diff options
Diffstat (limited to 't/test-lib.sh')
| -rw-r--r-- | t/test-lib.sh | 682 |
1 files changed, 552 insertions, 130 deletions
diff --git a/t/test-lib.sh b/t/test-lib.sh index bb4f8865b2..16c4d7b516 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -1,4 +1,4 @@ -#!/bin/sh +# Test framework for git. See t/README for usage. # # Copyright (c) 2005 Junio C Hamano # @@ -15,25 +15,6 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see http://www.gnu.org/licenses/ . -# if --tee was passed, write the output not only to the terminal, but -# additionally to the file test-results/$BASENAME.out, too. -case "$GIT_TEST_TEE_STARTED, $* " in -done,*) - # do not redirect again - ;; -*' --tee '*|*' --va'*) - mkdir -p test-results - BASE=test-results/$(basename "$0" .sh) - (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1; - echo $? > $BASE.exit) | tee $BASE.out - test "$(cat $BASE.exit)" = 0 - exit - ;; -esac - -# Keep the original TERM for say_color -ORIGINAL_TERM=$TERM - # Test the binaries we have just built. The tests are kept in # t/ subdirectory and are run in 'trash directory' subdirectory. if test -z "$TEST_DIRECTORY" @@ -42,6 +23,10 @@ then # outside of t/, e.g. for running tests on the test library # itself. TEST_DIRECTORY=$(pwd) +else + # ensure that TEST_DIRECTORY is an absolute path so that it + # is valid even if the current working directory is changed + TEST_DIRECTORY=$(cd "$TEST_DIRECTORY" && pwd) || exit 1 fi if test -z "$TEST_OUTPUT_DIRECTORY" then @@ -51,16 +36,41 @@ then fi GIT_BUILD_DIR="$TEST_DIRECTORY"/.. +################################################################ +# It appears that people try to run tests without building... +"$GIT_BUILD_DIR/git" >/dev/null +if test $? != 1 +then + echo >&2 'error: you do not seem to have built git yet.' + exit 1 +fi + . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS export PERL_PATH SHELL_PATH +# if --tee was passed, write the output not only to the terminal, but +# additionally to the file test-results/$BASENAME.out, too. +case "$GIT_TEST_TEE_STARTED, $* " in +done,*) + # do not redirect again + ;; +*' --tee '*|*' --va'*) + mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results" + BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)" + (GIT_TEST_TEE_STARTED=done ${SHELL_PATH} "$0" "$@" 2>&1; + echo $? > $BASE.exit) | tee $BASE.out + test "$(cat $BASE.exit)" = 0 + exit + ;; +esac + # For repeatability, reset the environment to known value. +# TERM is sanitized below, after saving color control sequences. LANG=C LC_ALL=C PAGER=cat TZ=UTC -TERM=dumb -export LANG LC_ALL PAGER TERM TZ +export LANG LC_ALL PAGER TZ EDITOR=: # A call to "unset" with no arguments causes at least Solaris 10 # /usr/xpg4/bin/sh and /bin/ksh to bail out. So keep the unsets @@ -76,12 +86,15 @@ unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e ' .*_TEST PROVE VALGRIND - PERF_AGGREGATING_LATER + UNZIP + PERF_ + CURL_VERBOSE )); my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); print join("\n", @vars); ') unset XDG_CONFIG_HOME +unset GITPERLLIB GIT_AUTHOR_EMAIL=author@example.com GIT_AUTHOR_NAME='A U Thor' GIT_COMMITTER_EMAIL=committer@example.com @@ -93,19 +106,51 @@ export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME export EDITOR +# Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output +GIT_TRACE_BARE=1 +export GIT_TRACE_BARE + +if test -n "${TEST_GIT_INDEX_VERSION:+isset}" +then + GIT_INDEX_VERSION="$TEST_GIT_INDEX_VERSION" + export GIT_INDEX_VERSION +fi + +# Add libc MALLOC and MALLOC_PERTURB test +# only if we are not executing the test with valgrind +if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null || + test -n "$TEST_NO_MALLOC_CHECK" +then + setup_malloc_check () { + : nothing + } + teardown_malloc_check () { + : nothing + } +else + setup_malloc_check () { + MALLOC_CHECK_=3 MALLOC_PERTURB_=165 + export MALLOC_CHECK_ MALLOC_PERTURB_ + } + teardown_malloc_check () { + unset MALLOC_CHECK_ MALLOC_PERTURB_ + } +fi + +: ${ASAN_OPTIONS=detect_leaks=0} +export ASAN_OPTIONS + # Protect ourselves from common misconfiguration to export # CDPATH into the environment unset CDPATH unset GREP_OPTIONS +unset UNZIP case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in - 1|2|true) - echo "* warning: Some tests will not work if GIT_TRACE" \ - "is set as to trace on STDERR ! *" - echo "* warning: Please set GIT_TRACE to something" \ - "other than 1, 2 or true ! *" - ;; +1|2|true) + GIT_TRACE=4 + ;; esac # Convenience @@ -121,7 +166,11 @@ _z40=0000000000000000000000000000000000000000 LF=' ' -export _x05 _x40 _z40 LF +# UTF-8 ZERO WIDTH NON-JOINER, which HFS+ ignores +# when case-folding filenames +u200c=$(printf '\342\200\214') + +export _x05 _x40 _z40 LF u200c # Each test should start with something like this, after copyright notices: # @@ -129,10 +178,8 @@ export _x05 _x40 _z40 LF # This test checks if command xyzzy does the right thing... # ' # . ./test-lib.sh -[ "x$ORIGINAL_TERM" != "xdumb" ] && ( - TERM=$ORIGINAL_TERM && - export TERM && - [ -t 1 ] && +test "x$TERM" != "xdumb" && ( + test -t 1 && tput bold >/dev/null 2>&1 && tput setaf 1 >/dev/null 2>&1 && tput sgr0 >/dev/null 2>&1 @@ -148,10 +195,21 @@ do immediate=t; shift ;; -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;; + -r) + shift; test "$#" -ne 0 || { + echo 'error: -r requires an argument' >&2; + exit 1; + } + run_list=$1; shift ;; + --run=*) + run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;; -h|--h|--he|--hel|--help) help=t; shift ;; -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) verbose=t; shift ;; + --verbose-only=*) + verbose_only=$(expr "z$1" : 'z[^=]*=\(.*\)') + shift ;; -q|--q|--qu|--qui|--quie|--quiet) # Ignore --quiet under a TAP::Harness. Saying how many tests # passed without the ok/not ok details is always an error. @@ -161,43 +219,81 @@ do --no-color) color=; shift ;; --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind) - valgrind=t; verbose=t; shift ;; + valgrind=memcheck + shift ;; + --valgrind=*) + valgrind=$(expr "z$1" : 'z[^=]*=\(.*\)') + shift ;; + --valgrind-only=*) + valgrind_only=$(expr "z$1" : 'z[^=]*=\(.*\)') + shift ;; --tee) shift ;; # was handled already --root=*) root=$(expr "z$1" : 'z[^=]*=\(.*\)') shift ;; + --chain-lint) + GIT_TEST_CHAIN_LINT=1 + shift ;; + --no-chain-lint) + GIT_TEST_CHAIN_LINT=0 + shift ;; + -x) + trace=t + verbose=t + shift ;; *) echo "error: unknown test option '$1'" >&2; exit 1 ;; esac done -if test -n "$color"; then +if test -n "$valgrind_only" +then + test -z "$valgrind" && valgrind=memcheck + test -z "$verbose" && verbose_only="$valgrind_only" +elif test -n "$valgrind" +then + verbose=t +fi + +if test -n "$color" +then + # Save the color control sequences now rather than run tput + # each time say_color() is called. This is done for two + # reasons: + # * TERM will be changed to dumb + # * HOME will be changed to a temporary directory and tput + # might need to read ~/.terminfo from the original HOME + # directory to get the control sequences + # Note: This approach assumes the control sequences don't end + # in a newline for any terminal of interest (command + # substitutions strip trailing newlines). Given that most + # (all?) terminals in common use are related to ECMA-48, this + # shouldn't be a problem. + say_color_error=$(tput bold; tput setaf 1) # bold red + say_color_skip=$(tput setaf 4) # blue + say_color_warn=$(tput setaf 3) # brown/yellow + say_color_pass=$(tput setaf 2) # green + say_color_info=$(tput setaf 6) # cyan + say_color_reset=$(tput sgr0) + say_color_="" # no formatting for normal text say_color () { - ( - TERM=$ORIGINAL_TERM - export TERM - case "$1" in - error) tput bold; tput setaf 1;; # bold red - skip) tput bold; tput setaf 2;; # bold green - pass) tput setaf 2;; # green - info) tput setaf 3;; # brown - *) test -n "$quiet" && return;; - esac + test -z "$1" && test -n "$quiet" && return + eval "say_color_color=\$say_color_$1" shift - printf "%s" "$*" - tput sgr0 - echo - ) + printf "%s\\n" "$say_color_color$*$say_color_reset" } else say_color() { test -z "$1" && test -n "$quiet" && return shift - echo "$*" + printf "%s\n" "$*" } fi +TERM=dumb +export TERM + error () { say_color error "error: $*" GIT_EXIT_OK=t @@ -213,7 +309,7 @@ error "Test script did not set test_description." if test "$help" = "t" then - echo "$test_description" + printf '%s\n' "$test_description" exit 0 fi @@ -247,13 +343,14 @@ die () { GIT_EXIT_OK= trap 'die' EXIT +trap 'exit $?' INT # The user-facing functions are loaded from a separate file so that # test_perf subshells can have them too . "$TEST_DIRECTORY/test-lib-functions.sh" # You are not expected to call test_ok_ and test_failure_ directly, use -# the text_expect_* functions instead. +# the test_expect_* functions instead. test_ok_ () { test_success=$(($test_success + 1)) @@ -262,74 +359,297 @@ test_ok_ () { test_failure_ () { test_failure=$(($test_failure + 1)) - say_color error "not ok - $test_count $1" + say_color error "not ok $test_count - $1" shift - echo "$@" | sed -e 's/^/# /' + printf '%s\n' "$*" | sed -e 's/^/# /' test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; } } test_known_broken_ok_ () { test_fixed=$(($test_fixed+1)) - say_color "" "ok $test_count - $@ # TODO known breakage" + say_color error "ok $test_count - $@ # TODO known breakage vanished" } test_known_broken_failure_ () { test_broken=$(($test_broken+1)) - say_color skip "not ok $test_count - $@ # TODO known breakage" + say_color warn "not ok $test_count - $@ # TODO known breakage" } test_debug () { test "$debug" = "" || eval "$1" } +match_pattern_list () { + arg="$1" + shift + test -z "$*" && return 1 + for pattern_ + do + case "$arg" in + $pattern_) + return 0 + esac + done + return 1 +} + +match_test_selector_list () { + title="$1" + shift + arg="$1" + shift + test -z "$1" && return 0 + + # Both commas and whitespace are accepted as separators. + OLDIFS=$IFS + IFS=' ,' + set -- $1 + IFS=$OLDIFS + + # If the first selector is negative we include by default. + include= + case "$1" in + !*) include=t ;; + esac + + for selector + do + orig_selector=$selector + + positive=t + case "$selector" in + !*) + positive= + selector=${selector##?} + ;; + esac + + test -z "$selector" && continue + + case "$selector" in + *-*) + if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in range" \ + "start: '$orig_selector'" >&2 + exit 1 + fi + if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in range" \ + "end: '$orig_selector'" >&2 + exit 1 + fi + ;; + *) + if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null + then + echo "error: $title: invalid non-numeric in test" \ + "selector: '$orig_selector'" >&2 + exit 1 + fi + esac + + # Short cut for "obvious" cases + test -z "$include" && test -z "$positive" && continue + test -n "$include" && test -n "$positive" && continue + + case "$selector" in + -*) + if test $arg -le ${selector#-} + then + include=$positive + fi + ;; + *-) + if test $arg -ge ${selector%-} + then + include=$positive + fi + ;; + *-*) + if test ${selector%%-*} -le $arg \ + && test $arg -le ${selector#*-} + then + include=$positive + fi + ;; + *) + if test $arg -eq $selector + then + include=$positive + fi + ;; + esac + done + + test -n "$include" +} + +maybe_teardown_verbose () { + test -z "$verbose_only" && return + exec 4>/dev/null 3>/dev/null + verbose= +} + +last_verbose=t +maybe_setup_verbose () { + test -z "$verbose_only" && return + if match_pattern_list $test_count $verbose_only + then + exec 4>&2 3>&1 + # Emit a delimiting blank line when going from + # non-verbose to verbose. Within verbose mode the + # delimiter is printed by test_expect_*. The choice + # of the initial $last_verbose is such that before + # test 1, we do not print it. + test -z "$last_verbose" && echo >&3 "" + verbose=t + else + exec 4>/dev/null 3>/dev/null + verbose= + fi + last_verbose=$verbose +} + +maybe_teardown_valgrind () { + test -z "$GIT_VALGRIND" && return + GIT_VALGRIND_ENABLED= +} + +maybe_setup_valgrind () { + test -z "$GIT_VALGRIND" && return + if test -z "$valgrind_only" + then + GIT_VALGRIND_ENABLED=t + return + fi + GIT_VALGRIND_ENABLED= + if match_pattern_list $test_count $valgrind_only + then + GIT_VALGRIND_ENABLED=t + fi +} + +want_trace () { + test "$trace" = t && test "$verbose" = t +} + +# This is a separate function because some tests use +# "return" to end a test_expect_success block early +# (and we want to make sure we run any cleanup like +# "set +x"). +test_eval_inner_ () { + # Do not add anything extra (including LF) after '$*' + eval " + want_trace && set -x + $*" +} + test_eval_ () { - # This is a separate function because some tests use - # "return" to end a test_expect_success block early. - eval </dev/null >&3 2>&4 "$*" + # We run this block with stderr redirected to avoid extra cruft + # during a "-x" trace. Once in "set -x" mode, we cannot prevent + # the shell from printing the "set +x" to turn it off (nor the saving + # of $? before that). But we can make sure that the output goes to + # /dev/null. + # + # The test itself is run with stderr put back to &4 (so either to + # /dev/null, or to the original stderr if --verbose was used). + { + test_eval_inner_ "$@" </dev/null >&3 2>&4 + test_eval_ret_=$? + if want_trace + then + set +x + if test "$test_eval_ret_" != 0 + then + say_color error >&4 "error: last command exited with \$?=$test_eval_ret_" + fi + fi + } 2>/dev/null + return $test_eval_ret_ } test_run_ () { test_cleanup=: expecting_failure=$2 + + if test "${GIT_TEST_CHAIN_LINT:-1}" != 0; then + # turn off tracing for this test-eval, as it simply creates + # confusing noise in the "-x" output + trace_tmp=$trace + trace= + # 117 is magic because it is unlikely to match the exit + # code of other programs + test_eval_ "(exit 117) && $1" + if test "$?" != 117; then + error "bug in the test script: broken &&-chain: $1" + fi + trace=$trace_tmp + fi + + setup_malloc_check test_eval_ "$1" eval_ret=$? + teardown_malloc_check - if test -z "$immediate" || test $eval_ret = 0 || test -n "$expecting_failure" + if test -z "$immediate" || test $eval_ret = 0 || + test -n "$expecting_failure" && test "$test_cleanup" != ":" then + setup_malloc_check test_eval_ "$test_cleanup" + teardown_malloc_check fi - if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"; then + if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE" + then echo "" fi return "$eval_ret" } -test_skip () { +test_start_ () { test_count=$(($test_count+1)) + maybe_setup_verbose + maybe_setup_valgrind +} + +test_finish_ () { + echo >&3 "" + maybe_teardown_valgrind + maybe_teardown_verbose +} + +test_skip () { to_skip= - for skp in $GIT_SKIP_TESTS - do - case $this_test.$test_count in - $skp) - to_skip=t - break - esac - done + skipped_reason= + if match_pattern_list $this_test.$test_count $GIT_SKIP_TESTS + then + to_skip=t + skipped_reason="GIT_SKIP_TESTS" + fi if test -z "$to_skip" && test -n "$test_prereq" && ! test_have_prereq "$test_prereq" then to_skip=t - fi - case "$to_skip" in - t) + of_prereq= if test "$missing_prereq" != "$test_prereq" then of_prereq=" of $test_prereq" fi + skipped_reason="missing $missing_prereq${of_prereq}" + fi + if test -z "$to_skip" && test -n "$run_list" && + ! match_test_selector_list '--run' $test_count "$run_list" + then + to_skip=t + skipped_reason="--run" + fi + case "$to_skip" in + t) say_color skip >&3 "skipping test: $@" - say_color skip "ok $test_count # skip $1 (missing $missing_prereq${of_prereq})" + say_color skip "ok $test_count # skip $1 ($skipped_reason)" : true ;; *) @@ -346,10 +666,12 @@ test_at_end_hook_ () { test_done () { GIT_EXIT_OK=t - if test -z "$HARNESS_ACTIVE"; then + if test -z "$HARNESS_ACTIVE" + then test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results" mkdir -p "$test_results_dir" - test_results_path="$test_results_dir/${0%.sh}-$$.counts" + base=${0##*/} + test_results_path="$test_results_dir/${base%.sh}-$$.counts" cat >>"$test_results_path" <<-EOF total $test_count @@ -363,22 +685,35 @@ test_done () { if test "$test_fixed" != 0 then - say_color pass "# fixed $test_fixed known breakage(s)" + say_color error "# $test_fixed known breakage(s) vanished; please update test(s)" fi if test "$test_broken" != 0 then - say_color error "# still have $test_broken known breakage(s)" - msg="remaining $(($test_count-$test_broken)) test(s)" + say_color warn "# still have $test_broken known breakage(s)" + fi + if test "$test_broken" != 0 || test "$test_fixed" != 0 + then + test_remaining=$(( $test_count - $test_broken - $test_fixed )) + msg="remaining $test_remaining test(s)" else + test_remaining=$test_count msg="$test_count test(s)" fi case "$test_failure" in 0) # Maybe print SKIP message - [ -z "$skip_all" ] || skip_all=" # SKIP $skip_all" + if test -n "$skip_all" && test $test_count -gt 0 + then + error "Can't use skip_all after running some tests" + fi + test -z "$skip_all" || skip_all=" # SKIP $skip_all" - if test $test_external_has_tap -eq 0; then - say_color pass "# passed all $msg" + if test $test_external_has_tap -eq 0 + then + if test $test_remaining -gt 0 + then + say_color pass "# passed all $msg" + fi say "1..$test_count$skip_all" fi @@ -391,7 +726,8 @@ test_done () { exit 0 ;; *) - if test $test_external_has_tap -eq 0; then + if test $test_external_has_tap -eq 0 + then say_color error "# failed $test_failure among $msg" say "1..$test_count" fi @@ -424,11 +760,9 @@ then make_valgrind_symlink () { # handle only executables, unless they are shell libraries that - # need to be in the exec-path. We will just use "#!" as a - # guess for a shell-script, since we have no idea what the user - # may have configured as the shell path. + # need to be in the exec-path. test -x "$1" || - test "#!" = "$(head -c 2 <"$1")" || + test "# " = "$(head -c 2 <"$1")" || return; base=$(basename "$1") @@ -471,27 +805,35 @@ then PATH=$GIT_VALGRIND/bin:$PATH GIT_EXEC_PATH=$GIT_VALGRIND/bin export GIT_VALGRIND -elif test -n "$GIT_TEST_INSTALLED" ; then + GIT_VALGRIND_MODE="$valgrind" + export GIT_VALGRIND_MODE + GIT_VALGRIND_ENABLED=t + test -n "$valgrind_only" && GIT_VALGRIND_ENABLED= + export GIT_VALGRIND_ENABLED +elif test -n "$GIT_TEST_INSTALLED" +then GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path) || error "Cannot run git from $GIT_TEST_INSTALLED." PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR:$PATH GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH} else # normal case, use ../bin-wrappers only unless $with_dashes: git_bin_dir="$GIT_BUILD_DIR/bin-wrappers" - if ! test -x "$git_bin_dir/git" ; then - if test -z "$with_dashes" ; then + if ! test -x "$git_bin_dir/git" + then + if test -z "$with_dashes" + then say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH" fi with_dashes=t fi PATH="$git_bin_dir:$PATH" GIT_EXEC_PATH=$GIT_BUILD_DIR - if test -n "$with_dashes" ; then + if test -n "$with_dashes" + then PATH="$GIT_BUILD_DIR:$PATH" fi fi GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt -unset GIT_CONFIG GIT_CONFIG_NOSYSTEM=1 GIT_ATTR_NOSYSTEM=1 export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM @@ -512,58 +854,49 @@ test -d "$GIT_BUILD_DIR"/templates/blt || { error "You haven't built things yet, have you?" } -if test -z "$GIT_TEST_INSTALLED" && test -z "$NO_PYTHON" +if ! test -x "$GIT_BUILD_DIR"/test-chmtime then - GITPYTHONLIB="$GIT_BUILD_DIR/git_remote_helpers/build/lib" - export GITPYTHONLIB - test -d "$GIT_BUILD_DIR"/git_remote_helpers/build || { - error "You haven't built git_remote_helpers yet, have you?" - } -fi - -if ! test -x "$GIT_BUILD_DIR"/test-chmtime; then echo >&2 'You need to build test-chmtime:' echo >&2 'Run "make test-chmtime" in the source (toplevel) directory' exit 1 fi # Test repository -test="trash directory.$(basename "$0" .sh)" -test -n "$root" && test="$root/$test" -case "$test" in -/*) TRASH_DIRECTORY="$test" ;; - *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$test" ;; +TRASH_DIRECTORY="trash directory.$(basename "$0" .sh)" +test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY" +case "$TRASH_DIRECTORY" in +/*) ;; # absolute path is good + *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;; esac test ! -z "$debug" || remove_trash=$TRASH_DIRECTORY -rm -fr "$test" || { +rm -fr "$TRASH_DIRECTORY" || { GIT_EXIT_OK=t echo >&5 "FATAL: Cannot prepare test area" exit 1 } HOME="$TRASH_DIRECTORY" -export HOME +GNUPGHOME="$HOME/gnupg-home-not-used" +export HOME GNUPGHOME -if test -z "$TEST_NO_CREATE_REPO"; then - test_create_repo "$test" +if test -z "$TEST_NO_CREATE_REPO" +then + test_create_repo "$TRASH_DIRECTORY" else - mkdir -p "$test" + mkdir -p "$TRASH_DIRECTORY" fi # Use -P to resolve symlinks in our working directory so that the cwd # in subprocesses like git equals our $PWD (for pathname comparisons). -cd -P "$test" || exit 1 +cd -P "$TRASH_DIRECTORY" || exit 1 this_test=${0##*/} this_test=${this_test%%-*} -for skp in $GIT_SKIP_TESTS -do - case "$this_test" in - $skp) - say_color skip >&3 "skipping test $this_test altogether" - skip_all="skip all tests in $this_test" - test_done - esac -done +if match_pattern_list "$this_test" $GIT_SKIP_TESTS +then + say_color info >&3 "skipping test $this_test altogether" + skip_all="skip all tests in $this_test" + test_done +fi # Provide an implementation of the 'yes' utility yes () { @@ -601,19 +934,22 @@ case $(uname -s) in # backslashes in pathspec are converted to '/' # exec does not inherit the PID test_set_prereq MINGW + test_set_prereq NATIVE_CRLF test_set_prereq SED_STRIPS_CR + test_set_prereq GREP_STRIPS_CR + GIT_TEST_CMP=mingw_test_cmp ;; *CYGWIN*) test_set_prereq POSIXPERM test_set_prereq EXECKEEPSPID - test_set_prereq NOT_MINGW + test_set_prereq CYGWIN test_set_prereq SED_STRIPS_CR + test_set_prereq GREP_STRIPS_CR ;; *) test_set_prereq POSIXPERM test_set_prereq BSLASHPSPEC test_set_prereq EXECKEEPSPID - test_set_prereq NOT_MINGW ;; esac @@ -659,10 +995,96 @@ test_i18ngrep () { fi } -# test whether the filesystem supports symbolic links -ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS -rm -f y +test_lazy_prereq PIPE ' + # test whether the filesystem supports FIFOs + case $(uname -s) in + CYGWIN*) + false + ;; + *) + rm -f testfifo && mkfifo testfifo + ;; + esac +' + +test_lazy_prereq SYMLINKS ' + # test whether the filesystem supports symbolic links + ln -s x y && test -h y +' + +test_lazy_prereq FILEMODE ' + test "$(git config --bool core.filemode)" = true +' + +test_lazy_prereq CASE_INSENSITIVE_FS ' + echo good >CamelCase && + echo bad >camelcase && + test "$(cat CamelCase)" != good +' + +test_lazy_prereq UTF8_NFD_TO_NFC ' + # check whether FS converts nfd unicode to nfc + auml=$(printf "\303\244") + aumlcdiar=$(printf "\141\314\210") + >"$auml" && + case "$(echo *)" in + "$aumlcdiar") + true ;; + *) + false ;; + esac +' + +test_lazy_prereq AUTOIDENT ' + sane_unset GIT_AUTHOR_NAME && + sane_unset GIT_AUTHOR_EMAIL && + git var GIT_AUTHOR_IDENT +' + +test_lazy_prereq EXPENSIVE ' + test -n "$GIT_TEST_LONG" +' + +test_lazy_prereq USR_BIN_TIME ' + test -x /usr/bin/time +' + +test_lazy_prereq NOT_ROOT ' + uid=$(id -u) && + test "$uid" != 0 +' + +# On a filesystem that lacks SANITY, a file can be deleted even if +# the containing directory doesn't have write permissions, or a file +# can be accessed even if the containing directory doesn't have read +# or execute permissions, causing our tests that validate that Git +# works sensibly in such situations. +test_lazy_prereq SANITY ' + mkdir SANETESTD.1 SANETESTD.2 && + + chmod +w SANETESTD.1 SANETESTD.2 && + >SANETESTD.1/x 2>SANETESTD.2/x && + chmod -w SANETESTD.1 && + chmod -rx SANETESTD.2 || + error "bug in test sript: cannot prepare SANETESTD" + + ! rm SANETESTD.1/x && ! test -f SANETESTD.2/x + status=$? + + chmod +rwx SANETESTD.1 SANETESTD.2 && + rm -rf SANETESTD.1 SANETESTD.2 || + error "bug in test sript: cannot clean SANETESTD" + return $status +' + +GIT_UNZIP=${GIT_UNZIP:-unzip} +test_lazy_prereq UNZIP ' + "$GIT_UNZIP" -v + test $? -ne 127 +' + +run_with_limited_cmdline () { + (ulimit -s 128 && "$@") +} -# When the tests are run as root, permission tests will report that -# things are writable when they shouldn't be. -test -w / || test_set_prereq SANITY +test_lazy_prereq CMDLINE_LIMIT 'run_with_limited_cmdline true' |