diff options
Diffstat (limited to 't/t9800-git-p4.sh')
| -rwxr-xr-x | t/t9800-git-p4.sh | 322 |
1 files changed, 267 insertions, 55 deletions
diff --git a/t/t9800-git-p4.sh b/t/t9800-git-p4.sh index 33b0127651..01ba041fde 100755 --- a/t/t9800-git-p4.sh +++ b/t/t9800-git-p4.sh @@ -45,29 +45,33 @@ test_expect_success 'add p4 files' ' cd "$TRASH_DIRECTORY" ' +cleanup_git() { + cd "$TRASH_DIRECTORY" && + rm -rf "$git" && + mkdir "$git" +} + test_expect_success 'basic git-p4 clone' ' "$GITP4" clone --dest="$git" //depot && + test_when_finished cleanup_git && cd "$git" && git log --oneline >lines && - test_line_count = 1 lines && - cd .. && - rm -rf "$git" && mkdir "$git" + test_line_count = 1 lines ' test_expect_success 'git-p4 clone @all' ' "$GITP4" clone --dest="$git" //depot@all && + test_when_finished cleanup_git && cd "$git" && git log --oneline >lines && - test_line_count = 2 lines && - cd .. && - rm -rf "$git" && mkdir "$git" + test_line_count = 2 lines ' test_expect_success 'git-p4 sync uninitialized repo' ' test_create_repo "$git" && + test_when_finished cleanup_git && cd "$git" && - test_must_fail "$GITP4" sync && - rm -rf "$git" && mkdir "$git" + test_must_fail "$GITP4" sync ' # @@ -76,19 +80,18 @@ test_expect_success 'git-p4 sync uninitialized repo' ' # test_expect_success 'git-p4 sync new branch' ' test_create_repo "$git" && + test_when_finished cleanup_git && cd "$git" && test_commit head && "$GITP4" sync --branch=refs/remotes/p4/depot //depot@all && git log --oneline p4/depot >lines && - cat lines && - test_line_count = 2 lines && - cd .. && - rm -rf "$git" && mkdir "$git" + test_line_count = 2 lines ' test_expect_success 'exit when p4 fails to produce marshaled output' ' badp4dir="$TRASH_DIRECTORY/badp4dir" && mkdir -p "$badp4dir" && + test_when_finished "rm -rf $badp4dir" && cat >"$badp4dir"/p4 <<-EOF && #!$SHELL_PATH exit 1 @@ -106,29 +109,26 @@ test_expect_success 'add p4 files with wildcards in the names' ' echo file-wild-at >file-wild@at && echo file-wild-percent >file-wild%percent && p4 add -f file-wild* && - p4 submit -d "file wildcards" && - cd "$TRASH_DIRECTORY" + p4 submit -d "file wildcards" ' test_expect_success 'wildcard files git-p4 clone' ' "$GITP4" clone --dest="$git" //depot && + test_when_finished cleanup_git && cd "$git" && test -f file-wild#hash && test -f file-wild\*star && test -f file-wild@at && - test -f file-wild%percent && - cd "$TRASH_DIRECTORY" && - rm -rf "$git" && mkdir "$git" + test -f file-wild%percent ' test_expect_success 'clone bare' ' "$GITP4" clone --dest="$git" --bare //depot && + test_when_finished cleanup_git && cd "$git" && test ! -d .git && bare=`git config --get core.bare` && - test "$bare" = true && - cd "$TRASH_DIRECTORY" && - rm -rf "$git" && mkdir "$git" + test "$bare" = true ' p4_add_user() { @@ -173,6 +173,7 @@ test_expect_success 'preserve users' ' p4_add_user bob Bob && p4_grant_admin alice && "$GITP4" clone --dest="$git" //depot && + test_when_finished cleanup_git && cd "$git" && echo "username: a change by alice" >> file1 && echo "username: a change by bob" >> file2 && @@ -181,29 +182,28 @@ test_expect_success 'preserve users' ' git config git-p4.skipSubmitEditCheck true && P4EDITOR=touch P4USER=alice P4PASSWD=secret "$GITP4" commit --preserve-user && p4_check_commit_author file1 alice && - p4_check_commit_author file2 bob && - cd "$TRASH_DIRECTORY" && - rm -rf "$git" && mkdir "$git" + p4_check_commit_author file2 bob ' # Test username support, submitting as bob, who lacks admin rights. Should # not submit change to p4 (git diff should show deltas). test_expect_success 'refuse to preserve users without perms' ' "$GITP4" clone --dest="$git" //depot && + test_when_finished cleanup_git && cd "$git" && + git config git-p4.skipSubmitEditCheck true && echo "username-noperms: a change by alice" >> file1 && git commit --author "Alice <alice@localhost>" -m "perms: a change by alice" file1 && ! P4EDITOR=touch P4USER=bob P4PASSWD=secret "$GITP4" commit --preserve-user && - ! git diff --exit-code HEAD..p4/master > /dev/null && - cd "$TRASH_DIRECTORY" && - rm -rf "$git" && mkdir "$git" + ! git diff --exit-code HEAD..p4/master > /dev/null ' # What happens with unknown author? Without allowMissingP4Users it should fail. test_expect_success 'preserve user where author is unknown to p4' ' "$GITP4" clone --dest="$git" //depot && + test_when_finished cleanup_git && cd "$git" && - git config git-p4.skipSubmitEditCheck true + git config git-p4.skipSubmitEditCheck true && echo "username-bob: a change by bob" >> file1 && git commit --author "Bob <bob@localhost>" -m "preserve: a change by bob" file1 && echo "username-unknown: a change by charlie" >> file1 && @@ -215,9 +215,7 @@ test_expect_success 'preserve user where author is unknown to p4' ' git config git-p4.preserveUser true && P4EDITOR=touch P4USER=alice P4PASSWD=secret "$GITP4" commit && git diff --exit-code HEAD..p4/master > /dev/null && - p4_check_commit_author file1 alice && - cd "$TRASH_DIRECTORY" && - rm -rf "$git" && mkdir "$git" + p4_check_commit_author file1 alice ' # If we're *not* using --preserve-user, git-p4 should warn if we're submitting @@ -226,33 +224,247 @@ test_expect_success 'preserve user where author is unknown to p4' ' # Test: warning disabled and user is the same. test_expect_success 'not preserving user with mixed authorship' ' "$GITP4" clone --dest="$git" //depot && - ( - cd "$git" && - git config git-p4.skipSubmitEditCheck true && - p4_add_user derek Derek && - - make_change_by_user usernamefile3 Derek derek@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit >actual && - grep "git author derek@localhost does not match" actual && - - make_change_by_user usernamefile3 Charlie charlie@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit >actual && - grep "git author charlie@localhost does not match" actual && - - make_change_by_user usernamefile3 alice alice@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit >actual && - ! grep "git author.*does not match" actual && - - git config git-p4.skipUserNameCheck true && - make_change_by_user usernamefile3 Charlie charlie@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit >actual && - ! grep "git author.*does not match" actual && - - p4_check_commit_author usernamefile3 alice - ) && - rm -rf "$git" && mkdir "$git" + test_when_finished cleanup_git && + cd "$git" && + git config git-p4.skipSubmitEditCheck true && + p4_add_user derek Derek && + + make_change_by_user usernamefile3 Derek derek@localhost && + P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit >actual && + grep "git author derek@localhost does not match" actual && + + make_change_by_user usernamefile3 Charlie charlie@localhost && + P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit >actual && + grep "git author charlie@localhost does not match" actual && + + make_change_by_user usernamefile3 alice alice@localhost && + P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit >actual && + ! grep "git author.*does not match" actual && + + git config git-p4.skipUserNameCheck true && + make_change_by_user usernamefile3 Charlie charlie@localhost && + P4EDITOR=cat P4USER=alice P4PASSWD=secret "$GITP4" commit >actual && + ! grep "git author.*does not match" actual && + + p4_check_commit_author usernamefile3 alice ' +marshal_dump() { + what=$1 + python -c 'import marshal, sys; d = marshal.load(sys.stdin); print d["'$what'"]' +} + +# Sleep a bit so that the top-most p4 change did not happen "now". Then +# import the repo and make sure that the initial import has the same time +# as the top-most change. +test_expect_success 'initial import time from top change time' ' + p4change=$(p4 -G changes -m 1 //depot/... | marshal_dump change) && + p4time=$(p4 -G changes -m 1 //depot/... | marshal_dump time) && + sleep 3 && + "$GITP4" clone --dest="$git" //depot && + test_when_finished cleanup_git && + cd "$git" && + gittime=$(git show -s --raw --pretty=format:%at HEAD) && + echo $p4time $gittime && + test $p4time = $gittime +' + +# Rename a file and confirm that rename is not detected in P4. +# Rename the new file again with detectRenames option enabled and confirm that +# this is detected in P4. +# Rename the new file again adding an extra line, configure a big threshold in +# detectRenames and confirm that rename is not detected in P4. +# Repeat, this time with a smaller threshold and confirm that the rename is +# detected in P4. +test_expect_success 'detect renames' ' + "$GITP4" clone --dest="$git" //depot@all && + test_when_finished cleanup_git && + cd "$git" && + git config git-p4.skipSubmitEditCheck true && + + git mv file1 file4 && + git commit -a -m "Rename file1 to file4" && + git diff-tree -r -M HEAD && + "$GITP4" submit && + p4 filelog //depot/file4 && + ! p4 filelog //depot/file4 | grep -q "branch from" && + + git mv file4 file5 && + git commit -a -m "Rename file4 to file5" && + git diff-tree -r -M HEAD && + git config git-p4.detectRenames true && + "$GITP4" submit && + p4 filelog //depot/file5 && + p4 filelog //depot/file5 | grep -q "branch from //depot/file4" && + + git mv file5 file6 && + echo update >>file6 && + git add file6 && + git commit -a -m "Rename file5 to file6 with changes" && + git diff-tree -r -M HEAD && + level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") && + test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && + git config git-p4.detectRenames $((level + 2)) && + "$GITP4" submit && + p4 filelog //depot/file6 && + ! p4 filelog //depot/file6 | grep -q "branch from" && + + git mv file6 file7 && + echo update >>file7 && + git add file7 && + git commit -a -m "Rename file6 to file7 with changes" && + git diff-tree -r -M HEAD && + level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") && + test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && + git config git-p4.detectRenames $((level - 2)) && + "$GITP4" submit && + p4 filelog //depot/file7 && + p4 filelog //depot/file7 | grep -q "branch from //depot/file6" +' + +# Copy a file and confirm that copy is not detected in P4. +# Copy a file with detectCopies option enabled and confirm that copy is not +# detected in P4. +# Modify and copy a file with detectCopies option enabled and confirm that copy +# is detected in P4. +# Copy a file with detectCopies and detectCopiesHarder options enabled and +# confirm that copy is detected in P4. +# Modify and copy a file, configure a bigger threshold in detectCopies and +# confirm that copy is not detected in P4. +# Modify and copy a file, configure a smaller threshold in detectCopies and +# confirm that copy is detected in P4. +test_expect_success 'detect copies' ' + "$GITP4" clone --dest="$git" //depot@all && + test_when_finished cleanup_git && + cd "$git" && + git config git-p4.skipSubmitEditCheck true && + + cp file2 file8 && + git add file8 && + git commit -a -m "Copy file2 to file8" && + git diff-tree -r -C HEAD && + "$GITP4" submit && + p4 filelog //depot/file8 && + ! p4 filelog //depot/file8 | grep -q "branch from" && + + cp file2 file9 && + git add file9 && + git commit -a -m "Copy file2 to file9" && + git diff-tree -r -C HEAD && + git config git-p4.detectCopies true && + "$GITP4" submit && + p4 filelog //depot/file9 && + ! p4 filelog //depot/file9 | grep -q "branch from" && + + echo "file2" >>file2 && + cp file2 file10 && + git add file2 file10 && + git commit -a -m "Modify and copy file2 to file10" && + git diff-tree -r -C HEAD && + "$GITP4" submit && + p4 filelog //depot/file10 && + p4 filelog //depot/file10 | grep -q "branch from //depot/file" && + + cp file2 file11 && + git add file11 && + git commit -a -m "Copy file2 to file11" && + git diff-tree -r -C --find-copies-harder HEAD && + src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && + test "$src" = file10 && + git config git-p4.detectCopiesHarder true && + "$GITP4" submit && + p4 filelog //depot/file11 && + p4 filelog //depot/file11 | grep -q "branch from //depot/file" && + + cp file2 file12 && + echo "some text" >>file12 && + git add file12 && + git commit -a -m "Copy file2 to file12 with changes" && + git diff-tree -r -C --find-copies-harder HEAD && + level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && + test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && + src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && + test "$src" = file10 && + git config git-p4.detectCopies $((level + 2)) && + "$GITP4" submit && + p4 filelog //depot/file12 && + ! p4 filelog //depot/file12 | grep -q "branch from" && + + cp file2 file13 && + echo "different text" >>file13 && + git add file13 && + git commit -a -m "Copy file2 to file13 with changes" && + git diff-tree -r -C --find-copies-harder HEAD && + level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && + test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && + src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && + test "$src" = file10 && + git config git-p4.detectCopies $((level - 2)) && + "$GITP4" submit && + p4 filelog //depot/file13 && + p4 filelog //depot/file13 | grep -q "branch from //depot/file" +' + +# Create a simple branch structure in P4 depot to check if it is correctly +# cloned. +test_expect_success 'add simple p4 branches' ' + cd "$cli" && + mkdir branch1 && + cd branch1 && + echo file1 >file1 && + echo file2 >file2 && + p4 add file1 file2 && + p4 submit -d "branch1" && + p4 integrate //depot/branch1/... //depot/branch2/... && + p4 submit -d "branch2" && + echo file3 >file3 && + p4 add file3 && + p4 submit -d "add file3 in branch1" && + p4 open file2 && + echo update >>file2 && + p4 submit -d "update file2 in branch1" && + p4 integrate //depot/branch1/... //depot/branch3/... && + p4 submit -d "branch3" && + cd "$TRASH_DIRECTORY" +' + +# Configure branches through git-config and clone them. +# All files are tested to make sure branches were cloned correctly. +# Finally, make an update to branch1 on P4 side to check if it is imported +# correctly by git-p4. +test_expect_success 'git-p4 clone simple branches' ' + test_when_finished cleanup_git && + test_create_repo "$git" && + cd "$git" && + git config git-p4.branchList branch1:branch2 && + git config --add git-p4.branchList branch1:branch3 && + "$GITP4" clone --dest=. --detect-branches //depot@all && + git log --all --graph --decorate --stat && + git reset --hard p4/depot/branch1 && + test -f file1 && + test -f file2 && + test -f file3 && + grep -q update file2 && + git reset --hard p4/depot/branch2 && + test -f file1 && + test -f file2 && + test ! -f file3 && + ! grep -q update file2 && + git reset --hard p4/depot/branch3 && + test -f file1 && + test -f file2 && + test -f file3 && + grep -q update file2 && + cd "$cli" && + cd branch1 && + p4 edit file2 && + echo file2_ >>file2 && + p4 submit -d "update file2 in branch1" && + cd "$git" && + git reset --hard p4/depot/branch1 && + "$GITP4" rebase && + grep -q file2_ file2 +' test_expect_success 'shutdown' ' pid=`pgrep -f p4d` && |