diff options
Diffstat (limited to 't')
338 files changed, 15295 insertions, 2944 deletions
@@ -84,9 +84,10 @@ appropriately before running "make". -x:: Turn on shell tracing (i.e., `set -x`) during the tests - themselves. Implies `--verbose`. Note that in non-bash shells, - this can cause failures in some tests which redirect and test - the output of shell functions. Use with caution. + themselves. Implies `--verbose`. + Ignored in test scripts that set the variable 'test_untraceable' + to a non-empty value, unless it's run with a Bash version + supporting BASH_XTRACEFD, i.e. v4.1 or later. -d:: --debug:: @@ -292,6 +293,28 @@ and know what setup is needed for it. Or when you want to run everything up to a certain test. +Running tests with special setups +--------------------------------- + +The whole test suite could be run to test some special features +that cannot be easily covered by a few specific test cases. These +could be enabled by running the test suite with correct GIT_TEST_ +environment set. + +GIT_TEST_SPLIT_INDEX=<boolean> forces split-index mode on the whole +test suite. Accept any boolean values that are accepted by git-config. + +GIT_TEST_FULL_IN_PACK_ARRAY=<boolean> exercises the uncommon +pack-objects code path where there are more than 1024 packs even if +the actual number of packs in repository is below this limit. Accept +any boolean values that are accepted by git-config. + +GIT_TEST_OE_SIZE=<n> exercises the uncommon pack-objects code path +where we do not cache object size in memory and read it from existing +packs on demand. This normally only happens when the object size is +over 2GB. This variable forces the code path on any object larger than +<n> bytes. + Naming Tests ------------ @@ -452,6 +475,22 @@ Don't: causing the next test to start in an unexpected directory. Do so inside a subshell if necessary. + - save and verify the standard error of compound commands, i.e. group + commands, subshells, and shell functions (except test helper + functions like 'test_must_fail') like this: + + ( cd dir && git cmd ) 2>error && + test_cmp expect error + + When running the test with '-x' tracing, then the trace of commands + executed in the compound command will be included in standard error + as well, quite possibly throwing off the subsequent checks examining + the output. Instead, save only the relevant git command's standard + error: + + ( cd dir && git cmd 2>../error ) && + test_cmp expect error + - Break the TAP output The raw output from your test may be interpreted by a TAP harness. TAP diff --git a/t/check-non-portable-shell.pl b/t/check-non-portable-shell.pl index e07f028437..d5823f71d8 100755 --- a/t/check-non-portable-shell.pl +++ b/t/check-non-portable-shell.pl @@ -7,22 +7,43 @@ use strict; use warnings; my $exit_code=0; +my %func; sub err { my $msg = shift; + s/^\s+//; + s/\s+$//; + s/\s+/ /g; print "$ARGV:$.: error: $msg: $_\n"; $exit_code = 1; } +# glean names of shell functions +for my $i (@ARGV) { + open(my $f, '<', $i) or die "$0: $i: $!\n"; + while (<$f>) { + $func{$1} = 1 if /^\s*(\w+)\s*\(\)\s*{\s*$/; + } + close $f; +} + while (<>) { chomp; + # stitch together incomplete lines (those ending with "\") + while (s/\\$//) { + $_ .= readline; + chomp; + } + /\bsed\s+-i/ and err 'sed -i is not portable'; - /\becho\s+-[neE]/ and err 'echo with option is not portable (please use printf)'; + /\becho\s+-[neE]/ and err 'echo with option is not portable (use printf)'; /^\s*declare\s+/ and err 'arrays/declare not portable'; - /^\s*[^#]\s*which\s/ and err 'which is not portable (please use type)'; - /\btest\s+[^=]*==/ and err '"test a == b" is not portable (please use =)'; - /\bwc -l.*"\s*=/ and err '`"$(wc -l)"` is not portable (please use test_line_count)'; - /\bexport\s+[A-Za-z0-9_]*=/ and err '"export FOO=bar" is not portable (please use FOO=bar && export FOO)'; + /^\s*[^#]\s*which\s/ and err 'which is not portable (use type)'; + /\btest\s+[^=]*==/ and err '"test a == b" is not portable (use =)'; + /\bwc -l.*"\s*=/ and err '`"$(wc -l)"` is not portable (use test_line_count)'; + /\bexport\s+[A-Za-z0-9_]*=/ and err '"export FOO=bar" is not portable (use FOO=bar && export FOO)'; + /^\s*([A-Z0-9_]+=(\w+|(["']).*?\3)\s+)+(\w+)/ and exists($func{$4}) and + err '"FOO=bar shell_func" assignment extends beyond "shell_func"'; # this resets our $. for each file close ARGV if eof; } diff --git a/t/diff-lib.sh b/t/diff-lib.sh index c211dc40ee..2de880f7a5 100644 --- a/t/diff-lib.sh +++ b/t/diff-lib.sh @@ -1,6 +1,6 @@ : -sanitize_diff_raw='/^:/s/ '"\($_x40\)"' '"\($_x40\)"' \([A-Z]\)[0-9]* / \1 \2 \3# /' +sanitize_diff_raw='/^:/s/ '"\($OID_REGEX\)"' '"\($OID_REGEX\)"' \([A-Z]\)[0-9]* / \1 \2 \3# /' compare_diff_raw () { # When heuristics are improved, the score numbers would change. # Ignore them while comparing. @@ -12,7 +12,7 @@ compare_diff_raw () { test_cmp .tmp-1 .tmp-2 && rm -f .tmp-1 .tmp-2 } -sanitize_diff_raw_z='/^:/s/ '"$_x40"' '"$_x40"' \([A-Z]\)[0-9]*$/ X X \1#/' +sanitize_diff_raw_z='/^:/s/ '"$OID_REGEX"' '"$OID_REGEX"' \([A-Z]\)[0-9]*$/ X X \1#/' compare_diff_raw_z () { # When heuristics are improved, the score numbers would change. # Ignore them while comparing. diff --git a/t/helper/test-chmtime.c b/t/helper/test-chmtime.c index e760256406..aa22af48c2 100644 --- a/t/helper/test-chmtime.c +++ b/t/helper/test-chmtime.c @@ -5,32 +5,43 @@ * * The mtime can be changed to an absolute value: * - * test-chmtime =<seconds> file... + * test-tool chmtime =<seconds> file... * * Relative to the current time as returned by time(3): * - * test-chmtime =+<seconds> (or =-<seconds>) file... + * test-tool chmtime =+<seconds> (or =-<seconds>) file... * * Or relative to the current mtime of the file: * - * test-chmtime <seconds> file... - * test-chmtime +<seconds> (or -<seconds>) file... + * test-tool chmtime <seconds> file... + * test-tool chmtime +<seconds> (or -<seconds>) file... * * Examples: * - * To just print the mtime use --verbose and set the file mtime offset to 0: + * To print the mtime and the file name use --verbose and set + * the file mtime offset to 0: * - * test-chmtime -v +0 file + * test-tool chmtime -v +0 file + * + * To print only the mtime use --get: + * + * test-tool chmtime --get file * * To set the mtime to current time: * - * test-chmtime =+0 file + * test-tool chmtime =+0 file + * + * To set the file mtime offset to +1 and print the new value: + * + * test-tool chmtime --get +1 file * */ +#include "test-tool.h" #include "git-compat-util.h" #include <utime.h> -static const char usage_str[] = "-v|--verbose (+|=|=+|=-|-)<seconds> <file>..."; +static const char usage_str[] = + "(-v|--verbose|-g|--get) (+|=|=+|=-|-)<seconds> <file>..."; static int timespec_arg(const char *arg, long int *set_time, int *set_eq) { @@ -46,7 +57,6 @@ static int timespec_arg(const char *arg, long int *set_time, int *set_eq) } *set_time = strtol(timespec, &test, 10); if (*test) { - fprintf(stderr, "Not a base-10 integer: %s\n", arg + 1); return 0; } if ((*set_eq && *set_time < 0) || *set_eq == 2) { @@ -56,9 +66,10 @@ static int timespec_arg(const char *arg, long int *set_time, int *set_eq) return 1; } -int cmd_main(int argc, const char **argv) +int cmd__chmtime(int argc, const char **argv) { static int verbose; + static int get; int i = 1; /* no mtime change by default */ @@ -68,18 +79,34 @@ int cmd_main(int argc, const char **argv) if (argc < 3) goto usage; - if (strcmp(argv[i], "--verbose") == 0 || strcmp(argv[i], "-v") == 0) { + if (strcmp(argv[i], "--get") == 0 || strcmp(argv[i], "-g") == 0) { + get = 1; + ++i; + } else if (strcmp(argv[i], "--verbose") == 0 || strcmp(argv[i], "-v") == 0) { verbose = 1; ++i; } - if (timespec_arg(argv[i], &set_time, &set_eq)) + + if (i == argc) { + goto usage; + } + + if (timespec_arg(argv[i], &set_time, &set_eq)) { ++i; - else + } else { + if (get == 0) { + fprintf(stderr, "Not a base-10 integer: %s\n", argv[i] + 1); + goto usage; + } + } + + if (i == argc) goto usage; for (; i < argc; i++) { struct stat sb; struct utimbuf utb; + uintmax_t mtime; if (stat(argv[i], &sb) < 0) { fprintf(stderr, "Failed to stat %s: %s\n", @@ -99,8 +126,10 @@ int cmd_main(int argc, const char **argv) utb.actime = sb.st_atime; utb.modtime = set_eq ? set_time : sb.st_mtime + set_time; - if (verbose) { - uintmax_t mtime = utb.modtime < 0 ? 0: utb.modtime; + mtime = utb.modtime < 0 ? 0: utb.modtime; + if (get) { + printf("%"PRIuMAX"\n", mtime); + } else if (verbose) { printf("%"PRIuMAX"\t%s\n", mtime, argv[i]); } diff --git a/t/helper/test-config.c b/t/helper/test-config.c index 1a7b8bd3d6..214003d5b2 100644 --- a/t/helper/test-config.c +++ b/t/helper/test-config.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "config.h" #include "string-list.h" @@ -32,7 +33,7 @@ * Examples: * * To print the value with highest priority for key "foo.bAr Baz.rock": - * test-config get_value "foo.bAr Baz.rock" + * test-tool config get_value "foo.bAr Baz.rock" * */ @@ -77,7 +78,7 @@ static int early_config_cb(const char *var, const char *value, void *vdata) return 0; } -int cmd_main(int argc, const char **argv) +int cmd__config(int argc, const char **argv) { int i, val; const char *v; diff --git a/t/helper/test-ctype.c b/t/helper/test-ctype.c index bb72c47df5..92c4c2313e 100644 --- a/t/helper/test-ctype.c +++ b/t/helper/test-ctype.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" static int rc; @@ -28,7 +29,7 @@ static int is_in(const char *s, int ch) #define LOWER "abcdefghijklmnopqrstuvwxyz" #define UPPER "ABCDEFGHIJKLMNOPQRSTUVWXYZ" -int cmd_main(int argc, const char **argv) +int cmd__ctype(int argc, const char **argv) { TEST_CLASS(isdigit, DIGIT); TEST_CLASS(isspace, " \n\r\t"); diff --git a/t/helper/test-date.c b/t/helper/test-date.c index ac83687970..a0837371ab 100644 --- a/t/helper/test-date.c +++ b/t/helper/test-date.c @@ -1,13 +1,14 @@ +#include "test-tool.h" #include "cache.h" static const char *usage_msg = "\n" -" test-date relative [time_t]...\n" -" test-date show:<format> [time_t]...\n" -" test-date parse [date]...\n" -" test-date approxidate [date]...\n" -" test-date timestamp [date]...\n" -" test-date is64bit\n" -" test-date time_t-is64bit\n"; +" test-tool date relative [time_t]...\n" +" test-tool date show:<format> [time_t]...\n" +" test-tool date parse [date]...\n" +" test-tool date approxidate [date]...\n" +" test-tool date timestamp [date]...\n" +" test-tool date is64bit\n" +" test-tool date time_t-is64bit\n"; static void show_relative_dates(const char **argv, struct timeval *now) { @@ -81,7 +82,7 @@ static void parse_approx_timestamp(const char **argv, struct timeval *now) } } -int cmd_main(int argc, const char **argv) +int cmd__date(int argc, const char **argv) { struct timeval now; const char *x; diff --git a/t/helper/test-delta.c b/t/helper/test-delta.c index 591730adc4..34c7259248 100644 --- a/t/helper/test-delta.c +++ b/t/helper/test-delta.c @@ -8,14 +8,15 @@ * published by the Free Software Foundation. */ +#include "test-tool.h" #include "git-compat-util.h" #include "delta.h" #include "cache.h" static const char usage_str[] = - "test-delta (-d|-p) <from_file> <data_file> <out_file>"; + "test-tool delta (-d|-p) <from_file> <data_file> <out_file>"; -int cmd_main(int argc, const char **argv) +int cmd__delta(int argc, const char **argv) { int fd; struct stat st; diff --git a/t/helper/test-drop-caches.c b/t/helper/test-drop-caches.c index bd1a857d52..d6bcfddf13 100644 --- a/t/helper/test-drop-caches.c +++ b/t/helper/test-drop-caches.c @@ -1,6 +1,8 @@ +#include "test-tool.h" #include "git-compat-util.h" #if defined(GIT_WINDOWS_NATIVE) +#include "lazyload.h" static int cmd_sync(void) { @@ -81,8 +83,7 @@ static int cmd_dropcaches(void) { HANDLE hProcess = GetCurrentProcess(); HANDLE hToken; - HMODULE ntdll; - DWORD(WINAPI *NtSetSystemInformation)(INT, PVOID, ULONG); + DECLARE_PROC_ADDR(ntdll.dll, DWORD, NtSetSystemInformation, INT, PVOID, ULONG); SYSTEM_MEMORY_LIST_COMMAND command; int status; @@ -94,14 +95,8 @@ static int cmd_dropcaches(void) CloseHandle(hToken); - ntdll = LoadLibrary("ntdll.dll"); - if (!ntdll) - return error("Can't load ntdll.dll, wrong Windows version?"); - - NtSetSystemInformation = - (DWORD(WINAPI *)(INT, PVOID, ULONG))GetProcAddress(ntdll, "NtSetSystemInformation"); - if (!NtSetSystemInformation) - return error("Can't get function addresses, wrong Windows version?"); + if (!INIT_PROC_ADDR(NtSetSystemInformation)) + return error("Could not find NtSetSystemInformation() function"); command = MemoryPurgeStandbyList; status = NtSetSystemInformation( @@ -114,8 +109,6 @@ static int cmd_dropcaches(void) else if (status != STATUS_SUCCESS) error("Unable to execute the memory list command %d", status); - FreeLibrary(ntdll); - return status; } @@ -157,7 +150,7 @@ static int cmd_dropcaches(void) #endif -int cmd_main(int argc, const char **argv) +int cmd__drop_caches(int argc, const char **argv) { cmd_sync(); return cmd_dropcaches(); diff --git a/t/helper/test-dump-cache-tree.c b/t/helper/test-dump-cache-tree.c index ebf3aab22d..98a4891f1d 100644 --- a/t/helper/test-dump-cache-tree.c +++ b/t/helper/test-dump-cache-tree.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "tree.h" #include "cache-tree.h" @@ -54,7 +55,7 @@ static int dump_cache_tree(struct cache_tree *it, return errs; } -int cmd_main(int ac, const char **av) +int cmd__dump_cache_tree(int ac, const char **av) { struct index_state istate; struct cache_tree *another = cache_tree(); diff --git a/t/helper/test-dump-split-index.c b/t/helper/test-dump-split-index.c index e44430b699..63c689d6ee 100644 --- a/t/helper/test-dump-split-index.c +++ b/t/helper/test-dump-split-index.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "split-index.h" #include "ewah/ewok.h" @@ -7,19 +8,19 @@ static void show_bit(size_t pos, void *data) printf(" %d", (int)pos); } -int cmd_main(int ac, const char **av) +int cmd__dump_split_index(int ac, const char **av) { struct split_index *si; int i; do_read_index(&the_index, av[1], 1); - printf("own %s\n", sha1_to_hex(the_index.sha1)); + printf("own %s\n", oid_to_hex(&the_index.oid)); si = the_index.split_index; if (!si) { printf("not a split index\n"); return 0; } - printf("base %s\n", sha1_to_hex(si->base_sha1)); + printf("base %s\n", oid_to_hex(&si->base_oid)); for (i = 0; i < the_index.cache_nr; i++) { struct cache_entry *ce = the_index.cache[i]; printf("%06o %s %d\t%s\n", ce->ce_mode, diff --git a/t/helper/test-dump-untracked-cache.c b/t/helper/test-dump-untracked-cache.c index f752532ffb..bd92fb305a 100644 --- a/t/helper/test-dump-untracked-cache.c +++ b/t/helper/test-dump-untracked-cache.c @@ -23,7 +23,7 @@ static void dump(struct untracked_cache_dir *ucd, struct strbuf *base) len = base->len; strbuf_addf(base, "%s/", ucd->name); printf("%s %s", base->buf, - sha1_to_hex(ucd->exclude_sha1)); + oid_to_hex(&ucd->exclude_oid)); if (ucd->recurse) fputs(" recurse", stdout); if (ucd->check_only) @@ -54,8 +54,8 @@ int cmd_main(int ac, const char **av) printf("no untracked cache\n"); return 0; } - printf("info/exclude %s\n", sha1_to_hex(uc->ss_info_exclude.sha1)); - printf("core.excludesfile %s\n", sha1_to_hex(uc->ss_excludes_file.sha1)); + printf("info/exclude %s\n", oid_to_hex(&uc->ss_info_exclude.oid)); + printf("core.excludesfile %s\n", oid_to_hex(&uc->ss_excludes_file.oid)); printf("exclude_per_dir %s\n", uc->exclude_per_dir); printf("flags %08x\n", uc->dir_flags); if (uc->root) diff --git a/t/helper/test-example-decorate.c b/t/helper/test-example-decorate.c index 90dc97a9d0..a20a6161e4 100644 --- a/t/helper/test-example-decorate.c +++ b/t/helper/test-example-decorate.c @@ -1,8 +1,9 @@ +#include "test-tool.h" #include "cache.h" #include "object.h" #include "decorate.h" -int cmd_main(int argc, const char **argv) +int cmd__example_decorate(int argc, const char **argv) { struct decoration n; struct object_id one_oid = { {1} }; @@ -29,10 +30,10 @@ int cmd_main(int argc, const char **argv) two = lookup_unknown_object(two_oid.hash); ret = add_decoration(&n, one, &decoration_a); if (ret) - die("BUG: when adding a brand-new object, NULL should be returned"); + BUG("when adding a brand-new object, NULL should be returned"); ret = add_decoration(&n, two, NULL); if (ret) - die("BUG: when adding a brand-new object, NULL should be returned"); + BUG("when adding a brand-new object, NULL should be returned"); /* * When re-adding an already existing object, the old decoration is @@ -40,10 +41,10 @@ int cmd_main(int argc, const char **argv) */ ret = add_decoration(&n, one, NULL); if (ret != &decoration_a) - die("BUG: when readding an already existing object, existing decoration should be returned"); + BUG("when readding an already existing object, existing decoration should be returned"); ret = add_decoration(&n, two, &decoration_b); if (ret) - die("BUG: when readding an already existing object, existing decoration should be returned"); + BUG("when readding an already existing object, existing decoration should be returned"); /* * Lookup returns the added declarations, or NULL if the object was @@ -51,14 +52,14 @@ int cmd_main(int argc, const char **argv) */ ret = lookup_decoration(&n, one); if (ret) - die("BUG: lookup should return added declaration"); + BUG("lookup should return added declaration"); ret = lookup_decoration(&n, two); if (ret != &decoration_b) - die("BUG: lookup should return added declaration"); + BUG("lookup should return added declaration"); three = lookup_unknown_object(three_oid.hash); ret = lookup_decoration(&n, three); if (ret) - die("BUG: lookup for unknown object should return NULL"); + BUG("lookup for unknown object should return NULL"); /* * The user can also loop through all entries. @@ -68,7 +69,7 @@ int cmd_main(int argc, const char **argv) objects_noticed++; } if (objects_noticed != 2) - die("BUG: should have 2 objects"); + BUG("should have 2 objects"); return 0; } diff --git a/t/helper/test-genrandom.c b/t/helper/test-genrandom.c index 8d11d22d98..99b8dc1e2d 100644 --- a/t/helper/test-genrandom.c +++ b/t/helper/test-genrandom.c @@ -4,9 +4,10 @@ * Copyright (C) 2007 by Nicolas Pitre, licensed under the GPL version 2. */ +#include "test-tool.h" #include "git-compat-util.h" -int cmd_main(int argc, const char **argv) +int cmd__genrandom(int argc, const char **argv) { unsigned long count, next = 0; unsigned char *c; diff --git a/t/helper/test-hashmap.c b/t/helper/test-hashmap.c index 1145d51671..23d2b172fe 100644 --- a/t/helper/test-hashmap.c +++ b/t/helper/test-hashmap.c @@ -1,5 +1,7 @@ +#include "test-tool.h" #include "git-compat-util.h" #include "hashmap.h" +#include "strbuf.h" struct test_entry { @@ -29,11 +31,12 @@ static int test_entry_cmp(const void *cmp_data, return strcmp(e1->key, key ? key : e2->key); } -static struct test_entry *alloc_test_entry(int hash, char *key, int klen, - char *value, int vlen) +static struct test_entry *alloc_test_entry(unsigned int hash, + char *key, char *value) { - struct test_entry *entry = malloc(sizeof(struct test_entry) + klen - + vlen + 2); + size_t klen = strlen(key); + size_t vlen = strlen(value); + struct test_entry *entry = xmalloc(st_add4(sizeof(*entry), klen, vlen, 2)); hashmap_entry_init(entry, hash); memcpy(entry->key, key, klen + 1); memcpy(entry->key + klen + 1, value, vlen + 1); @@ -75,7 +78,7 @@ static unsigned int hash(unsigned int method, unsigned int i, const char *key) /* * Test performance of hashmap.[ch] - * Usage: time echo "perfhashmap method rounds" | test-hashmap + * Usage: time echo "perfhashmap method rounds" | test-tool hashmap */ static void perf_hashmap(unsigned int method, unsigned int rounds) { @@ -85,11 +88,11 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) unsigned int *hashes; unsigned int i, j; - entries = malloc(TEST_SIZE * sizeof(struct test_entry *)); - hashes = malloc(TEST_SIZE * sizeof(int)); + ALLOC_ARRAY(entries, TEST_SIZE); + ALLOC_ARRAY(hashes, TEST_SIZE); for (i = 0; i < TEST_SIZE; i++) { - snprintf(buf, sizeof(buf), "%i", i); - entries[i] = alloc_test_entry(0, buf, strlen(buf), "", 0); + xsnprintf(buf, sizeof(buf), "%i", i); + entries[i] = alloc_test_entry(0, buf, ""); hashes[i] = hash(method, i, entries[i]->key); } @@ -142,9 +145,9 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) * * perfhashmap method rounds -> test hashmap.[ch] performance */ -int cmd_main(int argc, const char **argv) +int cmd__hashmap(int argc, const char **argv) { - char line[1024]; + struct strbuf line = STRBUF_INIT; struct hashmap map; int icase; @@ -153,44 +156,42 @@ int cmd_main(int argc, const char **argv) hashmap_init(&map, test_entry_cmp, &icase, 0); /* process commands from stdin */ - while (fgets(line, sizeof(line), stdin)) { + while (strbuf_getline(&line, stdin) != EOF) { char *cmd, *p1 = NULL, *p2 = NULL; - int l1 = 0, l2 = 0, hash = 0; + unsigned int hash = 0; struct test_entry *entry; /* break line into command and up to two parameters */ - cmd = strtok(line, DELIM); + cmd = strtok(line.buf, DELIM); /* ignore empty lines */ if (!cmd || *cmd == '#') continue; p1 = strtok(NULL, DELIM); if (p1) { - l1 = strlen(p1); hash = icase ? strihash(p1) : strhash(p1); p2 = strtok(NULL, DELIM); - if (p2) - l2 = strlen(p2); } - if (!strcmp("hash", cmd) && l1) { + if (!strcmp("hash", cmd) && p1) { /* print results of different hash functions */ - printf("%u %u %u %u\n", strhash(p1), memhash(p1, l1), - strihash(p1), memihash(p1, l1)); + printf("%u %u %u %u\n", + strhash(p1), memhash(p1, strlen(p1)), + strihash(p1), memihash(p1, strlen(p1))); - } else if (!strcmp("add", cmd) && l1 && l2) { + } else if (!strcmp("add", cmd) && p1 && p2) { /* create entry with key = p1, value = p2 */ - entry = alloc_test_entry(hash, p1, l1, p2, l2); + entry = alloc_test_entry(hash, p1, p2); /* add to hashmap */ hashmap_add(&map, entry); - } else if (!strcmp("put", cmd) && l1 && l2) { + } else if (!strcmp("put", cmd) && p1 && p2) { /* create entry with key = p1, value = p2 */ - entry = alloc_test_entry(hash, p1, l1, p2, l2); + entry = alloc_test_entry(hash, p1, p2); /* add / replace entry */ entry = hashmap_put(&map, entry); @@ -199,7 +200,7 @@ int cmd_main(int argc, const char **argv) puts(entry ? get_value(entry) : "NULL"); free(entry); - } else if (!strcmp("get", cmd) && l1) { + } else if (!strcmp("get", cmd) && p1) { /* lookup entry in hashmap */ entry = hashmap_get_from_hash(&map, hash, p1); @@ -212,7 +213,7 @@ int cmd_main(int argc, const char **argv) entry = hashmap_get_next(&map, entry); } - } else if (!strcmp("remove", cmd) && l1) { + } else if (!strcmp("remove", cmd) && p1) { /* setup static key */ struct hashmap_entry key; @@ -238,7 +239,7 @@ int cmd_main(int argc, const char **argv) printf("%u %u\n", map.tablesize, hashmap_get_size(&map)); - } else if (!strcmp("intern", cmd) && l1) { + } else if (!strcmp("intern", cmd) && p1) { /* test that strintern works */ const char *i1 = strintern(p1); @@ -252,7 +253,7 @@ int cmd_main(int argc, const char **argv) else printf("%s\n", i1); - } else if (!strcmp("perfhashmap", cmd) && l1 && l2) { + } else if (!strcmp("perfhashmap", cmd) && p1 && p2) { perf_hashmap(atoi(p1), atoi(p2)); @@ -263,6 +264,7 @@ int cmd_main(int argc, const char **argv) } } + strbuf_release(&line); hashmap_free(&map, 1); return 0; } diff --git a/t/helper/test-index-version.c b/t/helper/test-index-version.c index f569f6b7ef..fcd10968cc 100644 --- a/t/helper/test-index-version.c +++ b/t/helper/test-index-version.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int argc, const char **argv) +int cmd__index_version(int argc, const char **argv) { struct cache_header hdr; int version; diff --git a/t/helper/test-lazy-init-name-hash.c b/t/helper/test-lazy-init-name-hash.c index 297fb01d61..b99a37080d 100644 --- a/t/helper/test-lazy-init-name-hash.c +++ b/t/helper/test-lazy-init-name-hash.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "parse-options.h" @@ -184,14 +185,14 @@ static void analyze_run(void) } } -int cmd_main(int argc, const char **argv) +int cmd__lazy_init_name_hash(int argc, const char **argv) { const char *usage[] = { - "test-lazy-init-name-hash -d (-s | -m)", - "test-lazy-init-name-hash -p [-c c]", - "test-lazy-init-name-hash -a a [--step s] [-c c]", - "test-lazy-init-name-hash (-s | -m) [-c c]", - "test-lazy-init-name-hash -s -m [-c c]", + "test-tool lazy-init-name-hash -d (-s | -m)", + "test-tool lazy-init-name-hash -p [-c c]", + "test-tool lazy-init-name-hash -a a [--step s] [-c c]", + "test-tool lazy-init-name-hash (-s | -m) [-c c]", + "test-tool lazy-init-name-hash -s -m [-c c]", NULL }; struct option options[] = { diff --git a/t/helper/test-match-trees.c b/t/helper/test-match-trees.c index 356d8edef1..96857f26ac 100644 --- a/t/helper/test-match-trees.c +++ b/t/helper/test-match-trees.c @@ -1,7 +1,8 @@ +#include "test-tool.h" #include "cache.h" #include "tree.h" -int cmd_main(int ac, const char **av) +int cmd__match_trees(int ac, const char **av) { struct object_id hash1, hash2, shifted; struct tree *one, *two; diff --git a/t/helper/test-mergesort.c b/t/helper/test-mergesort.c index 335cf6b626..c5cffaa4b7 100644 --- a/t/helper/test-mergesort.c +++ b/t/helper/test-mergesort.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "mergesort.h" @@ -22,7 +23,7 @@ static int compare_strings(const void *a, const void *b) return strcmp(x->text, y->text); } -int cmd_main(int argc, const char **argv) +int cmd__mergesort(int argc, const char **argv) { struct line *line, *p = NULL, *lines = NULL; struct strbuf sb = STRBUF_INIT; diff --git a/t/helper/test-mktemp.c b/t/helper/test-mktemp.c index 89d9b2f7be..2290688940 100644 --- a/t/helper/test-mktemp.c +++ b/t/helper/test-mktemp.c @@ -1,9 +1,10 @@ /* * test-mktemp.c: code to exercise the creation of temporary files */ +#include "test-tool.h" #include "git-compat-util.h" -int cmd_main(int argc, const char **argv) +int cmd__mktemp(int argc, const char **argv) { if (argc != 2) usage("Expected 1 parameter defining the temporary file template"); diff --git a/t/helper/test-online-cpus.c b/t/helper/test-online-cpus.c index 06c09c6b88..8cb0d53840 100644 --- a/t/helper/test-online-cpus.c +++ b/t/helper/test-online-cpus.c @@ -1,7 +1,8 @@ +#include "test-tool.h" #include "git-compat-util.h" #include "thread-utils.h" -int cmd_main(int argc, const char **argv) +int cmd__online_cpus(int argc, const char **argv) { printf("%d\n", online_cpus()); return 0; diff --git a/t/helper/test-path-utils.c b/t/helper/test-path-utils.c index 94846550f7..ae091d9b3e 100644 --- a/t/helper/test-path-utils.c +++ b/t/helper/test-path-utils.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "string-list.h" #include "utf8.h" @@ -176,7 +177,7 @@ static int is_dotgitmodules(const char *path) return is_hfs_dotgitmodules(path) || is_ntfs_dotgitmodules(path); } -int cmd_main(int argc, const char **argv) +int cmd__path_utils(int argc, const char **argv) { if (argc == 3 && !strcmp(argv[1], "normalize_path_copy")) { char *buf = xmallocz(strlen(argv[2])); diff --git a/t/helper/test-pkt-line.c b/t/helper/test-pkt-line.c new file mode 100644 index 0000000000..30775f986f --- /dev/null +++ b/t/helper/test-pkt-line.c @@ -0,0 +1,97 @@ +#include "cache.h" +#include "pkt-line.h" + +static void pack_line(const char *line) +{ + if (!strcmp(line, "0000") || !strcmp(line, "0000\n")) + packet_flush(1); + else if (!strcmp(line, "0001") || !strcmp(line, "0001\n")) + packet_delim(1); + else + packet_write_fmt(1, "%s", line); +} + +static void pack(int argc, const char **argv) +{ + if (argc) { /* read from argv */ + int i; + for (i = 0; i < argc; i++) + pack_line(argv[i]); + } else { /* read from stdin */ + char line[LARGE_PACKET_MAX]; + while (fgets(line, sizeof(line), stdin)) { + pack_line(line); + } + } +} + +static void unpack(void) +{ + struct packet_reader reader; + packet_reader_init(&reader, 0, NULL, 0, + PACKET_READ_GENTLE_ON_EOF | + PACKET_READ_CHOMP_NEWLINE); + + while (packet_reader_read(&reader) != PACKET_READ_EOF) { + switch (reader.status) { + case PACKET_READ_EOF: + break; + case PACKET_READ_NORMAL: + printf("%s\n", reader.line); + break; + case PACKET_READ_FLUSH: + printf("0000\n"); + break; + case PACKET_READ_DELIM: + printf("0001\n"); + break; + } + } +} + +static void unpack_sideband(void) +{ + struct packet_reader reader; + packet_reader_init(&reader, 0, NULL, 0, + PACKET_READ_GENTLE_ON_EOF | + PACKET_READ_CHOMP_NEWLINE); + + while (packet_reader_read(&reader) != PACKET_READ_EOF) { + int band; + int fd; + + switch (reader.status) { + case PACKET_READ_EOF: + break; + case PACKET_READ_NORMAL: + band = reader.line[0] & 0xff; + if (band < 1 || band > 2) + die("unexpected side band %d", band); + fd = band; + + write_or_die(fd, reader.line + 1, reader.pktlen - 1); + break; + case PACKET_READ_FLUSH: + return; + case PACKET_READ_DELIM: + break; + } + } +} + +int cmd_main(int argc, const char **argv) +{ + if (argc < 2) + die("too few arguments"); + + if (!strcmp(argv[1], "pack")) + pack(argc - 2, argv + 2); + else if (!strcmp(argv[1], "unpack")) + unpack(); + else if (!strcmp(argv[1], "unpack-sideband")) + unpack_sideband(); + else + die("invalid argument '%s'", argv[1]); + + return 0; +} diff --git a/t/helper/test-prio-queue.c b/t/helper/test-prio-queue.c index ae58fff359..9807b649b1 100644 --- a/t/helper/test-prio-queue.c +++ b/t/helper/test-prio-queue.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "prio-queue.h" @@ -16,7 +17,7 @@ static void show(int *v) free(v); } -int cmd_main(int argc, const char **argv) +int cmd__prio_queue(int argc, const char **argv) { struct prio_queue pq = { intcmp }; diff --git a/t/helper/test-read-cache.c b/t/helper/test-read-cache.c index 48255eef31..d674c88ba0 100644 --- a/t/helper/test-read-cache.c +++ b/t/helper/test-read-cache.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int argc, const char **argv) +int cmd__read_cache(int argc, const char **argv) { int i, cnt = 1; if (argc == 2) diff --git a/t/helper/test-ref-store.c b/t/helper/test-ref-store.c index 7120634b04..e9e0541276 100644 --- a/t/helper/test-ref-store.c +++ b/t/helper/test-ref-store.c @@ -1,6 +1,9 @@ +#include "test-tool.h" #include "cache.h" #include "refs.h" #include "worktree.h" +#include "object-store.h" +#include "repository.h" static const char *notnull(const char *arg, const char *name) { @@ -21,7 +24,7 @@ static const char **get_store(const char **argv, struct ref_store **refs) if (!argv[0]) { die("ref store required"); } else if (!strcmp(argv[0], "main")) { - *refs = get_main_ref_store(); + *refs = get_main_ref_store(the_repository); } else if (skip_prefix(argv[0], "submodule:", &gitdir)) { struct strbuf sb = STRBUF_INIT; int ret; @@ -274,7 +277,7 @@ static struct command commands[] = { { NULL, NULL } }; -int cmd_main(int argc, const char **argv) +int cmd__ref_store(int argc, const char **argv) { struct ref_store *refs; const char *func; diff --git a/t/helper/test-regex.c b/t/helper/test-regex.c index b5ea8a97c5..10284cc56f 100644 --- a/t/helper/test-regex.c +++ b/t/helper/test-regex.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "git-compat-util.h" #include "gettext.h" @@ -36,7 +37,7 @@ static int test_regex_bug(void) return 0; } -int cmd_main(int argc, const char **argv) +int cmd__regex(int argc, const char **argv) { const char *pat; const char *str; @@ -47,8 +48,8 @@ int cmd_main(int argc, const char **argv) if (argc == 2 && !strcmp(argv[1], "--bug")) return test_regex_bug(); else if (argc < 3) - usage("test-regex --bug\n" - "test-regex <pattern> <string> [<options>]"); + usage("test-tool regex --bug\n" + "test-tool regex <pattern> <string> [<options>]"); argv++; pat = *argv++; diff --git a/t/helper/test-revision-walking.c b/t/helper/test-revision-walking.c index b8e6fe1d00..4f8bc75821 100644 --- a/t/helper/test-revision-walking.c +++ b/t/helper/test-revision-walking.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include "test-tool.h" #include "cache.h" #include "commit.h" #include "diff.h" @@ -45,7 +46,7 @@ static int run_revision_walk(void) return got_revision; } -int cmd_main(int argc, const char **argv) +int cmd__revision_walking(int argc, const char **argv) { if (argc < 2) return 1; diff --git a/t/helper/test-run-command.c b/t/helper/test-run-command.c index d24d157379..2cc93bb69c 100644 --- a/t/helper/test-run-command.c +++ b/t/helper/test-run-command.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include "test-tool.h" #include "git-compat-util.h" #include "run-command.h" #include "argv-array.h" @@ -49,13 +50,22 @@ static int task_finished(int result, return 1; } -int cmd_main(int argc, const char **argv) +int cmd__run_command(int argc, const char **argv) { struct child_process proc = CHILD_PROCESS_INIT; int jobs; if (argc < 3) return 1; + while (!strcmp(argv[1], "env")) { + if (!argv[2]) + die("env specifier without a value"); + argv_array_push(&proc.env_array, argv[2]); + argv += 2; + argc -= 2; + } + if (argc < 3) + return 1; proc.argv = (const char **)argv + 2; if (!strcmp(argv[1], "start-command-ENOENT")) { diff --git a/t/helper/test-scrap-cache-tree.c b/t/helper/test-scrap-cache-tree.c index d2a63bea43..393f1604ff 100644 --- a/t/helper/test-scrap-cache-tree.c +++ b/t/helper/test-scrap-cache-tree.c @@ -1,12 +1,13 @@ +#include "test-tool.h" #include "cache.h" #include "lockfile.h" #include "tree.h" #include "cache-tree.h" -static struct lock_file index_lock; - -int cmd_main(int ac, const char **av) +int cmd__scrap_cache_tree(int ac, const char **av) { + struct lock_file index_lock = LOCK_INIT; + setup_git_directory(); hold_locked_index(&index_lock, LOCK_DIE_ON_ERROR); if (read_cache() < 0) diff --git a/t/helper/test-sha1-array.c b/t/helper/test-sha1-array.c index edfd52d82a..ad5e69f9d3 100644 --- a/t/helper/test-sha1-array.c +++ b/t/helper/test-sha1-array.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "sha1-array.h" @@ -7,7 +8,7 @@ static int print_oid(const struct object_id *oid, void *data) return 0; } -int cmd_main(int argc, const char **argv) +int cmd__sha1_array(int argc, const char **argv) { struct oid_array array = OID_ARRAY_INIT; struct strbuf line = STRBUF_INIT; diff --git a/t/helper/test-sha1.c b/t/helper/test-sha1.c index a1c13f54ec..1ba0675c75 100644 --- a/t/helper/test-sha1.c +++ b/t/helper/test-sha1.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int ac, const char **av) +int cmd__sha1(int ac, const char **av) { git_SHA_CTX ctx; unsigned char sha1[20]; diff --git a/t/helper/test-sha1.sh b/t/helper/test-sha1.sh index 750b95a0a1..84594885c7 100755 --- a/t/helper/test-sha1.sh +++ b/t/helper/test-sha1.sh @@ -1,7 +1,7 @@ #!/bin/sh dd if=/dev/zero bs=1048576 count=100 2>/dev/null | -/usr/bin/time t/helper/test-sha1 >/dev/null +/usr/bin/time t/helper/test-tool sha1 >/dev/null while read expect cnt pfx do @@ -11,7 +11,7 @@ do test -z "$pfx" || echo "$pfx" dd if=/dev/zero bs=1048576 count=$cnt 2>/dev/null | perl -pe 'y/\000/g/' - } | ./t/helper/test-sha1 $cnt + } | ./t/helper/test-tool sha1 $cnt ) if test "$expect" = "$actual" then diff --git a/t/helper/test-sigchain.c b/t/helper/test-sigchain.c index b71edbd442..77ac5bc33f 100644 --- a/t/helper/test-sigchain.c +++ b/t/helper/test-sigchain.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "sigchain.h" @@ -13,7 +14,7 @@ X(two) X(three) #undef X -int cmd_main(int argc, const char **argv) { +int cmd__sigchain(int argc, const char **argv) { sigchain_push(SIGTERM, one); sigchain_push(SIGTERM, two); sigchain_push(SIGTERM, three); diff --git a/t/helper/test-strcmp-offset.c b/t/helper/test-strcmp-offset.c index e159c9a127..44e4a6d143 100644 --- a/t/helper/test-strcmp-offset.c +++ b/t/helper/test-strcmp-offset.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int argc, const char **argv) +int cmd__strcmp_offset(int argc, const char **argv) { int result; size_t offset; diff --git a/t/helper/test-string-list.c b/t/helper/test-string-list.c index 829ec3d7d2..2123dda85b 100644 --- a/t/helper/test-string-list.c +++ b/t/helper/test-string-list.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "string-list.h" @@ -41,7 +42,7 @@ static int prefix_cb(struct string_list_item *item, void *cb_data) return starts_with(item->string, prefix); } -int cmd_main(int argc, const char **argv) +int cmd__string_list(int argc, const char **argv) { if (argc == 5 && !strcmp(argv[1], "split")) { struct string_list list = STRING_LIST_INIT_DUP; diff --git a/t/helper/test-submodule-config.c b/t/helper/test-submodule-config.c index f23db3b19a..e2692746df 100644 --- a/t/helper/test-submodule-config.c +++ b/t/helper/test-submodule-config.c @@ -1,3 +1,4 @@ +#include "test-tool.h" #include "cache.h" #include "config.h" #include "submodule-config.h" @@ -10,7 +11,7 @@ static void die_usage(int argc, const char **argv, const char *msg) exit(1); } -int cmd_main(int argc, const char **argv) +int cmd__submodule_config(int argc, const char **argv) { const char **arg = argv; int my_argc = argc; @@ -48,9 +49,11 @@ int cmd_main(int argc, const char **argv) die_usage(argc, argv, "Commit not found."); if (lookup_name) { - submodule = submodule_from_name(&commit_oid, path_or_name); + submodule = submodule_from_name(the_repository, + &commit_oid, path_or_name); } else - submodule = submodule_from_path(&commit_oid, path_or_name); + submodule = submodule_from_path(the_repository, + &commit_oid, path_or_name); if (!submodule) die_usage(argc, argv, "Submodule not found."); @@ -64,7 +67,7 @@ int cmd_main(int argc, const char **argv) arg += 2; } - submodule_free(); + submodule_free(the_repository); return 0; } diff --git a/t/helper/test-subprocess.c b/t/helper/test-subprocess.c index 30c5765bfc..92b69de635 100644 --- a/t/helper/test-subprocess.c +++ b/t/helper/test-subprocess.c @@ -1,7 +1,8 @@ +#include "test-tool.h" #include "cache.h" #include "run-command.h" -int cmd_main(int argc, const char **argv) +int cmd__subprocess(int argc, const char **argv) { struct child_process cp = CHILD_PROCESS_INIT; int nogit = 0; diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c new file mode 100644 index 0000000000..805a45de9c --- /dev/null +++ b/t/helper/test-tool.c @@ -0,0 +1,63 @@ +#include "git-compat-util.h" +#include "test-tool.h" + +struct test_cmd { + const char *name; + int (*fn)(int argc, const char **argv); +}; + +static struct test_cmd cmds[] = { + { "chmtime", cmd__chmtime }, + { "config", cmd__config }, + { "ctype", cmd__ctype }, + { "date", cmd__date }, + { "delta", cmd__delta }, + { "drop-caches", cmd__drop_caches }, + { "dump-cache-tree", cmd__dump_cache_tree }, + { "dump-split-index", cmd__dump_split_index }, + { "example-decorate", cmd__example_decorate }, + { "genrandom", cmd__genrandom }, + { "hashmap", cmd__hashmap }, + { "index-version", cmd__index_version }, + { "lazy-init-name-hash", cmd__lazy_init_name_hash }, + { "match-trees", cmd__match_trees }, + { "mergesort", cmd__mergesort }, + { "mktemp", cmd__mktemp }, + { "online-cpus", cmd__online_cpus }, + { "path-utils", cmd__path_utils }, + { "prio-queue", cmd__prio_queue }, + { "read-cache", cmd__read_cache }, + { "ref-store", cmd__ref_store }, + { "regex", cmd__regex }, + { "revision-walking", cmd__revision_walking }, + { "run-command", cmd__run_command }, + { "scrap-cache-tree", cmd__scrap_cache_tree }, + { "sha1-array", cmd__sha1_array }, + { "sha1", cmd__sha1 }, + { "sigchain", cmd__sigchain }, + { "strcmp-offset", cmd__strcmp_offset }, + { "string-list", cmd__string_list }, + { "submodule-config", cmd__submodule_config }, + { "subprocess", cmd__subprocess }, + { "urlmatch-normalization", cmd__urlmatch_normalization }, + { "wildmatch", cmd__wildmatch }, + { "write-cache", cmd__write_cache }, +}; + +int cmd_main(int argc, const char **argv) +{ + int i; + + BUG_exit_code = 99; + if (argc < 2) + die("I need a test name!"); + + for (i = 0; i < ARRAY_SIZE(cmds); i++) { + if (!strcmp(cmds[i].name, argv[1])) { + argv++; + argc--; + return cmds[i].fn(argc, argv); + } + } + die("There is no test named '%s'", argv[1]); +} diff --git a/t/helper/test-tool.h b/t/helper/test-tool.h new file mode 100644 index 0000000000..7116ddfb94 --- /dev/null +++ b/t/helper/test-tool.h @@ -0,0 +1,40 @@ +#ifndef __TEST_TOOL_H__ +#define __TEST_TOOL_H__ + +int cmd__chmtime(int argc, const char **argv); +int cmd__config(int argc, const char **argv); +int cmd__ctype(int argc, const char **argv); +int cmd__date(int argc, const char **argv); +int cmd__delta(int argc, const char **argv); +int cmd__drop_caches(int argc, const char **argv); +int cmd__dump_cache_tree(int argc, const char **argv); +int cmd__dump_split_index(int argc, const char **argv); +int cmd__example_decorate(int argc, const char **argv); +int cmd__genrandom(int argc, const char **argv); +int cmd__hashmap(int argc, const char **argv); +int cmd__index_version(int argc, const char **argv); +int cmd__lazy_init_name_hash(int argc, const char **argv); +int cmd__match_trees(int argc, const char **argv); +int cmd__mergesort(int argc, const char **argv); +int cmd__mktemp(int argc, const char **argv); +int cmd__online_cpus(int argc, const char **argv); +int cmd__path_utils(int argc, const char **argv); +int cmd__prio_queue(int argc, const char **argv); +int cmd__read_cache(int argc, const char **argv); +int cmd__ref_store(int argc, const char **argv); +int cmd__regex(int argc, const char **argv); +int cmd__revision_walking(int argc, const char **argv); +int cmd__run_command(int argc, const char **argv); +int cmd__scrap_cache_tree(int argc, const char **argv); +int cmd__sha1_array(int argc, const char **argv); +int cmd__sha1(int argc, const char **argv); +int cmd__sigchain(int argc, const char **argv); +int cmd__strcmp_offset(int argc, const char **argv); +int cmd__string_list(int argc, const char **argv); +int cmd__submodule_config(int argc, const char **argv); +int cmd__subprocess(int argc, const char **argv); +int cmd__urlmatch_normalization(int argc, const char **argv); +int cmd__wildmatch(int argc, const char **argv); +int cmd__write_cache(int argc, const char **argv); + +#endif diff --git a/t/helper/test-urlmatch-normalization.c b/t/helper/test-urlmatch-normalization.c index 49b6e836be..8f4d67e646 100644 --- a/t/helper/test-urlmatch-normalization.c +++ b/t/helper/test-urlmatch-normalization.c @@ -1,9 +1,10 @@ +#include "test-tool.h" #include "git-compat-util.h" #include "urlmatch.h" -int cmd_main(int argc, const char **argv) +int cmd__urlmatch_normalization(int argc, const char **argv) { - const char usage[] = "test-urlmatch-normalization [-p | -l] <url1> | <url1> <url2>"; + const char usage[] = "test-tool urlmatch-normalization [-p | -l] <url1> | <url1> <url2>"; char *url1, *url2; int opt_p = 0, opt_l = 0; diff --git a/t/helper/test-wildmatch.c b/t/helper/test-wildmatch.c index 921d7b3e7e..2c103d1824 100644 --- a/t/helper/test-wildmatch.c +++ b/t/helper/test-wildmatch.c @@ -1,6 +1,7 @@ +#include "test-tool.h" #include "cache.h" -int cmd_main(int argc, const char **argv) +int cmd__wildmatch(int argc, const char **argv) { int i; for (i = 2; i < argc; i++) { @@ -16,6 +17,8 @@ int cmd_main(int argc, const char **argv) return !!wildmatch(argv[3], argv[2], WM_PATHNAME | WM_CASEFOLD); else if (!strcmp(argv[1], "pathmatch")) return !!wildmatch(argv[3], argv[2], 0); + else if (!strcmp(argv[1], "ipathmatch")) + return !!wildmatch(argv[3], argv[2], WM_CASEFOLD); else return 1; } diff --git a/t/helper/test-write-cache.c b/t/helper/test-write-cache.c index b7ee039669..8837717d36 100644 --- a/t/helper/test-write-cache.c +++ b/t/helper/test-write-cache.c @@ -1,22 +1,19 @@ +#include "test-tool.h" #include "cache.h" #include "lockfile.h" -static struct lock_file index_lock; - -int cmd_main(int argc, const char **argv) +int cmd__write_cache(int argc, const char **argv) { - int i, cnt = 1, lockfd; + struct lock_file index_lock = LOCK_INIT; + int i, cnt = 1; if (argc == 2) cnt = strtol(argv[1], NULL, 0); setup_git_directory(); read_cache(); for (i = 0; i < cnt; i++) { - lockfd = hold_locked_index(&index_lock, LOCK_DIE_ON_ERROR); - if (0 <= lockfd) { - write_locked_index(&the_index, &index_lock, COMMIT_LOCK); - } else { - rollback_lock_file(&index_lock); - } + hold_locked_index(&index_lock, LOCK_DIE_ON_ERROR); + if (write_locked_index(&the_index, &index_lock, COMMIT_LOCK)) + die("unable to write index file"); } return 0; diff --git a/t/lib-diff-alternative.sh b/t/lib-diff-alternative.sh index 8b4dbf22d2..8d1e408bb5 100644 --- a/t/lib-diff-alternative.sh +++ b/t/lib-diff-alternative.sh @@ -59,9 +59,11 @@ int main(int argc, char **argv) } EOF - cat >expect <<\EOF + file1=$(git rev-parse --short $(git hash-object file1)) + file2=$(git rev-parse --short $(git hash-object file2)) + cat >expect <<EOF diff --git a/file1 b/file2 -index 6faa5a3..e3af329 100644 +index $file1..$file2 100644 --- a/file1 +++ b/file2 @@ -1,26 +1,25 @@ @@ -136,9 +138,11 @@ e f EOF - cat >expect <<\EOF + uniq1=$(git rev-parse --short $(git hash-object uniq1)) + uniq2=$(git rev-parse --short $(git hash-object uniq2)) + cat >expect <<EOF diff --git a/uniq1 b/uniq2 -index b414108..0fdf397 100644 +index $uniq1..$uniq2 100644 --- a/uniq1 +++ b/uniq2 @@ -1,6 +1,6 @@ diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh index 54fd5a6ca0..c27599474c 100644 --- a/t/lib-git-p4.sh +++ b/t/lib-git-p4.sh @@ -39,7 +39,7 @@ native_path () { then path=$(cygpath --windows "$path") else - path=$(test-path-utils real_path "$path") + path=$(test-tool path-utils real_path "$path") fi && echo "$path" } diff --git a/t/lib-git-svn.sh b/t/lib-git-svn.sh index 4c1f81f167..a8130f9119 100644 --- a/t/lib-git-svn.sh +++ b/t/lib-git-svn.sh @@ -49,7 +49,7 @@ rawsvnrepo="$svnrepo" svnrepo="file://$svnrepo" poke() { - test-chmtime +1 "$1" + test-tool chmtime +1 "$1" } # We need this, because we should pass empty configuration directory to diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index 435a37465a..ed41b155af 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -132,6 +132,7 @@ prepare_httpd() { cp "$TEST_PATH"/passwd "$HTTPD_ROOT_PATH" install_script broken-smart-http.sh install_script error.sh + install_script apply-one-time-sed.sh ln -s "$LIB_HTTPD_MODULE_PATH" "$HTTPD_ROOT_PATH/modules" diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 724d9ae462..581c010d8f 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -111,9 +111,14 @@ Alias /auth/dumb/ www/auth/dumb/ SetEnv GIT_EXEC_PATH ${GIT_EXEC_PATH} SetEnv GIT_HTTP_EXPORT_ALL </LocationMatch> +<LocationMatch /one_time_sed/> + SetEnv GIT_EXEC_PATH ${GIT_EXEC_PATH} + SetEnv GIT_HTTP_EXPORT_ALL +</LocationMatch> ScriptAliasMatch /smart_*[^/]*/(.*) ${GIT_EXEC_PATH}/git-http-backend/$1 ScriptAlias /broken_smart/ broken-smart-http.sh/ ScriptAlias /error/ error.sh/ +ScriptAliasMatch /one_time_sed/(.*) apply-one-time-sed.sh/$1 <Directory ${GIT_EXEC_PATH}> Options FollowSymlinks </Directory> @@ -123,6 +128,9 @@ ScriptAlias /error/ error.sh/ <Files error.sh> Options ExecCGI </Files> +<Files apply-one-time-sed.sh> + Options ExecCGI +</Files> <Files ${GIT_EXEC_PATH}/git-http-backend> Options ExecCGI </Files> diff --git a/t/lib-httpd/apply-one-time-sed.sh b/t/lib-httpd/apply-one-time-sed.sh new file mode 100644 index 0000000000..fcef728925 --- /dev/null +++ b/t/lib-httpd/apply-one-time-sed.sh @@ -0,0 +1,22 @@ +#!/bin/sh + +# If "one-time-sed" exists in $HTTPD_ROOT_PATH, run sed on the HTTP response, +# using the contents of "one-time-sed" as the sed command to be run. If the +# response was modified as a result, delete "one-time-sed" so that subsequent +# HTTP responses are no longer modified. +# +# This can be used to simulate the effects of the repository changing in +# between HTTP request-response pairs. +if [ -e one-time-sed ]; then + "$GIT_EXEC_PATH/git-http-backend" >out + sed "$(cat one-time-sed)" <out >out_modified + + if diff out out_modified >/dev/null; then + cat out + else + cat out_modified + rm one-time-sed + fi +else + "$GIT_EXEC_PATH/git-http-backend" +fi diff --git a/t/lib-pack.sh b/t/lib-pack.sh index 7509846571..c4d907a450 100644 --- a/t/lib-pack.sh +++ b/t/lib-pack.sh @@ -79,13 +79,25 @@ pack_obj () { ;; esac + # If it's not a delta, we can convince pack-objects to generate a pack + # with just our entry, and then strip off the header (12 bytes) and + # trailer (20 bytes). + if test -z "$2" + then + echo "$1" | git pack-objects --stdout >pack_obj.tmp && + size=$(wc -c <pack_obj.tmp) && + dd if=pack_obj.tmp bs=1 count=$((size - 20 - 12)) skip=12 && + rm -f pack_obj.tmp + return + fi + echo >&2 "BUG: don't know how to print $1${2:+ (from $2)}" return 1 } # Compute and append pack trailer to "$1" pack_trailer () { - test-sha1 -b <"$1" >trailer.tmp && + test-tool sha1 -b <"$1" >trailer.tmp && cat trailer.tmp >>"$1" && rm -f trailer.tmp } diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index 1f38a85371..be78cdc1ff 100755 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -235,7 +235,7 @@ reset_work_tree_to_interested () { then mkdir -p submodule_update/.git/modules/sub1/modules && cp -r submodule_update_repo/.git/modules/sub1/modules/sub2 submodule_update/.git/modules/sub1/modules/sub2 - GIT_WORK_TREE=. git -C submodule_update/.git/modules/sub1/modules/sub2 config --unset core.worktree + # core.worktree is unset for sub2 as it is not checked out fi && # indicate we are interested in the submodule: git -C submodule_update config submodule.sub1.url "bogus" && @@ -709,7 +709,8 @@ test_submodule_recursing_with_args_common() { git branch -t remove_sub1 origin/remove_sub1 && $command remove_sub1 && test_superproject_content origin/remove_sub1 && - ! test -e sub1 + ! test -e sub1 && + test_must_fail git config -f .git/modules/sub1/config core.worktree ) ' # ... absorbing a .git directory along the way. @@ -781,7 +782,8 @@ test_submodule_recursing_with_args_common() { ( cd submodule_update && git branch -t invalid_sub1 origin/invalid_sub1 && - test_must_fail $command invalid_sub1 && + test_must_fail $command invalid_sub1 2>err && + test_i18ngrep sub1 err && test_superproject_content origin/add_sub1 && test_submodule_content sub1 origin/add_sub1 ) diff --git a/t/lib-t6000.sh b/t/lib-t6000.sh index 3f2d873fec..b0ed4767e3 100644 --- a/t/lib-t6000.sh +++ b/t/lib-t6000.sh @@ -4,11 +4,11 @@ mkdir -p .git/refs/tags >sed.script -# Answer the sha1 has associated with the tag. The tag must exist in .git/refs/tags +# Answer the sha1 has associated with the tag. The tag must exist under refs/tags tag () { _tag=$1 - test -f ".git/refs/tags/$_tag" || error "tag: \"$_tag\" does not exist" - cat ".git/refs/tags/$_tag" + git rev-parse --verify "refs/tags/$_tag" || + error "tag: \"$_tag\" does not exist" } # Generate a commit using the text specified to make it unique and the tree diff --git a/t/lib-terminal.sh b/t/lib-terminal.sh index cd220e378e..e3809dcead 100644 --- a/t/lib-terminal.sh +++ b/t/lib-terminal.sh @@ -9,8 +9,8 @@ test_terminal () { echo >&4 "test_terminal: need to declare TTY prerequisite" return 127 fi - perl "$TEST_DIRECTORY"/test-terminal.perl "$@" -} + perl "$TEST_DIRECTORY"/test-terminal.perl "$@" 2>&7 +} 7>&2 2>&4 test_lazy_prereq TTY ' test_have_prereq PERL && diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index e401208488..bc865160e7 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -1,8 +1,10 @@ #!/usr/bin/perl -use lib '../../perl/blib/lib'; +use lib '../../perl/build/lib'; use strict; use warnings; +use JSON; +use Getopt::Long; use Git; sub get_times { @@ -35,7 +37,31 @@ sub format_times { return $out; } -my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests); +sub usage { + print <<EOT; +./aggregate.perl [options] [--] [<dir_or_rev>...] [--] [<test_script>...] > + + Options: + --codespeed * Format output for Codespeed + --reponame <str> * Send given reponame to codespeed + --sort-by <str> * Sort output (only "regression" criteria is supported) + --subsection <str> * Use results from given subsection + +EOT + exit(1); +} + +my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests, + $codespeed, $sortby, $subsection, $reponame); + +Getopt::Long::Configure qw/ require_order /; + +my $rc = GetOptions("codespeed" => \$codespeed, + "reponame=s" => \$reponame, + "sort-by=s" => \$sortby, + "subsection=s" => \$subsection); +usage() unless $rc; + while (scalar @ARGV) { my $arg = $ARGV[0]; my $dir; @@ -70,8 +96,15 @@ if (not @tests) { } my $resultsdir = "test-results"; -if ($ENV{GIT_PERF_SUBSECTION} ne "") { - $resultsdir .= "/" . $ENV{GIT_PERF_SUBSECTION}; + +if (! $subsection and + exists $ENV{GIT_PERF_SUBSECTION} and + $ENV{GIT_PERF_SUBSECTION} ne "") { + $subsection = $ENV{GIT_PERF_SUBSECTION}; +} + +if ($subsection) { + $resultsdir .= "/" . $subsection; } my @subtests; @@ -100,13 +133,6 @@ sub read_descr { return $line; } -my %descrs; -my $descrlen = 4; # "Test" -for my $t (@subtests) { - $descrs{$t} = $shorttests{$t}.": ".read_descr("$resultsdir/$t.descr"); - $descrlen = length $descrs{$t} if length $descrs{$t}>$descrlen; -} - sub have_duplicate { my %seen; for (@_) { @@ -122,54 +148,168 @@ sub have_slash { return 0; } -my %newdirabbrevs = %dirabbrevs; -while (!have_duplicate(values %newdirabbrevs)) { - %dirabbrevs = %newdirabbrevs; - last if !have_slash(values %dirabbrevs); - %newdirabbrevs = %dirabbrevs; - for (values %newdirabbrevs) { - s{^[^/]*/}{}; - } +sub display_dir { + my ($d) = @_; + return exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}; } -my %times; -my @colwidth = ((0)x@dirs); -for my $i (0..$#dirs) { - my $d = $dirs[$i]; - my $w = length (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); - $colwidth[$i] = $w if $w > $colwidth[$i]; -} -for my $t (@subtests) { - my $firstr; +sub print_default_results { + my %descrs; + my $descrlen = 4; # "Test" + for my $t (@subtests) { + $descrs{$t} = $shorttests{$t}.": ".read_descr("$resultsdir/$t.descr"); + $descrlen = length $descrs{$t} if length $descrs{$t}>$descrlen; + } + + my %newdirabbrevs = %dirabbrevs; + while (!have_duplicate(values %newdirabbrevs)) { + %dirabbrevs = %newdirabbrevs; + last if !have_slash(values %dirabbrevs); + %newdirabbrevs = %dirabbrevs; + for (values %newdirabbrevs) { + s{^[^/]*/}{}; + } + } + + my %times; + my @colwidth = ((0)x@dirs); for my $i (0..$#dirs) { - my $d = $dirs[$i]; - $times{$prefixes{$d}.$t} = [get_times("$resultsdir/$prefixes{$d}$t.times")]; - my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; - my $w = length format_times($r,$u,$s,$firstr); + my $w = length display_dir($dirs[$i]); $colwidth[$i] = $w if $w > $colwidth[$i]; - $firstr = $r unless defined $firstr; + } + for my $t (@subtests) { + my $firstr; + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + $times{$prefixes{$d}.$t} = [get_times("$resultsdir/$prefixes{$d}$t.times")]; + my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; + my $w = length format_times($r,$u,$s,$firstr); + $colwidth[$i] = $w if $w > $colwidth[$i]; + $firstr = $r unless defined $firstr; + } + } + my $totalwidth = 3*@dirs+$descrlen; + $totalwidth += $_ for (@colwidth); + + printf "%-${descrlen}s", "Test"; + for my $i (0..$#dirs) { + printf " %-$colwidth[$i]s", display_dir($dirs[$i]); + } + print "\n"; + print "-"x$totalwidth, "\n"; + for my $t (@subtests) { + printf "%-${descrlen}s", $descrs{$t}; + my $firstr; + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; + printf " %-$colwidth[$i]s", format_times($r,$u,$s,$firstr); + $firstr = $r unless defined $firstr; + } + print "\n"; } } -my $totalwidth = 3*@dirs+$descrlen; -$totalwidth += $_ for (@colwidth); -binmode STDOUT, ":utf8" or die "PANIC on binmode: $!"; +sub print_sorted_results { + my ($sortby) = @_; + + if ($sortby ne "regression") { + print "Only 'regression' is supported as '--sort-by' argument\n"; + usage(); + } + + my @evolutions; + for my $t (@subtests) { + my ($prevr, $prevu, $prevs, $prevrev); + for my $i (0..$#dirs) { + my $d = $dirs[$i]; + my ($r, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.times"); + if ($i > 0 and defined $r and defined $prevr and $prevr > 0) { + my $percent = 100.0 * ($r - $prevr) / $prevr; + push @evolutions, { "percent" => $percent, + "test" => $t, + "prevrev" => $prevrev, + "rev" => $d, + "prevr" => $prevr, + "r" => $r, + "prevu" => $prevu, + "u" => $u, + "prevs" => $prevs, + "s" => $s}; + } + ($prevr, $prevu, $prevs, $prevrev) = ($r, $u, $s, $d); + } + } + + my @sorted_evolutions = sort { $b->{percent} <=> $a->{percent} } @evolutions; -printf "%-${descrlen}s", "Test"; -for my $i (0..$#dirs) { - my $d = $dirs[$i]; - printf " %-$colwidth[$i]s", (exists $dirabbrevs{$d} ? $dirabbrevs{$d} : $dirnames{$d}); + for my $e (@sorted_evolutions) { + printf "%+.1f%%", $e->{percent}; + print " " . $e->{test}; + print " " . format_times($e->{prevr}, $e->{prevu}, $e->{prevs}); + print " " . format_times($e->{r}, $e->{u}, $e->{s}); + print " " . display_dir($e->{prevrev}); + print " " . display_dir($e->{rev}); + print "\n"; + } } -print "\n"; -print "-"x$totalwidth, "\n"; -for my $t (@subtests) { - printf "%-${descrlen}s", $descrs{$t}; - my $firstr; - for my $i (0..$#dirs) { - my $d = $dirs[$i]; - my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; - printf " %-$colwidth[$i]s", format_times($r,$u,$s,$firstr); - $firstr = $r unless defined $firstr; + +sub print_codespeed_results { + my ($subsection) = @_; + + my $project = "Git"; + + my $executable = `uname -s -m`; + chomp $executable; + + if ($subsection) { + $executable .= ", " . $subsection; } - print "\n"; + + my $environment; + if ($reponame) { + $environment = $reponame; + } elsif (exists $ENV{GIT_PERF_REPO_NAME} and $ENV{GIT_PERF_REPO_NAME} ne "") { + $environment = $ENV{GIT_PERF_REPO_NAME}; + } elsif (exists $ENV{GIT_TEST_INSTALLED} and $ENV{GIT_TEST_INSTALLED} ne "") { + $environment = $ENV{GIT_TEST_INSTALLED}; + $environment =~ s|/bin-wrappers$||; + } else { + $environment = `uname -r`; + chomp $environment; + } + + my @data; + + for my $t (@subtests) { + for my $d (@dirs) { + my $commitid = $prefixes{$d}; + $commitid =~ s/^build_//; + $commitid =~ s/\.$//; + my ($result_value, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.times"); + + my %vals = ( + "commitid" => $commitid, + "project" => $project, + "branch" => $dirnames{$d}, + "executable" => $executable, + "benchmark" => $shorttests{$t} . " " . read_descr("$resultsdir/$t.descr"), + "environment" => $environment, + "result_value" => $result_value, + ); + push @data, \%vals; + } + } + + print to_json(\@data, {utf8 => 1, pretty => 1, canonical => 1}), "\n"; +} + +binmode STDOUT, ":utf8" or die "PANIC on binmode: $!"; + +if ($codespeed) { + print_codespeed_results($subsection); +} elsif (defined $sortby) { + print_sorted_results($sortby); +} else { + print_default_results(); } diff --git a/t/perf/bisect_regression b/t/perf/bisect_regression new file mode 100755 index 0000000000..a94d9955d0 --- /dev/null +++ b/t/perf/bisect_regression @@ -0,0 +1,73 @@ +#!/bin/sh + +# Read a line coming from `./aggregate.perl --sort-by regression ...` +# and automatically bisect to find the commit responsible for the +# performance regression. +# +# Lines from `./aggregate.perl --sort-by regression ...` look like: +# +# +100.0% p7821-grep-engines-fixed.1 0.04(0.10+0.03) 0.08(0.11+0.08) v2.14.3 v2.15.1 +# +33.3% p7820-grep-engines.1 0.03(0.08+0.02) 0.04(0.08+0.02) v2.14.3 v2.15.1 +# + +die () { + echo >&2 "error: $*" + exit 1 +} + +while [ $# -gt 0 ]; do + arg="$1" + case "$arg" in + --help) + echo "usage: $0 [--config file] [--subsection subsection]" + exit 0 + ;; + --config) + shift + GIT_PERF_CONFIG_FILE=$(cd "$(dirname "$1")"; pwd)/$(basename "$1") + export GIT_PERF_CONFIG_FILE + shift ;; + --subsection) + shift + GIT_PERF_SUBSECTION="$1" + export GIT_PERF_SUBSECTION + shift ;; + --*) + die "unrecognised option: '$arg'" ;; + *) + die "unknown argument '$arg'" + ;; + esac +done + +read -r regression subtest oldtime newtime oldrev newrev + +test_script=$(echo "$subtest" | sed -e 's/\(.*\)\.[0-9]*$/\1.sh/') +test_number=$(echo "$subtest" | sed -e 's/.*\.\([0-9]*\)$/\1/') + +# oldtime and newtime are decimal number, not integers + +oldtime=$(echo "$oldtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') +newtime=$(echo "$newtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') + +test $(echo "$newtime" "$oldtime" | awk '{ print ($1 > $2) }') = 1 || + die "New time '$newtime' shoud be greater than old time '$oldtime'" + +tmpdir=$(mktemp -d -t bisect_regression_XXXXXX) || die "Failed to create temp directory" +echo "$oldtime" >"$tmpdir/oldtime" || die "Failed to write to '$tmpdir/oldtime'" +echo "$newtime" >"$tmpdir/newtime" || die "Failed to write to '$tmpdir/newtime'" + +# Bisecting must be performed from the top level directory (even with --no-checkout) +( + toplevel_dir=$(git rev-parse --show-toplevel) || die "Failed to find top level directory" + cd "$toplevel_dir" || die "Failed to cd into top level directory '$toplevel_dir'" + + git bisect start --no-checkout "$newrev" "$oldrev" || die "Failed to start bisecting" + + git bisect run t/perf/bisect_run_script "$test_script" "$test_number" "$tmpdir" + res="$?" + + git bisect reset + + exit "$res" +) diff --git a/t/perf/bisect_run_script b/t/perf/bisect_run_script new file mode 100755 index 0000000000..3ebaf15521 --- /dev/null +++ b/t/perf/bisect_run_script @@ -0,0 +1,53 @@ +#!/bin/sh + +script="$1" +test_number="$2" +info_dir="$3" + +# This aborts the bisection immediately +die () { + echo >&2 "error: $*" + exit 255 +} + +bisect_head=$(git rev-parse --verify BISECT_HEAD) || die "Failed to find BISECT_HEAD ref" + +script_number=$(echo "$script" | sed -e "s/^p\([0-9]*\).*\$/\1/") || die "Failed to get script number for '$script'" + +oldtime=$(cat "$info_dir/oldtime") || die "Failed to access '$info_dir/oldtime'" +newtime=$(cat "$info_dir/newtime") || die "Failed to access '$info_dir/newtime'" + +cd t/perf || die "Failed to cd into 't/perf'" + +result_file="$info_dir/perf_${script_number}_${bisect_head}_results.txt" + +GIT_PERF_DIRS_OR_REVS="$bisect_head" +export GIT_PERF_DIRS_OR_REVS + +# Don't use codespeed +GIT_PERF_CODESPEED_OUTPUT= +GIT_PERF_SEND_TO_CODESPEED= +export GIT_PERF_CODESPEED_OUTPUT +export GIT_PERF_SEND_TO_CODESPEED + +./run "$script" >"$result_file" 2>&1 || die "Failed to run perf test '$script'" + +rtime=$(sed -n "s/^$script_number\.$test_number:.*\([0-9]\+\.[0-9]\+\)(.*).*\$/\1/p" "$result_file") + +echo "newtime: $newtime" +echo "rtime: $rtime" +echo "oldtime: $oldtime" + +# Compare ($newtime - $rtime) with ($rtime - $oldtime) +# Times are decimal number, not integers + +if test $(echo "$newtime" "$rtime" "$oldtime" | awk '{ print ($1 - $2 > $2 - $3) }') = 1 +then + # Current commit is considered "good/old" + echo "$rtime" >"$info_dir/oldtime" + exit 0 +else + # Current commit is considered "bad/new" + echo "$rtime" >"$info_dir/newtime" + exit 1 +fi diff --git a/t/perf/p0002-read-cache.sh b/t/perf/p0002-read-cache.sh index 9180ae9343..cdd105a594 100755 --- a/t/perf/p0002-read-cache.sh +++ b/t/perf/p0002-read-cache.sh @@ -8,7 +8,7 @@ test_perf_default_repo count=1000 test_perf "read_cache/discard_cache $count times" " - test-read-cache $count + test-tool read-cache $count " test_done diff --git a/t/perf/p0004-lazy-init-name-hash.sh b/t/perf/p0004-lazy-init-name-hash.sh index 8de5a98cfc..1afc08fe7f 100755 --- a/t/perf/p0004-lazy-init-name-hash.sh +++ b/t/perf/p0004-lazy-init-name-hash.sh @@ -7,8 +7,8 @@ test_perf_large_repo test_checkout_worktree test_expect_success 'verify both methods build the same hashmaps' ' - test-lazy-init-name-hash --dump --single >out.single && - if test-lazy-init-name-hash --dump --multi >out.multi + test-tool lazy-init-name-hash --dump --single >out.single && + if test-tool lazy-init-name-hash --dump --multi >out.multi then test_set_prereq REPO_BIG_ENOUGH_FOR_MULTI && sort <out.single >sorted.single && @@ -46,11 +46,11 @@ test_expect_success 'calibrate' ' ' test_perf "single-threaded, $desc" " - test-lazy-init-name-hash --single --count=$count + test-tool lazy-init-name-hash --single --count=$count " test_perf REPO_BIG_ENOUGH_FOR_MULTI "multi-threaded, $desc" " - test-lazy-init-name-hash --multi --count=$count + test-tool lazy-init-name-hash --multi --count=$count " test_done diff --git a/t/perf/p0007-write-cache.sh b/t/perf/p0007-write-cache.sh index 261fe92fd9..09595264f0 100755 --- a/t/perf/p0007-write-cache.sh +++ b/t/perf/p0007-write-cache.sh @@ -23,7 +23,7 @@ test_expect_success "setup repo" ' count=3 test_perf "write_locked_index $count times ($nr_files files)" " - test-write-cache $count + test-tool write-cache $count " test_done diff --git a/t/perf/p0071-sort.sh b/t/perf/p0071-sort.sh index 7c9a35a646..6e924f5fa3 100755 --- a/t/perf/p0071-sort.sh +++ b/t/perf/p0071-sort.sh @@ -16,7 +16,7 @@ test_perf 'sort(1)' ' ' test_perf 'string_list_sort()' ' - test-string-list sort <unsorted >actual + test-tool string-list sort <unsorted >actual ' test_expect_success 'string_list_sort() sorts like sort(1)' ' diff --git a/t/perf/p7519-fsmonitor.sh b/t/perf/p7519-fsmonitor.sh index 65e145c02d..def7ecdbc7 100755 --- a/t/perf/p7519-fsmonitor.sh +++ b/t/perf/p7519-fsmonitor.sh @@ -118,7 +118,7 @@ test_expect_success "setup for fsmonitor" ' ' if test -n "$GIT_PERF_7519_DROP_CACHE"; then - test-drop-caches + test-tool drop-caches fi test_perf "status (fsmonitor=$INTEGRATION_SCRIPT)" ' @@ -126,7 +126,7 @@ test_perf "status (fsmonitor=$INTEGRATION_SCRIPT)" ' ' if test -n "$GIT_PERF_7519_DROP_CACHE"; then - test-drop-caches + test-tool drop-caches fi test_perf "status -uno (fsmonitor=$INTEGRATION_SCRIPT)" ' @@ -134,7 +134,7 @@ test_perf "status -uno (fsmonitor=$INTEGRATION_SCRIPT)" ' ' if test -n "$GIT_PERF_7519_DROP_CACHE"; then - test-drop-caches + test-tool drop-caches fi test_perf "status -uall (fsmonitor=$INTEGRATION_SCRIPT)" ' @@ -148,7 +148,7 @@ test_expect_success "setup without fsmonitor" ' ' if test -n "$GIT_PERF_7519_DROP_CACHE"; then - test-drop-caches + test-tool drop-caches fi test_perf "status (fsmonitor=$INTEGRATION_SCRIPT)" ' @@ -156,7 +156,7 @@ test_perf "status (fsmonitor=$INTEGRATION_SCRIPT)" ' ' if test -n "$GIT_PERF_7519_DROP_CACHE"; then - test-drop-caches + test-tool drop-caches fi test_perf "status -uno (fsmonitor=$INTEGRATION_SCRIPT)" ' @@ -164,7 +164,7 @@ test_perf "status -uno (fsmonitor=$INTEGRATION_SCRIPT)" ' ' if test -n "$GIT_PERF_7519_DROP_CACHE"; then - test-drop-caches + test-tool drop-caches fi test_perf "status -uall (fsmonitor=$INTEGRATION_SCRIPT)" ' diff --git a/t/perf/run b/t/perf/run index 43e4de49ef..9aaa733c77 100755 --- a/t/perf/run +++ b/t/perf/run @@ -1,21 +1,34 @@ #!/bin/sh -case "$1" in +die () { + echo >&2 "error: $*" + exit 1 +} + +while [ $# -gt 0 ]; do + arg="$1" + case "$arg" in + --) + break ;; --help) - echo "usage: $0 [--config file] [other_git_tree...] [--] [test_scripts]" - exit 0 - ;; + echo "usage: $0 [--config file] [--subsection subsec] [other_git_tree...] [--] [test_scripts]" + exit 0 ;; --config) shift GIT_PERF_CONFIG_FILE=$(cd "$(dirname "$1")"; pwd)/$(basename "$1") export GIT_PERF_CONFIG_FILE shift ;; -esac - -die () { - echo >&2 "error: $*" - exit 1 -} + --subsection) + shift + GIT_PERF_SUBSECTION="$1" + export GIT_PERF_SUBSECTION + shift ;; + --*) + die "unrecognised option: '$arg'" ;; + *) + break ;; + esac +done run_one_dir () { if test $# -eq 0; then @@ -105,7 +118,7 @@ get_var_from_env_or_config () { env_var="$1" conf_sec="$2" conf_var="$3" - # $4 can be set to a default value + conf_opts="$4" # optional # Do nothing if the env variable is already set eval "test -z \"\${$env_var+x}\"" || return @@ -116,18 +129,17 @@ get_var_from_env_or_config () { if test -n "$GIT_PERF_SUBSECTION" then var="$conf_sec.$GIT_PERF_SUBSECTION.$conf_var" - conf_value=$(git config -f "$GIT_PERF_CONFIG_FILE" "$var") && + conf_value=$(git config $conf_opts -f "$GIT_PERF_CONFIG_FILE" "$var") && eval "$env_var=\"$conf_value\"" && return fi var="$conf_sec.$conf_var" - conf_value=$(git config -f "$GIT_PERF_CONFIG_FILE" "$var") && - eval "$env_var=\"$conf_value\"" && return - - test -n "${4+x}" && eval "$env_var=\"$4\"" + conf_value=$(git config $conf_opts -f "$GIT_PERF_CONFIG_FILE" "$var") && + eval "$env_var=\"$conf_value\"" } run_subsection () { - get_var_from_env_or_config "GIT_PERF_REPEAT_COUNT" "perf" "repeatCount" 3 + get_var_from_env_or_config "GIT_PERF_REPEAT_COUNT" "perf" "repeatCount" "--int" + : ${GIT_PERF_REPEAT_COUNT:=3} export GIT_PERF_REPEAT_COUNT get_var_from_env_or_config "GIT_PERF_DIRS_OR_REVS" "perf" "dirsOrRevs" @@ -136,6 +148,9 @@ run_subsection () { get_var_from_env_or_config "GIT_PERF_MAKE_COMMAND" "perf" "makeCommand" get_var_from_env_or_config "GIT_PERF_MAKE_OPTS" "perf" "makeOpts" + get_var_from_env_or_config "GIT_PERF_REPO_NAME" "perf" "repoName" + export GIT_PERF_REPO_NAME + GIT_PERF_AGGREGATING_LATER=t export GIT_PERF_AGGREGATING_LATER @@ -143,10 +158,25 @@ run_subsection () { set -- . "$@" fi + codespeed_opt= + test "$GIT_PERF_CODESPEED_OUTPUT" = "true" && codespeed_opt="--codespeed" + run_dirs "$@" - ./aggregate.perl "$@" + + if test -z "$GIT_PERF_SEND_TO_CODESPEED" + then + ./aggregate.perl $codespeed_opt "$@" + else + json_res_file="test-results/$GIT_PERF_SUBSECTION/aggregate.json" + ./aggregate.perl --codespeed "$@" | tee "$json_res_file" + send_data_url="$GIT_PERF_SEND_TO_CODESPEED/result/add/json/" + curl -v --request POST --data-urlencode "json=$(cat "$json_res_file")" "$send_data_url" + fi } +get_var_from_env_or_config "GIT_PERF_CODESPEED_OUTPUT" "perf" "codespeedOutput" "--bool" +get_var_from_env_or_config "GIT_PERF_SEND_TO_CODESPEED" "perf" "sendToCodespeed" + cd "$(dirname $0)" . ../../GIT-BUILD-OPTIONS @@ -155,9 +185,32 @@ get_subsections "perf" >test-results/run_subsections.names if test $(wc -l <test-results/run_subsections.names) -eq 0 then + if test -n "$GIT_PERF_SUBSECTION" + then + if test -n "$GIT_PERF_CONFIG_FILE" + then + die "no subsections are defined in config file '$GIT_PERF_CONFIG_FILE'" + else + die "subsection '$GIT_PERF_SUBSECTION' defined without a config file" + fi + fi ( run_subsection "$@" ) +elif test -n "$GIT_PERF_SUBSECTION" +then + egrep "^$GIT_PERF_SUBSECTION\$" test-results/run_subsections.names >/dev/null || + die "subsection '$GIT_PERF_SUBSECTION' not found in '$GIT_PERF_CONFIG_FILE'" + + egrep "^$GIT_PERF_SUBSECTION\$" test-results/run_subsections.names | while read -r subsec + do + ( + GIT_PERF_SUBSECTION="$subsec" + export GIT_PERF_SUBSECTION + echo "======== Run for subsection '$GIT_PERF_SUBSECTION' ========" + run_subsection "$@" + ) + done else while read -r subsec do diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 7fd87dd544..af61d083b4 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -839,7 +839,7 @@ test_expect_success 'writing tree out with git write-tree' ' ' # we know the shape and contents of the tree and know the object ID for it. -test_expect_success 'validate object ID of a known tree' ' +test_expect_success SHA1 'validate object ID of a known tree' ' test "$tree" = 7bb943559a305bdd6bdee2cef6e5df2413c3d30a ' @@ -882,7 +882,7 @@ test_expect_success 'showing stage with git ls-files --stage' ' git ls-files --stage >current ' -test_expect_success 'validate git ls-files output for a known tree' ' +test_expect_success SHA1 'validate git ls-files output for a known tree' ' cat >expected <<-\EOF && 100644 f87290f8eb2cbbea7857214459a0739927eab154 0 path0 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0 path0sym @@ -900,7 +900,7 @@ test_expect_success 'writing tree out with git write-tree' ' tree=$(git write-tree) ' -test_expect_success 'validate object ID for a known tree' ' +test_expect_success SHA1 'validate object ID for a known tree' ' test "$tree" = 087704a96baf1c2d1c869a8b084481e121c88b5b ' @@ -908,7 +908,7 @@ test_expect_success 'showing tree with git ls-tree' ' git ls-tree $tree >current ' -test_expect_success 'git ls-tree output for a known tree' ' +test_expect_success SHA1 'git ls-tree output for a known tree' ' cat >expected <<-\EOF && 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym @@ -924,7 +924,7 @@ test_expect_success 'showing tree with git ls-tree -r' ' git ls-tree -r $tree >current ' -test_expect_success 'git ls-tree -r output for a known tree' ' +test_expect_success SHA1 'git ls-tree -r output for a known tree' ' cat >expected <<-\EOF && 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym @@ -943,7 +943,7 @@ test_expect_success 'showing tree with git ls-tree -r -t' ' git ls-tree -r -t $tree >current ' -test_expect_success 'git ls-tree -r output for a known tree' ' +test_expect_success SHA1 'git ls-tree -r output for a known tree' ' cat >expected <<-\EOF && 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym @@ -964,7 +964,7 @@ test_expect_success 'writing partial tree out with git write-tree --prefix' ' ptree=$(git write-tree --prefix=path3) ' -test_expect_success 'validate object ID for a known tree' ' +test_expect_success SHA1 'validate object ID for a known tree' ' test "$ptree" = 21ae8269cacbe57ae09138dcc3a2887f904d02b3 ' @@ -972,7 +972,7 @@ test_expect_success 'writing partial tree out with git write-tree --prefix' ' ptree=$(git write-tree --prefix=path3/subp3) ' -test_expect_success 'validate object ID for a known tree' ' +test_expect_success SHA1 'validate object ID for a known tree' ' test "$ptree" = 3c5e5399f3a333eddecce7a9b9465b63f65f51e2 ' @@ -1006,7 +1006,7 @@ test_expect_success 'git read-tree followed by write-tree should be idempotent' test "$newtree" = "$tree" ' -test_expect_success 'validate git diff-files output for a know cache/work tree state' ' +test_expect_success SHA1 'validate git diff-files output for a know cache/work tree state' ' cat >expected <<\EOF && :100644 100644 f87290f8eb2cbbea7857214459a0739927eab154 0000000000000000000000000000000000000000 M path0 :120000 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0000000000000000000000000000000000000000 M path0sym @@ -1033,21 +1033,21 @@ test_expect_success 'no diff after checkout and git update-index --refresh' ' ################################################################ P=087704a96baf1c2d1c869a8b084481e121c88b5b -test_expect_success 'git commit-tree records the correct tree in a commit' ' +test_expect_success SHA1 'git commit-tree records the correct tree in a commit' ' commit0=$(echo NO | git commit-tree $P) && tree=$(git show --pretty=raw $commit0 | sed -n -e "s/^tree //p" -e "/^author /q") && test "z$tree" = "z$P" ' -test_expect_success 'git commit-tree records the correct parent in a commit' ' +test_expect_success SHA1 'git commit-tree records the correct parent in a commit' ' commit1=$(echo NO | git commit-tree $P -p $commit0) && parent=$(git show --pretty=raw $commit1 | sed -n -e "s/^parent //p" -e "/^author /q") && test "z$commit0" = "z$parent" ' -test_expect_success 'git commit-tree omits duplicated parent in a commit' ' +test_expect_success SHA1 'git commit-tree omits duplicated parent in a commit' ' commit2=$(echo NO | git commit-tree $P -p $commit0 -p $commit0) && parent=$(git show --pretty=raw $commit2 | sed -n -e "s/^parent //p" -e "/^author /q" | diff --git a/t/t0001-init.sh b/t/t0001-init.sh index c413bff9cf..4c865051e7 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -287,6 +287,7 @@ test_expect_success 'init notices EEXIST (2)' ' ' test_expect_success POSIXPERM,SANITY 'init notices EPERM' ' + test_when_finished "chmod +w newdir" && rm -fr newdir && mkdir newdir && chmod -w newdir && diff --git a/t/t0002-gitfile.sh b/t/t0002-gitfile.sh index 9670e8cbe6..3691023d51 100755 --- a/t/t0002-gitfile.sh +++ b/t/t0002-gitfile.sh @@ -10,15 +10,6 @@ objpath() { echo "$1" | sed -e 's|\(..\)|\1/|' } -objck() { - p=$(objpath "$1") - if test ! -f "$REAL/objects/$p" - then - echo "Object not found: $REAL/objects/$p" - false - fi -} - test_expect_success 'initial setup' ' REAL="$(pwd)/.real" && mv .git "$REAL" @@ -26,30 +17,14 @@ test_expect_success 'initial setup' ' test_expect_success 'bad setup: invalid .git file format' ' echo "gitdir $REAL" >.git && - if git rev-parse 2>.err - then - echo "git rev-parse accepted an invalid .git file" - false - fi && - if ! grep "Invalid gitfile format" .err - then - echo "git rev-parse returned wrong error" - false - fi + test_must_fail git rev-parse 2>.err && + test_i18ngrep "invalid gitfile format" .err ' test_expect_success 'bad setup: invalid .git file path' ' echo "gitdir: $REAL.not" >.git && - if git rev-parse 2>.err - then - echo "git rev-parse accepted an invalid .git file path" - false - fi && - if ! grep "Not a git repository" .err - then - echo "git rev-parse returned wrong error" - false - fi + test_must_fail git rev-parse 2>.err && + test_i18ngrep "not a git repository" .err ' test_expect_success 'final setup + check rev-parse --git-dir' ' @@ -60,7 +35,7 @@ test_expect_success 'final setup + check rev-parse --git-dir' ' test_expect_success 'check hash-object' ' echo "foo" >bar && SHA=$(cat bar | git hash-object -w --stdin) && - objck $SHA + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check cat-file' ' @@ -69,29 +44,21 @@ test_expect_success 'check cat-file' ' ' test_expect_success 'check update-index' ' - if test -f "$REAL/index" - then - echo "Hmm, $REAL/index exists?" - false - fi && + test_path_is_missing "$REAL/index" && rm -f "$REAL/objects/$(objpath $SHA)" && git update-index --add bar && - if ! test -f "$REAL/index" - then - echo "$REAL/index not found" - false - fi && - objck $SHA + test_path_is_file "$REAL/index" && + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check write-tree' ' SHA=$(git write-tree) && - objck $SHA + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check commit-tree' ' SHA=$(echo "commit bar" | git commit-tree $SHA) && - objck $SHA + test_path_is_file "$REAL/objects/$(objpath $SHA)" ' test_expect_success 'check rev-list' ' diff --git a/t/t0005-signals.sh b/t/t0005-signals.sh index 46042f1f13..4c214bd11c 100755 --- a/t/t0005-signals.sh +++ b/t/t0005-signals.sh @@ -10,7 +10,7 @@ one EOF test_expect_success 'sigchain works' ' - { test-sigchain >actual; ret=$?; } && + { test-tool sigchain >actual; ret=$?; } && { # Signal death by raise() on Windows acts like exit(3), # regardless of the signal number. So we must allow that @@ -24,7 +24,7 @@ test_expect_success 'sigchain works' ' test_expect_success !MINGW 'signals are propagated using shell convention' ' # we use exec here to avoid any sub-shell interpretation # of the exit code - git config alias.sigterm "!exec test-sigchain" && + git config alias.sigterm "!exec test-tool sigchain" && test_expect_code 143 git sigterm ' @@ -36,7 +36,7 @@ large_git () { } test_expect_success 'create blob' ' - test-genrandom foo 16384 >file && + test-tool genrandom foo 16384 >file && git add file ' diff --git a/t/t0006-date.sh b/t/t0006-date.sh index 7ac9466d50..64ff86df8e 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -10,7 +10,7 @@ check_relative() { t=$(($TEST_DATE_NOW - $1)) echo "$t -> $2" >expect test_expect_${3:-success} "relative date ($2)" " - test-date relative $t >actual && + test-tool date relative $t >actual && test_i18ncmp expect actual " } @@ -35,7 +35,7 @@ check_show () { zone=$5 test_expect_success $prereqs "show date ($format:$time)" ' echo "$time -> $expect" >expect && - TZ=${zone:-$TZ} test-date show:"$format" "$time" >actual && + TZ=${zone:-$TZ} test-tool date show:"$format" "$time" >actual && test_cmp expect actual ' } @@ -71,7 +71,7 @@ check_show iso-local "$FUTURE" "2152-06-19 22:24:56 +0000" TIME_IS_64BIT,TIME_T_ check_parse() { echo "$1 -> $2" >expect test_expect_${4:-success} "parse date ($1${3:+ TZ=$3})" " - TZ=${3:-$TZ} test-date parse '$1' >actual && + TZ=${3:-$TZ} test-tool date parse '$1' >actual && test_cmp expect actual " } @@ -92,7 +92,7 @@ check_parse '2008-02-14 20:30:45' '2008-02-14 20:30:45 -0500' EST5 check_approxidate() { echo "$1 -> $2 +0000" >expect test_expect_${3:-success} "parse approxidate ($1)" " - test-date approxidate '$1' >actual && + test-tool date approxidate '$1' >actual && test_cmp expect actual " } diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index d27f438bf4..c03f155a35 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -307,7 +307,7 @@ test_expect_success_multi 'needs work tree' '' ' cd .git && test_check_ignore "foo" 128 ) && - stderr_contains "fatal: This operation must be run in a work tree" + stderr_contains "fatal: this operation must be run in a work tree" ' ############################################################################ @@ -775,6 +775,26 @@ test_expect_success PIPE 'streaming support for --stdin' ' echo "$response" | grep "^:: two" ' +test_expect_success 'existing file and directory' ' + test_when_finished "rm one" && + test_when_finished "rmdir top-level-dir" && + >one && + mkdir top-level-dir && + git check-ignore one top-level-dir >actual && + grep one actual && + grep top-level-dir actual +' + +test_expect_success 'existing directory and file' ' + test_when_finished "rm one" && + test_when_finished "rmdir top-level-dir" && + >one && + mkdir top-level-dir && + git check-ignore top-level-dir one >actual && + grep one actual && + grep top-level-dir actual +' + ############################################################################ # # test whitespace handling diff --git a/t/t0009-prio-queue.sh b/t/t0009-prio-queue.sh index 94045c3fad..e56dfce668 100755 --- a/t/t0009-prio-queue.sh +++ b/t/t0009-prio-queue.sh @@ -17,7 +17,7 @@ cat >expect <<'EOF' 10 EOF test_expect_success 'basic ordering' ' - test-prio-queue 2 6 3 10 9 5 7 4 5 8 1 dump >actual && + test-tool prio-queue 2 6 3 10 9 5 7 4 5 8 1 dump >actual && test_cmp expect actual ' @@ -30,7 +30,7 @@ cat >expect <<'EOF' 6 EOF test_expect_success 'mixed put and get' ' - test-prio-queue 6 2 4 get 5 3 get get 1 dump >actual && + test-tool prio-queue 6 2 4 get 5 3 get get 1 dump >actual && test_cmp expect actual ' @@ -43,7 +43,7 @@ NULL NULL EOF test_expect_success 'notice empty queue' ' - test-prio-queue 1 2 get get get 1 2 get get get >actual && + test-tool prio-queue 1 2 get get get 1 2 get get get >actual && test_cmp expect actual ' diff --git a/t/t0011-hashmap.sh b/t/t0011-hashmap.sh index 9c217d948c..3f1f505e89 100755 --- a/t/t0011-hashmap.sh +++ b/t/t0011-hashmap.sh @@ -4,7 +4,7 @@ test_description='test hashmap and string hash functions' . ./test-lib.sh test_hashmap() { - echo "$1" | test-hashmap $3 > actual && + echo "$1" | test-tool hashmap $3 > actual && echo "$2" > expect && test_cmp expect actual } @@ -232,7 +232,7 @@ test_expect_success 'grow / shrink' ' echo value40 >> expect && echo size >> in && echo 64 39 >> expect && - cat in | test-hashmap > out && + cat in | test-tool hashmap > out && test_cmp expect out ' diff --git a/t/t0012-help.sh b/t/t0012-help.sh index 487b92a5de..bc27df7f38 100755 --- a/t/t0012-help.sh +++ b/t/t0012-help.sh @@ -25,6 +25,15 @@ test_expect_success "setup" ' EOF ' +# make sure to exercise these code paths, the output is a bit tricky +# to verify +test_expect_success 'basic help commands' ' + git help >/dev/null && + git help -a >/dev/null && + git help -g >/dev/null && + git help -av >/dev/null +' + test_expect_success "works for commands and guides by default" ' configure_help && git help status && @@ -49,8 +58,23 @@ test_expect_success "--help does not work for guides" " test_i18ncmp expect actual " +test_expect_success 'git help' ' + git help >help.output && + test_i18ngrep "^ clone " help.output && + test_i18ngrep "^ add " help.output && + test_i18ngrep "^ log " help.output && + test_i18ngrep "^ commit " help.output && + test_i18ngrep "^ fetch " help.output +' +test_expect_success 'git help -g' ' + git help -g >help.output && + test_i18ngrep "^ attributes " help.output && + test_i18ngrep "^ everyday " help.output && + test_i18ngrep "^ tutorial " help.output +' + test_expect_success 'generate builtin list' ' - git --list-builtins >builtins + git --list-cmds=builtins >builtins ' while read builtin diff --git a/t/t0013-sha1dc.sh b/t/t0013-sha1dc.sh index 6d655cb161..419f31a8f7 100755 --- a/t/t0013-sha1dc.sh +++ b/t/t0013-sha1dc.sh @@ -11,7 +11,7 @@ then fi test_expect_success 'test-sha1 detects shattered pdf' ' - test_must_fail test-sha1 <"$TEST_DATA/shattered-1.pdf" 2>err && + test_must_fail test-tool sha1 <"$TEST_DATA/shattered-1.pdf" 2>err && test_i18ngrep collision err && grep 38762cf7f55934b34d179ae6a4c80cadccbb7f0a err ' diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index 71350e0657..5f056982a5 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -98,6 +98,16 @@ test_expect_success 'safecrlf: git diff demotes safecrlf=true to warn' ' ' +test_expect_success 'safecrlf: no warning with safecrlf=false' ' + git config core.autocrlf input && + git config core.safecrlf false && + + for w in I am all CRLF; do echo $w; done | append_cr >allcrlf && + git add allcrlf 2>err && + test_must_be_empty err +' + + test_expect_success 'switch off autocrlf, safecrlf, reset HEAD' ' git config core.autocrlf false && git config core.safecrlf false && diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index 46f8e583c3..9479a4aaab 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -19,7 +19,7 @@ write_script rot13-filter.pl "$PERL_PATH" \ generate_random_characters () { LEN=$1 NAME=$2 - test-genrandom some-seed $LEN | + test-tool genrandom some-seed $LEN | perl -pe "s/./chr((ord($&) % 26) + ord('a'))/sge" >"$TEST_ROOT/$NAME" } @@ -267,7 +267,7 @@ test_expect_success 'filtering large input to small output should use little mem ' test_expect_success 'filter that does not read is fine' ' - test-genrandom foo $((128 * 1024 + 1)) >big && + test-tool genrandom foo $((128 * 1024 + 1)) >big && echo "big filter=epipe" >.gitattributes && test_config filter.epipe.clean "echo xyzzy" && git add big && diff --git a/t/t0028-working-tree-encoding.sh b/t/t0028-working-tree-encoding.sh new file mode 100755 index 0000000000..12b8eb963a --- /dev/null +++ b/t/t0028-working-tree-encoding.sh @@ -0,0 +1,245 @@ +#!/bin/sh + +test_description='working-tree-encoding conversion via gitattributes' + +. ./test-lib.sh + +GIT_TRACE_WORKING_TREE_ENCODING=1 && export GIT_TRACE_WORKING_TREE_ENCODING + +test_expect_success 'setup test files' ' + git config core.eol lf && + + text="hallo there!\ncan you read me?" && + echo "*.utf16 text working-tree-encoding=utf-16" >.gitattributes && + printf "$text" >test.utf8.raw && + printf "$text" | iconv -f UTF-8 -t UTF-16 >test.utf16.raw && + printf "$text" | iconv -f UTF-8 -t UTF-32 >test.utf32.raw && + + # Line ending tests + printf "one\ntwo\nthree\n" >lf.utf8.raw && + printf "one\r\ntwo\r\nthree\r\n" >crlf.utf8.raw && + + # BOM tests + printf "\0a\0b\0c" >nobom.utf16be.raw && + printf "a\0b\0c\0" >nobom.utf16le.raw && + printf "\376\777\0a\0b\0c" >bebom.utf16be.raw && + printf "\777\376a\0b\0c\0" >lebom.utf16le.raw && + printf "\0\0\0a\0\0\0b\0\0\0c" >nobom.utf32be.raw && + printf "a\0\0\0b\0\0\0c\0\0\0" >nobom.utf32le.raw && + printf "\0\0\376\777\0\0\0a\0\0\0b\0\0\0c" >bebom.utf32be.raw && + printf "\777\376\0\0a\0\0\0b\0\0\0c\0\0\0" >lebom.utf32le.raw && + + # Add only UTF-16 file, we will add the UTF-32 file later + cp test.utf16.raw test.utf16 && + cp test.utf32.raw test.utf32 && + git add .gitattributes test.utf16 && + git commit -m initial +' + +test_expect_success 'ensure UTF-8 is stored in Git' ' + test_when_finished "rm -f test.utf16.git" && + + git cat-file -p :test.utf16 >test.utf16.git && + test_cmp_bin test.utf8.raw test.utf16.git +' + +test_expect_success 're-encode to UTF-16 on checkout' ' + test_when_finished "rm -f test.utf16.raw" && + + rm test.utf16 && + git checkout test.utf16 && + test_cmp_bin test.utf16.raw test.utf16 +' + +test_expect_success 'check $GIT_DIR/info/attributes support' ' + test_when_finished "rm -f test.utf32.git" && + test_when_finished "git reset --hard HEAD" && + + echo "*.utf32 text working-tree-encoding=utf-32" >.git/info/attributes && + git add test.utf32 && + + git cat-file -p :test.utf32 >test.utf32.git && + test_cmp_bin test.utf8.raw test.utf32.git +' + +for i in 16 32 +do + test_expect_success "check prohibited UTF-${i} BOM" ' + test_when_finished "git reset --hard HEAD" && + + echo "*.utf${i}be text working-tree-encoding=utf-${i}be" >>.gitattributes && + echo "*.utf${i}le text working-tree-encoding=utf-${i}LE" >>.gitattributes && + + # Here we add a UTF-16 (resp. UTF-32) files with BOM (big/little-endian) + # but we tell Git to treat it as UTF-16BE/UTF-16LE (resp. UTF-32). + # In these cases the BOM is prohibited. + cp bebom.utf${i}be.raw bebom.utf${i}be && + test_must_fail git add bebom.utf${i}be 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}be" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out && + + cp lebom.utf${i}le.raw lebom.utf${i}be && + test_must_fail git add lebom.utf${i}be 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}be" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out && + + cp bebom.utf${i}be.raw bebom.utf${i}le && + test_must_fail git add bebom.utf${i}le 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}LE" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out && + + cp lebom.utf${i}le.raw lebom.utf${i}le && + test_must_fail git add lebom.utf${i}le 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}LE" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out + ' + + test_expect_success "check required UTF-${i} BOM" ' + test_when_finished "git reset --hard HEAD" && + + echo "*.utf${i} text working-tree-encoding=utf-${i}" >>.gitattributes && + + cp nobom.utf${i}be.raw nobom.utf${i} && + test_must_fail git add nobom.utf${i} 2>err.out && + test_i18ngrep "fatal: BOM is required .* utf-${i}" err.out && + test_i18ngrep "use UTF-${i}BE or UTF-${i}LE" err.out && + + cp nobom.utf${i}le.raw nobom.utf${i} && + test_must_fail git add nobom.utf${i} 2>err.out && + test_i18ngrep "fatal: BOM is required .* utf-${i}" err.out && + test_i18ngrep "use UTF-${i}BE or UTF-${i}LE" err.out + ' + + test_expect_success "eol conversion for UTF-${i} encoded files on checkout" ' + test_when_finished "rm -f crlf.utf${i}.raw lf.utf${i}.raw" && + test_when_finished "git reset --hard HEAD^" && + + cat lf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >lf.utf${i}.raw && + cat crlf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >crlf.utf${i}.raw && + cp crlf.utf${i}.raw eol.utf${i} && + + cat >expectIndexLF <<-EOF && + i/lf w/-text attr/text eol.utf${i} + EOF + + git add eol.utf${i} && + git commit -m eol && + + # UTF-${i} with CRLF (Windows line endings) + rm eol.utf${i} && + git -c core.eol=crlf checkout eol.utf${i} && + test_cmp_bin crlf.utf${i}.raw eol.utf${i} && + + # Although the file has CRLF in the working tree, + # ensure LF in the index + git ls-files --eol eol.utf${i} >actual && + test_cmp expectIndexLF actual && + + # UTF-${i} with LF (Unix line endings) + rm eol.utf${i} && + git -c core.eol=lf checkout eol.utf${i} && + test_cmp_bin lf.utf${i}.raw eol.utf${i} && + + # The file LF in the working tree, ensure LF in the index + git ls-files --eol eol.utf${i} >actual && + test_cmp expectIndexLF actual + ' +done + +test_expect_success 'check unsupported encodings' ' + test_when_finished "git reset --hard HEAD" && + + echo "*.set text working-tree-encoding" >.gitattributes && + printf "set" >t.set && + test_must_fail git add t.set 2>err.out && + test_i18ngrep "true/false are no valid working-tree-encodings" err.out && + + echo "*.unset text -working-tree-encoding" >.gitattributes && + printf "unset" >t.unset && + git add t.unset && + + echo "*.empty text working-tree-encoding=" >.gitattributes && + printf "empty" >t.empty && + git add t.empty && + + echo "*.garbage text working-tree-encoding=garbage" >.gitattributes && + printf "garbage" >t.garbage && + test_must_fail git add t.garbage 2>err.out && + test_i18ngrep "failed to encode" err.out +' + +test_expect_success 'error if encoding round trip is not the same during refresh' ' + BEFORE_STATE=$(git rev-parse HEAD) && + test_when_finished "git reset --hard $BEFORE_STATE" && + + # Add and commit a UTF-16 file but skip the "working-tree-encoding" + # filter. Consequently, the in-repo representation is UTF-16 and not + # UTF-8. This simulates a Git version that has no working tree encoding + # support. + echo "*.utf16le text working-tree-encoding=utf-16le" >.gitattributes && + echo "hallo" >nonsense.utf16le && + TEST_HASH=$(git hash-object --no-filters -w nonsense.utf16le) && + git update-index --add --cacheinfo 100644 $TEST_HASH nonsense.utf16le && + COMMIT=$(git commit-tree -p $(git rev-parse HEAD) -m "plain commit" $(git write-tree)) && + git update-ref refs/heads/master $COMMIT && + + test_must_fail git checkout HEAD^ 2>err.out && + test_i18ngrep "error: .* overwritten by checkout:" err.out +' + +test_expect_success 'error if encoding garbage is already in Git' ' + BEFORE_STATE=$(git rev-parse HEAD) && + test_when_finished "git reset --hard $BEFORE_STATE" && + + # Skip the UTF-16 filter for the added file + # This simulates a Git version that has no checkoutEncoding support + cp nobom.utf16be.raw nonsense.utf16 && + TEST_HASH=$(git hash-object --no-filters -w nonsense.utf16) && + git update-index --add --cacheinfo 100644 $TEST_HASH nonsense.utf16 && + COMMIT=$(git commit-tree -p $(git rev-parse HEAD) -m "plain commit" $(git write-tree)) && + git update-ref refs/heads/master $COMMIT && + + git diff 2>err.out && + test_i18ngrep "error: BOM is required" err.out +' + +test_expect_success 'check roundtrip encoding' ' + test_when_finished "rm -f roundtrip.shift roundtrip.utf16" && + test_when_finished "git reset --hard HEAD" && + + text="hallo there!\nroundtrip test here!" && + printf "$text" | iconv -f UTF-8 -t SHIFT-JIS >roundtrip.shift && + printf "$text" | iconv -f UTF-8 -t UTF-16 >roundtrip.utf16 && + echo "*.shift text working-tree-encoding=SHIFT-JIS" >>.gitattributes && + + # SHIFT-JIS encoded files are round-trip checked by default... + GIT_TRACE=1 git add .gitattributes roundtrip.shift 2>&1 | + grep "Checking roundtrip encoding for SHIFT-JIS" && + git reset && + + # ... unless we overwrite the Git config! + ! GIT_TRACE=1 git -c core.checkRoundtripEncoding=garbage \ + add .gitattributes roundtrip.shift 2>&1 | + grep "Checking roundtrip encoding for SHIFT-JIS" && + git reset && + + # UTF-16 encoded files should not be round-trip checked by default... + ! GIT_TRACE=1 git add roundtrip.utf16 2>&1 | + grep "Checking roundtrip encoding for UTF-16" && + git reset && + + # ... unless we tell Git to check it! + GIT_TRACE=1 git -c core.checkRoundtripEncoding="UTF-16, UTF-32" \ + add roundtrip.utf16 2>&1 | + grep "Checking roundtrip encoding for utf-16" && + git reset && + + # ... unless we tell Git to check it! + # (here we also check that the casing of the encoding is irrelevant) + GIT_TRACE=1 git -c core.checkRoundtripEncoding="UTF-32, utf-16" \ + add roundtrip.utf16 2>&1 | + grep "Checking roundtrip encoding for utf-16" && + git reset +' + +test_done diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index 0c2fc81d7b..04d474c84f 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -291,7 +291,7 @@ test_expect_success 'OPT_CALLBACK() and OPT_BIT() work' ' test_expect_success 'OPT_CALLBACK() and callback errors work' ' test_must_fail test-parse-options --no-length >output 2>output.err && test_i18ncmp expect output && - test_i18ncmp expect.err output.err + test_must_be_empty output.err ' cat >expect <<\EOF diff --git a/t/t0041-usage.sh b/t/t0041-usage.sh new file mode 100755 index 0000000000..5b927b76fe --- /dev/null +++ b/t/t0041-usage.sh @@ -0,0 +1,107 @@ +#!/bin/sh + +test_description='Test commands behavior when given invalid argument value' + +. ./test-lib.sh + +test_expect_success 'setup ' ' + test_commit "v1.0" +' + +test_expect_success 'tag --contains <existent_tag>' ' + git tag --contains "v1.0" >actual 2>actual.err && + grep "v1.0" actual && + test_line_count = 0 actual.err +' + +test_expect_success 'tag --contains <inexistent_tag>' ' + test_must_fail git tag --contains "notag" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'tag --no-contains <existent_tag>' ' + git tag --no-contains "v1.0" >actual 2>actual.err && + test_line_count = 0 actual && + test_line_count = 0 actual.err +' + +test_expect_success 'tag --no-contains <inexistent_tag>' ' + test_must_fail git tag --no-contains "notag" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'tag usage error' ' + test_must_fail git tag --noopt >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "usage" actual.err +' + +test_expect_success 'branch --contains <existent_commit>' ' + git branch --contains "master" >actual 2>actual.err && + test_i18ngrep "master" actual && + test_line_count = 0 actual.err +' + +test_expect_success 'branch --contains <inexistent_commit>' ' + test_must_fail git branch --no-contains "nocommit" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'branch --no-contains <existent_commit>' ' + git branch --no-contains "master" >actual 2>actual.err && + test_line_count = 0 actual && + test_line_count = 0 actual.err +' + +test_expect_success 'branch --no-contains <inexistent_commit>' ' + test_must_fail git branch --no-contains "nocommit" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'branch usage error' ' + test_must_fail git branch --noopt >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "usage" actual.err +' + +test_expect_success 'for-each-ref --contains <existent_object>' ' + git for-each-ref --contains "master" >actual 2>actual.err && + test_line_count = 2 actual && + test_line_count = 0 actual.err +' + +test_expect_success 'for-each-ref --contains <inexistent_object>' ' + test_must_fail git for-each-ref --no-contains "noobject" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'for-each-ref --no-contains <existent_object>' ' + git for-each-ref --no-contains "master" >actual 2>actual.err && + test_line_count = 0 actual && + test_line_count = 0 actual.err +' + +test_expect_success 'for-each-ref --no-contains <inexistent_object>' ' + test_must_fail git for-each-ref --no-contains "noobject" >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "error" actual.err && + test_i18ngrep ! "usage" actual.err +' + +test_expect_success 'for-each-ref usage error' ' + test_must_fail git for-each-ref --noopt >actual 2>actual.err && + test_line_count = 0 actual && + test_i18ngrep "usage" actual.err +' + +test_done diff --git a/t/t0050-filesystem.sh b/t/t0050-filesystem.sh index b29d749bb7..192c94eccd 100755 --- a/t/t0050-filesystem.sh +++ b/t/t0050-filesystem.sh @@ -80,7 +80,21 @@ test_expect_success 'merge (case change)' ' git merge topic ' - +test_expect_success CASE_INSENSITIVE_FS 'add directory (with different case)' ' + git reset --hard initial && + mkdir -p dir1/dir2 && + echo >dir1/dir2/a && + echo >dir1/dir2/b && + git add dir1/dir2/a && + git add dir1/DIR2/b && + git ls-files >actual && + cat >expected <<-\EOF && + camelcase + dir1/dir2/a + dir1/dir2/b + EOF + test_cmp expected actual +' test_expect_failure CASE_INSENSITIVE_FS 'add (with different case)' ' git reset --hard initial && diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index 3f3357ed9f..21a8b53132 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -8,15 +8,15 @@ test_description='Test various path utilities' . ./test-lib.sh norm_path() { - expected=$(test-path-utils print_path "$2") + expected=$(test-tool path-utils print_path "$2") test_expect_success $3 "normalize path: $1 => $2" \ - "test \"\$(test-path-utils normalize_path_copy '$1')\" = '$expected'" + "test \"\$(test-tool path-utils normalize_path_copy '$1')\" = '$expected'" } relative_path() { - expected=$(test-path-utils print_path "$3") + expected=$(test-tool path-utils print_path "$3") test_expect_success $4 "relative path: $1 $2 => $3" \ - "test \"\$(test-path-utils relative_path '$1' '$2')\" = '$expected'" + "test \"\$(test-tool path-utils relative_path '$1' '$2')\" = '$expected'" } test_submodule_relative_url() { @@ -37,7 +37,7 @@ test_git_path() { # On Windows, we are using MSYS's bash, which mangles the paths. # Absolute paths are anchored at the MSYS installation directory, # which means that the path / accounts for this many characters: -rootoff=$(test-path-utils normalize_path_copy / | wc -c) +rootoff=$(test-tool path-utils normalize_path_copy / | wc -c) # Account for the trailing LF: if test $rootoff = 2; then rootoff= # we are on Unix @@ -46,7 +46,7 @@ else # In MSYS2, the root directory "/" is translated into a Windows # directory *with* trailing slash. Let's test for that and adjust # our expected longest ancestor length accordingly. - case "$(test-path-utils print_path /)" in + case "$(test-tool path-utils print_path /)" in */) rootslash=1;; *) rootslash=0;; esac @@ -61,7 +61,7 @@ ancestor() { expected=$(($expected+$rootoff)) fi test_expect_success "longest ancestor: $1 $2 => $expected" \ - "actual=\$(test-path-utils longest_ancestor_length '$1' '$2') && + "actual=\$(test-tool path-utils longest_ancestor_length '$1' '$2') && test \"\$actual\" = '$expected'" } @@ -77,8 +77,8 @@ case $(uname -s) in ;; esac -test_expect_success basename 'test-path-utils basename' -test_expect_success dirname 'test-path-utils dirname' +test_expect_success basename 'test-tool path-utils basename' +test_expect_success dirname 'test-tool path-utils dirname' norm_path "" "" norm_path . "" @@ -157,48 +157,48 @@ ancestor /foo/bar /foo:/bar 4 ancestor /foo/bar /bar -1 test_expect_success 'strip_path_suffix' ' - test c:/msysgit = $(test-path-utils strip_path_suffix \ + test c:/msysgit = $(test-tool path-utils strip_path_suffix \ c:/msysgit/libexec//git-core libexec/git-core) ' test_expect_success 'absolute path rejects the empty string' ' - test_must_fail test-path-utils absolute_path "" + test_must_fail test-tool path-utils absolute_path "" ' test_expect_success 'real path rejects the empty string' ' - test_must_fail test-path-utils real_path "" + test_must_fail test-tool path-utils real_path "" ' test_expect_success POSIX 'real path works on absolute paths 1' ' nopath="hopefully-absent-path" && - test "/" = "$(test-path-utils real_path "/")" && - test "/$nopath" = "$(test-path-utils real_path "/$nopath")" + test "/" = "$(test-tool path-utils real_path "/")" && + test "/$nopath" = "$(test-tool path-utils real_path "/$nopath")" ' test_expect_success 'real path works on absolute paths 2' ' nopath="hopefully-absent-path" && # Find an existing top-level directory for the remaining tests: d=$(pwd -P | sed -e "s|^\([^/]*/[^/]*\)/.*|\1|") && - test "$d" = "$(test-path-utils real_path "$d")" && - test "$d/$nopath" = "$(test-path-utils real_path "$d/$nopath")" + test "$d" = "$(test-tool path-utils real_path "$d")" && + test "$d/$nopath" = "$(test-tool path-utils real_path "$d/$nopath")" ' test_expect_success POSIX 'real path removes extra leading slashes' ' nopath="hopefully-absent-path" && - test "/" = "$(test-path-utils real_path "///")" && - test "/$nopath" = "$(test-path-utils real_path "///$nopath")" && + test "/" = "$(test-tool path-utils real_path "///")" && + test "/$nopath" = "$(test-tool path-utils real_path "///$nopath")" && # Find an existing top-level directory for the remaining tests: d=$(pwd -P | sed -e "s|^\([^/]*/[^/]*\)/.*|\1|") && - test "$d" = "$(test-path-utils real_path "//$d")" && - test "$d/$nopath" = "$(test-path-utils real_path "//$d/$nopath")" + test "$d" = "$(test-tool path-utils real_path "//$d")" && + test "$d/$nopath" = "$(test-tool path-utils real_path "//$d/$nopath")" ' test_expect_success 'real path removes other extra slashes' ' nopath="hopefully-absent-path" && # Find an existing top-level directory for the remaining tests: d=$(pwd -P | sed -e "s|^\([^/]*/[^/]*\)/.*|\1|") && - test "$d" = "$(test-path-utils real_path "$d///")" && - test "$d/$nopath" = "$(test-path-utils real_path "$d///$nopath")" + test "$d" = "$(test-tool path-utils real_path "$d///")" && + test "$d/$nopath" = "$(test-tool path-utils real_path "$d///$nopath")" ' test_expect_success SYMLINKS 'real path works on symlinks' ' @@ -209,35 +209,35 @@ test_expect_success SYMLINKS 'real path works on symlinks' ' mkdir third && dir="$(cd .git; pwd -P)" && dir2=third/../second/other/.git && - test "$dir" = "$(test-path-utils real_path $dir2)" && + test "$dir" = "$(test-tool path-utils real_path $dir2)" && file="$dir"/index && - test "$file" = "$(test-path-utils real_path $dir2/index)" && + test "$file" = "$(test-tool path-utils real_path $dir2/index)" && basename=blub && - test "$dir/$basename" = "$(cd .git && test-path-utils real_path "$basename")" && + test "$dir/$basename" = "$(cd .git && test-tool path-utils real_path "$basename")" && ln -s ../first/file .git/syml && sym="$(cd first; pwd -P)"/file && - test "$sym" = "$(test-path-utils real_path "$dir2/syml")" + test "$sym" = "$(test-tool path-utils real_path "$dir2/syml")" ' test_expect_success SYMLINKS 'prefix_path works with absolute paths to work tree symlinks' ' ln -s target symlink && - test "$(test-path-utils prefix_path prefix "$(pwd)/symlink")" = "symlink" + test "$(test-tool path-utils prefix_path prefix "$(pwd)/symlink")" = "symlink" ' test_expect_success 'prefix_path works with only absolute path to work tree' ' echo "" >expected && - test-path-utils prefix_path prefix "$(pwd)" >actual && + test-tool path-utils prefix_path prefix "$(pwd)" >actual && test_cmp expected actual ' test_expect_success 'prefix_path rejects absolute path to dir with same beginning as work tree' ' - test_must_fail test-path-utils prefix_path prefix "$(pwd)a" + test_must_fail test-tool path-utils prefix_path prefix "$(pwd)a" ' test_expect_success SYMLINKS 'prefix_path works with absolute path to a symlink to work tree having same beginning as work tree' ' git init repo && ln -s repo repolink && - test "a" = "$(cd repo && test-path-utils prefix_path prefix "$(pwd)/../repolink/a")" + test "a" = "$(cd repo && test-tool path-utils prefix_path prefix "$(pwd)/../repolink/a")" ' relative_path /foo/a/b/c/ /foo/a/b/ c/ @@ -350,7 +350,7 @@ test_submodule_relative_url "(null)" "user@host:path/to/repo" "../subrepo" "user test_submodule_relative_url "(null)" "user@host:repo" "../subrepo" "user@host:subrepo" test_expect_success 'match .gitmodules' ' - test-path-utils is_dotgitmodules \ + test-tool path-utils is_dotgitmodules \ .gitmodules \ \ .git${u200c}modules \ diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index e4739170aa..c887ed5b45 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -14,13 +14,13 @@ EOF >empty test_expect_success 'start_command reports ENOENT' ' - test-run-command start-command-ENOENT ./does-not-exist + test-tool run-command start-command-ENOENT ./does-not-exist ' test_expect_success 'run_command can run a command' ' cat hello-script >hello.sh && chmod +x hello.sh && - test-run-command run-command ./hello.sh >actual 2>err && + test-tool run-command run-command ./hello.sh >actual 2>err && test_cmp hello-script actual && test_cmp empty err @@ -31,7 +31,7 @@ test_expect_success !MINGW 'run_command can run a script without a #! line' ' cat hello-script EOF chmod +x hello && - test-run-command run-command ./hello >actual 2>err && + test-tool run-command run-command ./hello >actual 2>err && test_cmp hello-script actual && test_cmp empty err @@ -45,7 +45,7 @@ test_expect_success 'run_command does not try to execute a directory' ' EOF PATH=$PWD/bin1:$PWD/bin2:$PATH \ - test-run-command run-command greet >actual 2>err && + test-tool run-command run-command greet >actual 2>err && test_cmp bin2/greet actual && test_cmp empty err ' @@ -62,7 +62,7 @@ test_expect_success POSIXPERM 'run_command passes over non-executable file' ' EOF PATH=$PWD/bin1:$PWD/bin2:$PATH \ - test-run-command run-command greet >actual 2>err && + test-tool run-command run-command greet >actual 2>err && test_cmp bin2/greet actual && test_cmp empty err ' @@ -70,7 +70,7 @@ test_expect_success POSIXPERM 'run_command passes over non-executable file' ' test_expect_success POSIXPERM 'run_command reports EACCES' ' cat hello-script >hello.sh && chmod -x hello.sh && - test_must_fail test-run-command run-command ./hello.sh 2>err && + test_must_fail test-tool run-command run-command ./hello.sh 2>err && grep "fatal: cannot exec.*hello.sh" err ' @@ -104,17 +104,17 @@ World EOF test_expect_success 'run_command runs in parallel with more jobs available than tasks' ' - test-run-command run-command-parallel 5 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test-tool run-command run-command-parallel 5 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && test_cmp expect actual ' test_expect_success 'run_command runs in parallel with as many jobs as tasks' ' - test-run-command run-command-parallel 4 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test-tool run-command run-command-parallel 4 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && test_cmp expect actual ' test_expect_success 'run_command runs in parallel with more tasks than jobs available' ' - test-run-command run-command-parallel 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test-tool run-command run-command-parallel 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && test_cmp expect actual ' @@ -128,7 +128,7 @@ asking for a quick stop EOF test_expect_success 'run_command is asked to abort gracefully' ' - test-run-command run-command-abort 3 false 2>actual && + test-tool run-command run-command-abort 3 false 2>actual && test_cmp expect actual ' @@ -137,8 +137,45 @@ no further jobs available EOF test_expect_success 'run_command outputs ' ' - test-run-command run-command-no-jobs 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && + test-tool run-command run-command-no-jobs 3 sh -c "printf \"%s\n%s\n\" Hello World" 2>actual && test_cmp expect actual ' +test_trace () { + expect="$1" + shift + GIT_TRACE=1 test-tool run-command "$@" run-command true 2>&1 >/dev/null | \ + sed -e 's/.* run_command: //' -e '/trace: .*/d' >actual && + echo "$expect true" >expect && + test_cmp expect actual +} + +test_expect_success 'GIT_TRACE with environment variables' ' + test_trace "abc=1 def=2" env abc=1 env def=2 && + test_trace "abc=2" env abc env abc=1 env abc=2 && + test_trace "abc=2" env abc env abc=2 && + ( + abc=1 && export abc && + test_trace "def=1" env abc=1 env def=1 + ) && + ( + abc=1 && export abc && + test_trace "def=1" env abc env abc=1 env def=1 + ) && + test_trace "def=1" env non-exist env def=1 && + test_trace "abc=2" env abc=1 env abc env abc=2 && + ( + abc=1 def=2 && export abc def && + test_trace "unset abc def;" env abc env def + ) && + ( + abc=1 def=2 && export abc def && + test_trace "unset def; abc=3" env abc env def env abc=3 + ) && + ( + abc=1 && export abc && + test_trace "unset abc;" env abc=2 env abc + ) +' + test_done diff --git a/t/t0062-revision-walking.sh b/t/t0062-revision-walking.sh index 113c728e67..8e215867b8 100755 --- a/t/t0062-revision-walking.sh +++ b/t/t0062-revision-walking.sh @@ -26,7 +26,7 @@ test_expect_success 'setup' ' ' test_expect_success 'revision walking can be done twice' ' - test-revision-walking run-twice >run_twice_actual && + test-tool revision-walking run-twice >run_twice_actual && test_cmp run_twice_expected run_twice_actual ' diff --git a/t/t0063-string-list.sh b/t/t0063-string-list.sh index dbfc05ebdc..c6ee9f66b1 100755 --- a/t/t0063-string-list.sh +++ b/t/t0063-string-list.sh @@ -10,9 +10,9 @@ test_description='Test string list functionality' test_split () { cat >expected && test_expect_success "split $1 at $2, max $3" " - test-string-list split '$1' '$2' '$3' >actual && + test-tool string-list split '$1' '$2' '$3' >actual && test_cmp expected actual && - test-string-list split_in_place '$1' '$2' '$3' >actual && + test-tool string-list split_in_place '$1' '$2' '$3' >actual && test_cmp expected actual " } @@ -61,31 +61,31 @@ test_split ":" ":" "-1" <<EOF EOF test_expect_success "test filter_string_list" ' - test "x-" = "x$(test-string-list filter - y)" && - test "x-" = "x$(test-string-list filter no y)" && - test yes = "$(test-string-list filter yes y)" && - test yes = "$(test-string-list filter no:yes y)" && - test yes = "$(test-string-list filter yes:no y)" && - test y1:y2 = "$(test-string-list filter y1:y2 y)" && - test y2:y1 = "$(test-string-list filter y2:y1 y)" && - test "x-" = "x$(test-string-list filter x1:x2 y)" + test "x-" = "x$(test-tool string-list filter - y)" && + test "x-" = "x$(test-tool string-list filter no y)" && + test yes = "$(test-tool string-list filter yes y)" && + test yes = "$(test-tool string-list filter no:yes y)" && + test yes = "$(test-tool string-list filter yes:no y)" && + test y1:y2 = "$(test-tool string-list filter y1:y2 y)" && + test y2:y1 = "$(test-tool string-list filter y2:y1 y)" && + test "x-" = "x$(test-tool string-list filter x1:x2 y)" ' test_expect_success "test remove_duplicates" ' - test "x-" = "x$(test-string-list remove_duplicates -)" && - test "x" = "x$(test-string-list remove_duplicates "")" && - test a = "$(test-string-list remove_duplicates a)" && - test a = "$(test-string-list remove_duplicates a:a)" && - test a = "$(test-string-list remove_duplicates a:a:a:a:a)" && - test a:b = "$(test-string-list remove_duplicates a:b)" && - test a:b = "$(test-string-list remove_duplicates a:a:b)" && - test a:b = "$(test-string-list remove_duplicates a:b:b)" && - test a:b:c = "$(test-string-list remove_duplicates a:b:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:a:b:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:b:b:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:b:c:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:a:b:b:c:c)" && - test a:b:c = "$(test-string-list remove_duplicates a:a:a:b:b:b:c:c:c)" + test "x-" = "x$(test-tool string-list remove_duplicates -)" && + test "x" = "x$(test-tool string-list remove_duplicates "")" && + test a = "$(test-tool string-list remove_duplicates a)" && + test a = "$(test-tool string-list remove_duplicates a:a)" && + test a = "$(test-tool string-list remove_duplicates a:a:a:a:a)" && + test a:b = "$(test-tool string-list remove_duplicates a:b)" && + test a:b = "$(test-tool string-list remove_duplicates a:a:b)" && + test a:b = "$(test-tool string-list remove_duplicates a:b:b)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:b:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:a:b:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:b:b:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:b:c:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:a:b:b:c:c)" && + test a:b:c = "$(test-tool string-list remove_duplicates a:a:a:b:b:b:c:c:c)" ' test_done diff --git a/t/t0064-sha1-array.sh b/t/t0064-sha1-array.sh index 50b31ffe75..67484502a0 100755 --- a/t/t0064-sha1-array.sh +++ b/t/t0064-sha1-array.sh @@ -18,7 +18,7 @@ test_expect_success 'ordered enumeration' ' { echo20 append 88 44 aa 55 && echo for_each_unique - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && test_cmp expect actual ' @@ -28,7 +28,7 @@ test_expect_success 'ordered enumeration with duplicate suppression' ' echo20 append 88 44 aa 55 && echo20 append 88 44 aa 55 && echo for_each_unique - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && test_cmp expect actual ' @@ -36,7 +36,7 @@ test_expect_success 'lookup' ' { echo20 append 88 44 aa 55 && echo20 lookup 55 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -eq 1 ' @@ -45,7 +45,7 @@ test_expect_success 'lookup non-existing entry' ' { echo20 append 88 44 aa 55 && echo20 lookup 33 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -lt 0 ' @@ -55,7 +55,7 @@ test_expect_success 'lookup with duplicates' ' echo20 append 88 44 aa 55 && echo20 append 88 44 aa 55 && echo20 lookup 55 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -ge 2 && test "$n" -le 3 @@ -66,7 +66,7 @@ test_expect_success 'lookup non-existing entry with duplicates' ' echo20 append 88 44 aa 55 && echo20 append 88 44 aa 55 && echo20 lookup 66 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -lt 0 ' @@ -76,7 +76,7 @@ test_expect_success 'lookup with almost duplicate values' ' echo "append 5555555555555555555555555555555555555555" && echo "append 555555555555555555555555555555555555555f" && echo20 lookup 55 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -eq 0 ' @@ -85,7 +85,7 @@ test_expect_success 'lookup with single duplicate value' ' { echo20 append 55 55 && echo20 lookup 55 - } | test-sha1-array >actual && + } | test-tool sha1-array >actual && n=$(cat actual) && test "$n" -ge 0 && test "$n" -le 1 diff --git a/t/t0065-strcmp-offset.sh b/t/t0065-strcmp-offset.sh index 7d6d21425f..91fa639c4a 100755 --- a/t/t0065-strcmp-offset.sh +++ b/t/t0065-strcmp-offset.sh @@ -8,7 +8,7 @@ while read s1 s2 expect do test_expect_success "strcmp_offset($s1, $s2)" ' echo "$expect" >expect && - test-strcmp-offset "$s1" "$s2" >actual && + test-tool strcmp-offset "$s1" "$s2" >actual && test_cmp expect actual ' done <<-EOF diff --git a/t/t0070-fundamental.sh b/t/t0070-fundamental.sh index 991ed2a48d..7b111a56fd 100755 --- a/t/t0070-fundamental.sh +++ b/t/t0070-fundamental.sh @@ -9,19 +9,19 @@ Verify wrappers and compatibility functions. . ./test-lib.sh test_expect_success 'character classes (isspace, isalpha etc.)' ' - test-ctype + test-tool ctype ' test_expect_success 'mktemp to nonexistent directory prints filename' ' - test_must_fail test-mktemp doesnotexist/testXXXXXX 2>err && + test_must_fail test-tool mktemp doesnotexist/testXXXXXX 2>err && grep "doesnotexist/test" err ' test_expect_success POSIXPERM,SANITY 'mktemp to unwritable directory prints filename' ' mkdir cannotwrite && - chmod -w cannotwrite && test_when_finished "chmod +w cannotwrite" && - test_must_fail test-mktemp cannotwrite/testXXXXXX 2>err && + chmod -w cannotwrite && + test_must_fail test-tool mktemp cannotwrite/testXXXXXX 2>err && grep "cannotwrite/test" err ' @@ -31,7 +31,7 @@ test_expect_success 'git_mkstemps_mode does not fail if fd 0 is not open' ' test_expect_success 'check for a bug in the regex routines' ' # if this test fails, re-build git with NO_REGEX=1 - test-regex --bug + test-tool regex --bug ' test_done diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh index adfd4f0b5e..0c61268fd2 100755 --- a/t/t0090-cache-tree.sh +++ b/t/t0090-cache-tree.sh @@ -8,13 +8,13 @@ cache-tree extension. . ./test-lib.sh cmp_cache_tree () { - test-dump-cache-tree | sed -e '/#(ref)/d' >actual && - sed "s/$_x40/SHA/" <actual >filtered && + test-tool dump-cache-tree | sed -e '/#(ref)/d' >actual && + sed "s/$OID_REGEX/SHA/" <actual >filtered && test_cmp "$1" filtered } # We don't bother with actually checking the SHA1: -# test-dump-cache-tree already verifies that all existing data is +# test-tool dump-cache-tree already verifies that all existing data is # correct. generate_expected_cache_tree_rec () { dir="$1${1:+/}" && @@ -47,7 +47,7 @@ test_cache_tree () { test_invalid_cache_tree () { printf "invalid %s ()\n" "" "$@" >expect && - test-dump-cache-tree | + test-tool dump-cache-tree | sed -n -e "s/[0-9]* subtrees//" -e '/#(ref)/d' -e '/^invalid /p' >actual && test_cmp expect actual } @@ -115,14 +115,14 @@ test_expect_success 'update-index invalidates cache-tree' ' ' test_expect_success 'write-tree establishes cache-tree' ' - test-scrap-cache-tree && + test-tool scrap-cache-tree && git write-tree && test_cache_tree ' -test_expect_success 'test-scrap-cache-tree works' ' +test_expect_success 'test-tool scrap-cache-tree works' ' git read-tree HEAD && - test-scrap-cache-tree && + test-tool scrap-cache-tree && test_no_cache_tree ' @@ -170,7 +170,7 @@ test_expect_success 'commit in child dir has cache-tree' ' ' test_expect_success 'reset --hard gives cache-tree' ' - test-scrap-cache-tree && + test-tool scrap-cache-tree && git reset --hard && test_cache_tree ' @@ -246,9 +246,9 @@ test_expect_success 'switching trees does not invalidate shared index' ' git update-index --split-index && >split && git add split && - test-dump-split-index .git/index | grep -v ^own >before && + test-tool dump-split-index .git/index | grep -v ^own >before && git commit -m "as-is" && - test-dump-split-index .git/index | grep -v ^own >after && + test-tool dump-split-index .git/index | grep -v ^own >after && test_cmp before after ' diff --git a/t/t0110-urlmatch-normalization.sh b/t/t0110-urlmatch-normalization.sh index 410d5768ca..f99529d838 100755 --- a/t/t0110-urlmatch-normalization.sh +++ b/t/t0110-urlmatch-normalization.sh @@ -9,172 +9,172 @@ tu="$TEST_DIRECTORY/t0110/url" # Note that only file: URLs should be allowed without a host test_expect_success 'url scheme' ' - ! test-urlmatch-normalization "" && - ! test-urlmatch-normalization "_" && - ! test-urlmatch-normalization "scheme" && - ! test-urlmatch-normalization "scheme:" && - ! test-urlmatch-normalization "scheme:/" && - ! test-urlmatch-normalization "scheme://" && - ! test-urlmatch-normalization "file" && - ! test-urlmatch-normalization "file:" && - ! test-urlmatch-normalization "file:/" && - test-urlmatch-normalization "file://" && - ! test-urlmatch-normalization "://acme.co" && - ! test-urlmatch-normalization "x_test://acme.co" && - ! test-urlmatch-normalization "-test://acme.co" && - ! test-urlmatch-normalization "0test://acme.co" && - ! test-urlmatch-normalization "+test://acme.co" && - ! test-urlmatch-normalization ".test://acme.co" && - ! test-urlmatch-normalization "schem%6e://" && - test-urlmatch-normalization "x-Test+v1.0://acme.co" && - test "$(test-urlmatch-normalization -p "AbCdeF://x.Y")" = "abcdef://x.y/" + ! test-tool urlmatch-normalization "" && + ! test-tool urlmatch-normalization "_" && + ! test-tool urlmatch-normalization "scheme" && + ! test-tool urlmatch-normalization "scheme:" && + ! test-tool urlmatch-normalization "scheme:/" && + ! test-tool urlmatch-normalization "scheme://" && + ! test-tool urlmatch-normalization "file" && + ! test-tool urlmatch-normalization "file:" && + ! test-tool urlmatch-normalization "file:/" && + test-tool urlmatch-normalization "file://" && + ! test-tool urlmatch-normalization "://acme.co" && + ! test-tool urlmatch-normalization "x_test://acme.co" && + ! test-tool urlmatch-normalization "-test://acme.co" && + ! test-tool urlmatch-normalization "0test://acme.co" && + ! test-tool urlmatch-normalization "+test://acme.co" && + ! test-tool urlmatch-normalization ".test://acme.co" && + ! test-tool urlmatch-normalization "schem%6e://" && + test-tool urlmatch-normalization "x-Test+v1.0://acme.co" && + test "$(test-tool urlmatch-normalization -p "AbCdeF://x.Y")" = "abcdef://x.y/" ' test_expect_success 'url authority' ' - ! test-urlmatch-normalization "scheme://user:pass@" && - ! test-urlmatch-normalization "scheme://?" && - ! test-urlmatch-normalization "scheme://#" && - ! test-urlmatch-normalization "scheme:///" && - ! test-urlmatch-normalization "scheme://:" && - ! test-urlmatch-normalization "scheme://:555" && - test-urlmatch-normalization "file://user:pass@" && - test-urlmatch-normalization "file://?" && - test-urlmatch-normalization "file://#" && - test-urlmatch-normalization "file:///" && - test-urlmatch-normalization "file://:" && - ! test-urlmatch-normalization "file://:555" && - test-urlmatch-normalization "scheme://user:pass@host" && - test-urlmatch-normalization "scheme://@host" && - test-urlmatch-normalization "scheme://%00@host" && - ! test-urlmatch-normalization "scheme://%%@host" && - ! test-urlmatch-normalization "scheme://host_" && - test-urlmatch-normalization "scheme://user:pass@host/" && - test-urlmatch-normalization "scheme://@host/" && - test-urlmatch-normalization "scheme://host/" && - test-urlmatch-normalization "scheme://host?x" && - test-urlmatch-normalization "scheme://host#x" && - test-urlmatch-normalization "scheme://host/@" && - test-urlmatch-normalization "scheme://host?@x" && - test-urlmatch-normalization "scheme://host#@x" && - test-urlmatch-normalization "scheme://[::1]" && - test-urlmatch-normalization "scheme://[::1]/" && - ! test-urlmatch-normalization "scheme://hos%41/" && - test-urlmatch-normalization "scheme://[invalid....:/" && - test-urlmatch-normalization "scheme://invalid....:]/" && - ! test-urlmatch-normalization "scheme://invalid....:[/" && - ! test-urlmatch-normalization "scheme://invalid....:[" + ! test-tool urlmatch-normalization "scheme://user:pass@" && + ! test-tool urlmatch-normalization "scheme://?" && + ! test-tool urlmatch-normalization "scheme://#" && + ! test-tool urlmatch-normalization "scheme:///" && + ! test-tool urlmatch-normalization "scheme://:" && + ! test-tool urlmatch-normalization "scheme://:555" && + test-tool urlmatch-normalization "file://user:pass@" && + test-tool urlmatch-normalization "file://?" && + test-tool urlmatch-normalization "file://#" && + test-tool urlmatch-normalization "file:///" && + test-tool urlmatch-normalization "file://:" && + ! test-tool urlmatch-normalization "file://:555" && + test-tool urlmatch-normalization "scheme://user:pass@host" && + test-tool urlmatch-normalization "scheme://@host" && + test-tool urlmatch-normalization "scheme://%00@host" && + ! test-tool urlmatch-normalization "scheme://%%@host" && + ! test-tool urlmatch-normalization "scheme://host_" && + test-tool urlmatch-normalization "scheme://user:pass@host/" && + test-tool urlmatch-normalization "scheme://@host/" && + test-tool urlmatch-normalization "scheme://host/" && + test-tool urlmatch-normalization "scheme://host?x" && + test-tool urlmatch-normalization "scheme://host#x" && + test-tool urlmatch-normalization "scheme://host/@" && + test-tool urlmatch-normalization "scheme://host?@x" && + test-tool urlmatch-normalization "scheme://host#@x" && + test-tool urlmatch-normalization "scheme://[::1]" && + test-tool urlmatch-normalization "scheme://[::1]/" && + ! test-tool urlmatch-normalization "scheme://hos%41/" && + test-tool urlmatch-normalization "scheme://[invalid....:/" && + test-tool urlmatch-normalization "scheme://invalid....:]/" && + ! test-tool urlmatch-normalization "scheme://invalid....:[/" && + ! test-tool urlmatch-normalization "scheme://invalid....:[" ' test_expect_success 'url port checks' ' - test-urlmatch-normalization "xyz://q@some.host:" && - test-urlmatch-normalization "xyz://q@some.host:456/" && - ! test-urlmatch-normalization "xyz://q@some.host:0" && - ! test-urlmatch-normalization "xyz://q@some.host:0000000" && - test-urlmatch-normalization "xyz://q@some.host:0000001?" && - test-urlmatch-normalization "xyz://q@some.host:065535#" && - test-urlmatch-normalization "xyz://q@some.host:65535" && - ! test-urlmatch-normalization "xyz://q@some.host:65536" && - ! test-urlmatch-normalization "xyz://q@some.host:99999" && - ! test-urlmatch-normalization "xyz://q@some.host:100000" && - ! test-urlmatch-normalization "xyz://q@some.host:100001" && - test-urlmatch-normalization "http://q@some.host:80" && - test-urlmatch-normalization "https://q@some.host:443" && - test-urlmatch-normalization "http://q@some.host:80/" && - test-urlmatch-normalization "https://q@some.host:443?" && - ! test-urlmatch-normalization "http://q@:8008" && - ! test-urlmatch-normalization "http://:8080" && - ! test-urlmatch-normalization "http://:" && - test-urlmatch-normalization "xyz://q@some.host:456/" && - test-urlmatch-normalization "xyz://[::1]:456/" && - test-urlmatch-normalization "xyz://[::1]:/" && - ! test-urlmatch-normalization "xyz://[::1]:000/" && - ! test-urlmatch-normalization "xyz://[::1]:0%300/" && - ! test-urlmatch-normalization "xyz://[::1]:0x80/" && - ! test-urlmatch-normalization "xyz://[::1]:4294967297/" && - ! test-urlmatch-normalization "xyz://[::1]:030f/" + test-tool urlmatch-normalization "xyz://q@some.host:" && + test-tool urlmatch-normalization "xyz://q@some.host:456/" && + ! test-tool urlmatch-normalization "xyz://q@some.host:0" && + ! test-tool urlmatch-normalization "xyz://q@some.host:0000000" && + test-tool urlmatch-normalization "xyz://q@some.host:0000001?" && + test-tool urlmatch-normalization "xyz://q@some.host:065535#" && + test-tool urlmatch-normalization "xyz://q@some.host:65535" && + ! test-tool urlmatch-normalization "xyz://q@some.host:65536" && + ! test-tool urlmatch-normalization "xyz://q@some.host:99999" && + ! test-tool urlmatch-normalization "xyz://q@some.host:100000" && + ! test-tool urlmatch-normalization "xyz://q@some.host:100001" && + test-tool urlmatch-normalization "http://q@some.host:80" && + test-tool urlmatch-normalization "https://q@some.host:443" && + test-tool urlmatch-normalization "http://q@some.host:80/" && + test-tool urlmatch-normalization "https://q@some.host:443?" && + ! test-tool urlmatch-normalization "http://q@:8008" && + ! test-tool urlmatch-normalization "http://:8080" && + ! test-tool urlmatch-normalization "http://:" && + test-tool urlmatch-normalization "xyz://q@some.host:456/" && + test-tool urlmatch-normalization "xyz://[::1]:456/" && + test-tool urlmatch-normalization "xyz://[::1]:/" && + ! test-tool urlmatch-normalization "xyz://[::1]:000/" && + ! test-tool urlmatch-normalization "xyz://[::1]:0%300/" && + ! test-tool urlmatch-normalization "xyz://[::1]:0x80/" && + ! test-tool urlmatch-normalization "xyz://[::1]:4294967297/" && + ! test-tool urlmatch-normalization "xyz://[::1]:030f/" ' test_expect_success 'url port normalization' ' - test "$(test-urlmatch-normalization -p "http://x:800")" = "http://x:800/" && - test "$(test-urlmatch-normalization -p "http://x:0800")" = "http://x:800/" && - test "$(test-urlmatch-normalization -p "http://x:00000800")" = "http://x:800/" && - test "$(test-urlmatch-normalization -p "http://x:065535")" = "http://x:65535/" && - test "$(test-urlmatch-normalization -p "http://x:1")" = "http://x:1/" && - test "$(test-urlmatch-normalization -p "http://x:80")" = "http://x/" && - test "$(test-urlmatch-normalization -p "http://x:080")" = "http://x/" && - test "$(test-urlmatch-normalization -p "http://x:000000080")" = "http://x/" && - test "$(test-urlmatch-normalization -p "https://x:443")" = "https://x/" && - test "$(test-urlmatch-normalization -p "https://x:0443")" = "https://x/" && - test "$(test-urlmatch-normalization -p "https://x:000000443")" = "https://x/" + test "$(test-tool urlmatch-normalization -p "http://x:800")" = "http://x:800/" && + test "$(test-tool urlmatch-normalization -p "http://x:0800")" = "http://x:800/" && + test "$(test-tool urlmatch-normalization -p "http://x:00000800")" = "http://x:800/" && + test "$(test-tool urlmatch-normalization -p "http://x:065535")" = "http://x:65535/" && + test "$(test-tool urlmatch-normalization -p "http://x:1")" = "http://x:1/" && + test "$(test-tool urlmatch-normalization -p "http://x:80")" = "http://x/" && + test "$(test-tool urlmatch-normalization -p "http://x:080")" = "http://x/" && + test "$(test-tool urlmatch-normalization -p "http://x:000000080")" = "http://x/" && + test "$(test-tool urlmatch-normalization -p "https://x:443")" = "https://x/" && + test "$(test-tool urlmatch-normalization -p "https://x:0443")" = "https://x/" && + test "$(test-tool urlmatch-normalization -p "https://x:000000443")" = "https://x/" ' test_expect_success 'url general escapes' ' - ! test-urlmatch-normalization "http://x.y?%fg" && - test "$(test-urlmatch-normalization -p "X://W/%7e%41^%3a")" = "x://w/~A%5E%3A" && - test "$(test-urlmatch-normalization -p "X://W/:/?#[]@")" = "x://w/:/?#[]@" && - test "$(test-urlmatch-normalization -p "X://W/$&()*+,;=")" = "x://w/$&()*+,;=" && - test "$(test-urlmatch-normalization -p "X://W/'\''")" = "x://w/'\''" && - test "$(test-urlmatch-normalization -p "X://W?'\!'")" = "x://w/?'\!'" + ! test-tool urlmatch-normalization "http://x.y?%fg" && + test "$(test-tool urlmatch-normalization -p "X://W/%7e%41^%3a")" = "x://w/~A%5E%3A" && + test "$(test-tool urlmatch-normalization -p "X://W/:/?#[]@")" = "x://w/:/?#[]@" && + test "$(test-tool urlmatch-normalization -p "X://W/$&()*+,;=")" = "x://w/$&()*+,;=" && + test "$(test-tool urlmatch-normalization -p "X://W/'\''")" = "x://w/'\''" && + test "$(test-tool urlmatch-normalization -p "X://W?'\!'")" = "x://w/?'\!'" ' test_expect_success !MINGW 'url high-bit escapes' ' - test "$(test-urlmatch-normalization -p "$(cat "$tu-1")")" = "x://q/%01%02%03%04%05%06%07%08%0E%0F%10%11%12" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-2")")" = "x://q/%13%14%15%16%17%18%19%1B%1C%1D%1E%1F%7F" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-3")")" = "x://q/%80%81%82%83%84%85%86%87%88%89%8A%8B%8C%8D%8E%8F" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-4")")" = "x://q/%90%91%92%93%94%95%96%97%98%99%9A%9B%9C%9D%9E%9F" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-5")")" = "x://q/%A0%A1%A2%A3%A4%A5%A6%A7%A8%A9%AA%AB%AC%AD%AE%AF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-6")")" = "x://q/%B0%B1%B2%B3%B4%B5%B6%B7%B8%B9%BA%BB%BC%BD%BE%BF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-7")")" = "x://q/%C0%C1%C2%C3%C4%C5%C6%C7%C8%C9%CA%CB%CC%CD%CE%CF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-8")")" = "x://q/%D0%D1%D2%D3%D4%D5%D6%D7%D8%D9%DA%DB%DC%DD%DE%DF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-9")")" = "x://q/%E0%E1%E2%E3%E4%E5%E6%E7%E8%E9%EA%EB%EC%ED%EE%EF" && - test "$(test-urlmatch-normalization -p "$(cat "$tu-10")")" = "x://q/%F0%F1%F2%F3%F4%F5%F6%F7%F8%F9%FA%FB%FC%FD%FE%FF" + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-1")")" = "x://q/%01%02%03%04%05%06%07%08%0E%0F%10%11%12" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-2")")" = "x://q/%13%14%15%16%17%18%19%1B%1C%1D%1E%1F%7F" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-3")")" = "x://q/%80%81%82%83%84%85%86%87%88%89%8A%8B%8C%8D%8E%8F" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-4")")" = "x://q/%90%91%92%93%94%95%96%97%98%99%9A%9B%9C%9D%9E%9F" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-5")")" = "x://q/%A0%A1%A2%A3%A4%A5%A6%A7%A8%A9%AA%AB%AC%AD%AE%AF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-6")")" = "x://q/%B0%B1%B2%B3%B4%B5%B6%B7%B8%B9%BA%BB%BC%BD%BE%BF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-7")")" = "x://q/%C0%C1%C2%C3%C4%C5%C6%C7%C8%C9%CA%CB%CC%CD%CE%CF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-8")")" = "x://q/%D0%D1%D2%D3%D4%D5%D6%D7%D8%D9%DA%DB%DC%DD%DE%DF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-9")")" = "x://q/%E0%E1%E2%E3%E4%E5%E6%E7%E8%E9%EA%EB%EC%ED%EE%EF" && + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-10")")" = "x://q/%F0%F1%F2%F3%F4%F5%F6%F7%F8%F9%FA%FB%FC%FD%FE%FF" ' test_expect_success 'url utf-8 escapes' ' - test "$(test-urlmatch-normalization -p "$(cat "$tu-11")")" = "x://q/%C2%80%DF%BF%E0%A0%80%EF%BF%BD%F0%90%80%80%F0%AF%BF%BD" + test "$(test-tool urlmatch-normalization -p "$(cat "$tu-11")")" = "x://q/%C2%80%DF%BF%E0%A0%80%EF%BF%BD%F0%90%80%80%F0%AF%BF%BD" ' test_expect_success 'url username/password escapes' ' - test "$(test-urlmatch-normalization -p "x://%41%62(^):%70+d@foo")" = "x://Ab(%5E):p+d@foo/" + test "$(test-tool urlmatch-normalization -p "x://%41%62(^):%70+d@foo")" = "x://Ab(%5E):p+d@foo/" ' test_expect_success 'url normalized lengths' ' - test "$(test-urlmatch-normalization -l "Http://%4d%65:%4d^%70@The.Host")" = 25 && - test "$(test-urlmatch-normalization -l "http://%41:%42@x.y/%61/")" = 17 && - test "$(test-urlmatch-normalization -l "http://@x.y/^")" = 15 + test "$(test-tool urlmatch-normalization -l "Http://%4d%65:%4d^%70@The.Host")" = 25 && + test "$(test-tool urlmatch-normalization -l "http://%41:%42@x.y/%61/")" = 17 && + test "$(test-tool urlmatch-normalization -l "http://@x.y/^")" = 15 ' test_expect_success 'url . and .. segments' ' - test "$(test-urlmatch-normalization -p "x://y/.")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/./")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/a/.")" = "x://y/a" && - test "$(test-urlmatch-normalization -p "x://y/a/./")" = "x://y/a/" && - test "$(test-urlmatch-normalization -p "x://y/.?")" = "x://y/?" && - test "$(test-urlmatch-normalization -p "x://y/./?")" = "x://y/?" && - test "$(test-urlmatch-normalization -p "x://y/a/.?")" = "x://y/a?" && - test "$(test-urlmatch-normalization -p "x://y/a/./?")" = "x://y/a/?" && - test "$(test-urlmatch-normalization -p "x://y/a/./b/.././../c")" = "x://y/c" && - test "$(test-urlmatch-normalization -p "x://y/a/./b/../.././c/")" = "x://y/c/" && - test "$(test-urlmatch-normalization -p "x://y/a/./b/.././../c/././.././.")" = "x://y/" && - ! test-urlmatch-normalization "x://y/a/./b/.././../c/././.././.." && - test "$(test-urlmatch-normalization -p "x://y/a/./?/././..")" = "x://y/a/?/././.." && - test "$(test-urlmatch-normalization -p "x://y/%2e/")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/%2E/")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/a/%2e./")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/b/.%2E/")" = "x://y/" && - test "$(test-urlmatch-normalization -p "x://y/c/%2e%2E/")" = "x://y/" + test "$(test-tool urlmatch-normalization -p "x://y/.")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/./")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/a/.")" = "x://y/a" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./")" = "x://y/a/" && + test "$(test-tool urlmatch-normalization -p "x://y/.?")" = "x://y/?" && + test "$(test-tool urlmatch-normalization -p "x://y/./?")" = "x://y/?" && + test "$(test-tool urlmatch-normalization -p "x://y/a/.?")" = "x://y/a?" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./?")" = "x://y/a/?" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./b/.././../c")" = "x://y/c" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./b/../.././c/")" = "x://y/c/" && + test "$(test-tool urlmatch-normalization -p "x://y/a/./b/.././../c/././.././.")" = "x://y/" && + ! test-tool urlmatch-normalization "x://y/a/./b/.././../c/././.././.." && + test "$(test-tool urlmatch-normalization -p "x://y/a/./?/././..")" = "x://y/a/?/././.." && + test "$(test-tool urlmatch-normalization -p "x://y/%2e/")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/%2E/")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/a/%2e./")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/b/.%2E/")" = "x://y/" && + test "$(test-tool urlmatch-normalization -p "x://y/c/%2e%2E/")" = "x://y/" ' # http://@foo specifies an empty user name but does not specify a password # http://foo specifies neither a user name nor a password # So they should not be equivalent test_expect_success 'url equivalents' ' - test-urlmatch-normalization "httP://x" "Http://X/" && - test-urlmatch-normalization "Http://%4d%65:%4d^%70@The.Host" "hTTP://Me:%4D^p@the.HOST:80/" && - ! test-urlmatch-normalization "https://@x.y/^" "httpS://x.y:443/^" && - test-urlmatch-normalization "https://@x.y/^" "httpS://@x.y:0443/^" && - test-urlmatch-normalization "https://@x.y/^/../abc" "httpS://@x.y:0443/abc" && - test-urlmatch-normalization "https://@x.y/^/.." "httpS://@x.y:0443/" + test-tool urlmatch-normalization "httP://x" "Http://X/" && + test-tool urlmatch-normalization "Http://%4d%65:%4d^%70@The.Host" "hTTP://Me:%4D^p@the.HOST:80/" && + ! test-tool urlmatch-normalization "https://@x.y/^" "httpS://x.y:443/^" && + test-tool urlmatch-normalization "https://@x.y/^" "httpS://@x.y:0443/^" && + test-tool urlmatch-normalization "https://@x.y/^/../abc" "httpS://@x.y:0443/abc" && + test-tool urlmatch-normalization "https://@x.y/^/.." "httpS://@x.y:0443/" ' test_done diff --git a/t/t0410-partial-clone.sh b/t/t0410-partial-clone.sh new file mode 100755 index 0000000000..4984ca583d --- /dev/null +++ b/t/t0410-partial-clone.sh @@ -0,0 +1,351 @@ +#!/bin/sh + +test_description='partial clone' + +. ./test-lib.sh + +delete_object () { + rm $1/.git/objects/$(echo $2 | sed -e 's|^..|&/|') +} + +pack_as_from_promisor () { + HASH=$(git -C repo pack-objects .git/objects/pack/pack) && + >repo/.git/objects/pack/pack-$HASH.promisor && + echo $HASH +} + +promise_and_delete () { + HASH=$(git -C repo rev-parse "$1") && + git -C repo tag -a -m message my_annotated_tag "$HASH" && + git -C repo rev-parse my_annotated_tag | pack_as_from_promisor && + # tag -d prints a message to stdout, so redirect it + git -C repo tag -d my_annotated_tag >/dev/null && + delete_object repo "$HASH" +} + +test_expect_success 'extensions.partialclone without filter' ' + test_create_repo server && + git clone --filter="blob:none" "file://$(pwd)/server" client && + git -C client config --unset core.partialclonefilter && + git -C client fetch origin +' + +test_expect_success 'missing reflog object, but promised by a commit, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + C=$(git -C repo commit-tree -m c -p $A HEAD^{tree}) && + + # Reference $A only from reflog, and delete it + git -C repo branch my_branch "$A" && + git -C repo branch -f my_branch my_commit && + delete_object repo "$A" && + + # State that we got $C, which refers to $A, from promisor + printf "$C\n" | pack_as_from_promisor && + + # Normally, it fails + test_must_fail git -C repo fsck && + + # But with the extension, it succeeds + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing reflog object, but promised by a tag, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + git -C repo tag -a -m d my_tag_name $A && + T=$(git -C repo rev-parse my_tag_name) && + git -C repo tag -d my_tag_name && + + # Reference $A only from reflog, and delete it + git -C repo branch my_branch "$A" && + git -C repo branch -f my_branch my_commit && + delete_object repo "$A" && + + # State that we got $T, which refers to $A, from promisor + printf "$T\n" | pack_as_from_promisor && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing reflog object alone fails fsck, even with extension set' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + B=$(git -C repo commit-tree -m b HEAD^{tree}) && + + # Reference $A only from reflog, and delete it + git -C repo branch my_branch "$A" && + git -C repo branch -f my_branch my_commit && + delete_object repo "$A" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + test_must_fail git -C repo fsck +' + +test_expect_success 'missing ref object, but promised, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + + # Reference $A only from ref + git -C repo branch my_branch "$A" && + promise_and_delete "$A" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing object, but promised, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo 1 && + test_commit -C repo 2 && + test_commit -C repo 3 && + git -C repo tag -a annotated_tag -m "annotated tag" && + + C=$(git -C repo rev-parse 1) && + T=$(git -C repo rev-parse 2^{tree}) && + B=$(git hash-object repo/3.t) && + AT=$(git -C repo rev-parse annotated_tag) && + + promise_and_delete "$C" && + promise_and_delete "$T" && + promise_and_delete "$B" && + promise_and_delete "$AT" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck +' + +test_expect_success 'missing CLI object, but promised, passes fsck' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + A=$(git -C repo commit-tree -m a HEAD^{tree}) && + promise_and_delete "$A" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo fsck "$A" +' + +test_expect_success 'fetching of missing objects' ' + rm -rf repo && + test_create_repo server && + test_commit -C server foo && + git -C server repack -a -d --write-bitmap-index && + + git clone "file://$(pwd)/server" repo && + HASH=$(git -C repo rev-parse foo) && + rm -rf repo/.git/objects/* && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "origin" && + git -C repo cat-file -p "$HASH" && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(cat promisorlist | sed "s/promisor$/idx/") && + git verify-pack --verbose "$IDX" | grep "$HASH" +' + +test_expect_success 'rev-list stops traversal at missing and promised commit' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + + FOO=$(git -C repo rev-parse foo) && + promise_and_delete "$FOO" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects bar >out && + grep $(git -C repo rev-parse bar) out && + ! grep $FOO out +' + +test_expect_success 'rev-list stops traversal at missing and promised tree' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + mkdir repo/a_dir && + echo something >repo/a_dir/something && + git -C repo add a_dir/something && + git -C repo commit -m bar && + + # foo^{tree} (tree referenced from commit) + TREE=$(git -C repo rev-parse foo^{tree}) && + + # a tree referenced by HEAD^{tree} (tree referenced from tree) + TREE2=$(git -C repo ls-tree HEAD^{tree} | grep " tree " | head -1 | cut -b13-52) && + + promise_and_delete "$TREE" && + promise_and_delete "$TREE2" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >out && + grep $(git -C repo rev-parse foo) out && + ! grep $TREE out && + grep $(git -C repo rev-parse HEAD) out && + ! grep $TREE2 out +' + +test_expect_success 'rev-list stops traversal at missing and promised blob' ' + rm -rf repo && + test_create_repo repo && + echo something >repo/something && + git -C repo add something && + git -C repo commit -m foo && + + BLOB=$(git -C repo hash-object -w something) && + promise_and_delete "$BLOB" && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >out && + grep $(git -C repo rev-parse HEAD) out && + ! grep $BLOB out +' + +test_expect_success 'rev-list stops traversal at promisor commit, tree, and blob' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + test_commit -C repo baz && + + COMMIT=$(git -C repo rev-parse foo) && + TREE=$(git -C repo rev-parse bar^{tree}) && + BLOB=$(git hash-object repo/baz.t) && + printf "%s\n%s\n%s\n" $COMMIT $TREE $BLOB | pack_as_from_promisor && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects HEAD >out && + ! grep $COMMIT out && + ! grep $TREE out && + ! grep $BLOB out && + grep $(git -C repo rev-parse bar) out # sanity check that some walking was done +' + +test_expect_success 'rev-list accepts missing and promised objects on command line' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo foo && + test_commit -C repo bar && + test_commit -C repo baz && + + COMMIT=$(git -C repo rev-parse foo) && + TREE=$(git -C repo rev-parse bar^{tree}) && + BLOB=$(git hash-object repo/baz.t) && + + promise_and_delete $COMMIT && + promise_and_delete $TREE && + promise_and_delete $BLOB && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo rev-list --exclude-promisor-objects --objects "$COMMIT" "$TREE" "$BLOB" +' + +test_expect_success 'gc does not repack promisor objects' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + TREE_HASH=$(git -C repo rev-parse HEAD^{tree}) && + HASH=$(printf "$TREE_HASH\n" | pack_as_from_promisor) && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo gc && + + # Ensure that the promisor packfile still exists, and remove it + test -e repo/.git/objects/pack/pack-$HASH.pack && + rm repo/.git/objects/pack/pack-$HASH.* && + + # Ensure that the single other pack contains the commit, but not the tree + ls repo/.git/objects/pack/pack-*.pack >packlist && + test_line_count = 1 packlist && + git verify-pack repo/.git/objects/pack/pack-*.pack -v >out && + grep "$(git -C repo rev-parse HEAD)" out && + ! grep "$TREE_HASH" out +' + +test_expect_success 'gc stops traversal when a missing but promised object is reached' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo my_commit && + + TREE_HASH=$(git -C repo rev-parse HEAD^{tree}) && + HASH=$(promise_and_delete $TREE_HASH) && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + git -C repo gc && + + # Ensure that the promisor packfile still exists, and remove it + test -e repo/.git/objects/pack/pack-$HASH.pack && + rm repo/.git/objects/pack/pack-$HASH.* && + + # Ensure that the single other pack contains the commit, but not the tree + ls repo/.git/objects/pack/pack-*.pack >packlist && + test_line_count = 1 packlist && + git verify-pack repo/.git/objects/pack/pack-*.pack -v >out && + grep "$(git -C repo rev-parse HEAD)" out && + ! grep "$TREE_HASH" out +' + +LIB_HTTPD_PORT=12345 # default port, 410, cannot be used as non-root +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'fetching of missing objects from an HTTP server' ' + rm -rf repo && + SERVER="$HTTPD_DOCUMENT_ROOT_PATH/server" && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" foo && + git -C "$SERVER" repack -a -d --write-bitmap-index && + + git clone $HTTPD_URL/smart/server repo && + HASH=$(git -C repo rev-parse foo) && + rm -rf repo/.git/objects/* && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "origin" && + git -C repo cat-file -p "$HASH" && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(cat promisorlist | sed "s/promisor$/idx/") && + git verify-pack --verbose "$IDX" | grep "$HASH" +' + +stop_httpd + +test_done diff --git a/t/t1000-read-tree-m-3way.sh b/t/t1000-read-tree-m-3way.sh index 3c4d2d6045..013c5a7bc3 100755 --- a/t/t1000-read-tree-m-3way.sh +++ b/t/t1000-read-tree-m-3way.sh @@ -128,7 +128,7 @@ cat >expected <<\EOF EOF check_result () { - git ls-files --stage | sed -e 's/ '"$_x40"' / X /' >current && + git ls-files --stage | sed -e 's/ '"$OID_REGEX"' / X /' >current && test_cmp expected current } diff --git a/t/t1001-read-tree-m-2way.sh b/t/t1001-read-tree-m-2way.sh index 5ededd8e40..1057a96b24 100755 --- a/t/t1001-read-tree-m-2way.sh +++ b/t/t1001-read-tree-m-2way.sh @@ -30,7 +30,7 @@ read_tree_twoway () { compare_change () { sed -n >current \ -e '/^--- /d; /^+++ /d; /^@@ /d;' \ - -e 's/^\([-+][0-7][0-7][0-7][0-7][0-7][0-7]\) '"$_x40"' /\1 X /p' \ + -e 's/^\([-+][0-7][0-7][0-7][0-7][0-7][0-7]\) '"$OID_REGEX"' /\1 X /p' \ "$1" test_cmp expected current } diff --git a/t/t1002-read-tree-m-u-2way.sh b/t/t1002-read-tree-m-u-2way.sh index 7ca2e65d10..9c05f5e1f5 100755 --- a/t/t1002-read-tree-m-u-2way.sh +++ b/t/t1002-read-tree-m-u-2way.sh @@ -16,7 +16,7 @@ compare_change () { -e '1{/^diff --git /d;}' \ -e '2{/^index /d;}' \ -e '/^--- /d; /^+++ /d; /^@@ /d;' \ - -e 's/^\(.[0-7][0-7][0-7][0-7][0-7][0-7]\) '"$_x40"' /\1 X /' "$1" + -e 's/^\(.[0-7][0-7][0-7][0-7][0-7][0-7]\) '"$OID_REGEX"' /\1 X /' "$1" test_cmp expected current } diff --git a/t/t1004-read-tree-m-u-wf.sh b/t/t1004-read-tree-m-u-wf.sh index c7ce5d8bb5..826cd32e23 100755 --- a/t/t1004-read-tree-m-u-wf.sh +++ b/t/t1004-read-tree-m-u-wf.sh @@ -179,6 +179,8 @@ test_expect_success 'funny symlink in work tree' ' test_expect_success SANITY 'funny symlink in work tree, un-unlink-able' ' + test_when_finished "chmod u+w a 2>/dev/null; rm -fr a b" && + rm -fr a b && git reset --hard && @@ -188,10 +190,6 @@ test_expect_success SANITY 'funny symlink in work tree, un-unlink-able' ' ' -# clean-up from the above test -chmod a+w a 2>/dev/null -rm -fr a b - test_expect_success 'D/F setup' ' git reset --hard && diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index b19f332694..13dd510b2e 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -236,8 +236,8 @@ test_expect_success "--batch-check for an empty line" ' ' test_expect_success 'empty --batch-check notices missing object' ' - echo "$_z40 missing" >expect && - echo "$_z40" | git cat-file --batch-check="" >actual && + echo "$ZERO_OID missing" >expect && + echo "$ZERO_OID" | git cat-file --batch-check="" >actual && test_cmp expect actual ' @@ -282,7 +282,7 @@ test_expect_success "--batch-check with multiple sha1s gives correct format" ' ' test_expect_success 'setup blobs which are likely to delta' ' - test-genrandom foo 10240 >foo && + test-tool genrandom foo 10240 >foo && { cat foo; echo plus; } >foo-plus && git add foo foo-plus && git commit -m foo && @@ -294,8 +294,8 @@ test_expect_success 'setup blobs which are likely to delta' ' test_expect_success 'confirm that neither loose blob is a delta' ' cat >expect <<-EOF && - $_z40 - $_z40 + $ZERO_OID + $ZERO_OID EOF git cat-file --batch-check="%(deltabase)" <blobs >actual && test_cmp expect actual diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh index 532682f51c..a37753047e 100755 --- a/t/t1007-hash-object.sh +++ b/t/t1007-hash-object.sh @@ -9,13 +9,13 @@ echo_without_newline() { } test_blob_does_not_exist() { - test_expect_success 'blob does not exist in database' " + test_expect_success SHA1 'blob does not exist in database' " test_must_fail git cat-file blob $1 " } test_blob_exists() { - test_expect_success 'blob exists in database' " + test_expect_success SHA1 'blob exists in database' " git cat-file blob $1 " } @@ -73,19 +73,19 @@ test_expect_success "Can't use --path with --no-filters" ' push_repo -test_expect_success 'hash a file' ' +test_expect_success SHA1 'hash a file' ' test $hello_sha1 = $(git hash-object hello) ' test_blob_does_not_exist $hello_sha1 -test_expect_success 'hash from stdin' ' +test_expect_success SHA1 'hash from stdin' ' test $example_sha1 = $(git hash-object --stdin < example) ' test_blob_does_not_exist $example_sha1 -test_expect_success 'hash a file and write to database' ' +test_expect_success SHA1 'hash a file and write to database' ' test $hello_sha1 = $(git hash-object -w hello) ' @@ -161,7 +161,7 @@ pop_repo for args in "-w --stdin" "--stdin -w"; do push_repo - test_expect_success "hash from stdin and write to database ($args)" ' + test_expect_success SHA1 "hash from stdin and write to database ($args)" ' test $example_sha1 = $(git hash-object $args < example) ' @@ -176,14 +176,14 @@ example" sha1s="$hello_sha1 $example_sha1" -test_expect_success "hash two files with names on stdin" ' +test_expect_success SHA1 "hash two files with names on stdin" ' test "$sha1s" = "$(echo_without_newline "$filenames" | git hash-object --stdin-paths)" ' for args in "-w --stdin-paths" "--stdin-paths -w"; do push_repo - test_expect_success "hash two files with names on stdin and write to database ($args)" ' + test_expect_success SHA1 "hash two files with names on stdin and write to database ($args)" ' test "$sha1s" = "$(echo_without_newline "$filenames" | git hash-object $args)" ' diff --git a/t/t1011-read-tree-sparse-checkout.sh b/t/t1011-read-tree-sparse-checkout.sh index c167f606ca..0c6f48f302 100755 --- a/t/t1011-read-tree-sparse-checkout.sh +++ b/t/t1011-read-tree-sparse-checkout.sh @@ -15,8 +15,11 @@ test_description='sparse checkout tests . "$TEST_DIRECTORY"/lib-read-tree.sh test_expect_success 'setup' ' + test_commit init && + echo modified >>init.t && + cat >expected <<-EOF && - 100644 77f0ba1734ed79d12881f81b36ee134de6a3327b 0 init.t + 100644 $(git hash-object init.t) 0 init.t 100644 $EMPTY_BLOB 0 sub/added 100644 $EMPTY_BLOB 0 sub/addedtoo 100644 $EMPTY_BLOB 0 subsub/added @@ -28,8 +31,6 @@ test_expect_success 'setup' ' H subsub/added EOF - test_commit init && - echo modified >>init.t && mkdir sub subsub && touch sub/added sub/addedtoo subsub/added && git add init.t sub/added sub/addedtoo subsub/added && diff --git a/t/t1012-read-tree-df.sh b/t/t1012-read-tree-df.sh index a6a04b6b90..57f0770df1 100755 --- a/t/t1012-read-tree-df.sh +++ b/t/t1012-read-tree-df.sh @@ -32,7 +32,7 @@ settree () { checkindex () { git ls-files -s | - sed "s|^[0-7][0-7]* $_x40 \([0-3]\) |\1 |" >current && + sed "s|^[0-7][0-7]* $OID_REGEX \([0-3]\) |\1 |" >current && cat >expect && test_cmp expect current } diff --git a/t/t1050-large.sh b/t/t1050-large.sh index 6fd264cff0..f9eb143f43 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -103,9 +103,9 @@ test_expect_success 'packsize limit' ' # mid1 and mid2 will fit within 256k limit but # appending mid3 will bust the limit and will # result in a separate packfile. - test-genrandom "a" $(( 66 * 1024 )) >mid1 && - test-genrandom "b" $(( 80 * 1024 )) >mid2 && - test-genrandom "c" $(( 128 * 1024 )) >mid3 && + test-tool genrandom "a" $(( 66 * 1024 )) >mid1 && + test-tool genrandom "b" $(( 80 * 1024 )) >mid2 && + test-tool genrandom "c" $(( 128 * 1024 )) >mid3 && git add mid1 mid2 mid3 && count=0 diff --git a/t/t1300-repo-config.sh b/t/t1300-config.sh index cbeb9bebee..03c223708e 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-config.sh @@ -108,6 +108,7 @@ bar = foo [beta] baz = multiple \ lines +foo = bar EOF test_expect_success 'unset with cont. lines' ' @@ -118,6 +119,7 @@ cat > expect <<\EOF [alpha] bar = foo [beta] +foo = bar EOF test_expect_success 'unset with cont. lines is correct' 'test_cmp expect .git/config' @@ -740,7 +742,7 @@ test_expect_success bool ' do git config --bool --get bool.true$i >>result git config --bool --get bool.false$i >>result - done && + done && test_cmp expect result' test_expect_success 'invalid bool (--get)' ' @@ -914,7 +916,7 @@ test_expect_success 'get --expiry-date' ' invalid1 = "abc" EOF cat >expect <<-EOF && - $(test-date timestamp $rel) + $(test-tool date timestamp $rel) 1275666415 1510441871 1510348087 @@ -931,6 +933,36 @@ test_expect_success 'get --expiry-date' ' test_must_fail git config --expiry-date date.invalid1 ' +test_expect_success 'get --type=color' ' + rm .git/config && + git config foo.color "red" && + git config --get --type=color foo.color >actual.raw && + test_decode_color <actual.raw >actual && + echo "<RED>" >expect && + test_cmp expect actual +' + +cat >expect << EOF +[foo] + color = red +EOF + +test_expect_success 'set --type=color' ' + rm .git/config && + git config --type=color foo.color "red" && + test_cmp expect .git/config +' + +test_expect_success 'get --type=color barfs on non-color' ' + echo "[foo]bar=not-a-color" >.git/config && + test_must_fail git config --get --type=color foo.bar +' + +test_expect_success 'set --type=color barfs on non-color' ' + test_must_fail git config --type=color foo.color "not-a-color" 2>error && + test_i18ngrep "cannot parse color" error +' + cat > expect << EOF [quote] leading = " test" @@ -1206,6 +1238,29 @@ test_expect_success 'git -c is not confused by empty environment' ' GIT_CONFIG_PARAMETERS="" git -c x.one=1 config --list ' +sq="'" +test_expect_success 'detect bogus GIT_CONFIG_PARAMETERS' ' + cat >expect <<-\EOF && + env.one one + env.two two + EOF + GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq} ${sq}env.two=two${sq}" \ + git config --get-regexp "env.*" >actual && + test_cmp expect actual && + + cat >expect <<-EOF && + env.one one${sq} + env.two two + EOF + GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq$sq$sq ${sq}env.two=two${sq}" \ + git config --get-regexp "env.*" >actual && + test_cmp expect actual && + + test_must_fail env \ + GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq ${sq}env.two=two${sq}" \ + git config --get-regexp "env.*" +' + test_expect_success 'git config --edit works' ' git config -f tmp test.value no && echo test.value=yes >expect && @@ -1388,7 +1443,7 @@ test_expect_success 'urlmatch with wildcard' ' ' # good section hygiene -test_expect_failure 'unsetting the last key in a section removes header' ' +test_expect_success '--unset last key removes section (except if commented)' ' cat >.git/config <<-\EOF && # some generic comment on the configuration file itself # a comment specific to this "section" section. @@ -1402,13 +1457,86 @@ test_expect_failure 'unsetting the last key in a section removes header' ' cat >expect <<-\EOF && # some generic comment on the configuration file itself + # a comment specific to this "section" section. + [section] + # some intervening lines + # that should also be dropped + + # please be careful when you update the above variable EOF git config --unset section.key && - test_cmp expect .git/config + test_cmp expect .git/config && + + cat >.git/config <<-\EOF && + [section] + key = value + [next-section] + EOF + + cat >expect <<-\EOF && + [next-section] + EOF + + git config --unset section.key && + test_cmp expect .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = "multiline \ + QQ# with comment" + [two] + key = true + EOF + git config --unset two.key && + ! grep two .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = "multiline \ + QQ# with comment" + [one] + key = true + EOF + git config --unset-all one.key && + test_line_count = 0 .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = true + Q# a comment not at the start + [two] + Qkey = true + EOF + git config --unset two.key && + grep two .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = not [two "subsection"] + [two "subsection"] + [two "subsection"] + Qkey = true + [TWO "subsection"] + [one] + EOF + git config --unset two.subsection.key && + test "not [two subsection]" = "$(git config one.key)" && + test_line_count = 3 .git/config ' -test_expect_failure 'adding a key into an empty section reuses header' ' +test_expect_success '--unset-all removes section if empty & uncommented' ' + cat >.git/config <<-\EOF && + [section] + key = value1 + key = value2 + EOF + + git config --unset-all section.key && + test_line_count = 0 .git/config +' + +test_expect_success 'adding a key into an empty section reuses header' ' cat >.git/config <<-\EOF && [section] EOF @@ -1564,10 +1692,10 @@ test_expect_success '--show-origin stdin with file include' ' ' test_expect_success !MINGW '--show-origin blob' ' - cat >expect <<-\EOF && - blob:a9d9f9e555b5c6f07cbe09d3f06fe3df11e09c08 user.custom=true - EOF blob=$(git hash-object -w "$CUSTOM_CONFIG_FILE") && + cat >expect <<-EOF && + blob:$blob user.custom=true + EOF git config --blob=$blob --show-origin --list >output && test_cmp expect output ' @@ -1588,4 +1716,88 @@ test_expect_success '--local requires a repo' ' test_expect_code 128 nongit git config --local foo.bar ' +cat >.git/config <<-\EOF && +[core] +foo = true +number = 10 +big = 1M +EOF + +test_expect_success 'identical modern --type specifiers are allowed' ' + git config --type=int --type=int core.big >actual && + echo 1048576 >expect && + test_cmp expect actual +' + +test_expect_success 'identical legacy --type specifiers are allowed' ' + git config --int --int core.big >actual && + echo 1048576 >expect && + test_cmp expect actual +' + +test_expect_success 'identical mixed --type specifiers are allowed' ' + git config --int --type=int core.big >actual && + echo 1048576 >expect && + test_cmp expect actual +' + +test_expect_success 'non-identical modern --type specifiers are not allowed' ' + test_must_fail git config --type=int --type=bool core.big 2>error && + test_i18ngrep "only one type at a time" error +' + +test_expect_success 'non-identical legacy --type specifiers are not allowed' ' + test_must_fail git config --int --bool core.big 2>error && + test_i18ngrep "only one type at a time" error +' + +test_expect_success 'non-identical mixed --type specifiers are not allowed' ' + test_must_fail git config --type=int --bool core.big 2>error && + test_i18ngrep "only one type at a time" error +' + +test_expect_success '--type allows valid type specifiers' ' + echo "true" >expect && + git config --type=bool core.foo >actual && + test_cmp expect actual +' + +test_expect_success '--no-type unsets type specifiers' ' + echo "10" >expect && + git config --type=bool --no-type core.number >actual && + test_cmp expect actual +' + +test_expect_success 'unset type specifiers may be reset to conflicting ones' ' + echo 1048576 >expect && + git config --type=bool --no-type --type=int core.big >actual && + test_cmp expect actual +' + +test_expect_success '--type rejects unknown specifiers' ' + test_must_fail git config --type=nonsense core.foo 2>error && + test_i18ngrep "unrecognized --type argument" error +' + +test_expect_success '--replace-all does not invent newlines' ' + q_to_tab >.git/config <<-\EOF && + [abc]key + QkeepSection + [xyz] + Qkey = 1 + [abc] + Qkey = a + EOF + q_to_tab >expect <<-\EOF && + [abc] + QkeepSection + [xyz] + Qkey = 1 + [abc] + Qkey = b + EOF + git config --replace-all abc.key b && + test_cmp .git/config expect +' + test_done diff --git a/t/t1304-default-acl.sh b/t/t1304-default-acl.sh index f5422f1d33..335d3f3211 100755 --- a/t/t1304-default-acl.sh +++ b/t/t1304-default-acl.sh @@ -54,7 +54,7 @@ test_expect_success SETFACL 'Setup test repo' ' test_expect_success SETFACL 'Objects creation does not break ACLs with restrictive umask' ' # SHA1 for empty blob - check_perms_and_acl .git/objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391 + check_perms_and_acl .git/objects/$(echo $EMPTY_BLOB | sed -e "s,^\(..\),\1/,") ' test_expect_success SETFACL 'git gc does not break ACLs with restrictive umask' ' diff --git a/t/t1305-config-include.sh b/t/t1305-config-include.sh index d9d2f545a4..f035ee40a3 100755 --- a/t/t1305-config-include.sh +++ b/t/t1305-config-include.sh @@ -224,7 +224,7 @@ test_expect_success 'conditional include, early config reading' ' echo "[includeIf \"gitdir:foo/\"]path=bar6" >>.git/config && echo "[test]six=6" >.git/bar6 && echo 6 >expect && - test-config read_early_config test.six >actual && + test-tool config read_early_config test.six >actual && test_cmp expect actual ) ' diff --git a/t/t1307-config-blob.sh b/t/t1307-config-blob.sh index eed31ffa30..37dc689d8c 100755 --- a/t/t1307-config-blob.sh +++ b/t/t1307-config-blob.sh @@ -73,4 +73,8 @@ test_expect_success 'can parse blob ending with CR' ' test_cmp expect actual ' +test_expect_success 'config --blob outside of a repository is an error' ' + test_must_fail nongit git config --blob=foo --list +' + test_done diff --git a/t/t1308-config-set.sh b/t/t1308-config-set.sh index bafed5c9b8..3e00d1af01 100755 --- a/t/t1308-config-set.sh +++ b/t/t1308-config-set.sh @@ -18,7 +18,7 @@ check_config () { then printf "%s\n" "$@" fi >expect && - test_expect_code $expect_code test-config "$op" "$key" >actual && + test_expect_code $expect_code test-tool config "$op" "$key" >actual && test_cmp expect actual } @@ -125,7 +125,7 @@ test_expect_success 'find string value for a key' ' ' test_expect_success 'check line error when NULL string is queried' ' - test_expect_code 128 test-config get_string case.foo 2>result && + test_expect_code 128 test-tool config get_string case.foo 2>result && test_i18ngrep "fatal: .*case\.foo.*\.git/config.*line 7" result ' @@ -155,13 +155,13 @@ test_expect_success 'find value from a configset' ' baz = ball EOF echo silk >expect && - test-config configset_get_value my.new config2 .git/config >actual && + test-tool config configset_get_value my.new config2 .git/config >actual && test_cmp expect actual ' test_expect_success 'find value with highest priority from a configset' ' echo hask >expect && - test-config configset_get_value case.baz config2 .git/config >actual && + test-tool config configset_get_value case.baz config2 .git/config >actual && test_cmp expect actual ' @@ -173,20 +173,20 @@ test_expect_success 'find value_list for a key from a configset' ' lama ball EOF - test-config configset_get_value case.baz config2 .git/config >actual && + test-tool config configset_get_value case.baz config2 .git/config >actual && test_cmp expect actual ' test_expect_success 'proper error on non-existent files' ' echo "Error (-1) reading configuration file non-existent-file." >expect && - test_expect_code 2 test-config configset_get_value foo.bar non-existent-file 2>actual && + test_expect_code 2 test-tool config configset_get_value foo.bar non-existent-file 2>actual && test_cmp expect actual ' test_expect_success 'proper error on directory "files"' ' echo "Error (-1) reading configuration file a-directory." >expect && mkdir a-directory && - test_expect_code 2 test-config configset_get_value foo.bar a-directory 2>output && + test_expect_code 2 test-tool config configset_get_value foo.bar a-directory 2>output && grep "^warning:" output && grep "^Error" output >actual && test_cmp expect actual @@ -196,7 +196,7 @@ test_expect_success POSIXPERM,SANITY 'proper error on non-accessible files' ' chmod -r .git/config && test_when_finished "chmod +r .git/config" && echo "Error (-1) reading configuration file .git/config." >expect && - test_expect_code 2 test-config configset_get_value foo.bar .git/config 2>output && + test_expect_code 2 test-tool config configset_get_value foo.bar .git/config 2>output && grep "^warning:" output && grep "^Error" output >actual && test_cmp expect actual @@ -207,14 +207,14 @@ test_expect_success 'proper error on error in default config files' ' test_when_finished "mv .git/config.old .git/config" && echo "[" >>.git/config && echo "fatal: bad config line 34 in file .git/config" >expect && - test_expect_code 128 test-config get_value foo.bar 2>actual && + test_expect_code 128 test-tool config get_value foo.bar 2>actual && test_i18ncmp expect actual ' test_expect_success 'proper error on error in custom config files' ' echo "[" >>syntax-error && echo "fatal: bad config line 1 in file syntax-error" >expect && - test_expect_code 128 test-config configset_get_value foo.bar syntax-error 2>actual && + test_expect_code 128 test-tool config configset_get_value foo.bar syntax-error 2>actual && test_i18ncmp expect actual ' @@ -267,7 +267,7 @@ test_expect_success 'iteration shows correct origins' ' name= scope=cmdline EOF - GIT_CONFIG_PARAMETERS=$cmdline_config test-config iterate >actual && + GIT_CONFIG_PARAMETERS=$cmdline_config test-tool config iterate >actual && test_cmp expect actual ' diff --git a/t/t1309-early-config.sh b/t/t1309-early-config.sh index 3dda215e8e..413642aa56 100755 --- a/t/t1309-early-config.sh +++ b/t/t1309-early-config.sh @@ -6,7 +6,7 @@ test_description='Test read_early_config()' test_expect_success 'read early config' ' test_config early.config correct && - test-config read_early_config early.config >output && + test-tool config read_early_config early.config >output && test correct = "$(cat output)" ' @@ -15,7 +15,7 @@ test_expect_success 'in a sub-directory' ' mkdir -p sub && ( cd sub && - test-config read_early_config early.config + test-tool config read_early_config early.config ) >output && test sub = "$(cat output)" ' @@ -27,7 +27,7 @@ test_expect_success 'ceiling' ' GIT_CEILING_DIRECTORIES="$PWD" && export GIT_CEILING_DIRECTORIES && cd sub && - test-config read_early_config early.config + test-tool config read_early_config early.config ) >output && test -z "$(cat output)" ' @@ -42,7 +42,7 @@ test_expect_success 'ceiling #2' ' GIT_CEILING_DIRECTORIES="$PWD" && export GIT_CEILING_DIRECTORIES XDG_CONFIG_HOME && cd sub && - test-config read_early_config early.config + test-tool config read_early_config early.config ) >output && test xdg = "$(cat output)" ' @@ -54,7 +54,7 @@ test_expect_success 'read config file in right order' ' ( cd foo && echo "[test]source = repo" >>.git/config && - GIT_CONFIG_PARAMETERS=$cmdline_config test-config \ + GIT_CONFIG_PARAMETERS=$cmdline_config test-tool config \ read_early_config test.source >actual && cat >expected <<-\EOF && home @@ -71,7 +71,7 @@ test_with_config () { ( cd throwaway && echo "$*" >.git/config && - test-config read_early_config early.config + test-tool config read_early_config early.config ) } diff --git a/t/t1310-config-default.sh b/t/t1310-config-default.sh new file mode 100755 index 0000000000..6049d91708 --- /dev/null +++ b/t/t1310-config-default.sh @@ -0,0 +1,36 @@ +#!/bin/sh + +test_description='Test git config in different settings (with --default)' + +. ./test-lib.sh + +test_expect_success 'uses --default when entry missing' ' + echo quux >expect && + git config -f config --default=quux core.foo >actual && + test_cmp expect actual +' + +test_expect_success 'does not use --default when entry present' ' + echo bar >expect && + git -c core.foo=bar config --default=baz core.foo >actual && + test_cmp expect actual +' + +test_expect_success 'canonicalizes --default with appropriate type' ' + echo true >expect && + git config -f config --default=yes --bool core.foo >actual && + test_cmp expect actual +' + +test_expect_success 'dies when --default cannot be parsed' ' + test_must_fail git config -f config --type=expiry-date --default=x --get \ + not.a.section 2>error && + test_i18ngrep "failed to format default config value" error +' + +test_expect_success 'does not allow --default without --get' ' + test_must_fail git config --default=quux --unset a.section >output 2>&1 && + test_i18ngrep "\-\-default is only applicable to" output +' + +test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index 664a3a4e4e..e1fd0f0ca8 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -6,7 +6,7 @@ test_description='Test git update-ref and basic ref logging' . ./test-lib.sh -Z=$_z40 +Z=$ZERO_OID m=refs/heads/master n_dir=refs/heads/gu @@ -457,6 +457,66 @@ test_expect_success 'git cat-file blob master@{2005-05-26 23:42}:F (expect OTHER test OTHER = $(git cat-file blob "master@{2005-05-26 23:42}:F") ' +# Test adding and deleting pseudorefs + +test_expect_success 'given old value for missing pseudoref, do not create' ' + test_must_fail git update-ref PSEUDOREF $A $B 2>err && + test_path_is_missing .git/PSEUDOREF && + grep "could not read ref" err +' + +test_expect_success 'create pseudoref' ' + git update-ref PSEUDOREF $A && + test $A = $(cat .git/PSEUDOREF) +' + +test_expect_success 'overwrite pseudoref with no old value given' ' + git update-ref PSEUDOREF $B && + test $B = $(cat .git/PSEUDOREF) +' + +test_expect_success 'overwrite pseudoref with correct old value' ' + git update-ref PSEUDOREF $C $B && + test $C = $(cat .git/PSEUDOREF) +' + +test_expect_success 'do not overwrite pseudoref with wrong old value' ' + test_must_fail git update-ref PSEUDOREF $D $E 2>err && + test $C = $(cat .git/PSEUDOREF) && + grep "unexpected object ID" err +' + +test_expect_success 'delete pseudoref' ' + git update-ref -d PSEUDOREF && + test_path_is_missing .git/PSEUDOREF +' + +test_expect_success 'do not delete pseudoref with wrong old value' ' + git update-ref PSEUDOREF $A && + test_must_fail git update-ref -d PSEUDOREF $B 2>err && + test $A = $(cat .git/PSEUDOREF) && + grep "unexpected object ID" err +' + +test_expect_success 'delete pseudoref with correct old value' ' + git update-ref -d PSEUDOREF $A && + test_path_is_missing .git/PSEUDOREF +' + +test_expect_success 'create pseudoref with old OID zero' ' + git update-ref PSEUDOREF $A $Z && + test $A = $(cat .git/PSEUDOREF) +' + +test_expect_success 'do not overwrite pseudoref with old OID zero' ' + test_when_finished git update-ref -d PSEUDOREF && + test_must_fail git update-ref PSEUDOREF $B $Z 2>err && + test $A = $(cat .git/PSEUDOREF) && + grep "already exists" err +' + +# Test --stdin + a=refs/heads/a b=refs/heads/b c=refs/heads/c diff --git a/t/t1401-symbolic-ref.sh b/t/t1401-symbolic-ref.sh index 9e782a8122..a4ebb0b65f 100755 --- a/t/t1401-symbolic-ref.sh +++ b/t/t1401-symbolic-ref.sh @@ -65,7 +65,7 @@ reset_to_sane test_expect_success 'symbolic-ref fails to delete real ref' ' echo "fatal: Cannot delete refs/heads/foo, not a symbolic ref" >expect && test_must_fail git symbolic-ref -d refs/heads/foo >actual 2>&1 && - test_path_is_file .git/refs/heads/foo && + git rev-parse --verify refs/heads/foo && test_cmp expect actual ' reset_to_sane diff --git a/t/t1405-main-ref-store.sh b/t/t1405-main-ref-store.sh index e8115df5ba..a74c38b5fb 100755 --- a/t/t1405-main-ref-store.sh +++ b/t/t1405-main-ref-store.sh @@ -4,7 +4,7 @@ test_description='test main ref store api' . ./test-lib.sh -RUN="test-ref-store main" +RUN="test-tool ref-store main" test_expect_success 'pack_refs(PACK_REFS_ALL | PACK_REFS_PRUNE)' ' test_commit one && @@ -45,7 +45,7 @@ test_expect_success 'rename_refs(master, new-master)' ' ' test_expect_success 'for_each_ref(refs/heads/)' ' - $RUN for-each-ref refs/heads/ | cut -c 42- >actual && + $RUN for-each-ref refs/heads/ | cut -d" " -f 2- >actual && cat >expected <<-\EOF && master 0x0 new-master 0x0 @@ -71,7 +71,7 @@ test_expect_success 'verify_ref(new-master)' ' ' test_expect_success 'for_each_reflog()' ' - $RUN for-each-reflog | sort | cut -c 42- >actual && + $RUN for-each-reflog | sort -k2 | cut -c 42- >actual && cat >expected <<-\EOF && HEAD 0x1 refs/heads/master 0x0 diff --git a/t/t1406-submodule-ref-store.sh b/t/t1406-submodule-ref-store.sh index c32d4cc465..e093782cc3 100755 --- a/t/t1406-submodule-ref-store.sh +++ b/t/t1406-submodule-ref-store.sh @@ -4,7 +4,7 @@ test_description='test submodule ref store api' . ./test-lib.sh -RUN="test-ref-store submodule:sub" +RUN="test-tool ref-store submodule:sub" test_expect_success 'setup' ' git init sub && diff --git a/t/t1407-worktree-ref-store.sh b/t/t1407-worktree-ref-store.sh index 8842d0329f..4623ae15c4 100755 --- a/t/t1407-worktree-ref-store.sh +++ b/t/t1407-worktree-ref-store.sh @@ -4,8 +4,8 @@ test_description='test worktree ref store api' . ./test-lib.sh -RWT="test-ref-store worktree:wt" -RMAIN="test-ref-store worktree:main" +RWT="test-tool ref-store worktree:wt" +RMAIN="test-tool ref-store worktree:main" test_expect_success 'setup' ' test_commit first && @@ -50,13 +50,13 @@ test_expect_success 'create_symref(FOO, refs/heads/master)' ' ' test_expect_success 'for_each_reflog()' ' - echo $_z40 > .git/logs/PSEUDO-MAIN && + echo $ZERO_OID > .git/logs/PSEUDO-MAIN && mkdir -p .git/logs/refs/bisect && - echo $_z40 > .git/logs/refs/bisect/random && + echo $ZERO_OID > .git/logs/refs/bisect/random && - echo $_z40 > .git/worktrees/wt/logs/PSEUDO-WT && + echo $ZERO_OID > .git/worktrees/wt/logs/PSEUDO-WT && mkdir -p .git/worktrees/wt/logs/refs/bisect && - echo $_z40 > .git/worktrees/wt/logs/refs/bisect/wt-random && + echo $ZERO_OID > .git/worktrees/wt/logs/refs/bisect/wt-random && $RWT for-each-reflog | cut -c 42- | sort >actual && cat >expected <<-\EOF && diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 553e26d9ce..8293131001 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -339,8 +339,8 @@ test_expect_failure 'reflog with non-commit entries displays all entries' ' ' test_expect_success 'reflog expire operates on symref not referrent' ' - git branch -l the_symref && - git branch -l referrent && + git branch --create-reflog the_symref && + git branch --create-reflog referrent && git update-ref referrent HEAD && git symbolic-ref refs/heads/the_symref refs/heads/referrent && test_when_finished "rm -f .git/refs/heads/referrent.lock" && diff --git a/t/t1411-reflog-show.sh b/t/t1411-reflog-show.sh index 6ac7734d79..596907758d 100755 --- a/t/t1411-reflog-show.sh +++ b/t/t1411-reflog-show.sh @@ -10,6 +10,7 @@ test_expect_success 'setup' ' git commit -m one ' +commit=$(git rev-parse --short HEAD) cat >expect <<'EOF' Reflog: HEAD@{0} (C O Mitter <committer@example.com>) Reflog message: commit (initial): one @@ -20,8 +21,8 @@ test_expect_success 'log -g shows reflog headers' ' test_cmp expect actual ' -cat >expect <<'EOF' -e46513e HEAD@{0}: commit (initial): one +cat >expect <<EOF +$commit HEAD@{0}: commit (initial): one EOF test_expect_success 'oneline reflog format' ' git log -g -1 --oneline >actual && @@ -33,8 +34,8 @@ test_expect_success 'reflog default format' ' test_cmp expect actual ' -cat >expect <<'EOF' -commit e46513e +cat >expect <<EOF +commit $commit Reflog: HEAD@{0} (C O Mitter <committer@example.com>) Reflog message: commit (initial): one Author: A U Thor <author@example.com> @@ -56,8 +57,8 @@ test_expect_success 'using @{now} syntax shows reflog date (multiline)' ' test_cmp expect actual ' -cat >expect <<'EOF' -e46513e HEAD@{Thu Apr 7 15:13:13 2005 -0700}: commit (initial): one +cat >expect <<EOF +$commit HEAD@{Thu Apr 7 15:13:13 2005 -0700}: commit (initial): one EOF test_expect_success 'using @{now} syntax shows reflog date (oneline)' ' git log -g -1 --oneline HEAD@{now} >actual && @@ -82,8 +83,8 @@ test_expect_success 'using --date= shows reflog date (multiline)' ' test_cmp expect actual ' -cat >expect <<'EOF' -e46513e HEAD@{Thu Apr 7 15:13:13 2005 -0700}: commit (initial): one +cat >expect <<EOF +$commit HEAD@{Thu Apr 7 15:13:13 2005 -0700}: commit (initial): one EOF test_expect_success 'using --date= shows reflog date (oneline)' ' git log -g -1 --oneline --date=default >actual && @@ -109,8 +110,8 @@ test_expect_success 'log.date does not invoke "--date" magic (multiline)' ' test_cmp expect actual ' -cat >expect <<'EOF' -e46513e HEAD@{0}: commit (initial): one +cat >expect <<EOF +$commit HEAD@{0}: commit (initial): one EOF test_expect_success 'log.date does not invoke "--date" magic (oneline)' ' test_config log.date raw && diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index cb4b66e29d..91fd71444d 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -713,7 +713,7 @@ test_expect_success 'fsck notices dangling objects' ' test_expect_success 'fsck $name notices bogus $name' ' test_must_fail git fsck bogus && - test_must_fail git fsck $_z40 + test_must_fail git fsck $ZERO_OID ' test_expect_success 'bogus head does not fallback to all heads' ' @@ -723,7 +723,7 @@ test_expect_success 'bogus head does not fallback to all heads' ' blob=$(git rev-parse :foo) && test_when_finished "git rm --cached foo" && remove_object $blob && - test_must_fail git fsck $_z40 >out 2>&1 && + test_must_fail git fsck $ZERO_OID >out 2>&1 && ! grep $blob out ' diff --git a/t/t1501-work-tree.sh b/t/t1501-work-tree.sh index b06210ec5e..afcdfafe45 100755 --- a/t/t1501-work-tree.sh +++ b/t/t1501-work-tree.sh @@ -238,10 +238,10 @@ test_expect_success '_gently() groks relative GIT_DIR & GIT_WORK_TREE' ' test_expect_success 'diff-index respects work tree under .git dir' ' cat >diff-index-cached.expected <<-EOF && - :000000 100644 $_z40 $EMPTY_BLOB A sub/dir/tracked + :000000 100644 $ZERO_OID $EMPTY_BLOB A sub/dir/tracked EOF cat >diff-index.expected <<-EOF && - :000000 100644 $_z40 $_z40 A sub/dir/tracked + :000000 100644 $ZERO_OID $ZERO_OID A sub/dir/tracked EOF ( @@ -257,7 +257,7 @@ test_expect_success 'diff-index respects work tree under .git dir' ' test_expect_success 'diff-files respects work tree under .git dir' ' cat >diff-files.expected <<-EOF && - :100644 100644 $EMPTY_BLOB $_z40 M sub/dir/tracked + :100644 100644 $EMPTY_BLOB $ZERO_OID M sub/dir/tracked EOF ( @@ -341,7 +341,7 @@ test_expect_success 'make_relative_path handles double slashes in GIT_DIR' ' test_expect_success 'relative $GIT_WORK_TREE and git subprocesses' ' GIT_DIR=repo.git GIT_WORK_TREE=repo.git/work \ - test-subprocess --setup-work-tree rev-parse --show-toplevel >actual && + test-tool subprocess --setup-work-tree rev-parse --show-toplevel >actual && echo "$(pwd)/repo.git/work" >expected && test_cmp expected actual ' @@ -360,7 +360,7 @@ test_expect_success 'GIT_DIR set (1)' ' ( cd work && GIT_DIR=../gitfile git rev-parse --git-common-dir >actual && - test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test-tool path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && test_cmp expect actual ) ' @@ -371,7 +371,7 @@ test_expect_success 'GIT_DIR set (2)' ' ( cd work && GIT_DIR=../gitfile git rev-parse --git-common-dir >actual && - test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test-tool path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && test_cmp expect actual ) ' @@ -382,7 +382,7 @@ test_expect_success 'Auto discovery' ' ( cd work && git rev-parse --git-common-dir >actual && - test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test-tool path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && test_cmp expect actual && echo haha >data1 && git add data1 && @@ -400,7 +400,7 @@ test_expect_success '$GIT_DIR/common overrides core.worktree' ' ( cd work && git rev-parse --git-common-dir >actual && - test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test-tool path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && test_cmp expect actual && echo haha >data2 && git add data2 && @@ -431,4 +431,16 @@ test_expect_success 'error out gracefully on invalid $GIT_WORK_TREE' ' ) ' +test_expect_success 'refs work with relative gitdir and work tree' ' + git init relative && + git -C relative commit --allow-empty -m one && + git -C relative commit --allow-empty -m two && + + GIT_DIR=relative/.git GIT_WORK_TREE=relative git reset HEAD^ && + + git -C relative log -1 --format=%s >actual && + echo one >expect && + test_cmp expect actual +' + test_done diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 79a0251efa..4ee009da66 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -157,7 +157,7 @@ test_expect_success 'relative path not found' ' test_expect_success 'relative path outside worktree' ' test_must_fail git rev-parse HEAD:../file.txt >output 2>error && test -z "$(cat output)" && - grep "outside repository" error + test_i18ngrep "outside repository" error ' test_expect_success 'relative path when cwd is outside worktree' ' diff --git a/t/t1507-rev-parse-upstream.sh b/t/t1507-rev-parse-upstream.sh index b23c4e3fab..93c77eac45 100755 --- a/t/t1507-rev-parse-upstream.sh +++ b/t/t1507-rev-parse-upstream.sh @@ -42,7 +42,7 @@ commit_subject () { error_message () { (cd clone && - test_must_fail git rev-parse --verify "$@") + test_must_fail git rev-parse --verify "$@" 2>../error) } test_expect_success '@{upstream} resolves to correct full name' ' @@ -159,8 +159,8 @@ test_expect_success 'branch@{u} error message when no upstream' ' cat >expect <<-EOF && fatal: no upstream configured for branch ${sq}non-tracking${sq} EOF - error_message non-tracking@{u} 2>actual && - test_i18ncmp expect actual + error_message non-tracking@{u} && + test_i18ncmp expect error ' test_expect_success '@{u} error message when no upstream' ' @@ -175,8 +175,8 @@ test_expect_success 'branch@{u} error message with misspelt branch' ' cat >expect <<-EOF && fatal: no such branch: ${sq}no-such-branch${sq} EOF - error_message no-such-branch@{u} 2>actual && - test_i18ncmp expect actual + error_message no-such-branch@{u} && + test_i18ncmp expect error ' test_expect_success '@{u} error message when not on a branch' ' @@ -192,8 +192,8 @@ test_expect_success 'branch@{u} error message if upstream branch not fetched' ' cat >expect <<-EOF && fatal: upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch EOF - error_message bad-upstream@{u} 2>actual && - test_i18ncmp expect actual + error_message bad-upstream@{u} && + test_i18ncmp expect error ' test_expect_success 'pull works when tracking a local branch' ' @@ -209,8 +209,9 @@ test_expect_success '@{u} works when tracking a local branch' ' test refs/heads/master = "$(full_name @{u})" ' +commit=$(git rev-parse HEAD) cat >expect <<EOF -commit 8f489d01d0cc65c3b0f09504ec50b5ed02a70bd5 +commit $commit Reflog: master@{0} (C O Mitter <committer@example.com>) Reflog message: branch: Created from HEAD Author: A U Thor <author@example.com> @@ -224,7 +225,7 @@ test_expect_success 'log -g other@{u}' ' ' cat >expect <<EOF -commit 8f489d01d0cc65c3b0f09504ec50b5ed02a70bd5 +commit $commit Reflog: master@{Thu Apr 7 15:17:13 2005 -0700} (C O Mitter <committer@example.com>) Reflog message: branch: Created from HEAD Author: A U Thor <author@example.com> diff --git a/t/t1510-repo-setup.sh b/t/t1510-repo-setup.sh index 13ae12dfa7..972bd9c785 100755 --- a/t/t1510-repo-setup.sh +++ b/t/t1510-repo-setup.sh @@ -39,6 +39,10 @@ A few rules for repo setup: 11. When user's cwd is outside worktree, cwd remains unchanged, prefix is NULL. " + +# This test heavily relies on the standard error of nested function calls. +test_untraceable=UnfortunatelyYes + . ./test-lib.sh here=$(pwd) @@ -234,7 +238,6 @@ test_expect_success '#0: nonbare repo, no explicit configuration' ' ' test_expect_success '#1: GIT_WORK_TREE without explicit GIT_DIR is accepted' ' - mkdir -p wt && try_repo 1 "$here" unset unset "" unset \ "$here/1/.git" "$here" "$here" 1/ \ "$here/1/.git" "$here" "$here" 1/sub/ 2>message && diff --git a/t/t1512-rev-parse-disambiguation.sh b/t/t1512-rev-parse-disambiguation.sh index 711704ba5a..96fe3754c8 100755 --- a/t/t1512-rev-parse-disambiguation.sh +++ b/t/t1512-rev-parse-disambiguation.sh @@ -22,6 +22,12 @@ one tagged as v1.0.0. They all have one regular file each. . ./test-lib.sh +if ! test_have_prereq SHA1 +then + skip_all='not using SHA-1 for objects' + test_done +fi + test_expect_success 'blob and tree' ' test_tick && ( @@ -361,4 +367,25 @@ test_expect_success 'core.disambiguate does not override context' ' git -c core.disambiguate=committish rev-parse $sha1^{tree} ' +test_expect_success C_LOCALE_OUTPUT 'ambiguous commits are printed by type first, then hash order' ' + test_must_fail git rev-parse 0000 2>stderr && + grep ^hint: stderr >hints && + grep 0000 hints >objects && + cat >expected <<-\EOF && + tag + commit + tree + blob + EOF + awk "{print \$3}" <objects >objects.types && + uniq <objects.types >objects.types.uniq && + test_cmp expected objects.types.uniq && + for type in tag commit tree blob + do + grep $type objects >$type.objects && + sort $type.objects >$type.objects.sorted && + test_cmp $type.objects.sorted $type.objects + done +' + test_done diff --git a/t/t1600-index.sh b/t/t1600-index.sh index 079d241145..c4422312f4 100755 --- a/t/t1600-index.sh +++ b/t/t1600-index.sh @@ -68,7 +68,7 @@ test_expect_success 'GIT_INDEX_VERSION takes precedence over config' ' git config --add index.version 2 && git add a 2>&1 && echo 4 >expect && - test-index-version <.git/index >actual && + test-tool index-version <.git/index >actual && test_cmp expect actual ) ' diff --git a/t/t1601-index-bogus.sh b/t/t1601-index-bogus.sh index 73cc9323cd..4171f1e141 100755 --- a/t/t1601-index-bogus.sh +++ b/t/t1601-index-bogus.sh @@ -4,7 +4,7 @@ test_description='test handling of bogus index entries' . ./test-lib.sh test_expect_success 'create tree with null sha1' ' - tree=$(printf "160000 commit $_z40\\tbroken\\n" | git mktree) + tree=$(printf "160000 commit $ZERO_OID\\tbroken\\n" | git mktree) ' test_expect_success 'read-tree refuses to read null sha1' ' diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index a66936fe9b..1e81b33b2e 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -11,8 +11,8 @@ sane_unset GIT_FSMONITOR_TEST test_expect_success 'enable split index' ' git config splitIndex.maxPercentChange 100 && git update-index --split-index && - test-dump-split-index .git/index >actual && - indexversion=$(test-index-version <.git/index) && + test-tool dump-split-index .git/index >actual && + indexversion=$(test-tool index-version <.git/index) && if test "$indexversion" = "4" then own=432ef4b63f32193984f339431fd50ca796493569 @@ -39,7 +39,7 @@ test_expect_success 'add one file' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && base $base 100644 $EMPTY_BLOB 0 one @@ -57,8 +57,8 @@ test_expect_success 'disable split index' ' EOF test_cmp ls-files.expect ls-files.actual && - BASE=$(test-dump-split-index .git/index | grep "^own" | sed "s/own/base/") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^own" | sed "s/own/base/") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && not a split index EOF @@ -73,7 +73,7 @@ test_expect_success 'enable split index again, "one" now belongs to base index"' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -91,7 +91,7 @@ test_expect_success 'modify original file, base index untouched' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q @@ -111,7 +111,7 @@ test_expect_success 'add another file, which stays index' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q @@ -130,7 +130,7 @@ test_expect_success 'remove file not in base index' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q @@ -147,7 +147,7 @@ test_expect_success 'remove file in base index' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -165,7 +165,7 @@ test_expect_success 'add original file back' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE 100644 $EMPTY_BLOB 0 one @@ -195,7 +195,7 @@ test_expect_success 'unify index, two files remain' ' EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && not a split index EOF @@ -229,8 +229,8 @@ test_expect_success 'set core.splitIndex config variable to true' ' 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two EOF test_cmp ls-files.expect ls-files.actual && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -248,7 +248,7 @@ test_expect_success 'set core.splitIndex config variable to false' ' 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two EOF test_cmp ls-files.expect ls-files.actual && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && not a split index EOF @@ -259,8 +259,8 @@ test_expect_success 'set core.splitIndex config variable to true' ' git config core.splitIndex true && : >three && git update-index --add three && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -269,7 +269,7 @@ test_expect_success 'set core.splitIndex config variable to true' ' test_cmp expect actual && : >four && git update-index --add four && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 four @@ -283,8 +283,8 @@ test_expect_success 'check behavior with splitIndex.maxPercentChange unset' ' git config --unset splitIndex.maxPercentChange && : >five && git update-index --add five && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -293,7 +293,7 @@ test_expect_success 'check behavior with splitIndex.maxPercentChange unset' ' test_cmp expect actual && : >six && git update-index --add six && - test-dump-split-index .git/index | sed "/^own/d" >actual && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 six @@ -307,8 +307,8 @@ test_expect_success 'check splitIndex.maxPercentChange set to 0' ' git config splitIndex.maxPercentChange 0 && : >seven && git update-index --add seven && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -317,8 +317,8 @@ test_expect_success 'check splitIndex.maxPercentChange set to 0' ' test_cmp expect actual && : >eight && git update-index --add eight && - BASE=$(test-dump-split-index .git/index | grep "^base") && - test-dump-split-index .git/index | sed "/^own/d" >actual && + BASE=$(test-tool dump-split-index .git/index | grep "^base") && + test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE replacements: @@ -332,12 +332,12 @@ test_expect_success 'shared index files expire after 2 weeks by default' ' git update-index --add ten && test $(ls .git/sharedindex.* | wc -l) -gt 2 && just_under_2_weeks_ago=$((5-14*86400)) && - test-chmtime =$just_under_2_weeks_ago .git/sharedindex.* && + test-tool chmtime =$just_under_2_weeks_ago .git/sharedindex.* && : >eleven && git update-index --add eleven && test $(ls .git/sharedindex.* | wc -l) -gt 2 && just_over_2_weeks_ago=$((-1-14*86400)) && - test-chmtime =$just_over_2_weeks_ago .git/sharedindex.* && + test-tool chmtime =$just_over_2_weeks_ago .git/sharedindex.* && : >twelve && git update-index --add twelve && test $(ls .git/sharedindex.* | wc -l) -le 2 @@ -345,12 +345,12 @@ test_expect_success 'shared index files expire after 2 weeks by default' ' test_expect_success 'check splitIndex.sharedIndexExpire set to 16 days' ' git config splitIndex.sharedIndexExpire "16.days.ago" && - test-chmtime =$just_over_2_weeks_ago .git/sharedindex.* && + test-tool chmtime =$just_over_2_weeks_ago .git/sharedindex.* && : >thirteen && git update-index --add thirteen && test $(ls .git/sharedindex.* | wc -l) -gt 2 && just_over_16_days_ago=$((-1-16*86400)) && - test-chmtime =$just_over_16_days_ago .git/sharedindex.* && + test-tool chmtime =$just_over_16_days_ago .git/sharedindex.* && : >fourteen && git update-index --add fourteen && test $(ls .git/sharedindex.* | wc -l) -le 2 @@ -359,13 +359,13 @@ test_expect_success 'check splitIndex.sharedIndexExpire set to 16 days' ' test_expect_success 'check splitIndex.sharedIndexExpire set to "never" and "now"' ' git config splitIndex.sharedIndexExpire never && just_10_years_ago=$((-365*10*86400)) && - test-chmtime =$just_10_years_ago .git/sharedindex.* && + test-tool chmtime =$just_10_years_ago .git/sharedindex.* && : >fifteen && git update-index --add fifteen && test $(ls .git/sharedindex.* | wc -l) -gt 2 && git config splitIndex.sharedIndexExpire now && just_1_second_ago=-1 && - test-chmtime =$just_1_second_ago .git/sharedindex.* && + test-tool chmtime =$just_1_second_ago .git/sharedindex.* && : >sixteen && git update-index --add sixteen && test $(ls .git/sharedindex.* | wc -l) -le 2 @@ -426,7 +426,7 @@ test_expect_success 'writing split index with null sha1 does not write cache tre git commit -m "commit" && { git ls-tree HEAD && - printf "160000 commit $_z40\\tbroken\\n" + printf "160000 commit $ZERO_OID\\tbroken\\n" } >broken-tree && echo "add broken entry" >msg && @@ -435,7 +435,7 @@ test_expect_success 'writing split index with null sha1 does not write cache tre commit=$(git commit-tree $tree -p HEAD <msg) && git update-ref HEAD "$commit" && GIT_ALLOW_NULL_SHA1=1 git reset --hard && - (test-dump-cache-tree >cache-tree.out || true) && + (test-tool dump-cache-tree >cache-tree.out || true) && test_line_count = 0 cache-tree.out ' diff --git a/t/t2011-checkout-invalid-head.sh b/t/t2011-checkout-invalid-head.sh index c5501b008c..0e8d56aa76 100755 --- a/t/t2011-checkout-invalid-head.sh +++ b/t/t2011-checkout-invalid-head.sh @@ -15,7 +15,7 @@ test_expect_success 'checkout should not start branch from a tree' ' ' test_expect_success 'checkout master from invalid HEAD' ' - echo $_z40 >.git/HEAD && + echo $ZERO_OID >.git/HEAD && git checkout master -- ' diff --git a/t/t2020-checkout-detach.sh b/t/t2020-checkout-detach.sh index bb4f2e0c63..1fa670625c 100755 --- a/t/t2020-checkout-detach.sh +++ b/t/t2020-checkout-detach.sh @@ -189,8 +189,12 @@ test_expect_success 'no advice given for explicit detached head state' ' # Detached HEAD tests for GIT_PRINT_SHA1_ELLIPSIS (new format) test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not asked to' " + commit=$(git rev-parse --short=12 master^) && + commit2=$(git rev-parse --short=12 master~2) && + commit3=$(git rev-parse --short=12 master~3) && + # The first detach operation is more chatty than the following ones. - cat >1st_detach <<-'EOF' && + cat >1st_detach <<-EOF && Note: checking out 'HEAD^'. You are in 'detached HEAD' state. You can look around, make experimental @@ -202,18 +206,18 @@ test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not as git checkout -b <new-branch-name> - HEAD is now at 7c7cd714e262 three + HEAD is now at \$commit three EOF # The remaining ones just show info about previous and current HEADs. - cat >2nd_detach <<-'EOF' && - Previous HEAD position was 7c7cd714e262 three - HEAD is now at 139b20d8e6c5 two + cat >2nd_detach <<-EOF && + Previous HEAD position was \$commit three + HEAD is now at \$commit2 two EOF - cat >3rd_detach <<-'EOF' && - Previous HEAD position was 139b20d8e6c5 two - HEAD is now at d79ce1670bdc one + cat >3rd_detach <<-EOF && + Previous HEAD position was \$commit2 two + HEAD is now at \$commit3 one EOF reset && @@ -261,8 +265,12 @@ test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not as # Detached HEAD tests for GIT_PRINT_SHA1_ELLIPSIS (old format) test_expect_success 'describe_detached_head does print SHA-1 ellipsis when asked to' " + commit=$(git rev-parse --short=12 master^) && + commit2=$(git rev-parse --short=12 master~2) && + commit3=$(git rev-parse --short=12 master~3) && + # The first detach operation is more chatty than the following ones. - cat >1st_detach <<-'EOF' && + cat >1st_detach <<-EOF && Note: checking out 'HEAD^'. You are in 'detached HEAD' state. You can look around, make experimental @@ -274,18 +282,18 @@ test_expect_success 'describe_detached_head does print SHA-1 ellipsis when asked git checkout -b <new-branch-name> - HEAD is now at 7c7cd714e262... three + HEAD is now at \$commit... three EOF # The remaining ones just show info about previous and current HEADs. - cat >2nd_detach <<-'EOF' && - Previous HEAD position was 7c7cd714e262... three - HEAD is now at 139b20d8e6c5... two + cat >2nd_detach <<-EOF && + Previous HEAD position was \$commit... three + HEAD is now at \$commit2... two EOF - cat >3rd_detach <<-'EOF' && - Previous HEAD position was 139b20d8e6c5... two - HEAD is now at d79ce1670bdc... one + cat >3rd_detach <<-EOF && + Previous HEAD position was \$commit2... two + HEAD is now at \$commit3... one EOF reset && diff --git a/t/t2022-checkout-paths.sh b/t/t2022-checkout-paths.sh index f46d0499bc..fc3eb43b89 100755 --- a/t/t2022-checkout-paths.sh +++ b/t/t2022-checkout-paths.sh @@ -68,13 +68,13 @@ test_expect_success 'do not touch files that are already up-to-date' ' git add file1 file2 && git commit -m base && echo modified >file1 && - test-chmtime =1000000000 file2 && + test-tool chmtime =1000000000 file2 && git update-index -q --refresh && git checkout HEAD -- file1 file2 && echo one >expect && test_cmp expect file1 && - echo "1000000000 file2" >expect && - test-chmtime -v +0 file2 >actual && + echo "1000000000" >expect && + test-tool chmtime --get file2 >actual && test_cmp expect actual ' diff --git a/t/t2025-worktree-add.sh b/t/t2025-worktree-add.sh index 2b95944973..d2e49f7632 100755 --- a/t/t2025-worktree-add.sh +++ b/t/t2025-worktree-add.sh @@ -198,13 +198,25 @@ test_expect_success '"add" with <branch> omitted' ' test_cmp_rev HEAD bat ' -test_expect_success '"add" auto-vivify does not clobber existing branch' ' - test_commit c1 && - test_commit c2 && - git branch precious HEAD~1 && - test_must_fail git worktree add precious && - test_cmp_rev HEAD~1 precious && - test_path_is_missing precious +test_expect_success '"add" checks out existing branch of dwimd name' ' + git branch dwim HEAD~1 && + git worktree add dwim && + test_cmp_rev HEAD~1 dwim && + ( + cd dwim && + test_cmp_rev HEAD dwim + ) +' + +test_expect_success '"add <path>" dwim fails with checked out branch' ' + git checkout -b test-branch && + test_must_fail git worktree add test-branch && + test_path_is_missing test-branch +' + +test_expect_success '"add --force" with existing dwimd name doesnt die' ' + git checkout test-branch && + git worktree add --force test-branch ' test_expect_success '"add" no auto-vivify with --detach and <branch> omitted' ' @@ -451,32 +463,68 @@ test_expect_success 'git worktree --no-guess-remote option overrides config' ' ' post_checkout_hook () { - test_when_finished "rm -f .git/hooks/post-checkout" && - mkdir -p .git/hooks && - write_script .git/hooks/post-checkout <<-\EOF - echo $* >hook.actual + gitdir=${1:-.git} + test_when_finished "rm -f $gitdir/hooks/post-checkout" && + mkdir -p $gitdir/hooks && + write_script $gitdir/hooks/post-checkout <<-\EOF + { + echo $* + git rev-parse --git-dir --show-toplevel + } >hook.actual EOF } test_expect_success '"add" invokes post-checkout hook (branch)' ' post_checkout_hook && - printf "%s %s 1\n" $_z40 $(git rev-parse HEAD) >hook.expect && + { + echo $ZERO_OID $(git rev-parse HEAD) 1 && + echo $(pwd)/.git/worktrees/gumby && + echo $(pwd)/gumby + } >hook.expect && git worktree add gumby && - test_cmp hook.expect hook.actual + test_cmp hook.expect gumby/hook.actual ' test_expect_success '"add" invokes post-checkout hook (detached)' ' post_checkout_hook && - printf "%s %s 1\n" $_z40 $(git rev-parse HEAD) >hook.expect && + { + echo $ZERO_OID $(git rev-parse HEAD) 1 && + echo $(pwd)/.git/worktrees/grumpy && + echo $(pwd)/grumpy + } >hook.expect && git worktree add --detach grumpy && - test_cmp hook.expect hook.actual + test_cmp hook.expect grumpy/hook.actual ' test_expect_success '"add --no-checkout" suppresses post-checkout hook' ' post_checkout_hook && rm -f hook.actual && git worktree add --no-checkout gloopy && - test_path_is_missing hook.actual + test_path_is_missing gloopy/hook.actual +' + +test_expect_success '"add" in other worktree invokes post-checkout hook' ' + post_checkout_hook && + { + echo $ZERO_OID $(git rev-parse HEAD) 1 && + echo $(pwd)/.git/worktrees/guppy && + echo $(pwd)/guppy + } >hook.expect && + git -C gloopy worktree add --detach ../guppy && + test_cmp hook.expect guppy/hook.actual +' + +test_expect_success '"add" in bare repo invokes post-checkout hook' ' + rm -rf bare && + git clone --bare . bare && + { + echo $ZERO_OID $(git --git-dir=bare rev-parse HEAD) 1 && + echo $(pwd)/bare/worktrees/goozy && + echo $(pwd)/goozy + } >hook.expect && + post_checkout_hook bare && + git -C bare worktree add --detach ../goozy && + test_cmp hook.expect goozy/hook.actual ' test_done diff --git a/t/t2026-worktree-prune.sh b/t/t2026-worktree-prune.sh index a0f1e3bb80..b7d6d5d45a 100755 --- a/t/t2026-worktree-prune.sh +++ b/t/t2026-worktree-prune.sh @@ -78,10 +78,9 @@ test_expect_success 'not prune locked checkout' ' test_expect_success 'not prune recent checkouts' ' test_when_finished rm -r .git/worktrees && - mkdir zz && - mkdir -p .git/worktrees/jlm && - echo "$(pwd)"/zz >.git/worktrees/jlm/gitdir && - rmdir zz && + git worktree add jlm HEAD && + test -d .git/worktrees/jlm && + rm -rf jlm && git worktree prune --verbose --expire=2.days.ago && test -d .git/worktrees/jlm ' diff --git a/t/t2027-worktree-list.sh b/t/t2027-worktree-list.sh index 720063bf0d..bb6fb9b12c 100755 --- a/t/t2027-worktree-list.sh +++ b/t/t2027-worktree-list.sh @@ -116,7 +116,7 @@ test_expect_success 'broken main worktree still at the top' ' git worktree add linked && cat >expected <<-EOF && worktree $(pwd) - HEAD $_z40 + HEAD $ZERO_OID EOF cd linked && diff --git a/t/t2028-worktree-move.sh b/t/t2028-worktree-move.sh index 8298aaf97f..5f7d45b7b7 100755 --- a/t/t2028-worktree-move.sh +++ b/t/t2028-worktree-move.sh @@ -7,7 +7,8 @@ test_description='test git worktree move, remove, lock and unlock' test_expect_success 'setup' ' test_commit init && git worktree add source && - git worktree list --porcelain | grep "^worktree" >actual && + git worktree list --porcelain >out && + grep "^worktree" out >actual && cat <<-EOF >expected && worktree $(pwd) worktree $(pwd)/source @@ -59,4 +60,85 @@ test_expect_success 'unlock worktree twice' ' test_path_is_missing .git/worktrees/source/locked ' +test_expect_success 'move non-worktree' ' + mkdir abc && + test_must_fail git worktree move abc def +' + +test_expect_success 'move locked worktree' ' + git worktree lock source && + test_when_finished "git worktree unlock source" && + test_must_fail git worktree move source destination +' + +test_expect_success 'move worktree' ' + git worktree move source destination && + test_path_is_missing source && + git worktree list --porcelain >out && + grep "^worktree.*/destination$" out && + ! grep "^worktree.*/source$" out && + git -C destination log --format=%s >actual2 && + echo init >expected2 && + test_cmp expected2 actual2 +' + +test_expect_success 'move main worktree' ' + test_must_fail git worktree move . def +' + +test_expect_success 'move worktree to another dir' ' + mkdir some-dir && + git worktree move destination some-dir && + test_when_finished "git worktree move some-dir/destination destination" && + test_path_is_missing destination && + git worktree list --porcelain >out && + grep "^worktree.*/some-dir/destination$" out && + git -C some-dir/destination log --format=%s >actual2 && + echo init >expected2 && + test_cmp expected2 actual2 +' + +test_expect_success 'remove main worktree' ' + test_must_fail git worktree remove . +' + +test_expect_success 'remove locked worktree' ' + git worktree lock destination && + test_when_finished "git worktree unlock destination" && + test_must_fail git worktree remove destination +' + +test_expect_success 'remove worktree with dirty tracked file' ' + echo dirty >>destination/init.t && + test_when_finished "git -C destination checkout init.t" && + test_must_fail git worktree remove destination +' + +test_expect_success 'remove worktree with untracked file' ' + : >destination/untracked && + test_must_fail git worktree remove destination +' + +test_expect_success 'force remove worktree with untracked file' ' + git worktree remove --force destination && + test_path_is_missing destination +' + +test_expect_success 'remove missing worktree' ' + git worktree add to-be-gone && + test -d .git/worktrees/to-be-gone && + mv to-be-gone gone && + git worktree remove to-be-gone && + test_path_is_missing .git/worktrees/to-be-gone +' + +test_expect_success 'NOT remove missing-but-locked worktree' ' + git worktree add gone-but-locked && + git worktree lock gone-but-locked && + test -d .git/worktrees/gone-but-locked && + mv gone-but-locked really-gone-now && + test_must_fail git worktree remove gone-but-locked && + test_path_is_dir .git/worktrees/gone-but-locked +' + test_done diff --git a/t/t2101-update-index-reupdate.sh b/t/t2101-update-index-reupdate.sh index c8bce8c2e4..685ec45639 100755 --- a/t/t2101-update-index-reupdate.sh +++ b/t/t2101-update-index-reupdate.sh @@ -8,19 +8,20 @@ test_description='git update-index --again test. . ./test-lib.sh -cat > expected <<\EOF -100644 3b18e512dba79e4c8300dd08aeb37f8e728b8dad 0 file1 -100644 9db8893856a8a02eaa73470054b7c1c5a7c82e47 0 file2 -EOF -test_expect_success 'update-index --add' \ - 'echo hello world >file1 && - echo goodbye people >file2 && - git update-index --add file1 file2 && - git ls-files -s >current && - cmp current expected' +test_expect_success 'update-index --add' ' + echo hello world >file1 && + echo goodbye people >file2 && + git update-index --add file1 file2 && + git ls-files -s >current && + cat >expected <<-EOF && + 100644 $(git hash-object file1) 0 file1 + 100644 $(git hash-object file2) 0 file2 + EOF + cmp current expected +' -test_expect_success 'update-index --again' \ - 'rm -f file1 && +test_expect_success 'update-index --again' ' + rm -f file1 && echo hello everybody >file2 && if git update-index --again then @@ -29,25 +30,23 @@ test_expect_success 'update-index --again' \ else echo happy - failed as expected fi && - git ls-files -s >current && - cmp current expected' + git ls-files -s >current && + cmp current expected +' -cat > expected <<\EOF -100644 0f1ae1422c2bf43f117d3dbd715c988a9ed2103f 0 file2 -EOF -test_expect_success 'update-index --remove --again' \ - 'git update-index --remove --again && - git ls-files -s >current && - cmp current expected' +test_expect_success 'update-index --remove --again' ' + git update-index --remove --again && + git ls-files -s >current && + cat >expected <<-EOF && + 100644 $(git hash-object file2) 0 file2 + EOF + cmp current expected +' test_expect_success 'first commit' 'git commit -m initial' -cat > expected <<\EOF -100644 53ab446c3f4e42ce9bb728a0ccb283a101be4979 0 dir1/file3 -100644 0f1ae1422c2bf43f117d3dbd715c988a9ed2103f 0 file2 -EOF -test_expect_success 'update-index again' \ - 'mkdir -p dir1 && +test_expect_success 'update-index again' ' + mkdir -p dir1 && echo hello world >dir1/file3 && echo goodbye people >file2 && git update-index --add file2 dir1/file3 && @@ -55,30 +54,38 @@ test_expect_success 'update-index again' \ echo happy >dir1/file3 && git update-index --again && git ls-files -s >current && - cmp current expected' + cat >expected <<-EOF && + 100644 $(git hash-object dir1/file3) 0 dir1/file3 + 100644 $(git hash-object file2) 0 file2 + EOF + cmp current expected +' -cat > expected <<\EOF -100644 d7fb3f695f06c759dbf3ab00046e7cc2da22d10f 0 dir1/file3 -100644 0f1ae1422c2bf43f117d3dbd715c988a9ed2103f 0 file2 -EOF -test_expect_success 'update-index --update from subdir' \ - 'echo not so happy >file2 && +file2=$(git hash-object file2) +test_expect_success 'update-index --update from subdir' ' + echo not so happy >file2 && (cd dir1 && cat ../file2 >file3 && git update-index --again ) && git ls-files -s >current && - cmp current expected' + cat >expected <<-EOF && + 100644 $(git hash-object dir1/file3) 0 dir1/file3 + 100644 $file2 0 file2 + EOF + test_cmp current expected +' -cat > expected <<\EOF -100644 594fb5bb1759d90998e2bf2a38261ae8e243c760 0 dir1/file3 -100644 0f1ae1422c2bf43f117d3dbd715c988a9ed2103f 0 file2 -EOF -test_expect_success 'update-index --update with pathspec' \ - 'echo very happy >file2 && +test_expect_success 'update-index --update with pathspec' ' + echo very happy >file2 && cat file2 >dir1/file3 && git update-index --again dir1/ && git ls-files -s >current && - cmp current expected' + cat >expected <<-EOF && + 100644 $(git hash-object dir1/file3) 0 dir1/file3 + 100644 $file2 0 file2 + EOF + cmp current expected +' test_done diff --git a/t/t2104-update-index-skip-worktree.sh b/t/t2104-update-index-skip-worktree.sh index cc830da58d..7e2e7dd4ae 100755 --- a/t/t2104-update-index-skip-worktree.sh +++ b/t/t2104-update-index-skip-worktree.sh @@ -33,7 +33,7 @@ test_expect_success 'setup' ' ' test_expect_success 'index is at version 2' ' - test "$(test-index-version < .git/index)" = 2 + test "$(test-tool index-version < .git/index)" = 2 ' test_expect_success 'update-index --skip-worktree' ' @@ -42,7 +42,7 @@ test_expect_success 'update-index --skip-worktree' ' ' test_expect_success 'index is at version 3 after having some skip-worktree entries' ' - test "$(test-index-version < .git/index)" = 3 + test "$(test-tool index-version < .git/index)" = 3 ' test_expect_success 'ls-files -t' ' @@ -55,7 +55,7 @@ test_expect_success 'update-index --no-skip-worktree' ' ' test_expect_success 'index version is back to 2 when there is no skip-worktree entry' ' - test "$(test-index-version < .git/index)" = 2 + test "$(test-tool index-version < .git/index)" = 2 ' test_done diff --git a/t/t2107-update-index-basic.sh b/t/t2107-update-index-basic.sh index 32ac6e09bd..2242cd098e 100755 --- a/t/t2107-update-index-basic.sh +++ b/t/t2107-update-index-basic.sh @@ -37,7 +37,7 @@ test_expect_success '--cacheinfo does not accept blob null sha1' ' echo content >file && git add file && git rev-parse :file >expect && - test_must_fail git update-index --cacheinfo 100644 $_z40 file && + test_must_fail git update-index --cacheinfo 100644 $ZERO_OID file && git rev-parse :file >actual && test_cmp expect actual ' @@ -47,7 +47,7 @@ test_expect_success '--cacheinfo does not accept gitlink null sha1' ' (cd submodule && test_commit foo) && git add submodule && git rev-parse :submodule >expect && - test_must_fail git update-index --cacheinfo 160000 $_z40 submodule && + test_must_fail git update-index --cacheinfo 160000 $ZERO_OID submodule && git rev-parse :submodule >actual && test_cmp expect actual ' @@ -85,9 +85,9 @@ test_expect_success '--chmod=+x and chmod=-x in the same argument list' ' >B && git add A B && git update-index --chmod=+x A --chmod=-x B && - cat >expect <<-\EOF && - 100755 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 A - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 B + cat >expect <<-EOF && + 100755 $EMPTY_BLOB 0 A + 100644 $EMPTY_BLOB 0 B EOF git ls-files --stage A B >actual && test_cmp expect actual diff --git a/t/t2201-add-update-typechange.sh b/t/t2201-add-update-typechange.sh index 954fc51e5b..a4eec0a346 100755 --- a/t/t2201-add-update-typechange.sh +++ b/t/t2201-add-update-typechange.sh @@ -75,35 +75,35 @@ test_expect_success modify ' git ls-tree -r HEAD | sed -e "s/^/:/" -e " / caskly/{ - s/ caskly/ $_z40 D&/ + s/ caskly/ $ZERO_OID D&/ s/blob/000000/ } / nitfol/{ - s/ nitfol/ $_z40 $T_letter&/ + s/ nitfol/ $ZERO_OID $T_letter&/ s/blob/100644/ } / rezrov.bozbar/{ - s/ rezrov.bozbar/ $_z40 D&/ + s/ rezrov.bozbar/ $ZERO_OID D&/ s/blob/000000/ } / xyzzy/{ - s/ xyzzy/ $_z40 D&/ + s/ xyzzy/ $ZERO_OID D&/ s/blob/000000/ } / yomin/{ - s/ yomin/ $_z40 T&/ + s/ yomin/ $ZERO_OID T&/ s/blob/160000/ } " } >expect && { cat expect - echo ":100644 160000 $_empty $_z40 T yonk" - echo ":100644 000000 $_empty $_z40 D zifmia" + echo ":100644 160000 $_empty $ZERO_OID T yonk" + echo ":100644 000000 $_empty $ZERO_OID D zifmia" } >expect-files && { cat expect - echo ":000000 160000 $_z40 $_z40 A yonk" + echo ":000000 160000 $ZERO_OID $ZERO_OID A yonk" } >expect-index && { echo "100644 $_empty 0 nitfol" diff --git a/t/t2203-add-intent.sh b/t/t2203-add-intent.sh index 78236dc7d8..e7a400b4c7 100755 --- a/t/t2203-add-intent.sh +++ b/t/t2203-add-intent.sh @@ -27,12 +27,12 @@ test_expect_success 'git status' ' test_expect_success 'git status with porcelain v2' ' git status --porcelain=v2 | grep -v "^?" >actual && - nam1=d00491fd7e5bb6fa28c517a0bb32b8b506539d4d && - nam2=ce013625030ba8dba906f756967f9e9ca394464a && + nam1=$(echo 1 | git hash-object --stdin) && + nam2=$(git hash-object elif) && cat >expect <<-EOF && - 1 DA N... 100644 000000 100644 $nam1 $_z40 1.t - 1 A. N... 000000 100644 100644 $_z40 $nam2 elif - 1 .A N... 000000 000000 100644 $_z40 $_z40 file + 1 DA N... 100644 000000 100644 $nam1 $ZERO_OID 1.t + 1 A. N... 000000 100644 100644 $ZERO_OID $nam2 elif + 1 .A N... 000000 000000 100644 $ZERO_OID $ZERO_OID file EOF test_cmp expect actual ' @@ -70,8 +70,7 @@ test_expect_success 'i-t-a entry is simply ignored' ' git commit -m second && test $(git ls-tree HEAD -- nitfol | wc -l) = 0 && test $(git diff --name-only HEAD -- nitfol | wc -l) = 1 && - test $(git diff --name-only --ita-invisible-in-index HEAD -- nitfol | wc -l) = 0 && - test $(git diff --name-only --ita-invisible-in-index -- nitfol | wc -l) = 1 + test $(git diff --name-only -- nitfol | wc -l) = 1 ' test_expect_success 'can commit with an unrelated i-t-a entry in index' ' @@ -99,13 +98,13 @@ test_expect_success 'cache-tree invalidates i-t-a paths' ' : >dir/bar && git add -N dir/bar && - git diff --cached --name-only >actual && + git diff --name-only >actual && echo dir/bar >expect && test_cmp expect actual && git write-tree >/dev/null && - git diff --cached --name-only >actual && + git diff --name-only >actual && echo dir/bar >expect && test_cmp expect actual ' @@ -181,12 +180,24 @@ test_expect_success 'rename detection finds the right names' ' EOF test_cmp expected.2 actual.2 && - hash=12f00e90b6ef79117ce6e650416b8cf517099b78 && + hash=$(git hash-object third) && git status --porcelain=v2 | grep -v "^?" >actual.3 && cat >expected.3 <<-EOF && 2 .R N... 100644 100644 100644 $hash $hash R100 third first EOF - test_cmp expected.3 actual.3 + test_cmp expected.3 actual.3 && + + git diff --stat >actual.4 && + cat >expected.4 <<-EOF && + first => third | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + EOF + test_cmp expected.4 actual.4 && + + git diff --cached --stat >actual.5 && + : >expected.5 && + test_cmp expected.5 actual.5 + ) ' @@ -212,7 +223,7 @@ test_expect_success 'double rename detection in status' ' EOF test_cmp expected.2 actual.2 && - hash=12f00e90b6ef79117ce6e650416b8cf517099b78 && + hash=$(git hash-object third) && git status --porcelain=v2 | grep -v "^?" >actual.3 && cat >expected.3 <<-EOF && 2 R. N... 100644 100644 100644 $hash $hash R100 second first @@ -222,5 +233,46 @@ test_expect_success 'double rename detection in status' ' ) ' -test_done +test_expect_success 'diff-files/diff-cached shows ita as new/not-new files' ' + git reset --hard && + echo new >new-ita && + git add -N new-ita && + git diff --summary >actual && + echo " create mode 100644 new-ita" >expected && + test_cmp expected actual && + git diff --cached --summary >actual2 && + : >expected2 && + test_cmp expected2 actual2 +' + +test_expect_success '"diff HEAD" includes ita as new files' ' + git reset --hard && + echo new >new-ita && + git add -N new-ita && + git diff HEAD >actual && + cat >expected <<-\EOF && + diff --git a/new-ita b/new-ita + new file mode 100644 + index 0000000..3e75765 + --- /dev/null + +++ b/new-ita + @@ -0,0 +1 @@ + +new + EOF + test_cmp expected actual +' + +test_expect_success 'apply --intent-to-add' ' + git reset --hard && + echo new >new-ita && + git add -N new-ita && + git diff >expected && + grep "new file" expected && + git reset --hard && + git apply --intent-to-add expected && + git diff >actual && + test_cmp expected actual +' + +test_done diff --git a/t/t3008-ls-files-lazy-init-name-hash.sh b/t/t3008-ls-files-lazy-init-name-hash.sh index bdf5198b7e..08af596ba6 100755 --- a/t/t3008-ls-files-lazy-init-name-hash.sh +++ b/t/t3008-ls-files-lazy-init-name-hash.sh @@ -4,7 +4,7 @@ test_description='Test the lazy init name hash with various folder structures' . ./test-lib.sh -if test 1 -eq $($GIT_BUILD_DIR/t/helper/test-online-cpus) +if test 1 -eq $($GIT_BUILD_DIR/t/helper/test-tool online-cpus) then skip_all='skipping lazy-init tests, single cpu' test_done @@ -21,7 +21,7 @@ test_expect_success 'no buffer overflow in lazy_init_name_hash' ' ) | sed "s/^/100644 $EMPTY_BLOB /" | git update-index --index-info && - test-lazy-init-name-hash -m + test-tool lazy-init-name-hash -m ' test_done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index cdc38fe5d1..3563e77b37 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -525,20 +525,22 @@ test_expect_success 'merge-recursive w/ empty work tree - ours has rename' ' GIT_INDEX_FILE="$PWD/ours-has-rename-index" && export GIT_INDEX_FILE && mkdir "$GIT_WORK_TREE" && - git read-tree -i -m $c7 && - git update-index --ignore-missing --refresh && - git merge-recursive $c0 -- $c7 $c3 && - git ls-files -s >actual-files - ) 2>actual-err && - >expected-err && + git read-tree -i -m $c7 2>actual-err && + test_must_be_empty actual-err && + git update-index --ignore-missing --refresh 2>actual-err && + test_must_be_empty actual-err && + git merge-recursive $c0 -- $c7 $c3 2>actual-err && + test_must_be_empty actual-err && + git ls-files -s >actual-files 2>actual-err && + test_must_be_empty actual-err + ) && cat >expected-files <<-EOF && 100644 $o3 0 b/c 100644 $o0 0 c 100644 $o0 0 d/e 100644 $o0 0 e EOF - test_cmp expected-files actual-files && - test_cmp expected-err actual-err + test_cmp expected-files actual-files ' test_expect_success 'merge-recursive w/ empty work tree - theirs has rename' ' @@ -548,20 +550,22 @@ test_expect_success 'merge-recursive w/ empty work tree - theirs has rename' ' GIT_INDEX_FILE="$PWD/theirs-has-rename-index" && export GIT_INDEX_FILE && mkdir "$GIT_WORK_TREE" && - git read-tree -i -m $c3 && - git update-index --ignore-missing --refresh && - git merge-recursive $c0 -- $c3 $c7 && - git ls-files -s >actual-files - ) 2>actual-err && - >expected-err && + git read-tree -i -m $c3 2>actual-err && + test_must_be_empty actual-err && + git update-index --ignore-missing --refresh 2>actual-err && + test_must_be_empty actual-err && + git merge-recursive $c0 -- $c3 $c7 2>actual-err && + test_must_be_empty actual-err && + git ls-files -s >actual-files 2>actual-err && + test_must_be_empty actual-err + ) && cat >expected-files <<-EOF && 100644 $o3 0 b/c 100644 $o0 0 c 100644 $o0 0 d/e 100644 $o0 0 e EOF - test_cmp expected-files actual-files && - test_cmp expected-err actual-err + test_cmp expected-files actual-files ' test_expect_success 'merge removes empty directories' ' diff --git a/t/t3034-merge-recursive-rename-options.sh b/t/t3034-merge-recursive-rename-options.sh index b9c4028496..3d9fae68c4 100755 --- a/t/t3034-merge-recursive-rename-options.sh +++ b/t/t3034-merge-recursive-rename-options.sh @@ -309,4 +309,22 @@ test_expect_success 'last wins in --find-renames=<m> --rename-threshold=<n>' ' check_threshold_0 ' +test_expect_success 'merge.renames disables rename detection' ' + git read-tree --reset -u HEAD && + git -c merge.renames=false merge-recursive $tail && + check_no_renames +' + +test_expect_success 'merge.renames defaults to diff.renames' ' + git read-tree --reset -u HEAD && + git -c diff.renames=false merge-recursive $tail && + check_no_renames +' + +test_expect_success 'merge.renames overrides diff.renames' ' + git read-tree --reset -u HEAD && + test_must_fail git -c diff.renames=false -c merge.renames=true merge-recursive $tail && + $check_50 +' + test_done diff --git a/t/t3035-merge-sparse.sh b/t/t3035-merge-sparse.sh new file mode 100755 index 0000000000..0c0b433bd3 --- /dev/null +++ b/t/t3035-merge-sparse.sh @@ -0,0 +1,59 @@ +#!/bin/sh + +test_description='merge with sparse files' + +. ./test-lib.sh + +# test_file $filename $content +test_file () { + echo "$2" > "$1" && + git add "$1" +} + +# test_commit_this $message_and_tag +test_commit_this () { + git commit -m "$1" && + git tag "$1" +} + +test_expect_success 'setup' ' + : >empty && + test_file checked-out init && + test_file modify_delete modify_delete_init && + test_commit_this init && + test_file modify_delete modify_delete_theirs && + test_commit_this theirs && + git reset --hard init && + git rm modify_delete && + test_commit_this ours && + git config core.sparseCheckout true && + echo "/checked-out" >.git/info/sparse-checkout && + git reset --hard && + ! git merge theirs +' + +test_expect_success 'reset --hard works after the conflict' ' + git reset --hard +' + +test_expect_success 'is reset properly' ' + git status --porcelain -- modify_delete >out && + test_cmp empty out && + test_path_is_missing modify_delete +' + +test_expect_success 'setup: conflict back' ' + ! git merge theirs +' + +test_expect_success 'Merge abort works after the conflict' ' + git merge --abort +' + +test_expect_success 'is aborted properly' ' + git status --porcelain -- modify_delete >out && + test_cmp empty out && + test_path_is_missing modify_delete +' + +test_done diff --git a/t/t3070-wildmatch.sh b/t/t3070-wildmatch.sh index 163a14a1c2..dce102130f 100755 --- a/t/t3070-wildmatch.sh +++ b/t/t3070-wildmatch.sh @@ -4,266 +4,431 @@ test_description='wildmatch tests' . ./test-lib.sh -match() { - if [ $1 = 1 ]; then - test_expect_success "wildmatch: match '$3' '$4'" " - test-wildmatch wildmatch '$3' '$4' - " - else - test_expect_success "wildmatch: no match '$3' '$4'" " - ! test-wildmatch wildmatch '$3' '$4' - " - fi +should_create_test_file() { + file=$1 + + case $file in + # `touch .` will succeed but obviously not do what we intend + # here. + ".") + return 1 + ;; + # We cannot create a file with an empty filename. + "") + return 1 + ;; + # The tests that are testing that e.g. foo//bar is matched by + # foo/*/bar can't be tested on filesystems since there's no + # way we're getting a double slash. + *//*) + return 1 + ;; + # When testing the difference between foo/bar and foo/bar/ we + # can't test the latter. + */) + return 1 + ;; + # On Windows, \ in paths is silently converted to /, which + # would result in the "touch" below working, but the test + # itself failing. See 6fd1106aa4 ("t3700: Skip a test with + # backslashes in pathspec", 2009-03-13) for prior art and + # details. + *\\*) + if ! test_have_prereq BSLASHPSPEC + then + return 1 + fi + # NOTE: The ;;& bash extension is not portable, so + # this test needs to be at the end of the pattern + # list. + # + # If we want to add more conditional returns we either + # need a new case statement, or turn this whole thing + # into a series of "if" tests. + ;; + esac + + + # On Windows proper (i.e. not Cygwin) many file names which + # under Cygwin would be emulated don't work. + if test_have_prereq MINGW + then + case $file in + " ") + # Files called " " are forbidden on Windows + return 1 + ;; + *\<*|*\>*|*:*|*\"*|*\|*|*\?*|*\**) + # Files with various special characters aren't + # allowed on Windows. Sourced from + # https://stackoverflow.com/a/31976060 + return 1 + ;; + esac + fi + + return 0 } -imatch() { - if [ $1 = 1 ]; then - test_expect_success "iwildmatch: match '$2' '$3'" " - test-wildmatch iwildmatch '$2' '$3' - " - else - test_expect_success "iwildmatch: no match '$2' '$3'" " - ! test-wildmatch iwildmatch '$2' '$3' - " - fi +match_with_function() { + text=$1 + pattern=$2 + match_expect=$3 + match_function=$4 + + if test "$match_expect" = 1 + then + test_expect_success "$match_function: match '$text' '$pattern'" " + test-tool wildmatch $match_function '$text' '$pattern' + " + elif test "$match_expect" = 0 + then + test_expect_success "$match_function: no match '$text' '$pattern'" " + test_must_fail test-tool wildmatch $match_function '$text' '$pattern' + " + else + test_expect_success "PANIC: Test framework error. Unknown matches value $match_expect" 'false' + fi + +} + +match_with_ls_files() { + text=$1 + pattern=$2 + match_expect=$3 + match_function=$4 + ls_files_args=$5 + + match_stdout_stderr_cmp=" + tr -d '\0' <actual.raw >actual && + >expect.err && + test_cmp expect.err actual.err && + test_cmp expect actual" + + if test "$match_expect" = 'E' + then + if test -e .git/created_test_file + then + test_expect_success EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match dies on '$pattern' '$text'" " + printf '%s' '$text' >expect && + test_must_fail git$ls_files_args ls-files -z -- '$pattern' + " + else + test_expect_failure EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match skip '$pattern' '$text'" 'false' + fi + elif test "$match_expect" = 1 + then + if test -e .git/created_test_file + then + test_expect_success EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match '$pattern' '$text'" " + printf '%s' '$text' >expect && + git$ls_files_args ls-files -z -- '$pattern' >actual.raw 2>actual.err && + $match_stdout_stderr_cmp + " + else + test_expect_failure EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): match skip '$pattern' '$text'" 'false' + fi + elif test "$match_expect" = 0 + then + if test -e .git/created_test_file + then + test_expect_success EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): no match '$pattern' '$text'" " + >expect && + git$ls_files_args ls-files -z -- '$pattern' >actual.raw 2>actual.err && + $match_stdout_stderr_cmp + " + else + test_expect_failure EXPENSIVE_ON_WINDOWS "$match_function (via ls-files): no match skip '$pattern' '$text'" 'false' + fi + else + test_expect_success "PANIC: Test framework error. Unknown matches value $match_expect" 'false' + fi } -pathmatch() { - if [ $1 = 1 ]; then - test_expect_success "pathmatch: match '$2' '$3'" " - test-wildmatch pathmatch '$2' '$3' - " - else - test_expect_success "pathmatch: no match '$2' '$3'" " - ! test-wildmatch pathmatch '$2' '$3' - " - fi +match() { + if test "$#" = 6 + then + # When test-tool wildmatch and git ls-files produce the same + # result. + match_glob=$1 + match_file_glob=$match_glob + match_iglob=$2 + match_file_iglob=$match_iglob + match_pathmatch=$3 + match_file_pathmatch=$match_pathmatch + match_pathmatchi=$4 + match_file_pathmatchi=$match_pathmatchi + text=$5 + pattern=$6 + elif test "$#" = 10 + then + match_glob=$1 + match_iglob=$2 + match_pathmatch=$3 + match_pathmatchi=$4 + match_file_glob=$5 + match_file_iglob=$6 + match_file_pathmatch=$7 + match_file_pathmatchi=$8 + text=$9 + pattern=${10} + fi + + test_expect_success EXPENSIVE_ON_WINDOWS 'cleanup after previous file test' ' + if test -e .git/created_test_file + then + git reset && + git clean -df + fi + ' + + printf '%s' "$text" >.git/expected_test_file + + test_expect_success EXPENSIVE_ON_WINDOWS "setup match file test for $text" ' + file=$(cat .git/expected_test_file) && + if should_create_test_file "$file" + then + dirs=${file%/*} + if test "$file" != "$dirs" + then + mkdir -p -- "$dirs" && + touch -- "./$text" + else + touch -- "./$file" + fi && + git add -A && + printf "%s" "$file" >.git/created_test_file + elif test -e .git/created_test_file + then + rm .git/created_test_file + fi + ' + + # $1: Case sensitive glob match: test-tool wildmatch & ls-files + match_with_function "$text" "$pattern" $match_glob "wildmatch" + match_with_ls_files "$text" "$pattern" $match_file_glob "wildmatch" " --glob-pathspecs" + + # $2: Case insensitive glob match: test-tool wildmatch & ls-files + match_with_function "$text" "$pattern" $match_iglob "iwildmatch" + match_with_ls_files "$text" "$pattern" $match_file_iglob "iwildmatch" " --glob-pathspecs --icase-pathspecs" + + # $3: Case sensitive path match: test-tool wildmatch & ls-files + match_with_function "$text" "$pattern" $match_pathmatch "pathmatch" + match_with_ls_files "$text" "$pattern" $match_file_pathmatch "pathmatch" "" + + # $4: Case insensitive path match: test-tool wildmatch & ls-files + match_with_function "$text" "$pattern" $match_pathmatchi "ipathmatch" + match_with_ls_files "$text" "$pattern" $match_file_pathmatchi "ipathmatch" " --icase-pathspecs" } -# Basic wildmat features -match 1 1 foo foo -match 0 0 foo bar -match 1 1 '' "" -match 1 1 foo '???' -match 0 0 foo '??' -match 1 1 foo '*' -match 1 1 foo 'f*' -match 0 0 foo '*f' -match 1 1 foo '*foo*' -match 1 1 foobar '*ob*a*r*' -match 1 1 aaaaaaabababab '*ab' -match 1 1 'foo*' 'foo\*' -match 0 0 foobar 'foo\*bar' -match 1 1 'f\oo' 'f\\oo' -match 1 1 ball '*[al]?' -match 0 0 ten '[ten]' -match 0 1 ten '**[!te]' -match 0 0 ten '**[!ten]' -match 1 1 ten 't[a-g]n' -match 0 0 ten 't[!a-g]n' -match 1 1 ton 't[!a-g]n' -match 1 1 ton 't[^a-g]n' -match 1 x 'a]b' 'a[]]b' -match 1 x a-b 'a[]-]b' -match 1 x 'a]b' 'a[]-]b' -match 0 x aab 'a[]-]b' -match 1 x aab 'a[]a-]b' -match 1 1 ']' ']' +# Basic wildmatch features +match 1 1 1 1 foo foo +match 0 0 0 0 foo bar +match 1 1 1 1 '' "" +match 1 1 1 1 foo '???' +match 0 0 0 0 foo '??' +match 1 1 1 1 foo '*' +match 1 1 1 1 foo 'f*' +match 0 0 0 0 foo '*f' +match 1 1 1 1 foo '*foo*' +match 1 1 1 1 foobar '*ob*a*r*' +match 1 1 1 1 aaaaaaabababab '*ab' +match 1 1 1 1 'foo*' 'foo\*' +match 0 0 0 0 foobar 'foo\*bar' +match 1 1 1 1 'f\oo' 'f\\oo' +match 1 1 1 1 ball '*[al]?' +match 0 0 0 0 ten '[ten]' +match 0 0 1 1 ten '**[!te]' +match 0 0 0 0 ten '**[!ten]' +match 1 1 1 1 ten 't[a-g]n' +match 0 0 0 0 ten 't[!a-g]n' +match 1 1 1 1 ton 't[!a-g]n' +match 1 1 1 1 ton 't[^a-g]n' +match 1 1 1 1 'a]b' 'a[]]b' +match 1 1 1 1 a-b 'a[]-]b' +match 1 1 1 1 'a]b' 'a[]-]b' +match 0 0 0 0 aab 'a[]-]b' +match 1 1 1 1 aab 'a[]a-]b' +match 1 1 1 1 ']' ']' # Extended slash-matching features -match 0 0 'foo/baz/bar' 'foo*bar' -match 0 0 'foo/baz/bar' 'foo**bar' -match 0 1 'foobazbar' 'foo**bar' -match 1 1 'foo/baz/bar' 'foo/**/bar' -match 1 0 'foo/baz/bar' 'foo/**/**/bar' -match 1 0 'foo/b/a/z/bar' 'foo/**/bar' -match 1 0 'foo/b/a/z/bar' 'foo/**/**/bar' -match 1 0 'foo/bar' 'foo/**/bar' -match 1 0 'foo/bar' 'foo/**/**/bar' -match 0 0 'foo/bar' 'foo?bar' -match 0 0 'foo/bar' 'foo[/]bar' -match 0 0 'foo/bar' 'foo[^a-z]bar' -match 0 0 'foo/bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' -match 1 1 'foo-bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' -match 1 0 'foo' '**/foo' -match 1 x 'XXX/foo' '**/foo' -match 1 0 'bar/baz/foo' '**/foo' -match 0 0 'bar/baz/foo' '*/foo' -match 0 0 'foo/bar/baz' '**/bar*' -match 1 0 'deep/foo/bar/baz' '**/bar/*' -match 0 0 'deep/foo/bar/baz/' '**/bar/*' -match 1 0 'deep/foo/bar/baz/' '**/bar/**' -match 0 0 'deep/foo/bar' '**/bar/*' -match 1 0 'deep/foo/bar/' '**/bar/**' -match 0 0 'foo/bar/baz' '**/bar**' -match 1 0 'foo/bar/baz/x' '*/bar/**' -match 0 0 'deep/foo/bar/baz/x' '*/bar/**' -match 1 0 'deep/foo/bar/baz/x' '**/bar/*/*' +match 0 0 1 1 'foo/baz/bar' 'foo*bar' +match 0 0 1 1 'foo/baz/bar' 'foo**bar' +match 0 0 1 1 'foobazbar' 'foo**bar' +match 1 1 1 1 'foo/baz/bar' 'foo/**/bar' +match 1 1 0 0 'foo/baz/bar' 'foo/**/**/bar' +match 1 1 1 1 'foo/b/a/z/bar' 'foo/**/bar' +match 1 1 1 1 'foo/b/a/z/bar' 'foo/**/**/bar' +match 1 1 0 0 'foo/bar' 'foo/**/bar' +match 1 1 0 0 'foo/bar' 'foo/**/**/bar' +match 0 0 1 1 'foo/bar' 'foo?bar' +match 0 0 1 1 'foo/bar' 'foo[/]bar' +match 0 0 1 1 'foo/bar' 'foo[^a-z]bar' +match 0 0 1 1 'foo/bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' +match 1 1 1 1 'foo-bar' 'f[^eiu][^eiu][^eiu][^eiu][^eiu]r' +match 1 1 0 0 'foo' '**/foo' +match 1 1 1 1 'XXX/foo' '**/foo' +match 1 1 1 1 'bar/baz/foo' '**/foo' +match 0 0 1 1 'bar/baz/foo' '*/foo' +match 0 0 1 1 'foo/bar/baz' '**/bar*' +match 1 1 1 1 'deep/foo/bar/baz' '**/bar/*' +match 0 0 1 1 'deep/foo/bar/baz/' '**/bar/*' +match 1 1 1 1 'deep/foo/bar/baz/' '**/bar/**' +match 0 0 0 0 'deep/foo/bar' '**/bar/*' +match 1 1 1 1 'deep/foo/bar/' '**/bar/**' +match 0 0 1 1 'foo/bar/baz' '**/bar**' +match 1 1 1 1 'foo/bar/baz/x' '*/bar/**' +match 0 0 1 1 'deep/foo/bar/baz/x' '*/bar/**' +match 1 1 1 1 'deep/foo/bar/baz/x' '**/bar/*/*' # Various additional tests -match 0 0 'acrt' 'a[c-c]st' -match 1 1 'acrt' 'a[c-c]rt' -match 0 0 ']' '[!]-]' -match 1 x 'a' '[!]-]' -match 0 0 '' '\' -match 0 x '\' '\' -match 0 x 'XXX/\' '*/\' -match 1 x 'XXX/\' '*/\\' -match 1 1 'foo' 'foo' -match 1 1 '@foo' '@foo' -match 0 0 'foo' '@foo' -match 1 1 '[ab]' '\[ab]' -match 1 1 '[ab]' '[[]ab]' -match 1 x '[ab]' '[[:]ab]' -match 0 x '[ab]' '[[::]ab]' -match 1 x '[ab]' '[[:digit]ab]' -match 1 x '[ab]' '[\[:]ab]' -match 1 1 '?a?b' '\??\?b' -match 1 1 'abc' '\a\b\c' -match 0 0 'foo' '' -match 1 0 'foo/bar/baz/to' '**/t[o]' +match 0 0 0 0 'acrt' 'a[c-c]st' +match 1 1 1 1 'acrt' 'a[c-c]rt' +match 0 0 0 0 ']' '[!]-]' +match 1 1 1 1 'a' '[!]-]' +match 0 0 0 0 '' '\' +match 0 0 0 0 \ + 1 1 1 1 '\' '\' +match 0 0 0 0 'XXX/\' '*/\' +match 1 1 1 1 'XXX/\' '*/\\' +match 1 1 1 1 'foo' 'foo' +match 1 1 1 1 '@foo' '@foo' +match 0 0 0 0 'foo' '@foo' +match 1 1 1 1 '[ab]' '\[ab]' +match 1 1 1 1 '[ab]' '[[]ab]' +match 1 1 1 1 '[ab]' '[[:]ab]' +match 0 0 0 0 '[ab]' '[[::]ab]' +match 1 1 1 1 '[ab]' '[[:digit]ab]' +match 1 1 1 1 '[ab]' '[\[:]ab]' +match 1 1 1 1 '?a?b' '\??\?b' +match 1 1 1 1 'abc' '\a\b\c' +match 0 0 0 0 \ + E E E E 'foo' '' +match 1 1 1 1 'foo/bar/baz/to' '**/t[o]' # Character class tests -match 1 x 'a1B' '[[:alpha:]][[:digit:]][[:upper:]]' -match 0 x 'a' '[[:digit:][:upper:][:space:]]' -match 1 x 'A' '[[:digit:][:upper:][:space:]]' -match 1 x '1' '[[:digit:][:upper:][:space:]]' -match 0 x '1' '[[:digit:][:upper:][:spaci:]]' -match 1 x ' ' '[[:digit:][:upper:][:space:]]' -match 0 x '.' '[[:digit:][:upper:][:space:]]' -match 1 x '.' '[[:digit:][:punct:][:space:]]' -match 1 x '5' '[[:xdigit:]]' -match 1 x 'f' '[[:xdigit:]]' -match 1 x 'D' '[[:xdigit:]]' -match 1 x '_' '[[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:graph:][:lower:][:print:][:punct:][:space:][:upper:][:xdigit:]]' -match 1 x '.' '[^[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:lower:][:space:][:upper:][:xdigit:]]' -match 1 x '5' '[a-c[:digit:]x-z]' -match 1 x 'b' '[a-c[:digit:]x-z]' -match 1 x 'y' '[a-c[:digit:]x-z]' -match 0 x 'q' '[a-c[:digit:]x-z]' - -# Additional tests, including some malformed wildmats -match 1 x ']' '[\\-^]' -match 0 0 '[' '[\\-^]' -match 1 x '-' '[\-_]' -match 1 x ']' '[\]]' -match 0 0 '\]' '[\]]' -match 0 0 '\' '[\]]' -match 0 0 'ab' 'a[]b' -match 0 x 'a[]b' 'a[]b' -match 0 x 'ab[' 'ab[' -match 0 0 'ab' '[!' -match 0 0 'ab' '[-' -match 1 1 '-' '[-]' -match 0 0 '-' '[a-' -match 0 0 '-' '[!a-' -match 1 x '-' '[--A]' -match 1 x '5' '[--A]' -match 1 1 ' ' '[ --]' -match 1 1 '$' '[ --]' -match 1 1 '-' '[ --]' -match 0 0 '0' '[ --]' -match 1 x '-' '[---]' -match 1 x '-' '[------]' -match 0 0 'j' '[a-e-n]' -match 1 x '-' '[a-e-n]' -match 1 x 'a' '[!------]' -match 0 0 '[' '[]-a]' -match 1 x '^' '[]-a]' -match 0 0 '^' '[!]-a]' -match 1 x '[' '[!]-a]' -match 1 1 '^' '[a^bc]' -match 1 x '-b]' '[a-]b]' -match 0 0 '\' '[\]' -match 1 1 '\' '[\\]' -match 0 0 '\' '[!\\]' -match 1 1 'G' '[A-\\]' -match 0 0 'aaabbb' 'b*a' -match 0 0 'aabcaa' '*ba*' -match 1 1 ',' '[,]' -match 1 1 ',' '[\\,]' -match 1 1 '\' '[\\,]' -match 1 1 '-' '[,-.]' -match 0 0 '+' '[,-.]' -match 0 0 '-.]' '[,-.]' -match 1 1 '2' '[\1-\3]' -match 1 1 '3' '[\1-\3]' -match 0 0 '4' '[\1-\3]' -match 1 1 '\' '[[-\]]' -match 1 1 '[' '[[-\]]' -match 1 1 ']' '[[-\]]' -match 0 0 '-' '[[-\]]' +match 1 1 1 1 'a1B' '[[:alpha:]][[:digit:]][[:upper:]]' +match 0 1 0 1 'a' '[[:digit:][:upper:][:space:]]' +match 1 1 1 1 'A' '[[:digit:][:upper:][:space:]]' +match 1 1 1 1 '1' '[[:digit:][:upper:][:space:]]' +match 0 0 0 0 '1' '[[:digit:][:upper:][:spaci:]]' +match 1 1 1 1 ' ' '[[:digit:][:upper:][:space:]]' +match 0 0 0 0 '.' '[[:digit:][:upper:][:space:]]' +match 1 1 1 1 '.' '[[:digit:][:punct:][:space:]]' +match 1 1 1 1 '5' '[[:xdigit:]]' +match 1 1 1 1 'f' '[[:xdigit:]]' +match 1 1 1 1 'D' '[[:xdigit:]]' +match 1 1 1 1 '_' '[[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:graph:][:lower:][:print:][:punct:][:space:][:upper:][:xdigit:]]' +match 1 1 1 1 '.' '[^[:alnum:][:alpha:][:blank:][:cntrl:][:digit:][:lower:][:space:][:upper:][:xdigit:]]' +match 1 1 1 1 '5' '[a-c[:digit:]x-z]' +match 1 1 1 1 'b' '[a-c[:digit:]x-z]' +match 1 1 1 1 'y' '[a-c[:digit:]x-z]' +match 0 0 0 0 'q' '[a-c[:digit:]x-z]' -# Test recursion and the abort code (use "wildtest -i" to see iteration counts) -match 1 1 '-adobe-courier-bold-o-normal--12-120-75-75-m-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' -match 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-X-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' -match 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-/-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' -match 1 1 'XXX/adobe/courier/bold/o/normal//12/120/75/75/m/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' -match 0 0 'XXX/adobe/courier/bold/o/normal//12/120/75/75/X/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' -match 1 0 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txt' '**/*a*b*g*n*t' -match 0 0 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txtz' '**/*a*b*g*n*t' -match 0 x foo '*/*/*' -match 0 x foo/bar '*/*/*' -match 1 x foo/bba/arr '*/*/*' -match 0 x foo/bb/aa/rr '*/*/*' -match 1 x foo/bb/aa/rr '**/**/**' -match 1 x abcXdefXghi '*X*i' -match 0 x ab/cXd/efXg/hi '*X*i' -match 1 x ab/cXd/efXg/hi '*/*X*/*/*i' -match 1 x ab/cXd/efXg/hi '**/*X*/**/*i' +# Additional tests, including some malformed wildmatch patterns +match 1 1 1 1 ']' '[\\-^]' +match 0 0 0 0 '[' '[\\-^]' +match 1 1 1 1 '-' '[\-_]' +match 1 1 1 1 ']' '[\]]' +match 0 0 0 0 '\]' '[\]]' +match 0 0 0 0 '\' '[\]]' +match 0 0 0 0 'ab' 'a[]b' +match 0 0 0 0 \ + 1 1 1 1 'a[]b' 'a[]b' +match 0 0 0 0 \ + 1 1 1 1 'ab[' 'ab[' +match 0 0 0 0 'ab' '[!' +match 0 0 0 0 'ab' '[-' +match 1 1 1 1 '-' '[-]' +match 0 0 0 0 '-' '[a-' +match 0 0 0 0 '-' '[!a-' +match 1 1 1 1 '-' '[--A]' +match 1 1 1 1 '5' '[--A]' +match 1 1 1 1 ' ' '[ --]' +match 1 1 1 1 '$' '[ --]' +match 1 1 1 1 '-' '[ --]' +match 0 0 0 0 '0' '[ --]' +match 1 1 1 1 '-' '[---]' +match 1 1 1 1 '-' '[------]' +match 0 0 0 0 'j' '[a-e-n]' +match 1 1 1 1 '-' '[a-e-n]' +match 1 1 1 1 'a' '[!------]' +match 0 0 0 0 '[' '[]-a]' +match 1 1 1 1 '^' '[]-a]' +match 0 0 0 0 '^' '[!]-a]' +match 1 1 1 1 '[' '[!]-a]' +match 1 1 1 1 '^' '[a^bc]' +match 1 1 1 1 '-b]' '[a-]b]' +match 0 0 0 0 '\' '[\]' +match 1 1 1 1 '\' '[\\]' +match 0 0 0 0 '\' '[!\\]' +match 1 1 1 1 'G' '[A-\\]' +match 0 0 0 0 'aaabbb' 'b*a' +match 0 0 0 0 'aabcaa' '*ba*' +match 1 1 1 1 ',' '[,]' +match 1 1 1 1 ',' '[\\,]' +match 1 1 1 1 '\' '[\\,]' +match 1 1 1 1 '-' '[,-.]' +match 0 0 0 0 '+' '[,-.]' +match 0 0 0 0 '-.]' '[,-.]' +match 1 1 1 1 '2' '[\1-\3]' +match 1 1 1 1 '3' '[\1-\3]' +match 0 0 0 0 '4' '[\1-\3]' +match 1 1 1 1 '\' '[[-\]]' +match 1 1 1 1 '[' '[[-\]]' +match 1 1 1 1 ']' '[[-\]]' +match 0 0 0 0 '-' '[[-\]]' -pathmatch 1 foo foo -pathmatch 0 foo fo -pathmatch 1 foo/bar foo/bar -pathmatch 1 foo/bar 'foo/*' -pathmatch 1 foo/bba/arr 'foo/*' -pathmatch 1 foo/bba/arr 'foo/**' -pathmatch 1 foo/bba/arr 'foo*' -pathmatch 1 foo/bba/arr 'foo**' -pathmatch 1 foo/bba/arr 'foo/*arr' -pathmatch 1 foo/bba/arr 'foo/**arr' -pathmatch 0 foo/bba/arr 'foo/*z' -pathmatch 0 foo/bba/arr 'foo/**z' -pathmatch 1 foo/bar 'foo?bar' -pathmatch 1 foo/bar 'foo[/]bar' -pathmatch 1 foo/bar 'foo[^a-z]bar' -pathmatch 0 foo '*/*/*' -pathmatch 0 foo/bar '*/*/*' -pathmatch 1 foo/bba/arr '*/*/*' -pathmatch 1 foo/bb/aa/rr '*/*/*' -pathmatch 1 abcXdefXghi '*X*i' -pathmatch 1 ab/cXd/efXg/hi '*/*X*/*/*i' -pathmatch 1 ab/cXd/efXg/hi '*Xg*i' +# Test recursion +match 1 1 1 1 '-adobe-courier-bold-o-normal--12-120-75-75-m-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' +match 0 0 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-X-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' +match 0 0 0 0 '-adobe-courier-bold-o-normal--12-120-75-75-/-70-iso8859-1' '-*-*-*-*-*-*-12-*-*-*-m-*-*-*' +match 1 1 1 1 'XXX/adobe/courier/bold/o/normal//12/120/75/75/m/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' +match 0 0 0 0 'XXX/adobe/courier/bold/o/normal//12/120/75/75/X/70/iso8859/1' 'XXX/*/*/*/*/*/*/12/*/*/*/m/*/*/*' +match 1 1 1 1 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txt' '**/*a*b*g*n*t' +match 0 0 0 0 'abcd/abcdefg/abcdefghijk/abcdefghijklmnop.txtz' '**/*a*b*g*n*t' +match 0 0 0 0 foo '*/*/*' +match 0 0 0 0 foo/bar '*/*/*' +match 1 1 1 1 foo/bba/arr '*/*/*' +match 0 0 1 1 foo/bb/aa/rr '*/*/*' +match 1 1 1 1 foo/bb/aa/rr '**/**/**' +match 1 1 1 1 abcXdefXghi '*X*i' +match 0 0 1 1 ab/cXd/efXg/hi '*X*i' +match 1 1 1 1 ab/cXd/efXg/hi '*/*X*/*/*i' +match 1 1 1 1 ab/cXd/efXg/hi '**/*X*/**/*i' -# Case-sensitivity features -match 0 x 'a' '[A-Z]' -match 1 x 'A' '[A-Z]' -match 0 x 'A' '[a-z]' -match 1 x 'a' '[a-z]' -match 0 x 'a' '[[:upper:]]' -match 1 x 'A' '[[:upper:]]' -match 0 x 'A' '[[:lower:]]' -match 1 x 'a' '[[:lower:]]' -match 0 x 'A' '[B-Za]' -match 1 x 'a' '[B-Za]' -match 0 x 'A' '[B-a]' -match 1 x 'a' '[B-a]' -match 0 x 'z' '[Z-y]' -match 1 x 'Z' '[Z-y]' +# Extra pathmatch tests +match 0 0 0 0 foo fo +match 1 1 1 1 foo/bar foo/bar +match 1 1 1 1 foo/bar 'foo/*' +match 0 0 1 1 foo/bba/arr 'foo/*' +match 1 1 1 1 foo/bba/arr 'foo/**' +match 0 0 1 1 foo/bba/arr 'foo*' +match 0 0 1 1 \ + 1 1 1 1 foo/bba/arr 'foo**' +match 0 0 1 1 foo/bba/arr 'foo/*arr' +match 0 0 1 1 foo/bba/arr 'foo/**arr' +match 0 0 0 0 foo/bba/arr 'foo/*z' +match 0 0 0 0 foo/bba/arr 'foo/**z' +match 0 0 1 1 foo/bar 'foo?bar' +match 0 0 1 1 foo/bar 'foo[/]bar' +match 0 0 1 1 foo/bar 'foo[^a-z]bar' +match 0 0 1 1 ab/cXd/efXg/hi '*Xg*i' -imatch 1 'a' '[A-Z]' -imatch 1 'A' '[A-Z]' -imatch 1 'A' '[a-z]' -imatch 1 'a' '[a-z]' -imatch 1 'a' '[[:upper:]]' -imatch 1 'A' '[[:upper:]]' -imatch 1 'A' '[[:lower:]]' -imatch 1 'a' '[[:lower:]]' -imatch 1 'A' '[B-Za]' -imatch 1 'a' '[B-Za]' -imatch 1 'A' '[B-a]' -imatch 1 'a' '[B-a]' -imatch 1 'z' '[Z-y]' -imatch 1 'Z' '[Z-y]' +# Extra case-sensitivity tests +match 0 1 0 1 'a' '[A-Z]' +match 1 1 1 1 'A' '[A-Z]' +match 0 1 0 1 'A' '[a-z]' +match 1 1 1 1 'a' '[a-z]' +match 0 1 0 1 'a' '[[:upper:]]' +match 1 1 1 1 'A' '[[:upper:]]' +match 0 1 0 1 'A' '[[:lower:]]' +match 1 1 1 1 'a' '[[:lower:]]' +match 0 1 0 1 'A' '[B-Za]' +match 1 1 1 1 'a' '[B-Za]' +match 0 1 0 1 'A' '[B-a]' +match 1 1 1 1 'a' '[B-a]' +match 0 1 0 1 'z' '[Z-y]' +match 1 1 1 1 'Z' '[Z-y]' test_done diff --git a/t/t3100-ls-tree-restrict.sh b/t/t3100-ls-tree-restrict.sh index 325114f8fe..18baf49a49 100755 --- a/t/t3100-ls-tree-restrict.sh +++ b/t/t3100-ls-tree-restrict.sh @@ -32,7 +32,7 @@ test_expect_success \ echo $tree' test_output () { - sed -e "s/ $_x40 / X /" <current >check + sed -e "s/ $OID_REGEX / X /" <current >check test_cmp expected check } diff --git a/t/t3101-ls-tree-dirname.sh b/t/t3101-ls-tree-dirname.sh index 327ded4000..12bf31022a 100755 --- a/t/t3101-ls-tree-dirname.sh +++ b/t/t3101-ls-tree-dirname.sh @@ -40,7 +40,7 @@ test_expect_success 'setup' ' ' test_output () { - sed -e "s/ $_x40 / X /" <current >check && + sed -e "s/ $OID_REGEX / X /" <current >check && test_cmp expected check } diff --git a/t/t3103-ls-tree-misc.sh b/t/t3103-ls-tree-misc.sh index 09dcf043fd..14520913af 100755 --- a/t/t3103-ls-tree-misc.sh +++ b/t/t3103-ls-tree-misc.sh @@ -17,7 +17,8 @@ test_expect_success 'setup' ' ' test_expect_success 'ls-tree fails with non-zero exit code on broken tree' ' - rm -f .git/objects/5f/cffbd6e4c5c5b8d81f5e9314b20e338e3ffff5 && + tree=$(git rev-parse HEAD:a) && + rm -f .git/objects/$(echo $tree | sed -e "s,^\(..\),\1/,") && test_must_fail git ls-tree -r HEAD ' diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 503a88d029..dbca665da4 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -6,6 +6,7 @@ test_description='git branch assorted tests' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh test_expect_success 'prepare a trivial repository' ' echo Hello >A && @@ -46,11 +47,11 @@ test_expect_success 'git branch HEAD should fail' ' ' cat >expect <<EOF -$_z40 $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master +$ZERO_OID $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master EOF -test_expect_success 'git branch -l d/e/f should create a branch and a log' ' +test_expect_success 'git branch --create-reflog d/e/f should create a branch and a log' ' GIT_COMMITTER_DATE="2005-05-26 23:30" \ - git branch -l d/e/f && + git -c core.logallrefupdates=false branch --create-reflog d/e/f && test_path_is_file .git/refs/heads/d/e/f && test_path_is_file .git/logs/refs/heads/d/e/f && test_cmp expect .git/logs/refs/heads/d/e/f @@ -81,7 +82,7 @@ test_expect_success 'git branch -m dumps usage' ' test_expect_success 'git branch -m m broken_symref should work' ' test_when_finished "git branch -D broken_symref" && - git branch -l m && + git branch --create-reflog m && git symbolic-ref refs/heads/broken_symref refs/heads/i_am_broken && git branch -m m broken_symref && git reflog exists refs/heads/broken_symref && @@ -89,13 +90,13 @@ test_expect_success 'git branch -m m broken_symref should work' ' ' test_expect_success 'git branch -m m m/m should work' ' - git branch -l m && + git branch --create-reflog m && git branch -m m m/m && git reflog exists refs/heads/m/m ' test_expect_success 'git branch -m n/n n should work' ' - git branch -l n/n && + git branch --create-reflog n/n && git branch -m n/n n && git reflog exists refs/heads/n ' @@ -233,34 +234,34 @@ test_expect_success 'git branch -M master2 master2 should work when master is ch test_expect_success 'git branch -v -d t should work' ' git branch t && - test_path_is_file .git/refs/heads/t && + git rev-parse --verify refs/heads/t && git branch -v -d t && - test_path_is_missing .git/refs/heads/t + test_must_fail git rev-parse --verify refs/heads/t ' test_expect_success 'git branch -v -m t s should work' ' git branch t && - test_path_is_file .git/refs/heads/t && + git rev-parse --verify refs/heads/t && git branch -v -m t s && - test_path_is_missing .git/refs/heads/t && - test_path_is_file .git/refs/heads/s && + test_must_fail git rev-parse --verify refs/heads/t && + git rev-parse --verify refs/heads/s && git branch -d s ' test_expect_success 'git branch -m -d t s should fail' ' git branch t && - test_path_is_file .git/refs/heads/t && + git rev-parse refs/heads/t && test_must_fail git branch -m -d t s && git branch -d t && - test_path_is_missing .git/refs/heads/t + test_must_fail git rev-parse refs/heads/t ' test_expect_success 'git branch --list -d t should fail' ' git branch t && - test_path_is_file .git/refs/heads/t && + git rev-parse refs/heads/t && test_must_fail git branch --list -d t && git branch -d t && - test_path_is_missing .git/refs/heads/t + test_must_fail git rev-parse refs/heads/t ' test_expect_success 'git branch --list -v with --abbrev' ' @@ -377,9 +378,9 @@ mv .git/config-saved .git/config git config branch.s/s.dummy Hello test_expect_success 'git branch -m s/s s should work when s/t is deleted' ' - git branch -l s/s && + git branch --create-reflog s/s && git reflog exists refs/heads/s/s && - git branch -l s/t && + git branch --create-reflog s/t && git reflog exists refs/heads/s/t && git branch -d s/t && git branch -m s/s s && @@ -443,7 +444,7 @@ test_expect_success 'git branch --copy dumps usage' ' ' test_expect_success 'git branch -c d e should work' ' - git branch -l d && + git branch --create-reflog d && git reflog exists refs/heads/d && git config branch.d.dummy Hello && git branch -c d e && @@ -458,7 +459,7 @@ test_expect_success 'git branch -c d e should work' ' ' test_expect_success 'git branch --copy is a synonym for -c' ' - git branch -l copy && + git branch --create-reflog copy && git reflog exists refs/heads/copy && git config branch.copy.dummy Hello && git branch --copy copy copy-to && @@ -485,7 +486,7 @@ test_expect_success 'git branch -c ee ef should copy ee to create branch ef' ' ' test_expect_success 'git branch -c f/f g/g should work' ' - git branch -l f/f && + git branch --create-reflog f/f && git reflog exists refs/heads/f/f && git config branch.f/f.dummy Hello && git branch -c f/f g/g && @@ -496,7 +497,7 @@ test_expect_success 'git branch -c f/f g/g should work' ' ' test_expect_success 'git branch -c m2 m2 should work' ' - git branch -l m2 && + git branch --create-reflog m2 && git reflog exists refs/heads/m2 && git config branch.m2.dummy Hello && git branch -c m2 m2 && @@ -505,18 +506,18 @@ test_expect_success 'git branch -c m2 m2 should work' ' ' test_expect_success 'git branch -c zz zz/zz should fail' ' - git branch -l zz && + git branch --create-reflog zz && git reflog exists refs/heads/zz && test_must_fail git branch -c zz zz/zz ' test_expect_success 'git branch -c b/b b should fail' ' - git branch -l b/b && + git branch --create-reflog b/b && test_must_fail git branch -c b/b b ' test_expect_success 'git branch -C o/q o/p should work when o/p exists' ' - git branch -l o/q && + git branch --create-reflog o/q && git reflog exists refs/heads/o/q && git reflog exists refs/heads/o/p && git branch -C o/q o/p @@ -528,7 +529,7 @@ test_expect_success 'git branch -c -f o/q o/p should work when o/p exists' ' git branch -c -f o/q o/p ' -test_expect_success 'git branch -c qq rr/qq should fail when r exists' ' +test_expect_success 'git branch -c qq rr/qq should fail when rr exists' ' git branch qq && git branch rr && test_must_fail git branch -c qq rr/qq @@ -569,10 +570,10 @@ test_expect_success 'git branch -C master5 master5 should work when master is ch ' test_expect_success 'git branch -C ab cd should overwrite existing config for cd' ' - git branch -l cd && + git branch --create-reflog cd && git reflog exists refs/heads/cd && git config branch.cd.dummy CD && - git branch -l ab && + git branch --create-reflog ab && git reflog exists refs/heads/ab && git config branch.ab.dummy AB && git branch -C ab cd && @@ -684,7 +685,7 @@ test_expect_success 'renaming a symref is not allowed' ' ' test_expect_success SYMLINKS 'git branch -m u v should fail when the reflog for u is a symlink' ' - git branch -l u && + git branch --create-reflog u && mv .git/logs/refs/heads/u real-u && ln -s real-u .git/logs/refs/heads/u && test_must_fail git branch -m u v @@ -884,7 +885,7 @@ test_expect_success 'test --unset-upstream on a particular branch' ' test_must_fail git config branch.my14.merge ' -test_expect_success '--set-upstream fails' ' +test_expect_success 'disabled option --set-upstream fails' ' test_must_fail git branch --set-upstream origin/master ' @@ -900,7 +901,7 @@ test_expect_success '--set-upstream-to notices an error to set branch as own ups # Keep this test last, as it changes the current branch cat >expect <<EOF -$_z40 $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master +$ZERO_OID $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master EOF test_expect_success 'git checkout -b g/h/i -l should create a branch and a log' ' GIT_COMMITTER_DATE="2005-05-26 23:30" \ @@ -1246,6 +1247,29 @@ test_expect_success '--merged is incompatible with --no-merged' ' test_must_fail git branch --merged HEAD --no-merged HEAD ' +test_expect_success '--list during rebase' ' + test_when_finished "reset_rebase" && + git checkout master && + FAKE_LINES="1 edit 2" && + export FAKE_LINES && + set_fake_editor && + git rebase -i HEAD~2 && + git branch --list >actual && + test_i18ngrep "rebasing master" actual +' + +test_expect_success '--list during rebase from detached HEAD' ' + test_when_finished "reset_rebase && git checkout master" && + git checkout master^0 && + oid=$(git rev-parse --short HEAD) && + FAKE_LINES="1 edit 2" && + export FAKE_LINES && + set_fake_editor && + git rebase -i HEAD~2 && + git branch --list >actual && + test_i18ngrep "rebasing detached HEAD $oid" actual +' + test_expect_success 'tracking with unexpected .fetch refspec' ' rm -rf a b c d && git init a && diff --git a/t/t3306-notes-prune.sh b/t/t3306-notes-prune.sh index 86bf909ee3..61748088eb 100755 --- a/t/t3306-notes-prune.sh +++ b/t/t3306-notes-prune.sh @@ -22,7 +22,7 @@ test_expect_success 'setup: create a few commits with notes' ' git commit -m 3rd && COMMIT_FILE=.git/objects/5e/e1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && test -f $COMMIT_FILE && - test-chmtime =+0 $COMMIT_FILE && + test-tool chmtime =+0 $COMMIT_FILE && git notes add -m "Note #3" ' diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 8ac58d5ea5..72d9564747 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -277,4 +277,38 @@ EOF test_cmp From_.msg out ' +test_expect_success 'rebase--am.sh and --show-current-patch' ' + test_create_repo conflict-apply && + ( + cd conflict-apply && + test_commit init && + echo one >>init.t && + git commit -a -m one && + echo two >>init.t && + git commit -a -m two && + git tag two && + test_must_fail git rebase --onto init HEAD^ && + GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && + grep "show.*$(git rev-parse two)" stderr + ) +' + +test_expect_success 'rebase--merge.sh and --show-current-patch' ' + test_create_repo conflict-merge && + ( + cd conflict-merge && + test_commit init && + echo one >>init.t && + git commit -a -m one && + echo two >>init.t && + git commit -a -m two && + git tag two && + test_must_fail git rebase --merge --onto init HEAD^ && + git rebase --show-current-patch >actual.patch && + GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && + grep "show.*REBASE_HEAD" stderr && + test "$(git rev-parse REBASE_HEAD)" = "$(git rev-parse two)" + ) +' + test_done diff --git a/t/t3401-rebase-and-am-rename.sh b/t/t3401-rebase-and-am-rename.sh new file mode 100755 index 0000000000..8f832957fc --- /dev/null +++ b/t/t3401-rebase-and-am-rename.sh @@ -0,0 +1,105 @@ +#!/bin/sh + +test_description='git rebase + directory rename tests' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + +test_expect_success 'setup testcase' ' + test_create_repo dir-rename && + ( + cd dir-rename && + + mkdir x && + test_seq 1 10 >x/a && + test_seq 11 20 >x/b && + test_seq 21 30 >x/c && + test_write_lines a b c d e f g h i >l && + git add x l && + git commit -m "Initial" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x y && + git mv l letters && + git commit -m "Rename x to y, l to letters" && + + git checkout B && + echo j >>l && + test_seq 31 40 >x/d && + git add l x/d && + git commit -m "Modify l, add x/d" + ) +' + +test_expect_success 'rebase --interactive: directory rename detected' ' + ( + cd dir-rename && + + git checkout B^0 && + + set_fake_editor && + FAKE_LINES="1" git rebase --interactive A && + + git ls-files -s >out && + test_line_count = 5 out && + + test_path_is_file y/d && + test_path_is_missing x/d + ) +' + +test_expect_failure 'rebase (am): directory rename detected' ' + ( + cd dir-rename && + + git checkout B^0 && + + git rebase A && + + git ls-files -s >out && + test_line_count = 5 out && + + test_path_is_file y/d && + test_path_is_missing x/d + ) +' + +test_expect_success 'rebase --merge: directory rename detected' ' + ( + cd dir-rename && + + git checkout B^0 && + + git rebase --merge A && + + git ls-files -s >out && + test_line_count = 5 out && + + test_path_is_file y/d && + test_path_is_missing x/d + ) +' + +test_expect_failure 'am: directory rename detected' ' + ( + cd dir-rename && + + git checkout A^0 && + + git format-patch -1 B && + + git am --3way 0001*.patch && + + git ls-files -s >out && + test_line_count = 5 out && + + test_path_is_file y/d && + test_path_is_missing x/d + ) +' + +test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 481a350090..01616901bd 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -225,6 +225,14 @@ test_expect_success 'stop on conflicting pick' ' test 0 = $(grep -c "^[^#]" < .git/rebase-merge/git-rebase-todo) ' +test_expect_success 'show conflicted patch' ' + GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && + grep "show.*REBASE_HEAD" stderr && + # the original stopped-sha1 is abbreviated + stopped_sha1="$(git rev-parse $(cat ".git/rebase-merge/stopped-sha"))" && + test "$(git rev-parse REBASE_HEAD)" = "$stopped_sha1" +' + test_expect_success 'abort' ' git rebase --abort && test $(git rev-parse new-branch1) = $(git rev-parse HEAD) && @@ -256,11 +264,18 @@ test_expect_success 'retain authorship' ' ' test_expect_success 'retain authorship w/ conflicts' ' + oGIT_AUTHOR_NAME=$GIT_AUTHOR_NAME && + test_when_finished "GIT_AUTHOR_NAME=\$oGIT_AUTHOR_NAME" && + git reset --hard twerp && test_commit a conflict a conflict-a && git reset --hard twerp && - GIT_AUTHOR_NAME=AttributeMe \ + + GIT_AUTHOR_NAME=AttributeMe && + export GIT_AUTHOR_NAME && test_commit b conflict b conflict-b && + GIT_AUTHOR_NAME=$oGIT_AUTHOR_NAME && + set_fake_editor && test_must_fail git rebase -i conflict-a && echo resolved >conflict && @@ -453,6 +468,10 @@ test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messa git rebase -i $base && git cat-file commit HEAD | sed -e 1,/^\$/d > actual-squash-fixup && test_cmp expect-squash-fixup actual-squash-fixup && + git cat-file commit HEAD@{2} | + grep "^# This is a combination of 3 commits\." && + git cat-file commit HEAD@{3} | + grep "^# This is a combination of 2 commits\." && git checkout to-be-rebased && git branch -D squash-fixup ' @@ -541,15 +560,16 @@ test_expect_success '--continue tries to commit, even for "edit"' ' ' test_expect_success 'aborted --continue does not squash commits after "edit"' ' + test_when_finished "git rebase --abort" && old=$(git rev-parse HEAD) && test_tick && set_fake_editor && FAKE_LINES="edit 1" git rebase -i HEAD^ && echo "edited again" > file7 && git add file7 && - test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue && - test $old = $(git rev-parse HEAD) && - git rebase --abort + echo all the things >>conflict && + test_must_fail git rebase --continue && + test $old = $(git rev-parse HEAD) ' test_expect_success 'auto-amend only edited commits after "edit"' ' @@ -699,13 +719,13 @@ test_expect_success 'rebase -i continue with unstaged submodule' ' test_expect_success 'avoid unnecessary reset' ' git checkout master && git reset --hard && - test-chmtime =123456789 file3 && + test-tool chmtime =123456789 file3 && git update-index --refresh && HEAD=$(git rev-parse HEAD) && set_fake_editor && git rebase -i HEAD~4 && test $HEAD = $(git rev-parse HEAD) && - MTIME=$(test-chmtime -v +0 file3 | sed 's/[^0-9].*$//') && + MTIME=$(test-tool chmtime --get file3) && test 123456789 = $MTIME ' @@ -915,10 +935,8 @@ test_expect_success 'rebase --exec works without -i ' ' test_expect_success 'rebase -i --exec without <CMD>' ' git reset --hard execute && set_fake_editor && - test_must_fail git rebase -i --exec 2>tmp && - sed -e "1d" tmp >actual && - test_must_fail git rebase -h >expected && - test_cmp expected actual && + test_must_fail git rebase -i --exec 2>actual && + test_i18ngrep "requires a value" actual && git checkout master ' @@ -961,7 +979,45 @@ test_expect_success 'rebase -i --root fixup root commit' ' test 0 = $(git cat-file commit HEAD | grep -c ^parent\ ) ' +test_expect_success 'rebase -i --root reword root commit' ' + test_when_finished "test_might_fail git rebase --abort" && + git checkout -b reword-root-branch master && + set_fake_editor && + FAKE_LINES="reword 1 2" FAKE_COMMIT_MESSAGE="A changed" \ + git rebase -i --root && + git show HEAD^ | grep "A changed" && + test -z "$(git show -s --format=%p HEAD^)" +' + +test_expect_success 'rebase -i --root when root has untracked file confilct' ' + test_when_finished "reset_rebase" && + git checkout -b failing-root-pick A && + echo x >file2 && + git rm file1 && + git commit -m "remove file 1 add file 2" && + echo z >file1 && + set_fake_editor && + test_must_fail env FAKE_LINES="1 2" git rebase -i --root && + rm file1 && + git rebase --continue && + test "$(git log -1 --format=%B)" = "remove file 1 add file 2" && + test "$(git rev-list --count HEAD)" = 2 +' + +test_expect_success 'rebase -i --root reword root when root has untracked file conflict' ' + test_when_finished "reset_rebase" && + echo z>file1 && + set_fake_editor && + test_must_fail env FAKE_LINES="reword 1 2" \ + FAKE_COMMIT_MESSAGE="Modified A" git rebase -i --root && + rm file1 && + FAKE_COMMIT_MESSAGE="Reworded A" git rebase --continue && + test "$(git log -1 --format=%B HEAD^)" = "Reworded A" && + test "$(git rev-list --count HEAD)" = 2 +' + test_expect_success C_LOCALE_OUTPUT 'rebase --edit-todo does not work on non-interactive rebase' ' + git checkout reword-root-branch && git reset --hard && git checkout conflict-branch && set_fake_editor && @@ -1194,10 +1250,6 @@ test_expect_success 'drop' ' test A = $(git cat-file commit HEAD^^ | sed -ne \$p) ' -cat >expect <<EOF -Successfully rebased and updated refs/heads/missing-commit. -EOF - test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' test_config rebase.missingCommitsCheck ignore && rebase_setup_and_clean missing-commit && @@ -1205,7 +1257,9 @@ test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' FAKE_LINES="1 2 3 4" \ git rebase -i --root 2>actual && test D = $(git cat-file commit HEAD | sed -ne \$p) && - test_i18ncmp expect actual + test_i18ngrep \ + "Successfully rebased and updated refs/heads/missing-commit" \ + actual ' cat >expect <<EOF @@ -1217,15 +1271,24 @@ To avoid this message, use "drop" to explicitly remove a commit. Use 'git config rebase.missingCommitsCheck' to change the level of warnings. The possible behaviours are: ignore, warn, error. +Rebasing (1/4) +Rebasing (2/4) +Rebasing (3/4) +Rebasing (4/4) Successfully rebased and updated refs/heads/missing-commit. EOF +cr_to_nl () { + tr '\015' '\012' +} + test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' ' test_config rebase.missingCommitsCheck warn && rebase_setup_and_clean missing-commit && set_fake_editor && FAKE_LINES="1 2 3 4" \ - git rebase -i --root 2>actual && + git rebase -i --root 2>actual.2 && + cr_to_nl <actual.2 >actual && test_i18ncmp expect actual && test D = $(git cat-file commit HEAD | sed -ne \$p) ' @@ -1336,6 +1399,16 @@ test_expect_success 'editor saves as CR/LF' ' SQ="'" test_expect_success 'rebase -i --gpg-sign=<key-id>' ' + test_when_finished "test_might_fail git rebase --abort" && + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ + >out 2>err && + test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err +' + +test_expect_success 'rebase -i --gpg-sign=<key-id> overrides commit.gpgSign' ' + test_when_finished "test_might_fail git rebase --abort" && + test_config commit.gpgsign true && set_fake_editor && FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ >out 2>err && diff --git a/t/t3405-rebase-malformed.sh b/t/t3405-rebase-malformed.sh index ff8c360cd5..da94dddc86 100755 --- a/t/t3405-rebase-malformed.sh +++ b/t/t3405-rebase-malformed.sh @@ -3,6 +3,7 @@ test_description='rebase should handle arbitrary git message' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh cat >F <<\EOF This is an example of a commit log message @@ -25,6 +26,7 @@ test_expect_success setup ' test_tick && git commit -m "Initial commit" && git branch diff-in-message && + git branch empty-message-merge && git checkout -b multi-line-subject && cat F >file2 && @@ -45,6 +47,11 @@ test_expect_success setup ' git cat-file commit HEAD | sed -e "1,/^\$/d" >G0 && + git checkout empty-message-merge && + echo file3 >file3 && + git add file3 && + git commit --allow-empty-message -m "" && + git checkout master && echo One >file1 && @@ -69,4 +76,15 @@ test_expect_success 'rebase commit with diff in message' ' test_cmp G G0 ' +test_expect_success 'rebase -m commit with empty message' ' + git rebase -m master empty-message-merge +' + +test_expect_success 'rebase -i commit with empty message' ' + git checkout diff-in-message && + set_fake_editor && + env FAKE_COMMIT_MESSAGE=" " FAKE_LINES="reword 1" \ + git rebase -i HEAD^ +' + test_done diff --git a/t/t3408-rebase-multi-line.sh b/t/t3408-rebase-multi-line.sh index 6b84e6042a..e7292f5b9b 100755 --- a/t/t3408-rebase-multi-line.sh +++ b/t/t3408-rebase-multi-line.sh @@ -24,8 +24,23 @@ But otherwise with a sane description." && >elif && git add elif && test_tick && - git commit -m second + git commit -m second && + git checkout -b side2 && + >afile && + git add afile && + test_tick && + git commit -m third && + echo hello >afile && + test_tick && + git commit -a -m fourth && + git checkout -b side-merge && + git reset --hard HEAD^^ && + git merge --no-ff -m "A merge commit log message that has a long +summary that spills over multiple lines. + +But otherwise with a sane description." side2 && + git branch side-merge-original ' test_expect_success rebase ' @@ -37,5 +52,14 @@ test_expect_success rebase ' test_cmp expect actual ' +test_expect_success rebasep ' + + git checkout side-merge && + git rebase -p side && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + git cat-file commit side-merge-original | sed -e "1,/^\$/d" >expect && + test_cmp expect actual + +' test_done diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh index 7c91a85f43..c145dbac38 100755 --- a/t/t3418-rebase-continue.sh +++ b/t/t3418-rebase-continue.sh @@ -24,7 +24,7 @@ test_expect_success 'interactive rebase --continue works with touched file' ' git checkout master && FAKE_LINES="edit 1" git rebase -i HEAD^ && - test-chmtime =-60 F1 && + test-tool chmtime =-60 F1 && git rebase --continue ' @@ -36,7 +36,7 @@ test_expect_success 'non-interactive rebase --continue works with touched file' test_must_fail git rebase --onto master master topic && echo "Resolved" >F2 && git add F2 && - test-chmtime =-60 F1 && + test-tool chmtime =-60 F1 && git rebase --continue ' @@ -74,6 +74,38 @@ test_expect_success 'rebase --continue remembers merge strategy and options' ' test -f funny.was.run ' +test_expect_success 'rebase -i --continue handles merge strategy and options' ' + rm -fr .git/rebase-* && + git reset --hard commit-new-file-F2-on-topic-branch && + test_commit "commit-new-file-F3-on-topic-branch-for-dash-i" F3 32 && + test_when_finished "rm -fr test-bin funny.was.run funny.args" && + mkdir test-bin && + cat >test-bin/git-merge-funny <<-EOF && + #!$SHELL_PATH + echo "\$@" >>funny.args + case "\$1" in --opt) ;; *) exit 2 ;; esac + case "\$2" in --foo) ;; *) exit 2 ;; esac + case "\$4" in --) ;; *) exit 2 ;; esac + shift 2 && + >funny.was.run && + exec git merge-recursive "\$@" + EOF + chmod +x test-bin/git-merge-funny && + ( + PATH=./test-bin:$PATH && + test_must_fail git rebase -i -s funny -Xopt -Xfoo master topic + ) && + test -f funny.was.run && + rm funny.was.run && + echo "Resolved" >F2 && + git add F2 && + ( + PATH=./test-bin:$PATH && + git rebase --continue + ) && + test -f funny.was.run +' + test_expect_success 'rebase passes merge strategy options correctly' ' rm -fr .git/rebase-* && git reset --hard commit-new-file-F3-on-topic-branch && @@ -88,6 +120,55 @@ test_expect_success 'rebase passes merge strategy options correctly' ' git rebase --continue ' +test_expect_success '--skip after failed fixup cleans commit message' ' + test_when_finished "test_might_fail git rebase --abort" && + git checkout -b with-conflicting-fixup && + test_commit wants-fixup && + test_commit "fixup! wants-fixup" wants-fixup.t 1 wants-fixup-1 && + test_commit "fixup! wants-fixup" wants-fixup.t 2 wants-fixup-2 && + test_commit "fixup! wants-fixup" wants-fixup.t 3 wants-fixup-3 && + test_must_fail env FAKE_LINES="1 fixup 2 squash 4" \ + git rebase -i HEAD~4 && + + : now there is a conflict, and comments in the commit message && + git show HEAD >out && + grep "fixup! wants-fixup" out && + + : skip and continue && + echo "cp \"\$1\" .git/copy.txt" | write_script copy-editor.sh && + (test_set_editor "$PWD/copy-editor.sh" && git rebase --skip) && + + : the user should not have had to edit the commit message && + test_path_is_missing .git/copy.txt && + + : now the comments in the commit message should have been cleaned up && + git show HEAD >out && + ! grep "fixup! wants-fixup" out && + + : now, let us ensure that "squash" is handled correctly && + git reset --hard wants-fixup-3 && + test_must_fail env FAKE_LINES="1 squash 4 squash 2 squash 4" \ + git rebase -i HEAD~4 && + + : the first squash failed, but there are two more in the chain && + (test_set_editor "$PWD/copy-editor.sh" && + test_must_fail git rebase --skip) && + + : not the final squash, no need to edit the commit message && + test_path_is_missing .git/copy.txt && + + : The first squash was skipped, therefore: && + git show HEAD >out && + test_i18ngrep "# This is a combination of 2 commits" out && + + (test_set_editor "$PWD/copy-editor.sh" && git rebase --skip) && + git show HEAD >out && + test_i18ngrep ! "# This is a combination" out && + + : Final squash failed, but there was still a squash && + test_i18ngrep "# This is a combination of 2 commits" .git/copy.txt +' + test_expect_success 'setup rerere database' ' rm -fr .git/rebase-* && git reset --hard commit-new-file-F3-on-topic-branch && diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index 68fe2003ef..99b2aac921 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -199,7 +199,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_run_rebase failure -p @@ -214,9 +214,10 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m -test_run_rebase failure -i +test_run_rebase success -m +test_run_rebase success -i test_run_rebase failure -p +test_run_rebase success --rebase-merges # m # / @@ -327,9 +328,9 @@ test_run_rebase () { test_cmp_rev c HEAD " } -test_run_rebase failure '' -test_run_rebase failure -m -test_run_rebase failure -i +test_run_rebase success '' +test_run_rebase success -m +test_run_rebase success -i test_run_rebase failure -p test_run_rebase () { diff --git a/t/t3422-rebase-incompatible-options.sh b/t/t3422-rebase-incompatible-options.sh new file mode 100755 index 0000000000..bb78a6ec86 --- /dev/null +++ b/t/t3422-rebase-incompatible-options.sh @@ -0,0 +1,88 @@ +#!/bin/sh + +test_description='test if rebase detects and aborts on incompatible options' +. ./test-lib.sh + +test_expect_success 'setup' ' + test_seq 2 9 >foo && + git add foo && + git commit -m orig && + + git branch A && + git branch B && + + git checkout A && + test_seq 1 9 >foo && + git add foo && + git commit -m A && + + git checkout B && + echo "q qfoo();" | q_to_tab >>foo && + git add foo && + git commit -m B +' + +# +# Rebase has lots of useful options like --whitepsace=fix, which are +# actually all built in terms of flags to git-am. Since neither +# --merge nor --interactive (nor any options that imply those two) use +# git-am, using them together will result in flags like --whitespace=fix +# being ignored. Make sure rebase warns the user and aborts instead. +# + +test_rebase_am_only () { + opt=$1 + shift + test_expect_success "$opt incompatible with --merge" " + git checkout B^0 && + test_must_fail git rebase $opt --merge A + " + + test_expect_success "$opt incompatible with --strategy=ours" " + git checkout B^0 && + test_must_fail git rebase $opt --strategy=ours A + " + + test_expect_success "$opt incompatible with --strategy-option=ours" " + git checkout B^0 && + test_must_fail git rebase $opt --strategy-option=ours A + " + + test_expect_success "$opt incompatible with --interactive" " + git checkout B^0 && + test_must_fail git rebase $opt --interactive A + " + + test_expect_success "$opt incompatible with --exec" " + git checkout B^0 && + test_must_fail git rebase $opt --exec 'true' A + " + +} + +test_rebase_am_only --whitespace=fix +test_rebase_am_only --ignore-whitespace +test_rebase_am_only --committer-date-is-author-date +test_rebase_am_only -C4 + +test_expect_success '--preserve-merges incompatible with --signoff' ' + git checkout B^0 && + test_must_fail git rebase --preserve-merges --signoff A +' + +test_expect_success '--preserve-merges incompatible with --rebase-merges' ' + git checkout B^0 && + test_must_fail git rebase --preserve-merges --rebase-merges A +' + +test_expect_success '--rebase-merges incompatible with --strategy' ' + git checkout B^0 && + test_must_fail git rebase --rebase-merges -s resolve A +' + +test_expect_success '--rebase-merges incompatible with --strategy-option' ' + git checkout B^0 && + test_must_fail git rebase --rebase-merges -Xignore-space-change A +' + +test_done diff --git a/t/t3423-rebase-reword.sh b/t/t3423-rebase-reword.sh new file mode 100755 index 0000000000..6963750794 --- /dev/null +++ b/t/t3423-rebase-reword.sh @@ -0,0 +1,48 @@ +#!/bin/sh + +test_description='git rebase interactive with rewording' + +. ./test-lib.sh + +. "$TEST_DIRECTORY"/lib-rebase.sh + +test_expect_success 'setup' ' + test_commit master file-1 test && + + git checkout -b stuff && + + test_commit feature_a file-2 aaa && + test_commit feature_b file-2 ddd +' + +test_expect_success 'reword without issues functions as intended' ' + test_when_finished "reset_rebase" && + + git checkout stuff^0 && + + set_fake_editor && + FAKE_LINES="pick 1 reword 2" FAKE_COMMIT_MESSAGE="feature_b_reworded" \ + git rebase -i -v master && + + test "$(git log -1 --format=%B)" = "feature_b_reworded" && + test $(git rev-list --count HEAD) = 3 +' + +test_expect_success 'reword after a conflict preserves commit' ' + test_when_finished "reset_rebase" && + + git checkout stuff^0 && + + set_fake_editor && + test_must_fail env FAKE_LINES="reword 2" \ + git rebase -i -v master && + + git checkout --theirs file-2 && + git add file-2 && + FAKE_COMMIT_MESSAGE="feature_b_reworded" git rebase --continue && + + test "$(git log -1 --format=%B)" = "feature_b_reworded" && + test $(git rev-list --count HEAD) = 2 +' + +test_done diff --git a/t/t3428-rebase-signoff.sh b/t/t3428-rebase-signoff.sh index 2afb564701..f6993b7e14 100755 --- a/t/t3428-rebase-signoff.sh +++ b/t/t3428-rebase-signoff.sh @@ -12,6 +12,13 @@ cat >file <<EOF a EOF +# Expected commit message for initial commit after rebase --signoff +cat >expected-initial-signed <<EOF +Initial empty commit + +Signed-off-by: $(git var GIT_COMMITTER_IDENT | sed -e "s/>.*/>/") +EOF + # Expected commit message after rebase --signoff cat >expected-signed <<EOF first @@ -43,4 +50,35 @@ test_expect_success 'rebase --no-signoff does not add a sign-off line' ' test_cmp expected-unsigned actual ' +test_expect_success 'rebase --exec --signoff adds a sign-off line' ' + test_when_finished "rm exec" && + git commit --amend -m "first" && + git rebase --exec "touch exec" --signoff HEAD^ && + test_path_is_file exec && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase --root --signoff adds a sign-off line' ' + git commit --amend -m "first" && + git rebase --root --keep-empty --signoff && + git cat-file commit HEAD^ | sed -e "1,/^\$/d" >actual && + test_cmp expected-initial-signed actual && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase -i --signoff fails' ' + git commit --amend -m "first" && + git rebase -i --signoff HEAD^ && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase -m --signoff fails' ' + git commit --amend -m "first" && + git rebase -m --signoff HEAD^ && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' test_done diff --git a/t/t3430-rebase-merges.sh b/t/t3430-rebase-merges.sh new file mode 100755 index 0000000000..78f7c99580 --- /dev/null +++ b/t/t3430-rebase-merges.sh @@ -0,0 +1,332 @@ +#!/bin/sh +# +# Copyright (c) 2018 Johannes E. Schindelin +# + +test_description='git rebase -i --rebase-merges + +This test runs git rebase "interactively", retaining the branch structure by +recreating merge commits. + +Initial setup: + + -- B -- (first) + / \ + A - C - D - E - H (master) + \ / + F - G (second) +' +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + +test_cmp_graph () { + cat >expect && + git log --graph --boundary --format=%s "$@" >output && + sed "s/ *$//" <output >output.trimmed && + test_cmp expect output.trimmed +} + +test_expect_success 'setup' ' + write_script replace-editor.sh <<-\EOF && + mv "$1" "$(git rev-parse --git-path ORIGINAL-TODO)" + cp script-from-scratch "$1" + EOF + + test_commit A && + git checkout -b first && + test_commit B && + git checkout master && + test_commit C && + test_commit D && + git merge --no-commit B && + test_tick && + git commit -m E && + git tag -m E E && + git checkout -b second C && + test_commit F && + test_commit G && + git checkout master && + git merge --no-commit G && + test_tick && + git commit -m H && + git tag -m H H +' + +test_expect_success 'create completely different structure' ' + cat >script-from-scratch <<-\EOF && + label onto + + # onebranch + pick G + pick D + label onebranch + + # second + reset onto + pick B + label second + + reset onto + merge -C H second + merge onebranch # Merge the topic branch '\''onebranch'\'' + EOF + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + git rebase -i -r A && + test_cmp_graph <<-\EOF + * Merge the topic branch '\''onebranch'\'' + |\ + | * D + | * G + * | H + |\ \ + | |/ + |/| + | * B + |/ + * A + EOF +' + +test_expect_success 'generate correct todo list' ' + cat >expect <<-\EOF && + label onto + + reset onto + pick d9df450 B + label E + + reset onto + pick 5dee784 C + label branch-point + pick ca2c861 F + pick 088b00a G + label H + + reset branch-point # C + pick 12bd07b D + merge -C 2051b56 E # E + merge -C 233d48a H # H + + EOF + + grep -v "^#" <.git/ORIGINAL-TODO >output && + test_cmp expect output +' + +test_expect_success '`reset` refuses to overwrite untracked files' ' + git checkout -b refuse-to-reset && + test_commit dont-overwrite-untracked && + git checkout @{-1} && + : >dont-overwrite-untracked.t && + echo "reset refs/tags/dont-overwrite-untracked" >script-from-scratch && + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_must_fail git rebase -r HEAD && + git rebase --abort +' + +test_expect_success 'failed `merge` writes patch (may be rescheduled, too)' ' + test_when_finished "test_might_fail git rebase --abort" && + git checkout -b conflicting-merge A && + + : fail because of conflicting untracked file && + >G.t && + echo "merge -C H G" >script-from-scratch && + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + test_must_fail git rebase -ir HEAD && + grep "^merge -C .* G$" .git/rebase-merge/done && + grep "^merge -C .* G$" .git/rebase-merge/git-rebase-todo && + test_path_is_file .git/rebase-merge/patch && + + : fail because of merge conflict && + rm G.t .git/rebase-merge/patch && + git reset --hard && + test_commit conflicting-G G.t not-G conflicting-G && + test_must_fail git rebase --continue && + ! grep "^merge -C .* G$" .git/rebase-merge/git-rebase-todo && + test_path_is_file .git/rebase-merge/patch +' + +test_expect_success 'with a branch tip that was cherry-picked already' ' + git checkout -b already-upstream master && + base="$(git rev-parse --verify HEAD)" && + + test_commit A1 && + test_commit A2 && + git reset --hard $base && + test_commit B1 && + test_tick && + git merge -m "Merge branch A" A2 && + + git checkout -b upstream-with-a2 $base && + test_tick && + git cherry-pick A2 && + + git checkout already-upstream && + test_tick && + git rebase -i -r upstream-with-a2 && + test_cmp_graph upstream-with-a2.. <<-\EOF + * Merge branch A + |\ + | * A1 + * | B1 + |/ + o A2 + EOF +' + +test_expect_success 'do not rebase cousins unless asked for' ' + git checkout -b cousins master && + before="$(git rev-parse --verify HEAD)" && + test_tick && + git rebase -r HEAD^ && + test_cmp_rev HEAD $before && + test_tick && + git rebase --rebase-merges=rebase-cousins HEAD^ && + test_cmp_graph HEAD^.. <<-\EOF + * Merge the topic branch '\''onebranch'\'' + |\ + | * D + | * G + |/ + o H + EOF +' + +test_expect_success 'refs/rewritten/* is worktree-local' ' + git worktree add wt && + cat >wt/script-from-scratch <<-\EOF && + label xyz + exec GIT_DIR=../.git git rev-parse --verify refs/rewritten/xyz >a || : + exec git rev-parse --verify refs/rewritten/xyz >b + EOF + + test_config -C wt sequence.editor \""$PWD"/replace-editor.sh\" && + git -C wt rebase -i HEAD && + test_must_be_empty wt/a && + test_cmp_rev HEAD "$(cat wt/b)" +' + +test_expect_success 'post-rewrite hook and fixups work for merges' ' + git checkout -b post-rewrite && + test_commit same1 && + git reset --hard HEAD^ && + test_commit same2 && + git merge -m "to fix up" same1 && + echo same old same old >same2.t && + test_tick && + git commit --fixup HEAD same2.t && + fixup="$(git rev-parse HEAD)" && + + mkdir -p .git/hooks && + test_when_finished "rm .git/hooks/post-rewrite" && + echo "cat >actual" | write_script .git/hooks/post-rewrite && + + test_tick && + git rebase -i --autosquash -r HEAD^^^ && + printf "%s %s\n%s %s\n%s %s\n%s %s\n" >expect $(git rev-parse \ + $fixup^^2 HEAD^2 \ + $fixup^^ HEAD^ \ + $fixup^ HEAD \ + $fixup HEAD) && + test_cmp expect actual +' + +test_expect_success 'refuse to merge ancestors of HEAD' ' + echo "merge HEAD^" >script-from-scratch && + test_config -C wt sequence.editor \""$PWD"/replace-editor.sh\" && + before="$(git rev-parse HEAD)" && + git rebase -i HEAD && + test_cmp_rev HEAD $before +' + +test_expect_success 'root commits' ' + git checkout --orphan unrelated && + (GIT_AUTHOR_NAME="Parsnip" GIT_AUTHOR_EMAIL="root@example.com" \ + test_commit second-root) && + test_commit third-root && + cat >script-from-scratch <<-\EOF && + pick third-root + label first-branch + reset [new root] + pick second-root + merge first-branch # Merge the 3rd root + EOF + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + git rebase -i --force --root -r && + test "Parsnip" = "$(git show -s --format=%an HEAD^)" && + test $(git rev-parse second-root^0) != $(git rev-parse HEAD^) && + test $(git rev-parse second-root:second-root.t) = \ + $(git rev-parse HEAD^:second-root.t) && + test_cmp_graph HEAD <<-\EOF && + * Merge the 3rd root + |\ + | * third-root + * second-root + EOF + + : fast forward if possible && + before="$(git rev-parse --verify HEAD)" && + test_might_fail git config --unset sequence.editor && + test_tick && + git rebase -i --root -r && + test_cmp_rev HEAD $before +' + +test_expect_success 'a "merge" into a root commit is a fast-forward' ' + head=$(git rev-parse HEAD) && + cat >script-from-scratch <<-EOF && + reset [new root] + merge $head + EOF + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + git rebase -i -r HEAD^ && + test_cmp_rev HEAD $head +' + +test_expect_success 'A root commit can be a cousin, treat it that way' ' + git checkout --orphan khnum && + test_commit yama && + git checkout -b asherah master && + test_commit shamkat && + git merge --allow-unrelated-histories khnum && + test_tick && + git rebase -f -r HEAD^ && + ! test_cmp_rev HEAD^2 khnum && + test_cmp_graph HEAD^.. <<-\EOF && + * Merge branch '\''khnum'\'' into asherah + |\ + | * yama + o shamkat + EOF + test_tick && + git rebase --rebase-merges=rebase-cousins HEAD^ && + test_cmp_graph HEAD^.. <<-\EOF + * Merge branch '\''khnum'\'' into asherah + |\ + | * yama + |/ + o shamkat + EOF +' + +test_expect_success 'labels that are object IDs are rewritten' ' + git checkout -b third B && + test_commit I && + third=$(git rev-parse HEAD) && + git checkout -b labels master && + git merge --no-commit third && + test_tick && + git commit -m "Merge commit '\''$third'\'' into labels" && + echo noop >script-from-scratch && + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + git rebase -i -r A && + grep "^label $third-" .git/ORIGINAL-TODO && + ! grep "^label $third$" .git/ORIGINAL-TODO +' + +test_done diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index 4f2a263b63..d1c68af8c5 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -86,7 +86,7 @@ test_expect_success 'cherry-pick on stat-dirty working tree' ' ( cd copy && git checkout initial && - test-chmtime +40 oops && + test-tool chmtime +40 oops && git cherry-pick added ) ' @@ -150,7 +150,9 @@ test_expect_success 'cherry-pick works with dirty renamed file' ' test_tick && git commit -m renamed && echo modified >renamed && - git cherry-pick refs/heads/unrelated + git cherry-pick refs/heads/unrelated >out && + test $(git rev-parse :0:renamed) = $(git rev-parse HEAD~2:to-rename.t) && + grep -q "^modified$" renamed ' test_done diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index 0acf4b1461..3505b6aa14 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -122,7 +122,7 @@ test_expect_success '--quit keeps HEAD and conflicted index intact' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual ' @@ -220,7 +220,7 @@ test_expect_success 'cherry-pick still writes sequencer state when one commit is { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && cat >expect <<-\EOF && OBJID @@ -247,9 +247,9 @@ test_expect_success '--abort after last commit in sequence' ' test_expect_success 'cherry-pick does not implicitly stomp an existing operation' ' pristine_detach initial && test_expect_code 1 git cherry-pick base..anotherpick && - test-chmtime -v +0 .git/sequencer >expect && + test-tool chmtime --get .git/sequencer >expect && test_expect_code 128 git cherry-pick unrelatedpick && - test-chmtime -v +0 .git/sequencer >actual && + test-tool chmtime --get .git/sequencer >actual && test_cmp expect actual ' @@ -317,7 +317,7 @@ test_expect_success '--continue after resolving conflicts' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual.log && test_cmp expect foo && test_cmp expect.log actual.log @@ -334,7 +334,7 @@ test_expect_success '--continue after resolving conflicts and committing' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && cat >expect <<-\EOF && OBJID @@ -480,11 +480,16 @@ test_expect_success 'malformed instruction sheet 2' ' test_expect_code 128 git cherry-pick --continue ' -test_expect_success 'empty commit set' ' +test_expect_success 'empty commit set (no commits to walk)' ' pristine_detach initial && test_expect_code 128 git cherry-pick base..base ' +test_expect_success 'empty commit set (culled during walk)' ' + pristine_detach initial && + test_expect_code 128 git cherry-pick -2 --author=no.such.author base +' + test_expect_success 'malformed instruction sheet 3' ' pristine_detach initial && test_expect_code 1 git cherry-pick base..anotherpick && diff --git a/t/t3512-cherry-pick-submodule.sh b/t/t3512-cherry-pick-submodule.sh index ce48c4fcca..bd78287841 100755 --- a/t/t3512-cherry-pick-submodule.sh +++ b/t/t3512-cherry-pick-submodule.sh @@ -5,7 +5,6 @@ test_description='cherry-pick can handle submodules' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-submodule-update.sh -KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES=1 test_submodule_switch "git cherry-pick" diff --git a/t/t3513-revert-submodule.sh b/t/t3513-revert-submodule.sh index db9378142a..5e39fcdb66 100755 --- a/t/t3513-revert-submodule.sh +++ b/t/t3513-revert-submodule.sh @@ -25,7 +25,6 @@ git_revert () { git revert HEAD } -KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 test_submodule_switch "git_revert" diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index 46f15169f5..b8fbdefcdc 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -232,7 +232,7 @@ test_expect_success 'Call "rm" from outside the work tree' ' test_expect_success 'refresh index before checking if it is up-to-date' ' git reset --hard && - test-chmtime -86400 frotz/nitfol && + test-tool chmtime -86400 frotz/nitfol && git rm frotz/nitfol && test ! -f frotz/nitfol diff --git a/t/t3700-add.sh b/t/t3700-add.sh index 2748805642..07af05d7ae 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -187,7 +187,7 @@ test_expect_success 'git add --refresh with pathspec' ' echo >foo && echo >bar && echo >baz && git add foo bar baz && H=$(git rev-parse :foo) && git rm -f foo && echo "100644 $H 3 foo" | git update-index --index-info && - test-chmtime -60 bar baz && + test-tool chmtime -60 bar baz && >expect && git add --refresh bar >actual && test_cmp expect actual && diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index 058698df6a..3e9139dca8 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -10,6 +10,19 @@ then test_done fi +diff_cmp () { + for x + do + sed -e '/^index/s/[0-9a-f]*[1-9a-f][0-9a-f]*\.\./1234567../' \ + -e '/^index/s/\.\.[0-9a-f]*[1-9a-f][0-9a-f]*/..9abcdef/' \ + -e '/^index/s/ 00*\.\./ 0000000../' \ + -e '/^index/s/\.\.00*$/..0000000/' \ + -e '/^index/s/\.\.00* /..0000000 /' \ + "$x" >"$x.filtered" + done + test_cmp "$1.filtered" "$2.filtered" +} + test_expect_success 'setup (initial)' ' echo content >file && git add file && @@ -22,20 +35,20 @@ test_expect_success 'status works (initial)' ' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -new file mode 100644 -index 0000000..d95f3ad ---- /dev/null -+++ b/file -@@ -0,0 +1 @@ -+content -EOF + cat >expected <<-\EOF + new file mode 100644 + index 0000000..d95f3ad + --- /dev/null + +++ b/file + @@ -0,0 +1 @@ + +content + EOF ' test_expect_success 'diff works (initial)' ' (echo d; echo 1) | git add -i >output && sed -ne "/new file/,/content/p" <output >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'revert works (initial)' ' git add file && @@ -59,20 +72,20 @@ test_expect_success 'status works (commit)' ' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -index 180b47c..b6f2c08 100644 ---- a/file -+++ b/file -@@ -1 +1,2 @@ - baseline -+content -EOF + cat >expected <<-\EOF + index 180b47c..b6f2c08 100644 + --- a/file + +++ b/file + @@ -1 +1,2 @@ + baseline + +content + EOF ' test_expect_success 'diff works (commit)' ' (echo d; echo 1) | git add -i >output && sed -ne "/^index/,/content/p" <output >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'revert works (commit)' ' git add file && @@ -83,39 +96,32 @@ test_expect_success 'revert works (commit)' ' test_expect_success 'setup expected' ' -cat >expected <<EOF -EOF -' - -test_expect_success 'setup fake editor' ' - >fake_editor.sh && - chmod a+x fake_editor.sh && - test_set_editor "$(pwd)/fake_editor.sh" + cat >expected <<-\EOF + EOF ' test_expect_success 'dummy edit works' ' + test_set_editor : && (echo e; echo a) | git add -p && git diff > diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'setup patch' ' -cat >patch <<EOF -@@ -1,1 +1,4 @@ - this -+patch --does not - apply -EOF + cat >patch <<-\EOF + @@ -1,1 +1,4 @@ + this + +patch + -does not + apply + EOF ' test_expect_success 'setup fake editor' ' - echo "#!$SHELL_PATH" >fake_editor.sh && - cat >>fake_editor.sh <<\EOF && -mv -f "$1" oldpatch && -mv -f patch "$1" -EOF - chmod a+x fake_editor.sh && + write_script "fake_editor.sh" <<-\EOF && + mv -f "$1" oldpatch && + mv -f patch "$1" + EOF test_set_editor "$(pwd)/fake_editor.sh" ' @@ -126,10 +132,10 @@ test_expect_success 'bad edit rejected' ' ' test_expect_success 'setup patch' ' -cat >patch <<EOF -this patch -is garbage -EOF + cat >patch <<-\EOF + this patch + is garbage + EOF ' test_expect_success 'garbage edit rejected' ' @@ -139,34 +145,77 @@ test_expect_success 'garbage edit rejected' ' ' test_expect_success 'setup patch' ' -cat >patch <<EOF -@@ -1,0 +1,0 @@ - baseline -+content -+newcontent -+lines -EOF + cat >patch <<-\EOF + @@ -1,0 +1,0 @@ + baseline + +content + +newcontent + +lines + EOF ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/file b/file -index b5dd6c9..f910ae9 100644 ---- a/file -+++ b/file -@@ -1,4 +1,4 @@ - baseline - content --newcontent -+more - lines -EOF + cat >expected <<-\EOF + diff --git a/file b/file + index b5dd6c9..f910ae9 100644 + --- a/file + +++ b/file + @@ -1,4 +1,4 @@ + baseline + content + -newcontent + +more + lines + EOF ' test_expect_success 'real edit works' ' (echo e; echo n; echo d) | git add -p && git diff >output && - test_cmp expected output + diff_cmp expected output +' + +test_expect_success 'setup file' ' + test_write_lines a "" b "" c >file && + git add file && + test_write_lines a "" d "" c >file +' + +test_expect_success 'setup patch' ' + SP=" " && + NULL="" && + cat >patch <<-EOF + @@ -1,4 +1,4 @@ + a + $NULL + -b + +f + $SP + c + EOF +' + +test_expect_success 'setup expected' ' + cat >expected <<-EOF + diff --git a/file b/file + index b5dd6c9..f910ae9 100644 + --- a/file + +++ b/file + @@ -1,5 +1,5 @@ + a + $SP + -f + +d + $SP + c + EOF +' + +test_expect_success 'edit can strip spaces from empty context lines' ' + test_write_lines e n q | git add -p 2>error && + test_must_be_empty error && + git diff >output && + diff_cmp expected output ' test_expect_success 'skip files similarly as commit -a' ' @@ -178,7 +227,7 @@ test_expect_success 'skip files similarly as commit -a' ' git reset && git commit -am commit && git diff >expected && - test_cmp expected output && + diff_cmp expected output && git reset --hard HEAD^ ' rm -f .gitignore @@ -222,52 +271,67 @@ test_expect_success 'setup again' ' # Write the patch file with a new line at the top and bottom test_expect_success 'setup patch' ' -cat >patch <<EOF -index 180b47c..b6f2c08 100644 ---- a/file -+++ b/file -@@ -1,2 +1,4 @@ -+firstline - baseline - content -+lastline -EOF -' - -# Expected output, similar to the patch but w/ diff at the top + cat >patch <<-\EOF + index 180b47c..b6f2c08 100644 + --- a/file + +++ b/file + @@ -1,2 +1,4 @@ + +firstline + baseline + content + +lastline + \ No newline at end of file + EOF +' + +# Expected output, diff is similar to the patch but w/ diff at the top test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/file b/file -index b6f2c08..61b9053 100755 ---- a/file -+++ b/file -@@ -1,2 +1,4 @@ -+firstline - baseline - content -+lastline -EOF + echo diff --git a/file b/file >expected && + cat patch |sed "/^index/s/ 100644/ 100755/" >>expected && + cat >expected-output <<-\EOF + --- a/file + +++ b/file + @@ -1,2 +1,4 @@ + +firstline + baseline + content + +lastline + \ No newline at end of file + @@ -1,2 +1,3 @@ + +firstline + baseline + content + @@ -1,2 +2,3 @@ + baseline + content + +lastline + \ No newline at end of file + EOF ' # Test splitting the first patch, then adding both -test_expect_success 'add first line works' ' +test_expect_success C_LOCALE_OUTPUT 'add first line works' ' git commit -am "clear local changes" && git apply patch && - (echo s; echo y; echo y) | git add -p file && - git diff --cached > diff && - test_cmp expected diff + printf "%s\n" s y y | git add -p file 2>error | + sed -n -e "s/^Stage this hunk[^@]*\(@@ .*\)/\1/" \ + -e "/^[-+@ \\\\]"/p >output && + test_must_be_empty error && + git diff --cached >diff && + diff_cmp expected diff && + test_cmp expected-output output ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/non-empty b/non-empty -deleted file mode 100644 -index d95f3ad..0000000 ---- a/non-empty -+++ /dev/null -@@ -1 +0,0 @@ --content -EOF + cat >expected <<-\EOF + diff --git a/non-empty b/non-empty + deleted file mode 100644 + index d95f3ad..0000000 + --- a/non-empty + +++ /dev/null + @@ -1 +0,0 @@ + -content + EOF ' test_expect_success 'deleting a non-empty file' ' @@ -278,15 +342,15 @@ test_expect_success 'deleting a non-empty file' ' rm non-empty && echo y | git add -p non-empty && git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'setup expected' ' -cat >expected <<EOF -diff --git a/empty b/empty -deleted file mode 100644 -index e69de29..0000000 -EOF + cat >expected <<-\EOF + diff --git a/empty b/empty + deleted file mode 100644 + index e69de29..0000000 + EOF ' test_expect_success 'deleting an empty file' ' @@ -297,23 +361,17 @@ test_expect_success 'deleting an empty file' ' rm empty && echo y | git add -p empty && git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success 'split hunk setup' ' git reset --hard && - for i in 10 20 30 40 50 60 - do - echo $i - done >test && + test_write_lines 10 20 30 40 50 60 >test && git add test && test_tick && git commit -m test && - for i in 10 15 20 21 22 23 24 30 40 50 60 - do - echo $i - done >test + test_write_lines 10 15 20 21 22 23 24 30 40 50 60 >test ' test_expect_success 'split hunk "add -p (edit)"' ' @@ -334,17 +392,7 @@ test_expect_success 'split hunk "add -p (edit)"' ' ' test_expect_failure 'split hunk "add -p (no, yes, edit)"' ' - cat >test <<-\EOF && - 5 - 10 - 20 - 21 - 30 - 31 - 40 - 50 - 60 - EOF + test_write_lines 5 10 20 21 30 31 40 50 60 >test && git reset && # test sequence is s(plit), n(o), y(es), e(dit) # q n q q is there to make sure we exit at the end. @@ -378,7 +426,7 @@ test_expect_success 'patch mode ignores unmerged entries' ' +changed EOF git diff --cached >diff && - test_cmp expected diff + diff_cmp expected diff ' test_expect_success TTY 'diffs can be colorized' ' @@ -392,6 +440,26 @@ test_expect_success TTY 'diffs can be colorized' ' grep "$(printf "\\033")" output ' +test_expect_success TTY 'diffFilter filters diff' ' + git reset --hard && + + echo content >test && + test_config interactive.diffFilter "sed s/^/foo:/" && + printf y | test_terminal git add -p >output 2>&1 && + + # avoid depending on the exact coloring or content of the prompts, + # and just make sure we saw our diff prefixed + grep foo:.*content output +' + +test_expect_success TTY 'detect bogus diffFilter output' ' + git reset --hard && + + echo content >test && + test_config interactive.diffFilter "echo too-short" && + printf y | test_must_fail test_terminal git add -p +' + test_expect_success 'patch-mode via -i prompts for files' ' git reset --hard && @@ -407,7 +475,7 @@ test_expect_success 'patch-mode via -i prompts for files' ' echo test >expect && git diff --cached --name-only >actual && - test_cmp expect actual + diff_cmp expect actual ' test_expect_success 'add -p handles globs' ' @@ -541,4 +609,34 @@ test_expect_success 'status ignores dirty submodules (except HEAD)' ' ! grep dirty-otherwise output ' +test_expect_success 'set up pathological context' ' + git reset --hard && + test_write_lines a a a a a a a a a a a >a && + git add a && + git commit -m a && + test_write_lines c b a a a a a a a b a a a a >a && + test_write_lines a a a a a a a b a a a a >expected-1 && + test_write_lines b a a a a a a a b a a a a >expected-2 && + # check editing can cope with missing header and deleted context lines + # as well as changes to other lines + test_write_lines +b " a" >patch +' + +test_expect_success 'add -p works with pathological context lines' ' + git reset && + printf "%s\n" n y | + git add -p && + git cat-file blob :a >actual && + test_cmp expected-1 actual +' + +test_expect_success 'add -p patch editing works with pathological context lines' ' + git reset && + # n q q below is in case edit fails + printf "%s\n" e y n q q | + git add -p && + git cat-file blob :a >actual && + test_cmp expected-2 actual +' + test_done diff --git a/t/t3702-add-edit.sh b/t/t3702-add-edit.sh index 3cb74ca296..c6af7f82b5 100755 --- a/t/t3702-add-edit.sh +++ b/t/t3702-add-edit.sh @@ -40,7 +40,6 @@ test_expect_success 'setup' ' cat > expected-patch << EOF diff --git a/file b/file -index b9834b5..9020acb 100644 --- a/file +++ b/file @@ -1,11 +1,6 @@ @@ -80,7 +79,6 @@ EOF cat > expected << EOF diff --git a/file b/file -index b9834b5..ef6e94c 100644 --- a/file +++ b/file @@ -1,10 +1,12 @@ @@ -100,7 +98,7 @@ EOF echo "#!$SHELL_PATH" >fake-editor.sh cat >> fake-editor.sh <<\EOF -mv -f "$1" orig-patch && +egrep -v '^index' "$1" >orig-patch && mv -f patch "$1" EOF @@ -113,7 +111,8 @@ test_expect_success 'add -e' ' git add -e && test_cmp second-part file && test_cmp orig-patch expected-patch && - git diff --cached > out && + git diff --cached >actual && + grep -v index actual >out && test_cmp out expected ' diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index aefde7b172..1f871d3cca 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -726,7 +726,7 @@ test_expect_success 'store updates stash ref and reflog' ' git reset --hard && ! grep quux bazzy && git stash store -m quuxery $STASH_ID && - test $(cat .git/refs/stash) = $STASH_ID && + test $(git rev-parse stash) = $STASH_ID && git reflog --format=%H stash| grep $STASH_ID && git stash pop && grep quux bazzy diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index bfde4057ad..597b0637d1 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -35,24 +35,26 @@ test_expect_success 'stash save --include-untracked cleaned the untracked files' test_cmp expect actual ' +tracked=$(git rev-parse --short $(echo 1 | git hash-object --stdin)) +untracked=$(git rev-parse --short $(echo untracked | git hash-object --stdin)) cat > expect.diff <<EOF diff --git a/HEAD b/HEAD new file mode 100644 -index 0000000..d00491f +index 0000000..$tracked --- /dev/null +++ b/HEAD @@ -0,0 +1 @@ +1 diff --git a/file2 b/file2 new file mode 100644 -index 0000000..d00491f +index 0000000..$tracked --- /dev/null +++ b/file2 @@ -0,0 +1 @@ +1 diff --git a/untracked/untracked b/untracked/untracked new file mode 100644 -index 0000000..5a72eb2 +index 0000000..$untracked --- /dev/null +++ b/untracked/untracked @@ -0,0 +1 @@ @@ -109,10 +111,11 @@ test_expect_success 'stash save -u dirty index' ' git stash -u ' +blob=$(git rev-parse --short $(echo 4 | git hash-object --stdin)) cat > expect <<EOF diff --git a/file3 b/file3 new file mode 100644 -index 0000000..b8626c4 +index 0000000..$blob --- /dev/null +++ b/file3 @@ -0,0 +1 @@ @@ -228,4 +231,56 @@ test_expect_success 'stash previously ignored file' ' test_path_is_file ignored.d/foo ' +test_expect_success 'stash -u -- <untracked> doesnt print error' ' + >untracked && + git stash push -u -- untracked 2>actual && + test_path_is_missing untracked && + test_line_count = 0 actual +' + +test_expect_success 'stash -u -- <untracked> leaves rest of working tree in place' ' + >tracked && + git add tracked && + >untracked && + git stash push -u -- untracked && + test_path_is_missing untracked && + test_path_is_file tracked +' + +test_expect_success 'stash -u -- <tracked> <untracked> clears changes in both' ' + >tracked && + git add tracked && + >untracked && + git stash push -u -- tracked untracked && + test_path_is_missing tracked && + test_path_is_missing untracked +' + +test_expect_success 'stash --all -- <ignored> stashes ignored file' ' + >ignored.d/bar && + git stash push --all -- ignored.d/bar && + test_path_is_missing ignored.d/bar +' + +test_expect_success 'stash --all -- <tracked> <ignored> clears changes in both' ' + >tracked && + git add tracked && + >ignored.d/bar && + git stash push --all -- tracked ignored.d/bar && + test_path_is_missing tracked && + test_path_is_missing ignored.d/bar +' + +test_expect_success 'stash -u -- <ignored> leaves ignored file alone' ' + >ignored.d/bar && + git stash push -u -- ignored.d/bar && + test_path_is_file ignored.d/bar +' + +test_expect_success 'stash -u -- <non-existant> shows no changes when there are none' ' + git stash push -u -- non-existant >actual && + echo "No local changes to save" >expect && + test_i18ncmp expect actual +' + test_done diff --git a/t/t4001-diff-rename.sh b/t/t4001-diff-rename.sh index a07816d560..bf4030371a 100755 --- a/t/t4001-diff-rename.sh +++ b/t/t4001-diff-rename.sh @@ -138,6 +138,18 @@ test_expect_success 'favour same basenames over different ones' ' test_i18ngrep "renamed: .*path1 -> subdir/path1" out ' +test_expect_success 'test diff.renames=true for git status' ' + git -c diff.renames=true status >out && + test_i18ngrep "renamed: .*path1 -> subdir/path1" out +' + +test_expect_success 'test diff.renames=false for git status' ' + git -c diff.renames=false status >out && + test_i18ngrep ! "renamed: .*path1 -> subdir/path1" out && + test_i18ngrep "new file: .*subdir/path1" out && + test_i18ngrep "deleted: .*[^/]path1" out +' + test_expect_success 'favour same basenames even with minor differences' ' git show HEAD:path1 | sed "s/15/16/" > subdir/path1 && git status >out && diff --git a/t/t4002-diff-basic.sh b/t/t4002-diff-basic.sh index a5e8b83083..3a6c21e825 100755 --- a/t/t4002-diff-basic.sh +++ b/t/t4002-diff-basic.sh @@ -131,7 +131,7 @@ cmp_diff_files_output () { # object ID for the changed files because it wants you to look at the # filesystem. sed <"$2" >.test-tmp \ - -e '/^:000000 /d;s/'$_x40'\( [MCRNDU][0-9]*\) /'$_z40'\1 /' && + -e '/^:000000 /d;s/'$OID_REGEX'\( [MCRNDU][0-9]*\) /'$ZERO_OID'\1 /' && test_cmp "$1" .test-tmp } diff --git a/t/t4006-diff-mode.sh b/t/t4006-diff-mode.sh index 76f643b2c2..a8e01eccd1 100755 --- a/t/t4006-diff-mode.sh +++ b/t/t4006-diff-mode.sh @@ -8,7 +8,7 @@ test_description='Test mode change diffs. ' . ./test-lib.sh -sed_script='s/\(:100644 100755\) \('"$_x40"'\) \2 /\1 X X /' +sed_script='s/\(:100644 100755\) \('"$OID_REGEX"'\) \2 /\1 X X /' test_expect_success 'setup' ' echo frotz >rezrov && diff --git a/t/t4007-rename-3.sh b/t/t4007-rename-3.sh index dae327fabb..b187b7f6c6 100755 --- a/t/t4007-rename-3.sh +++ b/t/t4007-rename-3.sh @@ -17,6 +17,7 @@ test_expect_success 'prepare reference tree' ' echo $tree ' +blob=$(git hash-object "$TEST_DIRECTORY/diff-lib/COPYING") test_expect_success 'prepare work tree' ' cp path0/COPYING path1/COPYING && git update-index --add --remove path0/COPYING path1/COPYING @@ -26,8 +27,8 @@ test_expect_success 'prepare work tree' ' # path1 both have COPYING and the latter is a copy of path0/COPYING. # Comparing the full tree with cache should tell us so. -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 6ff87c4664981e4397625791c8ea3bbb5f2279a3 C100 path0/COPYING path1/COPYING +cat >expected <<EOF +:100644 100644 $blob $blob C100 path0/COPYING path1/COPYING EOF test_expect_success 'copy detection' ' @@ -46,8 +47,8 @@ test_expect_success 'copy detection, cached' ' # path1/COPYING suddenly appearing from nowhere, not detected as # a copy from path0/COPYING. -cat >expected <<\EOF -:000000 100644 0000000000000000000000000000000000000000 6ff87c4664981e4397625791c8ea3bbb5f2279a3 A path1/COPYING +cat >expected <<EOF +:000000 100644 $ZERO_OID $blob A path1/COPYING EOF test_expect_success 'copy, limited to a subtree' ' @@ -64,8 +65,8 @@ test_expect_success 'tweak work tree' ' # path0/COPYING. Showing the full tree with cache should tell us about # the rename. -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 6ff87c4664981e4397625791c8ea3bbb5f2279a3 R100 path0/COPYING path1/COPYING +cat >expected <<EOF +:100644 100644 $blob $blob R100 path0/COPYING path1/COPYING EOF test_expect_success 'rename detection' ' @@ -78,8 +79,8 @@ test_expect_success 'rename detection' ' # path0/COPYING. When we say we care only about path1, we should just # see path1/COPYING appearing from nowhere. -cat >expected <<\EOF -:000000 100644 0000000000000000000000000000000000000000 6ff87c4664981e4397625791c8ea3bbb5f2279a3 A path1/COPYING +cat >expected <<EOF +:000000 100644 $ZERO_OID $blob A path1/COPYING EOF test_expect_success 'rename, limited to a subtree' ' diff --git a/t/t4008-diff-break-rewrite.sh b/t/t4008-diff-break-rewrite.sh index 9dd1bc5e16..b1ccd4102e 100755 --- a/t/t4008-diff-break-rewrite.sh +++ b/t/t4008-diff-break-rewrite.sh @@ -27,29 +27,32 @@ Further, with -B and -M together, these should turn into two renames. test_expect_success setup ' cat "$TEST_DIRECTORY"/diff-lib/README >file0 && cat "$TEST_DIRECTORY"/diff-lib/COPYING >file1 && + blob0_id=$(git hash-object file0) && + blob1_id=$(git hash-object file1) && git update-index --add file0 file1 && git tag reference $(git write-tree) ' test_expect_success 'change file1 with copy-edit of file0 and remove file0' ' sed -e "s/git/GIT/" file0 >file1 && + blob2_id=$(git hash-object file1) && rm -f file0 && git update-index --remove file0 file1 ' test_expect_success 'run diff with -B (#1)' ' git diff-index -B --cached reference >current && - cat >expect <<-\EOF && - :100644 000000 548142c327a6790ff8821d67c2ee1eff7a656b52 0000000000000000000000000000000000000000 D file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec M100 file1 + cat >expect <<-EOF && + :100644 000000 $blob0_id $ZERO_OID D file0 + :100644 100644 $blob1_id $blob2_id M100 file1 EOF compare_diff_raw expect current ' test_expect_success 'run diff with -B and -M (#2)' ' git diff-index -B -M reference >current && - cat >expect <<-\EOF && - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec R100 file0 file1 + cat >expect <<-EOF && + :100644 100644 $blob0_id $blob2_id R100 file0 file1 EOF compare_diff_raw expect current ' @@ -66,18 +69,18 @@ test_expect_success 'swap file0 and file1' ' test_expect_success 'run diff with -B (#3)' ' git diff-index -B reference >current && - cat >expect <<-\EOF && - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 6ff87c4664981e4397625791c8ea3bbb5f2279a3 M100 file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 548142c327a6790ff8821d67c2ee1eff7a656b52 M100 file1 + cat >expect <<-EOF && + :100644 100644 $blob0_id $blob1_id M100 file0 + :100644 100644 $blob1_id $blob0_id M100 file1 EOF compare_diff_raw expect current ' test_expect_success 'run diff with -B and -M (#4)' ' git diff-index -B -M reference >current && - cat >expect <<-\EOF && - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 6ff87c4664981e4397625791c8ea3bbb5f2279a3 R100 file1 file0 - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 548142c327a6790ff8821d67c2ee1eff7a656b52 R100 file0 file1 + cat >expect <<-EOF && + :100644 100644 $blob1_id $blob1_id R100 file1 file0 + :100644 100644 $blob0_id $blob0_id R100 file0 file1 EOF compare_diff_raw expect current ' @@ -85,14 +88,15 @@ test_expect_success 'run diff with -B and -M (#4)' ' test_expect_success 'make file0 into something completely different' ' rm -f file0 && test_ln_s_add frotz file0 && + slink_id=$(printf frotz | git hash-object --stdin) && git update-index file1 ' test_expect_success 'run diff with -B (#5)' ' git diff-index -B reference >current && - cat >expect <<-\EOF && - :100644 120000 548142c327a6790ff8821d67c2ee1eff7a656b52 67be421f88824578857624f7b3dc75e99a8a1481 T file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 548142c327a6790ff8821d67c2ee1eff7a656b52 M100 file1 + cat >expect <<-EOF && + :100644 120000 $blob0_id $slink_id T file0 + :100644 100644 $blob1_id $blob0_id M100 file1 EOF compare_diff_raw expect current ' @@ -103,9 +107,9 @@ test_expect_success 'run diff with -B -M (#6)' ' # file0 changed from regular to symlink. file1 is the same as the preimage # of file0. Because the change does not make file0 disappear, file1 is # denoted as a copy of file0 - cat >expect <<-\EOF && - :100644 120000 548142c327a6790ff8821d67c2ee1eff7a656b52 67be421f88824578857624f7b3dc75e99a8a1481 T file0 - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 548142c327a6790ff8821d67c2ee1eff7a656b52 C file0 file1 + cat >expect <<-EOF && + :100644 120000 $blob0_id $slink_id T file0 + :100644 100644 $blob0_id $blob0_id C file0 file1 EOF compare_diff_raw expect current ' @@ -115,9 +119,9 @@ test_expect_success 'run diff with -M (#7)' ' # This should not mistake file0 as the copy source of new file1 # due to type differences. - cat >expect <<-\EOF && - :100644 120000 548142c327a6790ff8821d67c2ee1eff7a656b52 67be421f88824578857624f7b3dc75e99a8a1481 T file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 548142c327a6790ff8821d67c2ee1eff7a656b52 M file1 + cat >expect <<-EOF && + :100644 120000 $blob0_id $slink_id T file0 + :100644 100644 $blob1_id $blob0_id M file1 EOF compare_diff_raw expect current ' @@ -128,25 +132,26 @@ test_expect_success 'file1 edited to look like file0 and file0 rename-edited to git checkout-index -f -u -a && sed -e "s/git/GIT/" file0 >file1 && sed -e "s/git/GET/" file0 >file2 && + blob3_id=$(git hash-object file2) && rm -f file0 && git update-index --add --remove file0 file1 file2 ' test_expect_success 'run diff with -B (#8)' ' git diff-index -B reference >current && - cat >expect <<-\EOF && - :100644 000000 548142c327a6790ff8821d67c2ee1eff7a656b52 0000000000000000000000000000000000000000 D file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec M100 file1 - :000000 100644 0000000000000000000000000000000000000000 69a939f651686f56322566e2fd76715947a24162 A file2 + cat >expect <<-EOF && + :100644 000000 $blob0_id $ZERO_OID D file0 + :100644 100644 $blob1_id $blob2_id M100 file1 + :000000 100644 $ZERO_OID $blob3_id A file2 EOF compare_diff_raw expect current ' test_expect_success 'run diff with -B -C (#9)' ' git diff-index -B -C reference >current && - cat >expect <<-\EOF && - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec C095 file0 file1 - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 69a939f651686f56322566e2fd76715947a24162 R095 file0 file2 + cat >expect <<-EOF && + :100644 100644 $blob0_id $blob2_id C095 file0 file1 + :100644 100644 $blob0_id $blob3_id R095 file0 file2 EOF compare_diff_raw expect current ' diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index 13e7f621ab..108c012a3a 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -73,7 +73,7 @@ test_expect_success 'diff identical, but newly created symlink and file' ' >expected && rm -f frotz nitfol && echo xyzzy >nitfol && - test-chmtime +10 nitfol && + test-tool chmtime +10 nitfol && if test_have_prereq SYMLINKS then ln -s xyzzy frotz @@ -139,11 +139,13 @@ test_expect_success SYMLINKS 'setup symlinks with attributes' ' test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' ' cat >expect <<-\EOF && diff --git a/file.bin b/file.bin - index e69de29..d95f3ad 100644 - Binary files a/file.bin and b/file.bin differ + new file mode 100644 + index 0000000..d95f3ad + Binary files /dev/null and b/file.bin differ diff --git a/link.bin b/link.bin - index e69de29..dce41ec 120000 - --- a/link.bin + new file mode 120000 + index 0000000..dce41ec + --- /dev/null +++ b/link.bin @@ -0,0 +1 @@ +file.bin diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index f10798b2df..f8d853595b 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -76,7 +76,7 @@ test_expect_success setup ' mkdir dir3 && cp dir/sub dir3/sub && - test-chmtime +1 dir3/sub && + test-tool chmtime +1 dir3/sub && git config log.showroot false && git commit --amend && @@ -361,6 +361,11 @@ diff --no-index --raw dir2 dir diff --no-index --raw --abbrev=4 dir2 dir :noellipses diff --no-index --raw --abbrev=4 dir2 dir diff --no-index --raw --no-abbrev dir2 dir + +diff-tree --pretty --root --stat --compact-summary initial +diff-tree --pretty -R --root --stat --compact-summary initial +diff-tree --stat --compact-summary initial mode +diff-tree -R --stat --compact-summary initial mode EOF test_expect_success 'log -S requires an argument' ' diff --git a/t/t4013/diff.diff-tree_--pretty_--root_--stat_--compact-summary_initial b/t/t4013/diff.diff-tree_--pretty_--root_--stat_--compact-summary_initial new file mode 100644 index 0000000000..d6451ff7cc --- /dev/null +++ b/t/t4013/diff.diff-tree_--pretty_--root_--stat_--compact-summary_initial @@ -0,0 +1,12 @@ +$ git diff-tree --pretty --root --stat --compact-summary initial +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial + + dir/sub (new) | 2 ++ + file0 (new) | 3 +++ + file2 (new) | 3 +++ + 3 files changed, 8 insertions(+) +$ diff --git a/t/t4013/diff.diff-tree_--pretty_-R_--root_--stat_--compact-summary_initial b/t/t4013/diff.diff-tree_--pretty_-R_--root_--stat_--compact-summary_initial new file mode 100644 index 0000000000..1989e55cd0 --- /dev/null +++ b/t/t4013/diff.diff-tree_--pretty_-R_--root_--stat_--compact-summary_initial @@ -0,0 +1,12 @@ +$ git diff-tree --pretty -R --root --stat --compact-summary initial +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial + + dir/sub (gone) | 2 -- + file0 (gone) | 3 --- + file2 (gone) | 3 --- + 3 files changed, 8 deletions(-) +$ diff --git a/t/t4013/diff.diff-tree_--stat_--compact-summary_initial_mode b/t/t4013/diff.diff-tree_--stat_--compact-summary_initial_mode new file mode 100644 index 0000000000..9c7c8f63af --- /dev/null +++ b/t/t4013/diff.diff-tree_--stat_--compact-summary_initial_mode @@ -0,0 +1,4 @@ +$ git diff-tree --stat --compact-summary initial mode + file0 (mode +x) | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) +$ diff --git a/t/t4013/diff.diff-tree_-R_--stat_--compact-summary_initial_mode b/t/t4013/diff.diff-tree_-R_--stat_--compact-summary_initial_mode new file mode 100644 index 0000000000..e38f3d3bfb --- /dev/null +++ b/t/t4013/diff.diff-tree_-R_--stat_--compact-summary_initial_mode @@ -0,0 +1,4 @@ +$ git diff-tree -R --stat --compact-summary initial mode + file0 (mode -x) | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) +$ diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 482112ca33..53880da7bb 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -578,7 +578,11 @@ test_expect_success 'excessive subject' ' rm -rf patches/ && git checkout side && + before=$(git hash-object file) && + before=$(git rev-parse --short $before) && for i in 5 6 1 2 3 A 4 B C 7 8 9 10 D E F; do echo "$i"; done >>file && + after=$(git hash-object file) && + after=$(git rev-parse --short $after) && git update-index file && git commit -m "This is an excessively long subject line for a message due to the habit some projects have of not having a short, one-line subject at the start of the commit message, but rather sticking a whole paragraph right at the start as the only thing in the commit message. It had better not become the filename for the patch." && git format-patch -o patches/ master..side && @@ -586,7 +590,6 @@ test_expect_success 'excessive subject' ' ' test_expect_success 'cover-letter inherits diff options' ' - git mv file foo && git commit -m foo && git format-patch --no-renames --cover-letter -1 && @@ -616,7 +619,7 @@ test_expect_success 'shortlog of cover-letter wraps overly-long onelines' ' ' cat > expect << EOF -index 40f36c6..2dc5c23 100644 +index $before..$after 100644 --- a/file +++ b/file @@ -13,4 +13,20 @@ C @@ -640,7 +643,7 @@ test_expect_success 'format-patch respects -U' ' cat > expect << EOF diff --git a/file b/file -index 40f36c6..2dc5c23 100644 +index $before..$after 100644 --- a/file +++ b/file @@ -14,3 +14,19 @@ C @@ -1523,14 +1526,14 @@ test_expect_success 'cover letter auto user override' ' test_expect_success 'format-patch --zero-commit' ' git format-patch --zero-commit --stdout v2..v1 >patch2 && grep "^From " patch2 | sort | uniq >actual && - echo "From $_z40 Mon Sep 17 00:00:00 2001" >expect && + echo "From $ZERO_OID Mon Sep 17 00:00:00 2001" >expect && test_cmp expect actual ' test_expect_success 'From line has expected format' ' git format-patch --stdout v2..v1 >patch2 && grep "^From " patch2 >from && - grep "^From $_x40 Mon Sep 17 00:00:00 2001$" patch2 >filtered && + grep "^From $OID_REGEX Mon Sep 17 00:00:00 2001$" patch2 >filtered && test_cmp from filtered ' @@ -1551,13 +1554,15 @@ test_expect_success 'format-patch -o overrides format.outputDirectory' ' test_expect_success 'format-patch --base' ' git checkout side && - git format-patch --stdout --base=HEAD~3 -1 | tail -n 7 >actual && + git format-patch --stdout --base=HEAD~3 -1 | tail -n 7 >actual1 && + git format-patch --stdout --base=HEAD~3 HEAD~.. | tail -n 7 >actual2 && echo >expected && echo "base-commit: $(git rev-parse HEAD~3)" >>expected && echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --stable | awk "{print \$1}")" >>expected && echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --stable | awk "{print \$1}")" >>expected && signature >> expected && - test_cmp expected actual + test_cmp expected actual1 && + test_cmp expected actual2 ' test_expect_success 'format-patch --base errors out when base commit is in revision list' ' @@ -1661,6 +1666,15 @@ test_expect_success 'format-patch --base with --attach' ' test_write_lines 1 2 >expect && test_cmp expect actual ' +test_expect_success 'format-patch --attach cover-letter only is non-multipart' ' + test_when_finished "rm -fr patches" && + git format-patch -o patches --cover-letter --attach=mimemime --base=HEAD~ -1 && + ! egrep "^--+mimemime" patches/0000*.patch && + egrep "^--+mimemime$" patches/0001*.patch >output && + test_line_count = 2 output && + egrep "^--+mimemime--$" patches/0001*.patch >output && + test_line_count = 1 output +' test_expect_success 'format-patch --pretty=mboxrd' ' sp=" " && diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index 1795ffc3aa..22f9f88f0a 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -33,6 +33,7 @@ diffpatterns=" css fortran fountain + golang html java matlab diff --git a/t/t4018/golang-complex-function b/t/t4018/golang-complex-function new file mode 100644 index 0000000000..e057dcefed --- /dev/null +++ b/t/t4018/golang-complex-function @@ -0,0 +1,8 @@ +type Test struct { + a Type +} + +func (t *Test) RIGHT(a Type) (Type, error) { + t.a = a + return ChangeMe, nil +} diff --git a/t/t4018/golang-func b/t/t4018/golang-func new file mode 100644 index 0000000000..8e9c9ac7c3 --- /dev/null +++ b/t/t4018/golang-func @@ -0,0 +1,4 @@ +func RIGHT() { + a := 5 + b := ChangeMe +} diff --git a/t/t4018/golang-interface b/t/t4018/golang-interface new file mode 100644 index 0000000000..553bedec96 --- /dev/null +++ b/t/t4018/golang-interface @@ -0,0 +1,4 @@ +type RIGHT interface { + a() Type + b() ChangeMe +} diff --git a/t/t4018/golang-long-func b/t/t4018/golang-long-func new file mode 100644 index 0000000000..ac3a77b5c4 --- /dev/null +++ b/t/t4018/golang-long-func @@ -0,0 +1,5 @@ +func RIGHT(aVeryVeryVeryLongVariableName AVeryVeryVeryLongType, + anotherLongVariableName AnotherLongType) { + a := 5 + b := ChangeMe +} diff --git a/t/t4018/golang-struct b/t/t4018/golang-struct new file mode 100644 index 0000000000..5deda77fee --- /dev/null +++ b/t/t4018/golang-struct @@ -0,0 +1,4 @@ +type RIGHT struct { + a Type + b ChangeMe +} diff --git a/t/t4018/php-abstract-class b/t/t4018/php-abstract-class new file mode 100644 index 0000000000..5213e12494 --- /dev/null +++ b/t/t4018/php-abstract-class @@ -0,0 +1,4 @@ +abstract class RIGHT +{ + const FOO = 'ChangeMe'; +} diff --git a/t/t4018/php-class b/t/t4018/php-class new file mode 100644 index 0000000000..7785b6303c --- /dev/null +++ b/t/t4018/php-class @@ -0,0 +1,4 @@ +class RIGHT +{ + const FOO = 'ChangeMe'; +} diff --git a/t/t4018/php-final-class b/t/t4018/php-final-class new file mode 100644 index 0000000000..69f5710552 --- /dev/null +++ b/t/t4018/php-final-class @@ -0,0 +1,4 @@ +final class RIGHT +{ + const FOO = 'ChangeMe'; +} diff --git a/t/t4018/php-function b/t/t4018/php-function new file mode 100644 index 0000000000..35717c51c3 --- /dev/null +++ b/t/t4018/php-function @@ -0,0 +1,4 @@ +function RIGHT() +{ + return 'ChangeMe'; +} diff --git a/t/t4018/php-interface b/t/t4018/php-interface new file mode 100644 index 0000000000..86b49ad5d9 --- /dev/null +++ b/t/t4018/php-interface @@ -0,0 +1,4 @@ +interface RIGHT +{ + public function foo($ChangeMe); +} diff --git a/t/t4018/php-method b/t/t4018/php-method new file mode 100644 index 0000000000..03af1a6d9d --- /dev/null +++ b/t/t4018/php-method @@ -0,0 +1,7 @@ +class Klass +{ + public static function RIGHT() + { + return 'ChangeMe'; + } +} diff --git a/t/t4018/php-trait b/t/t4018/php-trait new file mode 100644 index 0000000000..65b8c82a61 --- /dev/null +++ b/t/t4018/php-trait @@ -0,0 +1,7 @@ +trait RIGHT +{ + public function foo($ChangeMe) + { + return 'foo'; + } +} diff --git a/t/t4020-diff-external.sh b/t/t4020-diff-external.sh index 044620186d..e009826fcb 100755 --- a/t/t4020-diff-external.sh +++ b/t/t4020-diff-external.sh @@ -13,6 +13,8 @@ test_expect_success setup ' test_tick && echo second >file && + before=$(git hash-object file) && + before=$(git rev-parse --short $before) && git add file && git commit -m second && @@ -26,7 +28,7 @@ test_expect_success 'GIT_EXTERNAL_DIFF environment' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z100644 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -55,7 +57,7 @@ test_expect_success SYMLINKS 'typechange diff' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z120000 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -73,7 +75,7 @@ test_expect_success 'diff.external' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z100644 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -104,7 +106,7 @@ test_expect_success 'diff attribute' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z100644 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -137,7 +139,7 @@ test_expect_success 'diff attribute' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z100644 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -180,9 +182,13 @@ test_expect_success 'no diff with -diff' ' echo NULZbetweenZwords | perl -pe 'y/Z/\000/' > file test_expect_success 'force diff with "diff"' ' + after=$(git hash-object file) && + after=$(git rev-parse --short $after) && echo >.gitattributes "file diff" && git diff >actual && - test_cmp "$TEST_DIRECTORY"/t4020/diff.NUL actual + sed -e "s/^index .*/index $before..$after 100644/" \ + "$TEST_DIRECTORY"/t4020/diff.NUL >expected-diff && + test_cmp expected-diff actual ' test_expect_success 'GIT_EXTERNAL_DIFF with more than one changed files' ' @@ -237,7 +243,7 @@ test_expect_success 'diff --cached' ' git update-index --assume-unchanged file && echo second >file && git diff --cached >actual && - test_cmp "$TEST_DIRECTORY"/t4020/diff.NUL actual + test_cmp expected-diff actual ' test_expect_success 'clean up crlf leftovers' ' diff --git a/t/t4022-diff-rewrite.sh b/t/t4022-diff-rewrite.sh index cb51d9f9d4..6d1c3d949c 100755 --- a/t/t4022-diff-rewrite.sh +++ b/t/t4022-diff-rewrite.sh @@ -13,6 +13,8 @@ test_expect_success setup ' "nopqrstuvwxyzabcdefghijklmNOPQRSTUVWXYZABCDEFGHIJKLM" \ <"$TEST_DIRECTORY"/../COPYING >test && echo "to be deleted" >test2 && + blob=$(git hash-object test2) && + blob=$(git rev-parse --short $blob) && git add test2 ' @@ -27,7 +29,7 @@ test_expect_success 'detect rewrite' ' cat >expect <<EOF diff --git a/test2 b/test2 deleted file mode 100644 -index 4202011..0000000 +index $blob..0000000 --- a/test2 +++ /dev/null @@ -1 +0,0 @@ @@ -43,7 +45,7 @@ test_expect_success 'show deletion diff without -D' ' cat >expect <<EOF diff --git a/test2 b/test2 deleted file mode 100644 -index 4202011..0000000 +index $blob..0000000 EOF test_expect_success 'suppress deletion diff with -D' ' diff --git a/t/t4027-diff-submodule.sh b/t/t4027-diff-submodule.sh index 2ffd11a142..6304130ad4 100755 --- a/t/t4027-diff-submodule.sh +++ b/t/t4027-diff-submodule.sh @@ -31,7 +31,7 @@ test_expect_success setup ' cd sub && git rev-list HEAD ) && - echo ":160000 160000 $3 $_z40 M sub" >expect && + echo ":160000 160000 $3 $ZERO_OID M sub" >expect && subtip=$3 subprev=$2 ' @@ -250,7 +250,7 @@ test_expect_success 'conflicted submodule setup' ' # 39 efs c=fffffffffffffffffffffffffffffffffffffff && ( - echo "000000 $_z40 0 sub" && + echo "000000 $ZERO_OID 0 sub" && echo "160000 1$c 1 sub" && echo "160000 2$c 2 sub" && echo "160000 3$c 3 sub" @@ -265,7 +265,7 @@ index 2ffffff,3ffffff..0000000 ++Subproject commit 0000000000000000000000000000000000000000'\'' && hh=$(git rev-parse HEAD) && - sed -e "s/$_z40/$hh/" expect.nosub >expect.withsub + sed -e "s/$ZERO_OID/$hh/" expect.nosub >expect.withsub ' diff --git a/t/t4029-diff-trailing-space.sh b/t/t4029-diff-trailing-space.sh index 3ccc237a8d..32b6e9a4e7 100755 --- a/t/t4029-diff-trailing-space.sh +++ b/t/t4029-diff-trailing-space.sh @@ -6,7 +6,7 @@ test_description='diff honors config option, diff.suppressBlankEmpty' . ./test-lib.sh -cat <<\EOF > exp || +cat <<\EOF >expected || diff --git a/f b/f index 5f6a263..8cb8bae 100644 --- a/f @@ -18,22 +18,26 @@ index 5f6a263..8cb8bae 100644 EOF exit 1 -test_expect_success \ - "$test_description" \ - 'printf "\nx\n" > f && - git add f && - git commit -q -m. f && - printf "\ny\n" > f && - git config --bool diff.suppressBlankEmpty true && - git diff f > actual && - test_cmp exp actual && - perl -i.bak -p -e "s/^\$/ /" exp && - git config --bool diff.suppressBlankEmpty false && - git diff f > actual && - test_cmp exp actual && - git config --bool --unset diff.suppressBlankEmpty && - git diff f > actual && - test_cmp exp actual - ' +test_expect_success "$test_description" ' + printf "\nx\n" > f && + before=$(git hash-object f) && + before=$(git rev-parse --short $before) && + git add f && + git commit -q -m. f && + printf "\ny\n" > f && + after=$(git hash-object f) && + after=$(git rev-parse --short $after) && + sed -e "s/^index .*/index $before..$after 100644/" expected >exp && + git config --bool diff.suppressBlankEmpty true && + git diff f > actual && + test_cmp exp actual && + perl -i.bak -p -e "s/^\$/ /" exp && + git config --bool diff.suppressBlankEmpty false && + git diff f > actual && + test_cmp exp actual && + git config --bool --unset diff.suppressBlankEmpty && + git diff f > actual && + test_cmp exp actual +' test_done diff --git a/t/t4030-diff-textconv.sh b/t/t4030-diff-textconv.sh index aad6c7f78d..4cb9f0e523 100755 --- a/t/t4030-diff-textconv.sh +++ b/t/t4030-diff-textconv.sh @@ -148,7 +148,8 @@ test_expect_success 'diffstat does not run textconv' ' # restore working setup echo file diff=foo >.gitattributes -cat >expect.typechange <<'EOF' +symlink=$(git rev-parse --short $(printf frotz | git hash-object --stdin)) +cat >expect.typechange <<EOF --- a/file +++ /dev/null @@ -1,2 +0,0 @@ @@ -156,7 +157,7 @@ cat >expect.typechange <<'EOF' -1 diff --git a/file b/file new file mode 120000 -index 0000000..67be421 +index 0000000..$symlink --- /dev/null +++ b/file @@ -0,0 +1 @@ diff --git a/t/t4035-diff-quiet.sh b/t/t4035-diff-quiet.sh index 2f1737fcef..0352bf81a9 100755 --- a/t/t4035-diff-quiet.sh +++ b/t/t4035-diff-quiet.sh @@ -147,7 +147,7 @@ test_expect_success 'git diff --ignore-all-space, both files outside repo' ' ' test_expect_success 'git diff --quiet ignores stat-change only entries' ' - test-chmtime +10 a && + test-tool chmtime +10 a && echo modified >>b && test_expect_code 1 git diff --quiet ' diff --git a/t/t4042-diff-textconv-caching.sh b/t/t4042-diff-textconv-caching.sh index 04a44d5c61..bf33aedf4b 100755 --- a/t/t4042-diff-textconv-caching.sh +++ b/t/t4042-diff-textconv-caching.sh @@ -15,9 +15,13 @@ test_expect_success 'setup' ' echo bar content 1 >bar.bin && git add . && git commit -m one && + foo1=$(git rev-parse --short HEAD:foo.bin) && + bar1=$(git rev-parse --short HEAD:bar.bin) && echo foo content 2 >foo.bin && echo bar content 2 >bar.bin && git commit -a -m two && + foo2=$(git rev-parse --short HEAD:foo.bin) && + bar2=$(git rev-parse --short HEAD:bar.bin) && echo "*.bin diff=magic" >.gitattributes && git config diff.magic.textconv ./helper && git config diff.magic.cachetextconv true @@ -25,14 +29,14 @@ test_expect_success 'setup' ' cat >expect <<EOF diff --git a/bar.bin b/bar.bin -index fcf9166..28283d5 100644 +index $bar1..$bar2 100644 --- a/bar.bin +++ b/bar.bin @@ -1 +1 @@ -converted: bar content 1 +converted: bar content 2 diff --git a/foo.bin b/foo.bin -index d5b9fe3..1345db2 100644 +index $foo1..$foo2 100644 --- a/foo.bin +++ b/foo.bin @@ -1 +1 @@ @@ -59,7 +63,7 @@ test_expect_success 'cached textconv does not run helper' ' cat >expect <<EOF diff --git a/bar.bin b/bar.bin -index fcf9166..28283d5 100644 +index $bar1..$bar2 100644 --- a/bar.bin +++ b/bar.bin @@ -1,2 +1,2 @@ @@ -67,7 +71,7 @@ index fcf9166..28283d5 100644 -converted: bar content 1 +converted: bar content 2 diff --git a/foo.bin b/foo.bin -index d5b9fe3..1345db2 100644 +index $foo1..$foo2 100644 --- a/foo.bin +++ b/foo.bin @@ -1,2 +1,2 @@ @@ -84,7 +88,7 @@ test_expect_success 'changing textconv invalidates cache' ' cat >expect <<EOF diff --git a/bar.bin b/bar.bin -index fcf9166..28283d5 100644 +index $bar1..$bar2 100644 --- a/bar.bin +++ b/bar.bin @@ -1,2 +1,2 @@ @@ -92,7 +96,7 @@ index fcf9166..28283d5 100644 -converted: bar content 1 +converted: bar content 2 diff --git a/foo.bin b/foo.bin -index d5b9fe3..1345db2 100644 +index $foo1..$foo2 100644 --- a/foo.bin +++ b/foo.bin @@ -1 +1 @@ diff --git a/t/t4044-diff-index-unique-abbrev.sh b/t/t4044-diff-index-unique-abbrev.sh index d5ce72be63..647905e01f 100755 --- a/t/t4044-diff-index-unique-abbrev.sh +++ b/t/t4044-diff-index-unique-abbrev.sh @@ -3,6 +3,12 @@ test_description='test unique sha1 abbreviation on "index from..to" line' . ./test-lib.sh +if ! test_have_prereq SHA1 +then + skip_all='not using SHA-1 for objects' + test_done +fi + cat >expect_initial <<EOF 100644 blob 51d2738463ea4ca66f8691c91e33ce64b7d41bb1 foo EOF diff --git a/t/t4045-diff-relative.sh b/t/t4045-diff-relative.sh index 6471a68701..36f8ed8a81 100755 --- a/t/t4045-diff-relative.sh +++ b/t/t4045-diff-relative.sh @@ -8,6 +8,7 @@ test_expect_success 'setup' ' echo content >file1 && mkdir subdir && echo other content >subdir/file2 && + blob=$(git hash-object subdir/file2) && git add . && git commit -m one ' @@ -17,10 +18,11 @@ check_diff () { shift expect=$1 shift + short_blob=$(git rev-parse --short $blob) cat >expected <<-EOF diff --git a/$expect b/$expect new file mode 100644 - index 0000000..25c05ef + index 0000000..$short_blob --- /dev/null +++ b/$expect @@ -0,0 +1 @@ @@ -68,7 +70,7 @@ check_raw () { expect=$1 shift cat >expected <<-EOF - :000000 100644 0000000000000000000000000000000000000000 25c05ef3639d2d270e7fe765a67668f098092bc5 A $expect + :000000 100644 0000000000000000000000000000000000000000 $blob A $expect EOF test_expect_success "--raw $*" " git -C '$dir' diff --no-abbrev --raw $* HEAD^ >actual && diff --git a/t/t4046-diff-unmerged.sh b/t/t4046-diff-unmerged.sh index d0f14475ca..ff7cfd884a 100755 --- a/t/t4046-diff-unmerged.sh +++ b/t/t4046-diff-unmerged.sh @@ -37,7 +37,7 @@ test_expect_success 'diff-files -0' ' for path in $paths do >"$path" && - echo ":000000 100644 $_z40 $_z40 U $path" + echo ":000000 100644 $ZERO_OID $ZERO_OID U $path" done >diff-files-0.expect && git diff-files -0 >diff-files-0.actual && test_cmp diff-files-0.expect diff-files-0.actual @@ -47,9 +47,9 @@ test_expect_success 'diff-files -1' ' for path in $paths do >"$path" && - echo ":000000 100644 $_z40 $_z40 U $path" && + echo ":000000 100644 $ZERO_OID $ZERO_OID U $path" && case "$path" in - x??) echo ":100644 100644 $blob1 $_z40 M $path" + x??) echo ":100644 100644 $blob1 $ZERO_OID M $path" esac done >diff-files-1.expect && git diff-files -1 >diff-files-1.actual && @@ -60,9 +60,9 @@ test_expect_success 'diff-files -2' ' for path in $paths do >"$path" && - echo ":000000 100644 $_z40 $_z40 U $path" && + echo ":000000 100644 $ZERO_OID $ZERO_OID U $path" && case "$path" in - ?x?) echo ":100644 100644 $blob2 $_z40 M $path" + ?x?) echo ":100644 100644 $blob2 $ZERO_OID M $path" esac done >diff-files-2.expect && git diff-files -2 >diff-files-2.actual && @@ -75,9 +75,9 @@ test_expect_success 'diff-files -3' ' for path in $paths do >"$path" && - echo ":000000 100644 $_z40 $_z40 U $path" && + echo ":000000 100644 $ZERO_OID $ZERO_OID U $path" && case "$path" in - ??x) echo ":100644 100644 $blob3 $_z40 M $path" + ??x) echo ":100644 100644 $blob3 $ZERO_OID M $path" esac done >diff-files-3.expect && git diff-files -3 >diff-files-3.actual && diff --git a/t/t4052-stat-output.sh b/t/t4052-stat-output.sh index 9f563db20a..6e2cf933f7 100755 --- a/t/t4052-stat-output.sh +++ b/t/t4052-stat-output.sh @@ -19,17 +19,33 @@ test_expect_success 'preparation' ' git commit -m message "$name" ' +cat >expect72 <<-'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + +EOF +test_expect_success "format-patch: small change with long name gives more space to the name" ' + git format-patch -1 --stdout >output && + grep " | " output >actual && + test_cmp expect72 actual +' + while read cmd args do - cat >expect <<-'EOF' + cat >expect80 <<-'EOF' ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + EOF test_expect_success "$cmd: small change with long name gives more space to the name" ' git $cmd $args >output && grep " | " output >actual && - test_cmp expect actual + test_cmp expect80 actual ' +done <<\EOF +diff HEAD^ HEAD --stat +show --stat +log -1 --stat +EOF +while read cmd args +do cat >expect <<-'EOF' ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1 + EOF @@ -79,11 +95,11 @@ test_expect_success 'preparation for big change tests' ' git commit -m message abcd ' -cat >expect80 <<'EOF' - abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +cat >expect72 <<'EOF' + abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF -cat >expect80-graph <<'EOF' -| abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +cat >expect72-graph <<'EOF' +| abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ EOF cat >expect200 <<'EOF' abcd | 1000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ @@ -107,7 +123,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect200 diff HEAD^ HEAD --stat respects expect200 show --stat respects expect200 log -1 --stat @@ -135,7 +151,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect40 diff HEAD^ HEAD --stat respects expect40 show --stat respects expect40 log -1 --stat @@ -163,7 +179,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect40 diff HEAD^ HEAD --stat respects expect40 show --stat respects expect40 log -1 --stat @@ -250,11 +266,11 @@ show --stat log -1 --stat EOF -cat >expect80 <<'EOF' - ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++++++++++ +cat >expect72 <<'EOF' + ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++ EOF -cat >expect80-graph <<'EOF' -| ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 ++++++++++++++++++++ +cat >expect72-graph <<'EOF' +| ...aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++ EOF cat >expect200 <<'EOF' aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa | 1000 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ @@ -278,7 +294,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect200 diff HEAD^ HEAD --stat respects expect200 show --stat respects expect200 log -1 --stat @@ -308,7 +324,7 @@ do test_cmp "$expect-graph" actual ' done <<\EOF -ignores expect80 format-patch -1 --stdout +ignores expect72 format-patch -1 --stdout respects expect1 diff HEAD^ HEAD --stat respects expect1 show --stat respects expect1 log -1 --stat diff --git a/t/t4054-diff-bogus-tree.sh b/t/t4054-diff-bogus-tree.sh index 18f42c5fff..fcae82fffa 100755 --- a/t/t4054-diff-bogus-tree.sh +++ b/t/t4054-diff-bogus-tree.sh @@ -19,37 +19,37 @@ test_expect_success 'create tree with matching file' ' ' test_expect_success 'raw diff shows null sha1 (addition)' ' - echo ":000000 100644 $_z40 $_z40 A foo" >expect && + echo ":000000 100644 $ZERO_OID $ZERO_OID A foo" >expect && git diff-tree $EMPTY_TREE $bogus_tree >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (removal)' ' - echo ":100644 000000 $_z40 $_z40 D foo" >expect && + echo ":100644 000000 $ZERO_OID $ZERO_OID D foo" >expect && git diff-tree $bogus_tree $EMPTY_TREE >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (modification)' ' - echo ":100644 100644 $blob $_z40 M foo" >expect && + echo ":100644 100644 $blob $ZERO_OID M foo" >expect && git diff-tree $good_tree $bogus_tree >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (other direction)' ' - echo ":100644 100644 $_z40 $blob M foo" >expect && + echo ":100644 100644 $ZERO_OID $blob M foo" >expect && git diff-tree $bogus_tree $good_tree >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (reverse)' ' - echo ":100644 100644 $_z40 $blob M foo" >expect && + echo ":100644 100644 $ZERO_OID $blob M foo" >expect && git diff-tree -R $good_tree $bogus_tree >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (index)' ' - echo ":100644 100644 $_z40 $blob M foo" >expect && + echo ":100644 100644 $ZERO_OID $blob M foo" >expect && git diff-index $bogus_tree >actual && test_cmp expect actual ' diff --git a/t/t4058-diff-duplicates.sh b/t/t4058-diff-duplicates.sh index 0a23242cb6..c24ee175ef 100755 --- a/t/t4058-diff-duplicates.sh +++ b/t/t4058-diff-duplicates.sh @@ -59,12 +59,12 @@ test_expect_success 'create trees with duplicate entries' ' test_expect_success 'diff-tree between trees' ' { - printf ":000000 100644 $_z40 $blob_two A\touter/inner\n" && - printf ":000000 100644 $_z40 $blob_two A\touter/inner\n" && - printf ":000000 100644 $_z40 $blob_two A\touter/inner\n" && - printf ":100644 000000 $blob_two $_z40 D\touter/inner\n" && - printf ":100644 000000 $blob_two $_z40 D\touter/inner\n" && - printf ":100644 000000 $blob_two $_z40 D\touter/inner\n" + printf ":000000 100644 $ZERO_OID $blob_two A\touter/inner\n" && + printf ":000000 100644 $ZERO_OID $blob_two A\touter/inner\n" && + printf ":000000 100644 $ZERO_OID $blob_two A\touter/inner\n" && + printf ":100644 000000 $blob_two $ZERO_OID D\touter/inner\n" && + printf ":100644 000000 $blob_two $ZERO_OID D\touter/inner\n" && + printf ":100644 000000 $blob_two $ZERO_OID D\touter/inner\n" } >expect && git diff-tree -r --no-abbrev one two >actual && test_cmp expect actual diff --git a/t/t4064-diff-oidfind.sh b/t/t4064-diff-oidfind.sh new file mode 100755 index 0000000000..3bdf317af8 --- /dev/null +++ b/t/t4064-diff-oidfind.sh @@ -0,0 +1,68 @@ +#!/bin/sh + +test_description='test finding specific blobs in the revision walking' +. ./test-lib.sh + +test_expect_success 'setup ' ' + git commit --allow-empty -m "empty initial commit" && + + echo "Hello, world!" >greeting && + git add greeting && + git commit -m "add the greeting blob" && # borrowed from Git from the Bottom Up + git tag -m "the blob" greeting $(git rev-parse HEAD:greeting) && + + echo asdf >unrelated && + git add unrelated && + git commit -m "unrelated history" && + + git revert HEAD^ && + + git commit --allow-empty -m "another unrelated commit" +' + +test_expect_success 'find the greeting blob' ' + cat >expect <<-EOF && + Revert "add the greeting blob" + add the greeting blob + EOF + + git log --format=%s --find-object=greeting^{blob} >actual && + + test_cmp expect actual +' + +test_expect_success 'setup a tree' ' + mkdir a && + echo asdf >a/file && + git add a/file && + git commit -m "add a file in a subdirectory" +' + +test_expect_success 'find a tree' ' + cat >expect <<-EOF && + add a file in a subdirectory + EOF + + git log --format=%s -t --find-object=HEAD:a >actual && + + test_cmp expect actual +' + +test_expect_success 'setup a submodule' ' + test_create_repo sub && + test_commit -C sub sub && + git submodule add ./sub sub && + git commit -a -m "add sub" +' + +test_expect_success 'find a submodule' ' + cat >expect <<-EOF && + add sub + EOF + + git log --format=%s --find-object=HEAD:sub >actual && + + test_cmp expect actual +' + +test_done diff --git a/t/t4135-apply-weird-filenames.sh b/t/t4135-apply-weird-filenames.sh index 27cb0009fb..c7c688fcc4 100755 --- a/t/t4135-apply-weird-filenames.sh +++ b/t/t4135-apply-weird-filenames.sh @@ -89,4 +89,21 @@ test_expect_success 'traditional, whitespace-damaged, colon in timezone' ' test_cmp expected "post image.txt" ' +cat >diff-from-svn <<\EOF +Index: Makefile +=================================================================== +diff --git a/branches/Makefile +deleted file mode 100644 +--- a/branches/Makefile (revision 13) ++++ /dev/null (nonexistent) +@@ +1 0,0 @@ +- +EOF + +test_expect_success 'apply handles a diff generated by Subversion' ' + >Makefile && + git apply -p2 diff-from-svn && + test_path_is_missing Makefile +' + test_done diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 73b67b4280..1ebc587f8f 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -140,8 +140,8 @@ test_expect_success setup ' echo "# User $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>" && echo "# Date $test_tick 25200" && echo "# $(git show --pretty="%aD" -s second)" && - echo "# Node ID $_z40" && - echo "# Parent $_z40" && + echo "# Node ID $ZERO_OID" && + echo "# Parent $ZERO_OID" && cat msg && echo && git diff-tree --no-commit-id -p second @@ -662,6 +662,11 @@ test_expect_success 'am pauses on conflict' ' test -d .git/rebase-apply ' +test_expect_success 'am --show-current-patch' ' + git am --show-current-patch >actual.patch && + test_cmp .git/rebase-apply/0001 actual.patch +' + test_expect_success 'am --skip works' ' echo goodbye >expected && git am --skip && @@ -1045,4 +1050,16 @@ test_expect_success 'am works with multi-line in-body headers' ' git cat-file commit HEAD | grep "^$LONG$" ' +test_expect_success 'am --quit keeps HEAD where it is' ' + mkdir .git/rebase-apply && + >.git/rebase-apply/last && + >.git/rebase-apply/next && + git rev-parse HEAD^ >.git/ORIG_HEAD && + git rev-parse HEAD >expected && + git am --quit && + test_path_is_missing .git/rebase-apply && + git rev-parse HEAD >actual && + test_cmp expected actual +' + test_done diff --git a/t/t4151-am-abort.sh b/t/t4151-am-abort.sh index 9473c2779e..9d8d3c72e7 100755 --- a/t/t4151-am-abort.sh +++ b/t/t4151-am-abort.sh @@ -46,9 +46,8 @@ do test_expect_success "am$with3 --skip continue after failed am$with3" ' test_must_fail git am$with3 --skip >output && - test_i18ngrep "^Applying" output >output.applying && - test_i18ngrep "^Applying: 6$" output.applying && - test_i18ncmp file-2-expect file-2 && + test_i18ngrep "^Applying: 6$" output && + test_cmp file-2-expect file-2 && test ! -f .git/MERGE_RR ' @@ -172,7 +171,7 @@ test_expect_success 'am --skip leaves index stat info alone' ' git checkout -f --orphan skip-stat-info && git reset && test_commit skip-should-be-untouched && - test-chmtime =0 skip-should-be-untouched.t && + test-tool chmtime =0 skip-should-be-untouched.t && git update-index --refresh && git diff-files --exit-code --quiet && test_must_fail git am 0001-*.patch && @@ -184,7 +183,7 @@ test_expect_success 'am --abort leaves index stat info alone' ' git checkout -f --orphan abort-stat-info && git reset && test_commit abort-should-be-untouched && - test-chmtime =0 abort-should-be-untouched.t && + test-tool chmtime =0 abort-should-be-untouched.t && git update-index --refresh && git diff-files --exit-code --quiet && test_must_fail git am 0001-*.patch && diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh index d97d2bebc9..8417e5a4b1 100755 --- a/t/t4200-rerere.sh +++ b/t/t4200-rerere.sh @@ -166,7 +166,7 @@ test_expect_success 'first postimage wins' ' git commit -q -a -m "prefer first over second" && test -f $rr/postimage && - oldmtimepost=$(test-chmtime -v -60 $rr/postimage | cut -f 1) && + oldmtimepost=$(test-tool chmtime --get -60 $rr/postimage) && git checkout -b third master && git show second^:a1 | sed "s/To die: t/To die! T/" >a1 && @@ -179,7 +179,7 @@ test_expect_success 'first postimage wins' ' ' test_expect_success 'rerere updates postimage timestamp' ' - newmtimepost=$(test-chmtime -v +0 $rr/postimage | cut -f 1) && + newmtimepost=$(test-tool chmtime --get $rr/postimage) && test $oldmtimepost -lt $newmtimepost ' @@ -220,9 +220,9 @@ test_expect_success 'set up for garbage collection tests' ' almost_60_days_ago=$((60-60*86400)) && just_over_60_days_ago=$((-1-60*86400)) && - test-chmtime =$just_over_60_days_ago $rr/preimage && - test-chmtime =$almost_60_days_ago $rr/postimage && - test-chmtime =$almost_15_days_ago $rr2/preimage + test-tool chmtime =$just_over_60_days_ago $rr/preimage && + test-tool chmtime =$almost_60_days_ago $rr/postimage && + test-tool chmtime =$almost_15_days_ago $rr2/preimage ' test_expect_success 'gc preserves young or recently used records' ' @@ -232,8 +232,8 @@ test_expect_success 'gc preserves young or recently used records' ' ' test_expect_success 'old records rest in peace' ' - test-chmtime =$just_over_60_days_ago $rr/postimage && - test-chmtime =$just_over_15_days_ago $rr2/preimage && + test-tool chmtime =$just_over_60_days_ago $rr/postimage && + test-tool chmtime =$just_over_15_days_ago $rr2/preimage && git rerere gc && ! test -f $rr/preimage && ! test -f $rr2/preimage @@ -243,14 +243,14 @@ rerere_gc_custom_expiry_test () { five_days="$1" right_now="$2" test_expect_success "rerere gc with custom expiry ($five_days, $right_now)" ' rm -fr .git/rr-cache && - rr=.git/rr-cache/$_z40 && + rr=.git/rr-cache/$ZERO_OID && mkdir -p "$rr" && >"$rr/preimage" && >"$rr/postimage" && two_days_ago=$((-2*86400)) && - test-chmtime =$two_days_ago "$rr/preimage" && - test-chmtime =$two_days_ago "$rr/postimage" && + test-tool chmtime =$two_days_ago "$rr/preimage" && + test-tool chmtime =$two_days_ago "$rr/postimage" && find .git/rr-cache -type f | sort >original && @@ -512,7 +512,7 @@ test_expect_success 'multiple identical conflicts' ' count_pre_post 2 0 && # Pretend that the conflicts were made quite some time ago - find .git/rr-cache/ -type f | xargs test-chmtime -172800 && + test-tool chmtime -172800 $(find .git/rr-cache/ -type f) && # Unresolved entries have not expired yet git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && @@ -568,7 +568,7 @@ test_expect_success 'multiple identical conflicts' ' git rerere && # Pretend that the resolutions are old again - find .git/rr-cache/ -type f | xargs test-chmtime -172800 && + test-tool chmtime -172800 $(find .git/rr-cache/ -type f) && # Resolved entries have not expired yet git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && diff --git a/t/t4201-shortlog.sh b/t/t4201-shortlog.sh index da10478f59..58c2773676 100755 --- a/t/t4201-shortlog.sh +++ b/t/t4201-shortlog.sh @@ -59,7 +59,7 @@ test_expect_success 'setup' ' fuzz() { file=$1 && sed " - s/$_x40/OBJECT_NAME/g + s/$OID_REGEX/OBJECT_NAME/g s/$_x35/OBJID/g s/^ \{6\}[CTa].*/ SUBJECT/g s/^ \{8\}[^ ].*/ CONTINUATION/g @@ -127,6 +127,11 @@ test_expect_success !MINGW 'shortlog can read --format=raw output' ' test_cmp expect out ' +test_expect_success 'shortlog from non-git directory refuses extra arguments' ' + test_must_fail env GIT_DIR=non-existing git shortlog foo 2>out && + test_i18ngrep "too many arguments" out +' + test_expect_success 'shortlog should add newline when input line matches wraplen' ' cat >expect <<\EOF && A U Thor (2): diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index 591f35daaf..2052cadb11 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -516,22 +516,22 @@ test_expect_success 'log decoration properly follows tag chain' ' git commit --amend -m shorter && git log --no-walk --tags --pretty="%H %d" --decorate=full >actual && cat <<-EOF >expected && - $head1 (tag: refs/tags/tag2) $head2 (tag: refs/tags/message-one) $old_head1 (tag: refs/tags/message-two) + $head1 (tag: refs/tags/tag2) EOF - sort actual >actual1 && + sort -k3 actual >actual1 && test_cmp expected actual1 ' test_expect_success 'clean log decoration' ' git log --no-walk --tags --pretty="%H %D" --decorate=full >actual && cat >expected <<-EOF && - $head1 tag: refs/tags/tag2 $head2 tag: refs/tags/message-one $old_head1 tag: refs/tags/message-two + $head1 tag: refs/tags/tag2 EOF - sort actual >actual1 && + sort -k3 actual >actual1 && test_cmp expected actual1 ' diff --git a/t/t4208-log-magic-pathspec.sh b/t/t4208-log-magic-pathspec.sh index a1705f70cf..4c8f3b8e1b 100755 --- a/t/t4208-log-magic-pathspec.sh +++ b/t/t4208-log-magic-pathspec.sh @@ -25,6 +25,32 @@ test_expect_success '"git log :/a -- " should not be ambiguous' ' git log :/a -- ' +test_expect_success '"git log :/detached -- " should find a commit only in HEAD' ' + test_when_finished "git checkout master" && + git checkout --detach && + # Must manually call `test_tick` instead of using `test_commit`, + # because the latter additionally creates a tag, which would make + # the commit reachable not only via HEAD. + test_tick && + git commit --allow-empty -m detached && + test_tick && + git commit --allow-empty -m something-else && + git log :/detached -- +' + +test_expect_success '"git log :/detached -- " should not find an orphaned commit' ' + test_must_fail git log :/detached -- +' + +test_expect_success '"git log :/detached -- " should find HEAD only of own worktree' ' + git worktree add other-tree HEAD && + git -C other-tree checkout --detach && + test_tick && + git -C other-tree commit --allow-empty -m other-detached && + git -C other-tree log :/other-detached -- && + test_must_fail git log :/other-detached -- +' + test_expect_success '"git log -- :/a" should not be ambiguous' ' git log -- :/a ' @@ -45,8 +71,9 @@ test_expect_success 'git log -- :' ' ' test_expect_success 'git log HEAD -- :/' ' + initial=$(git rev-parse --short HEAD^) && cat >expected <<-EOF && - 24b24cf initial + $initial initial EOF (cd sub && git log --oneline HEAD -- :/ >../actual) && test_cmp expected actual diff --git a/t/t4254-am-corrupt.sh b/t/t4254-am-corrupt.sh index 168739c721..fd3bdbfe2c 100755 --- a/t/t4254-am-corrupt.sh +++ b/t/t4254-am-corrupt.sh @@ -25,7 +25,7 @@ test_expect_success setup ' # fatal: unable to write file '(null)' mode 100644: Bad address # Also, it had the unwanted side-effect of deleting f. test_expect_success 'try to apply corrupted patch' ' - test_must_fail git am bad-patch.diff 2>actual + test_must_fail git -c advice.amWorkDir=false am bad-patch.diff 2>actual ' test_expect_success 'compare diagnostic; ensure file is still here' ' diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index fe2d4f15a7..2a97b27b0a 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -101,7 +101,7 @@ test_expect_success \ ten=0123456789 && hundred=$ten$ten$ten$ten$ten$ten$ten$ten$ten$ten && echo long filename >a/four$hundred && mkdir a/bin && - test-genrandom "frotz" 500000 >a/bin/sh && + test-tool genrandom "frotz" 500000 >a/bin/sh && printf "A\$Format:%s\$O" "$SUBSTFORMAT" >a/substfile1 && printf "A not substituted O" >a/substfile2 && if test_have_prereq SYMLINKS; then @@ -192,7 +192,7 @@ test_expect_success \ 'validate file modification time' \ 'mkdir extract && "$TAR" xf b.tar -C extract a/a && - test-chmtime -v +0 extract/a/a |cut -f 1 >b.mtime && + test-tool chmtime --get extract/a/a >b.mtime && echo "1117231200" >expected.mtime && test_cmp expected.mtime b.mtime' diff --git a/t/t5150-request-pull.sh b/t/t5150-request-pull.sh index 08c210f035..fca001eb9b 100755 --- a/t/t5150-request-pull.sh +++ b/t/t5150-request-pull.sh @@ -81,7 +81,7 @@ test_expect_success 'setup: two scripts for reading pull requests' ' cat <<-EOT >fuzz.sed #!/bin/sed -nf s/$downstream_url_for_sed/URL/g - s/$_x40/OBJECT_NAME/g + s/$OID_REGEX/OBJECT_NAME/g s/A U Thor/AUTHOR/g s/[-0-9]\{10\} [:0-9]\{8\} [-+][0-9]\{4\}/DATE/g s/ [^ ].*/ SUBJECT/g diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 9c68b99251..2336d09dcc 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -16,8 +16,8 @@ test_expect_success \ perl -e "print \"a\" x 4096;" > a && perl -e "print \"b\" x 4096;" > b && perl -e "print \"c\" x 4096;" > c && - test-genrandom "seed a" 2097152 > a_big && - test-genrandom "seed b" 2097152 > b_big && + test-tool genrandom "seed a" 2097152 > a_big && + test-tool genrandom "seed b" 2097152 > b_big && git update-index --add a a_big b b_big c && cat c >d && echo foo >>d && git update-index --add d && tree=$(git write-tree) && @@ -311,8 +311,8 @@ test_expect_success 'unpacking with --strict' ' rm -f .git/index && tail -n 10 LIST | git update-index --index-info && ST=$(git write-tree) && - PACK5=$( git rev-list --objects "$LIST" "$LI" "$ST" | \ - git pack-objects test-5 ) && + git rev-list --objects "$LIST" "$LI" "$ST" >actual && + PACK5=$( git pack-objects test-5 <actual ) && PACK6=$( ( echo "$LIST" echo "$LI" @@ -358,8 +358,8 @@ test_expect_success 'index-pack with --strict' ' rm -f .git/index && tail -n 10 LIST | git update-index --index-info && ST=$(git write-tree) && - PACK5=$( git rev-list --objects "$LIST" "$LI" "$ST" | \ - git pack-objects test-5 ) && + git rev-list --objects "$LIST" "$LI" "$ST" >actual && + PACK5=$( git pack-objects test-5 <actual ) && PACK6=$( ( echo "$LIST" echo "$LI" @@ -421,6 +421,12 @@ test_expect_success 'index-pack <pack> works in non-repo' ' test_path_is_file foo.idx ' +test_expect_success 'index-pack --strict <pack> works in non-repo' ' + rm -f foo.idx && + nongit git index-pack --strict ../foo.pack && + test_path_is_file foo.idx +' + test_expect_success !PTHREADS,C_LOCALE_OUTPUT 'index-pack --threads=N or pack.threads=N warns when no pthreads' ' test_must_fail git index-pack --threads=2 2>err && grep ^warning: err >warnings && @@ -457,6 +463,11 @@ test_expect_success !PTHREADS,C_LOCALE_OUTPUT 'pack-objects --threads=N or pack. grep -F "no threads support, ignoring pack.threads" err ' +test_expect_success 'pack-objects in too-many-packs mode' ' + GIT_TEST_FULL_IN_PACK_ARRAY=1 git repack -ad && + git fsck +' + # # WARNING! # @@ -466,9 +477,11 @@ test_expect_success !PTHREADS,C_LOCALE_OUTPUT 'pack-objects --threads=N or pack. test_expect_success \ 'fake a SHA1 hash collision' \ - 'test -f .git/objects/c8/2de19312b6c3695c0c18f70709a6c535682a67 && - cp -f .git/objects/9d/235ed07cd19811a6ceb342de82f190e49c9f68 \ - .git/objects/c8/2de19312b6c3695c0c18f70709a6c535682a67' + 'long_a=$(git hash-object a | sed -e "s!^..!&/!") && + long_b=$(git hash-object b | sed -e "s!^..!&/!") && + test -f .git/objects/$long_b && + cp -f .git/objects/$long_a \ + .git/objects/$long_b' test_expect_success \ 'make sure index-pack detects the SHA1 collision' \ diff --git a/t/t5301-sliding-window.sh b/t/t5301-sliding-window.sh index cae8c2e882..76f9798ab9 100755 --- a/t/t5301-sliding-window.sh +++ b/t/t5301-sliding-window.sh @@ -12,7 +12,7 @@ test_expect_success \ for i in a b c do echo $i >$i && - test-genrandom "$i" 32768 >>$i && + test-tool genrandom "$i" 32768 >>$i && git update-index --add $i || return 1 done && echo d >d && cat c >>d && git update-index --add d && diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index c2fc584dac..bb9b8bb309 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -15,17 +15,17 @@ test_expect_success \ while test $i -le 100 do iii=$(printf '%03i' $i) - test-genrandom "bar" 200 > wide_delta_$iii && - test-genrandom "baz $iii" 50 >> wide_delta_$iii && - test-genrandom "foo"$i 100 > deep_delta_$iii && - test-genrandom "foo"$(expr $i + 1) 100 >> deep_delta_$iii && - test-genrandom "foo"$(expr $i + 2) 100 >> deep_delta_$iii && + test-tool genrandom "bar" 200 > wide_delta_$iii && + test-tool genrandom "baz $iii" 50 >> wide_delta_$iii && + test-tool genrandom "foo"$i 100 > deep_delta_$iii && + test-tool genrandom "foo"$(expr $i + 1) 100 >> deep_delta_$iii && + test-tool genrandom "foo"$(expr $i + 2) 100 >> deep_delta_$iii && echo $iii >file_$iii && - test-genrandom "$iii" 8192 >>file_$iii && + test-tool genrandom "$iii" 8192 >>file_$iii && git update-index --add file_$iii deep_delta_$iii wide_delta_$iii && i=$(expr $i + 1) || return 1 done && - { echo 101 && test-genrandom 100 8192; } >file_101 && + { echo 101 && test-tool genrandom 100 8192; } >file_101 && git update-index --add file_101 && tree=$(git write-tree) && commit=$(git commit-tree $tree </dev/null) && { @@ -262,4 +262,9 @@ EOF grep "^warning:.* expected .tagger. line" err ' +test_expect_success 'index-pack --fsck-objects also warns upon missing tagger in tag' ' + git index-pack --fsck-objects tag-test-${pack1}.pack 2>err && + grep "^warning:.* expected .tagger. line" err +' + test_done diff --git a/t/t5303-pack-corruption-resilience.sh b/t/t5303-pack-corruption-resilience.sh index 5940ce2084..3634e258f8 100755 --- a/t/t5303-pack-corruption-resilience.sh +++ b/t/t5303-pack-corruption-resilience.sh @@ -19,14 +19,14 @@ test_description='resilience to pack corruptions with redundant objects' # 3) object header is always 2 bytes. create_test_files() { - test-genrandom "foo" 2000 > file_1 && - test-genrandom "foo" 1800 > file_2 && - test-genrandom "foo" 1800 > file_3 && + test-tool genrandom "foo" 2000 > file_1 && + test-tool genrandom "foo" 1800 > file_2 && + test-tool genrandom "foo" 1800 > file_3 && echo " base " >> file_1 && echo " delta1 " >> file_2 && echo " delta delta2 " >> file_3 && - test-genrandom "bar" 150 >> file_2 && - test-genrandom "baz" 100 >> file_3 + test-tool genrandom "bar" 150 >> file_2 && + test-tool genrandom "baz" 100 >> file_3 } create_new_pack() { diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index 6694c19a1e..f20f03c103 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -15,7 +15,7 @@ add_blob() { BLOB_FILE=.git/objects/$(echo $BLOB | sed "s/^../&\//") && verbose test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && test_path_is_file $BLOB_FILE && - test-chmtime =+0 $BLOB_FILE + test-tool chmtime =+0 $BLOB_FILE } test_expect_success setup ' @@ -33,7 +33,7 @@ test_expect_success 'prune stale packs' ' orig_pack=$(echo .git/objects/pack/*.pack) && : > .git/objects/tmp_1.pack && : > .git/objects/tmp_2.pack && - test-chmtime =-86501 .git/objects/tmp_1.pack && + test-tool chmtime =-86501 .git/objects/tmp_1.pack && git prune --expire 1.day && test_path_is_file $orig_pack && test_path_is_file .git/objects/tmp_2.pack && @@ -47,7 +47,7 @@ test_expect_success 'prune --expire' ' git prune --expire=1.hour.ago && verbose test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && test_path_is_file $BLOB_FILE && - test-chmtime =-86500 $BLOB_FILE && + test-tool chmtime =-86500 $BLOB_FILE && git prune --expire 1.day && verbose test $before = $(git count-objects | sed "s/ .*//") && test_path_is_missing $BLOB_FILE @@ -57,11 +57,11 @@ test_expect_success 'prune --expire' ' test_expect_success 'gc: implicit prune --expire' ' add_blob && - test-chmtime =-$((2*$week-30)) $BLOB_FILE && + test-tool chmtime =-$((2*$week-30)) $BLOB_FILE && git gc && verbose test $((1 + $before)) = $(git count-objects | sed "s/ .*//") && test_path_is_file $BLOB_FILE && - test-chmtime =-$((2*$week+1)) $BLOB_FILE && + test-tool chmtime =-$((2*$week+1)) $BLOB_FILE && git gc && verbose test $before = $(git count-objects | sed "s/ .*//") && test_path_is_missing $BLOB_FILE @@ -141,7 +141,7 @@ test_expect_success 'prune: do not prune heads listed as an argument' ' test_expect_success 'gc --no-prune' ' add_blob && - test-chmtime =-$((5001*$day)) $BLOB_FILE && + test-tool chmtime =-$((5001*$day)) $BLOB_FILE && git config gc.pruneExpire 2.days.ago && git gc --no-prune && verbose test 1 = $(git count-objects | sed "s/ .*//") && @@ -163,7 +163,7 @@ test_expect_success 'gc respects gc.pruneExpire' ' test_expect_success 'gc --prune=<date>' ' add_blob && - test-chmtime =-$((5001*$day)) $BLOB_FILE && + test-tool chmtime =-$((5001*$day)) $BLOB_FILE && git gc --prune=5002.days.ago && test_path_is_file $BLOB_FILE && git gc --prune=5000.days.ago && @@ -205,7 +205,7 @@ test_expect_success 'prune --expire=never' ' test_expect_success 'gc: prune old objects after local clone' ' add_blob && - test-chmtime =-$((2*$week+1)) $BLOB_FILE && + test-tool chmtime =-$((2*$week+1)) $BLOB_FILE && git clone --no-hardlinks . aclone && ( cd aclone && @@ -320,4 +320,14 @@ test_expect_success 'prune: handle HEAD reflog in multiple worktrees' ' test_cmp expected actual ' +test_expect_success 'prune: handle expire option correctly' ' + test_must_fail git prune --expire 2>error && + test_i18ngrep "requires a value" error && + + test_must_fail git prune --expire=nyah 2>error && + test_i18ngrep "malformed expiration" error && + + git prune --no-expire +' + test_done diff --git a/t/t5308-pack-detect-duplicates.sh b/t/t5308-pack-detect-duplicates.sh index 156ae9e9d3..6845c1f3c3 100755 --- a/t/t5308-pack-detect-duplicates.sh +++ b/t/t5308-pack-detect-duplicates.sh @@ -4,6 +4,12 @@ test_description='handling of duplicate objects in incoming packfiles' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-pack.sh +if ! test_have_prereq SHA1 +then + skip_all='not using SHA-1 for objects' + test_done +fi + # The sha1s we have in our pack. It's important that these have the same # starting byte, so that they end up in the same fanout section of the index. # That lets us make sure we are exercising the binary search with both sets. diff --git a/t/t5309-pack-delta-cycles.sh b/t/t5309-pack-delta-cycles.sh index 3e7861b075..491556dad9 100755 --- a/t/t5309-pack-delta-cycles.sh +++ b/t/t5309-pack-delta-cycles.sh @@ -4,6 +4,12 @@ test_description='test index-pack handling of delta cycles in packfiles' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-pack.sh +if ! test_have_prereq SHA1 +then + skip_all='not using SHA-1 for objects' + test_done +fi + # Two similar-ish objects that we have computed deltas between. A=01d7713666f4de822776c7622c10f1b07de280dc B=e68fe8129b546b101aee9510c5328e7f21ca1d18 diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index 20e2473a03..2d22a17c4a 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -264,9 +264,9 @@ test_expect_success 'pack with missing parent' ' ' test_expect_success JGIT 'we can read jgit bitmaps' ' - git clone . compat-jgit && + git clone --bare . compat-jgit.git && ( - cd compat-jgit && + cd compat-jgit.git && rm -f .git/objects/pack/*.bitmap && jgit gc && git rev-list --test-bitmap HEAD @@ -274,9 +274,9 @@ test_expect_success JGIT 'we can read jgit bitmaps' ' ' test_expect_success JGIT 'jgit can read our bitmaps' ' - git clone . compat-us && + git clone --bare . compat-us.git && ( - cd compat-us && + cd compat-us.git && git repack -adb && # jgit gc will barf if it does not like our bitmaps jgit gc @@ -284,7 +284,7 @@ test_expect_success JGIT 'jgit can read our bitmaps' ' ' test_expect_success 'splitting packs does not generate bogus bitmaps' ' - test-genrandom foo $((1024 * 1024)) >rand && + test-tool genrandom foo $((1024 * 1024)) >rand && git add rand && git commit -m "commit with big file" && git -c pack.packSizeLimit=500k repack -adb && @@ -331,4 +331,17 @@ test_expect_success 'pack reuse respects --incremental' ' git show-index <empty.idx >actual && test_cmp expect actual ' + +test_expect_success 'truncated bitmap fails gracefully' ' + git repack -ad && + git rev-list --use-bitmap-index --count --all >expect && + bitmap=$(ls .git/objects/pack/*.bitmap) && + test_when_finished "rm -f $bitmap" && + head -c 512 <$bitmap >$bitmap.tmp && + mv -f $bitmap.tmp $bitmap && + git rev-list --use-bitmap-index --count --all >actual 2>stderr && + test_cmp expect actual && + test_i18ngrep corrupt stderr +' + test_done diff --git a/t/t5313-pack-bounds-checks.sh b/t/t5313-pack-bounds-checks.sh index 9372508c99..4fe4ad9d61 100755 --- a/t/t5313-pack-bounds-checks.sh +++ b/t/t5313-pack-bounds-checks.sh @@ -163,8 +163,8 @@ test_expect_success 'bogus offset inside v2 extended table' ' test_expect_success 'bogus OFS_DELTA in packfile' ' # Generate a pack with a delta in it. - base=$(test-genrandom foo 3000 | git hash-object --stdin -w) && - delta=$(test-genrandom foo 2000 | git hash-object --stdin -w) && + base=$(test-tool genrandom foo 3000 | git hash-object --stdin -w) && + delta=$(test-tool genrandom foo 2000 | git hash-object --stdin -w) && do_pack "$base $delta" --delta-base-offset && rm -f .git/objects/??/* && diff --git a/t/t5314-pack-cycle-detection.sh b/t/t5314-pack-cycle-detection.sh index f7dbdfb412..f31995d3d2 100755 --- a/t/t5314-pack-cycle-detection.sh +++ b/t/t5314-pack-cycle-detection.sh @@ -73,7 +73,7 @@ make_pack () { } test_expect_success 'setup' ' - test-genrandom base 4096 >base && + test-tool genrandom base 4096 >base && for i in one two do # we want shared content here to encourage deltas... diff --git a/t/t5316-pack-delta-depth.sh b/t/t5316-pack-delta-depth.sh index 2ed479b712..0f06c40eb1 100755 --- a/t/t5316-pack-delta-depth.sh +++ b/t/t5316-pack-delta-depth.sh @@ -47,7 +47,7 @@ test_description='pack-objects breaks long cross-pack delta chains' # repeatedly-modified file to generate the delta chain). test_expect_success 'create series of packs' ' - test-genrandom foo 4096 >content && + test-tool genrandom foo 4096 >content && prev= && for i in $(test_seq 1 10) do diff --git a/t/t5317-pack-objects-filter-objects.sh b/t/t5317-pack-objects-filter-objects.sh index 1b0acc383b..6710c8bc8c 100755 --- a/t/t5317-pack-objects-filter-objects.sh +++ b/t/t5317-pack-objects-filter-objects.sh @@ -160,6 +160,22 @@ test_expect_success 'verify blob:limit=1k' ' test_cmp observed expected ' +test_expect_success 'verify explicitly specifying oversized blob in input' ' + git -C r2 ls-files -s large.1000 large.10000 \ + | awk -f print_2.awk \ + | sort >expected && + git -C r2 pack-objects --rev --stdout --filter=blob:limit=1k >filter.pack <<-EOF && + HEAD + $(git -C r2 rev-parse HEAD:large.10000) + EOF + git -C r2 index-pack ../filter.pack && + git -C r2 verify-pack -v ../filter.pack \ + | grep blob \ + | awk -f print_1.awk \ + | sort >observed && + test_cmp observed expected +' + test_expect_success 'verify blob:limit=1m' ' git -C r2 ls-files -s large.1000 large.10000 \ | awk -f print_2.awk \ diff --git a/t/t5318-commit-graph.sh b/t/t5318-commit-graph.sh new file mode 100755 index 0000000000..77d85aefe7 --- /dev/null +++ b/t/t5318-commit-graph.sh @@ -0,0 +1,233 @@ +#!/bin/sh + +test_description='commit graph' +. ./test-lib.sh + +test_expect_success 'setup full repo' ' + mkdir full && + cd "$TRASH_DIRECTORY/full" && + git init && + git config core.commitGraph true && + objdir=".git/objects" +' + +test_expect_success 'write graph with no packs' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write --object-dir . && + test_path_is_file info/commit-graph +' + +test_expect_success 'create commits and repack' ' + cd "$TRASH_DIRECTORY/full" && + for i in $(test_seq 3) + do + test_commit $i && + git branch commits/$i + done && + git repack +' + +graph_git_two_modes() { + git -c core.graph=true $1 >output + git -c core.graph=false $1 >expect + test_cmp output expect +} + +graph_git_behavior() { + MSG=$1 + DIR=$2 + BRANCH=$3 + COMPARE=$4 + test_expect_success "check normal git operations: $MSG" ' + cd "$TRASH_DIRECTORY/$DIR" && + graph_git_two_modes "log --oneline $BRANCH" && + graph_git_two_modes "log --topo-order $BRANCH" && + graph_git_two_modes "log --graph $COMPARE..$BRANCH" && + graph_git_two_modes "branch -vv" && + graph_git_two_modes "merge-base -a $BRANCH $COMPARE" + ' +} + +graph_git_behavior 'no graph' full commits/3 commits/1 + +graph_read_expect() { + OPTIONAL="" + NUM_CHUNKS=3 + if test ! -z $2 + then + OPTIONAL=" $2" + NUM_CHUNKS=$((3 + $(echo "$2" | wc -w))) + fi + cat >expect <<- EOF + header: 43475048 1 1 $NUM_CHUNKS 0 + num_commits: $1 + chunks: oid_fanout oid_lookup commit_metadata$OPTIONAL + EOF + git commit-graph read >output && + test_cmp expect output +} + +test_expect_success 'write graph' ' + cd "$TRASH_DIRECTORY/full" && + graph1=$(git commit-graph write) && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "3" +' + +graph_git_behavior 'graph exists' full commits/3 commits/1 + +test_expect_success 'Add more commits' ' + cd "$TRASH_DIRECTORY/full" && + git reset --hard commits/1 && + for i in $(test_seq 4 5) + do + test_commit $i && + git branch commits/$i + done && + git reset --hard commits/2 && + for i in $(test_seq 6 7) + do + test_commit $i && + git branch commits/$i + done && + git reset --hard commits/2 && + git merge commits/4 && + git branch merge/1 && + git reset --hard commits/4 && + git merge commits/6 && + git branch merge/2 && + git reset --hard commits/3 && + git merge commits/5 commits/7 && + git branch merge/3 && + git repack +' + +# Current graph structure: +# +# __M3___ +# / | \ +# 3 M1 5 M2 7 +# |/ \|/ \| +# 2 4 6 +# |___/____/ +# 1 + +test_expect_success 'write graph with merges' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "10" "large_edges" +' + +graph_git_behavior 'merge 1 vs 2' full merge/1 merge/2 +graph_git_behavior 'merge 1 vs 3' full merge/1 merge/3 +graph_git_behavior 'merge 2 vs 3' full merge/2 merge/3 + +test_expect_success 'Add one more commit' ' + cd "$TRASH_DIRECTORY/full" && + test_commit 8 && + git branch commits/8 && + ls $objdir/pack | grep idx >existing-idx && + git repack && + ls $objdir/pack| grep idx | grep -v --file=existing-idx >new-idx +' + +# Current graph structure: +# +# 8 +# | +# __M3___ +# / | \ +# 3 M1 5 M2 7 +# |/ \|/ \| +# 2 4 6 +# |___/____/ +# 1 + +graph_git_behavior 'mixed mode, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'mixed mode, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'write graph with new commit' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "11" "large_edges" +' + +graph_git_behavior 'full graph, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'full graph, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'write graph with nothing new' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "11" "large_edges" +' + +graph_git_behavior 'cleared graph, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'cleared graph, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'build graph from latest pack with closure' ' + cd "$TRASH_DIRECTORY/full" && + cat new-idx | git commit-graph write --stdin-packs && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "9" "large_edges" +' + +graph_git_behavior 'graph from pack, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'graph from pack, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'build graph from commits with closure' ' + cd "$TRASH_DIRECTORY/full" && + git tag -a -m "merge" tag/merge merge/2 && + git rev-parse tag/merge >commits-in && + git rev-parse merge/1 >>commits-in && + cat commits-in | git commit-graph write --stdin-commits && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "6" +' + +graph_git_behavior 'graph from commits, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'graph from commits, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'build graph from commits with append' ' + cd "$TRASH_DIRECTORY/full" && + git rev-parse merge/3 | git commit-graph write --stdin-commits --append && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "10" "large_edges" +' + +graph_git_behavior 'append graph, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'append graph, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'setup bare repo' ' + cd "$TRASH_DIRECTORY" && + git clone --bare --no-local full bare && + cd bare && + git config core.commitGraph true && + baredir="./objects" +' + +graph_git_behavior 'bare repo, commit 8 vs merge 1' bare commits/8 merge/1 +graph_git_behavior 'bare repo, commit 8 vs merge 2' bare commits/8 merge/2 + +test_expect_success 'write graph in bare repo' ' + cd "$TRASH_DIRECTORY/bare" && + git commit-graph write && + test_path_is_file $baredir/info/commit-graph && + graph_read_expect "11" "large_edges" +' + +graph_git_behavior 'bare repo with graph, commit 8 vs merge 1' bare commits/8 merge/1 +graph_git_behavior 'bare repo with graph, commit 8 vs merge 2' bare commits/8 merge/2 + +test_expect_success 'perform fast-forward merge in full repo' ' + cd "$TRASH_DIRECTORY/full" && + git checkout -b merge-5-to-8 commits/5 && + git merge commits/8 && + git show-ref -s merge-5-to-8 >output && + git show-ref -s commits/8 >expect && + test_cmp expect output +' + +test_done diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index d375d7110d..911eae1bf7 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -180,7 +180,7 @@ test_expect_success 'receive-pack runs auto-gc in remote repo' ' # And create a file that follows the temporary object naming # convention for the auto-gc to remove : >.git/objects/tmp_test_object && - test-chmtime =-1209601 .git/objects/tmp_test_object + test-tool chmtime =-1209601 .git/objects/tmp_test_object ) && ( cd parent && diff --git a/t/t5404-tracking-branches.sh b/t/t5404-tracking-branches.sh index 2b8c0bac7d..2762f420bc 100755 --- a/t/t5404-tracking-branches.sh +++ b/t/t5404-tracking-branches.sh @@ -56,7 +56,7 @@ test_expect_success 'deleted branches have their tracking branches removed' ' test_expect_success 'already deleted tracking branches ignored' ' git branch -d -r origin/b3 && git push origin :b3 >output 2>&1 && - ! grep error output + ! grep "^error: " output ' test_done diff --git a/t/t5407-post-rewrite-hook.sh b/t/t5407-post-rewrite-hook.sh index 7a48236e87..9b2a274c71 100755 --- a/t/t5407-post-rewrite-hook.sh +++ b/t/t5407-post-rewrite-hook.sh @@ -113,7 +113,7 @@ test_expect_success 'git rebase -m' ' test_expect_success 'git rebase -m --skip' ' git reset --hard D && clear_hook_input && - test_must_fail git rebase --onto A B && + test_must_fail git rebase -m --onto A B && test_must_fail git rebase --skip && echo D > foo && git add foo && diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 80a1a3239a..3d33ab3875 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -30,7 +30,7 @@ add () { test_tick && commit=$(echo "$text" | git commit-tree $tree $parents) && eval "$name=$commit; export $name" && - echo $commit > .git/refs/heads/$branch && + git update-ref "refs/heads/$branch" "$commit" && eval ${branch}TIP=$commit } @@ -45,10 +45,10 @@ pull_to_client () { case "$heads" in *A*) - echo $ATIP > .git/refs/heads/A;; + git update-ref refs/heads/A "$ATIP";; esac && case "$heads" in *B*) - echo $BTIP > .git/refs/heads/B;; + git update-ref refs/heads/B "$BTIP";; esac && git symbolic-ref HEAD refs/heads/$(echo $heads \ | sed -e "s/^\(.\).*$/\1/") && @@ -92,8 +92,8 @@ test_expect_success 'setup' ' cur=$(($cur+1)) done && add B1 $A1 && - echo $ATIP > .git/refs/heads/A && - echo $BTIP > .git/refs/heads/B && + git update-ref refs/heads/A "$ATIP" && + git update-ref refs/heads/B "$BTIP" && git symbolic-ref HEAD refs/heads/B ' @@ -482,24 +482,24 @@ test_expect_success 'set up tests of missing reference' ' test_expect_success 'test lonely missing ref' ' ( cd client && - test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy - ) >/dev/null 2>error-m && + test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy 2>../error-m + ) && test_i18ncmp expect-error error-m ' test_expect_success 'test missing ref after existing' ' ( cd client && - test_must_fail git fetch-pack --no-progress .. refs/heads/A refs/heads/xyzzy - ) >/dev/null 2>error-em && + test_must_fail git fetch-pack --no-progress .. refs/heads/A refs/heads/xyzzy 2>../error-em + ) && test_i18ncmp expect-error error-em ' test_expect_success 'test missing ref before existing' ' ( cd client && - test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy refs/heads/A - ) >/dev/null 2>error-me && + test_must_fail git fetch-pack --no-progress .. refs/heads/xyzzy refs/heads/A 2>../error-me + ) && test_i18ncmp expect-error error-me ' @@ -518,6 +518,54 @@ test_expect_success 'test --all, --depth, and explicit tag' ' ) >out-adt 2>error-adt ' +test_expect_success 'test --all with tag to non-tip' ' + git commit --allow-empty -m non-tip && + git commit --allow-empty -m tip && + git tag -m "annotated" non-tip HEAD^ && + ( + cd client && + git fetch-pack --all .. + ) +' + +test_expect_success 'test --all wrt tag to non-commits' ' + # create tag-to-{blob,tree,commit,tag}, making sure all tagged objects + # are reachable only via created tag references. + blob=$(echo "hello blob" | git hash-object -t blob -w --stdin) && + git tag -a -m "tag -> blob" tag-to-blob $blob && + + tree=$(printf "100644 blob $blob\tfile" | git mktree) && + git tag -a -m "tag -> tree" tag-to-tree $tree && + + tree2=$(printf "100644 blob $blob\tfile2" | git mktree) && + commit=$(git commit-tree -m "hello commit" $tree) && + git tag -a -m "tag -> commit" tag-to-commit $commit && + + blob2=$(echo "hello blob2" | git hash-object -t blob -w --stdin) && + tag=$(git mktag <<-EOF + object $blob2 + type blob + tag tag-to-blob2 + tagger author A U Thor <author@example.com> 0 +0000 + + hello tag + EOF + ) && + git tag -a -m "tag -> tag" tag-to-tag $tag && + + # `fetch-pack --all` should succeed fetching all those objects. + mkdir fetchall && + ( + cd fetchall && + git init && + git fetch-pack --all .. && + git cat-file blob $blob >/dev/null && + git cat-file tree $tree >/dev/null && + git cat-file commit $commit >/dev/null && + git cat-file tag $tag >/dev/null + ) +' + test_expect_success 'shallow fetch with tags does not break the repository' ' mkdir repo1 && ( @@ -711,6 +759,17 @@ test_expect_success 'fetch shallow since ...' ' test_cmp expected actual ' +test_expect_success 'clone shallow since selects no commits' ' + test_create_repo shallow-since-the-future && + ( + cd shallow-since-the-future && + GIT_COMMITTER_DATE="100000000 +0700" git commit --allow-empty -m one && + GIT_COMMITTER_DATE="200000000 +0700" git commit --allow-empty -m two && + GIT_COMMITTER_DATE="300000000 +0700" git commit --allow-empty -m three && + test_must_fail git clone --shallow-since "900000000 +0700" "file://$(pwd)/." ../shallow111 + ) +' + test_expect_success 'shallow clone exclude tag two' ' test_create_repo shallow-exclude && ( @@ -755,4 +814,67 @@ test_expect_success 'fetching deepen' ' ) ' +test_expect_success 'filtering by size' ' + rm -rf server client && + test_create_repo server && + test_commit -C server one && + test_config -C server uploadpack.allowfilter 1 && + + test_create_repo client && + git -C client fetch-pack --filter=blob:limit=0 ../server HEAD && + + # Ensure that object is not inadvertently fetched + test_must_fail git -C client cat-file -e $(git hash-object server/one.t) +' + +test_expect_success 'filtering by size has no effect if support for it is not advertised' ' + rm -rf server client && + test_create_repo server && + test_commit -C server one && + + test_create_repo client && + git -C client fetch-pack --filter=blob:limit=0 ../server HEAD 2> err && + + # Ensure that object is fetched + git -C client cat-file -e $(git hash-object server/one.t) && + + test_i18ngrep "filtering not recognized by server" err +' + +fetch_filter_blob_limit_zero () { + SERVER="$1" + URL="$2" + + rm -rf "$SERVER" client && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" one && + test_config -C "$SERVER" uploadpack.allowfilter 1 && + + git clone "$URL" client && + test_config -C client extensions.partialclone origin && + + test_commit -C "$SERVER" two && + + git -C client fetch --filter=blob:limit=0 origin HEAD:somewhere && + + # Ensure that commit is fetched, but blob is not + test_config -C client extensions.partialclone "arbitrary string" && + git -C client cat-file -e $(git -C "$SERVER" rev-parse two) && + test_must_fail git -C client cat-file -e $(git hash-object "$SERVER/two.t") +} + +test_expect_success 'fetch with --filter=blob:limit=0' ' + fetch_filter_blob_limit_zero server server +' + +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'fetch with --filter=blob:limit=0 and HTTP' ' + fetch_filter_blob_limit_zero "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" +' + +stop_httpd + + test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 3debc87d4a..e402aee6a2 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -63,7 +63,7 @@ test_expect_success "fetch test" ' git commit -a -m "updated by origin" && cd two && git fetch && - test -f .git/refs/heads/one && + git rev-parse --verify refs/heads/one && mine=$(git rev-parse refs/heads/one) && his=$(cd ../one && git rev-parse refs/heads/master) && test "z$mine" = "z$his" @@ -73,8 +73,8 @@ test_expect_success "fetch test for-merge" ' cd "$D" && cd three && git fetch && - test -f .git/refs/heads/two && - test -f .git/refs/heads/one && + git rev-parse --verify refs/heads/two && + git rev-parse --verify refs/heads/one && master_in_two=$(cd ../two && git rev-parse master) && one_in_two=$(cd ../two && git rev-parse one) && { @@ -540,82 +540,232 @@ test_expect_success "should be able to fetch with duplicate refspecs" ' set_config_tristate () { # var=$1 val=$2 case "$2" in - unset) test_unconfig "$1" ;; - *) git config "$1" "$2" ;; + unset) + test_unconfig "$1" + ;; + *) + git config "$1" "$2" + key=$(echo $1 | sed -e 's/^remote\.origin/fetch/') + git_fetch_c="$git_fetch_c -c $key=$2" + ;; esac } test_configured_prune () { - fetch_prune=$1 remote_origin_prune=$2 cmdline=$3 expected=$4 + test_configured_prune_type "$@" "name" + test_configured_prune_type "$@" "link" +} - test_expect_success "prune fetch.prune=$1 remote.origin.prune=$2${3:+ $3}; $4" ' +test_configured_prune_type () { + fetch_prune=$1 + remote_origin_prune=$2 + fetch_prune_tags=$3 + remote_origin_prune_tags=$4 + expected_branch=$5 + expected_tag=$6 + cmdline=$7 + mode=$8 + + if test -z "$cmdline_setup" + then + test_expect_success 'setup cmdline_setup variable for subsequent test' ' + remote_url="file://$(git -C one config remote.origin.url)" && + remote_fetch="$(git -C one config remote.origin.fetch)" && + cmdline_setup="\"$remote_url\" \"$remote_fetch\"" + ' + fi + + if test "$mode" = 'link' + then + new_cmdline="" + + if test "$cmdline" = "" + then + new_cmdline=$cmdline_setup + else + new_cmdline=$(printf "%s" "$cmdline" | perl -pe 's[origin(?!/)]["'"$remote_url"'"]g') + fi + + if test "$fetch_prune_tags" = 'true' || + test "$remote_origin_prune_tags" = 'true' + then + if ! printf '%s' "$cmdline\n" | grep -q refs/remotes/origin/ + then + new_cmdline="$new_cmdline refs/tags/*:refs/tags/*" + fi + fi + + cmdline="$new_cmdline" + fi + + test_expect_success "$mode prune fetch.prune=$1 remote.origin.prune=$2 fetch.pruneTags=$3 remote.origin.pruneTags=$4${7:+ $7}; branch:$5 tag:$6" ' # make sure a newbranch is there in . and also in one git branch -f newbranch && + git tag -f newtag && ( cd one && test_unconfig fetch.prune && + test_unconfig fetch.pruneTags && test_unconfig remote.origin.prune && - git fetch && - git rev-parse --verify refs/remotes/origin/newbranch + test_unconfig remote.origin.pruneTags && + git fetch '"$cmdline_setup"' && + git rev-parse --verify refs/remotes/origin/newbranch && + git rev-parse --verify refs/tags/newtag ) && # now remove it git branch -d newbranch && + git tag -d newtag && # then test ( cd one && + git_fetch_c="" && set_config_tristate fetch.prune $fetch_prune && + set_config_tristate fetch.pruneTags $fetch_prune_tags && set_config_tristate remote.origin.prune $remote_origin_prune && - - git fetch $cmdline && - case "$expected" in + set_config_tristate remote.origin.pruneTags $remote_origin_prune_tags && + + if test "$mode" != "link" + then + git_fetch_c="" + fi && + git$git_fetch_c fetch '"$cmdline"' && + case "$expected_branch" in pruned) test_must_fail git rev-parse --verify refs/remotes/origin/newbranch ;; kept) git rev-parse --verify refs/remotes/origin/newbranch ;; + esac && + case "$expected_tag" in + pruned) + test_must_fail git rev-parse --verify refs/tags/newtag + ;; + kept) + git rev-parse --verify refs/tags/newtag + ;; esac ) ' } -test_configured_prune unset unset "" kept -test_configured_prune unset unset "--no-prune" kept -test_configured_prune unset unset "--prune" pruned - -test_configured_prune false unset "" kept -test_configured_prune false unset "--no-prune" kept -test_configured_prune false unset "--prune" pruned - -test_configured_prune true unset "" pruned -test_configured_prune true unset "--prune" pruned -test_configured_prune true unset "--no-prune" kept - -test_configured_prune unset false "" kept -test_configured_prune unset false "--no-prune" kept -test_configured_prune unset false "--prune" pruned - -test_configured_prune false false "" kept -test_configured_prune false false "--no-prune" kept -test_configured_prune false false "--prune" pruned - -test_configured_prune true false "" kept -test_configured_prune true false "--prune" pruned -test_configured_prune true false "--no-prune" kept - -test_configured_prune unset true "" pruned -test_configured_prune unset true "--no-prune" kept -test_configured_prune unset true "--prune" pruned - -test_configured_prune false true "" pruned -test_configured_prune false true "--no-prune" kept -test_configured_prune false true "--prune" pruned - -test_configured_prune true true "" pruned -test_configured_prune true true "--prune" pruned -test_configured_prune true true "--no-prune" kept +# $1 config: fetch.prune +# $2 config: remote.<name>.prune +# $3 config: fetch.pruneTags +# $4 config: remote.<name>.pruneTags +# $5 expect: branch to be pruned? +# $6 expect: tag to be pruned? +# $7 git-fetch $cmdline: +# +# $1 $2 $3 $4 $5 $6 $7 +test_configured_prune unset unset unset unset kept kept "" +test_configured_prune unset unset unset unset kept kept "--no-prune" +test_configured_prune unset unset unset unset pruned kept "--prune" +test_configured_prune unset unset unset unset kept pruned \ + "--prune origin refs/tags/*:refs/tags/*" +test_configured_prune unset unset unset unset pruned pruned \ + "--prune origin refs/tags/*:refs/tags/* +refs/heads/*:refs/remotes/origin/*" + +test_configured_prune false unset unset unset kept kept "" +test_configured_prune false unset unset unset kept kept "--no-prune" +test_configured_prune false unset unset unset pruned kept "--prune" + +test_configured_prune true unset unset unset pruned kept "" +test_configured_prune true unset unset unset pruned kept "--prune" +test_configured_prune true unset unset unset kept kept "--no-prune" + +test_configured_prune unset false unset unset kept kept "" +test_configured_prune unset false unset unset kept kept "--no-prune" +test_configured_prune unset false unset unset pruned kept "--prune" + +test_configured_prune false false unset unset kept kept "" +test_configured_prune false false unset unset kept kept "--no-prune" +test_configured_prune false false unset unset pruned kept "--prune" +test_configured_prune false false unset unset kept pruned \ + "--prune origin refs/tags/*:refs/tags/*" +test_configured_prune false false unset unset pruned pruned \ + "--prune origin refs/tags/*:refs/tags/* +refs/heads/*:refs/remotes/origin/*" + +test_configured_prune true false unset unset kept kept "" +test_configured_prune true false unset unset pruned kept "--prune" +test_configured_prune true false unset unset kept kept "--no-prune" + +test_configured_prune unset true unset unset pruned kept "" +test_configured_prune unset true unset unset kept kept "--no-prune" +test_configured_prune unset true unset unset pruned kept "--prune" + +test_configured_prune false true unset unset pruned kept "" +test_configured_prune false true unset unset kept kept "--no-prune" +test_configured_prune false true unset unset pruned kept "--prune" + +test_configured_prune true true unset unset pruned kept "" +test_configured_prune true true unset unset pruned kept "--prune" +test_configured_prune true true unset unset kept kept "--no-prune" +test_configured_prune true true unset unset kept pruned \ + "--prune origin refs/tags/*:refs/tags/*" +test_configured_prune true true unset unset pruned pruned \ + "--prune origin refs/tags/*:refs/tags/* +refs/heads/*:refs/remotes/origin/*" + +# --prune-tags on its own does nothing, needs --prune as well, same +# for for fetch.pruneTags without fetch.prune +test_configured_prune unset unset unset unset kept kept "--prune-tags" +test_configured_prune unset unset true unset kept kept "" +test_configured_prune unset unset unset true kept kept "" + +# These will prune the tags +test_configured_prune unset unset unset unset pruned pruned "--prune --prune-tags" +test_configured_prune true unset true unset pruned pruned "" +test_configured_prune unset true unset true pruned pruned "" + +# remote.<name>.pruneTags overrides fetch.pruneTags, just like +# remote.<name>.prune overrides fetch.prune if set. +test_configured_prune true unset true unset pruned pruned "" +test_configured_prune false true false true pruned pruned "" +test_configured_prune true false true false kept kept "" + +# When --prune-tags is supplied it's ignored if an explicit refspec is +# given, same for the configuration options. +test_configured_prune unset unset unset unset pruned kept \ + "--prune --prune-tags origin +refs/heads/*:refs/remotes/origin/*" +test_configured_prune unset unset true unset pruned kept \ + "--prune origin +refs/heads/*:refs/remotes/origin/*" +test_configured_prune unset unset unset true pruned kept \ + "--prune origin +refs/heads/*:refs/remotes/origin/*" + +# Pruning that also takes place if a file:// url replaces a named +# remote. However, because there's no implicit +# +refs/heads/*:refs/remotes/origin/* refspec and supplying it on the +# command-line negates --prune-tags, the branches will not be pruned. +test_configured_prune_type unset unset unset unset kept kept "origin --prune-tags" "name" +test_configured_prune_type unset unset unset unset kept kept "origin --prune-tags" "link" +test_configured_prune_type unset unset unset unset pruned pruned "origin --prune --prune-tags" "name" +test_configured_prune_type unset unset unset unset kept pruned "origin --prune --prune-tags" "link" +test_configured_prune_type unset unset unset unset pruned pruned "--prune --prune-tags origin" "name" +test_configured_prune_type unset unset unset unset kept pruned "--prune --prune-tags origin" "link" +test_configured_prune_type unset unset true unset pruned pruned "--prune origin" "name" +test_configured_prune_type unset unset true unset kept pruned "--prune origin" "link" +test_configured_prune_type unset unset unset true pruned pruned "--prune origin" "name" +test_configured_prune_type unset unset unset true kept pruned "--prune origin" "link" +test_configured_prune_type true unset true unset pruned pruned "origin" "name" +test_configured_prune_type true unset true unset kept pruned "origin" "link" +test_configured_prune_type unset true true unset pruned pruned "origin" "name" +test_configured_prune_type unset true true unset kept pruned "origin" "link" +test_configured_prune_type unset true unset true pruned pruned "origin" "name" +test_configured_prune_type unset true unset true kept pruned "origin" "link" + +# When all remote.origin.fetch settings are deleted a --prune +# --prune-tags still implicitly supplies refs/tags/*:refs/tags/* so +# tags, but not tracking branches, will be deleted. +test_expect_success 'remove remote.origin.fetch "one"' ' + ( + cd one && + git config --unset-all remote.origin.fetch + ) +' +test_configured_prune_type unset unset unset unset kept pruned "origin --prune --prune-tags" "name" +test_configured_prune_type unset unset unset unset kept pruned "origin --prune --prune-tags" "link" test_expect_success 'all boundary commits are excluded' ' test_commit base && @@ -690,8 +840,8 @@ test_expect_success C_LOCALE_OUTPUT 'fetch aligned output' ' test_commit looooooooooooong-tag && ( cd full-output && - git -c fetch.output=full fetch origin 2>&1 | \ - grep -e "->" | cut -c 22- >../actual + git -c fetch.output=full fetch origin >actual 2>&1 && + grep -e "->" actual | cut -c 22- >../actual ) && cat >expect <<-\EOF && master -> origin/master @@ -705,8 +855,8 @@ test_expect_success C_LOCALE_OUTPUT 'fetch compact output' ' test_commit extraaa && ( cd compact && - git -c fetch.output=compact fetch origin 2>&1 | \ - grep -e "->" | cut -c 22- >../actual + git -c fetch.output=compact fetch origin >actual 2>&1 && + grep -e "->" actual | cut -c 22- >../actual ) && cat >expect <<-\EOF && master -> origin/* diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 02106c9226..6a949484d0 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -10,6 +10,9 @@ test_expect_success setup ' test_tick && git commit -m initial && git tag mark && + git tag mark1.1 && + git tag mark1.2 && + git tag mark1.10 && git show-ref --tags -d | sed -e "s/ / /" >expected.tag && ( echo "$(git rev-parse HEAD) HEAD" @@ -39,6 +42,39 @@ test_expect_success 'ls-remote self' ' test_cmp expected.all actual ' +test_expect_success 'ls-remote --sort="version:refname" --tags self' ' + cat >expect <<-EOF && + $(git rev-parse mark) refs/tags/mark + $(git rev-parse mark1.1) refs/tags/mark1.1 + $(git rev-parse mark1.2) refs/tags/mark1.2 + $(git rev-parse mark1.10) refs/tags/mark1.10 + EOF + git ls-remote --sort="version:refname" --tags self >actual && + test_cmp expect actual +' + +test_expect_success 'ls-remote --sort="-version:refname" --tags self' ' + cat >expect <<-EOF && + $(git rev-parse mark1.10) refs/tags/mark1.10 + $(git rev-parse mark1.2) refs/tags/mark1.2 + $(git rev-parse mark1.1) refs/tags/mark1.1 + $(git rev-parse mark) refs/tags/mark + EOF + git ls-remote --sort="-version:refname" --tags self >actual && + test_cmp expect actual +' + +test_expect_success 'ls-remote --sort="-refname" --tags self' ' + cat >expect <<-EOF && + $(git rev-parse mark1.2) refs/tags/mark1.2 + $(git rev-parse mark1.10) refs/tags/mark1.10 + $(git rev-parse mark1.1) refs/tags/mark1.1 + $(git rev-parse mark) refs/tags/mark + EOF + git ls-remote --sort="-refname" --tags self >actual && + test_cmp expect actual +' + test_expect_success 'dies when no remote specified and no default remotes found' ' test_must_fail git ls-remote ' @@ -131,7 +167,7 @@ test_expect_success 'Report no-match with --exit-code' ' test_expect_success 'Report match with --exit-code' ' git ls-remote --exit-code other.git "refs/tags/*" >actual && - git ls-remote . tags/mark >expect && + git ls-remote . tags/mark* >expect && test_cmp expect actual ' @@ -171,13 +207,17 @@ test_expect_success 'overrides work between mixed transfer/upload-pack hideRefs' ' test_expect_success 'ls-remote --symref' ' - cat >expect <<-\EOF && + git fetch origin && + cat >expect <<-EOF && ref: refs/heads/master HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/remotes/origin/HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/remotes/origin/master - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/tags/mark + $(git rev-parse HEAD) HEAD + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse HEAD) refs/remotes/origin/HEAD + $(git rev-parse refs/remotes/origin/master) refs/remotes/origin/master + $(git rev-parse refs/tags/mark) refs/tags/mark + $(git rev-parse refs/tags/mark1.1) refs/tags/mark1.1 + $(git rev-parse refs/tags/mark1.10) refs/tags/mark1.10 + $(git rev-parse refs/tags/mark1.2) refs/tags/mark1.2 EOF git ls-remote --symref >actual && test_cmp expect actual diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 177897ea0b..a5077d8b7c 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -94,6 +94,9 @@ mk_child() { } check_push_result () { + test $# -ge 3 || + error "bug in the test script: check_push_result requires at least 3 parameters" + repo_name="$1" shift @@ -553,10 +556,7 @@ test_expect_success 'branch.*.pushremote config order is irrelevant' ' test_expect_success 'push with dry-run' ' mk_test testrepo heads/master && - ( - cd testrepo && - old_commit=$(git show-ref -s --verify refs/heads/master) - ) && + old_commit=$(git -C testrepo show-ref -s --verify refs/heads/master) && git push --dry-run testrepo : && check_push_result testrepo $old_commit heads/master ' @@ -612,7 +612,7 @@ test_expect_success 'push does not update local refs on failure' ' chmod +x testrepo/.git/hooks/pre-receive && ( cd child && - git pull .. master + git pull .. master && test_must_fail git push && test $(git rev-parse master) != \ $(git rev-parse remotes/origin/master) @@ -634,7 +634,7 @@ test_expect_success 'pushing valid refs triggers post-receive and post-update ho orgmaster=$(cd testrepo && git show-ref -s --verify refs/heads/master) && newmaster=$(git show-ref -s --verify refs/heads/master) && orgnext=$(cd testrepo && git show-ref -s --verify refs/heads/next) && - newnext=$_z40 && + newnext=$ZERO_OID && git push testrepo refs/heads/master:refs/heads/master :refs/heads/next && ( cd testrepo/.git && @@ -672,15 +672,15 @@ test_expect_success 'deleting dangling ref triggers hooks with correct args' ' ( cd testrepo/.git && cat >pre-receive.expect <<-EOF && - $_z40 $_z40 refs/heads/master + $ZERO_OID $ZERO_OID refs/heads/master EOF cat >update.expect <<-EOF && - refs/heads/master $_z40 $_z40 + refs/heads/master $ZERO_OID $ZERO_OID EOF cat >post-receive.expect <<-EOF && - $_z40 $_z40 refs/heads/master + $ZERO_OID $ZERO_OID refs/heads/master EOF cat >post-update.expect <<-EOF && @@ -703,12 +703,12 @@ test_expect_success 'deletion of a non-existent ref is not fed to post-receive a cd testrepo/.git && cat >pre-receive.expect <<-EOF && $orgmaster $newmaster refs/heads/master - $_z40 $_z40 refs/heads/nonexistent + $ZERO_OID $ZERO_OID refs/heads/nonexistent EOF cat >update.expect <<-EOF && refs/heads/master $orgmaster $newmaster - refs/heads/nonexistent $_z40 $_z40 + refs/heads/nonexistent $ZERO_OID $ZERO_OID EOF cat >post-receive.expect <<-EOF && @@ -732,11 +732,11 @@ test_expect_success 'deletion of a non-existent ref alone does trigger post-rece ( cd testrepo/.git && cat >pre-receive.expect <<-EOF && - $_z40 $_z40 refs/heads/nonexistent + $ZERO_OID $ZERO_OID refs/heads/nonexistent EOF cat >update.expect <<-EOF && - refs/heads/nonexistent $_z40 $_z40 + refs/heads/nonexistent $ZERO_OID $ZERO_OID EOF test_cmp pre-receive.expect pre-receive.actual && @@ -751,7 +751,7 @@ test_expect_success 'mixed ref updates, deletes, invalid deletes trigger hooks w orgmaster=$(cd testrepo && git show-ref -s --verify refs/heads/master) && newmaster=$(git show-ref -s --verify refs/heads/master) && orgnext=$(cd testrepo && git show-ref -s --verify refs/heads/next) && - newnext=$_z40 && + newnext=$ZERO_OID && orgpu=$(cd testrepo && git show-ref -s --verify refs/heads/pu) && newpu=$(git show-ref -s --verify refs/heads/master) && git push testrepo refs/heads/master:refs/heads/master \ @@ -763,14 +763,14 @@ test_expect_success 'mixed ref updates, deletes, invalid deletes trigger hooks w $orgmaster $newmaster refs/heads/master $orgnext $newnext refs/heads/next $orgpu $newpu refs/heads/pu - $_z40 $_z40 refs/heads/nonexistent + $ZERO_OID $ZERO_OID refs/heads/nonexistent EOF cat >update.expect <<-EOF && refs/heads/master $orgmaster $newmaster refs/heads/next $orgnext $newnext refs/heads/pu $orgpu $newpu - refs/heads/nonexistent $_z40 $_z40 + refs/heads/nonexistent $ZERO_OID $ZERO_OID EOF cat >post-receive.expect <<-EOF && @@ -1121,6 +1121,25 @@ test_expect_success 'fetch exact SHA1' ' ) ' +test_expect_success 'fetch exact SHA1 in protocol v2' ' + mk_test testrepo heads/master hidden/one && + git push testrepo master:refs/hidden/one && + git -C testrepo config transfer.hiderefs refs/hidden && + check_push_result testrepo $the_commit hidden/one && + + mk_child testrepo child && + git -C child config protocol.version 2 && + + # make sure $the_commit does not exist here + git -C child repack -a -d && + git -C child prune && + test_must_fail git -C child cat-file -t $the_commit && + + # fetching the hidden object succeeds by default + # NEEDSWORK: should this match the v0 behavior instead? + git -C child fetch -v ../testrepo $the_commit:refs/heads/copy +' + for configallowtipsha1inwant in true false do test_expect_success "shallow fetch reachable SHA1 (but not a ref), allowtipsha1inwant=$configallowtipsha1inwant" ' @@ -1418,7 +1437,7 @@ test_expect_success 'receive.denyCurrentBranch = updateInstead' ' cd testrepo && git reset --hard HEAD^ && test $(git -C .. rev-parse HEAD^) = $(git rev-parse HEAD) && - test-chmtime +100 path1 + test-tool chmtime +100 path1 ) && git push testrepo master && ( diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index 74486c73b0..359e03ff83 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -85,7 +85,7 @@ test_expect_success "fetch --recurse-submodules -j2 has the same output behaviou add_upstream_commit && ( cd downstream && - GIT_TRACE=$(pwd)/../trace.out git fetch --recurse-submodules -j2 2>../actual.err + GIT_TRACE="$TRASH_DIRECTORY/trace.out" git fetch --recurse-submodules -j2 2>../actual.err ) && test_must_be_empty actual.out && test_i18ncmp expect.err actual.err && @@ -574,11 +574,7 @@ test_expect_success "fetch new commits when submodule got renamed" ' git clone . downstream_rename && ( cd downstream_rename && - git submodule update --init && -# NEEDSWORK: we omitted --recursive for the submodule update here since -# that does not work. See test 7001 for mv "moving nested submodules" -# for details. Once that is fixed we should add the --recursive option -# here. + git submodule update --init --recursive && git checkout -b rename && git mv submodule submodule_renamed && ( diff --git a/t/t5527-fetch-odd-refs.sh b/t/t5527-fetch-odd-refs.sh index 207899a99f..3b0cb98422 100755 --- a/t/t5527-fetch-odd-refs.sh +++ b/t/t5527-fetch-odd-refs.sh @@ -27,7 +27,7 @@ test_expect_success 'suffix ref is ignored during fetch' ' ' test_expect_success 'try to create repo with absurdly long refname' ' - ref240=$_z40/$_z40/$_z40/$_z40/$_z40/$_z40 && + ref240=$ZERO_OID/$ZERO_OID/$ZERO_OID/$ZERO_OID/$ZERO_OID/$ZERO_OID && ref1440=$ref240/$ref240/$ref240/$ref240/$ref240/$ref240 && git init long && ( diff --git a/t/t5536-fetch-conflicts.sh b/t/t5536-fetch-conflicts.sh index 644736b8a3..91f28c2f78 100755 --- a/t/t5536-fetch-conflicts.sh +++ b/t/t5536-fetch-conflicts.sh @@ -18,14 +18,6 @@ setup_repository () { ) } -verify_stderr () { - cat >expected && - # We're not interested in the error - # "fatal: The remote end hung up unexpectedly": - test_i18ngrep -E '^(fatal|warning):' error | grep -v 'hung up' >actual | sort && - test_i18ncmp expected actual -} - test_expect_success 'setup' ' git commit --allow-empty -m "Initial" && git branch branch1 && @@ -48,9 +40,7 @@ test_expect_success 'fetch conflict: config vs. config' ' "+refs/heads/branch2:refs/remotes/origin/branch1" && ( cd ccc && test_must_fail git fetch origin 2>error && - verify_stderr <<-\EOF - fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1 - EOF + test_i18ngrep "fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1" error ) ' @@ -77,9 +67,7 @@ test_expect_success 'fetch conflict: arg vs. arg' ' test_must_fail git fetch origin \ refs/heads/*:refs/remotes/origin/* \ refs/heads/branch2:refs/remotes/origin/branch1 2>error && - verify_stderr <<-\EOF - fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1 - EOF + test_i18ngrep "fatal: Cannot fetch both refs/heads/branch1 and refs/heads/branch2 to refs/remotes/origin/branch1" error ) ' @@ -90,10 +78,8 @@ test_expect_success 'fetch conflict: criss-cross args' ' git fetch origin \ refs/heads/branch1:refs/remotes/origin/branch2 \ refs/heads/branch2:refs/remotes/origin/branch1 2>error && - verify_stderr <<-\EOF - warning: refs/remotes/origin/branch1 usually tracks refs/heads/branch1, not refs/heads/branch2 - warning: refs/remotes/origin/branch2 usually tracks refs/heads/branch2, not refs/heads/branch1 - EOF + test_i18ngrep "warning: refs/remotes/origin/branch1 usually tracks refs/heads/branch1, not refs/heads/branch2" error && + test_i18ngrep "warning: refs/remotes/origin/branch2 usually tracks refs/heads/branch2, not refs/heads/branch1" error ) ' diff --git a/t/t5537-fetch-shallow.sh b/t/t5537-fetch-shallow.sh index df8d2f095a..7045685e2d 100755 --- a/t/t5537-fetch-shallow.sh +++ b/t/t5537-fetch-shallow.sh @@ -175,8 +175,8 @@ EOF test_expect_success POSIXPERM,SANITY 'shallow fetch from a read-only repo' ' cp -R .git read-only.git && - find read-only.git -print | xargs chmod -w && test_when_finished "find read-only.git -type d -print | xargs chmod +w" && + find read-only.git -print | xargs chmod -w && git clone --no-local --depth=2 read-only.git from-read-only && git --git-dir=from-read-only/.git log --format=%s >actual && cat >expect <<EOF && @@ -186,4 +186,47 @@ EOF test_cmp expect actual ' +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +REPO="$HTTPD_DOCUMENT_ROOT_PATH/repo" + +test_expect_success 'shallow fetches check connectivity before writing shallow file' ' + rm -rf "$REPO" client && + + git init "$REPO" && + test_commit -C "$REPO" one && + test_commit -C "$REPO" two && + test_commit -C "$REPO" three && + + git init client && + + # Use protocol v2 to ensure that shallow information is sent exactly + # once by the server, since we are planning to manipulate it. + git -C "$REPO" config protocol.version 2 && + git -C client config protocol.version 2 && + + git -C client fetch --depth=2 "$HTTPD_URL/one_time_sed/repo" master:a_branch && + + # Craft a situation in which the server sends back an unshallow request + # with an empty packfile. This is done by refetching with a shorter + # depth (to ensure that the packfile is empty), and overwriting the + # shallow line in the response with the unshallow line we want. + printf "s/0034shallow %s/0036unshallow %s/" \ + "$(git -C "$REPO" rev-parse HEAD)" \ + "$(git -C "$REPO" rev-parse HEAD^)" \ + >"$HTTPD_ROOT_PATH/one-time-sed" && + test_must_fail git -C client fetch --depth=1 "$HTTPD_URL/one_time_sed/repo" \ + master:a_branch && + + # Ensure that the one-time-sed script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-sed" && + + # Ensure that the resulting repo is consistent, despite our failure to + # fetch. + git -C client fsck +' + +stop_httpd + test_done diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index 21340e89c9..a2af693068 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -377,5 +377,17 @@ test_expect_success 'push status output scrubs password' ' grep "^To $HTTPD_URL/smart/test_repo.git" status ' +test_expect_success 'colorize errors/hints' ' + cd "$ROOT_PATH"/test_repo_clone && + test_must_fail git -c color.transport=always -c color.advice=always \ + -c color.push=always \ + push origin origin/master^:master 2>act && + test_decode_color <act >decoded && + test_i18ngrep "<RED>.*rejected.*<RESET>" decoded && + test_i18ngrep "<RED>error: failed to push some refs" decoded && + test_i18ngrep "<YELLOW>hint: " decoded && + test_i18ngrep ! "^hint: " decoded +' + stop_httpd test_done diff --git a/t/t5545-push-options.sh b/t/t5545-push-options.sh index 463783789c..b47a95871c 100755 --- a/t/t5545-push-options.sh +++ b/t/t5545-push-options.sh @@ -217,17 +217,32 @@ test_expect_success 'invalid push option in config' ' test_refs master HEAD@{1} ' +test_expect_success 'push options keep quoted characters intact (direct)' ' + mk_repo_pair && + git -C upstream config receive.advertisePushOptions true && + test_commit -C workbench one && + git -C workbench push --push-option="\"embedded quotes\"" up master && + echo "\"embedded quotes\"" >expect && + test_cmp expect upstream/.git/hooks/pre-receive.push_options +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd -test_expect_success 'push option denied properly by http server' ' +# set up http repository for fetching/pushing, with push options config +# bool set to $1 +mk_http_pair () { test_when_finished "rm -rf test_http_clone" && - test_when_finished "rm -rf \"$HTTPD_DOCUMENT_ROOT_PATH\"/upstream.git" && + test_when_finished 'rm -rf "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git' && mk_repo_pair && - git -C upstream config receive.advertisePushOptions false && + git -C upstream config receive.advertisePushOptions "$1" && git -C upstream config http.receivepack true && cp -R upstream/.git "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git && - git clone "$HTTPD_URL"/smart/upstream test_http_clone && + git clone "$HTTPD_URL"/smart/upstream test_http_clone +} + +test_expect_success 'push option denied properly by http server' ' + mk_http_pair false && test_commit -C test_http_clone one && test_must_fail git -C test_http_clone push --push-option=asdf origin master 2>actual && test_i18ngrep "the receiving end does not support push options" actual && @@ -235,13 +250,7 @@ test_expect_success 'push option denied properly by http server' ' ' test_expect_success 'push options work properly across http' ' - test_when_finished "rm -rf test_http_clone" && - test_when_finished "rm -rf \"$HTTPD_DOCUMENT_ROOT_PATH\"/upstream.git" && - mk_repo_pair && - git -C upstream config receive.advertisePushOptions true && - git -C upstream config http.receivepack true && - cp -R upstream/.git "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git && - git clone "$HTTPD_URL"/smart/upstream test_http_clone && + mk_http_pair true && test_commit -C test_http_clone one && git -C test_http_clone push origin master && @@ -260,6 +269,15 @@ test_expect_success 'push options work properly across http' ' test_cmp expect actual ' +test_expect_success 'push options keep quoted characters intact (http)' ' + mk_http_pair true && + + test_commit -C test_http_clone one && + git -C test_http_clone push --push-option="\"embedded quotes\"" origin master && + echo "\"embedded quotes\"" >expect && + test_cmp expect "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git/hooks/pre-receive.push_options +' + stop_httpd test_done diff --git a/t/t5546-receive-limits.sh b/t/t5546-receive-limits.sh index 10cb0be2b7..0b0e987fdb 100755 --- a/t/t5546-receive-limits.sh +++ b/t/t5546-receive-limits.sh @@ -44,7 +44,7 @@ test_pack_input_limit () { } test_expect_success "create known-size (1024 bytes) commit" ' - test-genrandom foo 1024 >one-k && + test-tool genrandom foo 1024 >one-k && git add one-k && test_commit one-k ' diff --git a/t/t5547-push-quarantine.sh b/t/t5547-push-quarantine.sh index 113c87007f..faaa51ccc5 100755 --- a/t/t5547-push-quarantine.sh +++ b/t/t5547-push-quarantine.sh @@ -39,7 +39,7 @@ test_expect_success 'push to repo path with path separator (colon)' ' # so make it likely for us to generate a delta by having # a non-trivial file with multiple versions. - test-genrandom foo 4096 >file.bin && + test-tool genrandom foo 4096 >file.bin && git add file.bin && git commit -m bin && diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index 8552184e74..6d7d88ccc9 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -169,6 +169,17 @@ test_expect_success 'fetch changes via manual http-fetch' ' test_cmp file clone2/file ' +test_expect_success 'manual http-fetch without -a works just as well' ' + cp -R clone-tmpl clone3 && + + HEAD=$(git rev-parse --verify HEAD) && + (cd clone3 && + git http-fetch -w heads/master-new $HEAD $(git config remote.origin.url) && + git checkout master-new && + test $HEAD = $(git rev-parse --verify HEAD)) && + test_cmp file clone3/file +' + test_expect_success 'http remote detects correct HEAD' ' git push public master:other && (cd clone && diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index f5721b4a59..913089b144 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -26,14 +26,14 @@ setup_askpass_helper cat >exp <<EOF > GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 > Accept: */* -> Accept-Encoding: gzip +> Accept-Encoding: ENCODINGS > Pragma: no-cache < HTTP/1.1 200 OK < Pragma: no-cache < Cache-Control: no-cache, max-age=0, must-revalidate < Content-Type: application/x-git-upload-pack-advertisement > POST /smart/repo.git/git-upload-pack HTTP/1.1 -> Accept-Encoding: gzip +> Accept-Encoding: ENCODINGS > Content-Type: application/x-git-upload-pack-request > Accept: application/x-git-upload-pack-result > Content-Length: xxx @@ -79,8 +79,13 @@ test_expect_success 'clone http repository' ' /^< Date: /d /^< Content-Length: /d /^< Transfer-Encoding: /d - " >act && - test_cmp exp act + " >actual && + sed -e "s/^> Accept-Encoding: .*/> Accept-Encoding: ENCODINGS/" \ + actual >actual.smudged && + test_cmp exp actual.smudged && + + grep "Accept-Encoding:.*gzip" actual >actual.gzip && + test_line_count = 2 actual.gzip ' test_expect_success 'fetch changes via http' ' diff --git a/t/t5561-http-backend.sh b/t/t5561-http-backend.sh index 90e0d6f0fe..84a955770a 100755 --- a/t/t5561-http-backend.sh +++ b/t/t5561-http-backend.sh @@ -3,10 +3,16 @@ test_description='test git-http-backend' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-httpd.sh + +if ! test_have_prereq CURL; then + skip_all='skipping raw http-backend tests, curl not available' + test_done +fi + start_httpd GET() { - curl --include "$HTTPD_URL/$SMART/repo.git/$1" >out 2>/dev/null && + curl --include "$HTTPD_URL/$SMART/repo.git/$1" >out && tr '\015' Q <out | sed ' s/Q$// @@ -19,7 +25,7 @@ GET() { POST() { curl --include --data "$2" \ --header "Content-Type: application/x-$1-request" \ - "$HTTPD_URL/smart/repo.git/$1" >out 2>/dev/null && + "$HTTPD_URL/smart/repo.git/$1" >out && tr '\015' Q <out | sed ' s/Q$// diff --git a/t/t5570-git-daemon.sh b/t/t5570-git-daemon.sh index 755b05a8ae..0d4c52016b 100755 --- a/t/t5570-git-daemon.sh +++ b/t/t5570-git-daemon.sh @@ -50,7 +50,7 @@ test_expect_success 'no-op fetch -v stderr is as expected' ' ' test_expect_success 'no-op fetch without "-v" is quiet' ' - (cd clone && git fetch) 2>stderr && + (cd clone && git fetch 2>../stderr) && ! test -s stderr ' diff --git a/t/t5571-pre-push-hook.sh b/t/t5571-pre-push-hook.sh index ba975bb355..ac53d63869 100755 --- a/t/t5571-pre-push-hook.sh +++ b/t/t5571-pre-push-hook.sh @@ -78,8 +78,8 @@ test_expect_success 'push to default' ' cat >expected <<EOF parent1 repo1 -refs/tags/one $COMMIT1 refs/tags/tag1 $_z40 -HEAD~ $COMMIT2 refs/heads/prev $_z40 +refs/tags/one $COMMIT1 refs/tags/tag1 $ZERO_OID +HEAD~ $COMMIT2 refs/heads/prev $ZERO_OID EOF test_expect_success 'push non-branches' ' @@ -90,7 +90,7 @@ test_expect_success 'push non-branches' ' cat >expected <<EOF parent1 repo1 -(delete) $_z40 refs/heads/prev $COMMIT2 +(delete) $ZERO_OID refs/heads/prev $COMMIT2 EOF test_expect_success 'push delete' ' @@ -101,7 +101,7 @@ test_expect_success 'push delete' ' cat >expected <<EOF repo1 repo1 -HEAD $COMMIT3 refs/heads/other $_z40 +HEAD $COMMIT3 refs/heads/other $ZERO_OID EOF test_expect_success 'push to URL' ' diff --git a/t/t5572-pull-submodule.sh b/t/t5572-pull-submodule.sh index 321bd37deb..f916729a12 100755 --- a/t/t5572-pull-submodule.sh +++ b/t/t5572-pull-submodule.sh @@ -132,4 +132,25 @@ test_expect_success 'pull rebase recursing fails with conflicts' ' test_i18ngrep "locally recorded submodule modifications" err ' +test_expect_success 'branch has no merge base with remote-tracking counterpart' ' + rm -rf parent child && + + test_create_repo a-submodule && + test_commit -C a-submodule foo && + + test_create_repo parent && + git -C parent submodule add "$(pwd)/a-submodule" && + git -C parent commit -m foo && + + git clone parent child && + + # Reset master so that it has no merge base with + # refs/remotes/origin/master. + OTHER=$(git -C child commit-tree -m bar \ + $(git -C child rev-parse HEAD^{tree})) && + git -C child reset --hard "$OTHER" && + + git -C child pull --recurse-submodules --rebase +' + test_done diff --git a/t/t5573-pull-verify-signatures.sh b/t/t5573-pull-verify-signatures.sh index 9594e891f4..747775c147 100755 --- a/t/t5573-pull-verify-signatures.sh +++ b/t/t5573-pull-verify-signatures.sh @@ -29,7 +29,7 @@ test_expect_success GPG 'create repositories with signed commits' ' echo 4 >d && git add d && test_tick && git commit -S -m "bad" && git cat-file commit HEAD >raw && - sed -e "s/bad/forged bad/" raw >forged && + sed -e "s/^bad/forged bad/" raw >forged && git hash-object -w -t commit forged >forged.commit && git checkout $(cat forged.commit) ) && diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 8c437bf872..0b62037744 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -628,4 +628,105 @@ test_expect_success 'clone on case-insensitive fs' ' ) ' +partial_clone () { + SERVER="$1" && + URL="$2" && + + rm -rf "$SERVER" client && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" one && + HASH1=$(git hash-object "$SERVER/one.t") && + git -C "$SERVER" revert HEAD && + test_commit -C "$SERVER" two && + HASH2=$(git hash-object "$SERVER/two.t") && + test_config -C "$SERVER" uploadpack.allowfilter 1 && + test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 && + + git clone --filter=blob:limit=0 "$URL" client && + + git -C client fsck && + + # Ensure that unneeded blobs are not inadvertently fetched. + test_config -C client extensions.partialclone "not a remote" && + test_must_fail git -C client cat-file -e "$HASH1" && + + # But this blob was fetched, because clone performs an initial checkout + git -C client cat-file -e "$HASH2" +} + +test_expect_success 'partial clone' ' + partial_clone server "file://$(pwd)/server" +' + +test_expect_success 'partial clone: warn if server does not support object filtering' ' + rm -rf server client && + test_create_repo server && + test_commit -C server one && + + git clone --filter=blob:limit=0 "file://$(pwd)/server" client 2> err && + + test_i18ngrep "filtering not recognized by server" err +' + +test_expect_success 'batch missing blob request during checkout' ' + rm -rf server client && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + + git -C server commit -m x && + echo aa >server/a && + echo bb >server/b && + git -C server add a b && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + + git clone --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure that there is only one negotiation by checking that there is + # only "done" line sent. ("done" marks the end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client checkout HEAD^ && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_expect_success 'batch missing blob request does not inadvertently try to fetch gitlinks' ' + rm -rf server client && + + test_create_repo repo_for_submodule && + test_commit -C repo_for_submodule x && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + git -C server commit -m x && + + echo aa >server/a && + echo bb >server/b && + # Also add a gitlink pointing to an arbitrary repository + git -C server submodule add "$(pwd)/repo_for_submodule" c && + git -C server add a b c && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + + # Make sure that it succeeds + git clone --filter=blob:limit=0 "file://$(pwd)/server" client +' + +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'partial clone using HTTP' ' + partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" +' + +stop_httpd + test_done diff --git a/t/t5608-clone-2gb.sh b/t/t5608-clone-2gb.sh index 191d6d3a78..df822d9a3e 100755 --- a/t/t5608-clone-2gb.sh +++ b/t/t5608-clone-2gb.sh @@ -21,7 +21,7 @@ test_expect_success CLONE_2GB 'setup' ' do printf "Generating blob $i/$blobcount\r" >&2 && printf "blob\nmark :$i\ndata $blobsize\n" && - #test-genrandom $i $blobsize && + #test-tool genrandom $i $blobsize && printf "%-${blobsize}s" $i && echo "M 100644 :$i $i" >> commit i=$(($i+1)) || diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh new file mode 100755 index 0000000000..44d8e80171 --- /dev/null +++ b/t/t5616-partial-clone.sh @@ -0,0 +1,221 @@ +#!/bin/sh + +test_description='git partial clone' + +. ./test-lib.sh + +# create a normal "src" repo where we can later create new commits. +# expect_1.oids will contain a list of the OIDs of all blobs. +test_expect_success 'setup normal src repo' ' + echo "{print \$1}" >print_1.awk && + echo "{print \$2}" >print_2.awk && + + git init src && + for n in 1 2 3 4 + do + echo "This is file: $n" > src/file.$n.txt + git -C src add file.$n.txt + git -C src commit -m "file $n" + git -C src ls-files -s file.$n.txt >>temp + done && + awk -f print_2.awk <temp | sort >expect_1.oids && + test_line_count = 4 expect_1.oids +' + +# bare clone "src" giving "srv.bare" for use as our server. +test_expect_success 'setup bare clone for server' ' + git clone --bare "file://$(pwd)/src" srv.bare && + git -C srv.bare config --local uploadpack.allowfilter 1 && + git -C srv.bare config --local uploadpack.allowanysha1inwant 1 +' + +# do basic partial clone from "srv.bare" +# confirm we are missing all of the known blobs. +# confirm partial clone was registered in the local config. +test_expect_success 'do partial clone 1' ' + git clone --no-checkout --filter=blob:none "file://$(pwd)/srv.bare" pc1 && + git -C pc1 rev-list HEAD --quiet --objects --missing=print \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed.oids && + test_cmp expect_1.oids observed.oids && + test "$(git -C pc1 config --local core.repositoryformatversion)" = "1" && + test "$(git -C pc1 config --local extensions.partialclone)" = "origin" && + test "$(git -C pc1 config --local core.partialclonefilter)" = "blob:none" +' + +# checkout master to force dynamic object fetch of blobs at HEAD. +test_expect_success 'verify checkout with dynamic object fetch' ' + git -C pc1 rev-list HEAD --quiet --objects --missing=print >observed && + test_line_count = 4 observed && + git -C pc1 checkout master && + git -C pc1 rev-list HEAD --quiet --objects --missing=print >observed && + test_line_count = 0 observed +' + +# create new commits in "src" repo to establish a blame history on file.1.txt +# and push to "srv.bare". +test_expect_success 'push new commits to server' ' + git -C src remote add srv "file://$(pwd)/srv.bare" && + for x in a b c d e + do + echo "Mod file.1.txt $x" >>src/file.1.txt + git -C src add file.1.txt + git -C src commit -m "mod $x" + done && + git -C src blame master -- file.1.txt >expect.blame && + git -C src push -u srv master +' + +# (partial) fetch in the partial clone repo from the promisor remote. +# verify that fetch inherited the filter-spec from the config and DOES NOT +# have the new blobs. +test_expect_success 'partial fetch inherits filter settings' ' + git -C pc1 fetch origin && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 5 observed +' + +# force dynamic object fetch using diff. +# we should only get 1 new blob (for the file in origin/master). +test_expect_success 'verify diff causes dynamic object fetch' ' + git -C pc1 diff master..origin/master -- file.1.txt && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 4 observed +' + +# force full dynamic object fetch of the file's history using blame. +# we should get the intermediate blobs for the file. +test_expect_success 'verify blame causes dynamic object fetch' ' + git -C pc1 blame origin/master -- file.1.txt >observed.blame && + test_cmp expect.blame observed.blame && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 0 observed +' + +# create new commits in "src" repo to establish a history on file.2.txt +# and push to "srv.bare". +test_expect_success 'push new commits to server for file.2.txt' ' + for x in a b c d e f + do + echo "Mod file.2.txt $x" >>src/file.2.txt + git -C src add file.2.txt + git -C src commit -m "mod $x" + done && + git -C src push -u srv master +' + +# Do FULL fetch by disabling inherited filter-spec using --no-filter. +# Verify we have all the new blobs. +test_expect_success 'override inherited filter-spec using --no-filter' ' + git -C pc1 fetch --no-filter origin && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print >observed && + test_line_count = 0 observed +' + +# create new commits in "src" repo to establish a history on file.3.txt +# and push to "srv.bare". +test_expect_success 'push new commits to server for file.3.txt' ' + for x in a b c d e f + do + echo "Mod file.3.txt $x" >>src/file.3.txt + git -C src add file.3.txt + git -C src commit -m "mod $x" + done && + git -C src push -u srv master +' + +# Do a partial fetch and then try to manually fetch the missing objects. +# This can be used as the basis of a pre-command hook to bulk fetch objects +# perhaps combined with a command in dry-run mode. +test_expect_success 'manual prefetch of missing objects' ' + git -C pc1 fetch --filter=blob:none origin && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed.oids && + test_line_count = 6 observed.oids && + git -C pc1 fetch-pack --stdin "file://$(pwd)/srv.bare" <observed.oids && + git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \ + | awk -f print_1.awk \ + | sed "s/?//" \ + | sort >observed.oids && + test_line_count = 0 observed.oids +' + +test_expect_success 'partial clone with transfer.fsckobjects=1 uses index-pack --fsck-objects' ' + git init src && + test_commit -C src x && + test_config -C src uploadpack.allowfilter 1 && + test_config -C src uploadpack.allowanysha1inwant 1 && + + GIT_TRACE="$(pwd)/trace" git -c transfer.fsckobjects=1 \ + clone --filter="blob:none" "file://$(pwd)/src" dst && + grep "git index-pack.*--fsck-objects" trace +' + +test_expect_success 'partial clone fetches blobs pointed to by refs even if normally filtered out' ' + rm -rf src dst && + git init src && + test_commit -C src x && + test_config -C src uploadpack.allowfilter 1 && + test_config -C src uploadpack.allowanysha1inwant 1 && + + # Create a tag pointing to a blob. + BLOB=$(echo blob-contents | git -C src hash-object --stdin -w) && + git -C src tag myblob "$BLOB" && + + git clone --filter="blob:none" "file://$(pwd)/src" dst 2>err && + ! grep "does not point to a valid object" err && + git -C dst fsck +' + +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +# Converts bytes into a form suitable for inclusion in a sed command. For +# example, "printf 'ab\r\n' | hex_unpack" results in '\x61\x62\x0d\x0a'. +sed_escape () { + perl -e '$/ = undef; $input = <>; print unpack("H2" x length($input), $input)' | + sed 's/\(..\)/\\x\1/g' +} + +test_expect_success 'upon cloning, check that all refs point to objects' ' + SERVER="$HTTPD_DOCUMENT_ROOT_PATH/server" && + rm -rf "$SERVER" repo && + test_create_repo "$SERVER" && + test_commit -C "$SERVER" foo && + test_config -C "$SERVER" uploadpack.allowfilter 1 && + test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 && + + # Create a tag pointing to a blob. + BLOB=$(echo blob-contents | git -C "$SERVER" hash-object --stdin -w) && + git -C "$SERVER" tag myblob "$BLOB" && + + # Craft a packfile not including that blob. + git -C "$SERVER" rev-parse HEAD | + git -C "$SERVER" pack-objects --stdout >incomplete.pack && + + # Replace the existing packfile with the crafted one. The protocol + # requires that the packfile be sent in sideband 1, hence the extra + # \x01 byte at the beginning. + printf "1,/packfile/!c %04x\\\\x01%s0000" \ + "$(($(wc -c <incomplete.pack) + 5))" \ + "$(sed_escape <incomplete.pack)" \ + >"$HTTPD_ROOT_PATH/one-time-sed" && + + # Use protocol v2 because the sed command looks for the "packfile" + # section header. + test_config -C "$SERVER" protocol.version 2 && + test_must_fail git -c protocol.version=2 clone \ + --filter=blob:none $HTTPD_URL/one_time_sed/server repo 2>err && + + grep "did not send all necessary objects" err && + + # Ensure that the one-time-sed script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-sed" +' + +stop_httpd + +test_done diff --git a/t/t5701-git-serve.sh b/t/t5701-git-serve.sh new file mode 100755 index 0000000000..75ec79e6cb --- /dev/null +++ b/t/t5701-git-serve.sh @@ -0,0 +1,211 @@ +#!/bin/sh + +test_description='test git-serve and server commands' + +. ./test-lib.sh + +test_expect_success 'test capability advertisement' ' + cat >expect <<-EOF && + version 2 + agent=git/$(git version | cut -d" " -f3) + ls-refs + fetch=shallow + server-option + 0000 + EOF + + git serve --advertise-capabilities >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'stateless-rpc flag does not list capabilities' ' + # Empty request + test-pkt-line pack >in <<-EOF && + 0000 + EOF + git serve --stateless-rpc >out <in && + test_must_be_empty out && + + # EOF + git serve --stateless-rpc >out && + test_must_be_empty out +' + +test_expect_success 'request invalid capability' ' + test-pkt-line pack >in <<-EOF && + foobar + 0000 + EOF + test_must_fail git serve --stateless-rpc 2>err <in && + test_i18ngrep "unknown capability" err +' + +test_expect_success 'request with no command' ' + test-pkt-line pack >in <<-EOF && + agent=git/test + 0000 + EOF + test_must_fail git serve --stateless-rpc 2>err <in && + test_i18ngrep "no command requested" err +' + +test_expect_success 'request invalid command' ' + test-pkt-line pack >in <<-EOF && + command=foo + agent=git/test + 0000 + EOF + test_must_fail git serve --stateless-rpc 2>err <in && + test_i18ngrep "invalid command" err +' + +# Test the basics of ls-refs +# +test_expect_success 'setup some refs and tags' ' + test_commit one && + git branch dev master && + test_commit two && + git symbolic-ref refs/heads/release refs/heads/master && + git tag -a -m "annotated tag" annotated-tag +' + +test_expect_success 'basics of ls-refs' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse HEAD) HEAD + $(git rev-parse refs/heads/dev) refs/heads/dev + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/heads/release) refs/heads/release + $(git rev-parse refs/tags/annotated-tag) refs/tags/annotated-tag + $(git rev-parse refs/tags/one) refs/tags/one + $(git rev-parse refs/tags/two) refs/tags/two + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'basic ref-prefixes' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + ref-prefix refs/heads/master + ref-prefix refs/tags/one + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/tags/one) refs/tags/one + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'refs/heads prefix' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + ref-prefix refs/heads/ + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/heads/dev) refs/heads/dev + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/heads/release) refs/heads/release + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'peel parameter' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + peel + ref-prefix refs/tags/ + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/tags/annotated-tag) refs/tags/annotated-tag peeled:$(git rev-parse refs/tags/annotated-tag^{}) + $(git rev-parse refs/tags/one) refs/tags/one + $(git rev-parse refs/tags/two) refs/tags/two + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'symrefs parameter' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + symrefs + ref-prefix refs/heads/ + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/heads/dev) refs/heads/dev + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/heads/release) refs/heads/release symref-target:refs/heads/master + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'sending server-options' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + server-option=hello + server-option=world + 0001 + ref-prefix HEAD + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse HEAD) HEAD + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'unexpected lines are not allowed in fetch request' ' + git init server && + + test-pkt-line pack >in <<-EOF && + command=fetch + 0001 + this-is-not-a-command + 0000 + EOF + + test_must_fail git -C server serve --stateless-rpc <in >/dev/null 2>err && + grep "unexpected line: .this-is-not-a-command." err +' + +test_done diff --git a/t/t5702-protocol-v2.sh b/t/t5702-protocol-v2.sh new file mode 100755 index 0000000000..a4fe6508bd --- /dev/null +++ b/t/t5702-protocol-v2.sh @@ -0,0 +1,431 @@ +#!/bin/sh + +test_description='test git wire-protocol version 2' + +TEST_NO_CREATE_REPO=1 + +. ./test-lib.sh + +# Test protocol v2 with 'git://' transport +# +. "$TEST_DIRECTORY"/lib-git-daemon.sh +start_git_daemon --export-all --enable=receive-pack +daemon_parent=$GIT_DAEMON_DOCUMENT_ROOT_PATH/parent + +test_expect_success 'create repo to be served by git-daemon' ' + git init "$daemon_parent" && + test_commit -C "$daemon_parent" one +' + +test_expect_success 'list refs with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote --symref "$GIT_DAEMON_URL/parent" >actual && + + # Client requested to use protocol v2 + grep "git> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "git< version 2" log && + + git ls-remote --symref "$GIT_DAEMON_URL/parent" >expect && + test_cmp actual expect +' + +test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote "$GIT_DAEMON_URL/parent" master >actual && + + cat >expect <<-EOF && + $(git -C "$daemon_parent" rev-parse refs/heads/master)$(printf "\t")refs/heads/master + EOF + + test_cmp actual expect +' + +test_expect_success 'clone with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + clone "$GIT_DAEMON_URL/parent" daemon_child && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "clone> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "clone< version 2" log +' + +test_expect_success 'fetch with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C "$daemon_parent" two && + + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + fetch && + + git -C daemon_child log -1 --format=%s origin/master >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "fetch> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "fetch< version 2" log +' + +test_expect_success 'pull with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + pull && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "fetch> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "fetch< version 2" log +' + +test_expect_success 'push with git:// and a config of v2 does not request v2' ' + test_when_finished "rm -f log" && + + # Till v2 for push is designed, make sure that if a client has + # protocol.version configured to use v2, that the client instead falls + # back and uses v0. + + test_commit -C daemon_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + push origin HEAD:client_branch && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + ! grep "push> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + ! grep "push< version 2" log +' + +stop_git_daemon + +# Test protocol v2 with 'file://' transport +# +test_expect_success 'create repo to be served by file:// transport' ' + git init file_parent && + test_commit -C file_parent one +' + +test_expect_success 'list refs with file:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote --symref "file://$(pwd)/file_parent" >actual && + + # Server responded using protocol v2 + grep "git< version 2" log && + + git ls-remote --symref "file://$(pwd)/file_parent" >expect && + test_cmp actual expect +' + +test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote "file://$(pwd)/file_parent" master >actual && + + cat >expect <<-EOF && + $(git -C file_parent rev-parse refs/heads/master)$(printf "\t")refs/heads/master + EOF + + test_cmp actual expect +' + +test_expect_success 'server-options are sent when using ls-remote' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote -o hello -o world "file://$(pwd)/file_parent" master >actual && + + cat >expect <<-EOF && + $(git -C file_parent rev-parse refs/heads/master)$(printf "\t")refs/heads/master + EOF + + test_cmp actual expect && + grep "server-option=hello" log && + grep "server-option=world" log +' + + +test_expect_success 'clone with file:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + clone "file://$(pwd)/file_parent" file_child && + + git -C file_child log -1 --format=%s >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v2 + grep "clone< version 2" log +' + +test_expect_success 'fetch with file:// using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C file_parent two && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch origin && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v2 + grep "fetch< version 2" log +' + +test_expect_success 'ref advertisment is filtered during fetch using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C file_parent three && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch origin master && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + ! grep "refs/tags/one" log && + ! grep "refs/tags/two" log && + ! grep "refs/tags/three" log +' + +test_expect_success 'server-options are sent when fetching' ' + test_when_finished "rm -f log" && + + test_commit -C file_parent four && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch -o hello -o world origin master && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + grep "server-option=hello" log && + grep "server-option=world" log +' + +test_expect_success 'upload-pack respects config using protocol v2' ' + git init server && + write_script server/.git/hook <<-\EOF && + touch hookout + "$@" + EOF + test_commit -C server one && + + test_config_global uploadpack.packobjectshook ./hook && + test_path_is_missing server/.git/hookout && + git -c protocol.version=2 clone "file://$(pwd)/server" client && + test_path_is_file server/.git/hookout +' + +test_expect_success 'setup filter tests' ' + rm -rf server client && + git init server && + + # 1 commit to create a file, and 1 commit to modify it + test_commit -C server message1 a.txt && + test_commit -C server message2 a.txt && + git -C server config protocol.version 2 && + git -C server config uploadpack.allowfilter 1 && + git -C server config uploadpack.allowanysha1inwant 1 && + git -C server config protocol.version 2 +' + +test_expect_success 'partial clone' ' + GIT_TRACE_PACKET="$(pwd)/trace" git -c protocol.version=2 \ + clone --filter=blob:none "file://$(pwd)/server" client && + grep "version 2" trace && + + # Ensure that the old version of the file is missing + git -C client rev-list master --quiet --objects --missing=print \ + >observed.oids && + grep "$(git -C server rev-parse message1:a.txt)" observed.oids && + + # Ensure that client passes fsck + git -C client fsck +' + +test_expect_success 'dynamically fetch missing object' ' + rm "$(pwd)/trace" && + GIT_TRACE_PACKET="$(pwd)/trace" git -C client -c protocol.version=2 \ + cat-file -p $(git -C server rev-parse message1:a.txt) && + grep "version 2" trace +' + +test_expect_success 'partial fetch' ' + rm -rf client "$(pwd)/trace" && + git init client && + SERVER="file://$(pwd)/server" && + test_config -C client extensions.partialClone "$SERVER" && + + GIT_TRACE_PACKET="$(pwd)/trace" git -C client -c protocol.version=2 \ + fetch --filter=blob:none "$SERVER" master:refs/heads/other && + grep "version 2" trace && + + # Ensure that the old version of the file is missing + git -C client rev-list other --quiet --objects --missing=print \ + >observed.oids && + grep "$(git -C server rev-parse message1:a.txt)" observed.oids && + + # Ensure that client passes fsck + git -C client fsck +' + +test_expect_success 'do not advertise filter if not configured to do so' ' + SERVER="file://$(pwd)/server" && + + rm "$(pwd)/trace" && + git -C server config uploadpack.allowfilter 1 && + GIT_TRACE_PACKET="$(pwd)/trace" git -c protocol.version=2 \ + ls-remote "$SERVER" && + grep "fetch=.*filter" trace && + + rm "$(pwd)/trace" && + git -C server config uploadpack.allowfilter 0 && + GIT_TRACE_PACKET="$(pwd)/trace" git -c protocol.version=2 \ + ls-remote "$SERVER" && + grep "fetch=" trace >fetch_capabilities && + ! grep filter fetch_capabilities +' + +test_expect_success 'partial clone warns if filter is not advertised' ' + rm -rf client && + git -C server config uploadpack.allowfilter 0 && + git -c protocol.version=2 \ + clone --filter=blob:none "file://$(pwd)/server" client 2>err && + test_i18ngrep "filtering not recognized by server, ignoring" err +' + +test_expect_success 'even with handcrafted request, filter does not work if not advertised' ' + git -C server config uploadpack.allowfilter 0 && + + # Custom request that tries to filter even though it is not advertised. + test-pkt-line pack >in <<-EOF && + command=fetch + 0001 + want $(git -C server rev-parse master) + filter blob:none + 0000 + EOF + + test_must_fail git -C server serve --stateless-rpc <in >/dev/null 2>err && + grep "unexpected line: .filter blob:none." err && + + # Exercise to ensure that if advertised, filter works + git -C server config uploadpack.allowfilter 1 && + git -C server serve --stateless-rpc <in >/dev/null +' + +test_expect_success 'default refspec is used to filter ref when fetchcing' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch origin && + + git -C file_child log -1 --format=%s three >actual && + git -C file_parent log -1 --format=%s three >expect && + test_cmp expect actual && + + grep "ref-prefix refs/heads/" log && + grep "ref-prefix refs/tags/" log +' + +# Test protocol v2 with 'http://' transport +# +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'create repo to be served by http:// transport' ' + git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config http.receivepack true && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" one +' + +test_expect_success 'clone with http:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" GIT_TRACE_CURL="$(pwd)/log" git -c protocol.version=2 \ + clone "$HTTPD_URL/smart/http_parent" http_child && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "Git-Protocol: version=2" log && + # Server responded using protocol v2 + grep "git< version 2" log +' + +test_expect_success 'fetch with http:// using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two && + + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + fetch && + + git -C http_child log -1 --format=%s origin/master >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v2 + grep "git< version 2" log +' + +test_expect_success 'push with http:// and a config of v2 does not request v2' ' + test_when_finished "rm -f log" && + # Till v2 for push is designed, make sure that if a client has + # protocol.version configured to use v2, that the client instead falls + # back and uses v0. + + test_commit -C http_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + push origin HEAD:client_branch && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Client didnt request to use protocol v2 + ! grep "Git-Protocol: version=2" log && + # Server didnt respond using protocol v2 + ! grep "git< version 2" log +' + + +stop_httpd + +test_done diff --git a/t/t5703-upload-pack-ref-in-want.sh b/t/t5703-upload-pack-ref-in-want.sh new file mode 100755 index 0000000000..a73c55a47e --- /dev/null +++ b/t/t5703-upload-pack-ref-in-want.sh @@ -0,0 +1,377 @@ +#!/bin/sh + +test_description='upload-pack ref-in-want' + +. ./test-lib.sh + +get_actual_refs () { + sed -n -e '/wanted-refs/,/0001/{ + /wanted-refs/d + /0001/d + p + }' <out | test-pkt-line unpack >actual_refs +} + +get_actual_commits () { + sed -n -e '/packfile/,/0000/{ + /packfile/d + p + }' <out | test-pkt-line unpack-sideband >o.pack && + git index-pack o.pack && + git verify-pack -v o.idx | grep commit | cut -c-40 | sort >actual_commits +} + +check_output () { + get_actual_refs && + test_cmp expected_refs actual_refs && + get_actual_commits && + test_cmp expected_commits actual_commits +} + +# c(o/foo) d(o/bar) +# \ / +# b e(baz) f(master) +# \__ | __/ +# \ | / +# a +test_expect_success 'setup repository' ' + test_commit a && + git checkout -b o/foo && + test_commit b && + test_commit c && + git checkout -b o/bar b && + test_commit d && + git checkout -b baz a && + test_commit e && + git checkout master && + test_commit f +' + +test_expect_success 'config controls ref-in-want advertisement' ' + git serve --advertise-capabilities >out && + ! grep -a ref-in-want out && + + git config uploadpack.allowRefInWant false && + git serve --advertise-capabilities >out && + ! grep -a ref-in-want out && + + git config uploadpack.allowRefInWant true && + git serve --advertise-capabilities >out && + grep -a ref-in-want out +' + +test_expect_success 'invalid want-ref line' ' + test-pkt-line pack >in <<-EOF && + command=fetch + 0001 + no-progress + want-ref refs/heads/non-existent + done + 0000 + EOF + + test_must_fail git serve --stateless-rpc 2>out <in && + grep "unknown ref" out +' + +test_expect_success 'basic want-ref' ' + cat >expected_refs <<-EOF && + $(git rev-parse f) refs/heads/master + EOF + git rev-parse f | sort >expected_commits && + + test-pkt-line pack >in <<-EOF && + command=fetch + 0001 + no-progress + want-ref refs/heads/master + have $(git rev-parse a) + done + 0000 + EOF + + git serve --stateless-rpc >out <in && + check_output +' + +test_expect_success 'multiple want-ref lines' ' + cat >expected_refs <<-EOF && + $(git rev-parse c) refs/heads/o/foo + $(git rev-parse d) refs/heads/o/bar + EOF + git rev-parse c d | sort >expected_commits && + + test-pkt-line pack >in <<-EOF && + command=fetch + 0001 + no-progress + want-ref refs/heads/o/foo + want-ref refs/heads/o/bar + have $(git rev-parse b) + done + 0000 + EOF + + git serve --stateless-rpc >out <in && + check_output +' + +test_expect_success 'mix want and want-ref' ' + cat >expected_refs <<-EOF && + $(git rev-parse f) refs/heads/master + EOF + git rev-parse e f | sort >expected_commits && + + test-pkt-line pack >in <<-EOF && + command=fetch + 0001 + no-progress + want-ref refs/heads/master + want $(git rev-parse e) + have $(git rev-parse a) + done + 0000 + EOF + + git serve --stateless-rpc >out <in && + check_output +' + +test_expect_success 'want-ref with ref we already have commit for' ' + cat >expected_refs <<-EOF && + $(git rev-parse c) refs/heads/o/foo + EOF + >expected_commits && + + test-pkt-line pack >in <<-EOF && + command=fetch + 0001 + no-progress + want-ref refs/heads/o/foo + have $(git rev-parse c) + done + 0000 + EOF + + git serve --stateless-rpc >out <in && + check_output +' + +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +REPO="$HTTPD_DOCUMENT_ROOT_PATH/repo" +LOCAL_PRISTINE="$(pwd)/local_pristine" + +test_expect_success 'setup repos for change-while-negotiating test' ' + ( + git init "$REPO" && + cd "$REPO" && + >.git/git-daemon-export-ok && + test_commit m1 && + git tag -d m1 && + + # Local repo with many commits (so that negotiation will take + # more than 1 request/response pair) + git clone "http://127.0.0.1:$LIB_HTTPD_PORT/smart/repo" "$LOCAL_PRISTINE" && + cd "$LOCAL_PRISTINE" && + git checkout -b side && + for i in $(seq 1 33); do test_commit s$i; done && + + # Add novel commits to upstream + git checkout master && + cd "$REPO" && + test_commit m2 && + test_commit m3 && + git tag -d m2 m3 + ) && + git -C "$LOCAL_PRISTINE" remote set-url origin "http://127.0.0.1:$LIB_HTTPD_PORT/one_time_sed/repo" && + git -C "$LOCAL_PRISTINE" config protocol.version 2 +' + +inconsistency () { + # Simulate that the server initially reports $2 as the ref + # corresponding to $1, and after that, $1 as the ref corresponding to + # $1. This corresponds to the real-life situation where the server's + # repository appears to change during negotiation, for example, when + # different servers in a load-balancing arrangement serve (stateless) + # RPCs during a single negotiation. + printf "s/%s/%s/" \ + $(git -C "$REPO" rev-parse $1 | tr -d "\n") \ + $(git -C "$REPO" rev-parse $2 | tr -d "\n") \ + >"$HTTPD_ROOT_PATH/one-time-sed" +} + +test_expect_success 'server is initially ahead - no ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant false && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master 1234567890123456789012345678901234567890 && + test_must_fail git -C local fetch 2>err && + grep "ERR upload-pack: not our ref" err +' + +test_expect_success 'server is initially ahead - ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant true && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master 1234567890123456789012345678901234567890 && + git -C local fetch && + + git -C "$REPO" rev-parse --verify master >expected && + git -C local rev-parse --verify refs/remotes/origin/master >actual && + test_cmp expected actual +' + +test_expect_success 'server is initially behind - no ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant false && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master "master^" && + git -C local fetch && + + git -C "$REPO" rev-parse --verify "master^" >expected && + git -C local rev-parse --verify refs/remotes/origin/master >actual && + test_cmp expected actual +' + +test_expect_success 'server is initially behind - ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant true && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master "master^" && + git -C local fetch && + + git -C "$REPO" rev-parse --verify "master" >expected && + git -C local rev-parse --verify refs/remotes/origin/master >actual && + test_cmp expected actual +' + +test_expect_success 'server loses a ref - ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant true && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + echo "s/master/raster/" >"$HTTPD_ROOT_PATH/one-time-sed" && + test_must_fail git -C local fetch 2>err && + + grep "ERR unknown ref refs/heads/raster" err +' + +stop_httpd + +REPO="$(pwd)/repo" +LOCAL_PRISTINE="$(pwd)/local_pristine" + +# $REPO +# c(o/foo) d(o/bar) +# \ / +# b e(baz) f(master) +# \__ | __/ +# \ | / +# a +# +# $LOCAL_PRISTINE +# s32(side) +# | +# . +# . +# | +# a(master) +test_expect_success 'setup repos for fetching with ref-in-want tests' ' + ( + git init "$REPO" && + cd "$REPO" && + test_commit a && + + # Local repo with many commits (so that negotiation will take + # more than 1 request/response pair) + rm -rf "$LOCAL_PRISTINE" && + git clone "file://$REPO" "$LOCAL_PRISTINE" && + cd "$LOCAL_PRISTINE" && + git checkout -b side && + for i in $(seq 1 33); do test_commit s$i; done && + + # Add novel commits to upstream + git checkout master && + cd "$REPO" && + git checkout -b o/foo && + test_commit b && + test_commit c && + git checkout -b o/bar b && + test_commit d && + git checkout -b baz a && + test_commit e && + git checkout master && + test_commit f + ) && + git -C "$REPO" config uploadpack.allowRefInWant true && + git -C "$LOCAL_PRISTINE" config protocol.version 2 +' + +test_expect_success 'fetching with exact OID' ' + test_when_finished "rm -f log" && + + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + GIT_TRACE_PACKET="$(pwd)/log" git -C local fetch origin \ + $(git -C "$REPO" rev-parse d):refs/heads/actual && + + git -C "$REPO" rev-parse "d" >expected && + git -C local rev-parse refs/heads/actual >actual && + test_cmp expected actual && + grep "want $(git -C "$REPO" rev-parse d)" log +' + +test_expect_success 'fetching multiple refs' ' + test_when_finished "rm -f log" && + + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + GIT_TRACE_PACKET="$(pwd)/log" git -C local fetch origin master baz && + + git -C "$REPO" rev-parse "master" "baz" >expected && + git -C local rev-parse refs/remotes/origin/master refs/remotes/origin/baz >actual && + test_cmp expected actual && + grep "want-ref refs/heads/master" log && + grep "want-ref refs/heads/baz" log +' + +test_expect_success 'fetching ref and exact OID' ' + test_when_finished "rm -f log" && + + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + GIT_TRACE_PACKET="$(pwd)/log" git -C local fetch origin \ + master $(git -C "$REPO" rev-parse b):refs/heads/actual && + + git -C "$REPO" rev-parse "master" "b" >expected && + git -C local rev-parse refs/remotes/origin/master refs/heads/actual >actual && + test_cmp expected actual && + grep "want $(git -C "$REPO" rev-parse b)" log && + grep "want-ref refs/heads/master" log +' + +test_expect_success 'fetching with wildcard that does not match any refs' ' + test_when_finished "rm -f log" && + + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + git -C local fetch origin refs/heads/none*:refs/heads/* >out && + test_must_be_empty out +' + +test_expect_success 'fetching with wildcard that matches multiple refs' ' + test_when_finished "rm -f log" && + + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + GIT_TRACE_PACKET="$(pwd)/log" git -C local fetch origin refs/heads/o*:refs/heads/o* && + + git -C "$REPO" rev-parse "o/foo" "o/bar" >expected && + git -C local rev-parse "o/foo" "o/bar" >actual && + test_cmp expected actual && + grep "want-ref refs/heads/o/foo" log && + grep "want-ref refs/heads/o/bar" log +' + +test_done diff --git a/t/t6001-rev-list-graft.sh b/t/t6001-rev-list-graft.sh index 05ddc69cf2..7504ba4751 100755 --- a/t/t6001-rev-list-graft.sh +++ b/t/t6001-rev-list-graft.sh @@ -110,4 +110,13 @@ do " done + +test_expect_success 'show advice that grafts are deprecated' ' + git show HEAD 2>err && + test_i18ngrep "git replace" err && + test_config advice.graftFileDeprecated false && + git show HEAD 2>err && + test_i18ngrep ! "git replace" err +' + test_done diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index 98be78b4a2..ec42c2f779 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -447,8 +447,8 @@ test_expect_success '--abbrev' ' git log -1 --format="%h %h %h" HEAD >actual1 && git log -1 --abbrev=5 --format="%h %h %h" HEAD >actual2 && git log -1 --abbrev=5 --format="%H %H %H" HEAD >actual3 && - sed -e "s/$_x40/LONG/g" -e "s/$_x05/SHORT/g" <actual2 >fuzzy2 && - sed -e "s/$_x40/LONG/g" -e "s/$_x05/SHORT/g" <actual3 >fuzzy3 && + sed -e "s/$OID_REGEX/LONG/g" -e "s/$_x05/SHORT/g" <actual2 >fuzzy2 && + sed -e "s/$OID_REGEX/LONG/g" -e "s/$_x05/SHORT/g" <actual3 >fuzzy3 && test_cmp expect2 fuzzy2 && test_cmp expect3 fuzzy3 && ! test_cmp actual1 actual2 diff --git a/t/t6010-merge-base.sh b/t/t6010-merge-base.sh index 31db7b5f91..aa2d360ce3 100755 --- a/t/t6010-merge-base.sh +++ b/t/t6010-merge-base.sh @@ -34,7 +34,7 @@ doit () { commit=$(echo $NAME | git commit-tree $T $PARENTS) && - echo $commit >.git/refs/tags/$NAME && + git update-ref "refs/tags/$NAME" "$commit" && echo $commit } diff --git a/t/t6012-rev-list-simplify.sh b/t/t6012-rev-list-simplify.sh index 2a0fbb87b1..b5a1190ffe 100755 --- a/t/t6012-rev-list-simplify.sh +++ b/t/t6012-rev-list-simplify.sh @@ -9,7 +9,7 @@ note () { } unnote () { - git name-rev --tags --stdin | sed -e "s|$_x40 (tags/\([^)]*\)) |\1 |g" + git name-rev --tags --stdin | sed -e "s|$OID_REGEX (tags/\([^)]*\)) |\1 |g" } test_expect_success setup ' diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh index c01f721f13..b760c223c6 100755 --- a/t/t6022-merge-rename.sh +++ b/t/t6022-merge-rename.sh @@ -247,7 +247,7 @@ test_expect_success 'merge of identical changes in a renamed file' ' git reset --hard HEAD^ && git checkout change && GIT_MERGE_VERBOSITY=3 git merge change+rename >out && - test_i18ngrep "^Skipped B" out + test_i18ngrep ! "^Skipped B" out ' test_expect_success 'setup for rename + d/f conflicts' ' @@ -635,10 +635,9 @@ test_expect_success 'setup avoid unnecessary update, normal rename' ' test_expect_success 'avoid unnecessary update, normal rename' ' git checkout -q avoid-unnecessary-update-1^0 && - test-chmtime =1000000000 rename && - test-chmtime -v +0 rename >expect && + test-tool chmtime --get =1000000000 rename >expect && git merge merge-branch-1 && - test-chmtime -v +0 rename >actual && + test-tool chmtime --get rename >actual && test_cmp expect actual # "rename" should have stayed intact ' @@ -668,10 +667,9 @@ test_expect_success 'setup to test avoiding unnecessary update, with D/F conflic test_expect_success 'avoid unnecessary update, with D/F conflict' ' git checkout -q avoid-unnecessary-update-2^0 && - test-chmtime =1000000000 df && - test-chmtime -v +0 df >expect && + test-tool chmtime --get =1000000000 df >expect && git merge merge-branch-2 && - test-chmtime -v +0 df >actual && + test-tool chmtime --get df >actual && test_cmp expect actual # "df" should have stayed intact ' @@ -700,10 +698,9 @@ test_expect_success 'setup avoid unnecessary update, dir->(file,nothing)' ' test_expect_success 'avoid unnecessary update, dir->(file,nothing)' ' git checkout -q master^0 && - test-chmtime =1000000000 df && - test-chmtime -v +0 df >expect && + test-tool chmtime --get =1000000000 df >expect && git merge side && - test-chmtime -v +0 df >actual && + test-tool chmtime --get df >actual && test_cmp expect actual # "df" should have stayed intact ' @@ -730,10 +727,9 @@ test_expect_success 'setup avoid unnecessary update, modify/delete' ' test_expect_success 'avoid unnecessary update, modify/delete' ' git checkout -q master^0 && - test-chmtime =1000000000 file && - test-chmtime -v +0 file >expect && + test-tool chmtime --get =1000000000 file >expect && test_must_fail git merge side && - test-chmtime -v +0 file >actual && + test-tool chmtime --get file >actual && test_cmp expect actual # "file" should have stayed intact ' @@ -759,10 +755,9 @@ test_expect_success 'setup avoid unnecessary update, rename/add-dest' ' test_expect_success 'avoid unnecessary update, rename/add-dest' ' git checkout -q master^0 && - test-chmtime =1000000000 newfile && - test-chmtime -v +0 newfile >expect && + test-tool chmtime --get =1000000000 newfile >expect && git merge side && - test-chmtime -v +0 newfile >actual && + test-tool chmtime --get newfile >actual && test_cmp expect actual # "file" should have stayed intact ' diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index 18aa88b5c0..b5621303d6 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -4,12 +4,6 @@ test_description='recursive merge corner cases involving criss-cross merges' . ./test-lib.sh -get_clean_checkout () { - git reset --hard && - git clean -fdqx && - git checkout "$1" -} - # # L1 L2 # o---o @@ -21,51 +15,66 @@ get_clean_checkout () { # test_expect_success 'setup basic criss-cross + rename with no modifications' ' - ten="0 1 2 3 4 5 6 7 8 9" && - for i in $ten - do - echo line $i in a sample file - done >one && - for i in $ten - do - echo line $i in another sample file - done >two && - git add one two && - test_tick && git commit -m initial && - - git branch L1 && - git checkout -b R1 && - git mv one three && - test_tick && git commit -m R1 && - - git checkout L1 && - git mv two three && - test_tick && git commit -m L1 && - - git checkout L1^0 && - test_tick && git merge -s ours R1 && - git tag L2 && - - git checkout R1^0 && - test_tick && git merge -s ours L1 && - git tag R2 + test_create_repo basic-rename && + ( + cd basic-rename && + + ten="0 1 2 3 4 5 6 7 8 9" && + for i in $ten + do + echo line $i in a sample file + done >one && + for i in $ten + do + echo line $i in another sample file + done >two && + git add one two && + test_tick && git commit -m initial && + + git branch L1 && + git checkout -b R1 && + git mv one three && + test_tick && git commit -m R1 && + + git checkout L1 && + git mv two three && + test_tick && git commit -m L1 && + + git checkout L1^0 && + test_tick && git merge -s ours R1 && + git tag L2 && + + git checkout R1^0 && + test_tick && git merge -s ours L1 && + git tag R2 + ) ' test_expect_success 'merge simple rename+criss-cross with no modifications' ' - git reset --hard && - git checkout L2^0 && - - test_must_fail git merge -s recursive R2^0 && - - test 2 = $(git ls-files -s | wc -l) && - test 2 = $(git ls-files -u | wc -l) && - test 2 = $(git ls-files -o | wc -l) && - - test $(git rev-parse :2:three) = $(git rev-parse L2:three) && - test $(git rev-parse :3:three) = $(git rev-parse R2:three) && - - test $(git rev-parse L2:three) = $(git hash-object three~HEAD) && - test $(git rev-parse R2:three) = $(git hash-object three~R2^0) + ( + cd basic-rename && + + git reset --hard && + git checkout L2^0 && + + test_must_fail git merge -s recursive R2^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >expect \ + L2:three R2:three \ + L2:three R2:three && + git rev-parse >actual \ + :2:three :3:three && + git hash-object >>actual \ + three~HEAD three~R2^0 + test_cmp expect actual + ) ' # @@ -81,58 +90,67 @@ test_expect_success 'merge simple rename+criss-cross with no modifications' ' # test_expect_success 'setup criss-cross + rename merges with basic modification' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - ten="0 1 2 3 4 5 6 7 8 9" && - for i in $ten - do - echo line $i in a sample file - done >one && - for i in $ten - do - echo line $i in another sample file - done >two && - git add one two && - test_tick && git commit -m initial && - - git branch L1 && - git checkout -b R1 && - git mv one three && - echo more >>two && - git add two && - test_tick && git commit -m R1 && - - git checkout L1 && - git mv two three && - test_tick && git commit -m L1 && - - git checkout L1^0 && - test_tick && git merge -s ours R1 && - git tag L2 && - - git checkout R1^0 && - test_tick && git merge -s ours L1 && - git tag R2 + test_create_repo rename-modify && + ( + cd rename-modify && + + ten="0 1 2 3 4 5 6 7 8 9" && + for i in $ten + do + echo line $i in a sample file + done >one && + for i in $ten + do + echo line $i in another sample file + done >two && + git add one two && + test_tick && git commit -m initial && + + git branch L1 && + git checkout -b R1 && + git mv one three && + echo more >>two && + git add two && + test_tick && git commit -m R1 && + + git checkout L1 && + git mv two three && + test_tick && git commit -m L1 && + + git checkout L1^0 && + test_tick && git merge -s ours R1 && + git tag L2 && + + git checkout R1^0 && + test_tick && git merge -s ours L1 && + git tag R2 + ) ' test_expect_success 'merge criss-cross + rename merges with basic modification' ' - git reset --hard && - git checkout L2^0 && - - test_must_fail git merge -s recursive R2^0 && - - test 2 = $(git ls-files -s | wc -l) && - test 2 = $(git ls-files -u | wc -l) && - test 2 = $(git ls-files -o | wc -l) && - - test $(git rev-parse :2:three) = $(git rev-parse L2:three) && - test $(git rev-parse :3:three) = $(git rev-parse R2:three) && - - test $(git rev-parse L2:three) = $(git hash-object three~HEAD) && - test $(git rev-parse R2:three) = $(git hash-object three~R2^0) + ( + cd rename-modify && + + git checkout L2^0 && + + test_must_fail git merge -s recursive R2^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >expect \ + L2:three R2:three \ + L2:three R2:three && + git rev-parse >actual \ + :2:three :3:three && + git hash-object >>actual \ + three~HEAD three~R2^0 + test_cmp expect actual + ) ' # @@ -156,64 +174,74 @@ test_expect_success 'merge criss-cross + rename merges with basic modification' # test_expect_success 'setup differently handled merges of rename/add conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "0\n1\n2\n3\n4\n5\n6\n7\n8\n9\n" >a && - git add a && - test_tick && git commit -m A && - - git branch B && - git checkout -b C && - echo 10 >>a && - echo "other content" >>new_a && - git add a new_a && - test_tick && git commit -m C && - - git checkout B && - git mv a new_a && - test_tick && git commit -m B && - - git checkout B^0 && - test_must_fail git merge C && - git clean -f && - test_tick && git commit -m D && - git tag D && - - git checkout C^0 && - test_must_fail git merge B && - rm new_a~HEAD new_a && - printf "Incorrectly merged content" >>new_a && - git add -u && - test_tick && git commit -m E && - git tag E + test_create_repo rename-add && + ( + cd rename-add && + + printf "0\n1\n2\n3\n4\n5\n6\n7\n8\n9\n" >a && + git add a && + test_tick && git commit -m A && + + git branch B && + git checkout -b C && + echo 10 >>a && + echo "other content" >>new_a && + git add a new_a && + test_tick && git commit -m C && + + git checkout B && + git mv a new_a && + test_tick && git commit -m B && + + git checkout B^0 && + test_must_fail git merge C && + git clean -f && + test_tick && git commit -m D && + git tag D && + + git checkout C^0 && + test_must_fail git merge B && + rm new_a~HEAD new_a && + printf "Incorrectly merged content" >>new_a && + git add -u && + test_tick && git commit -m E && + git tag E + ) ' test_expect_success 'git detects differently handled merges conflict' ' - git reset --hard && - git checkout D^0 && - - test_must_fail git merge -s recursive E^0 && - - test 3 = $(git ls-files -s | wc -l) && - test 3 = $(git ls-files -u | wc -l) && - test 0 = $(git ls-files -o | wc -l) && - - test $(git rev-parse :2:new_a) = $(git rev-parse D:new_a) && - test $(git rev-parse :3:new_a) = $(git rev-parse E:new_a) && - - git cat-file -p B:new_a >>merged && - git cat-file -p C:new_a >>merge-me && - >empty && - test_must_fail git merge-file \ - -L "Temporary merge branch 2" \ - -L "" \ - -L "Temporary merge branch 1" \ - merged empty merge-me && - sed -e "s/^\([<=>]\)/\1\1\1/" merged >merged-internal && - test $(git rev-parse :1:new_a) = $(git hash-object merged-internal) + ( + cd rename-add && + + git checkout D^0 && + + test_must_fail git merge -s recursive E^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + D:new_a E:new_a && + git rev-parse >actual \ + :2:new_a :3:new_a && + test_cmp expect actual + + git cat-file -p B:new_a >ours && + git cat-file -p C:new_a >theirs && + >empty && + test_must_fail git merge-file \ + -L "Temporary merge branch 2" \ + -L "" \ + -L "Temporary merge branch 1" \ + ours empty theirs && + sed -e "s/^\([<=>]\)/\1\1\1/" ours >expect && + git cat-file -p :1:new_a >actual && + test_cmp expect actual + ) ' # @@ -236,67 +264,85 @@ test_expect_success 'git detects differently handled merges conflict' ' # Merging commits D & E should result in modify/delete conflict. test_expect_success 'setup criss-cross + modify/delete resolved differently' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - echo A >file && - git add file && - test_tick && - git commit -m A && - - git branch B && - git checkout -b C && - git rm file && - test_tick && - git commit -m C && - - git checkout B && - echo B >file && - git add file && - test_tick && - git commit -m B && - - git checkout B^0 && - test_must_fail git merge C && - echo B >file && - git add file && - test_tick && - git commit -m D && - git tag D && - - git checkout C^0 && - test_must_fail git merge B && - git rm file && - test_tick && - git commit -m E && - git tag E + test_create_repo modify-delete && + ( + cd modify-delete && + + echo A >file && + git add file && + test_tick && + git commit -m A && + + git branch B && + git checkout -b C && + git rm file && + test_tick && + git commit -m C && + + git checkout B && + echo B >file && + git add file && + test_tick && + git commit -m B && + + git checkout B^0 && + test_must_fail git merge C && + echo B >file && + git add file && + test_tick && + git commit -m D && + git tag D && + + git checkout C^0 && + test_must_fail git merge B && + git rm file && + test_tick && + git commit -m E && + git tag E + ) ' test_expect_success 'git detects conflict merging criss-cross+modify/delete' ' - git checkout D^0 && + ( + cd modify-delete && + + git checkout D^0 && - test_must_fail git merge -s recursive E^0 && + test_must_fail git merge -s recursive E^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && - test $(git rev-parse :1:file) = $(git rev-parse master:file) && - test $(git rev-parse :2:file) = $(git rev-parse B:file) + git rev-parse >expect \ + master:file B:file && + git rev-parse >actual \ + :1:file :2:file && + test_cmp expect actual + ) ' test_expect_success 'git detects conflict merging criss-cross+modify/delete, reverse direction' ' - git reset --hard && - git checkout E^0 && + ( + cd modify-delete && - test_must_fail git merge -s recursive D^0 && + git reset --hard && + git checkout E^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && + test_must_fail git merge -s recursive D^0 && - test $(git rev-parse :1:file) = $(git rev-parse master:file) && - test $(git rev-parse :3:file) = $(git rev-parse B:file) + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + + git rev-parse >expect \ + master:file B:file && + git rev-parse >actual \ + :1:file :3:file && + test_cmp expect actual + ) ' # @@ -336,120 +382,164 @@ test_expect_success 'git detects conflict merging criss-cross+modify/delete, rev # test_expect_success 'setup differently handled merges of directory/file conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - >ignore-me && - git add ignore-me && - test_tick && - git commit -m A && - git tag A && - - git branch B && - git checkout -b C && - mkdir a && - echo 10 >a/file && - git add a/file && - test_tick && - git commit -m C && - - git checkout B && - echo 5 >a && - git add a && - test_tick && - git commit -m B && - - git checkout B^0 && - test_must_fail git merge C && - git clean -f && - rm -rf a/ && - echo 5 >a && - git add a && - test_tick && - git commit -m D && - git tag D && - - git checkout C^0 && - test_must_fail git merge B && - git clean -f && - git rm --cached a && - echo 10 >a/file && - git add a/file && - test_tick && - git commit -m E1 && - git tag E1 && - - git checkout C^0 && - test_must_fail git merge B && - git clean -f && - git rm --cached a && - printf "10\n11\n" >a/file && - git add a/file && - test_tick && - git commit -m E2 && - git tag E2 + test_create_repo directory-file && + ( + cd directory-file && + + >ignore-me && + git add ignore-me && + test_tick && + git commit -m A && + git tag A && + + git branch B && + git checkout -b C && + mkdir a && + echo 10 >a/file && + git add a/file && + test_tick && + git commit -m C && + + git checkout B && + echo 5 >a && + git add a && + test_tick && + git commit -m B && + + git checkout B^0 && + test_must_fail git merge C && + git clean -f && + rm -rf a/ && + echo 5 >a && + git add a && + test_tick && + git commit -m D && + git tag D && + + git checkout C^0 && + test_must_fail git merge B && + git clean -f && + git rm --cached a && + echo 10 >a/file && + git add a/file && + test_tick && + git commit -m E1 && + git tag E1 && + + git checkout C^0 && + test_must_fail git merge B && + git clean -f && + git rm --cached a && + printf "10\n11\n" >a/file && + git add a/file && + test_tick && + git commit -m E2 && + git tag E2 + ) ' test_expect_success 'merge of D & E1 fails but has appropriate contents' ' - get_clean_checkout D^0 && - - test_must_fail git merge -s recursive E1^0 && - - test 2 -eq $(git ls-files -s | wc -l) && - test 1 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :0:ignore-me) = $(git rev-parse A:ignore-me) && - test $(git rev-parse :2:a) = $(git rev-parse B:a) + test_when_finished "git -C directory-file reset --hard" && + test_when_finished "git -C directory-file clean -fdqx" && + ( + cd directory-file && + + git checkout D^0 && + + test_must_fail git merge -s recursive E1^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + A:ignore-me B:a && + git rev-parse >actual \ + :0:ignore-me :2:a && + test_cmp expect actual + ) ' test_expect_success 'merge of E1 & D fails but has appropriate contents' ' - get_clean_checkout E1^0 && - - test_must_fail git merge -s recursive D^0 && - - test 2 -eq $(git ls-files -s | wc -l) && - test 1 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :0:ignore-me) = $(git rev-parse A:ignore-me) && - test $(git rev-parse :3:a) = $(git rev-parse B:a) + test_when_finished "git -C directory-file reset --hard" && + test_when_finished "git -C directory-file clean -fdqx" && + ( + cd directory-file && + + git checkout E1^0 && + + test_must_fail git merge -s recursive D^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + A:ignore-me B:a && + git rev-parse >actual \ + :0:ignore-me :3:a && + test_cmp expect actual + ) ' test_expect_success 'merge of D & E2 fails but has appropriate contents' ' - get_clean_checkout D^0 && - - test_must_fail git merge -s recursive E2^0 && - - test 4 -eq $(git ls-files -s | wc -l) && - test 3 -eq $(git ls-files -u | wc -l) && - test 1 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :2:a) = $(git rev-parse B:a) && - test $(git rev-parse :3:a/file) = $(git rev-parse E2:a/file) && - test $(git rev-parse :1:a/file) = $(git rev-parse C:a/file) && - test $(git rev-parse :0:ignore-me) = $(git rev-parse A:ignore-me) && - - test -f a~HEAD + test_when_finished "git -C directory-file reset --hard" && + test_when_finished "git -C directory-file clean -fdqx" && + ( + cd directory-file && + + git checkout D^0 && + + test_must_fail git merge -s recursive E2^0 && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >expect \ + B:a E2:a/file c:a/file A:ignore-me && + git rev-parse >actual \ + :2:a :3:a/file :1:a/file :0:ignore-me && + test_cmp expect actual + + test_path_is_file a~HEAD + ) ' test_expect_success 'merge of E2 & D fails but has appropriate contents' ' - get_clean_checkout E2^0 && - - test_must_fail git merge -s recursive D^0 && - - test 4 -eq $(git ls-files -s | wc -l) && - test 3 -eq $(git ls-files -u | wc -l) && - test 1 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :3:a) = $(git rev-parse B:a) && - test $(git rev-parse :2:a/file) = $(git rev-parse E2:a/file) && - test $(git rev-parse :1:a/file) = $(git rev-parse C:a/file) && - test $(git rev-parse :0:ignore-me) = $(git rev-parse A:ignore-me) && - - test -f a~D^0 + test_when_finished "git -C directory-file reset --hard" && + test_when_finished "git -C directory-file clean -fdqx" && + ( + cd directory-file && + + git checkout E2^0 && + + test_must_fail git merge -s recursive D^0 && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >expect \ + B:a E2:a/file c:a/file A:ignore-me && + git rev-parse >actual \ + :3:a :2:a/file :1:a/file :0:ignore-me && + test_cmp expect actual + + test_path_is_file a~D^0 + ) ' # @@ -492,52 +582,58 @@ test_expect_success 'merge of E2 & D fails but has appropriate contents' ' # but that may cancel out at the final merge stage". test_expect_success 'setup rename/rename(1to2)/modify followed by what looks like rename/rename(2to1)/modify' ' - git reset --hard && - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n6\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - echo 7 >>b && - git add -u && - git commit -m B && - - git checkout -b C A && - git mv a c && - git commit -m C && - - git checkout -q B^0 && - git merge --no-commit -s ours C^0 && - git mv b newname && - git commit -m "Merge commit C^0 into HEAD" && - git tag D && - - git checkout -q C^0 && - git merge --no-commit -s ours B^0 && - git mv c newname && - printf "7\n8\n" >>newname && - git add -u && - git commit -m "Merge commit B^0 into HEAD" && - git tag E + test_create_repo rename-squared-squared && + ( + cd rename-squared-squared && + + printf "1\n2\n3\n4\n5\n6\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + echo 7 >>b && + git add -u && + git commit -m B && + + git checkout -b C A && + git mv a c && + git commit -m C && + + git checkout -q B^0 && + git merge --no-commit -s ours C^0 && + git mv b newname && + git commit -m "Merge commit C^0 into HEAD" && + git tag D && + + git checkout -q C^0 && + git merge --no-commit -s ours B^0 && + git mv c newname && + printf "7\n8\n" >>newname && + git add -u && + git commit -m "Merge commit B^0 into HEAD" && + git tag E + ) ' test_expect_success 'handle rename/rename(1to2)/modify followed by what looks like rename/rename(2to1)/modify' ' - git checkout D^0 && + ( + cd rename-squared-squared && + + git checkout D^0 && - git merge -s recursive E^0 && + git merge -s recursive E^0 && - test 1 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 1 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && - test $(git rev-parse HEAD:newname) = $(git rev-parse E:newname) + test $(git rev-parse HEAD:newname) = $(git rev-parse E:newname) + ) ' # @@ -562,59 +658,72 @@ test_expect_success 'handle rename/rename(1to2)/modify followed by what looks li # renaming carefully (both in the virtual merge base and later), and getting # content merge handled. -test_expect_success 'setup criss-cross + rename/rename/add + modify/modify' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "lots\nof\nwords\nand\ncontent\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - git commit -m B && - - git checkout -b C A && - git mv a c && - printf "2\n3\n4\n5\n6\n7\n" >a && - git add a && - git commit -m C && - - git checkout B^0 && - git merge --no-commit -s ours C^0 && - git checkout C -- a c && - mv a old_a && - echo 1 >a && - cat old_a >>a && - rm old_a && - git add -u && - git commit -m "Merge commit C^0 into HEAD" && - git tag D && - - git checkout C^0 && - git merge --no-commit -s ours B^0 && - git checkout B -- b && - echo 8 >>a && - git add -u && - git commit -m "Merge commit B^0 into HEAD" && - git tag E +test_expect_success 'setup criss-cross + rename/rename/add-source + modify/modify' ' + test_create_repo rename-rename-add-source && + ( + cd rename-rename-add-source && + + printf "lots\nof\nwords\nand\ncontent\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + git commit -m B && + + git checkout -b C A && + git mv a c && + printf "2\n3\n4\n5\n6\n7\n" >a && + git add a && + git commit -m C && + + git checkout B^0 && + git merge --no-commit -s ours C^0 && + git checkout C -- a c && + mv a old_a && + echo 1 >a && + cat old_a >>a && + rm old_a && + git add -u && + git commit -m "Merge commit C^0 into HEAD" && + git tag D && + + git checkout C^0 && + git merge --no-commit -s ours B^0 && + git checkout B -- b && + echo 8 >>a && + git add -u && + git commit -m "Merge commit B^0 into HEAD" && + git tag E + ) ' test_expect_failure 'detect rename/rename/add-source for virtual merge-base' ' - git checkout D^0 && - - git merge -s recursive E^0 && - - test 3 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse HEAD:b) = $(git rev-parse A:a) && - test $(git rev-parse HEAD:c) = $(git rev-parse A:a) && - test "$(cat a)" = "$(printf "1\n2\n3\n4\n5\n6\n7\n8\n")" + ( + cd rename-rename-add-source && + + git checkout D^0 && + + git merge -s recursive E^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + printf "1\n2\n3\n4\n5\n6\n7\n8\n" >correct && + git rev-parse >expect \ + A:a A:a \ + correct && + git rev-parse >actual \ + :0:b :0:c && + git hash-object >>actual \ + a && + test_cmp expect actual + ) ' # @@ -638,52 +747,62 @@ test_expect_failure 'detect rename/rename/add-source for virtual merge-base' ' # base of B & C needs to not delete B:c for that to work, though... test_expect_success 'setup criss-cross+rename/rename/add-dest + simple modify' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - printf "1\n2\n3\n4\n5\n6\n7\n" >c && - git add c && - git commit -m B && - - git checkout -b C A && - git mv a c && - git commit -m C && - - git checkout B^0 && - git merge --no-commit -s ours C^0 && - git mv b a && - git commit -m "D is like B but renames b back to a" && - git tag D && - - git checkout B^0 && - git merge --no-commit -s ours C^0 && - git mv b a && - echo 8 >>c && - git add c && - git commit -m "E like D but has mod in c" && - git tag E + test_create_repo rename-rename-add-dest && + ( + cd rename-rename-add-dest && + + >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + printf "1\n2\n3\n4\n5\n6\n7\n" >c && + git add c && + git commit -m B && + + git checkout -b C A && + git mv a c && + git commit -m C && + + git checkout B^0 && + git merge --no-commit -s ours C^0 && + git mv b a && + git commit -m "D is like B but renames b back to a" && + git tag D && + + git checkout B^0 && + git merge --no-commit -s ours C^0 && + git mv b a && + echo 8 >>c && + git add c && + git commit -m "E like D but has mod in c" && + git tag E + ) ' test_expect_success 'virtual merge base handles rename/rename(1to2)/add-dest' ' - git checkout D^0 && - - git merge -s recursive E^0 && - - test 2 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse HEAD:a) = $(git rev-parse A:a) && - test $(git rev-parse HEAD:c) = $(git rev-parse E:c) + ( + cd rename-rename-add-dest && + + git checkout D^0 && + + git merge -s recursive E^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + A:a E:c && + git rev-parse >actual \ + :0:a :0:c && + test_cmp expect actual + ) ' test_done diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index 8f17fd9da8..716283b274 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -147,6 +147,48 @@ test_expect_success 'status -s -b (diverged from upstream)' ' ' cat >expect <<\EOF +## b1...origin/master [different] +EOF + +test_expect_success 'status -s -b --no-ahead-behind (diverged from upstream)' ' + ( + cd test && + git checkout b1 >/dev/null && + git status -s -b --no-ahead-behind | head -1 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF +On branch b1 +Your branch and 'origin/master' have diverged, +and have 1 and 1 different commits each, respectively. +EOF + +test_expect_success 'status --long --branch' ' + ( + cd test && + git checkout b1 >/dev/null && + git status --long -b | head -3 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF +On branch b1 +Your branch and 'origin/master' refer to different commits. +EOF + +test_expect_success 'status --long --branch --no-ahead-behind' ' + ( + cd test && + git checkout b1 >/dev/null && + git status --long -b --no-ahead-behind | head -2 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF ## b5...brokenbase [gone] EOF diff --git a/t/t6042-merge-rename-corner-cases.sh b/t/t6042-merge-rename-corner-cases.sh index 411550d2b6..1cbd946fc2 100755 --- a/t/t6042-merge-rename-corner-cases.sh +++ b/t/t6042-merge-rename-corner-cases.sh @@ -6,31 +6,40 @@ test_description="recursive merge corner cases w/ renames but not criss-crosses" . ./test-lib.sh test_expect_success 'setup rename/delete + untracked file' ' - echo "A pretty inscription" >ring && - git add ring && - test_tick && - git commit -m beginning && - - git branch people && - git checkout -b rename-the-ring && - git mv ring one-ring-to-rule-them-all && - test_tick && - git commit -m fullname && - - git checkout people && - git rm ring && - echo gollum >owner && - git add owner && - test_tick && - git commit -m track-people-instead-of-objects && - echo "Myyy PRECIOUSSS" >ring + test_create_repo rename-delete-untracked && + ( + cd rename-delete-untracked && + + echo "A pretty inscription" >ring && + git add ring && + test_tick && + git commit -m beginning && + + git branch people && + git checkout -b rename-the-ring && + git mv ring one-ring-to-rule-them-all && + test_tick && + git commit -m fullname && + + git checkout people && + git rm ring && + echo gollum >owner && + git add owner && + test_tick && + git commit -m track-people-instead-of-objects && + echo "Myyy PRECIOUSSS" >ring + ) ' test_expect_success "Does git preserve Gollum's precious artifact?" ' - test_must_fail git merge -s recursive rename-the-ring && + ( + cd rename-delete-untracked && - # Make sure git did not delete an untracked file - test -f ring + test_must_fail git merge -s recursive rename-the-ring && + + # Make sure git did not delete an untracked file + test_path_is_file ring + ) ' # Testcase setup for rename/modify/add-source: @@ -41,96 +50,125 @@ test_expect_success "Does git preserve Gollum's precious artifact?" ' # We should be able to merge B & C cleanly test_expect_success 'setup rename/modify/add-source conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n6\n7\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - echo 8 >>a && - git add a && - git commit -m B && - - git checkout -b C A && - git mv a b && - echo something completely different >a && - git add a && - git commit -m C + test_create_repo rename-modify-add-source && + ( + cd rename-modify-add-source && + + printf "1\n2\n3\n4\n5\n6\n7\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + echo 8 >>a && + git add a && + git commit -m B && + + git checkout -b C A && + git mv a b && + echo something completely different >a && + git add a && + git commit -m C + ) ' test_expect_failure 'rename/modify/add-source conflict resolvable' ' - git checkout B^0 && + ( + cd rename-modify-add-source && + + git checkout B^0 && - git merge -s recursive C^0 && + git merge -s recursive C^0 && - test $(git rev-parse B:a) = $(git rev-parse b) && - test $(git rev-parse C:a) = $(git rev-parse a) + git rev-parse >expect \ + B:a C:a && + git rev-parse >actual \ + b c && + test_cmp expect actual + ) ' test_expect_success 'setup resolvable conflict missed if rename missed' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n" >a && - echo foo >b && - git add a b && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a c && - echo "Completely different content" >a && - git add a && - git commit -m B && - - git checkout -b C A && - echo 6 >>a && - git add a && - git commit -m C + test_create_repo break-detection-1 && + ( + cd break-detection-1 && + + printf "1\n2\n3\n4\n5\n" >a && + echo foo >b && + git add a b && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a c && + echo "Completely different content" >a && + git add a && + git commit -m B && + + git checkout -b C A && + echo 6 >>a && + git add a && + git commit -m C + ) ' test_expect_failure 'conflict caused if rename not detected' ' - git checkout -q C^0 && - git merge -s recursive B^0 && - - test 3 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test_line_count = 6 c && - test $(git rev-parse HEAD:a) = $(git rev-parse B:a) && - test $(git rev-parse HEAD:b) = $(git rev-parse A:b) + ( + cd break-detection-1 && + + git checkout -q C^0 && + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + test_line_count = 6 c && + git rev-parse >expect \ + B:a A:b && + git rev-parse >actual \ + :0:a :0:b && + test_cmp expect actual + ) ' test_expect_success 'setup conflict resolved wrong if rename missed' ' - git reset --hard && - git clean -f && - - git checkout -b D A && - echo 7 >>a && - git add a && - git mv a c && - echo "Completely different content" >a && - git add a && - git commit -m D && - - git checkout -b E A && - git rm a && - echo "Completely different content" >>a && - git add a && - git commit -m E + test_create_repo break-detection-2 && + ( + cd break-detection-2 && + + printf "1\n2\n3\n4\n5\n" >a && + echo foo >b && + git add a b && + git commit -m A && + git tag A && + + git checkout -b D A && + echo 7 >>a && + git add a && + git mv a c && + echo "Completely different content" >a && + git add a && + git commit -m D && + + git checkout -b E A && + git rm a && + echo "Completely different content" >>a && + git add a && + git commit -m E + ) ' test_expect_failure 'missed conflict if rename not detected' ' - git checkout -q E^0 && - test_must_fail git merge -s recursive D^0 + ( + cd break-detection-2 && + + git checkout -q E^0 && + test_must_fail git merge -s recursive D^0 + ) ' # Tests for undetected rename/add-source causing a file to erroneously be @@ -145,198 +183,233 @@ test_expect_failure 'missed conflict if rename not detected' ' # Commit C: rename a->b, add unrelated a test_expect_success 'setup undetected rename/add-source causes data loss' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - git commit -m B && - - git checkout -b C A && - git mv a b && - echo foobar >a && - git add a && - git commit -m C + test_create_repo break-detection-3 && + ( + cd break-detection-3 && + + printf "1\n2\n3\n4\n5\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + git commit -m B && + + git checkout -b C A && + git mv a b && + echo foobar >a && + git add a && + git commit -m C + ) ' test_expect_failure 'detect rename/add-source and preserve all data' ' - git checkout B^0 && + ( + cd break-detection-3 && - git merge -s recursive C^0 && + git checkout B^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git merge -s recursive C^0 && - test -f a && - test -f b && + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && - test $(git rev-parse HEAD:b) = $(git rev-parse A:a) && - test $(git rev-parse HEAD:a) = $(git rev-parse C:a) + test_path_is_file a && + test_path_is_file b && + + git rev-parse >expect \ + A:a C:a && + git rev-parse >actual \ + :0:b :0:a && + test_cmp expect actual + ) ' test_expect_failure 'detect rename/add-source and preserve all data, merge other way' ' - git checkout C^0 && + ( + cd break-detection-3 && + + git checkout C^0 && - git merge -s recursive B^0 && + git merge -s recursive B^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && - test -f a && - test -f b && + test_path_is_file a && + test_path_is_file b && - test $(git rev-parse HEAD:b) = $(git rev-parse A:a) && - test $(git rev-parse HEAD:a) = $(git rev-parse C:a) + git rev-parse >expect \ + A:a C:a && + git rev-parse >actual \ + :0:b :0:a && + test_cmp expect actual + ) ' test_expect_success 'setup content merge + rename/directory conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n6\n" >file && - git add file && - test_tick && - git commit -m base && - git tag base && - - git checkout -b right && - echo 7 >>file && - mkdir newfile && - echo junk >newfile/realfile && - git add file newfile/realfile && - test_tick && - git commit -m right && - - git checkout -b left-conflict base && - echo 8 >>file && - git add file && - git mv file newfile && - test_tick && - git commit -m left && - - git checkout -b left-clean base && - echo 0 >newfile && - cat file >>newfile && - git add newfile && - git rm file && - test_tick && - git commit -m left + test_create_repo rename-directory-1 && + ( + cd rename-directory-1 && + + printf "1\n2\n3\n4\n5\n6\n" >file && + git add file && + test_tick && + git commit -m base && + git tag base && + + git checkout -b right && + echo 7 >>file && + mkdir newfile && + echo junk >newfile/realfile && + git add file newfile/realfile && + test_tick && + git commit -m right && + + git checkout -b left-conflict base && + echo 8 >>file && + git add file && + git mv file newfile && + test_tick && + git commit -m left && + + git checkout -b left-clean base && + echo 0 >newfile && + cat file >>newfile && + git add newfile && + git rm file && + test_tick && + git commit -m left + ) ' test_expect_success 'rename/directory conflict + clean content merge' ' - git reset --hard && - git reset --hard && - git clean -fdqx && + ( + cd rename-directory-1 && - git checkout left-clean^0 && + git checkout left-clean^0 && - test_must_fail git merge -s recursive right^0 && + test_must_fail git merge -s recursive right^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 1 -eq $(git ls-files -u | wc -l) && - test 1 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 2 out && - echo 0 >expect && - git cat-file -p base:file >>expect && - echo 7 >>expect && - test_cmp expect newfile~HEAD && + echo 0 >expect && + git cat-file -p base:file >>expect && + echo 7 >>expect && + test_cmp expect newfile~HEAD && - test $(git rev-parse :2:newfile) = $(git hash-object expect) && + test $(git rev-parse :2:newfile) = $(git hash-object expect) && - test -f newfile/realfile && - test -f newfile~HEAD + test_path_is_file newfile/realfile && + test_path_is_file newfile~HEAD + ) ' test_expect_success 'rename/directory conflict + content merge conflict' ' - git reset --hard && - git reset --hard && - git clean -fdqx && - - git checkout left-conflict^0 && - - test_must_fail git merge -s recursive right^0 && - - test 4 -eq $(git ls-files -s | wc -l) && - test 3 -eq $(git ls-files -u | wc -l) && - test 1 -eq $(git ls-files -o | wc -l) && - - git cat-file -p left-conflict:newfile >left && - git cat-file -p base:file >base && - git cat-file -p right:file >right && - test_must_fail git merge-file \ - -L "HEAD:newfile" \ - -L "" \ - -L "right^0:file" \ - left base right && - test_cmp left newfile~HEAD && - - test $(git rev-parse :1:newfile) = $(git rev-parse base:file) && - test $(git rev-parse :2:newfile) = $(git rev-parse left-conflict:newfile) && - test $(git rev-parse :3:newfile) = $(git rev-parse right:file) && - - test -f newfile/realfile && - test -f newfile~HEAD + ( + cd rename-directory-1 && + + git reset --hard && + git reset --hard && + git clean -fdqx && + + git checkout left-conflict^0 && + + test_must_fail git merge -s recursive right^0 && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 2 out && + + git cat-file -p left-conflict:newfile >left && + git cat-file -p base:file >base && + git cat-file -p right:file >right && + test_must_fail git merge-file \ + -L "HEAD:newfile" \ + -L "" \ + -L "right^0:file" \ + left base right && + test_cmp left newfile~HEAD && + + git rev-parse >expect \ + base:file left-conflict:newfile right:file && + git rev-parse >actual \ + :1:newfile :2:newfile :3:newfile && + test_cmp expect actual + + test_path_is_file newfile/realfile && + test_path_is_file newfile~HEAD + ) ' test_expect_success 'setup content merge + rename/directory conflict w/ disappearing dir' ' - git reset --hard && - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - mkdir sub && - printf "1\n2\n3\n4\n5\n6\n" >sub/file && - git add sub/file && - test_tick && - git commit -m base && - git tag base && - - git checkout -b right && - echo 7 >>sub/file && - git add sub/file && - test_tick && - git commit -m right && - - git checkout -b left base && - echo 0 >newfile && - cat sub/file >>newfile && - git rm sub/file && - mv newfile sub && - git add sub && - test_tick && - git commit -m left + test_create_repo rename-directory-2 && + ( + cd rename-directory-2 && + + mkdir sub && + printf "1\n2\n3\n4\n5\n6\n" >sub/file && + git add sub/file && + test_tick && + git commit -m base && + git tag base && + + git checkout -b right && + echo 7 >>sub/file && + git add sub/file && + test_tick && + git commit -m right && + + git checkout -b left base && + echo 0 >newfile && + cat sub/file >>newfile && + git rm sub/file && + mv newfile sub && + git add sub && + test_tick && + git commit -m left + ) ' test_expect_success 'disappearing dir in rename/directory conflict handled' ' - git reset --hard && - git clean -fdqx && + ( + cd rename-directory-2 && - git checkout left^0 && + git checkout left^0 && - git merge -s recursive right^0 && + git merge -s recursive right^0 && - test 1 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 1 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && - echo 0 >expect && - git cat-file -p base:sub/file >>expect && - echo 7 >>expect && - test_cmp expect sub && + echo 0 >expect && + git cat-file -p base:sub/file >>expect && + echo 7 >>expect && + test_cmp expect sub && - test -f sub + test_path_is_file sub + ) ' # Test for all kinds of things that can go wrong with rename/rename (2to1): @@ -352,48 +425,59 @@ test_expect_success 'disappearing dir in rename/directory conflict handled' ' # * Nothing else should be present. Is anything? test_expect_success 'setup rename/rename (2to1) + modify/modify' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n" >a && - printf "5\n4\n3\n2\n1\n" >b && - git add a b && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a c && - echo 0 >>b && - git add b && - git commit -m B && - - git checkout -b C A && - git mv b c && - echo 6 >>a && - git add a && - git commit -m C + test_create_repo rename-rename-2to1 && + ( + cd rename-rename-2to1 && + + printf "1\n2\n3\n4\n5\n" >a && + printf "5\n4\n3\n2\n1\n" >b && + git add a b && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a c && + echo 0 >>b && + git add b && + git commit -m B && + + git checkout -b C A && + git mv b c && + echo 6 >>a && + git add a && + git commit -m C + ) ' test_expect_success 'handle rename/rename (2to1) conflict correctly' ' - git checkout B^0 && - - test_must_fail git merge -s recursive C^0 >out && - test_i18ngrep "CONFLICT (rename/rename)" out && - - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && - test 2 -eq $(git ls-files -u c | wc -l) && - test 3 -eq $(git ls-files -o | wc -l) && - - test ! -f a && - test ! -f b && - test -f c~HEAD && - test -f c~C^0 && - - test $(git hash-object c~HEAD) = $(git rev-parse C:a) && - test $(git hash-object c~C^0) = $(git rev-parse B:b) + ( + cd rename-rename-2to1 && + + git checkout B^0 && + + test_must_fail git merge -s recursive C^0 >out && + test_i18ngrep "CONFLICT (rename/rename)" out && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -u c >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + test_path_is_missing a && + test_path_is_missing b && + test_path_is_file c~HEAD && + test_path_is_file c~C^0 && + + git rev-parse >expect \ + C:a B:b && + git hash-object >actual \ + c~HEAD c~C^0 && + test_cmp expect actual + ) ' # Testcase setup for simple rename/rename (1to2) conflict: @@ -401,44 +485,53 @@ test_expect_success 'handle rename/rename (2to1) conflict correctly' ' # Commit B: rename a->b # Commit C: rename a->c test_expect_success 'setup simple rename/rename (1to2) conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - echo stuff >a && - git add a && - test_tick && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - test_tick && - git commit -m B && - - git checkout -b C A && - git mv a c && - test_tick && - git commit -m C + test_create_repo rename-rename-1to2 && + ( + cd rename-rename-1to2 && + + echo stuff >a && + git add a && + test_tick && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + test_tick && + git commit -m B && + + git checkout -b C A && + git mv a c && + test_tick && + git commit -m C + ) ' test_expect_success 'merge has correct working tree contents' ' - git checkout C^0 && - - test_must_fail git merge -s recursive B^0 && - - test 3 -eq $(git ls-files -s | wc -l) && - test 3 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :1:a) = $(git rev-parse A:a) && - test $(git rev-parse :3:b) = $(git rev-parse A:a) && - test $(git rev-parse :2:c) = $(git rev-parse A:a) && - - test ! -f a && - test $(git hash-object b) = $(git rev-parse A:a) && - test $(git hash-object c) = $(git rev-parse A:a) + ( + cd rename-rename-1to2 && + + git checkout C^0 && + + test_must_fail git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + test_path_is_missing a && + git rev-parse >expect \ + A:a A:a A:a \ + A:a A:a && + git rev-parse >actual \ + :1:a :3:b :2:c && + git hash-object >>actual \ + b c && + test_cmp expect actual + ) ' # Testcase setup for rename/rename(1to2)/add-source conflict: @@ -449,130 +542,155 @@ test_expect_success 'merge has correct working tree contents' ' # Merging of B & C should NOT be clean; there's a rename/rename conflict test_expect_success 'setup rename/rename(1to2)/add-source conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n6\n7\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - git commit -m B && - - git checkout -b C A && - git mv a c && - echo something completely different >a && - git add a && - git commit -m C + test_create_repo rename-rename-1to2-add-source-1 && + ( + cd rename-rename-1to2-add-source-1 && + + printf "1\n2\n3\n4\n5\n6\n7\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + git commit -m B && + + git checkout -b C A && + git mv a c && + echo something completely different >a && + git add a && + git commit -m C + ) ' test_expect_failure 'detect conflict with rename/rename(1to2)/add-source merge' ' - git checkout B^0 && + ( + cd rename-rename-1to2-add-source-1 && + + git checkout B^0 && - test_must_fail git merge -s recursive C^0 && + test_must_fail git merge -s recursive C^0 && - test 4 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -o >out && + test_line_count = 1 out && - test $(git rev-parse 3:a) = $(git rev-parse C:a) && - test $(git rev-parse 1:a) = $(git rev-parse A:a) && - test $(git rev-parse 2:b) = $(git rev-parse B:b) && - test $(git rev-parse 3:c) = $(git rev-parse C:c) && + git rev-parse >expect \ + C:a A:a B:b C:C && + git rev-parse >actual \ + :3:a :1:a :2:b :3:c && + test_cmp expect actual - test -f a && - test -f b && - test -f c + test_path_is_file a && + test_path_is_file b && + test_path_is_file c + ) ' test_expect_success 'setup rename/rename(1to2)/add-source resolvable conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - >a && - git add a && - test_tick && - git commit -m base && - git tag A && - - git checkout -b B A && - git mv a b && - test_tick && - git commit -m one && - - git checkout -b C A && - git mv a b && - echo important-info >a && - git add a && - test_tick && - git commit -m two + test_create_repo rename-rename-1to2-add-source-2 && + ( + cd rename-rename-1to2-add-source-2 && + + >a && + git add a && + test_tick && + git commit -m base && + git tag A && + + git checkout -b B A && + git mv a b && + test_tick && + git commit -m one && + + git checkout -b C A && + git mv a b && + echo important-info >a && + git add a && + test_tick && + git commit -m two + ) ' test_expect_failure 'rename/rename/add-source still tracks new a file' ' - git checkout C^0 && - git merge -s recursive B^0 && - - test 2 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse HEAD:a) = $(git rev-parse C:a) && - test $(git rev-parse HEAD:b) = $(git rev-parse A:a) + ( + cd rename-rename-1to2-add-source-2 && + + git checkout C^0 && + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + C:a A:a && + git rev-parse >actual \ + :0:a :0:b && + test_cmp expect actual + ) ' test_expect_success 'setup rename/rename(1to2)/add-dest conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - echo stuff >a && - git add a && - test_tick && - git commit -m base && - git tag A && - - git checkout -b B A && - git mv a b && - echo precious-data >c && - git add c && - test_tick && - git commit -m one && - - git checkout -b C A && - git mv a c && - echo important-info >b && - git add b && - test_tick && - git commit -m two + test_create_repo rename-rename-1to2-add-dest && + ( + cd rename-rename-1to2-add-dest && + + echo stuff >a && + git add a && + test_tick && + git commit -m base && + git tag A && + + git checkout -b B A && + git mv a b && + echo precious-data >c && + git add c && + test_tick && + git commit -m one && + + git checkout -b C A && + git mv a c && + echo important-info >b && + git add b && + test_tick && + git commit -m two + ) ' test_expect_success 'rename/rename/add-dest merge still knows about conflicting file versions' ' - git checkout C^0 && - test_must_fail git merge -s recursive B^0 && - - test 5 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u b | wc -l) && - test 2 -eq $(git ls-files -u c | wc -l) && - test 4 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :1:a) = $(git rev-parse A:a) && - test $(git rev-parse :2:b) = $(git rev-parse C:b) && - test $(git rev-parse :3:b) = $(git rev-parse B:b) && - test $(git rev-parse :2:c) = $(git rev-parse C:c) && - test $(git rev-parse :3:c) = $(git rev-parse B:c) && - - test $(git hash-object c~HEAD) = $(git rev-parse C:c) && - test $(git hash-object c~B\^0) = $(git rev-parse B:c) && - test $(git hash-object b~HEAD) = $(git rev-parse C:b) && - test $(git hash-object b~B\^0) = $(git rev-parse B:b) && - - test ! -f b && - test ! -f c + ( + cd rename-rename-1to2-add-dest && + + git checkout C^0 && + test_must_fail git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u b >out && + test_line_count = 2 out && + git ls-files -u c >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 5 out && + + git rev-parse >expect \ + A:a C:b B:b C:c B:c && + git rev-parse >actual \ + :1:a :2:b :3:b :2:c :3:c && + test_cmp expect actual + + git rev-parse >expect \ + C:c B:c C:b B:b && + git hash-object >actual \ + c~HEAD c~B\^0 b~HEAD b~B\^0 && + test_cmp expect actual + + test_path_is_missing b && + test_path_is_missing c + ) ' test_done diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh new file mode 100755 index 0000000000..2e28f2908d --- /dev/null +++ b/t/t6043-merge-rename-directories.sh @@ -0,0 +1,3998 @@ +#!/bin/sh + +test_description="recursive merge with directory renames" +# includes checking of many corner cases, with a similar methodology to: +# t6042: corner cases with renames but not criss-cross merges +# t6036: corner cases with both renames and criss-cross merges +# +# The setup for all of them, pictorially, is: +# +# A +# o +# / \ +# O o ? +# \ / +# o +# B +# +# To help make it easier to follow the flow of tests, they have been +# divided into sections and each test will start with a quick explanation +# of what commits O, A, and B contain. +# +# Notation: +# z/{b,c} means files z/b and z/c both exist +# x/d_1 means file x/d exists with content d1. (Purpose of the +# underscore notation is to differentiate different +# files that might be renamed into each other's paths.) + +. ./test-lib.sh + + +########################################################################### +# SECTION 1: Basic cases we should be able to handle +########################################################################### + +# Testcase 1a, Basic directory rename. +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d,e/f} +# Expected: y/{b,c,d,e/f} + +test_expect_success '1a-setup: Simple directory rename detection' ' + test_create_repo 1a && + ( + cd 1a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + mkdir z/e && + echo f >z/e/f && + git add z/d z/e/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1a-check: Simple directory rename detection' ' + ( + cd 1a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:y/e/f && + git rev-parse >expect \ + O:z/b O:z/c B:z/d B:z/e/f && + test_cmp expect actual && + + git hash-object y/d >actual && + git rev-parse B:z/d >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:z/d && + test_must_fail git rev-parse HEAD:z/e/f && + test_path_is_missing z/d && + test_path_is_missing z/e/f + ) +' + +# Testcase 1b, Merge a directory with another +# Commit O: z/{b,c}, y/d +# Commit A: z/{b,c,e}, y/d +# Commit B: y/{b,c,d} +# Expected: y/{b,c,d,e} + +test_expect_success '1b-setup: Merge a directory with another' ' + test_create_repo 1b && + ( + cd 1b && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir y && + echo d >y/d && + git add z y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e >z/e && + git add z/e && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/b y && + git mv z/c y && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1b-check: Merge a directory with another' ' + ( + cd 1b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:y/e && + git rev-parse >expect \ + O:z/b O:z/c O:y/d A:z/e && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:z/e + ) +' + +# Testcase 1c, Transitive renaming +# (Related to testcases 3a and 6d -- when should a transitive rename apply?) +# (Related to testcases 9c and 9d -- can transitivity repeat?) +# (Related to testcase 12b -- joint-transitivity?) +# Commit O: z/{b,c}, x/d +# Commit A: y/{b,c}, x/d +# Commit B: z/{b,c,d} +# Expected: y/{b,c,d} (because x/d -> z/d -> y/d) + +test_expect_success '1c-setup: Transitive renaming' ' + test_create_repo 1c && + ( + cd 1c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1c-check: Transitive renaming' ' + ( + cd 1c && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:x/d && + test_must_fail git rev-parse HEAD:z/d && + test_path_is_missing z/d + ) +' + +# Testcase 1d, Directory renames (merging two directories into one new one) +# cause a rename/rename(2to1) conflict +# (Related to testcases 1c and 7b) +# Commit O. z/{b,c}, y/{d,e} +# Commit A. x/{b,c}, y/{d,e,m,wham_1} +# Commit B. z/{b,c,n,wham_2}, x/{d,e} +# Expected: x/{b,c,d,e,m,n}, CONFLICT:(y/wham_1 & z/wham_2 -> x/wham) +# Note: y/m & z/n should definitely move into x. By the same token, both +# y/wham_1 & z/wham_2 should too...giving us a conflict. + +test_expect_success '1d-setup: Directory renames cause a rename/rename(2to1) conflict' ' + test_create_repo 1d && + ( + cd 1d && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir y && + echo d >y/d && + echo e >y/e && + git add z y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z x && + echo m >y/m && + echo wham1 >y/wham && + git add y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv y x && + echo n >z/n && + echo wham2 >z/wham && + git add z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) conflict' ' + ( + cd 1d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename)" out && + + git ls-files -s >out && + test_line_count = 8 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:x/b :0:x/c :0:x/d :0:x/e :0:x/m :0:x/n && + git rev-parse >expect \ + O:z/b O:z/c O:y/d O:y/e A:y/m B:z/n && + test_cmp expect actual && + + test_must_fail git rev-parse :0:x/wham && + git rev-parse >actual \ + :2:x/wham :3:x/wham && + git rev-parse >expect \ + A:y/wham B:z/wham && + test_cmp expect actual && + + test_path_is_missing x/wham && + test_path_is_file x/wham~HEAD && + test_path_is_file x/wham~B^0 && + + git hash-object >actual \ + x/wham~HEAD x/wham~B^0 && + git rev-parse >expect \ + A:y/wham B:z/wham && + test_cmp expect actual + ) +' + +# Testcase 1e, Renamed directory, with all filenames being renamed too +# (Related to testcases 9f & 9g) +# Commit O: z/{oldb,oldc} +# Commit A: y/{newb,newc} +# Commit B: z/{oldb,oldc,d} +# Expected: y/{newb,newc,d} + +test_expect_success '1e-setup: Renamed directory, with all files being renamed too' ' + test_create_repo 1e && + ( + cd 1e && + + mkdir z && + echo b >z/oldb && + echo c >z/oldc && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + git mv z/oldb y/newb && + git mv z/oldc y/newc && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1e-check: Renamed directory, with all files being renamed too' ' + ( + cd 1e && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/newb HEAD:y/newc HEAD:y/d && + git rev-parse >expect \ + O:z/oldb O:z/oldc B:z/d && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:z/d + ) +' + +# Testcase 1f, Split a directory into two other directories +# (Related to testcases 3a, all of section 2, and all of section 4) +# Commit O: z/{b,c,d,e,f} +# Commit A: z/{b,c,d,e,f,g} +# Commit B: y/{b,c}, x/{d,e,f} +# Expected: y/{b,c}, x/{d,e,f,g} + +test_expect_success '1f-setup: Split a directory into two other directories' ' + test_create_repo 1f && + ( + cd 1f && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + echo e >z/e && + echo f >z/f && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo g >z/g && + git add z/g && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + git mv z/e x/ && + git mv z/f x/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1f-check: Split a directory into two other directories' ' + ( + cd 1f && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:x/d HEAD:x/e HEAD:x/f HEAD:x/g && + git rev-parse >expect \ + O:z/b O:z/c O:z/d O:z/e O:z/f A:z/g && + test_cmp expect actual && + test_path_is_missing z/g && + test_must_fail git rev-parse HEAD:z/g + ) +' + +########################################################################### +# Rules suggested by testcases in section 1: +# +# We should still detect the directory rename even if it wasn't just +# the directory renamed, but the files within it. (see 1b) +# +# If renames split a directory into two or more others, the directory +# with the most renames, "wins" (see 1c). However, see the testcases +# in section 2, plus testcases 3a and 4a. +########################################################################### + + +########################################################################### +# SECTION 2: Split into multiple directories, with equal number of paths +# +# Explore the splitting-a-directory rules a bit; what happens in the +# edge cases? +# +# Note that there is a closely related case of a directory not being +# split on either side of history, but being renamed differently on +# each side. See testcase 8e for that. +########################################################################### + +# Testcase 2a, Directory split into two on one side, with equal numbers of paths +# Commit O: z/{b,c} +# Commit A: y/b, w/c +# Commit B: z/{b,c,d} +# Expected: y/b, w/c, z/d, with warning about z/ -> (y/ vs. w/) conflict +test_expect_success '2a-setup: Directory split into two on one side, with equal numbers of paths' ' + test_create_repo 2a && + ( + cd 2a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + mkdir w && + git mv z/b y/ && + git mv z/c w/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2a-check: Directory split into two on one side, with equal numbers of paths' ' + ( + cd 2a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT.*directory rename split" out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:w/c :0:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/d && + test_cmp expect actual + ) +' + +# Testcase 2b, Directory split into two on one side, with equal numbers of paths +# Commit O: z/{b,c} +# Commit A: y/b, w/c +# Commit B: z/{b,c}, x/d +# Expected: y/b, w/c, x/d; No warning about z/ -> (y/ vs. w/) conflict +test_expect_success '2b-setup: Directory split into two on one side, with equal numbers of paths' ' + test_create_repo 2b && + ( + cd 2b && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + mkdir w && + git mv z/b y/ && + git mv z/c w/ && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir x && + echo d >x/d && + git add x/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2b-check: Directory split into two on one side, with equal numbers of paths' ' + ( + cd 2b && + + git checkout A^0 && + + git merge -s recursive B^0 >out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:w/c :0:x/d && + git rev-parse >expect \ + O:z/b O:z/c B:x/d && + test_cmp expect actual && + test_i18ngrep ! "CONFLICT.*directory rename split" out + ) +' + +########################################################################### +# Rules suggested by section 2: +# +# None; the rule was already covered in section 1. These testcases are +# here just to make sure the conflict resolution and necessary warning +# messages are handled correctly. +########################################################################### + + +########################################################################### +# SECTION 3: Path in question is the source path for some rename already +# +# Combining cases from Section 1 and trying to handle them could lead to +# directory renaming detection being over-applied. So, this section +# provides some good testcases to check that the implementation doesn't go +# too far. +########################################################################### + +# Testcase 3a, Avoid implicit rename if involved as source on other side +# (Related to testcases 1c, 1f, and 9h) +# Commit O: z/{b,c,d} +# Commit A: z/{b,c,d} (no change) +# Commit B: y/{b,c}, x/d +# Expected: y/{b,c}, x/d +test_expect_success '3a-setup: Avoid implicit rename if involved as source on other side' ' + test_create_repo 3a && + ( + cd 3a && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3a-check: Avoid implicit rename if involved as source on other side' ' + ( + cd 3a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:x/d && + git rev-parse >expect \ + O:z/b O:z/c O:z/d && + test_cmp expect actual + ) +' + +# Testcase 3b, Avoid implicit rename if involved as source on other side +# (Related to testcases 5c and 7c, also kind of 1e and 1f) +# Commit O: z/{b,c,d} +# Commit A: y/{b,c}, x/d +# Commit B: z/{b,c}, w/d +# Expected: y/{b,c}, CONFLICT:(z/d -> x/d vs. w/d) +# NOTE: We're particularly checking that since z/d is already involved as +# a source in a file rename on the same side of history, that we don't +# get it involved in directory rename detection. If it were, we might +# end up with CONFLICT:(z/d -> y/d vs. x/d vs. w/d), i.e. a +# rename/rename/rename(1to3) conflict, which is just weird. +test_expect_success '3b-setup: Avoid implicit rename if involved as source on current side' ' + test_create_repo 3b && + ( + cd 3b && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + rmdir z && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir w && + git mv z/d w/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3b-check: Avoid implicit rename if involved as source on current side' ' + ( + cd 3b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep CONFLICT.*rename/rename.*z/d.*x/d.*w/d out && + test_i18ngrep ! CONFLICT.*rename/rename.*y/d out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :1:z/d :2:x/d :3:w/d && + git rev-parse >expect \ + O:z/b O:z/c O:z/d O:z/d O:z/d && + test_cmp expect actual && + + test_path_is_missing z/d && + git hash-object >actual \ + x/d w/d && + git rev-parse >expect \ + O:z/d O:z/d && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 3: +# +# Avoid directory-rename-detection for a path, if that path is the source +# of a rename on either side of a merge. +########################################################################### + + +########################################################################### +# SECTION 4: Partially renamed directory; still exists on both sides of merge +# +# What if we were to attempt to do directory rename detection when someone +# "mostly" moved a directory but still left some files around, or, +# equivalently, fully renamed a directory in one commmit and then recreated +# that directory in a later commit adding some new files and then tried to +# merge? +# +# It's hard to divine user intent in these cases, because you can make an +# argument that, depending on the intermediate history of the side being +# merged, that some users will want files in that directory to +# automatically be detected and renamed, while users with a different +# intermediate history wouldn't want that rename to happen. +# +# I think that it is best to simply not have directory rename detection +# apply to such cases. My reasoning for this is four-fold: (1) it's +# easiest for users in general to figure out what happened if we don't +# apply directory rename detection in any such case, (2) it's an easy rule +# to explain ["We don't do directory rename detection if the directory +# still exists on both sides of the merge"], (3) we can get some hairy +# edge/corner cases that would be really confusing and possibly not even +# representable in the index if we were to even try, and [related to 3] (4) +# attempting to resolve this issue of divining user intent by examining +# intermediate history goes against the spirit of three-way merges and is a +# path towards crazy corner cases that are far more complex than what we're +# already dealing with. +# +# Note that the wording of the rule ("We don't do directory rename +# detection if the directory still exists on both sides of the merge.") +# also excludes "renaming" of a directory into a subdirectory of itself +# (e.g. /some/dir/* -> /some/dir/subdir/*). It may be possible to carve +# out an exception for "renaming"-beneath-itself cases without opening +# weird edge/corner cases for other partial directory renames, but for now +# we are keeping the rule simple. +# +# This section contains a test for a partially-renamed-directory case. +########################################################################### + +# Testcase 4a, Directory split, with original directory still present +# (Related to testcase 1f) +# Commit O: z/{b,c,d,e} +# Commit A: y/{b,c,d}, z/e +# Commit B: z/{b,c,d,e,f} +# Expected: y/{b,c,d}, z/{e,f} +# NOTE: Even though most files from z moved to y, we don't want f to follow. + +test_expect_success '4a-setup: Directory split, with original directory still present' ' + test_create_repo 4a && + ( + cd 4a && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + echo e >z/e && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d y/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo f >z/f && + git add z/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '4a-check: Directory split, with original directory still present' ' + ( + cd 4a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:z/e HEAD:z/f && + git rev-parse >expect \ + O:z/b O:z/c O:z/d O:z/e B:z/f && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 4: +# +# Directory-rename-detection should be turned off for any directories (as +# a source for renames) that exist on both sides of the merge. (The "as +# a source for renames" clarification is due to cases like 1c where +# the target directory exists on both sides and we do want the rename +# detection.) But, sadly, see testcase 8b. +########################################################################### + + +########################################################################### +# SECTION 5: Files/directories in the way of subset of to-be-renamed paths +# +# Implicitly renaming files due to a detected directory rename could run +# into problems if there are files or directories in the way of the paths +# we want to rename. Explore such cases in this section. +########################################################################### + +# Testcase 5a, Merge directories, other side adds files to original and target +# Commit O: z/{b,c}, y/d +# Commit A: z/{b,c,e_1,f}, y/{d,e_2} +# Commit B: y/{b,c,d} +# Expected: z/e_1, y/{b,c,d,e_2,f} + CONFLICT warning +# NOTE: While directory rename detection is active here causing z/f to +# become y/f, we did not apply this for z/e_1 because that would +# give us an add/add conflict for y/e_1 vs y/e_2. This problem with +# this add/add, is that both versions of y/e are from the same side +# of history, giving us no way to represent this conflict in the +# index. + +test_expect_success '5a-setup: Merge directories, other side adds files to original and target' ' + test_create_repo 5a && + ( + cd 5a && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir y && + echo d >y/d && + git add z y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e1 >z/e && + echo f >z/f && + echo e2 >y/e && + git add z/e z/f y/e && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/b y/ && + git mv z/c y/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5a-check: Merge directories, other side adds files to original and target' ' + ( + cd 5a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT.*implicit dir rename" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/d :0:y/e :0:z/e :0:y/f && + git rev-parse >expect \ + O:z/b O:z/c O:y/d A:y/e A:z/e A:z/f && + test_cmp expect actual + ) +' + +# Testcase 5b, Rename/delete in order to get add/add/add conflict +# (Related to testcase 8d; these may appear slightly inconsistent to users; +# Also related to testcases 7d and 7e) +# Commit O: z/{b,c,d_1} +# Commit A: y/{b,c,d_2} +# Commit B: z/{b,c,d_1,e}, y/d_3 +# Expected: y/{b,c,e}, CONFLICT(add/add: y/d_2 vs. y/d_3) +# NOTE: If z/d_1 in commit B were to be involved in dir rename detection, as +# we normaly would since z/ is being renamed to y/, then this would be +# a rename/delete (z/d_1 -> y/d_1 vs. deleted) AND an add/add/add +# conflict of y/d_1 vs. y/d_2 vs. y/d_3. Add/add/add is not +# representable in the index, so the existence of y/d_3 needs to +# cause us to bail on directory rename detection for that path, falling +# back to git behavior without the directory rename detection. + +test_expect_success '5b-setup: Rename/delete in order to get add/add/add conflict' ' + test_create_repo 5b && + ( + cd 5b && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d1 >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/d && + git mv z y && + echo d2 >y/d && + git add y/d && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y && + echo d3 >y/d && + echo e >z/e && + git add y/d z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5b-check: Rename/delete in order to get add/add/add conflict' ' + ( + cd 5b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (add/add).* y/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/e :2:y/d :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/e A:y/d B:y/d && + test_cmp expect actual && + + test_must_fail git rev-parse :1:y/d && + test_path_is_file y/d + ) +' + +# Testcase 5c, Transitive rename would cause rename/rename/rename/add/add/add +# (Directory rename detection would result in transitive rename vs. +# rename/rename(1to2) and turn it into a rename/rename(1to3). Further, +# rename paths conflict with separate adds on the other side) +# (Related to testcases 3b and 7c) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c,d_2}, w/d_1 +# Commit B: z/{b,c,d_1,e}, w/d_3, y/d_4 +# Expected: A mess, but only a rename/rename(1to2)/add/add mess. Use the +# presence of y/d_4 in B to avoid doing transitive rename of +# x/d_1 -> z/d_1 -> y/d_1, so that the only paths we have at +# y/d are y/d_2 and y/d_4. We still do the move from z/e to y/e, +# though, because it doesn't have anything in the way. + +test_expect_success '5c-setup: Transitive rename would cause rename/rename/rename/add/add/add' ' + test_create_repo 5c && + ( + cd 5c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d1 >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + echo d2 >y/d && + git add y/d && + git mv x w && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + mkdir w && + mkdir y && + echo d3 >w/d && + echo d4 >y/d && + echo e >z/e && + git add w/ y/ z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5c-check: Transitive rename would cause rename/rename/rename/add/add/add' ' + ( + cd 5c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*z/d" out && + test_i18ngrep "CONFLICT (add/add).* y/d" out && + + git ls-files -s >out && + test_line_count = 9 out && + git ls-files -u >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/e && + test_cmp expect actual && + + test_must_fail git rev-parse :1:y/d && + git rev-parse >actual \ + :2:w/d :3:w/d :1:x/d :2:y/d :3:y/d :3:z/d && + git rev-parse >expect \ + O:x/d B:w/d O:x/d A:y/d B:y/d O:x/d && + test_cmp expect actual && + + git hash-object >actual \ + w/d~HEAD w/d~B^0 z/d && + git rev-parse >expect \ + O:x/d B:w/d O:x/d && + test_cmp expect actual && + test_path_is_missing x/d && + test_path_is_file y/d && + grep -q "<<<<" y/d # conflict markers should be present + ) +' + +# Testcase 5d, Directory/file/file conflict due to directory rename +# Commit O: z/{b,c} +# Commit A: y/{b,c,d_1} +# Commit B: z/{b,c,d_2,f}, y/d/e +# Expected: y/{b,c,d/e,f}, z/d_2, CONFLICT(file/directory), y/d_1~HEAD +# Note: The fact that y/d/ exists in B makes us bail on directory rename +# detection for z/d_2, but that doesn't prevent us from applying the +# directory rename detection for z/f -> y/f. + +test_expect_success '5d-setup: Directory/file/file conflict due to directory rename' ' + test_create_repo 5d && + ( + cd 5d && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + echo d1 >y/d && + git add y/d && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir -p y/d && + echo e >y/d/e && + echo d2 >z/d && + echo f >z/f && + git add y/d/e z/d z/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5d-check: Directory/file/file conflict due to directory rename' ' + ( + cd 5d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (file/directory).*y/d" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:z/d :0:y/f :2:y/d :0:y/d/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/d B:z/f A:y/d B:y/d/e && + test_cmp expect actual && + + git hash-object y/d~HEAD >actual && + git rev-parse A:y/d >expect && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 5: +# +# If a subset of to-be-renamed files have a file or directory in the way, +# "turn off" the directory rename for those specific sub-paths, falling +# back to old handling. But, sadly, see testcases 8a and 8b. +########################################################################### + + +########################################################################### +# SECTION 6: Same side of the merge was the one that did the rename +# +# It may sound obvious that you only want to apply implicit directory +# renames to directories if the _other_ side of history did the renaming. +# If you did make an implementation that didn't explicitly enforce this +# rule, the majority of cases that would fall under this section would +# also be solved by following the rules from the above sections. But +# there are still a few that stick out, so this section covers them just +# to make sure we also get them right. +########################################################################### + +# Testcase 6a, Tricky rename/delete +# Commit O: z/{b,c,d} +# Commit A: z/b +# Commit B: y/{b,c}, z/d +# Expected: y/b, CONFLICT(rename/delete, z/c -> y/c vs. NULL) +# Note: We're just checking here that the rename of z/b and z/c to put +# them under y/ doesn't accidentally catch z/d and make it look like +# it is also involved in a rename/delete conflict. + +test_expect_success '6a-setup: Tricky rename/delete' ' + test_create_repo 6a && + ( + cd 6a && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/c && + git rm z/d && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y && + git mv z/b y/ && + git mv z/c y/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6a-check: Tricky rename/delete' ' + ( + cd 6a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/delete).*z/c.*y/c" out && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :3:y/c && + git rev-parse >expect \ + O:z/b O:z/c && + test_cmp expect actual + ) +' + +# Testcase 6b, Same rename done on both sides +# (Related to testcases 6c and 8e) +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: y/{b,c}, z/d +# Expected: y/{b,c}, z/d +# Note: If we did directory rename detection here, we'd move z/d into y/, +# but B did that rename and still decided to put the file into z/, +# so we probably shouldn't apply directory rename detection for it. + +test_expect_success '6b-setup: Same rename done on both sides' ' + test_create_repo 6b && + ( + cd 6b && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z y && + mkdir z && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6b-check: Same rename done on both sides' ' + ( + cd 6b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/d && + test_cmp expect actual + ) +' + +# Testcase 6c, Rename only done on same side +# (Related to testcases 6b and 8e) +# Commit O: z/{b,c} +# Commit A: z/{b,c} (no change) +# Commit B: y/{b,c}, z/d +# Expected: y/{b,c}, z/d +# NOTE: Seems obvious, but just checking that the implementation doesn't +# "accidentally detect a rename" and give us y/{b,c,d}. + +test_expect_success '6c-setup: Rename only done on same side' ' + test_create_repo 6c && + ( + cd 6c && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + git mv z y && + mkdir z && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6c-check: Rename only done on same side' ' + ( + cd 6c && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/d && + test_cmp expect actual + ) +' + +# Testcase 6d, We don't always want transitive renaming +# (Related to testcase 1c) +# Commit O: z/{b,c}, x/d +# Commit A: z/{b,c}, x/d (no change) +# Commit B: y/{b,c}, z/d +# Expected: y/{b,c}, z/d +# NOTE: Again, this seems obvious but just checking that the implementation +# doesn't "accidentally detect a rename" and give us y/{b,c,d}. + +test_expect_success '6d-setup: We do not always want transitive renaming' ' + test_create_repo 6d && + ( + cd 6d && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + git mv z y && + git mv x z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6d-check: We do not always want transitive renaming' ' + ( + cd 6d && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d && + test_cmp expect actual + ) +' + +# Testcase 6e, Add/add from one-side +# Commit O: z/{b,c} +# Commit A: z/{b,c} (no change) +# Commit B: y/{b,c,d_1}, z/d_2 +# Expected: y/{b,c,d_1}, z/d_2 +# NOTE: Again, this seems obvious but just checking that the implementation +# doesn't "accidentally detect a rename" and give us y/{b,c} + +# add/add conflict on y/d_1 vs y/d_2. + +test_expect_success '6e-setup: Add/add from one side' ' + test_create_repo 6e && + ( + cd 6e && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + git mv z y && + echo d1 > y/d && + mkdir z && + echo d2 > z/d && + git add y/d z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6e-check: Add/add from one side' ' + ( + cd 6e && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:y/d B:z/d && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 6: +# +# Only apply implicit directory renames to directories if the other +# side of history is the one doing the renaming. +########################################################################### + + +########################################################################### +# SECTION 7: More involved Edge/Corner cases +# +# The ruleset we have generated in the above sections seems to provide +# well-defined merges. But can we find edge/corner cases that either (a) +# are harder for users to understand, or (b) have a resolution that is +# non-intuitive or suboptimal? +# +# The testcases in this section dive into cases that I've tried to craft in +# a way to find some that might be surprising to users or difficult for +# them to understand (the next section will look at non-intuitive or +# suboptimal merge results). Some of the testcases are similar to ones +# from past sections, but have been simplified to try to highlight error +# messages using a "modified" path (due to the directory rename). Are +# users okay with these? +# +# In my opinion, testcases that are difficult to understand from this +# section is due to difficulty in the testcase rather than the directory +# renaming (similar to how t6042 and t6036 have difficult resolutions due +# to the problem setup itself being complex). And I don't think the +# error messages are a problem. +# +# On the other hand, the testcases in section 8 worry me slightly more... +########################################################################### + +# Testcase 7a, rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: w/b, x/c, z/d +# Expected: y/d, CONFLICT(rename/rename for both z/b and z/c) +# NOTE: There's a rename of z/ here, y/ has more renames, so z/d -> y/d. + +test_expect_success '7a-setup: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' + test_create_repo 7a && + ( + cd 7a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir w && + mkdir x && + git mv z/b w/ && + git mv z/c x/ && + echo d > z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7a-check: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' + ( + cd 7a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename).*z/b.*y/b.*w/b" out && + test_i18ngrep "CONFLICT (rename/rename).*z/c.*y/c.*x/c" out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :1:z/b :2:y/b :3:w/b :1:z/c :2:y/c :3:x/c :0:y/d && + git rev-parse >expect \ + O:z/b O:z/b O:z/b O:z/c O:z/c O:z/c B:z/d && + test_cmp expect actual && + + git hash-object >actual \ + y/b w/b y/c x/c && + git rev-parse >expect \ + O:z/b O:z/b O:z/c O:z/c && + test_cmp expect actual + ) +' + +# Testcase 7b, rename/rename(2to1), but only due to transitive rename +# (Related to testcase 1d) +# Commit O: z/{b,c}, x/d_1, w/d_2 +# Commit A: y/{b,c,d_2}, x/d_1 +# Commit B: z/{b,c,d_1}, w/d_2 +# Expected: y/{b,c}, CONFLICT(rename/rename(2to1): x/d_1, w/d_2 -> y_d) + +test_expect_success '7b-setup: rename/rename(2to1), but only due to transitive rename' ' + test_create_repo 7b && + ( + cd 7b && + + mkdir z && + mkdir x && + mkdir w && + echo b >z/b && + echo c >z/c && + echo d1 > x/d && + echo d2 > w/d && + git add z x w && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv w/d y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7b-check: rename/rename(2to1), but only due to transitive rename' ' + ( + cd 7b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename)" out && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :2:y/d :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:w/d O:x/d && + test_cmp expect actual && + + test_path_is_missing y/d && + test_path_is_file y/d~HEAD && + test_path_is_file y/d~B^0 && + + git hash-object >actual \ + y/d~HEAD y/d~B^0 && + git rev-parse >expect \ + O:w/d O:x/d && + test_cmp expect actual + ) +' + +# Testcase 7c, rename/rename(1to...2or3); transitive rename may add complexity +# (Related to testcases 3b and 5c) +# Commit O: z/{b,c}, x/d +# Commit A: y/{b,c}, w/d +# Commit B: z/{b,c,d} +# Expected: y/{b,c}, CONFLICT(x/d -> w/d vs. y/d) +# NOTE: z/ was renamed to y/ so we do want to report +# neither CONFLICT(x/d -> w/d vs. z/d) +# nor CONFLiCT x/d -> w/d vs. y/d vs. z/d) + +test_expect_success '7c-setup: rename/rename(1to...2or3); transitive rename may add complexity' ' + test_create_repo 7c && + ( + cd 7c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv x w && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7c-check: rename/rename(1to...2or3); transitive rename may add complexity' ' + ( + cd 7c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*y/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :1:x/d :2:w/d :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d O:x/d O:x/d && + test_cmp expect actual + ) +' + +# Testcase 7d, transitive rename involved in rename/delete; how is it reported? +# (Related somewhat to testcases 5b and 8d) +# Commit O: z/{b,c}, x/d +# Commit A: y/{b,c} +# Commit B: z/{b,c,d} +# Expected: y/{b,c}, CONFLICT(delete x/d vs rename to y/d) +# NOTE: z->y so NOT CONFLICT(delete x/d vs rename to z/d) + +test_expect_success '7d-setup: transitive rename involved in rename/delete; how is it reported?' ' + test_create_repo 7d && + ( + cd 7d && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git rm -rf x && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7d-check: transitive rename involved in rename/delete; how is it reported?' ' + ( + cd 7d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d && + test_cmp expect actual + ) +' + +# Testcase 7e, transitive rename in rename/delete AND dirs in the way +# (Very similar to 'both rename source and destination involved in D/F conflict' from t6022-merge-rename.sh) +# (Also related to testcases 9c and 9d) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c,d/g}, x/d/f +# Commit B: z/{b,c,d_1} +# Expected: rename/delete(x/d_1->y/d_1 vs. None) + D/F conflict on y/d +# y/{b,c,d/g}, y/d_1~B^0, x/d/f + +# NOTE: The main path of interest here is d_1 and where it ends up, but +# this is actually a case that has two potential directory renames +# involved and D/F conflict(s), so it makes sense to walk through +# each step. +# +# Commit A renames z/ -> y/. Thus everything that B adds to z/ +# should be instead moved to y/. This gives us the D/F conflict on +# y/d because x/d_1 -> z/d_1 -> y/d_1 conflicts with y/d/g. +# +# Further, commit B renames x/ -> z/, thus everything A adds to x/ +# should instead be moved to z/...BUT we removed z/ and renamed it +# to y/, so maybe everything should move not from x/ to z/, but +# from x/ to z/ to y/. Doing so might make sense from the logic so +# far, but note that commit A had both an x/ and a y/; it did the +# renaming of z/ to y/ and created x/d/f and it clearly made these +# things separate, so it doesn't make much sense to push these +# together. Doing so is what I'd call a doubly transitive rename; +# see testcases 9c and 9d for further discussion of this issue and +# how it's resolved. + +test_expect_success '7e-setup: transitive rename in rename/delete AND dirs in the way' ' + test_create_repo 7e && + ( + cd 7e && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d1 >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git rm x/d && + mkdir -p x/d && + mkdir -p y/d && + echo f >x/d/f && + echo g >y/d/g && + git add x/d/f y/d/g && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7e-check: transitive rename in rename/delete AND dirs in the way' ' + ( + cd 7e && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :0:x/d/f :0:y/d/g :0:y/b :0:y/c :3:y/d && + git rev-parse >expect \ + A:x/d/f A:y/d/g O:z/b O:z/c O:x/d && + test_cmp expect actual && + + git hash-object y/d~B^0 >actual && + git rev-parse O:x/d >expect && + test_cmp expect actual + ) +' + +########################################################################### +# SECTION 8: Suboptimal merges +# +# As alluded to in the last section, the ruleset we have built up for +# detecting directory renames unfortunately has some special cases where it +# results in slightly suboptimal or non-intuitive behavior. This section +# explores these cases. +# +# To be fair, we already had non-intuitive or suboptimal behavior for most +# of these cases in git before introducing implicit directory rename +# detection, but it'd be nice if there was a modified ruleset out there +# that handled these cases a bit better. +########################################################################### + +# Testcase 8a, Dual-directory rename, one into the others' way +# Commit O. x/{a,b}, y/{c,d} +# Commit A. x/{a,b,e}, y/{c,d,f} +# Commit B. y/{a,b}, z/{c,d} +# +# Possible Resolutions: +# w/o dir-rename detection: y/{a,b,f}, z/{c,d}, x/e +# Currently expected: y/{a,b,e,f}, z/{c,d} +# Optimal: y/{a,b,e}, z/{c,d,f} +# +# Note: Both x and y got renamed and it'd be nice to detect both, and we do +# better with directory rename detection than git did without, but the +# simple rule from section 5 prevents me from handling this as optimally as +# we potentially could. + +test_expect_success '8a-setup: Dual-directory rename, one into the others way' ' + test_create_repo 8a && + ( + cd 8a && + + mkdir x && + mkdir y && + echo a >x/a && + echo b >x/b && + echo c >y/c && + echo d >y/d && + git add x y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e >x/e && + echo f >y/f && + git add x/e y/f && + test_tick && + git commit -m "A" && + + git checkout B && + git mv y z && + git mv x y && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8a-check: Dual-directory rename, one into the others way' ' + ( + cd 8a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/a HEAD:y/b HEAD:y/e HEAD:y/f HEAD:z/c HEAD:z/d && + git rev-parse >expect \ + O:x/a O:x/b A:x/e A:y/f O:y/c O:y/d && + test_cmp expect actual + ) +' + +# Testcase 8b, Dual-directory rename, one into the others' way, with conflicting filenames +# Commit O. x/{a_1,b_1}, y/{a_2,b_2} +# Commit A. x/{a_1,b_1,e_1}, y/{a_2,b_2,e_2} +# Commit B. y/{a_1,b_1}, z/{a_2,b_2} +# +# w/o dir-rename detection: y/{a_1,b_1,e_2}, z/{a_2,b_2}, x/e_1 +# Currently expected: <same> +# Scary: y/{a_1,b_1}, z/{a_2,b_2}, CONFLICT(add/add, e_1 vs. e_2) +# Optimal: y/{a_1,b_1,e_1}, z/{a_2,b_2,e_2} +# +# Note: Very similar to 8a, except instead of 'e' and 'f' in directories x and +# y, both are named 'e'. Without directory rename detection, neither file +# moves directories. Implement directory rename detection suboptimally, and +# you get an add/add conflict, but both files were added in commit A, so this +# is an add/add conflict where one side of history added both files -- +# something we can't represent in the index. Obviously, we'd prefer the last +# resolution, but our previous rules are too coarse to allow it. Using both +# the rules from section 4 and section 5 save us from the Scary resolution, +# making us fall back to pre-directory-rename-detection behavior for both +# e_1 and e_2. + +test_expect_success '8b-setup: Dual-directory rename, one into the others way, with conflicting filenames' ' + test_create_repo 8b && + ( + cd 8b && + + mkdir x && + mkdir y && + echo a1 >x/a && + echo b1 >x/b && + echo a2 >y/a && + echo b2 >y/b && + git add x y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e1 >x/e && + echo e2 >y/e && + git add x/e y/e && + test_tick && + git commit -m "A" && + + git checkout B && + git mv y z && + git mv x y && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8b-check: Dual-directory rename, one into the others way, with conflicting filenames' ' + ( + cd 8b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/a HEAD:y/b HEAD:z/a HEAD:z/b HEAD:x/e HEAD:y/e && + git rev-parse >expect \ + O:x/a O:x/b O:y/a O:y/b A:x/e A:y/e && + test_cmp expect actual + ) +' + +# Testcase 8c, modify/delete or rename+modify/delete? +# (Related to testcases 5b, 8d, and 9h) +# Commit O: z/{b,c,d} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d_modified,e} +# Expected: y/{b,c,e}, CONFLICT(modify/delete: on z/d) +# +# Note: It could easily be argued that the correct resolution here is +# y/{b,c,e}, CONFLICT(rename/delete: z/d -> y/d vs deleted) +# and that the modifed version of d should be present in y/ after +# the merge, just marked as conflicted. Indeed, I previously did +# argue that. But applying directory renames to the side of +# history where a file is merely modified results in spurious +# rename/rename(1to2) conflicts -- see testcase 9h. See also +# notes in 8d. + +test_expect_success '8c-setup: modify/delete or rename+modify/delete?' ' + test_create_repo 8c && + ( + cd 8c && + + mkdir z && + echo b >z/b && + echo c >z/c && + test_seq 1 10 >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/d && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo 11 >z/d && + test_chmod +x z/d && + echo e >z/e && + git add z/d z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8c-check: modify/delete or rename+modify/delete' ' + ( + cd 8c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (modify/delete).* z/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/e :1:z/d :3:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/e O:z/d B:z/d && + test_cmp expect actual && + + test_must_fail git rev-parse :2:z/d && + git ls-files -s z/d | grep ^100755 && + test_path_is_file z/d && + test_path_is_missing y/d + ) +' + +# Testcase 8d, rename/delete...or not? +# (Related to testcase 5b; these may appear slightly inconsistent to users; +# Also related to testcases 7d and 7e) +# Commit O: z/{b,c,d} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d,e} +# Expected: y/{b,c,e} +# +# Note: It would also be somewhat reasonable to resolve this as +# y/{b,c,e}, CONFLICT(rename/delete: x/d -> y/d or deleted) +# +# In this case, I'm leaning towards: commit A was the one that deleted z/d +# and it did the rename of z to y, so the two "conflicts" (rename vs. +# delete) are both coming from commit A, which is illogical. Conflicts +# during merging are supposed to be about opposite sides doing things +# differently. + +test_expect_success '8d-setup: rename/delete...or not?' ' + test_create_repo 8d && + ( + cd 8d && + + mkdir z && + echo b >z/b && + echo c >z/c && + test_seq 1 10 >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/d && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo e >z/e && + git add z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8d-check: rename/delete...or not?' ' + ( + cd 8d && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/e && + test_cmp expect actual + ) +' + +# Testcase 8e, Both sides rename, one side adds to original directory +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: w/{b,c}, z/d +# +# Possible Resolutions: +# w/o dir-rename detection: z/d, CONFLICT(z/b -> y/b vs. w/b), +# CONFLICT(z/c -> y/c vs. w/c) +# Currently expected: y/d, CONFLICT(z/b -> y/b vs. w/b), +# CONFLICT(z/c -> y/c vs. w/c) +# Optimal: ?? +# +# Notes: In commit A, directory z got renamed to y. In commit B, directory z +# did NOT get renamed; the directory is still present; instead it is +# considered to have just renamed a subset of paths in directory z +# elsewhere. Therefore, the directory rename done in commit A to z/ +# applies to z/d and maps it to y/d. +# +# It's possible that users would get confused about this, but what +# should we do instead? Silently leaving at z/d seems just as bad or +# maybe even worse. Perhaps we could print a big warning about z/d +# and how we're moving to y/d in this case, but when I started thinking +# about the ramifications of doing that, I didn't know how to rule out +# that opening other weird edge and corner cases so I just punted. + +test_expect_success '8e-setup: Both sides rename, one side adds to original directory' ' + test_create_repo 8e && + ( + cd 8e && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z w && + mkdir z && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8e-check: Both sides rename, one side adds to original directory' ' + ( + cd 8e && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep CONFLICT.*rename/rename.*z/c.*y/c.*w/c out && + test_i18ngrep CONFLICT.*rename/rename.*z/b.*y/b.*w/b out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :1:z/b :2:y/b :3:w/b :1:z/c :2:y/c :3:w/c :0:y/d && + git rev-parse >expect \ + O:z/b O:z/b O:z/b O:z/c O:z/c O:z/c B:z/d && + test_cmp expect actual && + + git hash-object >actual \ + y/b w/b y/c w/c && + git rev-parse >expect \ + O:z/b O:z/b O:z/c O:z/c && + test_cmp expect actual && + + test_path_is_missing z/b && + test_path_is_missing z/c + ) +' + +########################################################################### +# SECTION 9: Other testcases +# +# This section consists of miscellaneous testcases I thought of during +# the implementation which round out the testing. +########################################################################### + +# Testcase 9a, Inner renamed directory within outer renamed directory +# (Related to testcase 1f) +# Commit O: z/{b,c,d/{e,f,g}} +# Commit A: y/{b,c}, x/w/{e,f,g} +# Commit B: z/{b,c,d/{e,f,g,h},i} +# Expected: y/{b,c,i}, x/w/{e,f,g,h} +# NOTE: The only reason this one is interesting is because when a directory +# is split into multiple other directories, we determine by the weight +# of which one had the most paths going to it. A naive implementation +# of that could take the new file in commit B at z/i to x/w/i or x/i. + +test_expect_success '9a-setup: Inner renamed directory within outer renamed directory' ' + test_create_repo 9a && + ( + cd 9a && + + mkdir -p z/d && + echo b >z/b && + echo c >z/c && + echo e >z/d/e && + echo f >z/d/f && + echo g >z/d/g && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir x && + git mv z/d x/w && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo h >z/d/h && + echo i >z/i && + git add z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9a-check: Inner renamed directory within outer renamed directory' ' + ( + cd 9a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/i && + git rev-parse >expect \ + O:z/b O:z/c B:z/i && + test_cmp expect actual && + + git rev-parse >actual \ + HEAD:x/w/e HEAD:x/w/f HEAD:x/w/g HEAD:x/w/h && + git rev-parse >expect \ + O:z/d/e O:z/d/f O:z/d/g B:z/d/h && + test_cmp expect actual + ) +' + +# Testcase 9b, Transitive rename with content merge +# (Related to testcase 1c) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c}, x/d_2 +# Commit B: z/{b,c,d_3} +# Expected: y/{b,c,d_merged} + +test_expect_success '9b-setup: Transitive rename with content merge' ' + test_create_repo 9b && + ( + cd 9b && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + test_seq 1 10 >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_seq 1 11 >x/d && + git add x/d && + test_tick && + git commit -m "A" && + + git checkout B && + test_seq 0 10 >x/d && + git mv x/d z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9b-check: Transitive rename with content merge' ' + ( + cd 9b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + test_seq 0 11 >expected && + test_cmp expected y/d && + git add expected && + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d && + git rev-parse >expect \ + O:z/b O:z/c :0:expected && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:x/d && + test_must_fail git rev-parse HEAD:z/d && + test_path_is_missing z/d && + + test $(git rev-parse HEAD:y/d) != $(git rev-parse O:x/d) && + test $(git rev-parse HEAD:y/d) != $(git rev-parse A:x/d) && + test $(git rev-parse HEAD:y/d) != $(git rev-parse B:z/d) + ) +' + +# Testcase 9c, Doubly transitive rename? +# (Related to testcase 1c, 7e, and 9d) +# Commit O: z/{b,c}, x/{d,e}, w/f +# Commit A: y/{b,c}, x/{d,e,f,g} +# Commit B: z/{b,c,d,e}, w/f +# Expected: y/{b,c,d,e}, x/{f,g} +# +# NOTE: x/f and x/g may be slightly confusing here. The rename from w/f to +# x/f is clear. Let's look beyond that. Here's the logic: +# Commit B renamed x/ -> z/ +# Commit A renamed z/ -> y/ +# So, we could possibly further rename x/f to z/f to y/f, a doubly +# transient rename. However, where does it end? We can chain these +# indefinitely (see testcase 9d). What if there is a D/F conflict +# at z/f/ or y/f/? Or just another file conflict at one of those +# paths? In the case of an N-long chain of transient renamings, +# where do we "abort" the rename at? Can the user make sense of +# the resulting conflict and resolve it? +# +# To avoid this confusion I use the simple rule that if the other side +# of history did a directory rename to a path that your side renamed +# away, then ignore that particular rename from the other side of +# history for any implicit directory renames. + +test_expect_success '9c-setup: Doubly transitive rename?' ' + test_create_repo 9c && + ( + cd 9c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + echo e >x/e && + mkdir w && + echo f >w/f && + git add z x w && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv w/f x/ && + echo g >x/g && + git add x/g && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/d && + git mv x/e z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9c-check: Doubly transitive rename?' ' + ( + cd 9c && + + git checkout A^0 && + + git merge -s recursive B^0 >out && + test_i18ngrep "WARNING: Avoiding applying x -> z rename to x/f" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:y/e HEAD:x/f HEAD:x/g && + git rev-parse >expect \ + O:z/b O:z/c O:x/d O:x/e O:w/f A:x/g && + test_cmp expect actual + ) +' + +# Testcase 9d, N-fold transitive rename? +# (Related to testcase 9c...and 1c and 7e) +# Commit O: z/a, y/b, x/c, w/d, v/e, u/f +# Commit A: y/{a,b}, w/{c,d}, u/{e,f} +# Commit B: z/{a,t}, x/{b,c}, v/{d,e}, u/f +# Expected: <see NOTE first> +# +# NOTE: z/ -> y/ (in commit A) +# y/ -> x/ (in commit B) +# x/ -> w/ (in commit A) +# w/ -> v/ (in commit B) +# v/ -> u/ (in commit A) +# So, if we add a file to z, say z/t, where should it end up? In u? +# What if there's another file or directory named 't' in one of the +# intervening directories and/or in u itself? Also, shouldn't the +# same logic that places 't' in u/ also move ALL other files to u/? +# What if there are file or directory conflicts in any of them? If +# we attempted to do N-way (N-fold? N-ary? N-uple?) transitive renames +# like this, would the user have any hope of understanding any +# conflicts or how their working tree ended up? I think not, so I'm +# ruling out N-ary transitive renames for N>1. +# +# Therefore our expected result is: +# z/t, y/a, x/b, w/c, u/d, u/e, u/f +# The reason that v/d DOES get transitively renamed to u/d is that u/ isn't +# renamed somewhere. A slightly sub-optimal result, but it uses fairly +# simple rules that are consistent with what we need for all the other +# testcases and simplifies things for the user. + +test_expect_success '9d-setup: N-way transitive rename?' ' + test_create_repo 9d && + ( + cd 9d && + + mkdir z y x w v u && + echo a >z/a && + echo b >y/b && + echo c >x/c && + echo d >w/d && + echo e >v/e && + echo f >u/f && + git add z y x w v u && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/a y/ && + git mv x/c w/ && + git mv v/e u/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo t >z/t && + git mv y/b x/ && + git mv w/d v/ && + git add z/t && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9d-check: N-way transitive rename?' ' + ( + cd 9d && + + git checkout A^0 && + + git merge -s recursive B^0 >out && + test_i18ngrep "WARNING: Avoiding applying z -> y rename to z/t" out && + test_i18ngrep "WARNING: Avoiding applying y -> x rename to y/a" out && + test_i18ngrep "WARNING: Avoiding applying x -> w rename to x/b" out && + test_i18ngrep "WARNING: Avoiding applying w -> v rename to w/c" out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:z/t \ + HEAD:y/a HEAD:x/b HEAD:w/c \ + HEAD:u/d HEAD:u/e HEAD:u/f && + git rev-parse >expect \ + B:z/t \ + O:z/a O:y/b O:x/c \ + O:w/d O:v/e A:u/f && + test_cmp expect actual + ) +' + +# Testcase 9e, N-to-1 whammo +# (Related to testcase 9c...and 1c and 7e) +# Commit O: dir1/{a,b}, dir2/{d,e}, dir3/{g,h}, dirN/{j,k} +# Commit A: dir1/{a,b,c,yo}, dir2/{d,e,f,yo}, dir3/{g,h,i,yo}, dirN/{j,k,l,yo} +# Commit B: combined/{a,b,d,e,g,h,j,k} +# Expected: combined/{a,b,c,d,e,f,g,h,i,j,k,l}, CONFLICT(Nto1) warnings, +# dir1/yo, dir2/yo, dir3/yo, dirN/yo + +test_expect_success '9e-setup: N-to-1 whammo' ' + test_create_repo 9e && + ( + cd 9e && + + mkdir dir1 dir2 dir3 dirN && + echo a >dir1/a && + echo b >dir1/b && + echo d >dir2/d && + echo e >dir2/e && + echo g >dir3/g && + echo h >dir3/h && + echo j >dirN/j && + echo k >dirN/k && + git add dir* && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo c >dir1/c && + echo yo >dir1/yo && + echo f >dir2/f && + echo yo >dir2/yo && + echo i >dir3/i && + echo yo >dir3/yo && + echo l >dirN/l && + echo yo >dirN/yo && + git add dir* && + test_tick && + git commit -m "A" && + + git checkout B && + git mv dir1 combined && + git mv dir2/* combined/ && + git mv dir3/* combined/ && + git mv dirN/* combined/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success C_LOCALE_OUTPUT '9e-check: N-to-1 whammo' ' + ( + cd 9e && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + grep "CONFLICT (implicit dir rename): Cannot map more than one path to combined/yo" out >error_line && + grep -q dir1/yo error_line && + grep -q dir2/yo error_line && + grep -q dir3/yo error_line && + grep -q dirN/yo error_line && + + git ls-files -s >out && + test_line_count = 16 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :0:combined/a :0:combined/b :0:combined/c \ + :0:combined/d :0:combined/e :0:combined/f \ + :0:combined/g :0:combined/h :0:combined/i \ + :0:combined/j :0:combined/k :0:combined/l && + git rev-parse >expect \ + O:dir1/a O:dir1/b A:dir1/c \ + O:dir2/d O:dir2/e A:dir2/f \ + O:dir3/g O:dir3/h A:dir3/i \ + O:dirN/j O:dirN/k A:dirN/l && + test_cmp expect actual && + + git rev-parse >actual \ + :0:dir1/yo :0:dir2/yo :0:dir3/yo :0:dirN/yo && + git rev-parse >expect \ + A:dir1/yo A:dir2/yo A:dir3/yo A:dirN/yo && + test_cmp expect actual + ) +' + +# Testcase 9f, Renamed directory that only contained immediate subdirs +# (Related to testcases 1e & 9g) +# Commit O: goal/{a,b}/$more_files +# Commit A: priority/{a,b}/$more_files +# Commit B: goal/{a,b}/$more_files, goal/c +# Expected: priority/{a,b}/$more_files, priority/c + +test_expect_success '9f-setup: Renamed directory that only contained immediate subdirs' ' + test_create_repo 9f && + ( + cd 9f && + + mkdir -p goal/a && + mkdir -p goal/b && + echo foo >goal/a/foo && + echo bar >goal/b/bar && + echo baz >goal/b/baz && + git add goal && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv goal/ priority && + test_tick && + git commit -m "A" && + + git checkout B && + echo c >goal/c && + git add goal/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9f-check: Renamed directory that only contained immediate subdirs' ' + ( + cd 9f && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:priority/a/foo \ + HEAD:priority/b/bar \ + HEAD:priority/b/baz \ + HEAD:priority/c && + git rev-parse >expect \ + O:goal/a/foo \ + O:goal/b/bar \ + O:goal/b/baz \ + B:goal/c && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:goal/c + ) +' + +# Testcase 9g, Renamed directory that only contained immediate subdirs, immediate subdirs renamed +# (Related to testcases 1e & 9f) +# Commit O: goal/{a,b}/$more_files +# Commit A: priority/{alpha,bravo}/$more_files +# Commit B: goal/{a,b}/$more_files, goal/c +# Expected: priority/{alpha,bravo}/$more_files, priority/c + +test_expect_success '9g-setup: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' + test_create_repo 9g && + ( + cd 9g && + + mkdir -p goal/a && + mkdir -p goal/b && + echo foo >goal/a/foo && + echo bar >goal/b/bar && + echo baz >goal/b/baz && + git add goal && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir priority && + git mv goal/a/ priority/alpha && + git mv goal/b/ priority/beta && + rmdir goal/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo c >goal/c && + git add goal/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_failure '9g-check: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' + ( + cd 9g && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:priority/alpha/foo \ + HEAD:priority/beta/bar \ + HEAD:priority/beta/baz \ + HEAD:priority/c && + git rev-parse >expect \ + O:goal/a/foo \ + O:goal/b/bar \ + O:goal/b/baz \ + B:goal/c && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:goal/c + ) +' + +# Testcase 9h, Avoid implicit rename if involved as source on other side +# (Extremely closely related to testcase 3a) +# Commit O: z/{b,c,d_1} +# Commit A: z/{b,c,d_2} +# Commit B: y/{b,c}, x/d_1 +# Expected: y/{b,c}, x/d_2 +# NOTE: If we applied the z/ -> y/ rename to z/d, then we'd end up with +# a rename/rename(1to2) conflict (z/d -> y/d vs. x/d) +test_expect_success '9h-setup: Avoid dir rename on merely modified path' ' + test_create_repo 9h && + ( + cd 9h && + + mkdir z && + echo b >z/b && + echo c >z/c && + printf "1\n2\n3\n4\n5\n6\n7\n8\nd\n" >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + echo more >>z/d && + git add z/d && + git commit -m "A" && + + git checkout B && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9h-check: Avoid dir rename on merely modified path' ' + ( + cd 9h && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:x/d && + git rev-parse >expect \ + O:z/b O:z/c A:z/d && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 9: +# +# If the other side of history did a directory rename to a path that your +# side renamed away, then ignore that particular rename from the other +# side of history for any implicit directory renames. +########################################################################### + +########################################################################### +# SECTION 10: Handling untracked files +# +# unpack_trees(), upon which the recursive merge algorithm is based, aborts +# the operation if untracked or dirty files would be deleted or overwritten +# by the merge. Unfortunately, unpack_trees() does not understand renames, +# and if it doesn't abort, then it muddies up the working directory before +# we even get to the point of detecting renames, so we need some special +# handling, at least in the case of directory renames. +########################################################################### + +# Testcase 10a, Overwrite untracked: normal rename/delete +# Commit O: z/{b,c_1} +# Commit A: z/b + untracked z/c + untracked z/d +# Commit B: z/{b,d_1} +# Expected: Aborted Merge + +# ERROR_MSG(untracked working tree files would be overwritten by merge) + +test_expect_success '10a-setup: Overwrite untracked with normal rename/delete' ' + test_create_repo 10a && + ( + cd 10a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/c z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10a-check: Overwrite untracked with normal rename/delete' ' + ( + cd 10a && + + git checkout A^0 && + echo very >z/c && + echo important >z/d && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "The following untracked working tree files would be overwritten by merge" err && + + git ls-files -s >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 4 out && + + echo very >expect && + test_cmp expect z/c && + + echo important >expect && + test_cmp expect z/d && + + git rev-parse HEAD:z/b >actual && + git rev-parse O:z/b >expect && + test_cmp expect actual + ) +' + +# Testcase 10b, Overwrite untracked: dir rename + delete +# Commit O: z/{b,c_1} +# Commit A: y/b + untracked y/{c,d,e} +# Commit B: z/{b,d_1,e} +# Expected: Failed Merge; y/b + untracked y/c + untracked y/d on disk + +# z/c_1 -> z/d_1 rename recorded at stage 3 for y/d + +# ERROR_MSG(refusing to lose untracked file at 'y/d') + +test_expect_success '10b-setup: Overwrite untracked with dir rename + delete' ' + test_create_repo 10b && + ( + cd 10b && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/c && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/c z/d && + echo e >z/e && + git add z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10b-check: Overwrite untracked with dir rename + delete' ' + ( + cd 10b && + + git checkout A^0 && + echo very >y/c && + echo important >y/d && + echo contents >y/e && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/delete).*Version B\^0 of y/d left in tree at y/d~B\^0" out && + test_i18ngrep "Error: Refusing to lose untracked file at y/e; writing to y/e~B\^0 instead" out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 5 out && + + git rev-parse >actual \ + :0:y/b :3:y/d :3:y/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/e && + test_cmp expect actual && + + echo very >expect && + test_cmp expect y/c && + + echo important >expect && + test_cmp expect y/d && + + echo contents >expect && + test_cmp expect y/e + ) +' + +# Testcase 10c, Overwrite untracked: dir rename/rename(1to2) +# Commit O: z/{a,b}, x/{c,d} +# Commit A: y/{a,b}, w/c, x/d + different untracked y/c +# Commit B: z/{a,b,c}, x/d +# Expected: Failed Merge; y/{a,b} + x/d + untracked y/c + +# CONFLICT(rename/rename) x/c -> w/c vs y/c + +# y/c~B^0 + +# ERROR_MSG(Refusing to lose untracked file at y/c) + +test_expect_success '10c-setup: Overwrite untracked with dir rename/rename(1to2)' ' + test_create_repo 10c && + ( + cd 10c && + + mkdir z x && + echo a >z/a && + echo b >z/b && + echo c >x/c && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir w && + git mv x/c w/c && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/c z/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2)' ' + ( + cd 10c && + + git checkout A^0 && + echo important >y/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose untracked file at y/c; adding as y/c~B\^0 instead" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:x/d :1:x/c :2:w/c :3:y/c && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/c O:x/c O:x/c && + test_cmp expect actual && + + git hash-object y/c~B^0 >actual && + git rev-parse O:x/c >expect && + test_cmp expect actual && + + echo important >expect && + test_cmp expect y/c + ) +' + +# Testcase 10d, Delete untracked w/ dir rename/rename(2to1) +# Commit O: z/{a,b,c_1}, x/{d,e,f_2} +# Commit A: y/{a,b}, x/{d,e,f_2,wham_1} + untracked y/wham +# Commit B: z/{a,b,c_1,wham_2}, y/{d,e} +# Expected: Failed Merge; y/{a,b,d,e} + untracked y/{wham,wham~B^0,wham~HEAD}+ +# CONFLICT(rename/rename) z/c_1 vs x/f_2 -> y/wham +# ERROR_MSG(Refusing to lose untracked file at y/wham) + +test_expect_success '10d-setup: Delete untracked with dir rename/rename(2to1)' ' + test_create_repo 10d && + ( + cd 10d && + + mkdir z x && + echo a >z/a && + echo b >z/b && + echo c >z/c && + echo d >x/d && + echo e >x/e && + echo f >x/f && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/c x/wham && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/f z/wham && + git mv x/ y/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' + ( + cd 10d && + + git checkout A^0 && + echo important >y/wham && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose untracked file at y/wham" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 4 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:y/d :0:y/e :2:y/wham :3:y/wham && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/e O:z/c O:x/f && + test_cmp expect actual && + + test_must_fail git rev-parse :1:y/wham && + + echo important >expect && + test_cmp expect y/wham && + + git hash-object >actual \ + y/wham~B^0 y/wham~HEAD && + git rev-parse >expect \ + O:x/f O:z/c && + test_cmp expect actual + ) +' + +# Testcase 10e, Does git complain about untracked file that's not in the way? +# Commit O: z/{a,b} +# Commit A: y/{a,b} + untracked z/c +# Commit B: z/{a,b,c} +# Expected: y/{a,b,c} + untracked z/c + +test_expect_success '10e-setup: Does git complain about untracked file that is not really in the way?' ' + test_create_repo 10e && + ( + cd 10e && + + mkdir z && + echo a >z/a && + echo b >z/b && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo c >z/c && + git add z/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_failure '10e-check: Does git complain about untracked file that is not really in the way?' ' + ( + cd 10e && + + git checkout A^0 && + mkdir z && + echo random >z/c && + + git merge -s recursive B^0 >out 2>err && + test_i18ngrep ! "following untracked working tree files would be overwritten by merge" err && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:y/c && + git rev-parse >expect \ + O:z/a O:z/b B:z/c && + test_cmp expect actual && + + echo random >expect && + test_cmp expect z/c + ) +' + +########################################################################### +# SECTION 11: Handling dirty (not up-to-date) files +# +# unpack_trees(), upon which the recursive merge algorithm is based, aborts +# the operation if untracked or dirty files would be deleted or overwritten +# by the merge. Unfortunately, unpack_trees() does not understand renames, +# and if it doesn't abort, then it muddies up the working directory before +# we even get to the point of detecting renames, so we need some special +# handling. This was true even of normal renames, but there are additional +# codepaths that need special handling with directory renames. Add +# testcases for both renamed-by-directory-rename-detection and standard +# rename cases. +########################################################################### + +# Testcase 11a, Avoid losing dirty contents with simple rename +# Commit O: z/{a,b_v1}, +# Commit A: z/{a,c_v1}, and z/c_v1 has uncommitted mods +# Commit B: z/{a,b_v2} +# Expected: ERROR_MSG(Refusing to lose dirty file at z/c) + +# z/a, staged version of z/c has sha1sum matching B:z/b_v2, +# z/c~HEAD with contents of B:z/b_v2, +# z/c with uncommitted mods on top of A:z/c_v1 + +test_expect_success '11a-setup: Avoid losing dirty contents with simple rename' ' + test_create_repo 11a && + ( + cd 11a && + + mkdir z && + echo a >z/a && + test_seq 1 10 >z/b && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/b z/c && + test_tick && + git commit -m "A" && + + git checkout B && + echo 11 >>z/b && + git add z/b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11a-check: Avoid losing dirty contents with simple rename' ' + ( + cd 11a && + + git checkout A^0 && + echo stuff >>z/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "Refusing to lose dirty file at z/c" out && + + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected z/c && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 4 out && + + git rev-parse >actual \ + :0:z/a :2:z/c && + git rev-parse >expect \ + O:z/a B:z/b && + test_cmp expect actual && + + git hash-object z/c~HEAD >actual && + git rev-parse B:z/b >expect && + test_cmp expect actual + ) +' + +# Testcase 11b, Avoid losing dirty file involved in directory rename +# Commit O: z/a, x/{b,c_v1} +# Commit A: z/{a,c_v1}, x/b, and z/c_v1 has uncommitted mods +# Commit B: y/a, x/{b,c_v2} +# Expected: y/{a,c_v2}, x/b, z/c_v1 with uncommitted mods untracked, +# ERROR_MSG(Refusing to lose dirty file at z/c) + + +test_expect_success '11b-setup: Avoid losing dirty file involved in directory rename' ' + test_create_repo 11b && + ( + cd 11b && + + mkdir z x && + echo a >z/a && + echo b >x/b && + test_seq 1 10 >x/c && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x/c z/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z y && + echo 11 >>x/c && + git add x/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11b-check: Avoid losing dirty file involved in directory rename' ' + ( + cd 11b && + + git checkout A^0 && + echo stuff >>z/c && + + git merge -s recursive B^0 >out 2>err && + test_i18ngrep "Refusing to lose dirty file at z/c" out && + + grep -q stuff z/c && + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected z/c && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -m >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 4 out && + + git rev-parse >actual \ + :0:x/b :0:y/a :0:y/c && + git rev-parse >expect \ + O:x/b O:z/a B:x/c && + test_cmp expect actual && + + git hash-object y/c >actual && + git rev-parse B:x/c >expect && + test_cmp expect actual + ) +' + +# Testcase 11c, Avoid losing not-up-to-date with rename + D/F conflict +# Commit O: y/a, x/{b,c_v1} +# Commit A: y/{a,c_v1}, x/b, and y/c_v1 has uncommitted mods +# Commit B: y/{a,c/d}, x/{b,c_v2} +# Expected: Abort_msg("following files would be overwritten by merge") + +# y/c left untouched (still has uncommitted mods) + +test_expect_success '11c-setup: Avoid losing not-uptodate with rename + D/F conflict' ' + test_create_repo 11c && + ( + cd 11c && + + mkdir y x && + echo a >y/a && + echo b >x/b && + test_seq 1 10 >x/c && + git add y x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x/c y/c && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y/c && + echo d >y/c/d && + echo 11 >>x/c && + git add x/c y/c/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11c-check: Avoid losing not-uptodate with rename + D/F conflict' ' + ( + cd 11c && + + git checkout A^0 && + echo stuff >>y/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "following files would be overwritten by merge" err && + + grep -q stuff y/c && + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected y/c && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -m >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 3 out + ) +' + +# Testcase 11d, Avoid losing not-up-to-date with rename + D/F conflict +# Commit O: z/a, x/{b,c_v1} +# Commit A: z/{a,c_v1}, x/b, and z/c_v1 has uncommitted mods +# Commit B: y/{a,c/d}, x/{b,c_v2} +# Expected: D/F: y/c_v2 vs y/c/d) + +# Warning_Msg("Refusing to lose dirty file at z/c) + +# y/{a,c~HEAD,c/d}, x/b, now-untracked z/c_v1 with uncommitted mods + +test_expect_success '11d-setup: Avoid losing not-uptodate with rename + D/F conflict' ' + test_create_repo 11d && + ( + cd 11d && + + mkdir z x && + echo a >z/a && + echo b >x/b && + test_seq 1 10 >x/c && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x/c z/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z y && + mkdir y/c && + echo d >y/c/d && + echo 11 >>x/c && + git add x/c y/c/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11d-check: Avoid losing not-uptodate with rename + D/F conflict' ' + ( + cd 11d && + + git checkout A^0 && + echo stuff >>z/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "Refusing to lose dirty file at z/c" out && + + grep -q stuff z/c && + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected z/c + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 5 out && + + git rev-parse >actual \ + :0:x/b :0:y/a :0:y/c/d :3:y/c && + git rev-parse >expect \ + O:x/b O:z/a B:y/c/d B:x/c && + test_cmp expect actual && + + git hash-object y/c~HEAD >actual && + git rev-parse B:x/c >expect && + test_cmp expect actual + ) +' + +# Testcase 11e, Avoid deleting not-up-to-date with dir rename/rename(1to2)/add +# Commit O: z/{a,b}, x/{c_1,d} +# Commit A: y/{a,b,c_2}, x/d, w/c_1, and y/c_2 has uncommitted mods +# Commit B: z/{a,b,c_1}, x/d +# Expected: Failed Merge; y/{a,b} + x/d + +# CONFLICT(rename/rename) x/c_1 -> w/c_1 vs y/c_1 + +# ERROR_MSG(Refusing to lose dirty file at y/c) +# y/c~B^0 has O:x/c_1 contents +# y/c~HEAD has A:y/c_2 contents +# y/c has dirty file from before merge + +test_expect_success '11e-setup: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' + test_create_repo 11e && + ( + cd 11e && + + mkdir z x && + echo a >z/a && + echo b >z/b && + echo c >x/c && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/ y/ && + echo different >y/c && + mkdir w && + git mv x/c w/ && + git add y/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/c z/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' + ( + cd 11e && + + git checkout A^0 && + echo mods >>y/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose dirty file at y/c" out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 4 out && + git ls-files -o >out && + test_line_count = 4 out && + + echo different >expected && + echo mods >>expected && + test_cmp expected y/c && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:x/d :1:x/c :2:w/c :2:y/c :3:y/c && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/c O:x/c A:y/c O:x/c && + test_cmp expect actual && + + git hash-object >actual \ + y/c~B^0 y/c~HEAD && + git rev-parse >expect \ + O:x/c A:y/c && + test_cmp expect actual + ) +' + +# Testcase 11f, Avoid deleting not-up-to-date w/ dir rename/rename(2to1) +# Commit O: z/{a,b}, x/{c_1,d_2} +# Commit A: y/{a,b,wham_1}, x/d_2, except y/wham has uncommitted mods +# Commit B: z/{a,b,wham_2}, x/c_1 +# Expected: Failed Merge; y/{a,b} + untracked y/{wham~B^0,wham~B^HEAD} + +# y/wham with dirty changes from before merge + +# CONFLICT(rename/rename) x/c vs x/d -> y/wham +# ERROR_MSG(Refusing to lose dirty file at y/wham) + +test_expect_success '11f-setup: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' + test_create_repo 11f && + ( + cd 11f && + + mkdir z x && + echo a >z/a && + echo b >z/b && + test_seq 1 10 >x/c && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/ y/ && + git mv x/c y/wham && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/wham && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' + ( + cd 11f && + + git checkout A^0 && + echo important >>y/wham && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose dirty file at y/wham" out && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 4 out && + + test_seq 1 10 >expected && + echo important >>expected && + test_cmp expected y/wham && + + test_must_fail git rev-parse :1:y/wham && + git hash-object >actual \ + y/wham~B^0 y/wham~HEAD && + git rev-parse >expect \ + O:x/d O:x/c && + test_cmp expect actual && + + git rev-parse >actual \ + :0:y/a :0:y/b :2:y/wham :3:y/wham && + git rev-parse >expect \ + O:z/a O:z/b O:x/c O:x/d && + test_cmp expect actual + ) +' + +########################################################################### +# SECTION 12: Everything else +# +# Tests suggested by others. Tests added after implementation completed +# and submitted. Grab bag. +########################################################################### + +# Testcase 12a, Moving one directory hierarchy into another +# (Related to testcase 9a) +# Commit O: node1/{leaf1,leaf2}, node2/{leaf3,leaf4} +# Commit A: node1/{leaf1,leaf2,node2/{leaf3,leaf4}} +# Commit B: node1/{leaf1,leaf2,leaf5}, node2/{leaf3,leaf4,leaf6} +# Expected: node1/{leaf1,leaf2,leaf5,node2/{leaf3,leaf4,leaf6}} + +test_expect_success '12a-setup: Moving one directory hierarchy into another' ' + test_create_repo 12a && + ( + cd 12a && + + mkdir -p node1 node2 && + echo leaf1 >node1/leaf1 && + echo leaf2 >node1/leaf2 && + echo leaf3 >node2/leaf3 && + echo leaf4 >node2/leaf4 && + git add node1 node2 && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv node2/ node1/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo leaf5 >node1/leaf5 && + echo leaf6 >node2/leaf6 && + git add node1 node2 && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '12a-check: Moving one directory hierarchy into another' ' + ( + cd 12a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + + git rev-parse >actual \ + HEAD:node1/leaf1 HEAD:node1/leaf2 HEAD:node1/leaf5 \ + HEAD:node1/node2/leaf3 \ + HEAD:node1/node2/leaf4 \ + HEAD:node1/node2/leaf6 && + git rev-parse >expect \ + O:node1/leaf1 O:node1/leaf2 B:node1/leaf5 \ + O:node2/leaf3 \ + O:node2/leaf4 \ + B:node2/leaf6 && + test_cmp expect actual + ) +' + +# Testcase 12b, Moving two directory hierarchies into each other +# (Related to testcases 1c and 12c) +# Commit O: node1/{leaf1, leaf2}, node2/{leaf3, leaf4} +# Commit A: node1/{leaf1, leaf2, node2/{leaf3, leaf4}} +# Commit B: node2/{leaf3, leaf4, node1/{leaf1, leaf2}} +# Expected: node1/node2/node1/{leaf1, leaf2}, +# node2/node1/node2/{leaf3, leaf4} +# NOTE: Without directory renames, we would expect +# node2/node1/{leaf1, leaf2}, +# node1/node2/{leaf3, leaf4} +# with directory rename detection, we note that +# commit A renames node2/ -> node1/node2/ +# commit B renames node1/ -> node2/node1/ +# therefore, applying those directory renames to the initial result +# (making all four paths experience a transitive renaming), yields +# the expected result. +# +# You may ask, is it weird to have two directories rename each other? +# To which, I can do no more than shrug my shoulders and say that +# even simple rules give weird results when given weird inputs. + +test_expect_success '12b-setup: Moving one directory hierarchy into another' ' + test_create_repo 12b && + ( + cd 12b && + + mkdir -p node1 node2 && + echo leaf1 >node1/leaf1 && + echo leaf2 >node1/leaf2 && + echo leaf3 >node2/leaf3 && + echo leaf4 >node2/leaf4 && + git add node1 node2 && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv node2/ node1/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv node1/ node2/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '12b-check: Moving one directory hierarchy into another' ' + ( + cd 12b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:node1/node2/node1/leaf1 \ + HEAD:node1/node2/node1/leaf2 \ + HEAD:node2/node1/node2/leaf3 \ + HEAD:node2/node1/node2/leaf4 && + git rev-parse >expect \ + O:node1/leaf1 \ + O:node1/leaf2 \ + O:node2/leaf3 \ + O:node2/leaf4 && + test_cmp expect actual + ) +' + +# Testcase 12c, Moving two directory hierarchies into each other w/ content merge +# (Related to testcase 12b) +# Commit O: node1/{ leaf1_1, leaf2_1}, node2/{leaf3_1, leaf4_1} +# Commit A: node1/{ leaf1_2, leaf2_2, node2/{leaf3_2, leaf4_2}} +# Commit B: node2/{node1/{leaf1_3, leaf2_3}, leaf3_3, leaf4_3} +# Expected: Content merge conflicts for each of: +# node1/node2/node1/{leaf1, leaf2}, +# node2/node1/node2/{leaf3, leaf4} +# NOTE: This is *exactly* like 12c, except that every path is modified on +# each side of the merge. + +test_expect_success '12c-setup: Moving one directory hierarchy into another w/ content merge' ' + test_create_repo 12c && + ( + cd 12c && + + mkdir -p node1 node2 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf1\n" >node1/leaf1 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf2\n" >node1/leaf2 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf3\n" >node2/leaf3 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf4\n" >node2/leaf4 && + git add node1 node2 && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv node2/ node1/ && + for i in `git ls-files`; do echo side A >>$i; done && + git add -u && + test_tick && + git commit -m "A" && + + git checkout B && + git mv node1/ node2/ && + for i in `git ls-files`; do echo side B >>$i; done && + git add -u && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '12c-check: Moving one directory hierarchy into another w/ content merge' ' + ( + cd 12c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 && + + git ls-files -u >out && + test_line_count = 12 out && + + git rev-parse >actual \ + :1:node1/node2/node1/leaf1 \ + :1:node1/node2/node1/leaf2 \ + :1:node2/node1/node2/leaf3 \ + :1:node2/node1/node2/leaf4 \ + :2:node1/node2/node1/leaf1 \ + :2:node1/node2/node1/leaf2 \ + :2:node2/node1/node2/leaf3 \ + :2:node2/node1/node2/leaf4 \ + :3:node1/node2/node1/leaf1 \ + :3:node1/node2/node1/leaf2 \ + :3:node2/node1/node2/leaf3 \ + :3:node2/node1/node2/leaf4 && + git rev-parse >expect \ + O:node1/leaf1 \ + O:node1/leaf2 \ + O:node2/leaf3 \ + O:node2/leaf4 \ + A:node1/leaf1 \ + A:node1/leaf2 \ + A:node1/node2/leaf3 \ + A:node1/node2/leaf4 \ + B:node2/node1/leaf1 \ + B:node2/node1/leaf2 \ + B:node2/leaf3 \ + B:node2/leaf4 && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t6046-merge-skip-unneeded-updates.sh b/t/t6046-merge-skip-unneeded-updates.sh new file mode 100755 index 0000000000..38e24f787c --- /dev/null +++ b/t/t6046-merge-skip-unneeded-updates.sh @@ -0,0 +1,763 @@ +#!/bin/sh + +test_description="merge cases" + +# The setup for all of them, pictorially, is: +# +# A +# o +# / \ +# O o ? +# \ / +# o +# B +# +# To help make it easier to follow the flow of tests, they have been +# divided into sections and each test will start with a quick explanation +# of what commits O, A, and B contain. +# +# Notation: +# z/{b,c} means files z/b and z/c both exist +# x/d_1 means file x/d exists with content d1. (Purpose of the +# underscore notation is to differentiate different +# files that might be renamed into each other's paths.) + +. ./test-lib.sh + + +########################################################################### +# SECTION 1: Cases involving no renames (one side has subset of changes of +# the other side) +########################################################################### + +# Testcase 1a, Changes on A, subset of changes on B +# Commit O: b_1 +# Commit A: b_2 +# Commit B: b_3 +# Expected: b_2 + +test_expect_success '1a-setup: Modify(A)/Modify(B), change on B subset of A' ' + test_create_repo 1a && + ( + cd 1a && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1a-check-L: Modify(A)/Modify(B), change on B subset of A' ' + test_when_finished "git -C 1a reset --hard" && + test_when_finished "git -C 1a clean -fd" && + ( + cd 1a && + + git checkout A^0 && + + test-tool chmtime =31337 b && + test-tool chmtime -v +0 b >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped b" out && + test_must_be_empty err && + + test-tool chmtime -v +0 b >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:b && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object b >actual && + git rev-parse A:b >expect && + test_cmp expect actual + ) +' + +test_expect_success '1a-check-R: Modify(A)/Modify(B), change on B subset of A' ' + test_when_finished "git -C 1a reset --hard" && + test_when_finished "git -C 1a clean -fd" && + ( + cd 1a && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep "Auto-merging b" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:b && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object b >actual && + git rev-parse A:b >expect && + test_cmp expect actual + ) +' + + +########################################################################### +# SECTION 2: Cases involving basic renames +########################################################################### + +# Testcase 2a, Changes on A, rename on B +# Commit O: b_1 +# Commit A: b_2 +# Commit B: c_1 +# Expected: c_2 + +test_expect_success '2a-setup: Modify(A)/rename(B)' ' + test_create_repo 2a && + ( + cd 2a && + + test_seq 1 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_seq 1 11 >b && + git add b && + test_tick && + git commit -m "A" && + + git checkout B && + git mv b c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2a-check-L: Modify/rename, merge into modify side' ' + test_when_finished "git -C 2a reset --hard" && + test_when_finished "git -C 2a clean -fd" && + ( + cd 2a && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep ! "Skipped c" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:b >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +test_expect_success '2a-check-R: Modify/rename, merge into rename side' ' + test_when_finished "git -C 2a reset --hard" && + test_when_finished "git -C 2a clean -fd" && + ( + cd 2a && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep ! "Skipped c" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:b >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +# Testcase 2b, Changed and renamed on A, subset of changes on B +# Commit O: b_1 +# Commit A: c_2 +# Commit B: b_3 +# Expected: c_2 + +test_expect_success '2b-setup: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_create_repo 2b && + ( + cd 2b && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + git mv b c && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2b-check-L: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_when_finished "git -C 2b reset --hard" && + test_when_finished "git -C 2b clean -fd" && + ( + cd 2b && + + git checkout A^0 && + + test-tool chmtime =31337 c && + test-tool chmtime -v +0 c >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped c" out && + test_must_be_empty err && + + test-tool chmtime -v +0 c >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:c && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:c >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +test_expect_success '2b-check-R: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_when_finished "git -C 2b reset --hard" && + test_when_finished "git -C 2b clean -fd" && + ( + cd 2b && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep "Auto-merging c" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:c && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:c >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +# Testcase 2c, Changes on A, rename on B +# Commit O: b_1 +# Commit A: b_2, c_3 +# Commit B: c_1 +# Expected: rename/add conflict c_2 vs c_3 +# +# NOTE: Since A modified b_1->b_2, and B renamed b_1->c_1, the threeway +# merge of those files should result in c_2. We then should have a +# rename/add conflict between c_2 and c_3. However, if we note in +# merge_content() that A had the right contents (b_2 has same +# contents as c_2, just at a different name), and that A had the +# right path present (c_3 existed) and thus decides that it can +# skip the update, then we're in trouble. This test verifies we do +# not make that particular mistake. + +test_expect_success '2c-setup: Modify b & add c VS rename b->c' ' + test_create_repo 2c && + ( + cd 2c && + + test_seq 1 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_seq 1 11 >b && + echo whatever >c && + git add b c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv b c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2c-check: Modify b & add c VS rename b->c' ' + ( + cd 2c && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 && + export GIT_MERGE_VERBOSITY && + test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "CONFLICT (rename/add): Rename b->c" out && + test_i18ngrep ! "Skipped c" out && + test_must_be_empty err + + # FIXME: rename/add conflicts are horribly broken right now; + # when I get back to my patch series fixing it and + # rename/rename(2to1) conflicts to bring them in line with + # how add/add conflicts behave, then checks like the below + # could be added. But that patch series is waiting until + # the rename-directory-detection series lands, which this + # is part of. And in the mean time, I do not want to further + # enforce broken behavior. So for now, the main test is the + # one above that err is an empty file. + + #git ls-files -s >index_files && + #test_line_count = 2 index_files && + + #git rev-parse >actual :2:c :3:c && + #git rev-parse >expect A:b A:c && + #test_cmp expect actual && + + #git cat-file -p A:b >>merged && + #git cat-file -p A:c >>merge-me && + #>empty && + #test_must_fail git merge-file \ + # -L "Temporary merge branch 1" \ + # -L "" \ + # -L "Temporary merge branch 2" \ + # merged empty merge-me && + #sed -e "s/^\([<=>]\)/\1\1\1/" merged >merged-internal && + + #git hash-object c >actual && + #git hash-object merged-internal >expect && + #test_cmp expect actual && + + #test_path_is_missing b + ) +' + + +########################################################################### +# SECTION 3: Cases involving directory renames +# +# NOTE: +# Directory renames only apply when one side renames a directory, and the +# other side adds or renames a path into that directory. Applying the +# directory rename to that new path creates a new pathname that didn't +# exist on either side of history. Thus, it is impossible for the +# merge contents to already be at the right path, so all of these checks +# exist just to make sure that updates are not skipped. +########################################################################### + +# Testcase 3a, Change + rename into dir foo on A, dir rename foo->bar on B +# Commit O: bq_1, foo/whatever +# Commit A: foo/{bq_2, whatever} +# Commit B: bq_1, bar/whatever +# Expected: bar/{bq_2, whatever} + +test_expect_success '3a-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_create_repo 3a && + ( + cd 3a && + + mkdir foo && + test_seq 1 10 >bq && + test_write_lines a b c d e f g h i j k >foo/whatever && + git add bq foo/whatever && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_seq 1 11 >bq && + git add bq && + git mv bq foo/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv foo/ bar/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3a-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3a reset --hard" && + test_when_finished "git -C 3a clean -fd" && + ( + cd 3a && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect A:foo/bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse A:foo/bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +test_expect_success '3a-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3a reset --hard" && + test_when_finished "git -C 3a clean -fd" && + ( + cd 3a && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect A:foo/bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse A:foo/bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +# Testcase 3b, rename into dir foo on A, dir rename foo->bar + change on B +# Commit O: bq_1, foo/whatever +# Commit A: foo/{bq_1, whatever} +# Commit B: bq_2, bar/whatever +# Expected: bar/{bq_2, whatever} + +test_expect_success '3b-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_create_repo 3b && + ( + cd 3b && + + mkdir foo && + test_seq 1 10 >bq && + test_write_lines a b c d e f g h i j k >foo/whatever && + git add bq foo/whatever && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv bq foo/ && + test_tick && + git commit -m "A" && + + git checkout B && + test_seq 1 11 >bq && + git add bq && + git mv foo/ bar/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3b-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3b reset --hard" && + test_when_finished "git -C 3b clean -fd" && + ( + cd 3b && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect B:bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse B:bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +test_expect_success '3b-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3b reset --hard" && + test_when_finished "git -C 3b clean -fd" && + ( + cd 3b && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect B:bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse B:bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +########################################################################### +# SECTION 4: Cases involving dirty changes +########################################################################### + +# Testcase 4a, Changed on A, subset of changes on B, locally modified +# Commit O: b_1 +# Commit A: b_2 +# Commit B: b_3 +# Working copy: b_4 +# Expected: b_2 for merge, b_4 in working copy + +test_expect_success '4a-setup: Change on A, change on B subset of A, dirty mods present' ' + test_create_repo 4a && + ( + cd 4a && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +# NOTE: For as long as we continue using unpack_trees() without index_only +# set to true, it will error out on a case like this claiming the the locally +# modified file would be overwritten by the merge. Getting this testcase +# correct requires doing the merge in-memory first, then realizing that no +# updates to the file are necessary, and thus that we can just leave the path +# alone. +test_expect_failure '4a-check: Change on A, change on B subset of A, dirty mods present' ' + test_when_finished "git -C 4a reset --hard" && + test_when_finished "git -C 4a clean -fd" && + ( + cd 4a && + + git checkout A^0 && + echo "File rewritten" >b && + + test-tool chmtime =31337 b && + test-tool chmtime -v +0 b >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped b" out && + test_must_be_empty err && + + test-tool chmtime -v +0 b >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual :0:b && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object b >actual && + echo "File rewritten" | git hash-object --stdin >expect && + test_cmp expect actual + ) +' + +# Testcase 4b, Changed+renamed on A, subset of changes on B, locally modified +# Commit O: b_1 +# Commit A: c_2 +# Commit B: b_3 +# Working copy: c_4 +# Expected: c_2 + +test_expect_success '4b-setup: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' + test_create_repo 4b && + ( + cd 4b && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + git mv b c && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '4b-check: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' + test_when_finished "git -C 4b reset --hard" && + test_when_finished "git -C 4b clean -fd" && + ( + cd 4b && + + git checkout A^0 && + echo "File rewritten" >c && + + test-tool chmtime =31337 c && + test-tool chmtime -v +0 c >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped c" out && + test_must_be_empty err && + + test-tool chmtime -v +0 c >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual :0:c && + git rev-parse >expect A:c && + test_cmp expect actual && + + git hash-object c >actual && + echo "File rewritten" | git hash-object --stdin >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +test_done diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index c630aba657..aa3e249639 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -4,8 +4,6 @@ # test_description='Tests replace refs functionality' -exec </dev/null - . ./test-lib.sh . "$TEST_DIRECTORY/lib-gpg.sh" @@ -444,4 +442,32 @@ test_expect_success GPG '--graft on a commit with a mergetag' ' git replace -d $HASH10 ' +test_expect_success '--convert-graft-file' ' + git checkout -b with-graft-file && + test_commit root2 && + git reset --hard root2^ && + test_commit root1 && + test_commit after-root1 && + test_tick && + git merge -m merge-root2 root2 && + + : add and convert graft file && + printf "%s\n%s %s\n\n# comment\n%s\n" \ + $(git rev-parse HEAD^^ HEAD^ HEAD^^ HEAD^2) \ + >.git/info/grafts && + git replace --convert-graft-file && + test_path_is_missing .git/info/grafts && + + : verify that the history is now "grafted" && + git rev-list HEAD >out && + test_line_count = 4 out && + + : create invalid graft file and verify that it is not deleted && + test_when_finished "rm -f .git/info/grafts" && + echo $EMPTY_BLOB $EMPTY_TREE >.git/info/grafts && + test_must_fail git replace --convert-graft-file 2>err && + test_i18ngrep "$EMPTY_BLOB $EMPTY_TREE" err && + test_i18ngrep "$EMPTY_BLOB $EMPTY_TREE" .git/info/grafts +' + test_done diff --git a/t/t6101-rev-parse-parents.sh b/t/t6101-rev-parse-parents.sh index 8c617981a3..7683e4a114 100755 --- a/t/t6101-rev-parse-parents.sh +++ b/t/t6101-rev-parse-parents.sh @@ -214,4 +214,12 @@ test_expect_success 'rev-list merge^-1x (garbage after ^-1)' ' test_must_fail git rev-list merge^-1x ' +test_expect_success 'rev-parse $garbage^@ does not segfault' ' + test_must_fail git rev-parse $EMPTY_TREE^@ +' + +test_expect_success 'rev-parse $garbage...$garbage does not segfault' ' + test_must_fail git rev-parse $EMPTY_TREE...$EMPTY_BLOB +' + test_done diff --git a/t/t6111-rev-list-treesame.sh b/t/t6111-rev-list-treesame.sh index 32474c23d3..4244638285 100755 --- a/t/t6111-rev-list-treesame.sh +++ b/t/t6111-rev-list-treesame.sh @@ -20,7 +20,7 @@ note () { } unnote () { - git name-rev --tags --stdin | sed -e "s|$_x40 (tags/\([^)]*\))\([ ]\)|\1\2|g" + git name-rev --tags --stdin | sed -e "s|$OID_REGEX (tags/\([^)]*\))\([ ]\)|\1\2|g" } test_expect_success setup ' diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index a5d9015024..84dd1cb690 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -378,4 +378,12 @@ check_describe tags/A --all A check_describe tags/c --all c check_describe heads/branch_A --all --match='branch_*' branch_A +test_expect_success 'describe complains about tree object' ' + test_must_fail git describe HEAD^{tree} +' + +test_expect_success 'describe complains about missing object' ' + test_must_fail git describe $ZERO_OID +' + test_done diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 2e2fb0e957..a54a52aaa4 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -512,7 +512,7 @@ test_expect_success 'merge-msg with "merging" an annotated tag' ' test_when_finished "git reset --hard" && annote=$(git rev-parse annote) && - git merge --no-commit $annote && + git merge --no-commit --no-ff $annote && { cat <<-EOF Merge tag '\''$annote'\'' diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index c128dfc579..e0496da812 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -310,7 +310,7 @@ test_expect_success 'exercise strftime with odd fields' ' echo >expected && git for-each-ref --format="%(authordate:format:)" refs/heads >actual && test_cmp expected actual && - long="long format -- $_z40$_z40$_z40$_z40$_z40$_z40$_z40" && + long="long format -- $ZERO_OID$ZERO_OID$ZERO_OID$ZERO_OID$ZERO_OID$ZERO_OID$ZERO_OID" && echo $long >expected && git for-each-ref --format="%(authordate:format:$long)" refs/heads >actual && test_cmp expected actual @@ -373,11 +373,8 @@ test_expect_success 'Quoting style: tcl' ' for i in "--perl --shell" "-s --python" "--python --tcl" "--tcl --perl"; do test_expect_success "more than one quoting style: $i" " - git for-each-ref $i 2>&1 | (read line && - case \$line in - \"error: more than one quoting style\"*) : happy;; - *) false - esac) + test_must_fail git for-each-ref $i 2>err && + grep '^error: more than one quoting style' err " done @@ -798,4 +795,15 @@ test_expect_success ':remotename and :remoteref' ' ) ' +test_expect_success 'for-each-ref --ignore-case ignores case' ' + >expect && + git for-each-ref --format="%(refname)" refs/heads/MASTER >actual && + test_cmp expect actual && + + echo refs/heads/master >expect && + git for-each-ref --format="%(refname)" --ignore-case \ + refs/heads/MASTER >actual && + test_cmp expect actual +' + test_done diff --git a/t/t6301-for-each-ref-errors.sh b/t/t6301-for-each-ref-errors.sh index c734ce2388..49cc65bb58 100755 --- a/t/t6301-for-each-ref-errors.sh +++ b/t/t6301-for-each-ref-errors.sh @@ -4,7 +4,7 @@ test_description='for-each-ref errors for broken refs' . ./test-lib.sh -ZEROS=$_z40 +ZEROS=$ZERO_OID MISSING=abababababababababababababababababababab test_expect_success setup ' diff --git a/t/t6500-gc.sh b/t/t6500-gc.sh index 41b0be575d..818435f04e 100755 --- a/t/t6500-gc.sh +++ b/t/t6500-gc.sh @@ -5,6 +5,13 @@ test_description='basic git gc tests . ./test-lib.sh +test_expect_success 'setup' ' + # do not let the amount of physical memory affects gc + # behavior, make sure we always pack everything to one pack by + # default + git config gc.bigPackThreshold 2g +' + test_expect_success 'gc empty repository' ' git gc ' @@ -43,6 +50,31 @@ test_expect_success 'gc is not aborted due to a stale symref' ' ) ' +test_expect_success 'gc --keep-largest-pack' ' + test_create_repo keep-pack && + ( + cd keep-pack && + test_commit one && + test_commit two && + test_commit three && + git gc && + ( cd .git/objects/pack && ls *.pack ) >pack-list && + test_line_count = 1 pack-list && + BASE_PACK=.git/objects/pack/pack-*.pack && + test_commit four && + git repack -d && + test_commit five && + git repack -d && + ( cd .git/objects/pack && ls *.pack ) >pack-list && + test_line_count = 3 pack-list && + git gc --keep-largest-pack && + ( cd .git/objects/pack && ls *.pack ) >pack-list && + test_line_count = 2 pack-list && + test_path_is_file $BASE_PACK && + git fsck + ) +' + test_expect_success 'auto gc with too many loose objects does not attempt to create bitmaps' ' test_config gc.auto 3 && test_config gc.autodetach false && @@ -87,7 +119,7 @@ test_expect_success 'background auto gc does not run if gc.log is present and re test_must_fail git gc --auto 2>err && test_i18ngrep "^error:" err && test_config gc.logexpiry 5.days && - test-chmtime =-345600 .git/gc.log && + test-tool chmtime =-345600 .git/gc.log && test_must_fail git gc --auto && test_config gc.logexpiry 2.days && run_and_wait_for_auto_gc && diff --git a/t/t6501-freshen-objects.sh b/t/t6501-freshen-objects.sh index 394b169ead..033871ee5f 100755 --- a/t/t6501-freshen-objects.sh +++ b/t/t6501-freshen-objects.sh @@ -72,8 +72,7 @@ for repack in '' true; do ' test_expect_success "simulate time passing ($title)" ' - find .git/objects -type f | - xargs test-chmtime -v -86400 + test-tool chmtime --get -86400 $(find .git/objects -type f) ' test_expect_success "start writing new commit with old blob ($title)" ' @@ -103,8 +102,7 @@ for repack in '' true; do test_expect_success "abandon objects again ($title)" ' git reset --hard HEAD^ && - find .git/objects -type f | - xargs test-chmtime -v -86400 + test-tool chmtime --get -86400 $(find .git/objects -type f) ' test_expect_success "start writing new commit with same tree ($title)" ' diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index d4e6485a26..cc3fd2baf2 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -21,8 +21,8 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path0/COPYING..*path1/COPYING"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path0/COPYING..*path1/COPYING" actual' test_expect_success \ 'moving the file back into subdirectory' \ @@ -35,8 +35,8 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path1/COPYING..*path0/COPYING"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path1/COPYING..*path0/COPYING" actual' test_expect_success \ 'mv --dry-run does not move file' \ @@ -122,10 +122,9 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path0/COPYING..*path2/COPYING" && - git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path0/README..*path2/README"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path0/COPYING..*path2/COPYING" actual && + grep "^R100..*path0/README..*path2/README" actual' test_expect_success \ 'succeed when source is a prefix of destination' \ @@ -141,10 +140,9 @@ test_expect_success \ test_expect_success \ 'checking the commit' \ - 'git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path2/COPYING..*path1/path2/COPYING" && - git diff-tree -r -M --name-status HEAD^ HEAD | \ - grep "^R100..*path2/README..*path1/path2/README"' + 'git diff-tree -r -M --name-status HEAD^ HEAD >actual && + grep "^R100..*path2/COPYING..*path1/path2/COPYING" actual && + grep "^R100..*path2/README..*path1/path2/README" actual' test_expect_success \ 'do not move directory over existing directory' \ @@ -497,7 +495,7 @@ test_expect_success 'moving a submodule in nested directories' ' test_cmp expect actual ' -test_expect_failure 'moving nested submodules' ' +test_expect_success 'moving nested submodules' ' git commit -am "cleanup commit" && mkdir sub_nested_nested && (cd sub_nested_nested && diff --git a/t/t7003-filter-branch.sh b/t/t7003-filter-branch.sh index 7cb60799be..e23de7d0b5 100755 --- a/t/t7003-filter-branch.sh +++ b/t/t7003-filter-branch.sh @@ -107,6 +107,21 @@ test_expect_success 'test that the directory was renamed' ' test dir/D = "$(cat diroh/D.t)" ' +V=$(git rev-parse HEAD) + +test_expect_success 'populate --state-branch' ' + git filter-branch --state-branch state -f --tree-filter "touch file || :" HEAD +' + +W=$(git rev-parse HEAD) + +test_expect_success 'using --state-branch to skip already rewritten commits' ' + test_when_finished git reset --hard $V && + git reset --hard $V && + git filter-branch --state-branch state -f --tree-filter "touch file || :" HEAD && + test_cmp_rev $W HEAD +' + git tag oldD HEAD~4 test_expect_success 'rewrite one branch, keeping a side branch' ' git branch modD oldD && @@ -187,7 +202,8 @@ test_expect_success 'author information is preserved' ' test \$GIT_COMMIT != $(git rev-parse master) || \ echo Hallo" \ preserved-author) && - test 1 = $(git rev-list --author="B V Uips" preserved-author | wc -l) + git rev-list --author="B V Uips" preserved-author >actual && + test_line_count = 1 actual ' test_expect_success "remove a certain author's commits" ' @@ -205,7 +221,8 @@ test_expect_success "remove a certain author's commits" ' cnt1=$(git rev-list master | wc -l) && cnt2=$(git rev-list removed-author | wc -l) && test $cnt1 -eq $(($cnt2 + 1)) && - test 0 = $(git rev-list --author="B V Uips" removed-author | wc -l) + git rev-list --author="B V Uips" removed-author >actual && + test_line_count = 0 actual ' test_expect_success 'barf on invalid name' ' @@ -258,7 +275,8 @@ test_expect_success 'Subdirectory filter with disappearing trees' ' git commit -m "Re-adding foo" && git filter-branch -f --subdirectory-filter foo && - test $(git rev-list master | wc -l) = 3 + git rev-list master >actual && + test_line_count = 3 actual ' test_expect_success 'Tag name filtering retains tag message' ' @@ -470,4 +488,18 @@ test_expect_success 'tree-filter deals with object name vs pathname ambiguity' ' git show HEAD:$ambiguous ' +test_expect_success 'rewrite repository including refs that point at non-commit object' ' + test_when_finished "git reset --hard original" && + tree=$(git rev-parse HEAD^{tree}) && + test_when_finished "git replace -d $tree" && + echo A >new && + git add new && + new_tree=$(git write-tree) && + git replace $tree $new_tree && + git tag -a -m "tag to a tree" treetag $new_tree && + git reset --hard HEAD && + git filter-branch -f -- --all >filter-output 2>&1 && + ! fgrep fatal filter-output +' + test_done diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index a9af2de996..d7b319e919 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -363,7 +363,7 @@ test_expect_success 'tag -l <pattern> -l <pattern> works, as our buggy documenta ' test_expect_success 'listing tags in column' ' - COLUMNS=40 git tag -l --column=row >actual && + COLUMNS=41 git tag -l --column=row >actual && cat >expected <<\EOF && a1 aa1 cba t210 t211 v0.2.1 v1.0 v1.0.1 v1.1.3 @@ -452,6 +452,21 @@ test_expect_success \ test_cmp expect actual ' +get_tag_header annotated-tag-edit $commit commit $time >expect +echo "An edited message" >>expect +test_expect_success 'set up editor' ' + write_script fakeeditor <<-\EOF + sed -e "s/A message/An edited message/g" <"$1" >"$1-" + mv "$1-" "$1" + EOF +' +test_expect_success \ + 'creating an annotated tag with -m message --edit should succeed' ' + GIT_EDITOR=./fakeeditor git tag -m "A message" --edit annotated-tag-edit && + get_tag_msg annotated-tag-edit >actual && + test_cmp expect actual +' + cat >msgfile <<EOF Another message in a file. @@ -465,6 +480,21 @@ test_expect_success \ test_cmp expect actual ' +get_tag_header file-annotated-tag-edit $commit commit $time >expect +sed -e "s/Another message/Another edited message/g" msgfile >>expect +test_expect_success 'set up editor' ' + write_script fakeeditor <<-\EOF + sed -e "s/Another message/Another edited message/g" <"$1" >"$1-" + mv "$1-" "$1" + EOF +' +test_expect_success \ + 'creating an annotated tag with -F messagefile --edit should succeed' ' + GIT_EDITOR=./fakeeditor git tag -F msgfile --edit file-annotated-tag-edit && + get_tag_msg file-annotated-tag-edit >actual && + test_cmp expect actual +' + cat >inputmsg <<EOF A message from the standard input @@ -1026,7 +1056,18 @@ test_expect_success GPG \ git tag -s -F sigblanknonlfile blanknonlfile-signed-tag && get_tag_msg blanknonlfile-signed-tag >actual && test_cmp expect actual && - git tag -v signed-tag + git tag -v blanknonlfile-signed-tag +' + +test_expect_success GPG 'signed tag with embedded PGP message' ' + cat >msg <<-\EOF && + -----BEGIN PGP MESSAGE----- + + this is not a real PGP message + -----END PGP MESSAGE----- + EOF + git tag -s -F msg confusing-pgp-message && + git tag -v confusing-pgp-message ' # messages with commented lines for signed tags: diff --git a/t/t7005-editor.sh b/t/t7005-editor.sh index 29e5043b94..b2ca77b338 100755 --- a/t/t7005-editor.sh +++ b/t/t7005-editor.sh @@ -111,14 +111,8 @@ do ' done -if echo 'echo space > "$1"' > "e space.sh" -then - # FS supports spaces in filenames - test_set_prereq SPACES_IN_FILENAMES -fi - -test_expect_success SPACES_IN_FILENAMES 'editor with a space' ' - +test_expect_success 'editor with a space' ' + echo "echo space >\$1" >"e space.sh" && chmod a+x "e space.sh" && GIT_EDITOR="./e\ space.sh" git commit --amend && test space = "$(git show -s --pretty=format:%s)" @@ -126,7 +120,7 @@ test_expect_success SPACES_IN_FILENAMES 'editor with a space' ' ' unset GIT_EDITOR -test_expect_success SPACES_IN_FILENAMES 'core.editor with a space' ' +test_expect_success 'core.editor with a space' ' git config core.editor \"./e\ space.sh\" && git commit --amend && diff --git a/t/t7006-pager.sh b/t/t7006-pager.sh index f5f46a95b4..7541ba5edb 100755 --- a/t/t7006-pager.sh +++ b/t/t7006-pager.sh @@ -110,13 +110,6 @@ test_expect_success TTY 'configuration can disable pager' ' ! test -e paginated.out ' -test_expect_success TTY 'git config uses a pager if configured to' ' - rm -f paginated.out && - test_config pager.config true && - test_terminal git config --list && - test -e paginated.out -' - test_expect_success TTY 'configuration can enable pager (from subdir)' ' rm -f paginated.out && mkdir -p subdir && @@ -252,6 +245,48 @@ test_expect_success TTY 'git branch --set-upstream-to ignores pager.branch' ' ! test -e paginated.out ' +test_expect_success TTY 'git config ignores pager.config when setting' ' + rm -f paginated.out && + test_terminal git -c pager.config config foo.bar bar && + ! test -e paginated.out +' + +test_expect_success TTY 'git config --edit ignores pager.config' ' + rm -f paginated.out editor.used && + write_script editor <<-\EOF && + touch editor.used + EOF + EDITOR=./editor test_terminal git -c pager.config config --edit && + ! test -e paginated.out && + test -e editor.used +' + +test_expect_success TTY 'git config --get ignores pager.config' ' + rm -f paginated.out && + test_terminal git -c pager.config config --get foo.bar && + ! test -e paginated.out +' + +test_expect_success TTY 'git config --get-urlmatch defaults to paging' ' + rm -f paginated.out && + test_terminal git -c http."https://foo.com/".bar=foo \ + config --get-urlmatch http https://foo.com && + test -e paginated.out +' + +test_expect_success TTY 'git config --get-all respects pager.config' ' + rm -f paginated.out && + test_terminal git -c pager.config=false config --get-all foo.bar && + ! test -e paginated.out +' + +test_expect_success TTY 'git config --list defaults to paging' ' + rm -f paginated.out && + test_terminal git config --list && + test -e paginated.out +' + + # A colored commit log will begin with an appropriate ANSI escape # for the first color; the text "commit" comes later. colorful() { diff --git a/t/t7009-filter-branch-null-sha1.sh b/t/t7009-filter-branch-null-sha1.sh index a8d9ec4987..9ba9f24ad2 100755 --- a/t/t7009-filter-branch-null-sha1.sh +++ b/t/t7009-filter-branch-null-sha1.sh @@ -12,7 +12,7 @@ test_expect_success 'setup: base commits' ' test_expect_success 'setup: a commit with a bogus null sha1 in the tree' ' { git ls-tree HEAD && - printf "160000 commit $_z40\\tbroken\\n" + printf "160000 commit $ZERO_OID\\tbroken\\n" } >broken-tree && echo "add broken entry" >msg && diff --git a/t/t7011-skip-worktree-reading.sh b/t/t7011-skip-worktree-reading.sh index 84f41451ec..37525cae3a 100755 --- a/t/t7011-skip-worktree-reading.sh +++ b/t/t7011-skip-worktree-reading.sh @@ -118,7 +118,7 @@ test_expect_success 'grep with skip-worktree file' ' test "$(git grep --no-ext-grep test)" = "1:test" ' -echo ":000000 100644 $_z40 $EMPTY_BLOB A 1" > expected +echo ":000000 100644 $ZERO_OID $EMPTY_BLOB A 1" > expected test_expect_success 'diff-index does not examine skip-worktree absent entries' ' setup_absent && git diff-index HEAD -- 1 > result && diff --git a/t/t7030-verify-tag.sh b/t/t7030-verify-tag.sh index b4b49eeb08..291a1e2b07 100755 --- a/t/t7030-verify-tag.sh +++ b/t/t7030-verify-tag.sh @@ -74,7 +74,7 @@ test_expect_success GPG 'verify and show signatures' ' test_expect_success GPG 'detect fudged signature' ' git cat-file tag seventh-signed >raw && - sed -e "s/seventh/7th forged/" raw >forged1 && + sed -e "/^tag / s/seventh/7th forged/" raw >forged1 && git hash-object -w -t tag forged1 >forged1.tag && test_must_fail git verify-tag $(cat forged1.tag) 2>actual1 && grep "BAD signature from" actual1 && diff --git a/t/t7063-status-untracked-cache.sh b/t/t7063-status-untracked-cache.sh index e5fb892f95..c61e304e97 100755 --- a/t/t7063-status-untracked-cache.sh +++ b/t/t7063-status-untracked-cache.sh @@ -14,6 +14,9 @@ test_description='test untracked cache' # See <20160803174522.5571-1-pclouds@gmail.com> if you want to know # more. +GIT_FORCE_UNTRACKED_CACHE=true +export GIT_FORCE_UNTRACKED_CACHE + sync_mtime () { find . -type d -ls >/dev/null } @@ -22,6 +25,12 @@ avoid_racy() { sleep 1 } +status_is_clean() { + >../status.expect && + git status --porcelain >../status.actual && + test_cmp ../status.expect ../status.actual +} + test_lazy_prereq UNTRACKED_CACHE ' { git update-index --test-untracked-cache; ret=$?; } && test $ret -ne 1 @@ -683,4 +692,85 @@ test_expect_success 'untracked cache survives a commit' ' test_cmp ../before ../after ' +test_expect_success 'teardown worktree' ' + cd .. +' + +test_expect_success SYMLINKS 'setup worktree for symlink test' ' + git init worktree-symlink && + cd worktree-symlink && + git config core.untrackedCache true && + mkdir one two && + touch one/file two/file && + git add one/file two/file && + git commit -m"first commit" && + git rm -rf one && + ln -s two one && + git add one && + git commit -m"second commit" +' + +test_expect_success SYMLINKS '"status" after symlink replacement should be clean with UC=true' ' + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + status_is_clean +' + +test_expect_success SYMLINKS '"status" after symlink replacement should be clean with UC=false' ' + git config core.untrackedCache false && + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + status_is_clean +' + +test_expect_success 'setup worktree for non-symlink test' ' + git init worktree-non-symlink && + cd worktree-non-symlink && + git config core.untrackedCache true && + mkdir one two && + touch one/file two/file && + git add one/file two/file && + git commit -m"first commit" && + git rm -rf one && + cp two/file one && + git add one && + git commit -m"second commit" +' + +test_expect_success '"status" after file replacement should be clean with UC=true' ' + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + test-dump-untracked-cache >../actual && + grep -F "recurse valid" ../actual >../actual.grep && + cat >../expect.grep <<EOF && +/ 0000000000000000000000000000000000000000 recurse valid +/two/ 0000000000000000000000000000000000000000 recurse valid +EOF + status_is_clean && + test_cmp ../expect.grep ../actual.grep +' + +test_expect_success '"status" after file replacement should be clean with UC=false' ' + git config core.untrackedCache false && + git checkout HEAD~ && + status_is_clean && + status_is_clean && + git checkout master && + avoid_racy && + status_is_clean && + status_is_clean +' + test_done diff --git a/t/t7064-wtstatus-pv2.sh b/t/t7064-wtstatus-pv2.sh index e319fa2e84..b9a86d3347 100755 --- a/t/t7064-wtstatus-pv2.sh +++ b/t/t7064-wtstatus-pv2.sh @@ -46,11 +46,11 @@ test_expect_success 'before initial commit, things added' ' cat >expect <<-EOF && # branch.oid (initial) # branch.head master - 1 A. N... 000000 100644 100644 $_z40 $OID_A dir1/file_a - 1 A. N... 000000 100644 100644 $_z40 $OID_B dir1/file_b - 1 A. N... 000000 100644 100644 $_z40 $OID_X file_x - 1 A. N... 000000 100644 100644 $_z40 $OID_Y file_y - 1 A. N... 000000 100644 100644 $_z40 $OID_Z file_z + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_A dir1/file_a + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_B dir1/file_b + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_X file_x + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_Y file_y + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_Z file_z ? actual ? expect EOF @@ -63,11 +63,11 @@ test_expect_success 'before initial commit, things added (-z)' ' lf_to_nul >expect <<-EOF && # branch.oid (initial) # branch.head master - 1 A. N... 000000 100644 100644 $_z40 $OID_A dir1/file_a - 1 A. N... 000000 100644 100644 $_z40 $OID_B dir1/file_b - 1 A. N... 000000 100644 100644 $_z40 $OID_X file_x - 1 A. N... 000000 100644 100644 $_z40 $OID_Y file_y - 1 A. N... 000000 100644 100644 $_z40 $OID_Z file_z + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_A dir1/file_a + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_B dir1/file_b + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_X file_x + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_Y file_y + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_Z file_z ? actual ? expect EOF @@ -128,7 +128,7 @@ test_expect_success 'after first commit, stage existing changes' ' # branch.oid $H0 # branch.head master 1 M. N... 100644 100644 100644 $OID_X $OID_X1 file_x - 1 D. N... 100644 000000 000000 $OID_Z $_z40 file_z + 1 D. N... 100644 000000 000000 $OID_Z $ZERO_OID file_z ? actual ? expect EOF @@ -145,7 +145,7 @@ test_expect_success 'rename causes 2 path lines' ' # branch.oid $H0 # branch.head master 1 M. N... 100644 100644 100644 $OID_X $OID_X1 file_x - 1 D. N... 100644 000000 000000 $OID_Z $_z40 file_z + 1 D. N... 100644 000000 000000 $OID_Z $ZERO_OID file_z 2 R. N... 100644 100644 100644 $OID_Y $OID_Y R100 renamed_yQfile_y ? actual ? expect @@ -163,7 +163,7 @@ test_expect_success 'rename causes 2 path lines (-z)' ' # branch.oid $H0 # branch.head master 1 M. N... 100644 100644 100644 $OID_X $OID_X1 file_x - 1 D. N... 100644 000000 000000 $OID_Z $_z40 file_z + 1 D. N... 100644 000000 000000 $OID_Z $ZERO_OID file_z 2 R. N... 100644 100644 100644 $OID_Y $OID_Y R100 renamed_yQfile_y ? actual ? expect @@ -246,8 +246,8 @@ test_expect_success 'verify --intent-to-add output' ' git add --intent-to-add intent1.add intent2.add && cat >expect <<-EOF && - 1 .A N... 000000 000000 100644 $_z40 $_z40 intent1.add - 1 .A N... 000000 000000 100644 $_z40 $_z40 intent2.add + 1 .A N... 000000 000000 100644 $ZERO_OID $ZERO_OID intent1.add + 1 .A N... 000000 000000 100644 $ZERO_OID $ZERO_OID intent2.add EOF git status --porcelain=v2 >actual && @@ -280,7 +280,7 @@ test_expect_success 'verify AA (add-add) conflict' ' cat >expect <<-EOF && # branch.oid $HM # branch.head AA_M - u AA N... 000000 100644 100644 100644 $_z40 $OID_AA_B $OID_AA_A conflict.txt + u AA N... 000000 100644 100644 100644 $ZERO_OID $OID_AA_B $OID_AA_A conflict.txt EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -373,7 +373,7 @@ test_expect_success 'verify upstream fields in branch header' ' ## Test upstream-gone case. Fake this by pointing origin/master at ## a non-existing commit. OLD=$(git rev-parse origin/master) && - NEW=$_z40 && + NEW=$ZERO_OID && mv .git/packed-refs .git/old-packed-refs && sed "s/$OLD/$NEW/g" <.git/old-packed-refs >.git/packed-refs && @@ -390,6 +390,68 @@ test_expect_success 'verify upstream fields in branch header' ' ) ' +test_expect_success 'verify --[no-]ahead-behind with V2 format' ' + git checkout master && + test_when_finished "rm -rf sub_repo" && + git clone . sub_repo && + ( + ## Confirm local master tracks remote master. + cd sub_repo && + HUF=$(git rev-parse HEAD) && + + # Confirm --no-ahead-behind reports traditional branch.ab with 0/0 for equal branches. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + EOF + + git status --no-ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm --ahead-behind reports traditional branch.ab with 0/0. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +0 -0 + EOF + + git status --ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + ## Test non-equal ahead/behind. + echo xyz >file_xyz && + git add file_xyz && + git commit -m xyz && + + HUF=$(git rev-parse HEAD) && + + # Confirm --no-ahead-behind reports branch.ab with ?/? for non-equal branches. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +? -? + EOF + + git status --no-ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm --ahead-behind reports traditional branch.ab with 1/0. + cat >expect <<-EOF && + # branch.oid $HUF + # branch.head master + # branch.upstream origin/master + # branch.ab +1 -0 + EOF + + git status --ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual + ) +' + test_expect_success 'create and add submodule, submodule appears clean (A. S...)' ' git checkout master && git clone . sub_repo && @@ -407,8 +469,8 @@ test_expect_success 'create and add submodule, submodule appears clean (A. S...) # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 A. S... 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 A. S... 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -432,8 +494,8 @@ test_expect_success 'untracked changes in added submodule (AM S..U)' ' # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM S..U 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM S..U 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -457,8 +519,8 @@ test_expect_success 'staged changes in added submodule (AM S.M.)' ' # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM S.M. 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM S.M. 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -484,8 +546,8 @@ test_expect_success 'staged and unstaged changes in added (AM S.M.)' ' # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM S.M. 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM S.M. 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -511,8 +573,8 @@ test_expect_success 'staged and untracked changes in added submodule (AM S.MU)' # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM S.MU 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM S.MU 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -538,8 +600,8 @@ test_expect_success 'commit within the submodule appears as new commit in super # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM SC.. 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM SC.. 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 76c223c967..ab9da61da3 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -65,7 +65,7 @@ test_expect_success setup ' test_expect_success "checkout from non-existing branch" ' git checkout -b delete-me master && - rm .git/refs/heads/delete-me && + git update-ref -d --no-deref refs/heads/delete-me && test refs/heads/delete-me = "$(git symbolic-ref HEAD)" && git checkout master && test refs/heads/master = "$(git symbolic-ref HEAD)" diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index a39e69a3eb..48fd14fae6 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -126,6 +126,24 @@ test_expect_success 'submodule add' ' test_cmp empty untracked ' +test_expect_success 'setup parent and one repository' ' + test_create_repo parent && + test_commit -C parent one +' + +test_expect_success 'redirected submodule add does not show progress' ' + git -C addtest submodule add "file://$submodurl/parent" submod-redirected \ + 2>err && + ! grep % err && + test_i18ngrep ! "Checking connectivity" err +' + +test_expect_success 'redirected submodule add --progress does show progress' ' + git -C addtest submodule add --progress "file://$submodurl/parent" \ + submod-redirected-progress 2>err && \ + grep % err +' + test_expect_success 'submodule add to .gitignored path fails' ' ( cd addtest-ignore && @@ -821,6 +839,21 @@ test_expect_success 'moving the superproject does not break submodules' ' ) ' +test_expect_success 'moving the submodule does not break the superproject' ' + ( + cd addtest2 && + git submodule status + ) >actual && + sed -e "s/^ \([^ ]* repo\) .*/-\1/" <actual >expect && + mv addtest2/repo addtest2/repo.bak && + test_when_finished "mv addtest2/repo.bak addtest2/repo" && + ( + cd addtest2 && + git submodule status + ) >actual && + test_cmp expect actual +' + test_expect_success 'submodule add --name allows to replace a submodule with another at the same path' ' ( cd addtest2 && @@ -960,6 +993,11 @@ test_expect_success 'submodule deinit should remove the whole submodule section rmdir init ' +test_expect_success 'submodule deinit should unset core.worktree' ' + test_path_is_file .git/modules/example/config && + test_must_fail git config -f .git/modules/example/config core.worktree +' + test_expect_success 'submodule deinit from subdirectory' ' git submodule update --init && git config submodule.example.foo bar && diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index 6f083c4d68..9e0d31700e 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -65,7 +65,7 @@ test_expect_success 'setup a submodule tree' ' git commit -m "none" ) && git clone . recursivesuper && - ( cd recursivesuper + ( cd recursivesuper && git submodule add ../super super ) ' @@ -245,13 +245,13 @@ test_expect_success 'submodule update --remote should fetch upstream changes wit ( cd super && git submodule update --remote --force submodule && - git -C submodule log -1 --oneline >actual - git -C ../submodule log -1 --oneline master >expect + git -C submodule log -1 --oneline >actual && + git -C ../submodule log -1 --oneline master >expect && test_cmp expect actual && git checkout -b test-branch && git submodule update --remote --force submodule && - git -C submodule log -1 --oneline >actual - git -C ../submodule log -1 --oneline test-branch >expect + git -C submodule log -1 --oneline >actual && + git -C ../submodule log -1 --oneline test-branch >expect && test_cmp expect actual && git checkout master && git branch -d test-branch && @@ -891,7 +891,7 @@ test_expect_success 'submodule update properly revives a moved submodule' ' rm -rf submodule2 && mkdir -p "moved/sub module" && git update-index --add --cacheinfo 160000 $H "moved/sub module" && - git config -f .gitmodules submodule.submodule2.path "moved/sub module" + git config -f .gitmodules submodule.submodule2.path "moved/sub module" && git commit -am "post move" && git submodule update && git status | sed "s/$H2/XXX/" >actual && diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh index 6ba5daf42e..77729ac4aa 100755 --- a/t/t7407-submodule-foreach.sh +++ b/t/t7407-submodule-foreach.sh @@ -82,16 +82,16 @@ test_expect_success 'test basic "submodule foreach" usage' ' cat >expect <<EOF Entering '../sub1' -$pwd/clone-foo1-../sub1-$sub1sha1 +$pwd/clone-foo1-sub1-../sub1-$sub1sha1 Entering '../sub3' -$pwd/clone-foo3-../sub3-$sub3sha1 +$pwd/clone-foo3-sub3-../sub3-$sub3sha1 EOF test_expect_success 'test "submodule foreach" from subdirectory' ' mkdir clone/sub && ( cd clone/sub && - git submodule foreach "echo \$toplevel-\$name-\$sm_path-\$sha1" >../../actual + git submodule foreach "echo \$toplevel-\$name-\$sm_path-\$displaypath-\$sha1" >../../actual ) && test_i18ncmp expect actual ' @@ -196,6 +196,38 @@ test_expect_success 'test messages from "foreach --recursive" from subdirectory' ) && test_i18ncmp expect actual ' +sub1sha1=$(cd clone2/sub1 && git rev-parse HEAD) +sub2sha1=$(cd clone2/sub2 && git rev-parse HEAD) +sub3sha1=$(cd clone2/sub3 && git rev-parse HEAD) +nested1sha1=$(cd clone2/nested1 && git rev-parse HEAD) +nested2sha1=$(cd clone2/nested1/nested2 && git rev-parse HEAD) +nested3sha1=$(cd clone2/nested1/nested2/nested3 && git rev-parse HEAD) +submodulesha1=$(cd clone2/nested1/nested2/nested3/submodule && git rev-parse HEAD) + +cat >expect <<EOF +Entering '../nested1' +toplevel: $pwd/clone2 name: nested1 path: nested1 displaypath: ../nested1 hash: $nested1sha1 +Entering '../nested1/nested2' +toplevel: $pwd/clone2/nested1 name: nested2 path: nested2 displaypath: ../nested1/nested2 hash: $nested2sha1 +Entering '../nested1/nested2/nested3' +toplevel: $pwd/clone2/nested1/nested2 name: nested3 path: nested3 displaypath: ../nested1/nested2/nested3 hash: $nested3sha1 +Entering '../nested1/nested2/nested3/submodule' +toplevel: $pwd/clone2/nested1/nested2/nested3 name: submodule path: submodule displaypath: ../nested1/nested2/nested3/submodule hash: $submodulesha1 +Entering '../sub1' +toplevel: $pwd/clone2 name: foo1 path: sub1 displaypath: ../sub1 hash: $sub1sha1 +Entering '../sub2' +toplevel: $pwd/clone2 name: foo2 path: sub2 displaypath: ../sub2 hash: $sub2sha1 +Entering '../sub3' +toplevel: $pwd/clone2 name: foo3 path: sub3 displaypath: ../sub3 hash: $sub3sha1 +EOF + +test_expect_success 'test "submodule foreach --recursive" from subdirectory' ' + ( + cd clone2/untracked && + git submodule foreach --recursive "echo toplevel: \$toplevel name: \$name path: \$sm_path displaypath: \$displaypath hash: \$sha1" >../../actual + ) && + test_i18ncmp expect actual +' cat > expect <<EOF nested1-nested1 diff --git a/t/t7408-submodule-reference.sh b/t/t7408-submodule-reference.sh index e159fc5035..08d9add05e 100755 --- a/t/t7408-submodule-reference.sh +++ b/t/t7408-submodule-reference.sh @@ -59,6 +59,16 @@ test_expect_success 'submodule add --reference uses alternates' ' test_alternate_is_used super/.git/modules/sub/objects/info/alternates super/sub ' +test_expect_success 'submodule add --reference with --dissociate does not use alternates' ' + ( + cd super && + git submodule add --reference ../B --dissociate "file://$base_dir/A" sub-dissociate && + git commit -m B-super-added && + git repack -ad + ) && + test_path_is_missing super/.git/modules/sub-dissociate/objects/info/alternates +' + test_expect_success 'that reference gets used with add' ' ( cd super/sub && @@ -82,6 +92,13 @@ test_expect_success 'updating superproject keeps alternates' ' test_alternate_is_used super-clone/.git/modules/sub/objects/info/alternates super-clone/sub ' +test_expect_success 'updating superproject with --dissociate does not keep alternates' ' + test_when_finished "rm -rf super-clone" && + git clone super super-clone && + git -C super-clone submodule update --init --reference ../B --dissociate && + test_path_is_missing super-clone/.git/modules/sub/objects/info/alternates +' + test_expect_success 'submodules use alternates when cloning a superproject' ' test_when_finished "rm -rf super-clone" && git clone --reference super --recursive super super-clone && diff --git a/t/t7411-submodule-config.sh b/t/t7411-submodule-config.sh index 46c09c7765..0bde5850ac 100755 --- a/t/t7411-submodule-config.sh +++ b/t/t7411-submodule-config.sh @@ -41,7 +41,7 @@ test_expect_success 'configuration parsing with error' ' EOF ( cd repo && - test_must_fail test-submodule-config "" s 2>actual && + test_must_fail test-tool submodule-config "" s 2>actual && test_i18ngrep "bad config" actual ) ' @@ -55,7 +55,7 @@ EOF test_expect_success 'test parsing and lookup of submodule config by path' ' (cd super && - test-submodule-config \ + test-tool submodule-config \ HEAD^ a \ HEAD b \ HEAD^ submodule \ @@ -67,7 +67,7 @@ test_expect_success 'test parsing and lookup of submodule config by path' ' test_expect_success 'test parsing and lookup of submodule config by name' ' (cd super && - test-submodule-config --name \ + test-tool submodule-config --name \ HEAD^ a \ HEAD a \ HEAD^ submodule \ @@ -89,7 +89,7 @@ test_expect_success 'error in one submodule config lets continue' ' git add .gitmodules && mv .gitmodules.bak .gitmodules && git commit -m "add error" && - test-submodule-config \ + test-tool submodule-config \ HEAD b \ HEAD submodule \ >actual && @@ -100,7 +100,7 @@ test_expect_success 'error in one submodule config lets continue' ' test_expect_success 'error message contains blob reference' ' (cd super && sha1=$(git rev-parse HEAD) && - test-submodule-config \ + test-tool submodule-config \ HEAD b \ HEAD submodule \ 2>actual_err && @@ -114,9 +114,9 @@ test_expect_success 'using different treeishs works' ' git tag new_tag && tree=$(git rev-parse HEAD^{tree}) && commit=$(git rev-parse HEAD^{commit}) && - test-submodule-config $commit b >expect && - test-submodule-config $tree b >actual.1 && - test-submodule-config new_tag b >actual.2 && + test-tool submodule-config $commit b >expect && + test-tool submodule-config $tree b >actual.1 && + test-tool submodule-config new_tag b >actual.2 && test_cmp expect actual.1 && test_cmp expect actual.2 ) @@ -130,7 +130,7 @@ test_expect_success 'error in history in fetchrecursesubmodule lets continue' ' git config --unset -f .gitmodules \ submodule.submodule.fetchrecursesubmodules && git commit -m "add error in fetchrecursesubmodules" && - test-submodule-config \ + test-tool submodule-config \ HEAD b \ HEAD submodule \ >actual && diff --git a/t/t7415-submodule-names.sh b/t/t7415-submodule-names.sh index 75fa071c6d..b68c5f5e85 100755 --- a/t/t7415-submodule-names.sh +++ b/t/t7415-submodule-names.sh @@ -6,6 +6,7 @@ Exercise the name-checking function on a variety of names, and then give a real-world setup that confirms we catch this in practice. ' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-pack.sh test_expect_success 'check names' ' cat >expect <<-\EOF && @@ -73,4 +74,106 @@ test_expect_success 'clone evil superproject' ' ! grep "RUNNING POST CHECKOUT" output ' +test_expect_success 'fsck detects evil superproject' ' + test_must_fail git fsck +' + +test_expect_success 'transfer.fsckObjects detects evil superproject (unpack)' ' + rm -rf dst.git && + git init --bare dst.git && + git -C dst.git config transfer.fsckObjects true && + test_must_fail git push dst.git HEAD +' + +test_expect_success 'transfer.fsckObjects detects evil superproject (index)' ' + rm -rf dst.git && + git init --bare dst.git && + git -C dst.git config transfer.fsckObjects true && + git -C dst.git config transfer.unpackLimit 1 && + test_must_fail git push dst.git HEAD +' + +# Normally our packs contain commits followed by trees followed by blobs. This +# reverses the order, which requires backtracking to find the context of a +# blob. We'll start with a fresh gitmodules-only tree to make it simpler. +test_expect_success 'create oddly ordered pack' ' + git checkout --orphan odd && + git rm -rf --cached . && + git add .gitmodules && + git commit -m odd && + { + pack_header 3 && + pack_obj $(git rev-parse HEAD:.gitmodules) && + pack_obj $(git rev-parse HEAD^{tree}) && + pack_obj $(git rev-parse HEAD) + } >odd.pack && + pack_trailer odd.pack +' + +test_expect_success 'transfer.fsckObjects handles odd pack (unpack)' ' + rm -rf dst.git && + git init --bare dst.git && + test_must_fail git -C dst.git unpack-objects --strict <odd.pack +' + +test_expect_success 'transfer.fsckObjects handles odd pack (index)' ' + rm -rf dst.git && + git init --bare dst.git && + test_must_fail git -C dst.git index-pack --strict --stdin <odd.pack +' + +test_expect_success 'index-pack --strict works for non-repo pack' ' + rm -rf dst.git && + git init --bare dst.git && + cp odd.pack dst.git && + test_must_fail git -C dst.git index-pack --strict odd.pack 2>output && + # Make sure we fail due to bad gitmodules content, not because we + # could not read the blob in the first place. + grep gitmodulesName output +' + +test_expect_success 'fsck detects symlinked .gitmodules file' ' + git init symlink && + ( + cd symlink && + + # Make the tree directly to avoid index restrictions. + # + # Because symlinks store the target as a blob, choose + # a pathname that could be parsed as a .gitmodules file + # to trick naive non-symlink-aware checking. + tricky="[foo]bar=true" && + content=$(git hash-object -w ../.gitmodules) && + target=$(printf "$tricky" | git hash-object -w --stdin) && + { + printf "100644 blob $content\t$tricky\n" && + printf "120000 blob $target\t.gitmodules\n" + } | git mktree && + + # Check not only that we fail, but that it is due to the + # symlink detector; this grep string comes from the config + # variable name and will not be translated. + test_must_fail git fsck 2>output && + grep gitmodulesSymlink output + ) +' + +test_expect_success 'fsck detects non-blob .gitmodules' ' + git init non-blob && + ( + cd non-blob && + + # As above, make the funny tree directly to avoid index + # restrictions. + mkdir subdir && + cp ../.gitmodules subdir/file && + git add subdir/file && + git commit -m ok && + git ls-tree HEAD | sed s/subdir/.gitmodules/ | git mktree && + + test_must_fail git fsck 2>output && + grep gitmodulesBlob output + ) +' + test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index fa61b1a4ee..9dbbd01fc0 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -52,6 +52,18 @@ test_expect_success PERL 'can use paths with --interactive' ' git reset --hard HEAD^ ' +test_expect_success 'removed files and relative paths' ' + test_when_finished "rm -rf foo" && + git init foo && + >foo/foo.txt && + git -C foo add foo.txt && + git -C foo commit -m first && + git -C foo rm foo.txt && + + mkdir -p foo/bar && + git -C foo/bar commit -m second ../foo.txt +' + test_expect_success 'using invalid commit with -C' ' test_must_fail git commit --allow-empty -C bogus ' diff --git a/t/t7505-prepare-commit-msg-hook.sh b/t/t7505-prepare-commit-msg-hook.sh index b13f72975e..1f43b3cd4c 100755 --- a/t/t7505-prepare-commit-msg-hook.sh +++ b/t/t7505-prepare-commit-msg-hook.sh @@ -4,6 +4,38 @@ test_description='prepare-commit-msg hook' . ./test-lib.sh +test_expect_success 'set up commits for rebasing' ' + test_commit root && + test_commit a a a && + test_commit b b b && + git checkout -b rebase-me root && + test_commit rebase-a a aa && + test_commit rebase-b b bb && + for i in $(test_seq 1 13) + do + test_commit rebase-$i c $i + done && + git checkout master && + + cat >rebase-todo <<-EOF + pick $(git rev-parse rebase-a) + pick $(git rev-parse rebase-b) + fixup $(git rev-parse rebase-1) + fixup $(git rev-parse rebase-2) + pick $(git rev-parse rebase-3) + fixup $(git rev-parse rebase-4) + squash $(git rev-parse rebase-5) + reword $(git rev-parse rebase-6) + squash $(git rev-parse rebase-7) + fixup $(git rev-parse rebase-8) + fixup $(git rev-parse rebase-9) + edit $(git rev-parse rebase-10) + squash $(git rev-parse rebase-11) + squash $(git rev-parse rebase-12) + edit $(git rev-parse rebase-13) + EOF +' + test_expect_success 'with no hook' ' echo "foo" > file && @@ -31,17 +63,41 @@ mkdir -p "$HOOKDIR" echo "#!$SHELL_PATH" > "$HOOK" cat >> "$HOOK" <<'EOF' -if test "$2" = commit; then - source=$(git rev-parse "$3") +GIT_DIR=$(git rev-parse --git-dir) +if test -d "$GIT_DIR/rebase-merge" +then + rebasing=1 else - source=${2-default} + rebasing=0 fi -if test "$GIT_EDITOR" = :; then - sed -e "1s/.*/$source (no editor)/" "$1" > msg.tmp + +get_last_cmd () { + tail -n1 "$GIT_DIR/rebase-merge/done" | { + read cmd id _ + git log --pretty="[$cmd %s]" -n1 $id + } +} + +if test "$2" = commit +then + if test $rebasing = 1 + then + source="$3" + else + source=$(git rev-parse "$3") + fi else - sed -e "1s/.*/$source/" "$1" > msg.tmp + source=${2-default} +fi +test "$GIT_EDITOR" = : && source="$source (no editor)" + +if test $rebasing = 1 +then + echo "$source $(get_last_cmd)" >"$1" +else + sed -e "1s/.*/$source/" "$1" >msg.tmp + mv msg.tmp "$1" fi -mv msg.tmp "$1" exit 0 EOF chmod +x "$HOOK" @@ -156,6 +212,63 @@ test_expect_success 'with hook and editor (merge)' ' test "$(git log -1 --pretty=format:%s)" = "merge" ' +test_rebase () { + expect=$1 && + mode=$2 && + test_expect_$expect C_LOCALE_OUTPUT "with hook (rebase $mode)" ' + test_when_finished "\ + git rebase --abort + git checkout -f master + git branch -D tmp" && + git checkout -b tmp rebase-me && + GIT_SEQUENCE_EDITOR="cp rebase-todo" && + GIT_EDITOR="\"$FAKE_EDITOR\"" && + ( + export GIT_SEQUENCE_EDITOR GIT_EDITOR && + test_must_fail git rebase $mode b && + echo x >a && + git add a && + test_must_fail git rebase --continue && + echo x >b && + git add b && + git commit && + git rebase --continue && + echo y >a && + git add a && + git commit && + git rebase --continue && + echo y >b && + git add b && + git rebase --continue + ) && + if test $mode = -p # reword amended after pick + then + n=18 + else + n=17 + fi && + git log --pretty=%s -g -n$n HEAD@{1} >actual && + test_cmp "$TEST_DIRECTORY/t7505/expected-rebase$mode" actual + ' +} + +test_rebase success -i +test_rebase success -p + +test_expect_success 'with hook (cherry-pick)' ' + test_when_finished "git checkout -f master" && + git checkout -B other b && + git cherry-pick rebase-1 && + test "$(git log -1 --pretty=format:%s)" = "message (no editor)" +' + +test_expect_success 'with hook and editor (cherry-pick)' ' + test_when_finished "git checkout -f master" && + git checkout -B other b && + git cherry-pick -e rebase-1 && + test "$(git log -1 --pretty=format:%s)" = merge +' + cat > "$HOOK" <<'EOF' #!/bin/sh exit 1 @@ -197,4 +310,11 @@ test_expect_success 'with failing hook (merge)' ' ' +test_expect_success C_LOCALE_OUTPUT 'with failing hook (cherry-pick)' ' + test_when_finished "git checkout -f master" && + git checkout -B other b && + test_must_fail git cherry-pick rebase-1 2>actual && + test $(grep -c prepare-commit-msg actual) = 1 +' + test_done diff --git a/t/t7505/expected-rebase-i b/t/t7505/expected-rebase-i new file mode 100644 index 0000000000..c514bdbb94 --- /dev/null +++ b/t/t7505/expected-rebase-i @@ -0,0 +1,17 @@ +message [edit rebase-13] +message (no editor) [edit rebase-13] +message [squash rebase-12] +message (no editor) [squash rebase-11] +default [edit rebase-10] +message (no editor) [edit rebase-10] +message [fixup rebase-9] +message (no editor) [fixup rebase-8] +message (no editor) [squash rebase-7] +message [reword rebase-6] +message [squash rebase-5] +message (no editor) [fixup rebase-4] +message (no editor) [pick rebase-3] +message (no editor) [fixup rebase-2] +message (no editor) [fixup rebase-1] +merge [pick rebase-b] +message [pick rebase-a] diff --git a/t/t7505/expected-rebase-p b/t/t7505/expected-rebase-p new file mode 100644 index 0000000000..93bada596e --- /dev/null +++ b/t/t7505/expected-rebase-p @@ -0,0 +1,18 @@ +message [edit rebase-13] +message (no editor) [edit rebase-13] +message [squash rebase-12] +message (no editor) [squash rebase-11] +default [edit rebase-10] +message (no editor) [edit rebase-10] +message [fixup rebase-9] +message (no editor) [fixup rebase-8] +message (no editor) [squash rebase-7] +HEAD [reword rebase-6] +message (no editor) [reword rebase-6] +message [squash rebase-5] +message (no editor) [fixup rebase-4] +message (no editor) [pick rebase-3] +message (no editor) [fixup rebase-2] +message (no editor) [fixup rebase-1] +merge [pick rebase-b] +message [pick rebase-a] diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh index 9edf6572ed..b4b74dbe29 100755 --- a/t/t7506-status-submodule.sh +++ b/t/t7506-status-submodule.sh @@ -18,7 +18,7 @@ test_create_repo_with_commit () { } sanitize_output () { - sed -e "s/$_x40/HASH/" -e "s/$_x40/HASH/" output >output2 && + sed -e "s/$OID_REGEX/HASH/" -e "s/$OID_REGEX/HASH/" output >output2 && mv output2 output } diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 50052e2872..e1f11293e2 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -1099,6 +1099,7 @@ EOF ' test_expect_success POSIXPERM,SANITY 'status succeeds in a read-only repository' ' + test_when_finished "chmod 775 .git" && ( chmod a-w .git && # make dir1/tracked stat-dirty @@ -1108,9 +1109,6 @@ test_expect_success POSIXPERM,SANITY 'status succeeds in a read-only repository' # make sure "status" succeeded without writing index out git diff-files | grep dir1/tracked ) - status=$? - chmod 775 .git - (exit $status) ' (cd sm && echo > bar && git add bar && git commit -q -m 'Add bar') && git add sm @@ -1672,12 +1670,12 @@ test_expect_success '"Initial commit" should not be noted in commit template' ' ' test_expect_success '--no-optional-locks prevents index update' ' - test-chmtime =1234567890 .git/index && + test-tool chmtime =1234567890 .git/index && git --no-optional-locks status && - test-chmtime -v +0 .git/index >out && + test-tool chmtime --get .git/index >out && grep ^1234567890 out && git status && - test-chmtime -v +0 .git/index >out && + test-tool chmtime --get .git/index >out && ! grep ^1234567890 out ' diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 762135adea..6e2015ed9a 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -142,10 +142,9 @@ test_expect_success GPG 'show signed commit with signature' ' test_expect_success GPG 'detect fudged signature' ' git cat-file commit seventh-signed >raw && - - sed -e "s/seventh/7th forged/" raw >forged1 && + sed -e "s/^seventh/7th forged/" raw >forged1 && git hash-object -w -t commit forged1 >forged1.commit && - ! git verify-commit $(cat forged1.commit) && + test_must_fail git verify-commit $(cat forged1.commit) && git show --pretty=short --show-signature $(cat forged1.commit) >actual1 && grep "BAD signature from" actual1 && ! grep "Good signature from" actual1 @@ -156,7 +155,7 @@ test_expect_success GPG 'detect fudged signature with NUL' ' cat raw >forged2 && echo Qwik | tr "Q" "\000" >>forged2 && git hash-object -w -t commit forged2 >forged2.commit && - ! git verify-commit $(cat forged2.commit) && + test_must_fail git verify-commit $(cat forged2.commit) && git show --pretty=short --show-signature $(cat forged2.commit) >actual2 && grep "BAD signature from" actual2 && ! grep "Good signature from" actual2 diff --git a/t/t7519-status-fsmonitor.sh b/t/t7519-status-fsmonitor.sh index eb2d13bbcf..756beb0d8e 100755 --- a/t/t7519-status-fsmonitor.sh +++ b/t/t7519-status-fsmonitor.sh @@ -314,4 +314,43 @@ test_expect_success 'splitting the index results in the same state' ' test_cmp expect actual ' +test_expect_success UNTRACKED_CACHE 'ignore .git changes when invalidating UNTR' ' + test_create_repo dot-git && + ( + cd dot-git && + mkdir -p .git/hooks && + : >tracked && + : >modified && + mkdir dir1 && + : >dir1/tracked && + : >dir1/modified && + mkdir dir2 && + : >dir2/tracked && + : >dir2/modified && + write_integration_script && + git config core.fsmonitor .git/hooks/fsmonitor-test && + git update-index --untracked-cache && + git update-index --fsmonitor && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace-before" \ + git status && + test-dump-untracked-cache >../before + ) && + cat >>dot-git/.git/hooks/fsmonitor-test <<-\EOF && + printf ".git\0" + printf ".git/index\0" + printf "dir1/.git\0" + printf "dir1/.git/index\0" + EOF + ( + cd dot-git && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace-after" \ + git status && + test-dump-untracked-cache >../after + ) && + grep "directory invalidation" trace-before >>before && + grep "directory invalidation" trace-after >>after && + # UNTR extension unchanged, dir invalidation count unchanged + test_cmp before after +' + test_done diff --git a/t/t7525-status-rename.sh b/t/t7525-status-rename.sh new file mode 100755 index 0000000000..ef8b1b3078 --- /dev/null +++ b/t/t7525-status-rename.sh @@ -0,0 +1,113 @@ +#!/bin/sh + +test_description='git status rename detection options' + +. ./test-lib.sh + +test_expect_success 'setup' ' + echo 1 >original && + git add . && + git commit -m"Adding original file." && + mv original renamed && + echo 2 >> renamed && + git add . && + cat >.gitignore <<-\EOF + .gitignore + expect* + actual* + EOF +' + +test_expect_success 'status no-options' ' + git status >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'status --no-renames' ' + git status --no-renames >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status.renames inherits from diff.renames false' ' + git -c diff.renames=false status >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status.renames inherits from diff.renames true' ' + git -c diff.renames=true status >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'status.renames overrides diff.renames false' ' + git -c diff.renames=true -c status.renames=false status >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status.renames overrides from diff.renames true' ' + git -c diff.renames=false -c status.renames=true status >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'status status.renames=false' ' + git -c status.renames=false status >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status status.renames=true' ' + git -c status.renames=true status >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'commit honors status.renames=false' ' + git -c status.renames=false commit --dry-run >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'commit honors status.renames=true' ' + git -c status.renames=true commit --dry-run >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'status config overridden' ' + git -c status.renames=true status --no-renames >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status score=100%' ' + git status -M=100% >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual && + + git status --find-rename=100% >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status score=01%' ' + git status -M=01% >actual && + test_i18ngrep "renamed:" actual && + + git status --find-rename=01% >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'copies not overridden by find-rename' ' + cp renamed copy && + git add copy && + + git -c status.renames=copies status -M=01% >actual && + test_i18ngrep "copied:" actual && + test_i18ngrep "renamed:" actual && + + git -c status.renames=copies status --find-rename=01% >actual && + test_i18ngrep "copied:" actual && + test_i18ngrep "renamed:" actual +' + +test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index dfde6a675a..6736d8d131 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -700,6 +700,42 @@ test_expect_success 'merge --no-ff --edit' ' test_cmp expected actual ' +test_expect_success 'merge annotated/signed tag w/o tracking' ' + test_when_finished "rm -rf dst; git tag -d anno1" && + git tag -a -m "anno c1" anno1 c1 && + git init dst && + git rev-parse c1 >dst/expect && + ( + # c0 fast-forwards to c1 but because this repository + # is not a "downstream" whose refs/tags follows along + # tag from the "upstream", this pull defaults to --no-ff + cd dst && + git pull .. c0 && + git pull .. anno1 && + git rev-parse HEAD^2 >actual && + test_cmp expect actual + ) +' + +test_expect_success 'merge annotated/signed tag w/ tracking' ' + test_when_finished "rm -rf dst; git tag -d anno1" && + git tag -a -m "anno c1" anno1 c1 && + git init dst && + git rev-parse c1 >dst/expect && + ( + # c0 fast-forwards to c1 and because this repository + # is a "downstream" whose refs/tags follows along + # tag from the "upstream", this pull defaults to --ff + cd dst && + git remote add origin .. && + git pull origin c0 && + git fetch origin && + git merge anno1 && + git rev-parse HEAD >actual && + test_cmp expect actual + ) +' + test_expect_success GPG 'merge --ff-only tag' ' git reset --hard c0 && git commit --allow-empty -m "A newer commit" && @@ -718,7 +754,7 @@ test_expect_success GPG 'merge --no-edit tag should skip editor' ' git tag -f -s -m "A newer commit" signed && git reset --hard c0 && - EDITOR=false git merge --no-edit signed && + EDITOR=false git merge --no-edit --no-ff signed && git rev-parse signed^0 >expect && git rev-parse HEAD^2 >actual && test_cmp expect actual diff --git a/t/t7607-merge-overwrite.sh b/t/t7607-merge-overwrite.sh index 9444d6a9b9..dd8ab7ede1 100755 --- a/t/t7607-merge-overwrite.sh +++ b/t/t7607-merge-overwrite.sh @@ -92,12 +92,15 @@ test_expect_success 'will not overwrite removed file with staged changes' ' test_cmp important c1.c ' -test_expect_failure 'will not overwrite unstaged changes in renamed file' ' +test_expect_success 'will not overwrite unstaged changes in renamed file' ' git reset --hard c1 && git mv c1.c other.c && git commit -m rename && cp important other.c && - git merge c1a && + test_must_fail git merge c1a >out && + test_i18ngrep "Refusing to lose dirty file at other.c" out && + test_path_is_file other.c~HEAD && + test $(git hash-object other.c~HEAD) = $(git rev-parse c1a:c1.c) && test_cmp important other.c ' diff --git a/t/t7612-merge-verify-signatures.sh b/t/t7612-merge-verify-signatures.sh index e797c74112..e2b1df817a 100755 --- a/t/t7612-merge-verify-signatures.sh +++ b/t/t7612-merge-verify-signatures.sh @@ -23,7 +23,7 @@ test_expect_success GPG 'create signed commits' ' echo 3 >bar && git add bar && test_tick && git commit -S -m "bad on side" && git cat-file commit side-bad >raw && - sed -e "s/bad/forged bad/" raw >forged && + sed -e "s/^bad/forged bad/" raw >forged && git hash-object -w -t commit forged >forged.commit && git checkout initial && diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 6061a04147..6162e2a8e6 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -4,6 +4,12 @@ test_description='git repack works correctly' . ./test-lib.sh +commit_and_pack() { + test_commit "$@" >/dev/null && + SHA1=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) && + echo pack-${SHA1}.pack +} + test_expect_success 'objects in packs marked .keep are not repacked' ' echo content1 > file1 && echo content2 > file2 && @@ -194,7 +200,26 @@ test_expect_success 'objects made unreachable by grafts only are kept' ' git reflog expire --expire=$test_tick --expire-unreachable=$test_tick --all && git repack -a -d && git cat-file -t $H1 - ' +' + +test_expect_success 'repack --keep-pack' ' + test_create_repo keep-pack && + ( + cd keep-pack && + P1=$(commit_and_pack 1) && + P2=$(commit_and_pack 2) && + P3=$(commit_and_pack 3) && + P4=$(commit_and_pack 4) && + ls .git/objects/pack/*.pack >old-counts && + test_line_count = 4 old-counts && + git repack -a -d --keep-pack $P1 --keep-pack $P4 && + ls .git/objects/pack/*.pack >new-counts && + grep -q $P1 new-counts && + grep -q $P4 new-counts && + test_line_count = 3 new-counts && + git fsck + ) +' test_done diff --git a/t/t7701-repack-unpack-unreachable.sh b/t/t7701-repack-unpack-unreachable.sh index 987573c41f..48261ba080 100755 --- a/t/t7701-repack-unpack-unreachable.sh +++ b/t/t7701-repack-unpack-unreachable.sh @@ -55,8 +55,8 @@ test_expect_success '-A with -d option leaves unreachable objects unpacked' ' compare_mtimes () { - read tref rest && - while read t rest; do + read tref && + while read t; do test "$tref" = "$t" || return 1 done } @@ -90,7 +90,7 @@ test_expect_success 'unpacked objects receive timestamp of pack file' ' tmppack=".git/objects/pack/tmp_pack" && ln "$packfile" "$tmppack" && git repack -A -l -d && - test-chmtime -v +0 "$tmppack" "$fsha1path" "$csha1path" "$tsha1path" \ + test-tool chmtime --get "$tmppack" "$fsha1path" "$csha1path" "$tsha1path" \ > mtimes && compare_mtimes < mtimes ' @@ -103,7 +103,7 @@ test_expect_success 'do not bother loosening old objects' ' git prune-packed && git cat-file -p $obj1 && git cat-file -p $obj2 && - test-chmtime =-86400 .git/objects/pack/pack-$pack2.pack && + test-tool chmtime =-86400 .git/objects/pack/pack-$pack2.pack && git repack -A -d --unpack-unreachable=1.hour.ago && git cat-file -p $obj1 && test_must_fail git cat-file -p $obj2 @@ -117,7 +117,7 @@ test_expect_success 'keep packed objects found only in index' ' git reset HEAD^ && git reflog expire --expire=now --all && git add file && - test-chmtime =-86400 .git/objects/pack/* && + test-tool chmtime =-86400 .git/objects/pack/* && git gc --prune=1.hour.ago && git cat-file blob :file ' diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 1797f632a3..9312c8daf5 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -99,6 +99,101 @@ do test_cmp expected actual ' + test_expect_success "grep -w $L (with --column)" ' + { + echo ${HC}file:5:foo mmap bar + echo ${HC}file:14:foo_mmap bar mmap + echo ${HC}file:5:foo mmap bar_mmap + echo ${HC}file:14:foo_mmap bar mmap baz + } >expected && + git grep --column -w -e mmap $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep -w $L (with --column, extended OR)" ' + { + echo ${HC}file:14:foo_mmap bar mmap + echo ${HC}file:19:foo_mmap bar mmap baz + } >expected && + git grep --column -w -e mmap$ --or -e baz $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep -w $L (with --column, --invert)" ' + { + echo ${HC}file:1:foo mmap bar + echo ${HC}file:1:foo_mmap bar + echo ${HC}file:1:foo_mmap bar mmap + echo ${HC}file:1:foo mmap bar_mmap + } >expected && + git grep --column --invert -w -e baz $H -- file >actual && + test_cmp expected actual + ' + + test_expect_success "grep $L (with --column, --invert, extended OR)" ' + { + echo ${HC}hello_world:6:HeLLo_world + } >expected && + git grep --column --invert -e ll --or --not -e _ $H -- hello_world \ + >actual && + test_cmp expected actual + ' + + test_expect_success "grep $L (with --column, --invert, extended AND)" ' + { + echo ${HC}hello_world:3:Hello world + echo ${HC}hello_world:3:Hello_world + echo ${HC}hello_world:6:HeLLo_world + } >expected && + git grep --column --invert --not -e _ --and --not -e ll $H -- hello_world \ + >actual && + test_cmp expected actual + ' + + test_expect_success "grep $L (with --column, double-negation)" ' + { + echo ${HC}file:1:foo_mmap bar mmap baz + } >expected && + git grep --column --not \( --not -e foo --or --not -e baz \) $H -- file \ + >actual && + test_cmp expected actual + ' + + test_expect_success "grep -w $L (with --column, -C)" ' + { + echo ${HC}file:5:foo mmap bar + echo ${HC}file-foo_mmap bar + echo ${HC}file:14:foo_mmap bar mmap + echo ${HC}file:5:foo mmap bar_mmap + echo ${HC}file:14:foo_mmap bar mmap baz + } >expected && + git grep --column -w -C1 -e mmap $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep -w $L (with --line-number, --column)" ' + { + echo ${HC}file:1:5:foo mmap bar + echo ${HC}file:3:14:foo_mmap bar mmap + echo ${HC}file:4:5:foo mmap bar_mmap + echo ${HC}file:5:14:foo_mmap bar mmap baz + } >expected && + git grep -n --column -w -e mmap $H >actual && + test_cmp expected actual + ' + + test_expect_success "grep -w $L (with non-extended patterns, --column)" ' + { + echo ${HC}file:5:foo mmap bar + echo ${HC}file:10:foo_mmap bar + echo ${HC}file:10:foo_mmap bar mmap + echo ${HC}file:5:foo mmap bar_mmap + echo ${HC}file:10:foo_mmap bar mmap baz + } >expected && + git grep --column -w -e bar -e mmap $H >actual && + test_cmp expected actual + ' + test_expect_success "grep -w $L" ' { echo ${HC}file:1:foo mmap bar diff --git a/t/t7812-grep-icase-non-ascii.sh b/t/t7812-grep-icase-non-ascii.sh index 0059a1f837..0c685d3598 100755 --- a/t/t7812-grep-icase-non-ascii.sh +++ b/t/t7812-grep-icase-non-ascii.sh @@ -12,7 +12,7 @@ test_expect_success GETTEXT_LOCALE 'setup' ' ' test_have_prereq GETTEXT_LOCALE && -test-regex "HALLÓ" "Halló" ICASE && +test-tool regex "HALLÓ" "Halló" ICASE && test_set_prereq REGEX_LOCALE test_expect_success REGEX_LOCALE 'grep literal string, no -F' ' diff --git a/t/t8012-blame-colors.sh b/t/t8012-blame-colors.sh new file mode 100755 index 0000000000..ed38f74de9 --- /dev/null +++ b/t/t8012-blame-colors.sh @@ -0,0 +1,48 @@ +#!/bin/sh + +test_description='colored git blame' +. ./test-lib.sh + +PROG='git blame -c' +. "$TEST_DIRECTORY"/annotate-tests.sh + +test_expect_success 'colored blame colors contiguous lines' ' + git -c color.blame.repeatedLines=yellow blame --color-lines --abbrev=12 hello.c >actual.raw && + git -c color.blame.repeatedLines=yellow -c blame.coloring=repeatedLines blame --abbrev=12 hello.c >actual.raw.2 && + test_cmp actual.raw actual.raw.2 && + test_decode_color <actual.raw >actual && + grep "<YELLOW>" <actual >darkened && + grep "(F" darkened > F.expect && + grep "(H" darkened > H.expect && + test_line_count = 2 F.expect && + test_line_count = 3 H.expect +' + +test_expect_success 'color by age consistently colors old code' ' + git blame --color-by-age hello.c >actual.raw && + git -c blame.coloring=highlightRecent blame hello.c >actual.raw.2 && + test_cmp actual.raw actual.raw.2 && + test_decode_color <actual.raw >actual && + grep "<BLUE>" <actual >colored && + test_line_count = 10 colored +' + +test_expect_success 'blame color by age: new code is different' ' + cat >>hello.c <<-EOF && + void qfunc(); + EOF + git add hello.c && + GIT_AUTHOR_DATE="" git commit -m "new commit" && + + git -c color.blame.highlightRecent="yellow,1 month ago, cyan" blame --color-by-age hello.c >actual.raw && + test_decode_color <actual.raw >actual && + + grep "<YELLOW>" <actual >colored && + test_line_count = 10 colored && + + grep "<CYAN>" <actual >colored && + test_line_count = 1 colored && + grep qfunc colored +' + +test_done diff --git a/t/t9000-addresses.sh b/t/t9000-addresses.sh deleted file mode 100755 index a1ebef6de2..0000000000 --- a/t/t9000-addresses.sh +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -test_description='compare address parsing with and without Mail::Address' -. ./test-lib.sh - -if ! test_have_prereq PERL; then - skip_all='skipping perl interface tests, perl not available' - test_done -fi - -perl -MTest::More -e 0 2>/dev/null || { - skip_all="Perl Test::More unavailable, skipping test" - test_done -} - -perl -MMail::Address -e 0 2>/dev/null || { - skip_all="Perl Mail::Address unavailable, skipping test" - test_done -} - -test_external_has_tap=1 - -test_external_without_stderr \ - 'Perl address parsing function' \ - perl "$TEST_DIRECTORY"/t9000/test.pl - -test_done diff --git a/t/t9000/test.pl b/t/t9000/test.pl deleted file mode 100755 index dfeaa9c655..0000000000 --- a/t/t9000/test.pl +++ /dev/null @@ -1,67 +0,0 @@ -#!/usr/bin/perl -use lib (split(/:/, $ENV{GITPERLLIB})); - -use 5.008; -use warnings; -use strict; - -use Test::More qw(no_plan); -use Mail::Address; - -BEGIN { use_ok('Git') } - -my @success_list = (q[Jane], - q[jdoe@example.com], - q[<jdoe@example.com>], - q[Jane <jdoe@example.com>], - q[Jane Doe <jdoe@example.com>], - q["Jane" <jdoe@example.com>], - q["Doe, Jane" <jdoe@example.com>], - q["Jane@:;\>.,()<Doe" <jdoe@example.com>], - q[Jane!#$%&'*+-/=?^_{|}~Doe' <jdoe@example.com>], - q["<jdoe@example.com>"], - q["Jane jdoe@example.com"], - q[Jane Doe <jdoe @ example.com >], - q[Jane Doe < jdoe@example.com >], - q[Jane @ Doe @ Jane @ Doe], - q["Jane, 'Doe'" <jdoe@example.com>], - q['Doe, "Jane' <jdoe@example.com>], - q["Jane" "Do"e <jdoe@example.com>], - q["Jane' Doe" <jdoe@example.com>], - q["Jane Doe <jdoe@example.com>" <jdoe@example.com>], - q["Jane\" Doe" <jdoe@example.com>], - q[Doe, jane <jdoe@example.com>], - q["Jane Doe <jdoe@example.com>], - q['Jane 'Doe' <jdoe@example.com>], - q[Jane@:;\.,()<>Doe <jdoe@example.com>], - q[Jane <jdoe@example.com> Doe], - q[<jdoe@example.com> Jane Doe]); - -my @known_failure_list = (q[Jane\ Doe <jdoe@example.com>], - q["Doe, Ja"ne <jdoe@example.com>], - q["Doe, Katarina" Jane <jdoe@example.com>], - q[Jane jdoe@example.com], - q["Jane "Kat"a" ri"na" ",Doe" <jdoe@example.com>], - q[Jane Doe], - q[Jane "Doe <jdoe@example.com>"], - q[\"Jane Doe <jdoe@example.com>], - q[Jane\"\" Doe <jdoe@example.com>], - q['Jane "Katarina\" \' Doe' <jdoe@example.com>]); - -foreach my $str (@success_list) { - my @expected = map { $_->format } Mail::Address->parse("$str"); - my @actual = Git::parse_mailboxes("$str"); - is_deeply(\@expected, \@actual, qq[same output : $str]); -} - -TODO: { - local $TODO = "known breakage"; - foreach my $str (@known_failure_list) { - my @expected = map { $_->format } Mail::Address->parse("$str"); - my @actual = Git::parse_mailboxes("$str"); - is_deeply(\@expected, \@actual, qq[same output : $str]); - } -} - -my $is_passing = eval { Test::More->is_passing }; -exit($is_passing ? 0 : 1) unless $@ =~ /Can't locate object method/; diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 81869d8913..1da282c415 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -178,6 +178,25 @@ test_expect_success $PREREQ 'cc trailer with various syntax' ' test_cmp expected-cc commandline1 ' +test_expect_success $PREREQ 'setup fake get_maintainer.pl script for cc trailer' " + write_script expected-cc-script.sh <<-EOF + echo 'One Person <one@example.com> (supporter:THIS (FOO/bar))' + echo 'Two Person <two@example.com> (maintainer:THIS THING)' + echo 'Third List <three@example.com> (moderated list:THIS THING (FOO/bar))' + echo '<four@example.com> (moderated list:FOR THING)' + echo 'five@example.com (open list:FOR THING (FOO/bar))' + echo 'six@example.com (open list)' + EOF +" + +test_expect_success $PREREQ 'cc trailer with get_maintainer.pl output' ' + clean_fake_sendmail && + git send-email -1 --to=recipient@example.com \ + --cc-cmd=./expected-cc-script.sh \ + --smtp-server="$(pwd)/fake.sendmail" && + test_cmp expected-cc commandline1 +' + test_expect_success $PREREQ 'setup expect' " cat >expected-show-all-headers <<\EOF 0001-Second.patch @@ -205,6 +224,9 @@ Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING In-Reply-To: <unique-message-id@example.com> References: <unique-message-id@example.com> +Reply-To: Reply <reply@example.com> +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF @@ -297,6 +319,7 @@ test_expect_success $PREREQ 'Show all headers' ' --dry-run \ --suppress-cc=sob \ --from="Example <from@example.com>" \ + --reply-to="Reply <reply@example.com>" \ --to=to@example.com \ --cc=cc@example.com \ --bcc=bcc@example.com \ @@ -394,6 +417,7 @@ test_expect_success $PREREQ 'reject long lines' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server="$(pwd)/fake.sendmail" \ + --transfer-encoding=8bit \ $patches longline.patch \ 2>errors && grep longline.patch errors @@ -435,6 +459,42 @@ test_expect_success $PREREQ 'allow long lines with --no-validate' ' 2>errors ' +test_expect_success $PREREQ 'short lines with auto encoding are 8bit' ' + clean_fake_sendmail && + git send-email \ + --from="A <author@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + --transfer-encoding=auto \ + $patches && + grep "Content-Transfer-Encoding: 8bit" msgtxt1 +' + +test_expect_success $PREREQ 'long lines with auto encoding are quoted-printable' ' + clean_fake_sendmail && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + --transfer-encoding=auto \ + --no-validate \ + longline.patch && + grep "Content-Transfer-Encoding: quoted-printable" msgtxt1 +' + +for enc in auto quoted-printable base64 +do + test_expect_success $PREREQ "--validate passes with encoding $enc" ' + git send-email \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + --transfer-encoding=$enc \ + --validate \ + $patches longline.patch + ' +done + test_expect_success $PREREQ 'Invalid In-Reply-To' ' clean_fake_sendmail && git send-email \ @@ -552,6 +612,8 @@ Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF @@ -596,6 +658,8 @@ Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF @@ -631,6 +695,8 @@ Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF @@ -657,6 +723,8 @@ Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF @@ -691,6 +759,8 @@ Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF @@ -722,6 +792,8 @@ Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF @@ -753,6 +825,8 @@ Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF @@ -788,6 +862,8 @@ Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF @@ -816,6 +892,8 @@ Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING X-Mailer: X-MAILER-STRING +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit Result: OK EOF diff --git a/t/t9004-example.sh b/t/t9004-example.sh index b28a028f55..7e8894a4a7 100755 --- a/t/t9004-example.sh +++ b/t/t9004-example.sh @@ -4,7 +4,7 @@ test_description='check that example code compiles and runs' . ./test-lib.sh test_expect_success 'decorate' ' - test-example-decorate + test-tool example-decorate ' test_done diff --git a/t/t9010-svn-fe.sh b/t/t9010-svn-fe.sh index 8eaaca6f99..0b20b07e68 100755 --- a/t/t9010-svn-fe.sh +++ b/t/t9010-svn-fe.sh @@ -473,7 +473,7 @@ test_expect_failure 'change file mode but keep old content' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && git show HEAD:greeting >actual.blob && git show HEAD^:greeting >actual.target && @@ -573,7 +573,7 @@ test_expect_success 'NUL in log message, file content, and property name' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && { git cat-file commit HEAD | nul_to_q && @@ -659,7 +659,7 @@ test_expect_success 'change file mode and reiterate content' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && git show HEAD:greeting >actual.blob && git show HEAD^:greeting >actual.target && @@ -792,7 +792,7 @@ test_expect_success 'property deltas supported' ' { git rev-list HEAD | git diff-tree --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual ' @@ -846,7 +846,7 @@ test_expect_success 'properties on /' ' { git rev-list HEAD | git diff-tree --root --always --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual ' @@ -931,7 +931,7 @@ test_expect_success 'deltas for typechange' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual ' @@ -1030,7 +1030,7 @@ test_expect_success 'deltas need not consume the whole preimage' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual && git show HEAD:postimage >actual.3 && diff --git a/t/t9100-git-svn-basic.sh b/t/t9100-git-svn-basic.sh index 8a8ba65a2a..c937330a5f 100755 --- a/t/t9100-git-svn-basic.sh +++ b/t/t9100-git-svn-basic.sh @@ -288,12 +288,12 @@ test_expect_success 'able to dcommit to a subdirectory' ' test_expect_success 'dcommit should not fail with a touched file' ' test_commit "commit-new-file-foo2" foo2 && - test-chmtime =-60 foo && + test-tool chmtime =-60 foo && git svn dcommit ' test_expect_success 'rebase should not fail with a touched file' ' - test-chmtime =-60 foo && + test-tool chmtime =-60 foo && git svn rebase ' diff --git a/t/t9104-git-svn-follow-parent.sh b/t/t9104-git-svn-follow-parent.sh index cd480edf16..5e0ad19177 100755 --- a/t/t9104-git-svn-follow-parent.sh +++ b/t/t9104-git-svn-follow-parent.sh @@ -33,8 +33,8 @@ test_expect_success 'init and fetch a moved directory' ' git svn fetch -i thunk && test "$(git rev-parse --verify refs/remotes/thunk@2)" \ = "$(git rev-parse --verify refs/remotes/thunk~1)" && - test "$(git cat-file blob refs/remotes/thunk:readme |\ - sed -n -e "3p")" = goodbye && + git cat-file blob refs/remotes/thunk:readme >actual && + test "$(sed -n -e "3p" actual)" = goodbye && test -z "$(git config --get svn-remote.svn.fetch \ "^trunk:refs/remotes/thunk@2$")" ' @@ -48,8 +48,8 @@ test_expect_success 'init and fetch from one svn-remote' ' git svn fetch -i svn/thunk && test "$(git rev-parse --verify refs/remotes/svn/trunk)" \ = "$(git rev-parse --verify refs/remotes/svn/thunk~1)" && - test "$(git cat-file blob refs/remotes/svn/thunk:readme |\ - sed -n -e "3p")" = goodbye + git cat-file blob refs/remotes/svn/thunk:readme >actual && + test "$(sed -n -e "3p" actual)" = goodbye ' test_expect_success 'follow deleted parent' ' @@ -107,7 +107,8 @@ test_expect_success 'follow deleted directory' ' git svn init --minimize-url -i glob "$svnrepo"/glob && git svn fetch -i glob && test "$(git cat-file blob refs/remotes/glob:blob/bye)" = hi && - test "$(git ls-tree refs/remotes/glob | wc -l )" -eq 1 + git ls-tree refs/remotes/glob >actual && + test_line_count = 1 actual ' # ref: r9270 of the Subversion repository: (http://svn.collab.net/repos/svn) @@ -204,8 +205,9 @@ test_expect_success "follow-parent is atomic" ' test_expect_success "track multi-parent paths" ' svn_cmd cp -m "resurrect /glob" "$svnrepo"/r9270 "$svnrepo"/glob && git svn multi-fetch && - test $(git cat-file commit refs/remotes/glob | \ - grep "^parent " | wc -l) -eq 2 + git cat-file commit refs/remotes/glob >actual && + grep "^parent " actual >actual2 && + test_line_count = 2 actual2 ' test_expect_success "multi-fetch continues to work" " @@ -213,7 +215,10 @@ test_expect_success "multi-fetch continues to work" " " test_expect_success "multi-fetch works off a 'clean' repository" ' - rm -r "$GIT_DIR/svn" "$GIT_DIR/refs/remotes" "$GIT_DIR/logs" && + rm -rf "$GIT_DIR/svn" && + git for-each-ref --format="option no-deref%0adelete %(refname)" refs/remotes | + git update-ref --stdin && + git reflog expire --all --expire=all && mkdir "$GIT_DIR/svn" && git svn multi-fetch ' diff --git a/t/t9108-git-svn-glob.sh b/t/t9108-git-svn-glob.sh index a94286c8ec..6990f64364 100755 --- a/t/t9108-git-svn-glob.sh +++ b/t/t9108-git-svn-glob.sh @@ -47,8 +47,8 @@ test_expect_success 'test refspec globbing' ' git config --add svn-remote.svn.tags\ "tags/*/src/a:refs/remotes/tags/*" && git svn multi-fetch && - git log --pretty=oneline refs/remotes/tags/end | \ - sed -e "s/^.\{41\}//" > output.end && + git log --pretty=oneline refs/remotes/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.end && test_cmp expect.end output.end && test "$(git rev-parse refs/remotes/tags/end~1)" = \ "$(git rev-parse refs/remotes/branches/start)" && @@ -75,14 +75,16 @@ test_expect_success 'test left-hand-side only globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test $(git rev-list refs/remotes/two/tags/end | wc -l) -eq 6 && - test $(git rev-list refs/remotes/two/branches/start | wc -l) -eq 3 && + git rev-list refs/remotes/two/tags/end >actual && + test_line_count = 6 actual && + git rev-list refs/remotes/two/branches/start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/two/branches/start~2) = \ $(git rev-parse refs/remotes/two/trunk) && test $(git rev-parse refs/remotes/two/tags/end~3) = \ $(git rev-parse refs/remotes/two/branches/start) && - git log --pretty=oneline refs/remotes/two/tags/end | \ - sed -e "s/^.\{41\}//" > output.two && + git log --pretty=oneline refs/remotes/two/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.two && test_cmp expect.two output.two ' diff --git a/t/t9109-git-svn-multi-glob.sh b/t/t9109-git-svn-multi-glob.sh index 8d99e848d4..c1e7542a37 100755 --- a/t/t9109-git-svn-multi-glob.sh +++ b/t/t9109-git-svn-multi-glob.sh @@ -47,8 +47,8 @@ test_expect_success 'test refspec globbing' ' git config --add svn-remote.svn.tags\ "tags/*/src/a:refs/remotes/tags/*" && git svn multi-fetch && - git log --pretty=oneline refs/remotes/tags/end | \ - sed -e "s/^.\{41\}//" > output.end && + git log --pretty=oneline refs/remotes/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.end && test_cmp expect.end output.end && test "$(git rev-parse refs/remotes/tags/end~1)" = \ "$(git rev-parse refs/remotes/branches/v1/start)" && @@ -75,14 +75,16 @@ test_expect_success 'test left-hand-side only globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test $(git rev-list refs/remotes/two/tags/end | wc -l) -eq 6 && - test $(git rev-list refs/remotes/two/branches/v1/start | wc -l) -eq 3 && + git rev-list refs/remotes/two/tags/end >actual && + test_line_count = 6 actual && + git rev-list refs/remotes/two/branches/v1/start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/two/branches/v1/start~2) = \ $(git rev-parse refs/remotes/two/trunk) && test $(git rev-parse refs/remotes/two/tags/end~3) = \ $(git rev-parse refs/remotes/two/branches/v1/start) && - git log --pretty=oneline refs/remotes/two/tags/end | \ - sed -e "s/^.\{41\}//" > output.two && + git log --pretty=oneline refs/remotes/two/tags/end >actual && + sed -e "s/^.\{41\}//" actual >output.two && test_cmp expect.two output.two ' cat > expect.four <<EOF @@ -124,14 +126,16 @@ test_expect_success 'test another branch' ' git config --add svn-remote.four.tags \ "tags/*:refs/remotes/four/tags/*" && git svn fetch four && - test $(git rev-list refs/remotes/four/tags/next | wc -l) -eq 5 && - test $(git rev-list refs/remotes/four/branches/v2/start | wc -l) -eq 3 && + git rev-list refs/remotes/four/tags/next >actual && + test_line_count = 5 actual && + git rev-list refs/remotes/four/branches/v2/start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/four/branches/v2/start~2) = \ $(git rev-parse refs/remotes/four/trunk) && test $(git rev-parse refs/remotes/four/tags/next~2) = \ $(git rev-parse refs/remotes/four/branches/v2/start) && - git log --pretty=oneline refs/remotes/four/tags/next | \ - sed -e "s/^.\{41\}//" > output.four && + git log --pretty=oneline refs/remotes/four/tags/next >actual && + sed -e "s/^.\{41\}//" actual >output.four && test_cmp expect.four output.four ' diff --git a/t/t9110-git-svn-use-svm-props.sh b/t/t9110-git-svn-use-svm-props.sh index dde0a3c222..ad37d980c9 100755 --- a/t/t9110-git-svn-use-svm-props.sh +++ b/t/t9110-git-svn-use-svm-props.sh @@ -21,37 +21,37 @@ uuid=161ce429-a9dd-4828-af4a-52023f968c89 bar_url=http://mayonaise/svnrepo/bar test_expect_success 'verify metadata for /bar' " - git cat-file commit refs/remotes/bar | \ - grep '^git-svn-id: $bar_url@12 $uuid$' && - git cat-file commit refs/remotes/bar~1 | \ - grep '^git-svn-id: $bar_url@11 $uuid$' && - git cat-file commit refs/remotes/bar~2 | \ - grep '^git-svn-id: $bar_url@10 $uuid$' && - git cat-file commit refs/remotes/bar~3 | \ - grep '^git-svn-id: $bar_url@9 $uuid$' && - git cat-file commit refs/remotes/bar~4 | \ - grep '^git-svn-id: $bar_url@6 $uuid$' && - git cat-file commit refs/remotes/bar~5 | \ - grep '^git-svn-id: $bar_url@1 $uuid$' + git cat-file commit refs/remotes/bar >actual && + grep '^git-svn-id: $bar_url@12 $uuid$' actual && + git cat-file commit refs/remotes/bar~1 >actual && + grep '^git-svn-id: $bar_url@11 $uuid$' actual && + git cat-file commit refs/remotes/bar~2 >actual && + grep '^git-svn-id: $bar_url@10 $uuid$' actual && + git cat-file commit refs/remotes/bar~3 >actual && + grep '^git-svn-id: $bar_url@9 $uuid$' actual && + git cat-file commit refs/remotes/bar~4 >actual && + grep '^git-svn-id: $bar_url@6 $uuid$' actual && + git cat-file commit refs/remotes/bar~5 >actual && + grep '^git-svn-id: $bar_url@1 $uuid$' actual " e_url=http://mayonaise/svnrepo/dir/a/b/c/d/e test_expect_success 'verify metadata for /dir/a/b/c/d/e' " - git cat-file commit refs/remotes/e | \ - grep '^git-svn-id: $e_url@1 $uuid$' + git cat-file commit refs/remotes/e >actual && + grep '^git-svn-id: $e_url@1 $uuid$' actual " dir_url=http://mayonaise/svnrepo/dir test_expect_success 'verify metadata for /dir' " - git cat-file commit refs/remotes/dir | \ - grep '^git-svn-id: $dir_url@2 $uuid$' && - git cat-file commit refs/remotes/dir~1 | \ - grep '^git-svn-id: $dir_url@1 $uuid$' + git cat-file commit refs/remotes/dir >actual && + grep '^git-svn-id: $dir_url@2 $uuid$' actual && + git cat-file commit refs/remotes/dir~1 >actual && + grep '^git-svn-id: $dir_url@1 $uuid$' actual " test_expect_success 'find commit based on SVN revision number' " - git svn find-rev r12 | - grep $(git rev-parse HEAD) + git svn find-rev r12 >actual && + grep $(git rev-parse HEAD) actual " test_expect_success 'empty rebase' " diff --git a/t/t9111-git-svn-use-svnsync-props.sh b/t/t9111-git-svn-use-svnsync-props.sh index 22b6e5ee7d..6c93073551 100755 --- a/t/t9111-git-svn-use-svnsync-props.sh +++ b/t/t9111-git-svn-use-svnsync-props.sh @@ -20,32 +20,32 @@ uuid=161ce429-a9dd-4828-af4a-52023f968c89 bar_url=http://mayonaise/svnrepo/bar test_expect_success 'verify metadata for /bar' " - git cat-file commit refs/remotes/bar | \ - grep '^git-svn-id: $bar_url@12 $uuid$' && - git cat-file commit refs/remotes/bar~1 | \ - grep '^git-svn-id: $bar_url@11 $uuid$' && - git cat-file commit refs/remotes/bar~2 | \ - grep '^git-svn-id: $bar_url@10 $uuid$' && - git cat-file commit refs/remotes/bar~3 | \ - grep '^git-svn-id: $bar_url@9 $uuid$' && - git cat-file commit refs/remotes/bar~4 | \ - grep '^git-svn-id: $bar_url@6 $uuid$' && - git cat-file commit refs/remotes/bar~5 | \ - grep '^git-svn-id: $bar_url@1 $uuid$' + git cat-file commit refs/remotes/bar >actual && + grep '^git-svn-id: $bar_url@12 $uuid$' actual && + git cat-file commit refs/remotes/bar~1 >actual && + grep '^git-svn-id: $bar_url@11 $uuid$' actual && + git cat-file commit refs/remotes/bar~2 >actual && + grep '^git-svn-id: $bar_url@10 $uuid$' actual && + git cat-file commit refs/remotes/bar~3 >actual && + grep '^git-svn-id: $bar_url@9 $uuid$' actual && + git cat-file commit refs/remotes/bar~4 >actual && + grep '^git-svn-id: $bar_url@6 $uuid$' actual && + git cat-file commit refs/remotes/bar~5 >actual && + grep '^git-svn-id: $bar_url@1 $uuid$' actual " e_url=http://mayonaise/svnrepo/dir/a/b/c/d/e test_expect_success 'verify metadata for /dir/a/b/c/d/e' " - git cat-file commit refs/remotes/e | \ - grep '^git-svn-id: $e_url@1 $uuid$' + git cat-file commit refs/remotes/e >actual && + grep '^git-svn-id: $e_url@1 $uuid$' actual " dir_url=http://mayonaise/svnrepo/dir test_expect_success 'verify metadata for /dir' " - git cat-file commit refs/remotes/dir | \ - grep '^git-svn-id: $dir_url@2 $uuid$' && - git cat-file commit refs/remotes/dir~1 | \ - grep '^git-svn-id: $dir_url@1 $uuid$' + git cat-file commit refs/remotes/dir >actual && + grep '^git-svn-id: $dir_url@2 $uuid$' actual && + git cat-file commit refs/remotes/dir~1 >actual && + grep '^git-svn-id: $dir_url@1 $uuid$' actual " test_done diff --git a/t/t9114-git-svn-dcommit-merge.sh b/t/t9114-git-svn-dcommit-merge.sh index 50bca62def..32317d6bca 100755 --- a/t/t9114-git-svn-dcommit-merge.sh +++ b/t/t9114-git-svn-dcommit-merge.sh @@ -68,7 +68,8 @@ test_debug 'gitk --all & sleep 1' test_expect_success 'verify pre-merge ancestry' " test x\$(git rev-parse --verify refs/heads/svn^2) = \ x\$(git rev-parse --verify refs/heads/merge) && - git cat-file commit refs/heads/svn^ | grep '^friend$' + git cat-file commit refs/heads/svn^ >actual && + grep '^friend$' actual " test_expect_success 'git svn dcommit merges' " @@ -82,12 +83,13 @@ test_expect_success 'verify post-merge ancestry' " x\$(git rev-parse --verify refs/remotes/origin/trunk) && test x\$(git rev-parse --verify refs/heads/svn^2) = \ x\$(git rev-parse --verify refs/heads/merge) && - git cat-file commit refs/heads/svn^ | grep '^friend$' + git cat-file commit refs/heads/svn^ >actual && + grep '^friend$' actual " test_expect_success 'verify merge commit message' " - git rev-list --pretty=raw -1 refs/heads/svn | \ - grep \" Merge branch 'merge' into svn\" + git rev-list --pretty=raw -1 refs/heads/svn >actual && + grep \" Merge branch 'merge' into svn\" actual " test_done diff --git a/t/t9130-git-svn-authors-file.sh b/t/t9130-git-svn-authors-file.sh index 41264818cc..d8262854bb 100755 --- a/t/t9130-git-svn-authors-file.sh +++ b/t/t9130-git-svn-authors-file.sh @@ -26,11 +26,12 @@ test_expect_success 'start import with incomplete authors file' ' test_expect_success 'imported 2 revisions successfully' ' ( cd x - test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 2 && - git rev-list -1 --pretty=raw refs/remotes/git-svn | \ - grep "^author BBBBBBB BBBBBBB <bb@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ - grep "^author AAAAAAA AAAAAAA <aa@example\.com> " + git rev-list refs/remotes/git-svn >actual && + test_line_count = 2 actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author BBBBBBB BBBBBBB <bb@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~1 >actual && + grep "^author AAAAAAA AAAAAAA <aa@example\.com> " actual ) ' @@ -43,11 +44,12 @@ test_expect_success 'continues to import once authors have been added' ' ( cd x git svn fetch --authors-file=../svn-authors && - test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 4 && - git rev-list -1 --pretty=raw refs/remotes/git-svn | \ - grep "^author DDDDDDD DDDDDDD <dd@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ - grep "^author CCCCCCC CCCCCCC <cc@example\.com> " + git rev-list refs/remotes/git-svn >actual && + test_line_count = 4 actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author DDDDDDD DDDDDDD <dd@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~1 >actual && + grep "^author CCCCCCC CCCCCCC <cc@example\.com> " actual ) ' @@ -102,12 +104,28 @@ test_expect_success !MINGW 'fresh clone with svn.authors-file in config' ' test x"$HOME"/svn-authors = x"$(git config svn.authorsfile)" && git svn clone "$svnrepo" gitconfig.clone && cd gitconfig.clone && - nr_ex=$(git log | grep "^Author:.*example.com" | wc -l) && - nr_rev=$(git rev-list HEAD | wc -l) && + git log >actual && + nr_ex=$(grep "^Author:.*example.com" actual | wc -l) && + git rev-list HEAD >actual && + nr_rev=$(wc -l <actual) && test $nr_rev -eq $nr_ex ) ' +cat >> svn-authors <<EOF +ff = FFFFFFF FFFFFFF <> +EOF + +test_expect_success 'authors-file imported user without email' ' + svn_cmd mkdir -m aa/branches/ff --username ff "$svnrepo/aa/branches/ff" && + ( + cd aa-work && + git svn fetch --authors-file=../svn-authors && + git rev-list -1 --pretty=raw refs/remotes/origin/ff | \ + grep "^author FFFFFFF FFFFFFF <> " + ) + ' + test_debug 'GIT_DIR=gitconfig.clone/.git git log' test_done diff --git a/t/t9138-git-svn-authors-prog.sh b/t/t9138-git-svn-authors-prog.sh index 7d7e9d46bc..93ef44fae8 100755 --- a/t/t9138-git-svn-authors-prog.sh +++ b/t/t9138-git-svn-authors-prog.sh @@ -9,7 +9,9 @@ test_description='git svn authors prog tests' write_script svn-authors-prog "$PERL_PATH" <<-\EOF $_ = shift; - if (s/-sub$//) { + if (s/-hermit//) { + print "$_ <>\n"; + } elsif (s/-sub$//) { print "$_ <$_\@sub.example.com>\n"; } else { print "$_ <$_\@example.com>\n"; @@ -37,44 +39,67 @@ test_expect_success 'import authors with prog and file' ' test_expect_success 'imported 6 revisions successfully' ' ( cd x - test "$(git rev-list refs/remotes/git-svn | wc -l)" -eq 6 + git rev-list refs/remotes/git-svn >actual && + test_line_count = 6 actual ) ' test_expect_success 'authors-prog ran correctly' ' ( cd x - git rev-list -1 --pretty=raw refs/remotes/git-svn~1 | \ - grep "^author ee-foo <ee-foo@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~2 | \ - grep "^author dd <dd@sub\.example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~3 | \ - grep "^author cc <cc@sub\.example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~4 | \ - grep "^author bb <bb@example\.com> " && - git rev-list -1 --pretty=raw refs/remotes/git-svn~5 | \ - grep "^author aa <aa@example\.com> " + git rev-list -1 --pretty=raw refs/remotes/git-svn~1 >actual && + grep "^author ee-foo <ee-foo@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~2 >actual && + grep "^author dd <dd@sub\.example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~3 >actual && + grep "^author cc <cc@sub\.example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~4 >actual && + grep "^author bb <bb@example\.com> " actual && + git rev-list -1 --pretty=raw refs/remotes/git-svn~5 >actual && + grep "^author aa <aa@example\.com> " actual ) ' test_expect_success 'authors-file overrode authors-prog' ' ( cd x - git rev-list -1 --pretty=raw refs/remotes/git-svn | \ - grep "^author FFFFFFF FFFFFFF <fFf@other\.example\.com> " + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author FFFFFFF FFFFFFF <fFf@other\.example\.com> " actual ) ' git --git-dir=x/.git config --unset svn.authorsfile git --git-dir=x/.git config --unset svn.authorsprog +test_expect_success 'authors-prog imported user without email' ' + svn mkdir -m gg --username gg-hermit "$svnrepo"/gg && + ( + cd x && + git svn fetch --authors-prog=../svn-authors-prog && + git rev-list -1 --pretty=raw refs/remotes/git-svn | \ + grep "^author gg <> " + ) +' + +test_expect_success 'imported without authors-prog and authors-file' ' + svn mkdir -m hh --username hh "$svnrepo"/hh && + ( + uuid=$(svn info "$svnrepo" | + sed -n "s/^Repository UUID: //p") && + cd x && + git svn fetch && + git rev-list -1 --pretty=raw refs/remotes/git-svn | \ + grep "^author hh <hh@$uuid> " + ) +' + test_expect_success 'authors-prog handled special characters in username' ' svn mkdir -m bad --username "xyz; touch evil" "$svnrepo"/bad && ( cd x && git svn --authors-prog=../svn-authors-prog fetch && - git rev-list -1 --pretty=raw refs/remotes/git-svn | - grep "^author xyz; touch evil <xyz; touch evil@example\.com> " && + git rev-list -1 --pretty=raw refs/remotes/git-svn >actual && + grep "^author xyz; touch evil <xyz; touch evil@example\.com> " actual && ! test -f evil ) ' diff --git a/t/t9153-git-svn-rewrite-uuid.sh b/t/t9153-git-svn-rewrite-uuid.sh index 372ef15685..8cb2b5c69c 100755 --- a/t/t9153-git-svn-rewrite-uuid.sh +++ b/t/t9153-git-svn-rewrite-uuid.sh @@ -16,10 +16,10 @@ test_expect_success 'load svn repo' " " test_expect_success 'verify uuid' " - git cat-file commit refs/remotes/git-svn~0 | \ - grep '^git-svn-id: .*@2 $uuid$' && - git cat-file commit refs/remotes/git-svn~1 | \ - grep '^git-svn-id: .*@1 $uuid$' + git cat-file commit refs/remotes/git-svn~0 >actual && + grep '^git-svn-id: .*@2 $uuid$' actual && + git cat-file commit refs/remotes/git-svn~1 >actual && + grep '^git-svn-id: .*@1 $uuid$' actual " test_done diff --git a/t/t9168-git-svn-partially-globbed-names.sh b/t/t9168-git-svn-partially-globbed-names.sh index 8b22f2272c..bdf6e84999 100755 --- a/t/t9168-git-svn-partially-globbed-names.sh +++ b/t/t9168-git-svn-partially-globbed-names.sh @@ -48,8 +48,8 @@ test_expect_success 'test refspec prefixed globbing' ' git config --add svn-remote.svn.tags\ "tags/t_*/src/a:refs/remotes/tags/t_*" && git svn multi-fetch && - git log --pretty=oneline refs/remotes/tags/t_end | \ - sed -e "s/^.\{41\}//" >output.end && + git log --pretty=oneline refs/remotes/tags/t_end >actual && + sed -e "s/^.\{41\}//" actual >output.end && test_cmp expect.end output.end && test "$(git rev-parse refs/remotes/tags/t_end~1)" = \ "$(git rev-parse refs/remotes/branches/b_start)" && @@ -78,14 +78,16 @@ test_expect_success 'test left-hand-side only prefixed globbing' ' svn_cmd commit -m "try to try" ) && git svn fetch two && - test $(git rev-list refs/remotes/two/tags/t_end | wc -l) -eq 6 && - test $(git rev-list refs/remotes/two/branches/b_start | wc -l) -eq 3 && + git rev-list refs/remotes/two/tags/t_end >actual && + test_line_count = 6 actual && + git rev-list refs/remotes/two/branches/b_start >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/two/branches/b_start~2) = \ $(git rev-parse refs/remotes/two/trunk) && test $(git rev-parse refs/remotes/two/tags/t_end~3) = \ $(git rev-parse refs/remotes/two/branches/b_start) && - git log --pretty=oneline refs/remotes/two/tags/t_end | \ - sed -e "s/^.\{41\}//" >output.two && + git log --pretty=oneline refs/remotes/two/tags/t_end >actual && + sed -e "s/^.\{41\}//" actual >output.two && test_cmp expect.two output.two ' @@ -118,14 +120,16 @@ test_expect_success 'test prefixed globs match just prefix' ' svn_cmd up ) && git svn fetch three && - test $(git rev-list refs/remotes/three/branches/b_ | wc -l) -eq 2 && - test $(git rev-list refs/remotes/three/tags/t_ | wc -l) -eq 3 && + git rev-list refs/remotes/three/branches/b_ >actual && + test_line_count = 2 actual && + git rev-list refs/remotes/three/tags/t_ >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/three/branches/b_~1) = \ $(git rev-parse refs/remotes/three/trunk) && test $(git rev-parse refs/remotes/three/tags/t_~1) = \ $(git rev-parse refs/remotes/three/branches/b_) && - git log --pretty=oneline refs/remotes/three/tags/t_ | \ - sed -e "s/^.\{41\}//" >output.three && + git log --pretty=oneline refs/remotes/three/tags/t_ >actual && + sed -e "s/^.\{41\}//" actual >output.three && test_cmp expect.three output.three ' @@ -186,14 +190,16 @@ test_expect_success 'test globbing in the middle of the word' ' svn_cmd up ) && git svn fetch five && - test $(git rev-list refs/remotes/five/branches/abcde | wc -l) -eq 2 && - test $(git rev-list refs/remotes/five/tags/fghij | wc -l) -eq 3 && + git rev-list refs/remotes/five/branches/abcde >actual && + test_line_count = 2 actual && + git rev-list refs/remotes/five/tags/fghij >actual && + test_line_count = 3 actual && test $(git rev-parse refs/remotes/five/branches/abcde~1) = \ $(git rev-parse refs/remotes/five/trunk) && test $(git rev-parse refs/remotes/five/tags/fghij~1) = \ $(git rev-parse refs/remotes/five/branches/abcde) && - git log --pretty=oneline refs/remotes/five/tags/fghij | \ - sed -e "s/^.\{41\}//" >output.five && + git log --pretty=oneline refs/remotes/five/tags/fghij >actual && + sed -e "s/^.\{41\}//" actual >output.five && test_cmp expect.five output.five ' diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index e4d06accc4..9e7f96223d 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -1185,7 +1185,7 @@ test_expect_success PIPE 'N: empty directory reads as missing' ' test_cmp expect.response response && git rev-list read-empty | git diff-tree -r --root --stdin | - sed "s/$_x40/OBJNAME/g" >actual && + sed "s/$OID_REGEX/OBJNAME/g" >actual && test_cmp expect actual ' @@ -1271,7 +1271,7 @@ test_expect_success 'N: delete directory by copying' ' git fast-import <input && git rev-list N-delete | git diff-tree -r --stdin --root --always | - sed -e "s/$_x40/OBJID/g" >actual && + sed -e "s/$OID_REGEX/OBJID/g" >actual && test_cmp expect actual ' @@ -2602,7 +2602,7 @@ test_expect_success 'R: terminating "done" within commit' ' EOF git rev-list done-ends | git diff-tree -r --stdin --root --always | - sed -e "s/$_x40/OBJID/g" >actual && + sed -e "s/$OID_REGEX/OBJID/g" >actual && test_cmp expect actual ' @@ -2654,7 +2654,7 @@ test_expect_success 'R: corrupt lines do not mess marks file' ' ## test_expect_success 'R: blob bigger than threshold' ' blobsize=$((2*1024*1024 + 53)) && - test-genrandom bar $blobsize >expect && + test-tool genrandom bar $blobsize >expect && cat >input <<-INPUT_END && commit refs/heads/big-file committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 866ddf6058..6a392e87bc 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -43,20 +43,20 @@ test_expect_success 'fast-export | fast-import' ' MUSS=$(git rev-parse --verify muss) && mkdir new && git --git-dir=new/.git init && - git fast-export --all | + git fast-export --all >actual && (cd new && git fast-import && test $MASTER = $(git rev-parse --verify refs/heads/master) && test $REIN = $(git rev-parse --verify refs/tags/rein) && test $WER = $(git rev-parse --verify refs/heads/wer) && - test $MUSS = $(git rev-parse --verify refs/tags/muss)) + test $MUSS = $(git rev-parse --verify refs/tags/muss)) <actual ' test_expect_success 'fast-export master~2..master' ' - git fast-export master~2..master | - sed "s/master/partial/" | + git fast-export master~2..master >actual && + sed "s/master/partial/" actual | (cd new && git fast-import && test $MASTER != $(git rev-parse --verify refs/heads/partial) && @@ -74,11 +74,12 @@ test_expect_success 'iso-8859-1' ' test_tick && echo rosten >file && git commit -s -m den file && - git fast-export wer^..wer | - sed "s/wer/i18n/" | + git fast-export wer^..wer >iso8859-1.fi && + sed "s/wer/i18n/" iso8859-1.fi | (cd new && git fast-import && - git cat-file commit i18n | grep "Áéí óú") + git cat-file commit i18n >actual && + grep "Áéí óú" actual) ' test_expect_success 'import/export-marks' ' @@ -87,20 +88,14 @@ test_expect_success 'import/export-marks' ' git fast-export --export-marks=tmp-marks HEAD && test -s tmp-marks && test_line_count = 3 tmp-marks && - test $( - git fast-export --import-marks=tmp-marks\ - --export-marks=tmp-marks HEAD | - grep ^commit | - wc -l) \ - -eq 0 && + git fast-export --import-marks=tmp-marks \ + --export-marks=tmp-marks HEAD >actual && + test $(grep ^commit actual | wc -l) -eq 0 && echo change > file && git commit -m "last commit" file && - test $( - git fast-export --import-marks=tmp-marks \ - --export-marks=tmp-marks HEAD | - grep ^commit\ | - wc -l) \ - -eq 1 && + git fast-export --import-marks=tmp-marks \ + --export-marks=tmp-marks HEAD >actual && + test $(grep ^commit\ actual | wc -l) -eq 1 && test_line_count = 4 tmp-marks ' @@ -184,7 +179,7 @@ test_expect_success 'submodule fast-export | fast-import' ' rm -rf new && mkdir new && git --git-dir=new/.git init && - git fast-export --signed-tags=strip --all | + git fast-export --signed-tags=strip --all >actual && (cd new && git fast-import && test "$SUBENT1" = "$(git ls-tree refs/heads/master^ sub)" && @@ -192,7 +187,7 @@ test_expect_success 'submodule fast-export | fast-import' ' git checkout master && git submodule init && git submodule update && - cmp sub/file ../sub/file) + cmp sub/file ../sub/file) <actual ' @@ -367,12 +362,14 @@ test_expect_success 'path limiting with import-marks does not lose unmodified fi echo more content >> file && test_tick && git commit -mnext file && - git fast-export --import-marks=marks simple -- file file0 | grep file0 + git fast-export --import-marks=marks simple -- file file0 >actual && + grep file0 actual ' test_expect_success 'full-tree re-shows unmodified files' ' git checkout -f simple && - test $(git fast-export --full-tree simple | grep -c file0) -eq 3 + git fast-export --full-tree simple >actual && + test $(grep -c file0 actual) -eq 3 ' test_expect_success 'set-up a few more tags for tag export tests' ' @@ -505,8 +502,8 @@ test_expect_success 'refs are updated even if no commits need to be exported' ' ' test_expect_success 'use refspec' ' - git fast-export --refspec refs/heads/master:refs/heads/foobar master | \ - grep "^commit " | sort | uniq > actual && + git fast-export --refspec refs/heads/master:refs/heads/foobar master >actual2 && + grep "^commit " actual2 | sort | uniq >actual && echo "commit refs/heads/foobar" > expected && test_cmp expected actual ' @@ -534,10 +531,29 @@ test_expect_success 'when using -C, do not declare copy when source of copy is a git -C src commit -m 2nd_commit && test_create_repo dst && - git -C src fast-export --all -C | git -C dst fast-import && + git -C src fast-export --all -C >actual && + git -C dst fast-import <actual && git -C src show >expected && git -C dst show >actual && test_cmp expected actual ' +test_expect_success 'merge commit gets exported with --import-marks' ' + test_create_repo merging && + ( + cd merging && + test_commit initial && + git checkout -b topic && + test_commit on-topic && + git checkout master && + test_commit on-master && + test_tick && + git merge --no-ff -m Yeah topic && + + echo ":1 $(git rev-parse HEAD^^)" >marks && + git fast-export --import-marks=marks master >out && + grep Yeah out + ) +' + test_done diff --git a/t/t9400-git-cvsserver-server.sh b/t/t9400-git-cvsserver-server.sh index c30660d606..06742748e9 100755 --- a/t/t9400-git-cvsserver-server.sh +++ b/t/t9400-git-cvsserver-server.sh @@ -447,12 +447,10 @@ test_expect_success 'cvs update (-p)' ' git push gitcvs.git >/dev/null && cd cvswork && GIT_CONFIG="$git_config" cvs update && - rm -f failures && for i in merge no-lf empty really-empty; do - GIT_CONFIG="$git_config" cvs update -p "$i" >$i.out - test_cmp $i.out ../$i >>failures 2>&1 - done && - test -z "$(cat failures)" + GIT_CONFIG="$git_config" cvs update -p "$i" >$i.out && + test_cmp $i.out ../$i || return 1 + done ' cd "$WORKDIR" diff --git a/t/t9402-git-cvsserver-refs.sh b/t/t9402-git-cvsserver-refs.sh index 6d2d3c8739..cf31ace667 100755 --- a/t/t9402-git-cvsserver-refs.sh +++ b/t/t9402-git-cvsserver-refs.sh @@ -455,20 +455,20 @@ test_expect_success 'cvs up -r $(git rev-parse v1)' ' ' test_expect_success 'cvs diff -r v1 -u' ' - ( cd cvswork && cvs -f diff -r v1 -u ) >cvsDiff.out 2>cvs.log && + ( cd cvswork && cvs -f diff -r v1 -u >../cvsDiff.out 2>../cvs.log ) && test_must_be_empty cvsDiff.out && test_must_be_empty cvs.log ' test_expect_success 'cvs diff -N -r v2 -u' ' - ( cd cvswork && ! cvs -f diff -N -r v2 -u ) >cvsDiff.out 2>cvs.log && + ( cd cvswork && ! cvs -f diff -N -r v2 -u >../cvsDiff.out 2>../cvs.log ) && test_must_be_empty cvs.log && test -s cvsDiff.out && check_diff cvsDiff.out v2 v1 >check_diff.out 2>&1 ' test_expect_success 'cvs diff -N -r v2 -r v1.2' ' - ( cd cvswork && ! cvs -f diff -N -r v2 -r v1.2 -u ) >cvsDiff.out 2>cvs.log && + ( cd cvswork && ! cvs -f diff -N -r v2 -r v1.2 -u >../cvsDiff.out 2>../cvs.log ) && test_must_be_empty cvs.log && test -s cvsDiff.out && check_diff cvsDiff.out v2 v1.2 >check_diff.out 2>&1 @@ -487,7 +487,7 @@ test_expect_success 'apply early [cvswork3] diff to b3' ' ' test_expect_success 'check [cvswork3] diff' ' - ( cd cvswork3 && ! cvs -f diff -N -u ) >"$WORKDIR/cvsDiff.out" 2>cvs.log && + ( cd cvswork3 && ! cvs -f diff -N -u >"$WORKDIR/cvsDiff.out" 2>../cvs.log ) && test_must_be_empty cvs.log && test -s cvsDiff.out && test $(grep Index: cvsDiff.out | wc -l) = 3 && diff --git a/t/t9802-git-p4-filetype.sh b/t/t9802-git-p4-filetype.sh index eb9a8ed197..1fc9b33aeb 100755 --- a/t/t9802-git-p4-filetype.sh +++ b/t/t9802-git-p4-filetype.sh @@ -237,7 +237,7 @@ test_expect_success 'ignore apple' ' build_gendouble && ( cd "$cli" && - test-genrandom apple 1024 >double.png && + test-tool genrandom apple 1024 >double.png && "$PYTHON_PATH" "$TRASH_DIRECTORY/gendouble.py" >%double.png && p4 add -t apple double.png && p4 submit -d appledouble diff --git a/t/t9803-git-p4-shell-metachars.sh b/t/t9803-git-p4-shell-metachars.sh index d950c7d665..d5c3675100 100755 --- a/t/t9803-git-p4-shell-metachars.sh +++ b/t/t9803-git-p4-shell-metachars.sh @@ -28,7 +28,7 @@ test_expect_success 'shell metachars in filenames' ' echo f2 >"file with spaces" && git add "file with spaces" && git commit -m "add files" && - P4EDITOR="test-chmtime +5" git p4 submit + P4EDITOR="test-tool chmtime +5" git p4 submit ) && ( cd "$cli" && @@ -47,7 +47,7 @@ test_expect_success 'deleting with shell metachars' ' git rm foo\$bar && git rm file\ with\ spaces && git commit -m "remove files" && - P4EDITOR="test-chmtime +5" git p4 submit + P4EDITOR="test-tool chmtime +5" git p4 submit ) && ( cd "$cli" && diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 71cae2874d..2325599ee6 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -155,6 +155,46 @@ test_expect_success 'allow submit from branch with same revision but different n ) ' +# make two commits, but tell it to apply only one + +test_expect_success 'submit --commit one' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + test_commit "file9" && + test_commit "file10" && + git config git-p4.skipSubmitEdit true && + git p4 submit --commit HEAD + ) && + ( + cd "$cli" && + test_path_is_missing "file9.t" && + test_path_is_file "file10.t" + ) +' + +# make three commits, but tell it to apply only range + +test_expect_success 'submit --commit range' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + test_commit "file11" && + test_commit "file12" && + test_commit "file13" && + git config git-p4.skipSubmitEdit true && + git p4 submit --commit HEAD~2..HEAD + ) && + ( + cd "$cli" && + test_path_is_missing "file11.t" && + test_path_is_file "file12.t" && + test_path_is_file "file13.t" + ) +' + # # Basic submit tests, the five handled cases # diff --git a/t/t9813-git-p4-preserve-users.sh b/t/t9813-git-p4-preserve-users.sh index bda222aa02..783c6ad165 100755 --- a/t/t9813-git-p4-preserve-users.sh +++ b/t/t9813-git-p4-preserve-users.sh @@ -53,7 +53,7 @@ test_expect_success 'preserve users' ' git commit --author "Alice <alice@example.com>" -m "a change by alice" file1 && git commit --author "Bob <bob@example.com>" -m "a change by bob" file2 && git config git-p4.skipSubmitEditCheck true && - P4EDITOR="test-chmtime +5" P4USER=alice P4PASSWD=secret && + P4EDITOR="test-tool chmtime +5" P4USER=alice P4PASSWD=secret && export P4EDITOR P4USER P4PASSWD && git p4 commit --preserve-user && p4_check_commit_author file1 alice && @@ -71,7 +71,7 @@ test_expect_success 'refuse to preserve users without perms' ' git config git-p4.skipSubmitEditCheck true && echo "username-noperms: a change by alice" >>file1 && git commit --author "Alice <alice@example.com>" -m "perms: a change by alice" file1 && - P4EDITOR="test-chmtime +5" P4USER=bob P4PASSWD=secret && + P4EDITOR="test-tool chmtime +5" P4USER=bob P4PASSWD=secret && export P4EDITOR P4USER P4PASSWD && test_must_fail git p4 commit --preserve-user && ! git diff --exit-code HEAD..p4/master @@ -89,7 +89,7 @@ test_expect_success 'preserve user where author is unknown to p4' ' git commit --author "Bob <bob@example.com>" -m "preserve: a change by bob" file1 && echo "username-unknown: a change by charlie" >>file1 && git commit --author "Charlie <charlie@example.com>" -m "preserve: a change by charlie" file1 && - P4EDITOR="test-chmtime +5" P4USER=alice P4PASSWD=secret && + P4EDITOR="test-tool chmtime +5" P4USER=alice P4PASSWD=secret && export P4EDITOR P4USER P4PASSWD && test_must_fail git p4 commit --preserve-user && ! git diff --exit-code HEAD..p4/master && diff --git a/t/t9818-git-p4-block.sh b/t/t9818-git-p4-block.sh index 8840a183ac..ce7cb22ad3 100755 --- a/t/t9818-git-p4-block.sh +++ b/t/t9818-git-p4-block.sh @@ -129,6 +129,7 @@ test_expect_success 'Create a repo with multiple depot paths' ' ' test_expect_success 'Clone repo with multiple depot paths' ' + test_when_finished cleanup_git && ( cd "$git" && git p4 clone --changes-block-size=4 //depot/pathA@all //depot/pathB@all \ @@ -138,6 +139,13 @@ test_expect_success 'Clone repo with multiple depot paths' ' ) ' +test_expect_success 'Clone repo with self-sizing block size' ' + test_when_finished cleanup_git && + git p4 clone --changes-block-size=1000000 //depot@all --destination="$git" && + git -C "$git" log --oneline >log && + test_line_count \> 10 log +' + test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9820-git-p4-editor-handling.sh b/t/t9820-git-p4-editor-handling.sh index 6dc6df032e..3c22f74bd4 100755 --- a/t/t9820-git-p4-editor-handling.sh +++ b/t/t9820-git-p4-editor-handling.sh @@ -26,7 +26,7 @@ test_expect_success 'EDITOR with options' ' cd "$git" && echo change >file1 && git commit -m "change" file1 && - P4EDITOR=": >\"$git/touched\" && test-chmtime +5" git p4 submit && + P4EDITOR=": >\"$git/touched\" && test-tool chmtime +5" git p4 submit && test_path_is_file "$git/touched" ) ' diff --git a/t/t9832-unshelve.sh b/t/t9832-unshelve.sh new file mode 100755 index 0000000000..48ec7679b8 --- /dev/null +++ b/t/t9832-unshelve.sh @@ -0,0 +1,138 @@ +#!/bin/sh + +last_shelved_change () { + p4 changes -s shelved -m1 | cut -d " " -f 2 +} + +test_description='git p4 unshelve' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'init depot' ' + ( + cd "$cli" && + echo file1 >file1 && + p4 add file1 && + p4 submit -d "change 1" && + : >file_to_delete && + p4 add file_to_delete && + p4 submit -d "file to delete" + ) +' + +test_expect_success 'initial clone' ' + git p4 clone --dest="$git" //depot/@all +' + +test_expect_success 'create shelved changelist' ' + ( + cd "$cli" && + p4 edit file1 && + echo "a change" >>file1 && + echo "new file" >file2 && + p4 add file2 && + p4 delete file_to_delete && + p4 opened && + p4 shelve -i <<EOF +Change: new +Description: + Test commit + + Further description +Files: + //depot/file1 + //depot/file2 + //depot/file_to_delete +EOF + + ) && + ( + cd "$git" && + change=$(last_shelved_change) && + git p4 unshelve $change && + git show refs/remotes/p4/unshelved/$change | grep -q "Further description" && + git cherry-pick refs/remotes/p4/unshelved/$change && + test_path_is_file file2 && + test_cmp file1 "$cli"/file1 && + test_cmp file2 "$cli"/file2 && + test_path_is_missing file_to_delete + ) +' + +test_expect_success 'update shelved changelist and re-unshelve' ' + test_when_finished cleanup_git && + ( + cd "$cli" && + change=$(last_shelved_change) && + echo "file3" >file3 && + p4 add -c $change file3 && + p4 shelve -i -r <<EOF && +Change: $change +Description: + Test commit + + Further description +Files: + //depot/file1 + //depot/file2 + //depot/file3 + //depot/file_to_delete +EOF + p4 describe $change + ) && + ( + cd "$git" && + change=$(last_shelved_change) && + git p4 unshelve $change && + git diff refs/remotes/p4/unshelved/$change.0 refs/remotes/p4/unshelved/$change | grep -q file3 + ) +' + +# This is the tricky case where the shelved changelist base revision doesn't +# match git-p4's idea of the base revision +# +# We will attempt to unshelve a change that is based on a change one commit +# ahead of p4/master + +test_expect_success 'create shelved changelist based on p4 change ahead of p4/master' ' + git p4 clone --dest="$git" //depot/@all && + ( + cd "$cli" && + p4 revert ... && + p4 edit file1 && + echo "foo" >>file1 && + p4 submit -d "change:foo" && + p4 edit file1 && + echo "bar" >>file1 && + p4 shelve -i <<EOF && +Change: new +Description: + Change to be unshelved +Files: + //depot/file1 +EOF + change=$(last_shelved_change) && + p4 describe -S $change | grep -q "Change to be unshelved" + ) +' + +# Now try to unshelve it. git-p4 should refuse to do so. +test_expect_success 'try to unshelve the change' ' + test_when_finished cleanup_git && + ( + change=$(last_shelved_change) && + cd "$git" && + test_must_fail git p4 unshelve $change 2>out.txt && + grep -q "cannot unshelve" out.txt + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9833-errors.sh b/t/t9833-errors.sh new file mode 100755 index 0000000000..277d347012 --- /dev/null +++ b/t/t9833-errors.sh @@ -0,0 +1,80 @@ +#!/bin/sh + +test_description='git p4 errors' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'add p4 files' ' + ( + cd "$cli" && + echo file1 >file1 && + p4 add file1 && + p4 submit -d "file1" + ) +' + +# after this test, the default user requires a password +test_expect_success 'error handling' ' + git p4 clone --dest="$git" //depot@all && + ( + cd "$git" && + P4PORT=: test_must_fail git p4 submit 2>errmsg + ) && + p4 passwd -P newpassword && + ( + P4PASSWD=badpassword && + export P4PASSWD && + test_must_fail git p4 clone //depot/foo 2>errmsg && + grep -q "failure accessing depot.*P4PASSWD" errmsg + ) +' + +test_expect_success 'ticket logged out' ' + P4TICKETS="$cli/tickets" && + echo "newpassword" | p4 login && + ( + cd "$git" && + test_commit "ticket-auth-check" && + p4 logout && + test_must_fail git p4 submit 2>errmsg && + grep -q "failure accessing depot" errmsg + ) +' + +test_expect_success 'create group with short ticket expiry' ' + P4TICKETS="$cli/tickets" && + echo "newpassword" | p4 login && + p4_add_user short_expiry_user && + p4 -u short_expiry_user passwd -P password && + p4 group -i <<-EOF && + Group: testgroup + Timeout: 3 + Users: short_expiry_user + EOF + + p4 users | grep short_expiry_user +' + +test_expect_success 'git operation with expired ticket' ' + P4TICKETS="$cli/tickets" && + P4USER=short_expiry_user && + echo "password" | p4 login && + ( + cd "$git" && + git p4 sync && + sleep 5 && + test_must_fail git p4 sync 2>errmsg && + grep "failure accessing depot" errmsg + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + + +test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index fc614dcbfa..3b3a7b66e4 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -13,7 +13,7 @@ complete () return 0 } -# Be careful when updating this list: +# Be careful when updating these lists: # # (1) The build tree may have build artifact from different branch, or # the user's $PATH may have a random executable that may begin @@ -30,7 +30,8 @@ complete () # completion for "git <TAB>", and a plumbing is excluded. "add", # "filter-branch" and "ls-files" are listed for this. -GIT_TESTING_COMMAND_COMPLETION='add checkout check-attr filter-branch ls-files' +GIT_TESTING_ALL_COMMAND_LIST='add checkout check-attr filter-branch ls-files' +GIT_TESTING_PORCELAIN_COMMAND_LIST='add checkout filter-branch' . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" @@ -84,10 +85,11 @@ test_completion () then printf '%s\n' "$2" >expected else - sed -e 's/Z$//' >expected + sed -e 's/Z$//' |sort >expected fi && run_completion "$1" && - test_cmp expected out + sort out >out_sorted && + test_cmp expected out_sorted } # Test __gitcomp. @@ -179,7 +181,7 @@ test_expect_success '__git_find_repo_path - cwd is a .git directory' ' test_expect_success '__git_find_repo_path - parent is a .git directory' ' echo "$ROOT/.git" >expected && ( - cd .git/refs/heads && + cd .git/objects && __git_find_repo_path && echo "$__git_repo_path" >"$actual" ) && @@ -400,6 +402,46 @@ test_expect_success '__gitdir - remote as argument' ' test_cmp expected "$actual" ' + +test_expect_success '__git_dequote - plain unquoted word' ' + __git_dequote unquoted-word && + verbose test unquoted-word = "$dequoted_word" +' + +# input: b\a\c\k\'\\\"s\l\a\s\h\es +# expected: back'\"slashes +test_expect_success '__git_dequote - backslash escaped' ' + __git_dequote "b\a\c\k\\'\''\\\\\\\"s\l\a\s\h\es" && + verbose test "back'\''\\\"slashes" = "$dequoted_word" +' + +# input: sin'gle\' '"quo'ted +# expected: single\ "quoted +test_expect_success '__git_dequote - single quoted' ' + __git_dequote "'"sin'gle\\\\' '\\\"quo'ted"'" && + verbose test '\''single\ "quoted'\'' = "$dequoted_word" +' + +# input: dou"ble\\" "\"\quot"ed +# expected: double\ "\quoted +test_expect_success '__git_dequote - double quoted' ' + __git_dequote '\''dou"ble\\" "\"\quot"ed'\'' && + verbose test '\''double\ "\quoted'\'' = "$dequoted_word" +' + +# input: 'open single quote +test_expect_success '__git_dequote - open single quote' ' + __git_dequote "'\''open single quote" && + verbose test "open single quote" = "$dequoted_word" +' + +# input: "open double quote +test_expect_success '__git_dequote - open double quote' ' + __git_dequote "\"open double quote" && + verbose test "open double quote" = "$dequoted_word" +' + + test_expect_success '__gitcomp_direct - puts everything into COMPREPLY as-is' ' sed -e "s/Z$//g" >expected <<-EOF && with-trailing-space Z @@ -459,6 +501,42 @@ test_expect_success '__gitcomp - suffix' ' EOF ' +test_expect_success '__gitcomp - ignore optional negative options' ' + test_gitcomp "--" "--abc --def --no-one -- --no-two" <<-\EOF + --abc Z + --def Z + --no-one Z + --no-... Z + EOF +' + +test_expect_success '__gitcomp - ignore/narrow optional negative options' ' + test_gitcomp "--a" "--abc --abcdef --no-one -- --no-two" <<-\EOF + --abc Z + --abcdef Z + EOF +' + +test_expect_success '__gitcomp - ignore/narrow optional negative options' ' + test_gitcomp "--n" "--abc --def --no-one -- --no-two" <<-\EOF + --no-one Z + --no-... Z + EOF +' + +test_expect_success '__gitcomp - expand all negative options' ' + test_gitcomp "--no-" "--abc --def --no-one -- --no-two" <<-\EOF + --no-one Z + --no-two Z + EOF +' + +test_expect_success '__gitcomp - expand/narrow all negative options' ' + test_gitcomp "--no-o" "--abc --def --no-one -- --no-two" <<-\EOF + --no-one Z + EOF +' + test_expect_success '__gitcomp - doesnt fail because of invalid variable name' ' __gitcomp "$invalid_variable_name" ' @@ -1168,6 +1246,124 @@ test_expect_success 'teardown after ref completion' ' git remote remove other ' + +test_path_completion () +{ + test $# = 2 || error "bug in the test script: not 2 parameters to test_path_completion" + + local cur="$1" expected="$2" + echo "$expected" >expected && + ( + # In the following tests calling this function we only + # care about how __git_complete_index_file() deals with + # unusual characters in path names. By requesting only + # untracked files we dont have to bother adding any + # paths to the index in those tests. + __git_complete_index_file --others && + print_comp + ) && + test_cmp expected out +} + +test_expect_success 'setup for path completion tests' ' + mkdir simple-dir \ + "spaces in dir" \ + árvíztűrő && + touch simple-dir/simple-file \ + "spaces in dir/spaces in file" \ + "árvíztűrő/Сайн яваарай" && + if test_have_prereq !MINGW && + mkdir BS\\dir \ + '$'separators\034in\035dir'' && + touch BS\\dir/DQ\"file \ + '$'separators\034in\035dir/sep\036in\037file'' + then + test_set_prereq FUNNYNAMES + else + rm -rf BS\\dir '$'separators\034in\035dir'' + fi +' + +test_expect_success '__git_complete_index_file - simple' ' + test_path_completion simple simple-dir && # Bash is supposed to + # add the trailing /. + test_path_completion simple-dir/simple simple-dir/simple-file +' + +test_expect_success \ + '__git_complete_index_file - escaped characters on cmdline' ' + test_path_completion spac "spaces in dir" && # Bash will turn this + # into "spaces\ in\ dir" + test_path_completion "spaces\\ i" \ + "spaces in dir" && + test_path_completion "spaces\\ in\\ dir/s" \ + "spaces in dir/spaces in file" && + test_path_completion "spaces\\ in\\ dir/spaces\\ i" \ + "spaces in dir/spaces in file" +' + +test_expect_success \ + '__git_complete_index_file - quoted characters on cmdline' ' + # Testing with an opening but without a corresponding closing + # double quote is important. + test_path_completion \"spac "spaces in dir" && + test_path_completion "\"spaces i" \ + "spaces in dir" && + test_path_completion "\"spaces in dir/s" \ + "spaces in dir/spaces in file" && + test_path_completion "\"spaces in dir/spaces i" \ + "spaces in dir/spaces in file" +' + +test_expect_success '__git_complete_index_file - UTF-8 in ls-files output' ' + test_path_completion á árvíztűrő && + test_path_completion árvíztűrő/С "árvíztűrő/Сайн яваарай" +' + +test_expect_success FUNNYNAMES \ + '__git_complete_index_file - C-style escapes in ls-files output' ' + test_path_completion BS \ + BS\\dir && + test_path_completion BS\\\\d \ + BS\\dir && + test_path_completion BS\\\\dir/DQ \ + BS\\dir/DQ\"file && + test_path_completion BS\\\\dir/DQ\\\"f \ + BS\\dir/DQ\"file +' + +test_expect_success FUNNYNAMES \ + '__git_complete_index_file - \nnn-escaped characters in ls-files output' ' + test_path_completion sep '$'separators\034in\035dir'' && + test_path_completion '$'separators\034i'' \ + '$'separators\034in\035dir'' && + test_path_completion '$'separators\034in\035dir/sep'' \ + '$'separators\034in\035dir/sep\036in\037file'' && + test_path_completion '$'separators\034in\035dir/sep\036i'' \ + '$'separators\034in\035dir/sep\036in\037file'' +' + +test_expect_success FUNNYNAMES \ + '__git_complete_index_file - removing repeated quoted path components' ' + test_when_finished rm -r repeated-quoted && + mkdir repeated-quoted && # A directory whose name in itself + # would not be quoted ... + >repeated-quoted/0-file && + >repeated-quoted/1\"file && # ... but here the file makes the + # dirname quoted ... + >repeated-quoted/2-file && + >repeated-quoted/3\"file && # ... and here, too. + + # Still, we shold only list the directory name only once. + test_path_completion repeated repeated-quoted +' + +test_expect_success 'teardown after path completion tests' ' + rm -rf simple-dir "spaces in dir" árvíztűrő \ + BS\\dir '$'separators\034in\035dir'' +' + + test_expect_success '__git_get_config_variables' ' cat >expect <<-EOF && name-1 @@ -1191,17 +1387,6 @@ test_expect_success '__git_pretty_aliases' ' test_cmp expect actual ' -test_expect_success '__git_aliases' ' - cat >expect <<-EOF && - ci - co - EOF - test_config alias.ci commit && - test_config alias.co checkout && - __git_aliases >actual && - test_cmp expect actual -' - test_expect_success 'basic' ' run_completion "git " && # built-in @@ -1237,18 +1422,20 @@ test_expect_success 'double dash "git" itself' ' test_expect_success 'double dash "git checkout"' ' test_completion "git checkout --" <<-\EOF --quiet Z + --detach Z + --track Z + --orphan=Z --ours Z --theirs Z - --track Z - --no-track Z --merge Z - --conflict= - --orphan Z + --conflict=Z --patch Z - --detach Z --ignore-skip-worktree-bits Z + --ignore-other-worktrees Z --recurse-submodules Z - --no-recurse-submodules Z + --progress Z + --no-quiet Z + --no-... Z EOF ' @@ -1363,6 +1550,7 @@ test_expect_success 'complete files' ' echo "expected" > .gitignore && echo "out" >> .gitignore && + echo "out_sorted" >> .gitignore && git add .gitignore && test_completion "git commit " ".gitignore" && @@ -1452,6 +1640,13 @@ test_expect_success 'completion used <cmd> completion for alias: !f() { : git <c EOF ' +test_expect_success 'completion without explicit _git_xxx function' ' + test_completion "git version --" <<-\EOF + --build-options Z + --no-build-options Z + EOF +' + test_expect_failure 'complete with tilde expansion' ' git init tmp && cd tmp && test_when_finished "cd .. && rm -rf tmp" && @@ -1495,4 +1690,28 @@ do ' done +test_expect_success 'sourcing the completion script clears cached commands' ' + __git_compute_all_commands && + verbose test -n "$__git_all_commands" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__git_all_commands" +' + +test_expect_success !GETTEXT_POISON 'sourcing the completion script clears cached merge strategies' ' + __git_compute_merge_strategies && + verbose test -n "$__git_merge_strategies" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__git_merge_strategies" +' + +test_expect_success 'sourcing the completion script clears cached --options' ' + __gitcomp_builtin checkout && + verbose test -n "$__gitcomp_builtin_checkout" && + __gitcomp_builtin notes_edit && + verbose test -n "$__gitcomp_builtin_notes_edit" && + . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && + verbose test -z "$__gitcomp_builtin_checkout" && + verbose test -z "$__gitcomp_builtin_notes_edit" +' + test_done diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 97c9b32c2e..c3b89ae783 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -148,7 +148,7 @@ test_expect_success 'prompt - inside .git directory' ' test_expect_success 'prompt - deep inside .git directory' ' printf " (GIT_DIR!)" >expected && ( - cd .git/refs/heads && + cd .git/objects && __git_ps1 >"$actual" ) && test_cmp expected "$actual" @@ -735,22 +735,12 @@ test_expect_success 'prompt - hide if pwd ignored - env var set, config unset, p test_cmp expected "$actual" ' -test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stdout)' ' +test_expect_success 'prompt - hide if pwd ignored - inside gitdir' ' printf " (GIT_DIR!)" >expected && ( GIT_PS1_HIDE_IF_PWD_IGNORED=y && cd .git && - __git_ps1 >"$actual" 2>/dev/null - ) && - test_cmp expected "$actual" -' - -test_expect_success 'prompt - hide if pwd ignored - inside gitdir (stderr)' ' - printf "" >expected && - ( - GIT_PS1_HIDE_IF_PWD_IGNORED=y && - cd .git && - __git_ps1 >/dev/null 2>"$actual" + __git_ps1 >"$actual" ) && test_cmp expected "$actual" ' diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 8a8a9329ee..2b2181dca0 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -145,12 +145,28 @@ test_pause () { "$SHELL_PATH" <&6 >&5 2>&7 } -# Wrap git in gdb. Adding this to a command can make it easier to -# understand what is going on in a failing test. +# Wrap git with a debugger. Adding this to a command can make it easier +# to understand what is going on in a failing test. # -# Example: "debug git checkout master". +# Examples: +# debug git checkout master +# debug --debugger=nemiver git $ARGS +# debug -d "valgrind --tool=memcheck --track-origins=yes" git $ARGS debug () { - GIT_TEST_GDB=1 "$@" <&6 >&5 2>&7 + case "$1" in + -d) + GIT_DEBUGGER="$2" && + shift 2 + ;; + --debugger=*) + GIT_DEBUGGER="${1#*=}" && + shift 1 + ;; + *) + GIT_DEBUGGER=1 + ;; + esac && + GIT_DEBUGGER="${GIT_DEBUGGER}" "$@" <&6 >&5 2>&7 } # Call test_commit with the arguments @@ -278,8 +294,20 @@ write_script () { # The single parameter is the prerequisite tag (a simple word, in all # capital letters by convention). +test_unset_prereq () { + ! test_have_prereq "$1" || + satisfied_prereq="${satisfied_prereq% $1 *} ${satisfied_prereq#* $1 }" +} + test_set_prereq () { - satisfied_prereq="$satisfied_prereq$1 " + case "$1" in + !*) + test_unset_prereq "${1#!}" + ;; + *) + satisfied_prereq="$satisfied_prereq$1 " + ;; + esac } satisfied_prereq=" " lazily_testable_prereq= lazily_tested_prereq= @@ -629,30 +657,30 @@ test_must_fail () { _test_ok= ;; esac - "$@" + "$@" 2>&7 exit_code=$? if test $exit_code -eq 0 && ! list_contains "$_test_ok" success then - echo >&2 "test_must_fail: command succeeded: $*" + echo >&4 "test_must_fail: command succeeded: $*" return 1 elif test_match_signal 13 $exit_code && list_contains "$_test_ok" sigpipe then return 0 elif test $exit_code -gt 129 && test $exit_code -le 192 then - echo >&2 "test_must_fail: died by signal $(($exit_code - 128)): $*" + echo >&4 "test_must_fail: died by signal $(($exit_code - 128)): $*" return 1 elif test $exit_code -eq 127 then - echo >&2 "test_must_fail: command not found: $*" + echo >&4 "test_must_fail: command not found: $*" return 1 elif test $exit_code -eq 126 then - echo >&2 "test_must_fail: valgrind error: $*" + echo >&4 "test_must_fail: valgrind error: $*" return 1 fi return 0 -} +} 7>&2 2>&4 # Similar to test_must_fail, but tolerates success, too. This is # meant to be used in contexts like: @@ -668,8 +696,8 @@ test_must_fail () { # Accepts the same options as test_must_fail. test_might_fail () { - test_must_fail ok=success "$@" -} + test_must_fail ok=success "$@" 2>&7 +} 7>&2 2>&4 # Similar to test_must_fail and test_might_fail, but check that a # given command exited with a given exit code. Meant to be used as: @@ -681,16 +709,16 @@ test_might_fail () { test_expect_code () { want_code=$1 shift - "$@" + "$@" 2>&7 exit_code=$? if test $exit_code = $want_code then return 0 fi - echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" + echo >&4 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" return 1 -} +} 7>&2 2>&4 # test_cmp is a helper function to compare actual and expected output. # You can use it like: @@ -752,18 +780,18 @@ test_i18ngrep () { shift ! grep "$@" && return 0 - echo >&2 "error: '! grep $@' did find a match in:" + echo >&4 "error: '! grep $@' did find a match in:" else grep "$@" && return 0 - echo >&2 "error: 'grep $@' didn't find a match in:" + echo >&4 "error: 'grep $@' didn't find a match in:" fi if test -s "$last_arg" then - cat >&2 "$last_arg" + cat >&4 "$last_arg" else - echo >&2 "<File '$last_arg' is empty>" + echo >&4 "<File '$last_arg' is empty>" fi return 1 @@ -774,7 +802,7 @@ test_i18ngrep () { # not output anything when they fail. verbose () { "$@" && return 0 - echo >&2 "command failed: $(git rev-parse --sq-quote "$@")" + echo >&4 "command failed: $(git rev-parse --sq-quote "$@")" return 1 } @@ -782,6 +810,7 @@ verbose () { # otherwise. test_must_be_empty () { + test_path_is_file "$1" && if test -s "$1" then echo "'$1' is not empty, it contains:" @@ -892,8 +921,8 @@ test_write_lines () { } perl () { - command "$PERL_PATH" "$@" -} + command "$PERL_PATH" "$@" 2>&7 +} 7>&2 2>&4 # Is the value one of the various ways to spell a boolean true/false? test_normalize_bool () { @@ -1033,13 +1062,13 @@ test_env () { shift ;; *) - "$@" + "$@" 2>&7 exit ;; esac done ) -} +} 7>&2 2>&4 # Returns true if the numeric exit code in "$2" represents the expected signal # in "$1". Signals should be given numerically. @@ -1081,9 +1110,9 @@ nongit () { GIT_CEILING_DIRECTORIES=$(pwd) && export GIT_CEILING_DIRECTORIES && cd non-repo && - "$@" + "$@" 2>&7 ) -} +} 7>&2 2>&4 # convert stdin to pktline representation; note that empty input becomes an # empty packet, not a flush packet (for that you can just print 0000 yourself). diff --git a/t/test-lib.sh b/t/test-lib.sh index 816e692391..28315706be 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -184,6 +184,8 @@ _x40="$_x35$_x05" # Zero SHA-1 _z40=0000000000000000000000000000000000000000 +OID_REGEX="$_x40" +ZERO_OID=$_z40 EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904 EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 @@ -195,7 +197,7 @@ LF=' # when case-folding filenames u200c=$(printf '\342\200\214') -export _x05 _x35 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB +export _x05 _x35 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB ZERO_OID OID_REGEX # Each test should start with something like this, after copyright notices: # @@ -264,7 +266,24 @@ do GIT_TEST_CHAIN_LINT=0 shift ;; -x) - trace=t + # Some test scripts can't be reliably traced with '-x', + # unless the test is run with a Bash version supporting + # BASH_XTRACEFD (introduced in Bash v4.1). Check whether + # this test is marked as such, and ignore '-x' if it + # isn't executed with a suitable Bash version. + if test -z "$test_untraceable" || { + test -n "$BASH_VERSION" && { + test ${BASH_VERSINFO[0]} -gt 4 || { + test ${BASH_VERSINFO[0]} -eq 4 && + test ${BASH_VERSINFO[1]} -ge 1 + } + } + } + then + trace=t + else + echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" + fi shift ;; --verbose-log) verbose_log=t @@ -940,16 +959,16 @@ then fi fi -GITPERLLIB="$GIT_BUILD_DIR"/perl/blib/lib:"$GIT_BUILD_DIR"/perl/blib/arch/auto/Git +GITPERLLIB="$GIT_BUILD_DIR"/perl/build/lib export GITPERLLIB test -d "$GIT_BUILD_DIR"/templates/blt || { error "You haven't built things yet, have you?" } -if ! test -x "$GIT_BUILD_DIR"/t/helper/test-chmtime +if ! test -x "$GIT_BUILD_DIR"/t/helper/test-tool then - echo >&2 'You need to build test-chmtime:' - echo >&2 'Run "make t/helper/test-chmtime" in the source (toplevel) directory' + echo >&2 'You need to build test-tool:' + echo >&2 'Run "make t/helper/test-tool" in the source (toplevel) directory' exit 1 fi @@ -1089,12 +1108,7 @@ test_lazy_prereq UTF8_NFD_TO_NFC ' auml=$(printf "\303\244") aumlcdiar=$(printf "\141\314\210") >"$auml" && - case "$(echo *)" in - "$aumlcdiar") - true ;; - *) - false ;; - esac + test -f "$aumlcdiar" ' test_lazy_prereq AUTOIDENT ' @@ -1107,6 +1121,10 @@ test_lazy_prereq EXPENSIVE ' test -n "$GIT_TEST_LONG" ' +test_lazy_prereq EXPENSIVE_ON_WINDOWS ' + test_have_prereq EXPENSIVE || test_have_prereq !MINGW,!CYGWIN +' + test_lazy_prereq USR_BIN_TIME ' test -x /usr/bin/time ' @@ -1185,5 +1203,16 @@ test_lazy_prereq LONG_IS_64BIT ' test 8 -le "$(build_option sizeof-long)" ' -test_lazy_prereq TIME_IS_64BIT 'test-date is64bit' -test_lazy_prereq TIME_T_IS_64BIT 'test-date time_t-is64bit' +test_lazy_prereq TIME_IS_64BIT 'test-tool date is64bit' +test_lazy_prereq TIME_T_IS_64BIT 'test-tool date time_t-is64bit' + +test_lazy_prereq CURL ' + curl --version +' + +# SHA1 is a test if the hash algorithm in use is SHA-1. This is both for tests +# which will not work with other hash algorithms and tests that work but don't +# test anything meaningful (e.g. special values which cause short collisions). +test_lazy_prereq SHA1 ' + test $(git hash-object /dev/null) = e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +' |