git merge --no-ff 7_2 7_3 -m 7_M4 && + + check_graph M_1 M_3 M_5 M_7 <<-\EOF + * 7_M1 + |\ + | | * 7_M2 + | | |\ + | | | * 7_H + | | | | * 7_M3 + | | | | |\ + | | | | | * 7_J + | | | | * | 7_I + | | | | | | * 7_M4 + | |_|_|_|_|/|\ + |/| | | | |/ / + | | |_|_|/| / + | |/| | | |/ + | | | |_|/| + | | |/| | | + | | * | | | 7_G + | | | |_|/ + | | |/| | + | | * | | 7_F + | * | | | 7_E + | | |/ / + | |/| | + | * | | 7_D + | | |/ + | |/| + * | | 7_C + | |/ + |/| + * | 7_B + |/ + * 7_A + EOF +' + +test_done diff --git a/t/t4216-log-bloom.sh b/t/t4216-log-bloom.sh new file mode 100755 index 0000000000..c855bcd3e7 --- /dev/null +++ b/t/t4216-log-bloom.sh @@ -0,0 +1,155 @@ +#!/bin/sh + +test_description='git log for a path with Bloom filters' +. ./test-lib.sh + +GIT_TEST_COMMIT_GRAPH=0 +GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=0 + +test_expect_success 'setup test - repo, commits, commit graph, log outputs' ' + git init && + mkdir A A/B A/B/C && + test_commit c1 A/file1 && + test_commit c2 A/B/file2 && + test_commit c3 A/B/C/file3 && + test_commit c4 A/file1 && + test_commit c5 A/B/file2 && + test_commit c6 A/B/C/file3 && + test_commit c7 A/file1 && + test_commit c8 A/B/file2 && + test_commit c9 A/B/C/file3 && + test_commit c10 file_to_be_deleted && + git checkout -b side HEAD~4 && + test_commit side-1 file4 && + git checkout master && + git merge side && + test_commit c11 file5 && + mv file5 file5_renamed && + git add file5_renamed && + git commit -m "rename" && + rm file_to_be_deleted && + git add . && + git commit -m "file removed" && + git commit-graph write --reachable --changed-paths +' +graph_read_expect () { + NUM_CHUNKS=5 + cat >expect <<- EOF + header: 43475048 1 1 $NUM_CHUNKS 0 + num_commits: $1 + chunks: oid_fanout oid_lookup commit_metadata bloom_indexes bloom_data + EOF + test-tool read-graph >actual && + test_cmp expect actual +} + +test_expect_success 'commit-graph write wrote out the bloom chunks' ' + graph_read_expect 15 +' + +# Turn off any inherited trace2 settings for this test. +sane_unset GIT_TRACE2 GIT_TRACE2_PERF GIT_TRACE2_EVENT +sane_unset GIT_TRACE2_PERF_BRIEF +sane_unset GIT_TRACE2_CONFIG_PARAMS + +setup () { + rm "$TRASH_DIRECTORY/trace.perf" + git -c core.commitGraph=false log --pretty="format:%s" $1 >log_wo_bloom && + GIT_TRACE2_PERF="$TRASH_DIRECTORY/trace.perf" git -c core.commitGraph=true log --pretty="format:%s" $1 >log_w_bloom +} + +test_bloom_filters_used () { + log_args=$1 + bloom_trace_prefix="statistics:{\"filter_not_present\":0,\"zero_length_filter\":0,\"maybe\"" + setup "$log_args" && + grep -q "$bloom_trace_prefix" "$TRASH_DIRECTORY/trace.perf" && + test_cmp log_wo_bloom log_w_bloom && + test_path_is_file "$TRASH_DIRECTORY/trace.perf" +} + +test_bloom_filters_not_used () { + log_args=$1 + setup "$log_args" && + ! grep -q "statistics:{\"filter_not_present\":" "$TRASH_DIRECTORY/trace.perf" && + test_cmp log_wo_bloom log_w_bloom +} + +for path in A A/B A/B/C A/file1 A/B/file2 A/B/C/file3 file4 file5 file5_renamed file_to_be_deleted +do + for option in "" \ + "--all" \ + "--full-history" \ + "--full-history --simplify-merges" \ + "--simplify-merges" \ + "--simplify-by-decoration" \ + "--follow" \ + "--first-parent" \ + "--topo-order" \ + "--date-order" \ + "--author-date-order" \ + "--ancestry-path side..master" + do + test_expect_success "git log option: $option for path: $path" ' + test_bloom_filters_used "$option -- $path" + ' + done +done + +test_expect_success 'git log -- folder works with and without the trailing slash' ' + test_bloom_filters_used "-- A" && + test_bloom_filters_used "-- A/" +' + +test_expect_success 'git log for path that does not exist. ' ' + test_bloom_filters_used "-- path_does_not_exist" +' + +test_expect_success 'git log with --walk-reflogs does not use Bloom filters' ' + test_bloom_filters_not_used "--walk-reflogs -- A" +' + +test_expect_success 'git log -- multiple path specs does not use Bloom filters' ' + test_bloom_filters_not_used "-- file4 A/file1" +' + +test_expect_success 'git log with wildcard that resolves to a single path uses Bloom filters' ' + test_bloom_filters_used "-- *4" && + test_bloom_filters_used "-- *renamed" +' + +test_expect_success 'git log with wildcard that resolves to a multiple paths does not uses Bloom filters' ' + test_bloom_filters_not_used "-- *" && + test_bloom_filters_not_used "-- file*" +' + +test_expect_success 'setup - add commit-graph to the chain without Bloom filters' ' + test_commit c14 A/anotherFile2 && + test_commit c15 A/B/anotherFile2 && + test_commit c16 A/B/C/anotherFile2 && + GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=0 git commit-graph write --reachable --split && + test_line_count = 2 .git/objects/info/commit-graphs/commit-graph-chain +' + +test_expect_success 'Do not use Bloom filters if the latest graph does not have Bloom filters.' ' + test_bloom_filters_not_used "-- A/B" +' + +test_expect_success 'setup - add commit-graph to the chain with Bloom filters' ' + test_commit c17 A/anotherFile3 && + git commit-graph write --reachable --changed-paths --split && + test_line_count = 3 .git/objects/info/commit-graphs/commit-graph-chain +' + +test_bloom_filters_used_when_some_filters_are_missing () { + log_args=$1 + bloom_trace_prefix="statistics:{\"filter_not_present\":3,\"zero_length_filter\":0,\"maybe\":8,\"definitely_not\":6" + setup "$log_args" && + grep -q "$bloom_trace_prefix" "$TRASH_DIRECTORY/trace.perf" && + test_cmp log_wo_bloom log_w_bloom +} + +test_expect_success 'Use Bloom filters if they exist in the latest but not all commit graphs in the chain.' ' + test_bloom_filters_used_when_some_filters_are_missing "-- A/B" +' + +test_done diff --git a/t/t4254-am-corrupt.sh b/t/t4254-am-corrupt.sh index fd3bdbfe2c..daf01c309d 100755 --- a/t/t4254-am-corrupt.sh +++ b/t/t4254-am-corrupt.sh @@ -3,6 +3,37 @@ test_description='git am with corrupt input' . ./test-lib.sh +make_mbox_with_nul () { + space=' ' + q_nul_in_subject= + q_nul_in_body= + while test $# -ne 0 + do + case "$1" in + subject) q_nul_in_subject='=00' ;; + body) q_nul_in_body='=00' ;; + esac && + shift + done && + cat <<-EOF + From ec7364544f690c560304f5a5de9428ea3b978b26 Mon Sep 17 00:00:00 2001 + From: A U Thor <author@example.com> + Date: Sun, 19 Apr 2020 13:42:07 +0700 + Subject: [PATCH] =?ISO-8859-1?q?=C4=CB${q_nul_in_subject}=D1=CF=D6?= + MIME-Version: 1.0 + Content-Type: text/plain; charset=ISO-8859-1 + Content-Transfer-Encoding: quoted-printable + + abc${q_nul_in_body}def + --- + diff --git a/afile b/afile + new file mode 100644 + index 0000000000..e69de29bb2 + --$space + 2.26.1 + EOF +} + test_expect_success setup ' # Note the missing "+++" line: cat >bad-patch.diff <<-\EOF && @@ -25,13 +56,27 @@ test_expect_success setup ' # fatal: unable to write file '(null)' mode 100644: Bad address # Also, it had the unwanted side-effect of deleting f. test_expect_success 'try to apply corrupted patch' ' - test_must_fail git -c advice.amWorkDir=false am bad-patch.diff 2>actual -' - -test_expect_success 'compare diagnostic; ensure file is still here' ' + test_when_finished "git am --abort" && + test_must_fail git -c advice.amWorkDir=false am bad-patch.diff 2>actual && echo "error: git diff header lacks filename information (line 4)" >expected && test_path_is_file f && test_i18ncmp expected actual ' +test_expect_success "NUL in commit message's body" ' + test_when_finished "git am --abort" && + make_mbox_with_nul body >body.patch && + test_must_fail git am body.patch 2>err && + grep "a NUL byte in commit log message not allowed" err +' + +test_expect_success "NUL in commit message's header" " + test_when_finished 'git am --abort' && + make_mbox_with_nul subject >subject.patch && + test_must_fail git mailinfo msg patch <subject.patch 2>err && + grep \"a NUL byte in 'Subject' is not allowed\" err && + test_must_fail git am subject.patch 2>err && + grep \"a NUL byte in 'Subject' is not allowed\" err +" + test_done diff --git a/t/t4256-am-format-flowed.sh b/t/t4256-am-format-flowed.sh index 6340310e9a..2369c4e17a 100755 --- a/t/t4256-am-format-flowed.sh +++ b/t/t4256-am-format-flowed.sh @@ -11,7 +11,7 @@ test_expect_success 'setup' ' ' test_expect_success 'am with format=flowed' ' - git am <"$TEST_DIRECTORY/t4256/1/patch" >stdout 2>stderr && + git am <"$TEST_DIRECTORY/t4256/1/patch" 2>stderr && test_i18ngrep "warning: Patch sent with format=flowed" stderr && test_cmp "$TEST_DIRECTORY/t4256/1/mailinfo.c" mailinfo.c ' diff --git a/t/t4300-merge-tree.sh b/t/t4300-merge-tree.sh index d87cc7d9ef..e59601e5fe 100755 --- a/t/t4300-merge-tree.sh +++ b/t/t4300-merge-tree.sh @@ -11,16 +11,16 @@ test_expect_success setup ' ' test_expect_success 'file add A, !B' ' - cat >expected <<\EXPECTED && + git reset --hard initial && + test_commit "add-a-not-b" "ONE" "AAA" && + git merge-tree initial initial add-a-not-b >actual && + cat >expected <<EXPECTED && added in remote - their 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE + their 100644 $(git rev-parse HEAD:ONE) ONE @@ -0,0 +1 @@ +AAA EXPECTED - git reset --hard initial && - test_commit "add-a-not-b" "ONE" "AAA" && - git merge-tree initial initial add-a-not-b >actual && test_cmp expected actual ' @@ -41,10 +41,15 @@ test_expect_success 'file add A, B (same)' ' ' test_expect_success 'file add A, B (different)' ' - cat >expected <<\EXPECTED && + git reset --hard initial && + test_commit "add-a-b-diff-A" "ONE" "AAA" && + git reset --hard initial && + test_commit "add-a-b-diff-B" "ONE" "BBB" && + git merge-tree initial add-a-b-diff-A add-a-b-diff-B >actual && + cat >expected <<EXPECTED && added in both - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE - their 100644 ba629238ca89489f2b350e196ca445e09d8bb834 ONE + our 100644 $(git rev-parse add-a-b-diff-A:ONE) ONE + their 100644 $(git rev-parse add-a-b-diff-B:ONE) ONE @@ -1 +1,5 @@ +<<<<<<< .our AAA @@ -53,11 +58,6 @@ added in both +>>>>>>> .their EXPECTED - git reset --hard initial && - test_commit "add-a-b-diff-A" "ONE" "AAA" && - git reset --hard initial && - test_commit "add-a-b-diff-B" "ONE" "BBB" && - git merge-tree initial add-a-b-diff-A add-a-b-diff-B >actual && test_cmp expected actual ' @@ -69,18 +69,18 @@ test_expect_success 'file change A, !B' ' ' test_expect_success 'file change !A, B' ' - cat >expected <<\EXPECTED && + git reset --hard initial && + test_commit "change-not-a-b" "initial-file" "BBB" && + git merge-tree initial initial change-not-a-b >actual && + cat >expected <<EXPECTED && merged - result 100644 ba629238ca89489f2b350e196ca445e09d8bb834 initial-file - our 100644 e79c5e8f964493290a409888d5413a737e8e5dd5 initial-file + result 100644 $(git rev-parse change-a-not-b:initial-file) initial-file + our 100644 $(git rev-parse initial:initial-file ) initial-file @@ -1 +1 @@ -initial +BBB EXPECTED - git reset --hard initial && - test_commit "change-not-a-b" "initial-file" "BBB" && - git merge-tree initial initial change-not-a-b >actual && test_cmp expected actual ' @@ -94,11 +94,16 @@ test_expect_success 'file change A, B (same)' ' ' test_expect_success 'file change A, B (different)' ' - cat >expected <<\EXPECTED && + git reset --hard initial && + test_commit "change-a-b-diff-A" "initial-file" "AAA" && + git reset --hard initial && + test_commit "change-a-b-diff-B" "initial-file" "BBB" && + git merge-tree initial change-a-b-diff-A change-a-b-diff-B >actual && + cat >expected <<EXPECTED && changed in both - base 100644 e79c5e8f964493290a409888d5413a737e8e5dd5 initial-file - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d initial-file - their 100644 ba629238ca89489f2b350e196ca445e09d8bb834 initial-file + base 100644 $(git rev-parse initial:initial-file ) initial-file + our 100644 $(git rev-parse change-a-b-diff-A:initial-file) initial-file + their 100644 $(git rev-parse change-a-b-diff-B:initial-file) initial-file @@ -1 +1,5 @@ +<<<<<<< .our AAA @@ -107,34 +112,10 @@ changed in both +>>>>>>> .their EXPECTED - git reset --hard initial && - test_commit "change-a-b-diff-A" "initial-file" "AAA" && - git reset --hard initial && - test_commit "change-a-b-diff-B" "initial-file" "BBB" && - git merge-tree initial change-a-b-diff-A change-a-b-diff-B >actual && test_cmp expected actual ' test_expect_success 'file change A, B (mixed)' ' - cat >expected <<\EXPECTED && -changed in both - base 100644 f4f1f998c7776568c4ff38f516d77fef9399b5a7 ONE - our 100644 af14c2c3475337c73759d561ef70b59e5c731176 ONE - their 100644 372d761493f524d44d59bd24700c3bdf914c973c ONE -@@ -7,7 +7,11 @@ - AAA - AAA - AAA -+<<<<<<< .our - BBB -+======= -+CCC -+>>>>>>> .their - AAA - AAA - AAA -EXPECTED - git reset --hard initial && test_commit "change-a-b-mix-base" "ONE" " AAA @@ -159,6 +140,26 @@ AAA" && "$(sed -e "1{s/AAA/BBB/;}" -e "10{s/AAA/CCC/;}" <ONE)" && git merge-tree change-a-b-mix-base change-a-b-mix-A change-a-b-mix-B \ >actual && + + cat >expected <<EXPECTED && +changed in both + base 100644 $(git rev-parse change-a-b-mix-base:ONE) ONE + our 100644 $(git rev-parse change-a-b-mix-A:ONE ) ONE + their 100644 $(git rev-parse change-a-b-mix-B:ONE ) ONE +@@ -7,7 +7,11 @@ + AAA + AAA + AAA ++<<<<<<< .our + BBB ++======= ++CCC ++>>>>>>> .their + AAA + AAA + AAA +EXPECTED + test_cmp expected actual ' @@ -173,20 +174,20 @@ test_expect_success 'file remove A, !B' ' ' test_expect_success 'file remove !A, B' ' - cat >expected <<\EXPECTED && -removed in remote - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE -@@ -1 +0,0 @@ --AAA -EXPECTED - git reset --hard initial && test_commit "rm-not-a-b-base" "ONE" "AAA" && git rm ONE && git commit -m "rm-not-a-b" && git tag "rm-not-a-b" && git merge-tree rm-a-not-b-base rm-a-not-b-base rm-a-not-b >actual && + cat >expected <<EXPECTED && +removed in remote + base 100644 $(git rev-parse rm-a-not-b-base:ONE) ONE + our 100644 $(git rev-parse rm-a-not-b-base:ONE) ONE +@@ -1 +0,0 @@ +-AAA +EXPECTED + test_cmp expected actual ' @@ -201,14 +202,6 @@ test_expect_success 'file remove A, B (same)' ' ' test_expect_success 'file change A, remove B' ' - cat >expected <<\EXPECTED && -removed in remote - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE - our 100644 ba629238ca89489f2b350e196ca445e09d8bb834 ONE -@@ -1 +0,0 @@ --BBB -EXPECTED - git reset --hard initial && test_commit "change-a-rm-b-base" "ONE" "AAA" && test_commit "change-a-rm-b-A" "ONE" "BBB" && @@ -218,16 +211,18 @@ EXPECTED git tag "change-a-rm-b-B" && git merge-tree change-a-rm-b-base change-a-rm-b-A change-a-rm-b-B \ >actual && + cat >expected <<EXPECTED && +removed in remote + base 100644 $(git rev-parse change-a-rm-b-base:ONE) ONE + our 100644 $(git rev-parse change-a-rm-b-A:ONE ) ONE +@@ -1 +0,0 @@ +-BBB +EXPECTED + test_cmp expected actual ' test_expect_success 'file remove A, change B' ' - cat >expected <<\EXPECTED && -removed in local - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE - their 100644 ba629238ca89489f2b350e196ca445e09d8bb834 ONE -EXPECTED - git reset --hard initial && test_commit "rm-a-change-b-base" "ONE" "AAA" && @@ -238,6 +233,11 @@ EXPECTED test_commit "rm-a-change-b-B" "ONE" "BBB" && git merge-tree rm-a-change-b-base rm-a-change-b-A rm-a-change-b-B \ >actual && + cat >expected <<EXPECTED && +removed in local + base 100644 $(git rev-parse rm-a-change-b-base:ONE) ONE + their 100644 $(git rev-parse rm-a-change-b-B:ONE ) ONE +EXPECTED test_cmp expected actual ' @@ -250,10 +250,17 @@ test_expect_success 'tree add A, B (same)' ' ' test_expect_success 'tree add A, B (different)' ' - cat >expect <<-\EOF && + git reset --hard initial && + mkdir sub && + test_commit "add sub/file" "sub/file" "AAA" add-tree-a-b-A && + git reset --hard initial && + mkdir sub && + test_commit "add sub/file" "sub/file" "BBB" add-tree-a-b-B && + git merge-tree initial add-tree-a-b-A add-tree-a-b-B >actual && + cat >expect <<-EOF && added in both - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d sub/file - their 100644 ba629238ca89489f2b350e196ca445e09d8bb834 sub/file + our 100644 $(git rev-parse add-tree-a-b-A:sub/file) sub/file + their 100644 $(git rev-parse add-tree-a-b-B:sub/file) sub/file @@ -1 +1,5 @@ +<<<<<<< .our AAA @@ -261,24 +268,10 @@ test_expect_success 'tree add A, B (different)' ' +BBB +>>>>>>> .their EOF - git reset --hard initial && - mkdir sub && - test_commit "add sub/file" "sub/file" "AAA" add-tree-a-b-A && - git reset --hard initial && - mkdir sub && - test_commit "add sub/file" "sub/file" "BBB" add-tree-a-b-B && - git merge-tree initial add-tree-a-b-A add-tree-a-b-B >actual && test_cmp expect actual ' test_expect_success 'tree unchanged A, removed B' ' - cat >expect <<-\EOF && - removed in remote - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d sub/file - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d sub/file - @@ -1 +0,0 @@ - -AAA - EOF git reset --hard initial && mkdir sub && test_commit "add sub/file" "sub/file" "AAA" tree-remove-b-initial && @@ -287,6 +280,13 @@ test_expect_success 'tree unchanged A, removed B' ' git commit -m "remove sub/file" && git tag tree-remove-b-B && git merge-tree tree-remove-b-initial tree-remove-b-initial tree-remove-b-B >actual && + cat >expect <<-EOF && + removed in remote + base 100644 $(git rev-parse tree-remove-b-initial:sub/file) sub/file + our 100644 $(git rev-parse tree-remove-b-initial:sub/file) sub/file + @@ -1 +0,0 @@ + -AAA + EOF test_cmp expect actual ' @@ -296,14 +296,14 @@ test_expect_success 'turn file to tree' ' mkdir initial-file && test_commit "turn-file-to-tree" "initial-file/ONE" "CCC" && git merge-tree initial initial turn-file-to-tree >actual && - cat >expect <<-\EOF && + cat >expect <<-EOF && added in remote - their 100644 43aa4fdec31eb92e1fdc2f0ce6ea9ddb7c32bcf7 initial-file/ONE + their 100644 $(git rev-parse turn-file-to-tree:initial-file/ONE) initial-file/ONE @@ -0,0 +1 @@ +CCC removed in remote - base 100644 e79c5e8f964493290a409888d5413a737e8e5dd5 initial-file - our 100644 e79c5e8f964493290a409888d5413a737e8e5dd5 initial-file + base 100644 $(git rev-parse initial:initial-file) initial-file + our 100644 $(git rev-parse initial:initial-file) initial-file @@ -1 +0,0 @@ -initial EOF @@ -318,14 +318,14 @@ test_expect_success 'turn tree to file' ' rm -fr dir && test_commit "make-file" "dir" "CCC" && git merge-tree add-tree add-another-tree make-file >actual && - cat >expect <<-\EOF && + cat >expect <<-EOF && removed in remote - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d dir/path - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d dir/path + base 100644 $(git rev-parse add-tree:dir/path) dir/path + our 100644 $(git rev-parse add-tree:dir/path) dir/path @@ -1 +0,0 @@ -AAA added in remote - their 100644 43aa4fdec31eb92e1fdc2f0ce6ea9ddb7c32bcf7 dir + their 100644 $(git rev-parse make-file:dir) dir @@ -0,0 +1 @@ +CCC EOF diff --git a/t/t5003-archive-zip.sh b/t/t5003-archive-zip.sh index 106eddbd85..3b76d2eb65 100755 --- a/t/t5003-archive-zip.sh +++ b/t/t5003-archive-zip.sh @@ -7,12 +7,12 @@ test_description='git archive --format=zip test' SUBSTFORMAT=%H%n test_lazy_prereq UNZIP_SYMLINKS ' - ( - mkdir unzip-symlinks && - cd unzip-symlinks && - "$GIT_UNZIP" "$TEST_DIRECTORY"/t5003/infozip-symlinks.zip && - test -h symlink - ) + "$GIT_UNZIP" "$TEST_DIRECTORY"/t5003/infozip-symlinks.zip && + test -h symlink +' + +test_lazy_prereq UNZIP_CONVERT ' + "$GIT_UNZIP" -a "$TEST_DIRECTORY"/t5003/infozip-symlinks.zip ' check_zip() { @@ -39,33 +39,33 @@ check_zip() { extracted=${dir_with_prefix}a original=a - test_expect_success UNZIP " extract ZIP archive with EOL conversion" ' + test_expect_success UNZIP_CONVERT " extract ZIP archive with EOL conversion" ' (mkdir $dir && cd $dir && "$GIT_UNZIP" -a ../$zipfile) ' - test_expect_success UNZIP " validate that text files are converted" " + test_expect_success UNZIP_CONVERT " validate that text files are converted" " test_cmp_bin $extracted/text.cr $extracted/text.crlf && test_cmp_bin $extracted/text.cr $extracted/text.lf " - test_expect_success UNZIP " validate that binary files are unchanged" " + test_expect_success UNZIP_CONVERT " validate that binary files are unchanged" " test_cmp_bin $original/binary.cr $extracted/binary.cr && test_cmp_bin $original/binary.crlf $extracted/binary.crlf && test_cmp_bin $original/binary.lf $extracted/binary.lf " - test_expect_success UNZIP " validate that diff files are converted" " + test_expect_success UNZIP_CONVERT " validate that diff files are converted" " test_cmp_bin $extracted/diff.cr $extracted/diff.crlf && test_cmp_bin $extracted/diff.cr $extracted/diff.lf " - test_expect_success UNZIP " validate that -diff files are unchanged" " + test_expect_success UNZIP_CONVERT " validate that -diff files are unchanged" " test_cmp_bin $original/nodiff.cr $extracted/nodiff.cr && test_cmp_bin $original/nodiff.crlf $extracted/nodiff.crlf && test_cmp_bin $original/nodiff.lf $extracted/nodiff.lf " - test_expect_success UNZIP " validate that custom diff is unchanged " " + test_expect_success UNZIP_CONVERT " validate that custom diff is unchanged " " test_cmp_bin $original/custom.cr $extracted/custom.cr && test_cmp_bin $original/custom.crlf $extracted/custom.crlf && test_cmp_bin $original/custom.lf $extracted/custom.lf diff --git a/t/t5100-mailinfo.sh b/t/t5100-mailinfo.sh index 9690dcad4f..147e616533 100755 --- a/t/t5100-mailinfo.sh +++ b/t/t5100-mailinfo.sh @@ -213,4 +213,19 @@ test_expect_failure 'mailinfo -b separated double [PATCH]' ' test z"$subj" = z"Subject: [other] message" ' +test_expect_success 'mailinfo handles unusual header whitespace' ' + git mailinfo /dev/null /dev/null >actual <<-\EOF && + From:Real Name <user@example.com> + Subject: extra spaces + EOF + + cat >expect <<-\EOF && + Author: Real Name + Email: user@example.com + Subject: extra spaces + + EOF + test_cmp expect actual +' + test_done diff --git a/t/t5150-request-pull.sh b/t/t5150-request-pull.sh index 852dcd913f..c1811ea0f4 100755 --- a/t/t5150-request-pull.sh +++ b/t/t5150-request-pull.sh @@ -4,6 +4,12 @@ test_description='Test workflows involving pull request.' . ./test-lib.sh +if ! test_have_prereq PERL +then + skip_all='skipping request-pull tests, perl not available' + test_done +fi + test_expect_success 'setup' ' git init --bare upstream.git && @@ -144,7 +150,6 @@ test_expect_success 'pull request after push' ' git request-pull initial origin master:for-upstream >../request ) && sed -nf read-request.sed <request >digest && - cat digest && { read task && read repository && @@ -173,7 +178,6 @@ test_expect_success 'request asks HEAD to be pulled' ' git request-pull initial "$downstream_url" >../request ) && sed -nf read-request.sed <request >digest && - cat digest && { read task && read repository && diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index 91d51b35f9..ad07f2f7fc 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -6,9 +6,10 @@ test_description='pack index with 64-bit offsets and object CRC' . ./test-lib.sh -test_expect_success \ - 'setup' \ - 'rm -rf .git && +test_expect_success 'setup' ' + test_oid_init && + rawsz=$(test_oid rawsz) && + rm -rf .git && git init && git config pack.threads 1 && i=1 && @@ -32,7 +33,8 @@ test_expect_success \ echo $tree && git ls-tree $tree | sed -e "s/.* \\([0-9a-f]*\\) .*/\\1/" } >obj-list && - git update-ref HEAD $commit' + git update-ref HEAD $commit +' test_expect_success \ 'pack-objects with index version 1' \ @@ -157,10 +159,11 @@ test_expect_success \ offs_101=$(index_obj_offset 1.idx $sha1_101) && nr_099=$(index_obj_nr 1.idx $sha1_099) && chmod +w ".git/objects/pack/pack-${pack1}.pack" && + recordsz=$((rawsz + 4)) && dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($offs_101 + 1)) \ if=".git/objects/pack/pack-${pack1}.idx" \ - skip=$((4 + 256 * 4 + $nr_099 * 24)) \ - bs=1 count=20 conv=notrunc && + skip=$((4 + 256 * 4 + $nr_099 * recordsz)) \ + bs=1 count=$rawsz conv=notrunc && git cat-file blob $sha1_101 > file_101_foo1' test_expect_success \ @@ -200,8 +203,8 @@ test_expect_success \ chmod +w ".git/objects/pack/pack-${pack1}.pack" && dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($offs_101 + 1)) \ if=".git/objects/pack/pack-${pack1}.idx" \ - skip=$((8 + 256 * 4 + $nr_099 * 20)) \ - bs=1 count=20 conv=notrunc && + skip=$((8 + 256 * 4 + $nr_099 * rawsz)) \ + bs=1 count=$rawsz conv=notrunc && git cat-file blob $sha1_101 > file_101_foo2' test_expect_success \ @@ -226,7 +229,7 @@ test_expect_success \ nr=$(index_obj_nr ".git/objects/pack/pack-${pack1}.idx" $obj) && chmod +w ".git/objects/pack/pack-${pack1}.idx" && printf xxxx | dd of=".git/objects/pack/pack-${pack1}.idx" conv=notrunc \ - bs=1 count=4 seek=$((8 + 256 * 4 + $(wc -l <obj-list) * 20 + $nr * 4)) && + bs=1 count=4 seek=$((8 + 256 * 4 + $(wc -l <obj-list) * rawsz + $nr * 4)) && ( while read obj do git cat-file -p $obj >/dev/null || exit 1 done <obj-list ) && diff --git a/t/t5309-pack-delta-cycles.sh b/t/t5309-pack-delta-cycles.sh index 491556dad9..55b787630f 100755 --- a/t/t5309-pack-delta-cycles.sh +++ b/t/t5309-pack-delta-cycles.sh @@ -4,15 +4,9 @@ test_description='test index-pack handling of delta cycles in packfiles' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-pack.sh -if ! test_have_prereq SHA1 -then - skip_all='not using SHA-1 for objects' - test_done -fi - # Two similar-ish objects that we have computed deltas between. -A=01d7713666f4de822776c7622c10f1b07de280dc -B=e68fe8129b546b101aee9510c5328e7f21ca1d18 +A=$(test_oid packlib_7_0) +B=$(test_oid packlib_7_76) # double-check our hand-constucted packs test_expect_success 'index-pack works with a single delta (A->B)' ' @@ -62,13 +56,13 @@ test_expect_success 'index-pack detects REF_DELTA cycles' ' test_must_fail git index-pack --fix-thin --stdin <cycle.pack ' -test_expect_failure 'failover to an object in another pack' ' +test_expect_success 'failover to an object in another pack' ' clear_packs && git index-pack --stdin <ab.pack && - git index-pack --stdin --fix-thin <cycle.pack + test_must_fail git index-pack --stdin --fix-thin <cycle.pack ' -test_expect_failure 'failover to a duplicate object in the same pack' ' +test_expect_success 'failover to a duplicate object in the same pack' ' clear_packs && { pack_header 3 && @@ -77,7 +71,7 @@ test_expect_failure 'failover to a duplicate object in the same pack' ' pack_obj $A } >recoverable.pack && pack_trailer recoverable.pack && - git index-pack --fix-thin --stdin <recoverable.pack + test_must_fail git index-pack --fix-thin --stdin <recoverable.pack ' test_done diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index 6640329ebf..8318781d2b 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -74,16 +74,24 @@ rev_list_tests() { test_cmp expect actual ' - test_expect_success "enumerate --objects ($state)" ' - git rev-list --objects --use-bitmap-index HEAD >tmp && - cut -d" " -f1 <tmp >tmp2 && - sort <tmp2 >actual && - git rev-list --objects HEAD >tmp && - cut -d" " -f1 <tmp >tmp2 && - sort <tmp2 >expect && + test_expect_success "counting objects via bitmap ($state)" ' + git rev-list --count --objects HEAD >expect && + git rev-list --use-bitmap-index --count --objects HEAD >actual && test_cmp expect actual ' + test_expect_success "enumerate commits ($state)" ' + git rev-list --use-bitmap-index HEAD >actual && + git rev-list HEAD >expect && + test_bitmap_traversal --no-confirm-bitmaps expect actual + ' + + test_expect_success "enumerate --objects ($state)" ' + git rev-list --objects --use-bitmap-index HEAD >actual && + git rev-list --objects HEAD >expect && + test_bitmap_traversal expect actual + ' + test_expect_success "bitmap --objects handles non-commit objects ($state)" ' git rev-list --objects --use-bitmap-index HEAD tagged-blob >actual && grep $blob actual @@ -99,6 +107,20 @@ test_expect_success 'clone from bitmapped repository' ' test_cmp expect actual ' +test_expect_success 'partial clone from bitmapped repository' ' + test_config uploadpack.allowfilter true && + git clone --no-local --bare --filter=blob:none . partial-clone.git && + ( + cd partial-clone.git && + pack=$(echo objects/pack/*.pack) && + git verify-pack -v "$pack" >have && + awk "/blob/ { print \$1 }" <have >blobs && + # we expect this single blob because of the direct ref + git rev-parse refs/tags/tagged-blob >expect && + test_cmp expect blobs + ) +' + test_expect_success 'setup further non-bitmapped commits' ' test_commit_bulk --id=further 10 ' diff --git a/t/t5313-pack-bounds-checks.sh b/t/t5313-pack-bounds-checks.sh index f1708d415e..2a4557efc2 100755 --- a/t/t5313-pack-bounds-checks.sh +++ b/t/t5313-pack-bounds-checks.sh @@ -38,16 +38,27 @@ munge () { # for the initial, and another ofs(4*nr) past that for the extended. # ofs_table () { - echo $((4 + 4 + 4*256 + 20*$1 + 4*$1)) + echo $((4 + 4 + 4*256 + $(test_oid rawsz)*$1 + 4*$1)) } extended_table () { echo $(($(ofs_table "$1") + 4*$1)) } +test_expect_success 'setup' ' + test_oid_init && + test_oid_cache <<-EOF + oid000 sha1:1485 + oid000 sha256:4222 + + oidfff sha1:74 + oidfff sha256:1350 + EOF +' + test_expect_success 'set up base packfile and variables' ' # the hash of this content starts with ff, which # makes some later computations much simpler - echo 74 >file && + echo $(test_oid oidfff) >file && git add file && git commit -m base && git repack -ad && @@ -140,10 +151,10 @@ test_expect_success 'bogus offset inside v2 extended table' ' # an extended table (if the first object were larger than 2^31). # # Note that the value is important here. We want $object as - # the second entry in sorted-sha1 order. The sha1 of 1485 starts + # the second entry in sorted-hash order. The hash of this object starts # with "000", which sorts before that of $object (which starts # with "fff"). - second=$(echo 1485 | git hash-object -w --stdin) && + second=$(test_oid oid000 | git hash-object -w --stdin) && do_pack "$object $second" --index-version=2 && # We have to make extra room for the table, so we cannot diff --git a/t/t5314-pack-cycle-detection.sh b/t/t5314-pack-cycle-detection.sh index e525466de0..0aec8619e2 100755 --- a/t/t5314-pack-cycle-detection.sh +++ b/t/t5314-pack-cycle-detection.sh @@ -53,7 +53,7 @@ immediately after the lookup for "dummy". -# Create a pack containing the the tree $1 and blob $1:file, with +# Create a pack containing the tree $1 and blob $1:file, with # the latter stored as a delta against $2:file. # # We convince pack-objects to make the delta in the direction of our choosing diff --git a/t/t5317-pack-objects-filter-objects.sh b/t/t5317-pack-objects-filter-objects.sh index 2d2f5d0229..dc0446574b 100755 --- a/t/t5317-pack-objects-filter-objects.sh +++ b/t/t5317-pack-objects-filter-objects.sh @@ -45,12 +45,7 @@ test_expect_success 'verify blob:none packfile has no blobs' ' git -C r1 index-pack ../filter.pack && git -C r1 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - nr=$(wc -l <observed) && - test 0 -eq $nr + ! grep blob verify_result ' test_expect_success 'verify normal and blob:none packfiles have same commits/trees' ' @@ -72,7 +67,8 @@ test_expect_success 'get an error for missing tree object' ' echo foo >r5/foo && git -C r5 add foo && git -C r5 commit -m "foo" && - del=$(git -C r5 rev-parse HEAD^{tree} | sed "s|..|&/|") && + git -C r5 rev-parse HEAD^{tree} >tree && + del=$(sed "s|..|&/|" tree) && rm r5/.git/objects/$del && test_must_fail git -C r5 pack-objects --revs --stdout 2>bad_tree <<-EOF && HEAD @@ -148,12 +144,7 @@ test_expect_success 'verify blob:limit=500 omits all blobs' ' git -C r2 index-pack ../filter.pack && git -C r2 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - nr=$(wc -l <observed) && - test 0 -eq $nr + ! grep blob verify_result ' test_expect_success 'verify blob:limit=1000' ' @@ -163,12 +154,7 @@ test_expect_success 'verify blob:limit=1000' ' git -C r2 index-pack ../filter.pack && git -C r2 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - nr=$(wc -l <observed) && - test 0 -eq $nr + ! grep blob verify_result ' test_expect_success 'verify blob:limit=1001' ' @@ -230,10 +216,9 @@ test_expect_success 'verify explicitly specifying oversized blob in input' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --revs --stdout --filter=blob:limit=1k >filter.pack <<-EOF && - HEAD - $(git -C r2 rev-parse HEAD:large.10000) - EOF + echo HEAD >objects && + git -C r2 rev-parse HEAD:large.10000 >>objects && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1k <objects >filter.pack && git -C r2 index-pack ../filter.pack && git -C r2 verify-pack -v ../filter.pack >verify_result && @@ -377,7 +362,8 @@ test_expect_success 'verify sparse:oid=OID' ' awk -f print_2.awk ls_files_result | sort >expected && - oid=$(git -C r4 ls-files -s pattern | awk -f print_2.awk) && + git -C r4 ls-files -s pattern >staged && + oid=$(awk -f print_2.awk staged) && git -C r4 pack-objects --revs --stdout --filter=sparse:oid=$oid >filter.pack <<-EOF && HEAD EOF diff --git a/t/t5318-commit-graph.sh b/t/t5318-commit-graph.sh index d42b3efe39..a79c624875 100755 --- a/t/t5318-commit-graph.sh +++ b/t/t5318-commit-graph.sh @@ -3,6 +3,8 @@ test_description='commit graph' . ./test-lib.sh +GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=0 + test_expect_success 'setup full repo' ' mkdir full && cd "$TRASH_DIRECTORY/full" && @@ -12,6 +14,10 @@ test_expect_success 'setup full repo' ' test_oid_init ' +test_expect_success POSIXPERM 'tweak umask for modebit tests' ' + umask 022 +' + test_expect_success 'verify graph with no graph file' ' cd "$TRASH_DIRECTORY/full" && git commit-graph verify @@ -19,8 +25,8 @@ test_expect_success 'verify graph with no graph file' ' test_expect_success 'write graph with no packs' ' cd "$TRASH_DIRECTORY/full" && - git commit-graph write --object-dir . && - test_path_is_missing info/commit-graph + git commit-graph write --object-dir $objdir && + test_path_is_missing $objdir/info/commit-graph ' test_expect_success 'exit with correct error on bad input to --stdin-packs' ' @@ -40,15 +46,6 @@ test_expect_success 'create commits and repack' ' git repack ' -test_expect_success 'exit with correct error on bad input to --stdin-commits' ' - cd "$TRASH_DIRECTORY/full" && - echo HEAD | test_expect_code 1 git commit-graph write --stdin-commits 2>stderr && - test_i18ngrep "invalid commit object id" stderr && - # valid tree OID, but not a commit OID - git rev-parse HEAD^{tree} | test_expect_code 1 git commit-graph write --stdin-commits 2>stderr && - test_i18ngrep "invalid commit object id" stderr -' - graph_git_two_modes() { git -c core.commitGraph=true $1 >output git -c core.commitGraph=false $1 >expect @@ -85,10 +82,26 @@ graph_read_expect() { num_commits: $1 chunks: oid_fanout oid_lookup commit_metadata$OPTIONAL EOF - git commit-graph read >output && + test-tool read-graph >output && test_cmp expect output } +test_expect_success 'exit with correct error on bad input to --stdin-commits' ' + cd "$TRASH_DIRECTORY/full" && + # invalid, non-hex OID + echo HEAD >in && + test_expect_code 1 git commit-graph write --stdin-commits <in 2>stderr && + test_i18ngrep "unexpected non-hex object ID: HEAD" stderr && + # non-existent OID + echo $ZERO_OID >in && + test_expect_code 1 git commit-graph write --stdin-commits <in 2>stderr && + test_i18ngrep "invalid object" stderr && + # valid commit and tree OID + git rev-parse HEAD HEAD^{tree} >in && + git commit-graph write --stdin-commits <in && + graph_read_expect 3 +' + test_expect_success 'write graph' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write && @@ -96,6 +109,13 @@ test_expect_success 'write graph' ' graph_read_expect "3" ' +test_expect_success POSIXPERM 'write graph has correct permissions' ' + test_path_is_file $objdir/info/commit-graph && + echo "-r--r--r--" >expect && + test_modebits $objdir/info/commit-graph >actual && + test_cmp expect actual +' + graph_git_behavior 'graph exists' full commits/3 commits/1 test_expect_success 'Add more commits' ' @@ -132,7 +152,7 @@ test_expect_success 'commit-graph write progress off for redirected stderr' ' test_expect_success 'commit-graph write force progress on for stderr' ' cd "$TRASH_DIRECTORY/full" && - git commit-graph write --progress 2>err && + GIT_PROGRESS_DELAY=0 git commit-graph write --progress 2>err && test_file_not_empty err ' @@ -150,7 +170,7 @@ test_expect_success 'commit-graph verify progress off for redirected stderr' ' test_expect_success 'commit-graph verify force progress on for stderr' ' cd "$TRASH_DIRECTORY/full" && - git commit-graph verify --progress 2>err && + GIT_PROGRESS_DELAY=0 git commit-graph verify --progress 2>err && test_file_not_empty err ' @@ -421,7 +441,8 @@ GRAPH_BYTE_FOOTER=$(($GRAPH_OCTOPUS_DATA_OFFSET + 4 * $NUM_OCTOPUS_EDGES)) corrupt_graph_setup() { cd "$TRASH_DIRECTORY/full" && test_when_finished mv commit-graph-backup $objdir/info/commit-graph && - cp $objdir/info/commit-graph commit-graph-backup + cp $objdir/info/commit-graph commit-graph-backup && + chmod u+w $objdir/info/commit-graph } corrupt_graph_verify() { @@ -435,6 +456,7 @@ corrupt_graph_verify() { fi && git status --short && GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD=true git commit-graph write && + chmod u+w $objdir/info/commit-graph && git commit-graph verify } @@ -481,7 +503,7 @@ test_expect_success 'detect bad version' ' ' test_expect_success 'detect bad hash version' ' - corrupt_graph_and_verify $GRAPH_BYTE_HASH "\02" \ + corrupt_graph_and_verify $GRAPH_BYTE_HASH "\03" \ "hash version" ' @@ -629,7 +651,7 @@ test_expect_success 'corrupt commit-graph write (broken parent)' ' empty="$(git mktree </dev/null)" && cat >broken <<-EOF && tree $empty - parent 0000000000000000000000000000000000000000 + parent $ZERO_OID author whatever <whatever@example.com> 1234 -0000 committer whatever <whatever@example.com> 1234 -0000 @@ -650,7 +672,7 @@ test_expect_success 'corrupt commit-graph write (missing tree)' ' cd repo && tree="$(git mktree </dev/null)" && cat >broken <<-EOF && - parent 0000000000000000000000000000000000000000 + parent $ZERO_OID author whatever <whatever@example.com> 1234 -0000 committer whatever <whatever@example.com> 1234 -0000 @@ -660,7 +682,7 @@ test_expect_success 'corrupt commit-graph write (missing tree)' ' git commit-tree -p "$broken" -m "good" "$tree" >good && test_must_fail git commit-graph write --stdin-commits \ <good 2>test_err && - test_i18ngrep "unable to get tree for" test_err + test_i18ngrep "unable to parse commit" test_err ) ' diff --git a/t/t5319-multi-pack-index.sh b/t/t5319-multi-pack-index.sh index c72ca04399..7214cab36c 100755 --- a/t/t5319-multi-pack-index.sh +++ b/t/t5319-multi-pack-index.sh @@ -28,10 +28,29 @@ midx_read_expect () { test_cmp expect actual } -test_expect_success 'write midx with no packs' ' - test_when_finished rm -f pack/multi-pack-index && - git multi-pack-index --object-dir=. write && - midx_read_expect 0 0 4 . +test_expect_success 'setup' ' + test_oid_init && + test_oid_cache <<-EOF + idxoff sha1:2999 + idxoff sha256:3739 + + packnameoff sha1:652 + packnameoff sha256:940 + + fanoutoff sha1:1 + fanoutoff sha256:3 + EOF +' + +test_expect_success "don't write midx with no packs" ' + test_must_fail git multi-pack-index --object-dir=. write && + test_path_is_missing pack/multi-pack-index +' + +test_expect_success "Warn if a midx contains no oid" ' + cp "$TEST_DIRECTORY"/t5319/no-objects.midx $objdir/pack/multi-pack-index && + test_must_fail git multi-pack-index verify && + rm $objdir/pack/multi-pack-index ' generate_objects () { @@ -147,6 +166,21 @@ test_expect_success 'write midx with two packs' ' compare_results_with_midx "two packs" +test_expect_success 'write progress off for redirected stderr' ' + git multi-pack-index --object-dir=$objdir write 2>err && + test_line_count = 0 err +' + +test_expect_success 'write force progress on for stderr' ' + git multi-pack-index --object-dir=$objdir --progress write 2>err && + test_file_not_empty err +' + +test_expect_success 'write with the --no-progress option' ' + git multi-pack-index --object-dir=$objdir --no-progress write 2>err && + test_line_count = 0 err +' + test_expect_success 'add more packs' ' for j in $(test_seq 11 20) do @@ -169,6 +203,21 @@ test_expect_success 'verify multi-pack-index success' ' git multi-pack-index verify --object-dir=$objdir ' +test_expect_success 'verify progress off for redirected stderr' ' + git multi-pack-index verify --object-dir=$objdir 2>err && + test_line_count = 0 err +' + +test_expect_success 'verify force progress on for stderr' ' + git multi-pack-index verify --object-dir=$objdir --progress 2>err && + test_file_not_empty err +' + +test_expect_success 'verify with the --no-progress option' ' + git multi-pack-index verify --object-dir=$objdir --no-progress 2>err && + test_line_count = 0 err +' + # usage: corrupt_midx_and_verify <pos> <data> <objdir> <string> corrupt_midx_and_verify() { POS=$1 && @@ -195,7 +244,7 @@ test_expect_success 'verify bad signature' ' "multi-pack-index signature" ' -HASH_LEN=20 +HASH_LEN=$(test_oid rawsz) NUM_OBJECTS=74 MIDX_BYTE_VERSION=4 MIDX_BYTE_OID_VERSION=5 @@ -208,9 +257,9 @@ MIDX_CHUNK_LOOKUP_WIDTH=12 MIDX_OFFSET_PACKNAMES=$(($MIDX_HEADER_SIZE + \ $MIDX_NUM_CHUNKS * $MIDX_CHUNK_LOOKUP_WIDTH)) MIDX_BYTE_PACKNAME_ORDER=$(($MIDX_OFFSET_PACKNAMES + 2)) -MIDX_OFFSET_OID_FANOUT=$(($MIDX_OFFSET_PACKNAMES + 652)) +MIDX_OFFSET_OID_FANOUT=$(($MIDX_OFFSET_PACKNAMES + $(test_oid packnameoff))) MIDX_OID_FANOUT_WIDTH=4 -MIDX_BYTE_OID_FANOUT_ORDER=$((MIDX_OFFSET_OID_FANOUT + 250 * $MIDX_OID_FANOUT_WIDTH + 1)) +MIDX_BYTE_OID_FANOUT_ORDER=$((MIDX_OFFSET_OID_FANOUT + 250 * $MIDX_OID_FANOUT_WIDTH + $(test_oid fanoutoff))) MIDX_OFFSET_OID_LOOKUP=$(($MIDX_OFFSET_OID_FANOUT + 256 * $MIDX_OID_FANOUT_WIDTH)) MIDX_BYTE_OID_LOOKUP=$(($MIDX_OFFSET_OID_LOOKUP + 16 * $HASH_LEN)) MIDX_OFFSET_OBJECT_OFFSETS=$(($MIDX_OFFSET_OID_LOOKUP + $NUM_OBJECTS * $HASH_LEN)) @@ -274,16 +323,31 @@ test_expect_success 'verify incorrect pack-int-id' ' ' test_expect_success 'verify incorrect offset' ' - corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\07" $objdir \ + corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\377" $objdir \ "incorrect object offset" ' test_expect_success 'git-fsck incorrect offset' ' - corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\07" $objdir \ + corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\377" $objdir \ "incorrect object offset" \ "git -c core.multipackindex=true fsck" ' +test_expect_success 'repack progress off for redirected stderr' ' + git multi-pack-index --object-dir=$objdir repack 2>err && + test_line_count = 0 err +' + +test_expect_success 'repack force progress on for stderr' ' + git multi-pack-index --object-dir=$objdir --progress repack 2>err && + test_file_not_empty err +' + +test_expect_success 'repack with the --no-progress option' ' + git multi-pack-index --object-dir=$objdir --no-progress repack 2>err && + test_line_count = 0 err +' + test_expect_success 'repack removes multi-pack-index' ' test_path_is_file $objdir/pack/multi-pack-index && GIT_TEST_MULTI_PACK_INDEX=0 git repack -adf && @@ -342,7 +406,7 @@ test_expect_success 'force some 64-bit offsets with pack-objects' ' pack64=$(git pack-objects --index-version=2,0x40 objects64/pack/test-64 <obj-list) && idx64=objects64/pack/test-64-$pack64.idx && chmod u+w $idx64 && - corrupt_data $idx64 2999 "\02" && + corrupt_data $idx64 $(test_oid idxoff) "\02" && midx64=$(git multi-pack-index --object-dir=objects64 write) && midx_read_expect 1 63 5 objects64 " large-offsets" ' @@ -413,6 +477,30 @@ test_expect_success 'expire does not remove any packs' ' ) ' +test_expect_success 'expire progress off for redirected stderr' ' + ( + cd dup && + git multi-pack-index expire 2>err && + test_line_count = 0 err + ) +' + +test_expect_success 'expire force progress on for stderr' ' + ( + cd dup && + git multi-pack-index --progress expire 2>err && + test_file_not_empty err + ) +' + +test_expect_success 'expire with the --no-progress option' ' + ( + cd dup && + git multi-pack-index --no-progress expire 2>err && + test_line_count = 0 err + ) +' + test_expect_success 'expire removes unreferenced packs' ' ( cd dup && @@ -438,10 +526,10 @@ test_expect_success 'repack with minimum size does not alter existing packs' ' cd dup && rm -rf .git/objects/pack && mv .git/objects/pack-backup .git/objects/pack && - touch -m -t 201901010000 .git/objects/pack/pack-D* && - touch -m -t 201901010001 .git/objects/pack/pack-C* && - touch -m -t 201901010002 .git/objects/pack/pack-B* && - touch -m -t 201901010003 .git/objects/pack/pack-A* && + test-tool chmtime =-5 .git/objects/pack/pack-D* && + test-tool chmtime =-4 .git/objects/pack/pack-C* && + test-tool chmtime =-3 .git/objects/pack/pack-B* && + test-tool chmtime =-2 .git/objects/pack/pack-A* && ls .git/objects/pack >expect && MINSIZE=$(test-tool path-utils file-size .git/objects/pack/*pack | sort -n | head -n 1) && git multi-pack-index repack --batch-size=$MINSIZE && @@ -450,6 +538,33 @@ test_expect_success 'repack with minimum size does not alter existing packs' ' ) ' +test_expect_success 'repack respects repack.packKeptObjects=false' ' + test_when_finished rm -f dup/.git/objects/pack/*keep && + ( + cd dup && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 5 idx-list && + ls .git/objects/pack/*.pack | sed "s/\.pack/.keep/" >keep-list && + test_line_count = 5 keep-list && + for keep in $(cat keep-list) + do + touch $keep || return 1 + done && + git multi-pack-index repack --batch-size=0 && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 5 idx-list && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 5 midx-list && + THIRD_SMALLEST_SIZE=$(test-tool path-utils file-size .git/objects/pack/*pack | sort -n | sed -n 3p) && + BATCH_SIZE=$((THIRD_SMALLEST_SIZE + 1)) && + git multi-pack-index repack --batch-size=$BATCH_SIZE && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 5 idx-list && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 5 midx-list + ) +' + test_expect_success 'repack creates a new pack' ' ( cd dup && diff --git a/t/t5319/no-objects.midx b/t/t5319/no-objects.midx Binary files differnew file mode 100644 index 0000000000..e466b8e086 --- /dev/null +++ b/t/t5319/no-objects.midx diff --git a/t/t5321-pack-large-objects.sh b/t/t5321-pack-large-objects.sh index a75eab87d3..8a56d98a0e 100755 --- a/t/t5321-pack-large-objects.sh +++ b/t/t5321-pack-large-objects.sh @@ -10,8 +10,8 @@ test_description='git pack-object with "large" deltas . "$TEST_DIRECTORY"/lib-pack.sh # Two similar-ish objects that we have computed deltas between. -A=01d7713666f4de822776c7622c10f1b07de280dc -B=e68fe8129b546b101aee9510c5328e7f21ca1d18 +A=$(test_oid packlib_7_0) +B=$(test_oid packlib_7_76) test_expect_success 'setup' ' clear_packs && diff --git a/t/t5322-pack-objects-sparse.sh b/t/t5322-pack-objects-sparse.sh index 7124b5581a..a581eaf529 100755 --- a/t/t5322-pack-objects-sparse.sh +++ b/t/t5322-pack-objects-sparse.sh @@ -105,14 +105,16 @@ test_expect_success 'non-sparse pack-objects' ' test_cmp required_objects.txt nonsparse_required_objects.txt ' +# --sparse is enabled by default by pack.useSparse test_expect_success 'sparse pack-objects' ' + GIT_TEST_PACK_SPARSE=-1 && git rev-parse \ topic1 \ topic1^{tree} \ topic1:f3 \ topic1:f3/f4 \ topic1:f3/f4/data.txt | sort >expect_sparse_objects.txt && - git pack-objects --stdout --revs --sparse <packinput.txt >sparse.pack && + git pack-objects --stdout --revs <packinput.txt >sparse.pack && git index-pack -o sparse.idx sparse.pack && git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && test_cmp expect_sparse_objects.txt sparse_objects.txt diff --git a/t/t5324-split-commit-graph.sh b/t/t5324-split-commit-graph.sh index 115aabd141..269d0964a3 100755 --- a/t/t5324-split-commit-graph.sh +++ b/t/t5324-split-commit-graph.sh @@ -4,6 +4,7 @@ test_description='split commit graph' . ./test-lib.sh GIT_TEST_COMMIT_GRAPH=0 +GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=0 test_expect_success 'setup repo' ' git init && @@ -11,7 +12,14 @@ test_expect_success 'setup repo' ' git config gc.writeCommitGraph false && infodir=".git/objects/info" && graphdir="$infodir/commit-graphs" && - test_oid_init + test_oid_init && + test_oid_cache <<-EOM + shallow sha1:1760 + shallow sha256:2064 + + base sha1:1376 + base sha256:1496 + EOM ' graph_read_expect() { @@ -25,10 +33,14 @@ graph_read_expect() { num_commits: $1 chunks: oid_fanout oid_lookup commit_metadata EOF - git commit-graph read >output && + test-tool read-graph >output && test_cmp expect output } +test_expect_success POSIXPERM 'tweak umask for modebit tests' ' + umask 022 +' + test_expect_success 'create commits and write commit-graph' ' for i in $(test_seq 3) do @@ -203,8 +215,14 @@ test_expect_success 'test merge stragety constants' ' git config core.commitGraph true && test_line_count = 2 $graphdir/commit-graph-chain && test_commit 15 && - git commit-graph write --reachable --split --size-multiple=10 --expire-time=1980-01-01 && + touch $graphdir/to-delete.graph $graphdir/to-keep.graph && + test-tool chmtime =1546362000 $graphdir/to-delete.graph && + test-tool chmtime =1546362001 $graphdir/to-keep.graph && + git commit-graph write --reachable --split --size-multiple=10 \ + --expire-time="2019-01-01 12:00 -05:00" && test_line_count = 1 $graphdir/commit-graph-chain && + test_path_is_missing $graphdir/to-delete.graph && + test_path_is_file $graphdir/to-keep.graph && ls $graphdir/graph-*.graph >graph-files && test_line_count = 3 graph-files ) && @@ -248,7 +266,7 @@ test_expect_success 'verify hashes along chain, even in shallow' ' cd verify && git commit-graph verify && base_file=$graphdir/graph-$(head -n 1 $graphdir/commit-graph-chain).graph && - corrupt_file "$base_file" 1760 "\01" && + corrupt_file "$base_file" $(test_oid shallow) "\01" && test_must_fail git commit-graph verify --shallow 2>test_err && grep -v "^+" test_err >err && test_i18ngrep "incorrect checksum" err @@ -275,7 +293,7 @@ test_expect_success 'warn on base graph chunk incorrect' ' cd base-chunk && git commit-graph verify && base_file=$graphdir/graph-$(tail -n 1 $graphdir/commit-graph-chain).graph && - corrupt_file "$base_file" 1376 "\01" && + corrupt_file "$base_file" $(test_oid base) "\01" && git commit-graph verify --shallow 2>test_err && grep -v "^+" test_err >err && test_i18ngrep "commit-graph chain does not match" err @@ -344,4 +362,67 @@ test_expect_success 'split across alternate where alternate is not split' ' test_cmp commit-graph .git/objects/info/commit-graph ' +test_expect_success '--split=no-merge always writes an incremental' ' + test_when_finished rm -rf a b && + rm -rf $graphdir $infodir/commit-graph && + git reset --hard commits/2 && + git rev-list HEAD~1 >a && + git rev-list HEAD >b && + git commit-graph write --split --stdin-commits <a && + git commit-graph write --split=no-merge --stdin-commits <b && + test_line_count = 2 $graphdir/commit-graph-chain +' + +test_expect_success '--split=replace replaces the chain' ' + rm -rf $graphdir $infodir/commit-graph && + git reset --hard commits/3 && + git rev-list -1 HEAD~2 >a && + git rev-list -1 HEAD~1 >b && + git rev-list -1 HEAD >c && + git commit-graph write --split=no-merge --stdin-commits <a && + git commit-graph write --split=no-merge --stdin-commits <b && + git commit-graph write --split=no-merge --stdin-commits <c && + test_line_count = 3 $graphdir/commit-graph-chain && + git commit-graph write --stdin-commits --split=replace <b && + test_path_is_missing $infodir/commit-graph && + test_path_is_file $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files && + verify_chain_files_exist $graphdir && + graph_read_expect 2 +' + +test_expect_success ULIMIT_FILE_DESCRIPTORS 'handles file descriptor exhaustion' ' + git init ulimit && + ( + cd ulimit && + for i in $(test_seq 64) + do + test_commit $i && + test_might_fail run_with_limited_open_files git commit-graph write \ + --split=no-merge --reachable || return 1 + done + ) +' + +while read mode modebits +do + test_expect_success POSIXPERM "split commit-graph respects core.sharedrepository $mode" ' + rm -rf $graphdir $infodir/commit-graph && + git reset --hard commits/1 && + test_config core.sharedrepository "$mode" && + git commit-graph write --split --reachable && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files && + echo "$modebits" >expect && + test_modebits $graphdir/graph-*.graph >actual && + test_cmp expect actual && + test_modebits $graphdir/commit-graph-chain >actual && + test_cmp expect actual + ' +done <<\EOF +0666 -r--r--r-- +0600 -r-------- +EOF + test_done diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index 571d620aed..b84618c925 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -288,7 +288,7 @@ test_expect_success 'receive-pack de-dupes .have lines' ' $shared .have EOF - GIT_TRACE_PACKET=$(pwd)/trace GIT_TEST_PROTOCOL_VERSION= \ + GIT_TRACE_PACKET=$(pwd)/trace GIT_TEST_PROTOCOL_VERSION=0 \ git push \ --receive-pack="unset GIT_TRACE_PACKET; git-receive-pack" \ fork HEAD:foo && diff --git a/t/t5407-post-rewrite-hook.sh b/t/t5407-post-rewrite-hook.sh index 7344253bfb..80750a817e 100755 --- a/t/t5407-post-rewrite-hook.sh +++ b/t/t5407-post-rewrite-hook.sh @@ -53,10 +53,10 @@ test_expect_success 'git commit --amend --no-post-rewrite' ' test ! -f post-rewrite.data ' -test_expect_success 'git rebase' ' +test_expect_success 'git rebase --apply' ' git reset --hard D && clear_hook_input && - test_must_fail git rebase --onto A B && + test_must_fail git rebase --apply --onto A B && echo C > foo && git add foo && git rebase --continue && @@ -68,10 +68,10 @@ test_expect_success 'git rebase' ' verify_hook_input ' -test_expect_success 'git rebase --skip' ' +test_expect_success 'git rebase --apply --skip' ' git reset --hard D && clear_hook_input && - test_must_fail git rebase --onto A B && + test_must_fail git rebase --apply --onto A B && test_must_fail git rebase --skip && echo D > foo && git add foo && @@ -84,10 +84,10 @@ test_expect_success 'git rebase --skip' ' verify_hook_input ' -test_expect_success 'git rebase --skip the last one' ' +test_expect_success 'git rebase --apply --skip the last one' ' git reset --hard F && clear_hook_input && - test_must_fail git rebase --onto D A && + test_must_fail git rebase --apply --onto D A && git rebase --skip && echo rebase >expected.args && cat >expected.data <<-EOF && @@ -128,7 +128,7 @@ test_expect_success 'git rebase -m --skip' ' verify_hook_input ' -test_expect_success 'git rebase with implicit use of interactive backend' ' +test_expect_success 'git rebase with implicit use of merge backend' ' git reset --hard D && clear_hook_input && test_must_fail git rebase --keep-empty --onto A B && @@ -143,7 +143,7 @@ test_expect_success 'git rebase with implicit use of interactive backend' ' verify_hook_input ' -test_expect_success 'git rebase --skip with implicit use of interactive backend' ' +test_expect_success 'git rebase --skip with implicit use of merge backend' ' git reset --hard D && clear_hook_input && test_must_fail git rebase --keep-empty --onto A B && diff --git a/t/t5409-colorize-remote-messages.sh b/t/t5409-colorize-remote-messages.sh index 2a8c449661..5d8f401d8e 100755 --- a/t/t5409-colorize-remote-messages.sh +++ b/t/t5409-colorize-remote-messages.sh @@ -56,14 +56,13 @@ test_expect_success 'short line' ' test_expect_success 'case-insensitive' ' git --git-dir child/.git -c color.remote=always push -f origin HEAD:refs/heads/case-insensitive 2>output && - cat output && test_decode_color <output >decoded && grep "<BOLD;RED>error<RESET>: error" decoded && grep "<BOLD;RED>ERROR<RESET>: also highlighted" decoded ' test_expect_success 'leading space' ' - git --git-dir child/.git -c color.remote=always push -f origin HEAD:refs/heads/leading-space 2>output && cat output && + git --git-dir child/.git -c color.remote=always push -f origin HEAD:refs/heads/leading-space 2>output && test_decode_color <output >decoded && grep " <BOLD;RED>error<RESET>: leading space" decoded ' diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 6b97923964..8c54e34ef1 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -385,6 +385,54 @@ test_expect_success 'clone shallow with packed refs' ' test_cmp count8.expected count8.actual ' +test_expect_success 'in_vain not triggered before first ACK' ' + rm -rf myserver myclient && + git init myserver && + test_commit -C myserver foo && + git clone "file://$(pwd)/myserver" myclient && + + # MAX_IN_VAIN is 256. Because of batching, the client will send 496 + # (16+32+64+128+256) commits, not 256, before giving up. So create 496 + # irrelevant commits. + test_commit_bulk -C myclient 496 && + + # The new commit that the client wants to fetch. + test_commit -C myserver bar && + + git -C myclient fetch --progress origin 2>log && + test_i18ngrep "remote: Total 3 " log +' + +test_expect_success 'in_vain resetted upon ACK' ' + rm -rf myserver myclient && + git init myserver && + + # Linked list of commits on master. The first is common; the rest are + # not. + test_commit -C myserver first_master_commit && + git clone "file://$(pwd)/myserver" myclient && + test_commit_bulk -C myclient 255 && + + # Another linked list of commits on anotherbranch with no connection to + # master. The first is common; the rest are not. + git -C myserver checkout --orphan anotherbranch && + test_commit -C myserver first_anotherbranch_commit && + git -C myclient fetch origin anotherbranch:refs/heads/anotherbranch && + git -C myclient checkout anotherbranch && + test_commit_bulk -C myclient 255 && + + # The new commit that the client wants to fetch. + git -C myserver checkout master && + test_commit -C myserver to_fetch && + + # The client will send (as "have"s) all 256 commits in anotherbranch + # first. The 256th commit is common between the client and the server, + # and should reset in_vain. This allows negotiation to continue until + # the client reports that first_anotherbranch_commit is common. + git -C myclient fetch --progress origin master 2>log && + test_i18ngrep "Total 3 " log +' + test_expect_success 'fetch in shallow repo unreachable shallow objects' ' ( git clone --bare --branch B --single-branch "file://$(pwd)/." no-reflog && @@ -440,11 +488,12 @@ test_expect_success 'setup tests for the --stdin parameter' ' ' test_expect_success 'setup fetch refs from cmdline v[12]' ' + cp -r client client0 && cp -r client client1 && cp -r client client2 ' -for version in '' 1 2 +for version in '' 0 1 2 do test_expect_success "protocol.version=$version fetch refs from cmdline" " ( @@ -638,7 +687,7 @@ test_expect_success 'fetch-pack cannot fetch a raw sha1 that is not advertised a git init client && # Some protocol versions (e.g. 2) support fetching # unadvertised objects, so restrict this test to v0. - test_must_fail env GIT_TEST_PROTOCOL_VERSION= git -C client fetch-pack ../server \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 git -C client fetch-pack ../server \ $(git -C server rev-parse refs/heads/master^) 2>err && test_i18ngrep "Server does not allow request for unadvertised object" err ' @@ -917,7 +966,10 @@ test_expect_success 'filtering by size' ' git -C client fetch-pack --filter=blob:limit=0 ../server HEAD && # Ensure that object is not inadvertently fetched - test_must_fail git -C client cat-file -e $(git hash-object server/one.t) + commit=$(git -C server rev-parse HEAD) && + blob=$(git hash-object server/one.t) && + git -C client rev-list --objects --missing=allow-any "$commit" >oids && + ! grep "$blob" oids ' test_expect_success 'filtering by size has no effect if support for it is not advertised' ' @@ -929,7 +981,10 @@ test_expect_success 'filtering by size has no effect if support for it is not ad git -C client fetch-pack --filter=blob:limit=0 ../server HEAD 2> err && # Ensure that object is fetched - git -C client cat-file -e $(git hash-object server/one.t) && + commit=$(git -C server rev-parse HEAD) && + blob=$(git hash-object server/one.t) && + git -C client rev-list --objects --missing=allow-any "$commit" >oids && + grep "$blob" oids && test_i18ngrep "filtering not recognized by server" err ' @@ -951,9 +1006,11 @@ fetch_filter_blob_limit_zero () { git -C client fetch --filter=blob:limit=0 origin HEAD:somewhere && # Ensure that commit is fetched, but blob is not - test_config -C client extensions.partialclone "arbitrary string" && - git -C client cat-file -e $(git -C "$SERVER" rev-parse two) && - test_must_fail git -C client cat-file -e $(git hash-object "$SERVER/two.t") + commit=$(git -C "$SERVER" rev-parse two) && + blob=$(git hash-object server/two.t) && + git -C client rev-list --objects --missing=allow-any "$commit" >oids && + grep "$commit" oids && + ! grep "$blob" oids } test_expect_success 'fetch with --filter=blob:limit=0' ' diff --git a/t/t5504-fetch-receive-strict.sh b/t/t5504-fetch-receive-strict.sh index fdfe179b11..a32efe2b6c 100755 --- a/t/t5504-fetch-receive-strict.sh +++ b/t/t5504-fetch-receive-strict.sh @@ -4,6 +4,7 @@ test_description='fetch/receive strict mode' . ./test-lib.sh test_expect_success 'setup and inject "corrupt or missing" object' ' + test_oid_init && echo hello >greetings && git add greetings && git commit -m greetings && @@ -64,6 +65,7 @@ test_expect_success 'fetch with transfer.fsckobjects' ' cat >exp <<EOF To dst ! refs/heads/master:refs/heads/test [remote rejected] (missing necessary objects) +Done EOF test_expect_success 'push without strict' ' @@ -144,11 +146,11 @@ test_expect_success 'fsck with no skipList input' ' test_expect_success 'setup sorted and unsorted skipLists' ' cat >SKIP.unsorted <<-EOF && - 0000000000000000000000000000000000000004 - 0000000000000000000000000000000000000002 + $(test_oid 004) + $(test_oid 002) $commit - 0000000000000000000000000000000000000001 - 0000000000000000000000000000000000000003 + $(test_oid 001) + $(test_oid 003) EOF sort SKIP.unsorted >SKIP.sorted ' @@ -172,14 +174,14 @@ test_expect_success 'fsck with invalid or bogus skipList input' ' test_expect_success 'fsck with other accepted skipList input (comments & empty lines)' ' cat >SKIP.with-comment <<-EOF && # Some bad commit - 0000000000000000000000000000000000000001 + $(test_oid 001) EOF test_must_fail git -c fsck.skipList=SKIP.with-comment fsck 2>err-with-comment && test_i18ngrep "missingEmail" err-with-comment && cat >SKIP.with-empty-line <<-EOF && - 0000000000000000000000000000000000000001 + $(test_oid 001) - 0000000000000000000000000000000000000002 + $(test_oid 002) EOF test_must_fail git -c fsck.skipList=SKIP.with-empty-line fsck 2>err-with-empty-line && test_i18ngrep "missingEmail" err-with-empty-line @@ -204,7 +206,7 @@ test_expect_success 'fsck with exhaustive accepted skipList input (various types echo " # Comment after whitespace" >>SKIP.exhaustive && echo "$commit # Our bad commit (with leading whitespace and trailing comment)" >>SKIP.exhaustive && echo "# Some bad commit (leading whitespace)" >>SKIP.exhaustive && - echo " 0000000000000000000000000000000000000001" >>SKIP.exhaustive && + echo " $(test_oid 001)" >>SKIP.exhaustive && git -c fsck.skipList=SKIP.exhaustive fsck 2>err && test_must_be_empty err ' diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index 883b32efa0..dda81b7d07 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -734,15 +734,53 @@ test_expect_success 'reject adding remote with an invalid name' ' # the last two ones check if the config is updated. test_expect_success 'rename a remote' ' + test_config_global remote.pushDefault origin && git clone one four && ( cd four && + git config branch.master.pushRemote origin && git remote rename origin upstream && test -z "$(git for-each-ref refs/remotes/origin)" && test "$(git symbolic-ref refs/remotes/upstream/HEAD)" = "refs/remotes/upstream/master" && test "$(git rev-parse upstream/master)" = "$(git rev-parse master)" && test "$(git config remote.upstream.fetch)" = "+refs/heads/*:refs/remotes/upstream/*" && - test "$(git config branch.master.remote)" = "upstream" + test "$(git config branch.master.remote)" = "upstream" && + test "$(git config branch.master.pushRemote)" = "upstream" && + test "$(git config --global remote.pushDefault)" = "origin" + ) +' + +test_expect_success 'rename a remote renames repo remote.pushDefault' ' + git clone one four.1 && + ( + cd four.1 && + git config remote.pushDefault origin && + git remote rename origin upstream && + test "$(git config --local remote.pushDefault)" = "upstream" + ) +' + +test_expect_success 'rename a remote renames repo remote.pushDefault but ignores global' ' + test_config_global remote.pushDefault other && + git clone one four.2 && + ( + cd four.2 && + git config remote.pushDefault origin && + git remote rename origin upstream && + test "$(git config --global remote.pushDefault)" = "other" && + test "$(git config --local remote.pushDefault)" = "upstream" + ) +' + +test_expect_success 'rename a remote renames repo remote.pushDefault but keeps global' ' + test_config_global remote.pushDefault origin && + git clone one four.3 && + ( + cd four.3 && + git config remote.pushDefault origin && + git remote rename origin upstream && + test "$(git config --global remote.pushDefault)" = "origin" && + test "$(git config --local remote.pushDefault)" = "upstream" ) ' @@ -784,6 +822,54 @@ test_expect_success 'rename succeeds with existing remote.<target>.prune' ' git -C four.four remote rename origin upstream ' +test_expect_success 'remove a remote' ' + test_config_global remote.pushDefault origin && + git clone one four.five && + ( + cd four.five && + git config branch.master.pushRemote origin && + git remote remove origin && + test -z "$(git for-each-ref refs/remotes/origin)" && + test_must_fail git config branch.master.remote && + test_must_fail git config branch.master.pushRemote && + test "$(git config --global remote.pushDefault)" = "origin" + ) +' + +test_expect_success 'remove a remote removes repo remote.pushDefault' ' + git clone one four.five.1 && + ( + cd four.five.1 && + git config remote.pushDefault origin && + git remote remove origin && + test_must_fail git config --local remote.pushDefault + ) +' + +test_expect_success 'remove a remote removes repo remote.pushDefault but ignores global' ' + test_config_global remote.pushDefault other && + git clone one four.five.2 && + ( + cd four.five.2 && + git config remote.pushDefault origin && + git remote remove origin && + test "$(git config --global remote.pushDefault)" = "other" && + test_must_fail git config --local remote.pushDefault + ) +' + +test_expect_success 'remove a remote removes repo remote.pushDefault but keeps global' ' + test_config_global remote.pushDefault origin && + git clone one four.five.3 && + ( + cd four.five.3 && + git config remote.pushDefault origin && + git remote remove origin && + test "$(git config --global remote.pushDefault)" = "origin" && + test_must_fail git config --local remote.pushDefault + ) +' + cat >remotes_origin <<EOF URL: $(pwd)/one Push: refs/heads/master:refs/heads/upstream diff --git a/t/t5509-fetch-push-namespaces.sh b/t/t5509-fetch-push-namespaces.sh index 75cbfcc392..a67f792adf 100755 --- a/t/t5509-fetch-push-namespaces.sh +++ b/t/t5509-fetch-push-namespaces.sh @@ -20,7 +20,7 @@ test_expect_success setup ' ) && commit0=$(cd original && git rev-parse HEAD^) && commit1=$(cd original && git rev-parse HEAD) && - git init pushee && + git init --bare pushee && git init puller ' @@ -152,4 +152,15 @@ test_expect_success 'clone chooses correct HEAD (v2)' ' test_cmp expect actual ' +test_expect_success 'denyCurrentBranch and unborn branch with ref namespace' ' + ( + cd original && + git init unborn && + git remote add unborn-namespaced "ext::git --namespace=namespace %s unborn" && + test_must_fail git push unborn-namespaced HEAD:master && + git -C unborn config receive.denyCurrentBranch updateInstead && + git push unborn-namespaced HEAD:master + ) +' + test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 4b60282689..a66dbe0bde 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -11,7 +11,7 @@ D=$(pwd) test_bundle_object_count () { git verify-pack -v "$1" >verify.out && - test "$2" = $(grep '^[0-9a-f]\{40\} ' verify.out | wc -l) + test "$2" = $(grep "^$OID_REGEX " verify.out | wc -l) } convert_bundle_to_pack () { @@ -174,6 +174,30 @@ test_expect_success 'fetch --prune --tags with refspec prunes based on refspec' git rev-parse sometag ' +test_expect_success '--refmap="" ignores configured refspec' ' + cd "$TRASH_DIRECTORY" && + git clone "$D" remote-refs && + git -C remote-refs rev-parse remotes/origin/master >old && + git -C remote-refs update-ref refs/remotes/origin/master master~1 && + git -C remote-refs rev-parse remotes/origin/master >new && + git -C remote-refs fetch --refmap= origin "+refs/heads/*:refs/hidden/origin/*" && + git -C remote-refs rev-parse remotes/origin/master >actual && + test_cmp new actual && + git -C remote-refs fetch origin && + git -C remote-refs rev-parse remotes/origin/master >actual && + test_cmp old actual +' + +test_expect_success '--refmap="" and --prune' ' + git -C remote-refs update-ref refs/remotes/origin/foo/otherbranch master && + git -C remote-refs update-ref refs/hidden/foo/otherbranch master && + git -C remote-refs fetch --prune --refmap="" origin +refs/heads/*:refs/hidden/* && + git -C remote-refs rev-parse remotes/origin/foo/otherbranch && + test_must_fail git -C remote-refs rev-parse refs/hidden/foo/otherbranch && + git -C remote-refs fetch --prune origin && + test_must_fail git -C remote-refs rev-parse remotes/origin/foo/otherbranch +' + test_expect_success 'fetch tags when there is no tags' ' cd "$D" && @@ -261,9 +285,10 @@ test_expect_success 'create bundle 1' ' ' test_expect_success 'header of bundle looks right' ' + head -n 4 "$D"/bundle1 && head -n 1 "$D"/bundle1 | grep "^#" && - head -n 2 "$D"/bundle1 | grep "^-[0-9a-f]\{40\} " && - head -n 3 "$D"/bundle1 | grep "^[0-9a-f]\{40\} " && + head -n 2 "$D"/bundle1 | grep "^-$OID_REGEX " && + head -n 3 "$D"/bundle1 | grep "^$OID_REGEX " && head -n 4 "$D"/bundle1 | grep "^$" ' @@ -289,7 +314,7 @@ test_expect_success 'bundle 1 has only 3 files ' ' test_expect_success 'unbundle 2' ' cd "$D/bundle" && git fetch ../bundle2 master:master && - test "tip" = "$(git log -1 --pretty=oneline master | cut -b42-)" + test "tip" = "$(git log -1 --pretty=oneline master | cut -d" " -f2)" ' test_expect_success 'bundle does not prerequisite objects' ' @@ -354,7 +379,6 @@ test_expect_success 'fetch from GIT URL with a non-applying branch.<name>.merge # the strange name is: a\!'b test_expect_success 'quoting of a strangely named repo' ' test_must_fail git fetch "a\\!'\''b" > result 2>&1 && - cat result && grep "fatal: '\''a\\\\!'\''b'\''" result ' diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 43e1d8d4d2..e98c3a0174 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -4,6 +4,14 @@ test_description='git ls-remote' . ./test-lib.sh +generate_references () { + for ref + do + oid=$(git rev-parse "$ref") && + printf '%s\t%s\n' "$oid" "$ref" || return 1 + done +} + test_expect_success setup ' >file && git add file && @@ -13,11 +21,11 @@ test_expect_success setup ' git tag mark1.1 && git tag mark1.2 && git tag mark1.10 && - git show-ref --tags -d | sed -e "s/ / /" >expected.tag && - ( - echo "$(git rev-parse HEAD) HEAD" && - git show-ref -d | sed -e "s/ / /" - ) >expected.all && + git show-ref --tags -d >expected.tag.raw && + sed -e "s/ / /" expected.tag.raw >expected.tag && + generate_references HEAD >expected.all && + git show-ref -d >refs && + sed -e "s/ / /" refs >>expected.all && git remote add self "$(pwd)/.git" ' @@ -43,34 +51,31 @@ test_expect_success 'ls-remote self' ' ' test_expect_success 'ls-remote --sort="version:refname" --tags self' ' - cat >expect <<-EOF && - $(git rev-parse mark) refs/tags/mark - $(git rev-parse mark1.1) refs/tags/mark1.1 - $(git rev-parse mark1.2) refs/tags/mark1.2 - $(git rev-parse mark1.10) refs/tags/mark1.10 - EOF + generate_references \ + refs/tags/mark \ + refs/tags/mark1.1 \ + refs/tags/mark1.2 \ + refs/tags/mark1.10 >expect && git ls-remote --sort="version:refname" --tags self >actual && test_cmp expect actual ' test_expect_success 'ls-remote --sort="-version:refname" --tags self' ' - cat >expect <<-EOF && - $(git rev-parse mark1.10) refs/tags/mark1.10 - $(git rev-parse mark1.2) refs/tags/mark1.2 - $(git rev-parse mark1.1) refs/tags/mark1.1 - $(git rev-parse mark) refs/tags/mark - EOF + generate_references \ + refs/tags/mark1.10 \ + refs/tags/mark1.2 \ + refs/tags/mark1.1 \ + refs/tags/mark >expect && git ls-remote --sort="-version:refname" --tags self >actual && test_cmp expect actual ' test_expect_success 'ls-remote --sort="-refname" --tags self' ' - cat >expect <<-EOF && - $(git rev-parse mark1.2) refs/tags/mark1.2 - $(git rev-parse mark1.10) refs/tags/mark1.10 - $(git rev-parse mark1.1) refs/tags/mark1.1 - $(git rev-parse mark) refs/tags/mark - EOF + generate_references \ + refs/tags/mark1.2 \ + refs/tags/mark1.10 \ + refs/tags/mark1.1 \ + refs/tags/mark >expect && git ls-remote --sort="-refname" --tags self >actual && test_cmp expect actual ' @@ -92,7 +97,7 @@ test_expect_success 'use "origin" when no remote specified' ' test_expect_success 'suppress "From <url>" with -q' ' git ls-remote -q 2>actual_err && - test_must_fail test_cmp exp_err actual_err + ! test_cmp exp_err actual_err ' test_expect_success 'use branch.<name>.remote if possible' ' @@ -180,8 +185,8 @@ do test_config $configsection.hiderefs refs/tags && git ls-remote . >actual && test_unconfig $configsection.hiderefs && - git ls-remote . | - sed -e "/ refs\/tags\//d" >expect && + git ls-remote . >expect.raw && + sed -e "/ refs\/tags\//d" expect.raw >expect && test_cmp expect actual ' @@ -212,62 +217,64 @@ test_expect_success 'protocol v2 supports hiderefs' ' test_expect_success 'ls-remote --symref' ' git fetch origin && - cat >expect <<-EOF && - ref: refs/heads/master HEAD - $(git rev-parse HEAD) HEAD - $(git rev-parse refs/heads/master) refs/heads/master - $(git rev-parse HEAD) refs/remotes/origin/HEAD - $(git rev-parse refs/remotes/origin/master) refs/remotes/origin/master - $(git rev-parse refs/tags/mark) refs/tags/mark - $(git rev-parse refs/tags/mark1.1) refs/tags/mark1.1 - $(git rev-parse refs/tags/mark1.10) refs/tags/mark1.10 - $(git rev-parse refs/tags/mark1.2) refs/tags/mark1.2 - EOF + echo "ref: refs/heads/master HEAD" >expect && + generate_references \ + HEAD \ + refs/heads/master >>expect && + oid=$(git rev-parse HEAD) && + echo "$oid refs/remotes/origin/HEAD" >>expect && + generate_references \ + refs/remotes/origin/master \ + refs/tags/mark \ + refs/tags/mark1.1 \ + refs/tags/mark1.10 \ + refs/tags/mark1.2 >>expect && # Protocol v2 supports sending symrefs for refs other than HEAD, so use # protocol v0 here. - GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref >actual && + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref >actual && test_cmp expect actual ' test_expect_success 'ls-remote with filtered symref (refname)' ' - cat >expect <<-\EOF && + rev=$(git rev-parse HEAD) && + cat >expect <<-EOF && ref: refs/heads/master HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a HEAD + $rev HEAD EOF # Protocol v2 supports sending symrefs for refs other than HEAD, so use # protocol v0 here. - GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref . HEAD >actual && + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref . HEAD >actual && test_cmp expect actual ' test_expect_failure 'ls-remote with filtered symref (--heads)' ' git symbolic-ref refs/heads/foo refs/tags/mark && - cat >expect <<-\EOF && + cat >expect <<-EOF && ref: refs/tags/mark refs/heads/foo - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/foo - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master + $rev refs/heads/foo + $rev refs/heads/master EOF # Protocol v2 supports sending symrefs for refs other than HEAD, so use # protocol v0 here. - GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref --heads . >actual && + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref --heads . >actual && test_cmp expect actual ' test_expect_success 'ls-remote --symref omits filtered-out matches' ' - cat >expect <<-\EOF && - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/foo - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master + cat >expect <<-EOF && + $rev refs/heads/foo + $rev refs/heads/master EOF # Protocol v2 supports sending symrefs for refs other than HEAD, so use # protocol v0 here. - GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref --heads . >actual && + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref --heads . >actual && test_cmp expect actual && - GIT_TEST_PROTOCOL_VERSION= git ls-remote --symref . "refs/heads/*" >actual && + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref . "refs/heads/*" >actual && test_cmp expect actual ' test_lazy_prereq GIT_DAEMON ' - git env--helper --type=bool --default=true --exit-code GIT_TEST_GIT_DAEMON + test_bool_env GIT_TEST_GIT_DAEMON true ' # This test spawns a daemon, so run it only if the user would be OK with diff --git a/t/t5515-fetch-merge-logic.sh b/t/t5515-fetch-merge-logic.sh index 961eb35c99..9d6a46ff56 100755 --- a/t/t5515-fetch-merge-logic.sh +++ b/t/t5515-fetch-merge-logic.sh @@ -8,15 +8,60 @@ test_description='Merge logic in fetch' # NEEDSWORK: If the overspecification of the expected result is reduced, we # might be able to run this test in all protocol versions. -GIT_TEST_PROTOCOL_VERSION= +GIT_TEST_PROTOCOL_VERSION=0 +export GIT_TEST_PROTOCOL_VERSION . ./test-lib.sh +build_script () { + script="$1" && + for i in one three_file master master2 one_tree three two two2 three2 + do + echo "s/$(test_oid --hash=sha1 "$i")/$(test_oid "$i")/g" >>"$script" + done +} + +convert_expected () { + file="$1" && + script="$2" && + sed -f "$script" "$file" >"$file.tmp" && + mv "$file.tmp" "$file" +} + test_expect_success setup ' GIT_AUTHOR_DATE="2006-06-26 00:00:00 +0000" && GIT_COMMITTER_DATE="2006-06-26 00:00:00 +0000" && export GIT_AUTHOR_DATE GIT_COMMITTER_DATE && + test_oid_cache <<-EOF && + one sha1:8e32a6d901327a23ef831511badce7bf3bf46689 + one sha256:8739546433ab1ac72ee93088dce611210effee072b2b586ceac6dde43ebec9ce + + three_file sha1:0e3b14047d3ee365f4f2a1b673db059c3972589c + three_file sha256:bc4447d50c07497a8bfe6eef817f2364ecca9d471452e43b52756cc1a908bd32 + + master sha1:6c9dec2b923228c9ff994c6cfe4ae16c12408dc5 + master sha256:8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75 + + one_tree sha1:22feea448b023a2d864ef94b013735af34d238ba + one_tree sha256:6e4743f4ef2356b881dda5e91f5c7cdffe870faf350bf7b312f80a20935f5d83 + + three sha1:c61a82b60967180544e3c19f819ddbd0c9f89899 + three sha256:0cc6d1eda617ded715170786e31ba4e2d0185404ec5a3508dd0d73b324860c6a + + two sha1:525b7fb068d59950d185a8779dc957c77eed73ba + two sha256:3b21de3440cd38c2a9e9b464adb923f7054949ed4c918e1a0ac4c95cd52774db + + master2 sha1:754b754407bf032e9a2f9d5a9ad05ca79a6b228f + master2 sha256:6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0 + + two2 sha1:6134ee8f857693b96ff1cc98d3e2fd62b199e5a8 + two2 sha256:87a2d3ee29c83a3dc7afd41c0606b11f67603120b910a7be7840accdc18344d4 + + three2 sha1:0567da4d5edd2ff4bb292a465ba9e64dcad9536b + three2 sha256:cceb3e8eca364fa9a0a39a1efbebecacc664af86cbbd8070571f5faeb5f0e8c3 + EOF + echo >file original && git add file && git commit -a -m One && @@ -86,7 +131,8 @@ test_expect_success setup ' git config branch.br-$remote-octopus.remote $remote && git config branch.br-$remote-octopus.merge refs/heads/one && git config --add branch.br-$remote-octopus.merge two - done + done && + build_script sed_script ' # Merge logic depends on branch properties and Pull: or .fetch lines @@ -137,6 +183,10 @@ do actual_r="$pfx-refs.$test" test_expect_success "$cmd" ' + cp "$expect_f" expect_f && + convert_expected expect_f sed_script && + cp "$expect_r" expect_r && + convert_expected expect_r sed_script && { echo "# $cmd" set x $cmd; shift @@ -152,18 +202,18 @@ do cat .git/FETCH_HEAD } >"$actual_f" && git show-ref >"$actual_r" && - if test -f "$expect_f" + if test -f "expect_f" then - test_cmp "$expect_f" "$actual_f" && + test_cmp "expect_f" "$actual_f" && rm -f "$actual_f" else # this is to help developing new tests. cp "$actual_f" "$expect_f" false fi && - if test -f "$expect_r" + if test -f "expect_r" then - test_cmp "$expect_r" "$actual_r" && + test_cmp "expect_r" "$actual_r" && rm -f "$actual_r" else # this is to help developing new tests. diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index c81ca360ac..9c6218f568 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -1066,6 +1066,7 @@ test_expect_success 'push --porcelain rejected' ' echo >.git/foo "To testrepo" && echo >>.git/foo "! refs/heads/master:refs/heads/master [remote rejected] (branch is currently checked out)" && + echo >>.git/foo "Done" && test_must_fail git push >.git/bar --porcelain testrepo refs/heads/master:refs/heads/master && test_cmp .git/foo .git/bar @@ -1151,7 +1152,7 @@ test_expect_success 'fetch exact SHA1' ' # unadvertised objects, so restrict this test to v0. # fetching the hidden object should fail by default - test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ git fetch -v ../testrepo $the_commit:refs/heads/copy 2>err && test_i18ngrep "Server does not allow request for unadvertised object" err && test_must_fail git rev-parse --verify refs/heads/copy && @@ -1210,7 +1211,7 @@ do cd shallow && # Some protocol versions (e.g. 2) support fetching # unadvertised objects, so restrict this test to v0. - test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ git fetch --depth=1 ../testrepo/.git $SHA1 && git --git-dir=../testrepo/.git config uploadpack.allowreachablesha1inwant true && git fetch --depth=1 ../testrepo/.git $SHA1 && @@ -1241,9 +1242,9 @@ do cd shallow && # Some protocol versions (e.g. 2) support fetching # unadvertised objects, so restrict this test to v0. - test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ git fetch ../testrepo/.git $SHA1_3 && - test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ git fetch ../testrepo/.git $SHA1_1 && git --git-dir=../testrepo/.git config uploadpack.allowreachablesha1inwant true && git fetch ../testrepo/.git $SHA1_1 && @@ -1251,7 +1252,7 @@ do test_must_fail git cat-file commit $SHA1_2 && git fetch ../testrepo/.git $SHA1_2 && git cat-file commit $SHA1_2 && - test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ git fetch ../testrepo/.git $SHA1_3 2>err && test_i18ngrep "remote error:.*not our ref.*$SHA1_3\$" err ) @@ -1291,7 +1292,7 @@ test_expect_success 'peeled advertisements are not considered ref tips' ' git -C testrepo commit --allow-empty -m two && git -C testrepo tag -m foo mytag HEAD^ && oid=$(git -C testrepo rev-parse mytag^{commit}) && - test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ git fetch testrepo $oid 2>err && test_i18ngrep "Server does not allow request for unadvertised object" err ' @@ -1712,4 +1713,15 @@ test_expect_success 'updateInstead with push-to-checkout hook' ' ) ' +test_expect_success 'denyCurrentBranch and worktrees' ' + git worktree add new-wt && + git clone . cloned && + test_commit -C cloned first && + test_config receive.denyCurrentBranch refuse && + test_must_fail git -C cloned push origin HEAD:new-wt && + test_config receive.denyCurrentBranch updateInstead && + git -C cloned push origin HEAD:new-wt && + test_must_fail git -C cloned push --delete origin new-wt +' + test_done diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index cf4cc32fd0..9fae07cdfa 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -5,18 +5,22 @@ test_description='pulling into void' . ./test-lib.sh modify () { - sed -e "$1" <"$2" >"$2.x" && + sed -e "$1" "$2" >"$2.x" && mv "$2.x" "$2" } test_pull_autostash () { + expect_parent_num="$1" && + shift && git reset --hard before-rebase && echo dirty >new_file && git add new_file && git pull "$@" . copy && - test_cmp_rev HEAD^ copy && - test "$(cat new_file)" = dirty && - test "$(cat file)" = "modified again" + test_cmp_rev HEAD^"$expect_parent_num" copy && + echo dirty >expect && + test_cmp expect new_file && + echo "modified again" >expect && + test_cmp expect file } test_pull_autostash_fail () { @@ -24,7 +28,7 @@ test_pull_autostash_fail () { echo dirty >new_file && git add new_file && test_must_fail git pull "$@" . copy 2>err && - test_i18ngrep "uncommitted changes." err + test_i18ngrep -E "uncommitted changes.|overwritten by merge:" err } test_expect_success setup ' @@ -39,8 +43,8 @@ test_expect_success 'pulling into void' ' cd cloned && git pull .. ) && - test -f file && - test -f cloned/file && + test_path_is_file file && + test_path_is_file cloned/file && test_cmp file cloned/file ' @@ -50,8 +54,8 @@ test_expect_success 'pulling into void using master:master' ' cd cloned-uho && git pull .. master:master ) && - test -f file && - test -f cloned-uho/file && + test_path_is_file file && + test_path_is_file cloned-uho/file && test_cmp file cloned-uho/file ' @@ -99,7 +103,7 @@ test_expect_success 'pulling into void must not create an octopus' ' ( cd cloned-octopus && test_must_fail git pull .. master master && - ! test -f file + test_path_is_missing file ) ' @@ -110,9 +114,11 @@ test_expect_success 'test . as a remote' ' echo updated >file && git commit -a -m updated && git checkout copy && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && git pull && - test "$(cat file)" = updated && + echo updated >expect && + test_cmp expect file && git reflog -1 >reflog.actual && sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy && echo "OBJID HEAD@{0}: pull: Fast-forward" >reflog.expected && @@ -125,9 +131,11 @@ test_expect_success 'the default remote . should not break explicit pull' ' git commit -a -m modified && git checkout copy && git reset --hard HEAD^ && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && git pull . second && - test "$(cat file)" = modified && + echo modified >expect && + test_cmp expect file && git reflog -1 >reflog.actual && sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy && echo "OBJID HEAD@{0}: pull . second: Fast-forward" >reflog.expected && @@ -137,10 +145,11 @@ test_expect_success 'the default remote . should not break explicit pull' ' test_expect_success 'fail if wildcard spec does not match any refs' ' git checkout -b test copy^ && test_when_finished "git checkout -f copy && git branch -D test" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull . "refs/nonexisting1/*:refs/nonexisting2/*" 2>err && test_i18ngrep "no candidates for merging" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if no branches specified with non-default remote' ' @@ -148,11 +157,12 @@ test_expect_success 'fail if no branches specified with non-default remote' ' test_when_finished "git remote remove test_remote" && git checkout -b test copy^ && test_when_finished "git checkout -f copy && git branch -D test" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_config branch.test.remote origin && test_must_fail git pull test_remote 2>err && test_i18ngrep "specify a branch on the command line" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if not on a branch' ' @@ -160,10 +170,11 @@ test_expect_success 'fail if not on a branch' ' test_when_finished "git remote remove origin" && git checkout HEAD^ && test_when_finished "git checkout -f copy" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull 2>err && test_i18ngrep "not currently on a branch" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if no configuration for current branch' ' @@ -172,10 +183,11 @@ test_expect_success 'fail if no configuration for current branch' ' git checkout -b test copy^ && test_when_finished "git checkout -f copy && git branch -D test" && test_config branch.test.remote test_remote && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull 2>err && test_i18ngrep "no tracking information" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'pull --all: fail if no configuration for current branch' ' @@ -184,10 +196,11 @@ test_expect_success 'pull --all: fail if no configuration for current branch' ' git checkout -b test copy^ && test_when_finished "git checkout -f copy && git branch -D test" && test_config branch.test.remote test_remote && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull --all 2>err && test_i18ngrep "There is no tracking information" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if upstream branch does not exist' ' @@ -195,26 +208,31 @@ test_expect_success 'fail if upstream branch does not exist' ' test_when_finished "git checkout -f copy && git branch -D test" && test_config branch.test.remote . && test_config branch.test.merge refs/heads/nonexisting && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull 2>err && test_i18ngrep "no such ref was fetched" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if the index has unresolved entries' ' git checkout -b third second^ && test_when_finished "git checkout -f copy && git branch -D third" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_commit modified2 file && - test -z "$(git ls-files -u)" && + git ls-files -u >unmerged && + test_must_be_empty unmerged && test_must_fail git pull . second && - test -n "$(git ls-files -u)" && + git ls-files -u >unmerged && + test_file_not_empty unmerged && cp file expected && test_must_fail git pull . second 2>err && test_i18ngrep "Pulling is not possible because you have unmerged files." err && test_cmp expected file && git add file && - test -z "$(git ls-files -u)" && + git ls-files -u >unmerged && + test_must_be_empty unmerged && test_must_fail git pull . second 2>err && test_i18ngrep "You have not concluded your merge" err && test_cmp expected file @@ -223,47 +241,66 @@ test_expect_success 'fail if the index has unresolved entries' ' test_expect_success 'fast-forwards working tree if branch head is updated' ' git checkout -b third second^ && test_when_finished "git checkout -f copy && git branch -D third" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && git pull . second:third 2>err && test_i18ngrep "fetch updated the current branch head" err && - test "$(cat file)" = modified && - test "$(git rev-parse third)" = "$(git rev-parse second)" + echo modified >expect && + test_cmp expect file && + test_cmp_rev third second ' test_expect_success 'fast-forward fails with conflicting work tree' ' git checkout -b third second^ && test_when_finished "git checkout -f copy && git branch -D third" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && echo conflict >file && test_must_fail git pull . second:third 2>err && test_i18ngrep "Cannot fast-forward your working tree" err && - test "$(cat file)" = conflict && - test "$(git rev-parse third)" = "$(git rev-parse second)" + echo conflict >expect && + test_cmp expect file && + test_cmp_rev third second ' test_expect_success '--rebase' ' git branch to-rebase && - echo modified again > file && + echo modified again >file && git commit -m file file && git checkout to-rebase && - echo new > file2 && + echo new >file2 && git add file2 && git commit -m "new file" && git tag before-rebase && git pull --rebase . copy && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual ' -test_expect_success '--rebase fast forward' ' +test_expect_success '--rebase (merge) fast forward' ' git reset --hard before-rebase && git checkout -b ff && echo another modification >file && git commit -m third file && git checkout to-rebase && - git pull --rebase . ff && - test "$(git rev-parse HEAD)" = "$(git rev-parse ff)" && + git -c rebase.backend=merge pull --rebase . ff && + test_cmp_rev HEAD ff && + + # The above only validates the result. Did we actually bypass rebase? + git reflog -1 >reflog.actual && + sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy && + echo "OBJID HEAD@{0}: pull --rebase . ff: Fast-forward" >reflog.expected && + test_cmp reflog.expected reflog.fuzzy +' + +test_expect_success '--rebase (am) fast forward' ' + git reset --hard before-rebase && + + git -c rebase.backend=apply pull --rebase . ff && + test_cmp_rev HEAD ff && # The above only validates the result. Did we actually bypass rebase? git reflog -1 >reflog.actual && @@ -287,7 +324,7 @@ test_expect_success '--rebase --autostash fast forward' ' git checkout behind && echo dirty >file && git pull --rebase --autostash . to-rebase-ff && - test "$(git rev-parse HEAD)" = "$(git rev-parse to-rebase-ff)" + test_cmp_rev HEAD to-rebase-ff ' test_expect_success '--rebase with conflicts shows advice' ' @@ -305,7 +342,7 @@ test_expect_success '--rebase with conflicts shows advice' ' test_tick && git commit -m "Create conflict" seq.txt && test_must_fail git pull --rebase . seq 2>err >out && - test_i18ngrep "Resolve all conflicts manually" out + test_i18ngrep "Resolve all conflicts manually" err ' test_expect_success 'failed --rebase shows advice' ' @@ -319,35 +356,37 @@ test_expect_success 'failed --rebase shows advice' ' git checkout -f -b fails-to-rebase HEAD^ && test_commit v2-without-cr file "2" file2-lf && test_must_fail git pull --rebase . diverging 2>err >out && - test_i18ngrep "Resolve all conflicts manually" out + test_i18ngrep "Resolve all conflicts manually" err ' test_expect_success '--rebase fails with multiple branches' ' git reset --hard before-rebase && test_must_fail git pull --rebase . copy master 2>err && - test "$(git rev-parse HEAD)" = "$(git rev-parse before-rebase)" && + test_cmp_rev HEAD before-rebase && test_i18ngrep "Cannot rebase onto multiple branches" err && - test modified = "$(git show HEAD:file)" + echo modified >expect && + git show HEAD:file >actual && + test_cmp expect actual ' test_expect_success 'pull --rebase succeeds with dirty working directory and rebase.autostash set' ' test_config rebase.autostash true && - test_pull_autostash --rebase + test_pull_autostash 1 --rebase ' test_expect_success 'pull --rebase --autostash & rebase.autostash=true' ' test_config rebase.autostash true && - test_pull_autostash --rebase --autostash + test_pull_autostash 1 --rebase --autostash ' test_expect_success 'pull --rebase --autostash & rebase.autostash=false' ' test_config rebase.autostash false && - test_pull_autostash --rebase --autostash + test_pull_autostash 1 --rebase --autostash ' test_expect_success 'pull --rebase --autostash & rebase.autostash unset' ' test_unconfig rebase.autostash && - test_pull_autostash --rebase --autostash + test_pull_autostash 1 --rebase --autostash ' test_expect_success 'pull --rebase --no-autostash & rebase.autostash=true' ' @@ -365,25 +404,54 @@ test_expect_success 'pull --rebase --no-autostash & rebase.autostash unset' ' test_pull_autostash_fail --rebase --no-autostash ' -for i in --autostash --no-autostash -do - test_expect_success "pull $i (without --rebase) is illegal" ' - test_must_fail git pull $i . copy 2>err && - test_i18ngrep "only valid with --rebase" err - ' -done +test_expect_success 'pull succeeds with dirty working directory and merge.autostash set' ' + test_config merge.autostash true && + test_pull_autostash 2 +' + +test_expect_success 'pull --autostash & merge.autostash=true' ' + test_config merge.autostash true && + test_pull_autostash 2 --autostash +' + +test_expect_success 'pull --autostash & merge.autostash=false' ' + test_config merge.autostash false && + test_pull_autostash 2 --autostash +' + +test_expect_success 'pull --autostash & merge.autostash unset' ' + test_unconfig merge.autostash && + test_pull_autostash 2 --autostash +' + +test_expect_success 'pull --no-autostash & merge.autostash=true' ' + test_config merge.autostash true && + test_pull_autostash_fail --no-autostash +' + +test_expect_success 'pull --no-autostash & merge.autostash=false' ' + test_config merge.autostash false && + test_pull_autostash_fail --no-autostash +' + +test_expect_success 'pull --no-autostash & merge.autostash unset' ' + test_unconfig merge.autostash && + test_pull_autostash_fail --no-autostash +' test_expect_success 'pull.rebase' ' git reset --hard before-rebase && test_config pull.rebase true && git pull . copy && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual ' test_expect_success 'pull --autostash & pull.rebase=true' ' test_config pull.rebase true && - test_pull_autostash --autostash + test_pull_autostash 1 --autostash ' test_expect_success 'pull --no-autostash & pull.rebase=true' ' @@ -395,8 +463,10 @@ test_expect_success 'branch.to-rebase.rebase' ' git reset --hard before-rebase && test_config branch.to-rebase.rebase true && git pull . copy && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual ' test_expect_success 'branch.to-rebase.rebase should override pull.rebase' ' @@ -404,23 +474,29 @@ test_expect_success 'branch.to-rebase.rebase should override pull.rebase' ' test_config pull.rebase true && test_config branch.to-rebase.rebase false && git pull . copy && - test "$(git rev-parse HEAD^)" != "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" + test_cmp_rev ! HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual ' -test_expect_success "pull --rebase warns on --verify-signatures" ' +test_expect_success 'pull --rebase warns on --verify-signatures' ' git reset --hard before-rebase && git pull --rebase --verify-signatures . copy 2>err && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" && + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual && test_i18ngrep "ignoring --verify-signatures for rebase" err ' -test_expect_success "pull --rebase does not warn on --no-verify-signatures" ' +test_expect_success 'pull --rebase does not warn on --no-verify-signatures' ' git reset --hard before-rebase && git pull --rebase --no-verify-signatures . copy 2>err && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" && + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual && test_i18ngrep ! "verify-signatures" err ' @@ -440,25 +516,31 @@ test_expect_success 'pull.rebase=false create a new merge commit' ' git reset --hard before-preserve-rebase && test_config pull.rebase false && git pull . copy && - test "$(git rev-parse HEAD^1)" = "$(git rev-parse before-preserve-rebase)" && - test "$(git rev-parse HEAD^2)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^1 before-preserve-rebase && + test_cmp_rev HEAD^2 copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success 'pull.rebase=true flattens keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase true && git pull . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^^ copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success 'pull.rebase=1 is treated as true and flattens keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase 1 && git pull . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^^ copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success REBASE_P \ @@ -466,8 +548,8 @@ test_expect_success REBASE_P \ git reset --hard before-preserve-rebase && test_config pull.rebase preserve && git pull . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test "$(git rev-parse HEAD^2)" = "$(git rev-parse keep-merge)" + test_cmp_rev HEAD^^ copy && + test_cmp_rev HEAD^2 keep-merge ' test_expect_success 'pull.rebase=interactive' ' @@ -478,7 +560,8 @@ test_expect_success 'pull.rebase=interactive' ' test_set_editor "$TRASH_DIRECTORY/fake-editor" && test_when_finished "test_might_fail git rebase --abort" && test_must_fail git pull --rebase=interactive . copy && - test "I was here" = "$(cat fake.out)" + echo "I was here" >expect && + test_cmp expect fake.out ' test_expect_success 'pull --rebase=i' ' @@ -489,30 +572,35 @@ test_expect_success 'pull --rebase=i' ' test_set_editor "$TRASH_DIRECTORY/fake-editor" && test_when_finished "test_might_fail git rebase --abort" && test_must_fail git pull --rebase=i . copy && - test "I was here, too" = "$(cat fake.out)" + echo "I was here, too" >expect && + test_cmp expect fake.out ' test_expect_success 'pull.rebase=invalid fails' ' git reset --hard before-preserve-rebase && test_config pull.rebase invalid && - ! git pull . copy + test_must_fail git pull . copy ' test_expect_success '--rebase=false create a new merge commit' ' git reset --hard before-preserve-rebase && test_config pull.rebase true && git pull --rebase=false . copy && - test "$(git rev-parse HEAD^1)" = "$(git rev-parse before-preserve-rebase)" && - test "$(git rev-parse HEAD^2)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^1 before-preserve-rebase && + test_cmp_rev HEAD^2 copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success '--rebase=true rebases and flattens keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase preserve && git pull --rebase=true . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^^ copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success REBASE_P \ @@ -520,58 +608,62 @@ test_expect_success REBASE_P \ git reset --hard before-preserve-rebase && test_config pull.rebase true && git pull --rebase=preserve . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test "$(git rev-parse HEAD^2)" = "$(git rev-parse keep-merge)" + test_cmp_rev HEAD^^ copy && + test_cmp_rev HEAD^2 keep-merge ' test_expect_success '--rebase=invalid fails' ' git reset --hard before-preserve-rebase && - ! git pull --rebase=invalid . copy + test_must_fail git pull --rebase=invalid . copy ' test_expect_success '--rebase overrides pull.rebase=preserve and flattens keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase preserve && git pull --rebase . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^^ copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success '--rebase with rebased upstream' ' - git remote add -f me . && git checkout copy && git tag copy-orig && git reset --hard HEAD^ && - echo conflicting modification > file && + echo conflicting modification >file && git commit -m conflict file && git checkout to-rebase && - echo file > file2 && + echo file >file2 && git commit -m to-rebase file2 && git tag to-rebase-orig && git pull --rebase me copy && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" - + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_expect_success '--rebase -f with rebased upstream' ' test_when_finished "test_might_fail git rebase --abort" && git reset --hard to-rebase-orig && git pull --rebase -f me copy && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_expect_success '--rebase with rebased default upstream' ' - git update-ref refs/remotes/me/copy copy-orig && git checkout --track -b to-rebase2 me/copy && git reset --hard to-rebase-orig && git pull --rebase && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" - + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_expect_success 'rebased upstream + fetch + pull --rebase' ' @@ -582,13 +674,14 @@ test_expect_success 'rebased upstream + fetch + pull --rebase' ' git reset --hard to-rebase-orig && git fetch && git pull --rebase && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_expect_success 'pull --rebase dies early with dirty working directory' ' - git checkout to-rebase && git update-ref refs/remotes/me/copy copy^ && COPY="$(git rev-parse --verify me/copy)" && @@ -596,23 +689,23 @@ test_expect_success 'pull --rebase dies early with dirty working directory' ' test_config branch.to-rebase.remote me && test_config branch.to-rebase.merge refs/heads/copy && test_config branch.to-rebase.rebase true && - echo dirty >> file && + echo dirty >>file && git add file && test_must_fail git pull && - test "$COPY" = "$(git rev-parse --verify me/copy)" && + test_cmp_rev "$COPY" me/copy && git checkout HEAD -- file && git pull && - test "$COPY" != "$(git rev-parse --verify me/copy)" - + test_cmp_rev ! "$COPY" me/copy ' test_expect_success 'pull --rebase works on branch yet to be born' ' git rev-parse master >expect && mkdir empty_repo && - (cd empty_repo && - git init && - git pull --rebase .. master && - git rev-parse HEAD >../actual + ( + cd empty_repo && + git init && + git pull --rebase .. master && + git rev-parse HEAD >../actual ) && test_cmp expect actual ' @@ -624,10 +717,14 @@ test_expect_success 'pull --rebase fails on unborn branch with staged changes' ' cd empty_repo2 && echo staged-file >staged-file && git add staged-file && - test "$(git ls-files)" = staged-file && + echo staged-file >expect && + git ls-files >actual && + test_cmp expect actual && test_must_fail git pull --rebase .. master 2>err && - test "$(git ls-files)" = staged-file && - test "$(git show :staged-file)" = staged-file && + git ls-files >actual && + test_cmp expect actual && + git show :staged-file >actual && + test_cmp expect actual && test_i18ngrep "unborn branch with changes added to the index" err ) ' @@ -638,7 +735,8 @@ test_expect_success 'pull --rebase fails on corrupt HEAD' ' ( cd corrupt && test_commit one && - obj=$(git rev-parse --verify HEAD | sed "s#^..#&/#") && + git rev-parse --verify HEAD >head && + obj=$(sed "s#^..#&/#" head) && rm -f .git/objects/$obj && test_must_fail git pull --rebase ) @@ -646,66 +744,79 @@ test_expect_success 'pull --rebase fails on corrupt HEAD' ' test_expect_success 'setup for detecting upstreamed changes' ' mkdir src && - (cd src && - git init && - printf "1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n" > stuff && - git add stuff && - git commit -m "Initial revision" + ( + cd src && + git init && + printf "1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n" > stuff && + git add stuff && + git commit -m "Initial revision" ) && git clone src dst && - (cd src && - modify s/5/43/ stuff && - git commit -a -m "5->43" && - modify s/6/42/ stuff && - git commit -a -m "Make it bigger" + ( + cd src && + modify s/5/43/ stuff && + git commit -a -m "5->43" && + modify s/6/42/ stuff && + git commit -a -m "Make it bigger" ) && - (cd dst && - modify s/5/43/ stuff && - git commit -a -m "Independent discovery of 5->43" + ( + cd dst && + modify s/5/43/ stuff && + git commit -a -m "Independent discovery of 5->43" ) ' test_expect_success 'git pull --rebase detects upstreamed changes' ' - (cd dst && - git pull --rebase && - test -z "$(git ls-files -u)" + ( + cd dst && + git pull --rebase && + git ls-files -u >untracked && + test_must_be_empty untracked ) ' test_expect_success 'setup for avoiding reapplying old patches' ' - (cd dst && - test_might_fail git rebase --abort && - git reset --hard origin/master + ( + cd dst && + test_might_fail git rebase --abort && + git reset --hard origin/master ) && git clone --bare src src-replace.git && rm -rf src && mv src-replace.git src && - (cd dst && - modify s/2/22/ stuff && - git commit -a -m "Change 2" && - modify s/3/33/ stuff && - git commit -a -m "Change 3" && - modify s/4/44/ stuff && - git commit -a -m "Change 4" && - git push && - - modify s/44/55/ stuff && - git commit --amend -a -m "Modified Change 4" + ( + cd dst && + modify s/2/22/ stuff && + git commit -a -m "Change 2" && + modify s/3/33/ stuff && + git commit -a -m "Change 3" && + modify s/4/44/ stuff && + git commit -a -m "Change 4" && + git push && + + modify s/44/55/ stuff && + git commit --amend -a -m "Modified Change 4" ) ' test_expect_success 'git pull --rebase does not reapply old patches' ' - (cd dst && - test_must_fail git pull --rebase && - test 1 = $(find .git/rebase-apply -name "000*" | wc -l) + ( + cd dst && + test_must_fail git pull --rebase && + cat .git/rebase-merge/done .git/rebase-merge/git-rebase-todo >work && + grep -v -e \# -e ^$ work >patches && + test_line_count = 1 patches && + rm -f work ) ' test_expect_success 'git pull --rebase against local branch' ' git checkout -b copy2 to-rebase-orig && git pull --rebase . to-rebase && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_done diff --git a/t/t5521-pull-options.sh b/t/t5521-pull-options.sh index ccde8ba491..159afa7ac8 100755 --- a/t/t5521-pull-options.sh +++ b/t/t5521-pull-options.sh @@ -11,10 +11,10 @@ test_expect_success 'setup' ' git commit -m one) ' -test_expect_success 'git pull -q' ' +test_expect_success 'git pull -q --no-rebase' ' mkdir clonedq && (cd clonedq && git init && - git pull -q "../parent" >out 2>err && + git pull -q --no-rebase "../parent" >out 2>err && test_must_be_empty err && test_must_be_empty out) ' @@ -30,10 +30,10 @@ test_expect_success 'git pull -q --rebase' ' test_must_be_empty out) ' -test_expect_success 'git pull' ' +test_expect_success 'git pull --no-rebase' ' mkdir cloned && (cd cloned && git init && - git pull "../parent" >out 2>err && + git pull --no-rebase "../parent" >out 2>err && test -s err && test_must_be_empty out) ' @@ -46,10 +46,10 @@ test_expect_success 'git pull --rebase' ' test_must_be_empty out) ' -test_expect_success 'git pull -v' ' +test_expect_success 'git pull -v --no-rebase' ' mkdir clonedv && (cd clonedv && git init && - git pull -v "../parent" >out 2>err && + git pull -v --no-rebase "../parent" >out 2>err && test -s err && test_must_be_empty out) ' @@ -62,25 +62,25 @@ test_expect_success 'git pull -v --rebase' ' test_must_be_empty out) ' -test_expect_success 'git pull -v -q' ' +test_expect_success 'git pull -v -q --no-rebase' ' mkdir clonedvq && (cd clonedvq && git init && - git pull -v -q "../parent" >out 2>err && + git pull -v -q --no-rebase "../parent" >out 2>err && test_must_be_empty out && test_must_be_empty err) ' -test_expect_success 'git pull -q -v' ' +test_expect_success 'git pull -q -v --no-rebase' ' mkdir clonedqv && (cd clonedqv && git init && - git pull -q -v "../parent" >out 2>err && + git pull -q -v --no-rebase "../parent" >out 2>err && test_must_be_empty out && test -s err) ' test_expect_success 'git pull --cleanup errors early on invalid argument' ' mkdir clonedcleanup && (cd clonedcleanup && git init && - test_must_fail git pull --cleanup invalid "../parent" >out 2>err && + test_must_fail git pull --no-rebase --cleanup invalid "../parent" >out 2>err && test_must_be_empty out && test -s err) ' diff --git a/t/t5528-push-default.sh b/t/t5528-push-default.sh index 44309566f1..4d1e0c363e 100755 --- a/t/t5528-push-default.sh +++ b/t/t5528-push-default.sh @@ -163,7 +163,7 @@ test_pushdefault_workflow success current master # update parent1's foo (which is our upstream) test_pushdefault_workflow success upstream foo -# upsream is foo which is not the name of the current branch +# upstream is foo which is not the name of the current branch test_pushdefault_workflow failure simple master # master and foo are updated diff --git a/t/t5530-upload-pack-error.sh b/t/t5530-upload-pack-error.sh index a1d3031d40..4ce9a9f704 100755 --- a/t/t5530-upload-pack-error.sh +++ b/t/t5530-upload-pack-error.sh @@ -14,7 +14,7 @@ corrupt_repo () { } test_expect_success 'setup and corrupt repository' ' - + test_oid_init && echo file >file && git add file && git rev-parse :file && @@ -31,9 +31,10 @@ test_expect_success 'fsck fails' ' ' test_expect_success 'upload-pack fails due to error in pack-objects packing' ' - - printf "0032want %s\n00000009done\n0000" \ - $(git rev-parse HEAD) >input && + head=$(git rev-parse HEAD) && + hexsz=$(test_oid hexsz) && + printf "%04xwant %s\n00000009done\n0000" \ + $(($hexsz + 10)) $head >input && test_must_fail git upload-pack . <input >/dev/null 2>output.err && test_i18ngrep "unable to read" output.err && test_i18ngrep "pack-objects died" output.err @@ -51,16 +52,17 @@ test_expect_success 'fsck fails' ' ' test_expect_success 'upload-pack fails due to error in rev-list' ' - printf "0032want %s\n0034shallow %s00000009done\n0000" \ - $(git rev-parse HEAD) $(git rev-parse HEAD^) >input && + printf "%04xwant %s\n%04xshallow %s00000009done\n0000" \ + $(($hexsz + 10)) $(git rev-parse HEAD) \ + $(($hexsz + 12)) $(git rev-parse HEAD^) >input && test_must_fail git upload-pack . <input >/dev/null 2>output.err && grep "bad tree object" output.err ' test_expect_success 'upload-pack fails due to bad want (no object)' ' - printf "0045want %s multi_ack_detailed\n00000009done\n0000" \ - "deadbeefdeadbeefdeadbeefdeadbeefdeadbeef" >input && + printf "%04xwant %s multi_ack_detailed\n00000009done\n0000" \ + $(($hexsz + 29)) $(test_oid deadbeef) >input && test_must_fail git upload-pack . <input >output 2>output.err && grep "not our ref" output.err && grep "ERR" output && @@ -70,8 +72,8 @@ test_expect_success 'upload-pack fails due to bad want (no object)' ' test_expect_success 'upload-pack fails due to bad want (not tip)' ' oid=$(echo an object we have | git hash-object -w --stdin) && - printf "0045want %s multi_ack_detailed\n00000009done\n0000" \ - "$oid" >input && + printf "%04xwant %s multi_ack_detailed\n00000009done\n0000" \ + $(($hexsz + 29)) "$oid" >input && test_must_fail git upload-pack . <input >output 2>output.err && grep "not our ref" output.err && grep "ERR" output && @@ -80,8 +82,8 @@ test_expect_success 'upload-pack fails due to bad want (not tip)' ' test_expect_success 'upload-pack fails due to error in pack-objects enumeration' ' - printf "0032want %s\n00000009done\n0000" \ - $(git rev-parse HEAD) >input && + printf "%04xwant %s\n00000009done\n0000" \ + $((hexsz + 10)) $(git rev-parse HEAD) >input && test_must_fail git upload-pack . <input >/dev/null 2>output.err && grep "bad tree object" output.err && grep "pack-objects died" output.err diff --git a/t/t5535-fetch-push-symref.sh b/t/t5535-fetch-push-symref.sh index 8ed58d27f2..e8f6d233ff 100755 --- a/t/t5535-fetch-push-symref.sh +++ b/t/t5535-fetch-push-symref.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='avoiding conflicting update thru symref aliasing' +test_description='avoiding conflicting update through symref aliasing' . ./test-lib.sh diff --git a/t/t5537-fetch-shallow.sh b/t/t5537-fetch-shallow.sh index 97a67728ca..d427a2d7f7 100755 --- a/t/t5537-fetch-shallow.sh +++ b/t/t5537-fetch-shallow.sh @@ -15,16 +15,17 @@ test_expect_success 'setup' ' commit 2 && commit 3 && commit 4 && - git config --global transfer.fsckObjects true + git config --global transfer.fsckObjects true && + test_oid_cache <<-\EOF + perl sha1:s/0034shallow %s/0036unshallow %s/ + perl sha256:s/004cshallow %s/004eunshallow %s/ + EOF ' test_expect_success 'setup shallow clone' ' git clone --no-local --depth=2 .git shallow && git --git-dir=shallow/.git log --format=%s >actual && - cat <<EOF >expect && -4 -3 -EOF + test_write_lines 4 3 >expect && test_cmp expect actual ' @@ -34,10 +35,7 @@ test_expect_success 'clone from shallow clone' ' cd shallow2 && git fsck && git log --format=%s >actual && - cat <<EOF >expect && -4 -3 -EOF + test_write_lines 4 3 >expect && test_cmp expect actual ) ' @@ -52,11 +50,7 @@ test_expect_success 'fetch from shallow clone' ' git fetch && git fsck && git log --format=%s origin/master >actual && - cat <<EOF >expect && -5 -4 -3 -EOF + test_write_lines 5 4 3 >expect && test_cmp expect actual ) ' @@ -71,10 +65,7 @@ test_expect_success 'fetch --depth from shallow clone' ' git fetch --depth=2 && git fsck && git log --format=%s origin/master >actual && - cat <<EOF >expect && -6 -5 -EOF + test_write_lines 6 5 >expect && test_cmp expect actual ) ' @@ -85,12 +76,7 @@ test_expect_success 'fetch --unshallow from shallow clone' ' git fetch --unshallow && git fsck && git log --format=%s origin/master >actual && - cat <<EOF >expect && -6 -5 -4 -3 -EOF + test_write_lines 6 5 4 3 >expect && test_cmp expect actual ) ' @@ -107,15 +93,10 @@ test_expect_success 'fetch something upstream has but hidden by clients shallow git fetch ../.git +refs/heads/master:refs/remotes/top/master && git fsck && git log --format=%s top/master >actual && - cat <<EOF >expect && -add-1-back -4 -3 -EOF + test_write_lines add-1-back 4 3 >expect && test_cmp expect actual ) && git --git-dir=shallow2/.git cat-file blob $(echo 1|git hash-object --stdin) >/dev/null - ' test_expect_success 'fetch that requires changes in .git/shallow is filtered' ' @@ -127,16 +108,12 @@ test_expect_success 'fetch that requires changes in .git/shallow is filtered' ' git init notshallow && ( cd notshallow && - git fetch ../shallow/.git refs/heads/*:refs/remotes/shallow/*&& + git fetch ../shallow/.git refs/heads/*:refs/remotes/shallow/* && git for-each-ref --format="%(refname)" >actual.refs && - cat <<EOF >expect.refs && -refs/remotes/shallow/no-shallow -EOF + echo refs/remotes/shallow/no-shallow >expect.refs && test_cmp expect.refs actual.refs && git log --format=%s shallow/no-shallow >actual && - cat <<EOF >expect && -no-shallow -EOF + echo no-shallow >expect && test_cmp expect actual ) ' @@ -154,21 +131,44 @@ test_expect_success 'fetch --update-shallow' ' git fetch --update-shallow ../shallow/.git refs/heads/*:refs/remotes/shallow/* && git fsck && git for-each-ref --sort=refname --format="%(refname)" >actual.refs && - cat <<EOF >expect.refs && -refs/remotes/shallow/master -refs/remotes/shallow/no-shallow -refs/tags/heavy-tag -refs/tags/light-tag -EOF + cat <<-\EOF >expect.refs && + refs/remotes/shallow/master + refs/remotes/shallow/no-shallow + refs/tags/heavy-tag + refs/tags/light-tag + EOF + test_cmp expect.refs actual.refs && + git log --format=%s shallow/master >actual && + test_write_lines 7 6 5 4 3 >expect && + test_cmp expect actual + ) +' + +test_expect_success 'fetch --update-shallow (with fetch.writeCommitGraph)' ' + ( + cd shallow && + git checkout master && + commit 8 && + git tag -m foo heavy-tag-for-graph HEAD^ && + git tag light-tag-for-graph HEAD^:tracked + ) && + test_config -C notshallow fetch.writeCommitGraph true && + ( + cd notshallow && + git fetch --update-shallow ../shallow/.git refs/heads/*:refs/remotes/shallow/* && + git fsck && + git for-each-ref --sort=refname --format="%(refname)" >actual.refs && + cat <<-EOF >expect.refs && + refs/remotes/shallow/master + refs/remotes/shallow/no-shallow + refs/tags/heavy-tag + refs/tags/heavy-tag-for-graph + refs/tags/light-tag + refs/tags/light-tag-for-graph + EOF test_cmp expect.refs actual.refs && git log --format=%s shallow/master >actual && - cat <<EOF >expect && -7 -6 -5 -4 -3 -EOF + test_write_lines 8 7 6 5 4 3 >expect && test_cmp expect actual ) ' @@ -179,10 +179,7 @@ test_expect_success POSIXPERM,SANITY 'shallow fetch from a read-only repo' ' find read-only.git -print | xargs chmod -w && git clone --no-local --depth=2 read-only.git from-read-only && git --git-dir=from-read-only/.git log --format=%s >actual && - cat >expect <<EOF && -add-1-back -4 -EOF + test_write_lines add-1-back 4 >expect && test_cmp expect actual ' @@ -233,22 +230,22 @@ test_expect_success 'shallow fetches check connectivity before writing shallow f git -C "$REPO" config protocol.version 2 && git -C client config protocol.version 2 && - git -C client fetch --depth=2 "$HTTPD_URL/one_time_sed/repo" master:a_branch && + git -C client fetch --depth=2 "$HTTPD_URL/one_time_perl/repo" master:a_branch && # Craft a situation in which the server sends back an unshallow request # with an empty packfile. This is done by refetching with a shorter # depth (to ensure that the packfile is empty), and overwriting the # shallow line in the response with the unshallow line we want. - printf "s/0034shallow %s/0036unshallow %s/" \ + printf "$(test_oid perl)" \ "$(git -C "$REPO" rev-parse HEAD)" \ "$(git -C "$REPO" rev-parse HEAD^)" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && + >"$HTTPD_ROOT_PATH/one-time-perl" && test_must_fail env GIT_TEST_SIDEBAND_ALL=0 git -C client \ - fetch --depth=1 "$HTTPD_URL/one_time_sed/repo" \ + fetch --depth=1 "$HTTPD_URL/one_time_perl/repo" \ master:a_branch && - # Ensure that the one-time-sed script was used. - ! test -e "$HTTPD_ROOT_PATH/one-time-sed" && + # Ensure that the one-time-perl script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-perl" && # Ensure that the resulting repo is consistent, despite our failure to # fetch. diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh index b4ad81f006..c0d02dee89 100755 --- a/t/t5539-fetch-http-shallow.sh +++ b/t/t5539-fetch-http-shallow.sh @@ -69,7 +69,7 @@ test_expect_success 'no shallow lines after receiving ACK ready' ' test_commit new-too && # NEEDSWORK: If the overspecification of the expected result is reduced, we # might be able to run this test in all protocol versions. - GIT_TRACE_PACKET="$TRASH_DIRECTORY/trace" GIT_TEST_PROTOCOL_VERSION= \ + GIT_TRACE_PACKET="$TRASH_DIRECTORY/trace" GIT_TEST_PROTOCOL_VERSION=0 \ git fetch --depth=2 && grep "fetch-pack< ACK .* ready" ../trace && ! grep "fetch-pack> done" ../trace diff --git a/t/t5540-http-push-webdav.sh b/t/t5540-http-push-webdav.sh index a094fd5e71..d476c33509 100755 --- a/t/t5540-http-push-webdav.sh +++ b/t/t5540-http-push-webdav.sh @@ -134,15 +134,13 @@ test_expect_success 'MKCOL sends directory names with trailing slashes' ' x1="[0-9a-f]" x2="$x1$x1" -x5="$x1$x1$x1$x1$x1" -x38="$x5$x5$x5$x5$x5$x5$x5$x1$x1$x1" -x40="$x38$x2" +xtrunc=$(echo $OID_REGEX | sed -e "s/\[0-9a-f\]\[0-9a-f\]//") test_expect_success 'PUT and MOVE sends object to URLs with SHA-1 hash suffix' ' sed \ -e "s/PUT /OP /" \ -e "s/MOVE /OP /" \ - -e "s|/objects/$x2/${x38}_$x40|WANTED_PATH_REQUEST|" \ + -e "s|/objects/$x2/${xtrunc}_$OID_REGEX|WANTED_PATH_REQUEST|" \ "$HTTPD_ROOT_PATH"/access.log | grep -e "\"OP .*WANTED_PATH_REQUEST HTTP/[.0-9]*\" 20[0-9] " diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index 4c970787b0..afc680d5e3 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -49,7 +49,7 @@ test_expect_success 'no empty path components' ' # NEEDSWORK: If the overspecification of the expected result is reduced, we # might be able to run this test in all protocol versions. - if test -z "$GIT_TEST_PROTOCOL_VERSION" + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 then check_access_log exp fi @@ -135,7 +135,7 @@ EOF test_expect_success 'used receive-pack service' ' # NEEDSWORK: If the overspecification of the expected result is reduced, we # might be able to run this test in all protocol versions. - if test -z "$GIT_TEST_PROTOCOL_VERSION" + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 then check_access_log exp fi @@ -177,6 +177,9 @@ test_expect_success 'push (chunked)' ' test $HEAD = $(git rev-parse --verify HEAD)) ' +## References of remote: atomic1(1) master(2) collateral(2) other(2) +## References of local : atomic2(2) master(1) collateral(3) other(2) collateral1(3) atomic(1) +## Atomic push : master(1) collateral(3) atomic(1) test_expect_success 'push --atomic also prevents branch creation, reports collateral' ' # Setup upstream repo - empty for now d=$HTTPD_DOCUMENT_ROOT_PATH/atomic-branches.git && @@ -189,7 +192,8 @@ test_expect_success 'push --atomic also prevents branch creation, reports collat test_commit atomic2 && git branch collateral && git branch other && - git push "$up" master collateral other && + git push "$up" atomic1 master collateral other && + git tag -d atomic1 && # collateral is a valid push, but should be failed by atomic push git checkout collateral && @@ -224,7 +228,11 @@ test_expect_success 'push --atomic also prevents branch creation, reports collat # the collateral failure refs should be indicated to the user grep "^ ! .*rejected.* atomic -> atomic .*atomic push failed" output && - grep "^ ! .*rejected.* collateral -> collateral .*atomic push failed" output + grep "^ ! .*rejected.* collateral -> collateral .*atomic push failed" output && + + # never report what we do not push + ! grep "^ ! .*rejected.* atomic1 " output && + ! grep "^ ! .*rejected.* other " output ' test_expect_success 'push --atomic fails on server-side errors' ' diff --git a/t/t5543-atomic-push.sh b/t/t5543-atomic-push.sh index 7079bcf9a0..620c30d58f 100755 --- a/t/t5543-atomic-push.sh +++ b/t/t5543-atomic-push.sh @@ -27,6 +27,12 @@ test_refs () { test_cmp expect actual } +fmt_status_report () { + sed -n \ + -e "/^To / { s/ */ /g; p; }" \ + -e "/^ ! / { s/ */ /g; p; }" +} + test_expect_success 'atomic push works for a single branch' ' mk_repo_pair && ( @@ -191,4 +197,87 @@ test_expect_success 'atomic push is not advertised if configured' ' test_refs master HEAD@{1} ' +# References in upstream : master(1) one(1) foo(1) +# References in workbench: master(2) foo(1) two(2) bar(2) +# Atomic push : master(2) two(2) bar(2) +test_expect_success 'atomic push reports (reject by update hook)' ' + mk_repo_pair && + ( + cd workbench && + test_commit one && + git branch foo && + git push up master one foo && + git tag -d one + ) && + ( + mkdir -p upstream/.git/hooks && + cat >upstream/.git/hooks/update <<-EOF && + #!/bin/sh + + if test "\$1" = "refs/heads/bar" + then + echo >&2 "Pusing to branch bar is prohibited" + exit 1 + fi + EOF + chmod a+x upstream/.git/hooks/update + ) && + ( + cd workbench && + test_commit two && + git branch bar + ) && + test_must_fail git -C workbench \ + push --atomic up master two bar >out 2>&1 && + fmt_status_report <out >actual && + cat >expect <<-EOF && + To ../upstream + ! [remote rejected] master -> master (atomic push failure) + ! [remote rejected] two -> two (atomic push failure) + ! [remote rejected] bar -> bar (hook declined) + EOF + test_cmp expect actual +' + +# References in upstream : master(1) one(1) foo(1) +# References in workbench: master(2) foo(1) two(2) bar(2) +test_expect_success 'atomic push reports (mirror, but reject by update hook)' ' + ( + cd workbench && + git remote remove up && + git remote add up ../upstream + ) && + test_must_fail git -C workbench \ + push --atomic --mirror up >out 2>&1 && + fmt_status_report <out >actual && + cat >expect <<-EOF && + To ../upstream + ! [remote rejected] master -> master (atomic push failure) + ! [remote rejected] one (atomic push failure) + ! [remote rejected] bar -> bar (hook declined) + ! [remote rejected] two -> two (atomic push failure) + EOF + test_cmp expect actual +' + +# References in upstream : master(2) one(1) foo(1) +# References in workbench: master(1) foo(1) two(2) bar(2) +test_expect_success 'atomic push reports (reject by non-ff)' ' + rm upstream/.git/hooks/update && + ( + cd workbench && + git push up master && + git reset --hard HEAD^ + ) && + test_must_fail git -C workbench \ + push --atomic up master foo bar >out 2>&1 && + fmt_status_report <out >actual && + cat >expect <<-EOF && + To ../upstream + ! [rejected] master -> master (non-fast-forward) + ! [rejected] bar -> bar (atomic push failed) + EOF + test_cmp expect actual +' + test_done diff --git a/t/t5545-push-options.sh b/t/t5545-push-options.sh index 04b34c4de1..38e6f7340e 100755 --- a/t/t5545-push-options.sh +++ b/t/t5545-push-options.sh @@ -115,7 +115,7 @@ test_expect_success 'push options and submodules' ' git -C parent submodule add ../upstream workbench && git -C parent/workbench remote add up ../../upstream && - git -C parent commit -m "add submoule" && + git -C parent commit -m "add submodule" && test_commit -C parent/workbench two && git -C parent add workbench && diff --git a/t/t5548-push-porcelain.sh b/t/t5548-push-porcelain.sh new file mode 100755 index 0000000000..1b19b3ef55 --- /dev/null +++ b/t/t5548-push-porcelain.sh @@ -0,0 +1,279 @@ +#!/bin/sh +# +# Copyright (c) 2020 Jiang Xin +# +test_description='Test git push porcelain output' + +. ./test-lib.sh + +# Create commits in <repo> and assign each commit's oid to shell variables +# given in the arguments (A, B, and C). E.g.: +# +# create_commits_in <repo> A B C +# +# NOTE: Never calling this function from a subshell since variable +# assignments will disappear when subshell exits. +create_commits_in () { + repo="$1" && + if ! parent=$(git -C "$repo" rev-parse HEAD^{} --) + then + parent= + fi && + T=$(git -C "$repo" write-tree) && + shift && + while test $# -gt 0 + do + name=$1 && + test_tick && + if test -z "$parent" + then + oid=$(echo $name | git -C "$repo" commit-tree $T) + else + oid=$(echo $name | git -C "$repo" commit-tree -p $parent $T) + fi && + eval $name=$oid && + parent=$oid && + shift || + return 1 + done && + git -C "$repo" update-ref refs/heads/master $oid +} + +# Format the output of git-push, git-show-ref and other commands to make a +# user-friendly and stable text. We can easily prepare the expect text +# without having to worry about future changes of the commit ID and spaces +# of the output. +make_user_friendly_and_stable_output () { + sed \ + -e "s/ *\$//" \ + -e "s/ */ /g" \ + -e "s/ / /g" \ + -e "s/$A/<COMMIT-A>/g" \ + -e "s/$B/<COMMIT-B>/g" \ + -e "s/$ZERO_OID/<ZERO-OID>/g" \ + -e "s/$(echo $A | cut -c1-7)[0-9a-f]*/<OID-A>/g" \ + -e "s/$(echo $B | cut -c1-7)[0-9a-f]*/<OID-B>/g" \ + -e "s#To $URL_PREFIX/upstream.git#To <URL/of/upstream.git>#" +} + +setup_upstream_and_workbench () { + # Upstream after setup : master(B) foo(A) bar(A) baz(A) + # Workbench after setup : master(A) + test_expect_success "setup upstream repository and workbench" ' + rm -rf upstream.git workbench && + git init --bare upstream.git && + git init workbench && + create_commits_in workbench A B && + ( + cd workbench && + # Try to make a stable fixed width for abbreviated commit ID, + # this fixed-width oid will be replaced with "<OID>". + git config core.abbrev 7 && + git remote add origin ../upstream.git && + git update-ref refs/heads/master $A && + git push origin \ + $B:refs/heads/master \ + $A:refs/heads/foo \ + $A:refs/heads/bar \ + $A:refs/heads/baz + ) && + git -C "workbench" config advice.pushUpdateRejected false && + upstream=upstream.git + ' +} + +run_git_push_porcelain_output_test() { + case $1 in + http) + PROTOCOL="HTTP protocol" + URL_PREFIX="http://.*" + ;; + file) + PROTOCOL="builtin protocol" + URL_PREFIX="\.\." + ;; + esac + + # Refs of upstream : master(B) foo(A) bar(A) baz(A) + # Refs of workbench: master(A) baz(A) next(A) + # git-push : master(A) NULL (B) baz(A) next(A) + test_expect_success "porcelain output of successful git-push ($PROTOCOL)" ' + ( + cd workbench && + git update-ref refs/heads/master $A && + git update-ref refs/heads/baz $A && + git update-ref refs/heads/next $A && + git push --porcelain --force origin \ + master \ + :refs/heads/foo \ + $B:bar \ + baz \ + next + ) >out && + make_user_friendly_and_stable_output <out >actual && + cat >expect <<-EOF && + To <URL/of/upstream.git> + = refs/heads/baz:refs/heads/baz [up to date] + <COMMIT-B>:refs/heads/bar <OID-A>..<OID-B> + - :refs/heads/foo [deleted] + + refs/heads/master:refs/heads/master <OID-B>...<OID-A> (forced update) + * refs/heads/next:refs/heads/next [new branch] + Done + EOF + test_cmp expect actual && + + git -C "$upstream" show-ref >out && + make_user_friendly_and_stable_output <out >actual && + cat >expect <<-EOF && + <COMMIT-B> refs/heads/bar + <COMMIT-A> refs/heads/baz + <COMMIT-A> refs/heads/master + <COMMIT-A> refs/heads/next + EOF + test_cmp expect actual + ' + + # Refs of upstream : master(A) bar(B) baz(A) next(A) + # Refs of workbench: master(B) bar(A) baz(A) next(A) + # git-push : master(B) bar(A) NULL next(A) + test_expect_success "atomic push failed ($PROTOCOL)" ' + ( + cd workbench && + git update-ref refs/heads/master $B && + git update-ref refs/heads/bar $A && + test_must_fail git push --atomic --porcelain origin \ + master \ + bar \ + :baz \ + next + ) >out && + make_user_friendly_and_stable_output <out >actual && + cat >expect <<-EOF && + To <URL/of/upstream.git> + = refs/heads/next:refs/heads/next [up to date] + ! refs/heads/bar:refs/heads/bar [rejected] (non-fast-forward) + ! (delete):refs/heads/baz [rejected] (atomic push failed) + ! refs/heads/master:refs/heads/master [rejected] (atomic push failed) + Done + EOF + test_cmp expect actual && + + git -C "$upstream" show-ref >out && + make_user_friendly_and_stable_output <out >actual && + cat >expect <<-EOF && + <COMMIT-B> refs/heads/bar + <COMMIT-A> refs/heads/baz + <COMMIT-A> refs/heads/master + <COMMIT-A> refs/heads/next + EOF + test_cmp expect actual + ' + test_expect_success "prepare pre-receive hook ($PROTOCOL)" ' + write_script "$upstream/hooks/pre-receive" <<-EOF + exit 1 + EOF + ' + + # Refs of upstream : master(A) bar(B) baz(A) next(A) + # Refs of workbench: master(B) bar(A) baz(A) next(A) + # git-push : master(B) bar(A) NULL next(A) + test_expect_success "pre-receive hook declined ($PROTOCOL)" ' + ( + cd workbench && + git update-ref refs/heads/master $B && + git update-ref refs/heads/bar $A && + test_must_fail git push --porcelain --force origin \ + master \ + bar \ + :baz \ + next + ) >out && + make_user_friendly_and_stable_output <out >actual && + cat >expect <<-EOF && + To <URL/of/upstream.git> + = refs/heads/next:refs/heads/next [up to date] + ! refs/heads/bar:refs/heads/bar [remote rejected] (pre-receive hook declined) + ! :refs/heads/baz [remote rejected] (pre-receive hook declined) + ! refs/heads/master:refs/heads/master [remote rejected] (pre-receive hook declined) + Done + EOF + test_cmp expect actual && + + git -C "$upstream" show-ref >out && + make_user_friendly_and_stable_output <out >actual && + cat >expect <<-EOF && + <COMMIT-B> refs/heads/bar + <COMMIT-A> refs/heads/baz + <COMMIT-A> refs/heads/master + <COMMIT-A> refs/heads/next + EOF + test_cmp expect actual + ' + + test_expect_success "remove pre-receive hook ($PROTOCOL)" ' + rm "$upstream/hooks/pre-receive" + ' + + # Refs of upstream : master(A) bar(B) baz(A) next(A) + # Refs of workbench: master(B) bar(A) baz(A) next(A) + # git-push : master(B) bar(A) NULL next(A) + test_expect_success "non-fastforward push ($PROTOCOL)" ' + ( + cd workbench && + test_must_fail git push --porcelain origin \ + master \ + bar \ + :baz \ + next + ) >out && + make_user_friendly_and_stable_output <out >actual && + cat >expect <<-EOF && + To <URL/of/upstream.git> + = refs/heads/next:refs/heads/next [up to date] + - :refs/heads/baz [deleted] + refs/heads/master:refs/heads/master <OID-A>..<OID-B> + ! refs/heads/bar:refs/heads/bar [rejected] (non-fast-forward) + Done + EOF + test_cmp expect actual && + + git -C "$upstream" show-ref >out && + make_user_friendly_and_stable_output <out >actual && + cat >expect <<-EOF && + <COMMIT-B> refs/heads/bar + <COMMIT-B> refs/heads/master + <COMMIT-A> refs/heads/next + EOF + test_cmp expect actual + ' +} + +# Initialize the upstream repository and local workbench. +setup_upstream_and_workbench + +# Run git-push porcelain test on builtin protocol +run_git_push_porcelain_output_test file + +ROOT_PATH="$PWD" +. "$TEST_DIRECTORY"/lib-gpg.sh +. "$TEST_DIRECTORY"/lib-httpd.sh +. "$TEST_DIRECTORY"/lib-terminal.sh +start_httpd + +# Re-initialize the upstream repository and local workbench. +setup_upstream_and_workbench + +test_expect_success "setup for http" ' + git -C upstream.git config http.receivepack true && + upstream="$HTTPD_DOCUMENT_ROOT_PATH/upstream.git" && + mv upstream.git "$upstream" && + + git -C workbench remote set-url origin $HTTPD_URL/smart/upstream.git +' + +setup_askpass_helper + +# Run git-push porcelain test on HTTP protocol +run_git_push_porcelain_output_test http + +test_done diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index b811d89cfd..50485300eb 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -248,9 +248,7 @@ test_expect_success 'fetch can handle previously-fetched .idx files' ' ' test_expect_success 'did not use upload-pack service' ' - test_might_fail grep '/git-upload-pack' <"$HTTPD_ROOT_PATH"/access.log >act && - : >exp && - test_cmp exp act + ! grep "/git-upload-pack" "$HTTPD_ROOT_PATH/access.log" ' test_expect_success 'git client shows text/plain errors' ' @@ -321,11 +319,17 @@ test_expect_success 'git client does not send an empty Accept-Language' ' ' test_expect_success 'remote-http complains cleanly about malformed urls' ' - # do not actually issue "list" or other commands, as we do not - # want to rely on what curl would actually do with such a broken - # URL. This is just about making sure we do not segfault during - # initialization. - test_must_fail git remote-http http::/example.com/repo.git + test_must_fail git remote-http http::/example.com/repo.git 2>stderr && + test_i18ngrep "url has no scheme" stderr +' + +# NEEDSWORK: Writing commands to git-remote-curl can race against the latter +# erroring out, producing SIGPIPE. Remove "ok=sigpipe" once transport-helper has +# learned to handle early remote helper failures more cleanly. +test_expect_success 'remote-http complains cleanly about empty scheme' ' + test_must_fail ok=sigpipe git ls-remote \ + http::${HTTPD_URL#http}/dumb/repo.git 2>stderr && + test_i18ngrep "url has no scheme" stderr ' test_expect_success 'redirects can be forbidden/allowed' ' diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index e38e543867..6788aeface 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -43,7 +43,7 @@ test_expect_success 'clone http repository' ' < Cache-Control: no-cache, max-age=0, must-revalidate < Content-Type: application/x-git-upload-pack-result EOF - GIT_TRACE_CURL=true GIT_TEST_PROTOCOL_VERSION= \ + GIT_TRACE_CURL=true GIT_TEST_PROTOCOL_VERSION=0 \ git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && test_cmp file clone/file && tr '\''\015'\'' Q <err | @@ -84,7 +84,7 @@ test_expect_success 'clone http repository' ' # NEEDSWORK: If the overspecification of the expected result is reduced, we # might be able to run this test in all protocol versions. - if test -z "$GIT_TEST_PROTOCOL_VERSION" + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 then sed -e "s/^> Accept-Encoding: .*/> Accept-Encoding: ENCODINGS/" \ actual >actual.smudged && @@ -113,7 +113,7 @@ test_expect_success 'used upload-pack service' ' # NEEDSWORK: If the overspecification of the expected result is reduced, we # might be able to run this test in all protocol versions. - if test -z "$GIT_TEST_PROTOCOL_VERSION" + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 then check_access_log exp fi @@ -241,7 +241,7 @@ test_expect_success 'cookies stored in http.cookiefile when http.savecookies set # NEEDSWORK: If the overspecification of the expected result is reduced, we # might be able to run this test in all protocol versions. - if test -z "$GIT_TEST_PROTOCOL_VERSION" + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 then tail -3 cookies.txt | sort >cookies_tail.txt && test_cmp expect_cookies.txt cookies_tail.txt @@ -336,7 +336,7 @@ test_expect_success 'test allowreachablesha1inwant with unreachable' ' git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && # Some protocol versions (e.g. 2) support fetching # unadvertised objects, so restrict this test to v0. - test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" ' @@ -358,7 +358,7 @@ test_expect_success 'test allowanysha1inwant with unreachable' ' git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && # Some protocol versions (e.g. 2) support fetching # unadvertised objects, so restrict this test to v0. - test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" && git -C "$server" config uploadpack.allowanysha1inwant 1 && diff --git a/t/t5552-skipping-fetch-negotiator.sh b/t/t5552-skipping-fetch-negotiator.sh index f70cbcc9ca..156c704040 100755 --- a/t/t5552-skipping-fetch-negotiator.sh +++ b/t/t5552-skipping-fetch-negotiator.sh @@ -107,7 +107,11 @@ test_expect_success 'use ref advertisement to filter out commits' ' # The ref advertisement itself is filtered when protocol v2 is used, so # use v0. - GIT_TEST_PROTOCOL_VERSION= trace_fetch client origin to_fetch && + ( + GIT_TEST_PROTOCOL_VERSION=0 && + export GIT_TEST_PROTOCOL_VERSION && + trace_fetch client origin to_fetch + ) && have_sent c5 c4^ c2side && have_not_sent c4 c4^^ c4^^^ ' @@ -169,7 +173,17 @@ test_expect_success 'do not send "have" with ancestors of commits that server AC test_commit -C server commit-on-b1 && test_config -C client fetch.negotiationalgorithm skipping && - trace_fetch client "$(pwd)/server" to_fetch && + + # NEEDSWORK: The number of "have"s sent depends on whether the transport + # is stateful. If the overspecification of the result were reduced, this + # test could be used for both stateful and stateless transports. + ( + # Force protocol v0, in which local transport is stateful (in + # protocol v2 it is stateless). + GIT_TEST_PROTOCOL_VERSION=0 && + export GIT_TEST_PROTOCOL_VERSION && + trace_fetch client "$(pwd)/server" to_fetch + ) && grep " fetch" trace && # fetch-pack sends 2 requests each containing 16 "have" lines before diff --git a/t/t5562-http-backend-content-length.sh b/t/t5562-http-backend-content-length.sh index f0f425b2cf..3f4ac71f83 100755 --- a/t/t5562-http-backend-content-length.sh +++ b/t/t5562-http-backend-content-length.sh @@ -53,15 +53,20 @@ test_expect_success 'setup' ' test_commit c1 && hash_head=$(git rev-parse HEAD) && hash_prev=$(git rev-parse HEAD~1) && - printf "want %s" "$hash_head" | packetize >fetch_body && - printf 0000 >>fetch_body && - printf "have %s" "$hash_prev" | packetize >>fetch_body && - printf done | packetize >>fetch_body && + { + packetize "want $hash_head" && + printf 0000 && + packetize "have $hash_prev" && + packetize "done" + } >fetch_body && test_copy_bytes 10 <fetch_body >fetch_body.trunc && hash_next=$(git commit-tree -p HEAD -m next HEAD^{tree}) && - printf "%s %s refs/heads/newbranch\\0report-status\\n" "$_z40" "$hash_next" | packetize >push_body && - printf 0000 >>push_body && - echo "$hash_next" | git pack-objects --stdout >>push_body && + { + printf "%s %s refs/heads/newbranch\\0report-status\\n" \ + "$ZERO_OID" "$hash_next" | packetize && + printf 0000 && + echo "$hash_next" | git pack-objects --stdout + } >push_body && test_copy_bytes 10 <push_body >push_body.trunc && : >empty_body ' diff --git a/t/t5573-pull-verify-signatures.sh b/t/t5573-pull-verify-signatures.sh index 3e9876e197..a53dd8550d 100755 --- a/t/t5573-pull-verify-signatures.sh +++ b/t/t5573-pull-verify-signatures.sh @@ -60,6 +60,27 @@ test_expect_success GPG 'pull commit with untrusted signature with --verify-sign test_i18ngrep "has an untrusted GPG signature" pullerror ' +test_expect_success GPG 'pull commit with untrusted signature with --verify-signatures and minTrustLevel=ultimate' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel ultimate && + test_must_fail git pull --ff-only --verify-signatures untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit with untrusted signature with --verify-signatures and minTrustLevel=marginal' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel marginal && + test_must_fail git pull --ff-only --verify-signatures untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit with untrusted signature with --verify-signatures and minTrustLevel=undefined' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel undefined && + git pull --ff-only --verify-signatures untrusted >pulloutput && + test_i18ngrep "has a good GPG signature" pulloutput +' + test_expect_success GPG 'pull signed commit with --verify-signatures' ' test_when_finished "git reset --hard && git checkout initial" && git pull --verify-signatures signed >pulloutput && @@ -79,10 +100,53 @@ test_expect_success GPG 'pull commit with bad signature with --no-verify-signatu ' test_expect_success GPG 'pull unsigned commit into unborn branch' ' + test_when_finished "rm -rf empty-repo" && git init empty-repo && test_must_fail \ git -C empty-repo pull --verify-signatures .. 2>pullerror && test_i18ngrep "does not have a GPG signature" pullerror ' +test_expect_success GPG 'pull commit into unborn branch with bad signature and --verify-signatures' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_must_fail \ + git -C empty-repo pull --ff-only --verify-signatures ../bad 2>pullerror && + test_i18ngrep "has a bad GPG signature" pullerror +' + +test_expect_success GPG 'pull commit into unborn branch with untrusted signature and --verify-signatures' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_must_fail \ + git -C empty-repo pull --ff-only --verify-signatures ../untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit into unborn branch with untrusted signature and --verify-signatures and minTrustLevel=ultimate' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_config_global gpg.minTrustLevel ultimate && + test_must_fail \ + git -C empty-repo pull --ff-only --verify-signatures ../untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit into unborn branch with untrusted signature and --verify-signatures and minTrustLevel=marginal' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_config_global gpg.minTrustLevel marginal && + test_must_fail \ + git -C empty-repo pull --ff-only --verify-signatures ../untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit into unborn branch with untrusted signature and --verify-signatures and minTrustLevel=undefined' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_config_global gpg.minTrustLevel undefined && + git -C empty-repo pull --ff-only --verify-signatures ../untrusted >pulloutput && + test_i18ngrep "has a good GPG signature" pulloutput +' + test_done diff --git a/t/t5580-clone-push-unc.sh b/t/t5580-unc-paths.sh index b3c8a92450..cf768b3a27 100755 --- a/t/t5580-clone-push-unc.sh +++ b/t/t5580-unc-paths.sh @@ -40,11 +40,23 @@ test_expect_success clone ' git clone "file://$UNCPATH" clone ' +test_expect_success 'clone without file://' ' + git clone "$UNCPATH" clone-without-file +' + test_expect_success 'clone with backslashed path' ' BACKSLASHED="$(echo "$UNCPATH" | tr / \\\\)" && git clone "$BACKSLASHED" backslashed ' +test_expect_success fetch ' + git init to-fetch && + ( + cd to-fetch && + git fetch "$UNCPATH" master + ) +' + test_expect_success push ' ( cd clone && @@ -58,7 +70,7 @@ test_expect_success push ' test_expect_success MINGW 'remote nick cannot contain backslashes' ' BACKSLASHED="$(winpwd | tr / \\\\)" && - git ls-remote "$BACKSLASHED" >out 2>err && + git ls-remote "$BACKSLASHED" 2>err && test_i18ngrep ! "unable to access" err ' diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index ad8c41176e..84ea2a3eb7 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -635,10 +635,10 @@ partial_clone_server () { rm -rf "$SERVER" client && test_create_repo "$SERVER" && test_commit -C "$SERVER" one && - HASH1=$(git hash-object "$SERVER/one.t") && + HASH1=$(git -C "$SERVER" hash-object one.t) && git -C "$SERVER" revert HEAD && test_commit -C "$SERVER" two && - HASH2=$(git hash-object "$SERVER/two.t") && + HASH2=$(git -C "$SERVER" hash-object two.t) && test_config -C "$SERVER" uploadpack.allowfilter 1 && test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 } diff --git a/t/t5604-clone-reference.sh b/t/t5604-clone-reference.sh index 4894237ab8..2f7be23044 100755 --- a/t/t5604-clone-reference.sh +++ b/t/t5604-clone-reference.sh @@ -175,7 +175,7 @@ test_expect_success 'clone using repo pointed at by gitfile as reference' ' test_expect_success 'clone and dissociate from reference' ' git init P && ( - cd P && test_commit one + cd P && test_commit one ) && git clone P Q && ( @@ -326,15 +326,16 @@ test_expect_success SYMLINKS 'clone repo with symlinked or unknown files at obje for raw in $(ls T*.raw) do sed -e "s!/../!/Y/!; s![0-9a-f]\{38,\}!Z!" -e "/commit-graph/d" \ - -e "/multi-pack-index/d" <$raw >$raw.de-sha || return 1 + -e "/multi-pack-index/d" <$raw >$raw.de-sha-1 && + sort $raw.de-sha-1 >$raw.de-sha || return 1 done && cat >expected-files <<-EOF && ./Y/Z ./Y/Z + ./Y/Z ./a-loose-dir/Z ./an-object - ./Y/Z ./info/packs ./pack/pack-Z.idx ./pack/pack-Z.pack diff --git a/t/t5607-clone-bundle.sh b/t/t5607-clone-bundle.sh index b7a3fdf02d..6d5a977fcb 100755 --- a/t/t5607-clone-bundle.sh +++ b/t/t5607-clone-bundle.sh @@ -16,7 +16,7 @@ test_expect_success 'setup' ' test_expect_success '"verify" needs a worktree' ' git bundle create tip.bundle -1 master && - test_must_fail nongit git bundle verify ../tip.bundle 2>err && + nongit test_must_fail git bundle verify ../tip.bundle 2>err && test_i18ngrep "need a repository" err ' @@ -64,7 +64,7 @@ test_expect_success 'ridiculously long subject in boundary' ' test -s heads && git fetch long-subject-bundle.bdl && sed -n "/^-/{p;q;}" long-subject-bundle.bdl >boundary && - grep "^-[0-9a-f]\\{40\\} " boundary + grep "^-$OID_REGEX " boundary ' test_expect_success 'prerequisites with an empty commit message' ' diff --git a/t/t5608-clone-2gb.sh b/t/t5608-clone-2gb.sh index 2c6bc07344..4c476d2fa1 100755 --- a/t/t5608-clone-2gb.sh +++ b/t/t5608-clone-2gb.sh @@ -3,14 +3,13 @@ test_description='Test cloning a repository larger than 2 gigabyte' . ./test-lib.sh -if test -z "$GIT_TEST_CLONE_2GB" +if ! test_bool_env GIT_TEST_CLONE_2GB false then - say 'Skipping expensive 2GB clone test; enable it with GIT_TEST_CLONE_2GB=t' -else - test_set_prereq CLONE_2GB + skip_all='expensive 2GB clone test; enable with GIT_TEST_CLONE_2GB=true' + test_done fi -test_expect_success CLONE_2GB 'setup' ' +test_expect_success 'setup' ' git config pack.compression 0 && git config pack.depth 0 && @@ -38,13 +37,13 @@ test_expect_success CLONE_2GB 'setup' ' ' -test_expect_success CLONE_2GB 'clone - bare' ' +test_expect_success 'clone - bare' ' git clone --bare --no-hardlinks . clone-bare ' -test_expect_success CLONE_2GB 'clone - with worktree, file:// protocol' ' +test_expect_success 'clone - with worktree, file:// protocol' ' git clone "file://$(pwd)" clone-wt diff --git a/t/t5611-clone-config.sh b/t/t5611-clone-config.sh index 60c1ba951b..8e0fd39823 100755 --- a/t/t5611-clone-config.sh +++ b/t/t5611-clone-config.sh @@ -92,24 +92,17 @@ test_expect_success 'clone -c remote.<remote>.fetch=<refspec> --origin=<name>' ' test_cmp expect actual ' -# Tests for the hidden file attribute on windows -is_hidden () { - # Use the output of `attrib`, ignore the absolute path - case "$(attrib "$1")" in *H*?:*) return 0;; esac - return 1 -} - test_expect_success MINGW 'clone -c core.hideDotFiles' ' test_commit attributes .gitattributes "" && rm -rf child && git clone -c core.hideDotFiles=false . child && - ! is_hidden child/.gitattributes && + ! test_path_is_hidden child/.gitattributes && rm -rf child && git clone -c core.hideDotFiles=dotGitOnly . child && - ! is_hidden child/.gitattributes && + ! test_path_is_hidden child/.gitattributes && rm -rf child && git clone -c core.hideDotFiles=true . child && - is_hidden child/.gitattributes + test_path_is_hidden child/.gitattributes ' test_done diff --git a/t/t5612-clone-refspec.sh b/t/t5612-clone-refspec.sh index e36ac01661..e3b436d8ae 100755 --- a/t/t5612-clone-refspec.sh +++ b/t/t5612-clone-refspec.sh @@ -71,9 +71,9 @@ test_expect_success 'by default all branches will be kept updated' ' ( cd dir_all && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # follow both master and side git for-each-ref refs/heads >expect && @@ -87,7 +87,7 @@ test_expect_success 'by default no tags will be kept updated' ' git for-each-ref refs/tags >../actual ) && git for-each-ref refs/tags >expect && - test_must_fail test_cmp expect actual && + ! test_cmp expect actual && test_line_count = 2 actual ' @@ -104,9 +104,9 @@ test_expect_success '--single-branch while HEAD pointing at master' ' ( cd dir_master && git fetch --force && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # only follow master git for-each-ref refs/heads/master >expect && @@ -126,9 +126,9 @@ test_expect_success '--single-branch while HEAD pointing at master and --no-tags ( cd dir_master_no_tags && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # only follow master git for-each-ref refs/heads/master >expect && @@ -156,9 +156,9 @@ test_expect_success '--single-branch while HEAD pointing at side' ' ( cd dir_side && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # only follow side git for-each-ref refs/heads/side >expect && @@ -169,9 +169,9 @@ test_expect_success '--single-branch with explicit --branch side' ' ( cd dir_side2 && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # only follow side git for-each-ref refs/heads/side >expect && @@ -223,9 +223,9 @@ test_expect_success '--single-branch with detached' ' ( cd dir_detached && git fetch && - git for-each-ref refs/remotes/origin | + git for-each-ref refs/remotes/origin >refs && sed -e "/HEAD$/d" \ - -e "s|/remotes/origin/|/heads/|" >../actual + -e "s|/remotes/origin/|/heads/|" refs >../actual ) && # nothing test_must_be_empty actual diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh index 79f7b65f8c..8a27452a51 100755 --- a/t/t5616-partial-clone.sh +++ b/t/t5616-partial-clone.sh @@ -46,6 +46,14 @@ test_expect_success 'do partial clone 1' ' test "$(git -C pc1 config --local remote.origin.partialclonefilter)" = "blob:none" ' +test_expect_success 'verify that .promisor file contains refs fetched' ' + ls pc1/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + git -C srv.bare rev-parse --verify HEAD >headhash && + grep "$(cat headhash) HEAD" $(cat promisorlist) && + grep "$(cat headhash) refs/heads/master" $(cat promisorlist) +' + # checkout master to force dynamic object fetch of blobs at HEAD. test_expect_success 'verify checkout with dynamic object fetch' ' git -C pc1 rev-list --quiet --objects --missing=print HEAD >observed && @@ -296,6 +304,124 @@ test_expect_success 'partial clone with unresolvable sparse filter fails cleanly test_i18ngrep "unable to parse sparse filter data in" err ' +setup_triangle () { + rm -rf big-blob.txt server client promisor-remote && + + printf "line %d\n" $(test_seq 1 100) >big-blob.txt && + + # Create a server with 2 commits: a commit with a big tree and a child + # commit with an incremental change. Also, create a partial clone + # client that only contains the first commit. + git init server && + git -C server config --local uploadpack.allowfilter 1 && + for i in $(test_seq 1 100) + do + echo "make the tree big" >server/file$i && + git -C server add file$i + done && + git -C server commit -m "initial" && + git clone --bare --filter=tree:0 "file://$(pwd)/server" client && + echo another line >>server/file1 && + git -C server commit -am "incremental change" && + + # Create a promisor remote that only contains the tree and blob from + # the first commit. + git init promisor-remote && + git -C server config --local uploadpack.allowanysha1inwant 1 && + TREE_HASH=$(git -C server rev-parse HEAD~1^{tree}) && + git -C promisor-remote fetch --keep "file://$(pwd)/server" "$TREE_HASH" && + git -C promisor-remote count-objects -v >object-count && + test_i18ngrep "count: 0" object-count && + test_i18ngrep "in-pack: 2" object-count && + + # Set it as the promisor remote of client. Thus, whenever + # the client lazy fetches, the lazy fetch will succeed only if it is + # for this tree or blob. + test_commit -C promisor-remote one && # so that ref advertisement is not empty + git -C promisor-remote config --local uploadpack.allowanysha1inwant 1 && + git -C client remote set-url origin "file://$(pwd)/promisor-remote" +} + +# NEEDSWORK: The tests beginning with "fetch lazy-fetches" below only +# test that "fetch" avoid fetching trees and blobs, but not commits or +# tags. Revisit this if Git is ever taught to support partial clones +# with commits and/or tags filtered out. + +test_expect_success 'fetch lazy-fetches only to resolve deltas' ' + setup_triangle && + + # Exercise to make sure it works. Git will not fetch anything from the + # promisor remote other than for the big tree (because it needs to + # resolve the delta). + GIT_TRACE_PACKET="$(pwd)/trace" git -C client \ + fetch "file://$(pwd)/server" master && + + # Verify the assumption that the client needed to fetch the delta base + # to resolve the delta. + git -C server rev-parse HEAD~1^{tree} >hash && + grep "want $(cat hash)" trace +' + +test_expect_success 'fetch lazy-fetches only to resolve deltas, protocol v2' ' + setup_triangle && + + git -C server config --local protocol.version 2 && + git -C client config --local protocol.version 2 && + git -C promisor-remote config --local protocol.version 2 && + + # Exercise to make sure it works. Git will not fetch anything from the + # promisor remote other than for the big blob (because it needs to + # resolve the delta). + GIT_TRACE_PACKET="$(pwd)/trace" git -C client \ + fetch "file://$(pwd)/server" master && + + # Verify that protocol version 2 was used. + grep "fetch< version 2" trace && + + # Verify the assumption that the client needed to fetch the delta base + # to resolve the delta. + git -C server rev-parse HEAD~1^{tree} >hash && + grep "want $(cat hash)" trace +' + +# The following two tests must be in this order. It is important that +# the srv.bare repository did not have tags during clone, but has tags +# in the fetch. + +test_expect_success 'verify fetch succeeds when asking for new tags' ' + git clone --filter=blob:none "file://$(pwd)/srv.bare" tag-test && + for i in I J K + do + test_commit -C src $i && + git -C src branch $i || return 1 + done && + git -C srv.bare fetch --tags origin +refs/heads/*:refs/heads/* && + git -C tag-test -c protocol.version=2 fetch --tags origin +' + +test_expect_success 'verify fetch downloads only one pack when updating refs' ' + git clone --filter=blob:none "file://$(pwd)/srv.bare" pack-test && + ls pack-test/.git/objects/pack/*pack >pack-list && + test_line_count = 2 pack-list && + for i in A B C + do + test_commit -C src $i && + git -C src branch $i || return 1 + done && + git -C srv.bare fetch origin +refs/heads/*:refs/heads/* && + git -C pack-test fetch origin && + ls pack-test/.git/objects/pack/*pack >pack-list && + test_line_count = 3 pack-list +' + +test_expect_success 'single-branch tag following respects partial clone' ' + git clone --single-branch -b B --filter=blob:none \ + "file://$(pwd)/srv.bare" single && + git -C single rev-parse --verify refs/tags/B && + git -C single rev-parse --verify refs/tags/A && + test_must_fail git -C single rev-parse --verify refs/tags/C +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd @@ -310,14 +436,18 @@ intersperse () { sed 's/\(..\)/'$1'\1/g' } -# Create a one-time-sed command to replace the existing packfile with $1. +# Create a one-time-perl command to replace the existing packfile with $1. replace_packfile () { # The protocol requires that the packfile be sent in sideband 1, hence # the extra \x01 byte at the beginning. - printf "1,/packfile/!c %04x\\\\x01%s0000" \ - "$(($(wc -c <$1) + 5))" \ - "$(hex_unpack <$1 | intersperse '\\x')" \ - >"$HTTPD_ROOT_PATH/one-time-sed" + cp $1 "$HTTPD_ROOT_PATH/one-time-pack" && + echo 'if (/packfile/) { + print; + my $length = -s "one-time-pack"; + printf "%04x\x01", $length + 5; + print `cat one-time-pack` . "0000"; + last + }' >"$HTTPD_ROOT_PATH/one-time-perl" } test_expect_success 'upon cloning, check that all refs point to objects' ' @@ -341,16 +471,16 @@ test_expect_success 'upon cloning, check that all refs point to objects' ' # \x01 byte at the beginning. replace_packfile incomplete.pack && - # Use protocol v2 because the sed command looks for the "packfile" + # Use protocol v2 because the perl command looks for the "packfile" # section header. test_config -C "$SERVER" protocol.version 2 && test_must_fail git -c protocol.version=2 clone \ - --filter=blob:none $HTTPD_URL/one_time_sed/server repo 2>err && + --filter=blob:none $HTTPD_URL/one_time_perl/server repo 2>err && test_i18ngrep "did not send all necessary objects" err && - # Ensure that the one-time-sed script was used. - ! test -e "$HTTPD_ROOT_PATH/one-time-sed" + # Ensure that the one-time-perl script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-perl" ' test_expect_success 'when partial cloning, tolerate server not sending target of tag' ' @@ -381,17 +511,17 @@ test_expect_success 'when partial cloning, tolerate server not sending target of # \x01 byte at the beginning. replace_packfile incomplete.pack && - # Use protocol v2 because the sed command looks for the "packfile" + # Use protocol v2 because the perl command looks for the "packfile" # section header. test_config -C "$SERVER" protocol.version 2 && # Exercise to make sure it works. git -c protocol.version=2 clone \ - --filter=blob:none $HTTPD_URL/one_time_sed/server repo 2> err && + --filter=blob:none $HTTPD_URL/one_time_perl/server repo 2> err && ! grep "missing object referenced by" err && - # Ensure that the one-time-sed script was used. - ! test -e "$HTTPD_ROOT_PATH/one-time-sed" + # Ensure that the one-time-perl script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-perl" ' test_expect_success 'tolerate server sending REF_DELTA against missing promisor objects' ' @@ -414,7 +544,7 @@ test_expect_success 'tolerate server sending REF_DELTA against missing promisor # Clone. The client has deltabase_have but not deltabase_missing. git -c protocol.version=2 clone --no-checkout \ - --filter=blob:none $HTTPD_URL/one_time_sed/server repo && + --filter=blob:none $HTTPD_URL/one_time_perl/server repo && git -C repo hash-object -w -- "$SERVER/have.txt" && # Sanity check to ensure that the client does not have @@ -455,7 +585,7 @@ test_expect_success 'tolerate server sending REF_DELTA against missing promisor replace_packfile thin.pack && - # Use protocol v2 because the sed command looks for the "packfile" + # Use protocol v2 because the perl command looks for the "packfile" # section header. test_config -C "$SERVER" protocol.version 2 && @@ -468,8 +598,8 @@ test_expect_success 'tolerate server sending REF_DELTA against missing promisor grep "want $(cat deltabase_missing)" trace && ! grep "want $(cat deltabase_have)" trace && - # Ensure that the one-time-sed script was used. - ! test -e "$HTTPD_ROOT_PATH/one-time-sed" + # Ensure that the one-time-perl script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-perl" ' # DO NOT add non-httpd-specific tests here, because the last part of this diff --git a/t/t5617-clone-submodules-remote.sh b/t/t5617-clone-submodules-remote.sh index 37fcce9c40..1a041df10b 100755 --- a/t/t5617-clone-submodules-remote.sh +++ b/t/t5617-clone-submodules-remote.sh @@ -14,7 +14,8 @@ test_expect_success 'setup' ' cd sub && git init && test_commit subcommit1 && - git tag sub_when_added_to_super + git tag sub_when_added_to_super && + git branch other ) && git submodule add "file://$pwd/sub" sub && git commit -m "add submodule" && @@ -51,4 +52,14 @@ test_expect_success 'check the default is --no-remote-submodules' ' ) ' +test_expect_success 'clone with --single-branch' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --single-branch "file://$pwd/." super_clone && + ( + cd super_clone/sub && + git rev-parse --verify origin/master && + test_must_fail git rev-parse --verify origin/other + ) +' + test_done diff --git a/t/t5700-protocol-v1.sh b/t/t5700-protocol-v1.sh index 2571eb90b7..022901b9eb 100755 --- a/t/t5700-protocol-v1.sh +++ b/t/t5700-protocol-v1.sh @@ -5,7 +5,8 @@ test_description='test git wire-protocol transition' TEST_NO_CREATE_REPO=1 # This is a protocol-specific test. -GIT_TEST_PROTOCOL_VERSION= +GIT_TEST_PROTOCOL_VERSION=0 +export GIT_TEST_PROTOCOL_VERSION . ./test-lib.sh diff --git a/t/t5702-protocol-v2.sh b/t/t5702-protocol-v2.sh index ae9175cedf..8da65e60de 100755 --- a/t/t5702-protocol-v2.sh +++ b/t/t5702-protocol-v2.sh @@ -32,7 +32,7 @@ test_expect_success 'list refs with git:// using protocol v2' ' test_cmp expect actual ' -test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' +test_expect_success 'ref advertisement is filtered with ls-remote using protocol v2' ' test_when_finished "rm -f log" && GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ @@ -154,7 +154,7 @@ test_expect_success 'list refs with file:// using protocol v2' ' test_cmp expect actual ' -test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' +test_expect_success 'ref advertisement is filtered with ls-remote using protocol v2' ' test_when_finished "rm -f log" && GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ @@ -225,7 +225,7 @@ test_expect_success 'fetch with file:// using protocol v2' ' grep "fetch< version 2" log ' -test_expect_success 'ref advertisment is filtered during fetch using protocol v2' ' +test_expect_success 'ref advertisement is filtered during fetch using protocol v2' ' test_when_finished "rm -f log" && test_commit -C file_parent three && @@ -586,6 +586,53 @@ test_expect_success 'clone with http:// using protocol v2' ' ! grep "Send header: Transfer-Encoding: chunked" log ' +test_expect_success 'clone repository with http:// using protocol v2 with incomplete pktline length' ' + test_when_finished "rm -f log" && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/incomplete_length" && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/incomplete_length" file && + + test_must_fail env GIT_TRACE_PACKET="$(pwd)/log" GIT_TRACE_CURL="$(pwd)/log" git -c protocol.version=2 \ + clone "$HTTPD_URL/smart/incomplete_length" incomplete_length_child 2>err && + + # Client requested to use protocol v2 + grep "Git-Protocol: version=2" log && + # Server responded using protocol v2 + grep "git< version 2" log && + # Client reported appropriate failure + test_i18ngrep "bytes of length header were received" err +' + +test_expect_success 'clone repository with http:// using protocol v2 with incomplete pktline body' ' + test_when_finished "rm -f log" && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/incomplete_body" && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/incomplete_body" file && + + test_must_fail env GIT_TRACE_PACKET="$(pwd)/log" GIT_TRACE_CURL="$(pwd)/log" git -c protocol.version=2 \ + clone "$HTTPD_URL/smart/incomplete_body" incomplete_body_child 2>err && + + # Client requested to use protocol v2 + grep "Git-Protocol: version=2" log && + # Server responded using protocol v2 + grep "git< version 2" log && + # Client reported appropriate failure + test_i18ngrep "bytes of body are still expected" err +' + +test_expect_success 'clone with http:// using protocol v2 and invalid parameters' ' + test_when_finished "rm -f log" && + + test_must_fail env GIT_TRACE_PACKET="$(pwd)/log" GIT_TRACE_CURL="$(pwd)/log" \ + git -c protocol.version=2 \ + clone --shallow-since=20151012 "$HTTPD_URL/smart/http_parent" http_child_invalid && + + # Client requested to use protocol v2 + grep "Git-Protocol: version=2" log && + # Server responded using protocol v2 + grep "git< version 2" log +' + test_expect_success 'clone big repository with http:// using protocol v2' ' test_when_finished "rm -f log" && @@ -665,6 +712,18 @@ test_expect_success 'fetch from namespaced repo respects namespaces' ' test_cmp expect actual ' +test_expect_success 'ls-remote with v2 http sends only one POST' ' + test_when_finished "rm -f log" && + + git ls-remote "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" >expect && + GIT_TRACE_CURL="$(pwd)/log" git -c protocol.version=2 \ + ls-remote "$HTTPD_URL/smart/http_parent" >actual && + test_cmp expect actual && + + grep "Send header: POST" log >posts && + test_line_count = 1 posts +' + test_expect_success 'push with http:// and a config of v2 does not request v2' ' test_when_finished "rm -f log" && # Till v2 for push is designed, make sure that if a client has @@ -682,9 +741,9 @@ test_expect_success 'push with http:// and a config of v2 does not request v2' ' git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s client_branch >expect && test_cmp expect actual && - # Client didnt request to use protocol v2 + # Client did not request to use protocol v2 ! grep "Git-Protocol: version=2" log && - # Server didnt respond using protocol v2 + # Server did not respond using protocol v2 ! grep "git< version 2" log ' @@ -700,11 +759,11 @@ test_expect_success 'when server sends "ready", expect DELIM' ' # After "ready" in the acknowledgments section, pretend that a FLUSH # (0000) was sent instead of a DELIM (0001). - printf "/ready/,$ s/0001/0000/" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && + printf "\$ready = 1 if /ready/; \$ready && s/0001/0000/" \ + >"$HTTPD_ROOT_PATH/one-time-perl" && test_must_fail git -C http_child -c protocol.version=2 \ - fetch "$HTTPD_URL/one_time_sed/http_parent" 2> err && + fetch "$HTTPD_URL/one_time_perl/http_parent" 2> err && test_i18ngrep "expected packfile to be sent after .ready." err ' @@ -725,12 +784,12 @@ test_expect_success 'when server does not send "ready", expect FLUSH' ' # After the acknowledgments section, pretend that a DELIM # (0001) was sent instead of a FLUSH (0000). - printf "/acknowledgments/,$ s/0000/0001/" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && + printf "\$ack = 1 if /acknowledgments/; \$ack && s/0000/0001/" \ + >"$HTTPD_ROOT_PATH/one-time-perl" && test_must_fail env GIT_TRACE_PACKET="$(pwd)/log" git -C http_child \ -c protocol.version=2 \ - fetch "$HTTPD_URL/one_time_sed/http_parent" 2> err && + fetch "$HTTPD_URL/one_time_perl/http_parent" 2> err && grep "fetch< .*acknowledgments" log && ! grep "fetch< .*ready" log && test_i18ngrep "expected no other sections to be sent after no .ready." err diff --git a/t/t5703-upload-pack-ref-in-want.sh b/t/t5703-upload-pack-ref-in-want.sh index 3a2c143c6d..92ad5eeec0 100755 --- a/t/t5703-upload-pack-ref-in-want.sh +++ b/t/t5703-upload-pack-ref-in-want.sh @@ -13,19 +13,18 @@ get_actual_refs () { } get_actual_commits () { - sed -n -e '/packfile/,/0000/{ - /packfile/d - p - }' <out | test-tool pkt-line unpack-sideband >o.pack && + test-tool pkt-line unpack-sideband <out >o.pack && git index-pack o.pack && - git verify-pack -v o.idx | grep commit | cut -c-40 | sort >actual_commits + git verify-pack -v o.idx >objs && + grep commit objs | cut -d" " -f1 | sort >actual_commits } check_output () { get_actual_refs && test_cmp expected_refs actual_refs && get_actual_commits && - test_cmp expected_commits actual_commits + sort expected_commits >sorted_commits && + test_cmp sorted_commits actual_commits } # c(o/foo) d(o/bar) @@ -35,6 +34,7 @@ check_output () { # \ | / # a test_expect_success 'setup repository' ' + test_oid_init && test_commit a && git checkout -b o/foo && test_commit b && @@ -49,15 +49,18 @@ test_expect_success 'setup repository' ' test_expect_success 'config controls ref-in-want advertisement' ' test-tool serve-v2 --advertise-capabilities >out && - ! grep -a ref-in-want out && + perl -ne "/ref-in-want/ and print" out >out.filter && + test_must_be_empty out.filter && git config uploadpack.allowRefInWant false && test-tool serve-v2 --advertise-capabilities >out && - ! grep -a ref-in-want out && + perl -ne "/ref-in-want/ and print" out >out.filter && + test_must_be_empty out.filter && git config uploadpack.allowRefInWant true && test-tool serve-v2 --advertise-capabilities >out && - grep -a ref-in-want out + perl -ne "/ref-in-want/ and print" out >out.filter && + test_file_not_empty out.filter ' test_expect_success 'invalid want-ref line' ' @@ -75,17 +78,19 @@ test_expect_success 'invalid want-ref line' ' ' test_expect_success 'basic want-ref' ' + oid=$(git rev-parse f) && cat >expected_refs <<-EOF && - $(git rev-parse f) refs/heads/master + $oid refs/heads/master EOF - git rev-parse f | sort >expected_commits && + git rev-parse f >expected_commits && + oid=$(git rev-parse a) && test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress want-ref refs/heads/master - have $(git rev-parse a) + have $oid done 0000 EOF @@ -95,19 +100,22 @@ test_expect_success 'basic want-ref' ' ' test_expect_success 'multiple want-ref lines' ' + oid_c=$(git rev-parse c) && + oid_d=$(git rev-parse d) && cat >expected_refs <<-EOF && - $(git rev-parse c) refs/heads/o/foo - $(git rev-parse d) refs/heads/o/bar + $oid_c refs/heads/o/foo + $oid_d refs/heads/o/bar EOF - git rev-parse c d | sort >expected_commits && + git rev-parse c d >expected_commits && + oid=$(git rev-parse b) && test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress want-ref refs/heads/o/foo want-ref refs/heads/o/bar - have $(git rev-parse b) + have $oid done 0000 EOF @@ -117,10 +125,11 @@ test_expect_success 'multiple want-ref lines' ' ' test_expect_success 'mix want and want-ref' ' + oid=$(git rev-parse f) && cat >expected_refs <<-EOF && - $(git rev-parse f) refs/heads/master + $oid refs/heads/master EOF - git rev-parse e f | sort >expected_commits && + git rev-parse e f >expected_commits && test-tool pkt-line pack >in <<-EOF && command=fetch @@ -138,17 +147,19 @@ test_expect_success 'mix want and want-ref' ' ' test_expect_success 'want-ref with ref we already have commit for' ' + oid=$(git rev-parse c) && cat >expected_refs <<-EOF && - $(git rev-parse c) refs/heads/o/foo + $oid refs/heads/o/foo EOF >expected_commits && + oid=$(git rev-parse c) && test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress want-ref refs/heads/o/foo - have $(git rev-parse c) + have $oid done 0000 EOF @@ -211,13 +222,14 @@ test_expect_success 'fetching with exact OID' ' rm -rf local && cp -r "$LOCAL_PRISTINE" local && + oid=$(git -C "$REPO" rev-parse d) && GIT_TRACE_PACKET="$(pwd)/log" git -C local fetch origin \ - $(git -C "$REPO" rev-parse d):refs/heads/actual && + "$oid":refs/heads/actual && git -C "$REPO" rev-parse "d" >expected && git -C local rev-parse refs/heads/actual >actual && test_cmp expected actual && - grep "want $(git -C "$REPO" rev-parse d)" log + grep "want $oid" log ' test_expect_success 'fetching multiple refs' ' @@ -239,13 +251,14 @@ test_expect_success 'fetching ref and exact OID' ' rm -rf local && cp -r "$LOCAL_PRISTINE" local && + oid=$(git -C "$REPO" rev-parse b) && GIT_TRACE_PACKET="$(pwd)/log" git -C local fetch origin \ - master $(git -C "$REPO" rev-parse b):refs/heads/actual && + master "$oid":refs/heads/actual && git -C "$REPO" rev-parse "master" "b" >expected && git -C local rev-parse refs/remotes/origin/master refs/heads/actual >actual && test_cmp expected actual && - grep "want $(git -C "$REPO" rev-parse b)" log && + grep "want $oid" log && grep "want-ref refs/heads/master" log ' @@ -301,7 +314,7 @@ test_expect_success 'setup repos for change-while-negotiating test' ' test_commit m3 && git tag -d m2 m3 ) && - git -C "$LOCAL_PRISTINE" remote set-url origin "http://127.0.0.1:$LIB_HTTPD_PORT/one_time_sed/repo" && + git -C "$LOCAL_PRISTINE" remote set-url origin "http://127.0.0.1:$LIB_HTTPD_PORT/one_time_perl/repo" && git -C "$LOCAL_PRISTINE" config protocol.version 2 ' @@ -312,17 +325,16 @@ inconsistency () { # repository appears to change during negotiation, for example, when # different servers in a load-balancing arrangement serve (stateless) # RPCs during a single negotiation. - printf "s/%s/%s/" \ - $(git -C "$REPO" rev-parse $1 | tr -d "\n") \ - $(git -C "$REPO" rev-parse $2 | tr -d "\n") \ - >"$HTTPD_ROOT_PATH/one-time-sed" + oid1=$(git -C "$REPO" rev-parse $1) && + oid2=$(git -C "$REPO" rev-parse $2) && + echo "s/$oid1/$oid2/" >"$HTTPD_ROOT_PATH/one-time-perl" } test_expect_success 'server is initially ahead - no ref in want' ' git -C "$REPO" config uploadpack.allowRefInWant false && rm -rf local && cp -r "$LOCAL_PRISTINE" local && - inconsistency master 1234567890123456789012345678901234567890 && + inconsistency master $(test_oid numeric) && test_must_fail git -C local fetch 2>err && test_i18ngrep "fatal: remote error: upload-pack: not our ref" err ' @@ -331,7 +343,7 @@ test_expect_success 'server is initially ahead - ref in want' ' git -C "$REPO" config uploadpack.allowRefInWant true && rm -rf local && cp -r "$LOCAL_PRISTINE" local && - inconsistency master 1234567890123456789012345678901234567890 && + inconsistency master $(test_oid numeric) && git -C local fetch && git -C "$REPO" rev-parse --verify master >expected && @@ -367,7 +379,7 @@ test_expect_success 'server loses a ref - ref in want' ' git -C "$REPO" config uploadpack.allowRefInWant true && rm -rf local && cp -r "$LOCAL_PRISTINE" local && - echo "s/master/raster/" >"$HTTPD_ROOT_PATH/one-time-sed" && + echo "s/master/raster/" >"$HTTPD_ROOT_PATH/one-time-perl" && test_must_fail git -C local fetch 2>err && test_i18ngrep "fatal: remote error: unknown ref refs/heads/raster" err diff --git a/t/t5704-protocol-violations.sh b/t/t5704-protocol-violations.sh new file mode 100755 index 0000000000..950cfb21fe --- /dev/null +++ b/t/t5704-protocol-violations.sh @@ -0,0 +1,33 @@ +#!/bin/sh + +test_description='Test responses to violations of the network protocol. In most +of these cases it will generally be acceptable for one side to break off +communications if the other side says something unexpected. We are mostly +making sure that we do not segfault or otherwise behave badly.' +. ./test-lib.sh + +test_expect_success 'extra delim packet in v2 ls-refs args' ' + { + packetize command=ls-refs && + printf 0001 && + # protocol expects 0000 flush here + printf 0001 + } >input && + test_must_fail env GIT_PROTOCOL=version=2 \ + git upload-pack . <input 2>err && + test_i18ngrep "expected flush after ls-refs arguments" err +' + +test_expect_success 'extra delim packet in v2 fetch args' ' + { + packetize command=fetch && + printf 0001 && + # protocol expects 0000 flush here + printf 0001 + } >input && + test_must_fail env GIT_PROTOCOL=version=2 \ + git upload-pack . <input 2>err && + test_i18ngrep "expected flush after fetch arguments" err +' + +test_done diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh index 121e5c6edb..0f04b6cddb 100755 --- a/t/t5801-remote-helpers.sh +++ b/t/t5801-remote-helpers.sh @@ -11,9 +11,15 @@ test_description='Test remote-helper import and export commands' PATH="$TEST_DIRECTORY/t5801:$PATH" compare_refs() { + fail= && + if test "x$1" = 'x!' + then + fail='!' && + shift + fi && git --git-dir="$1/.git" rev-parse --verify $2 >expect && git --git-dir="$3/.git" rev-parse --verify $4 >actual && - test_cmp expect actual + eval $fail test_cmp expect actual } test_expect_success 'setup repository' ' @@ -189,7 +195,7 @@ test_expect_success GPG 'push signed tag' ' git push origin signed-tag ) && compare_refs local signed-tag^{} server signed-tag^{} && - test_must_fail compare_refs local signed-tag server signed-tag + compare_refs ! local signed-tag server signed-tag ' test_expect_success GPG 'push signed tag with signed-tags capability' ' diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh index b8cf82349b..3dc1ad8f71 100755 --- a/t/t6000-rev-list-misc.sh +++ b/t/t6000-rev-list-misc.sh @@ -104,13 +104,16 @@ test_expect_success 'rev-list can show index objects' ' # - we do not show the root tree; since we updated the index, it # does not have a valid cache tree # - cat >expect <<-\EOF && - 8e4020bb5a8d8c873b25de15933e75cc0fc275df one - d9d3a7417b9605cfd88ee6306b28dadc29e6ab08 only-in-index - 9200b628cf9dc883a85a7abc8d6e6730baee589c two - EOF echo only-in-index >only-in-index && test_when_finished "git reset --hard" && + rev1=$(git rev-parse HEAD:one) && + rev2=$(git rev-parse HEAD:two) && + revi=$(git hash-object only-in-index) && + cat >expect <<-EOF && + $rev1 one + $revi only-in-index + $rev2 two + EOF git add only-in-index && git rev-list --objects --indexed-objects >actual && test_cmp expect actual @@ -148,4 +151,16 @@ test_expect_success 'rev-list --end-of-options' ' test_cmp expect actual ' +test_expect_success 'rev-list --count' ' + count=$(git rev-list --count HEAD) && + git rev-list HEAD >actual && + test_line_count = $count actual +' + +test_expect_success 'rev-list --count --objects' ' + count=$(git rev-list --count --objects HEAD) && + git rev-list --objects HEAD >actual && + test_line_count = $count actual +' + test_done diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index cfb74d0e03..7e82e43a63 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -32,6 +32,7 @@ changed_iso88591=$(echo "$changed" | iconv -f utf-8 -t $test_encoding) truncate_count=20 test_expect_success 'setup' ' + test_oid_init && : >foo && git add foo && git config i18n.commitEncoding $test_encoding && @@ -109,31 +110,35 @@ commit $head1 EOF # we don't test relative here -test_format author %an%n%ae%n%ad%n%aD%n%at <<EOF +test_format author %an%n%ae%n%al%n%ad%n%aD%n%at <<EOF commit $head2 -A U Thor -author@example.com +$GIT_AUTHOR_NAME +$GIT_AUTHOR_EMAIL +$TEST_AUTHOR_LOCALNAME Thu Apr 7 15:13:13 2005 -0700 Thu, 7 Apr 2005 15:13:13 -0700 1112911993 commit $head1 -A U Thor -author@example.com +$GIT_AUTHOR_NAME +$GIT_AUTHOR_EMAIL +$TEST_AUTHOR_LOCALNAME Thu Apr 7 15:13:13 2005 -0700 Thu, 7 Apr 2005 15:13:13 -0700 1112911993 EOF -test_format committer %cn%n%ce%n%cd%n%cD%n%ct <<EOF +test_format committer %cn%n%ce%n%cl%n%cd%n%cD%n%ct <<EOF commit $head2 -C O Mitter -committer@example.com +$GIT_COMMITTER_NAME +$GIT_COMMITTER_EMAIL +$TEST_COMMITTER_LOCALNAME Thu Apr 7 15:13:13 2005 -0700 Thu, 7 Apr 2005 15:13:13 -0700 1112911993 commit $head1 -C O Mitter -committer@example.com +$GIT_COMMITTER_NAME +$GIT_COMMITTER_EMAIL +$TEST_COMMITTER_LOCALNAME Thu Apr 7 15:13:13 2005 -0700 Thu, 7 Apr 2005 15:13:13 -0700 1112911993 @@ -410,7 +415,7 @@ test_expect_success 'empty email' ' test_tick && C=$(GIT_AUTHOR_EMAIL= git commit-tree HEAD^{tree} </dev/null) && A=$(git show --pretty=format:%an,%ae,%ad%n -s $C) && - verbose test "$A" = "A U Thor,,Thu Apr 7 15:14:13 2005 -0700" + verbose test "$A" = "$GIT_AUTHOR_NAME,,Thu Apr 7 15:14:13 2005 -0700" ' test_expect_success 'del LF before empty (1)' ' @@ -459,9 +464,10 @@ test_expect_success '--abbrev' ' ' test_expect_success '%H is not affected by --abbrev-commit' ' + expected=$(($(test_oid hexsz) + 1)) && git log -1 --format=%H --abbrev-commit --abbrev=20 HEAD >actual && len=$(wc -c <actual) && - test $len = 41 + test $len = $expected ' test_expect_success '%h is not affected by --abbrev-commit' ' @@ -495,7 +501,7 @@ test_expect_success '%gd shortens ref name' ' ' test_expect_success 'reflog identity' ' - echo "C O Mitter:committer@example.com" >expect && + echo "$GIT_COMMITTER_NAME:$GIT_COMMITTER_EMAIL" >expect && git log -g -1 --format="%gn:%ge" >actual && test_cmp expect actual ' diff --git a/t/t6012-rev-list-simplify.sh b/t/t6012-rev-list-simplify.sh index a10f0df02b..b6fa43ace0 100755 --- a/t/t6012-rev-list-simplify.sh +++ b/t/t6012-rev-list-simplify.sh @@ -154,4 +154,124 @@ test_expect_success '--full-diff is not affected by --parents' ' test_cmp expected actual ' +# +# Create a new history to demonstrate the value of --show-pulls +# with respect to the subtleties of simplified history, --full-history, +# and --simplify-merges. +# +# .-A---M-----C--N---O---P +# / / \ \ \/ / / +# I B \ R-'`-Z' / +# \ / \/ / +# \ / /\ / +# `---X--' `---Y--' +# +# This example is explained in Documentation/rev-list-options.txt + +test_expect_success 'rebuild repo' ' + rm -rf .git * && + git init && + git switch -c main && + + echo base >file && + git add file && + test_commit I && + + echo A >file && + git add file && + test_commit A && + + git switch -c branchB I && + echo B >file && + git add file && + test_commit B && + + git switch main && + test_must_fail git merge -m "M" B && + echo A >file && + echo B >>file && + git add file && + git merge --continue && + note M && + + echo C >other && + git add other && + test_commit C && + + git switch -c branchX I && + echo X >file && + git add file && + test_commit X && + + git switch -c branchR M && + git merge -m R -Xtheirs X && + note R && + + git switch main && + git merge -m N R && + note N && + + git switch -c branchY M && + echo Y >y && + git add y && + test_commit Y && + + git switch -c branchZ C && + echo Z >z && + git add z && + test_commit Z && + + git switch main && + git merge -m O Z && + note O && + + git merge -m P Y && + note P +' + +check_result 'X I' -- file +check_result 'N R X I' --show-pulls -- file + +check_result 'P O N R X M B A I' --full-history --topo-order -- file +check_result 'N R X M B A I' --simplify-merges --topo-order --show-pulls -- file +check_result 'R X M B A I' --simplify-merges --topo-order -- file +check_result 'N M A I' --first-parent -- file +check_result 'N M A I' --first-parent --show-pulls -- file + +# --ancestry-path implies --full-history +check_result 'P O N R M' --topo-order \ + --ancestry-path A..HEAD -- file +check_result 'P O N R M' --topo-order \ + --show-pulls \ + --ancestry-path A..HEAD -- file +check_result 'P O N R M' --topo-order \ + --full-history \ + --ancestry-path A..HEAD -- file +check_result 'R M' --topo-order \ + --simplify-merges \ + --ancestry-path A..HEAD -- file +check_result 'N R M' --topo-order \ + --simplify-merges --show-pulls \ + --ancestry-path A..HEAD -- file + +test_expect_success 'log --graph --simplify-merges --show-pulls' ' + cat >expect <<-\EOF && + * N + * R + |\ + | * X + * | M + |\ \ + | * | B + | |/ + * / A + |/ + * I + EOF + git log --graph --pretty="%s" \ + --simplify-merges --show-pulls \ + -- file >actual && + test_cmp expect actual +' + test_done diff --git a/t/t6016-rev-list-graph-simplify-history.sh b/t/t6016-rev-list-graph-simplify-history.sh index f7181d1d6a..f5e6e92f5b 100755 --- a/t/t6016-rev-list-graph-simplify-history.sh +++ b/t/t6016-rev-list-graph-simplify-history.sh @@ -67,11 +67,10 @@ test_expect_success '--graph --all' ' echo "| * $C4" >> expected && echo "| * $C3" >> expected && echo "* | $A5" >> expected && - echo "| | " >> expected && - echo "| \\ " >> expected && - echo "*-. \\ $A4" >> expected && - echo "|\\ \\ \\ " >> expected && - echo "| | |/ " >> expected && + echo "| | " >> expected && + echo "| \\ " >> expected && + echo "*-. | $A4" >> expected && + echo "|\\ \\| " >> expected && echo "| | * $C2" >> expected && echo "| | * $C1" >> expected && echo "| * | $B2" >> expected && @@ -97,11 +96,10 @@ test_expect_success '--graph --simplify-by-decoration' ' echo "| * $C4" >> expected && echo "| * $C3" >> expected && echo "* | $A5" >> expected && - echo "| | " >> expected && - echo "| \\ " >> expected && - echo "*-. \\ $A4" >> expected && - echo "|\\ \\ \\ " >> expected && - echo "| | |/ " >> expected && + echo "| | " >> expected && + echo "| \\ " >> expected && + echo "*-. | $A4" >> expected && + echo "|\\ \\| " >> expected && echo "| | * $C2" >> expected && echo "| | * $C1" >> expected && echo "| * | $B2" >> expected && @@ -131,9 +129,8 @@ test_expect_success '--graph --simplify-by-decoration prune branch B' ' echo "| * $C4" >> expected && echo "| * $C3" >> expected && echo "* | $A5" >> expected && - echo "* | $A4" >> expected && - echo "|\\ \\ " >> expected && - echo "| |/ " >> expected && + echo "* | $A4" >> expected && + echo "|\\| " >> expected && echo "| * $C2" >> expected && echo "| * $C1" >> expected && echo "* | $A3" >> expected && @@ -151,9 +148,8 @@ test_expect_success '--graph --full-history -- bar.txt' ' echo "|\\ " >> expected && echo "| * $C4" >> expected && echo "* | $A5" >> expected && - echo "* | $A4" >> expected && - echo "|\\ \\ " >> expected && - echo "| |/ " >> expected && + echo "* | $A4" >> expected && + echo "|\\| " >> expected && echo "* | $A3" >> expected && echo "|/ " >> expected && echo "* $A2" >> expected && @@ -255,7 +251,7 @@ test_expect_success '--graph --boundary ^C3' ' echo "* | | | $A3" >> expected && echo "o | | | $A2" >> expected && echo "|/ / / " >> expected && - echo "o | | $A1" >> expected && + echo "o / / $A1" >> expected && echo " / / " >> expected && echo "| o $C3" >> expected && echo "|/ " >> expected && diff --git a/t/t6019-rev-list-ancestry-path.sh b/t/t6019-rev-list-ancestry-path.sh index beadaf6cca..353f84313f 100755 --- a/t/t6019-rev-list-ancestry-path.sh +++ b/t/t6019-rev-list-ancestry-path.sh @@ -143,14 +143,14 @@ test_expect_success 'setup criss-cross' ' test_expect_success 'criss-cross: rev-list --ancestry-path cb..bc' ' (cd criss-cross && git rev-list --ancestry-path xcb..xbc > actual && - test -z "$(cat actual)") + test_must_be_empty actual) ' # no commits in repository descend from cb test_expect_success 'criss-cross: rev-list --ancestry-path --all ^cb' ' (cd criss-cross && git rev-list --ancestry-path --all ^xcb > actual && - test -z "$(cat actual)") + test_must_be_empty actual) ' test_done diff --git a/t/t6020-merge-df.sh b/t/t6020-merge-df.sh index 46b506b3b7..400a4cd139 100755 --- a/t/t6020-merge-df.sh +++ b/t/t6020-merge-df.sh @@ -83,9 +83,9 @@ test_expect_success 'modify/delete + directory/file conflict' ' test 4 -eq $(git ls-files -u | wc -l) && test 1 -eq $(git ls-files -o | wc -l) && - test -f letters/file && - test -f letters.txt && - test -f letters~modify + test_path_is_file letters/file && + test_path_is_file letters.txt && + test_path_is_file letters~modify ' test_expect_success 'modify/delete + directory/file conflict; other way' ' @@ -99,9 +99,52 @@ test_expect_success 'modify/delete + directory/file conflict; other way' ' test 4 -eq $(git ls-files -u | wc -l) && test 1 -eq $(git ls-files -o | wc -l) && - test -f letters/file && - test -f letters.txt && - test -f letters~HEAD + test_path_is_file letters/file && + test_path_is_file letters.txt && + test_path_is_file letters~HEAD +' + +test_expect_success 'Simple merge in repo with interesting pathnames' ' + # Simple lexicographic ordering of files and directories would be: + # foo + # foo/bar + # foo/bar-2 + # foo/bar/baz + # foo/bar-2/baz + # The fact that foo/bar-2 appears between foo/bar and foo/bar/baz + # can trip up some codepaths, and is the point of this test. + test_create_repo name-ordering && + ( + cd name-ordering && + + mkdir -p foo/bar && + mkdir -p foo/bar-2 && + >foo/bar/baz && + >foo/bar-2/baz && + git add . && + git commit -m initial && + + git branch main && + git branch other && + + git checkout other && + echo other >foo/bar-2/baz && + git add -u && + git commit -m other && + + git checkout main && + echo main >foo/bar/baz && + git add -u && + git commit -m main && + + git merge other && + git ls-files -s >out && + test_line_count = 2 out && + git rev-parse :0:foo/bar/baz :0:foo/bar-2/baz >actual && + git rev-parse HEAD~1:foo/bar/baz other:foo/bar-2/baz >expect && + test_cmp expect actual + ) + ' test_done diff --git a/t/t6021-merge-criss-cross.sh b/t/t6021-merge-criss-cross.sh index 213deecab1..9d5e992878 100755 --- a/t/t6021-merge-criss-cross.sh +++ b/t/t6021-merge-criss-cross.sh @@ -3,94 +3,65 @@ # Copyright (c) 2005 Fredrik Kuivinen # -# See http://marc.info/?l=git&m=111463358500362&w=2 for a +# See https://lore.kernel.org/git/Pine.LNX.4.44.0504271254120.4678-100000@wax.eds.org/ for a # nice description of what this is about. test_description='Test criss-cross merge' . ./test-lib.sh -test_expect_success 'prepare repository' \ -'echo "1 -2 -3 -4 -5 -6 -7 -8 -9" > file && -git add file && -git commit -m "Initial commit" file && -git branch A && -git branch B && -git checkout A && -echo "1 -2 -3 -4 -5 -6 -7 -8 changed in B8, branch A -9" > file && -git commit -m "B8" file && -git checkout B && -echo "1 -2 -3 changed in C3, branch B -4 -5 -6 -7 -8 -9 -" > file && -git commit -m "C3" file && -git branch C3 && -git merge -m "pre E3 merge" A && -echo "1 -2 -3 changed in E3, branch B. New file size -4 -5 -6 -7 -8 changed in B8, branch A -9 -" > file && -git commit -m "E3" file && -git checkout A && -git merge -m "pre D8 merge" C3 && -echo "1 -2 -3 changed in C3, branch B -4 -5 -6 -7 -8 changed in D8, branch A. New file size 2 -9" > file && -git commit -m D8 file' - -test_expect_success 'Criss-cross merge' 'git merge -m "final merge" B' - -cat > file-expect <<EOF -1 -2 -3 changed in E3, branch B. New file size -4 -5 -6 -7 -8 changed in D8, branch A. New file size 2 -9 -EOF - -test_expect_success 'Criss-cross merge result' 'cmp file file-expect' - -test_expect_success 'Criss-cross merge fails (-s resolve)' \ -'git reset --hard A^ && -test_must_fail git merge -s resolve -m "final merge" B' +test_expect_success 'prepare repository' ' + test_write_lines 1 2 3 4 5 6 7 8 9 >file && + git add file && + git commit -m "Initial commit" file && + + git branch A && + git branch B && + git checkout A && + + test_write_lines 1 2 3 4 5 6 7 "8 changed in B8, branch A" 9 >file && + git commit -m "B8" file && + git checkout B && + + test_write_lines 1 2 "3 changed in C3, branch B" 4 5 6 7 8 9 >file && + git commit -m "C3" file && + git branch C3 && + + git merge -m "pre E3 merge" A && + + test_write_lines 1 2 "3 changed in E3, branch B. New file size" 4 5 6 7 "8 changed in B8, branch A" 9 >file && + git commit -m "E3" file && + + git checkout A && + git merge -m "pre D8 merge" C3 && + test_write_lines 1 2 "3 changed in C3, branch B" 4 5 6 7 "8 changed in D8, branch A. New file size 2" 9 >file && + + git commit -m D8 file +' + +test_expect_success 'Criss-cross merge' ' + git merge -m "final merge" B +' + +test_expect_success 'Criss-cross merge result' ' + cat <<-\EOF >file-expect && + 1 + 2 + 3 changed in E3, branch B. New file size + 4 + 5 + 6 + 7 + 8 changed in D8, branch A. New file size 2 + 9 + EOF + + test_cmp file-expect file +' + +test_expect_success 'Criss-cross merge fails (-s resolve)' ' + git reset --hard A^ && + test_must_fail git merge -s resolve -m "final merge" B +' test_done diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh index 53cc9b2ffb..bbbba3dcbf 100755 --- a/t/t6022-merge-rename.sh +++ b/t/t6022-merge-rename.sh @@ -8,94 +8,94 @@ modify () { mv "$2.x" "$2" } -test_expect_success setup \ -' -cat >A <<\EOF && -a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa -b bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb -c cccccccccccccccccccccccccccccccccccccccccccccccc -d dddddddddddddddddddddddddddddddddddddddddddddddd -e eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee -f ffffffffffffffffffffffffffffffffffffffffffffffff -g gggggggggggggggggggggggggggggggggggggggggggggggg -h hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh -i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii -j jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj -k kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk -l llllllllllllllllllllllllllllllllllllllllllllllll -m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm -n nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn -o oooooooooooooooooooooooooooooooooooooooooooooooo -EOF - -cat >M <<\EOF && -A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA -B BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB -C CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC -D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD -E EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE -F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG -H HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH -I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII -J JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ -K KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK -L LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL -M MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM -N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN -O OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO -EOF - -git add A M && -git commit -m "initial has A and M" && -git branch white && -git branch red && -git branch blue && -git branch yellow && -git branch change && -git branch change+rename && - -sed -e "/^g /s/.*/g : master changes a line/" <A >A+ && -mv A+ A && -git commit -a -m "master updates A" && - -git checkout yellow && -rm -f M && -git commit -a -m "yellow removes M" && - -git checkout white && -sed -e "/^g /s/.*/g : white changes a line/" <A >B && -sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && -rm -f A M && -git update-index --add --remove A B M N && -git commit -m "white renames A->B, M->N" && - -git checkout red && -sed -e "/^g /s/.*/g : red changes a line/" <A >B && -sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && -rm -f A M && -git update-index --add --remove A B M N && -git commit -m "red renames A->B, M->N" && - -git checkout blue && -sed -e "/^g /s/.*/g : blue changes a line/" <A >C && -sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && -rm -f A M && -git update-index --add --remove A C M N && -git commit -m "blue renames A->C, M->N" && - -git checkout change && -sed -e "/^g /s/.*/g : changed line/" <A >A+ && -mv A+ A && -git commit -q -a -m "changed" && - -git checkout change+rename && -sed -e "/^g /s/.*/g : changed line/" <A >B && -rm A && -git update-index --add B && -git commit -q -a -m "changed and renamed" && - -git checkout master' +test_expect_success 'setup' ' + cat >A <<-\EOF && + a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa + b bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb + c cccccccccccccccccccccccccccccccccccccccccccccccc + d dddddddddddddddddddddddddddddddddddddddddddddddd + e eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee + f ffffffffffffffffffffffffffffffffffffffffffffffff + g gggggggggggggggggggggggggggggggggggggggggggggggg + h hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh + i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii + j jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj + k kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk + l llllllllllllllllllllllllllllllllllllllllllllllll + m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm + n nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn + o oooooooooooooooooooooooooooooooooooooooooooooooo + EOF + + cat >M <<-\EOF && + A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA + B BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB + C CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC + D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD + E EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE + F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF + G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG + H HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH + I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII + J JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ + K KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK + L LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL + M MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM + N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN + O OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO + EOF + + git add A M && + git commit -m "initial has A and M" && + git branch white && + git branch red && + git branch blue && + git branch yellow && + git branch change && + git branch change+rename && + + sed -e "/^g /s/.*/g : master changes a line/" <A >A+ && + mv A+ A && + git commit -a -m "master updates A" && + + git checkout yellow && + rm -f M && + git commit -a -m "yellow removes M" && + + git checkout white && + sed -e "/^g /s/.*/g : white changes a line/" <A >B && + sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && + rm -f A M && + git update-index --add --remove A B M N && + git commit -m "white renames A->B, M->N" && + + git checkout red && + sed -e "/^g /s/.*/g : red changes a line/" <A >B && + sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && + rm -f A M && + git update-index --add --remove A B M N && + git commit -m "red renames A->B, M->N" && + + git checkout blue && + sed -e "/^g /s/.*/g : blue changes a line/" <A >C && + sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && + rm -f A M && + git update-index --add --remove A C M N && + git commit -m "blue renames A->C, M->N" && + + git checkout change && + sed -e "/^g /s/.*/g : changed line/" <A >A+ && + mv A+ A && + git commit -q -a -m "changed" && + + git checkout change+rename && + sed -e "/^g /s/.*/g : changed line/" <A >B && + rm A && + git update-index --add B && + git commit -q -a -m "changed and renamed" && + + git checkout master +' test_expect_success 'pull renaming branch into unrenaming one' \ ' @@ -242,12 +242,24 @@ test_expect_success 'merge of identical changes in a renamed file' ' rm -f A M N && git reset --hard && git checkout change+rename && + + test-tool chmtime --get -3600 B >old-mtime && GIT_MERGE_VERBOSITY=3 git merge change >out && - test_i18ngrep "^Skipped B" out && + + test-tool chmtime --get B >new-mtime && + test_cmp old-mtime new-mtime && + git reset --hard HEAD^ && git checkout change && + + # A will be renamed to B; we check mtimes and file presence + test_path_is_missing B && + test-tool chmtime --get -3600 A >old-mtime && GIT_MERGE_VERBOSITY=3 git merge change+rename >out && - test_i18ngrep ! "^Skipped B" out + + test_path_is_missing A && + test-tool chmtime --get B >new-mtime && + test $(cat old-mtime) -lt $(cat new-mtime) ' test_expect_success 'setup for rename + d/f conflicts' ' @@ -288,14 +300,15 @@ test_expect_success 'setup for rename + d/f conflicts' ' git commit -m "Conflicting change" ' -printf "1\n2\n3\n4\n5555\n6\n7\n8\n9\n10\n11\n" >expected - test_expect_success 'Rename+D/F conflict; renamed file merges + dir not in way' ' git reset --hard && git checkout -q renamed-file-has-no-conflicts^0 && + git merge --strategy=recursive dir-not-in-way && + git diff --quiet && - test -f dir && + test_path_is_file dir && + test_write_lines 1 2 3 4 5555 6 7 8 9 10 11 >expected && test_cmp expected dir ' @@ -315,8 +328,8 @@ test_expect_success 'Rename+D/F conflict; renamed file merges but dir in way' ' test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir/file-in-the-way && - test -f dir~HEAD && + test_path_is_file dir/file-in-the-way && + test_path_is_file dir~HEAD && test_cmp expected dir~HEAD ' @@ -337,29 +350,11 @@ test_expect_success 'Same as previous, but merged other way' ' test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir/file-in-the-way && - test -f dir~renamed-file-has-no-conflicts && + test_path_is_file dir/file-in-the-way && + test_path_is_file dir~renamed-file-has-no-conflicts && test_cmp expected dir~renamed-file-has-no-conflicts ' -cat >expected <<\EOF && -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -<<<<<<< HEAD:dir -12 -======= -11 ->>>>>>> dir-not-in-way:sub/file -EOF - test_expect_success 'Rename+D/F conflict; renamed file cannot merge, dir not in way' ' git reset --hard && rm -rf dir~* && @@ -372,7 +367,24 @@ test_expect_success 'Rename+D/F conflict; renamed file cannot merge, dir not in test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir && + test_path_is_file dir && + cat >expected <<-\EOF && + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + <<<<<<< HEAD:dir + 12 + ======= + 11 + >>>>>>> dir-not-in-way:sub/file + EOF test_cmp expected dir ' @@ -391,29 +403,11 @@ test_expect_success 'Rename+D/F conflict; renamed file cannot merge and dir in t test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir/file-in-the-way && - test -f dir~HEAD && + test_path_is_file dir/file-in-the-way && + test_path_is_file dir~HEAD && test_cmp expected dir~HEAD ' -cat >expected <<\EOF && -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -<<<<<<< HEAD:sub/file -11 -======= -12 ->>>>>>> renamed-file-has-conflicts:dir -EOF - test_expect_success 'Same as previous, but merged other way' ' git reset --hard && rm -rf dir~* && @@ -427,8 +421,25 @@ test_expect_success 'Same as previous, but merged other way' ' test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir/file-in-the-way && - test -f dir~renamed-file-has-conflicts && + test_path_is_file dir/file-in-the-way && + test_path_is_file dir~renamed-file-has-conflicts && + cat >expected <<-\EOF && + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + <<<<<<< HEAD:sub/file + 11 + ======= + 12 + >>>>>>> renamed-file-has-conflicts:dir + EOF test_cmp expected dir~renamed-file-has-conflicts ' @@ -464,9 +475,9 @@ test_expect_success 'both rename source and destination involved in D/F conflict test_must_fail git diff --quiet && - test -f destdir/foo && - test -f one && - test -f destdir~HEAD && + test_path_is_file destdir/foo && + test_path_is_file one && + test_path_is_file destdir~HEAD && test "stuff" = "$(cat destdir~HEAD)" ' @@ -507,9 +518,9 @@ test_expect_success 'pair rename to parent of other (D/F conflicts) w/ untracked test 4 -eq $(find . | grep -v .git | wc -l) && - test -d one && - test -f one~rename-two && - test -f two && + test_path_is_dir one && + test_path_is_file one~rename-two && + test_path_is_file two && test "other" = $(cat one~rename-two) && test "stuff" = $(cat two) ' @@ -527,8 +538,8 @@ test_expect_success 'pair rename to parent of other (D/F conflicts) w/ clean sta test 3 -eq $(find . | grep -v .git | wc -l) && - test -f one && - test -f two && + test_path_is_file one && + test_path_is_file two && test "other" = $(cat one) && test "stuff" = $(cat two) ' @@ -568,11 +579,11 @@ test_expect_success 'check handling of differently renamed file with D/F conflic test 1 -eq "$(git ls-files -u original | wc -l)" && test 2 -eq "$(git ls-files -o | wc -l)" && - test -f one/file && - test -f two/file && - test -f one~HEAD && - test -f two~second-rename && - ! test -f original + test_path_is_file one/file && + test_path_is_file two/file && + test_path_is_file one~HEAD && + test_path_is_file two~second-rename && + test_path_is_missing original ' test_expect_success 'setup rename one file to two; directories moving out of the way' ' @@ -607,9 +618,9 @@ test_expect_success 'check handling of differently renamed file with D/F conflic test 1 -eq "$(git ls-files -u original | wc -l)" && test 0 -eq "$(git ls-files -o | wc -l)" && - test -f one && - test -f two && - ! test -f original + test_path_is_file one && + test_path_is_file two && + test_path_is_missing original ' test_expect_success 'setup avoid unnecessary update, normal rename' ' @@ -635,7 +646,7 @@ test_expect_success 'setup avoid unnecessary update, normal rename' ' test_expect_success 'avoid unnecessary update, normal rename' ' git checkout -q avoid-unnecessary-update-1^0 && - test-tool chmtime --get =1000000000 rename >expect && + test-tool chmtime --get -3600 rename >expect && git merge merge-branch-1 && test-tool chmtime --get rename >actual && test_cmp expect actual # "rename" should have stayed intact @@ -667,7 +678,7 @@ test_expect_success 'setup to test avoiding unnecessary update, with D/F conflic test_expect_success 'avoid unnecessary update, with D/F conflict' ' git checkout -q avoid-unnecessary-update-2^0 && - test-tool chmtime --get =1000000000 df >expect && + test-tool chmtime --get -3600 df >expect && git merge merge-branch-2 && test-tool chmtime --get df >actual && test_cmp expect actual # "df" should have stayed intact @@ -698,7 +709,7 @@ test_expect_success 'setup avoid unnecessary update, dir->(file,nothing)' ' test_expect_success 'avoid unnecessary update, dir->(file,nothing)' ' git checkout -q master^0 && - test-tool chmtime --get =1000000000 df >expect && + test-tool chmtime --get -3600 df >expect && git merge side && test-tool chmtime --get df >actual && test_cmp expect actual # "df" should have stayed intact @@ -727,7 +738,7 @@ test_expect_success 'setup avoid unnecessary update, modify/delete' ' test_expect_success 'avoid unnecessary update, modify/delete' ' git checkout -q master^0 && - test-tool chmtime --get =1000000000 file >expect && + test-tool chmtime --get -3600 file >expect && test_must_fail git merge side && test-tool chmtime --get file >actual && test_cmp expect actual # "file" should have stayed intact @@ -755,7 +766,7 @@ test_expect_success 'setup avoid unnecessary update, rename/add-dest' ' test_expect_success 'avoid unnecessary update, rename/add-dest' ' git checkout -q master^0 && - test-tool chmtime --get =1000000000 newfile >expect && + test-tool chmtime --get -3600 newfile >expect && git merge side && test-tool chmtime --get newfile >actual && test_cmp expect actual # "file" should have stayed intact @@ -810,48 +821,48 @@ test_expect_success 'setup for use of extended merge markers' ' git commit -mC ' -cat >expected <<\EOF && -1 -2 -3 -4 -5 -6 -7 -8 -<<<<<<< HEAD:renamed_file -9 -======= -8.5 ->>>>>>> master^0:original_file -EOF - test_expect_success 'merge master into rename has correct extended markers' ' git checkout rename^0 && test_must_fail git merge -s recursive master^0 && + + cat >expected <<-\EOF && + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + <<<<<<< HEAD:renamed_file + 9 + ======= + 8.5 + >>>>>>> master^0:original_file + EOF test_cmp expected renamed_file ' -cat >expected <<\EOF && -1 -2 -3 -4 -5 -6 -7 -8 -<<<<<<< HEAD:original_file -8.5 -======= -9 ->>>>>>> rename^0:renamed_file -EOF - test_expect_success 'merge rename into master has correct extended markers' ' git reset --hard && git checkout master^0 && test_must_fail git merge -s recursive rename^0 && + + cat >expected <<-\EOF && + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + <<<<<<< HEAD:original_file + 8.5 + ======= + 9 + >>>>>>> rename^0:renamed_file + EOF test_cmp expected renamed_file ' diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index 51ee887a77..2f421d967a 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -3,56 +3,59 @@ test_description='RCS merge replacement: merge-file' . ./test-lib.sh -cat > orig.txt << EOF -Dominus regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -EOF - -cat > new1.txt << EOF -Dominus regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF - -cat > new2.txt << EOF -Dominus regit me, et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -EOF - -cat > new3.txt << EOF -DOMINUS regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -EOF - -cat > new4.txt << EOF -Dominus regit me, et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -EOF -printf "propter nomen suum." >> new4.txt +test_expect_success 'setup' ' + cat >orig.txt <<-\EOF && + Dominus regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + EOF + + cat >new1.txt <<-\EOF && + Dominus regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + cat >new2.txt <<-\EOF && + Dominus regit me, et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + EOF + + cat >new3.txt <<-\EOF && + DOMINUS regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + EOF + + cat >new4.txt <<-\EOF && + Dominus regit me, et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + EOF + + printf "propter nomen suum." >>new4.txt +' test_expect_success 'merge with no changes' ' cp orig.txt test.txt && @@ -60,9 +63,10 @@ test_expect_success 'merge with no changes' ' test_cmp test.txt orig.txt ' -cp new1.txt test.txt -test_expect_success "merge without conflict" \ - "git merge-file test.txt orig.txt new2.txt" +test_expect_success "merge without conflict" ' + cp new1.txt test.txt && + git merge-file test.txt orig.txt new2.txt +' test_expect_success 'works in subdirectory' ' mkdir dir && @@ -73,151 +77,176 @@ test_expect_success 'works in subdirectory' ' test_path_is_missing a.txt ' -cp new1.txt test.txt -test_expect_success "merge without conflict (--quiet)" \ - "git merge-file --quiet test.txt orig.txt new2.txt" - -cp new1.txt test2.txt -test_expect_failure "merge without conflict (missing LF at EOF)" \ - "git merge-file test2.txt orig.txt new4.txt" - -test_expect_failure "merge result added missing LF" \ - "test_cmp test.txt test2.txt" - -cp new4.txt test3.txt -test_expect_success "merge without conflict (missing LF at EOF, away from change in the other file)" \ - "git merge-file --quiet test3.txt new2.txt new3.txt" - -cat > expect.txt << EOF -DOMINUS regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -EOF -printf "propter nomen suum." >> expect.txt - -test_expect_success "merge does not add LF away of change" \ - "test_cmp expect.txt test3.txt" - -cp test.txt backup.txt -test_expect_success "merge with conflicts" \ - "test_must_fail git merge-file test.txt orig.txt new3.txt" - -cat > expect.txt << EOF -<<<<<<< test.txt -Dominus regit me, et nihil mihi deerit. -======= -DOMINUS regit me, -et nihil mihi deerit. ->>>>>>> new3.txt -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF - -test_expect_success "expected conflict markers" "test_cmp expect.txt test.txt" - -cp backup.txt test.txt - -cat > expect.txt << EOF -Dominus regit me, et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF -test_expect_success "merge conflicting with --ours" \ - "git merge-file --ours test.txt orig.txt new3.txt && test_cmp expect.txt test.txt" -cp backup.txt test.txt - -cat > expect.txt << EOF -DOMINUS regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF -test_expect_success "merge conflicting with --theirs" \ - "git merge-file --theirs test.txt orig.txt new3.txt && test_cmp expect.txt test.txt" -cp backup.txt test.txt - -cat > expect.txt << EOF -Dominus regit me, et nihil mihi deerit. -DOMINUS regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF -test_expect_success "merge conflicting with --union" \ - "git merge-file --union test.txt orig.txt new3.txt && test_cmp expect.txt test.txt" -cp backup.txt test.txt - -test_expect_success "merge with conflicts, using -L" \ - "test_must_fail git merge-file -L 1 -L 2 test.txt orig.txt new3.txt" - -cat > expect.txt << EOF -<<<<<<< 1 -Dominus regit me, et nihil mihi deerit. -======= -DOMINUS regit me, -et nihil mihi deerit. ->>>>>>> new3.txt -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF - -test_expect_success "expected conflict markers, with -L" \ - "test_cmp expect.txt test.txt" - -sed "s/ tu / TU /" < new1.txt > new5.txt -test_expect_success "conflict in removed tail" \ - "test_must_fail git merge-file -p orig.txt new1.txt new5.txt > out" - -cat > expect << EOF -Dominus regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -<<<<<<< orig.txt -======= -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam TU mecum es: -virga tua et baculus tuus ipsa me consolata sunt. ->>>>>>> new5.txt -EOF - -test_expect_success "expected conflict markers" "test_cmp expect out" +test_expect_success "merge without conflict (--quiet)" ' + cp new1.txt test.txt && + git merge-file --quiet test.txt orig.txt new2.txt +' + +test_expect_failure "merge without conflict (missing LF at EOF)" ' + cp new1.txt test2.txt && + git merge-file test2.txt orig.txt new4.txt +' + +test_expect_failure "merge result added missing LF" ' + test_cmp test.txt test2.txt +' + +test_expect_success "merge without conflict (missing LF at EOF, away from change in the other file)" ' + cp new4.txt test3.txt && + git merge-file --quiet test3.txt new2.txt new3.txt +' + +test_expect_success "merge does not add LF away of change" ' + cat >expect.txt <<-\EOF && + DOMINUS regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + EOF + printf "propter nomen suum." >>expect.txt && + + test_cmp expect.txt test3.txt +' + +test_expect_success "merge with conflicts" ' + cp test.txt backup.txt && + test_must_fail git merge-file test.txt orig.txt new3.txt +' + +test_expect_success "expected conflict markers" ' + cat >expect.txt <<-\EOF && + <<<<<<< test.txt + Dominus regit me, et nihil mihi deerit. + ======= + DOMINUS regit me, + et nihil mihi deerit. + >>>>>>> new3.txt + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + test_cmp expect.txt test.txt +' + +test_expect_success "merge conflicting with --ours" ' + cp backup.txt test.txt && + + cat >expect.txt <<-\EOF && + Dominus regit me, et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + git merge-file --ours test.txt orig.txt new3.txt && + test_cmp expect.txt test.txt +' + +test_expect_success "merge conflicting with --theirs" ' + cp backup.txt test.txt && + + cat >expect.txt <<-\EOF && + DOMINUS regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + git merge-file --theirs test.txt orig.txt new3.txt && + test_cmp expect.txt test.txt +' + +test_expect_success "merge conflicting with --union" ' + cp backup.txt test.txt && + + cat >expect.txt <<-\EOF && + Dominus regit me, et nihil mihi deerit. + DOMINUS regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + git merge-file --union test.txt orig.txt new3.txt && + test_cmp expect.txt test.txt +' + +test_expect_success "merge with conflicts, using -L" ' + cp backup.txt test.txt && + + test_must_fail git merge-file -L 1 -L 2 test.txt orig.txt new3.txt +' + +test_expect_success "expected conflict markers, with -L" ' + cat >expect.txt <<-\EOF && + <<<<<<< 1 + Dominus regit me, et nihil mihi deerit. + ======= + DOMINUS regit me, + et nihil mihi deerit. + >>>>>>> new3.txt + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + test_cmp expect.txt test.txt +' + +test_expect_success "conflict in removed tail" ' + sed "s/ tu / TU /" <new1.txt >new5.txt && + test_must_fail git merge-file -p orig.txt new1.txt new5.txt >out +' + +test_expect_success "expected conflict markers" ' + cat >expect <<-\EOF && + Dominus regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + <<<<<<< orig.txt + ======= + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam TU mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + >>>>>>> new5.txt + EOF + + test_cmp expect out +' test_expect_success 'binary files cannot be merged' ' test_must_fail git merge-file -p \ @@ -225,59 +254,55 @@ test_expect_success 'binary files cannot be merged' ' grep "Cannot merge binary files" merge.err ' -sed -e "s/deerit.\$/deerit;/" -e "s/me;\$/me./" < new5.txt > new6.txt -sed -e "s/deerit.\$/deerit,/" -e "s/me;\$/me,/" < new5.txt > new7.txt - test_expect_success 'MERGE_ZEALOUS simplifies non-conflicts' ' + sed -e "s/deerit.\$/deerit;/" -e "s/me;\$/me./" <new5.txt >new6.txt && + sed -e "s/deerit.\$/deerit,/" -e "s/me;\$/me,/" <new5.txt >new7.txt && test_must_fail git merge-file -p new6.txt new5.txt new7.txt > output && - test 1 = $(grep ======= < output | wc -l) - + test 1 = $(grep ======= <output | wc -l) ' -sed -e 's/deerit./&%%%%/' -e "s/locavit,/locavit;/"< new6.txt | tr '%' '\012' > new8.txt -sed -e 's/deerit./&%%%%/' -e "s/locavit,/locavit --/" < new7.txt | tr '%' '\012' > new9.txt - test_expect_success 'ZEALOUS_ALNUM' ' + sed -e "s/deerit./&%%%%/" -e "s/locavit,/locavit;/" <new6.txt | tr % "\012" >new8.txt && + sed -e "s/deerit./&%%%%/" -e "s/locavit,/locavit --/" <new7.txt | tr % "\012" >new9.txt && test_must_fail git merge-file -p \ - new8.txt new5.txt new9.txt > merge.out && - test 1 = $(grep ======= < merge.out | wc -l) - + new8.txt new5.txt new9.txt >merge.out && + test 1 = $(grep ======= <merge.out | wc -l) ' -cat >expect <<\EOF -Dominus regit me, -<<<<<<< new8.txt -et nihil mihi deerit; +test_expect_success '"diff3 -m" style output (1)' ' + cat >expect <<-\EOF && + Dominus regit me, + <<<<<<< new8.txt + et nihil mihi deerit; -In loco pascuae ibi me collocavit; -super aquam refectionis educavit me. -||||||| new5.txt -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -======= -et nihil mihi deerit, + In loco pascuae ibi me collocavit; + super aquam refectionis educavit me. + ||||||| new5.txt + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + ======= + et nihil mihi deerit, -In loco pascuae ibi me collocavit -- -super aquam refectionis educavit me, ->>>>>>> new9.txt -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam TU mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF + In loco pascuae ibi me collocavit -- + super aquam refectionis educavit me, + >>>>>>> new9.txt + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam TU mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF -test_expect_success '"diff3 -m" style output (1)' ' test_must_fail git merge-file -p --diff3 \ new8.txt new5.txt new9.txt >actual && test_cmp expect actual @@ -290,61 +315,64 @@ test_expect_success '"diff3 -m" style output (2)' ' test_cmp expect actual ' -cat >expect <<\EOF -Dominus regit me, -<<<<<<<<<< new8.txt -et nihil mihi deerit; +test_expect_success 'marker size' ' + cat >expect <<-\EOF && + Dominus regit me, + <<<<<<<<<< new8.txt + et nihil mihi deerit; -In loco pascuae ibi me collocavit; -super aquam refectionis educavit me. -|||||||||| new5.txt -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -========== -et nihil mihi deerit, + In loco pascuae ibi me collocavit; + super aquam refectionis educavit me. + |||||||||| new5.txt + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + ========== + et nihil mihi deerit, -In loco pascuae ibi me collocavit -- -super aquam refectionis educavit me, ->>>>>>>>>> new9.txt -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam TU mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF + In loco pascuae ibi me collocavit -- + super aquam refectionis educavit me, + >>>>>>>>>> new9.txt + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam TU mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF -test_expect_success 'marker size' ' test_must_fail git merge-file -p --marker-size=10 \ new8.txt new5.txt new9.txt >actual && test_cmp expect actual ' -printf "line1\nline2\nline3" >nolf-orig.txt -printf "line1\nline2\nline3x" >nolf-diff1.txt -printf "line1\nline2\nline3y" >nolf-diff2.txt +test_expect_success 'conflict at EOF without LF resolved by --ours' ' + printf "line1\nline2\nline3" >nolf-orig.txt && + printf "line1\nline2\nline3x" >nolf-diff1.txt && + printf "line1\nline2\nline3y" >nolf-diff2.txt && -test_expect_success 'conflict at EOF without LF resolved by --ours' \ - 'git merge-file -p --ours nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && - printf "line1\nline2\nline3x" >expect.txt && - test_cmp expect.txt output.txt' + git merge-file -p --ours nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3x" >expect.txt && + test_cmp expect.txt output.txt +' -test_expect_success 'conflict at EOF without LF resolved by --theirs' \ - 'git merge-file -p --theirs nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && - printf "line1\nline2\nline3y" >expect.txt && - test_cmp expect.txt output.txt' +test_expect_success 'conflict at EOF without LF resolved by --theirs' ' + git merge-file -p --theirs nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3y" >expect.txt && + test_cmp expect.txt output.txt +' -test_expect_success 'conflict at EOF without LF resolved by --union' \ - 'git merge-file -p --union nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && - printf "line1\nline2\nline3x\nline3y" >expect.txt && - test_cmp expect.txt output.txt' +test_expect_success 'conflict at EOF without LF resolved by --union' ' + git merge-file -p --union nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3x\nline3y" >expect.txt && + test_cmp expect.txt output.txt +' test_expect_success 'conflict sections match existing line endings' ' printf "1\\r\\n2\\r\\n3" >crlf-orig.txt && diff --git a/t/t6024-recursive-merge.sh b/t/t6024-recursive-merge.sh index 27c7de90ce..332cfc53fd 100755 --- a/t/t6024-recursive-merge.sh +++ b/t/t6024-recursive-merge.sh @@ -14,85 +14,95 @@ test_description='Test merge without common ancestors' GIT_COMMITTER_DATE="2006-12-12 23:28:00 +0100" export GIT_COMMITTER_DATE -test_expect_success "setup tests" ' -echo 1 > a1 && -git add a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:00" git commit -m 1 a1 && - -git checkout -b A master && -echo A > a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:01" git commit -m A a1 && - -git checkout -b B master && -echo B > a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:02" git commit -m B a1 && - -git checkout -b D A && -git rev-parse B > .git/MERGE_HEAD && -echo D > a1 && -git update-index a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:03" git commit -m D && - -git symbolic-ref HEAD refs/heads/other && -echo 2 > a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:04" git commit -m 2 a1 && - -git checkout -b C && -echo C > a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:05" git commit -m C a1 && - -git checkout -b E C && -git rev-parse B > .git/MERGE_HEAD && -echo E > a1 && -git update-index a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:06" git commit -m E && - -git checkout -b G E && -git rev-parse A > .git/MERGE_HEAD && -echo G > a1 && -git update-index a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:07" git commit -m G && - -git checkout -b F D && -git rev-parse C > .git/MERGE_HEAD && -echo F > a1 && -git update-index a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:08" git commit -m F +test_expect_success 'setup tests' ' + echo 1 >a1 && + git add a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:00" git commit -m 1 a1 && + + git checkout -b A master && + echo A >a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:01" git commit -m A a1 && + + git checkout -b B master && + echo B >a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:02" git commit -m B a1 && + + git checkout -b D A && + git rev-parse B >.git/MERGE_HEAD && + echo D >a1 && + git update-index a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:03" git commit -m D && + + git symbolic-ref HEAD refs/heads/other && + echo 2 >a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:04" git commit -m 2 a1 && + + git checkout -b C && + echo C >a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:05" git commit -m C a1 && + + git checkout -b E C && + git rev-parse B >.git/MERGE_HEAD && + echo E >a1 && + git update-index a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:06" git commit -m E && + + git checkout -b G E && + git rev-parse A >.git/MERGE_HEAD && + echo G >a1 && + git update-index a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:07" git commit -m G && + + git checkout -b F D && + git rev-parse C >.git/MERGE_HEAD && + echo F >a1 && + git update-index a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:08" git commit -m F && + + test_oid_cache <<-EOF + idxstage1 sha1:ec3fe2a791706733f2d8fa7ad45d9a9672031f5e + idxstage1 sha256:b3c8488929903aaebdeb22270cb6d36e5b8724b01ae0d4da24632f158c99676f + EOF ' test_expect_success 'combined merge conflicts' ' test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git merge -m final G ' -cat > expect << EOF -<<<<<<< HEAD -F -======= -G ->>>>>>> G -EOF +test_expect_success 'result contains a conflict' ' + cat >expect <<-\EOF && + <<<<<<< HEAD + F + ======= + G + >>>>>>> G + EOF -test_expect_success "result contains a conflict" "test_cmp expect a1" + test_cmp expect a1 +' + +test_expect_success 'virtual trees were processed' ' + git ls-files --stage >out && -git ls-files --stage > out -cat > expect << EOF -100644 ec3fe2a791706733f2d8fa7ad45d9a9672031f5e 1 a1 -100644 cf84443e49e1b366fac938711ddf4be2d4d1d9e9 2 a1 -100644 fd7923529855d0b274795ae3349c5e0438333979 3 a1 -EOF + cat >expect <<-EOF && + 100644 $(test_oid idxstage1) 1 a1 + 100644 $(git rev-parse F:a1) 2 a1 + 100644 $(git rev-parse G:a1) 3 a1 + EOF -test_expect_success "virtual trees were processed" "test_cmp expect out" + test_cmp expect out +' test_expect_success 'refuse to merge binary files' ' git reset --hard && - printf "\0" > binary-file && + printf "\0" >binary-file && git add binary-file && git commit -m binary && git checkout G && - printf "\0\0" > binary-file && + printf "\0\0" >binary-file && git add binary-file && git commit -m binary2 && - test_must_fail git merge F > merge.out 2> merge.err && + test_must_fail git merge F >merge.out 2>merge.err && grep "Cannot merge binary files: binary-file (HEAD vs. F)" merge.err ' @@ -116,7 +126,6 @@ test_expect_success 'mark rename/delete as unmerged' ' test 1 = $(git ls-files --unmerged | wc -l) && test_must_fail git rev-parse --verify :2:a2 && git rev-parse --verify :3:a2 - ' test_done diff --git a/t/t6025-merge-symlinks.sh b/t/t6025-merge-symlinks.sh index 433c4de08f..6c0a90d044 100755 --- a/t/t6025-merge-symlinks.sh +++ b/t/t6025-merge-symlinks.sh @@ -10,52 +10,53 @@ if core.symlinks is false.' . ./test-lib.sh -test_expect_success \ -'setup' ' -git config core.symlinks false && -> file && -git add file && -git commit -m initial && -git branch b-symlink && -git branch b-file && -l=$(printf file | git hash-object -t blob -w --stdin) && -echo "120000 $l symlink" | git update-index --index-info && -git commit -m master && -git checkout b-symlink && -l=$(printf file-different | git hash-object -t blob -w --stdin) && -echo "120000 $l symlink" | git update-index --index-info && -git commit -m b-symlink && -git checkout b-file && -echo plain-file > symlink && -git add symlink && -git commit -m b-file' - -test_expect_success \ -'merge master into b-symlink, which has a different symbolic link' ' -git checkout b-symlink && -test_must_fail git merge master' - -test_expect_success \ -'the merge result must be a file' ' -test -f symlink' - -test_expect_success \ -'merge master into b-file, which has a file instead of a symbolic link' ' -git reset --hard && git checkout b-file && -test_must_fail git merge master' - -test_expect_success \ -'the merge result must be a file' ' -test -f symlink' - -test_expect_success \ -'merge b-file, which has a file instead of a symbolic link, into master' ' -git reset --hard && -git checkout master && -test_must_fail git merge b-file' - -test_expect_success \ -'the merge result must be a file' ' -test -f symlink' +test_expect_success 'setup' ' + git config core.symlinks false && + >file && + git add file && + git commit -m initial && + git branch b-symlink && + git branch b-file && + l=$(printf file | git hash-object -t blob -w --stdin) && + echo "120000 $l symlink" | git update-index --index-info && + git commit -m master && + git checkout b-symlink && + l=$(printf file-different | git hash-object -t blob -w --stdin) && + echo "120000 $l symlink" | git update-index --index-info && + git commit -m b-symlink && + git checkout b-file && + echo plain-file >symlink && + git add symlink && + git commit -m b-file +' + +test_expect_success 'merge master into b-symlink, which has a different symbolic link' ' + git checkout b-symlink && + test_must_fail git merge master +' + +test_expect_success 'the merge result must be a file' ' + test_path_is_file symlink +' + +test_expect_success 'merge master into b-file, which has a file instead of a symbolic link' ' + git reset --hard && + git checkout b-file && + test_must_fail git merge master +' + +test_expect_success 'the merge result must be a file' ' + test_path_is_file symlink +' + +test_expect_success 'merge b-file, which has a file instead of a symbolic link, into master' ' + git reset --hard && + git checkout master && + test_must_fail git merge b-file +' + +test_expect_success 'the merge result must be a file' ' + test_path_is_file symlink +' test_done diff --git a/t/t6026-merge-attr.sh b/t/t6026-merge-attr.sh index 8f9b48a493..5900358ce9 100755 --- a/t/t6026-merge-attr.sh +++ b/t/t6026-merge-attr.sh @@ -32,7 +32,29 @@ test_expect_success setup ' test_tick && git commit -m Side && - git tag anchor + git tag anchor && + + cat >./custom-merge <<-\EOF && + #!/bin/sh + + orig="$1" ours="$2" theirs="$3" exit="$4" path=$5 + ( + echo "orig is $orig" + echo "ours is $ours" + echo "theirs is $theirs" + echo "path is $path" + echo "=== orig ===" + cat "$orig" + echo "=== ours ===" + cat "$ours" + echo "=== theirs ===" + cat "$theirs" + ) >"$ours+" + cat "$ours+" >"$ours" + rm -f "$ours+" + exit "$exit" + EOF + chmod +x ./custom-merge ' test_expect_success merge ' @@ -82,28 +104,6 @@ test_expect_success 'retry the merge with longer context' ' grep "<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<" actual ' -cat >./custom-merge <<\EOF -#!/bin/sh - -orig="$1" ours="$2" theirs="$3" exit="$4" path=$5 -( - echo "orig is $orig" - echo "ours is $ours" - echo "theirs is $theirs" - echo "path is $path" - echo "=== orig ===" - cat "$orig" - echo "=== ours ===" - cat "$ours" - echo "=== theirs ===" - cat "$theirs" -) >"$ours+" -cat "$ours+" >"$ours" -rm -f "$ours+" -exit "$exit" -EOF -chmod +x ./custom-merge - test_expect_success 'custom merge backend' ' echo "* merge=union" >.gitattributes && diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index bdc42e9440..ac31faefa1 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -148,7 +148,7 @@ test_expect_success 'bisect start: no ".git/BISECT_START" created if junk rev' ' test_must_fail git bisect start $HASH4 foo -- && git branch > branch.output && grep "* other" branch.output > /dev/null && - test_must_fail test -e .git/BISECT_START + test_path_is_missing .git/BISECT_START ' test_expect_success 'bisect start: existing ".git/BISECT_START" not modified if junk rev' ' @@ -166,7 +166,7 @@ test_expect_success 'bisect start: no ".git/BISECT_START" if mistaken rev' ' test_must_fail git bisect start $HASH1 $HASH4 -- && git branch > branch.output && grep "* other" branch.output > /dev/null && - test_must_fail test -e .git/BISECT_START + test_path_is_missing .git/BISECT_START ' test_expect_success 'bisect start: no ".git/BISECT_START" if checkout error' ' @@ -175,7 +175,7 @@ test_expect_success 'bisect start: no ".git/BISECT_START" if checkout error' ' git branch && git branch > branch.output && grep "* other" branch.output > /dev/null && - test_must_fail test -e .git/BISECT_START && + test_path_is_missing .git/BISECT_START && test -z "$(git for-each-ref "refs/bisect/*")" && git checkout HEAD hello ' @@ -482,10 +482,10 @@ test_expect_success 'optimized merge base checks' ' git bisect good > my_bisect_log2.txt && test -f ".git/BISECT_ANCESTORS_OK" && test "$HASH6" = $(git rev-parse --verify HEAD) && - git bisect bad > my_bisect_log3.txt && + git bisect bad && git bisect good "$A_HASH" > my_bisect_log4.txt && test_i18ngrep "merge base must be tested" my_bisect_log4.txt && - test_must_fail test -f ".git/BISECT_ANCESTORS_OK" + test_path_is_missing ".git/BISECT_ANCESTORS_OK" ' # This creates another side branch called "parallel" with some files @@ -792,6 +792,13 @@ test_expect_success 'bisect replay with old and new' ' git bisect reset ' +test_expect_success 'bisect replay with CRLF log' ' + append_cr <log_to_replay.txt >log_to_replay_crlf.txt && + git bisect replay log_to_replay_crlf.txt >bisect_result_crlf && + grep "$HASH2 is the first new commit" bisect_result_crlf && + git bisect reset +' + test_expect_success 'bisect cannot mix old/new and good/bad' ' git bisect start && git bisect bad $HASH4 && diff --git a/t/t6034-merge-rename-nocruft.sh b/t/t6034-merge-rename-nocruft.sh index 89871aa5b0..a25e730460 100755 --- a/t/t6034-merge-rename-nocruft.sh +++ b/t/t6034-merge-rename-nocruft.sh @@ -3,74 +3,73 @@ test_description='Merge-recursive merging renames' . ./test-lib.sh -test_expect_success setup \ -' -cat >A <<\EOF && -a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa -b bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb -c cccccccccccccccccccccccccccccccccccccccccccccccc -d dddddddddddddddddddddddddddddddddddddddddddddddd -e eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee -f ffffffffffffffffffffffffffffffffffffffffffffffff -g gggggggggggggggggggggggggggggggggggggggggggggggg -h hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh -i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii -j jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj -k kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk -l llllllllllllllllllllllllllllllllllllllllllllllll -m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm -n nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn -o oooooooooooooooooooooooooooooooooooooooooooooooo -EOF +test_expect_success 'setup' ' + cat >A <<-\EOF && + a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa + b bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb + c cccccccccccccccccccccccccccccccccccccccccccccccc + d dddddddddddddddddddddddddddddddddddddddddddddddd + e eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee + f ffffffffffffffffffffffffffffffffffffffffffffffff + g gggggggggggggggggggggggggggggggggggggggggggggggg + h hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh + i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii + j jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj + k kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk + l llllllllllllllllllllllllllllllllllllllllllllllll + m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm + n nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn + o oooooooooooooooooooooooooooooooooooooooooooooooo + EOF -cat >M <<\EOF && -A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA -B BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB -C CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC -D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD -E EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE -F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG -H HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH -I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII -J JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ -K KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK -L LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL -M MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM -N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN -O OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO -EOF + cat >M <<-\EOF && + A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA + B BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB + C CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC + D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD + E EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE + F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF + G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG + H HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH + I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII + J JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ + K KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK + L LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL + M MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM + N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN + O OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO + EOF -git add A M && -git commit -m "initial has A and M" && -git branch white && -git branch red && -git branch blue && + git add A M && + git commit -m "initial has A and M" && + git branch white && + git branch red && + git branch blue && -git checkout white && -sed -e "/^g /s/.*/g : white changes a line/" <A >B && -sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && -rm -f A M && -git update-index --add --remove A B M N && -git commit -m "white renames A->B, M->N" && + git checkout white && + sed -e "/^g /s/.*/g : white changes a line/" <A >B && + sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && + rm -f A M && + git update-index --add --remove A B M N && + git commit -m "white renames A->B, M->N" && -git checkout red && -echo created by red >R && -git update-index --add R && -git commit -m "red creates R" && + git checkout red && + echo created by red >R && + git update-index --add R && + git commit -m "red creates R" && -git checkout blue && -sed -e "/^o /s/.*/g : blue changes a line/" <A >B && -rm -f A && -mv B A && -git update-index A && -git commit -m "blue modify A" && + git checkout blue && + sed -e "/^o /s/.*/g : blue changes a line/" <A >B && + rm -f A && + mv B A && + git update-index A && + git commit -m "blue modify A" && -git checkout master' + git checkout master +' # This test broke in 65ac6e9c3f47807cb603af07a6a9e1a43bc119ae -test_expect_success 'merge white into red (A->B,M->N)' \ -' +test_expect_success 'merge white into red (A->B,M->N)' ' git checkout -b red-white red && git merge white && git write-tree && @@ -82,8 +81,7 @@ test_expect_success 'merge white into red (A->B,M->N)' \ ' # This test broke in 8371234ecaaf6e14fe3f2082a855eff1bbd79ae9 -test_expect_success 'merge blue into white (A->B, mod A, A untracked)' \ -' +test_expect_success 'merge blue into white (A->B, mod A, A untracked)' ' git checkout -b white-blue white && echo dirty >A && git merge blue && diff --git a/t/t6035-merge-dir-to-symlink.sh b/t/t6035-merge-dir-to-symlink.sh index 9324ea4416..2eddcc7664 100755 --- a/t/t6035-merge-dir-to-symlink.sh +++ b/t/t6035-merge-dir-to-symlink.sh @@ -31,19 +31,19 @@ test_expect_success 'a/b-2/c/d is kept when clobbering symlink b' ' git rm --cached a/b && git commit -m "untracked symlink remains" && git checkout -f start^0 && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success 'checkout should not have deleted a/b-2/c/d' ' git checkout HEAD^0 && git reset --hard master && git checkout start^0 && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success 'setup for merge test' ' git reset --hard && - test -f a/b-2/c/d && + test_path_is_file a/b-2/c/d && echo x > a/x && git add a/x && git commit -m x && @@ -54,7 +54,7 @@ test_expect_success 'Handle D/F conflict, do not lose a/b-2/c/d in merge (resolv git reset --hard && git checkout baseline^0 && git merge -s resolve master && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success SYMLINKS 'a/b was resolved as symlink' ' @@ -65,7 +65,7 @@ test_expect_success 'Handle D/F conflict, do not lose a/b-2/c/d in merge (recurs git reset --hard && git checkout baseline^0 && git merge -s recursive master && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success SYMLINKS 'a/b was resolved as symlink' ' @@ -76,7 +76,7 @@ test_expect_success 'Handle F/D conflict, do not lose a/b-2/c/d in merge (resolv git reset --hard && git checkout master^0 && git merge -s resolve baseline^0 && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success SYMLINKS 'a/b was resolved as symlink' ' @@ -87,7 +87,7 @@ test_expect_success 'Handle F/D conflict, do not lose a/b-2/c/d in merge (recurs git reset --hard && git checkout master^0 && git merge -s recursive baseline^0 && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success SYMLINKS 'a/b was resolved as symlink' ' @@ -99,8 +99,8 @@ test_expect_failure 'do not lose untracked in merge (resolve)' ' git checkout baseline^0 && >a/b/c/e && test_must_fail git merge -s resolve master && - test -f a/b/c/e && - test -f a/b-2/c/d + test_path_is_file a/b/c/e && + test_path_is_file a/b-2/c/d ' test_expect_success 'do not lose untracked in merge (recursive)' ' @@ -108,8 +108,8 @@ test_expect_success 'do not lose untracked in merge (recursive)' ' git checkout baseline^0 && >a/b/c/e && test_must_fail git merge -s recursive master && - test -f a/b/c/e && - test -f a/b-2/c/d + test_path_is_file a/b/c/e && + test_path_is_file a/b-2/c/d ' test_expect_success 'do not lose modifications in merge (resolve)' ' @@ -140,7 +140,7 @@ test_expect_success 'merge should not have D/F conflicts (resolve)' ' git reset --hard && git checkout baseline^0 && git merge -s resolve test2 && - test -f a/b/c/d + test_path_is_file a/b/c/d ' test_expect_success SYMLINKS 'a/b-2 was resolved as symlink' ' @@ -151,7 +151,7 @@ test_expect_success 'merge should not have D/F conflicts (recursive)' ' git reset --hard && git checkout baseline^0 && git merge -s recursive test2 && - test -f a/b/c/d + test_path_is_file a/b/c/d ' test_expect_success SYMLINKS 'a/b-2 was resolved as symlink' ' @@ -162,7 +162,7 @@ test_expect_success 'merge should not have F/D conflicts (recursive)' ' git reset --hard && git checkout -b foo test2 && git merge -s recursive baseline^0 && - test -f a/b/c/d + test_path_is_file a/b/c/d ' test_expect_success SYMLINKS 'a/b-2 was resolved as symlink' ' diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index 7fddcc8c73..b3bf462617 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -60,9 +60,9 @@ test_expect_success 'merge simple rename+criss-cross with no modifications' ' test_must_fail git merge -s recursive R2^0 && git ls-files -s >out && - test_line_count = 2 out && + test_line_count = 5 out && git ls-files -u >out && - test_line_count = 2 out && + test_line_count = 3 out && git ls-files -o >out && test_line_count = 1 out && @@ -133,9 +133,9 @@ test_expect_success 'merge criss-cross + rename merges with basic modification' test_must_fail git merge -s recursive R2^0 && git ls-files -s >out && - test_line_count = 2 out && + test_line_count = 5 out && git ls-files -u >out && - test_line_count = 2 out && + test_line_count = 3 out && git ls-files -o >out && test_line_count = 1 out && @@ -218,8 +218,18 @@ test_expect_success 'git detects differently handled merges conflict' ' git ls-files -o >out && test_line_count = 1 out && - git rev-parse >expect \ - C:new_a D:new_a E:new_a && + git cat-file -p C:new_a >ours && + git cat-file -p C:a >theirs && + >empty && + test_must_fail git merge-file \ + -L "Temporary merge branch 1" \ + -L "" \ + -L "Temporary merge branch 2" \ + ours empty theirs && + sed -e "s/^\([<=>]\)/\1\1\1/" ours >ours-tweaked && + git hash-object ours-tweaked >expect && + git rev-parse >>expect \ + D:new_a E:new_a && git rev-parse >actual \ :1:new_a :2:new_a :3:new_a && test_cmp expect actual && @@ -257,7 +267,8 @@ test_expect_success 'git detects differently handled merges conflict, swapped' ' ctime=$(git log --no-walk --date=raw --format=%cd C | awk "{print \$1}") && newctime=$(($btime+1)) && git fast-export --no-data --all | sed -e s/$ctime/$newctime/ | git fast-import --force --quiet && - # End of differences; rest is copy-paste of last test + # End of most differences; rest is copy-paste of last test, + # other than swapping C:a and C:new_a due to order switch git checkout D^0 && test_must_fail git merge -s recursive E^0 && @@ -269,8 +280,18 @@ test_expect_success 'git detects differently handled merges conflict, swapped' ' git ls-files -o >out && test_line_count = 1 out && - git rev-parse >expect \ - C:new_a D:new_a E:new_a && + git cat-file -p C:a >ours && + git cat-file -p C:new_a >theirs && + >empty && + test_must_fail git merge-file \ + -L "Temporary merge branch 1" \ + -L "" \ + -L "Temporary merge branch 2" \ + ours empty theirs && + sed -e "s/^\([<=>]\)/\1\1\1/" ours >ours-tweaked && + git hash-object ours-tweaked >expect && + git rev-parse >>expect \ + D:new_a E:new_a && git rev-parse >actual \ :1:new_a :2:new_a :3:new_a && test_cmp expect actual && @@ -1532,7 +1553,7 @@ test_expect_success 'setup nested conflicts' ' mv -f b_R1 b && mv -f a_R1 a && git add b a && - test_tick && git commit -m "verson R1 of files" && + test_tick && git commit -m "version R1 of files" && git tag R1 && # Create first merge on left side @@ -1696,7 +1717,7 @@ test_expect_success 'setup virtual merge base with nested conflicts' ' git checkout R && echo right >>content && git add content && - test_tick && git commit -m "verson R1 of content" && + test_tick && git commit -m "version R1 of content" && git tag R1 && # Create L2 diff --git a/t/t6042-merge-rename-corner-cases.sh b/t/t6042-merge-rename-corner-cases.sh index c5b57f40c3..f163893ff9 100755 --- a/t/t6042-merge-rename-corner-cases.sh +++ b/t/t6042-merge-rename-corner-cases.sh @@ -5,7 +5,7 @@ test_description="recursive merge corner cases w/ renames but not criss-crosses" . ./test-lib.sh -test_expect_success 'setup rename/delete + untracked file' ' +test_setup_rename_delete_untracked () { test_create_repo rename-delete-untracked && ( cd rename-delete-untracked && @@ -29,9 +29,10 @@ test_expect_success 'setup rename/delete + untracked file' ' git commit -m track-people-instead-of-objects && echo "Myyy PRECIOUSSS" >ring ) -' +} test_expect_success "Does git preserve Gollum's precious artifact?" ' + test_setup_rename_delete_untracked && ( cd rename-delete-untracked && @@ -49,7 +50,7 @@ test_expect_success "Does git preserve Gollum's precious artifact?" ' # # We should be able to merge B & C cleanly -test_expect_success 'setup rename/modify/add-source conflict' ' +test_setup_rename_modify_add_source () { test_create_repo rename-modify-add-source && ( cd rename-modify-add-source && @@ -70,9 +71,10 @@ test_expect_success 'setup rename/modify/add-source conflict' ' git add a && git commit -m C ) -' +} test_expect_failure 'rename/modify/add-source conflict resolvable' ' + test_setup_rename_modify_add_source && ( cd rename-modify-add-source && @@ -88,7 +90,7 @@ test_expect_failure 'rename/modify/add-source conflict resolvable' ' ) ' -test_expect_success 'setup resolvable conflict missed if rename missed' ' +test_setup_break_detection_1 () { test_create_repo break-detection-1 && ( cd break-detection-1 && @@ -110,9 +112,10 @@ test_expect_success 'setup resolvable conflict missed if rename missed' ' git add a && git commit -m C ) -' +} test_expect_failure 'conflict caused if rename not detected' ' + test_setup_break_detection_1 && ( cd break-detection-1 && @@ -135,7 +138,7 @@ test_expect_failure 'conflict caused if rename not detected' ' ) ' -test_expect_success 'setup conflict resolved wrong if rename missed' ' +test_setup_break_detection_2 () { test_create_repo break-detection-2 && ( cd break-detection-2 && @@ -160,9 +163,10 @@ test_expect_success 'setup conflict resolved wrong if rename missed' ' git add a && git commit -m E ) -' +} test_expect_failure 'missed conflict if rename not detected' ' + test_setup_break_detection_2 && ( cd break-detection-2 && @@ -182,7 +186,7 @@ test_expect_failure 'missed conflict if rename not detected' ' # Commit B: rename a->b # Commit C: rename a->b, add unrelated a -test_expect_success 'setup undetected rename/add-source causes data loss' ' +test_setup_break_detection_3 () { test_create_repo break-detection-3 && ( cd break-detection-3 && @@ -202,9 +206,10 @@ test_expect_success 'setup undetected rename/add-source causes data loss' ' git add a && git commit -m C ) -' +} test_expect_failure 'detect rename/add-source and preserve all data' ' + test_setup_break_detection_3 && ( cd break-detection-3 && @@ -231,6 +236,7 @@ test_expect_failure 'detect rename/add-source and preserve all data' ' ' test_expect_failure 'detect rename/add-source and preserve all data, merge other way' ' + test_setup_break_detection_3 && ( cd break-detection-3 && @@ -256,10 +262,10 @@ test_expect_failure 'detect rename/add-source and preserve all data, merge other ) ' -test_expect_success 'setup content merge + rename/directory conflict' ' - test_create_repo rename-directory-1 && +test_setup_rename_directory () { + test_create_repo rename-directory-$1 && ( - cd rename-directory-1 && + cd rename-directory-$1 && printf "1\n2\n3\n4\n5\n6\n" >file && git add file && @@ -290,11 +296,12 @@ test_expect_success 'setup content merge + rename/directory conflict' ' test_tick && git commit -m left ) -' +} test_expect_success 'rename/directory conflict + clean content merge' ' + test_setup_rename_directory 1a && ( - cd rename-directory-1 && + cd rename-directory-1a && git checkout left-clean^0 && @@ -320,8 +327,9 @@ test_expect_success 'rename/directory conflict + clean content merge' ' ' test_expect_success 'rename/directory conflict + content merge conflict' ' + test_setup_rename_directory 1b && ( - cd rename-directory-1 && + cd rename-directory-1b && git reset --hard && git clean -fdqx && @@ -358,7 +366,7 @@ test_expect_success 'rename/directory conflict + content merge conflict' ' ) ' -test_expect_success 'setup content merge + rename/directory conflict w/ disappearing dir' ' +test_setup_rename_directory_2 () { test_create_repo rename-directory-2 && ( cd rename-directory-2 && @@ -385,9 +393,10 @@ test_expect_success 'setup content merge + rename/directory conflict w/ disappea test_tick && git commit -m left ) -' +} test_expect_success 'disappearing dir in rename/directory conflict handled' ' + test_setup_rename_directory_2 && ( cd rename-directory-2 && @@ -416,10 +425,10 @@ test_expect_success 'disappearing dir in rename/directory conflict handled' ' # Commit A: rename a->b, modifying b too # Commit B: modify a, add different b -test_expect_success 'setup rename-with-content-merge vs. add' ' - test_create_repo rename-with-content-merge-and-add && +test_setup_rename_with_content_merge_and_add () { + test_create_repo rename-with-content-merge-and-add-$1 && ( - cd rename-with-content-merge-and-add && + cd rename-with-content-merge-and-add-$1 && test_seq 1 5 >a && git add a && @@ -438,11 +447,12 @@ test_expect_success 'setup rename-with-content-merge vs. add' ' git add a b && git commit -m B ) -' +} test_expect_success 'handle rename-with-content-merge vs. add' ' + test_setup_rename_with_content_merge_and_add AB && ( - cd rename-with-content-merge-and-add && + cd rename-with-content-merge-and-add-AB && git checkout A^0 && @@ -483,8 +493,9 @@ test_expect_success 'handle rename-with-content-merge vs. add' ' ' test_expect_success 'handle rename-with-content-merge vs. add, merge other way' ' + test_setup_rename_with_content_merge_and_add BA && ( - cd rename-with-content-merge-and-add && + cd rename-with-content-merge-and-add-BA && git reset --hard && git clean -fdx && @@ -539,7 +550,7 @@ test_expect_success 'handle rename-with-content-merge vs. add, merge other way' # * The working copy should have two files, both of form c~<unique>; does it? # * Nothing else should be present. Is anything? -test_expect_success 'setup rename/rename (2to1) + modify/modify' ' +test_setup_rename_rename_2to1 () { test_create_repo rename-rename-2to1 && ( cd rename-rename-2to1 && @@ -562,9 +573,10 @@ test_expect_success 'setup rename/rename (2to1) + modify/modify' ' git add a && git commit -m C ) -' +} test_expect_success 'handle rename/rename (2to1) conflict correctly' ' + test_setup_rename_rename_2to1 && ( cd rename-rename-2to1 && @@ -610,7 +622,7 @@ test_expect_success 'handle rename/rename (2to1) conflict correctly' ' # Commit A: new file: a # Commit B: rename a->b # Commit C: rename a->c -test_expect_success 'setup simple rename/rename (1to2) conflict' ' +test_setup_rename_rename_1to2 () { test_create_repo rename-rename-1to2 && ( cd rename-rename-1to2 && @@ -631,9 +643,10 @@ test_expect_success 'setup simple rename/rename (1to2) conflict' ' test_tick && git commit -m C ) -' +} test_expect_success 'merge has correct working tree contents' ' + test_setup_rename_rename_1to2 && ( cd rename-rename-1to2 && @@ -667,7 +680,7 @@ test_expect_success 'merge has correct working tree contents' ' # # Merging of B & C should NOT be clean; there's a rename/rename conflict -test_expect_success 'setup rename/rename(1to2)/add-source conflict' ' +test_setup_rename_rename_1to2_add_source_1 () { test_create_repo rename-rename-1to2-add-source-1 && ( cd rename-rename-1to2-add-source-1 && @@ -687,9 +700,10 @@ test_expect_success 'setup rename/rename(1to2)/add-source conflict' ' git add a && git commit -m C ) -' +} test_expect_failure 'detect conflict with rename/rename(1to2)/add-source merge' ' + test_setup_rename_rename_1to2_add_source_1 && ( cd rename-rename-1to2-add-source-1 && @@ -714,7 +728,7 @@ test_expect_failure 'detect conflict with rename/rename(1to2)/add-source merge' ) ' -test_expect_success 'setup rename/rename(1to2)/add-source resolvable conflict' ' +test_setup_rename_rename_1to2_add_source_2 () { test_create_repo rename-rename-1to2-add-source-2 && ( cd rename-rename-1to2-add-source-2 && @@ -737,9 +751,10 @@ test_expect_success 'setup rename/rename(1to2)/add-source resolvable conflict' ' test_tick && git commit -m two ) -' +} test_expect_failure 'rename/rename/add-source still tracks new a file' ' + test_setup_rename_rename_1to2_add_source_2 && ( cd rename-rename-1to2-add-source-2 && @@ -759,7 +774,7 @@ test_expect_failure 'rename/rename/add-source still tracks new a file' ' ) ' -test_expect_success 'setup rename/rename(1to2)/add-dest conflict' ' +test_setup_rename_rename_1to2_add_dest () { test_create_repo rename-rename-1to2-add-dest && ( cd rename-rename-1to2-add-dest && @@ -784,9 +799,10 @@ test_expect_success 'setup rename/rename(1to2)/add-dest conflict' ' test_tick && git commit -m two ) -' +} test_expect_success 'rename/rename/add-dest merge still knows about conflicting file versions' ' + test_setup_rename_rename_1to2_add_dest && ( cd rename-rename-1to2-add-dest && @@ -838,7 +854,7 @@ test_expect_success 'rename/rename/add-dest merge still knows about conflicting # Commit B: rename foo->bar # Expected: CONFLICT (rename/add/delete), two-way merged bar -test_expect_success 'rad-setup: rename/add/delete conflict' ' +test_setup_rad () { test_create_repo rad && ( cd rad && @@ -860,9 +876,10 @@ test_expect_success 'rad-setup: rename/add/delete conflict' ' git mv foo bar && git commit -m "rename foo to bar" ) -' +} test_expect_failure 'rad-check: rename/add/delete conflict' ' + test_setup_rad && ( cd rad && @@ -904,7 +921,7 @@ test_expect_failure 'rad-check: rename/add/delete conflict' ' # Commit B: rename bar->baz, rm foo # Expected: CONFLICT (rename/rename/delete/delete), two-way merged baz -test_expect_success 'rrdd-setup: rename/rename(2to1)/delete/delete conflict' ' +test_setup_rrdd () { test_create_repo rrdd && ( cd rrdd && @@ -927,9 +944,10 @@ test_expect_success 'rrdd-setup: rename/rename(2to1)/delete/delete conflict' ' git rm foo && git commit -m "Rename bar, remove foo" ) -' +} test_expect_failure 'rrdd-check: rename/rename(2to1)/delete/delete conflict' ' + test_setup_rrdd && ( cd rrdd && @@ -973,7 +991,7 @@ test_expect_failure 'rrdd-check: rename/rename(2to1)/delete/delete conflict' ' # Expected: six CONFLICT(rename/rename) messages, each path in two of the # multi-way merged contents found in two, four, six -test_expect_success 'mod6-setup: chains of rename/rename(1to2) and rename/rename(2to1)' ' +test_setup_mod6 () { test_create_repo mod6 && ( cd mod6 && @@ -1009,9 +1027,10 @@ test_expect_success 'mod6-setup: chains of rename/rename(1to2) and rename/rename test_tick && git commit -m "B" ) -' +} test_expect_failure 'mod6-check: chains of rename/rename(1to2) and rename/rename(2to1)' ' + test_setup_mod6 && ( cd mod6 && @@ -1108,7 +1127,8 @@ test_conflicts_with_adds_and_renames() { # files. Is it present? # 4) There should not be any three~* files in the working # tree - test_expect_success "setup simple $sideL/$sideR conflict" ' + test_setup_collision_conflict () { + #test_expect_success "setup simple $sideL/$sideR conflict" ' test_create_repo simple_${sideL}_${sideR} && ( cd simple_${sideL}_${sideR} && @@ -1185,9 +1205,11 @@ test_conflicts_with_adds_and_renames() { fi && test_tick && git commit -m R ) - ' + #' + } test_expect_success "check simple $sideL/$sideR conflict" ' + test_setup_collision_conflict && ( cd simple_${sideL}_${sideR} && @@ -1254,7 +1276,7 @@ test_conflicts_with_adds_and_renames add add # # So, we have four different conflicting files that all end up at path # 'three'. -test_expect_success 'setup nested conflicts from rename/rename(2to1)' ' +test_setup_nested_conflicts_from_rename_rename () { test_create_repo nested_conflicts_from_rename_rename && ( cd nested_conflicts_from_rename_rename && @@ -1305,9 +1327,10 @@ test_expect_success 'setup nested conflicts from rename/rename(2to1)' ' git add one three && test_tick && git commit -m german ) -' +} test_expect_success 'check nested conflicts from rename/rename(2to1)' ' + test_setup_nested_conflicts_from_rename_rename && ( cd nested_conflicts_from_rename_rename && @@ -1356,4 +1379,59 @@ test_expect_success 'check nested conflicts from rename/rename(2to1)' ' ) ' +# Testcase rename/rename(1to2) of a binary file +# Commit O: orig +# Commit A: orig-A +# Commit B: orig-B +# Expected: CONFLICT(rename/rename) message, three unstaged entries in the +# index, and contents of orig-[AB] at path orig-[AB] +test_setup_rename_rename_1_to_2_binary () { + test_create_repo rename_rename_1_to_2_binary && + ( + cd rename_rename_1_to_2_binary && + + echo '* binary' >.gitattributes && + git add .gitattributes && + + test_seq 1 10 >orig && + git add orig && + git commit -m orig && + + git branch A && + git branch B && + + git checkout A && + git mv orig orig-A && + test_seq 1 11 >orig-A && + git add orig-A && + git commit -m orig-A && + + git checkout B && + git mv orig orig-B && + test_seq 0 10 >orig-B && + git add orig-B && + git commit -m orig-B + + ) +} + +test_expect_success 'rename/rename(1to2) with a binary file' ' + test_setup_rename_rename_1_to_2_binary && + ( + cd rename_rename_1_to_2_binary && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 && + + # Make sure the index has the right number of entries + git ls-files -s >actual && + test_line_count = 4 actual && + + git rev-parse A:orig-A B:orig-B >expect && + git hash-object orig-A orig-B >actual && + test_cmp expect actual + ) +' + test_done diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh index c966147d5d..83792c5ef1 100755 --- a/t/t6043-merge-rename-directories.sh +++ b/t/t6043-merge-rename-directories.sh @@ -38,7 +38,7 @@ test_description="recursive merge with directory renames" # Commit B: z/{b,c,d,e/f} # Expected: y/{b,c,d,e/f} -test_expect_success '1a-setup: Simple directory rename detection' ' +test_setup_1a () { test_create_repo 1a && ( cd 1a && @@ -67,9 +67,10 @@ test_expect_success '1a-setup: Simple directory rename detection' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1a-check: Simple directory rename detection' ' +test_expect_success '1a: Simple directory rename detection' ' + test_setup_1a && ( cd 1a && @@ -103,7 +104,7 @@ test_expect_success '1a-check: Simple directory rename detection' ' # Commit B: y/{b,c,d} # Expected: y/{b,c,d,e} -test_expect_success '1b-setup: Merge a directory with another' ' +test_setup_1b () { test_create_repo 1b && ( cd 1b && @@ -134,9 +135,10 @@ test_expect_success '1b-setup: Merge a directory with another' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1b-check: Merge a directory with another' ' +test_expect_success '1b: Merge a directory with another' ' + test_setup_1b && ( cd 1b && @@ -165,7 +167,7 @@ test_expect_success '1b-check: Merge a directory with another' ' # Commit B: z/{b,c,d} # Expected: y/{b,c,d} (because x/d -> z/d -> y/d) -test_expect_success '1c-setup: Transitive renaming' ' +test_setup_1c () { test_create_repo 1c && ( cd 1c && @@ -193,9 +195,10 @@ test_expect_success '1c-setup: Transitive renaming' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1c-check: Transitive renaming' ' +test_expect_success '1c: Transitive renaming' ' + test_setup_1c && ( cd 1c && @@ -227,7 +230,7 @@ test_expect_success '1c-check: Transitive renaming' ' # Note: y/m & z/n should definitely move into x. By the same token, both # y/wham_1 & z/wham_2 should too...giving us a conflict. -test_expect_success '1d-setup: Directory renames cause a rename/rename(2to1) conflict' ' +test_setup_1d () { test_create_repo 1d && ( cd 1d && @@ -262,9 +265,10 @@ test_expect_success '1d-setup: Directory renames cause a rename/rename(2to1) con test_tick && git commit -m "B" ) -' +} -test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) conflict' ' +test_expect_success '1d: Directory renames cause a rename/rename(2to1) conflict' ' + test_setup_1d && ( cd 1d && @@ -313,7 +317,7 @@ test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) con # Commit B: z/{oldb,oldc,d} # Expected: y/{newb,newc,d} -test_expect_success '1e-setup: Renamed directory, with all files being renamed too' ' +test_setup_1e () { test_create_repo 1e && ( cd 1e && @@ -342,9 +346,10 @@ test_expect_success '1e-setup: Renamed directory, with all files being renamed t test_tick && git commit -m "B" ) -' +} -test_expect_success '1e-check: Renamed directory, with all files being renamed too' ' +test_expect_success '1e: Renamed directory, with all files being renamed too' ' + test_setup_1e && ( cd 1e && @@ -371,7 +376,7 @@ test_expect_success '1e-check: Renamed directory, with all files being renamed t # Commit B: y/{b,c}, x/{d,e,f} # Expected: y/{b,c}, x/{d,e,f,g} -test_expect_success '1f-setup: Split a directory into two other directories' ' +test_setup_1f () { test_create_repo 1f && ( cd 1f && @@ -408,9 +413,10 @@ test_expect_success '1f-setup: Split a directory into two other directories' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1f-check: Split a directory into two other directories' ' +test_expect_success '1f: Split a directory into two other directories' ' + test_setup_1f && ( cd 1f && @@ -459,7 +465,7 @@ test_expect_success '1f-check: Split a directory into two other directories' ' # Commit A: y/b, w/c # Commit B: z/{b,c,d} # Expected: y/b, w/c, z/d, with warning about z/ -> (y/ vs. w/) conflict -test_expect_success '2a-setup: Directory split into two on one side, with equal numbers of paths' ' +test_setup_2a () { test_create_repo 2a && ( cd 2a && @@ -489,9 +495,10 @@ test_expect_success '2a-setup: Directory split into two on one side, with equal test_tick && git commit -m "B" ) -' +} -test_expect_success '2a-check: Directory split into two on one side, with equal numbers of paths' ' +test_expect_success '2a: Directory split into two on one side, with equal numbers of paths' ' + test_setup_2a && ( cd 2a && @@ -520,7 +527,7 @@ test_expect_success '2a-check: Directory split into two on one side, with equal # Commit A: y/b, w/c # Commit B: z/{b,c}, x/d # Expected: y/b, w/c, x/d; No warning about z/ -> (y/ vs. w/) conflict -test_expect_success '2b-setup: Directory split into two on one side, with equal numbers of paths' ' +test_setup_2b () { test_create_repo 2b && ( cd 2b && @@ -551,9 +558,10 @@ test_expect_success '2b-setup: Directory split into two on one side, with equal test_tick && git commit -m "B" ) -' +} -test_expect_success '2b-check: Directory split into two on one side, with equal numbers of paths' ' +test_expect_success '2b: Directory split into two on one side, with equal numbers of paths' ' + test_setup_2b && ( cd 2b && @@ -601,7 +609,7 @@ test_expect_success '2b-check: Directory split into two on one side, with equal # Commit A: z/{b,c,d} (no change) # Commit B: y/{b,c}, x/d # Expected: y/{b,c}, x/d -test_expect_success '3a-setup: Avoid implicit rename if involved as source on other side' ' +test_setup_3a () { test_create_repo 3a && ( cd 3a && @@ -632,9 +640,10 @@ test_expect_success '3a-setup: Avoid implicit rename if involved as source on ot test_tick && git commit -m "B" ) -' +} -test_expect_success '3a-check: Avoid implicit rename if involved as source on other side' ' +test_expect_success '3a: Avoid implicit rename if involved as source on other side' ' + test_setup_3a && ( cd 3a && @@ -664,7 +673,7 @@ test_expect_success '3a-check: Avoid implicit rename if involved as source on ot # get it involved in directory rename detection. If it were, we might # end up with CONFLICT:(z/d -> y/d vs. x/d vs. w/d), i.e. a # rename/rename/rename(1to3) conflict, which is just weird. -test_expect_success '3b-setup: Avoid implicit rename if involved as source on current side' ' +test_setup_3b () { test_create_repo 3b && ( cd 3b && @@ -697,9 +706,10 @@ test_expect_success '3b-setup: Avoid implicit rename if involved as source on cu test_tick && git commit -m "B" ) -' +} -test_expect_success '3b-check: Avoid implicit rename if involved as source on current side' ' +test_expect_success '3b: Avoid implicit rename if involved as source on current side' ' + test_setup_3b && ( cd 3b && @@ -744,7 +754,7 @@ test_expect_success '3b-check: Avoid implicit rename if involved as source on cu # # What if we were to attempt to do directory rename detection when someone # "mostly" moved a directory but still left some files around, or, -# equivalently, fully renamed a directory in one commmit and then recreated +# equivalently, fully renamed a directory in one commit and then recreated # that directory in a later commit adding some new files and then tried to # merge? # @@ -786,7 +796,7 @@ test_expect_success '3b-check: Avoid implicit rename if involved as source on cu # Expected: y/{b,c,d}, z/{e,f} # NOTE: Even though most files from z moved to y, we don't want f to follow. -test_expect_success '4a-setup: Directory split, with original directory still present' ' +test_setup_4a () { test_create_repo 4a && ( cd 4a && @@ -818,9 +828,10 @@ test_expect_success '4a-setup: Directory split, with original directory still pr test_tick && git commit -m "B" ) -' +} -test_expect_success '4a-check: Directory split, with original directory still present' ' +test_expect_success '4a: Directory split, with original directory still present' ' + test_setup_4a && ( cd 4a && @@ -874,7 +885,7 @@ test_expect_success '4a-check: Directory split, with original directory still pr # of history, giving us no way to represent this conflict in the # index. -test_expect_success '5a-setup: Merge directories, other side adds files to original and target' ' +test_setup_5a () { test_create_repo 5a && ( cd 5a && @@ -907,9 +918,10 @@ test_expect_success '5a-setup: Merge directories, other side adds files to origi test_tick && git commit -m "B" ) -' +} -test_expect_success '5a-check: Merge directories, other side adds files to original and target' ' +test_expect_success '5a: Merge directories, other side adds files to original and target' ' + test_setup_5a && ( cd 5a && @@ -941,14 +953,14 @@ test_expect_success '5a-check: Merge directories, other side adds files to origi # Commit B: z/{b,c,d_1,e}, y/d_3 # Expected: y/{b,c,e}, CONFLICT(add/add: y/d_2 vs. y/d_3) # NOTE: If z/d_1 in commit B were to be involved in dir rename detection, as -# we normaly would since z/ is being renamed to y/, then this would be +# we normally would since z/ is being renamed to y/, then this would be # a rename/delete (z/d_1 -> y/d_1 vs. deleted) AND an add/add/add # conflict of y/d_1 vs. y/d_2 vs. y/d_3. Add/add/add is not # representable in the index, so the existence of y/d_3 needs to # cause us to bail on directory rename detection for that path, falling # back to git behavior without the directory rename detection. -test_expect_success '5b-setup: Rename/delete in order to get add/add/add conflict' ' +test_setup_5b () { test_create_repo 5b && ( cd 5b && @@ -981,9 +993,10 @@ test_expect_success '5b-setup: Rename/delete in order to get add/add/add conflic test_tick && git commit -m "B" ) -' +} -test_expect_success '5b-check: Rename/delete in order to get add/add/add conflict' ' +test_expect_success '5b: Rename/delete in order to get add/add/add conflict' ' + test_setup_5b && ( cd 5b && @@ -1024,7 +1037,7 @@ test_expect_success '5b-check: Rename/delete in order to get add/add/add conflic # y/d are y/d_2 and y/d_4. We still do the move from z/e to y/e, # though, because it doesn't have anything in the way. -test_expect_success '5c-setup: Transitive rename would cause rename/rename/rename/add/add/add' ' +test_setup_5c () { test_create_repo 5c && ( cd 5c && @@ -1061,9 +1074,10 @@ test_expect_success '5c-setup: Transitive rename would cause rename/rename/renam test_tick && git commit -m "B" ) -' +} -test_expect_success '5c-check: Transitive rename would cause rename/rename/rename/add/add/add' ' +test_expect_success '5c: Transitive rename would cause rename/rename/rename/add/add/add' ' + test_setup_5c && ( cd 5c && @@ -1113,7 +1127,7 @@ test_expect_success '5c-check: Transitive rename would cause rename/rename/renam # detection for z/d_2, but that doesn't prevent us from applying the # directory rename detection for z/f -> y/f. -test_expect_success '5d-setup: Directory/file/file conflict due to directory rename' ' +test_setup_5d () { test_create_repo 5d && ( cd 5d && @@ -1145,9 +1159,10 @@ test_expect_success '5d-setup: Directory/file/file conflict due to directory ren test_tick && git commit -m "B" ) -' +} -test_expect_success '5d-check: Directory/file/file conflict due to directory rename' ' +test_expect_success '5d: Directory/file/file conflict due to directory rename' ' + test_setup_5d && ( cd 5d && @@ -1205,7 +1220,7 @@ test_expect_success '5d-check: Directory/file/file conflict due to directory ren # them under y/ doesn't accidentally catch z/d and make it look like # it is also involved in a rename/delete conflict. -test_expect_success '6a-setup: Tricky rename/delete' ' +test_setup_6a () { test_create_repo 6a && ( cd 6a && @@ -1235,9 +1250,10 @@ test_expect_success '6a-setup: Tricky rename/delete' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6a-check: Tricky rename/delete' ' +test_expect_success '6a: Tricky rename/delete' ' + test_setup_6a && ( cd 6a && @@ -1271,7 +1287,7 @@ test_expect_success '6a-check: Tricky rename/delete' ' # but B did that rename and still decided to put the file into z/, # so we probably shouldn't apply directory rename detection for it. -test_expect_success '6b-setup: Same rename done on both sides' ' +test_setup_6b () { test_create_repo 6b && ( cd 6b && @@ -1300,9 +1316,10 @@ test_expect_success '6b-setup: Same rename done on both sides' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6b-check: Same rename done on both sides' ' +test_expect_success '6b: Same rename done on both sides' ' + test_setup_6b && ( cd 6b && @@ -1334,7 +1351,7 @@ test_expect_success '6b-check: Same rename done on both sides' ' # NOTE: Seems obvious, but just checking that the implementation doesn't # "accidentally detect a rename" and give us y/{b,c,d}. -test_expect_success '6c-setup: Rename only done on same side' ' +test_setup_6c () { test_create_repo 6c && ( cd 6c && @@ -1362,9 +1379,10 @@ test_expect_success '6c-setup: Rename only done on same side' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6c-check: Rename only done on same side' ' +test_expect_success '6c: Rename only done on same side' ' + test_setup_6c && ( cd 6c && @@ -1396,7 +1414,7 @@ test_expect_success '6c-check: Rename only done on same side' ' # NOTE: Again, this seems obvious but just checking that the implementation # doesn't "accidentally detect a rename" and give us y/{b,c,d}. -test_expect_success '6d-setup: We do not always want transitive renaming' ' +test_setup_6d () { test_create_repo 6d && ( cd 6d && @@ -1424,9 +1442,10 @@ test_expect_success '6d-setup: We do not always want transitive renaming' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6d-check: We do not always want transitive renaming' ' +test_expect_success '6d: We do not always want transitive renaming' ' + test_setup_6d && ( cd 6d && @@ -1458,7 +1477,7 @@ test_expect_success '6d-check: We do not always want transitive renaming' ' # doesn't "accidentally detect a rename" and give us y/{b,c} + # add/add conflict on y/d_1 vs y/d_2. -test_expect_success '6e-setup: Add/add from one side' ' +test_setup_6e () { test_create_repo 6e && ( cd 6e && @@ -1487,9 +1506,10 @@ test_expect_success '6e-setup: Add/add from one side' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6e-check: Add/add from one side' ' +test_expect_success '6e: Add/add from one side' ' + test_setup_6e && ( cd 6e && @@ -1552,7 +1572,7 @@ test_expect_success '6e-check: Add/add from one side' ' # Expected: y/d, CONFLICT(rename/rename for both z/b and z/c) # NOTE: There's a rename of z/ here, y/ has more renames, so z/d -> y/d. -test_expect_success '7a-setup: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' +test_setup_7a () { test_create_repo 7a && ( cd 7a && @@ -1583,9 +1603,10 @@ test_expect_success '7a-setup: rename-dir vs. rename-dir (NOT split evenly) PLUS test_tick && git commit -m "B" ) -' +} -test_expect_success '7a-check: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' +test_expect_success '7a: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' + test_setup_7a && ( cd 7a && @@ -1623,7 +1644,7 @@ test_expect_success '7a-check: rename-dir vs. rename-dir (NOT split evenly) PLUS # Commit B: z/{b,c,d_1}, w/d_2 # Expected: y/{b,c}, CONFLICT(rename/rename(2to1): x/d_1, w/d_2 -> y_d) -test_expect_success '7b-setup: rename/rename(2to1), but only due to transitive rename' ' +test_setup_7b () { test_create_repo 7b && ( cd 7b && @@ -1655,9 +1676,10 @@ test_expect_success '7b-setup: rename/rename(2to1), but only due to transitive r test_tick && git commit -m "B" ) -' +} -test_expect_success '7b-check: rename/rename(2to1), but only due to transitive rename' ' +test_expect_success '7b: rename/rename(2to1), but only due to transitive rename' ' + test_setup_7b && ( cd 7b && @@ -1702,7 +1724,7 @@ test_expect_success '7b-check: rename/rename(2to1), but only due to transitive r # neither CONFLICT(x/d -> w/d vs. z/d) # nor CONFLiCT x/d -> w/d vs. y/d vs. z/d) -test_expect_success '7c-setup: rename/rename(1to...2or3); transitive rename may add complexity' ' +test_setup_7c () { test_create_repo 7c && ( cd 7c && @@ -1732,9 +1754,10 @@ test_expect_success '7c-setup: rename/rename(1to...2or3); transitive rename may test_tick && git commit -m "B" ) -' +} -test_expect_success '7c-check: rename/rename(1to...2or3); transitive rename may add complexity' ' +test_expect_success '7c: rename/rename(1to...2or3); transitive rename may add complexity' ' + test_setup_7c && ( cd 7c && @@ -1766,7 +1789,7 @@ test_expect_success '7c-check: rename/rename(1to...2or3); transitive rename may # Expected: y/{b,c}, CONFLICT(delete x/d vs rename to y/d) # NOTE: z->y so NOT CONFLICT(delete x/d vs rename to z/d) -test_expect_success '7d-setup: transitive rename involved in rename/delete; how is it reported?' ' +test_setup_7d () { test_create_repo 7d && ( cd 7d && @@ -1796,9 +1819,10 @@ test_expect_success '7d-setup: transitive rename involved in rename/delete; how test_tick && git commit -m "B" ) -' +} -test_expect_success '7d-check: transitive rename involved in rename/delete; how is it reported?' ' +test_expect_success '7d: transitive rename involved in rename/delete; how is it reported?' ' + test_setup_7d && ( cd 7d && @@ -1851,7 +1875,7 @@ test_expect_success '7d-check: transitive rename involved in rename/delete; how # see testcases 9c and 9d for further discussion of this issue and # how it's resolved. -test_expect_success '7e-setup: transitive rename in rename/delete AND dirs in the way' ' +test_setup_7e () { test_create_repo 7e && ( cd 7e && @@ -1886,9 +1910,10 @@ test_expect_success '7e-setup: transitive rename in rename/delete AND dirs in th test_tick && git commit -m "B" ) -' +} -test_expect_success '7e-check: transitive rename in rename/delete AND dirs in the way' ' +test_expect_success '7e: transitive rename in rename/delete AND dirs in the way' ' + test_setup_7e && ( cd 7e && @@ -1945,7 +1970,7 @@ test_expect_success '7e-check: transitive rename in rename/delete AND dirs in th # simple rule from section 5 prevents me from handling this as optimally as # we potentially could. -test_expect_success '8a-setup: Dual-directory rename, one into the others way' ' +test_setup_8a () { test_create_repo 8a && ( cd 8a && @@ -1977,9 +2002,10 @@ test_expect_success '8a-setup: Dual-directory rename, one into the others way' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '8a-check: Dual-directory rename, one into the others way' ' +test_expect_success '8a: Dual-directory rename, one into the others way' ' + test_setup_8a && ( cd 8a && @@ -2023,7 +2049,7 @@ test_expect_success '8a-check: Dual-directory rename, one into the others way' ' # making us fall back to pre-directory-rename-detection behavior for both # e_1 and e_2. -test_expect_success '8b-setup: Dual-directory rename, one into the others way, with conflicting filenames' ' +test_setup_8b () { test_create_repo 8b && ( cd 8b && @@ -2055,9 +2081,10 @@ test_expect_success '8b-setup: Dual-directory rename, one into the others way, w test_tick && git commit -m "B" ) -' +} -test_expect_success '8b-check: Dual-directory rename, one into the others way, with conflicting filenames' ' +test_expect_success '8b: Dual-directory rename, one into the others way, with conflicting filenames' ' + test_setup_8b && ( cd 8b && @@ -2089,14 +2116,14 @@ test_expect_success '8b-check: Dual-directory rename, one into the others way, w # # Note: It could easily be argued that the correct resolution here is # y/{b,c,e}, CONFLICT(rename/delete: z/d -> y/d vs deleted) -# and that the modifed version of d should be present in y/ after +# and that the modified version of d should be present in y/ after # the merge, just marked as conflicted. Indeed, I previously did # argue that. But applying directory renames to the side of # history where a file is merely modified results in spurious # rename/rename(1to2) conflicts -- see testcase 9h. See also # notes in 8d. -test_expect_success '8c-setup: modify/delete or rename+modify/delete?' ' +test_setup_8c () { test_create_repo 8c && ( cd 8c && @@ -2127,9 +2154,10 @@ test_expect_success '8c-setup: modify/delete or rename+modify/delete?' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '8c-check: modify/delete or rename+modify/delete' ' +test_expect_success '8c: modify/delete or rename+modify/delete' ' + test_setup_8c && ( cd 8c && @@ -2175,7 +2203,7 @@ test_expect_success '8c-check: modify/delete or rename+modify/delete' ' # during merging are supposed to be about opposite sides doing things # differently. -test_expect_success '8d-setup: rename/delete...or not?' ' +test_setup_8d () { test_create_repo 8d && ( cd 8d && @@ -2204,9 +2232,10 @@ test_expect_success '8d-setup: rename/delete...or not?' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '8d-check: rename/delete...or not?' ' +test_expect_success '8d: rename/delete...or not?' ' + test_setup_8d && ( cd 8d && @@ -2250,7 +2279,7 @@ test_expect_success '8d-check: rename/delete...or not?' ' # about the ramifications of doing that, I didn't know how to rule out # that opening other weird edge and corner cases so I just punted. -test_expect_success '8e-setup: Both sides rename, one side adds to original directory' ' +test_setup_8e () { test_create_repo 8e && ( cd 8e && @@ -2279,9 +2308,10 @@ test_expect_success '8e-setup: Both sides rename, one side adds to original dire test_tick && git commit -m "B" ) -' +} -test_expect_success '8e-check: Both sides rename, one side adds to original directory' ' +test_expect_success '8e: Both sides rename, one side adds to original directory' ' + test_setup_8e && ( cd 8e && @@ -2333,7 +2363,7 @@ test_expect_success '8e-check: Both sides rename, one side adds to original dire # of which one had the most paths going to it. A naive implementation # of that could take the new file in commit B at z/i to x/w/i or x/i. -test_expect_success '9a-setup: Inner renamed directory within outer renamed directory' ' +test_setup_9a () { test_create_repo 9a && ( cd 9a && @@ -2366,9 +2396,10 @@ test_expect_success '9a-setup: Inner renamed directory within outer renamed dire test_tick && git commit -m "B" ) -' +} -test_expect_success '9a-check: Inner renamed directory within outer renamed directory' ' +test_expect_success '9a: Inner renamed directory within outer renamed directory' ' + test_setup_9a && ( cd 9a && @@ -2404,7 +2435,7 @@ test_expect_success '9a-check: Inner renamed directory within outer renamed dire # Commit B: z/{b,c,d_3} # Expected: y/{b,c,d_merged} -test_expect_success '9b-setup: Transitive rename with content merge' ' +test_setup_9b () { test_create_repo 9b && ( cd 9b && @@ -2436,9 +2467,10 @@ test_expect_success '9b-setup: Transitive rename with content merge' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '9b-check: Transitive rename with content merge' ' +test_expect_success '9b: Transitive rename with content merge' ' + test_setup_9b && ( cd 9b && @@ -2491,7 +2523,7 @@ test_expect_success '9b-check: Transitive rename with content merge' ' # away, then ignore that particular rename from the other side of # history for any implicit directory renames. -test_expect_success '9c-setup: Doubly transitive rename?' ' +test_setup_9c () { test_create_repo 9c && ( cd 9c && @@ -2526,9 +2558,10 @@ test_expect_success '9c-setup: Doubly transitive rename?' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '9c-check: Doubly transitive rename?' ' +test_expect_success '9c: Doubly transitive rename?' ' + test_setup_9c && ( cd 9c && @@ -2579,7 +2612,7 @@ test_expect_success '9c-check: Doubly transitive rename?' ' # simple rules that are consistent with what we need for all the other # testcases and simplifies things for the user. -test_expect_success '9d-setup: N-way transitive rename?' ' +test_setup_9d () { test_create_repo 9d && ( cd 9d && @@ -2614,9 +2647,10 @@ test_expect_success '9d-setup: N-way transitive rename?' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '9d-check: N-way transitive rename?' ' +test_expect_success '9d: N-way transitive rename?' ' + test_setup_9d && ( cd 9d && @@ -2653,7 +2687,7 @@ test_expect_success '9d-check: N-way transitive rename?' ' # Expected: combined/{a,b,c,d,e,f,g,h,i,j,k,l}, CONFLICT(Nto1) warnings, # dir1/yo, dir2/yo, dir3/yo, dirN/yo -test_expect_success '9e-setup: N-to-1 whammo' ' +test_setup_9e () { test_create_repo 9e && ( cd 9e && @@ -2696,9 +2730,10 @@ test_expect_success '9e-setup: N-to-1 whammo' ' test_tick && git commit -m "B" ) -' +} -test_expect_success C_LOCALE_OUTPUT '9e-check: N-to-1 whammo' ' +test_expect_success C_LOCALE_OUTPUT '9e: N-to-1 whammo' ' + test_setup_9e && ( cd 9e && @@ -2745,7 +2780,7 @@ test_expect_success C_LOCALE_OUTPUT '9e-check: N-to-1 whammo' ' # Commit B: goal/{a,b}/$more_files, goal/c # Expected: priority/{a,b}/$more_files, priority/c -test_expect_success '9f-setup: Renamed directory that only contained immediate subdirs' ' +test_setup_9f () { test_create_repo 9f && ( cd 9f && @@ -2774,9 +2809,10 @@ test_expect_success '9f-setup: Renamed directory that only contained immediate s test_tick && git commit -m "B" ) -' +} -test_expect_success '9f-check: Renamed directory that only contained immediate subdirs' ' +test_expect_success '9f: Renamed directory that only contained immediate subdirs' ' + test_setup_9f && ( cd 9f && @@ -2809,7 +2845,7 @@ test_expect_success '9f-check: Renamed directory that only contained immediate s # Commit B: goal/{a,b}/$more_files, goal/c # Expected: priority/{alpha,bravo}/$more_files, priority/c -test_expect_success '9g-setup: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' +test_setup_9g () { test_create_repo 9g && ( cd 9g && @@ -2841,9 +2877,9 @@ test_expect_success '9g-setup: Renamed directory that only contained immediate s test_tick && git commit -m "B" ) -' +} -test_expect_failure '9g-check: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' +test_expect_failure '9g: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' ( cd 9g && @@ -2877,7 +2913,7 @@ test_expect_failure '9g-check: Renamed directory that only contained immediate s # Expected: y/{b,c}, x/d_2 # NOTE: If we applied the z/ -> y/ rename to z/d, then we'd end up with # a rename/rename(1to2) conflict (z/d -> y/d vs. x/d) -test_expect_success '9h-setup: Avoid dir rename on merely modified path' ' +test_setup_9h () { test_create_repo 9h && ( cd 9h && @@ -2910,9 +2946,10 @@ test_expect_success '9h-setup: Avoid dir rename on merely modified path' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '9h-check: Avoid dir rename on merely modified path' ' +test_expect_success '9h: Avoid dir rename on merely modified path' ' + test_setup_9h && ( cd 9h && @@ -2957,7 +2994,7 @@ test_expect_success '9h-check: Avoid dir rename on merely modified path' ' # Expected: Aborted Merge + # ERROR_MSG(untracked working tree files would be overwritten by merge) -test_expect_success '10a-setup: Overwrite untracked with normal rename/delete' ' +test_setup_10a () { test_create_repo 10a && ( cd 10a && @@ -2983,9 +3020,10 @@ test_expect_success '10a-setup: Overwrite untracked with normal rename/delete' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '10a-check: Overwrite untracked with normal rename/delete' ' +test_expect_success '10a: Overwrite untracked with normal rename/delete' ' + test_setup_10a && ( cd 10a && @@ -3021,7 +3059,7 @@ test_expect_success '10a-check: Overwrite untracked with normal rename/delete' ' # z/c_1 -> z/d_1 rename recorded at stage 3 for y/d + # ERROR_MSG(refusing to lose untracked file at 'y/d') -test_expect_success '10b-setup: Overwrite untracked with dir rename + delete' ' +test_setup_10b () { test_create_repo 10b && ( cd 10b && @@ -3050,9 +3088,10 @@ test_expect_success '10b-setup: Overwrite untracked with dir rename + delete' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '10b-check: Overwrite untracked with dir rename + delete' ' +test_expect_success '10b: Overwrite untracked with dir rename + delete' ' + test_setup_10b && ( cd 10b && @@ -3098,10 +3137,10 @@ test_expect_success '10b-check: Overwrite untracked with dir rename + delete' ' # y/c~B^0 + # ERROR_MSG(Refusing to lose untracked file at y/c) -test_expect_success '10c-setup: Overwrite untracked with dir rename/rename(1to2)' ' - test_create_repo 10c && +test_setup_10c () { + test_create_repo 10c_$1 && ( - cd 10c && + cd 10c_$1 && mkdir z x && echo a >z/a && @@ -3128,11 +3167,12 @@ test_expect_success '10c-setup: Overwrite untracked with dir rename/rename(1to2) test_tick && git commit -m "B" ) -' +} -test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2)' ' +test_expect_success '10c1: Overwrite untracked with dir rename/rename(1to2)' ' + test_setup_10c 1 && ( - cd 10c && + cd 10c_1 && git checkout A^0 && echo important >y/c && @@ -3163,9 +3203,10 @@ test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2) ) ' -test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2), other direction' ' +test_expect_success '10c2: Overwrite untracked with dir rename/rename(1to2), other direction' ' + test_setup_10c 2 && ( - cd 10c && + cd 10c_2 && git reset --hard && git clean -fdqx && @@ -3208,7 +3249,7 @@ test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2) # CONFLICT(rename/rename) z/c_1 vs x/f_2 -> y/wham # ERROR_MSG(Refusing to lose untracked file at y/wham) -test_expect_success '10d-setup: Delete untracked with dir rename/rename(2to1)' ' +test_setup_10d () { test_create_repo 10d && ( cd 10d && @@ -3240,9 +3281,10 @@ test_expect_success '10d-setup: Delete untracked with dir rename/rename(2to1)' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' +test_expect_success '10d: Delete untracked with dir rename/rename(2to1)' ' + test_setup_10d && ( cd 10d && @@ -3290,7 +3332,7 @@ test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' # Commit B: z/{a,b,c} # Expected: y/{a,b,c} + untracked z/c -test_expect_success '10e-setup: Does git complain about untracked file that is not really in the way?' ' +test_setup_10e () { test_create_repo 10e && ( cd 10e && @@ -3317,9 +3359,9 @@ test_expect_success '10e-setup: Does git complain about untracked file that is n test_tick && git commit -m "B" ) -' +} -test_expect_failure '10e-check: Does git complain about untracked file that is not really in the way?' ' +test_expect_failure '10e: Does git complain about untracked file that is not really in the way?' ' ( cd 10e && @@ -3371,7 +3413,7 @@ test_expect_failure '10e-check: Does git complain about untracked file that is n # z/c~HEAD with contents of B:z/b_v2, # z/c with uncommitted mods on top of A:z/c_v1 -test_expect_success '11a-setup: Avoid losing dirty contents with simple rename' ' +test_setup_11a () { test_create_repo 11a && ( cd 11a && @@ -3398,9 +3440,10 @@ test_expect_success '11a-setup: Avoid losing dirty contents with simple rename' test_tick && git commit -m "B" ) -' +} -test_expect_success '11a-check: Avoid losing dirty contents with simple rename' ' +test_expect_success '11a: Avoid losing dirty contents with simple rename' ' + test_setup_11a && ( cd 11a && @@ -3441,7 +3484,7 @@ test_expect_success '11a-check: Avoid losing dirty contents with simple rename' # ERROR_MSG(Refusing to lose dirty file at z/c) -test_expect_success '11b-setup: Avoid losing dirty file involved in directory rename' ' +test_setup_11b () { test_create_repo 11b && ( cd 11b && @@ -3470,9 +3513,10 @@ test_expect_success '11b-setup: Avoid losing dirty file involved in directory re test_tick && git commit -m "B" ) -' +} -test_expect_success '11b-check: Avoid losing dirty file involved in directory rename' ' +test_expect_success '11b: Avoid losing dirty file involved in directory rename' ' + test_setup_11b && ( cd 11b && @@ -3515,7 +3559,7 @@ test_expect_success '11b-check: Avoid losing dirty file involved in directory re # Expected: Abort_msg("following files would be overwritten by merge") + # y/c left untouched (still has uncommitted mods) -test_expect_success '11c-setup: Avoid losing not-uptodate with rename + D/F conflict' ' +test_setup_11c () { test_create_repo 11c && ( cd 11c && @@ -3545,9 +3589,10 @@ test_expect_success '11c-setup: Avoid losing not-uptodate with rename + D/F conf test_tick && git commit -m "B" ) -' +} -test_expect_success '11c-check: Avoid losing not-uptodate with rename + D/F conflict' ' +test_expect_success '11c: Avoid losing not-uptodate with rename + D/F conflict' ' + test_setup_11c && ( cd 11c && @@ -3581,7 +3626,7 @@ test_expect_success '11c-check: Avoid losing not-uptodate with rename + D/F conf # Warning_Msg("Refusing to lose dirty file at z/c) + # y/{a,c~HEAD,c/d}, x/b, now-untracked z/c_v1 with uncommitted mods -test_expect_success '11d-setup: Avoid losing not-uptodate with rename + D/F conflict' ' +test_setup_11d () { test_create_repo 11d && ( cd 11d && @@ -3612,9 +3657,10 @@ test_expect_success '11d-setup: Avoid losing not-uptodate with rename + D/F conf test_tick && git commit -m "B" ) -' +} -test_expect_success '11d-check: Avoid losing not-uptodate with rename + D/F conflict' ' +test_expect_success '11d: Avoid losing not-uptodate with rename + D/F conflict' ' + test_setup_11d && ( cd 11d && @@ -3659,7 +3705,7 @@ test_expect_success '11d-check: Avoid losing not-uptodate with rename + D/F conf # y/c~HEAD has A:y/c_2 contents # y/c has dirty file from before merge -test_expect_success '11e-setup: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' +test_setup_11e () { test_create_repo 11e && ( cd 11e && @@ -3691,9 +3737,10 @@ test_expect_success '11e-setup: Avoid deleting not-uptodate with dir rename/rena test_tick && git commit -m "B" ) -' +} -test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' +test_expect_success '11e: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' + test_setup_11e && ( cd 11e && @@ -3744,7 +3791,7 @@ test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rena # CONFLICT(rename/rename) x/c vs x/d -> y/wham # ERROR_MSG(Refusing to lose dirty file at y/wham) -test_expect_success '11f-setup: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' +test_setup_11f () { test_create_repo 11f && ( cd 11f && @@ -3773,9 +3820,10 @@ test_expect_success '11f-setup: Avoid deleting not-uptodate with dir rename/rena test_tick && git commit -m "B" ) -' +} -test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' +test_expect_success '11f: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' + test_setup_11f && ( cd 11f && @@ -3832,7 +3880,7 @@ test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rena # Commit B: node1/{leaf1,leaf2,leaf5}, node2/{leaf3,leaf4,leaf6} # Expected: node1/{leaf1,leaf2,leaf5,node2/{leaf3,leaf4,leaf6}} -test_expect_success '12a-setup: Moving one directory hierarchy into another' ' +test_setup_12a () { test_create_repo 12a && ( cd 12a && @@ -3862,9 +3910,10 @@ test_expect_success '12a-setup: Moving one directory hierarchy into another' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '12a-check: Moving one directory hierarchy into another' ' +test_expect_success '12a: Moving one directory hierarchy into another' ' + test_setup_12a && ( cd 12a && @@ -3910,7 +3959,7 @@ test_expect_success '12a-check: Moving one directory hierarchy into another' ' # To which, I can do no more than shrug my shoulders and say that # even simple rules give weird results when given weird inputs. -test_expect_success '12b-setup: Moving two directory hierarchies into each other' ' +test_setup_12b () { test_create_repo 12b && ( cd 12b && @@ -3938,9 +3987,10 @@ test_expect_success '12b-setup: Moving two directory hierarchies into each other test_tick && git commit -m "B" ) -' +} -test_expect_success '12b-check: Moving two directory hierarchies into each other' ' +test_expect_success '12b: Moving two directory hierarchies into each other' ' + test_setup_12b && ( cd 12b && @@ -3976,7 +4026,7 @@ test_expect_success '12b-check: Moving two directory hierarchies into each other # NOTE: This is *exactly* like 12c, except that every path is modified on # each side of the merge. -test_expect_success '12c-setup: Moving one directory hierarchy into another w/ content merge' ' +test_setup_12c () { test_create_repo 12c && ( cd 12c && @@ -4008,9 +4058,10 @@ test_expect_success '12c-setup: Moving one directory hierarchy into another w/ c test_tick && git commit -m "B" ) -' +} -test_expect_success '12c-check: Moving one directory hierarchy into another w/ content merge' ' +test_expect_success '12c: Moving one directory hierarchy into another w/ content merge' ' + test_setup_12c && ( cd 12c && @@ -4051,6 +4102,122 @@ test_expect_success '12c-check: Moving one directory hierarchy into another w/ c ) ' +# Testcase 12d, Rename/merge of subdirectory into the root +# Commit O: a/b/subdir/foo +# Commit A: subdir/foo +# Commit B: a/b/subdir/foo, a/b/bar +# Expected: subdir/foo, bar + +test_setup_12d () { + test_create_repo 12d && + ( + cd 12d && + + mkdir -p a/b/subdir && + test_commit a/b/subdir/foo && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir subdir && + git mv a/b/subdir/foo.t subdir/foo.t && + test_tick && + git commit -m "A" && + + git checkout B && + test_commit a/b/bar + ) +} + +test_expect_success '12d: Rename/merge subdir into the root, variant 1' ' + test_setup_12d && + ( + cd 12d && + + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 2 out && + + git rev-parse >actual \ + HEAD:subdir/foo.t HEAD:bar.t && + git rev-parse >expect \ + O:a/b/subdir/foo.t B:a/b/bar.t && + test_cmp expect actual && + + git hash-object bar.t >actual && + git rev-parse B:a/b/bar.t >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:a/b/subdir/foo.t && + test_must_fail git rev-parse HEAD:a/b/bar.t && + test_path_is_missing a/ && + test_path_is_file bar.t + ) +' + +# Testcase 12e, Rename/merge of subdirectory into the root +# Commit O: a/b/foo +# Commit A: foo +# Commit B: a/b/foo, a/b/bar +# Expected: foo, bar + +test_setup_12e () { + test_create_repo 12e && + ( + cd 12e && + + mkdir -p a/b && + test_commit a/b/foo && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir subdir && + git mv a/b/foo.t foo.t && + test_tick && + git commit -m "A" && + + git checkout B && + test_commit a/b/bar + ) +} + +test_expect_success '12e: Rename/merge subdir into the root, variant 2' ' + test_setup_12e && + ( + cd 12e && + + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 2 out && + + git rev-parse >actual \ + HEAD:foo.t HEAD:bar.t && + git rev-parse >expect \ + O:a/b/foo.t B:a/b/bar.t && + test_cmp expect actual && + + git hash-object bar.t >actual && + git rev-parse B:a/b/bar.t >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:a/b/foo.t && + test_must_fail git rev-parse HEAD:a/b/bar.t && + test_path_is_missing a/ && + test_path_is_file bar.t + ) +' + ########################################################################### # SECTION 13: Checking informational and conflict messages # @@ -4068,10 +4235,10 @@ test_expect_success '12c-check: Moving one directory hierarchy into another w/ c # Commit B: z/{b,c,d,e/f} # Expected: y/{b,c,d,e/f}, with notices/conflicts for both y/d and y/e/f -test_expect_success '13a-setup: messages for newly added files' ' - test_create_repo 13a && +test_setup_13a () { + test_create_repo 13a_$1 && ( - cd 13a && + cd 13a_$1 && mkdir z && echo b >z/b && @@ -4097,11 +4264,12 @@ test_expect_success '13a-setup: messages for newly added files' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '13a-check(conflict): messages for newly added files' ' +test_expect_success '13a(conflict): messages for newly added files' ' + test_setup_13a conflict && ( - cd 13a && + cd 13a_conflict && git checkout A^0 && @@ -4121,9 +4289,10 @@ test_expect_success '13a-check(conflict): messages for newly added files' ' ) ' -test_expect_success '13a-check(info): messages for newly added files' ' +test_expect_success '13a(info): messages for newly added files' ' + test_setup_13a info && ( - cd 13a && + cd 13a_info && git reset --hard && git checkout A^0 && @@ -4153,10 +4322,10 @@ test_expect_success '13a-check(info): messages for newly added files' ' # Expected: y/{b,c,d_merged}, with two conflict messages for y/d, # one about content, and one about file location -test_expect_success '13b-setup: messages for transitive rename with conflicted content' ' - test_create_repo 13b && +test_setup_13b () { + test_create_repo 13b_$1 && ( - cd 13b && + cd 13b_$1 && mkdir x && mkdir z && @@ -4185,11 +4354,12 @@ test_expect_success '13b-setup: messages for transitive rename with conflicted c test_tick && git commit -m "B" ) -' +} -test_expect_success '13b-check(conflict): messages for transitive rename with conflicted content' ' +test_expect_success '13b(conflict): messages for transitive rename with conflicted content' ' + test_setup_13b conflict && ( - cd 13b && + cd 13b_conflict && git checkout A^0 && @@ -4207,9 +4377,10 @@ test_expect_success '13b-check(conflict): messages for transitive rename with co ) ' -test_expect_success '13b-check(info): messages for transitive rename with conflicted content' ' +test_expect_success '13b(info): messages for transitive rename with conflicted content' ' + test_setup_13b info && ( - cd 13b && + cd 13b_info && git reset --hard && git checkout A^0 && @@ -4238,10 +4409,10 @@ test_expect_success '13b-check(info): messages for transitive rename with confli # d and B had full knowledge, but that's a slippery slope as # shown in testcase 13d. -test_expect_success '13c-setup: messages for rename/rename(1to1) via transitive rename' ' - test_create_repo 13c && +test_setup_13c () { + test_create_repo 13c_$1 && ( - cd 13c && + cd 13c_$1 && mkdir x && mkdir z && @@ -4269,11 +4440,12 @@ test_expect_success '13c-setup: messages for rename/rename(1to1) via transitive test_tick && git commit -m "B" ) -' +} -test_expect_success '13c-check(conflict): messages for rename/rename(1to1) via transitive rename' ' +test_expect_success '13c(conflict): messages for rename/rename(1to1) via transitive rename' ' + test_setup_13c conflict && ( - cd 13c && + cd 13c_conflict && git checkout A^0 && @@ -4290,9 +4462,10 @@ test_expect_success '13c-check(conflict): messages for rename/rename(1to1) via t ) ' -test_expect_success '13c-check(info): messages for rename/rename(1to1) via transitive rename' ' +test_expect_success '13c(info): messages for rename/rename(1to1) via transitive rename' ' + test_setup_13c info && ( - cd 13c && + cd 13c_info && git reset --hard && git checkout A^0 && @@ -4324,10 +4497,10 @@ test_expect_success '13c-check(info): messages for rename/rename(1to1) via trans # * B renames a/y to c/y, and A renames c/->d/ => a/y -> d/y # No conflict in where a/y ends up, so put it in d/y. -test_expect_success '13d-setup: messages for rename/rename(1to1) via dual transitive rename' ' - test_create_repo 13d && +test_setup_13d () { + test_create_repo 13d_$1 && ( - cd 13d && + cd 13d_$1 && mkdir a && mkdir b && @@ -4356,11 +4529,12 @@ test_expect_success '13d-setup: messages for rename/rename(1to1) via dual transi test_tick && git commit -m "B" ) -' +} -test_expect_success '13d-check(conflict): messages for rename/rename(1to1) via dual transitive rename' ' +test_expect_success '13d(conflict): messages for rename/rename(1to1) via dual transitive rename' ' + test_setup_13d conflict && ( - cd 13d && + cd 13d_conflict && git checkout A^0 && @@ -4380,9 +4554,10 @@ test_expect_success '13d-check(conflict): messages for rename/rename(1to1) via d ) ' -test_expect_success '13d-check(info): messages for rename/rename(1to1) via dual transitive rename' ' +test_expect_success '13d(info): messages for rename/rename(1to1) via dual transitive rename' ' + test_setup_13d info && ( - cd 13d && + cd 13d_info && git reset --hard && git checkout A^0 && @@ -4448,7 +4623,7 @@ test_expect_success '13d-check(info): messages for rename/rename(1to1) via dual # in the outer merge for this special kind of setup, but it at # least avoids hitting a BUG(). # -test_expect_success '13e-setup: directory rename detection in recursive case' ' +test_setup_13e () { test_create_repo 13e && ( cd 13e && @@ -4493,9 +4668,10 @@ test_expect_success '13e-setup: directory rename detection in recursive case' ' test_tick && git commit -m "D" ) -' +} -test_expect_success '13e-check: directory rename detection in recursive case' ' +test_expect_success '13e: directory rename detection in recursive case' ' + test_setup_13e && ( cd 13e && diff --git a/t/t6046-merge-skip-unneeded-updates.sh b/t/t6046-merge-skip-unneeded-updates.sh index 3a47623ed3..1ddc9e6626 100755 --- a/t/t6046-merge-skip-unneeded-updates.sh +++ b/t/t6046-merge-skip-unneeded-updates.sh @@ -36,10 +36,10 @@ test_description="merge cases" # Commit B: b_3 # Expected: b_2 -test_expect_success '1a-setup: Modify(A)/Modify(B), change on B subset of A' ' - test_create_repo 1a && +test_setup_1a () { + test_create_repo 1a_$1 && ( - cd 1a && + cd 1a_$1 && test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && git add b && @@ -62,26 +62,24 @@ test_expect_success '1a-setup: Modify(A)/Modify(B), change on B subset of A' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1a-check-L: Modify(A)/Modify(B), change on B subset of A' ' - test_when_finished "git -C 1a reset --hard" && - test_when_finished "git -C 1a clean -fd" && +test_expect_success '1a-L: Modify(A)/Modify(B), change on B subset of A' ' + test_setup_1a L && ( - cd 1a && + cd 1a_L && git checkout A^0 && - test-tool chmtime =31337 b && - test-tool chmtime -v +0 b >expected-mtime && + test-tool chmtime --get -3600 b >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep "Skipped b" out && test_must_be_empty err && - test-tool chmtime -v +0 b >actual-mtime && - test_cmp expected-mtime actual-mtime && + # Make sure b was NOT updated + test-tool chmtime --get b >new-mtime && + test_cmp old-mtime new-mtime && git ls-files -s >index_files && test_line_count = 1 index_files && @@ -96,17 +94,20 @@ test_expect_success '1a-check-L: Modify(A)/Modify(B), change on B subset of A' ' ) ' -test_expect_success '1a-check-R: Modify(A)/Modify(B), change on B subset of A' ' - test_when_finished "git -C 1a reset --hard" && - test_when_finished "git -C 1a clean -fd" && +test_expect_success '1a-R: Modify(A)/Modify(B), change on B subset of A' ' + test_setup_1a R && ( - cd 1a && + cd 1a_R && git checkout B^0 && + test-tool chmtime --get -3600 b >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && - test_i18ngrep "Auto-merging b" out && + # Make sure b WAS updated + test-tool chmtime --get b >new-mtime && + test $(cat old-mtime) -lt $(cat new-mtime) && + test_must_be_empty err && git ls-files -s >index_files && @@ -133,10 +134,10 @@ test_expect_success '1a-check-R: Modify(A)/Modify(B), change on B subset of A' ' # Commit B: c_1 # Expected: c_2 -test_expect_success '2a-setup: Modify(A)/rename(B)' ' - test_create_repo 2a && +test_setup_2a () { + test_create_repo 2a_$1 && ( - cd 2a && + cd 2a_$1 && test_seq 1 10 >b && git add b && @@ -158,20 +159,19 @@ test_expect_success '2a-setup: Modify(A)/rename(B)' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '2a-check-L: Modify/rename, merge into modify side' ' - test_when_finished "git -C 2a reset --hard" && - test_when_finished "git -C 2a clean -fd" && +test_expect_success '2a-L: Modify/rename, merge into modify side' ' + test_setup_2a L && ( - cd 2a && + cd 2a_L && git checkout A^0 && + test_path_is_missing c && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep ! "Skipped c" out && - test_must_be_empty err && + test_path_is_file c && git ls-files -s >index_files && test_line_count = 1 index_files && @@ -189,17 +189,20 @@ test_expect_success '2a-check-L: Modify/rename, merge into modify side' ' ) ' -test_expect_success '2a-check-R: Modify/rename, merge into rename side' ' - test_when_finished "git -C 2a reset --hard" && - test_when_finished "git -C 2a clean -fd" && +test_expect_success '2a-R: Modify/rename, merge into rename side' ' + test_setup_2a R && ( - cd 2a && + cd 2a_R && git checkout B^0 && + test-tool chmtime --get -3600 c >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && - test_i18ngrep ! "Skipped c" out && + # Make sure c WAS updated + test-tool chmtime --get c >new-mtime && + test $(cat old-mtime) -lt $(cat new-mtime) && + test_must_be_empty err && git ls-files -s >index_files && @@ -224,10 +227,10 @@ test_expect_success '2a-check-R: Modify/rename, merge into rename side' ' # Commit B: b_3 # Expected: c_2 -test_expect_success '2b-setup: Rename+Mod(A)/Mod(B), B mods subset of A' ' - test_create_repo 2b && +test_setup_2b () { + test_create_repo 2b_$1 && ( - cd 2b && + cd 2b_$1 && test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && git add b && @@ -251,26 +254,23 @@ test_expect_success '2b-setup: Rename+Mod(A)/Mod(B), B mods subset of A' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '2b-check-L: Rename+Mod(A)/Mod(B), B mods subset of A' ' - test_when_finished "git -C 2b reset --hard" && - test_when_finished "git -C 2b clean -fd" && +test_expect_success '2b-L: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_setup_2b L && ( - cd 2b && + cd 2b_L && git checkout A^0 && - test-tool chmtime =31337 c && - test-tool chmtime -v +0 c >expected-mtime && - + test-tool chmtime --get -3600 c >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep "Skipped c" out && test_must_be_empty err && - test-tool chmtime -v +0 c >actual-mtime && - test_cmp expected-mtime actual-mtime && + # Make sure c WAS updated + test-tool chmtime --get c >new-mtime && + test_cmp old-mtime new-mtime && git ls-files -s >index_files && test_line_count = 1 index_files && @@ -288,17 +288,19 @@ test_expect_success '2b-check-L: Rename+Mod(A)/Mod(B), B mods subset of A' ' ) ' -test_expect_success '2b-check-R: Rename+Mod(A)/Mod(B), B mods subset of A' ' - test_when_finished "git -C 2b reset --hard" && - test_when_finished "git -C 2b clean -fd" && +test_expect_success '2b-R: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_setup_2b R && ( - cd 2b && + cd 2b_R && git checkout B^0 && + test_path_is_missing c && GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && - test_i18ngrep "Auto-merging c" out && + # Make sure c now present (and thus was updated) + test_path_is_file c && + test_must_be_empty err && git ls-files -s >index_files && @@ -332,7 +334,7 @@ test_expect_success '2b-check-R: Rename+Mod(A)/Mod(B), B mods subset of A' ' # skip the update, then we're in trouble. This test verifies we do # not make that particular mistake. -test_expect_success '2c-setup: Modify b & add c VS rename b->c' ' +test_setup_2c () { test_create_repo 2c && ( cd 2c && @@ -358,21 +360,26 @@ test_expect_success '2c-setup: Modify b & add c VS rename b->c' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '2c-check: Modify b & add c VS rename b->c' ' +test_expect_success '2c: Modify b & add c VS rename b->c' ' + test_setup_2c && ( cd 2c && git checkout A^0 && + test-tool chmtime --get -3600 c >old-mtime && GIT_MERGE_VERBOSITY=3 && export GIT_MERGE_VERBOSITY && test_must_fail git merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/add): Rename b->c" out && - test_i18ngrep ! "Skipped c" out && - test_must_be_empty err + test_must_be_empty err && + + # Make sure c WAS updated + test-tool chmtime --get c >new-mtime && + test $(cat old-mtime) -lt $(cat new-mtime) # FIXME: rename/add conflicts are horribly broken right now; # when I get back to my patch series fixing it and @@ -428,10 +435,10 @@ test_expect_success '2c-check: Modify b & add c VS rename b->c' ' # Commit B: bq_1, bar/whatever # Expected: bar/{bq_2, whatever} -test_expect_success '3a-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_create_repo 3a && +test_setup_3a () { + test_create_repo 3a_$1 && ( - cd 3a && + cd 3a_$1 && mkdir foo && test_seq 1 10 >bq && @@ -456,21 +463,22 @@ test_expect_success '3a-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '3a-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_when_finished "git -C 3a reset --hard" && - test_when_finished "git -C 3a clean -fd" && +test_expect_success '3a-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_setup_3a L && ( - cd 3a && + cd 3a_L && git checkout A^0 && + test_path_is_missing bar/bq && GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && - test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && + test_path_is_file bar/bq && + git ls-files -s >index_files && test_line_count = 2 index_files && @@ -487,19 +495,20 @@ test_expect_success '3a-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' ) ' -test_expect_success '3a-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_when_finished "git -C 3a reset --hard" && - test_when_finished "git -C 3a clean -fd" && +test_expect_success '3a-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_setup_3a R && ( - cd 3a && + cd 3a_R && git checkout B^0 && + test_path_is_missing bar/bq && GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive A^0 >out 2>err && - test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && + test_path_is_file bar/bq && + git ls-files -s >index_files && test_line_count = 2 index_files && @@ -522,10 +531,10 @@ test_expect_success '3a-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' # Commit B: bq_2, bar/whatever # Expected: bar/{bq_2, whatever} -test_expect_success '3b-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_create_repo 3b && +test_setup_3b () { + test_create_repo 3b_$1 && ( - cd 3b && + cd 3b_$1 && mkdir foo && test_seq 1 10 >bq && @@ -550,21 +559,22 @@ test_expect_success '3b-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '3b-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_when_finished "git -C 3b reset --hard" && - test_when_finished "git -C 3b clean -fd" && +test_expect_success '3b-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_setup_3b L && ( - cd 3b && + cd 3b_L && git checkout A^0 && + test_path_is_missing bar/bq && GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && - test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && + test_path_is_file bar/bq && + git ls-files -s >index_files && test_line_count = 2 index_files && @@ -581,19 +591,20 @@ test_expect_success '3b-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' ) ' -test_expect_success '3b-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_when_finished "git -C 3b reset --hard" && - test_when_finished "git -C 3b clean -fd" && +test_expect_success '3b-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_setup_3b R && ( - cd 3b && + cd 3b_R && git checkout B^0 && + test_path_is_missing bar/bq && GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive A^0 >out 2>err && - test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && + test_path_is_file bar/bq && + git ls-files -s >index_files && test_line_count = 2 index_files && @@ -621,7 +632,7 @@ test_expect_success '3b-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' # Working copy: b_4 # Expected: b_2 for merge, b_4 in working copy -test_expect_success '4a-setup: Change on A, change on B subset of A, dirty mods present' ' +test_setup_4a () { test_create_repo 4a && ( cd 4a && @@ -647,7 +658,7 @@ test_expect_success '4a-setup: Change on A, change on B subset of A, dirty mods test_tick && git commit -m "B" ) -' +} # NOTE: For as long as we continue using unpack_trees() without index_only # set to true, it will error out on a case like this claiming the the locally @@ -655,25 +666,23 @@ test_expect_success '4a-setup: Change on A, change on B subset of A, dirty mods # correct requires doing the merge in-memory first, then realizing that no # updates to the file are necessary, and thus that we can just leave the path # alone. -test_expect_failure '4a-check: Change on A, change on B subset of A, dirty mods present' ' - test_when_finished "git -C 4a reset --hard" && - test_when_finished "git -C 4a clean -fd" && +test_expect_failure '4a: Change on A, change on B subset of A, dirty mods present' ' + test_setup_4a && ( cd 4a && git checkout A^0 && echo "File rewritten" >b && - test-tool chmtime =31337 b && - test-tool chmtime -v +0 b >expected-mtime && + test-tool chmtime --get -3600 b >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep "Skipped b" out && test_must_be_empty err && - test-tool chmtime -v +0 b >actual-mtime && - test_cmp expected-mtime actual-mtime && + # Make sure b was NOT updated + test-tool chmtime --get b >new-mtime && + test_cmp old-mtime new-mtime && git ls-files -s >index_files && test_line_count = 1 index_files && @@ -695,7 +704,7 @@ test_expect_failure '4a-check: Change on A, change on B subset of A, dirty mods # Working copy: c_4 # Expected: c_2 -test_expect_success '4b-setup: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' +test_setup_4b () { test_create_repo 4b && ( cd 4b && @@ -722,27 +731,25 @@ test_expect_success '4b-setup: Rename+Mod(A)/Mod(B), change on B subset of A, di test_tick && git commit -m "B" ) -' +} -test_expect_success '4b-check: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' - test_when_finished "git -C 4b reset --hard" && - test_when_finished "git -C 4b clean -fd" && +test_expect_success '4b: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' + test_setup_4b && ( cd 4b && git checkout A^0 && echo "File rewritten" >c && - test-tool chmtime =31337 c && - test-tool chmtime -v +0 c >expected-mtime && + test-tool chmtime --get -3600 c >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep "Skipped c" out && test_must_be_empty err && - test-tool chmtime -v +0 c >actual-mtime && - test_cmp expected-mtime actual-mtime && + # Make sure c was NOT updated + test-tool chmtime --get c >new-mtime && + test_cmp old-mtime new-mtime && git ls-files -s >index_files && test_line_count = 1 index_files && diff --git a/t/t6047-diff3-conflict-markers.sh b/t/t6047-diff3-conflict-markers.sh index 860542aad0..f4655bb358 100755 --- a/t/t6047-diff3-conflict-markers.sh +++ b/t/t6047-diff3-conflict-markers.sh @@ -186,7 +186,7 @@ test_expect_success 'check multiple merge bases' ' ) ' -test_expect_success 'rebase describes fake ancestor base' ' +test_expect_success 'rebase --merge describes parent of commit being picked' ' test_create_repo rebase && ( cd rebase && @@ -194,7 +194,16 @@ test_expect_success 'rebase describes fake ancestor base' ' test_commit master file && git checkout -b side HEAD^ && test_commit side file && - test_must_fail git -c merge.conflictstyle=diff3 rebase master && + test_must_fail git -c merge.conflictstyle=diff3 rebase --merge master && + grep "||||||| parent of" file + ) +' + +test_expect_success 'rebase --apply describes fake ancestor base' ' + ( + cd rebase && + git rebase --abort && + test_must_fail git -c merge.conflictstyle=diff3 rebase --apply master && grep "||||||| constructed merge base" file ) ' diff --git a/t/t6102-rev-list-unexpected-objects.sh b/t/t6102-rev-list-unexpected-objects.sh index 28611c978e..52cde097dd 100755 --- a/t/t6102-rev-list-unexpected-objects.sh +++ b/t/t6102-rev-list-unexpected-objects.sh @@ -52,7 +52,7 @@ test_expect_success 'traverse unexpected non-commit parent (lone)' ' ' test_expect_success 'traverse unexpected non-commit parent (seen)' ' - test_must_fail git rev-list --objects $commit $broken_commit \ + test_must_fail git rev-list --objects $blob $broken_commit \ >output 2>&1 && test_i18ngrep "not a commit" output ' diff --git a/t/t6113-rev-list-bitmap-filters.sh b/t/t6113-rev-list-bitmap-filters.sh new file mode 100755 index 0000000000..2b551e6fd0 --- /dev/null +++ b/t/t6113-rev-list-bitmap-filters.sh @@ -0,0 +1,77 @@ +#!/bin/sh + +test_description='rev-list combining bitmaps and filters' +. ./test-lib.sh + +test_expect_success 'set up bitmapped repo' ' + # one commit will have bitmaps, the other will not + test_commit one && + test_commit much-larger-blob-one && + git repack -adb && + test_commit two && + test_commit much-larger-blob-two +' + +test_expect_success 'filters fallback to non-bitmap traversal' ' + # use a path-based filter, since they are inherently incompatible with + # bitmaps (i.e., this test will never get confused by later code to + # combine the features) + filter=$(echo "!one" | git hash-object -w --stdin) && + git rev-list --objects --filter=sparse:oid=$filter HEAD >expect && + git rev-list --use-bitmap-index \ + --objects --filter=sparse:oid=$filter HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'blob:none filter' ' + git rev-list --objects --filter=blob:none HEAD >expect && + git rev-list --use-bitmap-index \ + --objects --filter=blob:none HEAD >actual && + test_bitmap_traversal expect actual +' + +test_expect_success 'blob:none filter with specified blob' ' + git rev-list --objects --filter=blob:none HEAD HEAD:two.t >expect && + git rev-list --use-bitmap-index \ + --objects --filter=blob:none HEAD HEAD:two.t >actual && + test_bitmap_traversal expect actual +' + +test_expect_success 'blob:limit filter' ' + git rev-list --objects --filter=blob:limit=5 HEAD >expect && + git rev-list --use-bitmap-index \ + --objects --filter=blob:limit=5 HEAD >actual && + test_bitmap_traversal expect actual +' + +test_expect_success 'blob:limit filter with specified blob' ' + git rev-list --objects --filter=blob:limit=5 \ + HEAD HEAD:much-larger-blob-two.t >expect && + git rev-list --use-bitmap-index \ + --objects --filter=blob:limit=5 \ + HEAD HEAD:much-larger-blob-two.t >actual && + test_bitmap_traversal expect actual +' + +test_expect_success 'tree:0 filter' ' + git rev-list --objects --filter=tree:0 HEAD >expect && + git rev-list --use-bitmap-index \ + --objects --filter=tree:0 HEAD >actual && + test_bitmap_traversal expect actual +' + +test_expect_success 'tree:0 filter with specified blob, tree' ' + git rev-list --objects --filter=tree:0 HEAD HEAD:two.t >expect && + git rev-list --use-bitmap-index \ + --objects --filter=tree:0 HEAD HEAD:two.t >actual && + test_bitmap_traversal expect actual +' + +test_expect_success 'tree:1 filter' ' + git rev-list --objects --filter=tree:1 HEAD >expect && + git rev-list --use-bitmap-index \ + --objects --filter=tree:1 HEAD >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index 45047d0a72..f822d5d328 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -1,28 +1,27 @@ #!/bin/sh -test_description='test describe +test_description='test describe' + +# o---o-----o----o----o-------o----x +# \ D,R e / +# \---o-------------o-' +# \ B / +# `-o----o----o-' +# A c +# +# First parent of a merge commit is on the same line, second parent below. - B - .--------------o----o----o----x - / / / - o----o----o----o----o----. / - \ A c / - .------------o---o---o - D,R e -' . ./test-lib.sh check_describe () { expect="$1" shift - R=$(git describe "$@" 2>err.actual) - S=$? - cat err.actual >&3 - test_expect_success "describe $*" ' - test $S = 0 && + describe_opts="$@" + test_expect_success "describe $describe_opts" ' + R=$(git describe $describe_opts 2>err.actual) && case "$R" in $expect) echo happy ;; - *) echo "Oops - $R is not $expect"; + *) echo "Oops - $R is not $expect" && false ;; esac ' @@ -130,12 +129,30 @@ test_expect_success 'rename tag A to Q locally' ' mv .git/refs/tags/A .git/refs/tags/Q ' cat - >err.expect <<EOF -warning: tag 'A' is really 'Q' here +warning: tag 'Q' is externally known as 'A' EOF check_describe A-* HEAD test_expect_success 'warning was displayed for Q' ' test_i18ncmp err.expect err.actual ' +test_expect_success 'misnamed annotated tag forces long output' ' + description=$(git describe --no-long Q^0) && + expr "$description" : "A-0-g[0-9a-f]*$" && + git rev-parse --verify "$description" >actual && + git rev-parse --verify Q^0 >expect && + test_cmp expect actual +' + +test_expect_success 'abbrev=0 will not break misplaced tag (1)' ' + description=$(git describe --abbrev=0 Q^0) && + expr "$description" : "A-0-g[0-9a-f]*$" +' + +test_expect_success 'abbrev=0 will not break misplaced tag (2)' ' + description=$(git describe --abbrev=0 c^0) && + expr "$description" : "A-1-g[0-9a-f]*$" +' + test_expect_success 'rename tag Q back to A' ' mv .git/refs/tags/Q .git/refs/tags/A ' @@ -382,7 +399,7 @@ test_expect_success 'describe tag object' ' test_i18ngrep "fatal: test-blob-1 is neither a commit nor blob" actual ' -test_expect_failure ULIMIT_STACK_SIZE 'name-rev works in a deep repo' ' +test_expect_success ULIMIT_STACK_SIZE 'name-rev works in a deep repo' ' i=1 && while test $i -lt 8000 do @@ -439,4 +456,96 @@ test_expect_success 'name-rev a rev shortly after epoch' ' test_cmp expect actual ' +# A--------------master +# \ / +# \----------M2 +# \ / +# \---M1-C +# \ / +# B +test_expect_success 'name-rev covers all conditions while looking at parents' ' + git init repo && + ( + cd repo && + + echo A >file && + git add file && + git commit -m A && + A=$(git rev-parse HEAD) && + + git checkout --detach && + echo B >file && + git commit -m B file && + B=$(git rev-parse HEAD) && + + git checkout $A && + git merge --no-ff $B && # M1 + + echo C >file && + git commit -m C file && + + git checkout $A && + git merge --no-ff HEAD@{1} && # M2 + + git checkout master && + git merge --no-ff HEAD@{1} && + + echo "$B master^2^2~1^2" >expect && + git name-rev $B >actual && + + test_cmp expect actual + ) +' + +# B +# o +# \ +# o-----o---o----x +# A +# +test_expect_success 'describe commits with disjoint bases' ' + git init disjoint1 && + ( + cd disjoint1 && + + echo o >> file && git add file && git commit -m o && + echo A >> file && git add file && git commit -m A && + git tag A -a -m A && + echo o >> file && git add file && git commit -m o && + + git checkout --orphan branch && rm file && + echo B > file2 && git add file2 && git commit -m B && + git tag B -a -m B && + git merge --no-ff --allow-unrelated-histories master -m x && + + check_describe "A-3-*" HEAD + ) +' + +# B +# o---o---o------------. +# \ +# o---o---x +# A +# +test_expect_success 'describe commits with disjoint bases 2' ' + git init disjoint2 && + ( + cd disjoint2 && + + echo A >> file && git add file && GIT_COMMITTER_DATE="2020-01-01 18:00" git commit -m A && + git tag A -a -m A && + echo o >> file && git add file && GIT_COMMITTER_DATE="2020-01-01 18:01" git commit -m o && + + git checkout --orphan branch && + echo o >> file2 && git add file2 && GIT_COMMITTER_DATE="2020-01-01 15:00" git commit -m o && + echo o >> file2 && git add file2 && GIT_COMMITTER_DATE="2020-01-01 15:01" git commit -m o && + echo B >> file2 && git add file2 && GIT_COMMITTER_DATE="2020-01-01 15:02" git commit -m B && + git tag B -a -m B && + git merge --no-ff --allow-unrelated-histories master -m x && + + check_describe "B-3-*" HEAD + ) +' + test_done diff --git a/t/t6130-pathspec-noglob.sh b/t/t6130-pathspec-noglob.sh index 37760233a5..ba7902c9cd 100755 --- a/t/t6130-pathspec-noglob.sh +++ b/t/t6130-pathspec-noglob.sh @@ -10,6 +10,7 @@ test_expect_success 'create commits with glob characters' ' # the name "f*" in the worktree, because it is not allowed # on Windows (the tests below do not depend on the presence # of the file in the worktree) + git config core.protectNTFS false && git update-index --add --cacheinfo 100644 "$(git rev-parse HEAD:foo)" "f*" && test_tick && git commit -m star && diff --git a/t/t6136-pathspec-in-bare.sh b/t/t6136-pathspec-in-bare.sh new file mode 100755 index 0000000000..b117251366 --- /dev/null +++ b/t/t6136-pathspec-in-bare.sh @@ -0,0 +1,38 @@ +#!/bin/sh + +test_description='diagnosing out-of-scope pathspec' + +. ./test-lib.sh + +test_expect_success 'setup a bare and non-bare repository' ' + test_commit file1 && + git clone --bare . bare +' + +test_expect_success 'log and ls-files in a bare repository' ' + ( + cd bare && + test_must_fail git log -- .. >out 2>err && + test_must_be_empty out && + test_i18ngrep "outside repository" err && + + test_must_fail git ls-files -- .. >out 2>err && + test_must_be_empty out && + test_i18ngrep "outside repository" err + ) +' + +test_expect_success 'log and ls-files in .git directory' ' + ( + cd .git && + test_must_fail git log -- .. >out 2>err && + test_must_be_empty out && + test_i18ngrep "outside repository" err && + + test_must_fail git ls-files -- .. >out 2>err && + test_must_be_empty out && + test_i18ngrep "outside repository" err + ) +' + +test_done diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 8a72b4c43a..e4c2a6eca4 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -6,6 +6,7 @@ test_description='fmt-merge-msg test' . ./test-lib.sh +. "$TEST_DIRECTORY/lib-gpg.sh" test_expect_success setup ' echo one >one && @@ -73,6 +74,10 @@ test_expect_success setup ' apos="'\''" ' +test_expect_success GPG 'set up a signed tag' ' + git tag -s -m signed-tag-msg signed-good-tag left +' + test_expect_success 'message for merging local branch' ' echo "Merge branch ${apos}left${apos}" >expected && @@ -83,6 +88,24 @@ test_expect_success 'message for merging local branch' ' test_cmp expected actual ' +test_expect_success GPG 'message for merging local tag signed by good key' ' + git checkout master && + git fetch . signed-good-tag && + git fmt-merge-msg <.git/FETCH_HEAD >actual 2>&1 && + grep "^Merge tag ${apos}signed-good-tag${apos}" actual && + grep "^# gpg: Signature made" actual && + grep "^# gpg: Good signature from" actual +' + +test_expect_success GPG 'message for merging local tag signed by unknown key' ' + git checkout master && + git fetch . signed-good-tag && + GNUPGHOME=. git fmt-merge-msg <.git/FETCH_HEAD >actual 2>&1 && + grep "^Merge tag ${apos}signed-good-tag${apos}" actual && + grep "^# gpg: Signature made" actual && + grep -E "^# gpg: Can${apos}t check signature: (public key not found|No public key)" actual +' + test_expect_success 'message for merging external branch' ' echo "Merge branch ${apos}left${apos} of $(pwd)" >expected && diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 9c910ce746..da59fadc5d 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -20,6 +20,10 @@ setdate_and_increment () { } test_expect_success setup ' + test_oid_cache <<-EOF && + disklen sha1:138 + disklen sha256:154 + EOF setdate_and_increment && echo "Using $datestamp" > one && git add one && @@ -50,6 +54,9 @@ test_atom() { " } +hexlen=$(test_oid hexsz) +disklen=$(test_oid disklen) + test_atom head refname refs/heads/master test_atom head refname: refs/heads/master test_atom head refname:short master @@ -82,9 +89,9 @@ test_atom head push:rstrip=-1 refs test_atom head push:strip=1 remotes/myfork/master test_atom head push:strip=-1 master test_atom head objecttype commit -test_atom head objectsize 171 -test_atom head objectsize:disk 138 -test_atom head deltabase 0000000000000000000000000000000000000000 +test_atom head objectsize $((131 + hexlen)) +test_atom head objectsize:disk $disklen +test_atom head deltabase $ZERO_OID test_atom head objectname $(git rev-parse refs/heads/master) test_atom head objectname:short $(git rev-parse --short refs/heads/master) test_atom head objectname:short=1 $(git rev-parse --short=1 refs/heads/master) @@ -125,11 +132,11 @@ test_atom tag refname:short testtag test_atom tag upstream '' test_atom tag push '' test_atom tag objecttype tag -test_atom tag objectsize 154 -test_atom tag objectsize:disk 138 -test_atom tag '*objectsize:disk' 138 -test_atom tag deltabase 0000000000000000000000000000000000000000 -test_atom tag '*deltabase' 0000000000000000000000000000000000000000 +test_atom tag objectsize $((114 + hexlen)) +test_atom tag objectsize:disk $disklen +test_atom tag '*objectsize:disk' $disklen +test_atom tag deltabase $ZERO_OID +test_atom tag '*deltabase' $ZERO_OID test_atom tag objectname $(git rev-parse refs/tags/testtag) test_atom tag objectname:short $(git rev-parse --short refs/tags/testtag) test_atom head objectname:short=1 $(git rev-parse --short=1 refs/heads/master) @@ -139,7 +146,7 @@ test_atom tag parent '' test_atom tag numparent '' test_atom tag object $(git rev-parse refs/tags/testtag^0) test_atom tag type 'commit' -test_atom tag '*objectname' 'ea122842f48be4afb2d1fc6a4b96c05885ab7463' +test_atom tag '*objectname' $(git rev-parse refs/tags/testtag^{}) test_atom tag '*objecttype' 'commit' test_atom tag author '' test_atom tag authorname '' @@ -643,17 +650,59 @@ test_atom refs/tags/signed-long contents "subject line body contents $sig" -cat >expected <<EOF -$(git rev-parse refs/tags/bogo) <committer@example.com> refs/tags/bogo -$(git rev-parse refs/tags/master) <committer@example.com> refs/tags/master -EOF +test_expect_success 'set up multiple-sort tags' ' + for when in 100000 200000 + do + for email in user1 user2 + do + for ref in ref1 ref2 + do + GIT_COMMITTER_DATE="@$when +0000" \ + GIT_COMMITTER_EMAIL="$email@example.com" \ + git tag -m "tag $ref-$when-$email" \ + multi-$ref-$when-$email || return 1 + done + done + done +' test_expect_success 'Verify sort with multiple keys' ' - git for-each-ref --format="%(objectname) %(taggeremail) %(refname)" --sort=objectname --sort=taggeremail \ - refs/tags/bogo refs/tags/master > actual && + cat >expected <<-\EOF && + 100000 <user1@example.com> refs/tags/multi-ref2-100000-user1 + 100000 <user1@example.com> refs/tags/multi-ref1-100000-user1 + 100000 <user2@example.com> refs/tags/multi-ref2-100000-user2 + 100000 <user2@example.com> refs/tags/multi-ref1-100000-user2 + 200000 <user1@example.com> refs/tags/multi-ref2-200000-user1 + 200000 <user1@example.com> refs/tags/multi-ref1-200000-user1 + 200000 <user2@example.com> refs/tags/multi-ref2-200000-user2 + 200000 <user2@example.com> refs/tags/multi-ref1-200000-user2 + EOF + git for-each-ref \ + --format="%(taggerdate:unix) %(taggeremail) %(refname)" \ + --sort=-refname \ + --sort=taggeremail \ + --sort=taggerdate \ + "refs/tags/multi-*" >actual && test_cmp expected actual ' +test_expect_success 'equivalent sorts fall back on refname' ' + cat >expected <<-\EOF && + 100000 <user1@example.com> refs/tags/multi-ref1-100000-user1 + 100000 <user2@example.com> refs/tags/multi-ref1-100000-user2 + 100000 <user1@example.com> refs/tags/multi-ref2-100000-user1 + 100000 <user2@example.com> refs/tags/multi-ref2-100000-user2 + 200000 <user1@example.com> refs/tags/multi-ref1-200000-user1 + 200000 <user2@example.com> refs/tags/multi-ref1-200000-user2 + 200000 <user1@example.com> refs/tags/multi-ref2-200000-user1 + 200000 <user2@example.com> refs/tags/multi-ref2-200000-user2 + EOF + git for-each-ref \ + --format="%(taggerdate:unix) %(taggeremail) %(refname)" \ + --sort=taggerdate \ + "refs/tags/multi-*" >actual && + test_cmp expected actual +' test_expect_success 'do not dereference NULL upon %(HEAD) on unborn branch' ' test_when_finished "git checkout master" && @@ -888,4 +937,44 @@ test_expect_success 'for-each-ref --ignore-case ignores case' ' test_cmp expect actual ' +test_expect_success 'for-each-ref --ignore-case works on multiple sort keys' ' + # name refs numerically to avoid case-insensitive filesystem conflicts + nr=0 && + for email in a A b B + do + for subject in a A b B + do + GIT_COMMITTER_EMAIL="$email@example.com" \ + git tag -m "tag $subject" icase-$(printf %02d $nr) && + nr=$((nr+1))|| + return 1 + done + done && + git for-each-ref --ignore-case \ + --format="%(taggeremail) %(subject) %(refname)" \ + --sort=refname \ + --sort=subject \ + --sort=taggeremail \ + refs/tags/icase-* >actual && + cat >expect <<-\EOF && + <a@example.com> tag a refs/tags/icase-00 + <a@example.com> tag A refs/tags/icase-01 + <A@example.com> tag a refs/tags/icase-04 + <A@example.com> tag A refs/tags/icase-05 + <a@example.com> tag b refs/tags/icase-02 + <a@example.com> tag B refs/tags/icase-03 + <A@example.com> tag b refs/tags/icase-06 + <A@example.com> tag B refs/tags/icase-07 + <b@example.com> tag a refs/tags/icase-08 + <b@example.com> tag A refs/tags/icase-09 + <B@example.com> tag a refs/tags/icase-12 + <B@example.com> tag A refs/tags/icase-13 + <b@example.com> tag b refs/tags/icase-10 + <b@example.com> tag B refs/tags/icase-11 + <B@example.com> tag b refs/tags/icase-14 + <B@example.com> tag B refs/tags/icase-15 + EOF + test_cmp expect actual +' + test_done diff --git a/t/t6500-gc.sh b/t/t6500-gc.sh index c0f04dc6b0..0a69a67117 100755 --- a/t/t6500-gc.sh +++ b/t/t6500-gc.sh @@ -103,14 +103,14 @@ test_expect_success 'auto gc with too many loose objects does not attempt to cre ' test_expect_success 'gc --no-quiet' ' - git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && + GIT_PROGRESS_DELAY=0 git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && test_must_be_empty stdout && - test_line_count = 1 stderr && test_i18ngrep "Computing commit graph generation numbers" stderr ' test_expect_success TTY 'with TTY: gc --no-quiet' ' - test_terminal git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && + test_terminal env GIT_PROGRESS_DELAY=0 \ + git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && test_must_be_empty stdout && test_i18ngrep "Enumerating objects" stderr && test_i18ngrep "Computing commit graph generation numbers" stderr diff --git a/t/t6600-test-reach.sh b/t/t6600-test-reach.sh index b24d850036..475564bee7 100755 --- a/t/t6600-test-reach.sh +++ b/t/t6600-test-reach.sh @@ -51,8 +51,10 @@ test_expect_success 'setup' ' done && git commit-graph write --reachable && mv .git/objects/info/commit-graph commit-graph-full && + chmod u+w commit-graph-full && git show-ref -s commit-5-5 | git commit-graph write --stdin-commits && mv .git/objects/info/commit-graph commit-graph-half && + chmod u+w commit-graph-half && git config core.commitGraph true ' diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 80eb13d94e..74b637deb2 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -227,10 +227,10 @@ test_expect_success \ test_expect_success \ 'trying to delete two tags, existing and not, should fail in the 2nd' ' tag_exists mytag && - ! tag_exists myhead && - test_must_fail git tag -d mytag anothertag && + ! tag_exists nonexistingtag && + test_must_fail git tag -d mytag nonexistingtag && ! tag_exists mytag && - ! tag_exists myhead + ! tag_exists nonexistingtag ' test_expect_success 'trying to delete an already deleted tag should fail' \ @@ -517,7 +517,6 @@ test_expect_success \ test_expect_success \ 'trying to create tags giving both -m or -F options should fail' ' echo "message file 1" >msgfile1 && - echo "message file 2" >msgfile2 && ! tag_exists msgtag && test_must_fail git tag -m "message 1" -F msgfile1 msgtag && ! tag_exists msgtag && @@ -1420,7 +1419,7 @@ test_expect_success \ get_tag_header reuse $commit commit $time >expect echo "An annotation to be reused" >> expect test_expect_success \ - 'overwriting an annoted tag should use its previous body' ' + 'overwriting an annotated tag should use its previous body' ' git tag -a -m "An annotation to be reused" reuse && GIT_EDITOR=true git tag -f -a reuse && get_tag_msg reuse >actual && @@ -1727,6 +1726,7 @@ test_expect_success 'recursive tagging should give advice' ' hint: already a tag. If you meant to tag the object that it points to, use: hint: | hint: git tag -f nested annotated-v4.0^{} + hint: Disable this message with "git config advice.nestedTag false" EOF git tag -m nested nested annotated-v4.0 2>actual && test_i18ncmp expect actual diff --git a/t/t7012-skip-worktree-writing.sh b/t/t7012-skip-worktree-writing.sh index 9d1abe50ef..7476781979 100755 --- a/t/t7012-skip-worktree-writing.sh +++ b/t/t7012-skip-worktree-writing.sh @@ -134,6 +134,21 @@ test_expect_success 'git-clean, dirty case' ' test_i18ncmp expected result ' +test_expect_success '--ignore-skip-worktree-entries leaves worktree alone' ' + test_commit keep-me && + git update-index --skip-worktree keep-me.t && + rm keep-me.t && + + : ignoring the worktree && + git update-index --remove --ignore-skip-worktree-entries keep-me.t && + git diff-index --cached --exit-code HEAD && + + : not ignoring the worktree, a deletion is staged && + git update-index --remove keep-me.t && + test_must_fail git diff-index --cached --exit-code HEAD \ + --diff-filter=D -- keep-me.t +' + #TODO test_expect_failure 'git-apply adds file' false #TODO test_expect_failure 'git-apply updates file' false #TODO test_expect_failure 'git-apply removes file' false diff --git a/t/t7030-verify-tag.sh b/t/t7030-verify-tag.sh index 041e319e79..5c5bc32ccb 100755 --- a/t/t7030-verify-tag.sh +++ b/t/t7030-verify-tag.sh @@ -44,8 +44,8 @@ test_expect_success GPG 'create signed tags' ' test_expect_success GPGSM 'create signed tags x509 ' ' test_config gpg.format x509 && test_config user.signingkey $GIT_COMMITTER_EMAIL && - echo 9 >file && test_tick && git commit -a -m "nineth gpgsm-signed" && - git tag -s -m nineth nineth-signed-x509 + echo 9 >file && test_tick && git commit -a -m "ninth gpgsm-signed" && + git tag -s -m ninth ninth-signed-x509 ' test_expect_success GPG 'verify and show signatures' ' @@ -80,10 +80,34 @@ test_expect_success GPG 'verify and show signatures' ' ' test_expect_success GPGSM 'verify and show signatures x509' ' - git verify-tag nineth-signed-x509 2>actual && + git verify-tag ninth-signed-x509 2>actual && grep "Good signature from" actual && ! grep "BAD signature from" actual && - echo nineth-signed-x509 OK + echo ninth-signed-x509 OK +' + +test_expect_success GPGSM 'verify and show signatures x509 with low minTrustLevel' ' + test_config gpg.minTrustLevel undefined && + git verify-tag ninth-signed-x509 2>actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo ninth-signed-x509 OK +' + +test_expect_success GPGSM 'verify and show signatures x509 with matching minTrustLevel' ' + test_config gpg.minTrustLevel fully && + git verify-tag ninth-signed-x509 2>actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo ninth-signed-x509 OK +' + +test_expect_success GPGSM 'verify and show signatures x509 with high minTrustLevel' ' + test_config gpg.minTrustLevel ultimate && + test_must_fail git verify-tag ninth-signed-x509 2>actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo ninth-signed-x509 OK ' test_expect_success GPG 'detect fudged signature' ' @@ -127,10 +151,10 @@ test_expect_success GPG 'verify signatures with --raw' ' ' test_expect_success GPGSM 'verify signatures with --raw x509' ' - git verify-tag --raw nineth-signed-x509 2>actual && + git verify-tag --raw ninth-signed-x509 2>actual && grep "GOODSIG" actual && ! grep "BADSIG" actual && - echo nineth-signed-x509 OK + echo ninth-signed-x509 OK ' test_expect_success GPG 'verify multiple tags' ' @@ -147,7 +171,7 @@ test_expect_success GPG 'verify multiple tags' ' ' test_expect_success GPGSM 'verify multiple tags x509' ' - tags="seventh-signed nineth-signed-x509" && + tags="seventh-signed ninth-signed-x509" && for i in $tags do git verify-tag -v --raw $i || return 1 diff --git a/t/t7061-wtstatus-ignore.sh b/t/t7061-wtstatus-ignore.sh index 0c394cf995..e4cf5484f9 100755 --- a/t/t7061-wtstatus-ignore.sh +++ b/t/t7061-wtstatus-ignore.sh @@ -43,11 +43,16 @@ test_expect_success 'status untracked directory with --ignored -u' ' test_cmp expected actual ' cat >expected <<\EOF -?? untracked/uncommitted +?? untracked/ !! untracked/ignored EOF -test_expect_success 'status prefixed untracked directory with --ignored' ' +test_expect_success 'status of untracked directory with --ignored works with or without prefix' ' + git status --porcelain --ignored >tmp && + grep untracked/ tmp >actual && + rm tmp && + test_cmp expected actual && + git status --porcelain --ignored untracked/ >actual && test_cmp expected actual ' diff --git a/t/t7063-status-untracked-cache.sh b/t/t7063-status-untracked-cache.sh index 190ae149cf..428cff9cf3 100755 --- a/t/t7063-status-untracked-cache.sh +++ b/t/t7063-status-untracked-cache.sh @@ -18,7 +18,7 @@ GIT_FORCE_UNTRACKED_CACHE=true export GIT_FORCE_UNTRACKED_CACHE sync_mtime () { - find . -type d -ls >/dev/null + find . -type d -exec ls -ld {} + >/dev/null } avoid_racy() { @@ -30,6 +30,30 @@ status_is_clean() { test_must_be_empty ../status.actual } +# Ignore_Untracked_Cache, abbreviated to 3 letters because then people can +# compare commands side-by-side, e.g. +# iuc status --porcelain >expect && +# git status --porcelain >actual && +# test_cmp expect actual +iuc () { + git ls-files -s >../current-index-entries + git ls-files -t | sed -ne s/^S.//p >../current-sparse-entries + + GIT_INDEX_FILE=.git/tmp_index + export GIT_INDEX_FILE + git update-index --index-info <../current-index-entries + git update-index --skip-worktree $(cat ../current-sparse-entries) + + git -c core.untrackedCache=false "$@" + ret=$? + + rm ../current-index-entries + rm $GIT_INDEX_FILE + unset GIT_INDEX_FILE + + return $ret +} + test_lazy_prereq UNTRACKED_CACHE ' { git update-index --test-untracked-cache; ret=$?; } && test $ret -ne 1 @@ -95,6 +119,8 @@ test_expect_success 'status first time (empty cache)' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../actual && + iuc status --porcelain >../status.iuc && + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../actual && cat >../trace.expect <<EOF && node creation: 3 @@ -115,6 +141,8 @@ test_expect_success 'status second time (fully populated cache)' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../actual && + iuc status --porcelain >../status.iuc && + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../actual && cat >../trace.expect <<EOF && node creation: 0 @@ -136,6 +164,7 @@ test_expect_success 'modify in root directory, one dir invalidation' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && A done/one A one @@ -145,6 +174,7 @@ A two ?? four ?? three EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../actual && cat >../trace.expect <<EOF && node creation: 0 @@ -183,6 +213,7 @@ test_expect_success 'new .gitignore invalidates recursively' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && A done/one A one @@ -192,6 +223,7 @@ A two ?? dtwo/ ?? three EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../actual && cat >../trace.expect <<EOF && node creation: 0 @@ -230,6 +262,7 @@ test_expect_success 'new info/exclude invalidates everything' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && A done/one A one @@ -237,6 +270,7 @@ A two ?? .gitignore ?? dtwo/ EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../actual && cat >../trace.expect <<EOF && node creation: 0 @@ -286,6 +320,7 @@ test_expect_success 'status after the move' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && A done/one A one @@ -293,6 +328,7 @@ A one ?? dtwo/ ?? two EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../actual && cat >../trace.expect <<EOF && node creation: 0 @@ -343,6 +379,7 @@ test_expect_success 'status after the move' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && A done/one A one @@ -350,6 +387,7 @@ A two ?? .gitignore ?? dtwo/ EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../actual && cat >../trace.expect <<EOF && node creation: 0 @@ -390,10 +428,12 @@ test_expect_success 'status after commit' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && ?? .gitignore ?? dtwo/ EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../actual && cat >../trace.expect <<EOF && node creation: 0 @@ -447,12 +487,14 @@ test_expect_success 'test sparse status with untracked cache' ' avoid_racy && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../status.actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && M done/two ?? .gitignore ?? done/five ?? dtwo/ EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../status.actual && cat >../trace.expect <<EOF && node creation: 0 @@ -487,12 +529,14 @@ test_expect_success 'test sparse status again with untracked cache' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../status.actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && M done/two ?? .gitignore ?? done/five ?? dtwo/ EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../status.actual && cat >../trace.expect <<EOF && node creation: 0 @@ -514,6 +558,7 @@ test_expect_success 'test sparse status with untracked cache and subdir' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../status.actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && M done/two ?? .gitignore @@ -521,6 +566,7 @@ test_expect_success 'test sparse status with untracked cache and subdir' ' ?? done/sub/ ?? dtwo/ EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../status.actual && cat >../trace.expect <<EOF && node creation: 2 @@ -560,6 +606,8 @@ test_expect_success 'test sparse status again with untracked cache and subdir' ' : >../trace && GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ git status --porcelain >../status.actual && + iuc status --porcelain >../status.iuc && + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../status.actual && cat >../trace.expect <<EOF && node creation: 0 @@ -573,6 +621,7 @@ EOF test_expect_success 'move entry in subdir from untracked to cached' ' git add dtwo/two && git status --porcelain >../status.actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && M done/two A dtwo/two @@ -580,12 +629,14 @@ A dtwo/two ?? done/five ?? done/sub/ EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../status.actual ' test_expect_success 'move entry in subdir from cached to untracked' ' git rm --cached dtwo/two && git status --porcelain >../status.actual && + iuc status --porcelain >../status.iuc && cat >../status.expect <<EOF && M done/two ?? .gitignore @@ -593,6 +644,7 @@ test_expect_success 'move entry in subdir from cached to untracked' ' ?? done/sub/ ?? dtwo/ EOF + test_cmp ../status.expect ../status.iuc && test_cmp ../status.expect ../status.actual ' diff --git a/t/t7105-reset-patch.sh b/t/t7105-reset-patch.sh index bd10a96727..fc2a6cf5c7 100755 --- a/t/t7105-reset-patch.sh +++ b/t/t7105-reset-patch.sh @@ -38,6 +38,27 @@ test_expect_success PERL 'git reset -p HEAD^' ' test_i18ngrep "Apply" output ' +test_expect_success PERL 'git reset -p HEAD^^{tree}' ' + test_write_lines n y | git reset -p HEAD^^{tree} >output && + verify_state dir/foo work parent && + verify_saved_state bar && + test_i18ngrep "Apply" output +' + +test_expect_success PERL 'git reset -p HEAD^:dir/foo (blob fails)' ' + set_and_save_state dir/foo work work && + test_must_fail git reset -p HEAD^:dir/foo && + verify_saved_state dir/foo && + verify_saved_state bar +' + +test_expect_success PERL 'git reset -p aaaaaaaa (unknown fails)' ' + set_and_save_state dir/foo work work && + test_must_fail git reset -p aaaaaaaa && + verify_saved_state dir/foo && + verify_saved_state bar +' + # The idea in the rest is that bar sorts first, so we always say 'y' # first and if the path limiter fails it'll apply to bar instead of # dir/foo. There's always an extra 'n' to reject edits to dir/foo in diff --git a/t/t7107-reset-pathspec-file.sh b/t/t7107-reset-pathspec-file.sh new file mode 100755 index 0000000000..cad3a9de9e --- /dev/null +++ b/t/t7107-reset-pathspec-file.sh @@ -0,0 +1,173 @@ +#!/bin/sh + +test_description='reset --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + git add . && + git commit --include . -m "Commit" && + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git status --porcelain -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + git rm fileA.t && + echo fileA.t | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + git rm fileA.t && + echo fileA.t >list && + git reset --pathspec-from-file=list && + + cat >expect <<-\EOF && + D fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + git rm fileA.t fileB.t && + printf "fileA.t\0fileB.t\0" | git reset --pathspec-from-file=- --pathspec-file-nul && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + git rm fileA.t fileB.t && + printf "fileA.t\nfileB.t\n" | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + git rm fileA.t fileB.t && + printf "fileA.t\nfileB.t" | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + git rm fileA.t fileB.t && + printf "fileA.t\r\nfileB.t\r\n" | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git rm fileA.t && + git reset --pathspec-from-file=list && + + cat >expect <<-\EOF && + D fileA.t + EOF + verify_expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + # Note: "git reset" has not yet learned to fail on wrong pathspecs + git reset --pathspec-from-file=list --pathspec-file-nul && + + cat >expect <<-\EOF && + D fileA.t + EOF + test_must_fail verify_expect +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + git rm fileA.t fileB.t fileC.t fileD.t && + printf "fileB.t\nfileC.t\n" | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + D fileC.t + D fileD.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + git rm fileA.t && + + test_must_fail git reset --pathspec-from-file=list --patch 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --patch" err && + + test_must_fail git reset --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git reset --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + test_must_fail git reset --soft --pathspec-from-file=list 2>err && + test_i18ngrep -e "fatal: Cannot do soft reset with paths" err && + + test_must_fail git reset --hard --pathspec-from-file=list 2>err && + test_i18ngrep -e "fatal: Cannot do hard reset with paths" err +' + +test_done diff --git a/t/t7112-reset-submodule.sh b/t/t7112-reset-submodule.sh index a1cb9ff858..67346424a5 100755 --- a/t/t7112-reset-submodule.sh +++ b/t/t7112-reset-submodule.sh @@ -5,7 +5,6 @@ test_description='reset can handle submodules' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-submodule-update.sh -KNOWN_FAILURE_SUBMODULE_RECURSIVE_NESTED=1 KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS=1 KNOWN_FAILURE_SUBMODULE_OVERWRITE_IGNORED_UNTRACKED=1 diff --git a/t/t7300-clean.sh b/t/t7300-clean.sh index 6e6d24c1c3..cb5e34d94c 100755 --- a/t/t7300-clean.sh +++ b/t/t7300-clean.sh @@ -737,4 +737,13 @@ test_expect_success MINGW 'handle clean & core.longpaths = false nicely' ' test_i18ngrep "too long" .git/err ' +test_expect_success 'clean untracked paths by pathspec' ' + git init untracked && + mkdir untracked/dir && + echo >untracked/dir/file.txt && + git -C untracked clean -f dir/file.txt && + ls untracked/dir >actual && + test_must_be_empty actual +' + test_done diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index 691b5fc3bf..956e17abb3 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -55,6 +55,21 @@ test_expect_success 'add aborts on repository with no commits' ' test_i18ncmp expect actual ' +test_expect_success 'status should ignore inner git repo when not added' ' + rm -fr inner && + mkdir inner && + ( + cd inner && + git init && + >t && + git add t && + git commit -m "initial" + ) && + test_must_fail git submodule status inner 2>output.err && + rm -fr inner && + test_i18ngrep "^error: .*did not match any file(s) known to git" output.err +' + test_expect_success 'setup - repository in init subdirectory' ' mkdir init && ( @@ -156,9 +171,11 @@ test_expect_success 'submodule add to .gitignored path fails' ' ( cd addtest-ignore && cat <<-\EOF >expect && - The following path is ignored by one of your .gitignore files: + The following paths are ignored by one of your .gitignore files: submod - Use -f if you really want to add it. + hint: Use -f if you really want to add them. + hint: Turn this message off by running + hint: "git config advice.addIgnoredFile false" EOF # Does not use test_commit due to the ignore echo "*" > .gitignore && @@ -191,6 +208,17 @@ test_expect_success 'submodule add to reconfigure existing submodule with --forc ) ' +test_expect_success 'submodule add relays add --dry-run stderr' ' + test_when_finished "rm -rf addtest/.git/index.lock" && + ( + cd addtest && + : >.git/index.lock && + ! git submodule add "$submodurl" sub-while-locked 2>output.err && + test_i18ngrep "^fatal: .*index\.lock" output.err && + test_path_is_missing sub-while-locked + ) +' + test_expect_success 'submodule add --branch' ' echo "refs/heads/initial" >expect-head && cat <<-\EOF >expect-heads && @@ -356,6 +384,28 @@ test_expect_success 'status should only print one line' ' test_line_count = 1 lines ' +test_expect_success 'status from subdirectory should have the same SHA1' ' + test_when_finished "rmdir addtest/subdir" && + ( + cd addtest && + mkdir subdir && + git submodule status >output && + awk "{print \$1}" <output >expect && + cd subdir && + git submodule status >../output && + awk "{print \$1}" <../output >../actual && + test_cmp ../expect ../actual && + git -C ../submod checkout HEAD^ && + git submodule status >../output && + awk "{print \$1}" <../output >../actual2 && + cd .. && + git submodule status >output && + awk "{print \$1}" <output >expect2 && + test_cmp expect2 actual2 && + ! test_cmp actual actual2 + ) +' + test_expect_success 'setup - fetch commit name from submodule' ' rev1=$(cd .subrepo && git rev-parse HEAD) && printf "rev1: %s\n" "$rev1" && @@ -377,6 +427,14 @@ test_expect_success 'init should register submodule url in .git/config' ' test_cmp expect url ' +test_expect_success 'status should still be "missing" after initializing' ' + rm -fr init && + mkdir init && + git submodule status >lines && + rm -fr init && + grep "^-$rev1" lines +' + test_failure_with_unknown_submodule () { test_must_fail git submodule $1 no-such-submodule 2>output.err && test_i18ngrep "^error: .*no-such-submodule" output.err @@ -880,7 +938,7 @@ test_expect_success 'submodule add --name allows to replace a submodule with ano echo "repo" >expect && test_must_fail git config -f .gitmodules submodule.repo.path && git config -f .gitmodules submodule.repo_new.path >actual && - test_cmp expect actual&& + test_cmp expect actual && echo "$submodurl/repo" >expect && test_must_fail git config -f .gitmodules submodule.repo.url && echo "$submodurl/bare.git" >expect && @@ -952,7 +1010,7 @@ test_expect_success 'submodule add with an existing name fails unless forced' ' test -d repo && echo "repo" >expect && git config -f .gitmodules submodule.repo_new.path >actual && - test_cmp expect actual&& + test_cmp expect actual && echo "$submodurl/repo.git" >expect && git config -f .gitmodules submodule.repo_new.url >actual && test_cmp expect actual && diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index df34c994d2..4fb447a143 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -406,12 +406,26 @@ test_expect_success 'submodule update - command in .git/config' ' ) ' -test_expect_success 'submodule update - command in .gitmodules is ignored' ' +test_expect_success 'submodule update - command in .gitmodules is rejected' ' test_when_finished "git -C super reset --hard HEAD^" && git -C super config -f .gitmodules submodule.submodule.update "!false" && git -C super commit -a -m "add command to .gitmodules file" && git -C super/submodule reset --hard $submodulesha1^ && - git -C super submodule update submodule + test_must_fail git -C super submodule update submodule +' + +test_expect_success 'fsck detects command in .gitmodules' ' + git init command-in-gitmodules && + ( + cd command-in-gitmodules && + git submodule add ../submodule submodule && + test_commit adding-submodule && + + git config -f .gitmodules submodule.submodule.update "!false" && + git add .gitmodules && + test_commit configuring-update && + test_must_fail git fsck + ) ' cat << EOF >expect @@ -480,6 +494,9 @@ test_expect_success 'recursive submodule update - command in .git/config catches ' test_expect_success 'submodule init does not copy command into .git/config' ' + test_when_finished "git -C super update-index --force-remove submodule1" && + test_when_finished git config -f super/.gitmodules \ + --remove-section submodule.submodule1 && (cd super && git ls-files -s submodule >out && H=$(cut -d" " -f2 out) && @@ -488,10 +505,9 @@ test_expect_success 'submodule init does not copy command into .git/config' ' git config -f .gitmodules submodule.submodule1.path submodule1 && git config -f .gitmodules submodule.submodule1.url ../submodule && git config -f .gitmodules submodule.submodule1.update !false && - git submodule init submodule1 && - echo "none" >expect && - git config submodule.submodule1.update >actual && - test_cmp expect actual + test_must_fail git submodule init submodule1 && + test_expect_code 1 git config submodule.submodule1.update >actual && + test_must_be_empty actual ) ' @@ -944,7 +960,7 @@ test_expect_success 'submodule update clone shallow submodule outside of depth' mv -f .gitmodules.tmp .gitmodules && # Some protocol versions (e.g. 2) support fetching # unadvertised objects, so restrict this test to v0. - test_must_fail env GIT_TEST_PROTOCOL_VERSION= \ + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ git submodule update --init --depth=1 2>actual && test_i18ngrep "Direct fetching of that commit failed." actual && git -C ../submodule config uploadpack.allowReachableSHA1InWant true && diff --git a/t/t7408-submodule-reference.sh b/t/t7408-submodule-reference.sh index 34ac28c056..a3892f494b 100755 --- a/t/t7408-submodule-reference.sh +++ b/t/t7408-submodule-reference.sh @@ -122,8 +122,8 @@ test_expect_success 'missing submodule alternate fails clone and submodule updat # update of the submodule succeeds test_must_fail git submodule update --init && # and we have no alternates: - test_must_fail test_alternate_is_used .git/modules/sub/objects/info/alternates sub && - test_must_fail test_path_is_file sub/file1 + test_path_is_missing .git/modules/sub/objects/info/alternates && + test_path_is_missing sub/file1 ) ' @@ -137,7 +137,7 @@ test_expect_success 'ignoring missing submodule alternates passes clone and subm # update of the submodule succeeds git submodule update --init && # and we have no alternates: - test_must_fail test_alternate_is_used .git/modules/sub/objects/info/alternates sub && + test_path_is_missing .git/modules/sub/objects/info/alternates && test_path_is_file sub/file1 ) ' @@ -182,7 +182,7 @@ check_that_two_of_three_alternates_are_used() { # immediate submodule has alternate: test_alternate_is_used .git/modules/subwithsub/objects/info/alternates subwithsub && # but nested submodule has no alternate: - test_must_fail test_alternate_is_used .git/modules/subwithsub/modules/sub/objects/info/alternates subwithsub/sub + test_path_is_missing .git/modules/subwithsub/modules/sub/objects/info/alternates } diff --git a/t/t7410-submodule-checkout-to.sh b/t/t7410-submodule-checkout-to.sh deleted file mode 100755 index f1b492ebc4..0000000000 --- a/t/t7410-submodule-checkout-to.sh +++ /dev/null @@ -1,77 +0,0 @@ -#!/bin/sh - -test_description='Combination of submodules and multiple workdirs' - -. ./test-lib.sh - -base_path=$(pwd -P) - -test_expect_success 'setup: make origin' ' - mkdir -p origin/sub && - ( - cd origin/sub && git init && - echo file1 >file1 && - git add file1 && - git commit -m file1 - ) && - mkdir -p origin/main && - ( - cd origin/main && git init && - git submodule add ../sub && - git commit -m "add sub" - ) && - ( - cd origin/sub && - echo file1updated >file1 && - git add file1 && - git commit -m "file1 updated" - ) && - git -C origin/main/sub pull && - ( - cd origin/main && - git add sub && - git commit -m "sub updated" - ) -' - -test_expect_success 'setup: clone' ' - mkdir clone && - git -C clone clone --recursive "$base_path/origin/main" -' - -rev1_hash_main=$(git --git-dir=origin/main/.git show --pretty=format:%h -q "HEAD~1") -rev1_hash_sub=$(git --git-dir=origin/sub/.git show --pretty=format:%h -q "HEAD~1") - -test_expect_success 'checkout main' ' - mkdir default_checkout && - git -C clone/main worktree add "$base_path/default_checkout/main" "$rev1_hash_main" -' - -test_expect_failure 'can see submodule diffs just after checkout' ' - git -C default_checkout/main diff --submodule master"^!" >out && - grep "file1 updated" out -' - -test_expect_success 'checkout main and initialize independent clones' ' - mkdir fully_cloned_submodule && - git -C clone/main worktree add "$base_path/fully_cloned_submodule/main" "$rev1_hash_main" && - git -C fully_cloned_submodule/main submodule update -' - -test_expect_success 'can see submodule diffs after independent cloning' ' - git -C fully_cloned_submodule/main diff --submodule master"^!" >out && - grep "file1 updated" out -' - -test_expect_success 'checkout sub manually' ' - mkdir linked_submodule && - git -C clone/main worktree add "$base_path/linked_submodule/main" "$rev1_hash_main" && - git -C clone/main/sub worktree add "$base_path/linked_submodule/main/sub" "$rev1_hash_sub" -' - -test_expect_success 'can see submodule diffs after manual checkout of linked submodule' ' - git -C linked_submodule/main diff --submodule master"^!" >out && - grep "file1 updated" out -' - -test_done diff --git a/t/t7415-submodule-names.sh b/t/t7415-submodule-names.sh index 49a37efe9c..f70368bc2e 100755 --- a/t/t7415-submodule-names.sh +++ b/t/t7415-submodule-names.sh @@ -191,4 +191,61 @@ test_expect_success 'fsck detects corrupt .gitmodules' ' ) ' +test_expect_success MINGW 'prevent git~1 squatting on Windows' ' + git init squatting && + ( + cd squatting && + mkdir a && + touch a/..git && + git add a/..git && + test_tick && + git commit -m initial && + + modules="$(test_write_lines \ + "[submodule \"b.\"]" "url = ." "path = c" \ + "[submodule \"b\"]" "url = ." "path = d\\\\a" | + git hash-object -w --stdin)" && + rev="$(git rev-parse --verify HEAD)" && + hash="$(echo x | git hash-object -w --stdin)" && + test_must_fail git update-index --add \ + --cacheinfo 160000,$rev,d\\a 2>err && + test_i18ngrep "Invalid path" err && + git -c core.protectNTFS=false update-index --add \ + --cacheinfo 100644,$modules,.gitmodules \ + --cacheinfo 160000,$rev,c \ + --cacheinfo 160000,$rev,d\\a \ + --cacheinfo 100644,$hash,d./a/x \ + --cacheinfo 100644,$hash,d./a/..git && + test_tick && + git -c core.protectNTFS=false commit -m "module" + ) && + test_must_fail git -c core.protectNTFS=false \ + clone --recurse-submodules squatting squatting-clone 2>err && + test_i18ngrep -e "directory not empty" -e "not an empty directory" err && + ! grep gitdir squatting-clone/d/a/git~2 +' + +test_expect_success 'git dirs of sibling submodules must not be nested' ' + git init nested && + test_commit -C nested nested && + ( + cd nested && + cat >.gitmodules <<-EOF && + [submodule "hippo"] + url = . + path = thing1 + [submodule "hippo/hooks"] + url = . + path = thing2 + EOF + git clone . thing1 && + git clone . thing2 && + git add .gitmodules thing1 thing2 && + test_tick && + git commit -m nested + ) && + test_must_fail git clone --recurse-submodules nested clone 2>err && + test_i18ngrep "is inside git dir" err +' + test_done diff --git a/t/t7416-submodule-dash-url.sh b/t/t7416-submodule-dash-url.sh index 1cd2c1c1ea..eec96e0ba9 100755 --- a/t/t7416-submodule-dash-url.sh +++ b/t/t7416-submodule-dash-url.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='check handling of .gitmodule url with dash' +test_description='check handling of disallowed .gitmodule urls' . ./test-lib.sh test_expect_success 'create submodule with protected dash in url' ' @@ -46,4 +46,159 @@ test_expect_success 'fsck rejects unprotected dash' ' grep gitmodulesUrl err ' +test_expect_success 'trailing backslash is handled correctly' ' + git init testmodule && + test_commit -C testmodule c && + git submodule add ./testmodule && + : ensure that the name ends in a double backslash && + sed -e "s|\\(submodule \"testmodule\\)\"|\\1\\\\\\\\\"|" \ + -e "s|url = .*|url = \" --should-not-be-an-option\"|" \ + <.gitmodules >.new && + mv .new .gitmodules && + git commit -am "Add testmodule" && + test_must_fail git clone --verbose --recurse-submodules . dolly 2>err && + test_i18ngrep ! "unknown option" err +' + +test_expect_success 'fsck rejects missing URL scheme' ' + git checkout --orphan missing-scheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = http::one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules with missing URL scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects relative URL resolving to missing scheme' ' + git checkout --orphan relative-missing-scheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = "..\\../.\\../:one.example.com/foo.git" + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules with relative URL that strips off scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects empty URL scheme' ' + git checkout --orphan empty-scheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = http::://one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules with empty URL scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects relative URL resolving to empty scheme' ' + git checkout --orphan relative-empty-scheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = ../../../:://one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "relative gitmodules URL resolving to empty scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects empty hostname' ' + git checkout --orphan empty-host && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = http:///one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules with extra slashes" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects relative url that produced empty hostname' ' + git checkout --orphan messy-relative && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = ../../..//one.example.com/foo.git + EOF + git add .gitmodules && + test_tick && + git commit -m "gitmodules abusing relative_path" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck permits embedded newline with unrecognized scheme' ' + git checkout --orphan newscheme && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = "data://acjbkd%0akajfdickajkd" + EOF + git add .gitmodules && + git commit -m "gitmodules with unrecognized scheme" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + git push dst HEAD +' + +test_expect_success 'fsck rejects embedded newline in url' ' + # create an orphan branch to avoid existing .gitmodules objects + git checkout --orphan newline && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = "https://one.example.com?%0ahost=two.example.com/foo.git" + EOF + git add .gitmodules && + git commit -m "gitmodules with newline" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + +test_expect_success 'fsck rejects embedded newline in relative url' ' + git checkout --orphan relative-newline && + cat >.gitmodules <<-\EOF && + [submodule "foo"] + url = "./%0ahost=two.example.com/foo.git" + EOF + git add .gitmodules && + git commit -m "relative url with newline" && + test_when_finished "rm -rf dst" && + git init --bare dst && + git -C dst config transfer.fsckObjects true && + test_must_fail git push dst HEAD 2>err && + grep gitmodulesUrl err +' + test_done diff --git a/t/t7417-submodule-path-url.sh b/t/t7417-submodule-path-url.sh index 756af8c4d6..f7e7e94d7b 100755 --- a/t/t7417-submodule-path-url.sh +++ b/t/t7417-submodule-path-url.sh @@ -25,4 +25,21 @@ test_expect_success 'fsck rejects unprotected dash' ' grep gitmodulesPath err ' +test_expect_success MINGW 'submodule paths disallows trailing spaces' ' + git init super && + test_must_fail git -C super submodule add ../upstream "sub " && + + : add "sub", then rename "sub" to "sub ", the hard way && + git -C super submodule add ../upstream sub && + tree=$(git -C super write-tree) && + git -C super ls-tree $tree >tree && + sed "s/sub/sub /" <tree >tree.new && + tree=$(git -C super mktree <tree.new) && + commit=$(echo with space | git -C super commit-tree $tree) && + git -C super update-ref refs/heads/master $commit && + + test_must_fail git clone --recurse-submodules super dst 2>err && + test_i18ngrep "sub " err +' + test_done diff --git a/t/t7420-submodule-set-url.sh b/t/t7420-submodule-set-url.sh new file mode 100755 index 0000000000..ef0cb6e8e1 --- /dev/null +++ b/t/t7420-submodule-set-url.sh @@ -0,0 +1,55 @@ +#!/bin/sh +# +# Copyright (c) 2019 Denton Liu +# + +test_description='Test submodules set-url subcommand + +This test verifies that the set-url subcommand of git-submodule is working +as expected. +' + +TEST_NO_CREATE_REPO=1 +. ./test-lib.sh + +test_expect_success 'submodule config cache setup' ' + mkdir submodule && + ( + cd submodule && + git init && + echo a >file && + git add file && + git commit -ma + ) && + mkdir super && + ( + cd super && + git init && + git submodule add ../submodule && + git commit -m "add submodule" + ) +' + +test_expect_success 'test submodule set-url' ' + # add a commit and move the submodule (change the url) + ( + cd submodule && + echo b >>file && + git add file && + git commit -mb + ) && + mv submodule newsubmodule && + + git -C newsubmodule show >expect && + ( + cd super && + test_must_fail git submodule update --remote && + git submodule set-url submodule ../newsubmodule && + grep -F "url = ../newsubmodule" .gitmodules && + git submodule update --remote + ) && + git -C super/submodule show >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t7500-commit-template-squash-signoff.sh b/t/t7500-commit-template-squash-signoff.sh index 46a5cd4b73..6d19ece05d 100755 --- a/t/t7500-commit-template-squash-signoff.sh +++ b/t/t7500-commit-template-squash-signoff.sh @@ -382,4 +382,13 @@ test_expect_success 'check commit with unstaged rename and copy' ' ) ' +test_expect_success 'commit without staging files fails and displays hints' ' + echo "initial" >file && + git add file && + git commit -m initial && + echo "changes" >>file && + test_must_fail git commit -m update >actual && + test_i18ngrep "no changes added to commit (use \"git add\" and/or \"git commit -a\")" actual +' + test_done diff --git a/t/t7501-commit-basic-functionality.sh b/t/t7501-commit-basic-functionality.sh index f1349af56e..110b4bf459 100755 --- a/t/t7501-commit-basic-functionality.sh +++ b/t/t7501-commit-basic-functionality.sh @@ -150,7 +150,7 @@ test_expect_success 'setup: commit message from file' ' test_expect_success 'amend commit' ' cat >editor <<-\EOF && #!/bin/sh - sed -e "s/a file/an amend commit/g" < "$1" > "$1-" + sed -e "s/a file/an amend commit/g" <"$1" >"$1-" mv "$1-" "$1" EOF chmod 755 editor && @@ -263,7 +263,7 @@ test_expect_success 'using message from other commit' ' test_expect_success 'editing message from other commit' ' cat >editor <<-\EOF && #!/bin/sh - sed -e "s/amend/older/g" < "$1" > "$1-" + sed -e "s/amend/older/g" <"$1" >"$1-" mv "$1-" "$1" EOF chmod 755 editor && @@ -285,9 +285,8 @@ test_expect_success 'overriding author from command line' ' ' test_expect_success PERL 'interactive add' ' - echo 7 | - git commit --interactive | - grep "What now" + echo 7 | test_must_fail git commit --interactive >out && + grep "What now" out ' test_expect_success PERL "commit --interactive doesn't change index if editor aborts" ' @@ -362,12 +361,12 @@ test_expect_success 'amend commit to fix author' ' oldtick=$GIT_AUTHOR_DATE && test_tick && git reset --hard && - git cat-file -p HEAD | + git cat-file -p HEAD >commit && sed -e "s/author.*/author $author $oldtick/" \ - -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" > \ - expected && + -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" \ + commit >expected && git commit --amend --author="$author" && - git cat-file -p HEAD > current && + git cat-file -p HEAD >current && test_cmp expected current ' @@ -377,12 +376,12 @@ test_expect_success 'amend commit to fix date' ' test_tick && newtick=$GIT_AUTHOR_DATE && git reset --hard && - git cat-file -p HEAD | + git cat-file -p HEAD >commit && sed -e "s/author.*/author $author $newtick/" \ - -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" > \ - expected && + -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" \ + commit >expected && git commit --amend --date="$newtick" && - git cat-file -p HEAD > current && + git cat-file -p HEAD >current && test_cmp expected current ' @@ -409,12 +408,13 @@ test_expect_success 'sign off (1)' ' echo 1 >positive && git add positive && git commit -s -m "thank you" && - git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo thank you && echo && - git var GIT_COMMITTER_IDENT | - sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" ident ) >expected && test_cmp expected actual @@ -428,13 +428,14 @@ test_expect_success 'sign off (2)' ' git commit -s -m "thank you $existing" && - git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo thank you && echo && echo $existing && - git var GIT_COMMITTER_IDENT | - sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" ident ) >expected && test_cmp expected actual @@ -448,13 +449,14 @@ test_expect_success 'signoff gap' ' git commit -s -m "welcome $alt" && - git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo welcome && echo && echo $alt && - git var GIT_COMMITTER_IDENT | - sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" ident ) >expected && test_cmp expected actual ' @@ -468,15 +470,16 @@ test_expect_success 'signoff gap 2' ' We have now $alt" && - git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo welcome && echo && echo We have now && echo $alt && echo && - git var GIT_COMMITTER_IDENT | - sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" ident ) >expected && test_cmp expected actual ' @@ -489,7 +492,8 @@ test_expect_success 'signoff respects trailer config' ' non-trailer line Myfooter: x" && - git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo subject && echo && @@ -506,7 +510,8 @@ Myfooter: x" && non-trailer line Myfooter: x" && - git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo subject && echo && @@ -538,7 +543,8 @@ test_expect_success 'multiple -m' ' >negative && git add negative && git commit -m "one" -m "two" -m "three" && - git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo one && echo && @@ -555,23 +561,25 @@ test_expect_success 'amend commit to fix author' ' oldtick=$GIT_AUTHOR_DATE && test_tick && git reset --hard && - git cat-file -p HEAD | + git cat-file -p HEAD >commit && sed -e "s/author.*/author $author $oldtick/" \ - -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" > \ - expected && + -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" \ + commit >expected && git commit --amend --author="$author" && - git cat-file -p HEAD > current && + git cat-file -p HEAD >current && test_cmp expected current ' test_expect_success 'git commit <file> with dirty index' ' - echo tacocat > elif && - echo tehlulz > chz && + echo tacocat >elif && + echo tehlulz >chz && git add chz && git commit elif -m "tacocat is a palindrome" && - git show --stat | grep elif && - git diff --cached | grep chz + git show --stat >stat && + grep elif stat && + git diff --cached >diff && + grep chz diff ' test_expect_success 'same tree (single parent)' ' @@ -584,7 +592,8 @@ test_expect_success 'same tree (single parent)' ' test_expect_success 'same tree (single parent) --allow-empty' ' git commit --allow-empty -m "forced empty" && - git cat-file commit HEAD | grep forced + git cat-file commit HEAD >commit && + grep forced commit ' diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 4e676cdce8..8e969f3e36 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -1471,7 +1471,7 @@ test_expect_success '"status.branch=true" same as "-b"' ' test_expect_success '"status.branch=true" different from "--no-branch"' ' git status -s --no-branch >expected_nobranch && git -c status.branch=true status -s >actual && - test_must_fail test_cmp expected_nobranch actual + ! test_cmp expected_nobranch actual ' test_expect_success '"status.branch=true" weaker than "--no-branch"' ' @@ -1571,7 +1571,7 @@ test_expect_success '"status.showStash=true" weaker than "--no-show-stash"' ' test_cmp expected_without_stash actual ' -test_expect_success 'no additionnal info if no stash entries' ' +test_expect_success 'no additional info if no stash entries' ' git stash clear && git -c status.showStash=true status >actual && test_cmp expected_without_stash actual diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 682b23a068..6baaa1ad91 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -6,6 +6,11 @@ GNUPGHOME_NOT_USED=$GNUPGHOME . "$TEST_DIRECTORY/lib-gpg.sh" test_expect_success GPG 'create signed commits' ' + test_oid_cache <<-\EOF && + header sha1:gpgsig + header sha256:gpgsig-sha256 + EOF + test_when_finished "test_unconfig commit.gpgsign" && echo 1 >file && git add file && @@ -109,6 +114,21 @@ test_expect_success GPG 'verify-commit exits success on untrusted signature' ' grep "not certified" actual ' +test_expect_success GPG 'verify-commit exits success with matching minTrustLevel' ' + test_config gpg.minTrustLevel ultimate && + git verify-commit sixth-signed +' + +test_expect_success GPG 'verify-commit exits success with low minTrustLevel' ' + test_config gpg.minTrustLevel fully && + git verify-commit sixth-signed +' + +test_expect_success GPG 'verify-commit exits failure with high minTrustLevel' ' + test_config gpg.minTrustLevel ultimate && + test_must_fail git verify-commit eighth-signed-alt +' + test_expect_success GPG 'verify signatures with --raw' ' ( for commit in initial second merge fourth-signed fifth-signed sixth-signed seventh-signed @@ -140,6 +160,11 @@ test_expect_success GPG 'verify signatures with --raw' ' ) ' +test_expect_success GPG 'proper header is used for hash algorithm' ' + git cat-file commit fourth-signed >output && + grep "^$(test_oid header) -----BEGIN PGP SIGNATURE-----" output +' + test_expect_success GPG 'show signed commit with signature' ' git show -s initial >commit && git show -s --show-signature initial >show && @@ -147,7 +172,7 @@ test_expect_success GPG 'show signed commit with signature' ' git cat-file commit initial >cat && grep -v -e "gpg: " -e "Warning: " show >show.commit && grep -e "gpg: " -e "Warning: " show >show.gpg && - grep -v "^ " cat | grep -v "^gpgsig " >cat.commit && + grep -v "^ " cat | grep -v "^$(test_oid header) " >cat.commit && test_cmp show.commit commit && test_cmp show.gpg verify.2 && test_cmp cat.commit verify.1 @@ -219,6 +244,30 @@ test_expect_success GPG 'show untrusted signature with custom format' ' test_cmp expect actual ' +test_expect_success GPG 'show untrusted signature with undefined trust level' ' + cat >expect <<-\EOF && + undefined + 65A0EEA02E30CAD7 + Eris Discordia <discord@example.net> + F8364A59E07FFE9F4D63005A65A0EEA02E30CAD7 + D4BE22311AD3131E5EDA29A461092E85B7227189 + EOF + git log -1 --format="%GT%n%GK%n%GS%n%GF%n%GP" eighth-signed-alt >actual && + test_cmp expect actual +' + +test_expect_success GPG 'show untrusted signature with ultimate trust level' ' + cat >expect <<-\EOF && + ultimate + 13B6F51ECDDE430D + C O Mitter <committer@example.com> + 73D758744BE721698EC54E8713B6F51ECDDE430D + 73D758744BE721698EC54E8713B6F51ECDDE430D + EOF + git log -1 --format="%GT%n%GK%n%GS%n%GF%n%GP" sixth-signed >actual && + test_cmp expect actual +' + test_expect_success GPG 'show unknown signature with custom format' ' cat >expect <<-\EOF && E @@ -260,10 +309,10 @@ test_expect_success GPG 'check config gpg.format values' ' test_expect_success GPG 'detect fudged commit with double signature' ' sed -e "/gpgsig/,/END PGP/d" forged1 >double-base && sed -n -e "/gpgsig/,/END PGP/p" forged1 | \ - sed -e "s/^gpgsig//;s/^ //" | gpg --dearmor >double-sig1.sig && + sed -e "s/^$(test_oid header)//;s/^ //" | gpg --dearmor >double-sig1.sig && gpg -o double-sig2.sig -u 29472784 --detach-sign double-base && cat double-sig1.sig double-sig2.sig | gpg --enarmor >double-combined.asc && - sed -e "s/^\(-.*\)ARMORED FILE/\1SIGNATURE/;1s/^/gpgsig /;2,\$s/^/ /" \ + sed -e "s/^\(-.*\)ARMORED FILE/\1SIGNATURE/;1s/^/$(test_oid header) /;2,\$s/^/ /" \ double-combined.asc > double-gpgsig && sed -e "/committer/r double-gpgsig" double-base >double-commit && git hash-object -w -t commit double-commit >double-commit.commit && diff --git a/t/t7512-status-help.sh b/t/t7512-status-help.sh index 66d7a62797..29518e0949 100755 --- a/t/t7512-status-help.sh +++ b/t/t7512-status-help.sh @@ -71,10 +71,10 @@ test_expect_success 'prepare for rebase conflicts' ' ' -test_expect_success 'status when rebase in progress before resolving conflicts' ' +test_expect_success 'status when rebase --apply in progress before resolving conflicts' ' test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short HEAD^^) && - test_must_fail git rebase HEAD^ --onto HEAD^^ && + test_must_fail git rebase --apply HEAD^ --onto HEAD^^ && cat >expected <<EOF && rebase in progress; onto $ONTO You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''. @@ -94,11 +94,11 @@ EOF ' -test_expect_success 'status when rebase in progress before rebase --continue' ' +test_expect_success 'status when rebase --apply in progress before rebase --continue' ' git reset --hard rebase_conflicts && test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short HEAD^^) && - test_must_fail git rebase HEAD^ --onto HEAD^^ && + test_must_fail git rebase --apply HEAD^ --onto HEAD^^ && echo three >main.txt && git add main.txt && cat >expected <<EOF && @@ -688,7 +688,7 @@ EOF ' -test_expect_success 'status when rebase conflicts with statushints disabled' ' +test_expect_success 'status when rebase --apply conflicts with statushints disabled' ' git reset --hard master && git checkout -b statushints_disabled && test_when_finished "git config --local advice.statushints true" && @@ -698,7 +698,7 @@ test_expect_success 'status when rebase conflicts with statushints disabled' ' test_commit three_statushints main.txt three && test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short HEAD^^) && - test_must_fail git rebase HEAD^ --onto HEAD^^ && + test_must_fail git rebase --apply HEAD^ --onto HEAD^^ && cat >expected <<EOF && rebase in progress; onto $ONTO You are currently rebasing branch '\''statushints_disabled'\'' on '\''$ONTO'\''. diff --git a/t/t7513-interpret-trailers.sh b/t/t7513-interpret-trailers.sh index f19202b509..6602790b5f 100755 --- a/t/t7513-interpret-trailers.sh +++ b/t/t7513-interpret-trailers.sh @@ -1234,7 +1234,7 @@ test_expect_success 'with simple command' ' test_cmp expected actual ' -test_expect_success 'with command using commiter information' ' +test_expect_success 'with command using committer information' ' git config trailer.sign.ifExists "addIfDifferent" && git config trailer.sign.command "echo \"\$GIT_COMMITTER_NAME <\$GIT_COMMITTER_EMAIL>\"" && cat complex_message_body >expected && diff --git a/t/t7519-status-fsmonitor.sh b/t/t7519-status-fsmonitor.sh index 997d5fb349..fbfdcca000 100755 --- a/t/t7519-status-fsmonitor.sh +++ b/t/t7519-status-fsmonitor.sh @@ -32,11 +32,12 @@ write_integration_script () { echo "$0: exactly 2 arguments expected" exit 2 fi - if test "$1" != 1 + if test "$1" != 2 then echo "Unsupported core.fsmonitor hook version." >&2 exit 1 fi + printf "last_update_token\0" printf "untracked\0" printf "dir1/untracked\0" printf "dir2/untracked\0" @@ -106,6 +107,9 @@ EOF # test that "update-index --fsmonitor-valid" sets the fsmonitor valid bit test_expect_success 'update-index --fsmonitor-valid" sets the fsmonitor valid bit' ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "last_update_token\0" + EOF git update-index --fsmonitor && git update-index --fsmonitor-valid dir1/modified && git update-index --fsmonitor-valid dir2/modified && @@ -164,6 +168,9 @@ EOF # test that newly added files are marked valid test_expect_success 'newly added files are marked valid' ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "last_update_token\0" + EOF git add new && git add dir1/new && git add dir2/new && @@ -203,6 +210,7 @@ EOF # test that *only* files returned by the integration script get flagged as invalid test_expect_success '*only* files returned by the integration script get flagged as invalid' ' write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "last_update_token\0" printf "dir1/modified\0" EOF clean_repo && @@ -218,11 +226,12 @@ test_expect_success '*only* files returned by the integration script get flagged # Ensure commands that call refresh_index() to move the index back in time # properly invalidate the fsmonitor cache test_expect_success 'refresh_index() invalidates fsmonitor cache' ' - write_script .git/hooks/fsmonitor-test<<-\EOF && - EOF clean_repo && dirty_repo && + write_integration_script && git add . && + write_script .git/hooks/fsmonitor-test<<-\EOF && + EOF git commit -m "to reset" && git reset HEAD~1 && git status >actual && @@ -271,6 +280,7 @@ do # (if enabled) files unless it is told about them. test_expect_success "status doesn't detect unreported modifications" ' write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "last_update_token\0" :>marker EOF clean_repo && @@ -294,7 +304,7 @@ do done done -# test that splitting the index dosn't interfere +# test that splitting the index doesn't interfere test_expect_success 'splitting the index results in the same state' ' write_integration_script && dirty_repo && diff --git a/t/t7519/fsmonitor-all b/t/t7519/fsmonitor-all index 691bc94dc2..94ab66bd3d 100755 --- a/t/t7519/fsmonitor-all +++ b/t/t7519/fsmonitor-all @@ -17,7 +17,6 @@ fi if test "$1" != 1 then - echo "Unsupported core.fsmonitor hook version." >&2 exit 1 fi diff --git a/t/t7519/fsmonitor-all-v2 b/t/t7519/fsmonitor-all-v2 new file mode 100755 index 0000000000..061907e88b --- /dev/null +++ b/t/t7519/fsmonitor-all-v2 @@ -0,0 +1,21 @@ +#!/usr/bin/perl + +use strict; +use warnings; +# +# An test hook script to integrate with git to test fsmonitor. +# +# The hook is passed a version (currently 2) and since token +# formatted as a string and outputs to stdout all files that have been +# modified since the given time. Paths must be relative to the root of +# the working tree and separated by a single NUL. +# +#echo "$0 $*" >&2 +my ($version, $last_update_token) = @ARGV; + +if ($version ne 2) { + print "Unsupported query-fsmonitor hook version '$version'.\n"; + exit 1; +} + +print "last_update_token\0/\0" diff --git a/t/t7519/fsmonitor-watchman b/t/t7519/fsmonitor-watchman index 5514edcf68..264b9daf83 100755 --- a/t/t7519/fsmonitor-watchman +++ b/t/t7519/fsmonitor-watchman @@ -23,10 +23,10 @@ my ($version, $time) = @ARGV; if ($version == 1) { # convert nanoseconds to seconds - $time = int $time / 1000000000; + # subtract one second to make sure watchman will return all changes + $time = int ($time / 1000000000) - 1; } else { - die "Unsupported query-fsmonitor hook version '$version'.\n" . - "Falling back to scanning...\n"; + exit 1; } my $git_work_tree; @@ -54,18 +54,12 @@ sub launch_watchman { # # To accomplish this, we're using the "since" generator to use the # recency index to select candidate nodes and "fields" to limit the - # output to file names only. Then we're using the "expression" term to - # further constrain the results. - # - # The category of transient files that we want to ignore will have a - # creation clock (cclock) newer than $time_t value and will also not - # currently exist. + # output to file names only. my $query = <<" END"; ["query", "$git_work_tree", { "since": $time, - "fields": ["name"], - "expression": ["not", ["allof", ["since", $time, "cclock"], ["not", "exists"]]] + "fields": ["name"] }] END diff --git a/t/t7519/fsmonitor-watchman-v2 b/t/t7519/fsmonitor-watchman-v2 new file mode 100755 index 0000000000..14ed0aa42d --- /dev/null +++ b/t/t7519/fsmonitor-watchman-v2 @@ -0,0 +1,173 @@ +#!/usr/bin/perl + +use strict; +use warnings; +use IPC::Open2; + +# An example hook script to integrate Watchman +# (https://facebook.github.io/watchman/) with git to speed up detecting +# new and modified files. +# +# The hook is passed a version (currently 2) and last update token +# formatted as a string and outputs to stdout a new update token and +# all files that have been modified since the update token. Paths must +# be relative to the root of the working tree and separated by a single NUL. +# +# To enable this hook, rename this file to "query-watchman" and set +# 'git config core.fsmonitor .git/hooks/query-watchman' +# +my ($version, $last_update_token) = @ARGV; + +# Uncomment for debugging +# print STDERR "$0 $version $last_update_token\n"; + +# Check the hook interface version +if ($version ne 2) { + die "Unsupported query-fsmonitor hook version '$version'.\n" . + "Falling back to scanning...\n"; +} + +my $git_work_tree = get_working_dir(); + +my $retry = 1; + +my $json_pkg; +eval { + require JSON::XS; + $json_pkg = "JSON::XS"; + 1; +} or do { + require JSON::PP; + $json_pkg = "JSON::PP"; +}; + +launch_watchman(); + +sub launch_watchman { + my $o = watchman_query(); + if (is_work_tree_watched($o)) { + output_result($o->{clock}, @{$o->{files}}); + } +} + +sub output_result { + my ($clockid, @files) = @_; + + # Uncomment for debugging watchman output + # open (my $fh, ">", ".git/watchman-output.out"); + # binmode $fh, ":utf8"; + # print $fh "$clockid\n@files\n"; + # close $fh; + + binmode STDOUT, ":utf8"; + print $clockid; + print "\0"; + local $, = "\0"; + print @files; +} + +sub watchman_clock { + my $response = qx/watchman clock "$git_work_tree"/; + die "Failed to get clock id on '$git_work_tree'.\n" . + "Falling back to scanning...\n" if $? != 0; + + return $json_pkg->new->utf8->decode($response); +} + +sub watchman_query { + my $pid = open2(\*CHLD_OUT, \*CHLD_IN, 'watchman -j --no-pretty') + or die "open2() failed: $!\n" . + "Falling back to scanning...\n"; + + # In the query expression below we're asking for names of files that + # changed since $last_update_token but not from the .git folder. + # + # To accomplish this, we're using the "since" generator to use the + # recency index to select candidate nodes and "fields" to limit the + # output to file names only. Then we're using the "expression" term to + # further constrain the results. + if (substr($last_update_token, 0, 1) eq "c") { + $last_update_token = "\"$last_update_token\""; + } + my $query = <<" END"; + ["query", "$git_work_tree", { + "since": $last_update_token, + "fields": ["name"], + "expression": ["not", ["dirname", ".git"]] + }] + END + + # Uncomment for debugging the watchman query + # open (my $fh, ">", ".git/watchman-query.json"); + # print $fh $query; + # close $fh; + + print CHLD_IN $query; + close CHLD_IN; + my $response = do {local $/; <CHLD_OUT>}; + + # Uncomment for debugging the watch response + # open ($fh, ">", ".git/watchman-response.json"); + # print $fh $response; + # close $fh; + + die "Watchman: command returned no output.\n" . + "Falling back to scanning...\n" if $response eq ""; + die "Watchman: command returned invalid output: $response\n" . + "Falling back to scanning...\n" unless $response =~ /^\{/; + + return $json_pkg->new->utf8->decode($response); +} + +sub is_work_tree_watched { + my ($output) = @_; + my $error = $output->{error}; + if ($retry > 0 and $error and $error =~ m/unable to resolve root .* directory (.*) is not watched/) { + $retry--; + my $response = qx/watchman watch "$git_work_tree"/; + die "Failed to make watchman watch '$git_work_tree'.\n" . + "Falling back to scanning...\n" if $? != 0; + $output = $json_pkg->new->utf8->decode($response); + $error = $output->{error}; + die "Watchman: $error.\n" . + "Falling back to scanning...\n" if $error; + + # Uncomment for debugging watchman output + # open (my $fh, ">", ".git/watchman-output.out"); + # close $fh; + + # Watchman will always return all files on the first query so + # return the fast "everything is dirty" flag to git and do the + # Watchman query just to get it over with now so we won't pay + # the cost in git to look up each individual file. + my $o = watchman_clock(); + $error = $output->{error}; + + die "Watchman: $error.\n" . + "Falling back to scanning...\n" if $error; + + output_result($o->{clock}, ("/")); + $last_update_token = $o->{clock}; + + eval { launch_watchman() }; + return 0; + } + + die "Watchman: $error.\n" . + "Falling back to scanning...\n" if $error; + + return 1; +} + +sub get_working_dir { + my $working_dir; + if ($^O =~ 'msys' || $^O =~ 'cygwin') { + $working_dir = Win32::GetCwd(); + $working_dir =~ tr/\\/\//; + } else { + require Cwd; + $working_dir = Cwd::cwd(); + } + + return $working_dir; +} diff --git a/t/t7526-commit-pathspec-file.sh b/t/t7526-commit-pathspec-file.sh new file mode 100755 index 0000000000..5fbe47ebcd --- /dev/null +++ b/t/t7526-commit-pathspec-file.sh @@ -0,0 +1,164 @@ +#!/bin/sh + +test_description='commit --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + test_commit file0 && + git tag checkpoint && + + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t +' + +restore_checkpoint () { + git reset --soft checkpoint +} + +verify_expect () { + git diff-tree --no-commit-id --name-status -r HEAD >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + echo fileA.t | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + echo fileA.t >list && + git commit --pathspec-from-file=list -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + printf "fileA.t\0fileB.t\0" | git commit --pathspec-from-file=- --pathspec-file-nul -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t\n" | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t" | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + printf "fileA.t\r\nfileB.t\r\n" | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git commit --pathspec-from-file=list -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + test_must_fail git commit --pathspec-from-file=list --pathspec-file-nul -m "Commit" +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + printf "fileB.t\nfileC.t\n" | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileB.t + A fileC.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + >empty_list && + + test_must_fail git commit --pathspec-from-file=list --interactive -m "Commit" 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --interactive/--patch" err && + + test_must_fail git commit --pathspec-from-file=list --patch -m "Commit" 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --interactive/--patch" err && + + test_must_fail git commit --pathspec-from-file=list --all -m "Commit" 2>err && + test_i18ngrep -e "--pathspec-from-file with -a does not make sense" err && + + test_must_fail git commit --pathspec-from-file=list -m "Commit" -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git commit --pathspec-file-nul -m "Commit" 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + test_must_fail git commit --pathspec-from-file=empty_list --include -m "Commit" 2>err && + test_i18ngrep -e "No paths with --include/--only does not make sense." err && + + test_must_fail git commit --pathspec-from-file=empty_list --only -m "Commit" 2>err && + test_i18ngrep -e "No paths with --include/--only does not make sense." err +' + +test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index 132608879a..5883a6adc3 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -29,15 +29,19 @@ Testing basic merge operations/option parsing. . ./test-lib.sh . "$TEST_DIRECTORY"/lib-gpg.sh -printf '%s\n' 1 2 3 4 5 6 7 8 9 >file -printf '%s\n' '1 X' 2 3 4 5 6 7 8 9 >file.1 -printf '%s\n' 1 2 3 4 '5 X' 6 7 8 9 >file.5 -printf '%s\n' 1 2 3 4 5 6 7 8 '9 X' >file.9 -printf '%s\n' 1 2 3 4 5 6 7 8 '9 Y' >file.9y -printf '%s\n' '1 X' 2 3 4 5 6 7 8 9 >result.1 -printf '%s\n' '1 X' 2 3 4 '5 X' 6 7 8 9 >result.1-5 -printf '%s\n' '1 X' 2 3 4 '5 X' 6 7 8 '9 X' >result.1-5-9 -printf '%s\n' 1 2 3 4 5 6 7 8 '9 Z' >result.9z +test_write_lines 1 2 3 4 5 6 7 8 9 >file +cp file file.orig +test_write_lines '1 X' 2 3 4 5 6 7 8 9 >file.1 +test_write_lines 1 2 '3 X' 4 5 6 7 8 9 >file.3 +test_write_lines 1 2 3 4 '5 X' 6 7 8 9 >file.5 +test_write_lines 1 2 3 4 5 6 7 8 '9 X' >file.9 +test_write_lines 1 2 3 4 5 6 7 8 '9 Y' >file.9y +test_write_lines '1 X' 2 3 4 5 6 7 8 9 >result.1 +test_write_lines '1 X' 2 3 4 '5 X' 6 7 8 9 >result.1-5 +test_write_lines '1 X' 2 3 4 5 6 7 8 '9 X' >result.1-9 +test_write_lines '1 X' 2 3 4 '5 X' 6 7 8 '9 X' >result.1-5-9 +test_write_lines '1 X' 2 '3 X' 4 '5 X' 6 7 8 '9 X' >result.1-3-5-9 +test_write_lines 1 2 3 4 5 6 7 8 '9 Z' >result.9z create_merge_msgs () { echo "Merge tag 'c2'" >msg.1-5 && @@ -81,7 +85,7 @@ verify_head () { } verify_parents () { - printf '%s\n' "$@" >parents.expected && + test_write_lines "$@" >parents.expected && >parents.actual && i=1 && while test $i -le $# @@ -95,7 +99,7 @@ verify_parents () { } verify_mergeheads () { - printf '%s\n' "$@" >mergehead.expected && + test_write_lines "$@" >mergehead.expected && while read sha1 rest do git rev-parse $sha1 @@ -675,6 +679,134 @@ test_expect_success 'refresh the index before merging' ' git merge c3 ' +test_expect_success 'merge with --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git merge --autostash c2 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5 merge-result && + test_cmp result.1-5-9 file +' + +test_expect_success 'merge with merge.autoStash' ' + test_config merge.autoStash true && + git reset --hard c1 && + git merge-file file file.orig file.9 && + git merge c2 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5 merge-result && + test_cmp result.1-5-9 file +' + +test_expect_success 'fast-forward merge with --autostash' ' + git reset --hard c0 && + git merge-file file file.orig file.5 && + git merge --autostash c1 2>err && + test_i18ngrep "Applied autostash." err && + test_cmp result.1-5 file +' + +test_expect_success 'octopus merge with --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.3 && + git merge --autostash c2 c3 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5-9 merge-result && + test_cmp result.1-3-5-9 file +' + +test_expect_success 'conflicted merge with --autostash, --abort restores stash' ' + git reset --hard c3 && + cp file.1 file && + test_must_fail git merge --autostash c7 && + git merge --abort 2>err && + test_i18ngrep "Applied autostash." err && + test_cmp file.1 file +' + +test_expect_success 'completed merge (git commit) with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git commit 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5 merge-result && + test_cmp result.1-5-9 file +' + +test_expect_success 'completed merge (git merge --continue) with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git merge --continue 2>err && + test_i18ngrep "Applied autostash." err && + git show HEAD:file >merge-result && + test_cmp result.1-5 merge-result && + test_cmp result.1-5-9 file +' + +test_expect_success 'aborted merge (merge --abort) with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git merge --abort 2>err && + test_i18ngrep "Applied autostash." err && + git diff >actual && + test_cmp expect actual +' + +test_expect_success 'aborted merge (reset --hard) with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git reset --hard 2>err && + test_i18ngrep "Autostash exists; creating a new stash entry." err && + git diff --exit-code +' + +test_expect_success 'quit merge with --no-commit and --autostash' ' + git reset --hard c1 && + git merge-file file file.orig file.9 && + git diff >expect && + git merge --no-commit --autostash c2 && + git stash show -p MERGE_AUTOSTASH >actual && + test_cmp expect actual && + git diff HEAD >expect && + git merge --quit 2>err && + test_i18ngrep "Autostash exists; creating a new stash entry." err && + git diff HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'merge with conflicted --autostash changes' ' + git reset --hard c1 && + git merge-file file file.orig file.9y && + git diff >expect && + test_when_finished "test_might_fail git stash drop" && + git merge --autostash c3 2>err && + test_i18ngrep "Applying autostash resulted in conflicts." err && + git show HEAD:file >merge-result && + test_cmp result.1-9 merge-result && + git stash show -p >actual && + test_cmp expect actual +' + cat >expected.branch <<\EOF Merge branch 'c5-branch' (early part) EOF diff --git a/t/t7601-merge-pull-config.sh b/t/t7601-merge-pull-config.sh index c6c44ec570..0f97828cd0 100755 --- a/t/t7601-merge-pull-config.sh +++ b/t/t7601-merge-pull-config.sh @@ -27,6 +27,44 @@ test_expect_success 'setup' ' git tag c3 ' +test_expect_success 'pull.rebase not set' ' + git reset --hard c0 && + git pull . c1 2>err && + test_i18ngrep "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and pull.ff=false' ' + git reset --hard c0 && + test_config pull.ff false && + git pull . c1 2>err && + test_i18ngrep "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and pull.ff=only' ' + git reset --hard c0 && + test_config pull.ff only && + git pull . c1 2>err && + test_i18ngrep ! "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and --rebase given' ' + git reset --hard c0 && + git pull --rebase . c1 2>err && + test_i18ngrep ! "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and --no-rebase given' ' + git reset --hard c0 && + git pull --no-rebase . c1 2>err && + test_i18ngrep ! "Pulling without specifying how to reconcile" err +' + +test_expect_success 'pull.rebase not set and --ff-only given' ' + git reset --hard c0 && + git pull --ff-only . c1 2>err && + test_i18ngrep ! "Pulling without specifying how to reconcile" err +' + test_expect_success 'merge c1 with c2' ' git reset --hard c1 && test -f c0.c && diff --git a/t/t7609-merge-co-error-msgs.sh b/t/t7609-merge-co-error-msgs.sh index e90413204e..5c8894d94f 100755 --- a/t/t7609-merge-co-error-msgs.sh +++ b/t/t7609-merge-co-error-msgs.sh @@ -126,7 +126,7 @@ test_expect_success 'not_uptodate_dir porcelain checkout error' ' git rm rep2 -r && >rep && >rep2 && - git add rep rep2&& + git add rep rep2 && git commit -m "added test as a file" && git checkout master && >rep/untracked-file && diff --git a/t/t7612-merge-verify-signatures.sh b/t/t7612-merge-verify-signatures.sh index d99218a725..a426f3a89a 100755 --- a/t/t7612-merge-verify-signatures.sh +++ b/t/t7612-merge-verify-signatures.sh @@ -66,6 +66,20 @@ test_expect_success GPG 'merge commit with untrusted signature with verification test_i18ngrep "has an untrusted GPG signature" mergeerror ' +test_expect_success GPG 'merge commit with untrusted signature with verification and high minTrustLevel' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel marginal && + test_must_fail git merge --ff-only --verify-signatures side-untrusted 2>mergeerror && + test_i18ngrep "has an untrusted GPG signature" mergeerror +' + +test_expect_success GPG 'merge commit with untrusted signature with verification and low minTrustLevel' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel undefined && + git merge --ff-only --verify-signatures side-untrusted >mergeoutput && + test_i18ngrep "has a good GPG signature" mergeoutput +' + test_expect_success GPG 'merge commit with untrusted signature with merge.verifySignatures=true' ' test_when_finished "git reset --hard && git checkout initial" && test_config merge.verifySignatures true && @@ -73,6 +87,14 @@ test_expect_success GPG 'merge commit with untrusted signature with merge.verify test_i18ngrep "has an untrusted GPG signature" mergeerror ' +test_expect_success GPG 'merge commit with untrusted signature with merge.verifySignatures=true and minTrustLevel' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config merge.verifySignatures true && + test_config gpg.minTrustLevel marginal && + test_must_fail git merge --ff-only side-untrusted 2>mergeerror && + test_i18ngrep "has an untrusted GPG signature" mergeerror +' + test_expect_success GPG 'merge signed commit with verification' ' test_when_finished "git reset --hard && git checkout initial" && git merge --verbose --ff-only --verify-signatures side-signed >mergeoutput && diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 4e855bc21b..25b235c063 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -4,129 +4,104 @@ test_description='git repack works correctly' . ./test-lib.sh -commit_and_pack() { - test_commit "$@" >/dev/null && - SHA1=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) && - echo pack-${SHA1}.pack +commit_and_pack () { + test_commit "$@" 1>&2 && + incrpackid=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) && + echo pack-${incrpackid}.pack +} + +test_no_missing_in_packs () { + myidx=$(ls -1 .git/objects/pack/*.idx) && + test_path_is_file "$myidx" && + git verify-pack -v alt_objects/pack/*.idx >orig.raw && + sed -n -e "s/^\($OID_REGEX\).*/\1/p" orig.raw | sort >orig && + git verify-pack -v $myidx >dest.raw && + cut -d" " -f1 dest.raw | sort >dest && + comm -23 orig dest >missing && + test_must_be_empty missing +} + +# we expect $packid and $oid to be defined +test_has_duplicate_object () { + want_duplicate_object="$1" + found_duplicate_object=false + for p in .git/objects/pack/*.idx + do + idx=$(basename $p) + test "pack-$packid.idx" = "$idx" && continue + git verify-pack -v $p >packlist || return $? + if grep "^$oid" packlist + then + found_duplicate_object=true + echo "DUPLICATE OBJECT FOUND" + break + fi + done && + test "$want_duplicate_object" = "$found_duplicate_object" } test_expect_success 'objects in packs marked .keep are not repacked' ' - echo content1 > file1 && - echo content2 > file2 && + echo content1 >file1 && + echo content2 >file2 && git add . && test_tick && git commit -m initial_commit && # Create two packs # The first pack will contain all of the objects except one - git rev-list --objects --all | grep -v file2 | - git pack-objects pack > /dev/null && + git rev-list --objects --all >objs && + grep -v file2 objs | git pack-objects pack && # The second pack will contain the excluded object - packsha1=$(git rev-list --objects --all | grep file2 | - git pack-objects pack) && - >pack-$packsha1.keep && - objsha1=$(git verify-pack -v pack-$packsha1.idx | head -n 1 | - sed -e "s/^\([0-9a-f]\{40\}\).*/\1/") && + packid=$(grep file2 objs | git pack-objects pack) && + >pack-$packid.keep && + git verify-pack -v pack-$packid.idx >packlist && + oid=$(head -n 1 packlist | sed -e "s/^\($OID_REGEX\).*/\1/") && mv pack-* .git/objects/pack/ && git repack -A -d -l && git prune-packed && - for p in .git/objects/pack/*.idx; do - idx=$(basename $p) - test "pack-$packsha1.idx" = "$idx" && continue - if git verify-pack -v $p | egrep "^$objsha1"; then - found_duplicate_object=1 - echo "DUPLICATE OBJECT FOUND" - break - fi - done && - test -z "$found_duplicate_object" + test_has_duplicate_object false ' test_expect_success 'writing bitmaps via command-line can duplicate .keep objects' ' - # build on $objsha1, $packsha1, and .keep state from previous + # build on $oid, $packid, and .keep state from previous git repack -Adbl && - test_when_finished "found_duplicate_object=" && - for p in .git/objects/pack/*.idx; do - idx=$(basename $p) - test "pack-$packsha1.idx" = "$idx" && continue - if git verify-pack -v $p | egrep "^$objsha1"; then - found_duplicate_object=1 - echo "DUPLICATE OBJECT FOUND" - break - fi - done && - test "$found_duplicate_object" = 1 + test_has_duplicate_object true ' test_expect_success 'writing bitmaps via config can duplicate .keep objects' ' - # build on $objsha1, $packsha1, and .keep state from previous + # build on $oid, $packid, and .keep state from previous git -c repack.writebitmaps=true repack -Adl && - test_when_finished "found_duplicate_object=" && - for p in .git/objects/pack/*.idx; do - idx=$(basename $p) - test "pack-$packsha1.idx" = "$idx" && continue - if git verify-pack -v $p | egrep "^$objsha1"; then - found_duplicate_object=1 - echo "DUPLICATE OBJECT FOUND" - break - fi - done && - test "$found_duplicate_object" = 1 + test_has_duplicate_object true ' test_expect_success 'loose objects in alternate ODB are not repacked' ' mkdir alt_objects && - echo $(pwd)/alt_objects > .git/objects/info/alternates && - echo content3 > file3 && - objsha1=$(GIT_OBJECT_DIRECTORY=alt_objects git hash-object -w file3) && + echo $(pwd)/alt_objects >.git/objects/info/alternates && + echo content3 >file3 && + oid=$(GIT_OBJECT_DIRECTORY=alt_objects git hash-object -w file3) && git add file3 && test_tick && git commit -m commit_file3 && git repack -a -d -l && git prune-packed && - for p in .git/objects/pack/*.idx; do - if git verify-pack -v $p | egrep "^$objsha1"; then - found_duplicate_object=1 - echo "DUPLICATE OBJECT FOUND" - break - fi - done && - test -z "$found_duplicate_object" + test_has_duplicate_object false ' test_expect_success 'packed obs in alt ODB are repacked even when local repo is packless' ' mkdir alt_objects/pack && mv .git/objects/pack/* alt_objects/pack && git repack -a && - myidx=$(ls -1 .git/objects/pack/*.idx) && - test -f "$myidx" && - for p in alt_objects/pack/*.idx; do - git verify-pack -v $p | sed -n -e "/^[0-9a-f]\{40\}/p" - done | while read sha1 rest; do - if ! ( git verify-pack -v $myidx | grep "^$sha1" ); then - echo "Missing object in local pack: $sha1" - return 1 - fi - done + test_no_missing_in_packs ' test_expect_success 'packed obs in alt ODB are repacked when local repo has packs' ' rm -f .git/objects/pack/* && - echo new_content >> file1 && + echo new_content >>file1 && git add file1 && test_tick && git commit -m more_content && git repack && git repack -a -d && - myidx=$(ls -1 .git/objects/pack/*.idx) && - test -f "$myidx" && - for p in alt_objects/pack/*.idx; do - git verify-pack -v $p | sed -n -e "/^[0-9a-f]\{40\}/p" - done | while read sha1 rest; do - if ! ( git verify-pack -v $myidx | grep "^$sha1" ); then - echo "Missing object in local pack: $sha1" - return 1 - fi - done + test_no_missing_in_packs ' test_expect_success 'packed obs in alternate ODB kept pack are repacked' ' @@ -134,7 +109,7 @@ test_expect_success 'packed obs in alternate ODB kept pack are repacked' ' for p in alt_objects/pack/*.pack do base_name=$(basename $p .pack) && - if test -f alt_objects/pack/$base_name.keep + if test_path_is_file alt_objects/pack/$base_name.keep then rm alt_objects/pack/$base_name.keep else @@ -142,22 +117,13 @@ test_expect_success 'packed obs in alternate ODB kept pack are repacked' ' fi done && git repack -a -d && - myidx=$(ls -1 .git/objects/pack/*.idx) && - test -f "$myidx" && - for p in alt_objects/pack/*.idx; do - git verify-pack -v $p | sed -n -e "/^[0-9a-f]\{40\}/p" - done | while read sha1 rest; do - if ! ( git verify-pack -v $myidx | grep "^$sha1" ); then - echo "Missing object in local pack: $sha1" - return 1 - fi - done + test_no_missing_in_packs ' test_expect_success 'packed unreachable obs in alternate ODB are not loosened' ' rm -f alt_objects/pack/*.keep && mv .git/objects/pack/* alt_objects/pack/ && - csha1=$(git rev-parse HEAD^{commit}) && + coid=$(git rev-parse HEAD^{commit}) && git reset --hard HEAD^ && test_tick && git reflog expire --expire=$test_tick --expire-unreachable=$test_tick --all && @@ -167,15 +133,15 @@ test_expect_success 'packed unreachable obs in alternate ODB are not loosened' ' --unpack-unreachable </dev/null pack && rm -f .git/objects/pack/* && mv pack-* .git/objects/pack/ && - test 0 = $(git verify-pack -v -- .git/objects/pack/*.idx | - egrep "^$csha1 " | sort | uniq | wc -l) && - echo > .git/objects/info/alternates && - test_must_fail git show $csha1 + git verify-pack -v -- .git/objects/pack/*.idx >packlist && + ! grep "^$coid " packlist && + echo >.git/objects/info/alternates && + test_must_fail git show $coid ' test_expect_success 'local packed unreachable obs that exist in alternate ODB are not loosened' ' - echo $(pwd)/alt_objects > .git/objects/info/alternates && - echo "$csha1" | git pack-objects --non-empty --all --reflog pack && + echo $(pwd)/alt_objects >.git/objects/info/alternates && + echo "$coid" | git pack-objects --non-empty --all --reflog pack && rm -f .git/objects/pack/* && mv pack-* .git/objects/pack/ && # The pack-objects call on the next line is equivalent to @@ -184,10 +150,10 @@ test_expect_success 'local packed unreachable obs that exist in alternate ODB ar --unpack-unreachable </dev/null pack && rm -f .git/objects/pack/* && mv pack-* .git/objects/pack/ && - test 0 = $(git verify-pack -v -- .git/objects/pack/*.idx | - egrep "^$csha1 " | sort | uniq | wc -l) && - echo > .git/objects/info/alternates && - test_must_fail git show $csha1 + git verify-pack -v -- .git/objects/pack/*.idx >packlist && + ! grep "^$coid " && + echo >.git/objects/info/alternates && + test_must_fail git show $coid ' test_expect_success 'objects made unreachable by grafts only are kept' ' @@ -196,7 +162,7 @@ test_expect_success 'objects made unreachable by grafts only are kept' ' H0=$(git rev-parse HEAD) && H1=$(git rev-parse HEAD^) && H2=$(git rev-parse HEAD^^) && - echo "$H0 $H2" > .git/info/grafts && + echo "$H0 $H2" >.git/info/grafts && git reflog expire --expire=$test_tick --expire-unreachable=$test_tick --all && git repack -a -d && git cat-file -t $H1 @@ -235,7 +201,7 @@ test_expect_success 'incremental repack does not complain' ' test_expect_success 'bitmaps can be disabled on bare repos' ' git -c repack.writeBitmaps=false -C bare.git repack -ad && - bitmap=$(ls bare.git/objects/pack/*.bitmap 2>/dev/null || :) && + bitmap=$(ls bare.git/objects/pack/*.bitmap || :) && test -z "$bitmap" ' diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 6bac9ed180..29b92907e2 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -125,15 +125,14 @@ test_expect_success 'difftool stops on error with --trust-exit-code' ' test_when_finished "rm -f for-diff .git/fail-right-file" && test_when_finished "git reset -- for-diff" && write_script .git/fail-right-file <<-\EOF && - echo "$2" + echo failed exit 1 EOF >for-diff && git add for-diff && - echo file >expect && test_must_fail git difftool -y --trust-exit-code \ --extcmd .git/fail-right-file branch >actual && - test_cmp expect actual + test_line_count = 1 actual ' test_expect_success 'difftool honors exit status if command not found' ' diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 7d7b396c23..991d5bd9c0 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -72,6 +72,11 @@ test_expect_success setup ' # Still a no-op. function dummy() {} EOF + if test_have_prereq FUNNYNAMES + then + echo unusual >"\"unusual\" pathname" && + echo unusual >"t/nested \"unusual\" pathname" + fi && git add . && test_tick && git commit -m initial @@ -481,6 +486,48 @@ do git grep --count -h -e b $H -- ab >actual && test_cmp expected actual ' + + test_expect_success FUNNYNAMES "grep $L should quote unusual pathnames" ' + cat >expected <<-EOF && + ${HC}"\"unusual\" pathname":unusual + ${HC}"t/nested \"unusual\" pathname":unusual + EOF + git grep unusual $H >actual && + test_cmp expected actual + ' + + test_expect_success FUNNYNAMES "grep $L in subdir should quote unusual relative pathnames" ' + cat >expected <<-EOF && + ${HC}"nested \"unusual\" pathname":unusual + EOF + ( + cd t && + git grep unusual $H + ) >actual && + test_cmp expected actual + ' + + test_expect_success FUNNYNAMES "grep -z $L with unusual pathnames" ' + cat >expected <<-EOF && + ${HC}"unusual" pathname:unusual + ${HC}t/nested "unusual" pathname:unusual + EOF + git grep -z unusual $H >actual && + tr "\0" ":" <actual >actual-replace-null && + test_cmp expected actual-replace-null + ' + + test_expect_success FUNNYNAMES "grep -z $L in subdir with unusual relative pathnames" ' + cat >expected <<-EOF && + ${HC}nested "unusual" pathname:unusual + EOF + ( + cd t && + git grep -z unusual $H + ) >actual && + tr "\0" ":" <actual >actual-replace-null && + test_cmp expected actual-replace-null + ' done cat >expected <<EOF diff --git a/t/t7811-grep-open.sh b/t/t7811-grep-open.sh index d1ebfd88c7..a98785da79 100755 --- a/t/t7811-grep-open.sh +++ b/t/t7811-grep-open.sh @@ -113,7 +113,6 @@ test_expect_success 'modified file' ' subdir/grep.c unrelated EOF - >empty && echo "enum grep_pat_token" >unrelated && test_when_finished "git checkout HEAD unrelated" && diff --git a/t/t7812-grep-icase-non-ascii.sh b/t/t7812-grep-icase-non-ascii.sh index 531eb59d57..03dba6685a 100755 --- a/t/t7812-grep-icase-non-ascii.sh +++ b/t/t7812-grep-icase-non-ascii.sh @@ -70,15 +70,18 @@ test_expect_success GETTEXT_LOCALE,LIBPCRE2 'PCRE v2: grep ASCII from invalid UT test_expect_success GETTEXT_LOCALE,LIBPCRE2 'PCRE v2: grep non-ASCII from invalid UTF-8 data' ' git grep -h "æ" invalid-0x80 >actual && test_cmp expected actual && - git grep -h "(*NO_JIT)æ" invalid-0x80 && + git grep -h "(*NO_JIT)æ" invalid-0x80 >actual && test_cmp expected actual ' test_expect_success GETTEXT_LOCALE,LIBPCRE2 'PCRE v2: grep non-ASCII from invalid UTF-8 data with -i' ' test_might_fail git grep -hi "Æ" invalid-0x80 >actual && - test_cmp expected actual && - test_must_fail git grep -hi "(*NO_JIT)Æ" invalid-0x80 && - test_cmp expected actual + if test -s actual + then + test_cmp expected actual + fi && + test_must_fail git grep -hi "(*NO_JIT)Æ" invalid-0x80 >actual && + ! test_cmp expected actual ' test_done diff --git a/t/t7814-grep-recurse-submodules.sh b/t/t7814-grep-recurse-submodules.sh index 946f91fa57..828cb3ba58 100755 --- a/t/t7814-grep-recurse-submodules.sh +++ b/t/t7814-grep-recurse-submodules.sh @@ -345,7 +345,16 @@ test_incompatible_with_recurse_submodules () } test_incompatible_with_recurse_submodules --untracked -test_incompatible_with_recurse_submodules --no-index + +test_expect_success 'grep --recurse-submodules --no-index ignores --recurse-submodules' ' + git grep --recurse-submodules --no-index -e "^(.|.)[\d]" >actual && + cat >expect <<-\EOF && + a:(1|2)d(3|4) + submodule/a:(1|2)d(3|4) + submodule/sub/a:(1|2)d(3|4) + EOF + test_cmp expect actual +' test_expect_success 'grep --recurse-submodules should pass the pattern type along' ' # Fixed diff --git a/t/t8003-blame-corner-cases.sh b/t/t8003-blame-corner-cases.sh index 1c5fb1d1f8..9130b887d2 100755 --- a/t/t8003-blame-corner-cases.sh +++ b/t/t8003-blame-corner-cases.sh @@ -173,7 +173,6 @@ test_expect_success 'blame during cherry-pick with file rename conflict' ' git show HEAD@{1}:rodent > rodent && git add rodent && git blame -f -C -C1 rodent | sed -e "$pick_fc" >current && - cat current && cat >expected <<-\EOF && mouse-Initial mouse-Second diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 997f90b42b..90f61c3400 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -1194,8 +1194,8 @@ test_expect_success $PREREQ 'in-reply-to but no threading' ' --to=nobody@example.com \ --in-reply-to="<in-reply-id@example.com>" \ --no-thread \ - $patches | - grep "In-Reply-To: <in-reply-id@example.com>" + $patches >out && + grep "In-Reply-To: <in-reply-id@example.com>" out ' test_expect_success $PREREQ 'no in-reply-to and no threading' ' @@ -1260,7 +1260,7 @@ test_expect_success $PREREQ 'sendemail.identity: --no-identity clears previous i grep "To: default@example.com" stdout ' -test_expect_success $PREREQ 'sendemail.identity: bool identity variable existance overrides' ' +test_expect_success $PREREQ 'sendemail.identity: bool identity variable existence overrides' ' git -c sendemail.identity=cloud \ -c sendemail.xmailer=true \ -c sendemail.cloud.xmailer=false \ @@ -2066,7 +2066,7 @@ test_expect_success $PREREQ 'leading and trailing whitespaces are removed' ' TO1=$(echo "QTo 1 <to1@example.com>" | q_to_tab) && TO2=$(echo "QZto2" | qz_to_tab_space) && CC1=$(echo "cc1" | append_cr) && - BCC1=$(echo "Q bcc1@example.com Q" | q_to_nul) && + BCC1=$(echo " bcc1@example.com Q" | q_to_nul) && git send-email \ --dry-run \ --from=" Example <from@example.com>" \ diff --git a/t/t9010-svn-fe.sh b/t/t9010-svn-fe.sh index 0b20b07e68..83f8f5cacb 100755 --- a/t/t9010-svn-fe.sh +++ b/t/t9010-svn-fe.sh @@ -53,8 +53,6 @@ text_no_props () { printf "%s\n" "$text" } ->empty - test_expect_success 'empty dump' ' reinit_git && echo "SVN-fs-dump-format-version: 2" >input && @@ -208,7 +206,7 @@ test_expect_failure 'timestamp and empty file' ' test_cmp expect.date actual.date && test_cmp expect.files actual.files && git checkout HEAD empty-file && - test_cmp empty file + test_must_be_empty file ' test_expect_success 'directory with files' ' @@ -488,7 +486,7 @@ test_expect_success 'NUL in property value' ' { properties \ unimportant "something with a NUL (Q)" \ - svn:log "commit message"&& + svn:log "commit message" && echo PROPS-END } | q_to_nul >props && diff --git a/t/t9106-git-svn-commit-diff-clobber.sh b/t/t9106-git-svn-commit-diff-clobber.sh index dbe8deac0d..aec45bca3b 100755 --- a/t/t9106-git-svn-commit-diff-clobber.sh +++ b/t/t9106-git-svn-commit-diff-clobber.sh @@ -92,7 +92,8 @@ test_expect_success 'multiple dcommit from git svn will not clobber svn' " test_expect_success 'check that rebase really failed' ' - test -d .git/rebase-apply + git status >output && + grep currently.rebasing output ' test_expect_success 'resolve, continue the rebase and dcommit' " diff --git a/t/t9116-git-svn-log.sh b/t/t9116-git-svn-log.sh index 45773ee560..0a9f1ef366 100755 --- a/t/t9116-git-svn-log.sh +++ b/t/t9116-git-svn-log.sh @@ -43,14 +43,18 @@ test_expect_success 'setup repository and import' ' test_expect_success 'run log' " git reset --hard origin/a && - git svn log -r2 origin/trunk | grep ^r2 && - git svn log -r4 origin/trunk | grep ^r4 && - git svn log -r3 | grep ^r3 + git svn log -r2 origin/trunk >out && + grep ^r2 out && + git svn log -r4 origin/trunk >out && + grep ^r4 out && + git svn log -r3 >out && + grep ^r3 out " test_expect_success 'run log against a from trunk' " git reset --hard origin/trunk && - git svn log -r3 origin/a | grep ^r3 + git svn log -r3 origin/a >out && + grep ^r3 out " printf 'r1 \nr2 \nr4 \n' > expected-range-r1-r2-r4 diff --git a/t/t9141-git-svn-multiple-branches.sh b/t/t9141-git-svn-multiple-branches.sh index 8e7f7d68b7..bf168a3645 100755 --- a/t/t9141-git-svn-multiple-branches.sh +++ b/t/t9141-git-svn-multiple-branches.sh @@ -90,10 +90,10 @@ test_expect_success 'Multiple branch or tag paths require -d' ' ) && ( cd svn_project && svn_cmd up && - test_must_fail test -d b_one/Nope && - test_must_fail test -d b_two/Nope && - test_must_fail test -d tags_A/Tagless && - test_must_fail test -d tags_B/Tagless + test_path_is_missing b_one/Nope && + test_path_is_missing b_two/Nope && + test_path_is_missing tags_A/Tagless && + test_path_is_missing tags_B/Tagless ) ' diff --git a/t/t9160-git-svn-preserve-empty-dirs.sh b/t/t9160-git-svn-preserve-empty-dirs.sh index 0ede3cfedb..36c6b1a12f 100755 --- a/t/t9160-git-svn-preserve-empty-dirs.sh +++ b/t/t9160-git-svn-preserve-empty-dirs.sh @@ -86,8 +86,8 @@ test_expect_success 'remove non-last entry from directory' ' cd "$GIT_REPO" && git checkout HEAD~2 ) && - test_must_fail test -f "$GIT_REPO"/2/.gitignore && - test_must_fail test -f "$GIT_REPO"/3/.gitignore + test_path_is_missing "$GIT_REPO"/2/.gitignore && + test_path_is_missing "$GIT_REPO"/3/.gitignore ' # After re-cloning the repository with --placeholder-file specified, there diff --git a/t/t9164-git-svn-dcommit-concurrent.sh b/t/t9164-git-svn-dcommit-concurrent.sh index 90346ff4e9..8466269bf5 100755 --- a/t/t9164-git-svn-dcommit-concurrent.sh +++ b/t/t9164-git-svn-dcommit-concurrent.sh @@ -92,7 +92,7 @@ test_expect_success 'check if post-commit hook creates a concurrent commit' ' echo 1 >> file && svn_cmd commit -m "changing file" && svn_cmd up && - test_must_fail test_cmp auto_updated_file au_file_saved + ! test_cmp auto_updated_file au_file_saved ) ' @@ -103,7 +103,7 @@ test_expect_success 'check if pre-commit hook fails' ' echo 2 >> file && svn_cmd commit -m "changing file once again" && echo 3 >> file && - test_must_fail svn_cmd commit -m "this commit should fail" && + ! svn_cmd commit -m "this commit should fail" && svn_cmd revert file ) ' diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index e707fb861e..e151df81c0 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -410,6 +410,34 @@ test_expect_success 'B: accept empty committer' ' test -z "$out" ' +test_expect_success 'B: reject invalid timezone' ' + cat >input <<-INPUT_END && + commit refs/heads/invalid-timezone + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1234567890 +051800 + data <<COMMIT + empty commit + COMMIT + INPUT_END + + test_when_finished "git update-ref -d refs/heads/invalid-timezone" && + test_must_fail git fast-import <input +' + +test_expect_success 'B: accept invalid timezone with raw-permissive' ' + cat >input <<-INPUT_END && + commit refs/heads/invalid-timezone + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1234567890 +051800 + data <<COMMIT + empty commit + COMMIT + INPUT_END + + git init invalid-timezone && + git -C invalid-timezone fast-import --date-format=raw-permissive <input && + git -C invalid-timezone cat-file -p invalid-timezone >out && + grep "1234567890 [+]051800" out +' + test_expect_success 'B: accept and fixup committer with no name' ' cat >input <<-INPUT_END && commit refs/heads/empty-committer-2 @@ -1047,7 +1075,6 @@ test_expect_success 'M: rename root to subdirectory' ' EOF git fast-import <input && git diff-tree -M -r M4^ M4 >actual && - cat actual && compare_diff_raw expect actual ' @@ -2143,12 +2170,27 @@ test_expect_success 'R: abort on receiving feature after data command' ' test_must_fail git fast-import <input ' +test_expect_success 'R: import-marks features forbidden by default' ' + >git.marks && + echo "feature import-marks=git.marks" >input && + test_must_fail git fast-import <input && + echo "feature import-marks-if-exists=git.marks" >input && + test_must_fail git fast-import <input +' + test_expect_success 'R: only one import-marks feature allowed per stream' ' + >git.marks && + >git2.marks && cat >input <<-EOF && feature import-marks=git.marks feature import-marks=git2.marks EOF + test_must_fail git fast-import --allow-unsafe-features <input +' + +test_expect_success 'R: export-marks feature forbidden by default' ' + echo "feature export-marks=git.marks" >input && test_must_fail git fast-import <input ' @@ -2162,19 +2204,29 @@ test_expect_success 'R: export-marks feature results in a marks file being creat EOF - cat input | git fast-import && + git fast-import --allow-unsafe-features <input && grep :1 git.marks ' test_expect_success 'R: export-marks options can be overridden by commandline options' ' - cat input | git fast-import --export-marks=other.marks && - grep :1 other.marks + cat >input <<-\EOF && + feature export-marks=feature-sub/git.marks + blob + mark :1 + data 3 + hi + + EOF + git fast-import --allow-unsafe-features \ + --export-marks=cmdline-sub/other.marks <input && + grep :1 cmdline-sub/other.marks && + test_path_is_missing feature-sub ' test_expect_success 'R: catch typo in marks file name' ' test_must_fail git fast-import --import-marks=nonexistent.marks </dev/null && echo "feature import-marks=nonexistent.marks" | - test_must_fail git fast-import + test_must_fail git fast-import --allow-unsafe-features ' test_expect_success 'R: import and output marks can be the same file' ' @@ -2229,7 +2281,8 @@ test_expect_success 'R: --import-marks-if-exists' ' test_expect_success 'R: feature import-marks-if-exists' ' rm -f io.marks && - git fast-import --export-marks=io.marks <<-\EOF && + git fast-import --export-marks=io.marks \ + --allow-unsafe-features <<-\EOF && feature import-marks-if-exists=not_io.marks EOF test_must_be_empty io.marks && @@ -2240,7 +2293,8 @@ test_expect_success 'R: feature import-marks-if-exists' ' echo ":1 $blob" >expect && echo ":2 $blob" >>expect && - git fast-import --export-marks=io.marks <<-\EOF && + git fast-import --export-marks=io.marks \ + --allow-unsafe-features <<-\EOF && feature import-marks-if-exists=io.marks blob mark :2 @@ -2253,7 +2307,8 @@ test_expect_success 'R: feature import-marks-if-exists' ' echo ":3 $blob" >>expect && git fast-import --import-marks=io.marks \ - --export-marks=io.marks <<-\EOF && + --export-marks=io.marks \ + --allow-unsafe-features <<-\EOF && feature import-marks-if-exists=not_io.marks blob mark :3 @@ -2264,7 +2319,8 @@ test_expect_success 'R: feature import-marks-if-exists' ' test_cmp expect io.marks && git fast-import --import-marks-if-exists=not_io.marks \ - --export-marks=io.marks <<-\EOF && + --export-marks=io.marks \ + --allow-unsafe-features <<-\EOF && feature import-marks-if-exists=io.marks EOF test_must_be_empty io.marks @@ -2276,7 +2332,7 @@ test_expect_success 'R: import to output marks works without any content' ' feature export-marks=marks.new EOF - cat input | git fast-import && + git fast-import --allow-unsafe-features <input && test_cmp marks.out marks.new ' @@ -2286,7 +2342,7 @@ test_expect_success 'R: import marks prefers commandline marks file over the str feature export-marks=marks.new EOF - cat input | git fast-import --import-marks=marks.out && + git fast-import --import-marks=marks.out --allow-unsafe-features <input && test_cmp marks.out marks.new ' @@ -2299,7 +2355,8 @@ test_expect_success 'R: multiple --import-marks= should be honoured' ' head -n2 marks.out > one.marks && tail -n +3 marks.out > two.marks && - git fast-import --import-marks=one.marks --import-marks=two.marks <input && + git fast-import --import-marks=one.marks --import-marks=two.marks \ + --allow-unsafe-features <input && test_cmp marks.out combined.marks ' @@ -2312,7 +2369,7 @@ test_expect_success 'R: feature relative-marks should be honoured' ' mkdir -p .git/info/fast-import/ && cp marks.new .git/info/fast-import/relative.in && - git fast-import <input && + git fast-import --allow-unsafe-features <input && test_cmp marks.new .git/info/fast-import/relative.out ' @@ -2324,7 +2381,7 @@ test_expect_success 'R: feature no-relative-marks should be honoured' ' feature export-marks=non-relative.out EOF - git fast-import <input && + git fast-import --allow-unsafe-features <input && test_cmp marks.new non-relative.out ' @@ -2477,9 +2534,6 @@ test_expect_success PIPE 'R: copy using cat-file' ' echo $expect_id blob $expect_len >expect.response && rm -f blobs && - cat >frontend <<-\FRONTEND_END && - #!/bin/sh - FRONTEND_END mkfifo blobs && ( @@ -2594,7 +2648,7 @@ test_expect_success 'R: quiet option results in no stats being output' ' EOF - cat input | git fast-import 2> output && + git fast-import 2>output <input && test_must_be_empty output ' @@ -3164,13 +3218,22 @@ background_import_then_checkpoint () { exec 9<>V.output rm V.output - git fast-import $options <&8 >&9 & - echo $! >V.pid + ( + git fast-import $options <&8 >&9 & + echo $! >&9 + wait $! + echo >&2 "background fast-import terminated too early with exit code $?" + # Un-block the read loop in the main shell process. + echo >&9 UNEXPECTED + ) & + sh_pid=$! + read fi_pid <&9 # We don't mind if fast-import has already died by the time the test # ends. test_when_finished " exec 8>&-; exec 9>&-; - kill $(cat V.pid) && wait $(cat V.pid) + kill $sh_pid && wait $sh_pid + kill $fi_pid && wait $fi_pid true" # Start in the background to ensure we adhere strictly to (blocking) @@ -3190,6 +3253,9 @@ background_import_then_checkpoint () { then error=0 break + elif test "$output" = "UNEXPECTED" + then + break fi # otherwise ignore cruft echo >&2 "cruft: $output" @@ -3202,7 +3268,7 @@ background_import_then_checkpoint () { } background_import_still_running () { - if ! kill -0 "$(cat V.pid)" + if ! kill -0 "$fi_pid" then echo >&2 "background fast-import terminated too early" false @@ -3343,4 +3409,113 @@ test_expect_success 'X: handling encoding' ' git log -1 --format=%B encoding | grep $(printf "\317\200") ' +### +### series Y (submodules and hash algorithms) +### + +cat >Y-sub-input <<\Y_INPUT_END +blob +mark :1 +data 4 +foo + +reset refs/heads/master +commit refs/heads/master +mark :2 +author Full Name <user@company.tld> 1000000000 +0100 +committer Full Name <user@company.tld> 1000000000 +0100 +data 24 +Test submodule commit 1 +M 100644 :1 file + +blob +mark :3 +data 8 +foo +bar + +commit refs/heads/master +mark :4 +author Full Name <user@company.tld> 1000000001 +0100 +committer Full Name <user@company.tld> 1000000001 +0100 +data 24 +Test submodule commit 2 +from :2 +M 100644 :3 file +Y_INPUT_END + +# Note that the submodule object IDs are intentionally not translated. +cat >Y-main-input <<\Y_INPUT_END +blob +mark :1 +data 4 +foo + +reset refs/heads/master +commit refs/heads/master +mark :2 +author Full Name <user@company.tld> 2000000000 +0100 +committer Full Name <user@company.tld> 2000000000 +0100 +data 14 +Test commit 1 +M 100644 :1 file + +blob +mark :3 +data 73 +[submodule "sub1"] + path = sub1 + url = https://void.example.com/main.git + +commit refs/heads/master +mark :4 +author Full Name <user@company.tld> 2000000001 +0100 +committer Full Name <user@company.tld> 2000000001 +0100 +data 14 +Test commit 2 +from :2 +M 100644 :3 .gitmodules +M 160000 0712c5be7cf681388e355ef47525aaf23aee1a6d sub1 + +blob +mark :5 +data 8 +foo +bar + +commit refs/heads/master +mark :6 +author Full Name <user@company.tld> 2000000002 +0100 +committer Full Name <user@company.tld> 2000000002 +0100 +data 14 +Test commit 3 +from :4 +M 100644 :5 file +M 160000 ff729f5e62f72c0c3978207d9a80e5f3a65f14d7 sub1 +Y_INPUT_END + +cat >Y-marks <<\Y_INPUT_END +:2 0712c5be7cf681388e355ef47525aaf23aee1a6d +:4 ff729f5e62f72c0c3978207d9a80e5f3a65f14d7 +Y_INPUT_END + +test_expect_success 'Y: setup' ' + test_oid_cache <<-EOF + Ymaster sha1:9afed2f9161ddf416c0a1863b8b0725b00070504 + Ymaster sha256:c0a1010da1df187b2e287654793df01b464bd6f8e3f17fc1481a7dadf84caee3 + EOF +' + +test_expect_success 'Y: rewrite submodules' ' + git init main1 && + ( + cd main1 && + git init sub2 && + git -C sub2 fast-import --export-marks=../sub2-marks <../Y-sub-input && + git fast-import --rewrite-submodules-from=sub:../Y-marks \ + --rewrite-submodules-to=sub:sub2-marks <../Y-main-input && + test "$(git rev-parse master)" = "$(test_oid Ymaster)" + ) +' + test_done diff --git a/t/t9301-fast-import-notes.sh b/t/t9301-fast-import-notes.sh index dadc70b7d5..ca223dca98 100755 --- a/t/t9301-fast-import-notes.sh +++ b/t/t9301-fast-import-notes.sh @@ -275,7 +275,7 @@ $whitespace third note for first commit EXPECT_END -test_expect_success 'add concatentation notes with M command' ' +test_expect_success 'add concatenation notes with M command' ' git fast-import <input && GIT_NOTES_REF=refs/notes/test git log | grep "^ " > actual && diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 2e4e214815..690c90fb82 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -541,7 +541,7 @@ test_expect_success 'tree_tag' ' # NEEDSWORK: not just check return status, but validate the output # Note that these tests DO NOTHING other than print a warning that -# they are ommitting the one tag we asked them to export (because the +# they are omitting the one tag we asked them to export (because the # tags resolve to a tree). They exist just to make sure we do not # abort but instead just warn. test_expect_success 'tree_tag-obj' 'git fast-export tree_tag-obj' @@ -600,9 +600,10 @@ test_expect_success 'directory becomes symlink' ' test_expect_success 'fast-export quotes pathnames' ' git init crazy-paths && + test_config -C crazy-paths core.protectNTFS false && (cd crazy-paths && blob=$(echo foo | git hash-object -w --stdin) && - git update-index --add \ + git -c core.protectNTFS=false update-index --add \ --cacheinfo 100644 $blob "$(printf "path with\\nnewline")" \ --cacheinfo 100644 $blob "path with \"quote\"" \ --cacheinfo 100644 $blob "path with \\backslash" \ diff --git a/t/t9500-gitweb-standalone-no-errors.sh b/t/t9500-gitweb-standalone-no-errors.sh index cc8d463e01..267ddc997d 100755 --- a/t/t9500-gitweb-standalone-no-errors.sh +++ b/t/t9500-gitweb-standalone-no-errors.sh @@ -53,7 +53,7 @@ test_expect_success \ test_expect_success \ 'Make initial commit' \ - 'echo "Not an empty file." > file && + 'echo "Not an empty file." >file && git add file && git commit -a -m "Initial commit." && git branch b' @@ -139,7 +139,7 @@ test_expect_success \ test_expect_success \ 'commitdiff(0): file added' \ - 'echo "New file" > new_file && + 'echo "New file" >new_file && git add new_file && git commit -a -m "File added." && gitweb_run "p=.git;a=commitdiff"' @@ -179,7 +179,7 @@ test_expect_success \ test_expect_success \ 'commitdiff(0): mode change and modified' \ - 'echo "New line" >> file2 && + 'echo "New line" >>file2 && test_chmod +x file2 && git commit -a -m "Mode change and modification." && gitweb_run "p=.git;a=commitdiff"' @@ -197,14 +197,14 @@ propter nomen suum. EOF git commit -a -m "File added." && git mv file2 file3 && - echo "Propter nomen suum." >> file3 && + echo "Propter nomen suum." >>file3 && git commit -a -m "File rename and modification." && gitweb_run "p=.git;a=commitdiff"' test_expect_success \ 'commitdiff(0): renamed, mode change and modified' \ 'git mv file3 file2 && - echo "Propter nomen suum." >> file2 && + echo "Propter nomen suum." >>file2 && test_chmod +x file2 && git commit -a -m "File rename, mode change and modification." && gitweb_run "p=.git;a=commitdiff"' @@ -213,8 +213,8 @@ test_expect_success \ # commitdiff testing (taken from t4114-apply-typechange.sh) test_expect_success 'setup typechange commits' ' - echo "hello world" > foo && - echo "hi planet" > bar && + echo "hello world" >foo && + echo "hi planet" >bar && git update-index --add foo bar && git commit -m initial && git branch initial && @@ -223,18 +223,18 @@ test_expect_success 'setup typechange commits' ' git commit -m "foo symlinked to bar" && git branch foo-symlinked-to-bar && rm -f foo && - echo "how far is the sun?" > foo && + echo "how far is the sun?" >foo && git update-index foo && git commit -m "foo back to file" && git branch foo-back-to-file && rm -f foo && git update-index --remove foo && mkdir foo && - echo "if only I knew" > foo/baz && + echo "if only I knew" >foo/baz && git update-index --add foo/baz && git commit -m "foo becomes a directory" && git branch "foo-becomes-a-directory" && - echo "hello world" > foo/baz && + echo "hello world" >foo/baz && git update-index foo/baz && git commit -m "foo/baz is the original foo" && git branch foo-baz-renamed-from-foo @@ -324,7 +324,7 @@ test_expect_success 'commitdiff(1): removal of incomplete line' ' test_expect_success \ 'Create a merge' \ 'git checkout b && - echo "Branch" >> b && + echo "Branch" >>b && git add b && git commit -a -m "On branch" && git checkout master && @@ -342,26 +342,26 @@ test_expect_success \ test_expect_success \ 'Prepare large commit' \ 'git checkout b && - echo "To be changed" > 01-change && - echo "To be renamed" > 02-pure-rename-from && - echo "To be deleted" > 03-delete && - echo "To be renamed and changed" > 04-rename-from && - echo "To have mode changed" > 05-mode-change && - echo "File to symlink" > 06-file-or-symlink && - echo "To be changed and have mode changed" > 07-change-mode-change && + echo "To be changed" >01-change && + echo "To be renamed" >02-pure-rename-from && + echo "To be deleted" >03-delete && + echo "To be renamed and changed" >04-rename-from && + echo "To have mode changed" >05-mode-change && + echo "File to symlink" >06-file-or-symlink && + echo "To be changed and have mode changed" >07-change-mode-change && git add 0* && git commit -a -m "Prepare large commit" && - echo "Changed" > 01-change && + echo "Changed" >01-change && git mv 02-pure-rename-from 02-pure-rename-to && git rm 03-delete && rm -f 03-delete && - echo "A new file" > 03-new && + echo "A new file" >03-new && git add 03-new && git mv 04-rename-from 04-rename-to && - echo "Changed" >> 04-rename-to && + echo "Changed" >>04-rename-to && test_chmod +x 05-mode-change && rm -f 06-file-or-symlink && test_ln_s_add 01-change 06-file-or-symlink && - echo "Changed and have mode changed" > 07-change-mode-change && + echo "Changed and have mode changed" >07-change-mode-change && test_chmod +x 07-change-mode-change && git commit -a -m "Large commit" && git checkout master' @@ -444,7 +444,7 @@ test_expect_success \ test_expect_success \ 'logs: history (implicit HEAD, deleted file)' \ 'git checkout master && - echo "to be deleted" > deleted_file && + echo "to be deleted" >deleted_file && git add deleted_file && git commit -m "Add file to be deleted" && git rm deleted_file && @@ -522,7 +522,7 @@ test_expect_success \ '. "$TEST_DIRECTORY"/t3901/utf8.txt && test_when_finished "GIT_AUTHOR_NAME=\"A U Thor\"" && test_when_finished "GIT_COMMITTER_NAME=\"C O Mitter\"" && - echo "UTF-8" >> file && + echo "UTF-8" >>file && git add file && git commit -F "$TEST_DIRECTORY"/t3900/1-UTF-8.txt && gitweb_run "p=.git;a=commit"' @@ -532,7 +532,7 @@ test_expect_success \ '. "$TEST_DIRECTORY"/t3901/8859-1.txt && test_when_finished "GIT_AUTHOR_NAME=\"A U Thor\"" && test_when_finished "GIT_COMMITTER_NAME=\"C O Mitter\"" && - echo "ISO-8859-1" >> file && + echo "ISO-8859-1" >>file && git add file && test_config i18n.commitencoding ISO-8859-1 && git commit -F "$TEST_DIRECTORY"/t3900/ISO8859-1.txt && @@ -675,8 +675,8 @@ test_expect_success \ test_expect_success \ 'README.html with non-ASCII characters (utf-8)' \ - 'echo "<b>UTF-8 example:</b><br />" > .git/README.html && - cat "$TEST_DIRECTORY"/t3900/1-UTF-8.txt >> .git/README.html && + 'echo "<b>UTF-8 example:</b><br />" >.git/README.html && + cat "$TEST_DIRECTORY"/t3900/1-UTF-8.txt >>.git/README.html && gitweb_run "p=.git;a=summary"' # ---------------------------------------------------------------------- @@ -704,7 +704,7 @@ test_expect_success HIGHLIGHT \ test_expect_success HIGHLIGHT \ 'syntax highlighting (highlighted, shell script)' \ 'git config gitweb.highlight yes && - echo "#!/usr/bin/sh" > test.sh && + echo "#!/usr/bin/sh" >test.sh && git add test.sh && git commit -m "Add test.sh" && gitweb_run "p=.git;a=blob;f=test.sh"' @@ -712,7 +712,7 @@ test_expect_success HIGHLIGHT \ test_expect_success HIGHLIGHT \ 'syntax highlighting (highlighter language autodetection)' \ 'git config gitweb.highlight yes && - echo "#!/usr/bin/perl" > test && + echo "#!/usr/bin/perl" >test && git add test && git commit -m "Add test" && gitweb_run "p=.git;a=blob;f=test"' @@ -729,11 +729,11 @@ test_expect_success \ 'git init --bare foo.git && git --git-dir=foo.git --work-tree=. add file && git --git-dir=foo.git --work-tree=. commit -m "Initial commit" && - echo "foo" > foo.git/description && + echo "foo" >foo.git/description && mkdir -p foo && (cd foo && git clone --shared --bare ../foo.git foo-forked.git && - echo "fork of foo" > foo-forked.git/description)' + echo "fork of foo" >foo-forked.git/description)' test_expect_success \ 'forks: projects list' \ @@ -754,8 +754,8 @@ EOF test_expect_success \ 'ctags: tag cloud in projects list' \ 'mkdir .git/ctags && - echo "2" > .git/ctags/foo && - echo "1" > .git/ctags/bar && + echo "2" >.git/ctags/foo && + echo "1" >.git/ctags/bar && gitweb_run' test_expect_success \ @@ -769,8 +769,8 @@ test_expect_success \ test_expect_success \ 'ctags: malformed tag weights' \ 'mkdir -p .git/ctags && - echo "not-a-number" > .git/ctags/nan && - echo "not-a-number-2" > .git/ctags/nan2 && + echo "not-a-number" >.git/ctags/nan && + echo "not-a-number-2" >.git/ctags/nan2 && echo "0.1" >.git/ctags/floating-point && gitweb_run' diff --git a/t/t9502-gitweb-standalone-parse-output.sh b/t/t9502-gitweb-standalone-parse-output.sh index 0796a438bc..e38cbc97d3 100755 --- a/t/t9502-gitweb-standalone-parse-output.sh +++ b/t/t9502-gitweb-standalone-parse-output.sh @@ -188,8 +188,8 @@ test_expect_success 'forks: project_index lists all projects (incl. forks)' ' ' xss() { - echo >&2 "Checking $1..." && - gitweb_run "$1" && + echo >&2 "Checking $*..." && + gitweb_run "$@" && if grep "$TAG" gitweb.body; then echo >&2 "xss: $TAG should have been quoted in output" return 1 @@ -200,7 +200,8 @@ xss() { test_expect_success 'xss checks' ' TAG="<magic-xss-tag>" && xss "a=rss&p=$TAG" && - xss "a=rss&p=foo.git&f=$TAG" + xss "a=rss&p=foo.git&f=$TAG" && + xss "" "$TAG+" ' test_done diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 5856563068..c98c1dfc23 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -202,7 +202,6 @@ test_expect_success 'exit when p4 fails to produce marshaled output' ' export PATH && test_expect_code 1 git p4 clone --dest="$git" //depot >errs 2>&1 ) && - cat errs && test_i18ngrep ! Traceback errs ' diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh index 3cff1fce1b..9c9710d8c7 100755 --- a/t/t9809-git-p4-client-view.sh +++ b/t/t9809-git-p4-client-view.sh @@ -407,7 +407,7 @@ test_expect_success 'reinit depot' ' ' # -# What happens when two files of the same name are overlayed together? +# What happens when two files of the same name are overlaid together? # The last-listed file should take preference. # # //depot diff --git a/t/t9810-git-p4-rcs.sh b/t/t9810-git-p4-rcs.sh index 57b533dc6f..e3836888ec 100755 --- a/t/t9810-git-p4-rcs.sh +++ b/t/t9810-git-p4-rcs.sh @@ -294,7 +294,6 @@ test_expect_success 'cope with rcs keyword file deletion' ' echo "\$Revision\$" >kwdelfile.c && p4 add -t ktext kwdelfile.c && p4 submit -d "Add file to be deleted" && - cat kwdelfile.c && grep 1 kwdelfile.c ) && git p4 clone --dest="$git" //depot && diff --git a/t/t9819-git-p4-case-folding.sh b/t/t9819-git-p4-case-folding.sh index 600ce1e0b0..b4d93f0c17 100755 --- a/t/t9819-git-p4-case-folding.sh +++ b/t/t9819-git-p4-case-folding.sh @@ -30,7 +30,7 @@ test_expect_success 'Check p4 is in case-folding mode' ' cd "$cli" && >lc/FILE.TXT && p4 add lc/FILE.TXT && - test_must_fail p4 submit -d "Cannot add file differing only in case" lc/FILE.TXT + ! p4 submit -d "Cannot add file differing only in case" lc/FILE.TXT ) ' diff --git a/t/t9831-git-p4-triggers.sh b/t/t9831-git-p4-triggers.sh index d743ca33ee..ff6c0352e6 100755 --- a/t/t9831-git-p4-triggers.sh +++ b/t/t9831-git-p4-triggers.sh @@ -58,7 +58,7 @@ test_expect_success 'import with extra info lines from verbose p4 trigger' ' ( cd "$git" && git p4 sync - )&& + ) && ( p4 triggers -i <<-EOF Triggers: diff --git a/t/t9834-git-p4-file-dir-bug.sh b/t/t9834-git-p4-file-dir-bug.sh new file mode 100755 index 0000000000..031e1f8668 --- /dev/null +++ b/t/t9834-git-p4-file-dir-bug.sh @@ -0,0 +1,70 @@ +#!/bin/sh + +test_description='git p4 directory/file bug handling + +This test creates files and directories with the same name in perforce and +checks that git-p4 recovers from the error at the same time as the perforce +repository.' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d && + test_might_fail p4 configure set submit.collision.check=0 +' + +test_expect_success 'init depot' ' + ( + cd "$cli" && + + touch add_file_add_dir_del_file add_file_add_dir_del_dir && + p4 add add_file_add_dir_del_file add_file_add_dir_del_dir && + mkdir add_dir_add_file_del_file add_dir_add_file_del_dir && + touch add_dir_add_file_del_file/file add_dir_add_file_del_dir/file && + p4 add add_dir_add_file_del_file/file add_dir_add_file_del_dir/file && + p4 submit -d "add initial" && + + rm -f add_file_add_dir_del_file add_file_add_dir_del_dir && + mkdir add_file_add_dir_del_file add_file_add_dir_del_dir && + touch add_file_add_dir_del_file/file add_file_add_dir_del_dir/file && + p4 add add_file_add_dir_del_file/file add_file_add_dir_del_dir/file && + rm -rf add_dir_add_file_del_file add_dir_add_file_del_dir && + touch add_dir_add_file_del_file add_dir_add_file_del_dir && + p4 add add_dir_add_file_del_file add_dir_add_file_del_dir && + p4 submit -d "add conflicting" && + + p4 delete -k add_file_add_dir_del_file && + p4 delete -k add_file_add_dir_del_dir/file && + p4 delete -k add_dir_add_file_del_file && + p4 delete -k add_dir_add_file_del_dir/file && + p4 submit -d "delete conflicting" && + + p4 delete -k "add_file_add_dir_del_file/file" && + p4 delete -k "add_file_add_dir_del_dir" && + p4 delete -k "add_dir_add_file_del_file/file" && + p4 delete -k "add_dir_add_file_del_dir" && + p4 submit -d "delete remaining" + ) +' + +test_expect_success 'clone with git-p4' ' + git p4 clone --dest="$git" //depot/@1,3 +' + +test_expect_success 'check contents' ' + test_path_is_dir "$git/add_file_add_dir_del_file" && + test_path_is_file "$git/add_file_add_dir_del_dir" && + test_path_is_dir "$git/add_dir_add_file_del_file" && + test_path_is_file "$git/add_dir_add_file_del_dir" +' + +test_expect_success 'rebase and check empty' ' + git -C "$git" p4 rebase && + + test_path_is_missing "$git/add_file_add_dir_del_file" && + test_path_is_missing "$git/add_file_add_dir_del_dir" && + test_path_is_missing "$git/add_dir_add_file_del_file" && + test_path_is_missing "$git/add_dir_add_file_del_dir" +' + +test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 54f8ce18cb..3c44af6940 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -378,7 +378,7 @@ test_expect_success '__gitdir - finds repo' ' ' -test_expect_success '__gitdir - returns error when cant find repo' ' +test_expect_success '__gitdir - returns error when cannot find repo' ' ( __git_dir="non-existing" && test_must_fail __gitdir >"$actual" @@ -945,7 +945,7 @@ test_expect_success 'setup for filtering matching refs' ' rm -f .git/FETCH_HEAD ' -test_expect_success '__git_refs - dont filter refs unless told so' ' +test_expect_success '__git_refs - do not filter refs unless told so' ' cat >expected <<-EOF && HEAD master @@ -1257,7 +1257,7 @@ test_path_completion () # In the following tests calling this function we only # care about how __git_complete_index_file() deals with # unusual characters in path names. By requesting only - # untracked files we dont have to bother adding any + # untracked files we do not have to bother adding any # paths to the index in those tests. __git_complete_index_file --others && print_comp @@ -1363,6 +1363,63 @@ test_expect_success 'teardown after path completion tests' ' BS\\dir '$'separators\034in\035dir'' ' +test_expect_success '__git_find_on_cmdline - single match' ' + echo list >expect && + ( + words=(git command --opt list) && + cword=${#words[@]} && + __git_find_on_cmdline "add list remove" >actual + ) && + test_cmp expect actual +' + +test_expect_success '__git_find_on_cmdline - multiple matches' ' + echo remove >expect && + ( + words=(git command -o --opt remove list add) && + cword=${#words[@]} && + __git_find_on_cmdline "add list remove" >actual + ) && + test_cmp expect actual +' + +test_expect_success '__git_find_on_cmdline - no match' ' + ( + words=(git command --opt branch) && + cword=${#words[@]} && + __git_find_on_cmdline "add list remove" >actual + ) && + test_must_be_empty actual +' + +test_expect_success '__git_find_on_cmdline - single match with index' ' + echo "3 list" >expect && + ( + words=(git command --opt list) && + cword=${#words[@]} && + __git_find_on_cmdline --show-idx "add list remove" >actual + ) && + test_cmp expect actual +' + +test_expect_success '__git_find_on_cmdline - multiple matches with index' ' + echo "4 remove" >expect && + ( + words=(git command -o --opt remove list add) && + cword=${#words[@]} && + __git_find_on_cmdline --show-idx "add list remove" >actual + ) && + test_cmp expect actual +' + +test_expect_success '__git_find_on_cmdline - no match with index' ' + ( + words=(git command --opt branch) && + cword=${#words[@]} && + __git_find_on_cmdline --show-idx "add list remove" >actual + ) && + test_must_be_empty actual +' test_expect_success '__git_get_config_variables' ' cat >expect <<-EOF && @@ -1438,6 +1495,8 @@ test_expect_success 'double dash "git checkout"' ' --no-guess Z --no-... Z --overlay Z + --pathspec-file-nul Z + --pathspec-from-file=Z EOF ' @@ -1548,7 +1607,10 @@ test_expect_success 'complete tree filename with metacharacters' ' ' test_expect_success PERL 'send-email' ' - test_completion "git send-email --cov" "--cover-letter " && + test_completion "git send-email --cov" <<-\EOF && + --cover-from-description=Z + --cover-letter Z + EOF test_completion "git send-email ma" "master " ' @@ -1576,6 +1638,11 @@ test_expect_success 'complete files' ' echo modify > modified && test_completion "git add " "modified" && + mkdir -p some/deep && + touch some/deep/path && + test_completion "git add some/" "some/deep" && + git clean -f some && + touch untracked && : TODO .gitignore should not be here && diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 88bc733ad6..ab5da2cabc 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -163,7 +163,7 @@ test_expect_success 'prompt - inside bare repository' ' ' test_expect_success 'prompt - interactive rebase' ' - printf " (b1|REBASE-i 2/3)" >expected && + printf " (b1|REBASE 2/3)" >expected && write_script fake_editor.sh <<-\EOF && echo "exec echo" >"$1" echo "edit $(git log -1 --format="%h")" >>"$1" @@ -180,7 +180,7 @@ test_expect_success 'prompt - interactive rebase' ' ' test_expect_success 'prompt - rebase merge' ' - printf " (b2|REBASE-i 1/3)" >expected && + printf " (b2|REBASE 1/3)" >expected && git checkout b2 && test_when_finished "git checkout master" && test_must_fail git rebase --merge b1 b2 && @@ -189,11 +189,11 @@ test_expect_success 'prompt - rebase merge' ' test_cmp expected "$actual" ' -test_expect_success 'prompt - rebase' ' +test_expect_success 'prompt - rebase am' ' printf " (b2|REBASE 1/3)" >expected && git checkout b2 && test_when_finished "git checkout master" && - test_must_fail git rebase b1 b2 && + test_must_fail git rebase --apply b1 b2 && test_when_finished "git rebase --abort" && __git_ps1 >"$actual" && test_cmp expected "$actual" diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index b299ecc326..3103be8a32 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -308,7 +308,7 @@ test_commit_bulk () { total=$1 add_from= - if git -C "$indir" rev-parse --verify "$ref" + if git -C "$indir" rev-parse --quiet --verify "$ref" then add_from=t fi @@ -905,7 +905,7 @@ test_expect_code () { # - not all diff versions understand "-u" test_cmp() { - $GIT_TEST_CMP "$@" + eval "$GIT_TEST_CMP" '"$@"' } # Check that the given config key has the expected value. @@ -1012,19 +1012,30 @@ test_must_be_empty () { fi } -# Tests that its two parameters refer to the same revision +# Tests that its two parameters refer to the same revision, or if '!' is +# provided first, that its other two parameters refer to different +# revisions. test_cmp_rev () { + local op='=' wrong_result=different + + if test $# -ge 1 && test "x$1" = 'x!' + then + op='!=' + wrong_result='the same' + shift + fi if test $# != 2 then error "bug in the test script: test_cmp_rev requires two revisions, but got $#" else local r1 r2 r1=$(git rev-parse --verify "$1") && - r2=$(git rev-parse --verify "$2") && - if test "$r1" != "$r2" + r2=$(git rev-parse --verify "$2") || return 1 + + if ! test "$r1" "$op" "$r2" then cat >&4 <<-EOF - error: two revisions point to different objects: + error: two revisions point to $wrong_result objects: '$1': $r1 '$2': $r2 EOF @@ -1175,6 +1186,34 @@ perl () { command "$PERL_PATH" "$@" 2>&7 } 7>&2 2>&4 +# Given the name of an environment variable with a bool value, normalize +# its value to a 0 (true) or 1 (false or empty string) return code. +# +# test_bool_env GIT_TEST_HTTPD <default-value> +# +# Return with code corresponding to the given default value if the variable +# is unset. +# Abort the test script if either the value of the variable or the default +# are not valid bool values. + +test_bool_env () { + if test $# != 2 + then + BUG "test_bool_env requires two parameters (variable name and default value)" + fi + + git env--helper --type=bool --default="$2" --exit-code "$1" + ret=$? + case $ret in + 0|1) # unset or valid bool value + ;; + *) # invalid bool value or something unexpected + error >&7 "test_bool_env requires bool values both for \$$1 and for the default fallback" + ;; + esac + return $ret +} + # Exit the test suite, either by skipping all remaining tests or by # exiting with an error. If our prerequisite variable $1 falls back # on a default assume we were opportunistically trying to set up some @@ -1183,7 +1222,7 @@ perl () { # The error/skip message should be given by $2. # test_skip_or_die () { - if ! git env--helper --type=bool --default=false --exit-code $1 + if ! test_bool_env "$1" false then skip_all=$2 test_done @@ -1323,14 +1362,22 @@ nongit () { ) } 7>&2 2>&4 -# convert stdin to pktline representation; note that empty input becomes an -# empty packet, not a flush packet (for that you can just print 0000 yourself). +# convert function arguments or stdin (if not arguments given) to pktline +# representation. If multiple arguments are given, they are separated by +# whitespace and put in a single packet. Note that data containing NULs must be +# given on stdin, and that empty input becomes an empty packet, not a flush +# packet (for that you can just print 0000 yourself). packetize() { - cat >packetize.tmp && - len=$(wc -c <packetize.tmp) && - printf '%04x%s' "$(($len + 4))" && - cat packetize.tmp && - rm -f packetize.tmp + if test $# -gt 0 + then + packet="$*" + printf '%04x%s' "$((4 + ${#packet}))" "$packet" + else + perl -e ' + my $packet = do { local $/; <STDIN> }; + printf "%04x%s", 4 + length($packet), $packet; + ' + fi } # Parse the input as a series of pktlines, writing the result to stdout. @@ -1477,3 +1524,40 @@ test_set_port () { port=$(($port + ${GIT_TEST_STRESS_JOB_NR:-0})) eval $var=$port } + +# Compare a file containing rev-list bitmap traversal output to its non-bitmap +# counterpart. You can't just use test_cmp for this, because the two produce +# subtly different output: +# +# - regular output is in traversal order, whereas bitmap is split by type, +# with non-packed objects at the end +# +# - regular output has a space and the pathname appended to non-commit +# objects; bitmap output omits this +# +# This function normalizes and compares the two. The second file should +# always be the bitmap output. +test_bitmap_traversal () { + if test "$1" = "--no-confirm-bitmaps" + then + shift + elif cmp "$1" "$2" + then + echo >&2 "identical raw outputs; are you sure bitmaps were used?" + return 1 + fi && + cut -d' ' -f1 "$1" | sort >"$1.normalized" && + sort "$2" >"$2.normalized" && + test_cmp "$1.normalized" "$2.normalized" && + rm -f "$1.normalized" "$2.normalized" +} + +# Tests for the hidden file attribute on Windows +test_path_is_hidden () { + test_have_prereq MINGW || + BUG "test_path_is_hidden can only be used on Windows" + + # Use the output of `attrib`, ignore the absolute path + case "$("$SYSTEMROOT"/system32/attrib "$1")" in *H*?:*) return 0;; esac + return 1 +} diff --git a/t/test-lib.sh b/t/test-lib.sh index e06fa02a0e..dbc027ff26 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -78,20 +78,23 @@ then exit 1 fi -# Parse options while taking care to leave $@ intact, so we will still -# have all the original command line options when executing the test -# script again for '--tee' and '--verbose-log' below. store_arg_to= -prev_opt= -for opt -do - if test -n "$store_arg_to" +opt_required_arg= +# $1: option string +# $2: name of the var where the arg will be stored +mark_option_requires_arg () { + if test -n "$opt_required_arg" then - eval $store_arg_to=\$opt - store_arg_to= - prev_opt= - continue + echo "error: options that require args cannot be bundled" \ + "together: '$opt_required_arg' and '$1'" >&2 + exit 1 fi + opt_required_arg=$1 + store_arg_to=$2 +} + +parse_option () { + local opt="$1" case "$opt" in -d|--d|--de|--deb|--debu|--debug) @@ -101,7 +104,7 @@ do -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) GIT_TEST_LONG=t; export GIT_TEST_LONG ;; -r) - store_arg_to=run_list + mark_option_requires_arg "$opt" run_list ;; --run=*) run_list=${opt#--*=} ;; @@ -185,12 +188,42 @@ do *) echo "error: unknown test option '$opt'" >&2; exit 1 ;; esac +} + +# Parse options while taking care to leave $@ intact, so we will still +# have all the original command line options when executing the test +# script again for '--tee' and '--verbose-log' later. +for opt +do + if test -n "$store_arg_to" + then + eval $store_arg_to=\$opt + store_arg_to= + opt_required_arg= + continue + fi - prev_opt=$opt + case "$opt" in + --*|-?) + parse_option "$opt" ;; + -?*) + # bundled short options must be fed separately to parse_option + opt=${opt#-} + while test -n "$opt" + do + extra=${opt#?} + this=${opt%$extra} + opt=$extra + parse_option "-$this" + done + ;; + *) + echo "error: unknown test option '$opt'" >&2; exit 1 ;; + esac done if test -n "$store_arg_to" then - echo "error: $prev_opt requires an argument" >&2 + echo "error: $opt_required_arg requires an argument" >&2 exit 1 fi @@ -404,9 +437,13 @@ unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e ' unset XDG_CACHE_HOME unset XDG_CONFIG_HOME unset GITPERLLIB -GIT_AUTHOR_EMAIL=author@example.com +TEST_AUTHOR_LOCALNAME=author +TEST_AUTHOR_DOMAIN=example.com +GIT_AUTHOR_EMAIL=${TEST_AUTHOR_LOCALNAME}@${TEST_AUTHOR_DOMAIN} GIT_AUTHOR_NAME='A U Thor' -GIT_COMMITTER_EMAIL=committer@example.com +TEST_COMMITTER_LOCALNAME=committer +TEST_COMMITTER_DOMAIN=example.com +GIT_COMMITTER_EMAIL=${TEST_COMMITTER_LOCALNAME}@${TEST_COMMITTER_DOMAIN} GIT_COMMITTER_NAME='C O Mitter' GIT_MERGE_VERBOSITY=5 GIT_MERGE_AUTOEDIT=no @@ -490,21 +527,6 @@ case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in ;; esac -# Convenience -# -# A regexp to match 5, 35 and 40 hexdigits -_x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' -_x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05" -_x40="$_x35$_x05" - -# Zero SHA-1 -_z40=0000000000000000000000000000000000000000 - -OID_REGEX="$_x40" -ZERO_OID=$_z40 -EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904 -EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 - # Line feed LF=' ' @@ -878,6 +900,7 @@ maybe_setup_valgrind () { fi } +trace_level_=0 want_trace () { test "$trace" = t && { test "$verbose" = t || test "$verbose_log" = t @@ -891,7 +914,7 @@ want_trace () { test_eval_inner_ () { # Do not add anything extra (including LF) after '$*' eval " - want_trace && set -x + want_trace && trace_level_=$(($trace_level_+1)) && set -x $*" } @@ -922,7 +945,8 @@ test_eval_ () { test_eval_ret_=$? if want_trace then - set +x + test 1 = $trace_level_ && set +x + trace_level_=$(($trace_level_-1)) fi } 2>/dev/null 4>&2 @@ -1000,6 +1024,12 @@ test_skip () { to_skip=t skipped_reason="GIT_SKIP_TESTS" fi + if test -z "$to_skip" && test -n "$run_list" && + ! match_test_selector_list '--run' $test_count "$run_list" + then + to_skip=t + skipped_reason="--run" + fi if test -z "$to_skip" && test -n "$test_prereq" && ! test_have_prereq "$test_prereq" then @@ -1012,12 +1042,6 @@ test_skip () { fi skipped_reason="missing $missing_prereq${of_prereq}" fi - if test -z "$to_skip" && test -n "$run_list" && - ! match_test_selector_list '--run' $test_count "$run_list" - then - to_skip=t - skipped_reason="--run" - fi case "$to_skip" in t) @@ -1079,7 +1103,9 @@ finalize_junit_xml () { # adjust the overall time junit_time=$(test-tool date getnanos $junit_suite_start) - sed "s/<testsuite [^>]*/& time=\"$junit_time\"/" \ + sed -e "s/\(<testsuite.*\) time=\"[^\"]*\"/\1/" \ + -e "s/<testsuite [^>]*/& time=\"$junit_time\"/" \ + -e '/^ *<\/testsuite/d' \ <"$junit_xml_path" >"$junit_xml_path.new" mv "$junit_xml_path.new" "$junit_xml_path" @@ -1378,6 +1404,20 @@ then fi fi +# Convenience +# A regexp to match 5, 35 and 40 hexdigits +_x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' +_x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05" +_x40="$_x35$_x05" + +test_oid_init + +ZERO_OID=$(test_oid zero) +OID_REGEX=$(echo $ZERO_OID | sed -e 's/0/[0-9a-f]/g') +EMPTY_TREE=$(test_oid empty_tree) +EMPTY_BLOB=$(test_oid empty_blob) +_z40=$ZERO_OID + # Provide an implementation of the 'yes' utility; the upper bound # limit is there to help Windows that cannot stop this loop from # wasting cycles when the downstream stops reading, so do not be @@ -1402,23 +1442,23 @@ yes () { # The GIT_TEST_FAIL_PREREQS code hooks into test_set_prereq(), and # thus needs to be set up really early, and set an internal variable # for convenience so the hot test_set_prereq() codepath doesn't need -# to call "git env--helper". Only do that work if needed by seeing if -# GIT_TEST_FAIL_PREREQS is set at all. +# to call "git env--helper" (via test_bool_env). Only do that work +# if needed by seeing if GIT_TEST_FAIL_PREREQS is set at all. GIT_TEST_FAIL_PREREQS_INTERNAL= if test -n "$GIT_TEST_FAIL_PREREQS" then - if git env--helper --type=bool --default=0 --exit-code GIT_TEST_FAIL_PREREQS + if test_bool_env GIT_TEST_FAIL_PREREQS false then GIT_TEST_FAIL_PREREQS_INTERNAL=true test_set_prereq FAIL_PREREQS fi else test_lazy_prereq FAIL_PREREQS ' - git env--helper --type=bool --default=0 --exit-code GIT_TEST_FAIL_PREREQS + test_bool_env GIT_TEST_FAIL_PREREQS false ' fi -# Fix some commands on Windows +# Fix some commands on Windows, and other OS-specific things uname_s=$(uname -s) case $uname_s in *MINGW*) @@ -1456,6 +1496,14 @@ case $uname_s in ;; esac +# Detect arches where a few things don't work +uname_m=$(uname -m) +case $uname_m in +parisc* | hppa*) + test_set_prereq HPPA + ;; +esac + ( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1 test -z "$NO_PERL" && test_set_prereq PERL test -z "$NO_PTHREADS" && test_set_prereq PTHREADS @@ -1473,7 +1521,7 @@ then fi test_lazy_prereq C_LOCALE_OUTPUT ' - ! git env--helper --type=bool --default=0 --exit-code GIT_TEST_GETTEXT_POISON + ! test_bool_env GIT_TEST_GETTEXT_POISON false ' if test -z "$GIT_TEST_CHECK_CACHE_TREE" @@ -1595,7 +1643,7 @@ run_with_limited_cmdline () { } test_lazy_prereq CMDLINE_LIMIT ' - test_have_prereq !MINGW,!CYGWIN && + test_have_prereq !HPPA,!MINGW,!CYGWIN && run_with_limited_cmdline true ' @@ -1604,10 +1652,19 @@ run_with_limited_stack () { } test_lazy_prereq ULIMIT_STACK_SIZE ' - test_have_prereq !MINGW,!CYGWIN && + test_have_prereq !HPPA,!MINGW,!CYGWIN && run_with_limited_stack true ' +run_with_limited_open_files () { + (ulimit -n 32 && "$@") +} + +test_lazy_prereq ULIMIT_FILE_DESCRIPTORS ' + test_have_prereq !MINGW,!CYGWIN && + run_with_limited_open_files true +' + build_option () { git version --build-options | sed -ne "s/^$1: //p" |