diff options
Diffstat (limited to 't')
85 files changed, 1742 insertions, 383 deletions
@@ -71,6 +71,7 @@ You can pass --verbose (or -v), --debug (or -d), and --immediate (or -i) command line argument to the test, or by setting GIT_TEST_OPTS appropriately before running "make". +-v:: --verbose:: This makes the test more verbose. Specifically, the command being run and their output if any are also @@ -81,6 +82,7 @@ appropriately before running "make". numbers matching <pattern>. The number matched against is simply the running count of the test within the file. +-d:: --debug:: This may help the person who is developing a new test. It causes the command defined with test_debug to run. @@ -89,6 +91,7 @@ appropriately before running "make". failed tests so that you can inspect its contents after the test finished. +-i:: --immediate:: This causes the test to immediately exit upon the first failed test. Cleanup commands requested with @@ -96,10 +99,17 @@ appropriately before running "make". in order to keep the state for inspection by the tester to diagnose the bug. +-l:: --long-tests:: This causes additional long-running tests to be run (where available), for more exhaustive testing. +-r:: +--run=<test-selector>:: + Run only the subset of tests indicated by + <test-selector>. See section "Skipping Tests" below for + <test-selector> syntax. + --valgrind=<tool>:: Execute all Git binaries under valgrind tool <tool> and exit with status 126 on errors (just like regular tests, this will @@ -187,10 +197,77 @@ and either can match the "t[0-9]{4}" part to skip the whole test, or t[0-9]{4} followed by ".$number" to say which particular test to skip. -Note that some tests in the existing test suite rely on previous -test item, so you cannot arbitrarily disable one and expect the -remainder of test to check what the test originally was intended -to check. +For an individual test suite --run could be used to specify that +only some tests should be run or that some tests should be +excluded from a run. + +The argument for --run is a list of individual test numbers or +ranges with an optional negation prefix that define what tests in +a test suite to include in the run. A range is two numbers +separated with a dash and matches a range of tests with both ends +been included. You may omit the first or the second number to +mean "from the first test" or "up to the very last test" +respectively. + +Optional prefix of '!' means that the test or a range of tests +should be excluded from the run. + +If --run starts with an unprefixed number or range the initial +set of tests to run is empty. If the first item starts with '!' +all the tests are added to the initial set. After initial set is +determined every test number or range is added or excluded from +the set one by one, from left to right. + +Individual numbers or ranges could be separated either by a space +or a comma. + +For example, to run only tests up to a specific test (21), one +could do this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='1-21' + +or this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='-21' + +Common case is to run several setup tests (1, 2, 3) and then a +specific test (21) that relies on that setup: + + $ sh ./t9200-git-cvsexport-commit.sh --run='1 2 3 21' + +or: + + $ sh ./t9200-git-cvsexport-commit.sh --run=1,2,3,21 + +or: + + $ sh ./t9200-git-cvsexport-commit.sh --run='-3 21' + +As noted above, the test set is built going though items left to +right, so this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='1-4 !3' + +will run tests 1, 2, and 4. Items that comes later have higher +precendence. It means that this: + + $ sh ./t9200-git-cvsexport-commit.sh --run='!3 1-4' + +would just run tests from 1 to 4, including 3. + +You may use negation with ranges. The following will run all +test in the test suite except from 7 up to 11: + + $ sh ./t9200-git-cvsexport-commit.sh --run='!7-11' + +Some tests in a test suite rely on the previous tests performing +certain actions, specifically some tests are designated as +"setup" test, so you cannot _arbitrarily_ disable one test and +expect the rest to function correctly. + +--run is mostly useful when you want to focus on a specific test +and know what setup is needed for it. Or when you want to run +everything up to a certain test. Naming Tests @@ -596,6 +673,27 @@ library for your script to use. ... ' + - test_write_lines <lines> + + Write <lines> on standard output, one line per argument. + Useful to prepare multi-line files in a compact form. + + Example: + + test_write_lines a b c d e f g >foo + + Is a more compact equivalent of: + cat >foo <<-EOF + a + b + c + d + e + f + g + EOF + + - test_pause This command is useful for writing and debugging tests and must be diff --git a/t/check-non-portable-shell.pl b/t/check-non-portable-shell.pl index 45971f43b7..b170cbc045 100755 --- a/t/check-non-portable-shell.pl +++ b/t/check-non-portable-shell.pl @@ -16,12 +16,12 @@ sub err { while (<>) { chomp; - /^\s*sed\s+-i/ and err 'sed -i is not portable'; - /^\s*echo\s+-n/ and err 'echo -n is not portable (please use printf)'; + /\bsed\s+-i/ and err 'sed -i is not portable'; + /\becho\s+-n/ and err 'echo -n is not portable (please use printf)'; /^\s*declare\s+/ and err 'arrays/declare not portable'; /^\s*[^#]\s*which\s/ and err 'which is not portable (please use type)'; - /test\s+[^=]*==/ and err '"test a == b" is not portable (please use =)'; - /^\s*export\s+[^=]*=/ and err '"export FOO=bar" is not portable (please use FOO=bar && export FOO)'; + /\btest\s+[^=]*==/ and err '"test a == b" is not portable (please use =)'; + /\bexport\s+[A-Za-z0-9_]*=/ and err '"export FOO=bar" is not portable (please use FOO=bar && export FOO)'; # this resets our $. for each file close ARGV if eof; } diff --git a/t/lib-credential.sh b/t/lib-credential.sh index 957ae936e8..9e7d7962b0 100755 --- a/t/lib-credential.sh +++ b/t/lib-credential.sh @@ -281,7 +281,7 @@ helper_test_timeout() { cat >askpass <<\EOF #!/bin/sh echo >&2 askpass: $* -what=`echo $1 | cut -d" " -f1 | tr A-Z a-z | tr -cd a-z` +what=$(echo $1 | cut -d" " -f1 | tr A-Z a-z | tr -cd a-z) echo "askpass-$what" EOF chmod +x askpass diff --git a/t/lib-cvs.sh b/t/lib-cvs.sh index 5076718916..9b2bcfb1b0 100644 --- a/t/lib-cvs.sh +++ b/t/lib-cvs.sh @@ -13,7 +13,7 @@ fi CVS="cvs -f" export CVS -cvsps_version=`cvsps -h 2>&1 | sed -ne 's/cvsps version //p'` +cvsps_version=$(cvsps -h 2>&1 | sed -ne 's/cvsps version //p') case "$cvsps_version" in 2.1 | 2.2*) ;; diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index 05824fa8e4..fd499e7c49 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -1,6 +1,6 @@ #!/bin/sh -gpg_version=`gpg --version 2>&1` +gpg_version=$(gpg --version 2>&1) if test $? = 127; then say "You do not seem to have gpg installed" else diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index 252cbf163b..fd53b57187 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -37,6 +37,11 @@ then test_done fi +if ! test_have_prereq SANITY; then + test_skip_or_die $GIT_TEST_HTTPD \ + "Cannot run httpd tests as root" +fi + HTTPD_PARA="" for DEFAULT_HTTPD_PATH in '/usr/sbin/httpd' '/usr/sbin/apache2' @@ -105,10 +110,15 @@ else "Could not identify web server at '$LIB_HTTPD_PATH'" fi +install_script () { + write_script "$HTTPD_ROOT_PATH/$1" <"$TEST_PATH/$1" +} + prepare_httpd() { mkdir -p "$HTTPD_DOCUMENT_ROOT_PATH" cp "$TEST_PATH"/passwd "$HTTPD_ROOT_PATH" - cp "$TEST_PATH"/broken-smart-http.sh "$HTTPD_ROOT_PATH" + install_script broken-smart-http.sh + install_script error.sh ln -s "$LIB_HTTPD_MODULE_PATH" "$HTTPD_ROOT_PATH/modules" @@ -132,7 +142,7 @@ prepare_httpd() { HTTPD_URL_USER=$HTTPD_PROTO://user%40host@$HTTPD_DEST HTTPD_URL_USER_PASS=$HTTPD_PROTO://user%40host:pass%40host@$HTTPD_DEST - if test -n "$LIB_HTTPD_DAV" -o -n "$LIB_HTTPD_SVN" + if test -n "$LIB_HTTPD_DAV" || test -n "$LIB_HTTPD_SVN" then HTTPD_PARA="$HTTPD_PARA -DDAV" diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 3a03e8263d..b384d79935 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -97,12 +97,16 @@ Alias /auth/dumb/ www/auth/dumb/ </LocationMatch> ScriptAliasMatch /smart_*[^/]*/(.*) ${GIT_EXEC_PATH}/git-http-backend/$1 ScriptAlias /broken_smart/ broken-smart-http.sh/ +ScriptAlias /error/ error.sh/ <Directory ${GIT_EXEC_PATH}> Options FollowSymlinks </Directory> <Files broken-smart-http.sh> Options ExecCGI </Files> +<Files error.sh> + Options ExecCGI +</Files> <Files ${GIT_EXEC_PATH}/git-http-backend> Options ExecCGI </Files> diff --git a/t/lib-httpd/broken-smart-http.sh b/t/lib-httpd/broken-smart-http.sh index f7ebfffa80..82cc610b0a 100755..100644 --- a/t/lib-httpd/broken-smart-http.sh +++ b/t/lib-httpd/broken-smart-http.sh @@ -1,4 +1,3 @@ -#!/bin/sh printf "Content-Type: text/%s\n" "html" echo printf "%s\n" "001e# service=git-upload-pack" diff --git a/t/lib-httpd/error.sh b/t/lib-httpd/error.sh new file mode 100755 index 0000000000..a77b8e5469 --- /dev/null +++ b/t/lib-httpd/error.sh @@ -0,0 +1,31 @@ +#!/bin/sh + +printf "Status: 500 Intentional Breakage\n" + +printf "Content-Type: " +charset=iso-8859-1 +case "$PATH_INFO" in +*html*) + printf "text/html" + ;; +*text*) + printf "text/plain" + ;; +*charset*) + printf "text/plain; charset=utf-8" + charset=utf-8 + ;; +*utf16*) + printf "text/plain; charset=utf-16" + charset=utf-16 + ;; +*odd-spacing*) + printf "text/plain; foo=bar ;charset=utf-16; other=nonsense" + charset=utf-16 + ;; +esac +printf "\n" + +printf "\n" +printf "this is the error message\n" | +iconv -f us-ascii -t $charset diff --git a/t/perf/p5302-pack-index.sh b/t/perf/p5302-pack-index.sh index 6cb5b0d55b..5ee9211f98 100755 --- a/t/perf/p5302-pack-index.sh +++ b/t/perf/p5302-pack-index.sh @@ -8,7 +8,7 @@ test_perf_large_repo test_expect_success 'repack' ' git repack -ad && - PACK=`ls .git/objects/pack/*.pack | head -n1` && + PACK=$(ls .git/objects/pack/*.pack | head -n1) && test -f "$PACK" && export PACK ' diff --git a/t/perf/p5310-pack-bitmaps.sh b/t/perf/p5310-pack-bitmaps.sh index 685d46f8b7..f8ed8573b7 100755 --- a/t/perf/p5310-pack-bitmaps.sh +++ b/t/perf/p5310-pack-bitmaps.sh @@ -8,6 +8,9 @@ test_perf_large_repo # note that we do everything through config, # since we want to be able to compare bitmap-aware # git versus non-bitmap git +# +# We intentionally use the deprecated pack.writebitmaps +# config so that we can test against older versions of git. test_expect_success 'setup bitmap config' ' git config pack.writebitmaps true && git config pack.writebitmaphashcache true diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index a2bb63ce8e..f10ba4a01e 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -42,9 +42,9 @@ test_expect_success 'success is reported like this' ' : ' -run_sub_test_lib_test () { - name="$1" descr="$2" # stdin is the body of the test code - shift 2 +_run_sub_test_lib_test_common () { + neg="$1" name="$2" descr="$3" # stdin is the body of the test code + shift 3 mkdir "$name" && ( # Pretend we're not running under a test harness, whether we @@ -70,10 +70,23 @@ run_sub_test_lib_test () { export TEST_DIRECTORY && TEST_OUTPUT_DIRECTORY=$(pwd) && export TEST_OUTPUT_DIRECTORY && - ./"$name.sh" "$@" >out 2>err + if test -z "$neg" + then + ./"$name.sh" "$@" >out 2>err + else + ! ./"$name.sh" "$@" >out 2>err + fi ) } +run_sub_test_lib_test () { + _run_sub_test_lib_test_common '' "$@" +} + +run_sub_test_lib_test_err () { + _run_sub_test_lib_test_common '!' "$@" +} + check_sub_test_lib_test () { name="$1" # stdin is the expected output from the test ( @@ -84,6 +97,18 @@ check_sub_test_lib_test () { ) } +check_sub_test_lib_test_err () { + name="$1" # stdin is the expected output output from the test + # expected error output is in descriptior 3 + ( + cd "$name" && + sed -e 's/^> //' -e 's/Z$//' >expect.out && + test_cmp expect.out out && + sed -e 's/^> //' -e 's/Z$//' <&3 >expect.err && + test_cmp expect.err err + ) +} + test_expect_success 'pretend we have a fully passing test suite' " run_sub_test_lib_test full-pass '3 passing tests' <<-\\EOF && for i in 1 2 3 @@ -270,6 +295,398 @@ test_expect_success 'test --verbose-only' ' EOF ' +test_expect_success 'GIT_SKIP_TESTS' " + ( + GIT_SKIP_TESTS='git.2' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-basic \ + 'GIT_SKIP_TESTS' <<-\\EOF && + for i in 1 2 3 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-basic <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) + > ok 3 - passing test #3 + > # passed all 3 test(s) + > 1..3 + EOF + ) +" + +test_expect_success 'GIT_SKIP_TESTS several tests' " + ( + GIT_SKIP_TESTS='git.2 git.5' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-several \ + 'GIT_SKIP_TESTS several tests' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-several <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) + > ok 3 - passing test #3 + > ok 4 - passing test #4 + > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF + ) +" + +test_expect_success 'GIT_SKIP_TESTS sh pattern' " + ( + GIT_SKIP_TESTS='git.[2-5]' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-sh-pattern \ + 'GIT_SKIP_TESTS sh pattern' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-sh-pattern <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (GIT_SKIP_TESTS) + > ok 3 # skip passing test #3 (GIT_SKIP_TESTS) + > ok 4 # skip passing test #4 (GIT_SKIP_TESTS) + > ok 5 # skip passing test #5 (GIT_SKIP_TESTS) + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF + ) +" + +test_expect_success '--run basic' " + run_sub_test_lib_test run-basic \ + '--run basic' --run='1 3 5' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-basic <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (--run) + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with a range' " + run_sub_test_lib_test run-range \ + '--run with a range' --run='1-3' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-range <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 # skip passing test #5 (--run) + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with two ranges' " + run_sub_test_lib_test run-two-ranges \ + '--run with two ranges' --run='1-2 5-6' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-two-ranges <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with a left open range' " + run_sub_test_lib_test run-left-open-range \ + '--run with a left open range' --run='-3' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-left-open-range <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 # skip passing test #5 (--run) + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with a right open range' " + run_sub_test_lib_test run-right-open-range \ + '--run with a right open range' --run='4-' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-right-open-range <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 # skip passing test #2 (--run) + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with basic negation' " + run_sub_test_lib_test run-basic-neg \ + '--run with basic negation' --run='"'!3'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-basic-neg <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run with two negations' " + run_sub_test_lib_test run-two-neg \ + '--run with two negations' --run='"'!3 !6'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-two-neg <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run a range and negation' " + run_sub_test_lib_test run-range-and-neg \ + '--run a range and negation' --run='"'-4 !2'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-range-and-neg <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (--run) + > ok 3 - passing test #3 + > ok 4 - passing test #4 + > ok 5 # skip passing test #5 (--run) + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run range negation' " + run_sub_test_lib_test run-range-neg \ + '--run range negation' --run='"'!1-3'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-range-neg <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 # skip passing test #2 (--run) + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 - passing test #6 + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run include, exclude and include' " + run_sub_test_lib_test run-inc-neg-inc \ + '--run include, exclude and include' \ + --run='"'1-5 !1-3 2'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-inc-neg-inc <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run include, exclude and include, comma separated' " + run_sub_test_lib_test run-inc-neg-inc-comma \ + '--run include, exclude and include, comma separated' \ + --run=1-5,\!1-3,2 <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-inc-neg-inc-comma <<-\\EOF + > ok 1 # skip passing test #1 (--run) + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 - passing test #4 + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run exclude and include' " + run_sub_test_lib_test run-neg-inc \ + '--run exclude and include' \ + --run='"'!3- 5'"' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-neg-inc <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 # skip passing test #3 (--run) + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run empty selectors' " + run_sub_test_lib_test run-empty-sel \ + '--run empty selectors' \ + --run='1,,3,,,5' <<-\\EOF && + for i in 1 2 3 4 5 6 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test run-empty-sel <<-\\EOF + > ok 1 - passing test #1 + > ok 2 # skip passing test #2 (--run) + > ok 3 - passing test #3 + > ok 4 # skip passing test #4 (--run) + > ok 5 - passing test #5 + > ok 6 # skip passing test #6 (--run) + > # passed all 6 test(s) + > 1..6 + EOF +" + +test_expect_success '--run invalid range start' " + run_sub_test_lib_test_err run-inv-range-start \ + '--run invalid range start' \ + --run='a-5' <<-\\EOF && + test_expect_success \"passing test #1\" 'true' + test_done + EOF + check_sub_test_lib_test_err run-inv-range-start \ + <<-\\EOF_OUT 3<<-\\EOF_ERR + > FATAL: Unexpected exit with code 1 + EOF_OUT + > error: --run: invalid non-numeric in range start: 'a-5' + EOF_ERR +" + +test_expect_success '--run invalid range end' " + run_sub_test_lib_test_err run-inv-range-end \ + '--run invalid range end' \ + --run='1-z' <<-\\EOF && + test_expect_success \"passing test #1\" 'true' + test_done + EOF + check_sub_test_lib_test_err run-inv-range-end \ + <<-\\EOF_OUT 3<<-\\EOF_ERR + > FATAL: Unexpected exit with code 1 + EOF_OUT + > error: --run: invalid non-numeric in range end: '1-z' + EOF_ERR +" + +test_expect_success '--run invalid selector' " + run_sub_test_lib_test_err run-inv-selector \ + '--run invalid selector' \ + --run='1?' <<-\\EOF && + test_expect_success \"passing test #1\" 'true' + test_done + EOF + check_sub_test_lib_test_err run-inv-selector \ + <<-\\EOF_OUT 3<<-\\EOF_ERR + > FATAL: Unexpected exit with code 1 + EOF_OUT + > error: --run: invalid non-numeric in test selector: '1?' + EOF_ERR +" + + test_set_prereq HAVEIT haveit=no test_expect_success HAVEIT 'test runs if prerequisite is satisfied' ' diff --git a/t/t0001-init.sh b/t/t0001-init.sh index bbc9cb60dd..e62c0ffbc2 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -56,7 +56,7 @@ test_expect_success 'plain through aliased command, outside any git repo' ' check_config plain-aliased/.git false unset ' -test_expect_failure 'plain nested through aliased command' ' +test_expect_success 'plain nested through aliased command' ' ( git init plain-ancestor-aliased && cd plain-ancestor-aliased && @@ -68,7 +68,7 @@ test_expect_failure 'plain nested through aliased command' ' check_config plain-ancestor-aliased/plain-nested/.git false unset ' -test_expect_failure 'plain nested in bare through aliased command' ' +test_expect_success 'plain nested in bare through aliased command' ' ( git init --bare bare-ancestor-aliased.git && cd bare-ancestor-aliased.git && @@ -185,14 +185,14 @@ test_expect_success 'init --bare/--shared overrides system/global config' ' git init --bare --shared=0666 init-bare-shared-override && check_config init-bare-shared-override true unset && test x0666 = \ - x`git config -f init-bare-shared-override/config core.sharedRepository` + x$(git config -f init-bare-shared-override/config core.sharedRepository) ' test_expect_success 'init honors global core.sharedRepository' ' test_config_global core.sharedRepository 0666 && git init shared-honor-global && test x0666 = \ - x`git config -f shared-honor-global/.git/config core.sharedRepository` + x$(git config -f shared-honor-global/.git/config core.sharedRepository) ' test_expect_success 'init rejects insanely long --template' ' @@ -285,7 +285,7 @@ test_expect_success 'init prefers command line to GIT_DIR' ' test_expect_success 'init with separate gitdir' ' rm -rf newdir && git init --separate-git-dir realgitdir newdir && - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected newdir/.git && test_path_is_dir realgitdir/refs ' @@ -299,7 +299,7 @@ test_expect_success 're-init to update git link' ' cd newdir && git init --separate-git-dir ../surrealgitdir ) && - echo "gitdir: `pwd`/surrealgitdir" >expected && + echo "gitdir: $(pwd)/surrealgitdir" >expected && test_cmp expected newdir/.git && test_path_is_dir surrealgitdir/refs && test_path_is_missing realgitdir/refs @@ -312,7 +312,7 @@ test_expect_success 're-init to move gitdir' ' cd newdir && git init --separate-git-dir ../realgitdir ) && - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected newdir/.git && test_path_is_dir realgitdir/refs ' @@ -326,7 +326,7 @@ test_expect_success SYMLINKS 're-init to move gitdir symlink' ' ln -s here .git && git init --separate-git-dir ../realgitdir ) && - echo "gitdir: `pwd`/realgitdir" >expected && + echo "gitdir: $(pwd)/realgitdir" >expected && test_cmp expected newdir/.git && test_cmp expected newdir/here && test_path_is_dir realgitdir/refs diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index 63beb99828..39e55a13c8 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -806,4 +806,29 @@ test_expect_success !MINGW 'quoting allows trailing whitespace' ' test_cmp err.expect err ' +test_expect_success NOT_MINGW,NOT_CYGWIN 'correct handling of backslashes' ' + rm -rf whitespace && + mkdir whitespace && + >"whitespace/trailing 1 " && + >"whitespace/trailing 2 \\\\" && + >"whitespace/trailing 3 \\\\" && + >"whitespace/trailing 4 \\ " && + >"whitespace/trailing 5 \\ \\ " && + >"whitespace/trailing 6 \\a\\" && + >whitespace/untracked && + sed -e "s/Z$//" >ignore <<-\EOF && + whitespace/trailing 1 \ Z + whitespace/trailing 2 \\\\Z + whitespace/trailing 3 \\\\ Z + whitespace/trailing 4 \\\ Z + whitespace/trailing 5 \\ \\\ Z + whitespace/trailing 6 \\a\\Z + EOF + echo whitespace/untracked >expect && + >err.expect && + git ls-files -o -X ignore whitespace >actual 2>err && + test_cmp expect actual && + test_cmp err.expect err +' + test_done diff --git a/t/t0010-racy-git.sh b/t/t0010-racy-git.sh index e45a9e40e4..5657c5a87b 100755 --- a/t/t0010-racy-git.sh +++ b/t/t0010-racy-git.sh @@ -14,7 +14,7 @@ do git update-index --add infocom echo xyzzy >infocom - files=`git diff-files -p` + files=$(git diff-files -p) test_expect_success \ "Racy GIT trial #$trial part A" \ 'test "" != "$files"' @@ -23,7 +23,7 @@ do echo xyzzy >cornerstone git update-index --add cornerstone - files=`git diff-files -p` + files=$(git diff-files -p) test_expect_success \ "Racy GIT trial #$trial part B" \ 'test "" != "$files"' diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index e526184a0b..d2e51a81bc 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -20,14 +20,14 @@ test_expect_success setup ' git commit -m initial && - one=`git rev-parse HEAD:one` && - dir=`git rev-parse HEAD:dir` && - two=`git rev-parse HEAD:dir/two` && - three=`git rev-parse HEAD:three` && + one=$(git rev-parse HEAD:one) && + dir=$(git rev-parse HEAD:dir) && + two=$(git rev-parse HEAD:dir/two) && + three=$(git rev-parse HEAD:three) && for w in Some extra lines here; do echo $w; done >>one && git diff >patch.file && - patched=`git hash-object --stdin <one` && + patched=$(git hash-object --stdin <one) && git read-tree --reset -u HEAD && echo happy. @@ -111,7 +111,7 @@ test_expect_success 'update with autocrlf=input' ' } done && - differs=`git diff-index --cached HEAD` && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -135,7 +135,7 @@ test_expect_success 'update with autocrlf=true' ' } done && - differs=`git diff-index --cached HEAD` && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -158,9 +158,9 @@ test_expect_success 'checkout with autocrlf=true' ' break } done && - test "$one" = `git hash-object --stdin <one` && - test "$two" = `git hash-object --stdin <dir/two` && - differs=`git diff-index --cached HEAD` && + test "$one" = $(git hash-object --stdin <one) && + test "$two" = $(git hash-object --stdin <dir/two) && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -184,9 +184,9 @@ test_expect_success 'checkout with autocrlf=input' ' git update-index -- $f fi done && - test "$one" = `git hash-object --stdin <one` && - test "$two" = `git hash-object --stdin <dir/two` && - differs=`git diff-index --cached HEAD` && + test "$one" = $(git hash-object --stdin <one) && + test "$two" = $(git hash-object --stdin <dir/two) && + differs=$(git diff-index --cached HEAD) && test -z "$differs" || { echo Oops "$differs" false @@ -200,7 +200,7 @@ test_expect_success 'apply patch (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply patch.file && - test "$patched" = "`git hash-object --stdin <one`" || { + test "$patched" = "$(git hash-object --stdin <one)" || { echo "Eh? apply without index" false } @@ -213,7 +213,7 @@ test_expect_success 'apply patch --cached (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply --cached patch.file && - test "$patched" = `git rev-parse :one` || { + test "$patched" = $(git rev-parse :one) || { echo "Eh? apply with --cached" false } @@ -226,8 +226,8 @@ test_expect_success 'apply patch --index (autocrlf=input)' ' git read-tree --reset -u HEAD && git apply --index patch.file && - test "$patched" = `git rev-parse :one` && - test "$patched" = `git hash-object --stdin <one` || { + test "$patched" = $(git rev-parse :one) && + test "$patched" = $(git hash-object --stdin <one) || { echo "Eh? apply with --index" false } @@ -240,7 +240,7 @@ test_expect_success 'apply patch (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply patch.file && - test "$patched" = "`remove_cr <one | git hash-object --stdin`" || { + test "$patched" = "$(remove_cr <one | git hash-object --stdin)" || { echo "Eh? apply without index" false } @@ -253,7 +253,7 @@ test_expect_success 'apply patch --cached (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply --cached patch.file && - test "$patched" = `git rev-parse :one` || { + test "$patched" = $(git rev-parse :one) || { echo "Eh? apply without index" false } @@ -266,8 +266,8 @@ test_expect_success 'apply patch --index (autocrlf=true)' ' git read-tree --reset -u HEAD && git apply --index patch.file && - test "$patched" = `git rev-parse :one` && - test "$patched" = "`remove_cr <one | git hash-object --stdin`" || { + test "$patched" = $(git rev-parse :one) && + test "$patched" = "$(remove_cr <one | git hash-object --stdin)" || { echo "Eh? apply with --index" false } diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index b92e6cb046..f890c54d13 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -190,8 +190,6 @@ test_expect_success 'required filter clean failure' ' test_must_fail git add test.fc ' -test -n "$GIT_TEST_LONG" && test_set_prereq EXPENSIVE - test_expect_success EXPENSIVE 'filter large file' ' git config filter.largefile.smudge cat && git config filter.largefile.clean cat && diff --git a/t/t0025-crlf-auto.sh b/t/t0025-crlf-auto.sh index f5f67a6337..28102de1a0 100755 --- a/t/t0025-crlf-auto.sh +++ b/t/t0025-crlf-auto.sh @@ -19,9 +19,9 @@ test_expect_success setup ' git commit -m initial && - one=`git rev-parse HEAD:one` && - two=`git rev-parse HEAD:two` && - three=`git rev-parse HEAD:three` && + one=$(git rev-parse HEAD:one) && + two=$(git rev-parse HEAD:two) && + three=$(git rev-parse HEAD:three) && echo happy. ' @@ -33,10 +33,10 @@ test_expect_success 'default settings cause no changes' ' ! has_cr one && has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - threediff=`git diff three` && - test -z "$onediff" -a -z "$twodiff" -a -z "$threediff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + threediff=$(git diff three) && + test -z "$onediff" && test -z "$twodiff" && test -z "$threediff" ' test_expect_success 'crlf=true causes a CRLF file to be normalized' ' @@ -48,7 +48,7 @@ test_expect_success 'crlf=true causes a CRLF file to be normalized' ' # Note, "normalized" means that git will normalize it if added has_cr two && - twodiff=`git diff two` && + twodiff=$(git diff two) && test -n "$twodiff" ' @@ -60,7 +60,7 @@ test_expect_success 'text=true causes a CRLF file to be normalized' ' # Note, "normalized" means that git will normalize it if added has_cr two && - twodiff=`git diff two` && + twodiff=$(git diff two) && test -n "$twodiff" ' @@ -72,7 +72,7 @@ test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=false' git read-tree --reset -u HEAD && has_cr one && - onediff=`git diff one` && + onediff=$(git diff one) && test -z "$onediff" ' @@ -84,7 +84,7 @@ test_expect_success 'eol=crlf gives a normalized file CRLFs with autocrlf=input' git read-tree --reset -u HEAD && has_cr one && - onediff=`git diff one` && + onediff=$(git diff one) && test -z "$onediff" ' @@ -96,7 +96,7 @@ test_expect_success 'eol=lf gives a normalized file LFs with autocrlf=true' ' git read-tree --reset -u HEAD && ! has_cr one && - onediff=`git diff one` && + onediff=$(git diff one) && test -z "$onediff" ' @@ -108,10 +108,10 @@ test_expect_success 'autocrlf=true does not normalize CRLF files' ' has_cr one && has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - threediff=`git diff three` && - test -z "$onediff" -a -z "$twodiff" -a -z "$threediff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + threediff=$(git diff three) && + test -z "$onediff" && test -z "$twodiff" && test -z "$threediff" ' test_expect_success 'text=auto, autocrlf=true _does_ normalize CRLF files' ' @@ -123,10 +123,10 @@ test_expect_success 'text=auto, autocrlf=true _does_ normalize CRLF files' ' has_cr one && has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - threediff=`git diff three` && - test -z "$onediff" -a -n "$twodiff" -a -z "$threediff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + threediff=$(git diff three) && + test -z "$onediff" && test -n "$twodiff" && test -z "$threediff" ' test_expect_success 'text=auto, autocrlf=true does not normalize binary files' ' @@ -137,7 +137,7 @@ test_expect_success 'text=auto, autocrlf=true does not normalize binary files' ' git read-tree --reset -u HEAD && ! has_cr three && - threediff=`git diff three` && + threediff=$(git diff three) && test -z "$threediff" ' @@ -148,7 +148,7 @@ test_expect_success 'eol=crlf _does_ normalize binary files' ' git read-tree --reset -u HEAD && has_cr three && - threediff=`git diff three` && + threediff=$(git diff three) && test -z "$threediff" ' diff --git a/t/t0026-eol-config.sh b/t/t0026-eol-config.sh index fe0164be62..4807b0f015 100755 --- a/t/t0026-eol-config.sh +++ b/t/t0026-eol-config.sh @@ -20,8 +20,8 @@ test_expect_success setup ' git commit -m initial && - one=`git rev-parse HEAD:one` && - two=`git rev-parse HEAD:two` && + one=$(git rev-parse HEAD:one) && + two=$(git rev-parse HEAD:two) && echo happy. ' @@ -34,9 +34,9 @@ test_expect_success 'eol=lf puts LFs in normalized file' ' ! has_cr one && ! has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_expect_success 'eol=crlf puts CRLFs in normalized file' ' @@ -47,9 +47,9 @@ test_expect_success 'eol=crlf puts CRLFs in normalized file' ' has_cr one && ! has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_expect_success 'autocrlf=true overrides eol=lf' ' @@ -61,9 +61,9 @@ test_expect_success 'autocrlf=true overrides eol=lf' ' has_cr one && has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_expect_success 'autocrlf=true overrides unset eol' ' @@ -75,9 +75,9 @@ test_expect_success 'autocrlf=true overrides unset eol' ' has_cr one && has_cr two && - onediff=`git diff one` && - twodiff=`git diff two` && - test -z "$onediff" -a -z "$twodiff" + onediff=$(git diff one) && + twodiff=$(git diff two) && + test -z "$onediff" && test -z "$twodiff" ' test_done diff --git a/t/t0030-stripspace.sh b/t/t0030-stripspace.sh index a8e84d8546..0333dd9875 100755 --- a/t/t0030-stripspace.sh +++ b/t/t0030-stripspace.sh @@ -225,22 +225,22 @@ test_expect_success \ test_expect_success \ 'text without newline at end should end with newline' ' - test `printf "$ttt" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$ttt" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$ttt$ttt" | git stripspace | wc -l` -gt 0 + test $(printf "$ttt" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$ttt" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$ttt$ttt" | git stripspace | wc -l) -gt 0 ' # text plus spaces at the end: test_expect_success \ 'text plus spaces without newline at end should end with newline' ' - test `printf "$ttt$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$ttt$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$sss$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$ttt$sss$sss" | git stripspace | wc -l` -gt 0 && - test `printf "$ttt$sss$sss$sss" | git stripspace | wc -l` -gt 0 + test $(printf "$ttt$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$ttt$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$sss$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$ttt$sss$sss" | git stripspace | wc -l) -gt 0 && + test $(printf "$ttt$sss$sss$sss" | git stripspace | wc -l) -gt 0 ' test_expect_success \ diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index 538ea5fb1c..57ea5a10c5 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -6,7 +6,7 @@ test_description='basic credential helper tests' test_expect_success 'setup helper scripts' ' cat >dump <<-\EOF && - whoami=`echo $0 | sed s/.*git-credential-//` + whoami=$(echo $0 | sed s/.*git-credential-//) echo >&2 "$whoami: $*" OIFS=$IFS IFS== diff --git a/t/t1000-read-tree-m-3way.sh b/t/t1000-read-tree-m-3way.sh index babcdd2343..a0b79b4839 100755 --- a/t/t1000-read-tree-m-3way.sh +++ b/t/t1000-read-tree-m-3way.sh @@ -519,10 +519,10 @@ test_expect_success \ 'rm -f .git/index F16 && echo F16 >F16 && git update-index --add F16 && - tree0=`git write-tree` && + tree0=$(git write-tree) && echo E16 >F16 && git update-index F16 && - tree1=`git write-tree` && + tree1=$(git write-tree) && read_tree_must_succeed -m $tree0 $tree1 $tree1 $tree0 && git ls-files --stage' diff --git a/t/t1001-read-tree-m-2way.sh b/t/t1001-read-tree-m-2way.sh index 3a24abf549..db1b6f5cf4 100755 --- a/t/t1001-read-tree-m-2way.sh +++ b/t/t1001-read-tree-m-2way.sh @@ -36,7 +36,7 @@ compare_change () { } check_cache_at () { - clean_if_empty=`git diff-files -- "$1"` + clean_if_empty=$(git diff-files -- "$1") case "$clean_if_empty" in '') echo "$1: clean" ;; ?*) echo "$1: dirty" ;; @@ -68,14 +68,14 @@ test_expect_success \ echo rezrov >rezrov && echo yomin >yomin && git update-index --add nitfol bozbar rezrov && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH && cat bozbar-new >bozbar && git update-index --add frotz bozbar --force-remove rezrov && git ls-files --stage >M.out && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && git diff-tree $treeH $treeM' @@ -315,7 +315,7 @@ test_expect_success \ 'rm -f .git/index && echo DF >DF && git update-index --add DF && - treeDF=`git write-tree` && + treeDF=$(git write-tree) && echo treeDF $treeDF && git ls-tree $treeDF && @@ -323,7 +323,7 @@ test_expect_success \ mkdir DF && echo DF/DF >DF/DF && git update-index --add --remove DF DF/DF && - treeDFDF=`git write-tree` && + treeDFDF=$(git write-tree) && echo treeDFDF $treeDFDF && git ls-tree $treeDFDF && git ls-files --stage >DFDF.out' @@ -345,7 +345,7 @@ test_expect_success \ 'rm -f .git/index && : >a && git update-index --add a && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && git ls-files --stage >treeM.out && @@ -354,7 +354,7 @@ test_expect_success \ git update-index --remove a && mkdir a && : >a/b && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH' @@ -372,7 +372,7 @@ test_expect_success \ mkdir c && : >c/d && git update-index --add a c/d && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && git ls-files --stage >treeM.out && @@ -381,7 +381,7 @@ test_expect_success \ mkdir a && : >a/b && git update-index --add --remove a a/b && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH' diff --git a/t/t1002-read-tree-m-u-2way.sh b/t/t1002-read-tree-m-u-2way.sh index a847709a13..fed877b20f 100755 --- a/t/t1002-read-tree-m-u-2way.sh +++ b/t/t1002-read-tree-m-u-2way.sh @@ -21,7 +21,7 @@ compare_change () { } check_cache_at () { - clean_if_empty=`git diff-files -- "$1"` + clean_if_empty=$(git diff-files -- "$1") case "$clean_if_empty" in '') echo "$1: clean" ;; ?*) echo "$1: dirty" ;; @@ -41,14 +41,14 @@ test_expect_success \ echo bozbar >bozbar && echo rezrov >rezrov && git update-index --add nitfol bozbar rezrov && - treeH=`git write-tree` && + treeH=$(git write-tree) && echo treeH $treeH && git ls-tree $treeH && echo gnusto >bozbar && git update-index --add frotz bozbar --force-remove rezrov && git ls-files --stage >M.out && - treeM=`git write-tree` && + treeM=$(git write-tree) && echo treeM $treeM && git ls-tree $treeM && sum bozbar frotz nitfol >M.sum && @@ -318,7 +318,7 @@ test_expect_success \ 'rm -f .git/index && echo DF >DF && git update-index --add DF && - treeDF=`git write-tree` && + treeDF=$(git write-tree) && echo treeDF $treeDF && git ls-tree $treeDF && @@ -326,7 +326,7 @@ test_expect_success \ mkdir DF && echo DF/DF >DF/DF && git update-index --add --remove DF DF/DF && - treeDFDF=`git write-tree` && + treeDFDF=$(git write-tree) && echo treeDFDF $treeDFDF && git ls-tree $treeDFDF && git ls-files --stage >DFDF.out' diff --git a/t/t1003-read-tree-prefix.sh b/t/t1003-read-tree-prefix.sh index 8c6d67edda..b6111cd150 100755 --- a/t/t1003-read-tree-prefix.sh +++ b/t/t1003-read-tree-prefix.sh @@ -11,7 +11,7 @@ test_description='git read-tree --prefix test. test_expect_success setup ' echo hello >one && git update-index --add one && - tree=`git write-tree` && + tree=$(git write-tree) && echo tree is $tree ' diff --git a/t/t1004-read-tree-m-u-wf.sh b/t/t1004-read-tree-m-u-wf.sh index 3e72aff470..c70cf42300 100755 --- a/t/t1004-read-tree-m-u-wf.sh +++ b/t/t1004-read-tree-m-u-wf.sh @@ -30,7 +30,7 @@ test_expect_success 'two-way not clobbering' ' echo >file2 master creates untracked file2 && echo >subdir/file2 master creates untracked subdir/file2 && - if err=`read_tree_u_must_succeed -m -u master side 2>&1` + if err=$(read_tree_u_must_succeed -m -u master side 2>&1) then echo should have complained false @@ -43,7 +43,7 @@ echo file2 >.gitignore test_expect_success 'two-way with incorrect --exclude-per-directory (1)' ' - if err=`read_tree_u_must_succeed -m --exclude-per-directory=.gitignore master side 2>&1` + if err=$(read_tree_u_must_succeed -m --exclude-per-directory=.gitignore master side 2>&1) then echo should have complained false @@ -54,7 +54,7 @@ test_expect_success 'two-way with incorrect --exclude-per-directory (1)' ' test_expect_success 'two-way with incorrect --exclude-per-directory (2)' ' - if err=`read_tree_u_must_succeed -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore master side 2>&1` + if err=$(read_tree_u_must_succeed -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore master side 2>&1) then echo should have complained false @@ -95,7 +95,7 @@ test_expect_success 'three-way not clobbering a working tree file' ' git checkout master && echo >file3 file three created in master, untracked && echo >subdir/file3 file three created in master, untracked && - if err=`read_tree_u_must_succeed -m -u branch-point master side 2>&1` + if err=$(read_tree_u_must_succeed -m -u branch-point master side 2>&1) then echo should have complained false diff --git a/t/t1020-subdirectory.sh b/t/t1020-subdirectory.sh index 6902320e81..62c0d25af4 100755 --- a/t/t1020-subdirectory.sh +++ b/t/t1020-subdirectory.sh @@ -20,27 +20,27 @@ test_expect_success setup ' test_expect_success 'update-index and ls-files' ' git update-index --add one && - case "`git ls-files`" in + case "$(git ls-files)" in one) echo pass one ;; *) echo bad one; exit 1 ;; esac && ( cd dir && git update-index --add two && - case "`git ls-files`" in + case "$(git ls-files)" in two) echo pass two ;; *) echo bad two; exit 1 ;; esac ) && - case "`git ls-files`" in + case "$(git ls-files)" in dir/two"$LF"one) echo pass both ;; *) echo bad; exit 1 ;; esac ' test_expect_success 'cat-file' ' - two=`git ls-files -s dir/two` && - two=`expr "$two" : "[0-7]* \\([0-9a-f]*\\)"` && + two=$(git ls-files -s dir/two) && + two=$(expr "$two" : "[0-7]* \\([0-9a-f]*\\)") && echo "$two" && git cat-file -p "$two" >actual && cmp dir/two actual && @@ -55,18 +55,18 @@ rm -f actual dir/actual test_expect_success 'diff-files' ' echo a >>one && echo d >>dir/two && - case "`git diff-files --name-only`" in + case "$(git diff-files --name-only)" in dir/two"$LF"one) echo pass top ;; *) echo bad top; exit 1 ;; esac && # diff should not omit leading paths ( cd dir && - case "`git diff-files --name-only`" in + case "$(git diff-files --name-only)" in dir/two"$LF"one) echo pass subdir ;; *) echo bad subdir; exit 1 ;; esac && - case "`git diff-files --name-only .`" in + case "$(git diff-files --name-only .)" in dir/two) echo pass subdir limited ;; *) echo bad subdir limited; exit 1 ;; esac @@ -74,11 +74,11 @@ test_expect_success 'diff-files' ' ' test_expect_success 'write-tree' ' - top=`git write-tree` && + top=$(git write-tree) && echo $top && ( cd dir && - sub=`git write-tree` && + sub=$(git write-tree) && echo $sub && test "z$top" = "z$sub" ) @@ -96,7 +96,7 @@ test_expect_success 'checkout-index' ' test_expect_success 'read-tree' ' rm -f one dir/two && - tree=`git write-tree` && + tree=$(git write-tree) && read_tree_u_must_succeed --reset -u "$tree" && cmp one original.one && cmp dir/two original.two && diff --git a/t/t1050-large.sh b/t/t1050-large.sh index fd10528009..aea493646e 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -131,7 +131,7 @@ test_expect_success 'git-show a large file' ' ' test_expect_success 'index-pack' ' - git clone file://"`pwd`"/.git foo && + git clone file://"$(pwd)"/.git foo && GIT_DIR=non-existent git index-pack --strict --verify foo/.git/objects/pack/*.pack ' @@ -140,7 +140,7 @@ test_expect_success 'repack' ' ' test_expect_success 'pack-objects with large loose object' ' - SHA1=`git hash-object huge` && + SHA1=$(git hash-object huge) && test_create_repo loose && echo $SHA1 | git pack-objects --stdout | GIT_ALLOC_LIMIT=0 GIT_DIR=loose/.git git unpack-objects && diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh index 58cd5435be..3f80ff0c14 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-repo-config.sh @@ -1158,4 +1158,14 @@ test_expect_failure 'adding a key into an empty section reuses header' ' test_cmp expect .git/config ' +test_expect_success POSIXPERM,PERL 'preserves existing permissions' ' + chmod 0600 .git/config && + git config imap.pass Hunter2 && + perl -e \ + "die q(badset) if ((stat(q(.git/config)))[2] & 07777) != 0600" && + git config --rename-section imap pop && + perl -e \ + "die q(badrename) if ((stat(q(.git/config)))[2] & 07777) != 0600" +' + test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index e130c528fe..0218e96366 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -235,7 +235,7 @@ test_expect_success \ 'rm -f o e && git rev-parse --verify "master@{2005-05-26 23:33:01}" >o 2>e && test '"$B"' = $(cat o) && - test "warning: Log .git/logs/'"$m has gap after $gd"'." = "$(cat e)"' + test "warning: Log for ref '"$m has gap after $gd"'." = "$(cat e)"' test_expect_success \ 'Query "master@{2005-05-26 23:38:00}" (middle of history)' \ 'rm -f o e && @@ -253,7 +253,7 @@ test_expect_success \ 'rm -f o e && git rev-parse --verify "master@{2005-05-28}" >o 2>e && test '"$D"' = $(cat o) && - test "warning: Log .git/logs/'"$m unexpectedly ended on $ld"'." = "$(cat e)"' + test "warning: Log for ref '"$m unexpectedly ended on $ld"'." = "$(cat e)"' rm -f .git/$m .git/logs/$m expect @@ -350,22 +350,28 @@ test_expect_success 'stdin fails on unknown command' ' grep "fatal: unknown command: unknown $a" err ' -test_expect_success 'stdin fails on badly quoted input' ' +test_expect_success 'stdin fails on unbalanced quotes' ' echo "create $a \"master" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && grep "fatal: badly quoted argument: \\\"master" err ' -test_expect_success 'stdin fails on arguments not separated by space' ' +test_expect_success 'stdin fails on invalid escape' ' + echo "create $a \"ma\zter\"" >stdin && + test_must_fail git update-ref --stdin <stdin 2>err && + grep "fatal: badly quoted argument: \\\"ma\\\\zter\\\"" err +' + +test_expect_success 'stdin fails on junk after quoted argument' ' echo "create \"$a\"master" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: expected SP but got: master" err + grep "fatal: unexpected character after quoted argument: \\\"$a\\\"master" err ' test_expect_success 'stdin fails create with no ref' ' echo "create " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create line missing <ref>" err + grep "fatal: create: missing <ref>" err ' test_expect_success 'stdin fails create with bad ref name' ' @@ -377,19 +383,19 @@ test_expect_success 'stdin fails create with bad ref name' ' test_expect_success 'stdin fails create with no new value' ' echo "create $a" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create $a missing <newvalue>" err + grep "fatal: create $a: missing <newvalue>" err ' test_expect_success 'stdin fails create with too many arguments' ' echo "create $a $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create $a has extra input: $m" err + grep "fatal: create $a: extra input: $m" err ' test_expect_success 'stdin fails update with no ref' ' echo "update " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: update line missing <ref>" err + grep "fatal: update: missing <ref>" err ' test_expect_success 'stdin fails update with bad ref name' ' @@ -401,19 +407,19 @@ test_expect_success 'stdin fails update with bad ref name' ' test_expect_success 'stdin fails update with no new value' ' echo "update $a" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: update $a missing <newvalue>" err + grep "fatal: update $a: missing <newvalue>" err ' test_expect_success 'stdin fails update with too many arguments' ' echo "update $a $m $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: update $a has extra input: $m" err + grep "fatal: update $a: extra input: $m" err ' test_expect_success 'stdin fails delete with no ref' ' echo "delete " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: delete line missing <ref>" err + grep "fatal: delete: missing <ref>" err ' test_expect_success 'stdin fails delete with bad ref name' ' @@ -425,13 +431,13 @@ test_expect_success 'stdin fails delete with bad ref name' ' test_expect_success 'stdin fails delete with too many arguments' ' echo "delete $a $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: delete $a has extra input: $m" err + grep "fatal: delete $a: extra input: $m" err ' test_expect_success 'stdin fails verify with too many arguments' ' echo "verify $a $m $m" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: verify $a has extra input: $m" err + grep "fatal: verify $a: extra input: $m" err ' test_expect_success 'stdin fails option with unknown name' ' @@ -458,6 +464,24 @@ test_expect_success 'stdin create ref works' ' test_cmp expect actual ' +test_expect_success 'stdin succeeds with quoted argument' ' + git update-ref -d $a && + echo "create $a \"$m\"" >stdin && + git update-ref --stdin <stdin && + git rev-parse $m >expect && + git rev-parse $a >actual && + test_cmp expect actual +' + +test_expect_success 'stdin succeeds with escaped character' ' + git update-ref -d $a && + echo "create $a \"ma\\163ter\"" >stdin && + git update-ref --stdin <stdin && + git rev-parse $m >expect && + git rev-parse $a >actual && + test_cmp expect actual +' + test_expect_success 'stdin update ref creates with zero old value' ' echo "update $b $m $Z" >stdin && git update-ref --stdin <stdin && @@ -494,21 +518,21 @@ test_expect_success 'stdin update ref fails with wrong old value' ' test_expect_success 'stdin update ref fails with bad old value' ' echo "update $c $m does-not-exist" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: invalid old value for ref $c: does-not-exist" err && + grep "fatal: update $c: invalid <oldvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' test_expect_success 'stdin create ref fails with bad new value' ' echo "create $c does-not-exist" >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: invalid new value for ref $c: does-not-exist" err && + grep "fatal: create $c: invalid <newvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' test_expect_success 'stdin create ref fails with zero new value' ' echo "create $c " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: create $c given zero new value" err && + grep "fatal: create $c: zero <newvalue>" err && test_must_fail git rev-parse --verify -q $c ' @@ -532,7 +556,7 @@ test_expect_success 'stdin delete ref fails with wrong old value' ' test_expect_success 'stdin delete ref fails with zero old value' ' echo "delete $a " >stdin && test_must_fail git update-ref --stdin <stdin 2>err && - grep "fatal: delete $a given zero old value" err && + grep "fatal: delete $a: zero <oldvalue>" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual @@ -673,7 +697,7 @@ test_expect_success 'stdin -z fails on unknown command' ' test_expect_success 'stdin -z fails create with no ref' ' printf $F "create " >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: create line missing <ref>" err + grep "fatal: create: missing <ref>" err ' test_expect_success 'stdin -z fails create with bad ref name' ' @@ -685,7 +709,7 @@ test_expect_success 'stdin -z fails create with bad ref name' ' test_expect_success 'stdin -z fails create with no new value' ' printf $F "create $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: create $a missing <newvalue>" err + grep "fatal: create $a: unexpected end of input when reading <newvalue>" err ' test_expect_success 'stdin -z fails create with too many arguments' ' @@ -697,25 +721,39 @@ test_expect_success 'stdin -z fails create with too many arguments' ' test_expect_success 'stdin -z fails update with no ref' ' printf $F "update " >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: update line missing <ref>" err + grep "fatal: update: missing <ref>" err +' + +test_expect_success 'stdin -z fails update with too few args' ' + printf $F "update $a" "$m" >stdin && + test_must_fail git update-ref -z --stdin <stdin 2>err && + grep "fatal: update $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails update with bad ref name' ' - printf $F "update ~a" "$m" >stdin && + printf $F "update ~a" "$m" "" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && grep "fatal: invalid ref format: ~a" err ' +test_expect_success 'stdin -z emits warning with empty new value' ' + git update-ref $a $m && + printf $F "update $a" "" "" >stdin && + git update-ref -z --stdin <stdin 2>err && + grep "warning: update $a: missing <newvalue>, treating as zero" err && + test_must_fail git rev-parse --verify -q $a +' + test_expect_success 'stdin -z fails update with no new value' ' printf $F "update $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: update $a missing <newvalue>" err + grep "fatal: update $a: unexpected end of input when reading <newvalue>" err ' test_expect_success 'stdin -z fails update with no old value' ' printf $F "update $a" "$m" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: update $a missing \\[<oldvalue>\\] NUL" err + grep "fatal: update $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails update with too many arguments' ' @@ -727,7 +765,7 @@ test_expect_success 'stdin -z fails update with too many arguments' ' test_expect_success 'stdin -z fails delete with no ref' ' printf $F "delete " >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: delete line missing <ref>" err + grep "fatal: delete: missing <ref>" err ' test_expect_success 'stdin -z fails delete with bad ref name' ' @@ -739,7 +777,7 @@ test_expect_success 'stdin -z fails delete with bad ref name' ' test_expect_success 'stdin -z fails delete with no old value' ' printf $F "delete $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: delete $a missing \\[<oldvalue>\\] NUL" err + grep "fatal: delete $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails delete with too many arguments' ' @@ -757,7 +795,7 @@ test_expect_success 'stdin -z fails verify with too many arguments' ' test_expect_success 'stdin -z fails verify with no old value' ' printf $F "verify $a" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: verify $a missing \\[<oldvalue>\\] NUL" err + grep "fatal: verify $a: unexpected end of input when reading <oldvalue>" err ' test_expect_success 'stdin -z fails option with unknown name' ' @@ -816,7 +854,7 @@ test_expect_success 'stdin -z update ref fails with wrong old value' ' test_expect_success 'stdin -z update ref fails with bad old value' ' printf $F "update $c" "$m" "does-not-exist" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: invalid old value for ref $c: does-not-exist" err && + grep "fatal: update $c: invalid <oldvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' @@ -834,14 +872,14 @@ test_expect_success 'stdin -z create ref fails with bad new value' ' git update-ref -d "$c" && printf $F "create $c" "does-not-exist" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: invalid new value for ref $c: does-not-exist" err && + grep "fatal: create $c: invalid <newvalue>: does-not-exist" err && test_must_fail git rev-parse --verify -q $c ' -test_expect_success 'stdin -z create ref fails with zero new value' ' +test_expect_success 'stdin -z create ref fails with empty new value' ' printf $F "create $c" "" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: create $c given zero new value" err && + grep "fatal: create $c: missing <newvalue>" err && test_must_fail git rev-parse --verify -q $c ' @@ -865,7 +903,7 @@ test_expect_success 'stdin -z delete ref fails with wrong old value' ' test_expect_success 'stdin -z delete ref fails with zero old value' ' printf $F "delete $a" "$Z" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && - grep "fatal: delete $a given zero old value" err && + grep "fatal: delete $a: zero <oldvalue>" err && git rev-parse $m >expect && git rev-parse $a >actual && test_cmp expect actual @@ -923,7 +961,7 @@ test_expect_success 'stdin -z update refs works with identity updates' ' test_expect_success 'stdin -z update refs fails with wrong old value' ' git update-ref $c $m && - printf $F "update $a" "$m" "$m" "update $b" "$m" "$m" "update $c" "" "$Z" >stdin && + printf $F "update $a" "$m" "$m" "update $b" "$m" "$m" "update $c" "$m" "$Z" >stdin && test_must_fail git update-ref -z --stdin <stdin 2>err && grep "fatal: Cannot lock the ref '"'"'$c'"'"'" err && git rev-parse $m >expect && diff --git a/t/t1402-check-ref-format.sh b/t/t1402-check-ref-format.sh index 1a5a5f39fd..9aeb352b3d 100755 --- a/t/t1402-check-ref-format.sh +++ b/t/t1402-check-ref-format.sh @@ -64,6 +64,7 @@ valid_ref "$(printf 'heads/fu\303\237')" invalid_ref 'heads/*foo/bar' --refspec-pattern invalid_ref 'heads/foo*/bar' --refspec-pattern invalid_ref 'heads/f*o/bar' --refspec-pattern +invalid_ref 'heads/foo*//bar' --refspec-pattern ref='foo' invalid_ref "$ref" @@ -128,6 +129,20 @@ valid_ref NOT_MINGW "$ref" '--allow-onelevel --normalize' invalid_ref NOT_MINGW "$ref" '--refspec-pattern --normalize' valid_ref NOT_MINGW "$ref" '--refspec-pattern --allow-onelevel --normalize' + +valid_ref 'refs/heads/a-very-long-refname' +invalid_ref 'refs/heads/.a-very-long-refname' +invalid_ref 'refs/heads/abcdefgh0123..' +invalid_ref 'refs/heads/abcdefgh01234..' +invalid_ref 'refs/heads/abcdefgh012345..' +invalid_ref 'refs/heads/abcdefgh0123456..' +invalid_ref 'refs/heads/abcdefgh01234567..' +valid_ref 'refs/heads/abcdefgh0123.a' +valid_ref 'refs/heads/abcdefgh01234.a' +valid_ref 'refs/heads/abcdefgh012345.a' +valid_ref 'refs/heads/abcdefgh0123456.a' +valid_ref 'refs/heads/abcdefgh01234567.a' + test_expect_success "check-ref-format --branch @{-1}" ' T=$(git write-tree) && sha1=$(echo A | git commit-tree $T) && diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 236b13a3ab..8cab06f90a 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -245,4 +245,12 @@ test_expect_success 'gc.reflogexpire=false' ' ' +test_expect_success 'checkout should not delete log for packed ref' ' + test $(git reflog master | wc -l) = 4 && + git branch foo && + git pack-refs --all && + git checkout foo && + test $(git reflog master | wc -l) = 4 +' + test_done diff --git a/t/t3032-merge-recursive-options.sh b/t/t3032-merge-recursive-options.sh index 5fd7bbb652..4029c9c8c0 100755 --- a/t/t3032-merge-recursive-options.sh +++ b/t/t3032-merge-recursive-options.sh @@ -14,7 +14,11 @@ test_description='merge-recursive options . ./test-lib.sh test_have_prereq SED_STRIPS_CR && SED_OPTIONS=-b -test_have_prereq GREP_STRIPS_CR && export GREP_OPTIONS=-U +if test_have_prereq GREP_STRIPS_CR +then + GREP_OPTIONS=-U + export GREP_OPTIONS +fi test_expect_success 'setup' ' conflict_hunks () { diff --git a/t/t3302-notes-index-expensive.sh b/t/t3302-notes-index-expensive.sh index e35d7811ac..8d44e04354 100755 --- a/t/t3302-notes-index-expensive.sh +++ b/t/t3302-notes-index-expensive.sh @@ -7,9 +7,7 @@ test_description='Test commit notes index (expensive!)' . ./test-lib.sh -test_set_prereq NOT_EXPENSIVE test -n "$GIT_NOTES_TIMING_TESTS" && test_set_prereq EXPENSIVE -test -x /usr/bin/time && test_set_prereq USR_BIN_TIME create_repo () { number_of_commits=$1 @@ -17,43 +15,43 @@ create_repo () { test -d .git || { git init && ( - while [ $nr -lt $number_of_commits ]; do + while test $nr -lt $number_of_commits + do nr=$(($nr+1)) mark=$(($nr+$nr)) notemark=$(($mark+1)) test_tick && - cat <<INPUT_END && -commit refs/heads/master -mark :$mark -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -commit #$nr -COMMIT - -M 644 inline file -data <<EOF -file in commit #$nr -EOF - -blob -mark :$notemark -data <<EOF -note for commit #$nr -EOF - -INPUT_END - - echo "N :$notemark :$mark" >> note_commit + cat <<-INPUT_END && + commit refs/heads/master + mark :$mark + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + commit #$nr + COMMIT + + M 644 inline file + data <<EOF + file in commit #$nr + EOF + + blob + mark :$notemark + data <<EOF + note for commit #$nr + EOF + + INPUT_END + echo "N :$notemark :$mark" >>note_commit done && test_tick && - cat <<INPUT_END && -commit refs/notes/commits -committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE -data <<COMMIT -notes -COMMIT + cat <<-INPUT_END && + commit refs/notes/commits + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data <<COMMIT + notes + COMMIT -INPUT_END + INPUT_END cat note_commit ) | @@ -65,62 +63,74 @@ INPUT_END test_notes () { count=$1 && git config core.notesRef refs/notes/commits && - git log | grep "^ " > output && + git log | grep "^ " >output && i=$count && - while [ $i -gt 0 ]; do + while test $i -gt 0 + do echo " commit #$i" && echo " note for commit #$i" && - i=$(($i-1)); - done > expect && + i=$(($i-1)) + done >expect && test_cmp expect output } -cat > time_notes << \EOF +write_script time_notes <<\EOF mode=$1 i=1 - while [ $i -lt $2 ]; do + while test $i -lt $2 + do case $1 in no-notes) - GIT_NOTES_REF=non-existing; export GIT_NOTES_REF - ;; + GIT_NOTES_REF=non-existing + export GIT_NOTES_REF + ;; notes) unset GIT_NOTES_REF - ;; + ;; esac - git log >/dev/null + git log i=$(($i+1)) - done + done >/dev/null EOF time_notes () { for mode in no-notes notes do echo $mode - /usr/bin/time "$SHELL_PATH" ../time_notes $mode $1 + /usr/bin/time ../time_notes $mode $1 done } do_tests () { - pr=$1 - count=$2 - - test_expect_success $pr 'setup / mkdir' ' - mkdir $count && - cd $count + count=$1 pr=${2-} + + test_expect_success $pr "setup $count" ' + mkdir "$count" && + ( + cd "$count" && + create_repo "$count" + ) ' - test_expect_success $pr "setup $count" "create_repo $count" - - test_expect_success $pr 'notes work' "test_notes $count" - - test_expect_success USR_BIN_TIME,$pr 'notes timing with /usr/bin/time' "time_notes 100" + test_expect_success $pr 'notes work' ' + ( + cd "$count" && + test_notes "$count" + ) + ' - test_expect_success $pr 'teardown / cd ..' 'cd ..' + test_expect_success "USR_BIN_TIME${pr:+,$pr}" 'notes timing with /usr/bin/time' ' + ( + cd "$count" && + time_notes 100 + ) + ' } -do_tests NOT_EXPENSIVE 10 -for count in 100 1000 10000; do - do_tests EXPENSIVE $count +do_tests 10 +for count in 100 1000 10000 +do + do_tests "$count" EXPENSIVE done test_done diff --git a/t/t3402-rebase-merge.sh b/t/t3402-rebase-merge.sh index be8c1d5ef9..5a27ec9b5e 100755 --- a/t/t3402-rebase-merge.sh +++ b/t/t3402-rebase-merge.sh @@ -33,6 +33,7 @@ test_expect_success setup ' tr "[a-z]" "[A-Z]" <original >newfile && git add newfile && git commit -a -m"side edits further." && + git branch second-side && tr "[a-m]" "[A-M]" <original >newfile && rm -f original && @@ -41,6 +42,7 @@ test_expect_success setup ' git branch test-rebase side && git branch test-rebase-pick side && git branch test-reference-pick side && + git branch test-conflicts side && git checkout -b test-merge side ' @@ -138,4 +140,17 @@ test_expect_success 'rebase -s funny -Xopt' ' test -f funny.was.run ' +test_expect_success 'rebase --skip works with two conflicts in a row' ' + git checkout second-side && + tr "[A-Z]" "[a-z]" <newfile >tmp && + mv tmp newfile && + git commit -a -m"edit conflicting with side" && + tr "[d-f]" "[D-F]" <newfile >tmp && + mv tmp newfile && + git commit -a -m"another edit conflicting with side" && + test_must_fail git rebase --merge test-conflicts && + test_must_fail git rebase --skip && + git rebase --skip +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index c0023a5b4f..8197ed29a9 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -67,6 +67,14 @@ test_expect_success 'setup' ' SHELL= export SHELL +test_expect_success 'rebase --keep-empty' ' + git checkout -b emptybranch master && + git commit --allow-empty -m "empty" && + git rebase --keep-empty -i HEAD~2 && + git log --oneline >actual && + test_line_count = 6 actual +' + test_expect_success 'rebase -i with the exec command' ' git checkout master && ( diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh index e70ac10a0c..9292b499f3 100755 --- a/t/t3419-rebase-patch-id.sh +++ b/t/t3419-rebase-patch-id.sh @@ -4,12 +4,9 @@ test_description='git rebase - test patch id computation' . ./test-lib.sh -test_set_prereq NOT_EXPENSIVE test -n "$GIT_PATCHID_TIMING_TESTS" && test_set_prereq EXPENSIVE -test -x /usr/bin/time && test_set_prereq USR_BIN_TIME -count() -{ +count () { i=0 while test $i -lt $1 do @@ -18,8 +15,7 @@ count() done } -scramble() -{ +scramble () { i=0 while read x do @@ -28,12 +24,11 @@ scramble() echo "$x" fi i=$((($i+1) % 10)) - done < "$1" > "$1.new" + done <"$1" >"$1.new" mv -f "$1.new" "$1" } -run() -{ +run () { echo \$ "$@" /usr/bin/time "$@" >/dev/null } @@ -43,10 +38,8 @@ test_expect_success 'setup' ' git tag root ' -do_tests() -{ - pr=$1 - nlines=$2 +do_tests () { + nlines=$1 pr=${2-} test_expect_success $pr "setup: $nlines lines" " rm -f .gitattributes && @@ -103,7 +96,7 @@ do_tests() " } -do_tests NOT_EXPENSIVE 500 -do_tests EXPENSIVE 50000 +do_tests 500 +do_tests 50000 EXPENSIVE test_done diff --git a/t/t3508-cherry-pick-many-commits.sh b/t/t3508-cherry-pick-many-commits.sh index 19c99d7ef1..b457333e18 100755 --- a/t/t3508-cherry-pick-many-commits.sh +++ b/t/t3508-cherry-pick-many-commits.sh @@ -65,12 +65,15 @@ test_expect_success 'output to keep user entertained during multi-pick' ' cat <<-\EOF >expected && [master OBJID] second Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:14:13 2005 -0700 1 file changed, 1 insertion(+) [master OBJID] third Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 1 file changed, 1 insertion(+) [master OBJID] fourth Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 1 file changed, 1 insertion(+) EOF @@ -98,14 +101,17 @@ test_expect_success 'output during multi-pick indicates merge strategy' ' Trying simple merge. [master OBJID] second Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:14:13 2005 -0700 1 file changed, 1 insertion(+) Trying simple merge. [master OBJID] third Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 1 file changed, 1 insertion(+) Trying simple merge. [master OBJID] fourth Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 1 file changed, 1 insertion(+) EOF diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index a5e7e6b2ba..f372fc8ca8 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -96,8 +96,8 @@ test_expect_success 'stash pop after save --include-untracked leaves files untra git stash pop && git status --porcelain >actual && test_cmp expect actual && - test "1" = "`cat file2`" && - test untracked = "`cat untracked/untracked`" + test "1" = "$(cat file2)" && + test untracked = "$(cat untracked/untracked)" ' git clean --force --quiet -d diff --git a/t/t3910-mac-os-precompose.sh b/t/t3910-mac-os-precompose.sh index e4ba6013e4..831935665e 100755 --- a/t/t3910-mac-os-precompose.sh +++ b/t/t3910-mac-os-precompose.sh @@ -14,13 +14,13 @@ then fi # create utf-8 variables -Adiarnfc=`printf '\303\204'` -Adiarnfd=`printf 'A\314\210'` +Adiarnfc=$(printf '\303\204') +Adiarnfd=$(printf 'A\314\210') -Odiarnfc=`printf '\303\226'` -Odiarnfd=`printf 'O\314\210'` -AEligatu=`printf '\303\206'` -Invalidu=`printf '\303\377'` +Odiarnfc=$(printf '\303\226') +Odiarnfd=$(printf 'O\314\210') +AEligatu=$(printf '\303\206') +Invalidu=$(printf '\303\377') #Create a string with 255 bytes (decomposed) @@ -35,7 +35,7 @@ Alongc=$Alongc$Alongc$Alongc$Alongc$Alongc #250 Byte Alongc=$Alongc$AEligatu$AEligatu #254 Byte test_expect_success "detect if nfd needed" ' - precomposeunicode=`git config core.precomposeunicode` && + precomposeunicode=$(git config core.precomposeunicode) && test "$precomposeunicode" = true && git config core.precomposeunicode true ' @@ -140,13 +140,23 @@ test_expect_success "Add long precomposed filename" ' git add * && git commit -m "Long filename" ' + +test_expect_failure 'handle existing decomposed filenames' ' + echo content >"verbatim.$Adiarnfd" && + git -c core.precomposeunicode=false add "verbatim.$Adiarnfd" && + git commit -m "existing decomposed file" && + >expect && + git ls-files --exclude-standard -o "verbatim*" >untracked && + test_cmp expect untracked +' + # Test if the global core.precomposeunicode stops autosensing # Must be the last test case test_expect_success "respect git config --global core.precomposeunicode" ' git config --global core.precomposeunicode true && rm -rf .git && git init && - precomposeunicode=`git config core.precomposeunicode` && + precomposeunicode=$(git config core.precomposeunicode) && test "$precomposeunicode" = "true" ' diff --git a/t/t4006-diff-mode.sh b/t/t4006-diff-mode.sh index 05911492ca..76f643b2c2 100755 --- a/t/t4006-diff-mode.sh +++ b/t/t4006-diff-mode.sh @@ -13,7 +13,7 @@ sed_script='s/\(:100644 100755\) \('"$_x40"'\) \2 /\1 X X /' test_expect_success 'setup' ' echo frotz >rezrov && git update-index --add rezrov && - tree=`git write-tree` && + tree=$(git write-tree) && echo $tree ' diff --git a/t/t4010-diff-pathspec.sh b/t/t4010-diff-pathspec.sh index 2bb973655b..bf07841866 100755 --- a/t/t4010-diff-pathspec.sh +++ b/t/t4010-diff-pathspec.sh @@ -18,7 +18,7 @@ test_expect_success \ mkdir path1 && echo rezrov >path1/file1 && git update-index --add file0 path1/file1 && - tree=`git write-tree` && + tree=$(git write-tree) && echo "$tree" && echo nitfol >file0 && echo yomin >path1/file1 && @@ -131,7 +131,7 @@ test_expect_success 'diff multiple wildcard pathspecs' ' mkdir path2 && echo rezrov >path2/file1 && git update-index --add path2/file1 && - tree3=`git write-tree` && + tree3=$(git write-tree) && git diff --name-only $tree $tree3 -- "path2*1" "path1*1" >actual && cat <<-\EOF >expect && path1/file1 diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh index 1215ae544b..643d729157 100755 --- a/t/t4012-diff-binary.sh +++ b/t/t4012-diff-binary.sh @@ -67,18 +67,18 @@ test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' git diff >output && sed -e "s/-CIT/xCIT/" <output >broken && test_must_fail git apply --stat --summary broken 2>detected && - detected=`cat detected` && - detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && - detected=`sed -ne "${detected}p" broken` && + detected=$(cat detected) && + detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' test_expect_success C_LOCALE_OUTPUT 'apply detecting corrupt patch correctly' ' git diff --binary | sed -e "s/-CIT/xCIT/" >broken && test_must_fail git apply --stat --summary broken 2>detected && - detected=`cat detected` && - detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && - detected=`sed -ne "${detected}p" broken` && + detected=$(cat detected) && + detected=$(expr "$detected" : "fatal.*at line \\([0-9]*\\)\$") && + detected=$(sed -ne "${detected}p" broken) && test "$detected" = xCIT ' @@ -88,7 +88,7 @@ test_expect_success 'initial commit' 'git commit -a -m initial' test_expect_success 'diff-index with --binary' ' echo AIT >a && mv b e && echo CIT >c && cat e >d && git update-index --add --remove a b c d e && - tree0=`git write-tree` && + tree0=$(git write-tree) && git diff --cached --binary >current && git apply --stat --summary current ' @@ -96,7 +96,7 @@ test_expect_success 'diff-index with --binary' ' test_expect_success 'apply binary patch' ' git reset --hard && git apply --binary --index <current && - tree1=`git write-tree` && + tree1=$(git write-tree) && test "$tree1" = "$tree0" ' diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index e77c09c37e..805b055c89 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -107,14 +107,14 @@ test_expect_success setup ' +*++ [initial] Initial EOF -V=`git version | sed -e 's/^git version //' -e 's/\./\\./g'` +V=$(git version | sed -e 's/^git version //' -e 's/\./\\./g') while read cmd do case "$cmd" in '' | '#'*) continue ;; esac - test=`echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g'` - pfx=`printf "%04d" $test_count` + test=$(echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g') + pfx=$(printf "%04d" $test_count) expect="$TEST_DIRECTORY/t4013/diff.$test" actual="$pfx-diff.$test" diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 9c80633146..256affce89 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -43,7 +43,7 @@ test_expect_success setup ' test_expect_success "format-patch --ignore-if-in-upstream" ' git format-patch --stdout master..side >patch0 && - cnt=`grep "^From " patch0 | wc -l` && + cnt=$(grep "^From " patch0 | wc -l) && test $cnt = 3 ' @@ -52,7 +52,7 @@ test_expect_success "format-patch --ignore-if-in-upstream" ' git format-patch --stdout \ --ignore-if-in-upstream master..side >patch1 && - cnt=`grep "^From " patch1 | wc -l` && + cnt=$(grep "^From " patch1 | wc -l) && test $cnt = 2 ' @@ -69,7 +69,7 @@ test_expect_success "format-patch doesn't consider merge commits" ' git checkout -b merger master && test_tick && git merge --no-ff slave && - cnt=`git format-patch -3 --stdout | grep "^From " | wc -l` && + cnt=$(git format-patch -3 --stdout | grep "^From " | wc -l) && test $cnt = 3 ' @@ -77,7 +77,7 @@ test_expect_success "format-patch result applies" ' git checkout -b rebuild-0 master && git am -3 patch0 && - cnt=`git rev-list master.. | wc -l` && + cnt=$(git rev-list master.. | wc -l) && test $cnt = 2 ' @@ -85,7 +85,7 @@ test_expect_success "format-patch --ignore-if-in-upstream result applies" ' git checkout -b rebuild-1 master && git am -3 patch1 && - cnt=`git rev-list master.. | wc -l` && + cnt=$(git rev-list master.. | wc -l) && test $cnt = 2 ' @@ -762,6 +762,67 @@ test_expect_success 'format-patch --signature="" suppresses signatures' ' ! grep "^-- \$" output ' +test_expect_success 'prepare mail-signature input' ' + cat >mail-signature <<-\EOF + + Test User <test.email@kernel.org> + http://git.kernel.org/cgit/git/git.git + + git.kernel.org/?p=git/git.git;a=summary + + EOF +' + +test_expect_success '--signature-file=file works' ' + git format-patch --stdout --signature-file=mail-signature -1 >output && + check_patch output && + sed -e "1,/^-- \$/d" <output >actual && + { + cat mail-signature && echo + } >expect && + test_cmp expect actual +' + +test_expect_success 'format.signaturefile works' ' + test_config format.signaturefile mail-signature && + git format-patch --stdout -1 >output && + check_patch output && + sed -e "1,/^-- \$/d" <output >actual && + { + cat mail-signature && echo + } >expect && + test_cmp expect actual +' + +test_expect_success '--no-signature suppresses format.signaturefile ' ' + test_config format.signaturefile mail-signature && + git format-patch --stdout --no-signature -1 >output && + check_patch output && + ! grep "^-- \$" output +' + +test_expect_success '--signature-file overrides format.signaturefile' ' + cat >other-mail-signature <<-\EOF + Use this other signature instead of mail-signature. + EOF + test_config format.signaturefile mail-signature && + git format-patch --stdout \ + --signature-file=other-mail-signature -1 >output && + check_patch output && + sed -e "1,/^-- \$/d" <output >actual && + { + cat other-mail-signature && echo + } >expect && + test_cmp expect actual +' + +test_expect_success '--signature overrides format.signaturefile' ' + test_config format.signaturefile mail-signature && + git format-patch --stdout --signature="my sig" -1 >output && + check_patch output && + grep "my sig" output +' + test_expect_success TTY 'format-patch --stdout paginates' ' rm -f pager_used && test_terminal env GIT_PAGER="wc >pager_used" git format-patch --stdout --all && diff --git a/t/t4036-format-patch-signer-mime.sh b/t/t4036-format-patch-signer-mime.sh index ba43f18549..98d9713d8b 100755 --- a/t/t4036-format-patch-signer-mime.sh +++ b/t/t4036-format-patch-signer-mime.sh @@ -42,7 +42,7 @@ test_expect_success 'attach and signoff do not duplicate mime headers' ' GIT_COMMITTER_NAME="はまの ふにおう" \ git format-patch -s --stdout -1 --attach >output && - test `grep -ci ^MIME-Version: output` = 1 + test $(grep -ci ^MIME-Version: output) = 1 ' diff --git a/t/t4038-diff-combined.sh b/t/t4038-diff-combined.sh index 1019d7b35f..41913c3aa3 100755 --- a/t/t4038-diff-combined.sh +++ b/t/t4038-diff-combined.sh @@ -94,7 +94,7 @@ test_expect_success 'setup for --cc --raw' ' blob=$(echo file | git hash-object --stdin -w) && base_tree=$(echo "100644 blob $blob file" | git mktree) && trees= && - for i in `test_seq 1 40` + for i in $(test_seq 1 40) do blob=$(echo file$i | git hash-object --stdin -w) && trees="$trees$(echo "100644 blob $blob file" | git mktree)$LF" diff --git a/t/t4057-diff-combined-paths.sh b/t/t4057-diff-combined-paths.sh index 097e63215e..dff36b77ec 100755 --- a/t/t4057-diff-combined-paths.sh +++ b/t/t4057-diff-combined-paths.sh @@ -5,7 +5,7 @@ test_description='combined diff show only paths that are different to all parent . ./test-lib.sh # verify that diffc.expect matches output of -# `git diff -c --name-only HEAD HEAD^ HEAD^2` +# $(git diff -c --name-only HEAD HEAD^ HEAD^2) diffc_verify () { git diff -c --name-only HEAD HEAD^ HEAD^2 >diffc.actual && test_cmp diffc.expect diffc.actual diff --git a/t/t4102-apply-rename.sh b/t/t4102-apply-rename.sh index 49e2d6c349..fae305979a 100755 --- a/t/t4102-apply-rename.sh +++ b/t/t4102-apply-rename.sh @@ -52,6 +52,6 @@ EOF test_expect_success 'apply copy' \ 'git apply --index --stat --summary --apply test-patch && - test "$(cat bar)" = "This is bar" -a "$(cat foo)" = "This is foo"' + test "$(cat bar)" = "This is bar" && test "$(cat foo)" = "This is foo"' test_done diff --git a/t/t4116-apply-reverse.sh b/t/t4116-apply-reverse.sh index 1e4d4380bf..ce8567f496 100755 --- a/t/t4116-apply-reverse.sh +++ b/t/t4116-apply-reverse.sh @@ -30,10 +30,10 @@ test_expect_success setup ' test_expect_success 'apply in forward' ' - T0=`git rev-parse "second^{tree}"` && + T0=$(git rev-parse "second^{tree}") && git reset --hard initial && git apply --index --binary patch && - T1=`git write-tree` && + T1=$(git write-tree) && test "$T0" = "$T1" ' @@ -62,22 +62,22 @@ test_expect_success 'setup separate repository lacking postimage' ' test_expect_success 'apply in forward without postimage' ' - T0=`git rev-parse "second^{tree}"` && + T0=$(git rev-parse "second^{tree}") && ( cd initial && git apply --index --binary ../patch && - T1=`git write-tree` && + T1=$(git write-tree) && test "$T0" = "$T1" ) ' test_expect_success 'apply in reverse without postimage' ' - T0=`git rev-parse "initial^{tree}"` && + T0=$(git rev-parse "initial^{tree}") && ( cd second && git apply --index --binary --reverse ../patch && - T1=`git write-tree` && + T1=$(git write-tree) && test "$T0" = "$T1" ) ' diff --git a/t/t4119-apply-config.sh b/t/t4119-apply-config.sh index 3d0384daa8..c393be691b 100755 --- a/t/t4119-apply-config.sh +++ b/t/t4119-apply-config.sh @@ -68,7 +68,7 @@ test_expect_success 'apply --whitespace=strip from config' ' check_result sub/file1 ' -D=`pwd` +D=$(pwd) test_expect_success 'apply --whitespace=strip in subdir' ' diff --git a/t/t4204-patch-id.sh b/t/t4204-patch-id.sh index d2c930de87..baa9d3c82e 100755 --- a/t/t4204-patch-id.sh +++ b/t/t4204-patch-id.sh @@ -5,27 +5,44 @@ test_description='git patch-id' . ./test-lib.sh test_expect_success 'setup' ' - test_commit initial foo a && - test_commit first foo b && - git checkout -b same HEAD^ && - test_commit same-msg foo b && - git checkout -b notsame HEAD^ && - test_commit notsame-msg foo c + as="a a a a a a a a" && # eight a + test_write_lines $as >foo && + test_write_lines $as >bar && + git add foo bar && + git commit -a -m initial && + test_write_lines $as b >foo && + test_write_lines $as b >bar && + git commit -a -m first && + git checkout -b same master && + git commit --amend -m same-msg && + git checkout -b notsame master && + echo c >foo && + echo c >bar && + git commit --amend -a -m notsame-msg && + test_write_lines bar foo >bar-then-foo && + test_write_lines foo bar >foo-then-bar ' test_expect_success 'patch-id output is well-formed' ' - git log -p -1 | git patch-id > output && + git log -p -1 | git patch-id >output && grep "^[a-f0-9]\{40\} $(git rev-parse HEAD)$" output ' +#calculate patch id. Make sure output is not empty. calc_patch_id () { - git patch-id | - sed "s# .*##" > patch-id_"$1" + name="$1" + shift + git patch-id "$@" | + sed "s/ .*//" >patch-id_"$name" && + test_line_count -gt 0 patch-id_"$name" +} + +get_top_diff () { + git log -p -1 "$@" -O bar-then-foo -- } get_patch_id () { - git log -p -1 "$1" | git patch-id | - sed "s# .*##" > patch-id_"$1" + get_top_diff "$1" | calc_patch_id "$@" } test_expect_success 'patch-id detects equality' ' @@ -45,8 +62,8 @@ test_expect_success 'patch-id supports git-format-patch output' ' git checkout same && git format-patch -1 --stdout | calc_patch_id same && test_cmp patch-id_master patch-id_same && - set `git format-patch -1 --stdout | git patch-id` && - test "$2" = `git rev-parse HEAD` + set $(git format-patch -1 --stdout | git patch-id) && + test "$2" = $(git rev-parse HEAD) ' test_expect_success 'whitespace is irrelevant in footer' ' @@ -56,6 +73,69 @@ test_expect_success 'whitespace is irrelevant in footer' ' test_cmp patch-id_master patch-id_same ' +cmp_patch_id () { + if + test "$1" = "relevant" + then + ! test_cmp patch-id_"$2" patch-id_"$3" + else + test_cmp patch-id_"$2" patch-id_"$3" + fi +} + +test_patch_id_file_order () { + relevant="$1" + shift + name="order-${1}-$relevant" + shift + get_top_diff "master" | calc_patch_id "$name" "$@" && + git checkout same && + git format-patch -1 --stdout -O foo-then-bar | + calc_patch_id "ordered-$name" "$@" && + cmp_patch_id $relevant "$name" "ordered-$name" + +} + +# combined test for options: add more tests here to make them +# run with all options +test_patch_id () { + test_patch_id_file_order "$@" +} + +# small tests with detailed diagnostic for basic options. +test_expect_success 'file order is irrelevant with --stable' ' + test_patch_id_file_order irrelevant --stable --stable +' + +test_expect_success 'file order is relevant with --unstable' ' + test_patch_id_file_order relevant --unstable --unstable +' + +#Now test various option combinations. +test_expect_success 'default is unstable' ' + test_patch_id relevant default +' + +test_expect_success 'patchid.stable = true is stable' ' + test_config patchid.stable true && + test_patch_id irrelevant patchid.stable=true +' + +test_expect_success 'patchid.stable = false is unstable' ' + test_config patchid.stable false && + test_patch_id relevant patchid.stable=false +' + +test_expect_success '--unstable overrides patchid.stable = true' ' + test_config patchid.stable true && + test_patch_id relevant patchid.stable=true--unstable --unstable +' + +test_expect_success '--stable overrides patchid.stable = false' ' + test_config patchid.stable false && + test_patch_id irrelevant patchid.stable=false--stable --stable +' + test_expect_success 'patch-id supports git-format-patch MIME output' ' get_patch_id master && git checkout same && diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 1cf0a4e103..899c1c5bbc 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -72,7 +72,7 @@ check_tar() { for header in *.paxheader do data=${header%.paxheader}.data && - if test -h $data -o -e $data + if test -h $data || test -e $data then path=$(get_pax_header $header path) && if test -n "$path" @@ -123,7 +123,7 @@ test_expect_success \ 'add files to repository' \ 'find a -type f | xargs git update-index --add && find a -type l | xargs git update-index --add && - treeid=`git write-tree` && + treeid=$(git write-tree) && echo $treeid >treeid && git update-ref HEAD $(TZ=GMT GIT_COMMITTER_DATE="2005-05-27 22:00:00" \ git commit-tree $treeid </dev/null)' @@ -164,7 +164,7 @@ check_tar with_olde-prefix olde- test_expect_success 'git archive on large files' ' test_config core.bigfilethreshold 1 && git archive HEAD >b3.tar && - test_cmp b.tar b3.tar + test_cmp_bin b.tar b3.tar ' test_expect_success \ @@ -173,15 +173,15 @@ test_expect_success \ test_expect_success \ 'git archive vs. the same in a bare repo' \ - 'test_cmp b.tar b3.tar' + 'test_cmp_bin b.tar b3.tar' test_expect_success 'git archive with --output' \ 'git archive --output=b4.tar HEAD && - test_cmp b.tar b4.tar' + test_cmp_bin b.tar b4.tar' test_expect_success 'git archive --remote' \ 'git archive --remote=. HEAD >b5.tar && - test_cmp b.tar b5.tar' + test_cmp_bin b.tar b5.tar' test_expect_success \ 'validate file modification time' \ @@ -198,7 +198,7 @@ test_expect_success \ test_expect_success 'git archive with --output, override inferred format' ' git archive --format=tar --output=d4.zip HEAD && - test_cmp b.tar d4.zip + test_cmp_bin b.tar d4.zip ' test_expect_success \ @@ -207,7 +207,7 @@ test_expect_success \ test_expect_success 'clients cannot access unreachable commits' ' test_commit unreachable && - sha1=`git rev-parse HEAD` && + sha1=$(git rev-parse HEAD) && git reset --hard HEAD^ && git archive $sha1 >remote.tar && test_must_fail git archive --remote=. $sha1 >remote.tar @@ -215,7 +215,7 @@ test_expect_success 'clients cannot access unreachable commits' ' test_expect_success 'upload-archive can allow unreachable commits' ' test_commit unreachable1 && - sha1=`git rev-parse HEAD` && + sha1=$(git rev-parse HEAD) && git reset --hard HEAD^ && git archive $sha1 >remote.tar && test_config uploadarchive.allowUnreachable true && @@ -244,34 +244,34 @@ test_expect_success 'archive --list shows only enabled remote filters' ' test_expect_success 'invoke tar filter by format' ' git archive --format=tar.foo HEAD >config.tar.foo && tr ab ba <config.tar.foo >config.tar && - test_cmp b.tar config.tar && + test_cmp_bin b.tar config.tar && git archive --format=bar HEAD >config.bar && tr ab ba <config.bar >config.tar && - test_cmp b.tar config.tar + test_cmp_bin b.tar config.tar ' test_expect_success 'invoke tar filter by extension' ' git archive -o config-implicit.tar.foo HEAD && - test_cmp config.tar.foo config-implicit.tar.foo && + test_cmp_bin config.tar.foo config-implicit.tar.foo && git archive -o config-implicit.bar HEAD && - test_cmp config.tar.foo config-implicit.bar + test_cmp_bin config.tar.foo config-implicit.bar ' test_expect_success 'default output format remains tar' ' git archive -o config-implicit.baz HEAD && - test_cmp b.tar config-implicit.baz + test_cmp_bin b.tar config-implicit.baz ' test_expect_success 'extension matching requires dot' ' git archive -o config-implicittar.foo HEAD && - test_cmp b.tar config-implicittar.foo + test_cmp_bin b.tar config-implicittar.foo ' test_expect_success 'only enabled filters are available remotely' ' test_must_fail git archive --remote=. --format=tar.foo HEAD \ >remote.tar.foo && git archive --remote=. --format=bar >remote.bar HEAD && - test_cmp remote.bar config.bar + test_cmp_bin remote.bar config.bar ' test_expect_success GZIP 'git archive --format=tgz' ' @@ -280,27 +280,27 @@ test_expect_success GZIP 'git archive --format=tgz' ' test_expect_success GZIP 'git archive --format=tar.gz' ' git archive --format=tar.gz HEAD >j1.tar.gz && - test_cmp j.tgz j1.tar.gz + test_cmp_bin j.tgz j1.tar.gz ' test_expect_success GZIP 'infer tgz from .tgz filename' ' git archive --output=j2.tgz HEAD && - test_cmp j.tgz j2.tgz + test_cmp_bin j.tgz j2.tgz ' test_expect_success GZIP 'infer tgz from .tar.gz filename' ' git archive --output=j3.tar.gz HEAD && - test_cmp j.tgz j3.tar.gz + test_cmp_bin j.tgz j3.tar.gz ' test_expect_success GZIP 'extract tgz file' ' gzip -d -c <j.tgz >j.tar && - test_cmp b.tar j.tar + test_cmp_bin b.tar j.tar ' test_expect_success GZIP 'remote tar.gz is allowed by default' ' git archive --remote=. --format=tar.gz HEAD >remote.tar.gz && - test_cmp j.tgz remote.tar.gz + test_cmp_bin j.tgz remote.tar.gz ' test_expect_success GZIP 'remote tar.gz can be disabled' ' diff --git a/t/t5001-archive-attr.sh b/t/t5001-archive-attr.sh index 51dedab29b..b04d955bfa 100755 --- a/t/t5001-archive-attr.sh +++ b/t/t5001-archive-attr.sh @@ -68,7 +68,7 @@ test_expect_missing worktree2/ignored-by-worktree test_expect_success 'git archive vs. bare' ' (cd bare && git archive HEAD) >bare-archive.tar && - test_cmp archive.tar bare-archive.tar + test_cmp_bin archive.tar bare-archive.tar ' test_expect_success 'git archive with worktree attributes, bare' ' diff --git a/t/t5003-archive-zip.sh b/t/t5003-archive-zip.sh index c72f71eb18..21a5c93f41 100755 --- a/t/t5003-archive-zip.sh +++ b/t/t5003-archive-zip.sh @@ -97,15 +97,15 @@ test_expect_success \ test_expect_success \ 'git archive --format=zip vs. the same in a bare repo' \ - 'test_cmp d.zip d1.zip' + 'test_cmp_bin d.zip d1.zip' test_expect_success 'git archive --format=zip with --output' \ 'git archive --format=zip --output=d2.zip HEAD && - test_cmp d.zip d2.zip' + test_cmp_bin d.zip d2.zip' test_expect_success 'git archive with --output, inferring format' ' git archive --output=d3.zip HEAD && - test_cmp d.zip d3.zip + test_cmp_bin d.zip d3.zip ' test_expect_success \ diff --git a/t/t5004-archive-corner-cases.sh b/t/t5004-archive-corner-cases.sh index 67f3b54bed..305bcac6b7 100755 --- a/t/t5004-archive-corner-cases.sh +++ b/t/t5004-archive-corner-cases.sh @@ -45,7 +45,7 @@ test_expect_success HEADER_ONLY_TAR_OK 'tar archive of commit with empty tree' ' test_expect_success 'tar archive of empty tree is empty' ' git archive --format=tar HEAD: >empty.tar && perl -e "print \"\\0\" x 10240" >10knuls.tar && - test_cmp 10knuls.tar empty.tar + test_cmp_bin 10knuls.tar empty.tar ' test_expect_success 'tar archive of empty tree with prefix' ' diff --git a/t/t5150-request-pull.sh b/t/t5150-request-pull.sh index 93e2c65de6..82c33b88e7 100755 --- a/t/t5150-request-pull.sh +++ b/t/t5150-request-pull.sh @@ -229,7 +229,7 @@ test_expect_success 'pull request format' ' cd local && git request-pull initial "$downstream_url" full ) >request && - grep ' tags/full$' + grep " tags/full\$" request ' test_expect_success 'request-pull ignores OPTIONS_KEEPDASHDASH poison' ' diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index f4f02ba918..0580258c91 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -18,7 +18,7 @@ test_expect_success 'setup repo with moderate-sized history' ' git checkout master && blob=$(echo tagged-blob | git hash-object -w --stdin) && git tag tagged-blob $blob && - git config pack.writebitmaps true && + git config repack.writebitmaps true && git config pack.writebitmaphashcache true ' diff --git a/t/t5403-post-checkout-hook.sh b/t/t5403-post-checkout-hook.sh index 1753ef2b91..fc898c9eac 100755 --- a/t/t5403-post-checkout-hook.sh +++ b/t/t5403-post-checkout-hook.sh @@ -39,7 +39,7 @@ test_expect_success 'post-checkout receives the right arguments with HEAD unchan old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && - test $old = $new -a $flag = 1 + test $old = $new && test $flag = 1 ' test_expect_success 'post-checkout runs as expected ' ' @@ -52,7 +52,7 @@ test_expect_success 'post-checkout args are correct with git checkout -b ' ' old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && - test $old = $new -a $flag = 1 + test $old = $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args with HEAD changed ' ' @@ -60,7 +60,7 @@ test_expect_success 'post-checkout receives the right args with HEAD changed ' ' old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && - test $old != $new -a $flag = 1 + test $old != $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args when not switching branches ' ' @@ -68,7 +68,7 @@ test_expect_success 'post-checkout receives the right args when not switching br old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && - test $old = $new -a $flag = 0 + test $old = $new && test $flag = 0 ' if test "$(git config --bool core.filemode)" = true; then diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 29d59ef9fa..d78f3201f4 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -447,6 +447,43 @@ test_expect_success 'explicit pull should update tracking' ' ) ' +test_expect_success 'explicit --refmap is allowed only with command-line refspec' ' + cd "$D" && + ( + cd three && + test_must_fail git fetch --refmap="*:refs/remotes/none/*" + ) +' + +test_expect_success 'explicit --refmap option overrides remote.*.fetch' ' + cd "$D" && + git branch -f side && + ( + cd three && + git update-ref refs/remotes/origin/master base-origin-master && + o=$(git rev-parse --verify refs/remotes/origin/master) && + git fetch --refmap="refs/heads/*:refs/remotes/other/*" origin master && + n=$(git rev-parse --verify refs/remotes/origin/master) && + test "$o" = "$n" && + test_must_fail git rev-parse --verify refs/remotes/origin/side && + git rev-parse --verify refs/remotes/other/master + ) +' + +test_expect_success 'explicitly empty --refmap option disables remote.*.fetch' ' + cd "$D" && + git branch -f side && + ( + cd three && + git update-ref refs/remotes/origin/master base-origin-master && + o=$(git rev-parse --verify refs/remotes/origin/master) && + git fetch --refmap="" origin master && + n=$(git rev-parse --verify refs/remotes/origin/master) && + test "$o" = "$n" && + test_must_fail git rev-parse --verify refs/remotes/origin/side + ) +' + test_expect_success 'configured fetch updates tracking' ' cd "$D" && diff --git a/t/t5511-refspec.sh b/t/t5511-refspec.sh index c28932216b..de6db86ccf 100755 --- a/t/t5511-refspec.sh +++ b/t/t5511-refspec.sh @@ -5,7 +5,6 @@ test_description='refspec parsing' . ./test-lib.sh test_refspec () { - kind=$1 refspec=$2 expect=$3 git config remote.frotz.url "." && git config --remove-section remote.frotz && @@ -84,4 +83,9 @@ test_refspec push 'refs/heads/*/*/for-linus:refs/remotes/mine/*' invalid test_refspec fetch 'refs/heads/*/for-linus:refs/remotes/mine/*' test_refspec push 'refs/heads/*/for-linus:refs/remotes/mine/*' +good=$(printf '\303\204') +test_refspec fetch "refs/heads/${good}" +bad=$(printf '\011tab') +test_refspec fetch "refs/heads/${bad}" invalid + test_done diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index 1a3a2b6c1a..ac71418a1b 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -171,5 +171,30 @@ test_expect_success 'did not use upload-pack service' ' test_cmp exp act ' +test_expect_success 'git client shows text/plain errors' ' + test_must_fail git clone "$HTTPD_URL/error/text" 2>stderr && + grep "this is the error message" stderr +' + +test_expect_success 'git client does not show html errors' ' + test_must_fail git clone "$HTTPD_URL/error/html" 2>stderr && + ! grep "this is the error message" stderr +' + +test_expect_success 'git client shows text/plain with a charset' ' + test_must_fail git clone "$HTTPD_URL/error/charset" 2>stderr && + grep "this is the error message" stderr +' + +test_expect_success 'http error messages are reencoded' ' + test_must_fail git clone "$HTTPD_URL/error/utf16" 2>stderr && + grep "this is the error message" stderr +' + +test_expect_success 'reencoding is robust to whitespace oddities' ' + test_must_fail git clone "$HTTPD_URL/error/odd-spacing" 2>stderr && + grep "this is the error message" stderr +' + stop_httpd test_done diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index e07eaf35f1..6cbc12d9a7 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -213,8 +213,6 @@ test_expect_success 'cookies stored in http.cookiefile when http.savecookies set test_cmp expect_cookies.txt cookies_tail.txt ' -test -n "$GIT_TEST_LONG" && test_set_prereq EXPENSIVE - test_expect_success EXPENSIVE 'create 50,000 tags in the repo' ' ( cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && @@ -240,8 +238,7 @@ test_expect_success EXPENSIVE 'create 50,000 tags in the repo' ' ' test_expect_success EXPENSIVE 'clone the 50,000 tag repo to check OS command line overflow' ' - git clone $HTTPD_URL/smart/repo.git too-many-refs 2>err && - test_line_count = 0 err && + git clone $HTTPD_URL/smart/repo.git too-many-refs && ( cd too-many-refs && test $(git for-each-ref refs/tags | wc -l) = 50000 diff --git a/t/t5560-http-backend-noserver.sh b/t/t5560-http-backend-noserver.sh index 5abd11a563..aa73eeaef8 100755 --- a/t/t5560-http-backend-noserver.sh +++ b/t/t5560-http-backend-noserver.sh @@ -5,7 +5,11 @@ test_description='test git-http-backend-noserver' HTTPD_DOCUMENT_ROOT_PATH="$TRASH_DIRECTORY" -test_have_prereq GREP_STRIPS_CR && export GREP_OPTIONS=-U +if test_have_prereq GREP_STRIPS_CR +then + GREP_OPTIONS=-U + export GREP_OPTIONS +fi run_backend() { echo "$2" | diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh index a00a660763..2419407546 100755 --- a/t/t5801-remote-helpers.sh +++ b/t/t5801-remote-helpers.sh @@ -87,13 +87,29 @@ test_expect_success 'push new branch by name' ' compare_refs local HEAD server refs/heads/new-name ' -test_expect_failure 'push new branch with old:new refspec' ' +test_expect_success 'push new branch with old:new refspec' ' (cd local && git push origin new-name:new-refspec ) && compare_refs local HEAD server refs/heads/new-refspec ' +test_expect_success 'push new branch with HEAD:new refspec' ' + (cd local && + git checkout new-name + git push origin HEAD:new-refspec-2 + ) && + compare_refs local HEAD server refs/heads/new-refspec-2 +' + +test_expect_success 'push delete branch' ' + (cd local && + git push origin :new-name + ) && + test_must_fail git --git-dir="server/.git" \ + rev-parse --verify refs/heads/new-name +' + test_expect_success 'forced push' ' (cd local && git checkout -b force-test && diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index c277db64f7..88ed3191e8 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -468,4 +468,10 @@ test_expect_success 'single-character name is parsed correctly' ' test_cmp expect actual ' +test_expect_success 'unused %G placeholders are passed through' ' + echo "%GX %G" >expect && + git log -1 --format="%GX %G" >actual && + test_cmp expect actual +' + test_done diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index 719a11673b..68b3cb26d9 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -318,6 +318,33 @@ test_expect_success 'test --format long' ' test_cmp expected actual ' +test_expect_success 'setup a fake editor' ' + write_script fakeeditor <<-\EOF + sed -e "s/A U Thor/A fake Thor/" "$1" >"$1.new" + mv "$1.new" "$1" + EOF +' + +test_expect_success '--edit with and without already replaced object' ' + test_must_fail env GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && + GIT_EDITOR=./fakeeditor git replace --force --edit "$PARA3" && + git replace -l | grep "$PARA3" && + git cat-file commit "$PARA3" | grep "A fake Thor" && + git replace -d "$PARA3" && + GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && + git replace -l | grep "$PARA3" && + git cat-file commit "$PARA3" | grep "A fake Thor" +' + +test_expect_success '--edit and change nothing or command failed' ' + git replace -d "$PARA3" && + test_must_fail env GIT_EDITOR=true git replace --edit "$PARA3" && + test_must_fail env GIT_EDITOR="./fakeeditor;false" git replace --edit "$PARA3" && + GIT_EDITOR=./fakeeditor git replace --edit "$PARA3" && + git replace -l | grep "$PARA3" && + git cat-file commit "$PARA3" | grep "A fake Thor" +' + test_expect_success 'replace ref cleanup' ' test -n "$(git replace)" && git replace -d $(git replace) && diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 143a8ea605..e4ab0f5b64 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -1423,4 +1423,30 @@ EOF test_cmp expect actual ' +run_with_limited_stack () { + (ulimit -s 64 && "$@") +} + +test_lazy_prereq ULIMIT 'run_with_limited_stack true' + +# we require ulimit, this excludes Windows +test_expect_success ULIMIT '--contains works in a deep repo' ' + >expect && + i=1 && + while test $i -lt 4000 + do + echo "commit refs/heads/master +committer A U Thor <author@example.com> $((1000000000 + $i * 100)) +0200 +data <<EOF +commit #$i +EOF" + test $i = 1 && echo "from refs/heads/master^0" + i=$(($i + 1)) + done | git fast-import && + git checkout master && + git tag far-far-away HEAD^ && + run_with_limited_stack git tag --contains HEAD >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index d58b097ff3..63e04277f9 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -346,8 +346,21 @@ test_expect_success 'amend commit to fix date' ' ' -test_expect_success 'commit complains about bogus date' ' - test_must_fail git commit --amend --date=10.11.2010 +test_expect_success 'commit mentions forced date in output' ' + git commit --amend --date=2010-01-02T03:04:05 >output && + grep "Date: *Sat Jan 2 03:04:05 2010" output +' + +test_expect_success 'commit complains about completely bogus dates' ' + test_must_fail git commit --amend --date=seventeen +' + +test_expect_success 'commit --date allows approxidate' ' + git commit --amend \ + --date="midnight the 12th of october, anno domini 1979" && + echo "Fri Oct 12 00:00:00 1979 +0000" >expect && + git log -1 --format=%ad >actual && + test_cmp expect actual ' test_expect_success 'sign off (1)' ' diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 9a3f3a1b41..051489ea33 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -344,6 +344,13 @@ test_expect_success 'message shows author when it is not equal to committer' ' .git/COMMIT_EDITMSG ' +test_expect_success 'message shows date when it is explicitly set' ' + git commit --allow-empty -e -m foo --date="2010-01-02T03:04:05" && + test_i18ngrep \ + "^# Date: *Sat Jan 2 03:04:05 2010 +0000" \ + .git/COMMIT_EDITMSG +' + test_expect_success AUTOIDENT 'message shows committer when it is automatic' ' echo >>negative && @@ -563,4 +570,30 @@ test_expect_success 'commit --status with custom comment character' ' test_i18ngrep "^; Changes to be committed:" .git/COMMIT_EDITMSG ' +test_expect_success 'switch core.commentchar' ' + test_commit "#foo" foo && + GIT_EDITOR=.git/FAKE_EDITOR git -c core.commentChar=auto commit --amend && + test_i18ngrep "^; Changes to be committed:" .git/COMMIT_EDITMSG +' + +test_expect_success 'switch core.commentchar but out of options' ' + cat >text <<\EOF && +# 1 +; 2 +@ 3 +! 4 +$ 5 +% 6 +^ 7 +& 8 +| 9 +: 10 +EOF + git commit --amend -F text && + ( + test_set_editor .git/FAKE_EDITOR && + test_must_fail git -c core.commentChar=auto commit --amend + ) +' + test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index d48006960e..8ed5788808 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -1350,8 +1350,7 @@ test_expect_success "status (core.commentchar with submodule summary)" ' test_expect_success "status (core.commentchar with two chars with submodule summary)" ' test_config core.commentchar ";;" && - git -c status.displayCommentPrefix=true status >output && - test_i18ncmp expect output + test_must_fail git -c status.displayCommentPrefix=true status ' test_expect_success "--ignore-submodules=all suppresses submodule summary" ' diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 5ddac1a9f7..474dab381a 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -43,44 +43,74 @@ test_expect_success GPG 'create signed commits' ' test_tick && git rebase -f HEAD^^ && git tag sixth-signed HEAD^ && git tag seventh-signed + + echo 8 >file && test_tick && git commit -a -m eighth -SB7227189 && + git tag eighth-signed-alt ' -test_expect_success GPG 'show signatures' ' +test_expect_success GPG 'verify and show signatures' ' ( - for commit in initial second merge fourth-signed fifth-signed sixth-signed master + for commit in initial second merge fourth-signed fifth-signed sixth-signed seventh-signed do + git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && - grep "Good signature from" actual || exit 1 - ! grep "BAD signature from" actual || exit 1 - echo $commit OK + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo $commit OK || exit 1 done ) && ( for commit in merge^2 fourth-unsigned sixth-unsigned seventh-unsigned do + test_must_fail git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && - grep "Good signature from" actual && exit 1 - ! grep "BAD signature from" actual || exit 1 - echo $commit OK + ! grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo $commit OK || exit 1 + done + ) && + ( + for commit in eighth-signed-alt + do + git show --pretty=short --show-signature $commit >actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + grep "not certified" actual && + echo $commit OK || exit 1 done ) ' +test_expect_success GPG 'show signed commit with signature' ' + git show -s initial >commit && + git show -s --show-signature initial >show && + git verify-commit -v initial >verify.1 2>verify.2 && + git cat-file commit initial >cat && + grep -v "gpg: " show >show.commit && + grep "gpg: " show >show.gpg && + grep -v "^ " cat | grep -v "^gpgsig " >cat.commit && + test_cmp show.commit commit && + test_cmp show.gpg verify.2 && + test_cmp cat.commit verify.1 +' + test_expect_success GPG 'detect fudged signature' ' - git cat-file commit master >raw && + git cat-file commit seventh-signed >raw && sed -e "s/seventh/7th forged/" raw >forged1 && git hash-object -w -t commit forged1 >forged1.commit && + ! git verify-commit $(cat forged1.commit) && git show --pretty=short --show-signature $(cat forged1.commit) >actual1 && grep "BAD signature from" actual1 && ! grep "Good signature from" actual1 ' test_expect_success GPG 'detect fudged signature with NUL' ' - git cat-file commit master >raw && + git cat-file commit seventh-signed >raw && cat raw >forged2 && echo Qwik | tr "Q" "\000" >>forged2 && git hash-object -w -t commit forged2 >forged2.commit && + ! git verify-commit $(cat forged2.commit) && git show --pretty=short --show-signature $(cat forged2.commit) >actual2 && grep "BAD signature from" actual2 && ! grep "Good signature from" actual2 @@ -89,9 +119,50 @@ test_expect_success GPG 'detect fudged signature with NUL' ' test_expect_success GPG 'amending already signed commit' ' git checkout fourth-signed^0 && git commit --amend -S --no-edit && + git verify-commit HEAD && git show -s --show-signature HEAD >actual && grep "Good signature from" actual && ! grep "BAD signature from" actual ' +test_expect_success GPG 'show good signature with custom format' ' + cat >expect <<-\EOF && + G + 13B6F51ECDDE430D + C O Mitter <committer@example.com> + EOF + git log -1 --format="%G?%n%GK%n%GS" sixth-signed >actual && + test_cmp expect actual +' + +test_expect_success GPG 'show bad signature with custom format' ' + cat >expect <<-\EOF && + B + 13B6F51ECDDE430D + C O Mitter <committer@example.com> + EOF + git log -1 --format="%G?%n%GK%n%GS" $(cat forged1.commit) >actual && + test_cmp expect actual +' + +test_expect_success GPG 'show unknown signature with custom format' ' + cat >expect <<-\EOF && + U + 61092E85B7227189 + Eris Discordia <discord@example.net> + EOF + git log -1 --format="%G?%n%GK%n%GS" eighth-signed-alt >actual && + test_cmp expect actual +' + +test_expect_success GPG 'show lack of signature with custom format' ' + cat >expect <<-\EOF && + N + + + EOF + git log -1 --format="%G?%n%GK%n%GS" seventh-unsigned >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 284018e3cd..021c5479bd 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -21,7 +21,7 @@ test_expect_success 'objects in packs marked .keep are not repacked' ' objsha1=$(git verify-pack -v pack-$packsha1.idx | head -n 1 | sed -e "s/^\([0-9a-f]\{40\}\).*/\1/") && mv pack-* .git/objects/pack/ && - git repack --no-pack-kept-objects -A -d -l && + git repack -A -d -l && git prune-packed && for p in .git/objects/pack/*.idx; do idx=$(basename $p) @@ -35,9 +35,25 @@ test_expect_success 'objects in packs marked .keep are not repacked' ' test -z "$found_duplicate_object" ' -test_expect_success 'writing bitmaps can duplicate .keep objects' ' +test_expect_success 'writing bitmaps via command-line can duplicate .keep objects' ' # build on $objsha1, $packsha1, and .keep state from previous - git repack -Adl && + git repack -Adbl && + test_when_finished "found_duplicate_object=" && + for p in .git/objects/pack/*.idx; do + idx=$(basename $p) + test "pack-$packsha1.idx" = "$idx" && continue + if git verify-pack -v $p | egrep "^$objsha1"; then + found_duplicate_object=1 + echo "DUPLICATE OBJECT FOUND" + break + fi + done && + test "$found_duplicate_object" = 1 +' + +test_expect_success 'writing bitmaps via config can duplicate .keep objects' ' + # build on $objsha1, $packsha1, and .keep state from previous + git -c repack.writebitmaps=true repack -Adl && test_when_finished "found_duplicate_object=" && for p in .git/objects/pack/*.idx; do idx=$(basename $p) diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 5a193c500d..dc30a514bf 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -58,7 +58,7 @@ test_expect_success PERL 'custom tool commands override built-ins' ' test_expect_success PERL 'difftool ignores bad --tool values' ' : >expect && - test_expect_code 1 \ + test_must_fail \ git difftool --no-prompt --tool=bad-tool branch >actual && test_cmp expect actual ' diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 63b3039243..40615debc4 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -1096,11 +1096,6 @@ test_expect_success 'grep -E pattern with grep.patternType=fixed' ' test_cmp expected actual ' -test_config() { - git config "$1" "$2" && - test_when_finished "git config --unset $1" -} - cat >expected <<EOF hello.c<RED>:<RESET>int main(int argc, const char **argv) hello.c<RED>-<RESET>{ diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index 1ecdacb6fd..19a3ced600 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -1334,6 +1334,51 @@ test_expect_success $PREREQ '--force sends cover letter template anyway' ' test -n "$(ls msgtxt*)" ' +test_cover_addresses () { + header="$1" + shift + clean_fake_sendmail && + rm -fr outdir && + git format-patch --cover-letter -2 -o outdir && + cover=`echo outdir/0000-*.patch` && + mv $cover cover-to-edit.patch && + perl -pe "s/^From:/$header: extra\@address.com\nFrom:/" cover-to-edit.patch >"$cover" && + git send-email \ + --force \ + --from="Example <nobody@example.com>" \ + --no-to --no-cc \ + "$@" \ + --smtp-server="$(pwd)/fake.sendmail" \ + outdir/0000-*.patch \ + outdir/0001-*.patch \ + outdir/0002-*.patch \ + 2>errors >out && + grep "^$header: extra@address.com" msgtxt1 >to1 && + grep "^$header: extra@address.com" msgtxt2 >to2 && + grep "^$header: extra@address.com" msgtxt3 >to3 && + test_line_count = 1 to1 && + test_line_count = 1 to2 && + test_line_count = 1 to3 +} + +test_expect_success $PREREQ 'to-cover adds To to all mail' ' + test_cover_addresses "To" --to-cover +' + +test_expect_success $PREREQ 'cc-cover adds Cc to all mail' ' + test_cover_addresses "Cc" --cc-cover +' + +test_expect_success $PREREQ 'tocover adds To to all mail' ' + test_config sendemail.tocover true && + test_cover_addresses "To" +' + +test_expect_success $PREREQ 'cccover adds Cc to all mail' ' + test_config sendemail.cccover true && + test_cover_addresses "Cc" +' + test_expect_success $PREREQ 'sendemail.aliasfiletype=mailrc' ' clean_fake_sendmail && echo "alias sbd somebody@example.org" >.mailrc && diff --git a/t/t9138-git-svn-authors-prog.sh b/t/t9138-git-svn-authors-prog.sh index 83cc5fc9d1..2937f4c265 100755 --- a/t/t9138-git-svn-authors-prog.sh +++ b/t/t9138-git-svn-authors-prog.sh @@ -7,40 +7,39 @@ test_description='git svn authors prog tests' . ./lib-git-svn.sh -cat > svn-authors-prog <<'EOF' -#!/usr/bin/perl -$_ = shift; -if (s/-sub$//) { - print "$_ <$_\@sub.example.com>\n"; -} -else { - print "$_ <$_\@example.com>\n"; -} +write_script svn-authors-prog "$PERL_PATH" <<-\EOF + $_ = shift; + if (s/-sub$//) { + print "$_ <$_\@sub.example.com>\n"; + } else { + print "$_ <$_\@example.com>\n"; + } EOF -chmod +x svn-authors-prog -cat > svn-authors <<'EOF' -ff = FFFFFFF FFFFFFF <fFf@other.example.com> -EOF +test_expect_success 'svn-authors setup' ' + cat >svn-authors <<-\EOF + ff = FFFFFFF FFFFFFF <fFf@other.example.com> + EOF +' test_expect_success 'setup svnrepo' ' for i in aa bb cc-sub dd-sub ee-foo ff do svn mkdir -m $i --username $i "$svnrepo"/$i done - ' +' test_expect_success 'import authors with prog and file' ' git svn clone --authors-prog=./svn-authors-prog \ --authors-file=svn-authors "$svnrepo" x - ' +' test_expect_success 'imported 6 revisions successfully' ' ( cd x test "`git rev-list refs/remotes/git-svn | wc -l`" -eq 6 ) - ' +' test_expect_success 'authors-prog ran correctly' ' ( @@ -56,7 +55,7 @@ test_expect_success 'authors-prog ran correctly' ' git rev-list -1 --pretty=raw refs/remotes/git-svn~5 | \ grep "^author aa <aa@example\.com> " ) - ' +' test_expect_success 'authors-file overrode authors-prog' ' ( @@ -64,7 +63,7 @@ test_expect_success 'authors-file overrode authors-prog' ' git rev-list -1 --pretty=raw refs/remotes/git-svn | \ grep "^author FFFFFFF FFFFFFF <fFf@other\.example\.com> " ) - ' +' git --git-dir=x/.git config --unset svn.authorsfile git --git-dir=x/.git config --unset svn.authorsprog diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 27263dfb80..5fc9ef262a 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -2999,4 +2999,22 @@ test_expect_success 'T: ls root tree' ' test_cmp expect actual ' +test_expect_success 'T: delete branch' ' + git branch to-delete && + git fast-import <<-EOF && + reset refs/heads/to-delete + from 0000000000000000000000000000000000000000 + EOF + test_must_fail git rev-parse --verify refs/heads/to-delete +' + +test_expect_success 'T: empty reset doesnt delete branch' ' + git branch not-to-delete && + git fast-import <<-EOF && + reset refs/heads/not-to-delete + EOF + git show-ref && + git rev-parse --verify refs/heads/not-to-delete +' + test_done diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 2312dec8f0..66c8b0a371 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -504,4 +504,22 @@ test_expect_success 'refs are updated even if no commits need to be exported' ' test_cmp expected actual ' +test_expect_success 'use refspec' ' + git fast-export --refspec refs/heads/master:refs/heads/foobar master | \ + grep "^commit " | sort | uniq > actual && + echo "commit refs/heads/foobar" > expected && + test_cmp expected actual +' + +test_expect_success 'delete refspec' ' + git branch to-delete && + git fast-export --refspec :refs/heads/to-delete to-delete ^to-delete > actual && + cat > expected <<-EOF && + reset refs/heads/to-delete + from 0000000000000000000000000000000000000000 + + EOF + test_cmp expected actual +' + test_done diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 4caf36e006..7fab2ed977 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -403,7 +403,8 @@ test_expect_success 'submit --prepare-p4-only' ' git commit -m "prep only add" && git p4 submit --prepare-p4-only >out && test_i18ngrep "prepared for submission" out && - test_i18ngrep "must be deleted" out + test_i18ngrep "must be deleted" out && + ! test_i18ngrep "everything below this line is just the diff" out ) && ( cd "$cli" && diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh index be802e0e16..1fc1f5f2af 100755 --- a/t/t9814-git-p4-rename.sh +++ b/t/t9814-git-p4-rename.sh @@ -177,7 +177,7 @@ test_expect_success 'detect copies' ' level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 -o "$src" = file11 && + test "$src" = file10 || test "$src" = file11 && git config git-p4.detectCopies $(($level + 2)) && git p4 submit && p4 filelog //depot/file12 && @@ -191,7 +191,7 @@ test_expect_success 'detect copies' ' level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 -o "$src" = file11 -o "$src" = file12 && + test "$src" = file10 || test "$src" = file11 || test "$src" = file12 && git config git-p4.detectCopies $(($level - 2)) && git p4 submit && p4 filelog //depot/file13 && diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 2d4beb5e50..1d1c1063a3 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -550,6 +550,33 @@ test_expect_success 'complete files' ' test_completion "git add mom" "momified" ' +test_expect_success "completion uses <cmd> completion for alias: !sh -c 'git <cmd> ...'" ' + test_config alias.co "!sh -c '"'"'git checkout ...'"'"'" && + test_completion "git co m" <<-\EOF + master Z + mybranch Z + mytag Z + EOF +' + +test_expect_success 'completion uses <cmd> completion for alias: !f () { VAR=val git <cmd> ... }' ' + test_config alias.co "!f () { VAR=val git checkout ... ; } f" && + test_completion "git co m" <<-\EOF + master Z + mybranch Z + mytag Z + EOF +' + +test_expect_success 'completion used <cmd> completion for alias: !f() { : git <cmd> ; ... }' ' + test_config alias.co "!f() { : git checkout ; if ... } f" && + test_completion "git co m" <<-\EOF + master Z + mybranch Z + mytag Z + EOF +' + test_expect_failure 'complete with tilde expansion' ' git init tmp && cd tmp && test_when_finished "cd .. && rm -rf tmp" && diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 158e10a67e..0377d3e296 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -542,7 +542,7 @@ test_must_fail () { if test $exit_code = 0; then echo >&2 "test_must_fail: command succeeded: $*" return 1 - elif test $exit_code -gt 129 -a $exit_code -le 192; then + elif test $exit_code -gt 129 && test $exit_code -le 192; then echo >&2 "test_must_fail: died by signal: $*" return 1 elif test $exit_code = 127; then @@ -569,7 +569,7 @@ test_must_fail () { test_might_fail () { "$@" exit_code=$? - if test $exit_code -gt 129 -a $exit_code -le 192; then + if test $exit_code -gt 129 && test $exit_code -le 192; then echo >&2 "test_might_fail: died by signal: $*" return 1 elif test $exit_code = 127; then @@ -617,6 +617,12 @@ test_cmp() { $GIT_TEST_CMP "$@" } +# test_cmp_bin - helper to compare binary files + +test_cmp_bin() { + cmp "$@" +} + # Check if the file expected to be empty is indeed empty, and barfs # otherwise. @@ -717,6 +723,11 @@ test_ln_s_add () { fi } +# This function writes out its parameters, one per line +test_write_lines () { + printf "%s\n" "$@" +} + perl () { command "$PERL_PATH" "$@" } diff --git a/t/test-lib.sh b/t/test-lib.sh index c081668dfe..a4795373a6 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -91,6 +91,7 @@ unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e ' VALGRIND UNZIP PERF_ + CURL_VERBOSE )); my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); print join("\n", @vars); @@ -191,6 +192,14 @@ do immediate=t; shift ;; -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;; + -r) + shift; test "$#" -ne 0 || { + echo 'error: -r requires an argument' >&2; + exit 1; + } + run_list=$1; shift ;; + --run=*) + run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;; -h|--h|--he|--hel|--help) help=t; shift ;; -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) @@ -366,6 +375,99 @@ match_pattern_list () { return 1 } +match_test_selector_list () { + title="$1" + shift + arg="$1" + shift + test -z "$1" && return 0 + + # Both commas and whitespace are accepted as separators. + OLDIFS=$IFS + IFS=' ,' + set -- $1 + IFS=$OLDIFS + + # If the first selector is negative we include by default. + include= + case "$1" in + !*) include=t ;; + esac + + for selector + do + orig_selector=$selector + + positive=t + case "$selector" in + !*) + positive= + selector=${selector##?} + ;; + esac + + test -z "$selector" && continue + + case "$selector" in + *-*) + if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in range" \ + "start: '$orig_selector'" >&2 + exit 1 + fi + if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in range" \ + "end: '$orig_selector'" >&2 + exit 1 + fi + ;; + *) + if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in test" \ + "selector: '$orig_selector'" >&2 + exit 1 + fi + esac + + # Short cut for "obvious" cases + test -z "$include" && test -z "$positive" && continue + test -n "$include" && test -n "$positive" && continue + + case "$selector" in + -*) + if test $arg -le ${selector#-} + then + include=$positive + fi + ;; + *-) + if test $arg -ge ${selector%-} + then + include=$positive + fi + ;; + *-*) + if test ${selector%%-*} -le $arg \ + && test $arg -le ${selector#*-} + then + include=$positive + fi + ;; + *) + if test $arg -eq $selector + then + include=$positive + fi + ;; + esac + done + + test -n "$include" +} + maybe_teardown_verbose () { test -z "$verbose_only" && return exec 4>/dev/null 3>/dev/null @@ -452,25 +554,35 @@ test_finish_ () { test_skip () { to_skip= + skipped_reason= if match_pattern_list $this_test.$test_count $GIT_SKIP_TESTS then to_skip=t + skipped_reason="GIT_SKIP_TESTS" fi if test -z "$to_skip" && test -n "$test_prereq" && ! test_have_prereq "$test_prereq" then to_skip=t - fi - case "$to_skip" in - t) + of_prereq= if test "$missing_prereq" != "$test_prereq" then of_prereq=" of $test_prereq" fi + skipped_reason="missing $missing_prereq${of_prereq}" + fi + if test -z "$to_skip" && test -n "$run_list" && + ! match_test_selector_list '--run' $test_count "$run_list" + then + to_skip=t + skipped_reason="--run" + fi + case "$to_skip" in + t) say_color skip >&3 "skipping test: $@" - say_color skip "ok $test_count # skip $1 (missing $missing_prereq${of_prereq})" + say_color skip "ok $test_count # skip $1 ($skipped_reason)" : true ;; *) @@ -864,6 +976,14 @@ test_lazy_prereq AUTOIDENT ' git var GIT_AUTHOR_IDENT ' +test_lazy_prereq EXPENSIVE ' + test -n "$GIT_TEST_LONG" +' + +test_lazy_prereq USR_BIN_TIME ' + test -x /usr/bin/time +' + # When the tests are run as root, permission tests will report that # things are writable when they shouldn't be. test -w / || test_set_prereq SANITY diff --git a/t/valgrind/default.supp b/t/valgrind/default.supp index 0a6724fcc4..332ab1a3b3 100644 --- a/t/valgrind/default.supp +++ b/t/valgrind/default.supp @@ -49,3 +49,11 @@ Memcheck:Addr4 fun:copy_ref } +{ + ignore-sse-check_refname_format + Memcheck:Addr8 + fun:check_refname_format + fun:cmd_check_ref_format + fun:handle_builtin + fun:main +} |