diff options
Diffstat (limited to 't/t9809-git-p4-client-view.sh')
| -rwxr-xr-x | t/t9809-git-p4-client-view.sh | 628 |
1 files changed, 596 insertions, 32 deletions
diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh index c9471d562d..7d993ef80a 100755 --- a/t/t9809-git-p4-client-view.sh +++ b/t/t9809-git-p4-client-view.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='git-p4 client view' +test_description='git p4 client view' . ./lib-git-p4.sh @@ -31,7 +31,7 @@ client_view() { # check_files_exist() { ok=0 && - num=${#@} && + num=$# && for arg ; do test_path_is_file "$arg" && ok=$(($ok + 1)) @@ -71,20 +71,24 @@ git_verify() { # - dir2 # - file21 # - file22 +init_depot() { + for d in 1 2 ; do + mkdir -p dir$d && + for f in 1 2 ; do + echo dir$d/file$d$f >dir$d/file$d$f && + p4 add dir$d/file$d$f && + p4 submit -d "dir$d/file$d$f" + done + done && + find . -type f ! -name files >files && + check_files_exist dir1/file11 dir1/file12 \ + dir2/file21 dir2/file22 +} + test_expect_success 'init depot' ' ( cd "$cli" && - for d in 1 2 ; do - mkdir -p dir$d && - for f in 1 2 ; do - echo dir$d/file$d$f >dir$d/file$d$f && - p4 add dir$d/file$d$f && - p4 submit -d "dir$d/file$d$f" - done - done && - find . -type f ! -name files >files && - check_files_exist dir1/file11 dir1/file12 \ - dir2/file21 dir2/file22 + init_depot ) ' @@ -92,19 +96,25 @@ test_expect_success 'init depot' ' test_expect_success 'unsupported view wildcard %%n' ' client_view "//depot/%%%%1/sub/... //client/sub/%%%%1/..." && test_when_finished cleanup_git && - test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot + test_must_fail git p4 clone --use-client-spec --dest="$git" //depot ' test_expect_success 'unsupported view wildcard *' ' client_view "//depot/*/bar/... //client/*/bar/..." && test_when_finished cleanup_git && - test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot + test_must_fail git p4 clone --use-client-spec --dest="$git" //depot ' -test_expect_success 'wildcard ... only supported at end of spec' ' +test_expect_success 'wildcard ... only supported at end of spec 1' ' client_view "//depot/.../file11 //client/.../file11" && test_when_finished cleanup_git && - test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot + test_must_fail git p4 clone --use-client-spec --dest="$git" //depot +' + +test_expect_success 'wildcard ... only supported at end of spec 2' ' + client_view "//depot/.../a/... //client/.../a/..." && + test_when_finished cleanup_git && + test_must_fail git p4 clone --use-client-spec --dest="$git" //depot ' test_expect_success 'basic map' ' @@ -112,7 +122,7 @@ test_expect_success 'basic map' ' files="cli1/file11 cli1/file12" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -120,7 +130,7 @@ test_expect_success 'client view with no mappings' ' client_view && client_verify && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify ' @@ -129,7 +139,7 @@ test_expect_success 'single file map' ' files="file11" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -140,7 +150,7 @@ test_expect_success 'later mapping takes precedence (entire repo)' ' cli2/dir2/file21 cli2/dir2/file22" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -150,7 +160,7 @@ test_expect_success 'later mapping takes precedence (partial repo)' ' files="file21 file22" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -166,7 +176,7 @@ test_expect_success 'depot path matching rejected client path' ' files="cli12/file21 cli12/file22" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -177,7 +187,7 @@ test_expect_success 'exclusion wildcard, client rhs same (odd)' ' "-//depot/dir2/... //client/..." && client_verify && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify ' @@ -187,7 +197,7 @@ test_expect_success 'exclusion wildcard, client rhs different (normal)' ' files="dir1/file11 dir1/file12" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -197,7 +207,7 @@ test_expect_success 'exclusion single file' ' files="dir1/file11 dir1/file12 dir2/file21" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -207,7 +217,7 @@ test_expect_success 'overlay wildcard' ' files="cli/file11 cli/file12 cli/file21 cli/file22" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -217,7 +227,7 @@ test_expect_success 'overlay single file' ' files="cli/file11 cli/file12 cli/file21" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -228,7 +238,7 @@ test_expect_success 'exclusion with later inclusion' ' files="dir1/file11 dir1/file12 dir2incl/file21 dir2incl/file22" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify $files ' @@ -236,11 +246,565 @@ test_expect_success 'quotes on rhs only' ' client_view "//depot/dir1/... \"//client/cdir 1/...\"" && client_verify "cdir 1/file11" "cdir 1/file12" && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify "cdir 1/file11" "cdir 1/file12" ' # +# Submit tests +# + +# clone sets variable +test_expect_success 'clone --use-client-spec sets useClientSpec' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + ( + cd "$git" && + git config --bool git-p4.useClientSpec >actual && + echo true >true && + test_cmp actual true + ) +' + +# clone just a subdir of the client spec +test_expect_success 'subdir clone' ' + client_view "//depot/... //client/..." && + files="dir1/file11 dir1/file12 dir2/file21 dir2/file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + git_verify dir1/file11 dir1/file12 +' + +# +# submit back, see what happens: five cases +# +test_expect_success 'subdir clone, submit modify' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + echo line >>dir1/file12 && + git add dir1/file12 && + git commit -m dir1/file12 && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file12 && + test_line_count = 2 dir1/file12 + ) +' + +test_expect_success 'subdir clone, submit add' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + echo file13 >dir1/file13 && + git add dir1/file13 && + git commit -m dir1/file13 && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file13 + ) +' + +test_expect_success 'subdir clone, submit delete' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git rm dir1/file12 && + git commit -m "delete dir1/file12" && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_missing dir1/file12 + ) +' + +test_expect_success 'subdir clone, submit copy' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.detectCopies true && + cp dir1/file11 dir1/file11a && + git add dir1/file11a && + git commit -m "copy to dir1/file11a" && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/file11a && + test ! -w dir1/file11a + ) +' + +test_expect_success 'subdir clone, submit rename' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + git config git-p4.detectRenames true && + git mv dir1/file13 dir1/file13a && + git commit -m "rename dir1/file13 to dir1/file13a" && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_missing dir1/file13 && + test_path_is_file dir1/file13a && + test ! -w dir1/file13a + ) +' + +# see t9800 for the non-client-spec case, and the rest of the wildcard tests +test_expect_success 'wildcard files submit back to p4, client-spec case' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot/dir1 && + ( + cd "$git" && + echo git-wild-hash >dir1/git-wild#hash && + echo git-wild-star >dir1/git-wild\*star && + echo git-wild-at >dir1/git-wild@at && + echo git-wild-percent >dir1/git-wild%percent && + git add dir1/git-wild* && + git commit -m "add some wildcard filenames" && + git config git-p4.skipSubmitEditCheck true && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file dir1/git-wild#hash && + test_path_is_file dir1/git-wild\*star && + test_path_is_file dir1/git-wild@at && + test_path_is_file dir1/git-wild%percent + ) && + ( + # delete these carefully, cannot just do "p4 delete" + # on files with wildcards; but git-p4 knows how + cd "$git" && + git rm dir1/git-wild* && + git commit -m "clean up the wildcards" && + git p4 submit + ) +' + +test_expect_success 'reinit depot' ' + ( + cd "$cli" && + rm files && + p4 delete */* && + p4 submit -d "delete all files" && + init_depot + ) +' + +# +# What happens when two files of the same name are overlayed together? +# The last-listed file should take preference. +# +# //depot +# - dir1 +# - file11 +# - file12 +# - filecollide +# - dir2 +# - file21 +# - file22 +# - filecollide +# +test_expect_success 'overlay collision setup' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/filecollide >dir1/filecollide && + p4 add dir1/filecollide && + p4 submit -d dir1/filecollide && + echo dir2/filecollide >dir2/filecollide && + p4 add dir2/filecollide && + p4 submit -d dir2/filecollide + ) +' + +test_expect_success 'overlay collision 1 to 2' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 filecollide" && + echo dir2/filecollide >actual && + client_verify $files && + test_cmp actual "$cli"/filecollide && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/filecollide +' + +test_expect_failure 'overlay collision 2 to 1' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 filecollide" && + echo dir1/filecollide >actual && + client_verify $files && + test_cmp actual "$cli"/filecollide && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/filecollide +' + +test_expect_success 'overlay collision delete 2' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir2/filecollide && + p4 submit -d "remove dir2/filecollide" + ) +' + +# no filecollide, got deleted with dir2 +test_expect_failure 'overlay collision 1 to 2, but 2 deleted' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay collision update 1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + p4 open dir1/filecollide && + echo dir1/filecollide update >dir1/filecollide && + p4 submit -d "update dir1/filecollide" + ) +' + +# still no filecollide, dir2 still wins with the deletion even though the +# change to dir1 is more recent +test_expect_failure 'overlay collision 1 to 2, but 2 deleted, then 1 updated' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22" && + client_verify $files && + test_when_finished cleanup_git && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay collision delete filecollides' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir1/filecollide dir2/filecollide && + p4 submit -d "remove filecollides" + ) +' + +# +# Overlays as part of sync, rather than initial checkout: +# 1. add a file in dir1 +# 2. sync to include it +# 3. add same file in dir2 +# 4. sync, make sure content switches as dir2 has priority +# 5. add another file in dir1 +# 6. sync +# 7. add/delete same file in dir2 +# 8. sync, make sure it disappears, again dir2 wins +# 9. cleanup +# +# //depot +# - dir1 +# - file11 +# - file12 +# - colA +# - colB +# - dir2 +# - file21 +# - file22 +# - colA +# - colB +# +test_expect_success 'overlay sync: add colA in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colA >dir1/colA && + p4 add dir1/colA && + p4 submit -d dir1/colA + ) +' + +test_expect_success 'overlay sync: initial git checkout' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir1/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync: add colA in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colA >dir2/colA && + p4 add dir2/colA && + p4 submit -d dir2/colA + ) +' + +test_expect_success 'overlay sync: colA content switch' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir2/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync: add colB in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colB >dir1/colB && + p4 add dir1/colB && + p4 submit -d dir1/colB + ) +' + +test_expect_success 'overlay sync: colB appears' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA colB" && + echo dir1/colB >actual && + client_verify $files && + test_cmp actual "$cli"/colB && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colB +' + +test_expect_success 'overlay sync: add/delete colB in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colB >dir2/colB && + p4 add dir2/colB && + p4 submit -d dir2/colB && + p4 delete dir2/colB && + p4 submit -d "delete dir2/colB" + ) +' + +test_expect_success 'overlay sync: colB disappears' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA" && + client_verify $files && + test_when_finished cleanup_git && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files +' + +test_expect_success 'overlay sync: cleanup' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir1/colA dir2/colA dir1/colB && + p4 submit -d "remove overlay sync files" + ) +' + +# +# Overlay tests again, but swapped so dir1 has priority. +# 1. add a file in dir1 +# 2. sync to include it +# 3. add same file in dir2 +# 4. sync, make sure content does not switch +# 5. add another file in dir1 +# 6. sync +# 7. add/delete same file in dir2 +# 8. sync, make sure it is still there +# 9. cleanup +# +# //depot +# - dir1 +# - file11 +# - file12 +# - colA +# - colB +# - dir2 +# - file21 +# - file22 +# - colA +# - colB +# +test_expect_success 'overlay sync swap: add colA in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colA >dir1/colA && + p4 add dir1/colA && + p4 submit -d dir1/colA + ) +' + +test_expect_success 'overlay sync swap: initial git checkout' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir1/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + git p4 clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync swap: add colA in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colA >dir2/colA && + p4 add dir2/colA && + p4 submit -d dir2/colA + ) +' + +test_expect_failure 'overlay sync swap: colA no content switch' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir1/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync swap: add colB in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colB >dir1/colB && + p4 add dir1/colB && + p4 submit -d dir1/colB + ) +' + +test_expect_success 'overlay sync swap: colB appears' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA colB" && + echo dir1/colB >actual && + client_verify $files && + test_cmp actual "$cli"/colB && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colB +' + +test_expect_success 'overlay sync swap: add/delete colB in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colB >dir2/colB && + p4 add dir2/colB && + p4 submit -d dir2/colB && + p4 delete dir2/colB && + p4 submit -d "delete dir2/colB" + ) +' + +test_expect_failure 'overlay sync swap: colB no change' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA colB" && + echo dir1/colB >actual && + client_verify $files && + test_cmp actual "$cli"/colB && + test_when_finished cleanup_git && + ( + cd "$git" && + git p4 sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$cli"/colB +' + +test_expect_success 'overlay sync swap: cleanup' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir1/colA dir2/colA dir1/colB && + p4 submit -d "remove overlay sync files" + ) +' + +# # Rename directories to test quoting in depot-side mappings # //depot # - "dir 1" @@ -271,7 +835,7 @@ test_expect_success 'quotes on lhs only' ' files="cdir1/file11 cdir1/file12" && client_verify $files && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && client_verify $files ' @@ -279,7 +843,7 @@ test_expect_success 'quotes on both sides' ' client_view "\"//depot/dir 1/...\" \"//client/cdir 1/...\"" && client_verify "cdir 1/file11" "cdir 1/file12" && test_when_finished cleanup_git && - "$GITP4" clone --use-client-spec --dest="$git" //depot && + git p4 clone --use-client-spec --dest="$git" //depot && git_verify "cdir 1/file11" "cdir 1/file12" ' |