diff options
Diffstat (limited to 't/test-lib-functions.sh')
| -rw-r--r-- | t/test-lib-functions.sh | 311 |
1 files changed, 277 insertions, 34 deletions
diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 1701fe2a06..6b3bbf99e4 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -42,6 +42,8 @@ test_decode_color () { function name(n) { if (n == 0) return "RESET"; if (n == 1) return "BOLD"; + if (n == 2) return "FAINT"; + if (n == 3) return "ITALIC"; if (n == 7) return "REVERSE"; if (n == 30) return "BLACK"; if (n == 31) return "RED"; @@ -145,12 +147,28 @@ test_pause () { "$SHELL_PATH" <&6 >&5 2>&7 } -# Wrap git in gdb. Adding this to a command can make it easier to -# understand what is going on in a failing test. +# Wrap git with a debugger. Adding this to a command can make it easier +# to understand what is going on in a failing test. # -# Example: "debug git checkout master". +# Examples: +# debug git checkout master +# debug --debugger=nemiver git $ARGS +# debug -d "valgrind --tool=memcheck --track-origins=yes" git $ARGS debug () { - GIT_TEST_GDB=1 "$@" <&6 >&5 2>&7 + case "$1" in + -d) + GIT_DEBUGGER="$2" && + shift 2 + ;; + --debugger=*) + GIT_DEBUGGER="${1#*=}" && + shift 1 + ;; + *) + GIT_DEBUGGER=1 + ;; + esac && + GIT_DEBUGGER="${GIT_DEBUGGER}" "$@" <&6 >&5 2>&7 } # Call test_commit with the arguments @@ -278,8 +296,20 @@ write_script () { # The single parameter is the prerequisite tag (a simple word, in all # capital letters by convention). +test_unset_prereq () { + ! test_have_prereq "$1" || + satisfied_prereq="${satisfied_prereq% $1 *} ${satisfied_prereq#* $1 }" +} + test_set_prereq () { - satisfied_prereq="$satisfied_prereq$1 " + case "$1" in + !*) + test_unset_prereq "${1#!}" + ;; + *) + satisfied_prereq="$satisfied_prereq$1 " + ;; + esac } satisfied_prereq=" " lazily_testable_prereq= lazily_tested_prereq= @@ -388,14 +418,14 @@ test_declared_prereq () { test_verify_prereq () { test -z "$test_prereq" || expr >/dev/null "$test_prereq" : '[A-Z0-9_,!]*$' || - error "bug in the test script: '$test_prereq' does not look like a prereq" + BUG "'$test_prereq' does not look like a prereq" } test_expect_failure () { test_start_ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || - error "bug in the test script: not 2 or 3 parameters to test-expect-failure" + BUG "not 2 or 3 parameters to test-expect-failure" test_verify_prereq export test_prereq if ! test_skip "$@" @@ -415,7 +445,7 @@ test_expect_success () { test_start_ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || - error "bug in the test script: not 2 or 3 parameters to test-expect-success" + BUG "not 2 or 3 parameters to test-expect-success" test_verify_prereq export test_prereq if ! test_skip "$@" @@ -442,7 +472,7 @@ test_expect_success () { test_external () { test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 3 || - error >&5 "bug in the test script: not 3 or 4 parameters to test_external" + BUG "not 3 or 4 parameters to test_external" descr="$1" shift test_verify_prereq @@ -537,6 +567,14 @@ test_path_is_dir () { fi } +test_path_exists () { + if ! test -e "$1" + then + echo "Path $1 doesn't exist. $2" + false + fi +} + # Check if the directory exists and is empty as expected, barf otherwise. test_dir_is_empty () { test_path_is_dir "$1" && @@ -575,7 +613,7 @@ test_path_is_missing () { test_line_count () { if test $# != 3 then - error "bug in the test script: not 3 parameters to test_line_count" + BUG "not 3 parameters to test_line_count" elif ! test $(wc -l <"$3") "$1" "$2" then echo "test_line_count: line count for $3 !$1 $2" @@ -610,6 +648,14 @@ list_contains () { # # Writing this as "! git checkout ../outerspace" is wrong, because # the failure could be due to a segv. We want a controlled failure. +# +# Accepts the following options: +# +# ok=<signal-name>[,<...>]: +# Don't treat an exit caused by the given signal as error. +# Multiple signals can be specified as a comma separated list. +# Currently recognized signal names are: sigpipe, success. +# (Don't use 'success', use 'test_might_fail' instead.) test_must_fail () { case "$1" in @@ -621,30 +667,30 @@ test_must_fail () { _test_ok= ;; esac - "$@" + "$@" 2>&7 exit_code=$? if test $exit_code -eq 0 && ! list_contains "$_test_ok" success then - echo >&2 "test_must_fail: command succeeded: $*" + echo >&4 "test_must_fail: command succeeded: $*" return 1 elif test_match_signal 13 $exit_code && list_contains "$_test_ok" sigpipe then return 0 elif test $exit_code -gt 129 && test $exit_code -le 192 then - echo >&2 "test_must_fail: died by signal $(($exit_code - 128)): $*" + echo >&4 "test_must_fail: died by signal $(($exit_code - 128)): $*" return 1 elif test $exit_code -eq 127 then - echo >&2 "test_must_fail: command not found: $*" + echo >&4 "test_must_fail: command not found: $*" return 1 elif test $exit_code -eq 126 then - echo >&2 "test_must_fail: valgrind error: $*" + echo >&4 "test_must_fail: valgrind error: $*" return 1 fi return 0 -} +} 7>&2 2>&4 # Similar to test_must_fail, but tolerates success, too. This is # meant to be used in contexts like: @@ -656,10 +702,12 @@ test_must_fail () { # # Writing "git config --unset all.configuration || :" would be wrong, # because we want to notice if it fails due to segv. +# +# Accepts the same options as test_must_fail. test_might_fail () { - test_must_fail ok=success "$@" -} + test_must_fail ok=success "$@" 2>&7 +} 7>&2 2>&4 # Similar to test_must_fail and test_might_fail, but check that a # given command exited with a given exit code. Meant to be used as: @@ -671,16 +719,16 @@ test_might_fail () { test_expect_code () { want_code=$1 shift - "$@" + "$@" 2>&7 exit_code=$? if test $exit_code = $want_code then return 0 fi - echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" + echo >&4 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" return 1 -} +} 7>&2 2>&4 # test_cmp is a helper function to compare actual and expected output. # You can use it like: @@ -699,18 +747,94 @@ test_cmp() { $GIT_TEST_CMP "$@" } +# Check that the given config key has the expected value. +# +# test_cmp_config [-C <dir>] <expected-value> +# [<git-config-options>...] <config-key> +# +# for example to check that the value of core.bar is foo +# +# test_cmp_config foo core.bar +# +test_cmp_config() { + local GD && + if test "$1" = "-C" + then + shift && + GD="-C $1" && + shift + fi && + printf "%s\n" "$1" >expect.config && + shift && + git $GD config "$@" >actual.config && + test_cmp expect.config actual.config +} + # test_cmp_bin - helper to compare binary files test_cmp_bin() { cmp "$@" } +# Use this instead of test_cmp to compare files that contain expected and +# actual output from git commands that can be translated. When running +# under GIT_TEST_GETTEXT_POISON this pretends that the command produced expected +# results. +test_i18ncmp () { + ! test_have_prereq C_LOCALE_OUTPUT || test_cmp "$@" +} + +# Use this instead of "grep expected-string actual" to see if the +# output from a git command that can be translated either contains an +# expected string, or does not contain an unwanted one. When running +# under GIT_TEST_GETTEXT_POISON this pretends that the command produced expected +# results. +test_i18ngrep () { + eval "last_arg=\${$#}" + + test -f "$last_arg" || + BUG "test_i18ngrep requires a file to read as the last parameter" + + if test $# -lt 2 || + { test "x!" = "x$1" && test $# -lt 3 ; } + then + BUG "too few parameters to test_i18ngrep" + fi + + if test_have_prereq !C_LOCALE_OUTPUT + then + # pretend success + return 0 + fi + + if test "x!" = "x$1" + then + shift + ! grep "$@" && return 0 + + echo >&4 "error: '! grep $@' did find a match in:" + else + grep "$@" && return 0 + + echo >&4 "error: 'grep $@' didn't find a match in:" + fi + + if test -s "$last_arg" + then + cat >&4 "$last_arg" + else + echo >&4 "<File '$last_arg' is empty>" + fi + + return 1 +} + # Call any command "$@" but be more verbose about its # failure. This is handy for commands like "test" which do # not output anything when they fail. verbose () { "$@" && return 0 - echo >&2 "command failed: $(git rev-parse --sq-quote "$@")" + echo >&4 "command failed: $(git rev-parse --sq-quote "$@")" return 1 } @@ -718,6 +842,7 @@ verbose () { # otherwise. test_must_be_empty () { + test_path_is_file "$1" && if test -s "$1" then echo "'$1' is not empty, it contains:" @@ -728,9 +853,23 @@ test_must_be_empty () { # Tests that its two parameters refer to the same revision test_cmp_rev () { - git rev-parse --verify "$1" >expect.rev && - git rev-parse --verify "$2" >actual.rev && - test_cmp expect.rev actual.rev + if test $# != 2 + then + error "bug in the test script: test_cmp_rev requires two revisions, but got $#" + else + local r1 r2 + r1=$(git rev-parse --verify "$1") && + r2=$(git rev-parse --verify "$2") && + if test "$r1" != "$r2" + then + cat >&4 <<-EOF + error: two revisions point to different objects: + '$1': $r1 + '$2': $r2 + EOF + return 1 + fi + fi } # Print a sequence of integers in increasing order, either with @@ -745,7 +884,7 @@ test_seq () { case $# in 1) set 1 "$@" ;; 2) ;; - *) error "bug in the test script: not 1 or 2 parameters to test_seq" ;; + *) BUG "not 1 or 2 parameters to test_seq" ;; esac test_seq_counter__=$1 while test "$test_seq_counter__" -le "$2" @@ -783,7 +922,7 @@ test_when_finished () { # doing so on Bash is better than nothing (the test will # silently pass on other shells). test "${BASH_SUBSHELL-0}" = 0 || - error "bug in test script: test_when_finished does nothing in a subshell" + BUG "test_when_finished does nothing in a subshell" test_cleanup="{ $* } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" } @@ -792,12 +931,13 @@ test_when_finished () { # Usage: test_create_repo <directory> test_create_repo () { test "$#" = 1 || - error "bug in the test script: not 1 parameter to test-create-repo" + BUG "not 1 parameter to test-create-repo" repo="$1" mkdir -p "$repo" ( cd "$repo" || error "Cannot setup test environment" - "$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 || + "${GIT_TEST_INSTALLED:-$GIT_EXEC_PATH}/git$X" init \ + "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 || error "cannot run git init -- have you built things yet?" mv .git/hooks .git/hooks-disabled ) || exit @@ -828,8 +968,8 @@ test_write_lines () { } perl () { - command "$PERL_PATH" "$@" -} + command "$PERL_PATH" "$@" 2>&7 +} 7>&2 2>&4 # Is the value one of the various ways to spell a boolean true/false? test_normalize_bool () { @@ -969,13 +1109,13 @@ test_env () { shift ;; *) - "$@" + "$@" 2>&7 exit ;; esac done ) -} +} 7>&2 2>&4 # Returns true if the numeric exit code in "$2" represents the expected signal # in "$1". Signals should be given numerically. @@ -1017,6 +1157,109 @@ nongit () { GIT_CEILING_DIRECTORIES=$(pwd) && export GIT_CEILING_DIRECTORIES && cd non-repo && - "$@" + "$@" 2>&7 ) +} 7>&2 2>&4 + +# convert stdin to pktline representation; note that empty input becomes an +# empty packet, not a flush packet (for that you can just print 0000 yourself). +packetize() { + cat >packetize.tmp && + len=$(wc -c <packetize.tmp) && + printf '%04x%s' "$(($len + 4))" && + cat packetize.tmp && + rm -f packetize.tmp +} + +# Parse the input as a series of pktlines, writing the result to stdout. +# Sideband markers are removed automatically, and the output is routed to +# stderr if appropriate. +# +# NUL bytes are converted to "\\0" for ease of parsing with text tools. +depacketize () { + perl -e ' + while (read(STDIN, $len, 4) == 4) { + if ($len eq "0000") { + print "FLUSH\n"; + } else { + read(STDIN, $buf, hex($len) - 4); + $buf =~ s/\0/\\0/g; + if ($buf =~ s/^[\x2\x3]//) { + print STDERR $buf; + } else { + $buf =~ s/^\x1//; + print $buf; + } + } + } + ' +} + +# Set the hash algorithm in use to $1. Only useful when testing the testsuite. +test_set_hash () { + test_hash_algo="$1" +} + +# Detect the hash algorithm in use. +test_detect_hash () { + # Currently we only support SHA-1, but in the future this function will + # actually detect the algorithm in use. + test_hash_algo='sha1' +} + +# Load common hash metadata and common placeholder object IDs for use with +# test_oid. +test_oid_init () { + test -n "$test_hash_algo" || test_detect_hash && + test_oid_cache <"$TEST_DIRECTORY/oid-info/hash-info" && + test_oid_cache <"$TEST_DIRECTORY/oid-info/oid" +} + +# Load key-value pairs from stdin suitable for use with test_oid. Blank lines +# and lines starting with "#" are ignored. Keys must be shell identifier +# characters. +# +# Examples: +# rawsz sha1:20 +# rawsz sha256:32 +test_oid_cache () { + local tag rest k v && + + { test -n "$test_hash_algo" || test_detect_hash; } && + while read tag rest + do + case $tag in + \#*) + continue;; + ?*) + # non-empty + ;; + *) + # blank line + continue;; + esac && + + k="${rest%:*}" && + v="${rest#*:}" && + + if ! expr "$k" : '[a-z0-9][a-z0-9]*$' >/dev/null + then + BUG 'bad hash algorithm' + fi && + eval "test_oid_${k}_$tag=\"\$v\"" + done +} + +# Look up a per-hash value based on a key ($1). The value must have been loaded +# by test_oid_init or test_oid_cache. +test_oid () { + local var="test_oid_${test_hash_algo}_$1" && + + # If the variable is unset, we must be missing an entry for this + # key-hash pair, so exit with an error. + if eval "test -z \"\${$var+set}\"" + then + BUG "undefined key '$1'" + fi && + eval "printf '%s' \"\${$var}\"" } |