diff options
Diffstat (limited to 't/t9001-send-email.sh')
| -rwxr-xr-x | t/t9001-send-email.sh | 313 |
1 files changed, 271 insertions, 42 deletions
diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index cb3d183770..e426c96fb7 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -32,31 +32,76 @@ clean_fake_sendmail() { } test_expect_success 'Extract patches' ' - patches=`git format-patch -n HEAD^1` + patches=`git format-patch -s --cc="One <one@example.com>" --cc=two@example.com -n HEAD^1` ' +# Test no confirm early to ensure remaining tests will not hang +test_no_confirm () { + rm -f no_confirm_okay + echo n | \ + GIT_SEND_EMAIL_NOTTY=1 \ + git send-email \ + --from="Example <from@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $@ \ + $patches > stdout && + test_must_fail grep "Send this email" stdout && + > no_confirm_okay +} + +# Exit immediately to prevent hang if a no-confirm test fails +check_no_confirm () { + test -f no_confirm_okay || { + say 'No confirm test failed; skipping remaining tests to prevent hanging' + test_done + } +} + +test_expect_success 'No confirm with --suppress-cc' ' + test_no_confirm --suppress-cc=sob +' +check_no_confirm + +test_expect_success 'No confirm with --confirm=never' ' + test_no_confirm --confirm=never +' +check_no_confirm + +# leave sendemail.confirm set to never after this so that none of the +# remaining tests prompt unintentionally. +test_expect_success 'No confirm with sendemail.confirm=never' ' + git config sendemail.confirm never && + test_no_confirm --compose --subject=foo +' +check_no_confirm + test_expect_success 'Send patches' ' - git send-email --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors + git send-email --suppress-cc=sob --from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" $patches 2>errors ' cat >expected <<\EOF !nobody@example.com! !author@example.com! +!one@example.com! +!two@example.com! EOF test_expect_success \ 'Verify commandline' \ - 'diff commandline1 expected' + 'test_cmp expected commandline1' cat >expected-show-all-headers <<\EOF 0001-Second.patch (mbox) Adding cc: A <author@example.com> from line 'From: A <author@example.com>' +(mbox) Adding cc: One <one@example.com> from line 'Cc: One <one@example.com>, two@example.com' +(mbox) Adding cc: two@example.com from line 'Cc: One <one@example.com>, two@example.com' Dry-OK. Log says: Server: relay.example.com MAIL FROM:<from@example.com> -RCPT TO:<to@example.com>,<cc@example.com>,<author@example.com>,<bcc@example.com> +RCPT TO:<to@example.com>,<cc@example.com>,<author@example.com>,<one@example.com>,<two@example.com>,<bcc@example.com> From: Example <from@example.com> To: to@example.com -Cc: cc@example.com, A <author@example.com> +Cc: cc@example.com, A <author@example.com>, One <one@example.com>, two@example.com Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING @@ -70,6 +115,7 @@ EOF test_expect_success 'Show all headers' ' git send-email \ --dry-run \ + --suppress-cc=sob \ --from="Example <from@example.com>" \ --to=to@example.com \ --cc=cc@example.com \ @@ -104,6 +150,28 @@ test_expect_success 'no patch was sent' ' ! test -e commandline1 ' +test_expect_success 'Author From: in message body' ' + clean_fake_sendmail && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && + sed "1,/^$/d" < msgtxt1 > msgbody1 + grep "From: A <author@example.com>" msgbody1 +' + +test_expect_success 'Author From: not in message body' ' + clean_fake_sendmail && + git send-email \ + --from="A <author@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches && + sed "1,/^$/d" < msgtxt1 > msgbody1 + ! grep "From: A <author@example.com>" msgbody1 +' + test_expect_success 'allow long lines with --no-validate' ' git send-email \ --from="Example <nobody@example.com>" \ @@ -148,15 +216,13 @@ test_set_editor "$(pwd)/fake-editor" test_expect_success '--compose works' ' clean_fake_sendmail && - echo y | \ - GIT_SEND_EMAIL_NOTTY=1 \ - git send-email \ - --compose --subject foo \ - --from="Example <nobody@example.com>" \ - --to=nobody@example.com \ - --smtp-server="$(pwd)/fake.sendmail" \ - $patches \ - 2>errors + git send-email \ + --compose --subject foo \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $patches \ + 2>errors ' test_expect_success 'first message is compose text' ' @@ -167,16 +233,18 @@ test_expect_success 'second message is patch' ' grep "Subject:.*Second" msgtxt2 ' -cat >expected-show-all-headers <<\EOF +cat >expected-suppress-sob <<\EOF 0001-Second.patch (mbox) Adding cc: A <author@example.com> from line 'From: A <author@example.com>' +(mbox) Adding cc: One <one@example.com> from line 'Cc: One <one@example.com>, two@example.com' +(mbox) Adding cc: two@example.com from line 'Cc: One <one@example.com>, two@example.com' Dry-OK. Log says: Server: relay.example.com MAIL FROM:<from@example.com> -RCPT TO:<to@example.com>,<cc@example.com>,<author@example.com> +RCPT TO:<to@example.com>,<cc@example.com>,<author@example.com>,<one@example.com>,<two@example.com> From: Example <from@example.com> To: to@example.com -Cc: cc@example.com, A <author@example.com> +Cc: cc@example.com, A <author@example.com>, One <one@example.com>, two@example.com Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING @@ -185,10 +253,10 @@ X-Mailer: X-MAILER-STRING Result: OK EOF -test_expect_success 'sendemail.cc set' ' - git config sendemail.cc cc@example.com && +test_suppression () { git send-email \ --dry-run \ + --suppress-cc=$1 \ --from="Example <from@example.com>" \ --to=to@example.com \ --smtp-server relay.example.com \ @@ -196,20 +264,27 @@ test_expect_success 'sendemail.cc set' ' sed -e "s/^\(Date:\).*/\1 DATE-STRING/" \ -e "s/^\(Message-Id:\).*/\1 MESSAGE-ID-STRING/" \ -e "s/^\(X-Mailer:\).*/\1 X-MAILER-STRING/" \ - >actual-show-all-headers && - test_cmp expected-show-all-headers actual-show-all-headers + >actual-suppress-$1 && + test_cmp expected-suppress-$1 actual-suppress-$1 +} + +test_expect_success 'sendemail.cc set' ' + git config sendemail.cc cc@example.com && + test_suppression sob ' -cat >expected-show-all-headers <<\EOF +cat >expected-suppress-sob <<\EOF 0001-Second.patch (mbox) Adding cc: A <author@example.com> from line 'From: A <author@example.com>' +(mbox) Adding cc: One <one@example.com> from line 'Cc: One <one@example.com>, two@example.com' +(mbox) Adding cc: two@example.com from line 'Cc: One <one@example.com>, two@example.com' Dry-OK. Log says: Server: relay.example.com MAIL FROM:<from@example.com> -RCPT TO:<to@example.com>,<author@example.com> +RCPT TO:<to@example.com>,<author@example.com>,<one@example.com>,<two@example.com> From: Example <from@example.com> To: to@example.com -Cc: A <author@example.com> +Cc: A <author@example.com>, One <one@example.com>, two@example.com Subject: [PATCH 1/1] Second. Date: DATE-STRING Message-Id: MESSAGE-ID-STRING @@ -220,17 +295,166 @@ EOF test_expect_success 'sendemail.cc unset' ' git config --unset sendemail.cc && - git send-email \ - --dry-run \ - --from="Example <from@example.com>" \ - --to=to@example.com \ - --smtp-server relay.example.com \ - $patches | - sed -e "s/^\(Date:\).*/\1 DATE-STRING/" \ - -e "s/^\(Message-Id:\).*/\1 MESSAGE-ID-STRING/" \ - -e "s/^\(X-Mailer:\).*/\1 X-MAILER-STRING/" \ - >actual-show-all-headers && - test_cmp expected-show-all-headers actual-show-all-headers + test_suppression sob +' + +cat >expected-suppress-all <<\EOF +0001-Second.patch +Dry-OK. Log says: +Server: relay.example.com +MAIL FROM:<from@example.com> +RCPT TO:<to@example.com> +From: Example <from@example.com> +To: to@example.com +Subject: [PATCH 1/1] Second. +Date: DATE-STRING +Message-Id: MESSAGE-ID-STRING +X-Mailer: X-MAILER-STRING + +Result: OK +EOF + +test_expect_success '--suppress-cc=all' ' + test_suppression all +' + +cat >expected-suppress-body <<\EOF +0001-Second.patch +(mbox) Adding cc: A <author@example.com> from line 'From: A <author@example.com>' +(mbox) Adding cc: One <one@example.com> from line 'Cc: One <one@example.com>, two@example.com' +(mbox) Adding cc: two@example.com from line 'Cc: One <one@example.com>, two@example.com' +Dry-OK. Log says: +Server: relay.example.com +MAIL FROM:<from@example.com> +RCPT TO:<to@example.com>,<author@example.com>,<one@example.com>,<two@example.com> +From: Example <from@example.com> +To: to@example.com +Cc: A <author@example.com>, One <one@example.com>, two@example.com +Subject: [PATCH 1/1] Second. +Date: DATE-STRING +Message-Id: MESSAGE-ID-STRING +X-Mailer: X-MAILER-STRING + +Result: OK +EOF + +test_expect_success '--suppress-cc=body' ' + test_suppression body +' + +cat >expected-suppress-sob <<\EOF +0001-Second.patch +(mbox) Adding cc: A <author@example.com> from line 'From: A <author@example.com>' +(mbox) Adding cc: One <one@example.com> from line 'Cc: One <one@example.com>, two@example.com' +(mbox) Adding cc: two@example.com from line 'Cc: One <one@example.com>, two@example.com' +Dry-OK. Log says: +Server: relay.example.com +MAIL FROM:<from@example.com> +RCPT TO:<to@example.com>,<author@example.com>,<one@example.com>,<two@example.com> +From: Example <from@example.com> +To: to@example.com +Cc: A <author@example.com>, One <one@example.com>, two@example.com +Subject: [PATCH 1/1] Second. +Date: DATE-STRING +Message-Id: MESSAGE-ID-STRING +X-Mailer: X-MAILER-STRING + +Result: OK +EOF + +test_expect_success '--suppress-cc=sob' ' + test_suppression sob +' + +cat >expected-suppress-bodycc <<\EOF +0001-Second.patch +(mbox) Adding cc: A <author@example.com> from line 'From: A <author@example.com>' +(mbox) Adding cc: One <one@example.com> from line 'Cc: One <one@example.com>, two@example.com' +(mbox) Adding cc: two@example.com from line 'Cc: One <one@example.com>, two@example.com' +(body) Adding cc: C O Mitter <committer@example.com> from line 'Signed-off-by: C O Mitter <committer@example.com>' +Dry-OK. Log says: +Server: relay.example.com +MAIL FROM:<from@example.com> +RCPT TO:<to@example.com>,<author@example.com>,<one@example.com>,<two@example.com>,<committer@example.com> +From: Example <from@example.com> +To: to@example.com +Cc: A <author@example.com>, One <one@example.com>, two@example.com, C O Mitter <committer@example.com> +Subject: [PATCH 1/1] Second. +Date: DATE-STRING +Message-Id: MESSAGE-ID-STRING +X-Mailer: X-MAILER-STRING + +Result: OK +EOF + +test_expect_success '--suppress-cc=bodycc' ' + test_suppression bodycc +' + +cat >expected-suppress-cc <<\EOF +0001-Second.patch +(mbox) Adding cc: A <author@example.com> from line 'From: A <author@example.com>' +(body) Adding cc: C O Mitter <committer@example.com> from line 'Signed-off-by: C O Mitter <committer@example.com>' +Dry-OK. Log says: +Server: relay.example.com +MAIL FROM:<from@example.com> +RCPT TO:<to@example.com>,<author@example.com>,<committer@example.com> +From: Example <from@example.com> +To: to@example.com +Cc: A <author@example.com>, C O Mitter <committer@example.com> +Subject: [PATCH 1/1] Second. +Date: DATE-STRING +Message-Id: MESSAGE-ID-STRING +X-Mailer: X-MAILER-STRING + +Result: OK +EOF + +test_expect_success '--suppress-cc=cc' ' + test_suppression cc +' + +test_confirm () { + echo y | \ + GIT_SEND_EMAIL_NOTTY=1 \ + git send-email \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + $@ \ + $patches | grep "Send this email" +} + +test_expect_success '--confirm=always' ' + test_confirm --confirm=always --suppress-cc=all +' + +test_expect_success '--confirm=auto' ' + test_confirm --confirm=auto +' + +test_expect_success '--confirm=cc' ' + test_confirm --confirm=cc +' + +test_expect_success '--confirm=compose' ' + test_confirm --confirm=compose --compose +' + +test_expect_success 'confirm by default (due to cc)' ' + CONFIRM=$(git config --get sendemail.confirm) && + git config --unset sendemail.confirm && + test_confirm && + git config sendemail.confirm $CONFIRM +' + +test_expect_success 'confirm by default (due to --compose)' ' + CONFIRM=$(git config --get sendemail.confirm) && + git config --unset sendemail.confirm && + test_confirm --suppress-cc=all --compose + ret="$?" + git config sendemail.confirm ${CONFIRM:-never} + test $ret = "0" ' test_expect_success '--compose adds MIME for utf8 body' ' @@ -239,9 +463,7 @@ test_expect_success '--compose adds MIME for utf8 body' ' echo "echo utf8 body: àéìöú >>\"\$1\"" ) >fake-editor-utf8 && chmod +x fake-editor-utf8 && - echo y | \ GIT_EDITOR="\"$(pwd)/fake-editor-utf8\"" \ - GIT_SEND_EMAIL_NOTTY=1 \ git send-email \ --compose --subject foo \ --from="Example <nobody@example.com>" \ @@ -263,9 +485,7 @@ test_expect_success '--compose respects user mime type' ' echo " echo utf8 body: àéìöú) >\"\$1\"" ) >fake-editor-utf8-mime && chmod +x fake-editor-utf8-mime && - echo y | \ GIT_EDITOR="\"$(pwd)/fake-editor-utf8-mime\"" \ - GIT_SEND_EMAIL_NOTTY=1 \ git send-email \ --compose --subject foo \ --from="Example <nobody@example.com>" \ @@ -279,9 +499,7 @@ test_expect_success '--compose respects user mime type' ' test_expect_success '--compose adds MIME for utf8 subject' ' clean_fake_sendmail && - echo y | \ GIT_EDITOR="\"$(pwd)/fake-editor\"" \ - GIT_SEND_EMAIL_NOTTY=1 \ git send-email \ --compose --subject utf8-sübjëct \ --from="Example <nobody@example.com>" \ @@ -303,7 +521,7 @@ test_expect_success 'detects ambiguous reference/file conflict' ' test_expect_success 'feed two files' ' rm -fr outdir && git format-patch -2 -o outdir && - GIT_SEND_EMAIL_NOTTY=1 git send-email \ + git send-email \ --dry-run \ --from="Example <nobody@example.com>" \ --to=nobody@example.com \ @@ -313,4 +531,15 @@ test_expect_success 'feed two files' ' test "z$(sed -n -e 2p subjects)" = "zSubject: [PATCH 2/2] add master" ' +test_expect_success 'in-reply-to but no threading' ' + git send-email \ + --dry-run \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --in-reply-to="<in-reply-id@example.com>" \ + --no-thread \ + $patches | + grep "In-Reply-To: <in-reply-id@example.com>" +' + test_done |