diff options
Diffstat (limited to 't/t9809-git-p4-client-view.sh')
| -rwxr-xr-x | t/t9809-git-p4-client-view.sh | 427 |
1 files changed, 427 insertions, 0 deletions
diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh new file mode 100755 index 0000000000..b0c6d4391d --- /dev/null +++ b/t/t9809-git-p4-client-view.sh @@ -0,0 +1,427 @@ +#!/bin/sh + +test_description='git-p4 client view' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +# +# Construct a client with this list of View lines +# +client_view() { + ( + cat <<-EOF && + Client: client + Description: client + Root: $cli + View: + EOF + for arg ; do + printf "\t$arg\n" + done + ) | p4 client -i +} + +# +# Verify these files exist, exactly. Caller creates +# a list of files in file "files". +# +check_files_exist() { + ok=0 && + num=$# && + for arg ; do + test_path_is_file "$arg" && + ok=$(($ok + 1)) + done && + test $ok -eq $num && + test_line_count = $num files +} + +# +# Sync up the p4 client, make sure the given files (and only +# those) exist. +# +client_verify() { + ( + cd "$cli" && + p4 sync && + find . -type f ! -name files >files && + check_files_exist "$@" + ) +} + +# +# Make sure the named files, exactly, exist. +# +git_verify() { + ( + cd "$git" && + git ls-files >files && + check_files_exist "$@" + ) +} + +# //depot +# - dir1 +# - file11 +# - file12 +# - dir2 +# - file21 +# - file22 +init_depot() { + for d in 1 2 ; do + mkdir -p dir$d && + for f in 1 2 ; do + echo dir$d/file$d$f >dir$d/file$d$f && + p4 add dir$d/file$d$f && + p4 submit -d "dir$d/file$d$f" + done + done && + find . -type f ! -name files >files && + check_files_exist dir1/file11 dir1/file12 \ + dir2/file21 dir2/file22 +} + +test_expect_success 'init depot' ' + ( + cd "$cli" && + init_depot + ) +' + +# double % for printf +test_expect_success 'unsupported view wildcard %%n' ' + client_view "//depot/%%%%1/sub/... //client/sub/%%%%1/..." && + test_when_finished cleanup_git && + test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot +' + +test_expect_success 'unsupported view wildcard *' ' + client_view "//depot/*/bar/... //client/*/bar/..." && + test_when_finished cleanup_git && + test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot +' + +test_expect_success 'wildcard ... only supported at end of spec' ' + client_view "//depot/.../file11 //client/.../file11" && + test_when_finished cleanup_git && + test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot +' + +test_expect_success 'basic map' ' + client_view "//depot/dir1/... //client/cli1/..." && + files="cli1/file11 cli1/file12" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'client view with no mappings' ' + client_view && + client_verify && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify +' + +test_expect_success 'single file map' ' + client_view "//depot/dir1/file11 //client/file11" && + files="file11" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'later mapping takes precedence (entire repo)' ' + client_view "//depot/dir1/... //client/cli1/..." \ + "//depot/... //client/cli2/..." && + files="cli2/dir1/file11 cli2/dir1/file12 + cli2/dir2/file21 cli2/dir2/file22" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'later mapping takes precedence (partial repo)' ' + client_view "//depot/dir1/... //client/..." \ + "//depot/dir2/... //client/..." && + files="file21 file22" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +# Reading the view backwards, +# dir2 goes to cli12 +# dir1 cannot go to cli12 since it was filled by dir2 +# dir1 also does not go to cli3, since the second rule +# noticed that it matched, but was already filled +test_expect_success 'depot path matching rejected client path' ' + client_view "//depot/dir1/... //client/cli3/..." \ + "//depot/dir1/... //client/cli12/..." \ + "//depot/dir2/... //client/cli12/..." && + files="cli12/file21 cli12/file22" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +# since both have the same //client/..., the exclusion +# rule keeps everything out +test_expect_success 'exclusion wildcard, client rhs same (odd)' ' + client_view "//depot/... //client/..." \ + "-//depot/dir2/... //client/..." && + client_verify && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify +' + +test_expect_success 'exclusion wildcard, client rhs different (normal)' ' + client_view "//depot/... //client/..." \ + "-//depot/dir2/... //client/dir2/..." && + files="dir1/file11 dir1/file12" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'exclusion single file' ' + client_view "//depot/... //client/..." \ + "-//depot/dir2/file22 //client/file22" && + files="dir1/file11 dir1/file12 dir2/file21" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay wildcard' ' + client_view "//depot/dir1/... //client/cli/..." \ + "+//depot/dir2/... //client/cli/...\n" && + files="cli/file11 cli/file12 cli/file21 cli/file22" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay single file' ' + client_view "//depot/dir1/... //client/cli/..." \ + "+//depot/dir2/file21 //client/cli/file21" && + files="cli/file11 cli/file12 cli/file21" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'exclusion with later inclusion' ' + client_view "//depot/... //client/..." \ + "-//depot/dir2/... //client/dir2/..." \ + "//depot/dir2/... //client/dir2incl/..." && + files="dir1/file11 dir1/file12 dir2incl/file21 dir2incl/file22" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'quotes on rhs only' ' + client_view "//depot/dir1/... \"//client/cdir 1/...\"" && + client_verify "cdir 1/file11" "cdir 1/file12" && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify "cdir 1/file11" "cdir 1/file12" +' + +# +# Submit tests +# + +# clone sets variable +test_expect_success 'clone --use-client-spec sets useClientSpec' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + ( + cd "$git" && + git config --bool git-p4.useClientSpec >actual && + echo true >true && + test_cmp actual true + ) +' + +# clone just a subdir of the client spec +test_expect_success 'subdir clone' ' + client_view "//depot/... //client/..." && + files="dir1/file11 dir1/file12 dir2/file21 dir2/file22" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + git_verify dir1/file11 dir1/file12 +' + +# +# submit back, see what happens: five cases +# +test_expect_success 'subdir clone, submit modify' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + echo line >>dir1/file12 && + git add dir1/file12 && + git commit -m dir1/file12 && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file12 && + test_line_count = 2 dir1/file12 + ) +' + +test_expect_success 'subdir clone, submit add' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + echo file13 >dir1/file13 && + git add dir1/file13 && + git commit -m dir1/file13 && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file13 + ) +' + +test_expect_success 'subdir clone, submit delete' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git rm dir1/file12 && + git commit -m "delete dir1/file12" && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_missing dir1/file12 + ) +' + +test_expect_success 'subdir clone, submit copy' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.detectCopies true && + cp dir1/file11 dir1/file11a && + git add dir1/file11a && + git commit -m "copy to dir1/file11a" && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file11a + ) +' + +test_expect_success 'subdir clone, submit rename' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.detectRenames true && + git mv dir1/file13 dir1/file13a && + git commit -m "rename dir1/file13 to dir1/file13a" && + "$GITP4" submit + ) && + ( + cd "$cli" && + test_path_is_missing dir1/file13 && + test_path_is_file dir1/file13a + ) +' + +test_expect_success 'reinit depot' ' + ( + cd "$cli" && + p4 sync -f && + rm files && + p4 delete */* && + p4 submit -d "delete all files" && + init_depot + ) +' + +# +# Rename directories to test quoting in depot-side mappings +# //depot +# - "dir 1" +# - file11 +# - file12 +# - "dir 2" +# - file21 +# - file22 +# +test_expect_success 'rename files to introduce spaces' ' + client_view "//depot/... //client/..." && + client_verify dir1/file11 dir1/file12 \ + dir2/file21 dir2/file22 && + ( + cd "$cli" && + p4 open dir1/... && + p4 move dir1/... "dir 1"/... && + p4 open dir2/... && + p4 move dir2/... "dir 2"/... && + p4 submit -d "rename with spaces" + ) && + client_verify "dir 1/file11" "dir 1/file12" \ + "dir 2/file21" "dir 2/file22" +' + +test_expect_success 'quotes on lhs only' ' + client_view "\"//depot/dir 1/...\" //client/cdir1/..." && + files="cdir1/file11 cdir1/file12" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + client_verify $files +' + +test_expect_success 'quotes on both sides' ' + client_view "\"//depot/dir 1/...\" \"//client/cdir 1/...\"" && + client_verify "cdir 1/file11" "cdir 1/file12" && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify "cdir 1/file11" "cdir 1/file12" +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done |