diff options
Diffstat (limited to 't/test-lib.sh')
| -rw-r--r-- | t/test-lib.sh | 254 |
1 files changed, 151 insertions, 103 deletions
diff --git a/t/test-lib.sh b/t/test-lib.sh index 03c1c0836f..57efcc5e97 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -57,6 +57,15 @@ fi . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS export PERL_PATH SHELL_PATH +# In t0000, we need to override test directories of nested testcases. In case +# the developer has TEST_OUTPUT_DIRECTORY part of his build options, then we'd +# reset this value to instead contain what the developer has specified. We thus +# have this knob to allow overriding the directory. +if test -n "${TEST_OUTPUT_DIRECTORY_OVERRIDE}" +then + TEST_OUTPUT_DIRECTORY="${TEST_OUTPUT_DIRECTORY_OVERRIDE}" +fi + # Disallow the use of abbreviated options in the test suite by default if test -z "${GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS}" then @@ -64,6 +73,11 @@ then export GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS fi +# Explicitly set the default branch name for testing, to avoid the +# transitory "git init" warning under --verbose. +: ${GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME:=master} +export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME + ################################################################ # It appears that people try to run tests without building... "${GIT_TEST_INSTALLED:-$GIT_BUILD_DIR}/git$X" >/dev/null @@ -163,8 +177,8 @@ parse_option () { ;; --stress-jobs=*) stress=t; - stress=${opt#--*=} - case "$stress" in + stress_jobs=${opt#--*=} + case "$stress_jobs" in *[!0-9]*|0*|"") echo "error: --stress-jobs=<N> requires the number of jobs to run" >&2 exit 1 @@ -262,9 +276,9 @@ then : # Don't stress test again. elif test -n "$stress" then - if test "$stress" != t + if test -n "$stress_jobs" then - job_count=$stress + job_count=$stress_jobs elif test -n "$GIT_TEST_STRESS_LOAD" then job_count="$GIT_TEST_STRESS_LOAD" @@ -395,29 +409,27 @@ then verbose=t fi +# Since bash 5.0, checkwinsize is enabled by default which does +# update the COLUMNS variable every time a non-builtin command +# completes, even for non-interactive shells. +# Disable that since we are aiming for repeatability. +test -n "$BASH_VERSION" && shopt -u checkwinsize 2>/dev/null + # For repeatability, reset the environment to known value. # TERM is sanitized below, after saving color control sequences. LANG=C LC_ALL=C PAGER=cat TZ=UTC -export LANG LC_ALL PAGER TZ +COLUMNS=80 +export LANG LC_ALL PAGER TZ COLUMNS EDITOR=: -# GIT_TEST_GETTEXT_POISON should not influence git commands executed -# during initialization of test-lib and the test repo. Back it up, -# unset and then restore after initialization is finished. -if test -n "$GIT_TEST_GETTEXT_POISON" -then - GIT_TEST_GETTEXT_POISON_ORIG=$GIT_TEST_GETTEXT_POISON - unset GIT_TEST_GETTEXT_POISON -fi - # A call to "unset" with no arguments causes at least Solaris 10 # /usr/xpg4/bin/sh and /bin/ksh to bail out. So keep the unsets # deriving from the command substitution clustered with the other # ones. -unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e ' +unset VISUAL EMAIL LANGUAGE $("$PERL_PATH" -e ' my @env = keys %ENV; my $ok = join("|", qw( TRACE @@ -457,41 +469,13 @@ export EDITOR GIT_DEFAULT_HASH="${GIT_TEST_DEFAULT_HASH:-sha1}" export GIT_DEFAULT_HASH +GIT_TEST_MERGE_ALGORITHM="${GIT_TEST_MERGE_ALGORITHM:-ort}" +export GIT_TEST_MERGE_ALGORITHM # Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output GIT_TRACE_BARE=1 export GIT_TRACE_BARE -check_var_migration () { - # the warnings and hints given from this helper depends - # on end-user settings, which will disrupt the self-test - # done on the test framework itself. - case "$GIT_TEST_FRAMEWORK_SELFTEST" in - t) return ;; - esac - - old_name=$1 new_name=$2 - eval "old_isset=\${${old_name}:+isset}" - eval "new_isset=\${${new_name}:+isset}" - - case "$old_isset,$new_isset" in - isset,) - echo >&2 "warning: $old_name is now $new_name" - echo >&2 "hint: set $new_name too during the transition period" - eval "$new_name=\$$old_name" - ;; - isset,isset) - # do this later - # echo >&2 "warning: $old_name is now $new_name" - # echo >&2 "hint: remove $old_name" - ;; - esac -} - -check_var_migration GIT_FSMONITOR_TEST GIT_TEST_FSMONITOR -check_var_migration TEST_GIT_INDEX_VERSION GIT_TEST_INDEX_VERSION -check_var_migration GIT_FORCE_PRELOAD_TEST GIT_TEST_PRELOAD_INDEX - # Use specific version of the index file format if test -n "${GIT_TEST_INDEX_VERSION:+isset}" then @@ -550,7 +534,7 @@ SQ=\' # when case-folding filenames u200c=$(printf '\342\200\214') -export _x05 _x35 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB ZERO_OID OID_REGEX +export _x05 _x35 LF u200c EMPTY_TREE EMPTY_BLOB ZERO_OID OID_REGEX # Each test should start with something like this, after copyright notices: # @@ -601,20 +585,37 @@ else } fi +USER_TERM="$TERM" TERM=dumb -export TERM +export TERM USER_TERM -error () { - say_color error "error: $*" +_error_exit () { finalize_junit_xml GIT_EXIT_OK=t exit 1 } +error () { + say_color error "error: $*" + _error_exit +} + BUG () { error >&7 "bug in the test script: $*" } +BAIL_OUT () { + test $# -ne 1 && BUG "1 param" + + # Do not change "Bail out! " string. It's part of TAP syntax: + # https://testanything.org/tap-specification.html + local bail_out="Bail out! " + local message="$1" + + say_color error $bail_out "$message" + _error_exit +} + say () { say_color info "$*" } @@ -623,9 +624,7 @@ if test -n "$HARNESS_ACTIVE" then if test "$verbose" = t || test -n "$verbose_only" then - printf 'Bail out! %s\n' \ - 'verbose mode forbidden under TAP harness; try --verbose-log' - exit 1 + BAIL_OUT 'verbose mode forbidden under TAP harness; try --verbose-log' fi fi @@ -735,7 +734,7 @@ test_failure_ () { say_color error "not ok $test_count - $1" shift printf '%s\n' "$*" | sed -e 's/^/# /' - test "$immediate" = "" || { finalize_junit_xml; GIT_EXIT_OK=t; exit 1; } + test "$immediate" = "" || _error_exit } test_known_broken_ok_ () { @@ -764,14 +763,24 @@ match_pattern_list () { arg="$1" shift test -z "$*" && return 1 - for pattern_ - do - case "$arg" in - $pattern_) - return 0 - esac - done - return 1 + # We need to use "$*" to get field-splitting, but we want to + # disable globbing, since we are matching against an arbitrary + # $arg, not what's in the filesystem. Using "set -f" accomplishes + # that, but we must do it in a subshell to avoid impacting the + # rest of the script. The exit value of the subshell becomes + # the function's return value. + ( + set -f + for pattern_ in $* + do + case "$arg" in + $pattern_) + exit 0 + ;; + esac + done + exit 1 + ) } match_test_selector_list () { @@ -880,7 +889,7 @@ maybe_teardown_verbose () { last_verbose=t maybe_setup_verbose () { test -z "$verbose_only" && return - if match_pattern_list $test_count $verbose_only + if match_pattern_list $test_count "$verbose_only" then exec 4>&2 3>&1 # Emit a delimiting blank line when going from @@ -910,7 +919,7 @@ maybe_setup_valgrind () { return fi GIT_VALGRIND_ENABLED= - if match_pattern_list $test_count $valgrind_only + if match_pattern_list $test_count "$valgrind_only" then GIT_VALGRIND_ENABLED=t fi @@ -984,8 +993,11 @@ test_run_ () { trace= # 117 is magic because it is unlikely to match the exit # code of other programs - if $(printf '%s\n' "$1" | sed -f "$GIT_BUILD_DIR/t/chainlint.sed" | grep -q '?![A-Z][A-Z]*?!') || - test "OK-117" != "$(test_eval_ "(exit 117) && $1${LF}${LF}echo OK-\$?" 3>&1)" + if test "OK-117" != "$(test_eval_ "(exit 117) && $1${LF}${LF}echo OK-\$?" 3>&1)" || + { + test "${GIT_TEST_CHAIN_LINT_HARDER:-${GIT_TEST_CHAIN_LINT_HARDER_DEFAULT:-1}}" != 0 && + $(printf '%s\n' "$1" | sed -f "$GIT_BUILD_DIR/t/chainlint.sed" | grep -q '?![A-Z][A-Z]*?!') + } then BUG "broken &&-chain or run-away HERE-DOC: $1" fi @@ -1035,7 +1047,7 @@ test_finish_ () { test_skip () { to_skip= skipped_reason= - if match_pattern_list $this_test.$test_count $GIT_SKIP_TESTS + if match_pattern_list $this_test.$test_count "$GIT_SKIP_TESTS" then to_skip=t skipped_reason="GIT_SKIP_TESTS" @@ -1206,7 +1218,7 @@ test_done () { esac fi - if test -z "$debug" + if test -z "$debug" && test -n "$remove_trash" then test -d "$TRASH_DIRECTORY" || error "Tests passed but trash directory already removed before test cleanup; aborting" @@ -1346,7 +1358,8 @@ fi GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt GIT_CONFIG_NOSYSTEM=1 GIT_ATTR_NOSYSTEM=1 -export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM +GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." +export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM GIT_CEILING_DIRECTORIES if test -z "$GIT_TEST_CMP" then @@ -1371,20 +1384,67 @@ then exit 1 fi +# Are we running this test at all? +remove_trash= +this_test=${0##*/} +this_test=${this_test%%-*} +if match_pattern_list "$this_test" "$GIT_SKIP_TESTS" +then + say_color info >&3 "skipping test $this_test altogether" + skip_all="skip all tests in $this_test" + test_done +fi + +# skip non-whitelisted tests when compiled with SANITIZE=leak +if test -n "$SANITIZE_LEAK" +then + if test_bool_env GIT_TEST_PASSING_SANITIZE_LEAK false + then + # We need to see it in "git env--helper" (via + # test_bool_env) + export TEST_PASSES_SANITIZE_LEAK + + if ! test_bool_env TEST_PASSES_SANITIZE_LEAK false + then + skip_all="skipping $this_test under GIT_TEST_PASSING_SANITIZE_LEAK=true" + test_done + fi + fi +elif test_bool_env GIT_TEST_PASSING_SANITIZE_LEAK false +then + BAIL_OUT "GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak" +fi + +# Last-minute variable setup +USER_HOME="$HOME" +HOME="$TRASH_DIRECTORY" +GNUPGHOME="$HOME/gnupg-home-not-used" +export HOME GNUPGHOME USER_HOME + +# "rm -rf" existing trash directory, even if a previous run left it +# with bad permissions. +remove_trash_directory () { + dir="$1" + if ! rm -rf "$dir" 2>/dev/null + then + chmod -R u+rwx "$dir" + rm -rf "$dir" + fi + ! test -d "$dir" +} + # Test repository -rm -fr "$TRASH_DIRECTORY" || { +remove_trash_directory "$TRASH_DIRECTORY" || { GIT_EXIT_OK=t echo >&5 "FATAL: Cannot prepare test area" exit 1 } -HOME="$TRASH_DIRECTORY" -GNUPGHOME="$HOME/gnupg-home-not-used" -export HOME GNUPGHOME - +remove_trash=t if test -z "$TEST_NO_CREATE_REPO" then - test_create_repo "$TRASH_DIRECTORY" + git init "$TRASH_DIRECTORY" >&3 2>&4 || + error "cannot run git init" else mkdir -p "$TRASH_DIRECTORY" fi @@ -1393,15 +1453,6 @@ fi # in subprocesses like git equals our $PWD (for pathname comparisons). cd -P "$TRASH_DIRECTORY" || exit 1 -this_test=${0##*/} -this_test=${this_test%%-*} -if match_pattern_list "$this_test" $GIT_SKIP_TESTS -then - say_color info >&3 "skipping test $this_test altogether" - skip_all="skip all tests in $this_test" - test_done -fi - if test -n "$write_junit_xml" then junit_xml_dir="$TEST_OUTPUT_DIRECTORY/out" @@ -1420,10 +1471,9 @@ then fi # Convenience -# A regexp to match 5, 35 and 40 hexdigits +# A regexp to match 5 and 35 hexdigits _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' _x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05" -_x40="$_x35$_x05" test_oid_init @@ -1432,7 +1482,6 @@ OID_REGEX=$(echo $ZERO_OID | sed -e 's/0/[0-9a-f]/g') OIDPATH_REGEX=$(test_oid_to_path $ZERO_OID | sed -e 's/0/[0-9a-f]/g') EMPTY_TREE=$(test_oid empty_tree) EMPTY_BLOB=$(test_oid empty_blob) -_z40=$ZERO_OID # Provide an implementation of the 'yes' utility; the upper bound # limit is there to help Windows that cannot stop this loop from @@ -1496,6 +1545,7 @@ case $uname_s in test_set_prereq NATIVE_CRLF test_set_prereq SED_STRIPS_CR test_set_prereq GREP_STRIPS_CR + test_set_prereq WINDOWS GIT_TEST_CMP=mingw_test_cmp ;; *CYGWIN*) @@ -1504,6 +1554,7 @@ case $uname_s in test_set_prereq CYGWIN test_set_prereq SED_STRIPS_CR test_set_prereq GREP_STRIPS_CR + test_set_prereq WINDOWS ;; *) test_set_prereq POSIXPERM @@ -1520,25 +1571,16 @@ parisc* | hppa*) ;; esac +test_set_prereq REFFILES + ( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1 test -z "$NO_PERL" && test_set_prereq PERL test -z "$NO_PTHREADS" && test_set_prereq PTHREADS test -z "$NO_PYTHON" && test_set_prereq PYTHON -test -n "$USE_LIBPCRE1$USE_LIBPCRE2" && test_set_prereq PCRE -test -n "$USE_LIBPCRE1" && test_set_prereq LIBPCRE1 +test -n "$USE_LIBPCRE2" && test_set_prereq PCRE test -n "$USE_LIBPCRE2" && test_set_prereq LIBPCRE2 test -z "$NO_GETTEXT" && test_set_prereq GETTEXT - -if test -n "$GIT_TEST_GETTEXT_POISON_ORIG" -then - GIT_TEST_GETTEXT_POISON=$GIT_TEST_GETTEXT_POISON_ORIG - export GIT_TEST_GETTEXT_POISON - unset GIT_TEST_GETTEXT_POISON_ORIG -fi - -test_lazy_prereq C_LOCALE_OUTPUT ' - ! test_bool_env GIT_TEST_GETTEXT_POISON false -' +test -n "$SANITIZE_LEAK" && test_set_prereq SANITIZE_LEAK if test -z "$GIT_TEST_CHECK_CACHE_TREE" then @@ -1557,6 +1599,12 @@ test_lazy_prereq SYMLINKS ' ln -s x y && test -h y ' +test_lazy_prereq SYMLINKS_WINDOWS ' + # test whether symbolic links are enabled on Windows + test_have_prereq MINGW && + cmd //c "mklink y x" &> /dev/null && test -h y +' + test_lazy_prereq FILEMODE ' test "$(git config --bool core.filemode)" = true ' @@ -1686,6 +1734,10 @@ build_option () { sed -ne "s/^$1: //p" } +test_lazy_prereq SIZE_T_IS_64BIT ' + test 8 -eq "$(build_option sizeof-size_t)" +' + test_lazy_prereq LONG_IS_64BIT ' test 8 -le "$(build_option sizeof-long)" ' @@ -1708,10 +1760,6 @@ test_lazy_prereq SHA1 ' esac ' -test_lazy_prereq REBASE_P ' - test -z "$GIT_TEST_SKIP_REBASE_P" -' - # Ensure that no test accidentally triggers a Git command # that runs the actual maintenance scheduler, affecting a user's # system permanently. |