diff options
Diffstat (limited to 't')
| -rwxr-xr-x | t/t5504-fetch-receive-strict.sh | 14 | ||||
| -rwxr-xr-x | t/t8003-blame-corner-cases.sh | 36 | ||||
| -rwxr-xr-x | t/t8013-blame-ignore-revs.sh | 274 | ||||
| -rwxr-xr-x | t/t8014-blame-ignore-fuzzy.sh | 437 |
4 files changed, 754 insertions, 7 deletions
diff --git a/t/t5504-fetch-receive-strict.sh b/t/t5504-fetch-receive-strict.sh index 7bc706873c..fdfe179b11 100755 --- a/t/t5504-fetch-receive-strict.sh +++ b/t/t5504-fetch-receive-strict.sh @@ -164,9 +164,9 @@ test_expect_success 'fsck with unsorted skipList' ' test_expect_success 'fsck with invalid or bogus skipList input' ' git -c fsck.skipList=/dev/null -c fsck.missingEmail=ignore fsck && test_must_fail git -c fsck.skipList=does-not-exist -c fsck.missingEmail=ignore fsck 2>err && - test_i18ngrep "Could not open skip list: does-not-exist" err && + test_i18ngrep "could not open.*: does-not-exist" err && test_must_fail git -c fsck.skipList=.git/config -c fsck.missingEmail=ignore fsck 2>err && - test_i18ngrep "Invalid SHA-1: \[core\]" err + test_i18ngrep "invalid object name: \[core\]" err ' test_expect_success 'fsck with other accepted skipList input (comments & empty lines)' ' @@ -193,7 +193,7 @@ test_expect_success 'fsck no garbage output from comments & empty lines errors' test_expect_success 'fsck with invalid abbreviated skipList input' ' echo $commit | test_copy_bytes 20 >SKIP.abbreviated && test_must_fail git -c fsck.skipList=SKIP.abbreviated fsck 2>err-abbreviated && - test_i18ngrep "^fatal: Invalid SHA-1: " err-abbreviated + test_i18ngrep "^fatal: invalid object name: " err-abbreviated ' test_expect_success 'fsck with exhaustive accepted skipList input (various types of comments etc.)' ' @@ -226,10 +226,10 @@ test_expect_success 'push with receive.fsck.skipList' ' test_must_fail git push --porcelain dst bogus && git --git-dir=dst/.git config receive.fsck.skipList does-not-exist && test_must_fail git push --porcelain dst bogus 2>err && - test_i18ngrep "Could not open skip list: does-not-exist" err && + test_i18ngrep "could not open.*: does-not-exist" err && git --git-dir=dst/.git config receive.fsck.skipList config && test_must_fail git push --porcelain dst bogus 2>err && - test_i18ngrep "Invalid SHA-1: \[core\]" err && + test_i18ngrep "invalid object name: \[core\]" err && git --git-dir=dst/.git config receive.fsck.skipList SKIP && git push --porcelain dst bogus @@ -255,10 +255,10 @@ test_expect_success 'fetch with fetch.fsck.skipList' ' test_must_fail git --git-dir=dst/.git fetch "file://$(pwd)" $refspec && git --git-dir=dst/.git config fetch.fsck.skipList does-not-exist && test_must_fail git --git-dir=dst/.git fetch "file://$(pwd)" $refspec 2>err && - test_i18ngrep "Could not open skip list: does-not-exist" err && + test_i18ngrep "could not open.*: does-not-exist" err && git --git-dir=dst/.git config fetch.fsck.skipList dst/.git/config && test_must_fail git --git-dir=dst/.git fetch "file://$(pwd)" $refspec 2>err && - test_i18ngrep "Invalid SHA-1: \[core\]" err && + test_i18ngrep "invalid object name: \[core\]" err && git --git-dir=dst/.git config fetch.fsck.skipList dst/.git/SKIP && git --git-dir=dst/.git fetch "file://$(pwd)" $refspec diff --git a/t/t8003-blame-corner-cases.sh b/t/t8003-blame-corner-cases.sh index c92a47b6d5..1c5fb1d1f8 100755 --- a/t/t8003-blame-corner-cases.sh +++ b/t/t8003-blame-corner-cases.sh @@ -275,4 +275,40 @@ test_expect_success 'blame file with CRLF core.autocrlf=true' ' grep "A U Thor" actual ' +# Tests the splitting and merging of blame entries in blame_coalesce(). +# The output of blame is the same, regardless of whether blame_coalesce() runs +# or not, so we'd likely only notice a problem if blame crashes or assigned +# blame to the "splitting" commit ('SPLIT' below). +test_expect_success 'blame coalesce' ' + cat >giraffe <<-\EOF && + ABC + DEF + EOF + git add giraffe && + git commit -m "original file" && + oid=$(git rev-parse HEAD) && + + cat >giraffe <<-\EOF && + ABC + SPLIT + DEF + EOF + git add giraffe && + git commit -m "interior SPLIT line" && + + cat >giraffe <<-\EOF && + ABC + DEF + EOF + git add giraffe && + git commit -m "same contents as original" && + + cat >expect <<-EOF && + $oid 1) ABC + $oid 2) DEF + EOF + git -c core.abbrev=40 blame -s giraffe >actual && + test_cmp expect actual +' + test_done diff --git a/t/t8013-blame-ignore-revs.sh b/t/t8013-blame-ignore-revs.sh new file mode 100755 index 0000000000..36dc31eb39 --- /dev/null +++ b/t/t8013-blame-ignore-revs.sh @@ -0,0 +1,274 @@ +#!/bin/sh + +test_description='ignore revisions when blaming' +. ./test-lib.sh + +# Creates: +# A--B--X +# A added line 1 and B added line 2. X makes changes to those lines. Sanity +# check that X is blamed for both lines. +test_expect_success setup ' + test_commit A file line1 && + + echo line2 >>file && + git add file && + test_tick && + git commit -m B && + git tag B && + + test_write_lines line-one line-two >file && + git add file && + test_tick && + git commit -m X && + git tag X && + + git blame --line-porcelain file >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse X >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse X >expect && + test_cmp expect actual + ' + +# Ignore X, make sure A is blamed for line 1 and B for line 2. +test_expect_success ignore_rev_changing_lines ' + git blame --line-porcelain --ignore-rev X file >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse A >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual + ' + +# For ignored revs that have added 'unblamable' lines, attribute those to the +# ignored commit. +# A--B--X--Y +# Where Y changes lines 1 and 2, and adds lines 3 and 4. The added lines ought +# to have nothing in common with "line-one" or "line-two", to keep any +# heuristics from matching them with any lines in the parent. +test_expect_success ignore_rev_adding_unblamable_lines ' + test_write_lines line-one-change line-two-changed y3 y4 >file && + git add file && + test_tick && + git commit -m Y && + git tag Y && + + git rev-parse Y >expect && + git blame --line-porcelain file --ignore-rev Y >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 3" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 4" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual + ' + +# Ignore X and Y, both in separate files. Lines 1 == A, 2 == B. +test_expect_success ignore_revs_from_files ' + git rev-parse X >ignore_x && + git rev-parse Y >ignore_y && + git blame --line-porcelain file --ignore-revs-file ignore_x --ignore-revs-file ignore_y >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse A >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual + ' + +# Ignore X from the config option, Y from a file. +test_expect_success ignore_revs_from_configs_and_files ' + git config --add blame.ignoreRevsFile ignore_x && + git blame --line-porcelain file --ignore-revs-file ignore_y >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse A >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual + ' + +# Override blame.ignoreRevsFile (ignore_x) with an empty string. X should be +# blamed now for lines 1 and 2, since we are no longer ignoring X. +test_expect_success override_ignore_revs_file ' + git blame --line-porcelain file --ignore-revs-file "" --ignore-revs-file ignore_y >blame_raw && + git rev-parse X >expect && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual + ' +test_expect_success bad_files_and_revs ' + test_must_fail git blame file --ignore-rev NOREV 2>err && + test_i18ngrep "cannot find revision NOREV to ignore" err && + + test_must_fail git blame file --ignore-revs-file NOFILE 2>err && + test_i18ngrep "could not open.*: NOFILE" err && + + echo NOREV >ignore_norev && + test_must_fail git blame file --ignore-revs-file ignore_norev 2>err && + test_i18ngrep "invalid object name: NOREV" err + ' + +# For ignored revs that have added 'unblamable' lines, mark those lines with a +# '*' +# A--B--X--Y +# Lines 3 and 4 are from Y and unblamable. This was set up in +# ignore_rev_adding_unblamable_lines. +test_expect_success mark_unblamable_lines ' + git config --add blame.markUnblamableLines true && + + git blame --ignore-rev Y file >blame_raw && + echo "*" >expect && + + sed -n "3p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "4p" blame_raw | cut -c1 >actual && + test_cmp expect actual + ' + +# Commit Z will touch the first two lines. Y touched all four. +# A--B--X--Y--Z +# The blame output when ignoring Z should be: +# ?Y ... 1) +# ?Y ... 2) +# Y ... 3) +# Y ... 4) +# We're checking only the first character +test_expect_success mark_ignored_lines ' + git config --add blame.markIgnoredLines true && + + test_write_lines line-one-Z line-two-Z y3 y4 >file && + git add file && + test_tick && + git commit -m Z && + git tag Z && + + git blame --ignore-rev Z file >blame_raw && + echo "?" >expect && + + sed -n "1p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "2p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "3p" blame_raw | cut -c1 >actual && + ! test_cmp expect actual && + + sed -n "4p" blame_raw | cut -c1 >actual && + ! test_cmp expect actual + ' + +# For ignored revs that added 'unblamable' lines and more recent commits changed +# the blamable lines, mark the unblamable lines with a +# '*' +# A--B--X--Y--Z +# Lines 3 and 4 are from Y and unblamable, as set up in +# ignore_rev_adding_unblamable_lines. Z changed lines 1 and 2. +test_expect_success mark_unblamable_lines_intermediate ' + git config --add blame.markUnblamableLines true && + + git blame --ignore-rev Y file >blame_raw 2>stderr && + echo "*" >expect && + + sed -n "3p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "4p" blame_raw | cut -c1 >actual && + test_cmp expect actual + ' + +# The heuristic called by guess_line_blames() tries to find the size of a +# blame_entry 'e' in the parent's address space. Those calculations need to +# check for negative or zero values for when a blame entry is completely outside +# the window of the parent's version of a file. +# +# This happens when one commit adds several lines (commit B below). A later +# commit (C) changes one line in the middle of B's change. Commit C gets blamed +# for its change, and that breaks up B's change into multiple blame entries. +# When processing B, one of the blame_entries is outside A's window (which was +# zero - it had no lines added on its side of the diff). +# +# A--B--C, ignore B to test the ignore heuristic's boundary checks. +test_expect_success ignored_chunk_negative_parent_size ' + rm -rf .git/ && + git init && + + test_write_lines L1 L2 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m A && + git tag A && + + test_write_lines L1 L2 L3 L4 L5 L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m B && + git tag B && + + test_write_lines L1 L2 L3 L4 xxx L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m C && + git tag C && + + git blame file --ignore-rev B >blame_raw + ' + +# Resetting the repo and creating: +# +# A--B--M +# \ / +# C-+ +# +# 'A' creates a file. B changes line 1, and C changes line 9. M merges. +test_expect_success ignore_merge ' + rm -rf .git/ && + git init && + + test_write_lines L1 L2 L3 L4 L5 L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m A && + git tag A && + + test_write_lines BB L2 L3 L4 L5 L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m B && + git tag B && + + git reset --hard A && + test_write_lines L1 L2 L3 L4 L5 L6 L7 L8 CC >file && + git add file && + test_tick && + git commit -m C && + git tag C && + + test_merge M B && + git blame --line-porcelain file --ignore-rev M >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 9" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse C >expect && + test_cmp expect actual + ' + +test_done diff --git a/t/t8014-blame-ignore-fuzzy.sh b/t/t8014-blame-ignore-fuzzy.sh new file mode 100755 index 0000000000..6e61882b6f --- /dev/null +++ b/t/t8014-blame-ignore-fuzzy.sh @@ -0,0 +1,437 @@ +#!/bin/sh + +test_description='git blame ignore fuzzy heuristic' +. ./test-lib.sh + +pick_author='s/^[0-9a-f^]* *(\([^ ]*\) .*/\1/' + +# Each test is composed of 4 variables: +# titleN - the test name +# aN - the initial content +# bN - the final content +# expectedN - the line numbers from aN that we expect git blame +# on bN to identify, or "Final" if bN itself should +# be identified as the origin of that line. + +# We start at test 2 because setup will show as test 1 +title2="Regression test for partially overlapping search ranges" +cat <<EOF >a2 +1 +2 +3 +abcdef +5 +6 +7 +ijkl +9 +10 +11 +pqrs +13 +14 +15 +wxyz +17 +18 +19 +EOF +cat <<EOF >b2 +abcde +ijk +pqr +wxy +EOF +cat <<EOF >expected2 +4 +8 +12 +16 +EOF + +title3="Combine 3 lines into 2" +cat <<EOF >a3 +if ((maxgrow==0) || + ( single_line_field && (field->dcols < maxgrow)) || + (!single_line_field && (field->drows < maxgrow))) +EOF +cat <<EOF >b3 +if ((maxgrow == 0) || (single_line_field && (field->dcols < maxgrow)) || + (!single_line_field && (field->drows < maxgrow))) { +EOF +cat <<EOF >expected3 +2 +3 +EOF + +title4="Add curly brackets" +cat <<EOF >a4 + if (rows) *rows = field->rows; + if (cols) *cols = field->cols; + if (frow) *frow = field->frow; + if (fcol) *fcol = field->fcol; +EOF +cat <<EOF >b4 + if (rows) { + *rows = field->rows; + } + if (cols) { + *cols = field->cols; + } + if (frow) { + *frow = field->frow; + } + if (fcol) { + *fcol = field->fcol; + } +EOF +cat <<EOF >expected4 +1 +1 +Final +2 +2 +Final +3 +3 +Final +4 +4 +Final +EOF + + +title5="Combine many lines and change case" +cat <<EOF >a5 +for(row=0,pBuffer=field->buf; + row<height; + row++,pBuffer+=width ) +{ + if ((len = (int)( After_End_Of_Data( pBuffer, width ) - pBuffer )) > 0) + { + wmove( win, row, 0 ); + waddnstr( win, pBuffer, len ); +EOF +cat <<EOF >b5 +for (Row = 0, PBuffer = field->buf; Row < Height; Row++, PBuffer += Width) { + if ((Len = (int)(afterEndOfData(PBuffer, Width) - PBuffer)) > 0) { + wmove(win, Row, 0); + waddnstr(win, PBuffer, Len); +EOF +cat <<EOF >expected5 +1 +5 +7 +8 +EOF + +title6="Rename and combine lines" +cat <<EOF >a6 +bool need_visual_update = ((form != (FORM *)0) && + (form->status & _POSTED) && + (form->current==field)); + +if (need_visual_update) + Synchronize_Buffer(form); + +if (single_line_field) +{ + growth = field->cols * amount; + if (field->maxgrow) + growth = Minimum(field->maxgrow - field->dcols,growth); + field->dcols += growth; + if (field->dcols == field->maxgrow) +EOF +cat <<EOF >b6 +bool NeedVisualUpdate = ((Form != (FORM *)0) && (Form->status & _POSTED) && + (Form->current == field)); + +if (NeedVisualUpdate) { + synchronizeBuffer(Form); +} + +if (SingleLineField) { + Growth = field->cols * amount; + if (field->maxgrow) { + Growth = Minimum(field->maxgrow - field->dcols, Growth); + } + field->dcols += Growth; + if (field->dcols == field->maxgrow) { +EOF +cat <<EOF >expected6 +1 +3 +4 +5 +6 +Final +7 +8 +10 +11 +12 +Final +13 +14 +EOF + +# Both lines match identically so position must be used to tie-break. +title7="Same line twice" +cat <<EOF >a7 +abc +abc +EOF +cat <<EOF >b7 +abcd +abcd +EOF +cat <<EOF >expected7 +1 +2 +EOF + +title8="Enforce line order" +cat <<EOF >a8 +abcdef +ghijkl +ab +EOF +cat <<EOF >b8 +ghijk +abcd +EOF +cat <<EOF >expected8 +2 +3 +EOF + +title9="Expand lines and rename variables" +cat <<EOF >a9 +int myFunction(int ArgumentOne, Thing *ArgTwo, Blah XuglyBug) { + Squiggle FabulousResult = squargle(ArgumentOne, *ArgTwo, + XuglyBug) + EwwwGlobalWithAReallyLongNameYepTooLong; + return FabulousResult * 42; +} +EOF +cat <<EOF >b9 +int myFunction(int argument_one, Thing *arg_asdfgh, + Blah xugly_bug) { + Squiggle fabulous_result = squargle(argument_one, + *arg_asdfgh, xugly_bug) + + g_ewww_global_with_a_really_long_name_yep_too_long; + return fabulous_result * 42; +} +EOF +cat <<EOF >expected9 +1 +1 +2 +3 +3 +4 +5 +EOF + +title10="Two close matches versus one less close match" +cat <<EOF >a10 +abcdef +abcdef +ghijkl +EOF +cat <<EOF >b10 +gh +abcdefx +EOF +cat <<EOF >expected10 +Final +2 +EOF + +# The first line of b matches best with the last line of a, but the overall +# match is better if we match it with the the first line of a. +title11="Piggy in the middle" +cat <<EOF >a11 +abcdefg +ijklmn +abcdefgh +EOF +cat <<EOF >b11 +abcdefghx +ijklm +EOF +cat <<EOF >expected11 +1 +2 +EOF + +title12="No trailing newline" +printf "abc\ndef" >a12 +printf "abx\nstu" >b12 +cat <<EOF >expected12 +1 +Final +EOF + +title13="Reorder includes" +cat <<EOF >a13 +#include "c.h" +#include "b.h" +#include "a.h" +#include "e.h" +#include "d.h" +EOF +cat <<EOF >b13 +#include "a.h" +#include "b.h" +#include "c.h" +#include "d.h" +#include "e.h" +EOF +cat <<EOF >expected13 +3 +2 +1 +5 +4 +EOF + +last_test=13 + +test_expect_success setup ' + for i in $(test_seq 2 $last_test) + do + # Append each line in a separate commit to make it easy to + # check which original line the blame output relates to. + + line_count=0 && + while IFS= read line + do + line_count=$((line_count+1)) && + echo "$line" >>"$i" && + git add "$i" && + test_tick && + GIT_AUTHOR_NAME="$line_count" git commit -m "$line_count" + done <"a$i" + done && + + for i in $(test_seq 2 $last_test) + do + # Overwrite the files with the final content. + cp b$i $i && + git add $i + done && + test_tick && + + # Commit the final content all at once so it can all be + # referred to with the same commit ID. + GIT_AUTHOR_NAME=Final git commit -m Final && + + IGNOREME=$(git rev-parse HEAD) +' + +for i in $(test_seq 2 $last_test); do + eval title="\$title$i" + test_expect_success "$title" \ + "git blame -M9 --ignore-rev $IGNOREME $i >output && + sed -e \"$pick_author\" output >actual && + test_cmp expected$i actual" +done + +# This invoked a null pointer dereference when the chunk callback was called +# with a zero length parent chunk and there were no more suspects. +test_expect_success 'Diff chunks with no suspects' ' + test_write_lines xy1 A B C xy1 >file && + git add file && + test_tick && + GIT_AUTHOR_NAME=1 git commit -m 1 && + + test_write_lines xy2 A B xy2 C xy2 >file && + git add file && + test_tick && + GIT_AUTHOR_NAME=2 git commit -m 2 && + REV_2=$(git rev-parse HEAD) && + + test_write_lines xy3 A >file && + git add file && + test_tick && + GIT_AUTHOR_NAME=3 git commit -m 3 && + REV_3=$(git rev-parse HEAD) && + + test_write_lines 1 1 >expected && + + git blame --ignore-rev $REV_2 --ignore-rev $REV_3 file >output && + sed -e "$pick_author" output >actual && + + test_cmp expected actual + ' + +test_expect_success 'position matching' ' + test_write_lines abc def >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=1 git commit -m 1 && + + test_write_lines abc def abc def >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=2 git commit -m 2 && + + test_write_lines abcx defx abcx defx >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=3 git commit -m 3 && + REV_3=$(git rev-parse HEAD) && + + test_write_lines abcy defy abcx defx >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=4 git commit -m 4 && + REV_4=$(git rev-parse HEAD) && + + test_write_lines 1 1 2 2 >expected && + + git blame --ignore-rev $REV_3 --ignore-rev $REV_4 file2 >output && + sed -e "$pick_author" output >actual && + + test_cmp expected actual + ' + +# This fails if each blame entry is processed independently instead of +# processing each diff change in full. +test_expect_success 'preserve order' ' + test_write_lines bcde >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=1 git commit -m 1 && + + test_write_lines bcde fghij >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=2 git commit -m 2 && + + test_write_lines bcde fghij abcd >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=3 git commit -m 3 && + + test_write_lines abcdx fghijx bcdex >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=4 git commit -m 4 && + REV_4=$(git rev-parse HEAD) && + + test_write_lines abcdx fghijy bcdex >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=5 git commit -m 5 && + REV_5=$(git rev-parse HEAD) && + + test_write_lines 1 2 3 >expected && + + git blame --ignore-rev $REV_4 --ignore-rev $REV_5 file3 >output && + sed -e "$pick_author" output >actual && + + test_cmp expected actual + ' + +test_done |