diff options
Diffstat (limited to 't/test-lib.sh')
| -rw-r--r-- | t/test-lib.sh | 181 |
1 files changed, 112 insertions, 69 deletions
diff --git a/t/test-lib.sh b/t/test-lib.sh index 9914d3e1cf..0055ebba46 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -15,9 +15,6 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see http://www.gnu.org/licenses/ . -# Keep the original TERM for say_color -ORIGINAL_TERM=$TERM - # Test the binaries we have just built. The tests are kept in # t/ subdirectory and are run in 'trash directory' subdirectory. if test -z "$TEST_DIRECTORY" @@ -68,12 +65,12 @@ done,*) esac # For repeatability, reset the environment to known value. +# TERM is sanitized below, after saving color control sequences. LANG=C LC_ALL=C PAGER=cat TZ=UTC -TERM=dumb -export LANG LC_ALL PAGER TERM TZ +export LANG LC_ALL PAGER TZ EDITOR=: # A call to "unset" with no arguments causes at least Solaris 10 # /usr/xpg4/bin/sh and /bin/ksh to bail out. So keep the unsets @@ -181,8 +178,14 @@ export _x05 _x40 _z40 LF u200c # This test checks if command xyzzy does the right thing... # ' # . ./test-lib.sh +test "x$TERM" != "xdumb" && ( + test -t 1 && + tput bold >/dev/null 2>&1 && + tput setaf 1 >/dev/null 2>&1 && + tput sgr0 >/dev/null 2>&1 + ) && + color=t -unset color while test "$#" -ne 0 do case "$1" in @@ -199,13 +202,13 @@ do } run_list=$1; shift ;; --run=*) - run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;; + run_list=${1#--*=}; shift ;; -h|--h|--he|--hel|--help) help=t; shift ;; -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) verbose=t; shift ;; --verbose-only=*) - verbose_only=$(expr "z$1" : 'z[^=]*=\(.*\)') + verbose_only=${1#--*=} shift ;; -q|--q|--qu|--qui|--quie|--quiet) # Ignore --quiet under a TAP::Harness. Saying how many tests @@ -219,15 +222,21 @@ do valgrind=memcheck shift ;; --valgrind=*) - valgrind=$(expr "z$1" : 'z[^=]*=\(.*\)') + valgrind=${1#--*=} shift ;; --valgrind-only=*) - valgrind_only=$(expr "z$1" : 'z[^=]*=\(.*\)') + valgrind_only=${1#--*=} shift ;; --tee) shift ;; # was handled already --root=*) - root=$(expr "z$1" : 'z[^=]*=\(.*\)') + root=${1#--*=} + shift ;; + --chain-lint) + GIT_TEST_CHAIN_LINT=1 + shift ;; + --no-chain-lint) + GIT_TEST_CHAIN_LINT=0 shift ;; -x) trace=t @@ -247,6 +256,44 @@ then verbose=t fi +if test -n "$color" +then + # Save the color control sequences now rather than run tput + # each time say_color() is called. This is done for two + # reasons: + # * TERM will be changed to dumb + # * HOME will be changed to a temporary directory and tput + # might need to read ~/.terminfo from the original HOME + # directory to get the control sequences + # Note: This approach assumes the control sequences don't end + # in a newline for any terminal of interest (command + # substitutions strip trailing newlines). Given that most + # (all?) terminals in common use are related to ECMA-48, this + # shouldn't be a problem. + say_color_error=$(tput bold; tput setaf 1) # bold red + say_color_skip=$(tput setaf 4) # blue + say_color_warn=$(tput setaf 3) # brown/yellow + say_color_pass=$(tput setaf 2) # green + say_color_info=$(tput setaf 6) # cyan + say_color_reset=$(tput sgr0) + say_color_="" # no formatting for normal text + say_color () { + test -z "$1" && test -n "$quiet" && return + eval "say_color_color=\$say_color_$1" + shift + printf "%s\\n" "$say_color_color$*$say_color_reset" + } +else + say_color() { + test -z "$1" && test -n "$quiet" && return + shift + printf "%s\n" "$*" + } +fi + +TERM=dumb +export TERM + error () { say_color error "error: $*" GIT_EXIT_OK=t @@ -275,6 +322,19 @@ else exec 4>/dev/null 3>/dev/null fi +# Send any "-x" output directly to stderr to avoid polluting tests +# which capture stderr. We can do this unconditionally since it +# has no effect if tracing isn't turned on. +# +# Note that this sets up the trace fd as soon as we assign the variable, so it +# must come after the creation of descriptor 4 above. Likewise, we must never +# unset this, as it has the side effect of closing descriptor 4, which we +# use to show verbose tests to the user. +# +# Note also that we don't need or want to export it. The tracing is local to +# this shell, and we would not want to influence any shells we exec. +BASH_XTRACEFD=4 + test_failure=0 test_count=0 test_fixed=0 @@ -484,6 +544,10 @@ maybe_setup_valgrind () { fi } +want_trace () { + test "$trace" = t && test "$verbose" = t +} + # This is a separate function because some tests use # "return" to end a test_expect_success block early # (and we want to make sure we run any cleanup like @@ -491,7 +555,7 @@ maybe_setup_valgrind () { test_eval_inner_ () { # Do not add anything extra (including LF) after '$*' eval " - test \"$trace\" = t && set -x + want_trace && set -x $*" } @@ -507,7 +571,7 @@ test_eval_ () { { test_eval_inner_ "$@" </dev/null >&3 2>&4 test_eval_ret_=$? - if test "$trace" = t + if want_trace then set +x if test "$test_eval_ret_" != 0 @@ -522,6 +586,21 @@ test_eval_ () { test_run_ () { test_cleanup=: expecting_failure=$2 + + if test "${GIT_TEST_CHAIN_LINT:-1}" != 0; then + # turn off tracing for this test-eval, as it simply creates + # confusing noise in the "-x" output + trace_tmp=$trace + trace= + # 117 is magic because it is unlikely to match the exit + # code of other programs + test_eval_ "(exit 117) && $1" + if test "$?" != 117; then + error "bug in the test script: broken &&-chain: $1" + fi + trace=$trace_tmp + fi + setup_malloc_check test_eval_ "$1" eval_ret=$? @@ -788,10 +867,10 @@ test -d "$GIT_BUILD_DIR"/templates/blt || { error "You haven't built things yet, have you?" } -if ! test -x "$GIT_BUILD_DIR"/test-chmtime +if ! test -x "$GIT_BUILD_DIR"/t/helper/test-chmtime then echo >&2 'You need to build test-chmtime:' - echo >&2 'Run "make test-chmtime" in the source (toplevel) directory' + echo >&2 'Run "make t/helper/test-chmtime" in the source (toplevel) directory' exit 1 fi @@ -813,52 +892,6 @@ HOME="$TRASH_DIRECTORY" GNUPGHOME="$HOME/gnupg-home-not-used" export HOME GNUPGHOME -# run the tput tests *after* changing HOME (in case ncurses needs -# ~/.terminfo for $TERM) -test -n "${color+set}" || test "x$ORIGINAL_TERM" != "xdumb" && ( - TERM=$ORIGINAL_TERM && - export TERM && - test -t 1 && - tput bold >/dev/null 2>&1 && - tput setaf 1 >/dev/null 2>&1 && - tput sgr0 >/dev/null 2>&1 - ) && - color=t - -if test -n "$color" -then - say_color () { - ( - TERM=$ORIGINAL_TERM - export TERM - case "$1" in - error) - tput bold; tput setaf 1;; # bold red - skip) - tput setaf 4;; # blue - warn) - tput setaf 3;; # brown/yellow - pass) - tput setaf 2;; # green - info) - tput setaf 6;; # cyan - *) - test -n "$quiet" && return;; - esac - shift - printf "%s" "$*" - tput sgr0 - echo - ) - } -else - say_color() { - test -z "$1" && test -n "$quiet" && return - shift - printf "%s\n" "$*" - } -fi - if test -z "$TEST_NO_CREATE_REPO" then test_create_repo "$TRASH_DIRECTORY" @@ -887,9 +920,11 @@ yes () { y="$*" fi - while echo "$y" + i=0 + while test $i -lt 99 do - : + echo "$y" + i=$(($i+1)) done } @@ -978,7 +1013,7 @@ test_i18ngrep () { test_lazy_prereq PIPE ' # test whether the filesystem supports FIFOs case $(uname -s) in - CYGWIN*) + CYGWIN*|MINGW*) false ;; *) @@ -1034,20 +1069,28 @@ test_lazy_prereq NOT_ROOT ' test "$uid" != 0 ' -# On a filesystem that lacks SANITY, a file can be deleted even if -# the containing directory doesn't have write permissions, or a file -# can be accessed even if the containing directory doesn't have read -# or execute permissions, causing our tests that validate that Git -# works sensibly in such situations. +# SANITY is about "can you correctly predict what the filesystem would +# do by only looking at the permission bits of the files and +# directories?" A typical example of !SANITY is running the test +# suite as root, where a test may expect "chmod -r file && cat file" +# to fail because file is supposed to be unreadable after a successful +# chmod. In an environment (i.e. combination of what filesystem is +# being used and who is running the tests) that lacks SANITY, you may +# be able to delete or create a file when the containing directory +# doesn't have write permissions, or access a file even if the +# containing directory doesn't have read or execute permissions. + test_lazy_prereq SANITY ' mkdir SANETESTD.1 SANETESTD.2 && chmod +w SANETESTD.1 SANETESTD.2 && >SANETESTD.1/x 2>SANETESTD.2/x && chmod -w SANETESTD.1 && + chmod -r SANETESTD.1/x && chmod -rx SANETESTD.2 || error "bug in test sript: cannot prepare SANETESTD" + ! test -r SANETESTD.1/x && ! rm SANETESTD.1/x && ! test -f SANETESTD.2/x status=$? |