diff options
Diffstat (limited to 't/t9800-git-p4-basic.sh')
| -rwxr-xr-x | t/t9800-git-p4-basic.sh | 317 |
1 files changed, 13 insertions, 304 deletions
diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 13be144459..b7ad716b09 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -45,7 +45,8 @@ test_expect_success 'git p4 sync uninitialized repo' ' test_when_finished cleanup_git && ( cd "$git" && - test_must_fail git p4 sync + test_must_fail git p4 sync 2>errs && + test_i18ngrep "Perhaps you never did" errs ) ' @@ -126,44 +127,24 @@ test_expect_success 'clone two dirs, @all, conflicting files' ' ' test_expect_success 'exit when p4 fails to produce marshaled output' ' - badp4dir="$TRASH_DIRECTORY/badp4dir" && - mkdir "$badp4dir" && - test_when_finished "rm \"$badp4dir/p4\" && rmdir \"$badp4dir\"" && - cat >"$badp4dir"/p4 <<-EOF && + mkdir badp4dir && + test_when_finished "rm badp4dir/p4 && rmdir badp4dir" && + cat >badp4dir/p4 <<-EOF && #!$SHELL_PATH exit 1 EOF - chmod 755 "$badp4dir"/p4 && - PATH="$badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? && - test $retval -eq 1 && - test_must_fail grep -q Traceback errs -' - -test_expect_success 'add p4 files with wildcards in the names' ' - ( - cd "$cli" && - echo file-wild-hash >file-wild#hash && - echo file-wild-star >file-wild\*star && - echo file-wild-at >file-wild@at && - echo file-wild-percent >file-wild%percent && - p4 add -f file-wild* && - p4 submit -d "file wildcards" - ) -' - -test_expect_success 'wildcard files git p4 clone' ' - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && + chmod 755 badp4dir/p4 && ( - cd "$git" && - test -f file-wild#hash && - test -f file-wild\*star && - test -f file-wild@at && - test -f file-wild%percent - ) + PATH="$TRASH_DIRECTORY/badp4dir:$PATH" && + export PATH && + test_expect_code 1 git p4 clone --dest="$git" //depot >errs 2>&1 + ) && + cat errs && + ! test_i18ngrep Traceback errs ' test_expect_success 'clone bare' ' + rm -rf "$git" && git p4 clone --dest="$git" --bare //depot && test_when_finished cleanup_git && ( @@ -174,138 +155,6 @@ test_expect_success 'clone bare' ' ) ' -p4_add_user() { - name=$1 fullname=$2 && - p4 user -f -i <<-EOF && - User: $name - Email: $name@localhost - FullName: $fullname - EOF - p4 passwd -P secret $name -} - -p4_grant_admin() { - name=$1 && - { - p4 protect -o && - echo " admin user $name * //depot/..." - } | p4 protect -i -} - -p4_check_commit_author() { - file=$1 user=$2 && - p4 changes -m 1 //depot/$file | grep -q $user -} - -make_change_by_user() { - file=$1 name=$2 email=$3 && - echo "username: a change by $name" >>"$file" && - git add "$file" && - git commit --author "$name <$email>" -m "a change by $name" -} - -# Test username support, submitting as user 'alice' -test_expect_success 'preserve users' ' - p4_add_user alice Alice && - p4_add_user bob Bob && - p4_grant_admin alice && - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && - ( - cd "$git" && - echo "username: a change by alice" >>file1 && - echo "username: a change by bob" >>file2 && - git commit --author "Alice <alice@localhost>" -m "a change by alice" file1 && - git commit --author "Bob <bob@localhost>" -m "a change by bob" file2 && - git config git-p4.skipSubmitEditCheck true && - P4EDITOR=touch P4USER=alice P4PASSWD=secret git p4 commit --preserve-user && - p4_check_commit_author file1 alice && - p4_check_commit_author file2 bob - ) -' - -# Test username support, submitting as bob, who lacks admin rights. Should -# not submit change to p4 (git diff should show deltas). -test_expect_success 'refuse to preserve users without perms' ' - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEditCheck true && - echo "username-noperms: a change by alice" >>file1 && - git commit --author "Alice <alice@localhost>" -m "perms: a change by alice" file1 && - P4EDITOR=touch P4USER=bob P4PASSWD=secret && - export P4EDITOR P4USER P4PASSWD && - test_must_fail git p4 commit --preserve-user && - ! git diff --exit-code HEAD..p4/master - ) -' - -# What happens with unknown author? Without allowMissingP4Users it should fail. -test_expect_success 'preserve user where author is unknown to p4' ' - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEditCheck true && - echo "username-bob: a change by bob" >>file1 && - git commit --author "Bob <bob@localhost>" -m "preserve: a change by bob" file1 && - echo "username-unknown: a change by charlie" >>file1 && - git commit --author "Charlie <charlie@localhost>" -m "preserve: a change by charlie" file1 && - P4EDITOR=touch P4USER=alice P4PASSWD=secret && - export P4EDITOR P4USER P4PASSWD && - test_must_fail git p4 commit --preserve-user && - ! git diff --exit-code HEAD..p4/master && - - echo "$0: repeat with allowMissingP4Users enabled" && - git config git-p4.allowMissingP4Users true && - git config git-p4.preserveUser true && - git p4 commit && - git diff --exit-code HEAD..p4/master && - p4_check_commit_author file1 alice - ) -' - -# If we're *not* using --preserve-user, git p4 should warn if we're submitting -# changes that are not all ours. -# Test: user in p4 and user unknown to p4. -# Test: warning disabled and user is the same. -test_expect_success 'not preserving user with mixed authorship' ' - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEditCheck true && - p4_add_user derek Derek && - - make_change_by_user usernamefile3 Derek derek@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret && - export P4EDITOR P4USER P4PASSWD && - git p4 commit |\ - grep "git author derek@localhost does not match" && - - make_change_by_user usernamefile3 Charlie charlie@localhost && - git p4 commit |\ - grep "git author charlie@localhost does not match" && - - make_change_by_user usernamefile3 alice alice@localhost && - git p4 commit |\ - test_must_fail grep "git author.*does not match" && - - git config git-p4.skipUserNameCheck true && - make_change_by_user usernamefile3 Charlie charlie@localhost && - git p4 commit |\ - test_must_fail grep "git author.*does not match" && - - p4_check_commit_author usernamefile3 alice - ) -' - -marshal_dump() { - what=$1 - "$PYTHON_PATH" -c 'import marshal, sys; d = marshal.load(sys.stdin); print d["'$what'"]' -} - # Sleep a bit so that the top-most p4 change did not happen "now". Then # import the repo and make sure that the initial import has the same time # as the top-most change. @@ -323,146 +172,6 @@ test_expect_success 'initial import time from top change time' ' ) ' -# Rename a file and confirm that rename is not detected in P4. -# Rename the new file again with detectRenames option enabled and confirm that -# this is detected in P4. -# Rename the new file again adding an extra line, configure a big threshold in -# detectRenames and confirm that rename is not detected in P4. -# Repeat, this time with a smaller threshold and confirm that the rename is -# detected in P4. -test_expect_success 'detect renames' ' - git p4 clone --dest="$git" //depot@all && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEditCheck true && - - git mv file1 file4 && - git commit -a -m "Rename file1 to file4" && - git diff-tree -r -M HEAD && - git p4 submit && - p4 filelog //depot/file4 && - p4 filelog //depot/file4 | test_must_fail grep -q "branch from" && - - git mv file4 file5 && - git commit -a -m "Rename file4 to file5" && - git diff-tree -r -M HEAD && - git config git-p4.detectRenames true && - git p4 submit && - p4 filelog //depot/file5 && - p4 filelog //depot/file5 | grep -q "branch from //depot/file4" && - - git mv file5 file6 && - echo update >>file6 && - git add file6 && - git commit -a -m "Rename file5 to file6 with changes" && - git diff-tree -r -M HEAD && - level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") && - test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && - git config git-p4.detectRenames $(($level + 2)) && - git p4 submit && - p4 filelog //depot/file6 && - p4 filelog //depot/file6 | test_must_fail grep -q "branch from" && - - git mv file6 file7 && - echo update >>file7 && - git add file7 && - git commit -a -m "Rename file6 to file7 with changes" && - git diff-tree -r -M HEAD && - level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") && - test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && - git config git-p4.detectRenames $(($level - 2)) && - git p4 submit && - p4 filelog //depot/file7 && - p4 filelog //depot/file7 | grep -q "branch from //depot/file6" - ) -' - -# Copy a file and confirm that copy is not detected in P4. -# Copy a file with detectCopies option enabled and confirm that copy is not -# detected in P4. -# Modify and copy a file with detectCopies option enabled and confirm that copy -# is detected in P4. -# Copy a file with detectCopies and detectCopiesHarder options enabled and -# confirm that copy is detected in P4. -# Modify and copy a file, configure a bigger threshold in detectCopies and -# confirm that copy is not detected in P4. -# Modify and copy a file, configure a smaller threshold in detectCopies and -# confirm that copy is detected in P4. -test_expect_success 'detect copies' ' - git p4 clone --dest="$git" //depot@all && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEditCheck true && - - cp file2 file8 && - git add file8 && - git commit -a -m "Copy file2 to file8" && - git diff-tree -r -C HEAD && - git p4 submit && - p4 filelog //depot/file8 && - p4 filelog //depot/file8 | test_must_fail grep -q "branch from" && - - cp file2 file9 && - git add file9 && - git commit -a -m "Copy file2 to file9" && - git diff-tree -r -C HEAD && - git config git-p4.detectCopies true && - git p4 submit && - p4 filelog //depot/file9 && - p4 filelog //depot/file9 | test_must_fail grep -q "branch from" && - - echo "file2" >>file2 && - cp file2 file10 && - git add file2 file10 && - git commit -a -m "Modify and copy file2 to file10" && - git diff-tree -r -C HEAD && - git p4 submit && - p4 filelog //depot/file10 && - p4 filelog //depot/file10 | grep -q "branch from //depot/file" && - - cp file2 file11 && - git add file11 && - git commit -a -m "Copy file2 to file11" && - git diff-tree -r -C --find-copies-harder HEAD && - src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 && - git config git-p4.detectCopiesHarder true && - git p4 submit && - p4 filelog //depot/file11 && - p4 filelog //depot/file11 | grep -q "branch from //depot/file" && - - cp file2 file12 && - echo "some text" >>file12 && - git add file12 && - git commit -a -m "Copy file2 to file12 with changes" && - git diff-tree -r -C --find-copies-harder HEAD && - level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && - test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && - src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 && - git config git-p4.detectCopies $(($level + 2)) && - git p4 submit && - p4 filelog //depot/file12 && - p4 filelog //depot/file12 | test_must_fail grep -q "branch from" && - - cp file2 file13 && - echo "different text" >>file13 && - git add file13 && - git commit -a -m "Copy file2 to file13 with changes" && - git diff-tree -r -C --find-copies-harder HEAD && - level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && - test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && - src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 && - git config git-p4.detectCopies $(($level - 2)) && - git p4 submit && - p4 filelog //depot/file13 && - p4 filelog //depot/file13 | grep -q "branch from //depot/file" - ) -' - test_expect_success 'kill p4d' ' kill_p4d ' |