diff options
Diffstat (limited to 't')
| -rw-r--r-- | t/README | 6 | ||||
| -rwxr-xr-x | t/t0000-basic.sh | 21 | ||||
| -rwxr-xr-x | t/t0001-init.sh | 14 | ||||
| -rwxr-xr-x | t/t0003-attributes.sh | 15 | ||||
| -rwxr-xr-x | t/t1501-worktree.sh | 12 | ||||
| -rwxr-xr-x | t/t4201-shortlog.sh | 116 | ||||
| -rwxr-xr-x | t/t5516-fetch-push.sh | 2 | ||||
| -rwxr-xr-x | t/t5541-http-push.sh | 29 | ||||
| -rwxr-xr-x | t/t5550-http-fetch.sh | 37 | ||||
| -rwxr-xr-x | t/t5601-clone.sh | 2 | ||||
| -rwxr-xr-x | t/t5704-bundle.sh | 16 | ||||
| -rwxr-xr-x | t/t5705-clone-2gb.sh | 12 | ||||
| -rwxr-xr-x | t/t6006-rev-list-format.sh | 31 | ||||
| -rwxr-xr-x | t/t6120-describe.sh | 8 | ||||
| -rwxr-xr-x | t/t7006-pager.sh | 149 | ||||
| -rwxr-xr-x | t/t7502-commit.sh | 2 | ||||
| -rwxr-xr-x | t/t7508-status.sh | 25 | ||||
| -rw-r--r-- | t/test-lib.sh | 57 |
18 files changed, 466 insertions, 88 deletions
@@ -84,6 +84,12 @@ appropriately before running "make". implied by other options like --valgrind and GIT_TEST_INSTALLED. +--root=<directory>:: + Create "trash" directories used to store all temporary data during + testing under <directory>, instead of the t/ directory. + Using this option with a RAM-based filesystem (such as tmpfs) + can massively speed up the test suite. + You can also set the GIT_TEST_INSTALLED environment variable to the bindir of an existing git installation to test that installation. You still need to have built this git sandbox, from which various diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index f4ca4fc85c..3ec9cbef2c 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -73,6 +73,27 @@ then exit 1 fi +clean=no +test_expect_success 'tests clean up after themselves' ' + test_when_finished clean=yes +' + +cleaner=no +test_expect_code 1 'tests clean up even after a failure' ' + test_when_finished cleaner=yes && + (exit 1) +' + +if test $clean$cleaner != yesyes +then + say "bug in test framework: cleanup commands do not work reliably" + exit 1 +fi + +test_expect_code 2 'failure to clean up causes the test to fail' ' + test_when_finished "(exit 2)" +' + ################################################################ # Basics of the basics diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 675773479a..7c0a698b92 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -310,4 +310,18 @@ test_expect_success POSIXPERM 'init notices EPERM' ' ) ' +test_expect_success 'init creates a new bare directory with global --bare' ' + rm -rf newdir && + git --bare init newdir && + test -d newdir/refs +' + +test_expect_success 'init prefers command line to GIT_DIR' ' + rm -rf newdir && + mkdir otherdir && + GIT_DIR=otherdir git --bare init newdir && + test -d newdir/refs && + ! test -d otherdir/refs +' + test_done diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh index 1c77192eb3..53bd7fcc4a 100755 --- a/t/t0003-attributes.sh +++ b/t/t0003-attributes.sh @@ -20,8 +20,12 @@ test_expect_success 'setup' ' mkdir -p a/b/d a/c && ( + echo "[attr]notest !test" echo "f test=f" echo "a/i test=a/i" + echo "onoff test -test" + echo "offon -test test" + echo "no notest" ) >.gitattributes && ( echo "g test=a/g" && @@ -30,6 +34,7 @@ test_expect_success 'setup' ' ( echo "h test=a/b/h" && echo "d/* test=a/b/d/*" + echo "d/yes notest" ) >a/b/.gitattributes ' @@ -44,6 +49,11 @@ test_expect_success 'attribute test' ' attr_check b/g unspecified && attr_check a/b/h a/b/h && attr_check a/b/d/g "a/b/d/*" + attr_check onoff unset + attr_check offon set + attr_check no unspecified + attr_check a/b/d/no "a/b/d/*" + attr_check a/b/d/yes unspecified ' @@ -58,6 +68,11 @@ a/b/g: test: a/b/g b/g: test: unspecified a/b/h: test: a/b/h a/b/d/g: test: a/b/d/* +onoff: test: unset +offon: test: set +no: test: unspecified +a/b/d/no: test: a/b/d/* +a/b/d/yes: test: unspecified EOF sed -e "s/:.*//" < expect | git check-attr --stdin test > actual && diff --git a/t/t1501-worktree.sh b/t/t1501-worktree.sh index 9df301211c..bd8b60732b 100755 --- a/t/t1501-worktree.sh +++ b/t/t1501-worktree.sh @@ -30,6 +30,7 @@ test_rev_parse() { EMPTY_TREE=$(git write-tree) mkdir -p work/sub/dir || exit 1 +mkdir -p work2 || exit 1 mv .git repo.git || exit 1 say "core.worktree = relative path" @@ -54,7 +55,9 @@ GIT_DIR=$(pwd)/repo.git GIT_CONFIG=$GIT_DIR/config git config core.worktree "$(pwd)/work" test_rev_parse 'outside' false false false -cd work || exit 1 +cd work2 +test_rev_parse 'outside2' false false false +cd ../work || exit 1 test_rev_parse 'inside' false false true '' cd sub/dir || exit 1 test_rev_parse 'subdirectory' false false true sub/dir/ @@ -67,7 +70,9 @@ git config core.worktree non-existent GIT_WORK_TREE=work export GIT_WORK_TREE test_rev_parse 'outside' false false false -cd work || exit 1 +cd work2 +test_rev_parse 'outside' false false false +cd ../work || exit 1 GIT_WORK_TREE=. test_rev_parse 'inside' false false true '' cd sub/dir || exit 1 @@ -76,6 +81,7 @@ test_rev_parse 'subdirectory' false false true sub/dir/ cd ../../.. || exit 1 mv work repo.git/work +mv work2 repo.git/work2 say "GIT_WORK_TREE=absolute path, work tree below git dir" GIT_DIR=$(pwd)/repo.git @@ -86,6 +92,8 @@ cd repo.git || exit 1 test_rev_parse 'in repo.git' false true false cd objects || exit 1 test_rev_parse 'in repo.git/objects' false true false +cd ../work2 || exit 1 +test_rev_parse 'in repo.git/work2' false true false cd ../work || exit 1 test_rev_parse 'in repo.git/work' false true true '' cd sub/dir || exit 1 diff --git a/t/t4201-shortlog.sh b/t/t4201-shortlog.sh index a01e55bf6b..cdb70b4b33 100755 --- a/t/t4201-shortlog.sh +++ b/t/t4201-shortlog.sh @@ -8,30 +8,93 @@ test_description='git shortlog . ./test-lib.sh -echo 1 > a1 -git add a1 -tree=$(git write-tree) -commit=$( (echo "Test"; echo) | git commit-tree $tree ) -git update-ref HEAD $commit +test_expect_success 'setup' ' + echo 1 >a1 && + git add a1 && + tree=$(git write-tree) && + commit=$(printf "%s\n" "Test" "" | git commit-tree "$tree") && + git update-ref HEAD "$commit" && + + echo 2 >a1 && + git commit --quiet -m "This is a very, very long first line for the commit message to see if it is wrapped correctly" a1 && + + # test if the wrapping is still valid + # when replacing all is by treble clefs. + echo 3 >a1 && + git commit --quiet -m "$( + echo "This is a very, very long first line for the commit message to see if it is wrapped correctly" | + sed "s/i/1234/g" | + tr 1234 "\360\235\204\236")" a1 && + + # now fsck up the utf8 + git config i18n.commitencoding non-utf-8 && + echo 4 >a1 && + git commit --quiet -m "$( + echo "This is a very, very long first line for the commit message to see if it is wrapped correctly" | + sed "s/i/1234/g" | + tr 1234 "\370\235\204\236")" a1 && + + echo 5 >a1 && + git commit --quiet -m "a 12 34 56 78" a1 + + echo 6 >a1 && + git commit --quiet -m "Commit by someone else" \ + --author="Someone else <not!me>" a1 && + + cat >expect.template <<-\EOF + A U Thor (5): + SUBJECT + SUBJECT + SUBJECT + SUBJECT + SUBJECT + + Someone else (1): + SUBJECT + + EOF +' -echo 2 > a1 -git commit --quiet -m "This is a very, very long first line for the commit message to see if it is wrapped correctly" a1 +fuzz() { + file=$1 && + sed " + s/$_x40/OBJECT_NAME/g + s/$_x05/OBJID/g + s/^ \{6\}[CTa].*/ SUBJECT/g + s/^ \{8\}[^ ].*/ CONTINUATION/g + " <"$file" >"$file.fuzzy" && + sed "/CONTINUATION/ d" <"$file.fuzzy" +} -# test if the wrapping is still valid when replacing all i's by treble clefs. -echo 3 > a1 -git commit --quiet -m "$(echo "This is a very, very long first line for the commit message to see if it is wrapped correctly" | sed "s/i/1234/g" | tr 1234 '\360\235\204\236')" a1 +test_expect_success 'default output format' ' + git shortlog HEAD >log && + fuzz log >log.predictable && + test_cmp expect.template log.predictable +' -# now fsck up the utf8 -git config i18n.commitencoding non-utf-8 -echo 4 > a1 -git commit --quiet -m "$(echo "This is a very, very long first line for the commit message to see if it is wrapped correctly" | sed "s/i/1234/g" | tr 1234 '\370\235\204\236')" a1 +test_expect_success 'pretty format' ' + sed s/SUBJECT/OBJECT_NAME/ expect.template >expect && + git shortlog --format="%H" HEAD >log && + fuzz log >log.predictable && + test_cmp expect log.predictable +' -echo 5 > a1 -git commit --quiet -m "a 12 34 56 78" a1 +test_expect_success '--abbrev' ' + sed s/SUBJECT/OBJID/ expect.template >expect && + git shortlog --format="%h" --abbrev=5 HEAD >log && + fuzz log >log.predictable && + test_cmp expect log.predictable +' -git shortlog -w HEAD > out +test_expect_success 'output from user-defined format is re-wrapped' ' + sed "s/SUBJECT/two lines/" expect.template >expect && + git shortlog --format="two%nlines" HEAD >log && + fuzz log >log.predictable && + test_cmp expect log.predictable +' -cat > expect << EOF +test_expect_success 'shortlog wrapping' ' + cat >expect <<\EOF && A U Thor (5): Test This is a very, very long first line for the commit message to see if @@ -43,14 +106,19 @@ A U Thor (5): a 12 34 56 78 -EOF - -test_expect_success 'shortlog wrapping' 'test_cmp expect out' +Someone else (1): + Commit by someone else -git log HEAD > log -GIT_DIR=non-existing git shortlog -w < log > out +EOF + git shortlog -w HEAD >out && + test_cmp expect out +' -test_expect_success 'shortlog from non-git directory' 'test_cmp expect out' +test_expect_success 'shortlog from non-git directory' ' + git log HEAD >log && + GIT_DIR=non-existing git shortlog -w <log >out && + test_cmp expect out +' iconvfromutf8toiso88591() { printf "%s" "$*" | iconv -f UTF-8 -t ISO8859-1 diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 2de98e6561..6a37a4d993 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -528,7 +528,7 @@ test_expect_success 'push does not update local refs on failure' ' mk_test heads/master && mk_child child && mkdir testrepo/.git/hooks && - echo exit 1 >testrepo/.git/hooks/pre-receive && + echo "#!/no/frobnication/today" >testrepo/.git/hooks/pre-receive && chmod +x testrepo/.git/hooks/pre-receive && (cd child && git pull .. master diff --git a/t/t5541-http-push.sh b/t/t5541-http-push.sh index 795dc2bcdf..17e1bdc5a8 100755 --- a/t/t5541-http-push.sh +++ b/t/t5541-http-push.sh @@ -34,8 +34,34 @@ test_expect_success 'setup remote repository' ' mv test_repo.git "$HTTPD_DOCUMENT_ROOT_PATH" ' -test_expect_success 'clone remote repository' ' +cat >exp <<EOF +GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 +POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200 +EOF +test_expect_success 'no empty path components' ' + # In the URL, add a trailing slash, and see if git appends yet another + # slash. cd "$ROOT_PATH" && + git clone $HTTPD_URL/smart/test_repo.git/ test_repo_clone && + + sed -e " + s/^.* \"// + s/\"// + s/ [1-9][0-9]*\$// + s/^GET /GET / + " >act <"$HTTPD_ROOT_PATH"/access.log && + + # Clear the log, so that it does not affect the "used receive-pack + # service" test which reads the log too. + # + # We do this before the actual comparison to ensure the log is cleared. + echo > "$HTTPD_ROOT_PATH"/access.log && + + test_cmp exp act +' + +test_expect_success 'clone remote repository' ' + rm -rf test_repo_clone && git clone $HTTPD_URL/smart/test_repo.git test_repo_clone ' @@ -68,6 +94,7 @@ test_expect_success 'create and delete remote branch' ' ' cat >exp <<EOF + GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200 GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200 diff --git a/t/t5550-http-fetch.sh b/t/t5550-http-fetch.sh index 8cfce969bc..fc675b50ad 100755 --- a/t/t5550-http-fetch.sh +++ b/t/t5550-http-fetch.sh @@ -55,12 +55,43 @@ test_expect_success 'http remote detects correct HEAD' ' test_expect_success 'fetch packed objects' ' cp -R "$HTTPD_DOCUMENT_ROOT_PATH"/repo.git "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git && - cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git && - git --bare repack && - git --bare prune-packed && + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git && + git --bare repack && + git --bare prune-packed + ) && git clone $HTTPD_URL/dumb/repo_pack.git ' +test_expect_success 'fetch notices corrupt pack' ' + cp -R "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad1.git && + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad1.git && + p=`ls objects/pack/pack-*.pack` && + chmod u+w $p && + printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc + ) && + mkdir repo_bad1.git && + (cd repo_bad1.git && + git --bare init && + test_must_fail git --bare fetch $HTTPD_URL/dumb/repo_bad1.git && + test 0 = `ls objects/pack/pack-*.pack | wc -l` + ) +' + +test_expect_success 'fetch notices corrupt idx' ' + cp -R "$HTTPD_DOCUMENT_ROOT_PATH"/repo_pack.git "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad2.git && + (cd "$HTTPD_DOCUMENT_ROOT_PATH"/repo_bad2.git && + p=`ls objects/pack/pack-*.idx` && + chmod u+w $p && + printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc + ) && + mkdir repo_bad2.git && + (cd repo_bad2.git && + git --bare init && + test_must_fail git --bare fetch $HTTPD_URL/dumb/repo_bad2.git && + test 0 = `ls objects/pack | wc -l` + ) +' + test_expect_success 'did not use upload-pack service' ' grep '/git-upload-pack' <"$HTTPD_ROOT_PATH"/access.log >act : >exp diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 214756731b..678cee502d 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -34,7 +34,7 @@ test_expect_success 'clone with excess parameters (2)' ' test_expect_success 'output from clone' ' rm -fr dst && git clone -n "file://$(pwd)/src" dst >output && - test $(grep Initialized output | wc -l) = 1 + test $(grep Clon output | wc -l) = 1 ' test_expect_success 'clone does not keep pack' ' diff --git a/t/t5704-bundle.sh b/t/t5704-bundle.sh index a8f4419e61..ddc3dc52f4 100755 --- a/t/t5704-bundle.sh +++ b/t/t5704-bundle.sh @@ -30,4 +30,20 @@ test_expect_success 'tags can be excluded by rev-list options' ' ' +test_expect_failure 'bundle --stdin' ' + + echo master | git bundle create stdin-bundle.bdl --stdin && + git ls-remote stdin-bundle.bdl >output && + grep master output + +' + +test_expect_failure 'bundle --stdin <rev-list options>' ' + + echo master | git bundle create hybrid-bundle.bdl --stdin tag && + git ls-remote hybrid-bundle.bdl >output && + grep master output + +' + test_done diff --git a/t/t5705-clone-2gb.sh b/t/t5705-clone-2gb.sh index adfaae8c5b..8afbdd4de2 100755 --- a/t/t5705-clone-2gb.sh +++ b/t/t5705-clone-2gb.sh @@ -12,7 +12,7 @@ test_expect_success 'setup' ' git config pack.compression 0 && git config pack.depth 0 && - blobsize=$((20*1024*1024)) && + blobsize=$((100*1024*1024)) && blobcount=$((2*1024*1024*1024/$blobsize+1)) && i=1 && (while test $i -le $blobcount @@ -36,9 +36,15 @@ test_expect_success 'setup' ' ' -test_expect_success 'clone' ' +test_expect_success 'clone - bare' ' - git clone --bare --no-hardlinks . clone + git clone --bare --no-hardlinks . clone-bare + +' + +test_expect_success 'clone - with worktree, file:// protocol' ' + + git clone file://. clone-wt ' diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index a49b7c5722..e8fde5c19c 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -191,6 +191,31 @@ test_expect_success 'add LF before non-empty (2)' ' grep "^$" actual ' +test_expect_success '--abbrev' ' + echo SHORT SHORT SHORT >expect2 && + echo LONG LONG LONG >expect3 && + git log -1 --format="%h %h %h" HEAD >actual1 && + git log -1 --abbrev=5 --format="%h %h %h" HEAD >actual2 && + git log -1 --abbrev=5 --format="%H %H %H" HEAD >actual3 && + sed -e "s/$_x40/LONG/g" -e "s/$_x05/SHORT/g" <actual2 >fuzzy2 && + sed -e "s/$_x40/LONG/g" -e "s/$_x05/SHORT/g" <actual3 >fuzzy3 && + test_cmp expect2 fuzzy2 && + test_cmp expect3 fuzzy3 && + ! test_cmp actual1 actual2 +' + +test_expect_success '%H is not affected by --abbrev-commit' ' + git log -1 --format=%H --abbrev-commit --abbrev=20 HEAD >actual && + len=$(wc -c <actual) && + test $len = 41 +' + +test_expect_success '%h is not affected by --abbrev-commit' ' + git log -1 --format=%h --abbrev-commit --abbrev=20 HEAD >actual && + len=$(wc -c <actual) && + test $len = 21 +' + test_expect_success '"%h %gD: %gs" is same as git-reflog' ' git reflog >expect && git log -g --format="%h %gD: %gs" >actual && @@ -203,6 +228,12 @@ test_expect_success '"%h %gD: %gs" is same as git-reflog (with date)' ' test_cmp expect actual ' +test_expect_success '"%h %gD: %gs" is same as git-reflog (with --abbrev)' ' + git reflog --abbrev=13 --date=raw >expect && + git log -g --abbrev=13 --format="%h %gD: %gs" --date=raw >actual && + test_cmp expect actual +' + test_expect_success '%gd shortens ref name' ' echo "master@{0}" >expect.gd-short && git log -g -1 --format=%gd refs/heads/master >actual.gd-short && diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index 065deadc29..876d1ab743 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -8,7 +8,7 @@ test_description='test describe o----o----o----o----o----. / \ A c / .------------o---o---o - D e + D,R e ' . ./test-lib.sh @@ -68,6 +68,8 @@ test_expect_success setup ' echo D >another && git add another && git commit -m D && test_tick && git tag -a -m D D && + test_tick && + git tag -a -m R R && test_tick && echo DD >another && git commit -a -m another && @@ -89,10 +91,10 @@ test_expect_success setup ' check_describe A-* HEAD check_describe A-* HEAD^ -check_describe D-* HEAD^^ +check_describe R-* HEAD^^ check_describe A-* HEAD^^2 check_describe B HEAD^^2^ -check_describe D-* HEAD^^^ +check_describe R-* HEAD^^^ check_describe c-* --tags HEAD check_describe c-* --tags HEAD^ diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index d9202d5af5..3bc7a2a796 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -4,17 +4,24 @@ test_description='Test automatic use of a pager.' . ./test-lib.sh -rm -f stdout_is_tty +cleanup_fail() { + echo >&2 cleanup failed + (exit 1) +} + test_expect_success 'set up terminal for tests' ' + rm -f stdout_is_tty || + cleanup_fail && + if test -t 1 then - : > stdout_is_tty + >stdout_is_tty elif test_have_prereq PERL && "$PERL_PATH" "$TEST_DIRECTORY"/t7006/test-terminal.perl \ sh -c "test -t 1" then - : > test_terminal_works + >test_terminal_works fi ' @@ -32,53 +39,68 @@ else say no usable terminal, so skipping some tests fi -unset GIT_PAGER GIT_PAGER_IN_USE -git config --unset core.pager -PAGER='cat > paginated.out' -export PAGER - test_expect_success 'setup' ' + unset GIT_PAGER GIT_PAGER_IN_USE && + test_might_fail git config --unset core.pager && + + PAGER="cat >paginated.out" && + export PAGER && + test_commit initial ' -rm -f paginated.out test_expect_success TTY 'some commands use a pager' ' + rm -f paginated.out || + cleanup_fail && + test_terminal git log && test -e paginated.out ' -rm -f paginated.out test_expect_success TTY 'some commands do not use a pager' ' + rm -f paginated.out || + cleanup_fail && + test_terminal git rev-list HEAD && ! test -e paginated.out ' -rm -f paginated.out test_expect_success 'no pager when stdout is a pipe' ' + rm -f paginated.out || + cleanup_fail && + git log | cat && ! test -e paginated.out ' -rm -f paginated.out test_expect_success 'no pager when stdout is a regular file' ' - git log > file && + rm -f paginated.out || + cleanup_fail && + + git log >file && ! test -e paginated.out ' -rm -f paginated.out test_expect_success TTY 'git --paginate rev-list uses a pager' ' + rm -f paginated.out || + cleanup_fail && + test_terminal git --paginate rev-list HEAD && test -e paginated.out ' -rm -f file paginated.out test_expect_success 'no pager even with --paginate when stdout is a pipe' ' + rm -f file paginated.out || + cleanup_fail && + git --paginate log | cat && ! test -e paginated.out ' -rm -f paginated.out test_expect_success TTY 'no pager with --no-pager' ' + rm -f paginated.out || + cleanup_fail && + test_terminal git --no-pager log && ! test -e paginated.out ' @@ -86,88 +108,119 @@ test_expect_success TTY 'no pager with --no-pager' ' # A colored commit log will begin with an appropriate ANSI escape # for the first color; the text "commit" comes later. colorful() { - read firstline < $1 + read firstline <$1 ! expr "$firstline" : "^[a-zA-Z]" >/dev/null } -rm -f colorful.log colorless.log test_expect_success 'tests can detect color' ' - git log --no-color > colorless.log && - git log --color > colorful.log && + rm -f colorful.log colorless.log || + cleanup_fail && + + git log --no-color >colorless.log && + git log --color >colorful.log && ! colorful colorless.log && colorful colorful.log ' -rm -f colorless.log -git config color.ui auto test_expect_success 'no color when stdout is a regular file' ' - git log > colorless.log && + rm -f colorless.log && + git config color.ui auto || + cleanup_fail && + + git log >colorless.log && ! colorful colorless.log ' -rm -f paginated.out -git config color.ui auto test_expect_success TTY 'color when writing to a pager' ' - TERM=vt100 test_terminal git log && + rm -f paginated.out && + git config color.ui auto || + cleanup_fail && + + ( + TERM=vt100 && + export TERM && + test_terminal git log + ) && colorful paginated.out ' -rm -f colorful.log -git config color.ui auto test_expect_success 'color when writing to a file intended for a pager' ' - TERM=vt100 GIT_PAGER_IN_USE=true git log > colorful.log && + rm -f colorful.log && + git config color.ui auto || + cleanup_fail && + + ( + TERM=vt100 && + GIT_PAGER_IN_USE=true && + export TERM GIT_PAGER_IN_USE && + git log >colorful.log + ) && colorful colorful.log ' -unset PAGER GIT_PAGER -git config --unset core.pager test_expect_success 'determine default pager' ' + unset PAGER GIT_PAGER && + test_might_fail git config --unset core.pager || + cleanup_fail && + less=$(git var GIT_PAGER) && test -n "$less" ' -if expr "$less" : '^[a-z]*$' > /dev/null && test_have_prereq TTY +if expr "$less" : '^[a-z][a-z]*$' >/dev/null && test_have_prereq TTY then test_set_prereq SIMPLEPAGER fi -unset PAGER GIT_PAGER -git config --unset core.pager -rm -f default_pager_used test_expect_success SIMPLEPAGER 'default pager is used by default' ' - cat > $less <<-EOF && - #!$SHELL_PATH - wc > default_pager_used + unset PAGER GIT_PAGER && + test_might_fail git config --unset core.pager && + rm -f default_pager_used || + cleanup_fail && + + cat >$less <<-\EOF && + #!/bin/sh + wc >default_pager_used EOF chmod +x $less && - PATH=.:$PATH test_terminal git log && + ( + PATH=.:$PATH && + export PATH && + test_terminal git log + ) && test -e default_pager_used ' -unset GIT_PAGER -git config --unset core.pager -rm -f PAGER_used test_expect_success TTY 'PAGER overrides default pager' ' - PAGER="wc > PAGER_used" && + unset GIT_PAGER && + test_might_fail git config --unset core.pager && + rm -f PAGER_used || + cleanup_fail && + + PAGER="wc >PAGER_used" && export PAGER && test_terminal git log && test -e PAGER_used ' -unset GIT_PAGER -rm -f core.pager_used test_expect_success TTY 'core.pager overrides PAGER' ' + unset GIT_PAGER && + rm -f core.pager_used || + cleanup_fail && + PAGER=wc && export PAGER && - git config core.pager "wc > core.pager_used" && + git config core.pager "wc >core.pager_used" && test_terminal git log && test -e core.pager_used ' -rm -f GIT_PAGER_used test_expect_success TTY 'GIT_PAGER overrides core.pager' ' + rm -f GIT_PAGER_used || + cleanup_fail && + git config core.pager wc && - GIT_PAGER="wc > GIT_PAGER_used" && + GIT_PAGER="wc >GIT_PAGER_used" && export GIT_PAGER && test_terminal git log && test -e GIT_PAGER_used diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 844fb43c6d..95044668ee 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -35,7 +35,7 @@ test_expect_success 'partial' ' ' -test_expect_success 'partial modification in a subdirecotry' ' +test_expect_success 'partial modification in a subdirectory' ' test_tick && git commit -m "partial commit to subdirectory" not && diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 1301ec87e9..008d5711b8 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -541,6 +541,16 @@ test_expect_success 'dry-run of partial commit excluding new file in index' ' test_cmp expect output ' +cat >expect <<EOF +:100644 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0000000000000000000000000000000000000000 M dir1/modified +EOF +test_expect_success 'status refreshes the index' ' + touch dir2/added && + git status && + git diff-files >output && + test_cmp expect output +' + test_expect_success 'setup status submodule summary' ' test_create_repo sm && ( cd sm && @@ -738,4 +748,19 @@ test_expect_success 'commit --dry-run submodule summary (--amend)' ' test_cmp expect output ' +test_expect_success POSIXPERM 'status succeeds in a read-only repository' ' + ( + chmod a-w .git && + # make dir1/tracked stat-dirty + >dir1/tracked1 && mv -f dir1/tracked1 dir1/tracked && + git status -s >output && + ! grep dir1/tracked output && + # make sure "status" succeeded without writing index out + git diff-files | grep dir1/tracked + ) + status=$? + chmod 775 .git + (exit $status) +' + test_done diff --git a/t/test-lib.sh b/t/test-lib.sh index c582964b0d..9bfa14be7f 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -2,6 +2,18 @@ # # Copyright (c) 2005 Junio C Hamano # +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/ . # if --tee was passed, write the output not only to the terminal, but # additionally to the file test-results/$BASENAME.out, too. @@ -354,8 +366,10 @@ test_debug () { } test_run_ () { + test_cleanup=: eval >&3 2>&4 "$1" - eval_ret="$?" + eval_ret=$? + eval >&3 2>&4 "$test_cleanup" return 0 } @@ -516,6 +530,22 @@ test_must_fail () { test $? -gt 0 -a $? -le 129 -o $? -gt 192 } +# Similar to test_must_fail, but tolerates success, too. This is +# meant to be used in contexts like: +# +# test_expect_success 'some command works without configuration' ' +# test_might_fail git config --unset all.configuration && +# do something +# ' +# +# Writing "git config --unset all.configuration || :" would be wrong, +# because we want to notice if it fails due to segv. + +test_might_fail () { + "$@" + test $? -ge 0 -a $? -le 129 -o $? -gt 192 +} + # test_cmp is a helper function to compare actual and expected output. # You can use it like: # @@ -533,6 +563,31 @@ test_cmp() { $GIT_TEST_CMP "$@" } +# This function can be used to schedule some commands to be run +# unconditionally at the end of the test to restore sanity: +# +# test_expect_success 'test core.capslock' ' +# git config core.capslock true && +# test_when_finished "git config --unset core.capslock" && +# hello world +# ' +# +# That would be roughly equivalent to +# +# test_expect_success 'test core.capslock' ' +# git config core.capslock true && +# hello world +# git config --unset core.capslock +# ' +# +# except that the greeting and config --unset must both succeed for +# the test to pass. + +test_when_finished () { + test_cleanup="{ $* + } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" +} + # Most tests can use the created repository, but some may need to create more. # Usage: test_create_repo <directory> test_create_repo () { |