summaryrefslogtreecommitdiff
path: root/t/t9809-git-p4-client-view.sh
diff options
context:
space:
mode:
Diffstat (limited to 't/t9809-git-p4-client-view.sh')
-rwxr-xr-xt/t9809-git-p4-client-view.sh514
1 files changed, 462 insertions, 52 deletions
diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh
index b0c6d4391d..281be29174 100755
--- a/t/t9809-git-p4-client-view.sh
+++ b/t/t9809-git-p4-client-view.sh
@@ -1,6 +1,6 @@
#!/bin/sh
-test_description='git-p4 client view'
+test_description='git p4 client view'
. ./lib-git-p4.sh
@@ -9,23 +9,6 @@ test_expect_success 'start p4d' '
'
#
-# Construct a client with this list of View lines
-#
-client_view() {
- (
- cat <<-EOF &&
- Client: client
- Description: client
- Root: $cli
- View:
- EOF
- for arg ; do
- printf "\t$arg\n"
- done
- ) | p4 client -i
-}
-
-#
# Verify these files exist, exactly. Caller creates
# a list of files in file "files".
#
@@ -96,19 +79,25 @@ test_expect_success 'init depot' '
test_expect_success 'unsupported view wildcard %%n' '
client_view "//depot/%%%%1/sub/... //client/sub/%%%%1/..." &&
test_when_finished cleanup_git &&
- test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot
+ test_must_fail git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'unsupported view wildcard *' '
client_view "//depot/*/bar/... //client/*/bar/..." &&
test_when_finished cleanup_git &&
- test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot
+ test_must_fail git p4 clone --use-client-spec --dest="$git" //depot
'
-test_expect_success 'wildcard ... only supported at end of spec' '
+test_expect_success 'wildcard ... only supported at end of spec 1' '
client_view "//depot/.../file11 //client/.../file11" &&
test_when_finished cleanup_git &&
- test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot
+ test_must_fail git p4 clone --use-client-spec --dest="$git" //depot
+'
+
+test_expect_success 'wildcard ... only supported at end of spec 2' '
+ client_view "//depot/.../a/... //client/.../a/..." &&
+ test_when_finished cleanup_git &&
+ test_must_fail git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'basic map' '
@@ -116,7 +105,7 @@ test_expect_success 'basic map' '
files="cli1/file11 cli1/file12" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -124,7 +113,7 @@ test_expect_success 'client view with no mappings' '
client_view &&
client_verify &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify
'
@@ -133,7 +122,7 @@ test_expect_success 'single file map' '
files="file11" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -144,7 +133,7 @@ test_expect_success 'later mapping takes precedence (entire repo)' '
cli2/dir2/file21 cli2/dir2/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -154,7 +143,7 @@ test_expect_success 'later mapping takes precedence (partial repo)' '
files="file21 file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -170,7 +159,7 @@ test_expect_success 'depot path matching rejected client path' '
files="cli12/file21 cli12/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -181,7 +170,7 @@ test_expect_success 'exclusion wildcard, client rhs same (odd)' '
"-//depot/dir2/... //client/..." &&
client_verify &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify
'
@@ -191,7 +180,7 @@ test_expect_success 'exclusion wildcard, client rhs different (normal)' '
files="dir1/file11 dir1/file12" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -201,7 +190,7 @@ test_expect_success 'exclusion single file' '
files="dir1/file11 dir1/file12 dir2/file21" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -211,7 +200,7 @@ test_expect_success 'overlay wildcard' '
files="cli/file11 cli/file12 cli/file21 cli/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -221,7 +210,7 @@ test_expect_success 'overlay single file' '
files="cli/file11 cli/file12 cli/file21" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -232,7 +221,7 @@ test_expect_success 'exclusion with later inclusion' '
files="dir1/file11 dir1/file12 dir2incl/file21 dir2incl/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
@@ -240,7 +229,7 @@ test_expect_success 'quotes on rhs only' '
client_view "//depot/dir1/... \"//client/cdir 1/...\"" &&
client_verify "cdir 1/file11" "cdir 1/file12" &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify "cdir 1/file11" "cdir 1/file12"
'
@@ -252,7 +241,7 @@ test_expect_success 'quotes on rhs only' '
test_expect_success 'clone --use-client-spec sets useClientSpec' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
(
cd "$git" &&
git config --bool git-p4.useClientSpec >actual &&
@@ -267,7 +256,7 @@ test_expect_success 'subdir clone' '
files="dir1/file11 dir1/file12 dir2/file21 dir2/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
git_verify dir1/file11 dir1/file12
'
@@ -277,14 +266,14 @@ test_expect_success 'subdir clone' '
test_expect_success 'subdir clone, submit modify' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
echo line >>dir1/file12 &&
git add dir1/file12 &&
git commit -m dir1/file12 &&
- "$GITP4" submit
+ git p4 submit
) &&
(
cd "$cli" &&
@@ -296,14 +285,14 @@ test_expect_success 'subdir clone, submit modify' '
test_expect_success 'subdir clone, submit add' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
echo file13 >dir1/file13 &&
git add dir1/file13 &&
git commit -m dir1/file13 &&
- "$GITP4" submit
+ git p4 submit
) &&
(
cd "$cli" &&
@@ -314,13 +303,13 @@ test_expect_success 'subdir clone, submit add' '
test_expect_success 'subdir clone, submit delete' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
git rm dir1/file12 &&
git commit -m "delete dir1/file12" &&
- "$GITP4" submit
+ git p4 submit
) &&
(
cd "$cli" &&
@@ -331,7 +320,7 @@ test_expect_success 'subdir clone, submit delete' '
test_expect_success 'subdir clone, submit copy' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
@@ -339,37 +328,71 @@ test_expect_success 'subdir clone, submit copy' '
cp dir1/file11 dir1/file11a &&
git add dir1/file11a &&
git commit -m "copy to dir1/file11a" &&
- "$GITP4" submit
+ git p4 submit
) &&
(
cd "$cli" &&
- test_path_is_file dir1/file11a
+ test_path_is_file dir1/file11a &&
+ test ! -w dir1/file11a
)
'
test_expect_success 'subdir clone, submit rename' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot/dir1 &&
+ git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
git config git-p4.detectRenames true &&
git mv dir1/file13 dir1/file13a &&
git commit -m "rename dir1/file13 to dir1/file13a" &&
- "$GITP4" submit
+ git p4 submit
) &&
(
cd "$cli" &&
test_path_is_missing dir1/file13 &&
- test_path_is_file dir1/file13a
+ test_path_is_file dir1/file13a &&
+ test ! -w dir1/file13a
+ )
+'
+
+# see t9800 for the non-client-spec case, and the rest of the wildcard tests
+test_expect_success 'wildcard files submit back to p4, client-spec case' '
+ client_view "//depot/... //client/..." &&
+ test_when_finished cleanup_git &&
+ git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
+ (
+ cd "$git" &&
+ echo git-wild-hash >dir1/git-wild#hash &&
+ echo git-wild-star >dir1/git-wild\*star &&
+ echo git-wild-at >dir1/git-wild@at &&
+ echo git-wild-percent >dir1/git-wild%percent &&
+ git add dir1/git-wild* &&
+ git commit -m "add some wildcard filenames" &&
+ git config git-p4.skipSubmitEditCheck true &&
+ git p4 submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_file dir1/git-wild#hash &&
+ test_path_is_file dir1/git-wild\*star &&
+ test_path_is_file dir1/git-wild@at &&
+ test_path_is_file dir1/git-wild%percent
+ ) &&
+ (
+ # delete these carefully, cannot just do "p4 delete"
+ # on files with wildcards; but git-p4 knows how
+ cd "$git" &&
+ git rm dir1/git-wild* &&
+ git commit -m "clean up the wildcards" &&
+ git p4 submit
)
'
test_expect_success 'reinit depot' '
(
cd "$cli" &&
- p4 sync -f &&
rm files &&
p4 delete */* &&
p4 submit -d "delete all files" &&
@@ -378,6 +401,393 @@ test_expect_success 'reinit depot' '
'
#
+# What happens when two files of the same name are overlayed together?
+# The last-listed file should take preference.
+#
+# //depot
+# - dir1
+# - file11
+# - file12
+# - filecollide
+# - dir2
+# - file21
+# - file22
+# - filecollide
+#
+test_expect_success 'overlay collision setup' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/filecollide >dir1/filecollide &&
+ p4 add dir1/filecollide &&
+ p4 submit -d dir1/filecollide &&
+ echo dir2/filecollide >dir2/filecollide &&
+ p4 add dir2/filecollide &&
+ p4 submit -d dir2/filecollide
+ )
+'
+
+test_expect_success 'overlay collision 1 to 2' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 filecollide" &&
+ echo dir2/filecollide >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/filecollide &&
+ test_when_finished cleanup_git &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/filecollide
+'
+
+test_expect_failure 'overlay collision 2 to 1' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 filecollide" &&
+ echo dir1/filecollide >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/filecollide &&
+ test_when_finished cleanup_git &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/filecollide
+'
+
+test_expect_success 'overlay collision delete 2' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir2/filecollide &&
+ p4 submit -d "remove dir2/filecollide"
+ )
+'
+
+# no filecollide, got deleted with dir2
+test_expect_failure 'overlay collision 1 to 2, but 2 deleted' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files
+'
+
+test_expect_success 'overlay collision update 1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 open dir1/filecollide &&
+ echo dir1/filecollide update >dir1/filecollide &&
+ p4 submit -d "update dir1/filecollide"
+ )
+'
+
+# still no filecollide, dir2 still wins with the deletion even though the
+# change to dir1 is more recent
+test_expect_failure 'overlay collision 1 to 2, but 2 deleted, then 1 updated' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files
+'
+
+test_expect_success 'overlay collision delete filecollides' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir1/filecollide dir2/filecollide &&
+ p4 submit -d "remove filecollides"
+ )
+'
+
+#
+# Overlays as part of sync, rather than initial checkout:
+# 1. add a file in dir1
+# 2. sync to include it
+# 3. add same file in dir2
+# 4. sync, make sure content switches as dir2 has priority
+# 5. add another file in dir1
+# 6. sync
+# 7. add/delete same file in dir2
+# 8. sync, make sure it disappears, again dir2 wins
+# 9. cleanup
+#
+# //depot
+# - dir1
+# - file11
+# - file12
+# - colA
+# - colB
+# - dir2
+# - file21
+# - file22
+# - colA
+# - colB
+#
+test_expect_success 'overlay sync: add colA in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colA >dir1/colA &&
+ p4 add dir1/colA &&
+ p4 submit -d dir1/colA
+ )
+'
+
+test_expect_success 'overlay sync: initial git checkout' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir1/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync: add colA in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colA >dir2/colA &&
+ p4 add dir2/colA &&
+ p4 submit -d dir2/colA
+ )
+'
+
+test_expect_success 'overlay sync: colA content switch' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir2/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ (
+ cd "$git" &&
+ git p4 sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync: add colB in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colB >dir1/colB &&
+ p4 add dir1/colB &&
+ p4 submit -d dir1/colB
+ )
+'
+
+test_expect_success 'overlay sync: colB appears' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA colB" &&
+ echo dir1/colB >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colB &&
+ (
+ cd "$git" &&
+ git p4 sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colB
+'
+
+test_expect_success 'overlay sync: add/delete colB in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colB >dir2/colB &&
+ p4 add dir2/colB &&
+ p4 submit -d dir2/colB &&
+ p4 delete dir2/colB &&
+ p4 submit -d "delete dir2/colB"
+ )
+'
+
+test_expect_success 'overlay sync: colB disappears' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git p4 sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files
+'
+
+test_expect_success 'overlay sync: cleanup' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir1/colA dir2/colA dir1/colB &&
+ p4 submit -d "remove overlay sync files"
+ )
+'
+
+#
+# Overlay tests again, but swapped so dir1 has priority.
+# 1. add a file in dir1
+# 2. sync to include it
+# 3. add same file in dir2
+# 4. sync, make sure content does not switch
+# 5. add another file in dir1
+# 6. sync
+# 7. add/delete same file in dir2
+# 8. sync, make sure it is still there
+# 9. cleanup
+#
+# //depot
+# - dir1
+# - file11
+# - file12
+# - colA
+# - colB
+# - dir2
+# - file21
+# - file22
+# - colA
+# - colB
+#
+test_expect_success 'overlay sync swap: add colA in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colA >dir1/colA &&
+ p4 add dir1/colA &&
+ p4 submit -d dir1/colA
+ )
+'
+
+test_expect_success 'overlay sync swap: initial git checkout' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir1/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync swap: add colA in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colA >dir2/colA &&
+ p4 add dir2/colA &&
+ p4 submit -d dir2/colA
+ )
+'
+
+test_expect_failure 'overlay sync swap: colA no content switch' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir1/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ (
+ cd "$git" &&
+ git p4 sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync swap: add colB in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colB >dir1/colB &&
+ p4 add dir1/colB &&
+ p4 submit -d dir1/colB
+ )
+'
+
+test_expect_success 'overlay sync swap: colB appears' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA colB" &&
+ echo dir1/colB >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colB &&
+ (
+ cd "$git" &&
+ git p4 sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colB
+'
+
+test_expect_success 'overlay sync swap: add/delete colB in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colB >dir2/colB &&
+ p4 add dir2/colB &&
+ p4 submit -d dir2/colB &&
+ p4 delete dir2/colB &&
+ p4 submit -d "delete dir2/colB"
+ )
+'
+
+test_expect_failure 'overlay sync swap: colB no change' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA colB" &&
+ echo dir1/colB >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colB &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git p4 sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$cli"/colB
+'
+
+test_expect_success 'overlay sync swap: cleanup' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir1/colA dir2/colA dir1/colB &&
+ p4 submit -d "remove overlay sync files"
+ )
+'
+
+#
# Rename directories to test quoting in depot-side mappings
# //depot
# - "dir 1"
@@ -408,7 +818,7 @@ test_expect_success 'quotes on lhs only' '
files="cdir1/file11 cdir1/file12" &&
client_verify $files &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
client_verify $files
'
@@ -416,7 +826,7 @@ test_expect_success 'quotes on both sides' '
client_view "\"//depot/dir 1/...\" \"//client/cdir 1/...\"" &&
client_verify "cdir 1/file11" "cdir 1/file12" &&
test_when_finished cleanup_git &&
- "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify "cdir 1/file11" "cdir 1/file12"
'
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 18:02:15 +0000