summaryrefslogtreecommitdiff
path: root/t/test-lib.sh
diff options
context:
space:
mode:
Diffstat (limited to 't/test-lib.sh')
-rw-r--r--t/test-lib.sh121
1 files changed, 101 insertions, 20 deletions
diff --git a/t/test-lib.sh b/t/test-lib.sh
index abc47f3abc..a65dfc7ea9 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -44,6 +44,7 @@ export LANG LC_ALL PAGER TERM TZ
EDITOR=:
unset VISUAL
unset EMAIL
+unset LANGUAGE
unset $(perl -e '
my @env = keys %ENV;
my $ok = join("|", qw(
@@ -89,6 +90,13 @@ esac
_x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
_x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05"
+# Zero SHA-1
+_z40=0000000000000000000000000000000000000000
+
+# Line feed
+LF='
+'
+
# Each test should start with something like this, after copyright notices:
#
# test_description='Description of this test...
@@ -184,6 +192,7 @@ then
fi
exec 5>&1
+exec 6<&0
if test "$verbose" = "t"
then
exec 4>&2 3>&1
@@ -354,6 +363,29 @@ test_chmod () {
git update-index --add "--chmod=$@"
}
+# Unset a configuration variable, but don't fail if it doesn't exist.
+test_unconfig () {
+ git config --unset-all "$@"
+ config_status=$?
+ case "$config_status" in
+ 5) # ok, nothing to unset
+ config_status=0
+ ;;
+ esac
+ return $config_status
+}
+
+# Set git config, automatically unsetting it after the test is over.
+test_config () {
+ test_when_finished "test_unconfig '$1'" &&
+ git config "$@"
+}
+
+test_config_global () {
+ test_when_finished "test_unconfig --global '$1'" &&
+ git config --global "$@"
+}
+
# Use test_set_prereq to tell that a particular prerequisite is available.
# The prerequisite can later be checked for in two ways:
#
@@ -441,15 +473,26 @@ test_debug () {
test "$debug" = "" || eval "$1"
}
+test_eval_ () {
+ # This is a separate function because some tests use
+ # "return" to end a test_expect_success block early.
+ eval </dev/null >&3 2>&4 "$*"
+}
+
test_run_ () {
test_cleanup=:
- eval >&3 2>&4 "$1"
+ expecting_failure=$2
+ test_eval_ "$1"
eval_ret=$?
- eval >&3 2>&4 "$test_cleanup"
+
+ if test -z "$immediate" || test $eval_ret = 0 || test -n "$expecting_failure"
+ then
+ test_eval_ "$test_cleanup"
+ fi
if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"; then
echo ""
fi
- return 0
+ return "$eval_ret"
}
test_skip () {
@@ -494,8 +537,7 @@ test_expect_failure () {
if ! test_skip "$@"
then
say >&3 "checking known breakage: $2"
- test_run_ "$2"
- if [ "$?" = 0 -a "$eval_ret" = 0 ]
+ if test_run_ "$2" expecting_failure
then
test_known_broken_ok_ "$1"
else
@@ -513,8 +555,7 @@ test_expect_success () {
if ! test_skip "$@"
then
say >&3 "expecting success: $2"
- test_run_ "$2"
- if [ "$?" = 0 -a "$eval_ret" = 0 ]
+ if test_run_ "$2"
then
test_ok_ "$1"
else
@@ -575,7 +616,7 @@ test_external () {
test_external_without_stderr () {
# The temporary file has no (and must have no) security
# implications.
- tmp="$TMPDIR"; if [ -z "$tmp" ]; then tmp=/tmp; fi
+ tmp=${TMPDIR:-/tmp}
stderr="$tmp/git-external-stderr.$$.tmp"
test_external "$@" 4> "$stderr"
[ -f "$stderr" ] || error "Internal error: $stderr disappeared."
@@ -728,12 +769,11 @@ test_expect_code () {
exit_code=$?
if test $exit_code = $want_code
then
- echo >&2 "test_expect_code: command exited with $exit_code: $*"
return 0
- else
- echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*"
- return 1
fi
+
+ echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*"
+ return 1
}
# test_cmp is a helper function to compare actual and expected output.
@@ -772,6 +812,9 @@ test_cmp() {
#
# except that the greeting and config --unset must both succeed for
# the test to pass.
+#
+# Note that under --immediate mode, no clean-up is done to help diagnose
+# what went wrong.
test_when_finished () {
test_cleanup="{ $*
@@ -801,12 +844,14 @@ test_done () {
mkdir -p "$test_results_dir"
test_results_path="$test_results_dir/${0%.sh}-$$.counts"
- echo "total $test_count" >> $test_results_path
- echo "success $test_success" >> $test_results_path
- echo "fixed $test_fixed" >> $test_results_path
- echo "broken $test_broken" >> $test_results_path
- echo "failed $test_failure" >> $test_results_path
- echo "" >> $test_results_path
+ cat >>"$test_results_path" <<-EOF
+ total $test_count
+ success $test_success
+ fixed $test_fixed
+ broken $test_broken
+ failed $test_failure
+
+ EOF
fi
if test "$test_fixed" != 0
@@ -880,8 +925,13 @@ then
}
make_valgrind_symlink () {
- # handle only executables
- test -x "$1" || return
+ # handle only executables, unless they are shell libraries that
+ # need to be in the exec-path. We will just use "#!" as a
+ # guess for a shell-script, since we have no idea what the user
+ # may have configured as the shell path.
+ test -x "$1" ||
+ test "#!" = "$(head -c 2 <"$1")" ||
+ return;
base=$(basename "$1")
symlink_target=$GIT_BUILD_DIR/$base
@@ -907,6 +957,8 @@ then
do
make_valgrind_symlink $file
done
+ # special-case the mergetools loadables
+ make_symlink "$GIT_BUILD_DIR"/mergetools "$GIT_VALGRIND/bin/mergetools"
OLDIFS=$IFS
IFS=:
for path in $PATH
@@ -1067,16 +1119,45 @@ esac
test -z "$NO_PERL" && test_set_prereq PERL
test -z "$NO_PYTHON" && test_set_prereq PYTHON
+test -n "$USE_LIBPCRE" && test_set_prereq LIBPCRE
+test -z "$NO_GETTEXT" && test_set_prereq GETTEXT
# Can we rely on git's output in the C locale?
if test -n "$GETTEXT_POISON"
then
GIT_GETTEXT_POISON=YesPlease
export GIT_GETTEXT_POISON
+ test_set_prereq GETTEXT_POISON
else
test_set_prereq C_LOCALE_OUTPUT
fi
+# Use this instead of test_cmp to compare files that contain expected and
+# actual output from git commands that can be translated. When running
+# under GETTEXT_POISON this pretends that the command produced expected
+# results.
+test_i18ncmp () {
+ test -n "$GETTEXT_POISON" || test_cmp "$@"
+}
+
+# Use this instead of "grep expected-string actual" to see if the
+# output from a git command that can be translated either contains an
+# expected string, or does not contain an unwanted one. When running
+# under GETTEXT_POISON this pretends that the command produced expected
+# results.
+test_i18ngrep () {
+ if test -n "$GETTEXT_POISON"
+ then
+ : # pretend success
+ elif test "x!" = "x$1"
+ then
+ shift
+ ! grep "$@"
+ else
+ grep "$@"
+ fi
+}
+
# test whether the filesystem supports symbolic links
ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS
rm -f y