diff options
Diffstat (limited to 't/t9809-git-p4-client-view.sh')
| -rwxr-xr-x | t/t9809-git-p4-client-view.sh | 395 |
1 files changed, 394 insertions, 1 deletions
diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh index b0c6d4391d..773a516ff0 100755 --- a/t/t9809-git-p4-client-view.sh +++ b/t/t9809-git-p4-client-view.sh @@ -105,12 +105,18 @@ test_expect_success 'unsupported view wildcard *' ' test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot ' -test_expect_success 'wildcard ... only supported at end of spec' ' +test_expect_success 'wildcard ... only supported at end of spec 1' ' client_view "//depot/.../file11 //client/.../file11" && test_when_finished cleanup_git && test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot ' +test_expect_success 'wildcard ... only supported at end of spec 2' ' + client_view "//depot/.../a/... //client/.../a/..." && + test_when_finished cleanup_git && + test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot +' + test_expect_success 'basic map' ' client_view "//depot/dir1/... //client/cli1/..." && files="cli1/file11 cli1/file12" && @@ -378,6 +384,393 @@ test_expect_success 'reinit depot' ' ' # +# What happens when two files of the same name are overlayed together? +# The last-listed file should take preference. +# +# //depot +# - dir1 +# - file11 +# - file12 +# - filecollide +# - dir2 +# - file21 +# - file22 +# - filecollide +# +test_expect_success 'overlay collision setup' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/filecollide >dir1/filecollide && + p4 add dir1/filecollide && + p4 submit -d dir1/filecollide && + echo dir2/filecollide >dir2/filecollide && + p4 add dir2/filecollide && + p4 submit -d dir2/filecollide + ) +' + +test_expect_success 'overlay collision 1 to 2' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 filecollide" && + echo dir2/filecollide >actual && + client_verify $files && + test_cmp actual "$cli"/filecollide && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/filecollide +' + +test_expect_failure 'overlay collision 2 to 1' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 filecollide" && + echo dir1/filecollide >actual && + client_verify $files && + test_cmp actual "$cli"/filecollide && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/filecollide +' + +test_expect_success 'overlay collision delete 2' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir2/filecollide && + p4 submit -d "remove dir2/filecollide" + ) +' + +# no filecollide, got deleted with dir2 +test_expect_failure 'overlay collision 1 to 2, but 2 deleted' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay collision update 1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + p4 open dir1/filecollide && + echo dir1/filecollide update >dir1/filecollide && + p4 submit -d "update dir1/filecollide" + ) +' + +# still no filecollide, dir2 still wins with the deletion even though the +# change to dir1 is more recent +test_expect_failure 'overlay collision 1 to 2, but 2 deleted, then 1 updated' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22" && + client_verify $files && + test_when_finished cleanup_git && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files +' + +test_expect_success 'overlay collision delete filecollides' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir1/filecollide dir2/filecollide && + p4 submit -d "remove filecollides" + ) +' + +# +# Overlays as part of sync, rather than initial checkout: +# 1. add a file in dir1 +# 2. sync to include it +# 3. add same file in dir2 +# 4. sync, make sure content switches as dir2 has priority +# 5. add another file in dir1 +# 6. sync +# 7. add/delete same file in dir2 +# 8. sync, make sure it disappears, again dir2 wins +# 9. cleanup +# +# //depot +# - dir1 +# - file11 +# - file12 +# - colA +# - colB +# - dir2 +# - file21 +# - file22 +# - colA +# - colB +# +test_expect_success 'overlay sync: add colA in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colA >dir1/colA && + p4 add dir1/colA && + p4 submit -d dir1/colA + ) +' + +test_expect_success 'overlay sync: initial git checkout' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir1/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync: add colA in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colA >dir2/colA && + p4 add dir2/colA && + p4 submit -d dir2/colA + ) +' + +test_expect_success 'overlay sync: colA content switch' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir2/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + ( + cd "$git" && + "$GITP4" sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync: add colB in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colB >dir1/colB && + p4 add dir1/colB && + p4 submit -d dir1/colB + ) +' + +test_expect_success 'overlay sync: colB appears' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA colB" && + echo dir1/colB >actual && + client_verify $files && + test_cmp actual "$cli"/colB && + ( + cd "$git" && + "$GITP4" sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colB +' + +test_expect_success 'overlay sync: add/delete colB in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colB >dir2/colB && + p4 add dir2/colB && + p4 submit -d dir2/colB && + p4 delete dir2/colB && + p4 submit -d "delete dir2/colB" + ) +' + +test_expect_success 'overlay sync: colB disappears' ' + client_view "//depot/dir1/... //client/..." \ + "+//depot/dir2/... //client/..." && + files="file11 file12 file21 file22 colA" && + client_verify $files && + test_when_finished cleanup_git && + ( + cd "$git" && + "$GITP4" sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files +' + +test_expect_success 'overlay sync: cleanup' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir1/colA dir2/colA dir1/colB && + p4 submit -d "remove overlay sync files" + ) +' + +# +# Overlay tests again, but swapped so dir1 has priority. +# 1. add a file in dir1 +# 2. sync to include it +# 3. add same file in dir2 +# 4. sync, make sure content does not switch +# 5. add another file in dir1 +# 6. sync +# 7. add/delete same file in dir2 +# 8. sync, make sure it is still there +# 9. cleanup +# +# //depot +# - dir1 +# - file11 +# - file12 +# - colA +# - colB +# - dir2 +# - file21 +# - file22 +# - colA +# - colB +# +test_expect_success 'overlay sync swap: add colA in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colA >dir1/colA && + p4 add dir1/colA && + p4 submit -d dir1/colA + ) +' + +test_expect_success 'overlay sync swap: initial git checkout' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir1/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + "$GITP4" clone --use-client-spec --dest="$git" //depot && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync swap: add colA in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colA >dir2/colA && + p4 add dir2/colA && + p4 submit -d dir2/colA + ) +' + +test_expect_failure 'overlay sync swap: colA no content switch' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA" && + echo dir1/colA >actual && + client_verify $files && + test_cmp actual "$cli"/colA && + ( + cd "$git" && + "$GITP4" sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colA +' + +test_expect_success 'overlay sync swap: add colB in dir1' ' + client_view "//depot/dir1/... //client/dir1/..." && + ( + cd "$cli" && + p4 sync && + echo dir1/colB >dir1/colB && + p4 add dir1/colB && + p4 submit -d dir1/colB + ) +' + +test_expect_success 'overlay sync swap: colB appears' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA colB" && + echo dir1/colB >actual && + client_verify $files && + test_cmp actual "$cli"/colB && + ( + cd "$git" && + "$GITP4" sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$git"/colB +' + +test_expect_success 'overlay sync swap: add/delete colB in dir2' ' + client_view "//depot/dir2/... //client/dir2/..." && + ( + cd "$cli" && + p4 sync && + echo dir2/colB >dir2/colB && + p4 add dir2/colB && + p4 submit -d dir2/colB && + p4 delete dir2/colB && + p4 submit -d "delete dir2/colB" + ) +' + +test_expect_failure 'overlay sync swap: colB no change' ' + client_view "//depot/dir2/... //client/..." \ + "+//depot/dir1/... //client/..." && + files="file11 file12 file21 file22 colA colB" && + echo dir1/colB >actual && + client_verify $files && + test_cmp actual "$cli"/colB && + test_when_finished cleanup_git && + ( + cd "$git" && + "$GITP4" sync --use-client-spec && + git merge --ff-only p4/master + ) && + git_verify $files && + test_cmp actual "$cli"/colB +' + +test_expect_success 'overlay sync swap: cleanup' ' + client_view "//depot/... //client/..." && + ( + cd "$cli" && + p4 sync && + p4 delete dir1/colA dir2/colA dir1/colB && + p4 submit -d "remove overlay sync files" + ) +' + +# # Rename directories to test quoting in depot-side mappings # //depot # - "dir 1" |