diff options
Diffstat (limited to 't/test-lib-functions.sh')
| -rw-r--r-- | t/test-lib-functions.sh | 329 |
1 files changed, 283 insertions, 46 deletions
diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index aeae3ca769..bd357704cc 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -32,6 +32,11 @@ test_set_editor () { export EDITOR } +test_set_index_version () { + GIT_INDEX_VERSION="$1" + export GIT_INDEX_VERSION +} + test_decode_color () { awk ' function name(n) { @@ -76,6 +81,10 @@ test_decode_color () { ' } +lf_to_nul () { + perl -pe 'y/\012/\000/' +} + nul_to_q () { perl -pe 'y/\000/Q/' } @@ -140,16 +149,29 @@ test_pause () { fi } -# Call test_commit with the arguments "<message> [<file> [<contents> [<tag>]]]" +# Wrap git in gdb. Adding this to a command can make it easier to +# understand what is going on in a failing test. +# +# Example: "debug git checkout master". +debug () { + GIT_TEST_GDB=1 "$@" +} + +# Call test_commit with the arguments +# [-C <directory>] <message> [<file> [<contents> [<tag>]]]" # # This will commit a file with the given contents and the given commit # message, and tag the resulting commit with the given tag name. # # <file>, <contents>, and <tag> all default to <message>. +# +# If the first argument is "-C", the second argument is used as a path for +# the git invocations. test_commit () { notick= && signoff= && + indir= && while test $# != 0 do case "$1" in @@ -159,21 +181,26 @@ test_commit () { --signoff) signoff="$1" ;; + -C) + indir="$2" + shift + ;; *) break ;; esac shift done && + indir=${indir:+"$indir"/} && file=${2:-"$1.t"} && - echo "${3-$1}" > "$file" && - git add "$file" && + echo "${3-$1}" > "$indir$file" && + git ${indir:+ -C "$indir"} add "$file" && if test -z "$notick" then test_tick fi && - git commit $signoff -m "$1" && - git tag "${4:-$1}" + git ${indir:+ -C "$indir"} commit $signoff -m "$1" && + git ${indir:+ -C "$indir"} tag "${4:-$1}" } # Call test_merge with the arguments "<message> <commit>", where <commit> @@ -196,7 +223,14 @@ test_chmod () { # Unset a configuration variable, but don't fail if it doesn't exist. test_unconfig () { - git config --unset-all "$@" + config_dir= + if test "$1" = -C + then + shift + config_dir=$1 + shift + fi + git ${config_dir:+-C "$config_dir"} config --unset-all "$@" config_status=$? case "$config_status" in 5) # ok, nothing to unset @@ -208,8 +242,15 @@ test_unconfig () { # Set git config, automatically unsetting it after the test is over. test_config () { - test_when_finished "test_unconfig '$1'" && - git config "$@" + config_dir= + if test "$1" = -C + then + shift + config_dir=$1 + shift + fi + test_when_finished "test_unconfig ${config_dir:+-C '$config_dir'} '$1'" && + git ${config_dir:+-C "$config_dir"} config "$@" } test_config_global () { @@ -343,11 +384,18 @@ test_declared_prereq () { return 1 } +test_verify_prereq () { + test -z "$test_prereq" || + expr >/dev/null "$test_prereq" : '[A-Z0-9_,!]*$' || + error "bug in the test script: '$test_prereq' does not look like a prereq" +} + test_expect_failure () { test_start_ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-failure" + test_verify_prereq export test_prereq if ! test_skip "$@" then @@ -367,6 +415,7 @@ test_expect_success () { test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-success" + test_verify_prereq export test_prereq if ! test_skip "$@" then @@ -395,6 +444,7 @@ test_external () { error >&5 "bug in the test script: not 3 or 4 parameters to test_external" descr="$1" shift + test_verify_prereq export test_prereq if ! test_skip "$descr" "$@" then @@ -408,7 +458,7 @@ test_external () { # test_run_, but keep its stdout on our stdout even in # non-verbose mode. "$@" 2>&4 - if [ "$?" = 0 ] + if test "$?" = 0 then if test $test_external_has_tap -eq 0; then test_ok_ "$descr" @@ -435,11 +485,12 @@ test_external_without_stderr () { tmp=${TMPDIR:-/tmp} stderr="$tmp/git-external-stderr.$$.tmp" test_external "$@" 4> "$stderr" - [ -f "$stderr" ] || error "Internal error: $stderr disappeared." + test -f "$stderr" || error "Internal error: $stderr disappeared." descr="no stderr: $1" shift say >&3 "# expecting no stderr from previous command" - if [ ! -s "$stderr" ]; then + if test ! -s "$stderr" + then rm "$stderr" if test $test_external_has_tap -eq 0; then @@ -449,8 +500,9 @@ test_external_without_stderr () { test_success=$(($test_success + 1)) fi else - if [ "$verbose" = t ]; then - output=`echo; echo "# Stderr is:"; cat "$stderr"` + if test "$verbose" = t + then + output=$(echo; echo "# Stderr is:"; cat "$stderr") else output= fi @@ -469,27 +521,39 @@ test_external_without_stderr () { # The commands test the existence or non-existence of $1. $2 can be # given to provide a more precise diagnosis. test_path_is_file () { - if ! [ -f "$1" ] + if ! test -f "$1" then - echo "File $1 doesn't exist. $*" + echo "File $1 doesn't exist. $2" false fi } test_path_is_dir () { - if ! [ -d "$1" ] + if ! test -d "$1" then - echo "Directory $1 doesn't exist. $*" + echo "Directory $1 doesn't exist. $2" false fi } +# Check if the directory exists and is empty as expected, barf otherwise. +test_dir_is_empty () { + test_path_is_dir "$1" && + if test -n "$(ls -a1 "$1" | egrep -v '^\.\.?$')" + then + echo "Directory '$1' is not empty, it contains:" + ls -la "$1" + return 1 + fi +} + test_path_is_missing () { - if [ -e "$1" ] + if test -e "$1" then echo "Path exists:" ls -ld "$1" - if [ $# -ge 1 ]; then + if test $# -ge 1 + then echo "$*" fi false @@ -519,6 +583,21 @@ test_line_count () { fi } +# Returns success if a comma separated string of keywords ($1) contains a +# given keyword ($2). +# Examples: +# `list_contains "foo,bar" bar` returns 0 +# `list_contains "foo" bar` returns 1 + +list_contains () { + case ",$1," in + *,$2,*) + return 0 + ;; + esac + return 1 +} + # This is not among top-level (test_expect_success | test_expect_failure) # but is a prefix that can be used in the test script, like: # @@ -532,18 +611,34 @@ test_line_count () { # the failure could be due to a segv. We want a controlled failure. test_must_fail () { + case "$1" in + ok=*) + _test_ok=${1#ok=} + shift + ;; + *) + _test_ok= + ;; + esac "$@" exit_code=$? - if test $exit_code = 0; then + if test $exit_code -eq 0 && ! list_contains "$_test_ok" success + then echo >&2 "test_must_fail: command succeeded: $*" return 1 - elif test $exit_code -gt 129 -a $exit_code -le 192; then - echo >&2 "test_must_fail: died by signal: $*" + elif test_match_signal 13 $exit_code && list_contains "$_test_ok" sigpipe + then + return 0 + elif test $exit_code -gt 129 && test $exit_code -le 192 + then + echo >&2 "test_must_fail: died by signal $(($exit_code - 128)): $*" return 1 - elif test $exit_code = 127; then + elif test $exit_code -eq 127 + then echo >&2 "test_must_fail: command not found: $*" return 1 - elif test $exit_code = 126; then + elif test $exit_code -eq 126 + then echo >&2 "test_must_fail: valgrind error: $*" return 1 fi @@ -562,16 +657,7 @@ test_must_fail () { # because we want to notice if it fails due to segv. test_might_fail () { - "$@" - exit_code=$? - if test $exit_code -gt 129 -a $exit_code -le 192; then - echo >&2 "test_might_fail: died by signal: $*" - return 1 - elif test $exit_code = 127; then - echo >&2 "test_might_fail: command not found: $*" - return 1 - fi - return 0 + test_must_fail ok=success "$@" } # Similar to test_must_fail and test_might_fail, but check that a @@ -612,6 +698,21 @@ test_cmp() { $GIT_TEST_CMP "$@" } +# test_cmp_bin - helper to compare binary files + +test_cmp_bin() { + cmp "$@" +} + +# Call any command "$@" but be more verbose about its +# failure. This is handy for commands like "test" which do +# not output anything when they fail. +verbose () { + "$@" && return 0 + echo >&2 "command failed: $(git rev-parse --sq-quote "$@")" + return 1 +} + # Check if the file expected to be empty is indeed empty, and barfs # otherwise. @@ -631,17 +732,13 @@ test_cmp_rev () { test_cmp expect.rev actual.rev } -# Print a sequence of numbers or letters in increasing order. This is -# similar to GNU seq(1), but the latter might not be available -# everywhere (and does not do letters). It may be used like: +# Print a sequence of integers in increasing order, either with +# two arguments (start and end): +# +# test_seq 1 5 -- outputs 1 2 3 4 5 one line at a time # -# for i in `test_seq 100`; do -# for j in `test_seq 10 20`; do -# for k in `test_seq a z`; do -# echo $i-$j-$k -# done -# done -# done +# or with one argument (end), in which case it starts counting +# from 1. test_seq () { case $# in @@ -649,7 +746,12 @@ test_seq () { 2) ;; *) error "bug in the test script: not 1 or 2 parameters to test_seq" ;; esac - perl -le 'print for $ARGV[0]..$ARGV[1]' -- "$@" + test_seq_counter__=$1 + while test "$test_seq_counter__" -le "$2" + do + echo "$test_seq_counter__" + test_seq_counter__=$(( $test_seq_counter__ + 1 )) + done } # This function can be used to schedule some commands to be run @@ -676,6 +778,11 @@ test_seq () { # what went wrong. test_when_finished () { + # We cannot detect when we are in a subshell in general, but by + # doing so on Bash is better than nothing (the test will + # silently pass on other shells). + test "${BASH_SUBSHELL-0}" = 0 || + error "bug in test script: test_when_finished does nothing in a subshell" test_cleanup="{ $* } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" } @@ -708,14 +815,79 @@ test_ln_s_add () { else printf '%s' "$1" >"$2" && ln_s_obj=$(git hash-object -w "$2") && - git update-index --add --cacheinfo 120000 $ln_s_obj "$2" + git update-index --add --cacheinfo 120000 $ln_s_obj "$2" && + # pick up stat info from the file + git update-index "$2" fi } +# This function writes out its parameters, one per line +test_write_lines () { + printf "%s\n" "$@" +} + perl () { command "$PERL_PATH" "$@" } +# Is the value one of the various ways to spell a boolean true/false? +test_normalize_bool () { + git -c magic.variable="$1" config --bool magic.variable 2>/dev/null +} + +# Given a variable $1, normalize the value of it to one of "true", +# "false", or "auto" and store the result to it. +# +# test_tristate GIT_TEST_HTTPD +# +# A variable set to an empty string is set to 'false'. +# A variable set to 'false' or 'auto' keeps its value. +# Anything else is set to 'true'. +# An unset variable defaults to 'auto'. +# +# The last rule is to allow people to set the variable to an empty +# string and export it to decline testing the particular feature +# for versions both before and after this change. We used to treat +# both unset and empty variable as a signal for "do not test" and +# took any non-empty string as "please test". + +test_tristate () { + if eval "test x\"\${$1+isset}\" = xisset" + then + # explicitly set + eval " + case \"\$$1\" in + '') $1=false ;; + auto) ;; + *) $1=\$(test_normalize_bool \$$1 || echo true) ;; + esac + " + else + eval "$1=auto" + fi +} + +# Exit the test suite, either by skipping all remaining tests or by +# exiting with an error. If "$1" is "auto", we then we assume we were +# opportunistically trying to set up some tests and we skip. If it is +# "true", then we report a failure. +# +# The error/skip message should be given by $2. +# +test_skip_or_die () { + case "$1" in + auto) + skip_all=$2 + test_done + ;; + true) + error "$2" + ;; + *) + error "BUG: test tristate is '$1' (real error: $2)" + esac +} + # The following mingw_* functions obey POSIX shell syntax, but are actually # bash scripts, and are meant to be used only with bash on Windows. @@ -781,3 +953,68 @@ mingw_read_file_strip_cr_ () { eval "$1=\$$1\$line" done } + +# Like "env FOO=BAR some-program", but run inside a subshell, which means +# it also works for shell functions (though those functions cannot impact +# the environment outside of the test_env invocation). +test_env () { + ( + while test $# -gt 0 + do + case "$1" in + *=*) + eval "${1%%=*}=\${1#*=}" + eval "export ${1%%=*}" + shift + ;; + *) + "$@" + exit + ;; + esac + done + ) +} + +# Returns true if the numeric exit code in "$2" represents the expected signal +# in "$1". Signals should be given numerically. +test_match_signal () { + if test "$2" = "$((128 + $1))" + then + # POSIX + return 0 + elif test "$2" = "$((256 + $1))" + then + # ksh + return 0 + fi + return 1 +} + +# Read up to "$1" bytes (or to EOF) from stdin and write them to stdout. +test_copy_bytes () { + perl -e ' + my $len = $ARGV[1]; + while ($len > 0) { + my $s; + my $nread = sysread(STDIN, $s, $len); + die "cannot read: $!" unless defined($nread); + print $s; + $len -= $nread; + } + ' - "$1" +} + +# run "$@" inside a non-git directory +nongit () { + test -d non-repo || + mkdir non-repo || + return 1 + + ( + GIT_CEILING_DIRECTORIES=$(pwd) && + export GIT_CEILING_DIRECTORIES && + cd non-repo && + "$@" + ) +} |