diff options
Diffstat (limited to 't/t9809-git-p4-client-view.sh')
| -rwxr-xr-x | t/t9809-git-p4-client-view.sh | 843 |
1 files changed, 843 insertions, 0 deletions
diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh new file mode 100755 index 0000000000..77f63492d9 --- /dev/null +++ b/t/t9809-git-p4-client-view.sh @@ -0,0 +1,843 @@ +#!/bin/sh + +test_description='git p4 client view' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +# +# Verify these files exist, exactly. Caller creates +# a list of files in file "files". +# +check_files_exist() { + ok=0 && + num=$# && + for arg ; do + test_path_is_file "$arg" && + ok=$(($ok + 1)) + done && + test $ok -eq $num && + test_line_count = $num files +} + +# +# Sync up the p4 client, make sure the given files (and only +# those) exist. +# +client_verify() { + ( + cd "$cli" && + p4 sync && + find . -type f ! -name files >files && + check_files_exist "$@" + ) +} + +# +# Make sure the named files, exactly, exist. +# +git_verify() { + ( + cd "$git" && + git ls-files >files && + check_files_exist "$@" + ) +} + +# //depot +# - dir1 +# - file11 +# - file12 +# - dir2 +# - file21 +# - file22 +init_depot() { + for d in 1 2 ; do + mkdir -p dir$d && + for f in 1 2 ; do + echo dir$d/file$d$f >dir$d/file$d$f && + p4 add dir$d/file$d$f && + p4 submit -d "dir$d/file$d$f" + done + done && + find . -type f ! -name files >files && + check_files_exist dir1/file11 dir1/file12 \ + dir2/file21 dir2/file22 +} + +test_expect_success 'init depot' ' + ( + cd "$cli" && + init_depot + ) +' + +# double % for printf +test_expect_success 'unsupported view wildcard %%n' ' + client_view "//depot/%%%%1/sub/... //client/sub/%%%%1/..." && + test_when_finished cleanup_git && + test_must_fail git p4 clone --use-client-spec --dest="$git" //depot +' + +test_expect_success 'unsupported view wildcard *' ' + client_view "//depot/*/bar/... //client/*/bar/..." && + test_when_finished cleanup_git && + test_must_fail git p4 clone --use-client-spec --dest="$git" //depot +' + +test_expect_success 'wildcard ... only supported at end of spec 1' ' + client_view "//depot/.../file11 //client/.../file11" && + test_when_finished cleanup_git && + test_must_fail git p4 clone --use-client-spec --dest="$git" //depot +' + +test_expect_success 'wildcard ... only supported at end of spec 2' ' + client_view "//depot/.../a/... //client/.../a/..." && + test_when_finished cleanup_git && + test_must_fail git p4 clone --use-client-spec --dest="$git" //depot +' + +test_expect_success 'basic map' ' + client_view "//depot/dir1/... //client/cli1/..." && + files="cli1/file11 cli1/file12" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'client view with no mappings' ' + client_view && + client_verify && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify +' + +test_expect_success 'single file map' ' + client_view "//depot/dir1/file11 //client/file11" && + files="file11" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'later mapping takes precedence (entire repo)' ' + client_view "//depot/dir1/... //client/cli1/..." \ + "//depot/... //client/cli2/..." && + files="cli2/dir1/file11 cli2/dir1/file12 + cli2/dir2/file21 cli2/dir2/file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'later mapping takes precedence (partial repo)' ' + client_view "//depot/dir1/... //client/..." \ + "//depot/dir2/... //client/..." && + files="file21 file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +# Reading the view backwards, +# dir2 goes to cli12 +# dir1 cannot go to cli12 since it was filled by dir2 +# dir1 also does not go to cli3, since the second rule +# noticed that it matched, but was already filled +test_expect_success 'depot path matching rejected client path' ' + client_view "//depot/dir1/... //client/cli3/..." \ + "//depot/dir1/... //client/cli12/..." \ + "//depot/dir2/... //client/cli12/..." && + files="cli12/file21 cli12/file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +# since both have the same //client/..., the exclusion +# rule keeps everything out +test_expect_success 'exclusion wildcard, client rhs same (odd)' ' + client_view "//depot/... //client/..." \ + "-//depot/dir2/... //client/..." && + client_verify && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify +' + +test_expect_success 'exclusion wildcard, client rhs different (normal)' ' + client_view "//depot/... //client/..." \ + "-//depot/dir2/... //client/dir2/..." && + files="dir1/file11 dir1/file12" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'exclusion single file' ' + client_view "//depot/... //client/..." \ + "-//depot/dir2/file22 //client/file22" && + files="dir1/file11 dir1/file12 dir2/file21" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay wildcard' ' + client_view "//depot/dir1/... //client/cli/..." \ + "+//depot/dir2/... //client/cli/..." && + files="cli/file11 cli/file12 cli/file21 cli/file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay single file' ' + client_view "//depot/dir1/... //client/cli/..." \ + "+//depot/dir2/file21 //client/cli/file21" && + files="cli/file11 cli/file12 cli/file21" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'exclusion with later inclusion' ' + client_view "//depot/... //client/..." \ + "-//depot/dir2/... //client/dir2/..." \ + "//depot/dir2/... //client/dir2incl/..." && + files="dir1/file11 dir1/file12 dir2incl/file21 dir2incl/file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'quotes on rhs only' ' + client_view "//depot/dir1/... \"//client/cdir 1/...\"" && + client_verify "cdir 1/file11" "cdir 1/file12" && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify "cdir 1/file11" "cdir 1/file12" +' + +# +# Submit tests +# + +# clone sets variable +test_expect_success 'clone --use-client-spec sets useClientSpec' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + ( + cd "$git" && + git config --bool git-p4.useClientSpec >actual && + echo true >true && + test_cmp actual true + ) +' + +# clone just a subdir of the client spec +test_expect_success 'subdir clone' ' + client_view "//depot/... //client/..." && + files="dir1/file11 dir1/file12 dir2/file21 dir2/file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + git_verify dir1/file11 dir1/file12 +' + +# +# submit back, see what happens: five cases +# +test_expect_success 'subdir clone, submit modify' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + echo line >>dir1/file12 && + git add dir1/file12 && + git commit -m dir1/file12 && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file12 && + test_line_count = 2 dir1/file12 + ) +' + +test_expect_success 'subdir clone, submit add' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + echo file13 >dir1/file13 && + git add dir1/file13 && + git commit -m dir1/file13 && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file13 + ) +' + +test_expect_success 'subdir clone, submit delete' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git rm dir1/file12 && + git commit -m "delete dir1/file12" && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_missing dir1/file12 + ) +' + +test_expect_success 'subdir clone, submit copy' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.detectCopies true && + cp dir1/file11 dir1/file11a && + git add dir1/file11a && + git commit -m "copy to dir1/file11a" && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file11a && + ! is_cli_file_writeable dir1/file11a + ) +' + +test_expect_success 'subdir clone, submit rename' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.detectRenames true && + git mv dir1/file13 dir1/file13a && + git commit -m "rename dir1/file13 to dir1/file13a" && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_missing dir1/file13 && + test_path_is_file dir1/file13a && + ! is_cli_file_writeable dir1/file13a + ) +' + +# see t9800 for the non-client-spec case, and the rest of the wildcard tests +test_expect_success 'wildcard files submit back to p4, client-spec case' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + echo git-wild-hash >dir1/git-wild#hash && + if test_have_prereq NOT_MINGW NOT_CYGWIN + then + echo git-wild-star >dir1/git-wild\*star + fi && + echo git-wild-at >dir1/git-wild@at && + echo git-wild-percent >dir1/git-wild%percent && + git add dir1/git-wild* && + git commit -m "add some wildcard filenames" && + git config git-p4.skipSubmitEditCheck true && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/git-wild#hash && + if test_have_prereq NOT_MINGW NOT_CYGWIN + then + test_path_is_file dir1/git-wild\*star + fi && + test_path_is_file dir1/git-wild@at && + test_path_is_file dir1/git-wild%percent + ) && + ( + # delete these carefully, cannot just do "p4 delete" + # on files with wildcards; but git-p4 knows how + cd "$git" && + git rm dir1/git-wild* && + git commit -m "clean up the wildcards" && + git p4 submit + ) +' + +test_expect_success 'reinit depot' ' + ( + cd "$cli" && + rm files && + p4 delete */* && + p4 submit -d "delete all files" && + init_depot + ) +' + +# +# What happens when two files of the same name are overlayed together? +# The last-listed file should take preference. +# +# //depot +# - dir1 +# - file11 +# - file12 +# - filecollide +# - dir2 +# - file21 +# - file22 +# - filecollide +# +test_expect_success 'overlay collision setup' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/filecollide >dir1/filecollide && + p4 add dir1/filecollide && + p4 submit -d dir1/filecollide && + echo dir2/filecollide >dir2/filecollide && + p4 add dir2/filecollide && + p4 submit -d dir2/filecollide + ) +' + +test_expect_success 'overlay collision 1 to 2' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 filecollide" && + echo dir2/filecollide >actual && + client_verify $files && + test_cmp actual "$cli"/filecollide && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/filecollide +' + +test_expect_failure 'overlay collision 2 to 1' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 filecollide" && + echo dir1/filecollide >actual && + client_verify $files && + test_cmp actual "$cli"/filecollide && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/filecollide +' + +test_expect_success 'overlay collision delete 2' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir2/filecollide && + p4 submit -d "remove dir2/filecollide" + ) +' + +# no filecollide, got deleted with dir2 +test_expect_failure 'overlay collision 1 to 2, but 2 deleted' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay collision update 1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + p4 open dir1/filecollide && + echo dir1/filecollide update >dir1/filecollide && + p4 submit -d "update dir1/filecollide" + ) +' + +# still no filecollide, dir2 still wins with the deletion even though the +# change to dir1 is more recent +test_expect_failure 'overlay collision 1 to 2, but 2 deleted, then 1 updated' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay collision delete filecollides' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir1/filecollide dir2/filecollide && + p4 submit -d "remove filecollides" + ) +' + +# +# Overlays as part of sync, rather than initial checkout: +# 1. add a file in dir1 +# 2. sync to include it +# 3. add same file in dir2 +# 4. sync, make sure content switches as dir2 has priority +# 5. add another file in dir1 +# 6. sync +# 7. add/delete same file in dir2 +# 8. sync, make sure it disappears, again dir2 wins +# 9. cleanup +# +# //depot +# - dir1 +# - file11 +# - file12 +# - colA +# - colB +# - dir2 +# - file21 +# - file22 +# - colA +# - colB +# +test_expect_success 'overlay sync: add colA in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colA >dir1/colA && + p4 add dir1/colA && + p4 submit -d dir1/colA + ) +' + +test_expect_success 'overlay sync: initial git checkout' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir1/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync: add colA in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colA >dir2/colA && + p4 add dir2/colA && + p4 submit -d dir2/colA + ) +' + +test_expect_success 'overlay sync: colA content switch' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir2/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync: add colB in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colB >dir1/colB && + p4 add dir1/colB && + p4 submit -d dir1/colB + ) +' + +test_expect_success 'overlay sync: colB appears' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA colB" && + echo dir1/colB >actual && + client_verify $files && + test_cmp actual "$cli"/colB && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colB +' + +test_expect_success 'overlay sync: add/delete colB in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colB >dir2/colB && + p4 add dir2/colB && + p4 submit -d dir2/colB && + p4 delete dir2/colB && + p4 submit -d "delete dir2/colB" + ) +' + +test_expect_success 'overlay sync: colB disappears' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA" && + client_verify $files && + test_when_finished cleanup_git && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files +' + +test_expect_success 'overlay sync: cleanup' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir1/colA dir2/colA dir1/colB && + p4 submit -d "remove overlay sync files" + ) +' + +# +# Overlay tests again, but swapped so dir1 has priority. +# 1. add a file in dir1 +# 2. sync to include it +# 3. add same file in dir2 +# 4. sync, make sure content does not switch +# 5. add another file in dir1 +# 6. sync +# 7. add/delete same file in dir2 +# 8. sync, make sure it is still there +# 9. cleanup +# +# //depot +# - dir1 +# - file11 +# - file12 +# - colA +# - colB +# - dir2 +# - file21 +# - file22 +# - colA +# - colB +# +test_expect_success 'overlay sync swap: add colA in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colA >dir1/colA && + p4 add dir1/colA && + p4 submit -d dir1/colA + ) +' + +test_expect_success 'overlay sync swap: initial git checkout' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir1/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync swap: add colA in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colA >dir2/colA && + p4 add dir2/colA && + p4 submit -d dir2/colA + ) +' + +test_expect_failure 'overlay sync swap: colA no content switch' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir1/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync swap: add colB in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colB >dir1/colB && + p4 add dir1/colB && + p4 submit -d dir1/colB + ) +' + +test_expect_success 'overlay sync swap: colB appears' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA colB" && + echo dir1/colB >actual && + client_verify $files && + test_cmp actual "$cli"/colB && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colB +' + +test_expect_success 'overlay sync swap: add/delete colB in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colB >dir2/colB && + p4 add dir2/colB && + p4 submit -d dir2/colB && + p4 delete dir2/colB && + p4 submit -d "delete dir2/colB" + ) +' + +test_expect_failure 'overlay sync swap: colB no change' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA colB" && + echo dir1/colB >actual && + client_verify $files && + test_cmp actual "$cli"/colB && + test_when_finished cleanup_git && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$cli"/colB +' + +test_expect_success 'overlay sync swap: cleanup' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir1/colA dir2/colA dir1/colB && + p4 submit -d "remove overlay sync files" + ) +' + +# +# Rename directories to test quoting in depot-side mappings +# //depot +# - "dir 1" +# - file11 +# - file12 +# - "dir 2" +# - file21 +# - file22 +# +test_expect_success 'rename files to introduce spaces' ' + client_view "//depot/... //client/..." && + client_verify dir1/file11 dir1/file12 \ + dir2/file21 dir2/file22 && + ( + cd "$cli" && + p4 open dir1/... && + p4 move dir1/... "dir 1"/... && + p4 open dir2/... && + p4 move dir2/... "dir 2"/... && + p4 submit -d "rename with spaces" + ) && + client_verify "dir 1/file11" "dir 1/file12" \ + "dir 2/file21" "dir 2/file22" +' + +test_expect_success 'quotes on lhs only' ' + client_view "\"//depot/dir 1/...\" //client/cdir1/..." && + files="cdir1/file11 cdir1/file12" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + client_verify $files +' + +test_expect_success 'quotes on both sides' ' + client_view "\"//depot/dir 1/...\" \"//client/cdir 1/...\"" && + client_verify "cdir 1/file11" "cdir 1/file12" && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify "cdir 1/file11" "cdir 1/file12" +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done |